2321 files changed, 239692 insertions, 263974 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index 97ad190e13a..6bf68053e4b 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -122,3 +122,10 @@ Description:
 		This symbolic link appears when a device is a Virtual Function.
 		The symbolic link points to the PCI device sysfs entry of the
 		Physical Function this device associates with.
+
+What:		/sys/bus/pci/slots/.../module
+Date:		June 2009
+Contact:	linux-pci@vger.kernel.org
+Description:
+		This symbolic link points to the PCI hotplug controller driver
+		module that manages the hotplug slot.
diff --git a/Documentation/ABI/testing/sysfs-class-mtd b/Documentation/ABI/testing/sysfs-class-mtd
new file mode 100644
index 00000000000..4d55a188898
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-mtd
@@ -0,0 +1,125 @@
+What:		/sys/class/mtd/
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		The mtd/ class subdirectory belongs to the MTD subsystem
+		(MTD core).
+
+What:		/sys/class/mtd/mtdX/
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		The /sys/class/mtd/mtd{0,1,2,3,...} directories correspond
+		to each /dev/mtdX character device.  These may represent
+		physical/simulated flash devices, partitions on a flash
+		device, or concatenated flash devices.  They exist regardless
+		of whether CONFIG_MTD_CHAR is actually enabled.
+
+What:		/sys/class/mtd/mtdXro/
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		These directories provide the corresponding read-only device
+		nodes for /sys/class/mtd/mtdX/ .  They are only created
+		(for the benefit of udev) if CONFIG_MTD_CHAR is enabled.
+
+What:		/sys/class/mtd/mtdX/dev
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Major and minor numbers of the character device corresponding
+		to this MTD device (in <major>:<minor> format).  This is the
+		read-write device so <minor> will be even.
+
+What:		/sys/class/mtd/mtdXro/dev
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Major and minor numbers of the character device corresponding
+		to the read-only variant of thie MTD device (in
+		<major>:<minor> format).  In this case <minor> will be odd.
+
+What:		/sys/class/mtd/mtdX/erasesize
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		"Major" erase size for the device.  If numeraseregions is
+		zero, this is the eraseblock size for the entire device.
+		Otherwise, the MEMGETREGIONCOUNT/MEMGETREGIONINFO ioctls
+		can be used to determine the actual eraseblock layout.
+
+What:		/sys/class/mtd/mtdX/flags
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		A hexadecimal value representing the device flags, ORed
+		together:
+
+		0x0400: MTD_WRITEABLE - device is writable
+		0x0800: MTD_BIT_WRITEABLE - single bits can be flipped
+		0x1000: MTD_NO_ERASE - no erase necessary
+		0x2000: MTD_POWERUP_LOCK - always locked after reset
+
+What:		/sys/class/mtd/mtdX/name
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		A human-readable ASCII name for the device or partition.
+		This will match the name in /proc/mtd .
+
+What:		/sys/class/mtd/mtdX/numeraseregions
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		For devices that have variable eraseblock sizes, this
+		provides the total number of erase regions.  Otherwise,
+		it will read back as zero.
+
+What:		/sys/class/mtd/mtdX/oobsize
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Number of OOB bytes per page.
+
+What:		/sys/class/mtd/mtdX/size
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Total size of the device/partition, in bytes.
+
+What:		/sys/class/mtd/mtdX/type
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		One of the following ASCII strings, representing the device
+		type:
+
+		absent, ram, rom, nor, nand, dataflash, ubi, unknown
+
+What:		/sys/class/mtd/mtdX/writesize
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Minimal writable flash unit size.  This will always be
+		a positive integer.
+
+		In the case of NOR flash it is 1 (even though individual
+		bits can be cleared).
+
+		In the case of NAND flash it is one NAND page (or a
+		half page, or a quarter page).
+
+		In the case of ECC NOR, it is the ECC block size.
diff --git a/Documentation/ABI/testing/sysfs-fs-ext4 b/Documentation/ABI/testing/sysfs-fs-ext4
index 4e79074de28..5fb709997d9 100644
--- a/Documentation/ABI/testing/sysfs-fs-ext4
+++ b/Documentation/ABI/testing/sysfs-fs-ext4
@@ -79,3 +79,13 @@ Description:
 		This file is read-only and shows the number of
 		kilobytes of data that have been written to this
 		filesystem since it was mounted.
+
+What:		/sys/fs/ext4/<disk>/inode_goal
+Date:		June 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		Tuning parameter which (if non-zero) controls the goal
+		inode used by the inode allocator in p0reference to
+		all other allocation hueristics.  This is intended for
+		debugging use only, and should be 0 on production
+		systems.
diff --git a/Documentation/ABI/testing/sysfs-pps b/Documentation/ABI/testing/sysfs-pps
new file mode 100644
index 00000000000..25028c7bc37
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-pps
@@ -0,0 +1,73 @@
+What:		/sys/class/pps/
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ directory will contain files and
+		directories that will provide a unified interface to
+		the PPS sources.
+
+What:		/sys/class/pps/ppsX/
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ppsX/ directory is related to X-th
+		PPS source into the system. Each directory will
+		contain files to manage and control its PPS source.
+
+What:		/sys/class/pps/ppsX/assert
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ppsX/assert file reports the assert events
+		and the assert sequence number of the X-th source in the form:
+
+			<secs>.<nsec>#<sequence>
+
+		If the source has no assert events the content of this file
+		is empty.
+
+What:		/sys/class/pps/ppsX/clear
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ppsX/clear file reports the clear events
+		and the clear sequence number of the X-th source in the form:
+
+			<secs>.<nsec>#<sequence>
+
+		If the source has no clear events the content of this file
+		is empty.
+
+What:		/sys/class/pps/ppsX/mode
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ppsX/mode file reports the functioning
+		mode of the X-th source in hexadecimal encoding.
+
+		Please, refer to linux/include/linux/pps.h for further
+		info.
+
+What:		/sys/class/pps/ppsX/echo
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ppsX/echo file reports if the X-th does
+		or does not support an "echo" function.
+
+What:		/sys/class/pps/ppsX/name
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ppsX/name file reports the name of the
+		X-th source.
+
+What:		/sys/class/pps/ppsX/path
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ppsX/path file reports the path name of
+		the device connected with the X-th source.
+
+		If the source is not connected with any device the content
+		of this file is empty.
diff --git a/Documentation/Changes b/Documentation/Changes
index 664392481c8..6d0f1efc5bf 100644
--- a/Documentation/Changes
+++ b/Documentation/Changes
@@ -72,6 +72,13 @@ assembling the 16-bit boot code, removing the need for as86 to compile
 your kernel.  This change does, however, mean that you need a recent
 release of binutils.
 
+Perl
+----
+
+You will need perl 5 and the following modules: Getopt::Long, Getopt::Std,
+File::Basename, and File::Find to build the kernel.
+
+
 System utilities
 ================
 
diff --git a/Documentation/PCI/pcieaer-howto.txt b/Documentation/PCI/pcieaer-howto.txt
index ddeb14beacc..be21001ab14 100644
--- a/Documentation/PCI/pcieaer-howto.txt
+++ b/Documentation/PCI/pcieaer-howto.txt
@@ -61,6 +61,10 @@ be initiated although firmwares have no _OSC support. To enable the
 walkaround, pls. add aerdriver.forceload=y to kernel boot parameter line
 when booting kernel. Note that forceload=n by default.
 
+nosourceid, another parameter of type bool, can be used when broken
+hardware (mostly chipsets) has root ports that cannot obtain the reporting
+source ID. nosourceid=n by default.
+
 2.3 AER error output
 When a PCI-E AER error is captured, an error message will be outputed to
 console. If it's a correctable error, it is outputed as a warning.
@@ -246,3 +250,24 @@ with the PCI Express AER Root driver?
 A: It could call the helper functions to enable AER in devices and
 cleanup uncorrectable status register. Pls. refer to section 3.3.
 
+
+4. Software error injection
+
+Debugging PCIE AER error recovery code is quite difficult because it
+is hard to trigger real hardware errors. Software based error
+injection can be used to fake various kinds of PCIE errors.
+
+First you should enable PCIE AER software error injection in kernel
+configuration, that is, following item should be in your .config.
+
+CONFIG_PCIEAER_INJECT=y or CONFIG_PCIEAER_INJECT=m
+
+After reboot with new kernel or insert the module, a device file named
+/dev/aer_inject should be created.
+
+Then, you need a user space tool named aer-inject, which can be gotten
+from:
+    http://www.kernel.org/pub/linux/utils/pci/aer-inject/
+
+More information about aer-inject can be found in the document comes
+with its source code.
diff --git a/Documentation/SubmitChecklist b/Documentation/SubmitChecklist
index ac5e0b2f109..78a9168ff37 100644
--- a/Documentation/SubmitChecklist
+++ b/Documentation/SubmitChecklist
@@ -54,7 +54,7 @@ kernel patches.
     CONFIG_PREEMPT.
 
 14: If the patch affects IO/Disk, etc: has been tested with and without
-    CONFIG_LBD.
+    CONFIG_LBDAF.
 
 15: All codepaths have been exercised with all lockdep features enabled.
 
diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt
index 1a608877b14..23d1262c077 100644
--- a/Documentation/cgroups/memory.txt
+++ b/Documentation/cgroups/memory.txt
@@ -152,14 +152,19 @@ When swap is accounted, following files are added.
 
 usage of mem+swap is limited by memsw.limit_in_bytes.
 
-Note: why 'mem+swap' rather than swap.
+* why 'mem+swap' rather than swap.
 The global LRU(kswapd) can swap out arbitrary pages. Swap-out means
 to move account from memory to swap...there is no change in usage of
-mem+swap.
+mem+swap. In other words, when we want to limit the usage of swap without
+affecting global LRU, mem+swap limit is better than just limiting swap from
+OS point of view.
 
-In other words, when we want to limit the usage of swap without affecting
-global LRU, mem+swap limit is better than just limiting swap from OS point
-of view.
+* What happens when a cgroup hits memory.memsw.limit_in_bytes
+When a cgroup his memory.memsw.limit_in_bytes, it's useless to do swap-out
+in this cgroup. Then, swap-out will not be done by cgroup routine and file
+caches are dropped. But as mentioned above, global LRU can do swapout memory
+from it for sanity of the system's memory management state. You can't forbid
+it by cgroup.
 
 2.5 Reclaim
 
@@ -204,6 +209,7 @@ We can alter the memory limit:
 
 NOTE: We can use a suffix (k, K, m, M, g or G) to indicate values in kilo,
 mega or gigabytes.
+NOTE: We can write "-1" to reset the *.limit_in_bytes(unlimited).
 
 # cat /cgroups/0/memory.limit_in_bytes
 4194304
diff --git a/Documentation/connector/cn_test.c b/Documentation/connector/cn_test.c
index 6977c178729..f688eba8770 100644
--- a/Documentation/connector/cn_test.c
+++ b/Documentation/connector/cn_test.c
@@ -41,6 +41,12 @@ void cn_test_callback(void *data)
 	       msg->seq, msg->ack, msg->len, (char *)msg->data);
 }
 
+/*
+ * Do not remove this function even if no one is using it as
+ * this is an example of how to get notifications about new
+ * connector user registration
+ */
+#if 0
 static int cn_test_want_notify(void)
 {
 	struct cn_ctl_msg *ctl;
@@ -117,6 +123,7 @@ nlmsg_failure:
 	kfree_skb(skb);
 	return -EINVAL;
 }
+#endif
 
 static u32 cn_test_timer_counter;
 static void cn_test_timer_func(unsigned long __data)
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 7129846a278..f8cd450be9a 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -6,6 +6,20 @@ be removed from this file.
 
 ---------------------------
 
+What:	IRQF_SAMPLE_RANDOM
+Check:	IRQF_SAMPLE_RANDOM
+When:	July 2009
+
+Why:	Many of IRQF_SAMPLE_RANDOM users are technically bogus as entropy
+	sources in the kernel's current entropy model. To resolve this, every
+	input point to the kernel's entropy pool needs to better document the
+	type of entropy source it actually is. This will be replaced with
+	additional add_*_randomness functions in drivers/char/random.c
+
+Who:	Robin Getz <rgetz@blackfin.uclinux.org> & Matt Mackall <mpm@selenic.com>
+
+---------------------------
+
 What:	The ieee80211_regdom module parameter
 When:	March 2010 / desktop catchup
 
@@ -354,16 +368,6 @@ Who:  Krzysztof Piotr Oledzki <ole@ans.pl>
 
 ---------------------------
 
-What:	i2c_attach_client(), i2c_detach_client(), i2c_driver->detach_client(),
-	i2c_adapter->client_register(), i2c_adapter->client_unregister
-When:	2.6.30
-Check:	i2c_attach_client i2c_detach_client
-Why:	Deprecated by the new (standard) device driver binding model. Use
-	i2c_driver->probe() and ->remove() instead.
-Who:	Jean Delvare <khali@linux-fr.org>
-
----------------------------
-
 What:	fscher and fscpos drivers
 When:	June 2009
 Why:	Deprecated by the new fschmd driver.
diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX
index 8dd6db76171..f15621ee559 100644
--- a/Documentation/filesystems/00-INDEX
+++ b/Documentation/filesystems/00-INDEX
@@ -66,6 +66,10 @@ mandatory-locking.txt
 	- info on the Linux implementation of Sys V mandatory file locking.
 ncpfs.txt
 	- info on Novell Netware(tm) filesystem using NCP protocol.
+nfs41-server.txt
+	- info on the Linux server implementation of NFSv4 minor version 1.
+nfs-rdma.txt
+	- how to install and setup the Linux NFS/RDMA client and server software.
 nfsroot.txt
 	- short guide on setting up a diskless box with NFS root filesystem.
 nilfs2.txt
diff --git a/Documentation/filesystems/ext2.txt b/Documentation/filesystems/ext2.txt
index e055acb6b2d..67639f905f1 100644
--- a/Documentation/filesystems/ext2.txt
+++ b/Documentation/filesystems/ext2.txt
@@ -322,7 +322,7 @@ an upper limit on the block size imposed by the page size of the kernel,
 so 8kB blocks are only allowed on Alpha systems (and other architectures
 which support larger pages).
 
-There is an upper limit of 32768 subdirectories in a single directory.
+There is an upper limit of 32000 subdirectories in a single directory.
 
 There is a "soft" upper limit of about 10-15k files in a single directory
 with the current linear linked-list directory implementation.  This limit
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index 608fdba97b7..7be02ac5fa3 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -235,6 +235,10 @@ minixdf			Make 'df' act like Minix.
 
 debug			Extra debugging information is sent to syslog.
 
+abort			Simulate the effects of calling ext4_abort() for
+			debugging purposes.  This is normally used while
+			remounting a filesystem which is already mounted.
+
 errors=remount-ro	Remount the filesystem read-only on an error.
 errors=continue		Keep going on a filesystem error.
 errors=panic		Panic and halt the machine if an error occurs.
diff --git a/Documentation/filesystems/isofs.txt b/Documentation/filesystems/isofs.txt
index 6973b980ca2..3c367c3b360 100644
--- a/Documentation/filesystems/isofs.txt
+++ b/Documentation/filesystems/isofs.txt
@@ -23,8 +23,13 @@ Mount options unique to the isofs filesystem.
   map=off       Do not map non-Rock Ridge filenames to lower case
   map=normal    Map non-Rock Ridge filenames to lower case
   map=acorn     As map=normal but also apply Acorn extensions if present
-  mode=xxx      Sets the permissions on files to xxx
-  dmode=xxx     Sets the permissions on directories to xxx
+  mode=xxx      Sets the permissions on files to xxx unless Rock Ridge
+		extensions set the permissions otherwise
+  dmode=xxx     Sets the permissions on directories to xxx unless Rock Ridge
+		extensions set the permissions otherwise
+  overriderockperm Set permissions on files and directories according to
+		'mode' and 'dmode' even though Rock Ridge extensions are
+		present.
   nojoliet      Ignore Joliet extensions if they are present.
   norock        Ignore Rock Ridge extensions if they are present.
   hide		Completely strip hidden files from the file system.
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index ebff3c10a07..fad18f9456e 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -5,11 +5,12 @@
                   Bodo Bauer <bb@ricochet.net>
 
 2.4.x update	  Jorge Nerin <comandante@zaralinux.com>      November 14 2000
-move /proc/sys	  Shen Feng <shen@cn.fujitsu.com>		    April 1 2009
+move /proc/sys	  Shen Feng <shen@cn.fujitsu.com>		  April 1 2009
 ------------------------------------------------------------------------------
 Version 1.3                                              Kernel version 2.2.12
 					      Kernel version 2.4.0-test11-pre4
 ------------------------------------------------------------------------------
+fixes/update part 1.1  Stefani Seibold <stefani@seibold.net>       June 9 2009
 
 Table of Contents
 -----------------
@@ -116,7 +117,7 @@ The link  self  points  to  the  process reading the file system. Each process
 subdirectory has the entries listed in Table 1-1.
 
 
-Table 1-1: Process specific entries in /proc 
+Table 1-1: Process specific entries in /proc
 ..............................................................................
  File		Content
  clear_refs	Clears page referenced bits shown in smaps output
@@ -134,46 +135,103 @@ Table 1-1: Process specific entries in /proc
  status		Process status in human readable form
  wchan		If CONFIG_KALLSYMS is set, a pre-decoded wchan
  stack		Report full stack trace, enable via CONFIG_STACKTRACE
- smaps		Extension based on maps, the rss size for each mapped file
+ smaps		a extension based on maps, showing the memory consumption of
+		each mapping
 ..............................................................................
 
 For example, to get the status information of a process, all you have to do is
 read the file /proc/PID/status:
 
-  >cat /proc/self/status 
-  Name:   cat 
-  State:  R (running) 
-  Pid:    5452 
-  PPid:   743 
+  >cat /proc/self/status
+  Name:   cat
+  State:  R (running)
+  Tgid:   5452
+  Pid:    5452
+  PPid:   743
   TracerPid:      0						(2.4)
-  Uid:    501     501     501     501 
-  Gid:    100     100     100     100 
-  Groups: 100 14 16 
-  VmSize:     1112 kB 
-  VmLck:         0 kB 
-  VmRSS:       348 kB 
-  VmData:       24 kB 
-  VmStk:        12 kB 
-  VmExe:         8 kB 
-  VmLib:      1044 kB 
-  SigPnd: 0000000000000000 
-  SigBlk: 0000000000000000 
-  SigIgn: 0000000000000000 
-  SigCgt: 0000000000000000 
-  CapInh: 00000000fffffeff 
-  CapPrm: 0000000000000000 
-  CapEff: 0000000000000000 
-
+  Uid:    501     501     501     501
+  Gid:    100     100     100     100
+  FDSize: 256
+  Groups: 100 14 16
+  VmPeak:     5004 kB
+  VmSize:     5004 kB
+  VmLck:         0 kB
+  VmHWM:       476 kB
+  VmRSS:       476 kB
+  VmData:      156 kB
+  VmStk:        88 kB
+  VmExe:        68 kB
+  VmLib:      1412 kB
+  VmPTE:        20 kb
+  Threads:        1
+  SigQ:   0/28578
+  SigPnd: 0000000000000000
+  ShdPnd: 0000000000000000
+  SigBlk: 0000000000000000
+  SigIgn: 0000000000000000
+  SigCgt: 0000000000000000
+  CapInh: 00000000fffffeff
+  CapPrm: 0000000000000000
+  CapEff: 0000000000000000
+  CapBnd: ffffffffffffffff
+  voluntary_ctxt_switches:        0
+  nonvoluntary_ctxt_switches:     1
 
 This shows you nearly the same information you would get if you viewed it with
 the ps  command.  In  fact,  ps  uses  the  proc  file  system  to  obtain its
-information. The  statm  file  contains  more  detailed  information about the
-process memory usage. Its seven fields are explained in Table 1-2.  The stat
-file contains details information about the process itself.  Its fields are
-explained in Table 1-3.
+information.  But you get a more detailed  view of the  process by reading the
+file /proc/PID/status. It fields are described in table 1-2.
+
+The  statm  file  contains  more  detailed  information about the process
+memory usage. Its seven fields are explained in Table 1-3.  The stat file
+contains details information about the process itself.  Its fields are
+explained in Table 1-4.
 
+Table 1-2: Contents of the statm files (as of 2.6.30-rc7)
+..............................................................................
+ Field                       Content
+ Name                        filename of the executable
+ State                       state (R is running, S is sleeping, D is sleeping
+                             in an uninterruptible wait, Z is zombie,
+			     T is traced or stopped)
+ Tgid                        thread group ID
+ Pid                         process id
+ PPid                        process id of the parent process
+ TracerPid                   PID of process tracing this process (0 if not)
+ Uid                         Real, effective, saved set, and  file system UIDs
+ Gid                         Real, effective, saved set, and  file system GIDs
+ FDSize                      number of file descriptor slots currently allocated
+ Groups                      supplementary group list
+ VmPeak                      peak virtual memory size
+ VmSize                      total program size
+ VmLck                       locked memory size
+ VmHWM                       peak resident set size ("high water mark")
+ VmRSS                       size of memory portions
+ VmData                      size of data, stack, and text segments
+ VmStk                       size of data, stack, and text segments
+ VmExe                       size of text segment
+ VmLib                       size of shared library code
+ VmPTE                       size of page table entries
+ Threads                     number of threads
+ SigQ                        number of signals queued/max. number for queue
+ SigPnd                      bitmap of pending signals for the thread
+ ShdPnd                      bitmap of shared pending signals for the process
+ SigBlk                      bitmap of blocked signals
+ SigIgn                      bitmap of ignored signals
+ SigCgt                      bitmap of catched signals
+ CapInh                      bitmap of inheritable capabilities
+ CapPrm                      bitmap of permitted capabilities
+ CapEff                      bitmap of effective capabilities
+ CapBnd                      bitmap of capabilities bounding set
+ Cpus_allowed                mask of CPUs on which this process may run
+ Cpus_allowed_list           Same as previous, but in "list format"
+ Mems_allowed                mask of memory nodes allowed to this process
+ Mems_allowed_list           Same as previous, but in "list format"
+ voluntary_ctxt_switches     number of voluntary context switches
+ nonvoluntary_ctxt_switches  number of non voluntary context switches
+..............................................................................
 
-Table 1-2: Contents of the statm files (as of 2.6.8-rc3)
+Table 1-3: Contents of the statm files (as of 2.6.8-rc3)
 ..............................................................................
  Field    Content
  size     total program size (pages)		(same as VmSize in status)
@@ -188,7 +246,7 @@ Table 1-2: Contents of the statm files (as of 2.6.8-rc3)
 ..............................................................................
 
 
-Table 1-3: Contents of the stat files (as of 2.6.22-rc3)
+Table 1-4: Contents of the stat files (as of 2.6.30-rc7)
 ..............................................................................
  Field          Content
   pid           process id
@@ -222,10 +280,10 @@ Table 1-3: Contents of the stat files (as of 2.6.22-rc3)
   start_stack   address of the start of the stack
   esp           current value of ESP
   eip           current value of EIP
-  pending       bitmap of pending signals (obsolete)
-  blocked       bitmap of blocked signals (obsolete)
-  sigign        bitmap of ignored signals (obsolete)
-  sigcatch      bitmap of catched signals (obsolete)
+  pending       bitmap of pending signals
+  blocked       bitmap of blocked signals
+  sigign        bitmap of ignored signals
+  sigcatch      bitmap of catched signals
   wchan         address where process went to sleep
   0             (place holder)
   0             (place holder)
@@ -234,19 +292,99 @@ Table 1-3: Contents of the stat files (as of 2.6.22-rc3)
   rt_priority   realtime priority
   policy        scheduling policy (man sched_setscheduler)
   blkio_ticks   time spent waiting for block IO
+  gtime         guest time of the task in jiffies
+  cgtime        guest time of the task children in jiffies
 ..............................................................................
 
+The /proc/PID/map file containing the currently mapped memory regions and
+their access permissions.
+
+The format is:
+
+address           perms offset  dev   inode      pathname
+
+08048000-08049000 r-xp 00000000 03:00 8312       /opt/test
+08049000-0804a000 rw-p 00001000 03:00 8312       /opt/test
+0804a000-0806b000 rw-p 00000000 00:00 0          [heap]
+a7cb1000-a7cb2000 ---p 00000000 00:00 0
+a7cb2000-a7eb2000 rw-p 00000000 00:00 0
+a7eb2000-a7eb3000 ---p 00000000 00:00 0
+a7eb3000-a7ed5000 rw-p 00000000 00:00 0
+a7ed5000-a8008000 r-xp 00000000 03:00 4222       /lib/libc.so.6
+a8008000-a800a000 r--p 00133000 03:00 4222       /lib/libc.so.6
+a800a000-a800b000 rw-p 00135000 03:00 4222       /lib/libc.so.6
+a800b000-a800e000 rw-p 00000000 00:00 0
+a800e000-a8022000 r-xp 00000000 03:00 14462      /lib/libpthread.so.0
+a8022000-a8023000 r--p 00013000 03:00 14462      /lib/libpthread.so.0
+a8023000-a8024000 rw-p 00014000 03:00 14462      /lib/libpthread.so.0
+a8024000-a8027000 rw-p 00000000 00:00 0
+a8027000-a8043000 r-xp 00000000 03:00 8317       /lib/ld-linux.so.2
+a8043000-a8044000 r--p 0001b000 03:00 8317       /lib/ld-linux.so.2
+a8044000-a8045000 rw-p 0001c000 03:00 8317       /lib/ld-linux.so.2
+aff35000-aff4a000 rw-p 00000000 00:00 0          [stack]
+ffffe000-fffff000 r-xp 00000000 00:00 0          [vdso]
+
+where "address" is the address space in the process that it occupies, "perms"
+is a set of permissions:
+
+ r = read
+ w = write
+ x = execute
+ s = shared
+ p = private (copy on write)
+
+"offset" is the offset into the mapping, "dev" is the device (major:minor), and
+"inode" is the inode  on that device.  0 indicates that  no inode is associated
+with the memory region, as the case would be with BSS (uninitialized data).
+The "pathname" shows the name associated file for this mapping.  If the mapping
+is not associated with a file:
+
+ [heap]                   = the heap of the program
+ [stack]                  = the stack of the main process
+ [vdso]                   = the "virtual dynamic shared object",
+                            the kernel system call handler
+
+ or if empty, the mapping is anonymous.
+
+
+The /proc/PID/smaps is an extension based on maps, showing the memory
+consumption for each of the process's mappings. For each of mappings there
+is a series of lines such as the following:
+
+08048000-080bc000 r-xp 00000000 03:02 13130      /bin/bash
+Size:               1084 kB
+Rss:                 892 kB
+Pss:                 374 kB
+Shared_Clean:        892 kB
+Shared_Dirty:          0 kB
+Private_Clean:         0 kB
+Private_Dirty:         0 kB
+Referenced:          892 kB
+Swap:                  0 kB
+KernelPageSize:        4 kB
+MMUPageSize:           4 kB
+
+The first  of these lines shows  the same information  as is displayed for the
+mapping in /proc/PID/maps.  The remaining lines show  the size of the mapping,
+the amount of the mapping that is currently resident in RAM, the "proportional
+set size� (divide each shared page by the number of processes sharing it), the
+number of clean and dirty shared pages in the mapping, and the number of clean
+and dirty private pages in the mapping.  The "Referenced" indicates the amount
+of memory currently marked as referenced or accessed.
+
+This file is only present if the CONFIG_MMU kernel configuration option is
+enabled.
 
 1.2 Kernel data
 ---------------
 
 Similar to  the  process entries, the kernel data files give information about
 the running kernel. The files used to obtain this information are contained in
-/proc and  are  listed  in Table 1-4. Not all of these will be present in your
+/proc and  are  listed  in Table 1-5. Not all of these will be present in your
 system. It  depends  on the kernel configuration and the loaded modules, which
 files are there, and which are missing.
 
-Table 1-4: Kernel info in /proc
+Table 1-5: Kernel info in /proc
 ..............................................................................
  File        Content                                           
  apm         Advanced power management info                    
@@ -283,6 +421,7 @@ Table 1-4: Kernel info in /proc
  rtc         Real time clock                                   
  scsi        SCSI info (see text)                              
  slabinfo    Slab pool info                                    
+ softirqs    softirq usage
  stat        Overall statistics                                
  swaps       Swap space utilization                            
  sys         See chapter 2                                     
@@ -597,6 +736,25 @@ on the kind of area :
 0xffffffffa0017000-0xffffffffa0022000   45056 sys_init_module+0xc27/0x1d00 ...
    pages=10 vmalloc N0=10
 
+..............................................................................
+
+softirqs:
+
+Provides counts of softirq handlers serviced since boot time, for each cpu.
+
+> cat /proc/softirqs
+                CPU0       CPU1       CPU2       CPU3
+      HI:          0          0          0          0
+   TIMER:      27166      27120      27097      27034
+  NET_TX:          0          0          0         17
+  NET_RX:         42          0          0         39
+   BLOCK:          0          0        107       1121
+ TASKLET:          0          0          0        290
+   SCHED:      27035      26983      26971      26746
+ HRTIMER:          0          0          0          0
+     RCU:       1678       1769       2178       2250
+
+
 1.3 IDE devices in /proc/ide
 ----------------------------
 
@@ -614,10 +772,10 @@ IDE devices:
 
 More detailed  information  can  be  found  in  the  controller  specific
 subdirectories. These  are  named  ide0,  ide1  and  so  on.  Each  of  these
-directories contains the files shown in table 1-5.
+directories contains the files shown in table 1-6.
 
 
-Table 1-5: IDE controller info in  /proc/ide/ide?
+Table 1-6: IDE controller info in  /proc/ide/ide?
 ..............................................................................
  File    Content                                 
  channel IDE channel (0 or 1)                    
@@ -627,11 +785,11 @@ Table 1-5: IDE controller info in  /proc/ide/ide?
 ..............................................................................
 
 Each device  connected  to  a  controller  has  a separate subdirectory in the
-controllers directory.  The  files  listed in table 1-6 are contained in these
+controllers directory.  The  files  listed in table 1-7 are contained in these
 directories.
 
 
-Table 1-6: IDE device information
+Table 1-7: IDE device information
 ..............................................................................
  File             Content                                    
  cache            The cache                                  
@@ -673,12 +831,12 @@ the drive parameters:
 1.4 Networking info in /proc/net
 --------------------------------
 
-The subdirectory  /proc/net  follows  the  usual  pattern. Table 1-6 shows the
+The subdirectory  /proc/net  follows  the  usual  pattern. Table 1-8 shows the
 additional values  you  get  for  IP  version 6 if you configure the kernel to
-support this. Table 1-7 lists the files and their meaning.
+support this. Table 1-9 lists the files and their meaning.
 
 
-Table 1-6: IPv6 info in /proc/net 
+Table 1-8: IPv6 info in /proc/net
 ..............................................................................
  File       Content                                               
  udp6       UDP sockets (IPv6)                                    
@@ -693,7 +851,7 @@ Table 1-6: IPv6 info in /proc/net
 ..............................................................................
 
 
-Table 1-7: Network info in /proc/net 
+Table 1-9: Network info in /proc/net
 ..............................................................................
  File          Content                                                         
  arp           Kernel  ARP table                                               
@@ -817,10 +975,10 @@ The directory  /proc/parport  contains information about the parallel ports of
 your system.  It  has  one  subdirectory  for  each port, named after the port
 number (0,1,2,...).
 
-These directories contain the four files shown in Table 1-8.
+These directories contain the four files shown in Table 1-10.
 
 
-Table 1-8: Files in /proc/parport 
+Table 1-10: Files in /proc/parport
 ..............................................................................
  File      Content                                                             
  autoprobe Any IEEE-1284 device ID information that has been acquired.         
@@ -838,10 +996,10 @@ Table 1-8: Files in /proc/parport
 
 Information about  the  available  and actually used tty's can be found in the
 directory /proc/tty.You'll  find  entries  for drivers and line disciplines in
-this directory, as shown in Table 1-9.
+this directory, as shown in Table 1-11.
 
 
-Table 1-9: Files in /proc/tty 
+Table 1-11: Files in /proc/tty
 ..............................................................................
  File          Content                                        
  drivers       list of drivers and their usage                
@@ -883,6 +1041,7 @@ since the system first booted.  For a quick look, simply cat the file:
   processes 2915
   procs_running 1
   procs_blocked 0
+  softirq 183433 0 21755 12 39 1137 231 21459 2263
 
 The very first  "cpu" line aggregates the  numbers in all  of the other "cpuN"
 lines.  These numbers identify the amount of time the CPU has spent performing
@@ -918,6 +1077,11 @@ CPUs.
 The   "procs_blocked" line gives  the  number of  processes currently blocked,
 waiting for I/O to complete.
 
+The "softirq" line gives counts of softirqs serviced since boot time, for each
+of the possible system softirqs. The first column is the total of all
+softirqs serviced; each subsequent column is the total for that particular
+softirq.
+
 
 1.9 Ext4 file system parameters
 ------------------------------
@@ -926,9 +1090,9 @@ Information about mounted ext4 file systems can be found in
 /proc/fs/ext4.  Each mounted filesystem will have a directory in
 /proc/fs/ext4 based on its device name (i.e., /proc/fs/ext4/hdc or
 /proc/fs/ext4/dm-0).   The files in each per-device directory are shown
-in Table 1-10, below.
+in Table 1-12, below.
 
-Table 1-10: Files in /proc/fs/ext4/<devname>
+Table 1-12: Files in /proc/fs/ext4/<devname>
 ..............................................................................
  File            Content                                        
  mb_groups       details of multiblock allocator buddy cache of free blocks
diff --git a/Documentation/gcov.txt b/Documentation/gcov.txt
new file mode 100644
index 00000000000..e716aadb3a3
--- /dev/null
+++ b/Documentation/gcov.txt
@@ -0,0 +1,246 @@
+Using gcov with the Linux kernel
+================================
+
+1. Introduction
+2. Preparation
+3. Customization
+4. Files
+5. Modules
+6. Separated build and test machines
+7. Troubleshooting
+Appendix A: sample script: gather_on_build.sh
+Appendix B: sample script: gather_on_test.sh
+
+
+1. Introduction
+===============
+
+gcov profiling kernel support enables the use of GCC's coverage testing
+tool gcov [1] with the Linux kernel. Coverage data of a running kernel
+is exported in gcov-compatible format via the "gcov" debugfs directory.
+To get coverage data for a specific file, change to the kernel build
+directory and use gcov with the -o option as follows (requires root):
+
+# cd /tmp/linux-out
+# gcov -o /sys/kernel/debug/gcov/tmp/linux-out/kernel spinlock.c
+
+This will create source code files annotated with execution counts
+in the current directory. In addition, graphical gcov front-ends such
+as lcov [2] can be used to automate the process of collecting data
+for the entire kernel and provide coverage overviews in HTML format.
+
+Possible uses:
+
+* debugging (has this line been reached at all?)
+* test improvement (how do I change my test to cover these lines?)
+* minimizing kernel configurations (do I need this option if the
+  associated code is never run?)
+
+--
+
+[1] http://gcc.gnu.org/onlinedocs/gcc/Gcov.html
+[2] http://ltp.sourceforge.net/coverage/lcov.php
+
+
+2. Preparation
+==============
+
+Configure the kernel with:
+
+        CONFIG_DEBUGFS=y
+        CONFIG_GCOV_KERNEL=y
+
+and to get coverage data for the entire kernel:
+
+        CONFIG_GCOV_PROFILE_ALL=y
+
+Note that kernels compiled with profiling flags will be significantly
+larger and run slower. Also CONFIG_GCOV_PROFILE_ALL may not be supported
+on all architectures.
+
+Profiling data will only become accessible once debugfs has been
+mounted:
+
+        mount -t debugfs none /sys/kernel/debug
+
+
+3. Customization
+================
+
+To enable profiling for specific files or directories, add a line
+similar to the following to the respective kernel Makefile:
+
+        For a single file (e.g. main.o):
+                GCOV_PROFILE_main.o := y
+
+        For all files in one directory:
+                GCOV_PROFILE := y
+
+To exclude files from being profiled even when CONFIG_GCOV_PROFILE_ALL
+is specified, use:
+
+                GCOV_PROFILE_main.o := n
+        and:
+                GCOV_PROFILE := n
+
+Only files which are linked to the main kernel image or are compiled as
+kernel modules are supported by this mechanism.
+
+
+4. Files
+========
+
+The gcov kernel support creates the following files in debugfs:
+
+        /sys/kernel/debug/gcov
+                Parent directory for all gcov-related files.
+
+        /sys/kernel/debug/gcov/reset
+                Global reset file: resets all coverage data to zero when
+                written to.
+
+        /sys/kernel/debug/gcov/path/to/compile/dir/file.gcda
+                The actual gcov data file as understood by the gcov
+                tool. Resets file coverage data to zero when written to.
+
+        /sys/kernel/debug/gcov/path/to/compile/dir/file.gcno
+                Symbolic link to a static data file required by the gcov
+                tool. This file is generated by gcc when compiling with
+                option -ftest-coverage.
+
+
+5. Modules
+==========
+
+Kernel modules may contain cleanup code which is only run during
+module unload time. The gcov mechanism provides a means to collect
+coverage data for such code by keeping a copy of the data associated
+with the unloaded module. This data remains available through debugfs.
+Once the module is loaded again, the associated coverage counters are
+initialized with the data from its previous instantiation.
+
+This behavior can be deactivated by specifying the gcov_persist kernel
+parameter:
+
+        gcov_persist=0
+
+At run-time, a user can also choose to discard data for an unloaded
+module by writing to its data file or the global reset file.
+
+
+6. Separated build and test machines
+====================================
+
+The gcov kernel profiling infrastructure is designed to work out-of-the
+box for setups where kernels are built and run on the same machine. In
+cases where the kernel runs on a separate machine, special preparations
+must be made, depending on where the gcov tool is used:
+
+a) gcov is run on the TEST machine
+
+The gcov tool version on the test machine must be compatible with the
+gcc version used for kernel build. Also the following files need to be
+copied from build to test machine:
+
+from the source tree:
+  - all C source files + headers
+
+from the build tree:
+  - all C source files + headers
+  - all .gcda and .gcno files
+  - all links to directories
+
+It is important to note that these files need to be placed into the
+exact same file system location on the test machine as on the build
+machine. If any of the path components is symbolic link, the actual
+directory needs to be used instead (due to make's CURDIR handling).
+
+b) gcov is run on the BUILD machine
+
+The following files need to be copied after each test case from test
+to build machine:
+
+from the gcov directory in sysfs:
+  - all .gcda files
+  - all links to .gcno files
+
+These files can be copied to any location on the build machine. gcov
+must then be called with the -o option pointing to that directory.
+
+Example directory setup on the build machine:
+
+  /tmp/linux:    kernel source tree
+  /tmp/out:      kernel build directory as specified by make O=
+  /tmp/coverage: location of the files copied from the test machine
+
+  [user@build] cd /tmp/out
+  [user@build] gcov -o /tmp/coverage/tmp/out/init main.c
+
+
+7. Troubleshooting
+==================
+
+Problem:  Compilation aborts during linker step.
+Cause:    Profiling flags are specified for source files which are not
+          linked to the main kernel or which are linked by a custom
+          linker procedure.
+Solution: Exclude affected source files from profiling by specifying
+          GCOV_PROFILE := n or GCOV_PROFILE_basename.o := n in the
+          corresponding Makefile.
+
+
+Appendix A: gather_on_build.sh
+==============================
+
+Sample script to gather coverage meta files on the build machine
+(see 6a):
+
+#!/bin/bash
+
+KSRC=$1
+KOBJ=$2
+DEST=$3
+
+if [ -z "$KSRC" ] || [ -z "$KOBJ" ] || [ -z "$DEST" ]; then
+  echo "Usage: $0 <ksrc directory> <kobj directory> <output.tar.gz>" >&2
+  exit 1
+fi
+
+KSRC=$(cd $KSRC; printf "all:\n\t@echo \${CURDIR}\n" | make -f -)
+KOBJ=$(cd $KOBJ; printf "all:\n\t@echo \${CURDIR}\n" | make -f -)
+
+find $KSRC $KOBJ \( -name '*.gcno' -o -name '*.[ch]' -o -type l \) -a \
+                 -perm /u+r,g+r | tar cfz $DEST -P -T -
+
+if [ $? -eq 0 ] ; then
+  echo "$DEST successfully created, copy to test system and unpack with:"
+  echo "  tar xfz $DEST -P"
+else
+  echo "Could not create file $DEST"
+fi
+
+
+Appendix B: gather_on_test.sh
+=============================
+
+Sample script to gather coverage data files on the test machine
+(see 6b):
+
+#!/bin/bash
+
+DEST=$1
+GCDA=/sys/kernel/debug/gcov
+
+if [ -z "$DEST" ] ; then
+  echo "Usage: $0 <output.tar.gz>" >&2
+  exit 1
+fi
+
+find $GCDA -name '*.gcno' -o -name '*.gcda' | tar cfz $DEST -T -
+
+if [ $? -eq 0 ] ; then
+  echo "$DEST successfully created, copy to build system and unpack with:"
+  echo "  tar xfz $DEST"
+else
+  echo "Could not create file $DEST"
+fi
diff --git a/Documentation/i2c/instantiating-devices b/Documentation/i2c/instantiating-devices
index b55ce57a84d..c740b7b4108 100644
--- a/Documentation/i2c/instantiating-devices
+++ b/Documentation/i2c/instantiating-devices
@@ -165,3 +165,47 @@ was done there. Two significant differences are:
 Once again, method 3 should be avoided wherever possible. Explicit device
 instantiation (methods 1 and 2) is much preferred for it is safer and
 faster.
+
+
+Method 4: Instantiate from user-space
+-------------------------------------
+
+In general, the kernel should know which I2C devices are connected and
+what addresses they live at. However, in certain cases, it does not, so a
+sysfs interface was added to let the user provide the information. This
+interface is made of 2 attribute files which are created in every I2C bus
+directory: new_device and delete_device. Both files are write only and you
+must write the right parameters to them in order to properly instantiate,
+respectively delete, an I2C device.
+
+File new_device takes 2 parameters: the name of the I2C device (a string)
+and the address of the I2C device (a number, typically expressed in
+hexadecimal starting with 0x, but can also be expressed in decimal.)
+
+File delete_device takes a single parameter: the address of the I2C
+device. As no two devices can live at the same address on a given I2C
+segment, the address is sufficient to uniquely identify the device to be
+deleted.
+
+Example:
+# echo eeprom 0x50 > /sys/class/i2c-adapter/i2c-3/new_device
+
+While this interface should only be used when in-kernel device declaration
+can't be done, there is a variety of cases where it can be helpful:
+* The I2C driver usually detects devices (method 3 above) but the bus
+  segment your device lives on doesn't have the proper class bit set and
+  thus detection doesn't trigger.
+* The I2C driver usually detects devices, but your device lives at an
+  unexpected address.
+* The I2C driver usually detects devices, but your device is not detected,
+  either because the detection routine is too strict, or because your
+  device is not officially supported yet but you know it is compatible.
+* You are developing a driver on a test board, where you soldered the I2C
+  device yourself.
+
+This interface is a replacement for the force_* module parameters some I2C
+drivers implement. Being implemented in i2c-core rather than in each
+device driver individually, it is much more efficient, and also has the
+advantage that you do not have to reload the driver to change a setting.
+You can also instantiate the device before the driver is loaded or even
+available, and you don't need to know what driver the device needs.
diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients
index c1a06f989cf..7860aafb483 100644
--- a/Documentation/i2c/writing-clients
+++ b/Documentation/i2c/writing-clients
@@ -126,19 +126,9 @@ different) configuration information, as do drivers handling chip variants
 that can't be distinguished by protocol probing, or which need some board
 specific information to operate correctly.
 
-Accordingly, the I2C stack now has two models for associating I2C devices
-with their drivers:  the original "legacy" model, and a newer one that's
-fully compatible with the Linux 2.6 driver model.  These models do not mix,
-since the "legacy" model requires drivers to create "i2c_client" device
-objects after SMBus style probing, while the Linux driver model expects
-drivers to be given such device objects in their probe() routines.
 
-The legacy model is deprecated now and will soon be removed, so we no
-longer document it here.
-
-
-Standard Driver Model Binding ("New Style")
--------------------------------------------
+Device/Driver Binding
+---------------------
 
 System infrastructure, typically board-specific initialization code or
 boot firmware, reports what I2C devices exist.  For example, there may be
@@ -201,7 +191,7 @@ a given I2C bus.  This is for example the case of hardware monitoring
 devices on a PC's SMBus.  In that case, you may want to let your driver
 detect supported devices automatically.  This is how the legacy model
 was working, and is now available as an extension to the standard
-driver model (so that we can finally get rid of the legacy model.)
+driver model.
 
 You simply have to define a detect callback which will attempt to
 identify supported devices (returning 0 for supported ones and -ENODEV
diff --git a/Documentation/input/input.txt b/Documentation/input/input.txt
index 686ee9932df..b93c08442e3 100644
--- a/Documentation/input/input.txt
+++ b/Documentation/input/input.txt
@@ -278,7 +278,7 @@ struct input_event {
 };
 
   'time' is the timestamp, it returns the time at which the event happened.
-Type is for example EV_REL for relative moment, REL_KEY for a keypress or
+Type is for example EV_REL for relative moment, EV_KEY for a keypress or
 release. More types are defined in include/linux/input.h.
 
   'code' is event code, for example REL_X or KEY_BACKSPACE, again a complete
diff --git a/Documentation/input/rotary-encoder.txt b/Documentation/input/rotary-encoder.txt
index 435102a26d9..3a6aec40c0b 100644
--- a/Documentation/input/rotary-encoder.txt
+++ b/Documentation/input/rotary-encoder.txt
@@ -67,7 +67,12 @@ data with it.
 struct rotary_encoder_platform_data is declared in
 include/linux/rotary-encoder.h and needs to be filled with the number of
 steps the encoder has and can carry information about externally inverted
-signals (because of used invertig buffer or other reasons).
+signals (because of an inverting buffer or other reasons). The encoder
+can be set up to deliver input information as either an absolute or relative
+axes. For relative axes the input event returns +/-1 for each step. For
+absolute axes the position of the encoder can either roll over between zero
+and the number of steps or will clamp at the maximum and zero depending on
+the configuration.
 
 Because GPIO to IRQ mapping is platform specific, this information must
 be given in seperately to the driver. See the example below.
@@ -85,6 +90,8 @@ be given in seperately to the driver. See the example below.
 static struct rotary_encoder_platform_data my_rotary_encoder_info = {
 	.steps		= 24,
 	.axis		= ABS_X,
+	.relative_axis	= false,
+	.rollover	= false,
 	.gpio_a		= GPIO_ROTARY_A,
 	.gpio_b		= GPIO_ROTARY_B,
 	.inverted_a	= 0,
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index 1f779a25c70..7bb0d934b6d 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -149,6 +149,8 @@ Code	Seq#	Include File		Comments
 'p'	40-7F	linux/nvram.h
 'p'	80-9F				user-space parport
 					<mailto:tim@cyberelk.net>
+'p'	a1-a4	linux/pps.h		LinuxPPS
+					<mailto:giometti@linux.it>
 'q'	00-1F	linux/serio.h
 'q'	80-FF				Internet PhoneJACK, Internet LineJACK
 					<http://www.quicknet.net>
diff --git a/Documentation/isdn/00-INDEX b/Documentation/isdn/00-INDEX
index f6010a53659..e87e336f590 100644
--- a/Documentation/isdn/00-INDEX
+++ b/Documentation/isdn/00-INDEX
@@ -14,25 +14,14 @@ README
 	- general info on what you need and what to do for Linux ISDN.
 README.FAQ
 	- general info for FAQ.
-README.audio
-	- info for running audio over ISDN.
-README.fax
-	- info for using Fax over ISDN.
-README.gigaset
-	- info on the drivers for Siemens Gigaset ISDN adapters.
-README.icn
-	- info on the ICN-ISDN-card and its driver.
->>>>>>> 93af7aca44f0e82e67bda10a0fb73d383edcc8bd:Documentation/isdn/00-INDEX
 README.HiSax
 	- info on the HiSax driver which replaces the old teles.
+README.act2000
+	- info on driver for IBM ACT-2000 card.
 README.audio
 	- info for running audio over ISDN.
 README.avmb1
 	- info on driver for AVM-B1 ISDN card.
-README.act2000
-	- info on driver for IBM ACT-2000 card.
-README.eicon
-	- info on driver for Eicon active cards.
 README.concap
 	- info on "CONCAP" encapsulation protocol interface used for X.25.
 README.diversion
@@ -59,7 +48,3 @@ README.x25
 	- info for running X.25 over ISDN.
 syncPPP.FAQ
 	- frequently asked questions about running PPP over ISDN.
-README.hysdn
-	- info on driver for Hypercope active HYSDN cards
-README.mISDN
-	- info on the Modular ISDN subsystem (mISDN).
diff --git a/Documentation/ja_JP/SubmitChecklist b/Documentation/ja_JP/SubmitChecklist
index 6c42e071d72..2df4576f117 100644
--- a/Documentation/ja_JP/SubmitChecklist
+++ b/Documentation/ja_JP/SubmitChecklist
@@ -75,7 +75,7 @@ Linux カー�ルパッ�投稿者���ェックリスト
     ビルド��上�動作確�を行������。
 
 14: も�パッ��ディスク�I/O性能���影響を与�るよ���れ��
-    'CONFIG_LBD'オプションを有効���場��無効���場��両方�
+    'CONFIG_LBDAF'オプションを有効���場��無効���場��両方�
     テストを実施��������。
 
 15: lockdep�機能を全�有効���上��全��コードパスを評価������。
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 5578248c18a..92e1ab8178a 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -48,6 +48,7 @@ parameter is applicable:
 	EFI	EFI Partitioning (GPT) is enabled
 	EIDE	EIDE/ATAPI support is enabled.
 	FB	The frame buffer device is enabled.
+	GCOV	GCOV profiling is enabled.
 	HW	Appropriate hardware is enabled.
 	IA-64	IA-64 architecture is enabled.
 	IMA     Integrity measurement architecture is enabled.
@@ -796,6 +797,12 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format: off | on
 			default: on
 
+	gcov_persist=	[GCOV] When non-zero (default), profiling data for
+			kernel modules is saved and remains accessible via
+			debugfs, even when the module is unloaded/reloaded.
+			When zero, profiling data is discarded and associated
+			debugfs files are removed at module unload time.
+
 	gdth=		[HW,SCSI]
 			See header of drivers/scsi/gdth.c.
 
@@ -999,6 +1006,7 @@ and is between 256 and 4096 characters. It is defined in the file
 		nomerge
 		forcesac
 		soft
+		pt	[x86, IA64]
 
 	io7=		[HW] IO7 for Marvel based alpha systems
 			See comment before marvel_specify_io7 in
@@ -1362,6 +1370,27 @@ and is between 256 and 4096 characters. It is defined in the file
 	min_addr=nn[KMG]	[KNL,BOOT,ia64] All physical memory below this
 			physical address is ignored.
 
+	mini2440=	[ARM,HW,KNL]
+			Format:[0..2][b][c][t]
+			Default: "0tb"
+			MINI2440 configuration specification:
+			0 - The attached screen is the 3.5" TFT
+			1 - The attached screen is the 7" TFT
+			2 - The VGA Shield is attached (1024x768)
+			Leaving out the screen size parameter will not load
+			the TFT driver, and the framebuffer will be left
+			unconfigured.
+			b - Enable backlight. The TFT backlight pin will be
+			linked to the kernel VESA blanking code and a GPIO
+			LED. This parameter is not necessary when using the
+			VGA shield.
+			c - Enable the s3c camera interface.
+			t - Reserved for enabling touchscreen support. The
+			touchscreen support is not enabled in the mainstream
+			kernel as of 2.6.30, a preliminary port can be found
+			in the "bleeding edge" mini2440 support kernel at
+			http://repo.or.cz/w/linux-2.6/mini2440.git
+
 	mminit_loglevel=
 			[KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
 			parameter allows control of the logging verbosity for
@@ -1403,6 +1432,16 @@ and is between 256 and 4096 characters. It is defined in the file
 	mtdparts=	[MTD]
 			See drivers/mtd/cmdlinepart.c.
 
+	onenand.bdry=	[HW,MTD] Flex-OneNAND Boundary Configuration
+
+			Format: [die0_boundary][,die0_lock][,die1_boundary][,die1_lock]
+
+			boundary - index of last SLC block on Flex-OneNAND.
+				   The remaining blocks are configured as MLC blocks.
+			lock	 - Configure if Flex-OneNAND boundary should be locked.
+				   Once locked, the boundary cannot be changed.
+				   1 indicates lock status, 0 indicates unlock status.
+
 	mtdset=		[ARM]
 			ARM/S3C2412 JIVE boot control
 
@@ -1769,6 +1808,9 @@ and is between 256 and 4096 characters. It is defined in the file
 				root domains (aka PCI segments, in ACPI-speak).
 		nommconf	[X86] Disable use of MMCONFIG for PCI
 				Configuration
+		check_enable_amd_mmconf [X86] check for and enable
+				properly configured MMIO access to PCI
+				config space on AMD family 10h CPU
 		nomsi		[MSI] If the PCI_MSI kernel config parameter is
 				enabled, this kernel boot option can be used to
 				disable the use of MSI interrupts system-wide.
@@ -1821,7 +1863,7 @@ and is between 256 and 4096 characters. It is defined in the file
 				IRQ routing is enabled.
 		noacpi		[X86] Do not use ACPI for IRQ routing
 				or for PCI scanning.
-		use_crs		[X86] Use _CRS for PCI resource
+		nocrs		[X86] Don't use _CRS for PCI resource
 				allocation.
 		routeirq	Do IRQ routing for all PCI devices.
 				This is normally done in pci_enable_device(),
@@ -1858,6 +1900,12 @@ and is between 256 and 4096 characters. It is defined in the file
 				PAGE_SIZE is used as alignment.
 				PCI-PCI bridge can be specified, if resource
 				windows need to be expanded.
+		ecrc=		Enable/disable PCIe ECRC (transaction layer
+				end-to-end CRC checking).
+				bios: Use BIOS/firmware settings. This is the
+				the default.
+				off: Turn ECRC off
+				on: Turn ECRC on.
 
 	pcie_aspm=	[PCIE] Forcibly enable or disable PCIe Active State Power
 			Management.
diff --git a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
index 5093ddf900d..3ed3797b508 100644
--- a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
@@ -10,6 +10,8 @@ Required properties:
   - interrupts : should contain eSDHC interrupt.
   - interrupt-parent : interrupt source phandle.
   - clock-frequency : specifies eSDHC base clock frequency.
+  - sdhci,1-bit-only : (optional) specifies that a controller can
+    only handle 1-bit data transfers.
 
 Example:
 
diff --git a/Documentation/pps/pps.txt b/Documentation/pps/pps.txt
new file mode 100644
index 00000000000..125f4ab4899
--- /dev/null
+++ b/Documentation/pps/pps.txt
@@ -0,0 +1,172 @@
+
+			PPS - Pulse Per Second
+			----------------------
+
+(C) Copyright 2007 Rodolfo Giometti <giometti@enneenne.com>
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+
+
+Overview
+--------
+
+LinuxPPS provides a programming interface (API) to define in the
+system several PPS sources.
+
+PPS means "pulse per second" and a PPS source is just a device which
+provides a high precision signal each second so that an application
+can use it to adjust system clock time.
+
+A PPS source can be connected to a serial port (usually to the Data
+Carrier Detect pin) or to a parallel port (ACK-pin) or to a special
+CPU's GPIOs (this is the common case in embedded systems) but in each
+case when a new pulse arrives the system must apply to it a timestamp
+and record it for userland.
+
+Common use is the combination of the NTPD as userland program, with a
+GPS receiver as PPS source, to obtain a wallclock-time with
+sub-millisecond synchronisation to UTC.
+
+
+RFC considerations
+------------------
+
+While implementing a PPS API as RFC 2783 defines and using an embedded
+CPU GPIO-Pin as physical link to the signal, I encountered a deeper
+problem:
+
+   At startup it needs a file descriptor as argument for the function
+   time_pps_create().
+
+This implies that the source has a /dev/... entry. This assumption is
+ok for the serial and parallel port, where you can do something
+useful besides(!) the gathering of timestamps as it is the central
+task for a PPS-API. But this assumption does not work for a single
+purpose GPIO line. In this case even basic file-related functionality
+(like read() and write()) makes no sense at all and should not be a
+precondition for the use of a PPS-API.
+
+The problem can be simply solved if you consider that a PPS source is
+not always connected with a GPS data source.
+
+So your programs should check if the GPS data source (the serial port
+for instance) is a PPS source too, and if not they should provide the
+possibility to open another device as PPS source.
+
+In LinuxPPS the PPS sources are simply char devices usually mapped
+into files /dev/pps0, /dev/pps1, etc..
+
+
+Coding example
+--------------
+
+To register a PPS source into the kernel you should define a struct
+pps_source_info_s as follows:
+
+    static struct pps_source_info pps_ktimer_info = {
+	    .name         = "ktimer",
+	    .path         = "",
+	    .mode         = PPS_CAPTUREASSERT | PPS_OFFSETASSERT | \
+			    PPS_ECHOASSERT | \
+			    PPS_CANWAIT | PPS_TSFMT_TSPEC,
+	    .echo         = pps_ktimer_echo,
+	    .owner        = THIS_MODULE,
+    };
+
+and then calling the function pps_register_source() in your
+intialization routine as follows:
+
+    source = pps_register_source(&pps_ktimer_info,
+			PPS_CAPTUREASSERT | PPS_OFFSETASSERT);
+
+The pps_register_source() prototype is:
+
+  int pps_register_source(struct pps_source_info_s *info, int default_params)
+
+where "info" is a pointer to a structure that describes a particular
+PPS source, "default_params" tells the system what the initial default
+parameters for the device should be (it is obvious that these parameters
+must be a subset of ones defined in the struct
+pps_source_info_s which describe the capabilities of the driver).
+
+Once you have registered a new PPS source into the system you can
+signal an assert event (for example in the interrupt handler routine)
+just using:
+
+    pps_event(source, &ts, PPS_CAPTUREASSERT, ptr)
+
+where "ts" is the event's timestamp.
+
+The same function may also run the defined echo function
+(pps_ktimer_echo(), passing to it the "ptr" pointer) if the user
+asked for that... etc..
+
+Please see the file drivers/pps/clients/ktimer.c for example code.
+
+
+SYSFS support
+-------------
+
+If the SYSFS filesystem is enabled in the kernel it provides a new class:
+
+   $ ls /sys/class/pps/
+   pps0/  pps1/  pps2/
+
+Every directory is the ID of a PPS sources defined in the system and
+inside you find several files:
+
+   $ ls /sys/class/pps/pps0/
+   assert	clear  echo  mode  name  path  subsystem@  uevent
+
+Inside each "assert" and "clear" file you can find the timestamp and a
+sequence number:
+
+   $ cat /sys/class/pps/pps0/assert
+   1170026870.983207967#8
+
+Where before the "#" is the timestamp in seconds; after it is the
+sequence number. Other files are:
+
+* echo: reports if the PPS source has an echo function or not;
+
+* mode: reports available PPS functioning modes;
+
+* name: reports the PPS source's name;
+
+* path: reports the PPS source's device path, that is the device the
+  PPS source is connected to (if it exists).
+
+
+Testing the PPS support
+-----------------------
+
+In order to test the PPS support even without specific hardware you can use
+the ktimer driver (see the client subsection in the PPS configuration menu)
+and the userland tools provided into Documentaion/pps/ directory.
+
+Once you have enabled the compilation of ktimer just modprobe it (if
+not statically compiled):
+
+   # modprobe ktimer
+
+and the run ppstest as follow:
+
+   $ ./ppstest /dev/pps0
+   trying PPS source "/dev/pps1"
+   found PPS source "/dev/pps1"
+   ok, found 1 source(s), now start fetching data...
+   source 0 - assert 1186592699.388832443, sequence: 364 - clear  0.000000000, sequence: 0
+   source 0 - assert 1186592700.388931295, sequence: 365 - clear  0.000000000, sequence: 0
+   source 0 - assert 1186592701.389032765, sequence: 366 - clear  0.000000000, sequence: 0
+
+Please, note that to compile userland programs you need the file timepps.h
+(see Documentation/pps/).
diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt
index 1b74b5f30af..b4860509c31 100644
--- a/Documentation/rfkill.txt
+++ b/Documentation/rfkill.txt
@@ -3,9 +3,8 @@ rfkill - RF kill switch support
 
 1. Introduction
 2. Implementation details
-3. Kernel driver guidelines
-4. Kernel API
-5. Userspace support
+3. Kernel API
+4. Userspace support
 
 
 1. Introduction
@@ -19,82 +18,62 @@ disable all transmitters of a certain type (or all). This is intended for
 situations where transmitters need to be turned off, for example on
 aircraft.
 
+The rfkill subsystem has a concept of "hard" and "soft" block, which
+differ little in their meaning (block == transmitters off) but rather in
+whether they can be changed or not:
+ - hard block: read-only radio block that cannot be overriden by software
+ - soft block: writable radio block (need not be readable) that is set by
+               the system software.
 
 
 2. Implementation details
 
-The rfkill subsystem is composed of various components: the rfkill class, the
-rfkill-input module (an input layer handler), and some specific input layer
-events.
-
-The rfkill class is provided for kernel drivers to register their radio
-transmitter with the kernel, provide methods for turning it on and off and,
-optionally, letting the system know about hardware-disabled states that may
-be implemented on the device. This code is enabled with the CONFIG_RFKILL
-Kconfig option, which drivers can "select".
-
-The rfkill class code also notifies userspace of state changes, this is
-achieved via uevents. It also provides some sysfs files for userspace to
-check the status of radio transmitters. See the "Userspace support" section
-below.
+The rfkill subsystem is composed of three main components:
+ * the rfkill core,
+ * the deprecated rfkill-input module (an input layer handler, being
+   replaced by userspace policy code) and
+ * the rfkill drivers.
 
+The rfkill core provides API for kernel drivers to register their radio
+transmitter with the kernel, methods for turning it on and off and, letting
+the system know about hardware-disabled states that may be implemented on
+the device.
 
-The rfkill-input code implements a basic response to rfkill buttons -- it
-implements turning on/off all devices of a certain class (or all).
+The rfkill core code also notifies userspace of state changes, and provides
+ways for userspace to query the current states. See the "Userspace support"
+section below.
 
 When the device is hard-blocked (either by a call to rfkill_set_hw_state()
-or from query_hw_block) set_block() will be invoked but drivers can well
-ignore the method call since they can use the return value of the function
-rfkill_set_hw_state() to sync the software state instead of keeping track
-of calls to set_block().
-
-
-The entire functionality is spread over more than one subsystem:
-
- * The kernel input layer generates KEY_WWAN, KEY_WLAN etc. and
-   SW_RFKILL_ALL -- when the user presses a button. Drivers for radio
-   transmitters generally do not register to the input layer, unless the
-   device really provides an input device (i.e. a button that has no
-   effect other than generating a button press event)
-
- * The rfkill-input code hooks up to these events and switches the soft-block
-   of the various radio transmitters, depending on the button type.
-
- * The rfkill drivers turn off/on their transmitters as requested.
-
- * The rfkill class will generate userspace notifications (uevents) to tell
-   userspace what the current state is.
+or from query_hw_block) set_block() will be invoked for additional software
+block, but drivers can ignore the method call since they can use the return
+value of the function rfkill_set_hw_state() to sync the software state
+instead of keeping track of calls to set_block(). In fact, drivers should
+use the return value of rfkill_set_hw_state() unless the hardware actually
+keeps track of soft and hard block separately.
 
 
+3. Kernel API
 
-3. Kernel driver guidelines
 
-
-Drivers for radio transmitters normally implement only the rfkill class.
-These drivers may not unblock the transmitter based on own decisions, they
-should act on information provided by the rfkill class only.
+Drivers for radio transmitters normally implement an rfkill driver.
 
 Platform drivers might implement input devices if the rfkill button is just
 that, a button. If that button influences the hardware then you need to
-implement an rfkill class instead. This also applies if the platform provides
+implement an rfkill driver instead. This also applies if the platform provides
 a way to turn on/off the transmitter(s).
 
-During suspend/hibernation, transmitters should only be left enabled when
-wake-on wlan or similar functionality requires it and the device wasn't
-blocked before suspend/hibernate. Note that it may be necessary to update
-the rfkill subsystem's idea of what the current state is at resume time if
-the state may have changed over suspend.
-
+For some platforms, it is possible that the hardware state changes during
+suspend/hibernation, in which case it will be necessary to update the rfkill
+core with the current state is at resume time.
 
+To create an rfkill driver, driver's Kconfig needs to have
 
-4. Kernel API
+	depends on RFKILL || !RFKILL
 
-To build a driver with rfkill subsystem support, the driver should depend on
-(or select) the Kconfig symbol RFKILL.
-
-The hardware the driver talks to may be write-only (where the current state
-of the hardware is unknown), or read-write (where the hardware can be queried
-about its current state).
+to ensure the driver cannot be built-in when rfkill is modular. The !RFKILL
+case allows the driver to be built when rfkill is not configured, which which
+case all rfkill API can still be used but will be provided by static inlines
+which compile to almost nothing.
 
 Calling rfkill_set_hw_state() when a state change happens is required from
 rfkill drivers that control devices that can be hard-blocked unless they also
@@ -105,10 +84,35 @@ device). Don't do this unless you cannot get the event in any other way.
 
 5. Userspace support
 
-The following sysfs entries exist for every rfkill device:
+The recommended userspace interface to use is /dev/rfkill, which is a misc
+character device that allows userspace to obtain and set the state of rfkill
+devices and sets of devices. It also notifies userspace about device addition
+and removal. The API is a simple read/write API that is defined in
+linux/rfkill.h, with one ioctl that allows turning off the deprecated input
+handler in the kernel for the transition period.
+
+Except for the one ioctl, communication with the kernel is done via read()
+and write() of instances of 'struct rfkill_event'. In this structure, the
+soft and hard block are properly separated (unlike sysfs, see below) and
+userspace is able to get a consistent snapshot of all rfkill devices in the
+system. Also, it is possible to switch all rfkill drivers (or all drivers of
+a specified type) into a state which also updates the default state for
+hotplugged devices.
+
+After an application opens /dev/rfkill, it can read the current state of
+all devices, and afterwards can poll the descriptor for hotplug or state
+change events.
+
+Applications must ignore operations (the "op" field) they do not handle,
+this allows the API to be extended in the future.
+
+Additionally, each rfkill device is registered in sysfs and there has the
+following attributes:
 
 	name: Name assigned by driver to this key (interface or driver name).
-	type: Name of the key type ("wlan", "bluetooth", etc).
+	type: Driver type string ("wlan", "bluetooth", etc).
+	persistent: Whether the soft blocked state is initialised from
+	            non-volatile storage at startup.
 	state: Current state of the transmitter
 		0: RFKILL_STATE_SOFT_BLOCKED
 			transmitter is turned off by software
@@ -117,7 +121,12 @@ The following sysfs entries exist for every rfkill device:
 		2: RFKILL_STATE_HARD_BLOCKED
 			transmitter is forced off by something outside of
 			the driver's control.
-	claim: 0: Kernel handles events (currently always reads that value)
+	       This file is deprecated because it can only properly show
+	       three of the four possible states, soft-and-hard-blocked is
+	       missing.
+	claim: 0: Kernel handles events
+	       This file is deprecated because there no longer is a way to
+	       claim just control over a single rfkill instance.
 
 rfkill devices also issue uevents (with an action of "change"), with the
 following environment variables set:
@@ -128,9 +137,3 @@ RFKILL_TYPE
 
 The contents of these variables corresponds to the "name", "state" and
 "type" sysfs files explained above.
-
-An alternative userspace interface exists as a misc device /dev/rfkill,
-which allows userspace to obtain and set the state of rfkill devices and
-sets of devices. It also notifies userspace about device addition and
-removal. The API is a simple read/write API that is defined in
-linux/rfkill.h.
diff --git a/Documentation/robust-futex-ABI.txt b/Documentation/robust-futex-ABI.txt
index 535f69fab45..fd1cd8aae4e 100644
--- a/Documentation/robust-futex-ABI.txt
+++ b/Documentation/robust-futex-ABI.txt
@@ -135,7 +135,7 @@ manipulating this list), the user code must observe the following
 protocol on 'lock entry' insertion and removal:
 
 On insertion:
- 1) set the 'list_op_pending' word to the address of the 'lock word'
+ 1) set the 'list_op_pending' word to the address of the 'lock entry'
     to be inserted,
  2) acquire the futex lock,
  3) add the lock entry, with its thread id (TID) in the bottom 29 bits
@@ -143,7 +143,7 @@ On insertion:
  4) clear the 'list_op_pending' word.
 
 On removal:
- 1) set the 'list_op_pending' word to the address of the 'lock word'
+ 1) set the 'list_op_pending' word to the address of the 'lock entry'
     to be removed,
  2) remove the lock entry for this lock from the 'head' list,
  2) release the futex lock, and
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index de8e10a9410..0d8d23581c4 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -139,6 +139,7 @@ ALC883/888
   acer		Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc)
   acer-aspire	Acer Aspire 9810
   acer-aspire-4930g Acer Aspire 4930G
+  acer-aspire-6530g Acer Aspire 6530G
   acer-aspire-8930g Acer Aspire 8930G
   medion	Medion Laptops
   medion-md2	Medion MD2
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index 89093f53172..0736518b2f8 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -6,8 +6,8 @@
   5 -> Leadtek Winfast 2000XP Expert                       [107d:6611,107d:6613]
   6 -> AverTV Studio 303 (M126)                            [1461:000b]
   7 -> MSI TV-@nywhere Master                              [1462:8606]
-  8 -> Leadtek Winfast DV2000                              [107d:6620]
-  9 -> Leadtek PVR 2000                                    [107d:663b,107d:663c,107d:6632]
+  8 -> Leadtek Winfast DV2000                              [107d:6620,107d:6621]
+  9 -> Leadtek PVR 2000                                    [107d:663b,107d:663c,107d:6632,107d:6630,107d:6638,107d:6631,107d:6637,107d:663d]
  10 -> IODATA GV-VCP3/PCI                                  [10fc:d003]
  11 -> Prolink PlayTV PVR
  12 -> ASUS PVR-416                                        [1043:4823,1461:c111]
@@ -59,7 +59,7 @@
  58 -> Pinnacle PCTV HD 800i                               [11bd:0051]
  59 -> DViCO FusionHDTV 5 PCI nano                         [18ac:d530]
  60 -> Pinnacle Hybrid PCTV                                [12ab:1788]
- 61 -> Winfast TV2000 XP Global                            [107d:6f18]
+ 61 -> Leadtek TV2000 XP Global                            [107d:6f18,107d:6618]
  62 -> PowerColor RA330                                    [14f1:ea3d]
  63 -> Geniatech X8000-MT DVBT                             [14f1:8852]
  64 -> DViCO FusionHDTV DVB-T PRO                          [18ac:db30]
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index a98a688c11b..873630e7e53 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -65,3 +65,4 @@
  67 -> Terratec Grabby                          (em2860)        [0ccd:0096]
  68 -> Terratec AV350                           (em2860)        [0ccd:0084]
  69 -> KWorld ATSC 315U HDTV TV Box             (em2882)        [eb1a:a313]
+ 70 -> Evga inDtube                             (em2882)
diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt
index d54c1e4c6a9..ba4706afc5f 100644
--- a/Documentation/video4linux/v4l2-framework.txt
+++ b/Documentation/video4linux/v4l2-framework.txt
@@ -390,6 +390,30 @@ later date. It differs between i2c drivers and as such can be confusing.
 To see which chip variants are supported you can look in the i2c driver code
 for the i2c_device_id table. This lists all the possibilities.
 
+There are two more helper functions:
+
+v4l2_i2c_new_subdev_cfg: this function adds new irq and platform_data
+arguments and has both 'addr' and 'probed_addrs' arguments: if addr is not
+0 then that will be used (non-probing variant), otherwise the probed_addrs
+are probed.
+
+For example: this will probe for address 0x10:
+
+struct v4l2_subdev *sd = v4l2_i2c_new_subdev_cfg(v4l2_dev, adapter,
+	       "module_foo", "chipid", 0, NULL, 0, I2C_ADDRS(0x10));
+
+v4l2_i2c_new_subdev_board uses an i2c_board_info struct which is passed
+to the i2c driver and replaces the irq, platform_data and addr arguments.
+
+If the subdev supports the s_config core ops, then that op is called with
+the irq and platform_data arguments after the subdev was setup. The older
+v4l2_i2c_new_(probed_)subdev functions will call s_config as well, but with
+irq set to 0 and platform_data set to NULL.
+
+Note that in the next kernel release the functions v4l2_i2c_new_subdev,
+v4l2_i2c_new_probed_subdev and v4l2_i2c_new_probed_subdev_addr will all be
+replaced by a single v4l2_i2c_new_subdev that is identical to
+v4l2_i2c_new_subdev_cfg but without the irq and platform_data arguments.
 
 struct video_device
 -------------------
diff --git a/Documentation/watchdog/hpwdt.txt b/Documentation/watchdog/hpwdt.txt
new file mode 100644
index 00000000000..9c24d5ffbb0
--- /dev/null
+++ b/Documentation/watchdog/hpwdt.txt
@@ -0,0 +1,95 @@
+Last reviewed: 06/02/2009
+
+                     HP iLO2 NMI Watchdog Driver
+              NMI sourcing for iLO2 based ProLiant Servers
+                     Documentation and Driver by
+              Thomas Mingarelli <thomas.mingarelli@hp.com>
+
+ The HP iLO2 NMI Watchdog driver is a kernel module that provides basic
+ watchdog functionality and the added benefit of NMI sourcing. Both the
+ watchdog functionality and the NMI sourcing capability need to be enabled
+ by the user. Remember that the two modes are not dependant on one another.
+ A user can have the NMI sourcing without the watchdog timer and vice-versa.
+
+ Watchdog functionality is enabled like any other common watchdog driver. That
+ is, an application needs to be started that kicks off the watchdog timer. A
+ basic application exists in the Documentation/watchdog/src directory called
+ watchdog-test.c. Simply compile the C file and kick it off. If the system
+ gets into a bad state and hangs, the HP ProLiant iLO 2 timer register will
+ not be updated in a timely fashion and a hardware system reset (also known as
+ an Automatic Server Recovery (ASR)) event will occur.
+
+ The hpwdt driver also has four (4) module parameters. They are the following:
+
+ soft_margin - allows the user to set the watchdog timer value
+ allow_kdump - allows the user to save off a kernel dump image after an NMI
+ nowayout    - basic watchdog parameter that does not allow the timer to
+               be restarted or an impending ASR to be escaped.
+ priority    - determines whether or not the hpwdt driver is first on the
+               die_notify list to handle NMIs or last. The default value
+               for this module parameter is 0 or LAST. If the user wants to
+               enable NMI sourcing then reload the hpwdt driver with
+               priority=1 (and boot with nmi_watchdog=0).
+
+ NOTE: More information about watchdog drivers in general, including the ioctl
+       interface to /dev/watchdog can be found in
+       Documentation/watchdog/watchdog-api.txt and Documentation/IPMI.txt.
+
+ The priority parameter was introduced due to other kernel software that relied
+ on handling NMIs (like oprofile). Keeping hpwdt's priority at 0 (or LAST)
+ enables the users of NMIs for non critical events to be work as expected.
+
+ The NMI sourcing capability is disabled by default due to the inability to
+ distinguish between "NMI Watchdog Ticks" and "HW generated NMI events" in the
+ Linux kernel. What this means is that the hpwdt nmi handler code is called
+ each time the NMI signal fires off. This could amount to several thousands of
+ NMIs in a matter of seconds. If a user sees the Linux kernel's "dazed and
+ confused" message in the logs or if the system gets into a hung state, then
+ the hpwdt driver can be reloaded with the "priority" module parameter set
+ (priority=1).
+
+ 1. If the kernel has not been booted with nmi_watchdog turned off then
+    edit /boot/grub/menu.lst and place the nmi_watchdog=0 at the end of the
+    currently booting kernel line.
+ 2. reboot the sever
+ 3. Once the system comes up perform a rmmod hpwdt
+ 4. insmod /lib/modules/`uname -r`/kernel/drivers/char/watchdog/hpwdt.ko priority=1
+
+ Now, the hpwdt can successfully receive and source the NMI and provide a log
+ message that details the reason for the NMI (as determined by the HP BIOS).
+
+ Below is a list of NMIs the HP BIOS understands along with the associated
+ code (reason):
+
+	No source found                00h
+
+	Uncorrectable Memory Error     01h
+
+	ASR NMI                        1Bh
+
+	PCI Parity Error               20h
+
+	NMI Button Press               27h
+
+	SB_BUS_NMI                     28h
+
+	ILO Doorbell NMI               29h
+
+	ILO IOP NMI                    2Ah
+
+	ILO Watchdog NMI               2Bh
+
+	Proc Throt NMI                 2Ch
+
+	Front Side Bus NMI             2Dh
+
+	PCI Express Error              2Fh
+
+	DMA controller NMI             30h
+
+	Hypertransport/CSI Error       31h
+
+
+
+ -- Tom Mingarelli
+    (thomas.mingarelli@hp.com)
diff --git a/MAINTAINERS b/MAINTAINERS
index fb94addb34d..303129ab4b7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -653,6 +653,8 @@ M:	laforge@openezx.org
 L:	openezx-devel@lists.openezx.org (subscribers-only)
 W:	http://www.openezx.org/
 S:	Maintained
+T:	topgit git://git.openezx.org/openezx.git
+F:	arch/arm/mach-pxa/ezx.c
 
 ARM/FARADAY FA526 PORT
 P:	Paulius Zaleckas
@@ -774,11 +776,25 @@ P:	Philipp Zabel
 M:	philipp.zabel@gmail.com
 S:	Maintained
 
+ARM/MIOA701 MACHINE SUPPORT
+P:	Robert Jarzmik
+M:	robert.jarzmik@free.fr
+L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+F:	arch/arm/mach-pxa/mioa701.c
+S:	Maintained
+
 ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
 P:	Michael Petchkovsky
 M:	mkpetch@internode.on.net
 S:	Maintained
 
+ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
+P:	Nelson Castillo
+M:	arhuaco@freaks-unidos.net
+L:	openmoko-kernel@lists.openmoko.org (subscribers-only)
+W:	http://wiki.openmoko.org/wiki/Neo_FreeRunner
+S:	Supported
+
 ARM/TOSA MACHINE SUPPORT
 P:	Dmitry Eremin-Solenikov
 M:	dbaryshkov@gmail.com
@@ -792,6 +808,12 @@ M:	marek.vasut@gmail.com
 W:	http://hackndev.com
 S:	Maintained
 
+ARM/PALM TREO 680 SUPPORT
+P:	Tomas Cech
+M:	sleep_walker@suse.cz
+W:	http://hackndev.com
+S:	Maintained
+
 ARM/PALMZ72 SUPPORT
 P:	Sergey Lapin
 M:	slapin@ossfans.org
@@ -946,7 +968,7 @@ M:	me@bobcopeland.com
 L:	linux-wireless@vger.kernel.org
 L:	ath5k-devel@lists.ath5k.org
 S:	Maintained
-F:	drivers/net/wireless/ath5k/
+F:	drivers/net/wireless/ath/ath5k/
 
 ATHEROS ATH9K WIRELESS DRIVER
 P:	Luis R. Rodriguez
@@ -962,7 +984,7 @@ M:	senthilkumar@atheros.com
 L:	linux-wireless@vger.kernel.org
 L:	ath9k-devel@lists.ath9k.org
 S:	Supported
-F:	drivers/net/wireless/ath9k/
+F:	drivers/net/wireless/ath/ath9k/
 
 ATHEROS AR9170 WIRELESS DRIVER
 P:	Christian Lamparter
@@ -970,7 +992,7 @@ M:	chunkeey@web.de
 L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org/en/users/Drivers/ar9170
 S:	Maintained
-F:	drivers/net/wireless/ar9170/
+F:	drivers/net/wireless/ath/ar9170/
 
 ATI_REMOTE2 DRIVER
 P:	Ville Syrjala
@@ -1010,6 +1032,13 @@ W:	http://www.at91.com/
 S:	Maintained
 F:	drivers/mmc/host/at91_mci.c
 
+ATMEL AT91 / AT32 MCI DRIVER
+P:	Nicolas Ferre
+M:	nicolas.ferre@atmel.com
+S:	Maintained
+F:	drivers/mmc/host/atmel-mci.c
+F:	drivers/mmc/host/atmel-mci-regs.h
+
 ATMEL AT91 / AT32 SERIAL DRIVER
 P:	Haavard Skinnemoen
 M:	hskinnemoen@atmel.com
@@ -1544,6 +1573,7 @@ L:	containers@lists.linux-foundation.org
 S:	Maintained
 F:	include/linux/cgroup*
 F:	kernel/cgroup*
+F:	mm/*cgroup*
 
 CORETEMP HARDWARE MONITORING DRIVER
 P:	Rudolf Marek
@@ -2052,8 +2082,8 @@ F:	drivers/edac/i5400_edac.c
 
 EDAC-I82975X
 P:	Ranganathan Desikan
-P:	Arvind R.
 M:	rdesikan@jetzbroadband.com
+P:	Arvind R.
 M:	arvind@acarlab.com
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
@@ -2274,11 +2304,9 @@ F:	drivers/net/wan/dlci.c
 F:	drivers/net/wan/sdla.c
 
 FRAMEBUFFER LAYER
-P:	Antonino Daplas
-M:	adaplas@gmail.com
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	http://linux-fbdev.sourceforge.net/
-S:	Maintained
+S:	Orphan
 F:	Documentation/fb/
 F:	drivers/video/fb*
 F:	include/linux/fb.h
@@ -2391,7 +2419,7 @@ FTRACE
 P:	Steven Rostedt
 M:	rostedt@goodmis.org
 S:	Maintained
-F:	Documentation/ftrace.txt
+F:	Documentation/trace/ftrace.txt
 F:	arch/*/*/*/ftrace.h
 F:	arch/*/kernel/ftrace.c
 F:	include/*/ftrace.h
@@ -2454,6 +2482,14 @@ F:	drivers/net/wan/pc300too.c
 F:	drivers/net/wan/pci200syn.c
 F:	drivers/net/wan/wanxl*
 
+GENERIC INCLUDE/ASM HEADER FILES
+P:	Arnd Bergmann
+M:	arnd@arndb.de
+L:	linux-arch@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git
+S:	Maintained
+F:	include/asm-generic
+
 GFS2 FILE SYSTEM
 P:	Steven Whitehouse
 M:	swhiteho@redhat.com
@@ -2796,10 +2832,10 @@ S:	Supported
 F:	drivers/scsi/ips.*
 
 IDE SUBSYSTEM
-P:	Bartlomiej Zolnierkiewicz
-M:	bzolnier@gmail.com
+P:	David S. Miller
+M:	davem@davemloft.net
 L:	linux-ide@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6.git
 S:	Maintained
 F:	Documentation/ide/
 F:	drivers/ide/
@@ -2847,10 +2883,10 @@ P:	Sergey Lapin
 M:	slapin@ossfans.org
 L:	linux-zigbee-devel@lists.sourceforge.net
 W:	http://apps.sourceforge.net/trac/linux-zigbee
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lumag/lowpan.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git
 S:	Maintained
 F:	net/ieee802154/
-F:	drivers/ieee801254/
+F:	drivers/ieee802154/
 
 INTEGRITY MEASUREMENT ARCHITECTURE (IMA)
 P:	Mimi Zohar
@@ -3224,7 +3260,6 @@ W:	http://www.linux-mtd.infradead.org/doc/jffs2.html
 S:	Maintained
 F:	fs/jffs2/
 F:	include/linux/jffs2.h
-F:	include/mtd/jffs2-user.h
 
 JOURNALLING LAYER FOR BLOCK DEVICES (JBD)
 P:	Stephen Tweedie
@@ -3407,7 +3442,7 @@ P:	Eduard - Gabriel Munteanu
 M:	eduard.munteanu@linux360.ro
 S:	Maintained
 F:	Documentation/trace/kmemtrace.txt
-F:	include/trace/kmemtrace.h
+F:	include/linux/kmemtrace.h
 F:	kernel/trace/kmemtrace.c
 
 KPROBES
@@ -4084,7 +4119,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
 S:	Maintained
 F:	net/wireless/
 F:	include/net/ieee80211*
-F:	include/net/wireless.h
+F:	include/linux/wireless.h
 
 NETWORKING DRIVERS
 L:	netdev@vger.kernel.org
@@ -4578,6 +4613,13 @@ S:	Maintained
 F:	drivers/net/pppol2tp.c
 F:	include/linux/if_pppol2tp.h
 
+PPS SUPPORT
+P:	Rodolfo Giometti
+M:	giometti@enneenne.com
+W:	http://wiki.enneenne.com/index.php/LinuxPPS_support
+L:	linuxpps@ml.enneenne.com (subscribers-only)
+S:	Maintained
+
 PREEMPTIBLE KERNEL
 P:	Robert Love
 M:	rml@tech9.net
@@ -5088,6 +5130,13 @@ L:	sdhci-devel@lists.ossman.eu
 S:	Maintained
 F:	drivers/mmc/host/sdhci.*
 
+SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER
+P:	Ben Dooks
+M:	ben-linux@fluff.org
+L:	sdhci-devel@lists.ossman.eu
+S:	Maintained
+F:	drivers/mmc/host/sdhci-s3c.c
+
 SECURITY SUBSYSTEM
 P:	James Morris
 M:	jmorris@namei.org
@@ -5473,6 +5522,7 @@ STAGING SUBSYSTEM
 P:	Greg Kroah-Hartman
 M:	gregkh@suse.de
 T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+L:	devel@driverdev.osuosl.org
 S:	Maintained
 F:	drivers/staging/
 
@@ -6209,6 +6259,14 @@ S:	Maintained
 F:	Documentation/i2c/busses/i2c-viapro
 F:	drivers/i2c/busses/i2c-viapro.c
 
+VIA SD/MMC CARD CONTROLLER DRIVER
+P:	Joseph Chan
+M:	JosephChan@via.com.tw
+P:	Harald Welte
+M:	HaraldWelte@viatech.com
+S:	Maintained
+F:	drivers/mmc/host/via-sdmmc.c
+
 VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER
 P:	Joseph Chan
 M:	JosephChan@via.com.tw
diff --git a/Makefile b/Makefile
index ea63667617f..46e1c9d03d5 100644
--- a/Makefile
+++ b/Makefile
@@ -330,6 +330,7 @@ AFLAGS_MODULE   = $(MODFLAGS)
 LDFLAGS_MODULE  =
 CFLAGS_KERNEL	=
 AFLAGS_KERNEL	=
+CFLAGS_GCOV	= -fprofile-arcs -ftest-coverage
 
 
 # Use LINUXINCLUDE when you must reference the include/ directory.
@@ -356,7 +357,7 @@ export CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE
 export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
 
 export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
-export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
+export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV
 export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
 
 # When compiling out-of-tree modules, put MODVERDIR in the module
@@ -1216,8 +1217,8 @@ clean: archclean $(clean-dirs)
 		\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
 		-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
 		-o -name '*.symtypes' -o -name 'modules.order' \
-		-o -name 'Module.markers' -o -name '.tmp_*.o.*' \) \
-		-type f -print | xargs rm -f
+		-o -name 'Module.markers' -o -name '.tmp_*.o.*' \
+		-o -name '*.gcno' \) -type f -print | xargs rm -f
 
 # mrproper - Delete all generated files, including .config
 #
@@ -1421,8 +1422,8 @@ clean: $(clean-dirs)
 	$(call cmd,rmfiles)
 	@find $(KBUILD_EXTMOD) $(RCS_FIND_IGNORE) \
 		\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
-		-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \
-		-type f -print | xargs rm -f
+		-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
+		-o -name '*.gcno' \) -type f -print | xargs rm -f
 
 help:
 	@echo  '  Building external modules.'
diff --git a/arch/Kconfig b/arch/Kconfig
index 78a35e9dc10..99193b16023 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -112,3 +112,5 @@ config HAVE_DMA_API_DEBUG
 
 config HAVE_DEFAULT_NO_SPIN_MUTEXES
 	bool
+
+source "kernel/gcov/Kconfig"
diff --git a/arch/alpha/include/asm/pci.h b/arch/alpha/include/asm/pci.h
index cb04eaa6ba3..d22ace99d13 100644
--- a/arch/alpha/include/asm/pci.h
+++ b/arch/alpha/include/asm/pci.h
@@ -237,19 +237,6 @@ extern void pcibios_resource_to_bus(struct pci_dev *, struct pci_bus_region *,
 extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
 				    struct pci_bus_region *region);
 
-static inline struct resource *
-pcibios_select_root(struct pci_dev *pdev, struct resource *res)
-{
-	struct resource *root = NULL;
-
-	if (res->flags & IORESOURCE_IO)
-		root = &ioport_resource;
-	if (res->flags & IORESOURCE_MEM)
-		root = &iomem_resource;
-
-	return root;
-}
-
 #define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
 
 static inline int pci_proc_domain(struct pci_bus *bus)
diff --git a/arch/alpha/mm/fault.c b/arch/alpha/mm/fault.c
index 4829f96585b..00a31deaa96 100644
--- a/arch/alpha/mm/fault.c
+++ b/arch/alpha/mm/fault.c
@@ -146,7 +146,7 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 	/* If for any reason at all we couldn't handle the fault,
 	   make sure we exit gracefully rather than endlessly redo
 	   the fault.  */
-	fault = handle_mm_fault(mm, vma, address, cause > 0);
+	fault = handle_mm_fault(mm, vma, address, cause > 0 ? FAULT_FLAG_WRITE : 0);
 	up_read(&mm->mmap_sem);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 29475101a7b..aef63c8e3d2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1241,7 +1241,7 @@ endmenu
 
 menu "CPU Power Management"
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA)
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA || ARCH_S3C64XX)
 
 source "drivers/cpufreq/Kconfig"
 
@@ -1272,6 +1272,10 @@ config CPU_FREQ_PXA
 	default y
 	select CPU_FREQ_DEFAULT_GOV_USERSPACE
 
+config CPU_FREQ_S3C64XX
+	bool "CPUfreq support for Samsung S3C64XX CPUs"
+	depends on CPU_FREQ && CPU_S3C6410
+
 endif
 
 source "drivers/cpuidle/Kconfig"
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 01d49be3b2c..4515728c534 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -674,6 +674,15 @@ proc_types:
 		b	__armv4_mmu_cache_off
 		b	__armv5tej_mmu_cache_flush
 
+#ifdef CONFIG_CPU_FEROCEON_OLD_ID
+		/* this conflicts with the standard ARMv5TE entry */
+		.long	0x41009260		@ Old Feroceon
+		.long	0xff00fff0
+		b	__armv4_mmu_cache_on
+		b	__armv4_mmu_cache_off
+		b	__armv5tej_mmu_cache_flush
+#endif
+
 		.word	0x66015261		@ FA526
 		.word	0xff01fff1
 		b	__fa526_cache_on
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 664c7b8b1ba..337741f734a 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -117,7 +117,7 @@ static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
 	u32 val;
 
 	spin_lock(&irq_controller_lock);
-	irq_desc[irq].cpu = cpu;
+	irq_desc[irq].node = cpu;
 	val = readl(reg) & ~(0xff << shift);
 	val |= 1 << (cpu + shift);
 	writel(val, reg);
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 887c6eb3a18..6ed89836e90 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -229,14 +229,18 @@ static int vic_set_wake(unsigned int irq, unsigned int on)
 {
 	struct vic_device *v = vic_from_irq(irq);
 	unsigned int off = irq & 31;
+	u32 bit = 1 << off;
 
 	if (!v)
 		return -EINVAL;
 
+	if (!(bit & v->resume_sources))
+		return -EINVAL;
+
 	if (on)
-		v->resume_irqs |= 1 << off;
+		v->resume_irqs |= bit;
 	else
-		v->resume_irqs &= ~(1 << off);
+		v->resume_irqs &= ~bit;
 
 	return 0;
 }
diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
new file mode 100644
index 00000000000..e49ed40f3be
--- /dev/null
+++ b/arch/arm/configs/mini2440_defconfig
@@ -0,0 +1,2097 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc6
+# Wed May 20 12:29:51 2009
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_MMU=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_BLK_DEV_INTEGRITY=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+CONFIG_ARCH_S3C2410=y
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_PLAT_S3C24XX=y
+CONFIG_S3C2410_CLOCK=y
+CONFIG_CPU_S3C244X=y
+CONFIG_S3C24XX_PWM=y
+CONFIG_S3C24XX_GPIO_EXTRA=0
+CONFIG_S3C2410_DMA=y
+# CONFIG_S3C2410_DMA_DEBUG is not set
+CONFIG_S3C24XX_ADC=y
+CONFIG_PLAT_S3C=y
+CONFIG_CPU_LLSERIAL_S3C2440_ONLY=y
+CONFIG_CPU_LLSERIAL_S3C2440=y
+
+#
+# Boot options
+#
+# CONFIG_S3C_BOOT_WATCHDOG is not set
+# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+
+#
+# Power management
+#
+# CONFIG_S3C2410_PM_DEBUG is not set
+# CONFIG_S3C2410_PM_CHECK is not set
+CONFIG_S3C_LOWLEVEL_UART_PORT=0
+CONFIG_S3C_GPIO_SPACE=0
+
+#
+# S3C2400 Machines
+#
+CONFIG_S3C2410_PM=y
+CONFIG_S3C2410_GPIO=y
+
+#
+# S3C2410 Machines
+#
+# CONFIG_ARCH_SMDK2410 is not set
+# CONFIG_ARCH_H1940 is not set
+# CONFIG_MACH_N30 is not set
+# CONFIG_ARCH_BAST is not set
+# CONFIG_MACH_OTOM is not set
+# CONFIG_MACH_AML_M5900 is not set
+# CONFIG_MACH_TCT_HAMMER is not set
+# CONFIG_MACH_VR1000 is not set
+# CONFIG_MACH_QT2410 is not set
+
+#
+# S3C2412 Machines
+#
+# CONFIG_MACH_JIVE is not set
+# CONFIG_MACH_SMDK2413 is not set
+# CONFIG_MACH_SMDK2412 is not set
+# CONFIG_MACH_VSTMS is not set
+CONFIG_CPU_S3C2440=y
+CONFIG_S3C2440_DMA=y
+
+#
+# S3C2440 Machines
+#
+# CONFIG_MACH_ANUBIS is not set
+# CONFIG_MACH_OSIRIS is not set
+# CONFIG_MACH_RX3715 is not set
+# CONFIG_ARCH_S3C2440 is not set
+# CONFIG_MACH_NEXCODER_2440 is not set
+# CONFIG_MACH_AT2440EVB is not set
+CONFIG_MACH_MINI2440=y
+
+#
+# S3C2442 Machines
+#
+
+#
+# S3C2443 Machines
+#
+# CONFIG_MACH_SMDK2443 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=200
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=m
+CONFIG_CFG80211_REG_DEBUG=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_FTL=y
+CONFIG_NFTL=y
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=y
+CONFIG_RFD_FTL=y
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_S3C2410=y
+# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
+# CONFIG_MTD_NAND_S3C2410_HWECC is not set
+# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+CONFIG_MTD_LPDDR=y
+CONFIG_MTD_QINFO_PROBE=y
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_AR9170_USB is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+CONFIG_ZD1211RW=m
+CONFIG_ZD1211RW_DEBUG=y
+# CONFIG_RT2X00 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=3
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_S3C2440=y
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=128
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_S3C2410=y
+CONFIG_I2C_SIMTEC=y
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+CONFIG_SENSORS_TSL2550=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_S3C24XX=y
+# CONFIG_SPI_S3C24XX_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IBMAEM is not set
+# CONFIG_SENSORS_IBMPEX is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+CONFIG_SENSORS_LM75=y
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_THERMAL=m
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_S3C2410_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_AU0828 is not set
+CONFIG_SOC_CAMERA=m
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+# CONFIG_SOC_CAMERA_MT9M111 is not set
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+CONFIG_SOC_CAMERA_PLATFORM=m
+# CONFIG_SOC_CAMERA_OV772X is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+CONFIG_USB_GSPCA_ZC3XX=m
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_CX231XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+# CONFIG_USB_PWC_INPUT_EVDEV is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Supported USB Adapters
+#
+# CONFIG_DVB_USB is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_S3C2410=y
+# CONFIG_FB_S3C2410_DEBUG is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_SOC=y
+CONFIG_SND_S3C24XX_SOC=y
+CONFIG_SND_S3C24XX_SOC_I2S=y
+# CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650 is not set
+CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_L3=y
+CONFIG_SND_SOC_UDA134X=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+# CONFIG_USB_PRINTER is not set
+CONFIG_USB_WDM=m
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=m
+# CONFIG_USB_STORAGE_FREECOM is not set
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+# CONFIG_USB_EZUSB is not set
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+CONFIG_USB_SERIAL_CP210X=m
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+CONFIG_USB_SERIAL_SPCP8X5=m
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+CONFIG_USB_GADGET_S3C2410=y
+CONFIG_USB_S3C2410=y
+# CONFIG_USB_S3C2410_DEBUG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SPI=y
+CONFIG_MMC_S3C=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_S3C24XX=y
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_PWM is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_S3C=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+CONFIG_ROMFS_BACKED_BY_BOTH=y
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_ROMFS_ON_MTD=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_LDM_PARTITION=y
+# CONFIG_LDM_DEBUG is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+CONFIG_DEBUG_S3C_UART=0
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_SECURITY_FILE_CAPABILITIES=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_FIPS=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h
index 918d0cbbf06..0abf386ba3d 100644
--- a/arch/arm/include/asm/pci.h
+++ b/arch/arm/include/asm/pci.h
@@ -65,19 +65,6 @@ extern void
 pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
 			struct pci_bus_region *region);
 
-static inline struct resource *
-pcibios_select_root(struct pci_dev *pdev, struct resource *res)
-{
-	struct resource *root = NULL;
-
-	if (res->flags & IORESOURCE_IO)
-		root = &ioport_resource;
-	if (res->flags & IORESOURCE_MEM)
-		root = &iomem_resource;
-
-	return root;
-}
-
 /*
  * Dummy implementation; always return 0.
  */
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 94cc58ef61a..0e97b8cb77d 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -389,6 +389,8 @@
 #define __NR_inotify_init1		(__NR_SYSCALL_BASE+360)
 #define __NR_preadv			(__NR_SYSCALL_BASE+361)
 #define __NR_pwritev			(__NR_SYSCALL_BASE+362)
+#define __NR_rt_tgsigqueueinfo		(__NR_SYSCALL_BASE+363)
+#define __NR_perf_counter_open		(__NR_SYSCALL_BASE+364)
 
 /*
  * The following SWIs are ARM private.
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 1680e9e9c83..f776e72a4cb 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -372,6 +372,8 @@
 /* 360 */	CALL(sys_inotify_init1)
 		CALL(sys_preadv)
 		CALL(sys_pwritev)
+		CALL(sys_rt_tgsigqueueinfo)
+		CALL(sys_perf_counter_open)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 6874c7dca75..096f600dc8d 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -167,7 +167,7 @@ void __init init_IRQ(void)
 
 #ifdef CONFIG_SMP
 	cpumask_setall(bad_irq_desc.affinity);
-	bad_irq_desc.cpu = smp_processor_id();
+	bad_irq_desc.node = smp_processor_id();
 #endif
 	init_arch_irq();
 }
@@ -176,7 +176,7 @@ void __init init_IRQ(void)
 
 static void route_irq(struct irq_desc *desc, unsigned int irq, unsigned int cpu)
 {
-	pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", irq, desc->cpu, cpu);
+	pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", irq, desc->node, cpu);
 
 	spin_lock_irq(&desc->lock);
 	desc->chip->set_affinity(irq, cpumask_of(cpu));
@@ -195,7 +195,7 @@ void migrate_irqs(void)
 	for (i = 0; i < NR_IRQS; i++) {
 		struct irq_desc *desc = irq_desc + i;
 
-		if (desc->cpu == cpu) {
+		if (desc->node == cpu) {
 			unsigned int newcpu = cpumask_any_and(desc->affinity,
 							      cpu_online_mask);
 			if (newcpu >= nr_cpu_ids) {
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 1585423699e..39196dff478 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -114,9 +114,6 @@ void arm_machine_restart(char mode, const char *cmd)
 /*
  * Function pointers to optional machine specific functions
  */
-void (*pm_idle)(void);
-EXPORT_SYMBOL(pm_idle);
-
 void (*pm_power_off)(void);
 EXPORT_SYMBOL(pm_power_off);
 
@@ -130,20 +127,19 @@ EXPORT_SYMBOL_GPL(arm_pm_restart);
  */
 static void default_idle(void)
 {
-	if (hlt_counter)
-		cpu_relax();
-	else {
-		local_irq_disable();
-		if (!need_resched())
-			arch_idle();
-		local_irq_enable();
-	}
+	if (!need_resched())
+		arch_idle();
+	local_irq_enable();
 }
 
+void (*pm_idle)(void) = default_idle;
+EXPORT_SYMBOL(pm_idle);
+
 /*
- * The idle thread.  We try to conserve power, while trying to keep
- * overall latency low.  The architecture specific idle is passed
- * a value to indicate the level of "idleness" of the system.
+ * The idle thread, has rather strange semantics for calling pm_idle,
+ * but this is what x86 does and we need to do the same, so that
+ * things like cpuidle get called in the same way.  The only difference
+ * is that we always respect 'hlt_counter' to prevent low power idle.
  */
 void cpu_idle(void)
 {
@@ -151,21 +147,31 @@ void cpu_idle(void)
 
 	/* endless idle loop with no priority at all */
 	while (1) {
-		void (*idle)(void) = pm_idle;
-
+		tick_nohz_stop_sched_tick(1);
+		leds_event(led_idle_start);
+		while (!need_resched()) {
 #ifdef CONFIG_HOTPLUG_CPU
-		if (cpu_is_offline(smp_processor_id())) {
-			leds_event(led_idle_start);
-			cpu_die();
-		}
+			if (cpu_is_offline(smp_processor_id()))
+				cpu_die();
 #endif
 
-		if (!idle)
-			idle = default_idle;
-		leds_event(led_idle_start);
-		tick_nohz_stop_sched_tick(1);
-		while (!need_resched())
-			idle();
+			local_irq_disable();
+			if (hlt_counter) {
+				local_irq_enable();
+				cpu_relax();
+			} else {
+				stop_critical_timings();
+				pm_idle();
+				start_critical_timings();
+				/*
+				 * This will eventually be removed - pm_idle
+				 * functions should always return with IRQs
+				 * enabled.
+				 */
+				WARN_ON(irqs_disabled());
+				local_irq_enable();
+			}
+		}
 		leds_event(led_idle_end);
 		tick_nohz_restart_sched_tick();
 		preempt_enable_no_resched();
@@ -352,6 +358,23 @@ asm(	".section .text\n"
 "	.size	kernel_thread_helper, . - kernel_thread_helper\n"
 "	.previous");
 
+#ifdef CONFIG_ARM_UNWIND
+extern void kernel_thread_exit(long code);
+asm(	".section .text\n"
+"	.align\n"
+"	.type	kernel_thread_exit, #function\n"
+"kernel_thread_exit:\n"
+"	.fnstart\n"
+"	.cantunwind\n"
+"	bl	do_exit\n"
+"	nop\n"
+"	.fnend\n"
+"	.size	kernel_thread_exit, . - kernel_thread_exit\n"
+"	.previous");
+#else
+#define kernel_thread_exit	do_exit
+#endif
+
 /*
  * Create a kernel thread.
  */
@@ -363,7 +386,7 @@ pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 
 	regs.ARM_r1 = (unsigned long)arg;
 	regs.ARM_r2 = (unsigned long)fn;
-	regs.ARM_r3 = (unsigned long)do_exit;
+	regs.ARM_r3 = (unsigned long)kernel_thread_exit;
 	regs.ARM_pc = (unsigned long)kernel_thread_helper;
 	regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE;
 
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index 1dedc2c7ff4..dd56e11f339 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -212,7 +212,8 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
 			ctrl->vrs[14] = *vsp++;
 		ctrl->vrs[SP] = (unsigned long)vsp;
 	} else if (insn == 0xb0) {
-		ctrl->vrs[PC] = ctrl->vrs[LR];
+		if (ctrl->vrs[PC] == 0)
+			ctrl->vrs[PC] = ctrl->vrs[LR];
 		/* no further processing */
 		ctrl->entries = 0;
 	} else if (insn == 0xb1) {
@@ -309,18 +310,20 @@ int unwind_frame(struct stackframe *frame)
 	}
 
 	while (ctrl.entries > 0) {
-		int urc;
-
-		if (ctrl.vrs[SP] < low || ctrl.vrs[SP] >= high)
-			return -URC_FAILURE;
-		urc = unwind_exec_insn(&ctrl);
+		int urc = unwind_exec_insn(&ctrl);
 		if (urc < 0)
 			return urc;
+		if (ctrl.vrs[SP] < low || ctrl.vrs[SP] >= high)
+			return -URC_FAILURE;
 	}
 
 	if (ctrl.vrs[PC] == 0)
 		ctrl.vrs[PC] = ctrl.vrs[LR];
 
+	/* check for infinite loop */
+	if (frame->pc == ctrl.vrs[PC])
+		return -URC_FAILURE;
+
 	frame->fp = ctrl.vrs[FP];
 	frame->sp = ctrl.vrs[SP];
 	frame->lr = ctrl.vrs[LR];
@@ -332,7 +335,6 @@ int unwind_frame(struct stackframe *frame)
 void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk)
 {
 	struct stackframe frame;
-	unsigned long high, low;
 	register unsigned long current_sp asm ("sp");
 
 	pr_debug("%s(regs = %p tsk = %p)\n", __func__, regs, tsk);
@@ -362,9 +364,6 @@ void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk)
 		frame.pc = thread_saved_pc(tsk);
 	}
 
-	low = frame.sp & ~(THREAD_SIZE - 1);
-	high = low + THREAD_SIZE;
-
 	while (1) {
 		int urc;
 		unsigned long where = frame.pc;
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 6c077979254..4340bf3d2c8 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -84,6 +84,14 @@ SECTIONS
 		*(.exitcall.exit)
 		*(.ARM.exidx.exit.text)
 		*(.ARM.extab.exit.text)
+#ifndef CONFIG_HOTPLUG_CPU
+		*(.ARM.exidx.cpuexit.text)
+		*(.ARM.extab.cpuexit.text)
+#endif
+#ifndef CONFIG_HOTPLUG
+		*(.ARM.exidx.devexit.text)
+		*(.ARM.extab.devexit.text)
+#endif
 #ifndef CONFIG_MMU
 		*(.fixup)
 		*(__ex_table)
diff --git a/arch/arm/mach-davinci/include/mach/nand.h b/arch/arm/mach-davinci/include/mach/nand.h
index aa482841270..b520c4b5678 100644
--- a/arch/arm/mach-davinci/include/mach/nand.h
+++ b/arch/arm/mach-davinci/include/mach/nand.h
@@ -68,10 +68,14 @@ struct davinci_nand_pdata {		/* platform_data */
 
 	/* none  == NAND_ECC_NONE (strongly *not* advised!!)
 	 * soft  == NAND_ECC_SOFT
-	 * 1-bit == NAND_ECC_HW
-	 * 4-bit == NAND_ECC_HW_SYNDROME (not on all chips)
+	 * else  == NAND_ECC_HW, according to ecc_bits
+	 *
+	 * All DaVinci-family chips support 1-bit hardware ECC.
+	 * Newer ones also support 4-bit ECC, but are awkward
+	 * using it with large page chips.
 	 */
 	nand_ecc_modes_t	ecc_mode;
+	u8			ecc_bits;
 
 	/* e.g. NAND_BUSWIDTH_16 or NAND_USE_FLASH_BBT */
 	unsigned		options;
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h b/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
new file mode 100644
index 00000000000..83f31cd0a27
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
+ */
+
+#ifndef __ASM_ARCH_EP93XX_KEYPAD_H
+#define __ASM_ARCH_EP93XX_KEYPAD_H
+
+#define MAX_MATRIX_KEY_ROWS		(8)
+#define MAX_MATRIX_KEY_COLS		(8)
+
+/* flags for the ep93xx_keypad driver */
+#define EP93XX_KEYPAD_DISABLE_3_KEY	(1<<0)	/* disable 3-key reset */
+#define EP93XX_KEYPAD_DIAG_MODE		(1<<1)	/* diagnostic mode */
+#define EP93XX_KEYPAD_BACK_DRIVE	(1<<2)	/* back driving mode */
+#define EP93XX_KEYPAD_TEST_MODE		(1<<3)	/* scan only column 0 */
+#define EP93XX_KEYPAD_KDIV		(1<<4)	/* 1/4 clock or 1/16 clock */
+#define EP93XX_KEYPAD_AUTOREPEAT	(1<<5)	/* enable key autorepeat */
+
+/**
+ * struct ep93xx_keypad_platform_data - platform specific device structure
+ * @matrix_key_rows:		number of rows in the keypad matrix
+ * @matrix_key_cols:		number of columns in the keypad matrix
+ * @matrix_key_map:		array of keycodes defining the keypad matrix
+ * @matrix_key_map_size:	ARRAY_SIZE(matrix_key_map)
+ * @debounce:			debounce start count; terminal count is 0xff
+ * @prescale:			row/column counter pre-scaler load value
+ * @flags:			see above
+ */
+struct ep93xx_keypad_platform_data {
+	unsigned int	matrix_key_rows;
+	unsigned int	matrix_key_cols;
+	unsigned int	*matrix_key_map;
+	int		matrix_key_map_size;
+	unsigned int	debounce;
+	unsigned int	prescale;
+	unsigned int	flags;
+};
+
+/* macro for creating the matrix_key_map table */
+#define KEY(row, col, val)	(((row) << 28) | ((col) << 24) | (val))
+
+#endif	/* __ASM_ARCH_EP93XX_KEYPAD_H */
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index ba528f85749..b0665f161c0 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -302,7 +302,7 @@ int omap2_wait_clock_ready(void __iomem *reg, u32 mask, const char *name)
 		udelay(1);
 	}
 
-	if (i < MAX_CLOCK_ENABLE_WAIT)
+	if (i <= MAX_CLOCK_ENABLE_WAIT)
 		pr_debug("Clock %s stable after %d loops\n", name, i);
 	else
 		printk(KERN_ERR "Clock %s didn't enable in %d tries\n",
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 9e43fe5209d..045da923e75 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -286,6 +286,20 @@ static struct omap_clk omap34xx_clks[] = {
 
 #define MIN_SDRC_DLL_LOCK_FREQ		83000000
 
+#define CYCLES_PER_MHZ			1000000
+
+/* Scale factor for fixed-point arith in omap3_core_dpll_m2_set_rate() */
+#define SDRC_MPURATE_SCALE		8
+
+/* 2^SDRC_MPURATE_BASE_SHIFT: MPU MHz that SDRC_MPURATE_LOOPS is defined for */
+#define SDRC_MPURATE_BASE_SHIFT		9
+
+/*
+ * SDRC_MPURATE_LOOPS: Number of MPU loops to execute at
+ * 2^MPURATE_BASE_SHIFT MHz for SDRC to stabilize
+ */
+#define SDRC_MPURATE_LOOPS		96
+
 /**
  * omap3_dpll_recalc - recalculate DPLL rate
  * @clk: DPLL struct clk
@@ -709,7 +723,8 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 {
 	u32 new_div = 0;
 	u32 unlock_dll = 0;
-	unsigned long validrate, sdrcrate;
+	u32 c;
+	unsigned long validrate, sdrcrate, mpurate;
 	struct omap_sdrc_params *sp;
 
 	if (!clk || !rate)
@@ -718,18 +733,15 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 	if (clk != &dpll3_m2_ck)
 		return -EINVAL;
 
-	if (rate == clk->rate)
-		return 0;
-
 	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
 	if (validrate != rate)
 		return -EINVAL;
 
 	sdrcrate = sdrc_ick.rate;
 	if (rate > clk->rate)
-		sdrcrate <<= ((rate / clk->rate) - 1);
+		sdrcrate <<= ((rate / clk->rate) >> 1);
 	else
-		sdrcrate >>= ((clk->rate / rate) - 1);
+		sdrcrate >>= ((clk->rate / rate) >> 1);
 
 	sp = omap2_sdrc_get_params(sdrcrate);
 	if (!sp)
@@ -740,17 +752,25 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 		unlock_dll = 1;
 	}
 
+	/*
+	 * XXX This only needs to be done when the CPU frequency changes
+	 */
+	mpurate = arm_fck.rate / CYCLES_PER_MHZ;
+	c = (mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
+	c += 1;  /* for safety */
+	c *= SDRC_MPURATE_LOOPS;
+	c >>= SDRC_MPURATE_SCALE;
+	if (c == 0)
+		c = 1;
+
 	pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
 		 validrate);
 	pr_debug("clock: SDRC timing params used: %08x %08x %08x\n",
 		 sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
 
-	/* REVISIT: SRAM code doesn't support other M2 divisors yet */
-	WARN_ON(new_div != 1 && new_div != 2);
-
-	/* REVISIT: Add SDRC_MR changing to this code also */
 	omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
-				  sp->actim_ctrlb, new_div, unlock_dll);
+				  sp->actim_ctrlb, new_div, unlock_dll, c,
+				  sp->mr, rate > clk->rate);
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 32afd944821..3a86b0f6603 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -21,6 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/clk.h>
 
 #include <asm/tlb.h>
 
@@ -241,6 +242,40 @@ void __init omap2_map_common_io(void)
 	omapfb_reserve_sdram();
 }
 
+/*
+ * omap2_init_reprogram_sdrc - reprogram SDRC timing parameters
+ *
+ * Sets the CORE DPLL3 M2 divider to the same value that it's at
+ * currently.  This has the effect of setting the SDRC SDRAM AC timing
+ * registers to the values currently defined by the kernel.  Currently
+ * only defined for OMAP3; will return 0 if called on OMAP2.  Returns
+ * -EINVAL if the dpll3_m2_ck cannot be found, 0 if called on OMAP2,
+ * or passes along the return value of clk_set_rate().
+ */
+static int __init _omap2_init_reprogram_sdrc(void)
+{
+	struct clk *dpll3_m2_ck;
+	int v = -EINVAL;
+	long rate;
+
+	if (!cpu_is_omap34xx())
+		return 0;
+
+	dpll3_m2_ck = clk_get(NULL, "dpll3_m2_ck");
+	if (!dpll3_m2_ck)
+		return -EINVAL;
+
+	rate = clk_get_rate(dpll3_m2_ck);
+	pr_info("Reprogramming SDRC clock to %ld Hz\n", rate);
+	v = clk_set_rate(dpll3_m2_ck, rate);
+	if (v)
+		pr_err("dpll3_m2_clk rate change failed: %d\n", v);
+
+	clk_put(dpll3_m2_ck);
+
+	return v;
+}
+
 void __init omap2_init_common_hw(struct omap_sdrc_params *sp)
 {
 	omap2_mux_init();
@@ -249,6 +284,7 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sp)
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
 	omap2_clk_init();
 	omap2_sdrc_init(sp);
+	_omap2_init_reprogram_sdrc();
 #endif
 	gpmc_init();
 }
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 73e2971b175..983f1cb676b 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -1099,7 +1099,7 @@ int pwrdm_wait_transition(struct powerdomain *pwrdm)
 	       (c++ < PWRDM_TRANSITION_BAILOUT))
 		udelay(1);
 
-	if (c >= PWRDM_TRANSITION_BAILOUT) {
+	if (c > PWRDM_TRANSITION_BAILOUT) {
 		printk(KERN_ERR "powerdomain: waited too long for "
 		       "powerdomain %s to complete transition\n", pwrdm->name);
 		return -EAGAIN;
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index c080c82521e..f41f8d96ddb 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -3,13 +3,12 @@
  *
  * Omap3 specific functions that need to be run in internal SRAM
  *
- * (C) Copyright 2007
- * Texas Instruments Inc.
- * Rajendra Nayak <rnayak@ti.com>
+ * Copyright (C) 2004, 2007, 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008 Nokia Corporation
  *
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
+ * Rajendra Nayak <rnayak@ti.com>
  * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -37,61 +36,112 @@
 
 	.text
 
+/* r4 parameters */
+#define SDRC_NO_UNLOCK_DLL		0x0
+#define SDRC_UNLOCK_DLL			0x1
+
+/* SDRC_DLLA_CTRL bit settings */
+#define FIXEDDELAY_SHIFT		24
+#define FIXEDDELAY_MASK			(0xff << FIXEDDELAY_SHIFT)
+#define DLLIDLE_MASK			0x4
+
+/*
+ * SDRC_DLLA_CTRL default values: TI hardware team indicates that
+ * FIXEDDELAY should be initialized to 0xf.  This apparently was
+ * empirically determined during process testing, so no derivation
+ * was provided.
+ */
+#define FIXEDDELAY_DEFAULT		(0x0f << FIXEDDELAY_SHIFT)
+
+/* SDRC_DLLA_STATUS bit settings */
+#define LOCKSTATUS_MASK			0x4
+
+/* SDRC_POWER bit settings */
+#define SRFRONIDLEREQ_MASK		0x40
+#define PWDENA_MASK			0x4
+
+/* CM_IDLEST1_CORE bit settings */
+#define ST_SDRC_MASK			0x2
+
+/* CM_ICLKEN1_CORE bit settings */
+#define EN_SDRC_MASK			0x2
+
+/* CM_CLKSEL1_PLL bit settings */
+#define CORE_DPLL_CLKOUT_DIV_SHIFT	0x1b
+
 /*
- * Change frequency of core dpll
- * r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2
- * r4 = Unlock SDRC DLL? (1 = yes, 0 = no) -- only unlock DLL for
+ * omap3_sram_configure_core_dpll - change DPLL3 M2 divider
+ * r0 = new SDRC_RFR_CTRL register contents
+ * r1 = new SDRC_ACTIM_CTRLA register contents
+ * r2 = new SDRC_ACTIM_CTRLB register contents
+ * r3 = new M2 divider setting (only 1 and 2 supported right now)
+ * r4 = unlock SDRC DLL? (1 = yes, 0 = no).  Only unlock DLL for
  *      SDRC rates < 83MHz
+ * r5 = number of MPU cycles to wait for SDRC to stabilize after
+ *      reprogramming the SDRC when switching to a slower MPU speed
+ * r6 = new SDRC_MR_0 register value
+ * r7 = increasing SDRC rate? (1 = yes, 0 = no)
+ *
  */
 ENTRY(omap3_sram_configure_core_dpll)
 	stmfd	sp!, {r1-r12, lr}	@ store regs to stack
 	ldr	r4, [sp, #52]		@ pull extra args off the stack
+	ldr	r5, [sp, #56]		@ load extra args from the stack
+	ldr	r6, [sp, #60]		@ load extra args from the stack
+	ldr	r7, [sp, #64]		@ load extra args from the stack
 	dsb				@ flush buffered writes to interconnect
-	cmp	r3, #0x2
-	blne	configure_sdrc
-	cmp	r4, #0x1
+	cmp	r7, #1			@ if increasing SDRC clk rate,
+	bleq	configure_sdrc		@ program the SDRC regs early (for RFR)
+	cmp	r4, #SDRC_UNLOCK_DLL	@ set the intended DLL state
 	bleq	unlock_dll
 	blne	lock_dll
-	bl	sdram_in_selfrefresh	@ put the SDRAM in self refresh
-	bl 	configure_core_dpll
-	bl	enable_sdrc
-	cmp	r4, #0x1
+	bl	sdram_in_selfrefresh	@ put SDRAM in self refresh, idle SDRC
+	bl 	configure_core_dpll	@ change the DPLL3 M2 divider
+	bl	enable_sdrc		@ take SDRC out of idle
+	cmp	r4, #SDRC_UNLOCK_DLL	@ wait for DLL status to change
 	bleq	wait_dll_unlock
 	blne	wait_dll_lock
-	cmp	r3, #0x1
-	blne	configure_sdrc
+	cmp	r7, #1			@ if increasing SDRC clk rate,
+	beq	return_to_sdram		@ return to SDRAM code, otherwise,
+	bl	configure_sdrc		@ reprogram SDRC regs now
+	mov	r12, r5
+	bl	wait_clk_stable		@ wait for SDRC to stabilize
+return_to_sdram:
 	isb				@ prevent speculative exec past here
 	mov 	r0, #0 			@ return value
 	ldmfd	sp!, {r1-r12, pc}	@ restore regs and return
 unlock_dll:
 	ldr	r11, omap3_sdrc_dlla_ctrl
 	ldr	r12, [r11]
-	orr	r12, r12, #0x4
+	and	r12, r12, #FIXEDDELAY_MASK
+	orr	r12, r12, #FIXEDDELAY_DEFAULT
+	orr	r12, r12, #DLLIDLE_MASK
 	str	r12, [r11]		@ (no OCP barrier needed)
 	bx	lr
 lock_dll:
 	ldr	r11, omap3_sdrc_dlla_ctrl
 	ldr	r12, [r11]
-	bic	r12, r12, #0x4
+	bic	r12, r12, #DLLIDLE_MASK
 	str	r12, [r11]		@ (no OCP barrier needed)
 	bx	lr
 sdram_in_selfrefresh:
 	ldr	r11, omap3_sdrc_power	@ read the SDRC_POWER register
 	ldr	r12, [r11]		@ read the contents of SDRC_POWER
 	mov	r9, r12			@ keep a copy of SDRC_POWER bits
-	orr 	r12, r12, #0x40		@ enable self refresh on idle req
-	bic 	r12, r12, #0x4		@ clear PWDENA
+	orr 	r12, r12, #SRFRONIDLEREQ_MASK	@ enable self refresh on idle
+	bic 	r12, r12, #PWDENA_MASK	@ clear PWDENA
 	str 	r12, [r11]		@ write back to SDRC_POWER register
 	ldr	r12, [r11]		@ posted-write barrier for SDRC
+idle_sdrc:
 	ldr	r11, omap3_cm_iclken1_core	@ read the CM_ICLKEN1_CORE reg
 	ldr	r12, [r11]
-	bic	r12, r12, #0x2		@ disable iclk bit for SDRC
+	bic	r12, r12, #EN_SDRC_MASK		@ disable iclk bit for SDRC
 	str 	r12, [r11]
 wait_sdrc_idle:
 	ldr 	r11, omap3_cm_idlest1_core
 	ldr 	r12, [r11]
-	and 	r12, r12, #0x2		@ check for SDRC idle
-	cmp 	r12, #2
+	and 	r12, r12, #ST_SDRC_MASK		@ check for SDRC idle
+	cmp 	r12, #ST_SDRC_MASK
 	bne 	wait_sdrc_idle
 	bx 	lr
 configure_core_dpll:
@@ -99,36 +149,23 @@ configure_core_dpll:
 	ldr	r12, [r11]
 	ldr	r10, core_m2_mask_val	@ modify m2 for core dpll
 	and	r12, r12, r10
-	orr	r12, r12, r3, lsl #0x1B	@ r3 contains the M2 val
+	orr	r12, r12, r3, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT
 	str	r12, [r11]
 	ldr	r12, [r11]		@ posted-write barrier for CM
-	mov 	r12, #0x800		@ wait for the clock to stabilise
-	cmp	r3, #2
-	bne	wait_clk_stable
 	bx	lr
 wait_clk_stable:
 	subs 	r12, r12, #1
 	bne	wait_clk_stable
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
 	bx	lr
 enable_sdrc:
 	ldr 	r11, omap3_cm_iclken1_core
 	ldr	r12, [r11]
-	orr 	r12, r12, #0x2		@ enable iclk bit for SDRC
+	orr 	r12, r12, #EN_SDRC_MASK		@ enable iclk bit for SDRC
 	str 	r12, [r11]
 wait_sdrc_idle1:
 	ldr 	r11, omap3_cm_idlest1_core
 	ldr	r12, [r11]
-	and 	r12, r12, #0x2
+	and 	r12, r12, #ST_SDRC_MASK
 	cmp	r12, #0
 	bne	wait_sdrc_idle1
 restore_sdrc_power_val:
@@ -138,14 +175,14 @@ restore_sdrc_power_val:
 wait_dll_lock:
 	ldr	r11, omap3_sdrc_dlla_status
 	ldr	r12, [r11]
-	and 	r12, r12, #0x4
-	cmp	r12, #0x4
+	and 	r12, r12, #LOCKSTATUS_MASK
+	cmp	r12, #LOCKSTATUS_MASK
 	bne	wait_dll_lock
 	bx	lr
 wait_dll_unlock:
 	ldr	r11, omap3_sdrc_dlla_status
 	ldr	r12, [r11]
-	and	r12, r12, #0x4
+	and	r12, r12, #LOCKSTATUS_MASK
 	cmp	r12, #0x0
 	bne	wait_dll_unlock
 	bx	lr
@@ -156,7 +193,9 @@ configure_sdrc:
 	str	r1, [r11]
 	ldr	r11, omap3_sdrc_actim_ctrlb
 	str	r2, [r11]
-	ldr	r2, [r11]		@ posted-write barrier for SDRC
+	ldr	r11, omap3_sdrc_mr_0
+	str	r6, [r11]
+	ldr	r6, [r11]		@ posted-write barrier for SDRC
 	bx	lr
 
 omap3_sdrc_power:
@@ -173,6 +212,8 @@ omap3_sdrc_actim_ctrla:
 	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0)
 omap3_sdrc_actim_ctrlb:
 	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0)
+omap3_sdrc_mr_0:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_MR_0)
 omap3_sdrc_dlla_status:
 	.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
 omap3_sdrc_dlla_ctrl:
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index 6f3f77d031d..d78731edebb 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -200,6 +200,6 @@ void __init orion5x_setup_pcie_wa_win(u32 base, u32 size)
 
 int __init orion5x_setup_sram_win(void)
 {
-	return setup_cpu_win(win_alloc_count, ORION5X_SRAM_PHYS_BASE,
+	return setup_cpu_win(win_alloc_count++, ORION5X_SRAM_PHYS_BASE,
 			ORION5X_SRAM_SIZE, TARGET_SRAM, ATTR_SRAM, -1);
 }
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index eafcc49009e..f87fa125380 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -562,7 +562,7 @@ static struct platform_device orion5x_crypto_device = {
 	.resource       = orion5x_crypto_res,
 };
 
-int __init orion5x_crypto_init(void)
+static int __init orion5x_crypto_init(void)
 {
 	int ret;
 
@@ -697,6 +697,14 @@ void __init orion5x_init(void)
 	}
 
 	/*
+	 * The 5082/5181l/5182/6082/6082l/6183 have crypto
+	 * while 5180n/5181/5281 don't have crypto.
+	 */
+	if ((dev == MV88F5181_DEV_ID && rev >= MV88F5181L_REV_A0) ||
+	    dev == MV88F5182_DEV_ID || dev == MV88F6183_DEV_ID)
+		orion5x_crypto_init();
+
+	/*
 	 * Register watchdog driver
 	 */
 	orion5x_wdt_init();
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index de483e83edd..8f004503c96 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -38,7 +38,6 @@ void orion5x_spi_init(void);
 void orion5x_uart0_init(void);
 void orion5x_uart1_init(void);
 void orion5x_xor_init(void);
-int orion5x_crypto_init(void);
 
 /*
  * PCIe/PCI functions.
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index f4533f8ff4e..89c992b8f75 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -401,6 +401,16 @@ config MACH_PALMZ72
 	  Say Y here if you intend to run this kernel on Palm Zire 72
 	  handheld computer.
 
+config MACH_TREO680
+	bool "Palm Treo 680"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	help
+	  Say Y here if you intend to run this kernel on Palm Treo 680
+	  smartphone.
+
 config MACH_PALMLD
 	bool "Palm LifeDrive"
 	default y
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index d18ffef44b8..d4c6122a342 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -62,6 +62,7 @@ obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
 obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
 obj-$(CONFIG_MACH_PALMLD)	+= palmld.o
 obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o
+obj-$(CONFIG_MACH_TREO680)	+= treo680.o
 obj-$(CONFIG_ARCH_VIPER)	+= viper.o
 
 ifeq ($(CONFIG_MACH_ZYLONITE),y)
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 962dda2e154..5363e1aea3f 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -23,6 +23,7 @@
 #include <linux/pm.h>
 #include <linux/gpio.h>
 #include <linux/backlight.h>
+#include <linux/i2c.h>
 #include <linux/io.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
@@ -600,6 +601,10 @@ static struct platform_device *devices[] __initdata = {
 	&sharpsl_rom_device,
 };
 
+static struct i2c_board_info __initdata corgi_i2c_devices[] = {
+	{ I2C_BOARD_INFO("wm8731", 0x1b) },
+};
+
 static void corgi_poweroff(void)
 {
 	if (!machine_is_corgi())
@@ -634,6 +639,7 @@ static void __init corgi_init(void)
 	pxa_set_mci_info(&corgi_mci_platform_data);
 	pxa_set_ficp_info(&corgi_ficp_platform_data);
 	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(corgi_i2c_devices));
 
 	platform_scoop_config = &corgi_pcmcia_config;
 
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 243e0802b5f..63b10d9bb1d 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -30,6 +30,7 @@
 #include <linux/apm-emulation.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
+#include <linux/regulator/userspace-consumer.h>
 
 #include <media/soc_camera.h>
 
@@ -735,6 +736,7 @@ static struct pxa2xx_spi_chip em_x270_libertas_chip = {
 	.rx_threshold	= 1,
 	.tx_threshold	= 1,
 	.timeout	= 1000,
+	.gpio_cs	= 14,
 };
 
 static unsigned long em_x270_libertas_pin_config[] = {
@@ -803,7 +805,6 @@ static int em_x270_libertas_teardown(struct spi_device *spi)
 
 struct libertas_spi_platform_data em_x270_libertas_pdata = {
 	.use_dummy_writes	= 1,
-	.gpio_cs		= 14,
 	.setup			= em_x270_libertas_setup,
 	.teardown		= em_x270_libertas_teardown,
 };
@@ -838,10 +839,14 @@ static void __init em_x270_init_spi(void)
 static inline void em_x270_init_spi(void) {}
 #endif
 
-#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+#if defined(CONFIG_SND_PXA2XX_LIB_AC97)
+static pxa2xx_audio_ops_t em_x270_ac97_info = {
+	.reset_gpio = 113,
+};
+
 static void __init em_x270_init_ac97(void)
 {
-	pxa_set_ac97_info(NULL);
+	pxa_set_ac97_info(&em_x270_ac97_info);
 }
 #else
 static inline void em_x270_init_ac97(void) {}
@@ -1038,6 +1043,52 @@ static void  __init em_x270_init_camera(void)
 static inline void em_x270_init_camera(void) {}
 #endif
 
+static struct regulator_bulk_data em_x270_gps_consumer_supply = {
+	.supply		= "vcc gps",
+};
+
+static struct regulator_userspace_consumer_data em_x270_gps_consumer_data = {
+	.name		= "vcc gps",
+	.num_supplies	= 1,
+	.supplies	= &em_x270_gps_consumer_supply,
+};
+
+static struct platform_device em_x270_gps_userspace_consumer = {
+	.name		= "reg-userspace-consumer",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &em_x270_gps_consumer_data,
+	},
+};
+
+static struct regulator_bulk_data em_x270_gprs_consumer_supply = {
+	.supply		= "vcc gprs",
+};
+
+static struct regulator_userspace_consumer_data em_x270_gprs_consumer_data = {
+	.name		= "vcc gprs",
+	.num_supplies	= 1,
+	.supplies	= &em_x270_gprs_consumer_supply
+};
+
+static struct platform_device em_x270_gprs_userspace_consumer = {
+	.name		= "reg-userspace-consumer",
+	.id		= 1,
+	.dev		= {
+		.platform_data = &em_x270_gprs_consumer_data,
+	}
+};
+
+static struct platform_device *em_x270_userspace_consumers[] = {
+	&em_x270_gps_userspace_consumer,
+	&em_x270_gprs_userspace_consumer,
+};
+
+static void __init em_x270_userspace_consumers_init(void)
+{
+	platform_add_devices(ARRAY_AND_SIZE(em_x270_userspace_consumers));
+}
+
 /* DA9030 related initializations */
 #define REGULATOR_CONSUMER(_name, _dev, _supply)			       \
 	static struct regulator_consumer_supply _name##_consumers[] = {	\
@@ -1047,11 +1098,11 @@ static inline void em_x270_init_camera(void) {}
 		},							\
 	}
 
-REGULATOR_CONSUMER(ldo3, NULL, "vcc gps");
+REGULATOR_CONSUMER(ldo3, &em_x270_gps_userspace_consumer.dev, "vcc gps");
 REGULATOR_CONSUMER(ldo5, NULL, "vcc cam");
 REGULATOR_CONSUMER(ldo10, &pxa_device_mci.dev, "vcc sdio");
 REGULATOR_CONSUMER(ldo12, NULL, "vcc usb");
-REGULATOR_CONSUMER(ldo19, NULL, "vcc gprs");
+REGULATOR_CONSUMER(ldo19, &em_x270_gprs_userspace_consumer.dev, "vcc gprs");
 
 #define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask)		\
 	static struct regulator_init_data _ldo##_data = {		\
@@ -1062,6 +1113,7 @@ REGULATOR_CONSUMER(ldo19, NULL, "vcc gprs");
 				.enabled = 0,				\
 			},						\
 			.valid_ops_mask = _ops_mask,			\
+			.apply_uV = 1,					\
 		},							\
 		.num_consumer_supplies = ARRAY_SIZE(_ldo##_consumers),	\
 		.consumer_supplies = _ldo##_consumers,			\
@@ -1240,6 +1292,7 @@ static void __init em_x270_init(void)
 	em_x270_init_spi();
 	em_x270_init_i2c();
 	em_x270_init_camera();
+	em_x270_userspace_consumers_init();
 }
 
 MACHINE_START(EM_X270, "Compulab EM-X270")
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 7fff467e84f..81359d574f8 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -30,6 +30,7 @@
 #include <linux/pwm_backlight.h>
 #include <linux/regulator/bq24022.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/max1586.h>
 #include <linux/spi/ads7846.h>
 #include <linux/spi/spi.h>
 #include <linux/usb/gpio_vbus.h>
@@ -775,6 +776,45 @@ static struct platform_device strataflash = {
 };
 
 /*
+ * Maxim MAX1587A on PI2C
+ */
+
+static struct regulator_consumer_supply max1587a_consumer = {
+	.supply = "vcc_core",
+};
+
+static struct regulator_init_data max1587a_v3_info = {
+	.constraints = {
+		.name = "vcc_core range",
+		.min_uV =  900000,
+		.max_uV = 1705000,
+		.always_on = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies = 1,
+	.consumer_supplies     = &max1587a_consumer,
+};
+
+static struct max1586_subdev_data max1587a_subdev = {
+	.name = "vcc_core",
+	.id   = MAX1586_V3,
+	.platform_data = &max1587a_v3_info,
+};
+
+static struct max1586_platform_data max1587a_info = {
+	.num_subdevs = 1,
+	.subdevs     = &max1587a_subdev,
+	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
+};
+
+static struct i2c_board_info __initdata pi2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("max1586", 0x14),
+		.platform_data = &max1587a_info,
+	},
+};
+
+/*
  * PCMCIA
  */
 
@@ -828,6 +868,7 @@ static void __init hx4700_init(void)
 	pxa_set_ficp_info(&ficp_info);
 	pxa27x_set_i2c_power_info(NULL);
 	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info));
 	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
 	spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
 
diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h
index 5032307ebf7..2806ef69ba5 100644
--- a/arch/arm/mach-pxa/include/mach/palmz72.h
+++ b/arch/arm/mach-pxa/include/mach/palmz72.h
@@ -21,7 +21,7 @@
 /* SD/MMC */
 #define GPIO_NR_PALMZ72_SD_DETECT_N		14
 #define GPIO_NR_PALMZ72_SD_POWER_N		98
-#define GPIO_NR_PALMZ72_SD_RO 115
+#define GPIO_NR_PALMZ72_SD_RO			115
 
 /* Touchscreen */
 #define GPIO_NR_PALMZ72_WM9712_IRQ		27
@@ -31,8 +31,7 @@
 
 /* USB */
 #define GPIO_NR_PALMZ72_USB_DETECT_N		15
-#define GPIO_NR_PALMZ72_USB_POWER		95
-#define GPIO_NR_PALMZ72_USB_PULLUP		12
+#define GPIO_NR_PALMZ72_USB_PULLUP		95
 
 /* LCD/Backlight */
 #define GPIO_NR_PALMZ72_BL_POWER		20
diff --git a/arch/arm/mach-pxa/include/mach/treo680.h b/arch/arm/mach-pxa/include/mach/treo680.h
new file mode 100644
index 00000000000..af443b24d99
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/treo680.h
@@ -0,0 +1,49 @@
+/*
+ * GPIOs and interrupts for Palm Treo 680 smartphone
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_TREO680_H_
+#define _INCLUDE_TREO680_H_
+
+/* GPIOs */
+#define GPIO_NR_TREO680_POWER_DETECT	0
+#define GPIO_NR_TREO680_AMP_EN		27
+#define GPIO_NR_TREO680_KEYB_BL		24
+#define GPIO_NR_TREO680_VIBRATE_EN	44
+#define GPIO_NR_TREO680_GREEN_LED	20
+#define GPIO_NR_TREO680_RED_LED		79
+#define GPIO_NR_TREO680_SD_DETECT_N	113
+#define GPIO_NR_TREO680_SD_READONLY	33
+#define GPIO_NR_TREO680_EP_DETECT_N	116
+#define GPIO_NR_TREO680_SD_POWER	42
+#define GPIO_NR_TREO680_USB_DETECT	1
+#define GPIO_NR_TREO680_USB_PULLUP	114
+#define GPIO_NR_TREO680_GSM_POWER	40
+#define GPIO_NR_TREO680_GSM_RESET	87
+#define GPIO_NR_TREO680_GSM_WAKE	57
+#define GPIO_NR_TREO680_GSM_HOST_WAKE	14
+#define GPIO_NR_TREO680_GSM_TRIGGER	10
+#define GPIO_NR_TREO680_BT_EN		43
+#define GPIO_NR_TREO680_IR_EN		115
+#define GPIO_NR_TREO680_IR_TXD		47
+#define GPIO_NR_TREO680_BL_POWER	38
+#define GPIO_NR_TREO680_LCD_POWER	25
+
+/* Various addresses  */
+#define TREO680_PHYS_RAM_START	0xa0000000
+#define TREO680_PHYS_IO_START	0x40000000
+#define TREO680_STR_BASE	0xa2000000
+
+/* BACKLIGHT */
+#define TREO680_MAX_INTENSITY		254
+#define TREO680_DEFAULT_INTENSITY	160
+#define TREO680_LIMIT_MASK		0x7F
+#define TREO680_PRESCALER		63
+#define TREO680_PERIOD_NS		3500
+
+#endif
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 4dc8c2ec40a..2d28132c725 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -37,6 +37,7 @@
 #include <linux/wm97xx_batt.h>
 #include <linux/mtd/physmap.h>
 #include <linux/usb/gpio_vbus.h>
+#include <linux/regulator/max1586.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -717,6 +718,38 @@ static struct wm97xx_batt_info mioa701_battery_data = {
 };
 
 /*
+ * Voltage regulation
+ */
+static struct regulator_consumer_supply max1586_consumers[] = {
+	{
+		.supply = "vcc_core",
+	}
+};
+
+static struct regulator_init_data max1586_v3_info = {
+	.constraints = {
+		.name = "vcc_core range",
+		.min_uV = 1000000,
+		.max_uV = 1705000,
+		.always_on = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(max1586_consumers),
+	.consumer_supplies = max1586_consumers,
+};
+
+static struct max1586_subdev_data max1586_subdevs[] = {
+	{ .name = "vcc_core", .id = MAX1586_V3,
+	  .platform_data = &max1586_v3_info },
+};
+
+static struct max1586_platform_data max1586_info = {
+	.subdevs = max1586_subdevs,
+	.num_subdevs = ARRAY_SIZE(max1586_subdevs),
+	.v3_gain = MAX1586_GAIN_NO_R24, /* 700..1475 mV */
+};
+
+/*
  * Camera interface
  */
 struct pxacamera_platform_data mioa701_pxacamera_platform_data = {
@@ -725,6 +758,13 @@ struct pxacamera_platform_data mioa701_pxacamera_platform_data = {
 	.mclk_10khz = 5000,
 };
 
+static struct i2c_board_info __initdata mioa701_pi2c_devices[] = {
+	{
+		I2C_BOARD_INFO("max1586", 0x14),
+		.platform_data = &max1586_info,
+	},
+};
+
 static struct soc_camera_link iclink = {
 	.bus_id	= 0, /* Must match id in pxa27x_device_camera in device.c */
 };
@@ -825,7 +865,9 @@ static void __init mioa701_machine_init(void)
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	gsm_init();
 
+	i2c_register_board_info(1, ARRAY_AND_SIZE(mioa701_pi2c_devices));
 	pxa_set_i2c_info(&i2c_pdata);
+	pxa27x_set_i2c_power_info(NULL);
 	pxa_set_camera_info(&mioa701_pxacamera_platform_data);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(mioa701_i2c_devices));
 }
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index b88eb4dd2c8..c3645aa3fa3 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -27,7 +27,9 @@
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
 #include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -41,6 +43,8 @@
 #include <mach/irda.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/udc.h>
+#include <mach/palmasoc.h>
+
 #include <mach/pm.h>
 
 #include "generic.h"
@@ -66,6 +70,8 @@ static unsigned long palmz72_pin_config[] __initdata = {
 	GPIO29_AC97_SDATA_IN_0,
 	GPIO30_AC97_SDATA_OUT,
 	GPIO31_AC97_SYNC,
+	GPIO89_AC97_SYSCLK,
+	GPIO113_AC97_nRESET,
 
 	/* IrDA */
 	GPIO49_GPIO,	/* ir disable */
@@ -77,8 +83,7 @@ static unsigned long palmz72_pin_config[] __initdata = {
 
 	/* USB */
 	GPIO15_GPIO,	/* usb detect */
-	GPIO12_GPIO,	/* usb pullup */
-	GPIO95_GPIO,	/* usb power */
+	GPIO95_GPIO,	/* usb pullup */
 
 	/* Matrix keypad */
 	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
@@ -355,6 +360,22 @@ static struct platform_device palmz72_leds = {
 };
 
 /******************************************************************************
+ * UDC
+ ******************************************************************************/
+static struct gpio_vbus_mach_info palmz72_udc_info = {
+	.gpio_vbus		= GPIO_NR_PALMZ72_USB_DETECT_N,
+	.gpio_pullup		= GPIO_NR_PALMZ72_USB_PULLUP,
+};
+
+static struct platform_device palmz72_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &palmz72_udc_info,
+	},
+};
+
+/******************************************************************************
  * Power supply
  ******************************************************************************/
 static int power_supply_init(struct device *dev)
@@ -422,6 +443,31 @@ static struct platform_device power_supply = {
 };
 
 /******************************************************************************
+ * WM97xx battery
+ ******************************************************************************/
+static struct wm97xx_batt_info wm97xx_batt_pdata = {
+	.batt_aux	= WM97XX_AUX_ID3,
+	.temp_aux	= WM97XX_AUX_ID2,
+	.charge_gpio	= -1,
+	.max_voltage	= PALMZ72_BAT_MAX_VOLTAGE,
+	.min_voltage	= PALMZ72_BAT_MIN_VOLTAGE,
+	.batt_mult	= 1000,
+	.batt_div	= 414,
+	.temp_mult	= 1,
+	.temp_div	= 1,
+	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
+	.batt_name	= "main-batt",
+};
+
+/******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+static struct platform_device palmz72_asoc = {
+	.name = "palm27x-asoc",
+	.id   = -1,
+};
+
+/******************************************************************************
  * Framebuffer
  ******************************************************************************/
 static struct pxafb_mode_info palmz72_lcd_modes[] = {
@@ -527,17 +573,32 @@ device_initcall(palmz72_pm_init);
 static struct platform_device *devices[] __initdata = {
 	&palmz72_backlight,
 	&palmz72_leds,
+	&palmz72_asoc,
 	&power_supply,
+	&palmz72_gpio_vbus,
 };
 
+/* setup udc GPIOs initial state */
+static void __init palmz72_udc_init(void)
+{
+	if (!gpio_request(GPIO_NR_PALMZ72_USB_PULLUP, "USB Pullup")) {
+		gpio_direction_output(GPIO_NR_PALMZ72_USB_PULLUP, 0);
+		gpio_free(GPIO_NR_PALMZ72_USB_PULLUP);
+	}
+}
+
 static void __init palmz72_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config));
+
 	set_pxa_fb_info(&palmz72_lcd_screen);
 	pxa_set_mci_info(&palmz72_mci_platform_data);
+	palmz72_udc_init();
 	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&palmz72_ficp_platform_data);
 	pxa_set_keypad_info(&palmz72_keypad_platform_data);
+	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index ac431ed1039..9352d4a3483 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -22,6 +22,7 @@
 #include <linux/delay.h>
 #include <linux/mtd/physmap.h>
 #include <linux/gpio.h>
+#include <linux/i2c.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/mtd/sharpsl.h>
@@ -486,6 +487,10 @@ static struct platform_device *devices[] __initdata = {
 	&sharpsl_rom_device,
 };
 
+static struct i2c_board_info __initdata poodle_i2c_devices[] = {
+	{ I2C_BOARD_INFO("wm8731", 0x1b) },
+};
+
 static void poodle_poweroff(void)
 {
 	arm_machine_restart('h', NULL);
@@ -519,6 +524,7 @@ static void __init poodle_init(void)
 	pxa_set_mci_info(&poodle_mci_platform_data);
 	pxa_set_ficp_info(&poodle_ficp_platform_data);
 	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(poodle_i2c_devices));
 	poodle_init_spi();
 }
 
diff --git a/arch/arm/mach-pxa/treo680.c b/arch/arm/mach-pxa/treo680.c
new file mode 100644
index 00000000000..a06f19edebb
--- /dev/null
+++ b/arch/arm/mach-pxa/treo680.c
@@ -0,0 +1,612 @@
+/*
+ * Hardware definitions for Palm Treo 680
+ *
+ * Author:     Tomas Cech <sleep_walker@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
+#include <linux/power_supply.h>
+#include <linux/sysdev.h>
+#include <linux/w1-gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/pxa27x.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/audio.h>
+#include <mach/treo680.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/irda.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/udc.h>
+#include <mach/ohci.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/palmasoc.h>
+#include <mach/camera.h>
+
+#include <sound/pxa2xx-lib.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long treo680_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO33_GPIO,				/* SD read only */
+	GPIO113_GPIO,				/* SD detect */
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO89_AC97_SYSCLK,
+	GPIO95_AC97_nRESET,
+
+	/* IrDA */
+	GPIO46_FICP_RXD,
+	GPIO47_FICP_TXD,
+
+	/* PWM */
+	GPIO16_PWM0_OUT,
+
+	/* USB */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,	/* usb detect */
+
+	/* MATRIX KEYPAD */
+	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1,
+	GPIO102_KP_MKIN_2,
+	GPIO97_KP_MKIN_3,
+	GPIO98_KP_MKIN_4,
+	GPIO99_KP_MKIN_5,
+	GPIO91_KP_MKIN_6,
+	GPIO13_KP_MKIN_7,
+	GPIO103_KP_MKOUT_0 | MFP_LPM_DRIVE_HIGH,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+	GPIO107_KP_MKOUT_4,
+	GPIO108_KP_MKOUT_5,
+	GPIO96_KP_MKOUT_6,
+	GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,	/* Hotsync button */
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+
+	/* Quick Capture Interface */
+	GPIO84_CIF_FV,
+	GPIO85_CIF_LV,
+	GPIO53_CIF_MCLK,
+	GPIO54_CIF_PCLK,
+	GPIO81_CIF_DD_0,
+	GPIO55_CIF_DD_1,
+	GPIO51_CIF_DD_2,
+	GPIO50_CIF_DD_3,
+	GPIO52_CIF_DD_4,
+	GPIO48_CIF_DD_5,
+	GPIO17_CIF_DD_6,
+	GPIO12_CIF_DD_7,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* GSM */
+	GPIO14_GPIO | WAKEUP_ON_EDGE_BOTH,	/* GSM host wake up */
+	GPIO34_FFUART_RXD,
+	GPIO35_FFUART_CTS,
+	GPIO39_FFUART_TXD,
+	GPIO41_FFUART_RTS,
+
+	/* MISC. */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* external power detect */
+	GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,	/* silent switch */
+	GPIO116_GPIO,				/* headphone detect */
+	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* bluetooth host wake up */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int treo680_mci_init(struct device *dev,
+		irq_handler_t treo680_detect_int, void *data)
+{
+	int err = 0;
+
+	/* Setup an interrupt for detecting card insert/remove events */
+	err = gpio_request(GPIO_NR_TREO680_SD_DETECT_N, "SD IRQ");
+
+	if (err)
+		goto err;
+
+	err = gpio_direction_input(GPIO_NR_TREO680_SD_DETECT_N);
+	if (err)
+		goto err2;
+
+	err = request_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N),
+			treo680_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			"SD/MMC card detect", data);
+
+	if (err) {
+		dev_err(dev, "%s: cannot request SD/MMC card detect IRQ\n",
+			     __func__);
+		goto err2;
+	}
+
+	err = gpio_request(GPIO_NR_TREO680_SD_POWER, "SD_POWER");
+	if (err)
+		goto err3;
+
+	err = gpio_direction_output(GPIO_NR_TREO680_SD_POWER, 1);
+	if (err)
+		goto err4;
+
+	err = gpio_request(GPIO_NR_TREO680_SD_READONLY, "SD_READONLY");
+	if (err)
+		goto err4;
+
+	err = gpio_direction_input(GPIO_NR_TREO680_SD_READONLY);
+	if (err)
+		goto err5;
+
+	return 0;
+
+err5:
+	gpio_free(GPIO_NR_TREO680_SD_READONLY);
+err4:
+	gpio_free(GPIO_NR_TREO680_SD_POWER);
+err3:
+	free_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N), data);
+err2:
+	gpio_free(GPIO_NR_TREO680_SD_DETECT_N);
+err:
+	return err;
+}
+
+static void treo680_mci_exit(struct device *dev, void *data)
+{
+	gpio_free(GPIO_NR_TREO680_SD_READONLY);
+	gpio_free(GPIO_NR_TREO680_SD_POWER);
+	free_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N), data);
+	gpio_free(GPIO_NR_TREO680_SD_DETECT_N);
+}
+
+static void treo680_mci_power(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data *p_d = dev->platform_data;
+	gpio_set_value(GPIO_NR_TREO680_SD_POWER, p_d->ocr_mask & (1 << vdd));
+}
+
+static int treo680_mci_get_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO_NR_TREO680_SD_READONLY);
+}
+
+static struct pxamci_platform_data treo680_mci_platform_data = {
+	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.setpower	= treo680_mci_power,
+	.get_ro		= treo680_mci_get_ro,
+	.init 		= treo680_mci_init,
+	.exit		= treo680_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int treo680_matrix_keys[] = {
+	KEY(0, 0, KEY_F8),		/* Red/Off/Power */
+	KEY(0, 1, KEY_LEFT),
+	KEY(0, 2, KEY_LEFTCTRL),	/* Alternate */
+	KEY(0, 3, KEY_L),
+	KEY(0, 4, KEY_A),
+	KEY(0, 5, KEY_Q),
+	KEY(0, 6, KEY_P),
+
+	KEY(1, 0, KEY_RIGHTCTRL),	/* Menu */
+	KEY(1, 1, KEY_RIGHT),
+	KEY(1, 2, KEY_LEFTSHIFT),	/* Left shift */
+	KEY(1, 3, KEY_Z),
+	KEY(1, 4, KEY_S),
+	KEY(1, 5, KEY_W),
+
+	KEY(2, 0, KEY_F1),		/* Phone */
+	KEY(2, 1, KEY_UP),
+	KEY(2, 2, KEY_0),
+	KEY(2, 3, KEY_X),
+	KEY(2, 4, KEY_D),
+	KEY(2, 5, KEY_E),
+
+	KEY(3, 0, KEY_F10),		/* Calendar */
+	KEY(3, 1, KEY_DOWN),
+	KEY(3, 2, KEY_SPACE),
+	KEY(3, 3, KEY_C),
+	KEY(3, 4, KEY_F),
+	KEY(3, 5, KEY_R),
+
+	KEY(4, 0, KEY_F12),		/* Mail */
+	KEY(4, 1, KEY_KPENTER),
+	KEY(4, 2, KEY_RIGHTALT),	/* Alt */
+	KEY(4, 3, KEY_V),
+	KEY(4, 4, KEY_G),
+	KEY(4, 5, KEY_T),
+
+	KEY(5, 0, KEY_F9),		/* Home */
+	KEY(5, 1, KEY_PAGEUP),		/* Side up */
+	KEY(5, 2, KEY_DOT),
+	KEY(5, 3, KEY_B),
+	KEY(5, 4, KEY_H),
+	KEY(5, 5, KEY_Y),
+
+	KEY(6, 0, KEY_TAB),		/* Side Activate */
+	KEY(6, 1, KEY_PAGEDOWN),	/* Side down */
+	KEY(6, 2, KEY_ENTER),
+	KEY(6, 3, KEY_N),
+	KEY(6, 4, KEY_J),
+	KEY(6, 5, KEY_U),
+
+	KEY(7, 0, KEY_F6),		/* Green/Call */
+	KEY(7, 1, KEY_O),
+	KEY(7, 2, KEY_BACKSPACE),
+	KEY(7, 3, KEY_M),
+	KEY(7, 4, KEY_K),
+	KEY(7, 5, KEY_I),
+};
+
+static struct pxa27x_keypad_platform_data treo680_keypad_platform_data = {
+	.matrix_key_rows	= 8,
+	.matrix_key_cols	= 7,
+	.matrix_key_map		= treo680_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(treo680_matrix_keys),
+	.direct_key_map		= { KEY_CONNECT },
+	.direct_key_num		= 1,
+
+	.debounce_interval	= 30,
+};
+
+/******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+
+static pxa2xx_audio_ops_t treo680_ac97_pdata = {
+	.reset_gpio	= 95,
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int treo680_backlight_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_TREO680_BL_POWER, "BL POWER");
+	if (ret)
+		goto err;
+	ret = gpio_direction_output(GPIO_NR_TREO680_BL_POWER, 0);
+	if (ret)
+		goto err2;
+	ret = gpio_request(GPIO_NR_TREO680_LCD_POWER, "LCD POWER");
+	if (ret)
+		goto err2;
+	ret = gpio_direction_output(GPIO_NR_TREO680_LCD_POWER, 0);
+	if (ret)
+		goto err3;
+
+	return 0;
+err3:
+	gpio_free(GPIO_NR_TREO680_LCD_POWER);
+err2:
+	gpio_free(GPIO_NR_TREO680_BL_POWER);
+err:
+	return ret;
+}
+
+static int treo680_backlight_notify(int brightness)
+{
+	gpio_set_value(GPIO_NR_TREO680_BL_POWER, brightness);
+	return TREO680_MAX_INTENSITY - brightness;
+};
+
+static void treo680_backlight_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_TREO680_BL_POWER);
+	gpio_free(GPIO_NR_TREO680_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data treo680_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= TREO680_MAX_INTENSITY,
+	.dft_brightness	= TREO680_DEFAULT_INTENSITY,
+	.pwm_period_ns	= TREO680_PERIOD_NS,
+	.init		= treo680_backlight_init,
+	.notify		= treo680_backlight_notify,
+	.exit		= treo680_backlight_exit,
+};
+
+static struct platform_device treo680_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &treo680_backlight_data,
+	},
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static void treo680_transceiver_mode(struct device *dev, int mode)
+{
+	gpio_set_value(GPIO_NR_TREO680_IR_EN, mode & IR_OFF);
+	pxa2xx_transceiver_mode(dev, mode);
+}
+
+static int treo680_irda_startup(struct device *dev)
+{
+	int err;
+
+	err = gpio_request(GPIO_NR_TREO680_IR_EN, "Ir port disable");
+	if (err)
+		goto err1;
+
+	err = gpio_direction_output(GPIO_NR_TREO680_IR_EN, 1);
+	if (err)
+		goto err2;
+
+	return 0;
+
+err2:
+	dev_err(dev, "treo680_irda: cannot change IR gpio direction\n");
+	gpio_free(GPIO_NR_TREO680_IR_EN);
+err1:
+	dev_err(dev, "treo680_irda: cannot allocate IR gpio\n");
+	return err;
+}
+
+static void treo680_irda_shutdown(struct device *dev)
+{
+	gpio_free(GPIO_NR_TREO680_AMP_EN);
+}
+
+static struct pxaficp_platform_data treo680_ficp_info = {
+	.transceiver_cap  = IR_FIRMODE | IR_SIRMODE | IR_OFF,
+	.startup          = treo680_irda_startup,
+	.shutdown         = treo680_irda_shutdown,
+	.transceiver_mode = treo680_transceiver_mode,
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static struct pxa2xx_udc_mach_info treo680_udc_info __initdata = {
+	.gpio_vbus		= GPIO_NR_TREO680_USB_DETECT,
+	.gpio_vbus_inverted	= 1,
+	.gpio_pullup		= GPIO_NR_TREO680_USB_PULLUP,
+};
+
+
+/******************************************************************************
+ * USB host
+ ******************************************************************************/
+static struct pxaohci_platform_data treo680_ohci_info = {
+	.port_mode    = PMM_PERPORT_MODE,
+	.flags        = ENABLE_PORT1 | ENABLE_PORT3,
+	.power_budget = 0,
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_TREO680_POWER_DETECT, "CABLE_STATE_AC");
+	if (ret)
+		goto err1;
+	ret = gpio_direction_input(GPIO_NR_TREO680_POWER_DETECT);
+	if (ret)
+		goto err2;
+
+	return 0;
+
+err2:
+	gpio_free(GPIO_NR_TREO680_POWER_DETECT);
+err1:
+	return ret;
+}
+
+static int treo680_is_ac_online(void)
+{
+	return gpio_get_value(GPIO_NR_TREO680_POWER_DETECT);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_TREO680_POWER_DETECT);
+}
+
+static char *treo680_supplicants[] = {
+	"main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+	.init		 = power_supply_init,
+	.is_ac_online    = treo680_is_ac_online,
+	.exit		 = power_supply_exit,
+	.supplied_to     = treo680_supplicants,
+	.num_supplicants = ARRAY_SIZE(treo680_supplicants),
+};
+
+static struct platform_device power_supply = {
+	.name = "pda-power",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &power_supply_info,
+	},
+};
+
+/******************************************************************************
+ * Vibra and LEDs
+ ******************************************************************************/
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "treo680:vibra:vibra",
+		.default_trigger	= "none",
+		.gpio			= GPIO_NR_TREO680_VIBRATE_EN,
+	},
+	{
+		.name			= "treo680:green:led",
+		.default_trigger	= "mmc0",
+		.gpio			= GPIO_NR_TREO680_GREEN_LED,
+	},
+	{
+		.name			= "treo680:keybbl:keybbl",
+		.default_trigger	= "none",
+		.gpio			= GPIO_NR_TREO680_KEYB_BL,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device treo680_leds = {
+	.name   = "leds-gpio",
+	.id     = -1,
+	.dev    = {
+		.platform_data  = &gpio_led_info,
+	}
+};
+
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+/* TODO: add support for 324x324 */
+static struct pxafb_mode_info treo680_lcd_modes[] = {
+{
+	.pixclock		= 86538,
+	.xres			= 320,
+	.yres			= 320,
+	.bpp			= 16,
+
+	.left_margin		= 20,
+	.right_margin		= 8,
+	.upper_margin		= 8,
+	.lower_margin		= 5,
+
+	.hsync_len		= 4,
+	.vsync_len		= 1,
+},
+};
+
+static struct pxafb_mach_info treo680_lcd_screen = {
+	.modes		= treo680_lcd_modes,
+	.num_modes	= ARRAY_SIZE(treo680_lcd_modes),
+	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Power management - standby
+ ******************************************************************************/
+static void __init treo680_pm_init(void)
+{
+	static u32 resume[] = {
+		0xe3a00101,	/* mov	r0,	#0x40000000 */
+		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
+		0xe590f008,	/* ldr	pc, [r0, #0x08] */
+	};
+
+	/* this is where the bootloader jumps */
+	memcpy(phys_to_virt(TREO680_STR_BASE), resume, sizeof(resume));
+}
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+	&treo680_backlight,
+	&treo680_leds,
+	&power_supply,
+};
+
+/* setup udc GPIOs initial state */
+static void __init treo680_udc_init(void)
+{
+	if (!gpio_request(GPIO_NR_TREO680_USB_PULLUP, "UDC Vbus")) {
+		gpio_direction_output(GPIO_NR_TREO680_USB_PULLUP, 1);
+		gpio_free(GPIO_NR_TREO680_USB_PULLUP);
+	}
+}
+
+static void __init treo680_init(void)
+{
+	treo680_pm_init();
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
+	pxa_set_keypad_info(&treo680_keypad_platform_data);
+	set_pxa_fb_info(&treo680_lcd_screen);
+	pxa_set_mci_info(&treo680_mci_platform_data);
+	treo680_udc_init();
+	pxa_set_udc_info(&treo680_udc_info);
+	pxa_set_ac97_info(&treo680_ac97_pdata);
+	pxa_set_ficp_info(&treo680_ficp_info);
+	pxa_set_ohci_info(&treo680_ohci_info);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(TREO680, "Palm Treo 680")
+	.phys_io	= TREO680_PHYS_IO_START,
+	.io_pg_offst	= io_p2v(0x40000000),
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= treo680_init,
+MACHINE_END
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 1fe294d0bf9..ede2a57240a 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -27,6 +27,7 @@
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
+#include <asm/smp_twd.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 6cd9377ddb8..50e25fc5f8a 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -22,7 +22,6 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/device.h>
-#include <linux/gpio.h>
 #include <linux/io.h>
 
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 5df73cbf2b4..8cfeaec3730 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -84,5 +84,15 @@ config MACH_AT2440EVB
 	help
 	  Say Y here if you are using the AT2440EVB development board
 
+config MACH_MINI2440
+	bool "MINI2440 development board"
+	select CPU_S3C2440
+	select EEPROM_AT24
+	select LEDS_TRIGGER_BACKLIGHT
+	select SND_S3C24XX_SOC_S3C24XX_UDA134X
+	help
+	  Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
+	  available via various sources. It can come with a 3.5" or 7" touch LCD.
+
 endmenu
 
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
index 0b4440e79b9..bfadcf684a2 100644
--- a/arch/arm/mach-s3c2440/Makefile
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -22,3 +22,4 @@ obj-$(CONFIG_MACH_RX3715)	+= mach-rx3715.o
 obj-$(CONFIG_ARCH_S3C2440)	+= mach-smdk2440.o
 obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
 obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
+obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
new file mode 100644
index 00000000000..6a5bc3021bd
--- /dev/null
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -0,0 +1,703 @@
+/* linux/arch/arm/mach-s3c2440/mach-mini2440.c
+ *
+ * Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com>
+ *      Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk>
+ *      and modifications by SBZ <sbz@spgui.org> and
+ *      Weibing <http://weibing.blogbus.com> and
+ *      Michel Pollet <buserror@gmail.com>
+ *
+ * For product information, visit http://code.google.com/p/mini2440/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/serial_core.h>
+#include <linux/dm9000.h>
+#include <linux/i2c/at24.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
+#include <linux/mmc/host.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/fb.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+#include <mach/leds-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/irqs.h>
+#include <plat/nand.h>
+#include <plat/iic.h>
+#include <plat/mci.h>
+#include <plat/udc.h>
+
+#include <plat/regs-serial.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#include <sound/s3c24xx_uda134x.h>
+
+#define MACH_MINI2440_DM9K_BASE (S3C2410_CS4 + 0x300)
+
+static struct map_desc mini2440_iodesc[] __initdata = {
+	/* nothing to declare, move along */
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+
+static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+};
+
+/* USB device UDC support */
+
+static void mini2440_udc_pullup(enum s3c2410_udc_cmd_e cmd)
+{
+	pr_debug("udc: pullup(%d)\n", cmd);
+
+	switch (cmd) {
+		case S3C2410_UDC_P_ENABLE :
+			s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
+			break;
+		case S3C2410_UDC_P_DISABLE :
+			s3c2410_gpio_setpin(S3C2410_GPC(5), 0);
+			break;
+		case S3C2410_UDC_P_RESET :
+			break;
+		default:
+			break;
+	}
+}
+
+static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
+	.udc_command		= mini2440_udc_pullup,
+};
+
+
+/* LCD timing and setup */
+
+/*
+ * This macro simplifies the table bellow
+ */
+#define _LCD_DECLARE(_clock,_xres,margin_left,margin_right,hsync, \
+			_yres,margin_top,margin_bottom,vsync, refresh) \
+	.width = _xres, \
+	.xres = _xres, \
+	.height = _yres, \
+	.yres = _yres, \
+	.left_margin	= margin_left,	\
+	.right_margin	= margin_right,	\
+	.upper_margin	= margin_top,	\
+	.lower_margin	= margin_bottom,	\
+	.hsync_len	= hsync,	\
+	.vsync_len	= vsync,	\
+	.pixclock	= ((_clock*100000000000LL) /	\
+			   ((refresh) * \
+			   (hsync + margin_left + _xres + margin_right) * \
+			   (vsync + margin_top + _yres + margin_bottom))), \
+	.bpp		= 16,\
+	.type		= (S3C2410_LCDCON1_TFT16BPP |\
+			   S3C2410_LCDCON1_TFT)
+
+struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
+	[0] = {	/* mini2440 + 3.5" TFT + touchscreen */
+		_LCD_DECLARE(
+			7,			/* The 3.5 is quite fast */
+			240, 21, 38, 6, 	/* x timing */
+			320, 4, 4, 2,		/* y timing */
+			60),			/* refresh rate */
+		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
+				   S3C2410_LCDCON5_INVVLINE |
+				   S3C2410_LCDCON5_INVVFRAME |
+				   S3C2410_LCDCON5_INVVDEN |
+				   S3C2410_LCDCON5_PWREN),
+	},
+	[1] = { /* mini2440 + 7" TFT + touchscreen */
+		_LCD_DECLARE(
+			10,			/* the 7" runs slower */
+			800, 40, 40, 48, 	/* x timing */
+			480, 29, 3, 3,		/* y timing */
+			50),			/* refresh rate */
+		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
+				   S3C2410_LCDCON5_INVVLINE |
+				   S3C2410_LCDCON5_INVVFRAME |
+				   S3C2410_LCDCON5_PWREN),
+	},
+	/* The VGA shield can outout at several resolutions. All share 
+	 * the same timings, however, anything smaller than 1024x768
+	 * will only be displayed in the top left corner of a 1024x768
+	 * XGA output unless you add optional dip switches to the shield.
+	 * Therefore timings for other resolutions have been ommited here.
+	 */
+	[2] = {
+		_LCD_DECLARE(
+			10,
+			1024, 1, 2, 2,		/* y timing */
+			768, 200, 16, 16, 	/* x timing */
+			24),	/* refresh rate, maximum stable,
+				 tested with the FPGA shield */
+		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
+				   S3C2410_LCDCON5_HWSWP),
+	},
+};
+
+/* todo - put into gpio header */
+
+#define S3C2410_GPCCON_MASK(x)	(3 << ((x) * 2))
+#define S3C2410_GPDCON_MASK(x)	(3 << ((x) * 2))
+
+struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
+	.displays	 = &mini2440_lcd_cfg[0], /* not constant! see init */
+	.num_displays	 = 1,
+	.default_display = 0,
+
+	/* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
+	 * and disable the pull down resistors on pins we are using for LCD
+	 * data. */
+
+	.gpcup		= (0xf << 1) | (0x3f << 10),
+
+	.gpccon		= (S3C2410_GPC1_VCLK   | S3C2410_GPC2_VLINE |
+			   S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
+			   S3C2410_GPC10_VD2   | S3C2410_GPC11_VD3 |
+			   S3C2410_GPC12_VD4   | S3C2410_GPC13_VD5 |
+			   S3C2410_GPC14_VD6   | S3C2410_GPC15_VD7),
+
+	.gpccon_mask	= (S3C2410_GPCCON_MASK(1)  | S3C2410_GPCCON_MASK(2)  |
+			   S3C2410_GPCCON_MASK(3)  | S3C2410_GPCCON_MASK(4)  |
+			   S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) |
+			   S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
+			   S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
+
+	.gpdup		= (0x3f << 2) | (0x3f << 10),
+
+	.gpdcon		= (S3C2410_GPD2_VD10  | S3C2410_GPD3_VD11 |
+			   S3C2410_GPD4_VD12  | S3C2410_GPD5_VD13 |
+			   S3C2410_GPD6_VD14  | S3C2410_GPD7_VD15 |
+			   S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 |
+			   S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 |
+			   S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23),
+
+	.gpdcon_mask	= (S3C2410_GPDCON_MASK(2)  | S3C2410_GPDCON_MASK(3) |
+			   S3C2410_GPDCON_MASK(4)  | S3C2410_GPDCON_MASK(5) |
+			   S3C2410_GPDCON_MASK(6)  | S3C2410_GPDCON_MASK(7) |
+			   S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
+			   S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
+			   S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
+};
+
+/* MMC/SD  */
+
+static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = {
+   .gpio_detect   = S3C2410_GPG(8),
+   .gpio_wprotect = S3C2410_GPH(8),
+   .set_power     = NULL,
+   .ocr_avail     = MMC_VDD_32_33|MMC_VDD_33_34,
+};
+
+/* NAND Flash on MINI2440 board */
+
+static struct mtd_partition mini2440_default_nand_part[] __initdata = {
+	[0] = {
+		.name	= "u-boot",
+		.size	= SZ_256K,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "u-boot-env",
+		.size	= SZ_128K,
+		.offset	= SZ_256K,
+	},
+	[2] = {
+		.name	= "kernel",
+		/* 5 megabytes, for a kernel with no modules
+		 * or a uImage with a ramdisk attached */
+		.size	= 0x00500000,
+		.offset	= SZ_256K + SZ_128K,
+	},
+	[3] = {
+		.name	= "root",
+		.offset	= SZ_256K + SZ_128K + 0x00500000,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = {
+	[0] = {
+		.name		= "nand",
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(mini2440_default_nand_part),
+		.partitions	= mini2440_default_nand_part,
+	},
+};
+
+static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
+	.tacls		= 0,
+	.twrph0		= 25,
+	.twrph1		= 15,
+	.nr_sets	= ARRAY_SIZE(mini2440_nand_sets),
+	.sets		= mini2440_nand_sets,
+	.ignore_unset_ecc = 1,
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+
+static struct resource mini2440_dm9k_resource[] __initdata = {
+	[0] = {
+		.start = MACH_MINI2440_DM9K_BASE,
+		.end   = MACH_MINI2440_DM9K_BASE + 3,
+		.flags = IORESOURCE_MEM
+	},
+	[1] = {
+		.start = MACH_MINI2440_DM9K_BASE + 4,
+		.end   = MACH_MINI2440_DM9K_BASE + 7,
+		.flags = IORESOURCE_MEM
+	},
+	[2] = {
+		.start = IRQ_EINT7,
+		.end   = IRQ_EINT7,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+/*
+ * The DM9000 has no eeprom, and it's MAC address is set by
+ * the bootloader before starting the kernel.
+ */
+static struct dm9000_plat_data mini2440_dm9k_pdata __initdata = {
+	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+};
+
+static struct platform_device mini2440_device_eth __initdata = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(mini2440_dm9k_resource),
+	.resource	= mini2440_dm9k_resource,
+	.dev		= {
+		.platform_data	= &mini2440_dm9k_pdata,
+	},
+};
+
+/*  CON5
+ *	+--+	 /-----\
+ *	|  |    |	|
+ *	|  |	|  BAT	|
+ *	|  |	 \_____/
+ *	|  |
+ *	|  |  +----+  +----+
+ *	|  |  | K5 |  | K1 |
+ *	|  |  +----+  +----+
+ *	|  |  +----+  +----+
+ *	|  |  | K4 |  | K2 |
+ *	|  |  +----+  +----+
+ *	|  |  +----+  +----+
+ *	|  |  | K6 |  | K3 |
+ *	|  |  +----+  +----+
+ *	  .....
+ */
+static struct gpio_keys_button mini2440_buttons[] __initdata = {
+	{
+		.gpio		= S3C2410_GPG(0),		/* K1 */
+		.code		= KEY_F1,
+		.desc		= "Button 1",
+		.active_low	= 1,
+	},
+	{
+		.gpio		= S3C2410_GPG(3),		/* K2 */
+		.code		= KEY_F2,
+		.desc		= "Button 2",
+		.active_low	= 1,
+	},
+	{
+		.gpio		= S3C2410_GPG(5),		/* K3 */
+		.code		= KEY_F3,
+		.desc		= "Button 3",
+		.active_low	= 1,
+	},
+	{
+		.gpio		= S3C2410_GPG(6),		/* K4 */
+		.code		= KEY_POWER,
+		.desc		= "Power",
+		.active_low	= 1,
+	},
+	{
+		.gpio		= S3C2410_GPG(7),		/* K5 */
+		.code		= KEY_F5,
+		.desc		= "Button 5",
+		.active_low	= 1,
+	},
+#if 0
+	/* this pin is also known as TCLK1 and seems to already
+	 * marked as "in use" somehow in the kernel -- possibly wrongly */
+	{
+		.gpio		= S3C2410_GPG(11),	/* K6 */
+		.code		= KEY_F6,
+		.desc		= "Button 6",
+		.active_low	= 1,
+	},
+#endif
+};
+
+static struct gpio_keys_platform_data mini2440_button_data __initdata = {
+	.buttons	= mini2440_buttons,
+	.nbuttons	= ARRAY_SIZE(mini2440_buttons),
+};
+
+static struct platform_device mini2440_button_device __initdata = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &mini2440_button_data,
+	}
+};
+
+/* LEDS */
+
+static struct s3c24xx_led_platdata mini2440_led1_pdata __initdata = {
+	.name		= "led1",
+	.gpio		= S3C2410_GPB(5),
+	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+	.def_trigger	= "heartbeat",
+};
+
+static struct s3c24xx_led_platdata mini2440_led2_pdata __initdata = {
+	.name		= "led2",
+	.gpio		= S3C2410_GPB(6),
+	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+	.def_trigger	= "nand-disk",
+};
+
+static struct s3c24xx_led_platdata mini2440_led3_pdata __initdata = {
+	.name		= "led3",
+	.gpio		= S3C2410_GPB(7),
+	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+	.def_trigger	= "mmc0",
+};
+
+static struct s3c24xx_led_platdata mini2440_led4_pdata __initdata = {
+	.name		= "led4",
+	.gpio		= S3C2410_GPB(8),
+	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+	.def_trigger	= "",
+};
+
+static struct s3c24xx_led_platdata mini2440_led_backlight_pdata __initdata = {
+	.name		= "backlight",
+	.gpio		= S3C2410_GPG(4),
+	.def_trigger	= "backlight",
+};
+
+static struct platform_device mini2440_led1 __initdata = {
+	.name		= "s3c24xx_led",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &mini2440_led1_pdata,
+	},
+};
+
+static struct platform_device mini2440_led2 __initdata = {
+	.name		= "s3c24xx_led",
+	.id		= 2,
+	.dev		= {
+		.platform_data	= &mini2440_led2_pdata,
+	},
+};
+
+static struct platform_device mini2440_led3 __initdata = {
+	.name		= "s3c24xx_led",
+	.id		= 3,
+	.dev		= {
+		.platform_data	= &mini2440_led3_pdata,
+	},
+};
+
+static struct platform_device mini2440_led4 __initdata = {
+	.name		= "s3c24xx_led",
+	.id		= 4,
+	.dev		= {
+		.platform_data	= &mini2440_led4_pdata,
+	},
+};
+
+static struct platform_device mini2440_led_backlight __initdata = {
+	.name		= "s3c24xx_led",
+	.id		= 5,
+	.dev		= {
+		.platform_data	= &mini2440_led_backlight_pdata,
+	},
+};
+
+/* AUDIO */
+
+static struct s3c24xx_uda134x_platform_data mini2440_audio_pins __initdata = {
+	.l3_clk = S3C2410_GPB(4),
+	.l3_mode = S3C2410_GPB(2),
+	.l3_data = S3C2410_GPB(3),
+	.model = UDA134X_UDA1341
+};
+
+static struct platform_device mini2440_audio __initdata = {
+	.name		= "s3c24xx_uda134x",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &mini2440_audio_pins,
+	},
+};
+
+/*
+ * I2C devices
+ */
+static struct at24_platform_data at24c08 = {
+	.byte_len	= SZ_8K / 8,
+	.page_size	= 16,
+};
+
+static struct i2c_board_info mini2440_i2c_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("24c08", 0x50),
+		.platform_data = &at24c08,
+	},
+};
+
+static struct platform_device *mini2440_devices[] __initdata = {
+	&s3c_device_usb,
+	&s3c_device_wdt,
+/*	&s3c_device_adc,*/ /* ADC doesn't like living with touchscreen ! */
+	&s3c_device_i2c0,
+	&s3c_device_rtc,
+	&s3c_device_usbgadget,
+	&mini2440_device_eth,
+	&mini2440_led1,
+	&mini2440_led2,
+	&mini2440_led3,
+	&mini2440_led4,
+	&mini2440_button_device,
+	&s3c_device_nand,
+	&s3c_device_sdi,
+	&s3c_device_iis,
+	&mini2440_audio,
+/*	&s3c_device_timer[0],*/	/* buzzer pwm, no API for it */
+	/* remaining devices are optional */
+};
+
+static void __init mini2440_map_io(void)
+{
+	s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
+
+	s3c_device_nand.dev.platform_data = &mini2440_nand_info;
+	s3c_device_sdi.dev.platform_data = &mini2440_mmc_cfg;
+}
+
+/*
+ * mini2440_features string
+ *
+ * t = Touchscreen present
+ * b = backlight control
+ * c = camera [TODO]
+ * 0-9 LCD configuration
+ *
+ */
+static char mini2440_features_str[12] __initdata = "0tb";
+
+static int __init mini2440_features_setup(char *str)
+{
+	if (str)
+		strlcpy(mini2440_features_str, str, sizeof(mini2440_features_str));
+	return 1;
+}
+
+__setup("mini2440=", mini2440_features_setup);
+
+#define FEATURE_SCREEN (1 << 0)
+#define FEATURE_BACKLIGHT (1 << 1)
+#define FEATURE_TOUCH (1 << 2)
+#define FEATURE_CAMERA (1 << 3)
+
+struct mini2440_features_t {
+	int count;
+	int done;
+	int lcd_index;
+	struct platform_device *optional[8];
+};
+
+static void mini2440_parse_features(
+		struct mini2440_features_t * features,
+		const char * features_str )
+{
+	const char * fp = features_str;
+
+	features->count = 0;
+	features->done = 0;
+	features->lcd_index = -1;
+
+	while (*fp) {
+		char f = *fp++;
+
+		switch (f) {
+		case '0'...'9':	/* tft screen */
+			if (features->done & FEATURE_SCREEN) {
+				printk(KERN_INFO "MINI2440: '%c' ignored, "
+					"screen type already set\n", f);
+			} else {
+				int li = f - '0';
+				if (li >= ARRAY_SIZE(mini2440_lcd_cfg))
+					printk(KERN_INFO "MINI2440: "
+						"'%c' out of range LCD mode\n", f);
+				else {
+					features->optional[features->count++] =
+							&s3c_device_lcd;
+					features->lcd_index = li;
+				}
+			}
+			features->done |= FEATURE_SCREEN;
+			break;
+		case 'b':
+			if (features->done & FEATURE_BACKLIGHT)
+				printk(KERN_INFO "MINI2440: '%c' ignored, "
+					"backlight already set\n", f);
+			else {
+				features->optional[features->count++] =
+						&mini2440_led_backlight;
+			}
+			features->done |= FEATURE_BACKLIGHT;
+			break;
+		case 't':
+			printk(KERN_INFO "MINI2440: '%c' ignored, "
+				"touchscreen not compiled in\n", f);
+			break;
+		case 'c':
+			if (features->done & FEATURE_CAMERA)
+				printk(KERN_INFO "MINI2440: '%c' ignored, "
+					"camera already registered\n", f);
+			else
+				features->optional[features->count++] =
+					&s3c_device_camif;
+			features->done |= FEATURE_CAMERA;
+			break;
+		}
+	}
+}
+
+static void __init mini2440_init(void)
+{
+	struct mini2440_features_t features = { 0 };
+	int i;
+
+	printk(KERN_INFO "MINI2440: Option string mini2440=%s\n",
+			mini2440_features_str);
+
+	/* Parse the feature string */
+	mini2440_parse_features(&features, mini2440_features_str);
+
+	/* turn LCD on */
+	s3c2410_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND);
+
+	/* Turn the backlight early on */
+	s3c2410_gpio_setpin(S3C2410_GPG(4), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(4), S3C2410_GPIO_OUTPUT);
+
+	/* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */
+	s3c2410_gpio_pullup(S3C2410_GPB(1), 0);
+	s3c2410_gpio_setpin(S3C2410_GPB(1), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT);
+
+	/* Make sure the D+ pullup pin is output */
+	s3c2410_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
+
+	/* mark the key as input, without pullups (there is one on the board) */
+	for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) {
+		s3c2410_gpio_pullup(mini2440_buttons[i].gpio, 0);
+		s3c2410_gpio_cfgpin(mini2440_buttons[i].gpio,
+					S3C2410_GPIO_INPUT);
+	}
+	if (features.lcd_index != -1) {
+		int li;
+
+		mini2440_fb_info.displays =
+			&mini2440_lcd_cfg[features.lcd_index];
+
+		printk(KERN_INFO "MINI2440: LCD");
+		for (li = 0; li < ARRAY_SIZE(mini2440_lcd_cfg); li++)
+			if (li == features.lcd_index)
+				printk(" [%d:%dx%d]", li,
+					mini2440_lcd_cfg[li].width,
+					mini2440_lcd_cfg[li].height);
+			else
+				printk(" %d:%dx%d", li,
+					mini2440_lcd_cfg[li].width,
+					mini2440_lcd_cfg[li].height);
+		printk("\n");
+		s3c24xx_fb_set_platdata(&mini2440_fb_info);
+	}
+	s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
+	s3c_i2c0_set_platdata(NULL);
+	i2c_register_board_info(0, mini2440_i2c_devs,
+				ARRAY_SIZE(mini2440_i2c_devs));
+
+	platform_add_devices(mini2440_devices, ARRAY_SIZE(mini2440_devices));
+
+	if (features.count)	/* the optional features */
+		platform_add_devices(features.optional, features.count);
+
+}
+
+
+MACHINE_START(MINI2440, "MINI2440")
+	/* Maintainer: Michel Pollet <buserror@gmail.com> */
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.map_io		= mini2440_map_io,
+	.init_machine	= mini2440_init,
+	.init_irq	= s3c24xx_init_irq,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig
index b289d198020..103e913f225 100644
--- a/arch/arm/mach-s3c2442/Kconfig
+++ b/arch/arm/mach-s3c2442/Kconfig
@@ -24,6 +24,18 @@ config SMDK2440_CPU2442
 	depends on ARCH_S3C2440
 	select CPU_S3C2442
 
+config MACH_NEO1973_GTA02
+	bool "Openmoko GTA02 / Freerunner phone"
+	select CPU_S3C2442
+	select MFD_PCF50633
+	select PCF50633_GPIO
+	select I2C
+	select POWER_SUPPLY
+	select MACH_NEO1973
+	select S3C2410_PWM
+	help
+	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
+
 
 endmenu
 
diff --git a/arch/arm/mach-s3c2442/Makefile b/arch/arm/mach-s3c2442/Makefile
index 2a909c6c579..2a19113a576 100644
--- a/arch/arm/mach-s3c2442/Makefile
+++ b/arch/arm/mach-s3c2442/Makefile
@@ -12,5 +12,7 @@ obj-				:=
 obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
 obj-$(CONFIG_CPU_S3C2442)	+= clock.o
 
+obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
+
 # Machine support
 
diff --git a/arch/arm/mach-s3c2442/include/mach/gta02.h b/arch/arm/mach-s3c2442/include/mach/gta02.h
new file mode 100644
index 00000000000..953331d8d56
--- /dev/null
+++ b/arch/arm/mach-s3c2442/include/mach/gta02.h
@@ -0,0 +1,84 @@
+#ifndef _GTA02_H
+#define _GTA02_H
+
+#include <mach/regs-gpio.h>
+
+/* Different hardware revisions, passed in ATAG_REVISION by u-boot */
+#define GTA02v1_SYSTEM_REV	0x00000310
+#define GTA02v2_SYSTEM_REV	0x00000320
+#define GTA02v3_SYSTEM_REV	0x00000330
+#define GTA02v4_SYSTEM_REV	0x00000340
+#define GTA02v5_SYSTEM_REV	0x00000350
+/* since A7 is basically same as A6, we use A6 PCB ID */
+#define GTA02v6_SYSTEM_REV	0x00000360
+
+#define GTA02_GPIO_n3DL_GSM	S3C2410_GPA(13)	/* v1 + v2 + v3 only */
+
+#define GTA02_GPIO_PWR_LED1	S3C2410_GPB(0)
+#define GTA02_GPIO_PWR_LED2	S3C2410_GPB(1)
+#define GTA02_GPIO_AUX_LED	S3C2410_GPB(2)
+#define GTA02_GPIO_VIBRATOR_ON	S3C2410_GPB(3)
+#define GTA02_GPIO_MODEM_RST	S3C2410_GPB(5)
+#define GTA02_GPIO_BT_EN	S3C2410_GPB(6)
+#define GTA02_GPIO_MODEM_ON	S3C2410_GPB(7)
+#define GTA02_GPIO_EXTINT8	S3C2410_GPB(8)
+#define GTA02_GPIO_USB_PULLUP	S3C2410_GPB(9)
+
+#define GTA02_GPIO_PIO5		S3C2410_GPC(5)	/* v3 + v4 only */
+
+#define GTA02v3_GPIO_nG1_CS	S3C2410_GPD(12)	/* v3 + v4 only */
+#define GTA02v3_GPIO_nG2_CS	S3C2410_GPD(13)	/* v3 + v4 only */
+#define GTA02v5_GPIO_HDQ	S3C2410_GPD(14)   /* v5 + */
+
+#define GTA02_GPIO_nG1_INT	S3C2410_GPF(0)
+#define GTA02_GPIO_IO1		S3C2410_GPF(1)
+#define GTA02_GPIO_PIO_2	S3C2410_GPF(2)	/* v2 + v3 + v4 only */
+#define GTA02_GPIO_JACK_INSERT	S3C2410_GPF(4)
+#define GTA02_GPIO_WLAN_GPIO1	S3C2410_GPF(5)	/* v2 + v3 + v4 only */
+#define GTA02_GPIO_AUX_KEY	S3C2410_GPF(6)
+#define GTA02_GPIO_HOLD_KEY	S3C2410_GPF(7)
+
+#define GTA02_GPIO_3D_IRQ	S3C2410_GPG(4)
+#define GTA02v2_GPIO_nG2_INT	S3C2410_GPG(8)	/* v2 + v3 + v4 only */
+#define GTA02v3_GPIO_nUSB_OC	S3C2410_GPG(9)	/* v3 + v4 only */
+#define GTA02v3_GPIO_nUSB_FLT	S3C2410_GPG(10)	/* v3 + v4 only */
+#define GTA02v3_GPIO_nGSM_OC	S3C2410_GPG(11)	/* v3 + v4 only */
+
+#define GTA02_GPIO_AMP_SHUT	S3C2440_GPJ1	/* v2 + v3 + v4 only */
+#define GTA02v1_GPIO_WLAN_GPIO10	S3C2440_GPJ2
+#define GTA02_GPIO_HP_IN	S3C2440_GPJ2	/* v2 + v3 + v4 only */
+#define GTA02_GPIO_INT0		S3C2440_GPJ3	/* v2 + v3 + v4 only */
+#define GTA02_GPIO_nGSM_EN	S3C2440_GPJ4
+#define GTA02_GPIO_3D_RESET	S3C2440_GPJ5
+#define GTA02_GPIO_nDL_GSM	S3C2440_GPJ6	/* v4 + v5 only */
+#define GTA02_GPIO_WLAN_GPIO0	S3C2440_GPJ7
+#define GTA02v1_GPIO_BAT_ID	S3C2440_GPJ8
+#define GTA02_GPIO_KEEPACT	S3C2440_GPJ8
+#define GTA02v1_GPIO_HP_IN	S3C2440_GPJ10
+#define GTA02_CHIP_PWD		S3C2440_GPJ11	/* v2 + v3 + v4 only */
+#define GTA02_GPIO_nWLAN_RESET	S3C2440_GPJ12	/* v2 + v3 + v4 only */
+
+#define GTA02_IRQ_GSENSOR_1	IRQ_EINT0
+#define GTA02_IRQ_MODEM		IRQ_EINT1
+#define GTA02_IRQ_PIO_2		IRQ_EINT2	/* v2 + v3 + v4 only */
+#define GTA02_IRQ_nJACK_INSERT	IRQ_EINT4
+#define GTA02_IRQ_WLAN_GPIO1	IRQ_EINT5
+#define GTA02_IRQ_AUX		IRQ_EINT6
+#define GTA02_IRQ_nHOLD		IRQ_EINT7
+#define GTA02_IRQ_PCF50633	IRQ_EINT9
+#define GTA02_IRQ_3D		IRQ_EINT12
+#define GTA02_IRQ_GSENSOR_2	IRQ_EINT16	/* v2 + v3 + v4 only */
+#define GTA02v3_IRQ_nUSB_OC	IRQ_EINT17	/* v3 + v4 only */
+#define GTA02v3_IRQ_nUSB_FLT	IRQ_EINT18	/* v3 + v4 only */
+#define GTA02v3_IRQ_nGSM_OC	IRQ_EINT19	/* v3 + v4 only */
+
+/* returns 00 000 on GTA02 A5 and earlier, A6 returns 01 001 */
+#define GTA02_PCB_ID1_0		S3C2410_GPC(13)
+#define GTA02_PCB_ID1_1		S3C2410_GPC(15)
+#define GTA02_PCB_ID1_2		S3C2410_GPD(0)
+#define GTA02_PCB_ID2_0		S3C2410_GPD(3)
+#define GTA02_PCB_ID2_1		S3C2410_GPD(4)
+
+int gta02_get_pcb_revision(void);
+
+#endif /* _GTA02_H */
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
new file mode 100644
index 00000000000..e23b581aa0e
--- /dev/null
+++ b/arch/arm/mach-s3c2442/mach-gta02.c
@@ -0,0 +1,646 @@
+/*
+ * linux/arch/arm/mach-s3c2442/mach-gta02.c
+ *
+ * S3C2442 Machine Support for Openmoko GTA02 / FreeRunner.
+ *
+ * Copyright (C) 2006-2009 by Openmoko, Inc.
+ * Authors: Harald Welte <laforge@openmoko.org>
+ *          Andy Green <andy@openmoko.org>
+ *          Werner Almesberger <werner@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/spi/spi.h>
+
+#include <linux/mmc/host.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+
+#include <linux/i2c.h>
+#include <linux/backlight.h>
+#include <linux/regulator/machine.h>
+
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/mbc.h>
+#include <linux/mfd/pcf50633/adc.h>
+#include <linux/mfd/pcf50633/gpio.h>
+#include <linux/mfd/pcf50633/pmic.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/fb.h>
+
+#include <mach/spi.h>
+#include <mach/spi-gpio.h>
+#include <plat/usb-control.h>
+#include <mach/regs-mem.h>
+#include <mach/hardware.h>
+
+#include <mach/gta02.h>
+
+#include <plat/regs-serial.h>
+#include <plat/nand.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/udc.h>
+#include <plat/gpio-cfg.h>
+#include <plat/iic.h>
+
+static struct pcf50633 *gta02_pcf;
+
+/*
+ * This gets called every 1ms when we paniced.
+ */
+
+static long gta02_panic_blink(long count)
+{
+	long delay = 0;
+	static long last_blink;
+	static char led;
+
+	/* Fast blink: 200ms period. */
+	if (count - last_blink < 100)
+		return 0;
+
+	led ^= 1;
+	gpio_direction_output(GTA02_GPIO_AUX_LED, led);
+
+	last_blink = count;
+
+	return delay;
+}
+
+
+static struct map_desc gta02_iodesc[] __initdata = {
+	{
+		.virtual	= 0xe0000000,
+		.pfn		= __phys_to_pfn(S3C2410_CS3 + 0x01000000),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE
+	},
+};
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2443_UCON_RXERR_IRQEN)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg gta02_uartcfgs[] = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= UCON,
+		.ulcon		= ULCON,
+		.ufcon		= UFCON,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= UCON,
+		.ulcon		= ULCON,
+		.ufcon		= UFCON,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= UCON,
+		.ulcon		= ULCON,
+		.ufcon		= UFCON,
+	},
+};
+
+#ifdef CONFIG_CHARGER_PCF50633
+/*
+ * On GTA02 the 1A charger features a 48K resistor to 0V on the ID pin.
+ * We use this to recognize that we can pull 1A from the USB socket.
+ *
+ * These constants are the measured pcf50633 ADC levels with the 1A
+ * charger / 48K resistor, and with no pulldown resistor.
+ */
+
+#define ADC_NOM_CHG_DETECT_1A 6
+#define ADC_NOM_CHG_DETECT_USB 43
+
+static void
+gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
+{
+	int  ma;
+
+	/* Interpret charger type */
+	if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) {
+
+		/*
+		 * Sanity - stop GPO driving out now that we have a 1A charger
+		 * GPO controls USB Host power generation on GTA02
+		 */
+		pcf50633_gpio_set(pcf, PCF50633_GPO, 0);
+
+		ma = 1000;
+	} else
+		ma = 100;
+
+	pcf50633_mbc_usb_curlim_set(pcf, ma);
+}
+
+static struct delayed_work gta02_charger_work;
+static int gta02_usb_vbus_draw;
+
+static void gta02_charger_worker(struct work_struct *work)
+{
+	if (gta02_usb_vbus_draw) {
+		pcf50633_mbc_usb_curlim_set(gta02_pcf, gta02_usb_vbus_draw);
+		return;
+	}
+
+#ifdef CONFIG_PCF50633_ADC
+	pcf50633_adc_async_read(gta02_pcf,
+				PCF50633_ADCC1_MUX_ADCIN1,
+				PCF50633_ADCC1_AVERAGE_16,
+				gta02_configure_pmu_for_charger,
+				NULL);
+#else
+	/*
+	 * If the PCF50633 ADC is disabled we fallback to a
+	 * 100mA limit for safety.
+	 */
+	pcf50633_mbc_usb_curlim_set(pcf, 100);
+#endif
+}
+
+#define GTA02_CHARGER_CONFIGURE_TIMEOUT ((3000 * HZ) / 1000)
+
+static void gta02_pmu_event_callback(struct pcf50633 *pcf, int irq)
+{
+	if (irq == PCF50633_IRQ_USBINS) {
+		schedule_delayed_work(&gta02_charger_work,
+				      GTA02_CHARGER_CONFIGURE_TIMEOUT);
+
+		return;
+	}
+
+	if (irq == PCF50633_IRQ_USBREM) {
+		cancel_delayed_work_sync(&gta02_charger_work);
+		gta02_usb_vbus_draw = 0;
+	}
+}
+
+static void gta02_udc_vbus_draw(unsigned int ma)
+{
+	if (!gta02_pcf)
+		return;
+
+	gta02_usb_vbus_draw = ma;
+
+	schedule_delayed_work(&gta02_charger_work,
+			      GTA02_CHARGER_CONFIGURE_TIMEOUT);
+}
+#else /* !CONFIG_CHARGER_PCF50633 */
+#define gta02_pmu_event_callback	NULL
+#define gta02_udc_vbus_draw		NULL
+#endif
+
+/*
+ * This is called when pc50633 is probed, unfortunately quite late in the
+ * day since it is an I2C bus device. Here we can belatedly define some
+ * platform devices with the advantage that we can mark the pcf50633 as the
+ * parent. This makes them get suspended and resumed with their parent
+ * the pcf50633 still around.
+ */
+
+static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf);
+
+
+static char *gta02_batteries[] = {
+	"battery",
+};
+
+struct pcf50633_platform_data gta02_pcf_pdata = {
+	.resumers = {
+		[0] =	PCF50633_INT1_USBINS |
+			PCF50633_INT1_USBREM |
+			PCF50633_INT1_ALARM,
+		[1] =	PCF50633_INT2_ONKEYF,
+		[2] =	PCF50633_INT3_ONKEY1S,
+		[3] =	PCF50633_INT4_LOWSYS |
+			PCF50633_INT4_LOWBAT |
+			PCF50633_INT4_HIGHTMP,
+	},
+
+	.batteries = gta02_batteries,
+	.num_batteries = ARRAY_SIZE(gta02_batteries),
+	.reg_init_data = {
+		[PCF50633_REGULATOR_AUTO] = {
+			.constraints = {
+				.min_uV = 3300000,
+				.max_uV = 3300000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.always_on = 1,
+				.apply_uV = 1,
+				.state_mem = {
+					.enabled = 1,
+				},
+			},
+		},
+		[PCF50633_REGULATOR_DOWN1] = {
+			.constraints = {
+				.min_uV = 1300000,
+				.max_uV = 1600000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.always_on = 1,
+				.apply_uV = 1,
+			},
+		},
+		[PCF50633_REGULATOR_DOWN2] = {
+			.constraints = {
+				.min_uV = 1800000,
+				.max_uV = 1800000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.apply_uV = 1,
+				.always_on = 1,
+				.state_mem = {
+					.enabled = 1,
+				},
+			},
+		},
+		[PCF50633_REGULATOR_HCLDO] = {
+			.constraints = {
+				.min_uV = 2000000,
+				.max_uV = 3300000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+				.always_on = 1,
+			},
+		},
+		[PCF50633_REGULATOR_LDO1] = {
+			.constraints = {
+				.min_uV = 3300000,
+				.max_uV = 3300000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.apply_uV = 1,
+				.state_mem = {
+					.enabled = 0,
+				},
+			},
+		},
+		[PCF50633_REGULATOR_LDO2] = {
+			.constraints = {
+				.min_uV = 3300000,
+				.max_uV = 3300000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.apply_uV = 1,
+			},
+		},
+		[PCF50633_REGULATOR_LDO3] = {
+			.constraints = {
+				.min_uV = 3000000,
+				.max_uV = 3000000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.apply_uV = 1,
+			},
+		},
+		[PCF50633_REGULATOR_LDO4] = {
+			.constraints = {
+				.min_uV = 3200000,
+				.max_uV = 3200000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.apply_uV = 1,
+			},
+		},
+		[PCF50633_REGULATOR_LDO5] = {
+			.constraints = {
+				.min_uV = 3000000,
+				.max_uV = 3000000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.apply_uV = 1,
+				.state_mem = {
+					.enabled = 1,
+				},
+			},
+		},
+		[PCF50633_REGULATOR_LDO6] = {
+			.constraints = {
+				.min_uV = 3000000,
+				.max_uV = 3000000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+			},
+		},
+		[PCF50633_REGULATOR_MEMLDO] = {
+			.constraints = {
+				.min_uV = 1800000,
+				.max_uV = 1800000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.state_mem = {
+					.enabled = 1,
+				},
+			},
+		},
+
+	},
+	.probe_done = gta02_pmu_attach_child_devices,
+	.mbc_event_callback = gta02_pmu_event_callback,
+};
+
+
+/* NOR Flash. */
+
+#define GTA02_FLASH_BASE	0x18000000 /* GCS3 */
+#define GTA02_FLASH_SIZE	0x200000 /* 2MBytes */
+
+static struct physmap_flash_data gta02_nor_flash_data = {
+	.width		= 2,
+};
+
+static struct resource gta02_nor_flash_resource = {
+	.start		= GTA02_FLASH_BASE,
+	.end		= GTA02_FLASH_BASE + GTA02_FLASH_SIZE - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device gta02_nor_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &gta02_nor_flash_data,
+	},
+	.resource	= &gta02_nor_flash_resource,
+	.num_resources	= 1,
+};
+
+
+struct platform_device s3c24xx_pwm_device = {
+	.name		= "s3c24xx_pwm",
+	.num_resources	= 0,
+};
+
+static struct i2c_board_info gta02_i2c_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("pcf50633", 0x73),
+		.irq = GTA02_IRQ_PCF50633,
+		.platform_data = &gta02_pcf_pdata,
+	},
+	{
+		I2C_BOARD_INFO("wm8753", 0x1a),
+	},
+};
+
+static struct s3c2410_nand_set gta02_nand_sets[] = {
+	[0] = {
+		/*
+		 * This name is also hard-coded in the boot loaders, so
+		 * changing it would would require all users to upgrade
+		 * their boot loaders, some of which are stored in a NOR
+		 * that is considered to be immutable.
+		 */
+		.name		= "neo1973-nand",
+		.nr_chips	= 1,
+		.use_bbt	= 1,
+		.force_soft_ecc	= 1,
+	},
+};
+
+/*
+ * Choose a set of timings derived from S3C@2442B MCP54
+ * data sheet (K5D2G13ACM-D075 MCP Memory).
+ */
+
+static struct s3c2410_platform_nand gta02_nand_info = {
+	.tacls		= 0,
+	.twrph0		= 25,
+	.twrph1		= 15,
+	.nr_sets	= ARRAY_SIZE(gta02_nand_sets),
+	.sets		= gta02_nand_sets,
+};
+
+
+static void gta02_udc_command(enum s3c2410_udc_cmd_e cmd)
+{
+	switch (cmd) {
+	case S3C2410_UDC_P_ENABLE:
+		pr_debug("%s S3C2410_UDC_P_ENABLE\n", __func__);
+		gpio_direction_output(GTA02_GPIO_USB_PULLUP, 1);
+		break;
+	case S3C2410_UDC_P_DISABLE:
+		pr_debug("%s S3C2410_UDC_P_DISABLE\n", __func__);
+		gpio_direction_output(GTA02_GPIO_USB_PULLUP, 0);
+		break;
+	case S3C2410_UDC_P_RESET:
+		pr_debug("%s S3C2410_UDC_P_RESET\n", __func__);
+		/* FIXME: Do something here. */
+	}
+}
+
+/* Get PMU to set USB current limit accordingly. */
+static struct s3c2410_udc_mach_info gta02_udc_cfg = {
+	.vbus_draw	= gta02_udc_vbus_draw,
+	.udc_command	= gta02_udc_command,
+
+};
+
+
+
+static void gta02_bl_set_intensity(int intensity)
+{
+	struct pcf50633 *pcf = gta02_pcf;
+	int old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
+
+	/* We map 8-bit intensity to 6-bit intensity in hardware. */
+	intensity >>= 2;
+
+	/*
+	 * This can happen during, eg, print of panic on blanked console,
+	 * but we can't service i2c without interrupts active, so abort.
+	 */
+	if (in_atomic()) {
+		printk(KERN_ERR "gta02_bl_set_intensity called while atomic\n");
+		return;
+	}
+
+	old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
+	if (intensity == old_intensity)
+		return;
+
+	/* We can't do this anywhere else. */
+	pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 5);
+
+	if (!(pcf50633_reg_read(pcf, PCF50633_REG_LEDENA) & 3))
+		old_intensity = 0;
+
+	/*
+	 * The PCF50633 cannot handle LEDOUT = 0 (datasheet p60)
+	 * if seen, you have to re-enable the LED unit.
+	 */
+	if (!intensity || !old_intensity)
+		pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0);
+
+	/* Illegal to set LEDOUT to 0. */
+	if (!intensity)
+		pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f, 2);
+	else
+		pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f,
+					  intensity);
+
+	if (intensity)
+		pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 2);
+
+}
+
+static struct generic_bl_info gta02_bl_info = {
+	.name			= "gta02-bl",
+	.max_intensity		= 0xff,
+	.default_intensity	= 0xff,
+	.set_bl_intensity	= gta02_bl_set_intensity,
+};
+
+static struct platform_device gta02_bl_dev = {
+	.name			= "generic-bl",
+	.id			= 1,
+	.dev = {
+		.platform_data = &gta02_bl_info,
+	},
+};
+
+
+
+/* USB */
+static struct s3c2410_hcd_info gta02_usb_info = {
+	.port[0]	= {
+		.flags	= S3C_HCDFLG_USED,
+	},
+	.port[1]	= {
+		.flags	= 0,
+	},
+};
+
+
+static void __init gta02_map_io(void)
+{
+	s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
+}
+
+
+/* These are the guys that don't need to be children of PMU. */
+
+static struct platform_device *gta02_devices[] __initdata = {
+	&s3c_device_usb,
+	&s3c_device_wdt,
+	&s3c_device_sdi,
+	&s3c_device_usbgadget,
+	&s3c_device_nand,
+	&gta02_nor_flash,
+	&s3c24xx_pwm_device,
+	&s3c_device_iis,
+	&s3c_device_i2c0,
+};
+
+/* These guys DO need to be children of PMU. */
+
+static struct platform_device *gta02_devices_pmu_children[] = {
+	&gta02_bl_dev,
+};
+
+
+/*
+ * This is called when pc50633 is probed, quite late in the day since it is an
+ * I2C bus device.  Here we can define platform devices with the advantage that
+ * we can mark the pcf50633 as the parent.  This makes them get suspended and
+ * resumed with their parent the pcf50633 still around.  All devices whose
+ * operation depends on something from pcf50633 must have this relationship
+ * made explicit like this, or suspend and resume will become an unreliable
+ * hellworld.
+ */
+
+static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf)
+{
+	int n;
+
+	/* Grab a copy of the now probed PMU pointer. */
+	gta02_pcf = pcf;
+
+	for (n = 0; n < ARRAY_SIZE(gta02_devices_pmu_children); n++)
+		gta02_devices_pmu_children[n]->dev.parent = pcf->dev;
+
+	platform_add_devices(gta02_devices_pmu_children,
+			     ARRAY_SIZE(gta02_devices_pmu_children));
+}
+
+static void gta02_poweroff(void)
+{
+	pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1);
+}
+
+static void __init gta02_machine_init(void)
+{
+	/* Set the panic callback to make AUX LED blink at ~5Hz. */
+	panic_blink = gta02_panic_blink;
+
+	s3c_pm_init();
+
+#ifdef CONFIG_CHARGER_PCF50633
+	INIT_DELAYED_WORK(&gta02_charger_work, gta02_charger_worker);
+#endif
+
+	s3c_device_usb.dev.platform_data = &gta02_usb_info;
+	s3c_device_nand.dev.platform_data = &gta02_nand_info;
+
+	s3c24xx_udc_set_platdata(&gta02_udc_cfg);
+	s3c_i2c0_set_platdata(NULL);
+
+	i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
+
+	platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
+	pm_power_off = gta02_poweroff;
+}
+
+
+MACHINE_START(NEO1973_GTA02, "GTA02")
+	/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.map_io		= gta02_map_io,
+	.init_irq	= s3c24xx_init_irq,
+	.init_machine	= gta02_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index 3a398befed4..03cd27d917b 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -62,6 +62,12 @@
 #define SHIFT_ASR	0x40
 #define SHIFT_RORRRX	0x60
 
+#define BAD_INSTR 	0xdeadc0de
+
+/* Thumb-2 32 bit format per ARMv7 DDI0406A A6.3, either f800h,e800h,f800h */
+#define IS_T32(hi16) \
+	(((hi16) & 0xe000) == 0xe000 && ((hi16) & 0x1800))
+
 static unsigned long ai_user;
 static unsigned long ai_sys;
 static unsigned long ai_skipped;
@@ -332,38 +338,48 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr,
 		      struct pt_regs *regs)
 {
 	unsigned int rd = RD_BITS(instr);
-
-	if (((rd & 1) == 1) || (rd == 14))
+	unsigned int rd2;
+	int load;
+
+	if ((instr & 0xfe000000) == 0xe8000000) {
+		/* ARMv7 Thumb-2 32-bit LDRD/STRD */
+		rd2 = (instr >> 8) & 0xf;
+		load = !!(LDST_L_BIT(instr));
+	} else if (((rd & 1) == 1) || (rd == 14))
 		goto bad;
+	else {
+		load = ((instr & 0xf0) == 0xd0);
+		rd2 = rd + 1;
+	}
 
 	ai_dword += 1;
 
 	if (user_mode(regs))
 		goto user;
 
-	if ((instr & 0xf0) == 0xd0) {
+	if (load) {
 		unsigned long val;
 		get32_unaligned_check(val, addr);
 		regs->uregs[rd] = val;
 		get32_unaligned_check(val, addr + 4);
-		regs->uregs[rd + 1] = val;
+		regs->uregs[rd2] = val;
 	} else {
 		put32_unaligned_check(regs->uregs[rd], addr);
-		put32_unaligned_check(regs->uregs[rd + 1], addr + 4);
+		put32_unaligned_check(regs->uregs[rd2], addr + 4);
 	}
 
 	return TYPE_LDST;
 
  user:
-	if ((instr & 0xf0) == 0xd0) {
+	if (load) {
 		unsigned long val;
 		get32t_unaligned_check(val, addr);
 		regs->uregs[rd] = val;
 		get32t_unaligned_check(val, addr + 4);
-		regs->uregs[rd + 1] = val;
+		regs->uregs[rd2] = val;
 	} else {
 		put32t_unaligned_check(regs->uregs[rd], addr);
-		put32t_unaligned_check(regs->uregs[rd + 1], addr + 4);
+		put32t_unaligned_check(regs->uregs[rd2], addr + 4);
 	}
 
 	return TYPE_LDST;
@@ -616,8 +632,72 @@ thumb2arm(u16 tinstr)
 		/* Else fall through for illegal instruction case */
 
 	default:
-		return 0xdeadc0de;
+		return BAD_INSTR;
+	}
+}
+
+/*
+ * Convert Thumb-2 32 bit LDM, STM, LDRD, STRD to equivalent instruction
+ * handlable by ARM alignment handler, also find the corresponding handler,
+ * so that we can reuse ARM userland alignment fault fixups for Thumb.
+ *
+ * @pinstr: original Thumb-2 instruction; returns new handlable instruction
+ * @regs: register context.
+ * @poffset: return offset from faulted addr for later writeback
+ *
+ * NOTES:
+ * 1. Comments below refer to ARMv7 DDI0406A Thumb Instruction sections.
+ * 2. Register name Rt from ARMv7 is same as Rd from ARMv6 (Rd is Rt)
+ */
+static void *
+do_alignment_t32_to_handler(unsigned long *pinstr, struct pt_regs *regs,
+			    union offset_union *poffset)
+{
+	unsigned long instr = *pinstr;
+	u16 tinst1 = (instr >> 16) & 0xffff;
+	u16 tinst2 = instr & 0xffff;
+	poffset->un = 0;
+
+	switch (tinst1 & 0xffe0) {
+	/* A6.3.5 Load/Store multiple */
+	case 0xe880:		/* STM/STMIA/STMEA,LDM/LDMIA, PUSH/POP T2 */
+	case 0xe8a0:		/* ...above writeback version */
+	case 0xe900:		/* STMDB/STMFD, LDMDB/LDMEA */
+	case 0xe920:		/* ...above writeback version */
+		/* no need offset decision since handler calculates it */
+		return do_alignment_ldmstm;
+
+	case 0xf840:		/* POP/PUSH T3 (single register) */
+		if (RN_BITS(instr) == 13 && (tinst2 & 0x09ff) == 0x0904) {
+			u32 L = !!(LDST_L_BIT(instr));
+			const u32 subset[2] = {
+				0xe92d0000,	/* STMDB sp!,{registers} */
+				0xe8bd0000,	/* LDMIA sp!,{registers} */
+			};
+			*pinstr = subset[L] | (1<<RD_BITS(instr));
+			return do_alignment_ldmstm;
+		}
+		/* Else fall through for illegal instruction case */
+		break;
+
+	/* A6.3.6 Load/store double, STRD/LDRD(immed, lit, reg) */
+	case 0xe860:
+	case 0xe960:
+	case 0xe8e0:
+	case 0xe9e0:
+		poffset->un = (tinst2 & 0xff) << 2;
+	case 0xe940:
+	case 0xe9c0:
+		return do_alignment_ldrdstrd;
+
+	/*
+	 * No need to handle load/store instructions up to word size
+	 * since ARMv6 and later CPUs can perform unaligned accesses.
+	 */
+	default:
+		break;
 	}
+	return NULL;
 }
 
 static int
@@ -630,6 +710,8 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	mm_segment_t fs;
 	unsigned int fault;
 	u16 tinstr = 0;
+	int isize = 4;
+	int thumb2_32b = 0;
 
 	instrptr = instruction_pointer(regs);
 
@@ -637,8 +719,19 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	set_fs(KERNEL_DS);
 	if (thumb_mode(regs)) {
 		fault = __get_user(tinstr, (u16 *)(instrptr & ~1));
-		if (!(fault))
-			instr = thumb2arm(tinstr);
+		if (!fault) {
+			if (cpu_architecture() >= CPU_ARCH_ARMv7 &&
+			    IS_T32(tinstr)) {
+				/* Thumb-2 32-bit */
+				u16 tinst2 = 0;
+				fault = __get_user(tinst2, (u16 *)(instrptr+2));
+				instr = (tinstr << 16) | tinst2;
+				thumb2_32b = 1;
+			} else {
+				isize = 2;
+				instr = thumb2arm(tinstr);
+			}
+		}
 	} else
 		fault = __get_user(instr, (u32 *)instrptr);
 	set_fs(fs);
@@ -655,7 +748,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 
  fixup:
 
-	regs->ARM_pc += thumb_mode(regs) ? 2 : 4;
+	regs->ARM_pc += isize;
 
 	switch (CODING_BITS(instr)) {
 	case 0x00000000:	/* 3.13.4 load/store instruction extensions */
@@ -714,18 +807,25 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 		handler = do_alignment_ldrstr;
 		break;
 
-	case 0x08000000:	/* ldm or stm */
-		handler = do_alignment_ldmstm;
+	case 0x08000000:	/* ldm or stm, or thumb-2 32bit instruction */
+		if (thumb2_32b)
+			handler = do_alignment_t32_to_handler(&instr, regs, &offset);
+		else
+			handler = do_alignment_ldmstm;
 		break;
 
 	default:
 		goto bad;
 	}
 
+	if (!handler)
+		goto bad;
 	type = handler(addr, instr, regs);
 
-	if (type == TYPE_ERROR || type == TYPE_FAULT)
+	if (type == TYPE_ERROR || type == TYPE_FAULT) {
+		regs->ARM_pc -= isize;
 		goto bad_or_fault;
+	}
 
 	if (type == TYPE_LDST)
 		do_alignment_finish_ldst(addr, instr, regs, offset);
@@ -735,7 +835,6 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
  bad_or_fault:
 	if (type == TYPE_ERROR)
 		goto bad;
-	regs->ARM_pc -= thumb_mode(regs) ? 2 : 4;
 	/*
 	 * We got a fault - fix it up, or die.
 	 */
@@ -751,8 +850,8 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	 */
 	printk(KERN_ERR "Alignment trap: not handling instruction "
 		"%0*lx at [<%08lx>]\n",
-		thumb_mode(regs) ? 4 : 8,
-		thumb_mode(regs) ? tinstr : instr, instrptr);
+		isize << 1,
+		isize == 2 ? tinstr : instr, instrptr);
 	ai_skipped += 1;
 	return 1;
 
@@ -763,8 +862,8 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 		printk("Alignment trap: %s (%d) PC=0x%08lx Instr=0x%0*lx "
 		       "Address=0x%08lx FSR 0x%03x\n", current->comm,
 			task_pid_nr(current), instrptr,
-		        thumb_mode(regs) ? 4 : 8,
-		        thumb_mode(regs) ? tinstr : instr,
+			isize << 1,
+			isize == 2 ? tinstr : instr,
 		        addr, fsr);
 
 	if (ai_usermode & UM_FIXUP)
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 0455557a289..6fdcbb70982 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -208,7 +208,7 @@ good_area:
 	 * than endlessly redo the fault.
 	 */
 survive:
-	fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, fsr & (1 << 11));
+	fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, (fsr & (1 << 11)) ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index fdaa9bb87c1..4722582b17b 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -836,6 +836,13 @@ void __init reserve_node_zero(pg_data_t *pgdat)
 				BOOTMEM_EXCLUSIVE);
 	}
 
+	if (machine_is_treo680()) {
+		reserve_bootmem_node(pgdat, 0xa0000000, 0x1000,
+				BOOTMEM_EXCLUSIVE);
+		reserve_bootmem_node(pgdat, 0xa2000000, 0x1000,
+				BOOTMEM_EXCLUSIVE);
+	}
+
 	if (machine_is_palmt5())
 		reserve_bootmem_node(pgdat, 0xa0200000, 0x1000,
 				BOOTMEM_EXCLUSIVE);
diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h
index dca7c16ae90..4d53cc59d7a 100644
--- a/arch/arm/plat-omap/include/mach/sram.h
+++ b/arch/arm/plat-omap/include/mach/sram.h
@@ -24,7 +24,8 @@ extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
 extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl,
 				     u32 sdrc_actim_ctrla,
 				     u32 sdrc_actim_ctrlb, u32 m2,
-				     u32 unlock_dll);
+				     u32 unlock_dll, u32 f, u32 sdrc_mr,
+				     u32 inc);
 
 /* Do not use these */
 extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
@@ -62,7 +63,8 @@ extern unsigned long omap243x_sram_reprogram_sdrc_sz;
 extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl,
 					  u32 sdrc_actim_ctrla,
 					  u32 sdrc_actim_ctrlb, u32 m2,
-					  u32 unlock_dll);
+					  u32 unlock_dll, u32 f, u32 sdrc_mr,
+					  u32 inc);
 extern unsigned long omap3_sram_configure_core_dpll_sz;
 
 #endif
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index a5b9bcd6b10..65006df3f1b 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -371,15 +371,17 @@ static inline int omap243x_sram_init(void)
 static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl,
 					      u32 sdrc_actim_ctrla,
 					      u32 sdrc_actim_ctrlb,
-					      u32 m2, u32 unlock_dll);
+					      u32 m2, u32 unlock_dll,
+					      u32 f, u32 sdrc_mr, u32 inc);
 u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla,
-			      u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll)
+			      u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll,
+			      u32 f, u32 sdrc_mr, u32 inc)
 {
 	BUG_ON(!_omap3_sram_configure_core_dpll);
 	return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl,
 					       sdrc_actim_ctrla,
 					       sdrc_actim_ctrlb, m2,
-					       unlock_dll);
+					       unlock_dll, f, sdrc_mr, inc);
 }
 
 /* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 610651455a7..74bb7cb5da4 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
 obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
 obj-y				+= dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
+obj-$(CONFIG_SND_S3C24XX_SOC)	+= dev-audio.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
 obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
 obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
diff --git a/arch/arm/plat-s3c/dev-audio.c b/arch/arm/plat-s3c/dev-audio.c
new file mode 100644
index 00000000000..1322beb40dd
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-audio.c
@@ -0,0 +1,68 @@
+/* linux/arch/arm/plat-s3c/dev-audio.c
+ *
+ * Copyright 2009 Wolfson Microelectronics
+ *      Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+
+static struct resource s3c64xx_iis0_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_IIS0,
+		.end   = S3C64XX_PA_IIS0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device s3c64xx_device_iis0 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iis0_resource),
+	.resource	  = s3c64xx_iis0_resource,
+};
+EXPORT_SYMBOL(s3c64xx_device_iis0);
+
+static struct resource s3c64xx_iis1_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_IIS1,
+		.end   = S3C64XX_PA_IIS1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device s3c64xx_device_iis1 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iis1_resource),
+	.resource	  = s3c64xx_iis1_resource,
+};
+EXPORT_SYMBOL(s3c64xx_device_iis1);
+
+static struct resource s3c64xx_iisv4_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_IISV4,
+		.end   = S3C64XX_PA_IISV4 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device s3c64xx_device_iisv4 = {
+	.name		  = "s3c64xx-iis-v4",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iisv4_resource),
+	.resource	  = s3c64xx_iisv4_resource,
+};
+EXPORT_SYMBOL(s3c64xx_device_iisv4);
diff --git a/arch/arm/plat-s3c/gpio-config.c b/arch/arm/plat-s3c/gpio-config.c
index 08044dec973..456969b6fa0 100644
--- a/arch/arm/plat-s3c/gpio-config.c
+++ b/arch/arm/plat-s3c/gpio-config.c
@@ -119,7 +119,7 @@ int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
 	unsigned int shift = (off & 7) * 4;
 	u32 con;
 
-	if (off < 8 && chip->chip.ngpio >= 8)
+	if (off < 8 && chip->chip.ngpio > 8)
 		reg -= 4;
 
 	if (s3c_gpio_is_cfg_special(cfg)) {
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index a0b6768fddc..b5b9c4d46e9 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -24,13 +24,16 @@ extern struct platform_device *s3c24xx_uart_src[];
 
 extern struct platform_device s3c_device_timer[];
 
+extern struct platform_device s3c64xx_device_iis0;
+extern struct platform_device s3c64xx_device_iis1;
+extern struct platform_device s3c64xx_device_iisv4;
+
 extern struct platform_device s3c_device_fb;
 extern struct platform_device s3c_device_usb;
 extern struct platform_device s3c_device_lcd;
 extern struct platform_device s3c_device_wdt;
 extern struct platform_device s3c_device_i2c0;
 extern struct platform_device s3c_device_i2c1;
-extern struct platform_device s3c_device_iis;
 extern struct platform_device s3c_device_rtc;
 extern struct platform_device s3c_device_adc;
 extern struct platform_device s3c_device_sdi;
diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-s3c/include/plat/nand.h
index f4dcd14af05..18f958801e6 100644
--- a/arch/arm/plat-s3c/include/plat/nand.h
+++ b/arch/arm/plat-s3c/include/plat/nand.h
@@ -10,19 +10,26 @@
  * published by the Free Software Foundation.
 */
 
-/* struct s3c2410_nand_set
+/**
+ * struct s3c2410_nand_set - define a set of one or more nand chips
+ * @disable_ecc:	Entirely disable ECC - Dangerous
+ * @flash_bbt: 		Openmoko u-boot can create a Bad Block Table
+ *			Setting this flag will allow the kernel to
+ *			look for it at boot time and also skip the NAND
+ *			scan.
+ * @nr_chips:		Number of chips in this set
+ * @nr_partitions:	Number of partitions pointed to by @partitions
+ * @name:		Name of set (optional)
+ * @nr_map:		Map for low-layer logical to physical chip numbers (option)
+ * @partitions:		The mtd partition list
  *
- * define an set of one or more nand chips registered with an unique mtd
- *
- * nr_chips	 = number of chips in this set
- * nr_partitions = number of partitions pointed to be partitoons (or zero)
- * name		 = name of set (optional)
- * nr_map	 = map for low-layer logical to physical chip numbers (option)
- * partitions	 = mtd partition list
-*/
-
+ * define a set of one or more nand chips registered with an unique mtd. Also
+ * allows to pass flag to the underlying NAND layer. 'disable_ecc' will trigger
+ * a warning at boot time.
+ */
 struct s3c2410_nand_set {
-	unsigned int		disable_ecc : 1;
+	unsigned int		disable_ecc:1;
+	unsigned int		flash_bbt:1;
 
 	int			nr_chips;
 	int			nr_partitions;
@@ -39,7 +46,7 @@ struct s3c2410_platform_nand {
 	int	twrph0;	/* active time for nWE/nOE */
 	int	twrph1;	/* time for release CLE/ALE from nWE/nOE inactive */
 
-	unsigned int	ignore_unset_ecc : 1;
+	unsigned int	ignore_unset_ecc:1;
 
 	int			nr_sets;
 	struct s3c2410_nand_set *sets;
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
index 2ed5df34f9e..3c8882cd626 100644
--- a/arch/arm/plat-s3c64xx/Makefile
+++ b/arch/arm/plat-s3c64xx/Makefile
@@ -23,6 +23,7 @@ obj-y				+= gpiolib.o
 
 obj-$(CONFIG_CPU_S3C6400_INIT)	+= s3c6400-init.o
 obj-$(CONFIG_CPU_S3C6400_CLOCK)	+= s3c6400-clock.o
+obj-$(CONFIG_CPU_FREQ_S3C64XX)  += cpufreq.o
 
 # PM support
 
diff --git a/arch/arm/plat-s3c64xx/clock.c b/arch/arm/plat-s3c64xx/clock.c
index 0bc2fa1dfc4..7a36e899360 100644
--- a/arch/arm/plat-s3c64xx/clock.c
+++ b/arch/arm/plat-s3c64xx/clock.c
@@ -191,7 +191,7 @@ static struct clk init_clocks[] = {
 		.id		= -1,
 		.parent		= &clk_h,
 		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_UHOST,
+		.ctrlbit	= S3C_CLKCON_HCLK_UHOST,
 	}, {
 		.name		= "hsmmc",
 		.id		= 0,
diff --git a/arch/arm/plat-s3c64xx/cpufreq.c b/arch/arm/plat-s3c64xx/cpufreq.c
new file mode 100644
index 00000000000..e6e0843215d
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/cpufreq.c
@@ -0,0 +1,262 @@
+/* linux/arch/arm/plat-s3c64xx/cpufreq.c
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * S3C64xx CPUfreq Support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/regulator/consumer.h>
+
+static struct clk *armclk;
+static struct regulator *vddarm;
+
+#ifdef CONFIG_CPU_S3C6410
+struct s3c64xx_dvfs {
+	unsigned int vddarm_min;
+	unsigned int vddarm_max;
+};
+
+static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = {
+	[0] = { 1000000, 1000000 },
+	[1] = { 1000000, 1050000 },
+	[2] = { 1050000, 1100000 },
+	[3] = { 1050000, 1150000 },
+	[4] = { 1250000, 1350000 },
+};
+
+static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
+	{ 0,  66000 },
+	{ 0, 133000 },
+	{ 1, 222000 },
+	{ 1, 266000 },
+	{ 2, 333000 },
+	{ 2, 400000 },
+	{ 3, 532000 },
+	{ 3, 533000 },
+	{ 4, 667000 },
+	{ 0, CPUFREQ_TABLE_END },
+};
+#endif
+
+static int s3c64xx_cpufreq_verify_speed(struct cpufreq_policy *policy)
+{
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	return cpufreq_frequency_table_verify(policy, s3c64xx_freq_table);
+}
+
+static unsigned int s3c64xx_cpufreq_get_speed(unsigned int cpu)
+{
+	if (cpu != 0)
+		return 0;
+
+	return clk_get_rate(armclk) / 1000;
+}
+
+static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
+				      unsigned int target_freq,
+				      unsigned int relation)
+{
+	int ret;
+	unsigned int i;
+	struct cpufreq_freqs freqs;
+	struct s3c64xx_dvfs *dvfs;
+
+	ret = cpufreq_frequency_table_target(policy, s3c64xx_freq_table,
+					     target_freq, relation, &i);
+	if (ret != 0)
+		return ret;
+
+	freqs.cpu = 0;
+	freqs.old = clk_get_rate(armclk) / 1000;
+	freqs.new = s3c64xx_freq_table[i].frequency;
+	freqs.flags = 0;
+	dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].index];
+
+	if (freqs.old == freqs.new)
+		return 0;
+
+	pr_debug("cpufreq: Transition %d-%dkHz\n", freqs.old, freqs.new);
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+#ifdef CONFIG_REGULATOR
+	if (vddarm && freqs.new > freqs.old) {
+		ret = regulator_set_voltage(vddarm,
+					    dvfs->vddarm_min,
+					    dvfs->vddarm_max);
+		if (ret != 0) {
+			pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n",
+			       freqs.new, ret);
+			goto err;
+		}
+	}
+#endif
+
+	ret = clk_set_rate(armclk, freqs.new * 1000);
+	if (ret < 0) {
+		pr_err("cpufreq: Failed to set rate %dkHz: %d\n",
+		       freqs.new, ret);
+		goto err;
+	}
+
+#ifdef CONFIG_REGULATOR
+	if (vddarm && freqs.new < freqs.old) {
+		ret = regulator_set_voltage(vddarm,
+					    dvfs->vddarm_min,
+					    dvfs->vddarm_max);
+		if (ret != 0) {
+			pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n",
+			       freqs.new, ret);
+			goto err_clk;
+		}
+	}
+#endif
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	pr_debug("cpufreq: Set actual frequency %lukHz\n",
+		 clk_get_rate(armclk) / 1000);
+
+	return 0;
+
+err_clk:
+	if (clk_set_rate(armclk, freqs.old * 1000) < 0)
+		pr_err("Failed to restore original clock rate\n");
+err:
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	return ret;
+}
+
+#ifdef CONFIG_REGULATOR
+static void __init s3c64xx_cpufreq_constrain_voltages(void)
+{
+	int count, v, i, found;
+	struct cpufreq_frequency_table *freq;
+	struct s3c64xx_dvfs *dvfs;
+
+	count = regulator_count_voltages(vddarm);
+	if (count < 0) {
+		pr_err("cpufreq: Unable to check supported voltages\n");
+		return;
+	}
+
+	freq = s3c64xx_freq_table;
+	while (freq->frequency != CPUFREQ_TABLE_END) {
+		if (freq->frequency == CPUFREQ_ENTRY_INVALID)
+			continue;
+
+		dvfs = &s3c64xx_dvfs_table[freq->index];
+		found = 0;
+
+		for (i = 0; i < count; i++) {
+			v = regulator_list_voltage(vddarm, i);
+			if (v >= dvfs->vddarm_min && v <= dvfs->vddarm_max)
+				found = 1;
+		}
+
+		if (!found) {
+			pr_debug("cpufreq: %dkHz unsupported by regulator\n",
+				 freq->frequency);
+			freq->frequency = CPUFREQ_ENTRY_INVALID;
+		}
+
+		freq++;
+	}
+}
+#endif
+
+static int __init s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
+{
+	int ret;
+	struct cpufreq_frequency_table *freq;
+
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	if (s3c64xx_freq_table == NULL) {
+		pr_err("cpufreq: No frequency information for this CPU\n");
+		return -ENODEV;
+	}
+
+	armclk = clk_get(NULL, "armclk");
+	if (IS_ERR(armclk)) {
+		pr_err("cpufreq: Unable to obtain ARMCLK: %ld\n",
+		       PTR_ERR(armclk));
+		return PTR_ERR(armclk);
+	}
+
+#ifdef CONFIG_REGULATOR
+	vddarm = regulator_get(NULL, "vddarm");
+	if (IS_ERR(vddarm)) {
+		ret = PTR_ERR(vddarm);
+		pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret);
+		pr_err("cpufreq: Only frequency scaling available\n");
+		vddarm = NULL;
+	} else {
+		s3c64xx_cpufreq_constrain_voltages();
+	}
+#endif
+
+	freq = s3c64xx_freq_table;
+	while (freq->frequency != CPUFREQ_TABLE_END) {
+		unsigned long r;
+
+		/* Check for frequencies we can generate */
+		r = clk_round_rate(armclk, freq->frequency * 1000);
+		r /= 1000;
+		if (r != freq->frequency)
+			freq->frequency = CPUFREQ_ENTRY_INVALID;
+
+		/* If we have no regulator then assume startup
+		 * frequency is the maximum we can support. */
+		if (!vddarm && freq->frequency > s3c64xx_cpufreq_get_speed(0))
+			freq->frequency = CPUFREQ_ENTRY_INVALID;
+
+		freq++;
+	}
+
+	policy->cur = clk_get_rate(armclk) / 1000;
+
+	/* Pick a conservative guess in ns: we'll need ~1 I2C/SPI
+	 * write plus clock reprogramming. */
+	policy->cpuinfo.transition_latency = 2 * 1000 * 1000;
+
+	ret = cpufreq_frequency_table_cpuinfo(policy, s3c64xx_freq_table);
+	if (ret != 0) {
+		pr_err("cpufreq: Failed to configure frequency table: %d\n",
+		       ret);
+		regulator_put(vddarm);
+		clk_put(armclk);
+	}
+
+	return ret;
+}
+
+static struct cpufreq_driver s3c64xx_cpufreq_driver = {
+	.owner		= THIS_MODULE,
+	.flags          = 0,
+	.verify		= s3c64xx_cpufreq_verify_speed,
+	.target		= s3c64xx_cpufreq_set_target,
+	.get		= s3c64xx_cpufreq_get_speed,
+	.init		= s3c64xx_cpufreq_driver_init,
+	.name		= "s3c",
+};
+
+static int __init s3c64xx_cpufreq_init(void)
+{
+	return cpufreq_register_driver(&s3c64xx_cpufreq_driver);
+}
+module_init(s3c64xx_cpufreq_init);
diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c
index da7b60ee5e6..92859290ea3 100644
--- a/arch/arm/plat-s3c64xx/gpiolib.c
+++ b/arch/arm/plat-s3c64xx/gpiolib.c
@@ -321,6 +321,11 @@ static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = {
 	.get_pull	= s3c_gpio_getpull_updown,
 };
 
+int s3c64xx_gpio2int_gpn(struct gpio_chip *chip, unsigned pin)
+{
+	return IRQ_EINT(0) + pin;
+}
+
 static struct s3c_gpio_chip gpio_2bit[] = {
 	{
 		.base	= S3C64XX_GPF_BASE,
@@ -353,6 +358,7 @@ static struct s3c_gpio_chip gpio_2bit[] = {
 			.base	= S3C64XX_GPN(0),
 			.ngpio	= S3C64XX_GPIO_N_NR,
 			.label	= "GPN",
+			.to_irq = s3c64xx_gpio2int_gpn,
 		},
 	}, {
 		.base	= S3C64XX_GPO_BASE,
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
index 52836d41e33..a8777a755df 100644
--- a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
+++ b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
@@ -88,11 +88,11 @@
 #define S3C6400_CLKDIV2_SPI0_SHIFT	(0)
 
 /* HCLK GATE Registers */
-#define S3C_CLKCON_HCLK_BUS	(1<<30)
-#define S3C_CLKCON_HCLK_SECUR	(1<<29)
-#define S3C_CLKCON_HCLK_SDMA1	(1<<28)
-#define S3C_CLKCON_HCLK_SDMA2	(1<<27)
-#define S3C_CLKCON_HCLK_UHOST	(1<<26)
+#define S3C_CLKCON_HCLK_3DSE	(1<<31)
+#define S3C_CLKCON_HCLK_UHOST	(1<<29)
+#define S3C_CLKCON_HCLK_SECUR	(1<<28)
+#define S3C_CLKCON_HCLK_SDMA1	(1<<27)
+#define S3C_CLKCON_HCLK_SDMA0	(1<<26)
 #define S3C_CLKCON_HCLK_IROM	(1<<25)
 #define S3C_CLKCON_HCLK_DDR1	(1<<24)
 #define S3C_CLKCON_HCLK_DDR0	(1<<23)
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index fec64678a63..33026eff2aa 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Fri May 29 10:14:20 2009
+# Last update: Sat Jun 20 22:28:39 2009
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1455,7 +1455,7 @@ gba			MACH_GBA		GBA			1457
 h6044			MACH_H6044		H6044			1458
 app			MACH_APP		APP			1459
 tct_hammer		MACH_TCT_HAMMER		TCT_HAMMER		1460
-herald			MACH_HERMES		HERMES			1461
+herald			MACH_HERALD		HERALD			1461
 artemis			MACH_ARTEMIS		ARTEMIS			1462
 htctitan		MACH_HTCTITAN		HTCTITAN		1463
 qranium			MACH_QRANIUM		QRANIUM			1464
@@ -2245,3 +2245,38 @@ str9			MACH_STR9		STR9			2257
 omap3_wl_ff		MACH_OMAP3_WL_FF	OMAP3_WL_FF		2258
 simcom			MACH_SIMCOM		SIMCOM			2259
 mcwebio			MACH_MCWEBIO		MCWEBIO			2260
+omap3_phrazer		MACH_OMAP3_PHRAZER	OMAP3_PHRAZER		2261
+darwin			MACH_DARWIN		DARWIN			2262
+oratiscomu		MACH_ORATISCOMU		ORATISCOMU		2263
+rtsbc20			MACH_RTSBC20		RTSBC20			2264
+i780			MACH_I780		I780			2265
+gemini324		MACH_GEMINI324		GEMINI324		2266
+oratislan		MACH_ORATISLAN		ORATISLAN		2267
+oratisalog		MACH_ORATISALOG		ORATISALOG		2268
+oratismadi		MACH_ORATISMADI		ORATISMADI		2269
+oratisot16		MACH_ORATISOT16		ORATISOT16		2270
+oratisdesk		MACH_ORATISDESK		ORATISDESK		2271
+v2p_ca9			MACH_V2P_CA9		V2P_CA9			2272
+sintexo			MACH_SINTEXO		SINTEXO			2273
+cm3389			MACH_CM3389		CM3389			2274
+omap3_cio		MACH_OMAP3_CIO		OMAP3_CIO		2275
+sgh_i900		MACH_SGH_I900		SGH_I900		2276
+bst100			MACH_BST100		BST100			2277
+passion			MACH_PASSION		PASSION			2278
+indesign_at91sam	MACH_INDESIGN_AT91SAM	INDESIGN_AT91SAM	2279
+c4_badger		MACH_C4_BADGER		C4_BADGER		2280
+c4_viper		MACH_C4_VIPER		C4_VIPER		2281
+d2net			MACH_D2NET		D2NET			2282
+bigdisk			MACH_BIGDISK		BIGDISK			2283
+notalvision		MACH_NOTALVISION	NOTALVISION		2284
+omap3_kboc		MACH_OMAP3_KBOC		OMAP3_KBOC		2285
+cyclone			MACH_CYCLONE		CYCLONE			2286
+ninja			MACH_NINJA		NINJA			2287
+at91sam9g20ek_2mmc	MACH_AT91SAM9G20EK_2MMC	AT91SAM9G20EK_2MMC	2288
+bcmring			MACH_BCMRING		BCMRING			2289
+resol_dl2		MACH_RESOL_DL2		RESOL_DL2		2290
+ifosw			MACH_IFOSW		IFOSW			2291
+htcrhodium		MACH_HTCRHODIUM		HTCRHODIUM		2292
+htctopaz		MACH_HTCTOPAZ		HTCTOPAZ		2293
+matrix504		MACH_MATRIX504		MATRIX504		2294
+mrfsa			MACH_MRFSA		MRFSA			2295
diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
index 1bbe1da5486..93c0342530a 100644
--- a/arch/avr32/kernel/process.c
+++ b/arch/avr32/kernel/process.c
@@ -394,8 +394,6 @@ asmlinkage int sys_execve(char __user *ufilename, char __user *__user *uargv,
 		goto out;
 
 	error = do_execve(filename, uargv, uenvp, regs);
-	if (error == 0)
-		current->ptrace &= ~PT_DTRACE;
 	putname(filename);
 
 out:
diff --git a/arch/avr32/mm/fault.c b/arch/avr32/mm/fault.c
index 62d4abbaa65..b61d86d3deb 100644
--- a/arch/avr32/mm/fault.c
+++ b/arch/avr32/mm/fault.c
@@ -133,7 +133,7 @@ good_area:
 	 * fault.
 	 */
 survive:
-	fault = handle_mm_fault(mm, vma, address, writeaccess);
+	fault = handle_mm_fault(mm, vma, address, writeaccess ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 8ea0d942cde..7faa2f554ab 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -274,7 +274,7 @@ config BF_REV_0_0
 
 config BF_REV_0_1
 	bool "0.1"
-	depends on (BF52x || (BF54x && !BF54xM))
+	depends on (BF51x || BF52x || (BF54x && !BF54xM))
 
 config BF_REV_0_2
 	bool "0.2"
@@ -358,7 +358,7 @@ config MEM_MT48LC8M32B2B5_7
 
 config MEM_MT48LC32M16A2TG_75
 	bool
-	depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP || BFIN526_EZBRD)
+	depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP)
 	default y
 
 config MEM_MT48LC32M8A2_75
@@ -366,6 +366,11 @@ config MEM_MT48LC32M8A2_75
 	depends on (BFIN518F_EZBRD)
 	default y
 
+config MEM_MT48H32M16LFCJ_75
+	bool
+	depends on (BFIN526_EZBRD)
+	default y
+
 source "arch/blackfin/mach-bf518/Kconfig"
 source "arch/blackfin/mach-bf527/Kconfig"
 source "arch/blackfin/mach-bf533/Kconfig"
@@ -623,7 +628,6 @@ choice
 config TICKSOURCE_GPTMR0
 	bool "Gptimer0 (SCLK domain)"
 	select BFIN_GPTIMERS
-	depends on !IPIPE
 
 config TICKSOURCE_CORETMR
 	bool "Core timer (CCLK domain)"
@@ -644,6 +648,7 @@ config CYCLES_CLOCKSOURCE
 
 config GPTMR0_CLOCKSOURCE
 	bool "Use GPTimer0 as a clocksource (higher rating)"
+	select BFIN_GPTIMERS
 	depends on GENERIC_CLOCKEVENTS
 	depends on !TICKSOURCE_GPTMR0
 
@@ -908,23 +913,41 @@ endchoice
 
 
 comment "Cache Support"
+
 config BFIN_ICACHE
 	bool "Enable ICACHE"
+	default y
+config BFIN_ICACHE_LOCK
+	bool "Enable Instruction Cache Locking"
+	depends on BFIN_ICACHE
+	default n
+config BFIN_EXTMEM_ICACHEABLE
+	bool "Enable ICACHE for external memory"
+	depends on BFIN_ICACHE
+	default y
+config BFIN_L2_ICACHEABLE
+	bool "Enable ICACHE for L2 SRAM"
+	depends on BFIN_ICACHE
+	depends on BF54x || BF561
+	default n
+
 config BFIN_DCACHE
 	bool "Enable DCACHE"
+	default y
 config BFIN_DCACHE_BANKA
 	bool "Enable only 16k BankA DCACHE - BankB is SRAM"
 	depends on BFIN_DCACHE && !BF531
 	default n
-config BFIN_ICACHE_LOCK
-	bool "Enable Instruction Cache Locking"
-
-choice
-	prompt "External memory cache policy"
+config BFIN_EXTMEM_DCACHEABLE
+	bool "Enable DCACHE for external memory"
 	depends on BFIN_DCACHE
-	default BFIN_WB if !SMP
-	default BFIN_WT if SMP
-config BFIN_WB
+	default y
+choice
+	prompt "External memory DCACHE policy"
+	depends on BFIN_EXTMEM_DCACHEABLE
+	default BFIN_EXTMEM_WRITEBACK if !SMP
+	default BFIN_EXTMEM_WRITETHROUGH if SMP
+config BFIN_EXTMEM_WRITEBACK
 	bool "Write back"
 	depends on !SMP
 	help
@@ -942,7 +965,7 @@ config BFIN_WB
 	  If you are unsure of the options and you want to be safe,
 	  then go with Write Through.
 
-config BFIN_WT
+config BFIN_EXTMEM_WRITETHROUGH
 	bool "Write through"
 	help
 	  Write Back Policy:
@@ -961,23 +984,26 @@ config BFIN_WT
 
 endchoice
 
+config BFIN_L2_DCACHEABLE
+	bool "Enable DCACHE for L2 SRAM"
+	depends on BFIN_DCACHE
+	depends on BF54x || BF561
+	default n
 choice
-	prompt "L2 SRAM cache policy"
-	depends on (BF54x || BF561)
-	default BFIN_L2_WT
-config BFIN_L2_WB
+	prompt "L2 SRAM DCACHE policy"
+	depends on BFIN_L2_DCACHEABLE
+	default BFIN_L2_WRITEBACK
+config BFIN_L2_WRITEBACK
 	bool "Write back"
 	depends on !SMP
 
-config BFIN_L2_WT
+config BFIN_L2_WRITETHROUGH
 	bool "Write through"
 	depends on !SMP
-
-config BFIN_L2_NOT_CACHED
-	bool "Not cached"
-
 endchoice
 
+
+comment "Memory Protection Unit"
 config MPU
 	bool "Enable the memory protection unit (EXPERIMENTAL)"
 	default n
diff --git a/arch/blackfin/boot/Makefile b/arch/blackfin/boot/Makefile
index 3ab6f23561d..fd9ccc5fea1 100644
--- a/arch/blackfin/boot/Makefile
+++ b/arch/blackfin/boot/Makefile
@@ -13,7 +13,7 @@ extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(ARCH) -O linux -T kernel \
-                   -C $(2) -n 'Linux-$(KERNELRELEASE)' -a $(CONFIG_BOOT_LOAD) \
+                   -C $(2) -n '$(MACHINE)-$(KERNELRELEASE)' -a $(CONFIG_BOOT_LOAD) \
                    -e $(shell $(NM) vmlinux | awk '$$NF == "__start" {print $$1}') \
                    -d $< $@
 
diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig
index baec1337f28..dcfb4889559 100644
--- a/arch/blackfin/configs/BF518F-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig
@@ -326,11 +326,17 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -413,11 +419,11 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -916,7 +922,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_MMC_SDHCI is not set
 CONFIG_SDH_BFIN=m
 CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND=y
-CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ=y
+# CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ is not set
 # CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1147,7 +1153,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig
index c06262e41f7..48a3a7a9099 100644
--- a/arch/blackfin/configs/BF526-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF526-EZBRD_defconfig
@@ -331,16 +331,18 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
-# CONFIG_MPU is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
 
 #
-# Asynchonous Memory Configuration
+# Memory Protection Unit
 #
+# CONFIG_MPU is not set
 
 #
 # EBIU_AMGCTL Global Control
@@ -418,11 +420,11 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -1424,7 +1426,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index e9175c608aa..dd8352791da 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -331,11 +331,17 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -418,11 +424,11 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -1505,7 +1511,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 5aa63bafdd6..4c044805cb5 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -292,12 +292,21 @@ CONFIG_DMA_UNCACHED_1M=y
 #
 # Cache Support
 #
+#
+# Cache Support
+#
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -391,11 +400,11 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -1052,7 +1061,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index fed25329e13..c99bbcd09a6 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -293,11 +293,17 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -391,11 +397,11 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -1216,7 +1222,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index f9ac20d5579..092ffda80e6 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -300,11 +300,17 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -399,11 +405,11 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -1269,7 +1275,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig
index ee98e227b88..fa698a89f6f 100644
--- a/arch/blackfin/configs/BF538-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF538-EZKIT_defconfig
@@ -311,11 +311,17 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -398,11 +404,11 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -1203,7 +1209,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index deeabef8ab8..b3d3cab81cf 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -366,14 +366,19 @@ CONFIG_DMA_UNCACHED_2M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
-# CONFIG_BFIN_L2_WB is not set
-CONFIG_BFIN_L2_WT=y
-# CONFIG_BFIN_L2_NOT_CACHED is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+# CONFIG_BFIN_L2_ICACHEABLE is not set
+# CONFIG_BFIN_L2_DCACHEABLE is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -459,11 +464,11 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -1606,7 +1611,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index dcfbe2e2931..0313cd1d982 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -331,14 +331,19 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
-# CONFIG_BFIN_L2_WB is not set
-CONFIG_BFIN_L2_WT=y
-# CONFIG_BFIN_L2_NOT_CACHED is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+# CONFIG_BFIN_L2_ICACHEABLE is not set
+# CONFIG_BFIN_L2_DCACHEABLE is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -425,11 +430,11 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -1044,7 +1049,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig
index 174c578b8ec..5d944ffd4ab 100644
--- a/arch/blackfin/configs/BlackStamp_defconfig
+++ b/arch/blackfin/configs/BlackStamp_defconfig
@@ -285,11 +285,17 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
index e17875e8abe..648a31d01bf 100644
--- a/arch/blackfin/configs/CM-BF527_defconfig
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -329,11 +329,17 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -417,11 +423,11 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -1246,7 +1252,7 @@ CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig
index fafd95e84b2..ae665b93b87 100644
--- a/arch/blackfin/configs/CM-BF533_defconfig
+++ b/arch/blackfin/configs/CM-BF533_defconfig
@@ -262,12 +262,17 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
-CONFIG_L1_MAX_PIECE=16
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -353,10 +358,10 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -873,7 +878,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
diff --git a/arch/blackfin/configs/CM-BF537E_defconfig b/arch/blackfin/configs/CM-BF537E_defconfig
index e73aa5af58b..d74b6f4db35 100644
--- a/arch/blackfin/configs/CM-BF537E_defconfig
+++ b/arch/blackfin/configs/CM-BF537E_defconfig
@@ -297,11 +297,17 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -383,11 +389,11 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -861,7 +867,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_SECTION_MISMATCH=y
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 
diff --git a/arch/blackfin/configs/CM-BF537U_defconfig b/arch/blackfin/configs/CM-BF537U_defconfig
index 80211303f6b..7fc8dfa1719 100644
--- a/arch/blackfin/configs/CM-BF537U_defconfig
+++ b/arch/blackfin/configs/CM-BF537U_defconfig
@@ -270,12 +270,17 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
-CONFIG_L1_MAX_PIECE=16
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -361,10 +366,10 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -901,7 +906,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index dd815f0d151..acca4e51a45 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -333,12 +333,19 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
-CONFIG_L1_MAX_PIECE=16
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+# CONFIG_BFIN_L2_ICACHEABLE is not set
+# CONFIG_BFIN_L2_DCACHEABLE is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -428,11 +435,11 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -1334,7 +1341,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_SAMPLES is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig
index 16c198bd40c..bae4ee6e68b 100644
--- a/arch/blackfin/configs/CM-BF561_defconfig
+++ b/arch/blackfin/configs/CM-BF561_defconfig
@@ -308,12 +308,19 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
-CONFIG_L1_MAX_PIECE=16
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+# CONFIG_BFIN_L2_ICACHEABLE is not set
+# CONFIG_BFIN_L2_DCACHEABLE is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -395,11 +402,11 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -837,7 +844,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_SAMPLES is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig
index 6b4c1a98238..a6a7c8ede70 100644
--- a/arch/blackfin/configs/H8606_defconfig
+++ b/arch/blackfin/configs/H8606_defconfig
@@ -258,12 +258,18 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_ICACHE_LOCK=y
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
-CONFIG_L1_MAX_PIECE=16
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
+# CONFIG_MPU is not set
 
 #
 # Asynchonous Memory Configuration
diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig
index 09701f907e9..ff377fae061 100644
--- a/arch/blackfin/configs/PNAV-10_defconfig
+++ b/arch/blackfin/configs/PNAV-10_defconfig
@@ -295,11 +295,17 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -382,11 +388,11 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig
index ec84a53daae..814f9cacf40 100644
--- a/arch/blackfin/configs/SRV1_defconfig
+++ b/arch/blackfin/configs/SRV1_defconfig
@@ -279,12 +279,18 @@ CONFIG_DMA_UNCACHED_2M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
-CONFIG_L1_MAX_PIECE=16
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
+# CONFIG_MPU is not set
 
 #
 # Asynchonous Memory Configuration
diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig
index 6e2796240fd..375e75a27ab 100644
--- a/arch/blackfin/configs/TCM-BF537_defconfig
+++ b/arch/blackfin/configs/TCM-BF537_defconfig
@@ -287,11 +287,17 @@ CONFIG_DMA_UNCACHED_1M=y
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
 # CONFIG_MPU is not set
 
 #
@@ -709,7 +715,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
diff --git a/arch/blackfin/include/asm/atomic.h b/arch/blackfin/include/asm/atomic.h
index b1d92f13ef9..88f36d599fe 100644
--- a/arch/blackfin/include/asm/atomic.h
+++ b/arch/blackfin/include/asm/atomic.h
@@ -1,24 +1,21 @@
 #ifndef __ARCH_BLACKFIN_ATOMIC__
 #define __ARCH_BLACKFIN_ATOMIC__
 
+#ifndef CONFIG_SMP
+# include <asm-generic/atomic.h>
+#else
+
 #include <linux/types.h>
 #include <asm/system.h>	/* local_irq_XXX() */
 
 /*
  * Atomic operations that C can't guarantee us.  Useful for
  * resource counting etc..
- *
- * Generally we do not concern about SMP BFIN systems, so we don't have
- * to deal with that.
- *
- * Tony Kou (tonyko@lineo.ca)   Lineo Inc.   2001
  */
 
 #define ATOMIC_INIT(i)	{ (i) }
 #define atomic_set(v, i)	(((v)->counter) = i)
 
-#ifdef CONFIG_SMP
-
 #define atomic_read(v)	__raw_uncached_fetch_asm(&(v)->counter)
 
 asmlinkage int __raw_uncached_fetch_asm(const volatile int *ptr);
@@ -84,100 +81,6 @@ static inline int atomic_test_mask(int mask, atomic_t *v)
 #define smp_mb__before_atomic_inc()    barrier()
 #define smp_mb__after_atomic_inc() barrier()
 
-#else /* !CONFIG_SMP */
-
-#define atomic_read(v)	((v)->counter)
-
-static inline void atomic_add(int i, atomic_t *v)
-{
-	unsigned long flags;
-
-	local_irq_save_hw(flags);
-	v->counter += i;
-	local_irq_restore_hw(flags);
-}
-
-static inline void atomic_sub(int i, atomic_t *v)
-{
-	unsigned long flags;
-
-	local_irq_save_hw(flags);
-	v->counter -= i;
-	local_irq_restore_hw(flags);
-
-}
-
-static inline int atomic_add_return(int i, atomic_t *v)
-{
-	int __temp = 0;
-	unsigned long flags;
-
-	local_irq_save_hw(flags);
-	v->counter += i;
-	__temp = v->counter;
-	local_irq_restore_hw(flags);
-
-
-	return __temp;
-}
-
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
-	int __temp = 0;
-	unsigned long flags;
-
-	local_irq_save_hw(flags);
-	v->counter -= i;
-	__temp = v->counter;
-	local_irq_restore_hw(flags);
-
-	return __temp;
-}
-
-static inline void atomic_inc(volatile atomic_t *v)
-{
-	unsigned long flags;
-
-	local_irq_save_hw(flags);
-	v->counter++;
-	local_irq_restore_hw(flags);
-}
-
-static inline void atomic_dec(volatile atomic_t *v)
-{
-	unsigned long flags;
-
-	local_irq_save_hw(flags);
-	v->counter--;
-	local_irq_restore_hw(flags);
-}
-
-static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
-{
-	unsigned long flags;
-
-	local_irq_save_hw(flags);
-	v->counter &= ~mask;
-	local_irq_restore_hw(flags);
-}
-
-static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
-{
-	unsigned long flags;
-
-	local_irq_save_hw(flags);
-	v->counter |= mask;
-	local_irq_restore_hw(flags);
-}
-
-/* Atomic operations are already serializing */
-#define smp_mb__before_atomic_dec()    barrier()
-#define smp_mb__after_atomic_dec() barrier()
-#define smp_mb__before_atomic_inc()    barrier()
-#define smp_mb__after_atomic_inc() barrier()
-
-#endif /* !CONFIG_SMP */
-
 #define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
 #define atomic_dec_return(v) atomic_sub_return(1,(v))
 #define atomic_inc_return(v) atomic_add_return(1,(v))
@@ -210,4 +113,6 @@ static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
 
 #include <asm-generic/atomic-long.h>
 
-#endif				/* __ARCH_BLACKFIN_ATOMIC __ */
+#endif
+
+#endif
diff --git a/arch/blackfin/include/asm/auxvec.h b/arch/blackfin/include/asm/auxvec.h
index 215506cd87b..41fa68b7128 100644
--- a/arch/blackfin/include/asm/auxvec.h
+++ b/arch/blackfin/include/asm/auxvec.h
@@ -1,4 +1 @@
-#ifndef __ASMBFIN_AUXVEC_H
-#define __ASMBFIN_AUXVEC_H
-
-#endif
+#include <asm-generic/auxvec.h>
diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h
index 75fee2f7d9f..daffa71576d 100644
--- a/arch/blackfin/include/asm/bitops.h
+++ b/arch/blackfin/include/asm/bitops.h
@@ -1,26 +1,22 @@
 #ifndef _BLACKFIN_BITOPS_H
 #define _BLACKFIN_BITOPS_H
 
-/*
- * Copyright 1992, Linus Torvalds.
- */
-
-#include <linux/compiler.h>
-#include <asm/byteorder.h>	/* swab32 */
-
-#ifdef __KERNEL__
+#ifndef CONFIG_SMP
+# include <asm-generic/bitops.h>
+#else
 
 #ifndef _LINUX_BITOPS_H
 #error only <linux/bitops.h> can be included directly
 #endif
 
+#include <linux/compiler.h>
+#include <asm/byteorder.h>	/* swab32 */
+
 #include <asm-generic/bitops/ffs.h>
 #include <asm-generic/bitops/__ffs.h>
 #include <asm-generic/bitops/sched.h>
 #include <asm-generic/bitops/ffz.h>
 
-#ifdef CONFIG_SMP
-
 #include <linux/linkage.h>
 
 asmlinkage int __raw_bit_set_asm(volatile unsigned long *addr, int nr);
@@ -79,189 +75,13 @@ static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
 	return __raw_bit_test_toggle_asm(a, nr & 0x1f);
 }
 
-#else /* !CONFIG_SMP */
-
-#include <asm/system.h>		/* save_flags */
-
-static inline void set_bit(int nr, volatile unsigned long *addr)
-{
-	int *a = (int *)addr;
-	int mask;
-	unsigned long flags;
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-	local_irq_save_hw(flags);
-	*a |= mask;
-	local_irq_restore_hw(flags);
-}
-
-static inline void clear_bit(int nr, volatile unsigned long *addr)
-{
-	int *a = (int *)addr;
-	int mask;
-	unsigned long flags;
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-	local_irq_save_hw(flags);
-	*a &= ~mask;
-	local_irq_restore_hw(flags);
-}
-
-static inline void change_bit(int nr, volatile unsigned long *addr)
-{
-	int mask;
-	unsigned long flags;
-	unsigned long *ADDR = (unsigned long *)addr;
-
-	ADDR += nr >> 5;
-	mask = 1 << (nr & 31);
-	local_irq_save_hw(flags);
-	*ADDR ^= mask;
-	local_irq_restore_hw(flags);
-}
-
-static inline int test_and_set_bit(int nr, volatile unsigned long *addr)
-{
-	int mask, retval;
-	volatile unsigned int *a = (volatile unsigned int *)addr;
-	unsigned long flags;
-
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-	local_irq_save_hw(flags);
-	retval = (mask & *a) != 0;
-	*a |= mask;
-	local_irq_restore_hw(flags);
-
-	return retval;
-}
-
-static inline int test_and_clear_bit(int nr, volatile unsigned long *addr)
-{
-	int mask, retval;
-	volatile unsigned int *a = (volatile unsigned int *)addr;
-	unsigned long flags;
-
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-	local_irq_save_hw(flags);
-	retval = (mask & *a) != 0;
-	*a &= ~mask;
-	local_irq_restore_hw(flags);
-
-	return retval;
-}
-
-static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
-{
-	int mask, retval;
-	volatile unsigned int *a = (volatile unsigned int *)addr;
-	unsigned long flags;
-
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-	local_irq_save_hw(flags);
-	retval = (mask & *a) != 0;
-	*a ^= mask;
-	local_irq_restore_hw(flags);
-	return retval;
-}
-
-#endif /* CONFIG_SMP */
-
 /*
  * clear_bit() doesn't provide any barrier for the compiler.
  */
 #define smp_mb__before_clear_bit()	barrier()
 #define smp_mb__after_clear_bit()	barrier()
 
-static inline void __set_bit(int nr, volatile unsigned long *addr)
-{
-	int *a = (int *)addr;
-	int mask;
-
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-	*a |= mask;
-}
-
-static inline void __clear_bit(int nr, volatile unsigned long *addr)
-{
-	int *a = (int *)addr;
-	int mask;
-
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-	*a &= ~mask;
-}
-
-static inline void __change_bit(int nr, volatile unsigned long *addr)
-{
-	int mask;
-	unsigned long *ADDR = (unsigned long *)addr;
-
-	ADDR += nr >> 5;
-	mask = 1 << (nr & 31);
-	*ADDR ^= mask;
-}
-
-static inline int __test_and_set_bit(int nr, volatile unsigned long *addr)
-{
-	int mask, retval;
-	volatile unsigned int *a = (volatile unsigned int *)addr;
-
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-	retval = (mask & *a) != 0;
-	*a |= mask;
-	return retval;
-}
-
-static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr)
-{
-	int mask, retval;
-	volatile unsigned int *a = (volatile unsigned int *)addr;
-
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-	retval = (mask & *a) != 0;
-	*a &= ~mask;
-	return retval;
-}
-
-static inline int __test_and_change_bit(int nr,
-					    volatile unsigned long *addr)
-{
-	int mask, retval;
-	volatile unsigned int *a = (volatile unsigned int *)addr;
-
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-	retval = (mask & *a) != 0;
-	*a ^= mask;
-	return retval;
-}
-
-static inline int __test_bit(int nr, const void *addr)
-{
-	int *a = (int *)addr;
-	int mask;
-
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-	return ((mask & *a) != 0);
-}
-
-#ifndef CONFIG_SMP
-/*
- * This routine doesn't need irq save and restore ops in UP
- * context.
- */
-static inline int test_bit(int nr, const void *addr)
-{
-	return __test_bit(nr, addr);
-}
-#endif
+#include <asm-generic/bitops/non-atomic.h>
 
 #include <asm-generic/bitops/find.h>
 #include <asm-generic/bitops/hweight.h>
@@ -272,10 +92,10 @@ static inline int test_bit(int nr, const void *addr)
 
 #include <asm-generic/bitops/minix.h>
 
-#endif				/* __KERNEL__ */
-
 #include <asm-generic/bitops/fls.h>
 #include <asm-generic/bitops/__fls.h>
 #include <asm-generic/bitops/fls64.h>
 
+#endif /* CONFIG_SMP */
+
 #endif				/* _BLACKFIN_BITOPS_H */
diff --git a/arch/blackfin/include/asm/blackfin.h b/arch/blackfin/include/asm/blackfin.h
index 8bb2cb13975..4d443958339 100644
--- a/arch/blackfin/include/asm/blackfin.h
+++ b/arch/blackfin/include/asm/blackfin.h
@@ -86,6 +86,7 @@ static inline void CSYNC(void)
 
 #endif /* __ASSEMBLY__ */
 
+#include <asm/mem_map.h>
 #include <mach/blackfin.h>
 #include <asm/bfin-global.h>
 
diff --git a/arch/blackfin/include/asm/bugs.h b/arch/blackfin/include/asm/bugs.h
index 9093c9c1fb8..61791e1ad9f 100644
--- a/arch/blackfin/include/asm/bugs.h
+++ b/arch/blackfin/include/asm/bugs.h
@@ -1,16 +1 @@
-/*
- *  include/asm-blackfin/bugs.h
- *
- *  Copyright (C) 1994  Linus Torvalds
- */
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- *	void check_bugs(void);
- */
-
-static void check_bugs(void)
-{
-}
+#include <asm-generic/bugs.h>
diff --git a/arch/blackfin/include/asm/cache.h b/arch/blackfin/include/asm/cache.h
index 2ef669ed922..477050ad5c5 100644
--- a/arch/blackfin/include/asm/cache.h
+++ b/arch/blackfin/include/asm/cache.h
@@ -35,10 +35,10 @@
 
 #if defined(CONFIG_SMP) && \
     !defined(CONFIG_BFIN_CACHE_COHERENT)
-# if defined(CONFIG_BFIN_ICACHE)
+# if defined(CONFIG_BFIN_ICACHEABLE) || defined(CONFIG_BFIN_L2_ICACHEABLE)
 # define __ARCH_SYNC_CORE_ICACHE
 # endif
-# if defined(CONFIG_BFIN_DCACHE)
+# if defined(CONFIG_BFIN_DCACHEABLE) || defined(CONFIG_BFIN_L2_DCACHEABLE)
 # define __ARCH_SYNC_CORE_DCACHE
 # endif
 #ifndef __ASSEMBLY__
diff --git a/arch/blackfin/include/asm/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h
index 5c17dee53b5..7e55549e180 100644
--- a/arch/blackfin/include/asm/cacheflush.h
+++ b/arch/blackfin/include/asm/cacheflush.h
@@ -56,7 +56,7 @@ extern void blackfin_invalidate_entire_icache(void);
 
 static inline void flush_icache_range(unsigned start, unsigned end)
 {
-#if defined(CONFIG_BFIN_WB)
+#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
 	blackfin_dcache_flush_range(start, end);
 #endif
 
@@ -87,9 +87,9 @@ do { memcpy(dst, src, len);						\
 #else
 # define invalidate_dcache_range(start,end)	do { } while (0)
 #endif
-#if defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_WB)
+#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
 # define flush_dcache_range(start,end)		blackfin_dcache_flush_range((start), (end))
-# define flush_dcache_page(page)			blackfin_dflush_page(page_address(page))
+# define flush_dcache_page(page)		blackfin_dflush_page(page_address(page))
 #else
 # define flush_dcache_range(start,end)		do { } while (0)
 # define flush_dcache_page(page)		do { } while (0)
@@ -100,7 +100,7 @@ extern unsigned long reserved_mem_icache_on;
 
 static inline int bfin_addr_dcacheable(unsigned long addr)
 {
-#ifdef CONFIG_BFIN_DCACHE
+#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE
 	if (addr < (_ramend - DMA_UNCACHED_REGION))
 		return 1;
 #endif
@@ -109,7 +109,7 @@ static inline int bfin_addr_dcacheable(unsigned long addr)
 		addr >= _ramend && addr < physical_mem_end)
 		return 1;
 
-#ifndef CONFIG_BFIN_L2_NOT_CACHED
+#ifdef CONFIG_BFIN_L2_DCACHEABLE
 	if (addr >= L2_START && addr < L2_START + L2_LENGTH)
 		return 1;
 #endif
diff --git a/arch/blackfin/include/asm/cplb.h b/arch/blackfin/include/asm/cplb.h
index a75a6a9f094..c5dacf8f8cf 100644
--- a/arch/blackfin/include/asm/cplb.h
+++ b/arch/blackfin/include/asm/cplb.h
@@ -37,8 +37,6 @@
 #define L1_IMEMORY        (               CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
 #define SDRAM_INON_CHBL   (               CPLB_USER_RD | CPLB_VALID)
 
-/*Use the menuconfig cache policy here - CONFIG_BFIN_WT/CONFIG_BFIN_WB*/
-
 #if ANOMALY_05000158
 #define ANOMALY_05000158_WORKAROUND             0x200
 #else
@@ -47,10 +45,12 @@
 
 #define CPLB_COMMON	(CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND)
 
-#ifdef CONFIG_BFIN_WB         /*Write Back Policy */
+#ifdef CONFIG_BFIN_EXTMEM_WRITEBACK
 #define SDRAM_DGENERIC   (CPLB_L1_CHBL | CPLB_COMMON)
-#else                           /*Write Through */
+#elif defined(CONFIG_BFIN_EXTMEM_WRITETHROUGH)
 #define SDRAM_DGENERIC   (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW  | CPLB_COMMON)
+#else
+#define SDRAM_DGENERIC   (CPLB_COMMON)
 #endif
 
 #define SDRAM_DNON_CHBL  (CPLB_COMMON)
@@ -61,21 +61,23 @@
 
 #ifdef CONFIG_SMP
 #define L2_ATTR          (INITIAL_T | I_CPLB | D_CPLB)
-#define L2_IMEMORY       (CPLB_COMMON)
-#define L2_DMEMORY       (CPLB_LOCK | CPLB_COMMON)
+#define L2_IMEMORY       (CPLB_COMMON | PAGE_SIZE_1MB)
+#define L2_DMEMORY       (CPLB_LOCK | CPLB_COMMON | PAGE_SIZE_1MB)
 
 #else
 #define L2_ATTR          (INITIAL_T | SWITCH_T | I_CPLB | D_CPLB)
-#define L2_IMEMORY       (SDRAM_IGENERIC)
-
-# if defined(CONFIG_BFIN_L2_WB)
-# define L2_DMEMORY      (CPLB_L1_CHBL | CPLB_COMMON)
-# elif defined(CONFIG_BFIN_L2_WT)
-# define L2_DMEMORY      (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW  | CPLB_COMMON)
-# elif defined(CONFIG_BFIN_L2_NOT_CACHED)
-# define L2_DMEMORY      (CPLB_COMMON)
+# if defined(CONFIG_BFIN_L2_ICACHEABLE)
+# define L2_IMEMORY      (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | PAGE_SIZE_1MB)
+# else
+# define L2_IMEMORY      (               CPLB_USER_RD | CPLB_VALID | PAGE_SIZE_1MB)
+# endif
+
+# if defined(CONFIG_BFIN_L2_WRITEBACK)
+# define L2_DMEMORY      (CPLB_L1_CHBL | CPLB_COMMON | PAGE_SIZE_1MB)
+# elif defined(CONFIG_BFIN_L2_WRITETHROUGH)
+# define L2_DMEMORY      (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_COMMON | PAGE_SIZE_1MB)
 # else
-# define L2_DMEMORY      (0)
+# define L2_DMEMORY      (CPLB_COMMON | PAGE_SIZE_1MB)
 # endif
 #endif /* CONFIG_SMP */
 
diff --git a/arch/blackfin/include/asm/cputime.h b/arch/blackfin/include/asm/cputime.h
index 2b19705f988..6d68ad7e0ea 100644
--- a/arch/blackfin/include/asm/cputime.h
+++ b/arch/blackfin/include/asm/cputime.h
@@ -1,6 +1 @@
-#ifndef __BLACKFIN_CPUTIME_H
-#define __BLACKFIN_CPUTIME_H
-
 #include <asm-generic/cputime.h>
-
-#endif				/* __BLACKFIN_CPUTIME_H */
diff --git a/arch/blackfin/include/asm/current.h b/arch/blackfin/include/asm/current.h
index 31918d29122..4c51401b553 100644
--- a/arch/blackfin/include/asm/current.h
+++ b/arch/blackfin/include/asm/current.h
@@ -1,23 +1 @@
-#ifndef _BLACKFIN_CURRENT_H
-#define _BLACKFIN_CURRENT_H
-/*
- *	current.h
- *	(C) Copyright 2000, Lineo, David McCullough <davidm@lineo.com>
- *
- *	rather than dedicate a register (as the m68k source does), we
- *	just keep a global,  we should probably just change it all to be
- *	current and lose _current_task.
- */
-#include <linux/thread_info.h>
-
-struct task_struct;
-
-static inline struct task_struct *get_current(void) __attribute__ ((__const__));
-static inline struct task_struct *get_current(void)
-{
-	return (current_thread_info()->task);
-}
-
-#define	current	(get_current())
-
-#endif				/* _BLACKFIN_CURRENT_H */
+#include <asm-generic/current.h>
diff --git a/arch/blackfin/include/asm/device.h b/arch/blackfin/include/asm/device.h
index d8f9872b0e2..f0a4c256403 100644
--- a/arch/blackfin/include/asm/device.h
+++ b/arch/blackfin/include/asm/device.h
@@ -1,7 +1 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
 #include <asm-generic/device.h>
-
diff --git a/arch/blackfin/include/asm/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h
index d7d9148e433..ed6b1f3cccc 100644
--- a/arch/blackfin/include/asm/dma-mapping.h
+++ b/arch/blackfin/include/asm/dma-mapping.h
@@ -95,4 +95,17 @@ static inline void dma_sync_single_for_device(struct device *dev,
 					enum dma_data_direction dir)
 {
 }
+
+static inline void dma_sync_sg_for_cpu(struct device *dev,
+					struct scatterlist *sg,
+					int nents, enum dma_data_direction dir)
+{
+}
+
+static inline void dma_sync_sg_for_device(struct device *dev,
+					struct scatterlist *sg,
+					int nents, enum dma_data_direction dir)
+{
+}
+
 #endif				/* _BLACKFIN_DMA_MAPPING_H */
diff --git a/arch/blackfin/include/asm/elf.h b/arch/blackfin/include/asm/elf.h
index 230e1605d3f..5a87baf0659 100644
--- a/arch/blackfin/include/asm/elf.h
+++ b/arch/blackfin/include/asm/elf.h
@@ -20,7 +20,7 @@
 
 typedef unsigned long elf_greg_t;
 
-#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
+#define ELF_NGREG 40 /* (sizeof(struct user_regs_struct) / sizeof(elf_greg_t)) */
 typedef elf_greg_t elf_gregset_t[ELF_NGREG];
 
 typedef struct user_bfinfp_struct elf_fpregset_t;
diff --git a/arch/blackfin/include/asm/emergency-restart.h b/arch/blackfin/include/asm/emergency-restart.h
index 27f6c785d10..3711bd9d50b 100644
--- a/arch/blackfin/include/asm/emergency-restart.h
+++ b/arch/blackfin/include/asm/emergency-restart.h
@@ -1,6 +1 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
 #include <asm-generic/emergency-restart.h>
-
-#endif				/* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/blackfin/include/asm/errno.h b/arch/blackfin/include/asm/errno.h
index 164e4f39bb5..4c82b503d92 100644
--- a/arch/blackfin/include/asm/errno.h
+++ b/arch/blackfin/include/asm/errno.h
@@ -1,6 +1 @@
-#ifndef _BFIN_ERRNO_H
-#define _BFIN_ERRNO_H
-
-#include<asm-generic/errno.h>
-
-#endif				/* _BFIN_ERRNO_H */
+#include <asm-generic/errno.h>
diff --git a/arch/blackfin/include/asm/fb.h b/arch/blackfin/include/asm/fb.h
index c7df3803099..3a4988e8df4 100644
--- a/arch/blackfin/include/asm/fb.h
+++ b/arch/blackfin/include/asm/fb.h
@@ -1,12 +1 @@
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-#include <linux/fb.h>
-
-#define fb_pgprotect(...) do {} while (0)
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
-	return 0;
-}
-
-#endif /* _ASM_FB_H_ */
+#include <asm-generic/fb.h>
diff --git a/arch/blackfin/include/asm/futex.h b/arch/blackfin/include/asm/futex.h
index 6a332a9f099..0b745828f42 100644
--- a/arch/blackfin/include/asm/futex.h
+++ b/arch/blackfin/include/asm/futex.h
@@ -1,6 +1 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
-
 #include <asm-generic/futex.h>
-
-#endif
diff --git a/arch/blackfin/include/asm/hardirq.h b/arch/blackfin/include/asm/hardirq.h
index 717181a1749..cbd52f86bb9 100644
--- a/arch/blackfin/include/asm/hardirq.h
+++ b/arch/blackfin/include/asm/hardirq.h
@@ -1,47 +1,11 @@
 #ifndef __BFIN_HARDIRQ_H
 #define __BFIN_HARDIRQ_H
 
-#include <linux/cache.h>
-#include <linux/threads.h>
-#include <asm/irq.h>
-
-typedef struct {
-	unsigned int __softirq_pending;
-	unsigned int __syscall_count;
-	struct task_struct *__ksoftirqd_task;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
-
-/*
- * We put the hardirq and softirq counter into the preemption
- * counter. The bitmask has the following meaning:
- *
- * - bits 0-7 are the preemption count (max preemption depth: 256)
- * - bits 8-15 are the softirq count (max # of softirqs: 256)
- * - bits 16-23 are the hardirq count (max # of hardirqs: 256)
- *
- * - ( bit 26 is the PREEMPT_ACTIVE flag. )
- *
- * PREEMPT_MASK: 0x000000ff
- * HARDIRQ_MASK: 0x0000ff00
- * SOFTIRQ_MASK: 0x00ff0000
- */
-
-#if NR_IRQS > 256
-#define HARDIRQ_BITS	9
-#else
-#define HARDIRQ_BITS	8
-#endif
-
-#ifdef NR_IRQS
-# if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-# endif
-#endif
-
 #define __ARCH_IRQ_EXIT_IRQS_DISABLED	1
 
 extern void ack_bad_irq(unsigned int irq);
+#define ack_bad_irq ack_bad_irq
+
+#include <asm-generic/hardirq.h>
 
 #endif
diff --git a/arch/blackfin/include/asm/hw_irq.h b/arch/blackfin/include/asm/hw_irq.h
index 5b51eaec012..1f5ef7da004 100644
--- a/arch/blackfin/include/asm/hw_irq.h
+++ b/arch/blackfin/include/asm/hw_irq.h
@@ -1,6 +1 @@
-#ifndef __ASM_BFIN_HW_IRQ_H
-#define __ASM_BFIN_HW_IRQ_H
-
-/* Dummy include. */
-
-#endif
+#include <asm-generic/hw_irq.h>
diff --git a/arch/blackfin/include/asm/io.h b/arch/blackfin/include/asm/io.h
index 3022b5c96b3..37053eca200 100644
--- a/arch/blackfin/include/asm/io.h
+++ b/arch/blackfin/include/asm/io.h
@@ -222,7 +222,6 @@ extern void blkfin_inv_cache_all(void);
 #define	ioport_unmap(addr)
 
 /* Pages to physical address... */
-#define page_to_phys(page)      ((page - mem_map) << PAGE_SHIFT)
 #define page_to_bus(page)       ((page - mem_map) << PAGE_SHIFT)
 
 #define phys_to_virt(vaddr)	((void *) (vaddr))
diff --git a/arch/blackfin/include/asm/ioctls.h b/arch/blackfin/include/asm/ioctls.h
index 895e3173165..eca8d75b0a8 100644
--- a/arch/blackfin/include/asm/ioctls.h
+++ b/arch/blackfin/include/asm/ioctls.h
@@ -1,87 +1,7 @@
 #ifndef __ARCH_BFIN_IOCTLS_H__
 #define __ARCH_BFIN_IOCTLS_H__
 
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS		0x5401
-#define TCSETS		0x5402
-#define TCSETSW		0x5403
-#define TCSETSF		0x5404
-#define TCGETA		0x5405
-#define TCSETA		0x5406
-#define TCSETAW		0x5407
-#define TCSETAF		0x5408
-#define TCSBRK		0x5409
-#define TCXONC		0x540A
-#define TCFLSH		0x540B
-#define TIOCEXCL	0x540C
-#define TIOCNXCL	0x540D
-#define TIOCSCTTY	0x540E
-#define TIOCGPGRP	0x540F
-#define TIOCSPGRP	0x5410
-#define TIOCOUTQ	0x5411
-#define TIOCSTI		0x5412
-#define TIOCGWINSZ	0x5413
-#define TIOCSWINSZ	0x5414
-#define TIOCMGET	0x5415
-#define TIOCMBIS	0x5416
-#define TIOCMBIC	0x5417
-#define TIOCMSET	0x5418
-#define TIOCGSOFTCAR	0x5419
-#define TIOCSSOFTCAR	0x541A
-#define FIONREAD	0x541B
-#define TIOCINQ		FIONREAD
-#define TIOCLINUX	0x541C
-#define TIOCCONS	0x541D
-#define TIOCGSERIAL	0x541E
-#define TIOCSSERIAL	0x541F
-#define TIOCPKT		0x5420
-#define FIONBIO		0x5421
-#define TIOCNOTTY	0x5422
-#define TIOCSETD	0x5423
-#define TIOCGETD	0x5424
-#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
-#define TIOCTTYGSTRUCT	0x5426	/* For debugging only */
-#define TIOCSBRK	0x5427	/* BSD compatibility */
-#define TIOCCBRK	0x5428	/* BSD compatibility */
-#define TIOCGSID	0x5429	/* Return the session ID of FD */
-#define TCGETS2		_IOR('T', 0x2A, struct termios2)
-#define TCSETS2		_IOW('T', 0x2B, struct termios2)
-#define TCSETSW2	_IOW('T', 0x2C, struct termios2)
-#define TCSETSF2	_IOW('T', 0x2D, struct termios2)
-/* Get Pty Number (of pty-mux device) */
-#define TIOCGPTN	_IOR('T', 0x30, unsigned int)
-#define TIOCSPTLCK	_IOW('T', 0x31, int)	/* Lock/unlock Pty */
-
-#define FIONCLEX	0x5450	/* these numbers need to be adjusted. */
-#define FIOCLEX		0x5451
-#define FIOASYNC	0x5452
-#define TIOCSERCONFIG	0x5453
-#define TIOCSERGWILD	0x5454
-#define TIOCSERSWILD	0x5455
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
-#define TIOCSERGSTRUCT	0x5458	/* For debugging only */
-#define TIOCSERGETLSR   0x5459	/* Get line status register */
-#define TIOCSERGETMULTI 0x545A	/* Get multiport config  */
-#define TIOCSERSETMULTI 0x545B	/* Set multiport config */
-
-#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-
 #define FIOQSIZE	0x545E
+#include <asm-generic/ioctls.h>
 
-/* Used for packet mode */
-#define TIOCPKT_DATA		 0
-#define TIOCPKT_FLUSHREAD	 1
-#define TIOCPKT_FLUSHWRITE	 2
-#define TIOCPKT_STOP		 4
-#define TIOCPKT_START		 8
-#define TIOCPKT_NOSTOP		16
-#define TIOCPKT_DOSTOP		32
-
-#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
-
-#endif				/* __ARCH_BFIN_IOCTLS_H__ */
+#endif
diff --git a/arch/blackfin/include/asm/ipcbuf.h b/arch/blackfin/include/asm/ipcbuf.h
index 8f0899cdf4d..84c7e51cb6d 100644
--- a/arch/blackfin/include/asm/ipcbuf.h
+++ b/arch/blackfin/include/asm/ipcbuf.h
@@ -1,30 +1 @@
-/* Changes origined from m68k version.    Lineo Inc.  May 2001   */
-
-#ifndef __BFIN_IPCBUF_H__
-#define __BFIN_IPCBUF_H__
-
-/*
- * The user_ipc_perm structure for m68k architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm {
-	__kernel_key_t key;
-	__kernel_uid32_t uid;
-	__kernel_gid32_t gid;
-	__kernel_uid32_t cuid;
-	__kernel_gid32_t cgid;
-	__kernel_mode_t mode;
-	unsigned short __pad1;
-	unsigned short seq;
-	unsigned short __pad2;
-	unsigned long __unused1;
-	unsigned long __unused2;
-};
-
-#endif				/* __BFIN_IPCBUF_H__ */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/blackfin/include/asm/ipipe.h b/arch/blackfin/include/asm/ipipe.h
index bbe1c3726b6..87ba9ad399c 100644
--- a/arch/blackfin/include/asm/ipipe.h
+++ b/arch/blackfin/include/asm/ipipe.h
@@ -35,9 +35,9 @@
 #include <asm/atomic.h>
 #include <asm/traps.h>
 
-#define IPIPE_ARCH_STRING     "1.10-00"
+#define IPIPE_ARCH_STRING     "1.11-00"
 #define IPIPE_MAJOR_NUMBER    1
-#define IPIPE_MINOR_NUMBER    10
+#define IPIPE_MINOR_NUMBER    11
 #define IPIPE_PATCH_NUMBER    0
 
 #ifdef CONFIG_SMP
@@ -207,7 +207,7 @@ void ipipe_init_irq_threads(void);
 
 int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
 
-#ifdef CONFIG_GENERIC_CLOCKEVENTS
+#ifdef CONFIG_TICKSOURCE_CORETMR
 #define IRQ_SYSTMR		IRQ_CORETMR
 #define IRQ_PRIOTMR		IRQ_CORETMR
 #else
@@ -240,8 +240,13 @@ int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
 #define ipipe_init_irq_threads()		do { } while (0)
 #define ipipe_start_irq_thread(irq, desc)	0
 
+#ifndef CONFIG_TICKSOURCE_GPTMR0
 #define IRQ_SYSTMR		IRQ_CORETMR
 #define IRQ_PRIOTMR		IRQ_CORETMR
+#else
+#define IRQ_SYSTMR		IRQ_TIMER0
+#define IRQ_PRIOTMR		CONFIG_IRQ_TIMER0
+#endif
 
 #define __ipipe_root_tick_p(regs)	1
 
diff --git a/arch/blackfin/include/asm/ipipe_base.h b/arch/blackfin/include/asm/ipipe_base.h
index 3e8acbd1a3b..490098f532a 100644
--- a/arch/blackfin/include/asm/ipipe_base.h
+++ b/arch/blackfin/include/asm/ipipe_base.h
@@ -51,23 +51,23 @@
 
 extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */
 
-static inline void __ipipe_stall_root(void)
-{
-	volatile unsigned long *p = &__ipipe_root_status;
-	set_bit(0, p);
-}
+#define __ipipe_stall_root()						\
+	do {								\
+		volatile unsigned long *p = &__ipipe_root_status;	\
+		set_bit(0, p);						\
+	} while (0)
 
-static inline unsigned long __ipipe_test_and_stall_root(void)
-{
-	volatile unsigned long *p = &__ipipe_root_status;
-	return test_and_set_bit(0, p);
-}
+#define __ipipe_test_and_stall_root()					\
+	({								\
+		volatile unsigned long *p = &__ipipe_root_status;	\
+		test_and_set_bit(0, p);					\
+	})
 
-static inline unsigned long __ipipe_test_root(void)
-{
-	const unsigned long *p = &__ipipe_root_status;
-	return test_bit(0, p);
-}
+#define __ipipe_test_root()					\
+	({							\
+		const unsigned long *p = &__ipipe_root_status;	\
+		test_bit(0, p);					\
+	})
 
 #endif /* !__ASSEMBLY__ */
 
diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h
index 400bdd52ce8..42a15f5ce0d 100644
--- a/arch/blackfin/include/asm/irq.h
+++ b/arch/blackfin/include/asm/irq.h
@@ -22,13 +22,6 @@
 /* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h> */
 #include <mach/irq.h>
 
-/* Xenomai IPIPE helpers */
-#define local_irq_restore_hw(x) local_irq_restore(x)
-#define local_irq_save_hw(x)    local_irq_save(x)
-#define local_irq_enable_hw(x)  local_irq_enable(x)
-#define local_irq_disable_hw(x) local_irq_disable(x)
-#define irqs_disabled_hw(x)     irqs_disabled(x)
-
 #if ANOMALY_05000244 && defined(CONFIG_BFIN_ICACHE)
 # define NOP_PAD_ANOMALY_05000244 "nop; nop;"
 #else
@@ -45,9 +38,6 @@
 		: "d" (bfin_irq_flags) \
 	)
 
-static inline int irq_canonicalize(int irq)
-{
-	return irq;
-}
+#include <asm-generic/irq.h>
 
 #endif				/* _BFIN_IRQ_H_ */
diff --git a/arch/blackfin/include/asm/irqflags.h b/arch/blackfin/include/asm/irqflags.h
index 139cba4651b..9b19a19d9ae 100644
--- a/arch/blackfin/include/asm/irqflags.h
+++ b/arch/blackfin/include/asm/irqflags.h
@@ -31,6 +31,150 @@ static inline unsigned long bfin_cli(void)
 	return flags;
 }
 
+#ifdef CONFIG_IPIPE
+
+#include <linux/ipipe_base.h>
+#include <linux/ipipe_trace.h>
+
+#ifdef CONFIG_DEBUG_HWERR
+# define bfin_no_irqs 0x3f
+#else
+# define bfin_no_irqs 0x1f
+#endif
+
+#define raw_local_irq_disable()				\
+	do {						\
+		ipipe_check_context(ipipe_root_domain);	\
+		__ipipe_stall_root();			\
+		barrier();				\
+	} while (0)
+
+static inline void raw_local_irq_enable(void)
+{
+	barrier();
+	ipipe_check_context(ipipe_root_domain);
+	__ipipe_unstall_root();
+}
+
+#define raw_local_save_flags_ptr(x)					\
+	do {								\
+		*(x) = __ipipe_test_root() ? bfin_no_irqs : bfin_irq_flags; \
+	} while (0)
+
+#define raw_local_save_flags(x)		raw_local_save_flags_ptr(&(x))
+
+#define raw_irqs_disabled_flags(x)	((x) == bfin_no_irqs)
+
+#define raw_local_irq_save_ptr(x)					\
+	do {								\
+		*(x) = __ipipe_test_and_stall_root() ? bfin_no_irqs : bfin_irq_flags; \
+		barrier();						\
+	} while (0)
+
+#define raw_local_irq_save(x)				\
+	do {						\
+		ipipe_check_context(ipipe_root_domain);	\
+		raw_local_irq_save_ptr(&(x));		\
+	} while (0)
+
+static inline unsigned long raw_mangle_irq_bits(int virt, unsigned long real)
+{
+	/*
+	 * Merge virtual and real interrupt mask bits into a single
+	 * 32bit word.
+	 */
+	return (real & ~(1 << 31)) | ((virt != 0) << 31);
+}
+
+static inline int raw_demangle_irq_bits(unsigned long *x)
+{
+	int virt = (*x & (1 << 31)) != 0;
+	*x &= ~(1L << 31);
+	return virt;
+}
+
+static inline void local_irq_disable_hw_notrace(void)
+{
+	bfin_cli();
+}
+
+static inline void local_irq_enable_hw_notrace(void)
+{
+	bfin_sti(bfin_irq_flags);
+}
+
+#define local_save_flags_hw(flags)			\
+	do {						\
+		(flags) = bfin_read_IMASK();		\
+	} while (0)
+
+#define irqs_disabled_flags_hw(flags) (((flags) & ~0x3f) == 0)
+
+#define irqs_disabled_hw()			\
+	({					\
+	unsigned long flags;			\
+	local_save_flags_hw(flags);		\
+	irqs_disabled_flags_hw(flags);		\
+	})
+
+static inline void local_irq_save_ptr_hw(unsigned long *flags)
+{
+	*flags = bfin_cli();
+#ifdef CONFIG_DEBUG_HWERR
+	bfin_sti(0x3f);
+#endif
+}
+
+#define local_irq_save_hw_notrace(flags)		\
+	do {						\
+		local_irq_save_ptr_hw(&(flags));	\
+	} while (0)
+
+static inline void local_irq_restore_hw_notrace(unsigned long flags)
+{
+	if (!irqs_disabled_flags_hw(flags))
+		local_irq_enable_hw_notrace();
+}
+
+#ifdef CONFIG_IPIPE_TRACE_IRQSOFF
+# define local_irq_disable_hw()				\
+	do {						\
+		if (!irqs_disabled_hw()) {		\
+			local_irq_disable_hw_notrace();	\
+			ipipe_trace_begin(0x80000000);	\
+		}					\
+	} while (0)
+# define local_irq_enable_hw()				\
+	do {						\
+		if (irqs_disabled_hw()) {		\
+			ipipe_trace_end(0x80000000);	\
+			local_irq_enable_hw_notrace();	\
+		}					\
+	} while (0)
+# define local_irq_save_hw(flags)			\
+	do {						\
+		local_save_flags_hw(flags);		\
+		if (!irqs_disabled_flags_hw(flags)) {	\
+			local_irq_disable_hw_notrace();	\
+			ipipe_trace_begin(0x80000001);	\
+		}					\
+	} while (0)
+# define local_irq_restore_hw(flags)			\
+	do {						\
+		if (!irqs_disabled_flags_hw(flags)) {	\
+			ipipe_trace_end(0x80000001);	\
+			local_irq_enable_hw_notrace();	\
+		}					\
+	} while (0)
+#else /* !CONFIG_IPIPE_TRACE_IRQSOFF */
+# define local_irq_disable_hw()		local_irq_disable_hw_notrace()
+# define local_irq_enable_hw()		local_irq_enable_hw_notrace()
+# define local_irq_save_hw(flags)	local_irq_save_hw_notrace(flags)
+# define local_irq_restore_hw(flags)	local_irq_restore_hw_notrace(flags)
+#endif /* !CONFIG_IPIPE_TRACE_IRQSOFF */
+
+#else /* CONFIG_IPIPE */
+
 static inline void raw_local_irq_disable(void)
 {
 	bfin_cli();
@@ -44,12 +188,6 @@ static inline void raw_local_irq_enable(void)
 
 #define raw_irqs_disabled_flags(flags) (((flags) & ~0x3f) == 0)
 
-static inline void raw_local_irq_restore(unsigned long flags)
-{
-	if (!raw_irqs_disabled_flags(flags))
-		raw_local_irq_enable();
-}
-
 static inline unsigned long __raw_local_irq_save(void)
 {
 	unsigned long flags = bfin_cli();
@@ -60,4 +198,18 @@ static inline unsigned long __raw_local_irq_save(void)
 }
 #define raw_local_irq_save(flags) do { (flags) = __raw_local_irq_save(); } while (0)
 
+#define local_irq_save_hw(flags)	raw_local_irq_save(flags)
+#define local_irq_restore_hw(flags)	raw_local_irq_restore(flags)
+#define local_irq_enable_hw()		raw_local_irq_enable()
+#define local_irq_disable_hw()		raw_local_irq_disable()
+#define irqs_disabled_hw()		irqs_disabled()
+
+#endif /* !CONFIG_IPIPE */
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+	if (!raw_irqs_disabled_flags(flags))
+		raw_local_irq_enable();
+}
+
 #endif
diff --git a/arch/blackfin/include/asm/kmap_types.h b/arch/blackfin/include/asm/kmap_types.h
index 0a88622339e..3575c64af42 100644
--- a/arch/blackfin/include/asm/kmap_types.h
+++ b/arch/blackfin/include/asm/kmap_types.h
@@ -1,6 +1 @@
-#ifndef _ASM_KMAP_TYPES_H
-#define _ASM_KMAP_TYPES_H
-
 #include <asm-generic/kmap_types.h>
-
-#endif
diff --git a/arch/blackfin/include/asm/local.h b/arch/blackfin/include/asm/local.h
index 75afffbc642..c11c530f74d 100644
--- a/arch/blackfin/include/asm/local.h
+++ b/arch/blackfin/include/asm/local.h
@@ -1,6 +1 @@
-#ifndef __BLACKFIN_LOCAL_H
-#define __BLACKFIN_LOCAL_H
-
 #include <asm-generic/local.h>
-
-#endif				/* __BLACKFIN_LOCAL_H */
diff --git a/arch/blackfin/include/asm/mem_init.h b/arch/blackfin/include/asm/mem_init.h
index 61f7487fbf1..4179e329b9c 100644
--- a/arch/blackfin/include/asm/mem_init.h
+++ b/arch/blackfin/include/asm/mem_init.h
@@ -59,7 +59,7 @@
 #define SDRAM_tRP       TRP_1
 #define SDRAM_tRP_num   1
 #define SDRAM_tRAS      TRAS_4
-#define SDRAM_tRAS_num  3
+#define SDRAM_tRAS_num  4
 #define SDRAM_tRCD      TRCD_1
 #define SDRAM_tWR       TWR_2
 #endif
@@ -89,6 +89,85 @@
 #endif
 #endif
 
+/*
+ * The BF526-EZ-Board changed SDRAM chips between revisions,
+ * so we use below timings to accommodate both.
+ */
+#if defined(CONFIG_MEM_MT48H32M16LFCJ_75)
+#if (CONFIG_SCLK_HZ > 119402985)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_8
+#define SDRAM_tRAS_num  8
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_7
+#define SDRAM_tRAS_num  7
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_6
+#define SDRAM_tRAS_num  6
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_5
+#define SDRAM_tRAS_num  5
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_4
+#define SDRAM_tRAS_num  4
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_4
+#define SDRAM_tRAS_num  4
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_3
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_3
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ <= 29850746)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_2
+#define SDRAM_tRAS_num  2
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#endif
+
 #if defined(CONFIG_MEM_MT48LC16M8A2TG_75) || \
     defined(CONFIG_MEM_MT48LC8M32B2B5_7)
   /*SDRAM INFORMATION: */
@@ -109,6 +188,13 @@
 #define SDRAM_CL    CL_3
 #endif
 
+#if defined(CONFIG_MEM_MT48H32M16LFCJ_75)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_2
+#endif
+
 
 #ifdef CONFIG_BFIN_KERNEL_CLOCK_MEMINIT_CALC
 /* Equation from section 17 (p17-46) of BF533 HRM */
diff --git a/arch/blackfin/include/asm/mem_map.h b/arch/blackfin/include/asm/mem_map.h
index e92b31051bb..5e21627c9ba 100644
--- a/arch/blackfin/include/asm/mem_map.h
+++ b/arch/blackfin/include/asm/mem_map.h
@@ -1,87 +1,84 @@
 /*
- * mem_map.h
- * Common header file for blackfin family of processors.
+ * Common Blackfin memory map
  *
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
  */
 
-#ifndef _MEM_MAP_H_
-#define _MEM_MAP_H_
+#ifndef __BFIN_MEM_MAP_H__
+#define __BFIN_MEM_MAP_H__
 
 #include <mach/mem_map.h>
 
-#ifndef __ASSEMBLY__
+/* Every Blackfin so far has MMRs like this */
+#ifndef COREMMR_BASE
+# define COREMMR_BASE 0xFFE00000
+#endif
+#ifndef SYSMMR_BASE
+# define SYSMMR_BASE  0xFFC00000
+#endif
 
-#ifdef CONFIG_SMP
-static inline ulong get_l1_scratch_start_cpu(int cpu)
-{
-	return (cpu) ? COREB_L1_SCRATCH_START : COREA_L1_SCRATCH_START;
-}
-static inline ulong get_l1_code_start_cpu(int cpu)
-{
-	return (cpu) ? COREB_L1_CODE_START : COREA_L1_CODE_START;
-}
-static inline ulong get_l1_data_a_start_cpu(int cpu)
-{
-	return (cpu) ? COREB_L1_DATA_A_START : COREA_L1_DATA_A_START;
-}
-static inline ulong get_l1_data_b_start_cpu(int cpu)
-{
-	return (cpu) ? COREB_L1_DATA_B_START : COREA_L1_DATA_B_START;
-}
+/* Every Blackfin so far has on-chip Scratch Pad SRAM like this */
+#ifndef L1_SCRATCH_START
+# define L1_SCRATCH_START  0xFFB00000
+# define L1_SCRATCH_LENGTH 0x1000
+#endif
 
-static inline ulong get_l1_scratch_start(void)
-{
-	return get_l1_scratch_start_cpu(blackfin_core_id());
-}
-static inline ulong get_l1_code_start(void)
-{
-	return get_l1_code_start_cpu(blackfin_core_id());
-}
-static inline ulong get_l1_data_a_start(void)
-{
-	return get_l1_data_a_start_cpu(blackfin_core_id());
-}
-static inline ulong get_l1_data_b_start(void)
-{
-	return get_l1_data_b_start_cpu(blackfin_core_id());
-}
+/* Most parts lack on-chip L2 SRAM */
+#ifndef L2_START
+# define L2_START  0
+# define L2_LENGTH 0
+#endif
+
+/* Most parts lack on-chip L1 ROM */
+#ifndef L1_ROM_START
+# define L1_ROM_START  0
+# define L1_ROM_LENGTH 0
+#endif
+
+/* Allow wonky SMP ports to override this */
+#ifndef GET_PDA_SAFE
+# define GET_PDA_SAFE(preg) \
+	preg.l = _cpu_pda; \
+	preg.h = _cpu_pda;
+# define GET_PDA(preg, dreg) GET_PDA_SAFE(preg)
 
-#else /* !CONFIG_SMP */
+# ifndef __ASSEMBLY__
 
-static inline ulong get_l1_scratch_start_cpu(int cpu)
+static inline unsigned long get_l1_scratch_start_cpu(int cpu)
 {
 	return L1_SCRATCH_START;
 }
-static inline ulong get_l1_code_start_cpu(int cpu)
+static inline unsigned long get_l1_code_start_cpu(int cpu)
 {
 	return L1_CODE_START;
 }
-static inline ulong get_l1_data_a_start_cpu(int cpu)
+static inline unsigned long get_l1_data_a_start_cpu(int cpu)
 {
 	return L1_DATA_A_START;
 }
-static inline ulong get_l1_data_b_start_cpu(int cpu)
+static inline unsigned long get_l1_data_b_start_cpu(int cpu)
 {
 	return L1_DATA_B_START;
 }
-static inline ulong get_l1_scratch_start(void)
+static inline unsigned long get_l1_scratch_start(void)
 {
 	return get_l1_scratch_start_cpu(0);
 }
-static inline ulong get_l1_code_start(void)
+static inline unsigned long get_l1_code_start(void)
 {
 	return  get_l1_code_start_cpu(0);
 }
-static inline ulong get_l1_data_a_start(void)
+static inline unsigned long get_l1_data_a_start(void)
 {
 	return get_l1_data_a_start_cpu(0);
 }
-static inline ulong get_l1_data_b_start(void)
+static inline unsigned long get_l1_data_b_start(void)
 {
 	return get_l1_data_b_start_cpu(0);
 }
 
-#endif /* CONFIG_SMP */
-#endif /* __ASSEMBLY__ */
+# endif /* __ASSEMBLY__ */
+#endif /* !GET_PDA_SAFE */
 
-#endif				/* _MEM_MAP_H_ */
+#endif
diff --git a/arch/blackfin/include/asm/mman.h b/arch/blackfin/include/asm/mman.h
index b58f5ad3f02..8eebf89f5ab 100644
--- a/arch/blackfin/include/asm/mman.h
+++ b/arch/blackfin/include/asm/mman.h
@@ -1,43 +1 @@
-#ifndef __BFIN_MMAN_H__
-#define __BFIN_MMAN_H__
-
-#define PROT_READ	0x1	/* page can be read */
-#define PROT_WRITE	0x2	/* page can be written */
-#define PROT_EXEC	0x4	/* page can be executed */
-#define PROT_SEM	0x8	/* page may be used for atomic ops */
-#define PROT_NONE	0x0	/* page can not be accessed */
-#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
-#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
-
-#define MAP_SHARED	0x01	/* Share changes */
-#define MAP_PRIVATE	0x02	/* Changes are private */
-#define MAP_TYPE	0x0f	/* Mask for type of mapping */
-#define MAP_FIXED	0x10	/* Interpret addr exactly */
-#define MAP_ANONYMOUS	0x20	/* don't use a file */
-
-#define MAP_GROWSDOWN	0x0100	/* stack-like segment */
-#define MAP_DENYWRITE	0x0800	/* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000	/* mark it as an executable */
-#define MAP_LOCKED	0x2000	/* pages are locked */
-#define MAP_NORESERVE	0x4000	/* don't check for reservations */
-#define MAP_POPULATE	0x8000	/* populate (prefault) pagetables */
-#define MAP_NONBLOCK	0x10000	/* do not block on IO */
-
-#define MS_ASYNC	1	/* sync memory asynchronously */
-#define MS_INVALIDATE	2	/* invalidate the caches */
-#define MS_SYNC		4	/* synchronous memory sync */
-
-#define MCL_CURRENT	1	/* lock all current mappings */
-#define MCL_FUTURE	2	/* lock all future mappings */
-
-#define MADV_NORMAL	0x0	/* default page-in behavior */
-#define MADV_RANDOM	0x1	/* page-in minimum required */
-#define MADV_SEQUENTIAL	0x2	/* read-ahead aggressively */
-#define MADV_WILLNEED	0x3	/* pre-fault pages */
-#define MADV_DONTNEED	0x4	/* discard these pages */
-
-/* compatibility flags */
-#define MAP_ANON	MAP_ANONYMOUS
-#define MAP_FILE	0
-
-#endif				/* __BFIN_MMAN_H__ */
+#include <asm-generic/mman.h>
diff --git a/arch/blackfin/include/asm/msgbuf.h b/arch/blackfin/include/asm/msgbuf.h
index 6fcbe8cd801..809134c644a 100644
--- a/arch/blackfin/include/asm/msgbuf.h
+++ b/arch/blackfin/include/asm/msgbuf.h
@@ -1,31 +1 @@
-#ifndef _BFIN_MSGBUF_H
-#define _BFIN_MSGBUF_H
-
-/*
- * The msqid64_ds structure for bfin architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
-	struct ipc64_perm msg_perm;
-	__kernel_time_t msg_stime;	/* last msgsnd time */
-	unsigned long __unused1;
-	__kernel_time_t msg_rtime;	/* last msgrcv time */
-	unsigned long __unused2;
-	__kernel_time_t msg_ctime;	/* last change time */
-	unsigned long __unused3;
-	unsigned long msg_cbytes;	/* current number of bytes on queue */
-	unsigned long msg_qnum;	/* number of messages in queue */
-	unsigned long msg_qbytes;	/* max number of bytes on queue */
-	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
-	__kernel_pid_t msg_lrpid;	/* last receive pid */
-	unsigned long __unused4;
-	unsigned long __unused5;
-};
-
-#endif				/* _BFIN_MSGBUF_H */
+#include <asm-generic/msgbuf.h>
diff --git a/arch/blackfin/include/asm/mutex.h b/arch/blackfin/include/asm/mutex.h
index 5d399256bf0..5cc641c5083 100644
--- a/arch/blackfin/include/asm/mutex.h
+++ b/arch/blackfin/include/asm/mutex.h
@@ -10,7 +10,7 @@
 #define _ASM_MUTEX_H
 
 #ifndef CONFIG_SMP
-#include <asm-generic/mutex-dec.h>
+#include <asm-generic/mutex.h>
 #else
 
 static inline void
diff --git a/arch/blackfin/include/asm/page.h b/arch/blackfin/include/asm/page.h
index 3ea2016a1d4..29dcf75c611 100644
--- a/arch/blackfin/include/asm/page.h
+++ b/arch/blackfin/include/asm/page.h
@@ -1,88 +1,7 @@
 #ifndef _BLACKFIN_PAGE_H
 #define _BLACKFIN_PAGE_H
 
-/* PAGE_SHIFT determines the page size */
+#include <asm-generic/page.h>
+#define MAP_NR(addr) (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)
 
-#define PAGE_SHIFT	12
-#ifdef __ASSEMBLY__
-#define PAGE_SIZE	(1 << PAGE_SHIFT)
-#else
-#define PAGE_SIZE	(1UL << PAGE_SHIFT)
 #endif
-#define PAGE_MASK	(~(PAGE_SIZE-1))
-
-#include <asm/setup.h>
-
-#ifndef __ASSEMBLY__
-
-#define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
-#define free_user_page(page, addr)	free_page(addr)
-
-#define clear_page(page)	memset((page), 0, PAGE_SIZE)
-#define copy_page(to,from)	memcpy((to), (from), PAGE_SIZE)
-
-#define clear_user_page(page, vaddr,pg)	clear_page(page)
-#define copy_user_page(to, from, vaddr,pg)	copy_page(to, from)
-
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct {
-	unsigned long pte;
-} pte_t;
-typedef struct {
-	unsigned long pmd[16];
-} pmd_t;
-typedef struct {
-	unsigned long pgd;
-} pgd_t;
-typedef struct {
-	unsigned long pgprot;
-} pgprot_t;
-typedef struct page *pgtable_t;
-
-#define pte_val(x)	((x).pte)
-#define pmd_val(x)	((&x)->pmd[0])
-#define pgd_val(x)	((x).pgd)
-#define pgprot_val(x)	((x).pgprot)
-
-#define __pte(x)	((pte_t) { (x) } )
-#define __pmd(x)	((pmd_t) { (x) } )
-#define __pgd(x)	((pgd_t) { (x) } )
-#define __pgprot(x)	((pgprot_t) { (x) } )
-
-extern unsigned long memory_start;
-extern unsigned long memory_end;
-
-#endif				/* !__ASSEMBLY__ */
-
-#include <asm/page_offset.h>
-#include <asm/io.h>
-
-#define PAGE_OFFSET		(PAGE_OFFSET_RAW)
-
-#ifndef __ASSEMBLY__
-
-#define __pa(vaddr)		virt_to_phys((void *)(vaddr))
-#define __va(paddr)		phys_to_virt((unsigned long)(paddr))
-
-#define MAP_NR(addr)		(((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)
-
-#define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
-#define pfn_to_virt(pfn)	__va((pfn) << PAGE_SHIFT)
-#define virt_to_page(addr)	(mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
-#define page_to_virt(page)	((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
-#define VALID_PAGE(page)	((page - mem_map) < max_mapnr)
-
-#define pfn_to_page(pfn)	virt_to_page(pfn_to_virt(pfn))
-#define page_to_pfn(page)	virt_to_pfn(page_to_virt(page))
-#define pfn_valid(pfn)	        ((pfn) < max_mapnr)
-
-#define	virt_addr_valid(kaddr)	(((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
-				((void *)(kaddr) < (void *)memory_end))
-
-#include <asm-generic/getorder.h>
-
-#endif				/* __ASSEMBLY__ */
-
-#endif				/* _BLACKFIN_PAGE_H */
diff --git a/arch/blackfin/include/asm/param.h b/arch/blackfin/include/asm/param.h
index 41564a6347f..965d4542797 100644
--- a/arch/blackfin/include/asm/param.h
+++ b/arch/blackfin/include/asm/param.h
@@ -1,22 +1 @@
-#ifndef _BLACKFIN_PARAM_H
-#define _BLACKFIN_PARAM_H
-
-#ifdef __KERNEL__
-#define HZ 		CONFIG_HZ
-#define	USER_HZ		100
-#define	CLOCKS_PER_SEC	(USER_HZ)
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE	4096
-
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
-
-#endif				/* _BLACKFIN_PARAM_H */
+#include <asm-generic/param.h>
diff --git a/arch/blackfin/include/asm/percpu.h b/arch/blackfin/include/asm/percpu.h
index c94c7bc88c7..06a959d6723 100644
--- a/arch/blackfin/include/asm/percpu.h
+++ b/arch/blackfin/include/asm/percpu.h
@@ -1,6 +1 @@
-#ifndef __ARCH_BLACKFIN_PERCPU__
-#define __ARCH_BLACKFIN_PERCPU__
-
 #include <asm-generic/percpu.h>
-
-#endif	/* __ARCH_BLACKFIN_PERCPU__ */
diff --git a/arch/blackfin/include/asm/pgalloc.h b/arch/blackfin/include/asm/pgalloc.h
index c686e0542fd..f261cb7dda0 100644
--- a/arch/blackfin/include/asm/pgalloc.h
+++ b/arch/blackfin/include/asm/pgalloc.h
@@ -1,8 +1 @@
-#ifndef _BLACKFIN_PGALLOC_H
-#define _BLACKFIN_PGALLOC_H
-
-#include <asm/setup.h>
-
-#define check_pgt_cache()	do { } while (0)
-
-#endif				/* _BLACKFIN_PGALLOC_H */
+#include <asm-generic/pgalloc.h>
diff --git a/arch/blackfin/include/asm/poll.h b/arch/blackfin/include/asm/poll.h
index 94cc2636e0e..a0556671357 100644
--- a/arch/blackfin/include/asm/poll.h
+++ b/arch/blackfin/include/asm/poll.h
@@ -1,24 +1,9 @@
 #ifndef __BFIN_POLL_H
 #define __BFIN_POLL_H
 
-#define POLLIN		  1
-#define POLLPRI		  2
-#define POLLOUT		  4
-#define POLLERR		  8
-#define POLLHUP		 16
-#define POLLNVAL	 32
-#define POLLRDNORM	 64
-#define POLLWRNORM	POLLOUT
-#define POLLRDBAND	128
+#define POLLWRNORM	4 /* POLLOUT */
 #define POLLWRBAND	256
-#define POLLMSG		0x0400
-#define POLLREMOVE	0x1000
-#define POLLRDHUP       0x2000
 
-struct pollfd {
-	int fd;
-	short events;
-	short revents;
-};
+#include <asm-generic/poll.h>
 
-#endif				/* __BFIN_POLL_H */
+#endif
diff --git a/arch/blackfin/include/asm/posix_types.h b/arch/blackfin/include/asm/posix_types.h
index 23aa1f8c1bd..80c9d64eb26 100644
--- a/arch/blackfin/include/asm/posix_types.h
+++ b/arch/blackfin/include/asm/posix_types.h
@@ -1,61 +1,27 @@
 #ifndef __ARCH_BFIN_POSIX_TYPES_H
 #define __ARCH_BFIN_POSIX_TYPES_H
 
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc.  Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned long __kernel_ino_t;
 typedef unsigned short __kernel_mode_t;
+#define __kernel_mode_t __kernel_mode_t
+
 typedef unsigned short __kernel_nlink_t;
-typedef long __kernel_off_t;
-typedef int __kernel_pid_t;
+#define __kernel_nlink_t __kernel_nlink_t
+
 typedef unsigned int __kernel_ipc_pid_t;
-typedef unsigned int __kernel_uid_t;
-typedef unsigned int __kernel_gid_t;
+#define __kernel_ipc_pid_t __kernel_ipc_pid_t
+
 typedef unsigned long __kernel_size_t;
 typedef long __kernel_ssize_t;
 typedef int __kernel_ptrdiff_t;
-typedef long __kernel_time_t;
-typedef long __kernel_suseconds_t;
-typedef long __kernel_clock_t;
-typedef int __kernel_timer_t;
-typedef int __kernel_clockid_t;
-typedef int __kernel_daddr_t;
-typedef char *__kernel_caddr_t;
-typedef unsigned short __kernel_uid16_t;
-typedef unsigned short __kernel_gid16_t;
-typedef unsigned int __kernel_uid32_t;
-typedef unsigned int __kernel_gid32_t;
+#define __kernel_size_t __kernel_size_t
 
 typedef unsigned short __kernel_old_uid_t;
 typedef unsigned short __kernel_old_gid_t;
-typedef unsigned short __kernel_old_dev_t;
-
-#ifdef __GNUC__
-typedef long long __kernel_loff_t;
-#endif
+#define __kernel_old_uid_t __kernel_old_uid_t
 
-typedef struct {
-	int val[2];
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__)
-
-#undef	__FD_SET
-#define	__FD_SET(d, set)	((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
-
-#undef	__FD_CLR
-#define	__FD_CLR(d, set)	((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
-
-#undef	__FD_ISSET
-#define	__FD_ISSET(d, set)	((set)->fds_bits[__FDELT(d)] & __FDMASK(d))
-
-#undef	__FD_ZERO
-#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
+typedef unsigned short __kernel_old_dev_t;
+#define __kernel_old_dev_t __kernel_old_dev_t
 
-#endif				/* defined(__KERNEL__) */
+#include <asm-generic/posix_types.h>
 
 #endif
diff --git a/arch/blackfin/include/asm/processor.h b/arch/blackfin/include/asm/processor.h
index 3040415523b..d0be99be830 100644
--- a/arch/blackfin/include/asm/processor.h
+++ b/arch/blackfin/include/asm/processor.h
@@ -7,9 +7,8 @@
  */
 #define current_text_addr() ({ __label__ _l; _l: &&_l;})
 
+#include <asm/ptrace.h>
 #include <asm/blackfin.h>
-#include <asm/segment.h>
-#include <linux/compiler.h>
 
 static inline unsigned long rdusp(void)
 {
@@ -59,36 +58,8 @@ struct thread_struct {
 	PS_S, 0, 0						\
 }
 
-/*
- * Do necessary setup to start up a newly executed thread.
- *
- * pass the data segment into user programs if it exists,
- * it can't hurt anything as far as I can tell
- */
-#ifndef CONFIG_SMP
-#define start_thread(_regs, _pc, _usp)					\
-do {									\
-	set_fs(USER_DS);						\
-	(_regs)->pc = (_pc);						\
-	if (current->mm)						\
-		(_regs)->p5 = current->mm->start_data;			\
-	task_thread_info(current)->l1_task_info.stack_start		\
-		= (void *)current->mm->context.stack_start;		\
-	task_thread_info(current)->l1_task_info.lowest_sp = (void *)(_usp); \
-	memcpy(L1_SCRATCH_TASK_INFO, &task_thread_info(current)->l1_task_info, \
-		sizeof(*L1_SCRATCH_TASK_INFO));				\
-	wrusp(_usp);							\
-} while(0)
-#else
-#define start_thread(_regs, _pc, _usp)					\
-do {									\
-	set_fs(USER_DS);						\
-	(_regs)->pc = (_pc);						\
-	if (current->mm)						\
-		(_regs)->p5 = current->mm->start_data;			\
-	wrusp(_usp);							\
-} while (0)
-#endif
+extern void start_thread(struct pt_regs *regs, unsigned long new_ip,
+					       unsigned long new_sp);
 
 /* Forward declaration, a strange C thing */
 struct task_struct;
diff --git a/arch/blackfin/include/asm/resource.h b/arch/blackfin/include/asm/resource.h
index 091355ab349..04bc4db8921 100644
--- a/arch/blackfin/include/asm/resource.h
+++ b/arch/blackfin/include/asm/resource.h
@@ -1,6 +1 @@
-#ifndef _BFIN_RESOURCE_H
-#define _BFIN_RESOURCE_H
-
 #include <asm-generic/resource.h>
-
-#endif				/* _BFIN_RESOURCE_H */
diff --git a/arch/blackfin/include/asm/sembuf.h b/arch/blackfin/include/asm/sembuf.h
index 18deb5c7fa5..7673b83cfef 100644
--- a/arch/blackfin/include/asm/sembuf.h
+++ b/arch/blackfin/include/asm/sembuf.h
@@ -1,25 +1 @@
-#ifndef _BFIN_SEMBUF_H
-#define _BFIN_SEMBUF_H
-
-/*
- * The semid64_ds structure for bfin architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
-	struct ipc64_perm sem_perm;	/* permissions .. see ipc.h */
-	__kernel_time_t sem_otime;	/* last semop time */
-	unsigned long __unused1;
-	__kernel_time_t sem_ctime;	/* last change time */
-	unsigned long __unused2;
-	unsigned long sem_nsems;	/* no. of semaphores in array */
-	unsigned long __unused3;
-	unsigned long __unused4;
-};
-
-#endif				/* _BFIN_SEMBUF_H */
+#include <asm-generic/sembuf.h>
diff --git a/arch/blackfin/include/asm/serial.h b/arch/blackfin/include/asm/serial.h
index 3a47606c858..94a4a12e3bf 100644
--- a/arch/blackfin/include/asm/serial.h
+++ b/arch/blackfin/include/asm/serial.h
@@ -1,6 +1,2 @@
-/*
- * include/asm-blackfin/serial.h
- */
-
+#include <asm-generic/serial.h>
 #define SERIAL_EXTRA_IRQ_FLAGS IRQF_TRIGGER_HIGH
-#define BASE_BAUD (1843200 / 16)
diff --git a/arch/blackfin/include/asm/setup.h b/arch/blackfin/include/asm/setup.h
index 01c8c6cbe6f..552df83f1a4 100644
--- a/arch/blackfin/include/asm/setup.h
+++ b/arch/blackfin/include/asm/setup.h
@@ -1,17 +1 @@
-/*
-** asm/setup.h -- Definition of the Linux/bfin setup information
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License.  See the file COPYING in the main directory of this archive
-** for more details.
-**
-** Copyright Lineo, Inc 2001          Tony Kou
-**
-*/
-
-#ifndef _BFIN_SETUP_H
-#define _BFIN_SETUP_H
-
-#define COMMAND_LINE_SIZE	512
-
-#endif				/* _BFIN_SETUP_H */
+#include <asm-generic/setup.h>
diff --git a/arch/blackfin/include/asm/shmbuf.h b/arch/blackfin/include/asm/shmbuf.h
index 612436303e8..83c05fc2de3 100644
--- a/arch/blackfin/include/asm/shmbuf.h
+++ b/arch/blackfin/include/asm/shmbuf.h
@@ -1,42 +1 @@
-#ifndef _BFIN_SHMBUF_H
-#define _BFIN_SHMBUF_H
-
-/*
- * The shmid64_ds structure for bfin architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
-	struct ipc64_perm shm_perm;	/* operation perms */
-	size_t shm_segsz;	/* size of segment (bytes) */
-	__kernel_time_t shm_atime;	/* last attach time */
-	unsigned long __unused1;
-	__kernel_time_t shm_dtime;	/* last detach time */
-	unsigned long __unused2;
-	__kernel_time_t shm_ctime;	/* last change time */
-	unsigned long __unused3;
-	__kernel_pid_t shm_cpid;	/* pid of creator */
-	__kernel_pid_t shm_lpid;	/* pid of last operator */
-	unsigned long shm_nattch;	/* no. of current attaches */
-	unsigned long __unused4;
-	unsigned long __unused5;
-};
-
-struct shminfo64 {
-	unsigned long shmmax;
-	unsigned long shmmin;
-	unsigned long shmmni;
-	unsigned long shmseg;
-	unsigned long shmall;
-	unsigned long __unused1;
-	unsigned long __unused2;
-	unsigned long __unused3;
-	unsigned long __unused4;
-};
-
-#endif				/* _BFIN_SHMBUF_H */
+#include <asm-generic/shmbuf.h>
diff --git a/arch/blackfin/include/asm/shmparam.h b/arch/blackfin/include/asm/shmparam.h
index 3c03906b766..93f30deb95d 100644
--- a/arch/blackfin/include/asm/shmparam.h
+++ b/arch/blackfin/include/asm/shmparam.h
@@ -1,6 +1 @@
-#ifndef _BFIN_SHMPARAM_H
-#define _BFIN_SHMPARAM_H
-
-#define	SHMLBA PAGE_SIZE	/* attach addr a multiple of this */
-
-#endif				/* _BFIN_SHMPARAM_H */
+#include <asm-generic/shmparam.h>
diff --git a/arch/blackfin/include/asm/signal.h b/arch/blackfin/include/asm/signal.h
index 2eea9079445..77a3bf37b69 100644
--- a/arch/blackfin/include/asm/signal.h
+++ b/arch/blackfin/include/asm/signal.h
@@ -1,160 +1,7 @@
 #ifndef _BLACKFIN_SIGNAL_H
 #define _BLACKFIN_SIGNAL_H
 
-#include <linux/types.h>
+#define SA_RESTORER 0x04000000
+#include <asm-generic/signal.h>
 
-/* Avoid too many header ordering problems.  */
-struct siginfo;
-
-#ifdef __KERNEL__
-/* Most things should be clean enough to redefine this at will, if care
-   is taken to make libc match.  */
-
-#define _NSIG		64
-#define _NSIG_BPW	32
-#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t;	/* at least 32 bits */
-
-typedef struct {
-	unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-#define NSIG		32
-typedef unsigned long sigset_t;
-
-#endif				/* __KERNEL__ */
-
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-#define SIGBUS		 7
-#define SIGFPE		 8
-#define SIGKILL		 9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-#define	SIGUNUSED	31
-
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN	32
-#define SIGRTMAX	_NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001
-#define SA_NOCLDWAIT	0x00000002	/* not supported yet */
-#define SA_SIGINFO	0x00000004
-#define SA_ONSTACK	0x08000000
-#define SA_RESTART	0x10000000
-#define SA_NODEFER	0x40000000
-#define SA_RESETHAND	0x80000000
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	2048
-#define SIGSTKSZ	8192
-
-#include <asm-generic/signal-defs.h>
-
-#ifdef __KERNEL__
-struct old_sigaction {
-	__sighandler_t sa_handler;
-	old_sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer) (void);
-};
-
-struct sigaction {
-	__sighandler_t sa_handler;
-	unsigned long sa_flags;
-	void (*sa_restorer) (void);
-	sigset_t sa_mask;	/* mask last for extensibility */
-};
-
-struct k_sigaction {
-	struct sigaction sa;
-};
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-struct sigaction {
-	union {
-		__sighandler_t _sa_handler;
-		void (*_sa_sigaction) (int, struct siginfo *, void *);
-	} _u;
-	sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer) (void);
-};
-
-#define sa_handler	_u._sa_handler
-#define sa_sigaction	_u._sa_sigaction
-
-#endif				/* __KERNEL__ */
-
-typedef struct sigaltstack {
-	void __user *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-
-#include <asm/sigcontext.h>
-#undef __HAVE_ARCH_SIG_BITOPS
-
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#endif				/* __KERNEL__ */
-
-#endif				/* _BLACKFIN_SIGNAL_H */
+#endif
diff --git a/arch/blackfin/include/asm/socket.h b/arch/blackfin/include/asm/socket.h
index fac7fe9e1f8..6b71384b9d8 100644
--- a/arch/blackfin/include/asm/socket.h
+++ b/arch/blackfin/include/asm/socket.h
@@ -1,59 +1 @@
-#ifndef _ASM_SOCKET_H
-#define _ASM_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockoptions(2) */
-#define SOL_SOCKET	1
-
-#define SO_DEBUG	1
-#define SO_REUSEADDR	2
-#define SO_TYPE		3
-#define SO_ERROR	4
-#define SO_DONTROUTE	5
-#define SO_BROADCAST	6
-#define SO_SNDBUF	7
-#define SO_RCVBUF	8
-#define SO_SNDBUFFORCE	32
-#define SO_RCVBUFFORCE	33
-#define SO_KEEPALIVE	9
-#define SO_OOBINLINE	10
-#define SO_NO_CHECK	11
-#define SO_PRIORITY	12
-#define SO_LINGER	13
-#define SO_BSDCOMPAT	14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED	16
-#define SO_PEERCRED	17
-#define SO_RCVLOWAT	18
-#define SO_SNDLOWAT	19
-#define SO_RCVTIMEO	20
-#define SO_SNDTIMEO	21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION		22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
-#define SO_SECURITY_ENCRYPTION_NETWORK		24
-
-#define SO_BINDTODEVICE	25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER	26
-#define SO_DETACH_FILTER	27
-
-#define SO_PEERNAME		28
-#define SO_TIMESTAMP		29
-#define SCM_TIMESTAMP		SO_TIMESTAMP
-
-#define SO_ACCEPTCONN		30
-#define SO_PEERSEC		31
-#define SO_PASSSEC		34
-#define SO_TIMESTAMPNS		35
-#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
-
-#define SO_MARK			36
-
-#define SO_TIMESTAMPING		37
-#define SCM_TIMESTAMPING	SO_TIMESTAMPING
-
-#endif				/* _ASM_SOCKET_H */
+#include <asm-generic/socket.h>
diff --git a/arch/blackfin/include/asm/sockios.h b/arch/blackfin/include/asm/sockios.h
index 426b89bfaa8..def6d4746ee 100644
--- a/arch/blackfin/include/asm/sockios.h
+++ b/arch/blackfin/include/asm/sockios.h
@@ -1,13 +1 @@
-#ifndef __ARCH_BFIN_SOCKIOS__
-#define __ARCH_BFIN_SOCKIOS__
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 	0x8901
-#define SIOCSPGRP	0x8902
-#define FIOGETOWN	0x8903
-#define SIOCGPGRP	0x8904
-#define SIOCATMARK	0x8905
-#define SIOCGSTAMP	0x8906	/* Get stamp (timeval) */
-#define SIOCGSTAMPNS	0x8907	/* Get stamp (timespec) */
-
-#endif				/* __ARCH_BFIN_SOCKIOS__ */
+#include <asm-generic/sockios.h>
diff --git a/arch/blackfin/include/asm/spinlock.h b/arch/blackfin/include/asm/spinlock.h
index 0249ac31947..d6ff4b59fcb 100644
--- a/arch/blackfin/include/asm/spinlock.h
+++ b/arch/blackfin/include/asm/spinlock.h
@@ -1,6 +1,10 @@
 #ifndef __BFIN_SPINLOCK_H
 #define __BFIN_SPINLOCK_H
 
+#ifndef CONFIG_SMP
+# include <asm-generic/spinlock.h>
+#else
+
 #include <asm/atomic.h>
 
 asmlinkage int __raw_spin_is_locked_asm(volatile int *ptr);
@@ -86,4 +90,6 @@ static inline void __raw_write_unlock(raw_rwlock_t *rw)
 #define _raw_read_relax(lock)	cpu_relax()
 #define _raw_write_relax(lock)	cpu_relax()
 
+#endif
+
 #endif /*  !__BFIN_SPINLOCK_H */
diff --git a/arch/blackfin/include/asm/statfs.h b/arch/blackfin/include/asm/statfs.h
index 350672091ba..0b91fe198c2 100644
--- a/arch/blackfin/include/asm/statfs.h
+++ b/arch/blackfin/include/asm/statfs.h
@@ -1,6 +1 @@
-#ifndef _BFIN_STATFS_H
-#define _BFIN_STATFS_H
-
 #include <asm-generic/statfs.h>
-
-#endif				/* _BFIN_STATFS_H */
diff --git a/arch/blackfin/include/asm/swab.h b/arch/blackfin/include/asm/swab.h
index 6403ad2932e..d442113de51 100644
--- a/arch/blackfin/include/asm/swab.h
+++ b/arch/blackfin/include/asm/swab.h
@@ -2,11 +2,7 @@
 #define _BLACKFIN_SWAB_H
 
 #include <linux/types.h>
-#include <linux/compiler.h>
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#  define __SWAB_64_THRU_32__
-#endif
+#include <asm-generic/swab.h>
 
 #ifdef __GNUC__
 
diff --git a/arch/blackfin/include/asm/system.h b/arch/blackfin/include/asm/system.h
index 294dbda2416..85e8f16cf8c 100644
--- a/arch/blackfin/include/asm/system.h
+++ b/arch/blackfin/include/asm/system.h
@@ -135,11 +135,13 @@ struct __xchg_dummy {
 };
 #define __xg(x) ((volatile struct __xchg_dummy *)(x))
 
+#include <mach/blackfin.h>
+
 static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
 				   int size)
 {
 	unsigned long tmp = 0;
-	unsigned long flags = 0;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 
diff --git a/arch/blackfin/include/asm/termbits.h b/arch/blackfin/include/asm/termbits.h
index f37feb7cf89..3935b106de7 100644
--- a/arch/blackfin/include/asm/termbits.h
+++ b/arch/blackfin/include/asm/termbits.h
@@ -1,198 +1 @@
-#ifndef __ARCH_BFIN_TERMBITS_H__
-#define __ARCH_BFIN_TERMBITS_H__
-
-#include <linux/posix_types.h>
-
-typedef unsigned char cc_t;
-typedef unsigned int speed_t;
-typedef unsigned int tcflag_t;
-
-#define NCCS 19
-struct termios {
-	tcflag_t c_iflag;	/* input mode flags */
-	tcflag_t c_oflag;	/* output mode flags */
-	tcflag_t c_cflag;	/* control mode flags */
-	tcflag_t c_lflag;	/* local mode flags */
-	cc_t c_line;		/* line discipline */
-	cc_t c_cc[NCCS];	/* control characters */
-};
-
-struct termios2 {
-	tcflag_t c_iflag;               /* input mode flags */
-	tcflag_t c_oflag;               /* output mode flags */
-	tcflag_t c_cflag;               /* control mode flags */
-	tcflag_t c_lflag;               /* local mode flags */
-	cc_t c_line;                    /* line discipline */
-	cc_t c_cc[NCCS];                /* control characters */
-	speed_t c_ispeed;               /* input speed */
-	speed_t c_ospeed;               /* output speed */
-};
-
-struct ktermios {
-	tcflag_t c_iflag;               /* input mode flags */
-	tcflag_t c_oflag;               /* output mode flags */
-	tcflag_t c_cflag;               /* control mode flags */
-	tcflag_t c_lflag;               /* local mode flags */
-	cc_t c_line;                    /* line discipline */
-	cc_t c_cc[NCCS];                /* control characters */
-	speed_t c_ispeed;               /* input speed */
-	speed_t c_ospeed;               /* output speed */
-};
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-/* c_iflag bits */
-#define IGNBRK	0000001
-#define BRKINT	0000002
-#define IGNPAR	0000004
-#define PARMRK	0000010
-#define INPCK	0000020
-#define ISTRIP	0000040
-#define INLCR	0000100
-#define IGNCR	0000200
-#define ICRNL	0000400
-#define IUCLC	0001000
-#define IXON	0002000
-#define IXANY	0004000
-#define IXOFF	0010000
-#define IMAXBEL	0020000
-#define IUTF8	0040000
-
-/* c_oflag bits */
-#define OPOST	0000001
-#define OLCUC	0000002
-#define ONLCR	0000004
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-#define OFILL	0000100
-#define OFDEL	0000200
-#define NLDLY	0000400
-#define   NL0	0000000
-#define   NL1	0000400
-#define CRDLY	0003000
-#define   CR0	0000000
-#define   CR1	0001000
-#define   CR2	0002000
-#define   CR3	0003000
-#define TABDLY	0014000
-#define   TAB0	0000000
-#define   TAB1	0004000
-#define   TAB2	0010000
-#define   TAB3	0014000
-#define   XTABS	0014000
-#define BSDLY	0020000
-#define   BS0	0000000
-#define   BS1	0020000
-#define VTDLY	0040000
-#define   VT0	0000000
-#define   VT1	0040000
-#define FFDLY	0100000
-#define   FF0	0000000
-#define   FF1	0100000
-
-/* c_cflag bit meaning */
-#define CBAUD	0010017
-#define  B0	0000000		/* hang up */
-#define  B50	0000001
-#define  B75	0000002
-#define  B110	0000003
-#define  B134	0000004
-#define  B150	0000005
-#define  B200	0000006
-#define  B300	0000007
-#define  B600	0000010
-#define  B1200	0000011
-#define  B1800	0000012
-#define  B2400	0000013
-#define  B4800	0000014
-#define  B9600	0000015
-#define  B19200	0000016
-#define  B38400	0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE	0000060
-#define   CS5	0000000
-#define   CS6	0000020
-#define   CS7	0000040
-#define   CS8	0000060
-#define CSTOPB	0000100
-#define CREAD	0000200
-#define PARENB	0000400
-#define PARODD	0001000
-#define HUPCL	0002000
-#define CLOCAL	0004000
-#define CBAUDEX 0010000
-#define BOTHER	0010000
-#define    B57600 0010001
-#define   B115200 0010002
-#define   B230400 0010003
-#define   B460800 0010004
-#define   B500000 0010005
-#define   B576000 0010006
-#define   B921600 0010007
-#define  B1000000 0010010
-#define  B1152000 0010011
-#define  B1500000 0010012
-#define  B2000000 0010013
-#define  B2500000 0010014
-#define  B3000000 0010015
-#define  B3500000 0010016
-#define  B4000000 0010017
-#define CIBAUD	  002003600000	/* input baud rate */
-#define CMSPAR	  010000000000	/* mark or space (stick) parity */
-#define CRTSCTS	  020000000000	/* flow control */
-
-#define IBSHIFT	16	/* Shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-#define ISIG	0000001
-#define ICANON	0000002
-#define XCASE	0000004
-#define ECHO	0000010
-#define ECHOE	0000020
-#define ECHOK	0000040
-#define ECHONL	0000100
-#define NOFLSH	0000200
-#define TOSTOP	0000400
-#define ECHOCTL	0001000
-#define ECHOPRT	0002000
-#define ECHOKE	0004000
-#define FLUSHO	0010000
-#define PENDIN	0040000
-#define IEXTEN	0100000
-
-/* tcflow() and TCXONC use these */
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* tcflush() and TCFLSH use these */
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
-/* tcsetattr uses these */
-#define	TCSANOW		0
-#define	TCSADRAIN	1
-#define	TCSAFLUSH	2
-
-#endif				/* __ARCH_BFIN_TERMBITS_H__ */
+#include <asm-generic/termbits.h>
diff --git a/arch/blackfin/include/asm/termios.h b/arch/blackfin/include/asm/termios.h
index d50d063c605..280d78a9d96 100644
--- a/arch/blackfin/include/asm/termios.h
+++ b/arch/blackfin/include/asm/termios.h
@@ -1,94 +1 @@
-#ifndef __BFIN_TERMIOS_H__
-#define __BFIN_TERMIOS_H__
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
-	unsigned short c_iflag;	/* input mode flags */
-	unsigned short c_oflag;	/* output mode flags */
-	unsigned short c_cflag;	/* control mode flags */
-	unsigned short c_lflag;	/* local mode flags */
-	unsigned char c_line;	/* line discipline */
-	unsigned char c_cc[NCC];	/* control characters */
-};
-
-/* modem lines */
-#define TIOCM_LE	0x001
-#define TIOCM_DTR	0x002
-#define TIOCM_RTS	0x004
-#define TIOCM_ST	0x008
-#define TIOCM_SR	0x010
-#define TIOCM_CTS	0x020
-#define TIOCM_CAR	0x040
-#define TIOCM_RNG	0x080
-#define TIOCM_DSR	0x100
-#define TIOCM_CD	TIOCM_CAR
-#define TIOCM_RI	TIOCM_RNG
-#define TIOCM_OUT1	0x2000
-#define TIOCM_OUT2	0x4000
-#define TIOCM_LOOP	0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-#ifdef __KERNEL__
-
-/*	intr=^C		quit=^\		erase=del	kill=^U
-	eof=^D		vtime=\0	vmin=\1		sxtc=\0
-	start=^Q	stop=^S		susp=^Z		eol=\0
-	reprint=^R	discard=^U	werase=^W	lnext=^V
-	eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
-	unsigned short __tmp; \
-	get_user(__tmp,&(termio)->x); \
-	*(unsigned short *) &(termios)->x = __tmp; \
-}
-
-#define user_termio_to_kernel_termios(termios, termio) \
-({ \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
-	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-#define kernel_termios_to_user_termio(termio, termios) \
-({ \
-	put_user((termios)->c_iflag, &(termio)->c_iflag); \
-	put_user((termios)->c_oflag, &(termio)->c_oflag); \
-	put_user((termios)->c_cflag, &(termio)->c_cflag); \
-	put_user((termios)->c_lflag, &(termio)->c_lflag); \
-	put_user((termios)->c_line,  &(termio)->c_line); \
-	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
-})
-
-#define user_termios_to_kernel_termios(k, u) \
-	copy_from_user(k, u, sizeof(struct termios2))
-#define kernel_termios_to_user_termios(u, k) \
-	copy_to_user(u, k, sizeof(struct termios2))
-#define user_termios_to_kernel_termios_1(k, u) \
-	copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios_1(u, k) \
-	copy_to_user(u, k, sizeof(struct termios))
-
-#endif				/* __KERNEL__ */
-
-#endif				/* __BFIN_TERMIOS_H__ */
+#include <asm-generic/termios.h>
diff --git a/arch/blackfin/include/asm/tlbflush.h b/arch/blackfin/include/asm/tlbflush.h
index 277b400924b..f1a06c006ed 100644
--- a/arch/blackfin/include/asm/tlbflush.h
+++ b/arch/blackfin/include/asm/tlbflush.h
@@ -1,56 +1 @@
-#ifndef _BLACKFIN_TLBFLUSH_H
-#define _BLACKFIN_TLBFLUSH_H
-
-/*
- * Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org>
- * Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com>
- */
-
-#include <asm/setup.h>
-
-/*
- * flush all user-space atc entries.
- */
-static inline void __flush_tlb(void)
-{
-	BUG();
-}
-
-static inline void __flush_tlb_one(unsigned long addr)
-{
-	BUG();
-}
-
-#define flush_tlb() __flush_tlb()
-
-/*
- * flush all atc entries (both kernel and user-space entries).
- */
-static inline void flush_tlb_all(void)
-{
-	BUG();
-}
-
-static inline void flush_tlb_mm(struct mm_struct *mm)
-{
-	BUG();
-}
-
-static inline void flush_tlb_page(struct vm_area_struct *vma,
-				  unsigned long addr)
-{
-	BUG();
-}
-
-static inline void flush_tlb_range(struct mm_struct *mm,
-				   unsigned long start, unsigned long end)
-{
-	BUG();
-}
-
-static inline void flush_tlb_kernel_page(unsigned long addr)
-{
-	BUG();
-}
-
-#endif
+#include <asm-generic/tlbflush.h>
diff --git a/arch/blackfin/include/asm/topology.h b/arch/blackfin/include/asm/topology.h
index acee2398789..5428f333a02 100644
--- a/arch/blackfin/include/asm/topology.h
+++ b/arch/blackfin/include/asm/topology.h
@@ -1,6 +1 @@
-#ifndef _ASM_BLACKFIN_TOPOLOGY_H
-#define _ASM_BLACKFIN_TOPOLOGY_H
-
 #include <asm-generic/topology.h>
-
-#endif				/* _ASM_BLACKFIN_TOPOLOGY_H */
diff --git a/arch/blackfin/include/asm/traps.h b/arch/blackfin/include/asm/traps.h
index 34f7295fb07..3cdc454cde2 100644
--- a/arch/blackfin/include/asm/traps.h
+++ b/arch/blackfin/include/asm/traps.h
@@ -111,9 +111,7 @@
 	level "   bits in the Watchpoint Instruction Address Control register (WPIACTL) is set.\n"
 #define EXC_0x2A(level) \
 	"Instruction fetch misaligned address violation\n" \
-	level " - Attempted misaligned instruction cache fetch. On a misaligned instruction fetch\n" \
-	level "   exception, the return address provided in RETX is the destination address which is\n" \
-	level "   misaligned, rather than the address of the offending instruction.\n"
+	level " - Attempted misaligned instruction cache fetch.\n"
 #define EXC_0x2B(level) \
 	"CPLB protection violation\n" \
 	level " - Illegal instruction fetch access (memory protection violation).\n"
diff --git a/arch/blackfin/include/asm/types.h b/arch/blackfin/include/asm/types.h
index 8441cbc2bf9..b9e79bc580d 100644
--- a/arch/blackfin/include/asm/types.h
+++ b/arch/blackfin/include/asm/types.h
@@ -1,36 +1 @@
-#ifndef _BFIN_TYPES_H
-#define _BFIN_TYPES_H
-
-/*
- * This file is never included by application software unless
- * explicitly requested (e.g., via linux/types.h) in which case the
- * application is Linux specific so (user-) name space pollution is
- * not a major issue.  However, for interoperability, libraries still
- * need to be careful to avoid a name clashes.
- */
-#include <asm-generic/int-ll64.h>
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif				/* __ASSEMBLY__ */
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-
-#define BITS_PER_LONG 32
-
-#ifndef __ASSEMBLY__
-
-/* Dma addresses are 32-bits wide.  */
-
-typedef u32 dma_addr_t;
-typedef u64 dma64_addr_t;
-
-#endif				/* __ASSEMBLY__ */
-
-#endif				/* __KERNEL__ */
-
-#endif				/* _BFIN_TYPES_H */
+#include <asm-generic/types.h>
diff --git a/arch/blackfin/include/asm/uaccess.h b/arch/blackfin/include/asm/uaccess.h
index 8894e9ffbb5..2f469a1f80f 100644
--- a/arch/blackfin/include/asm/uaccess.h
+++ b/arch/blackfin/include/asm/uaccess.h
@@ -265,4 +265,26 @@ __clear_user(void *to, unsigned long n)
 
 #define clear_user(to, n) __clear_user(to, n)
 
+/* How to interpret these return values:
+ *	CORE:      can be accessed by core load or dma memcpy
+ *	CORE_ONLY: can only be accessed by core load
+ *	DMA:       can only be accessed by dma memcpy
+ *	IDMA:      can only be accessed by interprocessor dma memcpy (BF561)
+ *	ITEST:     can be accessed by isram memcpy or dma memcpy
+ */
+enum {
+	BFIN_MEM_ACCESS_CORE = 0,
+	BFIN_MEM_ACCESS_CORE_ONLY,
+	BFIN_MEM_ACCESS_DMA,
+	BFIN_MEM_ACCESS_IDMA,
+	BFIN_MEM_ACCESS_ITEST,
+};
+/**
+ *	bfin_mem_access_type() - what kind of memory access is required
+ *	@addr:   the address to check
+ *	@size:   number of bytes needed
+ *	@return: <0 is error, >=0 is BFIN_MEM_ACCESS_xxx enum (see above)
+ */
+int bfin_mem_access_type(unsigned long addr, unsigned long size);
+
 #endif				/* _BLACKFIN_UACCESS_H */
diff --git a/arch/blackfin/include/asm/ucontext.h b/arch/blackfin/include/asm/ucontext.h
index 4a4e3856beb..9bc07b9f30f 100644
--- a/arch/blackfin/include/asm/ucontext.h
+++ b/arch/blackfin/include/asm/ucontext.h
@@ -1,17 +1 @@
-/** Changes made by Tony Kou   Lineo Inc.    May 2001
- *
- *  Based on: include/m68knommu/ucontext.h
- */
-
-#ifndef _BLACKFIN_UCONTEXT_H
-#define _BLACKFIN_UCONTEXT_H
-
-struct ucontext {
-	unsigned long uc_flags;	/* the others are necessary */
-	struct ucontext *uc_link;
-	stack_t uc_stack;
-	struct sigcontext uc_mcontext;
-	sigset_t uc_sigmask;	/* mask last for extensibility */
-};
-
-#endif				/* _BLACKFIN_UCONTEXT_H */
+#include <asm-generic/ucontext.h>
diff --git a/arch/blackfin/include/asm/unaligned.h b/arch/blackfin/include/asm/unaligned.h
index fd8a1d63494..6cecbbb2111 100644
--- a/arch/blackfin/include/asm/unaligned.h
+++ b/arch/blackfin/include/asm/unaligned.h
@@ -1,11 +1 @@
-#ifndef _ASM_BLACKFIN_UNALIGNED_H
-#define _ASM_BLACKFIN_UNALIGNED_H
-
-#include <linux/unaligned/le_struct.h>
-#include <linux/unaligned/be_byteshift.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned	__get_unaligned_le
-#define put_unaligned	__put_unaligned_le
-
-#endif /* _ASM_BLACKFIN_UNALIGNED_H */
+#include <asm-generic/unaligned.h>
diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h
index da35133c171..c8e7ee4768c 100644
--- a/arch/blackfin/include/asm/unistd.h
+++ b/arch/blackfin/include/asm/unistd.h
@@ -381,8 +381,9 @@
 #define __NR_preadv		366
 #define __NR_pwritev		367
 #define __NR_rt_tgsigqueueinfo	368
+#define __NR_perf_counter_open	369
 
-#define __NR_syscall		369
+#define __NR_syscall		370
 #define NR_syscalls		__NR_syscall
 
 /* Old optional stuff no one actually uses */
diff --git a/arch/blackfin/include/asm/user.h b/arch/blackfin/include/asm/user.h
index afe6a0e1f7c..4792a60831e 100644
--- a/arch/blackfin/include/asm/user.h
+++ b/arch/blackfin/include/asm/user.h
@@ -1,89 +1 @@
-#ifndef _BFIN_USER_H
-#define _BFIN_USER_H
-
-/* Changes by Tony Kou   Lineo, Inc.  July, 2001
- *
- * Based include/asm-m68knommu/user.h
- *
- */
-
-/* Core file format: The core file is written in such a way that gdb
-   can understand it and provide useful information to the user (under
-   linux we use the 'trad-core' bfd).  There are quite a number of
-   obstacles to being able to view the contents of the floating point
-   registers, and until these are solved you will not be able to view the
-   contents of them.  Actually, you can read in the core file and look at
-   the contents of the user struct to find out what the floating point
-   registers contain.
-   The actual file contents are as follows:
-   UPAGE: 1 page consisting of a user struct that tells gdb what is present
-   in the file.  Directly after this is a copy of the task_struct, which
-   is currently not used by gdb, but it may come in useful at some point.
-   All of the registers are stored as part of the upage.  The upage should
-   always be only one page.
-   DATA: The data area is stored.  We use current->end_text to
-   current->brk to pick up all of the user variables, plus any memory
-   that may have been malloced.  No attempt is made to determine if a page
-   is demand-zero or if a page is totally unused, we just cover the entire
-   range.  All of the addresses are rounded in such a way that an integral
-   number of pages is written.
-   STACK: We need the stack information in order to get a meaningful
-   backtrace.  We need to write the data from (esp) to
-   current->start_stack, so we round each of these off in order to be able
-   to write an integer number of pages.
-   The minimum core file size is 3 pages, or 12288 bytes.
-*/
-struct user_bfinfp_struct {
-};
-
-/* This is the old layout of "struct pt_regs" as of Linux 1.x, and
-   is still the layout used by user (the new pt_regs doesn't have
-   all registers). */
-struct user_regs_struct {
-	long r0, r1, r2, r3, r4, r5, r6, r7;
-	long p0, p1, p2, p3, p4, p5, usp, fp;
-	long i0, i1, i2, i3;
-	long l0, l1, l2, l3;
-	long b0, b1, b2, b3;
-	long m0, m1, m2, m3;
-	long a0w, a1w;
-	long a0x, a1x;
-	unsigned long rets;
-	unsigned long astat;
-	unsigned long pc;
-	unsigned long orig_p0;
-};
-
-/* When the kernel dumps core, it starts by dumping the user struct -
-   this will be used by gdb to figure out where the data and stack segments
-   are within the file, and what virtual addresses to use. */
-
-struct user {
-/* We start with the registers, to mimic the way that "memory" is returned
-   from the ptrace(3,...) function.  */
-
-	struct user_regs_struct regs;	/* Where the registers are actually stored */
-
-/* The rest of this junk is to help gdb figure out what goes where */
-	unsigned long int u_tsize;	/* Text segment size (pages). */
-	unsigned long int u_dsize;	/* Data segment size (pages). */
-	unsigned long int u_ssize;	/* Stack segment size (pages). */
-	unsigned long start_code;	/* Starting virtual address of text. */
-	unsigned long start_stack;	/* Starting virtual address of stack area.
-					   This is actually the bottom of the stack,
-					   the top of the stack is always found in the
-					   esp register.  */
-	long int signal;	/* Signal that caused the core dump. */
-	int reserved;		/* No longer used */
-	unsigned long u_ar0;
-	/* Used by gdb to help find the values for */
-	/* the registers. */
-	unsigned long magic;	/* To uniquely identify a core file */
-	char u_comm[32];	/* User command that was responsible */
-};
-#define NBPG PAGE_SIZE
-#define UPAGES 1
-#define HOST_TEXT_START_ADDR (u.start_code)
-#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
-
-#endif
+#include <asm-generic/user.h>
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index 3731088e181..141d9281e4b 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -20,7 +20,6 @@ obj-$(CONFIG_FUNCTION_GRAPH_TRACER)  += ftrace.o
 CFLAGS_REMOVE_ftrace.o = -pg
 
 obj-$(CONFIG_IPIPE)                  += ipipe.o
-obj-$(CONFIG_IPIPE_TRACE_MCOUNT)     += mcount.o
 obj-$(CONFIG_BFIN_GPTIMERS)          += gptimers.o
 obj-$(CONFIG_CPLB_INFO)              += cplbinfo.o
 obj-$(CONFIG_MODULES)                += module.o
diff --git a/arch/blackfin/kernel/bfin_ksyms.c b/arch/blackfin/kernel/bfin_ksyms.c
index aa05e638fb7..ed8392c117e 100644
--- a/arch/blackfin/kernel/bfin_ksyms.c
+++ b/arch/blackfin/kernel/bfin_ksyms.c
@@ -10,6 +10,7 @@
 #include <linux/uaccess.h>
 
 #include <asm/cacheflush.h>
+#include <asm/io.h>
 
 /* Allow people to have their own Blackfin exception handler in a module */
 EXPORT_SYMBOL(bfin_return_from_exception);
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
index c006a44527b..36193eed9a1 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
@@ -46,13 +46,13 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
 
 	printk(KERN_INFO "MPU: setting up cplb tables with memory protection\n");
 
-#ifdef CONFIG_BFIN_ICACHE
+#ifdef CONFIG_BFIN_EXTMEM_ICACHEABLE
 	i_cache = CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND;
 #endif
 
-#ifdef CONFIG_BFIN_DCACHE
+#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE
 	d_cache = CPLB_L1_CHBL;
-#ifdef CONFIG_BFIN_WT
+#ifdef CONFIG_BFIN_EXTMEM_WRITETROUGH
 	d_cache |= CPLB_L1_AOW | CPLB_WT;
 #endif
 #endif
@@ -91,9 +91,9 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
 	/* Cover L2 memory */
 #if L2_LENGTH > 0
 	dcplb_tbl[cpu][i_d].addr = L2_START;
-	dcplb_tbl[cpu][i_d++].data = L2_DMEMORY | PAGE_SIZE_1MB;
+	dcplb_tbl[cpu][i_d++].data = L2_DMEMORY;
 	icplb_tbl[cpu][i_i].addr = L2_START;
-	icplb_tbl[cpu][i_i++].data = L2_IMEMORY | PAGE_SIZE_1MB;
+	icplb_tbl[cpu][i_i++].data = L2_IMEMORY;
 #endif
 
 	first_mask_dcplb = i_d;
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
index 784923e52a9..bcdfe9b0b71 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
@@ -150,15 +150,19 @@ static noinline int dcplb_miss(unsigned int cpu)
 	nr_dcplb_miss[cpu]++;
 
 	d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB;
-#ifdef CONFIG_BFIN_DCACHE
+#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE
 	if (bfin_addr_dcacheable(addr)) {
 		d_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND;
-#ifdef CONFIG_BFIN_WT
+# ifdef CONFIG_BFIN_EXTMEM_WRITETHROUGH
 		d_data |= CPLB_L1_AOW | CPLB_WT;
-#endif
+# endif
 	}
 #endif
-	if (addr >= physical_mem_end) {
+
+	if (L2_LENGTH && addr >= L2_START && addr < L2_START + L2_LENGTH) {
+		addr = L2_START;
+		d_data = L2_DMEMORY;
+	} else if (addr >= physical_mem_end) {
 		if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE
 		    && (status & FAULT_USERSUPV)) {
 			addr &= ~0x3fffff;
@@ -235,7 +239,7 @@ static noinline int icplb_miss(unsigned int cpu)
 
 	i_data = CPLB_VALID | CPLB_PORTPRIO | PAGE_SIZE_4KB;
 
-#ifdef CONFIG_BFIN_ICACHE
+#ifdef CONFIG_BFIN_EXTMEM_ICACHEABLE
 	/*
 	 * Normal RAM, and possibly the reserved memory area, are
 	 * cacheable.
@@ -245,7 +249,10 @@ static noinline int icplb_miss(unsigned int cpu)
 		i_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND;
 #endif
 
-	if (addr >= physical_mem_end) {
+	if (L2_LENGTH && addr >= L2_START && addr < L2_START + L2_LENGTH) {
+		addr = L2_START;
+		i_data = L2_IMEMORY;
+	} else if (addr >= physical_mem_end) {
 		if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH
 		    && (status & FAULT_USERSUPV)) {
 			addr &= ~(1 * 1024 * 1024 - 1);
@@ -365,13 +372,18 @@ void set_mask_dcplbs(unsigned long *masks, unsigned int cpu)
 	local_irq_save_hw(flags);
 	current_rwx_mask[cpu] = masks;
 
-	d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB;
-#ifdef CONFIG_BFIN_DCACHE
-	d_data |= CPLB_L1_CHBL;
-#ifdef CONFIG_BFIN_WT
-	d_data |= CPLB_L1_AOW | CPLB_WT;
-#endif
+	if (L2_LENGTH && addr >= L2_START && addr < L2_START + L2_LENGTH) {
+		addr = L2_START;
+		d_data = L2_DMEMORY;
+	} else {
+		d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB;
+#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE
+		d_data |= CPLB_L1_CHBL;
+# ifdef CONFIG_BFIN_EXTMEM_WRITETHROUGH
+		d_data |= CPLB_L1_AOW | CPLB_WT;
+# endif
 #endif
+	}
 
 	disable_dcplb();
 	for (i = first_mask_dcplb; i < first_switched_dcplb; i++) {
diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c
index d8cde1fc5cb..b8d22034b9a 100644
--- a/arch/blackfin/kernel/ipipe.c
+++ b/arch/blackfin/kernel/ipipe.c
@@ -52,7 +52,7 @@ EXPORT_SYMBOL(__ipipe_freq_scale);
 
 atomic_t __ipipe_irq_lvdepth[IVG15 + 1];
 
-unsigned long __ipipe_irq_lvmask = __all_masked_irq_flags;
+unsigned long __ipipe_irq_lvmask = bfin_no_irqs;
 EXPORT_SYMBOL(__ipipe_irq_lvmask);
 
 static void __ipipe_ack_irq(unsigned irq, struct irq_desc *desc)
@@ -342,8 +342,3 @@ void ___ipipe_sync_pipeline(unsigned long syncmask)
 }
 
 EXPORT_SYMBOL(show_stack);
-
-#ifdef CONFIG_IPIPE_TRACE_MCOUNT
-void notrace _mcount(void);
-EXPORT_SYMBOL(_mcount);
-#endif /* CONFIG_IPIPE_TRACE_MCOUNT */
diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c
index 6e31e935bb3..4b5fd36187d 100644
--- a/arch/blackfin/kernel/irqchip.c
+++ b/arch/blackfin/kernel/irqchip.c
@@ -38,38 +38,15 @@
 #include <asm/pda.h>
 
 static atomic_t irq_err_count;
-static spinlock_t irq_controller_lock;
-
-/*
- * Dummy mask/unmask handler
- */
-void dummy_mask_unmask_irq(unsigned int irq)
-{
-}
-
 void ack_bad_irq(unsigned int irq)
 {
 	atomic_inc(&irq_err_count);
 	printk(KERN_ERR "IRQ: spurious interrupt %d\n", irq);
 }
 
-static struct irq_chip bad_chip = {
-	.ack = dummy_mask_unmask_irq,
-	.mask = dummy_mask_unmask_irq,
-	.unmask = dummy_mask_unmask_irq,
-};
-
-static int bad_stats;
 static struct irq_desc bad_irq_desc = {
-	.status = IRQ_DISABLED,
-	.chip = &bad_chip,
 	.handle_irq = handle_bad_irq,
-	.depth = 1,
 	.lock = __SPIN_LOCK_UNLOCKED(irq_desc->lock),
-	.kstat_irqs = &bad_stats,
-#ifdef CONFIG_SMP
-	.affinity = CPU_MASK_ALL
-#endif
 };
 
 #ifdef CONFIG_CPUMASK_OFFSTACK
@@ -77,6 +54,7 @@ static struct irq_desc bad_irq_desc = {
 #error "Blackfin architecture does not support CONFIG_CPUMASK_OFFSTACK."
 #endif
 
+#ifdef CONFIG_PROC_FS
 int show_interrupts(struct seq_file *p, void *v)
 {
 	int i = *(loff_t *) v, j;
@@ -108,50 +86,29 @@ int show_interrupts(struct seq_file *p, void *v)
 	}
 	return 0;
 }
-
-/*
- * do_IRQ handles all hardware IRQs.  Decoded IRQs should not
- * come via this function.  Instead, they should provide their
- * own 'handler'
- */
-#ifdef CONFIG_DO_IRQ_L1
-__attribute__((l1_text))
-#endif
-asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
-{
-	struct pt_regs *old_regs;
-	struct irq_desc *desc = irq_desc + irq;
-#ifndef CONFIG_IPIPE
-	unsigned short pending, other_ints;
 #endif
-	old_regs = set_irq_regs(regs);
 
-	/*
-	 * Some hardware gives randomly wrong interrupts.  Rather
-	 * than crashing, do something sensible.
-	 */
-	if (irq >= NR_IRQS)
-		desc = &bad_irq_desc;
-
-	irq_enter();
 #ifdef CONFIG_DEBUG_STACKOVERFLOW
+static void check_stack_overflow(int irq)
+{
 	/* Debugging check for stack overflow: is there less than STACK_WARN free? */
-	{
-		long sp;
-
-		sp = __get_SP() & (THREAD_SIZE-1);
+	long sp = __get_SP() & (THREAD_SIZE - 1);
 
-		if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) {
-			dump_stack();
-			printk(KERN_EMERG "%s: possible stack overflow while handling irq %i "
-					" only %ld bytes free\n",
-				__func__, irq, sp - sizeof(struct thread_info));
-		}
+	if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) {
+		dump_stack();
+		pr_emerg("irq%i: possible stack overflow only %ld bytes free\n",
+			irq, sp - sizeof(struct thread_info));
 	}
+}
+#else
+static inline void check_stack_overflow(int irq) { }
 #endif
-	generic_handle_irq(irq);
 
 #ifndef CONFIG_IPIPE
+static void maybe_lower_to_irq14(void)
+{
+	unsigned short pending, other_ints;
+
 	/*
 	 * If we're the only interrupt running (ignoring IRQ15 which
 	 * is for syscalls), lower our priority to IRQ14 so that
@@ -165,7 +122,38 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 	other_ints = pending & (pending - 1);
 	if (other_ints == 0)
 		lower_to_irq14();
-#endif /* !CONFIG_IPIPE */
+}
+#else
+static inline void maybe_lower_to_irq14(void) { }
+#endif
+
+/*
+ * do_IRQ handles all hardware IRQs.  Decoded IRQs should not
+ * come via this function.  Instead, they should provide their
+ * own 'handler'
+ */
+#ifdef CONFIG_DO_IRQ_L1
+__attribute__((l1_text))
+#endif
+asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
+{
+	struct pt_regs *old_regs = set_irq_regs(regs);
+
+	irq_enter();
+
+	check_stack_overflow(irq);
+
+	/*
+	 * Some hardware gives randomly wrong interrupts.  Rather
+	 * than crashing, do something sensible.
+	 */
+	if (irq >= NR_IRQS)
+		handle_bad_irq(irq, &bad_irq_desc);
+	else
+		generic_handle_irq(irq);
+
+	maybe_lower_to_irq14();
+
 	irq_exit();
 
 	set_irq_regs(old_regs);
@@ -173,14 +161,6 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 
 void __init init_IRQ(void)
 {
-	struct irq_desc *desc;
-	int irq;
-
-	spin_lock_init(&irq_controller_lock);
-	for (irq = 0, desc = irq_desc; irq < NR_IRQS; irq++, desc++) {
-		*desc = bad_irq_desc;
-	}
-
 	init_arch_irq();
 
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c
index da28f796ad7..cce79d05b90 100644
--- a/arch/blackfin/kernel/kgdb.c
+++ b/arch/blackfin/kernel/kgdb.c
@@ -34,15 +34,6 @@ int gdb_bfin_vector = -1;
 #error change the definition of slavecpulocks
 #endif
 
-#define IN_MEM(addr, size, l1_addr, l1_size) \
-({ \
-	unsigned long __addr = (unsigned long)(addr); \
-	(l1_size && __addr >= l1_addr && __addr + (size) <= l1_addr + l1_size); \
-})
-#define ASYNC_BANK_SIZE \
-	(ASYNC_BANK0_SIZE + ASYNC_BANK1_SIZE + \
-	 ASYNC_BANK2_SIZE + ASYNC_BANK3_SIZE)
-
 void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 {
 	gdb_regs[BFIN_R0] = regs->r0;
@@ -463,41 +454,88 @@ static int hex(char ch)
 
 static int validate_memory_access_address(unsigned long addr, int size)
 {
-	int cpu = raw_smp_processor_id();
-
-	if (size < 0)
+	if (size < 0 || addr == 0)
 		return -EFAULT;
-	if (addr >= 0x1000 && (addr + size) <= physical_mem_end)
-		return 0;
-	if (addr >= SYSMMR_BASE)
-		return 0;
-	if (IN_MEM(addr, size, ASYNC_BANK0_BASE, ASYNC_BANK_SIZE))
-		return 0;
-	if (cpu == 0) {
-		if (IN_MEM(addr, size, L1_SCRATCH_START, L1_SCRATCH_LENGTH))
-			return 0;
-		if (IN_MEM(addr, size, L1_CODE_START, L1_CODE_LENGTH))
-			return 0;
-		if (IN_MEM(addr, size, L1_DATA_A_START, L1_DATA_A_LENGTH))
-			return 0;
-		if (IN_MEM(addr, size, L1_DATA_B_START, L1_DATA_B_LENGTH))
-			return 0;
-#ifdef CONFIG_SMP
-	} else if (cpu == 1) {
-		if (IN_MEM(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
+	return bfin_mem_access_type(addr, size);
+}
+
+static int bfin_probe_kernel_read(char *dst, char *src, int size)
+{
+	unsigned long lsrc = (unsigned long)src;
+	int mem_type;
+
+	mem_type = validate_memory_access_address(lsrc, size);
+	if (mem_type < 0)
+		return mem_type;
+
+	if (lsrc >= SYSMMR_BASE) {
+		if (size == 2 && lsrc % 2 == 0) {
+			u16 mmr = bfin_read16(src);
+			memcpy(dst, &mmr, sizeof(mmr));
 			return 0;
-		if (IN_MEM(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
+		} else if (size == 4 && lsrc % 4 == 0) {
+			u32 mmr = bfin_read32(src);
+			memcpy(dst, &mmr, sizeof(mmr));
 			return 0;
-		if (IN_MEM(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
+		}
+	} else {
+		switch (mem_type) {
+			case BFIN_MEM_ACCESS_CORE:
+			case BFIN_MEM_ACCESS_CORE_ONLY:
+				return probe_kernel_read(dst, src, size);
+			/* XXX: should support IDMA here with SMP */
+			case BFIN_MEM_ACCESS_DMA:
+				if (dma_memcpy(dst, src, size))
+					return 0;
+				break;
+			case BFIN_MEM_ACCESS_ITEST:
+				if (isram_memcpy(dst, src, size))
+					return 0;
+				break;
+		}
+	}
+
+	return -EFAULT;
+}
+
+static int bfin_probe_kernel_write(char *dst, char *src, int size)
+{
+	unsigned long ldst = (unsigned long)dst;
+	int mem_type;
+
+	mem_type = validate_memory_access_address(ldst, size);
+	if (mem_type < 0)
+		return mem_type;
+
+	if (ldst >= SYSMMR_BASE) {
+		if (size == 2 && ldst % 2 == 0) {
+			u16 mmr;
+			memcpy(&mmr, src, sizeof(mmr));
+			bfin_write16(dst, mmr);
 			return 0;
-		if (IN_MEM(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
+		} else if (size == 4 && ldst % 4 == 0) {
+			u32 mmr;
+			memcpy(&mmr, src, sizeof(mmr));
+			bfin_write32(dst, mmr);
 			return 0;
-#endif
+		}
+	} else {
+		switch (mem_type) {
+			case BFIN_MEM_ACCESS_CORE:
+			case BFIN_MEM_ACCESS_CORE_ONLY:
+				return probe_kernel_write(dst, src, size);
+			/* XXX: should support IDMA here with SMP */
+			case BFIN_MEM_ACCESS_DMA:
+				if (dma_memcpy(dst, src, size))
+					return 0;
+				break;
+			case BFIN_MEM_ACCESS_ITEST:
+				if (isram_memcpy(dst, src, size))
+					return 0;
+				break;
+		}
 	}
 
-	if (IN_MEM(addr, size, L2_START, L2_LENGTH))
-		return 0;
-
 	return -EFAULT;
 }
 
@@ -509,14 +547,6 @@ int kgdb_mem2hex(char *mem, char *buf, int count)
 {
 	char *tmp;
 	int err;
-	unsigned char *pch;
-	unsigned short mmr16;
-	unsigned long mmr32;
-	int cpu = raw_smp_processor_id();
-
-	err = validate_memory_access_address((unsigned long)mem, count);
-	if (err)
-		return err;
 
 	/*
 	 * We use the upper half of buf as an intermediate buffer for the
@@ -524,44 +554,7 @@ int kgdb_mem2hex(char *mem, char *buf, int count)
 	 */
 	tmp = buf + count;
 
-	if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/
-		switch (count) {
-		case 2:
-			if ((unsigned int)mem % 2 == 0) {
-				mmr16 = *(unsigned short *)mem;
-				pch = (unsigned char *)&mmr16;
-				*tmp++ = *pch++;
-				*tmp++ = *pch++;
-				tmp -= 2;
-			} else
-				err = -EFAULT;
-			break;
-		case 4:
-			if ((unsigned int)mem % 4 == 0) {
-				mmr32 = *(unsigned long *)mem;
-				pch = (unsigned char *)&mmr32;
-				*tmp++ = *pch++;
-				*tmp++ = *pch++;
-				*tmp++ = *pch++;
-				*tmp++ = *pch++;
-				tmp -= 4;
-			} else
-				err = -EFAULT;
-			break;
-		default:
-			err = -EFAULT;
-		}
-	} else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH))
-#ifdef CONFIG_SMP
-		|| (cpu == 1 && IN_MEM(mem, count, COREB_L1_CODE_START, L1_CODE_LENGTH))
-#endif
-		) {
-		/* access L1 instruction SRAM*/
-		if (dma_memcpy(tmp, mem, count) == NULL)
-			err = -EFAULT;
-	} else
-		err = probe_kernel_read(tmp, mem, count);
-
+	err = bfin_probe_kernel_read(tmp, mem, count);
 	if (!err) {
 		while (count > 0) {
 			buf = pack_hex_byte(buf, *tmp);
@@ -582,13 +575,8 @@ int kgdb_mem2hex(char *mem, char *buf, int count)
  */
 int kgdb_ebin2mem(char *buf, char *mem, int count)
 {
-	char *tmp_old;
-	char *tmp_new;
-	unsigned short *mmr16;
-	unsigned long *mmr32;
-	int err;
+	char *tmp_old, *tmp_new;
 	int size;
-	int cpu = raw_smp_processor_id();
 
 	tmp_old = tmp_new = buf;
 
@@ -601,41 +589,7 @@ int kgdb_ebin2mem(char *buf, char *mem, int count)
 		tmp_old++;
 	}
 
-	err = validate_memory_access_address((unsigned long)mem, size);
-	if (err)
-		return err;
-
-	if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/
-		switch (size) {
-		case 2:
-			if ((unsigned int)mem % 2 == 0) {
-				mmr16 = (unsigned short *)buf;
-				*(unsigned short *)mem = *mmr16;
-			} else
-				err = -EFAULT;
-			break;
-		case 4:
-			if ((unsigned int)mem % 4 == 0) {
-				mmr32 = (unsigned long *)buf;
-				*(unsigned long *)mem = *mmr32;
-			} else
-				err = -EFAULT;
-			break;
-		default:
-			err = -EFAULT;
-		}
-	} else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH))
-#ifdef CONFIG_SMP
-		|| (cpu == 1 && IN_MEM(mem, count, COREB_L1_CODE_START, L1_CODE_LENGTH))
-#endif
-		) {
-		/* access L1 instruction SRAM */
-		if (dma_memcpy(mem, buf, size) == NULL)
-			err = -EFAULT;
-	} else
-		err = probe_kernel_write(mem, buf, size);
-
-	return err;
+	return bfin_probe_kernel_write(mem, buf, count);
 }
 
 /*
@@ -645,16 +599,7 @@ int kgdb_ebin2mem(char *buf, char *mem, int count)
  */
 int kgdb_hex2mem(char *buf, char *mem, int count)
 {
-	char *tmp_raw;
-	char *tmp_hex;
-	unsigned short *mmr16;
-	unsigned long *mmr32;
-	int err;
-	int cpu = raw_smp_processor_id();
-
-	err = validate_memory_access_address((unsigned long)mem, count);
-	if (err)
-		return err;
+	char *tmp_raw, *tmp_hex;
 
 	/*
 	 * We use the upper half of buf as an intermediate buffer for the
@@ -669,39 +614,18 @@ int kgdb_hex2mem(char *buf, char *mem, int count)
 		*tmp_raw |= hex(*tmp_hex--) << 4;
 	}
 
-	if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/
-		switch (count) {
-		case 2:
-			if ((unsigned int)mem % 2 == 0) {
-				mmr16 = (unsigned short *)tmp_raw;
-				*(unsigned short *)mem = *mmr16;
-			} else
-				err = -EFAULT;
-			break;
-		case 4:
-			if ((unsigned int)mem % 4 == 0) {
-				mmr32 = (unsigned long *)tmp_raw;
-				*(unsigned long *)mem = *mmr32;
-			} else
-				err = -EFAULT;
-			break;
-		default:
-			err = -EFAULT;
-		}
-	} else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH))
-#ifdef CONFIG_SMP
-		|| (cpu == 1 && IN_MEM(mem, count, COREB_L1_CODE_START, L1_CODE_LENGTH))
-#endif
-		) {
-		/* access L1 instruction SRAM */
-		if (dma_memcpy(mem, tmp_raw, count) == NULL)
-			err = -EFAULT;
-	} else
-		err = probe_kernel_write(mem, tmp_raw, count);
-
-	return err;
+	return bfin_probe_kernel_write(mem, tmp_raw, count);
 }
 
+#define IN_MEM(addr, size, l1_addr, l1_size) \
+({ \
+	unsigned long __addr = (unsigned long)(addr); \
+	(l1_size && __addr >= l1_addr && __addr + (size) <= l1_addr + l1_size); \
+})
+#define ASYNC_BANK_SIZE \
+	(ASYNC_BANK0_SIZE + ASYNC_BANK1_SIZE + \
+	 ASYNC_BANK2_SIZE + ASYNC_BANK3_SIZE)
+
 int kgdb_validate_break_address(unsigned long addr)
 {
 	int cpu = raw_smp_processor_id();
@@ -724,46 +648,17 @@ int kgdb_validate_break_address(unsigned long addr)
 
 int kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr)
 {
-	int err;
-	int cpu = raw_smp_processor_id();
-
-	if ((cpu == 0 && IN_MEM(addr, BREAK_INSTR_SIZE, L1_CODE_START, L1_CODE_LENGTH))
-#ifdef CONFIG_SMP
-		|| (cpu == 1 && IN_MEM(addr, BREAK_INSTR_SIZE, COREB_L1_CODE_START, L1_CODE_LENGTH))
-#endif
-		) {
-		/* access L1 instruction SRAM */
-		if (dma_memcpy(saved_instr, (void *)addr, BREAK_INSTR_SIZE)
-			== NULL)
-			return -EFAULT;
-
-		if (dma_memcpy((void *)addr, arch_kgdb_ops.gdb_bpt_instr,
-			BREAK_INSTR_SIZE) == NULL)
-			return -EFAULT;
-
-		return 0;
-	} else {
-		err = probe_kernel_read(saved_instr, (char *)addr,
-			BREAK_INSTR_SIZE);
-		if (err)
-			return err;
-
-		return probe_kernel_write((char *)addr,
-			arch_kgdb_ops.gdb_bpt_instr, BREAK_INSTR_SIZE);
-	}
+	int err = bfin_probe_kernel_read(saved_instr, (char *)addr,
+	                                 BREAK_INSTR_SIZE);
+	if (err)
+		return err;
+	return bfin_probe_kernel_write((char *)addr, arch_kgdb_ops.gdb_bpt_instr,
+	                               BREAK_INSTR_SIZE);
 }
 
 int kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle)
 {
-	if (IN_MEM(addr, BREAK_INSTR_SIZE, L1_CODE_START, L1_CODE_LENGTH)) {
-		/* access L1 instruction SRAM */
-		if (dma_memcpy((void *)addr, bundle, BREAK_INSTR_SIZE) == NULL)
-			return -EFAULT;
-
-		return 0;
-	} else
-		return probe_kernel_write((char *)addr,
-				(char *)bundle, BREAK_INSTR_SIZE);
+	return bfin_probe_kernel_write((char *)addr, bundle, BREAK_INSTR_SIZE);
 }
 
 int kgdb_arch_init(void)
diff --git a/arch/blackfin/kernel/mcount.S b/arch/blackfin/kernel/mcount.S
deleted file mode 100644
index edcfb3865f4..00000000000
--- a/arch/blackfin/kernel/mcount.S
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * linux/arch/blackfin/mcount.S
- *
- * Copyright (C) 2006 Analog Devices Inc.
- *
- * 2007/04/12 Save index, length, modify and base registers. --rpm
- */
-
-#include <linux/linkage.h>
-#include <asm/blackfin.h>
-
-.text
-
-.align 4 	/* just in case */
-
-ENTRY(__mcount)
-	[--sp] = i0;
-	[--sp] = i1;
-	[--sp] = i2;
-	[--sp] = i3;
-	[--sp] = l0;
-	[--sp] = l1;
-	[--sp] = l2;
-	[--sp] = l3;
-	[--sp] = m0;
-	[--sp] = m1;
-	[--sp] = m2;
-	[--sp] = m3;
-	[--sp] = b0;
-	[--sp] = b1;
-	[--sp] = b2;
-	[--sp] = b3;
-	[--sp] = ( r7:0, p5:0 );
-	[--sp] = ASTAT;
-
-	p1.L = _ipipe_trace_enable;
-	p1.H = _ipipe_trace_enable;
-	r7 = [p1];
-	CC = r7 == 0;
-	if CC jump out;
-	link 0x10;
-	r0 = 0x0;
-	[sp + 0xc] = r0; /* v */
-	r0 = 0x0;	/* type: IPIPE_TRACE_FN */
-	r1 = rets;
-	p0 = [fp];	/* p0: Prior FP */
-	r2 = [p0 + 4];	/* r2: Prior RETS */
-	call ___ipipe_trace;
-	unlink;
-out:
-	ASTAT = [sp++];
-	( r7:0, p5:0 ) = [sp++];
-	b3 = [sp++];
-	b2 = [sp++];
-	b1 = [sp++];
-	b0 = [sp++];
-	m3 = [sp++];
-	m2 = [sp++];
-	m1 = [sp++];
-	m0 = [sp++];
-	l3 = [sp++];
-	l2 = [sp++];
-	l1 = [sp++];
-	l0 = [sp++];
-	i3 = [sp++];
-	i2 = [sp++];
-	i1 = [sp++];
-	i0 = [sp++];
-	rts;
-ENDPROC(__mcount)
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 30d0843ed70..79cad0ac589 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -160,6 +160,29 @@ pid_t kernel_thread(int (*fn) (void *), void *arg, unsigned long flags)
 }
 EXPORT_SYMBOL(kernel_thread);
 
+/*
+ * Do necessary setup to start up a newly executed thread.
+ *
+ * pass the data segment into user programs if it exists,
+ * it can't hurt anything as far as I can tell
+ */
+void start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp)
+{
+	set_fs(USER_DS);
+	regs->pc = new_ip;
+	if (current->mm)
+		regs->p5 = current->mm->start_data;
+#ifdef CONFIG_SMP
+	task_thread_info(current)->l1_task_info.stack_start =
+		(void *)current->mm->context.stack_start;
+	task_thread_info(current)->l1_task_info.lowest_sp = (void *)new_sp;
+	memcpy(L1_SCRATCH_TASK_INFO, &task_thread_info(current)->l1_task_info,
+	       sizeof(*L1_SCRATCH_TASK_INFO));
+#endif
+	wrusp(new_sp);
+}
+EXPORT_SYMBOL_GPL(start_thread);
+
 void flush_thread(void)
 {
 }
@@ -321,6 +344,87 @@ void finish_atomic_sections (struct pt_regs *regs)
 	}
 }
 
+static inline
+int in_mem(unsigned long addr, unsigned long size,
+           unsigned long start, unsigned long end)
+{
+	return addr >= start && addr + size <= end;
+}
+static inline
+int in_mem_const_off(unsigned long addr, unsigned long size, unsigned long off,
+                     unsigned long const_addr, unsigned long const_size)
+{
+	return const_size &&
+	       in_mem(addr, size, const_addr + off, const_addr + const_size);
+}
+static inline
+int in_mem_const(unsigned long addr, unsigned long size,
+                 unsigned long const_addr, unsigned long const_size)
+{
+	return in_mem_const_off(addr, 0, size, const_addr, const_size);
+}
+#define IN_ASYNC(bnum, bctlnum) \
+({ \
+	(bfin_read_EBIU_AMGCTL() & 0xe) < ((bnum + 1) << 1) ? -EFAULT : \
+	bfin_read_EBIU_AMBCTL##bctlnum() & B##bnum##RDYEN ? -EFAULT : \
+	BFIN_MEM_ACCESS_CORE; \
+})
+
+int bfin_mem_access_type(unsigned long addr, unsigned long size)
+{
+	int cpu = raw_smp_processor_id();
+
+	/* Check that things do not wrap around */
+	if (addr > ULONG_MAX - size)
+		return -EFAULT;
+
+	if (in_mem(addr, size, FIXED_CODE_START, physical_mem_end))
+		return BFIN_MEM_ACCESS_CORE;
+
+	if (in_mem_const(addr, size, L1_CODE_START, L1_CODE_LENGTH))
+		return cpu == 0 ? BFIN_MEM_ACCESS_ITEST : BFIN_MEM_ACCESS_IDMA;
+	if (in_mem_const(addr, size, L1_SCRATCH_START, L1_SCRATCH_LENGTH))
+		return cpu == 0 ? BFIN_MEM_ACCESS_CORE_ONLY : -EFAULT;
+	if (in_mem_const(addr, size, L1_DATA_A_START, L1_DATA_A_LENGTH))
+		return cpu == 0 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
+	if (in_mem_const(addr, size, L1_DATA_B_START, L1_DATA_B_LENGTH))
+		return cpu == 0 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
+#ifdef COREB_L1_CODE_START
+	if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
+		return cpu == 1 ? BFIN_MEM_ACCESS_ITEST : BFIN_MEM_ACCESS_IDMA;
+	if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
+		return cpu == 1 ? BFIN_MEM_ACCESS_CORE_ONLY : -EFAULT;
+	if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
+		return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
+	if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
+		return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
+#endif
+	if (in_mem_const(addr, size, L2_START, L2_LENGTH))
+		return BFIN_MEM_ACCESS_CORE;
+
+	if (addr >= SYSMMR_BASE)
+		return BFIN_MEM_ACCESS_CORE_ONLY;
+
+	/* We can't read EBIU banks that aren't enabled or we end up hanging
+	 * on the access to the async space.
+	 */
+	if (in_mem_const(addr, size, ASYNC_BANK0_BASE, ASYNC_BANK0_SIZE))
+		return IN_ASYNC(0, 0);
+	if (in_mem_const(addr, size, ASYNC_BANK1_BASE, ASYNC_BANK1_SIZE))
+		return IN_ASYNC(1, 0);
+	if (in_mem_const(addr, size, ASYNC_BANK2_BASE, ASYNC_BANK2_SIZE))
+		return IN_ASYNC(2, 1);
+	if (in_mem_const(addr, size, ASYNC_BANK3_BASE, ASYNC_BANK3_SIZE))
+		return IN_ASYNC(3, 1);
+
+	if (in_mem_const(addr, size, BOOT_ROM_START, BOOT_ROM_LENGTH))
+		return BFIN_MEM_ACCESS_CORE;
+	if (in_mem_const(addr, size, L1_ROM_START, L1_ROM_LENGTH))
+		return BFIN_MEM_ACCESS_DMA;
+
+	return -EFAULT;
+}
+
 #if defined(CONFIG_ACCESS_CHECK)
 #ifdef CONFIG_ACCESS_OK_L1
 __attribute__((l1_text))
@@ -330,51 +434,61 @@ int _access_ok(unsigned long addr, unsigned long size)
 {
 	if (size == 0)
 		return 1;
-	if (addr > (addr + size))
+	/* Check that things do not wrap around */
+	if (addr > ULONG_MAX - size)
 		return 0;
 	if (segment_eq(get_fs(), KERNEL_DS))
 		return 1;
 #ifdef CONFIG_MTD_UCLINUX
-	if (addr >= memory_start && (addr + size) <= memory_end)
-		return 1;
-	if (addr >= memory_mtd_end && (addr + size) <= physical_mem_end)
+	if (1)
+#else
+	if (0)
+#endif
+	{
+		if (in_mem(addr, size, memory_start, memory_end))
+			return 1;
+		if (in_mem(addr, size, memory_mtd_end, physical_mem_end))
+			return 1;
+# ifndef CONFIG_ROMFS_ON_MTD
+		if (0)
+# endif
+			/* For XIP, allow user space to use pointers within the ROMFS.  */
+			if (in_mem(addr, size, memory_mtd_start, memory_mtd_end))
+				return 1;
+	} else {
+		if (in_mem(addr, size, memory_start, physical_mem_end))
+			return 1;
+	}
+
+	if (in_mem(addr, size, (unsigned long)__init_begin, (unsigned long)__init_end))
 		return 1;
 
-#ifdef CONFIG_ROMFS_ON_MTD
-	/* For XIP, allow user space to use pointers within the ROMFS.  */
-	if (addr >= memory_mtd_start && (addr + size) <= memory_mtd_end)
+	if (in_mem_const(addr, size, L1_CODE_START, L1_CODE_LENGTH))
 		return 1;
-#endif
-#else
-	if (addr >= memory_start && (addr + size) <= physical_mem_end)
+	if (in_mem_const_off(addr, size, _etext_l1 - _stext_l1, L1_CODE_START, L1_CODE_LENGTH))
 		return 1;
-#endif
-	if (addr >= (unsigned long)__init_begin &&
-	    addr + size <= (unsigned long)__init_end)
+	if (in_mem_const_off(addr, size, _ebss_l1 - _sdata_l1, L1_DATA_A_START, L1_DATA_A_LENGTH))
 		return 1;
-	if (addr >= get_l1_scratch_start()
-	    && addr + size <= get_l1_scratch_start() + L1_SCRATCH_LENGTH)
+	if (in_mem_const_off(addr, size, _ebss_b_l1 - _sdata_b_l1, L1_DATA_B_START, L1_DATA_B_LENGTH))
 		return 1;
-#if L1_CODE_LENGTH != 0
-	if (addr >= get_l1_code_start() + (_etext_l1 - _stext_l1)
-	    && addr + size <= get_l1_code_start() + L1_CODE_LENGTH)
+#ifdef COREB_L1_CODE_START
+	if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
 		return 1;
-#endif
-#if L1_DATA_A_LENGTH != 0
-	if (addr >= get_l1_data_a_start() + (_ebss_l1 - _sdata_l1)
-	    && addr + size <= get_l1_data_a_start() + L1_DATA_A_LENGTH)
+	if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
 		return 1;
-#endif
-#if L1_DATA_B_LENGTH != 0
-	if (addr >= get_l1_data_b_start() + (_ebss_b_l1 - _sdata_b_l1)
-	    && addr + size <= get_l1_data_b_start() + L1_DATA_B_LENGTH)
+	if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
 		return 1;
-#endif
-#if L2_LENGTH != 0
-	if (addr >= L2_START + (_ebss_l2 - _stext_l2)
-	    && addr + size <= L2_START + L2_LENGTH)
+	if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
 		return 1;
 #endif
+	if (in_mem_const_off(addr, size, _ebss_l2 - _stext_l2, L2_START, L2_LENGTH))
+		return 1;
+
+	if (in_mem_const(addr, size, BOOT_ROM_START, BOOT_ROM_LENGTH))
+		return 1;
+	if (in_mem_const(addr, size, L1_ROM_START, L1_ROM_LENGTH))
+		return 1;
+
 	return 0;
 }
 EXPORT_SYMBOL(_access_ok);
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 6454babdfaf..298f023bcc0 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -117,15 +117,49 @@ void __cpuinit bfin_setup_caches(unsigned int cpu)
 	 */
 #ifdef CONFIG_BFIN_ICACHE
 	printk(KERN_INFO "Instruction Cache Enabled for CPU%u\n", cpu);
+	printk(KERN_INFO "  External memory:"
+# ifdef CONFIG_BFIN_EXTMEM_ICACHEABLE
+	       " cacheable"
+# else
+	       " uncacheable"
+# endif
+	       " in instruction cache\n");
+	if (L2_LENGTH)
+		printk(KERN_INFO "  L2 SRAM        :"
+# ifdef CONFIG_BFIN_L2_ICACHEABLE
+		       " cacheable"
+# else
+		       " uncacheable"
+# endif
+		       " in instruction cache\n");
+
+#else
+	printk(KERN_INFO "Instruction Cache Disabled for CPU%u\n", cpu);
 #endif
+
 #ifdef CONFIG_BFIN_DCACHE
-	printk(KERN_INFO "Data Cache Enabled for CPU%u"
-# if defined CONFIG_BFIN_WB
-		" (write-back)"
-# elif defined CONFIG_BFIN_WT
-		" (write-through)"
+	printk(KERN_INFO "Data Cache Enabled for CPU%u\n", cpu);
+	printk(KERN_INFO "  External memory:"
+# if defined CONFIG_BFIN_EXTMEM_WRITEBACK
+	       " cacheable (write-back)"
+# elif defined CONFIG_BFIN_EXTMEM_WRITETHROUGH
+	       " cacheable (write-through)"
+# else
+	       " uncacheable"
 # endif
-		"\n", cpu);
+	       " in data cache\n");
+	if (L2_LENGTH)
+		printk(KERN_INFO "  L2 SRAM        :"
+# if defined CONFIG_BFIN_L2_WRITEBACK
+		       " cacheable (write-back)"
+# elif defined CONFIG_BFIN_L2_WRITETHROUGH
+		       " cacheable (write-through)"
+# else
+		       " uncacheable"
+# endif
+		       " in data cache\n");
+#else
+	printk(KERN_INFO "Data Cache Disabled for CPU%u\n", cpu);
 #endif
 }
 
@@ -443,9 +477,11 @@ static __init void parse_cmdline_early(char *cmdline_p)
 			} else if (!memcmp(to, "clkin_hz=", 9)) {
 				to += 9;
 				early_init_clkin_hz(to);
+#ifdef CONFIG_EARLY_PRINTK
 			} else if (!memcmp(to, "earlyprintk=", 12)) {
 				to += 12;
 				setup_early_printk(to);
+#endif
 			} else if (!memcmp(to, "memmap=", 7)) {
 				to += 7;
 				parse_memmap(to);
@@ -516,7 +552,7 @@ static __init void memory_setup(void)
 	    && ((unsigned long *)mtd_phys)[1] == ROMSB_WORD1)
 		mtd_size =
 		    PAGE_ALIGN(be32_to_cpu(((unsigned long *)mtd_phys)[2]));
-#  if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
+#  if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
 	/* Due to a Hardware Anomaly we need to limit the size of usable
 	 * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
 	 * 05000263 - Hardware loop corrupted when taking an ICPLB exception
@@ -544,7 +580,7 @@ static __init void memory_setup(void)
 	dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
 #endif				/* CONFIG_MTD_UCLINUX */
 
-#if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
+#if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
 	/* Due to a Hardware Anomaly we need to limit the size of usable
 	 * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
 	 * 05000263 - Hardware loop corrupted when taking an ICPLB exception
@@ -764,6 +800,11 @@ void __init setup_arch(char **cmdline_p)
 {
 	unsigned long sclk, cclk;
 
+	/* Check to make sure we are running on the right processor */
+	if (unlikely(CPUID != bfin_cpuid()))
+		printk(KERN_ERR "ERROR: Not running on ADSP-%s: unknown CPUID 0x%04x Rev 0.%d\n",
+			CPU, bfin_cpuid(), bfin_revid());
+
 #ifdef CONFIG_DUMMY_CONSOLE
 	conswitchp = &dummy_con;
 #endif
@@ -778,14 +819,17 @@ void __init setup_arch(char **cmdline_p)
 	memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
 	boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
 
-	/* setup memory defaults from the user config */
-	physical_mem_end = 0;
-	_ramend = get_mem_size() * 1024 * 1024;
-
 	memset(&bfin_memmap, 0, sizeof(bfin_memmap));
 
+	/* If the user does not specify things on the command line, use
+	 * what the bootloader set things up as
+	 */
+	physical_mem_end = 0;
 	parse_cmdline_early(&command_line[0]);
 
+	if (_ramend == 0)
+		_ramend = get_mem_size() * 1024 * 1024;
+
 	if (physical_mem_end == 0)
 		physical_mem_end = _ramend;
 
@@ -837,7 +881,8 @@ void __init setup_arch(char **cmdline_p)
     defined(CONFIG_BF538) || defined(CONFIG_BF539)
 	_bfin_swrst = bfin_read_SWRST();
 #else
-	_bfin_swrst = bfin_read_SYSCR();
+	/* Clear boot mode field */
+	_bfin_swrst = bfin_read_SYSCR() & ~0xf;
 #endif
 
 #ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
@@ -875,10 +920,7 @@ void __init setup_arch(char **cmdline_p)
 	else
 		printk(KERN_INFO "Compiled for ADSP-%s Rev 0.%d\n", CPU, bfin_compiled_revid());
 
-	if (unlikely(CPUID != bfin_cpuid()))
-		printk(KERN_ERR "ERROR: Not running on ADSP-%s: unknown CPUID 0x%04x Rev 0.%d\n",
-			CPU, bfin_cpuid(), bfin_revid());
-	else {
+	if (likely(CPUID == bfin_cpuid())) {
 		if (bfin_revid() != bfin_compiled_revid()) {
 			if (bfin_compiled_revid() == -1)
 				printk(KERN_ERR "Warning: Compiled for Rev none, but running on Rev %d\n",
@@ -1157,16 +1199,25 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		icache_size = 0;
 
 	seq_printf(m, "cache size\t: %d KB(L1 icache) "
-		"%d KB(L1 dcache%s) %d KB(L2 cache)\n",
-		icache_size, dcache_size,
-#if defined CONFIG_BFIN_WB
-		"-wb"
-#elif defined CONFIG_BFIN_WT
-		"-wt"
-#endif
-		"", 0);
-
+		"%d KB(L1 dcache) %d KB(L2 cache)\n",
+		icache_size, dcache_size, 0);
 	seq_printf(m, "%s\n", cache);
+	seq_printf(m, "external memory\t: "
+#if defined(CONFIG_BFIN_EXTMEM_ICACHEABLE)
+		   "cacheable"
+#else
+		   "uncacheable"
+#endif
+		   " in instruction cache\n");
+	seq_printf(m, "external memory\t: "
+#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK)
+		      "cacheable (write-back)"
+#elif defined(CONFIG_BFIN_EXTMEM_WRITETHROUGH)
+		      "cacheable (write-through)"
+#else
+		      "uncacheable"
+#endif
+		      " in data cache\n");
 
 	if (icache_size)
 		seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n",
@@ -1239,8 +1290,25 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	if (cpu_num != num_possible_cpus() - 1)
 		return 0;
 
-	if (L2_LENGTH)
+	if (L2_LENGTH) {
 		seq_printf(m, "L2 SRAM\t\t: %dKB\n", L2_LENGTH/0x400);
+		seq_printf(m, "L2 SRAM\t\t: "
+#if defined(CONFIG_BFIN_L2_ICACHEABLE)
+			      "cacheable"
+#else
+			      "uncacheable"
+#endif
+			      " in instruction cache\n");
+		seq_printf(m, "L2 SRAM\t\t: "
+#if defined(CONFIG_BFIN_L2_WRITEBACK)
+			      "cacheable (write-back)"
+#elif defined(CONFIG_BFIN_L2_WRITETHROUGH)
+			      "cacheable (write-through)"
+#else
+			      "uncacheable"
+#endif
+			      " in data cache\n");
+	}
 	seq_printf(m, "board name\t: %s\n", bfin_board_name);
 	seq_printf(m, "board memory\t: %ld kB (0x%p -> 0x%p)\n",
 		 physical_mem_end >> 10, (void *)0, (void *)physical_mem_end);
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index d279552fe9b..8eeb457ce5d 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -37,6 +37,7 @@
 #include <asm/traps.h>
 #include <asm/cacheflush.h>
 #include <asm/cplb.h>
+#include <asm/dma.h>
 #include <asm/blackfin.h>
 #include <asm/irq_handler.h>
 #include <linux/irq.h>
@@ -636,57 +637,30 @@ asmlinkage void trap_c(struct pt_regs *fp)
  */
 static bool get_instruction(unsigned short *val, unsigned short *address)
 {
-
-	unsigned long addr;
-
-	addr = (unsigned long)address;
+	unsigned long addr = (unsigned long)address;
 
 	/* Check for odd addresses */
 	if (addr & 0x1)
 		return false;
 
-	/* Check that things do not wrap around */
-	if (addr > (addr + 2))
+	/* MMR region will never have instructions */
+	if (addr >= SYSMMR_BASE)
 		return false;
 
-	/*
-	 * Since we are in exception context, we need to do a little address checking
-	 * We need to make sure we are only accessing valid memory, and
-	 * we don't read something in the async space that can hang forever
-	 */
-	if ((addr >= FIXED_CODE_START && (addr + 2) <= physical_mem_end) ||
-#if L2_LENGTH != 0
-	    (addr >= L2_START && (addr + 2) <= (L2_START + L2_LENGTH)) ||
-#endif
-	    (addr >= BOOT_ROM_START && (addr + 2) <= (BOOT_ROM_START + BOOT_ROM_LENGTH)) ||
-#if L1_DATA_A_LENGTH != 0
-	    (addr >= L1_DATA_A_START && (addr + 2) <= (L1_DATA_A_START + L1_DATA_A_LENGTH)) ||
-#endif
-#if L1_DATA_B_LENGTH != 0
-	    (addr >= L1_DATA_B_START && (addr + 2) <= (L1_DATA_B_START + L1_DATA_B_LENGTH)) ||
-#endif
-	    (addr >= L1_SCRATCH_START && (addr + 2) <= (L1_SCRATCH_START + L1_SCRATCH_LENGTH)) ||
-	    (!(bfin_read_EBIU_AMBCTL0() & B0RDYEN) &&
-	       addr >= ASYNC_BANK0_BASE && (addr + 2) <= (ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE)) ||
-	    (!(bfin_read_EBIU_AMBCTL0() & B1RDYEN) &&
-	       addr >= ASYNC_BANK1_BASE && (addr + 2) <= (ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE)) ||
-	    (!(bfin_read_EBIU_AMBCTL1() & B2RDYEN) &&
-	       addr >= ASYNC_BANK2_BASE && (addr + 2) <= (ASYNC_BANK2_BASE + ASYNC_BANK1_SIZE)) ||
-	    (!(bfin_read_EBIU_AMBCTL1() & B3RDYEN) &&
-	      addr >= ASYNC_BANK3_BASE && (addr + 2) <= (ASYNC_BANK3_BASE + ASYNC_BANK1_SIZE))) {
-		*val = *address;
-		return true;
+	switch (bfin_mem_access_type(addr, 2)) {
+		case BFIN_MEM_ACCESS_CORE:
+		case BFIN_MEM_ACCESS_CORE_ONLY:
+			*val = *address;
+			return true;
+		case BFIN_MEM_ACCESS_DMA:
+			dma_memcpy(val, address, 2);
+			return true;
+		case BFIN_MEM_ACCESS_ITEST:
+			isram_memcpy(val, address, 2);
+			return true;
+		default: /* invalid access */
+			return false;
 	}
-
-#if L1_CODE_LENGTH != 0
-	if (addr >= L1_CODE_START && (addr + 2) <= (L1_CODE_START + L1_CODE_LENGTH)) {
-		isram_memcpy(val, address, 2);
-		return true;
-	}
-#endif
-
-
-	return false;
 }
 
 /*
diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index 1382f038235..d9791106be9 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -119,13 +119,19 @@ static struct platform_device bfin_mac_device = {
 };
 
 #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
-static struct dsa_platform_data ksz8893m_switch_data = {
+static struct dsa_chip_data ksz8893m_switch_chip_data = {
 	.mii_bus = &bfin_mii_bus.dev,
+	.port_names = {
+		NULL,
+		"eth%d",
+		"eth%d",
+		"cpu",
+	},
+};
+static struct dsa_platform_data ksz8893m_switch_data = {
+	.nr_chips = 1,
 	.netdev = &bfin_mac_device.dev,
-	.port_names[0]	= NULL,
-	.port_names[1]	= "eth%d",
-	.port_names[2]	= "eth%d",
-	.port_names[3]	= "cpu",
+	.chip = &ksz8893m_switch_chip_data,
 };
 
 static struct platform_device ksz8893m_switch_device = {
diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h
index b69bd9af38d..426e064062a 100644
--- a/arch/blackfin/mach-bf518/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h
@@ -7,7 +7,7 @@
  */
 
 /* This file should be up to date with:
- *  - Revision B, 02/03/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
+ *  - Revision C, 06/12/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
  */
 
 /* We plan on not supporting 0.0 silicon, but 0.1 isn't out yet - sorry */
@@ -18,7 +18,7 @@
 #ifndef _MACH_ANOMALY_H_
 #define _MACH_ANOMALY_H_
 
-/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
 #define ANOMALY_05000074 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
@@ -45,29 +45,31 @@
 /* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
 #define ANOMALY_05000426 (1)
 /* Software System Reset Corrupts PLL_LOCKCNT Register */
-#define ANOMALY_05000430 (1)
+#define ANOMALY_05000430 (__SILICON_REVISION__ < 1)
 /* Incorrect Use of Stack in Lockbox Firmware During Authentication */
 #define ANOMALY_05000431 (1)
 /* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */
-#define ANOMALY_05000435 (1)
+#define ANOMALY_05000435 (__SILICON_REVISION__ < 1)
 /* PORTx_DRIVE and PORTx_HYSTERESIS Registers Read Back Incorrect Values */
-#define ANOMALY_05000438 (1)
+#define ANOMALY_05000438 (__SILICON_REVISION__ < 1)
 /* Preboot Cannot be Used to Alter the PLL_DIV Register */
-#define ANOMALY_05000439 (1)
+#define ANOMALY_05000439 (__SILICON_REVISION__ < 1)
 /* bfrom_SysControl() Cannot be Used to Write the PLL_DIV Register */
-#define ANOMALY_05000440 (1)
+#define ANOMALY_05000440 (__SILICON_REVISION__ < 1)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
 /* Incorrect L1 Instruction Bank B Memory Map Location */
-#define ANOMALY_05000444 (1)
+#define ANOMALY_05000444 (__SILICON_REVISION__ < 1)
 /* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
-#define ANOMALY_05000452 (1)
+#define ANOMALY_05000452 (__SILICON_REVISION__ < 1)
 /* PWM_TRIPB Signal Not Available on PG10 */
-#define ANOMALY_05000453 (1)
+#define ANOMALY_05000453 (__SILICON_REVISION__ < 1)
 /* PPI_FS3 is Driven One Half Cycle Later Than PPI Data */
-#define ANOMALY_05000455 (1)
-/* False Hardware Error when RETI points to invalid memory */
+#define ANOMALY_05000455 (__SILICON_REVISION__ < 1)
+/* False Hardware Error when RETI Points to Invalid Memory */
 #define ANOMALY_05000461 (1)
+/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
+#define ANOMALY_05000462 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
@@ -78,24 +80,30 @@
 #define ANOMALY_05000158 (0)
 #define ANOMALY_05000171 (0)
 #define ANOMALY_05000179 (0)
+#define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
 #define ANOMALY_05000198 (0)
+#define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
 #define ANOMALY_05000220 (0)
 #define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
 #define ANOMALY_05000231 (0)
 #define ANOMALY_05000233 (0)
+#define ANOMALY_05000234 (0)
 #define ANOMALY_05000242 (0)
 #define ANOMALY_05000244 (0)
 #define ANOMALY_05000248 (0)
 #define ANOMALY_05000250 (0)
+#define ANOMALY_05000257 (0)
 #define ANOMALY_05000261 (0)
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000274 (0)
 #define ANOMALY_05000278 (0)
+#define ANOMALY_05000281 (0)
+#define ANOMALY_05000283 (0)
 #define ANOMALY_05000285 (0)
 #define ANOMALY_05000287 (0)
 #define ANOMALY_05000301 (0)
@@ -103,10 +111,13 @@
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000312 (0)
+#define ANOMALY_05000315 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (0)
+#define ANOMALY_05000357 (0)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000371 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (0)
 #define ANOMALY_05000389 (0)
@@ -117,5 +128,7 @@
 #define ANOMALY_05000448 (0)
 #define ANOMALY_05000456 (0)
 #define ANOMALY_05000450 (0)
+#define ANOMALY_05000465 (0)
+#define ANOMALY_05000467 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf518/include/mach/blackfin.h b/arch/blackfin/mach-bf518/include/mach/blackfin.h
index 267bb7c8bfb..e8e14c2769e 100644
--- a/arch/blackfin/mach-bf518/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf518/include/mach/blackfin.h
@@ -33,7 +33,6 @@
 #define _MACH_BLACKFIN_H_
 
 #include "bf518.h"
-#include "mem_map.h"
 #include "defBF512.h"
 #include "anomaly.h"
 
diff --git a/arch/blackfin/mach-bf518/include/mach/mem_map.h b/arch/blackfin/mach-bf518/include/mach/mem_map.h
index 62bcc781bfa..3c6777cb353 100644
--- a/arch/blackfin/mach-bf518/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf518/include/mach/mem_map.h
@@ -1,38 +1,16 @@
 /*
- * file:         include/asm-blackfin/mach-bf518/mem_map.h
- * based on:	include/asm-blackfin/mach-bf527/mem_map.h
- * author:	Bryan Wu <cooloney@kernel.org>
+ * BF51x memory map
  *
- * created:
- * description:
- *	Memory MAP Common header file for blackfin BF518/6/4/2 of processors.
- * rev:
- *
- * modified:
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
  */
 
-#ifndef _MEM_MAP_518_H_
-#define _MEM_MAP_518_H_
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
 
-#define COREMMR_BASE           0xFFE00000	/* Core MMRs */
-#define SYSMMR_BASE            0xFFC00000	/* System MMRs */
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
 
 /* Async Memory Banks */
 #define ASYNC_BANK3_BASE	0x20300000	/* Async Bank 3 */
@@ -89,20 +67,4 @@
 #define BFIN_DSUPBANKS		0
 #endif				/*CONFIG_BFIN_DCACHE */
 
-/* Level 2 Memory - none */
-
-#define L2_START	0
-#define L2_LENGTH	0
-
-/* Scratch Pad Memory */
-
-#define L1_SCRATCH_START	0xFFB00000
-#define L1_SCRATCH_LENGTH	0x1000
-
-#define GET_PDA_SAFE(preg)		\
-	preg.l = _cpu_pda;		\
-	preg.h = _cpu_pda;
-
-#define GET_PDA(preg, dreg)	GET_PDA_SAFE(preg)
-
-#endif				/* _MEM_MAP_518_H_ */
+#endif
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 1eaf27ff722..f4867ce0c61 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -78,7 +78,6 @@ static struct resource bfin_isp1760_resources[] = {
 
 static struct isp1760_platform_data isp1760_priv = {
 	.is_isp1761 = 0,
-	.port1_disable = 0,
 	.bus_width_16 = 1,
 	.port1_otg = 0,
 	.analog_oc = 0,
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 9f9c0005dcf..b2f30f06b73 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -237,10 +237,10 @@ static struct flash_platform_data bfin_spi_flash_data = {
 	.name = "m25p80",
 	.parts = bfin_spi_flash_partitions,
 	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
-	.type = "m25p16",
+	.type = "sst25wf040",
 };
 
-/* SPI flash chip (m25p64) */
+/* SPI flash chip (sst25wf040) */
 static struct bfin5xx_spi_chip spi_flash_chip_info = {
 	.enable_dma = 0,         /* use dma transfer with this chip*/
 	.bits_per_word = 8,
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 3e5b7db6b06..799a1d1fa89 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -77,7 +77,6 @@ static struct resource bfin_isp1760_resources[] = {
 
 static struct isp1760_platform_data isp1760_priv = {
 	.is_isp1761 = 0,
-	.port1_disable = 0,
 	.bus_width_16 = 1,
 	.port1_otg = 0,
 	.analog_oc = 0,
diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h
index c84ddea9574..0d63f740616 100644
--- a/arch/blackfin/mach-bf527/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h
@@ -34,7 +34,7 @@
 #define _ANOMALY_BF527(rev527) (ANOMALY_BF527 && __SILICON_REVISION__ rev527)
 #define _ANOMALY_BF526_BF527(rev526, rev527) (_ANOMALY_BF526(rev526) || _ANOMALY_BF527(rev527))
 
-/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
 #define ANOMALY_05000074 (1)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
 #define ANOMALY_05000119 (1)	/* note: brokenness is noted in documentation, not anomaly sheet */
@@ -184,8 +184,12 @@
 #define ANOMALY_05000456 (1)
 /* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */
 #define ANOMALY_05000457 (1)
-/* False Hardware Error when RETI points to invalid memory */
+/* False Hardware Error when RETI Points to Invalid Memory */
 #define ANOMALY_05000461 (1)
+/* USB Rx DMA hang */
+#define ANOMALY_05000465 (1)
+/* Possible RX data corruption when control & data EP FIFOs are accessed via the core */
+#define ANOMALY_05000467 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
@@ -195,24 +199,30 @@
 #define ANOMALY_05000158 (0)
 #define ANOMALY_05000171 (0)
 #define ANOMALY_05000179 (0)
+#define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
 #define ANOMALY_05000198 (0)
+#define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
 #define ANOMALY_05000220 (0)
 #define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
 #define ANOMALY_05000231 (0)
 #define ANOMALY_05000233 (0)
+#define ANOMALY_05000234 (0)
 #define ANOMALY_05000242 (0)
 #define ANOMALY_05000244 (0)
 #define ANOMALY_05000248 (0)
 #define ANOMALY_05000250 (0)
+#define ANOMALY_05000257 (0)
 #define ANOMALY_05000261 (0)
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000274 (0)
 #define ANOMALY_05000278 (0)
+#define ANOMALY_05000281 (0)
+#define ANOMALY_05000283 (0)
 #define ANOMALY_05000285 (0)
 #define ANOMALY_05000287 (0)
 #define ANOMALY_05000301 (0)
@@ -220,6 +230,7 @@
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000312 (0)
+#define ANOMALY_05000315 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
diff --git a/arch/blackfin/mach-bf527/include/mach/blackfin.h b/arch/blackfin/mach-bf527/include/mach/blackfin.h
index 417abcd61f4..03665a8e16b 100644
--- a/arch/blackfin/mach-bf527/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf527/include/mach/blackfin.h
@@ -33,7 +33,6 @@
 #define _MACH_BLACKFIN_H_
 
 #include "bf527.h"
-#include "mem_map.h"
 #include "defBF522.h"
 #include "anomaly.h"
 
diff --git a/arch/blackfin/mach-bf527/include/mach/mem_map.h b/arch/blackfin/mach-bf527/include/mach/mem_map.h
index 019e0017ad8..d96e894afd2 100644
--- a/arch/blackfin/mach-bf527/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf527/include/mach/mem_map.h
@@ -1,38 +1,16 @@
 /*
- * file:         include/asm-blackfin/mach-bf527/mem_map.h
- * based on:	include/asm-blackfin/mach-bf537/mem_map.h
- * author:	Michael Hennerich (michael.hennerich@analog.com)
+ * BF52x memory map
  *
- * created:
- * description:
- *	Memory MAP Common header file for blackfin BF527/5/2 of processors.
- * rev:
- *
- * modified:
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
  */
 
-#ifndef _MEM_MAP_527_H_
-#define _MEM_MAP_527_H_
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
 
-#define COREMMR_BASE           0xFFE00000	/* Core MMRs */
-#define SYSMMR_BASE            0xFFC00000	/* System MMRs */
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
 
 /* Async Memory Banks */
 #define ASYNC_BANK3_BASE	0x20300000	/* Async Bank 3 */
@@ -89,20 +67,4 @@
 #define BFIN_DSUPBANKS	0
 #endif				/*CONFIG_BFIN_DCACHE */
 
-/* Level 2 Memory - none */
-
-#define L2_START	0
-#define L2_LENGTH	0
-
-/* Scratch Pad Memory */
-
-#define L1_SCRATCH_START	0xFFB00000
-#define L1_SCRATCH_LENGTH	0x1000
-
-#define GET_PDA_SAFE(preg)		\
-	preg.l = _cpu_pda;		\
-	preg.h = _cpu_pda;
-
-#define GET_PDA(preg, dreg)	GET_PDA_SAFE(preg)
-
-#endif				/* _MEM_MAP_527_H_ */
+#endif
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 89a5ec4ca04..4e3e511bf14 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -32,6 +32,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/plat-ram.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
@@ -86,6 +87,101 @@ static struct platform_device smc91x_device = {
 };
 #endif
 
+#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE)
+static const char *map_probes[] = {
+	"stm_flash",
+	NULL,
+};
+
+static struct platdata_mtd_ram stm_pri_data_a = {
+	.mapname    = "Flash A Primary",
+	.map_probes = map_probes,
+	.bankwidth  = 2,
+};
+
+static struct resource stm_pri_resource_a = {
+	.start = 0x20000000,
+	.end   = 0x200fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device stm_pri_device_a = {
+	.name          = "mtd-ram",
+	.id            = 0,
+	.dev = {
+		.platform_data = &stm_pri_data_a,
+	},
+	.num_resources = 1,
+	.resource      = &stm_pri_resource_a,
+};
+
+static struct platdata_mtd_ram stm_pri_data_b = {
+	.mapname    = "Flash B Primary",
+	.map_probes = map_probes,
+	.bankwidth  = 2,
+};
+
+static struct resource stm_pri_resource_b = {
+	.start = 0x20100000,
+	.end   = 0x201fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device stm_pri_device_b = {
+	.name          = "mtd-ram",
+	.id            = 4,
+	.dev = {
+		.platform_data = &stm_pri_data_b,
+	},
+	.num_resources = 1,
+	.resource      = &stm_pri_resource_b,
+};
+#endif
+
+#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
+static struct platdata_mtd_ram sram_data_a = {
+	.mapname   = "Flash A SRAM",
+	.bankwidth = 2,
+};
+
+static struct resource sram_resource_a = {
+	.start = 0x20240000,
+	.end   = 0x2024ffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device sram_device_a = {
+	.name          = "mtd-ram",
+	.id            = 8,
+	.dev = {
+		.platform_data = &sram_data_a,
+	},
+	.num_resources = 1,
+	.resource      = &sram_resource_a,
+};
+
+static struct platdata_mtd_ram sram_data_b = {
+	.mapname   = "Flash B SRAM",
+	.bankwidth = 2,
+};
+
+static struct resource sram_resource_b = {
+	.start = 0x202c0000,
+	.end   = 0x202cffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device sram_device_b = {
+	.name          = "mtd-ram",
+	.id            = 9,
+	.dev = {
+		.platform_data = &sram_data_b,
+	},
+	.num_resources = 1,
+	.resource      = &sram_resource_b,
+};
+#endif
+
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
@@ -357,6 +453,16 @@ static struct platform_device *ezkit_devices[] __initdata = {
 
 	&bfin_dpmc,
 
+#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE)
+	&stm_pri_device_a,
+	&stm_pri_device_b,
+#endif
+
+#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
+	&sram_device_a,
+	&sram_device_b,
+#endif
+
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 	&smc91x_device,
 #endif
diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h
index 31145b509e2..70a0ad69c61 100644
--- a/arch/blackfin/mach-bf533/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h
@@ -34,7 +34,7 @@
 # define ANOMALY_BF533 0
 #endif
 
-/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
 #define ANOMALY_05000074 (1)
 /* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */
 #define ANOMALY_05000099 (__SILICON_REVISION__ < 5)
@@ -46,7 +46,7 @@
 #define ANOMALY_05000122 (1)
 /* Instruction DMA Can Cause Data Cache Fills to Fail (Boot Implications) */
 #define ANOMALY_05000158 (__SILICON_REVISION__ < 5)
-/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */
+/* PPI Data Lengths between 8 and 16 Do Not Zero Out Upper Bits */
 #define ANOMALY_05000166 (1)
 /* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */
 #define ANOMALY_05000167 (1)
@@ -56,13 +56,13 @@
 #define ANOMALY_05000180 (1)
 /* Timer Pin Limitations for PPI TX Modes with External Frame Syncs */
 #define ANOMALY_05000183 (__SILICON_REVISION__ < 4)
-/* False Protection Exceptions */
+/* False Protection Exceptions when Speculative Fetch Is Cancelled */
 #define ANOMALY_05000189 (__SILICON_REVISION__ < 4)
 /* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */
 #define ANOMALY_05000193 (__SILICON_REVISION__ < 4)
 /* Restarting SPORT in Specific Modes May Cause Data Corruption */
 #define ANOMALY_05000194 (__SILICON_REVISION__ < 4)
-/* Failing MMR Accesses When Stalled by Preceding Memory Read */
+/* Failing MMR Accesses when Preceding Memory Read Stalls */
 #define ANOMALY_05000198 (__SILICON_REVISION__ < 5)
 /* Current DMA Address Shows Wrong Value During Carry Fix */
 #define ANOMALY_05000199 (__SILICON_REVISION__ < 4)
@@ -74,7 +74,7 @@
 #define ANOMALY_05000202 (__SILICON_REVISION__ < 5)
 /* Specific Sequence That Can Cause DMA Error or DMA Stopping */
 #define ANOMALY_05000203 (__SILICON_REVISION__ < 4)
-/* Incorrect data read with write-through cache and allocate cache lines on reads only mode */
+/* Incorrect Data Read with Writethrough "Allocate Cache Lines on Reads Only" Cache Mode */
 #define ANOMALY_05000204 (__SILICON_REVISION__ < 4 && ANOMALY_BF533)
 /* Recovery from "Brown-Out" Condition */
 #define ANOMALY_05000207 (__SILICON_REVISION__ < 4)
@@ -106,7 +106,7 @@
 #define ANOMALY_05000244 (__SILICON_REVISION__ < 5)
 /* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
-/* Data CPLBs Should Prevent Spurious Hardware Errors */
+/* Data CPLBs Should Prevent False Hardware Errors */
 #define ANOMALY_05000246 (__SILICON_REVISION__ < 5)
 /* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */
 #define ANOMALY_05000250 (__SILICON_REVISION__ == 4)
@@ -148,21 +148,21 @@
 #define ANOMALY_05000277 (__SILICON_REVISION__ < 6)
 /* Disabling Peripherals with DMA Running May Cause DMA System Instability */
 #define ANOMALY_05000278 (__SILICON_REVISION__ < 6)
-/* False Hardware Error Exception When ISR Context Is Not Restored */
+/* False Hardware Error Exception when ISR Context Is Not Restored */
 #define ANOMALY_05000281 (__SILICON_REVISION__ < 6)
 /* Memory DMA Corruption with 32-Bit Data and Traffic Control */
 #define ANOMALY_05000282 (__SILICON_REVISION__ < 6)
-/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
+/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */
 #define ANOMALY_05000283 (__SILICON_REVISION__ < 6)
 /* SPORTs May Receive Bad Data If FIFOs Fill Up */
 #define ANOMALY_05000288 (__SILICON_REVISION__ < 6)
 /* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
 #define ANOMALY_05000301 (__SILICON_REVISION__ < 6)
-/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
+/* SSYNCs after Writes to DMA MMR Registers May Not Be Handled Correctly */
 #define ANOMALY_05000302 (__SILICON_REVISION__ < 5)
 /* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
 #define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
-/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */
+/* ALT_TIMING Bit in PPI_CONTROL Register Is Not Functional */
 #define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
 /* SCKELOW Bit Does Not Maintain State Through Hibernate */
 #define ANOMALY_05000307 (1)	/* note: brokenness is noted in documentation, not anomaly sheet */
@@ -170,11 +170,11 @@
 #define ANOMALY_05000310 (1)
 /* Erroneous Flag (GPIO) Pin Operations under Specific Sequences */
 #define ANOMALY_05000311 (__SILICON_REVISION__ < 6)
-/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
 #define ANOMALY_05000312 (__SILICON_REVISION__ < 6)
 /* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
 #define ANOMALY_05000313 (__SILICON_REVISION__ < 6)
-/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
+/* Killed System MMR Write Completes Erroneously on Next System MMR Access */
 #define ANOMALY_05000315 (__SILICON_REVISION__ < 6)
 /* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */
 #define ANOMALY_05000319 ((ANOMALY_BF531 || ANOMALY_BF532) && __SILICON_REVISION__ < 6)
@@ -200,7 +200,7 @@
 #define ANOMALY_05000426 (1)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
-/* False Hardware Error when RETI points to invalid memory */
+/* False Hardware Error when RETI Points to Invalid Memory */
 #define ANOMALY_05000461 (1)
 
 /* These anomalies have been "phased" out of analog.com anomaly sheets and are
@@ -215,17 +215,17 @@
 #define ANOMALY_05000070 (__SILICON_REVISION__ < 2)
 /* Writing FIO_DIR can corrupt a programmable flag's data */
 #define ANOMALY_05000079 (__SILICON_REVISION__ < 2)
-/* Timer Auto-Baud Mode requires the UART clock to be enabled */
+/* Timer Auto-Baud Mode requires the UART clock to be enabled. */
 #define ANOMALY_05000086 (__SILICON_REVISION__ < 2)
 /* Internal Clocking Modes on SPORT0 not supported */
 #define ANOMALY_05000088 (__SILICON_REVISION__ < 2)
 /* Internal voltage regulator does not wake up from an RTC wakeup */
 #define ANOMALY_05000092 (__SILICON_REVISION__ < 2)
-/* The IFLUSH instruction must be preceded by a CSYNC instruction */
+/* The IFLUSH Instruction Must Be Preceded by a CSYNC Instruction */
 #define ANOMALY_05000093 (__SILICON_REVISION__ < 2)
-/* Vectoring to an instruction that is presently being filled into the instruction cache may cause erroneous behavior */
+/* Vectoring to instruction that is being filled into the i-cache may cause erroneous behavior */
 #define ANOMALY_05000095 (__SILICON_REVISION__ < 2)
-/* PREFETCH, FLUSH, and FLUSHINV must be followed by a CSYNC */
+/* PREFETCH, FLUSH, and FLUSHINV Instructions Must Be Followed by a CSYNC Instruction */
 #define ANOMALY_05000096 (__SILICON_REVISION__ < 2)
 /* Performance Monitor 0 and 1 are swapped when monitoring memory events */
 #define ANOMALY_05000097 (__SILICON_REVISION__ < 2)
@@ -235,45 +235,45 @@
 #define ANOMALY_05000100 (__SILICON_REVISION__ < 2)
 /* Reading X_MODIFY or Y_MODIFY while DMA channel is active */
 #define ANOMALY_05000101 (__SILICON_REVISION__ < 2)
-/* Descriptor-based MemDMA may lock up with 32-bit transfers or if transfers span 64KB buffers */
+/* Descriptor MemDMA may lock up with 32-bit transfers or if transfers span 64KB buffers */
 #define ANOMALY_05000102 (__SILICON_REVISION__ < 2)
-/* Incorrect value written to the cycle counters */
+/* Incorrect Value Written to the Cycle Counters */
 #define ANOMALY_05000103 (__SILICON_REVISION__ < 2)
-/* Stores to L1 Data memory incorrect when a specific sequence is followed */
+/* Stores to L1 Data Memory Incorrect when a Specific Sequence Is Followed */
 #define ANOMALY_05000104 (__SILICON_REVISION__ < 2)
 /* Programmable Flag (PF3) functionality not supported in all PPI modes */
 #define ANOMALY_05000106 (__SILICON_REVISION__ < 2)
 /* Data store can be lost when targeting a cache line fill */
 #define ANOMALY_05000107 (__SILICON_REVISION__ < 2)
-/* Reserved bits in SYSCFG register not set at power on */
+/* Reserved Bits in SYSCFG Register Not Set at Power-On */
 #define ANOMALY_05000109 (__SILICON_REVISION__ < 3)
 /* Infinite Core Stall */
 #define ANOMALY_05000114 (__SILICON_REVISION__ < 2)
-/* PPI_FSx may glitch when generated by the on chip Timers */
+/* PPI_FSx may glitch when generated by the on chip Timers. */
 #define ANOMALY_05000115 (__SILICON_REVISION__ < 2)
-/* Trace Buffers may record discontinuities into emulation mode and/or exception, NMI, reset handlers */
+/* Trace Buffers May Contain Errors in Emulation Mode and/or Exception, NMI, Reset Handlers */
 #define ANOMALY_05000116 (__SILICON_REVISION__ < 3)
 /* DTEST registers allow access to Data Cache when DTEST_COMMAND< 14 >= 0 */
 #define ANOMALY_05000117 (__SILICON_REVISION__ < 2)
 /* Booting from an 8-bit or 24-bit Addressable SPI device is not supported */
 #define ANOMALY_05000118 (__SILICON_REVISION__ < 2)
-/* DTEST_COMMAND initiated memory access may be incorrect if data cache or DMA is active */
+/* DTEST_COMMAND Initiated Memory Access May Be Incorrect If Data Cache or DMA Is Active */
 #define ANOMALY_05000123 (__SILICON_REVISION__ < 3)
 /* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */
 #define ANOMALY_05000124 (__SILICON_REVISION__ < 3)
-/* Erroneous exception when enabling cache */
+/* Erroneous Exception when Enabling Cache */
 #define ANOMALY_05000125 (__SILICON_REVISION__ < 3)
 /* SPI clock polarity and phase bits incorrect during booting */
 #define ANOMALY_05000126 (__SILICON_REVISION__ < 3)
-/* DMEM_CONTROL is not set on Reset */
+/* DMEM_CONTROL<12> Is Not Set on Reset */
 #define ANOMALY_05000137 (__SILICON_REVISION__ < 3)
 /* SPI boot will not complete if there is a zero fill block in the loader file */
 #define ANOMALY_05000138 (__SILICON_REVISION__ == 2)
-/* Timerx_Config must be set for using the PPI in GP output mode with internal Frame Syncs */
+/* TIMERx_CONFIG[5] must be set for PPI in GP output mode with internal Frame Syncs */
 #define ANOMALY_05000139 (__SILICON_REVISION__ < 2)
 /* Allowing the SPORT RX FIFO to fill will cause an overflow */
 #define ANOMALY_05000140 (__SILICON_REVISION__ < 3)
-/* An Infinite Stall occurs with a particular sequence of consecutive dual dag events */
+/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */
 #define ANOMALY_05000141 (__SILICON_REVISION__ < 3)
 /* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */
 #define ANOMALY_05000142 (__SILICON_REVISION__ < 3)
@@ -287,7 +287,7 @@
 #define ANOMALY_05000146 (__SILICON_REVISION__ < 3)
 /* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */
 #define ANOMALY_05000147 (__SILICON_REVISION__ < 3)
-/* When booting from a 16-bit asynchronous memory device, the upper 8-bits of each word must be 0x00 */
+/* When booting from 16-bit asynchronous memory, the upper 8 bits of each word must be 0x00 */
 #define ANOMALY_05000148 (__SILICON_REVISION__ < 3)
 /* Frame Delay in SPORT Multichannel Mode */
 #define ANOMALY_05000153 (__SILICON_REVISION__ < 3)
@@ -295,13 +295,13 @@
 #define ANOMALY_05000154 (__SILICON_REVISION__ < 3)
 /* Timer1 can not be used for PWMOUT mode when a certain PPI mode is in use */
 #define ANOMALY_05000155 (__SILICON_REVISION__ < 3)
-/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */
+/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */
 #define ANOMALY_05000157 (__SILICON_REVISION__ < 3)
-/* SPORT transmit data is not gated by external frame sync in certain conditions */
+/* SPORT Transmit Data Is Not Gated by External Frame Sync in Certain Conditions */
 #define ANOMALY_05000163 (__SILICON_REVISION__ < 3)
-/* SDRAM auto-refresh and subsequent Power Ups */
+/* Undefined Behavior when Power-Up Sequence Is Issued to SDRAM during Auto-Refresh */
 #define ANOMALY_05000168 (__SILICON_REVISION__ < 3)
-/* DATA CPLB page miss can result in lost write-through cache data writes */
+/* DATA CPLB Page Miss Can Result in Lost Write-Through Data Cache Writes */
 #define ANOMALY_05000169 (__SILICON_REVISION__ < 3)
 /* DMA vs Core accesses to external memory */
 #define ANOMALY_05000173 (__SILICON_REVISION__ < 3)
@@ -309,15 +309,15 @@
 #define ANOMALY_05000174 (__SILICON_REVISION__ < 3)
 /* Overlapping Sequencer and Memory Stalls */
 #define ANOMALY_05000175 (__SILICON_REVISION__ < 3)
-/* Multiplication of (-1) by (-1) followed by an accumulator saturation */
+/* Overflow Bit Asserted when Multiplication of -1 by -1 Followed by Accumulator Saturation */
 #define ANOMALY_05000176 (__SILICON_REVISION__ < 3)
-/* Disabling the PPI resets the PPI configuration registers */
+/* Disabling the PPI Resets the PPI Configuration Registers */
 #define ANOMALY_05000181 (__SILICON_REVISION__ < 3)
-/* PPI TX Mode with 2 External Frame Syncs */
+/* Early PPI Transmit when FS1 Asserts before FS2 in TX Mode with 2 External Frame Syncs */
 #define ANOMALY_05000185 (__SILICON_REVISION__ < 3)
 /* PPI does not invert the Driving PPICLK edge in Transmit Modes */
 #define ANOMALY_05000191 (__SILICON_REVISION__ < 3)
-/* In PPI Transmit Modes with External Frame Syncs POLC */
+/* In PPI Transmit Modes with External Frame Syncs POLC bit must be set to 1 */
 #define ANOMALY_05000192 (__SILICON_REVISION__ < 3)
 /* Internal Voltage Regulator may not start up */
 #define ANOMALY_05000206 (__SILICON_REVISION__ < 3)
@@ -326,6 +326,7 @@
 #define ANOMALY_05000120 (0)
 #define ANOMALY_05000149 (0)
 #define ANOMALY_05000171 (0)
+#define ANOMALY_05000182 (0)
 #define ANOMALY_05000220 (0)
 #define ANOMALY_05000248 (0)
 #define ANOMALY_05000266 (0)
@@ -345,5 +346,7 @@
 #define ANOMALY_05000448 (0)
 #define ANOMALY_05000456 (0)
 #define ANOMALY_05000450 (0)
+#define ANOMALY_05000465 (0)
+#define ANOMALY_05000467 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf533/include/mach/blackfin.h b/arch/blackfin/mach-bf533/include/mach/blackfin.h
index 045184f81a2..39aa175f19f 100644
--- a/arch/blackfin/mach-bf533/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf533/include/mach/blackfin.h
@@ -34,7 +34,6 @@
 #define BF533_FAMILY
 
 #include "bf533.h"
-#include "mem_map.h"
 #include "defBF532.h"
 #include "anomaly.h"
 
diff --git a/arch/blackfin/mach-bf533/include/mach/mem_map.h b/arch/blackfin/mach-bf533/include/mach/mem_map.h
index fc33b7cb993..197af1a398a 100644
--- a/arch/blackfin/mach-bf533/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf533/include/mach/mem_map.h
@@ -1,38 +1,16 @@
 /*
- * File:         include/asm-blackfin/mach-bf533/mem_map.h
- * Based on:
- * Author:
+ * BF533 memory map
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
  */
 
-#ifndef _MEM_MAP_533_H_
-#define _MEM_MAP_533_H_
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
 
-#define COREMMR_BASE           0xFFE00000	 /* Core MMRs */
-#define SYSMMR_BASE            0xFFC00000	 /* System MMRs */
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
 
 /* Async Memory Banks */
 #define ASYNC_BANK3_BASE	0x20300000	 /* Async Bank 3 */
@@ -158,20 +136,4 @@
 
 #endif
 
-/* Level 2 Memory - none */
-
-#define L2_START	0
-#define L2_LENGTH	0
-
-/* Scratch Pad Memory */
-
-#define L1_SCRATCH_START	0xFFB00000
-#define L1_SCRATCH_LENGTH	0x1000
-
-#define GET_PDA_SAFE(preg)		\
-	preg.l = _cpu_pda;		\
-	preg.h = _cpu_pda;
-
-#define GET_PDA(preg, dreg)	GET_PDA_SAFE(preg)
-
-#endif				/* _MEM_MAP_533_H_ */
+#endif
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index ff7228caa7d..c1f76dd2c4e 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -79,7 +79,6 @@ static struct resource bfin_isp1760_resources[] = {
 
 static struct isp1760_platform_data isp1760_priv = {
 	.is_isp1761 = 0,
-	.port1_disable = 0,
 	.bus_width_16 = 1,
 	.port1_otg = 0,
 	.analog_oc = 0,
diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h
index fc966342546..57c128cc3b6 100644
--- a/arch/blackfin/mach-bf537/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h
@@ -34,13 +34,13 @@
 # define ANOMALY_BF537 0
 #endif
 
-/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
 #define ANOMALY_05000074 (1)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
 #define ANOMALY_05000119 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
-/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */
+/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */
 #define ANOMALY_05000157 (__SILICON_REVISION__ < 2)
 /* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */
 #define ANOMALY_05000180 (1)
@@ -50,11 +50,11 @@
 #define ANOMALY_05000244 (__SILICON_REVISION__ < 3)
 /* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
-/* CLKIN Buffer Output Enable Reset Behavior Is Changed */
+/* Buffered CLKIN Output Is Disabled by Default */
 #define ANOMALY_05000247 (1)
 /* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */
 #define ANOMALY_05000250 (__SILICON_REVISION__ < 3)
-/* EMAC Tx DMA error after an early frame abort */
+/* EMAC TX DMA Error After an Early Frame Abort */
 #define ANOMALY_05000252 (__SILICON_REVISION__ < 3)
 /* Maximum External Clock Speed for Timers */
 #define ANOMALY_05000253 (__SILICON_REVISION__ < 3)
@@ -62,7 +62,7 @@
 #define ANOMALY_05000254 (__SILICON_REVISION__ > 2)
 /* Entering Hibernate State with RTC Seconds Interrupt Not Functional */
 #define ANOMALY_05000255 (__SILICON_REVISION__ < 3)
-/* EMAC MDIO input latched on wrong MDC edge */
+/* EMAC MDIO Input Latched on Wrong MDC Edge */
 #define ANOMALY_05000256 (__SILICON_REVISION__ < 3)
 /* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */
 #define ANOMALY_05000257 (__SILICON_REVISION__ < 3)
@@ -80,7 +80,7 @@
 #define ANOMALY_05000264 (__SILICON_REVISION__ < 3)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
-/* Memory DMA error when peripheral DMA is running with non-zero DEB_TRAFFIC_PERIOD */
+/* Memory DMA Error when Peripheral DMA Is Running with Non-Zero DEB_TRAFFIC_PERIOD */
 #define ANOMALY_05000268 (__SILICON_REVISION__ < 3)
 /* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
 #define ANOMALY_05000270 (__SILICON_REVISION__ < 3)
@@ -92,15 +92,15 @@
 #define ANOMALY_05000277 (__SILICON_REVISION__ < 3)
 /* Disabling Peripherals with DMA Running May Cause DMA System Instability */
 #define ANOMALY_05000278 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ < 3) || (ANOMALY_BF534 && __SILICON_REVISION__ < 2))
-/* SPI Master boot mode does not work well with Atmel Data flash devices */
+/* SPI Master Boot Mode Does Not Work Well with Atmel Data Flash Devices */
 #define ANOMALY_05000280 (1)
-/* False Hardware Error Exception When ISR Context Is Not Restored */
+/* False Hardware Error Exception when ISR Context Is Not Restored */
 #define ANOMALY_05000281 (__SILICON_REVISION__ < 3)
 /* Memory DMA Corruption with 32-Bit Data and Traffic Control */
 #define ANOMALY_05000282 (__SILICON_REVISION__ < 3)
-/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
+/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */
 #define ANOMALY_05000283 (__SILICON_REVISION__ < 3)
-/* New Feature: EMAC TX DMA Word Alignment (Not Available On Older Silicon) */
+/* TXDWA Bit in EMAC_SYSCTL Register Is Not Functional */
 #define ANOMALY_05000285 (__SILICON_REVISION__ < 3)
 /* SPORTs May Receive Bad Data If FIFOs Fill Up */
 #define ANOMALY_05000288 (__SILICON_REVISION__ < 3)
@@ -112,25 +112,25 @@
 #define ANOMALY_05000305 (__SILICON_REVISION__ < 3)
 /* SCKELOW Bit Does Not Maintain State Through Hibernate */
 #define ANOMALY_05000307 (__SILICON_REVISION__ < 3)
-/* Writing UART_THR while UART clock is disabled sends erroneous start bit */
+/* Writing UART_THR While UART Clock Is Disabled Sends Erroneous Start Bit */
 #define ANOMALY_05000309 (__SILICON_REVISION__ < 3)
 /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
 #define ANOMALY_05000310 (1)
-/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
 #define ANOMALY_05000312 (1)
 /* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
 #define ANOMALY_05000313 (1)
-/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
+/* Killed System MMR Write Completes Erroneously on Next System MMR Access */
 #define ANOMALY_05000315 (__SILICON_REVISION__ < 3)
-/* EMAC RMII mode: collisions occur in Full Duplex mode */
+/* EMAC RMII Mode: Collisions Occur in Full Duplex Mode */
 #define ANOMALY_05000316 (__SILICON_REVISION__ < 3)
-/* EMAC RMII mode: TX frames in half duplex fail with status No Carrier */
+/* EMAC RMII Mode: TX Frames in Half Duplex Fail with Status "No Carrier" */
 #define ANOMALY_05000321 (__SILICON_REVISION__ < 3)
-/* EMAC RMII mode at 10-Base-T speed: RX frames not received properly */
+/* EMAC RMII Mode at 10-Base-T Speed: RX Frames Not Received Properly */
 #define ANOMALY_05000322 (1)
 /* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
 #define ANOMALY_05000341 (__SILICON_REVISION__ >= 3)
-/* New Feature: UART Remains Enabled after UART Boot */
+/* UART Gets Disabled after UART Boot */
 #define ANOMALY_05000350 (__SILICON_REVISION__ >= 3)
 /* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
 #define ANOMALY_05000355 (1)
@@ -154,7 +154,7 @@
 #define ANOMALY_05000426 (1)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
-/* False Hardware Error when RETI points to invalid memory */
+/* False Hardware Error when RETI Points to Invalid Memory */
 #define ANOMALY_05000461 (1)
 
 /* Anomalies that don't exist on this proc */
@@ -165,14 +165,17 @@
 #define ANOMALY_05000158 (0)
 #define ANOMALY_05000171 (0)
 #define ANOMALY_05000179 (0)
+#define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
 #define ANOMALY_05000198 (0)
+#define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
 #define ANOMALY_05000220 (0)
 #define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
 #define ANOMALY_05000231 (0)
 #define ANOMALY_05000233 (0)
+#define ANOMALY_05000234 (0)
 #define ANOMALY_05000242 (0)
 #define ANOMALY_05000248 (0)
 #define ANOMALY_05000266 (0)
@@ -195,5 +198,7 @@
 #define ANOMALY_05000448 (0)
 #define ANOMALY_05000456 (0)
 #define ANOMALY_05000450 (0)
+#define ANOMALY_05000465 (0)
+#define ANOMALY_05000467 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf537/include/mach/blackfin.h b/arch/blackfin/mach-bf537/include/mach/blackfin.h
index 7d6069c886f..f5e5015ad83 100644
--- a/arch/blackfin/mach-bf537/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf537/include/mach/blackfin.h
@@ -35,7 +35,6 @@
 #define BF537_FAMILY
 
 #include "bf537.h"
-#include "mem_map.h"
 #include "defBF534.h"
 #include "anomaly.h"
 
diff --git a/arch/blackfin/mach-bf537/include/mach/mem_map.h b/arch/blackfin/mach-bf537/include/mach/mem_map.h
index f9010c4b4bf..942f08de306 100644
--- a/arch/blackfin/mach-bf537/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf537/include/mach/mem_map.h
@@ -1,38 +1,16 @@
 /*
- * file:         include/asm-blackfin/mach-bf537/mem_map.h
- * based on:
- * author:
+ * BF537 memory map
  *
- * created:
- * description:
- *	Memory MAP Common header file for blackfin BF537/6/4 of processors.
- * rev:
- *
- * modified:
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
  */
 
-#ifndef _MEM_MAP_537_H_
-#define _MEM_MAP_537_H_
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
 
-#define COREMMR_BASE           0xFFE00000	 /* Core MMRs */
-#define SYSMMR_BASE            0xFFC00000	 /* System MMRs */
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
 
 /* Async Memory Banks */
 #define ASYNC_BANK3_BASE	0x20300000	 /* Async Bank 3 */
@@ -166,20 +144,4 @@
 
 #endif
 
-/* Level 2 Memory - none */
-
-#define L2_START	0
-#define L2_LENGTH	0
-
-/* Scratch Pad Memory */
-
-#define L1_SCRATCH_START	0xFFB00000
-#define L1_SCRATCH_LENGTH	0x1000
-
-#define GET_PDA_SAFE(preg)		\
-	preg.l = _cpu_pda;		\
-	preg.h = _cpu_pda;
-
-#define GET_PDA(preg, dreg)	GET_PDA_SAFE(preg)
-
-#endif				/* _MEM_MAP_537_H_ */
+#endif
diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h
index 175ca9ef723..c97acdf85cd 100644
--- a/arch/blackfin/mach-bf538/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h
@@ -30,13 +30,13 @@
 # define ANOMALY_BF539 0
 #endif
 
-/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
 #define ANOMALY_05000074 (1)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
 #define ANOMALY_05000119 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
-/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */
+/* PPI Data Lengths between 8 and 16 Do Not Zero Out Upper Bits */
 #define ANOMALY_05000166 (1)
 /* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */
 #define ANOMALY_05000179 (1)
@@ -70,11 +70,11 @@
 #define ANOMALY_05000277 (__SILICON_REVISION__ < 4)
 /* Disabling Peripherals with DMA Running May Cause DMA System Instability */
 #define ANOMALY_05000278 (__SILICON_REVISION__ < 4)
-/* False Hardware Error Exception When ISR Context Is Not Restored */
+/* False Hardware Error Exception when ISR Context Is Not Restored */
 #define ANOMALY_05000281 (__SILICON_REVISION__ < 4)
 /* Memory DMA Corruption with 32-Bit Data and Traffic Control */
 #define ANOMALY_05000282 (__SILICON_REVISION__ < 4)
-/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
+/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */
 #define ANOMALY_05000283 (__SILICON_REVISION__ < 4)
 /* SPORTs May Receive Bad Data If FIFOs Fill Up */
 #define ANOMALY_05000288 (__SILICON_REVISION__ < 4)
@@ -92,11 +92,11 @@
 #define ANOMALY_05000307 (__SILICON_REVISION__ < 4)
 /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
 #define ANOMALY_05000310 (1)
-/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
 #define ANOMALY_05000312 (__SILICON_REVISION__ < 5)
 /* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
 #define ANOMALY_05000313 (__SILICON_REVISION__ < 4)
-/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
+/* Killed System MMR Write Completes Erroneously on Next System MMR Access */
 #define ANOMALY_05000315 (__SILICON_REVISION__ < 4)
 /* PFx Glitch on Write to FIO_FLAG_D or FIO_FLAG_T */
 #define ANOMALY_05000318 (ANOMALY_BF539 && __SILICON_REVISION__ < 4)
@@ -110,7 +110,7 @@
 #define ANOMALY_05000371 (__SILICON_REVISION__ < 5)
 /* Entering Hibernate State with Peripheral Wakeups Enabled Draws Excess Current */
 #define ANOMALY_05000374 (__SILICON_REVISION__ == 4)
-/* New Feature: Open-Drain GPIO Outputs on PC1 and PC4 (Not Available on Older Silicon) */
+/* GPIO Pins PC1 and PC4 Can Function as Normal Outputs */
 #define ANOMALY_05000375 (__SILICON_REVISION__ < 4)
 /* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
 #define ANOMALY_05000402 (__SILICON_REVISION__ < 4)
@@ -126,26 +126,32 @@
 #define ANOMALY_05000436 (__SILICON_REVISION__ > 3)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
-/* False Hardware Error when RETI points to invalid memory */
+/* False Hardware Error when RETI Points to Invalid Memory */
 #define ANOMALY_05000461 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
 #define ANOMALY_05000120 (0)
+#define ANOMALY_05000125 (0)
 #define ANOMALY_05000149 (0)
 #define ANOMALY_05000158 (0)
 #define ANOMALY_05000171 (0)
+#define ANOMALY_05000182 (0)
 #define ANOMALY_05000198 (0)
+#define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
 #define ANOMALY_05000220 (0)
 #define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
 #define ANOMALY_05000231 (0)
+#define ANOMALY_05000234 (0)
 #define ANOMALY_05000242 (0)
 #define ANOMALY_05000248 (0)
 #define ANOMALY_05000250 (0)
 #define ANOMALY_05000254 (0)
+#define ANOMALY_05000257 (0)
 #define ANOMALY_05000263 (0)
+#define ANOMALY_05000266 (0)
 #define ANOMALY_05000274 (0)
 #define ANOMALY_05000287 (0)
 #define ANOMALY_05000305 (0)
@@ -166,5 +172,7 @@
 #define ANOMALY_05000448 (0)
 #define ANOMALY_05000456 (0)
 #define ANOMALY_05000450 (0)
+#define ANOMALY_05000465 (0)
+#define ANOMALY_05000467 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf538/include/mach/blackfin.h b/arch/blackfin/mach-bf538/include/mach/blackfin.h
index 6f628353dde..9496196ac16 100644
--- a/arch/blackfin/mach-bf538/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf538/include/mach/blackfin.h
@@ -35,7 +35,6 @@
 #define BF538_FAMILY
 
 #include "bf538.h"
-#include "mem_map.h"
 #include "defBF539.h"
 #include "anomaly.h"
 
diff --git a/arch/blackfin/mach-bf538/include/mach/mem_map.h b/arch/blackfin/mach-bf538/include/mach/mem_map.h
index 76811966690..aff00f453e9 100644
--- a/arch/blackfin/mach-bf538/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf538/include/mach/mem_map.h
@@ -1,38 +1,16 @@
 /*
- * File:         include/asm-blackfin/mach-bf538/mem_map.h
- * Based on:
- * Author:
+ * BF538 memory map
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
  */
 
-#ifndef _MEM_MAP_538_H_
-#define _MEM_MAP_538_H_
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
 
-#define COREMMR_BASE           0xFFE00000	 /* Core MMRs */
-#define SYSMMR_BASE            0xFFC00000	 /* System MMRs */
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
 
 /* Async Memory Banks */
 #define ASYNC_BANK3_BASE	0x20300000	 /* Async Bank 3 */
@@ -93,21 +71,4 @@
 #define BFIN_DSUPBANKS	0
 #endif /*CONFIG_BFIN_DCACHE*/
 
-
-/* Level 2 Memory - none */
-
-#define L2_START	0
-#define L2_LENGTH	0
-
-/* Scratch Pad Memory */
-
-#define L1_SCRATCH_START	0xFFB00000
-#define L1_SCRATCH_LENGTH	0x1000
-
-#define GET_PDA_SAFE(preg)		\
-	preg.l = _cpu_pda;		\
-	preg.h = _cpu_pda;
-
-#define GET_PDA(preg, dreg)	GET_PDA_SAFE(preg)
-
-#endif				/* _MEM_MAP_538_H_ */
+#endif
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 805a57b5e65..81f5b95cc36 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -76,7 +76,6 @@ static struct resource bfin_isp1760_resources[] = {
 
 static struct isp1760_platform_data isp1760_priv = {
 	.is_isp1761 = 0,
-	.port1_disable = 0,
 	.bus_width_16 = 1,
 	.port1_otg = 0,
 	.analog_oc = 0,
diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h
index c510ae688e2..18a4cd24f67 100644
--- a/arch/blackfin/mach-bf548/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h
@@ -18,7 +18,7 @@
 # error will not work on BF548 silicon version 0.0, or 0.1
 #endif
 
-/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
 #define ANOMALY_05000074 (1)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
 #define ANOMALY_05000119 (1)
@@ -30,17 +30,17 @@
 #define ANOMALY_05000265 (1)
 /* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
 #define ANOMALY_05000272 (1)
-/* False Hardware Error Exception When ISR Context Is Not Restored */
+/* False Hardware Error Exception when ISR Context Is Not Restored */
 #define ANOMALY_05000281 (__SILICON_REVISION__ < 1)
 /* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
 #define ANOMALY_05000304 (__SILICON_REVISION__ < 1)
 /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
 #define ANOMALY_05000310 (1)
-/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
 #define ANOMALY_05000312 (__SILICON_REVISION__ < 1)
 /* TWI Slave Boot Mode Is Not Functional */
 #define ANOMALY_05000324 (__SILICON_REVISION__ < 1)
-/* External FIFO Boot Mode Is Not Functional */
+/* FIFO Boot Mode Not Functional */
 #define ANOMALY_05000325 (__SILICON_REVISION__ < 2)
 /* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */
 #define ANOMALY_05000327 (__SILICON_REVISION__ < 1)
@@ -178,8 +178,12 @@
 #define ANOMALY_05000450 (1)
 /* USB Receive Interrupt Is Not Generated in DMA Mode 1 */
 #define ANOMALY_05000456 (__SILICON_REVISION__ < 3)
-/* False Hardware Error when RETI points to invalid memory */
+/* False Hardware Error when RETI Points to Invalid Memory */
 #define ANOMALY_05000461 (1)
+/* USB Rx DMA hang */
+#define ANOMALY_05000465 (1)
+/* Possible RX data corruption when control & data EP FIFOs are accessed via the core */
+#define ANOMALY_05000467 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
@@ -189,30 +193,36 @@
 #define ANOMALY_05000158 (0)
 #define ANOMALY_05000171 (0)
 #define ANOMALY_05000179 (0)
+#define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
 #define ANOMALY_05000198 (0)
+#define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
 #define ANOMALY_05000220 (0)
 #define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
 #define ANOMALY_05000231 (0)
 #define ANOMALY_05000233 (0)
+#define ANOMALY_05000234 (0)
 #define ANOMALY_05000242 (0)
 #define ANOMALY_05000244 (0)
 #define ANOMALY_05000248 (0)
 #define ANOMALY_05000250 (0)
 #define ANOMALY_05000254 (0)
+#define ANOMALY_05000257 (0)
 #define ANOMALY_05000261 (0)
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000274 (0)
 #define ANOMALY_05000278 (0)
+#define ANOMALY_05000283 (0)
 #define ANOMALY_05000287 (0)
 #define ANOMALY_05000301 (0)
 #define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
+#define ANOMALY_05000315 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
diff --git a/arch/blackfin/mach-bf548/include/mach/blackfin.h b/arch/blackfin/mach-bf548/include/mach/blackfin.h
index cf6c1500222..6b97396d817 100644
--- a/arch/blackfin/mach-bf548/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf548/include/mach/blackfin.h
@@ -33,7 +33,6 @@
 #define _MACH_BLACKFIN_H_
 
 #include "bf548.h"
-#include "mem_map.h"
 #include "anomaly.h"
 
 #ifdef CONFIG_BF542
diff --git a/arch/blackfin/mach-bf548/include/mach/mem_map.h b/arch/blackfin/mach-bf548/include/mach/mem_map.h
index 70b9c119402..caac2dfb41e 100644
--- a/arch/blackfin/mach-bf548/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf548/include/mach/mem_map.h
@@ -1,38 +1,16 @@
 /*
- * file:         include/asm-blackfin/mach-bf548/mem_map.h
- * based on:
- * author:
+ * BF548 memory map
  *
- * created:
- * description:
- *	Memory MAP Common header file for blackfin BF537/6/4 of processors.
- * rev:
- *
- * modified:
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
  */
 
-#ifndef _MEM_MAP_548_H_
-#define _MEM_MAP_548_H_
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
 
-#define COREMMR_BASE           0xFFE00000	 /* Core MMRs */
-#define SYSMMR_BASE            0xFFC00000	 /* System MMRs */
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
 
 /* Async Memory Banks */
 #define ASYNC_BANK3_BASE	0x2C000000	 /* Async Bank 3 */
@@ -103,15 +81,4 @@
 # define L2_LENGTH          0x20000
 #endif
 
-/* Scratch Pad Memory */
-
-#define L1_SCRATCH_START	0xFFB00000
-#define L1_SCRATCH_LENGTH	0x1000
-
-#define GET_PDA_SAFE(preg)		\
-	preg.l = _cpu_pda;		\
-	preg.h = _cpu_pda;
-
-#define GET_PDA(preg, dreg)	GET_PDA_SAFE(preg)
-
-#endif/* _MEM_MAP_548_H_ */
+#endif
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index b5ef7ff7b7b..4df904f9e90 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -62,7 +62,6 @@ static struct resource bfin_isp1760_resources[] = {
 
 static struct isp1760_platform_data isp1760_priv = {
 	.is_isp1761 = 0,
-	.port1_disable = 0,
 	.bus_width_16 = 1,
 	.port1_otg = 0,
 	.analog_oc = 0,
diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h
index dccd396cd93..94b8e277f09 100644
--- a/arch/blackfin/mach-bf561/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h
@@ -18,19 +18,19 @@
 # error will not work on BF561 silicon version 0.0, 0.1, 0.2, or 0.4
 #endif
 
-/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
 #define ANOMALY_05000074 (1)
 /* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */
 #define ANOMALY_05000099 (__SILICON_REVISION__ < 5)
-/* Trace Buffers may record discontinuities into emulation mode and/or exception, NMI, reset handlers */
+/* Trace Buffers May Contain Errors in Emulation Mode and/or Exception, NMI, Reset Handlers */
 #define ANOMALY_05000116 (__SILICON_REVISION__ < 3)
-/* Testset instructions restricted to 32-bit aligned memory locations */
+/* TESTSET Instructions Restricted to 32-Bit Aligned Memory Locations */
 #define ANOMALY_05000120 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
-/* Erroneous exception when enabling cache */
+/* Erroneous Exception when Enabling Cache */
 #define ANOMALY_05000125 (__SILICON_REVISION__ < 3)
-/* Signbits instruction not functional under certain conditions */
+/* SIGNBITS Instruction Not Functional under Certain Conditions */
 #define ANOMALY_05000127 (1)
 /* Two bits in the Watchpoint Status Register (WPSTAT) are swapped */
 #define ANOMALY_05000134 (__SILICON_REVISION__ < 3)
@@ -40,7 +40,7 @@
 #define ANOMALY_05000136 (__SILICON_REVISION__ < 3)
 /* Allowing the SPORT RX FIFO to fill will cause an overflow */
 #define ANOMALY_05000140 (__SILICON_REVISION__ < 3)
-/* An Infinite Stall occurs with a particular sequence of consecutive dual dag events */
+/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */
 #define ANOMALY_05000141 (__SILICON_REVISION__ < 3)
 /* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */
 #define ANOMALY_05000142 (__SILICON_REVISION__ < 3)
@@ -52,7 +52,7 @@
 #define ANOMALY_05000146 (__SILICON_REVISION__ < 3)
 /* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */
 #define ANOMALY_05000147 (__SILICON_REVISION__ < 3)
-/* IMDMA S1/D1 channel may stall */
+/* IMDMA S1/D1 Channel May Stall */
 #define ANOMALY_05000149 (1)
 /* DMA engine may lose data due to incorrect handshaking */
 #define ANOMALY_05000150 (__SILICON_REVISION__ < 3)
@@ -66,7 +66,7 @@
 #define ANOMALY_05000154 (__SILICON_REVISION__ < 3)
 /* Timers in PWM-Out Mode with PPI GP Receive (Input) Mode with 0 Frame Syncs */
 #define ANOMALY_05000156 (__SILICON_REVISION__ < 4)
-/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */
+/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */
 #define ANOMALY_05000157 (__SILICON_REVISION__ < 3)
 /* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */
 #define ANOMALY_05000159 (__SILICON_REVISION__ < 3)
@@ -76,17 +76,17 @@
 #define ANOMALY_05000161 (__SILICON_REVISION__ < 3)
 /* DMEM_CONTROL<12> is not set on Reset */
 #define ANOMALY_05000162 (__SILICON_REVISION__ < 3)
-/* SPORT transmit data is not gated by external frame sync in certain conditions */
+/* SPORT Transmit Data Is Not Gated by External Frame Sync in Certain Conditions */
 #define ANOMALY_05000163 (__SILICON_REVISION__ < 3)
-/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */
+/* PPI Data Lengths between 8 and 16 Do Not Zero Out Upper Bits */
 #define ANOMALY_05000166 (1)
 /* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */
 #define ANOMALY_05000167 (1)
-/* SDRAM auto-refresh and subsequent Power Ups */
+/* Undefined Behavior when Power-Up Sequence Is Issued to SDRAM during Auto-Refresh */
 #define ANOMALY_05000168 (__SILICON_REVISION__ < 5)
-/* DATA CPLB page miss can result in lost write-through cache data writes */
+/* DATA CPLB Page Miss Can Result in Lost Write-Through Data Cache Writes */
 #define ANOMALY_05000169 (__SILICON_REVISION__ < 5)
-/* Boot-ROM code modifies SICA_IWRx wakeup registers */
+/* Boot-ROM Modifies SICA_IWRx Wakeup Registers */
 #define ANOMALY_05000171 (__SILICON_REVISION__ < 5)
 /* DSPID register values incorrect */
 #define ANOMALY_05000172 (__SILICON_REVISION__ < 3)
@@ -96,29 +96,29 @@
 #define ANOMALY_05000174 (__SILICON_REVISION__ < 5)
 /* Overlapping Sequencer and Memory Stalls */
 #define ANOMALY_05000175 (__SILICON_REVISION__ < 5)
-/* Multiplication of (-1) by (-1) followed by an accumulator saturation */
+/* Overflow Bit Asserted when Multiplication of -1 by -1 Followed by Accumulator Saturation */
 #define ANOMALY_05000176 (__SILICON_REVISION__ < 5)
 /* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */
 #define ANOMALY_05000179 (__SILICON_REVISION__ < 5)
 /* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */
 #define ANOMALY_05000180 (1)
-/* Disabling the PPI resets the PPI configuration registers */
+/* Disabling the PPI Resets the PPI Configuration Registers */
 #define ANOMALY_05000181 (__SILICON_REVISION__ < 5)
-/* IMDMA does not operate to full speed for 600MHz and higher devices */
+/* Internal Memory DMA Does Not Operate at Full Speed */
 #define ANOMALY_05000182 (1)
-/* Timer Pin limitations for PPI TX Modes with External Frame Syncs */
+/* Timer Pin Limitations for PPI TX Modes with External Frame Syncs */
 #define ANOMALY_05000184 (__SILICON_REVISION__ < 5)
-/* PPI TX Mode with 2 External Frame Syncs */
+/* Early PPI Transmit when FS1 Asserts before FS2 in TX Mode with 2 External Frame Syncs */
 #define ANOMALY_05000185 (__SILICON_REVISION__ < 5)
-/* PPI packing with Data Length greater than 8 bits (not a meaningful mode) */
+/* Upper PPI Pins Driven when PPI Packing Enabled and Data Length >8 Bits */
 #define ANOMALY_05000186 (__SILICON_REVISION__ < 5)
 /* IMDMA Corrupted Data after a Halt */
 #define ANOMALY_05000187 (1)
 /* IMDMA Restrictions on Descriptor and Buffer Placement in Memory */
 #define ANOMALY_05000188 (__SILICON_REVISION__ < 5)
-/* False Protection Exceptions */
+/* False Protection Exceptions when Speculative Fetch Is Cancelled */
 #define ANOMALY_05000189 (__SILICON_REVISION__ < 5)
-/* PPI not functional at core voltage < 1Volt */
+/* PPI Not Functional at Core Voltage < 1Volt */
 #define ANOMALY_05000190 (1)
 /* PPI does not invert the Driving PPICLK edge in Transmit Modes */
 #define ANOMALY_05000191 (__SILICON_REVISION__ < 3)
@@ -126,7 +126,7 @@
 #define ANOMALY_05000193 (__SILICON_REVISION__ < 5)
 /* Restarting SPORT in Specific Modes May Cause Data Corruption */
 #define ANOMALY_05000194 (__SILICON_REVISION__ < 5)
-/* Failing MMR Accesses When Stalled by Preceding Memory Read */
+/* Failing MMR Accesses when Preceding Memory Read Stalls */
 #define ANOMALY_05000198 (__SILICON_REVISION__ < 5)
 /* Current DMA Address Shows Wrong Value During Carry Fix */
 #define ANOMALY_05000199 (__SILICON_REVISION__ < 5)
@@ -134,9 +134,9 @@
 #define ANOMALY_05000200 (__SILICON_REVISION__ < 5)
 /* Possible Infinite Stall with Specific Dual-DAG Situation */
 #define ANOMALY_05000202 (__SILICON_REVISION__ < 5)
-/* Incorrect data read with write-through cache and allocate cache lines on reads only mode */
+/* Incorrect Data Read with Writethrough "Allocate Cache Lines on Reads Only" Cache Mode */
 #define ANOMALY_05000204 (__SILICON_REVISION__ < 5)
-/* Specific sequence that can cause DMA error or DMA stopping */
+/* Specific Sequence that Can Cause DMA Error or DMA Stopping */
 #define ANOMALY_05000205 (__SILICON_REVISION__ < 5)
 /* Recovery from "Brown-Out" Condition */
 #define ANOMALY_05000207 (__SILICON_REVISION__ < 5)
@@ -158,7 +158,7 @@
 #define ANOMALY_05000230 (__SILICON_REVISION__ < 5)
 /* UART STB Bit Incorrectly Affects Receiver Setting */
 #define ANOMALY_05000231 (__SILICON_REVISION__ < 5)
-/* SPORT data transmit lines are incorrectly driven in multichannel mode */
+/* SPORT Data Transmit Lines Are Incorrectly Driven in Multichannel Mode */
 #define ANOMALY_05000232 (__SILICON_REVISION__ < 5)
 /* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */
 #define ANOMALY_05000242 (__SILICON_REVISION__ < 5)
@@ -166,7 +166,7 @@
 #define ANOMALY_05000244 (__SILICON_REVISION__ < 5)
 /* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (__SILICON_REVISION__ < 5)
-/* TESTSET operation forces stall on the other core */
+/* TESTSET Operation Forces Stall on the Other Core */
 #define ANOMALY_05000248 (__SILICON_REVISION__ < 5)
 /* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */
 #define ANOMALY_05000250 (__SILICON_REVISION__ > 2 && __SILICON_REVISION__ < 5)
@@ -192,9 +192,9 @@
 #define ANOMALY_05000264 (__SILICON_REVISION__ < 5)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (__SILICON_REVISION__ < 5)
-/* IMDMA destination IRQ status must be read prior to using IMDMA */
+/* IMDMA Destination IRQ Status Must Be Read Prior to Using IMDMA */
 #define ANOMALY_05000266 (__SILICON_REVISION__ > 3)
-/* IMDMA may corrupt data under certain conditions */
+/* IMDMA May Corrupt Data under Certain Conditions */
 #define ANOMALY_05000267 (1)
 /* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */
 #define ANOMALY_05000269 (1)
@@ -202,7 +202,7 @@
 #define ANOMALY_05000270 (1)
 /* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
 #define ANOMALY_05000272 (1)
-/* Data cache write back to external synchronous memory may be lost */
+/* Data Cache Write Back to External Synchronous Memory May Be Lost */
 #define ANOMALY_05000274 (1)
 /* PPI Timing and Sampling Information Updates */
 #define ANOMALY_05000275 (__SILICON_REVISION__ > 2)
@@ -212,17 +212,17 @@
 #define ANOMALY_05000277 (__SILICON_REVISION__ < 3)
 /* Disabling Peripherals with DMA Running May Cause DMA System Instability */
 #define ANOMALY_05000278 (__SILICON_REVISION__ < 5)
-/* False Hardware Error Exception When ISR Context Is Not Restored */
+/* False Hardware Error Exception when ISR Context Is Not Restored */
 #define ANOMALY_05000281 (__SILICON_REVISION__ < 5)
-/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
+/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */
 #define ANOMALY_05000283 (1)
-/* A read will receive incorrect data under certain conditions */
+/* Reads Will Receive Incorrect Data under Certain Conditions */
 #define ANOMALY_05000287 (__SILICON_REVISION__ < 5)
 /* SPORTs May Receive Bad Data If FIFOs Fill Up */
 #define ANOMALY_05000288 (__SILICON_REVISION__ < 5)
 /* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
 #define ANOMALY_05000301 (1)
-/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
+/* SSYNCs after Writes to DMA MMR Registers May Not Be Handled Correctly */
 #define ANOMALY_05000302 (1)
 /* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
 #define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
@@ -230,25 +230,25 @@
 #define ANOMALY_05000307 (__SILICON_REVISION__ < 5)
 /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
 #define ANOMALY_05000310 (1)
-/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
 #define ANOMALY_05000312 (1)
 /* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
 #define ANOMALY_05000313 (1)
-/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
+/* Killed System MMR Write Completes Erroneously on Next System MMR Access */
 #define ANOMALY_05000315 (1)
-/* PF2 Output Remains Asserted After SPI Master Boot */
+/* PF2 Output Remains Asserted after SPI Master Boot */
 #define ANOMALY_05000320 (__SILICON_REVISION__ > 3)
-/* Erroneous GPIO Flag Pin Operations Under Specific Sequences */
+/* Erroneous GPIO Flag Pin Operations under Specific Sequences */
 #define ANOMALY_05000323 (1)
-/* SPORT Secondary Receive Channel Not Functional When Word Length Exceeds 16 Bits */
+/* SPORT Secondary Receive Channel Not Functional when Word Length >16 Bits */
 #define ANOMALY_05000326 (__SILICON_REVISION__ > 3)
-/* New Feature: 24-Bit SPI Boot Mode Support (Not Available On Older Silicon) */
+/* 24-Bit SPI Boot Mode Is Not Functional */
 #define ANOMALY_05000331 (__SILICON_REVISION__ < 5)
-/* New Feature: Slave SPI Boot Mode Supported (Not Available On Older Silicon) */
+/* Slave SPI Boot Mode Is Not Functional */
 #define ANOMALY_05000332 (__SILICON_REVISION__ < 5)
-/* Flag Data Register Writes One SCLK Cycle After Edge Is Detected May Clear Interrupt Status */
+/* Flag Data Register Writes One SCLK Cycle after Edge Is Detected May Clear Interrupt Status */
 #define ANOMALY_05000333 (__SILICON_REVISION__ < 5)
-/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available on Older Silicon) */
+/* ALT_TIMING Bit in PLL_CTL Register Is Not Functional */
 #define ANOMALY_05000339 (__SILICON_REVISION__ < 5)
 /* Memory DMA FIFO Causes Throughput Degradation on Writes to External Memory */
 #define ANOMALY_05000343 (__SILICON_REVISION__ < 5)
@@ -276,7 +276,7 @@
 #define ANOMALY_05000428 (__SILICON_REVISION__ > 3)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
-/* False Hardware Error when RETI points to invalid memory */
+/* False Hardware Error when RETI Points to Invalid Memory */
 #define ANOMALY_05000461 (1)
 
 /* Anomalies that don't exist on this proc */
@@ -284,6 +284,7 @@
 #define ANOMALY_05000158 (0)
 #define ANOMALY_05000183 (0)
 #define ANOMALY_05000233 (0)
+#define ANOMALY_05000234 (0)
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000353 (1)
@@ -298,5 +299,7 @@
 #define ANOMALY_05000448 (0)
 #define ANOMALY_05000456 (0)
 #define ANOMALY_05000450 (0)
+#define ANOMALY_05000465 (0)
+#define ANOMALY_05000467 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf561/include/mach/blackfin.h b/arch/blackfin/mach-bf561/include/mach/blackfin.h
index f79f6626b7e..8be31358ef8 100644
--- a/arch/blackfin/mach-bf561/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf561/include/mach/blackfin.h
@@ -34,7 +34,6 @@
 #define BF561_FAMILY
 
 #include "bf561.h"
-#include "mem_map.h"
 #include "defBF561.h"
 #include "anomaly.h"
 
diff --git a/arch/blackfin/mach-bf561/include/mach/mem_map.h b/arch/blackfin/mach-bf561/include/mach/mem_map.h
index 419dffdc96e..a63e15c86d9 100644
--- a/arch/blackfin/mach-bf561/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf561/include/mach/mem_map.h
@@ -1,13 +1,16 @@
 /*
- * Memory MAP
- * Common header file for blackfin BF561 of processors.
+ * BF561 memory map
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
  */
 
-#ifndef _MEM_MAP_561_H_
-#define _MEM_MAP_561_H_
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
 
-#define COREMMR_BASE           0xFFE00000	 /* Core MMRs */
-#define SYSMMR_BASE            0xFFC00000	 /* System MMRs */
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
 
 /* Async Memory Banks */
 #define ASYNC_BANK3_BASE	0x2C000000	 /* Async Bank 3 */
@@ -82,9 +85,6 @@
 #define COREA_L1_SCRATCH_START	0xFFB00000
 #define COREB_L1_SCRATCH_START	0xFF700000
 
-#define L1_SCRATCH_START	COREA_L1_SCRATCH_START
-#define L1_SCRATCH_LENGTH	0x1000
-
 #ifdef __ASSEMBLY__
 
 /*
@@ -155,14 +155,42 @@
 	dreg = ROT dreg BY -1;		\
 	dreg = CC;
 
-#else
-#define GET_PDA_SAFE(preg)		\
-	preg.l = _cpu_pda;		\
-	preg.h = _cpu_pda;
+static inline unsigned long get_l1_scratch_start_cpu(int cpu)
+{
+	return cpu ? COREB_L1_SCRATCH_START : COREA_L1_SCRATCH_START;
+}
+static inline unsigned long get_l1_code_start_cpu(int cpu)
+{
+	return cpu ? COREB_L1_CODE_START : COREA_L1_CODE_START;
+}
+static inline unsigned long get_l1_data_a_start_cpu(int cpu)
+{
+	return cpu ? COREB_L1_DATA_A_START : COREA_L1_DATA_A_START;
+}
+static inline unsigned long get_l1_data_b_start_cpu(int cpu)
+{
+	return cpu ? COREB_L1_DATA_B_START : COREA_L1_DATA_B_START;
+}
+
+static inline unsigned long get_l1_scratch_start(void)
+{
+	return get_l1_scratch_start_cpu(blackfin_core_id());
+}
+static inline unsigned long get_l1_code_start(void)
+{
+	return get_l1_code_start_cpu(blackfin_core_id());
+}
+static inline unsigned long get_l1_data_a_start(void)
+{
+	return get_l1_data_a_start_cpu(blackfin_core_id());
+}
+static inline unsigned long get_l1_data_b_start(void)
+{
+	return get_l1_data_b_start_cpu(blackfin_core_id());
+}
 
-#define GET_PDA(preg, dreg)	GET_PDA_SAFE(preg)
 #endif /* CONFIG_SMP */
 
 #endif /* __ASSEMBLY__ */
 
-#endif				/* _MEM_MAP_533_H_ */
+#endif
diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile
index 1f3228ed713..dd8b2dc97f5 100644
--- a/arch/blackfin/mach-common/Makefile
+++ b/arch/blackfin/mach-common/Makefile
@@ -4,7 +4,7 @@
 
 obj-y := \
 	cache.o cache-c.o entry.o head.o \
-	interrupt.o irqpanic.o arch_checks.o ints-priority.o
+	interrupt.o arch_checks.o ints-priority.o
 
 obj-$(CONFIG_BFIN_ICACHE_LOCK) += lock.o
 obj-$(CONFIG_PM)          += pm.o dpmc_modes.o
@@ -12,3 +12,4 @@ obj-$(CONFIG_CPU_FREQ)    += cpufreq.o
 obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o
 obj-$(CONFIG_SMP)         += smp.o
 obj-$(CONFIG_BFIN_KERNEL_CLOCK) += clocks-init.o
+obj-$(CONFIG_DEBUG_ICACHE_CHECK) += irqpanic.o
diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c
index da93d920716..5998d8632a7 100644
--- a/arch/blackfin/mach-common/arch_checks.c
+++ b/arch/blackfin/mach-common/arch_checks.c
@@ -74,7 +74,7 @@
 
 /* if 220 exists, can not set External Memory WB and L2 not_cached, either External Memory not_cached and L2 WB */
 #if ANOMALY_05000220 && \
-	((defined(CONFIG_BFIN_WB) && defined(CONFIG_BFIN_L2_NOT_CACHED)) || \
-	 (!defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_L2_WB)))
+	((defined(CONFIG_BFIN_EXTMEM_WRITEBACK) && !defined(CONFIG_BFIN_L2_DCACHEABLE)) || \
+	 (!defined(CONFIG_BFIN_EXTMEM_DCACHEABLE) && defined(CONFIG_BFIN_L2_WRITEBACK)))
 # error You are exposing Anomaly 220 in this config, either config L2 as Write Through, or make External Memory WB.
 #endif
diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c
index 70e3411f558..85c65808327 100644
--- a/arch/blackfin/mach-common/cpufreq.c
+++ b/arch/blackfin/mach-common/cpufreq.c
@@ -141,7 +141,7 @@ static int __init __bfin_cpu_init(struct cpufreq_policy *policy)
 	sclk = get_sclk() / 1000;
 
 #if ANOMALY_05000273 || ANOMALY_05000274 || \
-	(!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_DCACHE))
+	(!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_EXTMEM_DCACHEABLE))
 	min_cclk = sclk * 2;
 #else
 	min_cclk = sclk;
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 31fa313e81c..5a4e7c7fd92 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -1609,6 +1609,7 @@ ENTRY(_sys_call_table)
 	.long _sys_preadv
 	.long _sys_pwritev
 	.long _sys_rt_tgsigqueueinfo
+	.long _sys_perf_counter_open
 
 	.rept NR_syscalls-(.-_sys_call_table)/4
 	.long _sys_ni_syscall
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index 351afd0e36d..b42150190d0 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -472,7 +472,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
 
 	if (type == IRQ_TYPE_PROBE) {
 		/* only probe unenabled GPIO interrupt lines */
-		if (__test_bit(gpionr, gpio_enabled))
+		if (test_bit(gpionr, gpio_enabled))
 			return 0;
 		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
 	}
@@ -782,7 +782,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
 
 	if (type == IRQ_TYPE_PROBE) {
 		/* only probe unenabled GPIO interrupt lines */
-		if (__test_bit(gpionr, gpio_enabled))
+		if (test_bit(gpionr, gpio_enabled))
 			return 0;
 		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
 	}
@@ -1052,35 +1052,34 @@ int __init init_arch_irq(void)
 			set_irq_chained_handler(irq, bfin_demux_error_irq);
 			break;
 #endif
-#if defined(CONFIG_TICKSOURCE_GPTMR0)
-		case IRQ_TIMER0:
-			set_irq_handler(irq, handle_percpu_irq);
-			break;
-#endif
 #ifdef CONFIG_SMP
 		case IRQ_SUPPLE_0:
 		case IRQ_SUPPLE_1:
 			set_irq_handler(irq, handle_percpu_irq);
 			break;
 #endif
-		default:
 #ifdef CONFIG_IPIPE
-			/*
-			 * We want internal interrupt sources to be
-			 * masked, because ISRs may trigger interrupts
-			 * recursively (e.g. DMA), but interrupts are
-			 * _not_ masked at CPU level. So let's handle
-			 * most of them as level interrupts, except
-			 * the timer interrupt which is special.
-			 */
-			if (irq == IRQ_SYSTMR || irq == IRQ_CORETMR)
-				set_irq_handler(irq, handle_simple_irq);
-			else
-				set_irq_handler(irq, handle_level_irq);
+#ifndef CONFIG_TICKSOURCE_CORETMR
+		case IRQ_TIMER0:
+			set_irq_handler(irq, handle_simple_irq);
+			break;
+#endif /* !CONFIG_TICKSOURCE_CORETMR */
+		case IRQ_CORETMR:
+			set_irq_handler(irq, handle_simple_irq);
+			break;
+		default:
+			set_irq_handler(irq, handle_level_irq);
+			break;
 #else /* !CONFIG_IPIPE */
+#ifdef CONFIG_TICKSOURCE_GPTMR0
+		case IRQ_TIMER0:
+			set_irq_handler(irq, handle_percpu_irq);
+			break;
+#endif /* CONFIG_TICKSOURCE_GPTMR0 */
+		default:
 			set_irq_handler(irq, handle_simple_irq);
-#endif /* !CONFIG_IPIPE */
 			break;
+#endif	/* !CONFIG_IPIPE */
 		}
 	}
 
@@ -1224,15 +1223,14 @@ __attribute__((l1_text))
 asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
 {
 	struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
-	struct ipipe_domain *this_domain = ipipe_current_domain;
+	struct ipipe_domain *this_domain = __ipipe_current_domain;
 	struct ivgx *ivg_stop = ivg7_13[vec-IVG7].istop;
 	struct ivgx *ivg = ivg7_13[vec-IVG7].ifirst;
 	int irq, s;
 
-	if (likely(vec == EVT_IVTMR_P)) {
+	if (likely(vec == EVT_IVTMR_P))
 		irq = IRQ_CORETMR;
-
-	} else {
+	else {
 #if defined(SIC_ISR0) || defined(SICA_ISR0)
 		unsigned long sic_status[3];
 
@@ -1262,12 +1260,11 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
 				break;
 		}
 #endif
-
 		irq = ivg->irqno;
 	}
 
 	if (irq == IRQ_SYSTMR) {
-#ifndef CONFIG_GENERIC_CLOCKEVENTS
+#if !defined(CONFIG_GENERIC_CLOCKEVENTS) || defined(CONFIG_TICKSOURCE_GPTMR0)
 		bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */
 #endif
 		/* This is basically what we need from the register frame. */
diff --git a/arch/blackfin/mach-common/irqpanic.c b/arch/blackfin/mach-common/irqpanic.c
index 05004df0f78..883e3241b17 100644
--- a/arch/blackfin/mach-common/irqpanic.c
+++ b/arch/blackfin/mach-common/irqpanic.c
@@ -30,21 +30,17 @@
 #include <linux/module.h>
 #include <linux/kernel_stat.h>
 #include <linux/sched.h>
-#include <asm/traps.h>
 #include <asm/blackfin.h>
 
-#ifdef CONFIG_DEBUG_ICACHE_CHECK
 #define L1_ICACHE_START 0xffa10000
 #define L1_ICACHE_END   0xffa13fff
-void irq_panic(int reason, struct pt_regs *regs) __attribute__ ((l1_text));
-#endif
 
 /*
  * irq_panic - calls panic with string setup
  */
+__attribute__ ((l1_text))
 asmlinkage void irq_panic(int reason, struct pt_regs *regs)
 {
-#ifdef CONFIG_DEBUG_ICACHE_CHECK
 	unsigned int cmd, tag, ca, cache_hi, cache_lo, *pa;
 	unsigned short i, j, die;
 	unsigned int bad[10][6];
@@ -126,9 +122,6 @@ asmlinkage void irq_panic(int reason, struct pt_regs *regs)
 			     bad[j][3], bad[j][4], bad[j][5]);
 		}
 		panic("icache coherency error");
-	} else {
+	} else
 		printk(KERN_EMERG "icache checked, and OK\n");
-	}
-#endif
-
 }
diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
index bce5a84be49..9e7e27b7fc8 100644
--- a/arch/blackfin/mach-common/pm.c
+++ b/arch/blackfin/mach-common/pm.c
@@ -132,7 +132,7 @@ int bf53x_resume_l1_mem(unsigned char *memptr)
 	return 0;
 }
 
-#ifdef CONFIG_BFIN_WB
+#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
 static void flushinv_all_dcache(void)
 {
 	u32 way, bank, subbank, set;
@@ -175,7 +175,7 @@ static inline void dcache_disable(void)
 #ifdef CONFIG_BFIN_DCACHE
 	unsigned long ctrl;
 
-#ifdef CONFIG_BFIN_WB
+#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
 	flushinv_all_dcache();
 #endif
 	SSYNC();
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index 014a55abd09..68bd0bd680c 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -160,7 +160,7 @@ void __init mem_init(void)
 
 	/* do not count in kernel image between _rambase and _ramstart */
 	reservedpages -= (_ramstart - _rambase) >> PAGE_SHIFT;
-#if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
+#if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
 	reservedpages += (_ramend - memory_end - DMA_UNCACHED_REGION) >> PAGE_SHIFT;
 #endif
 
diff --git a/arch/cris/arch-v10/kernel/dma.c b/arch/cris/arch-v10/kernel/dma.c
index 929e6866629..d31504b4a19 100644
--- a/arch/cris/arch-v10/kernel/dma.c
+++ b/arch/cris/arch-v10/kernel/dma.c
@@ -24,7 +24,7 @@ int cris_request_dma(unsigned int dmanr, const char * device_id,
 	unsigned long int gens;
 	int fail = -EINVAL;
 
-	if ((dmanr < 0) || (dmanr >= MAX_DMA_CHANNELS)) {
+	if (dmanr >= MAX_DMA_CHANNELS) {
 		printk(KERN_CRIT "cris_request_dma: invalid DMA channel %u\n", dmanr);
 		return -EINVAL;
 	}
@@ -213,7 +213,7 @@ int cris_request_dma(unsigned int dmanr, const char * device_id,
 void cris_free_dma(unsigned int dmanr, const char * device_id)
 {
 	unsigned long flags;
-	if ((dmanr < 0) || (dmanr >= MAX_DMA_CHANNELS)) {
+	if (dmanr >= MAX_DMA_CHANNELS) {
 		printk(KERN_CRIT "cris_free_dma: invalid DMA channel %u\n", dmanr);
 		return;
 	}
diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c
index 67c61ea8681..fd529a0ec75 100644
--- a/arch/cris/arch-v32/drivers/cryptocop.c
+++ b/arch/cris/arch-v32/drivers/cryptocop.c
@@ -1395,7 +1395,7 @@ static int create_md5_pad(int alloc_flag, unsigned long long hashed_length, char
 	if (padlen < MD5_MIN_PAD_LENGTH) padlen += MD5_BLOCK_LENGTH;
 
 	p = kmalloc(padlen, alloc_flag);
-	if (!pad) return -ENOMEM;
+	if (!p) return -ENOMEM;
 
 	*p = 0x80;
 	memset(p+1, 0, padlen - 1);
@@ -1427,7 +1427,7 @@ static int create_sha1_pad(int alloc_flag, unsigned long long hashed_length, cha
 	if (padlen < SHA1_MIN_PAD_LENGTH) padlen += SHA1_BLOCK_LENGTH;
 
 	p = kmalloc(padlen, alloc_flag);
-	if (!pad) return -ENOMEM;
+	if (!p) return -ENOMEM;
 
 	*p = 0x80;
 	memset(p+1, 0, padlen - 1);
diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c
index d70b445f4a8..57668db2503 100644
--- a/arch/cris/arch-v32/kernel/irq.c
+++ b/arch/cris/arch-v32/kernel/irq.c
@@ -430,8 +430,8 @@ crisv32_do_multiple(struct pt_regs* regs)
 			 masked[i] &= ~TIMER_MASK;
 			 do_IRQ(TIMER0_INTR_VECT, regs);
 		}
-	}
 #endif
+	}
 
 #ifdef IGNORE_MASK
 	/* Remove IRQs that can't be handled as multiple. */
diff --git a/arch/cris/arch-v32/lib/Makefile b/arch/cris/arch-v32/lib/Makefile
index eb4aad1f115..dd296b9db03 100644
--- a/arch/cris/arch-v32/lib/Makefile
+++ b/arch/cris/arch-v32/lib/Makefile
@@ -3,5 +3,5 @@
 #
 
 lib-y  = checksum.o checksumcopy.o string.o usercopy.o memset.o \
-	csumcpfruser.o spinlock.o delay.o
+	csumcpfruser.o spinlock.o delay.o strcmp.o
 
diff --git a/arch/cris/arch-v32/lib/strcmp.S b/arch/cris/arch-v32/lib/strcmp.S
new file mode 100644
index 00000000000..8f7a1ee6259
--- /dev/null
+++ b/arch/cris/arch-v32/lib/strcmp.S
@@ -0,0 +1,21 @@
+; strcmp.S -- CRISv32 version.
+; Copyright (C) 2008 AXIS Communications AB
+; Written by Edgar E. Iglesias
+;
+; This source code is licensed under the GNU General Public License,
+; Version 2.  See the file COPYING for more details.
+
+	.global	strcmp
+	.type	strcmp,@function
+strcmp:
+1:
+	move.b	[$r10+], $r12
+	seq	$r13
+	sub.b	[$r11+], $r12
+	or.b	$r12, $r13
+	beq	1b
+	nop
+
+	ret
+	movs.b	$r12, $r10
+	.size	strcmp, . - strcmp
diff --git a/arch/cris/include/arch-v32/arch/spinlock.h b/arch/cris/include/arch-v32/arch/spinlock.h
index 129756b9666..367a53ea10c 100644
--- a/arch/cris/include/arch-v32/arch/spinlock.h
+++ b/arch/cris/include/arch-v32/arch/spinlock.h
@@ -78,7 +78,7 @@ static  inline void __raw_write_lock(raw_rwlock_t *rw)
 {
 	__raw_spin_lock(&rw->slock);
 	while (rw->lock != RW_LOCK_BIAS);
-	rw->lock == 0;
+	rw->lock = 0;
 	__raw_spin_unlock(&rw->slock);
 }
 
@@ -93,7 +93,7 @@ static  inline void __raw_write_unlock(raw_rwlock_t *rw)
 {
 	__raw_spin_lock(&rw->slock);
 	while (rw->lock != RW_LOCK_BIAS);
-	rw->lock == RW_LOCK_BIAS;
+	rw->lock = RW_LOCK_BIAS;
 	__raw_spin_unlock(&rw->slock);
 }
 
@@ -114,7 +114,7 @@ static  inline int __raw_write_trylock(raw_rwlock_t *rw)
 	int ret = 0;
 	__raw_spin_lock(&rw->slock);
 	if (rw->lock == RW_LOCK_BIAS) {
-		rw->lock == 0;
+		rw->lock = 0;
 		ret = 1;
 	}
 	__raw_spin_unlock(&rw->slock);
diff --git a/arch/cris/include/asm/string.h b/arch/cris/include/asm/string.h
index 691190e99a2..d5db39f9eea 100644
--- a/arch/cris/include/asm/string.h
+++ b/arch/cris/include/asm/string.h
@@ -11,4 +11,10 @@ extern void *memcpy(void *, const void *, size_t);
 #define __HAVE_ARCH_MEMSET
 extern void *memset(void *, int, size_t);
 
+#ifdef CONFIG_ETRAX_ARCH_V32
+/* For v32 we provide strcmp.  */
+#define __HAVE_ARCH_STRCMP
+extern int strcmp(const char *s1, const char *s2);
+#endif
+
 #endif
diff --git a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c
index c4c76db90f9..f925115e325 100644
--- a/arch/cris/mm/fault.c
+++ b/arch/cris/mm/fault.c
@@ -163,7 +163,7 @@ do_page_fault(unsigned long address, struct pt_regs *regs,
 	 * the fault.
 	 */
 
-	fault = handle_mm_fault(mm, vma, address, writeaccess & 1);
+	fault = handle_mm_fault(mm, vma, address, (writeaccess & 1) ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
diff --git a/arch/frv/mm/fault.c b/arch/frv/mm/fault.c
index 05093d41d98..30f5d100a81 100644
--- a/arch/frv/mm/fault.c
+++ b/arch/frv/mm/fault.c
@@ -163,7 +163,7 @@ asmlinkage void do_page_fault(int datammu, unsigned long esr0, unsigned long ear
 	 * make sure we exit gracefully rather than endlessly redo
 	 * the fault.
 	 */
-	fault = handle_mm_fault(mm, vma, ear0, write);
+	fault = handle_mm_fault(mm, vma, ear0, write ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
diff --git a/arch/h8300/Kconfig.cpu b/arch/h8300/Kconfig.cpu
index b65dcfe51d9..6e2ecff199c 100644
--- a/arch/h8300/Kconfig.cpu
+++ b/arch/h8300/Kconfig.cpu
@@ -13,7 +13,7 @@ config H8300H_GENERIC
 
 config H8300H_AKI3068NET
 	bool "AE-3068/69"
-	select CONFIG_H83068
+	select H83068
 	help
 	  AKI-H8/3068F / AKI-H8/3069F Flashmicom LAN Board Support
 	  More Information. (Japanese Only)
@@ -24,7 +24,7 @@ config H8300H_AKI3068NET
 
 config H8300H_H8MAX
 	bool "H8MAX"
-	select CONFIG_H83068
+	select H83068
 	help
 	  H8MAX Evaluation Board Support
 	  More Information. (Japanese Only)
@@ -32,7 +32,7 @@ config H8300H_H8MAX
 
 config H8300H_SIM
 	bool "H8/300H Simulator"
-	select CONFIG_H83007
+	select H83007
 	help
 	  GDB Simulator Support
 	  More Information.
@@ -45,7 +45,7 @@ config H8S_GENERIC
 
 config H8S_EDOSK2674
 	bool "EDOSK-2674"
-	select CONFIG_H8S2768
+	select H8S2678
 	help
 	  Renesas EDOSK-2674 Evaluation Board Support
 	  More Information.
diff --git a/arch/h8300/kernel/asm-offsets.c b/arch/h8300/kernel/asm-offsets.c
index 2042552e087..fd961e0bd74 100644
--- a/arch/h8300/kernel/asm-offsets.c
+++ b/arch/h8300/kernel/asm-offsets.c
@@ -55,7 +55,6 @@ int main(void)
 	DEFINE(LRET,  offsetof(struct pt_regs, pc)       - sizeof(long));
 
 	DEFINE(PT_PTRACED, PT_PTRACED);
-	DEFINE(PT_DTRACE, PT_DTRACE);
 
 	return 0;
 }
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 294a3b13eca..170042b420d 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -28,6 +28,7 @@ config IA64
 	select HAVE_DMA_ATTRS
 	select HAVE_KVM
 	select HAVE_ARCH_TRACEHOOK
+	select HAVE_DMA_API_DEBUG
 	default y
 	help
 	  The Itanium Processor Family is Intel's 64-bit successor to
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index fe63b2dc9d0..8cfb001092a 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -1787,7 +1787,7 @@ static struct ioc_iommu ioc_iommu_info[] __initdata = {
 };
 
 static struct ioc * __init
-ioc_init(u64 hpa, void *handle)
+ioc_init(unsigned long hpa, void *handle)
 {
 	struct ioc *ioc;
 	struct ioc_iommu *info;
diff --git a/arch/ia64/hp/sim/hpsim_irq.c b/arch/ia64/hp/sim/hpsim_irq.c
index acb5047ab57..b272261d77c 100644
--- a/arch/ia64/hp/sim/hpsim_irq.c
+++ b/arch/ia64/hp/sim/hpsim_irq.c
@@ -27,7 +27,7 @@ hpsim_set_affinity_noop(unsigned int a, const struct cpumask *b)
 	return 0;
 }
 
-static struct hw_interrupt_type irq_type_hp_sim = {
+static struct irq_chip irq_type_hp_sim = {
 	.name =		"hpsim",
 	.startup =	hpsim_irq_startup,
 	.shutdown =	hpsim_irq_noop,
@@ -41,12 +41,12 @@ static struct hw_interrupt_type irq_type_hp_sim = {
 void __init
 hpsim_irq_init (void)
 {
-	irq_desc_t *idesc;
+	struct irq_desc *idesc;
 	int i;
 
 	for (i = 0; i < NR_IRQS; ++i) {
 		idesc = irq_desc + i;
-		if (idesc->chip == &no_irq_type)
+		if (idesc->chip == &no_irq_chip)
 			idesc->chip = &irq_type_hp_sim;
 	}
 }
diff --git a/arch/ia64/include/asm/Kbuild b/arch/ia64/include/asm/Kbuild
index ccbe8ae47a6..c7d0a71b924 100644
--- a/arch/ia64/include/asm/Kbuild
+++ b/arch/ia64/include/asm/Kbuild
@@ -2,7 +2,6 @@ include include/asm-generic/Kbuild.asm
 
 header-y += break.h
 header-y += fpu.h
-header-y += fpswa.h
 header-y += ia64regs.h
 header-y += intel_intrin.h
 header-y += perfmon_default_smpl.h
diff --git a/arch/ia64/include/asm/dma-mapping.h b/arch/ia64/include/asm/dma-mapping.h
index 36c0009dbec..5a61b5c2e18 100644
--- a/arch/ia64/include/asm/dma-mapping.h
+++ b/arch/ia64/include/asm/dma-mapping.h
@@ -8,6 +8,7 @@
 #include <asm/machvec.h>
 #include <linux/scatterlist.h>
 #include <asm/swiotlb.h>
+#include <linux/dma-debug.h>
 
 #define ARCH_HAS_DMA_GET_REQUIRED_MASK
 
@@ -24,95 +25,28 @@ static inline void *dma_alloc_coherent(struct device *dev, size_t size,
 				       dma_addr_t *daddr, gfp_t gfp)
 {
 	struct dma_map_ops *ops = platform_dma_get_ops(dev);
-	return ops->alloc_coherent(dev, size, daddr, gfp);
+	void *caddr;
+
+	caddr = ops->alloc_coherent(dev, size, daddr, gfp);
+	debug_dma_alloc_coherent(dev, size, *daddr, caddr);
+	return caddr;
 }
 
 static inline void dma_free_coherent(struct device *dev, size_t size,
 				     void *caddr, dma_addr_t daddr)
 {
 	struct dma_map_ops *ops = platform_dma_get_ops(dev);
+	debug_dma_free_coherent(dev, size, caddr, daddr);
 	ops->free_coherent(dev, size, caddr, daddr);
 }
 
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 
-static inline dma_addr_t dma_map_single_attrs(struct device *dev,
-					      void *caddr, size_t size,
-					      enum dma_data_direction dir,
-					      struct dma_attrs *attrs)
-{
-	struct dma_map_ops *ops = platform_dma_get_ops(dev);
-	return ops->map_page(dev, virt_to_page(caddr),
-			     (unsigned long)caddr & ~PAGE_MASK, size,
-			     dir, attrs);
-}
-
-static inline void dma_unmap_single_attrs(struct device *dev, dma_addr_t daddr,
-					  size_t size,
-					  enum dma_data_direction dir,
-					  struct dma_attrs *attrs)
-{
-	struct dma_map_ops *ops = platform_dma_get_ops(dev);
-	ops->unmap_page(dev, daddr, size, dir, attrs);
-}
-
-#define dma_map_single(d, a, s, r) dma_map_single_attrs(d, a, s, r, NULL)
-#define dma_unmap_single(d, a, s, r) dma_unmap_single_attrs(d, a, s, r, NULL)
-
-static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sgl,
-				   int nents, enum dma_data_direction dir,
-				   struct dma_attrs *attrs)
-{
-	struct dma_map_ops *ops = platform_dma_get_ops(dev);
-	return ops->map_sg(dev, sgl, nents, dir, attrs);
-}
-
-static inline void dma_unmap_sg_attrs(struct device *dev,
-				      struct scatterlist *sgl, int nents,
-				      enum dma_data_direction dir,
-				      struct dma_attrs *attrs)
-{
-	struct dma_map_ops *ops = platform_dma_get_ops(dev);
-	ops->unmap_sg(dev, sgl, nents, dir, attrs);
-}
-
-#define dma_map_sg(d, s, n, r) dma_map_sg_attrs(d, s, n, r, NULL)
-#define dma_unmap_sg(d, s, n, r) dma_unmap_sg_attrs(d, s, n, r, NULL)
-
-static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t daddr,
-					   size_t size,
-					   enum dma_data_direction dir)
-{
-	struct dma_map_ops *ops = platform_dma_get_ops(dev);
-	ops->sync_single_for_cpu(dev, daddr, size, dir);
-}
-
-static inline void dma_sync_sg_for_cpu(struct device *dev,
-				       struct scatterlist *sgl,
-				       int nents, enum dma_data_direction dir)
-{
-	struct dma_map_ops *ops = platform_dma_get_ops(dev);
-	ops->sync_sg_for_cpu(dev, sgl, nents, dir);
-}
+#define get_dma_ops(dev) platform_dma_get_ops(dev)
+#define flush_write_buffers()
 
-static inline void dma_sync_single_for_device(struct device *dev,
-					      dma_addr_t daddr,
-					      size_t size,
-					      enum dma_data_direction dir)
-{
-	struct dma_map_ops *ops = platform_dma_get_ops(dev);
-	ops->sync_single_for_device(dev, daddr, size, dir);
-}
-
-static inline void dma_sync_sg_for_device(struct device *dev,
-					  struct scatterlist *sgl,
-					  int nents,
-					  enum dma_data_direction dir)
-{
-	struct dma_map_ops *ops = platform_dma_get_ops(dev);
-	ops->sync_sg_for_device(dev, sgl, nents, dir);
-}
+#include <asm-generic/dma-mapping-common.h>
 
 static inline int dma_mapping_error(struct device *dev, dma_addr_t daddr)
 {
@@ -120,30 +54,6 @@ static inline int dma_mapping_error(struct device *dev, dma_addr_t daddr)
 	return ops->mapping_error(dev, daddr);
 }
 
-static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
-				      size_t offset, size_t size,
-				      enum dma_data_direction dir)
-{
-	struct dma_map_ops *ops = platform_dma_get_ops(dev);
-	return ops->map_page(dev, page, offset, size, dir, NULL);
-}
-
-static inline void dma_unmap_page(struct device *dev, dma_addr_t addr,
-				  size_t size, enum dma_data_direction dir)
-{
-	dma_unmap_single(dev, addr, size, dir);
-}
-
-/*
- * Rest of this file is part of the "Advanced DMA API".  Use at your own risk.
- * See Documentation/DMA-API.txt for details.
- */
-
-#define dma_sync_single_range_for_cpu(dev, dma_handle, offset, size, dir)	\
-	dma_sync_single_for_cpu(dev, dma_handle, size, dir)
-#define dma_sync_single_range_for_device(dev, dma_handle, offset, size, dir)	\
-	dma_sync_single_for_device(dev, dma_handle, size, dir)
-
 static inline int dma_supported(struct device *dev, u64 mask)
 {
 	struct dma_map_ops *ops = platform_dma_get_ops(dev);
diff --git a/arch/ia64/include/asm/gcc_intrin.h b/arch/ia64/include/asm/gcc_intrin.h
index c2c5fd8fcac..21ddee54ada 100644
--- a/arch/ia64/include/asm/gcc_intrin.h
+++ b/arch/ia64/include/asm/gcc_intrin.h
@@ -388,7 +388,7 @@ register unsigned long ia64_r13 asm ("r13") __used;
 
 #define ia64_native_thash(addr)							\
 ({										\
-	__u64 ia64_intri_res;							\
+	unsigned long ia64_intri_res;						\
 	asm volatile ("thash %0=%1" : "=r"(ia64_intri_res) : "r" (addr));	\
 	ia64_intri_res;								\
 })
@@ -419,7 +419,7 @@ register unsigned long ia64_r13 asm ("r13") __used;
 
 #define ia64_tpa(addr)								\
 ({										\
-	__u64 ia64_pa;								\
+	unsigned long ia64_pa;							\
 	asm volatile ("tpa %0 = %1" : "=r"(ia64_pa) : "r"(addr) : "memory");	\
 	ia64_pa;								\
 })
@@ -444,35 +444,35 @@ register unsigned long ia64_r13 asm ("r13") __used;
 
 #define ia64_native_get_cpuid(index)							\
 ({											\
-	__u64 ia64_intri_res;								\
+	unsigned long ia64_intri_res;							\
 	asm volatile ("mov %0=cpuid[%r1]" : "=r"(ia64_intri_res) : "rO"(index));	\
 	ia64_intri_res;									\
 })
 
 #define __ia64_get_dbr(index)							\
 ({										\
-	__u64 ia64_intri_res;							\
+	unsigned long ia64_intri_res;						\
 	asm volatile ("mov %0=dbr[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
 	ia64_intri_res;								\
 })
 
 #define ia64_get_ibr(index)							\
 ({										\
-	__u64 ia64_intri_res;							\
+	unsigned long ia64_intri_res;						\
 	asm volatile ("mov %0=ibr[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
 	ia64_intri_res;								\
 })
 
 #define ia64_get_pkr(index)							\
 ({										\
-	__u64 ia64_intri_res;							\
+	unsigned long ia64_intri_res;						\
 	asm volatile ("mov %0=pkr[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
 	ia64_intri_res;								\
 })
 
 #define ia64_get_pmc(index)							\
 ({										\
-	__u64 ia64_intri_res;							\
+	unsigned long ia64_intri_res;						\
 	asm volatile ("mov %0=pmc[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
 	ia64_intri_res;								\
 })
@@ -480,14 +480,14 @@ register unsigned long ia64_r13 asm ("r13") __used;
 
 #define ia64_native_get_pmd(index)						\
 ({										\
-	__u64 ia64_intri_res;							\
+	unsigned long ia64_intri_res;						\
 	asm volatile ("mov %0=pmd[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
 	ia64_intri_res;								\
 })
 
 #define ia64_native_get_rr(index)						\
 ({										\
-	__u64 ia64_intri_res;							\
+	unsigned long ia64_intri_res;						\
 	asm volatile ("mov %0=rr[%1]" : "=r"(ia64_intri_res) : "r" (index));	\
 	ia64_intri_res;								\
 })
diff --git a/arch/ia64/include/asm/hw_irq.h b/arch/ia64/include/asm/hw_irq.h
index 5c99cbcb8a0..91619b31dbf 100644
--- a/arch/ia64/include/asm/hw_irq.h
+++ b/arch/ia64/include/asm/hw_irq.h
@@ -106,7 +106,7 @@ extern struct irq_cfg irq_cfg[NR_IRQS];
 #define irq_to_domain(x)	irq_cfg[(x)].domain
 DECLARE_PER_CPU(int[IA64_NUM_VECTORS], vector_irq);
 
-extern struct hw_interrupt_type irq_type_ia64_lsapic;	/* CPU-internal interrupt controller */
+extern struct irq_chip irq_type_ia64_lsapic;	/* CPU-internal interrupt controller */
 
 #ifdef CONFIG_PARAVIRT_GUEST
 #include <asm/paravirt.h>
@@ -146,7 +146,7 @@ static inline void ia64_native_resend_irq(unsigned int vector)
  * Default implementations for the irq-descriptor API:
  */
 
-extern irq_desc_t irq_desc[NR_IRQS];
+extern struct irq_desc irq_desc[NR_IRQS];
 
 #ifndef CONFIG_IA64_GENERIC
 static inline ia64_vector __ia64_irq_to_vector(int irq)
diff --git a/arch/ia64/include/asm/iommu.h b/arch/ia64/include/asm/iommu.h
index 0490794fe4a..745e095fe82 100644
--- a/arch/ia64/include/asm/iommu.h
+++ b/arch/ia64/include/asm/iommu.h
@@ -9,6 +9,11 @@ extern void pci_iommu_shutdown(void);
 extern void no_iommu_init(void);
 extern int force_iommu, no_iommu;
 extern int iommu_detected;
+#ifdef	CONFIG_DMAR
+extern int iommu_pass_through;
+#else
+#define iommu_pass_through	(0)
+#endif
 extern void iommu_dma_init(void);
 extern void machvec_init(const char *name);
 
diff --git a/arch/ia64/include/asm/mca.h b/arch/ia64/include/asm/mca.h
index 18a4321349a..44a0b53df90 100644
--- a/arch/ia64/include/asm/mca.h
+++ b/arch/ia64/include/asm/mca.h
@@ -72,39 +72,39 @@ typedef struct ia64_mc_info_s {
 struct ia64_sal_os_state {
 
 	/* SAL to OS */
-	u64			os_gp;			/* GP of the os registered with the SAL, physical */
-	u64			pal_proc;		/* PAL_PROC entry point, physical */
-	u64			sal_proc;		/* SAL_PROC entry point, physical */
-	u64			rv_rc;			/* MCA - Rendezvous state, INIT - reason code */
-	u64			proc_state_param;	/* from R18 */
-	u64			monarch;		/* 1 for a monarch event, 0 for a slave */
+	unsigned long		os_gp;			/* GP of the os registered with the SAL, physical */
+	unsigned long		pal_proc;		/* PAL_PROC entry point, physical */
+	unsigned long		sal_proc;		/* SAL_PROC entry point, physical */
+	unsigned long		rv_rc;			/* MCA - Rendezvous state, INIT - reason code */
+	unsigned long		proc_state_param;	/* from R18 */
+	unsigned long		monarch;		/* 1 for a monarch event, 0 for a slave */
 
 	/* common */
-	u64			sal_ra;			/* Return address in SAL, physical */
-	u64			sal_gp;			/* GP of the SAL - physical */
+	unsigned long		sal_ra;			/* Return address in SAL, physical */
+	unsigned long		sal_gp;			/* GP of the SAL - physical */
 	pal_min_state_area_t	*pal_min_state;		/* from R17.  physical in asm, virtual in C */
 	/* Previous values of IA64_KR(CURRENT) and IA64_KR(CURRENT_STACK).
 	 * Note: if the MCA/INIT recovery code wants to resume to a new context
 	 * then it must change these values to reflect the new kernel stack.
 	 */
-	u64			prev_IA64_KR_CURRENT;	/* previous value of IA64_KR(CURRENT) */
-	u64			prev_IA64_KR_CURRENT_STACK;
+	unsigned long		prev_IA64_KR_CURRENT;	/* previous value of IA64_KR(CURRENT) */
+	unsigned long		prev_IA64_KR_CURRENT_STACK;
 	struct task_struct	*prev_task;		/* previous task, NULL if it is not useful */
 	/* Some interrupt registers are not saved in minstate, pt_regs or
 	 * switch_stack.  Because MCA/INIT can occur when interrupts are
 	 * disabled, we need to save the additional interrupt registers over
 	 * MCA/INIT and resume.
 	 */
-	u64			isr;
-	u64			ifa;
-	u64			itir;
-	u64			iipa;
-	u64			iim;
-	u64			iha;
+	unsigned long		isr;
+	unsigned long		ifa;
+	unsigned long		itir;
+	unsigned long		iipa;
+	unsigned long		iim;
+	unsigned long		iha;
 
 	/* OS to SAL */
-	u64			os_status;		/* OS status to SAL, enum below */
-	u64			context;		/* 0 if return to same context
+	unsigned long		os_status;		/* OS status to SAL, enum below */
+	unsigned long		context;		/* 0 if return to same context
 							   1 if return to new context */
 };
 
@@ -150,7 +150,7 @@ extern void ia64_slave_init_handler(void);
 extern void ia64_mca_cmc_vector_setup(void);
 extern int  ia64_reg_MCA_extension(int (*fn)(void *, struct ia64_sal_os_state *));
 extern void ia64_unreg_MCA_extension(void);
-extern u64 ia64_get_rnat(u64 *);
+extern unsigned long ia64_get_rnat(unsigned long *);
 extern void ia64_mca_printk(const char * fmt, ...)
 	 __attribute__ ((format (printf, 1, 2)));
 
diff --git a/arch/ia64/include/asm/meminit.h b/arch/ia64/include/asm/meminit.h
index c0cea375620..688a812c017 100644
--- a/arch/ia64/include/asm/meminit.h
+++ b/arch/ia64/include/asm/meminit.h
@@ -25,8 +25,8 @@
 #define IA64_MAX_RSVD_REGIONS 9
 
 struct rsvd_region {
-	unsigned long start;	/* virtual address of beginning of element */
-	unsigned long end;	/* virtual address of end of element + 1 */
+	u64 start;	/* virtual address of beginning of element */
+	u64 end;	/* virtual address of end of element + 1 */
 };
 
 extern struct rsvd_region rsvd_region[IA64_MAX_RSVD_REGIONS + 1];
@@ -35,13 +35,13 @@ extern int num_rsvd_regions;
 extern void find_memory (void);
 extern void reserve_memory (void);
 extern void find_initrd (void);
-extern int filter_rsvd_memory (unsigned long start, unsigned long end, void *arg);
-extern int filter_memory (unsigned long start, unsigned long end, void *arg);
-extern unsigned long efi_memmap_init(unsigned long *s, unsigned long *e);
-extern int find_max_min_low_pfn (unsigned long , unsigned long, void *);
+extern int filter_rsvd_memory (u64 start, u64 end, void *arg);
+extern int filter_memory (u64 start, u64 end, void *arg);
+extern unsigned long efi_memmap_init(u64 *s, u64 *e);
+extern int find_max_min_low_pfn (u64, u64, void *);
 
 extern unsigned long vmcore_find_descriptor_size(unsigned long address);
-extern int reserve_elfcorehdr(unsigned long *start, unsigned long *end);
+extern int reserve_elfcorehdr(u64 *start, u64 *end);
 
 /*
  * For rounding an address to the next IA64_GRANULE_SIZE or order
@@ -63,8 +63,8 @@ extern int register_active_ranges(u64 start, u64 len, int nid);
 # define LARGE_GAP	0x40000000 /* Use virtual mem map if hole is > than this */
   extern unsigned long vmalloc_end;
   extern struct page *vmem_map;
-  extern int find_largest_hole (u64 start, u64 end, void *arg);
-  extern int create_mem_map_page_table (u64 start, u64 end, void *arg);
+  extern int find_largest_hole(u64 start, u64 end, void *arg);
+  extern int create_mem_map_page_table(u64 start, u64 end, void *arg);
   extern int vmemmap_find_next_valid_pfn(int, int);
 #else
 static inline int vmemmap_find_next_valid_pfn(int node, int i)
diff --git a/arch/ia64/include/asm/pal.h b/arch/ia64/include/asm/pal.h
index 67b02901ead..6a292505b39 100644
--- a/arch/ia64/include/asm/pal.h
+++ b/arch/ia64/include/asm/pal.h
@@ -989,8 +989,8 @@ ia64_pal_cache_read (pal_cache_line_id_u_t line_id, u64 physical_addr)
 }
 
 /* Return summary information about the hierarchy of caches controlled by the processor */
-static inline s64
-ia64_pal_cache_summary (u64 *cache_levels, u64 *unique_caches)
+static inline long ia64_pal_cache_summary(unsigned long *cache_levels,
+						unsigned long *unique_caches)
 {
 	struct ia64_pal_retval iprv;
 	PAL_CALL(iprv, PAL_CACHE_SUMMARY, 0, 0, 0);
@@ -1038,8 +1038,8 @@ ia64_pal_copy_pal (u64 target_addr, u64 alloc_size, u64 processor, u64 *pal_proc
 }
 
 /* Return the number of instruction and data debug register pairs */
-static inline s64
-ia64_pal_debug_info (u64 *inst_regs,  u64 *data_regs)
+static inline long ia64_pal_debug_info(unsigned long *inst_regs,
+						unsigned long *data_regs)
 {
 	struct ia64_pal_retval iprv;
 	PAL_CALL(iprv, PAL_DEBUG_INFO, 0, 0, 0);
@@ -1074,8 +1074,7 @@ ia64_pal_fixed_addr (u64 *global_unique_addr)
 }
 
 /* Get base frequency of the platform if generated by the processor */
-static inline s64
-ia64_pal_freq_base (u64 *platform_base_freq)
+static inline long ia64_pal_freq_base(unsigned long *platform_base_freq)
 {
 	struct ia64_pal_retval iprv;
 	PAL_CALL(iprv, PAL_FREQ_BASE, 0, 0, 0);
@@ -1437,7 +1436,7 @@ ia64_pal_proc_set_features (u64 feature_select)
  * possible.
  */
 typedef struct ia64_ptce_info_s {
-	u64		base;
+	unsigned long	base;
 	u32		count[2];
 	u32		stride[2];
 } ia64_ptce_info_t;
@@ -1478,9 +1477,9 @@ ia64_pal_register_info (u64 info_request, u64 *reg_info_1, u64 *reg_info_2)
 }
 
 typedef union pal_hints_u {
-	u64			ph_data;
+	unsigned long		ph_data;
 	struct {
-	       u64		si		: 1,
+	       unsigned long	si		: 1,
 				li		: 1,
 				reserved	: 62;
 	} pal_hints_s;
@@ -1489,8 +1488,8 @@ typedef union pal_hints_u {
 /* Return information about the register stack and RSE for this processor
  * implementation.
  */
-static inline s64
-ia64_pal_rse_info (u64 *num_phys_stacked, pal_hints_u_t *hints)
+static inline long ia64_pal_rse_info(unsigned long *num_phys_stacked,
+							pal_hints_u_t *hints)
 {
 	struct ia64_pal_retval iprv;
 	PAL_CALL(iprv, PAL_RSE_INFO, 0, 0, 0);
@@ -1608,8 +1607,7 @@ ia64_pal_vm_info (u64 tc_level, u64 tc_type,  pal_tc_info_u_t *tc_info, u64 *tc_
 /* Get page size information about the virtual memory characteristics of the processor
  * implementation.
  */
-static inline s64
-ia64_pal_vm_page_size (u64 *tr_pages, u64 *vw_pages)
+static inline s64 ia64_pal_vm_page_size(u64 *tr_pages, u64 *vw_pages)
 {
 	struct ia64_pal_retval iprv;
 	PAL_CALL(iprv, PAL_VM_PAGE_SIZE, 0, 0, 0);
diff --git a/arch/ia64/include/asm/pci.h b/arch/ia64/include/asm/pci.h
index 1d660d89db0..fcfca56bb85 100644
--- a/arch/ia64/include/asm/pci.h
+++ b/arch/ia64/include/asm/pci.h
@@ -135,19 +135,6 @@ extern void pcibios_resource_to_bus(struct pci_dev *dev,
 extern void pcibios_bus_to_resource(struct pci_dev *dev,
 		struct resource *res, struct pci_bus_region *region);
 
-static inline struct resource *
-pcibios_select_root(struct pci_dev *pdev, struct resource *res)
-{
-	struct resource *root = NULL;
-
-	if (res->flags & IORESOURCE_IO)
-		root = &ioport_resource;
-	if (res->flags & IORESOURCE_MEM)
-		root = &iomem_resource;
-
-	return root;
-}
-
 #define pcibios_scan_all_fns(a, b)	0
 
 #define HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ
diff --git a/arch/ia64/include/asm/processor.h b/arch/ia64/include/asm/processor.h
index f88fa054d01..3eaeedf1aef 100644
--- a/arch/ia64/include/asm/processor.h
+++ b/arch/ia64/include/asm/processor.h
@@ -187,40 +187,40 @@ union  ia64_rr {
  * state comes earlier:
  */
 struct cpuinfo_ia64 {
-	__u32 softirq_pending;
-	__u64 itm_delta;	/* # of clock cycles between clock ticks */
-	__u64 itm_next;		/* interval timer mask value to use for next clock tick */
-	__u64 nsec_per_cyc;	/* (1000000000<<IA64_NSEC_PER_CYC_SHIFT)/itc_freq */
-	__u64 unimpl_va_mask;	/* mask of unimplemented virtual address bits (from PAL) */
-	__u64 unimpl_pa_mask;	/* mask of unimplemented physical address bits (from PAL) */
-	__u64 itc_freq;		/* frequency of ITC counter */
-	__u64 proc_freq;	/* frequency of processor */
-	__u64 cyc_per_usec;	/* itc_freq/1000000 */
-	__u64 ptce_base;
-	__u32 ptce_count[2];
-	__u32 ptce_stride[2];
+	unsigned int softirq_pending;
+	unsigned long itm_delta;	/* # of clock cycles between clock ticks */
+	unsigned long itm_next;		/* interval timer mask value to use for next clock tick */
+	unsigned long nsec_per_cyc;	/* (1000000000<<IA64_NSEC_PER_CYC_SHIFT)/itc_freq */
+	unsigned long unimpl_va_mask;	/* mask of unimplemented virtual address bits (from PAL) */
+	unsigned long unimpl_pa_mask;	/* mask of unimplemented physical address bits (from PAL) */
+	unsigned long itc_freq;		/* frequency of ITC counter */
+	unsigned long proc_freq;	/* frequency of processor */
+	unsigned long cyc_per_usec;	/* itc_freq/1000000 */
+	unsigned long ptce_base;
+	unsigned int ptce_count[2];
+	unsigned int ptce_stride[2];
 	struct task_struct *ksoftirqd;	/* kernel softirq daemon for this CPU */
 
 #ifdef CONFIG_SMP
-	__u64 loops_per_jiffy;
+	unsigned long loops_per_jiffy;
 	int cpu;
-	__u32 socket_id;	/* physical processor socket id */
-	__u16 core_id;		/* core id */
-	__u16 thread_id;	/* thread id */
-	__u16 num_log;		/* Total number of logical processors on
+	unsigned int socket_id;	/* physical processor socket id */
+	unsigned short core_id;	/* core id */
+	unsigned short thread_id; /* thread id */
+	unsigned short num_log;	/* Total number of logical processors on
 				 * this socket that were successfully booted */
-	__u8  cores_per_socket;	/* Cores per processor socket */
-	__u8  threads_per_core;	/* Threads per core */
+	unsigned char cores_per_socket;	/* Cores per processor socket */
+	unsigned char threads_per_core;	/* Threads per core */
 #endif
 
 	/* CPUID-derived information: */
-	__u64 ppn;
-	__u64 features;
-	__u8 number;
-	__u8 revision;
-	__u8 model;
-	__u8 family;
-	__u8 archrev;
+	unsigned long ppn;
+	unsigned long features;
+	unsigned char number;
+	unsigned char revision;
+	unsigned char model;
+	unsigned char family;
+	unsigned char archrev;
 	char vendor[16];
 	char *model_name;
 
@@ -329,8 +329,8 @@ struct thread_struct {
 #else
 # define INIT_THREAD_PM
 #endif
-	__u64 dbr[IA64_NUM_DBG_REGS];
-	__u64 ibr[IA64_NUM_DBG_REGS];
+	unsigned long dbr[IA64_NUM_DBG_REGS];
+	unsigned long ibr[IA64_NUM_DBG_REGS];
 	struct ia64_fpreg fph[96];	/* saved/loaded on demand */
 };
 
diff --git a/arch/ia64/include/asm/sal.h b/arch/ia64/include/asm/sal.h
index 966797a97c9..d19ddba4e32 100644
--- a/arch/ia64/include/asm/sal.h
+++ b/arch/ia64/include/asm/sal.h
@@ -106,10 +106,10 @@ struct ia64_sal_retval {
 	 * informational value should be printed (e.g., "reboot for
 	 * change to take effect").
 	 */
-	s64 status;
-	u64 v0;
-	u64 v1;
-	u64 v2;
+	long status;
+	unsigned long v0;
+	unsigned long v1;
+	unsigned long v2;
 };
 
 typedef struct ia64_sal_retval (*ia64_sal_handler) (u64, ...);
diff --git a/arch/ia64/include/asm/sn/sn_sal.h b/arch/ia64/include/asm/sn/sn_sal.h
index e310fc0135d..1f5ff470a5a 100644
--- a/arch/ia64/include/asm/sn/sn_sal.h
+++ b/arch/ia64/include/asm/sn/sn_sal.h
@@ -929,7 +929,7 @@ ia64_sn_sysctl_tio_clock_reset(nasid_t nasid)
 /*
  * Get the associated ioboard type for a given nasid.
  */
-static inline s64
+static inline long
 ia64_sn_sysctl_ioboard_get(nasid_t nasid, u16 *ioboard)
 {
 	struct ia64_sal_retval isrv;
diff --git a/arch/ia64/include/asm/types.h b/arch/ia64/include/asm/types.h
index fbf1ed3b44c..bcd260e597d 100644
--- a/arch/ia64/include/asm/types.h
+++ b/arch/ia64/include/asm/types.h
@@ -2,10 +2,11 @@
 #define _ASM_IA64_TYPES_H
 
 /*
- * This file is never included by application software unless explicitly requested (e.g.,
- * via linux/types.h) in which case the application is Linux specific so (user-) name
- * space pollution is not a major issue.  However, for interoperability, libraries still
- * need to be careful to avoid a name clashes.
+ * This file is never included by application software unless explicitly
+ * requested (e.g., via linux/types.h) in which case the application is
+ * Linux specific so (user-) name space pollution is not a major issue.
+ * However, for interoperability, libraries still need to be careful to
+ * avoid naming clashes.
  *
  * Based on <asm-alpha/types.h>.
  *
@@ -13,7 +14,11 @@
  *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
  */
 
+#ifdef __KERNEL__
+#include <asm-generic/int-ll64.h>
+#else
 #include <asm-generic/int-l64.h>
+#endif
 
 #ifdef __ASSEMBLY__
 # define __IA64_UL(x)		(x)
diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h
index 10a9eb05f74..5a5347f5c4e 100644
--- a/arch/ia64/include/asm/unistd.h
+++ b/arch/ia64/include/asm/unistd.h
@@ -310,11 +310,12 @@
 #define __NR_inotify_init1		1318
 #define __NR_preadv			1319
 #define __NR_pwritev			1320
+#define __NR_rt_tgsigqueueinfo		1321
 
 #ifdef __KERNEL__
 
 
-#define NR_syscalls			297 /* length of syscall table */
+#define NR_syscalls			298 /* length of syscall table */
 
 /*
  * The following defines stop scripts/checksyscalls.sh from complaining about
@@ -328,6 +329,7 @@
 #define __IGNORE_utime		/* utimes() */
 #define __IGNORE_getpgrp	/* getpgid() */
 #define __IGNORE_vfork		/* clone() */
+#define __IGNORE_umount2	/* umount() */
 
 #define __ARCH_WANT_SYS_RT_SIGACTION
 #define __ARCH_WANT_SYS_RT_SIGSUSPEND
diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c
index 7ef80e8161c..c745d0aeb6e 100644
--- a/arch/ia64/kernel/efi.c
+++ b/arch/ia64/kernel/efi.c
@@ -46,7 +46,7 @@ extern efi_status_t efi_call_phys (void *, ...);
 struct efi efi;
 EXPORT_SYMBOL(efi);
 static efi_runtime_services_t *runtime;
-static unsigned long mem_limit = ~0UL, max_addr = ~0UL, min_addr = 0UL;
+static u64 mem_limit = ~0UL, max_addr = ~0UL, min_addr = 0UL;
 
 #define efi_call_virt(f, args...)	(*(f))(args)
 
@@ -356,7 +356,7 @@ efi_get_pal_addr (void)
 
 		if (++pal_code_count > 1) {
 			printk(KERN_ERR "Too many EFI Pal Code memory ranges, "
-			       "dropped @ %lx\n", md->phys_addr);
+			       "dropped @ %llx\n", md->phys_addr);
 			continue;
 		}
 		/*
@@ -490,10 +490,10 @@ efi_init (void)
 		}
 	}
 	if (min_addr != 0UL)
-		printk(KERN_INFO "Ignoring memory below %luMB\n",
+		printk(KERN_INFO "Ignoring memory below %lluMB\n",
 		       min_addr >> 20);
 	if (max_addr != ~0UL)
-		printk(KERN_INFO "Ignoring memory above %luMB\n",
+		printk(KERN_INFO "Ignoring memory above %lluMB\n",
 		       max_addr >> 20);
 
 	efi.systab = __va(ia64_boot_param->efi_systab);
@@ -1066,7 +1066,7 @@ find_memmap_space (void)
  * parts exist, and are WB.
  */
 unsigned long
-efi_memmap_init(unsigned long *s, unsigned long *e)
+efi_memmap_init(u64 *s, u64 *e)
 {
 	struct kern_memdesc *k, *prev = NULL;
 	u64	contig_low=0, contig_high=0;
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index 7bebac0e1d4..d0e7d37017b 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1805,6 +1805,7 @@ sys_call_table:
 	data8 sys_inotify_init1
 	data8 sys_preadv
 	data8 sys_pwritev			// 1320
+	data8 sys_rt_tgsigqueueinfo
 
 	.org sys_call_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls
 #endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c
index f92cef47bf8..c48b03f2b61 100644
--- a/arch/ia64/kernel/iosapic.c
+++ b/arch/ia64/kernel/iosapic.c
@@ -451,7 +451,7 @@ iosapic_startup_edge_irq (unsigned int irq)
 static void
 iosapic_ack_edge_irq (unsigned int irq)
 {
-	irq_desc_t *idesc = irq_desc + irq;
+	struct irq_desc *idesc = irq_desc + irq;
 
 	irq_complete_move(irq);
 	move_native_irq(irq);
@@ -600,8 +600,8 @@ static int
 register_intr (unsigned int gsi, int irq, unsigned char delivery,
 	       unsigned long polarity, unsigned long trigger)
 {
-	irq_desc_t *idesc;
-	struct hw_interrupt_type *irq_type;
+	struct irq_desc *idesc;
+	struct irq_chip *irq_type;
 	int index;
 	struct iosapic_rte_info *rte;
 
@@ -650,7 +650,7 @@ register_intr (unsigned int gsi, int irq, unsigned char delivery,
 
 	idesc = irq_desc + irq;
 	if (irq_type != NULL && idesc->chip != irq_type) {
-		if (idesc->chip != &no_irq_type)
+		if (idesc->chip != &no_irq_chip)
 			printk(KERN_WARNING
 			       "%s: changing vector %d from %s to %s\n",
 			       __func__, irq_to_vector(irq),
@@ -828,7 +828,7 @@ iosapic_unregister_intr (unsigned int gsi)
 {
 	unsigned long flags;
 	int irq, index;
-	irq_desc_t *idesc;
+	struct irq_desc *idesc;
 	u32 low32;
 	unsigned long trigger, polarity;
 	unsigned int dest;
diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c
index 7429752ef5a..7d8951229e7 100644
--- a/arch/ia64/kernel/irq.c
+++ b/arch/ia64/kernel/irq.c
@@ -130,7 +130,7 @@ unsigned int vectors_in_migration[NR_IRQS];
  */
 static void migrate_irqs(void)
 {
-	irq_desc_t *desc;
+	struct irq_desc *desc;
 	int 		irq, new_cpu;
 
 	for (irq=0; irq < NR_IRQS; irq++) {
diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c
index b448197728b..dd9d7b54f1a 100644
--- a/arch/ia64/kernel/irq_ia64.c
+++ b/arch/ia64/kernel/irq_ia64.c
@@ -630,7 +630,7 @@ static struct irqaction tlb_irqaction = {
 void
 ia64_native_register_percpu_irq (ia64_vector vec, struct irqaction *action)
 {
-	irq_desc_t *desc;
+	struct irq_desc *desc;
 	unsigned int irq;
 
 	irq = vec;
diff --git a/arch/ia64/kernel/irq_lsapic.c b/arch/ia64/kernel/irq_lsapic.c
index e56a7a36aca..fc1549d4564 100644
--- a/arch/ia64/kernel/irq_lsapic.c
+++ b/arch/ia64/kernel/irq_lsapic.c
@@ -33,7 +33,7 @@ static int lsapic_retrigger(unsigned int irq)
 	return 1;
 }
 
-struct hw_interrupt_type irq_type_ia64_lsapic = {
+struct irq_chip irq_type_ia64_lsapic = {
 	.name =		"LSAPIC",
 	.startup =	lsapic_noop_startup,
 	.shutdown =	lsapic_noop,
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index 5b17bd40227..7b30d21c519 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -850,7 +850,7 @@ EXPORT_SYMBOL(ia64_unreg_MCA_extension);
 
 
 static inline void
-copy_reg(const u64 *fr, u64 fnat, u64 *tr, u64 *tnat)
+copy_reg(const u64 *fr, u64 fnat, unsigned long *tr, unsigned long *tnat)
 {
 	u64 fslot, tslot, nat;
 	*tr = *fr;
@@ -914,9 +914,9 @@ ia64_mca_modify_original_stack(struct pt_regs *regs,
 	struct switch_stack *old_sw;
 	unsigned size = sizeof(struct pt_regs) +
 			sizeof(struct switch_stack) + 16;
-	u64 *old_bspstore, *old_bsp;
-	u64 *new_bspstore, *new_bsp;
-	u64 old_unat, old_rnat, new_rnat, nat;
+	unsigned long *old_bspstore, *old_bsp;
+	unsigned long *new_bspstore, *new_bsp;
+	unsigned long old_unat, old_rnat, new_rnat, nat;
 	u64 slots, loadrs = regs->loadrs;
 	u64 r12 = ms->pmsa_gr[12-1], r13 = ms->pmsa_gr[13-1];
 	u64 ar_bspstore = regs->ar_bspstore;
@@ -968,10 +968,10 @@ ia64_mca_modify_original_stack(struct pt_regs *regs,
 	 * loadrs for the new stack and save it in the new pt_regs, where
 	 * ia64_old_stack() can get it.
 	 */
-	old_bspstore = (u64 *)ar_bspstore;
-	old_bsp = (u64 *)ar_bsp;
+	old_bspstore = (unsigned long *)ar_bspstore;
+	old_bsp = (unsigned long *)ar_bsp;
 	slots = ia64_rse_num_regs(old_bspstore, old_bsp);
-	new_bspstore = (u64 *)((u64)current + IA64_RBS_OFFSET);
+	new_bspstore = (unsigned long *)((u64)current + IA64_RBS_OFFSET);
 	new_bsp = ia64_rse_skip_regs(new_bspstore, slots);
 	regs->loadrs = (new_bsp - new_bspstore) * 8 << 16;
 
@@ -1917,9 +1917,9 @@ ia64_mca_init(void)
 	ia64_fptr_t *init_hldlr_ptr_slave = (ia64_fptr_t *)ia64_os_init_dispatch_slave;
 	ia64_fptr_t *mca_hldlr_ptr = (ia64_fptr_t *)ia64_os_mca_dispatch;
 	int i;
-	s64 rc;
+	long rc;
 	struct ia64_sal_retval isrv;
-	u64 timeout = IA64_MCA_RENDEZ_TIMEOUT;	/* platform specific */
+	unsigned long timeout = IA64_MCA_RENDEZ_TIMEOUT; /* platform specific */
 	static struct notifier_block default_init_monarch_nb = {
 		.notifier_call = default_monarch_init_process,
 		.priority = 0/* we need to notified last */
@@ -2092,7 +2092,7 @@ ia64_mca_late_init(void)
 	cpe_poll_timer.function = ia64_mca_cpe_poll;
 
 	{
-		irq_desc_t *desc;
+		struct irq_desc *desc;
 		unsigned int irq;
 
 		if (cpe_vector >= 0) {
diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c
index da3b0cf495a..1481b0a28ca 100644
--- a/arch/ia64/kernel/module.c
+++ b/arch/ia64/kernel/module.c
@@ -171,7 +171,8 @@ apply_imm60 (struct module *mod, struct insn *insn, uint64_t val)
 		return 0;
 	}
 	if (val + ((uint64_t) 1 << 59) >= (1UL << 60)) {
-		printk(KERN_ERR "%s: value %ld out of IMM60 range\n", mod->name, (int64_t) val);
+		printk(KERN_ERR "%s: value %ld out of IMM60 range\n",
+			mod->name, (long) val);
 		return 0;
 	}
 	ia64_patch_imm60((u64) insn, val);
@@ -182,7 +183,8 @@ static int
 apply_imm22 (struct module *mod, struct insn *insn, uint64_t val)
 {
 	if (val + (1 << 21) >= (1 << 22)) {
-		printk(KERN_ERR "%s: value %li out of IMM22 range\n", mod->name, (int64_t)val);
+		printk(KERN_ERR "%s: value %li out of IMM22 range\n",
+			mod->name, (long)val);
 		return 0;
 	}
 	ia64_patch((u64) insn, 0x01fffcfe000UL, (  ((val & 0x200000UL) << 15) /* bit 21 -> 36 */
@@ -196,7 +198,8 @@ static int
 apply_imm21b (struct module *mod, struct insn *insn, uint64_t val)
 {
 	if (val + (1 << 20) >= (1 << 21)) {
-		printk(KERN_ERR "%s: value %li out of IMM21b range\n", mod->name, (int64_t)val);
+		printk(KERN_ERR "%s: value %li out of IMM21b range\n",
+			mod->name, (long)val);
 		return 0;
 	}
 	ia64_patch((u64) insn, 0x11ffffe000UL, (  ((val & 0x100000UL) << 16) /* bit 20 -> 36 */
@@ -701,8 +704,9 @@ do_reloc (struct module *mod, uint8_t r_type, Elf64_Sym *sym, uint64_t addend,
 	      case RV_PCREL2:
 		if (r_type == R_IA64_PCREL21BI) {
 			if (!is_internal(mod, val)) {
-				printk(KERN_ERR "%s: %s reloc against non-local symbol (%lx)\n",
-				       __func__, reloc_name[r_type], val);
+				printk(KERN_ERR "%s: %s reloc against "
+					"non-local symbol (%lx)\n", __func__,
+					reloc_name[r_type], (unsigned long)val);
 				return -ENOEXEC;
 			}
 			format = RF_INSN21B;
diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c
index 0f8ade9331b..6c892285604 100644
--- a/arch/ia64/kernel/msi_ia64.c
+++ b/arch/ia64/kernel/msi_ia64.c
@@ -158,7 +158,7 @@ static int dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
 }
 #endif /* CONFIG_SMP */
 
-struct irq_chip dmar_msi_type = {
+static struct irq_chip dmar_msi_type = {
 	.name = "DMAR_MSI",
 	.unmask = dmar_msi_unmask,
 	.mask = dmar_msi_mask,
diff --git a/arch/ia64/kernel/palinfo.c b/arch/ia64/kernel/palinfo.c
index a4f19c70aad..fdf6f9d013e 100644
--- a/arch/ia64/kernel/palinfo.c
+++ b/arch/ia64/kernel/palinfo.c
@@ -218,10 +218,10 @@ static int
 cache_info(char *page)
 {
 	char *p = page;
-	u64 i, levels, unique_caches;
+	unsigned long i, levels, unique_caches;
 	pal_cache_config_info_t cci;
 	int j, k;
-	s64 status;
+	long status;
 
 	if ((status = ia64_pal_cache_summary(&levels, &unique_caches)) != 0) {
 		printk(KERN_ERR "ia64_pal_cache_summary=%ld\n", status);
@@ -303,7 +303,7 @@ vm_info(char *page)
 	ia64_ptce_info_t ptce;
 	const char *sep;
 	int i, j;
-	s64 status;
+	long status;
 
 	if ((status = ia64_pal_vm_summary(&vm_info_1, &vm_info_2)) !=0) {
 		printk(KERN_ERR "ia64_pal_vm_summary=%ld\n", status);
@@ -431,9 +431,9 @@ register_info(char *page)
 	char *p = page;
 	u64 reg_info[2];
 	u64 info;
-	u64 phys_stacked;
+	unsigned long phys_stacked;
 	pal_hints_u_t hints;
-	u64 iregs, dregs;
+	unsigned long iregs, dregs;
 	char *info_type[]={
 		"Implemented AR(s)",
 		"AR(s) with read side-effects",
@@ -530,8 +530,8 @@ static char **proc_features[]={
 	NULL, NULL, NULL, NULL,
 };
 
-static char *
-feature_set_info(char *page, u64 avail, u64 status, u64 control, u64 set)
+static char * feature_set_info(char *page, u64 avail, u64 status, u64 control,
+							unsigned long set)
 {
 	char *p = page;
 	char **vf, **v;
@@ -714,7 +714,7 @@ frequency_info(char *page)
 {
 	char *p = page;
 	struct pal_freq_ratio proc, itc, bus;
-	u64 base;
+	unsigned long base;
 
 	if (ia64_pal_freq_base(&base) == -1)
 		p += sprintf(p, "Output clock            : not implemented\n");
@@ -736,43 +736,43 @@ static int
 tr_info(char *page)
 {
 	char *p = page;
-	s64 status;
+	long status;
 	pal_tr_valid_u_t tr_valid;
 	u64 tr_buffer[4];
 	pal_vm_info_1_u_t vm_info_1;
 	pal_vm_info_2_u_t vm_info_2;
-	u64 i, j;
-	u64 max[3], pgm;
+	unsigned long i, j;
+	unsigned long max[3], pgm;
 	struct ifa_reg {
-		u64 valid:1;
-		u64 ig:11;
-		u64 vpn:52;
+		unsigned long valid:1;
+		unsigned long ig:11;
+		unsigned long vpn:52;
 	} *ifa_reg;
 	struct itir_reg {
-		u64 rv1:2;
-		u64 ps:6;
-		u64 key:24;
-		u64 rv2:32;
+		unsigned long rv1:2;
+		unsigned long ps:6;
+		unsigned long key:24;
+		unsigned long rv2:32;
 	} *itir_reg;
 	struct gr_reg {
-		u64 p:1;
-		u64 rv1:1;
-		u64 ma:3;
-		u64 a:1;
-		u64 d:1;
-		u64 pl:2;
-		u64 ar:3;
-		u64 ppn:38;
-		u64 rv2:2;
-		u64 ed:1;
-		u64 ig:11;
+		unsigned long p:1;
+		unsigned long rv1:1;
+		unsigned long ma:3;
+		unsigned long a:1;
+		unsigned long d:1;
+		unsigned long pl:2;
+		unsigned long ar:3;
+		unsigned long ppn:38;
+		unsigned long rv2:2;
+		unsigned long ed:1;
+		unsigned long ig:11;
 	} *gr_reg;
 	struct rid_reg {
-		u64 ig1:1;
-		u64 rv1:1;
-		u64 ig2:6;
-		u64 rid:24;
-		u64 rv2:32;
+		unsigned long ig1:1;
+		unsigned long rv1:1;
+		unsigned long ig2:6;
+		unsigned long rid:24;
+		unsigned long rv2:32;
 	} *rid_reg;
 
 	if ((status = ia64_pal_vm_summary(&vm_info_1, &vm_info_2)) !=0) {
diff --git a/arch/ia64/kernel/paravirt_patchlist.c b/arch/ia64/kernel/paravirt_patchlist.c
index b28082a95d4..0a70720662e 100644
--- a/arch/ia64/kernel/paravirt_patchlist.c
+++ b/arch/ia64/kernel/paravirt_patchlist.c
@@ -19,6 +19,8 @@
  */
 
 #include <linux/bug.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
 #include <asm/paravirt.h>
 
 #define DECLARE(name)						\
diff --git a/arch/ia64/kernel/pci-dma.c b/arch/ia64/kernel/pci-dma.c
index eb987386f69..05695962fe4 100644
--- a/arch/ia64/kernel/pci-dma.c
+++ b/arch/ia64/kernel/pci-dma.c
@@ -32,6 +32,8 @@ int force_iommu __read_mostly = 1;
 int force_iommu __read_mostly;
 #endif
 
+int iommu_pass_through;
+
 /* Dummy device used for NULL arguments (normally ISA). Better would
    be probably a smaller DMA mask, but this is bug-to-bug compatible
    to i386. */
@@ -91,7 +93,7 @@ int iommu_dma_supported(struct device *dev, u64 mask)
 	   type. Normally this doesn't make any difference, but gives
 	   more gentle handling of IOMMU overflow. */
 	if (iommu_sac_force && (mask >= DMA_BIT_MASK(40))) {
-		dev_info(dev, "Force SAC with mask %lx\n", mask);
+		dev_info(dev, "Force SAC with mask %llx\n", mask);
 		return 0;
 	}
 
diff --git a/arch/ia64/kernel/pci-swiotlb.c b/arch/ia64/kernel/pci-swiotlb.c
index 285aae8431c..223abb13410 100644
--- a/arch/ia64/kernel/pci-swiotlb.c
+++ b/arch/ia64/kernel/pci-swiotlb.c
@@ -46,7 +46,7 @@ void __init swiotlb_dma_init(void)
 
 void __init pci_swiotlb_init(void)
 {
-	if (!iommu_detected) {
+	if (!iommu_detected || iommu_pass_through) {
 #ifdef CONFIG_IA64_GENERIC
 		swiotlb = 1;
 		printk(KERN_INFO "PCI-DMA: Re-initialize machine vector.\n");
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index bdc176cb5e8..abce2468a40 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -312,7 +312,7 @@ typedef struct pfm_context {
 	unsigned long		th_pmcs[PFM_NUM_PMC_REGS];	/* PMC thread save state */
 	unsigned long		th_pmds[PFM_NUM_PMD_REGS];	/* PMD thread save state */
 
-	u64			ctx_saved_psr_up;	/* only contains psr.up value */
+	unsigned long		ctx_saved_psr_up;	/* only contains psr.up value */
 
 	unsigned long		ctx_last_activation;	/* context last activation number for last_cpu */
 	unsigned int		ctx_last_cpu;		/* CPU id of current or last CPU used (SMP only) */
@@ -5213,8 +5213,8 @@ pfm_end_notify_user(pfm_context_t *ctx)
  * main overflow processing routine.
  * it can be called from the interrupt path or explicitly during the context switch code
  */
-static void
-pfm_overflow_handler(struct task_struct *task, pfm_context_t *ctx, u64 pmc0, struct pt_regs *regs)
+static void pfm_overflow_handler(struct task_struct *task, pfm_context_t *ctx,
+				unsigned long pmc0, struct pt_regs *regs)
 {
 	pfm_ovfl_arg_t *ovfl_arg;
 	unsigned long mask;
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 714066aeda7..1b23ec126b6 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -151,9 +151,9 @@ int num_rsvd_regions __initdata;
  * This routine does not assume the incoming segments are sorted.
  */
 int __init
-filter_rsvd_memory (unsigned long start, unsigned long end, void *arg)
+filter_rsvd_memory (u64 start, u64 end, void *arg)
 {
-	unsigned long range_start, range_end, prev_start;
+	u64 range_start, range_end, prev_start;
 	void (*func)(unsigned long, unsigned long, int);
 	int i;
 
@@ -191,7 +191,7 @@ filter_rsvd_memory (unsigned long start, unsigned long end, void *arg)
  * are not filtered out.
  */
 int __init
-filter_memory(unsigned long start, unsigned long end, void *arg)
+filter_memory(u64 start, u64 end, void *arg)
 {
 	void (*func)(unsigned long, unsigned long, int);
 
@@ -397,7 +397,7 @@ find_initrd (void)
 		initrd_start = (unsigned long)__va(ia64_boot_param->initrd_start);
 		initrd_end   = initrd_start+ia64_boot_param->initrd_size;
 
-		printk(KERN_INFO "Initial ramdisk at: 0x%lx (%lu bytes)\n",
+		printk(KERN_INFO "Initial ramdisk at: 0x%lx (%llu bytes)\n",
 		       initrd_start, ia64_boot_param->initrd_size);
 	}
 #endif
@@ -505,9 +505,9 @@ static int __init parse_elfcorehdr(char *arg)
 }
 early_param("elfcorehdr", parse_elfcorehdr);
 
-int __init reserve_elfcorehdr(unsigned long *start, unsigned long *end)
+int __init reserve_elfcorehdr(u64 *start, u64 *end)
 {
-	unsigned long length;
+	u64 length;
 
 	/* We get the address using the kernel command line,
 	 * but the size is extracted from the EFI tables.
@@ -588,7 +588,7 @@ setup_arch (char **cmdline_p)
 	ia64_patch_rse((u64) __start___rse_patchlist, (u64) __end___rse_patchlist);
 #else
 	{
-		u64 num_phys_stacked;
+		unsigned long num_phys_stacked;
 
 		if (ia64_pal_rse_info(&num_phys_stacked, 0) == 0 && num_phys_stacked > 96)
 			ia64_patch_rse((u64) __start___rse_patchlist, (u64) __end___rse_patchlist);
@@ -872,9 +872,9 @@ static void __cpuinit
 get_cache_info(void)
 {
 	unsigned long line_size, max = 1;
-	u64 l, levels, unique_caches;
-        pal_cache_config_info_t cci;
-        s64 status;
+	unsigned long l, levels, unique_caches;
+	pal_cache_config_info_t cci;
+	long status;
 
         status = ia64_pal_cache_summary(&levels, &unique_caches);
         if (status != 0) {
@@ -892,9 +892,9 @@ get_cache_info(void)
 		/* cache_type (data_or_unified)=2 */
 		status = ia64_pal_cache_config_info(l, 2, &cci);
 		if (status != 0) {
-			printk(KERN_ERR
-			       "%s: ia64_pal_cache_config_info(l=%lu, 2) failed (status=%ld)\n",
-			       __func__, l, status);
+			printk(KERN_ERR "%s: ia64_pal_cache_config_info"
+				"(l=%lu, 2) failed (status=%ld)\n",
+				__func__, l, status);
 			max = SMP_CACHE_BYTES;
 			/* The safest setup for "flush_icache_range()" */
 			cci.pcci_stride = I_CACHE_STRIDE_SHIFT;
@@ -914,10 +914,10 @@ get_cache_info(void)
 			/* cache_type (instruction)=1*/
 			status = ia64_pal_cache_config_info(l, 1, &cci);
 			if (status != 0) {
-				printk(KERN_ERR
-				"%s: ia64_pal_cache_config_info(l=%lu, 1) failed (status=%ld)\n",
+				printk(KERN_ERR "%s: ia64_pal_cache_config_info"
+					"(l=%lu, 1) failed (status=%ld)\n",
 					__func__, l, status);
-				/* The safest setup for "flush_icache_range()" */
+				/* The safest setup for flush_icache_range() */
 				cci.pcci_stride = I_CACHE_STRIDE_SHIFT;
 			}
 		}
diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c
index 5230eaafd83..f0c521b0ba4 100644
--- a/arch/ia64/kernel/smp.c
+++ b/arch/ia64/kernel/smp.c
@@ -66,7 +66,7 @@ static DEFINE_PER_CPU(unsigned short, shadow_flush_counts[NR_CPUS]) ____cachelin
 #define IPI_KDUMP_CPU_STOP	3
 
 /* This needs to be cacheline aligned because it is written to by *other* CPUs.  */
-static DEFINE_PER_CPU_SHARED_ALIGNED(u64, ipi_operation);
+static DEFINE_PER_CPU_SHARED_ALIGNED(unsigned long, ipi_operation);
 
 extern void cpu_halt (void);
 
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index 7700e23034b..de100aa7ff0 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -678,7 +678,7 @@ extern void fixup_irqs(void);
 int migrate_platform_irqs(unsigned int cpu)
 {
 	int new_cpei_cpu;
-	irq_desc_t *desc = NULL;
+	struct irq_desc *desc = NULL;
 	const struct cpumask *mask;
 	int 		retval = 0;
 
@@ -865,7 +865,7 @@ init_smp_config(void)
 void __devinit
 identify_siblings(struct cpuinfo_ia64 *c)
 {
-	s64 status;
+	long status;
 	u16 pltid;
 	pal_logical_to_physical_t info;
 
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 604c1a35db3..4990495d753 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -385,7 +385,7 @@ ia64_init_itm (void)
 
 static cycle_t itc_get_cycles(struct clocksource *cs)
 {
-	u64 lcycle, now, ret;
+	unsigned long lcycle, now, ret;
 
 	if (!itc_jitter_data.itc_jitter)
 		return get_cycles();
diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c
index a8d61a3e9a9..bc80dff1df7 100644
--- a/arch/ia64/kernel/topology.c
+++ b/arch/ia64/kernel/topology.c
@@ -306,10 +306,10 @@ static void __cpuinit cpu_cache_sysfs_exit(unsigned int cpu)
 
 static int __cpuinit cpu_cache_sysfs_init(unsigned int cpu)
 {
-	u64 i, levels, unique_caches;
+	unsigned long i, levels, unique_caches;
 	pal_cache_config_info_t cci;
 	int j;
-	s64 status;
+	long status;
 	struct cache_info *this_cache;
 	int num_cache_leaves = 0;
 
diff --git a/arch/ia64/kernel/uncached.c b/arch/ia64/kernel/uncached.c
index 6ba72ab42fc..a595823582d 100644
--- a/arch/ia64/kernel/uncached.c
+++ b/arch/ia64/kernel/uncached.c
@@ -250,8 +250,7 @@ EXPORT_SYMBOL(uncached_free_page);
  * Called at boot time to build a map of pages that can be used for
  * memory special operations.
  */
-static int __init uncached_build_memmap(unsigned long uc_start,
-					unsigned long uc_end, void *arg)
+static int __init uncached_build_memmap(u64 uc_start, u64 uc_end, void *arg)
 {
 	int nid = paddr_to_nid(uc_start - __IA64_UNCACHED_OFFSET);
 	struct gen_pool *pool = uncached_pools[nid].pool;
diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c
index 0ee085efbe2..2f724d2bf29 100644
--- a/arch/ia64/mm/contig.c
+++ b/arch/ia64/mm/contig.c
@@ -107,10 +107,10 @@ unsigned long bootmap_start;
  * bootmap_start.  This address must be page-aligned.
  */
 static int __init
-find_bootmap_location (unsigned long start, unsigned long end, void *arg)
+find_bootmap_location (u64 start, u64 end, void *arg)
 {
-	unsigned long needed = *(unsigned long *)arg;
-	unsigned long range_start, range_end, free_start;
+	u64 needed = *(unsigned long *)arg;
+	u64 range_start, range_end, free_start;
 	int i;
 
 #if IGNORE_PFN0
@@ -229,8 +229,7 @@ find_memory (void)
 	alloc_per_cpu_data();
 }
 
-static int
-count_pages (u64 start, u64 end, void *arg)
+static int count_pages(u64 start, u64 end, void *arg)
 {
 	unsigned long *count = arg;
 
diff --git a/arch/ia64/mm/fault.c b/arch/ia64/mm/fault.c
index 23088bed111..19261a99e62 100644
--- a/arch/ia64/mm/fault.c
+++ b/arch/ia64/mm/fault.c
@@ -154,7 +154,7 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re
 	 * sure we exit gracefully rather than endlessly redo the
 	 * fault.
 	 */
-	fault = handle_mm_fault(mm, vma, address, (mask & VM_WRITE) != 0);
+	fault = handle_mm_fault(mm, vma, address, (mask & VM_WRITE) ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		/*
 		 * We ran out of memory, or some other thing happened
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index c0f3bee6904..b115b3bbf04 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -422,8 +422,7 @@ retry_pte:
 	return hole_next_pfn - pgdat->node_start_pfn;
 }
 
-int __init
-create_mem_map_page_table (u64 start, u64 end, void *arg)
+int __init create_mem_map_page_table(u64 start, u64 end, void *arg)
 {
 	unsigned long address, start_page, end_page;
 	struct page *map_start, *map_end;
@@ -469,7 +468,7 @@ struct memmap_init_callback_data {
 };
 
 static int __meminit
-virtual_memmap_init (u64 start, u64 end, void *arg)
+virtual_memmap_init(u64 start, u64 end, void *arg)
 {
 	struct memmap_init_callback_data *args;
 	struct page *map_start, *map_end;
@@ -531,8 +530,7 @@ ia64_pfn_valid (unsigned long pfn)
 }
 EXPORT_SYMBOL(ia64_pfn_valid);
 
-int __init
-find_largest_hole (u64 start, u64 end, void *arg)
+int __init find_largest_hole(u64 start, u64 end, void *arg)
 {
 	u64 *max_gap = arg;
 
@@ -548,8 +546,7 @@ find_largest_hole (u64 start, u64 end, void *arg)
 
 #endif /* CONFIG_VIRTUAL_MEM_MAP */
 
-int __init
-register_active_ranges(u64 start, u64 len, int nid)
+int __init register_active_ranges(u64 start, u64 len, int nid)
 {
 	u64 end = start + len;
 
@@ -567,7 +564,7 @@ register_active_ranges(u64 start, u64 len, int nid)
 }
 
 static int __init
-count_reserved_pages (u64 start, u64 end, void *arg)
+count_reserved_pages(u64 start, u64 end, void *arg)
 {
 	unsigned long num_reserved = 0;
 	unsigned long *count = arg;
@@ -580,7 +577,7 @@ count_reserved_pages (u64 start, u64 end, void *arg)
 }
 
 int
-find_max_min_low_pfn (unsigned long start, unsigned long end, void *arg)
+find_max_min_low_pfn (u64 start, u64 end, void *arg)
 {
 	unsigned long pfn_start, pfn_end;
 #ifdef CONFIG_FLATMEM
diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c
index b9f3d7bbb33..f426dc78d95 100644
--- a/arch/ia64/mm/tlb.c
+++ b/arch/ia64/mm/tlb.c
@@ -34,7 +34,7 @@
 #include <asm/tlb.h>
 
 static struct {
-	unsigned long mask;	/* mask of supported purge page-sizes */
+	u64 mask;		/* mask of supported purge page-sizes */
 	unsigned long max_bits;	/* log2 of largest supported purge page-size */
 } purge;
 
@@ -328,7 +328,7 @@ void __devinit
 ia64_tlb_init (void)
 {
 	ia64_ptce_info_t uninitialized_var(ptce_info); /* GCC be quiet */
-	unsigned long tr_pgbits;
+	u64 tr_pgbits;
 	long status;
 	pal_vm_info_1_u_t vm_info_1;
 	pal_vm_info_2_u_t vm_info_2;
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 61f1af5c23c..729298f4b23 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -163,7 +163,7 @@ add_io_space (struct pci_root_info *info, struct acpi_resource_address64 *addr)
 {
 	struct resource *resource;
 	char *name;
-	u64 base, min, max, base_port;
+	unsigned long base, min, max, base_port;
 	unsigned int sparse = 0, space_nr, len;
 
 	resource = kzalloc(sizeof(*resource), GFP_KERNEL);
@@ -292,7 +292,7 @@ static __devinit acpi_status add_window(struct acpi_resource *res, void *data)
 	window->offset = offset;
 
 	if (insert_resource(root, &window->resource)) {
-		printk(KERN_ERR "alloc 0x%lx-0x%lx from %s for %s failed\n",
+		printk(KERN_ERR "alloc 0x%llx-0x%llx from %s for %s failed\n",
 			window->resource.start, window->resource.end,
 			root->name, info->name);
 	}
@@ -314,8 +314,8 @@ pcibios_setup_root_windows(struct pci_bus *bus, struct pci_controller *ctrl)
 		    (res->end - res->start < 16))
 			continue;
 		if (j >= PCI_BUS_NUM_RESOURCES) {
-			printk("Ignoring range [%lx-%lx] (%lx)\n", res->start,
-					res->end, res->flags);
+			printk("Ignoring range [%#llx-%#llx] (%lx)\n",
+					res->start, res->end, res->flags);
 			continue;
 		}
 		bus->resource[j++] = res;
@@ -371,8 +371,6 @@ pci_acpi_scan_root(struct acpi_device *device, int domain, int bus)
 	 * such quirk. So we just ignore the case now.
 	 */
 	pbus = pci_scan_bus_parented(NULL, bus, &pci_root_ops, controller);
-	if (pbus)
-		pcibios_setup_root_windows(pbus, controller);
 
 	return pbus;
 
@@ -490,6 +488,8 @@ pcibios_fixup_bus (struct pci_bus *b)
 	if (b->self) {
 		pci_read_bridge_bases(b);
 		pcibios_fixup_bridge_resources(b->self);
+	} else {
+		pcibios_setup_root_windows(b, b->sysdata);
 	}
 	list_for_each_entry(dev, &b->devices, bus_list)
 		pcibios_fixup_device_resources(dev);
@@ -728,8 +728,8 @@ extern u8 pci_cache_line_size;
  */
 static void __init set_pci_cacheline_size(void)
 {
-	u64 levels, unique_caches;
-	s64 status;
+	unsigned long levels, unique_caches;
+	long status;
 	pal_cache_config_info_t cci;
 
 	status = ia64_pal_cache_summary(&levels, &unique_caches);
diff --git a/arch/ia64/sn/kernel/io_acpi_init.c b/arch/ia64/sn/kernel/io_acpi_init.c
index d0223abbbbd..fd50ff94302 100644
--- a/arch/ia64/sn/kernel/io_acpi_init.c
+++ b/arch/ia64/sn/kernel/io_acpi_init.c
@@ -40,7 +40,7 @@ struct sn_pcidev_match {
 /*
  * Perform the early IO init in PROM.
  */
-static s64
+static long
 sal_ioif_init(u64 *result)
 {
 	struct ia64_sal_retval isrv = {0,0,0,0};
@@ -492,7 +492,7 @@ void __init
 sn_io_acpi_init(void)
 {
 	u64 result;
-	s64 status;
+	long status;
 
 	/* SN Altix does not follow the IOSAPIC IRQ routing model */
 	acpi_irq_model = ACPI_IRQ_MODEL_PLATFORM;
diff --git a/arch/ia64/sn/kernel/io_common.c b/arch/ia64/sn/kernel/io_common.c
index 57f280dd9de..76645cf6ac5 100644
--- a/arch/ia64/sn/kernel/io_common.c
+++ b/arch/ia64/sn/kernel/io_common.c
@@ -342,7 +342,7 @@ sn_common_bus_fixup(struct pci_bus *bus,
 		struct pcibus_bussoft *b = SN_PCIBUS_BUSSOFT(bus);
 
 		printk(KERN_WARNING "Device ASIC=%u XID=%u PBUSNUM=%u "
-		       "L_IO=%lx L_MEM=%lx BASE=%lx\n",
+		       "L_IO=%llx L_MEM=%llx BASE=%llx\n",
 		       b->bs_asic_type, b->bs_xid, b->bs_persist_busnum,
 		       b->bs_legacy_io, b->bs_legacy_mem, b->bs_base);
 		printk(KERN_WARNING "on node %d but only %d nodes online."
diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c
index 764f26abac0..40d6eeda1c4 100644
--- a/arch/ia64/sn/kernel/irq.c
+++ b/arch/ia64/sn/kernel/irq.c
@@ -295,13 +295,13 @@ unsigned int sn_local_vector_to_irq(u8 vector)
 void sn_irq_init(void)
 {
 	int i;
-	irq_desc_t *base_desc = irq_desc;
+	struct irq_desc *base_desc = irq_desc;
 
 	ia64_first_device_vector = IA64_SN2_FIRST_DEVICE_VECTOR;
 	ia64_last_device_vector = IA64_SN2_LAST_DEVICE_VECTOR;
 
 	for (i = 0; i < NR_IRQS; i++) {
-		if (base_desc[i].chip == &no_irq_type) {
+		if (base_desc[i].chip == &no_irq_chip) {
 			base_desc[i].chip = &irq_type_sn;
 		}
 	}
@@ -377,7 +377,7 @@ void sn_irq_fixup(struct pci_dev *pci_dev, struct sn_irq_info *sn_irq_info)
 	int cpu = nasid_slice_to_cpuid(nasid, slice);
 #ifdef CONFIG_SMP
 	int cpuphys;
-	irq_desc_t *desc;
+	struct irq_desc *desc;
 #endif
 
 	pci_dev_get(pci_dev);
diff --git a/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
index 9e6491cf72b..4c7e7479095 100644
--- a/arch/ia64/sn/kernel/sn2/sn_hwperf.c
+++ b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
@@ -414,7 +414,7 @@ static int sn_topology_show(struct seq_file *s, void *d)
 		}
 		seq_printf(s, "partition %u %s local "
 			"shubtype %s, "
-			"nasid_mask 0x%016lx, "
+			"nasid_mask 0x%016llx, "
 			"nasid_bits %d:%d, "
 			"system_size %d, "
 			"sharing_size %d, "
@@ -683,7 +683,7 @@ static int sn_hwperf_map_err(int hwperf_err)
  * ioctl for "sn_hwperf" misc device
  */
 static int
-sn_hwperf_ioctl(struct inode *in, struct file *fp, u32 op, u64 arg)
+sn_hwperf_ioctl(struct inode *in, struct file *fp, u32 op, unsigned long arg)
 {
 	struct sn_hwperf_ioctl_args a;
 	struct cpuinfo_ia64 *cdata;
diff --git a/arch/ia64/sn/kernel/sn2/sn_proc_fs.c b/arch/ia64/sn/kernel/sn2/sn_proc_fs.c
index 2526e5c783a..c76d8dc3aea 100644
--- a/arch/ia64/sn/kernel/sn2/sn_proc_fs.c
+++ b/arch/ia64/sn/kernel/sn2/sn_proc_fs.c
@@ -36,7 +36,7 @@ static int system_serial_number_open(struct inode *inode, struct file *file)
 
 static int licenseID_show(struct seq_file *s, void *p)
 {
-	seq_printf(s, "0x%lx\n", sn_partition_serial_number_val());
+	seq_printf(s, "0x%llx\n", sn_partition_serial_number_val());
 	return 0;
 }
 
diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c
index 3f864238566..c1bd1cfda32 100644
--- a/arch/ia64/sn/kernel/tiocx.c
+++ b/arch/ia64/sn/kernel/tiocx.c
@@ -368,7 +368,7 @@ static void tio_corelet_reset(nasid_t nasid, int corelet)
 static int is_fpga_tio(int nasid, int *bt)
 {
 	u16 uninitialized_var(ioboard_type);	/* GCC be quiet */
-	s64 rc;
+	long rc;
 
 	rc = ia64_sn_sysctl_ioboard_get(nasid, &ioboard_type);
 	if (rc) {
diff --git a/arch/ia64/sn/pci/pcibr/pcibr_provider.c b/arch/ia64/sn/pci/pcibr/pcibr_provider.c
index 2c676cc0541..d13e5a22a55 100644
--- a/arch/ia64/sn/pci/pcibr/pcibr_provider.c
+++ b/arch/ia64/sn/pci/pcibr/pcibr_provider.c
@@ -79,7 +79,7 @@ static int sal_pcibr_error_interrupt(struct pcibus_info *soft)
 
 u16 sn_ioboard_to_pci_bus(struct pci_bus *pci_bus)
 {
-	s64 rc;
+	long rc;
 	u16 uninitialized_var(ioboard);		/* GCC be quiet */
 	nasid_t nasid = NASID_GET(SN_PCIBUS_BUSSOFT(pci_bus)->bs_base);
 
diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c
index 79165122501..35b2a27d2e7 100644
--- a/arch/ia64/sn/pci/tioca_provider.c
+++ b/arch/ia64/sn/pci/tioca_provider.c
@@ -123,7 +123,7 @@ tioca_gart_init(struct tioca_kernel *tioca_kern)
 
 	if (!tmp) {
 		printk(KERN_ERR "%s:  Could not allocate "
-		       "%lu bytes (order %d) for GART\n",
+		       "%llu bytes (order %d) for GART\n",
 		       __func__,
 		       tioca_kern->ca_gart_size,
 		       get_order(tioca_kern->ca_gart_size));
@@ -348,7 +348,7 @@ tioca_dma_d48(struct pci_dev *pdev, u64 paddr)
 	agp_dma_extn = __sn_readq_relaxed(&ca_base->ca_agp_dma_addr_extn);
 	if (node_upper != (agp_dma_extn >> CA_AGP_DMA_NODE_ID_SHFT)) {
 		printk(KERN_ERR "%s:  coretalk upper node (%u) "
-		       "mismatch with ca_agp_dma_addr_extn (%lu)\n",
+		       "mismatch with ca_agp_dma_addr_extn (%llu)\n",
 		       __func__,
 		       node_upper, (agp_dma_extn >> CA_AGP_DMA_NODE_ID_SHFT));
 		return 0;
@@ -367,7 +367,7 @@ tioca_dma_d48(struct pci_dev *pdev, u64 paddr)
  * dma_addr_t is guaranteed to be contiguous in CA bus space.
  */
 static dma_addr_t
-tioca_dma_mapped(struct pci_dev *pdev, u64 paddr, size_t req_size)
+tioca_dma_mapped(struct pci_dev *pdev, unsigned long paddr, size_t req_size)
 {
 	int i, ps, ps_shift, entry, entries, mapsize, last_entry;
 	u64 xio_addr, end_xio_addr;
diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c
index 94e584527f4..012f3b82ee5 100644
--- a/arch/ia64/sn/pci/tioce_provider.c
+++ b/arch/ia64/sn/pci/tioce_provider.c
@@ -493,7 +493,7 @@ tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
 
 		if (&map->ce_dmamap_list == &ce_kern->ce_dmamap_list) {
 			printk(KERN_WARNING
-			       "%s:  %s - no map found for bus_addr 0x%lx\n",
+			       "%s:  %s - no map found for bus_addr 0x%llx\n",
 			       __func__, pci_name(pdev), bus_addr);
 		} else if (--map->refcnt == 0) {
 			for (i = 0; i < map->ate_count; i++) {
@@ -642,7 +642,7 @@ dma_map_done:
  * in the address.
  */
 static u64
-tioce_dma(struct pci_dev *pdev, u64 paddr, size_t byte_count, int dma_flags)
+tioce_dma(struct pci_dev *pdev, unsigned long  paddr, size_t byte_count, int dma_flags)
 {
 	return tioce_do_dma_map(pdev, paddr, byte_count, 0, dma_flags);
 }
@@ -657,7 +657,7 @@ tioce_dma(struct pci_dev *pdev, u64 paddr, size_t byte_count, int dma_flags)
  * in the address.
  */
 static u64
-tioce_dma_consistent(struct pci_dev *pdev, u64 paddr, size_t byte_count, int dma_flags)
+tioce_dma_consistent(struct pci_dev *pdev, unsigned long  paddr, size_t byte_count, int dma_flags)
 {
 	return tioce_do_dma_map(pdev, paddr, byte_count, 1, dma_flags);
 }
diff --git a/arch/ia64/xen/irq_xen.c b/arch/ia64/xen/irq_xen.c
index af93aadb68b..f042e192d2f 100644
--- a/arch/ia64/xen/irq_xen.c
+++ b/arch/ia64/xen/irq_xen.c
@@ -138,7 +138,7 @@ static void
 __xen_register_percpu_irq(unsigned int cpu, unsigned int vec,
 			struct irqaction *action, int save)
 {
-	irq_desc_t *desc;
+	struct irq_desc *desc;
 	int irq = 0;
 
 	if (xen_slab_ready) {
diff --git a/arch/m32r/kernel/process.c b/arch/m32r/kernel/process.c
index 3e876f0baeb..67a01e1e428 100644
--- a/arch/m32r/kernel/process.c
+++ b/arch/m32r/kernel/process.c
@@ -302,11 +302,6 @@ asmlinkage int sys_execve(char __user *ufilename, char __user * __user *uargv,
 		goto out;
 
 	error = do_execve(filename, uargv, uenvp, &regs);
-	if (error == 0) {
-		task_lock(current);
-		current->ptrace &= ~PT_DTRACE;
-		task_unlock(current);
-	}
 	putname(filename);
 out:
 	return error;
diff --git a/arch/m32r/kernel/ptrace.c b/arch/m32r/kernel/ptrace.c
index 9aa615d3a5b..bf0abe9e1f7 100644
--- a/arch/m32r/kernel/ptrace.c
+++ b/arch/m32r/kernel/ptrace.c
@@ -676,10 +676,6 @@ arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		if (!valid_signal(data))
 			break;
 		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		if ((child->ptrace & PT_DTRACE) == 0) {
-			/* Spurious delayed TF traps may occur */
-			child->ptrace |= PT_DTRACE;
-		}
 
 		/* Compute next pc.  */
 		pc = get_stack_long(child, PT_BPC);
diff --git a/arch/m32r/mm/fault.c b/arch/m32r/mm/fault.c
index 4a71df4c1b3..7274b47f4c2 100644
--- a/arch/m32r/mm/fault.c
+++ b/arch/m32r/mm/fault.c
@@ -196,7 +196,7 @@ survive:
 	 */
 	addr = (address & PAGE_MASK);
 	set_thread_fault_code(error_code);
-	fault = handle_mm_fault(mm, vma, addr, write);
+	fault = handle_mm_fault(mm, vma, addr, write ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c
index 184acc90808..aacd6d17b83 100644
--- a/arch/m68k/kernel/traps.c
+++ b/arch/m68k/kernel/traps.c
@@ -1057,7 +1057,6 @@ asmlinkage void trap_c(struct frame *fp)
 	if (fp->ptregs.sr & PS_S) {
 		if ((fp->ptregs.vector >> 2) == VEC_TRACE) {
 			/* traced a trapping instruction */
-			current->ptrace |= PT_DTRACE;
 		} else
 			bad_super_trap(fp);
 		return;
diff --git a/arch/m68k/mm/fault.c b/arch/m68k/mm/fault.c
index f493f03231d..d0e35cf99fc 100644
--- a/arch/m68k/mm/fault.c
+++ b/arch/m68k/mm/fault.c
@@ -155,7 +155,7 @@ good_area:
 	 */
 
  survive:
-	fault = handle_mm_fault(mm, vma, address, write);
+	fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0);
 #ifdef DEBUG
 	printk("handle_mm_fault returns %d\n",fault);
 #endif
diff --git a/arch/m68knommu/kernel/asm-offsets.c b/arch/m68knommu/kernel/asm-offsets.c
index f500dd6935d..594ee0e657f 100644
--- a/arch/m68knommu/kernel/asm-offsets.c
+++ b/arch/m68knommu/kernel/asm-offsets.c
@@ -73,7 +73,6 @@ int main(void)
 	DEFINE(TRAP_TRACE, TRAP_TRACE);
 
 	DEFINE(PT_PTRACED, PT_PTRACED);
-	DEFINE(PT_DTRACE, PT_DTRACE);
 
 	DEFINE(THREAD_SIZE, THREAD_SIZE);
 
diff --git a/arch/m68knommu/kernel/traps.c b/arch/m68knommu/kernel/traps.c
index 5d5d56bcd0e..51d325343ab 100644
--- a/arch/m68knommu/kernel/traps.c
+++ b/arch/m68knommu/kernel/traps.c
@@ -200,7 +200,6 @@ asmlinkage void trap_c(struct frame *fp)
 	if (fp->ptregs.sr & PS_S) {
 		if ((fp->ptregs.vector >> 2) == VEC_TRACE) {
 			/* traced a trapping instruction */
-			current->ptrace |= PT_DTRACE;
 		} else
 			bad_super_trap(fp);
 		return;
diff --git a/arch/microblaze/kernel/init_task.c b/arch/microblaze/kernel/init_task.c
index 48eb9fb255f..67da22579b6 100644
--- a/arch/microblaze/kernel/init_task.c
+++ b/arch/microblaze/kernel/init_task.c
@@ -18,8 +18,6 @@
 
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-EXPORT_SYMBOL(init_mm);
 
 union thread_union init_thread_union
 	__attribute__((__section__(".data.init_task"))) =
diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S
index 8ae807ab7a5..d34d38dcd12 100644
--- a/arch/microblaze/kernel/vmlinux.lds.S
+++ b/arch/microblaze/kernel/vmlinux.lds.S
@@ -62,7 +62,8 @@ SECTIONS {
 
 	_sdata = . ;
 	.data ALIGN (4096) : { /* page aligned when MMU used - origin 0x4 */
-		*(.data)
+		DATA_DATA
+		CONSTRUCTORS
 	}
 	. = ALIGN(32);
 	.data.cacheline_aligned : { *(.data.cacheline_aligned) }
@@ -98,13 +99,13 @@ SECTIONS {
 	. = ALIGN(4096);
 	.init.text : {
 		_sinittext = . ;
-		*(.init.text)
-		*(.exit.text)
-		*(.exit.data)
+		INIT_TEXT
 		_einittext = .;
 	}
 
-	.init.data : { *(.init.data) }
+	.init.data : {
+		INIT_DATA
+	}
 
 	. = ALIGN(4);
 	.init.ivt : {
diff --git a/arch/microblaze/mm/fault.c b/arch/microblaze/mm/fault.c
index 5e67cd1fab4..956607a63f4 100644
--- a/arch/microblaze/mm/fault.c
+++ b/arch/microblaze/mm/fault.c
@@ -232,7 +232,7 @@ good_area:
 	 * the fault.
 	 */
 survive:
-	fault = handle_mm_fault(mm, vma, address, is_write);
+	fault = handle_mm_fault(mm, vma, address, is_write ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index 053e4634ace..a68d111e55e 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -142,19 +142,6 @@ extern void pcibios_resource_to_bus(struct pci_dev *dev,
 extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
 				    struct pci_bus_region *region);
 
-static inline struct resource *
-pcibios_select_root(struct pci_dev *pdev, struct resource *res)
-{
-	struct resource *root = NULL;
-
-	if (res->flags & IORESOURCE_IO)
-		root = &ioport_resource;
-	if (res->flags & IORESOURCE_MEM)
-		root = &iomem_resource;
-
-	return root;
-}
-
 #define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
 
 static inline int pci_proc_domain(struct pci_bus *bus)
diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c
index 55767ad9f00..6751ce9ede9 100644
--- a/arch/mips/mm/fault.c
+++ b/arch/mips/mm/fault.c
@@ -102,7 +102,7 @@ good_area:
 	 * make sure we exit gracefully rather than endlessly redo
 	 * the fault.
 	 */
-	fault = handle_mm_fault(mm, vma, address, write);
+	fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
diff --git a/arch/mn10300/include/asm/elf.h b/arch/mn10300/include/asm/elf.h
index 49105462e6f..75a70aa9fd6 100644
--- a/arch/mn10300/include/asm/elf.h
+++ b/arch/mn10300/include/asm/elf.h
@@ -28,6 +28,8 @@
 #define R_MN10300_PCREL8	6	/* PC-relative 8-bit signed.  */
 #define R_MN10300_24		9	/* Direct 24 bit.  */
 #define R_MN10300_RELATIVE	23	/* Adjust by program base.  */
+#define R_MN10300_SYM_DIFF	33	/* Adjustment when relaxing. */
+#define R_MN10300_ALIGN 	34	/* Alignment requirement. */
 
 /*
  * ELF register definitions..
diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h
index 0517b45313d..e58b9a46e1b 100644
--- a/arch/mn10300/include/asm/pci.h
+++ b/arch/mn10300/include/asm/pci.h
@@ -106,19 +106,6 @@ extern void pcibios_bus_to_resource(struct pci_dev *dev,
 				    struct resource *res,
 				    struct pci_bus_region *region);
 
-static inline struct resource *
-pcibios_select_root(struct pci_dev *pdev, struct resource *res)
-{
-	struct resource *root = NULL;
-
-	if (res->flags & IORESOURCE_IO)
-		root = &ioport_resource;
-	if (res->flags & IORESOURCE_MEM)
-		root = &iomem_resource;
-
-	return root;
-}
-
 #define pcibios_scan_all_fns(a, b)	0
 
 static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
diff --git a/arch/mn10300/kernel/module.c b/arch/mn10300/kernel/module.c
index 4fa0e3648d8..6aea7fd7699 100644
--- a/arch/mn10300/kernel/module.c
+++ b/arch/mn10300/kernel/module.c
@@ -1,6 +1,6 @@
 /* MN10300 Kernel module helper routines
  *
- * Copyright (C) 2007, 2008 Red Hat, Inc. All Rights Reserved.
+ * Copyright (C) 2007, 2008, 2009 Red Hat, Inc. All Rights Reserved.
  * Written by Mark Salter (msalter@redhat.com)
  * - Derived from arch/i386/kernel/module.c
  *
@@ -103,10 +103,10 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
 		       unsigned int relsec,
 		       struct module *me)
 {
-	unsigned int i;
+	unsigned int i, sym_diff_seen = 0;
 	Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr;
 	Elf32_Sym *sym;
-	Elf32_Addr relocation;
+	Elf32_Addr relocation, sym_diff_val = 0;
 	uint8_t *location;
 	uint32_t value;
 
@@ -126,6 +126,22 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
 		/* this is the adjustment to be made */
 		relocation = sym->st_value + rel[i].r_addend;
 
+		if (sym_diff_seen) {
+			switch (ELF32_R_TYPE(rel[i].r_info)) {
+			case R_MN10300_32:
+			case R_MN10300_24:
+			case R_MN10300_16:
+			case R_MN10300_8:
+				relocation -= sym_diff_val;
+				sym_diff_seen = 0;
+				break;
+			default:
+				printk(KERN_ERR "module %s: Unexpected SYM_DIFF relocation: %u\n",
+				       me->name, ELF32_R_TYPE(rel[i].r_info));
+				return -ENOEXEC;
+			}
+		}
+
 		switch (ELF32_R_TYPE(rel[i].r_info)) {
 			/* for the first four relocation types, we simply
 			 * store the adjustment at the location given */
@@ -157,12 +173,29 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
 			*location = relocation - (uint32_t) location;
 			break;
 
+		case R_MN10300_SYM_DIFF:
+			/* This is used to adjust the next reloc as required
+			 * by relaxation. */
+			sym_diff_seen = 1;
+			sym_diff_val = sym->st_value;
+			break;
+
+		case R_MN10300_ALIGN:
+			/* Just ignore the ALIGN relocs.
+			 * Only interesting if kernel performed relaxation. */
+			continue;
+
 		default:
 			printk(KERN_ERR "module %s: Unknown relocation: %u\n",
 			       me->name, ELF32_R_TYPE(rel[i].r_info));
 			return -ENOEXEC;
 		}
 	}
+	if (sym_diff_seen) {
+		printk(KERN_ERR "module %s: Nothing follows SYM_DIFF relocation: %u\n",
+				       me->name, ELF32_R_TYPE(rel[i].r_info));
+		return -ENOEXEC;
+	}
 	return 0;
 }
 
diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c
index 234cf344cdc..892cce82867 100644
--- a/arch/mn10300/kernel/process.c
+++ b/arch/mn10300/kernel/process.c
@@ -281,9 +281,6 @@ asmlinkage long sys_execve(char __user *name,
 	error = PTR_ERR(filename);
 	if (!IS_ERR(filename)) {
 		error = do_execve(filename, argv, envp, __frame);
-		if (error == 0)
-			current->ptrace &= ~PT_DTRACE;
-
 		putname(filename);
 	}
 
diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S
index 24de6b90f40..bcebcefb4ad 100644
--- a/arch/mn10300/kernel/vmlinux.lds.S
+++ b/arch/mn10300/kernel/vmlinux.lds.S
@@ -38,14 +38,10 @@ SECTIONS
 
   _etext = .;			/* End of text section */
 
-  . = ALIGN(16);		/* Exception table */
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
+  EXCEPTION_TABLE(16)
   BUG_TABLE
 
-  RODATA
+  RO_DATA(PAGE_SIZE)
 
   /* writeable */
   .data : {			/* Data */
@@ -53,27 +49,19 @@ SECTIONS
 	CONSTRUCTORS
 	}
 
-  . = ALIGN(PAGE_SIZE);
-  __nosave_begin = .;
-  .data_nosave : { *(.data.nosave) }
-  . = ALIGN(PAGE_SIZE);
-  __nosave_end = .;
-
-  . = ALIGN(PAGE_SIZE);
-  .data.page_aligned : { *(.data.idt) }
+  .data_nosave : { NOSAVE_DATA; }
 
-  . = ALIGN(32);
-  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+  .data.page_aligned : { PAGE_ALIGNED_DATA(PAGE_SIZE); }
+  .data.cacheline_aligned : { CACHELINE_ALIGNED_DATA(32); }
 
   /* rarely changed data like cpu maps */
   . = ALIGN(32);
   .data.read_mostly : AT(ADDR(.data.read_mostly)) {
-	*(.data.read_mostly)
+	READ_MOSTLY_DATA(32);
 	_edata = .;		/* End of data section */
   }
 
-  . = ALIGN(THREAD_SIZE);	/* init_task */
-  .data.init_task : { *(.data.init_task) }
+  .data.init_task : { INIT_TASK(THREAD_SIZE); }
 
   /* might get freed after init */
   . = ALIGN(PAGE_SIZE);
@@ -88,23 +76,18 @@ SECTIONS
   __init_begin = .;
   .init.text : {
 	_sinittext = .;
-	*(.init.text)
+	INIT_TEXT;
 	_einittext = .;
   }
-  .init.data : { *(.init.data) }
-  . = ALIGN(16);
-  __setup_start = .;
-  .setup.init : { KEEP(*(.init.setup)) }
-  __setup_end = .;
+  .init.data : { INIT_DATA; }
+  .setup.init : { INIT_SETUP(16); }
 
   __initcall_start = .;
   .initcall.init : {
 	INITCALLS
   }
   __initcall_end = .;
-  __con_initcall_start = .;
-  .con_initcall.init : { *(.con_initcall.init) }
-  __con_initcall_end = .;
+  .con_initcall.init : { CON_INITCALL; }
 
   SECURITY_INIT
   . = ALIGN(4);
@@ -114,28 +97,17 @@ SECTIONS
  .altinstr_replacement : { *(.altinstr_replacement) }
   /* .exit.text is discard at runtime, not link time, to deal with references
      from .altinstructions and .eh_frame */
-  .exit.text : { *(.exit.text) }
-  .exit.data : { *(.exit.data) }
+	.exit.text : { EXIT_TEXT; }
+	.exit.data : { EXIT_DATA; }
 
-#ifdef CONFIG_BLK_DEV_INITRD
-  . = ALIGN(PAGE_SIZE);
-  __initramfs_start = .;
-  .init.ramfs : { *(.init.ramfs) }
-  __initramfs_end = .;
-#endif
+  .init.ramfs : { INIT_RAM_FS; }
 
   PERCPU(32)
   . = ALIGN(PAGE_SIZE);
   __init_end = .;
   /* freed after init ends here */
 
-  __bss_start = .;		/* BSS */
-  .bss : {
-	*(.bss.page_aligned)
-	*(.bss)
-  }
-  . = ALIGN(4);
-  __bss_stop = .;
+  BSS(4)
 
   _end = . ;
 
@@ -145,7 +117,7 @@ SECTIONS
 
   /* Sections to be discarded */
   /DISCARD/ : {
-	*(.exitcall.exit)
+	EXIT_CALL
 	}
 
   STABS_DEBUG
diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c
index 33cf25025da..a62e1e138bc 100644
--- a/arch/mn10300/mm/fault.c
+++ b/arch/mn10300/mm/fault.c
@@ -258,7 +258,7 @@ good_area:
 	 * make sure we exit gracefully rather than endlessly redo
 	 * the fault.
 	 */
-	fault = handle_mm_fault(mm, vma, address, write);
+	fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
diff --git a/arch/parisc/hpux/fs.c b/arch/parisc/hpux/fs.c
index 5cbe9f9e5d9..54075360a8f 100644
--- a/arch/parisc/hpux/fs.c
+++ b/arch/parisc/hpux/fs.c
@@ -44,11 +44,6 @@ int hpux_execve(struct pt_regs *regs)
 	error = do_execve(filename, (char __user * __user *) regs->gr[25],
 		(char __user * __user *) regs->gr[24], regs);
 
-	if (error == 0) {
-		task_lock(current);
-		current->ptrace &= ~PT_DTRACE;
-		task_unlock(current);
-	}
 	putname(filename);
 
 out:
diff --git a/arch/parisc/include/asm/pci.h b/arch/parisc/include/asm/pci.h
index 4ba868f44a5..7d842d699df 100644
--- a/arch/parisc/include/asm/pci.h
+++ b/arch/parisc/include/asm/pci.h
@@ -268,19 +268,6 @@ extern void
 pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
 			struct pci_bus_region *region);
 
-static inline struct resource *
-pcibios_select_root(struct pci_dev *pdev, struct resource *res)
-{
-	struct resource *root = NULL;
-
-	if (res->flags & IORESOURCE_IO)
-		root = &ioport_resource;
-	if (res->flags & IORESOURCE_MEM)
-		root = &iomem_resource;
-
-	return root;
-}
-
 static inline void pcibios_penalize_isa_irq(int irq, int active)
 {
 	/* We don't need to penalize isa irq's */
diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
index 6f69101f90b..61c07078c07 100644
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -349,11 +349,6 @@ asmlinkage int sys_execve(struct pt_regs *regs)
 		goto out;
 	error = do_execve(filename, (char __user * __user *) regs->gr[25],
 		(char __user * __user *) regs->gr[24], regs);
-	if (error == 0) {
-		task_lock(current);
-		current->ptrace &= ~PT_DTRACE;
-		task_unlock(current);
-	}
 	putname(filename);
 out:
 
diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c
index 0838155b7a8..1adb40c8166 100644
--- a/arch/parisc/kernel/sys_parisc32.c
+++ b/arch/parisc/kernel/sys_parisc32.c
@@ -77,11 +77,6 @@ asmlinkage int sys32_execve(struct pt_regs *regs)
 		goto out;
 	error = compat_do_execve(filename, compat_ptr(regs->gr[25]),
 				 compat_ptr(regs->gr[24]), regs);
-	if (error == 0) {
-		task_lock(current);
-		current->ptrace &= ~PT_DTRACE;
-		task_unlock(current);
-	}
 	putname(filename);
 out:
 
diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c
index 92c7fa4ecc3..bfb6dd6ab38 100644
--- a/arch/parisc/mm/fault.c
+++ b/arch/parisc/mm/fault.c
@@ -202,7 +202,7 @@ good_area:
 	 * fault.
 	 */
 
-	fault = handle_mm_fault(mm, vma, address, (acc_type & VM_WRITE) != 0);
+	fault = handle_mm_fault(mm, vma, address, (acc_type & VM_WRITE) ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		/*
 		 * We hit a shared mapping outside of the file, or some
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 9fb344d5a86..bf6cedfa05d 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -126,6 +126,7 @@ config PPC
 	select HAVE_OPROFILE
 	select HAVE_SYSCALL_WRAPPERS if PPC64
 	select GENERIC_ATOMIC64 if PPC32
+	select HAVE_PERF_COUNTERS
 
 config EARLY_PRINTK
 	bool
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index d79a902d155..3b100518539 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -2,6 +2,23 @@ menu "Kernel hacking"
 
 source "lib/Kconfig.debug"
 
+config PPC_DISABLE_WERROR
+	bool "Don't build arch/powerpc code with -Werror"
+	default n
+	help
+	  This option tells the compiler NOT to build the code under
+	  arch/powerpc with the -Werror flag (which means warnings
+	  are treated as errors).
+
+	  Only enable this if you are hitting a build failure in the
+	  arch/powerpc code caused by a warning, and you don't feel
+	  inclined to fix it.
+
+config PPC_WERROR
+	bool
+	depends on !PPC_DISABLE_WERROR
+	default y
+
 config PRINT_STACK_DEPTH
 	int "Stack depth to print" if DEBUG_KERNEL
 	default 64
diff --git a/arch/powerpc/boot/cuboot-85xx.c b/arch/powerpc/boot/cuboot-85xx.c
index 6776a1a29f1..277ba4a79b5 100644
--- a/arch/powerpc/boot/cuboot-85xx.c
+++ b/arch/powerpc/boot/cuboot-85xx.c
@@ -15,6 +15,7 @@
 #include "cuboot.h"
 
 #define TARGET_85xx
+#define TARGET_HAS_ETH3
 #include "ppcboot.h"
 
 static bd_t bd;
@@ -27,6 +28,7 @@ static void platform_fixups(void)
 	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
 	dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
 	dt_fixup_mac_address_by_alias("ethernet2", bd.bi_enet2addr);
+	dt_fixup_mac_address_by_alias("ethernet3", bd.bi_enet3addr);
 	dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 8, bd.bi_busfreq);
 
 	/* Unfortunately, the specific model number is encoded in the
diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/powerpc/boot/dts/asp834x-redboot.dts
index 7da84fd7be9..261d10c4534 100644
--- a/arch/powerpc/boot/dts/asp834x-redboot.dts
+++ b/arch/powerpc/boot/dts/asp834x-redboot.dts
@@ -167,7 +167,7 @@
 			interrupt-parent = <&ipic>;
 			interrupts = <39 0x8>;
 			phy_type = "ulpi";
-			port1;
+			port0;
 		};
 		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
 		usb@23000 {
diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts
index 217f8aa6672..35a63183eec 100644
--- a/arch/powerpc/boot/dts/gef_sbc610.dts
+++ b/arch/powerpc/boot/dts/gef_sbc610.dts
@@ -152,6 +152,16 @@
 			interrupt-parent = <&mpic>;
 			dfsrr;
 
+			hwmon@48 {
+				compatible = "national,lm92";
+				reg = <0x48>;
+			};
+
+			hwmon@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
 			rtc@51 {
 				compatible = "epson,rx8581";
 				reg = <0x00000051>;
diff --git a/arch/powerpc/boot/dts/kmeter1.dts b/arch/powerpc/boot/dts/kmeter1.dts
new file mode 100644
index 00000000000..167044f7de1
--- /dev/null
+++ b/arch/powerpc/boot/dts/kmeter1.dts
@@ -0,0 +1,520 @@
+/*
+ * Keymile KMETER1 Device Tree Source
+ *
+ * 2008 DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "KMETER1";
+	compatible = "keymile,KMETER1";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet_piggy2;
+		ethernet1 = &enet_estar1;
+		ethernet2 = &enet_estar2;
+		ethernet3 = &enet_eth1;
+		ethernet4 = &enet_eth2;
+		ethernet5 = &enet_eth3;
+		ethernet6 = &enet_eth4;
+		serial0 = &serial0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8360@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <32768>;		// L1, 32K
+			i-cache-size = <32768>;		// L1, 32K
+			timebase-frequency = <0>;	/* Filled in by U-Boot */
+			bus-frequency = <0>;	/* Filled in by U-Boot */
+			clock-frequency = <0>;	/* Filled in by U-Boot */
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0>;	/* Filled in by U-Boot */
+	};
+
+	soc8360@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8360-immr", "simple-bus";
+		ranges = <0x0 0xe0000000 0x00200000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;	/* Filled in by U-Boot */
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <264000000>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		ipic: pic@700 {
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			compatible = "fsl,pq2pro-pic", "fsl,ipic";
+			interrupt-controller;
+			reg = <0x700 0x100>;
+		};
+
+		par_io@1400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1400 0x100>;
+			compatible = "fsl,mpc8360-par_io";
+			num-ports = <7>;
+
+			pio_ucc1: ucc_pin@0 {
+				reg = <0>;
+
+				pio-map = <
+					/* port pin dir open_drain assignment has_irq */
+					0   1  3  0  2  0	/* MDIO   */
+					0   2  1  0  1  0	/* MDC    */
+
+					0   3  1  0  1  0	/* TxD0   */
+					0   4  1  0  1  0	/* TxD1   */
+					0   5  1  0  1  0	/* TxD2   */
+					0   6  1  0  1  0	/* TxD3   */
+					0   9  2  0  1  0	/* RxD0   */
+					0  10  2  0  1  0	/* RxD1   */
+					0  11  2  0  1  0	/* RxD2   */
+					0  12  2  0  1  0	/* RxD3   */
+					0   7  1  0  1  0	/* TX_EN  */
+					0   8  1  0  1  0	/* TX_ER  */
+					0  15  2  0  1  0	/* RX_DV  */
+					0  16  2  0  1  0	/* RX_ER  */
+					0   0  2  0  1  0	/* RX_CLK */
+					2   9  1  0  3  0	/* GTX_CLK - CLK10 */
+					2   8  2  0  1  0	/* GTX125  - CLK9  */
+				>;
+			};
+
+			pio_ucc2: ucc_pin@1 {
+				reg = <1>;
+
+				pio-map = <
+					/* port pin dir open_drain assignment has_irq */
+					0   1  3  0  2  0	/* MDIO   */
+					0   2  1  0  1  0	/* MDC    */
+
+					0  17  1  0  1  0	/* TxD0   */
+					0  18  1  0  1  0	/* TxD1   */
+					0  19  1  0  1  0	/* TxD2   */
+					0  20  1  0  1  0	/* TxD3   */
+					0  23  2  0  1  0	/* RxD0   */
+					0  24  2  0  1  0	/* RxD1   */
+					0  25  2  0  1  0	/* RxD2   */
+					0  26  2  0  1  0	/* RxD3   */
+					0  21  1  0  1  0	/* TX_EN  */
+					0  22  1  0  1  0	/* TX_ER  */
+					0  29  2  0  1  0	/* RX_DV  */
+					0  30  2  0  1  0	/* RX_ER  */
+					0  31  2  0  1  0	/* RX_CLK */
+					2  2   1  0  2  0	/* GTX_CLK - CLK3  */
+					2  3   2  0  1  0	/* GTX125  - CLK4  */
+				>;
+			};
+
+			pio_ucc4: ucc_pin@3 {
+				reg = <3>;
+
+				pio-map = <
+					/* port pin dir open_drain assignment has_irq */
+					0   1  3  0  2  0	/* MDIO */
+					0   2  1  0  1  0	/* MDC  */
+
+					1  14  1  0  1  0	/* TxD0   (PB14, out, f1) */
+					1  15  1  0  1  0	/* TxD1   (PB15, out, f1) */
+					1  20  2  0  1  0	/* RxD0   (PB20, in,  f1) */
+					1  21  2  0  1  0	/* RxD1   (PB21, in,  f1) */
+					1  18  1  0  1  0	/* TX_EN  (PB18, out, f1) */
+					1  26  2  0  1  0	/* RX_DV  (PB26, in,  f1) */
+					1  27  2  0  1  0	/* RX_ER  (PB27, in,  f1) */
+
+					2  16  2  0  1  0	/* UCC4_RMII_CLK (CLK17) */
+				>;
+			};
+
+			pio_ucc5: ucc_pin@4 {
+				reg = <4>;
+
+				pio-map = <
+					/* port pin dir open_drain assignment has_irq */
+					0   1  3  0  2  0	/* MDIO */
+					0   2  1  0  1  0	/* MDC  */
+
+					3   0  1  0  1  0	/* TxD0  (PD0,  out, f1) */
+					3   1  1  0  1  0	/* TxD1  (PD1,  out, f1) */
+					3   6  2  0  1  0	/* RxD0  (PD6,   in, f1) */
+					3   7  2  0  1  0	/* RxD1  (PD7,   in, f1) */
+					3   4  1  0  1  0	/* TX_EN (PD4,  out, f1) */
+					3  12  2  0  1  0	/* RX_DV (PD12,  in, f1) */
+					3  13  2  0  1  0	/* RX_ER (PD13,  in, f1) */
+				>;
+			};
+
+			pio_ucc6: ucc_pin@5 {
+				reg = <5>;
+
+				pio-map = <
+					/* port pin dir open_drain assignment has_irq */
+					0   1  3  0  2  0	/* MDIO */
+					0   2  1  0  1  0	/* MDC  */
+
+					3  14  1  0  1  0	/* TxD0   (PD14, out, f1) */
+					3  15  1  0  1  0	/* TxD1   (PD15, out, f1) */
+					3  20  2  0  1  0	/* RxD0   (PD20, in,  f1) */
+					3  21  2  0  1  0	/* RxD1   (PD21, in,  f1) */
+					3  18  1  0  1  0	/* TX_EN  (PD18, out, f1) */
+					3  26  2  0  1  0	/* RX_DV  (PD26, in,  f1) */
+					3  27  2  0  1  0	/* RX_ER  (PD27, in,  f1) */
+				>;
+			};
+
+			pio_ucc7: ucc_pin@6 {
+				reg = <6>;
+
+				pio-map = <
+					/* port pin dir open_drain assignment has_irq */
+					0   1  3  0  2  0	/* MDIO */
+					0   2  1  0  1  0	/* MDC  */
+
+					4   0  1  0  1  0	/* TxD0   (PE0,  out, f1) */
+					4   1  1  0  1  0	/* TxD1   (PE1,  out, f1) */
+					4   6  2  0  1  0	/* RxD0   (PE6,   in, f1) */
+					4   7  2  0  1  0	/* RxD1   (PE7,   in, f1) */
+					4   4  1  0  1  0	/* TX_EN  (PE4,  out, f1) */
+					4  12  2  0  1  0	/* RX_DV  (PE12,  in, f1) */
+					4  13  2  0  1  0	/* RX_ER  (PE13,  in, f1) */
+				>;
+			};
+
+			pio_ucc8: ucc_pin@7 {
+				reg = <7>;
+
+				pio-map = <
+					/* port pin dir open_drain assignment has_irq */
+					0   1  3  0  2  0	/* MDIO */
+					0   2  1  0  1  0	/* MDC  */
+
+					4  14  1  0  2  0	/* TxD0   (PE14, out, f2) */
+					4  15  1  0  1  0	/* TxD1   (PE15, out, f1) */
+					4  20  2  0  1  0	/* RxD0   (PE20, in,  f1) */
+					4  21  2  0  1  0	/* RxD1   (PE21, in,  f1) */
+					4  18  1  0  1  0	/* TX_EN  (PE18, out, f1) */
+					4  26  2  0  1  0	/* RX_DV  (PE26, in,  f1) */
+					4  27  2  0  1  0	/* RX_ER  (PE27, in,  f1) */
+
+					2  15  2  0  1  0	/* UCCx_RMII_CLK (CLK16) */
+				>;
+			};
+
+		};
+
+		qe@100000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,qe";
+			ranges = <0x0 0x100000 0x100000>;
+			reg = <0x100000 0x480>;
+			clock-frequency = <0>;	/* Filled in by U-Boot */
+			brg-frequency = <0>;	/* Filled in by U-Boot */
+			bus-frequency = <0>;	/* Filled in by U-Boot */
+
+			muram@10000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,qe-muram", "fsl,cpm-muram";
+				ranges = <0x0 0x00010000 0x0000c000>;
+
+				data-only@0 {
+					compatible = "fsl,qe-muram-data",
+						     "fsl,cpm-muram-data";
+					reg = <0x0 0xc000>;
+				};
+			};
+
+			/* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
+			enet_estar1: ucc@2000 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <1>;
+				reg = <0x2000 0x200>;
+				interrupts = <32>;
+				interrupt-parent = <&qeic>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				rx-clock-name = "none";
+				tx-clock-name = "clk9";
+				phy-handle = <&phy_estar1>;
+				phy-connection-type = "rgmii-id";
+				pio-handle = <&pio_ucc1>;
+			};
+
+			/* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
+			enet_estar2: ucc@3000 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <2>;
+				reg = <0x3000 0x200>;
+				interrupts = <33>;
+				interrupt-parent = <&qeic>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				rx-clock-name = "none";
+				tx-clock-name = "clk4";
+				phy-handle = <&phy_estar2>;
+				phy-connection-type = "rgmii-id";
+				pio-handle = <&pio_ucc2>;
+			};
+
+			/* Piggy2 (UCC4, MDIO 0x00, RMII) */
+			enet_piggy2: ucc@3200 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <4>;
+				reg = <0x3200 0x200>;
+				interrupts = <35>;
+				interrupt-parent = <&qeic>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				rx-clock-name = "none";
+				tx-clock-name = "clk17";
+				phy-handle = <&phy_piggy2>;
+				phy-connection-type = "rmii";
+				pio-handle = <&pio_ucc4>;
+			};
+
+			/* Eth-1 (UCC5, MDIO 0x08, RMII) */
+			enet_eth1: ucc@2400 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <5>;
+				reg = <0x2400 0x200>;
+				interrupts = <40>;
+				interrupt-parent = <&qeic>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				rx-clock-name = "none";
+				tx-clock-name = "clk16";
+				phy-handle = <&phy_eth1>;
+				phy-connection-type = "rmii";
+				pio-handle = <&pio_ucc5>;
+			};
+
+			/* Eth-2 (UCC6, MDIO 0x09, RMII) */
+			enet_eth2: ucc@3400 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <6>;
+				reg = <0x3400 0x200>;
+				interrupts = <41>;
+				interrupt-parent = <&qeic>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				rx-clock-name = "none";
+				tx-clock-name = "clk16";
+				phy-handle = <&phy_eth2>;
+				phy-connection-type = "rmii";
+				pio-handle = <&pio_ucc6>;
+			};
+
+			/* Eth-3 (UCC7, MDIO 0x0a, RMII) */
+			enet_eth3: ucc@2600 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <7>;
+				reg = <0x2600 0x200>;
+				interrupts = <42>;
+				interrupt-parent = <&qeic>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				rx-clock-name = "none";
+				tx-clock-name = "clk16";
+				phy-handle = <&phy_eth3>;
+				phy-connection-type = "rmii";
+				pio-handle = <&pio_ucc7>;
+			};
+
+			/* Eth-4 (UCC8, MDIO 0x0b, RMII) */
+			enet_eth4: ucc@3600 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <8>;
+				reg = <0x3600 0x200>;
+				interrupts = <43>;
+				interrupt-parent = <&qeic>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				rx-clock-name = "none";
+				tx-clock-name = "clk16";
+				phy-handle = <&phy_eth4>;
+				phy-connection-type = "rmii";
+				pio-handle = <&pio_ucc8>;
+			};
+
+			mdio@3320 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x3320 0x18>;
+				compatible = "fsl,ucc-mdio";
+
+				/* Piggy2 (UCC4, MDIO 0x00, RMII) */
+				phy_piggy2: ethernet-phy@00 {
+					reg = <0x0>;
+				};
+
+				/* Eth-1 (UCC5, MDIO 0x08, RMII) */
+				phy_eth1: ethernet-phy@08 {
+					reg = <0x08>;
+				};
+
+				/* Eth-2 (UCC6, MDIO 0x09, RMII) */
+				phy_eth2: ethernet-phy@09 {
+					reg = <0x09>;
+				};
+
+				/* Eth-3 (UCC7, MDIO 0x0a, RMII) */
+				phy_eth3: ethernet-phy@0a {
+					reg = <0x0a>;
+				};
+
+				/* Eth-4 (UCC8, MDIO 0x0b, RMII) */
+				phy_eth4: ethernet-phy@0b {
+					reg = <0x0b>;
+				};
+
+				/* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
+				phy_estar1: ethernet-phy@10 {
+					interrupt-parent = <&ipic>;
+					interrupts = <17 0x8>;
+					reg = <0x10>;
+				};
+
+				/* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
+				phy_estar2: ethernet-phy@11 {
+					interrupt-parent = <&ipic>;
+					interrupts = <18 0x8>;
+					reg = <0x11>;
+				};
+			};
+
+			qeic: interrupt-controller@80 {
+				interrupt-controller;
+				compatible = "fsl,qe-ic";
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				reg = <0x80 0x80>;
+				interrupts = <32 8 33 8>;
+				interrupt-parent = <&ipic>;
+			};
+		};
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
+			     "simple-bus";
+		reg = <0xe0005000 0xd8>;
+		ranges = <0 0 0xf0000000 0x04000000>;	/* Filled in by U-Boot */
+
+		flash@f0000000,0 {
+			compatible = "cfi-flash";
+			/*
+			 * The Intel P30 chip has 2 non-identical chips on
+			 * one die, so we need to define 2 seperate regions
+			 * that are scanned by physmap_of independantly.
+			 */
+			reg = <0 0x00000000 0x02000000
+			       0 0x02000000 0x02000000>;	/* Filled in by U-Boot */
+			bank-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "u-boot";
+				reg = <0 0x40000>;
+			};
+			partition@40000 {
+				label = "env";
+				reg = <0x40000 0x40000>;
+			};
+			partition@80000 {
+				label = "dtb";
+				reg = <0x80000 0x20000>;
+			};
+			partition@a0000 {
+				label = "kernel";
+				reg = <0xa0000 0x300000>;
+			};
+			partition@3a0000 {
+				label = "ramdisk";
+				reg = <0x3a0000 0x800000>;
+			};
+			partition@ba0000 {
+				label = "user";
+				reg = <0xba0000 0x3460000>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts
index 2a1929acaab..60f332778e4 100644
--- a/arch/powerpc/boot/dts/mpc8272ads.dts
+++ b/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -17,6 +17,13 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		serial0 = &scc1;
+		serial1 = &scc4;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -46,13 +53,13 @@
 		#size-cells = <1>;
 		reg = <0xf0010100 0x40>;
 
-		ranges = <0x0 0x0 0xfe000000 0x2000000
+		ranges = <0x0 0x0 0xff800000 0x00800000
 		          0x1 0x0 0xf4500000 0x8000
 		          0x3 0x0 0xf8200000 0x8000>;
 
 		flash@0,0 {
 			compatible = "jedec-flash";
-			reg = <0x0 0x0 0x2000000>;
+			reg = <0x0 0x0 0x00800000>;
 			bank-width = <4>;
 			device-width = <1>;
 		};
@@ -144,7 +151,7 @@
 				reg = <0x119f0 0x10 0x115f0 0x10>;
 			};
 
-			serial@11a00 {
+			scc1: serial@11a00 {
 				device_type = "serial";
 				compatible = "fsl,mpc8272-scc-uart",
 				             "fsl,cpm2-scc-uart";
@@ -155,7 +162,7 @@
 				fsl,cpm-command = <0x800000>;
 			};
 
-			serial@11a60 {
+			scc4: serial@11a60 {
 				device_type = "serial";
 				compatible = "fsl,mpc8272-scc-uart",
 				             "fsl,cpm2-scc-uart";
@@ -192,7 +199,7 @@
 				};
 			};
 
-			ethernet@11300 {
+			eth0: ethernet@11300 {
 				device_type = "network";
 				compatible = "fsl,mpc8272-fcc-enet",
 				             "fsl,cpm2-fcc-enet";
@@ -205,7 +212,7 @@
 				fsl,cpm-command = <0x12000300>;
 			};
 
-			ethernet@11320 {
+			eth1: ethernet@11320 {
 				device_type = "network";
 				compatible = "fsl,mpc8272-fcc-enet",
 				             "fsl,cpm2-fcc-enet";
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts
index 3f4c5fb988a..32e10f588c1 100644
--- a/arch/powerpc/boot/dts/mpc8315erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -322,6 +322,21 @@
 			reg = <0x700 0x100>;
 			device_type = "ipic";
 		};
+
+		ipic-msi@7c0 {
+			compatible = "fsl,ipic-msi";
+			reg = <0x7c0 0x40>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <0x43 0x8
+				      0x4  0x8
+				      0x51 0x8
+				      0x52 0x8
+				      0x56 0x8
+				      0x57 0x8
+				      0x58 0x8
+				      0x59 0x8>;
+			interrupt-parent = < &ipic >;
+		};
 	};
 
 	pci0: pci@e0008500 {
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index e3eeaeda918..feeeb7f9d60 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -156,7 +156,7 @@
 			interrupt-parent = <&ipic>;
 			interrupts = <39 0x8>;
 			phy_type = "ulpi";
-			port1;
+			port0;
 		};
 
 		usb@23000 {
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index a2553a6f900..230febb9b72 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -153,7 +153,7 @@
 			interrupt-parent = <&ipic>;
 			interrupts = <39 0x8>;
 			phy_type = "ulpi";
-			port1;
+			port0;
 		};
 		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
 		usb@23000 {
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index 67bb372c945..f32c2811c6d 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -155,7 +155,7 @@
 			};
 
 			sdhci@2e000 {
-				compatible = "fsl,mpc8377-esdhc", "fsl,mpc8379-esdhc";
+				compatible = "fsl,mpc8377-esdhc", "fsl,esdhc";
 				reg = <0x2e000 0x1000>;
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 053339390c2..224b4f0704b 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -169,7 +169,7 @@
 			};
 
 			sdhci@2e000 {
-				compatible = "fsl,mpc8377-esdhc", "fsl,mpc8379-esdhc";
+				compatible = "fsl,mpc8377-esdhc", "fsl,esdhc";
 				reg = <0x2e000 0x1000>;
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index a955a577db8..f720ab9af30 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -155,7 +155,7 @@
 			};
 
 			sdhci@2e000 {
-				compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc";
+				compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
 				reg = <0x2e000 0x1000>;
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 5d90e85704c..474ea2fa3f8 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -169,7 +169,7 @@
 			};
 
 			sdhci@2e000 {
-				compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc";
+				compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
 				reg = <0x2e000 0x1000>;
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index d266ddbfc28..4fa221fd9bd 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -153,7 +153,7 @@
 			};
 
 			sdhci@2e000 {
-				compatible = "fsl,mpc8379-esdhc";
+				compatible = "fsl,mpc8379-esdhc", "fsl,esdhc";
 				reg = <0x2e000 0x1000>;
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index 98ae95bd18f..d4838af8d37 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -167,7 +167,7 @@
 			};
 
 			sdhci@2e000 {
-				compatible = "fsl,mpc8379-esdhc";
+				compatible = "fsl,mpc8379-esdhc", "fsl,esdhc";
 				reg = <0x2e000 0x1000>;
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
index 39c2927503c..a8dcb018c4a 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -24,6 +24,8 @@
 		ethernet1 = &enet1;
 		ethernet2 = &enet2;
 		ethernet3 = &enet3;
+		ethernet5 = &enet5;
+		ethernet7 = &enet7;
 		pci1 = &pci1;
 		rapidio0 = &rio0;
 	};
@@ -70,8 +72,30 @@
 			#size-cells = <1>;
 			compatible = "cfi-flash";
 			reg = <0x0 0x0 0x02000000>;
-			bank-width = <2>;
+			bank-width = <1>;
 			device-width = <1>;
+			partition@0 {
+				label = "ramdisk";
+				reg = <0x00000000 0x01c00000>;
+			};
+			partition@1c00000 {
+				label = "kernel";
+				reg = <0x01c00000 0x002e0000>;
+			};
+			partiton@1ee0000 {
+				label = "dtb";
+				reg = <0x01ee0000 0x00020000>;
+			};
+			partition@1f00000 {
+				label = "firmware";
+				reg = <0x01f00000 0x00080000>;
+				read-only;
+			};
+			partition@1f80000 {
+				label = "u-boot";
+				reg = <0x01f80000 0x00080000>;
+				read-only;
+			};
 		};
 
 		bcsr@1,0 {
@@ -466,6 +490,37 @@
 				reg = <0x3>;
 				device_type = "ethernet-phy";
 			};
+			qe_phy5: ethernet-phy@04 {
+				interrupt-parent = <&mpic>;
+				reg = <0x04>;
+				device_type = "ethernet-phy";
+			};
+			qe_phy7: ethernet-phy@06 {
+				interrupt-parent = <&mpic>;
+				reg = <0x6>;
+				device_type = "ethernet-phy";
+			};
+		};
+		mdio@3520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3520 0x18>;
+			compatible = "fsl,ucc-mdio";
+
+			tbi0: tbi-phy@15 {
+			reg = <0x15>;
+			device_type = "tbi-phy";
+			};
+		};
+		mdio@3720 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3720 0x38>;
+			compatible = "fsl,ucc-mdio";
+			tbi1: tbi-phy@17 {
+				reg = <0x17>;
+				device_type = "tbi-phy";
+			};
 		};
 
 		enet2: ucc@2200 {
@@ -513,6 +568,36 @@
 			phy-connection-type = "rgmii-id";
 		};
 
+		enet5: ucc@3400 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <6>;
+			reg = <0x3400 0x200>;
+			interrupts = <41>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "none";
+			tbi-handle = <&tbi0>;
+			phy-handle = <&qe_phy5>;
+			phy-connection-type = "sgmii";
+		};
+
+		enet7: ucc@3600 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <8>;
+			reg = <0x3600 0x200>;
+			interrupts = <43>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "none";
+			tbi-handle = <&tbi1>;
+			phy-handle = <&qe_phy7>;
+			phy-connection-type = "sgmii";
+		};
+
 		muram@10000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index cfc2c60d1f5..f468d215f71 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -100,8 +100,18 @@
 		};
 
 		board-control@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
 			compatible = "fsl,fpga-pixis";
 			reg = <3 0 0x20>;
+			ranges = <0 3 0 0x20>;
+
+			sdcsr_pio: gpio-controller@a {
+				#gpio-cells = <2>;
+				compatible = "fsl,fpga-pixis-gpio-bank";
+				reg = <0xa 1>;
+				gpio-controller;
+			};
 		};
 	};
 
@@ -176,6 +186,28 @@
 			interrupt-parent = <&mpic>;
 		};
 
+		spi@7000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc8610-spi", "fsl,spi";
+			reg = <0x7000 0x40>;
+			cell-index = <0>;
+			interrupts = <59 2>;
+			interrupt-parent = <&mpic>;
+			mode = "cpu";
+			gpios = <&sdcsr_pio 7 0>;
+
+			mmc-slot@0 {
+				compatible = "fsl,mpc8610hpcd-mmc-slot",
+					     "mmc-spi-slot";
+				reg = <0>;
+				gpios = <&sdcsr_pio 0 1   /* nCD */
+					 &sdcsr_pio 1 0>; /*  WP */
+				voltage-ranges = <3300 3300>;
+				spi-max-frequency = <50000000>;
+			};
+		};
+
 		display@2c000 {
 			compatible = "fsl,diu";
 			reg = <0x2c000 100>;
diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts
index 89583471389..30bfdc04c6d 100644
--- a/arch/powerpc/boot/dts/pcm030.dts
+++ b/arch/powerpc/boot/dts/pcm030.dts
@@ -258,34 +258,16 @@
 				compatible = "nxp,pcf8563";
 				reg = <0x51>;
 			};
-			/* FIXME: EEPROM */
+			eeprom@52 {
+				compatible = "catalyst,24c32";
+				reg = <0x52>;
+			};
 		};
 
 		sram@8000 {
 			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
 			reg = <0x8000 0x4000>;
 		};
-
-		/* This is only an example device to show the usage of gpios. It maps all available
-		 * gpios to the "gpio-provider" device.
-		 */
-		gpio {
-			compatible = "gpio-provider";
-
-						    /* mpc52xx		exp.con		patchfield */
-			gpios = <&gpio_wkup	0 0 /* GPIO_WKUP_7	11d		jp13-3     */
-				 &gpio_wkup	1 0 /* GPIO_WKUP_6	14c			   */
-				 &gpio_wkup	6 0 /* PSC2_4		43c		x5-11	   */
-				 &gpio_simple	2 0 /* IRDA_1		24c		x7-6	set GPS_PORT_CONFIG[IRDA] = 0 */
-				 &gpio_simple	3 0 /* IRDA_0				x8-5	set GPS_PORT_CONFIG[IRDA] = 0 */
-				 &gpt2		0 0 /* timer2		12d		x4-4	   */
-				 &gpt3		0 0 /* timer3		13d		x6-4	   */
-				 &gpt4		0 0 /* timer4		61c		x2-16	   */
-				 &gpt5		0 0 /* timer5		44c		x7-11	   */
-				 &gpt6		0 0 /* timer6		60c		x8-15	   */
-				 &gpt7		0 0 /* timer7		36a		x17-9	   */
-				 >;
-		};
 	};
 
 	pci@f0000d00 {
diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts
index 5fb6f6684b0..2d9fa68f641 100644
--- a/arch/powerpc/boot/dts/sbc8349.dts
+++ b/arch/powerpc/boot/dts/sbc8349.dts
@@ -144,7 +144,7 @@
 			interrupt-parent = <&ipic>;
 			interrupts = <39 0x8>;
 			phy_type = "ulpi";
-			port1;
+			port0;
 		};
 		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
 		usb@23000 {
diff --git a/arch/powerpc/boot/dts/xcalibur1501.dts b/arch/powerpc/boot/dts/xcalibur1501.dts
new file mode 100644
index 00000000000..ac0a617b429
--- /dev/null
+++ b/arch/powerpc/boot/dts/xcalibur1501.dts
@@ -0,0 +1,696 @@
+/*
+ * Copyright (C) 2008 Extreme Engineering Solutions, Inc.
+ * Based on MPC8572DS device tree from Freescale Semiconductor, Inc.
+ *
+ * XCalibur1501 6U CompactPCI single-board computer based on MPC8572E
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+/ {
+	model = "xes,xcalibur1501";
+	compatible = "xes,xcalibur1501", "xes,MPC8572";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8572@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,8572@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x0>;	// Filled in by U-Boot
+	};
+
+	localbus@ef005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xef005000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+		/* Local bus region mappings */
+		ranges = <0 0 0 0xf8000000 0x8000000  /* CS0: Flash 1 */
+			  1 0 0 0xf0000000 0x8000000  /* CS1: Flash 2 */
+			  2 0 0 0xef800000 0x40000    /* CS2: NAND CE1 */
+			  3 0 0 0xef840000 0x40000    /* CS3: NAND CE2 */
+			  4 0 0 0xe9000000 0x100000>; /* CS4: USB */
+
+		nor-boot@0,0 {
+			compatible = "amd,s29gl01gp", "cfi-flash";
+			bank-width = <2>;
+			reg = <0 0 0x8000000>; /* 128MB */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "Primary user space";
+				reg = <0x00000000 0x6f00000>; /* 111 MB */
+			};
+			partition@6f00000 {
+				label = "Primary kernel";
+				reg = <0x6f00000 0x1000000>; /* 16 MB */
+			};
+			partition@7f00000 {
+				label = "Primary DTB";
+				reg = <0x7f00000 0x40000>; /* 256 KB */
+			};
+			partition@7f40000 {
+				label = "Primary U-Boot environment";
+				reg = <0x7f40000 0x40000>; /* 256 KB */
+			};
+			partition@7f80000 {
+				label = "Primary U-Boot";
+				reg = <0x7f80000 0x80000>; /* 512 KB */
+				read-only;
+			};
+		};
+
+		nor-alternate@1,0 {
+			compatible = "amd,s29gl01gp", "cfi-flash";
+			bank-width = <2>;
+			//reg = <0xf0000000 0x08000000>; /* 128MB */
+			reg = <1 0 0x8000000>; /* 128MB */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "Secondary user space";
+				reg = <0x00000000 0x6f00000>; /* 111 MB */
+			};
+			partition@6f00000 {
+				label = "Secondary kernel";
+				reg = <0x6f00000 0x1000000>; /* 16 MB */
+			};
+			partition@7f00000 {
+				label = "Secondary DTB";
+				reg = <0x7f00000 0x40000>; /* 256 KB */
+			};
+			partition@7f40000 {
+				label = "Secondary U-Boot environment";
+				reg = <0x7f40000 0x40000>; /* 256 KB */
+			};
+			partition@7f80000 {
+				label = "Secondary U-Boot";
+				reg = <0x7f80000 0x80000>; /* 512 KB */
+				read-only;
+			};
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/*
+			 * Actual part could be ST Micro NAND08GW3B2A (1 GB),
+			 * Micron MT29F8G08DAA (2x 512 MB), or Micron
+			 * MT29F16G08FAA (2x 1 GB), depending on the build
+			 * configuration
+			 */
+			compatible = "fsl,mpc8572-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <2 0 0x40000>;
+			/* U-Boot should fix this up if chip size > 1 GB */
+			partition@0 {
+				label = "NAND Filesystem";
+				reg = <0 0x40000000>;
+			};
+		};
+
+		usb@4,0 {
+			compatible = "nxp,usb-isp1761";
+			reg = <4 0 0x100000>;
+			bus-width = <32>;
+			interrupt-parent = <&mpic>;
+			interrupts = <10 1>;
+		};
+	};
+
+	soc8572@ef000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8572-immr", "simple-bus";
+		ranges = <0x0 0 0xef000000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8572-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		memory-controller@6000 {
+			compatible = "fsl,mpc8572-memory-controller";
+			reg = <0x6000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8572-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x100000>; // L2, 1M
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			temp-sensor@48 {
+				compatible = "dallas,ds1631", "dallas,ds1621";
+				reg = <0x48>;
+			};
+
+			temp-sensor@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			cpu-supervisor@51 {
+				compatible = "dallas,ds4510";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,at24c128b";
+				reg = <0x54>;
+			};
+
+			rtc@68 {
+				compatible = "stm,m41t00",
+				             "dallas,ds1338";
+				reg = <0x68>;
+			};
+
+			pcie-switch@6a {
+				compatible = "plx,pex8648";
+				reg = <0x6a>;
+			};
+
+			/* On-board signals for VID, flash, serial */
+			gpio1: gpio@18 {
+				compatible = "nxp,pca9557";
+				reg = <0x18>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			/* PMC0/XMC0 signals */
+			gpio2: gpio@1c {
+				compatible = "nxp,pca9557";
+				reg = <0x1c>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			/* PMC1/XMC1 signals */
+			gpio3: gpio@1d {
+				compatible = "nxp,pca9557";
+				reg = <0x1d>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			/* CompactPCI signals (sysen, GA[4:0]) */
+			gpio4: gpio@1e {
+				compatible = "nxp,pca9557";
+				reg = <0x1e>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			/* CompactPCI J5 GPIO and FAL/DEG/PRST */
+			gpio5: gpio@1f {
+				compatible = "nxp,pca9557";
+				reg = <0x1f>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@c300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0xc300 0x4>;
+			ranges = <0x0 0xc100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <76 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <77 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <78 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <79 2>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		/* eTSEC 1 front panel 0 */
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <4 1>;
+					reg = <0x1>;
+				};
+				phy1: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <4 1>;
+					reg = <0x2>;
+				};
+				phy2: ethernet-phy@3 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 1>;
+					reg = <0x3>;
+				};
+				phy3: ethernet-phy@4 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 1>;
+					reg = <0x4>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC 2 front panel 1 */
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC 3 PICMG2.16 backplane port 0 */
+		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy2>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC 4 PICMG2.16 backplane port 1 */
+		enet3: ethernet@27000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <3>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x27000 0x1000>;
+			ranges = <0x0 0x27000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <37 2 38 2 39 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi3>;
+			phy-handle = <&phy3>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi3: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* UART0 */
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		/* UART1 */
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,mpc8572-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		gpio0: gpio@f000 {
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x1000>;
+			interrupts = <47 2>;
+			interrupt-parent = <&mpic>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&gpio0 4 1>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			yellow {
+				label = "Yellow";
+				gpios = <&gpio0 5 1>;
+			};
+
+			red {
+				label = "Red";
+				gpios = <&gpio0 6 1>;
+			};
+
+			green {
+				label = "Green";
+				gpios = <&gpio0 7 1>;
+			};
+		};
+
+		/* PME (pattern-matcher) */
+		pme@10000 {
+			compatible = "fsl,mpc8572-pme", "pme8572";
+			reg = <0x10000 0x5000>;
+			interrupts = <57 2 64 2 65 2 66 2 67 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		tlu@2f000 {
+			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
+			reg = <0x2f000 0x1000>;
+			interupts = <61 2 >;
+			interrupt-parent = <&mpic>;
+		};
+
+		tlu@15000 {
+			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
+			reg = <0x15000 0x1000>;
+			interupts = <75 2>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+
+	/*
+	 * PCI Express controller 3 @ ef008000 is not used.
+	 * This would have been pci0 on other mpc85xx platforms.
+	 *
+	 * PCI Express controller 2 @ ef009000 is not used.
+	 * This would have been pci1 on other mpc85xx platforms.
+	 */
+
+	/* PCI Express controller 1, wired to PEX8648 PCIe switch */
+	pci2: pcie@ef00a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xef00a000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000
+			  0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x0 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x0 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x0 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x0 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x40000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/xpedite5200.dts b/arch/powerpc/boot/dts/xpedite5200.dts
new file mode 100644
index 00000000000..a0cf53fbd55
--- /dev/null
+++ b/arch/powerpc/boot/dts/xpedite5200.dts
@@ -0,0 +1,466 @@
+/*
+ * Copyright (C) 2009 Extreme Engineering Solutions, Inc.
+ * Based on TQM8548 device tree
+ *
+ * XPedite5200 PrPMC/XMC module based on MPC8548E
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "xes,xpedite5200";
+	compatible = "xes,xpedite5200", "xes,MPC8548";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8548@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;	// Filled in by U-Boot
+	};
+
+	soc@ef000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xef000000 0x100000>;
+		bus-frequency = <0>;
+		compatible = "fsl,mpc8548-immr", "simple-bus";
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8548-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8548-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		/* On-card I2C */
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			/*
+			 * Board GPIO:
+			 * 	0: BRD_CFG0 (1: P14 IO present)
+			 * 	1: BRD_CFG1 (1: FP ethernet present)
+			 * 	2: BRD_CFG2 (1: XMC IO present)
+			 * 	3: XMC root complex indicator
+			 * 	4: Flash boot device indicator
+			 * 	5: Flash write protect enable
+			 * 	6: PMC monarch indicator
+			 * 	7: PMC EREADY
+			 */
+			gpio1: gpio@18 {
+				compatible = "nxp,pca9556";
+				reg = <0x18>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			/* P14 GPIO */
+			gpio2: gpio@19 {
+				compatible = "nxp,pca9556";
+				reg = <0x19>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,at24c16";
+				reg = <0x50>;
+			};
+
+			rtc@68 {
+				compatible = "stm,m41t00",
+					     "dallas,ds1338";
+				reg = <0x68>;
+			};
+
+			dtt@48 {
+				compatible = "maxim,max1237";
+				reg = <0x34>;
+			};
+		};
+
+		/* Off-card I2C */
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		/* eTSEC1: Front panel port 0 */
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x1>;
+				};
+				phy1: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x2>;
+				};
+				phy2: ethernet-phy@3 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x3>;
+				};
+				phy3: ethernet-phy@4 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x4>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC2: Front panel port 1 */
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC3: Rear panel port 2 */
+		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy2>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC4: Rear panel port 3 */
+		enet3: ethernet@27000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <3>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x27000 0x1000>;
+			ranges = <0x0 0x27000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <37 2 38 2 39 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi3>;
+			phy-handle = <&phy3>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi3: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	// global utilities reg
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+	};
+
+	localbus@ef005000 {
+		compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xef005000 0x100>;	// BRx, ORx, etc.
+
+		ranges = <
+			0 0x0 0xfc000000 0x04000000	// NOR boot flash
+			1 0x0 0xf8000000 0x04000000	// NOR expansion flash
+			2 0x0 0xef800000 0x00010000	// NAND CE1
+			3 0x0 0xef840000 0x00010000	// NAND CE2
+		>;
+
+		nor-boot@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0 0x0 0x4000000>;
+			bank-width = <2>;
+
+			partition@0 {
+				label = "Primary OS";
+				reg = <0x00000000 0x180000>;
+			};
+			partition@180000 {
+				label = "Secondary OS";
+				reg = <0x00180000 0x180000>;
+			};
+			partition@300000 {
+				label = "User";
+				reg = <0x00300000 0x3c80000>;
+			};
+			partition@3f80000 {
+				label = "Boot firmware";
+				reg = <0x03f80000 0x80000>;
+			};
+		};
+
+		nor-alternate@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <1 0x0 0x4000000>;
+			bank-width = <2>;
+
+			partition@0 {
+				label = "Filesystem";
+				reg = <0x00000000 0x3f80000>;
+			};
+			partition@3f80000 {
+				label = "Alternate boot firmware";
+				reg = <0x03f80000 0x80000>;
+			};
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xes,address-ctl-nand";
+			reg = <2 0x0 0x10000>;
+			cle-line = <0x8>;	/* CLE tied to A3 */
+			ale-line = <0x10>;	/* ALE tied to A4 */
+
+			/* U-Boot should fix this up */
+			partition@0 {
+				label = "NAND Filesystem";
+				reg = <0 0x40000000>;
+			};
+		};
+	};
+
+	/* PMC interface */
+	pci0: pci@ef008000 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xef008000 0x1000>;
+		clock-frequency = <33333333>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL */
+				 0xe000 0 0 1 &mpic 2 1
+				 0xe000 0 0 2 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x40000000
+			  0x01000000 0 0x00000000 0xe8000000 0 0x00800000>;
+	};
+
+	/* XMC PCIe is not yet enabled in U-Boot on XPedite5200 */
+};
diff --git a/arch/powerpc/boot/dts/xpedite5200_xmon.dts b/arch/powerpc/boot/dts/xpedite5200_xmon.dts
new file mode 100644
index 00000000000..c5b29752651
--- /dev/null
+++ b/arch/powerpc/boot/dts/xpedite5200_xmon.dts
@@ -0,0 +1,506 @@
+/*
+ * Copyright (C) 2009 Extreme Engineering Solutions, Inc.
+ * Based on TQM8548 device tree
+ *
+ * XPedite5200 PrPMC/XMC module based on MPC8548E.  This dts is for the
+ * xMon boot loader memory map which differs from U-Boot's.
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "xes,xpedite5200";
+	compatible = "xes,xpedite5200", "xes,MPC8548";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	form-factor = "PMC/XMC";
+	boot-bank = <0x0>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8548@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;	// Filled in by boot loader
+	};
+
+	soc@ef000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xef000000 0x100000>;
+		bus-frequency = <0>;
+		compatible = "fsl,mpc8548-immr", "simple-bus";
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8548-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8548-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		/* On-card I2C */
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			/*
+			 * Board GPIO:
+			 * 	0: BRD_CFG0 (1: P14 IO present)
+			 * 	1: BRD_CFG1 (1: FP ethernet present)
+			 * 	2: BRD_CFG2 (1: XMC IO present)
+			 * 	3: XMC root complex indicator
+			 * 	4: Flash boot device indicator
+			 * 	5: Flash write protect enable
+			 * 	6: PMC monarch indicator
+			 * 	7: PMC EREADY
+			 */
+			gpio1: gpio@18 {
+				compatible = "nxp,pca9556";
+				reg = <0x18>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			/* P14 GPIO */
+			gpio2: gpio@19 {
+				compatible = "nxp,pca9556";
+				reg = <0x19>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,at24c16";
+				reg = <0x50>;
+			};
+
+			rtc@68 {
+				compatible = "stm,m41t00",
+					     "dallas,ds1338";
+				reg = <0x68>;
+			};
+
+			dtt@48 {
+				compatible = "maxim,max1237";
+				reg = <0x34>;
+			};
+		};
+
+		/* Off-card I2C */
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		/* eTSEC1: Front panel port 0 */
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x1>;
+				};
+				phy1: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x2>;
+				};
+				phy2: ethernet-phy@3 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x3>;
+				};
+				phy3: ethernet-phy@4 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x4>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC2: Front panel port 1 */
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC3: Rear panel port 2 */
+		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy2>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC4: Rear panel port 3 */
+		enet3: ethernet@27000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <3>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x27000 0x1000>;
+			ranges = <0x0 0x27000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <37 2 38 2 39 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi3>;
+			phy-handle = <&phy3>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi3: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			current-speed = <9600>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			current-speed = <9600>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	// global utilities reg
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+	};
+
+	localbus@ef005000 {
+		compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xef005000 0x100>;	// BRx, ORx, etc.
+
+		ranges = <
+			0 0x0 0xf8000000 0x08000000	// NOR boot flash
+			1 0x0 0xf0000000 0x08000000	// NOR expansion flash
+			2 0x0 0xe8000000 0x00010000	// NAND CE1
+			3 0x0 0xe8010000 0x00010000	// NAND CE2
+		>;
+
+		nor-boot@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0 0x0 0x4000000>;
+			bank-width = <2>;
+
+			partition@0 {
+				label = "Primary OS";
+				reg = <0x00000000 0x180000>;
+			};
+			partition@180000 {
+				label = "Secondary OS";
+				reg = <0x00180000 0x180000>;
+			};
+			partition@300000 {
+				label = "User";
+				reg = <0x00300000 0x3c80000>;
+			};
+			partition@3f80000 {
+				label = "Boot firmware";
+				reg = <0x03f80000 0x80000>;
+			};
+		};
+
+		nor-alternate@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <1 0x0 0x4000000>;
+			bank-width = <2>;
+
+			partition@0 {
+				label = "Filesystem";
+				reg = <0x00000000 0x3f80000>;
+			};
+			partition@3f80000 {
+				label = "Alternate boot firmware";
+				reg = <0x03f80000 0x80000>;
+			};
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xes,address-ctl-nand";
+			reg = <2 0x0 0x10000>;
+			cle-line = <0x8>;	/* CLE tied to A3 */
+			ale-line = <0x10>;	/* ALE tied to A4 */
+
+			partition@0 {
+				label = "NAND Filesystem";
+				reg = <0 0x40000000>;
+			};
+		};
+	};
+
+	/* PMC interface */
+	pci0: pci@ef008000 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xef008000 0x1000>;
+		clock-frequency = <33333333>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL */
+				 0xe000 0 0 1 &mpic 2 1
+				 0xe000 0 0 2 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xd0000000 0 0x01000000>;
+	};
+
+	/* XMC PCIe */
+	pci1: pcie@ef00a000 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x00000 0 0 1 &mpic 0 1
+			0x00000 0 0 2 &mpic 1 1
+			0x00000 0 0 3 &mpic 2 1
+			0x00000 0 0 4 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xd1000000 0 0x01000000>;
+		clock-frequency = <33333333>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xef00a000 0x1000>;
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0xc0000000 0x02000000 0
+			          0xc0000000 0 0x20000000
+				  0x01000000 0 0x00000000 0x01000000 0
+				  0x00000000 0 0x08000000>;
+		};
+	};
+
+	/* Needed for dtbImage boot wrapper compatibility */
+	chosen {
+		linux,stdout-path = &serial0;
+	};
+};
diff --git a/arch/powerpc/boot/dts/xpedite5301.dts b/arch/powerpc/boot/dts/xpedite5301.dts
new file mode 100644
index 00000000000..db7faf5ebb3
--- /dev/null
+++ b/arch/powerpc/boot/dts/xpedite5301.dts
@@ -0,0 +1,640 @@
+/*
+ * Copyright (C) 2008 Extreme Engineering Solutions, Inc.
+ * Based on MPC8572DS device tree from Freescale Semiconductor, Inc.
+ *
+ * XPedite5301 PMC/XMC module based on MPC8572E
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+/ {
+	model = "xes,xpedite5301";
+	compatible = "xes,xpedite5301", "xes,MPC8572";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	form-factor = "PMC/XMC";
+	boot-bank = <0x0>;	/* 0: Primary flash, 1: Secondary flash */
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8572@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,8572@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x0>;	// Filled in by U-Boot
+	};
+
+	localbus@ef005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xef005000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+		/* Local bus region mappings */
+		ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Boot flash */
+			  1 0 0 0xf0000000 0x8000000 /* CS1: Alternate flash */
+			  2 0 0 0xef800000 0x40000   /* CS2: NAND CE1 */
+			  3 0 0 0xef840000 0x40000>; /* CS3: NAND CE2 */
+
+		nor-boot@0,0 {
+			compatible = "amd,s29gl01gp", "cfi-flash";
+			bank-width = <2>;
+			reg = <0 0 0x8000000>; /* 128MB */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "Primary user space";
+				reg = <0x00000000 0x6f00000>; /* 111 MB */
+			};
+			partition@6f00000 {
+				label = "Primary kernel";
+				reg = <0x6f00000 0x1000000>; /* 16 MB */
+			};
+			partition@7f00000 {
+				label = "Primary DTB";
+				reg = <0x7f00000 0x40000>; /* 256 KB */
+			};
+			partition@7f40000 {
+				label = "Primary U-Boot environment";
+				reg = <0x7f40000 0x40000>; /* 256 KB */
+			};
+			partition@7f80000 {
+				label = "Primary U-Boot";
+				reg = <0x7f80000 0x80000>; /* 512 KB */
+				read-only;
+			};
+		};
+
+		nor-alternate@1,0 {
+			compatible = "amd,s29gl01gp", "cfi-flash";
+			bank-width = <2>;
+			//reg = <0xf0000000 0x08000000>; /* 128MB */
+			reg = <1 0 0x8000000>; /* 128MB */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "Secondary user space";
+				reg = <0x00000000 0x6f00000>; /* 111 MB */
+			};
+			partition@6f00000 {
+				label = "Secondary kernel";
+				reg = <0x6f00000 0x1000000>; /* 16 MB */
+			};
+			partition@7f00000 {
+				label = "Secondary DTB";
+				reg = <0x7f00000 0x40000>; /* 256 KB */
+			};
+			partition@7f40000 {
+				label = "Secondary U-Boot environment";
+				reg = <0x7f40000 0x40000>; /* 256 KB */
+			};
+			partition@7f80000 {
+				label = "Secondary U-Boot";
+				reg = <0x7f80000 0x80000>; /* 512 KB */
+				read-only;
+			};
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/*
+			 * Actual part could be ST Micro NAND08GW3B2A (1 GB),
+			 * Micron MT29F8G08DAA (2x 512 MB), or Micron
+			 * MT29F16G08FAA (2x 1 GB), depending on the build
+			 * configuration
+			 */
+			compatible = "fsl,mpc8572-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <2 0 0x40000>;
+			/* U-Boot should fix this up if chip size > 1 GB */
+			partition@0 {
+				label = "NAND Filesystem";
+				reg = <0 0x40000000>;
+			};
+		};
+
+	};
+
+	soc8572@ef000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8572-immr", "simple-bus";
+		ranges = <0x0 0 0xef000000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8572-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		memory-controller@6000 {
+			compatible = "fsl,mpc8572-memory-controller";
+			reg = <0x6000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8572-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x100000>; // L2, 1M
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			temp-sensor@48 {
+				compatible = "dallas,ds1631", "dallas,ds1621";
+				reg = <0x48>;
+			};
+
+			temp-sensor@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			cpu-supervisor@51 {
+				compatible = "dallas,ds4510";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,at24c128b";
+				reg = <0x54>;
+			};
+
+			rtc@68 {
+				compatible = "stm,m41t00",
+				             "dallas,ds1338";
+				reg = <0x68>;
+			};
+
+			pcie-switch@70 {
+				compatible = "plx,pex8518";
+				reg = <0x70>;
+			};
+
+			gpio1: gpio@18 {
+				compatible = "nxp,pca9557";
+				reg = <0x18>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			gpio2: gpio@1c {
+				compatible = "nxp,pca9557";
+				reg = <0x1c>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			gpio3: gpio@1e {
+				compatible = "nxp,pca9557";
+				reg = <0x1e>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			gpio4: gpio@1f {
+				compatible = "nxp,pca9557";
+				reg = <0x1f>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@c300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0xc300 0x4>;
+			ranges = <0x0 0xc100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <76 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <77 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <78 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <79 2>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		/* eTSEC 1 */
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x1>;
+				};
+				phy1: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x2>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC 2 */
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* UART0 */
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		/* UART1 */
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,mpc8572-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		gpio0: gpio@f000 {
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x1000>;
+			interrupts = <47 2>;
+			interrupt-parent = <&mpic>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&gpio0 4 1>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			yellow {
+				label = "Yellow";
+				gpios = <&gpio0 5 1>;
+			};
+
+			red {
+				label = "Red";
+				gpios = <&gpio0 6 1>;
+			};
+
+			green {
+				label = "Green";
+				gpios = <&gpio0 7 1>;
+			};
+		};
+
+		/* PME (pattern-matcher) */
+		pme@10000 {
+			compatible = "fsl,mpc8572-pme", "pme8572";
+			reg = <0x10000 0x5000>;
+			interrupts = <57 2 64 2 65 2 66 2 67 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		tlu@2f000 {
+			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
+			reg = <0x2f000 0x1000>;
+			interupts = <61 2 >;
+			interrupt-parent = <&mpic>;
+		};
+
+		tlu@15000 {
+			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
+			reg = <0x15000 0x1000>;
+			interupts = <75 2>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+
+	/*
+	 * PCI Express controller 3 @ ef008000 is not used.
+	 * This would have been pci0 on other mpc85xx platforms.
+	 */
+
+	/* PCI Express controller 2, wired to XMC P15 connector */
+	pci1: pcie@ef009000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xef009000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0 0xe8800000 0x0 0x00010000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x0 0x0 0x0 0x1 &mpic 0x4 0x1
+			0x0 0x0 0x0 0x2 &mpic 0x5 0x1
+			0x0 0x0 0x0 0x3 &mpic 0x6 0x1
+			0x0 0x0 0x0 0x4 &mpic 0x7 0x1
+			>;
+		pcie@0 {
+			reg = <0x00000000 0x00000000 0x00000000 0x00000000 0x00000000>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x10000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	/* PCI Express controller 1, wired to PEX8112 for PMC interface */
+	pci2: pcie@ef00a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xef00a000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000
+			  0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x0 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x0 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x0 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x0 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x40000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/xpedite5330.dts b/arch/powerpc/boot/dts/xpedite5330.dts
new file mode 100644
index 00000000000..c364ca6ff7d
--- /dev/null
+++ b/arch/powerpc/boot/dts/xpedite5330.dts
@@ -0,0 +1,707 @@
+/*
+ * Copyright (C) 2008 Extreme Engineering Solutions, Inc.
+ * Based on MPC8572DS device tree from Freescale Semiconductor, Inc.
+ *
+ * XPedite5330 3U CompactPCI module based on MPC8572E
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+/ {
+	model = "xes,xpedite5330";
+	compatible = "xes,xpedite5330", "xes,MPC8572";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	form-factor = "3U CompactPCI";
+	boot-bank = <0x0>;	/* 0: Primary flash, 1: Secondary flash */
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	pmcslots {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmcslot@0 {
+			cell-index = <0>;
+			/*
+			 * boolean properties (true if defined):
+			 *     monarch;
+			 *     module-present;
+			 */
+		};
+	};
+
+	xmcslots {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		xmcslot@0 {
+			cell-index = <0>;
+			/*
+			 * boolean properties (true if defined):
+			 *     module-present;
+			 */
+		};
+	};
+
+	cpci {
+		/*
+		 * boolean properties (true if defined):
+		 *     system-controller;
+		 */
+		system-controller;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8572@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,8572@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x0>;	// Filled in by U-Boot
+	};
+
+	localbus@ef005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xef005000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+		/* Local bus region mappings */
+		ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Boot flash */
+			  1 0 0 0xf0000000 0x8000000 /* CS1: Alternate flash */
+			  2 0 0 0xef800000 0x40000   /* CS2: NAND CE1 */
+			  3 0 0 0xef840000 0x40000>; /* CS3: NAND CE2 */
+
+		nor-boot@0,0 {
+			compatible = "amd,s29gl01gp", "cfi-flash";
+			bank-width = <2>;
+			reg = <0 0 0x8000000>; /* 128MB */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "Primary user space";
+				reg = <0x00000000 0x6f00000>; /* 111 MB */
+			};
+			partition@6f00000 {
+				label = "Primary kernel";
+				reg = <0x6f00000 0x1000000>; /* 16 MB */
+			};
+			partition@7f00000 {
+				label = "Primary DTB";
+				reg = <0x7f00000 0x40000>; /* 256 KB */
+			};
+			partition@7f40000 {
+				label = "Primary U-Boot environment";
+				reg = <0x7f40000 0x40000>; /* 256 KB */
+			};
+			partition@7f80000 {
+				label = "Primary U-Boot";
+				reg = <0x7f80000 0x80000>; /* 512 KB */
+				read-only;
+			};
+		};
+
+		nor-alternate@1,0 {
+			compatible = "amd,s29gl01gp", "cfi-flash";
+			bank-width = <2>;
+			//reg = <0xf0000000 0x08000000>; /* 128MB */
+			reg = <1 0 0x8000000>; /* 128MB */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "Secondary user space";
+				reg = <0x00000000 0x6f00000>; /* 111 MB */
+			};
+			partition@6f00000 {
+				label = "Secondary kernel";
+				reg = <0x6f00000 0x1000000>; /* 16 MB */
+			};
+			partition@7f00000 {
+				label = "Secondary DTB";
+				reg = <0x7f00000 0x40000>; /* 256 KB */
+			};
+			partition@7f40000 {
+				label = "Secondary U-Boot environment";
+				reg = <0x7f40000 0x40000>; /* 256 KB */
+			};
+			partition@7f80000 {
+				label = "Secondary U-Boot";
+				reg = <0x7f80000 0x80000>; /* 512 KB */
+				read-only;
+			};
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/*
+			 * Actual part could be ST Micro NAND08GW3B2A (1 GB),
+			 * Micron MT29F8G08DAA (2x 512 MB), or Micron
+			 * MT29F16G08FAA (2x 1 GB), depending on the build
+			 * configuration
+			 */
+			compatible = "fsl,mpc8572-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <2 0 0x40000>;
+			/* U-Boot should fix this up if chip size > 1 GB */
+			partition@0 {
+				label = "NAND Filesystem";
+				reg = <0 0x40000000>;
+			};
+		};
+
+	};
+
+	soc8572@ef000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8572-immr", "simple-bus";
+		ranges = <0x0 0 0xef000000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8572-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		memory-controller@6000 {
+			compatible = "fsl,mpc8572-memory-controller";
+			reg = <0x6000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8572-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x100000>; // L2, 1M
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			temp-sensor@48 {
+				compatible = "dallas,ds1631", "dallas,ds1621";
+				reg = <0x48>;
+			};
+
+			temp-sensor@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			cpu-supervisor@51 {
+				compatible = "dallas,ds4510";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,at24c128b";
+				reg = <0x54>;
+			};
+
+			rtc@68 {
+				compatible = "stm,m41t00",
+				             "dallas,ds1338";
+				reg = <0x68>;
+			};
+
+			pcie-switch@70 {
+				compatible = "plx,pex8518";
+				reg = <0x70>;
+			};
+
+			gpio1: gpio@18 {
+				compatible = "nxp,pca9557";
+				reg = <0x18>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			gpio2: gpio@1c {
+				compatible = "nxp,pca9557";
+				reg = <0x1c>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			gpio3: gpio@1e {
+				compatible = "nxp,pca9557";
+				reg = <0x1e>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			gpio4: gpio@1f {
+				compatible = "nxp,pca9557";
+				reg = <0x1f>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@c300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0xc300 0x4>;
+			ranges = <0x0 0xc100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <76 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <77 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <78 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <79 2>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		/* eTSEC 1 */
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x1>;
+				};
+				phy1: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x2>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC 2 */
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* UART0 */
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		/* UART1 */
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,mpc8572-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		gpio0: gpio@f000 {
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x1000>;
+			interrupts = <47 2>;
+			interrupt-parent = <&mpic>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&gpio0 4 1>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			yellow {
+				label = "Yellow";
+				gpios = <&gpio0 5 1>;
+			};
+
+			red {
+				label = "Red";
+				gpios = <&gpio0 6 1>;
+			};
+
+			green {
+				label = "Green";
+				gpios = <&gpio0 7 1>;
+			};
+		};
+
+		/* PME (pattern-matcher) */
+		pme@10000 {
+			compatible = "fsl,mpc8572-pme", "pme8572";
+			reg = <0x10000 0x5000>;
+			interrupts = <57 2 64 2 65 2 66 2 67 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		tlu@2f000 {
+			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
+			reg = <0x2f000 0x1000>;
+			interupts = <61 2 >;
+			interrupt-parent = <&mpic>;
+		};
+
+		tlu@15000 {
+			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
+			reg = <0x15000 0x1000>;
+			interupts = <75 2>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+
+	/* PCI Express controller 3 - CompactPCI bus via PEX8112 bridge */
+	pci0: pcie@ef008000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xef008000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0 0xe9000000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+		interrupt-map = <
+			0x0 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x0 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x0 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x0 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0x0 0xe0000000
+				  0x02000000 0x0 0xe0000000
+				  0x0 0x10000000
+
+				  0x01000000 0x0 0x0
+				  0x01000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	/* PCI Express controller 2, PMC module via PEX8112 bridge */
+	pci1: pcie@ef009000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xef009000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0 0xe8800000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x0 0x0 0x0 0x1 &mpic 0x4 0x1
+			0x0 0x0 0x0 0x2 &mpic 0x5 0x1
+			0x0 0x0 0x0 0x3 &mpic 0x6 0x1
+			0x0 0x0 0x0 0x4 &mpic 0x7 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x10000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	/* PCI Express controller 1, XMC P15 */
+	pci2: pcie@ef00a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xef00a000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000
+			  0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x0 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x0 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x0 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x0 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x40000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/xpedite5370.dts b/arch/powerpc/boot/dts/xpedite5370.dts
new file mode 100644
index 00000000000..7a8a4afd56c
--- /dev/null
+++ b/arch/powerpc/boot/dts/xpedite5370.dts
@@ -0,0 +1,638 @@
+/*
+ * Copyright (C) 2008 Extreme Engineering Solutions, Inc.
+ * Based on MPC8572DS device tree from Freescale Semiconductor, Inc.
+ *
+ * XPedite5370 3U VPX single-board computer based on MPC8572E
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+/ {
+	model = "xes,xpedite5370";
+	compatible = "xes,xpedite5370", "xes,MPC8572";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8572@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,8572@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x0>;	// Filled in by U-Boot
+	};
+
+	localbus@ef005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xef005000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+		/* Local bus region mappings */
+		ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Boot flash */
+			  1 0 0 0xf0000000 0x8000000 /* CS1: Alternate flash */
+			  2 0 0 0xef800000 0x40000   /* CS2: NAND CE1 */
+			  3 0 0 0xef840000 0x40000>; /* CS3: NAND CE2 */
+
+		nor-boot@0,0 {
+			compatible = "amd,s29gl01gp", "cfi-flash";
+			bank-width = <2>;
+			reg = <0 0 0x8000000>; /* 128MB */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "Primary user space";
+				reg = <0x00000000 0x6f00000>; /* 111 MB */
+			};
+			partition@6f00000 {
+				label = "Primary kernel";
+				reg = <0x6f00000 0x1000000>; /* 16 MB */
+			};
+			partition@7f00000 {
+				label = "Primary DTB";
+				reg = <0x7f00000 0x40000>; /* 256 KB */
+			};
+			partition@7f40000 {
+				label = "Primary U-Boot environment";
+				reg = <0x7f40000 0x40000>; /* 256 KB */
+			};
+			partition@7f80000 {
+				label = "Primary U-Boot";
+				reg = <0x7f80000 0x80000>; /* 512 KB */
+				read-only;
+			};
+		};
+
+		nor-alternate@1,0 {
+			compatible = "amd,s29gl01gp", "cfi-flash";
+			bank-width = <2>;
+			//reg = <0xf0000000 0x08000000>; /* 128MB */
+			reg = <1 0 0x8000000>; /* 128MB */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "Secondary user space";
+				reg = <0x00000000 0x6f00000>; /* 111 MB */
+			};
+			partition@6f00000 {
+				label = "Secondary kernel";
+				reg = <0x6f00000 0x1000000>; /* 16 MB */
+			};
+			partition@7f00000 {
+				label = "Secondary DTB";
+				reg = <0x7f00000 0x40000>; /* 256 KB */
+			};
+			partition@7f40000 {
+				label = "Secondary U-Boot environment";
+				reg = <0x7f40000 0x40000>; /* 256 KB */
+			};
+			partition@7f80000 {
+				label = "Secondary U-Boot";
+				reg = <0x7f80000 0x80000>; /* 512 KB */
+				read-only;
+			};
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/*
+			 * Actual part could be ST Micro NAND08GW3B2A (1 GB),
+			 * Micron MT29F8G08DAA (2x 512 MB), or Micron
+			 * MT29F16G08FAA (2x 1 GB), depending on the build
+			 * configuration
+			 */
+			compatible = "fsl,mpc8572-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <2 0 0x40000>;
+			/* U-Boot should fix this up if chip size > 1 GB */
+			partition@0 {
+				label = "NAND Filesystem";
+				reg = <0 0x40000000>;
+			};
+		};
+
+	};
+
+	soc8572@ef000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8572-immr", "simple-bus";
+		ranges = <0x0 0 0xef000000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8572-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		memory-controller@6000 {
+			compatible = "fsl,mpc8572-memory-controller";
+			reg = <0x6000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8572-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x100000>; // L2, 1M
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			temp-sensor@48 {
+				compatible = "dallas,ds1631", "dallas,ds1621";
+				reg = <0x48>;
+			};
+
+			temp-sensor@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			cpu-supervisor@51 {
+				compatible = "dallas,ds4510";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,at24c128b";
+				reg = <0x54>;
+			};
+
+			rtc@68 {
+				compatible = "stm,m41t00",
+				             "dallas,ds1338";
+				reg = <0x68>;
+			};
+
+			pcie-switch@70 {
+				compatible = "plx,pex8518";
+				reg = <0x70>;
+			};
+
+			gpio1: gpio@18 {
+				compatible = "nxp,pca9557";
+				reg = <0x18>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			gpio2: gpio@1c {
+				compatible = "nxp,pca9557";
+				reg = <0x1c>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			gpio3: gpio@1e {
+				compatible = "nxp,pca9557";
+				reg = <0x1e>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			gpio4: gpio@1f {
+				compatible = "nxp,pca9557";
+				reg = <0x1f>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@c300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0xc300 0x4>;
+			ranges = <0x0 0xc100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <76 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <77 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <78 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <79 2>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		/* eTSEC 1 */
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x1>;
+				};
+				phy1: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x2>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC 2 */
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* UART0 */
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		/* UART1 */
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,mpc8572-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		gpio0: gpio@f000 {
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x1000>;
+			interrupts = <47 2>;
+			interrupt-parent = <&mpic>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&gpio0 4 1>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			yellow {
+				label = "Yellow";
+				gpios = <&gpio0 5 1>;
+			};
+
+			red {
+				label = "Red";
+				gpios = <&gpio0 6 1>;
+			};
+
+			green {
+				label = "Green";
+				gpios = <&gpio0 7 1>;
+			};
+		};
+
+		/* PME (pattern-matcher) */
+		pme@10000 {
+			compatible = "fsl,mpc8572-pme", "pme8572";
+			reg = <0x10000 0x5000>;
+			interrupts = <57 2 64 2 65 2 66 2 67 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		tlu@2f000 {
+			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
+			reg = <0x2f000 0x1000>;
+			interupts = <61 2 >;
+			interrupt-parent = <&mpic>;
+		};
+
+		tlu@15000 {
+			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
+			reg = <0x15000 0x1000>;
+			interupts = <75 2>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+
+	/*
+	 * PCI Express controller 3 @ ef008000 is not used.
+	 * This would have been pci0 on other mpc85xx platforms.
+	 */
+
+	/* PCI Express controller 2, wired to VPX P1,P2 backplane */
+	pci1: pcie@ef009000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xef009000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0 0xe8800000 0x0 0x00010000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x0 0x0 0x0 0x1 &mpic 0x4 0x1
+			0x0 0x0 0x0 0x2 &mpic 0x5 0x1
+			0x0 0x0 0x0 0x3 &mpic 0x6 0x1
+			0x0 0x0 0x0 0x4 &mpic 0x7 0x1
+			>;
+		pcie@0 {
+			reg = <0x00000000 0x00000000 0x00000000 0x00000000 0x00000000>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x10000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	/* PCI Express controller 1, wired to PEX8518 PCIe switch */
+	pci2: pcie@ef00a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xef00a000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000
+			  0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x0 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x0 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x0 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x0 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x40000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 3ac75aecdb9..4db487d1d2a 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -225,6 +225,10 @@ asp834x-redboot)
     platformo="$object/fixed-head.o $object/redboot-83xx.o"
     binary=y
     ;;
+xpedite52*)
+    link_address='0x1400000'
+    platformo=$object/cuboot-85xx.o
+    ;;
 esac
 
 vmz="$tmpdir/`basename \"$kernel\"`.$ext"
diff --git a/arch/powerpc/configs/83xx/kmeter1_defconfig b/arch/powerpc/configs/83xx/kmeter1_defconfig
new file mode 100644
index 00000000000..bf0853f29f3
--- /dev/null
+++ b/arch/powerpc/configs/83xx/kmeter1_defconfig
@@ -0,0 +1,908 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.28
+# Fri Apr  3 10:34:33 2009
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_PPC_83xx=y
+# CONFIG_MPC831x_RDB is not set
+# CONFIG_MPC832x_MDS is not set
+# CONFIG_MPC832x_RDB is not set
+# CONFIG_MPC834x_MDS is not set
+# CONFIG_MPC834x_ITX is not set
+# CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
+CONFIG_KMETER1=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_IPIC=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+CONFIG_QUICC_ENGINE=y
+# CONFIG_QE_GPIO is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+# CONFIG_SECCOMP is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+CONFIG_MTD_PHRAM=y
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+CONFIG_MTD_UBI_DEBUG=y
+# CONFIG_MTD_UBI_DEBUG_MSG is not set
+# CONFIG_MTD_UBI_DEBUG_PARANOID is not set
+# CONFIG_MTD_UBI_DEBUG_DISABLE_BGT is not set
+# CONFIG_MTD_UBI_DEBUG_USERSPACE_IO is not set
+# CONFIG_MTD_UBI_DEBUG_EMULATE_BITFLIPS is not set
+# CONFIG_MTD_UBI_DEBUG_EMULATE_WRITE_FAILURES is not set
+# CONFIG_MTD_UBI_DEBUG_EMULATE_ERASE_FAILURES is not set
+
+#
+# Additional UBI debugging messages
+#
+# CONFIG_MTD_UBI_DEBUG_MSG_BLD is not set
+# CONFIG_MTD_UBI_DEBUG_MSG_EBA is not set
+# CONFIG_MTD_UBI_DEBUG_MSG_WL is not set
+# CONFIG_MTD_UBI_DEBUG_MSG_IO is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=y
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_GIANFAR is not set
+CONFIG_UCC_GETH=y
+# CONFIG_UGETH_MAGIC_PACKET is not set
+# CONFIG_UGETH_FILTERING is not set
+# CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WAN=y
+CONFIG_HDLC=y
+# CONFIG_HDLC_RAW is not set
+# CONFIG_HDLC_RAW_ETH is not set
+# CONFIG_HDLC_CISCO is not set
+# CONFIG_HDLC_FR is not set
+# CONFIG_HDLC_PPP is not set
+
+#
+# X.25/LAPB support is disabled
+#
+CONFIG_HDLC_KM=y
+CONFIG_FS_UCC_HDLC=y
+# CONFIG_DLCI is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=y
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_QE is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_BOOTCOUNT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_MCU_MPC8349EMITX is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_UBIFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+CONFIG_UCC_FAST=y
+CONFIG_UCC=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
new file mode 100644
index 00000000000..2552cbefba6
--- /dev/null
+++ b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
@@ -0,0 +1,1821 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc6
+# Thu Jun 11 11:25:17 2009
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+CONFIG_PPC_85xx=y
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_GENERIC_TBSYNC=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+# CONFIG_AUDITSYSCALL is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+CONFIG_PPC_MSI_BITMAP=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
+# CONFIG_MPC8540_ADS is not set
+# CONFIG_MPC8560_ADS is not set
+# CONFIG_MPC85xx_CDS is not set
+# CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
+# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
+# CONFIG_KSI8560 is not set
+CONFIG_XES_MPC85xx=y
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_QUICC_ENGINE is not set
+# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_MPC8xxx_GPIO=y
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_FSL_LBC=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+# CONFIG_PCIEASPM is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+CONFIG_ADVANCED_OPTIONS=y
+CONFIG_LOWMEM_SIZE_BOOL=y
+CONFIG_LOWMEM_SIZE=0x40000000
+# CONFIG_LOWMEM_CAM_NUM_BOOL is not set
+CONFIG_LOWMEM_CAM_NUM=3
+# CONFIG_RELOCATABLE is not set
+CONFIG_PAGE_OFFSET_BOOL=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_KERNEL_START_BOOL=y
+CONFIG_KERNEL_START=0x80000000
+# CONFIG_PHYSICAL_START_BOOL is not set
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
+CONFIG_TASK_SIZE_BOOL=y
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+CONFIG_NET_IPGRE=y
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_ARPD=y
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_NAND_FSL_ELBC=y
+CONFIG_MTD_NAND_FSL_UPM=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=131072
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+CONFIG_PATA_ALI=y
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+CONFIG_BROADCOM_PHY=y
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
+CONFIG_GIANFAR=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_NVRAM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+CONFIG_GPIO_PCA953X=y
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+CONFIG_SENSORS_DS1621=y
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+CONFIG_SENSORS_LM90=y
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_BOOKE_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_ISP1760_HCD=y
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+CONFIG_LEDS_GPIO_OF=y
+# CONFIG_LEDS_LP5521 is not set
+CONFIG_LEDS_PCA955X=y
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_MM_EDAC=y
+CONFIG_EDAC_MPC85XX=y
+# CONFIG_EDAC_AMD8131 is not set
+# CONFIG_EDAC_AMD8111 is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_GENERIC is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_FSL_DMA=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/include/asm/delay.h b/arch/powerpc/include/asm/delay.h
index f9200a65c63..1e2eb41fa05 100644
--- a/arch/powerpc/include/asm/delay.h
+++ b/arch/powerpc/include/asm/delay.h
@@ -2,8 +2,11 @@
 #define _ASM_POWERPC_DELAY_H
 #ifdef __KERNEL__
 
+#include <asm/time.h>
+
 /*
  * Copyright 1996, Paul Mackerras.
+ * Copyright (C) 2009 Freescale Semiconductor, Inc. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -30,5 +33,38 @@ extern void udelay(unsigned long usecs);
 #define mdelay(n)	udelay((n) * 1000)
 #endif
 
+/**
+ * spin_event_timeout - spin until a condition gets true or a timeout elapses
+ * @condition: a C expression to evalate
+ * @timeout: timeout, in microseconds
+ * @delay: the number of microseconds to delay between each evaluation of
+ *         @condition
+ *
+ * The process spins until the condition evaluates to true (non-zero) or the
+ * timeout elapses.  The return value of this macro is the value of
+ * @condition when the loop terminates. This allows you to determine the cause
+ * of the loop terminates.  If the return value is zero, then you know a
+ * timeout has occurred.
+ *
+ * This primary purpose of this macro is to poll on a hardware register
+ * until a status bit changes.  The timeout ensures that the loop still
+ * terminates even if the bit never changes.  The delay is for devices that
+ * need a delay in between successive reads.
+ *
+ * gcc will optimize out the if-statement if @delay is a constant.
+ */
+#define spin_event_timeout(condition, timeout, delay)                          \
+({                                                                             \
+	typeof(condition) __ret;                                               \
+	unsigned long __loops = tb_ticks_per_usec * timeout;                   \
+	unsigned long __start = get_tbl();                                     \
+	while (!(__ret = (condition)) && (tb_ticks_since(__start) <= __loops)) \
+		if (delay)                                                     \
+			udelay(delay);                                         \
+		else                                                           \
+			cpu_relax();                                           \
+	__ret;		                                                       \
+})
+
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_DELAY_H */
diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h
index 63a4f779f53..1b5a21041f9 100644
--- a/arch/powerpc/include/asm/fsl_lbc.h
+++ b/arch/powerpc/include/asm/fsl_lbc.h
@@ -95,8 +95,8 @@ struct fsl_lbc_bank {
 };
 
 struct fsl_lbc_regs {
-	struct fsl_lbc_bank bank[8];
-	u8 res0[0x28];
+	struct fsl_lbc_bank bank[12];
+	u8 res0[0x8];
 	__be32 mar;             /**< UPM Address Register */
 	u8 res1[0x4];
 	__be32 mamr;            /**< UPMA Mode Register */
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index b7f8f4a87cc..867ab8ed69b 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -131,6 +131,8 @@ static inline int irqs_disabled_flags(unsigned long flags)
 struct irq_chip;
 
 #ifdef CONFIG_PERF_COUNTERS
+
+#ifdef CONFIG_PPC64
 static inline unsigned long test_perf_counter_pending(void)
 {
 	unsigned long x;
@@ -154,15 +156,15 @@ static inline void clear_perf_counter_pending(void)
 		"r" (0),
 		"i" (offsetof(struct paca_struct, perf_counter_pending)));
 }
+#endif /* CONFIG_PPC64 */
 
-#else
+#else  /* CONFIG_PERF_COUNTERS */
 
 static inline unsigned long test_perf_counter_pending(void)
 {
 	return 0;
 }
 
-static inline void set_perf_counter_pending(void) {}
 static inline void clear_perf_counter_pending(void) {}
 #endif /* CONFIG_PERF_COUNTERS */
 
diff --git a/arch/powerpc/include/asm/mpc52xx.h b/arch/powerpc/include/asm/mpc52xx.h
index 52e049cd9e6..1b4f697abbd 100644
--- a/arch/powerpc/include/asm/mpc52xx.h
+++ b/arch/powerpc/include/asm/mpc52xx.h
@@ -16,6 +16,7 @@
 #ifndef __ASSEMBLY__
 #include <asm/types.h>
 #include <asm/prom.h>
+#include <asm/mpc5xxx.h>
 #endif /* __ASSEMBLY__ */
 
 #include <linux/suspend.h>
@@ -268,7 +269,6 @@ struct mpc52xx_intr {
 #ifndef __ASSEMBLY__
 
 /* mpc52xx_common.c */
-extern unsigned int mpc52xx_find_ipb_freq(struct device_node *node);
 extern void mpc5200_setup_xlb_arbiter(void);
 extern void mpc52xx_declare_of_platform_devices(void);
 extern void mpc52xx_map_common_devices(void);
diff --git a/arch/powerpc/include/asm/mpc512x.h b/arch/powerpc/include/asm/mpc5xxx.h
index c48a1658eea..5ce9c5fa434 100644
--- a/arch/powerpc/include/asm/mpc512x.h
+++ b/arch/powerpc/include/asm/mpc5xxx.h
@@ -4,7 +4,7 @@
  * Author: John Rigby, <jrigby@freescale.com>, Friday Apr 13 2007
  *
  * Description:
- * MPC5121 Prototypes and definitions
+ * MPC5xxx Prototypes and definitions
  *
  * This is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by
@@ -13,10 +13,10 @@
  *
  */
 
-#ifndef __ASM_POWERPC_MPC512x_H__
-#define __ASM_POWERPC_MPC512x_H__
+#ifndef __ASM_POWERPC_MPC5xxx_H__
+#define __ASM_POWERPC_MPC5xxx_H__
 
-extern unsigned long mpc512x_find_ips_freq(struct device_node *node);
+extern unsigned long mpc5xxx_get_bus_frequency(struct device_node *node);
 
-#endif /* __ASM_POWERPC_MPC512x_H__ */
+#endif /* __ASM_POWERPC_MPC5xxx_H__ */
 
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index ba17d5d90a4..d9483c504d2 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -195,19 +195,6 @@ extern void pcibios_bus_to_resource(struct pci_dev *dev,
 			struct resource *res,
 			struct pci_bus_region *region);
 
-static inline struct resource *pcibios_select_root(struct pci_dev *pdev,
-			struct resource *res)
-{
-	struct resource *root = NULL;
-
-	if (res->flags & IORESOURCE_IO)
-		root = &ioport_resource;
-	if (res->flags & IORESOURCE_MEM)
-		root = &iomem_resource;
-
-	return root;
-}
-
 extern void pcibios_claim_one_bus(struct pci_bus *b);
 
 extern void pcibios_finish_adding_to_bus(struct pci_bus *bus);
diff --git a/arch/powerpc/include/asm/perf_counter.h b/arch/powerpc/include/asm/perf_counter.h
index cc7c887705b..8ccd4e15576 100644
--- a/arch/powerpc/include/asm/perf_counter.h
+++ b/arch/powerpc/include/asm/perf_counter.h
@@ -10,6 +10,8 @@
  */
 #include <linux/types.h>
 
+#include <asm/hw_irq.h>
+
 #define MAX_HWCOUNTERS		8
 #define MAX_EVENT_ALTERNATIVES	8
 #define MAX_LIMITED_HWCOUNTERS	2
@@ -19,27 +21,27 @@
  * describe the PMU on a particular POWER-family CPU.
  */
 struct power_pmu {
-	int	n_counter;
-	int	max_alternatives;
-	u64	add_fields;
-	u64	test_adder;
-	int	(*compute_mmcr)(u64 events[], int n_ev,
-				unsigned int hwc[], u64 mmcr[]);
-	int	(*get_constraint)(u64 event, u64 *mskp, u64 *valp);
-	int	(*get_alternatives)(u64 event, unsigned int flags,
-				    u64 alt[]);
-	void	(*disable_pmc)(unsigned int pmc, u64 mmcr[]);
-	int	(*limited_pmc_event)(u64 event);
-	u32	flags;
-	int	n_generic;
-	int	*generic_events;
-	int	(*cache_events)[PERF_COUNT_HW_CACHE_MAX]
+	const char	*name;
+	int		n_counter;
+	int		max_alternatives;
+	unsigned long	add_fields;
+	unsigned long	test_adder;
+	int		(*compute_mmcr)(u64 events[], int n_ev,
+				unsigned int hwc[], unsigned long mmcr[]);
+	int		(*get_constraint)(u64 event, unsigned long *mskp,
+				unsigned long *valp);
+	int		(*get_alternatives)(u64 event, unsigned int flags,
+				u64 alt[]);
+	void		(*disable_pmc)(unsigned int pmc, unsigned long mmcr[]);
+	int		(*limited_pmc_event)(u64 event);
+	u32		flags;
+	int		n_generic;
+	int		*generic_events;
+	int		(*cache_events)[PERF_COUNT_HW_CACHE_MAX]
 			       [PERF_COUNT_HW_CACHE_OP_MAX]
 			       [PERF_COUNT_HW_CACHE_RESULT_MAX];
 };
 
-extern struct power_pmu *ppmu;
-
 /*
  * Values for power_pmu.flags
  */
@@ -53,15 +55,23 @@ extern struct power_pmu *ppmu;
 #define PPMU_LIMITED_PMC_REQD	2	/* have to put this on a limited PMC */
 #define PPMU_ONLY_COUNT_RUN	4	/* only counting in run state */
 
+extern int register_power_pmu(struct power_pmu *);
+
 struct pt_regs;
 extern unsigned long perf_misc_flags(struct pt_regs *regs);
-#define perf_misc_flags(regs)	perf_misc_flags(regs)
-
 extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
 
 /*
- * The power_pmu.get_constraint function returns a 64-bit value and
- * a 64-bit mask that express the constraints between this event and
+ * Only override the default definitions in include/linux/perf_counter.h
+ * if we have hardware PMU support.
+ */
+#ifdef CONFIG_PPC_PERF_CTRS
+#define perf_misc_flags(regs)	perf_misc_flags(regs)
+#endif
+
+/*
+ * The power_pmu.get_constraint function returns a 32/64-bit value and
+ * a 32/64-bit mask that express the constraints between this event and
  * other events.
  *
  * The value and mask are divided up into (non-overlapping) bitfields
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index a3c28e46947..1170267736d 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -755,7 +755,8 @@
 #define mfspr(rn)	({unsigned long rval; \
 			asm volatile("mfspr %0," __stringify(rn) \
 				: "=r" (rval)); rval;})
-#define mtspr(rn, v)	asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v))
+#define mtspr(rn, v)	asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v)\
+				     : "memory")
 
 #ifdef __powerpc64__
 #ifdef CONFIG_PPC_CELL
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 601ddbc4600..6bcf364cbb2 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -389,12 +389,14 @@
 #define ICCR_CACHE	1		/* Cacheable */
 
 /* Bit definitions for L1CSR0. */
+#define L1CSR0_CPE	0x00010000	/* Data Cache Parity Enable */
 #define L1CSR0_CLFC	0x00000100	/* Cache Lock Bits Flash Clear */
 #define L1CSR0_DCFI	0x00000002	/* Data Cache Flash Invalidate */
 #define L1CSR0_CFI	0x00000002	/* Cache Flash Invalidate */
 #define L1CSR0_DCE	0x00000001	/* Data Cache Enable */
 
 /* Bit definitions for L1CSR1. */
+#define L1CSR1_CPE	0x00010000	/* Instruction Cache Parity Enable */
 #define L1CSR1_ICLFR	0x00000100	/* Instr Cache Lock Bits Flash Reset */
 #define L1CSR1_ICFI	0x00000002	/* Instr Cache Flash Invalidate */
 #define L1CSR1_ICE	0x00000001	/* Instr Cache Enable */
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 612b0c4dc26..b73396b9390 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -4,6 +4,8 @@
 
 CFLAGS_ptrace.o		+= -DUTS_MACHINE='"$(UTS_MACHINE)"'
 
+subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
+
 ifeq ($(CONFIG_PPC64),y)
 CFLAGS_prom_init.o	+= -mno-minimal-toc
 endif
@@ -95,9 +97,10 @@ obj64-$(CONFIG_AUDIT)		+= compat_audit.o
 
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
-obj-$(CONFIG_PERF_COUNTERS)	+= perf_counter.o power4-pmu.o ppc970-pmu.o \
-				   power5-pmu.o power5+-pmu.o power6-pmu.o \
-				   power7-pmu.o
+obj-$(CONFIG_PPC_PERF_CTRS)	+= perf_counter.o
+obj64-$(CONFIG_PPC_PERF_CTRS)	+= power4-pmu.o ppc970-pmu.o power5-pmu.o \
+				   power5+-pmu.o power6-pmu.o power7-pmu.o
+obj32-$(CONFIG_PPC_PERF_CTRS)	+= mpc7450-pmu.o
 
 obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o
 
@@ -106,6 +109,7 @@ obj-y				+= iomap.o
 endif
 
 obj-$(CONFIG_PPC64)		+= $(obj64-y)
+obj-$(CONFIG_PPC32)		+= $(obj32-y)
 
 ifneq ($(CONFIG_XMON)$(CONFIG_KEXEC),)
 obj-y				+= ppc_save_regs.o
diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S
index 54f767e31a1..1e9949e6885 100644
--- a/arch/powerpc/kernel/cpu_setup_6xx.S
+++ b/arch/powerpc/kernel/cpu_setup_6xx.S
@@ -239,6 +239,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_L3CR)
 	ori	r11,r11,HID0_SGE | HID0_FOLD | HID0_BHTE
 	ori	r11,r11,HID0_LRSTK | HID0_BTIC
 	oris	r11,r11,HID0_DPM@h
+BEGIN_MMU_FTR_SECTION
+	oris	r11,r11,HID0_HIGH_BAT@h
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
 BEGIN_FTR_SECTION
 	xori	r11,r11,HID0_BTIC
 END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC)
diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
index eb4b9adcedb..0adb50ad803 100644
--- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S
+++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
@@ -17,6 +17,40 @@
 #include <asm/cputable.h>
 #include <asm/ppc_asm.h>
 
+_GLOBAL(__e500_icache_setup)
+	mfspr	r0, SPRN_L1CSR1
+	andi.	r3, r0, L1CSR1_ICE
+	bnelr				/* Already enabled */
+	oris	r0, r0, L1CSR1_CPE@h
+	ori	r0, r0, (L1CSR1_ICFI | L1CSR1_ICLFR |  L1CSR1_ICE)
+	mtspr	SPRN_L1CSR1, r0		/* Enable I-Cache */
+	isync
+	blr
+
+_GLOBAL(__e500_dcache_setup)
+	mfspr	r0, SPRN_L1CSR0
+	andi.	r3, r0, L1CSR0_DCE
+	bnelr				/* Already enabled */
+	msync
+	isync
+	li	r0, 0
+	mtspr	SPRN_L1CSR0, r0		/* Disable */
+	msync
+	isync
+	li	r0, (L1CSR0_DCFI | L1CSR0_CLFC)
+	mtspr	SPRN_L1CSR0, r0		/* Invalidate */
+	isync
+1:	mfspr	r0, SPRN_L1CSR0
+	andi.	r3, r0, L1CSR0_CLFC
+	bne+	1b			/* Wait for lock bits reset */
+	oris	r0, r0, L1CSR0_CPE@h
+	ori	r0, r0, L1CSR0_DCE
+	msync
+	isync
+	mtspr	SPRN_L1CSR0, r0		/* Enable */
+	isync
+	blr
+
 _GLOBAL(__setup_cpu_e200)
 	/* enable dedicated debug exception handling resources (Debug APU) */
 	mfspr	r3,SPRN_HID0
@@ -25,7 +59,16 @@ _GLOBAL(__setup_cpu_e200)
 	b	__setup_e200_ivors
 _GLOBAL(__setup_cpu_e500v1)
 _GLOBAL(__setup_cpu_e500v2)
-	b	__setup_e500_ivors
+	mflr	r4
+	bl	__e500_icache_setup
+	bl	__e500_dcache_setup
+	bl	__setup_e500_ivors
+	mtlr	r4
+	blr
 _GLOBAL(__setup_cpu_e500mc)
-	b	__setup_e500mc_ivors
-
+	mflr	r4
+	bl	__e500_icache_setup
+	bl	__e500_dcache_setup
+	bl	__setup_e500mc_ivors
+	mtlr	r4
+	blr
diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c
index 1b12696cca0..ce1f3e44c24 100644
--- a/arch/powerpc/kernel/ftrace.c
+++ b/arch/powerpc/kernel/ftrace.c
@@ -586,7 +586,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 		return;
 	}
 
-	if (ftrace_push_return_trace(old, self_addr, &trace.depth) == -EBUSY) {
+	if (ftrace_push_return_trace(old, self_addr, &trace.depth, 0) == -EBUSY) {
 		*parent = old;
 		return;
 	}
diff --git a/arch/powerpc/kernel/mpc7450-pmu.c b/arch/powerpc/kernel/mpc7450-pmu.c
new file mode 100644
index 00000000000..75ff47fed7b
--- /dev/null
+++ b/arch/powerpc/kernel/mpc7450-pmu.c
@@ -0,0 +1,417 @@
+/*
+ * Performance counter support for MPC7450-family processors.
+ *
+ * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/string.h>
+#include <linux/perf_counter.h>
+#include <linux/string.h>
+#include <asm/reg.h>
+#include <asm/cputable.h>
+
+#define N_COUNTER	6	/* Number of hardware counters */
+#define MAX_ALT		3	/* Maximum number of event alternative codes */
+
+/*
+ * Bits in event code for MPC7450 family
+ */
+#define PM_THRMULT_MSKS	0x40000
+#define PM_THRESH_SH	12
+#define PM_THRESH_MSK	0x3f
+#define PM_PMC_SH	8
+#define PM_PMC_MSK	7
+#define PM_PMCSEL_MSK	0x7f
+
+/*
+ * Classify events according to how specific their PMC requirements are.
+ * Result is:
+ *	0: can go on any PMC
+ *	1: can go on PMCs 1-4
+ *	2: can go on PMCs 1,2,4
+ *	3: can go on PMCs 1 or 2
+ *	4: can only go on one PMC
+ *	-1: event code is invalid
+ */
+#define N_CLASSES	5
+
+static int mpc7450_classify_event(u32 event)
+{
+	int pmc;
+
+	pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
+	if (pmc) {
+		if (pmc > N_COUNTER)
+			return -1;
+		return 4;
+	}
+	event &= PM_PMCSEL_MSK;
+	if (event <= 1)
+		return 0;
+	if (event <= 7)
+		return 1;
+	if (event <= 13)
+		return 2;
+	if (event <= 22)
+		return 3;
+	return -1;
+}
+
+/*
+ * Events using threshold and possible threshold scale:
+ *	code	scale?	name
+ *	11e	N	PM_INSTQ_EXCEED_CYC
+ *	11f	N	PM_ALTV_IQ_EXCEED_CYC
+ *	128	Y	PM_DTLB_SEARCH_EXCEED_CYC
+ *	12b	Y	PM_LD_MISS_EXCEED_L1_CYC
+ *	220	N	PM_CQ_EXCEED_CYC
+ *	30c	N	PM_GPR_RB_EXCEED_CYC
+ *	30d	?	PM_FPR_IQ_EXCEED_CYC ?
+ *	311	Y	PM_ITLB_SEARCH_EXCEED
+ *	410	N	PM_GPR_IQ_EXCEED_CYC
+ */
+
+/*
+ * Return use of threshold and threshold scale bits:
+ * 0 = uses neither, 1 = uses threshold, 2 = uses both
+ */
+static int mpc7450_threshold_use(u32 event)
+{
+	int pmc, sel;
+
+	pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
+	sel = event & PM_PMCSEL_MSK;
+	switch (pmc) {
+	case 1:
+		if (sel == 0x1e || sel == 0x1f)
+			return 1;
+		if (sel == 0x28 || sel == 0x2b)
+			return 2;
+		break;
+	case 2:
+		if (sel == 0x20)
+			return 1;
+		break;
+	case 3:
+		if (sel == 0xc || sel == 0xd)
+			return 1;
+		if (sel == 0x11)
+			return 2;
+		break;
+	case 4:
+		if (sel == 0x10)
+			return 1;
+		break;
+	}
+	return 0;
+}
+
+/*
+ * Layout of constraint bits:
+ * 33222222222211111111110000000000
+ * 10987654321098765432109876543210
+ *  |<    ><  > < > < ><><><><><><>
+ *  TS TV   G4   G3  G2P6P5P4P3P2P1
+ *
+ * P1 - P6
+ *	0 - 11: Count of events needing PMC1 .. PMC6
+ *
+ * G2
+ *	12 - 14: Count of events needing PMC1 or PMC2
+ *
+ * G3
+ *	16 - 18: Count of events needing PMC1, PMC2 or PMC4
+ *
+ * G4
+ *	20 - 23: Count of events needing PMC1, PMC2, PMC3 or PMC4
+ *
+ * TV
+ *	24 - 29: Threshold value requested
+ *
+ * TS
+ *	30: Threshold scale value requested
+ */
+
+static u32 pmcbits[N_COUNTER][2] = {
+	{ 0x00844002, 0x00111001 },	/* PMC1 mask, value: P1,G2,G3,G4 */
+	{ 0x00844008, 0x00111004 },	/* PMC2: P2,G2,G3,G4 */
+	{ 0x00800020, 0x00100010 },	/* PMC3: P3,G4 */
+	{ 0x00840080, 0x00110040 },	/* PMC4: P4,G3,G4 */
+	{ 0x00000200, 0x00000100 },	/* PMC5: P5 */
+	{ 0x00000800, 0x00000400 }	/* PMC6: P6 */
+};
+
+static u32 classbits[N_CLASSES - 1][2] = {
+	{ 0x00000000, 0x00000000 },	/* class 0: no constraint */
+	{ 0x00800000, 0x00100000 },	/* class 1: G4 */
+	{ 0x00040000, 0x00010000 },	/* class 2: G3 */
+	{ 0x00004000, 0x00001000 },	/* class 3: G2 */
+};
+
+static int mpc7450_get_constraint(u64 event, unsigned long *maskp,
+				  unsigned long *valp)
+{
+	int pmc, class;
+	u32 mask, value;
+	int thresh, tuse;
+
+	class = mpc7450_classify_event(event);
+	if (class < 0)
+		return -1;
+	if (class == 4) {
+		pmc = ((unsigned int)event >> PM_PMC_SH) & PM_PMC_MSK;
+		mask  = pmcbits[pmc - 1][0];
+		value = pmcbits[pmc - 1][1];
+	} else {
+		mask  = classbits[class][0];
+		value = classbits[class][1];
+	}
+
+	tuse = mpc7450_threshold_use(event);
+	if (tuse) {
+		thresh = ((unsigned int)event >> PM_THRESH_SH) & PM_THRESH_MSK;
+		mask  |= 0x3f << 24;
+		value |= thresh << 24;
+		if (tuse == 2) {
+			mask |= 0x40000000;
+			if ((unsigned int)event & PM_THRMULT_MSKS)
+				value |= 0x40000000;
+		}
+	}
+
+	*maskp = mask;
+	*valp = value;
+	return 0;
+}
+
+static const unsigned int event_alternatives[][MAX_ALT] = {
+	{ 0x217, 0x317 },		/* PM_L1_DCACHE_MISS */
+	{ 0x418, 0x50f, 0x60f },	/* PM_SNOOP_RETRY */
+	{ 0x502, 0x602 },		/* PM_L2_HIT */
+	{ 0x503, 0x603 },		/* PM_L3_HIT */
+	{ 0x504, 0x604 },		/* PM_L2_ICACHE_MISS */
+	{ 0x505, 0x605 },		/* PM_L3_ICACHE_MISS */
+	{ 0x506, 0x606 },		/* PM_L2_DCACHE_MISS */
+	{ 0x507, 0x607 },		/* PM_L3_DCACHE_MISS */
+	{ 0x50a, 0x623 },		/* PM_LD_HIT_L3 */
+	{ 0x50b, 0x624 },		/* PM_ST_HIT_L3 */
+	{ 0x50d, 0x60d },		/* PM_L2_TOUCH_HIT */
+	{ 0x50e, 0x60e },		/* PM_L3_TOUCH_HIT */
+	{ 0x512, 0x612 },		/* PM_INT_LOCAL */
+	{ 0x513, 0x61d },		/* PM_L2_MISS */
+	{ 0x514, 0x61e },		/* PM_L3_MISS */
+};
+
+/*
+ * Scan the alternatives table for a match and return the
+ * index into the alternatives table if found, else -1.
+ */
+static int find_alternative(u32 event)
+{
+	int i, j;
+
+	for (i = 0; i < ARRAY_SIZE(event_alternatives); ++i) {
+		if (event < event_alternatives[i][0])
+			break;
+		for (j = 0; j < MAX_ALT && event_alternatives[i][j]; ++j)
+			if (event == event_alternatives[i][j])
+				return i;
+	}
+	return -1;
+}
+
+static int mpc7450_get_alternatives(u64 event, unsigned int flags, u64 alt[])
+{
+	int i, j, nalt = 1;
+	u32 ae;
+
+	alt[0] = event;
+	nalt = 1;
+	i = find_alternative((u32)event);
+	if (i >= 0) {
+		for (j = 0; j < MAX_ALT; ++j) {
+			ae = event_alternatives[i][j];
+			if (ae && ae != (u32)event)
+				alt[nalt++] = ae;
+		}
+	}
+	return nalt;
+}
+
+/*
+ * Bitmaps of which PMCs each class can use for classes 0 - 3.
+ * Bit i is set if PMC i+1 is usable.
+ */
+static const u8 classmap[N_CLASSES] = {
+	0x3f, 0x0f, 0x0b, 0x03, 0
+};
+
+/* Bit position and width of each PMCSEL field */
+static const int pmcsel_shift[N_COUNTER] = {
+	6,	0,	27,	22,	17,	11
+};
+static const u32 pmcsel_mask[N_COUNTER] = {
+	0x7f,	0x3f,	0x1f,	0x1f,	0x1f,	0x3f
+};
+
+/*
+ * Compute MMCR0/1/2 values for a set of events.
+ */
+static int mpc7450_compute_mmcr(u64 event[], int n_ev,
+				unsigned int hwc[], unsigned long mmcr[])
+{
+	u8 event_index[N_CLASSES][N_COUNTER];
+	int n_classevent[N_CLASSES];
+	int i, j, class, tuse;
+	u32 pmc_inuse = 0, pmc_avail;
+	u32 mmcr0 = 0, mmcr1 = 0, mmcr2 = 0;
+	u32 ev, pmc, thresh;
+
+	if (n_ev > N_COUNTER)
+		return -1;
+
+	/* First pass: count usage in each class */
+	for (i = 0; i < N_CLASSES; ++i)
+		n_classevent[i] = 0;
+	for (i = 0; i < n_ev; ++i) {
+		class = mpc7450_classify_event(event[i]);
+		if (class < 0)
+			return -1;
+		j = n_classevent[class]++;
+		event_index[class][j] = i;
+	}
+
+	/* Second pass: allocate PMCs from most specific event to least */
+	for (class = N_CLASSES - 1; class >= 0; --class) {
+		for (i = 0; i < n_classevent[class]; ++i) {
+			ev = event[event_index[class][i]];
+			if (class == 4) {
+				pmc = (ev >> PM_PMC_SH) & PM_PMC_MSK;
+				if (pmc_inuse & (1 << (pmc - 1)))
+					return -1;
+			} else {
+				/* Find a suitable PMC */
+				pmc_avail = classmap[class] & ~pmc_inuse;
+				if (!pmc_avail)
+					return -1;
+				pmc = ffs(pmc_avail);
+			}
+			pmc_inuse |= 1 << (pmc - 1);
+
+			tuse = mpc7450_threshold_use(ev);
+			if (tuse) {
+				thresh = (ev >> PM_THRESH_SH) & PM_THRESH_MSK;
+				mmcr0 |= thresh << 16;
+				if (tuse == 2 && (ev & PM_THRMULT_MSKS))
+					mmcr2 = 0x80000000;
+			}
+			ev &= pmcsel_mask[pmc - 1];
+			ev <<= pmcsel_shift[pmc - 1];
+			if (pmc <= 2)
+				mmcr0 |= ev;
+			else
+				mmcr1 |= ev;
+			hwc[event_index[class][i]] = pmc - 1;
+		}
+	}
+
+	if (pmc_inuse & 1)
+		mmcr0 |= MMCR0_PMC1CE;
+	if (pmc_inuse & 0x3e)
+		mmcr0 |= MMCR0_PMCnCE;
+
+	/* Return MMCRx values */
+	mmcr[0] = mmcr0;
+	mmcr[1] = mmcr1;
+	mmcr[2] = mmcr2;
+	return 0;
+}
+
+/*
+ * Disable counting by a PMC.
+ * Note that the pmc argument is 0-based here, not 1-based.
+ */
+static void mpc7450_disable_pmc(unsigned int pmc, unsigned long mmcr[])
+{
+	if (pmc <= 1)
+		mmcr[0] &= ~(pmcsel_mask[pmc] << pmcsel_shift[pmc]);
+	else
+		mmcr[1] &= ~(pmcsel_mask[pmc] << pmcsel_shift[pmc]);
+}
+
+static int mpc7450_generic_events[] = {
+	[PERF_COUNT_HW_CPU_CYCLES]		= 1,
+	[PERF_COUNT_HW_INSTRUCTIONS]		= 2,
+	[PERF_COUNT_HW_CACHE_MISSES]		= 0x217, /* PM_L1_DCACHE_MISS */
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x122, /* PM_BR_CMPL */
+	[PERF_COUNT_HW_BRANCH_MISSES] 		= 0x41c, /* PM_BR_MPRED */
+};
+
+#define C(x)	PERF_COUNT_HW_CACHE_##x
+
+/*
+ * Table of generalized cache-related events.
+ * 0 means not supported, -1 means nonsensical, other values
+ * are event codes.
+ */
+static int mpc7450_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+	[C(L1D)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0,		0x225	},
+		[C(OP_WRITE)] = {	0,		0x227	},
+		[C(OP_PREFETCH)] = {	0,		0	},
+	},
+	[C(L1I)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0x129,		0x115	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	0x634,		0	},
+	},
+	[C(LL)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0,		0	},
+		[C(OP_WRITE)] = {	0,		0	},
+		[C(OP_PREFETCH)] = {	0,		0	},
+	},
+	[C(DTLB)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0,		0x312	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+	[C(ITLB)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0,		0x223	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+	[C(BPU)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0x122,		0x41c	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+};
+
+struct power_pmu mpc7450_pmu = {
+	.name			= "MPC7450 family",
+	.n_counter		= N_COUNTER,
+	.max_alternatives	= MAX_ALT,
+	.add_fields		= 0x00111555ul,
+	.test_adder		= 0x00301000ul,
+	.compute_mmcr		= mpc7450_compute_mmcr,
+	.get_constraint		= mpc7450_get_constraint,
+	.get_alternatives	= mpc7450_get_alternatives,
+	.disable_pmc		= mpc7450_disable_pmc,
+	.n_generic		= ARRAY_SIZE(mpc7450_generic_events),
+	.generic_events		= mpc7450_generic_events,
+	.cache_events		= &mpc7450_cache_events,
+};
+
+static int init_mpc7450_pmu(void)
+{
+	if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/7450"))
+		return -ENODEV;
+
+	return register_power_pmu(&mpc7450_pmu);
+}
+
+arch_initcall(init_mpc7450_pmu);
diff --git a/arch/powerpc/kernel/perf_counter.c b/arch/powerpc/kernel/perf_counter.c
index bb202388170..809fdf94b95 100644
--- a/arch/powerpc/kernel/perf_counter.c
+++ b/arch/powerpc/kernel/perf_counter.c
@@ -29,7 +29,7 @@ struct cpu_hw_counters {
 	struct perf_counter *counter[MAX_HWCOUNTERS];
 	u64 events[MAX_HWCOUNTERS];
 	unsigned int flags[MAX_HWCOUNTERS];
-	u64 mmcr[3];
+	unsigned long mmcr[3];
 	struct perf_counter *limited_counter[MAX_LIMITED_HWCOUNTERS];
 	u8  limited_hwidx[MAX_LIMITED_HWCOUNTERS];
 };
@@ -46,6 +46,115 @@ struct power_pmu *ppmu;
  */
 static unsigned int freeze_counters_kernel = MMCR0_FCS;
 
+/*
+ * 32-bit doesn't have MMCRA but does have an MMCR2,
+ * and a few other names are different.
+ */
+#ifdef CONFIG_PPC32
+
+#define MMCR0_FCHV		0
+#define MMCR0_PMCjCE		MMCR0_PMCnCE
+
+#define SPRN_MMCRA		SPRN_MMCR2
+#define MMCRA_SAMPLE_ENABLE	0
+
+static inline unsigned long perf_ip_adjust(struct pt_regs *regs)
+{
+	return 0;
+}
+static inline void perf_set_pmu_inuse(int inuse) { }
+static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp) { }
+static inline u32 perf_get_misc_flags(struct pt_regs *regs)
+{
+	return 0;
+}
+static inline void perf_read_regs(struct pt_regs *regs) { }
+static inline int perf_intr_is_nmi(struct pt_regs *regs)
+{
+	return 0;
+}
+
+#endif /* CONFIG_PPC32 */
+
+/*
+ * Things that are specific to 64-bit implementations.
+ */
+#ifdef CONFIG_PPC64
+
+static inline unsigned long perf_ip_adjust(struct pt_regs *regs)
+{
+	unsigned long mmcra = regs->dsisr;
+
+	if ((mmcra & MMCRA_SAMPLE_ENABLE) && !(ppmu->flags & PPMU_ALT_SIPR)) {
+		unsigned long slot = (mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT;
+		if (slot > 1)
+			return 4 * (slot - 1);
+	}
+	return 0;
+}
+
+static inline void perf_set_pmu_inuse(int inuse)
+{
+	get_lppaca()->pmcregs_in_use = inuse;
+}
+
+/*
+ * The user wants a data address recorded.
+ * If we're not doing instruction sampling, give them the SDAR
+ * (sampled data address).  If we are doing instruction sampling, then
+ * only give them the SDAR if it corresponds to the instruction
+ * pointed to by SIAR; this is indicated by the [POWER6_]MMCRA_SDSYNC
+ * bit in MMCRA.
+ */
+static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp)
+{
+	unsigned long mmcra = regs->dsisr;
+	unsigned long sdsync = (ppmu->flags & PPMU_ALT_SIPR) ?
+		POWER6_MMCRA_SDSYNC : MMCRA_SDSYNC;
+
+	if (!(mmcra & MMCRA_SAMPLE_ENABLE) || (mmcra & sdsync))
+		*addrp = mfspr(SPRN_SDAR);
+}
+
+static inline u32 perf_get_misc_flags(struct pt_regs *regs)
+{
+	unsigned long mmcra = regs->dsisr;
+
+	if (TRAP(regs) != 0xf00)
+		return 0;	/* not a PMU interrupt */
+
+	if (ppmu->flags & PPMU_ALT_SIPR) {
+		if (mmcra & POWER6_MMCRA_SIHV)
+			return PERF_EVENT_MISC_HYPERVISOR;
+		return (mmcra & POWER6_MMCRA_SIPR) ?
+			PERF_EVENT_MISC_USER : PERF_EVENT_MISC_KERNEL;
+	}
+	if (mmcra & MMCRA_SIHV)
+		return PERF_EVENT_MISC_HYPERVISOR;
+	return (mmcra & MMCRA_SIPR) ? PERF_EVENT_MISC_USER :
+		PERF_EVENT_MISC_KERNEL;
+}
+
+/*
+ * Overload regs->dsisr to store MMCRA so we only need to read it once
+ * on each interrupt.
+ */
+static inline void perf_read_regs(struct pt_regs *regs)
+{
+	regs->dsisr = mfspr(SPRN_MMCRA);
+}
+
+/*
+ * If interrupts were soft-disabled when a PMU interrupt occurs, treat
+ * it as an NMI.
+ */
+static inline int perf_intr_is_nmi(struct pt_regs *regs)
+{
+	return !regs->softe;
+}
+
+#endif /* CONFIG_PPC64 */
+
 static void perf_counter_interrupt(struct pt_regs *regs);
 
 void perf_counter_print_debug(void)
@@ -78,12 +187,14 @@ static unsigned long read_pmc(int idx)
 	case 6:
 		val = mfspr(SPRN_PMC6);
 		break;
+#ifdef CONFIG_PPC64
 	case 7:
 		val = mfspr(SPRN_PMC7);
 		break;
 	case 8:
 		val = mfspr(SPRN_PMC8);
 		break;
+#endif /* CONFIG_PPC64 */
 	default:
 		printk(KERN_ERR "oops trying to read PMC%d\n", idx);
 		val = 0;
@@ -115,12 +226,14 @@ static void write_pmc(int idx, unsigned long val)
 	case 6:
 		mtspr(SPRN_PMC6, val);
 		break;
+#ifdef CONFIG_PPC64
 	case 7:
 		mtspr(SPRN_PMC7, val);
 		break;
 	case 8:
 		mtspr(SPRN_PMC8, val);
 		break;
+#endif /* CONFIG_PPC64 */
 	default:
 		printk(KERN_ERR "oops trying to write PMC%d\n", idx);
 	}
@@ -135,15 +248,15 @@ static void write_pmc(int idx, unsigned long val)
 static int power_check_constraints(u64 event[], unsigned int cflags[],
 				   int n_ev)
 {
-	u64 mask, value, nv;
+	unsigned long mask, value, nv;
 	u64 alternatives[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
-	u64 amasks[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
-	u64 avalues[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
-	u64 smasks[MAX_HWCOUNTERS], svalues[MAX_HWCOUNTERS];
+	unsigned long amasks[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
+	unsigned long avalues[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
+	unsigned long smasks[MAX_HWCOUNTERS], svalues[MAX_HWCOUNTERS];
 	int n_alt[MAX_HWCOUNTERS], choice[MAX_HWCOUNTERS];
 	int i, j;
-	u64 addf = ppmu->add_fields;
-	u64 tadd = ppmu->test_adder;
+	unsigned long addf = ppmu->add_fields;
+	unsigned long tadd = ppmu->test_adder;
 
 	if (n_ev > ppmu->n_counter)
 		return -1;
@@ -283,7 +396,7 @@ static int check_excludes(struct perf_counter **ctrs, unsigned int cflags[],
 
 static void power_pmu_read(struct perf_counter *counter)
 {
-	long val, delta, prev;
+	s64 val, delta, prev;
 
 	if (!counter->hw.idx)
 		return;
@@ -403,14 +516,12 @@ static void write_mmcr0(struct cpu_hw_counters *cpuhw, unsigned long mmcr0)
 void hw_perf_disable(void)
 {
 	struct cpu_hw_counters *cpuhw;
-	unsigned long ret;
 	unsigned long flags;
 
 	local_irq_save(flags);
 	cpuhw = &__get_cpu_var(cpu_hw_counters);
 
-	ret = cpuhw->disabled;
-	if (!ret) {
+	if (!cpuhw->disabled) {
 		cpuhw->disabled = 1;
 		cpuhw->n_added = 0;
 
@@ -479,7 +590,7 @@ void hw_perf_enable(void)
 		mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE);
 		mtspr(SPRN_MMCR1, cpuhw->mmcr[1]);
 		if (cpuhw->n_counters == 0)
-			get_lppaca()->pmcregs_in_use = 0;
+			perf_set_pmu_inuse(0);
 		goto out_enable;
 	}
 
@@ -512,7 +623,7 @@ void hw_perf_enable(void)
 	 * bit set and set the hardware counters to their initial values.
 	 * Then unfreeze the counters.
 	 */
-	get_lppaca()->pmcregs_in_use = 1;
+	perf_set_pmu_inuse(1);
 	mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE);
 	mtspr(SPRN_MMCR1, cpuhw->mmcr[1]);
 	mtspr(SPRN_MMCR0, (cpuhw->mmcr[0] & ~(MMCR0_PMC1CE | MMCR0_PMCjCE))
@@ -913,6 +1024,8 @@ const struct pmu *hw_perf_counter_init(struct perf_counter *counter)
 	case PERF_TYPE_RAW:
 		ev = counter->attr.config;
 		break;
+	default:
+		return ERR_PTR(-EINVAL);
 	}
 	counter->hw.config_base = ev;
 	counter->hw.idx = 0;
@@ -1007,13 +1120,12 @@ const struct pmu *hw_perf_counter_init(struct perf_counter *counter)
  * things if requested.  Note that interrupts are hard-disabled
  * here so there is no possibility of being interrupted.
  */
-static void record_and_restart(struct perf_counter *counter, long val,
+static void record_and_restart(struct perf_counter *counter, unsigned long val,
 			       struct pt_regs *regs, int nmi)
 {
 	u64 period = counter->hw.sample_period;
 	s64 prev, delta, left;
 	int record = 0;
-	u64 addr, mmcra, sdsync;
 
 	/* we don't have to worry about interrupts here */
 	prev = atomic64_read(&counter->hw.prev_count);
@@ -1033,8 +1145,8 @@ static void record_and_restart(struct perf_counter *counter, long val,
 				left = period;
 			record = 1;
 		}
-		if (left < 0x80000000L)
-			val = 0x80000000L - left;
+		if (left < 0x80000000LL)
+			val = 0x80000000LL - left;
 	}
 
 	/*
@@ -1047,22 +1159,9 @@ static void record_and_restart(struct perf_counter *counter, long val,
 			.period	= counter->hw.last_period,
 		};
 
-		if (counter->attr.sample_type & PERF_SAMPLE_ADDR) {
-			/*
-			 * The user wants a data address recorded.
-			 * If we're not doing instruction sampling,
-			 * give them the SDAR (sampled data address).
-			 * If we are doing instruction sampling, then only
-			 * give them the SDAR if it corresponds to the
-			 * instruction pointed to by SIAR; this is indicated
-			 * by the [POWER6_]MMCRA_SDSYNC bit in MMCRA.
-			 */
-			mmcra = regs->dsisr;
-			sdsync = (ppmu->flags & PPMU_ALT_SIPR) ?
-				POWER6_MMCRA_SDSYNC : MMCRA_SDSYNC;
-			if (!(mmcra & MMCRA_SAMPLE_ENABLE) || (mmcra & sdsync))
-				data.addr = mfspr(SPRN_SDAR);
-		}
+		if (counter->attr.sample_type & PERF_SAMPLE_ADDR)
+			perf_get_data_addr(regs, &data.addr);
+
 		if (perf_counter_overflow(counter, nmi, &data)) {
 			/*
 			 * Interrupts are coming too fast - throttle them
@@ -1088,25 +1187,12 @@ static void record_and_restart(struct perf_counter *counter, long val,
  */
 unsigned long perf_misc_flags(struct pt_regs *regs)
 {
-	unsigned long mmcra;
-
-	if (TRAP(regs) != 0xf00) {
-		/* not a PMU interrupt */
-		return user_mode(regs) ? PERF_EVENT_MISC_USER :
-			PERF_EVENT_MISC_KERNEL;
-	}
+	u32 flags = perf_get_misc_flags(regs);
 
-	mmcra = regs->dsisr;
-	if (ppmu->flags & PPMU_ALT_SIPR) {
-		if (mmcra & POWER6_MMCRA_SIHV)
-			return PERF_EVENT_MISC_HYPERVISOR;
-		return (mmcra & POWER6_MMCRA_SIPR) ? PERF_EVENT_MISC_USER :
-			PERF_EVENT_MISC_KERNEL;
-	}
-	if (mmcra & MMCRA_SIHV)
-		return PERF_EVENT_MISC_HYPERVISOR;
-	return (mmcra & MMCRA_SIPR) ? PERF_EVENT_MISC_USER :
-			PERF_EVENT_MISC_KERNEL;
+	if (flags)
+		return flags;
+	return user_mode(regs) ? PERF_EVENT_MISC_USER :
+		PERF_EVENT_MISC_KERNEL;
 }
 
 /*
@@ -1115,20 +1201,12 @@ unsigned long perf_misc_flags(struct pt_regs *regs)
  */
 unsigned long perf_instruction_pointer(struct pt_regs *regs)
 {
-	unsigned long mmcra;
 	unsigned long ip;
-	unsigned long slot;
 
 	if (TRAP(regs) != 0xf00)
 		return regs->nip;	/* not a PMU interrupt */
 
-	ip = mfspr(SPRN_SIAR);
-	mmcra = regs->dsisr;
-	if ((mmcra & MMCRA_SAMPLE_ENABLE) && !(ppmu->flags & PPMU_ALT_SIPR)) {
-		slot = (mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT;
-		if (slot > 1)
-			ip += 4 * (slot - 1);
-	}
+	ip = mfspr(SPRN_SIAR) + perf_ip_adjust(regs);
 	return ip;
 }
 
@@ -1140,7 +1218,7 @@ static void perf_counter_interrupt(struct pt_regs *regs)
 	int i;
 	struct cpu_hw_counters *cpuhw = &__get_cpu_var(cpu_hw_counters);
 	struct perf_counter *counter;
-	long val;
+	unsigned long val;
 	int found = 0;
 	int nmi;
 
@@ -1148,16 +1226,9 @@ static void perf_counter_interrupt(struct pt_regs *regs)
 		freeze_limited_counters(cpuhw, mfspr(SPRN_PMC5),
 					mfspr(SPRN_PMC6));
 
-	/*
-	 * Overload regs->dsisr to store MMCRA so we only need to read it once.
-	 */
-	regs->dsisr = mfspr(SPRN_MMCRA);
+	perf_read_regs(regs);
 
-	/*
-	 * If interrupts were soft-disabled when this PMU interrupt
-	 * occurred, treat it as an NMI.
-	 */
-	nmi = !regs->softe;
+	nmi = perf_intr_is_nmi(regs);
 	if (nmi)
 		nmi_enter();
 	else
@@ -1214,50 +1285,22 @@ void hw_perf_counter_setup(int cpu)
 	cpuhw->mmcr[0] = MMCR0_FC;
 }
 
-extern struct power_pmu power4_pmu;
-extern struct power_pmu ppc970_pmu;
-extern struct power_pmu power5_pmu;
-extern struct power_pmu power5p_pmu;
-extern struct power_pmu power6_pmu;
-extern struct power_pmu power7_pmu;
-
-static int init_perf_counters(void)
+int register_power_pmu(struct power_pmu *pmu)
 {
-	unsigned long pvr;
-
-	/* XXX should get this from cputable */
-	pvr = mfspr(SPRN_PVR);
-	switch (PVR_VER(pvr)) {
-	case PV_POWER4:
-	case PV_POWER4p:
-		ppmu = &power4_pmu;
-		break;
-	case PV_970:
-	case PV_970FX:
-	case PV_970MP:
-		ppmu = &ppc970_pmu;
-		break;
-	case PV_POWER5:
-		ppmu = &power5_pmu;
-		break;
-	case PV_POWER5p:
-		ppmu = &power5p_pmu;
-		break;
-	case 0x3e:
-		ppmu = &power6_pmu;
-		break;
-	case 0x3f:
-		ppmu = &power7_pmu;
-		break;
-	}
+	if (ppmu)
+		return -EBUSY;		/* something's already registered */
+
+	ppmu = pmu;
+	pr_info("%s performance monitor hardware support registered\n",
+		pmu->name);
 
+#ifdef MSR_HV
 	/*
 	 * Use FCHV to ignore kernel events if MSR.HV is set.
 	 */
 	if (mfmsr() & MSR_HV)
 		freeze_counters_kernel = MMCR0_FCHV;
+#endif /* CONFIG_PPC64 */
 
 	return 0;
 }
-
-arch_initcall(init_perf_counters);
diff --git a/arch/powerpc/kernel/power4-pmu.c b/arch/powerpc/kernel/power4-pmu.c
index 07bd308a5fa..db90b0c5c27 100644
--- a/arch/powerpc/kernel/power4-pmu.c
+++ b/arch/powerpc/kernel/power4-pmu.c
@@ -10,7 +10,9 @@
  */
 #include <linux/kernel.h>
 #include <linux/perf_counter.h>
+#include <linux/string.h>
 #include <asm/reg.h>
+#include <asm/cputable.h>
 
 /*
  * Bits in event code for POWER4
@@ -179,22 +181,22 @@ static short mmcr1_adder_bits[8] = {
  */
 
 static struct unitinfo {
-	u64	value, mask;
-	int	unit;
-	int	lowerbit;
+	unsigned long	value, mask;
+	int		unit;
+	int		lowerbit;
 } p4_unitinfo[16] = {
-	[PM_FPU]  = { 0x44000000000000ull, 0x88000000000000ull, PM_FPU, 0 },
-	[PM_ISU1] = { 0x20080000000000ull, 0x88000000000000ull, PM_ISU1, 0 },
+	[PM_FPU]  = { 0x44000000000000ul, 0x88000000000000ul, PM_FPU, 0 },
+	[PM_ISU1] = { 0x20080000000000ul, 0x88000000000000ul, PM_ISU1, 0 },
 	[PM_ISU1_ALT] =
-		    { 0x20080000000000ull, 0x88000000000000ull, PM_ISU1, 0 },
-	[PM_IFU]  = { 0x02200000000000ull, 0x08820000000000ull, PM_IFU, 41 },
+		    { 0x20080000000000ul, 0x88000000000000ul, PM_ISU1, 0 },
+	[PM_IFU]  = { 0x02200000000000ul, 0x08820000000000ul, PM_IFU, 41 },
 	[PM_IFU_ALT] =
-		    { 0x02200000000000ull, 0x08820000000000ull, PM_IFU, 41 },
-	[PM_IDU0] = { 0x10100000000000ull, 0x80840000000000ull, PM_IDU0, 1 },
-	[PM_ISU2] = { 0x10140000000000ull, 0x80840000000000ull, PM_ISU2, 0 },
-	[PM_LSU0] = { 0x01400000000000ull, 0x08800000000000ull, PM_LSU0, 0 },
-	[PM_LSU1] = { 0x00000000000000ull, 0x00010000000000ull, PM_LSU1, 40 },
-	[PM_GPS]  = { 0x00000000000000ull, 0x00000000000000ull, PM_GPS, 0 }
+		    { 0x02200000000000ul, 0x08820000000000ul, PM_IFU, 41 },
+	[PM_IDU0] = { 0x10100000000000ul, 0x80840000000000ul, PM_IDU0, 1 },
+	[PM_ISU2] = { 0x10140000000000ul, 0x80840000000000ul, PM_ISU2, 0 },
+	[PM_LSU0] = { 0x01400000000000ul, 0x08800000000000ul, PM_LSU0, 0 },
+	[PM_LSU1] = { 0x00000000000000ul, 0x00010000000000ul, PM_LSU1, 40 },
+	[PM_GPS]  = { 0x00000000000000ul, 0x00000000000000ul, PM_GPS, 0 }
 };
 
 static unsigned char direct_marked_event[8] = {
@@ -249,10 +251,11 @@ static int p4_marked_instr_event(u64 event)
 	return (mask >> (byte * 8 + bit)) & 1;
 }
 
-static int p4_get_constraint(u64 event, u64 *maskp, u64 *valp)
+static int p4_get_constraint(u64 event, unsigned long *maskp,
+			     unsigned long *valp)
 {
 	int pmc, byte, unit, lower, sh;
-	u64 mask = 0, value = 0;
+	unsigned long mask = 0, value = 0;
 	int grp = -1;
 
 	pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
@@ -282,14 +285,14 @@ static int p4_get_constraint(u64 event, u64 *maskp, u64 *valp)
 		value |= p4_unitinfo[unit].value;
 		sh = p4_unitinfo[unit].lowerbit;
 		if (sh > 1)
-			value |= (u64)lower << sh;
+			value |= (unsigned long)lower << sh;
 		else if (lower != sh)
 			return -1;
 		unit = p4_unitinfo[unit].unit;
 
 		/* Set byte lane select field */
 		mask  |= 0xfULL << (28 - 4 * byte);
-		value |= (u64)unit << (28 - 4 * byte);
+		value |= (unsigned long)unit << (28 - 4 * byte);
 	}
 	if (grp == 0) {
 		/* increment PMC1/2/5/6 field */
@@ -353,9 +356,9 @@ static int p4_get_alternatives(u64 event, unsigned int flags, u64 alt[])
 }
 
 static int p4_compute_mmcr(u64 event[], int n_ev,
-			   unsigned int hwc[], u64 mmcr[])
+			   unsigned int hwc[], unsigned long mmcr[])
 {
-	u64 mmcr0 = 0, mmcr1 = 0, mmcra = 0;
+	unsigned long mmcr0 = 0, mmcr1 = 0, mmcra = 0;
 	unsigned int pmc, unit, byte, psel, lower;
 	unsigned int ttm, grp;
 	unsigned int pmc_inuse = 0;
@@ -429,9 +432,11 @@ static int p4_compute_mmcr(u64 event[], int n_ev,
 		return -1;
 
 	/* Set TTMxSEL fields.  Note, units 1-3 => TTM0SEL codes 0-2 */
-	mmcr1 |= (u64)(unituse[3] * 2 + unituse[2]) << MMCR1_TTM0SEL_SH;
-	mmcr1 |= (u64)(unituse[7] * 3 + unituse[6] * 2) << MMCR1_TTM1SEL_SH;
-	mmcr1 |= (u64)unituse[9] << MMCR1_TTM2SEL_SH;
+	mmcr1 |= (unsigned long)(unituse[3] * 2 + unituse[2])
+		<< MMCR1_TTM0SEL_SH;
+	mmcr1 |= (unsigned long)(unituse[7] * 3 + unituse[6] * 2)
+		<< MMCR1_TTM1SEL_SH;
+	mmcr1 |= (unsigned long)unituse[9] << MMCR1_TTM2SEL_SH;
 
 	/* Set TTCxSEL fields. */
 	if (unitlower & 0xe)
@@ -456,7 +461,8 @@ static int p4_compute_mmcr(u64 event[], int n_ev,
 				ttm = unit - 1;		/* 2->1, 3->2 */
 			else
 				ttm = unit >> 2;
-			mmcr1 |= (u64)ttm << (MMCR1_TD_CP_DBG0SEL_SH - 2*byte);
+			mmcr1 |= (unsigned long)ttm
+				<< (MMCR1_TD_CP_DBG0SEL_SH - 2 * byte);
 		}
 	}
 
@@ -519,7 +525,7 @@ static int p4_compute_mmcr(u64 event[], int n_ev,
 	return 0;
 }
 
-static void p4_disable_pmc(unsigned int pmc, u64 mmcr[])
+static void p4_disable_pmc(unsigned int pmc, unsigned long mmcr[])
 {
 	/*
 	 * Setting the PMCxSEL field to 0 disables PMC x.
@@ -583,16 +589,27 @@ static int power4_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
 	},
 };
 
-struct power_pmu power4_pmu = {
-	.n_counter = 8,
-	.max_alternatives = 5,
-	.add_fields = 0x0000001100005555ull,
-	.test_adder = 0x0011083300000000ull,
-	.compute_mmcr = p4_compute_mmcr,
-	.get_constraint = p4_get_constraint,
-	.get_alternatives = p4_get_alternatives,
-	.disable_pmc = p4_disable_pmc,
-	.n_generic = ARRAY_SIZE(p4_generic_events),
-	.generic_events = p4_generic_events,
-	.cache_events = &power4_cache_events,
+static struct power_pmu power4_pmu = {
+	.name			= "POWER4/4+",
+	.n_counter		= 8,
+	.max_alternatives	= 5,
+	.add_fields		= 0x0000001100005555ul,
+	.test_adder		= 0x0011083300000000ul,
+	.compute_mmcr		= p4_compute_mmcr,
+	.get_constraint		= p4_get_constraint,
+	.get_alternatives	= p4_get_alternatives,
+	.disable_pmc		= p4_disable_pmc,
+	.n_generic		= ARRAY_SIZE(p4_generic_events),
+	.generic_events		= p4_generic_events,
+	.cache_events		= &power4_cache_events,
 };
+
+static int init_power4_pmu(void)
+{
+	if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power4"))
+		return -ENODEV;
+
+	return register_power_pmu(&power4_pmu);
+}
+
+arch_initcall(init_power4_pmu);
diff --git a/arch/powerpc/kernel/power5+-pmu.c b/arch/powerpc/kernel/power5+-pmu.c
index 41e5d2d958d..f4adca8e98a 100644
--- a/arch/powerpc/kernel/power5+-pmu.c
+++ b/arch/powerpc/kernel/power5+-pmu.c
@@ -10,7 +10,9 @@
  */
 #include <linux/kernel.h>
 #include <linux/perf_counter.h>
+#include <linux/string.h>
 #include <asm/reg.h>
+#include <asm/cputable.h>
 
 /*
  * Bits in event code for POWER5+ (POWER5 GS) and POWER5++ (POWER5 GS DD3)
@@ -126,20 +128,21 @@ static const int grsel_shift[8] = {
 };
 
 /* Masks and values for using events from the various units */
-static u64 unit_cons[PM_LASTUNIT+1][2] = {
-	[PM_FPU] =   { 0x3200000000ull, 0x0100000000ull },
-	[PM_ISU0] =  { 0x0200000000ull, 0x0080000000ull },
-	[PM_ISU1] =  { 0x3200000000ull, 0x3100000000ull },
-	[PM_IFU] =   { 0x3200000000ull, 0x2100000000ull },
-	[PM_IDU] =   { 0x0e00000000ull, 0x0040000000ull },
-	[PM_GRS] =   { 0x0e00000000ull, 0x0c40000000ull },
+static unsigned long unit_cons[PM_LASTUNIT+1][2] = {
+	[PM_FPU] =   { 0x3200000000ul, 0x0100000000ul },
+	[PM_ISU0] =  { 0x0200000000ul, 0x0080000000ul },
+	[PM_ISU1] =  { 0x3200000000ul, 0x3100000000ul },
+	[PM_IFU] =   { 0x3200000000ul, 0x2100000000ul },
+	[PM_IDU] =   { 0x0e00000000ul, 0x0040000000ul },
+	[PM_GRS] =   { 0x0e00000000ul, 0x0c40000000ul },
 };
 
-static int power5p_get_constraint(u64 event, u64 *maskp, u64 *valp)
+static int power5p_get_constraint(u64 event, unsigned long *maskp,
+				  unsigned long *valp)
 {
 	int pmc, byte, unit, sh;
 	int bit, fmask;
-	u64 mask = 0, value = 0;
+	unsigned long mask = 0, value = 0;
 
 	pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
 	if (pmc) {
@@ -171,17 +174,18 @@ static int power5p_get_constraint(u64 event, u64 *maskp, u64 *valp)
 			bit = event & 7;
 			fmask = (bit == 6)? 7: 3;
 			sh = grsel_shift[bit];
-			mask |= (u64)fmask << sh;
-			value |= (u64)((event >> PM_GRS_SH) & fmask) << sh;
+			mask |= (unsigned long)fmask << sh;
+			value |= (unsigned long)((event >> PM_GRS_SH) & fmask)
+				<< sh;
 		}
 		/* Set byte lane select field */
-		mask  |= 0xfULL << (24 - 4 * byte);
-		value |= (u64)unit << (24 - 4 * byte);
+		mask  |= 0xfUL << (24 - 4 * byte);
+		value |= (unsigned long)unit << (24 - 4 * byte);
 	}
 	if (pmc < 5) {
 		/* need a counter from PMC1-4 set */
-		mask  |= 0x8000000000000ull;
-		value |= 0x1000000000000ull;
+		mask  |= 0x8000000000000ul;
+		value |= 0x1000000000000ul;
 	}
 	*maskp = mask;
 	*valp = value;
@@ -452,10 +456,10 @@ static int power5p_marked_instr_event(u64 event)
 }
 
 static int power5p_compute_mmcr(u64 event[], int n_ev,
-				unsigned int hwc[], u64 mmcr[])
+				unsigned int hwc[], unsigned long mmcr[])
 {
-	u64 mmcr1 = 0;
-	u64 mmcra = 0;
+	unsigned long mmcr1 = 0;
+	unsigned long mmcra = 0;
 	unsigned int pmc, unit, byte, psel;
 	unsigned int ttm;
 	int i, isbus, bit, grsel;
@@ -517,7 +521,7 @@ static int power5p_compute_mmcr(u64 event[], int n_ev,
 			continue;
 		if (ttmuse++)
 			return -1;
-		mmcr1 |= (u64)i << MMCR1_TTM0SEL_SH;
+		mmcr1 |= (unsigned long)i << MMCR1_TTM0SEL_SH;
 	}
 	ttmuse = 0;
 	for (; i <= PM_GRS; ++i) {
@@ -525,7 +529,7 @@ static int power5p_compute_mmcr(u64 event[], int n_ev,
 			continue;
 		if (ttmuse++)
 			return -1;
-		mmcr1 |= (u64)(i & 3) << MMCR1_TTM1SEL_SH;
+		mmcr1 |= (unsigned long)(i & 3) << MMCR1_TTM1SEL_SH;
 	}
 	if (ttmuse > 1)
 		return -1;
@@ -540,10 +544,11 @@ static int power5p_compute_mmcr(u64 event[], int n_ev,
 			unit = PM_ISU0_ALT;
 		} else if (unit == PM_LSU1 + 1) {
 			/* select lower word of LSU1 for this byte */
-			mmcr1 |= 1ull << (MMCR1_TTM3SEL_SH + 3 - byte);
+			mmcr1 |= 1ul << (MMCR1_TTM3SEL_SH + 3 - byte);
 		}
 		ttm = unit >> 2;
-		mmcr1 |= (u64)ttm << (MMCR1_TD_CP_DBG0SEL_SH - 2 * byte);
+		mmcr1 |= (unsigned long)ttm
+			<< (MMCR1_TD_CP_DBG0SEL_SH - 2 * byte);
 	}
 
 	/* Second pass: assign PMCs, set PMCxSEL and PMCx_ADDER_SEL fields */
@@ -568,7 +573,7 @@ static int power5p_compute_mmcr(u64 event[], int n_ev,
 			if (isbus && (byte & 2) &&
 			    (psel == 8 || psel == 0x10 || psel == 0x28))
 				/* add events on higher-numbered bus */
-				mmcr1 |= 1ull << (MMCR1_PMC1_ADDER_SEL_SH - pmc);
+				mmcr1 |= 1ul << (MMCR1_PMC1_ADDER_SEL_SH - pmc);
 		} else {
 			/* Instructions or run cycles on PMC5/6 */
 			--pmc;
@@ -576,7 +581,7 @@ static int power5p_compute_mmcr(u64 event[], int n_ev,
 		if (isbus && unit == PM_GRS) {
 			bit = psel & 7;
 			grsel = (event[i] >> PM_GRS_SH) & PM_GRS_MSK;
-			mmcr1 |= (u64)grsel << grsel_shift[bit];
+			mmcr1 |= (unsigned long)grsel << grsel_shift[bit];
 		}
 		if (power5p_marked_instr_event(event[i]))
 			mmcra |= MMCRA_SAMPLE_ENABLE;
@@ -599,7 +604,7 @@ static int power5p_compute_mmcr(u64 event[], int n_ev,
 	return 0;
 }
 
-static void power5p_disable_pmc(unsigned int pmc, u64 mmcr[])
+static void power5p_disable_pmc(unsigned int pmc, unsigned long mmcr[])
 {
 	if (pmc <= 3)
 		mmcr[1] &= ~(0x7fUL << MMCR1_PMCSEL_SH(pmc));
@@ -654,18 +659,30 @@ static int power5p_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
 	},
 };
 
-struct power_pmu power5p_pmu = {
-	.n_counter = 6,
-	.max_alternatives = MAX_ALT,
-	.add_fields = 0x7000000000055ull,
-	.test_adder = 0x3000040000000ull,
-	.compute_mmcr = power5p_compute_mmcr,
-	.get_constraint = power5p_get_constraint,
-	.get_alternatives = power5p_get_alternatives,
-	.disable_pmc = power5p_disable_pmc,
-	.limited_pmc_event = power5p_limited_pmc_event,
-	.flags = PPMU_LIMITED_PMC5_6,
-	.n_generic = ARRAY_SIZE(power5p_generic_events),
-	.generic_events = power5p_generic_events,
-	.cache_events = &power5p_cache_events,
+static struct power_pmu power5p_pmu = {
+	.name			= "POWER5+/++",
+	.n_counter		= 6,
+	.max_alternatives	= MAX_ALT,
+	.add_fields		= 0x7000000000055ul,
+	.test_adder		= 0x3000040000000ul,
+	.compute_mmcr		= power5p_compute_mmcr,
+	.get_constraint		= power5p_get_constraint,
+	.get_alternatives	= power5p_get_alternatives,
+	.disable_pmc		= power5p_disable_pmc,
+	.limited_pmc_event	= power5p_limited_pmc_event,
+	.flags			= PPMU_LIMITED_PMC5_6,
+	.n_generic		= ARRAY_SIZE(power5p_generic_events),
+	.generic_events		= power5p_generic_events,
+	.cache_events		= &power5p_cache_events,
 };
+
+static int init_power5p_pmu(void)
+{
+	if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5+")
+	    && strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5++"))
+		return -ENODEV;
+
+	return register_power_pmu(&power5p_pmu);
+}
+
+arch_initcall(init_power5p_pmu);
diff --git a/arch/powerpc/kernel/power5-pmu.c b/arch/powerpc/kernel/power5-pmu.c
index 05600b66221..29b2c6c0e83 100644
--- a/arch/powerpc/kernel/power5-pmu.c
+++ b/arch/powerpc/kernel/power5-pmu.c
@@ -10,7 +10,9 @@
  */
 #include <linux/kernel.h>
 #include <linux/perf_counter.h>
+#include <linux/string.h>
 #include <asm/reg.h>
+#include <asm/cputable.h>
 
 /*
  * Bits in event code for POWER5 (not POWER5++)
@@ -130,20 +132,21 @@ static const int grsel_shift[8] = {
 };
 
 /* Masks and values for using events from the various units */
-static u64 unit_cons[PM_LASTUNIT+1][2] = {
-	[PM_FPU] =   { 0xc0002000000000ull, 0x00001000000000ull },
-	[PM_ISU0] =  { 0x00002000000000ull, 0x00000800000000ull },
-	[PM_ISU1] =  { 0xc0002000000000ull, 0xc0001000000000ull },
-	[PM_IFU] =   { 0xc0002000000000ull, 0x80001000000000ull },
-	[PM_IDU] =   { 0x30002000000000ull, 0x00000400000000ull },
-	[PM_GRS] =   { 0x30002000000000ull, 0x30000400000000ull },
+static unsigned long unit_cons[PM_LASTUNIT+1][2] = {
+	[PM_FPU] =   { 0xc0002000000000ul, 0x00001000000000ul },
+	[PM_ISU0] =  { 0x00002000000000ul, 0x00000800000000ul },
+	[PM_ISU1] =  { 0xc0002000000000ul, 0xc0001000000000ul },
+	[PM_IFU] =   { 0xc0002000000000ul, 0x80001000000000ul },
+	[PM_IDU] =   { 0x30002000000000ul, 0x00000400000000ul },
+	[PM_GRS] =   { 0x30002000000000ul, 0x30000400000000ul },
 };
 
-static int power5_get_constraint(u64 event, u64 *maskp, u64 *valp)
+static int power5_get_constraint(u64 event, unsigned long *maskp,
+				 unsigned long *valp)
 {
 	int pmc, byte, unit, sh;
 	int bit, fmask;
-	u64 mask = 0, value = 0;
+	unsigned long mask = 0, value = 0;
 	int grp = -1;
 
 	pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
@@ -178,8 +181,9 @@ static int power5_get_constraint(u64 event, u64 *maskp, u64 *valp)
 			bit = event & 7;
 			fmask = (bit == 6)? 7: 3;
 			sh = grsel_shift[bit];
-			mask |= (u64)fmask << sh;
-			value |= (u64)((event >> PM_GRS_SH) & fmask) << sh;
+			mask |= (unsigned long)fmask << sh;
+			value |= (unsigned long)((event >> PM_GRS_SH) & fmask)
+				<< sh;
 		}
 		/*
 		 * Bus events on bytes 0 and 2 can be counted
@@ -188,22 +192,22 @@ static int power5_get_constraint(u64 event, u64 *maskp, u64 *valp)
 		if (!pmc)
 			grp = byte & 1;
 		/* Set byte lane select field */
-		mask  |= 0xfULL << (24 - 4 * byte);
-		value |= (u64)unit << (24 - 4 * byte);
+		mask  |= 0xfUL << (24 - 4 * byte);
+		value |= (unsigned long)unit << (24 - 4 * byte);
 	}
 	if (grp == 0) {
 		/* increment PMC1/2 field */
-		mask  |= 0x200000000ull;
-		value |= 0x080000000ull;
+		mask  |= 0x200000000ul;
+		value |= 0x080000000ul;
 	} else if (grp == 1) {
 		/* increment PMC3/4 field */
-		mask  |= 0x40000000ull;
-		value |= 0x10000000ull;
+		mask  |= 0x40000000ul;
+		value |= 0x10000000ul;
 	}
 	if (pmc < 5) {
 		/* need a counter from PMC1-4 set */
-		mask  |= 0x8000000000000ull;
-		value |= 0x1000000000000ull;
+		mask  |= 0x8000000000000ul;
+		value |= 0x1000000000000ul;
 	}
 	*maskp = mask;
 	*valp = value;
@@ -383,10 +387,10 @@ static int power5_marked_instr_event(u64 event)
 }
 
 static int power5_compute_mmcr(u64 event[], int n_ev,
-			       unsigned int hwc[], u64 mmcr[])
+			       unsigned int hwc[], unsigned long mmcr[])
 {
-	u64 mmcr1 = 0;
-	u64 mmcra = 0;
+	unsigned long mmcr1 = 0;
+	unsigned long mmcra = 0;
 	unsigned int pmc, unit, byte, psel;
 	unsigned int ttm, grp;
 	int i, isbus, bit, grsel;
@@ -457,7 +461,7 @@ static int power5_compute_mmcr(u64 event[], int n_ev,
 			continue;
 		if (ttmuse++)
 			return -1;
-		mmcr1 |= (u64)i << MMCR1_TTM0SEL_SH;
+		mmcr1 |= (unsigned long)i << MMCR1_TTM0SEL_SH;
 	}
 	ttmuse = 0;
 	for (; i <= PM_GRS; ++i) {
@@ -465,7 +469,7 @@ static int power5_compute_mmcr(u64 event[], int n_ev,
 			continue;
 		if (ttmuse++)
 			return -1;
-		mmcr1 |= (u64)(i & 3) << MMCR1_TTM1SEL_SH;
+		mmcr1 |= (unsigned long)(i & 3) << MMCR1_TTM1SEL_SH;
 	}
 	if (ttmuse > 1)
 		return -1;
@@ -480,10 +484,11 @@ static int power5_compute_mmcr(u64 event[], int n_ev,
 			unit = PM_ISU0_ALT;
 		} else if (unit == PM_LSU1 + 1) {
 			/* select lower word of LSU1 for this byte */
-			mmcr1 |= 1ull << (MMCR1_TTM3SEL_SH + 3 - byte);
+			mmcr1 |= 1ul << (MMCR1_TTM3SEL_SH + 3 - byte);
 		}
 		ttm = unit >> 2;
-		mmcr1 |= (u64)ttm << (MMCR1_TD_CP_DBG0SEL_SH - 2 * byte);
+		mmcr1 |= (unsigned long)ttm
+			<< (MMCR1_TD_CP_DBG0SEL_SH - 2 * byte);
 	}
 
 	/* Second pass: assign PMCs, set PMCxSEL and PMCx_ADDER_SEL fields */
@@ -513,7 +518,7 @@ static int power5_compute_mmcr(u64 event[], int n_ev,
 			--pmc;
 			if ((psel == 8 || psel == 0x10) && isbus && (byte & 2))
 				/* add events on higher-numbered bus */
-				mmcr1 |= 1ull << (MMCR1_PMC1_ADDER_SEL_SH - pmc);
+				mmcr1 |= 1ul << (MMCR1_PMC1_ADDER_SEL_SH - pmc);
 		} else {
 			/* Instructions or run cycles on PMC5/6 */
 			--pmc;
@@ -521,7 +526,7 @@ static int power5_compute_mmcr(u64 event[], int n_ev,
 		if (isbus && unit == PM_GRS) {
 			bit = psel & 7;
 			grsel = (event[i] >> PM_GRS_SH) & PM_GRS_MSK;
-			mmcr1 |= (u64)grsel << grsel_shift[bit];
+			mmcr1 |= (unsigned long)grsel << grsel_shift[bit];
 		}
 		if (power5_marked_instr_event(event[i]))
 			mmcra |= MMCRA_SAMPLE_ENABLE;
@@ -541,7 +546,7 @@ static int power5_compute_mmcr(u64 event[], int n_ev,
 	return 0;
 }
 
-static void power5_disable_pmc(unsigned int pmc, u64 mmcr[])
+static void power5_disable_pmc(unsigned int pmc, unsigned long mmcr[])
 {
 	if (pmc <= 3)
 		mmcr[1] &= ~(0x7fUL << MMCR1_PMCSEL_SH(pmc));
@@ -596,16 +601,27 @@ static int power5_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
 	},
 };
 
-struct power_pmu power5_pmu = {
-	.n_counter = 6,
-	.max_alternatives = MAX_ALT,
-	.add_fields = 0x7000090000555ull,
-	.test_adder = 0x3000490000000ull,
-	.compute_mmcr = power5_compute_mmcr,
-	.get_constraint = power5_get_constraint,
-	.get_alternatives = power5_get_alternatives,
-	.disable_pmc = power5_disable_pmc,
-	.n_generic = ARRAY_SIZE(power5_generic_events),
-	.generic_events = power5_generic_events,
-	.cache_events = &power5_cache_events,
+static struct power_pmu power5_pmu = {
+	.name			= "POWER5",
+	.n_counter		= 6,
+	.max_alternatives	= MAX_ALT,
+	.add_fields		= 0x7000090000555ul,
+	.test_adder		= 0x3000490000000ul,
+	.compute_mmcr		= power5_compute_mmcr,
+	.get_constraint		= power5_get_constraint,
+	.get_alternatives	= power5_get_alternatives,
+	.disable_pmc		= power5_disable_pmc,
+	.n_generic		= ARRAY_SIZE(power5_generic_events),
+	.generic_events		= power5_generic_events,
+	.cache_events		= &power5_cache_events,
 };
+
+static int init_power5_pmu(void)
+{
+	if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5"))
+		return -ENODEV;
+
+	return register_power_pmu(&power5_pmu);
+}
+
+arch_initcall(init_power5_pmu);
diff --git a/arch/powerpc/kernel/power6-pmu.c b/arch/powerpc/kernel/power6-pmu.c
index 46f74bebcfd..09ae5bf5bda 100644
--- a/arch/powerpc/kernel/power6-pmu.c
+++ b/arch/powerpc/kernel/power6-pmu.c
@@ -10,7 +10,9 @@
  */
 #include <linux/kernel.h>
 #include <linux/perf_counter.h>
+#include <linux/string.h>
 #include <asm/reg.h>
+#include <asm/cputable.h>
 
 /*
  * Bits in event code for POWER6
@@ -41,9 +43,9 @@
 #define MMCR1_NESTSEL_SH	45
 #define MMCR1_NESTSEL_MSK	0x7
 #define MMCR1_NESTSEL(m)	(((m) >> MMCR1_NESTSEL_SH) & MMCR1_NESTSEL_MSK)
-#define MMCR1_PMC1_LLA		((u64)1 << 44)
-#define MMCR1_PMC1_LLA_VALUE	((u64)1 << 39)
-#define MMCR1_PMC1_ADDR_SEL	((u64)1 << 35)
+#define MMCR1_PMC1_LLA		(1ul << 44)
+#define MMCR1_PMC1_LLA_VALUE	(1ul << 39)
+#define MMCR1_PMC1_ADDR_SEL	(1ul << 35)
 #define MMCR1_PMC1SEL_SH	24
 #define MMCR1_PMCSEL_SH(n)	(MMCR1_PMC1SEL_SH - (n) * 8)
 #define MMCR1_PMCSEL_MSK	0xff
@@ -173,10 +175,10 @@ static int power6_marked_instr_event(u64 event)
  * Assign PMC numbers and compute MMCR1 value for a set of events
  */
 static int p6_compute_mmcr(u64 event[], int n_ev,
-			   unsigned int hwc[], u64 mmcr[])
+			   unsigned int hwc[], unsigned long mmcr[])
 {
-	u64 mmcr1 = 0;
-	u64 mmcra = 0;
+	unsigned long mmcr1 = 0;
+	unsigned long mmcra = 0;
 	int i;
 	unsigned int pmc, ev, b, u, s, psel;
 	unsigned int ttmset = 0;
@@ -215,7 +217,7 @@ static int p6_compute_mmcr(u64 event[], int n_ev,
 			/* check for conflict on this byte of event bus */
 			if ((ttmset & (1 << b)) && MMCR1_TTMSEL(mmcr1, b) != u)
 				return -1;
-			mmcr1 |= (u64)u << MMCR1_TTMSEL_SH(b);
+			mmcr1 |= (unsigned long)u << MMCR1_TTMSEL_SH(b);
 			ttmset |= 1 << b;
 			if (u == 5) {
 				/* Nest events have a further mux */
@@ -224,7 +226,7 @@ static int p6_compute_mmcr(u64 event[], int n_ev,
 				    MMCR1_NESTSEL(mmcr1) != s)
 					return -1;
 				ttmset |= 0x10;
-				mmcr1 |= (u64)s << MMCR1_NESTSEL_SH;
+				mmcr1 |= (unsigned long)s << MMCR1_NESTSEL_SH;
 			}
 			if (0x30 <= psel && psel <= 0x3d) {
 				/* these need the PMCx_ADDR_SEL bits */
@@ -243,7 +245,7 @@ static int p6_compute_mmcr(u64 event[], int n_ev,
 		if (power6_marked_instr_event(event[i]))
 			mmcra |= MMCRA_SAMPLE_ENABLE;
 		if (pmc < 4)
-			mmcr1 |= (u64)psel << MMCR1_PMCSEL_SH(pmc);
+			mmcr1 |= (unsigned long)psel << MMCR1_PMCSEL_SH(pmc);
 	}
 	mmcr[0] = 0;
 	if (pmc_inuse & 1)
@@ -265,10 +267,11 @@ static int p6_compute_mmcr(u64 event[], int n_ev,
  *	20-23, 24-27, 28-31 ditto for bytes 1, 2, 3
  *	32-34	select field: nest (subunit) event selector
  */
-static int p6_get_constraint(u64 event, u64 *maskp, u64 *valp)
+static int p6_get_constraint(u64 event, unsigned long *maskp,
+			     unsigned long *valp)
 {
 	int pmc, byte, sh, subunit;
-	u64 mask = 0, value = 0;
+	unsigned long mask = 0, value = 0;
 
 	pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
 	if (pmc) {
@@ -282,11 +285,11 @@ static int p6_get_constraint(u64 event, u64 *maskp, u64 *valp)
 		byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK;
 		sh = byte * 4 + (16 - PM_UNIT_SH);
 		mask |= PM_UNIT_MSKS << sh;
-		value |= (u64)(event & PM_UNIT_MSKS) << sh;
+		value |= (unsigned long)(event & PM_UNIT_MSKS) << sh;
 		if ((event & PM_UNIT_MSKS) == (5 << PM_UNIT_SH)) {
 			subunit = (event >> PM_SUBUNIT_SH) & PM_SUBUNIT_MSK;
-			mask  |= (u64)PM_SUBUNIT_MSK << 32;
-			value |= (u64)subunit << 32;
+			mask  |= (unsigned long)PM_SUBUNIT_MSK << 32;
+			value |= (unsigned long)subunit << 32;
 		}
 	}
 	if (pmc <= 4) {
@@ -458,7 +461,7 @@ static int p6_get_alternatives(u64 event, unsigned int flags, u64 alt[])
 	return nalt;
 }
 
-static void p6_disable_pmc(unsigned int pmc, u64 mmcr[])
+static void p6_disable_pmc(unsigned int pmc, unsigned long mmcr[])
 {
 	/* Set PMCxSEL to 0 to disable PMCx */
 	if (pmc <= 3)
@@ -515,18 +518,29 @@ static int power6_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
 	},
 };
 
-struct power_pmu power6_pmu = {
-	.n_counter = 6,
-	.max_alternatives = MAX_ALT,
-	.add_fields = 0x1555,
-	.test_adder = 0x3000,
-	.compute_mmcr = p6_compute_mmcr,
-	.get_constraint = p6_get_constraint,
-	.get_alternatives = p6_get_alternatives,
-	.disable_pmc = p6_disable_pmc,
-	.limited_pmc_event = p6_limited_pmc_event,
-	.flags = PPMU_LIMITED_PMC5_6 | PPMU_ALT_SIPR,
-	.n_generic = ARRAY_SIZE(power6_generic_events),
-	.generic_events = power6_generic_events,
-	.cache_events = &power6_cache_events,
+static struct power_pmu power6_pmu = {
+	.name			= "POWER6",
+	.n_counter		= 6,
+	.max_alternatives	= MAX_ALT,
+	.add_fields		= 0x1555,
+	.test_adder		= 0x3000,
+	.compute_mmcr		= p6_compute_mmcr,
+	.get_constraint		= p6_get_constraint,
+	.get_alternatives	= p6_get_alternatives,
+	.disable_pmc		= p6_disable_pmc,
+	.limited_pmc_event	= p6_limited_pmc_event,
+	.flags			= PPMU_LIMITED_PMC5_6 | PPMU_ALT_SIPR,
+	.n_generic		= ARRAY_SIZE(power6_generic_events),
+	.generic_events		= power6_generic_events,
+	.cache_events		= &power6_cache_events,
 };
+
+static int init_power6_pmu(void)
+{
+	if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power6"))
+		return -ENODEV;
+
+	return register_power_pmu(&power6_pmu);
+}
+
+arch_initcall(init_power6_pmu);
diff --git a/arch/powerpc/kernel/power7-pmu.c b/arch/powerpc/kernel/power7-pmu.c
index b72e7a19d05..5d755ef7ac8 100644
--- a/arch/powerpc/kernel/power7-pmu.c
+++ b/arch/powerpc/kernel/power7-pmu.c
@@ -10,7 +10,9 @@
  */
 #include <linux/kernel.h>
 #include <linux/perf_counter.h>
+#include <linux/string.h>
 #include <asm/reg.h>
+#include <asm/cputable.h>
 
 /*
  * Bits in event code for POWER7
@@ -71,10 +73,11 @@
  *     0-9: Count of events needing PMC1..PMC5
  */
 
-static int power7_get_constraint(u64 event, u64 *maskp, u64 *valp)
+static int power7_get_constraint(u64 event, unsigned long *maskp,
+				 unsigned long *valp)
 {
 	int pmc, sh;
-	u64 mask = 0, value = 0;
+	unsigned long mask = 0, value = 0;
 
 	pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
 	if (pmc) {
@@ -224,10 +227,10 @@ static int power7_marked_instr_event(u64 event)
 }
 
 static int power7_compute_mmcr(u64 event[], int n_ev,
-			       unsigned int hwc[], u64 mmcr[])
+			       unsigned int hwc[], unsigned long mmcr[])
 {
-	u64 mmcr1 = 0;
-	u64 mmcra = 0;
+	unsigned long mmcr1 = 0;
+	unsigned long mmcra = 0;
 	unsigned int pmc, unit, combine, l2sel, psel;
 	unsigned int pmc_inuse = 0;
 	int i;
@@ -265,11 +268,14 @@ static int power7_compute_mmcr(u64 event[], int n_ev,
 			--pmc;
 		}
 		if (pmc <= 3) {
-			mmcr1 |= (u64) unit << (MMCR1_TTM0SEL_SH - 4 * pmc);
-			mmcr1 |= (u64) combine << (MMCR1_PMC1_COMBINE_SH - pmc);
+			mmcr1 |= (unsigned long) unit
+				<< (MMCR1_TTM0SEL_SH - 4 * pmc);
+			mmcr1 |= (unsigned long) combine
+				<< (MMCR1_PMC1_COMBINE_SH - pmc);
 			mmcr1 |= psel << MMCR1_PMCSEL_SH(pmc);
 			if (unit == 6)	/* L2 events */
-				mmcr1 |= (u64) l2sel << MMCR1_L2SEL_SH;
+				mmcr1 |= (unsigned long) l2sel
+					<< MMCR1_L2SEL_SH;
 		}
 		if (power7_marked_instr_event(event[i]))
 			mmcra |= MMCRA_SAMPLE_ENABLE;
@@ -287,10 +293,10 @@ static int power7_compute_mmcr(u64 event[], int n_ev,
 	return 0;
 }
 
-static void power7_disable_pmc(unsigned int pmc, u64 mmcr[])
+static void power7_disable_pmc(unsigned int pmc, unsigned long mmcr[])
 {
 	if (pmc <= 3)
-		mmcr[1] &= ~(0xffULL << MMCR1_PMCSEL_SH(pmc));
+		mmcr[1] &= ~(0xffUL << MMCR1_PMCSEL_SH(pmc));
 }
 
 static int power7_generic_events[] = {
@@ -342,16 +348,27 @@ static int power7_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
 	},
 };
 
-struct power_pmu power7_pmu = {
-	.n_counter = 6,
-	.max_alternatives = MAX_ALT + 1,
-	.add_fields = 0x1555ull,
-	.test_adder = 0x3000ull,
-	.compute_mmcr = power7_compute_mmcr,
-	.get_constraint = power7_get_constraint,
-	.get_alternatives = power7_get_alternatives,
-	.disable_pmc = power7_disable_pmc,
-	.n_generic = ARRAY_SIZE(power7_generic_events),
-	.generic_events = power7_generic_events,
-	.cache_events = &power7_cache_events,
+static struct power_pmu power7_pmu = {
+	.name			= "POWER7",
+	.n_counter		= 6,
+	.max_alternatives	= MAX_ALT + 1,
+	.add_fields		= 0x1555ul,
+	.test_adder		= 0x3000ul,
+	.compute_mmcr		= power7_compute_mmcr,
+	.get_constraint		= power7_get_constraint,
+	.get_alternatives	= power7_get_alternatives,
+	.disable_pmc		= power7_disable_pmc,
+	.n_generic		= ARRAY_SIZE(power7_generic_events),
+	.generic_events		= power7_generic_events,
+	.cache_events		= &power7_cache_events,
 };
+
+static int init_power7_pmu(void)
+{
+	if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power7"))
+		return -ENODEV;
+
+	return register_power_pmu(&power7_pmu);
+}
+
+arch_initcall(init_power7_pmu);
diff --git a/arch/powerpc/kernel/ppc970-pmu.c b/arch/powerpc/kernel/ppc970-pmu.c
index ba0a357a89f..6637c87fe70 100644
--- a/arch/powerpc/kernel/ppc970-pmu.c
+++ b/arch/powerpc/kernel/ppc970-pmu.c
@@ -10,7 +10,9 @@
  */
 #include <linux/string.h>
 #include <linux/perf_counter.h>
+#include <linux/string.h>
 #include <asm/reg.h>
+#include <asm/cputable.h>
 
 /*
  * Bits in event code for PPC970
@@ -183,7 +185,7 @@ static int p970_marked_instr_event(u64 event)
 }
 
 /* Masks and values for using events from the various units */
-static u64 unit_cons[PM_LASTUNIT+1][2] = {
+static unsigned long unit_cons[PM_LASTUNIT+1][2] = {
 	[PM_FPU] =   { 0xc80000000000ull, 0x040000000000ull },
 	[PM_VPU] =   { 0xc80000000000ull, 0xc40000000000ull },
 	[PM_ISU] =   { 0x080000000000ull, 0x020000000000ull },
@@ -192,10 +194,11 @@ static u64 unit_cons[PM_LASTUNIT+1][2] = {
 	[PM_STS] =   { 0x380000000000ull, 0x310000000000ull },
 };
 
-static int p970_get_constraint(u64 event, u64 *maskp, u64 *valp)
+static int p970_get_constraint(u64 event, unsigned long *maskp,
+			       unsigned long *valp)
 {
 	int pmc, byte, unit, sh, spcsel;
-	u64 mask = 0, value = 0;
+	unsigned long mask = 0, value = 0;
 	int grp = -1;
 
 	pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
@@ -222,7 +225,7 @@ static int p970_get_constraint(u64 event, u64 *maskp, u64 *valp)
 			grp = byte & 1;
 		/* Set byte lane select field */
 		mask  |= 0xfULL << (28 - 4 * byte);
-		value |= (u64)unit << (28 - 4 * byte);
+		value |= (unsigned long)unit << (28 - 4 * byte);
 	}
 	if (grp == 0) {
 		/* increment PMC1/2/5/6 field */
@@ -236,7 +239,7 @@ static int p970_get_constraint(u64 event, u64 *maskp, u64 *valp)
 	spcsel = (event >> PM_SPCSEL_SH) & PM_SPCSEL_MSK;
 	if (spcsel) {
 		mask  |= 3ull << 48;
-		value |= (u64)spcsel << 48;
+		value |= (unsigned long)spcsel << 48;
 	}
 	*maskp = mask;
 	*valp = value;
@@ -257,9 +260,9 @@ static int p970_get_alternatives(u64 event, unsigned int flags, u64 alt[])
 }
 
 static int p970_compute_mmcr(u64 event[], int n_ev,
-			     unsigned int hwc[], u64 mmcr[])
+			     unsigned int hwc[], unsigned long mmcr[])
 {
-	u64 mmcr0 = 0, mmcr1 = 0, mmcra = 0;
+	unsigned long mmcr0 = 0, mmcr1 = 0, mmcra = 0;
 	unsigned int pmc, unit, byte, psel;
 	unsigned int ttm, grp;
 	unsigned int pmc_inuse = 0;
@@ -320,7 +323,7 @@ static int p970_compute_mmcr(u64 event[], int n_ev,
 			continue;
 		ttm = unitmap[i];
 		++ttmuse[(ttm >> 2) & 1];
-		mmcr1 |= (u64)(ttm & ~4) << MMCR1_TTM1SEL_SH;
+		mmcr1 |= (unsigned long)(ttm & ~4) << MMCR1_TTM1SEL_SH;
 	}
 	/* Check only one unit per TTMx */
 	if (ttmuse[0] > 1 || ttmuse[1] > 1)
@@ -340,7 +343,8 @@ static int p970_compute_mmcr(u64 event[], int n_ev,
 			if (unit == PM_LSU1L && byte >= 2)
 				mmcr1 |= 1ull << (MMCR1_TTM3SEL_SH + 3 - byte);
 		}
-		mmcr1 |= (u64)ttm << (MMCR1_TD_CP_DBG0SEL_SH - 2 * byte);
+		mmcr1 |= (unsigned long)ttm
+			<< (MMCR1_TD_CP_DBG0SEL_SH - 2 * byte);
 	}
 
 	/* Second pass: assign PMCs, set PMCxSEL and PMCx_ADDER_SEL fields */
@@ -386,7 +390,8 @@ static int p970_compute_mmcr(u64 event[], int n_ev,
 	for (pmc = 0; pmc < 2; ++pmc)
 		mmcr0 |= pmcsel[pmc] << (MMCR0_PMC1SEL_SH - 7 * pmc);
 	for (; pmc < 8; ++pmc)
-		mmcr1 |= (u64)pmcsel[pmc] << (MMCR1_PMC3SEL_SH - 5 * (pmc - 2));
+		mmcr1 |= (unsigned long)pmcsel[pmc]
+			<< (MMCR1_PMC3SEL_SH - 5 * (pmc - 2));
 	if (pmc_inuse & 1)
 		mmcr0 |= MMCR0_PMC1CE;
 	if (pmc_inuse & 0xfe)
@@ -401,7 +406,7 @@ static int p970_compute_mmcr(u64 event[], int n_ev,
 	return 0;
 }
 
-static void p970_disable_pmc(unsigned int pmc, u64 mmcr[])
+static void p970_disable_pmc(unsigned int pmc, unsigned long mmcr[])
 {
 	int shift, i;
 
@@ -467,16 +472,28 @@ static int ppc970_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
 	},
 };
 
-struct power_pmu ppc970_pmu = {
-	.n_counter = 8,
-	.max_alternatives = 2,
-	.add_fields = 0x001100005555ull,
-	.test_adder = 0x013300000000ull,
-	.compute_mmcr = p970_compute_mmcr,
-	.get_constraint = p970_get_constraint,
-	.get_alternatives = p970_get_alternatives,
-	.disable_pmc = p970_disable_pmc,
-	.n_generic = ARRAY_SIZE(ppc970_generic_events),
-	.generic_events = ppc970_generic_events,
-	.cache_events = &ppc970_cache_events,
+static struct power_pmu ppc970_pmu = {
+	.name			= "PPC970/FX/MP",
+	.n_counter		= 8,
+	.max_alternatives	= 2,
+	.add_fields		= 0x001100005555ull,
+	.test_adder		= 0x013300000000ull,
+	.compute_mmcr		= p970_compute_mmcr,
+	.get_constraint		= p970_get_constraint,
+	.get_alternatives	= p970_get_alternatives,
+	.disable_pmc		= p970_disable_pmc,
+	.n_generic		= ARRAY_SIZE(ppc970_generic_events),
+	.generic_events		= ppc970_generic_events,
+	.cache_events		= &ppc970_cache_events,
 };
+
+static int init_ppc970_pmu(void)
+{
+	if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/970")
+	    && strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/970MP"))
+		return -ENODEV;
+
+	return register_power_pmu(&ppc970_pmu);
+}
+
+arch_initcall(init_ppc970_pmu);
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index ef6f64950e9..a538824616f 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -1947,8 +1947,47 @@ static void __init fixup_device_tree_maple(void)
 	prom_setprop(isa, name, "ranges",
 			isa_ranges, sizeof(isa_ranges));
 }
+
+#define CPC925_MC_START		0xf8000000
+#define CPC925_MC_LENGTH	0x1000000
+/* The values for memory-controller don't have right number of cells */
+static void __init fixup_device_tree_maple_memory_controller(void)
+{
+	phandle mc;
+	u32 mc_reg[4];
+	char *name = "/hostbridge@f8000000";
+	struct prom_t *_prom = &RELOC(prom);
+	u32 ac, sc;
+
+	mc = call_prom("finddevice", 1, 1, ADDR(name));
+	if (!PHANDLE_VALID(mc))
+		return;
+
+	if (prom_getproplen(mc, "reg") != 8)
+		return;
+
+	prom_getprop(_prom->root, "#address-cells", &ac, sizeof(ac));
+	prom_getprop(_prom->root, "#size-cells", &sc, sizeof(sc));
+	if ((ac != 2) || (sc != 2))
+		return;
+
+	if (prom_getprop(mc, "reg", mc_reg, sizeof(mc_reg)) == PROM_ERROR)
+		return;
+
+	if (mc_reg[0] != CPC925_MC_START || mc_reg[1] != CPC925_MC_LENGTH)
+		return;
+
+	prom_printf("Fixing up bogus hostbridge on Maple...\n");
+
+	mc_reg[0] = 0x0;
+	mc_reg[1] = CPC925_MC_START;
+	mc_reg[2] = 0x0;
+	mc_reg[3] = CPC925_MC_LENGTH;
+	prom_setprop(mc, name, "reg", mc_reg, sizeof(mc_reg));
+}
 #else
 #define fixup_device_tree_maple()
+#define fixup_device_tree_maple_memory_controller()
 #endif
 
 #ifdef CONFIG_PPC_CHRP
@@ -2189,6 +2228,7 @@ static void __init fixup_device_tree_efika(void)
 static void __init fixup_device_tree(void)
 {
 	fixup_device_tree_maple();
+	fixup_device_tree_maple_memory_controller();
 	fixup_device_tree_chrp();
 	fixup_device_tree_pmac();
 	fixup_device_tree_efika();
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 15391c2ab01..eae4511ceea 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -53,6 +53,7 @@
 #include <linux/posix-timers.h>
 #include <linux/irq.h>
 #include <linux/delay.h>
+#include <linux/perf_counter.h>
 
 #include <asm/io.h>
 #include <asm/processor.h>
@@ -525,6 +526,26 @@ void __init iSeries_time_init_early(void)
 }
 #endif /* CONFIG_PPC_ISERIES */
 
+#if defined(CONFIG_PERF_COUNTERS) && defined(CONFIG_PPC32)
+DEFINE_PER_CPU(u8, perf_counter_pending);
+
+void set_perf_counter_pending(void)
+{
+	get_cpu_var(perf_counter_pending) = 1;
+	set_dec(1);
+	put_cpu_var(perf_counter_pending);
+}
+
+#define test_perf_counter_pending()	__get_cpu_var(perf_counter_pending)
+#define clear_perf_counter_pending()	__get_cpu_var(perf_counter_pending) = 0
+
+#else  /* CONFIG_PERF_COUNTERS && CONFIG_PPC32 */
+
+#define test_perf_counter_pending()	0
+#define clear_perf_counter_pending()
+
+#endif /* CONFIG_PERF_COUNTERS && CONFIG_PPC32 */
+
 /*
  * For iSeries shared processors, we have to let the hypervisor
  * set the hardware decrementer.  We set a virtual decrementer
@@ -551,6 +572,10 @@ void timer_interrupt(struct pt_regs * regs)
 	set_dec(DECREMENTER_MAX);
 
 #ifdef CONFIG_PPC32
+	if (test_perf_counter_pending()) {
+		clear_perf_counter_pending();
+		perf_counter_do_pending();
+	}
 	if (atomic_read(&ppc_n_lost_interrupts) != 0)
 		do_IRQ(regs);
 #endif
diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile
index 4b2df66c79d..459c7ee580f 100644
--- a/arch/powerpc/kvm/Makefile
+++ b/arch/powerpc/kvm/Makefile
@@ -2,6 +2,8 @@
 # Makefile for Kernel-based Virtual Machine module
 #
 
+subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
+
 EXTRA_CFLAGS += -Ivirt/kvm -Iarch/powerpc/kvm
 
 common-objs-y = $(addprefix ../../../virt/kvm/, kvm_main.o coalesced_mmio.o)
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 29b742b90f1..3040dac18a3 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -2,6 +2,8 @@
 # Makefile for ppc-specific library files..
 #
 
+subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
+
 ifeq ($(CONFIG_PPC64),y)
 EXTRA_CFLAGS		+= -mno-minimal-toc
 endif
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index c4bcf072cb3..2d2192e48de 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -2,6 +2,8 @@
 # Makefile for the linux ppc-specific parts of the memory manager.
 #
 
+subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
+
 ifeq ($(CONFIG_PPC64),y)
 EXTRA_CFLAGS	+= -mno-minimal-toc
 endif
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 5beffc8f481..830bef0a113 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -302,7 +302,7 @@ good_area:
 	 * the fault.
 	 */
  survive:
-	ret = handle_mm_fault(mm, vma, address, is_write);
+	ret = handle_mm_fault(mm, vma, address, is_write ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(ret & VM_FAULT_ERROR)) {
 		if (ret & VM_FAULT_OOM)
 			goto out_of_memory;
diff --git a/arch/powerpc/oprofile/Makefile b/arch/powerpc/oprofile/Makefile
index 2ef6b0dddd8..73e1c2ca055 100644
--- a/arch/powerpc/oprofile/Makefile
+++ b/arch/powerpc/oprofile/Makefile
@@ -1,3 +1,5 @@
+subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
+
 ifeq ($(CONFIG_PPC64),y)
 EXTRA_CFLAGS	+= -mno-minimal-toc
 endif
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index c5118802a28..42e09a9f77e 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -43,7 +43,13 @@ static int __init warp_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 
-	return of_flat_dt_is_compatible(root, "pika,warp");
+	if (!of_flat_dt_is_compatible(root, "pika,warp"))
+		return 0;
+
+	/* For __dma_alloc_coherent */
+	ISA_DMA_THRESHOLD = ~0L;
+
+	return 1;
 }
 
 define_machine(warp) {
diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c
index 1bcff94eb92..84544d07204 100644
--- a/arch/powerpc/platforms/512x/clock.c
+++ b/arch/powerpc/platforms/512x/clock.c
@@ -24,7 +24,7 @@
 #include <linux/io.h>
 
 #include <linux/of_platform.h>
-#include <asm/mpc512x.h>
+#include <asm/mpc5xxx.h>
 #include <asm/clk_interface.h>
 
 #undef CLK_DEBUG
@@ -83,13 +83,13 @@ static void dump_clocks(void)
 	mutex_lock(&clocks_mutex);
 	printk(KERN_INFO "CLOCKS:\n");
 	list_for_each_entry(p, &clocks, node) {
-		printk(KERN_INFO "  %s %ld", p->name, p->rate);
+		pr_info("  %s=%ld", p->name, p->rate);
 		if (p->parent)
-			printk(KERN_INFO " %s %ld", p->parent->name,
+			pr_cont(" %s=%ld", p->parent->name,
 			       p->parent->rate);
 		if (p->flags & CLK_HAS_CTRL)
-			printk(KERN_INFO " reg/bit %d/%d", p->reg, p->bit);
-		printk("\n");
+			pr_cont(" reg/bit=%d/%d", p->reg, p->bit);
+		pr_cont("\n");
 	}
 	mutex_unlock(&clocks_mutex);
 }
diff --git a/arch/powerpc/platforms/512x/mpc512x.h b/arch/powerpc/platforms/512x/mpc512x.h
index 9c03693cb00..22a5352407e 100644
--- a/arch/powerpc/platforms/512x/mpc512x.h
+++ b/arch/powerpc/platforms/512x/mpc512x.h
@@ -11,7 +11,6 @@
 
 #ifndef __MPC512X_H__
 #define __MPC512X_H__
-extern unsigned long mpc512x_find_ips_freq(struct device_node *node);
 extern void __init mpc512x_init_IRQ(void);
 void __init mpc512x_declare_of_platform_devices(void);
 #endif				/* __MPC512X_H__ */
diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c
index d8cd579f319..434d683df5a 100644
--- a/arch/powerpc/platforms/512x/mpc512x_shared.c
+++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
@@ -24,29 +24,6 @@
 
 #include "mpc512x.h"
 
-unsigned long
-mpc512x_find_ips_freq(struct device_node *node)
-{
-	struct device_node *np;
-	const unsigned int *p_ips_freq = NULL;
-
-	of_node_get(node);
-	while (node) {
-		p_ips_freq = of_get_property(node, "bus-frequency", NULL);
-		if (p_ips_freq)
-			break;
-
-		np = of_get_parent(node);
-		of_node_put(node);
-		node = np;
-	}
-	if (node)
-		of_node_put(node);
-
-	return p_ips_freq ? *p_ips_freq : 0;
-}
-EXPORT_SYMBOL(mpc512x_find_ips_freq);
-
 void __init mpc512x_init_IRQ(void)
 {
 	struct device_node *np;
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c
index 8e3dd5a0f22..a46bad0c233 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_common.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c
@@ -47,36 +47,6 @@ static DEFINE_SPINLOCK(mpc52xx_lock);
 static struct mpc52xx_gpt __iomem *mpc52xx_wdt;
 static struct mpc52xx_cdm __iomem *mpc52xx_cdm;
 
-/**
- * 	mpc52xx_find_ipb_freq - Find the IPB bus frequency for a device
- * 	@node:	device node
- *
- * 	Returns IPB bus frequency, or 0 if the bus frequency cannot be found.
- */
-unsigned int
-mpc52xx_find_ipb_freq(struct device_node *node)
-{
-	struct device_node *np;
-	const unsigned int *p_ipb_freq = NULL;
-
-	of_node_get(node);
-	while (node) {
-		p_ipb_freq = of_get_property(node, "bus-frequency", NULL);
-		if (p_ipb_freq)
-			break;
-
-		np = of_get_parent(node);
-		of_node_put(node);
-		node = np;
-	}
-	if (node)
-		of_node_put(node);
-
-	return p_ipb_freq ? *p_ipb_freq : 0;
-}
-EXPORT_SYMBOL(mpc52xx_find_ipb_freq);
-
-
 /*
  * Configure the XLB arbiter settings to match what Linux expects.
  */
@@ -221,7 +191,7 @@ unsigned int mpc52xx_get_xtal_freq(struct device_node *node)
 	if (!mpc52xx_cdm)
 		return 0;
 
-	freq = mpc52xx_find_ipb_freq(node);
+	freq = mpc5xxx_get_bus_frequency(node);
 	if (!freq)
 		return 0;
 
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 437d29a59d7..083ebee9a16 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -96,6 +96,13 @@ config ASP834x
 	  This enables support for the Analogue & Micro ASP 83xx
 	  board.
 
+config KMETER1
+	bool "Keymile KMETER1"
+	select DEFAULT_UIMAGE
+	select QUICC_ENGINE
+	help
+	  This enables support for the Keymile KMETER1 board.
+
 
 endif
 
diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile
index 051777c542c..e139c36572e 100644
--- a/arch/powerpc/platforms/83xx/Makefile
+++ b/arch/powerpc/platforms/83xx/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_MPC837x_MDS)	+= mpc837x_mds.o
 obj-$(CONFIG_SBC834x)		+= sbc834x.o
 obj-$(CONFIG_MPC837x_RDB)	+= mpc837x_rdb.o
 obj-$(CONFIG_ASP834x)		+= asp834x.o
+obj-$(CONFIG_KMETER1)		+= kmeter1.o
diff --git a/arch/powerpc/platforms/83xx/kmeter1.c b/arch/powerpc/platforms/83xx/kmeter1.c
new file mode 100644
index 00000000000..903acfd851a
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/kmeter1.c
@@ -0,0 +1,191 @@
+/*
+ * Copyright 2008 DENX Software Engineering GmbH
+ * Author: Heiko Schocher <hs@denx.de>
+ *
+ * Description:
+ * Keymile KMETER1 board specific routines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include <asm/qe.h>
+#include <asm/qe_ic.h>
+
+#include "mpc83xx.h"
+
+#define SVR_REV(svr)    (((svr) >>  0) & 0xFFFF) /* Revision field */
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init kmeter1_setup_arch(void)
+{
+	struct device_node *np;
+
+	if (ppc_md.progress)
+		ppc_md.progress("kmeter1_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
+		mpc83xx_add_bridge(np);
+#endif
+
+#ifdef CONFIG_QUICC_ENGINE
+	qe_reset();
+
+	np = of_find_node_by_name(NULL, "par_io");
+	if (np != NULL) {
+		par_io_init(np);
+		of_node_put(np);
+
+		for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
+			par_io_of_config(np);
+	}
+
+	np = of_find_compatible_node(NULL, "network", "ucc_geth");
+	if (np != NULL) {
+		uint svid;
+
+		/* handle mpc8360ea rev.2.1 erratum 2: RGMII Timing */
+		svid = mfspr(SPRN_SVR);
+		if (SVR_REV(svid) == 0x0021) {
+			struct	device_node *np_par;
+			struct	resource res;
+			void	__iomem *base;
+			int	ret;
+
+			np_par = of_find_node_by_name(NULL, "par_io");
+			if (np_par == NULL) {
+				printk(KERN_WARNING "%s couldn;t find par_io node\n",
+					__func__);
+				return;
+			}
+			/* Map Parallel I/O ports registers */
+			ret = of_address_to_resource(np_par, 0, &res);
+			if (ret) {
+				printk(KERN_WARNING "%s couldn;t map par_io registers\n",
+					__func__);
+				return;
+			}
+			base = ioremap(res.start, res.end - res.start + 1);
+
+			/*
+			 * IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2)
+			 * IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1)
+			 */
+			setbits32((base + 0xa8), 0x0c003000);
+
+			/*
+			 * IMMR + 0x14AC[20:27] = 10101010
+			 * (data delay for both UCC's)
+			 */
+			clrsetbits_be32((base + 0xac), 0xff0, 0xaa0);
+			iounmap(base);
+			of_node_put(np_par);
+		}
+		of_node_put(np);
+	}
+#endif				/* CONFIG_QUICC_ENGINE */
+}
+
+static struct of_device_id kmeter_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
+	{ .type = "qe", },
+	{ .compatible = "fsl,qe", },
+	{},
+};
+
+static int __init kmeter_declare_of_platform_devices(void)
+{
+	/* Publish the QE devices */
+	of_platform_bus_probe(NULL, kmeter_ids, NULL);
+
+	return 0;
+}
+machine_device_initcall(kmeter1, kmeter_declare_of_platform_devices);
+
+static void __init kmeter1_init_IRQ(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,pq2pro-pic");
+	if (!np) {
+		np = of_find_node_by_type(NULL, "ipic");
+		if (!np)
+			return;
+	}
+
+	ipic_init(np, 0);
+
+	/* Initialize the default interrupt mapping priorities,
+	 * in case the boot rom changed something on us.
+	 */
+	ipic_set_default_priority();
+	of_node_put(np);
+
+#ifdef CONFIG_QUICC_ENGINE
+	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
+	if (!np) {
+		np = of_find_node_by_type(NULL, "qeic");
+		if (!np)
+			return;
+	}
+	qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
+	of_node_put(np);
+#endif				/* CONFIG_QUICC_ENGINE */
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init kmeter1_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "keymile,KMETER1");
+}
+
+define_machine(kmeter1) {
+	.name		= "KMETER1",
+	.probe		= kmeter1_probe,
+	.setup_arch	= kmeter1_setup_arch,
+	.init_IRQ	= kmeter1_init_IRQ,
+	.get_irq	= ipic_get_irq,
+	.restart	= mpc83xx_restart,
+	.time_init	= mpc83xx_time_init,
+	.calibrate_decr	= generic_calibrate_decr,
+	.progress	= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h
index 83cfe51526e..d1dc5b0b4fb 100644
--- a/arch/powerpc/platforms/83xx/mpc83xx.h
+++ b/arch/powerpc/platforms/83xx/mpc83xx.h
@@ -22,8 +22,8 @@
 /* system i/o configuration register low */
 #define MPC83XX_SICRL_OFFS         0x114
 #define MPC834X_SICRL_USB_MASK     0x60000000
-#define MPC834X_SICRL_USB0         0x40000000
-#define MPC834X_SICRL_USB1         0x20000000
+#define MPC834X_SICRL_USB0         0x20000000
+#define MPC834X_SICRL_USB1         0x40000000
 #define MPC831X_SICRL_USB_MASK     0x00000c00
 #define MPC831X_SICRL_USB_ULPI     0x00000800
 #define MPC8315_SICRL_USB_MASK     0x000000fc
diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c
index 11e1fac17c7..3ba4bb7d41b 100644
--- a/arch/powerpc/platforms/83xx/usb.c
+++ b/arch/powerpc/platforms/83xx/usb.c
@@ -47,25 +47,25 @@ int mpc834x_usb_cfg(void)
 		sccr |= MPC83XX_SCCR_USB_DRCM_11;  /* 1:3 */
 
 		prop = of_get_property(np, "phy_type", NULL);
+		port1_is_dr = 1;
 		if (prop && (!strcmp(prop, "utmi") ||
 					!strcmp(prop, "utmi_wide"))) {
 			sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1;
 			sicrh |= MPC834X_SICRH_USB_UTMI;
-			port1_is_dr = 1;
+			port0_is_dr = 1;
 		} else if (prop && !strcmp(prop, "serial")) {
 			dr_mode = of_get_property(np, "dr_mode", NULL);
 			if (dr_mode && !strcmp(dr_mode, "otg")) {
 				sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1;
-				port1_is_dr = 1;
+				port0_is_dr = 1;
 			} else {
-				sicrl |= MPC834X_SICRL_USB0;
+				sicrl |= MPC834X_SICRL_USB1;
 			}
 		} else if (prop && !strcmp(prop, "ulpi")) {
-			sicrl |= MPC834X_SICRL_USB0;
+			sicrl |= MPC834X_SICRL_USB1;
 		} else {
 			printk(KERN_WARNING "834x USB PHY type not supported\n");
 		}
-		port0_is_dr = 1;
 		of_node_put(np);
 	}
 	np = of_find_compatible_node(NULL, NULL, "fsl-usb2-mph");
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 43d385cedcd..a9b41668897 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -35,12 +35,14 @@ config MPC85xx_MDS
 	select DEFAULT_UIMAGE
 	select PHYLIB
 	select HAS_RAPIDIO
+	select SWIOTLB
 	help
 	  This option enables support for the MPC85xx MDS board
 
 config MPC8536_DS
 	bool "Freescale MPC8536 DS"
 	select DEFAULT_UIMAGE
+	select SWIOTLB
 	help
 	  This option enables support for the MPC8536 DS board
 
@@ -49,6 +51,7 @@ config MPC85xx_DS
 	select PPC_I8259
 	select DEFAULT_UIMAGE
 	select FSL_ULI1575
+	select SWIOTLB
 	help
 	  This option enables support for the MPC85xx DS (MPC8544 DS) board
 
@@ -64,6 +67,16 @@ config KSI8560
         help
           This option enables support for the Emerson KSI8560 board
 
+config XES_MPC85xx
+	bool "X-ES single-board computer"
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for the various single-board
+	  computers from Extreme Engineering Solutions (X-ES) based on
+	  Freescale MPC85xx processors.
+	  Manufacturer: Extreme Engineering Solutions, Inc.
+	  URL: <http://www.xes-inc.com/>
+
 config STX_GP3
 	bool "Silicon Turnkey Express GP3"
 	help
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index a857b35b982..835733f2b12 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_SBC8560)     += sbc8560.o
 obj-$(CONFIG_SBC8548)     += sbc8548.o
 obj-$(CONFIG_SOCRATES)    += socrates.o socrates_fpga_pic.o
 obj-$(CONFIG_KSI8560)	  += ksi8560.o
+obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o
\ No newline at end of file
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
index 63efca20d7b..055ff417bae 100644
--- a/arch/powerpc/platforms/85xx/mpc8536_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -17,6 +17,7 @@
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/of_platform.h>
+#include <linux/lmb.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -26,6 +27,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <asm/mpic.h>
+#include <asm/swiotlb.h>
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
@@ -65,7 +67,9 @@ static void __init mpc8536_ds_setup_arch(void)
 {
 #ifdef CONFIG_PCI
 	struct device_node *np;
+	struct pci_controller *hose;
 #endif
+	dma_addr_t max = 0xffffffff;
 
 	if (ppc_md.progress)
 		ppc_md.progress("mpc8536_ds_setup_arch()", 0);
@@ -80,11 +84,22 @@ static void __init mpc8536_ds_setup_arch(void)
 				fsl_add_bridge(np, 1);
 			else
 				fsl_add_bridge(np, 0);
+
+			hose = pci_find_hose_for_OF_device(np);
+			max = min(max, hose->dma_window_base_cur +
+					hose->dma_window_size);
 		}
 	}
 
 #endif
 
+#ifdef CONFIG_SWIOTLB
+	if (lmb_end_of_DRAM() > max) {
+		ppc_swiotlb_enable = 1;
+		set_pci_dma_ops(&swiotlb_pci_dma_ops);
+	}
+#endif
+
 	printk("MPC8536 DS board from Freescale Semiconductor\n");
 }
 
@@ -102,6 +117,8 @@ static int __init mpc8536_ds_publish_devices(void)
 }
 machine_device_initcall(mpc8536_ds, mpc8536_ds_publish_devices);
 
+machine_arch_initcall(mpc8536_ds, swiotlb_setup_bus_notifier);
+
 /*
  * Called very early, device-tree isn't unflattened
  */
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 53d5851a6c9..849c0ac0025 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -20,6 +20,7 @@
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/of_platform.h>
+#include <linux/lmb.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -30,6 +31,7 @@
 #include <asm/udbg.h>
 #include <asm/mpic.h>
 #include <asm/i8259.h>
+#include <asm/swiotlb.h>
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
@@ -155,7 +157,9 @@ static void __init mpc85xx_ds_setup_arch(void)
 {
 #ifdef CONFIG_PCI
 	struct device_node *np;
+	struct pci_controller *hose;
 #endif
+	dma_addr_t max = 0xffffffff;
 
 	if (ppc_md.progress)
 		ppc_md.progress("mpc85xx_ds_setup_arch()", 0);
@@ -171,6 +175,10 @@ static void __init mpc85xx_ds_setup_arch(void)
 				fsl_add_bridge(np, 1);
 			else
 				fsl_add_bridge(np, 0);
+
+			hose = pci_find_hose_for_OF_device(np);
+			max = min(max, hose->dma_window_base_cur +
+					hose->dma_window_size);
 		}
 	}
 
@@ -181,6 +189,13 @@ static void __init mpc85xx_ds_setup_arch(void)
 	mpc85xx_smp_init();
 #endif
 
+#ifdef CONFIG_SWIOTLB
+	if (lmb_end_of_DRAM() > max) {
+		ppc_swiotlb_enable = 1;
+		set_pci_dma_ops(&swiotlb_pci_dma_ops);
+	}
+#endif
+
 	printk("MPC85xx DS board from Freescale Semiconductor\n");
 }
 
@@ -217,6 +232,10 @@ machine_device_initcall(mpc8544_ds, mpc85xxds_publish_devices);
 machine_device_initcall(mpc8572_ds, mpc85xxds_publish_devices);
 machine_device_initcall(p2020_ds, mpc85xxds_publish_devices);
 
+machine_arch_initcall(mpc8544_ds, swiotlb_setup_bus_notifier);
+machine_arch_initcall(mpc8572_ds, swiotlb_setup_bus_notifier);
+machine_arch_initcall(p2020_ds, swiotlb_setup_bus_notifier);
+
 /*
  * Called very early, device-tree isn't unflattened
  */
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index b2c0a431997..77f90b35635 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -33,6 +33,7 @@
 #include <linux/of_platform.h>
 #include <linux/of_device.h>
 #include <linux/phy.h>
+#include <linux/lmb.h>
 
 #include <asm/system.h>
 #include <asm/atomic.h>
@@ -49,6 +50,7 @@
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
 #include <asm/mpic.h>
+#include <asm/swiotlb.h>
 
 #undef DEBUG
 #ifdef DEBUG
@@ -155,6 +157,10 @@ static void __init mpc85xx_mds_setup_arch(void)
 {
 	struct device_node *np;
 	static u8 __iomem *bcsr_regs = NULL;
+#ifdef CONFIG_PCI
+	struct pci_controller *hose;
+#endif
+	dma_addr_t max = 0xffffffff;
 
 	if (ppc_md.progress)
 		ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
@@ -179,6 +185,10 @@ static void __init mpc85xx_mds_setup_arch(void)
 				fsl_add_bridge(np, 1);
 			else
 				fsl_add_bridge(np, 0);
+
+			hose = pci_find_hose_for_OF_device(np);
+			max = min(max, hose->dma_window_base_cur +
+					hose->dma_window_size);
 		}
 	}
 #endif
@@ -227,6 +237,13 @@ static void __init mpc85xx_mds_setup_arch(void)
 		iounmap(bcsr_regs);
 	}
 #endif	/* CONFIG_QUICC_ENGINE */
+
+#ifdef CONFIG_SWIOTLB
+	if (lmb_end_of_DRAM() > max) {
+		ppc_swiotlb_enable = 1;
+		set_pci_dma_ops(&swiotlb_pci_dma_ops);
+	}
+#endif
 }
 
 
@@ -281,6 +298,9 @@ static int __init mpc85xx_publish_devices(void)
 machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices);
 machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices);
 
+machine_arch_initcall(mpc8568_mds, swiotlb_setup_bus_notifier);
+machine_arch_initcall(mpc8569_mds, swiotlb_setup_bus_notifier);
+
 static void __init mpc85xx_mds_pic_init(void)
 {
 	struct mpic *mpic;
diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
new file mode 100644
index 00000000000..ee01532786e
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
@@ -0,0 +1,282 @@
+/*
+ * Copyright (C) 2009 Extreme Engineering Solutions, Inc.
+ *
+ * X-ES board-specific functionality
+ *
+ * Based on mpc85xx_ds code from Freescale Semiconductor, Inc.
+ *
+ * Author: Nate Case <ncase@xes-inc.com>
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include <linux/of_platform.h>
+
+/* A few bit definitions needed for fixups on some boards */
+#define MPC85xx_L2CTL_L2E		0x80000000 /* L2 enable */
+#define MPC85xx_L2CTL_L2I		0x40000000 /* L2 flash invalidate */
+#define MPC85xx_L2CTL_L2SIZ_MASK	0x30000000 /* L2 SRAM size (R/O) */
+
+void __init xes_mpc85xx_pic_init(void)
+{
+	struct mpic *mpic;
+	struct resource r;
+	struct device_node *np;
+
+	np = of_find_node_by_type(NULL, "open-pic");
+	if (np == NULL) {
+		printk(KERN_ERR "Could not find open-pic node\n");
+		return;
+	}
+
+	if (of_address_to_resource(np, 0, &r)) {
+		printk(KERN_ERR "Failed to map mpic register space\n");
+		of_node_put(np);
+		return;
+	}
+
+	mpic = mpic_alloc(np, r.start,
+			  MPIC_PRIMARY | MPIC_WANTS_RESET |
+			  MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS,
+			0, 256, " OpenPIC  ");
+	BUG_ON(mpic == NULL);
+	of_node_put(np);
+
+	mpic_init(mpic);
+}
+
+static void xes_mpc85xx_configure_l2(void __iomem *l2_base)
+{
+	volatile uint32_t ctl, tmp;
+
+	asm volatile("msync; isync");
+	tmp = in_be32(l2_base);
+
+	/*
+	 * xMon may have enabled part of L2 as SRAM, so we need to set it
+	 * up for all cache mode just to be safe.
+	 */
+	printk(KERN_INFO "xes_mpc85xx: Enabling L2 as cache\n");
+
+	ctl = MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2I;
+	if (machine_is_compatible("MPC8540") ||
+	    machine_is_compatible("MPC8560"))
+		/*
+		 * Assume L2 SRAM is used fully for cache, so set
+		 * L2BLKSZ (bits 4:5) to match L2SIZ (bits 2:3).
+		 */
+		ctl |= (tmp & MPC85xx_L2CTL_L2SIZ_MASK) >> 2;
+
+	asm volatile("msync; isync");
+	out_be32(l2_base, ctl);
+	asm volatile("msync; isync");
+}
+
+static void xes_mpc85xx_fixups(void)
+{
+	struct device_node *np;
+	int err;
+
+	/*
+	 * Legacy xMon firmware on some X-ES boards does not enable L2
+	 * as cache.  We must ensure that they get enabled here.
+	 */
+	for_each_node_by_name(np, "l2-cache-controller") {
+		struct resource r[2];
+		void __iomem *l2_base;
+
+		/* Only MPC8548, MPC8540, and MPC8560 boards are affected */
+		if (!of_device_is_compatible(np,
+				    "fsl,mpc8548-l2-cache-controller") &&
+		    !of_device_is_compatible(np,
+				    "fsl,mpc8540-l2-cache-controller") &&
+		    !of_device_is_compatible(np,
+				    "fsl,mpc8560-l2-cache-controller"))
+			continue;
+
+		err = of_address_to_resource(np, 0, &r[0]);
+		if (err) {
+			printk(KERN_WARNING "xes_mpc85xx: Could not get "
+			       "resource for device tree node '%s'",
+			       np->full_name);
+			continue;
+		}
+
+		l2_base = ioremap(r[0].start, r[0].end - r[0].start + 1);
+
+		xes_mpc85xx_configure_l2(l2_base);
+	}
+}
+
+#ifdef CONFIG_PCI
+static int primary_phb_addr;
+#endif
+
+/*
+ * Setup the architecture
+ */
+#ifdef CONFIG_SMP
+extern void __init mpc85xx_smp_init(void);
+#endif
+static void __init xes_mpc85xx_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+	struct device_node *np;
+#endif
+	struct device_node *root;
+	const char *model = "Unknown";
+
+	root = of_find_node_by_path("/");
+	if (root == NULL)
+		return;
+
+	model = of_get_property(root, "model", NULL);
+
+	printk(KERN_INFO "X-ES MPC85xx-based single-board computer: %s\n",
+	       model + strlen("xes,"));
+
+	xes_mpc85xx_fixups();
+
+#ifdef CONFIG_PCI
+	for_each_node_by_type(np, "pci") {
+		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
+		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
+			struct resource rsrc;
+			of_address_to_resource(np, 0, &rsrc);
+			if ((rsrc.start & 0xfffff) == primary_phb_addr)
+				fsl_add_bridge(np, 1);
+			else
+				fsl_add_bridge(np, 0);
+		}
+	}
+#endif
+
+#ifdef CONFIG_SMP
+	mpc85xx_smp_init();
+#endif
+}
+
+static struct of_device_id __initdata xes_mpc85xx_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
+	{ .compatible = "gianfar", },
+	{},
+};
+
+static int __init xes_mpc85xx_publish_devices(void)
+{
+	return of_platform_bus_probe(NULL, xes_mpc85xx_ids, NULL);
+}
+machine_device_initcall(xes_mpc8572, xes_mpc85xx_publish_devices);
+machine_device_initcall(xes_mpc8548, xes_mpc85xx_publish_devices);
+machine_device_initcall(xes_mpc8540, xes_mpc85xx_publish_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init xes_mpc8572_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (of_flat_dt_is_compatible(root, "xes,MPC8572")) {
+#ifdef CONFIG_PCI
+		primary_phb_addr = 0x8000;
+#endif
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+static int __init xes_mpc8548_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (of_flat_dt_is_compatible(root, "xes,MPC8548")) {
+#ifdef CONFIG_PCI
+		primary_phb_addr = 0xb000;
+#endif
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+static int __init xes_mpc8540_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (of_flat_dt_is_compatible(root, "xes,MPC8540")) {
+#ifdef CONFIG_PCI
+		primary_phb_addr = 0xb000;
+#endif
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+define_machine(xes_mpc8572) {
+	.name			= "X-ES MPC8572",
+	.probe			= xes_mpc8572_probe,
+	.setup_arch		= xes_mpc85xx_setup_arch,
+	.init_IRQ		= xes_mpc85xx_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
+
+define_machine(xes_mpc8548) {
+	.name			= "X-ES MPC8548",
+	.probe			= xes_mpc8548_probe,
+	.setup_arch		= xes_mpc85xx_setup_arch,
+	.init_IRQ		= xes_mpc85xx_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
+
+define_machine(xes_mpc8540) {
+	.name			= "X-ES MPC8540",
+	.probe			= xes_mpc8540_probe,
+	.setup_arch		= xes_mpc85xx_setup_arch,
+	.init_IRQ		= xes_mpc85xx_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index fdaf4ddaa95..9c7b64a3402 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -15,6 +15,7 @@ config MPC8641_HPCN
 	select DEFAULT_UIMAGE
 	select FSL_ULI1575
 	select HAS_RAPIDIO
+	select SWIOTLB
 	help
 	  This option enables support for the MPC8641 HPCN board.
 
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 51eec0cd551..627908a4cd7 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -37,6 +37,7 @@
 #include <linux/of_platform.h>
 #include <sysdev/fsl_pci.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/simple_gpio.h>
 
 #include "mpc86xx.h"
 
@@ -51,6 +52,9 @@ static struct of_device_id __initdata mpc8610_ids[] = {
 
 static int __init mpc8610_declare_of_platform_devices(void)
 {
+	/* Firstly, register PIXIS GPIOs. */
+	simple_gpiochip_init("fsl,fpga-pixis-gpio-bank");
+
 	/* Without this call, the SSI device driver won't get probed. */
 	of_platform_bus_probe(NULL, mpc8610_ids, NULL);
 
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 7e9e83c04a8..66327024a6a 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -19,6 +19,7 @@
 #include <linux/delay.h>
 #include <linux/seq_file.h>
 #include <linux/of_platform.h>
+#include <linux/lmb.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -27,6 +28,7 @@
 #include <asm/prom.h>
 #include <mm/mmu_decl.h>
 #include <asm/udbg.h>
+#include <asm/swiotlb.h>
 
 #include <asm/mpic.h>
 
@@ -70,7 +72,9 @@ mpc86xx_hpcn_setup_arch(void)
 {
 #ifdef CONFIG_PCI
 	struct device_node *np;
+	struct pci_controller *hose;
 #endif
+	dma_addr_t max = 0xffffffff;
 
 	if (ppc_md.progress)
 		ppc_md.progress("mpc86xx_hpcn_setup_arch()", 0);
@@ -83,6 +87,9 @@ mpc86xx_hpcn_setup_arch(void)
 			fsl_add_bridge(np, 1);
 		else
 			fsl_add_bridge(np, 0);
+		hose = pci_find_hose_for_OF_device(np);
+		max = min(max, hose->dma_window_base_cur +
+			  hose->dma_window_size);
 	}
 
 	ppc_md.pci_exclude_device = mpc86xx_exclude_device;
@@ -94,6 +101,13 @@ mpc86xx_hpcn_setup_arch(void)
 #ifdef CONFIG_SMP
 	mpc86xx_smp_init();
 #endif
+
+#ifdef CONFIG_SWIOTLB
+	if (lmb_end_of_DRAM() > max) {
+		ppc_swiotlb_enable = 1;
+		set_pci_dma_ops(&swiotlb_pci_dma_ops);
+	}
+#endif
 }
 
 
@@ -158,6 +172,7 @@ static int __init declare_of_platform_devices(void)
 	return 0;
 }
 machine_device_initcall(mpc86xx_hpcn, declare_of_platform_devices);
+machine_arch_initcall(mpc86xx_hpcn, swiotlb_setup_bus_notifier);
 
 define_machine(mpc86xx_hpcn) {
 	.name			= "MPC86xx HPCN",
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index cca6b4fc719..61187bec750 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -1,7 +1,7 @@
 config PPC64
 	bool "64-bit kernel"
 	default n
-	select HAVE_PERF_COUNTERS
+	select PPC_HAVE_PMU_SUPPORT
 	help
 	  This option selects whether a 32-bit or a 64-bit kernel
 	  will be built.
@@ -21,7 +21,7 @@ choice
 
 	  If unsure, select 52xx/6xx/7xx/74xx/82xx/83xx/86xx.
 
-config PPC_BOOK3S
+config PPC_BOOK3S_32
 	bool "512x/52xx/6xx/7xx/74xx/82xx/83xx/86xx"
 	select PPC_FPU
 
@@ -57,11 +57,14 @@ config E200
 
 endchoice
 
-config PPC_BOOK3S
-	default y
+config PPC_BOOK3S_64
+	def_bool y
 	depends on PPC64
 	select PPC_FPU
 
+config PPC_BOOK3S
+	def_bool y
+	depends on PPC_BOOK3S_32 || PPC_BOOK3S_64
 
 config POWER4_ONLY
 	bool "Optimize for POWER4"
@@ -75,6 +78,7 @@ config POWER4_ONLY
 config 6xx
 	def_bool y
 	depends on PPC32 && PPC_BOOK3S
+	select PPC_HAVE_PMU_SUPPORT
 
 config POWER3
 	bool
@@ -243,6 +247,15 @@ config VIRT_CPU_ACCOUNTING
 
 	  If in doubt, say Y here.
 
+config PPC_HAVE_PMU_SUPPORT
+       bool
+
+config PPC_PERF_CTRS
+       def_bool y
+       depends on PERF_COUNTERS && PPC_HAVE_PMU_SUPPORT
+       help
+         This enables the powerpc-specific perf_counter back-end.
+
 config SMP
 	depends on PPC_STD_MMU || FSL_BOOKE
 	bool "Symmetric multi-processing support"
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index f7419198e63..a6812ee0010 100644
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -1,4 +1,6 @@
 
+subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
+
 obj-$(CONFIG_FSL_ULI1575)	+= fsl_uli1575.o
 
 obj-$(CONFIG_PPC_PMAC)		+= powermac/
diff --git a/arch/powerpc/platforms/cell/spu_fault.c b/arch/powerpc/platforms/cell/spu_fault.c
index 95d8dadf2d8..d06ba87f1a1 100644
--- a/arch/powerpc/platforms/cell/spu_fault.c
+++ b/arch/powerpc/platforms/cell/spu_fault.c
@@ -70,7 +70,7 @@ int spu_handle_mm_fault(struct mm_struct *mm, unsigned long ea,
 	}
 
 	ret = 0;
-	*flt = handle_mm_fault(mm, vma, ea, is_write);
+	*flt = handle_mm_fault(mm, vma, ea, is_write ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(*flt & VM_FAULT_ERROR)) {
 		if (*flt & VM_FAULT_OOM) {
 			ret = -ENOMEM;
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index bfd60e4acce..0636a3df697 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -335,3 +335,62 @@ define_machine(maple) {
 	.progress		= maple_progress,
 	.power_save		= power4_idle,
 };
+
+#ifdef CONFIG_EDAC
+/*
+ * Register a platform device for CPC925 memory controller on
+ * Motorola ATCA-6101 blade.
+ */
+#define MAPLE_CPC925_MODEL	"Motorola,ATCA-6101"
+static int __init maple_cpc925_edac_setup(void)
+{
+	struct platform_device *pdev;
+	struct device_node *np = NULL;
+	struct resource r;
+	const unsigned char *model;
+	int ret;
+
+	np = of_find_node_by_path("/");
+	if (!np) {
+		printk(KERN_ERR "%s: Unable to get root node\n", __func__);
+		return -ENODEV;
+	}
+
+	model = (const unsigned char *)of_get_property(np, "model", NULL);
+	if (!model) {
+		printk(KERN_ERR "%s: Unabel to get model info\n", __func__);
+		return -ENODEV;
+	}
+
+	ret = strcmp(model, MAPLE_CPC925_MODEL);
+	of_node_put(np);
+
+	if (ret != 0)
+		return 0;
+
+	np = of_find_node_by_type(NULL, "memory-controller");
+	if (!np) {
+		printk(KERN_ERR "%s: Unable to find memory-controller node\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	ret = of_address_to_resource(np, 0, &r);
+	of_node_put(np);
+
+	if (ret < 0) {
+		printk(KERN_ERR "%s: Unable to get memory-controller reg\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	pdev = platform_device_register_simple("cpc925_edac", 0, &r, 1);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	printk(KERN_INFO "%s: CPC925 platform device created\n", __func__);
+
+	return 0;
+}
+machine_device_initcall(maple, maple_cpc925_edac_setup);
+#endif
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index 9a2a6e32f00..0e8db677125 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -122,7 +122,7 @@ static void eeh_enable_irq(struct pci_dev *dev)
  * passed back in "userdata".
  */
 
-static void eeh_report_error(struct pci_dev *dev, void *userdata)
+static int eeh_report_error(struct pci_dev *dev, void *userdata)
 {
 	enum pci_ers_result rc, *res = userdata;
 	struct pci_driver *driver = dev->driver;
@@ -130,19 +130,21 @@ static void eeh_report_error(struct pci_dev *dev, void *userdata)
 	dev->error_state = pci_channel_io_frozen;
 
 	if (!driver)
-		return;
+		return 0;
 
 	eeh_disable_irq(dev);
 
 	if (!driver->err_handler ||
 	    !driver->err_handler->error_detected)
-		return;
+		return 0;
 
 	rc = driver->err_handler->error_detected (dev, pci_channel_io_frozen);
 
 	/* A driver that needs a reset trumps all others */
 	if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
 	if (*res == PCI_ERS_RESULT_NONE) *res = rc;
+
+	return 0;
 }
 
 /**
@@ -153,7 +155,7 @@ static void eeh_report_error(struct pci_dev *dev, void *userdata)
  * Cumulative response passed back in "userdata".
  */
 
-static void eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata)
+static int eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata)
 {
 	enum pci_ers_result rc, *res = userdata;
 	struct pci_driver *driver = dev->driver;
@@ -161,26 +163,28 @@ static void eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata)
 	if (!driver ||
 	    !driver->err_handler ||
 	    !driver->err_handler->mmio_enabled)
-		return;
+		return 0;
 
 	rc = driver->err_handler->mmio_enabled (dev);
 
 	/* A driver that needs a reset trumps all others */
 	if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
 	if (*res == PCI_ERS_RESULT_NONE) *res = rc;
+
+	return 0;
 }
 
 /**
  * eeh_report_reset - tell device that slot has been reset
  */
 
-static void eeh_report_reset(struct pci_dev *dev, void *userdata)
+static int eeh_report_reset(struct pci_dev *dev, void *userdata)
 {
 	enum pci_ers_result rc, *res = userdata;
 	struct pci_driver *driver = dev->driver;
 
 	if (!driver)
-		return;
+		return 0;
 
 	dev->error_state = pci_channel_io_normal;
 
@@ -188,35 +192,39 @@ static void eeh_report_reset(struct pci_dev *dev, void *userdata)
 
 	if (!driver->err_handler ||
 	    !driver->err_handler->slot_reset)
-		return;
+		return 0;
 
 	rc = driver->err_handler->slot_reset(dev);
 	if ((*res == PCI_ERS_RESULT_NONE) ||
 	    (*res == PCI_ERS_RESULT_RECOVERED)) *res = rc;
 	if (*res == PCI_ERS_RESULT_DISCONNECT &&
 	     rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
+
+	return 0;
 }
 
 /**
  * eeh_report_resume - tell device to resume normal operations
  */
 
-static void eeh_report_resume(struct pci_dev *dev, void *userdata)
+static int eeh_report_resume(struct pci_dev *dev, void *userdata)
 {
 	struct pci_driver *driver = dev->driver;
 
 	dev->error_state = pci_channel_io_normal;
 
 	if (!driver)
-		return;
+		return 0;
 
 	eeh_enable_irq(dev);
 
 	if (!driver->err_handler ||
 	    !driver->err_handler->resume)
-		return;
+		return 0;
 
 	driver->err_handler->resume(dev);
+
+	return 0;
 }
 
 /**
@@ -226,22 +234,24 @@ static void eeh_report_resume(struct pci_dev *dev, void *userdata)
  * dead, and that no further recovery attempts will be made on it.
  */
 
-static void eeh_report_failure(struct pci_dev *dev, void *userdata)
+static int eeh_report_failure(struct pci_dev *dev, void *userdata)
 {
 	struct pci_driver *driver = dev->driver;
 
 	dev->error_state = pci_channel_io_perm_failure;
 
 	if (!driver)
-		return;
+		return 0;
 
 	eeh_disable_irq(dev);
 
 	if (!driver->err_handler ||
 	    !driver->err_handler->error_detected)
-		return;
+		return 0;
 
 	driver->err_handler->error_detected(dev, pci_channel_io_perm_failure);
+
+	return 0;
 }
 
 /* ------------------------------------------------------- */
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 2d1c87dd5d1..9d4b17462f1 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -1,3 +1,5 @@
+subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
+
 ifeq ($(CONFIG_PPC64),y)
 EXTRA_CFLAGS			+= -mno-minimal-toc
 endif
@@ -48,6 +50,9 @@ obj-$(CONFIG_PPC_DCR)		+= dcr.o
 obj-$(CONFIG_8xx)		+= mpc8xx_pic.o cpm1.o
 obj-$(CONFIG_UCODE_PATCH)	+= micropatch.o
 
+obj-$(CONFIG_PPC_MPC512x)	+= mpc5xxx_clocks.o
+obj-$(CONFIG_PPC_MPC52xx)	+= mpc5xxx_clocks.o
+
 ifeq ($(CONFIG_SUSPEND),y)
 obj-$(CONFIG_6xx)		+= 6xx-suspend.o
 endif
diff --git a/arch/powerpc/sysdev/mpc5xxx_clocks.c b/arch/powerpc/sysdev/mpc5xxx_clocks.c
new file mode 100644
index 00000000000..34e12f9995f
--- /dev/null
+++ b/arch/powerpc/sysdev/mpc5xxx_clocks.c
@@ -0,0 +1,33 @@
+/**
+ * 	mpc5xxx_get_bus_frequency - Find the bus frequency for a device
+ * 	@node:	device node
+ *
+ * 	Returns bus frequency (IPS on MPC512x, IPB on MPC52xx),
+ * 	or 0 if the bus frequency cannot be found.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+
+unsigned int
+mpc5xxx_get_bus_frequency(struct device_node *node)
+{
+	struct device_node *np;
+	const unsigned int *p_bus_freq = NULL;
+
+	of_node_get(node);
+	while (node) {
+		p_bus_freq = of_get_property(node, "bus-frequency", NULL);
+		if (p_bus_freq)
+			break;
+
+		np = of_get_parent(node);
+		of_node_put(node);
+		node = np;
+	}
+	if (node)
+		of_node_put(node);
+
+	return p_bus_freq ? *p_bus_freq : 0;
+}
+EXPORT_SYMBOL(mpc5xxx_get_bus_frequency);
diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile
index 9cb03b71b9d..85ab97ab840 100644
--- a/arch/powerpc/xmon/Makefile
+++ b/arch/powerpc/xmon/Makefile
@@ -1,5 +1,7 @@
 # Makefile for xmon
 
+subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
+
 ifdef CONFIG_PPC64
 EXTRA_CFLAGS += -mno-minimal-toc
 endif
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index a14dba0e4d6..e577839f307 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -94,6 +94,7 @@ config S390
 	select HAVE_KVM if 64BIT
 	select HAVE_ARCH_TRACEHOOK
 	select INIT_ALL_POSSIBLE
+	select HAVE_PERF_COUNTERS
 
 source "init/Kconfig"
 
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index d401d56c255..fcba206529f 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Thu Apr 23 09:29:52 2009
+# Linux kernel version: 2.6.30
+# Mon Jun 22 11:08:16 2009
 #
 CONFIG_SCHED_MC=y
 CONFIG_MMU=y
@@ -25,6 +25,7 @@ CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_S390=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -90,7 +91,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -103,7 +103,14 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -119,6 +126,11 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_HAVE_DEFAULT_NO_SPIN_MUTEXES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -150,7 +162,7 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_PREEMPT_NOTIFIERS=y
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
 
 #
 # Base setup
@@ -199,6 +211,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -218,9 +231,9 @@ CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # I/O subsystem configuration
@@ -257,6 +270,16 @@ CONFIG_KEXEC=y
 # CONFIG_ZFCPDUMP is not set
 CONFIG_S390_GUEST=y
 CONFIG_SECCOMP=y
+
+#
+# Power Management
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP_SMP=y
+CONFIG_PM_SLEEP=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION=""
 CONFIG_NET=y
 
 #
@@ -384,6 +407,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -446,6 +470,7 @@ CONFIG_CAN_BCM=m
 # CAN Device Drivers
 #
 CONFIG_CAN_VCAN=m
+# CONFIG_CAN_DEV is not set
 # CONFIG_CAN_DEBUG_DEVICES is not set
 # CONFIG_AF_RXRPC is not set
 # CONFIG_WIMAX is not set
@@ -524,10 +549,6 @@ CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
@@ -578,7 +599,6 @@ CONFIG_DM_MULTIPATH=m
 # CONFIG_DM_DELAY is not set
 # CONFIG_DM_UEVENT is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_IFB is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
@@ -595,6 +615,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
 # CONFIG_TR is not set
@@ -674,6 +695,11 @@ CONFIG_S390_TAPE_34XX=m
 # CONFIG_MONREADER is not set
 CONFIG_MONWRITER=m
 CONFIG_S390_VMUR=m
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
@@ -683,6 +709,10 @@ CONFIG_S390_VMUR=m
 # CONFIG_NEW_LEDS is not set
 CONFIG_ACCESSIBILITY=y
 # CONFIG_AUXDISPLAY is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -703,11 +733,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -865,19 +896,23 @@ CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FTRACE_SYSCALLS=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -886,6 +921,7 @@ CONFIG_TRACING_SUPPORT=y
 CONFIG_SAMPLES=y
 # CONFIG_SAMPLE_KOBJECT is not set
 # CONFIG_SAMPLE_KPROBES is not set
+# CONFIG_KMEMCHECK is not set
 
 #
 # Security options
diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h
index ec917d42ee6..7a3817a656d 100644
--- a/arch/s390/include/asm/cputime.h
+++ b/arch/s390/include/asm/cputime.h
@@ -178,7 +178,7 @@ cputime64_to_clock_t(cputime64_t cputime)
 }
 
 struct s390_idle_data {
-	spinlock_t lock;
+	unsigned int sequence;
 	unsigned long long idle_count;
 	unsigned long long idle_enter;
 	unsigned long long idle_time;
diff --git a/arch/s390/include/asm/debug.h b/arch/s390/include/asm/debug.h
index 9450ce6e32d..31ed5686a96 100644
--- a/arch/s390/include/asm/debug.h
+++ b/arch/s390/include/asm/debug.h
@@ -248,14 +248,5 @@ int debug_unregister_view(debug_info_t* id, struct debug_view* view);
 #define PRINT_FATAL(x...) printk ( KERN_DEBUG PRINTK_HEADER x )
 #endif				/* DASD_DEBUG */
 
-#undef DEBUG_MALLOC
-#ifdef DEBUG_MALLOC
-void *b;
-#define kmalloc(x...) (PRINT_INFO(" kmalloc %p\n",b=kmalloc(x)),b)
-#define kfree(x) PRINT_INFO(" kfree %p\n",x);kfree(x)
-#define get_zeroed_page(x...) (PRINT_INFO(" gfp %p\n",b=get_zeroed_page(x)),b)
-#define __get_free_pages(x...) (PRINT_INFO(" gfps %p\n",b=__get_free_pages(x)),b)
-#endif				/* DEBUG_MALLOC */
-
 #endif				/* __KERNEL__ */
 #endif				/* DEBUG_H */
diff --git a/arch/s390/include/asm/perf_counter.h b/arch/s390/include/asm/perf_counter.h
new file mode 100644
index 00000000000..a7205a3828c
--- /dev/null
+++ b/arch/s390/include/asm/perf_counter.h
@@ -0,0 +1,8 @@
+/*
+ * Performance counter support - s390 specific definitions.
+ *
+ * Copyright 2009 Martin Schwidefsky, IBM Corporation.
+ */
+
+static inline void set_perf_counter_pending(void) {}
+static inline void clear_perf_counter_pending(void) {}
diff --git a/arch/s390/include/asm/qdio.h b/arch/s390/include/asm/qdio.h
index 402d6dcf0d2..79d849f014f 100644
--- a/arch/s390/include/asm/qdio.h
+++ b/arch/s390/include/asm/qdio.h
@@ -380,7 +380,7 @@ extern int qdio_establish(struct qdio_initialize *);
 extern int qdio_activate(struct ccw_device *);
 
 extern int do_QDIO(struct ccw_device *cdev, unsigned int callflags,
-		   int q_nr, int bufnr, int count);
+		   int q_nr, unsigned int bufnr, unsigned int count);
 extern int qdio_cleanup(struct ccw_device*, int);
 extern int qdio_shutdown(struct ccw_device*, int);
 extern int qdio_free(struct ccw_device *);
diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c
index 002c70d3cb7..9ab188d67a3 100644
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -461,9 +461,6 @@ asmlinkage long sys32_execve(void)
 		result = rc;
 		goto out_putname;
 	}
-	task_lock(current);
-	current->ptrace &= ~PT_DTRACE;
-	task_unlock(current);
 	current->thread.fp_regs.fpc=0;
 	asm volatile("sfpc %0,0" : : "d" (0));
 	result = regs->gprs[2];
diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c
index 82ddfd3a75a..3e298e64f0d 100644
--- a/arch/s390/kernel/ftrace.c
+++ b/arch/s390/kernel/ftrace.c
@@ -190,7 +190,7 @@ unsigned long prepare_ftrace_return(unsigned long ip, unsigned long parent)
 		goto out;
 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		goto out;
-	if (ftrace_push_return_trace(parent, ip, &trace.depth) == -EBUSY)
+	if (ftrace_push_return_trace(parent, ip, &trace.depth, 0) == -EBUSY)
 		goto out;
 	trace.func = ftrace_mcount_call_adjust(ip) & PSW_ADDR_INSN;
 	/* Only trace if the calling function expects to. */
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index 9bb2f6241d9..86783efa24e 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -154,39 +154,35 @@ void __kprobes get_instruction_type(struct arch_specific_insn *ainsn)
 
 static int __kprobes swap_instruction(void *aref)
 {
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+	unsigned long status = kcb->kprobe_status;
 	struct ins_replace_args *args = aref;
+	int rc;
 
-	return probe_kernel_write(args->ptr, &args->new, sizeof(args->new));
+	kcb->kprobe_status = KPROBE_SWAP_INST;
+	rc = probe_kernel_write(args->ptr, &args->new, sizeof(args->new));
+	kcb->kprobe_status = status;
+	return rc;
 }
 
 void __kprobes arch_arm_kprobe(struct kprobe *p)
 {
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-	unsigned long status = kcb->kprobe_status;
 	struct ins_replace_args args;
 
 	args.ptr = p->addr;
 	args.old = p->opcode;
 	args.new = BREAKPOINT_INSTRUCTION;
-
-	kcb->kprobe_status = KPROBE_SWAP_INST;
 	stop_machine(swap_instruction, &args, NULL);
-	kcb->kprobe_status = status;
 }
 
 void __kprobes arch_disarm_kprobe(struct kprobe *p)
 {
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-	unsigned long status = kcb->kprobe_status;
 	struct ins_replace_args args;
 
 	args.ptr = p->addr;
 	args.old = BREAKPOINT_INSTRUCTION;
 	args.new = p->opcode;
-
-	kcb->kprobe_status = KPROBE_SWAP_INST;
 	stop_machine(swap_instruction, &args, NULL);
-	kcb->kprobe_status = status;
 }
 
 void __kprobes arch_remove_kprobe(struct kprobe *p)
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 355f7a30c3f..5a43f27eec1 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -266,9 +266,6 @@ SYSCALL_DEFINE0(vfork)
 
 asmlinkage void execve_tail(void)
 {
-	task_lock(current);
-	current->ptrace &= ~PT_DTRACE;
-	task_unlock(current);
 	current->thread.fp_regs.fpc = 0;
 	if (MACHINE_HAS_IEEE)
 		asm volatile("sfpc %0,%0" : : "d" (0));
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index fd8e3111a4e..2270730f535 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -856,13 +856,20 @@ static ssize_t show_idle_count(struct sys_device *dev,
 {
 	struct s390_idle_data *idle;
 	unsigned long long idle_count;
+	unsigned int sequence;
 
 	idle = &per_cpu(s390_idle, dev->id);
-	spin_lock(&idle->lock);
+repeat:
+	sequence = idle->sequence;
+	smp_rmb();
+	if (sequence & 1)
+		goto repeat;
 	idle_count = idle->idle_count;
 	if (idle->idle_enter)
 		idle_count++;
-	spin_unlock(&idle->lock);
+	smp_rmb();
+	if (idle->sequence != sequence)
+		goto repeat;
 	return sprintf(buf, "%llu\n", idle_count);
 }
 static SYSDEV_ATTR(idle_count, 0444, show_idle_count, NULL);
@@ -872,15 +879,22 @@ static ssize_t show_idle_time(struct sys_device *dev,
 {
 	struct s390_idle_data *idle;
 	unsigned long long now, idle_time, idle_enter;
+	unsigned int sequence;
 
 	idle = &per_cpu(s390_idle, dev->id);
-	spin_lock(&idle->lock);
 	now = get_clock();
+repeat:
+	sequence = idle->sequence;
+	smp_rmb();
+	if (sequence & 1)
+		goto repeat;
 	idle_time = idle->idle_time;
 	idle_enter = idle->idle_enter;
 	if (idle_enter != 0ULL && idle_enter < now)
 		idle_time += now - idle_enter;
-	spin_unlock(&idle->lock);
+	smp_rmb();
+	if (idle->sequence != sequence)
+		goto repeat;
 	return sprintf(buf, "%llu\n", idle_time >> 12);
 }
 static SYSDEV_ATTR(idle_time_us, 0444, show_idle_time, NULL);
@@ -908,11 +922,7 @@ static int __cpuinit smp_cpu_notify(struct notifier_block *self,
 	case CPU_ONLINE:
 	case CPU_ONLINE_FROZEN:
 		idle = &per_cpu(s390_idle, cpu);
-		spin_lock_irq(&idle->lock);
-		idle->idle_enter = 0;
-		idle->idle_time = 0;
-		idle->idle_count = 0;
-		spin_unlock_irq(&idle->lock);
+		memset(idle, 0, sizeof(struct s390_idle_data));
 		if (sysfs_create_group(&s->kobj, &cpu_online_attr_group))
 			return NOTIFY_BAD;
 		break;
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 215330a2c12..d4c8e9c47c8 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -36,7 +36,6 @@
 #include <linux/notifier.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
-#include <linux/bootmem.h>
 #include <asm/uaccess.h>
 #include <asm/delay.h>
 #include <asm/s390_ext.h>
@@ -62,9 +61,6 @@
 
 u64 sched_clock_base_cc = -1;	/* Force to data section. */
 
-static ext_int_info_t ext_int_info_cc;
-static ext_int_info_t ext_int_etr_cc;
-
 static DEFINE_PER_CPU(struct clock_event_device, comparators);
 
 /*
@@ -255,15 +251,11 @@ void __init time_init(void)
 	stp_reset();
 
 	/* request the clock comparator external interrupt */
-	if (register_early_external_interrupt(0x1004,
-					      clock_comparator_interrupt,
-					      &ext_int_info_cc) != 0)
+	if (register_external_interrupt(0x1004, clock_comparator_interrupt))
                 panic("Couldn't request external interrupt 0x1004");
 
 	/* request the timing alert external interrupt */
-	if (register_early_external_interrupt(0x1406,
-					      timing_alert_interrupt,
-					      &ext_int_etr_cc) != 0)
+	if (register_external_interrupt(0x1406, timing_alert_interrupt))
 		panic("Couldn't request external interrupt 0x1406");
 
 	if (clocksource_register(&clocksource_tod) != 0)
@@ -1445,14 +1437,14 @@ static void __init stp_reset(void)
 {
 	int rc;
 
-	stp_page = alloc_bootmem_pages(PAGE_SIZE);
+	stp_page = (void *) get_zeroed_page(GFP_ATOMIC);
 	rc = chsc_sstpc(stp_page, STP_OP_CTRL, 0x0000);
 	if (rc == 0)
 		set_bit(CLOCK_SYNC_HAS_STP, &clock_sync_flags);
 	else if (stp_online) {
 		pr_warning("The real or virtual hardware system does "
 			   "not provide an STP interface\n");
-		free_bootmem((unsigned long) stp_page, PAGE_SIZE);
+		free_page((unsigned long) stp_page);
 		stp_page = NULL;
 		stp_online = 0;
 	}
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index c8eb7255332..c41bb0d416e 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -25,13 +25,9 @@
 #include <asm/irq_regs.h>
 #include <asm/cputime.h>
 
-static ext_int_info_t ext_int_info_timer;
-
 static DEFINE_PER_CPU(struct vtimer_queue, virt_cpu_timer);
 
-DEFINE_PER_CPU(struct s390_idle_data, s390_idle) = {
-	.lock = __SPIN_LOCK_UNLOCKED(s390_idle.lock)
-};
+DEFINE_PER_CPU(struct s390_idle_data, s390_idle);
 
 static inline __u64 get_vtimer(void)
 {
@@ -153,11 +149,13 @@ void vtime_start_cpu(void)
 		vq->elapsed -= vq->idle - S390_lowcore.async_enter_timer;
 	}
 
-	spin_lock(&idle->lock);
+	idle->sequence++;
+	smp_wmb();
 	idle->idle_time += idle_time;
 	idle->idle_enter = 0ULL;
 	idle->idle_count++;
-	spin_unlock(&idle->lock);
+	smp_wmb();
+	idle->sequence++;
 }
 
 void vtime_stop_cpu(void)
@@ -244,15 +242,23 @@ cputime64_t s390_get_idle_time(int cpu)
 {
 	struct s390_idle_data *idle;
 	unsigned long long now, idle_time, idle_enter;
+	unsigned int sequence;
 
 	idle = &per_cpu(s390_idle, cpu);
-	spin_lock(&idle->lock);
+
 	now = get_clock();
+repeat:
+	sequence = idle->sequence;
+	smp_rmb();
+	if (sequence & 1)
+		goto repeat;
 	idle_time = 0;
 	idle_enter = idle->idle_enter;
 	if (idle_enter != 0ULL && idle_enter < now)
 		idle_time = now - idle_enter;
-	spin_unlock(&idle->lock);
+	smp_rmb();
+	if (idle->sequence != sequence)
+		goto repeat;
 	return idle_time;
 }
 
@@ -557,8 +563,7 @@ void init_cpu_vtimer(void)
 void __init vtime_init(void)
 {
 	/* request the cpu timer external interrupt */
-	if (register_early_external_interrupt(0x1005, do_cpu_timer_interrupt,
-					      &ext_int_info_timer) != 0)
+	if (register_external_interrupt(0x1005, do_cpu_timer_interrupt))
 		panic("Couldn't request external interrupt 0x1005");
 
 	/* Enable cpu timer interrupts on the boot cpu. */
diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c
index b0b84c35b0a..cb5d59eab0e 100644
--- a/arch/s390/lib/uaccess_pt.c
+++ b/arch/s390/lib/uaccess_pt.c
@@ -66,7 +66,7 @@ static int __handle_fault(struct mm_struct *mm, unsigned long address,
 	}
 
 survive:
-	fault = handle_mm_fault(mm, vma, address, write_access);
+	fault = handle_mm_fault(mm, vma, address, write_access ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 220a152c836..74eb26bf197 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -352,7 +352,7 @@ good_area:
 	 * make sure we exit gracefully rather than endlessly redo
 	 * the fault.
 	 */
-	fault = handle_mm_fault(mm, vma, address, write);
+	fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM) {
 			up_read(&mm->mmap_sem);
diff --git a/arch/s390/power/swsusp_asm64.S b/arch/s390/power/swsusp_asm64.S
index 3c74e7d827c..76d688da32f 100644
--- a/arch/s390/power/swsusp_asm64.S
+++ b/arch/s390/power/swsusp_asm64.S
@@ -109,10 +109,11 @@ swsusp_arch_resume:
 	aghi	%r15,-STACK_FRAME_OVERHEAD
 	stg	%r1,__SF_BACKCHAIN(%r15)
 
+#ifdef CONFIG_SMP
 	/* Save boot cpu number */
 	brasl	%r14,smp_get_phys_cpu_id
 	lgr	%r10,%r2
-
+#endif
 	/* Deactivate DAT */
 	stnsm	__SF_EMPTY(%r15),0xfb
 
@@ -177,11 +178,12 @@ swsusp_arch_resume:
 	/* Pointer to save arae */
 	lghi	%r13,0x1000
 
+#ifdef CONFIG_SMP
 	/* Switch CPUs */
 	lgr	%r2,%r10		/* get cpu id */
 	llgf	%r3,0x318(%r13)
 	brasl	%r14,smp_switch_boot_cpu_in_resume
-
+#endif
 	/* Restore prefix register */
 	spx	0x318(%r13)
 
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 586cd045e2d..e2bdd7b94fd 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -15,7 +15,9 @@ config SUPERH
 	select HAVE_IOREMAP_PROT if MMU
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_DMA_API_DEBUG
+	select HAVE_PERF_COUNTERS
 	select RTC_LIB
+	select GENERIC_ATOMIC64
 	help
 	  The SuperH is a RISC processor targeted for use in embedded systems
 	  and consumer electronics; it was also used in the Sega Dreamcast
@@ -50,6 +52,10 @@ config GENERIC_BUG
 	def_bool y
 	depends on BUG && SUPERH32
 
+config GENERIC_CSUM
+	def_bool y
+	depends on SUPERH64
+
 config GENERIC_FIND_NEXT_BIT
 	def_bool y
 
@@ -65,6 +71,9 @@ config GENERIC_HARDIRQS_NO__DO_IRQ
 config GENERIC_IRQ_PROBE
 	def_bool y
 
+config IRQ_PER_CPU
+	def_bool y
+
 config GENERIC_GPIO
 	def_bool n
 
@@ -145,6 +154,9 @@ config ARCH_NO_VIRT_TO_BUS
 config ARCH_HAS_DEFAULT_IDLE
 	def_bool y
 
+config ARCH_HAS_CPU_IDLE_WAIT
+	def_bool y
+
 config IO_TRAPPED
 	bool
 
@@ -405,6 +417,8 @@ config CPU_SUBTYPE_SH7786
 	select CPU_HAS_PTEAEX
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
+	select SYS_SUPPORTS_SMP
+	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
 
 config CPU_SUBTYPE_SHX3
 	bool "Support SH-X3 processor"
@@ -642,7 +656,7 @@ config NR_CPUS
 	int "Maximum number of CPUs (2-32)"
 	range 2 32
 	depends on SMP
-	default "4" if CPU_SHX3
+	default "4" if CPU_SUBTYPE_SHX3
 	default "2"
 	help
 	  This allows you to specify the maximum number of CPUs which this
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 8179cc9be9a..8ece0b5bd02 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -39,6 +39,7 @@ config EARLY_SCIF_CONSOLE_PORT
 				CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 || \
 				CPU_SUBTYPE_SH7343
 	default "0xffea0000" if CPU_SUBTYPE_SH7785
+	default "0xffeb0000" if CPU_SUBTYPE_SH7786
 	default "0xfffe8000" if CPU_SUBTYPE_SH7203
 	default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263
 	default "0xffe80000" if CPU_SH4
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 1c91b1f565d..2b1af0eefa6 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -175,6 +175,7 @@ config SH_URQUELL
 	bool "Urquell"
 	depends on CPU_SUBTYPE_SH7786
 	select ARCH_REQUIRE_GPIOLIB
+	select SYS_SUPPORTS_PCI
 
 config SH_MIGOR
 	bool "Migo-R"
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 1c4d83ef2a4..7ffd1b4315b 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -349,15 +349,6 @@ static int ov7725_power(struct device *dev, int mode)
 	return 0;
 }
 
-static struct ov772x_camera_info ov7725_info = {
-	.buswidth  = SOCAM_DATAWIDTH_8,
-	.flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
-	.edgectrl = OV772X_AUTO_EDGECTRL(0xf, 0),
-	.link = {
-		.power  = ov7725_power,
-	},
-};
-
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
 	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
 };
@@ -402,25 +393,48 @@ static struct platform_device sdcard_cn3_device = {
 	},
 };
 
-static struct platform_device *ap325rxa_devices[] __initdata = {
-	&smsc9118_device,
-	&ap325rxa_nor_flash_device,
-	&lcdc_device,
-	&ceu_device,
-	&nand_flash_device,
-	&sdcard_cn3_device,
-};
-
 static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("pcf8563", 0x51),
 	},
+};
+
+static struct i2c_board_info ap325rxa_i2c_camera[] = {
 	{
 		I2C_BOARD_INFO("ov772x", 0x21),
-		.platform_data = &ov7725_info,
 	},
 };
 
+static struct ov772x_camera_info ov7725_info = {
+	.buswidth	= SOCAM_DATAWIDTH_8,
+	.flags		= OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
+	.edgectrl	= OV772X_AUTO_EDGECTRL(0xf, 0),
+	.link = {
+		.power		= ov7725_power,
+		.board_info	= &ap325rxa_i2c_camera[0],
+		.i2c_adapter_id	= 0,
+		.module_name	= "ov772x",
+	},
+};
+
+static struct platform_device ap325rxa_camera = {
+	.name	= "soc-camera-pdrv",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &ov7725_info.link,
+	},
+};
+
+static struct platform_device *ap325rxa_devices[] __initdata = {
+	&smsc9118_device,
+	&ap325rxa_nor_flash_device,
+	&lcdc_device,
+	&ceu_device,
+	&nand_flash_device,
+	&sdcard_cn3_device,
+	&ap325rxa_camera,
+};
+
 static struct spi_board_info ap325rxa_spi_devices[] = {
 	{
 		.modalias = "mmc_spi",
diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
index 7be56fb06c1..42410a15d25 100644
--- a/arch/sh/boards/board-sh7785lcr.c
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -15,16 +15,18 @@
 #include <linux/fb.h>
 #include <linux/mtd/physmap.h>
 #include <linux/delay.h>
+#include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/i2c-pca-platform.h>
 #include <linux/i2c-algo-pca.h>
+#include <linux/usb/r8a66597.h>
 #include <linux/irq.h>
 #include <linux/clk.h>
 #include <linux/errno.h>
 #include <mach/sh7785lcr.h>
+#include <cpu/sh7785.h>
 #include <asm/heartbeat.h>
 #include <asm/clock.h>
-#include <cpu/sh7785.h>
 
 /*
  * NOTE: This board has 2 physical memory maps.
@@ -98,18 +100,21 @@ static struct platform_device nor_flash_device = {
 	.resource	= nor_flash_resources,
 };
 
+static struct r8a66597_platdata r8a66597_data = {
+	.xtal = R8A66597_PLATDATA_XTAL_12MHZ,
+	.vif = 1,
+};
+
 static struct resource r8a66597_usb_host_resources[] = {
 	[0] = {
-		.name	= "r8a66597_hcd",
 		.start	= R8A66597_ADDR,
 		.end	= R8A66597_ADDR + R8A66597_SIZE - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.name	= "r8a66597_hcd",
 		.start	= 2,
 		.end	= 2,
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
 	},
 };
 
@@ -119,6 +124,7 @@ static struct platform_device r8a66597_usb_host_device = {
 	.dev = {
 		.dma_mask		= NULL,
 		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &r8a66597_data,
 	},
 	.num_resources	= ARRAY_SIZE(r8a66597_usb_host_resources),
 	.resource	= r8a66597_usb_host_resources,
diff --git a/arch/sh/boards/board-urquell.c b/arch/sh/boards/board-urquell.c
index beb88c4da2c..36b8bac9b12 100644
--- a/arch/sh/boards/board-urquell.c
+++ b/arch/sh/boards/board-urquell.c
@@ -2,6 +2,7 @@
  * Renesas Technology Corp. SH7786 Urquell Support.
  *
  * Copyright (C) 2008  Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ * Copyright (C) 2009  Paul Mundt
  *
  * Based on board-sh7785lcr.c
  * Copyright (C) 2008  Yoshihiro Shimoda
@@ -178,6 +179,11 @@ static void __init urquell_init_irq(void)
 	plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK);
 }
 
+static int urquell_mode_pins(void)
+{
+	return __raw_readw(UBOARDREG(MDSWMR));
+}
+
 /* Initialize the board */
 static void __init urquell_setup(char **cmdline_p)
 {
@@ -193,4 +199,5 @@ static struct sh_machine_vector mv_urquell __initmv = {
 	.mv_name	= "Urquell",
 	.mv_setup	= urquell_setup,
 	.mv_init_irq	= urquell_init_irq,
+	.mv_mode_pins	= urquell_mode_pins,
 };
diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c
index 20fe72c515d..1639f891500 100644
--- a/arch/sh/boards/mach-highlander/setup.c
+++ b/arch/sh/boards/mach-highlander/setup.c
@@ -17,8 +17,11 @@
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <linux/types.h>
+#include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
 #include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/usb/r8a66597.h>
 #include <net/ax88796.h>
 #include <asm/machvec.h>
 #include <mach/highlander.h>
@@ -27,18 +30,21 @@
 #include <asm/io.h>
 #include <asm/io_trapped.h>
 
+static struct r8a66597_platdata r8a66597_data = {
+	.xtal = R8A66597_PLATDATA_XTAL_12MHZ,
+	.vif = 1,
+};
+
 static struct resource r8a66597_usb_host_resources[] = {
 	[0] = {
-		.name	= "r8a66597_hcd",
 		.start	= 0xA4200000,
 		.end	= 0xA42000FF,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.name	= "r8a66597_hcd",
 		.start	= IRQ_EXT1,		/* irq number */
 		.end	= IRQ_EXT1,
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
 	},
 };
 
@@ -48,6 +54,7 @@ static struct platform_device r8a66597_usb_host_device = {
 	.dev = {
 		.dma_mask		= NULL,		/* don't use dma */
 		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &r8a66597_data,
 	},
 	.num_resources	= ARRAY_SIZE(r8a66597_usb_host_resources),
 	.resource	= r8a66597_usb_host_resources,
@@ -178,6 +185,53 @@ static struct platform_device ax88796_device = {
 	.resource       = ax88796_resources,
 };
 
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 4 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 4,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+/* This config is flash board for mass production. */
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= PA_NORFLASH_ADDR,
+		.end	= PA_NORFLASH_ADDR + PA_NORFLASH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
 static struct resource smbus_resources[] = {
 	[0] = {
 		.start	= PA_SMCR,
@@ -209,6 +263,7 @@ static struct platform_device *r7780rp_devices[] __initdata = {
 	&m66592_usb_peripheral_device,
 	&heartbeat_device,
 	&smbus_device,
+	&nor_flash_device,
 #ifndef CONFIG_SH_R7780RP
 	&ax88796_device,
 #endif
@@ -247,9 +302,10 @@ device_initcall(r7780rp_devices_setup);
 /*
  * Platform specific clocks
  */
-static void ivdr_clk_enable(struct clk *clk)
+static int ivdr_clk_enable(struct clk *clk)
 {
 	ctrl_outw(ctrl_inw(PA_IVDRCTL) | (1 << IVDR_CK_ON), PA_IVDRCTL);
+	return 0;
 }
 
 static void ivdr_clk_disable(struct clk *clk)
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 6ed401cd315..f70f4644deb 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -381,21 +381,6 @@ static struct platform_device migor_ceu_device = {
 	},
 };
 
-static struct ov772x_camera_info ov7725_info = {
-	.buswidth  = SOCAM_DATAWIDTH_8,
-	.link = {
-		.power  = ov7725_power,
-	},
-};
-
-static struct tw9910_video_info tw9910_info = {
-	.buswidth = SOCAM_DATAWIDTH_8,
-	.mpout    = TW9910_MPO_FIELD,
-	.link = {
-		.power  = tw9910_power,
-	}
-};
-
 struct spi_gpio_platform_data sdcard_cn9_platform_data = {
 	.sck = GPIO_PTD0,
 	.mosi = GPIO_PTD1,
@@ -410,16 +395,6 @@ static struct platform_device sdcard_cn9_device = {
 	},
 };
 
-static struct platform_device *migor_devices[] __initdata = {
-	&smc91x_eth_device,
-	&sh_keysc_device,
-	&migor_lcdc_device,
-	&migor_ceu_device,
-	&migor_nor_flash_device,
-	&migor_nand_flash_device,
-	&sdcard_cn9_device,
-};
-
 static struct i2c_board_info migor_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("rs5c372b", 0x32),
@@ -428,16 +403,66 @@ static struct i2c_board_info migor_i2c_devices[] = {
 		I2C_BOARD_INFO("migor_ts", 0x51),
 		.irq = 38, /* IRQ6 */
 	},
+};
+
+static struct i2c_board_info migor_i2c_camera[] = {
 	{
 		I2C_BOARD_INFO("ov772x", 0x21),
-		.platform_data = &ov7725_info,
 	},
 	{
 		I2C_BOARD_INFO("tw9910", 0x45),
-		.platform_data = &tw9910_info,
 	},
 };
 
+static struct ov772x_camera_info ov7725_info = {
+	.buswidth	= SOCAM_DATAWIDTH_8,
+	.link = {
+		.power		= ov7725_power,
+		.board_info	= &migor_i2c_camera[0],
+		.i2c_adapter_id	= 0,
+		.module_name	= "ov772x",
+	},
+};
+
+static struct tw9910_video_info tw9910_info = {
+	.buswidth	= SOCAM_DATAWIDTH_8,
+	.mpout		= TW9910_MPO_FIELD,
+	.link = {
+		.power		= tw9910_power,
+		.board_info	= &migor_i2c_camera[1],
+		.i2c_adapter_id	= 0,
+		.module_name	= "tw9910",
+	}
+};
+
+static struct platform_device migor_camera[] = {
+	{
+		.name	= "soc-camera-pdrv",
+		.id	= 0,
+		.dev	= {
+			.platform_data = &ov7725_info.link,
+		},
+	}, {
+		.name	= "soc-camera-pdrv",
+		.id	= 1,
+		.dev	= {
+			.platform_data = &tw9910_info.link,
+		},
+	},
+};
+
+static struct platform_device *migor_devices[] __initdata = {
+	&smc91x_eth_device,
+	&sh_keysc_device,
+	&migor_lcdc_device,
+	&migor_ceu_device,
+	&migor_nor_flash_device,
+	&migor_nand_flash_device,
+	&sdcard_cn9_device,
+	&migor_camera[0],
+	&migor_camera[1],
+};
+
 static struct spi_board_info migor_spi_devices[] = {
 	{
 		.modalias = "mmc_spi",
diff --git a/arch/sh/boards/mach-rsk/devices-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c
index d8a65ea9166..4af3a771c05 100644
--- a/arch/sh/boards/mach-rsk/devices-rsk7203.c
+++ b/arch/sh/boards/mach-rsk/devices-rsk7203.c
@@ -26,13 +26,13 @@ static struct smsc911x_platform_config smsc911x_config = {
 	.phy_interface	= PHY_INTERFACE_MODE_MII,
 	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
-	.flags		= SMSC911X_USE_16BIT,
+	.flags		= SMSC911X_USE_32BIT | SMSC911X_SWAP_FIFO,
 };
 
 static struct resource smsc911x_resources[] = {
 	[0] = {
 		.start		= 0x24000000,
-		.end		= 0x24000000 + 0x100,
+		.end		= 0x240000ff,
 		.flags		= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -99,6 +99,10 @@ static int __init rsk7203_devices_setup(void)
 	gpio_request(GPIO_FN_TXD0, NULL);
 	gpio_request(GPIO_FN_RXD0, NULL);
 
+	/* Setup LAN9118: CS1 in 16-bit Big Endian Mode, IRQ0 at Port B */
+	ctrl_outl(0x36db0400, 0xfffc0008); /* CS1BCR */
+	gpio_request(GPIO_FN_IRQ0_PB, NULL);
+
 	return platform_add_devices(rsk7203_devices,
 				    ARRAY_SIZE(rsk7203_devices));
 }
diff --git a/arch/sh/boards/mach-se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c
index b8d43b638fc..121744c0871 100644
--- a/arch/sh/boards/mach-se/7780/irq.c
+++ b/arch/sh/boards/mach-se/7780/irq.c
@@ -12,7 +12,6 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#include <linux/irq.h>
 #include <linux/io.h>
 #include <mach-se/mach/se7780.h>
 
diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c
index a340492087f..8913ae39a80 100644
--- a/arch/sh/boards/mach-x3proto/setup.c
+++ b/arch/sh/boards/mach-x3proto/setup.c
@@ -15,6 +15,8 @@
 #include <linux/io.h>
 #include <linux/smc91x.h>
 #include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/usb/r8a66597.h>
 #include <asm/ilsel.h>
 
 static struct resource heartbeat_resources[] = {
@@ -58,17 +60,20 @@ static struct platform_device smc91x_device = {
 	},
 };
 
+static struct r8a66597_platdata r8a66597_data = {
+	.xtal = R8A66597_PLATDATA_XTAL_12MHZ,
+	.vif = 1,
+};
+
 static struct resource r8a66597_usb_host_resources[] = {
 	[0] = {
-		.name	= "r8a66597_hcd",
 		.start	= 0x18040000,
 		.end	= 0x18080000 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.name	= "r8a66597_hcd",
 		/* Filled in by ilsel */
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
 	},
 };
 
@@ -78,6 +83,7 @@ static struct platform_device r8a66597_usb_host_device = {
 	.dev = {
 		.dma_mask		= NULL,		/* don't use dma */
 		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &r8a66597_data,
 	},
 	.num_resources	= ARRAY_SIZE(r8a66597_usb_host_resources),
 	.resource	= r8a66597_usb_host_resources,
diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig
index 022f70e0ea0..6c38a43594f 100644
--- a/arch/sh/configs/ap325rxa_defconfig
+++ b/arch/sh/configs/ap325rxa_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 12:42:06 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 16:04:11 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -20,6 +20,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_SYS_SUPPORTS_CMT=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -75,7 +76,6 @@ CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -88,7 +88,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -180,6 +185,7 @@ CONFIG_CPU_SUBTYPE_SH7723=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x08000000
 CONFIG_29BIT=y
@@ -195,7 +201,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -208,9 +213,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -228,7 +233,6 @@ CONFIG_SH_FPU=y
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_PTEA=y
 CONFIG_CPU_HAS_FPU=y
 
 #
@@ -239,10 +243,10 @@ CONFIG_SH_AP325RXA=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_TMU=y
 # CONFIG_SH_TIMER_CMT is not set
-CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_SH_CLK_CPG=y
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -284,12 +288,14 @@ CONFIG_SECCOMP=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp"
 
@@ -372,6 +378,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -389,7 +396,11 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -532,6 +543,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -555,10 +567,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -575,6 +583,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -583,7 +592,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -628,6 +636,7 @@ CONFIG_SMSC911X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -751,7 +760,6 @@ CONFIG_I2C_SH_MOBILE=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -823,10 +831,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
+CONFIG_MEDIA_SUPPORT=y
 
 #
 # Multimedia core support
@@ -1017,6 +1022,7 @@ CONFIG_RTC_DRV_PCF8563=y
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_SH is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 CONFIG_UIO=y
@@ -1024,6 +1030,10 @@ CONFIG_UIO=y
 CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_UIO_SMX is not set
 # CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1045,10 +1055,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1204,28 +1215,12 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1347,3 +1342,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/cayman_defconfig b/arch/sh/configs/cayman_defconfig
index 40301f86a45..6b863cb1e24 100644
--- a/arch/sh/configs/cayman_defconfig
+++ b/arch/sh/configs/cayman_defconfig
@@ -1,24 +1,26 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 13:42:53 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 12:21:54 2009
 #
 CONFIG_SUPERH=y
 # CONFIG_SUPERH32 is not set
 CONFIG_SUPERH64=y
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/cayman_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CSUM=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 # CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -71,7 +73,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -84,8 +85,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -140,6 +146,7 @@ CONFIG_CPU_SUBTYPE_SH5_101=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x20000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x80000000
 CONFIG_MEMORY_SIZE=0x00400000
 CONFIG_32BIT=y
@@ -153,7 +160,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
@@ -172,9 +178,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -190,7 +196,6 @@ CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
 # CONFIG_SH64_FPU_DENORM_FLUSH is not set
-CONFIG_SH64_USER_MISALIGNED_FIXUP=y
 CONFIG_SH64_ID2815_WORKAROUND=y
 CONFIG_CPU_HAS_FPU=y
 
@@ -202,8 +207,13 @@ CONFIG_SH_CAYMAN=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=50000000
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -237,12 +247,14 @@ CONFIG_HZ=250
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_BOOT_LINK_OFFSET=0x00400000
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_CMDLINE_BOOL is not set
 
 #
@@ -332,6 +344,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -349,7 +362,11 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -402,7 +419,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -425,10 +444,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -446,6 +461,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -454,6 +470,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
@@ -468,7 +485,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -497,7 +513,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -530,6 +545,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -722,7 +738,6 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -781,6 +796,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -827,92 +843,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_DVB_CORE=y
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_CX88 is not set
-# CONFIG_VIDEO_CX23885 is not set
-# CONFIG_VIDEO_IVTV is not set
-# CONFIG_VIDEO_CX18 is not set
-# CONFIG_VIDEO_CAFE_CCIC is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_AV7110 is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1041,10 +972,15 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1065,10 +1001,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1228,29 +1165,28 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
+# CONFIG_KMEMCHECK is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_DEBUG_BOOTMEM is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_SH_NO_BSS_INIT is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 CONFIG_SH64_SR_WATCH=y
-# CONFIG_POOR_MANS_STRACE is not set
 
 #
 # Security options
@@ -1364,3 +1300,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig
index 1f3cc98330b..95717a041ed 100644
--- a/arch/sh/configs/dreamcast_defconfig
+++ b/arch/sh/configs/dreamcast_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 12:44:27 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 12:24:48 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -17,9 +17,11 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -72,7 +74,6 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -85,8 +86,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -177,6 +183,7 @@ CONFIG_CPU_SUBTYPE_SH7091=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x01000000
 CONFIG_29BIT=y
@@ -191,7 +198,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
@@ -210,9 +216,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -230,7 +236,6 @@ CONFIG_SH_FPU=y
 CONFIG_SH_STORE_QUEUES=y
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_PTEA=y
 CONFIG_CPU_HAS_FPU=y
 
 #
@@ -241,9 +246,10 @@ CONFIG_SH_DREAMCAST=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=49876504
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -307,12 +313,14 @@ CONFIG_SECCOMP=y
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC1,115200 panic=3"
@@ -401,6 +409,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -418,7 +427,11 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -463,6 +476,7 @@ CONFIG_MISC_DEVICES=y
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -488,7 +502,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -541,6 +554,7 @@ CONFIG_8139TOO=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -697,22 +711,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -841,10 +840,15 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -856,10 +860,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -956,28 +961,12 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1091,3 +1080,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/edosk7705_defconfig b/arch/sh/configs/edosk7705_defconfig
index d7092457ddc..497414c439f 100644
--- a/arch/sh/configs/edosk7705_defconfig
+++ b/arch/sh/configs/edosk7705_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 12:45:04 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 12:25:35 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -18,6 +18,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -57,7 +58,6 @@ CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 # CONFIG_PRINTK is not set
 # CONFIG_BUG is not set
@@ -70,7 +70,12 @@ CONFIG_EMBEDDED=y
 # CONFIG_EVENTFD is not set
 CONFIG_SHMEM=y
 # CONFIG_AIO is not set
+
+#
+# Performance Counters
+#
 # CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -136,6 +141,7 @@ CONFIG_CPU_SUBTYPE_SH7705=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x04000000
 CONFIG_29BIT=y
@@ -152,7 +158,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -166,9 +171,9 @@ CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -196,9 +201,10 @@ CONFIG_SH_EDOSK7705=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=31250000
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -243,6 +249,7 @@ CONFIG_GUSA=y
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_CMDLINE_BOOL is not set
 
 #
@@ -335,21 +342,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -369,17 +362,25 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
 # File systems
 #
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -418,26 +419,12 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -462,3 +449,4 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/edosk7760_defconfig b/arch/sh/configs/edosk7760_defconfig
index a822b1d8c11..77684ed9127 100644
--- a/arch/sh/configs/edosk7760_defconfig
+++ b/arch/sh/configs/edosk7760_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 12:45:25 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 12:25:55 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -19,6 +19,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -78,7 +79,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -91,8 +91,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -182,6 +187,7 @@ CONFIG_CPU_SUBTYPE_SH7760=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
 CONFIG_29BIT=y
@@ -196,7 +202,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -209,9 +214,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -229,7 +234,6 @@ CONFIG_SH_FPU=y
 CONFIG_SH_STORE_QUEUES=y
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_PTEA=y
 CONFIG_CPU_HAS_FPU=y
 
 #
@@ -240,9 +244,10 @@ CONFIG_SH_EDOSK7760=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -258,6 +263,7 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 #
 CONFIG_SH_DMA_API=y
 CONFIG_SH_DMA=y
+CONFIG_SH_DMA_IRQ_MULTI=y
 CONFIG_NR_ONCHIP_DMA_CHANNELS=8
 # CONFIG_NR_DMA_CHANNELS_BOOL is not set
 # CONFIG_SH_DMABRG is not set
@@ -289,12 +295,14 @@ CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x02000000
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="mem=64M console=ttySC2,115200 root=/dev/nfs rw nfsroot=192.168.0.3:/scripts/filesys ip=192.168.0.4"
@@ -373,6 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -390,7 +399,11 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -523,7 +536,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -548,6 +560,7 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -670,7 +683,6 @@ CONFIG_I2C_SH7760=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
@@ -703,22 +715,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -783,6 +780,11 @@ CONFIG_SND_JACK=y
 # CONFIG_SND_VERBOSE_PROCFS is not set
 CONFIG_SND_VERBOSE_PRINTK=y
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
@@ -803,10 +805,15 @@ CONFIG_SND_SOC_I2C_AND_SPI=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -829,10 +836,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1015,18 +1023,16 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1043,10 +1049,8 @@ CONFIG_EARLY_PRINTK=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
-# CONFIG_IRQSTACKS is not set
 CONFIG_DUMP_CODE=y
 # CONFIG_SH_NO_BSS_INIT is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1165,3 +1169,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/espt_defconfig b/arch/sh/configs/espt_defconfig
index c5b50077913..881128eeab3 100644
--- a/arch/sh/configs/espt_defconfig
+++ b/arch/sh/configs/espt_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 12:46:26 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 12:27:21 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -19,6 +19,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -79,7 +80,6 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -92,14 +92,19 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
+CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -184,6 +189,7 @@ CONFIG_CPU_SUBTYPE_SH7763=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
 CONFIG_29BIT=y
@@ -200,7 +206,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -215,9 +220,9 @@ CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -246,9 +251,10 @@ CONFIG_SH_ESPT=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=28
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=66666666
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -289,12 +295,14 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=bootp"
 
@@ -377,6 +385,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -529,10 +538,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -549,6 +554,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -557,7 +563,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -602,6 +607,7 @@ CONFIG_SH_ETH=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -720,22 +726,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -909,10 +900,15 @@ CONFIG_USB_STORAGE=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -933,10 +929,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1088,31 +1085,17 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1226,3 +1209,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig
index 8e13027eecc..3249d46fdc1 100644
--- a/arch/sh/configs/hp6xx_defconfig
+++ b/arch/sh/configs/hp6xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 12:47:15 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 12:28:12 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -20,6 +20,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -68,7 +69,6 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -81,7 +81,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -165,6 +170,7 @@ CONFIG_CPU_SUBTYPE_SH7709=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x0d000000
 CONFIG_MEMORY_SIZE=0x00400000
 CONFIG_29BIT=y
@@ -179,7 +185,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -192,9 +197,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -223,9 +228,10 @@ CONFIG_SH_HP6XX=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=22110000
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -249,7 +255,6 @@ CONFIG_NR_ONCHIP_DMA_CHANNELS=6
 CONFIG_HD6446X_SERIES=y
 CONFIG_HD64461=y
 CONFIG_HD64461_IRQ=36
-CONFIG_HD64461_IOBASE=0xb0000000
 CONFIG_HD64461_ENABLER=y
 
 #
@@ -275,12 +280,14 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_CMDLINE_BOOL is not set
 
 #
@@ -370,10 +377,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -387,6 +390,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -524,21 +528,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -651,9 +641,14 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -667,9 +662,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -798,27 +794,12 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -939,3 +920,4 @@ CONFIG_CRC32=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig
index 7f549aef0df..ba05739fda2 100644
--- a/arch/sh/configs/landisk_defconfig
+++ b/arch/sh/configs/landisk_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 12:47:48 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 12:28:45 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -20,6 +20,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -70,7 +71,6 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -83,8 +83,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -174,6 +179,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
 CONFIG_29BIT=y
@@ -188,7 +194,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -201,9 +206,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -221,7 +226,6 @@ CONFIG_SH_FPU=y
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_PTEA=y
 CONFIG_CPU_HAS_FPU=y
 
 #
@@ -237,9 +241,10 @@ CONFIG_SH_LANDISK=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -281,12 +286,14 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
 # CONFIG_CMDLINE_BOOL is not set
 
@@ -420,6 +427,7 @@ CONFIG_ATALK=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -437,7 +445,11 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -488,6 +500,7 @@ CONFIG_MISC_DEVICES=y
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -567,10 +580,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -588,6 +597,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -596,6 +606,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
@@ -610,7 +621,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -649,7 +659,6 @@ CONFIG_MD_RAID1=m
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -698,6 +707,7 @@ CONFIG_8139CP=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -895,65 +905,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_SOC_CAMERA is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VIDEO_CLASS is not set
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-# CONFIG_USB_GSPCA is not set
-# CONFIG_VIDEO_HDPVR is not set
-CONFIG_VIDEO_USBVIDEO=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-# CONFIG_USB_ZC0301 is not set
-CONFIG_USB_PWC=m
-# CONFIG_USB_PWC_DEBUG is not set
-CONFIG_USB_PWC_INPUT_EVDEV=y
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-CONFIG_USB_DSBR=m
-# CONFIG_USB_SI470X is not set
-# CONFIG_USB_MR800 is not set
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1005,7 +957,7 @@ CONFIG_HID_BELKIN=m
 CONFIG_HID_CHERRY=m
 CONFIG_HID_CHICONY=m
 CONFIG_HID_CYPRESS=m
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=m
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=m
@@ -1022,10 +974,11 @@ CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1051,6 +1004,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1191,10 +1145,15 @@ CONFIG_USB_SISUSBVGA_CON=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1217,10 +1176,11 @@ CONFIG_REISERFS_FS=y
 # CONFIG_REISERFS_FS_XATTR is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1383,28 +1343,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1518,3 +1463,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig
index a7db539f280..c0bc2fd033b 100644
--- a/arch/sh/configs/lboxre2_defconfig
+++ b/arch/sh/configs/lboxre2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 12:48:54 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 12:29:50 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -20,6 +20,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -70,7 +71,6 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -83,8 +83,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -174,6 +179,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
 CONFIG_29BIT=y
@@ -188,7 +194,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -201,9 +206,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -221,7 +226,6 @@ CONFIG_SH_FPU=y
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_PTEA=y
 CONFIG_CPU_HAS_FPU=y
 
 #
@@ -237,9 +241,10 @@ CONFIG_SH_LBOX_RE2=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=40000000
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -281,12 +286,14 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1"
@@ -418,6 +425,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -435,7 +443,11 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -485,6 +497,7 @@ CONFIG_MISC_DEVICES=y
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -507,10 +520,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -528,6 +537,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -536,6 +546,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
@@ -550,7 +561,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -641,7 +651,6 @@ CONFIG_PATA_PLATFORM=y
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -694,6 +703,7 @@ CONFIG_8139TOO_TUNE_TWISTER=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -890,22 +900,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -998,9 +993,14 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_SH is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1020,10 +1020,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1166,28 +1167,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1301,3 +1287,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig
index 58bec61506f..c5859e82d91 100644
--- a/arch/sh/configs/magicpanelr2_defconfig
+++ b/arch/sh/configs/magicpanelr2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 12:49:32 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 12:30:31 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -19,6 +19,8 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_CMT=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -77,7 +79,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -90,7 +91,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -180,6 +186,7 @@ CONFIG_CPU_SUBTYPE_SH7720=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x0C000000
 CONFIG_MEMORY_SIZE=0x03F00000
 CONFIG_29BIT=y
@@ -194,7 +201,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -207,9 +213,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -243,9 +249,11 @@ CONFIG_SH_MAGIC_PANEL_R2_VERSION=3
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_TIMER_TMU=y
+CONFIG_SH_TIMER_CMT=y
 CONFIG_SH_PCLK_FREQ=24000000
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -290,12 +298,14 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_CMDLINE_BOOL is not set
 
 #
@@ -372,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -389,7 +400,11 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -528,7 +543,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -572,6 +586,7 @@ CONFIG_SMSC911X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -727,22 +742,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -804,9 +804,14 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -823,12 +828,14 @@ CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -1012,17 +1019,15 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1031,6 +1036,7 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4430000
@@ -1039,10 +1045,8 @@ CONFIG_EARLY_PRINTK=y
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
-# CONFIG_IRQSTACKS is not set
 CONFIG_DUMP_CODE=y
 # CONFIG_SH_NO_BSS_INIT is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1074,3 +1078,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig
index 2886fc84bc1..e5a21e1d625 100644
--- a/arch/sh/configs/microdev_defconfig
+++ b/arch/sh/configs/microdev_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 12:50:51 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 12:31:56 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -19,6 +19,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -74,7 +75,6 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -87,7 +87,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -171,6 +176,7 @@ CONFIG_CPU_SUBTYPE_SH4_202=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x04000000
 CONFIG_29BIT=y
@@ -185,7 +191,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
@@ -204,9 +209,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -224,7 +229,6 @@ CONFIG_SH_FPU=y
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_PTEA=y
 CONFIG_CPU_HAS_FPU=y
 
 #
@@ -235,9 +239,10 @@ CONFIG_SH_SH4202_MICRODEV=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=66000000
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -282,12 +287,14 @@ CONFIG_HZ=250
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/hda1"
@@ -371,6 +378,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -388,7 +396,11 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -460,7 +472,6 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -485,6 +496,7 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
 
@@ -582,22 +594,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -636,10 +633,15 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -659,10 +661,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -812,28 +815,12 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -957,3 +944,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index 8ecceb4bf27..da627d22c00 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 12:51:34 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 16:06:48 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -21,6 +21,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_SYS_SUPPORTS_CMT=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -76,7 +77,6 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -89,14 +89,19 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
+CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -184,6 +189,7 @@ CONFIG_CPU_SUBTYPE_SH7722=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
 CONFIG_29BIT=y
@@ -202,7 +208,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -217,9 +222,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -238,7 +243,6 @@ CONFIG_SH_DSP=y
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_PTEA=y
 CONFIG_CPU_HAS_DSP=y
 
 #
@@ -252,10 +256,10 @@ CONFIG_SH_MIGOR_QVGA=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_TMU=y
 # CONFIG_SH_TIMER_CMT is not set
-CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_SH_CLK_CPG=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -296,12 +300,14 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
 
@@ -384,6 +390,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -403,7 +410,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -534,6 +545,7 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -557,10 +569,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -577,6 +585,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -585,7 +594,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -610,6 +618,7 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -740,7 +749,6 @@ CONFIG_I2C_SH_MOBILE=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -796,10 +804,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
+CONFIG_MEDIA_SUPPORT=y
 
 #
 # Multimedia core support
@@ -899,6 +904,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
 # CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_IMX is not set
 CONFIG_USB_GADGET_M66592=y
@@ -909,9 +915,11 @@ CONFIG_SUPERH_BUILT_IN_M66592=y
 # CONFIG_USB_GADGET_CI13XXX is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
 # CONFIG_USB_ETH is not set
 # CONFIG_USB_GADGETFS is not set
 # CONFIG_USB_FILE_STORAGE is not set
@@ -983,6 +991,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 CONFIG_UIO=y
@@ -990,6 +999,10 @@ CONFIG_UIO=y
 CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_UIO_SMX is not set
 # CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1001,12 +1014,14 @@ CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -1111,24 +1126,11 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
@@ -1137,7 +1139,6 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
 CONFIG_EARLY_PRINTK=y
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1259,3 +1260,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/polaris_defconfig b/arch/sh/configs/polaris_defconfig
index 2b950728618..67edd3f3f9b 100644
--- a/arch/sh/configs/polaris_defconfig
+++ b/arch/sh/configs/polaris_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 12:52:19 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 12:33:28 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -19,6 +19,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -78,7 +79,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -91,7 +91,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -181,6 +186,7 @@ CONFIG_CPU_SUBTYPE_SH7709=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x0C000000
 CONFIG_MEMORY_SIZE=0x04000000
 CONFIG_29BIT=y
@@ -195,7 +201,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -208,9 +213,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -240,9 +245,10 @@ CONFIG_SH_POLARIS=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=33000000
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -288,12 +294,14 @@ CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/mtdblock2 rootfstype=jffs2 mem=63M mtdparts=physmap-flash.0:0x00100000(bootloader)ro,0x00500000(Kernel)ro,0x00A00000(Filesystem)"
 
@@ -369,6 +377,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -522,7 +531,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -566,6 +574,7 @@ CONFIG_SMSC911X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -678,22 +687,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -756,9 +750,14 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -770,12 +769,14 @@ CONFIG_RTC_DRV_SH=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -928,18 +929,16 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -948,6 +947,7 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0x00000000
@@ -956,10 +956,8 @@ CONFIG_EARLY_PRINTK=y
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
-# CONFIG_IRQSTACKS is not set
 CONFIG_DUMP_CODE=y
 # CONFIG_SH_NO_BSS_INIT is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -990,3 +988,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig
index 943da63a385..107a8e337ec 100644
--- a/arch/sh/configs/r7780mp_defconfig
+++ b/arch/sh/configs/r7780mp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 12:53:28 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 12:34:44 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -20,6 +20,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -79,7 +80,6 @@ CONFIG_UID16=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -92,15 +92,20 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
+CONFIG_MARKERS=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -185,6 +190,7 @@ CONFIG_CPU_SUBTYPE_SH7780=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x08000000
 # CONFIG_29BIT is not set
@@ -203,7 +209,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
@@ -222,9 +227,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -258,9 +263,10 @@ CONFIG_SH_R7780MP=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=28
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -301,12 +307,14 @@ CONFIG_KEXEC=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
 
@@ -404,6 +412,7 @@ CONFIG_LLC=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -423,7 +432,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -445,7 +458,91 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
@@ -477,7 +574,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 CONFIG_EEPROM_93CX6=y
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -500,10 +599,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -521,6 +616,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -529,6 +625,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
@@ -543,7 +640,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -632,7 +728,6 @@ CONFIG_PATA_PLATFORM=y
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -686,6 +781,7 @@ CONFIG_8139TOO_8129=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 CONFIG_VIA_RHINE=m
 CONFIG_VIA_RHINE_MMIO=y
 # CONFIG_SC92031 is not set
@@ -894,7 +990,6 @@ CONFIG_I2C_HIGHLANDER=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -953,6 +1048,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -988,22 +1084,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1111,9 +1192,14 @@ CONFIG_RTC_DRV_RS5C372=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1134,10 +1220,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1145,6 +1232,7 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
+# CONFIG_CUSE is not set
 
 #
 # Caches
@@ -1190,6 +1278,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1328,41 +1417,40 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_EARLY_SCIF_CONSOLE is not set
-CONFIG_EARLY_PRINTK=y
+# CONFIG_SH_STANDARD_BIOS is not set
+CONFIG_EARLY_SCIF_CONSOLE=y
+CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
+# CONFIG_EARLY_PRINTK is not set
 # CONFIG_DEBUG_BOOTMEM is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
-# CONFIG_IRQSTACKS is not set
 CONFIG_DUMP_CODE=y
 # CONFIG_SH_NO_BSS_INIT is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1486,3 +1574,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
index 82658f67239..8a3dc300db4 100644
--- a/arch/sh/configs/r7785rp_defconfig
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 12:55:10 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 12:37:20 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -21,6 +21,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -80,7 +81,6 @@ CONFIG_UID16=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -93,15 +93,20 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
+CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
@@ -189,6 +194,7 @@ CONFIG_CPU_SUBTYPE_SH7785=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x08000000
 # CONFIG_29BIT is not set
@@ -211,7 +217,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_HUGETLB_PAGE_SIZE_64K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 CONFIG_HUGETLB_PAGE_SIZE_1MB=y
@@ -232,9 +237,9 @@ CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -252,7 +257,6 @@ CONFIG_SH_FPU=y
 CONFIG_SH_STORE_QUEUES=y
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_PTEA=y
 CONFIG_CPU_HAS_FPU=y
 
 #
@@ -267,9 +271,9 @@ CONFIG_SH_R7785RP=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=28
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_SH_CLK_CPG=y
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -326,12 +330,14 @@ CONFIG_KEXEC=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
 
@@ -429,6 +435,7 @@ CONFIG_LLC=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -449,7 +456,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -503,7 +514,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 CONFIG_EEPROM_93CX6=y
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -526,10 +539,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -547,6 +556,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -555,6 +565,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
@@ -569,7 +580,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -658,7 +668,6 @@ CONFIG_PATA_PLATFORM=y
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -692,6 +701,7 @@ CONFIG_AX88796_93CX6=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -899,7 +909,6 @@ CONFIG_I2C_HIGHLANDER=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -983,6 +992,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1019,22 +1029,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1195,9 +1190,14 @@ CONFIG_RTC_DRV_RS5C372=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1218,10 +1218,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1229,6 +1230,7 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
+# CONFIG_CUSE is not set
 
 #
 # Caches
@@ -1413,25 +1415,25 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
@@ -1444,10 +1446,8 @@ CONFIG_EARLY_PRINTK=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_4KSTACKS=y
-# CONFIG_IRQSTACKS is not set
 CONFIG_DUMP_CODE=y
 # CONFIG_SH_NO_BSS_INIT is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1572,3 +1572,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/rsk7201_defconfig b/arch/sh/configs/rsk7201_defconfig
index fa4395768d1..55c3656a75c 100644
--- a/arch/sh/configs/rsk7201_defconfig
+++ b/arch/sh/configs/rsk7201_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 12:56:29 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 12:39:54 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -15,10 +15,11 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 # CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
+CONFIG_SYS_SUPPORTS_MTU2=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -74,7 +75,6 @@ CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -86,14 +86,19 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_AIO is not set
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
+CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -175,6 +180,7 @@ CONFIG_CPU_SUBTYPE_SH7201=y
 #
 CONFIG_QUICKLIST=y
 CONFIG_PAGE_OFFSET=0x00000000
+CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x01000000
 CONFIG_29BIT=y
@@ -188,7 +194,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -201,7 +206,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
 
 #
 # Cache configuration
@@ -228,10 +234,14 @@ CONFIG_SH_RSK7201=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_MTU2=y
-CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_TIMER_MTU2=y
 CONFIG_SH_PCLK_FREQ=40000000
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 CONFIG_SH_CLK_MD=0
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -267,12 +277,14 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
 
@@ -506,21 +518,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -578,9 +576,14 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -593,11 +596,13 @@ CONFIG_EXT2_FS=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-# CONFIG_FILE_LOCKING is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_FILE_LOCKING is not set
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -696,30 +701,17 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -749,3 +741,4 @@ CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
index e3a65f819f0..69e619967b7 100644
--- a/arch/sh/configs/rsk7203_defconfig
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 12:57:06 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 12:40:44 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -15,11 +15,12 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 # CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_CMT=y
+CONFIG_SYS_SUPPORTS_MTU2=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -81,7 +82,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -93,14 +93,19 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
+CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -182,6 +187,7 @@ CONFIG_CPU_SUBTYPE_SH7203=y
 #
 CONFIG_QUICKLIST=y
 CONFIG_PAGE_OFFSET=0x00000000
+CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x01000000
 CONFIG_29BIT=y
@@ -195,7 +201,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -208,7 +213,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
 
 #
 # Cache configuration
@@ -235,11 +241,15 @@ CONFIG_SH_RSK7203=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_CMT=y
-# CONFIG_SH_MTU2 is not set
-CONFIG_SH_TIMER_IRQ=142
+CONFIG_SH_TIMER_CMT=y
+CONFIG_SH_TIMER_MTU2=y
 CONFIG_SH_PCLK_FREQ=16670800
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 CONFIG_SH_CLK_MD=0
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -290,12 +300,14 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
 
@@ -375,6 +387,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -393,7 +406,11 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -528,7 +545,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -572,6 +588,7 @@ CONFIG_SMSC911X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -705,24 +722,9 @@ CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_DEBUG is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -758,7 +760,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -775,10 +777,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -931,9 +934,14 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -945,12 +953,14 @@ CONFIG_RTC_DRV_SH=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -1029,7 +1039,46 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 
 #
@@ -1094,23 +1143,24 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
@@ -1123,10 +1173,8 @@ CONFIG_EARLY_PRINTK=y
 CONFIG_DEBUG_BOOTMEM=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_IRQSTACKS is not set
 CONFIG_DUMP_CODE=y
 # CONFIG_SH_NO_BSS_INIT is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1156,3 +1204,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig
index a4a59f6205a..c6e9b1c0fa3 100644
--- a/arch/sh/configs/rts7751r2d1_defconfig
+++ b/arch/sh/configs/rts7751r2d1_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 12:58:13 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 12:42:26 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -20,6 +20,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -71,7 +72,6 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -84,15 +84,20 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
+CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -176,6 +181,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
 CONFIG_29BIT=y
@@ -190,7 +196,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -203,9 +208,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -223,7 +228,6 @@ CONFIG_SH_FPU=y
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_PTEA=y
 CONFIG_CPU_HAS_FPU=y
 
 #
@@ -245,9 +249,10 @@ CONFIG_RTS7751R2D_1=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=60000000
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -289,12 +294,14 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00010000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=serial"
@@ -385,6 +392,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -404,7 +412,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -455,6 +467,7 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -477,10 +490,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -498,6 +507,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -506,6 +516,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
@@ -520,7 +531,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -609,7 +619,6 @@ CONFIG_PATA_PLATFORM=y
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -663,6 +672,7 @@ CONFIG_8139TOO=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -871,23 +881,7 @@ CONFIG_MFD_SM501=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -989,6 +983,11 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_OPL3_LIB=m
 CONFIG_SND_AC97_CODEC=m
@@ -1015,6 +1014,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_OXYGEN is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
 # CONFIG_SND_LAYLA20 is not set
@@ -1045,6 +1045,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_INTEL8X0 is not set
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
 # CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -1089,7 +1090,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1106,10 +1107,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1135,6 +1137,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
@@ -1268,9 +1271,14 @@ CONFIG_RTC_DRV_R9701=y
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_SH is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1284,10 +1292,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1428,24 +1437,11 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
@@ -1454,7 +1450,6 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
 CONFIG_EARLY_PRINTK=y
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1568,3 +1563,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig
index a860435b884..bc10469d31f 100644
--- a/arch/sh/configs/rts7751r2dplus_defconfig
+++ b/arch/sh/configs/rts7751r2dplus_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 12:59:01 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 12:43:19 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -20,6 +20,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -71,7 +72,6 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -84,15 +84,20 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
+CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -176,6 +181,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
 CONFIG_29BIT=y
@@ -190,7 +196,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -203,9 +208,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -223,7 +228,6 @@ CONFIG_SH_FPU=y
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_PTEA=y
 CONFIG_CPU_HAS_FPU=y
 
 #
@@ -245,9 +249,10 @@ CONFIG_RTS7751R2D_PLUS=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=60000000
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -289,12 +294,14 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00010000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=serial"
@@ -385,6 +392,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -404,7 +412,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -540,6 +552,7 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -562,10 +575,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -583,6 +592,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -591,6 +601,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
@@ -605,7 +616,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -694,7 +704,6 @@ CONFIG_PATA_PLATFORM=y
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -748,6 +757,7 @@ CONFIG_8139TOO=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -956,23 +966,7 @@ CONFIG_MFD_SM501=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1074,6 +1068,11 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_OPL3_LIB=m
 CONFIG_SND_AC97_CODEC=m
@@ -1100,6 +1099,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_OXYGEN is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
 # CONFIG_SND_LAYLA20 is not set
@@ -1130,6 +1130,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_INTEL8X0 is not set
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
 # CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -1174,7 +1175,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1191,10 +1192,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1220,6 +1222,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
@@ -1353,9 +1356,14 @@ CONFIG_RTC_DRV_R9701=y
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_SH is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1369,10 +1377,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1423,6 +1432,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1513,24 +1523,11 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
@@ -1539,7 +1536,6 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
 CONFIG_EARLY_PRINTK=y
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1653,3 +1649,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig
index a629b79a184..753fb276e9f 100644
--- a/arch/sh/configs/sdk7780_defconfig
+++ b/arch/sh/configs/sdk7780_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 12:59:32 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 12:43:54 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -20,6 +20,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -75,7 +76,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -88,9 +88,14 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -181,6 +186,7 @@ CONFIG_CPU_SUBTYPE_SH7780=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x08000000
 # CONFIG_29BIT is not set
@@ -199,7 +205,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
@@ -218,9 +223,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -252,9 +257,10 @@ CONFIG_SH_SDK7780_BASE=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=28
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -300,12 +306,14 @@ CONFIG_SCHED_HRTICK=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x01800000
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="mem=128M console=tty0 console=ttySC0,115200 ip=bootp root=/dev/nfs nfsroot=192.168.0.1:/home/rootfs"
 
@@ -441,6 +449,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -490,7 +499,11 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -613,10 +626,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -633,6 +642,7 @@ CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -641,6 +651,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
@@ -655,7 +666,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -756,7 +766,6 @@ CONFIG_BLK_DEV_DM=y
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -789,6 +798,7 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_NET_POCKET is not set
 # CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
@@ -971,22 +981,7 @@ CONFIG_SSB_DRIVER_PCICORE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1100,7 +1095,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1117,10 +1112,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1146,6 +1142,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1247,10 +1244,15 @@ CONFIG_LEDS_CLASS=y
 # CONFIG_LEDS_TRIGGERS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1272,11 +1274,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1471,18 +1474,16 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1498,10 +1499,8 @@ CONFIG_SH_STANDARD_BIOS=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
-# CONFIG_IRQSTACKS is not set
 CONFIG_DUMP_CODE=y
 # CONFIG_SH_NO_BSS_INIT is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1619,3 +1618,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index 5caf85a3312..8dd2f130e49 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 13:01:02 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 12:46:15 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -15,11 +15,12 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 # CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_CMT=y
+CONFIG_SYS_SUPPORTS_MTU2=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -47,6 +48,7 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_TASKSTATS is not set
 CONFIG_AUDIT=y
 CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_TREE=y
 
 #
 # RCU Subsystem
@@ -92,7 +94,6 @@ CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -104,14 +105,19 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
+CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -194,6 +200,7 @@ CONFIG_CPU_SUBTYPE_SH7206=y
 #
 CONFIG_QUICKLIST=y
 CONFIG_PAGE_OFFSET=0x00000000
+CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
 CONFIG_29BIT=y
@@ -207,7 +214,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -220,7 +226,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
 
 #
 # Cache configuration
@@ -245,11 +252,15 @@ CONFIG_SH_7206_SOLUTION_ENGINE=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_CMT=y
-# CONFIG_SH_MTU2 is not set
-CONFIG_SH_TIMER_IRQ=140
+CONFIG_SH_TIMER_CMT=y
+CONFIG_SH_TIMER_MTU2=y
 CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 CONFIG_SH_CLK_MD=6
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -300,12 +311,14 @@ CONFIG_HZ=1000
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial"
 
@@ -390,6 +403,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -408,7 +422,11 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -543,7 +561,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -568,6 +585,7 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -650,22 +668,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -722,9 +725,14 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -737,12 +745,14 @@ CONFIG_EXT2_FS=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -884,23 +894,25 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
@@ -911,10 +923,8 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_BOOTMEM is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_IRQSTACKS is not set
 CONFIG_DUMP_CODE=y
 # CONFIG_SH_NO_BSS_INIT is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1037,3 +1047,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
index 004d531716d..18f46debf92 100644
--- a/arch/sh/configs/se7343_defconfig
+++ b/arch/sh/configs/se7343_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 13:01:44 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 12:47:07 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -20,6 +20,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_SYS_SUPPORTS_CMT=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -75,7 +76,6 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -88,7 +88,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -180,6 +185,7 @@ CONFIG_CPU_SUBTYPE_SH7343=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x01000000
 CONFIG_29BIT=y
@@ -194,7 +200,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -207,9 +212,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -239,10 +244,10 @@ CONFIG_SH_7343_SOLUTION_ENGINE=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_TMU=y
 # CONFIG_SH_TIMER_CMT is not set
-CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_SH_CLK_CPG=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -283,12 +288,14 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC0,115200"
 
@@ -367,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -384,7 +392,11 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -518,10 +530,6 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -542,7 +550,6 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -574,6 +581,7 @@ CONFIG_MII=y
 CONFIG_USB_USBNET=y
 # CONFIG_USB_NET_AX8817X is not set
 CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_CDC_EEM is not set
 CONFIG_USB_NET_DM9601=y
 # CONFIG_USB_NET_SMSC95XX is not set
 # CONFIG_USB_NET_GL620A is not set
@@ -583,6 +591,7 @@ CONFIG_USB_NET_DM9601=y
 # CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
 # CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_USB_NET_INT51X1 is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -696,7 +705,6 @@ CONFIG_I2C_SH_MOBILE=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -729,106 +737,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_SOC_CAMERA is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VIDEO_CLASS is not set
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-CONFIG_USB_GSPCA=m
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_STV06XX is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_HDPVR is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_CX231XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-CONFIG_USB_PWC_INPUT_EVDEV=y
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
-# CONFIG_USB_MR800 is not set
-# CONFIG_RADIO_TEA5764 is not set
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -894,6 +803,11 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
@@ -927,7 +841,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -944,10 +858,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -1042,6 +957,7 @@ CONFIG_USB_ISP116X_HCD=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
@@ -1050,6 +966,10 @@ CONFIG_UIO=y
 # CONFIG_UIO_PDRV_GENIRQ is not set
 # CONFIG_UIO_SMX is not set
 # CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1069,12 +989,14 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -1167,7 +1089,46 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 
 #
@@ -1191,21 +1152,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1213,7 +1160,6 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
 CONFIG_EARLY_PRINTK=y
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1328,3 +1274,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig
index edbece52afc..724bb77c9dc 100644
--- a/arch/sh/configs/se7619_defconfig
+++ b/arch/sh/configs/se7619_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 13:02:32 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 12:47:56 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -15,8 +15,8 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 # CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_CMT=y
@@ -62,7 +62,6 @@ CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -74,7 +73,12 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 # CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -155,6 +159,7 @@ CONFIG_CPU_SUBTYPE_SH7619=y
 #
 CONFIG_QUICKLIST=y
 CONFIG_PAGE_OFFSET=0x00000000
+CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
 CONFIG_29BIT=y
@@ -168,7 +173,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -181,7 +185,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
 
 #
 # Cache configuration
@@ -206,10 +211,14 @@ CONFIG_SH_7619_SOLUTION_ENGINE=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_CMT=y
-CONFIG_SH_TIMER_IRQ=86
+CONFIG_SH_TIMER_CMT=y
 CONFIG_SH_PCLK_FREQ=31250000
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 CONFIG_SH_CLK_MD=5
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -245,12 +254,14 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_CMDLINE_BOOL is not set
 
 #
@@ -479,21 +490,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -541,10 +538,15 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -556,11 +558,13 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -644,25 +648,12 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -689,3 +680,4 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7705_defconfig b/arch/sh/configs/se7705_defconfig
index bae161c6683..6ca6a2fc06e 100644
--- a/arch/sh/configs/se7705_defconfig
+++ b/arch/sh/configs/se7705_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 13:02:52 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 12:48:18 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -19,6 +19,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -70,7 +71,6 @@ CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -83,7 +83,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -171,6 +176,7 @@ CONFIG_CPU_SUBTYPE_SH7705=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x02000000
 CONFIG_29BIT=y
@@ -185,7 +191,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -198,9 +203,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -231,9 +236,10 @@ CONFIG_SH_SOLUTION_ENGINE=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -275,12 +281,14 @@ CONFIG_HZ=250
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_CMDLINE_BOOL is not set
 
 #
@@ -361,6 +369,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -378,7 +387,11 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -507,7 +520,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -532,6 +544,7 @@ CONFIG_STNIC=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
 
@@ -662,22 +675,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -725,10 +723,15 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -742,9 +745,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -856,27 +860,12 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -991,3 +980,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig
index 330043f3c31..b8aae11bc8f 100644
--- a/arch/sh/configs/se7712_defconfig
+++ b/arch/sh/configs/se7712_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 13:03:27 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 12:49:00 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -18,6 +18,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -71,7 +72,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
@@ -84,7 +84,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -173,6 +178,7 @@ CONFIG_CPU_SUBTYPE_SH7712=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x02000000
 CONFIG_29BIT=y
@@ -187,7 +193,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -200,9 +205,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -233,9 +238,10 @@ CONFIG_SH_SOLUTION_ENGINE=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=66666666
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -277,12 +283,14 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
 
@@ -374,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -427,7 +436,11 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -568,10 +581,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -588,6 +597,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -601,7 +611,6 @@ CONFIG_ATA_SFF=y
 CONFIG_PATA_PLATFORM=y
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -646,6 +655,7 @@ CONFIG_SH_ETH=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
 
@@ -730,22 +740,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -802,10 +797,15 @@ CONFIG_LEDS_TRIGGERS=y
 # iptables trigger is under Netfilter config (LED target)
 #
 # CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -827,12 +827,14 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -975,17 +977,15 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -994,16 +994,15 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_DEBUG_BOOTMEM is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
-# CONFIG_IRQSTACKS is not set
 # CONFIG_DUMP_CODE is not set
 # CONFIG_SH_NO_BSS_INIT is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1129,3 +1128,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7721_defconfig b/arch/sh/configs/se7721_defconfig
index 56478918440..306e21c4253 100644
--- a/arch/sh/configs/se7721_defconfig
+++ b/arch/sh/configs/se7721_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 13:04:19 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 12:50:49 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -18,6 +18,8 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_CMT=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -75,7 +77,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
@@ -88,7 +89,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -177,6 +183,7 @@ CONFIG_CPU_SUBTYPE_SH7721=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x02000000
 CONFIG_29BIT=y
@@ -191,7 +198,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -204,9 +210,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -236,9 +242,11 @@ CONFIG_SH_7721_SOLUTION_ENGINE=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_TIMER_TMU=y
+CONFIG_SH_TIMER_CMT=y
 CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -280,12 +288,14 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda2"
 
@@ -377,6 +387,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -430,7 +441,11 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -572,10 +587,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -601,7 +612,6 @@ CONFIG_ATA_SFF=y
 CONFIG_PATA_PLATFORM=y
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -735,22 +745,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -786,7 +781,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -803,10 +798,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -934,10 +930,15 @@ CONFIG_LEDS_TRIGGERS=y
 # iptables trigger is under Netfilter config (LED target)
 #
 # CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -959,12 +960,14 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -1134,17 +1137,15 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1153,16 +1154,15 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_DEBUG_BOOTMEM is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
-# CONFIG_IRQSTACKS is not set
 # CONFIG_DUMP_CODE is not set
 # CONFIG_SH_NO_BSS_INIT is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1288,3 +1288,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7722_defconfig b/arch/sh/configs/se7722_defconfig
index 726fdbdb280..61943829984 100644
--- a/arch/sh/configs/se7722_defconfig
+++ b/arch/sh/configs/se7722_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 13:05:29 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 12:54:24 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -21,6 +21,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_SYS_SUPPORTS_CMT=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -78,7 +79,6 @@ CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -91,8 +91,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -187,6 +192,7 @@ CONFIG_CPU_SUBTYPE_SH7722=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
 CONFIG_29BIT=y
@@ -205,7 +211,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
@@ -226,9 +231,9 @@ CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -247,7 +252,6 @@ CONFIG_SH_DSP=y
 CONFIG_SH_STORE_QUEUES=y
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_PTEA=y
 CONFIG_CPU_HAS_DSP=y
 
 #
@@ -260,10 +264,10 @@ CONFIG_SH_7722_SOLUTION_ENGINE=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_TMU=y
 # CONFIG_SH_TIMER_CMT is not set
-CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_SH_CLK_CPG=y
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -305,12 +309,14 @@ CONFIG_KEXEC=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_CMDLINE_BOOL is not set
 
 #
@@ -389,6 +395,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -406,7 +413,11 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -467,10 +478,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -487,6 +494,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -500,7 +508,6 @@ CONFIG_ATA_SFF=y
 CONFIG_PATA_PLATFORM=y
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -525,6 +532,7 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
 
@@ -656,22 +664,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -756,9 +749,14 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -779,10 +777,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -882,22 +881,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
@@ -905,7 +889,6 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1020,3 +1003,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig
index 96d2587467e..3840270283e 100644
--- a/arch/sh/configs/se7724_defconfig
+++ b/arch/sh/configs/se7724_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Tue May 26 13:18:09 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 16:09:05 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -76,7 +76,6 @@ CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -89,7 +88,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -209,9 +213,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -229,7 +233,6 @@ CONFIG_SH_FPU=y
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_PTEA=y
 CONFIG_CPU_HAS_FPU=y
 
 #
@@ -244,6 +247,7 @@ CONFIG_SH_7724_SOLUTION_ENGINE=y
 CONFIG_SH_TIMER_TMU=y
 # CONFIG_SH_TIMER_CMT is not set
 CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_SH_CLK_CPG=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -284,6 +288,7 @@ CONFIG_SECCOMP=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
@@ -373,6 +378,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -390,7 +396,11 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -534,6 +544,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -557,10 +568,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -577,6 +584,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -585,7 +593,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -617,6 +624,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
+# CONFIG_SH_ETH is not set
 CONFIG_SMC91X=y
 # CONFIG_ENC28J60 is not set
 # CONFIG_ETHOC is not set
@@ -631,6 +639,7 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -772,7 +781,6 @@ CONFIG_I2C_SH_MOBILE=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -844,10 +852,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
+CONFIG_MEDIA_SUPPORT=y
 
 #
 # Multimedia core support
@@ -1019,7 +1024,7 @@ CONFIG_USB_HID=y
 # CONFIG_HID_CHERRY is not set
 # CONFIG_HID_CHICONY is not set
 # CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 # CONFIG_HID_EZKEY is not set
 # CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
@@ -1033,10 +1038,11 @@ CONFIG_USB_HID=y
 # CONFIG_HID_SAMSUNG is not set
 # CONFIG_HID_SONY is not set
 # CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -1228,6 +1234,10 @@ CONFIG_UIO=y
 CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_UIO_SMX is not set
 # CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1249,10 +1259,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1408,22 +1419,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1550,3 +1546,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7750_defconfig b/arch/sh/configs/se7750_defconfig
index ed1a1230f63..564bf7bdce6 100644
--- a/arch/sh/configs/se7750_defconfig
+++ b/arch/sh/configs/se7750_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 13:06:02 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 13:00:01 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -19,6 +19,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -71,7 +72,6 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -84,7 +84,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -173,6 +178,7 @@ CONFIG_CPU_SUBTYPE_SH7750=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x02000000
 CONFIG_29BIT=y
@@ -187,7 +193,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -200,9 +205,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -221,7 +226,6 @@ CONFIG_SH_FPU=y
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_PTEA=y
 CONFIG_CPU_HAS_FPU=y
 
 #
@@ -233,9 +237,10 @@ CONFIG_SH_SOLUTION_ENGINE=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -277,12 +282,14 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
 # CONFIG_CMDLINE_BOOL is not set
 
@@ -365,6 +372,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -382,7 +390,11 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -535,10 +547,6 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -555,6 +563,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -563,7 +572,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -588,6 +596,7 @@ CONFIG_STNIC=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
 
@@ -697,22 +706,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -751,10 +745,15 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -766,10 +765,11 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -897,27 +897,12 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1032,3 +1017,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7751_defconfig b/arch/sh/configs/se7751_defconfig
index 55f3b788e0c..eb431c43e99 100644
--- a/arch/sh/configs/se7751_defconfig
+++ b/arch/sh/configs/se7751_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 13:06:44 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 13:02:26 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -19,6 +19,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -74,7 +75,6 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -87,7 +87,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -176,6 +181,7 @@ CONFIG_CPU_SUBTYPE_SH7751=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
 CONFIG_29BIT=y
@@ -190,7 +196,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -203,9 +208,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -224,7 +229,6 @@ CONFIG_SH_FPU=y
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_PTEA=y
 CONFIG_CPU_HAS_FPU=y
 
 #
@@ -237,9 +241,10 @@ CONFIG_SH_7751_SOLUTION_ENGINE=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=60000000
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -281,12 +286,14 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00010000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC1,38400"
@@ -389,6 +396,7 @@ CONFIG_IP_NF_QUEUE=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -406,7 +414,11 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -535,7 +547,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -560,6 +571,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
 
@@ -660,22 +672,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -714,10 +711,15 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -731,10 +733,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -842,27 +845,12 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -978,3 +966,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7780_defconfig b/arch/sh/configs/se7780_defconfig
index c4f0af32efa..756beec5fb2 100644
--- a/arch/sh/configs/se7780_defconfig
+++ b/arch/sh/configs/se7780_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 13:07:14 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 13:03:56 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -20,6 +20,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -68,7 +69,6 @@ CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -81,8 +81,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -170,6 +175,7 @@ CONFIG_CPU_SUBTYPE_SH7780=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x08000000
 CONFIG_29BIT=y
@@ -186,7 +192,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -200,9 +205,9 @@ CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -233,9 +238,10 @@ CONFIG_SH_7780_SOLUTION_ENGINE=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=28
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -280,6 +286,7 @@ CONFIG_GUSA=y
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00810000
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC0.115200 root=/dev/sda1"
 
@@ -323,6 +330,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
 # CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
@@ -377,7 +385,11 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
@@ -503,6 +515,7 @@ CONFIG_MISC_DEVICES=y
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -524,10 +537,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -544,6 +553,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -552,6 +562,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
@@ -566,7 +577,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -643,7 +653,6 @@ CONFIG_SATA_SIL=y
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -709,6 +718,7 @@ CONFIG_NET_PCI=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
@@ -842,22 +852,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -965,7 +960,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -982,10 +977,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1097,10 +1093,15 @@ CONFIG_USB_STORAGE=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1114,9 +1115,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1254,28 +1256,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1385,3 +1372,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sh03_defconfig b/arch/sh/configs/sh03_defconfig
index f9c6e51dc0b..7fedaaee861 100644
--- a/arch/sh/configs/sh03_defconfig
+++ b/arch/sh/configs/sh03_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 13:07:56 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 13:04:41 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -17,9 +17,11 @@ CONFIG_GENERIC_IRQ_PROBE=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -77,7 +79,6 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -90,15 +91,20 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
+CONFIG_MARKERS=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -183,6 +189,7 @@ CONFIG_CPU_SUBTYPE_SH7751=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x08000000
 CONFIG_29BIT=y
@@ -197,7 +204,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -210,9 +216,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -231,7 +237,6 @@ CONFIG_SH_FPU=y
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_PTEA=y
 CONFIG_CPU_HAS_FPU=y
 
 #
@@ -243,9 +248,10 @@ CONFIG_SH_SH03=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=60000000
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -287,12 +293,14 @@ CONFIG_HZ=250
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00004000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC1,115200 mem=64M root=/dev/nfs"
@@ -388,6 +396,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -406,7 +415,11 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -454,6 +467,7 @@ CONFIG_MISC_DEVICES=y
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -526,10 +540,6 @@ CONFIG_BLK_DEV_SR=m
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -547,6 +557,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -555,6 +566,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
@@ -569,7 +581,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -598,7 +609,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -647,6 +657,7 @@ CONFIG_8139CP=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -845,22 +856,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -916,10 +912,15 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -942,10 +943,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1120,25 +1122,11 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
@@ -1146,7 +1134,6 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1273,3 +1260,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sh7710voipgw_defconfig b/arch/sh/configs/sh7710voipgw_defconfig
index 48b58098cf8..c296ca5d95c 100644
--- a/arch/sh/configs/sh7710voipgw_defconfig
+++ b/arch/sh/configs/sh7710voipgw_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 13:09:16 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 13:06:13 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -19,6 +19,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -74,7 +75,6 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -87,7 +87,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -176,6 +181,7 @@ CONFIG_CPU_SUBTYPE_SH7710=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x00800000
 CONFIG_29BIT=y
@@ -190,7 +196,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -203,9 +208,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -234,9 +239,10 @@ CONFIG_CPU_HAS_DSP=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=32768000
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -278,12 +284,14 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_CMDLINE_BOOL is not set
 
 #
@@ -380,6 +388,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -434,7 +443,11 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -564,7 +577,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -590,6 +602,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
 
@@ -693,22 +706,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -756,10 +754,15 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -771,12 +774,14 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -881,28 +886,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1017,3 +1007,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sh7724_generic_defconfig b/arch/sh/configs/sh7724_generic_defconfig
index ec8f18c7684..ba26be1b413 100644
--- a/arch/sh/configs/sh7724_generic_defconfig
+++ b/arch/sh/configs/sh7724_generic_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 13:09:47 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 13:06:48 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -20,6 +20,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_SYS_SUPPORTS_CMT=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -79,7 +80,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -92,14 +92,19 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
+CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -180,6 +185,7 @@ CONFIG_CPU_SUBTYPE_SH7724=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x04000000
 CONFIG_29BIT=y
@@ -197,7 +203,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -215,9 +220,9 @@ CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -235,20 +240,20 @@ CONFIG_SH_FPU=y
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_PTEA=y
 CONFIG_CPU_HAS_FPU=y
 
 #
 # Board support
 #
+# CONFIG_SH_7724_SOLUTION_ENGINE is not set
 
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_TIMER_CMT=y
-CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=41666666
+CONFIG_SH_CLK_CPG=y
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -305,12 +310,14 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_CMDLINE_BOOL is not set
 
 #
@@ -335,6 +342,7 @@ CONFIG_PM=y
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATION_NVS=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION=""
 CONFIG_CPU_IDLE=y
@@ -451,7 +459,6 @@ CONFIG_I2C_SH_MOBILE=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -484,21 +491,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -570,6 +563,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 CONFIG_UIO=y
@@ -577,6 +571,10 @@ CONFIG_UIO=y
 CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_UIO_SMX is not set
 # CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -588,11 +586,13 @@ CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -657,30 +657,17 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -705,3 +692,4 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig
index f77bc7998d2..b1d9b2311e3 100644
--- a/arch/sh/configs/sh7763rdp_defconfig
+++ b/arch/sh/configs/sh7763rdp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 13:10:12 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 13:07:15 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -19,6 +19,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -79,7 +80,6 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -92,14 +92,19 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
+CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -184,6 +189,7 @@ CONFIG_CPU_SUBTYPE_SH7763=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
 CONFIG_29BIT=y
@@ -200,7 +206,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -215,9 +220,9 @@ CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -246,9 +251,10 @@ CONFIG_SH_SH7763RDP=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=28
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=66666666
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -289,12 +295,14 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10"
 
@@ -377,6 +385,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -396,7 +405,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -536,10 +549,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -556,6 +565,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -564,7 +574,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -609,6 +618,7 @@ CONFIG_SH_ETH=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -727,22 +737,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -931,10 +926,15 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -955,10 +955,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1109,31 +1110,17 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1246,3 +1233,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sh7770_generic_defconfig b/arch/sh/configs/sh7770_generic_defconfig
index d6489b46ca5..426a88f7a23 100644
--- a/arch/sh/configs/sh7770_generic_defconfig
+++ b/arch/sh/configs/sh7770_generic_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc4
-# Tue May 12 14:48:21 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 13:08:05 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -79,7 +79,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -92,14 +91,19 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
+CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -178,6 +182,7 @@ CONFIG_CPU_SUBTYPE_SH7770=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x04000000
 CONFIG_29BIT=y
@@ -211,9 +216,9 @@ CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -240,9 +245,10 @@ CONFIG_CPU_HAS_FPU=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=41666666
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -299,6 +305,7 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
@@ -328,6 +335,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
 CONFIG_PM_SLEEP=y
+CONFIG_HIBERNATION_NVS=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION=""
 CONFIG_CPU_IDLE=y
@@ -444,7 +452,6 @@ CONFIG_I2C_SH_MOBILE=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -477,21 +484,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -571,6 +564,10 @@ CONFIG_UIO=y
 CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_UIO_SMX is not set
 # CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -582,11 +579,13 @@ CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -651,23 +650,11 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
@@ -698,3 +685,4 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sh7785lcr_32bit_defconfig b/arch/sh/configs/sh7785lcr_32bit_defconfig
index 1c55b800d12..ed316f602db 100644
--- a/arch/sh/configs/sh7785lcr_32bit_defconfig
+++ b/arch/sh/configs/sh7785lcr_32bit_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 13:10:53 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 13:08:29 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -21,6 +21,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -80,7 +81,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -93,8 +93,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -187,6 +192,7 @@ CONFIG_CPU_SUBTYPE_SH7785=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x40000000
 CONFIG_MEMORY_SIZE=0x20000000
 # CONFIG_29BIT is not set
@@ -209,7 +215,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -224,9 +229,9 @@ CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -244,7 +249,6 @@ CONFIG_SH_FPU=y
 CONFIG_SH_STORE_QUEUES=y
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_PTEA=y
 CONFIG_CPU_HAS_FPU=y
 
 #
@@ -256,9 +260,9 @@ CONFIG_SH_SH7785LCR=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=28
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=50000000
+CONFIG_SH_CLK_CPG=y
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -300,12 +304,14 @@ CONFIG_KEXEC=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_CMDLINE_BOOL is not set
 
 #
@@ -400,6 +406,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -418,7 +425,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -561,10 +572,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -656,7 +663,6 @@ CONFIG_SATA_SIL=y
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -861,7 +867,6 @@ CONFIG_I2C_PCA_PLATFORM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -894,22 +899,7 @@ CONFIG_MFD_SM501=y
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1017,7 +1007,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1034,10 +1024,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1063,6 +1054,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1210,9 +1202,14 @@ CONFIG_RTC_DRV_RS5C372=y
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_SH is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1232,10 +1229,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1428,18 +1426,16 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1454,10 +1450,8 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
-# CONFIG_IRQSTACKS is not set
 # CONFIG_DUMP_CODE is not set
 # CONFIG_SH_NO_BSS_INIT is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1580,3 +1574,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig
index 4385fe97a78..004e6f5e8a6 100644
--- a/arch/sh/configs/sh7785lcr_defconfig
+++ b/arch/sh/configs/sh7785lcr_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 13:11:48 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 13:09:34 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -21,6 +21,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -80,7 +81,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -93,8 +93,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -187,6 +192,7 @@ CONFIG_CPU_SUBTYPE_SH7785=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x08000000
 CONFIG_29BIT=y
@@ -204,7 +210,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -217,9 +222,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -237,7 +242,6 @@ CONFIG_SH_FPU=y
 CONFIG_SH_STORE_QUEUES=y
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_PTEA=y
 CONFIG_CPU_HAS_FPU=y
 
 #
@@ -250,9 +254,9 @@ CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=28
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=50000000
+CONFIG_SH_CLK_CPG=y
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -294,12 +298,14 @@ CONFIG_KEXEC=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_CMDLINE_BOOL is not set
 
 #
@@ -394,6 +400,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -412,7 +419,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -555,10 +566,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -650,7 +657,6 @@ CONFIG_SATA_SIL=y
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -855,7 +861,6 @@ CONFIG_I2C_PCA_PLATFORM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -888,22 +893,7 @@ CONFIG_MFD_SM501=y
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1011,7 +1001,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1028,10 +1018,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1057,6 +1048,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1204,9 +1196,14 @@ CONFIG_RTC_DRV_RS5C372=y
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_SH is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1226,10 +1223,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1422,18 +1420,16 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1448,10 +1444,8 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
-# CONFIG_IRQSTACKS is not set
 # CONFIG_DUMP_CODE is not set
 # CONFIG_SH_NO_BSS_INIT is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1574,3 +1568,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/shmin_defconfig b/arch/sh/configs/shmin_defconfig
index 4e120256ec6..ad7d60972fc 100644
--- a/arch/sh/configs/shmin_defconfig
+++ b/arch/sh/configs/shmin_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 13:12:41 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 13:10:33 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -18,6 +18,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -64,7 +65,6 @@ CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
@@ -77,7 +77,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
@@ -159,6 +164,7 @@ CONFIG_CPU_SUBTYPE_SH7706=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x00800000
 CONFIG_29BIT=y
@@ -173,7 +179,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -186,9 +191,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -216,9 +221,10 @@ CONFIG_SH_SHMIN=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=32000000
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -260,12 +266,14 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00210000
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC1,115200 root=1f01 mtdparts=phys_mapped_flash:64k(firm)ro,-(sys) netdev=34,0x300,eth0 "
 
@@ -345,6 +353,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -362,7 +371,11 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -489,7 +502,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -514,6 +526,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
 
@@ -599,22 +612,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -653,10 +651,15 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -668,11 +671,13 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -773,27 +778,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 CONFIG_EARLY_PRINTK=y
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -905,3 +896,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig
index c088144925f..207b0c9a8cd 100644
--- a/arch/sh/configs/shx3_defconfig
+++ b/arch/sh/configs/shx3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 13:13:12 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 13:11:03 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -23,6 +23,7 @@ CONFIG_GENERIC_LOCKBREAK=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_SYS_SUPPORTS_SMP=y
 CONFIG_SYS_SUPPORTS_NUMA=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
@@ -98,7 +99,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -111,14 +111,19 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
+CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
@@ -207,6 +212,7 @@ CONFIG_CPU_SUBTYPE_SHX3=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=7
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
 CONFIG_29BIT=y
@@ -226,7 +232,6 @@ CONFIG_ARCH_MEMORY_PROBE=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 CONFIG_PAGE_SIZE_64KB=y
-CONFIG_ENTRY_OFFSET=0x00010000
 # CONFIG_HUGETLB_PAGE_SIZE_64K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 CONFIG_HUGETLB_PAGE_SIZE_1MB=y
@@ -249,9 +254,9 @@ CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -279,9 +284,10 @@ CONFIG_SH_X3PROTO=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=50000000
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -339,12 +345,14 @@ CONFIG_NR_CPUS=4
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_ZERO_PAGE_OFFSET=0x00010000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00010000
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=bios ignore_loglevel"
 
@@ -444,6 +452,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -462,6 +471,7 @@ CONFIG_CAN_BCM=m
 # CAN Device Drivers
 #
 CONFIG_CAN_VCAN=m
+# CONFIG_CAN_DEV is not set
 # CONFIG_CAN_DEBUG_DEVICES is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
@@ -512,6 +522,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -535,10 +546,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -555,6 +562,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -568,7 +576,6 @@ CONFIG_ATA_SFF=y
 CONFIG_PATA_PLATFORM=y
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -594,6 +601,7 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -701,7 +709,6 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -758,22 +765,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -885,6 +877,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
 # CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_IMX is not set
 CONFIG_USB_GADGET_M66592=y
@@ -894,9 +887,11 @@ CONFIG_USB_M66592=y
 # CONFIG_USB_GADGET_CI13XXX is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
 # CONFIG_USB_ETH is not set
 # CONFIG_USB_GADGETFS is not set
 # CONFIG_USB_FILE_STORAGE is not set
@@ -974,6 +969,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 CONFIG_UIO=m
@@ -981,6 +977,10 @@ CONFIG_UIO=m
 # CONFIG_UIO_PDRV_GENIRQ is not set
 # CONFIG_UIO_SMX is not set
 # CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1001,10 +1001,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1077,7 +1078,46 @@ CONFIG_NETWORK_FILESYSTEMS=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 
 #
@@ -1138,25 +1178,25 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
@@ -1168,10 +1208,8 @@ CONFIG_EARLY_PRINTK=y
 # CONFIG_DEBUG_BOOTMEM is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_IRQSTACKS is not set
 CONFIG_DUMP_CODE=y
 # CONFIG_SH_NO_BSS_INIT is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1285,3 +1323,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/snapgear_defconfig b/arch/sh/configs/snapgear_defconfig
index 54a7a3c41f3..ca3c88a8802 100644
--- a/arch/sh/configs/snapgear_defconfig
+++ b/arch/sh/configs/snapgear_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 13:14:00 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 13:11:58 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -20,6 +20,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -73,7 +74,6 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -86,8 +86,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -171,6 +176,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x01000000
 CONFIG_29BIT=y
@@ -185,7 +191,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -198,9 +203,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -219,7 +224,6 @@ CONFIG_SH_FPU=y
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_PTEA=y
 CONFIG_CPU_HAS_FPU=y
 
 #
@@ -235,9 +239,10 @@ CONFIG_SH_SECUREEDGE5410=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=60000000
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -283,12 +288,14 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
 # CONFIG_CMDLINE_BOOL is not set
 
@@ -366,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,7 +391,11 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -528,7 +540,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -581,6 +592,7 @@ CONFIG_8139TOO_PIO=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -695,22 +707,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -734,10 +731,15 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -751,12 +753,14 @@ CONFIG_EXT2_FS=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -855,27 +859,12 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -905,3 +894,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/systemh_defconfig b/arch/sh/configs/systemh_defconfig
index dbe7e546f0b..5d970263c09 100644
--- a/arch/sh/configs/systemh_defconfig
+++ b/arch/sh/configs/systemh_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 13:14:33 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 13:12:28 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -19,6 +19,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -70,7 +71,6 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -83,7 +83,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -173,6 +178,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x00400000
 CONFIG_29BIT=y
@@ -187,7 +193,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -200,9 +205,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -220,7 +225,6 @@ CONFIG_SH_FPU=y
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_PTEA=y
 CONFIG_CPU_HAS_FPU=y
 
 #
@@ -236,9 +240,10 @@ CONFIG_SH_7751_SYSTEMH=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=60000000
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -280,12 +285,14 @@ CONFIG_HZ=250
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
 # CONFIG_CMDLINE_BOOL is not set
 
@@ -428,21 +435,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -481,10 +474,15 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -496,9 +494,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -590,28 +589,12 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -640,3 +623,4 @@ CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig
index 8ca94ef7427..7ad080e820c 100644
--- a/arch/sh/configs/titan_defconfig
+++ b/arch/sh/configs/titan_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 13:14:55 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 13:12:54 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -20,6 +20,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -77,7 +78,6 @@ CONFIG_UID16=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -90,8 +90,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -181,6 +186,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x08030000
 CONFIG_MEMORY_SIZE=0x7fd0000
 CONFIG_29BIT=y
@@ -195,7 +201,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -208,9 +213,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -229,7 +234,6 @@ CONFIG_SH_FPU=y
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_PTEA=y
 CONFIG_CPU_HAS_FPU=y
 
 #
@@ -245,9 +249,10 @@ CONFIG_SH_TITAN=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=30000000
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -293,12 +298,14 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x009e0000
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf rw"
@@ -417,6 +424,7 @@ CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
 # CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
@@ -454,6 +462,7 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # CONFIG_NETFILTER_XT_MATCH_TIME is not set
 # CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
 # CONFIG_IP_VS is not set
 
 #
@@ -517,6 +526,7 @@ CONFIG_LLC=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -589,7 +599,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -731,6 +745,7 @@ CONFIG_MISC_DEVICES=y
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -754,10 +769,6 @@ CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -775,6 +786,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -783,6 +795,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
@@ -797,7 +810,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -826,7 +838,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_IFB is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -898,6 +909,7 @@ CONFIG_8139_OLD_RX_RESET=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -965,6 +977,7 @@ CONFIG_USB_RTL8150=m
 CONFIG_USB_USBNET=m
 CONFIG_USB_NET_AX8817X=m
 CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_CDC_EEM is not set
 # CONFIG_USB_NET_DM9601 is not set
 # CONFIG_USB_NET_SMSC95XX is not set
 # CONFIG_USB_NET_GL620A is not set
@@ -974,6 +987,7 @@ CONFIG_USB_NET_PLUSB=m
 # CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
 CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_NET_INT51X1 is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -1130,22 +1144,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1211,6 +1210,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
@@ -1350,7 +1350,7 @@ CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=m
+CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
 
 #
@@ -1384,9 +1384,14 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=m
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1406,7 +1411,6 @@ CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_FS_XATTR is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
@@ -1414,6 +1418,8 @@ CONFIG_XFS_FS=m
 # CONFIG_XFS_DEBUG is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1421,6 +1427,7 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
+# CONFIG_CUSE is not set
 
 #
 # Caches
@@ -1533,7 +1540,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
+CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
@@ -1626,17 +1633,15 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1645,16 +1650,15 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_DEBUG_BOOTMEM is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
-# CONFIG_IRQSTACKS is not set
 # CONFIG_DUMP_CODE is not set
 # CONFIG_SH_NO_BSS_INIT is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1787,3 +1791,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/ul2_defconfig b/arch/sh/configs/ul2_defconfig
index bfb4d980689..608fe563614 100644
--- a/arch/sh/configs/ul2_defconfig
+++ b/arch/sh/configs/ul2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 13:17:05 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 13:14:36 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -21,6 +21,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_SYS_SUPPORTS_CMT=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -78,7 +79,6 @@ CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -91,8 +91,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -187,6 +192,7 @@ CONFIG_CPU_SUBTYPE_SH7366=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x01f00000
 CONFIG_29BIT=y
@@ -205,7 +211,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
@@ -226,9 +231,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -247,7 +252,6 @@ CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_PTEA=y
 CONFIG_CPU_HAS_DSP=y
 
 #
@@ -257,10 +261,10 @@ CONFIG_CPU_HAS_DSP=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_TMU=y
 # CONFIG_SH_TIMER_CMT is not set
-CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_SH_CLK_CPG=y
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -302,12 +306,14 @@ CONFIG_KEXEC=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
+# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=dhcp"
 
@@ -390,6 +396,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -411,6 +418,8 @@ CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=m
 # CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=y
+CONFIG_MAC80211_DEFAULT_PS=y
+CONFIG_MAC80211_DEFAULT_PS_VALUE=1
 
 #
 # Rate control algorithm selection
@@ -565,10 +574,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -585,6 +590,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -598,7 +604,6 @@ CONFIG_ATA_SFF=y
 CONFIG_PATA_PLATFORM=y
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -623,6 +628,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -648,6 +654,7 @@ CONFIG_LIBERTAS_DEBUG=y
 # CONFIG_B43LEGACY is not set
 # CONFIG_ZD1211RW is not set
 # CONFIG_RT2X00 is not set
+# CONFIG_IWM is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -663,6 +670,7 @@ CONFIG_LIBERTAS_DEBUG=y
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_AX8817X=y
 CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_CDC_EEM is not set
 # CONFIG_USB_NET_DM9601 is not set
 # CONFIG_USB_NET_SMSC95XX is not set
 # CONFIG_USB_NET_GL620A is not set
@@ -672,6 +680,7 @@ CONFIG_USB_NET_CDCETHER=y
 # CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
 # CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_USB_NET_INT51X1 is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -774,22 +783,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -926,10 +920,15 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -949,10 +948,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1106,28 +1106,12 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1252,3 +1236,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/urquell_defconfig b/arch/sh/configs/urquell_defconfig
index 512664fed66..ee1987e6cc5 100644
--- a/arch/sh/configs/urquell_defconfig
+++ b/arch/sh/configs/urquell_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Mon Apr 27 14:02:55 2009
+# Linux kernel version: 2.6.30
+# Thu Jun 18 13:15:28 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -20,6 +20,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_SYS_SUPPORTS_NUMA=y
+CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -34,25 +36,30 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_TREE=y
 
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_TREE_RCU=y
 # CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
@@ -60,15 +67,29 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RT_GROUP_SCHED=y
+# CONFIG_USER_SCHED is not set
+CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+# CONFIG_PROC_PID_CPUSET is not set
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+CONFIG_MM_OWNER=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -76,8 +97,8 @@ CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -90,13 +111,20 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -129,12 +157,12 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
 
 #
 # System type
@@ -183,6 +211,7 @@ CONFIG_CPU_SUBTYPE_SH7786=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x08000000
 CONFIG_29BIT=y
@@ -201,7 +230,12 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
+# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -216,9 +250,9 @@ CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Cache configuration
@@ -247,9 +281,10 @@ CONFIG_SH_URQUELL=y
 #
 # Timer and clock configuration
 #
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_SH_CLK_CPG=y
+CONFIG_SH_CLK_CPG_LEGACY=y
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -286,25 +321,37 @@ CONFIG_HZ=250
 CONFIG_SCHED_HRTICK=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_PREEMPT_NONE is not set
+CONFIG_SECCOMP=y
+CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
-CONFIG_PREEMPT=y
+# CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
+CONFIG_SPARSE_IRQ=y
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC1, 38400 earlyprintk=serial ip=on ignore_loglevel root=/dev/nfs ip=dhcp memchunk.vpu=4m"
+CONFIG_ENTRY_OFFSET=0x00001000
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Bus options
 #
+CONFIG_PCI=y
+# CONFIG_SH_PCIDMA_NONCOHERENT is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+CONFIG_PCIEASPM=y
+CONFIG_PCIEASPM_DEBUG=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+CONFIG_PCI_DEBUG=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
@@ -312,13 +359,16 @@ CONFIG_CMDLINE="console=ttySC1, 38400 earlyprintk=serial ip=on ignore_loglevel r
 CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
+CONFIG_BINFMT_MISC=y
 
 #
 # Power management options (EXPERIMENTAL)
 #
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_HIBERNATION is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
 CONFIG_NET=y
 
 #
@@ -384,6 +434,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -391,6 +442,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
@@ -402,7 +454,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -418,6 +474,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -473,11 +531,13 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_PMC551 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -503,9 +563,13 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
@@ -537,10 +601,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -561,24 +621,90 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SIL24=y
 CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
 #
 # MII PHY device drivers
 #
-# CONFIG_MARVELL_PHY is not set
+CONFIG_MARVELL_PHY=y
 # CONFIG_DAVICOM_PHY is not set
 # CONFIG_QSEMI_PHY is not set
 # CONFIG_LXT_PHY is not set
@@ -597,11 +723,17 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
 CONFIG_SMC91X=y
 # CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
 # CONFIG_SMSC911X is not set
 # CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -609,9 +741,54 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+CONFIG_8139CP=y
+# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+CONFIG_SKY2=y
+CONFIG_SKY2_DEBUG=y
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
 
 #
 # Wireless LAN
@@ -632,8 +809,11 @@ CONFIG_SMC91X=y
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -692,6 +872,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
 CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -706,6 +887,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=6
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -714,8 +896,10 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_HW_RANDOM=y
 # CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
@@ -727,6 +911,24 @@ CONFIG_I2C_ALGOPCA=y
 #
 
 #
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 # CONFIG_I2C_GPIO is not set
@@ -742,6 +944,11 @@ CONFIG_I2C_ALGOPCA=y
 # CONFIG_I2C_TINY_USB is not set
 
 #
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
 # Other I2C/SMBus bus drivers
 #
 CONFIG_I2C_PCA_PLATFORM=y
@@ -754,7 +961,6 @@ CONFIG_I2C_PCA_PLATFORM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -763,6 +969,7 @@ CONFIG_I2C_PCA_PLATFORM=y
 # CONFIG_SPI is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
 # CONFIG_GPIO_SYSFS is not set
 
 #
@@ -779,15 +986,79 @@ CONFIG_GPIOLIB=y
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_BT8XX is not set
 
 #
 # SPI GPIO expanders:
 #
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
+CONFIG_THERMAL_HWMON=y
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -811,10 +1082,7 @@ CONFIG_MFD_SM501=y
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
+CONFIG_MEDIA_SUPPORT=y
 
 #
 # Multimedia core support
@@ -831,6 +1099,7 @@ CONFIG_MFD_SM501=y
 #
 # Graphics support
 #
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
@@ -856,7 +1125,31 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # Frame buffer hardware drivers
 #
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
 # CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 CONFIG_FB_SH_MOBILE_LCDC=m
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
@@ -909,7 +1202,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -926,14 +1219,15 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
@@ -944,6 +1238,7 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
@@ -955,12 +1250,19 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
 # CONFIG_USB_HWA_HCD is not set
 
 #
@@ -1034,14 +1336,74 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+CONFIG_RTC_DRV_GENERIC=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1055,16 +1417,25 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_FS=y
+# CONFIG_EXT4DEV_COMPAT is not set
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
 CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
+CONFIG_BTRFS_FS=y
+# CONFIG_BTRFS_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1106,9 +1477,9 @@ CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_CONFIGFS_FS=y
 CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
@@ -1121,7 +1492,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
-CONFIG_MINIX_FS=y
+# CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
@@ -1135,13 +1506,9 @@ CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
@@ -1204,46 +1571,74 @@ CONFIG_NLS_ISO8859_1=y
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINTK_TIME=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_MORE_COMPILE_OPTIONS is not set
+CONFIG_EARLY_SCIF_CONSOLE=y
+CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffeb0000
+CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_BOOTMEM is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_4KSTACKS is not set
+# CONFIG_DUMP_CODE is not set
+# CONFIG_SH_NO_BSS_INIT is not set
 
 #
 # Security options
@@ -1303,7 +1698,7 @@ CONFIG_CRYPTO_HMAC=y
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1356,13 +1751,18 @@ CONFIG_CRYPTO_DES=y
 CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
 # CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=y
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile
index d2ffc477549..08af1f45975 100644
--- a/arch/sh/drivers/pci/Makefile
+++ b/arch/sh/drivers/pci/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7751R)	+= pci-sh7751.o ops-sh4.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7763)	+= pci-sh7780.o ops-sh4.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7780)	+= pci-sh7780.o ops-sh4.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7785)	+= pci-sh7780.o ops-sh4.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7786)	+= ops-sh7786.o
 obj-$(CONFIG_CPU_SH5)			+= pci-sh5.o ops-sh5.o
 
 obj-$(CONFIG_SH_DREAMCAST)		+= ops-dreamcast.o fixups-dreamcast.o \
@@ -24,3 +25,4 @@ obj-$(CONFIG_SH_TITAN)			+= fixups-titan.o
 obj-$(CONFIG_SH_LANDISK)		+= fixups-landisk.o
 obj-$(CONFIG_SH_LBOX_RE2)		+= fixups-rts7751r2d.o
 obj-$(CONFIG_SH_CAYMAN)			+= fixups-cayman.o
+obj-$(CONFIG_SH_URQUELL)		+= pcie-sh7786.o
diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c
index e83d0d3aabe..16e0a1baad8 100644
--- a/arch/sh/drivers/pci/ops-dreamcast.c
+++ b/arch/sh/drivers/pci/ops-dreamcast.c
@@ -18,7 +18,6 @@
 #include <linux/pci.h>
 #include <linux/module.h>
 #include <linux/io.h>
-#include <linux/irq.h>
 #include <mach/pci.h>
 
 /*
diff --git a/arch/sh/drivers/pci/ops-sh7786.c b/arch/sh/drivers/pci/ops-sh7786.c
new file mode 100644
index 00000000000..48f594b9582
--- /dev/null
+++ b/arch/sh/drivers/pci/ops-sh7786.c
@@ -0,0 +1,134 @@
+/*
+ * Generic SH7786 PCI-Express operations.
+ *
+ *  Copyright (C) 2009  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License v2. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include "pcie-sh7786.h"
+
+enum {
+	PCI_ACCESS_READ,
+	PCI_ACCESS_WRITE,
+};
+
+static DEFINE_SPINLOCK(sh7786_pcie_lock);
+
+static int sh7786_pcie_config_access(unsigned char access_type,
+		struct pci_bus *bus, unsigned int devfn, int where, u32 *data)
+{
+	struct pci_channel *chan = bus->sysdata;
+	int dev, func;
+
+	dev = PCI_SLOT(devfn);
+	func = PCI_FUNC(devfn);
+
+	if (bus->number > 255 || dev > 31 || func > 7)
+		return PCIBIOS_FUNC_NOT_SUPPORTED;
+	if (devfn)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	/* Set the PIO address */
+	pci_write_reg(chan, (bus->number << 24) | (dev << 19) |
+				(func << 16) | (where & ~3), SH4A_PCIEPAR);
+
+	/* Enable the configuration access */
+	pci_write_reg(chan, (1 << 31), SH4A_PCIEPCTLR);
+
+	if (access_type == PCI_ACCESS_READ)
+		*data = pci_read_reg(chan, SH4A_PCIEPDR);
+	else
+		pci_write_reg(chan, *data, SH4A_PCIEPDR);
+
+	/* Check for master and target aborts */
+	if (pci_read_reg(chan, SH4A_PCIEPCICONF1) & ((1 << 29) | (1 << 28)))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int sh7786_pcie_read(struct pci_bus *bus, unsigned int devfn,
+			    int where, int size, u32 *val)
+{
+	unsigned long flags;
+	int ret;
+	u32 data;
+
+        if ((size == 2) && (where & 1))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	else if ((size == 4) && (where & 3))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	spin_lock_irqsave(&sh7786_pcie_lock, flags);
+	ret = sh7786_pcie_config_access(PCI_ACCESS_READ, bus,
+					devfn, where, &data);
+	if (ret != PCIBIOS_SUCCESSFUL)
+		goto out;
+
+	if (size == 1)
+		*val = (data >> ((where & 3) << 3)) & 0xff;
+	else if (size == 2)
+		*val = (data >> ((where & 2) << 3)) & 0xffff;
+	else
+		*val = data;
+
+	dev_dbg(&bus->dev, "pcie-config-read: bus=%3d devfn=0x%04x "
+		"where=0x%04x size=%d val=0x%08lx\n", bus->number,
+		devfn, where, size, (unsigned long)*val);
+
+out:
+	spin_unlock_irqrestore(&sh7786_pcie_lock, flags);
+	return ret;
+}
+
+static int sh7786_pcie_write(struct pci_bus *bus, unsigned int devfn,
+			     int where, int size, u32 val)
+{
+	unsigned long flags;
+	int shift, ret;
+	u32 data;
+
+        if ((size == 2) && (where & 1))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	else if ((size == 4) && (where & 3))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	spin_lock_irqsave(&sh7786_pcie_lock, flags);
+	ret = sh7786_pcie_config_access(PCI_ACCESS_READ, bus,
+					devfn, where, &data);
+	if (ret != PCIBIOS_SUCCESSFUL)
+		goto out;
+
+	dev_dbg(&bus->dev, "pcie-config-write: bus=%3d devfn=0x%04x "
+		"where=0x%04x size=%d val=%08lx\n", bus->number,
+		devfn, where, size, (unsigned long)val);
+
+	if (size == 1) {
+		shift = (where & 3) << 3;
+		data &= ~(0xff << shift);
+		data |= ((val & 0xff) << shift);
+	} else if (size == 2) {
+		shift = (where & 2) << 3;
+		data &= ~(0xffff << shift);
+		data |= ((val & 0xffff) << shift);
+	} else
+		data = val;
+
+	ret = sh7786_pcie_config_access(PCI_ACCESS_WRITE, bus,
+					devfn, where, &data);
+out:
+	spin_unlock_irqrestore(&sh7786_pcie_lock, flags);
+	return ret;
+}
+
+struct pci_ops sh7786_pci_ops = {
+	.read	= sh7786_pcie_read,
+	.write	= sh7786_pcie_write,
+};
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index 54d77cbb8b3..9a1c423ad16 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -53,12 +53,8 @@ static DEFINE_MUTEX(pci_scan_mutex);
 
 void __devinit register_pci_controller(struct pci_channel *hose)
 {
-	if (request_resource(&iomem_resource, hose->mem_resource) < 0)
-		goto out;
-	if (request_resource(&ioport_resource, hose->io_resource) < 0) {
-		release_resource(hose->mem_resource);
-		goto out;
-	}
+	request_resource(&iomem_resource, hose->mem_resource);
+	request_resource(&ioport_resource, hose->io_resource);
 
 	*hose_tail = hose;
 	hose_tail = &hose->next;
@@ -80,12 +76,6 @@ void __devinit register_pci_controller(struct pci_channel *hose)
 		pcibios_scanbus(hose);
 		mutex_unlock(&pci_scan_mutex);
 	}
-
-	return;
-
-out:
-	printk(KERN_WARNING
-	       "Skipping PCI bus scan due to resource conflict\n");
 }
 
 static int __init pcibios_init(void)
diff --git a/arch/sh/drivers/pci/pcie-sh7786.c b/arch/sh/drivers/pci/pcie-sh7786.c
new file mode 100644
index 00000000000..ac37ee879ba
--- /dev/null
+++ b/arch/sh/drivers/pci/pcie-sh7786.c
@@ -0,0 +1,355 @@
+/*
+ * Low-Level PCI Express Support for the SH7786
+ *
+ *  Copyright (C) 2009  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include "pcie-sh7786.h"
+#include <asm/sizes.h>
+
+struct sh7786_pcie_port {
+	struct pci_channel	*hose;
+	unsigned int		index;
+	int			endpoint;
+	int			link;
+};
+
+static struct sh7786_pcie_port *sh7786_pcie_ports;
+static unsigned int nr_ports;
+
+static struct sh7786_pcie_hwops {
+	int (*core_init)(void);
+	int (*port_init_hw)(struct sh7786_pcie_port *port);
+} *sh7786_pcie_hwops;
+
+static struct resource sh7786_pci_32bit_mem_resources[] = {
+	{
+		.name	= "pci0_mem",
+		.start	= SH4A_PCIMEM_BASEA,
+		.end	= SH4A_PCIMEM_BASEA + SZ_64M - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "pci1_mem",
+		.start	= SH4A_PCIMEM_BASEA1,
+		.end	= SH4A_PCIMEM_BASEA1 + SZ_64M - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "pci2_mem",
+		.start	= SH4A_PCIMEM_BASEA2,
+		.end	= SH4A_PCIMEM_BASEA2 + SZ_64M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct resource sh7786_pci_29bit_mem_resource = {
+	.start	= SH4A_PCIMEM_BASE,
+	.end	= SH4A_PCIMEM_BASE + SZ_64M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct resource sh7786_pci_io_resources[] = {
+	{
+		.name	= "pci0_io",
+		.start	= SH4A_PCIIO_BASE,
+		.end	= SH4A_PCIIO_BASE + SZ_8M - 1,
+		.flags	= IORESOURCE_IO,
+	}, {
+		.name	= "pci1_io",
+		.start	= SH4A_PCIIO_BASE1,
+		.end	= SH4A_PCIIO_BASE1 + SZ_8M - 1,
+		.flags	= IORESOURCE_IO,
+	}, {
+		.name	= "pci2_io",
+		.start	= SH4A_PCIIO_BASE2,
+		.end	= SH4A_PCIIO_BASE2 + SZ_4M - 1,
+		.flags	= IORESOURCE_IO,
+	},
+};
+
+extern struct pci_ops sh7786_pci_ops;
+
+#define DEFINE_CONTROLLER(start, idx)				\
+{								\
+	.pci_ops	= &sh7786_pci_ops,			\
+	.reg_base	= start,				\
+	/* mem_resource filled in at probe time */		\
+	.mem_offset	= 0,					\
+	.io_resource	= &sh7786_pci_io_resources[idx],	\
+	.io_offset	= 0,					\
+}
+
+static struct pci_channel sh7786_pci_channels[] = {
+	DEFINE_CONTROLLER(0xfe000000, 0),
+	DEFINE_CONTROLLER(0xfe200000, 1),
+	DEFINE_CONTROLLER(0xfcc00000, 2),
+};
+
+static int phy_wait_for_ack(struct pci_channel *chan)
+{
+	unsigned int timeout = 100;
+
+	while (timeout--) {
+		if (pci_read_reg(chan, SH4A_PCIEPHYADRR) & (1 << BITS_ACK))
+			return 0;
+
+		udelay(100);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int pci_wait_for_irq(struct pci_channel *chan, unsigned int mask)
+{
+	unsigned int timeout = 100;
+
+	while (timeout--) {
+		if ((pci_read_reg(chan, SH4A_PCIEINTR) & mask) == mask)
+			return 0;
+
+		udelay(100);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static void phy_write_reg(struct pci_channel *chan, unsigned int addr,
+			  unsigned int lane, unsigned int data)
+{
+	unsigned long phyaddr, ctrl;
+
+	phyaddr = (1 << BITS_CMD) + ((lane & 0xf) << BITS_LANE) +
+			((addr & 0xff) << BITS_ADR);
+
+	/* Enable clock */
+	ctrl = pci_read_reg(chan, SH4A_PCIEPHYCTLR);
+	ctrl |= (1 << BITS_CKE);
+	pci_write_reg(chan, ctrl, SH4A_PCIEPHYCTLR);
+
+	/* Set write data */
+	pci_write_reg(chan, data, SH4A_PCIEPHYDOUTR);
+	pci_write_reg(chan, phyaddr, SH4A_PCIEPHYADRR);
+
+	phy_wait_for_ack(chan);
+
+	/* Clear command */
+	pci_write_reg(chan, 0, SH4A_PCIEPHYADRR);
+
+	phy_wait_for_ack(chan);
+
+	/* Disable clock */
+	ctrl = pci_read_reg(chan, SH4A_PCIEPHYCTLR);
+	ctrl &= ~(1 << BITS_CKE);
+	pci_write_reg(chan, ctrl, SH4A_PCIEPHYCTLR);
+}
+
+static int phy_init(struct pci_channel *chan)
+{
+	unsigned int timeout = 100;
+
+	/* Initialize the phy */
+	phy_write_reg(chan, 0x60, 0xf, 0x004b008b);
+	phy_write_reg(chan, 0x61, 0xf, 0x00007b41);
+	phy_write_reg(chan, 0x64, 0xf, 0x00ff4f00);
+	phy_write_reg(chan, 0x65, 0xf, 0x09070907);
+	phy_write_reg(chan, 0x66, 0xf, 0x00000010);
+	phy_write_reg(chan, 0x74, 0xf, 0x0007001c);
+	phy_write_reg(chan, 0x79, 0xf, 0x01fc000d);
+
+	/* Deassert Standby */
+	phy_write_reg(chan, 0x67, 0xf, 0x00000400);
+
+	while (timeout--) {
+		if (pci_read_reg(chan, SH4A_PCIEPHYSR))
+			return 0;
+
+		udelay(100);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int pcie_init(struct sh7786_pcie_port *port)
+{
+	struct pci_channel *chan = port->hose;
+	unsigned int data;
+	int ret;
+
+	/* Begin initialization */
+	pci_write_reg(chan, 0, SH4A_PCIETCTLR);
+
+	/* Initialize as type1. */
+	data = pci_read_reg(chan, SH4A_PCIEPCICONF3);
+	data &= ~(0x7f << 16);
+	data |= PCI_HEADER_TYPE_BRIDGE << 16;
+	pci_write_reg(chan, data, SH4A_PCIEPCICONF3);
+
+	/* Initialize default capabilities. */
+	data = pci_read_reg(chan, SH4A_PCIEEXPCAP0);
+	data &= ~(PCI_EXP_FLAGS_TYPE << 16);
+
+	if (port->endpoint)
+		data |= PCI_EXP_TYPE_ENDPOINT << 20;
+	else
+		data |= PCI_EXP_TYPE_ROOT_PORT << 20;
+
+	data |= PCI_CAP_ID_EXP;
+	pci_write_reg(chan, data, SH4A_PCIEEXPCAP0);
+
+	/* Enable x4 link width and extended sync. */
+	data = pci_read_reg(chan, SH4A_PCIEEXPCAP4);
+	data &= ~(PCI_EXP_LNKSTA_NLW << 16);
+	data |= (1 << 22) | PCI_EXP_LNKCTL_ES;
+	pci_write_reg(chan, data, SH4A_PCIEEXPCAP4);
+
+	/* Set the completion timer timeout to the maximum 32ms. */
+	data = pci_read_reg(chan, SH4A_PCIETLCTLR);
+	data &= ~0xffff;
+	data |= 0x32 << 8;
+	pci_write_reg(chan, data, SH4A_PCIETLCTLR);
+
+	/*
+	 * Set fast training sequences to the maximum 255,
+	 * and enable MAC data scrambling.
+	 */
+	data = pci_read_reg(chan, SH4A_PCIEMACCTLR);
+	data &= ~PCIEMACCTLR_SCR_DIS;
+	data |= (0xff << 16);
+	pci_write_reg(chan, data, SH4A_PCIEMACCTLR);
+
+	/* Finish initialization */
+	data = pci_read_reg(chan, SH4A_PCIETCTLR);
+	data |= 0x1;
+	pci_write_reg(chan, data, SH4A_PCIETCTLR);
+
+	/* Enable DL_Active Interrupt generation */
+	data = pci_read_reg(chan, SH4A_PCIEDLINTENR);
+	data |= PCIEDLINTENR_DLL_ACT_ENABLE;
+	pci_write_reg(chan, data, SH4A_PCIEDLINTENR);
+
+	/* Disable MAC data scrambling. */
+	data = pci_read_reg(chan, SH4A_PCIEMACCTLR);
+	data |= PCIEMACCTLR_SCR_DIS | (0xff << 16);
+	pci_write_reg(chan, data, SH4A_PCIEMACCTLR);
+
+	ret = pci_wait_for_irq(chan, MASK_INT_TX_CTRL);
+	if (unlikely(ret != 0))
+		return -ENODEV;
+
+	pci_write_reg(chan, 0x00100007, SH4A_PCIEPCICONF1);
+	pci_write_reg(chan, 0x80888000, SH4A_PCIETXVC0DCTLR);
+	pci_write_reg(chan, 0x00222000, SH4A_PCIERXVC0DCTLR);
+	pci_write_reg(chan, 0x000050A0, SH4A_PCIEEXPCAP2);
+
+	wmb();
+
+	data = pci_read_reg(chan, SH4A_PCIEMACSR);
+	printk(KERN_NOTICE "PCI: PCIe#%d link width %d\n",
+	       port->index, (data >> 20) & 0x3f);
+
+	pci_write_reg(chan, 0x007c0000, SH4A_PCIEPAMR0);
+	pci_write_reg(chan, 0x00000000, SH4A_PCIEPARH0);
+	pci_write_reg(chan, 0x00000000, SH4A_PCIEPARL0);
+	pci_write_reg(chan, 0x80000100, SH4A_PCIEPTCTLR0);
+
+	pci_write_reg(chan, 0x03fc0000, SH4A_PCIEPAMR2);
+	pci_write_reg(chan, 0x00000000, SH4A_PCIEPARH2);
+	pci_write_reg(chan, 0x00000000, SH4A_PCIEPARL2);
+	pci_write_reg(chan, 0x80000000, SH4A_PCIEPTCTLR2);
+
+	return 0;
+}
+
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+        return 71;
+}
+
+static int sh7786_pcie_core_init(void)
+{
+	/* Return the number of ports */
+	return test_mode_pin(MODE_PIN12) ? 3 : 2;
+}
+
+static int __devinit sh7786_pcie_init_hw(struct sh7786_pcie_port *port)
+{
+	int ret;
+
+	ret = phy_init(port->hose);
+	if (unlikely(ret < 0))
+		return ret;
+
+	/*
+	 * Check if we are configured in endpoint or root complex mode,
+	 * this is a fixed pin setting that applies to all PCIe ports.
+	 */
+	port->endpoint = test_mode_pin(MODE_PIN11);
+
+	ret = pcie_init(port);
+	if (unlikely(ret < 0))
+		return ret;
+
+	register_pci_controller(port->hose);
+
+	return 0;
+}
+
+static struct sh7786_pcie_hwops sh7786_65nm_pcie_hwops __initdata = {
+	.core_init	= sh7786_pcie_core_init,
+	.port_init_hw	= sh7786_pcie_init_hw,
+};
+
+static int __init sh7786_pcie_init(void)
+{
+	int ret = 0, i;
+
+	printk(KERN_NOTICE "PCI: Starting intialization.\n");
+
+	sh7786_pcie_hwops = &sh7786_65nm_pcie_hwops;
+
+	nr_ports = sh7786_pcie_hwops->core_init();
+	BUG_ON(nr_ports > ARRAY_SIZE(sh7786_pci_channels));
+
+	if (unlikely(nr_ports == 0))
+		return -ENODEV;
+
+	sh7786_pcie_ports = kzalloc(nr_ports * sizeof(struct sh7786_pcie_port),
+				    GFP_KERNEL);
+	if (unlikely(!sh7786_pcie_ports))
+		return -ENOMEM;
+
+	printk(KERN_NOTICE "PCI: probing %d ports.\n", nr_ports);
+
+	for (i = 0; i < nr_ports; i++) {
+		struct sh7786_pcie_port *port = sh7786_pcie_ports + i;
+
+		port->index		= i;
+		port->hose		= sh7786_pci_channels + i;
+		port->hose->io_map_base	= port->hose->io_resource->start;
+
+		/*
+		 * Check if we are booting in 29 or 32-bit mode
+		 *
+		 * 32-bit mode provides each controller with its own
+		 * memory window, while 29-bit mode uses a shared one.
+		 */
+		port->hose->mem_resource = test_mode_pin(MODE_PIN10) ?
+			&sh7786_pci_32bit_mem_resources[i] :
+			&sh7786_pci_29bit_mem_resource;
+
+		ret |= sh7786_pcie_hwops->port_init_hw(port);
+	}
+
+	if (unlikely(ret))
+		return ret;
+
+	return 0;
+}
+arch_initcall(sh7786_pcie_init);
diff --git a/arch/sh/drivers/pci/pcie-sh7786.h b/arch/sh/drivers/pci/pcie-sh7786.h
new file mode 100644
index 00000000000..c655290a775
--- /dev/null
+++ b/arch/sh/drivers/pci/pcie-sh7786.h
@@ -0,0 +1,589 @@
+/*
+ * SH7786 PCI-Express controller definitions.
+ *
+ * Copyright (C) 2008, 2009 Renesas Technology Corp.
+ * All rights reserved.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __PCI_SH7786_H
+#define __PCI_SH7786_H
+
+/* PCIe bus-0(x4) on SH7786 */			// Rev1.171
+#define SH4A_PCIE_SPW_BASE	0xFE000000	/* spw config address for controller 0 */
+#define SH4A_PCIE_SPW_BASE1	0xFE200000	/* spw config address for controller 1 (Rev1.14)*/
+#define SH4A_PCIE_SPW_BASE2	0xFCC00000	/* spw config address for controller 2 (Rev1.171)*/
+#define SH4A_PCIE_SPW_BASE_LEN	0x00080000
+
+#define SH4A_PCI_CNFG_BASE	0xFE040000	/* pci config address for controller 0 */
+#define SH4A_PCI_CNFG_BASE1	0xFE240000	/* pci config address for controller 1 (Rev1.14)*/
+#define SH4A_PCI_CNFG_BASE2	0xFCC40000	/* pci config address for controller 2 (Rev1.171)*/
+#define SH4A_PCI_CNFG_BASE_LEN	0x00040000
+
+#define SH4A_PCIPIO_ADDR_OFFSET	0x000001c0	/* offset to pci config_address */
+#define SH4A_PCIPIO_DATA_OFFSET	0x00000220	/* offset to pci config_data */
+
+/*
+ * for PEX8111(Max Payload Size=128B,PCIIO_SIZE=64K),
+ * for other(Max Payload Size=4096B,PCIIO_SIZE=8M)
+ */
+
+/* PCI0-0: PCI I/O space */
+#define SH4A_PCIIO_BASE		0xFD000000	/* PCI I/O for controller 0 */
+#define SH4A_PCIIO_BASE1	0xFD800000	/* PCI I/O for controller 1 (Rev1.14)*/
+#define SH4A_PCIIO_BASE2	0xFC800000	/* PCI I/O for controller 2 (Rev1.171)*/
+
+#define SH4A_PCIIO_SIZE64	0x00010000	/* PLX allows only 64K */
+#define SH4A_PCIIO_SIZE		0x00800000	/* 8M */
+#define SH4A_PCIIO_SIZE2	0x00400000	/* 4M (Rev1.171)*/
+
+/* PCI0-1: PCI memory space 29-bit address */
+#define SH4A_PCIMEM_BASE	0x10000000
+#define SH4A_PCIMEM_SIZE	0x04000000	/* 64M */
+
+/* PCI0-2: PCI memory space 32-bit address */
+#define SH4A_PCIMEM_BASEA	0xC0000000	/*  for controller 0 */
+#define SH4A_PCIMEM_BASEA1	0xA0000000	/*  for controller 1 (Rev1.14)*/
+#define SH4A_PCIMEM_BASEA2	0x80000000	/*  for controller 2 (Rev1.171)*/
+#define SH4A_PCIMEM_SIZEA	0x20000000	/* 512M */
+
+/* PCI0: PCI memory target transfer 32-bit address translation value(Rev1.11T)*/
+#define SH4A_PCIBMSTR_TRANSLATION	0x20000000
+
+#define SH4A_PCI_DEVICE_ID		0x0002
+#define SH4A_PCI_VENDOR_ID		0x1912
+
+// PCI compatible 000-03f
+#define PCI_CMD		0x004
+#define PCI_RID		0x008
+#define PCI_IBAR	0x010
+#define PCI_MBAR0	0x014
+#define PCI_MBAR1	0x018
+
+/* PCI power management/MSI/capablity 040-0ff */
+/* PCIE extended 100-fff */
+
+/* SH7786 device identification */	// Rev1.171
+#define SH4A_PVR		(0xFF000030)
+#define SH4A_PVR_SHX3		(0x10400000)
+#define SH4A_PRR		(0xFF000044)
+#define SH4A_PRR_SH7786		(0x00000400)	// Rev1.171
+
+/*	SPVCR0		*/
+#define	SH4A_PCIEVCR0		(0x000000)	/* R - 0x0000 0000 32 */
+#define		BITS_TOP_MB	(24)
+#define		MASK_TOP_MB	(0xff<<BITS_TOP_MB)
+#define		BITS_BOT_MB	(16)
+#define		MASK_BOT_MB	(0xff<<BITS_BOT_MB)
+#define		BITS_VC_ID	(0)
+#define		MASK_VC_ID	(0xffff<<BITS_VC_ID)
+
+/*	SPVCR1		*/
+#define	SH4A_PCIEVCR1		(0x000004)	/* R - 0x0000 0000 32*/
+#define		BITS_BADOPC	(5)		/* 5 BADOPC 0 R/W */
+#define		MASK_BADOPC	(1<<BITS_BADOPC)
+#define		BITS_BADDEST	(4)		/*4 BADDEST 0 R/W  */
+#define		MASK_BADDEST	(1<<BITS_BADDEST)
+#define		BITS_UNSOLRESP	(3)		/* 3 UNSOLRESP 0 R/W  */
+#define		MASK_UNSOLRESP	(1<<BITS_UNSOLRESP)
+#define		BITS_ERRSNT	(1)		/* 1 ERRSNT 0 */
+#define		MASK_ERRSNT	(1<<BITS_ERRSNT)
+#define		BITS_ERRRCV	(0)		/* 0 ERRRCV 0 */
+#define		MASK_ERRRCV	(1<<BITS_ERRRCV)
+
+/*	PCIEECR		*/
+#define	SH4A_PCIEECR		(0x000008)	/* R/W - 0x0000 0000 32 */
+#define		BITS_ENBL	(0)	/* 0 ENBL 0 R/W */
+#define		MASK_ENBL	(1<<BITS_ENBL)
+
+/*	PCIEPAR		*/
+#define	SH4A_PCIEPAR		(0x000010)	/* R/W - 0x0000 0000 32 */
+#define		BITS_BN		(24)
+#define		MASK_BN		(0xff<<BITS_BN)
+#define		BITS_DN		(19)
+#define		MASK_DN		(0x1f<<BITS_DN)
+#define		BITS_FN		(16)
+#define		MASK_FN		(0x7<<BITS_FN)
+#define		BITS_EREGNO	(8)
+#define		MASK_EREGNO	(0xff<<BITS_EREGNO)
+#define		BITS_REGNO	(2)
+#define		MASK_REGNO	(0x3f<<BITS_REGNO)
+
+/*	PCIEPCTLR	*/
+#define	SH4A_PCIEPCTLR		(0x000018)	/* R/W - 0x0000 0000 32 */
+#define		BITS_CCIE	(31)	/*  31 CCIE */
+#define		MASK_CCIE	(1<<BITS_CCIE)
+#define		BITS_TYPE	(8)
+#define		MASK_TYPE	(1<<BITS_TYPE)
+#define		BITS_C_VC	(0)
+#define		MASK_C_VC	(1<<BITS_C_VC)
+
+/*	PCIEPDR		*/
+#define	SH4A_PCIEPDR		(0x000020)	/* R/W - 0x0000 0000 32 */
+#define		BITS_PDR	(0)
+#define		MASK_PDR	(0xffffffff<<BITS_PDR)
+
+/*	PCIEMSGALR	*/
+#define	SH4A_PCIEMSGALR		(0x000030)	/* R/W - 0x0000 0000 32 */
+#define		BITS_MSGADRL	(0)
+#define		MASK_MSGADRL	(0xffffffff<<BITS_MSGADRL)
+
+/*	PCIEMSGAHR	*/
+#define	SH4A_PCIEMSGAHR		(0x000034)	/* R/W - 0x0000 0000 32 */
+#define		BITS_MSGADRH	(0)
+#define		MASK_MSGADRH	(0xffffffff<<BITS_MSGADRH)
+
+/*	PCIEMSGCTLR	*/
+#define	SH4A_PCIEMSGCTLR	(0x000038)	/* R/W - 0x0000 0000 32 */
+#define		BITS_MSGIE	(31)
+#define		MASK_MSGIE	(1<<BITS_MSGIE)
+#define		BITS_MROUTE	(16)
+#define		MASK_MROUTE	(0x7<<BITS_MROUTE)
+#define		BITS_MCODE	(8)
+#define		MASK_MCODE	(0xff<<BITS_MCODE)
+#define		BITS_M_VC	(0)
+#define		MASK_M_VC	(1<<BITS_M_VC)
+
+/*	PCIEMSG		*/
+#define	SH4A_PCIEMSG		(0x000040)	/* W - - 32	*/
+#define		BITS_MDATA	(0)
+#define		MASK_MDATA	(0xffffffff<<BITS_MDATA)
+
+/*	PCIEPHYCTLR	*/
+#define	SH4A_PCIEPHYCTLR	(0x010000)	/* R/W - 0x0000 0000 32 */
+#define		BITS_CKE	(0)
+#define		MASK_CKE	(1<<BITS_CKE)
+
+/*	PCIERMSGIER	*/
+#define	SH4A_PCIERMSGIER	(0x004040)	/* R/W - 0x0000 0000 32 */
+
+/*	PCIEPHYADRR	*/
+#define	SH4A_PCIEPHYADRR	(0x010004)	/* R/W - 0x0000 0000 32 */
+#define		BITS_ACK	(24)			// Rev1.171
+#define		MASK_ACK	(1<<BITS_ACK)		// Rev1.171
+#define		BITS_CMD	(16)			// Rev1.171
+#define		MASK_CMD	(0x03<<BITS_CMD)	// Rev1.171
+#define		BITS_LANE	(8)
+#define		MASK_LANE	(0x0f<<BITS_LANE)
+#define		BITS_ADR	(0)
+#define		MASK_ADR	(0xff<<BITS_ADR)
+
+/*	PCIEPHYDINR	*/							// Rev1.171 start.
+#define	SH4A_PCIEPHYDINR	(0x010008)	/* R/W - 0x0000 0000 32 */
+
+/*	PCIEPHYDOUTR	*/
+#define	SH4A_PCIEPHYDOUTR	(0x01000C)	/* R/W - 0x0000 0000 32 */
+
+/*	PCIEPHYSR	*/
+#define	SH4A_PCIEPHYSR		(0x010010)	/* R/W - 0x0000 0000 32 */	// Rev1.171 end.
+
+/*	PCIEPHYDATAR	*/
+#define	SH4A_PCIEPHYDATAR	(0x00008)	/* R/W - 0xxxxx xxxx 32 */
+#define		BITS_DATA	(0)
+#define		MASK_DATA	(0xffffffff<<BITS_DATA)
+
+/*	PCIETCTLR	*/
+#define	SH4A_PCIETCTLR		(0x020000)	/* R/W R/W 0x0000 0000 32 */
+#define		BITS_CFINT	(0)
+#define		MASK_CFINT	(1<<BITS_CFINT)
+
+/*	PCIETSTR	*/
+#define	SH4A_PCIETSTR		(0x020004)	/* R/W R/W 0x0000 0000 32  */
+
+/*	PCIEINTR	*/
+#define	SH4A_PCIEINTR		(0x020008)	/* R/W R/W 0x0000 0000 32  */
+#define		BITS_INT_RX_ERP			(31)
+#define		MASK_INT_RX_ERP			(1<<BITS_INT_RX_ERP)
+#define		BITS_INT_RX_VCX_Posted		(30)
+#define		MASK_INT_RX_VCX_Posted		(1<<BITS_INT_RX_VCX_Posted)
+#define		BITS_INT_RX_VCX_NonPosted	(29)
+#define		MASK_INT_RX_VCX_NonPosted	(1<<BITS_INT_RX_VCX_NonPosted)
+#define		BITS_INT_RX_VCX_CPL		(28)
+#define		MASK_INT_RX_VCX_CPL		(1<<BITS_INT_RX_VCX_CPL)
+#define		BITS_INT_TX_VCX_Posted		(26)
+#define		MASK_INT_TX_VCX_Posted		(1<<BITS_INT_TX_VCX_Posted)
+#define		BITS_INT_TX_VCX_NonPosted	(25)
+#define		MASK_INT_TX_VCX_NonPosted	(1<<BITS_INT_TX_VCX_NonPosted)
+#define		BITS_INT_TX_VCX_CPL		(24)
+#define		MASK_INT_TX_VCX_CPL		(1<<BITS_INT_TX_VCX_CPL)
+#define		BITS_INT_RX_VC0_Posted		(22)
+#define		MASK_INT_RX_VC0_Posted		(1<<BITS_INT_RX_VC0_Posted)
+#define		BITS_INT_RX_VC0_NonPosted	(21)
+#define		MASK_INT_RX_VC0_NonPosted	(1<<BITS_INT_RX_VC0_NonPosted)
+#define		BITS_INT_RX_VC0_CPL		(20)
+#define		MASK_INT_RX_VC0_CPL		(1<<BITS_INT_RX_VC0_CPL)
+#define		BITS_INT_TX_VC0_Posted		(18)
+#define		MASK_INT_TX_VC0_Posted		(1<<BITS_INT_TX_VC0_Posted)
+#define		BITS_INT_TX_VC0_NonPosted	(17)
+#define		MASK_INT_TX_VC0_NonPosted	(1<<BITS_INT_TX_VC0_NonPosted)
+#define		BITS_INT_TX_VC0_CPL		(16)
+#define		MASK_INT_TX_VC0_CPL		(1<<BITS_INT_TX_VC0_CPL)
+#define		BITS_INT_RX_CTRL		(15)
+#define		MASK_INT_RX_CTRL		(1<<BITS_INT_RX_CTRL)
+#define		BITS_INT_TX_CTRL		(14)
+#define		MASK_INT_TX_CTRL		(1<<BITS_INT_TX_CTRL)
+#define		BITS_INTTL			(11)
+#define		MASK_INTTL			(1<<BITS_INTTL)
+#define		BITS_INTDL			(10)
+#define		MASK_INTDL			(1<<BITS_INTDL)
+#define		BITS_INTMAC			(9)
+#define		MASK_INTMAC			(1<<BITS_INTMAC)
+#define		BITS_INTPM			(8)
+#define		MASK_INTPM			(1<<BITS_INTPM)
+
+/*	PCIEINTER	*/
+#define	SH4A_PCIEINTER		(0x02000C)	/* R/W R/W 0x0000 0000 32 */
+#define		BITS_INT_RX_ERP			(31)
+#define		MASK_INT_RX_ERP			(1<<BITS_INT_RX_ERP)
+#define		BITS_INT_RX_VCX_Posted		(30)
+#define		MASK_INT_RX_VCX_Posted		(1<<BITS_INT_RX_VCX_Posted)
+#define		BITS_INT_RX_VCX_NonPosted	(29)
+#define		MASK_INT_RX_VCX_NonPosted	(1<<BITS_INT_RX_VCX_NonPosted)
+#define		BITS_INT_RX_VCX_CPL		(28)
+#define		MASK_INT_RX_VCX_CPL		(1<<BITS_INT_RX_VCX_CPL)
+#define		BITS_INT_TX_VCX_Posted		(26)
+#define		MASK_INT_TX_VCX_Posted		(1<<BITS_INT_TX_VCX_Posted)
+#define		BITS_INT_TX_VCX_NonPosted	(25)
+#define		MASK_INT_TX_VCX_NonPosted	(1<<BITS_INT_TX_VCX_NonPosted)
+#define		BITS_INT_TX_VCX_CPL		(24)
+#define		MASK_INT_TX_VCX_CPL		(1<<BITS_INT_TX_VCX_CPL)
+#define		BITS_INT_RX_VC0_Posted		(22)
+#define		MASK_INT_RX_VC0_Posted		(1<<BITS_INT_RX_VC0_Posted)
+#define		BITS_INT_RX_VC0_NonPosted	(21)
+#define		MASK_INT_RX_VC0_NonPosted	(1<<BITS_INT_RX_VC0_NonPosted)
+#define		BITS_INT_RX_VC0_CPL		(20)
+#define		MASK_INT_RX_VC0_CPL		(1<<BITS_INT_RX_VC0_CPL)
+#define		BITS_INT_TX_VC0_Posted		(18)
+#define		MASK_INT_TX_VC0_Posted		(1<<BITS_INT_TX_VC0_Posted)
+#define		BITS_INT_TX_VC0_NonPosted	(17)
+#define		MASK_INT_TX_VC0_NonPosted	(1<<BITS_INT_TX_VC0_NonPosted)
+#define		BITS_INT_TX_VC0_CPL		(16)
+#define		MASK_INT_TX_VC0_CPL		(1<<BITS_INT_TX_VC0_CPL)
+#define		BITS_INT_RX_CTRL		(15)
+#define		MASK_INT_RX_CTRL		(1<<BITS_INT_RX_CTRL)
+#define		BITS_INT_TX_CTRL		(14)
+#define		MASK_INT_TX_CTRL		(1<<BITS_INT_TX_CTRL)
+#define		BITS_INTTL			(11)
+#define		MASK_INTTL			(1<<BITS_INTTL)
+#define		BITS_INTDL			(10)
+#define		MASK_INTDL			(1<<BITS_INTDL)
+#define		BITS_INTMAC			(9)
+#define		MASK_INTMAC			(1<<BITS_INTMAC)
+#define		BITS_INTPM			(8)
+#define		MASK_INTPM			(1<<BITS_INTPM)
+
+/*	PCIEAIR	 */
+#define	SH4A_PCIEAIR		(SH4A_PCIE_BASE + 0x020010)	/* R/W R/W 0xxxxx xxxx 32 */
+
+/*	 PCIECIR	 */
+#define	SH4A_PCIECIR		(SH4A_PCIE_BASE)	/* R/W R/W 0xxxxx xxxx 32 */
+
+/*	 PCIEERRFR	 */								// Rev1.18
+#define	SH4A_PCIEERRFR		(0x020020)		/* R/W R/W 0xxxxx xxxx 32 */	// Rev1.18
+											// Rev1.18
+/*	PCIELAR0	*/
+#define	SH4A_PCIELAR0		(0x020200)	/* R/W R/W 0x0000 0000 32 */
+#define		BITS_LARn	(20)
+#define		MASK_LARn	(0xfff<<BITS_LARn)
+
+#define	SH4A_PCIE_020204	(0x020204)	/* R/W R/W 0x0000 0000 32 */
+
+/*	PCIELAMR0	*/
+#define	SH4A_PCIELAMR0		(0x020208)	/* R/W R/W 0x0000 0000 32 */
+#define		BITS_LAMRn	(20)
+#define		MASK_LAMRn	(0x1ff<<BITS_LAMRn)
+#define		BITS_LAREn	(0)
+#define		MASK_LAREn	(0x1<<BITS_LAREn)
+
+/*	PCIECSCR0	*/
+#define	SH4A_PCIECSCR0		(0x020210)	/* R/W R/W 0x0000 0000 32 */
+#define		BITS_RANGE	(2)
+#define		MASK_RANGE	(0x7<<BITS_RANGE)
+#define		BITS_SNPMD	(0)
+#define		MASK_SNPMD	(0x3<<BITS_SNPMD)
+
+/*	PCIECSAR0	*/
+#define	SH4A_PCIECSAR0		(0x020214)	/* R/W R/W 0x0000 0000 32 */
+#define		BITS_CSADR	(0)
+#define		MASK_CSADR	(0xffffffff<<BITS_CSADR)
+
+/*	PCIESTCTLR0	*/
+#define	SH4A_PCIESTCTLR0	(0x020218)	/* R/W R/W 0x0000 0000 32 */
+#define		BITS_SHPRI	(8)
+#define		MASK_SHPRI	(0x0f<<BITS_SHPRI)
+
+#define	SH4A_PCIE_020224	(0x020224)	/* R/W R/W 0x0000 0000 32 */
+
+#define	SH4A_PCIELAR1		(0x020220)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIELAMR1		(0x020228)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSCR1		(0x020230)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSAR1		(0x020234)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIESTCTLR1	(0x020238)	/* R/W R/W 0x0000 0000 32 */
+
+#define	SH4A_PCIELAR2		(0x020240)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIE_020244	(0x020244)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIELAMR2		(0x020248)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSCR2		(0x020250)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSAR2		(0x020254)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIESTCTLR2	(0x020258)	/* R/W R/W 0x0000 0000 32 */
+
+#define	SH4A_PCIELAR3		(0x020260)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIE_020264	(0x020264)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIELAMR3		(0x020268)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSCR3		(0x020270)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSAR3		(0x020274)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIESTCTLR3	(0x020278)	/* R/W R/W 0x0000 0000 32 */
+
+#define	SH4A_PCIELAR4		(0x020280)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIE_020284	(0x020284)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIELAMR4		(0x020288)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSCR4		(0x020290)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSAR4		(0x020294)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIESTCTLR4	(0x020298)	/* R/W R/W 0x0000 0000 32 */
+
+#define	SH4A_PCIELAR5		(0x0202A0)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIE_0202A4	(0x0202A4)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIELAMR5		(0x0202A8)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSCR5		(0x0202B0)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSAR5		(0x0202B4)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIESTCTLR5	(0x0202B8)	/* R/W R/W 0x0000 0000 32 */
+
+/*	PCIEPARL0	*/
+#define	SH4A_PCIEPARL0		(0x020400)	/* R/W R/W 0x0000 0000 32 */
+#define		BITS_PAL	(18)
+#define		MASK_PAL	(0x3fff<<BITS_PAL)
+
+/*	PCIEPARH0	*/
+#define	SH4A_PCIEPARH0		(0x020404)	/* R/W R/W 0x0000 0000 32 */
+#define		BITS_PAH	(0)
+#define		MASK_PAH	(0xffffffff<<BITS_PAH)
+
+/*	PCIEPAMR0	 */
+#define	SH4A_PCIEPAMR0		(0x020408)	/* R/W R/W 0x0000 0000 32 */
+#define		BITS_PAM	(18)
+#define		MASK_PAM	(0x3fff<<BITS_PAM)
+
+/*	PCIEPTCTLR0	*/
+#define	SH4A_PCIEPTCTLR0	(0x02040C)	/* R/W R/W 0x0000 0000 32 */
+#define		BITS_PARE	(31)
+#define		MASK_PARE	(0x1<<BITS_PARE)
+#define		BITS_TC		(20)
+#define		MASK_TC		(0x7<<BITS_TC)
+#define		BITS_T_VC	(16)
+#define		MASK_T_VC	(0x1<<BITS_T_VC)
+#define		BITS_LOCK	(12)
+#define		MASK_LOCK	(0x1<<BITS_LOCK)
+#define		BITS_SPC	(8)
+#define		MASK_SPC	(0x1<<BITS_SPC)
+
+#define	SH4A_PCIEPARL1		(0x020420)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPARH1		(0x020424)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPAMR1		(0x020428)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPTCTLR1	(0x02042C)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPARL2		(0x020440)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPARH2		(0x020444)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPAMR2		(0x020448)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPTCTLR2	(0x02044C)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPARL3		(0x020460)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPARH3		(0x020464)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPAMR3		(0x020468)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPTCTLR3	(0x02046C)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPARL4		(0x020480)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPARH4		(0x020484)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPAMR4		(0x020488)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPTCTLR4	(0x02048C)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPARL5		(0x0204A0)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPARH5		(0x0204A4)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPAMR5		(0x0204A8)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPTCTLR5	(0x0204AC)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMAOR		(0x021000)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSAR0		(0x021100)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSAHR0	(0x021104)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMDAR0		(0x021108)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMDAHR0	(0x02110C)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMBCNTR0	(0x021110)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSBCNTR0	(0x021114)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSTRR0	(0x021118)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCCAR0	(0x02111C)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCCR0		(0x021120)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCC2R0	(0x021124)	/* R/W R/W 0x0000 0000 - */
+#define	SH4A_PCIEDMCCCR0	(0x021128)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSAR1		(0x021140)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSAHR1	(0x021144)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMDAR1		(0x021148)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMDAHR1	(0x02114C)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMBCNTR1	(0x021150)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSBCNTR1	(0x021154)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSTRR1	(0x021158)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCCAR1	(0x02115C)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCCR1		(0x021160)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCC2R1	(0x021164)	/* R/W R/W 0x0000 0000 - */
+#define	SH4A_PCIEDMCCCR1	(0x021168)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSAR2		(0x021180)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSAHR2	(0x021184)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMDAR2		(0x021188)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMDAHR2	(0x02118C)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMBCNTR2	(0x021190)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSBCNTR2	(0x021194)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSTRR2	(0x021198)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCCAR2	(0x02119C)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCCR2		(0x0211A0)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCC2R2	(0x0211A4)	/* R/W R/W 0x0000 0000 -  */
+#define	SH4A_PCIEDMCCCR2	(0x0211A8)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSAR3		(0x0211C0)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSAHR3	(0x0211C4)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMDAR3		(0x0211C8)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMDAHR3	(0x0211CC)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMBCNTR3	(0x0211D0)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSBCNTR3	(0x0211D4)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSTRR3	(0x0211D8)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCCAR3	(0x0211DC)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCCR3		(0x0211E0)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCC2R3	(0x0211E4)	/* R/W R/W 0x0000 0000 -  */
+#define	SH4A_PCIEDMCCCR3	(0x0211E8)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPCICONF0	(0x040000)	/* R R - 8/16/32 */
+#define	SH4A_PCIEPCICONF1	(0x040004)	/* R/W R/W 0x0008 0000 8/16/32 */
+#define	SH4A_PCIEPCICONF2	(0x040008)	/* R/W R/W 0xFF00 0000 8/16/32 */
+#define	SH4A_PCIEPCICONF3	(0x04000C)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEPCICONF4	(0x040010)	/* - R/W - 8/16/32 */
+#define	SH4A_PCIEPCICONF5	(0x040014)	/* - R/W - 8/16/32 */
+#define	SH4A_PCIEPCICONF6	(0x040018)	/* - R/W - 8/16/32 */
+#define	SH4A_PCIEPCICONF7	(0x04001C)	/* - R/W - 8/16/32 */
+#define	SH4A_PCIEPCICONF8	(0x040020)	/* - R/W - 8/16/32 */
+#define	SH4A_PCIEPCICONF9	(0x040024)	/* - R/W - 8/16/32 */
+#define	SH4A_PCIEPCICONF10	(0x040028)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEPCICONF11	(0x04002C)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEPCICONF12	(0x040030)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEPCICONF13	(0x040034)	/* R/W R/W 0x0000 0040 8/16/32 */
+#define	SH4A_PCIEPCICONF14	(0x040038)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEPCICONF15	(0x04003C)	/* R/W R/W 0x0000 00FF 8/16/32 */
+#define	SH4A_PCIEPMCAP0		(0x040040)	/* R/W R 0x0003 5001 8/16/32 */
+#define	SH4A_PCIEPMCAP1		(0x040044)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEMSICAP0	(0x040050)	/* R/W R/W 0x0180 7005 8/16/32 */
+#define	SH4A_PCIEMSICAP1	(0x040054)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEMSICAP2	(0x040058)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEMSICAP3	(0x04005C)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEMSICAP4	(0x040060)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEMSICAP5	(0x040064)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEEXPCAP0	(0x040070)	/* R/W R/W 0x0001 0010 8/16/32 */
+#define	SH4A_PCIEEXPCAP1	(0x040074)	/* R/W R 0x0000 0005 8/16/32 */
+#define	SH4A_PCIEEXPCAP2	(0x040078)	/* R/W R/W 0x0000 0801 8/16/32 */
+#define	SH4A_PCIEEXPCAP3	(0x04007C)	/* R/W R 0x0003 F421 8/16/32 */
+#define	SH4A_PCIEEXPCAP4	(0x040080)	/* R/W R/W 0x0041 0000 8/16/32 */
+#define	SH4A_PCIEEXPCAP5	(0x040084)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEEXPCAP6	(0x040088)	/* R/W R/W 0x0000 03C0 8/16/32 */
+#define	SH4A_PCIEEXPCAP7	(0x04008C)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEEXPCAP8	(0x040090)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEVCCAP0		(0x040100)	/* R/W R 0x1B01 0002 8/16/32 */
+#define	SH4A_PCIEVCCAP1		(0x040104)	/* R R 0x0000 0001 8/16/32 */
+#define	SH4A_PCIEVCCAP2		(0x040108)	/* R R 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEVCCAP3		(0x04010C)	/* R R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEVCCAP4		(0x040110)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEVCCAP5		(0x040114)	/* R/W R/W 0x8000 00FF 8/16/32 */
+#define	SH4A_PCIEVCCAP6		(0x040118)	/* R/W R 0x0002 0000 8/16/32 */
+#define	SH4A_PCIEVCCAP7		(0x04011C)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEVCCAP8		(0x040120)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEVCCAP9		(0x040124)	/* R/W R 0x0002 0000 8/16/32 */
+#define	SH4A_PCIENUMCAP0	(0x0001B0)	/* RW R 0x0001 0003 8/16/32 */
+#define	SH4A_PCIENUMCAP1	(0x0001B4)	/* R R 0x0000 0000 8/16/32 */
+#define	SH4A_PCIENUMCAP2	(0x0001B8)	/* R R 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEIDSETR0	(0x041000)	/* R/W R 0x0000 FFFF 16/32 */
+#define	SH4A_PCIEIDSETR1	(0x041004)	/* R/W R 0xFF00 0000 16/32 */
+#define	SH4A_PCIEBAR0SETR	(0x041008)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEBAR1SETR	(0x04100C)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEBAR2SETR	(0x041010)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEBAR3SETR	(0x041014)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEBAR4SETR	(0x041018)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEBAR5SETR	(0x04101C)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIECISSETR	(0x041020)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEIDSETR2	(0x041024)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEEROMSETR	(0x041028)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEDSERSETR0	(0x04102C)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEDSERSETR1	(0x041030)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIECTLR		(0x041040)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIETLSR		(0x041044)	/* R/W1C R 0x0000 0000 16/32 */
+#define	SH4A_PCIETLCTLR		(0x041048)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEDLSR		(0x04104C)	/* R/W1C R 0x4003 0000 16/32 */
+#define	SH4A_PCIEDLCTLR		(0x041050)	/* R R 0x0000 0000 16/32 */
+#define	SH4A_PCIEMACSR		(0x041054)	/* R/W1C R 0x0041 0000 16/32 */
+#define	SH4A_PCIEMACCTLR	(0x041058)	/* R/W R 0x0000 0000 16/32 */
+#define		PCIEMACCTLR_SCR_DIS	(1 << 27)	/* scramble disable */
+#define	SH4A_PCIEPMSTR		(0x04105C)	/* R/W1C R 0x0000 0000 16/32 */
+#define	SH4A_PCIEPMCTLR		(0x041060)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIETLINTENR	(0x041064)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEDLINTENR	(0x041068)	/* R/W R 0x0000 0000 16/32 */
+#define		PCIEDLINTENR_DLL_ACT_ENABLE	(1 << 31) /* DL active irq */
+#define	SH4A_PCIEMACINTENR	(0x04106C)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEPMINTENR	(0x041070)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIETXDCTLR	(0x044000)	/* R/W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIETXCTLR		(0x044020)	/* R/W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIETXSR		(0x044028)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIETXVC0DCTLR	(0x044100)	/* R/W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIETXVC0SR	(0x044108)	/* R/W - H'00888000_00000000 32/64 */
+#define	SH4A_PCIEVC0PDTXR	(0x044110)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0PHTXR	(0x044118)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0NPDTXR	(0x044120)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0NPHTXR	(0x044128)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0CDTXR	(0x044130)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0CHTXR	(0x044138)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIETXVCXDCTLR	(0x044200)	/* R/W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIETXVCXSR	(0x044208)	/* R/W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXPDTXR	(0x044210)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXPHTXR	(0x044218)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXNPDTXR	(0x044220)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXNPHTXR	(0x044228)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXCDTXR	(0x044230)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXCHTXR	(0x044238)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIERDCTLR		(0x046000)	/* RW - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEERPCTLR	(0x046008)	/* RW - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEERPHR		(0x046010)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEERPERR		(0x046018)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIERXVC0DCTLR	(0x046100)	/* RW - H'00000000_00000000 32/64 */
+#define	SH4A_PCIERXVC0SR	(0x046108)	/* RW - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0PDRXR	(0x046140)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0PHRXR	(0x046148)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0PERR	(0x046150)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0NPDRXR	(0x046158)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0NPHRXR	(0x046160)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0NPERR	(0x046168)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0CDRXR	(0x046170)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0CHRXR	(0x046178)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0CERR	(0x046180)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIERXVCXDCTLR	(0x046200)	/* RW - H'00000000_00000000 32/64 */
+#define	SH4A_PCIERXVCXSR	(0x046208)	/* RW - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXPDRXR	(0x046240)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXPHRXR	(0x046248)	/* R H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXPERR	(0x046250)	/* R H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXNPDRXR	(0x046258)	/* R H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXNPHRXR	(0x046260)	/* R H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXNPERR	(0x046268)	/* R H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXCDRXR	(0x046270)	/* R H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXCHRXR	(0x046278)	/* R H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXCERR	(0x046280)	/* R H'00000000_00000000 32/64 */
+
+/* SSI Register Definition for MSI WORK AROUND --hamada */
+#define SH4A_PCI_SSI_BASE	0xFFE00000	/* spw config address	*/
+#define SH4A_PCI_SSI_BASE_LEN	0x00100000	/* 1MB			*/
+
+#define	SH4A_SSICR0		(0x000000)
+#define	SH4A_SSICR1		(0x010000)
+#define	SH4A_SSICR2		(0x020000)
+#define	SH4A_SSICR3		(0x030000)
+
+#define PCI_REG(x)		((x) + 0x40000)
+
+static inline void
+pci_write_reg(struct pci_channel *chan, unsigned long val, unsigned long reg)
+{
+	__raw_writel(val, chan->reg_base + reg);
+}
+
+static inline unsigned long
+pci_read_reg(struct pci_channel *chan, unsigned long reg)
+{
+	return __raw_readl(chan->reg_base + reg);
+}
+
+#endif /* __PCI_SH7786_H */
diff --git a/arch/sh/include/asm/atomic-irq.h b/arch/sh/include/asm/atomic-irq.h
index a0b348068ca..467d9415a32 100644
--- a/arch/sh/include/asm/atomic-irq.h
+++ b/arch/sh/include/asm/atomic-irq.h
@@ -10,29 +10,29 @@ static inline void atomic_add(int i, atomic_t *v)
 {
 	unsigned long flags;
 
-	local_irq_save(flags);
+	raw_local_irq_save(flags);
 	v->counter += i;
-	local_irq_restore(flags);
+	raw_local_irq_restore(flags);
 }
 
 static inline void atomic_sub(int i, atomic_t *v)
 {
 	unsigned long flags;
 
-	local_irq_save(flags);
+	raw_local_irq_save(flags);
 	v->counter -= i;
-	local_irq_restore(flags);
+	raw_local_irq_restore(flags);
 }
 
 static inline int atomic_add_return(int i, atomic_t *v)
 {
 	unsigned long temp, flags;
 
-	local_irq_save(flags);
+	raw_local_irq_save(flags);
 	temp = v->counter;
 	temp += i;
 	v->counter = temp;
-	local_irq_restore(flags);
+	raw_local_irq_restore(flags);
 
 	return temp;
 }
@@ -41,11 +41,11 @@ static inline int atomic_sub_return(int i, atomic_t *v)
 {
 	unsigned long temp, flags;
 
-	local_irq_save(flags);
+	raw_local_irq_save(flags);
 	temp = v->counter;
 	temp -= i;
 	v->counter = temp;
-	local_irq_restore(flags);
+	raw_local_irq_restore(flags);
 
 	return temp;
 }
@@ -54,18 +54,18 @@ static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
 {
 	unsigned long flags;
 
-	local_irq_save(flags);
+	raw_local_irq_save(flags);
 	v->counter &= ~mask;
-	local_irq_restore(flags);
+	raw_local_irq_restore(flags);
 }
 
 static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
 {
 	unsigned long flags;
 
-	local_irq_save(flags);
+	raw_local_irq_save(flags);
 	v->counter |= mask;
-	local_irq_restore(flags);
+	raw_local_irq_restore(flags);
 }
 
 #endif /* __ASM_SH_ATOMIC_IRQ_H */
diff --git a/arch/sh/include/asm/atomic.h b/arch/sh/include/asm/atomic.h
index 157c320272c..e8e78137c6f 100644
--- a/arch/sh/include/asm/atomic.h
+++ b/arch/sh/include/asm/atomic.h
@@ -85,4 +85,6 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 #define smp_mb__after_atomic_inc()	barrier()
 
 #include <asm-generic/atomic-long.h>
+#include <asm-generic/atomic64.h>
+
 #endif /* __ASM_SH_ATOMIC_H */
diff --git a/arch/sh/include/asm/checksum.h b/arch/sh/include/asm/checksum.h
index 67496ab0ef0..fc26d1f4b59 100644
--- a/arch/sh/include/asm/checksum.h
+++ b/arch/sh/include/asm/checksum.h
@@ -1,5 +1,5 @@
 #ifdef CONFIG_SUPERH32
 # include "checksum_32.h"
 #else
-# include "checksum_64.h"
+# include <asm-generic/checksum.h>
 #endif
diff --git a/arch/sh/include/asm/checksum_64.h b/arch/sh/include/asm/checksum_64.h
deleted file mode 100644
index 9c62a031a8f..00000000000
--- a/arch/sh/include/asm/checksum_64.h
+++ /dev/null
@@ -1,78 +0,0 @@
-#ifndef __ASM_SH_CHECKSUM_64_H
-#define __ASM_SH_CHECKSUM_64_H
-
-/*
- * include/asm-sh/checksum_64.h
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- *	Note: when you get a NULL pointer exception here this means someone
- *	passed in an incorrect kernel address to one of these functions.
- *
- *	If you use these functions directly please don't forget the
- *	access_ok().
- */
-
-
-__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len,
-				       __wsum sum);
-
-__wsum csum_partial_copy_from_user(const void __user *src, void *dst,
-					 int len, __wsum sum, int *err_ptr);
-
-static inline __sum16 csum_fold(__wsum csum)
-{
-	u32 sum = (__force u32)csum;
-        sum = (sum & 0xffff) + (sum >> 16);
-        sum = (sum & 0xffff) + (sum >> 16);
-        return (__force __sum16)~sum;
-}
-
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-__wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-				 unsigned short len, unsigned short proto,
-				 __wsum sum);
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-						   unsigned short len,
-						   unsigned short proto,
-						   __wsum sum)
-{
-	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-static inline __sum16 ip_compute_csum(const void *buff, int len)
-{
-	return csum_fold(csum_partial(buff, len, 0));
-}
-
-#endif /* __ASM_SH_CHECKSUM_64_H */
diff --git a/arch/sh/include/asm/current.h b/arch/sh/include/asm/current.h
index 62b63880b33..4c51401b553 100644
--- a/arch/sh/include/asm/current.h
+++ b/arch/sh/include/asm/current.h
@@ -1,20 +1 @@
-#ifndef __ASM_SH_CURRENT_H
-#define __ASM_SH_CURRENT_H
-
-/*
- * Copyright (C) 1999 Niibe Yutaka
- *
- */
-
-#include <linux/thread_info.h>
-
-struct task_struct;
-
-static __inline__ struct task_struct * get_current(void)
-{
-	return current_thread_info()->task;
-}
-
-#define current get_current()
-
-#endif /* __ASM_SH_CURRENT_H */
+#include <asm-generic/current.h>
diff --git a/arch/sh/include/asm/dma-mapping.h b/arch/sh/include/asm/dma-mapping.h
index ea9d4f41c9d..69d56dd4c96 100644
--- a/arch/sh/include/asm/dma-mapping.h
+++ b/arch/sh/include/asm/dma-mapping.h
@@ -97,7 +97,7 @@ static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
 	dma_unmap_single(dev, dma_address, size, dir);
 }
 
-static inline void dma_sync_single(struct device *dev, dma_addr_t dma_handle,
+static inline void __dma_sync_single(struct device *dev, dma_addr_t dma_handle,
 				   size_t size, enum dma_data_direction dir)
 {
 #if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
@@ -119,7 +119,7 @@ static inline void dma_sync_single_range(struct device *dev,
 	dma_cache_sync(dev, phys_to_virt(dma_handle) + offset, size, dir);
 }
 
-static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg,
+static inline void __dma_sync_sg(struct device *dev, struct scatterlist *sg,
 			       int nelems, enum dma_data_direction dir)
 {
 	int i;
@@ -137,7 +137,7 @@ static inline void dma_sync_single_for_cpu(struct device *dev,
 					   dma_addr_t dma_handle, size_t size,
 					   enum dma_data_direction dir)
 {
-	dma_sync_single(dev, dma_handle, size, dir);
+	__dma_sync_single(dev, dma_handle, size, dir);
 	debug_dma_sync_single_for_cpu(dev, dma_handle, size, dir);
 }
 
@@ -146,7 +146,7 @@ static inline void dma_sync_single_for_device(struct device *dev,
 					      size_t size,
 					      enum dma_data_direction dir)
 {
-	dma_sync_single(dev, dma_handle, size, dir);
+	__dma_sync_single(dev, dma_handle, size, dir);
 	debug_dma_sync_single_for_device(dev, dma_handle, size, dir);
 }
 
@@ -177,7 +177,7 @@ static inline void dma_sync_sg_for_cpu(struct device *dev,
 				       struct scatterlist *sg, int nelems,
 				       enum dma_data_direction dir)
 {
-	dma_sync_sg(dev, sg, nelems, dir);
+	__dma_sync_sg(dev, sg, nelems, dir);
 	debug_dma_sync_sg_for_cpu(dev, sg, nelems, dir);
 }
 
@@ -185,7 +185,7 @@ static inline void dma_sync_sg_for_device(struct device *dev,
 					  struct scatterlist *sg, int nelems,
 					  enum dma_data_direction dir)
 {
-	dma_sync_sg(dev, sg, nelems, dir);
+	__dma_sync_sg(dev, sg, nelems, dir);
 	debug_dma_sync_sg_for_device(dev, sg, nelems, dir);
 }
 
diff --git a/arch/sh/include/asm/dma.h b/arch/sh/include/asm/dma.h
index 6bd17847387..04ad0e1e637 100644
--- a/arch/sh/include/asm/dma.h
+++ b/arch/sh/include/asm/dma.h
@@ -16,13 +16,7 @@
 #include <linux/sched.h>
 #include <linux/sysdev.h>
 #include <cpu/dma.h>
-
-/* The maximum address that we can perform a DMA transfer to on this platform */
-/* Don't define MAX_DMA_ADDRESS; it's useless on the SuperH and any
-   occurrence should be flagged as an error.  */
-/* But... */
-/* XXX: This is not applicable to SuperH, just needed for alloc_bootmem */
-#define MAX_DMA_ADDRESS		(PAGE_OFFSET+0x10000000)
+#include <asm-generic/dma.h>
 
 #ifdef CONFIG_NR_DMA_CHANNELS
 #  define MAX_DMA_CHANNELS   (CONFIG_NR_DMA_CHANNELS)
@@ -137,8 +131,6 @@ extern int dma_xfer(unsigned int chan, unsigned long from,
 
 extern int request_dma_bycap(const char **dmac, const char **caps,
 			     const char *dev_id);
-extern int request_dma(unsigned int chan, const char *dev_id);
-extern void free_dma(unsigned int chan);
 extern int get_dma_residue(unsigned int chan);
 extern struct dma_info *get_dma_info(unsigned int chan);
 extern struct dma_channel *get_dma_channel(unsigned int chan);
diff --git a/arch/sh/include/asm/ipcbuf.h b/arch/sh/include/asm/ipcbuf.h
index 5ffc9972a7e..84c7e51cb6d 100644
--- a/arch/sh/include/asm/ipcbuf.h
+++ b/arch/sh/include/asm/ipcbuf.h
@@ -1,29 +1 @@
-#ifndef __ASM_SH_IPCBUF_H__
-#define __ASM_SH_IPCBUF_H__
-
-/*
- * The ipc64_perm structure for i386 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm
-{
-	__kernel_key_t		key;
-	__kernel_uid32_t	uid;
-	__kernel_gid32_t	gid;
-	__kernel_uid32_t	cuid;
-	__kernel_gid32_t	cgid;
-	__kernel_mode_t		mode;
-	unsigned short		__pad1;
-	unsigned short		seq;
-	unsigned short		__pad2;
-	unsigned long		__unused1;
-	unsigned long		__unused2;
-};
-
-#endif /* __ASM_SH_IPCBUF_H__ */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/sh/include/asm/irq.h b/arch/sh/include/asm/irq.h
index a2b8c99cc06..df8e1500527 100644
--- a/arch/sh/include/asm/irq.h
+++ b/arch/sh/include/asm/irq.h
@@ -39,7 +39,6 @@ static inline int generic_irq_demux(int irq)
 	return irq;
 }
 
-#define irq_canonicalize(irq)	(irq)
 #define irq_demux(irq)		sh_mv.mv_irq_demux(irq)
 
 void init_IRQ(void);
@@ -54,6 +53,7 @@ extern void irq_ctx_exit(int cpu);
 # define irq_ctx_exit(cpu) do { } while (0)
 #endif
 
+#include <asm-generic/irq.h>
 #ifdef CONFIG_CPU_SH5
 #include <cpu/irq.h>
 #endif
diff --git a/arch/sh/include/asm/mman.h b/arch/sh/include/asm/mman.h
index 7d8b72c91a5..8eebf89f5ab 100644
--- a/arch/sh/include/asm/mman.h
+++ b/arch/sh/include/asm/mman.h
@@ -1,17 +1 @@
-#ifndef __ASM_SH_MMAN_H
-#define __ASM_SH_MMAN_H
-
-#include <asm-generic/mman-common.h>
-
-#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
-#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
-#define MAP_LOCKED	0x2000		/* pages are locked */
-#define MAP_NORESERVE	0x4000		/* don't check for reservations */
-#define MAP_POPULATE	0x8000		/* populate (prefault) page tables */
-#define MAP_NONBLOCK	0x10000		/* do not block on IO */
-
-#define MCL_CURRENT	1		/* lock all current mappings */
-#define MCL_FUTURE	2		/* lock all future mappings */
-
-#endif /* __ASM_SH_MMAN_H */
+#include <asm-generic/mman.h>
diff --git a/arch/sh/include/asm/mmu_context.h b/arch/sh/include/asm/mmu_context.h
index 2a9c55f1a83..67d8946db19 100644
--- a/arch/sh/include/asm/mmu_context.h
+++ b/arch/sh/include/asm/mmu_context.h
@@ -122,30 +122,30 @@ static inline void switch_mm(struct mm_struct *prev,
 	unsigned int cpu = smp_processor_id();
 
 	if (likely(prev != next)) {
-		cpu_set(cpu, next->cpu_vm_mask);
+		cpumask_set_cpu(cpu, mm_cpumask(next));
 		set_TTB(next->pgd);
 		activate_context(next, cpu);
 	} else
-		if (!cpu_test_and_set(cpu, next->cpu_vm_mask))
+		if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)))
 			activate_context(next, cpu);
 }
+
+#define activate_mm(prev, next)		switch_mm((prev),(next),NULL)
+#define deactivate_mm(tsk,mm)		do { } while (0)
+#define enter_lazy_tlb(mm,tsk)		do { } while (0)
+
 #else
-#define get_mmu_context(mm)		do { } while (0)
-#define init_new_context(tsk,mm)	(0)
-#define destroy_context(mm)		do { } while (0)
+
 #define set_asid(asid)			do { } while (0)
 #define get_asid()			(0)
 #define cpu_asid(cpu, mm)		({ (void)cpu; NO_CONTEXT; })
 #define switch_and_save_asid(asid)	(0)
 #define set_TTB(pgd)			do { } while (0)
 #define get_TTB()			(0)
-#define activate_context(mm,cpu)	do { } while (0)
-#define switch_mm(prev,next,tsk)	do { } while (0)
-#endif /* CONFIG_MMU */
 
-#define activate_mm(prev, next)		switch_mm((prev),(next),NULL)
-#define deactivate_mm(tsk,mm)		do { } while (0)
-#define enter_lazy_tlb(mm,tsk)		do { } while (0)
+#include <asm-generic/mmu_context.h>
+
+#endif /* CONFIG_MMU */
 
 #if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4)
 /*
diff --git a/arch/sh/include/asm/module.h b/arch/sh/include/asm/module.h
index 46eccd33166..068bf165975 100644
--- a/arch/sh/include/asm/module.h
+++ b/arch/sh/include/asm/module.h
@@ -1,17 +1,7 @@
 #ifndef _ASM_SH_MODULE_H
 #define _ASM_SH_MODULE_H
 
-/*
- * This file contains the SH architecture specific module code.
- */
-
-struct mod_arch_specific {
-	/* Nothing to see here .. */
-};
-
-#define Elf_Shdr		Elf32_Shdr
-#define Elf_Sym			Elf32_Sym
-#define Elf_Ehdr		Elf32_Ehdr
+#include <asm-generic/module.h>
 
 #ifdef CONFIG_CPU_LITTLE_ENDIAN
 # ifdef CONFIG_CPU_SH2
diff --git a/arch/sh/include/asm/msgbuf.h b/arch/sh/include/asm/msgbuf.h
index 517432343fb..809134c644a 100644
--- a/arch/sh/include/asm/msgbuf.h
+++ b/arch/sh/include/asm/msgbuf.h
@@ -1,31 +1 @@
-#ifndef __ASM_SH_MSGBUF_H
-#define __ASM_SH_MSGBUF_H
-
-/* 
- * The msqid64_ds structure for i386 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
-	struct ipc64_perm msg_perm;
-	__kernel_time_t msg_stime;	/* last msgsnd time */
-	unsigned long	__unused1;
-	__kernel_time_t msg_rtime;	/* last msgrcv time */
-	unsigned long	__unused2;
-	__kernel_time_t msg_ctime;	/* last change time */
-	unsigned long	__unused3;
-	unsigned long  msg_cbytes;	/* current number of bytes on queue */
-	unsigned long  msg_qnum;	/* number of messages in queue */
-	unsigned long  msg_qbytes;	/* max number of bytes on queue */
-	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
-	__kernel_pid_t msg_lrpid;	/* last receive pid */
-	unsigned long  __unused4;
-	unsigned long  __unused5;
-};
-
-#endif /* __ASM_SH_MSGBUF_H */
+#include <asm-generic/msgbuf.h>
diff --git a/arch/sh/include/asm/param.h b/arch/sh/include/asm/param.h
index ae245afdfd6..965d4542797 100644
--- a/arch/sh/include/asm/param.h
+++ b/arch/sh/include/asm/param.h
@@ -1,22 +1 @@
-#ifndef __ASM_SH_PARAM_H
-#define __ASM_SH_PARAM_H
-
-#ifdef __KERNEL__
-# define HZ		CONFIG_HZ
-# define USER_HZ	100		/* User interfaces are in "ticks" */
-# define CLOCKS_PER_SEC	(USER_HZ)	/* frequency at which times() counts */
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE	4096
-
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
-
-#endif /* __ASM_SH_PARAM_H */
+#include <asm-generic/param.h>
diff --git a/arch/sh/include/asm/parport.h b/arch/sh/include/asm/parport.h
index f67ba60a2ac..cf252af6459 100644
--- a/arch/sh/include/asm/parport.h
+++ b/arch/sh/include/asm/parport.h
@@ -1,16 +1 @@
-/*
- * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
- *
- * This file should only be included by drivers/parport/parport_pc.c.
- */
-#ifndef __ASM_SH_PARPORT_H
-#define __ASM_SH_PARPORT_H
-
-static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma);
-
-static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma)
-{
-	return parport_pc_find_isa_ports(autoirq, autodma);
-}
-
-#endif /* __ASM_SH_PARPORT_H */
+#include <asm-generic/parport.h>
diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h
index ae0da6f48b6..d3633f513eb 100644
--- a/arch/sh/include/asm/pci.h
+++ b/arch/sh/include/asm/pci.h
@@ -137,19 +137,6 @@ extern void pcibios_resource_to_bus(struct pci_dev *dev,
 extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
 				    struct pci_bus_region *region);
 
-static inline struct resource *
-pcibios_select_root(struct pci_dev *pdev, struct resource *res)
-{
-	struct resource *root = NULL;
-
-	if (res->flags & IORESOURCE_IO)
-		root = &ioport_resource;
-	if (res->flags & IORESOURCE_MEM)
-		root = &iomem_resource;
-
-	return root;
-}
-
 /* Chances are this interrupt is wired PC-style ...  */
 static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 {
diff --git a/arch/sh/include/asm/perf_counter.h b/arch/sh/include/asm/perf_counter.h
new file mode 100644
index 00000000000..a8153c2aa6f
--- /dev/null
+++ b/arch/sh/include/asm/perf_counter.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_SH_PERF_COUNTER_H
+#define __ASM_SH_PERF_COUNTER_H
+
+/* SH only supports software counters through this interface. */
+#define set_perf_counter_pending()	do { } while (0)
+
+#endif /* __ASM_SH_PERF_COUNTER_H */
diff --git a/arch/sh/include/asm/posix_types_32.h b/arch/sh/include/asm/posix_types_32.h
index 2172732c55c..6a9ceaaf1ae 100644
--- a/arch/sh/include/asm/posix_types_32.h
+++ b/arch/sh/include/asm/posix_types_32.h
@@ -1,118 +1,29 @@
-#ifndef __ASM_SH_POSIX_TYPES_H
-#define __ASM_SH_POSIX_TYPES_H
+#ifndef __ASM_SH_POSIX_TYPES_32_H
+#define __ASM_SH_POSIX_TYPES_32_H
 
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc.  Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned long	__kernel_ino_t;
 typedef unsigned short	__kernel_mode_t;
+#define __kernel_mode_t __kernel_mode_t
 typedef unsigned short	__kernel_nlink_t;
-typedef long		__kernel_off_t;
-typedef int		__kernel_pid_t;
+#define __kernel_nlink_t __kernel_nlink_t
 typedef unsigned short	__kernel_ipc_pid_t;
+#define __kernel_ipc_pid_t __kernel_ipc_pid_t
 typedef unsigned short	__kernel_uid_t;
+#define __kernel_uid_t __kernel_uid_t
 typedef unsigned short	__kernel_gid_t;
-typedef unsigned int	__kernel_size_t;
-typedef int		__kernel_ssize_t;
-typedef int		__kernel_ptrdiff_t;
-typedef long		__kernel_time_t;
-typedef long		__kernel_suseconds_t;
-typedef long		__kernel_clock_t;
-typedef int		__kernel_timer_t;
-typedef int		__kernel_clockid_t;
-typedef int		__kernel_daddr_t;
-typedef char *		__kernel_caddr_t;
-typedef unsigned short	__kernel_uid16_t;
-typedef unsigned short	__kernel_gid16_t;
+#define __kernel_gid_t __kernel_gid_t
+
 typedef unsigned int	__kernel_uid32_t;
+#define __kernel_uid32_t __kernel_uid32_t
 typedef unsigned int	__kernel_gid32_t;
+#define __kernel_gid32_t __kernel_gid32_t
 
 typedef unsigned short	__kernel_old_uid_t;
+#define __kernel_old_uid_t __kernel_old_uid_t
 typedef unsigned short	__kernel_old_gid_t;
+#define __kernel_old_gid_t __kernel_old_gid_t
 typedef unsigned short	__kernel_old_dev_t;
+#define __kernel_old_dev_t __kernel_old_dev_t
 
-#ifdef __GNUC__
-typedef long long	__kernel_loff_t;
-#endif
-
-typedef struct {
-	int	val[2];
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__)
-
-#undef	__FD_SET
-static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
-{
-	unsigned long __tmp = __fd / __NFDBITS;
-	unsigned long __rem = __fd % __NFDBITS;
-	__fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
-}
-
-#undef	__FD_CLR
-static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
-{
-	unsigned long __tmp = __fd / __NFDBITS;
-	unsigned long __rem = __fd % __NFDBITS;
-	__fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
-}
-
-
-#undef	__FD_ISSET
-static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
-{ 
-	unsigned long __tmp = __fd / __NFDBITS;
-	unsigned long __rem = __fd % __NFDBITS;
-	return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
-}
-
-/*
- * This will unroll the loop for the normal constant case (8 ints,
- * for a 256-bit fd_set)
- */
-#undef	__FD_ZERO
-static __inline__ void __FD_ZERO(__kernel_fd_set *__p)
-{
-	unsigned long *__tmp = __p->fds_bits;
-	int __i;
-
-	if (__builtin_constant_p(__FDSET_LONGS)) {
-		switch (__FDSET_LONGS) {
-		case 16:
-			__tmp[ 0] = 0; __tmp[ 1] = 0;
-			__tmp[ 2] = 0; __tmp[ 3] = 0;
-			__tmp[ 4] = 0; __tmp[ 5] = 0;
-			__tmp[ 6] = 0; __tmp[ 7] = 0;
-			__tmp[ 8] = 0; __tmp[ 9] = 0;
-			__tmp[10] = 0; __tmp[11] = 0;
-			__tmp[12] = 0; __tmp[13] = 0;
-			__tmp[14] = 0; __tmp[15] = 0;
-			return;
-
-		case 8:
-			__tmp[ 0] = 0; __tmp[ 1] = 0;
-			__tmp[ 2] = 0; __tmp[ 3] = 0;
-			__tmp[ 4] = 0; __tmp[ 5] = 0;
-			__tmp[ 6] = 0; __tmp[ 7] = 0;
-			return;
-
-		case 4:
-			__tmp[ 0] = 0; __tmp[ 1] = 0;
-			__tmp[ 2] = 0; __tmp[ 3] = 0;
-			return;
-		}
-	}
-	__i = __FDSET_LONGS;
-	while (__i) {
-		__i--;
-		*__tmp = 0;
-		__tmp++;
-	}
-}
-
-#endif /* defined(__KERNEL__) */
+#include <asm-generic/posix_types.h>
 
-#endif /* __ASM_SH_POSIX_TYPES_H */
+#endif /* __ASM_SH_POSIX_TYPES_32_H */
diff --git a/arch/sh/include/asm/posix_types_64.h b/arch/sh/include/asm/posix_types_64.h
index f83e9bd463d..8cd11485c06 100644
--- a/arch/sh/include/asm/posix_types_64.h
+++ b/arch/sh/include/asm/posix_types_64.h
@@ -1,127 +1,34 @@
-#ifndef __ASM_SH64_POSIX_TYPES_H
-#define __ASM_SH64_POSIX_TYPES_H
+#ifndef __ASM_SH_POSIX_TYPES_64_H
+#define __ASM_SH_POSIX_TYPES_64_H
 
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * include/asm-sh64/posix_types.h
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003  Paul Mundt
- *
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc.  Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned long	__kernel_ino_t;
 typedef unsigned short	__kernel_mode_t;
+#define __kernel_mode_t __kernel_mode_t
 typedef unsigned short	__kernel_nlink_t;
-typedef long		__kernel_off_t;
-typedef int		__kernel_pid_t;
+#define __kernel_nlink_t __kernel_nlink_t
 typedef unsigned short	__kernel_ipc_pid_t;
+#define __kernel_ipc_pid_t __kernel_ipc_pid_t
 typedef unsigned short	__kernel_uid_t;
+#define __kernel_uid_t __kernel_uid_t
 typedef unsigned short	__kernel_gid_t;
+#define __kernel_gid_t __kernel_gid_t
 typedef long unsigned int	__kernel_size_t;
+#define __kernel_size_t __kernel_size_t
 typedef int		__kernel_ssize_t;
+#define __kernel_ssize_t __kernel_ssize_t
 typedef int		__kernel_ptrdiff_t;
-typedef long		__kernel_time_t;
-typedef long		__kernel_suseconds_t;
-typedef long		__kernel_clock_t;
-typedef int		__kernel_timer_t;
-typedef int		__kernel_clockid_t;
-typedef int		__kernel_daddr_t;
-typedef char *		__kernel_caddr_t;
-typedef unsigned short	__kernel_uid16_t;
-typedef unsigned short	__kernel_gid16_t;
+#define __kernel_ptrdiff_t __kernel_ptrdiff_t
 typedef unsigned int	__kernel_uid32_t;
+#define __kernel_uid32_t __kernel_uid32_t
 typedef unsigned int	__kernel_gid32_t;
+#define __kernel_gid32_t __kernel_gid32_t
 
 typedef unsigned short	__kernel_old_uid_t;
+#define __kernel_old_uid_t __kernel_old_uid_t
 typedef unsigned short	__kernel_old_gid_t;
+#define __kernel_old_gid_t __kernel_old_gid_t
 typedef unsigned short	__kernel_old_dev_t;
+#define __kernel_old_dev_t __kernel_old_dev_t
 
-#ifdef __GNUC__
-typedef long long	__kernel_loff_t;
-#endif
-
-typedef struct {
-	int	val[2];
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__)
-
-#undef	__FD_SET
-static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
-{
-	unsigned long __tmp = __fd / __NFDBITS;
-	unsigned long __rem = __fd % __NFDBITS;
-	__fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
-}
-
-#undef	__FD_CLR
-static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
-{
-	unsigned long __tmp = __fd / __NFDBITS;
-	unsigned long __rem = __fd % __NFDBITS;
-	__fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
-}
-
-
-#undef	__FD_ISSET
-static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
-{
-	unsigned long __tmp = __fd / __NFDBITS;
-	unsigned long __rem = __fd % __NFDBITS;
-	return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
-}
-
-/*
- * This will unroll the loop for the normal constant case (8 ints,
- * for a 256-bit fd_set)
- */
-#undef	__FD_ZERO
-static __inline__ void __FD_ZERO(__kernel_fd_set *__p)
-{
-	unsigned long *__tmp = __p->fds_bits;
-	int __i;
-
-	if (__builtin_constant_p(__FDSET_LONGS)) {
-		switch (__FDSET_LONGS) {
-		case 16:
-			__tmp[ 0] = 0; __tmp[ 1] = 0;
-			__tmp[ 2] = 0; __tmp[ 3] = 0;
-			__tmp[ 4] = 0; __tmp[ 5] = 0;
-			__tmp[ 6] = 0; __tmp[ 7] = 0;
-			__tmp[ 8] = 0; __tmp[ 9] = 0;
-			__tmp[10] = 0; __tmp[11] = 0;
-			__tmp[12] = 0; __tmp[13] = 0;
-			__tmp[14] = 0; __tmp[15] = 0;
-			return;
-
-		case 8:
-			__tmp[ 0] = 0; __tmp[ 1] = 0;
-			__tmp[ 2] = 0; __tmp[ 3] = 0;
-			__tmp[ 4] = 0; __tmp[ 5] = 0;
-			__tmp[ 6] = 0; __tmp[ 7] = 0;
-			return;
-
-		case 4:
-			__tmp[ 0] = 0; __tmp[ 1] = 0;
-			__tmp[ 2] = 0; __tmp[ 3] = 0;
-			return;
-		}
-	}
-	__i = __FDSET_LONGS;
-	while (__i) {
-		__i--;
-		*__tmp = 0;
-		__tmp++;
-	}
-}
-
-#endif /* defined(__KERNEL__) */
+#include <asm-generic/posix_types.h>
 
-#endif /* __ASM_SH64_POSIX_TYPES_H */
+#endif /* __ASM_SH_POSIX_TYPES_64_H */
diff --git a/arch/sh/include/asm/scatterlist.h b/arch/sh/include/asm/scatterlist.h
index c693d268a41..327cc2e4c97 100644
--- a/arch/sh/include/asm/scatterlist.h
+++ b/arch/sh/include/asm/scatterlist.h
@@ -1,28 +1,8 @@
 #ifndef __ASM_SH_SCATTERLIST_H
 #define __ASM_SH_SCATTERLIST_H
 
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long	sg_magic;
-#endif
-	unsigned long	page_link;
-	unsigned int	offset;		/* for highmem, page offset */
-	unsigned int	length;
-	dma_addr_t	dma_address;
-	unsigned int	dma_length;
-};
-
 #define ISA_DMA_THRESHOLD	PHYS_ADDR_MASK
 
-/* These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg)	((sg)->dma_address)
-#define sg_dma_len(sg)		((sg)->length)
+#include <asm-generic/scatterlist.h>
 
-#endif /* !(__ASM_SH_SCATTERLIST_H) */
+#endif /* __ASM_SH_SCATTERLIST_H */
diff --git a/arch/sh/include/asm/sembuf.h b/arch/sh/include/asm/sembuf.h
index d79f3bd570b..7673b83cfef 100644
--- a/arch/sh/include/asm/sembuf.h
+++ b/arch/sh/include/asm/sembuf.h
@@ -1,25 +1 @@
-#ifndef __ASM_SH_SEMBUF_H
-#define __ASM_SH_SEMBUF_H
-
-/* 
- * The semid64_ds structure for i386 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
-	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
-	__kernel_time_t	sem_otime;		/* last semop time */
-	unsigned long	__unused1;
-	__kernel_time_t	sem_ctime;		/* last change time */
-	unsigned long	__unused2;
-	unsigned long	sem_nsems;		/* no. of semaphores in array */
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* __ASM_SH_SEMBUF_H */
+#include <asm-generic/sembuf.h>
diff --git a/arch/sh/include/asm/serial.h b/arch/sh/include/asm/serial.h
index 11f854dd136..a0cb0caff15 100644
--- a/arch/sh/include/asm/serial.h
+++ b/arch/sh/include/asm/serial.h
@@ -1,19 +1 @@
-/*
- * include/asm-sh/serial.h
- *
- * Configuration details for 8250, 16450, 16550, etc. serial ports
- */
-
-#ifndef _ASM_SERIAL_H
-#define _ASM_SERIAL_H
-
-/*
- * This assumes you have a 1.8432 MHz clock for your UART.
- *
- * It'd be nice if someone built a serial card with a 24.576 MHz
- * clock, since the 16550A is capable of handling a top speed of 1.5
- * megabits/second; but this requires the faster clock.
- */
-#define BASE_BAUD ( 1843200 / 16 )
-
-#endif /* _ASM_SERIAL_H */
+#include <asm-generic/serial.h>
diff --git a/arch/sh/include/asm/setup.h b/arch/sh/include/asm/setup.h
index d450bcf59ee..ce3743599b2 100644
--- a/arch/sh/include/asm/setup.h
+++ b/arch/sh/include/asm/setup.h
@@ -1,7 +1,7 @@
 #ifndef _SH_SETUP_H
 #define _SH_SETUP_H
 
-#define COMMAND_LINE_SIZE 256
+#include <asm-generic/setup.h>
 
 #ifdef __KERNEL__
 /*
diff --git a/arch/sh/include/asm/shmbuf.h b/arch/sh/include/asm/shmbuf.h
index b2101f49052..83c05fc2de3 100644
--- a/arch/sh/include/asm/shmbuf.h
+++ b/arch/sh/include/asm/shmbuf.h
@@ -1,42 +1 @@
-#ifndef __ASM_SH_SHMBUF_H
-#define __ASM_SH_SHMBUF_H
-
-/* 
- * The shmid64_ds structure for i386 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
-	struct ipc64_perm	shm_perm;	/* operation perms */
-	size_t			shm_segsz;	/* size of segment (bytes) */
-	__kernel_time_t		shm_atime;	/* last attach time */
-	unsigned long		__unused1;
-	__kernel_time_t		shm_dtime;	/* last detach time */
-	unsigned long		__unused2;
-	__kernel_time_t		shm_ctime;	/* last change time */
-	unsigned long		__unused3;
-	__kernel_pid_t		shm_cpid;	/* pid of creator */
-	__kernel_pid_t		shm_lpid;	/* pid of last operator */
-	unsigned long		shm_nattch;	/* no. of current attaches */
-	unsigned long		__unused4;
-	unsigned long		__unused5;
-};
-
-struct shminfo64 {
-	unsigned long	shmmax;
-	unsigned long	shmmin;
-	unsigned long	shmmni;
-	unsigned long	shmseg;
-	unsigned long	shmall;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* __ASM_SH_SHMBUF_H */
+#include <asm-generic/shmbuf.h>
diff --git a/arch/sh/include/asm/signal.h b/arch/sh/include/asm/signal.h
index 9cc5f014468..9ac530a90bc 100644
--- a/arch/sh/include/asm/signal.h
+++ b/arch/sh/include/asm/signal.h
@@ -1,114 +1,10 @@
 #ifndef __ASM_SH_SIGNAL_H
 #define __ASM_SH_SIGNAL_H
 
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems.  */
-struct pt_regs;
-struct siginfo;
-
-#ifdef __KERNEL__
-/* Most things should be clean enough to redefine this at will, if care
-   is taken to make libc match.  */
-
-#define _NSIG		64
-#define _NSIG_BPW	32
-#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t;		/* at least 32 bits */
-
-typedef struct {
-	unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-#define NSIG		32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-#define SIGBUS		 7
-#define SIGFPE		 8
-#define SIGKILL		 9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-#define	SIGUNUSED	31
-
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN	32
-#define SIGRTMAX	_NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001
-#define SA_NOCLDWAIT	0x00000002
-#define SA_SIGINFO	0x00000004
-#define SA_ONSTACK	0x08000000
-#define SA_RESTART	0x10000000
-#define SA_NODEFER	0x40000000
-#define SA_RESETHAND	0x80000000
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
 #define SA_RESTORER	0x04000000
 
-/* 
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	2048
-#define SIGSTKSZ	8192
+#include <asm-generic/signal.h>
 
-#include <asm-generic/signal-defs.h>
-
-#ifdef __KERNEL__
 struct old_sigaction {
 	__sighandler_t sa_handler;
 	old_sigset_t sa_mask;
@@ -116,45 +12,4 @@ struct old_sigaction {
 	void (*sa_restorer)(void);
 };
 
-struct sigaction {
-	__sighandler_t sa_handler;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-	sigset_t sa_mask;		/* mask last for extensibility */
-};
-
-struct k_sigaction {
-	struct sigaction sa;
-};
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-struct sigaction {
-	union {
-	  __sighandler_t _sa_handler;
-	  void (*_sa_sigaction)(int, struct siginfo *, void *);
-	} _u;
-	sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-#define sa_handler	_u._sa_handler
-#define sa_sigaction	_u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
-	void *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-#include <asm/sigcontext.h>
-
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#endif /* __KERNEL__ */
-
 #endif /* __ASM_SH_SIGNAL_H */
diff --git a/arch/sh/include/asm/smp.h b/arch/sh/include/asm/smp.h
index c24e9c6a173..ca64f43abe6 100644
--- a/arch/sh/include/asm/smp.h
+++ b/arch/sh/include/asm/smp.h
@@ -43,7 +43,8 @@ void plat_start_cpu(unsigned int cpu, unsigned long entry_point);
 void plat_send_ipi(unsigned int cpu, unsigned int message);
 
 void arch_send_call_function_single_ipi(int cpu);
-void arch_send_call_function_ipi(cpumask_t mask);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
 
 #else
 
diff --git a/arch/sh/include/asm/socket.h b/arch/sh/include/asm/socket.h
index 345653b9682..6b71384b9d8 100644
--- a/arch/sh/include/asm/socket.h
+++ b/arch/sh/include/asm/socket.h
@@ -1,60 +1 @@
-#ifndef __ASM_SH_SOCKET_H
-#define __ASM_SH_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockopt(2) */
-#define SOL_SOCKET	1
-
-#define SO_DEBUG	1
-#define SO_REUSEADDR	2
-#define SO_TYPE		3
-#define SO_ERROR	4
-#define SO_DONTROUTE	5
-#define SO_BROADCAST	6
-#define SO_SNDBUF	7
-#define SO_RCVBUF	8
-#define SO_RCVBUFFORCE	32
-#define SO_SNDBUFFORCE	33
-#define SO_KEEPALIVE	9
-#define SO_OOBINLINE	10
-#define SO_NO_CHECK	11
-#define SO_PRIORITY	12
-#define SO_LINGER	13
-#define SO_BSDCOMPAT	14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED	16
-#define SO_PEERCRED	17
-#define SO_RCVLOWAT	18
-#define SO_SNDLOWAT	19
-#define SO_RCVTIMEO	20
-#define SO_SNDTIMEO	21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION		22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
-#define SO_SECURITY_ENCRYPTION_NETWORK		24
-
-#define SO_BINDTODEVICE	25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER        26
-#define SO_DETACH_FILTER        27
-
-#define SO_PEERNAME             28
-#define SO_TIMESTAMP		29
-#define SCM_TIMESTAMP		SO_TIMESTAMP
-
-#define SO_ACCEPTCONN		30
-
-#define SO_PEERSEC		31
-#define SO_PASSSEC		34
-#define SO_TIMESTAMPNS		35
-#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
-
-#define SO_MARK			36
-
-#define SO_TIMESTAMPING		37
-#define SCM_TIMESTAMPING	SO_TIMESTAMPING
-
-#endif /* __ASM_SH_SOCKET_H */
+#include <asm-generic/socket.h>
diff --git a/arch/sh/include/asm/swab.h b/arch/sh/include/asm/swab.h
index 0e08fe54ad7..1cd09767a7a 100644
--- a/arch/sh/include/asm/swab.h
+++ b/arch/sh/include/asm/swab.h
@@ -7,8 +7,7 @@
  */
 #include <linux/compiler.h>
 #include <linux/types.h>
-
-#define __SWAB_64_THRU_32__
+#include <asm-generic/swab.h>
 
 static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 {
diff --git a/arch/sh/include/asm/system.h b/arch/sh/include/asm/system.h
index a88895e6dcb..ab79e1f4fbe 100644
--- a/arch/sh/include/asm/system.h
+++ b/arch/sh/include/asm/system.h
@@ -154,6 +154,7 @@ extern struct dentry *sh_debugfs_root;
 
 void per_cpu_trap_init(void);
 void default_idle(void);
+void cpu_idle_wait(void);
 
 asmlinkage void break_point_trap(void);
 
diff --git a/arch/sh/include/asm/termbits.h b/arch/sh/include/asm/termbits.h
index 77db116948c..3935b106de7 100644
--- a/arch/sh/include/asm/termbits.h
+++ b/arch/sh/include/asm/termbits.h
@@ -1,198 +1 @@
-#ifndef __ASM_SH_TERMBITS_H
-#define __ASM_SH_TERMBITS_H
-
-#include <linux/posix_types.h>
-
-typedef unsigned char	cc_t;
-typedef unsigned int	speed_t;
-typedef unsigned int	tcflag_t;
-
-#define NCCS 19
-struct termios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-};
-
-struct termios2 {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-struct ktermios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-/* c_iflag bits */
-#define IGNBRK	0000001
-#define BRKINT	0000002
-#define IGNPAR	0000004
-#define PARMRK	0000010
-#define INPCK	0000020
-#define ISTRIP	0000040
-#define INLCR	0000100
-#define IGNCR	0000200
-#define ICRNL	0000400
-#define IUCLC	0001000
-#define IXON	0002000
-#define IXANY	0004000
-#define IXOFF	0010000
-#define IMAXBEL	0020000
-#define IUTF8	0040000
-
-/* c_oflag bits */
-#define OPOST	0000001
-#define OLCUC	0000002
-#define ONLCR	0000004
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-#define OFILL	0000100
-#define OFDEL	0000200
-#define NLDLY	0000400
-#define   NL0	0000000
-#define   NL1	0000400
-#define CRDLY	0003000
-#define   CR0	0000000
-#define   CR1	0001000
-#define   CR2	0002000
-#define   CR3	0003000
-#define TABDLY	0014000
-#define   TAB0	0000000
-#define   TAB1	0004000
-#define   TAB2	0010000
-#define   TAB3	0014000
-#define   XTABS	0014000
-#define BSDLY	0020000
-#define   BS0	0000000
-#define   BS1	0020000
-#define VTDLY	0040000
-#define   VT0	0000000
-#define   VT1	0040000
-#define FFDLY	0100000
-#define   FF0	0000000
-#define   FF1	0100000
-
-/* c_cflag bit meaning */
-#define CBAUD	0010017
-#define  B0	0000000		/* hang up */
-#define  B50	0000001
-#define  B75	0000002
-#define  B110	0000003
-#define  B134	0000004
-#define  B150	0000005
-#define  B200	0000006
-#define  B300	0000007
-#define  B600	0000010
-#define  B1200	0000011
-#define  B1800	0000012
-#define  B2400	0000013
-#define  B4800	0000014
-#define  B9600	0000015
-#define  B19200	0000016
-#define  B38400	0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE	0000060
-#define   CS5	0000000
-#define   CS6	0000020
-#define   CS7	0000040
-#define   CS8	0000060
-#define CSTOPB	0000100
-#define CREAD	0000200
-#define PARENB	0000400
-#define PARODD	0001000
-#define HUPCL	0002000
-#define CLOCAL	0004000
-#define CBAUDEX 0010000
-#define	   BOTHER 0010000
-#define    B57600 0010001
-#define   B115200 0010002
-#define   B230400 0010003
-#define   B460800 0010004
-#define   B500000 0010005
-#define   B576000 0010006
-#define   B921600 0010007
-#define  B1000000 0010010
-#define  B1152000 0010011
-#define  B1500000 0010012
-#define  B2000000 0010013
-#define  B2500000 0010014
-#define  B3000000 0010015
-#define  B3500000 0010016
-#define  B4000000 0010017
-#define CIBAUD	  002003600000		/* input baud rate */
-#define CMSPAR	  010000000000		/* mark or space (stick) parity */
-#define CRTSCTS	  020000000000		/* flow control */
-
-#define IBSHIFT	16		/* Shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-#define ISIG	0000001
-#define ICANON	0000002
-#define XCASE	0000004
-#define ECHO	0000010
-#define ECHOE	0000020
-#define ECHOK	0000040
-#define ECHONL	0000100
-#define NOFLSH	0000200
-#define TOSTOP	0000400
-#define ECHOCTL	0001000
-#define ECHOPRT	0002000
-#define ECHOKE	0004000
-#define FLUSHO	0010000
-#define PENDIN	0040000
-#define IEXTEN	0100000
-
-/* tcflow() and TCXONC use these */
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* tcflush() and TCFLSH use these */
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
-/* tcsetattr uses these */
-#define	TCSANOW		0
-#define	TCSADRAIN	1
-#define	TCSAFLUSH	2
-
-#endif /* __ASM_SH_TERMBITS_H */
+#include <asm-generic/termbits.h>
diff --git a/arch/sh/include/asm/termios.h b/arch/sh/include/asm/termios.h
index 0a8c793c76f..280d78a9d96 100644
--- a/arch/sh/include/asm/termios.h
+++ b/arch/sh/include/asm/termios.h
@@ -1,90 +1 @@
-#ifndef __ASM_SH_TERMIOS_H
-#define __ASM_SH_TERMIOS_H
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
-	unsigned short c_iflag;		/* input mode flags */
-	unsigned short c_oflag;		/* output mode flags */
-	unsigned short c_cflag;		/* control mode flags */
-	unsigned short c_lflag;		/* local mode flags */
-	unsigned char c_line;		/* line discipline */
-	unsigned char c_cc[NCC];	/* control characters */
-};
-
-/* modem lines */
-#define TIOCM_LE	0x001
-#define TIOCM_DTR	0x002
-#define TIOCM_RTS	0x004
-#define TIOCM_ST	0x008
-#define TIOCM_SR	0x010
-#define TIOCM_CTS	0x020
-#define TIOCM_CAR	0x040
-#define TIOCM_RNG	0x080
-#define TIOCM_DSR	0x100
-#define TIOCM_CD	TIOCM_CAR
-#define TIOCM_RI	TIOCM_RNG
-#define TIOCM_OUT1	0x2000
-#define TIOCM_OUT2	0x4000
-#define TIOCM_LOOP	0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-#ifdef __KERNEL__
-
-/*	intr=^C		quit=^\		erase=del	kill=^U
-	eof=^D		vtime=\0	vmin=\1		sxtc=\0
-	start=^Q	stop=^S		susp=^Z		eol=\0
-	reprint=^R	discard=^U	werase=^W	lnext=^V
-	eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
-	unsigned short __tmp; \
-	get_user(__tmp,&(termio)->x); \
-	*(unsigned short *) &(termios)->x = __tmp; \
-}
-
-#define user_termio_to_kernel_termios(termios, termio) \
-({ \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
-	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-#define kernel_termios_to_user_termio(termio, termios) \
-({ \
-	put_user((termios)->c_iflag, &(termio)->c_iflag); \
-	put_user((termios)->c_oflag, &(termio)->c_oflag); \
-	put_user((termios)->c_cflag, &(termio)->c_cflag); \
-	put_user((termios)->c_lflag, &(termio)->c_lflag); \
-	put_user((termios)->c_line,  &(termio)->c_line); \
-	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
-})
-
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
-#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
-
-#endif	/* __KERNEL__ */
-
-#endif	/* __ASM_SH_TERMIOS_H */
+#include <asm-generic/termios.h>
diff --git a/arch/sh/include/asm/timex.h b/arch/sh/include/asm/timex.h
index a873e24113c..b556d49e5f2 100644
--- a/arch/sh/include/asm/timex.h
+++ b/arch/sh/include/asm/timex.h
@@ -8,11 +8,6 @@
 
 #define CLOCK_TICK_RATE		(CONFIG_SH_PCLK_FREQ / 4) /* Underlying HZ */
 
-typedef unsigned long long cycles_t;
-
-static __inline__ cycles_t get_cycles (void)
-{
-	return 0;
-}
+#include <asm-generic/timex.h>
 
 #endif /* __ASM_SH_TIMEX_H */
diff --git a/arch/sh/include/asm/topology.h b/arch/sh/include/asm/topology.h
index 8489a0905a8..b69ee850906 100644
--- a/arch/sh/include/asm/topology.h
+++ b/arch/sh/include/asm/topology.h
@@ -35,9 +35,6 @@
 #define cpumask_of_node(node)	((void)node, cpu_online_mask)
 
 #define pcibus_to_node(bus)	((void)(bus), -1)
-#define pcibus_to_cpumask(bus)	(pcibus_to_node(bus) == -1 ? \
-					CPU_MASK_ALL : \
-					node_to_cpumask(pcibus_to_node(bus)))
 #define cpumask_of_pcibus(bus)	(pcibus_to_node(bus) == -1 ? \
 					CPU_MASK_ALL_PTR : \
 					cpumask_of_node(pcibus_to_node(bus)))
diff --git a/arch/sh/include/asm/types.h b/arch/sh/include/asm/types.h
index b13caca62a7..c7f3c94837d 100644
--- a/arch/sh/include/asm/types.h
+++ b/arch/sh/include/asm/types.h
@@ -1,27 +1,14 @@
 #ifndef __ASM_SH_TYPES_H
 #define __ASM_SH_TYPES_H
 
-#include <asm-generic/int-ll64.h>
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
+#include <asm-generic/types.h>
 
 /*
  * These aren't exported outside the kernel to avoid name space clashes
  */
 #ifdef __KERNEL__
-
-#define BITS_PER_LONG 32
-
 #ifndef __ASSEMBLY__
 
-/* Dma addresses are 32-bits wide.  */
-
-typedef u32 dma_addr_t;
-
 #ifdef CONFIG_SUPERH32
 typedef u16 insn_size_t;
 #else
@@ -29,7 +16,6 @@ typedef u32 insn_size_t;
 #endif
 
 #endif /* __ASSEMBLY__ */
-
 #endif /* __KERNEL__ */
 
 #endif /* __ASM_SH_TYPES_H */
diff --git a/arch/sh/include/asm/ucontext.h b/arch/sh/include/asm/ucontext.h
index 202ef1d5a3c..9bc07b9f30f 100644
--- a/arch/sh/include/asm/ucontext.h
+++ b/arch/sh/include/asm/ucontext.h
@@ -1,12 +1 @@
-#ifndef __ASM_SH_UCONTEXT_H
-#define __ASM_SH_UCONTEXT_H
-
-struct ucontext {
-	unsigned long	  uc_flags;
-	struct ucontext  *uc_link;
-	stack_t		  uc_stack;
-	struct sigcontext uc_mcontext;
-	sigset_t	  uc_sigmask;	/* mask last for extensibility */
-};
-
-#endif /* __ASM_SH_UCONTEXT_H */
+#include <asm-generic/ucontext.h>
diff --git a/arch/sh/include/asm/unaligned.h b/arch/sh/include/asm/unaligned.h
index 8c0ad5e4487..7d14e066996 100644
--- a/arch/sh/include/asm/unaligned.h
+++ b/arch/sh/include/asm/unaligned.h
@@ -6,19 +6,7 @@
 #include <asm/unaligned-sh4a.h>
 #else
 /* Otherwise, SH can't handle unaligned accesses. */
-#ifdef __LITTLE_ENDIAN__
-# include <linux/unaligned/le_struct.h>
-# include <linux/unaligned/be_byteshift.h>
-# include <linux/unaligned/generic.h>
-# define get_unaligned	__get_unaligned_le
-# define put_unaligned	__put_unaligned_le
-#else
-# include <linux/unaligned/be_struct.h>
-# include <linux/unaligned/le_byteshift.h>
-# include <linux/unaligned/generic.h>
-# define get_unaligned	__get_unaligned_be
-# define put_unaligned	__put_unaligned_be
-#endif
+#include <asm-generic/unaligned.h>
 #endif
 
 #endif /* _ASM_SH_UNALIGNED_H */
diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h
index 65197086a1c..61d6ad93d78 100644
--- a/arch/sh/include/asm/unistd_32.h
+++ b/arch/sh/include/asm/unistd_32.h
@@ -344,8 +344,9 @@
 #define __NR_preadv		333
 #define __NR_pwritev		334
 #define __NR_rt_tgsigqueueinfo	335
+#define __NR_perf_counter_open	336
 
-#define NR_syscalls 336
+#define NR_syscalls 337
 
 #ifdef __KERNEL__
 
diff --git a/arch/sh/include/asm/unistd_64.h b/arch/sh/include/asm/unistd_64.h
index 8014aea88ec..a751699afda 100644
--- a/arch/sh/include/asm/unistd_64.h
+++ b/arch/sh/include/asm/unistd_64.h
@@ -384,10 +384,11 @@
 #define __NR_preadv		361
 #define __NR_pwritev		362
 #define __NR_rt_tgsigqueueinfo	363
+#define __NR_perf_counter_open	364
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 364
+#define NR_syscalls 365
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/sh/include/mach-common/mach/highlander.h b/arch/sh/include/mach-common/mach/highlander.h
index bd26a848cb0..5d9d4d5154b 100644
--- a/arch/sh/include/mach-common/mach/highlander.h
+++ b/arch/sh/include/mach-common/mach/highlander.h
@@ -2,6 +2,9 @@
 #define __ASM_SH_RENESAS_R7780RP_H
 
 /* Box specific addresses.  */
+#define PA_NORFLASH_ADDR	0x00000000
+#define PA_NORFLASH_SIZE	0x04000000
+
 #if defined(CONFIG_SH_R7780MP)
 #define PA_BCR          0xa4000000      /* FPGA */
 #define PA_SDPOW	(-1)
diff --git a/arch/sh/kernel/cpu/clock-cpg.c b/arch/sh/kernel/cpu/clock-cpg.c
index 275942e58e4..6dfe2cced3f 100644
--- a/arch/sh/kernel/cpu/clock-cpg.c
+++ b/arch/sh/kernel/cpu/clock-cpg.c
@@ -1,6 +1,6 @@
 #include <linux/clk.h>
 #include <linux/compiler.h>
-#include <linux/bootmem.h>
+#include <linux/slab.h>
 #include <linux/io.h>
 #include <asm/clock.h>
 
@@ -127,10 +127,11 @@ int __init sh_clk_div6_register(struct clk *clks, int nr)
 	int k;
 
 	freq_table_size *= (nr_divs + 1);
-
-	freq_table = alloc_bootmem(freq_table_size * nr);
-	if (!freq_table)
+	freq_table = kzalloc(freq_table_size * nr, GFP_KERNEL);
+	if (!freq_table) {
+		pr_err("sh_clk_div6_register: unable to alloc memory\n");
 		return -ENOMEM;
+	}
 
 	for (k = 0; !ret && (k < nr); k++) {
 		clkp = clks + k;
@@ -175,10 +176,11 @@ int __init sh_clk_div4_register(struct clk *clks, int nr,
 	int k;
 
 	freq_table_size *= (nr_divs + 1);
-
-	freq_table = alloc_bootmem(freq_table_size * nr);
-	if (!freq_table)
+	freq_table = kzalloc(freq_table_size * nr, GFP_KERNEL);
+	if (!freq_table) {
+		pr_err("sh_clk_div4_register: unable to alloc memory\n");
 		return -ENOMEM;
+	}
 
 	for (k = 0; !ret && (k < nr); k++) {
 		clkp = clks + k;
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index 96ea09ca8cc..ebdd391d5f4 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -16,7 +16,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7366)	+= setup-sh7366.o
 obj-$(CONFIG_CPU_SUBTYPE_SHX3)		+= setup-shx3.o
 
 # SMP setup
-smp-$(CONFIG_CPU_SUBTYPE_SHX3)		:= smp-shx3.o
+smp-$(CONFIG_CPU_SHX3)			:= smp-shx3.o
 
 # Primary on-chip clocks (common)
 clock-$(CONFIG_CPU_SUBTYPE_SH7763)	:= clock-sh7763.o
@@ -38,6 +38,6 @@ pinmux-$(CONFIG_CPU_SUBTYPE_SH7724)	:= pinmux-sh7724.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7785)	:= pinmux-sh7785.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7786)	:= pinmux-sh7786.o
 
-obj-y			+= $(clock-y)
-obj-$(CONFIG_SMP)	+= $(smp-y)
+obj-y				+= $(clock-y)
+obj-$(CONFIG_SMP)		+= $(smp-y)
 obj-$(CONFIG_GENERIC_GPIO)	+= $(pinmux-y)
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
index 318516f6bfa..c18f7d09281 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
@@ -15,6 +15,7 @@
 #include <linux/serial_sci.h>
 #include <linux/uio_driver.h>
 #include <linux/sh_timer.h>
+#include <linux/usb/r8a66597.h>
 #include <asm/clock.h>
 
 static struct resource iic_resources[] = {
@@ -38,18 +39,20 @@ static struct platform_device iic_device = {
 	.resource       = iic_resources,
 };
 
+static struct r8a66597_platdata r8a66597_data = {
+	/* This set zero to all members */
+};
+
 static struct resource usb_host_resources[] = {
 	[0] = {
-		.name   = "r8a66597_hcd",
 		.start  = 0xa4d80000,
 		.end    = 0xa4d800ff,
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.name   = "r8a66597_hcd",
 		.start  = 65,
 		.end    = 65,
-		.flags  = IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
 	},
 };
 
@@ -59,6 +62,7 @@ static struct platform_device usb_host_device = {
 	.dev = {
 		.dma_mask		= NULL,
 		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &r8a66597_data,
 	},
 	.num_resources	= ARRAY_SIZE(usb_host_resources),
 	.resource	= usb_host_resources,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index d8f4a13aeff..e1bb80b2a27 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -13,6 +13,7 @@
 #include <linux/mm.h>
 #include <linux/serial_sci.h>
 #include <linux/uio_driver.h>
+#include <linux/usb/r8a66597.h>
 #include <linux/sh_timer.h>
 #include <linux/io.h>
 #include <asm/clock.h>
@@ -396,9 +397,12 @@ static struct platform_device rtc_device = {
 	.resource	= rtc_resources,
 };
 
+static struct r8a66597_platdata r8a66597_data = {
+	/* This set zero to all members */
+};
+
 static struct resource sh7723_usb_host_resources[] = {
 	[0] = {
-		.name	= "r8a66597_hcd",
 		.start	= 0xa4d80000,
 		.end	= 0xa4d800ff,
 		.flags	= IORESOURCE_MEM,
@@ -406,7 +410,7 @@ static struct resource sh7723_usb_host_resources[] = {
 	[1] = {
 		.start	= 65,
 		.end	= 65,
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
 	},
 };
 
@@ -416,6 +420,7 @@ static struct platform_device sh7723_usb_host_device = {
 	.dev = {
 		.dma_mask		= NULL,         /*  not use dma */
 		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &r8a66597_data,
 	},
 	.num_resources	= ARRAY_SIZE(sh7723_usb_host_resources),
 	.resource	= sh7723_usb_host_resources,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
index 93e0d2c017e..b70049470a0 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
@@ -595,9 +595,8 @@ enum {
 	HSPI,
 	GPIO0, GPIO1,
 	Thermal,
-	INTC0, INTC1, INTC2, INTC3, INTC4, INTC5, INTC6, INTC7,
-
-	/* interrupt groups */
+	INTICI0, INTICI1, INTICI2, INTICI3,
+	INTICI4, INTICI5, INTICI6, INTICI7,
 };
 
 static struct intc_vect vectors[] __initdata = {
@@ -638,10 +637,12 @@ static struct intc_vect vectors[] __initdata = {
 	INTC_VECT(HSPI, 0xe80),
 	INTC_VECT(GPIO0, 0xea0), INTC_VECT(GPIO1, 0xec0),
 	INTC_VECT(Thermal, 0xee0),
+	INTC_VECT(INTICI0, 0xf00), INTC_VECT(INTICI1, 0xf20),
+	INTC_VECT(INTICI2, 0xf40), INTC_VECT(INTICI3, 0xf60),
+	INTC_VECT(INTICI4, 0xf80), INTC_VECT(INTICI5, 0xfa0),
+	INTC_VECT(INTICI6, 0xfc0), INTC_VECT(INTICI7, 0xfe0),
 };
 
-/* FIXME: Main CPU support only now */
-#if 1 /* Main CPU */
 #define CnINTMSK0	0xfe410030
 #define CnINTMSK1	0xfe410040
 #define CnINTMSKCLR0	0xfe410050
@@ -654,21 +655,6 @@ static struct intc_vect vectors[] __initdata = {
 #define CnINT2MSKCR1	0xfe410a34
 #define CnINT2MSKCR2	0xfe410a38
 #define CnINT2MSKCR3	0xfe410a3c
-#else /* Sub CPU */
-#define CnINTMSK0	0xfe410034
-#define CnINTMSK1	0xfe410044
-#define CnINTMSKCLR0	0xfe410054
-#define CnINTMSKCLR1	0xfe410064
-#define CnINT2MSKR0	0xfe410b20
-#define CnINT2MSKR1	0xfe410b24
-#define CnINT2MSKR2	0xfe410b28
-#define CnINT2MSKR3	0xfe410b2c
-#define CnINT2MSKCR0	0xfe410b30
-#define CnINT2MSKCR1	0xfe410b34
-#define CnINT2MSKCR2	0xfe410b38
-#define CnINT2MSKCR3	0xfe410b3c
-#endif
-
 #define INTMSK2		0xfe410068
 #define INTMSKCLR2	0xfe41006c
 
@@ -753,6 +739,9 @@ static struct intc_prio_reg prio_registers[] __initdata = {
 						  GPIO1, Thermal } },
 	{ 0xfe41085c, 0, 32, 8, /* INT2PRI23 */ { 0, 0, 0, 0 } },
 	{ 0xfe410860, 0, 32, 8, /* INT2PRI24 */ { 0, 0, 0, 0 } },
+	{ 0xfe410090, 0xfe4100a0, 32, 4, /* CnICIPRI / CnICIPRICLR */
+	  { INTICI7, INTICI6, INTICI5, INTICI4,
+	    INTICI3, INTICI2, INTICI1, INTICI0 }, INTC_SMP(4, 2) },
 };
 
 static DECLARE_INTC_DESC(intc_desc, "sh7786", vectors, NULL,
diff --git a/arch/sh/kernel/cpu/sh4a/smp-shx3.c b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
index b8869aa20de..2b6b0d50c57 100644
--- a/arch/sh/kernel/cpu/sh4a/smp-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
@@ -35,8 +35,7 @@ void __init plat_smp_setup(void)
 	unsigned int cpu = 0;
 	int i, num;
 
-	cpus_clear(cpu_possible_map);
-	cpu_set(cpu, cpu_possible_map);
+	init_cpu_possible(cpumask_of(cpu));
 
 	__cpu_number_map[0] = 0;
 	__cpu_logical_map[0] = 0;
@@ -46,7 +45,7 @@ void __init plat_smp_setup(void)
 	 * for the total number of cores.
 	 */
 	for (i = 1, num = 0; i < NR_CPUS; i++) {
-		cpu_set(i, cpu_possible_map);
+		set_cpu_possible(i, true);
 		__cpu_number_map[i] = ++num;
 		__cpu_logical_map[num] = i;
 	}
diff --git a/arch/sh/kernel/ftrace.c b/arch/sh/kernel/ftrace.c
index 4c3247477aa..066f37dc32a 100644
--- a/arch/sh/kernel/ftrace.c
+++ b/arch/sh/kernel/ftrace.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2008 Matt Fleming <mjf@gentoo.org>
+ * Copyright (C) 2008 Matt Fleming <matt@console-pimps.org>
  * Copyright (C) 2008 Paul Mundt <lethal@linux-sh.org>
  *
  * Code for replacing ftrace calls with jumps.
@@ -19,30 +19,37 @@
 #include <asm/ftrace.h>
 #include <asm/cacheflush.h>
 
-static unsigned char ftrace_nop[] = {
-	0x09, 0x00,		/* nop */
-	0x09, 0x00,		/* nop */
-};
-
 static unsigned char ftrace_replaced_code[MCOUNT_INSN_SIZE];
 
-unsigned char *ftrace_nop_replace(void)
+static unsigned char ftrace_nop[4];
+/*
+ * If we're trying to nop out a call to a function, we instead
+ * place a call to the address after the memory table.
+ *
+ * 8c011060 <a>:
+ * 8c011060:       02 d1           mov.l   8c01106c <a+0xc>,r1
+ * 8c011062:       22 4f           sts.l   pr,@-r15
+ * 8c011064:       02 c7           mova    8c011070 <a+0x10>,r0
+ * 8c011066:       2b 41           jmp     @r1
+ * 8c011068:       2a 40           lds     r0,pr
+ * 8c01106a:       09 00           nop
+ * 8c01106c:       68 24           .word 0x2468     <--- ip
+ * 8c01106e:       1d 8c           .word 0x8c1d
+ * 8c011070:       26 4f           lds.l   @r15+,pr <--- ip + MCOUNT_INSN_SIZE
+ *
+ * We write 0x8c011070 to 0x8c01106c so that on entry to a() we branch
+ * past the _mcount call and continue executing code like normal.
+ */
+static unsigned char *ftrace_nop_replace(unsigned long ip)
 {
+	__raw_writel(ip + MCOUNT_INSN_SIZE, ftrace_nop);
 	return ftrace_nop;
 }
 
-static int is_sh_nop(unsigned char *ip)
-{
-	return strncmp(ip, ftrace_nop, sizeof(ftrace_nop));
-}
-
-unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr)
+static unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr)
 {
 	/* Place the address in the memory table. */
-	if (addr == CALLER_ADDR)
-		__raw_writel(addr + MCOUNT_INSN_OFFSET, ftrace_replaced_code);
-	else
-		__raw_writel(addr, ftrace_replaced_code);
+	__raw_writel(addr, ftrace_replaced_code);
 
 	/*
 	 * No locking needed, this must be called via kstop_machine
@@ -51,7 +58,7 @@ unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr)
 	return ftrace_replaced_code;
 }
 
-int ftrace_modify_code(unsigned long ip, unsigned char *old_code,
+static int ftrace_modify_code(unsigned long ip, unsigned char *old_code,
 		       unsigned char *new_code)
 {
 	unsigned char replaced[MCOUNT_INSN_SIZE];
@@ -66,13 +73,6 @@ int ftrace_modify_code(unsigned long ip, unsigned char *old_code,
 	 * kstop_machine, or before SMP starts.
 	 */
 
-	/*
-	 * If we're trying to nop out a call to a function, we instead
-	 * place a call to the address after the memory table.
-	 */
-	if (is_sh_nop(new_code) == 0)
-		__raw_writel(ip + MCOUNT_INSN_SIZE, (unsigned long)new_code);
-
 	/* read the text we want to modify */
 	if (probe_kernel_read(replaced, (void *)ip, MCOUNT_INSN_SIZE))
 		return -EFAULT;
@@ -92,13 +92,13 @@ int ftrace_modify_code(unsigned long ip, unsigned char *old_code,
 
 int ftrace_update_ftrace_func(ftrace_func_t func)
 {
-	unsigned long ip = (unsigned long)(&ftrace_call);
+	unsigned long ip = (unsigned long)(&ftrace_call) + MCOUNT_INSN_OFFSET;
 	unsigned char old[MCOUNT_INSN_SIZE], *new;
 
-	memcpy(old, (unsigned char *)(ip + MCOUNT_INSN_OFFSET), MCOUNT_INSN_SIZE);
+	memcpy(old, (unsigned char *)ip, MCOUNT_INSN_SIZE);
 	new = ftrace_call_replace(ip, (unsigned long)func);
 
-	return ftrace_modify_code(ip + MCOUNT_INSN_OFFSET, old, new);
+	return ftrace_modify_code(ip, old, new);
 }
 
 int ftrace_make_nop(struct module *mod,
@@ -108,7 +108,7 @@ int ftrace_make_nop(struct module *mod,
 	unsigned long ip = rec->ip;
 
 	old = ftrace_call_replace(ip, addr);
-	new = ftrace_nop_replace();
+	new = ftrace_nop_replace(ip);
 
 	return ftrace_modify_code(rec->ip, old, new);
 }
@@ -118,7 +118,7 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 	unsigned char *new, *old;
 	unsigned long ip = rec->ip;
 
-	old = ftrace_nop_replace();
+	old = ftrace_nop_replace(ip);
 	new = ftrace_call_replace(ip, addr);
 
 	return ftrace_modify_code(rec->ip, old, new);
diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c
index f35ed034885..27ff2dc093c 100644
--- a/arch/sh/kernel/idle.c
+++ b/arch/sh/kernel/idle.c
@@ -1,7 +1,7 @@
 /*
  * The idle loop for all SuperH platforms.
  *
- *  Copyright (C) 2002 - 2008  Paul Mundt
+ *  Copyright (C) 2002 - 2009  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -15,6 +15,7 @@
 #include <linux/preempt.h>
 #include <linux/thread_info.h>
 #include <linux/irqflags.h>
+#include <linux/smp.h>
 #include <asm/pgalloc.h>
 #include <asm/system.h>
 #include <asm/atomic.h>
@@ -79,3 +80,23 @@ void cpu_idle(void)
 		check_pgt_cache();
 	}
 }
+
+static void do_nothing(void *unused)
+{
+}
+
+/*
+ * cpu_idle_wait - Used to ensure that all the CPUs discard old value of
+ * pm_idle and update to new pm_idle value. Required while changing pm_idle
+ * handler on SMP systems.
+ *
+ * Caller must have changed pm_idle to the new value before the call. Old
+ * pm_idle value will not be used by any CPU after the return of this function.
+ */
+void cpu_idle_wait(void)
+{
+	smp_mb();
+	/* kick all the CPUs so that they exit out of pm_idle */
+	smp_call_function(do_nothing, NULL, 1);
+}
+EXPORT_SYMBOL_GPL(cpu_idle_wait);
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index 9289ede29c7..92d7740faab 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -119,8 +119,6 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
 	pid = do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0,
 		      &regs, 0, NULL, NULL);
 
-	trace_mark(kernel_arch_kthread_create, "pid %d fn %p", pid, fn);
-
 	return pid;
 }
 
@@ -367,11 +365,6 @@ asmlinkage int sys_execve(char __user *ufilename, char __user * __user *uargv,
 		goto out;
 
 	error = do_execve(filename, uargv, uenvp, regs);
-	if (error == 0) {
-		task_lock(current);
-		current->ptrace &= ~PT_DTRACE;
-		task_unlock(current);
-	}
 	putname(filename);
 out:
 	return error;
diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c
index 96be839040f..24de7421494 100644
--- a/arch/sh/kernel/process_64.c
+++ b/arch/sh/kernel/process_64.c
@@ -323,7 +323,6 @@ ATTRIB_NORET void kernel_thread_helper(void *arg, int (*fn)(void *))
 int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
 {
 	struct pt_regs regs;
-	int pid;
 
 	memset(&regs, 0, sizeof(regs));
 	regs.regs[2] = (unsigned long)arg;
@@ -333,12 +332,8 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
 	regs.sr = (1 << 30);
 
 	/* Ok, create the new process.. */
-	pid = do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0,
+	return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0,
 		      &regs, 0, NULL, NULL);
-
-	trace_mark(kernel_arch_kthread_create, "pid %d fn %p", pid, fn);
-
-	return pid;
 }
 
 /*
@@ -529,11 +524,6 @@ asmlinkage int sys_execve(char *ufilename, char **uargv,
 			  (char __user * __user *)uargv,
 			  (char __user * __user *)uenvp,
 			  pregs);
-	if (error == 0) {
-		task_lock(current);
-		current->ptrace &= ~PT_DTRACE;
-		task_unlock(current);
-	}
 	putname(filename);
 out:
 	return error;
diff --git a/arch/sh/kernel/sh_ksyms_64.c b/arch/sh/kernel/sh_ksyms_64.c
index 8f54ef0cfbc..f5bd156ea50 100644
--- a/arch/sh/kernel/sh_ksyms_64.c
+++ b/arch/sh/kernel/sh_ksyms_64.c
@@ -38,13 +38,6 @@ EXPORT_SYMBOL(clear_user_page);
 EXPORT_SYMBOL(flush_dcache_page);
 #endif
 
-/* Networking helper routines. */
-EXPORT_SYMBOL(csum_partial);
-EXPORT_SYMBOL(csum_partial_copy_nocheck);
-#ifdef CONFIG_IPV6
-EXPORT_SYMBOL(csum_ipv6_magic);
-#endif
-
 #ifdef CONFIG_VT
 EXPORT_SYMBOL(screen_info);
 #endif
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index 17784e19ae3..b5afbec1db5 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -332,8 +332,8 @@ get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size)
 
 /* These symbols are defined with the addresses in the vsyscall page.
    See vsyscall-trapa.S.  */
-extern void __user __kernel_sigreturn;
-extern void __user __kernel_rt_sigreturn;
+extern void __kernel_sigreturn(void);
+extern void __kernel_rt_sigreturn(void);
 
 static int setup_frame(int sig, struct k_sigaction *ka,
 			sigset_t *set, struct pt_regs *regs)
diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c
index 8f402741261..442d8d47a41 100644
--- a/arch/sh/kernel/smp.c
+++ b/arch/sh/kernel/smp.c
@@ -47,7 +47,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	plat_prepare_cpus(max_cpus);
 
 #ifndef CONFIG_HOTPLUG_CPU
-	cpu_present_map = cpu_possible_map;
+	init_cpu_present(&cpu_possible_map);
 #endif
 }
 
@@ -58,8 +58,8 @@ void __devinit smp_prepare_boot_cpu(void)
 	__cpu_number_map[0] = cpu;
 	__cpu_logical_map[0] = cpu;
 
-	cpu_set(cpu, cpu_online_map);
-	cpu_set(cpu, cpu_possible_map);
+	set_cpu_online(cpu, true);
+	set_cpu_possible(cpu, true);
 }
 
 asmlinkage void __cpuinit start_secondary(void)
@@ -171,11 +171,11 @@ void smp_send_stop(void)
 	smp_call_function(stop_this_cpu, 0, 0);
 }
 
-void arch_send_call_function_ipi(cpumask_t mask)
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
 {
 	int cpu;
 
-	for_each_cpu_mask(cpu, mask)
+	for_each_cpu(cpu, mask)
 		plat_send_ipi(cpu, SMP_MSG_FUNCTION);
 }
 
diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c
index e3a7e36639e..90d00e47264 100644
--- a/arch/sh/kernel/sys_sh.c
+++ b/arch/sh/kernel/sys_sh.c
@@ -88,8 +88,6 @@ asmlinkage int sys_ipc(uint call, int first, int second,
 	version = call >> 16; /* hack for backward compatibility */
 	call &= 0xffff;
 
-	trace_mark(kernel_arch_ipc_call, "call %u first %d", call, first);
-
 	if (call <= SEMTIMEDOP)
 		switch (call) {
 		case SEMOP:
diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S
index a9fff9f731e..f9e21fa2f59 100644
--- a/arch/sh/kernel/syscalls_32.S
+++ b/arch/sh/kernel/syscalls_32.S
@@ -352,3 +352,4 @@ ENTRY(sys_call_table)
 	.long sys_preadv
 	.long sys_pwritev
 	.long sys_rt_tgsigqueueinfo	/* 335 */
+	.long sys_perf_counter_open
diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S
index 75c1889af1e..bf420b616ae 100644
--- a/arch/sh/kernel/syscalls_64.S
+++ b/arch/sh/kernel/syscalls_64.S
@@ -390,3 +390,4 @@ sys_call_table:
 	.long sys_preadv
 	.long sys_pwritev
 	.long sys_rt_tgsigqueueinfo
+	.long sys_perf_counter_open
diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c
index 2edde32c764..9b352a1e3fb 100644
--- a/arch/sh/kernel/time.c
+++ b/arch/sh/kernel/time.c
@@ -91,21 +91,6 @@ module_init(rtc_generic_init);
 
 void (*board_time_init)(void);
 
-unsigned long long sched_clock(void)
-{
-	return (jiffies_64 - INITIAL_JIFFIES) * (NSEC_PER_SEC / HZ);
-}
-
-static void __init sh_late_time_init(void)
-{
-	/*
-	 * Make sure all compiled-in early timers register themselves.
-	 * Run probe() for one "earlytimer" device.
-	 */
-	early_platform_driver_register_all("earlytimer");
-	early_platform_driver_probe("earlytimer", 1, 0);
-}
-
 void __init time_init(void)
 {
 	if (board_time_init)
@@ -121,5 +106,15 @@ void __init time_init(void)
 	local_timer_setup(smp_processor_id());
 #endif
 
-	late_time_init = sh_late_time_init;
+	/*
+	 * Make sure all compiled-in early timers register themselves.
+	 *
+	 * Run probe() for two "earlytimer" devices, these will be the
+	 * clockevents and clocksource devices respectively. In the event
+	 * that only a clockevents device is available, we -ENODEV on the
+	 * clocksource and the jiffies clocksource is used transparently
+	 * instead. No error handling is necessary here.
+	 */
+	early_platform_driver_register_all("earlytimer");
+	early_platform_driver_probe("earlytimer", 2, 0);
 }
diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c
index 46348ed07cc..b3e0067db35 100644
--- a/arch/sh/kernel/traps.c
+++ b/arch/sh/kernel/traps.c
@@ -69,6 +69,7 @@ BUILD_TRAP_HANDLER(bug)
 		insn_size_t insn = *(insn_size_t *)instruction_pointer(regs);
 		if (insn == TRAPA_BUG_OPCODE)
 			handle_BUG(regs);
+		return;
 	}
 #endif
 
diff --git a/arch/sh/lib64/Makefile b/arch/sh/lib64/Makefile
index 4bacb9e8347..334bb2da36e 100644
--- a/arch/sh/lib64/Makefile
+++ b/arch/sh/lib64/Makefile
@@ -10,7 +10,7 @@
 #
 
 # Panic should really be compiled as PIC
-lib-y  := udelay.o c-checksum.o dbg.o panic.o memcpy.o memset.o \
+lib-y  := udelay.o dbg.o panic.o memcpy.o memset.o \
 	  copy_user_memcpy.o copy_page.o clear_page.o strcpy.o strlen.o
 
 # Extracted from libgcc
diff --git a/arch/sh/lib64/c-checksum.c b/arch/sh/lib64/c-checksum.c
deleted file mode 100644
index 73c0877e3a2..00000000000
--- a/arch/sh/lib64/c-checksum.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * arch/sh/lib64/c-checksum.c
- *
- * This file contains network checksum routines that are better done
- * in an architecture-specific manner due to speed..
- */
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/byteorder.h>
-#include <asm/uaccess.h>
-
-static inline unsigned short from64to16(unsigned long long x)
-{
-	/* add up 32-bit words for 33 bits */
-	x = (x & 0xffffffff) + (x >> 32);
-	/* add up 16-bit and 17-bit words for 17+c bits */
-	x = (x & 0xffff) + (x >> 16);
-	/* add up 16-bit and 2-bit for 16+c bit */
-	x = (x & 0xffff) + (x >> 16);
-	/* add up carry.. */
-	x = (x & 0xffff) + (x >> 16);
-	return x;
-}
-
-static inline unsigned short foldto16(unsigned long x)
-{
-	/* add up 16-bit for 17 bits */
-	x = (x & 0xffff) + (x >> 16);
-	/* add up carry.. */
-	x = (x & 0xffff) + (x >> 16);
-	return x;
-}
-
-static inline unsigned short myfoldto16(unsigned long long x)
-{
-	/* Fold down to 32-bits so we don't lose in the typedef-less
-	   network stack.  */
-	/* 64 to 33 */
-	x = (x & 0xffffffff) + (x >> 32);
-	/* 33 to 32 */
-	x = (x & 0xffffffff) + (x >> 32);
-
-	/* add up 16-bit for 17 bits */
-	x = (x & 0xffff) + (x >> 16);
-	/* add up carry.. */
-	x = (x & 0xffff) + (x >> 16);
-	return x;
-}
-
-#define odd(x) ((x)&1)
-#define U16(x) ntohs(x)
-
-static unsigned long do_csum(const unsigned char *buff, int len)
-{
-	int odd, count;
-	unsigned long result = 0;
-
-	pr_debug("do_csum buff %p, len %d (0x%x)\n", buff, len, len);
-#ifdef DEBUG
-	for (i = 0; i < len; i++) {
-		if ((i % 26) == 0)
-			printk("\n");
-		printk("%02X ", buff[i]);
-	}
-#endif
-
-	if (len <= 0)
-		goto out;
-
-	odd = 1 & (unsigned long) buff;
-	if (odd) {
-		result = *buff << 8;
-		len--;
-		buff++;
-	}
-	count = len >> 1;	/* nr of 16-bit words.. */
-	if (count) {
-		if (2 & (unsigned long) buff) {
-			result += *(unsigned short *) buff;
-			count--;
-			len -= 2;
-			buff += 2;
-		}
-		count >>= 1;	/* nr of 32-bit words.. */
-		if (count) {
-			unsigned long carry = 0;
-			do {
-				unsigned long w = *(unsigned long *) buff;
-				buff += 4;
-				count--;
-				result += carry;
-				result += w;
-				carry = (w > result);
-			} while (count);
-			result += carry;
-			result = (result & 0xffff) + (result >> 16);
-		}
-		if (len & 2) {
-			result += *(unsigned short *) buff;
-			buff += 2;
-		}
-	}
-	if (len & 1)
-		result += *buff;
-	result = foldto16(result);
-	if (odd)
-		result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
-
-	pr_debug("\nCHECKSUM is 0x%lx\n", result);
-
-      out:
-	return result;
-}
-
-/* computes the checksum of a memory block at buff, length len,
-   and adds in "sum" (32-bit)  */
-__wsum csum_partial(const void *buff, int len, __wsum sum)
-{
-	unsigned long long result = do_csum(buff, len);
-
-	/* add in old sum, and carry.. */
-	result += (__force u32)sum;
-	/* 32+c bits -> 32 bits */
-	result = (result & 0xffffffff) + (result >> 32);
-
-	pr_debug("csum_partial, buff %p len %d sum 0x%x result=0x%016Lx\n",
-		buff, len, sum, result);
-
-	return (__force __wsum)result;
-}
-
-/* Copy while checksumming, otherwise like csum_partial.  */
-__wsum
-csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
-{
-	sum = csum_partial(src, len, sum);
-	memcpy(dst, src, len);
-
-	return sum;
-}
-
-/* Copy from userspace and compute checksum.  If we catch an exception
-   then zero the rest of the buffer.  */
-__wsum
-csum_partial_copy_from_user(const void __user *src, void *dst, int len,
-			    __wsum sum, int *err_ptr)
-{
-	int missing;
-
-	pr_debug
-	    ("csum_partial_copy_from_user src %p, dest %p, len %d, sum %08x, err_ptr %p\n",
-	     src, dst, len, sum, err_ptr);
-	missing = copy_from_user(dst, src, len);
-	pr_debug("  access_ok %d\n", __access_ok((unsigned long) src, len));
-	pr_debug("  missing %d\n", missing);
-	if (missing) {
-		memset(dst + len - missing, 0, missing);
-		*err_ptr = -EFAULT;
-	}
-
-	return csum_partial(dst, len, sum);
-}
-
-/* Copy to userspace and compute checksum.  */
-__wsum
-csum_partial_copy_to_user(const unsigned char *src, unsigned char *dst, int len,
-			  __wsum sum, int *err_ptr)
-{
-	sum = csum_partial(src, len, sum);
-
-	if (copy_to_user(dst, src, len))
-		*err_ptr = -EFAULT;
-
-	return sum;
-}
-
-/*
- *	This is a version of ip_compute_csum() optimized for IP headers,
- *	which always checksum on 4 octet boundaries.
- */
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
-	pr_debug("ip_fast_csum %p,%d\n", iph, ihl);
-
-	return (__force __sum16)~do_csum(iph, ihl * 4);
-}
-
-__wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-				unsigned short len,
-				unsigned short proto, __wsum sum)
-{
-	unsigned long long result;
-
-	pr_debug("ntohs(0x%x)=0x%x\n", 0xdead, ntohs(0xdead));
-	pr_debug("htons(0x%x)=0x%x\n", 0xdead, htons(0xdead));
-
-	result = (__force u64) saddr + (__force u64) daddr +
-		 (__force u64) sum + ((len + proto) << 8);
-
-	/* Fold down to 32-bits so we don't lose in the typedef-less
-	   network stack.  */
-	/* 64 to 33 */
-	result = (result & 0xffffffff) + (result >> 32);
-	/* 33 to 32 */
-	result = (result & 0xffffffff) + (result >> 32);
-
-	pr_debug("%s saddr %x daddr %x len %x proto %x sum %x result %08Lx\n",
-		__func__, saddr, daddr, len, proto, sum, result);
-
-	return (__wsum)result;
-}
-EXPORT_SYMBOL(csum_tcpudp_nofold);
diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index 31a33ebdef6..cc8ddbdf3d7 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -133,7 +133,7 @@ good_area:
 	 * the fault.
 	 */
 survive:
-	fault = handle_mm_fault(mm, vma, address, writeaccess);
+	fault = handle_mm_fault(mm, vma, address, writeaccess ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
@@ -249,9 +249,6 @@ static inline int notify_page_fault(struct pt_regs *regs, int trap)
 {
 	int ret = 0;
 
-	trace_mark(kernel_arch_trap_entry, "trap_id %d ip #p%ld",
-		   trap >> 5, instruction_pointer(regs));
-
 #ifdef CONFIG_KPROBES
 	if (!user_mode(regs)) {
 		preempt_disable();
@@ -327,6 +324,5 @@ asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs,
 
 	ret = 0;
 out:
-	trace_mark(kernel_arch_trap_exit, MARK_NOARGS);
 	return ret;
 }
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index ee8e6bbe882..fe532aeaa16 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -70,7 +70,7 @@ static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot)
 	}
 
 	set_pte(pte, pfn_pte(phys >> PAGE_SHIFT, prot));
-	flush_tlb_one(get_asid(), addr);
+	local_flush_tlb_one(get_asid(), addr);
 }
 
 /*
@@ -177,10 +177,8 @@ void __init paging_init(void)
 
 	free_area_init_nodes(max_zone_pfns);
 
-#ifdef CONFIG_SUPERH32
 	/* Set up the uncached fixmap */
 	set_fixmap_nocache(FIX_UNCACHED, __pa(&__uncached_start));
-#endif
 }
 
 static struct kcore_list kcore_mem, kcore_vmalloc;
diff --git a/arch/sh/mm/tlbflush_64.c b/arch/sh/mm/tlbflush_64.c
index 7876997ba19..fcbb6e135ce 100644
--- a/arch/sh/mm/tlbflush_64.c
+++ b/arch/sh/mm/tlbflush_64.c
@@ -187,7 +187,7 @@ good_area:
 	 * the fault.
 	 */
 survive:
-	fault = handle_mm_fault(mm, vma, address, writeaccess);
+	fault = handle_mm_fault(mm, vma, address, writeaccess ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
diff --git a/arch/sparc/include/asm/pci_64.h b/arch/sparc/include/asm/pci_64.h
index 4f79a54948f..7a1e3566e59 100644
--- a/arch/sparc/include/asm/pci_64.h
+++ b/arch/sparc/include/asm/pci_64.h
@@ -191,8 +191,6 @@ extern void
 pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
 			struct pci_bus_region *region);
 
-extern struct resource *pcibios_select_root(struct pci_dev *, struct resource *);
-
 static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 {
 	return PCI_IRQ_NONE;
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index 4638fba799e..57859ad2354 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -711,19 +711,6 @@ void __devinit pcibios_fixup_bus(struct pci_bus *pbus)
 	pbus->resource[1] = &pbm->mem_space;
 }
 
-struct resource *pcibios_select_root(struct pci_dev *pdev, struct resource *r)
-{
-	struct pci_pbm_info *pbm = pdev->bus->sysdata;
-	struct resource *root = NULL;
-
-	if (r->flags & IORESOURCE_IO)
-		root = &pbm->io_space;
-	if (r->flags & IORESOURCE_MEM)
-		root = &pbm->mem_space;
-
-	return root;
-}
-
 void pcibios_update_irq(struct pci_dev *pdev, int irq)
 {
 }
diff --git a/arch/sparc/mm/fault_32.c b/arch/sparc/mm/fault_32.c
index 12e447fc854..a5e30c642ee 100644
--- a/arch/sparc/mm/fault_32.c
+++ b/arch/sparc/mm/fault_32.c
@@ -241,7 +241,7 @@ good_area:
 	 * make sure we exit gracefully rather than endlessly redo
 	 * the fault.
 	 */
-	fault = handle_mm_fault(mm, vma, address, write);
+	fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
@@ -484,7 +484,7 @@ good_area:
 		if(!(vma->vm_flags & (VM_READ | VM_EXEC)))
 			goto bad_area;
 	}
-	switch (handle_mm_fault(mm, vma, address, write)) {
+	switch (handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0)) {
 	case VM_FAULT_SIGBUS:
 	case VM_FAULT_OOM:
 		goto do_sigbus;
diff --git a/arch/sparc/mm/fault_64.c b/arch/sparc/mm/fault_64.c
index 4ab8993b086..e5620b27c8b 100644
--- a/arch/sparc/mm/fault_64.c
+++ b/arch/sparc/mm/fault_64.c
@@ -398,7 +398,7 @@ good_area:
 			goto bad_area;
 	}
 
-	fault = handle_mm_fault(mm, vma, address, (fault_code & FAULT_CODE_WRITE));
+	fault = handle_mm_fault(mm, vma, address, (fault_code & FAULT_CODE_WRITE) ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index ca92e2f54e4..ed6be6ba2f4 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -1796,10 +1796,16 @@ void __init paging_init(void)
 
 	prom_build_devicetree();
 	of_populate_present_mask();
+#ifndef CONFIG_SMP
+	of_fill_in_cpu_data();
+#endif
 
 	if (tlb_type == hypervisor) {
 		sun4v_mdesc_init();
 		mdesc_populate_present_mask(cpu_all_mask);
+#ifndef CONFIG_SMP
+		mdesc_fill_in_cpu_data(cpu_all_mask);
+#endif
 	}
 
 	/* Once the OF device tree and MDESC have been setup, we know
diff --git a/arch/um/kernel/trap.c b/arch/um/kernel/trap.c
index 7384d8accfe..637c6505dc0 100644
--- a/arch/um/kernel/trap.c
+++ b/arch/um/kernel/trap.c
@@ -65,7 +65,7 @@ good_area:
 	do {
 		int fault;
 
-		fault = handle_mm_fault(mm, vma, address, is_write);
+		fault = handle_mm_fault(mm, vma, address, is_write ? FAULT_FLAG_WRITE : 0);
 		if (unlikely(fault & VM_FAULT_ERROR)) {
 			if (fault & VM_FAULT_OOM) {
 				goto out_of_memory;
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index cf42fc30541..d1430ef6b4f 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -28,11 +28,13 @@ config X86
 	select HAVE_KPROBES
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARCH_WANT_FRAME_POINTERS
+	select HAVE_DMA_ATTRS
 	select HAVE_KRETPROBES
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_FUNCTION_GRAPH_FP_TEST
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
 	select HAVE_FTRACE_NMI_ENTER if DYNAMIC_FTRACE
 	select HAVE_FTRACE_SYSCALLS
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index 8d16ada2504..ec749c2bfdd 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -70,6 +70,7 @@ KBUILD_CFLAGS	:= $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \
 		   $(call cc-option, -mpreferred-stack-boundary=2)
 KBUILD_CFLAGS	+= $(call cc-option, -m32)
 KBUILD_AFLAGS	:= $(KBUILD_CFLAGS) -D__ASSEMBLY__
+GCOV_PROFILE := n
 
 $(obj)/bzImage: asflags-y  := $(SVGA_MODE)
 
diff --git a/arch/x86/boot/bioscall.S b/arch/x86/boot/bioscall.S
index 507793739ea..1dfbf64e52a 100644
--- a/arch/x86/boot/bioscall.S
+++ b/arch/x86/boot/bioscall.S
@@ -13,7 +13,7 @@
  * touching registers they shouldn't be.
  */
 
-	.code16
+	.code16gcc
 	.text
 	.globl	intcall
 	.type	intcall, @function
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 49c8a4c37d7..e2ff504b4dd 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -15,6 +15,7 @@ KBUILD_CFLAGS += $(call cc-option,-ffreestanding)
 KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
 
 KBUILD_AFLAGS  := $(KBUILD_CFLAGS) -D__ASSEMBLY__
+GCOV_PROFILE := n
 
 LDFLAGS := -m elf_$(UTS_MACHINE)
 LDFLAGS_vmlinux := -T
diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S
index caba9960170..eb0566e8331 100644
--- a/arch/x86/crypto/aesni-intel_asm.S
+++ b/arch/x86/crypto/aesni-intel_asm.S
@@ -845,7 +845,7 @@ ENTRY(aesni_cbc_enc)
  */
 ENTRY(aesni_cbc_dec)
 	cmp $16, LEN
-	jb .Lcbc_dec_ret
+	jb .Lcbc_dec_just_ret
 	mov 480(KEYP), KLEN
 	add $240, KEYP
 	movups (IVP), IV
@@ -891,6 +891,7 @@ ENTRY(aesni_cbc_dec)
 	add $16, OUTP
 	cmp $16, LEN
 	jge .Lcbc_dec_loop1
-	movups IV, (IVP)
 .Lcbc_dec_ret:
+	movups IV, (IVP)
+.Lcbc_dec_just_ret:
 	ret
diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c
index 4e663398f77..c580c5ec1ca 100644
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -198,6 +198,7 @@ static int ecb_encrypt(struct blkcipher_desc *desc,
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
 	err = blkcipher_walk_virt(desc, &walk);
+	desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
 
 	kernel_fpu_begin();
 	while ((nbytes = walk.nbytes)) {
@@ -221,6 +222,7 @@ static int ecb_decrypt(struct blkcipher_desc *desc,
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
 	err = blkcipher_walk_virt(desc, &walk);
+	desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
 
 	kernel_fpu_begin();
 	while ((nbytes = walk.nbytes)) {
@@ -266,6 +268,7 @@ static int cbc_encrypt(struct blkcipher_desc *desc,
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
 	err = blkcipher_walk_virt(desc, &walk);
+	desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
 
 	kernel_fpu_begin();
 	while ((nbytes = walk.nbytes)) {
@@ -289,6 +292,7 @@ static int cbc_decrypt(struct blkcipher_desc *desc,
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
 	err = blkcipher_walk_virt(desc, &walk);
+	desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
 
 	kernel_fpu_begin();
 	while ((nbytes = walk.nbytes)) {
diff --git a/arch/x86/crypto/fpu.c b/arch/x86/crypto/fpu.c
index 5f9781a3815..daef6cd2b45 100644
--- a/arch/x86/crypto/fpu.c
+++ b/arch/x86/crypto/fpu.c
@@ -48,7 +48,7 @@ static int crypto_fpu_encrypt(struct blkcipher_desc *desc_in,
 	struct blkcipher_desc desc = {
 		.tfm = child,
 		.info = desc_in->info,
-		.flags = desc_in->flags,
+		.flags = desc_in->flags & ~CRYPTO_TFM_REQ_MAY_SLEEP,
 	};
 
 	kernel_fpu_begin();
@@ -67,7 +67,7 @@ static int crypto_fpu_decrypt(struct blkcipher_desc *desc_in,
 	struct blkcipher_desc desc = {
 		.tfm = child,
 		.info = desc_in->info,
-		.flags = desc_in->flags,
+		.flags = desc_in->flags & ~CRYPTO_TFM_REQ_MAY_SLEEP,
 	};
 
 	kernel_fpu_begin();
diff --git a/arch/x86/include/asm/amd_iommu.h b/arch/x86/include/asm/amd_iommu.h
index 262e0282004..bdf96f119f0 100644
--- a/arch/x86/include/asm/amd_iommu.h
+++ b/arch/x86/include/asm/amd_iommu.h
@@ -29,9 +29,11 @@ extern void amd_iommu_detect(void);
 extern irqreturn_t amd_iommu_int_handler(int irq, void *data);
 extern void amd_iommu_flush_all_domains(void);
 extern void amd_iommu_flush_all_devices(void);
+extern void amd_iommu_shutdown(void);
 #else
 static inline int amd_iommu_init(void) { return -ENODEV; }
 static inline void amd_iommu_detect(void) { }
+static inline void amd_iommu_shutdown(void) { }
 #endif
 
 #endif /* _ASM_X86_AMD_IOMMU_H */
diff --git a/arch/x86/include/asm/atomic_32.h b/arch/x86/include/asm/atomic_32.h
index 8cb9c814e12..2503d4e64c2 100644
--- a/arch/x86/include/asm/atomic_32.h
+++ b/arch/x86/include/asm/atomic_32.h
@@ -257,7 +257,7 @@ typedef struct {
 
 /**
  * atomic64_read - read atomic64 variable
- * @v: pointer of type atomic64_t
+ * @ptr: pointer of type atomic64_t
  *
  * Atomically reads the value of @v.
  * Doesn't imply a read memory barrier.
@@ -294,7 +294,6 @@ atomic64_cmpxchg(atomic64_t *ptr, unsigned long long old_val,
  * atomic64_xchg - xchg atomic64 variable
  * @ptr:      pointer to type atomic64_t
  * @new_val:  value to assign
- * @old_val:  old value that was there
  *
  * Atomically xchgs the value of @ptr to @new_val and returns
  * the old value.
diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h
index c45f415ce31..c993e9e0fed 100644
--- a/arch/x86/include/asm/desc.h
+++ b/arch/x86/include/asm/desc.h
@@ -1,7 +1,6 @@
 #ifndef _ASM_X86_DESC_H
 #define _ASM_X86_DESC_H
 
-#ifndef __ASSEMBLY__
 #include <asm/desc_defs.h>
 #include <asm/ldt.h>
 #include <asm/mmu.h>
@@ -380,29 +379,4 @@ static inline void set_system_intr_gate_ist(int n, void *addr, unsigned ist)
 	_set_gate(n, GATE_INTERRUPT, addr, 0x3, ist, __KERNEL_CS);
 }
 
-#else
-/*
- * GET_DESC_BASE reads the descriptor base of the specified segment.
- *
- * Args:
- *    idx - descriptor index
- *    gdt - GDT pointer
- *    base - 32bit register to which the base will be written
- *    lo_w - lo word of the "base" register
- *    lo_b - lo byte of the "base" register
- *    hi_b - hi byte of the low word of the "base" register
- *
- * Example:
- *    GET_DESC_BASE(GDT_ENTRY_ESPFIX_SS, %ebx, %eax, %ax, %al, %ah)
- *    Will read the base address of GDT_ENTRY_ESPFIX_SS and put it into %eax.
- */
-#define GET_DESC_BASE(idx, gdt, base, lo_w, lo_b, hi_b) \
-	movb idx * 8 + 4(gdt), lo_b;			\
-	movb idx * 8 + 7(gdt), hi_b;			\
-	shll $16, base;					\
-	movw idx * 8 + 2(gdt), lo_w;
-
-
-#endif /* __ASSEMBLY__ */
-
 #endif /* _ASM_X86_DESC_H */
diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h
index b93405b228b..1c3f9435f1c 100644
--- a/arch/x86/include/asm/dma-mapping.h
+++ b/arch/x86/include/asm/dma-mapping.h
@@ -33,6 +33,8 @@ static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 #endif
 }
 
+#include <asm-generic/dma-mapping-common.h>
+
 /* Make sure we keep the same behaviour */
 static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
@@ -53,177 +55,6 @@ extern int dma_set_mask(struct device *dev, u64 mask);
 extern void *dma_generic_alloc_coherent(struct device *dev, size_t size,
 					dma_addr_t *dma_addr, gfp_t flag);
 
-static inline dma_addr_t
-dma_map_single(struct device *hwdev, void *ptr, size_t size,
-	       enum dma_data_direction dir)
-{
-	struct dma_map_ops *ops = get_dma_ops(hwdev);
-	dma_addr_t addr;
-
-	BUG_ON(!valid_dma_direction(dir));
-	kmemcheck_mark_initialized(ptr, size);
-	addr = ops->map_page(hwdev, virt_to_page(ptr),
-			     (unsigned long)ptr & ~PAGE_MASK, size,
-			     dir, NULL);
-	debug_dma_map_page(hwdev, virt_to_page(ptr),
-			   (unsigned long)ptr & ~PAGE_MASK, size,
-			   dir, addr, true);
-	return addr;
-}
-
-static inline void
-dma_unmap_single(struct device *dev, dma_addr_t addr, size_t size,
-		 enum dma_data_direction dir)
-{
-	struct dma_map_ops *ops = get_dma_ops(dev);
-
-	BUG_ON(!valid_dma_direction(dir));
-	if (ops->unmap_page)
-		ops->unmap_page(dev, addr, size, dir, NULL);
-	debug_dma_unmap_page(dev, addr, size, dir, true);
-}
-
-static inline int
-dma_map_sg(struct device *hwdev, struct scatterlist *sg,
-	   int nents, enum dma_data_direction dir)
-{
-	struct dma_map_ops *ops = get_dma_ops(hwdev);
-	int ents;
-	struct scatterlist *s;
-	int i;
-
-	BUG_ON(!valid_dma_direction(dir));
-	for_each_sg(sg, s, nents, i)
-		kmemcheck_mark_initialized(sg_virt(s), s->length);
-	ents = ops->map_sg(hwdev, sg, nents, dir, NULL);
-	debug_dma_map_sg(hwdev, sg, nents, ents, dir);
-
-	return ents;
-}
-
-static inline void
-dma_unmap_sg(struct device *hwdev, struct scatterlist *sg, int nents,
-	     enum dma_data_direction dir)
-{
-	struct dma_map_ops *ops = get_dma_ops(hwdev);
-
-	BUG_ON(!valid_dma_direction(dir));
-	debug_dma_unmap_sg(hwdev, sg, nents, dir);
-	if (ops->unmap_sg)
-		ops->unmap_sg(hwdev, sg, nents, dir, NULL);
-}
-
-static inline void
-dma_sync_single_for_cpu(struct device *hwdev, dma_addr_t dma_handle,
-			size_t size, enum dma_data_direction dir)
-{
-	struct dma_map_ops *ops = get_dma_ops(hwdev);
-
-	BUG_ON(!valid_dma_direction(dir));
-	if (ops->sync_single_for_cpu)
-		ops->sync_single_for_cpu(hwdev, dma_handle, size, dir);
-	debug_dma_sync_single_for_cpu(hwdev, dma_handle, size, dir);
-	flush_write_buffers();
-}
-
-static inline void
-dma_sync_single_for_device(struct device *hwdev, dma_addr_t dma_handle,
-			   size_t size, enum dma_data_direction dir)
-{
-	struct dma_map_ops *ops = get_dma_ops(hwdev);
-
-	BUG_ON(!valid_dma_direction(dir));
-	if (ops->sync_single_for_device)
-		ops->sync_single_for_device(hwdev, dma_handle, size, dir);
-	debug_dma_sync_single_for_device(hwdev, dma_handle, size, dir);
-	flush_write_buffers();
-}
-
-static inline void
-dma_sync_single_range_for_cpu(struct device *hwdev, dma_addr_t dma_handle,
-			      unsigned long offset, size_t size,
-			      enum dma_data_direction dir)
-{
-	struct dma_map_ops *ops = get_dma_ops(hwdev);
-
-	BUG_ON(!valid_dma_direction(dir));
-	if (ops->sync_single_range_for_cpu)
-		ops->sync_single_range_for_cpu(hwdev, dma_handle, offset,
-					       size, dir);
-	debug_dma_sync_single_range_for_cpu(hwdev, dma_handle,
-					    offset, size, dir);
-	flush_write_buffers();
-}
-
-static inline void
-dma_sync_single_range_for_device(struct device *hwdev, dma_addr_t dma_handle,
-				 unsigned long offset, size_t size,
-				 enum dma_data_direction dir)
-{
-	struct dma_map_ops *ops = get_dma_ops(hwdev);
-
-	BUG_ON(!valid_dma_direction(dir));
-	if (ops->sync_single_range_for_device)
-		ops->sync_single_range_for_device(hwdev, dma_handle,
-						  offset, size, dir);
-	debug_dma_sync_single_range_for_device(hwdev, dma_handle,
-					       offset, size, dir);
-	flush_write_buffers();
-}
-
-static inline void
-dma_sync_sg_for_cpu(struct device *hwdev, struct scatterlist *sg,
-		    int nelems, enum dma_data_direction dir)
-{
-	struct dma_map_ops *ops = get_dma_ops(hwdev);
-
-	BUG_ON(!valid_dma_direction(dir));
-	if (ops->sync_sg_for_cpu)
-		ops->sync_sg_for_cpu(hwdev, sg, nelems, dir);
-	debug_dma_sync_sg_for_cpu(hwdev, sg, nelems, dir);
-	flush_write_buffers();
-}
-
-static inline void
-dma_sync_sg_for_device(struct device *hwdev, struct scatterlist *sg,
-		       int nelems, enum dma_data_direction dir)
-{
-	struct dma_map_ops *ops = get_dma_ops(hwdev);
-
-	BUG_ON(!valid_dma_direction(dir));
-	if (ops->sync_sg_for_device)
-		ops->sync_sg_for_device(hwdev, sg, nelems, dir);
-	debug_dma_sync_sg_for_device(hwdev, sg, nelems, dir);
-
-	flush_write_buffers();
-}
-
-static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
-				      size_t offset, size_t size,
-				      enum dma_data_direction dir)
-{
-	struct dma_map_ops *ops = get_dma_ops(dev);
-	dma_addr_t addr;
-
-	BUG_ON(!valid_dma_direction(dir));
-	kmemcheck_mark_initialized(page_address(page) + offset, size);
-	addr = ops->map_page(dev, page, offset, size, dir, NULL);
-	debug_dma_map_page(dev, page, offset, size, dir, addr, false);
-
-	return addr;
-}
-
-static inline void dma_unmap_page(struct device *dev, dma_addr_t addr,
-				  size_t size, enum dma_data_direction dir)
-{
-	struct dma_map_ops *ops = get_dma_ops(dev);
-
-	BUG_ON(!valid_dma_direction(dir));
-	if (ops->unmap_page)
-		ops->unmap_page(dev, addr, size, dir, NULL);
-	debug_dma_unmap_page(dev, addr, size, dir, false);
-}
-
 static inline void
 dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 	enum dma_data_direction dir)
diff --git a/arch/x86/include/asm/iommu.h b/arch/x86/include/asm/iommu.h
index af326a2975b..fd6d21bbee6 100644
--- a/arch/x86/include/asm/iommu.h
+++ b/arch/x86/include/asm/iommu.h
@@ -6,6 +6,7 @@ extern void no_iommu_init(void);
 extern struct dma_map_ops nommu_dma_ops;
 extern int force_iommu, no_iommu;
 extern int iommu_detected;
+extern int iommu_pass_through;
 
 /* 10 seconds */
 #define DMAR_OPERATION_TIMEOUT ((cycles_t) tsc_khz*10*1000)
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 540a466e50f..5cdd8d100ec 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -102,15 +102,39 @@ struct mce_log {
 
 #ifdef __KERNEL__
 
+#include <linux/percpu.h>
+#include <linux/init.h>
+#include <asm/atomic.h>
+
 extern int mce_disabled;
+extern int mce_p5_enabled;
 
-#include <asm/atomic.h>
-#include <linux/percpu.h>
+#ifdef CONFIG_X86_MCE
+void mcheck_init(struct cpuinfo_x86 *c);
+#else
+static inline void mcheck_init(struct cpuinfo_x86 *c) {}
+#endif
+
+#ifdef CONFIG_X86_OLD_MCE
+extern int nr_mce_banks;
+void amd_mcheck_init(struct cpuinfo_x86 *c);
+void intel_p4_mcheck_init(struct cpuinfo_x86 *c);
+void intel_p6_mcheck_init(struct cpuinfo_x86 *c);
+#endif
+
+#ifdef CONFIG_X86_ANCIENT_MCE
+void intel_p5_mcheck_init(struct cpuinfo_x86 *c);
+void winchip_mcheck_init(struct cpuinfo_x86 *c);
+static inline void enable_p5_mce(void) { mce_p5_enabled = 1; }
+#else
+static inline void intel_p5_mcheck_init(struct cpuinfo_x86 *c) {}
+static inline void winchip_mcheck_init(struct cpuinfo_x86 *c) {}
+static inline void enable_p5_mce(void) {}
+#endif
 
 void mce_setup(struct mce *m);
 void mce_log(struct mce *m);
 DECLARE_PER_CPU(struct sys_device, mce_dev);
-extern void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
 
 /*
  * To support more than 128 would need to escape the predefined
@@ -145,12 +169,8 @@ int mce_available(struct cpuinfo_x86 *c);
 DECLARE_PER_CPU(unsigned, mce_exception_count);
 DECLARE_PER_CPU(unsigned, mce_poll_count);
 
-void mce_log_therm_throt_event(__u64 status);
-
 extern atomic_t mce_entry;
 
-void do_machine_check(struct pt_regs *, long);
-
 typedef DECLARE_BITMAP(mce_banks_t, MAX_NR_BANKS);
 DECLARE_PER_CPU(mce_banks_t, mce_poll_banks);
 
@@ -167,13 +187,32 @@ void mce_notify_process(void);
 DECLARE_PER_CPU(struct mce, injectm);
 extern struct file_operations mce_chrdev_ops;
 
-#ifdef CONFIG_X86_MCE
-void mcheck_init(struct cpuinfo_x86 *c);
-#else
-#define mcheck_init(c) do { } while (0)
-#endif
+/*
+ * Exception handler
+ */
+
+/* Call the installed machine check handler for this CPU setup. */
+extern void (*machine_check_vector)(struct pt_regs *, long error_code);
+void do_machine_check(struct pt_regs *, long);
+
+/*
+ * Threshold handler
+ */
 
 extern void (*mce_threshold_vector)(void);
+extern void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
+
+/*
+ * Thermal handler
+ */
+
+void intel_init_thermal(struct cpuinfo_x86 *c);
+
+#ifdef CONFIG_X86_NEW_MCE
+void mce_log_therm_throt_event(__u64 status);
+#else
+static inline void mce_log_therm_throt_event(__u64 status) {}
+#endif
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_X86_MCE_H */
diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
index 22603764e7d..48ad9d29484 100644
--- a/arch/x86/include/asm/msr.h
+++ b/arch/x86/include/asm/msr.h
@@ -3,13 +3,10 @@
 
 #include <asm/msr-index.h>
 
-#ifndef __ASSEMBLY__
-# include <linux/types.h>
-#endif
-
 #ifdef __KERNEL__
 #ifndef __ASSEMBLY__
 
+#include <linux/types.h>
 #include <asm/asm.h>
 #include <asm/errno.h>
 #include <asm/cpumask.h>
@@ -264,6 +261,4 @@ static inline int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
 #endif  /* CONFIG_SMP */
 #endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
-
-
 #endif /* _ASM_X86_MSR_H */
diff --git a/arch/x86/include/asm/page_64_types.h b/arch/x86/include/asm/page_64_types.h
index 8d382d3abf3..7639dbf5d22 100644
--- a/arch/x86/include/asm/page_64_types.h
+++ b/arch/x86/include/asm/page_64_types.h
@@ -41,7 +41,7 @@
 
 /* See Documentation/x86/x86_64/mm.txt for a description of the memory map. */
 #define __PHYSICAL_MASK_SHIFT	46
-#define __VIRTUAL_MASK_SHIFT	48
+#define __VIRTUAL_MASK_SHIFT	47
 
 /*
  * Kernel image size is limited to 512 MB (see level2_kernel_pgt in
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index b51a1e8b0ba..927958d13c1 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -130,6 +130,7 @@ extern void pci_iommu_alloc(void);
 
 /* generic pci stuff */
 #include <asm-generic/pci.h>
+#define PCIBIOS_MAX_MEM_32 0xffffffff
 
 #ifdef CONFIG_NUMA
 /* Returns the node based on pci bus */
diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
index e60fd3e14bd..cb739cc0a08 100644
--- a/arch/x86/include/asm/pci_x86.h
+++ b/arch/x86/include/asm/pci_x86.h
@@ -25,7 +25,7 @@
 #define PCI_BIOS_IRQ_SCAN	0x2000
 #define PCI_ASSIGN_ALL_BUSSES	0x4000
 #define PCI_CAN_SKIP_ISA_ALIGN	0x8000
-#define PCI_USE__CRS		0x10000
+#define PCI_NO_ROOT_CRS		0x10000
 #define PCI_CHECK_ENABLE_AMD_MMCONF	0x20000
 #define PCI_HAS_IO_ECS		0x40000
 #define PCI_NOASSIGN_ROMS	0x80000
diff --git a/arch/x86/include/asm/perf_counter.h b/arch/x86/include/asm/perf_counter.h
index 876ed97147b..5fb33e160ea 100644
--- a/arch/x86/include/asm/perf_counter.h
+++ b/arch/x86/include/asm/perf_counter.h
@@ -84,11 +84,6 @@ union cpuid10_edx {
 #define MSR_ARCH_PERFMON_FIXED_CTR2			0x30b
 #define X86_PMC_IDX_FIXED_BUS_CYCLES			(X86_PMC_IDX_FIXED + 2)
 
-extern void set_perf_counter_pending(void);
-
-#define clear_perf_counter_pending()	do { } while (0)
-#define test_perf_counter_pending()	(0)
-
 #ifdef CONFIG_PERF_COUNTERS
 extern void init_hw_perf_counters(void);
 extern void perf_counters_lapic_init(void);
diff --git a/arch/x86/include/asm/pgtable_32.h b/arch/x86/include/asm/pgtable_32.h
index 31bd120cf2a..01fd9461d32 100644
--- a/arch/x86/include/asm/pgtable_32.h
+++ b/arch/x86/include/asm/pgtable_32.h
@@ -49,13 +49,17 @@ extern void set_pmd_pfn(unsigned long, unsigned long, pgprot_t);
 #endif
 
 #if defined(CONFIG_HIGHPTE)
+#define __KM_PTE			\
+	(in_nmi() ? KM_NMI_PTE : 	\
+	 in_irq() ? KM_IRQ_PTE :	\
+	 KM_PTE0)
 #define pte_offset_map(dir, address)					\
-	((pte_t *)kmap_atomic_pte(pmd_page(*(dir)), KM_PTE0) +		\
+	((pte_t *)kmap_atomic_pte(pmd_page(*(dir)), __KM_PTE) +		\
 	 pte_index((address)))
 #define pte_offset_map_nested(dir, address)				\
 	((pte_t *)kmap_atomic_pte(pmd_page(*(dir)), KM_PTE1) +		\
 	 pte_index((address)))
-#define pte_unmap(pte) kunmap_atomic((pte), KM_PTE0)
+#define pte_unmap(pte) kunmap_atomic((pte), __KM_PTE)
 #define pte_unmap_nested(pte) kunmap_atomic((pte), KM_PTE1)
 #else
 #define pte_offset_map(dir, address)					\
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index abde308fdb0..c57a3011714 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -165,10 +165,7 @@ extern void cleanup_highmap(void);
 
 /* fs/proc/kcore.c */
 #define	kc_vaddr_to_offset(v) ((v) & __VIRTUAL_MASK)
-#define	kc_offset_to_vaddr(o)				\
-	(((o) & (1UL << (__VIRTUAL_MASK_SHIFT - 1)))	\
-	 ? ((o) | ~__VIRTUAL_MASK)			\
-	 : (o))
+#define	kc_offset_to_vaddr(o) ((o) | ~__VIRTUAL_MASK)
 
 #define __HAVE_ARCH_PTE_SAME
 #endif /* !__ASSEMBLY__ */
diff --git a/arch/x86/include/asm/therm_throt.h b/arch/x86/include/asm/therm_throt.h
deleted file mode 100644
index c62349ee786..00000000000
--- a/arch/x86/include/asm/therm_throt.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _ASM_X86_THERM_THROT_H
-#define _ASM_X86_THERM_THROT_H
-
-#include <asm/atomic.h>
-
-extern atomic_t therm_throt_en;
-int therm_throt_process(int curr);
-
-#endif /* _ASM_X86_THERM_THROT_H */
diff --git a/arch/x86/include/asm/timer.h b/arch/x86/include/asm/timer.h
index bd37ed444a2..20ca9c4d468 100644
--- a/arch/x86/include/asm/timer.h
+++ b/arch/x86/include/asm/timer.h
@@ -45,12 +45,16 @@ extern int no_timer_check;
  */
 
 DECLARE_PER_CPU(unsigned long, cyc2ns);
+DECLARE_PER_CPU(unsigned long long, cyc2ns_offset);
 
 #define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
 
 static inline unsigned long long __cycles_2_ns(unsigned long long cyc)
 {
-	return cyc * per_cpu(cyc2ns, smp_processor_id()) >> CYC2NS_SCALE_FACTOR;
+	int cpu = smp_processor_id();
+	unsigned long long ns = per_cpu(cyc2ns_offset, cpu);
+	ns += cyc * per_cpu(cyc2ns, cpu) >> CYC2NS_SCALE_FACTOR;
+	return ns;
 }
 
 static inline unsigned long long cycles_2_ns(unsigned long long cyc)
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index b685ece89d5..20e6a795e16 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -25,7 +25,7 @@
 #define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
 
 #define KERNEL_DS	MAKE_MM_SEG(-1UL)
-#define USER_DS		MAKE_MM_SEG(PAGE_OFFSET)
+#define USER_DS 	MAKE_MM_SEG(TASK_SIZE_MAX)
 
 #define get_ds()	(KERNEL_DS)
 #define get_fs()	(current_thread_info()->addr_limit)
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index f3477bb8456..6c327b852e2 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -24,6 +24,8 @@ CFLAGS_vsyscall_64.o	:= $(PROFILING) -g0 $(nostackp)
 CFLAGS_hpet.o		:= $(nostackp)
 CFLAGS_tsc.o		:= $(nostackp)
 CFLAGS_paravirt.o	:= $(nostackp)
+GCOV_PROFILE_vsyscall_64.o	:= n
+GCOV_PROFILE_hpet.o		:= n
 
 obj-y			:= process_$(BITS).o signal.o entry_$(BITS).o
 obj-y			+= traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
diff --git a/arch/x86/kernel/acpi/realmode/Makefile b/arch/x86/kernel/acpi/realmode/Makefile
index 167bc16ce0e..6a564ac67ef 100644
--- a/arch/x86/kernel/acpi/realmode/Makefile
+++ b/arch/x86/kernel/acpi/realmode/Makefile
@@ -42,6 +42,7 @@ KBUILD_CFLAGS	:= $(LINUXINCLUDE) -g -Os -D_SETUP -D_WAKEUP -D__KERNEL__ \
 		   $(call cc-option, -mpreferred-stack-boundary=2)
 KBUILD_CFLAGS	+= $(call cc-option, -m32)
 KBUILD_AFLAGS	:= $(KBUILD_CFLAGS) -D__ASSEMBLY__
+GCOV_PROFILE := n
 
 WAKEUP_OBJS = $(addprefix $(obj)/,$(wakeup-y))
 
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 1c60554537c..9372f0406ad 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -434,6 +434,16 @@ static void iommu_flush_tlb(struct amd_iommu *iommu, u16 domid)
 	iommu_queue_inv_iommu_pages(iommu, address, domid, 0, 1);
 }
 
+/* Flush the whole IO/TLB for a given protection domain - including PDE */
+static void iommu_flush_tlb_pde(struct amd_iommu *iommu, u16 domid)
+{
+       u64 address = CMD_INV_IOMMU_ALL_PAGES_ADDRESS;
+
+       INC_STATS_COUNTER(domain_flush_single);
+
+       iommu_queue_inv_iommu_pages(iommu, address, domid, 1, 1);
+}
+
 /*
  * This function is used to flush the IO/TLB for a given protection domain
  * on every IOMMU in the system
@@ -1078,7 +1088,13 @@ static void attach_device(struct amd_iommu *iommu,
 	amd_iommu_pd_table[devid] = domain;
 	write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
 
+       /*
+        * We might boot into a crash-kernel here. The crashed kernel
+        * left the caches in the IOMMU dirty. So we have to flush
+        * here to evict all dirty stuff.
+        */
 	iommu_queue_inv_dev_entry(iommu, devid);
+	iommu_flush_tlb_pde(iommu, domain->id);
 }
 
 /*
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index 238989ec077..10b2accd12e 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -260,6 +260,14 @@ static void iommu_enable(struct amd_iommu *iommu)
 
 static void iommu_disable(struct amd_iommu *iommu)
 {
+	/* Disable command buffer */
+	iommu_feature_disable(iommu, CONTROL_CMDBUF_EN);
+
+	/* Disable event logging and event interrupts */
+	iommu_feature_disable(iommu, CONTROL_EVT_INT_EN);
+	iommu_feature_disable(iommu, CONTROL_EVT_LOG_EN);
+
+	/* Disable IOMMU hardware itself */
 	iommu_feature_disable(iommu, CONTROL_IOMMU_EN);
 }
 
@@ -478,6 +486,10 @@ static void iommu_enable_event_buffer(struct amd_iommu *iommu)
 	memcpy_toio(iommu->mmio_base + MMIO_EVT_BUF_OFFSET,
 		    &entry, sizeof(entry));
 
+	/* set head and tail to zero manually */
+	writel(0x00, iommu->mmio_base + MMIO_EVT_HEAD_OFFSET);
+	writel(0x00, iommu->mmio_base + MMIO_EVT_TAIL_OFFSET);
+
 	iommu_feature_enable(iommu, CONTROL_EVT_LOG_EN);
 }
 
@@ -1042,6 +1054,7 @@ static void enable_iommus(void)
 	struct amd_iommu *iommu;
 
 	for_each_iommu(iommu) {
+		iommu_disable(iommu);
 		iommu_set_device_table(iommu);
 		iommu_enable_command_buffer(iommu);
 		iommu_enable_event_buffer(iommu);
@@ -1066,12 +1079,6 @@ static void disable_iommus(void)
 
 static int amd_iommu_resume(struct sys_device *dev)
 {
-	/*
-	 * Disable IOMMUs before reprogramming the hardware registers.
-	 * IOMMU is still enabled from the resume kernel.
-	 */
-	disable_iommus();
-
 	/* re-load the hardware */
 	enable_iommus();
 
@@ -1079,8 +1086,8 @@ static int amd_iommu_resume(struct sys_device *dev)
 	 * we have to flush after the IOMMUs are enabled because a
 	 * disabled IOMMU will never execute the commands we send
 	 */
-	amd_iommu_flush_all_domains();
 	amd_iommu_flush_all_devices();
+	amd_iommu_flush_all_domains();
 
 	return 0;
 }
@@ -1273,6 +1280,11 @@ free:
 	goto out;
 }
 
+void amd_iommu_shutdown(void)
+{
+	disable_iommus();
+}
+
 /****************************************************************************
  *
  * Early detect code. This code runs at IOMMU detection time in the DMA
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index ef8d9290c7e..b7a79207295 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -462,7 +462,8 @@ static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin)
 static void
 __ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
 {
-	union entry_union eu;
+	union entry_union eu = {{0, 0}};
+
 	eu.entry = e;
 	io_apic_write(apic, 0x11 + 2*pin, eu.w2);
 	io_apic_write(apic, 0x10 + 2*pin, eu.w1);
@@ -2003,7 +2004,9 @@ void disable_IO_APIC(void)
 	/*
 	 * Use virtual wire A mode when interrupt remapping is enabled.
 	 */
-	disconnect_bsp_APIC(!intr_remapping_enabled && ioapic_i8259.pin != -1);
+	if (cpu_has_apic)
+		disconnect_bsp_APIC(!intr_remapping_enabled &&
+				ioapic_i8259.pin != -1);
 }
 
 #ifdef CONFIG_X86_32
@@ -3567,7 +3570,7 @@ static int dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
 
 #endif /* CONFIG_SMP */
 
-struct irq_chip dmar_msi_type = {
+static struct irq_chip dmar_msi_type = {
 	.name = "DMAR_MSI",
 	.unmask = dmar_msi_unmask,
 	.mask = dmar_msi_mask,
diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c
index 440a8bccd91..0c0182cc947 100644
--- a/arch/x86/kernel/apic/probe_32.c
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -20,23 +20,12 @@
 #include <asm/apic.h>
 #include <asm/setup.h>
 
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <asm/mpspec.h>
-#include <asm/fixmap.h>
-#include <asm/apicdef.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
 #include <linux/smp.h>
-#include <linux/init.h>
 #include <asm/ipi.h>
 
-#include <linux/smp.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <asm/acpi.h>
 #include <asm/e820.h>
-#include <asm/setup.h>
 
 #ifdef CONFIG_HOTPLUG_CPU
 #define DEFAULT_SEND_IPI	(1)
diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c
index 344eee4ac0a..eafdfbd1ea9 100644
--- a/arch/x86/kernel/apic/summit_32.c
+++ b/arch/x86/kernel/apic/summit_32.c
@@ -44,7 +44,6 @@
 #include <asm/ipi.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
-#include <linux/init.h>
 #include <linux/gfp.h>
 #include <linux/smp.h>
 
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 9fa33886c0d..6b26d4deada 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -108,7 +108,7 @@ DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
 	/* data */
 	[GDT_ENTRY_APMBIOS_BASE+2]	= { { { 0x0000ffff, 0x00409200 } } },
 
-	[GDT_ENTRY_ESPFIX_SS]		= { { { 0x00000000, 0x00c09200 } } },
+	[GDT_ENTRY_ESPFIX_SS]		= { { { 0x0000ffff, 0x00cf9200 } } },
 	[GDT_ENTRY_PERCPU]		= { { { 0x0000ffff, 0x00cf9200 } } },
 	GDT_STACK_CANARY_INIT
 #endif
@@ -848,6 +848,9 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 #if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
 	numa_add_cpu(smp_processor_id());
 #endif
+
+	/* Cap the iomem address space to what is addressable on all CPUs */
+	iomem_resource.end &= (1ULL << c->x86_phys_bits) - 1;
 }
 
 #ifdef CONFIG_X86_64
diff --git a/arch/x86/kernel/cpu/mcheck/Makefile b/arch/x86/kernel/cpu/mcheck/Makefile
index 45004faf67e..188a1ca5ad2 100644
--- a/arch/x86/kernel/cpu/mcheck/Makefile
+++ b/arch/x86/kernel/cpu/mcheck/Makefile
@@ -1,11 +1,12 @@
-obj-y				=  mce.o therm_throt.o
+obj-y				=  mce.o
 
 obj-$(CONFIG_X86_NEW_MCE)	+= mce-severity.o
 obj-$(CONFIG_X86_OLD_MCE)	+= k7.o p4.o p6.o
 obj-$(CONFIG_X86_ANCIENT_MCE)	+= winchip.o p5.o
-obj-$(CONFIG_X86_MCE_P4THERMAL)	+= mce_intel.o
-obj-$(CONFIG_X86_MCE_INTEL)	+= mce_intel_64.o mce_intel.o
-obj-$(CONFIG_X86_MCE_AMD)	+= mce_amd_64.o
+obj-$(CONFIG_X86_MCE_INTEL)	+= mce_intel.o
+obj-$(CONFIG_X86_MCE_AMD)	+= mce_amd.o
 obj-$(CONFIG_X86_MCE_NONFATAL)	+= non-fatal.o
 obj-$(CONFIG_X86_MCE_THRESHOLD) += threshold.o
 obj-$(CONFIG_X86_MCE_INJECT)	+= mce-inject.o
+
+obj-$(CONFIG_X86_THERMAL_VECTOR) += therm_throt.o
diff --git a/arch/x86/kernel/cpu/mcheck/k7.c b/arch/x86/kernel/cpu/mcheck/k7.c
index 89e51042415..b945d5dbc60 100644
--- a/arch/x86/kernel/cpu/mcheck/k7.c
+++ b/arch/x86/kernel/cpu/mcheck/k7.c
@@ -10,10 +10,9 @@
 
 #include <asm/processor.h>
 #include <asm/system.h>
+#include <asm/mce.h>
 #include <asm/msr.h>
 
-#include "mce.h"
-
 /* Machine Check Handler For AMD Athlon/Duron: */
 static void k7_machine_check(struct pt_regs *regs, long error_code)
 {
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index fabba15e455..284d1de968b 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -44,7 +44,6 @@
 #include <asm/msr.h>
 
 #include "mce-internal.h"
-#include "mce.h"
 
 /* Handle unconfigured int18 (should never happen) */
 static void unexpected_machine_check(struct pt_regs *regs, long error_code)
@@ -57,7 +56,7 @@ static void unexpected_machine_check(struct pt_regs *regs, long error_code)
 void (*machine_check_vector)(struct pt_regs *, long error_code) =
 						unexpected_machine_check;
 
-int				mce_disabled;
+int mce_disabled __read_mostly;
 
 #ifdef CONFIG_X86_NEW_MCE
 
@@ -76,21 +75,22 @@ DEFINE_PER_CPU(unsigned, mce_exception_count);
  *   2: SIGBUS or log uncorrected errors (if possible), log corrected errors
  *   3: never panic or SIGBUS, log all errors (for testing only)
  */
-static int			tolerant = 1;
-static int			banks;
-static u64			*bank;
-static unsigned long		notify_user;
-static int			rip_msr;
-static int			mce_bootlog = -1;
-static int			monarch_timeout = -1;
-static int			mce_panic_timeout;
-static int			mce_dont_log_ce;
-int				mce_cmci_disabled;
-int				mce_ignore_ce;
-int				mce_ser;
-
-static char			trigger[128];
-static char			*trigger_argv[2] = { trigger, NULL };
+static int			tolerant		__read_mostly = 1;
+static int			banks			__read_mostly;
+static u64			*bank			__read_mostly;
+static int			rip_msr			__read_mostly;
+static int			mce_bootlog		__read_mostly = -1;
+static int			monarch_timeout		__read_mostly = -1;
+static int			mce_panic_timeout	__read_mostly;
+static int			mce_dont_log_ce		__read_mostly;
+int				mce_cmci_disabled	__read_mostly;
+int				mce_ignore_ce		__read_mostly;
+int				mce_ser			__read_mostly;
+
+/* User mode helper program triggered by machine check event */
+static unsigned long		mce_need_notify;
+static char			mce_helper[128];
+static char			*mce_helper_argv[2] = { mce_helper, NULL };
 
 static unsigned long		dont_init_banks;
 
@@ -180,7 +180,7 @@ void mce_log(struct mce *mce)
 	wmb();
 
 	mce->finished = 1;
-	set_bit(0, &notify_user);
+	set_bit(0, &mce_need_notify);
 }
 
 static void print_mce(struct mce *m)
@@ -691,18 +691,21 @@ static atomic_t global_nwo;
  * in the entry order.
  * TBD double check parallel CPU hotunplug
  */
-static int mce_start(int no_way_out, int *order)
+static int mce_start(int *no_way_out)
 {
-	int nwo;
+	int order;
 	int cpus = num_online_cpus();
 	u64 timeout = (u64)monarch_timeout * NSEC_PER_USEC;
 
-	if (!timeout) {
-		*order = -1;
-		return no_way_out;
-	}
+	if (!timeout)
+		return -1;
 
-	atomic_add(no_way_out, &global_nwo);
+	atomic_add(*no_way_out, &global_nwo);
+	/*
+	 * global_nwo should be updated before mce_callin
+	 */
+	smp_wmb();
+	order = atomic_add_return(1, &mce_callin);
 
 	/*
 	 * Wait for everyone.
@@ -710,40 +713,43 @@ static int mce_start(int no_way_out, int *order)
 	while (atomic_read(&mce_callin) != cpus) {
 		if (mce_timed_out(&timeout)) {
 			atomic_set(&global_nwo, 0);
-			*order = -1;
-			return no_way_out;
+			return -1;
 		}
 		ndelay(SPINUNIT);
 	}
 
 	/*
-	 * Cache the global no_way_out state.
+	 * mce_callin should be read before global_nwo
 	 */
-	nwo = atomic_read(&global_nwo);
+	smp_rmb();
 
-	/*
-	 * Monarch starts executing now, the others wait.
-	 */
-	if (*order == 1) {
+	if (order == 1) {
+		/*
+		 * Monarch: Starts executing now, the others wait.
+		 */
 		atomic_set(&mce_executing, 1);
-		return nwo;
+	} else {
+		/*
+		 * Subject: Now start the scanning loop one by one in
+		 * the original callin order.
+		 * This way when there are any shared banks it will be
+		 * only seen by one CPU before cleared, avoiding duplicates.
+		 */
+		while (atomic_read(&mce_executing) < order) {
+			if (mce_timed_out(&timeout)) {
+				atomic_set(&global_nwo, 0);
+				return -1;
+			}
+			ndelay(SPINUNIT);
+		}
 	}
 
 	/*
-	 * Now start the scanning loop one by one
-	 * in the original callin order.
-	 * This way when there are any shared banks it will
-	 * be only seen by one CPU before cleared, avoiding duplicates.
+	 * Cache the global no_way_out state.
 	 */
-	while (atomic_read(&mce_executing) < *order) {
-		if (mce_timed_out(&timeout)) {
-			atomic_set(&global_nwo, 0);
-			*order = -1;
-			return no_way_out;
-		}
-		ndelay(SPINUNIT);
-	}
-	return nwo;
+	*no_way_out = atomic_read(&global_nwo);
+
+	return order;
 }
 
 /*
@@ -863,7 +869,6 @@ void do_machine_check(struct pt_regs *regs, long error_code)
 	 * check handler.
 	 */
 	int order;
-
 	/*
 	 * If no_way_out gets set, there is no safe way to recover from this
 	 * MCE.  If tolerant is cranked up, we'll try anyway.
@@ -887,7 +892,6 @@ void do_machine_check(struct pt_regs *regs, long error_code)
 	if (!banks)
 		goto out;
 
-	order = atomic_add_return(1, &mce_callin);
 	mce_setup(&m);
 
 	m.mcgstatus = mce_rdmsrl(MSR_IA32_MCG_STATUS);
@@ -909,7 +913,7 @@ void do_machine_check(struct pt_regs *regs, long error_code)
 	 * This way we don't report duplicated events on shared banks
 	 * because the first one to see it will clear it.
 	 */
-	no_way_out = mce_start(no_way_out, &order);
+	order = mce_start(&no_way_out);
 	for (i = 0; i < banks; i++) {
 		__clear_bit(i, toclear);
 		if (!bank[i])
@@ -1118,7 +1122,7 @@ static void mcheck_timer(unsigned long data)
 
 static void mce_do_trigger(struct work_struct *work)
 {
-	call_usermodehelper(trigger, trigger_argv, NULL, UMH_NO_WAIT);
+	call_usermodehelper(mce_helper, mce_helper_argv, NULL, UMH_NO_WAIT);
 }
 
 static DECLARE_WORK(mce_trigger_work, mce_do_trigger);
@@ -1135,7 +1139,7 @@ int mce_notify_irq(void)
 
 	clear_thread_flag(TIF_MCE_NOTIFY);
 
-	if (test_and_clear_bit(0, &notify_user)) {
+	if (test_and_clear_bit(0, &mce_need_notify)) {
 		wake_up_interruptible(&mce_wait);
 
 		/*
@@ -1143,7 +1147,7 @@ int mce_notify_irq(void)
 		 * work_pending is always cleared before the function is
 		 * executed.
 		 */
-		if (trigger[0] && !work_pending(&mce_trigger_work))
+		if (mce_helper[0] && !work_pending(&mce_trigger_work))
 			schedule_work(&mce_trigger_work);
 
 		if (__ratelimit(&ratelimit))
@@ -1245,7 +1249,7 @@ static void mce_cpu_quirks(struct cpuinfo_x86 *c)
 		 * Various K7s with broken bank 0 around. Always disable
 		 * by default.
 		 */
-		 if (c->x86 == 6)
+		 if (c->x86 == 6 && banks > 0)
 			bank[0] = 0;
 	}
 
@@ -1282,8 +1286,7 @@ static void __cpuinit mce_ancient_init(struct cpuinfo_x86 *c)
 		return;
 	switch (c->x86_vendor) {
 	case X86_VENDOR_INTEL:
-		if (mce_p5_enabled())
-			intel_p5_mcheck_init(c);
+		intel_p5_mcheck_init(c);
 		break;
 	case X86_VENDOR_CENTAUR:
 		winchip_mcheck_init(c);
@@ -1609,8 +1612,9 @@ static int mce_resume(struct sys_device *dev)
 static void mce_cpu_restart(void *data)
 {
 	del_timer_sync(&__get_cpu_var(mce_timer));
-	if (mce_available(&current_cpu_data))
-		mce_init();
+	if (!mce_available(&current_cpu_data))
+		return;
+	mce_init();
 	mce_init_timer();
 }
 
@@ -1620,6 +1624,26 @@ static void mce_restart(void)
 	on_each_cpu(mce_cpu_restart, NULL, 1);
 }
 
+/* Toggle features for corrected errors */
+static void mce_disable_ce(void *all)
+{
+	if (!mce_available(&current_cpu_data))
+		return;
+	if (all)
+		del_timer_sync(&__get_cpu_var(mce_timer));
+	cmci_clear();
+}
+
+static void mce_enable_ce(void *all)
+{
+	if (!mce_available(&current_cpu_data))
+		return;
+	cmci_reenable();
+	cmci_recheck();
+	if (all)
+		mce_init_timer();
+}
+
 static struct sysdev_class mce_sysclass = {
 	.suspend	= mce_suspend,
 	.shutdown	= mce_shutdown,
@@ -1659,9 +1683,9 @@ static ssize_t set_bank(struct sys_device *s, struct sysdev_attribute *attr,
 static ssize_t
 show_trigger(struct sys_device *s, struct sysdev_attribute *attr, char *buf)
 {
-	strcpy(buf, trigger);
+	strcpy(buf, mce_helper);
 	strcat(buf, "\n");
-	return strlen(trigger) + 1;
+	return strlen(mce_helper) + 1;
 }
 
 static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr,
@@ -1670,10 +1694,10 @@ static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr,
 	char *p;
 	int len;
 
-	strncpy(trigger, buf, sizeof(trigger));
-	trigger[sizeof(trigger)-1] = 0;
-	len = strlen(trigger);
-	p = strchr(trigger, '\n');
+	strncpy(mce_helper, buf, sizeof(mce_helper));
+	mce_helper[sizeof(mce_helper)-1] = 0;
+	len = strlen(mce_helper);
+	p = strchr(mce_helper, '\n');
 
 	if (*p)
 		*p = 0;
@@ -1681,6 +1705,52 @@ static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr,
 	return len;
 }
 
+static ssize_t set_ignore_ce(struct sys_device *s,
+			     struct sysdev_attribute *attr,
+			     const char *buf, size_t size)
+{
+	u64 new;
+
+	if (strict_strtoull(buf, 0, &new) < 0)
+		return -EINVAL;
+
+	if (mce_ignore_ce ^ !!new) {
+		if (new) {
+			/* disable ce features */
+			on_each_cpu(mce_disable_ce, (void *)1, 1);
+			mce_ignore_ce = 1;
+		} else {
+			/* enable ce features */
+			mce_ignore_ce = 0;
+			on_each_cpu(mce_enable_ce, (void *)1, 1);
+		}
+	}
+	return size;
+}
+
+static ssize_t set_cmci_disabled(struct sys_device *s,
+				 struct sysdev_attribute *attr,
+				 const char *buf, size_t size)
+{
+	u64 new;
+
+	if (strict_strtoull(buf, 0, &new) < 0)
+		return -EINVAL;
+
+	if (mce_cmci_disabled ^ !!new) {
+		if (new) {
+			/* disable cmci */
+			on_each_cpu(mce_disable_ce, NULL, 1);
+			mce_cmci_disabled = 1;
+		} else {
+			/* enable cmci */
+			mce_cmci_disabled = 0;
+			on_each_cpu(mce_enable_ce, NULL, 1);
+		}
+	}
+	return size;
+}
+
 static ssize_t store_int_with_restart(struct sys_device *s,
 				      struct sysdev_attribute *attr,
 				      const char *buf, size_t size)
@@ -1693,6 +1763,7 @@ static ssize_t store_int_with_restart(struct sys_device *s,
 static SYSDEV_ATTR(trigger, 0644, show_trigger, set_trigger);
 static SYSDEV_INT_ATTR(tolerant, 0644, tolerant);
 static SYSDEV_INT_ATTR(monarch_timeout, 0644, monarch_timeout);
+static SYSDEV_INT_ATTR(dont_log_ce, 0644, mce_dont_log_ce);
 
 static struct sysdev_ext_attribute attr_check_interval = {
 	_SYSDEV_ATTR(check_interval, 0644, sysdev_show_int,
@@ -1700,9 +1771,24 @@ static struct sysdev_ext_attribute attr_check_interval = {
 	&check_interval
 };
 
+static struct sysdev_ext_attribute attr_ignore_ce = {
+	_SYSDEV_ATTR(ignore_ce, 0644, sysdev_show_int, set_ignore_ce),
+	&mce_ignore_ce
+};
+
+static struct sysdev_ext_attribute attr_cmci_disabled = {
+	_SYSDEV_ATTR(cmci_disabled, 0644, sysdev_show_int, set_cmci_disabled),
+	&mce_cmci_disabled
+};
+
 static struct sysdev_attribute *mce_attrs[] = {
-	&attr_tolerant.attr, &attr_check_interval.attr, &attr_trigger,
+	&attr_tolerant.attr,
+	&attr_check_interval.attr,
+	&attr_trigger,
 	&attr_monarch_timeout.attr,
+	&attr_dont_log_ce.attr,
+	&attr_ignore_ce.attr,
+	&attr_cmci_disabled.attr,
 	NULL
 };
 
@@ -1712,7 +1798,7 @@ static cpumask_var_t mce_dev_initialized;
 static __cpuinit int mce_create_device(unsigned int cpu)
 {
 	int err;
-	int i;
+	int i, j;
 
 	if (!mce_available(&boot_cpu_data))
 		return -EIO;
@@ -1730,9 +1816,9 @@ static __cpuinit int mce_create_device(unsigned int cpu)
 		if (err)
 			goto error;
 	}
-	for (i = 0; i < banks; i++) {
+	for (j = 0; j < banks; j++) {
 		err = sysdev_create_file(&per_cpu(mce_dev, cpu),
-					&bank_attrs[i]);
+					&bank_attrs[j]);
 		if (err)
 			goto error2;
 	}
@@ -1740,8 +1826,8 @@ static __cpuinit int mce_create_device(unsigned int cpu)
 
 	return 0;
 error2:
-	while (--i >= 0)
-		sysdev_remove_file(&per_cpu(mce_dev, cpu), &bank_attrs[i]);
+	while (--j >= 0)
+		sysdev_remove_file(&per_cpu(mce_dev, cpu), &bank_attrs[j]);
 error:
 	while (--i >= 0)
 		sysdev_remove_file(&per_cpu(mce_dev, cpu), mce_attrs[i]);
@@ -1883,7 +1969,7 @@ static __init int mce_init_device(void)
 	if (!mce_available(&boot_cpu_data))
 		return -EIO;
 
-	alloc_cpumask_var(&mce_dev_initialized, GFP_KERNEL);
+	zalloc_cpumask_var(&mce_dev_initialized, GFP_KERNEL);
 
 	err = mce_init_banks();
 	if (err)
@@ -1915,7 +2001,7 @@ EXPORT_SYMBOL_GPL(nr_mce_banks);	/* non-fatal.o */
 /* This has to be run for each processor */
 void mcheck_init(struct cpuinfo_x86 *c)
 {
-	if (mce_disabled == 1)
+	if (mce_disabled)
 		return;
 
 	switch (c->x86_vendor) {
@@ -1945,10 +2031,9 @@ void mcheck_init(struct cpuinfo_x86 *c)
 
 static int __init mcheck_enable(char *str)
 {
-	mce_disabled = -1;
+	mce_p5_enabled = 1;
 	return 1;
 }
-
 __setup("mce", mcheck_enable);
 
 #endif /* CONFIG_X86_OLD_MCE */
diff --git a/arch/x86/kernel/cpu/mcheck/mce.h b/arch/x86/kernel/cpu/mcheck/mce.h
deleted file mode 100644
index 84a552b458c..00000000000
--- a/arch/x86/kernel/cpu/mcheck/mce.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#include <linux/init.h>
-#include <asm/mce.h>
-
-#ifdef CONFIG_X86_OLD_MCE
-void amd_mcheck_init(struct cpuinfo_x86 *c);
-void intel_p4_mcheck_init(struct cpuinfo_x86 *c);
-void intel_p6_mcheck_init(struct cpuinfo_x86 *c);
-#endif
-
-#ifdef CONFIG_X86_ANCIENT_MCE
-void intel_p5_mcheck_init(struct cpuinfo_x86 *c);
-void winchip_mcheck_init(struct cpuinfo_x86 *c);
-extern int mce_p5_enable;
-static inline int mce_p5_enabled(void) { return mce_p5_enable; }
-static inline void enable_p5_mce(void) { mce_p5_enable = 1; }
-#else
-static inline void intel_p5_mcheck_init(struct cpuinfo_x86 *c) {}
-static inline void winchip_mcheck_init(struct cpuinfo_x86 *c) {}
-static inline int mce_p5_enabled(void) { return 0; }
-static inline void enable_p5_mce(void) { }
-#endif
-
-/* Call the installed machine check handler for this CPU setup. */
-extern void (*machine_check_vector)(struct pt_regs *, long error_code);
-
-#ifdef CONFIG_X86_OLD_MCE
-
-extern int nr_mce_banks;
-
-void intel_set_thermal_handler(void);
-
-#else
-
-static inline void intel_set_thermal_handler(void) { }
-
-#endif
-
-void intel_init_thermal(struct cpuinfo_x86 *c);
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index ddae21620bd..ddae21620bd 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c
index 2b011d2d857..e1acec0f7a3 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c
@@ -1,74 +1,226 @@
 /*
- * Common code for Intel machine checks
+ * Intel specific MCE features.
+ * Copyright 2004 Zwane Mwaikambo <zwane@linuxpower.ca>
+ * Copyright (C) 2008, 2009 Intel Corporation
+ * Author: Andi Kleen
  */
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/smp.h>
 
-#include <asm/therm_throt.h>
-#include <asm/processor.h>
-#include <asm/system.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
 #include <asm/apic.h>
+#include <asm/processor.h>
 #include <asm/msr.h>
+#include <asm/mce.h>
+
+/*
+ * Support for Intel Correct Machine Check Interrupts. This allows
+ * the CPU to raise an interrupt when a corrected machine check happened.
+ * Normally we pick those up using a regular polling timer.
+ * Also supports reliable discovery of shared banks.
+ */
 
-#include "mce.h"
+static DEFINE_PER_CPU(mce_banks_t, mce_banks_owned);
 
-void intel_init_thermal(struct cpuinfo_x86 *c)
+/*
+ * cmci_discover_lock protects against parallel discovery attempts
+ * which could race against each other.
+ */
+static DEFINE_SPINLOCK(cmci_discover_lock);
+
+#define CMCI_THRESHOLD 1
+
+static int cmci_supported(int *banks)
 {
-	unsigned int cpu = smp_processor_id();
-	int tm2 = 0;
-	u32 l, h;
+	u64 cap;
 
-	/* Thermal monitoring depends on ACPI and clock modulation*/
-	if (!cpu_has(c, X86_FEATURE_ACPI) || !cpu_has(c, X86_FEATURE_ACC))
-		return;
+	if (mce_cmci_disabled || mce_ignore_ce)
+		return 0;
 
 	/*
-	 * First check if its enabled already, in which case there might
-	 * be some SMM goo which handles it, so we can't even put a handler
-	 * since it might be delivered via SMI already:
+	 * Vendor check is not strictly needed, but the initial
+	 * initialization is vendor keyed and this
+	 * makes sure none of the backdoors are entered otherwise.
 	 */
-	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
-	h = apic_read(APIC_LVTTHMR);
-	if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
-		printk(KERN_DEBUG
-		       "CPU%d: Thermal monitoring handled by SMI\n", cpu);
-		return;
+	if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
+		return 0;
+	if (!cpu_has_apic || lapic_get_maxlvt() < 6)
+		return 0;
+	rdmsrl(MSR_IA32_MCG_CAP, cap);
+	*banks = min_t(unsigned, MAX_NR_BANKS, cap & 0xff);
+	return !!(cap & MCG_CMCI_P);
+}
+
+/*
+ * The interrupt handler. This is called on every event.
+ * Just call the poller directly to log any events.
+ * This could in theory increase the threshold under high load,
+ * but doesn't for now.
+ */
+static void intel_threshold_interrupt(void)
+{
+	machine_check_poll(MCP_TIMESTAMP, &__get_cpu_var(mce_banks_owned));
+	mce_notify_irq();
+}
+
+static void print_update(char *type, int *hdr, int num)
+{
+	if (*hdr == 0)
+		printk(KERN_INFO "CPU %d MCA banks", smp_processor_id());
+	*hdr = 1;
+	printk(KERN_CONT " %s:%d", type, num);
+}
+
+/*
+ * Enable CMCI (Corrected Machine Check Interrupt) for available MCE banks
+ * on this CPU. Use the algorithm recommended in the SDM to discover shared
+ * banks.
+ */
+static void cmci_discover(int banks, int boot)
+{
+	unsigned long *owned = (void *)&__get_cpu_var(mce_banks_owned);
+	unsigned long flags;
+	int hdr = 0;
+	int i;
+
+	spin_lock_irqsave(&cmci_discover_lock, flags);
+	for (i = 0; i < banks; i++) {
+		u64 val;
+
+		if (test_bit(i, owned))
+			continue;
+
+		rdmsrl(MSR_IA32_MC0_CTL2 + i, val);
+
+		/* Already owned by someone else? */
+		if (val & CMCI_EN) {
+			if (test_and_clear_bit(i, owned) || boot)
+				print_update("SHD", &hdr, i);
+			__clear_bit(i, __get_cpu_var(mce_poll_banks));
+			continue;
+		}
+
+		val |= CMCI_EN | CMCI_THRESHOLD;
+		wrmsrl(MSR_IA32_MC0_CTL2 + i, val);
+		rdmsrl(MSR_IA32_MC0_CTL2 + i, val);
+
+		/* Did the enable bit stick? -- the bank supports CMCI */
+		if (val & CMCI_EN) {
+			if (!test_and_set_bit(i, owned) || boot)
+				print_update("CMCI", &hdr, i);
+			__clear_bit(i, __get_cpu_var(mce_poll_banks));
+		} else {
+			WARN_ON(!test_bit(i, __get_cpu_var(mce_poll_banks)));
+		}
 	}
+	spin_unlock_irqrestore(&cmci_discover_lock, flags);
+	if (hdr)
+		printk(KERN_CONT "\n");
+}
+
+/*
+ * Just in case we missed an event during initialization check
+ * all the CMCI owned banks.
+ */
+void cmci_recheck(void)
+{
+	unsigned long flags;
+	int banks;
+
+	if (!mce_available(&current_cpu_data) || !cmci_supported(&banks))
+		return;
+	local_irq_save(flags);
+	machine_check_poll(MCP_TIMESTAMP, &__get_cpu_var(mce_banks_owned));
+	local_irq_restore(flags);
+}
 
-	if (cpu_has(c, X86_FEATURE_TM2) && (l & MSR_IA32_MISC_ENABLE_TM2))
-		tm2 = 1;
+/*
+ * Disable CMCI on this CPU for all banks it owns when it goes down.
+ * This allows other CPUs to claim the banks on rediscovery.
+ */
+void cmci_clear(void)
+{
+	unsigned long flags;
+	int i;
+	int banks;
+	u64 val;
 
-	/* Check whether a vector already exists */
-	if (h & APIC_VECTOR_MASK) {
-		printk(KERN_DEBUG
-		       "CPU%d: Thermal LVT vector (%#x) already installed\n",
-		       cpu, (h & APIC_VECTOR_MASK));
+	if (!cmci_supported(&banks))
 		return;
+	spin_lock_irqsave(&cmci_discover_lock, flags);
+	for (i = 0; i < banks; i++) {
+		if (!test_bit(i, __get_cpu_var(mce_banks_owned)))
+			continue;
+		/* Disable CMCI */
+		rdmsrl(MSR_IA32_MC0_CTL2 + i, val);
+		val &= ~(CMCI_EN|CMCI_THRESHOLD_MASK);
+		wrmsrl(MSR_IA32_MC0_CTL2 + i, val);
+		__clear_bit(i, __get_cpu_var(mce_banks_owned));
 	}
+	spin_unlock_irqrestore(&cmci_discover_lock, flags);
+}
+
+/*
+ * After a CPU went down cycle through all the others and rediscover
+ * Must run in process context.
+ */
+void cmci_rediscover(int dying)
+{
+	int banks;
+	int cpu;
+	cpumask_var_t old;
+
+	if (!cmci_supported(&banks))
+		return;
+	if (!alloc_cpumask_var(&old, GFP_KERNEL))
+		return;
+	cpumask_copy(old, &current->cpus_allowed);
 
-	/* We'll mask the thermal vector in the lapic till we're ready: */
-	h = THERMAL_APIC_VECTOR | APIC_DM_FIXED | APIC_LVT_MASKED;
-	apic_write(APIC_LVTTHMR, h);
+	for_each_online_cpu(cpu) {
+		if (cpu == dying)
+			continue;
+		if (set_cpus_allowed_ptr(current, cpumask_of(cpu)))
+			continue;
+		/* Recheck banks in case CPUs don't all have the same */
+		if (cmci_supported(&banks))
+			cmci_discover(banks, 0);
+	}
 
-	rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
-	wrmsr(MSR_IA32_THERM_INTERRUPT,
-		l | (THERM_INT_LOW_ENABLE | THERM_INT_HIGH_ENABLE), h);
+	set_cpus_allowed_ptr(current, old);
+	free_cpumask_var(old);
+}
 
-	intel_set_thermal_handler();
+/*
+ * Reenable CMCI on this CPU in case a CPU down failed.
+ */
+void cmci_reenable(void)
+{
+	int banks;
+	if (cmci_supported(&banks))
+		cmci_discover(banks, 0);
+}
 
-	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
-	wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h);
+static void intel_init_cmci(void)
+{
+	int banks;
 
-	/* Unmask the thermal vector: */
-	l = apic_read(APIC_LVTTHMR);
-	apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
+	if (!cmci_supported(&banks))
+		return;
 
-	printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n",
-	       cpu, tm2 ? "TM2" : "TM1");
+	mce_threshold_vector = intel_threshold_interrupt;
+	cmci_discover(banks, 1);
+	/*
+	 * For CPU #0 this runs with still disabled APIC, but that's
+	 * ok because only the vector is set up. We still do another
+	 * check for the banks later for CPU #0 just to make sure
+	 * to not miss any events.
+	 */
+	apic_write(APIC_LVTCMCI, THRESHOLD_APIC_VECTOR|APIC_DM_FIXED);
+	cmci_recheck();
+}
 
-	/* enable thermal throttle processing */
-	atomic_set(&therm_throt_en, 1);
+void mce_intel_feature_init(struct cpuinfo_x86 *c)
+{
+	intel_init_thermal(c);
+	intel_init_cmci();
 }
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
deleted file mode 100644
index f2ef6952c40..00000000000
--- a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- * Intel specific MCE features.
- * Copyright 2004 Zwane Mwaikambo <zwane@linuxpower.ca>
- * Copyright (C) 2008, 2009 Intel Corporation
- * Author: Andi Kleen
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/percpu.h>
-#include <asm/processor.h>
-#include <asm/apic.h>
-#include <asm/msr.h>
-#include <asm/mce.h>
-#include <asm/hw_irq.h>
-#include <asm/idle.h>
-#include <asm/therm_throt.h>
-
-#include "mce.h"
-
-asmlinkage void smp_thermal_interrupt(void)
-{
-	__u64 msr_val;
-
-	ack_APIC_irq();
-
-	exit_idle();
-	irq_enter();
-
-	rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
-	if (therm_throt_process(msr_val & THERM_STATUS_PROCHOT))
-		mce_log_therm_throt_event(msr_val);
-
-	inc_irq_stat(irq_thermal_count);
-	irq_exit();
-}
-
-/*
- * Support for Intel Correct Machine Check Interrupts. This allows
- * the CPU to raise an interrupt when a corrected machine check happened.
- * Normally we pick those up using a regular polling timer.
- * Also supports reliable discovery of shared banks.
- */
-
-static DEFINE_PER_CPU(mce_banks_t, mce_banks_owned);
-
-/*
- * cmci_discover_lock protects against parallel discovery attempts
- * which could race against each other.
- */
-static DEFINE_SPINLOCK(cmci_discover_lock);
-
-#define CMCI_THRESHOLD 1
-
-static int cmci_supported(int *banks)
-{
-	u64 cap;
-
-	if (mce_cmci_disabled || mce_ignore_ce)
-		return 0;
-
-	/*
-	 * Vendor check is not strictly needed, but the initial
-	 * initialization is vendor keyed and this
-	 * makes sure none of the backdoors are entered otherwise.
-	 */
-	if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
-		return 0;
-	if (!cpu_has_apic || lapic_get_maxlvt() < 6)
-		return 0;
-	rdmsrl(MSR_IA32_MCG_CAP, cap);
-	*banks = min_t(unsigned, MAX_NR_BANKS, cap & 0xff);
-	return !!(cap & MCG_CMCI_P);
-}
-
-/*
- * The interrupt handler. This is called on every event.
- * Just call the poller directly to log any events.
- * This could in theory increase the threshold under high load,
- * but doesn't for now.
- */
-static void intel_threshold_interrupt(void)
-{
-	machine_check_poll(MCP_TIMESTAMP, &__get_cpu_var(mce_banks_owned));
-	mce_notify_irq();
-}
-
-static void print_update(char *type, int *hdr, int num)
-{
-	if (*hdr == 0)
-		printk(KERN_INFO "CPU %d MCA banks", smp_processor_id());
-	*hdr = 1;
-	printk(KERN_CONT " %s:%d", type, num);
-}
-
-/*
- * Enable CMCI (Corrected Machine Check Interrupt) for available MCE banks
- * on this CPU. Use the algorithm recommended in the SDM to discover shared
- * banks.
- */
-static void cmci_discover(int banks, int boot)
-{
-	unsigned long *owned = (void *)&__get_cpu_var(mce_banks_owned);
-	unsigned long flags;
-	int hdr = 0;
-	int i;
-
-	spin_lock_irqsave(&cmci_discover_lock, flags);
-	for (i = 0; i < banks; i++) {
-		u64 val;
-
-		if (test_bit(i, owned))
-			continue;
-
-		rdmsrl(MSR_IA32_MC0_CTL2 + i, val);
-
-		/* Already owned by someone else? */
-		if (val & CMCI_EN) {
-			if (test_and_clear_bit(i, owned) || boot)
-				print_update("SHD", &hdr, i);
-			__clear_bit(i, __get_cpu_var(mce_poll_banks));
-			continue;
-		}
-
-		val |= CMCI_EN | CMCI_THRESHOLD;
-		wrmsrl(MSR_IA32_MC0_CTL2 + i, val);
-		rdmsrl(MSR_IA32_MC0_CTL2 + i, val);
-
-		/* Did the enable bit stick? -- the bank supports CMCI */
-		if (val & CMCI_EN) {
-			if (!test_and_set_bit(i, owned) || boot)
-				print_update("CMCI", &hdr, i);
-			__clear_bit(i, __get_cpu_var(mce_poll_banks));
-		} else {
-			WARN_ON(!test_bit(i, __get_cpu_var(mce_poll_banks)));
-		}
-	}
-	spin_unlock_irqrestore(&cmci_discover_lock, flags);
-	if (hdr)
-		printk(KERN_CONT "\n");
-}
-
-/*
- * Just in case we missed an event during initialization check
- * all the CMCI owned banks.
- */
-void cmci_recheck(void)
-{
-	unsigned long flags;
-	int banks;
-
-	if (!mce_available(&current_cpu_data) || !cmci_supported(&banks))
-		return;
-	local_irq_save(flags);
-	machine_check_poll(MCP_TIMESTAMP, &__get_cpu_var(mce_banks_owned));
-	local_irq_restore(flags);
-}
-
-/*
- * Disable CMCI on this CPU for all banks it owns when it goes down.
- * This allows other CPUs to claim the banks on rediscovery.
- */
-void cmci_clear(void)
-{
-	unsigned long flags;
-	int i;
-	int banks;
-	u64 val;
-
-	if (!cmci_supported(&banks))
-		return;
-	spin_lock_irqsave(&cmci_discover_lock, flags);
-	for (i = 0; i < banks; i++) {
-		if (!test_bit(i, __get_cpu_var(mce_banks_owned)))
-			continue;
-		/* Disable CMCI */
-		rdmsrl(MSR_IA32_MC0_CTL2 + i, val);
-		val &= ~(CMCI_EN|CMCI_THRESHOLD_MASK);
-		wrmsrl(MSR_IA32_MC0_CTL2 + i, val);
-		__clear_bit(i, __get_cpu_var(mce_banks_owned));
-	}
-	spin_unlock_irqrestore(&cmci_discover_lock, flags);
-}
-
-/*
- * After a CPU went down cycle through all the others and rediscover
- * Must run in process context.
- */
-void cmci_rediscover(int dying)
-{
-	int banks;
-	int cpu;
-	cpumask_var_t old;
-
-	if (!cmci_supported(&banks))
-		return;
-	if (!alloc_cpumask_var(&old, GFP_KERNEL))
-		return;
-	cpumask_copy(old, &current->cpus_allowed);
-
-	for_each_online_cpu(cpu) {
-		if (cpu == dying)
-			continue;
-		if (set_cpus_allowed_ptr(current, cpumask_of(cpu)))
-			continue;
-		/* Recheck banks in case CPUs don't all have the same */
-		if (cmci_supported(&banks))
-			cmci_discover(banks, 0);
-	}
-
-	set_cpus_allowed_ptr(current, old);
-	free_cpumask_var(old);
-}
-
-/*
- * Reenable CMCI on this CPU in case a CPU down failed.
- */
-void cmci_reenable(void)
-{
-	int banks;
-	if (cmci_supported(&banks))
-		cmci_discover(banks, 0);
-}
-
-static void intel_init_cmci(void)
-{
-	int banks;
-
-	if (!cmci_supported(&banks))
-		return;
-
-	mce_threshold_vector = intel_threshold_interrupt;
-	cmci_discover(banks, 1);
-	/*
-	 * For CPU #0 this runs with still disabled APIC, but that's
-	 * ok because only the vector is set up. We still do another
-	 * check for the banks later for CPU #0 just to make sure
-	 * to not miss any events.
-	 */
-	apic_write(APIC_LVTCMCI, THRESHOLD_APIC_VECTOR|APIC_DM_FIXED);
-	cmci_recheck();
-}
-
-void mce_intel_feature_init(struct cpuinfo_x86 *c)
-{
-	intel_init_thermal(c);
-	intel_init_cmci();
-}
diff --git a/arch/x86/kernel/cpu/mcheck/non-fatal.c b/arch/x86/kernel/cpu/mcheck/non-fatal.c
index 70b710420f7..f5f2d6f71fb 100644
--- a/arch/x86/kernel/cpu/mcheck/non-fatal.c
+++ b/arch/x86/kernel/cpu/mcheck/non-fatal.c
@@ -17,10 +17,9 @@
 
 #include <asm/processor.h>
 #include <asm/system.h>
+#include <asm/mce.h>
 #include <asm/msr.h>
 
-#include "mce.h"
-
 static int		firstbank;
 
 #define MCE_RATE	(15*HZ)	/* timer rate is 15s */
diff --git a/arch/x86/kernel/cpu/mcheck/p4.c b/arch/x86/kernel/cpu/mcheck/p4.c
index 82cee108a2d..4482aea9aa2 100644
--- a/arch/x86/kernel/cpu/mcheck/p4.c
+++ b/arch/x86/kernel/cpu/mcheck/p4.c
@@ -1,21 +1,15 @@
 /*
  * P4 specific Machine Check Exception Reporting
  */
-
-#include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/smp.h>
 
-#include <asm/therm_throt.h>
 #include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/apic.h>
+#include <asm/mce.h>
 #include <asm/msr.h>
 
-#include "mce.h"
-
 /* as supported by the P4/Xeon family */
 struct intel_mce_extended_msrs {
 	u32 eax;
@@ -33,46 +27,6 @@ struct intel_mce_extended_msrs {
 
 static int mce_num_extended_msrs;
 
-
-#ifdef CONFIG_X86_MCE_P4THERMAL
-
-static void unexpected_thermal_interrupt(struct pt_regs *regs)
-{
-	printk(KERN_ERR "CPU%d: Unexpected LVT TMR interrupt!\n",
-			smp_processor_id());
-	add_taint(TAINT_MACHINE_CHECK);
-}
-
-/* P4/Xeon Thermal transition interrupt handler: */
-static void intel_thermal_interrupt(struct pt_regs *regs)
-{
-	__u64 msr_val;
-
-	ack_APIC_irq();
-
-	rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
-	therm_throt_process(msr_val & THERM_STATUS_PROCHOT);
-}
-
-/* Thermal interrupt handler for this CPU setup: */
-static void (*vendor_thermal_interrupt)(struct pt_regs *regs) =
-						unexpected_thermal_interrupt;
-
-void smp_thermal_interrupt(struct pt_regs *regs)
-{
-	irq_enter();
-	vendor_thermal_interrupt(regs);
-	__get_cpu_var(irq_stat).irq_thermal_count++;
-	irq_exit();
-}
-
-void intel_set_thermal_handler(void)
-{
-	vendor_thermal_interrupt = intel_thermal_interrupt;
-}
-
-#endif /* CONFIG_X86_MCE_P4THERMAL */
-
 /* P4/Xeon Extended MCE MSR retrieval, return 0 if unsupported */
 static void intel_get_extended_msrs(struct intel_mce_extended_msrs *r)
 {
diff --git a/arch/x86/kernel/cpu/mcheck/p5.c b/arch/x86/kernel/cpu/mcheck/p5.c
index 015f481ab1b..5c0e6533d9b 100644
--- a/arch/x86/kernel/cpu/mcheck/p5.c
+++ b/arch/x86/kernel/cpu/mcheck/p5.c
@@ -10,12 +10,11 @@
 
 #include <asm/processor.h>
 #include <asm/system.h>
+#include <asm/mce.h>
 #include <asm/msr.h>
 
-#include "mce.h"
-
 /* By default disabled */
-int		mce_p5_enable;
+int mce_p5_enabled __read_mostly;
 
 /* Machine check handler for Pentium class Intel CPUs: */
 static void pentium_machine_check(struct pt_regs *regs, long error_code)
@@ -43,15 +42,13 @@ void intel_p5_mcheck_init(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
 
-	/* Check for MCE support: */
-	if (!cpu_has(c, X86_FEATURE_MCE))
+	/* Default P5 to off as its often misconnected: */
+	if (!mce_p5_enabled)
 		return;
 
-#ifdef CONFIG_X86_OLD_MCE
-	/* Default P5 to off as its often misconnected: */
-	if (mce_disabled != -1)
+	/* Check for MCE support: */
+	if (!cpu_has(c, X86_FEATURE_MCE))
 		return;
-#endif
 
 	machine_check_vector = pentium_machine_check;
 	/* Make sure the vector pointer is visible before we enable MCEs: */
diff --git a/arch/x86/kernel/cpu/mcheck/p6.c b/arch/x86/kernel/cpu/mcheck/p6.c
index 43c24e66745..01e4f817818 100644
--- a/arch/x86/kernel/cpu/mcheck/p6.c
+++ b/arch/x86/kernel/cpu/mcheck/p6.c
@@ -10,10 +10,9 @@
 
 #include <asm/processor.h>
 #include <asm/system.h>
+#include <asm/mce.h>
 #include <asm/msr.h>
 
-#include "mce.h"
-
 /* Machine Check Handler For PII/PIII */
 static void intel_machine_check(struct pt_regs *regs, long error_code)
 {
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index 7b1ae2e20ba..bff8dd191dd 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -13,13 +13,23 @@
  * Credits: Adapted from Zwane Mwaikambo's original code in mce_intel.c.
  *          Inspired by Ross Biro's and Al Borchers' counter code.
  */
+#include <linux/interrupt.h>
 #include <linux/notifier.h>
 #include <linux/jiffies.h>
+#include <linux/kernel.h>
 #include <linux/percpu.h>
 #include <linux/sysdev.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/smp.h>
 #include <linux/cpu.h>
 
-#include <asm/therm_throt.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/apic.h>
+#include <asm/idle.h>
+#include <asm/mce.h>
+#include <asm/msr.h>
 
 /* How long to wait between reporting thermal events */
 #define CHECK_INTERVAL		(300 * HZ)
@@ -27,7 +37,7 @@
 static DEFINE_PER_CPU(__u64, next_check) = INITIAL_JIFFIES;
 static DEFINE_PER_CPU(unsigned long, thermal_throttle_count);
 
-atomic_t therm_throt_en		= ATOMIC_INIT(0);
+static atomic_t therm_throt_en		= ATOMIC_INIT(0);
 
 #ifdef CONFIG_SYSFS
 #define define_therm_throt_sysdev_one_ro(_name)				\
@@ -82,7 +92,7 @@ static struct attribute_group thermal_throttle_attr_group = {
  *          1 : Event should be logged further, and a message has been
  *              printed to the syslog.
  */
-int therm_throt_process(int curr)
+static int therm_throt_process(int curr)
 {
 	unsigned int cpu = smp_processor_id();
 	__u64 tmp_jiffs = get_jiffies_64();
@@ -186,6 +196,94 @@ static __init int thermal_throttle_init_device(void)
 
 	return 0;
 }
-
 device_initcall(thermal_throttle_init_device);
+
 #endif /* CONFIG_SYSFS */
+
+/* Thermal transition interrupt handler */
+static void intel_thermal_interrupt(void)
+{
+	__u64 msr_val;
+
+	rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
+	if (therm_throt_process(msr_val & THERM_STATUS_PROCHOT))
+		mce_log_therm_throt_event(msr_val);
+}
+
+static void unexpected_thermal_interrupt(void)
+{
+	printk(KERN_ERR "CPU%d: Unexpected LVT TMR interrupt!\n",
+			smp_processor_id());
+	add_taint(TAINT_MACHINE_CHECK);
+}
+
+static void (*smp_thermal_vector)(void) = unexpected_thermal_interrupt;
+
+asmlinkage void smp_thermal_interrupt(struct pt_regs *regs)
+{
+	exit_idle();
+	irq_enter();
+	inc_irq_stat(irq_thermal_count);
+	smp_thermal_vector();
+	irq_exit();
+	/* Ack only at the end to avoid potential reentry */
+	ack_APIC_irq();
+}
+
+void intel_init_thermal(struct cpuinfo_x86 *c)
+{
+	unsigned int cpu = smp_processor_id();
+	int tm2 = 0;
+	u32 l, h;
+
+	/* Thermal monitoring depends on ACPI and clock modulation*/
+	if (!cpu_has(c, X86_FEATURE_ACPI) || !cpu_has(c, X86_FEATURE_ACC))
+		return;
+
+	/*
+	 * First check if its enabled already, in which case there might
+	 * be some SMM goo which handles it, so we can't even put a handler
+	 * since it might be delivered via SMI already:
+	 */
+	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+	h = apic_read(APIC_LVTTHMR);
+	if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
+		printk(KERN_DEBUG
+		       "CPU%d: Thermal monitoring handled by SMI\n", cpu);
+		return;
+	}
+
+	if (cpu_has(c, X86_FEATURE_TM2) && (l & MSR_IA32_MISC_ENABLE_TM2))
+		tm2 = 1;
+
+	/* Check whether a vector already exists */
+	if (h & APIC_VECTOR_MASK) {
+		printk(KERN_DEBUG
+		       "CPU%d: Thermal LVT vector (%#x) already installed\n",
+		       cpu, (h & APIC_VECTOR_MASK));
+		return;
+	}
+
+	/* We'll mask the thermal vector in the lapic till we're ready: */
+	h = THERMAL_APIC_VECTOR | APIC_DM_FIXED | APIC_LVT_MASKED;
+	apic_write(APIC_LVTTHMR, h);
+
+	rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
+	wrmsr(MSR_IA32_THERM_INTERRUPT,
+		l | (THERM_INT_LOW_ENABLE | THERM_INT_HIGH_ENABLE), h);
+
+	smp_thermal_vector = intel_thermal_interrupt;
+
+	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+	wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h);
+
+	/* Unmask the thermal vector: */
+	l = apic_read(APIC_LVTTHMR);
+	apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
+
+	printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n",
+	       cpu, tm2 ? "TM2" : "TM1");
+
+	/* enable thermal throttle processing */
+	atomic_set(&therm_throt_en, 1);
+}
diff --git a/arch/x86/kernel/cpu/mcheck/winchip.c b/arch/x86/kernel/cpu/mcheck/winchip.c
index 81b02487090..54060f56597 100644
--- a/arch/x86/kernel/cpu/mcheck/winchip.c
+++ b/arch/x86/kernel/cpu/mcheck/winchip.c
@@ -9,10 +9,9 @@
 
 #include <asm/processor.h>
 #include <asm/system.h>
+#include <asm/mce.h>
 #include <asm/msr.h>
 
-#include "mce.h"
-
 /* Machine check handler for WinChip C6: */
 static void winchip_machine_check(struct pt_regs *regs, long error_code)
 {
diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index 275bc142cd5..76dfef23f78 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -19,6 +19,7 @@
 #include <linux/kdebug.h>
 #include <linux/sched.h>
 #include <linux/uaccess.h>
+#include <linux/highmem.h>
 
 #include <asm/apic.h>
 #include <asm/stacktrace.h>
@@ -389,23 +390,23 @@ static u64 intel_pmu_raw_event(u64 event)
 	return event & CORE_EVNTSEL_MASK;
 }
 
-static const u64 amd_0f_hw_cache_event_ids
+static const u64 amd_hw_cache_event_ids
 				[PERF_COUNT_HW_CACHE_MAX]
 				[PERF_COUNT_HW_CACHE_OP_MAX]
 				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
 {
  [ C(L1D) ] = {
 	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0,
-		[ C(RESULT_MISS)   ] = 0,
+		[ C(RESULT_ACCESS) ] = 0x0040, /* Data Cache Accesses        */
+		[ C(RESULT_MISS)   ] = 0x0041, /* Data Cache Misses          */
 	},
 	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_ACCESS) ] = 0x0042, /* Data Cache Refills from L2 */
 		[ C(RESULT_MISS)   ] = 0,
 	},
 	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0,
-		[ C(RESULT_MISS)   ] = 0,
+		[ C(RESULT_ACCESS) ] = 0x0267, /* Data Prefetcher :attempts  */
+		[ C(RESULT_MISS)   ] = 0x0167, /* Data Prefetcher :cancelled */
 	},
  },
  [ C(L1I ) ] = {
@@ -418,17 +419,17 @@ static const u64 amd_0f_hw_cache_event_ids
 		[ C(RESULT_MISS)   ] = -1,
 	},
 	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_ACCESS) ] = 0x014B, /* Prefetch Instructions :Load */
 		[ C(RESULT_MISS)   ] = 0,
 	},
  },
  [ C(LL  ) ] = {
 	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0,
-		[ C(RESULT_MISS)   ] = 0,
+		[ C(RESULT_ACCESS) ] = 0x037D, /* Requests to L2 Cache :IC+DC */
+		[ C(RESULT_MISS)   ] = 0x037E, /* L2 Cache Misses : IC+DC     */
 	},
 	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_ACCESS) ] = 0x017F, /* L2 Fill/Writeback           */
 		[ C(RESULT_MISS)   ] = 0,
 	},
 	[ C(OP_PREFETCH) ] = {
@@ -438,8 +439,8 @@ static const u64 amd_0f_hw_cache_event_ids
  },
  [ C(DTLB) ] = {
 	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0,
-		[ C(RESULT_MISS)   ] = 0,
+		[ C(RESULT_ACCESS) ] = 0x0040, /* Data Cache Accesses        */
+		[ C(RESULT_MISS)   ] = 0x0046, /* L1 DTLB and L2 DLTB Miss   */
 	},
 	[ C(OP_WRITE) ] = {
 		[ C(RESULT_ACCESS) ] = 0,
@@ -1223,6 +1224,8 @@ again:
 		if (!intel_pmu_save_and_restart(counter))
 			continue;
 
+		data.period = counter->hw.last_period;
+
 		if (perf_counter_overflow(counter, 1, &data))
 			intel_pmu_disable_counter(&counter->hw, bit);
 	}
@@ -1459,18 +1462,16 @@ static int intel_pmu_init(void)
 
 static int amd_pmu_init(void)
 {
+	/* Performance-monitoring supported from K7 and later: */
+	if (boot_cpu_data.x86 < 6)
+		return -ENODEV;
+
 	x86_pmu = amd_pmu;
 
-	switch (boot_cpu_data.x86) {
-	case 0x0f:
-	case 0x10:
-	case 0x11:
-		memcpy(hw_cache_event_ids, amd_0f_hw_cache_event_ids,
-		       sizeof(hw_cache_event_ids));
+	/* Events are common for all AMDs */
+	memcpy(hw_cache_event_ids, amd_hw_cache_event_ids,
+	       sizeof(hw_cache_event_ids));
 
-		pr_cont("AMD Family 0f/10/11 events, ");
-		break;
-	}
 	return 0;
 }
 
@@ -1554,9 +1555,9 @@ const struct pmu *hw_perf_counter_init(struct perf_counter *counter)
  */
 
 static inline
-void callchain_store(struct perf_callchain_entry *entry, unsigned long ip)
+void callchain_store(struct perf_callchain_entry *entry, u64 ip)
 {
-	if (entry->nr < MAX_STACK_DEPTH)
+	if (entry->nr < PERF_MAX_STACK_DEPTH)
 		entry->ip[entry->nr++] = ip;
 }
 
@@ -1577,8 +1578,8 @@ static void backtrace_warning(void *data, char *msg)
 
 static int backtrace_stack(void *data, char *name)
 {
-	/* Don't bother with IRQ stacks for now */
-	return -1;
+	/* Process all stacks: */
+	return 0;
 }
 
 static void backtrace_address(void *data, unsigned long addr, int reliable)
@@ -1596,47 +1597,59 @@ static const struct stacktrace_ops backtrace_ops = {
 	.address		= backtrace_address,
 };
 
+#include "../dumpstack.h"
+
 static void
 perf_callchain_kernel(struct pt_regs *regs, struct perf_callchain_entry *entry)
 {
-	unsigned long bp;
-	char *stack;
-	int nr = entry->nr;
+	callchain_store(entry, PERF_CONTEXT_KERNEL);
+	callchain_store(entry, regs->ip);
 
-	callchain_store(entry, instruction_pointer(regs));
+	dump_trace(NULL, regs, NULL, 0, &backtrace_ops, entry);
+}
 
-	stack = ((char *)regs + sizeof(struct pt_regs));
-#ifdef CONFIG_FRAME_POINTER
-	bp = frame_pointer(regs);
-#else
-	bp = 0;
-#endif
+/*
+ * best effort, GUP based copy_from_user() that assumes IRQ or NMI context
+ */
+static unsigned long
+copy_from_user_nmi(void *to, const void __user *from, unsigned long n)
+{
+	unsigned long offset, addr = (unsigned long)from;
+	int type = in_nmi() ? KM_NMI : KM_IRQ0;
+	unsigned long size, len = 0;
+	struct page *page;
+	void *map;
+	int ret;
 
-	dump_trace(NULL, regs, (void *)stack, bp, &backtrace_ops, entry);
+	do {
+		ret = __get_user_pages_fast(addr, 1, 0, &page);
+		if (!ret)
+			break;
 
-	entry->kernel = entry->nr - nr;
-}
+		offset = addr & (PAGE_SIZE - 1);
+		size = min(PAGE_SIZE - offset, n - len);
 
+		map = kmap_atomic(page, type);
+		memcpy(to, map+offset, size);
+		kunmap_atomic(map, type);
+		put_page(page);
 
-struct stack_frame {
-	const void __user	*next_fp;
-	unsigned long		return_address;
-};
+		len  += size;
+		to   += size;
+		addr += size;
+
+	} while (len < n);
+
+	return len;
+}
 
 static int copy_stack_frame(const void __user *fp, struct stack_frame *frame)
 {
-	int ret;
+	unsigned long bytes;
 
-	if (!access_ok(VERIFY_READ, fp, sizeof(*frame)))
-		return 0;
+	bytes = copy_from_user_nmi(frame, fp, sizeof(*frame));
 
-	ret = 1;
-	pagefault_disable();
-	if (__copy_from_user_inatomic(frame, fp, sizeof(*frame)))
-		ret = 0;
-	pagefault_enable();
-
-	return ret;
+	return bytes == sizeof(*frame);
 }
 
 static void
@@ -1644,28 +1657,28 @@ perf_callchain_user(struct pt_regs *regs, struct perf_callchain_entry *entry)
 {
 	struct stack_frame frame;
 	const void __user *fp;
-	int nr = entry->nr;
 
-	regs = (struct pt_regs *)current->thread.sp0 - 1;
-	fp   = (void __user *)regs->bp;
+	if (!user_mode(regs))
+		regs = task_pt_regs(current);
 
+	fp = (void __user *)regs->bp;
+
+	callchain_store(entry, PERF_CONTEXT_USER);
 	callchain_store(entry, regs->ip);
 
-	while (entry->nr < MAX_STACK_DEPTH) {
-		frame.next_fp	     = NULL;
+	while (entry->nr < PERF_MAX_STACK_DEPTH) {
+		frame.next_frame	     = NULL;
 		frame.return_address = 0;
 
 		if (!copy_stack_frame(fp, &frame))
 			break;
 
-		if ((unsigned long)fp < user_stack_pointer(regs))
+		if ((unsigned long)fp < regs->sp)
 			break;
 
 		callchain_store(entry, frame.return_address);
-		fp = frame.next_fp;
+		fp = frame.next_frame;
 	}
-
-	entry->user = entry->nr - nr;
 }
 
 static void
@@ -1701,9 +1714,6 @@ struct perf_callchain_entry *perf_callchain(struct pt_regs *regs)
 		entry = &__get_cpu_var(irq_entry);
 
 	entry->nr = 0;
-	entry->hv = 0;
-	entry->kernel = 0;
-	entry->user = 0;
 
 	perf_do_callchain(regs, entry);
 
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index d6f5b9fbde3..5c481f6205b 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -716,11 +716,15 @@ static void probe_nmi_watchdog(void)
 		wd_ops = &k7_wd_ops;
 		break;
 	case X86_VENDOR_INTEL:
-		/*
-		 * Work around Core Duo (Yonah) errata AE49 where perfctr1
-		 * doesn't have a working enable bit.
+		/* Work around where perfctr1 doesn't have a working enable
+		 * bit as described in the following errata:
+		 * AE49 Core Duo and Intel Core Solo 65 nm
+		 * AN49 Intel Pentium Dual-Core
+		 * AF49 Dual-Core Intel Xeon Processor LV
 		 */
-		if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 14) {
+		if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 14) ||
+		    ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 15 &&
+		     boot_cpu_data.x86_mask == 4))) {
 			intel_arch_wd_ops.perfctr = MSR_ARCH_PERFMON_PERFCTR0;
 			intel_arch_wd_ops.evntsel = MSR_ARCH_PERFMON_EVENTSEL0;
 		}
diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index ff958248e61..5e409dc298a 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -27,6 +27,7 @@
 #include <asm/cpu.h>
 #include <asm/reboot.h>
 #include <asm/virtext.h>
+#include <asm/iommu.h>
 
 
 #if defined(CONFIG_SMP) && defined(CONFIG_X86_LOCAL_APIC)
@@ -103,5 +104,10 @@ void native_machine_crash_shutdown(struct pt_regs *regs)
 #ifdef CONFIG_HPET_TIMER
 	hpet_disable();
 #endif
+
+#ifdef CONFIG_X86_64
+	pci_iommu_shutdown();
+#endif
+
 	crash_save_cpu(regs, safe_smp_processor_id());
 }
diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c
index 1736acc4d7a..96f7ac0bbf0 100644
--- a/arch/x86/kernel/efi.c
+++ b/arch/x86/kernel/efi.c
@@ -240,10 +240,35 @@ static void __init do_add_efi_memmap(void)
 		unsigned long long size = md->num_pages << EFI_PAGE_SHIFT;
 		int e820_type;
 
-		if (md->attribute & EFI_MEMORY_WB)
-			e820_type = E820_RAM;
-		else
+		switch (md->type) {
+		case EFI_LOADER_CODE:
+		case EFI_LOADER_DATA:
+		case EFI_BOOT_SERVICES_CODE:
+		case EFI_BOOT_SERVICES_DATA:
+		case EFI_CONVENTIONAL_MEMORY:
+			if (md->attribute & EFI_MEMORY_WB)
+				e820_type = E820_RAM;
+			else
+				e820_type = E820_RESERVED;
+			break;
+		case EFI_ACPI_RECLAIM_MEMORY:
+			e820_type = E820_ACPI;
+			break;
+		case EFI_ACPI_MEMORY_NVS:
+			e820_type = E820_NVS;
+			break;
+		case EFI_UNUSABLE_MEMORY:
+			e820_type = E820_UNUSABLE;
+			break;
+		default:
+			/*
+			 * EFI_RESERVED_TYPE EFI_RUNTIME_SERVICES_CODE
+			 * EFI_RUNTIME_SERVICES_DATA EFI_MEMORY_MAPPED_IO
+			 * EFI_MEMORY_MAPPED_IO_PORT_SPACE EFI_PAL_CODE
+			 */
 			e820_type = E820_RESERVED;
+			break;
+		}
 		e820_add_region(start, size, e820_type);
 	}
 	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index c929add475c..c097e7d607c 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -48,7 +48,6 @@
 #include <asm/segment.h>
 #include <asm/smp.h>
 #include <asm/page_types.h>
-#include <asm/desc.h>
 #include <asm/percpu.h>
 #include <asm/dwarf2.h>
 #include <asm/processor-flags.h>
@@ -84,7 +83,7 @@
 #define preempt_stop(clobbers)	DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF
 #else
 #define preempt_stop(clobbers)
-#define resume_kernel		restore_nocheck
+#define resume_kernel		restore_all
 #endif
 
 .macro TRACE_IRQS_IRET
@@ -372,7 +371,7 @@ END(ret_from_exception)
 ENTRY(resume_kernel)
 	DISABLE_INTERRUPTS(CLBR_ANY)
 	cmpl $0,TI_preempt_count(%ebp)	# non-zero preempt_count ?
-	jnz restore_nocheck
+	jnz restore_all
 need_resched:
 	movl TI_flags(%ebp), %ecx	# need_resched set ?
 	testb $_TIF_NEED_RESCHED, %cl
@@ -540,6 +539,8 @@ syscall_exit:
 	jne syscall_exit_work
 
 restore_all:
+	TRACE_IRQS_IRET
+restore_all_notrace:
 	movl PT_EFLAGS(%esp), %eax	# mix EFLAGS, SS and CS
 	# Warning: PT_OLDSS(%esp) contains the wrong/random values if we
 	# are returning to the kernel.
@@ -551,8 +552,6 @@ restore_all:
 	CFI_REMEMBER_STATE
 	je ldt_ss			# returning to user-space with LDT SS
 restore_nocheck:
-	TRACE_IRQS_IRET
-restore_nocheck_notrace:
 	RESTORE_REGS 4			# skip orig_eax/error_code
 	CFI_ADJUST_CFA_OFFSET -4
 irq_return:
@@ -588,22 +587,34 @@ ldt_ss:
 	jne restore_nocheck
 #endif
 
-	/* If returning to userspace with 16bit stack,
-	 * try to fix the higher word of ESP, as the CPU
-	 * won't restore it.
-	 * This is an "official" bug of all the x86-compatible
-	 * CPUs, which we can try to work around to make
-	 * dosemu and wine happy. */
-	movl PT_OLDESP(%esp), %eax
-	movl %esp, %edx
-	call patch_espfix_desc
+/*
+ * Setup and switch to ESPFIX stack
+ *
+ * We're returning to userspace with a 16 bit stack. The CPU will not
+ * restore the high word of ESP for us on executing iret... This is an
+ * "official" bug of all the x86-compatible CPUs, which we can work
+ * around to make dosemu and wine happy. We do this by preloading the
+ * high word of ESP with the high word of the userspace ESP while
+ * compensating for the offset by changing to the ESPFIX segment with
+ * a base address that matches for the difference.
+ */
+	mov %esp, %edx			/* load kernel esp */
+	mov PT_OLDESP(%esp), %eax	/* load userspace esp */
+	mov %dx, %ax			/* eax: new kernel esp */
+	sub %eax, %edx			/* offset (low word is 0) */
+	PER_CPU(gdt_page, %ebx)
+	shr $16, %edx
+	mov %dl, GDT_ENTRY_ESPFIX_SS * 8 + 4(%ebx) /* bits 16..23 */
+	mov %dh, GDT_ENTRY_ESPFIX_SS * 8 + 7(%ebx) /* bits 24..31 */
 	pushl $__ESPFIX_SS
 	CFI_ADJUST_CFA_OFFSET 4
-	pushl %eax
+	push %eax			/* new kernel esp */
 	CFI_ADJUST_CFA_OFFSET 4
+	/* Disable interrupts, but do not irqtrace this section: we
+	 * will soon execute iret and the tracer was already set to
+	 * the irqstate after the iret */
 	DISABLE_INTERRUPTS(CLBR_EAX)
-	TRACE_IRQS_OFF
-	lss (%esp), %esp
+	lss (%esp), %esp		/* switch to espfix segment */
 	CFI_ADJUST_CFA_OFFSET -8
 	jmp restore_nocheck
 	CFI_ENDPROC
@@ -716,15 +727,24 @@ PTREGSCALL(vm86)
 PTREGSCALL(vm86old)
 
 .macro FIXUP_ESPFIX_STACK
-	/* since we are on a wrong stack, we cant make it a C code :( */
+/*
+ * Switch back for ESPFIX stack to the normal zerobased stack
+ *
+ * We can't call C functions using the ESPFIX stack. This code reads
+ * the high word of the segment base from the GDT and swiches to the
+ * normal stack and adjusts ESP with the matching offset.
+ */
+	/* fixup the stack */
 	PER_CPU(gdt_page, %ebx)
-	GET_DESC_BASE(GDT_ENTRY_ESPFIX_SS, %ebx, %eax, %ax, %al, %ah)
-	addl %esp, %eax
+	mov GDT_ENTRY_ESPFIX_SS * 8 + 4(%ebx), %al /* bits 16..23 */
+	mov GDT_ENTRY_ESPFIX_SS * 8 + 7(%ebx), %ah /* bits 24..31 */
+	shl $16, %eax
+	addl %esp, %eax			/* the adjusted stack pointer */
 	pushl $__KERNEL_DS
 	CFI_ADJUST_CFA_OFFSET 4
 	pushl %eax
 	CFI_ADJUST_CFA_OFFSET 4
-	lss (%esp), %esp
+	lss (%esp), %esp		/* switch to the normal stack segment */
 	CFI_ADJUST_CFA_OFFSET -8
 .endm
 .macro UNWIND_ESPFIX_STACK
@@ -1154,6 +1174,7 @@ ENTRY(ftrace_graph_caller)
 	pushl %edx
 	movl 0xc(%esp), %edx
 	lea 0x4(%ebp), %eax
+	movl (%ebp), %ecx
 	subl $MCOUNT_INSN_SIZE, %edx
 	call prepare_ftrace_return
 	popl %edx
@@ -1168,6 +1189,7 @@ return_to_handler:
 	pushl %eax
 	pushl %ecx
 	pushl %edx
+	movl %ebp, %eax
 	call ftrace_return_to_handler
 	movl %eax, 0xc(%esp)
 	popl %edx
@@ -1329,7 +1351,7 @@ nmi_stack_correct:
 	xorl %edx,%edx		# zero error code
 	movl %esp,%eax		# pt_regs pointer
 	call do_nmi
-	jmp restore_nocheck_notrace
+	jmp restore_all_notrace
 	CFI_ENDPROC
 
 nmi_stack_fixup:
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index de74f0a3e0e..c251be74510 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -135,6 +135,7 @@ ENTRY(ftrace_graph_caller)
 
 	leaq 8(%rbp), %rdi
 	movq 0x38(%rsp), %rsi
+	movq (%rbp), %rdx
 	subq $MCOUNT_INSN_SIZE, %rsi
 
 	call	prepare_ftrace_return
@@ -150,6 +151,7 @@ GLOBAL(return_to_handler)
 	/* Save the return values */
 	movq %rax, (%rsp)
 	movq %rdx, 8(%rsp)
+	movq %rbp, %rdi
 
 	call ftrace_return_to_handler
 
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index b79c5533c42..d94e1ea3b9f 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -408,7 +408,8 @@ int ftrace_disable_ftrace_graph_caller(void)
  * Hook the return address and push it in the stack of return addrs
  * in current thread info.
  */
-void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
+void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
+			   unsigned long frame_pointer)
 {
 	unsigned long old;
 	int faulted;
@@ -453,7 +454,8 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 		return;
 	}
 
-	if (ftrace_push_return_trace(old, self_addr, &trace.depth) == -EBUSY) {
+	if (ftrace_push_return_trace(old, self_addr, &trace.depth,
+		    frame_pointer) == -EBUSY) {
 		*parent = old;
 		return;
 	}
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index dc5ed4bdd88..8663afb5653 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -13,7 +13,6 @@
 #include <asm/segment.h>
 #include <asm/page_types.h>
 #include <asm/pgtable_types.h>
-#include <asm/desc.h>
 #include <asm/cache.h>
 #include <asm/thread_info.h>
 #include <asm/asm-offsets.h>
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 54b29bb24e7..fa54f78e2a0 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -12,7 +12,6 @@
 #include <linux/linkage.h>
 #include <linux/threads.h>
 #include <linux/init.h>
-#include <asm/desc.h>
 #include <asm/segment.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 81408b93f88..dedc2bddf7a 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -510,7 +510,8 @@ static int hpet_setup_irq(struct hpet_dev *dev)
 {
 
 	if (request_irq(dev->irq, hpet_interrupt_handler,
-			IRQF_DISABLED|IRQF_NOBALANCING, dev->name, dev))
+			IRQF_TIMER | IRQF_DISABLED | IRQF_NOBALANCING,
+			dev->name, dev))
 		return -1;
 
 	disable_irq(dev->irq);
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 745579bc825..47630479b06 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -32,6 +32,8 @@ int no_iommu __read_mostly;
 /* Set this to 1 if there is a HW IOMMU in the system */
 int iommu_detected __read_mostly = 0;
 
+int iommu_pass_through;
+
 dma_addr_t bad_dma_address __read_mostly = 0;
 EXPORT_SYMBOL(bad_dma_address);
 
@@ -209,6 +211,10 @@ static __init int iommu_setup(char *p)
 #ifdef CONFIG_SWIOTLB
 		if (!strncmp(p, "soft", 4))
 			swiotlb = 1;
+		if (!strncmp(p, "pt", 2)) {
+			iommu_pass_through = 1;
+			return 1;
+		}
 #endif
 
 		gart_parse_options(p);
@@ -290,6 +296,8 @@ static int __init pci_iommu_init(void)
 void pci_iommu_shutdown(void)
 {
 	gart_iommu_shutdown();
+
+	amd_iommu_shutdown();
 }
 /* Must execute after PCI subsystem */
 fs_initcall(pci_iommu_init);
diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c
index a1712f2b50f..6af96ee4420 100644
--- a/arch/x86/kernel/pci-swiotlb.c
+++ b/arch/x86/kernel/pci-swiotlb.c
@@ -71,7 +71,8 @@ void __init pci_swiotlb_init(void)
 {
 	/* don't initialize swiotlb if iommu=off (no_iommu=1) */
 #ifdef CONFIG_X86_64
-	if (!iommu_detected && !no_iommu && max_pfn > MAX_DMA32_PFN)
+	if ((!iommu_detected && !no_iommu && max_pfn > MAX_DMA32_PFN) ||
+		iommu_pass_through)
 	       swiotlb = 1;
 #endif
 	if (swiotlb_force)
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 5f935f0d586..a0f48f5671c 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -54,6 +54,7 @@
 #include <asm/traps.h>
 #include <asm/desc.h>
 #include <asm/i387.h>
+#include <asm/mce.h>
 
 #include <asm/mach_traps.h>
 
@@ -65,8 +66,6 @@
 #include <asm/setup.h>
 #include <asm/traps.h>
 
-#include "cpu/mcheck/mce.h"
-
 asmlinkage int system_call(void);
 
 /* Do we ignore FPU interrupts ? */
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index b0597ad02c9..6e1a368d21d 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -590,22 +590,26 @@ EXPORT_SYMBOL(recalibrate_cpu_khz);
  */
 
 DEFINE_PER_CPU(unsigned long, cyc2ns);
+DEFINE_PER_CPU(unsigned long long, cyc2ns_offset);
 
 static void set_cyc2ns_scale(unsigned long cpu_khz, int cpu)
 {
-	unsigned long long tsc_now, ns_now;
+	unsigned long long tsc_now, ns_now, *offset;
 	unsigned long flags, *scale;
 
 	local_irq_save(flags);
 	sched_clock_idle_sleep_event();
 
 	scale = &per_cpu(cyc2ns, cpu);
+	offset = &per_cpu(cyc2ns_offset, cpu);
 
 	rdtscll(tsc_now);
 	ns_now = __cycles_2_ns(tsc_now);
 
-	if (cpu_khz)
+	if (cpu_khz) {
 		*scale = (NSEC_PER_MSEC << CYC2NS_SCALE_FACTOR)/cpu_khz;
+		*offset = ns_now - (tsc_now * *scale >> CYC2NS_SCALE_FACTOR);
+	}
 
 	sched_clock_idle_wakeup_event(0);
 	local_irq_restore(flags);
diff --git a/arch/x86/lib/usercopy_64.c b/arch/x86/lib/usercopy_64.c
index ec13cb5f17e..b7c2849ffb6 100644
--- a/arch/x86/lib/usercopy_64.c
+++ b/arch/x86/lib/usercopy_64.c
@@ -127,7 +127,7 @@ EXPORT_SYMBOL(__strnlen_user);
 
 long strnlen_user(const char __user *s, long n)
 {
-	if (!access_ok(VERIFY_READ, s, n))
+	if (!access_ok(VERIFY_READ, s, 1))
 		return 0;
 	return __strnlen_user(s, n);
 }
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index baa0e86adfb..78a5fff857b 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -952,8 +952,6 @@ do_page_fault(struct pt_regs *regs, unsigned long error_code)
 	tsk = current;
 	mm = tsk->mm;
 
-	prefetchw(&mm->mmap_sem);
-
 	/* Get the faulting address: */
 	address = read_cr2();
 
@@ -963,6 +961,7 @@ do_page_fault(struct pt_regs *regs, unsigned long error_code)
 	 */
 	if (kmemcheck_active(regs))
 		kmemcheck_hide(regs);
+	prefetchw(&mm->mmap_sem);
 
 	if (unlikely(kmmio_fault(regs, address)))
 		return;
@@ -1114,7 +1113,7 @@ good_area:
 	 * make sure we exit gracefully rather than endlessly redo
 	 * the fault:
 	 */
-	fault = handle_mm_fault(mm, vma, address, write);
+	fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0);
 
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		mm_fault_error(regs, error_code, address, fault);
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index 6340cef6798..71da1bca13c 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -14,7 +14,7 @@
 static inline pte_t gup_get_pte(pte_t *ptep)
 {
 #ifndef CONFIG_X86_PAE
-	return *ptep;
+	return ACCESS_ONCE(*ptep);
 #else
 	/*
 	 * With get_user_pages_fast, we walk down the pagetables without taking
@@ -219,6 +219,62 @@ static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end,
 	return 1;
 }
 
+/*
+ * Like get_user_pages_fast() except its IRQ-safe in that it won't fall
+ * back to the regular GUP.
+ */
+int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
+			  struct page **pages)
+{
+	struct mm_struct *mm = current->mm;
+	unsigned long addr, len, end;
+	unsigned long next;
+	unsigned long flags;
+	pgd_t *pgdp;
+	int nr = 0;
+
+	start &= PAGE_MASK;
+	addr = start;
+	len = (unsigned long) nr_pages << PAGE_SHIFT;
+	end = start + len;
+	if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ,
+					(void __user *)start, len)))
+		return 0;
+
+	/*
+	 * XXX: batch / limit 'nr', to avoid large irq off latency
+	 * needs some instrumenting to determine the common sizes used by
+	 * important workloads (eg. DB2), and whether limiting the batch size
+	 * will decrease performance.
+	 *
+	 * It seems like we're in the clear for the moment. Direct-IO is
+	 * the main guy that batches up lots of get_user_pages, and even
+	 * they are limited to 64-at-a-time which is not so many.
+	 */
+	/*
+	 * This doesn't prevent pagetable teardown, but does prevent
+	 * the pagetables and pages from being freed on x86.
+	 *
+	 * So long as we atomically load page table pointers versus teardown
+	 * (which we do on x86, with the above PAE exception), we can follow the
+	 * address down to the the page and take a ref on it.
+	 */
+	local_irq_save(flags);
+	pgdp = pgd_offset(mm, addr);
+	do {
+		pgd_t pgd = *pgdp;
+
+		next = pgd_addr_end(addr, end);
+		if (pgd_none(pgd))
+			break;
+		if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
+			break;
+	} while (pgdp++, addr = next, addr != end);
+	local_irq_restore(flags);
+
+	return nr;
+}
+
 /**
  * get_user_pages_fast() - pin user pages in memory
  * @start:	starting user address
@@ -247,11 +303,16 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 	start &= PAGE_MASK;
 	addr = start;
 	len = (unsigned long) nr_pages << PAGE_SHIFT;
+
 	end = start + len;
-	if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ,
-					(void __user *)start, len)))
+	if (end < start)
 		goto slow_irqon;
 
+#ifdef CONFIG_X86_64
+	if (end >> __VIRTUAL_MASK_SHIFT)
+		goto slow_irqon;
+#endif
+
 	/*
 	 * XXX: batch / limit 'nr', to avoid large irq off latency
 	 * needs some instrumenting to determine the common sizes used by
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 9c543290a81..c4378f4fd4a 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -527,7 +527,7 @@ phys_pud_update(pgd_t *pgd, unsigned long addr, unsigned long end,
 	return phys_pud_init(pud, addr, end, page_size_mask);
 }
 
-unsigned long __init
+unsigned long __meminit
 kernel_physical_mapping_init(unsigned long start,
 			     unsigned long end,
 			     unsigned long page_size_mask)
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index c0ecf250fe5..16c3fda85bb 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -38,15 +38,26 @@ count_resource(struct acpi_resource *acpi_res, void *data)
 	struct acpi_resource_address64 addr;
 	acpi_status status;
 
-	if (info->res_num >= PCI_BUS_NUM_RESOURCES)
-		return AE_OK;
-
 	status = resource_to_addr(acpi_res, &addr);
 	if (ACPI_SUCCESS(status))
 		info->res_num++;
 	return AE_OK;
 }
 
+static int
+bus_has_transparent_bridge(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		u16 class = dev->class >> 8;
+
+		if (class == PCI_CLASS_BRIDGE_PCI && dev->transparent)
+			return true;
+	}
+	return false;
+}
+
 static acpi_status
 setup_resource(struct acpi_resource *acpi_res, void *data)
 {
@@ -56,9 +67,7 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 	acpi_status status;
 	unsigned long flags;
 	struct resource *root;
-
-	if (info->res_num >= PCI_BUS_NUM_RESOURCES)
-		return AE_OK;
+	int max_root_bus_resources = PCI_BUS_NUM_RESOURCES;
 
 	status = resource_to_addr(acpi_res, &addr);
 	if (!ACPI_SUCCESS(status))
@@ -82,6 +91,18 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 	res->end = res->start + addr.address_length - 1;
 	res->child = NULL;
 
+	if (bus_has_transparent_bridge(info->bus))
+		max_root_bus_resources -= 3;
+	if (info->res_num >= max_root_bus_resources) {
+		printk(KERN_WARNING "PCI: Failed to allocate 0x%lx-0x%lx "
+			"from %s for %s due to _CRS returning more than "
+			"%d resource descriptors\n", (unsigned long) res->start,
+			(unsigned long) res->end, root->name, info->name,
+			max_root_bus_resources);
+		info->res_num++;
+		return AE_OK;
+	}
+
 	if (insert_resource(root, res)) {
 		printk(KERN_ERR "PCI: Failed to allocate 0x%lx-0x%lx "
 			"from %s for %s\n", (unsigned long) res->start,
@@ -217,7 +238,7 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
 #endif
 	}
 
-	if (bus && (pci_probe & PCI_USE__CRS))
+	if (bus && !(pci_probe & PCI_NO_ROOT_CRS))
 		get_current_resources(device, busnum, domain, bus);
 	return bus;
 }
diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index f893d6a6e80..2255f880678 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -101,7 +101,7 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b)
 	struct pci_root_info *info;
 
 	/* don't go for it if _CRS is used */
-	if (pci_probe & PCI_USE__CRS)
+	if (!(pci_probe & PCI_NO_ROOT_CRS))
 		return;
 
 	/* if only one root bus, don't need to anything */
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 2202b6257b8..4740119e4bb 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -515,8 +515,8 @@ char * __devinit  pcibios_setup(char *str)
 	} else if (!strcmp(str, "assign-busses")) {
 		pci_probe |= PCI_ASSIGN_ALL_BUSSES;
 		return NULL;
-	} else if (!strcmp(str, "use_crs")) {
-		pci_probe |= PCI_USE__CRS;
+	} else if (!strcmp(str, "nocrs")) {
+		pci_probe |= PCI_NO_ROOT_CRS;
 		return NULL;
 	} else if (!strcmp(str, "earlydump")) {
 		pci_early_dump_regs = 1;
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index a85bef20a3b..0fb56db16d1 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -116,7 +116,7 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
 	struct pci_bus *bus;
 	struct pci_dev *dev;
 	int idx;
-	struct resource *r, *pr;
+	struct resource *r;
 
 	/* Depth-First Search on bus tree */
 	list_for_each_entry(bus, bus_list, node) {
@@ -126,9 +126,8 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
 				r = &dev->resource[idx];
 				if (!r->flags)
 					continue;
-				pr = pci_find_parent_resource(dev, r);
-				if (!r->start || !pr ||
-				    request_resource(pr, r) < 0) {
+				if (!r->start ||
+				    pci_claim_resource(dev, idx) < 0) {
 					dev_info(&dev->dev, "BAR %d: can't allocate resource\n", idx);
 					/*
 					 * Something is wrong with the region.
@@ -149,7 +148,7 @@ static void __init pcibios_allocate_resources(int pass)
 	struct pci_dev *dev = NULL;
 	int idx, disabled;
 	u16 command;
-	struct resource *r, *pr;
+	struct resource *r;
 
 	for_each_pci_dev(dev) {
 		pci_read_config_word(dev, PCI_COMMAND, &command);
@@ -168,8 +167,7 @@ static void __init pcibios_allocate_resources(int pass)
 					(unsigned long long) r->start,
 					(unsigned long long) r->end,
 					r->flags, disabled, pass);
-				pr = pci_find_parent_resource(dev, r);
-				if (!pr || request_resource(pr, r) < 0) {
+				if (pci_claim_resource(dev, idx) < 0) {
 					dev_info(&dev->dev, "BAR %d: can't allocate resource\n", idx);
 					/* We'll assign a new address later */
 					r->end -= r->start;
@@ -197,7 +195,7 @@ static void __init pcibios_allocate_resources(int pass)
 static int __init pcibios_assign_resources(void)
 {
 	struct pci_dev *dev = NULL;
-	struct resource *r, *pr;
+	struct resource *r;
 
 	if (!(pci_probe & PCI_ASSIGN_ROMS)) {
 		/*
@@ -209,8 +207,7 @@ static int __init pcibios_assign_resources(void)
 			r = &dev->resource[PCI_ROM_RESOURCE];
 			if (!r->flags || !r->start)
 				continue;
-			pr = pci_find_parent_resource(dev, r);
-			if (!pr || request_resource(pr, r) < 0) {
+			if (pci_claim_resource(dev, PCI_ROM_RESOURCE) < 0) {
 				r->end -= r->start;
 				r->start = 0;
 			}
diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile
index 16a9020c8f1..88112b49f02 100644
--- a/arch/x86/vdso/Makefile
+++ b/arch/x86/vdso/Makefile
@@ -123,6 +123,7 @@ quiet_cmd_vdso = VDSO    $@
 		       -Wl,-T,$(filter %.lds,$^) $(filter %.o,$^)
 
 VDSO_LDFLAGS = -fPIC -shared $(call ld-option, -Wl$(comma)--hash-style=sysv)
+GCOV_PROFILE := n
 
 #
 # Install the unstripped copy of vdso*.so listed in $(vdso-install-y).
diff --git a/arch/xtensa/configs/s6105_defconfig b/arch/xtensa/configs/s6105_defconfig
index 768bee00603..bb84fbc9921 100644
--- a/arch/xtensa/configs/s6105_defconfig
+++ b/arch/xtensa/configs/s6105_defconfig
@@ -263,7 +263,54 @@ CONFIG_HAVE_IDE=y
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_NETDEV_1000=y
+CONFIG_S6GMAC=y
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -304,8 +351,6 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
@@ -387,7 +432,59 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+# CONFIG_RTC_INTF_SYSFS is not set
+# CONFIG_RTC_INTF_PROC is not set
+# CONFIG_RTC_INTF_DEV is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+CONFIG_RTC_DRV_M41T80=y
+# CONFIG_RTC_DRV_M41T80_WDT is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
diff --git a/arch/xtensa/include/asm/cacheflush.h b/arch/xtensa/include/asm/cacheflush.h
index 8fc1c0c8de0..b7b8fbe47c7 100644
--- a/arch/xtensa/include/asm/cacheflush.h
+++ b/arch/xtensa/include/asm/cacheflush.h
@@ -155,5 +155,100 @@ extern void copy_from_user_page(struct vm_area_struct*, struct page*,
 
 #endif
 
+#define XTENSA_CACHEBLK_LOG2	29
+#define XTENSA_CACHEBLK_SIZE	(1 << XTENSA_CACHEBLK_LOG2)
+#define XTENSA_CACHEBLK_MASK	(7 << XTENSA_CACHEBLK_LOG2)
+
+#if XCHAL_HAVE_CACHEATTR
+static inline u32 xtensa_get_cacheattr(void)
+{
+	u32 r;
+	asm volatile("	rsr %0, CACHEATTR" : "=a"(r));
+	return r;
+}
+
+static inline u32 xtensa_get_dtlb1(u32 addr)
+{
+	u32 r = addr & XTENSA_CACHEBLK_MASK;
+	return r | ((xtensa_get_cacheattr() >> (r >> (XTENSA_CACHEBLK_LOG2-2)))
+			& 0xF);
+}
+#else
+static inline u32 xtensa_get_dtlb1(u32 addr)
+{
+	u32 r;
+	asm volatile("	rdtlb1 %0, %1" : "=a"(r) : "a"(addr));
+	asm volatile("	dsync");
+	return r;
+}
+
+static inline u32 xtensa_get_cacheattr(void)
+{
+	u32 r = 0;
+	u32 a = 0;
+	do {
+		a -= XTENSA_CACHEBLK_SIZE;
+		r = (r << 4) | (xtensa_get_dtlb1(a) & 0xF);
+	} while (a);
+	return r;
+}
+#endif
+
+static inline int xtensa_need_flush_dma_source(u32 addr)
+{
+	return (xtensa_get_dtlb1(addr) & ((1 << XCHAL_CA_BITS) - 1)) >= 4;
+}
+
+static inline int xtensa_need_invalidate_dma_destination(u32 addr)
+{
+	return (xtensa_get_dtlb1(addr) & ((1 << XCHAL_CA_BITS) - 1)) != 2;
+}
+
+static inline void flush_dcache_unaligned(u32 addr, u32 size)
+{
+	u32 cnt;
+	if (size) {
+		cnt = (size + ((XCHAL_DCACHE_LINESIZE - 1) & addr)
+			+ XCHAL_DCACHE_LINESIZE - 1) / XCHAL_DCACHE_LINESIZE;
+		while (cnt--) {
+			asm volatile("	dhwb %0, 0" : : "a"(addr));
+			addr += XCHAL_DCACHE_LINESIZE;
+		}
+		asm volatile("	dsync");
+	}
+}
+
+static inline void invalidate_dcache_unaligned(u32 addr, u32 size)
+{
+	int cnt;
+	if (size) {
+		asm volatile("	dhwbi %0, 0 ;" : : "a"(addr));
+		cnt = (size + ((XCHAL_DCACHE_LINESIZE - 1) & addr)
+			- XCHAL_DCACHE_LINESIZE - 1) / XCHAL_DCACHE_LINESIZE;
+		while (cnt-- > 0) {
+			asm volatile("	dhi %0, %1" : : "a"(addr),
+						"n"(XCHAL_DCACHE_LINESIZE));
+			addr += XCHAL_DCACHE_LINESIZE;
+		}
+		asm volatile("	dhwbi %0, %1" : : "a"(addr),
+						"n"(XCHAL_DCACHE_LINESIZE));
+		asm volatile("	dsync");
+	}
+}
+
+static inline void flush_invalidate_dcache_unaligned(u32 addr, u32 size)
+{
+	u32 cnt;
+	if (size) {
+		cnt = (size + ((XCHAL_DCACHE_LINESIZE - 1) & addr)
+			+ XCHAL_DCACHE_LINESIZE - 1) / XCHAL_DCACHE_LINESIZE;
+		while (cnt--) {
+			asm volatile("	dhwbi %0, 0" : : "a"(addr));
+			addr += XCHAL_DCACHE_LINESIZE;
+		}
+		asm volatile("	dsync");
+	}
+}
+
 #endif /* __KERNEL__ */
 #endif /* _XTENSA_CACHEFLUSH_H */
diff --git a/arch/xtensa/include/asm/gpio.h b/arch/xtensa/include/asm/gpio.h
index 0763b076396..a8c9fc46c79 100644
--- a/arch/xtensa/include/asm/gpio.h
+++ b/arch/xtensa/include/asm/gpio.h
@@ -38,14 +38,14 @@ static inline int gpio_cansleep(unsigned int gpio)
 	return __gpio_cansleep(gpio);
 }
 
-/*
- * Not implemented, yet.
- */
 static inline int gpio_to_irq(unsigned int gpio)
 {
-	return -ENOSYS;
+	return __gpio_to_irq(gpio);
 }
 
+/*
+ * Not implemented, yet.
+ */
 static inline int irq_to_gpio(unsigned int irq)
 {
 	return -EINVAL;
diff --git a/arch/xtensa/include/asm/irq.h b/arch/xtensa/include/asm/irq.h
index dfac82dc52a..4c0ccc9c4f4 100644
--- a/arch/xtensa/include/asm/irq.h
+++ b/arch/xtensa/include/asm/irq.h
@@ -11,6 +11,7 @@
 #ifndef _XTENSA_IRQ_H
 #define _XTENSA_IRQ_H
 
+#include <linux/init.h>
 #include <platform/hardware.h>
 #include <variant/core.h>
 
@@ -21,11 +22,20 @@ static inline void variant_irq_enable(unsigned int irq) { }
 static inline void variant_irq_disable(unsigned int irq) { }
 #endif
 
+#ifndef VARIANT_NR_IRQS
+# define VARIANT_NR_IRQS 0
+#endif
 #ifndef PLATFORM_NR_IRQS
 # define PLATFORM_NR_IRQS 0
 #endif
 #define XTENSA_NR_IRQS XCHAL_NUM_INTERRUPTS
-#define NR_IRQS (XTENSA_NR_IRQS + PLATFORM_NR_IRQS)
+#define NR_IRQS (XTENSA_NR_IRQS + VARIANT_NR_IRQS + PLATFORM_NR_IRQS)
+
+#if VARIANT_NR_IRQS == 0
+static inline void variant_init_irq(void) { }
+#else
+void variant_init_irq(void) __init;
+#endif
 
 static __inline__ int irq_canonicalize(int irq)
 {
diff --git a/arch/xtensa/kernel/irq.c b/arch/xtensa/kernel/irq.c
index a36c85edd04..a1badb32fcd 100644
--- a/arch/xtensa/kernel/irq.c
+++ b/arch/xtensa/kernel/irq.c
@@ -197,4 +197,6 @@ void __init init_IRQ(void)
 	}
 
 	cached_irq_mask = 0;
+
+	variant_init_irq();
 }
diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c
index 031f3668571..e1a04a346e7 100644
--- a/arch/xtensa/kernel/process.c
+++ b/arch/xtensa/kernel/process.c
@@ -331,11 +331,6 @@ long xtensa_execve(char __user *name, char __user * __user *argv,
 	if (IS_ERR(filename))
 		goto out;
 	error = do_execve(filename, argv, envp, regs);
-	if (error == 0) {
-		task_lock(current);
-		current->ptrace &= ~PT_DTRACE;
-		task_unlock(current);
-	}
 	putname(filename);
 out:
 	return error;
diff --git a/arch/xtensa/mm/fault.c b/arch/xtensa/mm/fault.c
index bdd860d93f7..bc0733359a8 100644
--- a/arch/xtensa/mm/fault.c
+++ b/arch/xtensa/mm/fault.c
@@ -106,7 +106,7 @@ good_area:
 	 * the fault.
 	 */
 survive:
-	fault = handle_mm_fault(mm, vma, address, is_write);
+	fault = handle_mm_fault(mm, vma, address, is_write ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
diff --git a/arch/xtensa/platforms/s6105/device.c b/arch/xtensa/platforms/s6105/device.c
index 78b08be5a92..65333ffefb0 100644
--- a/arch/xtensa/platforms/s6105/device.c
+++ b/arch/xtensa/platforms/s6105/device.c
@@ -5,14 +5,27 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/phy.h>
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/serial_8250.h>
 
 #include <variant/hardware.h>
+#include <variant/dmac.h>
 
+#include <platform/gpio.h>
+
+#define GPIO3_INTNUM		3
 #define UART_INTNUM		4
+#define GMAC_INTNUM		5
+
+static const signed char gpio3_irq_mappings[] = {
+	S6_INTC_GPIO(3),
+	-1
+};
 
 static const signed char uart_irq_mappings[] = {
 	S6_INTC_UART(0),
@@ -20,8 +33,18 @@ static const signed char uart_irq_mappings[] = {
 	-1,
 };
 
+static const signed char gmac_irq_mappings[] = {
+	S6_INTC_GMAC_STAT,
+	S6_INTC_GMAC_ERR,
+	S6_INTC_DMA_HOSTTERMCNT(0),
+	S6_INTC_DMA_HOSTTERMCNT(1),
+	-1
+};
+
 const signed char *platform_irq_mappings[NR_IRQS] = {
+	[GPIO3_INTNUM] = gpio3_irq_mappings,
 	[UART_INTNUM] = uart_irq_mappings,
+	[GMAC_INTNUM] = gmac_irq_mappings,
 };
 
 static struct plat_serial8250_port serial_platform_data[] = {
@@ -46,6 +69,66 @@ static struct plat_serial8250_port serial_platform_data[] = {
 	{ },
 };
 
+static struct resource s6_gmac_resource[] = {
+	{
+		.name   = "mem",
+		.start  = (resource_size_t)S6_REG_GMAC,
+		.end    = (resource_size_t)S6_REG_GMAC + 0x10000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "dma",
+		.start  = (resource_size_t)
+			DMA_CHNL(S6_REG_HIFDMA, S6_HIFDMA_GMACTX),
+		.end    = (resource_size_t)
+			DMA_CHNL(S6_REG_HIFDMA, S6_HIFDMA_GMACTX) + 0x100 - 1,
+		.flags  = IORESOURCE_DMA,
+	},
+	{
+		.name   = "dma",
+		.start  = (resource_size_t)
+			DMA_CHNL(S6_REG_HIFDMA, S6_HIFDMA_GMACRX),
+		.end    = (resource_size_t)
+			DMA_CHNL(S6_REG_HIFDMA, S6_HIFDMA_GMACRX) + 0x100 - 1,
+		.flags  = IORESOURCE_DMA,
+	},
+	{
+		.name   = "io",
+		.start  = (resource_size_t)S6_MEM_GMAC,
+		.end    = (resource_size_t)S6_MEM_GMAC + 0x2000000 - 1,
+		.flags  = IORESOURCE_IO,
+	},
+	{
+		.name   = "irq",
+		.start  = (resource_size_t)GMAC_INTNUM,
+		.flags  = IORESOURCE_IRQ,
+	},
+	{
+		.name   = "irq",
+		.start  = (resource_size_t)PHY_POLL,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static int __init prepare_phy_irq(int pin)
+{
+	int irq;
+	if (gpio_request(pin, "s6gmac_phy") < 0)
+		goto fail;
+	if (gpio_direction_input(pin) < 0)
+		goto free;
+	irq = gpio_to_irq(pin);
+	if (irq < 0)
+		goto free;
+	if (set_irq_type(irq, IRQ_TYPE_LEVEL_LOW) < 0)
+		goto free;
+	return irq;
+free:
+	gpio_free(pin);
+fail:
+	return PHY_POLL;
+}
+
 static struct platform_device platform_devices[] = {
 	{
 		.name = "serial8250",
@@ -54,12 +137,23 @@ static struct platform_device platform_devices[] = {
 			.platform_data = serial_platform_data,
 		},
 	},
+	{
+		.name = "s6gmac",
+		.id = 0,
+		.resource = s6_gmac_resource,
+		.num_resources = ARRAY_SIZE(s6_gmac_resource),
+	},
+	{
+		I2C_BOARD_INFO("m41t62", S6I2C_ADDR_M41T62),
+	},
 };
 
 static int __init device_init(void)
 {
 	int i;
 
+	s6_gmac_resource[5].start = prepare_phy_irq(GPIO_PHY_IRQ);
+
 	for (i = 0; i < ARRAY_SIZE(platform_devices); i++)
 		platform_device_register(&platform_devices[i]);
 	return 0;
diff --git a/arch/xtensa/platforms/s6105/setup.c b/arch/xtensa/platforms/s6105/setup.c
index 855ddeadc43..86ce730f791 100644
--- a/arch/xtensa/platforms/s6105/setup.c
+++ b/arch/xtensa/platforms/s6105/setup.c
@@ -35,12 +35,21 @@ void __init platform_setup(char **cmdline)
 {
 	unsigned long reg;
 
+	reg = readl(S6_REG_GREG1 + S6_GREG1_PLLSEL);
+	reg &= ~(S6_GREG1_PLLSEL_GMAC_MASK << S6_GREG1_PLLSEL_GMAC |
+		S6_GREG1_PLLSEL_GMII_MASK << S6_GREG1_PLLSEL_GMII);
+	reg |= S6_GREG1_PLLSEL_GMAC_125MHZ << S6_GREG1_PLLSEL_GMAC |
+		S6_GREG1_PLLSEL_GMII_125MHZ << S6_GREG1_PLLSEL_GMII;
+	writel(reg, S6_REG_GREG1 + S6_GREG1_PLLSEL);
+
 	reg = readl(S6_REG_GREG1 + S6_GREG1_CLKGATE);
 	reg &= ~(1 << S6_GREG1_BLOCK_SB);
+	reg &= ~(1 << S6_GREG1_BLOCK_GMAC);
 	writel(reg, S6_REG_GREG1 + S6_GREG1_CLKGATE);
 
 	reg = readl(S6_REG_GREG1 + S6_GREG1_BLOCKENA);
 	reg |= 1 << S6_GREG1_BLOCK_SB;
+	reg |= 1 << S6_GREG1_BLOCK_GMAC;
 	writel(reg, S6_REG_GREG1 + S6_GREG1_BLOCKENA);
 
 	printk(KERN_NOTICE "S6105 on Stretch S6000 - "
@@ -49,7 +58,7 @@ void __init platform_setup(char **cmdline)
 
 void __init platform_init(bp_tag_t *first)
 {
-	s6_gpio_init();
+	s6_gpio_init(0);
 	gpio_request(GPIO_LED1_NGREEN, "led1_green");
 	gpio_request(GPIO_LED1_RED, "led1_red");
 	gpio_direction_output(GPIO_LED1_NGREEN, 1);
diff --git a/arch/xtensa/variants/s6000/Makefile b/arch/xtensa/variants/s6000/Makefile
index d83f3805130..3e7ef0a0c49 100644
--- a/arch/xtensa/variants/s6000/Makefile
+++ b/arch/xtensa/variants/s6000/Makefile
@@ -1,4 +1,4 @@
 # s6000 Makefile
 
-obj-y		+= irq.o gpio.o
+obj-y		+= irq.o gpio.o dmac.o
 obj-$(CONFIG_XTENSA_CALIBRATE_CCOUNT)	+= delay.o
diff --git a/arch/xtensa/variants/s6000/dmac.c b/arch/xtensa/variants/s6000/dmac.c
new file mode 100644
index 00000000000..dc7f7c57351
--- /dev/null
+++ b/arch/xtensa/variants/s6000/dmac.c
@@ -0,0 +1,173 @@
+/*
+ * Authors:	Oskar Schirmer <os@emlix.com>
+ *		Daniel Gloeckner <dg@emlix.com>
+ * (c) 2008 emlix GmbH http://www.emlix.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <asm/cacheflush.h>
+#include <variant/dmac.h>
+
+/* DMA engine lookup */
+
+struct s6dmac_ctrl s6dmac_ctrl[S6_DMAC_NB];
+
+
+/* DMA control, per engine */
+
+void s6dmac_put_fifo_cache(u32 dmac, int chan, u32 src, u32 dst, u32 size)
+{
+	if (xtensa_need_flush_dma_source(src)) {
+		u32 base = src;
+		u32 span = size;
+		u32 chunk = readl(DMA_CHNL(dmac, chan) + S6_DMA_CMONCHUNK);
+		if (chunk && (size > chunk)) {
+			s32 skip =
+				readl(DMA_CHNL(dmac, chan) + S6_DMA_SRCSKIP);
+			u32 gaps = (size+chunk-1)/chunk - 1;
+			if (skip >= 0) {
+				span += gaps * skip;
+			} else if (-skip > chunk) {
+				s32 decr = gaps * (chunk + skip);
+				base += decr;
+				span = chunk - decr;
+			} else {
+				span = max(span + gaps * skip,
+					(chunk + skip) * gaps - skip);
+			}
+		}
+		flush_dcache_unaligned(base, span);
+	}
+	if (xtensa_need_invalidate_dma_destination(dst)) {
+		u32 base = dst;
+		u32 span = size;
+		u32 chunk = readl(DMA_CHNL(dmac, chan) + S6_DMA_CMONCHUNK);
+		if (chunk && (size > chunk)) {
+			s32 skip =
+				readl(DMA_CHNL(dmac, chan) + S6_DMA_DSTSKIP);
+			u32 gaps = (size+chunk-1)/chunk - 1;
+			if (skip >= 0) {
+				span += gaps * skip;
+			} else if (-skip > chunk) {
+				s32 decr = gaps * (chunk + skip);
+				base += decr;
+				span = chunk - decr;
+			} else {
+				span = max(span + gaps * skip,
+					(chunk + skip) * gaps - skip);
+			}
+		}
+		invalidate_dcache_unaligned(base, span);
+	}
+	s6dmac_put_fifo(dmac, chan, src, dst, size);
+}
+
+void s6dmac_disable_error_irqs(u32 dmac, u32 mask)
+{
+	unsigned long flags;
+	spinlock_t *spinl = &s6dmac_ctrl[_dmac_addr_index(dmac)].lock;
+	spin_lock_irqsave(spinl, flags);
+	_s6dmac_disable_error_irqs(dmac, mask);
+	spin_unlock_irqrestore(spinl, flags);
+}
+
+u32 s6dmac_int_sources(u32 dmac, u32 channel)
+{
+	u32 mask, ret, tmp;
+	mask = 1 << channel;
+
+	tmp = readl(dmac + S6_DMA_TERMCNTIRQSTAT);
+	tmp &= mask;
+	writel(tmp, dmac + S6_DMA_TERMCNTIRQCLR);
+	ret = tmp >> channel;
+
+	tmp = readl(dmac + S6_DMA_PENDCNTIRQSTAT);
+	tmp &= mask;
+	writel(tmp, dmac + S6_DMA_PENDCNTIRQCLR);
+	ret |= (tmp >> channel) << 1;
+
+	tmp = readl(dmac + S6_DMA_LOWWMRKIRQSTAT);
+	tmp &= mask;
+	writel(tmp, dmac + S6_DMA_LOWWMRKIRQCLR);
+	ret |= (tmp >> channel) << 2;
+
+	tmp = readl(dmac + S6_DMA_INTRAW0);
+	tmp &= (mask << S6_DMA_INT0_OVER) | (mask << S6_DMA_INT0_UNDER);
+	writel(tmp, dmac + S6_DMA_INTCLEAR0);
+
+	if (tmp & (mask << S6_DMA_INT0_UNDER))
+		ret |= 1 << 3;
+	if (tmp & (mask << S6_DMA_INT0_OVER))
+		ret |= 1 << 4;
+
+	tmp = readl(dmac + S6_DMA_MASTERERRINFO);
+	mask <<= S6_DMA_INT1_CHANNEL;
+	if (((tmp >> S6_DMA_MASTERERR_CHAN(0)) & S6_DMA_MASTERERR_CHAN_MASK)
+			== channel)
+		mask |= 1 << S6_DMA_INT1_MASTER;
+	if (((tmp >> S6_DMA_MASTERERR_CHAN(1)) & S6_DMA_MASTERERR_CHAN_MASK)
+			== channel)
+		mask |= 1 << (S6_DMA_INT1_MASTER + 1);
+	if (((tmp >> S6_DMA_MASTERERR_CHAN(2)) & S6_DMA_MASTERERR_CHAN_MASK)
+			== channel)
+		mask |= 1 << (S6_DMA_INT1_MASTER + 2);
+
+	tmp = readl(dmac + S6_DMA_INTRAW1) & mask;
+	writel(tmp, dmac + S6_DMA_INTCLEAR1);
+	ret |= ((tmp >> channel) & 1) << 5;
+	ret |= ((tmp >> S6_DMA_INT1_MASTER) & S6_DMA_INT1_MASTER_MASK) << 6;
+
+	return ret;
+}
+
+void s6dmac_release_chan(u32 dmac, int chan)
+{
+	if (chan >= 0)
+		s6dmac_disable_chan(dmac, chan);
+}
+
+
+/* global init */
+
+static inline void __init dmac_init(u32 dmac, u8 chan_nb)
+{
+	s6dmac_ctrl[S6_DMAC_INDEX(dmac)].dmac = dmac;
+	spin_lock_init(&s6dmac_ctrl[S6_DMAC_INDEX(dmac)].lock);
+	s6dmac_ctrl[S6_DMAC_INDEX(dmac)].chan_nb = chan_nb;
+	writel(S6_DMA_INT1_MASTER_MASK << S6_DMA_INT1_MASTER,
+		dmac + S6_DMA_INTCLEAR1);
+}
+
+static inline void __init dmac_master(u32 dmac,
+	u32 m0start, u32 m0end, u32 m1start, u32 m1end)
+{
+	writel(m0start, dmac + S6_DMA_MASTER0START);
+	writel(m0end - 1, dmac + S6_DMA_MASTER0END);
+	writel(m1start, dmac + S6_DMA_MASTER1START);
+	writel(m1end - 1, dmac + S6_DMA_MASTER1END);
+}
+
+static void __init s6_dmac_init(void)
+{
+	dmac_init(S6_REG_LMSDMA, S6_LMSDMA_NB);
+	dmac_master(S6_REG_LMSDMA,
+		S6_MEM_DDR, S6_MEM_PCIE_APER, S6_MEM_EFI, S6_MEM_GMAC);
+	dmac_init(S6_REG_NIDMA, S6_NIDMA_NB);
+	dmac_init(S6_REG_DPDMA, S6_DPDMA_NB);
+	dmac_master(S6_REG_DPDMA,
+		S6_MEM_DDR, S6_MEM_PCIE_APER, S6_REG_DP, S6_REG_DPDMA);
+	dmac_init(S6_REG_HIFDMA, S6_HIFDMA_NB);
+	dmac_master(S6_REG_HIFDMA,
+		S6_MEM_GMAC, S6_MEM_PCIE_CFG, S6_MEM_PCIE_APER, S6_MEM_AUX);
+}
+
+arch_initcall(s6_dmac_init);
diff --git a/arch/xtensa/variants/s6000/gpio.c b/arch/xtensa/variants/s6000/gpio.c
index 79317fdcf14..380a70fff75 100644
--- a/arch/xtensa/variants/s6000/gpio.c
+++ b/arch/xtensa/variants/s6000/gpio.c
@@ -4,15 +4,20 @@
  * Copyright (c) 2009 emlix GmbH
  * Authors:	Oskar Schirmer <os@emlix.com>
  *		Johannes Weiner <jw@emlix.com>
+ *		Daniel Gloeckner <dg@emlix.com>
  */
+#include <linux/bitops.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/irq.h>
 #include <linux/gpio.h>
 
 #include <variant/hardware.h>
 
+#define IRQ_BASE XTENSA_NR_IRQS
+
 #define S6_GPIO_DATA		0x000
 #define S6_GPIO_IS		0x404
 #define S6_GPIO_IBE		0x408
@@ -52,19 +57,175 @@ static void set(struct gpio_chip *chip, unsigned int off, int val)
 	writeb(val ? ~0 : 0, S6_REG_GPIO + S6_GPIO_DATA + S6_GPIO_OFFSET(off));
 }
 
+static int to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	if (offset < 8)
+		return offset + IRQ_BASE;
+	return -EINVAL;
+}
+
 static struct gpio_chip gpiochip = {
 	.owner = THIS_MODULE,
 	.direction_input = direction_input,
 	.get = get,
 	.direction_output = direction_output,
 	.set = set,
+	.to_irq = to_irq,
 	.base = 0,
 	.ngpio = 24,
 	.can_sleep = 0, /* no blocking io needed */
 	.exported = 0, /* no exporting to userspace */
 };
 
-int s6_gpio_init(void)
+int s6_gpio_init(u32 afsel)
 {
+	writeb(afsel, S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_AFSEL);
+	writeb(afsel >> 8, S6_REG_GPIO + S6_GPIO_BANK(1) + S6_GPIO_AFSEL);
+	writeb(afsel >> 16, S6_REG_GPIO + S6_GPIO_BANK(2) + S6_GPIO_AFSEL);
 	return gpiochip_add(&gpiochip);
 }
+
+static void ack(unsigned int irq)
+{
+	writeb(1 << (irq - IRQ_BASE), S6_REG_GPIO + S6_GPIO_IC);
+}
+
+static void mask(unsigned int irq)
+{
+	u8 r = readb(S6_REG_GPIO + S6_GPIO_IE);
+	r &= ~(1 << (irq - IRQ_BASE));
+	writeb(r, S6_REG_GPIO + S6_GPIO_IE);
+}
+
+static void unmask(unsigned int irq)
+{
+	u8 m = readb(S6_REG_GPIO + S6_GPIO_IE);
+	m |= 1 << (irq - IRQ_BASE);
+	writeb(m, S6_REG_GPIO + S6_GPIO_IE);
+}
+
+static int set_type(unsigned int irq, unsigned int type)
+{
+	const u8 m = 1 << (irq - IRQ_BASE);
+	irq_flow_handler_t handler;
+	struct irq_desc *desc;
+	u8 reg;
+
+	if (type == IRQ_TYPE_PROBE) {
+		if ((readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_AFSEL) & m)
+		    || (readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IE) & m)
+		    || readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_DIR
+			      + S6_GPIO_MASK(irq - IRQ_BASE)))
+			return 0;
+		type = IRQ_TYPE_EDGE_BOTH;
+	}
+
+	reg = readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IS);
+	if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) {
+		reg |= m;
+		handler = handle_level_irq;
+	} else {
+		reg &= ~m;
+		handler = handle_edge_irq;
+	}
+	writeb(reg, S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IS);
+	desc = irq_to_desc(irq);
+	desc->handle_irq = handler;
+
+	reg = readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IEV);
+	if (type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING))
+		reg |= m;
+	else
+		reg &= ~m;
+	writeb(reg, S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IEV);
+
+	reg = readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IBE);
+	if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH)
+		reg |= m;
+	else
+		reg &= ~m;
+	writeb(reg, S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IBE);
+	return 0;
+}
+
+static struct irq_chip gpioirqs = {
+	.name = "GPIO",
+	.ack = ack,
+	.mask = mask,
+	.unmask = unmask,
+	.set_type = set_type,
+};
+
+static u8 demux_masks[4];
+
+static void demux_irqs(unsigned int irq, struct irq_desc *desc)
+{
+	u8 *mask = get_irq_desc_data(desc);
+	u8 pending;
+	int cirq;
+
+	desc->chip->mask(irq);
+	desc->chip->ack(irq);
+	pending = readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_MIS) & *mask;
+	cirq = IRQ_BASE - 1;
+	while (pending) {
+		int n = ffs(pending);
+		cirq += n;
+		pending >>= n;
+		generic_handle_irq(cirq);
+	}
+	desc->chip->unmask(irq);
+}
+
+extern const signed char *platform_irq_mappings[XTENSA_NR_IRQS];
+
+void __init variant_init_irq(void)
+{
+	int irq, n;
+	writeb(0, S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IE);
+	for (irq = n = 0; irq < XTENSA_NR_IRQS; irq++) {
+		const signed char *mapping = platform_irq_mappings[irq];
+		int alone = 1;
+		u8 mask;
+		if (!mapping)
+			continue;
+		for(mask = 0; *mapping != -1; mapping++)
+			switch (*mapping) {
+			case S6_INTC_GPIO(0):
+				mask |= 1 << 0;
+				break;
+			case S6_INTC_GPIO(1):
+				mask |= 1 << 1;
+				break;
+			case S6_INTC_GPIO(2):
+				mask |= 1 << 2;
+				break;
+			case S6_INTC_GPIO(3):
+				mask |= 0x1f << 3;
+				break;
+			default:
+				alone = 0;
+			}
+		if (mask) {
+			int cirq, i;
+			if (!alone) {
+				printk(KERN_ERR "chained irq chips can't share"
+					" parent irq %i\n", irq);
+				continue;
+			}
+			demux_masks[n] = mask;
+			cirq = IRQ_BASE - 1;
+			do {
+				i = ffs(mask);
+				cirq += i;
+				mask >>= i;
+				set_irq_chip(cirq, &gpioirqs);
+				set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
+			} while (mask);
+			set_irq_data(irq, demux_masks + n);
+			set_irq_chained_handler(irq, demux_irqs);
+			if (++n == ARRAY_SIZE(demux_masks))
+				break;
+		}
+	}
+}
diff --git a/arch/xtensa/variants/s6000/include/variant/dmac.h b/arch/xtensa/variants/s6000/include/variant/dmac.h
new file mode 100644
index 00000000000..89ab9484fb7
--- /dev/null
+++ b/arch/xtensa/variants/s6000/include/variant/dmac.h
@@ -0,0 +1,387 @@
+/*
+ * include/asm-xtensa/variant-s6000/dmac.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 Tensilica Inc.
+ * Copyright (C) 2008 Emlix GmbH <info@emlix.com>
+ * Authors:	Fabian Godehardt <fg@emlix.com>
+ *		Oskar Schirmer <os@emlix.com>
+ *		Daniel Gloeckner <dg@emlix.com>
+ */
+
+#ifndef __ASM_XTENSA_S6000_DMAC_H
+#define __ASM_XTENSA_S6000_DMAC_H
+#include <linux/io.h>
+#include <variant/hardware.h>
+
+/* DMA global */
+
+#define S6_DMA_INTSTAT0		0x000
+#define S6_DMA_INTSTAT1		0x004
+#define S6_DMA_INTENABLE0	0x008
+#define S6_DMA_INTENABLE1	0x00C
+#define S6_DMA_INTRAW0		0x010
+#define S6_DMA_INTRAW1		0x014
+#define S6_DMA_INTCLEAR0	0x018
+#define S6_DMA_INTCLEAR1	0x01C
+#define S6_DMA_INTSET0		0x020
+#define S6_DMA_INTSET1		0x024
+#define S6_DMA_INT0_UNDER		0
+#define S6_DMA_INT0_OVER		16
+#define S6_DMA_INT1_CHANNEL		0
+#define S6_DMA_INT1_MASTER		16
+#define S6_DMA_INT1_MASTER_MASK			7
+#define S6_DMA_TERMCNTIRQSTAT	0x028
+#define S6_DMA_TERMCNTIRQCLR	0x02C
+#define S6_DMA_TERMCNTIRQSET	0x030
+#define S6_DMA_PENDCNTIRQSTAT	0x034
+#define S6_DMA_PENDCNTIRQCLR	0x038
+#define S6_DMA_PENDCNTIRQSET	0x03C
+#define S6_DMA_LOWWMRKIRQSTAT	0x040
+#define S6_DMA_LOWWMRKIRQCLR	0x044
+#define S6_DMA_LOWWMRKIRQSET	0x048
+#define S6_DMA_MASTERERRINFO	0x04C
+#define S6_DMA_MASTERERR_CHAN(n)	(4*(n))
+#define S6_DMA_MASTERERR_CHAN_MASK		0xF
+#define S6_DMA_DESCRFIFO0	0x050
+#define S6_DMA_DESCRFIFO1	0x054
+#define S6_DMA_DESCRFIFO2	0x058
+#define S6_DMA_DESCRFIFO2_AUTODISABLE	24
+#define S6_DMA_DESCRFIFO3	0x05C
+#define S6_DMA_MASTER0START	0x060
+#define S6_DMA_MASTER0END	0x064
+#define S6_DMA_MASTER1START	0x068
+#define S6_DMA_MASTER1END	0x06C
+#define S6_DMA_NEXTFREE		0x070
+#define S6_DMA_NEXTFREE_CHAN		0
+#define S6_DMA_NEXTFREE_CHAN_MASK	0x1F
+#define S6_DMA_NEXTFREE_ENA		16
+#define S6_DMA_NEXTFREE_ENA_MASK	((1 << 16) - 1)
+#define S6_DMA_DPORTCTRLGRP(p)	((p) * 4 + 0x074)
+#define S6_DMA_DPORTCTRLGRP_FRAMEREP	0
+#define S6_DMA_DPORTCTRLGRP_NRCHANS	1
+#define S6_DMA_DPORTCTRLGRP_NRCHANS_1		0
+#define S6_DMA_DPORTCTRLGRP_NRCHANS_3		1
+#define S6_DMA_DPORTCTRLGRP_NRCHANS_4		2
+#define S6_DMA_DPORTCTRLGRP_NRCHANS_2		3
+#define S6_DMA_DPORTCTRLGRP_ENA		31
+
+
+/* DMA per channel */
+
+#define DMA_CHNL(dmac, n)	((dmac) + 0x1000 + (n) * 0x100)
+#define DMA_INDEX_CHNL(addr)	(((addr) >> 8) & 0xF)
+#define DMA_MASK_DMAC(addr)	((addr) & 0xFFFF0000)
+#define S6_DMA_CHNCTRL		0x000
+#define S6_DMA_CHNCTRL_ENABLE		0
+#define S6_DMA_CHNCTRL_PAUSE		1
+#define S6_DMA_CHNCTRL_PRIO		2
+#define S6_DMA_CHNCTRL_PRIO_MASK		3
+#define S6_DMA_CHNCTRL_PERIPHXFER	4
+#define S6_DMA_CHNCTRL_PERIPHENA	5
+#define S6_DMA_CHNCTRL_SRCINC		6
+#define S6_DMA_CHNCTRL_DSTINC		7
+#define S6_DMA_CHNCTRL_BURSTLOG		8
+#define S6_DMA_CHNCTRL_BURSTLOG_MASK		7
+#define S6_DMA_CHNCTRL_DESCFIFODEPTH	12
+#define S6_DMA_CHNCTRL_DESCFIFODEPTH_MASK	0x1F
+#define S6_DMA_CHNCTRL_DESCFIFOFULL	17
+#define S6_DMA_CHNCTRL_BWCONSEL		18
+#define S6_DMA_CHNCTRL_BWCONENA		19
+#define S6_DMA_CHNCTRL_PENDGCNTSTAT	20
+#define S6_DMA_CHNCTRL_PENDGCNTSTAT_MASK	0x3F
+#define S6_DMA_CHNCTRL_LOWWMARK		26
+#define S6_DMA_CHNCTRL_LOWWMARK_MASK		0xF
+#define S6_DMA_CHNCTRL_TSTAMP		30
+#define S6_DMA_TERMCNTNB	0x004
+#define S6_DMA_TERMCNTNB_MASK			0xFFFF
+#define S6_DMA_TERMCNTTMO	0x008
+#define S6_DMA_TERMCNTSTAT	0x00C
+#define S6_DMA_TERMCNTSTAT_MASK		0xFF
+#define S6_DMA_CMONCHUNK	0x010
+#define S6_DMA_SRCSKIP		0x014
+#define S6_DMA_DSTSKIP		0x018
+#define S6_DMA_CUR_SRC		0x024
+#define S6_DMA_CUR_DST		0x028
+#define S6_DMA_TIMESTAMP	0x030
+
+/* DMA channel lists */
+
+#define S6_DPDMA_CHAN(stream, channel)	(4 * (stream) + (channel))
+#define S6_DPDMA_NB	16
+
+#define S6_HIFDMA_GMACTX	0
+#define S6_HIFDMA_GMACRX	1
+#define S6_HIFDMA_I2S0		2
+#define S6_HIFDMA_I2S1		3
+#define S6_HIFDMA_EGIB		4
+#define S6_HIFDMA_PCITX		5
+#define S6_HIFDMA_PCIRX		6
+#define S6_HIFDMA_NB	7
+
+#define S6_NIDMA_NB	4
+
+#define S6_LMSDMA_NB	12
+
+/* controller access */
+
+#define S6_DMAC_NB	4
+#define S6_DMAC_INDEX(dmac)	(((unsigned)(dmac) >> 18) % S6_DMAC_NB)
+
+struct s6dmac_ctrl {
+	u32 dmac;
+	spinlock_t lock;
+	u8 chan_nb;
+};
+
+extern struct s6dmac_ctrl s6dmac_ctrl[S6_DMAC_NB];
+
+
+/* DMA control, per channel */
+
+static inline int s6dmac_fifo_full(u32 dmac, int chan)
+{
+	return (readl(DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL)
+		& (1 << S6_DMA_CHNCTRL_DESCFIFOFULL)) && 1;
+}
+
+static inline int s6dmac_termcnt_irq(u32 dmac, int chan)
+{
+	u32 m = 1 << chan;
+	int r = (readl(dmac + S6_DMA_TERMCNTIRQSTAT) & m) && 1;
+	if (r)
+		writel(m, dmac + S6_DMA_TERMCNTIRQCLR);
+	return r;
+}
+
+static inline int s6dmac_pendcnt_irq(u32 dmac, int chan)
+{
+	u32 m = 1 << chan;
+	int r = (readl(dmac + S6_DMA_PENDCNTIRQSTAT) & m) && 1;
+	if (r)
+		writel(m, dmac + S6_DMA_PENDCNTIRQCLR);
+	return r;
+}
+
+static inline int s6dmac_lowwmark_irq(u32 dmac, int chan)
+{
+	int r = (readl(dmac + S6_DMA_LOWWMRKIRQSTAT) & (1 << chan)) ? 1 : 0;
+	if (r)
+		writel(1 << chan, dmac + S6_DMA_LOWWMRKIRQCLR);
+	return r;
+}
+
+static inline u32 s6dmac_pending_count(u32 dmac, int chan)
+{
+	return (readl(DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL)
+			>> S6_DMA_CHNCTRL_PENDGCNTSTAT)
+		& S6_DMA_CHNCTRL_PENDGCNTSTAT_MASK;
+}
+
+static inline void s6dmac_set_terminal_count(u32 dmac, int chan, u32 n)
+{
+	n &= S6_DMA_TERMCNTNB_MASK;
+	n |= readl(DMA_CHNL(dmac, chan) + S6_DMA_TERMCNTNB)
+	      & ~S6_DMA_TERMCNTNB_MASK;
+	writel(n, DMA_CHNL(dmac, chan) + S6_DMA_TERMCNTNB);
+}
+
+static inline u32 s6dmac_get_terminal_count(u32 dmac, int chan)
+{
+	return (readl(DMA_CHNL(dmac, chan) + S6_DMA_TERMCNTNB))
+		& S6_DMA_TERMCNTNB_MASK;
+}
+
+static inline u32 s6dmac_timestamp(u32 dmac, int chan)
+{
+	return readl(DMA_CHNL(dmac, chan) + S6_DMA_TIMESTAMP);
+}
+
+static inline u32 s6dmac_cur_src(u32 dmac, int chan)
+{
+	return readl(DMA_CHNL(dmac, chan) + S6_DMA_CUR_SRC);
+}
+
+static inline u32 s6dmac_cur_dst(u32 dmac, int chan)
+{
+	return readl(DMA_CHNL(dmac, chan) + S6_DMA_CUR_DST);
+}
+
+static inline void s6dmac_disable_chan(u32 dmac, int chan)
+{
+	u32 ctrl;
+	writel(readl(DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL)
+		& ~(1 << S6_DMA_CHNCTRL_ENABLE),
+		DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL);
+	do
+		ctrl = readl(DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL);
+	while (ctrl & (1 << S6_DMA_CHNCTRL_ENABLE));
+}
+
+static inline void s6dmac_set_stride_skip(u32 dmac, int chan,
+	int comchunk,		/* 0: disable scatter/gather */
+	int srcskip, int dstskip)
+{
+	writel(comchunk, DMA_CHNL(dmac, chan) + S6_DMA_CMONCHUNK);
+	writel(srcskip, DMA_CHNL(dmac, chan) + S6_DMA_SRCSKIP);
+	writel(dstskip, DMA_CHNL(dmac, chan) + S6_DMA_DSTSKIP);
+}
+
+static inline void s6dmac_enable_chan(u32 dmac, int chan,
+	int prio,               /* 0 (highest) .. 3 (lowest) */
+	int periphxfer,         /* <0: disable p.req.line, 0..1: mode */
+	int srcinc, int dstinc, /* 0: dont increment src/dst address */
+	int comchunk,		/* 0: disable scatter/gather */
+	int srcskip, int dstskip,
+	int burstsize,		/* 4 for I2S, 7 for everything else */
+	int bandwidthconserve,  /* <0: disable, 0..1: select */
+	int lowwmark,           /* 0..15 */
+	int timestamp,		/* 0: disable timestamp */
+	int enable)		/* 0: disable for now */
+{
+	writel(1, DMA_CHNL(dmac, chan) + S6_DMA_TERMCNTNB);
+	writel(0, DMA_CHNL(dmac, chan) + S6_DMA_TERMCNTTMO);
+	writel(lowwmark << S6_DMA_CHNCTRL_LOWWMARK,
+		DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL);
+	s6dmac_set_stride_skip(dmac, chan, comchunk, srcskip, dstskip);
+	writel(((enable ? 1 : 0) << S6_DMA_CHNCTRL_ENABLE) |
+		(prio << S6_DMA_CHNCTRL_PRIO) |
+		(((periphxfer > 0) ? 1 : 0) << S6_DMA_CHNCTRL_PERIPHXFER) |
+		(((periphxfer < 0) ? 0 : 1) << S6_DMA_CHNCTRL_PERIPHENA) |
+		((srcinc ? 1 : 0) << S6_DMA_CHNCTRL_SRCINC) |
+		((dstinc ? 1 : 0) << S6_DMA_CHNCTRL_DSTINC) |
+		(burstsize << S6_DMA_CHNCTRL_BURSTLOG) |
+		(((bandwidthconserve > 0) ? 1 : 0) << S6_DMA_CHNCTRL_BWCONSEL) |
+		(((bandwidthconserve < 0) ? 0 : 1) << S6_DMA_CHNCTRL_BWCONENA) |
+		(lowwmark << S6_DMA_CHNCTRL_LOWWMARK) |
+		((timestamp ? 1 : 0) << S6_DMA_CHNCTRL_TSTAMP),
+		DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL);
+}
+
+
+/* DMA control, per engine */
+
+static inline unsigned _dmac_addr_index(u32 dmac)
+{
+	unsigned i = S6_DMAC_INDEX(dmac);
+	if (s6dmac_ctrl[i].dmac != dmac)
+		BUG();
+	return i;
+}
+
+static inline void _s6dmac_disable_error_irqs(u32 dmac, u32 mask)
+{
+	writel(mask, dmac + S6_DMA_TERMCNTIRQCLR);
+	writel(mask, dmac + S6_DMA_PENDCNTIRQCLR);
+	writel(mask, dmac + S6_DMA_LOWWMRKIRQCLR);
+	writel(readl(dmac + S6_DMA_INTENABLE0)
+		& ~((mask << S6_DMA_INT0_UNDER) | (mask << S6_DMA_INT0_OVER)),
+		dmac + S6_DMA_INTENABLE0);
+	writel(readl(dmac + S6_DMA_INTENABLE1) & ~(mask << S6_DMA_INT1_CHANNEL),
+		dmac + S6_DMA_INTENABLE1);
+	writel((mask << S6_DMA_INT0_UNDER) | (mask << S6_DMA_INT0_OVER),
+		dmac + S6_DMA_INTCLEAR0);
+	writel(mask << S6_DMA_INT1_CHANNEL, dmac + S6_DMA_INTCLEAR1);
+}
+
+/*
+ * request channel from specified engine
+ * with chan<0, accept any channel
+ * further parameters see s6dmac_enable_chan
+ * returns < 0 upon error, channel nb otherwise
+ */
+static inline int s6dmac_request_chan(u32 dmac, int chan,
+	int prio,
+	int periphxfer,
+	int srcinc, int dstinc,
+	int comchunk,
+	int srcskip, int dstskip,
+	int burstsize,
+	int bandwidthconserve,
+	int lowwmark,
+	int timestamp,
+	int enable)
+{
+	int r = chan;
+	unsigned long flags;
+	spinlock_t *spinl = &s6dmac_ctrl[_dmac_addr_index(dmac)].lock;
+	spin_lock_irqsave(spinl, flags);
+	if (r < 0) {
+		r = (readl(dmac + S6_DMA_NEXTFREE) >> S6_DMA_NEXTFREE_CHAN)
+			& S6_DMA_NEXTFREE_CHAN_MASK;
+	}
+	if (r >= s6dmac_ctrl[_dmac_addr_index(dmac)].chan_nb) {
+		if (chan < 0)
+			r = -EBUSY;
+		else
+			r = -ENXIO;
+	} else if (((readl(dmac + S6_DMA_NEXTFREE) >> S6_DMA_NEXTFREE_ENA)
+			>> r) & 1) {
+		r = -EBUSY;
+	} else {
+		s6dmac_enable_chan(dmac, r, prio, periphxfer,
+			srcinc, dstinc, comchunk, srcskip, dstskip, burstsize,
+			bandwidthconserve, lowwmark, timestamp, enable);
+	}
+	spin_unlock_irqrestore(spinl, flags);
+	return r;
+}
+
+static inline void s6dmac_put_fifo(u32 dmac, int chan,
+	u32 src, u32 dst, u32 size)
+{
+	unsigned long flags;
+	spinlock_t *spinl = &s6dmac_ctrl[_dmac_addr_index(dmac)].lock;
+	spin_lock_irqsave(spinl, flags);
+	writel(src, dmac + S6_DMA_DESCRFIFO0);
+	writel(dst, dmac + S6_DMA_DESCRFIFO1);
+	writel(size, dmac + S6_DMA_DESCRFIFO2);
+	writel(chan, dmac + S6_DMA_DESCRFIFO3);
+	spin_unlock_irqrestore(spinl, flags);
+}
+
+static inline u32 s6dmac_channel_enabled(u32 dmac, int chan)
+{
+	return readl(DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL) &
+			(1 << S6_DMA_CHNCTRL_ENABLE);
+}
+
+/*
+ * group 1-4 data port channels
+ * with port=0..3, nrch=1-4 channels,
+ * frrep=0/1 (dis- or enable frame repeat)
+ */
+static inline void s6dmac_dp_setup_group(u32 dmac, int port,
+			int nrch, int frrep)
+{
+	const static u8 mask[4] = {0, 3, 1, 2};
+	BUG_ON(dmac != S6_REG_DPDMA);
+	if ((port < 0) || (port > 3) || (nrch < 1) || (nrch > 4))
+		return;
+	writel((mask[nrch - 1] << S6_DMA_DPORTCTRLGRP_NRCHANS)
+		| ((frrep ? 1 : 0) << S6_DMA_DPORTCTRLGRP_FRAMEREP),
+		dmac + S6_DMA_DPORTCTRLGRP(port));
+}
+
+static inline void s6dmac_dp_switch_group(u32 dmac, int port, int enable)
+{
+	u32 tmp;
+	BUG_ON(dmac != S6_REG_DPDMA);
+	tmp = readl(dmac + S6_DMA_DPORTCTRLGRP(port));
+	if (enable)
+		tmp |= (1 << S6_DMA_DPORTCTRLGRP_ENA);
+	else
+		tmp &= ~(1 << S6_DMA_DPORTCTRLGRP_ENA);
+	writel(tmp, dmac + S6_DMA_DPORTCTRLGRP(port));
+}
+
+extern void s6dmac_put_fifo_cache(u32 dmac, int chan,
+	u32 src, u32 dst, u32 size);
+extern void s6dmac_disable_error_irqs(u32 dmac, u32 mask);
+extern u32 s6dmac_int_sources(u32 dmac, u32 channel);
+extern void s6dmac_release_chan(u32 dmac, int chan);
+
+#endif /* __ASM_XTENSA_S6000_DMAC_H */
diff --git a/arch/xtensa/variants/s6000/include/variant/gpio.h b/arch/xtensa/variants/s6000/include/variant/gpio.h
index 8327f62167e..8484ab0df46 100644
--- a/arch/xtensa/variants/s6000/include/variant/gpio.h
+++ b/arch/xtensa/variants/s6000/include/variant/gpio.h
@@ -1,6 +1,6 @@
 #ifndef _XTENSA_VARIANT_S6000_GPIO_H
 #define _XTENSA_VARIANT_S6000_GPIO_H
 
-extern int s6_gpio_init(void);
+extern int s6_gpio_init(u32 afsel);
 
 #endif /* _XTENSA_VARIANT_S6000_GPIO_H */
diff --git a/arch/xtensa/variants/s6000/include/variant/irq.h b/arch/xtensa/variants/s6000/include/variant/irq.h
index fa031cb0acc..97d6fc48def 100644
--- a/arch/xtensa/variants/s6000/include/variant/irq.h
+++ b/arch/xtensa/variants/s6000/include/variant/irq.h
@@ -1,9 +1,9 @@
-#ifndef __XTENSA_S6000_IRQ_H
-#define __XTENSA_S6000_IRQ_H
+#ifndef _XTENSA_S6000_IRQ_H
+#define _XTENSA_S6000_IRQ_H
 
 #define NO_IRQ		(-1)
+#define VARIANT_NR_IRQS 8 /* GPIO interrupts */
 
 extern void variant_irq_enable(unsigned int irq);
-extern void variant_irq_disable(unsigned int irq);
 
 #endif /* __XTENSA_S6000_IRQ_H */
diff --git a/block/Kconfig b/block/Kconfig
index 2c39527aa7d..95a86adc33a 100644
--- a/block/Kconfig
+++ b/block/Kconfig
@@ -23,8 +23,8 @@ menuconfig BLOCK
 
 if BLOCK
 
-config LBD
-	bool "Support for large block devices and files"
+config LBDAF
+	bool "Support for large (2TB+) block devices and files"
 	depends on !64BIT
 	default y
 	help
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 7541ea4bf9f..bd582a7f531 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -97,7 +97,7 @@ EXPORT_SYMBOL_GPL(blk_queue_lld_busy);
 
 /**
  * blk_set_default_limits - reset limits to default values
- * @limits:  the queue_limits structure to reset
+ * @lim:  the queue_limits structure to reset
  *
  * Description:
  *   Returns a queue_limit struct to its default state.  Can be used by
@@ -112,7 +112,7 @@ void blk_set_default_limits(struct queue_limits *lim)
 	lim->max_segment_size = MAX_SEGMENT_SIZE;
 	lim->max_sectors = lim->max_hw_sectors = SAFE_MAX_SECTORS;
 	lim->logical_block_size = lim->physical_block_size = lim->io_min = 512;
-	lim->bounce_pfn = BLK_BOUNCE_ANY;
+	lim->bounce_pfn = (unsigned long)(BLK_BOUNCE_ANY >> PAGE_SHIFT);
 	lim->alignment_offset = 0;
 	lim->io_opt = 0;
 	lim->misaligned = 0;
diff --git a/block/bsg.c b/block/bsg.c
index 54106f052f7..e7d47525424 100644
--- a/block/bsg.c
+++ b/block/bsg.c
@@ -315,7 +315,6 @@ out:
 	blk_put_request(rq);
 	if (next_rq) {
 		blk_rq_unmap_user(next_rq->bio);
-		next_rq->bio = NULL;
 		blk_put_request(next_rq);
 	}
 	return ERR_PTR(ret);
@@ -449,7 +448,6 @@ static int blk_complete_sgv4_hdr_rq(struct request *rq, struct sg_io_v4 *hdr,
 		hdr->dout_resid = rq->resid_len;
 		hdr->din_resid = rq->next_rq->resid_len;
 		blk_rq_unmap_user(bidi_bio);
-		rq->next_rq->bio = NULL;
 		blk_put_request(rq->next_rq);
 	} else if (rq_data_dir(rq) == READ)
 		hdr->din_resid = rq->resid_len;
@@ -468,7 +466,6 @@ static int blk_complete_sgv4_hdr_rq(struct request *rq, struct sg_io_v4 *hdr,
 	blk_rq_unmap_user(bio);
 	if (rq->cmd != rq->__cmd)
 		kfree(rq->cmd);
-	rq->bio = NULL;
 	blk_put_request(rq);
 
 	return ret;
diff --git a/drivers/Kconfig b/drivers/Kconfig
index a442c8f29fc..48bbdbe43e6 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -52,6 +52,8 @@ source "drivers/i2c/Kconfig"
 
 source "drivers/spi/Kconfig"
 
+source "drivers/pps/Kconfig"
+
 source "drivers/gpio/Kconfig"
 
 source "drivers/w1/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 00b44f4ccf0..bc4205d2fc3 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -72,6 +72,7 @@ obj-$(CONFIG_INPUT)		+= input/
 obj-$(CONFIG_I2O)		+= message/
 obj-$(CONFIG_RTC_LIB)		+= rtc/
 obj-y				+= i2c/ media/
+obj-$(CONFIG_PPS)		+= pps/
 obj-$(CONFIG_W1)		+= w1/
 obj-$(CONFIG_POWER_SUPPLY)	+= power/
 obj-$(CONFIG_HWMON)		+= hwmon/
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 431f8b43955..7ec7d88c599 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -266,6 +266,7 @@ config ACPI_DEBUG_FUNC_TRACE
 
 config ACPI_PCI_SLOT
 	tristate "PCI slot detection driver"
+	depends on SYSFS
 	default n
 	help
 	  This driver creates entries in /sys/bus/pci/slots/ for all PCI
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 2aa1908e5ce..b17c57f8503 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -679,6 +679,14 @@ config PATA_PLATFORM
 
 	  If unsure, say N.
 
+config PATA_AT91
+	tristate "PATA support for AT91SAM9260"
+	depends on ARM && ARCH_AT91
+	help
+	  This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
+
+	  If unsure, say N.
+
 config PATA_OF_PLATFORM
 	tristate "OpenFirmware platform device PATA support"
 	depends on PATA_PLATFORM && PPC_OF
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 1558059874f..38906f9bbb4 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -72,6 +72,7 @@ obj-$(CONFIG_PATA_SCH)		+= pata_sch.o
 obj-$(CONFIG_PATA_BF54X)	+= pata_bf54x.o
 obj-$(CONFIG_PATA_OCTEON_CF)	+= pata_octeon_cf.o
 obj-$(CONFIG_PATA_PLATFORM)	+= pata_platform.o
+obj-$(CONFIG_PATA_AT91)	+= pata_at91.o
 obj-$(CONFIG_PATA_OF_PLATFORM)	+= pata_of_platform.o
 obj-$(CONFIG_PATA_ICSIDE)	+= pata_icside.o
 # Should be last but two libata driver
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index ca4d208ddf3..045a486a09e 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -125,19 +125,19 @@ MODULE_PARM_DESC(force, "Force ATA configurations including cable type, link spe
 
 static int atapi_enabled = 1;
 module_param(atapi_enabled, int, 0444);
-MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
+MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on [default])");
 
 static int atapi_dmadir = 0;
 module_param(atapi_dmadir, int, 0444);
-MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off, 1=on)");
+MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off [default], 1=on)");
 
 int atapi_passthru16 = 1;
 module_param(atapi_passthru16, int, 0444);
-MODULE_PARM_DESC(atapi_passthru16, "Enable ATA_16 passthru for ATAPI devices; on by default (0=off, 1=on)");
+MODULE_PARM_DESC(atapi_passthru16, "Enable ATA_16 passthru for ATAPI devices (0=off, 1=on [default])");
 
 int libata_fua = 0;
 module_param_named(fua, libata_fua, int, 0444);
-MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)");
+MODULE_PARM_DESC(fua, "FUA support (0=off [default], 1=on)");
 
 static int ata_ignore_hpa;
 module_param_named(ignore_hpa, ata_ignore_hpa, int, 0644);
@@ -153,11 +153,11 @@ MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)");
 
 int libata_noacpi = 0;
 module_param_named(noacpi, libata_noacpi, int, 0444);
-MODULE_PARM_DESC(noacpi, "Disables the use of ACPI in probe/suspend/resume when set");
+MODULE_PARM_DESC(noacpi, "Disable the use of ACPI in probe/suspend/resume (0=off [default], 1=on)");
 
 int libata_allow_tpm = 0;
 module_param_named(allow_tpm, libata_allow_tpm, int, 0444);
-MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands");
+MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands (0=off [default], 1=on)");
 
 MODULE_AUTHOR("Jeff Garzik");
 MODULE_DESCRIPTION("Library module for ATA devices");
@@ -1993,11 +1993,17 @@ unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd)
  *	Check if the current speed of the device requires IORDY. Used
  *	by various controllers for chip configuration.
  */
-
 unsigned int ata_pio_need_iordy(const struct ata_device *adev)
 {
-	/* Controller doesn't support  IORDY. Probably a pointless check
-	   as the caller should know this */
+	/* Don't set IORDY if we're preparing for reset.  IORDY may
+	 * lead to controller lock up on certain controllers if the
+	 * port is not occupied.  See bko#11703 for details.
+	 */
+	if (adev->link->ap->pflags & ATA_PFLAG_RESETTING)
+		return 0;
+	/* Controller doesn't support IORDY.  Probably a pointless
+	 * check as the caller should know this.
+	 */
 	if (adev->link->ap->flags & ATA_FLAG_NO_IORDY)
 		return 0;
 	/* CF spec. r4.1 Table 22 says no iordy on PIO5 and PIO6.  */
@@ -2020,7 +2026,6 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev)
  *	Compute the highest mode possible if we are not using iordy. Return
  *	-1 if no iordy mode is available.
  */
-
 static u32 ata_pio_mask_no_iordy(const struct ata_device *adev)
 {
 	/* If we have no drive specific rule, then PIO 2 is non IORDY */
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
new file mode 100644
index 00000000000..4b27617be26
--- /dev/null
+++ b/drivers/ata/pata_at91.c
@@ -0,0 +1,361 @@
+/*
+ * PATA driver for AT91SAM9260 Static Memory Controller
+ * with CompactFlash interface in True IDE mode
+ *
+ * Copyright (C) 2009 Matyukevich Sergey
+ *
+ * Based on:
+ *      * generic platform driver by Paul Mundt: drivers/ata/pata_platform.c
+ *      * pata_at32 driver by Kristoffer Nyborg Gregertsen
+ *      * at91_ide driver by Stanislaw Gruszka
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <scsi/scsi_host.h>
+#include <linux/ata.h>
+#include <linux/clk.h>
+#include <linux/libata.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+
+#include <mach/at91sam9260_matrix.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91sam9260.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+
+
+#define DRV_NAME "pata_at91"
+#define DRV_VERSION "0.1"
+
+#define CF_IDE_OFFSET	    0x00c00000
+#define CF_ALT_IDE_OFFSET   0x00e00000
+#define CF_IDE_RES_SIZE     0x08
+
+struct at91_ide_info {
+	unsigned long mode;
+	unsigned int cs;
+
+	void __iomem *ide_addr;
+	void __iomem *alt_addr;
+};
+
+const struct ata_timing initial_timing =
+	{XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0};
+
+static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz)
+{
+	unsigned long mul;
+
+    /*
+     * cycles = x [nsec] * f [Hz] / 10^9 [ns in sec] =
+     *     x * (f / 1_000_000_000) =
+     *     x * ((f * 65536) / 1_000_000_000) / 65536 =
+     *     x * (((f / 10_000) * 65536) / 100_000) / 65536 =
+     */
+
+    mul = (mck_hz / 10000) << 16;
+    mul /= 100000;
+
+    return (ns * mul + 65536) >> 16;    /* rounding */
+}
+
+static void set_smc_mode(struct at91_ide_info *info)
+{
+    at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
+    return;
+}
+
+static void set_smc_timing(struct device *dev,
+		struct at91_ide_info *info, const struct ata_timing *ata)
+{
+	int read_cycle, write_cycle, active, recover;
+	int nrd_setup, nrd_pulse, nrd_recover;
+	int nwe_setup, nwe_pulse;
+
+	int ncs_write_setup, ncs_write_pulse;
+	int ncs_read_setup, ncs_read_pulse;
+
+	unsigned int mck_hz;
+	struct clk *mck;
+
+	read_cycle  = ata->cyc8b;
+	nrd_setup   = ata->setup;
+	nrd_pulse   = ata->act8b;
+	nrd_recover = ata->rec8b;
+
+	mck = clk_get(NULL, "mck");
+	BUG_ON(IS_ERR(mck));
+	mck_hz = clk_get_rate(mck);
+
+	read_cycle  = calc_mck_cycles(read_cycle, mck_hz);
+	nrd_setup   = calc_mck_cycles(nrd_setup, mck_hz);
+	nrd_pulse   = calc_mck_cycles(nrd_pulse, mck_hz);
+	nrd_recover = calc_mck_cycles(nrd_recover, mck_hz);
+
+	clk_put(mck);
+
+	active  = nrd_setup + nrd_pulse;
+	recover = read_cycle - active;
+
+	/* Need at least two cycles recovery */
+	if (recover < 2)
+		read_cycle = active + 2;
+
+	/* (CS0, CS1, DIR, OE) <= (CFCE1, CFCE2, CFRNW, NCSX) timings */
+	ncs_read_setup = 1;
+	ncs_read_pulse = read_cycle - 2;
+
+	/* Write timings same as read timings */
+	write_cycle = read_cycle;
+	nwe_setup = nrd_setup;
+	nwe_pulse = nrd_pulse;
+	ncs_write_setup = ncs_read_setup;
+	ncs_write_pulse = ncs_read_pulse;
+
+	dev_dbg(dev, "ATA timings: nrd_setup = %d nrd_pulse = %d nrd_cycle = %d\n",
+			nrd_setup, nrd_pulse, read_cycle);
+	dev_dbg(dev, "ATA timings: nwe_setup = %d nwe_pulse = %d nwe_cycle = %d\n",
+			nwe_setup, nwe_pulse, write_cycle);
+	dev_dbg(dev, "ATA timings: ncs_read_setup = %d ncs_read_pulse = %d\n",
+			ncs_read_setup, ncs_read_pulse);
+	dev_dbg(dev, "ATA timings: ncs_write_setup = %d ncs_write_pulse = %d\n",
+			ncs_write_setup, ncs_write_pulse);
+
+	at91_sys_write(AT91_SMC_SETUP(info->cs),
+			AT91_SMC_NWESETUP_(nwe_setup) |
+			AT91_SMC_NRDSETUP_(nrd_setup) |
+			AT91_SMC_NCS_WRSETUP_(ncs_write_setup) |
+			AT91_SMC_NCS_RDSETUP_(ncs_read_setup));
+
+	at91_sys_write(AT91_SMC_PULSE(info->cs),
+			AT91_SMC_NWEPULSE_(nwe_pulse) |
+			AT91_SMC_NRDPULSE_(nrd_pulse) |
+			AT91_SMC_NCS_WRPULSE_(ncs_write_pulse) |
+			AT91_SMC_NCS_RDPULSE_(ncs_read_pulse));
+
+	at91_sys_write(AT91_SMC_CYCLE(info->cs),
+			AT91_SMC_NWECYCLE_(write_cycle) |
+			AT91_SMC_NRDCYCLE_(read_cycle));
+
+	return;
+}
+
+static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	struct at91_ide_info *info = ap->host->private_data;
+	struct ata_timing timing;
+	int ret;
+
+	/* Compute ATA timing and set it to SMC */
+	ret = ata_timing_compute(adev, adev->pio_mode, &timing, 1000, 0);
+	if (ret) {
+		dev_warn(ap->dev, "Failed to compute ATA timing %d, \
+				set PIO_0 timing\n", ret);
+		set_smc_timing(ap->dev, info, &initial_timing);
+	} else {
+		set_smc_timing(ap->dev, info, &timing);
+	}
+
+	/* Setup SMC mode */
+	set_smc_mode(info);
+
+	return;
+}
+
+static unsigned int pata_at91_data_xfer_noirq(struct ata_device *dev,
+		unsigned char *buf, unsigned int buflen, int rw)
+{
+	struct at91_ide_info *info = dev->link->ap->host->private_data;
+	unsigned int consumed;
+	unsigned long flags;
+	unsigned int mode;
+
+	local_irq_save(flags);
+	mode = at91_sys_read(AT91_SMC_MODE(info->cs));
+
+	/* set 16bit mode before writing data */
+	at91_sys_write(AT91_SMC_MODE(info->cs),
+			(mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_16);
+
+	consumed = ata_sff_data_xfer(dev, buf, buflen, rw);
+
+	/* restore 8bit mode after data is written */
+	at91_sys_write(AT91_SMC_MODE(info->cs),
+			(mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_8);
+
+	local_irq_restore(flags);
+	return consumed;
+}
+
+static struct scsi_host_template pata_at91_sht = {
+	ATA_PIO_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations pata_at91_port_ops = {
+	.inherits	= &ata_sff_port_ops,
+
+	.sff_data_xfer	= pata_at91_data_xfer_noirq,
+	.set_piomode	= pata_at91_set_piomode,
+	.cable_detect	= ata_cable_40wire,
+	.port_start	= ATA_OP_NULL,
+};
+
+static int __devinit pata_at91_probe(struct platform_device *pdev)
+{
+	struct at91_cf_data *board = pdev->dev.platform_data;
+	struct device *dev = &pdev->dev;
+	struct at91_ide_info *info;
+	struct resource *mem_res;
+	struct ata_host *host;
+	struct ata_port *ap;
+	int irq_flags = 0;
+	int irq = 0;
+	int ret;
+
+	/*  get platform resources: IO/CTL memories and irq/rst pins */
+
+	if (pdev->num_resources != 1) {
+		dev_err(&pdev->dev, "invalid number of resources\n");
+		return -EINVAL;
+	}
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	if (!mem_res) {
+		dev_err(dev, "failed to get mem resource\n");
+		return -EINVAL;
+	}
+
+	irq = board->irq_pin;
+
+	/* init ata host */
+
+	host = ata_host_alloc(dev, 1);
+
+	if (!host)
+		return -ENOMEM;
+
+	ap = host->ports[0];
+	ap->ops = &pata_at91_port_ops;
+	ap->flags |= ATA_FLAG_SLAVE_POSS;
+	ap->pio_mask = ATA_PIO4;
+
+	if (!irq) {
+		ap->flags |= ATA_FLAG_PIO_POLLING;
+		ata_port_desc(ap, "no IRQ, using PIO polling");
+	}
+
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+
+	if (!info) {
+		dev_err(dev, "failed to allocate memory for private data\n");
+		return -ENOMEM;
+	}
+
+	info->cs    = board->chipselect;
+	info->mode  = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+		AT91_SMC_EXNWMODE_READY | AT91_SMC_BAT_SELECT |
+		AT91_SMC_DBW_8 | AT91_SMC_TDF_(0);
+
+	info->ide_addr = devm_ioremap(dev,
+			mem_res->start + CF_IDE_OFFSET, CF_IDE_RES_SIZE);
+
+	if (!info->ide_addr) {
+		dev_err(dev, "failed to map IO base\n");
+		ret = -ENOMEM;
+		goto err_ide_ioremap;
+	}
+
+	info->alt_addr = devm_ioremap(dev,
+			mem_res->start + CF_ALT_IDE_OFFSET, CF_IDE_RES_SIZE);
+
+	if (!info->alt_addr) {
+		dev_err(dev, "failed to map CTL base\n");
+		ret = -ENOMEM;
+		goto err_alt_ioremap;
+	}
+
+	ap->ioaddr.cmd_addr = info->ide_addr;
+	ap->ioaddr.ctl_addr = info->alt_addr + 0x06;
+	ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
+
+	ata_sff_std_ports(&ap->ioaddr);
+
+	ata_port_desc(ap, "mmio cmd 0x%llx ctl 0x%llx",
+			(unsigned long long)mem_res->start + CF_IDE_OFFSET,
+			(unsigned long long)mem_res->start + CF_ALT_IDE_OFFSET);
+
+	host->private_data = info;
+
+	return ata_host_activate(host, irq ? gpio_to_irq(irq) : 0,
+			irq ? ata_sff_interrupt : NULL,
+			irq_flags, &pata_at91_sht);
+
+err_alt_ioremap:
+	devm_iounmap(dev, info->ide_addr);
+
+err_ide_ioremap:
+	kfree(info);
+
+	return ret;
+}
+
+static int __devexit pata_at91_remove(struct platform_device *pdev)
+{
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	struct at91_ide_info *info = host->private_data;
+	struct device *dev = &pdev->dev;
+
+	if (!host)
+		return 0;
+
+	ata_host_detach(host);
+
+	if (!info)
+		return 0;
+
+	devm_iounmap(dev, info->ide_addr);
+	devm_iounmap(dev, info->alt_addr);
+
+	kfree(info);
+	return 0;
+}
+
+static struct platform_driver pata_at91_driver = {
+	.probe		= pata_at91_probe,
+	.remove		= __devexit_p(pata_at91_remove),
+	.driver 	= {
+		.name		= DRV_NAME,
+		.owner		= THIS_MODULE,
+	},
+};
+
+static int __init pata_at91_init(void)
+{
+	return platform_driver_register(&pata_at91_driver);
+}
+
+static void __exit pata_at91_exit(void)
+{
+	platform_driver_unregister(&pata_at91_driver);
+}
+
+
+module_init(pata_at91_init);
+module_exit(pata_at91_exit);
+
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Driver for CF in True IDE mode on AT91SAM9260 SoC");
+MODULE_AUTHOR("Matyukevich Sergey");
+MODULE_VERSION(DRV_VERSION);
+
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index 68d27bc70d0..2bc2dbe30e8 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -694,7 +694,7 @@ mpc52xx_ata_probe(struct of_device *op, const struct of_device_id *match)
 	struct bcom_task *dmatsk = NULL;
 
 	/* Get ipb frequency */
-	ipb_freq = mpc52xx_find_ipb_freq(op->node);
+	ipb_freq = mpc5xxx_get_bus_frequency(op->node);
 	if (!ipb_freq) {
 		dev_err(&op->dev, "could not determine IPB bus frequency\n");
 		return -ENODEV;
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 36b8629203b..94eaa432c40 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -1378,6 +1378,37 @@ static int sata_fsl_remove(struct of_device *ofdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int sata_fsl_suspend(struct of_device *op, pm_message_t state)
+{
+	struct ata_host *host = dev_get_drvdata(&op->dev);
+	return ata_host_suspend(host, state);
+}
+
+static int sata_fsl_resume(struct of_device *op)
+{
+	struct ata_host *host = dev_get_drvdata(&op->dev);
+	struct sata_fsl_host_priv *host_priv = host->private_data;
+	int ret;
+	void __iomem *hcr_base = host_priv->hcr_base;
+	struct ata_port *ap = host->ports[0];
+	struct sata_fsl_port_priv *pp = ap->private_data;
+
+	ret = sata_fsl_init_controller(host);
+	if (ret) {
+		dev_printk(KERN_ERR, &op->dev,
+			"Error initialize hardware\n");
+		return ret;
+	}
+
+	/* Recovery the CHBA register in host controller cmd register set */
+	iowrite32(pp->cmdslot_paddr & 0xffffffff, hcr_base + CHBA);
+
+	ata_host_resume(host);
+	return 0;
+}
+#endif
+
 static struct of_device_id fsl_sata_match[] = {
 	{
 		.compatible = "fsl,pq-sata",
@@ -1392,6 +1423,10 @@ static struct of_platform_driver fsl_sata_driver = {
 	.match_table	= fsl_sata_match,
 	.probe		= sata_fsl_probe,
 	.remove		= sata_fsl_remove,
+#ifdef CONFIG_PM
+	.suspend	= sata_fsl_suspend,
+	.resume		= sata_fsl_resume,
+#endif
 };
 
 static int __init sata_fsl_init(void)
diff --git a/drivers/block/hd.c b/drivers/block/hd.c
index f65b3f369eb..f9d01608cbe 100644
--- a/drivers/block/hd.c
+++ b/drivers/block/hd.c
@@ -100,8 +100,6 @@ static DEFINE_SPINLOCK(hd_lock);
 static struct request_queue *hd_queue;
 static struct request *hd_req;
 
-#define MAJOR_NR HD_MAJOR
-
 #define TIMEOUT_VALUE	(6*HZ)
 #define	HD_DELAY	0
 
@@ -712,12 +710,12 @@ static int __init hd_init(void)
 {
 	int drive;
 
-	if (register_blkdev(MAJOR_NR, "hd"))
+	if (register_blkdev(HD_MAJOR, "hd"))
 		return -1;
 
 	hd_queue = blk_init_queue(do_hd_request, &hd_lock);
 	if (!hd_queue) {
-		unregister_blkdev(MAJOR_NR, "hd");
+		unregister_blkdev(HD_MAJOR, "hd");
 		return -ENOMEM;
 	}
 
@@ -751,7 +749,7 @@ static int __init hd_init(void)
 		struct hd_i_struct *p = &hd_info[drive];
 		if (!disk)
 			goto Enomem;
-		disk->major = MAJOR_NR;
+		disk->major = HD_MAJOR;
 		disk->first_minor = drive << 6;
 		disk->fops = &hd_fops;
 		sprintf(disk->disk_name, "hd%c", 'a'+drive);
@@ -795,7 +793,7 @@ out1:
 	NR_HD = 0;
 out:
 	del_timer(&device_timer);
-	unregister_blkdev(MAJOR_NR, "hd");
+	unregister_blkdev(HD_MAJOR, "hd");
 	blk_cleanup_queue(hd_queue);
 	return -1;
 Enomem:
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 30bae6de6a0..0bd01f49cfd 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -807,7 +807,7 @@ if RTC_LIB=n
 config RTC
 	tristate "Enhanced Real Time Clock Support (legacy PC RTC driver)"
 	depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV \
-			&& !ARM && !SUPERH && !S390 && !AVR32
+			&& !ARM && !SUPERH && !S390 && !AVR32 && !BLACKFIN
 	---help---
 	  If you say Y here and create a character special file /dev/rtc with
 	  major number 10 and minor number 135 using mknod ("man mknod"), you
diff --git a/drivers/char/agp/agp.h b/drivers/char/agp/agp.h
index 46f50753117..178e2e9e9f0 100644
--- a/drivers/char/agp/agp.h
+++ b/drivers/char/agp/agp.h
@@ -107,7 +107,7 @@ struct agp_bridge_driver {
 	void (*agp_enable)(struct agp_bridge_data *, u32);
 	void (*cleanup)(void);
 	void (*tlb_flush)(struct agp_memory *);
-	unsigned long (*mask_memory)(struct agp_bridge_data *, unsigned long, int);
+	unsigned long (*mask_memory)(struct agp_bridge_data *, struct page *, int);
 	void (*cache_flush)(void);
 	int (*create_gatt_table)(struct agp_bridge_data *);
 	int (*free_gatt_table)(struct agp_bridge_data *);
@@ -115,9 +115,9 @@ struct agp_bridge_driver {
 	int (*remove_memory)(struct agp_memory *, off_t, int);
 	struct agp_memory *(*alloc_by_type) (size_t, int);
 	void (*free_by_type)(struct agp_memory *);
-	void *(*agp_alloc_page)(struct agp_bridge_data *);
+	struct page *(*agp_alloc_page)(struct agp_bridge_data *);
 	int (*agp_alloc_pages)(struct agp_bridge_data *, struct agp_memory *, size_t);
-	void (*agp_destroy_page)(void *, int flags);
+	void (*agp_destroy_page)(struct page *, int flags);
 	void (*agp_destroy_pages)(struct agp_memory *);
 	int (*agp_type_to_mask_type) (struct agp_bridge_data *, int);
 	void (*chipset_flush)(struct agp_bridge_data *);
@@ -278,10 +278,10 @@ int agp_generic_insert_memory(struct agp_memory *mem, off_t pg_start, int type);
 int agp_generic_remove_memory(struct agp_memory *mem, off_t pg_start, int type);
 struct agp_memory *agp_generic_alloc_by_type(size_t page_count, int type);
 void agp_generic_free_by_type(struct agp_memory *curr);
-void *agp_generic_alloc_page(struct agp_bridge_data *bridge);
+struct page *agp_generic_alloc_page(struct agp_bridge_data *bridge);
 int agp_generic_alloc_pages(struct agp_bridge_data *agp_bridge,
 			    struct agp_memory *memory, size_t page_count);
-void agp_generic_destroy_page(void *addr, int flags);
+void agp_generic_destroy_page(struct page *page, int flags);
 void agp_generic_destroy_pages(struct agp_memory *memory);
 void agp_free_key(int key);
 int agp_num_entries(void);
@@ -291,7 +291,7 @@ int agp_3_5_enable(struct agp_bridge_data *bridge);
 void global_cache_flush(void);
 void get_agp_version(struct agp_bridge_data *bridge);
 unsigned long agp_generic_mask_memory(struct agp_bridge_data *bridge,
-	unsigned long addr, int type);
+				      struct page *page, int type);
 int agp_generic_type_to_mask_type(struct agp_bridge_data *bridge,
 				  int type);
 struct agp_bridge_data *agp_generic_find_bridge(struct pci_dev *pdev);
diff --git a/drivers/char/agp/ali-agp.c b/drivers/char/agp/ali-agp.c
index dc8d1a90971..201ef3ffd48 100644
--- a/drivers/char/agp/ali-agp.c
+++ b/drivers/char/agp/ali-agp.c
@@ -141,37 +141,37 @@ static void m1541_cache_flush(void)
 	}
 }
 
-static void *m1541_alloc_page(struct agp_bridge_data *bridge)
+static struct page *m1541_alloc_page(struct agp_bridge_data *bridge)
 {
-	void *addr = agp_generic_alloc_page(agp_bridge);
+	struct page *page = agp_generic_alloc_page(agp_bridge);
 	u32 temp;
 
-	if (!addr)
+	if (!page)
 		return NULL;
 
 	pci_read_config_dword(agp_bridge->dev, ALI_CACHE_FLUSH_CTRL, &temp);
 	pci_write_config_dword(agp_bridge->dev, ALI_CACHE_FLUSH_CTRL,
 			(((temp & ALI_CACHE_FLUSH_ADDR_MASK) |
-			  virt_to_gart(addr)) | ALI_CACHE_FLUSH_EN ));
-	return addr;
+			  phys_to_gart(page_to_phys(page))) | ALI_CACHE_FLUSH_EN ));
+	return page;
 }
 
-static void ali_destroy_page(void * addr, int flags)
+static void ali_destroy_page(struct page *page, int flags)
 {
-	if (addr) {
+	if (page) {
 		if (flags & AGP_PAGE_DESTROY_UNMAP) {
 			global_cache_flush();	/* is this really needed?  --hch */
-			agp_generic_destroy_page(addr, flags);
+			agp_generic_destroy_page(page, flags);
 		} else
-			agp_generic_destroy_page(addr, flags);
+			agp_generic_destroy_page(page, flags);
 	}
 }
 
-static void m1541_destroy_page(void * addr, int flags)
+static void m1541_destroy_page(struct page *page, int flags)
 {
 	u32 temp;
 
-	if (addr == NULL)
+	if (page == NULL)
 		return;
 
 	if (flags & AGP_PAGE_DESTROY_UNMAP) {
@@ -180,9 +180,9 @@ static void m1541_destroy_page(void * addr, int flags)
 		pci_read_config_dword(agp_bridge->dev, ALI_CACHE_FLUSH_CTRL, &temp);
 		pci_write_config_dword(agp_bridge->dev, ALI_CACHE_FLUSH_CTRL,
 				       (((temp & ALI_CACHE_FLUSH_ADDR_MASK) |
-					 virt_to_gart(addr)) | ALI_CACHE_FLUSH_EN));
+					 phys_to_gart(page_to_phys(page))) | ALI_CACHE_FLUSH_EN));
 	}
-	agp_generic_destroy_page(addr, flags);
+	agp_generic_destroy_page(page, flags);
 }
 
 
@@ -346,7 +346,7 @@ found:
 			devs[j].chipset_name = "M1641";
 			break;
 		case 0x43:
-			devs[j].chipset_name = "M????";
+			devs[j].chipset_name = "M1621";
 			break;
 		case 0x47:
 			devs[j].chipset_name = "M1647";
diff --git a/drivers/char/agp/amd-k7-agp.c b/drivers/char/agp/amd-k7-agp.c
index 3f98254b911..ba9bde71eaa 100644
--- a/drivers/char/agp/amd-k7-agp.c
+++ b/drivers/char/agp/amd-k7-agp.c
@@ -325,7 +325,7 @@ static int amd_insert_memory(struct agp_memory *mem, off_t pg_start, int type)
 		addr = (j * PAGE_SIZE) + agp_bridge->gart_bus_addr;
 		cur_gatt = GET_GATT(addr);
 		writel(agp_generic_mask_memory(agp_bridge,
-			mem->memory[i], mem->type), cur_gatt+GET_GATT_OFF(addr));
+			mem->pages[i], mem->type), cur_gatt+GET_GATT_OFF(addr));
 		readl(cur_gatt+GET_GATT_OFF(addr));	/* PCI Posting. */
 	}
 	amd_irongate_tlbflush(mem);
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index d765afda9c2..3bf5dda90f4 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -79,7 +79,7 @@ static int amd64_insert_memory(struct agp_memory *mem, off_t pg_start, int type)
 
 	for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
 		tmp = agp_bridge->driver->mask_memory(agp_bridge,
-			mem->memory[i], mask_type);
+			mem->pages[i], mask_type);
 
 		BUG_ON(tmp & 0xffffff0000000ffcULL);
 		pte = (tmp & 0x000000ff00000000ULL) >> 28;
diff --git a/drivers/char/agp/ati-agp.c b/drivers/char/agp/ati-agp.c
index f1537eece07..33656e144cc 100644
--- a/drivers/char/agp/ati-agp.c
+++ b/drivers/char/agp/ati-agp.c
@@ -269,12 +269,17 @@ static int ati_insert_memory(struct agp_memory * mem,
 	int i, j, num_entries;
 	unsigned long __iomem *cur_gatt;
 	unsigned long addr;
+	int mask_type;
 
 	num_entries = A_SIZE_LVL2(agp_bridge->current_size)->num_entries;
 
-	if (type != 0 || mem->type != 0)
+	mask_type = agp_generic_type_to_mask_type(mem->bridge, type);
+	if (mask_type != 0 || type != mem->type)
 		return -EINVAL;
 
+	if (mem->page_count == 0)
+		return 0;
+
 	if ((pg_start + mem->page_count) > num_entries)
 		return -EINVAL;
 
@@ -296,10 +301,11 @@ static int ati_insert_memory(struct agp_memory * mem,
 	for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
 		addr = (j * PAGE_SIZE) + agp_bridge->gart_bus_addr;
 		cur_gatt = GET_GATT(addr);
-		writel(agp_bridge->driver->mask_memory(agp_bridge,
-			mem->memory[i], mem->type), cur_gatt+GET_GATT_OFF(addr));
-		readl(cur_gatt+GET_GATT_OFF(addr));	/* PCI Posting. */
+		writel(agp_bridge->driver->mask_memory(agp_bridge,	
+						       mem->pages[i], mem->type),
+		       cur_gatt+GET_GATT_OFF(addr));
 	}
+	readl(GET_GATT(agp_bridge->gart_bus_addr)); /* PCI posting */
 	agp_bridge->driver->tlb_flush(mem);
 	return 0;
 }
@@ -310,17 +316,22 @@ static int ati_remove_memory(struct agp_memory * mem, off_t pg_start,
 	int i;
 	unsigned long __iomem *cur_gatt;
 	unsigned long addr;
+	int mask_type;
 
-	if (type != 0 || mem->type != 0)
+	mask_type = agp_generic_type_to_mask_type(mem->bridge, type);
+	if (mask_type != 0 || type != mem->type)
 		return -EINVAL;
 
+	if (mem->page_count == 0)
+		return 0;
+
 	for (i = pg_start; i < (mem->page_count + pg_start); i++) {
 		addr = (i * PAGE_SIZE) + agp_bridge->gart_bus_addr;
 		cur_gatt = GET_GATT(addr);
 		writel(agp_bridge->scratch_page, cur_gatt+GET_GATT_OFF(addr));
-		readl(cur_gatt+GET_GATT_OFF(addr)); /* PCI Posting. */
 	}
 
+	readl(GET_GATT(agp_bridge->gart_bus_addr)); /* PCI posting */
 	agp_bridge->driver->tlb_flush(mem);
 	return 0;
 }
diff --git a/drivers/char/agp/backend.c b/drivers/char/agp/backend.c
index 8c617ad7497..cfa5a649dfe 100644
--- a/drivers/char/agp/backend.c
+++ b/drivers/char/agp/backend.c
@@ -141,17 +141,17 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge)
 	bridge->version = &agp_current_version;
 
 	if (bridge->driver->needs_scratch_page) {
-		void *addr = bridge->driver->agp_alloc_page(bridge);
+		struct page *page = bridge->driver->agp_alloc_page(bridge);
 
-		if (!addr) {
+		if (!page) {
 			dev_err(&bridge->dev->dev,
 				"can't get memory for scratch page\n");
 			return -ENOMEM;
 		}
 
-		bridge->scratch_page_real = virt_to_gart(addr);
+		bridge->scratch_page_real = phys_to_gart(page_to_phys(page));
 		bridge->scratch_page =
-		    bridge->driver->mask_memory(bridge, bridge->scratch_page_real, 0);
+		    bridge->driver->mask_memory(bridge, page, 0);
 	}
 
 	size_value = bridge->driver->fetch_size();
diff --git a/drivers/char/agp/efficeon-agp.c b/drivers/char/agp/efficeon-agp.c
index 453543a1f29..35d50f2861b 100644
--- a/drivers/char/agp/efficeon-agp.c
+++ b/drivers/char/agp/efficeon-agp.c
@@ -65,8 +65,9 @@ static const struct gatt_mask efficeon_generic_masks[] =
 };
 
 /* This function does the same thing as mask_memory() for this chipset... */
-static inline unsigned long efficeon_mask_memory(unsigned long addr)
+static inline unsigned long efficeon_mask_memory(struct page *page)
 {
+	unsigned long addr = phys_to_gart(page_to_phys(page));
 	return addr | 0x00000001;
 }
 
@@ -257,7 +258,7 @@ static int efficeon_insert_memory(struct agp_memory * mem, off_t pg_start, int t
 	last_page = NULL;
 	for (i = 0; i < count; i++) {
 		int index = pg_start + i;
-		unsigned long insert = efficeon_mask_memory(mem->memory[i]);
+		unsigned long insert = efficeon_mask_memory(mem->pages[i]);
 
 		page = (unsigned int *) efficeon_private.l1_table[index >> 10];
 
diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c
index 2224b762b7f..1e8b461b91f 100644
--- a/drivers/char/agp/generic.c
+++ b/drivers/char/agp/generic.c
@@ -95,13 +95,13 @@ EXPORT_SYMBOL(agp_flush_chipset);
 
 void agp_alloc_page_array(size_t size, struct agp_memory *mem)
 {
-	mem->memory = NULL;
+	mem->pages = NULL;
 	mem->vmalloc_flag = false;
 
 	if (size <= 2*PAGE_SIZE)
-		mem->memory = kmalloc(size, GFP_KERNEL | __GFP_NORETRY);
-	if (mem->memory == NULL) {
-		mem->memory = vmalloc(size);
+		mem->pages = kmalloc(size, GFP_KERNEL | __GFP_NORETRY);
+	if (mem->pages == NULL) {
+		mem->pages = vmalloc(size);
 		mem->vmalloc_flag = true;
 	}
 }
@@ -110,9 +110,9 @@ EXPORT_SYMBOL(agp_alloc_page_array);
 void agp_free_page_array(struct agp_memory *mem)
 {
 	if (mem->vmalloc_flag) {
-		vfree(mem->memory);
+		vfree(mem->pages);
 	} else {
-		kfree(mem->memory);
+		kfree(mem->pages);
 	}
 }
 EXPORT_SYMBOL(agp_free_page_array);
@@ -136,7 +136,7 @@ static struct agp_memory *agp_create_user_memory(unsigned long num_agp_pages)
 
 	agp_alloc_page_array(alloc_size, new);
 
-	if (new->memory == NULL) {
+	if (new->pages == NULL) {
 		agp_free_key(new->key);
 		kfree(new);
 		return NULL;
@@ -162,7 +162,7 @@ struct agp_memory *agp_create_memory(int scratch_pages)
 
 	agp_alloc_page_array(PAGE_SIZE * scratch_pages, new);
 
-	if (new->memory == NULL) {
+	if (new->pages == NULL) {
 		agp_free_key(new->key);
 		kfree(new);
 		return NULL;
@@ -206,15 +206,13 @@ void agp_free_memory(struct agp_memory *curr)
 		} else {
 
 			for (i = 0; i < curr->page_count; i++) {
-				curr->memory[i] = (unsigned long)gart_to_virt(
-					curr->memory[i]);
 				curr->bridge->driver->agp_destroy_page(
-					(void *)curr->memory[i],
+					curr->pages[i],
 					AGP_PAGE_DESTROY_UNMAP);
 			}
 			for (i = 0; i < curr->page_count; i++) {
 				curr->bridge->driver->agp_destroy_page(
-					(void *)curr->memory[i],
+					curr->pages[i],
 					AGP_PAGE_DESTROY_FREE);
 			}
 		}
@@ -282,13 +280,13 @@ struct agp_memory *agp_allocate_memory(struct agp_bridge_data *bridge,
 	}
 
 	for (i = 0; i < page_count; i++) {
-		void *addr = bridge->driver->agp_alloc_page(bridge);
+		struct page *page = bridge->driver->agp_alloc_page(bridge);
 
-		if (addr == NULL) {
+		if (page == NULL) {
 			agp_free_memory(new);
 			return NULL;
 		}
-		new->memory[i] = virt_to_gart(addr);
+		new->pages[i] = page;
 		new->page_count++;
 	}
 	new->bridge = bridge;
@@ -1134,7 +1132,7 @@ int agp_generic_insert_memory(struct agp_memory * mem, off_t pg_start, int type)
 	}
 
 	for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
-		writel(bridge->driver->mask_memory(bridge, mem->memory[i], mask_type),
+		writel(bridge->driver->mask_memory(bridge, mem->pages[i], mask_type),
 		       bridge->gatt_table+j);
 	}
 	readl(bridge->gatt_table+j-1);	/* PCI Posting. */
@@ -1204,7 +1202,7 @@ struct agp_memory *agp_generic_alloc_user(size_t page_count, int type)
 		return NULL;
 
 	for (i = 0; i < page_count; i++)
-		new->memory[i] = 0;
+		new->pages[i] = 0;
 	new->page_count = 0;
 	new->type = type;
 	new->num_scratch_pages = pages;
@@ -1237,23 +1235,20 @@ int agp_generic_alloc_pages(struct agp_bridge_data *bridge, struct agp_memory *m
 		get_page(page);
 		atomic_inc(&agp_bridge->current_memory_agp);
 
-		/* set_memory_array_uc() needs virtual address */
-		mem->memory[i] = (unsigned long)page_address(page);
+		mem->pages[i] = page;
 		mem->page_count++;
 	}
 
 #ifdef CONFIG_X86
-	set_memory_array_uc(mem->memory, num_pages);
+	set_pages_array_uc(mem->pages, num_pages);
 #endif
 	ret = 0;
 out:
-	for (i = 0; i < mem->page_count; i++)
-		mem->memory[i] = virt_to_gart((void *)mem->memory[i]);
 	return ret;
 }
 EXPORT_SYMBOL(agp_generic_alloc_pages);
 
-void *agp_generic_alloc_page(struct agp_bridge_data *bridge)
+struct page *agp_generic_alloc_page(struct agp_bridge_data *bridge)
 {
 	struct page * page;
 
@@ -1265,56 +1260,47 @@ void *agp_generic_alloc_page(struct agp_bridge_data *bridge)
 
 	get_page(page);
 	atomic_inc(&agp_bridge->current_memory_agp);
-	return page_address(page);
+	return page;
 }
 EXPORT_SYMBOL(agp_generic_alloc_page);
 
 void agp_generic_destroy_pages(struct agp_memory *mem)
 {
 	int i;
-	void *addr;
 	struct page *page;
 
 	if (!mem)
 		return;
 
-	for (i = 0; i < mem->page_count; i++)
-		mem->memory[i] = (unsigned long)gart_to_virt(mem->memory[i]);
-
 #ifdef CONFIG_X86
-	set_memory_array_wb(mem->memory, mem->page_count);
+	set_pages_array_wb(mem->pages, mem->page_count);
 #endif
 
 	for (i = 0; i < mem->page_count; i++) {
-		addr = (void *)mem->memory[i];
-		page = virt_to_page(addr);
+		page = mem->pages[i];
 
 #ifndef CONFIG_X86
 		unmap_page_from_agp(page);
 #endif
-
 		put_page(page);
-		free_page((unsigned long)addr);
+		__free_page(page);
 		atomic_dec(&agp_bridge->current_memory_agp);
-		mem->memory[i] = 0;
+		mem->pages[i] = NULL;
 	}
 }
 EXPORT_SYMBOL(agp_generic_destroy_pages);
 
-void agp_generic_destroy_page(void *addr, int flags)
+void agp_generic_destroy_page(struct page *page, int flags)
 {
-	struct page *page;
-
-	if (addr == NULL)
+	if (page == NULL)
 		return;
 
-	page = virt_to_page(addr);
 	if (flags & AGP_PAGE_DESTROY_UNMAP)
 		unmap_page_from_agp(page);
 
 	if (flags & AGP_PAGE_DESTROY_FREE) {
 		put_page(page);
-		free_page((unsigned long)addr);
+		__free_page(page);
 		atomic_dec(&agp_bridge->current_memory_agp);
 	}
 }
@@ -1361,8 +1347,9 @@ void global_cache_flush(void)
 EXPORT_SYMBOL(global_cache_flush);
 
 unsigned long agp_generic_mask_memory(struct agp_bridge_data *bridge,
-	unsigned long addr, int type)
+				      struct page *page, int type)
 {
+	unsigned long addr = phys_to_gart(page_to_phys(page));
 	/* memory type is ignored in the generic routine */
 	if (bridge->driver->masks)
 		return addr | bridge->driver->masks[0].mask;
diff --git a/drivers/char/agp/hp-agp.c b/drivers/char/agp/hp-agp.c
index 183ac3fe44f..8f3d4c18491 100644
--- a/drivers/char/agp/hp-agp.c
+++ b/drivers/char/agp/hp-agp.c
@@ -361,13 +361,11 @@ hp_zx1_insert_memory (struct agp_memory *mem, off_t pg_start, int type)
 	for (i = 0, j = io_pg_start; i < mem->page_count; i++) {
 		unsigned long paddr;
 
-		paddr = mem->memory[i];
+		paddr = page_to_phys(mem->pages[i]);
 		for (k = 0;
 		     k < hp->io_pages_per_kpage;
 		     k++, j++, paddr += hp->io_page_size) {
-			hp->gatt[j] =
-				agp_bridge->driver->mask_memory(agp_bridge,
-					paddr, type);
+			hp->gatt[j] = HP_ZX1_PDIR_VALID_BIT | paddr;
 		}
 	}
 
@@ -397,8 +395,9 @@ hp_zx1_remove_memory (struct agp_memory *mem, off_t pg_start, int type)
 
 static unsigned long
 hp_zx1_mask_memory (struct agp_bridge_data *bridge,
-	unsigned long addr, int type)
+		    struct page *page, int type)
 {
+	unsigned long addr = phys_to_gart(page_to_phys(page));
 	return HP_ZX1_PDIR_VALID_BIT | addr;
 }
 
@@ -518,8 +517,9 @@ zx1_gart_probe (acpi_handle obj, u32 depth, void *context, void **ret)
 	if (hp_zx1_setup(sba_hpa + HP_ZX1_IOC_OFFSET, lba_hpa))
 		return AE_OK;
 
-	printk(KERN_INFO PFX "Detected HP ZX1 %s AGP chipset (ioc=%lx, lba=%lx)\n",
-		(char *) context, sba_hpa + HP_ZX1_IOC_OFFSET, lba_hpa);
+	printk(KERN_INFO PFX "Detected HP ZX1 %s AGP chipset "
+		"(ioc=%llx, lba=%llx)\n", (char *)context,
+		sba_hpa + HP_ZX1_IOC_OFFSET, lba_hpa);
 
 	hp_zx1_gart_found = 1;
 	return AE_CTRL_TERMINATE; /* we only support one bridge; quit looking */
diff --git a/drivers/char/agp/i460-agp.c b/drivers/char/agp/i460-agp.c
index 10da687d131..60cc35bb5db 100644
--- a/drivers/char/agp/i460-agp.c
+++ b/drivers/char/agp/i460-agp.c
@@ -60,6 +60,9 @@
  */
 #define WR_FLUSH_GATT(index)	RD_GATT(index)
 
+static unsigned long i460_mask_memory (struct agp_bridge_data *bridge,
+				       unsigned long addr, int type);
+
 static struct {
 	void *gatt;				/* ioremap'd GATT area */
 
@@ -74,6 +77,7 @@ static struct {
 		unsigned long *alloced_map;	/* bitmap of kernel-pages in use */
 		int refcount;			/* number of kernel pages using the large page */
 		u64 paddr;			/* physical address of large page */
+		struct page *page; 		/* page pointer */
 	} *lp_desc;
 } i460;
 
@@ -294,7 +298,7 @@ static int i460_insert_memory_small_io_page (struct agp_memory *mem,
 	void *temp;
 
 	pr_debug("i460_insert_memory_small_io_page(mem=%p, pg_start=%ld, type=%d, paddr0=0x%lx)\n",
-		 mem, pg_start, type, mem->memory[0]);
+		 mem, pg_start, type, page_to_phys(mem->pages[0]));
 
 	if (type >= AGP_USER_TYPES || mem->type >= AGP_USER_TYPES)
 		return -EINVAL;
@@ -321,10 +325,9 @@ static int i460_insert_memory_small_io_page (struct agp_memory *mem,
 
 	io_page_size = 1UL << I460_IO_PAGE_SHIFT;
 	for (i = 0, j = io_pg_start; i < mem->page_count; i++) {
-		paddr = mem->memory[i];
+		paddr = phys_to_gart(page_to_phys(mem->pages[i]));
 		for (k = 0; k < I460_IOPAGES_PER_KPAGE; k++, j++, paddr += io_page_size)
-			WR_GATT(j, agp_bridge->driver->mask_memory(agp_bridge,
-				paddr, mem->type));
+			WR_GATT(j, i460_mask_memory(agp_bridge, paddr, mem->type));
 	}
 	WR_FLUSH_GATT(j - 1);
 	return 0;
@@ -364,10 +367,9 @@ static int i460_alloc_large_page (struct lp_desc *lp)
 {
 	unsigned long order = I460_IO_PAGE_SHIFT - PAGE_SHIFT;
 	size_t map_size;
-	void *lpage;
 
-	lpage = (void *) __get_free_pages(GFP_KERNEL, order);
-	if (!lpage) {
+	lp->page = alloc_pages(GFP_KERNEL, order);
+	if (!lp->page) {
 		printk(KERN_ERR PFX "Couldn't alloc 4M GART page...\n");
 		return -ENOMEM;
 	}
@@ -375,12 +377,12 @@ static int i460_alloc_large_page (struct lp_desc *lp)
 	map_size = ((I460_KPAGES_PER_IOPAGE + BITS_PER_LONG - 1) & -BITS_PER_LONG)/8;
 	lp->alloced_map = kzalloc(map_size, GFP_KERNEL);
 	if (!lp->alloced_map) {
-		free_pages((unsigned long) lpage, order);
+		__free_pages(lp->page, order);
 		printk(KERN_ERR PFX "Out of memory, we're in trouble...\n");
 		return -ENOMEM;
 	}
 
-	lp->paddr = virt_to_gart(lpage);
+	lp->paddr = phys_to_gart(page_to_phys(lp->page));
 	lp->refcount = 0;
 	atomic_add(I460_KPAGES_PER_IOPAGE, &agp_bridge->current_memory_agp);
 	return 0;
@@ -391,7 +393,7 @@ static void i460_free_large_page (struct lp_desc *lp)
 	kfree(lp->alloced_map);
 	lp->alloced_map = NULL;
 
-	free_pages((unsigned long) gart_to_virt(lp->paddr), I460_IO_PAGE_SHIFT - PAGE_SHIFT);
+	__free_pages(lp->page, I460_IO_PAGE_SHIFT - PAGE_SHIFT);
 	atomic_sub(I460_KPAGES_PER_IOPAGE, &agp_bridge->current_memory_agp);
 }
 
@@ -439,8 +441,8 @@ static int i460_insert_memory_large_io_page (struct agp_memory *mem,
 			if (i460_alloc_large_page(lp) < 0)
 				return -ENOMEM;
 			pg = lp - i460.lp_desc;
-			WR_GATT(pg, agp_bridge->driver->mask_memory(agp_bridge,
-				lp->paddr, 0));
+			WR_GATT(pg, i460_mask_memory(agp_bridge,
+						     lp->paddr, 0));
 			WR_FLUSH_GATT(pg);
 		}
 
@@ -448,7 +450,7 @@ static int i460_insert_memory_large_io_page (struct agp_memory *mem,
 		     idx < ((lp == end) ? (end_offset + 1) : I460_KPAGES_PER_IOPAGE);
 		     idx++, i++)
 		{
-			mem->memory[i] = lp->paddr + idx*PAGE_SIZE;
+			mem->pages[i] = lp->page;
 			__set_bit(idx, lp->alloced_map);
 			++lp->refcount;
 		}
@@ -463,7 +465,7 @@ static int i460_remove_memory_large_io_page (struct agp_memory *mem,
 	struct lp_desc *start, *end, *lp;
 	void *temp;
 
-	temp = agp_bridge->driver->current_size;
+	temp = agp_bridge->current_size;
 	num_entries = A_SIZE_8(temp)->num_entries;
 
 	/* Figure out what pg_start means in terms of our large GART pages */
@@ -477,7 +479,7 @@ static int i460_remove_memory_large_io_page (struct agp_memory *mem,
 		     idx < ((lp == end) ? (end_offset + 1) : I460_KPAGES_PER_IOPAGE);
 		     idx++, i++)
 		{
-			mem->memory[i] = 0;
+			mem->pages[i] = NULL;
 			__clear_bit(idx, lp->alloced_map);
 			--lp->refcount;
 		}
@@ -521,7 +523,7 @@ static int i460_remove_memory (struct agp_memory *mem,
  * Let's just hope nobody counts on the allocated AGP memory being there before bind time
  * (I don't think current drivers do)...
  */
-static void *i460_alloc_page (struct agp_bridge_data *bridge)
+static struct page *i460_alloc_page (struct agp_bridge_data *bridge)
 {
 	void *page;
 
@@ -534,7 +536,7 @@ static void *i460_alloc_page (struct agp_bridge_data *bridge)
 	return page;
 }
 
-static void i460_destroy_page (void *page, int flags)
+static void i460_destroy_page (struct page *page, int flags)
 {
 	if (I460_IO_PAGE_SHIFT <= PAGE_SHIFT) {
 		agp_generic_destroy_page(page, flags);
@@ -544,13 +546,20 @@ static void i460_destroy_page (void *page, int flags)
 #endif /* I460_LARGE_IO_PAGES */
 
 static unsigned long i460_mask_memory (struct agp_bridge_data *bridge,
-	unsigned long addr, int type)
+				       unsigned long addr, int type)
 {
 	/* Make sure the returned address is a valid GATT entry */
 	return bridge->driver->masks[0].mask
 		| (((addr & ~((1 << I460_IO_PAGE_SHIFT) - 1)) & 0xfffff000) >> 12);
 }
 
+static unsigned long i460_page_mask_memory(struct agp_bridge_data *bridge,
+					   struct page *page, int type)
+{
+	unsigned long addr = phys_to_gart(page_to_phys(page));
+	return i460_mask_memory(bridge, addr, type);
+}
+
 const struct agp_bridge_driver intel_i460_driver = {
 	.owner			= THIS_MODULE,
 	.aperture_sizes		= i460_sizes,
@@ -560,7 +569,7 @@ const struct agp_bridge_driver intel_i460_driver = {
 	.fetch_size		= i460_fetch_size,
 	.cleanup		= i460_cleanup,
 	.tlb_flush		= i460_tlb_flush,
-	.mask_memory		= i460_mask_memory,
+	.mask_memory		= i460_page_mask_memory,
 	.masks			= i460_masks,
 	.agp_enable		= agp_generic_enable,
 	.cache_flush		= global_cache_flush,
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index 7a748fa0dfc..8c9d50db5c3 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -257,7 +257,7 @@ static void intel_i810_agp_enable(struct agp_bridge_data *bridge, u32 mode)
 }
 
 /* Exists to support ARGB cursors */
-static void *i8xx_alloc_pages(void)
+static struct page *i8xx_alloc_pages(void)
 {
 	struct page *page;
 
@@ -272,17 +272,14 @@ static void *i8xx_alloc_pages(void)
 	}
 	get_page(page);
 	atomic_inc(&agp_bridge->current_memory_agp);
-	return page_address(page);
+	return page;
 }
 
-static void i8xx_destroy_pages(void *addr)
+static void i8xx_destroy_pages(struct page *page)
 {
-	struct page *page;
-
-	if (addr == NULL)
+	if (page == NULL)
 		return;
 
-	page = virt_to_page(addr);
 	set_pages_wb(page, 4);
 	put_page(page);
 	__free_pages(page, 2);
@@ -346,7 +343,7 @@ static int intel_i810_insert_entries(struct agp_memory *mem, off_t pg_start,
 			global_cache_flush();
 		for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
 			writel(agp_bridge->driver->mask_memory(agp_bridge,
-							       mem->memory[i],
+							       mem->pages[i],
 							       mask_type),
 			       intel_private.registers+I810_PTE_BASE+(j*4));
 		}
@@ -389,37 +386,37 @@ static int intel_i810_remove_entries(struct agp_memory *mem, off_t pg_start,
 static struct agp_memory *alloc_agpphysmem_i8xx(size_t pg_count, int type)
 {
 	struct agp_memory *new;
-	void *addr;
+	struct page *page;
 
 	switch (pg_count) {
-	case 1: addr = agp_bridge->driver->agp_alloc_page(agp_bridge);
+	case 1: page = agp_bridge->driver->agp_alloc_page(agp_bridge);
 		break;
 	case 4:
 		/* kludge to get 4 physical pages for ARGB cursor */
-		addr = i8xx_alloc_pages();
+		page = i8xx_alloc_pages();
 		break;
 	default:
 		return NULL;
 	}
 
-	if (addr == NULL)
+	if (page == NULL)
 		return NULL;
 
 	new = agp_create_memory(pg_count);
 	if (new == NULL)
 		return NULL;
 
-	new->memory[0] = virt_to_gart(addr);
+	new->pages[0] = page;
 	if (pg_count == 4) {
 		/* kludge to get 4 physical pages for ARGB cursor */
-		new->memory[1] = new->memory[0] + PAGE_SIZE;
-		new->memory[2] = new->memory[1] + PAGE_SIZE;
-		new->memory[3] = new->memory[2] + PAGE_SIZE;
+		new->pages[1] = new->pages[0] + 1;
+		new->pages[2] = new->pages[1] + 1;
+		new->pages[3] = new->pages[2] + 1;
 	}
 	new->page_count = pg_count;
 	new->num_scratch_pages = pg_count;
 	new->type = AGP_PHYS_MEMORY;
-	new->physical = new->memory[0];
+	new->physical = page_to_phys(new->pages[0]);
 	return new;
 }
 
@@ -451,13 +448,11 @@ static void intel_i810_free_by_type(struct agp_memory *curr)
 	agp_free_key(curr->key);
 	if (curr->type == AGP_PHYS_MEMORY) {
 		if (curr->page_count == 4)
-			i8xx_destroy_pages(gart_to_virt(curr->memory[0]));
+			i8xx_destroy_pages(curr->pages[0]);
 		else {
-			void *va = gart_to_virt(curr->memory[0]);
-
-			agp_bridge->driver->agp_destroy_page(va,
+			agp_bridge->driver->agp_destroy_page(curr->pages[0],
 							     AGP_PAGE_DESTROY_UNMAP);
-			agp_bridge->driver->agp_destroy_page(va,
+			agp_bridge->driver->agp_destroy_page(curr->pages[0],
 							     AGP_PAGE_DESTROY_FREE);
 		}
 		agp_free_page_array(curr);
@@ -466,8 +461,9 @@ static void intel_i810_free_by_type(struct agp_memory *curr)
 }
 
 static unsigned long intel_i810_mask_memory(struct agp_bridge_data *bridge,
-	unsigned long addr, int type)
+					    struct page *page, int type)
 {
+	unsigned long addr = phys_to_gart(page_to_phys(page));
 	/* Type checking must be done elsewhere */
 	return addr | bridge->driver->masks[type].mask;
 }
@@ -855,7 +851,7 @@ static int intel_i830_insert_entries(struct agp_memory *mem, off_t pg_start,
 
 	for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
 		writel(agp_bridge->driver->mask_memory(agp_bridge,
-						       mem->memory[i], mask_type),
+						       mem->pages[i], mask_type),
 		       intel_private.registers+I810_PTE_BASE+(j*4));
 	}
 	readl(intel_private.registers+I810_PTE_BASE+((j-1)*4));
@@ -1085,7 +1081,7 @@ static int intel_i915_insert_entries(struct agp_memory *mem, off_t pg_start,
 
 	for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
 		writel(agp_bridge->driver->mask_memory(agp_bridge,
-			mem->memory[i], mask_type), intel_private.gtt+j);
+						       mem->pages[i], mask_type), intel_private.gtt+j);
 	}
 
 	readl(intel_private.gtt+j-1);
@@ -1200,8 +1196,9 @@ static int intel_i915_create_gatt_table(struct agp_bridge_data *bridge)
  * this conditional.
  */
 static unsigned long intel_i965_mask_memory(struct agp_bridge_data *bridge,
-	unsigned long addr, int type)
+					    struct page *page, int type)
 {
+	dma_addr_t addr = phys_to_gart(page_to_phys(page));
 	/* Shift high bits down */
 	addr |= (addr >> 28) & 0xf0;
 
diff --git a/drivers/char/agp/nvidia-agp.c b/drivers/char/agp/nvidia-agp.c
index 16acee2de11..263d71dd441 100644
--- a/drivers/char/agp/nvidia-agp.c
+++ b/drivers/char/agp/nvidia-agp.c
@@ -225,7 +225,7 @@ static int nvidia_insert_memory(struct agp_memory *mem, off_t pg_start, int type
 	}
 	for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
 		writel(agp_bridge->driver->mask_memory(agp_bridge,
-			mem->memory[i], mask_type),
+			mem->pages[i], mask_type),
 			agp_bridge->gatt_table+nvidia_private.pg_offset+j);
 	}
 
diff --git a/drivers/char/agp/parisc-agp.c b/drivers/char/agp/parisc-agp.c
index 699e3422ad9..f4bb43fb801 100644
--- a/drivers/char/agp/parisc-agp.c
+++ b/drivers/char/agp/parisc-agp.c
@@ -31,6 +31,10 @@
 #define AGP8X_MODE_BIT		3
 #define AGP8X_MODE		(1 << AGP8X_MODE_BIT)
 
+static unsigned long
+parisc_agp_mask_memory(struct agp_bridge_data *bridge, unsigned long addr,
+		       int type);
+
 static struct _parisc_agp_info {
 	void __iomem *ioc_regs;
 	void __iomem *lba_regs;
@@ -149,12 +153,12 @@ parisc_agp_insert_memory(struct agp_memory *mem, off_t pg_start, int type)
 	for (i = 0, j = io_pg_start; i < mem->page_count; i++) {
 		unsigned long paddr;
 
-		paddr = mem->memory[i];
+		paddr = page_to_phys(mem->pages[i]);
 		for (k = 0;
 		     k < info->io_pages_per_kpage;
 		     k++, j++, paddr += info->io_page_size) {
 			info->gatt[j] =
-				agp_bridge->driver->mask_memory(agp_bridge,
+				parisc_agp_mask_memory(agp_bridge,
 					paddr, type);
 		}
 	}
@@ -185,9 +189,17 @@ parisc_agp_remove_memory(struct agp_memory *mem, off_t pg_start, int type)
 }
 
 static unsigned long
-parisc_agp_mask_memory(struct agp_bridge_data *bridge,
-		    unsigned long addr, int type)
+parisc_agp_mask_memory(struct agp_bridge_data *bridge, unsigned long addr,
+		       int type)
+{
+	return SBA_PDIR_VALID_BIT | addr;
+}
+
+static unsigned long
+parisc_agp_page_mask_memory(struct agp_bridge_data *bridge, struct page *page,
+			    int type)
 {
+	unsigned long addr = phys_to_gart(page_to_phys(page));
 	return SBA_PDIR_VALID_BIT | addr;
 }
 
diff --git a/drivers/char/agp/sgi-agp.c b/drivers/char/agp/sgi-agp.c
index b972d83bb1b..d3ea2e4226b 100644
--- a/drivers/char/agp/sgi-agp.c
+++ b/drivers/char/agp/sgi-agp.c
@@ -38,7 +38,7 @@ static struct aper_size_info_fixed sgi_tioca_sizes[] = {
 	{0, 0, 0},
 };
 
-static void *sgi_tioca_alloc_page(struct agp_bridge_data *bridge)
+static struct page *sgi_tioca_alloc_page(struct agp_bridge_data *bridge)
 {
 	struct page *page;
 	int nid;
@@ -52,7 +52,7 @@ static void *sgi_tioca_alloc_page(struct agp_bridge_data *bridge)
 
 	get_page(page);
 	atomic_inc(&agp_bridge->current_memory_agp);
-	return page_address(page);
+	return page;
 }
 
 /*
@@ -71,8 +71,9 @@ static void sgi_tioca_tlbflush(struct agp_memory *mem)
  */
 static unsigned long
 sgi_tioca_mask_memory(struct agp_bridge_data *bridge,
-		      unsigned long addr, int type)
+		      struct page *page, int type)
 {
+	unsigned long addr = phys_to_gart(page_to_phys(page));
 	return tioca_physpage_to_gart(addr);
 }
 
@@ -189,7 +190,7 @@ static int sgi_tioca_insert_memory(struct agp_memory *mem, off_t pg_start,
 
 	for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
 		table[j] =
-		    bridge->driver->mask_memory(bridge, mem->memory[i],
+		    bridge->driver->mask_memory(bridge, mem->pages[i],
 						mem->type);
 	}
 
diff --git a/drivers/char/agp/sworks-agp.c b/drivers/char/agp/sworks-agp.c
index 6224df8b7f0..b964a219932 100644
--- a/drivers/char/agp/sworks-agp.c
+++ b/drivers/char/agp/sworks-agp.c
@@ -349,7 +349,7 @@ static int serverworks_insert_memory(struct agp_memory *mem,
 	for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
 		addr = (j * PAGE_SIZE) + agp_bridge->gart_bus_addr;
 		cur_gatt = SVRWRKS_GET_GATT(addr);
-		writel(agp_bridge->driver->mask_memory(agp_bridge, mem->memory[i], mem->type), cur_gatt+GET_GATT_OFF(addr));
+		writel(agp_bridge->driver->mask_memory(agp_bridge, mem->pages[i], mem->type), cur_gatt+GET_GATT_OFF(addr));
 	}
 	serverworks_tlbflush(mem);
 	return 0;
diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c
index 03f95ec08f5..f192c3b9ad4 100644
--- a/drivers/char/agp/uninorth-agp.c
+++ b/drivers/char/agp/uninorth-agp.c
@@ -146,13 +146,20 @@ static int uninorth_insert_memory(struct agp_memory *mem, off_t pg_start,
 {
 	int i, j, num_entries;
 	void *temp;
+	int mask_type;
 
 	temp = agp_bridge->current_size;
 	num_entries = A_SIZE_32(temp)->num_entries;
 
-	if (type != 0 || mem->type != 0)
+	if (type != mem->type)
+		return -EINVAL;
+
+	mask_type = agp_bridge->driver->agp_type_to_mask_type(agp_bridge, type);
+	if (mask_type != 0) {
 		/* We know nothing of memory types */
 		return -EINVAL;
+	}
+
 	if ((pg_start + mem->page_count) > num_entries)
 		return -EINVAL;
 
@@ -166,9 +173,9 @@ static int uninorth_insert_memory(struct agp_memory *mem, off_t pg_start,
 
 	for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
 		agp_bridge->gatt_table[j] =
-		    cpu_to_le32((mem->memory[i] & 0xFFFFF000UL) | 0x1UL);
-		flush_dcache_range((unsigned long)__va(mem->memory[i]),
-				   (unsigned long)__va(mem->memory[i])+0x1000);
+			cpu_to_le32((page_to_phys(mem->pages[i]) & 0xFFFFF000UL) | 0x1UL);
+		flush_dcache_range((unsigned long)__va(page_to_phys(mem->pages[i])),
+				   (unsigned long)__va(page_to_phys(mem->pages[i]))+0x1000);
 	}
 	(void)in_le32((volatile u32*)&agp_bridge->gatt_table[pg_start]);
 	mb();
@@ -184,13 +191,20 @@ static int u3_insert_memory(struct agp_memory *mem, off_t pg_start, int type)
 	int i, num_entries;
 	void *temp;
 	u32 *gp;
+	int mask_type;
 
 	temp = agp_bridge->current_size;
 	num_entries = A_SIZE_32(temp)->num_entries;
 
-	if (type != 0 || mem->type != 0)
+	if (type != mem->type)
+		return -EINVAL;
+
+	mask_type = agp_bridge->driver->agp_type_to_mask_type(agp_bridge, type);
+	if (mask_type != 0) {
 		/* We know nothing of memory types */
 		return -EINVAL;
+	}
+
 	if ((pg_start + mem->page_count) > num_entries)
 		return -EINVAL;
 
@@ -205,9 +219,9 @@ static int u3_insert_memory(struct agp_memory *mem, off_t pg_start, int type)
 	}
 
 	for (i = 0; i < mem->page_count; i++) {
-		gp[i] = (mem->memory[i] >> PAGE_SHIFT) | 0x80000000UL;
-		flush_dcache_range((unsigned long)__va(mem->memory[i]),
-				   (unsigned long)__va(mem->memory[i])+0x1000);
+		gp[i] = (page_to_phys(mem->pages[i]) >> PAGE_SHIFT) | 0x80000000UL;
+		flush_dcache_range((unsigned long)__va(page_to_phys(mem->pages[i])),
+				   (unsigned long)__va(page_to_phys(mem->pages[i]))+0x1000);
 	}
 	mb();
 	flush_dcache_range((unsigned long)gp, (unsigned long) &gp[i]);
diff --git a/drivers/char/bfin_jtag_comm.c b/drivers/char/bfin_jtag_comm.c
index 44c113d5604..1d7c34c73b2 100644
--- a/drivers/char/bfin_jtag_comm.c
+++ b/drivers/char/bfin_jtag_comm.c
@@ -8,6 +8,10 @@
  * Licensed under the GPL-2 or later.
  */
 
+#define DRV_NAME "bfin-jtag-comm"
+#define DEV_NAME "ttyBFJC"
+#define pr_fmt(fmt) DRV_NAME ": " fmt
+
 #include <linux/circ_buf.h>
 #include <linux/console.h>
 #include <linux/delay.h>
@@ -22,18 +26,14 @@
 #include <linux/tty_flip.h>
 #include <asm/atomic.h>
 
+#define pr_init(fmt, args...) ({ static const __initconst char __fmt[] = fmt; printk(__fmt, ## args); })
+
 /* See the Debug/Emulation chapter in the HRM */
 #define EMUDOF   0x00000001	/* EMUDAT_OUT full & valid */
 #define EMUDIF   0x00000002	/* EMUDAT_IN full & valid */
 #define EMUDOOVF 0x00000004	/* EMUDAT_OUT overflow */
 #define EMUDIOVF 0x00000008	/* EMUDAT_IN overflow */
 
-#define DRV_NAME "bfin-jtag-comm"
-#define DEV_NAME "ttyBFJC"
-
-#define pr_init(fmt, args...) ({ static const __initdata char __fmt[] = fmt; printk(__fmt, ## args); })
-#define debug(fmt, args...) pr_debug(DRV_NAME ": " fmt, ## args)
-
 static inline uint32_t bfin_write_emudat(uint32_t emudat)
 {
 	__asm__ __volatile__("emudat = %0;" : : "d"(emudat));
@@ -74,7 +74,7 @@ bfin_jc_emudat_manager(void *arg)
 	while (!kthread_should_stop()) {
 		/* no one left to give data to, so sleep */
 		if (bfin_jc_tty == NULL && circ_empty(&bfin_jc_write_buf)) {
-			debug("waiting for readers\n");
+			pr_debug("waiting for readers\n");
 			__set_current_state(TASK_UNINTERRUPTIBLE);
 			schedule();
 			__set_current_state(TASK_RUNNING);
@@ -82,7 +82,7 @@ bfin_jc_emudat_manager(void *arg)
 
 		/* no data available, so just chill */
 		if (!(bfin_read_DBGSTAT() & EMUDIF) && circ_empty(&bfin_jc_write_buf)) {
-			debug("waiting for data (in_len = %i) (circ: %i %i)\n",
+			pr_debug("waiting for data (in_len = %i) (circ: %i %i)\n",
 				inbound_len, bfin_jc_write_buf.tail, bfin_jc_write_buf.head);
 			if (inbound_len)
 				schedule();
@@ -99,11 +99,11 @@ bfin_jc_emudat_manager(void *arg)
 			if (tty != NULL) {
 				uint32_t emudat = bfin_read_emudat();
 				if (inbound_len == 0) {
-					debug("incoming length: 0x%08x\n", emudat);
+					pr_debug("incoming length: 0x%08x\n", emudat);
 					inbound_len = emudat;
 				} else {
 					size_t num_chars = (4 <= inbound_len ? 4 : inbound_len);
-					debug("  incoming data: 0x%08x (pushing %zu)\n", emudat, num_chars);
+					pr_debug("  incoming data: 0x%08x (pushing %zu)\n", emudat, num_chars);
 					inbound_len -= num_chars;
 					tty_insert_flip_string(tty, (unsigned char *)&emudat, num_chars);
 					tty_flip_buffer_push(tty);
@@ -117,7 +117,7 @@ bfin_jc_emudat_manager(void *arg)
 			if (outbound_len == 0) {
 				outbound_len = circ_cnt(&bfin_jc_write_buf);
 				bfin_write_emudat(outbound_len);
-				debug("outgoing length: 0x%08x\n", outbound_len);
+				pr_debug("outgoing length: 0x%08x\n", outbound_len);
 			} else {
 				struct tty_struct *tty;
 				int tail = bfin_jc_write_buf.tail;
@@ -136,7 +136,7 @@ bfin_jc_emudat_manager(void *arg)
 				if (tty)
 					tty_wakeup(tty);
 				mutex_unlock(&bfin_jc_tty_mutex);
-				debug("  outgoing data: 0x%08x (pushing %zu)\n", emudat, ate);
+				pr_debug("  outgoing data: 0x%08x (pushing %zu)\n", emudat, ate);
 			}
 		}
 	}
@@ -149,7 +149,7 @@ static int
 bfin_jc_open(struct tty_struct *tty, struct file *filp)
 {
 	mutex_lock(&bfin_jc_tty_mutex);
-	debug("open %lu\n", bfin_jc_count);
+	pr_debug("open %lu\n", bfin_jc_count);
 	++bfin_jc_count;
 	bfin_jc_tty = tty;
 	wake_up_process(bfin_jc_kthread);
@@ -161,7 +161,7 @@ static void
 bfin_jc_close(struct tty_struct *tty, struct file *filp)
 {
 	mutex_lock(&bfin_jc_tty_mutex);
-	debug("close %lu\n", bfin_jc_count);
+	pr_debug("close %lu\n", bfin_jc_count);
 	if (--bfin_jc_count == 0)
 		bfin_jc_tty = NULL;
 	wake_up_process(bfin_jc_kthread);
@@ -174,7 +174,7 @@ bfin_jc_circ_write(const unsigned char *buf, int count)
 {
 	int i;
 	count = min(count, circ_free(&bfin_jc_write_buf));
-	debug("going to write chunk of %i bytes\n", count);
+	pr_debug("going to write chunk of %i bytes\n", count);
 	for (i = 0; i < count; ++i)
 		circ_byte(&bfin_jc_write_buf, bfin_jc_write_buf.head + i) = buf[i];
 	bfin_jc_write_buf.head += i;
diff --git a/drivers/char/dtlk.c b/drivers/char/dtlk.c
index 6b900b297cc..52e06589821 100644
--- a/drivers/char/dtlk.c
+++ b/drivers/char/dtlk.c
@@ -571,7 +571,7 @@ static char dtlk_read_tts(void)
 		portval = inb_p(dtlk_port_tts);
 	} while ((portval & TTS_READABLE) == 0 &&
 		 retries++ < DTLK_MAX_RETRIES);
-	if (retries == DTLK_MAX_RETRIES)
+	if (retries > DTLK_MAX_RETRIES)
 		printk(KERN_ERR "dtlk_read_tts() timeout\n");
 
 	ch = inb_p(dtlk_port_tts);	/* input from TTS port */
@@ -583,7 +583,7 @@ static char dtlk_read_tts(void)
 		portval = inb_p(dtlk_port_tts);
 	} while ((portval & TTS_READABLE) != 0 &&
 		 retries++ < DTLK_MAX_RETRIES);
-	if (retries == DTLK_MAX_RETRIES)
+	if (retries > DTLK_MAX_RETRIES)
 		printk(KERN_ERR "dtlk_read_tts() timeout\n");
 
 	TRACE_RET;
@@ -640,7 +640,7 @@ static char dtlk_write_tts(char ch)
 		while ((inb_p(dtlk_port_tts) & TTS_WRITABLE) == 0 &&
 		       retries++ < DTLK_MAX_RETRIES)	/* DT ready? */
 			;
-	if (retries == DTLK_MAX_RETRIES)
+	if (retries > DTLK_MAX_RETRIES)
 		printk(KERN_ERR "dtlk_write_tts() timeout\n");
 
 	outb_p(ch, dtlk_port_tts);	/* output to TTS port */
diff --git a/drivers/char/hvc_iseries.c b/drivers/char/hvc_iseries.c
index 449727b6166..936d05bf37f 100644
--- a/drivers/char/hvc_iseries.c
+++ b/drivers/char/hvc_iseries.c
@@ -241,7 +241,7 @@ static int __devexit hvc_vio_remove(struct vio_dev *vdev)
 static struct vio_driver hvc_vio_driver = {
 	.id_table	= hvc_driver_table,
 	.probe		= hvc_vio_probe,
-	.remove		= hvc_vio_remove,
+	.remove		= __devexit_p(hvc_vio_remove),
 	.driver		= {
 		.name	= hvc_driver_name,
 		.owner	= THIS_MODULE,
diff --git a/drivers/char/hvc_vio.c b/drivers/char/hvc_vio.c
index bd62dc86b47..c72b994652a 100644
--- a/drivers/char/hvc_vio.c
+++ b/drivers/char/hvc_vio.c
@@ -113,7 +113,7 @@ static int __devexit hvc_vio_remove(struct vio_dev *vdev)
 static struct vio_driver hvc_vio_driver = {
 	.id_table	= hvc_driver_table,
 	.probe		= hvc_vio_probe,
-	.remove		= hvc_vio_remove,
+	.remove		= __devexit_p(hvc_vio_remove),
 	.driver		= {
 		.name	= hvc_driver_name,
 		.owner	= THIS_MODULE,
diff --git a/drivers/char/hvcs.c b/drivers/char/hvcs.c
index 7d64e4230e6..266b858b8f8 100644
--- a/drivers/char/hvcs.c
+++ b/drivers/char/hvcs.c
@@ -868,7 +868,7 @@ static int __devexit hvcs_remove(struct vio_dev *dev)
 static struct vio_driver hvcs_vio_driver = {
 	.id_table	= hvcs_driver_table,
 	.probe		= hvcs_probe,
-	.remove		= hvcs_remove,
+	.remove		= __devexit_p(hvcs_remove),
 	.driver		= {
 		.name	= hvcs_driver_name,
 		.owner	= THIS_MODULE,
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index 4d745a89504..4159292e35c 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -1593,7 +1593,7 @@ static unsigned int card_count;
 static int __devinit isicom_probe(struct pci_dev *pdev,
 	const struct pci_device_id *ent)
 {
-	unsigned int signature, index;
+	unsigned int uninitialized_var(signature), index;
 	int retval = -EPERM;
 	struct isi_board *board = NULL;
 
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index e18800c400b..0c999f5bb3d 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -3785,7 +3785,7 @@ err:
 	return retval;
 }
 
-static void stli_pciremove(struct pci_dev *pdev)
+static void __devexit stli_pciremove(struct pci_dev *pdev)
 {
 	struct stlibrd *brdp = pci_get_drvdata(pdev);
 
diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c
index de26a978fbd..737be953cc5 100644
--- a/drivers/char/keyboard.c
+++ b/drivers/char/keyboard.c
@@ -1123,8 +1123,6 @@ static int emulate_raw(struct vc_data *vc, unsigned int keycode,
 
 #define HW_RAW(dev)	0
 
-#warning "Cannot generate rawmode keyboard for your architecture yet."
-
 static int emulate_raw(struct vc_data *vc, unsigned int keycode, unsigned char up_flag)
 {
 	if (keycode > 127)
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index f96d0bef855..afa8813e737 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -863,59 +863,58 @@ static const struct file_operations kmsg_fops = {
 	.write =	kmsg_write,
 };
 
-static int memory_open(struct inode * inode, struct file * filp)
-{
-	int ret = 0;
-
-	lock_kernel();
-	switch (iminor(inode)) {
-		case 1:
-			filp->f_op = &mem_fops;
-			filp->f_mapping->backing_dev_info =
-				&directly_mappable_cdev_bdi;
-			break;
+static const struct {
+	unsigned int		minor;
+	char			*name;
+	umode_t			mode;
+	const struct file_operations	*fops;
+	struct backing_dev_info	*dev_info;
+} devlist[] = { /* list of minor devices */
+	{1, "mem",     S_IRUSR | S_IWUSR | S_IRGRP, &mem_fops,
+		&directly_mappable_cdev_bdi},
 #ifdef CONFIG_DEVKMEM
-		case 2:
-			filp->f_op = &kmem_fops;
-			filp->f_mapping->backing_dev_info =
-				&directly_mappable_cdev_bdi;
-			break;
+	{2, "kmem",    S_IRUSR | S_IWUSR | S_IRGRP, &kmem_fops,
+		&directly_mappable_cdev_bdi},
 #endif
-		case 3:
-			filp->f_op = &null_fops;
-			break;
+	{3, "null",    S_IRUGO | S_IWUGO,           &null_fops, NULL},
 #ifdef CONFIG_DEVPORT
-		case 4:
-			filp->f_op = &port_fops;
-			break;
+	{4, "port",    S_IRUSR | S_IWUSR | S_IRGRP, &port_fops, NULL},
 #endif
-		case 5:
-			filp->f_mapping->backing_dev_info = &zero_bdi;
-			filp->f_op = &zero_fops;
-			break;
-		case 7:
-			filp->f_op = &full_fops;
-			break;
-		case 8:
-			filp->f_op = &random_fops;
-			break;
-		case 9:
-			filp->f_op = &urandom_fops;
-			break;
-		case 11:
-			filp->f_op = &kmsg_fops;
-			break;
+	{5, "zero",    S_IRUGO | S_IWUGO,           &zero_fops, &zero_bdi},
+	{7, "full",    S_IRUGO | S_IWUGO,           &full_fops, NULL},
+	{8, "random",  S_IRUGO | S_IWUSR,           &random_fops, NULL},
+	{9, "urandom", S_IRUGO | S_IWUSR,           &urandom_fops, NULL},
+	{11,"kmsg",    S_IRUGO | S_IWUSR,           &kmsg_fops, NULL},
 #ifdef CONFIG_CRASH_DUMP
-		case 12:
-			filp->f_op = &oldmem_fops;
-			break;
+	{12,"oldmem",    S_IRUSR | S_IWUSR | S_IRGRP, &oldmem_fops, NULL},
 #endif
-		default:
-			unlock_kernel();
-			return -ENXIO;
+};
+
+static int memory_open(struct inode *inode, struct file *filp)
+{
+	int ret = 0;
+	int i;
+
+	lock_kernel();
+
+	for (i = 0; i < ARRAY_SIZE(devlist); i++) {
+		if (devlist[i].minor == iminor(inode)) {
+			filp->f_op = devlist[i].fops;
+			if (devlist[i].dev_info) {
+				filp->f_mapping->backing_dev_info =
+					devlist[i].dev_info;
+			}
+
+			break;
+		}
 	}
-	if (filp->f_op && filp->f_op->open)
-		ret = filp->f_op->open(inode,filp);
+
+	if (i == ARRAY_SIZE(devlist))
+		ret = -ENXIO;
+	else
+		if (filp->f_op && filp->f_op->open)
+			ret = filp->f_op->open(inode, filp);
+
 	unlock_kernel();
 	return ret;
 }
@@ -924,30 +923,6 @@ static const struct file_operations memory_fops = {
 	.open		= memory_open,	/* just a selector for the real open */
 };
 
-static const struct {
-	unsigned int		minor;
-	char			*name;
-	umode_t			mode;
-	const struct file_operations	*fops;
-} devlist[] = { /* list of minor devices */
-	{1, "mem",     S_IRUSR | S_IWUSR | S_IRGRP, &mem_fops},
-#ifdef CONFIG_DEVKMEM
-	{2, "kmem",    S_IRUSR | S_IWUSR | S_IRGRP, &kmem_fops},
-#endif
-	{3, "null",    S_IRUGO | S_IWUGO,           &null_fops},
-#ifdef CONFIG_DEVPORT
-	{4, "port",    S_IRUSR | S_IWUSR | S_IRGRP, &port_fops},
-#endif
-	{5, "zero",    S_IRUGO | S_IWUGO,           &zero_fops},
-	{7, "full",    S_IRUGO | S_IWUGO,           &full_fops},
-	{8, "random",  S_IRUGO | S_IWUSR,           &random_fops},
-	{9, "urandom", S_IRUGO | S_IWUSR,           &urandom_fops},
-	{11,"kmsg",    S_IRUGO | S_IWUSR,           &kmsg_fops},
-#ifdef CONFIG_CRASH_DUMP
-	{12,"oldmem",    S_IRUSR | S_IWUSR | S_IRGRP, &oldmem_fops},
-#endif
-};
-
 static struct class *mem_class;
 
 static int __init chr_dev_init(void)
diff --git a/drivers/char/n_hdlc.c b/drivers/char/n_hdlc.c
index 461ece591a5..1c43c8cdee2 100644
--- a/drivers/char/n_hdlc.c
+++ b/drivers/char/n_hdlc.c
@@ -10,7 +10,6 @@
  *	Paul Mackerras <Paul.Mackerras@cs.anu.edu.au>
  *
  * Original release 01/11/99
- * $Id: n_hdlc.c,v 4.8 2003/05/06 21:18:51 paulkf Exp $
  *
  * This code is released under the GNU General Public License (GPL)
  *
@@ -79,7 +78,6 @@
  */
 
 #define HDLC_MAGIC 0x239e
-#define HDLC_VERSION "$Revision: 4.8 $"
 
 #include <linux/module.h>
 #include <linux/init.h>
@@ -114,7 +112,7 @@
 #define MAX_HDLC_FRAME_SIZE 65535 
 #define DEFAULT_RX_BUF_COUNT 10
 #define MAX_RX_BUF_COUNT 60
-#define DEFAULT_TX_BUF_COUNT 1
+#define DEFAULT_TX_BUF_COUNT 3
 
 struct n_hdlc_buf {
 	struct n_hdlc_buf *link;
@@ -199,6 +197,31 @@ static void n_hdlc_tty_wakeup(struct tty_struct *tty);
 #define tty2n_hdlc(tty)	((struct n_hdlc *) ((tty)->disc_data))
 #define n_hdlc2tty(n_hdlc)	((n_hdlc)->tty)
 
+static void flush_rx_queue(struct tty_struct *tty)
+{
+	struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
+	struct n_hdlc_buf *buf;
+
+	while ((buf = n_hdlc_buf_get(&n_hdlc->rx_buf_list)))
+		n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, buf);
+}
+
+static void flush_tx_queue(struct tty_struct *tty)
+{
+	struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
+	struct n_hdlc_buf *buf;
+	unsigned long flags;
+
+	while ((buf = n_hdlc_buf_get(&n_hdlc->tx_buf_list)))
+		n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, buf);
+ 	spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
+	if (n_hdlc->tbuf) {
+		n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, n_hdlc->tbuf);
+		n_hdlc->tbuf = NULL;
+	}
+	spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
+}
+
 static struct tty_ldisc_ops n_hdlc_ldisc = {
 	.owner		= THIS_MODULE,
 	.magic		= TTY_LDISC_MAGIC,
@@ -211,6 +234,7 @@ static struct tty_ldisc_ops n_hdlc_ldisc = {
 	.poll		= n_hdlc_tty_poll,
 	.receive_buf	= n_hdlc_tty_receive,
 	.write_wakeup	= n_hdlc_tty_wakeup,
+	.flush_buffer   = flush_rx_queue,
 };
 
 /**
@@ -341,10 +365,7 @@ static int n_hdlc_tty_open (struct tty_struct *tty)
 	set_bit(TTY_NO_WRITE_SPLIT,&tty->flags);
 #endif
 	
-	/* Flush any pending characters in the driver and discipline. */
-	if (tty->ldisc->ops->flush_buffer)
-		tty->ldisc->ops->flush_buffer(tty);
-
+	/* flush receive data from driver */
 	tty_driver_flush_buffer(tty);
 		
 	if (debuglevel >= DEBUG_LEVEL_INFO)	
@@ -763,6 +784,14 @@ static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
 		error = put_user(count, (int __user *)arg);
 		break;
 
+	case TCFLSH:
+		switch (arg) {
+		case TCIOFLUSH:
+		case TCOFLUSH:
+			flush_tx_queue(tty);
+		}
+		/* fall through to default */
+
 	default:
 		error = n_tty_ioctl_helper(tty, file, cmd, arg);
 		break;
@@ -919,8 +948,7 @@ static struct n_hdlc_buf* n_hdlc_buf_get(struct n_hdlc_buf_list *list)
 }	/* end of n_hdlc_buf_get() */
 
 static char hdlc_banner[] __initdata =
-	KERN_INFO "HDLC line discipline: version " HDLC_VERSION
-	", maxframe=%u\n";
+	KERN_INFO "HDLC line discipline maxframe=%u\n";
 static char hdlc_register_ok[] __initdata =
 	KERN_INFO "N_HDLC line discipline registered.\n";
 static char hdlc_register_fail[] __initdata =
diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c
index d2e93e34322..2e99158ebb8 100644
--- a/drivers/char/n_r3964.c
+++ b/drivers/char/n_r3964.c
@@ -1062,7 +1062,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file,
 	struct r3964_client_info *pClient;
 	struct r3964_message *pMsg;
 	struct r3964_client_message theMsg;
-	int count;
+	int ret;
 
 	TRACE_L("read()");
 
@@ -1074,8 +1074,8 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file,
 		if (pMsg == NULL) {
 			/* no messages available. */
 			if (file->f_flags & O_NONBLOCK) {
-				unlock_kernel();
-				return -EAGAIN;
+				ret = -EAGAIN;
+				goto unlock;
 			}
 			/* block until there is a message: */
 			wait_event_interruptible(pInfo->read_wait,
@@ -1085,29 +1085,31 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file,
 		/* If we still haven't got a message, we must have been signalled */
 
 		if (!pMsg) {
-			unlock_kernel();
-			return -EINTR;
+			ret = -EINTR;
+			goto unlock;
 		}
 
 		/* deliver msg to client process: */
 		theMsg.msg_id = pMsg->msg_id;
 		theMsg.arg = pMsg->arg;
 		theMsg.error_code = pMsg->error_code;
-		count = sizeof(struct r3964_client_message);
+		ret = sizeof(struct r3964_client_message);
 
 		kfree(pMsg);
 		TRACE_M("r3964_read - msg kfree %p", pMsg);
 
-		if (copy_to_user(buf, &theMsg, count)) {
-			unlock_kernel();
-			return -EFAULT;
+		if (copy_to_user(buf, &theMsg, ret)) {
+			ret = -EFAULT;
+			goto unlock;
 		}
 
-		TRACE_PS("read - return %d", count);
-		return count;
+		TRACE_PS("read - return %d", ret);
+		goto unlock;
 	}
+	ret = -EPERM;
+unlock:
 	unlock_kernel();
-	return -EPERM;
+	return ret;
 }
 
 static ssize_t r3964_write(struct tty_struct *tty, struct file *file,
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index dbb91257456..881934c068c 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -1575,7 +1575,8 @@ static long cmm_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 		clear_bit(LOCK_IO, &dev->flags);
 		wake_up_interruptible(&dev->ioq);
 
-		return 0;
+		rc = 0;
+		break;
 	case CM_IOCSPTS:
 		{
 			struct ptsreq krnptsreq;
diff --git a/drivers/char/ppdev.c b/drivers/char/ppdev.c
index c84c34fb123..432655bcb04 100644
--- a/drivers/char/ppdev.c
+++ b/drivers/char/ppdev.c
@@ -114,8 +114,7 @@ static ssize_t pp_read (struct file * file, char __user * buf, size_t count,
 
 	if (!(pp->flags & PP_CLAIMED)) {
 		/* Don't have the port claimed */
-		printk (KERN_DEBUG CHRDEV "%x: claim the port first\n",
-			minor);
+		pr_debug(CHRDEV "%x: claim the port first\n", minor);
 		return -EINVAL;
 	}
 
@@ -198,8 +197,7 @@ static ssize_t pp_write (struct file * file, const char __user * buf,
 
 	if (!(pp->flags & PP_CLAIMED)) {
 		/* Don't have the port claimed */
-		printk (KERN_DEBUG CHRDEV "%x: claim the port first\n",
-			minor);
+		pr_debug(CHRDEV "%x: claim the port first\n", minor);
 		return -EINVAL;
 	}
 
@@ -313,7 +311,7 @@ static int register_device (int minor, struct pp_struct *pp)
 	}
 
 	pp->pdev = pdev;
-	printk (KERN_DEBUG "%s: registered pardevice\n", name);
+	pr_debug("%s: registered pardevice\n", name);
 	return 0;
 }
 
@@ -343,8 +341,7 @@ static int pp_do_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		int ret;
 
 		if (pp->flags & PP_CLAIMED) {
-			printk (KERN_DEBUG CHRDEV
-				"%x: you've already got it!\n", minor);
+			pr_debug(CHRDEV "%x: you've already got it!\n", minor);
 			return -EINVAL;
 		}
 
@@ -379,7 +376,7 @@ static int pp_do_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	    }
 	case PPEXCL:
 		if (pp->pdev) {
-			printk (KERN_DEBUG CHRDEV "%x: too late for PPEXCL; "
+			pr_debug(CHRDEV "%x: too late for PPEXCL; "
 				"already registered\n", minor);
 			if (pp->flags & PP_EXCL)
 				/* But it's not really an error. */
@@ -491,8 +488,7 @@ static int pp_do_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	/* Everything else requires the port to be claimed, so check
 	 * that now. */
 	if ((pp->flags & PP_CLAIMED) == 0) {
-		printk (KERN_DEBUG CHRDEV "%x: claim the port first\n",
-			minor);
+		pr_debug(CHRDEV "%x: claim the port first\n", minor);
 		return -EINVAL;
 	}
 
@@ -624,8 +620,7 @@ static int pp_do_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		return 0;
 
 	default:
-		printk (KERN_DEBUG CHRDEV "%x: What? (cmd=0x%x)\n", minor,
-			cmd);
+		pr_debug(CHRDEV "%x: What? (cmd=0x%x)\n", minor, cmd);
 		return -EINVAL;
 	}
 
@@ -698,9 +693,8 @@ static int pp_release (struct inode * inode, struct file * file)
 	}
 	if (compat_negot) {
 		parport_negotiate (pp->pdev->port, IEEE1284_MODE_COMPAT);
-		printk (KERN_DEBUG CHRDEV
-			"%x: negotiated back to compatibility mode because "
-			"user-space forgot\n", minor);
+		pr_debug(CHRDEV "%x: negotiated back to compatibility "
+			"mode because user-space forgot\n", minor);
 	}
 
 	if (pp->flags & PP_CLAIMED) {
@@ -713,7 +707,7 @@ static int pp_release (struct inode * inode, struct file * file)
 		info->phase = pp->saved_state.phase;
 		parport_release (pp->pdev);
 		if (compat_negot != 1) {
-			printk (KERN_DEBUG CHRDEV "%x: released pardevice "
+			pr_debug(CHRDEV "%x: released pardevice "
 				"because user-space forgot\n", minor);
 		}
 	}
@@ -723,8 +717,7 @@ static int pp_release (struct inode * inode, struct file * file)
 		parport_unregister_device (pp->pdev);
 		kfree (name);
 		pp->pdev = NULL;
-		printk (KERN_DEBUG CHRDEV "%x: unregistered pardevice\n",
-			minor);
+		pr_debug(CHRDEV "%x: unregistered pardevice\n", minor);
 	}
 
 	kfree (pp);
diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c
index 39a05b5fa9c..0db35857e4d 100644
--- a/drivers/char/sysrq.c
+++ b/drivers/char/sysrq.c
@@ -121,20 +121,17 @@ static struct sysrq_key_op sysrq_unraw_op = {
 #define sysrq_unraw_op (*(struct sysrq_key_op *)0)
 #endif /* CONFIG_VT */
 
-#ifdef CONFIG_KEXEC
-static void sysrq_handle_crashdump(int key, struct tty_struct *tty)
+static void sysrq_handle_crash(int key, struct tty_struct *tty)
 {
-	crash_kexec(get_irq_regs());
+	char *killer = NULL;
+	*killer = 1;
 }
 static struct sysrq_key_op sysrq_crashdump_op = {
-	.handler	= sysrq_handle_crashdump,
-	.help_msg	= "Crashdump",
-	.action_msg	= "Trigger a crashdump",
+	.handler	= sysrq_handle_crash,
+	.help_msg	= "Crash",
+	.action_msg	= "Trigger a crash",
 	.enable_mask	= SYSRQ_ENABLE_DUMP,
 };
-#else
-#define sysrq_crashdump_op (*(struct sysrq_key_op *)0)
-#endif
 
 static void sysrq_handle_reboot(int key, struct tty_struct *tty)
 {
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index e6ce632a393..7539bed0f7e 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -396,7 +396,8 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
 	kbd = kbd_table + console;
 	switch (cmd) {
 	case TIOCLINUX:
-		return tioclinux(tty, arg);
+		ret = tioclinux(tty, arg);
+		break;
 	case KIOCSOUND:
 		if (!perm)
 			goto eperm;
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index cf56a2af5fe..2964f5f4a7e 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -184,6 +184,9 @@ static void sh_cmt_disable(struct sh_cmt_priv *p)
 	/* disable channel */
 	sh_cmt_start_stop_ch(p, 0);
 
+	/* disable interrupts in CMT block */
+	sh_cmt_write(p, CMCSR, 0);
+
 	/* stop clock */
 	clk_disable(p->clk);
 }
@@ -599,7 +602,6 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev)
 	p->irqaction.handler = sh_cmt_interrupt;
 	p->irqaction.dev_id = p;
 	p->irqaction.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL;
-	p->irqaction.mask = CPU_MASK_NONE;
 	ret = setup_irq(irq, &p->irqaction);
 	if (ret) {
 		pr_err("sh_cmt: failed to request irq %d\n", irq);
diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c
index d1ae75454d1..973e714d605 100644
--- a/drivers/clocksource/sh_mtu2.c
+++ b/drivers/clocksource/sh_mtu2.c
@@ -283,7 +283,6 @@ static int sh_mtu2_setup(struct sh_mtu2_priv *p, struct platform_device *pdev)
 	p->irqaction.dev_id = p;
 	p->irqaction.irq = irq;
 	p->irqaction.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL;
-	p->irqaction.mask = CPU_MASK_NONE;
 
 	/* get hold of clock */
 	p->clk = clk_get(&p->pdev->dev, cfg->clk);
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index d6ea4398bf6..9ffb05f4095 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -138,6 +138,9 @@ static void sh_tmu_disable(struct sh_tmu_priv *p)
 	/* disable channel */
 	sh_tmu_start_stop_ch(p, 0);
 
+	/* disable interrupts in TMU block */
+	sh_tmu_write(p, TCR, 0x0000);
+
 	/* stop clock */
 	clk_disable(p->clk);
 }
@@ -385,7 +388,6 @@ static int sh_tmu_setup(struct sh_tmu_priv *p, struct platform_device *pdev)
 	p->irqaction.dev_id = p;
 	p->irqaction.irq = irq;
 	p->irqaction.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL;
-	p->irqaction.mask = CPU_MASK_NONE;
 
 	/* get hold of clock */
 	p->clk = clk_get(&p->pdev->dev, cfg->clk);
diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c
index 87f92c39b5f..a9952b1236b 100644
--- a/drivers/crypto/padlock-aes.c
+++ b/drivers/crypto/padlock-aes.c
@@ -18,9 +18,22 @@
 #include <linux/percpu.h>
 #include <linux/smp.h>
 #include <asm/byteorder.h>
+#include <asm/processor.h>
 #include <asm/i387.h>
 #include "padlock.h"
 
+/*
+ * Number of data blocks actually fetched for each xcrypt insn.
+ * Processors with prefetch errata will fetch extra blocks.
+ */
+static unsigned int ecb_fetch_blocks = 2;
+#define MAX_ECB_FETCH_BLOCKS (8)
+#define ecb_fetch_bytes (ecb_fetch_blocks * AES_BLOCK_SIZE)
+
+static unsigned int cbc_fetch_blocks = 1;
+#define MAX_CBC_FETCH_BLOCKS (4)
+#define cbc_fetch_bytes (cbc_fetch_blocks * AES_BLOCK_SIZE)
+
 /* Control word. */
 struct cword {
 	unsigned int __attribute__ ((__packed__))
@@ -172,73 +185,111 @@ static inline void padlock_store_cword(struct cword *cword)
  * should be used only inside the irq_ts_save/restore() context
  */
 
-static inline void padlock_xcrypt(const u8 *input, u8 *output, void *key,
-				  struct cword *control_word)
+static inline void rep_xcrypt_ecb(const u8 *input, u8 *output, void *key,
+				  struct cword *control_word, int count)
 {
 	asm volatile (".byte 0xf3,0x0f,0xa7,0xc8"	/* rep xcryptecb */
 		      : "+S"(input), "+D"(output)
-		      : "d"(control_word), "b"(key), "c"(1));
+		      : "d"(control_word), "b"(key), "c"(count));
+}
+
+static inline u8 *rep_xcrypt_cbc(const u8 *input, u8 *output, void *key,
+				 u8 *iv, struct cword *control_word, int count)
+{
+	asm volatile (".byte 0xf3,0x0f,0xa7,0xd0"	/* rep xcryptcbc */
+		      : "+S" (input), "+D" (output), "+a" (iv)
+		      : "d" (control_word), "b" (key), "c" (count));
+	return iv;
 }
 
-static void aes_crypt_copy(const u8 *in, u8 *out, u32 *key, struct cword *cword)
+static void ecb_crypt_copy(const u8 *in, u8 *out, u32 *key,
+			   struct cword *cword, int count)
 {
-	u8 buf[AES_BLOCK_SIZE * 2 + PADLOCK_ALIGNMENT - 1];
+	/*
+	 * Padlock prefetches extra data so we must provide mapped input buffers.
+	 * Assume there are at least 16 bytes of stack already in use.
+	 */
+	u8 buf[AES_BLOCK_SIZE * (MAX_ECB_FETCH_BLOCKS - 1) + PADLOCK_ALIGNMENT - 1];
+	u8 *tmp = PTR_ALIGN(&buf[0], PADLOCK_ALIGNMENT);
+
+	memcpy(tmp, in, count * AES_BLOCK_SIZE);
+	rep_xcrypt_ecb(tmp, out, key, cword, count);
+}
+
+static u8 *cbc_crypt_copy(const u8 *in, u8 *out, u32 *key,
+			   u8 *iv, struct cword *cword, int count)
+{
+	/*
+	 * Padlock prefetches extra data so we must provide mapped input buffers.
+	 * Assume there are at least 16 bytes of stack already in use.
+	 */
+	u8 buf[AES_BLOCK_SIZE * (MAX_CBC_FETCH_BLOCKS - 1) + PADLOCK_ALIGNMENT - 1];
 	u8 *tmp = PTR_ALIGN(&buf[0], PADLOCK_ALIGNMENT);
 
-	memcpy(tmp, in, AES_BLOCK_SIZE);
-	padlock_xcrypt(tmp, out, key, cword);
+	memcpy(tmp, in, count * AES_BLOCK_SIZE);
+	return rep_xcrypt_cbc(tmp, out, key, iv, cword, count);
 }
 
-static inline void aes_crypt(const u8 *in, u8 *out, u32 *key,
-			     struct cword *cword)
+static inline void ecb_crypt(const u8 *in, u8 *out, u32 *key,
+			     struct cword *cword, int count)
 {
-	/* padlock_xcrypt requires at least two blocks of data. */
-	if (unlikely(!(((unsigned long)in ^ (PAGE_SIZE - AES_BLOCK_SIZE)) &
-		       (PAGE_SIZE - 1)))) {
-		aes_crypt_copy(in, out, key, cword);
+	/* Padlock in ECB mode fetches at least ecb_fetch_bytes of data.
+	 * We could avoid some copying here but it's probably not worth it.
+	 */
+	if (unlikely(((unsigned long)in & PAGE_SIZE) + ecb_fetch_bytes > PAGE_SIZE)) {
+		ecb_crypt_copy(in, out, key, cword, count);
 		return;
 	}
 
-	padlock_xcrypt(in, out, key, cword);
+	rep_xcrypt_ecb(in, out, key, cword, count);
+}
+
+static inline u8 *cbc_crypt(const u8 *in, u8 *out, u32 *key,
+			    u8 *iv, struct cword *cword, int count)
+{
+	/* Padlock in CBC mode fetches at least cbc_fetch_bytes of data. */
+	if (unlikely(((unsigned long)in & PAGE_SIZE) + cbc_fetch_bytes > PAGE_SIZE))
+		return cbc_crypt_copy(in, out, key, iv, cword, count);
+
+	return rep_xcrypt_cbc(in, out, key, iv, cword, count);
 }
 
 static inline void padlock_xcrypt_ecb(const u8 *input, u8 *output, void *key,
 				      void *control_word, u32 count)
 {
-	if (count == 1) {
-		aes_crypt(input, output, key, control_word);
+	u32 initial = count & (ecb_fetch_blocks - 1);
+
+	if (count < ecb_fetch_blocks) {
+		ecb_crypt(input, output, key, control_word, count);
 		return;
 	}
 
-	asm volatile ("test $1, %%cl;"
-		      "je 1f;"
-#ifndef CONFIG_X86_64
-		      "lea -1(%%ecx), %%eax;"
-		      "mov $1, %%ecx;"
-#else
-		      "lea -1(%%rcx), %%rax;"
-		      "mov $1, %%rcx;"
-#endif
-		      ".byte 0xf3,0x0f,0xa7,0xc8;"	/* rep xcryptecb */
-#ifndef CONFIG_X86_64
-		      "mov %%eax, %%ecx;"
-#else
-		      "mov %%rax, %%rcx;"
-#endif
-		      "1:"
-		      ".byte 0xf3,0x0f,0xa7,0xc8"	/* rep xcryptecb */
+	if (initial)
+		asm volatile (".byte 0xf3,0x0f,0xa7,0xc8"	/* rep xcryptecb */
+			      : "+S"(input), "+D"(output)
+			      : "d"(control_word), "b"(key), "c"(initial));
+
+	asm volatile (".byte 0xf3,0x0f,0xa7,0xc8"	/* rep xcryptecb */
 		      : "+S"(input), "+D"(output)
-		      : "d"(control_word), "b"(key), "c"(count)
-		      : "ax");
+		      : "d"(control_word), "b"(key), "c"(count - initial));
 }
 
 static inline u8 *padlock_xcrypt_cbc(const u8 *input, u8 *output, void *key,
 				     u8 *iv, void *control_word, u32 count)
 {
-	/* rep xcryptcbc */
-	asm volatile (".byte 0xf3,0x0f,0xa7,0xd0"
+	u32 initial = count & (cbc_fetch_blocks - 1);
+
+	if (count < cbc_fetch_blocks)
+		return cbc_crypt(input, output, key, iv, control_word, count);
+
+	if (initial)
+		asm volatile (".byte 0xf3,0x0f,0xa7,0xd0"	/* rep xcryptcbc */
+			      : "+S" (input), "+D" (output), "+a" (iv)
+			      : "d" (control_word), "b" (key), "c" (count));
+
+	asm volatile (".byte 0xf3,0x0f,0xa7,0xd0"	/* rep xcryptcbc */
 		      : "+S" (input), "+D" (output), "+a" (iv)
-		      : "d" (control_word), "b" (key), "c" (count));
+		      : "d" (control_word), "b" (key), "c" (count-initial));
 	return iv;
 }
 
@@ -249,7 +300,7 @@ static void aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
 
 	padlock_reset_key(&ctx->cword.encrypt);
 	ts_state = irq_ts_save();
-	aes_crypt(in, out, ctx->E, &ctx->cword.encrypt);
+	ecb_crypt(in, out, ctx->E, &ctx->cword.encrypt, 1);
 	irq_ts_restore(ts_state);
 	padlock_store_cword(&ctx->cword.encrypt);
 }
@@ -261,7 +312,7 @@ static void aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
 
 	padlock_reset_key(&ctx->cword.encrypt);
 	ts_state = irq_ts_save();
-	aes_crypt(in, out, ctx->D, &ctx->cword.decrypt);
+	ecb_crypt(in, out, ctx->D, &ctx->cword.decrypt, 1);
 	irq_ts_restore(ts_state);
 	padlock_store_cword(&ctx->cword.encrypt);
 }
@@ -454,6 +505,7 @@ static struct crypto_alg cbc_aes_alg = {
 static int __init padlock_init(void)
 {
 	int ret;
+	struct cpuinfo_x86 *c = &cpu_data(0);
 
 	if (!cpu_has_xcrypt) {
 		printk(KERN_NOTICE PFX "VIA PadLock not detected.\n");
@@ -476,6 +528,12 @@ static int __init padlock_init(void)
 
 	printk(KERN_NOTICE PFX "Using VIA PadLock ACE for AES algorithm.\n");
 
+	if (c->x86 == 6 && c->x86_model == 15 && c->x86_mask == 2) {
+		ecb_fetch_blocks = MAX_ECB_FETCH_BLOCKS;
+		cbc_fetch_blocks = MAX_CBC_FETCH_BLOCKS;
+		printk(KERN_NOTICE PFX "VIA Nano stepping 2 detected: enabling workaround.\n");
+	}
+
 out:
 	return ret;
 
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index ab4f3592a11..4339b1a879c 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -5,7 +5,7 @@
 #
 
 menuconfig EDAC
-	bool "EDAC - error detection and reporting"
+	bool "EDAC (Error Detection And Correction) reporting"
 	depends on HAS_IOMEM
 	depends on X86 || PPC
 	help
@@ -232,4 +232,13 @@ config EDAC_AMD8111
 	  Note, add more Kconfig dependency if it's adopted
 	  on some machine other than Maple.
 
+config EDAC_CPC925
+	tristate "IBM CPC925 Memory Controller (PPC970FX)"
+	depends on EDAC_MM_EDAC && PPC64
+	help
+	  Support for error detection and correction on the
+	  IBM CPC925 Bridge and Memory Controller, which is
+	  a companion chip to the PowerPC 970 family of
+	  processors.
+
 endif # EDAC
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 633dc5604ee..98aa4a7db41 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -18,6 +18,7 @@ edac_core-objs	+= edac_pci.o edac_pci_sysfs.o
 endif
 
 obj-$(CONFIG_EDAC_AMD76X)		+= amd76x_edac.o
+obj-$(CONFIG_EDAC_CPC925)		+= cpc925_edac.o
 obj-$(CONFIG_EDAC_I5000)		+= i5000_edac.o
 obj-$(CONFIG_EDAC_I5100)		+= i5100_edac.o
 obj-$(CONFIG_EDAC_I5400)		+= i5400_edac.o
diff --git a/drivers/edac/amd8111_edac.c b/drivers/edac/amd8111_edac.c
index 2cb58ef743e..35b78d04bbf 100644
--- a/drivers/edac/amd8111_edac.c
+++ b/drivers/edac/amd8111_edac.c
@@ -37,7 +37,6 @@
 #define AMD8111_EDAC_MOD_STR	"amd8111_edac"
 
 #define PCI_DEVICE_ID_AMD_8111_PCI	0x7460
-static int edac_dev_idx;
 
 enum amd8111_edac_devs {
 	LPC_BRIDGE = 0,
@@ -377,7 +376,7 @@ static int amd8111_dev_probe(struct pci_dev *dev,
 	 * edac_device_ctl_info, but make use of existing
 	 * one instead.
 	*/
-	dev_info->edac_idx = edac_dev_idx++;
+	dev_info->edac_idx = edac_device_alloc_index();
 	dev_info->edac_dev =
 		edac_device_alloc_ctl_info(0, dev_info->ctl_name, 1,
 					   NULL, 0, 0,
diff --git a/drivers/edac/cell_edac.c b/drivers/edac/cell_edac.c
index cb0f639f049..c973004c002 100644
--- a/drivers/edac/cell_edac.c
+++ b/drivers/edac/cell_edac.c
@@ -227,7 +227,7 @@ static struct platform_driver cell_edac_driver = {
 		.owner	= THIS_MODULE,
 	},
 	.probe		= cell_edac_probe,
-	.remove		= cell_edac_remove,
+	.remove		= __devexit_p(cell_edac_remove),
 };
 
 static int __init cell_edac_init(void)
diff --git a/drivers/edac/cpc925_edac.c b/drivers/edac/cpc925_edac.c
new file mode 100644
index 00000000000..8c54196b5ab
--- /dev/null
+++ b/drivers/edac/cpc925_edac.c
@@ -0,0 +1,1017 @@
+/*
+ * cpc925_edac.c, EDAC driver for IBM CPC925 Bridge and Memory Controller.
+ *
+ * Copyright (c) 2008 Wind River Systems, Inc.
+ *
+ * Authors:	Cao Qingtao <qingtao.cao@windriver.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/edac.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "edac_core.h"
+#include "edac_module.h"
+
+#define CPC925_EDAC_REVISION	" Ver: 1.0.0 " __DATE__
+#define CPC925_EDAC_MOD_STR	"cpc925_edac"
+
+#define cpc925_printk(level, fmt, arg...) \
+	edac_printk(level, "CPC925", fmt, ##arg)
+
+#define cpc925_mc_printk(mci, level, fmt, arg...) \
+	edac_mc_chipset_printk(mci, level, "CPC925", fmt, ##arg)
+
+/*
+ * CPC925 registers are of 32 bits with bit0 defined at the
+ * most significant bit and bit31 at that of least significant.
+ */
+#define CPC925_BITS_PER_REG	32
+#define CPC925_BIT(nr)		(1UL << (CPC925_BITS_PER_REG - 1 - nr))
+
+/*
+ * EDAC device names for the error detections of
+ * CPU Interface and Hypertransport Link.
+ */
+#define CPC925_CPU_ERR_DEV	"cpu"
+#define CPC925_HT_LINK_DEV	"htlink"
+
+/* Suppose DDR Refresh cycle is 15.6 microsecond */
+#define CPC925_REF_FREQ		0xFA69
+#define CPC925_SCRUB_BLOCK_SIZE 64	/* bytes */
+#define CPC925_NR_CSROWS	8
+
+/*
+ * All registers and bits definitions are taken from
+ * "CPC925 Bridge and Memory Controller User Manual, SA14-2761-02".
+ */
+
+/*
+ * CPU and Memory Controller Registers
+ */
+/************************************************************
+ *	Processor Interface Exception Mask Register (APIMASK)
+ ************************************************************/
+#define REG_APIMASK_OFFSET	0x30070
+enum apimask_bits {
+	APIMASK_DART	= CPC925_BIT(0), /* DART Exception */
+	APIMASK_ADI0	= CPC925_BIT(1), /* Handshake Error on PI0_ADI */
+	APIMASK_ADI1	= CPC925_BIT(2), /* Handshake Error on PI1_ADI */
+	APIMASK_STAT	= CPC925_BIT(3), /* Status Exception */
+	APIMASK_DERR	= CPC925_BIT(4), /* Data Error Exception */
+	APIMASK_ADRS0	= CPC925_BIT(5), /* Addressing Exception on PI0 */
+	APIMASK_ADRS1	= CPC925_BIT(6), /* Addressing Exception on PI1 */
+					 /* BIT(7) Reserved */
+	APIMASK_ECC_UE_H = CPC925_BIT(8), /* UECC upper */
+	APIMASK_ECC_CE_H = CPC925_BIT(9), /* CECC upper */
+	APIMASK_ECC_UE_L = CPC925_BIT(10), /* UECC lower */
+	APIMASK_ECC_CE_L = CPC925_BIT(11), /* CECC lower */
+
+	CPU_MASK_ENABLE = (APIMASK_DART | APIMASK_ADI0 | APIMASK_ADI1 |
+			   APIMASK_STAT | APIMASK_DERR | APIMASK_ADRS0 |
+			   APIMASK_ADRS1),
+	ECC_MASK_ENABLE = (APIMASK_ECC_UE_H | APIMASK_ECC_CE_H |
+			   APIMASK_ECC_UE_L | APIMASK_ECC_CE_L),
+};
+
+/************************************************************
+ *	Processor Interface Exception Register (APIEXCP)
+ ************************************************************/
+#define REG_APIEXCP_OFFSET	0x30060
+enum apiexcp_bits {
+	APIEXCP_DART	= CPC925_BIT(0), /* DART Exception */
+	APIEXCP_ADI0	= CPC925_BIT(1), /* Handshake Error on PI0_ADI */
+	APIEXCP_ADI1	= CPC925_BIT(2), /* Handshake Error on PI1_ADI */
+	APIEXCP_STAT	= CPC925_BIT(3), /* Status Exception */
+	APIEXCP_DERR	= CPC925_BIT(4), /* Data Error Exception */
+	APIEXCP_ADRS0	= CPC925_BIT(5), /* Addressing Exception on PI0 */
+	APIEXCP_ADRS1	= CPC925_BIT(6), /* Addressing Exception on PI1 */
+					 /* BIT(7) Reserved */
+	APIEXCP_ECC_UE_H = CPC925_BIT(8), /* UECC upper */
+	APIEXCP_ECC_CE_H = CPC925_BIT(9), /* CECC upper */
+	APIEXCP_ECC_UE_L = CPC925_BIT(10), /* UECC lower */
+	APIEXCP_ECC_CE_L = CPC925_BIT(11), /* CECC lower */
+
+	CPU_EXCP_DETECTED = (APIEXCP_DART | APIEXCP_ADI0 | APIEXCP_ADI1 |
+			     APIEXCP_STAT | APIEXCP_DERR | APIEXCP_ADRS0 |
+			     APIEXCP_ADRS1),
+	UECC_EXCP_DETECTED = (APIEXCP_ECC_UE_H | APIEXCP_ECC_UE_L),
+	CECC_EXCP_DETECTED = (APIEXCP_ECC_CE_H | APIEXCP_ECC_CE_L),
+	ECC_EXCP_DETECTED = (UECC_EXCP_DETECTED | CECC_EXCP_DETECTED),
+};
+
+/************************************************************
+ *	Memory Bus Configuration Register (MBCR)
+************************************************************/
+#define REG_MBCR_OFFSET		0x2190
+#define MBCR_64BITCFG_SHIFT	23
+#define MBCR_64BITCFG_MASK	(1UL << MBCR_64BITCFG_SHIFT)
+#define MBCR_64BITBUS_SHIFT	22
+#define MBCR_64BITBUS_MASK	(1UL << MBCR_64BITBUS_SHIFT)
+
+/************************************************************
+ *	Memory Bank Mode Register (MBMR)
+************************************************************/
+#define REG_MBMR_OFFSET		0x21C0
+#define MBMR_MODE_MAX_VALUE	0xF
+#define MBMR_MODE_SHIFT		25
+#define MBMR_MODE_MASK		(MBMR_MODE_MAX_VALUE << MBMR_MODE_SHIFT)
+#define MBMR_BBA_SHIFT		24
+#define MBMR_BBA_MASK		(1UL << MBMR_BBA_SHIFT)
+
+/************************************************************
+ *	Memory Bank Boundary Address Register (MBBAR)
+ ************************************************************/
+#define REG_MBBAR_OFFSET	0x21D0
+#define MBBAR_BBA_MAX_VALUE	0xFF
+#define MBBAR_BBA_SHIFT		24
+#define MBBAR_BBA_MASK		(MBBAR_BBA_MAX_VALUE << MBBAR_BBA_SHIFT)
+
+/************************************************************
+ *	Memory Scrub Control Register (MSCR)
+ ************************************************************/
+#define REG_MSCR_OFFSET		0x2400
+#define MSCR_SCRUB_MOD_MASK	0xC0000000 /* scrub_mod - bit0:1*/
+#define MSCR_BACKGR_SCRUB	0x40000000 /* 01 */
+#define MSCR_SI_SHIFT		16 	/* si - bit8:15*/
+#define MSCR_SI_MAX_VALUE	0xFF
+#define MSCR_SI_MASK		(MSCR_SI_MAX_VALUE << MSCR_SI_SHIFT)
+
+/************************************************************
+ *	Memory Scrub Range Start Register (MSRSR)
+ ************************************************************/
+#define REG_MSRSR_OFFSET	0x2410
+
+/************************************************************
+ *	Memory Scrub Range End Register (MSRER)
+ ************************************************************/
+#define REG_MSRER_OFFSET	0x2420
+
+/************************************************************
+ *	Memory Scrub Pattern Register (MSPR)
+ ************************************************************/
+#define REG_MSPR_OFFSET		0x2430
+
+/************************************************************
+ *	Memory Check Control Register (MCCR)
+ ************************************************************/
+#define REG_MCCR_OFFSET		0x2440
+enum mccr_bits {
+	MCCR_ECC_EN	= CPC925_BIT(0), /* ECC high and low check */
+};
+
+/************************************************************
+ *	Memory Check Range End Register (MCRER)
+ ************************************************************/
+#define REG_MCRER_OFFSET	0x2450
+
+/************************************************************
+ *	Memory Error Address Register (MEAR)
+ ************************************************************/
+#define REG_MEAR_OFFSET		0x2460
+#define MEAR_BCNT_MAX_VALUE	0x3
+#define MEAR_BCNT_SHIFT		30
+#define MEAR_BCNT_MASK		(MEAR_BCNT_MAX_VALUE << MEAR_BCNT_SHIFT)
+#define MEAR_RANK_MAX_VALUE	0x7
+#define MEAR_RANK_SHIFT		27
+#define MEAR_RANK_MASK		(MEAR_RANK_MAX_VALUE << MEAR_RANK_SHIFT)
+#define MEAR_COL_MAX_VALUE	0x7FF
+#define MEAR_COL_SHIFT		16
+#define MEAR_COL_MASK		(MEAR_COL_MAX_VALUE << MEAR_COL_SHIFT)
+#define MEAR_BANK_MAX_VALUE	0x3
+#define MEAR_BANK_SHIFT		14
+#define MEAR_BANK_MASK		(MEAR_BANK_MAX_VALUE << MEAR_BANK_SHIFT)
+#define MEAR_ROW_MASK		0x00003FFF
+
+/************************************************************
+ *	Memory Error Syndrome Register (MESR)
+ ************************************************************/
+#define REG_MESR_OFFSET		0x2470
+#define MESR_ECC_SYN_H_MASK	0xFF00
+#define MESR_ECC_SYN_L_MASK	0x00FF
+
+/************************************************************
+ *	Memory Mode Control Register (MMCR)
+ ************************************************************/
+#define REG_MMCR_OFFSET		0x2500
+enum mmcr_bits {
+	MMCR_REG_DIMM_MODE = CPC925_BIT(3),
+};
+
+/*
+ * HyperTransport Link Registers
+ */
+/************************************************************
+ *  Error Handling/Enumeration Scratch Pad Register (ERRCTRL)
+ ************************************************************/
+#define REG_ERRCTRL_OFFSET	0x70140
+enum errctrl_bits {			 /* nonfatal interrupts for */
+	ERRCTRL_SERR_NF	= CPC925_BIT(0), /* system error */
+	ERRCTRL_CRC_NF	= CPC925_BIT(1), /* CRC error */
+	ERRCTRL_RSP_NF	= CPC925_BIT(2), /* Response error */
+	ERRCTRL_EOC_NF	= CPC925_BIT(3), /* End-Of-Chain error */
+	ERRCTRL_OVF_NF	= CPC925_BIT(4), /* Overflow error */
+	ERRCTRL_PROT_NF	= CPC925_BIT(5), /* Protocol error */
+
+	ERRCTRL_RSP_ERR	= CPC925_BIT(6), /* Response error received */
+	ERRCTRL_CHN_FAL = CPC925_BIT(7), /* Sync flooding detected */
+
+	HT_ERRCTRL_ENABLE = (ERRCTRL_SERR_NF | ERRCTRL_CRC_NF |
+			     ERRCTRL_RSP_NF | ERRCTRL_EOC_NF |
+			     ERRCTRL_OVF_NF | ERRCTRL_PROT_NF),
+	HT_ERRCTRL_DETECTED = (ERRCTRL_RSP_ERR | ERRCTRL_CHN_FAL),
+};
+
+/************************************************************
+ *  Link Configuration and Link Control Register (LINKCTRL)
+ ************************************************************/
+#define REG_LINKCTRL_OFFSET	0x70110
+enum linkctrl_bits {
+	LINKCTRL_CRC_ERR	= (CPC925_BIT(22) | CPC925_BIT(23)),
+	LINKCTRL_LINK_FAIL	= CPC925_BIT(27),
+
+	HT_LINKCTRL_DETECTED	= (LINKCTRL_CRC_ERR | LINKCTRL_LINK_FAIL),
+};
+
+/************************************************************
+ *  Link FreqCap/Error/Freq/Revision ID Register (LINKERR)
+ ************************************************************/
+#define REG_LINKERR_OFFSET	0x70120
+enum linkerr_bits {
+	LINKERR_EOC_ERR		= CPC925_BIT(17), /* End-Of-Chain error */
+	LINKERR_OVF_ERR		= CPC925_BIT(18), /* Receive Buffer Overflow */
+	LINKERR_PROT_ERR	= CPC925_BIT(19), /* Protocol error */
+
+	HT_LINKERR_DETECTED	= (LINKERR_EOC_ERR | LINKERR_OVF_ERR |
+				   LINKERR_PROT_ERR),
+};
+
+/************************************************************
+ *	Bridge Control Register (BRGCTRL)
+ ************************************************************/
+#define REG_BRGCTRL_OFFSET	0x70300
+enum brgctrl_bits {
+	BRGCTRL_DETSERR = CPC925_BIT(0), /* SERR on Secondary Bus */
+	BRGCTRL_SECBUSRESET = CPC925_BIT(9), /* Secondary Bus Reset */
+};
+
+/* Private structure for edac memory controller */
+struct cpc925_mc_pdata {
+	void __iomem *vbase;
+	unsigned long total_mem;
+	const char *name;
+	int edac_idx;
+};
+
+/* Private structure for common edac device */
+struct cpc925_dev_info {
+	void __iomem *vbase;
+	struct platform_device *pdev;
+	char *ctl_name;
+	int edac_idx;
+	struct edac_device_ctl_info *edac_dev;
+	void (*init)(struct cpc925_dev_info *dev_info);
+	void (*exit)(struct cpc925_dev_info *dev_info);
+	void (*check)(struct edac_device_ctl_info *edac_dev);
+};
+
+/* Get total memory size from Open Firmware DTB */
+static void get_total_mem(struct cpc925_mc_pdata *pdata)
+{
+	struct device_node *np = NULL;
+	const unsigned int *reg, *reg_end;
+	int len, sw, aw;
+	unsigned long start, size;
+
+	np = of_find_node_by_type(NULL, "memory");
+	if (!np)
+		return;
+
+	aw = of_n_addr_cells(np);
+	sw = of_n_size_cells(np);
+	reg = (const unsigned int *)of_get_property(np, "reg", &len);
+	reg_end = reg + len/4;
+
+	pdata->total_mem = 0;
+	do {
+		start = of_read_number(reg, aw);
+		reg += aw;
+		size = of_read_number(reg, sw);
+		reg += sw;
+		debugf1("%s: start 0x%lx, size 0x%lx\n", __func__,
+			start, size);
+		pdata->total_mem += size;
+	} while (reg < reg_end);
+
+	of_node_put(np);
+	debugf0("%s: total_mem 0x%lx\n", __func__, pdata->total_mem);
+}
+
+static void cpc925_init_csrows(struct mem_ctl_info *mci)
+{
+	struct cpc925_mc_pdata *pdata = mci->pvt_info;
+	struct csrow_info *csrow;
+	int index;
+	u32 mbmr, mbbar, bba;
+	unsigned long row_size, last_nr_pages = 0;
+
+	get_total_mem(pdata);
+
+	for (index = 0; index < mci->nr_csrows; index++) {
+		mbmr = __raw_readl(pdata->vbase + REG_MBMR_OFFSET +
+				   0x20 * index);
+		mbbar = __raw_readl(pdata->vbase + REG_MBBAR_OFFSET +
+				   0x20 + index);
+		bba = (((mbmr & MBMR_BBA_MASK) >> MBMR_BBA_SHIFT) << 8) |
+		       ((mbbar & MBBAR_BBA_MASK) >> MBBAR_BBA_SHIFT);
+
+		if (bba == 0)
+			continue; /* not populated */
+
+		csrow = &mci->csrows[index];
+
+		row_size = bba * (1UL << 28);	/* 256M */
+		csrow->first_page = last_nr_pages;
+		csrow->nr_pages = row_size >> PAGE_SHIFT;
+		csrow->last_page = csrow->first_page + csrow->nr_pages - 1;
+		last_nr_pages = csrow->last_page + 1;
+
+		csrow->mtype = MEM_RDDR;
+		csrow->edac_mode = EDAC_SECDED;
+
+		switch (csrow->nr_channels) {
+		case 1: /* Single channel */
+			csrow->grain = 32; /* four-beat burst of 32 bytes */
+			break;
+		case 2: /* Dual channel */
+		default:
+			csrow->grain = 64; /* four-beat burst of 64 bytes */
+			break;
+		}
+
+		switch ((mbmr & MBMR_MODE_MASK) >> MBMR_MODE_SHIFT) {
+		case 6: /* 0110, no way to differentiate X8 VS X16 */
+		case 5:	/* 0101 */
+		case 8: /* 1000 */
+			csrow->dtype = DEV_X16;
+			break;
+		case 7: /* 0111 */
+		case 9: /* 1001 */
+			csrow->dtype = DEV_X8;
+			break;
+		default:
+			csrow->dtype = DEV_UNKNOWN;
+			break;
+		}
+	}
+}
+
+/* Enable memory controller ECC detection */
+static void cpc925_mc_init(struct mem_ctl_info *mci)
+{
+	struct cpc925_mc_pdata *pdata = mci->pvt_info;
+	u32 apimask;
+	u32 mccr;
+
+	/* Enable various ECC error exceptions */
+	apimask = __raw_readl(pdata->vbase + REG_APIMASK_OFFSET);
+	if ((apimask & ECC_MASK_ENABLE) == 0) {
+		apimask |= ECC_MASK_ENABLE;
+		__raw_writel(apimask, pdata->vbase + REG_APIMASK_OFFSET);
+	}
+
+	/* Enable ECC detection */
+	mccr = __raw_readl(pdata->vbase + REG_MCCR_OFFSET);
+	if ((mccr & MCCR_ECC_EN) == 0) {
+		mccr |= MCCR_ECC_EN;
+		__raw_writel(mccr, pdata->vbase + REG_MCCR_OFFSET);
+	}
+}
+
+/* Disable memory controller ECC detection */
+static void cpc925_mc_exit(struct mem_ctl_info *mci)
+{
+	/*
+	 * WARNING:
+	 * We are supposed to clear the ECC error detection bits,
+	 * and it will be no problem to do so. However, once they
+	 * are cleared here if we want to re-install CPC925 EDAC
+	 * module later, setting them up in cpc925_mc_init() will
+	 * trigger machine check exception.
+	 * Also, it's ok to leave ECC error detection bits enabled,
+	 * since they are reset to 1 by default or by boot loader.
+	 */
+
+	return;
+}
+
+/*
+ * Revert DDR column/row/bank addresses into page frame number and
+ * offset in page.
+ *
+ * Suppose memory mode is 0x0111(128-bit mode, identical DIMM pairs),
+ * physical address(PA) bits to column address(CA) bits mappings are:
+ * CA	0   1   2   3   4   5   6   7   8   9   10
+ * PA	59  58  57  56  55  54  53  52  51  50  49
+ *
+ * physical address(PA) bits to bank address(BA) bits mappings are:
+ * BA	0   1
+ * PA	43  44
+ *
+ * physical address(PA) bits to row address(RA) bits mappings are:
+ * RA	0   1   2   3   4   5   6   7   8   9   10   11   12
+ * PA	36  35  34  48  47  46  45  40  41  42  39   38   37
+ */
+static void cpc925_mc_get_pfn(struct mem_ctl_info *mci, u32 mear,
+		unsigned long *pfn, unsigned long *offset, int *csrow)
+{
+	u32 bcnt, rank, col, bank, row;
+	u32 c;
+	unsigned long pa;
+	int i;
+
+	bcnt = (mear & MEAR_BCNT_MASK) >> MEAR_BCNT_SHIFT;
+	rank = (mear & MEAR_RANK_MASK) >> MEAR_RANK_SHIFT;
+	col = (mear & MEAR_COL_MASK) >> MEAR_COL_SHIFT;
+	bank = (mear & MEAR_BANK_MASK) >> MEAR_BANK_SHIFT;
+	row = mear & MEAR_ROW_MASK;
+
+	*csrow = rank;
+
+#ifdef CONFIG_EDAC_DEBUG
+	if (mci->csrows[rank].first_page == 0) {
+		cpc925_mc_printk(mci, KERN_ERR, "ECC occurs in a "
+			"non-populated csrow, broken hardware?\n");
+		return;
+	}
+#endif
+
+	/* Revert csrow number */
+	pa = mci->csrows[rank].first_page << PAGE_SHIFT;
+
+	/* Revert column address */
+	col += bcnt;
+	for (i = 0; i < 11; i++) {
+		c = col & 0x1;
+		col >>= 1;
+		pa |= c << (14 - i);
+	}
+
+	/* Revert bank address */
+	pa |= bank << 19;
+
+	/* Revert row address, in 4 steps */
+	for (i = 0; i < 3; i++) {
+		c = row & 0x1;
+		row >>= 1;
+		pa |= c << (26 - i);
+	}
+
+	for (i = 0; i < 3; i++) {
+		c = row & 0x1;
+		row >>= 1;
+		pa |= c << (21 + i);
+	}
+
+	for (i = 0; i < 4; i++) {
+		c = row & 0x1;
+		row >>= 1;
+		pa |= c << (18 - i);
+	}
+
+	for (i = 0; i < 3; i++) {
+		c = row & 0x1;
+		row >>= 1;
+		pa |= c << (29 - i);
+	}
+
+	*offset = pa & (PAGE_SIZE - 1);
+	*pfn = pa >> PAGE_SHIFT;
+
+	debugf0("%s: ECC physical address 0x%lx\n", __func__, pa);
+}
+
+static int cpc925_mc_find_channel(struct mem_ctl_info *mci, u16 syndrome)
+{
+	if ((syndrome & MESR_ECC_SYN_H_MASK) == 0)
+		return 0;
+
+	if ((syndrome & MESR_ECC_SYN_L_MASK) == 0)
+		return 1;
+
+	cpc925_mc_printk(mci, KERN_INFO, "Unexpected syndrome value: 0x%x\n",
+			 syndrome);
+	return 1;
+}
+
+/* Check memory controller registers for ECC errors */
+static void cpc925_mc_check(struct mem_ctl_info *mci)
+{
+	struct cpc925_mc_pdata *pdata = mci->pvt_info;
+	u32 apiexcp;
+	u32 mear;
+	u32 mesr;
+	u16 syndrome;
+	unsigned long pfn = 0, offset = 0;
+	int csrow = 0, channel = 0;
+
+	/* APIEXCP is cleared when read */
+	apiexcp = __raw_readl(pdata->vbase + REG_APIEXCP_OFFSET);
+	if ((apiexcp & ECC_EXCP_DETECTED) == 0)
+		return;
+
+	mesr = __raw_readl(pdata->vbase + REG_MESR_OFFSET);
+	syndrome = mesr | (MESR_ECC_SYN_H_MASK | MESR_ECC_SYN_L_MASK);
+
+	mear = __raw_readl(pdata->vbase + REG_MEAR_OFFSET);
+
+	/* Revert column/row addresses into page frame number, etc */
+	cpc925_mc_get_pfn(mci, mear, &pfn, &offset, &csrow);
+
+	if (apiexcp & CECC_EXCP_DETECTED) {
+		cpc925_mc_printk(mci, KERN_INFO, "DRAM CECC Fault\n");
+		channel = cpc925_mc_find_channel(mci, syndrome);
+		edac_mc_handle_ce(mci, pfn, offset, syndrome,
+				  csrow, channel, mci->ctl_name);
+	}
+
+	if (apiexcp & UECC_EXCP_DETECTED) {
+		cpc925_mc_printk(mci, KERN_INFO, "DRAM UECC Fault\n");
+		edac_mc_handle_ue(mci, pfn, offset, csrow, mci->ctl_name);
+	}
+
+	cpc925_mc_printk(mci, KERN_INFO, "Dump registers:\n");
+	cpc925_mc_printk(mci, KERN_INFO, "APIMASK		0x%08x\n",
+		__raw_readl(pdata->vbase + REG_APIMASK_OFFSET));
+	cpc925_mc_printk(mci, KERN_INFO, "APIEXCP		0x%08x\n",
+		apiexcp);
+	cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Ctrl	0x%08x\n",
+		__raw_readl(pdata->vbase + REG_MSCR_OFFSET));
+	cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Rge Start	0x%08x\n",
+		__raw_readl(pdata->vbase + REG_MSRSR_OFFSET));
+	cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Rge End	0x%08x\n",
+		__raw_readl(pdata->vbase + REG_MSRER_OFFSET));
+	cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Pattern	0x%08x\n",
+		__raw_readl(pdata->vbase + REG_MSPR_OFFSET));
+	cpc925_mc_printk(mci, KERN_INFO, "Mem Chk Ctrl		0x%08x\n",
+		__raw_readl(pdata->vbase + REG_MCCR_OFFSET));
+	cpc925_mc_printk(mci, KERN_INFO, "Mem Chk Rge End	0x%08x\n",
+		__raw_readl(pdata->vbase + REG_MCRER_OFFSET));
+	cpc925_mc_printk(mci, KERN_INFO, "Mem Err Address	0x%08x\n",
+		mesr);
+	cpc925_mc_printk(mci, KERN_INFO, "Mem Err Syndrome	0x%08x\n",
+		syndrome);
+}
+
+/******************** CPU err device********************************/
+/* Enable CPU Errors detection */
+static void cpc925_cpu_init(struct cpc925_dev_info *dev_info)
+{
+	u32 apimask;
+
+	apimask = __raw_readl(dev_info->vbase + REG_APIMASK_OFFSET);
+	if ((apimask & CPU_MASK_ENABLE) == 0) {
+		apimask |= CPU_MASK_ENABLE;
+		__raw_writel(apimask, dev_info->vbase + REG_APIMASK_OFFSET);
+	}
+}
+
+/* Disable CPU Errors detection */
+static void cpc925_cpu_exit(struct cpc925_dev_info *dev_info)
+{
+	/*
+	 * WARNING:
+	 * We are supposed to clear the CPU error detection bits,
+	 * and it will be no problem to do so. However, once they
+	 * are cleared here if we want to re-install CPC925 EDAC
+	 * module later, setting them up in cpc925_cpu_init() will
+	 * trigger machine check exception.
+	 * Also, it's ok to leave CPU error detection bits enabled,
+	 * since they are reset to 1 by default.
+	 */
+
+	return;
+}
+
+/* Check for CPU Errors */
+static void cpc925_cpu_check(struct edac_device_ctl_info *edac_dev)
+{
+	struct cpc925_dev_info *dev_info = edac_dev->pvt_info;
+	u32 apiexcp;
+	u32 apimask;
+
+	/* APIEXCP is cleared when read */
+	apiexcp = __raw_readl(dev_info->vbase + REG_APIEXCP_OFFSET);
+	if ((apiexcp & CPU_EXCP_DETECTED) == 0)
+		return;
+
+	apimask = __raw_readl(dev_info->vbase + REG_APIMASK_OFFSET);
+	cpc925_printk(KERN_INFO, "Processor Interface Fault\n"
+				 "Processor Interface register dump:\n");
+	cpc925_printk(KERN_INFO, "APIMASK		0x%08x\n", apimask);
+	cpc925_printk(KERN_INFO, "APIEXCP		0x%08x\n", apiexcp);
+
+	edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name);
+}
+
+/******************** HT Link err device****************************/
+/* Enable HyperTransport Link Error detection */
+static void cpc925_htlink_init(struct cpc925_dev_info *dev_info)
+{
+	u32 ht_errctrl;
+
+	ht_errctrl = __raw_readl(dev_info->vbase + REG_ERRCTRL_OFFSET);
+	if ((ht_errctrl & HT_ERRCTRL_ENABLE) == 0) {
+		ht_errctrl |= HT_ERRCTRL_ENABLE;
+		__raw_writel(ht_errctrl, dev_info->vbase + REG_ERRCTRL_OFFSET);
+	}
+}
+
+/* Disable HyperTransport Link Error detection */
+static void cpc925_htlink_exit(struct cpc925_dev_info *dev_info)
+{
+	u32 ht_errctrl;
+
+	ht_errctrl = __raw_readl(dev_info->vbase + REG_ERRCTRL_OFFSET);
+	ht_errctrl &= ~HT_ERRCTRL_ENABLE;
+	__raw_writel(ht_errctrl, dev_info->vbase + REG_ERRCTRL_OFFSET);
+}
+
+/* Check for HyperTransport Link errors */
+static void cpc925_htlink_check(struct edac_device_ctl_info *edac_dev)
+{
+	struct cpc925_dev_info *dev_info = edac_dev->pvt_info;
+	u32 brgctrl = __raw_readl(dev_info->vbase + REG_BRGCTRL_OFFSET);
+	u32 linkctrl = __raw_readl(dev_info->vbase + REG_LINKCTRL_OFFSET);
+	u32 errctrl = __raw_readl(dev_info->vbase + REG_ERRCTRL_OFFSET);
+	u32 linkerr = __raw_readl(dev_info->vbase + REG_LINKERR_OFFSET);
+
+	if (!((brgctrl & BRGCTRL_DETSERR) ||
+	      (linkctrl & HT_LINKCTRL_DETECTED) ||
+	      (errctrl & HT_ERRCTRL_DETECTED) ||
+	      (linkerr & HT_LINKERR_DETECTED)))
+		return;
+
+	cpc925_printk(KERN_INFO, "HT Link Fault\n"
+				 "HT register dump:\n");
+	cpc925_printk(KERN_INFO, "Bridge Ctrl			0x%08x\n",
+		      brgctrl);
+	cpc925_printk(KERN_INFO, "Link Config Ctrl		0x%08x\n",
+		      linkctrl);
+	cpc925_printk(KERN_INFO, "Error Enum and Ctrl		0x%08x\n",
+		      errctrl);
+	cpc925_printk(KERN_INFO, "Link Error			0x%08x\n",
+		      linkerr);
+
+	/* Clear by write 1 */
+	if (brgctrl & BRGCTRL_DETSERR)
+		__raw_writel(BRGCTRL_DETSERR,
+				dev_info->vbase + REG_BRGCTRL_OFFSET);
+
+	if (linkctrl & HT_LINKCTRL_DETECTED)
+		__raw_writel(HT_LINKCTRL_DETECTED,
+				dev_info->vbase + REG_LINKCTRL_OFFSET);
+
+	/* Initiate Secondary Bus Reset to clear the chain failure */
+	if (errctrl & ERRCTRL_CHN_FAL)
+		__raw_writel(BRGCTRL_SECBUSRESET,
+				dev_info->vbase + REG_BRGCTRL_OFFSET);
+
+	if (errctrl & ERRCTRL_RSP_ERR)
+		__raw_writel(ERRCTRL_RSP_ERR,
+				dev_info->vbase + REG_ERRCTRL_OFFSET);
+
+	if (linkerr & HT_LINKERR_DETECTED)
+		__raw_writel(HT_LINKERR_DETECTED,
+				dev_info->vbase + REG_LINKERR_OFFSET);
+
+	edac_device_handle_ce(edac_dev, 0, 0, edac_dev->ctl_name);
+}
+
+static struct cpc925_dev_info cpc925_devs[] = {
+	{
+	.ctl_name = CPC925_CPU_ERR_DEV,
+	.init = cpc925_cpu_init,
+	.exit = cpc925_cpu_exit,
+	.check = cpc925_cpu_check,
+	},
+	{
+	.ctl_name = CPC925_HT_LINK_DEV,
+	.init = cpc925_htlink_init,
+	.exit = cpc925_htlink_exit,
+	.check = cpc925_htlink_check,
+	},
+	{0}, /* Terminated by NULL */
+};
+
+/*
+ * Add CPU Err detection and HyperTransport Link Err detection
+ * as common "edac_device", they have no corresponding device
+ * nodes in the Open Firmware DTB and we have to add platform
+ * devices for them. Also, they will share the MMIO with that
+ * of memory controller.
+ */
+static void cpc925_add_edac_devices(void __iomem *vbase)
+{
+	struct cpc925_dev_info *dev_info;
+
+	if (!vbase) {
+		cpc925_printk(KERN_ERR, "MMIO not established yet\n");
+		return;
+	}
+
+	for (dev_info = &cpc925_devs[0]; dev_info->init; dev_info++) {
+		dev_info->vbase = vbase;
+		dev_info->pdev = platform_device_register_simple(
+					dev_info->ctl_name, 0, NULL, 0);
+		if (IS_ERR(dev_info->pdev)) {
+			cpc925_printk(KERN_ERR,
+				"Can't register platform device for %s\n",
+				dev_info->ctl_name);
+			continue;
+		}
+
+		/*
+		 * Don't have to allocate private structure but
+		 * make use of cpc925_devs[] instead.
+		 */
+		dev_info->edac_idx = edac_device_alloc_index();
+		dev_info->edac_dev =
+			edac_device_alloc_ctl_info(0, dev_info->ctl_name,
+				1, NULL, 0, 0, NULL, 0, dev_info->edac_idx);
+		if (!dev_info->edac_dev) {
+			cpc925_printk(KERN_ERR, "No memory for edac device\n");
+			goto err1;
+		}
+
+		dev_info->edac_dev->pvt_info = dev_info;
+		dev_info->edac_dev->dev = &dev_info->pdev->dev;
+		dev_info->edac_dev->ctl_name = dev_info->ctl_name;
+		dev_info->edac_dev->mod_name = CPC925_EDAC_MOD_STR;
+		dev_info->edac_dev->dev_name = dev_name(&dev_info->pdev->dev);
+
+		if (edac_op_state == EDAC_OPSTATE_POLL)
+			dev_info->edac_dev->edac_check = dev_info->check;
+
+		if (dev_info->init)
+			dev_info->init(dev_info);
+
+		if (edac_device_add_device(dev_info->edac_dev) > 0) {
+			cpc925_printk(KERN_ERR,
+				"Unable to add edac device for %s\n",
+				dev_info->ctl_name);
+			goto err2;
+		}
+
+		debugf0("%s: Successfully added edac device for %s\n",
+			__func__, dev_info->ctl_name);
+
+		continue;
+
+err2:
+		if (dev_info->exit)
+			dev_info->exit(dev_info);
+		edac_device_free_ctl_info(dev_info->edac_dev);
+err1:
+		platform_device_unregister(dev_info->pdev);
+	}
+}
+
+/*
+ * Delete the common "edac_device" for CPU Err Detection
+ * and HyperTransport Link Err Detection
+ */
+static void cpc925_del_edac_devices(void)
+{
+	struct cpc925_dev_info *dev_info;
+
+	for (dev_info = &cpc925_devs[0]; dev_info->init; dev_info++) {
+		if (dev_info->edac_dev) {
+			edac_device_del_device(dev_info->edac_dev->dev);
+			edac_device_free_ctl_info(dev_info->edac_dev);
+			platform_device_unregister(dev_info->pdev);
+		}
+
+		if (dev_info->exit)
+			dev_info->exit(dev_info);
+
+		debugf0("%s: Successfully deleted edac device for %s\n",
+			__func__, dev_info->ctl_name);
+	}
+}
+
+/* Convert current back-ground scrub rate into byte/sec bandwith */
+static int cpc925_get_sdram_scrub_rate(struct mem_ctl_info *mci, u32 *bw)
+{
+	struct cpc925_mc_pdata *pdata = mci->pvt_info;
+	u32 mscr;
+	u8 si;
+
+	mscr = __raw_readl(pdata->vbase + REG_MSCR_OFFSET);
+	si = (mscr & MSCR_SI_MASK) >> MSCR_SI_SHIFT;
+
+	debugf0("%s, Mem Scrub Ctrl Register 0x%x\n", __func__, mscr);
+
+	if (((mscr & MSCR_SCRUB_MOD_MASK) != MSCR_BACKGR_SCRUB) ||
+	    (si == 0)) {
+		cpc925_mc_printk(mci, KERN_INFO, "Scrub mode not enabled\n");
+		*bw = 0;
+	} else
+		*bw = CPC925_SCRUB_BLOCK_SIZE * 0xFA67 / si;
+
+	return 0;
+}
+
+/* Return 0 for single channel; 1 for dual channel */
+static int cpc925_mc_get_channels(void __iomem *vbase)
+{
+	int dual = 0;
+	u32 mbcr;
+
+	mbcr = __raw_readl(vbase + REG_MBCR_OFFSET);
+
+	/*
+	 * Dual channel only when 128-bit wide physical bus
+	 * and 128-bit configuration.
+	 */
+	if (((mbcr & MBCR_64BITCFG_MASK) == 0) &&
+	    ((mbcr & MBCR_64BITBUS_MASK) == 0))
+		dual = 1;
+
+	debugf0("%s: %s channel\n", __func__,
+		(dual > 0) ? "Dual" : "Single");
+
+	return dual;
+}
+
+static int __devinit cpc925_probe(struct platform_device *pdev)
+{
+	static int edac_mc_idx;
+	struct mem_ctl_info *mci;
+	void __iomem *vbase;
+	struct cpc925_mc_pdata *pdata;
+	struct resource *r;
+	int res = 0, nr_channels;
+
+	debugf0("%s: %s platform device found!\n", __func__, pdev->name);
+
+	if (!devres_open_group(&pdev->dev, cpc925_probe, GFP_KERNEL)) {
+		res = -ENOMEM;
+		goto out;
+	}
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r) {
+		cpc925_printk(KERN_ERR, "Unable to get resource\n");
+		res = -ENOENT;
+		goto err1;
+	}
+
+	if (!devm_request_mem_region(&pdev->dev,
+				     r->start,
+				     r->end - r->start + 1,
+				     pdev->name)) {
+		cpc925_printk(KERN_ERR, "Unable to request mem region\n");
+		res = -EBUSY;
+		goto err1;
+	}
+
+	vbase = devm_ioremap(&pdev->dev, r->start, r->end - r->start + 1);
+	if (!vbase) {
+		cpc925_printk(KERN_ERR, "Unable to ioremap device\n");
+		res = -ENOMEM;
+		goto err2;
+	}
+
+	nr_channels = cpc925_mc_get_channels(vbase);
+	mci = edac_mc_alloc(sizeof(struct cpc925_mc_pdata),
+			CPC925_NR_CSROWS, nr_channels + 1, edac_mc_idx);
+	if (!mci) {
+		cpc925_printk(KERN_ERR, "No memory for mem_ctl_info\n");
+		res = -ENOMEM;
+		goto err2;
+	}
+
+	pdata = mci->pvt_info;
+	pdata->vbase = vbase;
+	pdata->edac_idx = edac_mc_idx++;
+	pdata->name = pdev->name;
+
+	mci->dev = &pdev->dev;
+	platform_set_drvdata(pdev, mci);
+	mci->dev_name = dev_name(&pdev->dev);
+	mci->mtype_cap = MEM_FLAG_RDDR | MEM_FLAG_DDR;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+	mci->edac_cap = EDAC_FLAG_SECDED;
+	mci->mod_name = CPC925_EDAC_MOD_STR;
+	mci->mod_ver = CPC925_EDAC_REVISION;
+	mci->ctl_name = pdev->name;
+
+	if (edac_op_state == EDAC_OPSTATE_POLL)
+		mci->edac_check = cpc925_mc_check;
+
+	mci->ctl_page_to_phys = NULL;
+	mci->scrub_mode = SCRUB_SW_SRC;
+	mci->set_sdram_scrub_rate = NULL;
+	mci->get_sdram_scrub_rate = cpc925_get_sdram_scrub_rate;
+
+	cpc925_init_csrows(mci);
+
+	/* Setup memory controller registers */
+	cpc925_mc_init(mci);
+
+	if (edac_mc_add_mc(mci) > 0) {
+		cpc925_mc_printk(mci, KERN_ERR, "Failed edac_mc_add_mc()\n");
+		goto err3;
+	}
+
+	cpc925_add_edac_devices(vbase);
+
+	/* get this far and it's successful */
+	debugf0("%s: success\n", __func__);
+
+	res = 0;
+	goto out;
+
+err3:
+	cpc925_mc_exit(mci);
+	edac_mc_free(mci);
+err2:
+	devm_release_mem_region(&pdev->dev, r->start, r->end-r->start+1);
+err1:
+	devres_release_group(&pdev->dev, cpc925_probe);
+out:
+	return res;
+}
+
+static int cpc925_remove(struct platform_device *pdev)
+{
+	struct mem_ctl_info *mci = platform_get_drvdata(pdev);
+
+	/*
+	 * Delete common edac devices before edac mc, because
+	 * the former share the MMIO of the latter.
+	 */
+	cpc925_del_edac_devices();
+	cpc925_mc_exit(mci);
+
+	edac_mc_del_mc(&pdev->dev);
+	edac_mc_free(mci);
+
+	return 0;
+}
+
+static struct platform_driver cpc925_edac_driver = {
+	.probe = cpc925_probe,
+	.remove = cpc925_remove,
+	.driver = {
+		   .name = "cpc925_edac",
+	}
+};
+
+static int __init cpc925_edac_init(void)
+{
+	int ret = 0;
+
+	printk(KERN_INFO "IBM CPC925 EDAC driver " CPC925_EDAC_REVISION "\n");
+	printk(KERN_INFO "\t(c) 2008 Wind River Systems, Inc\n");
+
+	/* Only support POLL mode so far */
+	edac_op_state = EDAC_OPSTATE_POLL;
+
+	ret = platform_driver_register(&cpc925_edac_driver);
+	if (ret) {
+		printk(KERN_WARNING "Failed to register %s\n",
+			CPC925_EDAC_MOD_STR);
+	}
+
+	return ret;
+}
+
+static void __exit cpc925_edac_exit(void)
+{
+	platform_driver_unregister(&cpc925_edac_driver);
+}
+
+module_init(cpc925_edac_init);
+module_exit(cpc925_edac_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cao Qingtao <qingtao.cao@windriver.com>");
+MODULE_DESCRIPTION("IBM CPC925 Bridge and MC EDAC kernel module");
diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h
index 48d3b140983..3493c6bdb82 100644
--- a/drivers/edac/edac_core.h
+++ b/drivers/edac/edac_core.h
@@ -841,6 +841,7 @@ extern void edac_device_handle_ue(struct edac_device_ctl_info *edac_dev,
 				int inst_nr, int block_nr, const char *msg);
 extern void edac_device_handle_ce(struct edac_device_ctl_info *edac_dev,
 				int inst_nr, int block_nr, const char *msg);
+extern int edac_device_alloc_index(void);
 
 /*
  * edac_pci APIs
diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c
index a7d2c717d03..b02a6a69a8f 100644
--- a/drivers/edac/edac_device.c
+++ b/drivers/edac/edac_device.c
@@ -490,6 +490,20 @@ void edac_device_reset_delay_period(struct edac_device_ctl_info *edac_dev,
 	mutex_unlock(&device_ctls_mutex);
 }
 
+/*
+ * edac_device_alloc_index: Allocate a unique device index number
+ *
+ * Return:
+ *	allocated index number
+ */
+int edac_device_alloc_index(void)
+{
+	static atomic_t device_indexes = ATOMIC_INIT(0);
+
+	return atomic_inc_return(&device_indexes) - 1;
+}
+EXPORT_SYMBOL_GPL(edac_device_alloc_index);
+
 /**
  * edac_device_add_device: Insert the 'edac_dev' structure into the
  * edac_device global list and create sysfs entries associated with
diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig
index 45090243820..13efcd36207 100644
--- a/drivers/firewire/Kconfig
+++ b/drivers/firewire/Kconfig
@@ -1,28 +1,29 @@
-comment "A new alternative FireWire stack is available with EXPERIMENTAL=y"
-	depends on EXPERIMENTAL=n
-
-comment "Enable only one of the two stacks, unless you know what you are doing"
-	depends on EXPERIMENTAL
+comment "You can enable one or both FireWire driver stacks."
+comment "See the help texts for more information."
 
 config FIREWIRE
-	tristate "New FireWire stack, EXPERIMENTAL"
-	depends on EXPERIMENTAL
+	tristate "FireWire driver stack"
 	select CRC_ITU_T
 	help
-	  This is the "Juju" FireWire stack, a new alternative implementation
-	  designed for robustness and simplicity.  You can build either this
-	  stack, or the old stack (the ieee1394 driver, ohci1394 etc.) or both.
-	  Please read http://ieee1394.wiki.kernel.org/index.php/Juju_Migration
-	  before you enable the new stack.
+	  This is the new-generation IEEE 1394 (FireWire) driver stack
+	  a.k.a. Juju, a new implementation designed for robustness and
+	  simplicity.
+	  See http://ieee1394.wiki.kernel.org/index.php/Juju_Migration
+	  for information about migration from the older Linux 1394 stack
+	  to the new driver stack.
 
 	  To compile this driver as a module, say M here: the module will be
 	  called firewire-core.
 
 	  This module functionally replaces ieee1394, raw1394, and video1394.
 	  To access it from application programs, you generally need at least
-	  libraw1394 version 2.  IIDC/DCAM applications also need libdc1394
-	  version 2.  No libraries are required to access storage devices
-	  through the firewire-sbp2 driver.
+	  libraw1394 v2.  IIDC/DCAM applications need libdc1394 v2.
+	  No libraries are required to access storage devices through the
+	  firewire-sbp2 driver.
+
+	  NOTE:
+	  FireWire audio devices currently require the old drivers (ieee1394,
+	  ohci1394, raw1394).
 
 config FIREWIRE_OHCI
 	tristate "OHCI-1394 controllers"
@@ -37,11 +38,9 @@ config FIREWIRE_OHCI
 	  stack.
 
 	  NOTE:
-
-	  You should only build either firewire-ohci or the old ohci1394 driver,
-	  but not both.  If you nevertheless want to install both, you should
-	  configure them only as modules and blacklist the driver(s) which you
-	  don't want to have auto-loaded.  Add either
+	  If you want to install firewire-ohci and ohci1394 together, you
+	  should configure them only as modules and blacklist the driver(s)
+	  which you don't want to have auto-loaded.  Add either
 
 	      blacklist firewire-ohci
 	  or
@@ -50,12 +49,7 @@ config FIREWIRE_OHCI
 	      blacklist dv1394
 
 	  to /etc/modprobe.conf or /etc/modprobe.d/* and update modprobe.conf
-	  depending on your distribution.  The latter two modules should be
-	  blacklisted together with ohci1394 because they depend on ohci1394.
-
-	  If you have an old modprobe which doesn't implement the blacklist
-	  directive, use "install modulename /bin/true" for the modules to be
-	  blacklisted.
+	  depending on your distribution.
 
 config FIREWIRE_OHCI_DEBUG
 	bool
@@ -77,3 +71,17 @@ config FIREWIRE_SBP2
 
 	  You should also enable support for disks, CD-ROMs, etc. in the SCSI
 	  configuration section.
+
+config FIREWIRE_NET
+	tristate "IP networking over 1394 (EXPERIMENTAL)"
+	depends on FIREWIRE && INET && EXPERIMENTAL
+	help
+	  This enables IPv4 over IEEE 1394, providing IP connectivity with
+	  other implementations of RFC 2734 as found on several operating
+	  systems.  Multicast support is currently limited.
+
+	  NOTE, this driver is not stable yet!
+
+	  To compile this driver as a module, say M here:  The module will be
+	  called firewire-net.  It replaces eth1394 of the classic IEEE 1394
+	  stack.
diff --git a/drivers/firewire/Makefile b/drivers/firewire/Makefile
index bc3b9bf822b..a8f9bb6d9fd 100644
--- a/drivers/firewire/Makefile
+++ b/drivers/firewire/Makefile
@@ -6,7 +6,9 @@ firewire-core-y += core-card.o core-cdev.o core-device.o \
                    core-iso.o core-topology.o core-transaction.o
 firewire-ohci-y += ohci.o
 firewire-sbp2-y += sbp2.o
+firewire-net-y  += net.o
 
-obj-$(CONFIG_FIREWIRE) += firewire-core.o
+obj-$(CONFIG_FIREWIRE)      += firewire-core.o
 obj-$(CONFIG_FIREWIRE_OHCI) += firewire-ohci.o
 obj-$(CONFIG_FIREWIRE_SBP2) += firewire-sbp2.o
+obj-$(CONFIG_FIREWIRE_NET)  += firewire-net.o
diff --git a/drivers/firewire/core-card.c b/drivers/firewire/core-card.c
index 4c1be64fddd..543fccac81b 100644
--- a/drivers/firewire/core-card.c
+++ b/drivers/firewire/core-card.c
@@ -176,6 +176,7 @@ int fw_core_add_descriptor(struct fw_descriptor *desc)
 
 	return 0;
 }
+EXPORT_SYMBOL(fw_core_add_descriptor);
 
 void fw_core_remove_descriptor(struct fw_descriptor *desc)
 {
@@ -189,6 +190,7 @@ void fw_core_remove_descriptor(struct fw_descriptor *desc)
 
 	mutex_unlock(&card_mutex);
 }
+EXPORT_SYMBOL(fw_core_remove_descriptor);
 
 static void allocate_broadcast_channel(struct fw_card *card, int generation)
 {
@@ -459,11 +461,11 @@ EXPORT_SYMBOL(fw_card_add);
 
 
 /*
- * The next few functions implements a dummy driver that use once a
- * card driver shuts down an fw_card.  This allows the driver to
- * cleanly unload, as all IO to the card will be handled by the dummy
- * driver instead of calling into the (possibly) unloaded module.  The
- * dummy driver just fails all IO.
+ * The next few functions implement a dummy driver that is used once a card
+ * driver shuts down an fw_card.  This allows the driver to cleanly unload,
+ * as all IO to the card will be handled (and failed) by the dummy driver
+ * instead of calling into the module.  Only functions for iso context
+ * shutdown still need to be provided by the card driver.
  */
 
 static int dummy_enable(struct fw_card *card, u32 *config_rom, size_t length)
@@ -510,7 +512,7 @@ static int dummy_enable_phys_dma(struct fw_card *card,
 	return -ENODEV;
 }
 
-static struct fw_card_driver dummy_driver = {
+static const struct fw_card_driver dummy_driver_template = {
 	.enable          = dummy_enable,
 	.update_phy_reg  = dummy_update_phy_reg,
 	.set_config_rom  = dummy_set_config_rom,
@@ -529,6 +531,8 @@ void fw_card_release(struct kref *kref)
 
 void fw_core_remove_card(struct fw_card *card)
 {
+	struct fw_card_driver dummy_driver = dummy_driver_template;
+
 	card->driver->update_phy_reg(card, 4,
 				     PHY_LINK_ACTIVE | PHY_CONTENDER, 0);
 	fw_core_initiate_bus_reset(card, 1);
@@ -537,7 +541,9 @@ void fw_core_remove_card(struct fw_card *card)
 	list_del_init(&card->link);
 	mutex_unlock(&card_mutex);
 
-	/* Set up the dummy driver. */
+	/* Switch off most of the card driver interface. */
+	dummy_driver.free_iso_context	= card->driver->free_iso_context;
+	dummy_driver.stop_iso		= card->driver->stop_iso;
 	card->driver = &dummy_driver;
 
 	fw_destroy_nodes(card);
diff --git a/drivers/firewire/core-iso.c b/drivers/firewire/core-iso.c
index 28076c892d7..166f19c6d38 100644
--- a/drivers/firewire/core-iso.c
+++ b/drivers/firewire/core-iso.c
@@ -71,7 +71,7 @@ int fw_iso_buffer_init(struct fw_iso_buffer *buffer, struct fw_card *card,
 	for (j = 0; j < i; j++) {
 		address = page_private(buffer->pages[j]);
 		dma_unmap_page(card->device, address,
-			       PAGE_SIZE, DMA_TO_DEVICE);
+			       PAGE_SIZE, direction);
 		__free_page(buffer->pages[j]);
 	}
 	kfree(buffer->pages);
@@ -80,6 +80,7 @@ int fw_iso_buffer_init(struct fw_iso_buffer *buffer, struct fw_card *card,
 
 	return -ENOMEM;
 }
+EXPORT_SYMBOL(fw_iso_buffer_init);
 
 int fw_iso_buffer_map(struct fw_iso_buffer *buffer, struct vm_area_struct *vma)
 {
@@ -107,13 +108,14 @@ void fw_iso_buffer_destroy(struct fw_iso_buffer *buffer,
 	for (i = 0; i < buffer->page_count; i++) {
 		address = page_private(buffer->pages[i]);
 		dma_unmap_page(card->device, address,
-			       PAGE_SIZE, DMA_TO_DEVICE);
+			       PAGE_SIZE, buffer->direction);
 		__free_page(buffer->pages[i]);
 	}
 
 	kfree(buffer->pages);
 	buffer->pages = NULL;
 }
+EXPORT_SYMBOL(fw_iso_buffer_destroy);
 
 struct fw_iso_context *fw_iso_context_create(struct fw_card *card,
 		int type, int channel, int speed, size_t header_size,
@@ -136,6 +138,7 @@ struct fw_iso_context *fw_iso_context_create(struct fw_card *card,
 
 	return ctx;
 }
+EXPORT_SYMBOL(fw_iso_context_create);
 
 void fw_iso_context_destroy(struct fw_iso_context *ctx)
 {
@@ -143,12 +146,14 @@ void fw_iso_context_destroy(struct fw_iso_context *ctx)
 
 	card->driver->free_iso_context(ctx);
 }
+EXPORT_SYMBOL(fw_iso_context_destroy);
 
 int fw_iso_context_start(struct fw_iso_context *ctx,
 			 int cycle, int sync, int tags)
 {
 	return ctx->card->driver->start_iso(ctx, cycle, sync, tags);
 }
+EXPORT_SYMBOL(fw_iso_context_start);
 
 int fw_iso_context_queue(struct fw_iso_context *ctx,
 			 struct fw_iso_packet *packet,
@@ -159,11 +164,13 @@ int fw_iso_context_queue(struct fw_iso_context *ctx,
 
 	return card->driver->queue_iso(ctx, packet, buffer, payload);
 }
+EXPORT_SYMBOL(fw_iso_context_queue);
 
 int fw_iso_context_stop(struct fw_iso_context *ctx)
 {
 	return ctx->card->driver->stop_iso(ctx);
 }
+EXPORT_SYMBOL(fw_iso_context_stop);
 
 /*
  * Isochronous bus resource management (channels, bandwidth), client side
diff --git a/drivers/firewire/core.h b/drivers/firewire/core.h
index 0a25a7b38a8..c3cfc647e5e 100644
--- a/drivers/firewire/core.h
+++ b/drivers/firewire/core.h
@@ -1,7 +1,6 @@
 #ifndef _FIREWIRE_CORE_H
 #define _FIREWIRE_CORE_H
 
-#include <linux/dma-mapping.h>
 #include <linux/fs.h>
 #include <linux/list.h>
 #include <linux/idr.h>
@@ -97,17 +96,6 @@ int fw_core_initiate_bus_reset(struct fw_card *card, int short_reset);
 int fw_compute_block_crc(u32 *block);
 void fw_schedule_bm_work(struct fw_card *card, unsigned long delay);
 
-struct fw_descriptor {
-	struct list_head link;
-	size_t length;
-	u32 immediate;
-	u32 key;
-	const u32 *data;
-};
-
-int fw_core_add_descriptor(struct fw_descriptor *desc);
-void fw_core_remove_descriptor(struct fw_descriptor *desc);
-
 
 /* -cdev */
 
@@ -130,77 +118,7 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event);
 
 /* -iso */
 
-/*
- * The iso packet format allows for an immediate header/payload part
- * stored in 'header' immediately after the packet info plus an
- * indirect payload part that is pointer to by the 'payload' field.
- * Applications can use one or the other or both to implement simple
- * low-bandwidth streaming (e.g. audio) or more advanced
- * scatter-gather streaming (e.g. assembling video frame automatically).
- */
-struct fw_iso_packet {
-	u16 payload_length;	/* Length of indirect payload. */
-	u32 interrupt:1;	/* Generate interrupt on this packet */
-	u32 skip:1;		/* Set to not send packet at all. */
-	u32 tag:2;
-	u32 sy:4;
-	u32 header_length:8;	/* Length of immediate header. */
-	u32 header[0];
-};
-
-#define FW_ISO_CONTEXT_TRANSMIT	0
-#define FW_ISO_CONTEXT_RECEIVE	1
-
-#define FW_ISO_CONTEXT_MATCH_TAG0	 1
-#define FW_ISO_CONTEXT_MATCH_TAG1	 2
-#define FW_ISO_CONTEXT_MATCH_TAG2	 4
-#define FW_ISO_CONTEXT_MATCH_TAG3	 8
-#define FW_ISO_CONTEXT_MATCH_ALL_TAGS	15
-
-/*
- * An iso buffer is just a set of pages mapped for DMA in the
- * specified direction.  Since the pages are to be used for DMA, they
- * are not mapped into the kernel virtual address space.  We store the
- * DMA address in the page private. The helper function
- * fw_iso_buffer_map() will map the pages into a given vma.
- */
-struct fw_iso_buffer {
-	enum dma_data_direction direction;
-	struct page **pages;
-	int page_count;
-};
-
-typedef void (*fw_iso_callback_t)(struct fw_iso_context *context,
-				  u32 cycle, size_t header_length,
-				  void *header, void *data);
-
-struct fw_iso_context {
-	struct fw_card *card;
-	int type;
-	int channel;
-	int speed;
-	size_t header_size;
-	fw_iso_callback_t callback;
-	void *callback_data;
-};
-
-int fw_iso_buffer_init(struct fw_iso_buffer *buffer, struct fw_card *card,
-		       int page_count, enum dma_data_direction direction);
 int fw_iso_buffer_map(struct fw_iso_buffer *buffer, struct vm_area_struct *vma);
-void fw_iso_buffer_destroy(struct fw_iso_buffer *buffer, struct fw_card *card);
-
-struct fw_iso_context *fw_iso_context_create(struct fw_card *card,
-		int type, int channel, int speed, size_t header_size,
-		fw_iso_callback_t callback, void *callback_data);
-int fw_iso_context_queue(struct fw_iso_context *ctx,
-			 struct fw_iso_packet *packet,
-			 struct fw_iso_buffer *buffer,
-			 unsigned long payload);
-int fw_iso_context_start(struct fw_iso_context *ctx,
-			 int cycle, int sync, int tags);
-int fw_iso_context_stop(struct fw_iso_context *ctx);
-void fw_iso_context_destroy(struct fw_iso_context *ctx);
-
 void fw_iso_resource_manage(struct fw_card *card, int generation,
 		u64 channels_mask, int *channel, int *bandwidth, bool allocate);
 
@@ -285,9 +203,4 @@ void fw_flush_transactions(struct fw_card *card);
 void fw_send_phy_config(struct fw_card *card,
 			int node_id, int generation, int gap_count);
 
-static inline int fw_stream_packet_destination_id(int tag, int channel, int sy)
-{
-	return tag << 14 | channel << 8 | sy;
-}
-
 #endif /* _FIREWIRE_CORE_H */
diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c
new file mode 100644
index 00000000000..a42209a73ae
--- /dev/null
+++ b/drivers/firewire/net.c
@@ -0,0 +1,1655 @@
+/*
+ * IPv4 over IEEE 1394, per RFC 2734
+ *
+ * Copyright (C) 2009 Jay Fenlason <fenlason@redhat.com>
+ *
+ * based on eth1394 by Ben Collins et al
+ */
+
+#include <linux/bug.h>
+#include <linux/device.h>
+#include <linux/ethtool.h>
+#include <linux/firewire.h>
+#include <linux/firewire-constants.h>
+#include <linux/highmem.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/jiffies.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/mutex.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+
+#include <asm/unaligned.h>
+#include <net/arp.h>
+
+#define FWNET_MAX_FRAGMENTS	25	/* arbitrary limit */
+#define FWNET_ISO_PAGE_COUNT	(PAGE_SIZE < 16 * 1024 ? 4 : 2)
+
+#define IEEE1394_BROADCAST_CHANNEL	31
+#define IEEE1394_ALL_NODES		(0xffc0 | 0x003f)
+#define IEEE1394_MAX_PAYLOAD_S100	512
+#define FWNET_NO_FIFO_ADDR		(~0ULL)
+
+#define IANA_SPECIFIER_ID		0x00005eU
+#define RFC2734_SW_VERSION		0x000001U
+
+#define IEEE1394_GASP_HDR_SIZE	8
+
+#define RFC2374_UNFRAG_HDR_SIZE	4
+#define RFC2374_FRAG_HDR_SIZE	8
+#define RFC2374_FRAG_OVERHEAD	4
+
+#define RFC2374_HDR_UNFRAG	0	/* unfragmented		*/
+#define RFC2374_HDR_FIRSTFRAG	1	/* first fragment	*/
+#define RFC2374_HDR_LASTFRAG	2	/* last fragment	*/
+#define RFC2374_HDR_INTFRAG	3	/* interior fragment	*/
+
+#define RFC2734_HW_ADDR_LEN	16
+
+struct rfc2734_arp {
+	__be16 hw_type;		/* 0x0018	*/
+	__be16 proto_type;	/* 0x0806       */
+	u8 hw_addr_len;		/* 16		*/
+	u8 ip_addr_len;		/* 4		*/
+	__be16 opcode;		/* ARP Opcode	*/
+	/* Above is exactly the same format as struct arphdr */
+
+	__be64 s_uniq_id;	/* Sender's 64bit EUI			*/
+	u8 max_rec;		/* Sender's max packet size		*/
+	u8 sspd;		/* Sender's max speed			*/
+	__be16 fifo_hi;		/* hi 16bits of sender's FIFO addr	*/
+	__be32 fifo_lo;		/* lo 32bits of sender's FIFO addr	*/
+	__be32 sip;		/* Sender's IP Address			*/
+	__be32 tip;		/* IP Address of requested hw addr	*/
+} __attribute__((packed));
+
+/* This header format is specific to this driver implementation. */
+#define FWNET_ALEN	8
+#define FWNET_HLEN	10
+struct fwnet_header {
+	u8 h_dest[FWNET_ALEN];	/* destination address */
+	__be16 h_proto;		/* packet type ID field */
+} __attribute__((packed));
+
+/* IPv4 and IPv6 encapsulation header */
+struct rfc2734_header {
+	u32 w0;
+	u32 w1;
+};
+
+#define fwnet_get_hdr_lf(h)		(((h)->w0 & 0xc0000000) >> 30)
+#define fwnet_get_hdr_ether_type(h)	(((h)->w0 & 0x0000ffff))
+#define fwnet_get_hdr_dg_size(h)	(((h)->w0 & 0x0fff0000) >> 16)
+#define fwnet_get_hdr_fg_off(h)		(((h)->w0 & 0x00000fff))
+#define fwnet_get_hdr_dgl(h)		(((h)->w1 & 0xffff0000) >> 16)
+
+#define fwnet_set_hdr_lf(lf)		((lf)  << 30)
+#define fwnet_set_hdr_ether_type(et)	(et)
+#define fwnet_set_hdr_dg_size(dgs)	((dgs) << 16)
+#define fwnet_set_hdr_fg_off(fgo)	(fgo)
+
+#define fwnet_set_hdr_dgl(dgl)		((dgl) << 16)
+
+static inline void fwnet_make_uf_hdr(struct rfc2734_header *hdr,
+		unsigned ether_type)
+{
+	hdr->w0 = fwnet_set_hdr_lf(RFC2374_HDR_UNFRAG)
+		  | fwnet_set_hdr_ether_type(ether_type);
+}
+
+static inline void fwnet_make_ff_hdr(struct rfc2734_header *hdr,
+		unsigned ether_type, unsigned dg_size, unsigned dgl)
+{
+	hdr->w0 = fwnet_set_hdr_lf(RFC2374_HDR_FIRSTFRAG)
+		  | fwnet_set_hdr_dg_size(dg_size)
+		  | fwnet_set_hdr_ether_type(ether_type);
+	hdr->w1 = fwnet_set_hdr_dgl(dgl);
+}
+
+static inline void fwnet_make_sf_hdr(struct rfc2734_header *hdr,
+		unsigned lf, unsigned dg_size, unsigned fg_off, unsigned dgl)
+{
+	hdr->w0 = fwnet_set_hdr_lf(lf)
+		  | fwnet_set_hdr_dg_size(dg_size)
+		  | fwnet_set_hdr_fg_off(fg_off);
+	hdr->w1 = fwnet_set_hdr_dgl(dgl);
+}
+
+/* This list keeps track of what parts of the datagram have been filled in */
+struct fwnet_fragment_info {
+	struct list_head fi_link;
+	u16 offset;
+	u16 len;
+};
+
+struct fwnet_partial_datagram {
+	struct list_head pd_link;
+	struct list_head fi_list;
+	struct sk_buff *skb;
+	/* FIXME Why not use skb->data? */
+	char *pbuf;
+	u16 datagram_label;
+	u16 ether_type;
+	u16 datagram_size;
+};
+
+static DEFINE_MUTEX(fwnet_device_mutex);
+static LIST_HEAD(fwnet_device_list);
+
+struct fwnet_device {
+	struct list_head dev_link;
+	spinlock_t lock;
+	enum {
+		FWNET_BROADCAST_ERROR,
+		FWNET_BROADCAST_RUNNING,
+		FWNET_BROADCAST_STOPPED,
+	} broadcast_state;
+	struct fw_iso_context *broadcast_rcv_context;
+	struct fw_iso_buffer broadcast_rcv_buffer;
+	void **broadcast_rcv_buffer_ptrs;
+	unsigned broadcast_rcv_next_ptr;
+	unsigned num_broadcast_rcv_ptrs;
+	unsigned rcv_buffer_size;
+	/*
+	 * This value is the maximum unfragmented datagram size that can be
+	 * sent by the hardware.  It already has the GASP overhead and the
+	 * unfragmented datagram header overhead calculated into it.
+	 */
+	unsigned broadcast_xmt_max_payload;
+	u16 broadcast_xmt_datagramlabel;
+
+	/*
+	 * The CSR address that remote nodes must send datagrams to for us to
+	 * receive them.
+	 */
+	struct fw_address_handler handler;
+	u64 local_fifo;
+
+	/* List of packets to be sent */
+	struct list_head packet_list;
+	/*
+	 * List of packets that were broadcasted.  When we get an ISO interrupt
+	 * one of them has been sent
+	 */
+	struct list_head broadcasted_list;
+	/* List of packets that have been sent but not yet acked */
+	struct list_head sent_list;
+
+	struct list_head peer_list;
+	struct fw_card *card;
+	struct net_device *netdev;
+};
+
+struct fwnet_peer {
+	struct list_head peer_link;
+	struct fwnet_device *dev;
+	u64 guid;
+	u64 fifo;
+
+	/* guarded by dev->lock */
+	struct list_head pd_list; /* received partial datagrams */
+	unsigned pdg_size;        /* pd_list size */
+
+	u16 datagram_label;       /* outgoing datagram label */
+	unsigned max_payload;     /* includes RFC2374_FRAG_HDR_SIZE overhead */
+	int node_id;
+	int generation;
+	unsigned speed;
+};
+
+/* This is our task struct. It's used for the packet complete callback.  */
+struct fwnet_packet_task {
+	/*
+	 * ptask can actually be on dev->packet_list, dev->broadcasted_list,
+	 * or dev->sent_list depending on its current state.
+	 */
+	struct list_head pt_link;
+	struct fw_transaction transaction;
+	struct rfc2734_header hdr;
+	struct sk_buff *skb;
+	struct fwnet_device *dev;
+
+	int outstanding_pkts;
+	unsigned max_payload;
+	u64 fifo_addr;
+	u16 dest_node;
+	u8 generation;
+	u8 speed;
+};
+
+/*
+ * saddr == NULL means use device source address.
+ * daddr == NULL means leave destination address (eg unresolved arp).
+ */
+static int fwnet_header_create(struct sk_buff *skb, struct net_device *net,
+			unsigned short type, const void *daddr,
+			const void *saddr, unsigned len)
+{
+	struct fwnet_header *h;
+
+	h = (struct fwnet_header *)skb_push(skb, sizeof(*h));
+	put_unaligned_be16(type, &h->h_proto);
+
+	if (net->flags & (IFF_LOOPBACK | IFF_NOARP)) {
+		memset(h->h_dest, 0, net->addr_len);
+
+		return net->hard_header_len;
+	}
+
+	if (daddr) {
+		memcpy(h->h_dest, daddr, net->addr_len);
+
+		return net->hard_header_len;
+	}
+
+	return -net->hard_header_len;
+}
+
+static int fwnet_header_rebuild(struct sk_buff *skb)
+{
+	struct fwnet_header *h = (struct fwnet_header *)skb->data;
+
+	if (get_unaligned_be16(&h->h_proto) == ETH_P_IP)
+		return arp_find((unsigned char *)&h->h_dest, skb);
+
+	fw_notify("%s: unable to resolve type %04x addresses\n",
+		  skb->dev->name, be16_to_cpu(h->h_proto));
+	return 0;
+}
+
+static int fwnet_header_cache(const struct neighbour *neigh,
+			      struct hh_cache *hh)
+{
+	struct net_device *net;
+	struct fwnet_header *h;
+
+	if (hh->hh_type == cpu_to_be16(ETH_P_802_3))
+		return -1;
+	net = neigh->dev;
+	h = (struct fwnet_header *)((u8 *)hh->hh_data + 16 - sizeof(*h));
+	h->h_proto = hh->hh_type;
+	memcpy(h->h_dest, neigh->ha, net->addr_len);
+	hh->hh_len = FWNET_HLEN;
+
+	return 0;
+}
+
+/* Called by Address Resolution module to notify changes in address. */
+static void fwnet_header_cache_update(struct hh_cache *hh,
+		const struct net_device *net, const unsigned char *haddr)
+{
+	memcpy((u8 *)hh->hh_data + 16 - FWNET_HLEN, haddr, net->addr_len);
+}
+
+static int fwnet_header_parse(const struct sk_buff *skb, unsigned char *haddr)
+{
+	memcpy(haddr, skb->dev->dev_addr, FWNET_ALEN);
+
+	return FWNET_ALEN;
+}
+
+static const struct header_ops fwnet_header_ops = {
+	.create         = fwnet_header_create,
+	.rebuild        = fwnet_header_rebuild,
+	.cache		= fwnet_header_cache,
+	.cache_update	= fwnet_header_cache_update,
+	.parse          = fwnet_header_parse,
+};
+
+/* FIXME: is this correct for all cases? */
+static bool fwnet_frag_overlap(struct fwnet_partial_datagram *pd,
+			       unsigned offset, unsigned len)
+{
+	struct fwnet_fragment_info *fi;
+	unsigned end = offset + len;
+
+	list_for_each_entry(fi, &pd->fi_list, fi_link)
+		if (offset < fi->offset + fi->len && end > fi->offset)
+			return true;
+
+	return false;
+}
+
+/* Assumes that new fragment does not overlap any existing fragments */
+static struct fwnet_fragment_info *fwnet_frag_new(
+	struct fwnet_partial_datagram *pd, unsigned offset, unsigned len)
+{
+	struct fwnet_fragment_info *fi, *fi2, *new;
+	struct list_head *list;
+
+	list = &pd->fi_list;
+	list_for_each_entry(fi, &pd->fi_list, fi_link) {
+		if (fi->offset + fi->len == offset) {
+			/* The new fragment can be tacked on to the end */
+			/* Did the new fragment plug a hole? */
+			fi2 = list_entry(fi->fi_link.next,
+					 struct fwnet_fragment_info, fi_link);
+			if (fi->offset + fi->len == fi2->offset) {
+				/* glue fragments together */
+				fi->len += len + fi2->len;
+				list_del(&fi2->fi_link);
+				kfree(fi2);
+			} else {
+				fi->len += len;
+			}
+
+			return fi;
+		}
+		if (offset + len == fi->offset) {
+			/* The new fragment can be tacked on to the beginning */
+			/* Did the new fragment plug a hole? */
+			fi2 = list_entry(fi->fi_link.prev,
+					 struct fwnet_fragment_info, fi_link);
+			if (fi2->offset + fi2->len == fi->offset) {
+				/* glue fragments together */
+				fi2->len += fi->len + len;
+				list_del(&fi->fi_link);
+				kfree(fi);
+
+				return fi2;
+			}
+			fi->offset = offset;
+			fi->len += len;
+
+			return fi;
+		}
+		if (offset > fi->offset + fi->len) {
+			list = &fi->fi_link;
+			break;
+		}
+		if (offset + len < fi->offset) {
+			list = fi->fi_link.prev;
+			break;
+		}
+	}
+
+	new = kmalloc(sizeof(*new), GFP_ATOMIC);
+	if (!new) {
+		fw_error("out of memory\n");
+		return NULL;
+	}
+
+	new->offset = offset;
+	new->len = len;
+	list_add(&new->fi_link, list);
+
+	return new;
+}
+
+static struct fwnet_partial_datagram *fwnet_pd_new(struct net_device *net,
+		struct fwnet_peer *peer, u16 datagram_label, unsigned dg_size,
+		void *frag_buf, unsigned frag_off, unsigned frag_len)
+{
+	struct fwnet_partial_datagram *new;
+	struct fwnet_fragment_info *fi;
+
+	new = kmalloc(sizeof(*new), GFP_ATOMIC);
+	if (!new)
+		goto fail;
+
+	INIT_LIST_HEAD(&new->fi_list);
+	fi = fwnet_frag_new(new, frag_off, frag_len);
+	if (fi == NULL)
+		goto fail_w_new;
+
+	new->datagram_label = datagram_label;
+	new->datagram_size = dg_size;
+	new->skb = dev_alloc_skb(dg_size + net->hard_header_len + 15);
+	if (new->skb == NULL)
+		goto fail_w_fi;
+
+	skb_reserve(new->skb, (net->hard_header_len + 15) & ~15);
+	new->pbuf = skb_put(new->skb, dg_size);
+	memcpy(new->pbuf + frag_off, frag_buf, frag_len);
+	list_add_tail(&new->pd_link, &peer->pd_list);
+
+	return new;
+
+fail_w_fi:
+	kfree(fi);
+fail_w_new:
+	kfree(new);
+fail:
+	fw_error("out of memory\n");
+
+	return NULL;
+}
+
+static struct fwnet_partial_datagram *fwnet_pd_find(struct fwnet_peer *peer,
+						    u16 datagram_label)
+{
+	struct fwnet_partial_datagram *pd;
+
+	list_for_each_entry(pd, &peer->pd_list, pd_link)
+		if (pd->datagram_label == datagram_label)
+			return pd;
+
+	return NULL;
+}
+
+
+static void fwnet_pd_delete(struct fwnet_partial_datagram *old)
+{
+	struct fwnet_fragment_info *fi, *n;
+
+	list_for_each_entry_safe(fi, n, &old->fi_list, fi_link)
+		kfree(fi);
+
+	list_del(&old->pd_link);
+	dev_kfree_skb_any(old->skb);
+	kfree(old);
+}
+
+static bool fwnet_pd_update(struct fwnet_peer *peer,
+		struct fwnet_partial_datagram *pd, void *frag_buf,
+		unsigned frag_off, unsigned frag_len)
+{
+	if (fwnet_frag_new(pd, frag_off, frag_len) == NULL)
+		return false;
+
+	memcpy(pd->pbuf + frag_off, frag_buf, frag_len);
+
+	/*
+	 * Move list entry to beginnig of list so that oldest partial
+	 * datagrams percolate to the end of the list
+	 */
+	list_move_tail(&pd->pd_link, &peer->pd_list);
+
+	return true;
+}
+
+static bool fwnet_pd_is_complete(struct fwnet_partial_datagram *pd)
+{
+	struct fwnet_fragment_info *fi;
+
+	fi = list_entry(pd->fi_list.next, struct fwnet_fragment_info, fi_link);
+
+	return fi->len == pd->datagram_size;
+}
+
+/* caller must hold dev->lock */
+static struct fwnet_peer *fwnet_peer_find_by_guid(struct fwnet_device *dev,
+						  u64 guid)
+{
+	struct fwnet_peer *peer;
+
+	list_for_each_entry(peer, &dev->peer_list, peer_link)
+		if (peer->guid == guid)
+			return peer;
+
+	return NULL;
+}
+
+/* caller must hold dev->lock */
+static struct fwnet_peer *fwnet_peer_find_by_node_id(struct fwnet_device *dev,
+						int node_id, int generation)
+{
+	struct fwnet_peer *peer;
+
+	list_for_each_entry(peer, &dev->peer_list, peer_link)
+		if (peer->node_id    == node_id &&
+		    peer->generation == generation)
+			return peer;
+
+	return NULL;
+}
+
+/* See IEEE 1394-2008 table 6-4, table 8-8, table 16-18. */
+static unsigned fwnet_max_payload(unsigned max_rec, unsigned speed)
+{
+	max_rec = min(max_rec, speed + 8);
+	max_rec = min(max_rec, 0xbU); /* <= 4096 */
+	if (max_rec < 8) {
+		fw_notify("max_rec %x out of range\n", max_rec);
+		max_rec = 8;
+	}
+
+	return (1 << (max_rec + 1)) - RFC2374_FRAG_HDR_SIZE;
+}
+
+
+static int fwnet_finish_incoming_packet(struct net_device *net,
+					struct sk_buff *skb, u16 source_node_id,
+					bool is_broadcast, u16 ether_type)
+{
+	struct fwnet_device *dev;
+	static const __be64 broadcast_hw = cpu_to_be64(~0ULL);
+	int status;
+	__be64 guid;
+
+	dev = netdev_priv(net);
+	/* Write metadata, and then pass to the receive level */
+	skb->dev = net;
+	skb->ip_summed = CHECKSUM_UNNECESSARY;  /* don't check it */
+
+	/*
+	 * Parse the encapsulation header. This actually does the job of
+	 * converting to an ethernet frame header, as well as arp
+	 * conversion if needed. ARP conversion is easier in this
+	 * direction, since we are using ethernet as our backend.
+	 */
+	/*
+	 * If this is an ARP packet, convert it. First, we want to make
+	 * use of some of the fields, since they tell us a little bit
+	 * about the sending machine.
+	 */
+	if (ether_type == ETH_P_ARP) {
+		struct rfc2734_arp *arp1394;
+		struct arphdr *arp;
+		unsigned char *arp_ptr;
+		u64 fifo_addr;
+		u64 peer_guid;
+		unsigned sspd;
+		u16 max_payload;
+		struct fwnet_peer *peer;
+		unsigned long flags;
+
+		arp1394   = (struct rfc2734_arp *)skb->data;
+		arp       = (struct arphdr *)skb->data;
+		arp_ptr   = (unsigned char *)(arp + 1);
+		peer_guid = get_unaligned_be64(&arp1394->s_uniq_id);
+		fifo_addr = (u64)get_unaligned_be16(&arp1394->fifo_hi) << 32
+				| get_unaligned_be32(&arp1394->fifo_lo);
+
+		sspd = arp1394->sspd;
+		/* Sanity check.  OS X 10.3 PPC reportedly sends 131. */
+		if (sspd > SCODE_3200) {
+			fw_notify("sspd %x out of range\n", sspd);
+			sspd = SCODE_3200;
+		}
+		max_payload = fwnet_max_payload(arp1394->max_rec, sspd);
+
+		spin_lock_irqsave(&dev->lock, flags);
+		peer = fwnet_peer_find_by_guid(dev, peer_guid);
+		if (peer) {
+			peer->fifo = fifo_addr;
+
+			if (peer->speed > sspd)
+				peer->speed = sspd;
+			if (peer->max_payload > max_payload)
+				peer->max_payload = max_payload;
+		}
+		spin_unlock_irqrestore(&dev->lock, flags);
+
+		if (!peer) {
+			fw_notify("No peer for ARP packet from %016llx\n",
+				  (unsigned long long)peer_guid);
+			goto failed_proto;
+		}
+
+		/*
+		 * Now that we're done with the 1394 specific stuff, we'll
+		 * need to alter some of the data.  Believe it or not, all
+		 * that needs to be done is sender_IP_address needs to be
+		 * moved, the destination hardware address get stuffed
+		 * in and the hardware address length set to 8.
+		 *
+		 * IMPORTANT: The code below overwrites 1394 specific data
+		 * needed above so keep the munging of the data for the
+		 * higher level IP stack last.
+		 */
+
+		arp->ar_hln = 8;
+		/* skip over sender unique id */
+		arp_ptr += arp->ar_hln;
+		/* move sender IP addr */
+		put_unaligned(arp1394->sip, (u32 *)arp_ptr);
+		/* skip over sender IP addr */
+		arp_ptr += arp->ar_pln;
+
+		if (arp->ar_op == htons(ARPOP_REQUEST))
+			memset(arp_ptr, 0, sizeof(u64));
+		else
+			memcpy(arp_ptr, net->dev_addr, sizeof(u64));
+	}
+
+	/* Now add the ethernet header. */
+	guid = cpu_to_be64(dev->card->guid);
+	if (dev_hard_header(skb, net, ether_type,
+			   is_broadcast ? &broadcast_hw : &guid,
+			   NULL, skb->len) >= 0) {
+		struct fwnet_header *eth;
+		u16 *rawp;
+		__be16 protocol;
+
+		skb_reset_mac_header(skb);
+		skb_pull(skb, sizeof(*eth));
+		eth = (struct fwnet_header *)skb_mac_header(skb);
+		if (*eth->h_dest & 1) {
+			if (memcmp(eth->h_dest, net->broadcast,
+				   net->addr_len) == 0)
+				skb->pkt_type = PACKET_BROADCAST;
+#if 0
+			else
+				skb->pkt_type = PACKET_MULTICAST;
+#endif
+		} else {
+			if (memcmp(eth->h_dest, net->dev_addr, net->addr_len))
+				skb->pkt_type = PACKET_OTHERHOST;
+		}
+		if (ntohs(eth->h_proto) >= 1536) {
+			protocol = eth->h_proto;
+		} else {
+			rawp = (u16 *)skb->data;
+			if (*rawp == 0xffff)
+				protocol = htons(ETH_P_802_3);
+			else
+				protocol = htons(ETH_P_802_2);
+		}
+		skb->protocol = protocol;
+	}
+	status = netif_rx(skb);
+	if (status == NET_RX_DROP) {
+		net->stats.rx_errors++;
+		net->stats.rx_dropped++;
+	} else {
+		net->stats.rx_packets++;
+		net->stats.rx_bytes += skb->len;
+	}
+	if (netif_queue_stopped(net))
+		netif_wake_queue(net);
+
+	return 0;
+
+ failed_proto:
+	net->stats.rx_errors++;
+	net->stats.rx_dropped++;
+
+	dev_kfree_skb_any(skb);
+	if (netif_queue_stopped(net))
+		netif_wake_queue(net);
+
+	net->last_rx = jiffies;
+
+	return 0;
+}
+
+static int fwnet_incoming_packet(struct fwnet_device *dev, __be32 *buf, int len,
+				 int source_node_id, int generation,
+				 bool is_broadcast)
+{
+	struct sk_buff *skb;
+	struct net_device *net = dev->netdev;
+	struct rfc2734_header hdr;
+	unsigned lf;
+	unsigned long flags;
+	struct fwnet_peer *peer;
+	struct fwnet_partial_datagram *pd;
+	int fg_off;
+	int dg_size;
+	u16 datagram_label;
+	int retval;
+	u16 ether_type;
+
+	hdr.w0 = be32_to_cpu(buf[0]);
+	lf = fwnet_get_hdr_lf(&hdr);
+	if (lf == RFC2374_HDR_UNFRAG) {
+		/*
+		 * An unfragmented datagram has been received by the ieee1394
+		 * bus. Build an skbuff around it so we can pass it to the
+		 * high level network layer.
+		 */
+		ether_type = fwnet_get_hdr_ether_type(&hdr);
+		buf++;
+		len -= RFC2374_UNFRAG_HDR_SIZE;
+
+		skb = dev_alloc_skb(len + net->hard_header_len + 15);
+		if (unlikely(!skb)) {
+			fw_error("out of memory\n");
+			net->stats.rx_dropped++;
+
+			return -1;
+		}
+		skb_reserve(skb, (net->hard_header_len + 15) & ~15);
+		memcpy(skb_put(skb, len), buf, len);
+
+		return fwnet_finish_incoming_packet(net, skb, source_node_id,
+						    is_broadcast, ether_type);
+	}
+	/* A datagram fragment has been received, now the fun begins. */
+	hdr.w1 = ntohl(buf[1]);
+	buf += 2;
+	len -= RFC2374_FRAG_HDR_SIZE;
+	if (lf == RFC2374_HDR_FIRSTFRAG) {
+		ether_type = fwnet_get_hdr_ether_type(&hdr);
+		fg_off = 0;
+	} else {
+		ether_type = 0;
+		fg_off = fwnet_get_hdr_fg_off(&hdr);
+	}
+	datagram_label = fwnet_get_hdr_dgl(&hdr);
+	dg_size = fwnet_get_hdr_dg_size(&hdr); /* ??? + 1 */
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	peer = fwnet_peer_find_by_node_id(dev, source_node_id, generation);
+	if (!peer)
+		goto bad_proto;
+
+	pd = fwnet_pd_find(peer, datagram_label);
+	if (pd == NULL) {
+		while (peer->pdg_size >= FWNET_MAX_FRAGMENTS) {
+			/* remove the oldest */
+			fwnet_pd_delete(list_first_entry(&peer->pd_list,
+				struct fwnet_partial_datagram, pd_link));
+			peer->pdg_size--;
+		}
+		pd = fwnet_pd_new(net, peer, datagram_label,
+				  dg_size, buf, fg_off, len);
+		if (pd == NULL) {
+			retval = -ENOMEM;
+			goto bad_proto;
+		}
+		peer->pdg_size++;
+	} else {
+		if (fwnet_frag_overlap(pd, fg_off, len) ||
+		    pd->datagram_size != dg_size) {
+			/*
+			 * Differing datagram sizes or overlapping fragments,
+			 * discard old datagram and start a new one.
+			 */
+			fwnet_pd_delete(pd);
+			pd = fwnet_pd_new(net, peer, datagram_label,
+					  dg_size, buf, fg_off, len);
+			if (pd == NULL) {
+				retval = -ENOMEM;
+				peer->pdg_size--;
+				goto bad_proto;
+			}
+		} else {
+			if (!fwnet_pd_update(peer, pd, buf, fg_off, len)) {
+				/*
+				 * Couldn't save off fragment anyway
+				 * so might as well obliterate the
+				 * datagram now.
+				 */
+				fwnet_pd_delete(pd);
+				peer->pdg_size--;
+				goto bad_proto;
+			}
+		}
+	} /* new datagram or add to existing one */
+
+	if (lf == RFC2374_HDR_FIRSTFRAG)
+		pd->ether_type = ether_type;
+
+	if (fwnet_pd_is_complete(pd)) {
+		ether_type = pd->ether_type;
+		peer->pdg_size--;
+		skb = skb_get(pd->skb);
+		fwnet_pd_delete(pd);
+
+		spin_unlock_irqrestore(&dev->lock, flags);
+
+		return fwnet_finish_incoming_packet(net, skb, source_node_id,
+						    false, ether_type);
+	}
+	/*
+	 * Datagram is not complete, we're done for the
+	 * moment.
+	 */
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return 0;
+
+ bad_proto:
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	if (netif_queue_stopped(net))
+		netif_wake_queue(net);
+
+	return 0;
+}
+
+static void fwnet_receive_packet(struct fw_card *card, struct fw_request *r,
+		int tcode, int destination, int source, int generation,
+		int speed, unsigned long long offset, void *payload,
+		size_t length, void *callback_data)
+{
+	struct fwnet_device *dev = callback_data;
+	int rcode;
+
+	if (destination == IEEE1394_ALL_NODES) {
+		kfree(r);
+
+		return;
+	}
+
+	if (offset != dev->handler.offset)
+		rcode = RCODE_ADDRESS_ERROR;
+	else if (tcode != TCODE_WRITE_BLOCK_REQUEST)
+		rcode = RCODE_TYPE_ERROR;
+	else if (fwnet_incoming_packet(dev, payload, length,
+				       source, generation, false) != 0) {
+		fw_error("Incoming packet failure\n");
+		rcode = RCODE_CONFLICT_ERROR;
+	} else
+		rcode = RCODE_COMPLETE;
+
+	fw_send_response(card, r, rcode);
+}
+
+static void fwnet_receive_broadcast(struct fw_iso_context *context,
+		u32 cycle, size_t header_length, void *header, void *data)
+{
+	struct fwnet_device *dev;
+	struct fw_iso_packet packet;
+	struct fw_card *card;
+	__be16 *hdr_ptr;
+	__be32 *buf_ptr;
+	int retval;
+	u32 length;
+	u16 source_node_id;
+	u32 specifier_id;
+	u32 ver;
+	unsigned long offset;
+	unsigned long flags;
+
+	dev = data;
+	card = dev->card;
+	hdr_ptr = header;
+	length = be16_to_cpup(hdr_ptr);
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	offset = dev->rcv_buffer_size * dev->broadcast_rcv_next_ptr;
+	buf_ptr = dev->broadcast_rcv_buffer_ptrs[dev->broadcast_rcv_next_ptr++];
+	if (dev->broadcast_rcv_next_ptr == dev->num_broadcast_rcv_ptrs)
+		dev->broadcast_rcv_next_ptr = 0;
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	specifier_id =    (be32_to_cpu(buf_ptr[0]) & 0xffff) << 8
+			| (be32_to_cpu(buf_ptr[1]) & 0xff000000) >> 24;
+	ver = be32_to_cpu(buf_ptr[1]) & 0xffffff;
+	source_node_id = be32_to_cpu(buf_ptr[0]) >> 16;
+
+	if (specifier_id == IANA_SPECIFIER_ID && ver == RFC2734_SW_VERSION) {
+		buf_ptr += 2;
+		length -= IEEE1394_GASP_HDR_SIZE;
+		fwnet_incoming_packet(dev, buf_ptr, length,
+				      source_node_id, -1, true);
+	}
+
+	packet.payload_length = dev->rcv_buffer_size;
+	packet.interrupt = 1;
+	packet.skip = 0;
+	packet.tag = 3;
+	packet.sy = 0;
+	packet.header_length = IEEE1394_GASP_HDR_SIZE;
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	retval = fw_iso_context_queue(dev->broadcast_rcv_context, &packet,
+				      &dev->broadcast_rcv_buffer, offset);
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	if (retval < 0)
+		fw_error("requeue failed\n");
+}
+
+static struct kmem_cache *fwnet_packet_task_cache;
+
+static int fwnet_send_packet(struct fwnet_packet_task *ptask);
+
+static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask)
+{
+	struct fwnet_device *dev;
+	unsigned long flags;
+
+	dev = ptask->dev;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	list_del(&ptask->pt_link);
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	ptask->outstanding_pkts--; /* FIXME access inside lock */
+
+	if (ptask->outstanding_pkts > 0) {
+		u16 dg_size;
+		u16 fg_off;
+		u16 datagram_label;
+		u16 lf;
+		struct sk_buff *skb;
+
+		/* Update the ptask to point to the next fragment and send it */
+		lf = fwnet_get_hdr_lf(&ptask->hdr);
+		switch (lf) {
+		case RFC2374_HDR_LASTFRAG:
+		case RFC2374_HDR_UNFRAG:
+		default:
+			fw_error("Outstanding packet %x lf %x, header %x,%x\n",
+				 ptask->outstanding_pkts, lf, ptask->hdr.w0,
+				 ptask->hdr.w1);
+			BUG();
+
+		case RFC2374_HDR_FIRSTFRAG:
+			/* Set frag type here for future interior fragments */
+			dg_size = fwnet_get_hdr_dg_size(&ptask->hdr);
+			fg_off = ptask->max_payload - RFC2374_FRAG_HDR_SIZE;
+			datagram_label = fwnet_get_hdr_dgl(&ptask->hdr);
+			break;
+
+		case RFC2374_HDR_INTFRAG:
+			dg_size = fwnet_get_hdr_dg_size(&ptask->hdr);
+			fg_off = fwnet_get_hdr_fg_off(&ptask->hdr)
+				  + ptask->max_payload - RFC2374_FRAG_HDR_SIZE;
+			datagram_label = fwnet_get_hdr_dgl(&ptask->hdr);
+			break;
+		}
+		skb = ptask->skb;
+		skb_pull(skb, ptask->max_payload);
+		if (ptask->outstanding_pkts > 1) {
+			fwnet_make_sf_hdr(&ptask->hdr, RFC2374_HDR_INTFRAG,
+					  dg_size, fg_off, datagram_label);
+		} else {
+			fwnet_make_sf_hdr(&ptask->hdr, RFC2374_HDR_LASTFRAG,
+					  dg_size, fg_off, datagram_label);
+			ptask->max_payload = skb->len + RFC2374_FRAG_HDR_SIZE;
+		}
+		fwnet_send_packet(ptask);
+	} else {
+		dev_kfree_skb_any(ptask->skb);
+		kmem_cache_free(fwnet_packet_task_cache, ptask);
+	}
+}
+
+static void fwnet_write_complete(struct fw_card *card, int rcode,
+				 void *payload, size_t length, void *data)
+{
+	struct fwnet_packet_task *ptask;
+
+	ptask = data;
+
+	if (rcode == RCODE_COMPLETE)
+		fwnet_transmit_packet_done(ptask);
+	else
+		fw_error("fwnet_write_complete: failed: %x\n", rcode);
+		/* ??? error recovery */
+}
+
+static int fwnet_send_packet(struct fwnet_packet_task *ptask)
+{
+	struct fwnet_device *dev;
+	unsigned tx_len;
+	struct rfc2734_header *bufhdr;
+	unsigned long flags;
+
+	dev = ptask->dev;
+	tx_len = ptask->max_payload;
+	switch (fwnet_get_hdr_lf(&ptask->hdr)) {
+	case RFC2374_HDR_UNFRAG:
+		bufhdr = (struct rfc2734_header *)
+				skb_push(ptask->skb, RFC2374_UNFRAG_HDR_SIZE);
+		put_unaligned_be32(ptask->hdr.w0, &bufhdr->w0);
+		break;
+
+	case RFC2374_HDR_FIRSTFRAG:
+	case RFC2374_HDR_INTFRAG:
+	case RFC2374_HDR_LASTFRAG:
+		bufhdr = (struct rfc2734_header *)
+				skb_push(ptask->skb, RFC2374_FRAG_HDR_SIZE);
+		put_unaligned_be32(ptask->hdr.w0, &bufhdr->w0);
+		put_unaligned_be32(ptask->hdr.w1, &bufhdr->w1);
+		break;
+
+	default:
+		BUG();
+	}
+	if (ptask->dest_node == IEEE1394_ALL_NODES) {
+		u8 *p;
+		int generation;
+		int node_id;
+
+		/* ptask->generation may not have been set yet */
+		generation = dev->card->generation;
+		smp_rmb();
+		node_id = dev->card->node_id;
+
+		p = skb_push(ptask->skb, 8);
+		put_unaligned_be32(node_id << 16 | IANA_SPECIFIER_ID >> 8, p);
+		put_unaligned_be32((IANA_SPECIFIER_ID & 0xff) << 24
+						| RFC2734_SW_VERSION, &p[4]);
+
+		/* We should not transmit if broadcast_channel.valid == 0. */
+		fw_send_request(dev->card, &ptask->transaction,
+				TCODE_STREAM_DATA,
+				fw_stream_packet_destination_id(3,
+						IEEE1394_BROADCAST_CHANNEL, 0),
+				generation, SCODE_100, 0ULL, ptask->skb->data,
+				tx_len + 8, fwnet_write_complete, ptask);
+
+		/* FIXME race? */
+		spin_lock_irqsave(&dev->lock, flags);
+		list_add_tail(&ptask->pt_link, &dev->broadcasted_list);
+		spin_unlock_irqrestore(&dev->lock, flags);
+
+		return 0;
+	}
+
+	fw_send_request(dev->card, &ptask->transaction,
+			TCODE_WRITE_BLOCK_REQUEST, ptask->dest_node,
+			ptask->generation, ptask->speed, ptask->fifo_addr,
+			ptask->skb->data, tx_len, fwnet_write_complete, ptask);
+
+	/* FIXME race? */
+	spin_lock_irqsave(&dev->lock, flags);
+	list_add_tail(&ptask->pt_link, &dev->sent_list);
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	dev->netdev->trans_start = jiffies;
+
+	return 0;
+}
+
+static int fwnet_broadcast_start(struct fwnet_device *dev)
+{
+	struct fw_iso_context *context;
+	int retval;
+	unsigned num_packets;
+	unsigned max_receive;
+	struct fw_iso_packet packet;
+	unsigned long offset;
+	unsigned u;
+
+	if (dev->local_fifo == FWNET_NO_FIFO_ADDR) {
+		/* outside OHCI posted write area? */
+		static const struct fw_address_region region = {
+			.start = 0xffff00000000ULL,
+			.end   = CSR_REGISTER_BASE,
+		};
+
+		dev->handler.length = 4096;
+		dev->handler.address_callback = fwnet_receive_packet;
+		dev->handler.callback_data = dev;
+
+		retval = fw_core_add_address_handler(&dev->handler, &region);
+		if (retval < 0)
+			goto failed_initial;
+
+		dev->local_fifo = dev->handler.offset;
+	}
+
+	max_receive = 1U << (dev->card->max_receive + 1);
+	num_packets = (FWNET_ISO_PAGE_COUNT * PAGE_SIZE) / max_receive;
+
+	if (!dev->broadcast_rcv_context) {
+		void **ptrptr;
+
+		context = fw_iso_context_create(dev->card,
+		    FW_ISO_CONTEXT_RECEIVE, IEEE1394_BROADCAST_CHANNEL,
+		    dev->card->link_speed, 8, fwnet_receive_broadcast, dev);
+		if (IS_ERR(context)) {
+			retval = PTR_ERR(context);
+			goto failed_context_create;
+		}
+
+		retval = fw_iso_buffer_init(&dev->broadcast_rcv_buffer,
+		    dev->card, FWNET_ISO_PAGE_COUNT, DMA_FROM_DEVICE);
+		if (retval < 0)
+			goto failed_buffer_init;
+
+		ptrptr = kmalloc(sizeof(void *) * num_packets, GFP_KERNEL);
+		if (!ptrptr) {
+			retval = -ENOMEM;
+			goto failed_ptrs_alloc;
+		}
+
+		dev->broadcast_rcv_buffer_ptrs = ptrptr;
+		for (u = 0; u < FWNET_ISO_PAGE_COUNT; u++) {
+			void *ptr;
+			unsigned v;
+
+			ptr = kmap(dev->broadcast_rcv_buffer.pages[u]);
+			for (v = 0; v < num_packets / FWNET_ISO_PAGE_COUNT; v++)
+				*ptrptr++ = (void *)
+						((char *)ptr + v * max_receive);
+		}
+		dev->broadcast_rcv_context = context;
+	} else {
+		context = dev->broadcast_rcv_context;
+	}
+
+	packet.payload_length = max_receive;
+	packet.interrupt = 1;
+	packet.skip = 0;
+	packet.tag = 3;
+	packet.sy = 0;
+	packet.header_length = IEEE1394_GASP_HDR_SIZE;
+	offset = 0;
+
+	for (u = 0; u < num_packets; u++) {
+		retval = fw_iso_context_queue(context, &packet,
+				&dev->broadcast_rcv_buffer, offset);
+		if (retval < 0)
+			goto failed_rcv_queue;
+
+		offset += max_receive;
+	}
+	dev->num_broadcast_rcv_ptrs = num_packets;
+	dev->rcv_buffer_size = max_receive;
+	dev->broadcast_rcv_next_ptr = 0U;
+	retval = fw_iso_context_start(context, -1, 0,
+			FW_ISO_CONTEXT_MATCH_ALL_TAGS); /* ??? sync */
+	if (retval < 0)
+		goto failed_rcv_queue;
+
+	/* FIXME: adjust it according to the min. speed of all known peers? */
+	dev->broadcast_xmt_max_payload = IEEE1394_MAX_PAYLOAD_S100
+			- IEEE1394_GASP_HDR_SIZE - RFC2374_UNFRAG_HDR_SIZE;
+	dev->broadcast_state = FWNET_BROADCAST_RUNNING;
+
+	return 0;
+
+ failed_rcv_queue:
+	kfree(dev->broadcast_rcv_buffer_ptrs);
+	dev->broadcast_rcv_buffer_ptrs = NULL;
+ failed_ptrs_alloc:
+	fw_iso_buffer_destroy(&dev->broadcast_rcv_buffer, dev->card);
+ failed_buffer_init:
+	fw_iso_context_destroy(context);
+	dev->broadcast_rcv_context = NULL;
+ failed_context_create:
+	fw_core_remove_address_handler(&dev->handler);
+ failed_initial:
+	dev->local_fifo = FWNET_NO_FIFO_ADDR;
+
+	return retval;
+}
+
+/* ifup */
+static int fwnet_open(struct net_device *net)
+{
+	struct fwnet_device *dev = netdev_priv(net);
+	int ret;
+
+	if (dev->broadcast_state == FWNET_BROADCAST_ERROR) {
+		ret = fwnet_broadcast_start(dev);
+		if (ret)
+			return ret;
+	}
+	netif_start_queue(net);
+
+	return 0;
+}
+
+/* ifdown */
+static int fwnet_stop(struct net_device *net)
+{
+	netif_stop_queue(net);
+
+	/* Deallocate iso context for use by other applications? */
+
+	return 0;
+}
+
+static int fwnet_tx(struct sk_buff *skb, struct net_device *net)
+{
+	struct fwnet_header hdr_buf;
+	struct fwnet_device *dev = netdev_priv(net);
+	__be16 proto;
+	u16 dest_node;
+	unsigned max_payload;
+	u16 dg_size;
+	u16 *datagram_label_ptr;
+	struct fwnet_packet_task *ptask;
+	struct fwnet_peer *peer;
+	unsigned long flags;
+
+	ptask = kmem_cache_alloc(fwnet_packet_task_cache, GFP_ATOMIC);
+	if (ptask == NULL)
+		goto fail;
+
+	skb = skb_share_check(skb, GFP_ATOMIC);
+	if (!skb)
+		goto fail;
+
+	/*
+	 * Make a copy of the driver-specific header.
+	 * We might need to rebuild the header on tx failure.
+	 */
+	memcpy(&hdr_buf, skb->data, sizeof(hdr_buf));
+	skb_pull(skb, sizeof(hdr_buf));
+
+	proto = hdr_buf.h_proto;
+	dg_size = skb->len;
+
+	/* serialize access to peer, including peer->datagram_label */
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/*
+	 * Set the transmission type for the packet.  ARP packets and IP
+	 * broadcast packets are sent via GASP.
+	 */
+	if (memcmp(hdr_buf.h_dest, net->broadcast, FWNET_ALEN) == 0
+	    || proto == htons(ETH_P_ARP)
+	    || (proto == htons(ETH_P_IP)
+		&& IN_MULTICAST(ntohl(ip_hdr(skb)->daddr)))) {
+		max_payload        = dev->broadcast_xmt_max_payload;
+		datagram_label_ptr = &dev->broadcast_xmt_datagramlabel;
+
+		ptask->fifo_addr   = FWNET_NO_FIFO_ADDR;
+		ptask->generation  = 0;
+		ptask->dest_node   = IEEE1394_ALL_NODES;
+		ptask->speed       = SCODE_100;
+	} else {
+		__be64 guid = get_unaligned((__be64 *)hdr_buf.h_dest);
+		u8 generation;
+
+		peer = fwnet_peer_find_by_guid(dev, be64_to_cpu(guid));
+		if (!peer || peer->fifo == FWNET_NO_FIFO_ADDR)
+			goto fail_unlock;
+
+		generation         = peer->generation;
+		dest_node          = peer->node_id;
+		max_payload        = peer->max_payload;
+		datagram_label_ptr = &peer->datagram_label;
+
+		ptask->fifo_addr   = peer->fifo;
+		ptask->generation  = generation;
+		ptask->dest_node   = dest_node;
+		ptask->speed       = peer->speed;
+	}
+
+	/* If this is an ARP packet, convert it */
+	if (proto == htons(ETH_P_ARP)) {
+		struct arphdr *arp = (struct arphdr *)skb->data;
+		unsigned char *arp_ptr = (unsigned char *)(arp + 1);
+		struct rfc2734_arp *arp1394 = (struct rfc2734_arp *)skb->data;
+		__be32 ipaddr;
+
+		ipaddr = get_unaligned((__be32 *)(arp_ptr + FWNET_ALEN));
+
+		arp1394->hw_addr_len    = RFC2734_HW_ADDR_LEN;
+		arp1394->max_rec        = dev->card->max_receive;
+		arp1394->sspd		= dev->card->link_speed;
+
+		put_unaligned_be16(dev->local_fifo >> 32,
+				   &arp1394->fifo_hi);
+		put_unaligned_be32(dev->local_fifo & 0xffffffff,
+				   &arp1394->fifo_lo);
+		put_unaligned(ipaddr, &arp1394->sip);
+	}
+
+	ptask->hdr.w0 = 0;
+	ptask->hdr.w1 = 0;
+	ptask->skb = skb;
+	ptask->dev = dev;
+
+	/* Does it all fit in one packet? */
+	if (dg_size <= max_payload) {
+		fwnet_make_uf_hdr(&ptask->hdr, ntohs(proto));
+		ptask->outstanding_pkts = 1;
+		max_payload = dg_size + RFC2374_UNFRAG_HDR_SIZE;
+	} else {
+		u16 datagram_label;
+
+		max_payload -= RFC2374_FRAG_OVERHEAD;
+		datagram_label = (*datagram_label_ptr)++;
+		fwnet_make_ff_hdr(&ptask->hdr, ntohs(proto), dg_size,
+				  datagram_label);
+		ptask->outstanding_pkts = DIV_ROUND_UP(dg_size, max_payload);
+		max_payload += RFC2374_FRAG_HDR_SIZE;
+	}
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	ptask->max_payload = max_payload;
+	fwnet_send_packet(ptask);
+
+	return NETDEV_TX_OK;
+
+ fail_unlock:
+	spin_unlock_irqrestore(&dev->lock, flags);
+ fail:
+	if (ptask)
+		kmem_cache_free(fwnet_packet_task_cache, ptask);
+
+	if (skb != NULL)
+		dev_kfree_skb(skb);
+
+	net->stats.tx_dropped++;
+	net->stats.tx_errors++;
+
+	/*
+	 * FIXME: According to a patch from 2003-02-26, "returning non-zero
+	 * causes serious problems" here, allegedly.  Before that patch,
+	 * -ERRNO was returned which is not appropriate under Linux 2.6.
+	 * Perhaps more needs to be done?  Stop the queue in serious
+	 * conditions and restart it elsewhere?
+	 */
+	return NETDEV_TX_OK;
+}
+
+static int fwnet_change_mtu(struct net_device *net, int new_mtu)
+{
+	if (new_mtu < 68)
+		return -EINVAL;
+
+	net->mtu = new_mtu;
+	return 0;
+}
+
+static void fwnet_get_drvinfo(struct net_device *net,
+			      struct ethtool_drvinfo *info)
+{
+	strcpy(info->driver, KBUILD_MODNAME);
+	strcpy(info->bus_info, "ieee1394");
+}
+
+static struct ethtool_ops fwnet_ethtool_ops = {
+	.get_drvinfo = fwnet_get_drvinfo,
+};
+
+static const struct net_device_ops fwnet_netdev_ops = {
+	.ndo_open       = fwnet_open,
+	.ndo_stop	= fwnet_stop,
+	.ndo_start_xmit = fwnet_tx,
+	.ndo_change_mtu = fwnet_change_mtu,
+};
+
+static void fwnet_init_dev(struct net_device *net)
+{
+	net->header_ops		= &fwnet_header_ops;
+	net->netdev_ops		= &fwnet_netdev_ops;
+	net->watchdog_timeo	= 2 * HZ;
+	net->flags		= IFF_BROADCAST | IFF_MULTICAST;
+	net->features		= NETIF_F_HIGHDMA;
+	net->addr_len		= FWNET_ALEN;
+	net->hard_header_len	= FWNET_HLEN;
+	net->type		= ARPHRD_IEEE1394;
+	net->tx_queue_len	= 10;
+	SET_ETHTOOL_OPS(net, &fwnet_ethtool_ops);
+}
+
+/* caller must hold fwnet_device_mutex */
+static struct fwnet_device *fwnet_dev_find(struct fw_card *card)
+{
+	struct fwnet_device *dev;
+
+	list_for_each_entry(dev, &fwnet_device_list, dev_link)
+		if (dev->card == card)
+			return dev;
+
+	return NULL;
+}
+
+static int fwnet_add_peer(struct fwnet_device *dev,
+			  struct fw_unit *unit, struct fw_device *device)
+{
+	struct fwnet_peer *peer;
+
+	peer = kmalloc(sizeof(*peer), GFP_KERNEL);
+	if (!peer)
+		return -ENOMEM;
+
+	dev_set_drvdata(&unit->device, peer);
+
+	peer->dev = dev;
+	peer->guid = (u64)device->config_rom[3] << 32 | device->config_rom[4];
+	peer->fifo = FWNET_NO_FIFO_ADDR;
+	INIT_LIST_HEAD(&peer->pd_list);
+	peer->pdg_size = 0;
+	peer->datagram_label = 0;
+	peer->speed = device->max_speed;
+	peer->max_payload = fwnet_max_payload(device->max_rec, peer->speed);
+
+	peer->generation = device->generation;
+	smp_rmb();
+	peer->node_id = device->node_id;
+
+	spin_lock_irq(&dev->lock);
+	list_add_tail(&peer->peer_link, &dev->peer_list);
+	spin_unlock_irq(&dev->lock);
+
+	return 0;
+}
+
+static int fwnet_probe(struct device *_dev)
+{
+	struct fw_unit *unit = fw_unit(_dev);
+	struct fw_device *device = fw_parent_device(unit);
+	struct fw_card *card = device->card;
+	struct net_device *net;
+	bool allocated_netdev = false;
+	struct fwnet_device *dev;
+	unsigned max_mtu;
+	int ret;
+
+	mutex_lock(&fwnet_device_mutex);
+
+	dev = fwnet_dev_find(card);
+	if (dev) {
+		net = dev->netdev;
+		goto have_dev;
+	}
+
+	net = alloc_netdev(sizeof(*dev), "firewire%d", fwnet_init_dev);
+	if (net == NULL) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	allocated_netdev = true;
+	SET_NETDEV_DEV(net, card->device);
+	dev = netdev_priv(net);
+
+	spin_lock_init(&dev->lock);
+	dev->broadcast_state = FWNET_BROADCAST_ERROR;
+	dev->broadcast_rcv_context = NULL;
+	dev->broadcast_xmt_max_payload = 0;
+	dev->broadcast_xmt_datagramlabel = 0;
+
+	dev->local_fifo = FWNET_NO_FIFO_ADDR;
+
+	INIT_LIST_HEAD(&dev->packet_list);
+	INIT_LIST_HEAD(&dev->broadcasted_list);
+	INIT_LIST_HEAD(&dev->sent_list);
+	INIT_LIST_HEAD(&dev->peer_list);
+
+	dev->card = card;
+	dev->netdev = net;
+
+	/*
+	 * Use the RFC 2734 default 1500 octets or the maximum payload
+	 * as initial MTU
+	 */
+	max_mtu = (1 << (card->max_receive + 1))
+		  - sizeof(struct rfc2734_header) - IEEE1394_GASP_HDR_SIZE;
+	net->mtu = min(1500U, max_mtu);
+
+	/* Set our hardware address while we're at it */
+	put_unaligned_be64(card->guid, net->dev_addr);
+	put_unaligned_be64(~0ULL, net->broadcast);
+	ret = register_netdev(net);
+	if (ret) {
+		fw_error("Cannot register the driver\n");
+		goto out;
+	}
+
+	list_add_tail(&dev->dev_link, &fwnet_device_list);
+	fw_notify("%s: IPv4 over FireWire on device %016llx\n",
+		  net->name, (unsigned long long)card->guid);
+ have_dev:
+	ret = fwnet_add_peer(dev, unit, device);
+	if (ret && allocated_netdev) {
+		unregister_netdev(net);
+		list_del(&dev->dev_link);
+	}
+ out:
+	if (ret && allocated_netdev)
+		free_netdev(net);
+
+	mutex_unlock(&fwnet_device_mutex);
+
+	return ret;
+}
+
+static void fwnet_remove_peer(struct fwnet_peer *peer)
+{
+	struct fwnet_partial_datagram *pd, *pd_next;
+
+	spin_lock_irq(&peer->dev->lock);
+	list_del(&peer->peer_link);
+	spin_unlock_irq(&peer->dev->lock);
+
+	list_for_each_entry_safe(pd, pd_next, &peer->pd_list, pd_link)
+		fwnet_pd_delete(pd);
+
+	kfree(peer);
+}
+
+static int fwnet_remove(struct device *_dev)
+{
+	struct fwnet_peer *peer = dev_get_drvdata(_dev);
+	struct fwnet_device *dev = peer->dev;
+	struct net_device *net;
+	struct fwnet_packet_task *ptask, *pt_next;
+
+	mutex_lock(&fwnet_device_mutex);
+
+	fwnet_remove_peer(peer);
+
+	if (list_empty(&dev->peer_list)) {
+		net = dev->netdev;
+		unregister_netdev(net);
+
+		if (dev->local_fifo != FWNET_NO_FIFO_ADDR)
+			fw_core_remove_address_handler(&dev->handler);
+		if (dev->broadcast_rcv_context) {
+			fw_iso_context_stop(dev->broadcast_rcv_context);
+			fw_iso_buffer_destroy(&dev->broadcast_rcv_buffer,
+					      dev->card);
+			fw_iso_context_destroy(dev->broadcast_rcv_context);
+		}
+		list_for_each_entry_safe(ptask, pt_next,
+					 &dev->packet_list, pt_link) {
+			dev_kfree_skb_any(ptask->skb);
+			kmem_cache_free(fwnet_packet_task_cache, ptask);
+		}
+		list_for_each_entry_safe(ptask, pt_next,
+					 &dev->broadcasted_list, pt_link) {
+			dev_kfree_skb_any(ptask->skb);
+			kmem_cache_free(fwnet_packet_task_cache, ptask);
+		}
+		list_for_each_entry_safe(ptask, pt_next,
+					 &dev->sent_list, pt_link) {
+			dev_kfree_skb_any(ptask->skb);
+			kmem_cache_free(fwnet_packet_task_cache, ptask);
+		}
+		list_del(&dev->dev_link);
+
+		free_netdev(net);
+	}
+
+	mutex_unlock(&fwnet_device_mutex);
+
+	return 0;
+}
+
+/*
+ * FIXME abort partially sent fragmented datagrams,
+ * discard partially received fragmented datagrams
+ */
+static void fwnet_update(struct fw_unit *unit)
+{
+	struct fw_device *device = fw_parent_device(unit);
+	struct fwnet_peer *peer = dev_get_drvdata(&unit->device);
+	int generation;
+
+	generation = device->generation;
+
+	spin_lock_irq(&peer->dev->lock);
+	peer->node_id    = device->node_id;
+	peer->generation = generation;
+	spin_unlock_irq(&peer->dev->lock);
+}
+
+static const struct ieee1394_device_id fwnet_id_table[] = {
+	{
+		.match_flags  = IEEE1394_MATCH_SPECIFIER_ID |
+				IEEE1394_MATCH_VERSION,
+		.specifier_id = IANA_SPECIFIER_ID,
+		.version      = RFC2734_SW_VERSION,
+	},
+	{ }
+};
+
+static struct fw_driver fwnet_driver = {
+	.driver = {
+		.owner  = THIS_MODULE,
+		.name   = "net",
+		.bus    = &fw_bus_type,
+		.probe  = fwnet_probe,
+		.remove = fwnet_remove,
+	},
+	.update   = fwnet_update,
+	.id_table = fwnet_id_table,
+};
+
+static const u32 rfc2374_unit_directory_data[] = {
+	0x00040000,	/* directory_length		*/
+	0x1200005e,	/* unit_specifier_id: IANA	*/
+	0x81000003,	/* textual descriptor offset	*/
+	0x13000001,	/* unit_sw_version: RFC 2734	*/
+	0x81000005,	/* textual descriptor offset	*/
+	0x00030000,	/* descriptor_length		*/
+	0x00000000,	/* text				*/
+	0x00000000,	/* minimal ASCII, en		*/
+	0x49414e41,	/* I A N A			*/
+	0x00030000,	/* descriptor_length		*/
+	0x00000000,	/* text				*/
+	0x00000000,	/* minimal ASCII, en		*/
+	0x49507634,	/* I P v 4			*/
+};
+
+static struct fw_descriptor rfc2374_unit_directory = {
+	.length = ARRAY_SIZE(rfc2374_unit_directory_data),
+	.key    = (CSR_DIRECTORY | CSR_UNIT) << 24,
+	.data   = rfc2374_unit_directory_data
+};
+
+static int __init fwnet_init(void)
+{
+	int err;
+
+	err = fw_core_add_descriptor(&rfc2374_unit_directory);
+	if (err)
+		return err;
+
+	fwnet_packet_task_cache = kmem_cache_create("packet_task",
+			sizeof(struct fwnet_packet_task), 0, 0, NULL);
+	if (!fwnet_packet_task_cache) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	err = driver_register(&fwnet_driver.driver);
+	if (!err)
+		return 0;
+
+	kmem_cache_destroy(fwnet_packet_task_cache);
+out:
+	fw_core_remove_descriptor(&rfc2374_unit_directory);
+
+	return err;
+}
+module_init(fwnet_init);
+
+static void __exit fwnet_cleanup(void)
+{
+	driver_unregister(&fwnet_driver.driver);
+	kmem_cache_destroy(fwnet_packet_task_cache);
+	fw_core_remove_descriptor(&rfc2374_unit_directory);
+}
+module_exit(fwnet_cleanup);
+
+MODULE_AUTHOR("Jay Fenlason <fenlason@redhat.com>");
+MODULE_DESCRIPTION("IPv4 over IEEE1394 as per RFC 2734");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(ieee1394, fwnet_id_table);
diff --git a/drivers/firmware/pcdp.c b/drivers/firmware/pcdp.c
index 58e9f8e457f..51e0e2d8fac 100644
--- a/drivers/firmware/pcdp.c
+++ b/drivers/firmware/pcdp.c
@@ -28,10 +28,10 @@ setup_serial_console(struct pcdp_uart *uart)
 	char parity;
 
 	mmio = (uart->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY);
-	p += sprintf(p, "uart8250,%s,0x%lx",
+	p += sprintf(p, "uart8250,%s,0x%llx",
 		mmio ? "mmio" : "io", uart->addr.address);
 	if (uart->baud) {
-		p += sprintf(p, ",%lu", uart->baud);
+		p += sprintf(p, ",%llu", uart->baud);
 		if (uart->bits) {
 			switch (uart->parity) {
 			    case 0x2: parity = 'e'; break;
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 11f373971fa..3582c39f972 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -67,6 +67,12 @@ config GPIO_SYSFS
 
 comment "Memory mapped GPIO expanders:"
 
+config GPIO_PL061
+	bool "PrimeCell PL061 GPIO support"
+	depends on ARM_AMBA
+	help
+	  Say yes here to support the PrimeCell PL061 GPIO device
+
 config GPIO_XILINX
 	bool "Xilinx GPIO support"
 	depends on PPC_OF || MICROBLAZE
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 49ac64e515e..ef90203e8f3 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_GPIO_MAX732X)	+= max732x.o
 obj-$(CONFIG_GPIO_MCP23S08)	+= mcp23s08.o
 obj-$(CONFIG_GPIO_PCA953X)	+= pca953x.o
 obj-$(CONFIG_GPIO_PCF857X)	+= pcf857x.o
+obj-$(CONFIG_GPIO_PL061)	+= pl061.o
 obj-$(CONFIG_GPIO_TWL4030)	+= twl4030-gpio.o
 obj-$(CONFIG_GPIO_XILINX)	+= xilinx_gpio.o
 obj-$(CONFIG_GPIO_BT8XX)	+= bt8xxgpio.o
diff --git a/drivers/gpio/max7301.c b/drivers/gpio/max7301.c
index 3e7f4e06386..7b82eaae262 100644
--- a/drivers/gpio/max7301.c
+++ b/drivers/gpio/max7301.c
@@ -287,7 +287,7 @@ exit_destroy:
 	return ret;
 }
 
-static int max7301_remove(struct spi_device *spi)
+static int __devexit max7301_remove(struct spi_device *spi)
 {
 	struct max7301 *ts;
 	int ret;
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index 8dc0164bd51..cdb6574d25a 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -15,6 +15,10 @@
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
+#ifdef CONFIG_OF_GPIO
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#endif
 
 #include <asm/gpio.h>
 
@@ -32,6 +36,7 @@ static const struct i2c_device_id pca953x_id[] = {
 	{ "pca9539", 16, },
 	{ "pca9554", 8, },
 	{ "pca9555", 16, },
+	{ "pca9556", 8, },
 	{ "pca9557", 8, },
 
 	{ "max7310", 8, },
@@ -49,7 +54,9 @@ struct pca953x_chip {
 	uint16_t reg_direction;
 
 	struct i2c_client *client;
+	struct pca953x_platform_data *dyn_pdata;
 	struct gpio_chip gpio_chip;
+	char **names;
 };
 
 static int pca953x_write_reg(struct pca953x_chip *chip, int reg, uint16_t val)
@@ -192,8 +199,57 @@ static void pca953x_setup_gpio(struct pca953x_chip *chip, int gpios)
 	gc->label = chip->client->name;
 	gc->dev = &chip->client->dev;
 	gc->owner = THIS_MODULE;
+	gc->names = chip->names;
 }
 
+/*
+ * Handlers for alternative sources of platform_data
+ */
+#ifdef CONFIG_OF_GPIO
+/*
+ * Translate OpenFirmware node properties into platform_data
+ */
+static struct pca953x_platform_data *
+pca953x_get_alt_pdata(struct i2c_client *client)
+{
+	struct pca953x_platform_data *pdata;
+	struct device_node *node;
+	const uint16_t *val;
+
+	node = dev_archdata_get_node(&client->dev.archdata);
+	if (node == NULL)
+		return NULL;
+
+	pdata = kzalloc(sizeof(struct pca953x_platform_data), GFP_KERNEL);
+	if (pdata == NULL) {
+		dev_err(&client->dev, "Unable to allocate platform_data\n");
+		return NULL;
+	}
+
+	pdata->gpio_base = -1;
+	val = of_get_property(node, "linux,gpio-base", NULL);
+	if (val) {
+		if (*val < 0)
+			dev_warn(&client->dev,
+				 "invalid gpio-base in device tree\n");
+		else
+			pdata->gpio_base = *val;
+	}
+
+	val = of_get_property(node, "polarity", NULL);
+	if (val)
+		pdata->invert = *val;
+
+	return pdata;
+}
+#else
+static struct pca953x_platform_data *
+pca953x_get_alt_pdata(struct i2c_client *client)
+{
+	return NULL;
+}
+#endif
+
 static int __devinit pca953x_probe(struct i2c_client *client,
 				   const struct i2c_device_id *id)
 {
@@ -201,20 +257,32 @@ static int __devinit pca953x_probe(struct i2c_client *client,
 	struct pca953x_chip *chip;
 	int ret;
 
+	chip = kzalloc(sizeof(struct pca953x_chip), GFP_KERNEL);
+	if (chip == NULL)
+		return -ENOMEM;
+
 	pdata = client->dev.platform_data;
 	if (pdata == NULL) {
-		dev_dbg(&client->dev, "no platform data\n");
-		return -EINVAL;
+		pdata = pca953x_get_alt_pdata(client);
+		/*
+		 * Unlike normal platform_data, this is allocated
+		 * dynamically and must be freed in the driver
+		 */
+		chip->dyn_pdata = pdata;
 	}
 
-	chip = kzalloc(sizeof(struct pca953x_chip), GFP_KERNEL);
-	if (chip == NULL)
-		return -ENOMEM;
+	if (pdata == NULL) {
+		dev_dbg(&client->dev, "no platform data\n");
+		ret = -EINVAL;
+		goto out_failed;
+	}
 
 	chip->client = client;
 
 	chip->gpio_start = pdata->gpio_base;
 
+	chip->names = pdata->names;
+
 	/* initialize cached registers from their original values.
 	 * we can't share this chip with another i2c master.
 	 */
@@ -249,6 +317,7 @@ static int __devinit pca953x_probe(struct i2c_client *client,
 	return 0;
 
 out_failed:
+	kfree(chip->dyn_pdata);
 	kfree(chip);
 	return ret;
 }
@@ -276,6 +345,7 @@ static int pca953x_remove(struct i2c_client *client)
 		return ret;
 	}
 
+	kfree(chip->dyn_pdata);
 	kfree(chip);
 	return 0;
 }
diff --git a/drivers/gpio/pl061.c b/drivers/gpio/pl061.c
new file mode 100644
index 00000000000..aa8e7cb020d
--- /dev/null
+++ b/drivers/gpio/pl061.c
@@ -0,0 +1,341 @@
+/*
+ *  linux/drivers/gpio/pl061.c
+ *
+ *  Copyright (C) 2008, 2009 Provigent Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Driver for the ARM PrimeCell(tm) General Purpose Input/Output (PL061)
+ *
+ * Data sheet: ARM DDI 0190B, September 2000
+ */
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/bitops.h>
+#include <linux/workqueue.h>
+#include <linux/gpio.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
+
+#define GPIODIR 0x400
+#define GPIOIS  0x404
+#define GPIOIBE 0x408
+#define GPIOIEV 0x40C
+#define GPIOIE  0x410
+#define GPIORIS 0x414
+#define GPIOMIS 0x418
+#define GPIOIC  0x41C
+
+#define PL061_GPIO_NR	8
+
+struct pl061_gpio {
+	/* We use a list of pl061_gpio structs for each trigger IRQ in the main
+	 * interrupts controller of the system. We need this to support systems
+	 * in which more that one PL061s are connected to the same IRQ. The ISR
+	 * interates through this list to find the source of the interrupt.
+	 */
+	struct list_head	list;
+
+	/* Each of the two spinlocks protects a different set of hardware
+	 * regiters and data structurs. This decouples the code of the IRQ from
+	 * the GPIO code. This also makes the case of a GPIO routine call from
+	 * the IRQ code simpler.
+	 */
+	spinlock_t		lock;		/* GPIO registers */
+	spinlock_t		irq_lock;	/* IRQ registers */
+
+	void __iomem		*base;
+	unsigned		irq_base;
+	struct gpio_chip	gc;
+};
+
+static int pl061_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+	struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc);
+	unsigned long flags;
+	unsigned char gpiodir;
+
+	if (offset >= gc->ngpio)
+		return -EINVAL;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	gpiodir = readb(chip->base + GPIODIR);
+	gpiodir &= ~(1 << offset);
+	writeb(gpiodir, chip->base + GPIODIR);
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	return 0;
+}
+
+static int pl061_direction_output(struct gpio_chip *gc, unsigned offset,
+		int value)
+{
+	struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc);
+	unsigned long flags;
+	unsigned char gpiodir;
+
+	if (offset >= gc->ngpio)
+		return -EINVAL;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	writeb(!!value << offset, chip->base + (1 << (offset + 2)));
+	gpiodir = readb(chip->base + GPIODIR);
+	gpiodir |= 1 << offset;
+	writeb(gpiodir, chip->base + GPIODIR);
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	return 0;
+}
+
+static int pl061_get_value(struct gpio_chip *gc, unsigned offset)
+{
+	struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc);
+
+	return !!readb(chip->base + (1 << (offset + 2)));
+}
+
+static void pl061_set_value(struct gpio_chip *gc, unsigned offset, int value)
+{
+	struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc);
+
+	writeb(!!value << offset, chip->base + (1 << (offset + 2)));
+}
+
+/*
+ * PL061 GPIO IRQ
+ */
+static void pl061_irq_disable(unsigned irq)
+{
+	struct pl061_gpio *chip = get_irq_chip_data(irq);
+	int offset = irq - chip->irq_base;
+	unsigned long flags;
+	u8 gpioie;
+
+	spin_lock_irqsave(&chip->irq_lock, flags);
+	gpioie = readb(chip->base + GPIOIE);
+	gpioie &= ~(1 << offset);
+	writeb(gpioie, chip->base + GPIOIE);
+	spin_unlock_irqrestore(&chip->irq_lock, flags);
+}
+
+static void pl061_irq_enable(unsigned irq)
+{
+	struct pl061_gpio *chip = get_irq_chip_data(irq);
+	int offset = irq - chip->irq_base;
+	unsigned long flags;
+	u8 gpioie;
+
+	spin_lock_irqsave(&chip->irq_lock, flags);
+	gpioie = readb(chip->base + GPIOIE);
+	gpioie |= 1 << offset;
+	writeb(gpioie, chip->base + GPIOIE);
+	spin_unlock_irqrestore(&chip->irq_lock, flags);
+}
+
+static int pl061_irq_type(unsigned irq, unsigned trigger)
+{
+	struct pl061_gpio *chip = get_irq_chip_data(irq);
+	int offset = irq - chip->irq_base;
+	unsigned long flags;
+	u8 gpiois, gpioibe, gpioiev;
+
+	if (offset < 0 || offset > PL061_GPIO_NR)
+		return -EINVAL;
+
+	spin_lock_irqsave(&chip->irq_lock, flags);
+
+	gpioiev = readb(chip->base + GPIOIEV);
+
+	gpiois = readb(chip->base + GPIOIS);
+	if (trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
+		gpiois |= 1 << offset;
+		if (trigger & IRQ_TYPE_LEVEL_HIGH)
+			gpioiev |= 1 << offset;
+		else
+			gpioiev &= ~(1 << offset);
+	} else
+		gpiois &= ~(1 << offset);
+	writeb(gpiois, chip->base + GPIOIS);
+
+	gpioibe = readb(chip->base + GPIOIBE);
+	if ((trigger & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH)
+		gpioibe |= 1 << offset;
+	else {
+		gpioibe &= ~(1 << offset);
+		if (trigger & IRQ_TYPE_EDGE_RISING)
+			gpioiev |= 1 << offset;
+		else
+			gpioiev &= ~(1 << offset);
+	}
+	writeb(gpioibe, chip->base + GPIOIBE);
+
+	writeb(gpioiev, chip->base + GPIOIEV);
+
+	spin_unlock_irqrestore(&chip->irq_lock, flags);
+
+	return 0;
+}
+
+static struct irq_chip pl061_irqchip = {
+	.name		= "GPIO",
+	.enable		= pl061_irq_enable,
+	.disable	= pl061_irq_disable,
+	.set_type	= pl061_irq_type,
+};
+
+static void pl061_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+	struct list_head *chip_list = get_irq_chip_data(irq);
+	struct list_head *ptr;
+	struct pl061_gpio *chip;
+
+	desc->chip->ack(irq);
+	list_for_each(ptr, chip_list) {
+		unsigned long pending;
+		int gpio;
+
+		chip = list_entry(ptr, struct pl061_gpio, list);
+		pending = readb(chip->base + GPIOMIS);
+		writeb(pending, chip->base + GPIOIC);
+
+		if (pending == 0)
+			continue;
+
+		for_each_bit(gpio, &pending, PL061_GPIO_NR)
+			generic_handle_irq(gpio_to_irq(gpio));
+	}
+	desc->chip->unmask(irq);
+}
+
+static int __init pl061_probe(struct amba_device *dev, struct amba_id *id)
+{
+	struct pl061_platform_data *pdata;
+	struct pl061_gpio *chip;
+	struct list_head *chip_list;
+	int ret, irq, i;
+	static unsigned long init_irq[BITS_TO_LONGS(NR_IRQS)];
+
+	pdata = dev->dev.platform_data;
+	if (pdata == NULL)
+		return -ENODEV;
+
+	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+	if (chip == NULL)
+		return -ENOMEM;
+
+	if (!request_mem_region(dev->res.start,
+				resource_size(&dev->res), "pl061")) {
+		ret = -EBUSY;
+		goto free_mem;
+	}
+
+	chip->base = ioremap(dev->res.start, resource_size(&dev->res));
+	if (chip->base == NULL) {
+		ret = -ENOMEM;
+		goto release_region;
+	}
+
+	spin_lock_init(&chip->lock);
+	spin_lock_init(&chip->irq_lock);
+	INIT_LIST_HEAD(&chip->list);
+
+	chip->gc.direction_input = pl061_direction_input;
+	chip->gc.direction_output = pl061_direction_output;
+	chip->gc.get = pl061_get_value;
+	chip->gc.set = pl061_set_value;
+	chip->gc.base = pdata->gpio_base;
+	chip->gc.ngpio = PL061_GPIO_NR;
+	chip->gc.label = dev_name(&dev->dev);
+	chip->gc.dev = &dev->dev;
+	chip->gc.owner = THIS_MODULE;
+
+	chip->irq_base = pdata->irq_base;
+
+	ret = gpiochip_add(&chip->gc);
+	if (ret)
+		goto iounmap;
+
+	/*
+	 * irq_chip support
+	 */
+
+	if (chip->irq_base == (unsigned) -1)
+		return 0;
+
+	writeb(0, chip->base + GPIOIE); /* disable irqs */
+	irq = dev->irq[0];
+	if (irq < 0) {
+		ret = -ENODEV;
+		goto iounmap;
+	}
+	set_irq_chained_handler(irq, pl061_irq_handler);
+	if (!test_and_set_bit(irq, init_irq)) { /* list initialized? */
+		chip_list = kmalloc(sizeof(*chip_list), GFP_KERNEL);
+		if (chip_list == NULL) {
+			ret = -ENOMEM;
+			goto iounmap;
+		}
+		INIT_LIST_HEAD(chip_list);
+		set_irq_chip_data(irq, chip_list);
+	} else
+		chip_list = get_irq_chip_data(irq);
+	list_add(&chip->list, chip_list);
+
+	for (i = 0; i < PL061_GPIO_NR; i++) {
+		if (pdata->directions & (1 << i))
+			pl061_direction_output(&chip->gc, i,
+					pdata->values & (1 << i));
+		else
+			pl061_direction_input(&chip->gc, i);
+
+		set_irq_chip(i+chip->irq_base, &pl061_irqchip);
+		set_irq_handler(i+chip->irq_base, handle_simple_irq);
+		set_irq_flags(i+chip->irq_base, IRQF_VALID);
+		set_irq_chip_data(i+chip->irq_base, chip);
+	}
+
+	return 0;
+
+iounmap:
+	iounmap(chip->base);
+release_region:
+	release_mem_region(dev->res.start, resource_size(&dev->res));
+free_mem:
+	kfree(chip);
+
+	return ret;
+}
+
+static struct amba_id pl061_ids[] __initdata = {
+	{
+		.id	= 0x00041061,
+		.mask	= 0x000fffff,
+	},
+	{ 0, 0 },
+};
+
+static struct amba_driver pl061_gpio_driver = {
+	.drv = {
+		.name	= "pl061_gpio",
+	},
+	.id_table	= pl061_ids,
+	.probe		= pl061_probe,
+};
+
+static int __init pl061_gpio_init(void)
+{
+	return amba_driver_register(&pl061_gpio_driver);
+}
+subsys_initcall(pl061_gpio_init);
+
+MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
+MODULE_DESCRIPTION("PL061 GPIO driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/drm_agpsupport.c b/drivers/gpu/drm/drm_agpsupport.c
index 14796594e5d..d68888fe3df 100644
--- a/drivers/gpu/drm/drm_agpsupport.c
+++ b/drivers/gpu/drm/drm_agpsupport.c
@@ -203,7 +203,7 @@ int drm_agp_alloc(struct drm_device *dev, struct drm_agp_buffer *request)
 
 	if (!dev->agp || !dev->agp->acquired)
 		return -EINVAL;
-	if (!(entry = drm_alloc(sizeof(*entry), DRM_MEM_AGPLISTS)))
+	if (!(entry = kmalloc(sizeof(*entry), GFP_KERNEL)))
 		return -ENOMEM;
 
 	memset(entry, 0, sizeof(*entry));
@@ -211,7 +211,7 @@ int drm_agp_alloc(struct drm_device *dev, struct drm_agp_buffer *request)
 	pages = (request->size + PAGE_SIZE - 1) / PAGE_SIZE;
 	type = (u32) request->type;
 	if (!(memory = drm_alloc_agp(dev, pages, type))) {
-		drm_free(entry, sizeof(*entry), DRM_MEM_AGPLISTS);
+		kfree(entry);
 		return -ENOMEM;
 	}
 
@@ -369,7 +369,7 @@ int drm_agp_free(struct drm_device *dev, struct drm_agp_buffer *request)
 	list_del(&entry->head);
 
 	drm_free_agp(entry->memory, entry->pages);
-	drm_free(entry, sizeof(*entry), DRM_MEM_AGPLISTS);
+	kfree(entry);
 	return 0;
 }
 EXPORT_SYMBOL(drm_agp_free);
@@ -397,13 +397,13 @@ struct drm_agp_head *drm_agp_init(struct drm_device *dev)
 {
 	struct drm_agp_head *head = NULL;
 
-	if (!(head = drm_alloc(sizeof(*head), DRM_MEM_AGPLISTS)))
+	if (!(head = kmalloc(sizeof(*head), GFP_KERNEL)))
 		return NULL;
 	memset((void *)head, 0, sizeof(*head));
 	head->bridge = agp_find_bridge(dev->pdev);
 	if (!head->bridge) {
 		if (!(head->bridge = agp_backend_acquire(dev->pdev))) {
-			drm_free(head, sizeof(*head), DRM_MEM_AGPLISTS);
+			kfree(head);
 			return NULL;
 		}
 		agp_copy_info(head->bridge, &head->agp_info);
@@ -412,7 +412,7 @@ struct drm_agp_head *drm_agp_init(struct drm_device *dev)
 		agp_copy_info(head->bridge, &head->agp_info);
 	}
 	if (head->agp_info.chipset == NOT_SUPPORTED) {
-		drm_free(head, sizeof(*head), DRM_MEM_AGPLISTS);
+		kfree(head);
 		return NULL;
 	}
 	INIT_LIST_HEAD(&head->memory);
@@ -482,7 +482,7 @@ drm_agp_bind_pages(struct drm_device *dev,
 	}
 
 	for (i = 0; i < num_pages; i++)
-		mem->memory[i] = phys_to_gart(page_to_phys(pages[i]));
+		mem->pages[i] = pages[i];
 	mem->page_count = num_pages;
 
 	mem->is_flushed = true;
diff --git a/drivers/gpu/drm/drm_auth.c b/drivers/gpu/drm/drm_auth.c
index ca7a9ef5007..932b5aa96a6 100644
--- a/drivers/gpu/drm/drm_auth.c
+++ b/drivers/gpu/drm/drm_auth.c
@@ -79,7 +79,7 @@ static int drm_add_magic(struct drm_master *master, struct drm_file *priv,
 	struct drm_device *dev = master->minor->dev;
 	DRM_DEBUG("%d\n", magic);
 
-	entry = drm_alloc(sizeof(*entry), DRM_MEM_MAGIC);
+	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
 	if (!entry)
 		return -ENOMEM;
 	memset(entry, 0, sizeof(*entry));
@@ -120,7 +120,7 @@ static int drm_remove_magic(struct drm_master *master, drm_magic_t magic)
 	list_del(&pt->head);
 	mutex_unlock(&dev->struct_mutex);
 
-	drm_free(pt, sizeof(*pt), DRM_MEM_MAGIC);
+	kfree(pt);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c
index 80a257554b3..6246e3f3dad 100644
--- a/drivers/gpu/drm/drm_bufs.c
+++ b/drivers/gpu/drm/drm_bufs.c
@@ -151,7 +151,7 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset,
 	unsigned long user_token;
 	int ret;
 
-	map = drm_alloc(sizeof(*map), DRM_MEM_MAPS);
+	map = kmalloc(sizeof(*map), GFP_KERNEL);
 	if (!map)
 		return -ENOMEM;
 
@@ -165,7 +165,7 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset,
 	 * when processes fork.
 	 */
 	if ((map->flags & _DRM_REMOVABLE) && map->type != _DRM_SHM) {
-		drm_free(map, sizeof(*map), DRM_MEM_MAPS);
+		kfree(map);
 		return -EINVAL;
 	}
 	DRM_DEBUG("offset = 0x%08llx, size = 0x%08lx, type = %d\n",
@@ -179,7 +179,7 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset,
 		map->size = PAGE_ALIGN(map->size);
 
 	if ((map->offset & (~(resource_size_t)PAGE_MASK)) || (map->size & (~PAGE_MASK))) {
-		drm_free(map, sizeof(*map), DRM_MEM_MAPS);
+		kfree(map);
 		return -EINVAL;
 	}
 	map->mtrr = -1;
@@ -191,7 +191,7 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset,
 #if !defined(__sparc__) && !defined(__alpha__) && !defined(__ia64__) && !defined(__powerpc64__) && !defined(__x86_64__)
 		if (map->offset + (map->size-1) < map->offset ||
 		    map->offset < virt_to_phys(high_memory)) {
-			drm_free(map, sizeof(*map), DRM_MEM_MAPS);
+			kfree(map);
 			return -EINVAL;
 		}
 #endif
@@ -212,7 +212,7 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset,
 				list->map->size = map->size;
 			}
 
-			drm_free(map, sizeof(*map), DRM_MEM_MAPS);
+			kfree(map);
 			*maplist = list;
 			return 0;
 		}
@@ -227,7 +227,7 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset,
 		if (map->type == _DRM_REGISTERS) {
 			map->handle = ioremap(map->offset, map->size);
 			if (!map->handle) {
-				drm_free(map, sizeof(*map), DRM_MEM_MAPS);
+				kfree(map);
 				return -ENOMEM;
 			}
 		}
@@ -243,7 +243,7 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset,
 				list->map->size = map->size;
 			}
 
-			drm_free(map, sizeof(*map), DRM_MEM_MAPS);
+			kfree(map);
 			*maplist = list;
 			return 0;
 		}
@@ -251,7 +251,7 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset,
 		DRM_DEBUG("%lu %d %p\n",
 			  map->size, drm_order(map->size), map->handle);
 		if (!map->handle) {
-			drm_free(map, sizeof(*map), DRM_MEM_MAPS);
+			kfree(map);
 			return -ENOMEM;
 		}
 		map->offset = (unsigned long)map->handle;
@@ -259,7 +259,7 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset,
 			/* Prevent a 2nd X Server from creating a 2nd lock */
 			if (dev->primary->master->lock.hw_lock != NULL) {
 				vfree(map->handle);
-				drm_free(map, sizeof(*map), DRM_MEM_MAPS);
+				kfree(map);
 				return -EBUSY;
 			}
 			dev->sigdata.lock = dev->primary->master->lock.hw_lock = map->handle;	/* Pointer to lock */
@@ -270,7 +270,7 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset,
 		int valid = 0;
 
 		if (!drm_core_has_AGP(dev)) {
-			drm_free(map, sizeof(*map), DRM_MEM_MAPS);
+			kfree(map);
 			return -EINVAL;
 		}
 #ifdef __alpha__
@@ -303,7 +303,7 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset,
 			}
 		}
 		if (!list_empty(&dev->agp->memory) && !valid) {
-			drm_free(map, sizeof(*map), DRM_MEM_MAPS);
+			kfree(map);
 			return -EPERM;
 		}
 		DRM_DEBUG("AGP offset = 0x%08llx, size = 0x%08lx\n",
@@ -316,7 +316,7 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset,
 	}
 	case _DRM_SCATTER_GATHER:
 		if (!dev->sg) {
-			drm_free(map, sizeof(*map), DRM_MEM_MAPS);
+			kfree(map);
 			return -EINVAL;
 		}
 		map->offset += (unsigned long)dev->sg->virtual;
@@ -328,7 +328,7 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset,
 		 * need to point to a 64bit variable first. */
 		dmah = drm_pci_alloc(dev, map->size, map->size, 0xffffffffUL);
 		if (!dmah) {
-			drm_free(map, sizeof(*map), DRM_MEM_MAPS);
+			kfree(map);
 			return -ENOMEM;
 		}
 		map->handle = dmah->vaddr;
@@ -336,15 +336,15 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset,
 		kfree(dmah);
 		break;
 	default:
-		drm_free(map, sizeof(*map), DRM_MEM_MAPS);
+		kfree(map);
 		return -EINVAL;
 	}
 
-	list = drm_alloc(sizeof(*list), DRM_MEM_MAPS);
+	list = kmalloc(sizeof(*list), GFP_KERNEL);
 	if (!list) {
 		if (map->type == _DRM_REGISTERS)
 			iounmap(map->handle);
-		drm_free(map, sizeof(*map), DRM_MEM_MAPS);
+		kfree(map);
 		return -EINVAL;
 	}
 	memset(list, 0, sizeof(*list));
@@ -362,8 +362,8 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset,
 	if (ret) {
 		if (map->type == _DRM_REGISTERS)
 			iounmap(map->handle);
-		drm_free(map, sizeof(*map), DRM_MEM_MAPS);
-		drm_free(list, sizeof(*list), DRM_MEM_MAPS);
+		kfree(map);
+		kfree(list);
 		mutex_unlock(&dev->struct_mutex);
 		return ret;
 	}
@@ -448,7 +448,7 @@ int drm_rmmap_locked(struct drm_device *dev, struct drm_local_map *map)
 			list_del(&r_list->head);
 			drm_ht_remove_key(&dev->map_hash,
 					  r_list->user_token >> PAGE_SHIFT);
-			drm_free(r_list, sizeof(*r_list), DRM_MEM_MAPS);
+			kfree(r_list);
 			found = 1;
 			break;
 		}
@@ -491,7 +491,7 @@ int drm_rmmap_locked(struct drm_device *dev, struct drm_local_map *map)
 		DRM_ERROR("tried to rmmap GEM object\n");
 		break;
 	}
-	drm_free(map, sizeof(*map), DRM_MEM_MAPS);
+	kfree(map);
 
 	return 0;
 }
@@ -582,24 +582,16 @@ static void drm_cleanup_buf_error(struct drm_device * dev,
 				drm_pci_free(dev, entry->seglist[i]);
 			}
 		}
-		drm_free(entry->seglist,
-			 entry->seg_count *
-			 sizeof(*entry->seglist), DRM_MEM_SEGS);
+		kfree(entry->seglist);
 
 		entry->seg_count = 0;
 	}
 
 	if (entry->buf_count) {
 		for (i = 0; i < entry->buf_count; i++) {
-			if (entry->buflist[i].dev_private) {
-				drm_free(entry->buflist[i].dev_private,
-					 entry->buflist[i].dev_priv_size,
-					 DRM_MEM_BUFS);
-			}
+			kfree(entry->buflist[i].dev_private);
 		}
-		drm_free(entry->buflist,
-			 entry->buf_count *
-			 sizeof(*entry->buflist), DRM_MEM_BUFS);
+		kfree(entry->buflist);
 
 		entry->buf_count = 0;
 	}
@@ -698,8 +690,7 @@ int drm_addbufs_agp(struct drm_device * dev, struct drm_buf_desc * request)
 		return -EINVAL;
 	}
 
-	entry->buflist = drm_alloc(count * sizeof(*entry->buflist),
-				   DRM_MEM_BUFS);
+	entry->buflist = kmalloc(count * sizeof(*entry->buflist), GFP_KERNEL);
 	if (!entry->buflist) {
 		mutex_unlock(&dev->struct_mutex);
 		atomic_dec(&dev->buf_alloc);
@@ -729,7 +720,7 @@ int drm_addbufs_agp(struct drm_device * dev, struct drm_buf_desc * request)
 		buf->file_priv = NULL;
 
 		buf->dev_priv_size = dev->driver->dev_priv_size;
-		buf->dev_private = drm_alloc(buf->dev_priv_size, DRM_MEM_BUFS);
+		buf->dev_private = kmalloc(buf->dev_priv_size, GFP_KERNEL);
 		if (!buf->dev_private) {
 			/* Set count correctly so we free the proper amount. */
 			entry->buf_count = count;
@@ -749,10 +740,9 @@ int drm_addbufs_agp(struct drm_device * dev, struct drm_buf_desc * request)
 
 	DRM_DEBUG("byte_count: %d\n", byte_count);
 
-	temp_buflist = drm_realloc(dma->buflist,
-				   dma->buf_count * sizeof(*dma->buflist),
-				   (dma->buf_count + entry->buf_count)
-				   * sizeof(*dma->buflist), DRM_MEM_BUFS);
+	temp_buflist = krealloc(dma->buflist,
+				(dma->buf_count + entry->buf_count) *
+				sizeof(*dma->buflist), GFP_KERNEL);
 	if (!temp_buflist) {
 		/* Free the entry because it isn't valid */
 		drm_cleanup_buf_error(dev, entry);
@@ -854,8 +844,7 @@ int drm_addbufs_pci(struct drm_device * dev, struct drm_buf_desc * request)
 		return -EINVAL;
 	}
 
-	entry->buflist = drm_alloc(count * sizeof(*entry->buflist),
-				   DRM_MEM_BUFS);
+	entry->buflist = kmalloc(count * sizeof(*entry->buflist), GFP_KERNEL);
 	if (!entry->buflist) {
 		mutex_unlock(&dev->struct_mutex);
 		atomic_dec(&dev->buf_alloc);
@@ -863,11 +852,9 @@ int drm_addbufs_pci(struct drm_device * dev, struct drm_buf_desc * request)
 	}
 	memset(entry->buflist, 0, count * sizeof(*entry->buflist));
 
-	entry->seglist = drm_alloc(count * sizeof(*entry->seglist),
-				   DRM_MEM_SEGS);
+	entry->seglist = kmalloc(count * sizeof(*entry->seglist), GFP_KERNEL);
 	if (!entry->seglist) {
-		drm_free(entry->buflist,
-			 count * sizeof(*entry->buflist), DRM_MEM_BUFS);
+		kfree(entry->buflist);
 		mutex_unlock(&dev->struct_mutex);
 		atomic_dec(&dev->buf_alloc);
 		return -ENOMEM;
@@ -877,13 +864,11 @@ int drm_addbufs_pci(struct drm_device * dev, struct drm_buf_desc * request)
 	/* Keep the original pagelist until we know all the allocations
 	 * have succeeded
 	 */
-	temp_pagelist = drm_alloc((dma->page_count + (count << page_order))
-				  * sizeof(*dma->pagelist), DRM_MEM_PAGES);
+	temp_pagelist = kmalloc((dma->page_count + (count << page_order)) *
+			       sizeof(*dma->pagelist), GFP_KERNEL);
 	if (!temp_pagelist) {
-		drm_free(entry->buflist,
-			 count * sizeof(*entry->buflist), DRM_MEM_BUFS);
-		drm_free(entry->seglist,
-			 count * sizeof(*entry->seglist), DRM_MEM_SEGS);
+		kfree(entry->buflist);
+		kfree(entry->seglist);
 		mutex_unlock(&dev->struct_mutex);
 		atomic_dec(&dev->buf_alloc);
 		return -ENOMEM;
@@ -907,9 +892,7 @@ int drm_addbufs_pci(struct drm_device * dev, struct drm_buf_desc * request)
 			entry->buf_count = count;
 			entry->seg_count = count;
 			drm_cleanup_buf_error(dev, entry);
-			drm_free(temp_pagelist,
-				 (dma->page_count + (count << page_order))
-				 * sizeof(*dma->pagelist), DRM_MEM_PAGES);
+			kfree(temp_pagelist);
 			mutex_unlock(&dev->struct_mutex);
 			atomic_dec(&dev->buf_alloc);
 			return -ENOMEM;
@@ -940,18 +923,14 @@ int drm_addbufs_pci(struct drm_device * dev, struct drm_buf_desc * request)
 			buf->file_priv = NULL;
 
 			buf->dev_priv_size = dev->driver->dev_priv_size;
-			buf->dev_private = drm_alloc(buf->dev_priv_size,
-						     DRM_MEM_BUFS);
+			buf->dev_private = kmalloc(buf->dev_priv_size,
+						  GFP_KERNEL);
 			if (!buf->dev_private) {
 				/* Set count correctly so we free the proper amount. */
 				entry->buf_count = count;
 				entry->seg_count = count;
 				drm_cleanup_buf_error(dev, entry);
-				drm_free(temp_pagelist,
-					 (dma->page_count +
-					  (count << page_order))
-					 * sizeof(*dma->pagelist),
-					 DRM_MEM_PAGES);
+				kfree(temp_pagelist);
 				mutex_unlock(&dev->struct_mutex);
 				atomic_dec(&dev->buf_alloc);
 				return -ENOMEM;
@@ -964,16 +943,13 @@ int drm_addbufs_pci(struct drm_device * dev, struct drm_buf_desc * request)
 		byte_count += PAGE_SIZE << page_order;
 	}
 
-	temp_buflist = drm_realloc(dma->buflist,
-				   dma->buf_count * sizeof(*dma->buflist),
-				   (dma->buf_count + entry->buf_count)
-				   * sizeof(*dma->buflist), DRM_MEM_BUFS);
+	temp_buflist = krealloc(dma->buflist,
+				(dma->buf_count + entry->buf_count) *
+				sizeof(*dma->buflist), GFP_KERNEL);
 	if (!temp_buflist) {
 		/* Free the entry because it isn't valid */
 		drm_cleanup_buf_error(dev, entry);
-		drm_free(temp_pagelist,
-			 (dma->page_count + (count << page_order))
-			 * sizeof(*dma->pagelist), DRM_MEM_PAGES);
+		kfree(temp_pagelist);
 		mutex_unlock(&dev->struct_mutex);
 		atomic_dec(&dev->buf_alloc);
 		return -ENOMEM;
@@ -988,9 +964,7 @@ int drm_addbufs_pci(struct drm_device * dev, struct drm_buf_desc * request)
 	 * with the new one.
 	 */
 	if (dma->page_count) {
-		drm_free(dma->pagelist,
-			 dma->page_count * sizeof(*dma->pagelist),
-			 DRM_MEM_PAGES);
+		kfree(dma->pagelist);
 	}
 	dma->pagelist = temp_pagelist;
 
@@ -1086,8 +1060,8 @@ static int drm_addbufs_sg(struct drm_device * dev, struct drm_buf_desc * request
 		return -EINVAL;
 	}
 
-	entry->buflist = drm_alloc(count * sizeof(*entry->buflist),
-				   DRM_MEM_BUFS);
+	entry->buflist = kmalloc(count * sizeof(*entry->buflist),
+				GFP_KERNEL);
 	if (!entry->buflist) {
 		mutex_unlock(&dev->struct_mutex);
 		atomic_dec(&dev->buf_alloc);
@@ -1118,7 +1092,7 @@ static int drm_addbufs_sg(struct drm_device * dev, struct drm_buf_desc * request
 		buf->file_priv = NULL;
 
 		buf->dev_priv_size = dev->driver->dev_priv_size;
-		buf->dev_private = drm_alloc(buf->dev_priv_size, DRM_MEM_BUFS);
+		buf->dev_private = kmalloc(buf->dev_priv_size, GFP_KERNEL);
 		if (!buf->dev_private) {
 			/* Set count correctly so we free the proper amount. */
 			entry->buf_count = count;
@@ -1139,10 +1113,9 @@ static int drm_addbufs_sg(struct drm_device * dev, struct drm_buf_desc * request
 
 	DRM_DEBUG("byte_count: %d\n", byte_count);
 
-	temp_buflist = drm_realloc(dma->buflist,
-				   dma->buf_count * sizeof(*dma->buflist),
-				   (dma->buf_count + entry->buf_count)
-				   * sizeof(*dma->buflist), DRM_MEM_BUFS);
+	temp_buflist = krealloc(dma->buflist,
+				(dma->buf_count + entry->buf_count) *
+				sizeof(*dma->buflist), GFP_KERNEL);
 	if (!temp_buflist) {
 		/* Free the entry because it isn't valid */
 		drm_cleanup_buf_error(dev, entry);
@@ -1248,8 +1221,8 @@ static int drm_addbufs_fb(struct drm_device * dev, struct drm_buf_desc * request
 		return -EINVAL;
 	}
 
-	entry->buflist = drm_alloc(count * sizeof(*entry->buflist),
-				   DRM_MEM_BUFS);
+	entry->buflist = kmalloc(count * sizeof(*entry->buflist),
+				GFP_KERNEL);
 	if (!entry->buflist) {
 		mutex_unlock(&dev->struct_mutex);
 		atomic_dec(&dev->buf_alloc);
@@ -1279,7 +1252,7 @@ static int drm_addbufs_fb(struct drm_device * dev, struct drm_buf_desc * request
 		buf->file_priv = NULL;
 
 		buf->dev_priv_size = dev->driver->dev_priv_size;
-		buf->dev_private = drm_alloc(buf->dev_priv_size, DRM_MEM_BUFS);
+		buf->dev_private = kmalloc(buf->dev_priv_size, GFP_KERNEL);
 		if (!buf->dev_private) {
 			/* Set count correctly so we free the proper amount. */
 			entry->buf_count = count;
@@ -1299,10 +1272,9 @@ static int drm_addbufs_fb(struct drm_device * dev, struct drm_buf_desc * request
 
 	DRM_DEBUG("byte_count: %d\n", byte_count);
 
-	temp_buflist = drm_realloc(dma->buflist,
-				   dma->buf_count * sizeof(*dma->buflist),
-				   (dma->buf_count + entry->buf_count)
-				   * sizeof(*dma->buflist), DRM_MEM_BUFS);
+	temp_buflist = krealloc(dma->buflist,
+				(dma->buf_count + entry->buf_count) *
+				sizeof(*dma->buflist), GFP_KERNEL);
 	if (!temp_buflist) {
 		/* Free the entry because it isn't valid */
 		drm_cleanup_buf_error(dev, entry);
diff --git a/drivers/gpu/drm/drm_context.c b/drivers/gpu/drm/drm_context.c
index 7d1e53c10d4..2607753a320 100644
--- a/drivers/gpu/drm/drm_context.c
+++ b/drivers/gpu/drm/drm_context.c
@@ -341,7 +341,7 @@ int drm_addctx(struct drm_device *dev, void *data,
 			}
 	}
 
-	ctx_entry = drm_alloc(sizeof(*ctx_entry), DRM_MEM_CTXLIST);
+	ctx_entry = kmalloc(sizeof(*ctx_entry), GFP_KERNEL);
 	if (!ctx_entry) {
 		DRM_DEBUG("out of memory\n");
 		return -ENOMEM;
@@ -456,7 +456,7 @@ int drm_rmctx(struct drm_device *dev, void *data,
 		list_for_each_entry_safe(pos, n, &dev->ctxlist, head) {
 			if (pos->handle == ctx->handle) {
 				list_del(&pos->head);
-				drm_free(pos, sizeof(*pos), DRM_MEM_CTXLIST);
+				kfree(pos);
 				--dev->ctx_count;
 			}
 		}
diff --git a/drivers/gpu/drm/drm_debugfs.c b/drivers/gpu/drm/drm_debugfs.c
index 6ce0e2667a8..2960b6d7345 100644
--- a/drivers/gpu/drm/drm_debugfs.c
+++ b/drivers/gpu/drm/drm_debugfs.c
@@ -100,15 +100,13 @@ int drm_debugfs_create_files(struct drm_info_list *files, int count,
 		    (dev->driver->driver_features & features) != features)
 			continue;
 
-		tmp = drm_alloc(sizeof(struct drm_info_node),
-				_DRM_DRIVER);
+		tmp = kmalloc(sizeof(struct drm_info_node), GFP_KERNEL);
 		ent = debugfs_create_file(files[i].name, S_IFREG | S_IRUGO,
 					  root, tmp, &drm_debugfs_fops);
 		if (!ent) {
 			DRM_ERROR("Cannot create /sys/kernel/debug/dri/%s/%s\n",
 				  name, files[i].name);
-			drm_free(tmp, sizeof(struct drm_info_node),
-				 _DRM_DRIVER);
+			kfree(tmp);
 			ret = -1;
 			goto fail;
 		}
@@ -196,8 +194,7 @@ int drm_debugfs_remove_files(struct drm_info_list *files, int count,
 			if (tmp->info_ent == &files[i]) {
 				debugfs_remove(tmp->dent);
 				list_del(pos);
-				drm_free(tmp, sizeof(struct drm_info_node),
-					 _DRM_DRIVER);
+				kfree(tmp);
 			}
 		}
 	}
diff --git a/drivers/gpu/drm/drm_dma.c b/drivers/gpu/drm/drm_dma.c
index 7a8e2fba467..13f1537413f 100644
--- a/drivers/gpu/drm/drm_dma.c
+++ b/drivers/gpu/drm/drm_dma.c
@@ -47,7 +47,7 @@ int drm_dma_setup(struct drm_device *dev)
 {
 	int i;
 
-	dev->dma = drm_alloc(sizeof(*dev->dma), DRM_MEM_DRIVER);
+	dev->dma = kmalloc(sizeof(*dev->dma), GFP_KERNEL);
 	if (!dev->dma)
 		return -ENOMEM;
 
@@ -88,36 +88,19 @@ void drm_dma_takedown(struct drm_device *dev)
 					drm_pci_free(dev, dma->bufs[i].seglist[j]);
 				}
 			}
-			drm_free(dma->bufs[i].seglist,
-				 dma->bufs[i].seg_count
-				 * sizeof(*dma->bufs[0].seglist), DRM_MEM_SEGS);
+			kfree(dma->bufs[i].seglist);
 		}
 		if (dma->bufs[i].buf_count) {
 			for (j = 0; j < dma->bufs[i].buf_count; j++) {
-				if (dma->bufs[i].buflist[j].dev_private) {
-					drm_free(dma->bufs[i].buflist[j].
-						 dev_private,
-						 dma->bufs[i].buflist[j].
-						 dev_priv_size, DRM_MEM_BUFS);
-				}
+				kfree(dma->bufs[i].buflist[j].dev_private);
 			}
-			drm_free(dma->bufs[i].buflist,
-				 dma->bufs[i].buf_count *
-				 sizeof(*dma->bufs[0].buflist), DRM_MEM_BUFS);
+			kfree(dma->bufs[i].buflist);
 		}
 	}
 
-	if (dma->buflist) {
-		drm_free(dma->buflist,
-			 dma->buf_count * sizeof(*dma->buflist), DRM_MEM_BUFS);
-	}
-
-	if (dma->pagelist) {
-		drm_free(dma->pagelist,
-			 dma->page_count * sizeof(*dma->pagelist),
-			 DRM_MEM_PAGES);
-	}
-	drm_free(dev->dma, sizeof(*dev->dma), DRM_MEM_DRIVER);
+	kfree(dma->buflist);
+	kfree(dma->pagelist);
+	kfree(dev->dma);
 	dev->dma = NULL;
 }
 
diff --git a/drivers/gpu/drm/drm_drawable.c b/drivers/gpu/drm/drm_drawable.c
index 80be1cab62a..c53c9768cc1 100644
--- a/drivers/gpu/drm/drm_drawable.c
+++ b/drivers/gpu/drm/drm_drawable.c
@@ -85,9 +85,8 @@ int drm_rmdraw(struct drm_device *dev, void *data, struct drm_file *file_priv)
 		spin_unlock_irqrestore(&dev->drw_lock, irqflags);
 		return -EINVAL;
 	}
-	drm_free(info->rects, info->num_rects * sizeof(struct drm_clip_rect),
-			DRM_MEM_BUFS);
-	drm_free(info, sizeof(struct drm_drawable_info), DRM_MEM_BUFS);
+	kfree(info->rects);
+	kfree(info);
 
 	idr_remove(&dev->drw_idr, draw->handle);
 
@@ -106,12 +105,12 @@ int drm_update_drawable_info(struct drm_device *dev, void *data, struct drm_file
 
 	info = idr_find(&dev->drw_idr, update->handle);
 	if (!info) {
-		info = drm_calloc(1, sizeof(*info), DRM_MEM_BUFS);
+		info = kzalloc(sizeof(*info), GFP_KERNEL);
 		if (!info)
 			return -ENOMEM;
 		if (IS_ERR(idr_replace(&dev->drw_idr, info, update->handle))) {
 			DRM_ERROR("No such drawable %d\n", update->handle);
-			drm_free(info, sizeof(*info), DRM_MEM_BUFS);
+			kfree(info);
 			return -EINVAL;
 		}
 	}
@@ -121,8 +120,9 @@ int drm_update_drawable_info(struct drm_device *dev, void *data, struct drm_file
 		if (update->num == 0)
 			rects = NULL;
 		else if (update->num != info->num_rects) {
-			rects = drm_alloc(update->num * sizeof(struct drm_clip_rect),
-					 DRM_MEM_BUFS);
+			rects = kmalloc(update->num *
+					sizeof(struct drm_clip_rect),
+					GFP_KERNEL);
 		} else
 			rects = info->rects;
 
@@ -145,8 +145,7 @@ int drm_update_drawable_info(struct drm_device *dev, void *data, struct drm_file
 		spin_lock_irqsave(&dev->drw_lock, irqflags);
 
 		if (rects != info->rects) {
-			drm_free(info->rects, info->num_rects *
-				 sizeof(struct drm_clip_rect), DRM_MEM_BUFS);
+			kfree(info->rects);
 		}
 
 		info->rects = rects;
@@ -166,8 +165,7 @@ int drm_update_drawable_info(struct drm_device *dev, void *data, struct drm_file
 
 error:
 	if (rects != info->rects)
-		drm_free(rects, update->num * sizeof(struct drm_clip_rect),
-			 DRM_MEM_BUFS);
+		kfree(rects);
 
 	return err;
 }
@@ -186,9 +184,8 @@ static int drm_drawable_free(int idr, void *p, void *data)
 	struct drm_drawable_info *info = p;
 
 	if (info) {
-		drm_free(info->rects, info->num_rects *
-			 sizeof(struct drm_clip_rect), DRM_MEM_BUFS);
-		drm_free(info, sizeof(*info), DRM_MEM_BUFS);
+		kfree(info->rects);
+		kfree(info);
 	}
 
 	return 0;
diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index 1bf7efd8d33..b39d7bfc0c9 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -189,7 +189,7 @@ int drm_lastclose(struct drm_device * dev)
 			if (entry->bound)
 				drm_unbind_agp(entry->memory);
 			drm_free_agp(entry->memory, entry->pages);
-			drm_free(entry, sizeof(*entry), DRM_MEM_AGPLISTS);
+			kfree(entry);
 		}
 		INIT_LIST_HEAD(&dev->agp->memory);
 
@@ -208,21 +208,15 @@ int drm_lastclose(struct drm_device * dev)
 	/* Clear vma list (only built for debugging) */
 	list_for_each_entry_safe(vma, vma_temp, &dev->vmalist, head) {
 		list_del(&vma->head);
-		drm_free(vma, sizeof(*vma), DRM_MEM_VMAS);
+		kfree(vma);
 	}
 
 	if (drm_core_check_feature(dev, DRIVER_DMA_QUEUE) && dev->queuelist) {
 		for (i = 0; i < dev->queue_count; i++) {
-			if (dev->queuelist[i]) {
-				drm_free(dev->queuelist[i],
-					 sizeof(*dev->queuelist[0]),
-					 DRM_MEM_QUEUES);
-				dev->queuelist[i] = NULL;
-			}
+			kfree(dev->queuelist[i]);
+			dev->queuelist[i] = NULL;
 		}
-		drm_free(dev->queuelist,
-			 dev->queue_slots * sizeof(*dev->queuelist),
-			 DRM_MEM_QUEUES);
+		kfree(dev->queuelist);
 		dev->queuelist = NULL;
 	}
 	dev->queue_count = 0;
@@ -344,8 +338,6 @@ static int __init drm_core_init(void)
 		goto err_p3;
 	}
 
-	drm_mem_init();
-
 	DRM_INFO("Initialized %s %d.%d.%d %s\n",
 		 CORE_NAME, CORE_MAJOR, CORE_MINOR, CORE_PATCHLEVEL, CORE_DATE);
 	return 0;
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 801a0d0e081..7d0835226f6 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -252,16 +252,18 @@ struct drm_display_mode *drm_mode_std(struct drm_device *dev,
 {
 	struct drm_display_mode *mode;
 	int hsize = t->hsize * 8 + 248, vsize;
+	unsigned aspect_ratio = (t->vfreq_aspect & EDID_TIMING_ASPECT_MASK)
+		>> EDID_TIMING_ASPECT_SHIFT;
 
 	mode = drm_mode_create(dev);
 	if (!mode)
 		return NULL;
 
-	if (t->aspect_ratio == 0)
+	if (aspect_ratio == 0)
 		vsize = (hsize * 10) / 16;
-	else if (t->aspect_ratio == 1)
+	else if (aspect_ratio == 1)
 		vsize = (hsize * 3) / 4;
-	else if (t->aspect_ratio == 2)
+	else if (aspect_ratio == 2)
 		vsize = (hsize * 4) / 5;
 	else
 		vsize = (hsize * 9) / 16;
@@ -288,17 +290,24 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev,
 {
 	struct drm_display_mode *mode;
 	struct detailed_pixel_timing *pt = &timing->data.pixel_data;
+	unsigned hactive = (pt->hactive_hblank_hi & 0xf0) << 4 | pt->hactive_lo;
+	unsigned vactive = (pt->vactive_vblank_hi & 0xf0) << 4 | pt->vactive_lo;
+	unsigned hblank = (pt->hactive_hblank_hi & 0xf) << 8 | pt->hblank_lo;
+	unsigned vblank = (pt->vactive_vblank_hi & 0xf) << 8 | pt->vblank_lo;
+	unsigned hsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0x3) << 8 | pt->hsync_offset_lo;
+	unsigned hsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0xc) << 6 | pt->hsync_pulse_width_lo;
+	unsigned vsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0x30) | (pt->vsync_offset_pulse_width_lo & 0xf);
+	unsigned vsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0xc0) >> 2 | pt->vsync_offset_pulse_width_lo >> 4;
 
 	/* ignore tiny modes */
-	if (((pt->hactive_hi << 8) | pt->hactive_lo) < 64 ||
-	    ((pt->vactive_hi << 8) | pt->hactive_lo) < 64)
+	if (hactive < 64 || vactive < 64)
 		return NULL;
 
-	if (pt->stereo) {
+	if (pt->misc & DRM_EDID_PT_STEREO) {
 		printk(KERN_WARNING "stereo mode not supported\n");
 		return NULL;
 	}
-	if (!pt->separate_sync) {
+	if (!(pt->misc & DRM_EDID_PT_SEPARATE_SYNC)) {
 		printk(KERN_WARNING "integrated sync not supported\n");
 		return NULL;
 	}
@@ -310,41 +319,36 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev,
 	mode->type = DRM_MODE_TYPE_DRIVER;
 
 	if (quirks & EDID_QUIRK_135_CLOCK_TOO_HIGH)
-		timing->pixel_clock = 1088;
-
-	mode->clock = timing->pixel_clock * 10;
-
-	mode->hdisplay = (pt->hactive_hi << 8) | pt->hactive_lo;
-	mode->hsync_start = mode->hdisplay + ((pt->hsync_offset_hi << 8) |
-					      pt->hsync_offset_lo);
-	mode->hsync_end = mode->hsync_start +
-		((pt->hsync_pulse_width_hi << 8) |
-		 pt->hsync_pulse_width_lo);
-	mode->htotal = mode->hdisplay + ((pt->hblank_hi << 8) | pt->hblank_lo);
-
-	mode->vdisplay = (pt->vactive_hi << 8) | pt->vactive_lo;
-	mode->vsync_start = mode->vdisplay + ((pt->vsync_offset_hi << 4) |
-					      pt->vsync_offset_lo);
-	mode->vsync_end = mode->vsync_start +
-		((pt->vsync_pulse_width_hi << 4) |
-		 pt->vsync_pulse_width_lo);
-	mode->vtotal = mode->vdisplay + ((pt->vblank_hi << 8) | pt->vblank_lo);
+		timing->pixel_clock = cpu_to_le16(1088);
+
+	mode->clock = le16_to_cpu(timing->pixel_clock) * 10;
+
+	mode->hdisplay = hactive;
+	mode->hsync_start = mode->hdisplay + hsync_offset;
+	mode->hsync_end = mode->hsync_start + hsync_pulse_width;
+	mode->htotal = mode->hdisplay + hblank;
+
+	mode->vdisplay = vactive;
+	mode->vsync_start = mode->vdisplay + vsync_offset;
+	mode->vsync_end = mode->vsync_start + vsync_pulse_width;
+	mode->vtotal = mode->vdisplay + vblank;
 
 	drm_mode_set_name(mode);
 
-	if (pt->interlaced)
+	if (pt->misc & DRM_EDID_PT_INTERLACED)
 		mode->flags |= DRM_MODE_FLAG_INTERLACE;
 
 	if (quirks & EDID_QUIRK_DETAILED_SYNC_PP) {
-		pt->hsync_positive = 1;
-		pt->vsync_positive = 1;
+		pt->misc |= DRM_EDID_PT_HSYNC_POSITIVE | DRM_EDID_PT_VSYNC_POSITIVE;
 	}
 
-	mode->flags |= pt->hsync_positive ? DRM_MODE_FLAG_PHSYNC : DRM_MODE_FLAG_NHSYNC;
-	mode->flags |= pt->vsync_positive ? DRM_MODE_FLAG_PVSYNC : DRM_MODE_FLAG_NVSYNC;
+	mode->flags |= (pt->misc & DRM_EDID_PT_HSYNC_POSITIVE) ?
+		DRM_MODE_FLAG_PHSYNC : DRM_MODE_FLAG_NHSYNC;
+	mode->flags |= (pt->misc & DRM_EDID_PT_VSYNC_POSITIVE) ?
+		DRM_MODE_FLAG_PVSYNC : DRM_MODE_FLAG_NVSYNC;
 
-	mode->width_mm = pt->width_mm_lo | (pt->width_mm_hi << 8);
-	mode->height_mm = pt->height_mm_lo | (pt->height_mm_hi << 8);
+	mode->width_mm = pt->width_mm_lo | (pt->width_height_mm_hi & 0xf) << 8;
+	mode->height_mm = pt->height_mm_lo | (pt->width_height_mm_hi & 0xf0) << 4;
 
 	if (quirks & EDID_QUIRK_DETAILED_IN_CM) {
 		mode->width_mm *= 10;
@@ -465,7 +469,7 @@ static int add_standard_modes(struct drm_connector *connector, struct edid *edid
 		struct drm_display_mode *newmode;
 
 		/* If std timings bytes are 1, 1 it's empty */
-		if (t->hsize == 1 && (t->aspect_ratio | t->vfreq) == 1)
+		if (t->hsize == 1 && t->vfreq_aspect == 1)
 			continue;
 
 		newmode = drm_mode_std(dev, &edid->standard_timings[i]);
@@ -509,7 +513,7 @@ static int add_detailed_info(struct drm_connector *connector,
 				continue;
 
 			/* First detailed mode is preferred */
-			if (i == 0 && edid->preferred_timing)
+			if (i == 0 && (edid->features & DRM_EDID_FEATURE_PREFERRED_TIMING))
 				newmode->type |= DRM_MODE_TYPE_PREFERRED;
 			drm_mode_probed_add(connector, newmode);
 
@@ -767,22 +771,22 @@ int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid)
 	if (quirks & (EDID_QUIRK_PREFER_LARGE_60 | EDID_QUIRK_PREFER_LARGE_75))
 		edid_fixup_preferred(connector, quirks);
 
-	connector->display_info.serration_vsync = edid->serration_vsync;
-	connector->display_info.sync_on_green = edid->sync_on_green;
-	connector->display_info.composite_sync = edid->composite_sync;
-	connector->display_info.separate_syncs = edid->separate_syncs;
-	connector->display_info.blank_to_black = edid->blank_to_black;
-	connector->display_info.video_level = edid->video_level;
-	connector->display_info.digital = edid->digital;
+	connector->display_info.serration_vsync = (edid->input & DRM_EDID_INPUT_SERRATION_VSYNC) ? 1 : 0;
+	connector->display_info.sync_on_green = (edid->input & DRM_EDID_INPUT_SYNC_ON_GREEN) ? 1 : 0;
+	connector->display_info.composite_sync = (edid->input & DRM_EDID_INPUT_COMPOSITE_SYNC) ? 1 : 0;
+	connector->display_info.separate_syncs = (edid->input & DRM_EDID_INPUT_SEPARATE_SYNCS) ? 1 : 0;
+	connector->display_info.blank_to_black = (edid->input & DRM_EDID_INPUT_BLANK_TO_BLACK) ? 1 : 0;
+	connector->display_info.video_level = (edid->input & DRM_EDID_INPUT_VIDEO_LEVEL) >> 5;
+	connector->display_info.digital = (edid->input & DRM_EDID_INPUT_DIGITAL) ? 1 : 0;
 	connector->display_info.width_mm = edid->width_cm * 10;
 	connector->display_info.height_mm = edid->height_cm * 10;
 	connector->display_info.gamma = edid->gamma;
-	connector->display_info.gtf_supported = edid->default_gtf;
-	connector->display_info.standard_color = edid->standard_color;
-	connector->display_info.display_type = edid->display_type;
-	connector->display_info.active_off_supported = edid->pm_active_off;
-	connector->display_info.suspend_supported = edid->pm_suspend;
-	connector->display_info.standby_supported = edid->pm_standby;
+	connector->display_info.gtf_supported = (edid->features & DRM_EDID_FEATURE_DEFAULT_GTF) ? 1 : 0;
+	connector->display_info.standard_color = (edid->features & DRM_EDID_FEATURE_STANDARD_COLOR) ? 1 : 0;
+	connector->display_info.display_type = (edid->features & DRM_EDID_FEATURE_DISPLAY_TYPE) >> 3;
+	connector->display_info.active_off_supported = (edid->features & DRM_EDID_FEATURE_PM_ACTIVE_OFF) ? 1 : 0;
+	connector->display_info.suspend_supported = (edid->features & DRM_EDID_FEATURE_PM_SUSPEND) ? 1 : 0;
+	connector->display_info.standby_supported = (edid->features & DRM_EDID_FEATURE_PM_STANDBY) ? 1 : 0;
 	connector->display_info.gamma = edid->gamma;
 
 	return num_modes;
diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c
index 09a3571c990..251bc0e3b5e 100644
--- a/drivers/gpu/drm/drm_fops.c
+++ b/drivers/gpu/drm/drm_fops.c
@@ -240,7 +240,7 @@ static int drm_open_helper(struct inode *inode, struct file *filp,
 
 	DRM_DEBUG("pid = %d, minor = %d\n", task_pid_nr(current), minor_id);
 
-	priv = drm_alloc(sizeof(*priv), DRM_MEM_FILES);
+	priv = kmalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
@@ -328,7 +328,7 @@ static int drm_open_helper(struct inode *inode, struct file *filp,
 
 	return 0;
       out_free:
-	drm_free(priv, sizeof(*priv), DRM_MEM_FILES);
+	kfree(priv);
 	filp->private_data = NULL;
 	return ret;
 }
@@ -471,7 +471,7 @@ int drm_release(struct inode *inode, struct file *filp)
 				drm_ctxbitmap_free(dev, pos->handle);
 
 				list_del(&pos->head);
-				drm_free(pos, sizeof(*pos), DRM_MEM_CTXLIST);
+				kfree(pos);
 				--dev->ctx_count;
 			}
 		}
@@ -516,7 +516,7 @@ int drm_release(struct inode *inode, struct file *filp)
 
 	if (dev->driver->postclose)
 		dev->driver->postclose(dev, file_priv);
-	drm_free(file_priv, sizeof(*file_priv), DRM_MEM_FILES);
+	kfree(file_priv);
 
 	/* ========================================================
 	 * End inline drm_release
diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c
index ec43005100d..8104ecaea26 100644
--- a/drivers/gpu/drm/drm_gem.c
+++ b/drivers/gpu/drm/drm_gem.c
@@ -89,7 +89,7 @@ drm_gem_init(struct drm_device *dev)
 	atomic_set(&dev->gtt_count, 0);
 	atomic_set(&dev->gtt_memory, 0);
 
-	mm = drm_calloc(1, sizeof(struct drm_gem_mm), DRM_MEM_MM);
+	mm = kzalloc(sizeof(struct drm_gem_mm), GFP_KERNEL);
 	if (!mm) {
 		DRM_ERROR("out of memory\n");
 		return -ENOMEM;
@@ -98,14 +98,14 @@ drm_gem_init(struct drm_device *dev)
 	dev->mm_private = mm;
 
 	if (drm_ht_create(&mm->offset_hash, 19)) {
-		drm_free(mm, sizeof(struct drm_gem_mm), DRM_MEM_MM);
+		kfree(mm);
 		return -ENOMEM;
 	}
 
 	if (drm_mm_init(&mm->offset_manager, DRM_FILE_PAGE_OFFSET_START,
 			DRM_FILE_PAGE_OFFSET_SIZE)) {
 		drm_ht_remove(&mm->offset_hash);
-		drm_free(mm, sizeof(struct drm_gem_mm), DRM_MEM_MM);
+		kfree(mm);
 		return -ENOMEM;
 	}
 
@@ -119,7 +119,7 @@ drm_gem_destroy(struct drm_device *dev)
 
 	drm_mm_takedown(&mm->offset_manager);
 	drm_ht_remove(&mm->offset_hash);
-	drm_free(mm, sizeof(struct drm_gem_mm), DRM_MEM_MM);
+	kfree(mm);
 	dev->mm_private = NULL;
 }
 
diff --git a/drivers/gpu/drm/drm_hashtab.c b/drivers/gpu/drm/drm_hashtab.c
index ac35145c3e2..f36b21c5b2e 100644
--- a/drivers/gpu/drm/drm_hashtab.c
+++ b/drivers/gpu/drm/drm_hashtab.c
@@ -46,8 +46,7 @@ int drm_ht_create(struct drm_open_hash *ht, unsigned int order)
 	ht->table = NULL;
 	ht->use_vmalloc = ((ht->size * sizeof(*ht->table)) > PAGE_SIZE);
 	if (!ht->use_vmalloc) {
-		ht->table = drm_calloc(ht->size, sizeof(*ht->table),
-				       DRM_MEM_HASHTAB);
+		ht->table = kcalloc(ht->size, sizeof(*ht->table), GFP_KERNEL);
 	}
 	if (!ht->table) {
 		ht->use_vmalloc = 1;
@@ -200,8 +199,7 @@ void drm_ht_remove(struct drm_open_hash *ht)
 		if (ht->use_vmalloc)
 			vfree(ht->table);
 		else
-			drm_free(ht->table, ht->size * sizeof(*ht->table),
-				 DRM_MEM_HASHTAB);
+			kfree(ht->table);
 		ht->table = NULL;
 	}
 }
diff --git a/drivers/gpu/drm/drm_ioctl.c b/drivers/gpu/drm/drm_ioctl.c
index 1fad76289e6..9b9ff46c237 100644
--- a/drivers/gpu/drm/drm_ioctl.c
+++ b/drivers/gpu/drm/drm_ioctl.c
@@ -93,7 +93,7 @@ int drm_setunique(struct drm_device *dev, void *data,
 
 	master->unique_len = u->unique_len;
 	master->unique_size = u->unique_len + 1;
-	master->unique = drm_alloc(master->unique_size, DRM_MEM_DRIVER);
+	master->unique = kmalloc(master->unique_size, GFP_KERNEL);
 	if (!master->unique)
 		return -ENOMEM;
 	if (copy_from_user(master->unique, u->unique, master->unique_len))
@@ -101,9 +101,8 @@ int drm_setunique(struct drm_device *dev, void *data,
 
 	master->unique[master->unique_len] = '\0';
 
-	dev->devname =
-	    drm_alloc(strlen(dev->driver->pci_driver.name) +
-		      strlen(master->unique) + 2, DRM_MEM_DRIVER);
+	dev->devname = kmalloc(strlen(dev->driver->pci_driver.name) +
+			       strlen(master->unique) + 2, GFP_KERNEL);
 	if (!dev->devname)
 		return -ENOMEM;
 
@@ -138,7 +137,7 @@ static int drm_set_busid(struct drm_device *dev, struct drm_file *file_priv)
 
 	master->unique_len = 40;
 	master->unique_size = master->unique_len;
-	master->unique = drm_alloc(master->unique_size, DRM_MEM_DRIVER);
+	master->unique = kmalloc(master->unique_size, GFP_KERNEL);
 	if (master->unique == NULL)
 		return -ENOMEM;
 
@@ -152,9 +151,8 @@ static int drm_set_busid(struct drm_device *dev, struct drm_file *file_priv)
 	else
 		master->unique_len = len;
 
-	dev->devname =
-	    drm_alloc(strlen(dev->driver->pci_driver.name) + master->unique_len +
-		      2, DRM_MEM_DRIVER);
+	dev->devname = kmalloc(strlen(dev->driver->pci_driver.name) +
+			       master->unique_len + 2, GFP_KERNEL);
 	if (dev->devname == NULL)
 		return -ENOMEM;
 
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index fc8e5acd9d9..b4a3dbcebe9 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -104,21 +104,13 @@ void drm_vblank_cleanup(struct drm_device *dev)
 
 	vblank_disable_fn((unsigned long)dev);
 
-	drm_free(dev->vbl_queue, sizeof(*dev->vbl_queue) * dev->num_crtcs,
-		 DRM_MEM_DRIVER);
-	drm_free(dev->_vblank_count, sizeof(*dev->_vblank_count) *
-		 dev->num_crtcs, DRM_MEM_DRIVER);
-	drm_free(dev->vblank_refcount, sizeof(*dev->vblank_refcount) *
-		 dev->num_crtcs, DRM_MEM_DRIVER);
-	drm_free(dev->vblank_enabled, sizeof(*dev->vblank_enabled) *
-		 dev->num_crtcs, DRM_MEM_DRIVER);
-	drm_free(dev->last_vblank, sizeof(*dev->last_vblank) * dev->num_crtcs,
-		 DRM_MEM_DRIVER);
-	drm_free(dev->last_vblank_wait,
-		 sizeof(*dev->last_vblank_wait) * dev->num_crtcs,
-		 DRM_MEM_DRIVER);
-	drm_free(dev->vblank_inmodeset, sizeof(*dev->vblank_inmodeset) *
-		 dev->num_crtcs, DRM_MEM_DRIVER);
+	kfree(dev->vbl_queue);
+	kfree(dev->_vblank_count);
+	kfree(dev->vblank_refcount);
+	kfree(dev->vblank_enabled);
+	kfree(dev->last_vblank);
+	kfree(dev->last_vblank_wait);
+	kfree(dev->vblank_inmodeset);
 
 	dev->num_crtcs = 0;
 }
@@ -132,37 +124,33 @@ int drm_vblank_init(struct drm_device *dev, int num_crtcs)
 	spin_lock_init(&dev->vbl_lock);
 	dev->num_crtcs = num_crtcs;
 
-	dev->vbl_queue = drm_alloc(sizeof(wait_queue_head_t) * num_crtcs,
-				   DRM_MEM_DRIVER);
+	dev->vbl_queue = kmalloc(sizeof(wait_queue_head_t) * num_crtcs,
+				 GFP_KERNEL);
 	if (!dev->vbl_queue)
 		goto err;
 
-	dev->_vblank_count = drm_alloc(sizeof(atomic_t) * num_crtcs,
-				      DRM_MEM_DRIVER);
+	dev->_vblank_count = kmalloc(sizeof(atomic_t) * num_crtcs, GFP_KERNEL);
 	if (!dev->_vblank_count)
 		goto err;
 
-	dev->vblank_refcount = drm_alloc(sizeof(atomic_t) * num_crtcs,
-					 DRM_MEM_DRIVER);
+	dev->vblank_refcount = kmalloc(sizeof(atomic_t) * num_crtcs,
+				       GFP_KERNEL);
 	if (!dev->vblank_refcount)
 		goto err;
 
-	dev->vblank_enabled = drm_calloc(num_crtcs, sizeof(int),
-					 DRM_MEM_DRIVER);
+	dev->vblank_enabled = kcalloc(num_crtcs, sizeof(int), GFP_KERNEL);
 	if (!dev->vblank_enabled)
 		goto err;
 
-	dev->last_vblank = drm_calloc(num_crtcs, sizeof(u32), DRM_MEM_DRIVER);
+	dev->last_vblank = kcalloc(num_crtcs, sizeof(u32), GFP_KERNEL);
 	if (!dev->last_vblank)
 		goto err;
 
-	dev->last_vblank_wait = drm_calloc(num_crtcs, sizeof(u32),
-					   DRM_MEM_DRIVER);
+	dev->last_vblank_wait = kcalloc(num_crtcs, sizeof(u32), GFP_KERNEL);
 	if (!dev->last_vblank_wait)
 		goto err;
 
-	dev->vblank_inmodeset = drm_calloc(num_crtcs, sizeof(int),
-					 DRM_MEM_DRIVER);
+	dev->vblank_inmodeset = kcalloc(num_crtcs, sizeof(int), GFP_KERNEL);
 	if (!dev->vblank_inmodeset)
 		goto err;
 
diff --git a/drivers/gpu/drm/drm_memory.c b/drivers/gpu/drm/drm_memory.c
index 0c707f533ea..e4865f99989 100644
--- a/drivers/gpu/drm/drm_memory.c
+++ b/drivers/gpu/drm/drm_memory.c
@@ -36,15 +36,6 @@
 #include <linux/highmem.h>
 #include "drmP.h"
 
-#ifdef DEBUG_MEMORY
-#include "drm_memory_debug.h"
-#else
-
-/** No-op. */
-void drm_mem_init(void)
-{
-}
-
 /**
  * Called when "/proc/dri/%dev%/mem" is read.
  *
@@ -64,28 +55,15 @@ int drm_mem_info(char *buf, char **start, off_t offset,
 	return 0;
 }
 
-/** Wrapper around kmalloc() and kfree() */
-void *drm_realloc(void *oldpt, size_t oldsize, size_t size, int area)
-{
-	void *pt;
-
-	if (!(pt = kmalloc(size, GFP_KERNEL)))
-		return NULL;
-	if (oldpt && oldsize) {
-		memcpy(pt, oldpt, oldsize);
-		kfree(oldpt);
-	}
-	return pt;
-}
-
 #if __OS_HAS_AGP
 static void *agp_remap(unsigned long offset, unsigned long size,
 		       struct drm_device * dev)
 {
-	unsigned long *phys_addr_map, i, num_pages =
+	unsigned long i, num_pages =
 	    PAGE_ALIGN(size) / PAGE_SIZE;
 	struct drm_agp_mem *agpmem;
 	struct page **page_map;
+	struct page **phys_page_map;
 	void *addr;
 
 	size = PAGE_ALIGN(size);
@@ -112,10 +90,9 @@ static void *agp_remap(unsigned long offset, unsigned long size,
 	if (!page_map)
 		return NULL;
 
-	phys_addr_map =
-	    agpmem->memory->memory + (offset - agpmem->bound) / PAGE_SIZE;
+	phys_page_map = (agpmem->memory->pages + (offset - agpmem->bound) / PAGE_SIZE);
 	for (i = 0; i < num_pages; ++i)
-		page_map[i] = pfn_to_page(phys_addr_map[i] >> PAGE_SHIFT);
+		page_map[i] = phys_page_map[i];
 	addr = vmap(page_map, num_pages, VM_IOREMAP, PAGE_AGP);
 	vfree(page_map);
 
@@ -157,8 +134,6 @@ static inline void *agp_remap(unsigned long offset, unsigned long size,
 
 #endif				/* agp */
 
-#endif				/* debug_memory */
-
 void drm_core_ioremap(struct drm_local_map *map, struct drm_device *dev)
 {
 	if (drm_core_has_AGP(dev) &&
diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index a912a0ff11c..3e47869d6da 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -187,9 +187,10 @@ static struct drm_mm_node *drm_mm_split_at_start(struct drm_mm_node *parent,
 }
 
 
-
-struct drm_mm_node *drm_mm_get_block(struct drm_mm_node *node,
-				     unsigned long size, unsigned alignment)
+struct drm_mm_node *drm_mm_get_block_generic(struct drm_mm_node *node,
+					     unsigned long size,
+					     unsigned alignment,
+					     int atomic)
 {
 
 	struct drm_mm_node *align_splitoff = NULL;
@@ -200,7 +201,7 @@ struct drm_mm_node *drm_mm_get_block(struct drm_mm_node *node,
 
 	if (tmp) {
 		align_splitoff =
-		    drm_mm_split_at_start(node, alignment - tmp, 0);
+		    drm_mm_split_at_start(node, alignment - tmp, atomic);
 		if (unlikely(align_splitoff == NULL))
 			return NULL;
 	}
@@ -209,7 +210,7 @@ struct drm_mm_node *drm_mm_get_block(struct drm_mm_node *node,
 		list_del_init(&node->fl_entry);
 		node->free = 0;
 	} else {
-		node = drm_mm_split_at_start(node, size, 0);
+		node = drm_mm_split_at_start(node, size, atomic);
 	}
 
 	if (align_splitoff)
@@ -217,42 +218,7 @@ struct drm_mm_node *drm_mm_get_block(struct drm_mm_node *node,
 
 	return node;
 }
-
-EXPORT_SYMBOL(drm_mm_get_block);
-
-struct drm_mm_node *drm_mm_get_block_atomic(struct drm_mm_node *parent,
-					    unsigned long size,
-					    unsigned alignment)
-{
-
-	struct drm_mm_node *align_splitoff = NULL;
-	struct drm_mm_node *child;
-	unsigned tmp = 0;
-
-	if (alignment)
-		tmp = parent->start % alignment;
-
-	if (tmp) {
-		align_splitoff =
-		    drm_mm_split_at_start(parent, alignment - tmp, 1);
-		if (unlikely(align_splitoff == NULL))
-			return NULL;
-	}
-
-	if (parent->size == size) {
-		list_del_init(&parent->fl_entry);
-		parent->free = 0;
-		return parent;
-	} else {
-		child = drm_mm_split_at_start(parent, size, 1);
-	}
-
-	if (align_splitoff)
-		drm_mm_put_block(align_splitoff);
-
-	return child;
-}
-EXPORT_SYMBOL(drm_mm_get_block_atomic);
+EXPORT_SYMBOL(drm_mm_get_block_generic);
 
 /*
  * Put a block. Merge with the previous and / or next block if they are free.
diff --git a/drivers/gpu/drm/drm_pci.c b/drivers/gpu/drm/drm_pci.c
index b55d5bc6ea6..577094fb199 100644
--- a/drivers/gpu/drm/drm_pci.c
+++ b/drivers/gpu/drm/drm_pci.c
@@ -55,17 +55,6 @@ drm_dma_handle_t *drm_pci_alloc(struct drm_device * dev, size_t size, size_t ali
 	unsigned long addr;
 	size_t sz;
 #endif
-#ifdef DRM_DEBUG_MEMORY
-	int area = DRM_MEM_DMA;
-
-	spin_lock(&drm_mem_lock);
-	if ((drm_ram_used >> PAGE_SHIFT)
-	    > (DRM_RAM_PERCENT * drm_ram_available) / 100) {
-		spin_unlock(&drm_mem_lock);
-		return 0;
-	}
-	spin_unlock(&drm_mem_lock);
-#endif
 
 	/* pci_alloc_consistent only guarantees alignment to the smallest
 	 * PAGE_SIZE order which is greater than or equal to the requested size.
@@ -86,26 +75,10 @@ drm_dma_handle_t *drm_pci_alloc(struct drm_device * dev, size_t size, size_t ali
 	dmah->size = size;
 	dmah->vaddr = dma_alloc_coherent(&dev->pdev->dev, size, &dmah->busaddr, GFP_KERNEL | __GFP_COMP);
 
-#ifdef DRM_DEBUG_MEMORY
-	if (dmah->vaddr == NULL) {
-		spin_lock(&drm_mem_lock);
-		++drm_mem_stats[area].fail_count;
-		spin_unlock(&drm_mem_lock);
-		kfree(dmah);
-		return NULL;
-	}
-
-	spin_lock(&drm_mem_lock);
-	++drm_mem_stats[area].succeed_count;
-	drm_mem_stats[area].bytes_allocated += size;
-	drm_ram_used += size;
-	spin_unlock(&drm_mem_lock);
-#else
 	if (dmah->vaddr == NULL) {
 		kfree(dmah);
 		return NULL;
 	}
-#endif
 
 	memset(dmah->vaddr, 0, size);
 
@@ -132,17 +105,8 @@ void __drm_pci_free(struct drm_device * dev, drm_dma_handle_t * dmah)
 	unsigned long addr;
 	size_t sz;
 #endif
-#ifdef DRM_DEBUG_MEMORY
-	int area = DRM_MEM_DMA;
-	int alloc_count;
-	int free_count;
-#endif
 
-	if (!dmah->vaddr) {
-#ifdef DRM_DEBUG_MEMORY
-		DRM_MEM_ERROR(area, "Attempt to free address 0\n");
-#endif
-	} else {
+	if (dmah->vaddr) {
 		/* XXX - Is virt_to_page() legal for consistent mem? */
 		/* Unreserve */
 		for (addr = (unsigned long)dmah->vaddr, sz = dmah->size;
@@ -152,21 +116,6 @@ void __drm_pci_free(struct drm_device * dev, drm_dma_handle_t * dmah)
 		dma_free_coherent(&dev->pdev->dev, dmah->size, dmah->vaddr,
 				  dmah->busaddr);
 	}
-
-#ifdef DRM_DEBUG_MEMORY
-	spin_lock(&drm_mem_lock);
-	free_count = ++drm_mem_stats[area].free_count;
-	alloc_count = drm_mem_stats[area].succeed_count;
-	drm_mem_stats[area].bytes_freed += size;
-	drm_ram_used -= size;
-	spin_unlock(&drm_mem_lock);
-	if (free_count > alloc_count) {
-		DRM_MEM_ERROR(area,
-			      "Excess frees: %d frees, %d allocs\n",
-			      free_count, alloc_count);
-	}
-#endif
-
 }
 
 /**
diff --git a/drivers/gpu/drm/drm_proc.c b/drivers/gpu/drm/drm_proc.c
index bae5391165a..bbd4b3d1074 100644
--- a/drivers/gpu/drm/drm_proc.c
+++ b/drivers/gpu/drm/drm_proc.c
@@ -105,13 +105,12 @@ int drm_proc_create_files(struct drm_info_list *files, int count,
 		    (dev->driver->driver_features & features) != features)
 			continue;
 
-		tmp = drm_alloc(sizeof(struct drm_info_node), _DRM_DRIVER);
+		tmp = kmalloc(sizeof(struct drm_info_node), GFP_KERNEL);
 		ent = create_proc_entry(files[i].name, S_IFREG | S_IRUGO, root);
 		if (!ent) {
 			DRM_ERROR("Cannot create /proc/dri/%s/%s\n",
 				  name, files[i].name);
-			drm_free(tmp, sizeof(struct drm_info_node),
-				 _DRM_DRIVER);
+			kfree(tmp);
 			ret = -1;
 			goto fail;
 		}
@@ -192,8 +191,7 @@ int drm_proc_remove_files(struct drm_info_list *files, int count,
 				remove_proc_entry(files[i].name,
 						  minor->proc_root);
 				list_del(pos);
-				drm_free(tmp, sizeof(struct drm_info_node),
-					 _DRM_DRIVER);
+				kfree(tmp);
 			}
 		}
 	}
diff --git a/drivers/gpu/drm/drm_scatter.c b/drivers/gpu/drm/drm_scatter.c
index b2b0f3d4171..c7823c863d4 100644
--- a/drivers/gpu/drm/drm_scatter.c
+++ b/drivers/gpu/drm/drm_scatter.c
@@ -58,11 +58,9 @@ void drm_sg_cleanup(struct drm_sg_mem * entry)
 
 	vfree(entry->virtual);
 
-	drm_free(entry->busaddr,
-		 entry->pages * sizeof(*entry->busaddr), DRM_MEM_PAGES);
-	drm_free(entry->pagelist,
-		 entry->pages * sizeof(*entry->pagelist), DRM_MEM_PAGES);
-	drm_free(entry, sizeof(*entry), DRM_MEM_SGLISTS);
+	kfree(entry->busaddr);
+	kfree(entry->pagelist);
+	kfree(entry);
 }
 
 #ifdef _LP64
@@ -84,7 +82,7 @@ int drm_sg_alloc(struct drm_device *dev, struct drm_scatter_gather * request)
 	if (dev->sg)
 		return -EINVAL;
 
-	entry = drm_alloc(sizeof(*entry), DRM_MEM_SGLISTS);
+	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
 	if (!entry)
 		return -ENOMEM;
 
@@ -93,34 +91,27 @@ int drm_sg_alloc(struct drm_device *dev, struct drm_scatter_gather * request)
 	DRM_DEBUG("size=%ld pages=%ld\n", request->size, pages);
 
 	entry->pages = pages;
-	entry->pagelist = drm_alloc(pages * sizeof(*entry->pagelist),
-				    DRM_MEM_PAGES);
+	entry->pagelist = kmalloc(pages * sizeof(*entry->pagelist), GFP_KERNEL);
 	if (!entry->pagelist) {
-		drm_free(entry, sizeof(*entry), DRM_MEM_SGLISTS);
+		kfree(entry);
 		return -ENOMEM;
 	}
 
 	memset(entry->pagelist, 0, pages * sizeof(*entry->pagelist));
 
-	entry->busaddr = drm_alloc(pages * sizeof(*entry->busaddr),
-				   DRM_MEM_PAGES);
+	entry->busaddr = kmalloc(pages * sizeof(*entry->busaddr), GFP_KERNEL);
 	if (!entry->busaddr) {
-		drm_free(entry->pagelist,
-			 entry->pages * sizeof(*entry->pagelist),
-			 DRM_MEM_PAGES);
-		drm_free(entry, sizeof(*entry), DRM_MEM_SGLISTS);
+		kfree(entry->pagelist);
+		kfree(entry);
 		return -ENOMEM;
 	}
 	memset((void *)entry->busaddr, 0, pages * sizeof(*entry->busaddr));
 
 	entry->virtual = drm_vmalloc_dma(pages << PAGE_SHIFT);
 	if (!entry->virtual) {
-		drm_free(entry->busaddr,
-			 entry->pages * sizeof(*entry->busaddr), DRM_MEM_PAGES);
-		drm_free(entry->pagelist,
-			 entry->pages * sizeof(*entry->pagelist),
-			 DRM_MEM_PAGES);
-		drm_free(entry, sizeof(*entry), DRM_MEM_SGLISTS);
+		kfree(entry->busaddr);
+		kfree(entry->pagelist);
+		kfree(entry);
 		return -ENOMEM;
 	}
 
diff --git a/drivers/gpu/drm/drm_sman.c b/drivers/gpu/drm/drm_sman.c
index 926f146390c..463aed9403d 100644
--- a/drivers/gpu/drm/drm_sman.c
+++ b/drivers/gpu/drm/drm_sman.c
@@ -48,9 +48,7 @@ void drm_sman_takedown(struct drm_sman * sman)
 {
 	drm_ht_remove(&sman->user_hash_tab);
 	drm_ht_remove(&sman->owner_hash_tab);
-	if (sman->mm)
-		drm_free(sman->mm, sman->num_managers * sizeof(*sman->mm),
-			 DRM_MEM_MM);
+	kfree(sman->mm);
 }
 
 EXPORT_SYMBOL(drm_sman_takedown);
@@ -61,8 +59,9 @@ drm_sman_init(struct drm_sman * sman, unsigned int num_managers,
 {
 	int ret = 0;
 
-	sman->mm = (struct drm_sman_mm *) drm_calloc(num_managers, sizeof(*sman->mm),
-						DRM_MEM_MM);
+	sman->mm = (struct drm_sman_mm *) kcalloc(num_managers,
+						  sizeof(*sman->mm),
+						  GFP_KERNEL);
 	if (!sman->mm) {
 		ret = -ENOMEM;
 		goto out;
@@ -78,7 +77,7 @@ drm_sman_init(struct drm_sman * sman, unsigned int num_managers,
 
 	drm_ht_remove(&sman->owner_hash_tab);
 out1:
-	drm_free(sman->mm, num_managers * sizeof(*sman->mm), DRM_MEM_MM);
+	kfree(sman->mm);
 out:
 	return ret;
 }
@@ -110,7 +109,7 @@ static void drm_sman_mm_destroy(void *private)
 {
 	struct drm_mm *mm = (struct drm_mm *) private;
 	drm_mm_takedown(mm);
-	drm_free(mm, sizeof(*mm), DRM_MEM_MM);
+	kfree(mm);
 }
 
 static unsigned long drm_sman_mm_offset(void *private, void *ref)
@@ -130,7 +129,7 @@ drm_sman_set_range(struct drm_sman * sman, unsigned int manager,
 	BUG_ON(manager >= sman->num_managers);
 
 	sman_mm = &sman->mm[manager];
-	mm = drm_calloc(1, sizeof(*mm), DRM_MEM_MM);
+	mm = kzalloc(sizeof(*mm), GFP_KERNEL);
 	if (!mm) {
 		return -ENOMEM;
 	}
@@ -138,7 +137,7 @@ drm_sman_set_range(struct drm_sman * sman, unsigned int manager,
 	ret = drm_mm_init(mm, start, size);
 
 	if (ret) {
-		drm_free(mm, sizeof(*mm), DRM_MEM_MM);
+		kfree(mm);
 		return ret;
 	}
 
@@ -176,7 +175,7 @@ static struct drm_owner_item *drm_sman_get_owner_item(struct drm_sman * sman,
 				      owner_hash);
 	}
 
-	owner_item = drm_calloc(1, sizeof(*owner_item), DRM_MEM_MM);
+	owner_item = kzalloc(sizeof(*owner_item), GFP_KERNEL);
 	if (!owner_item)
 		goto out;
 
@@ -189,7 +188,7 @@ static struct drm_owner_item *drm_sman_get_owner_item(struct drm_sman * sman,
 	return owner_item;
 
 out1:
-	drm_free(owner_item, sizeof(*owner_item), DRM_MEM_MM);
+	kfree(owner_item);
 out:
 	return NULL;
 }
@@ -212,7 +211,7 @@ struct drm_memblock_item *drm_sman_alloc(struct drm_sman *sman, unsigned int man
 		return NULL;
 	}
 
-	memblock = drm_calloc(1, sizeof(*memblock), DRM_MEM_MM);
+	memblock = kzalloc(sizeof(*memblock), GFP_KERNEL);
 
 	if (!memblock)
 		goto out;
@@ -237,7 +236,7 @@ struct drm_memblock_item *drm_sman_alloc(struct drm_sman *sman, unsigned int man
 out2:
 	drm_ht_remove_item(&sman->user_hash_tab, &memblock->user_hash);
 out1:
-	drm_free(memblock, sizeof(*memblock), DRM_MEM_MM);
+	kfree(memblock);
 out:
 	sman_mm->free(sman_mm->private, tmp);
 
@@ -253,7 +252,7 @@ static void drm_sman_free(struct drm_memblock_item *item)
 	list_del(&item->owner_list);
 	drm_ht_remove_item(&sman->user_hash_tab, &item->user_hash);
 	item->mm->free(item->mm->private, item->mm_info);
-	drm_free(item, sizeof(*item), DRM_MEM_MM);
+	kfree(item);
 }
 
 int drm_sman_free_key(struct drm_sman *sman, unsigned int key)
@@ -277,7 +276,7 @@ static void drm_sman_remove_owner(struct drm_sman *sman,
 {
 	list_del(&owner_item->sman_list);
 	drm_ht_remove_item(&sman->owner_hash_tab, &owner_item->owner_hash);
-	drm_free(owner_item, sizeof(*owner_item), DRM_MEM_MM);
+	kfree(owner_item);
 }
 
 int drm_sman_owner_clean(struct drm_sman *sman, unsigned long owner)
diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c
index 387a8de1bc7..155a5bbce68 100644
--- a/drivers/gpu/drm/drm_stub.c
+++ b/drivers/gpu/drm/drm_stub.c
@@ -107,7 +107,7 @@ struct drm_master *drm_master_create(struct drm_minor *minor)
 {
 	struct drm_master *master;
 
-	master = drm_calloc(1, sizeof(*master), DRM_MEM_DRIVER);
+	master = kzalloc(sizeof(*master), GFP_KERNEL);
 	if (!master)
 		return NULL;
 
@@ -149,7 +149,7 @@ static void drm_master_destroy(struct kref *kref)
 	}
 
 	if (master->unique) {
-		drm_free(master->unique, master->unique_size, DRM_MEM_DRIVER);
+		kfree(master->unique);
 		master->unique = NULL;
 		master->unique_len = 0;
 	}
@@ -157,12 +157,12 @@ static void drm_master_destroy(struct kref *kref)
 	list_for_each_entry_safe(pt, next, &master->magicfree, head) {
 		list_del(&pt->head);
 		drm_ht_remove_item(&master->magiclist, &pt->hash_item);
-		drm_free(pt, sizeof(*pt), DRM_MEM_MAGIC);
+		kfree(pt);
 	}
 
 	drm_ht_remove(&master->magiclist);
 
-	drm_free(master, sizeof(*master), DRM_MEM_DRIVER);
+	kfree(master);
 }
 
 void drm_master_put(struct drm_master **master)
@@ -390,7 +390,7 @@ int drm_get_dev(struct pci_dev *pdev, const struct pci_device_id *ent,
 
 	DRM_DEBUG("\n");
 
-	dev = drm_calloc(1, sizeof(*dev), DRM_MEM_STUB);
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 	if (!dev)
 		return -ENOMEM;
 
@@ -443,7 +443,7 @@ err_g3:
 err_g2:
 	pci_disable_device(pdev);
 err_g1:
-	drm_free(dev, sizeof(*dev), DRM_MEM_STUB);
+	kfree(dev);
 	return ret;
 }
 EXPORT_SYMBOL(drm_get_dev);
@@ -516,7 +516,7 @@ void drm_put_dev(struct drm_device *dev)
 		dev->driver->unload(dev);
 
 	if (drm_core_has_AGP(dev) && dev->agp) {
-		drm_free(dev->agp, sizeof(*dev->agp), DRM_MEM_AGPLISTS);
+		kfree(dev->agp);
 		dev->agp = NULL;
 	}
 
@@ -535,10 +535,9 @@ void drm_put_dev(struct drm_device *dev)
 	drm_put_minor(&dev->primary);
 
 	if (dev->devname) {
-		drm_free(dev->devname, strlen(dev->devname) + 1,
-			 DRM_MEM_DRIVER);
+		kfree(dev->devname);
 		dev->devname = NULL;
 	}
-	drm_free(dev, sizeof(*dev), DRM_MEM_STUB);
+	kfree(dev);
 }
 EXPORT_SYMBOL(drm_put_dev);
diff --git a/drivers/gpu/drm/drm_vm.c b/drivers/gpu/drm/drm_vm.c
index 22f76567ac7..7e1fbe5d477 100644
--- a/drivers/gpu/drm/drm_vm.c
+++ b/drivers/gpu/drm/drm_vm.c
@@ -144,14 +144,14 @@ static int drm_do_vm_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 		 * Get the page, inc the use count, and return it
 		 */
 		offset = (baddr - agpmem->bound) >> PAGE_SHIFT;
-		page = virt_to_page(__va(agpmem->memory->memory[offset]));
+		page = agpmem->memory->pages[offset];
 		get_page(page);
 		vmf->page = page;
 
 		DRM_DEBUG
 		    ("baddr = 0x%llx page = 0x%p, offset = 0x%llx, count=%d\n",
 		     (unsigned long long)baddr,
-		     __va(agpmem->memory->memory[offset]),
+		     agpmem->memory->pages[offset],
 		     (unsigned long long)offset,
 		     page_count(page));
 		return 0;
@@ -227,7 +227,7 @@ static void drm_vm_shm_close(struct vm_area_struct *vma)
 			found_maps++;
 		if (pt->vma == vma) {
 			list_del(&pt->head);
-			drm_free(pt, sizeof(*pt), DRM_MEM_VMAS);
+			kfree(pt);
 		}
 	}
 
@@ -273,7 +273,7 @@ static void drm_vm_shm_close(struct vm_area_struct *vma)
 				DRM_ERROR("tried to rmmap GEM object\n");
 				break;
 			}
-			drm_free(map, sizeof(*map), DRM_MEM_MAPS);
+			kfree(map);
 		}
 	}
 	mutex_unlock(&dev->struct_mutex);
@@ -414,7 +414,7 @@ void drm_vm_open_locked(struct vm_area_struct *vma)
 		  vma->vm_start, vma->vm_end - vma->vm_start);
 	atomic_inc(&dev->vma_count);
 
-	vma_entry = drm_alloc(sizeof(*vma_entry), DRM_MEM_VMAS);
+	vma_entry = kmalloc(sizeof(*vma_entry), GFP_KERNEL);
 	if (vma_entry) {
 		vma_entry->vma = vma;
 		vma_entry->pid = current->pid;
@@ -454,7 +454,7 @@ static void drm_vm_close(struct vm_area_struct *vma)
 	list_for_each_entry_safe(pt, temp, &dev->vmalist, head) {
 		if (pt->vma == vma) {
 			list_del(&pt->head);
-			drm_free(pt, sizeof(*pt), DRM_MEM_VMAS);
+			kfree(pt);
 			break;
 		}
 	}
diff --git a/drivers/gpu/drm/i810/i810_dma.c b/drivers/gpu/drm/i810/i810_dma.c
index e5de8ea4154..7d1d88cdf2d 100644
--- a/drivers/gpu/drm/i810/i810_dma.c
+++ b/drivers/gpu/drm/i810/i810_dma.c
@@ -227,8 +227,7 @@ static int i810_dma_cleanup(struct drm_device * dev)
 			/* Need to rewrite hardware status page */
 			I810_WRITE(0x02080, 0x1ffff000);
 		}
-		drm_free(dev->dev_private, sizeof(drm_i810_private_t),
-			 DRM_MEM_DRIVER);
+		kfree(dev->dev_private);
 		dev->dev_private = NULL;
 
 		for (i = 0; i < dma->buf_count; i++) {
@@ -439,8 +438,7 @@ static int i810_dma_init(struct drm_device *dev, void *data,
 	switch (init->func) {
 	case I810_INIT_DMA_1_4:
 		DRM_INFO("Using v1.4 init.\n");
-		dev_priv = drm_alloc(sizeof(drm_i810_private_t),
-				     DRM_MEM_DRIVER);
+		dev_priv = kmalloc(sizeof(drm_i810_private_t), GFP_KERNEL);
 		if (dev_priv == NULL)
 			return -ENOMEM;
 		retcode = i810_dma_initialize(dev, dev_priv, init);
diff --git a/drivers/gpu/drm/i830/i830_dma.c b/drivers/gpu/drm/i830/i830_dma.c
index a86ab30b462..877bf6cb14a 100644
--- a/drivers/gpu/drm/i830/i830_dma.c
+++ b/drivers/gpu/drm/i830/i830_dma.c
@@ -232,8 +232,7 @@ static int i830_dma_cleanup(struct drm_device * dev)
 			I830_WRITE(0x02080, 0x1ffff000);
 		}
 
-		drm_free(dev->dev_private, sizeof(drm_i830_private_t),
-			 DRM_MEM_DRIVER);
+		kfree(dev->dev_private);
 		dev->dev_private = NULL;
 
 		for (i = 0; i < dma->buf_count; i++) {
@@ -459,8 +458,7 @@ static int i830_dma_init(struct drm_device *dev, void *data,
 
 	switch (init->func) {
 	case I830_INIT_DMA:
-		dev_priv = drm_alloc(sizeof(drm_i830_private_t),
-				     DRM_MEM_DRIVER);
+		dev_priv = kmalloc(sizeof(drm_i830_private_t), GFP_KERNEL);
 		if (dev_priv == NULL)
 			return -ENOMEM;
 		retcode = i830_dma_initialize(dev, dev_priv, init);
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 1a60626f680..f112c769d53 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -643,9 +643,9 @@ static int i915_batchbuffer(struct drm_device *dev, void *data,
 		return -EINVAL;
 
 	if (batch->num_cliprects) {
-		cliprects = drm_calloc(batch->num_cliprects,
-				       sizeof(struct drm_clip_rect),
-				       DRM_MEM_DRIVER);
+		cliprects = kcalloc(batch->num_cliprects,
+				    sizeof(struct drm_clip_rect),
+				    GFP_KERNEL);
 		if (cliprects == NULL)
 			return -ENOMEM;
 
@@ -664,9 +664,7 @@ static int i915_batchbuffer(struct drm_device *dev, void *data,
 		sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
 
 fail_free:
-	drm_free(cliprects,
-		 batch->num_cliprects * sizeof(struct drm_clip_rect),
-		 DRM_MEM_DRIVER);
+	kfree(cliprects);
 
 	return ret;
 }
@@ -692,7 +690,7 @@ static int i915_cmdbuffer(struct drm_device *dev, void *data,
 	if (cmdbuf->num_cliprects < 0)
 		return -EINVAL;
 
-	batch_data = drm_alloc(cmdbuf->sz, DRM_MEM_DRIVER);
+	batch_data = kmalloc(cmdbuf->sz, GFP_KERNEL);
 	if (batch_data == NULL)
 		return -ENOMEM;
 
@@ -701,9 +699,8 @@ static int i915_cmdbuffer(struct drm_device *dev, void *data,
 		goto fail_batch_free;
 
 	if (cmdbuf->num_cliprects) {
-		cliprects = drm_calloc(cmdbuf->num_cliprects,
-				       sizeof(struct drm_clip_rect),
-				       DRM_MEM_DRIVER);
+		cliprects = kcalloc(cmdbuf->num_cliprects,
+				    sizeof(struct drm_clip_rect), GFP_KERNEL);
 		if (cliprects == NULL)
 			goto fail_batch_free;
 
@@ -726,11 +723,9 @@ static int i915_cmdbuffer(struct drm_device *dev, void *data,
 		sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
 
 fail_clip_free:
-	drm_free(cliprects,
-		 cmdbuf->num_cliprects * sizeof(struct drm_clip_rect),
-		 DRM_MEM_DRIVER);
+	kfree(cliprects);
 fail_batch_free:
-	drm_free(batch_data, cmdbuf->sz, DRM_MEM_DRIVER);
+	kfree(batch_data);
 
 	return ret;
 }
@@ -1067,7 +1062,7 @@ int i915_master_create(struct drm_device *dev, struct drm_master *master)
 {
 	struct drm_i915_master_private *master_priv;
 
-	master_priv = drm_calloc(1, sizeof(*master_priv), DRM_MEM_DRIVER);
+	master_priv = kzalloc(sizeof(*master_priv), GFP_KERNEL);
 	if (!master_priv)
 		return -ENOMEM;
 
@@ -1082,7 +1077,7 @@ void i915_master_destroy(struct drm_device *dev, struct drm_master *master)
 	if (!master_priv)
 		return;
 
-	drm_free(master_priv, sizeof(*master_priv), DRM_MEM_DRIVER);
+	kfree(master_priv);
 
 	master->driver_priv = NULL;
 }
@@ -1111,12 +1106,10 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	dev->types[8] = _DRM_STAT_SECONDARY;
 	dev->types[9] = _DRM_STAT_DMA;
 
-	dev_priv = drm_alloc(sizeof(drm_i915_private_t), DRM_MEM_DRIVER);
+	dev_priv = kzalloc(sizeof(drm_i915_private_t), GFP_KERNEL);
 	if (dev_priv == NULL)
 		return -ENOMEM;
 
-	memset(dev_priv, 0, sizeof(drm_i915_private_t));
-
 	dev->dev_private = (void *)dev_priv;
 	dev_priv->dev = dev;
 
@@ -1153,13 +1146,8 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 			 "performance may suffer.\n");
 	}
 
-#ifdef CONFIG_HIGHMEM64G
-	/* don't enable GEM on PAE - needs agp + set_memory_* interface fixes */
-	dev_priv->has_gem = 0;
-#else
 	/* enable GEM by default */
 	dev_priv->has_gem = 1;
-#endif
 
 	dev->driver->get_vblank_counter = i915_get_vblank_counter;
 	dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
@@ -1221,7 +1209,7 @@ out_iomapfree:
 out_rmmap:
 	iounmap(dev_priv->regs);
 free_priv:
-	drm_free(dev_priv, sizeof(struct drm_i915_private), DRM_MEM_DRIVER);
+	kfree(dev_priv);
 	return ret;
 }
 
@@ -1261,8 +1249,7 @@ int i915_driver_unload(struct drm_device *dev)
 		i915_gem_lastclose(dev);
 	}
 
-	drm_free(dev->dev_private, sizeof(drm_i915_private_t),
-		 DRM_MEM_DRIVER);
+	kfree(dev->dev_private);
 
 	return 0;
 }
@@ -1273,7 +1260,7 @@ int i915_driver_open(struct drm_device *dev, struct drm_file *file_priv)
 
 	DRM_DEBUG_DRIVER(I915_DRV, "\n");
 	i915_file_priv = (struct drm_i915_file_private *)
-	    drm_alloc(sizeof(*i915_file_priv), DRM_MEM_FILES);
+	    kmalloc(sizeof(*i915_file_priv), GFP_KERNEL);
 
 	if (!i915_file_priv)
 		return -ENOMEM;
@@ -1326,7 +1313,7 @@ void i915_driver_postclose(struct drm_device *dev, struct drm_file *file_priv)
 {
 	struct drm_i915_file_private *i915_file_priv = file_priv->driver_priv;
 
-	drm_free(i915_file_priv, sizeof(*i915_file_priv), DRM_MEM_FILES);
+	kfree(i915_file_priv);
 }
 
 struct drm_ioctl_desc i915_ioctls[] = {
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 8ef6bcec211..7a84f04e843 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -646,6 +646,8 @@ void i915_gem_object_unpin(struct drm_gem_object *obj);
 int i915_gem_object_unbind(struct drm_gem_object *obj);
 void i915_gem_lastclose(struct drm_device *dev);
 uint32_t i915_get_gem_seqno(struct drm_device *dev);
+int i915_gem_object_get_fence_reg(struct drm_gem_object *obj);
+int i915_gem_object_put_fence_reg(struct drm_gem_object *obj);
 void i915_gem_retire_requests(struct drm_device *dev);
 void i915_gem_retire_work_handler(struct work_struct *work);
 void i915_gem_clflush_object(struct drm_gem_object *obj);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index c0ae6bbbd9b..fd2b8bdffe3 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -46,7 +46,6 @@ static void i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *o
 static int i915_gem_object_wait_rendering(struct drm_gem_object *obj);
 static int i915_gem_object_bind_to_gtt(struct drm_gem_object *obj,
 					   unsigned alignment);
-static int i915_gem_object_get_fence_reg(struct drm_gem_object *obj, bool write);
 static void i915_gem_clear_fence_reg(struct drm_gem_object *obj);
 static int i915_gem_evict_something(struct drm_device *dev);
 static int i915_gem_phys_pwrite(struct drm_device *dev, struct drm_gem_object *obj,
@@ -1158,7 +1157,7 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 	/* Need a new fence register? */
 	if (obj_priv->fence_reg == I915_FENCE_REG_NONE &&
 	    obj_priv->tiling_mode != I915_TILING_NONE) {
-		ret = i915_gem_object_get_fence_reg(obj, write);
+		ret = i915_gem_object_get_fence_reg(obj);
 		if (ret) {
 			mutex_unlock(&dev->struct_mutex);
 			return VM_FAULT_SIGBUS;
@@ -1208,8 +1207,7 @@ i915_gem_create_mmap_offset(struct drm_gem_object *obj)
 
 	/* Set the object up for mmap'ing */
 	list = &obj->map_list;
-	list->map = drm_calloc(1, sizeof(struct drm_map_list),
-			       DRM_MEM_DRIVER);
+	list->map = kzalloc(sizeof(struct drm_map_list), GFP_KERNEL);
 	if (!list->map)
 		return -ENOMEM;
 
@@ -1249,7 +1247,7 @@ i915_gem_create_mmap_offset(struct drm_gem_object *obj)
 out_free_mm:
 	drm_mm_put_block(list->file_offset_node);
 out_free_list:
-	drm_free(list->map, sizeof(struct drm_map_list), DRM_MEM_DRIVER);
+	kfree(list->map);
 
 	return ret;
 }
@@ -1271,7 +1269,7 @@ i915_gem_free_mmap_offset(struct drm_gem_object *obj)
 	}
 
 	if (list->map) {
-		drm_free(list->map, sizeof(struct drm_map), DRM_MEM_DRIVER);
+		kfree(list->map);
 		list->map = NULL;
 	}
 
@@ -1494,7 +1492,7 @@ i915_add_request(struct drm_device *dev, struct drm_file *file_priv,
 	if (file_priv != NULL)
 		i915_file_priv = file_priv->driver_priv;
 
-	request = drm_calloc(1, sizeof(*request), DRM_MEM_DRIVER);
+	request = kzalloc(sizeof(*request), GFP_KERNEL);
 	if (request == NULL)
 		return 0;
 
@@ -1676,7 +1674,7 @@ i915_gem_retire_requests(struct drm_device *dev)
 
 			list_del(&request->list);
 			list_del(&request->client_list);
-			drm_free(request, sizeof(*request), DRM_MEM_DRIVER);
+			kfree(request);
 		} else
 			break;
 	}
@@ -2163,13 +2161,11 @@ static void i830_write_fence_reg(struct drm_i915_fence_reg *reg)
 	val |= I830_FENCE_REG_VALID;
 
 	I915_WRITE(FENCE_REG_830_0 + (regnum * 4), val);
-
 }
 
 /**
  * i915_gem_object_get_fence_reg - set up a fence reg for an object
  * @obj: object to map through a fence reg
- * @write: object is about to be written
  *
  * When mapping objects through the GTT, userspace wants to be able to write
  * to them without having to worry about swizzling if the object is tiled.
@@ -2180,8 +2176,8 @@ static void i830_write_fence_reg(struct drm_i915_fence_reg *reg)
  * It then sets up the reg based on the object's properties: address, pitch
  * and tiling format.
  */
-static int
-i915_gem_object_get_fence_reg(struct drm_gem_object *obj, bool write)
+int
+i915_gem_object_get_fence_reg(struct drm_gem_object *obj)
 {
 	struct drm_device *dev = obj->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -2331,6 +2327,42 @@ i915_gem_clear_fence_reg(struct drm_gem_object *obj)
 }
 
 /**
+ * i915_gem_object_put_fence_reg - waits on outstanding fenced access
+ * to the buffer to finish, and then resets the fence register.
+ * @obj: tiled object holding a fence register.
+ *
+ * Zeroes out the fence register itself and clears out the associated
+ * data structures in dev_priv and obj_priv.
+ */
+int
+i915_gem_object_put_fence_reg(struct drm_gem_object *obj)
+{
+	struct drm_device *dev = obj->dev;
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
+	if (obj_priv->fence_reg == I915_FENCE_REG_NONE)
+		return 0;
+
+	/* On the i915, GPU access to tiled buffers is via a fence,
+	 * therefore we must wait for any outstanding access to complete
+	 * before clearing the fence.
+	 */
+	if (!IS_I965G(dev)) {
+		int ret;
+
+		i915_gem_object_flush_gpu_write_domain(obj);
+		i915_gem_object_flush_gtt_write_domain(obj);
+		ret = i915_gem_object_wait_rendering(obj);
+		if (ret != 0)
+			return ret;
+	}
+
+	i915_gem_clear_fence_reg (obj);
+
+	return 0;
+}
+
+/**
  * Finds free space in the GTT aperture and binds the object there.
  */
 static int
@@ -2800,8 +2832,7 @@ i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj)
 	/* Free the page_cpu_valid mappings which are now stale, whether
 	 * or not we've got I915_GEM_DOMAIN_CPU.
 	 */
-	drm_free(obj_priv->page_cpu_valid, obj->size / PAGE_SIZE,
-		 DRM_MEM_DRIVER);
+	kfree(obj_priv->page_cpu_valid);
 	obj_priv->page_cpu_valid = NULL;
 }
 
@@ -2843,8 +2874,8 @@ i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj,
 	 * newly adding I915_GEM_DOMAIN_CPU
 	 */
 	if (obj_priv->page_cpu_valid == NULL) {
-		obj_priv->page_cpu_valid = drm_calloc(1, obj->size / PAGE_SIZE,
-						      DRM_MEM_DRIVER);
+		obj_priv->page_cpu_valid = kzalloc(obj->size / PAGE_SIZE,
+						   GFP_KERNEL);
 		if (obj_priv->page_cpu_valid == NULL)
 			return -ENOMEM;
 	} else if ((obj->read_domains & I915_GEM_DOMAIN_CPU) == 0)
@@ -3267,8 +3298,8 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
 	}
 
 	if (args->num_cliprects != 0) {
-		cliprects = drm_calloc(args->num_cliprects, sizeof(*cliprects),
-				       DRM_MEM_DRIVER);
+		cliprects = kcalloc(args->num_cliprects, sizeof(*cliprects),
+				    GFP_KERNEL);
 		if (cliprects == NULL)
 			goto pre_mutex_err;
 
@@ -3521,8 +3552,7 @@ err:
 pre_mutex_err:
 	drm_free_large(object_list);
 	drm_free_large(exec_list);
-	drm_free(cliprects, sizeof(*cliprects) * args->num_cliprects,
-		 DRM_MEM_DRIVER);
+	kfree(cliprects);
 
 	return ret;
 }
@@ -3550,7 +3580,7 @@ i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment)
 	if (!IS_I965G(dev) &&
 	    obj_priv->fence_reg == I915_FENCE_REG_NONE &&
 	    obj_priv->tiling_mode != I915_TILING_NONE) {
-		ret = i915_gem_object_get_fence_reg(obj, true);
+		ret = i915_gem_object_get_fence_reg(obj);
 		if (ret != 0) {
 			if (ret != -EBUSY && ret != -ERESTARTSYS)
 				DRM_ERROR("Failure to install fence: %d\n",
@@ -3739,7 +3769,7 @@ int i915_gem_init_object(struct drm_gem_object *obj)
 {
 	struct drm_i915_gem_object *obj_priv;
 
-	obj_priv = drm_calloc(1, sizeof(*obj_priv), DRM_MEM_DRIVER);
+	obj_priv = kzalloc(sizeof(*obj_priv), GFP_KERNEL);
 	if (obj_priv == NULL)
 		return -ENOMEM;
 
@@ -3777,9 +3807,9 @@ void i915_gem_free_object(struct drm_gem_object *obj)
 
 	i915_gem_free_mmap_offset(obj);
 
-	drm_free(obj_priv->page_cpu_valid, 1, DRM_MEM_DRIVER);
+	kfree(obj_priv->page_cpu_valid);
 	kfree(obj_priv->bit_17);
-	drm_free(obj->driver_private, 1, DRM_MEM_DRIVER);
+	kfree(obj->driver_private);
 }
 
 /** Unbinds all objects that are on the given buffer list. */
@@ -4233,7 +4263,7 @@ int i915_gem_init_phys_object(struct drm_device *dev,
 	if (dev_priv->mm.phys_objs[id - 1] || !size)
 		return 0;
 
-	phys_obj = drm_calloc(1, sizeof(struct drm_i915_gem_phys_object), DRM_MEM_DRIVER);
+	phys_obj = kzalloc(sizeof(struct drm_i915_gem_phys_object), GFP_KERNEL);
 	if (!phys_obj)
 		return -ENOMEM;
 
@@ -4252,7 +4282,7 @@ int i915_gem_init_phys_object(struct drm_device *dev,
 
 	return 0;
 kfree_obj:
-	drm_free(phys_obj, sizeof(struct drm_i915_gem_phys_object), DRM_MEM_DRIVER);
+	kfree(phys_obj);
 	return ret;
 }
 
@@ -4312,6 +4342,8 @@ void i915_gem_detach_phys_object(struct drm_device *dev,
 	}
 	drm_clflush_pages(obj_priv->pages, page_count);
 	drm_agp_chipset_flush(dev);
+
+	i915_gem_object_put_pages(obj);
 out:
 	obj_priv->phys_obj->cur_obj = NULL;
 	obj_priv->phys_obj = NULL;
@@ -4369,6 +4401,8 @@ i915_gem_attach_phys_object(struct drm_device *dev,
 		kunmap_atomic(src, KM_USER0);
 	}
 
+	i915_gem_object_put_pages(obj);
+
 	return 0;
 out:
 	return ret;
diff --git a/drivers/gpu/drm/i915/i915_gem_debugfs.c b/drivers/gpu/drm/i915/i915_gem_debugfs.c
index 986f1082c59..28146e405e8 100644
--- a/drivers/gpu/drm/i915/i915_gem_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_gem_debugfs.c
@@ -104,7 +104,7 @@ static int i915_gem_object_list_info(struct seq_file *m, void *data)
 		if (obj->name)
 			seq_printf(m, " (name: %d)", obj->name);
 		if (obj_priv->fence_reg != I915_FENCE_REG_NONE)
-			seq_printf(m, " (fence: %d\n", obj_priv->fence_reg);
+			seq_printf(m, " (fence: %d)\n", obj_priv->fence_reg);
 		seq_printf(m, "\n");
 	}
 
@@ -318,7 +318,7 @@ static int i915_ringbuffer_info(struct seq_file *m, void *data)
 	seq_printf(m, "RingTail :  %08x\n", tail);
 	seq_printf(m, "RingMask :  %08x\n", mask);
 	seq_printf(m, "RingSize :  %08lx\n", dev_priv->ring.Size);
-	seq_printf(m, "Acthd :  %08x\n", I915_READ(IS_I965G(dev) ? ACTHD_I965 : ACTHD));
+	seq_printf(m, "Acthd :     %08x\n", I915_READ(IS_I965G(dev) ? ACTHD_I965 : ACTHD));
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index 9a05cadaa4a..5c1ceec49f5 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -408,7 +408,7 @@ i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode)
 	if (stride & (stride - 1))
 		return false;
 
-	/* We don't handle the aperture area covered by the fence being bigger
+	/* We don't 0handle the aperture area covered by the fence being bigger
 	 * than the object size.
 	 */
 	if (i915_get_fence_size(dev, size) != size)
@@ -417,6 +417,33 @@ i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode)
 	return true;
 }
 
+static bool
+i915_gem_object_fence_offset_ok(struct drm_gem_object *obj, int tiling_mode)
+{
+	struct drm_device *dev = obj->dev;
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
+	if (obj_priv->gtt_space == NULL)
+		return true;
+
+	if (tiling_mode == I915_TILING_NONE)
+		return true;
+
+	if (!IS_I965G(dev)) {
+		if (obj_priv->gtt_offset & (obj->size - 1))
+			return false;
+		if (IS_I9XX(dev)) {
+			if (obj_priv->gtt_offset & ~I915_FENCE_START_MASK)
+				return false;
+		} else {
+			if (obj_priv->gtt_offset & ~I830_FENCE_START_MASK)
+				return false;
+		}
+	}
+
+	return true;
+}
+
 /**
  * Sets the tiling mode of an object, returning the required swizzling of
  * bit 6 of addresses in the object.
@@ -429,6 +456,7 @@ i915_gem_set_tiling(struct drm_device *dev, void *data,
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct drm_gem_object *obj;
 	struct drm_i915_gem_object *obj_priv;
+	int ret = 0;
 
 	obj = drm_gem_object_lookup(dev, file_priv, args->handle);
 	if (obj == NULL)
@@ -436,14 +464,15 @@ i915_gem_set_tiling(struct drm_device *dev, void *data,
 	obj_priv = obj->driver_private;
 
 	if (!i915_tiling_ok(dev, args->stride, obj->size, args->tiling_mode)) {
+		mutex_lock(&dev->struct_mutex);
 		drm_gem_object_unreference(obj);
+		mutex_unlock(&dev->struct_mutex);
 		return -EINVAL;
 	}
 
-	mutex_lock(&dev->struct_mutex);
-
 	if (args->tiling_mode == I915_TILING_NONE) {
 		args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE;
+		args->stride = 0;
 	} else {
 		if (args->tiling_mode == I915_TILING_X)
 			args->swizzle_mode = dev_priv->mm.bit_6_swizzle_x;
@@ -466,32 +495,38 @@ i915_gem_set_tiling(struct drm_device *dev, void *data,
 		if (args->swizzle_mode == I915_BIT_6_SWIZZLE_UNKNOWN) {
 			args->tiling_mode = I915_TILING_NONE;
 			args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE;
+			args->stride = 0;
 		}
 	}
-	if (args->tiling_mode != obj_priv->tiling_mode) {
-		int ret;
 
-		/* Unbind the object, as switching tiling means we're
-		 * switching the cache organization due to fencing, probably.
+	mutex_lock(&dev->struct_mutex);
+	if (args->tiling_mode != obj_priv->tiling_mode ||
+	    args->stride != obj_priv->stride) {
+		/* We need to rebind the object if its current allocation
+		 * no longer meets the alignment restrictions for its new
+		 * tiling mode. Otherwise we can just leave it alone, but
+		 * need to ensure that any fence register is cleared.
 		 */
-		ret = i915_gem_object_unbind(obj);
+		if (!i915_gem_object_fence_offset_ok(obj, args->tiling_mode))
+		    ret = i915_gem_object_unbind(obj);
+		else
+		    ret = i915_gem_object_put_fence_reg(obj);
 		if (ret != 0) {
 			WARN(ret != -ERESTARTSYS,
-			     "failed to unbind object for tiling switch");
+			     "failed to reset object for tiling switch");
 			args->tiling_mode = obj_priv->tiling_mode;
-			mutex_unlock(&dev->struct_mutex);
-			drm_gem_object_unreference(obj);
-
-			return ret;
+			args->stride = obj_priv->stride;
+			goto err;
 		}
+
 		obj_priv->tiling_mode = args->tiling_mode;
+		obj_priv->stride = args->stride;
 	}
-	obj_priv->stride = args->stride;
-
+err:
 	drm_gem_object_unreference(obj);
 	mutex_unlock(&dev->struct_mutex);
 
-	return 0;
+	return ret;
 }
 
 /**
diff --git a/drivers/gpu/drm/i915/i915_mem.c b/drivers/gpu/drm/i915/i915_mem.c
index 96e271986d2..83b7b81bb2b 100644
--- a/drivers/gpu/drm/i915/i915_mem.c
+++ b/drivers/gpu/drm/i915/i915_mem.c
@@ -94,8 +94,8 @@ static struct mem_block *split_block(struct mem_block *p, int start, int size,
 {
 	/* Maybe cut off the start of an existing block */
 	if (start > p->start) {
-		struct mem_block *newblock =
-		    drm_alloc(sizeof(*newblock), DRM_MEM_BUFLISTS);
+		struct mem_block *newblock = kmalloc(sizeof(*newblock),
+						     GFP_KERNEL);
 		if (!newblock)
 			goto out;
 		newblock->start = start;
@@ -111,8 +111,8 @@ static struct mem_block *split_block(struct mem_block *p, int start, int size,
 
 	/* Maybe cut off the end of an existing block */
 	if (size < p->size) {
-		struct mem_block *newblock =
-		    drm_alloc(sizeof(*newblock), DRM_MEM_BUFLISTS);
+		struct mem_block *newblock = kmalloc(sizeof(*newblock),
+						     GFP_KERNEL);
 		if (!newblock)
 			goto out;
 		newblock->start = start + size;
@@ -169,7 +169,7 @@ static void free_block(struct mem_block *p)
 		p->size += q->size;
 		p->next = q->next;
 		p->next->prev = p;
-		drm_free(q, sizeof(*q), DRM_MEM_BUFLISTS);
+		kfree(q);
 	}
 
 	if (p->prev->file_priv == NULL) {
@@ -177,7 +177,7 @@ static void free_block(struct mem_block *p)
 		q->size += p->size;
 		q->next = p->next;
 		q->next->prev = q;
-		drm_free(p, sizeof(*q), DRM_MEM_BUFLISTS);
+		kfree(p);
 	}
 }
 
@@ -185,14 +185,14 @@ static void free_block(struct mem_block *p)
  */
 static int init_heap(struct mem_block **heap, int start, int size)
 {
-	struct mem_block *blocks = drm_alloc(sizeof(*blocks), DRM_MEM_BUFLISTS);
+	struct mem_block *blocks = kmalloc(sizeof(*blocks), GFP_KERNEL);
 
 	if (!blocks)
 		return -ENOMEM;
 
-	*heap = drm_alloc(sizeof(**heap), DRM_MEM_BUFLISTS);
+	*heap = kmalloc(sizeof(**heap), GFP_KERNEL);
 	if (!*heap) {
-		drm_free(blocks, sizeof(*blocks), DRM_MEM_BUFLISTS);
+		kfree(blocks);
 		return -ENOMEM;
 	}
 
@@ -233,7 +233,7 @@ void i915_mem_release(struct drm_device * dev, struct drm_file *file_priv,
 			p->size += q->size;
 			p->next = q->next;
 			p->next->prev = p;
-			drm_free(q, sizeof(*q), DRM_MEM_BUFLISTS);
+			kfree(q);
 		}
 	}
 }
@@ -250,10 +250,10 @@ void i915_mem_takedown(struct mem_block **heap)
 	for (p = (*heap)->next; p != *heap;) {
 		struct mem_block *q = p;
 		p = p->next;
-		drm_free(q, sizeof(*q), DRM_MEM_BUFLISTS);
+		kfree(q);
 	}
 
-	drm_free(*heap, sizeof(**heap), DRM_MEM_BUFLISTS);
+	kfree(*heap);
 	*heap = NULL;
 }
 
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index 754dd22fdd7..cdd126d068a 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -124,8 +124,7 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv,
 	entry = &lvds_lfp_data->data[lvds_options->panel_type];
 	dvo_timing = &entry->dvo_timing;
 
-	panel_fixed_mode = drm_calloc(1, sizeof(*panel_fixed_mode),
-				      DRM_MEM_DRIVER);
+	panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL);
 
 	fill_detail_timing_data(panel_fixed_mode, dvo_timing);
 
@@ -156,8 +155,7 @@ parse_sdvo_panel_data(struct drm_i915_private *dev_priv,
 	if (!dvo_timing)
 		return;
 
-	panel_fixed_mode = drm_calloc(1, sizeof(*panel_fixed_mode),
-				      DRM_MEM_DRIVER);
+	panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL);
 
 	if (!panel_fixed_mode)
 		return;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 028f5b66e3d..3e1c7816211 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -828,19 +828,31 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 	}
 
 	mutex_lock(&dev->struct_mutex);
-	ret = i915_gem_object_pin(intel_fb->obj, alignment);
+	ret = i915_gem_object_pin(obj, alignment);
 	if (ret != 0) {
 		mutex_unlock(&dev->struct_mutex);
 		return ret;
 	}
 
-	ret = i915_gem_object_set_to_gtt_domain(intel_fb->obj, 1);
+	ret = i915_gem_object_set_to_gtt_domain(obj, 1);
 	if (ret != 0) {
-		i915_gem_object_unpin(intel_fb->obj);
+		i915_gem_object_unpin(obj);
 		mutex_unlock(&dev->struct_mutex);
 		return ret;
 	}
 
+	/* Pre-i965 needs to install a fence for tiled scan-out */
+	if (!IS_I965G(dev) &&
+	    obj_priv->fence_reg == I915_FENCE_REG_NONE &&
+	    obj_priv->tiling_mode != I915_TILING_NONE) {
+		ret = i915_gem_object_get_fence_reg(obj);
+		if (ret != 0) {
+			i915_gem_object_unpin(obj);
+			mutex_unlock(&dev->struct_mutex);
+			return ret;
+		}
+	}
+
 	dspcntr = I915_READ(dspcntr_reg);
 	/* Mask out pixel format bits in case we change it */
 	dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
@@ -860,7 +872,7 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 		break;
 	default:
 		DRM_ERROR("Unknown color depth\n");
-		i915_gem_object_unpin(intel_fb->obj);
+		i915_gem_object_unpin(obj);
 		mutex_unlock(&dev->struct_mutex);
 		return -EINVAL;
 	}
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 8e28e5993df..1af7d68e380 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -870,7 +870,11 @@ static int intelfb_single_fb_probe(struct drm_device *dev)
  */
 void intelfb_restore(void)
 {
-	drm_crtc_helper_set_config(&kernelfb_mode);
+	int ret;
+	if ((ret = drm_crtc_helper_set_config(&kernelfb_mode)) != 0) {
+		printk(KERN_ERR "Failed to restore crtc configuration: %d\n",
+		       ret);
+	}
 }
 
 static void intelfb_restore_work_fn(struct work_struct *ignored)
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index 50d7ed70b33..ea68992e441 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1561,8 +1561,7 @@ intel_tv_destroy (struct drm_connector *connector)
 
 	drm_sysfs_connector_remove(connector);
 	drm_connector_cleanup(connector);
-	drm_free(intel_output, sizeof(struct intel_output) + sizeof(struct intel_tv_priv),
-		 DRM_MEM_DRIVER);
+	kfree(intel_output);
 }
 
 
@@ -1695,8 +1694,8 @@ intel_tv_init(struct drm_device *dev)
 	    (tv_dac_off & TVDAC_STATE_CHG_EN) != 0)
 		return;
 
-	intel_output = drm_calloc(1, sizeof(struct intel_output) +
-				  sizeof(struct intel_tv_priv), DRM_MEM_DRIVER);
+	intel_output = kzalloc(sizeof(struct intel_output) +
+			       sizeof(struct intel_tv_priv), GFP_KERNEL);
 	if (!intel_output) {
 		return;
 	}
@@ -1730,8 +1729,8 @@ intel_tv_init(struct drm_device *dev)
 	connector->doublescan_allowed = false;
 
 	/* Create TV properties then attach current values */
-	tv_format_names = drm_alloc(sizeof(char *) * NUM_TV_MODES,
-				    DRM_MEM_DRIVER);
+	tv_format_names = kmalloc(sizeof(char *) * NUM_TV_MODES,
+				  GFP_KERNEL);
 	if (!tv_format_names)
 		goto out;
 	for (i = 0; i < NUM_TV_MODES; i++)
diff --git a/drivers/gpu/drm/mga/mga_dma.c b/drivers/gpu/drm/mga/mga_dma.c
index 7a6bf9ffc5a..6c67a02910c 100644
--- a/drivers/gpu/drm/mga/mga_dma.c
+++ b/drivers/gpu/drm/mga/mga_dma.c
@@ -254,23 +254,20 @@ static int mga_freelist_init(struct drm_device * dev, drm_mga_private_t * dev_pr
 	int i;
 	DRM_DEBUG("count=%d\n", dma->buf_count);
 
-	dev_priv->head = drm_alloc(sizeof(drm_mga_freelist_t), DRM_MEM_DRIVER);
+	dev_priv->head = kzalloc(sizeof(drm_mga_freelist_t), GFP_KERNEL);
 	if (dev_priv->head == NULL)
 		return -ENOMEM;
 
-	memset(dev_priv->head, 0, sizeof(drm_mga_freelist_t));
 	SET_AGE(&dev_priv->head->age, MGA_BUFFER_USED, 0);
 
 	for (i = 0; i < dma->buf_count; i++) {
 		buf = dma->buflist[i];
 		buf_priv = buf->dev_private;
 
-		entry = drm_alloc(sizeof(drm_mga_freelist_t), DRM_MEM_DRIVER);
+		entry = kzalloc(sizeof(drm_mga_freelist_t), GFP_KERNEL);
 		if (entry == NULL)
 			return -ENOMEM;
 
-		memset(entry, 0, sizeof(drm_mga_freelist_t));
-
 		entry->next = dev_priv->head->next;
 		entry->prev = dev_priv->head;
 		SET_AGE(&entry->age, MGA_BUFFER_FREE, 0);
@@ -301,7 +298,7 @@ static void mga_freelist_cleanup(struct drm_device * dev)
 	entry = dev_priv->head;
 	while (entry) {
 		next = entry->next;
-		drm_free(entry, sizeof(drm_mga_freelist_t), DRM_MEM_DRIVER);
+		kfree(entry);
 		entry = next;
 	}
 
@@ -399,12 +396,11 @@ int mga_driver_load(struct drm_device * dev, unsigned long flags)
 	drm_mga_private_t *dev_priv;
 	int ret;
 
-	dev_priv = drm_alloc(sizeof(drm_mga_private_t), DRM_MEM_DRIVER);
+	dev_priv = kzalloc(sizeof(drm_mga_private_t), GFP_KERNEL);
 	if (!dev_priv)
 		return -ENOMEM;
 
 	dev->dev_private = (void *)dev_priv;
-	memset(dev_priv, 0, sizeof(drm_mga_private_t));
 
 	dev_priv->usec_timeout = MGA_DEFAULT_USEC_TIMEOUT;
 	dev_priv->chipset = flags;
@@ -1150,7 +1146,7 @@ int mga_dma_buffers(struct drm_device *dev, void *data,
  */
 int mga_driver_unload(struct drm_device * dev)
 {
-	drm_free(dev->dev_private, sizeof(drm_mga_private_t), DRM_MEM_DRIVER);
+	kfree(dev->dev_private);
 	dev->dev_private = NULL;
 
 	return 0;
diff --git a/drivers/gpu/drm/r128/r128_cce.c b/drivers/gpu/drm/r128/r128_cce.c
index 077c0455a6b..c75fd356404 100644
--- a/drivers/gpu/drm/r128/r128_cce.c
+++ b/drivers/gpu/drm/r128/r128_cce.c
@@ -353,12 +353,10 @@ static int r128_do_init_cce(struct drm_device * dev, drm_r128_init_t * init)
 
 	DRM_DEBUG("\n");
 
-	dev_priv = drm_alloc(sizeof(drm_r128_private_t), DRM_MEM_DRIVER);
+	dev_priv = kzalloc(sizeof(drm_r128_private_t), GFP_KERNEL);
 	if (dev_priv == NULL)
 		return -ENOMEM;
 
-	memset(dev_priv, 0, sizeof(drm_r128_private_t));
-
 	dev_priv->is_pci = init->is_pci;
 
 	if (dev_priv->is_pci && !dev->sg) {
@@ -619,8 +617,7 @@ int r128_do_cleanup_cce(struct drm_device * dev)
 					    ("failed to cleanup PCI GART!\n");
 		}
 
-		drm_free(dev->dev_private, sizeof(drm_r128_private_t),
-			 DRM_MEM_DRIVER);
+		kfree(dev->dev_private);
 		dev->dev_private = NULL;
 	}
 
@@ -768,18 +765,17 @@ static int r128_freelist_init(struct drm_device * dev)
 	drm_r128_freelist_t *entry;
 	int i;
 
-	dev_priv->head = drm_alloc(sizeof(drm_r128_freelist_t), DRM_MEM_DRIVER);
+	dev_priv->head = kzalloc(sizeof(drm_r128_freelist_t), GFP_KERNEL);
 	if (dev_priv->head == NULL)
 		return -ENOMEM;
 
-	memset(dev_priv->head, 0, sizeof(drm_r128_freelist_t));
 	dev_priv->head->age = R128_BUFFER_USED;
 
 	for (i = 0; i < dma->buf_count; i++) {
 		buf = dma->buflist[i];
 		buf_priv = buf->dev_private;
 
-		entry = drm_alloc(sizeof(drm_r128_freelist_t), DRM_MEM_DRIVER);
+		entry = kmalloc(sizeof(drm_r128_freelist_t), GFP_KERNEL);
 		if (!entry)
 			return -ENOMEM;
 
diff --git a/drivers/gpu/drm/r128/r128_state.c b/drivers/gpu/drm/r128/r128_state.c
index f7a5b574076..026a48c95c8 100644
--- a/drivers/gpu/drm/r128/r128_state.c
+++ b/drivers/gpu/drm/r128/r128_state.c
@@ -910,24 +910,24 @@ static int r128_cce_dispatch_write_span(struct drm_device * dev,
 	}
 
 	buffer_size = depth->n * sizeof(u32);
-	buffer = drm_alloc(buffer_size, DRM_MEM_BUFS);
+	buffer = kmalloc(buffer_size, GFP_KERNEL);
 	if (buffer == NULL)
 		return -ENOMEM;
 	if (DRM_COPY_FROM_USER(buffer, depth->buffer, buffer_size)) {
-		drm_free(buffer, buffer_size, DRM_MEM_BUFS);
+		kfree(buffer);
 		return -EFAULT;
 	}
 
 	mask_size = depth->n * sizeof(u8);
 	if (depth->mask) {
-		mask = drm_alloc(mask_size, DRM_MEM_BUFS);
+		mask = kmalloc(mask_size, GFP_KERNEL);
 		if (mask == NULL) {
-			drm_free(buffer, buffer_size, DRM_MEM_BUFS);
+			kfree(buffer);
 			return -ENOMEM;
 		}
 		if (DRM_COPY_FROM_USER(mask, depth->mask, mask_size)) {
-			drm_free(buffer, buffer_size, DRM_MEM_BUFS);
-			drm_free(mask, mask_size, DRM_MEM_BUFS);
+			kfree(buffer);
+			kfree(mask);
 			return -EFAULT;
 		}
 
@@ -954,7 +954,7 @@ static int r128_cce_dispatch_write_span(struct drm_device * dev,
 			}
 		}
 
-		drm_free(mask, mask_size, DRM_MEM_BUFS);
+		kfree(mask);
 	} else {
 		for (i = 0; i < count; i++, x++) {
 			BEGIN_RING(6);
@@ -978,7 +978,7 @@ static int r128_cce_dispatch_write_span(struct drm_device * dev,
 		}
 	}
 
-	drm_free(buffer, buffer_size, DRM_MEM_BUFS);
+	kfree(buffer);
 
 	return 0;
 }
@@ -1000,54 +1000,54 @@ static int r128_cce_dispatch_write_pixels(struct drm_device * dev,
 
 	xbuf_size = count * sizeof(*x);
 	ybuf_size = count * sizeof(*y);
-	x = drm_alloc(xbuf_size, DRM_MEM_BUFS);
+	x = kmalloc(xbuf_size, GFP_KERNEL);
 	if (x == NULL) {
 		return -ENOMEM;
 	}
-	y = drm_alloc(ybuf_size, DRM_MEM_BUFS);
+	y = kmalloc(ybuf_size, GFP_KERNEL);
 	if (y == NULL) {
-		drm_free(x, xbuf_size, DRM_MEM_BUFS);
+		kfree(x);
 		return -ENOMEM;
 	}
 	if (DRM_COPY_FROM_USER(x, depth->x, xbuf_size)) {
-		drm_free(x, xbuf_size, DRM_MEM_BUFS);
-		drm_free(y, ybuf_size, DRM_MEM_BUFS);
+		kfree(x);
+		kfree(y);
 		return -EFAULT;
 	}
 	if (DRM_COPY_FROM_USER(y, depth->y, xbuf_size)) {
-		drm_free(x, xbuf_size, DRM_MEM_BUFS);
-		drm_free(y, ybuf_size, DRM_MEM_BUFS);
+		kfree(x);
+		kfree(y);
 		return -EFAULT;
 	}
 
 	buffer_size = depth->n * sizeof(u32);
-	buffer = drm_alloc(buffer_size, DRM_MEM_BUFS);
+	buffer = kmalloc(buffer_size, GFP_KERNEL);
 	if (buffer == NULL) {
-		drm_free(x, xbuf_size, DRM_MEM_BUFS);
-		drm_free(y, ybuf_size, DRM_MEM_BUFS);
+		kfree(x);
+		kfree(y);
 		return -ENOMEM;
 	}
 	if (DRM_COPY_FROM_USER(buffer, depth->buffer, buffer_size)) {
-		drm_free(x, xbuf_size, DRM_MEM_BUFS);
-		drm_free(y, ybuf_size, DRM_MEM_BUFS);
-		drm_free(buffer, buffer_size, DRM_MEM_BUFS);
+		kfree(x);
+		kfree(y);
+		kfree(buffer);
 		return -EFAULT;
 	}
 
 	if (depth->mask) {
 		mask_size = depth->n * sizeof(u8);
-		mask = drm_alloc(mask_size, DRM_MEM_BUFS);
+		mask = kmalloc(mask_size, GFP_KERNEL);
 		if (mask == NULL) {
-			drm_free(x, xbuf_size, DRM_MEM_BUFS);
-			drm_free(y, ybuf_size, DRM_MEM_BUFS);
-			drm_free(buffer, buffer_size, DRM_MEM_BUFS);
+			kfree(x);
+			kfree(y);
+			kfree(buffer);
 			return -ENOMEM;
 		}
 		if (DRM_COPY_FROM_USER(mask, depth->mask, mask_size)) {
-			drm_free(x, xbuf_size, DRM_MEM_BUFS);
-			drm_free(y, ybuf_size, DRM_MEM_BUFS);
-			drm_free(buffer, buffer_size, DRM_MEM_BUFS);
-			drm_free(mask, mask_size, DRM_MEM_BUFS);
+			kfree(x);
+			kfree(y);
+			kfree(buffer);
+			kfree(mask);
 			return -EFAULT;
 		}
 
@@ -1074,7 +1074,7 @@ static int r128_cce_dispatch_write_pixels(struct drm_device * dev,
 			}
 		}
 
-		drm_free(mask, mask_size, DRM_MEM_BUFS);
+		kfree(mask);
 	} else {
 		for (i = 0; i < count; i++) {
 			BEGIN_RING(6);
@@ -1098,9 +1098,9 @@ static int r128_cce_dispatch_write_pixels(struct drm_device * dev,
 		}
 	}
 
-	drm_free(x, xbuf_size, DRM_MEM_BUFS);
-	drm_free(y, ybuf_size, DRM_MEM_BUFS);
-	drm_free(buffer, buffer_size, DRM_MEM_BUFS);
+	kfree(x);
+	kfree(y);
+	kfree(buffer);
 
 	return 0;
 }
@@ -1167,23 +1167,23 @@ static int r128_cce_dispatch_read_pixels(struct drm_device * dev,
 
 	xbuf_size = count * sizeof(*x);
 	ybuf_size = count * sizeof(*y);
-	x = drm_alloc(xbuf_size, DRM_MEM_BUFS);
+	x = kmalloc(xbuf_size, GFP_KERNEL);
 	if (x == NULL) {
 		return -ENOMEM;
 	}
-	y = drm_alloc(ybuf_size, DRM_MEM_BUFS);
+	y = kmalloc(ybuf_size, GFP_KERNEL);
 	if (y == NULL) {
-		drm_free(x, xbuf_size, DRM_MEM_BUFS);
+		kfree(x);
 		return -ENOMEM;
 	}
 	if (DRM_COPY_FROM_USER(x, depth->x, xbuf_size)) {
-		drm_free(x, xbuf_size, DRM_MEM_BUFS);
-		drm_free(y, ybuf_size, DRM_MEM_BUFS);
+		kfree(x);
+		kfree(y);
 		return -EFAULT;
 	}
 	if (DRM_COPY_FROM_USER(y, depth->y, ybuf_size)) {
-		drm_free(x, xbuf_size, DRM_MEM_BUFS);
-		drm_free(y, ybuf_size, DRM_MEM_BUFS);
+		kfree(x);
+		kfree(y);
 		return -EFAULT;
 	}
 
@@ -1210,8 +1210,8 @@ static int r128_cce_dispatch_read_pixels(struct drm_device * dev,
 		ADVANCE_RING();
 	}
 
-	drm_free(x, xbuf_size, DRM_MEM_BUFS);
-	drm_free(y, ybuf_size, DRM_MEM_BUFS);
+	kfree(x);
+	kfree(y);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index 5225f5be7ea..c550932a108 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -551,6 +551,9 @@ int r100_cp_init(struct radeon_device *rdev, unsigned ring_size)
 	/* cp setup */
 	WREG32(0x718, pre_write_timer | (pre_write_limit << 28));
 	WREG32(RADEON_CP_RB_CNTL,
+#ifdef __BIG_ENDIAN
+	       RADEON_BUF_SWAP_32BIT |
+#endif
 	       REG_SET(RADEON_RB_BUFSZ, rb_bufsz) |
 	       REG_SET(RADEON_RB_BLKSZ, rb_blksz) |
 	       REG_SET(RADEON_MAX_FETCH, max_fetch) |
@@ -644,7 +647,7 @@ int r100_cp_reset(struct radeon_device *rdev)
  */
 int r100_cs_parse_packet0(struct radeon_cs_parser *p,
 			  struct radeon_cs_packet *pkt,
-			  unsigned *auth, unsigned n,
+			  const unsigned *auth, unsigned n,
 			  radeon_packet0_check_t check)
 {
 	unsigned reg;
@@ -654,6 +657,10 @@ int r100_cs_parse_packet0(struct radeon_cs_parser *p,
 
 	idx = pkt->idx + 1;
 	reg = pkt->reg;
+	/* Check that register fall into register range
+	 * determined by the number of entry (n) in the
+	 * safe register bitmap.
+	 */
 	if (pkt->one_reg_wr) {
 		if ((reg >> 7) > n) {
 			return -EINVAL;
@@ -683,24 +690,6 @@ int r100_cs_parse_packet0(struct radeon_cs_parser *p,
 	return 0;
 }
 
-int r100_cs_parse_packet3(struct radeon_cs_parser *p,
-			  struct radeon_cs_packet *pkt,
-			  unsigned *auth, unsigned n,
-			  radeon_packet3_check_t check)
-{
-	unsigned i, m;
-
-	if ((pkt->opcode >> 5) > n) {
-		return -EINVAL;
-	}
-	i = pkt->opcode >> 5;
-	m = 1 << (pkt->opcode & 31);
-	if (auth[i] & m) {
-		return check(p, pkt);
-	}
-	return 0;
-}
-
 void r100_cs_dump_packet(struct radeon_cs_parser *p,
 			 struct radeon_cs_packet *pkt)
 {
@@ -901,6 +890,25 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
 	return 0;
 }
 
+int r100_cs_track_check_pkt3_indx_buffer(struct radeon_cs_parser *p,
+					 struct radeon_cs_packet *pkt,
+					 struct radeon_object *robj)
+{
+	struct radeon_cs_chunk *ib_chunk;
+	unsigned idx;
+
+	ib_chunk = &p->chunks[p->chunk_ib_idx];
+	idx = pkt->idx + 1;
+	if ((ib_chunk->kdata[idx+2] + 1) > radeon_object_size(robj)) {
+		DRM_ERROR("[drm] Buffer too small for PACKET3 INDX_BUFFER "
+			  "(need %u have %lu) !\n",
+			  ib_chunk->kdata[idx+2] + 1,
+			  radeon_object_size(robj));
+		return -EINVAL;
+	}
+	return 0;
+}
+
 static int r100_packet3_check(struct radeon_cs_parser *p,
 			      struct radeon_cs_packet *pkt)
 {
@@ -954,6 +962,10 @@ static int r100_packet3_check(struct radeon_cs_parser *p,
 			return r;
 		}
 		ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
+		r = r100_cs_track_check_pkt3_indx_buffer(p, pkt, reloc->robj);
+		if (r) {
+			return r;
+		}
 		break;
 	case 0x23:
 		/* FIXME: cleanup */
@@ -999,18 +1011,18 @@ int r100_cs_parse(struct radeon_cs_parser *p)
 		}
 		p->idx += pkt.count + 2;
 		switch (pkt.type) {
-		case PACKET_TYPE0:
-			r = r100_packet0_check(p, &pkt);
-			break;
-		case PACKET_TYPE2:
-			break;
-		case PACKET_TYPE3:
-			r = r100_packet3_check(p, &pkt);
-			break;
-		default:
-			DRM_ERROR("Unknown packet type %d !\n",
-					pkt.type);
-			return -EINVAL;
+			case PACKET_TYPE0:
+				r = r100_packet0_check(p, &pkt);
+				break;
+			case PACKET_TYPE2:
+				break;
+			case PACKET_TYPE3:
+				r = r100_packet3_check(p, &pkt);
+				break;
+			default:
+				DRM_ERROR("Unknown packet type %d !\n",
+					  pkt.type);
+				return -EINVAL;
 		}
 		if (r) {
 			return r;
@@ -1267,12 +1279,6 @@ void r100_vram_info(struct radeon_device *rdev)
 
 	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
 	rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
-	if (rdev->mc.aper_size > rdev->mc.vram_size) {
-		/* Why does some hw doesn't have CONFIG_MEMSIZE properly
-		 * setup ? */
-		rdev->mc.vram_size = rdev->mc.aper_size;
-		WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
-	}
 }
 
 
@@ -1352,6 +1358,11 @@ void r100_mm_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
 	}
 }
 
+int r100_init(struct radeon_device *rdev)
+{
+	return 0;
+}
+
 /*
  * Debugfs info
  */
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index f5870a099d4..e2ed5bc0817 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -48,14 +48,13 @@ int r100_cs_packet_next_reloc(struct radeon_cs_parser *p,
 			      struct radeon_cs_reloc **cs_reloc);
 int r100_cs_parse_packet0(struct radeon_cs_parser *p,
 			  struct radeon_cs_packet *pkt,
-			  unsigned *auth, unsigned n,
+			  const unsigned *auth, unsigned n,
 			  radeon_packet0_check_t check);
-int r100_cs_parse_packet3(struct radeon_cs_parser *p,
-			  struct radeon_cs_packet *pkt,
-			  unsigned *auth, unsigned n,
-			  radeon_packet3_check_t check);
 void r100_cs_dump_packet(struct radeon_cs_parser *p,
 			 struct radeon_cs_packet *pkt);
+int r100_cs_track_check_pkt3_indx_buffer(struct radeon_cs_parser *p,
+					 struct radeon_cs_packet *pkt,
+					 struct radeon_object *robj);
 
 /* This files gather functions specifics to:
  * r300,r350,rv350,rv370,rv380
@@ -288,7 +287,7 @@ int r300_copy_dma(struct radeon_device *rdev,
 		return r;
 	}
 	/* Must wait for 2D idle & clean before DMA or hangs might happen */
-	radeon_ring_write(rdev, PACKET0(RADEON_WAIT_UNTIL, 0));
+	radeon_ring_write(rdev, PACKET0(RADEON_WAIT_UNTIL, 0 ));
 	radeon_ring_write(rdev, (1 << 16));
 	for (i = 0; i < num_loops; i++) {
 		cur_size = size;
@@ -319,7 +318,7 @@ void r300_ring_start(struct radeon_device *rdev)
 
 	/* Sub pixel 1/12 so we can have 4K rendering according to doc */
 	gb_tile_config = (R300_ENABLE_TILING | R300_TILE_SIZE_16);
-	switch (rdev->num_gb_pipes) {
+	switch(rdev->num_gb_pipes) {
 	case 2:
 		gb_tile_config |= R300_PIPE_COUNT_R300;
 		break;
@@ -452,8 +451,8 @@ void r300_gpu_init(struct radeon_device *rdev)
 	case 4:
 		gb_tile_config |= R300_PIPE_COUNT_R420;
 		break;
-	case 1:
 	default:
+	case 1:
 		gb_tile_config |= R300_PIPE_COUNT_RV350;
 		break;
 	}
@@ -725,18 +724,120 @@ struct r300_cs_track_cb {
 	unsigned		offset;
 };
 
+struct r300_cs_track_array {
+	struct radeon_object	*robj;
+	unsigned		esize;
+};
+
+struct r300_cs_track_texture {
+	struct radeon_object	*robj;
+	unsigned		pitch;
+	unsigned		width;
+	unsigned		height;
+	unsigned		num_levels;
+	unsigned		cpp;
+	unsigned		tex_coord_type;
+	unsigned		txdepth;
+	unsigned		width_11;
+	unsigned		height_11;
+	bool			use_pitch;
+	bool			enabled;
+	bool			roundup_w;
+	bool			roundup_h;
+};
+
 struct r300_cs_track {
-	unsigned		num_cb;
-	unsigned		maxy;
-	struct r300_cs_track_cb cb[4];
-	struct r300_cs_track_cb zb;
-	bool			z_enabled;
+	unsigned			num_cb;
+	unsigned			maxy;
+	unsigned			vtx_size;
+	unsigned			vap_vf_cntl;
+	unsigned			immd_dwords;
+	unsigned			num_arrays;
+	unsigned			max_indx;
+	struct r300_cs_track_array	arrays[11];
+	struct r300_cs_track_cb 	cb[4];
+	struct r300_cs_track_cb 	zb;
+	struct r300_cs_track_texture	textures[16];
+	bool				z_enabled;
 };
 
+static inline void r300_cs_track_texture_print(struct r300_cs_track_texture *t)
+{
+	DRM_ERROR("pitch                      %d\n", t->pitch);
+	DRM_ERROR("width                      %d\n", t->width);
+	DRM_ERROR("height                     %d\n", t->height);
+	DRM_ERROR("num levels                 %d\n", t->num_levels);
+	DRM_ERROR("depth                      %d\n", t->txdepth);
+	DRM_ERROR("bpp                        %d\n", t->cpp);
+	DRM_ERROR("coordinate type            %d\n", t->tex_coord_type);
+	DRM_ERROR("width round to power of 2  %d\n", t->roundup_w);
+	DRM_ERROR("height round to power of 2 %d\n", t->roundup_h);
+}
+
+static inline int r300_cs_track_texture_check(struct radeon_device *rdev,
+					      struct r300_cs_track *track)
+{
+	struct radeon_object *robj;
+	unsigned long size;
+	unsigned u, i, w, h;
+
+	for (u = 0; u < 16; u++) {
+		if (!track->textures[u].enabled)
+			continue;
+		robj = track->textures[u].robj;
+		if (robj == NULL) {
+			DRM_ERROR("No texture bound to unit %u\n", u);
+			return -EINVAL;
+		}
+		size = 0;
+		for (i = 0; i <= track->textures[u].num_levels; i++) {
+			if (track->textures[u].use_pitch) {
+				w = track->textures[u].pitch / (1 << i);
+			} else {
+				w = track->textures[u].width / (1 << i);
+				if (rdev->family >= CHIP_RV515)
+					w |= track->textures[u].width_11;
+				if (track->textures[u].roundup_w)
+					w = roundup_pow_of_two(w);
+			}
+			h = track->textures[u].height / (1 << i);
+			if (rdev->family >= CHIP_RV515)
+				h |= track->textures[u].height_11;
+			if (track->textures[u].roundup_h)
+				h = roundup_pow_of_two(h);
+			size += w * h;
+		}
+		size *= track->textures[u].cpp;
+		switch (track->textures[u].tex_coord_type) {
+		case 0:
+			break;
+		case 1:
+			size *= (1 << track->textures[u].txdepth);
+			break;
+		case 2:
+			size *= 6;
+			break;
+		default:
+			DRM_ERROR("Invalid texture coordinate type %u for unit "
+				  "%u\n", track->textures[u].tex_coord_type, u);
+			return -EINVAL;
+		}
+		if (size > radeon_object_size(robj)) {
+			DRM_ERROR("Texture of unit %u needs %lu bytes but is "
+				  "%lu\n", u, size, radeon_object_size(robj));
+			r300_cs_track_texture_print(&track->textures[u]);
+			return -EINVAL;
+		}
+	}
+	return 0;
+}
+
 int r300_cs_track_check(struct radeon_device *rdev, struct r300_cs_track *track)
 {
 	unsigned i;
 	unsigned long size;
+	unsigned prim_walk;
+	unsigned nverts;
 
 	for (i = 0; i < track->num_cb; i++) {
 		if (track->cb[i].robj == NULL) {
@@ -769,7 +870,59 @@ int r300_cs_track_check(struct radeon_device *rdev, struct r300_cs_track *track)
 			return -EINVAL;
 		}
 	}
-	return 0;
+	prim_walk = (track->vap_vf_cntl >> 4) & 0x3;
+	nverts = (track->vap_vf_cntl >> 16) & 0xFFFF;
+	switch (prim_walk) {
+	case 1:
+		for (i = 0; i < track->num_arrays; i++) {
+			size = track->arrays[i].esize * track->max_indx * 4;
+			if (track->arrays[i].robj == NULL) {
+				DRM_ERROR("(PW %u) Vertex array %u no buffer "
+					  "bound\n", prim_walk, i);
+				return -EINVAL;
+			}
+			if (size > radeon_object_size(track->arrays[i].robj)) {
+				DRM_ERROR("(PW %u) Vertex array %u need %lu dwords "
+					   "have %lu dwords\n", prim_walk, i,
+					   size >> 2,
+					   radeon_object_size(track->arrays[i].robj) >> 2);
+				DRM_ERROR("Max indices %u\n", track->max_indx);
+				return -EINVAL;
+			}
+		}
+		break;
+	case 2:
+		for (i = 0; i < track->num_arrays; i++) {
+			size = track->arrays[i].esize * (nverts - 1) * 4;
+			if (track->arrays[i].robj == NULL) {
+				DRM_ERROR("(PW %u) Vertex array %u no buffer "
+					  "bound\n", prim_walk, i);
+				return -EINVAL;
+			}
+			if (size > radeon_object_size(track->arrays[i].robj)) {
+				DRM_ERROR("(PW %u) Vertex array %u need %lu dwords "
+					   "have %lu dwords\n", prim_walk, i, size >> 2,
+					   radeon_object_size(track->arrays[i].robj) >> 2);
+				return -EINVAL;
+			}
+		}
+		break;
+	case 3:
+		size = track->vtx_size * nverts;
+		if (size != track->immd_dwords) {
+			DRM_ERROR("IMMD draw %u dwors but needs %lu dwords\n",
+				  track->immd_dwords, size);
+			DRM_ERROR("VAP_VF_CNTL.NUM_VERTICES %u, VTX_SIZE %u\n",
+				  nverts, track->vtx_size);
+			return -EINVAL;
+		}
+		break;
+	default:
+		DRM_ERROR("[drm] Invalid primitive walk %d for VAP_VF_CNTL\n",
+			  prim_walk);
+		return -EINVAL;
+	}
+	return r300_cs_track_texture_check(rdev, track);
 }
 
 static inline void r300_cs_track_clear(struct r300_cs_track *track)
@@ -789,9 +942,33 @@ static inline void r300_cs_track_clear(struct r300_cs_track *track)
 	track->zb.pitch = 8192;
 	track->zb.cpp = 4;
 	track->zb.offset = 0;
+	track->vtx_size = 0x7F;
+	track->immd_dwords = 0xFFFFFFFFUL;
+	track->num_arrays = 11;
+	track->max_indx = 0x00FFFFFFUL;
+	for (i = 0; i < track->num_arrays; i++) {
+		track->arrays[i].robj = NULL;
+		track->arrays[i].esize = 0x7F;
+	}
+	for (i = 0; i < 16; i++) {
+		track->textures[i].pitch = 16536;
+		track->textures[i].width = 16536;
+		track->textures[i].height = 16536;
+		track->textures[i].width_11 = 1 << 11;
+		track->textures[i].height_11 = 1 << 11;
+		track->textures[i].num_levels = 12;
+		track->textures[i].txdepth = 16;
+		track->textures[i].cpp = 64;
+		track->textures[i].tex_coord_type = 1;
+		track->textures[i].robj = NULL;
+		/* CS IB emission code makes sure texture unit are disabled */
+		track->textures[i].enabled = false;
+		track->textures[i].roundup_w = true;
+		track->textures[i].roundup_h = true;
+	}
 }
 
-static unsigned r300_auth_reg[] = {
+static const unsigned r300_reg_safe_bm[159] = {
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
 	0xFFFFFFBF, 0xFFFFFFFF, 0xFFFFFFBF, 0xFFFFFFFF,
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
@@ -808,7 +985,7 @@ static unsigned r300_auth_reg[] = {
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFF03F,
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-	0xFFFFFFFF, 0xFFFFCFCC, 0xF00E9FFF, 0x007C0000,
+	0xFFFFFFFF, 0xFFFFEFCE, 0xF00EBFFF, 0x007C0000,
 	0xF0000078, 0xFF000009, 0xFFFFFFFF, 0xFFFFFFFF,
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
@@ -824,9 +1001,9 @@ static unsigned r300_auth_reg[] = {
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-	0xFFFFFC78, 0xFFFFFFFF, 0xFFFFFFFC, 0xFFFFFFFF,
+	0xFFFFFC78, 0xFFFFFFFF, 0xFFFFFFFE, 0xFFFFFFFF,
 	0x38FF8F50, 0xFFF88082, 0xF000000C, 0xFAE009FF,
-	0x00000000, 0x00000000, 0xFFFF0000, 0x00000000,
+	0x0000FFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000,
 	0x00000000, 0x0000C100, 0x00000000, 0x00000000,
 	0x00000000, 0x00000000, 0x00000000, 0x00000000,
 	0x00000000, 0xFFFF0000, 0xFFFFFFFF, 0xFF80FFFF,
@@ -848,8 +1025,8 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 
 	ib = p->ib->ptr;
 	ib_chunk = &p->chunks[p->chunk_ib_idx];
-	track = (struct r300_cs_track *)p->track;
-	switch (reg) {
+	track = (struct r300_cs_track*)p->track;
+	switch(reg) {
 	case RADEON_DST_PITCH_OFFSET:
 	case RADEON_SRC_PITCH_OFFSET:
 		r = r100_cs_packet_next_reloc(p, &reloc);
@@ -907,6 +1084,7 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 	case R300_TX_OFFSET_0+52:
 	case R300_TX_OFFSET_0+56:
 	case R300_TX_OFFSET_0+60:
+		i = (reg - R300_TX_OFFSET_0) >> 2;
 		r = r100_cs_packet_next_reloc(p, &reloc);
 		if (r) {
 			DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
@@ -915,11 +1093,23 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 			return r;
 		}
 		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->textures[i].robj = reloc->robj;
 		break;
 	/* Tracked registers */
+	case 0x2084:
+		/* VAP_VF_CNTL */
+		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		break;
+	case 0x20B4:
+		/* VAP_VTX_SIZE */
+		track->vtx_size = ib_chunk->kdata[idx] & 0x7F;
+		break;
+	case 0x2134:
+		/* VAP_VF_MAX_VTX_INDX */
+		track->max_indx = ib_chunk->kdata[idx] & 0x00FFFFFFUL;
+		break;
 	case 0x43E4:
 		/* SC_SCISSOR1 */
-
 		track->maxy = ((ib_chunk->kdata[idx] >> 13) & 0x1FFF) + 1;
 		if (p->rdev->family < CHIP_RV515) {
 			track->maxy -= 1440;
@@ -994,8 +1184,166 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 		/* ZB_DEPTHPITCH */
 		track->zb.pitch = ib_chunk->kdata[idx] & 0x3FFC;
 		break;
+	case 0x4104:
+		for (i = 0; i < 16; i++) {
+			bool enabled;
+
+			enabled = !!(ib_chunk->kdata[idx] & (1 << i));
+			track->textures[i].enabled = enabled;
+		}
+		break;
+	case 0x44C0:
+	case 0x44C4:
+	case 0x44C8:
+	case 0x44CC:
+	case 0x44D0:
+	case 0x44D4:
+	case 0x44D8:
+	case 0x44DC:
+	case 0x44E0:
+	case 0x44E4:
+	case 0x44E8:
+	case 0x44EC:
+	case 0x44F0:
+	case 0x44F4:
+	case 0x44F8:
+	case 0x44FC:
+		/* TX_FORMAT1_[0-15] */
+		i = (reg - 0x44C0) >> 2;
+		tmp = (ib_chunk->kdata[idx] >> 25) & 0x3;
+		track->textures[i].tex_coord_type = tmp;
+		switch ((ib_chunk->kdata[idx] & 0x1F)) {
+		case 0:
+		case 2:
+		case 5:
+		case 18:
+		case 20:
+		case 21:
+			track->textures[i].cpp = 1;
+			break;
+		case 1:
+		case 3:
+		case 6:
+		case 7:
+		case 10:
+		case 11:
+		case 19:
+		case 22:
+		case 24:
+			track->textures[i].cpp = 2;
+			break;
+		case 4:
+		case 8:
+		case 9:
+		case 12:
+		case 13:
+		case 23:
+		case 25:
+		case 27:
+		case 30:
+			track->textures[i].cpp = 4;
+			break;
+		case 14:
+		case 26:
+		case 28:
+			track->textures[i].cpp = 8;
+			break;
+		case 29:
+			track->textures[i].cpp = 16;
+			break;
+		default:
+			DRM_ERROR("Invalid texture format %u\n",
+				  (ib_chunk->kdata[idx] & 0x1F));
+			return -EINVAL;
+			break;
+		}
+		break;
+	case 0x4400:
+	case 0x4404:
+	case 0x4408:
+	case 0x440C:
+	case 0x4410:
+	case 0x4414:
+	case 0x4418:
+	case 0x441C:
+	case 0x4420:
+	case 0x4424:
+	case 0x4428:
+	case 0x442C:
+	case 0x4430:
+	case 0x4434:
+	case 0x4438:
+	case 0x443C:
+		/* TX_FILTER0_[0-15] */
+		i = (reg - 0x4400) >> 2;
+		tmp = ib_chunk->kdata[idx] & 0x7;;
+		if (tmp == 2 || tmp == 4 || tmp == 6) {
+			track->textures[i].roundup_w = false;
+		}
+		tmp = (ib_chunk->kdata[idx] >> 3) & 0x7;;
+		if (tmp == 2 || tmp == 4 || tmp == 6) {
+			track->textures[i].roundup_h = false;
+		}
+		break;
+	case 0x4500:
+	case 0x4504:
+	case 0x4508:
+	case 0x450C:
+	case 0x4510:
+	case 0x4514:
+	case 0x4518:
+	case 0x451C:
+	case 0x4520:
+	case 0x4524:
+	case 0x4528:
+	case 0x452C:
+	case 0x4530:
+	case 0x4534:
+	case 0x4538:
+	case 0x453C:
+		/* TX_FORMAT2_[0-15] */
+		i = (reg - 0x4500) >> 2;
+		tmp = ib_chunk->kdata[idx] & 0x3FFF;
+		track->textures[i].pitch = tmp + 1;
+		if (p->rdev->family >= CHIP_RV515) {
+			tmp = ((ib_chunk->kdata[idx] >> 15) & 1) << 11;
+			track->textures[i].width_11 = tmp;
+			tmp = ((ib_chunk->kdata[idx] >> 16) & 1) << 11;
+			track->textures[i].height_11 = tmp;
+		}
+		break;
+	case 0x4480:
+	case 0x4484:
+	case 0x4488:
+	case 0x448C:
+	case 0x4490:
+	case 0x4494:
+	case 0x4498:
+	case 0x449C:
+	case 0x44A0:
+	case 0x44A4:
+	case 0x44A8:
+	case 0x44AC:
+	case 0x44B0:
+	case 0x44B4:
+	case 0x44B8:
+	case 0x44BC:
+		/* TX_FORMAT0_[0-15] */
+		i = (reg - 0x4480) >> 2;
+		tmp = ib_chunk->kdata[idx] & 0x7FF;
+		track->textures[i].width = tmp + 1;
+		tmp = (ib_chunk->kdata[idx] >> 11) & 0x7FF;
+		track->textures[i].height = tmp + 1;
+		tmp = (ib_chunk->kdata[idx] >> 26) & 0xF;
+		track->textures[i].num_levels = tmp;
+		tmp = ib_chunk->kdata[idx] & (1 << 31);
+		track->textures[i].use_pitch = !!tmp;
+		tmp = (ib_chunk->kdata[idx] >> 22) & 0xF;
+		track->textures[i].txdepth = tmp;
+		break;
 	default:
-		printk(KERN_ERR "Forbidden register 0x%04X in cs at %d\n", reg, idx);
+		printk(KERN_ERR "Forbidden register 0x%04X in cs at %d\n",
+		       reg, idx);
 		return -EINVAL;
 	}
 	return 0;
@@ -1015,11 +1363,12 @@ static int r300_packet3_check(struct radeon_cs_parser *p,
 	ib = p->ib->ptr;
 	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	idx = pkt->idx + 1;
-	track = (struct r300_cs_track *)p->track;
-	switch (pkt->opcode) {
+	track = (struct r300_cs_track*)p->track;
+	switch(pkt->opcode) {
 	case PACKET3_3D_LOAD_VBPNTR:
-		c = ib_chunk->kdata[idx++];
-		for (i = 0; i < (c - 1); i += 2, idx += 3) {
+		c = ib_chunk->kdata[idx++] & 0x1F;
+		track->num_arrays = c;
+		for (i = 0; i < (c - 1); i+=2, idx+=3) {
 			r = r100_cs_packet_next_reloc(p, &reloc);
 			if (r) {
 				DRM_ERROR("No reloc for packet3 %d\n",
@@ -1028,6 +1377,9 @@ static int r300_packet3_check(struct radeon_cs_parser *p,
 				return r;
 			}
 			ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
+			track->arrays[i + 0].robj = reloc->robj;
+			track->arrays[i + 0].esize = ib_chunk->kdata[idx] >> 8;
+			track->arrays[i + 0].esize &= 0x7F;
 			r = r100_cs_packet_next_reloc(p, &reloc);
 			if (r) {
 				DRM_ERROR("No reloc for packet3 %d\n",
@@ -1036,6 +1388,9 @@ static int r300_packet3_check(struct radeon_cs_parser *p,
 				return r;
 			}
 			ib[idx+2] = ib_chunk->kdata[idx+2] + ((u32)reloc->lobj.gpu_offset);
+			track->arrays[i + 1].robj = reloc->robj;
+			track->arrays[i + 1].esize = ib_chunk->kdata[idx] >> 24;
+			track->arrays[i + 1].esize &= 0x7F;
 		}
 		if (c & 1) {
 			r = r100_cs_packet_next_reloc(p, &reloc);
@@ -1046,6 +1401,9 @@ static int r300_packet3_check(struct radeon_cs_parser *p,
 				return r;
 			}
 			ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
+			track->arrays[i + 0].robj = reloc->robj;
+			track->arrays[i + 0].esize = ib_chunk->kdata[idx] >> 8;
+			track->arrays[i + 0].esize &= 0x7F;
 		}
 		break;
 	case PACKET3_INDX_BUFFER:
@@ -1056,14 +1414,65 @@ static int r300_packet3_check(struct radeon_cs_parser *p,
 			return r;
 		}
 		ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
+		r = r100_cs_track_check_pkt3_indx_buffer(p, pkt, reloc->robj);
+		if (r) {
+			return r;
+		}
 		break;
 	/* Draw packet */
-	case PACKET3_3D_DRAW_VBUF:
 	case PACKET3_3D_DRAW_IMMD:
-	case PACKET3_3D_DRAW_INDX:
-	case PACKET3_3D_DRAW_VBUF_2:
+		/* Number of dwords is vtx_size * (num_vertices - 1)
+		 * PRIM_WALK must be equal to 3 vertex data in embedded
+		 * in cmd stream */
+		if (((ib_chunk->kdata[idx+1] >> 4) & 0x3) != 3) {
+			DRM_ERROR("PRIM_WALK must be 3 for IMMD draw\n");
+			return -EINVAL;
+		}
+		track->vap_vf_cntl = ib_chunk->kdata[idx+1];
+		track->immd_dwords = pkt->count - 1;
+		r = r300_cs_track_check(p->rdev, track);
+		if (r) {
+			return r;
+		}
+		break;
 	case PACKET3_3D_DRAW_IMMD_2:
+		/* Number of dwords is vtx_size * (num_vertices - 1)
+		 * PRIM_WALK must be equal to 3 vertex data in embedded
+		 * in cmd stream */
+		if (((ib_chunk->kdata[idx] >> 4) & 0x3) != 3) {
+			DRM_ERROR("PRIM_WALK must be 3 for IMMD draw\n");
+			return -EINVAL;
+		}
+		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		track->immd_dwords = pkt->count;
+		r = r300_cs_track_check(p->rdev, track);
+		if (r) {
+			return r;
+		}
+		break;
+	case PACKET3_3D_DRAW_VBUF:
+		track->vap_vf_cntl = ib_chunk->kdata[idx + 1];
+		r = r300_cs_track_check(p->rdev, track);
+		if (r) {
+			return r;
+		}
+		break;
+	case PACKET3_3D_DRAW_VBUF_2:
+		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		r = r300_cs_track_check(p->rdev, track);
+		if (r) {
+			return r;
+		}
+		break;
+	case PACKET3_3D_DRAW_INDX:
+		track->vap_vf_cntl = ib_chunk->kdata[idx + 1];
+		r = r300_cs_track_check(p->rdev, track);
+		if (r) {
+			return r;
+		}
+		break;
 	case PACKET3_3D_DRAW_INDX_2:
+		track->vap_vf_cntl = ib_chunk->kdata[idx];
 		r = r300_cs_track_check(p->rdev, track);
 		if (r) {
 			return r;
@@ -1095,8 +1504,8 @@ int r300_cs_parse(struct radeon_cs_parser *p)
 		switch (pkt.type) {
 		case PACKET_TYPE0:
 			r = r100_cs_parse_packet0(p, &pkt,
-						  r300_auth_reg,
-						  ARRAY_SIZE(r300_auth_reg),
+						  p->rdev->config.r300.reg_safe_bm,
+						  p->rdev->config.r300.reg_safe_bm_size,
 						  &r300_packet0_check);
 			break;
 		case PACKET_TYPE2:
@@ -1114,3 +1523,10 @@ int r300_cs_parse(struct radeon_cs_parser *p)
 	} while (p->idx < p->chunks[p->chunk_ib_idx].length_dw);
 	return 0;
 }
+
+int r300_init(struct radeon_device *rdev)
+{
+	rdev->config.r300.reg_safe_bm = r300_reg_safe_bm;
+	rdev->config.r300.reg_safe_bm_size = ARRAY_SIZE(r300_reg_safe_bm);
+	return 0;
+}
diff --git a/drivers/gpu/drm/radeon/r300.h b/drivers/gpu/drm/radeon/r300.h
new file mode 100644
index 00000000000..8486b4da9d6
--- /dev/null
+++ b/drivers/gpu/drm/radeon/r300.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#ifndef R300_H
+#define R300_H
+
+struct r300_asic {
+	const unsigned	*reg_safe_bm;
+	unsigned	reg_safe_bm_size;
+};
+
+#endif
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index c3f24cc5600..d61f2fc61df 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -51,7 +51,7 @@
 
 #include "radeon_mode.h"
 #include "radeon_reg.h"
-
+#include "r300.h"
 
 /*
  * Modules parameters.
@@ -496,6 +496,7 @@ int r100_debugfs_cp_init(struct radeon_device *rdev);
  * ASIC specific functions.
  */
 struct radeon_asic {
+	int (*init)(struct radeon_device *rdev);
 	void (*errata)(struct radeon_device *rdev);
 	void (*vram_info)(struct radeon_device *rdev);
 	int (*gpu_reset)(struct radeon_device *rdev);
@@ -536,6 +537,10 @@ struct radeon_asic {
 	void (*set_clock_gating)(struct radeon_device *rdev, int enable);
 };
 
+union radeon_asic_config {
+	struct r300_asic	r300;
+};
+
 
 /*
  * IOCTL.
@@ -573,6 +578,7 @@ struct radeon_device {
 	struct drm_device		*ddev;
 	struct pci_dev			*pdev;
 	/* ASIC */
+	union radeon_asic_config	config;
 	enum radeon_family		family;
 	unsigned long			flags;
 	int				usec_timeout;
@@ -763,6 +769,7 @@ static inline void radeon_ring_write(struct radeon_device *rdev, uint32_t v)
 /*
  * ASICs macro.
  */
+#define radeon_init(rdev) (rdev)->asic->init((rdev))
 #define radeon_cs_parse(p) rdev->asic->cs_parse((p))
 #define radeon_errata(rdev) (rdev)->asic->errata((rdev))
 #define radeon_vram_info(rdev) (rdev)->asic->vram_info((rdev))
diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h
index e57d8a784e9..e2e567395df 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.h
+++ b/drivers/gpu/drm/radeon/radeon_asic.h
@@ -41,6 +41,7 @@ void radeon_atom_set_clock_gating(struct radeon_device *rdev, int enable);
 /*
  * r100,rv100,rs100,rv200,rs200,r200,rv250,rs300,rv280
  */
+int r100_init(struct radeon_device *rdev);
 uint32_t r100_mm_rreg(struct radeon_device *rdev, uint32_t reg);
 void r100_mm_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
 void r100_errata(struct radeon_device *rdev);
@@ -72,6 +73,7 @@ int r100_copy_blit(struct radeon_device *rdev,
 		   struct radeon_fence *fence);
 
 static struct radeon_asic r100_asic = {
+	.init = &r100_init,
 	.errata = &r100_errata,
 	.vram_info = &r100_vram_info,
 	.gpu_reset = &r100_gpu_reset,
@@ -104,6 +106,7 @@ static struct radeon_asic r100_asic = {
 /*
  * r300,r350,rv350,rv380
  */
+int r300_init(struct radeon_device *rdev);
 void r300_errata(struct radeon_device *rdev);
 void r300_vram_info(struct radeon_device *rdev);
 int r300_gpu_reset(struct radeon_device *rdev);
@@ -126,6 +129,7 @@ int r300_copy_dma(struct radeon_device *rdev,
 		  unsigned num_pages,
 		  struct radeon_fence *fence);
 static struct radeon_asic r300_asic = {
+	.init = &r300_init,
 	.errata = &r300_errata,
 	.vram_info = &r300_vram_info,
 	.gpu_reset = &r300_gpu_reset,
@@ -162,6 +166,7 @@ void r420_vram_info(struct radeon_device *rdev);
 int r420_mc_init(struct radeon_device *rdev);
 void r420_mc_fini(struct radeon_device *rdev);
 static struct radeon_asic r420_asic = {
+	.init = &r300_init,
 	.errata = &r420_errata,
 	.vram_info = &r420_vram_info,
 	.gpu_reset = &r300_gpu_reset,
@@ -205,6 +210,7 @@ int rs400_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr);
 uint32_t rs400_mc_rreg(struct radeon_device *rdev, uint32_t reg);
 void rs400_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
 static struct radeon_asic rs400_asic = {
+	.init = &r300_init,
 	.errata = &rs400_errata,
 	.vram_info = &rs400_vram_info,
 	.gpu_reset = &r300_gpu_reset,
@@ -249,6 +255,7 @@ int rs600_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr);
 uint32_t rs600_mc_rreg(struct radeon_device *rdev, uint32_t reg);
 void rs600_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
 static struct radeon_asic rs600_asic = {
+	.init = &r300_init,
 	.errata = &rs600_errata,
 	.vram_info = &rs600_vram_info,
 	.gpu_reset = &r300_gpu_reset,
@@ -288,6 +295,7 @@ void rs690_mc_fini(struct radeon_device *rdev);
 uint32_t rs690_mc_rreg(struct radeon_device *rdev, uint32_t reg);
 void rs690_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
 static struct radeon_asic rs690_asic = {
+	.init = &r300_init,
 	.errata = &rs690_errata,
 	.vram_info = &rs690_vram_info,
 	.gpu_reset = &r300_gpu_reset,
@@ -320,6 +328,7 @@ static struct radeon_asic rs690_asic = {
 /*
  * rv515
  */
+int rv515_init(struct radeon_device *rdev);
 void rv515_errata(struct radeon_device *rdev);
 void rv515_vram_info(struct radeon_device *rdev);
 int rv515_gpu_reset(struct radeon_device *rdev);
@@ -331,6 +340,7 @@ void rv515_ring_start(struct radeon_device *rdev);
 uint32_t rv515_pcie_rreg(struct radeon_device *rdev, uint32_t reg);
 void rv515_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
 static struct radeon_asic rv515_asic = {
+	.init = &rv515_init,
 	.errata = &rv515_errata,
 	.vram_info = &rv515_vram_info,
 	.gpu_reset = &rv515_gpu_reset,
@@ -349,7 +359,7 @@ static struct radeon_asic rv515_asic = {
 	.irq_set = &r100_irq_set,
 	.irq_process = &r100_irq_process,
 	.fence_ring_emit = &r300_fence_ring_emit,
-	.cs_parse = &r100_cs_parse,
+	.cs_parse = &r300_cs_parse,
 	.copy_blit = &r100_copy_blit,
 	.copy_dma = &r300_copy_dma,
 	.copy = &r100_copy_blit,
@@ -368,6 +378,7 @@ void r520_vram_info(struct radeon_device *rdev);
 int r520_mc_init(struct radeon_device *rdev);
 void r520_mc_fini(struct radeon_device *rdev);
 static struct radeon_asic r520_asic = {
+	.init = &rv515_init,
 	.errata = &r520_errata,
 	.vram_info = &r520_vram_info,
 	.gpu_reset = &rv515_gpu_reset,
@@ -386,7 +397,7 @@ static struct radeon_asic r520_asic = {
 	.irq_set = &r100_irq_set,
 	.irq_process = &r100_irq_process,
 	.fence_ring_emit = &r300_fence_ring_emit,
-	.cs_parse = &r100_cs_parse,
+	.cs_parse = &r300_cs_parse,
 	.copy_blit = &r100_copy_blit,
 	.copy_dma = &r300_copy_dma,
 	.copy = &r100_copy_blit,
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 786632d3e37..1f5a1a49098 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -835,7 +835,6 @@ radeon_atombios_get_primary_dac_info(struct radeon_encoder *encoder)
 	struct _COMPASSIONATE_DATA *dac_info;
 	uint8_t frev, crev;
 	uint8_t bg, dac;
-	int i;
 	struct radeon_encoder_primary_dac *p_dac = NULL;
 
 	atom_parse_data_header(mode_info->atom_context, index, NULL, &frev, &crev, &data_offset);
@@ -867,7 +866,6 @@ radeon_atombios_get_tv_dac_info(struct radeon_encoder *encoder)
 	struct _COMPASSIONATE_DATA *dac_info;
 	uint8_t frev, crev;
 	uint8_t bg, dac;
-	int i;
 	struct radeon_encoder_tv_dac *tv_dac = NULL;
 
 	atom_parse_data_header(mode_info->atom_context, index, NULL, &frev, &crev, &data_offset);
diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index 06e8038bc4a..afc4db280b9 100644
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -799,6 +799,7 @@ static struct radeon_encoder_lvds *radeon_legacy_get_lvds_info_from_regs(struct
 	struct radeon_encoder_lvds *lvds = NULL;
 	uint32_t fp_vert_stretch, fp_horz_stretch;
 	uint32_t ppll_div_sel, ppll_val;
+	uint32_t lvds_ss_gen_cntl = RREG32(RADEON_LVDS_SS_GEN_CNTL);
 
 	lvds = kzalloc(sizeof(struct radeon_encoder_lvds), GFP_KERNEL);
 
@@ -808,6 +809,14 @@ static struct radeon_encoder_lvds *radeon_legacy_get_lvds_info_from_regs(struct
 	fp_vert_stretch = RREG32(RADEON_FP_VERT_STRETCH);
 	fp_horz_stretch = RREG32(RADEON_FP_HORZ_STRETCH);
 
+	/* These should be fail-safe defaults, fingers crossed */
+	lvds->panel_pwr_delay = 200;
+	lvds->panel_vcc_delay = 2000;
+
+	lvds->lvds_gen_cntl = RREG32(RADEON_LVDS_GEN_CNTL);
+	lvds->panel_digon_delay = (lvds_ss_gen_cntl >> RADEON_LVDS_PWRSEQ_DELAY1_SHIFT) & 0xf;
+	lvds->panel_blon_delay = (lvds_ss_gen_cntl >> RADEON_LVDS_PWRSEQ_DELAY2_SHIFT) & 0xf;
+
 	if (fp_vert_stretch & RADEON_VERT_STRETCH_ENABLE)
 		lvds->native_mode.panel_yres =
 		    ((fp_vert_stretch & RADEON_VERT_PANEL_SIZE) >>
diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c
index 89c4c44169f..d8356827ef1 100644
--- a/drivers/gpu/drm/radeon/radeon_cp.c
+++ b/drivers/gpu/drm/radeon/radeon_cp.c
@@ -2045,11 +2045,10 @@ int radeon_driver_load(struct drm_device *dev, unsigned long flags)
 	drm_radeon_private_t *dev_priv;
 	int ret = 0;
 
-	dev_priv = drm_alloc(sizeof(drm_radeon_private_t), DRM_MEM_DRIVER);
+	dev_priv = kzalloc(sizeof(drm_radeon_private_t), GFP_KERNEL);
 	if (dev_priv == NULL)
 		return -ENOMEM;
 
-	memset(dev_priv, 0, sizeof(drm_radeon_private_t));
 	dev->dev_private = (void *)dev_priv;
 	dev_priv->flags = flags;
 
@@ -2103,7 +2102,7 @@ int radeon_master_create(struct drm_device *dev, struct drm_master *master)
 	unsigned long sareapage;
 	int ret;
 
-	master_priv = drm_calloc(1, sizeof(*master_priv), DRM_MEM_DRIVER);
+	master_priv = kzalloc(sizeof(*master_priv), GFP_KERNEL);
 	if (!master_priv)
 		return -ENOMEM;
 
@@ -2137,7 +2136,7 @@ void radeon_master_destroy(struct drm_device *dev, struct drm_master *master)
 	if (master_priv->sarea)
 		drm_rmmap_locked(dev, master_priv->sarea);
 
-	drm_free(master_priv, sizeof(*master_priv), DRM_MEM_DRIVER);
+	kfree(master_priv);
 
 	master->driver_priv = NULL;
 }
@@ -2171,7 +2170,7 @@ int radeon_driver_unload(struct drm_device *dev)
 
 	drm_rmmap(dev, dev_priv->mmio);
 
-	drm_free(dev_priv, sizeof(*dev_priv), DRM_MEM_DRIVER);
+	kfree(dev_priv);
 
 	dev->dev_private = NULL;
 	return 0;
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index 5fd2b639bf6..f30aa7274a5 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -470,6 +470,10 @@ int radeon_device_init(struct radeon_device *rdev,
 	if (r) {
 		return r;
 	}
+	r = radeon_init(rdev);
+	if (r) {
+		return r;
+	}
 
 	/* Report DMA addressing limitation */
 	r = pci_set_dma_mask(rdev->pdev, DMA_BIT_MASK(32));
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 5452bb9d925..3efcf1a526b 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -351,7 +351,7 @@ int radeon_ddc_get_modes(struct radeon_connector *radeon_connector)
 	radeon_i2c_do_lock(radeon_connector, 0);
 	if (edid) {
 		/* update digital bits here */
-		if (edid->digital)
+		if (edid->input & DRM_EDID_INPUT_DIGITAL)
 			radeon_connector->use_digital = 1;
 		else
 			radeon_connector->use_digital = 0;
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index c815a2cbf7b..09c9fb9f621 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -313,7 +313,7 @@ static int __init radeon_init(void)
 {
 	driver = &driver_old;
 	driver->num_ioctls = radeon_max_ioctl;
-#if defined(CONFIG_DRM_RADEON_KMS) && defined(CONFIG_X86)
+#if defined(CONFIG_DRM_RADEON_KMS)
 	/* if enabled by default */
 	if (radeon_modeset == -1) {
 		DRM_INFO("radeon default to kernel modesetting.\n");
diff --git a/drivers/gpu/drm/radeon/radeon_i2c.c b/drivers/gpu/drm/radeon/radeon_i2c.c
index 71465ed2688..dd438d32e5c 100644
--- a/drivers/gpu/drm/radeon/radeon_i2c.c
+++ b/drivers/gpu/drm/radeon/radeon_i2c.c
@@ -162,7 +162,7 @@ struct radeon_i2c_chan *radeon_i2c_create(struct drm_device *dev,
 	struct radeon_i2c_chan *i2c;
 	int ret;
 
-	i2c = drm_calloc(1, sizeof(struct radeon_i2c_chan), DRM_MEM_DRIVER);
+	i2c = kzalloc(sizeof(struct radeon_i2c_chan), GFP_KERNEL);
 	if (i2c == NULL)
 		return NULL;
 
@@ -189,7 +189,7 @@ struct radeon_i2c_chan *radeon_i2c_create(struct drm_device *dev,
 
 	return i2c;
 out_free:
-	drm_free(i2c, sizeof(struct radeon_i2c_chan), DRM_MEM_DRIVER);
+	kfree(i2c);
 	return NULL;
 
 }
@@ -200,7 +200,7 @@ void radeon_i2c_destroy(struct radeon_i2c_chan *i2c)
 		return;
 
 	i2c_del_adapter(&i2c->adapter);
-	drm_free(i2c, sizeof(struct radeon_i2c_chan), DRM_MEM_DRIVER);
+	kfree(i2c);
 }
 
 struct drm_encoder *radeon_best_encoder(struct drm_connector *connector)
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index 64f42b19cbf..4612a7c146d 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -169,7 +169,7 @@ int radeon_master_create_kms(struct drm_device *dev, struct drm_master *master)
 	unsigned long sareapage;
 	int ret;
 
-	master_priv = drm_calloc(1, sizeof(*master_priv), DRM_MEM_DRIVER);
+	master_priv = kzalloc(sizeof(*master_priv), GFP_KERNEL);
 	if (master_priv == NULL) {
 		return -ENOMEM;
 	}
@@ -199,7 +199,7 @@ void radeon_master_destroy_kms(struct drm_device *dev,
 	if (master_priv->sarea) {
 		drm_rmmap_locked(dev, master_priv->sarea);
 	}
-	drm_free(master_priv, sizeof(*master_priv), DRM_MEM_DRIVER);
+	kfree(master_priv);
 	master->driver_priv = NULL;
 }
 
diff --git a/drivers/gpu/drm/radeon/radeon_mem.c b/drivers/gpu/drm/radeon/radeon_mem.c
index 4af5286a36f..ed95155c4b1 100644
--- a/drivers/gpu/drm/radeon/radeon_mem.c
+++ b/drivers/gpu/drm/radeon/radeon_mem.c
@@ -43,8 +43,8 @@ static struct mem_block *split_block(struct mem_block *p, int start, int size,
 {
 	/* Maybe cut off the start of an existing block */
 	if (start > p->start) {
-		struct mem_block *newblock =
-		    drm_alloc(sizeof(*newblock), DRM_MEM_BUFS);
+		struct mem_block *newblock = kmalloc(sizeof(*newblock),
+						     GFP_KERNEL);
 		if (!newblock)
 			goto out;
 		newblock->start = start;
@@ -60,8 +60,8 @@ static struct mem_block *split_block(struct mem_block *p, int start, int size,
 
 	/* Maybe cut off the end of an existing block */
 	if (size < p->size) {
-		struct mem_block *newblock =
-		    drm_alloc(sizeof(*newblock), DRM_MEM_BUFS);
+		struct mem_block *newblock = kmalloc(sizeof(*newblock),
+						     GFP_KERNEL);
 		if (!newblock)
 			goto out;
 		newblock->start = start + size;
@@ -118,7 +118,7 @@ static void free_block(struct mem_block *p)
 		p->size += q->size;
 		p->next = q->next;
 		p->next->prev = p;
-		drm_free(q, sizeof(*q), DRM_MEM_BUFS);
+		kfree(q);
 	}
 
 	if (p->prev->file_priv == NULL) {
@@ -126,7 +126,7 @@ static void free_block(struct mem_block *p)
 		q->size += p->size;
 		q->next = p->next;
 		q->next->prev = q;
-		drm_free(p, sizeof(*q), DRM_MEM_BUFS);
+		kfree(p);
 	}
 }
 
@@ -134,14 +134,14 @@ static void free_block(struct mem_block *p)
  */
 static int init_heap(struct mem_block **heap, int start, int size)
 {
-	struct mem_block *blocks = drm_alloc(sizeof(*blocks), DRM_MEM_BUFS);
+	struct mem_block *blocks = kmalloc(sizeof(*blocks), GFP_KERNEL);
 
 	if (!blocks)
 		return -ENOMEM;
 
-	*heap = drm_alloc(sizeof(**heap), DRM_MEM_BUFS);
+	*heap = kmalloc(sizeof(**heap), GFP_KERNEL);
 	if (!*heap) {
-		drm_free(blocks, sizeof(*blocks), DRM_MEM_BUFS);
+		kfree(blocks);
 		return -ENOMEM;
 	}
 
@@ -179,7 +179,7 @@ void radeon_mem_release(struct drm_file *file_priv, struct mem_block *heap)
 			p->size += q->size;
 			p->next = q->next;
 			p->next->prev = p;
-			drm_free(q, sizeof(*q), DRM_MEM_DRIVER);
+			kfree(q);
 		}
 	}
 }
@@ -196,10 +196,10 @@ void radeon_mem_takedown(struct mem_block **heap)
 	for (p = (*heap)->next; p != *heap;) {
 		struct mem_block *q = p;
 		p = p->next;
-		drm_free(q, sizeof(*q), DRM_MEM_DRIVER);
+		kfree(q);
 	}
 
-	drm_free(*heap, sizeof(**heap), DRM_MEM_DRIVER);
+	kfree(*heap);
 	*heap = NULL;
 }
 
diff --git a/drivers/gpu/drm/radeon/radeon_reg.h b/drivers/gpu/drm/radeon/radeon_reg.h
index 6d3d90406a2..e1b61857446 100644
--- a/drivers/gpu/drm/radeon/radeon_reg.h
+++ b/drivers/gpu/drm/radeon/radeon_reg.h
@@ -3184,6 +3184,7 @@
 #	define RADEON_RB_BUFSZ_MASK		(0x3f << 0)
 #	define RADEON_RB_BLKSZ_SHIFT		8
 #	define RADEON_RB_BLKSZ_MASK		(0x3f << 8)
+#	define RADEON_BUF_SWAP_32BIT		(1 << 17)
 #	define RADEON_MAX_FETCH_SHIFT		18
 #	define RADEON_MAX_FETCH_MASK		(0x3 << 18)
 #	define RADEON_RB_NO_UPDATE		(1 << 27)
diff --git a/drivers/gpu/drm/radeon/radeon_state.c b/drivers/gpu/drm/radeon/radeon_state.c
index fa728ec6ed3..46645f3e032 100644
--- a/drivers/gpu/drm/radeon/radeon_state.c
+++ b/drivers/gpu/drm/radeon/radeon_state.c
@@ -2866,12 +2866,12 @@ static int radeon_cp_cmdbuf(struct drm_device *dev, void *data, struct drm_file
 	 */
 	orig_bufsz = cmdbuf->bufsz;
 	if (orig_bufsz != 0) {
-		kbuf = drm_alloc(cmdbuf->bufsz, DRM_MEM_DRIVER);
+		kbuf = kmalloc(cmdbuf->bufsz, GFP_KERNEL);
 		if (kbuf == NULL)
 			return -ENOMEM;
 		if (DRM_COPY_FROM_USER(kbuf, (void __user *)cmdbuf->buf,
 				       cmdbuf->bufsz)) {
-			drm_free(kbuf, orig_bufsz, DRM_MEM_DRIVER);
+			kfree(kbuf);
 			return -EFAULT;
 		}
 		cmdbuf->buf = kbuf;
@@ -2884,7 +2884,7 @@ static int radeon_cp_cmdbuf(struct drm_device *dev, void *data, struct drm_file
 		temp = r300_do_cp_cmdbuf(dev, file_priv, cmdbuf);
 
 		if (orig_bufsz != 0)
-			drm_free(kbuf, orig_bufsz, DRM_MEM_DRIVER);
+			kfree(kbuf);
 
 		return temp;
 	}
@@ -2991,7 +2991,7 @@ static int radeon_cp_cmdbuf(struct drm_device *dev, void *data, struct drm_file
 	}
 
 	if (orig_bufsz != 0)
-		drm_free(kbuf, orig_bufsz, DRM_MEM_DRIVER);
+		kfree(kbuf);
 
 	DRM_DEBUG("DONE\n");
 	COMMIT_RING();
@@ -2999,7 +2999,7 @@ static int radeon_cp_cmdbuf(struct drm_device *dev, void *data, struct drm_file
 
       err:
 	if (orig_bufsz != 0)
-		drm_free(kbuf, orig_bufsz, DRM_MEM_DRIVER);
+		kfree(kbuf);
 	return -EINVAL;
 }
 
@@ -3175,9 +3175,7 @@ int radeon_driver_open(struct drm_device *dev, struct drm_file *file_priv)
 	struct drm_radeon_driver_file_fields *radeon_priv;
 
 	DRM_DEBUG("\n");
-	radeon_priv =
-	    (struct drm_radeon_driver_file_fields *)
-	    drm_alloc(sizeof(*radeon_priv), DRM_MEM_FILES);
+	radeon_priv = kmalloc(sizeof(*radeon_priv), GFP_KERNEL);
 
 	if (!radeon_priv)
 		return -ENOMEM;
@@ -3196,7 +3194,7 @@ void radeon_driver_postclose(struct drm_device *dev, struct drm_file *file_priv)
 	struct drm_radeon_driver_file_fields *radeon_priv =
 	    file_priv->driver_priv;
 
-	drm_free(radeon_priv, sizeof(*radeon_priv), DRM_MEM_FILES);
+	kfree(radeon_priv);
 }
 
 struct drm_ioctl_desc radeon_ioctls[] = {
diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c
index 4c087c1510d..1227a97f516 100644
--- a/drivers/gpu/drm/radeon/radeon_ttm.c
+++ b/drivers/gpu/drm/radeon/radeon_ttm.c
@@ -133,6 +133,7 @@ static int radeon_init_mem_type(struct ttm_bo_device *bdev, uint32_t type,
 		man->gpu_offset = 0;
 		man->available_caching = TTM_PL_MASK_CACHING;
 		man->default_caching = TTM_PL_FLAG_CACHED;
+		man->flags = TTM_MEMTYPE_FLAG_MAPPABLE | TTM_MEMTYPE_FLAG_CMA;
 #if __OS_HAS_AGP
 		if (rdev->flags & RADEON_IS_AGP) {
 			if (!(drm_core_has_AGP(rdev->ddev) && rdev->ddev->agp)) {
@@ -143,8 +144,9 @@ static int radeon_init_mem_type(struct ttm_bo_device *bdev, uint32_t type,
 			man->io_offset = rdev->mc.agp_base;
 			man->io_size = rdev->mc.gtt_size;
 			man->io_addr = NULL;
-			man->flags = TTM_MEMTYPE_FLAG_NEEDS_IOREMAP |
-				     TTM_MEMTYPE_FLAG_MAPPABLE;
+			if (!rdev->ddev->agp->cant_use_aperture)
+				man->flags = TTM_MEMTYPE_FLAG_NEEDS_IOREMAP |
+					     TTM_MEMTYPE_FLAG_MAPPABLE;
 			man->available_caching = TTM_PL_FLAG_UNCACHED |
 						 TTM_PL_FLAG_WC;
 			man->default_caching = TTM_PL_FLAG_WC;
@@ -154,8 +156,6 @@ static int radeon_init_mem_type(struct ttm_bo_device *bdev, uint32_t type,
 			man->io_offset = 0;
 			man->io_size = 0;
 			man->io_addr = NULL;
-			man->flags = TTM_MEMTYPE_FLAG_MAPPABLE |
-				     TTM_MEMTYPE_FLAG_CMA;
 		}
 		break;
 	case TTM_PL_VRAM:
diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c
index 7eab95db58a..ffea37b1b3e 100644
--- a/drivers/gpu/drm/radeon/rv515.c
+++ b/drivers/gpu/drm/radeon/rv515.c
@@ -225,6 +225,8 @@ void rv515_ring_start(struct radeon_device *rdev)
 	radeon_ring_write(rdev,
 			  R300_GEOMETRY_ROUND_NEAREST |
 			  R300_COLOR_ROUND_NEAREST);
+	radeon_ring_write(rdev, PACKET0(0x20C8, 0));
+	radeon_ring_write(rdev, 0);
 	radeon_ring_unlock_commit(rdev);
 }
 
@@ -502,3 +504,59 @@ int rv515_debugfs_ga_info_init(struct radeon_device *rdev)
 	return 0;
 #endif
 }
+
+
+/*
+ * Asic initialization
+ */
+static const unsigned r500_reg_safe_bm[159] = {
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFBF, 0xFFFFFFFF, 0xFFFFFFBF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0x17FF1FFF, 0xFFFFFFFC, 0xFFFFFFFF, 0xFF30FFBF,
+	0xFFFFFFF8, 0xC3E6FFFF, 0xFFFFF6DF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFF03F,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFEFCE, 0xF00EBFFF, 0x007C0000,
+	0xF0000038, 0xFF000009, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFF7FF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0x1FFFFC78, 0xFFFFE000, 0xFFFFFFFE, 0xFFFFFFFF,
+	0x38CF8F50, 0xFFF88082, 0xFF0000FC, 0xFAE009FF,
+	0x0000FFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000,
+	0xFFFF8CFC, 0xFFFFC1FF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFF80FFFF,
+	0x00000000, 0x00000000, 0x00000000, 0x00000000,
+	0x0003FC01, 0x3FFFFCF8, 0xFE800B19,
+};
+
+
+
+int rv515_init(struct radeon_device *rdev)
+{
+	rdev->config.r300.reg_safe_bm = r500_reg_safe_bm;
+	rdev->config.r300.reg_safe_bm_size = ARRAY_SIZE(r500_reg_safe_bm);
+	return 0;
+}
diff --git a/drivers/gpu/drm/savage/savage_bci.c b/drivers/gpu/drm/savage/savage_bci.c
index 456cd040f31..bff6fc2524c 100644
--- a/drivers/gpu/drm/savage/savage_bci.c
+++ b/drivers/gpu/drm/savage/savage_bci.c
@@ -298,8 +298,8 @@ static int savage_dma_init(drm_savage_private_t * dev_priv)
 
 	dev_priv->nr_dma_pages = dev_priv->cmd_dma->size /
 	    (SAVAGE_DMA_PAGE_SIZE * 4);
-	dev_priv->dma_pages = drm_alloc(sizeof(drm_savage_dma_page_t) *
-					dev_priv->nr_dma_pages, DRM_MEM_DRIVER);
+	dev_priv->dma_pages = kmalloc(sizeof(drm_savage_dma_page_t) *
+				      dev_priv->nr_dma_pages, GFP_KERNEL);
 	if (dev_priv->dma_pages == NULL)
 		return -ENOMEM;
 
@@ -539,7 +539,7 @@ int savage_driver_load(struct drm_device *dev, unsigned long chipset)
 {
 	drm_savage_private_t *dev_priv;
 
-	dev_priv = drm_alloc(sizeof(drm_savage_private_t), DRM_MEM_DRIVER);
+	dev_priv = kmalloc(sizeof(drm_savage_private_t), GFP_KERNEL);
 	if (dev_priv == NULL)
 		return -ENOMEM;
 
@@ -671,7 +671,7 @@ int savage_driver_unload(struct drm_device *dev)
 {
 	drm_savage_private_t *dev_priv = dev->dev_private;
 
-	drm_free(dev_priv, sizeof(drm_savage_private_t), DRM_MEM_DRIVER);
+	kfree(dev_priv);
 
 	return 0;
 }
@@ -804,8 +804,8 @@ static int savage_do_init_bci(struct drm_device * dev, drm_savage_init_t * init)
 		dev_priv->fake_dma.offset = 0;
 		dev_priv->fake_dma.size = SAVAGE_FAKE_DMA_SIZE;
 		dev_priv->fake_dma.type = _DRM_SHM;
-		dev_priv->fake_dma.handle = drm_alloc(SAVAGE_FAKE_DMA_SIZE,
-						      DRM_MEM_DRIVER);
+		dev_priv->fake_dma.handle = kmalloc(SAVAGE_FAKE_DMA_SIZE,
+						    GFP_KERNEL);
 		if (!dev_priv->fake_dma.handle) {
 			DRM_ERROR("could not allocate faked DMA buffer!\n");
 			savage_do_cleanup_bci(dev);
@@ -903,9 +903,7 @@ static int savage_do_cleanup_bci(struct drm_device * dev)
 	drm_savage_private_t *dev_priv = dev->dev_private;
 
 	if (dev_priv->cmd_dma == &dev_priv->fake_dma) {
-		if (dev_priv->fake_dma.handle)
-			drm_free(dev_priv->fake_dma.handle,
-				 SAVAGE_FAKE_DMA_SIZE, DRM_MEM_DRIVER);
+		kfree(dev_priv->fake_dma.handle);
 	} else if (dev_priv->cmd_dma && dev_priv->cmd_dma->handle &&
 		   dev_priv->cmd_dma->type == _DRM_AGP &&
 		   dev_priv->dma_type == SAVAGE_DMA_AGP)
@@ -920,10 +918,7 @@ static int savage_do_cleanup_bci(struct drm_device * dev)
 		dev->agp_buffer_map = NULL;
 	}
 
-	if (dev_priv->dma_pages)
-		drm_free(dev_priv->dma_pages,
-			 sizeof(drm_savage_dma_page_t) * dev_priv->nr_dma_pages,
-			 DRM_MEM_DRIVER);
+	kfree(dev_priv->dma_pages);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/savage/savage_state.c b/drivers/gpu/drm/savage/savage_state.c
index 5f6238fdf1f..8a3e31599c9 100644
--- a/drivers/gpu/drm/savage/savage_state.c
+++ b/drivers/gpu/drm/savage/savage_state.c
@@ -988,20 +988,20 @@ int savage_bci_cmdbuf(struct drm_device *dev, void *data, struct drm_file *file_
 	 * for locking on FreeBSD.
 	 */
 	if (cmdbuf->size) {
-		kcmd_addr = drm_alloc(cmdbuf->size * 8, DRM_MEM_DRIVER);
+		kcmd_addr = kmalloc(cmdbuf->size * 8, GFP_KERNEL);
 		if (kcmd_addr == NULL)
 			return -ENOMEM;
 
 		if (DRM_COPY_FROM_USER(kcmd_addr, cmdbuf->cmd_addr,
 				       cmdbuf->size * 8))
 		{
-			drm_free(kcmd_addr, cmdbuf->size * 8, DRM_MEM_DRIVER);
+			kfree(kcmd_addr);
 			return -EFAULT;
 		}
 		cmdbuf->cmd_addr = kcmd_addr;
 	}
 	if (cmdbuf->vb_size) {
-		kvb_addr = drm_alloc(cmdbuf->vb_size, DRM_MEM_DRIVER);
+		kvb_addr = kmalloc(cmdbuf->vb_size, GFP_KERNEL);
 		if (kvb_addr == NULL) {
 			ret = -ENOMEM;
 			goto done;
@@ -1015,8 +1015,8 @@ int savage_bci_cmdbuf(struct drm_device *dev, void *data, struct drm_file *file_
 		cmdbuf->vb_addr = kvb_addr;
 	}
 	if (cmdbuf->nbox) {
-		kbox_addr = drm_alloc(cmdbuf->nbox * sizeof(struct drm_clip_rect),
-				       DRM_MEM_DRIVER);
+		kbox_addr = kmalloc(cmdbuf->nbox * sizeof(struct drm_clip_rect),
+				    GFP_KERNEL);
 		if (kbox_addr == NULL) {
 			ret = -ENOMEM;
 			goto done;
@@ -1154,10 +1154,9 @@ int savage_bci_cmdbuf(struct drm_device *dev, void *data, struct drm_file *file_
 
 done:
 	/* If we didn't need to allocate them, these'll be NULL */
-	drm_free(kcmd_addr, cmdbuf->size * 8, DRM_MEM_DRIVER);
-	drm_free(kvb_addr, cmdbuf->vb_size, DRM_MEM_DRIVER);
-	drm_free(kbox_addr, cmdbuf->nbox * sizeof(struct drm_clip_rect),
-		 DRM_MEM_DRIVER);
+	kfree(kcmd_addr);
+	kfree(kvb_addr);
+	kfree(kbox_addr);
 
 	return ret;
 }
diff --git a/drivers/gpu/drm/sis/sis_drv.c b/drivers/gpu/drm/sis/sis_drv.c
index 7dacc64e9b5..e725cc0b115 100644
--- a/drivers/gpu/drm/sis/sis_drv.c
+++ b/drivers/gpu/drm/sis/sis_drv.c
@@ -40,7 +40,7 @@ static int sis_driver_load(struct drm_device *dev, unsigned long chipset)
 	drm_sis_private_t *dev_priv;
 	int ret;
 
-	dev_priv = drm_calloc(1, sizeof(drm_sis_private_t), DRM_MEM_DRIVER);
+	dev_priv = kzalloc(sizeof(drm_sis_private_t), GFP_KERNEL);
 	if (dev_priv == NULL)
 		return -ENOMEM;
 
@@ -48,7 +48,7 @@ static int sis_driver_load(struct drm_device *dev, unsigned long chipset)
 	dev_priv->chipset = chipset;
 	ret = drm_sman_init(&dev_priv->sman, 2, 12, 8);
 	if (ret) {
-		drm_free(dev_priv, sizeof(dev_priv), DRM_MEM_DRIVER);
+		kfree(dev_priv);
 	}
 
 	return ret;
@@ -59,7 +59,7 @@ static int sis_driver_unload(struct drm_device *dev)
 	drm_sis_private_t *dev_priv = dev->dev_private;
 
 	drm_sman_takedown(&dev_priv->sman);
-	drm_free(dev_priv, sizeof(*dev_priv), DRM_MEM_DRIVER);
+	kfree(dev_priv);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/ttm/ttm_agp_backend.c b/drivers/gpu/drm/ttm/ttm_agp_backend.c
index e8f6d2229d8..4648ed2f014 100644
--- a/drivers/gpu/drm/ttm/ttm_agp_backend.c
+++ b/drivers/gpu/drm/ttm/ttm_agp_backend.c
@@ -63,8 +63,7 @@ static int ttm_agp_populate(struct ttm_backend *backend,
 		if (!page)
 			page = dummy_read_page;
 
-		mem->memory[mem->page_count++] =
-		    phys_to_gart(page_to_phys(page));
+		mem->pages[mem->page_count++] = page;
 	}
 	agp_be->mem = mem;
 	return 0;
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index 1587aeca7be..c1c407f7cca 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -282,7 +282,7 @@ static int ttm_bo_handle_move_mem(struct ttm_buffer_object *bo,
 
 		ret = ttm_tt_set_placement_caching(bo->ttm, mem->placement);
 		if (ret)
-			return ret;
+			goto out_err;
 
 		if (mem->mem_type != TTM_PL_SYSTEM) {
 			ret = ttm_tt_bind(bo->ttm, mem);
@@ -527,9 +527,12 @@ static int ttm_bo_evict(struct ttm_buffer_object *bo, unsigned mem_type,
 	ret = ttm_bo_wait(bo, false, interruptible, no_wait);
 	spin_unlock(&bo->lock);
 
-	if (ret && ret != -ERESTART) {
-		printk(KERN_ERR TTM_PFX "Failed to expire sync object before "
-		       "buffer eviction.\n");
+	if (unlikely(ret != 0)) {
+		if (ret != -ERESTART) {
+			printk(KERN_ERR TTM_PFX
+			       "Failed to expire sync object before "
+			       "buffer eviction.\n");
+		}
 		goto out;
 	}
 
diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c
index c27ab3a877a..0331fa74cd3 100644
--- a/drivers/gpu/drm/ttm/ttm_tt.c
+++ b/drivers/gpu/drm/ttm/ttm_tt.c
@@ -68,7 +68,7 @@ static void ttm_tt_cache_flush_clflush(struct page *pages[],
 		ttm_tt_clflush_page(*pages++);
 	mb();
 }
-#else
+#elif !defined(__powerpc__)
 static void ttm_tt_ipi_handler(void *null)
 {
 	;
@@ -83,6 +83,15 @@ void ttm_tt_cache_flush(struct page *pages[], unsigned long num_pages)
 		ttm_tt_cache_flush_clflush(pages, num_pages);
 		return;
 	}
+#elif defined(__powerpc__)
+	unsigned long i;
+
+	for (i = 0; i < num_pages; ++i) {
+		if (pages[i]) {
+			unsigned long start = (unsigned long)page_address(pages[i]);
+			flush_dcache_range(start, start + PAGE_SIZE);
+		}
+	}
 #else
 	if (on_each_cpu(ttm_tt_ipi_handler, NULL, 1) != 0)
 		printk(KERN_ERR TTM_PFX
diff --git a/drivers/gpu/drm/via/via_map.c b/drivers/gpu/drm/via/via_map.c
index 2c4f0b48579..6e6f9159163 100644
--- a/drivers/gpu/drm/via/via_map.c
+++ b/drivers/gpu/drm/via/via_map.c
@@ -96,7 +96,7 @@ int via_driver_load(struct drm_device *dev, unsigned long chipset)
 	drm_via_private_t *dev_priv;
 	int ret = 0;
 
-	dev_priv = drm_calloc(1, sizeof(drm_via_private_t), DRM_MEM_DRIVER);
+	dev_priv = kzalloc(sizeof(drm_via_private_t), GFP_KERNEL);
 	if (dev_priv == NULL)
 		return -ENOMEM;
 
@@ -106,14 +106,14 @@ int via_driver_load(struct drm_device *dev, unsigned long chipset)
 
 	ret = drm_sman_init(&dev_priv->sman, 2, 12, 8);
 	if (ret) {
-		drm_free(dev_priv, sizeof(*dev_priv), DRM_MEM_DRIVER);
+		kfree(dev_priv);
 		return ret;
 	}
 
 	ret = drm_vblank_init(dev, 1);
 	if (ret) {
 		drm_sman_takedown(&dev_priv->sman);
-		drm_free(dev_priv, sizeof(drm_via_private_t), DRM_MEM_DRIVER);
+		kfree(dev_priv);
 		return ret;
 	}
 
@@ -126,7 +126,7 @@ int via_driver_unload(struct drm_device *dev)
 
 	drm_sman_takedown(&dev_priv->sman);
 
-	drm_free(dev_priv, sizeof(drm_via_private_t), DRM_MEM_DRIVER);
+	kfree(dev_priv);
 
 	return 0;
 }
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 3c259ee7ddd..aa87b6a3bbe 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -326,6 +326,15 @@ config I2C_DAVINCI
 	  devices such as DaVinci NIC.
 	  For details please see http://www.ti.com/davinci
 
+config I2C_DESIGNWARE
+	tristate "Synopsys DesignWare"
+	help
+	  If you say yes to this option, support will be included for the
+	  Synopsys DesignWare I2C adapter. Only master mode is supported.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-designware.
+
 config I2C_GPIO
 	tristate "GPIO-based bitbanging I2C"
 	depends on GENERIC_GPIO
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index edeabf00310..e654263bfc0 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_I2C_AU1550)	+= i2c-au1550.o
 obj-$(CONFIG_I2C_BLACKFIN_TWI)	+= i2c-bfin-twi.o
 obj-$(CONFIG_I2C_CPM)		+= i2c-cpm.o
 obj-$(CONFIG_I2C_DAVINCI)	+= i2c-davinci.o
+obj-$(CONFIG_I2C_DESIGNWARE)	+= i2c-designware.o
 obj-$(CONFIG_I2C_GPIO)		+= i2c-gpio.o
 obj-$(CONFIG_I2C_HIGHLANDER)	+= i2c-highlander.o
 obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic.o
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index b5db8b88361..9c2e10082b7 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -140,7 +140,7 @@ static irqreturn_t cpm_i2c_interrupt(int irq, void *dev_id)
 
 	dev_dbg(&adap->dev, "Interrupt: %x\n", i);
 
-	wake_up_interruptible(&cpm->i2c_wait);
+	wake_up(&cpm->i2c_wait);
 
 	return i ? IRQ_HANDLED : IRQ_NONE;
 }
@@ -364,12 +364,12 @@ static int cpm_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 		dev_dbg(&adap->dev, "test ready.\n");
 		pmsg = &msgs[tptr];
 		if (pmsg->flags & I2C_M_RD)
-			ret = wait_event_interruptible_timeout(cpm->i2c_wait,
+			ret = wait_event_timeout(cpm->i2c_wait,
 				(in_be16(&tbdf[tptr].cbd_sc) & BD_SC_NAK) ||
 				!(in_be16(&rbdf[rptr].cbd_sc) & BD_SC_EMPTY),
 				1 * HZ);
 		else
-			ret = wait_event_interruptible_timeout(cpm->i2c_wait,
+			ret = wait_event_timeout(cpm->i2c_wait,
 				!(in_be16(&tbdf[tptr].cbd_sc) & BD_SC_READY),
 				1 * HZ);
 		if (ret == 0) {
diff --git a/drivers/i2c/busses/i2c-designware.c b/drivers/i2c/busses/i2c-designware.c
new file mode 100644
index 00000000000..b444762e9b9
--- /dev/null
+++ b/drivers/i2c/busses/i2c-designware.c
@@ -0,0 +1,624 @@
+/*
+ * Synopsys Designware I2C adapter driver (master only).
+ *
+ * Based on the TI DAVINCI I2C adapter driver.
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software Inc.
+ * Copyright (C) 2009 Provigent Ltd.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+/*
+ * Registers offset
+ */
+#define DW_IC_CON		0x0
+#define DW_IC_TAR		0x4
+#define DW_IC_DATA_CMD		0x10
+#define DW_IC_SS_SCL_HCNT	0x14
+#define DW_IC_SS_SCL_LCNT	0x18
+#define DW_IC_FS_SCL_HCNT	0x1c
+#define DW_IC_FS_SCL_LCNT	0x20
+#define DW_IC_INTR_STAT		0x2c
+#define DW_IC_INTR_MASK		0x30
+#define DW_IC_CLR_INTR		0x40
+#define DW_IC_ENABLE		0x6c
+#define DW_IC_STATUS		0x70
+#define DW_IC_TXFLR		0x74
+#define DW_IC_RXFLR		0x78
+#define DW_IC_COMP_PARAM_1	0xf4
+#define DW_IC_TX_ABRT_SOURCE	0x80
+
+#define DW_IC_CON_MASTER		0x1
+#define DW_IC_CON_SPEED_STD		0x2
+#define DW_IC_CON_SPEED_FAST		0x4
+#define DW_IC_CON_10BITADDR_MASTER	0x10
+#define DW_IC_CON_RESTART_EN		0x20
+#define DW_IC_CON_SLAVE_DISABLE		0x40
+
+#define DW_IC_INTR_TX_EMPTY	0x10
+#define DW_IC_INTR_TX_ABRT	0x40
+#define DW_IC_INTR_STOP_DET	0x200
+
+#define DW_IC_STATUS_ACTIVITY	0x1
+
+#define DW_IC_ERR_TX_ABRT	0x1
+
+/*
+ * status codes
+ */
+#define STATUS_IDLE			0x0
+#define STATUS_WRITE_IN_PROGRESS	0x1
+#define STATUS_READ_IN_PROGRESS		0x2
+
+#define TIMEOUT			20 /* ms */
+
+/*
+ * hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
+ *
+ * only expected abort codes are listed here
+ * refer to the datasheet for the full list
+ */
+#define ABRT_7B_ADDR_NOACK	0
+#define ABRT_10ADDR1_NOACK	1
+#define ABRT_10ADDR2_NOACK	2
+#define ABRT_TXDATA_NOACK	3
+#define ABRT_GCALL_NOACK	4
+#define ABRT_GCALL_READ		5
+#define ABRT_SBYTE_ACKDET	7
+#define ABRT_SBYTE_NORSTRT	9
+#define ABRT_10B_RD_NORSTRT	10
+#define ARB_MASTER_DIS		11
+#define ARB_LOST		12
+
+static char *abort_sources[] = {
+	[ABRT_7B_ADDR_NOACK]	=
+		"slave address not acknowledged (7bit mode)",
+	[ABRT_10ADDR1_NOACK]	=
+		"first address byte not acknowledged (10bit mode)",
+	[ABRT_10ADDR2_NOACK]	=
+		"second address byte not acknowledged (10bit mode)",
+	[ABRT_TXDATA_NOACK]		=
+		"data not acknowledged",
+	[ABRT_GCALL_NOACK]		=
+		"no acknowledgement for a general call",
+	[ABRT_GCALL_READ]		=
+		"read after general call",
+	[ABRT_SBYTE_ACKDET]		=
+		"start byte acknowledged",
+	[ABRT_SBYTE_NORSTRT]	=
+		"trying to send start byte when restart is disabled",
+	[ABRT_10B_RD_NORSTRT]	=
+		"trying to read when restart is disabled (10bit mode)",
+	[ARB_MASTER_DIS]		=
+		"trying to use disabled adapter",
+	[ARB_LOST]			=
+		"lost arbitration",
+};
+
+/**
+ * struct dw_i2c_dev - private i2c-designware data
+ * @dev: driver model device node
+ * @base: IO registers pointer
+ * @cmd_complete: tx completion indicator
+ * @pump_msg: continue in progress transfers
+ * @lock: protect this struct and IO registers
+ * @clk: input reference clock
+ * @cmd_err: run time hadware error code
+ * @msgs: points to an array of messages currently being transfered
+ * @msgs_num: the number of elements in msgs
+ * @msg_write_idx: the element index of the current tx message in the msgs
+ *	array
+ * @tx_buf_len: the length of the current tx buffer
+ * @tx_buf: the current tx buffer
+ * @msg_read_idx: the element index of the current rx message in the msgs
+ *	array
+ * @rx_buf_len: the length of the current rx buffer
+ * @rx_buf: the current rx buffer
+ * @msg_err: error status of the current transfer
+ * @status: i2c master status, one of STATUS_*
+ * @abort_source: copy of the TX_ABRT_SOURCE register
+ * @irq: interrupt number for the i2c master
+ * @adapter: i2c subsystem adapter node
+ * @tx_fifo_depth: depth of the hardware tx fifo
+ * @rx_fifo_depth: depth of the hardware rx fifo
+ */
+struct dw_i2c_dev {
+	struct device		*dev;
+	void __iomem		*base;
+	struct completion	cmd_complete;
+	struct tasklet_struct	pump_msg;
+	struct mutex		lock;
+	struct clk		*clk;
+	int			cmd_err;
+	struct i2c_msg		*msgs;
+	int			msgs_num;
+	int			msg_write_idx;
+	u16			tx_buf_len;
+	u8			*tx_buf;
+	int			msg_read_idx;
+	u16			rx_buf_len;
+	u8			*rx_buf;
+	int			msg_err;
+	unsigned int		status;
+	u16			abort_source;
+	int			irq;
+	struct i2c_adapter	adapter;
+	unsigned int		tx_fifo_depth;
+	unsigned int		rx_fifo_depth;
+};
+
+/**
+ * i2c_dw_init() - initialize the designware i2c master hardware
+ * @dev: device private data
+ *
+ * This functions configures and enables the I2C master.
+ * This function is called during I2C init function, and in case of timeout at
+ * run time.
+ */
+static void i2c_dw_init(struct dw_i2c_dev *dev)
+{
+	u32 input_clock_khz = clk_get_rate(dev->clk) / 1000;
+	u16 ic_con;
+
+	/* Disable the adapter */
+	writeb(0, dev->base + DW_IC_ENABLE);
+
+	/* set standard and fast speed deviders for high/low periods */
+	writew((input_clock_khz * 40 / 10000)+1, /* std speed high, 4us */
+			dev->base + DW_IC_SS_SCL_HCNT);
+	writew((input_clock_khz * 47 / 10000)+1, /* std speed low, 4.7us */
+			dev->base + DW_IC_SS_SCL_LCNT);
+	writew((input_clock_khz *  6 / 10000)+1, /* fast speed high, 0.6us */
+			dev->base + DW_IC_FS_SCL_HCNT);
+	writew((input_clock_khz * 13 / 10000)+1, /* fast speed low, 1.3us */
+			dev->base + DW_IC_FS_SCL_LCNT);
+
+	/* configure the i2c master */
+	ic_con = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
+		DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST;
+	writew(ic_con, dev->base + DW_IC_CON);
+}
+
+/*
+ * Waiting for bus not busy
+ */
+static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
+{
+	int timeout = TIMEOUT;
+
+	while (readb(dev->base + DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
+		if (timeout <= 0) {
+			dev_warn(dev->dev, "timeout waiting for bus ready\n");
+			return -ETIMEDOUT;
+		}
+		timeout--;
+		mdelay(1);
+	}
+
+	return 0;
+}
+
+/*
+ * Initiate low level master read/write transaction.
+ * This function is called from i2c_dw_xfer when starting a transfer.
+ * This function is also called from dw_i2c_pump_msg to continue a transfer
+ * that is longer than the size of the TX FIFO.
+ */
+static void
+i2c_dw_xfer_msg(struct i2c_adapter *adap)
+{
+	struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
+	struct i2c_msg *msgs = dev->msgs;
+	int num = dev->msgs_num;
+	u16 ic_con, intr_mask;
+	int tx_limit = dev->tx_fifo_depth - readb(dev->base + DW_IC_TXFLR);
+	int rx_limit = dev->rx_fifo_depth - readb(dev->base + DW_IC_RXFLR);
+	u16 addr = msgs[dev->msg_write_idx].addr;
+	u16 buf_len = dev->tx_buf_len;
+
+	if (!(dev->status & STATUS_WRITE_IN_PROGRESS)) {
+		/* Disable the adapter */
+		writeb(0, dev->base + DW_IC_ENABLE);
+
+		/* set the slave (target) address */
+		writew(msgs[dev->msg_write_idx].addr, dev->base + DW_IC_TAR);
+
+		/* if the slave address is ten bit address, enable 10BITADDR */
+		ic_con = readw(dev->base + DW_IC_CON);
+		if (msgs[dev->msg_write_idx].flags & I2C_M_TEN)
+			ic_con |= DW_IC_CON_10BITADDR_MASTER;
+		else
+			ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
+		writew(ic_con, dev->base + DW_IC_CON);
+
+		/* Enable the adapter */
+		writeb(1, dev->base + DW_IC_ENABLE);
+	}
+
+	for (; dev->msg_write_idx < num; dev->msg_write_idx++) {
+		/* if target address has changed, we need to
+		 * reprogram the target address in the i2c
+		 * adapter when we are done with this transfer
+		 */
+		if (msgs[dev->msg_write_idx].addr != addr)
+			return;
+
+		if (msgs[dev->msg_write_idx].len == 0) {
+			dev_err(dev->dev,
+				"%s: invalid message length\n", __func__);
+			dev->msg_err = -EINVAL;
+			return;
+		}
+
+		if (!(dev->status & STATUS_WRITE_IN_PROGRESS)) {
+			/* new i2c_msg */
+			dev->tx_buf = msgs[dev->msg_write_idx].buf;
+			buf_len = msgs[dev->msg_write_idx].len;
+		}
+
+		while (buf_len > 0 && tx_limit > 0 && rx_limit > 0) {
+			if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
+				writew(0x100, dev->base + DW_IC_DATA_CMD);
+				rx_limit--;
+			} else
+				writew(*(dev->tx_buf++),
+						dev->base + DW_IC_DATA_CMD);
+			tx_limit--; buf_len--;
+		}
+	}
+
+	intr_mask = DW_IC_INTR_STOP_DET | DW_IC_INTR_TX_ABRT;
+	if (buf_len > 0) { /* more bytes to be written */
+		intr_mask |= DW_IC_INTR_TX_EMPTY;
+		dev->status |= STATUS_WRITE_IN_PROGRESS;
+	} else
+		dev->status &= ~STATUS_WRITE_IN_PROGRESS;
+	writew(intr_mask, dev->base + DW_IC_INTR_MASK);
+
+	dev->tx_buf_len = buf_len;
+}
+
+static void
+i2c_dw_read(struct i2c_adapter *adap)
+{
+	struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
+	struct i2c_msg *msgs = dev->msgs;
+	int num = dev->msgs_num;
+	u16 addr = msgs[dev->msg_read_idx].addr;
+	int rx_valid = readw(dev->base + DW_IC_RXFLR);
+
+	for (; dev->msg_read_idx < num; dev->msg_read_idx++) {
+		u16 len;
+		u8 *buf;
+
+		if (!(msgs[dev->msg_read_idx].flags & I2C_M_RD))
+			continue;
+
+		/* different i2c client, reprogram the i2c adapter */
+		if (msgs[dev->msg_read_idx].addr != addr)
+			return;
+
+		if (!(dev->status & STATUS_READ_IN_PROGRESS)) {
+			len = msgs[dev->msg_read_idx].len;
+			buf = msgs[dev->msg_read_idx].buf;
+		} else {
+			len = dev->rx_buf_len;
+			buf = dev->rx_buf;
+		}
+
+		for (; len > 0 && rx_valid > 0; len--, rx_valid--)
+			*buf++ = readb(dev->base + DW_IC_DATA_CMD);
+
+		if (len > 0) {
+			dev->status |= STATUS_READ_IN_PROGRESS;
+			dev->rx_buf_len = len;
+			dev->rx_buf = buf;
+			return;
+		} else
+			dev->status &= ~STATUS_READ_IN_PROGRESS;
+	}
+}
+
+/*
+ * Prepare controller for a transaction and call i2c_dw_xfer_msg
+ */
+static int
+i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
+	struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
+	int ret;
+
+	dev_dbg(dev->dev, "%s: msgs: %d\n", __func__, num);
+
+	mutex_lock(&dev->lock);
+
+	INIT_COMPLETION(dev->cmd_complete);
+	dev->msgs = msgs;
+	dev->msgs_num = num;
+	dev->cmd_err = 0;
+	dev->msg_write_idx = 0;
+	dev->msg_read_idx = 0;
+	dev->msg_err = 0;
+	dev->status = STATUS_IDLE;
+
+	ret = i2c_dw_wait_bus_not_busy(dev);
+	if (ret < 0)
+		goto done;
+
+	/* start the transfers */
+	i2c_dw_xfer_msg(adap);
+
+	/* wait for tx to complete */
+	ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete, HZ);
+	if (ret == 0) {
+		dev_err(dev->dev, "controller timed out\n");
+		i2c_dw_init(dev);
+		ret = -ETIMEDOUT;
+		goto done;
+	} else if (ret < 0)
+		goto done;
+
+	if (dev->msg_err) {
+		ret = dev->msg_err;
+		goto done;
+	}
+
+	/* no error */
+	if (likely(!dev->cmd_err)) {
+		/* read rx fifo, and disable the adapter */
+		do {
+			i2c_dw_read(adap);
+		} while (dev->status & STATUS_READ_IN_PROGRESS);
+		writeb(0, dev->base + DW_IC_ENABLE);
+		ret = num;
+		goto done;
+	}
+
+	/* We have an error */
+	if (dev->cmd_err == DW_IC_ERR_TX_ABRT) {
+		unsigned long abort_source = dev->abort_source;
+		int i;
+
+		for_each_bit(i, &abort_source, ARRAY_SIZE(abort_sources)) {
+		    dev_err(dev->dev, "%s: %s\n", __func__, abort_sources[i]);
+		}
+	}
+	ret = -EIO;
+
+done:
+	mutex_unlock(&dev->lock);
+
+	return ret;
+}
+
+static u32 i2c_dw_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR;
+}
+
+static void dw_i2c_pump_msg(unsigned long data)
+{
+	struct dw_i2c_dev *dev = (struct dw_i2c_dev *) data;
+	u16 intr_mask;
+
+	i2c_dw_read(&dev->adapter);
+	i2c_dw_xfer_msg(&dev->adapter);
+
+	intr_mask = DW_IC_INTR_STOP_DET | DW_IC_INTR_TX_ABRT;
+	if (dev->status & STATUS_WRITE_IN_PROGRESS)
+		intr_mask |= DW_IC_INTR_TX_EMPTY;
+	writew(intr_mask, dev->base + DW_IC_INTR_MASK);
+}
+
+/*
+ * Interrupt service routine. This gets called whenever an I2C interrupt
+ * occurs.
+ */
+static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
+{
+	struct dw_i2c_dev *dev = dev_id;
+	u16 stat;
+
+	stat = readw(dev->base + DW_IC_INTR_STAT);
+	dev_dbg(dev->dev, "%s: stat=0x%x\n", __func__, stat);
+	if (stat & DW_IC_INTR_TX_ABRT) {
+		dev->abort_source = readw(dev->base + DW_IC_TX_ABRT_SOURCE);
+		dev->cmd_err |= DW_IC_ERR_TX_ABRT;
+		dev->status = STATUS_IDLE;
+	} else if (stat & DW_IC_INTR_TX_EMPTY)
+		tasklet_schedule(&dev->pump_msg);
+
+	readb(dev->base + DW_IC_CLR_INTR);	/* clear interrupts */
+	writew(0, dev->base + DW_IC_INTR_MASK);	/* disable interrupts */
+	if (stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET))
+		complete(&dev->cmd_complete);
+
+	return IRQ_HANDLED;
+}
+
+static struct i2c_algorithm i2c_dw_algo = {
+	.master_xfer	= i2c_dw_xfer,
+	.functionality	= i2c_dw_func,
+};
+
+static int __devinit dw_i2c_probe(struct platform_device *pdev)
+{
+	struct dw_i2c_dev *dev;
+	struct i2c_adapter *adap;
+	struct resource *mem, *irq, *ioarea;
+	int r;
+
+	/* NOTE: driver uses the static register mapping */
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem) {
+		dev_err(&pdev->dev, "no mem resource?\n");
+		return -EINVAL;
+	}
+
+	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!irq) {
+		dev_err(&pdev->dev, "no irq resource?\n");
+		return -EINVAL;
+	}
+
+	ioarea = request_mem_region(mem->start, resource_size(mem),
+			pdev->name);
+	if (!ioarea) {
+		dev_err(&pdev->dev, "I2C region already claimed\n");
+		return -EBUSY;
+	}
+
+	dev = kzalloc(sizeof(struct dw_i2c_dev), GFP_KERNEL);
+	if (!dev) {
+		r = -ENOMEM;
+		goto err_release_region;
+	}
+
+	init_completion(&dev->cmd_complete);
+	tasklet_init(&dev->pump_msg, dw_i2c_pump_msg, (unsigned long) dev);
+	mutex_init(&dev->lock);
+	dev->dev = get_device(&pdev->dev);
+	dev->irq = irq->start;
+	platform_set_drvdata(pdev, dev);
+
+	dev->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(dev->clk)) {
+		r = -ENODEV;
+		goto err_free_mem;
+	}
+	clk_enable(dev->clk);
+
+	dev->base = ioremap(mem->start, resource_size(mem));
+	if (dev->base == NULL) {
+		dev_err(&pdev->dev, "failure mapping io resources\n");
+		r = -EBUSY;
+		goto err_unuse_clocks;
+	}
+	{
+		u32 param1 = readl(dev->base + DW_IC_COMP_PARAM_1);
+
+		dev->tx_fifo_depth = ((param1 >> 16) & 0xff) + 1;
+		dev->rx_fifo_depth = ((param1 >> 8)  & 0xff) + 1;
+	}
+	i2c_dw_init(dev);
+
+	writew(0, dev->base + DW_IC_INTR_MASK); /* disable IRQ */
+	r = request_irq(dev->irq, i2c_dw_isr, 0, pdev->name, dev);
+	if (r) {
+		dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
+		goto err_iounmap;
+	}
+
+	adap = &dev->adapter;
+	i2c_set_adapdata(adap, dev);
+	adap->owner = THIS_MODULE;
+	adap->class = I2C_CLASS_HWMON;
+	strlcpy(adap->name, "Synopsys DesignWare I2C adapter",
+			sizeof(adap->name));
+	adap->algo = &i2c_dw_algo;
+	adap->dev.parent = &pdev->dev;
+
+	adap->nr = pdev->id;
+	r = i2c_add_numbered_adapter(adap);
+	if (r) {
+		dev_err(&pdev->dev, "failure adding adapter\n");
+		goto err_free_irq;
+	}
+
+	return 0;
+
+err_free_irq:
+	free_irq(dev->irq, dev);
+err_iounmap:
+	iounmap(dev->base);
+err_unuse_clocks:
+	clk_disable(dev->clk);
+	clk_put(dev->clk);
+	dev->clk = NULL;
+err_free_mem:
+	platform_set_drvdata(pdev, NULL);
+	put_device(&pdev->dev);
+	kfree(dev);
+err_release_region:
+	release_mem_region(mem->start, resource_size(mem));
+
+	return r;
+}
+
+static int __devexit dw_i2c_remove(struct platform_device *pdev)
+{
+	struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
+	struct resource *mem;
+
+	platform_set_drvdata(pdev, NULL);
+	i2c_del_adapter(&dev->adapter);
+	put_device(&pdev->dev);
+
+	clk_disable(dev->clk);
+	clk_put(dev->clk);
+	dev->clk = NULL;
+
+	writeb(0, dev->base + DW_IC_ENABLE);
+	free_irq(dev->irq, dev);
+	kfree(dev);
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(mem->start, resource_size(mem));
+	return 0;
+}
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:i2c_designware");
+
+static struct platform_driver dw_i2c_driver = {
+	.remove		= __devexit_p(dw_i2c_remove),
+	.driver		= {
+		.name	= "i2c_designware",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init dw_i2c_init_driver(void)
+{
+	return platform_driver_probe(&dw_i2c_driver, dw_i2c_probe);
+}
+module_init(dw_i2c_init_driver);
+
+static void __exit dw_i2c_exit_driver(void)
+{
+	platform_driver_unregister(&dw_i2c_driver);
+}
+module_exit(dw_i2c_exit_driver);
+
+MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
+MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index dd778d7ae04..d325e86e310 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -197,7 +197,7 @@ int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, int prescaler)
 		return -EINVAL;
 
 	/* Determine divider value */
-	divider = mpc52xx_find_ipb_freq(node) / clock;
+	divider = mpc5xxx_get_bus_frequency(node) / clock;
 
 	/*
 	 * We want to choose an FDR/DFSR that generates an I2C bus speed that
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index b606db85525..ad8d2010c92 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -339,7 +339,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 		 * to get longer filter period for better noise suppression.
 		 * The filter is iclk (fclk for HS) period.
 		 */
-		if (dev->speed > 400 || cpu_is_omap_2430())
+		if (dev->speed > 400 || cpu_is_omap2430())
 			internal_clk = 19200;
 		else if (dev->speed > 100)
 			internal_clk = 9600;
diff --git a/drivers/i2c/i2c-boardinfo.c b/drivers/i2c/i2c-boardinfo.c
index ffb35f09df0..a26a34a0664 100644
--- a/drivers/i2c/i2c-boardinfo.c
+++ b/drivers/i2c/i2c-boardinfo.c
@@ -18,6 +18,7 @@
 
 #include <linux/kernel.h>
 #include <linux/i2c.h>
+#include <linux/rwsem.h>
 
 #include "i2c-core.h"
 
@@ -25,7 +26,7 @@
 /* These symbols are exported ONLY FOR the i2c core.
  * No other users will be supported.
  */
-DEFINE_MUTEX(__i2c_board_lock);
+DECLARE_RWSEM(__i2c_board_lock);
 EXPORT_SYMBOL_GPL(__i2c_board_lock);
 
 LIST_HEAD(__i2c_board_list);
@@ -63,7 +64,7 @@ i2c_register_board_info(int busnum,
 {
 	int status;
 
-	mutex_lock(&__i2c_board_lock);
+	down_write(&__i2c_board_lock);
 
 	/* dynamic bus numbers will be assigned after the last static one */
 	if (busnum >= __i2c_first_dynamic_bus_num)
@@ -84,7 +85,7 @@ i2c_register_board_info(int busnum,
 		list_add_tail(&devinfo->list, &__i2c_board_list);
 	}
 
-	mutex_unlock(&__i2c_board_lock);
+	up_write(&__i2c_board_lock);
 
 	return status;
 }
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 5ed622ee65c..0e45c296d3d 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -33,16 +33,20 @@
 #include <linux/completion.h>
 #include <linux/hardirq.h>
 #include <linux/irqflags.h>
+#include <linux/rwsem.h>
 #include <asm/uaccess.h>
 
 #include "i2c-core.h"
 
 
+/* core_lock protects i2c_adapter_idr, userspace_devices, and guarantees
+   that device detection, deletion of detected devices, and attach_adapter
+   and detach_adapter calls are serialized */
 static DEFINE_MUTEX(core_lock);
 static DEFINE_IDR(i2c_adapter_idr);
+static LIST_HEAD(userspace_devices);
 
-#define is_newstyle_driver(d) ((d)->probe || (d)->remove || (d)->detect)
-
+static int i2c_check_addr(struct i2c_adapter *adapter, int addr);
 static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver);
 
 /* ------------------------------------------------------------------------- */
@@ -63,12 +67,6 @@ static int i2c_device_match(struct device *dev, struct device_driver *drv)
 	struct i2c_client	*client = to_i2c_client(dev);
 	struct i2c_driver	*driver = to_i2c_driver(drv);
 
-	/* make legacy i2c drivers bypass driver model probing entirely;
-	 * such drivers scan each i2c adapter/bus themselves.
-	 */
-	if (!is_newstyle_driver(driver))
-		return 0;
-
 	/* match on an id table if there is one */
 	if (driver->id_table)
 		return i2c_match_id(driver->id_table, client) != NULL;
@@ -83,10 +81,6 @@ static int i2c_device_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
 	struct i2c_client	*client = to_i2c_client(dev);
 
-	/* by definition, legacy drivers can't hotplug */
-	if (dev->driver)
-		return 0;
-
 	if (add_uevent_var(env, "MODALIAS=%s%s",
 			   I2C_MODULE_PREFIX, client->name))
 		return -ENOMEM;
@@ -175,12 +169,6 @@ static int i2c_device_resume(struct device *dev)
 	return driver->resume(to_i2c_client(dev));
 }
 
-static void i2c_client_release(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	complete(&client->released);
-}
-
 static void i2c_client_dev_release(struct device *dev)
 {
 	kfree(to_i2c_client(dev));
@@ -240,15 +228,17 @@ EXPORT_SYMBOL(i2c_verify_client);
 
 
 /**
- * i2c_new_device - instantiate an i2c device for use with a new style driver
+ * i2c_new_device - instantiate an i2c device
  * @adap: the adapter managing the device
  * @info: describes one I2C device; bus_num is ignored
  * Context: can sleep
  *
- * Create a device to work with a new style i2c driver, where binding is
- * handled through driver model probe()/remove() methods.  This call is not
- * appropriate for use by mainboad initialization logic, which usually runs
- * during an arch_initcall() long before any i2c_adapter could exist.
+ * Create an i2c device. Binding is handled through driver model
+ * probe()/remove() methods.  A driver may be bound to this device when we
+ * return from this function, or any later moment (e.g. maybe hotplugging will
+ * load the driver module).  This call is not appropriate for use by mainboard
+ * initialization logic, which usually runs during an arch_initcall() long
+ * before any i2c_adapter could exist.
  *
  * This returns the new i2c client, which may be saved for later use with
  * i2c_unregister_device(); or NULL to indicate an error.
@@ -276,17 +266,31 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
 
 	strlcpy(client->name, info->type, sizeof(client->name));
 
-	/* a new style driver may be bound to this device when we
-	 * return from this function, or any later moment (e.g. maybe
-	 * hotplugging will load the driver module).  and the device
-	 * refcount model is the standard driver model one.
-	 */
-	status = i2c_attach_client(client);
-	if (status < 0) {
-		kfree(client);
-		client = NULL;
-	}
+	/* Check for address business */
+	status = i2c_check_addr(adap, client->addr);
+	if (status)
+		goto out_err;
+
+	client->dev.parent = &client->adapter->dev;
+	client->dev.bus = &i2c_bus_type;
+	client->dev.release = i2c_client_dev_release;
+
+	dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adap),
+		     client->addr);
+	status = device_register(&client->dev);
+	if (status)
+		goto out_err;
+
+	dev_dbg(&adap->dev, "client [%s] registered with bus id %s\n",
+		client->name, dev_name(&client->dev));
+
 	return client;
+
+out_err:
+	dev_err(&adap->dev, "Failed to register i2c client %s at 0x%02x "
+		"(%d)\n", client->name, client->addr, status);
+	kfree(client);
+	return NULL;
 }
 EXPORT_SYMBOL_GPL(i2c_new_device);
 
@@ -298,28 +302,6 @@ EXPORT_SYMBOL_GPL(i2c_new_device);
  */
 void i2c_unregister_device(struct i2c_client *client)
 {
-	struct i2c_adapter	*adapter = client->adapter;
-	struct i2c_driver	*driver = client->driver;
-
-	if (driver && !is_newstyle_driver(driver)) {
-		dev_err(&client->dev, "can't unregister devices "
-			"with legacy drivers\n");
-		WARN_ON(1);
-		return;
-	}
-
-	if (adapter->client_unregister) {
-		if (adapter->client_unregister(client)) {
-			dev_warn(&client->dev,
-				 "client_unregister [%s] failed\n",
-				 client->name);
-		}
-	}
-
-	mutex_lock(&adapter->clist_lock);
-	list_del(&client->list);
-	mutex_unlock(&adapter->clist_lock);
-
 	device_unregister(&client->dev);
 }
 EXPORT_SYMBOL_GPL(i2c_unregister_device);
@@ -393,8 +375,128 @@ show_adapter_name(struct device *dev, struct device_attribute *attr, char *buf)
 	return sprintf(buf, "%s\n", adap->name);
 }
 
+/*
+ * Let users instantiate I2C devices through sysfs. This can be used when
+ * platform initialization code doesn't contain the proper data for
+ * whatever reason. Also useful for drivers that do device detection and
+ * detection fails, either because the device uses an unexpected address,
+ * or this is a compatible device with different ID register values.
+ *
+ * Parameter checking may look overzealous, but we really don't want
+ * the user to provide incorrect parameters.
+ */
+static ssize_t
+i2c_sysfs_new_device(struct device *dev, struct device_attribute *attr,
+		     const char *buf, size_t count)
+{
+	struct i2c_adapter *adap = to_i2c_adapter(dev);
+	struct i2c_board_info info;
+	struct i2c_client *client;
+	char *blank, end;
+	int res;
+
+	dev_warn(dev, "The new_device interface is still experimental "
+		 "and may change in a near future\n");
+	memset(&info, 0, sizeof(struct i2c_board_info));
+
+	blank = strchr(buf, ' ');
+	if (!blank) {
+		dev_err(dev, "%s: Missing parameters\n", "new_device");
+		return -EINVAL;
+	}
+	if (blank - buf > I2C_NAME_SIZE - 1) {
+		dev_err(dev, "%s: Invalid device name\n", "new_device");
+		return -EINVAL;
+	}
+	memcpy(info.type, buf, blank - buf);
+
+	/* Parse remaining parameters, reject extra parameters */
+	res = sscanf(++blank, "%hi%c", &info.addr, &end);
+	if (res < 1) {
+		dev_err(dev, "%s: Can't parse I2C address\n", "new_device");
+		return -EINVAL;
+	}
+	if (res > 1  && end != '\n') {
+		dev_err(dev, "%s: Extra parameters\n", "new_device");
+		return -EINVAL;
+	}
+
+	if (info.addr < 0x03 || info.addr > 0x77) {
+		dev_err(dev, "%s: Invalid I2C address 0x%hx\n", "new_device",
+			info.addr);
+		return -EINVAL;
+	}
+
+	client = i2c_new_device(adap, &info);
+	if (!client)
+		return -EEXIST;
+
+	/* Keep track of the added device */
+	mutex_lock(&core_lock);
+	list_add_tail(&client->detected, &userspace_devices);
+	mutex_unlock(&core_lock);
+	dev_info(dev, "%s: Instantiated device %s at 0x%02hx\n", "new_device",
+		 info.type, info.addr);
+
+	return count;
+}
+
+/*
+ * And of course let the users delete the devices they instantiated, if
+ * they got it wrong. This interface can only be used to delete devices
+ * instantiated by i2c_sysfs_new_device above. This guarantees that we
+ * don't delete devices to which some kernel code still has references.
+ *
+ * Parameter checking may look overzealous, but we really don't want
+ * the user to delete the wrong device.
+ */
+static ssize_t
+i2c_sysfs_delete_device(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	struct i2c_adapter *adap = to_i2c_adapter(dev);
+	struct i2c_client *client, *next;
+	unsigned short addr;
+	char end;
+	int res;
+
+	/* Parse parameters, reject extra parameters */
+	res = sscanf(buf, "%hi%c", &addr, &end);
+	if (res < 1) {
+		dev_err(dev, "%s: Can't parse I2C address\n", "delete_device");
+		return -EINVAL;
+	}
+	if (res > 1  && end != '\n') {
+		dev_err(dev, "%s: Extra parameters\n", "delete_device");
+		return -EINVAL;
+	}
+
+	/* Make sure the device was added through sysfs */
+	res = -ENOENT;
+	mutex_lock(&core_lock);
+	list_for_each_entry_safe(client, next, &userspace_devices, detected) {
+		if (client->addr == addr && client->adapter == adap) {
+			dev_info(dev, "%s: Deleting device %s at 0x%02hx\n",
+				 "delete_device", client->name, client->addr);
+
+			list_del(&client->detected);
+			i2c_unregister_device(client);
+			res = count;
+			break;
+		}
+	}
+	mutex_unlock(&core_lock);
+
+	if (res < 0)
+		dev_err(dev, "%s: Can't find device in list\n",
+			"delete_device");
+	return res;
+}
+
 static struct device_attribute i2c_adapter_attrs[] = {
 	__ATTR(name, S_IRUGO, show_adapter_name, NULL),
+	__ATTR(new_device, S_IWUSR, NULL, i2c_sysfs_new_device),
+	__ATTR(delete_device, S_IWUSR, NULL, i2c_sysfs_delete_device),
 	{ },
 };
 
@@ -408,7 +510,7 @@ static void i2c_scan_static_board_info(struct i2c_adapter *adapter)
 {
 	struct i2c_devinfo	*devinfo;
 
-	mutex_lock(&__i2c_board_lock);
+	down_read(&__i2c_board_lock);
 	list_for_each_entry(devinfo, &__i2c_board_list, list) {
 		if (devinfo->busnum == adapter->nr
 				&& !i2c_new_device(adapter,
@@ -417,7 +519,7 @@ static void i2c_scan_static_board_info(struct i2c_adapter *adapter)
 				"Can't create device at 0x%02x\n",
 				devinfo->board_info.addr);
 	}
-	mutex_unlock(&__i2c_board_lock);
+	up_read(&__i2c_board_lock);
 }
 
 static int i2c_do_add_adapter(struct device_driver *d, void *data)
@@ -441,14 +543,12 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 	int res = 0, dummy;
 
 	/* Can't register until after driver model init */
-	if (unlikely(WARN_ON(!i2c_bus_type.p)))
-		return -EAGAIN;
+	if (unlikely(WARN_ON(!i2c_bus_type.p))) {
+		res = -EAGAIN;
+		goto out_list;
+	}
 
 	mutex_init(&adap->bus_lock);
-	mutex_init(&adap->clist_lock);
-	INIT_LIST_HEAD(&adap->clients);
-
-	mutex_lock(&core_lock);
 
 	/* Set default timeout to 1 second if not already set */
 	if (adap->timeout == 0)
@@ -463,21 +563,23 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 
 	dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);
 
-	/* create pre-declared device nodes for new-style drivers */
+	/* create pre-declared device nodes */
 	if (adap->nr < __i2c_first_dynamic_bus_num)
 		i2c_scan_static_board_info(adap);
 
 	/* Notify drivers */
+	mutex_lock(&core_lock);
 	dummy = bus_for_each_drv(&i2c_bus_type, NULL, adap,
 				 i2c_do_add_adapter);
-
-out_unlock:
 	mutex_unlock(&core_lock);
-	return res;
+
+	return 0;
 
 out_list:
+	mutex_lock(&core_lock);
 	idr_remove(&i2c_adapter_idr, adap->nr);
-	goto out_unlock;
+	mutex_unlock(&core_lock);
+	return res;
 }
 
 /**
@@ -596,6 +698,14 @@ static int i2c_do_del_adapter(struct device_driver *d, void *data)
 	return res;
 }
 
+static int __unregister_client(struct device *dev, void *dummy)
+{
+	struct i2c_client *client = i2c_verify_client(dev);
+	if (client)
+		i2c_unregister_device(client);
+	return 0;
+}
+
 /**
  * i2c_del_adapter - unregister I2C adapter
  * @adap: the adapter being unregistered
@@ -606,46 +716,30 @@ static int i2c_do_del_adapter(struct device_driver *d, void *data)
  */
 int i2c_del_adapter(struct i2c_adapter *adap)
 {
-	struct i2c_client *client, *_n;
 	int res = 0;
-
-	mutex_lock(&core_lock);
+	struct i2c_adapter *found;
 
 	/* First make sure that this adapter was ever added */
-	if (idr_find(&i2c_adapter_idr, adap->nr) != adap) {
+	mutex_lock(&core_lock);
+	found = idr_find(&i2c_adapter_idr, adap->nr);
+	mutex_unlock(&core_lock);
+	if (found != adap) {
 		pr_debug("i2c-core: attempting to delete unregistered "
 			 "adapter [%s]\n", adap->name);
-		res = -EINVAL;
-		goto out_unlock;
+		return -EINVAL;
 	}
 
 	/* Tell drivers about this removal */
+	mutex_lock(&core_lock);
 	res = bus_for_each_drv(&i2c_bus_type, NULL, adap,
 			       i2c_do_del_adapter);
+	mutex_unlock(&core_lock);
 	if (res)
-		goto out_unlock;
-
-	/* detach any active clients. This must be done first, because
-	 * it can fail; in which case we give up. */
-	list_for_each_entry_safe_reverse(client, _n, &adap->clients, list) {
-		struct i2c_driver	*driver;
-
-		driver = client->driver;
-
-		/* new style, follow standard driver model */
-		if (!driver || is_newstyle_driver(driver)) {
-			i2c_unregister_device(client);
-			continue;
-		}
+		return res;
 
-		/* legacy drivers create and remove clients themselves */
-		if ((res = driver->detach_client(client))) {
-			dev_err(&adap->dev, "detach_client failed for client "
-				"[%s] at address 0x%02x\n", client->name,
-				client->addr);
-			goto out_unlock;
-		}
-	}
+	/* Detach any active clients. This can't fail, thus we do not
+	   checking the returned value. */
+	res = device_for_each_child(&adap->dev, NULL, __unregister_client);
 
 	/* clean up the sysfs representation */
 	init_completion(&adap->dev_released);
@@ -655,7 +749,9 @@ int i2c_del_adapter(struct i2c_adapter *adap)
 	wait_for_completion(&adap->dev_released);
 
 	/* free bus id */
+	mutex_lock(&core_lock);
 	idr_remove(&i2c_adapter_idr, adap->nr);
+	mutex_unlock(&core_lock);
 
 	dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name);
 
@@ -663,9 +759,7 @@ int i2c_del_adapter(struct i2c_adapter *adap)
 	   added again */
 	memset(&adap->dev, 0, sizeof(adap->dev));
 
- out_unlock:
-	mutex_unlock(&core_lock);
-	return res;
+	return 0;
 }
 EXPORT_SYMBOL(i2c_del_adapter);
 
@@ -688,11 +782,7 @@ static int __attach_adapter(struct device *dev, void *data)
 
 /*
  * An i2c_driver is used with one or more i2c_client (device) nodes to access
- * i2c slave chips, on a bus instance associated with some i2c_adapter.  There
- * are two models for binding the driver to its device:  "new style" drivers
- * follow the standard Linux driver model and just respond to probe() calls
- * issued if the driver core sees they match(); "legacy" drivers create device
- * nodes themselves.
+ * i2c slave chips, on a bus instance associated with some i2c_adapter.
  */
 
 int i2c_register_driver(struct module *owner, struct i2c_driver *driver)
@@ -703,37 +793,26 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver)
 	if (unlikely(WARN_ON(!i2c_bus_type.p)))
 		return -EAGAIN;
 
-	/* new style driver methods can't mix with legacy ones */
-	if (is_newstyle_driver(driver)) {
-		if (driver->detach_adapter || driver->detach_client) {
-			printk(KERN_WARNING
-					"i2c-core: driver [%s] is confused\n",
-					driver->driver.name);
-			return -EINVAL;
-		}
-	}
-
 	/* add the driver to the list of i2c drivers in the driver core */
 	driver->driver.owner = owner;
 	driver->driver.bus = &i2c_bus_type;
 
-	/* for new style drivers, when registration returns the driver core
+	/* When registration returns, the driver core
 	 * will have called probe() for all matching-but-unbound devices.
 	 */
 	res = driver_register(&driver->driver);
 	if (res)
 		return res;
 
-	mutex_lock(&core_lock);
-
 	pr_debug("i2c-core: driver [%s] registered\n", driver->driver.name);
 
 	INIT_LIST_HEAD(&driver->clients);
 	/* Walk the adapters that are already present */
+	mutex_lock(&core_lock);
 	class_for_each_device(&i2c_adapter_class, NULL, driver,
 			      __attach_adapter);
-
 	mutex_unlock(&core_lock);
+
 	return 0;
 }
 EXPORT_SYMBOL(i2c_register_driver);
@@ -753,32 +832,11 @@ static int __detach_adapter(struct device *dev, void *data)
 		i2c_unregister_device(client);
 	}
 
-	if (is_newstyle_driver(driver))
-		return 0;
-
-	/* Have a look at each adapter, if clients of this driver are still
-	 * attached. If so, detach them to be able to kill the driver
-	 * afterwards.
-	 */
 	if (driver->detach_adapter) {
 		if (driver->detach_adapter(adapter))
 			dev_err(&adapter->dev,
 				"detach_adapter failed for driver [%s]\n",
 				driver->driver.name);
-	} else {
-		struct i2c_client *client, *_n;
-
-		list_for_each_entry_safe(client, _n, &adapter->clients, list) {
-			if (client->driver != driver)
-				continue;
-			dev_dbg(&adapter->dev,
-				"detaching client [%s] at 0x%02x\n",
-				client->name, client->addr);
-			if (driver->detach_client(client))
-				dev_err(&adapter->dev, "detach_client "
-					"failed for client [%s] at 0x%02x\n",
-					client->name, client->addr);
-		}
 	}
 
 	return 0;
@@ -792,14 +850,12 @@ static int __detach_adapter(struct device *dev, void *data)
 void i2c_del_driver(struct i2c_driver *driver)
 {
 	mutex_lock(&core_lock);
-
 	class_for_each_device(&i2c_adapter_class, NULL, driver,
 			      __detach_adapter);
+	mutex_unlock(&core_lock);
 
 	driver_unregister(&driver->driver);
 	pr_debug("i2c-core: driver [%s] unregistered\n", driver->driver.name);
-
-	mutex_unlock(&core_lock);
 }
 EXPORT_SYMBOL(i2c_del_driver);
 
@@ -820,86 +876,6 @@ static int i2c_check_addr(struct i2c_adapter *adapter, int addr)
 	return device_for_each_child(&adapter->dev, &addr, __i2c_check_addr);
 }
 
-int i2c_attach_client(struct i2c_client *client)
-{
-	struct i2c_adapter *adapter = client->adapter;
-	int res;
-
-	/* Check for address business */
-	res = i2c_check_addr(adapter, client->addr);
-	if (res)
-		return res;
-
-	client->dev.parent = &client->adapter->dev;
-	client->dev.bus = &i2c_bus_type;
-
-	if (client->driver)
-		client->dev.driver = &client->driver->driver;
-
-	if (client->driver && !is_newstyle_driver(client->driver)) {
-		client->dev.release = i2c_client_release;
-		dev_set_uevent_suppress(&client->dev, 1);
-	} else
-		client->dev.release = i2c_client_dev_release;
-
-	dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adapter),
-		     client->addr);
-	res = device_register(&client->dev);
-	if (res)
-		goto out_err;
-
-	mutex_lock(&adapter->clist_lock);
-	list_add_tail(&client->list, &adapter->clients);
-	mutex_unlock(&adapter->clist_lock);
-
-	dev_dbg(&adapter->dev, "client [%s] registered with bus id %s\n",
-		client->name, dev_name(&client->dev));
-
-	if (adapter->client_register)  {
-		if (adapter->client_register(client)) {
-			dev_dbg(&adapter->dev, "client_register "
-				"failed for client [%s] at 0x%02x\n",
-				client->name, client->addr);
-		}
-	}
-
-	return 0;
-
-out_err:
-	dev_err(&adapter->dev, "Failed to attach i2c client %s at 0x%02x "
-		"(%d)\n", client->name, client->addr, res);
-	return res;
-}
-EXPORT_SYMBOL(i2c_attach_client);
-
-int i2c_detach_client(struct i2c_client *client)
-{
-	struct i2c_adapter *adapter = client->adapter;
-	int res = 0;
-
-	if (adapter->client_unregister)  {
-		res = adapter->client_unregister(client);
-		if (res) {
-			dev_err(&client->dev,
-				"client_unregister [%s] failed, "
-				"client not detached\n", client->name);
-			goto out;
-		}
-	}
-
-	mutex_lock(&adapter->clist_lock);
-	list_del(&client->list);
-	mutex_unlock(&adapter->clist_lock);
-
-	init_completion(&client->released);
-	device_unregister(&client->dev);
-	wait_for_completion(&client->released);
-
- out:
-	return res;
-}
-EXPORT_SYMBOL(i2c_detach_client);
-
 /**
  * i2c_use_client - increments the reference count of the i2c client structure
  * @client: the client being referenced
@@ -1129,144 +1105,7 @@ EXPORT_SYMBOL(i2c_master_recv);
  * Will not work for 10-bit addresses!
  * ----------------------------------------------------
  */
-static int i2c_probe_address(struct i2c_adapter *adapter, int addr, int kind,
-			     int (*found_proc) (struct i2c_adapter *, int, int))
-{
-	int err;
-
-	/* Make sure the address is valid */
-	if (addr < 0x03 || addr > 0x77) {
-		dev_warn(&adapter->dev, "Invalid probe address 0x%02x\n",
-			 addr);
-		return -EINVAL;
-	}
-
-	/* Skip if already in use */
-	if (i2c_check_addr(adapter, addr))
-		return 0;
-
-	/* Make sure there is something at this address, unless forced */
-	if (kind < 0) {
-		if (i2c_smbus_xfer(adapter, addr, 0, 0, 0,
-				   I2C_SMBUS_QUICK, NULL) < 0)
-			return 0;
-
-		/* prevent 24RF08 corruption */
-		if ((addr & ~0x0f) == 0x50)
-			i2c_smbus_xfer(adapter, addr, 0, 0, 0,
-				       I2C_SMBUS_QUICK, NULL);
-	}
-
-	/* Finally call the custom detection function */
-	err = found_proc(adapter, addr, kind);
-	/* -ENODEV can be returned if there is a chip at the given address
-	   but it isn't supported by this chip driver. We catch it here as
-	   this isn't an error. */
-	if (err == -ENODEV)
-		err = 0;
-
-	if (err)
-		dev_warn(&adapter->dev, "Client creation failed at 0x%x (%d)\n",
-			 addr, err);
-	return err;
-}
-
-int i2c_probe(struct i2c_adapter *adapter,
-	      const struct i2c_client_address_data *address_data,
-	      int (*found_proc) (struct i2c_adapter *, int, int))
-{
-	int i, err;
-	int adap_id = i2c_adapter_id(adapter);
-
-	/* Force entries are done first, and are not affected by ignore
-	   entries */
-	if (address_data->forces) {
-		const unsigned short * const *forces = address_data->forces;
-		int kind;
-
-		for (kind = 0; forces[kind]; kind++) {
-			for (i = 0; forces[kind][i] != I2C_CLIENT_END;
-			     i += 2) {
-				if (forces[kind][i] == adap_id
-				 || forces[kind][i] == ANY_I2C_BUS) {
-					dev_dbg(&adapter->dev, "found force "
-						"parameter for adapter %d, "
-						"addr 0x%02x, kind %d\n",
-						adap_id, forces[kind][i + 1],
-						kind);
-					err = i2c_probe_address(adapter,
-						forces[kind][i + 1],
-						kind, found_proc);
-					if (err)
-						return err;
-				}
-			}
-		}
-	}
-
-	/* Stop here if we can't use SMBUS_QUICK */
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) {
-		if (address_data->probe[0] == I2C_CLIENT_END
-		 && address_data->normal_i2c[0] == I2C_CLIENT_END)
-			return 0;
-
-		dev_dbg(&adapter->dev, "SMBus Quick command not supported, "
-			"can't probe for chips\n");
-		return -EOPNOTSUPP;
-	}
-
-	/* Probe entries are done second, and are not affected by ignore
-	   entries either */
-	for (i = 0; address_data->probe[i] != I2C_CLIENT_END; i += 2) {
-		if (address_data->probe[i] == adap_id
-		 || address_data->probe[i] == ANY_I2C_BUS) {
-			dev_dbg(&adapter->dev, "found probe parameter for "
-				"adapter %d, addr 0x%02x\n", adap_id,
-				address_data->probe[i + 1]);
-			err = i2c_probe_address(adapter,
-						address_data->probe[i + 1],
-						-1, found_proc);
-			if (err)
-				return err;
-		}
-	}
-
-	/* Normal entries are done last, unless shadowed by an ignore entry */
-	for (i = 0; address_data->normal_i2c[i] != I2C_CLIENT_END; i += 1) {
-		int j, ignore;
-
-		ignore = 0;
-		for (j = 0; address_data->ignore[j] != I2C_CLIENT_END;
-		     j += 2) {
-			if ((address_data->ignore[j] == adap_id ||
-			     address_data->ignore[j] == ANY_I2C_BUS)
-			 && address_data->ignore[j + 1]
-			    == address_data->normal_i2c[i]) {
-				dev_dbg(&adapter->dev, "found ignore "
-					"parameter for adapter %d, "
-					"addr 0x%02x\n", adap_id,
-					address_data->ignore[j + 1]);
-				ignore = 1;
-				break;
-			}
-		}
-		if (ignore)
-			continue;
-
-		dev_dbg(&adapter->dev, "found normal entry for adapter %d, "
-			"addr 0x%02x\n", adap_id,
-			address_data->normal_i2c[i]);
-		err = i2c_probe_address(adapter, address_data->normal_i2c[i],
-					-1, found_proc);
-		if (err)
-			return err;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(i2c_probe);
 
-/* Separate detection function for new-style drivers */
 static int i2c_detect_address(struct i2c_client *temp_client, int kind,
 			      struct i2c_driver *driver)
 {
diff --git a/drivers/i2c/i2c-core.h b/drivers/i2c/i2c-core.h
index cd5bff87485..9f9c57ff670 100644
--- a/drivers/i2c/i2c-core.h
+++ b/drivers/i2c/i2c-core.h
@@ -16,6 +16,8 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/rwsem.h>
+
 struct i2c_devinfo {
 	struct list_head	list;
 	int			busnum;
@@ -25,7 +27,7 @@ struct i2c_devinfo {
 /* board_lock protects board_list and first_dynamic_bus_num.
  * only i2c core components are allowed to use these symbols.
  */
-extern struct mutex	__i2c_board_lock;
+extern struct rw_semaphore	__i2c_board_lock;
 extern struct list_head	__i2c_board_list;
 extern int		__i2c_first_dynamic_bus_num;
 
diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c
index fc0949a8cfd..dbfeda42b94 100644
--- a/drivers/ide/at91_ide.c
+++ b/drivers/ide/at91_ide.c
@@ -185,8 +185,7 @@ static void at91_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	timing = ide_timing_find_mode(XFER_PIO_0 + pio);
 	BUG_ON(!timing);
 
-	if ((pio > 2 || ata_id_has_iordy(drive->id)) &&
-	    !(ata_id_is_cfa(drive->id) && pio > 4))
+	if (ide_pio_need_iordy(drive, pio))
 		use_iordy = 1;
 
 	apply_timings(chipselect, pio, timing, use_iordy);
diff --git a/drivers/ide/buddha.c b/drivers/ide/buddha.c
index e3c6a591330..ab4f169d083 100644
--- a/drivers/ide/buddha.c
+++ b/drivers/ide/buddha.c
@@ -99,7 +99,7 @@ static const char *buddha_board_name[] = { "Buddha", "Catweasel", "X-Surf" };
      *  Check and acknowledge the interrupt status
      */
 
-static int buddha_ack_intr(ide_hwif_t *hwif)
+static int buddha_test_irq(ide_hwif_t *hwif)
 {
     unsigned char ch;
 
@@ -109,21 +109,16 @@ static int buddha_ack_intr(ide_hwif_t *hwif)
     return 1;
 }
 
-static int xsurf_ack_intr(ide_hwif_t *hwif)
+static void xsurf_clear_irq(ide_drive_t *drive)
 {
-    unsigned char ch;
-
-    ch = z_readb(hwif->io_ports.irq_addr);
-    /* X-Surf needs a 0 written to IRQ register to ensure ISA bit A11 stays at 0 */
-    z_writeb(0, hwif->io_ports.irq_addr);
-    if (!(ch & 0x80))
-	    return 0;
-    return 1;
+    /*
+     * X-Surf needs 0 written to IRQ register to ensure ISA bit A11 stays at 0
+     */
+    z_writeb(0, drive->hwif->io_ports.irq_addr);
 }
 
 static void __init buddha_setup_ports(struct ide_hw *hw, unsigned long base,
-				      unsigned long ctl, unsigned long irq_port,
-				      ide_ack_intr_t *ack_intr)
+				      unsigned long ctl, unsigned long irq_port)
 {
 	int i;
 
@@ -138,10 +133,19 @@ static void __init buddha_setup_ports(struct ide_hw *hw, unsigned long base,
 	hw->io_ports.irq_addr = irq_port;
 
 	hw->irq = IRQ_AMIGA_PORTS;
-	hw->ack_intr = ack_intr;
 }
 
+static const struct ide_port_ops buddha_port_ops = {
+	.test_irq		= buddha_test_irq,
+};
+
+static const struct ide_port_ops xsurf_port_ops = {
+	.clear_irq		= xsurf_clear_irq,
+	.test_irq		= buddha_test_irq,
+};
+
 static const struct ide_port_info buddha_port_info = {
+	.port_ops		= &buddha_port_ops,
 	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
 	.irq_flags		= IRQF_SHARED,
 	.chipset		= ide_generic,
@@ -161,6 +165,7 @@ static int __init buddha_init(void)
 	while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
 		unsigned long board;
 		struct ide_hw hw[MAX_NUM_HWIFS], *hws[MAX_NUM_HWIFS];
+		struct ide_port_info d = buddha_port_info;
 
 		if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) {
 			buddha_num_hwifs = BUDDHA_NUM_HWIFS;
@@ -171,6 +176,7 @@ static int __init buddha_init(void)
 		} else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF) {
 			buddha_num_hwifs = XSURF_NUM_HWIFS;
 			type=BOARD_XSURF;
+			d.port_ops = &xsurf_port_ops;
 		} else 
 			continue;
 		
@@ -203,28 +209,24 @@ fail_base2:
 
 		for (i = 0; i < buddha_num_hwifs; i++) {
 			unsigned long base, ctl, irq_port;
-			ide_ack_intr_t *ack_intr;
 
 			if (type != BOARD_XSURF) {
 				base = buddha_board + buddha_bases[i];
 				ctl = base + BUDDHA_CONTROL;
 				irq_port = buddha_board + buddha_irqports[i];
-				ack_intr = buddha_ack_intr;
 			} else {
 				base = buddha_board + xsurf_bases[i];
 				/* X-Surf has no CS1* (Control/AltStat) */
 				ctl = 0;
 				irq_port = buddha_board + xsurf_irqports[i];
-				ack_intr = xsurf_ack_intr;
 			}
 
-			buddha_setup_ports(&hw[i], base, ctl, irq_port,
-					   ack_intr);
+			buddha_setup_ports(&hw[i], base, ctl, irq_port);
 
 			hws[i] = &hw[i];
 		}
 
-		ide_host_add(&buddha_port_info, hws, i, NULL);
+		ide_host_add(&d, hws, i, NULL);
 	}
 
 	return 0;
diff --git a/drivers/ide/cmd640.c b/drivers/ide/cmd640.c
index 1683ed5c732..1a32d62ed86 100644
--- a/drivers/ide/cmd640.c
+++ b/drivers/ide/cmd640.c
@@ -153,6 +153,7 @@ static int cmd640_vlb;
 #define ARTTIM23	0x57
 #define   ARTTIM23_DIS_RA2	0x04
 #define   ARTTIM23_DIS_RA3	0x08
+#define   ARTTIM23_IDE23INTR	0x10
 #define DRWTIM23	0x58
 #define BRST		0x59
 
@@ -629,12 +630,24 @@ static void cmd640_init_dev(ide_drive_t *drive)
 #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
 }
 
+static int cmd640_test_irq(ide_hwif_t *hwif)
+{
+	struct pci_dev *dev	= to_pci_dev(hwif->dev);
+	int irq_reg		= hwif->channel ? ARTTIM23 : CFR;
+	u8  irq_stat, irq_mask	= hwif->channel ? ARTTIM23_IDE23INTR :
+						  CFR_IDE01INTR;
+
+	pci_read_config_byte(dev, irq_reg, &irq_stat);
+
+	return (irq_stat & irq_mask) ? 1 : 0;
+}
 
 static const struct ide_port_ops cmd640_port_ops = {
 	.init_dev		= cmd640_init_dev,
 #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
 	.set_pio_mode		= cmd640_set_pio_mode,
 #endif
+	.test_irq		= cmd640_test_irq,
 };
 
 static int pci_conf1(void)
diff --git a/drivers/ide/cmd64x.c b/drivers/ide/cmd64x.c
index 80b777e4247..680e5975217 100644
--- a/drivers/ide/cmd64x.c
+++ b/drivers/ide/cmd64x.c
@@ -7,7 +7,7 @@
  * Copyright (C) 1998		David S. Miller (davem@redhat.com)
  *
  * Copyright (C) 1999-2002	Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2007		MontaVista Software, Inc. <source@mvista.com>
+ * Copyright (C) 2007,2009	MontaVista Software, Inc. <source@mvista.com>
  */
 
 #include <linux/module.h>
@@ -118,8 +118,9 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio)
 	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	struct ide_timing *t	= ide_timing_find_mode(XFER_PIO_0 + pio);
+	unsigned long setup_count;
 	unsigned int cycle_time;
-	u8 setup_count, arttim = 0;
+	u8 arttim = 0;
 
 	static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0};
 	static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
@@ -140,10 +141,11 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio)
 	if (hwif->channel) {
 		ide_drive_t *pair = ide_get_pair_dev(drive);
 
-		drive->drive_data = setup_count;
+		ide_set_drivedata(drive, (void *)setup_count);
 
 		if (pair)
-			setup_count = max_t(u8, setup_count, pair->drive_data);
+			setup_count = max_t(u8, setup_count,
+					(unsigned long)ide_get_drivedata(pair));
 	}
 
 	if (setup_count > 5)		/* shouldn't actually happen... */
@@ -226,11 +228,11 @@ static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed)
 		(void) pci_write_config_byte(dev, pciU, regU);
 }
 
-static int cmd648_dma_end(ide_drive_t *drive)
+static void cmd648_clear_irq(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= drive->hwif;
-	unsigned long base	= hwif->dma_base - (hwif->channel * 8);
-	int err			= ide_dma_end(drive);
+	struct pci_dev *dev	= to_pci_dev(hwif->dev);
+	unsigned long base	= pci_resource_start(dev, 4);
 	u8  irq_mask		= hwif->channel ? MRDMODE_INTR_CH1 :
 						  MRDMODE_INTR_CH0;
 	u8  mrdmode		= inb(base + 1);
@@ -238,11 +240,9 @@ static int cmd648_dma_end(ide_drive_t *drive)
 	/* clear the interrupt bit */
 	outb((mrdmode & ~(MRDMODE_INTR_CH0 | MRDMODE_INTR_CH1)) | irq_mask,
 	     base + 1);
-
-	return err;
 }
 
-static int cmd64x_dma_end(ide_drive_t *drive)
+static void cmd64x_clear_irq(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
@@ -250,62 +250,40 @@ static int cmd64x_dma_end(ide_drive_t *drive)
 	u8  irq_mask		= hwif->channel ? ARTTIM23_INTR_CH1 :
 						  CFR_INTR_CH0;
 	u8  irq_stat		= 0;
-	int err			= ide_dma_end(drive);
 
 	(void) pci_read_config_byte(dev, irq_reg, &irq_stat);
 	/* clear the interrupt bit */
 	(void) pci_write_config_byte(dev, irq_reg, irq_stat | irq_mask);
-
-	return err;
 }
 
-static int cmd648_dma_test_irq(ide_drive_t *drive)
+static int cmd648_test_irq(ide_hwif_t *hwif)
 {
-	ide_hwif_t *hwif	= drive->hwif;
-	unsigned long base	= hwif->dma_base - (hwif->channel * 8);
+	struct pci_dev *dev	= to_pci_dev(hwif->dev);
+	unsigned long base	= pci_resource_start(dev, 4);
 	u8 irq_mask		= hwif->channel ? MRDMODE_INTR_CH1 :
 						  MRDMODE_INTR_CH0;
-	u8 dma_stat		= inb(hwif->dma_base + ATA_DMA_STATUS);
 	u8 mrdmode		= inb(base + 1);
 
-#ifdef DEBUG
-	printk("%s: dma_stat: 0x%02x mrdmode: 0x%02x irq_mask: 0x%02x\n",
-	       drive->name, dma_stat, mrdmode, irq_mask);
-#endif
-	if (!(mrdmode & irq_mask))
-		return 0;
-
-	/* return 1 if INTR asserted */
-	if (dma_stat & 4)
-		return 1;
+	pr_debug("%s: mrdmode: 0x%02x irq_mask: 0x%02x\n",
+		 hwif->name, mrdmode, irq_mask);
 
-	return 0;
+	return (mrdmode & irq_mask) ? 1 : 0;
 }
 
-static int cmd64x_dma_test_irq(ide_drive_t *drive)
+static int cmd64x_test_irq(ide_hwif_t *hwif)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	int irq_reg		= hwif->channel ? ARTTIM23 : CFR;
 	u8  irq_mask		= hwif->channel ? ARTTIM23_INTR_CH1 :
 						  CFR_INTR_CH0;
-	u8  dma_stat		= inb(hwif->dma_base + ATA_DMA_STATUS);
 	u8  irq_stat		= 0;
 
 	(void) pci_read_config_byte(dev, irq_reg, &irq_stat);
 
-#ifdef DEBUG
-	printk("%s: dma_stat: 0x%02x irq_stat: 0x%02x irq_mask: 0x%02x\n",
-	       drive->name, dma_stat, irq_stat, irq_mask);
-#endif
-	if (!(irq_stat & irq_mask))
-		return 0;
-
-	/* return 1 if INTR asserted */
-	if (dma_stat & 4)
-		return 1;
+	pr_debug("%s: irq_stat: 0x%02x irq_mask: 0x%02x\n",
+		 hwif->name, irq_stat, irq_mask);
 
-	return 0;
+	return (irq_stat & irq_mask) ? 1 : 0;
 }
 
 /*
@@ -370,18 +348,17 @@ static u8 cmd64x_cable_detect(ide_hwif_t *hwif)
 static const struct ide_port_ops cmd64x_port_ops = {
 	.set_pio_mode		= cmd64x_set_pio_mode,
 	.set_dma_mode		= cmd64x_set_dma_mode,
+	.clear_irq		= cmd64x_clear_irq,
+	.test_irq		= cmd64x_test_irq,
 	.cable_detect		= cmd64x_cable_detect,
 };
 
-static const struct ide_dma_ops cmd64x_dma_ops = {
-	.dma_host_set		= ide_dma_host_set,
-	.dma_setup		= ide_dma_setup,
-	.dma_start		= ide_dma_start,
-	.dma_end		= cmd64x_dma_end,
-	.dma_test_irq		= cmd64x_dma_test_irq,
-	.dma_lost_irq		= ide_dma_lost_irq,
-	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
-	.dma_sff_read_status	= ide_dma_sff_read_status,
+static const struct ide_port_ops cmd648_port_ops = {
+	.set_pio_mode		= cmd64x_set_pio_mode,
+	.set_dma_mode		= cmd64x_set_dma_mode,
+	.clear_irq		= cmd648_clear_irq,
+	.test_irq		= cmd648_test_irq,
+	.cable_detect		= cmd64x_cable_detect,
 };
 
 static const struct ide_dma_ops cmd646_rev1_dma_ops = {
@@ -395,24 +372,12 @@ static const struct ide_dma_ops cmd646_rev1_dma_ops = {
 	.dma_sff_read_status	= ide_dma_sff_read_status,
 };
 
-static const struct ide_dma_ops cmd648_dma_ops = {
-	.dma_host_set		= ide_dma_host_set,
-	.dma_setup		= ide_dma_setup,
-	.dma_start		= ide_dma_start,
-	.dma_end		= cmd648_dma_end,
-	.dma_test_irq		= cmd648_dma_test_irq,
-	.dma_lost_irq		= ide_dma_lost_irq,
-	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
-	.dma_sff_read_status	= ide_dma_sff_read_status,
-};
-
 static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
 	{	/* 0: CMD643 */
 		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_cmd64x,
 		.enablebits	= {{0x00,0x00,0x00}, {0x51,0x08,0x08}},
 		.port_ops	= &cmd64x_port_ops,
-		.dma_ops	= &cmd64x_dma_ops,
 		.host_flags	= IDE_HFLAG_CLEAR_SIMPLEX |
 				  IDE_HFLAG_ABUSE_PREFETCH,
 		.pio_mask	= ATA_PIO5,
@@ -423,10 +388,8 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
 		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_cmd64x,
 		.enablebits	= {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
-		.port_ops	= &cmd64x_port_ops,
-		.dma_ops	= &cmd648_dma_ops,
-		.host_flags	= IDE_HFLAG_SERIALIZE |
-				  IDE_HFLAG_ABUSE_PREFETCH,
+		.port_ops	= &cmd648_port_ops,
+		.host_flags	= IDE_HFLAG_ABUSE_PREFETCH,
 		.pio_mask	= ATA_PIO5,
 		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA2,
@@ -435,8 +398,7 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
 		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_cmd64x,
 		.enablebits	= {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
-		.port_ops	= &cmd64x_port_ops,
-		.dma_ops	= &cmd648_dma_ops,
+		.port_ops	= &cmd648_port_ops,
 		.host_flags	= IDE_HFLAG_ABUSE_PREFETCH,
 		.pio_mask	= ATA_PIO5,
 		.mwdma_mask	= ATA_MWDMA2,
@@ -446,8 +408,7 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
 		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_cmd64x,
 		.enablebits	= {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
-		.port_ops	= &cmd64x_port_ops,
-		.dma_ops	= &cmd648_dma_ops,
+		.port_ops	= &cmd648_port_ops,
 		.host_flags	= IDE_HFLAG_ABUSE_PREFETCH,
 		.pio_mask	= ATA_PIO5,
 		.mwdma_mask	= ATA_MWDMA2,
@@ -484,10 +445,9 @@ static int __devinit cmd64x_init_one(struct pci_dev *dev, const struct pci_devic
 			 */
 			if (dev->revision < 3) {
 				d.enablebits[0].reg = 0;
+				d.port_ops = &cmd64x_port_ops;
 				if (dev->revision == 1)
 					d.dma_ops = &cmd646_rev1_dma_ops;
-				else
-					d.dma_ops = &cmd64x_dma_ops;
 			}
 		}
 	}
diff --git a/drivers/ide/cs5536.c b/drivers/ide/cs5536.c
index 0332a95eefd..9623b852c61 100644
--- a/drivers/ide/cs5536.c
+++ b/drivers/ide/cs5536.c
@@ -146,14 +146,16 @@ static void cs5536_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	struct pci_dev *pdev = to_pci_dev(drive->hwif->dev);
 	ide_drive_t *pair = ide_get_pair_dev(drive);
 	int cshift = (drive->dn & 1) ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT;
+	unsigned long timings = (unsigned long)ide_get_drivedata(drive);
 	u32 cast;
 	u8 cmd_pio = pio;
 
 	if (pair)
 		cmd_pio = min(pio, ide_get_best_pio_mode(pair, 255, 4));
 
-	drive->drive_data &= (IDE_DRV_MASK << 8);
-	drive->drive_data |= drv_timings[pio];
+	timings &= (IDE_DRV_MASK << 8);
+	timings |= drv_timings[pio];
+	ide_set_drivedata(drive, (void *)timings);
 
 	cs5536_program_dtc(drive, drv_timings[pio]);
 
@@ -186,6 +188,7 @@ static void cs5536_set_dma_mode(ide_drive_t *drive, const u8 mode)
 
 	struct pci_dev *pdev = to_pci_dev(drive->hwif->dev);
 	int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT;
+	unsigned long timings = (unsigned long)ide_get_drivedata(drive);
 	u32 etc;
 
 	cs5536_read(pdev, ETC, &etc);
@@ -195,8 +198,9 @@ static void cs5536_set_dma_mode(ide_drive_t *drive, const u8 mode)
 		etc |= udma_timings[mode - XFER_UDMA_0] << dshift;
 	} else { /* MWDMA */
 		etc &= ~(IDE_ETC_UDMA_MASK << dshift);
-		drive->drive_data &= IDE_DRV_MASK;
-		drive->drive_data |= mwdma_timings[mode - XFER_MW_DMA_0] << 8;
+		timings &= IDE_DRV_MASK;
+		timings |= mwdma_timings[mode - XFER_MW_DMA_0] << 8;
+		ide_set_drivedata(drive, (void *)timings);
 	}
 
 	cs5536_write(pdev, ETC, etc);
@@ -204,9 +208,11 @@ static void cs5536_set_dma_mode(ide_drive_t *drive, const u8 mode)
 
 static void cs5536_dma_start(ide_drive_t *drive)
 {
+	unsigned long timings = (unsigned long)ide_get_drivedata(drive);
+
 	if (drive->current_speed < XFER_UDMA_0 &&
-	    (drive->drive_data >> 8) != (drive->drive_data & IDE_DRV_MASK))
-		cs5536_program_dtc(drive, drive->drive_data >> 8);
+	    (timings >> 8) != (timings & IDE_DRV_MASK))
+		cs5536_program_dtc(drive, timings >> 8);
 
 	ide_dma_start(drive);
 }
@@ -214,10 +220,11 @@ static void cs5536_dma_start(ide_drive_t *drive)
 static int cs5536_dma_end(ide_drive_t *drive)
 {
 	int ret = ide_dma_end(drive);
+	unsigned long timings = (unsigned long)ide_get_drivedata(drive);
 
 	if (drive->current_speed < XFER_UDMA_0 &&
-	    (drive->drive_data >> 8) != (drive->drive_data & IDE_DRV_MASK))
-		cs5536_program_dtc(drive, drive->drive_data & IDE_DRV_MASK);
+	    (timings >> 8) != (timings & IDE_DRV_MASK))
+		cs5536_program_dtc(drive, timings & IDE_DRV_MASK);
 
 	return ret;
 }
diff --git a/drivers/ide/falconide.c b/drivers/ide/falconide.c
index 22fa27389c3..a5a07ccb81a 100644
--- a/drivers/ide/falconide.c
+++ b/drivers/ide/falconide.c
@@ -128,7 +128,6 @@ static void __init falconide_setup_ports(struct ide_hw *hw)
 	hw->io_ports.ctl_addr = ATA_HD_BASE + ATA_HD_CONTROL;
 
 	hw->irq = IRQ_MFP_IDE;
-	hw->ack_intr = NULL;
 }
 
     /*
diff --git a/drivers/ide/gayle.c b/drivers/ide/gayle.c
index 4451a6a5dfe..b9e517de6a8 100644
--- a/drivers/ide/gayle.c
+++ b/drivers/ide/gayle.c
@@ -66,7 +66,7 @@ MODULE_PARM_DESC(doubler, "enable support for IDE doublers");
      *  Check and acknowledge the interrupt status
      */
 
-static int gayle_ack_intr_a4000(ide_hwif_t *hwif)
+static int gayle_test_irq(ide_hwif_t *hwif)
 {
     unsigned char ch;
 
@@ -76,21 +76,16 @@ static int gayle_ack_intr_a4000(ide_hwif_t *hwif)
     return 1;
 }
 
-static int gayle_ack_intr_a1200(ide_hwif_t *hwif)
+static void gayle_a1200_clear_irq(ide_drive_t *drive)
 {
-    unsigned char ch;
+    ide_hwif_t *hwif = drive->hwif;
 
-    ch = z_readb(hwif->io_ports.irq_addr);
-    if (!(ch & GAYLE_IRQ_IDE))
-	return 0;
     (void)z_readb(hwif->io_ports.status_addr);
     z_writeb(0x7c, hwif->io_ports.irq_addr);
-    return 1;
 }
 
 static void __init gayle_setup_ports(struct ide_hw *hw, unsigned long base,
-				     unsigned long ctl, unsigned long irq_port,
-				     ide_ack_intr_t *ack_intr)
+				     unsigned long ctl, unsigned long irq_port)
 {
 	int i;
 
@@ -105,9 +100,17 @@ static void __init gayle_setup_ports(struct ide_hw *hw, unsigned long base,
 	hw->io_ports.irq_addr = irq_port;
 
 	hw->irq = IRQ_AMIGA_PORTS;
-	hw->ack_intr = ack_intr;
 }
 
+static const struct ide_port_ops gayle_a4000_port_ops = {
+	.test_irq		= gayle_test_irq,
+};
+
+static const struct ide_port_ops gayle_a1200_port_ops = {
+	.clear_irq		= gayle_a1200_clear_irq,
+	.test_irq		= gayle_test_irq,
+};
+
 static const struct ide_port_info gayle_port_info = {
 	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_SERIALIZE |
 				  IDE_HFLAG_NO_DMA,
@@ -123,9 +126,9 @@ static int __init gayle_init(void)
 {
     unsigned long phys_base, res_start, res_n;
     unsigned long base, ctrlport, irqport;
-    ide_ack_intr_t *ack_intr;
     int a4000, i, rc;
     struct ide_hw hw[GAYLE_NUM_HWIFS], *hws[GAYLE_NUM_HWIFS];
+    struct ide_port_info d = gayle_port_info;
 
     if (!MACH_IS_AMIGA)
 	return -ENODEV;
@@ -148,11 +151,11 @@ found:
 	if (a4000) {
 	    phys_base = GAYLE_BASE_4000;
 	    irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_4000);
-	    ack_intr = gayle_ack_intr_a4000;
+	    d.port_ops = &gayle_a4000_port_ops;
 	} else {
 	    phys_base = GAYLE_BASE_1200;
 	    irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_1200);
-	    ack_intr = gayle_ack_intr_a1200;
+	    d.port_ops = &gayle_a1200_port_ops;
 	}
 
 	res_start = ((unsigned long)phys_base) & ~(GAYLE_NEXT_PORT-1);
@@ -165,12 +168,12 @@ found:
 	base = (unsigned long)ZTWO_VADDR(phys_base + i * GAYLE_NEXT_PORT);
 	ctrlport = GAYLE_HAS_CONTROL_REG ? (base + GAYLE_CONTROL) : 0;
 
-	gayle_setup_ports(&hw[i], base, ctrlport, irqport, ack_intr);
+	gayle_setup_ports(&hw[i], base, ctrlport, irqport);
 
 	hws[i] = &hw[i];
     }
 
-    rc = ide_host_add(&gayle_port_info, hws, i, NULL);
+    rc = ide_host_add(&d, hws, i, NULL);
     if (rc)
 	release_mem_region(res_start, res_n);
 
diff --git a/drivers/ide/ht6560b.c b/drivers/ide/ht6560b.c
index 2fb0f296500..aafed8060e1 100644
--- a/drivers/ide/ht6560b.c
+++ b/drivers/ide/ht6560b.c
@@ -44,7 +44,12 @@
  *    bit3 (0x08): "1" 3 cycle time, "0" 2 cycle time	      (?)
  */
 #define HT_CONFIG_PORT	  0x3e6
-#define HT_CONFIG(drivea) (u8)(((drivea)->drive_data & 0xff00) >> 8)
+
+static inline u8 HT_CONFIG(ide_drive_t *drive)
+{
+	return ((unsigned long)ide_get_drivedata(drive) & 0xff00) >> 8;
+}
+
 /*
  * FIFO + PREFETCH (both a/b-model)
  */
@@ -90,7 +95,11 @@
  * Active Time for each drive. Smaller value gives higher speed.
  * In case of failures you should probably fall back to a higher value.
  */
-#define HT_TIMING(drivea) (u8)((drivea)->drive_data & 0x00ff)
+static inline u8 HT_TIMING(ide_drive_t *drive)
+{
+	return (unsigned long)ide_get_drivedata(drive) & 0x00ff;
+}
+
 #define HT_TIMING_DEFAULT 0xff
 
 /*
@@ -242,23 +251,27 @@ static DEFINE_SPINLOCK(ht6560b_lock);
  */
 static void ht_set_prefetch(ide_drive_t *drive, u8 state)
 {
-	unsigned long flags;
+	unsigned long flags, config;
 	int t = HT_PREFETCH_MODE << 8;
 
 	spin_lock_irqsave(&ht6560b_lock, flags);
 
+	config = (unsigned long)ide_get_drivedata(drive);
+
 	/*
 	 *  Prefetch mode and unmask irq seems to conflict
 	 */
 	if (state) {
-		drive->drive_data |= t;   /* enable prefetch mode */
+		config |= t;   /* enable prefetch mode */
 		drive->dev_flags |= IDE_DFLAG_NO_UNMASK;
 		drive->dev_flags &= ~IDE_DFLAG_UNMASK;
 	} else {
-		drive->drive_data &= ~t;  /* disable prefetch mode */
+		config &= ~t;  /* disable prefetch mode */
 		drive->dev_flags &= ~IDE_DFLAG_NO_UNMASK;
 	}
 
+	ide_set_drivedata(drive, (void *)config);
+
 	spin_unlock_irqrestore(&ht6560b_lock, flags);
 
 #ifdef DEBUG
@@ -268,7 +281,7 @@ static void ht_set_prefetch(ide_drive_t *drive, u8 state)
 
 static void ht6560b_set_pio_mode(ide_drive_t *drive, const u8 pio)
 {
-	unsigned long flags;
+	unsigned long flags, config;
 	u8 timing;
 	
 	switch (pio) {
@@ -281,8 +294,10 @@ static void ht6560b_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	timing = ht_pio2timings(drive, pio);
 
 	spin_lock_irqsave(&ht6560b_lock, flags);
-	drive->drive_data &= 0xff00;
-	drive->drive_data |= timing;
+	config = (unsigned long)ide_get_drivedata(drive);
+	config &= 0xff00;
+	config |= timing;
+	ide_set_drivedata(drive, (void *)config);
 	spin_unlock_irqrestore(&ht6560b_lock, flags);
 
 #ifdef DEBUG
@@ -299,7 +314,7 @@ static void __init ht6560b_init_dev(ide_drive_t *drive)
 	if (hwif->channel)
 		t |= (HT_SECONDARY_IF << 8);
 
-	drive->drive_data = t;
+	ide_set_drivedata(drive, (void *)t);
 }
 
 static int probe_ht6560b;
diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c
index 5af3d0ffaf0..0f67f1abbbd 100644
--- a/drivers/ide/icside.c
+++ b/drivers/ide/icside.c
@@ -187,7 +187,8 @@ static const expansioncard_ops_t icside_ops_arcin_v6 = {
  */
 static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode)
 {
-	int cycle_time, use_dma_info = 0;
+	unsigned long cycle_time;
+	int use_dma_info = 0;
 
 	switch (xfer_mode) {
 	case XFER_MW_DMA_2:
@@ -218,10 +219,11 @@ static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode)
 	if (use_dma_info && drive->id[ATA_ID_EIDE_DMA_TIME] > cycle_time)
 		cycle_time = drive->id[ATA_ID_EIDE_DMA_TIME];
 
-	drive->drive_data = cycle_time;
+	ide_set_drivedata(drive, (void *)cycle_time);
 
 	printk("%s: %s selected (peak %dMB/s)\n", drive->name,
-		ide_xfer_verbose(xfer_mode), 2000 / drive->drive_data);
+		ide_xfer_verbose(xfer_mode),
+		2000 / (unsigned long)ide_get_drivedata(drive));
 }
 
 static const struct ide_port_ops icside_v6_port_ops = {
@@ -277,7 +279,7 @@ static int icside_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
 	/*
 	 * Select the correct timing for this drive.
 	 */
-	set_dma_speed(ec->dma, drive->drive_data);
+	set_dma_speed(ec->dma, (unsigned long)ide_get_drivedata(drive));
 
 	/*
 	 * Tell the DMA engine about the SG table and
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 702ef64a0f1..eb2181a6a11 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -10,6 +10,9 @@
 
 #include <scsi/scsi.h>
 
+#define DRV_NAME "ide-atapi"
+#define PFX DRV_NAME ": "
+
 #ifdef DEBUG
 #define debug_log(fmt, args...) \
 	printk(KERN_INFO "ide: " fmt, ## args)
@@ -74,8 +77,6 @@ EXPORT_SYMBOL_GPL(ide_check_atapi_device);
 void ide_init_pc(struct ide_atapi_pc *pc)
 {
 	memset(pc, 0, sizeof(*pc));
-	pc->buf = pc->pc_buf;
-	pc->buf_size = IDE_PC_BUFFER_SIZE;
 }
 EXPORT_SYMBOL_GPL(ide_init_pc);
 
@@ -84,7 +85,7 @@ EXPORT_SYMBOL_GPL(ide_init_pc);
  * and wait for it to be serviced.
  */
 int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk,
-		      struct ide_atapi_pc *pc)
+		      struct ide_atapi_pc *pc, void *buf, unsigned int bufflen)
 {
 	struct request *rq;
 	int error;
@@ -93,8 +94,8 @@ int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk,
 	rq->cmd_type = REQ_TYPE_SPECIAL;
 	rq->special = (char *)pc;
 
-	if (pc->req_xfer) {
-		error = blk_rq_map_kern(drive->queue, rq, pc->buf, pc->req_xfer,
+	if (buf && bufflen) {
+		error = blk_rq_map_kern(drive->queue, rq, buf, bufflen,
 					GFP_NOIO);
 		if (error)
 			goto put_req;
@@ -117,7 +118,7 @@ int ide_do_test_unit_ready(ide_drive_t *drive, struct gendisk *disk)
 	ide_init_pc(&pc);
 	pc.c[0] = TEST_UNIT_READY;
 
-	return ide_queue_pc_tail(drive, disk, &pc);
+	return ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
 }
 EXPORT_SYMBOL_GPL(ide_do_test_unit_ready);
 
@@ -132,7 +133,7 @@ int ide_do_start_stop(ide_drive_t *drive, struct gendisk *disk, int start)
 	if (drive->media == ide_tape)
 		pc.flags |= PC_FLAG_WAIT_FOR_DSC;
 
-	return ide_queue_pc_tail(drive, disk, &pc);
+	return ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
 }
 EXPORT_SYMBOL_GPL(ide_do_start_stop);
 
@@ -147,7 +148,7 @@ int ide_set_media_lock(ide_drive_t *drive, struct gendisk *disk, int on)
 	pc.c[0] = ALLOW_MEDIUM_REMOVAL;
 	pc.c[4] = on;
 
-	return ide_queue_pc_tail(drive, disk, &pc);
+	return ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
 }
 EXPORT_SYMBOL_GPL(ide_set_media_lock);
 
@@ -172,8 +173,6 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq)
 	unsigned int cmd_len, sense_len;
 	int err;
 
-	debug_log("%s: enter\n", __func__);
-
 	switch (drive->media) {
 	case ide_floppy:
 		cmd_len = 255;
@@ -201,8 +200,8 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq)
 			      GFP_NOIO);
 	if (unlikely(err)) {
 		if (printk_ratelimit())
-			printk(KERN_WARNING "%s: failed to map sense buffer\n",
-			       drive->name);
+			printk(KERN_WARNING PFX "%s: failed to map sense "
+					    "buffer\n", drive->name);
 		return;
 	}
 
@@ -223,7 +222,7 @@ int ide_queue_sense_rq(ide_drive_t *drive, void *special)
 {
 	/* deferred failure from ide_prep_sense() */
 	if (!drive->sense_rq_armed) {
-		printk(KERN_WARNING "%s: failed queue sense request\n",
+		printk(KERN_WARNING PFX "%s: error queuing a sense request\n",
 		       drive->name);
 		return -ENOMEM;
 	}
@@ -255,8 +254,6 @@ void ide_retry_pc(ide_drive_t *drive)
 	/* init pc from sense_rq */
 	ide_init_pc(pc);
 	memcpy(pc->c, sense_rq->cmd, 12);
-	pc->buf = bio_data(sense_rq->bio);	/* pointer to mapped address */
-	pc->req_xfer = blk_rq_bytes(sense_rq);
 
 	if (drive->media == ide_tape)
 		drive->atapi_flags |= IDE_AFLAG_IGNORE_DSC;
@@ -298,7 +295,7 @@ int ide_cd_expiry(ide_drive_t *drive)
 		break;
 	default:
 		if (!(rq->cmd_flags & REQ_QUIET))
-			printk(KERN_INFO "cmd 0x%x timed out\n",
+			printk(KERN_INFO PFX "cmd 0x%x timed out\n",
 					 rq->cmd[0]);
 		wait = 0;
 		break;
@@ -332,6 +329,55 @@ void ide_read_bcount_and_ireason(ide_drive_t *drive, u16 *bcount, u8 *ireason)
 EXPORT_SYMBOL_GPL(ide_read_bcount_and_ireason);
 
 /*
+ * Check the contents of the interrupt reason register and attempt to recover if
+ * there are problems.
+ *
+ * Returns:
+ * - 0 if everything's ok
+ * - 1 if the request has to be terminated.
+ */
+int ide_check_ireason(ide_drive_t *drive, struct request *rq, int len,
+		      int ireason, int rw)
+{
+	ide_hwif_t *hwif = drive->hwif;
+
+	debug_log("ireason: 0x%x, rw: 0x%x\n", ireason, rw);
+
+	if (ireason == (!rw << 1))
+		return 0;
+	else if (ireason == (rw << 1)) {
+		printk(KERN_ERR PFX "%s: %s: wrong transfer direction!\n",
+				drive->name, __func__);
+
+		if (dev_is_idecd(drive))
+			ide_pad_transfer(drive, rw, len);
+	} else if (!rw && ireason == ATAPI_COD) {
+		if (dev_is_idecd(drive)) {
+			/*
+			 * Some drives (ASUS) seem to tell us that status info
+			 * is available.  Just get it and ignore.
+			 */
+			(void)hwif->tp_ops->read_status(hwif);
+			return 0;
+		}
+	} else {
+		if (ireason & ATAPI_COD)
+			printk(KERN_ERR PFX "%s: CoD != 0 in %s\n", drive->name,
+					__func__);
+
+		/* drive wants a command packet, or invalid ireason... */
+		printk(KERN_ERR PFX "%s: %s: bad interrupt reason 0x%02x\n",
+				drive->name, __func__, ireason);
+	}
+
+	if (dev_is_idecd(drive) && rq->cmd_type == REQ_TYPE_ATA_PC)
+		rq->cmd_flags |= REQ_FAILED;
+
+	return 1;
+}
+EXPORT_SYMBOL_GPL(ide_check_ireason);
+
+/*
  * This is the usual interrupt handler which will be called during a packet
  * command.  We will transfer some of the data (as requested by the drive)
  * and will re-point interrupt handler to us.
@@ -365,12 +411,12 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 
 		if (rc || (drive->media == ide_tape && (stat & ATA_ERR))) {
 			if (drive->media == ide_floppy)
-				printk(KERN_ERR "%s: DMA %s error\n",
+				printk(KERN_ERR PFX "%s: DMA %s error\n",
 					drive->name, rq_data_dir(pc->rq)
 						     ? "write" : "read");
 			pc->flags |= PC_FLAG_DMA_ERROR;
 		} else
-			pc->xferred = pc->req_xfer;
+			rq->resid_len = 0;
 		debug_log("%s: DMA finished\n", drive->name);
 	}
 
@@ -379,7 +425,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 		int uptodate, error;
 
 		debug_log("Packet command completed, %d bytes transferred\n",
-			  pc->xferred);
+			  blk_rq_bytes(rq));
 
 		pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
 
@@ -397,8 +443,8 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 				pc->rq->errors++;
 
 			if (rq->cmd[0] == REQUEST_SENSE) {
-				printk(KERN_ERR "%s: I/O error in request sense"
-						" command\n", drive->name);
+				printk(KERN_ERR PFX "%s: I/O error in request "
+						"sense command\n", drive->name);
 				return ide_do_reset(drive);
 			}
 
@@ -446,8 +492,8 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 
 	if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
 		pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
-		printk(KERN_ERR "%s: The device wants to issue more interrupts "
-				"in DMA mode\n", drive->name);
+		printk(KERN_ERR PFX "%s: The device wants to issue more "
+				"interrupts in DMA mode\n", drive->name);
 		ide_dma_off(drive);
 		return ide_do_reset(drive);
 	}
@@ -455,33 +501,22 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 	/* Get the number of bytes to transfer on this interrupt. */
 	ide_read_bcount_and_ireason(drive, &bcount, &ireason);
 
-	if (ireason & ATAPI_COD) {
-		printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__);
+	if (ide_check_ireason(drive, rq, bcount, ireason, write))
 		return ide_do_reset(drive);
-	}
-
-	if (((ireason & ATAPI_IO) == ATAPI_IO) == write) {
-		/* Hopefully, we will never get here */
-		printk(KERN_ERR "%s: We wanted to %s, but the device wants us "
-				"to %s!\n", drive->name,
-				(ireason & ATAPI_IO) ? "Write" : "Read",
-				(ireason & ATAPI_IO) ? "Read" : "Write");
-		return ide_do_reset(drive);
-	}
 
 	done = min_t(unsigned int, bcount, cmd->nleft);
 	ide_pio_bytes(drive, cmd, write, done);
 
 	/* Update transferred byte count */
-	pc->xferred += done;
+	rq->resid_len -= done;
 
 	bcount -= done;
 
 	if (bcount)
 		ide_pad_transfer(drive, write, bcount);
 
-	debug_log("[cmd %x] transferred %d bytes, padded %d bytes\n",
-		  rq->cmd[0], done, bcount);
+	debug_log("[cmd %x] transferred %d bytes, padded %d bytes, resid: %u\n",
+		  rq->cmd[0], done, bcount, rq->resid_len);
 
 	/* And set the interrupt handler again */
 	ide_set_handler(drive, ide_pc_intr, timeout);
@@ -515,13 +550,13 @@ static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason)
 
 	while (retries-- && ((ireason & ATAPI_COD) == 0 ||
 		(ireason & ATAPI_IO))) {
-		printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing "
+		printk(KERN_ERR PFX "%s: (IO,CoD != (0,1) while issuing "
 				"a packet command, retrying\n", drive->name);
 		udelay(100);
 		ireason = ide_read_ireason(drive);
 		if (retries == 0) {
-			printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing "
-					"a packet command, ignoring\n",
+			printk(KERN_ERR PFX "%s: (IO,CoD != (0,1) while issuing"
+					" a packet command, ignoring\n",
 					drive->name);
 			ireason |= ATAPI_COD;
 			ireason &= ~ATAPI_IO;
@@ -552,7 +587,7 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
 	u8 ireason;
 
 	if (ide_wait_stat(&startstop, drive, ATA_DRQ, ATA_BUSY, WAIT_READY)) {
-		printk(KERN_ERR "%s: Strange, packet command initiated yet "
+		printk(KERN_ERR PFX "%s: Strange, packet command initiated yet "
 				"DRQ isn't asserted\n", drive->name);
 		return startstop;
 	}
@@ -594,8 +629,8 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
 			ireason = ide_wait_ireason(drive, ireason);
 
 		if ((ireason & ATAPI_COD) == 0 || (ireason & ATAPI_IO)) {
-			printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing "
-					"a packet command\n", drive->name);
+			printk(KERN_ERR PFX "%s: (IO,CoD) != (0,1) while "
+				"issuing a packet command\n", drive->name);
 
 			return ide_do_reset(drive);
 		}
@@ -633,7 +668,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_cmd *cmd)
 	ide_hwif_t *hwif = drive->hwif;
 	ide_expiry_t *expiry = NULL;
 	struct request *rq = hwif->rq;
-	unsigned int timeout;
+	unsigned int timeout, bytes;
 	u16 bcount;
 	u8 valid_tf;
 	u8 drq_int = !!(drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT);
@@ -649,13 +684,14 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_cmd *cmd)
 	} else {
 		pc = drive->pc;
 
-		/* We haven't transferred any data yet */
-		pc->xferred = 0;
-
 		valid_tf = IDE_VALID_DEVICE;
-		bcount = ((drive->media == ide_tape) ?
-				pc->req_xfer :
-				min(pc->req_xfer, 63 * 1024));
+		bytes = blk_rq_bytes(rq);
+		bcount = ((drive->media == ide_tape) ? bytes
+						     : min_t(unsigned int,
+							     bytes, 63 * 1024));
+
+		/* We haven't transferred any data yet */
+		rq->resid_len = bcount;
 
 		if (pc->flags & PC_FLAG_DMA_ERROR) {
 			pc->flags &= ~PC_FLAG_DMA_ERROR;
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 424140c6c40..4a19686fcfe 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -92,16 +92,16 @@ static void cdrom_saw_media_change(ide_drive_t *drive)
 	drive->atapi_flags &= ~IDE_AFLAG_TOC_VALID;
 }
 
-static int cdrom_log_sense(ide_drive_t *drive, struct request *rq,
-			   struct request_sense *sense)
+static int cdrom_log_sense(ide_drive_t *drive, struct request *rq)
 {
+	struct request_sense *sense = &drive->sense_data;
 	int log = 0;
 
-	ide_debug_log(IDE_DBG_SENSE, "sense_key: 0x%x", sense->sense_key);
-
 	if (!sense || !rq || (rq->cmd_flags & REQ_QUIET))
 		return 0;
 
+	ide_debug_log(IDE_DBG_SENSE, "sense_key: 0x%x", sense->sense_key);
+
 	switch (sense->sense_key) {
 	case NO_SENSE:
 	case RECOVERED_ERROR:
@@ -140,12 +140,12 @@ static int cdrom_log_sense(ide_drive_t *drive, struct request *rq,
 }
 
 static void cdrom_analyze_sense_data(ide_drive_t *drive,
-			      struct request *failed_command,
-			      struct request_sense *sense)
+				     struct request *failed_command)
 {
+	struct request_sense *sense = &drive->sense_data;
+	struct cdrom_info *info = drive->driver_data;
 	unsigned long sector;
 	unsigned long bio_sectors;
-	struct cdrom_info *info = drive->driver_data;
 
 	ide_debug_log(IDE_DBG_SENSE, "error_code: 0x%x, sense_key: 0x%x",
 				     sense->error_code, sense->sense_key);
@@ -154,7 +154,7 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive,
 		ide_debug_log(IDE_DBG_SENSE, "failed cmd: 0x%x",
 					     failed_command->cmd[0]);
 
-	if (!cdrom_log_sense(drive, failed_command, sense))
+	if (!cdrom_log_sense(drive, failed_command))
 		return;
 
 	/*
@@ -225,15 +225,14 @@ static void ide_cd_complete_failed_rq(ide_drive_t *drive, struct request *rq)
 			 * sense pointer set.
 			 */
 			memcpy(failed->sense, sense, 18);
-			sense = failed->sense;
 			failed->sense_len = rq->sense_len;
 		}
-		cdrom_analyze_sense_data(drive, failed, sense);
+		cdrom_analyze_sense_data(drive, failed);
 
 		if (ide_end_rq(drive, failed, -EIO, blk_rq_bytes(failed)))
 			BUG();
 	} else
-		cdrom_analyze_sense_data(drive, NULL, sense);
+		cdrom_analyze_sense_data(drive, NULL);
 }
 
 
@@ -410,50 +409,6 @@ end_request:
 		return 2;
 }
 
-/*
- * Check the contents of the interrupt reason register from the cdrom
- * and attempt to recover if there are problems.  Returns  0 if everything's
- * ok; nonzero if the request has been terminated.
- */
-static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq,
-				int len, int ireason, int rw)
-{
-	ide_hwif_t *hwif = drive->hwif;
-
-	ide_debug_log(IDE_DBG_FUNC, "ireason: 0x%x, rw: 0x%x", ireason, rw);
-
-	/*
-	 * ireason == 0: the drive wants to receive data from us
-	 * ireason == 2: the drive is expecting to transfer data to us
-	 */
-	if (ireason == (!rw << 1))
-		return 0;
-	else if (ireason == (rw << 1)) {
-
-		/* whoops... */
-		printk(KERN_ERR PFX "%s: %s: wrong transfer direction!\n",
-				drive->name, __func__);
-
-		ide_pad_transfer(drive, rw, len);
-	} else  if (rw == 0 && ireason == 1) {
-		/*
-		 * Some drives (ASUS) seem to tell us that status info is
-		 * available.  Just get it and ignore.
-		 */
-		(void)hwif->tp_ops->read_status(hwif);
-		return 0;
-	} else {
-		/* drive wants a command packet, or invalid ireason... */
-		printk(KERN_ERR PFX "%s: %s: bad interrupt reason 0x%02x\n",
-				drive->name, __func__, ireason);
-	}
-
-	if (rq->cmd_type == REQ_TYPE_ATA_PC)
-		rq->cmd_flags |= REQ_FAILED;
-
-	return -1;
-}
-
 static void ide_cd_request_sense_fixup(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	struct request *rq = cmd->rq;
@@ -645,8 +600,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
 		goto out_end;
 	}
 
-	/* check which way to transfer data */
-	rc = ide_cd_check_ireason(drive, rq, len, ireason, write);
+	rc = ide_check_ireason(drive, rq, len, ireason, write);
 	if (rc)
 		goto out_end;
 
@@ -713,7 +667,7 @@ out_end:
 				rq->errors = -EIO;
 		}
 
-		if (uptodate == 0)
+		if (uptodate == 0 && rq->bio)
 			ide_cd_error_cmd(drive, cmd);
 
 		/* make sure it's fully ended */
@@ -831,12 +785,8 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
 		/* right now this can only be a reset... */
 		uptodate = 1;
 		goto out_end;
-	} else {
-		blk_dump_rq_flags(rq, DRV_NAME " bad flags");
-		if (rq->errors == 0)
-			rq->errors = -EIO;
-		goto out_end;
-	}
+	} else
+		BUG();
 
 	/* prepare sense request for this command */
 	ide_prep_sense(drive, rq);
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 6a1de216970..695181120cd 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -184,14 +184,7 @@ static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
 	ide_hwif_t *hwif = drive->hwif;
 
 	BUG_ON(drive->dev_flags & IDE_DFLAG_BLOCKED);
-
-	if (!blk_fs_request(rq)) {
-		blk_dump_rq_flags(rq, "ide_do_rw_disk - bad command");
-		if (rq->errors == 0)
-			rq->errors = -EIO;
-		ide_complete_rq(drive, -EIO, ide_rq_bytes(rq));
-		return ide_stopped;
-	}
+	BUG_ON(!blk_fs_request(rq));
 
 	ledtrig_ide_activity();
 
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 650981758f1..8b3f204f7d7 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -77,7 +77,8 @@ static int ide_floppy_callback(ide_drive_t *drive, int dsc)
 	    (rq && blk_pc_request(rq)))
 		uptodate = 1; /* FIXME */
 	else if (pc->c[0] == GPCMD_REQUEST_SENSE) {
-		u8 *buf = pc->buf;
+
+		u8 *buf = bio_data(rq->bio);
 
 		if (!pc->error) {
 			floppy->sense_key = buf[2] & 0x0F;
@@ -209,8 +210,7 @@ static void idefloppy_create_rw_cmd(ide_drive_t *drive,
 	pc->rq = rq;
 	if (rq->cmd_flags & REQ_RW)
 		pc->flags |= PC_FLAG_WRITING;
-	pc->buf = NULL;
-	pc->req_xfer = pc->buf_size = blocks * floppy->block_size;
+
 	pc->flags |= PC_FLAG_DMA_OK;
 }
 
@@ -225,9 +225,6 @@ static void idefloppy_blockpc_cmd(struct ide_disk_obj *floppy,
 		if (rq_data_dir(rq) == WRITE)
 			pc->flags |= PC_FLAG_WRITING;
 	}
-	/* pio will be performed by ide_pio_bytes() which handles sg fine */
-	pc->buf = NULL;
-	pc->req_xfer = pc->buf_size = blk_rq_bytes(rq);
 }
 
 static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
@@ -272,10 +269,8 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
 	} else if (blk_pc_request(rq)) {
 		pc = &floppy->queued_pc;
 		idefloppy_blockpc_cmd(floppy, pc, rq);
-	} else {
-		blk_dump_rq_flags(rq, PFX "unsupported command in queue");
-		goto out_end;
-	}
+	} else
+		BUG();
 
 	ide_prep_sense(drive, rq);
 
@@ -286,8 +281,8 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
 
 	cmd.rq = rq;
 
-	if (blk_fs_request(rq) || pc->req_xfer) {
-		ide_init_sg_cmd(&cmd, pc->req_xfer);
+	if (blk_fs_request(rq) || blk_rq_bytes(rq)) {
+		ide_init_sg_cmd(&cmd, blk_rq_bytes(rq));
 		ide_map_sg(drive, &cmd);
 	}
 
@@ -311,33 +306,33 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive,
 {
 	struct ide_disk_obj *floppy = drive->driver_data;
 	struct gendisk *disk = floppy->disk;
-	u8 *page;
+	u8 *page, buf[40];
 	int capacity, lba_capacity;
 	u16 transfer_rate, sector_size, cyls, rpm;
 	u8 heads, sectors;
 
 	ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE);
 
-	if (ide_queue_pc_tail(drive, disk, pc)) {
+	if (ide_queue_pc_tail(drive, disk, pc, buf, pc->req_xfer)) {
 		printk(KERN_ERR PFX "Can't get flexible disk page params\n");
 		return 1;
 	}
 
-	if (pc->buf[3] & 0x80)
+	if (buf[3] & 0x80)
 		drive->dev_flags |= IDE_DFLAG_WP;
 	else
 		drive->dev_flags &= ~IDE_DFLAG_WP;
 
 	set_disk_ro(disk, !!(drive->dev_flags & IDE_DFLAG_WP));
 
-	page = &pc->buf[8];
+	page = &buf[8];
 
-	transfer_rate = be16_to_cpup((__be16 *)&pc->buf[8 + 2]);
-	sector_size   = be16_to_cpup((__be16 *)&pc->buf[8 + 6]);
-	cyls          = be16_to_cpup((__be16 *)&pc->buf[8 + 8]);
-	rpm           = be16_to_cpup((__be16 *)&pc->buf[8 + 28]);
-	heads         = pc->buf[8 + 4];
-	sectors       = pc->buf[8 + 5];
+	transfer_rate = be16_to_cpup((__be16 *)&buf[8 + 2]);
+	sector_size   = be16_to_cpup((__be16 *)&buf[8 + 6]);
+	cyls          = be16_to_cpup((__be16 *)&buf[8 + 8]);
+	rpm           = be16_to_cpup((__be16 *)&buf[8 + 28]);
+	heads         = buf[8 + 4];
+	sectors       = buf[8 + 5];
 
 	capacity = cyls * heads * sectors * sector_size;
 
@@ -387,22 +382,19 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
 	drive->capacity64 = 0;
 
 	ide_floppy_create_read_capacity_cmd(&pc);
-	pc.buf = &pc_buf[0];
-	pc.buf_size = sizeof(pc_buf);
-
-	if (ide_queue_pc_tail(drive, disk, &pc)) {
+	if (ide_queue_pc_tail(drive, disk, &pc, pc_buf, pc.req_xfer)) {
 		printk(KERN_ERR PFX "Can't get floppy parameters\n");
 		return 1;
 	}
-	header_len = pc.buf[3];
-	cap_desc = &pc.buf[4];
+	header_len = pc_buf[3];
+	cap_desc = &pc_buf[4];
 	desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
 
 	for (i = 0; i < desc_cnt; i++) {
 		unsigned int desc_start = 4 + i*8;
 
-		blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]);
-		length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]);
+		blocks = be32_to_cpup((__be32 *)&pc_buf[desc_start]);
+		length = be16_to_cpup((__be16 *)&pc_buf[desc_start + 6]);
 
 		ide_debug_log(IDE_DBG_PROBE, "Descriptor %d: %dkB, %d blocks, "
 					     "%d sector size",
@@ -415,7 +407,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
 		 * the code below is valid only for the 1st descriptor, ie i=0
 		 */
 
-		switch (pc.buf[desc_start + 4] & 0x03) {
+		switch (pc_buf[desc_start + 4] & 0x03) {
 		/* Clik! drive returns this instead of CAPACITY_CURRENT */
 		case CAPACITY_UNFORMATTED:
 			if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE))
@@ -464,7 +456,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
 			break;
 		}
 		ide_debug_log(IDE_DBG_PROBE, "Descriptor 0 Code: %d",
-					     pc.buf[desc_start + 4] & 0x03);
+					     pc_buf[desc_start + 4] & 0x03);
 	}
 
 	/* Clik! disk does not support get_flexible_disk_page */
diff --git a/drivers/ide/ide-floppy_ioctl.c b/drivers/ide/ide-floppy_ioctl.c
index cd8a42027ed..9c2288234de 100644
--- a/drivers/ide/ide-floppy_ioctl.c
+++ b/drivers/ide/ide-floppy_ioctl.c
@@ -47,15 +47,13 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive,
 		return -EINVAL;
 
 	ide_floppy_create_read_capacity_cmd(pc);
-	pc->buf = &pc_buf[0];
-	pc->buf_size = sizeof(pc_buf);
 
-	if (ide_queue_pc_tail(drive, floppy->disk, pc)) {
+	if (ide_queue_pc_tail(drive, floppy->disk, pc, pc_buf, pc->req_xfer)) {
 		printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
 		return -EIO;
 	}
 
-	header_len = pc->buf[3];
+	header_len = pc_buf[3];
 	desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
 
 	u_index = 0;
@@ -72,8 +70,8 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive,
 		if (u_index >= u_array_size)
 			break;	/* User-supplied buffer too small */
 
-		blocks = be32_to_cpup((__be32 *)&pc->buf[desc_start]);
-		length = be16_to_cpup((__be16 *)&pc->buf[desc_start + 6]);
+		blocks = be32_to_cpup((__be32 *)&pc_buf[desc_start]);
+		length = be16_to_cpup((__be16 *)&pc_buf[desc_start + 6]);
 
 		if (put_user(blocks, argp))
 			return -EFAULT;
@@ -94,40 +92,42 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive,
 	return 0;
 }
 
-static void ide_floppy_create_format_unit_cmd(struct ide_atapi_pc *pc, int b,
-		int l, int flags)
+static void ide_floppy_create_format_unit_cmd(struct ide_atapi_pc *pc,
+					      u8 *buf, int b, int l,
+					      int flags)
 {
 	ide_init_pc(pc);
 	pc->c[0] = GPCMD_FORMAT_UNIT;
 	pc->c[1] = 0x17;
 
-	memset(pc->buf, 0, 12);
-	pc->buf[1] = 0xA2;
+	memset(buf, 0, 12);
+	buf[1] = 0xA2;
 	/* Default format list header, u8 1: FOV/DCRT/IMM bits set */
 
 	if (flags & 1)				/* Verify bit on... */
-		pc->buf[1] ^= 0x20;		/* ... turn off DCRT bit */
-	pc->buf[3] = 8;
+		buf[1] ^= 0x20;			/* ... turn off DCRT bit */
+	buf[3] = 8;
 
-	put_unaligned(cpu_to_be32(b), (unsigned int *)(&pc->buf[4]));
-	put_unaligned(cpu_to_be32(l), (unsigned int *)(&pc->buf[8]));
-	pc->buf_size = 12;
+	put_unaligned(cpu_to_be32(b), (unsigned int *)(&buf[4]));
+	put_unaligned(cpu_to_be32(l), (unsigned int *)(&buf[8]));
+	pc->req_xfer = 12;
 	pc->flags |= PC_FLAG_WRITING;
 }
 
 static int ide_floppy_get_sfrp_bit(ide_drive_t *drive, struct ide_atapi_pc *pc)
 {
 	struct ide_disk_obj *floppy = drive->driver_data;
+	u8 buf[20];
 
 	drive->atapi_flags &= ~IDE_AFLAG_SRFP;
 
 	ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_CAPABILITIES_PAGE);
 	pc->flags |= PC_FLAG_SUPPRESS_ERROR;
 
-	if (ide_queue_pc_tail(drive, floppy->disk, pc))
+	if (ide_queue_pc_tail(drive, floppy->disk, pc, buf, pc->req_xfer))
 		return 1;
 
-	if (pc->buf[8 + 2] & 0x40)
+	if (buf[8 + 2] & 0x40)
 		drive->atapi_flags |= IDE_AFLAG_SRFP;
 
 	return 0;
@@ -137,6 +137,7 @@ static int ide_floppy_format_unit(ide_drive_t *drive, struct ide_atapi_pc *pc,
 				  int __user *arg)
 {
 	struct ide_disk_obj *floppy = drive->driver_data;
+	u8 buf[12];
 	int blocks, length, flags, err = 0;
 
 	if (floppy->openers > 1) {
@@ -170,9 +171,9 @@ static int ide_floppy_format_unit(ide_drive_t *drive, struct ide_atapi_pc *pc,
 	}
 
 	ide_floppy_get_sfrp_bit(drive, pc);
-	ide_floppy_create_format_unit_cmd(pc, blocks, length, flags);
+	ide_floppy_create_format_unit_cmd(pc, buf, blocks, length, flags);
 
-	if (ide_queue_pc_tail(drive, floppy->disk, pc))
+	if (ide_queue_pc_tail(drive, floppy->disk, pc, buf, pc->req_xfer))
 		err = -EIO;
 
 out:
@@ -196,11 +197,13 @@ static int ide_floppy_get_format_progress(ide_drive_t *drive,
 					  int __user *arg)
 {
 	struct ide_disk_obj *floppy = drive->driver_data;
+	u8 sense_buf[18];
 	int progress_indication = 0x10000;
 
 	if (drive->atapi_flags & IDE_AFLAG_SRFP) {
 		ide_create_request_sense_cmd(drive, pc);
-		if (ide_queue_pc_tail(drive, floppy->disk, pc))
+		if (ide_queue_pc_tail(drive, floppy->disk, pc, sense_buf,
+				      pc->req_xfer))
 			return -EIO;
 
 		if (floppy->sense_key == 2 &&
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 272cc38f6db..1059f809b80 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -683,8 +683,9 @@ void ide_timer_expiry (unsigned long data)
 		} else if (drive_is_ready(drive)) {
 			if (drive->waiting_for_dma)
 				hwif->dma_ops->dma_lost_irq(drive);
-			if (hwif->ack_intr)
-				hwif->ack_intr(hwif);
+			if (hwif->port_ops && hwif->port_ops->clear_irq)
+				hwif->port_ops->clear_irq(drive);
+
 			printk(KERN_WARNING "%s: lost interrupt\n",
 				drive->name);
 			startstop = handler(drive);
@@ -803,7 +804,8 @@ irqreturn_t ide_intr (int irq, void *dev_id)
 
 	spin_lock_irqsave(&hwif->lock, flags);
 
-	if (hwif->ack_intr && hwif->ack_intr(hwif) == 0)
+	if (hwif->port_ops && hwif->port_ops->test_irq &&
+	    hwif->port_ops->test_irq(hwif) == 0)
 		goto out;
 
 	handler = hwif->handler;
diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c
index 5991b23793f..82f252c3ee6 100644
--- a/drivers/ide/ide-ioctls.c
+++ b/drivers/ide/ide-ioctls.c
@@ -118,7 +118,6 @@ static int ide_cmd_ioctl(ide_drive_t *drive, unsigned long arg)
 	u8 args[4], xfer_rate = 0;
 	struct ide_cmd cmd;
 	struct ide_taskfile *tf = &cmd.tf;
-	u16 *id = drive->id;
 
 	if (NULL == (void *) arg) {
 		struct request *rq;
@@ -161,14 +160,10 @@ static int ide_cmd_ioctl(ide_drive_t *drive, unsigned long arg)
 
 	if (tf->command == ATA_CMD_SET_FEATURES &&
 	    tf->feature == SETFEATURES_XFER &&
-	    tf->nsect >= XFER_SW_DMA_0 &&
-	    (id[ATA_ID_UDMA_MODES] ||
-	     id[ATA_ID_MWDMA_MODES] ||
-	     id[ATA_ID_SWDMA_MODES])) {
-		xfer_rate = args[1];
-		if (tf->nsect > XFER_UDMA_2 && !eighty_ninty_three(drive)) {
-			printk(KERN_WARNING "%s: UDMA speeds >UDMA33 cannot "
-					    "be set\n", drive->name);
+	    tf->nsect >= XFER_SW_DMA_0) {
+		xfer_rate = ide_find_dma_mode(drive, XFER_UDMA_6);
+		if (xfer_rate != tf->nsect) {
+			err = -EINVAL;
 			goto abort;
 		}
 	}
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 79e0af3fd15..51af4eea0d3 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1170,7 +1170,6 @@ static void ide_init_port_hw(ide_hwif_t *hwif, struct ide_hw *hw)
 	hwif->irq = hw->irq;
 	hwif->dev = hw->dev;
 	hwif->gendev.parent = hw->parent ? hw->parent : hw->dev;
-	hwif->ack_intr = hw->ack_intr;
 	hwif->config_data = hw->config;
 }
 
@@ -1378,6 +1377,9 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
 
 		ide_init_port(hwif, i & 1, d);
 		ide_port_cable_detect(hwif);
+
+		hwif->port_flags |= IDE_PFLAG_PROBING;
+
 		ide_port_init_devices(hwif);
 	}
 
@@ -1388,6 +1390,8 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
 		if (ide_probe_port(hwif) == 0)
 			hwif->present = 1;
 
+		hwif->port_flags &= ~IDE_PFLAG_PROBING;
+
 		if ((hwif->host_flags & IDE_HFLAG_4DRIVES) == 0 ||
 		    hwif->mate == NULL || hwif->mate->present == 0) {
 			if (ide_register_port(hwif)) {
@@ -1569,11 +1573,20 @@ EXPORT_SYMBOL_GPL(ide_host_remove);
 
 void ide_port_scan(ide_hwif_t *hwif)
 {
+	int rc;
+
 	ide_port_apply_params(hwif);
 	ide_port_cable_detect(hwif);
+
+	hwif->port_flags |= IDE_PFLAG_PROBING;
+
 	ide_port_init_devices(hwif);
 
-	if (ide_probe_port(hwif) < 0)
+	rc = ide_probe_port(hwif);
+
+	hwif->port_flags &= ~IDE_PFLAG_PROBING;
+
+	if (rc < 0)
 		return;
 
 	hwif->present = 1;
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 4b447a8a49d..013dc595fab 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -279,10 +279,12 @@ static void ide_tape_put(struct ide_tape_obj *tape)
  * called on each failed packet command retry to analyze the request sense. We
  * currently do not utilize this information.
  */
-static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
+static void idetape_analyze_error(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	struct ide_atapi_pc *pc = drive->failed_pc;
+	struct request *rq = drive->hwif->rq;
+	u8 *sense = bio_data(rq->bio);
 
 	tape->sense_key = sense[2] & 0xF;
 	tape->asc       = sense[12];
@@ -291,11 +293,9 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
 	debug_log(DBG_ERR, "pc = %x, sense key = %x, asc = %x, ascq = %x\n",
 		 pc->c[0], tape->sense_key, tape->asc, tape->ascq);
 
-	/* Correct pc->xferred by asking the tape.	 */
+	/* correct remaining bytes to transfer */
 	if (pc->flags & PC_FLAG_DMA_ERROR)
-		pc->xferred = pc->req_xfer -
-			tape->blk_size *
-			get_unaligned_be32(&sense[3]);
+		rq->resid_len = tape->blk_size * get_unaligned_be32(&sense[3]);
 
 	/*
 	 * If error was the result of a zero-length read or write command,
@@ -329,7 +329,7 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
 			pc->flags |= PC_FLAG_ABORT;
 		}
 		if (!(pc->flags & PC_FLAG_ABORT) &&
-		    pc->xferred)
+		    (blk_rq_bytes(rq) - rq->resid_len))
 			pc->retries = IDETAPE_MAX_PC_RETRIES + 1;
 	}
 }
@@ -354,12 +354,13 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc)
 
 	if (pc->c[0] == REQUEST_SENSE) {
 		if (uptodate)
-			idetape_analyze_error(drive, pc->buf);
+			idetape_analyze_error(drive);
 		else
 			printk(KERN_ERR "ide-tape: Error in REQUEST SENSE "
 					"itself - Aborting request!\n");
 	} else if (pc->c[0] == READ_6 || pc->c[0] == WRITE_6) {
-		int blocks = pc->xferred / tape->blk_size;
+		unsigned int blocks =
+			(blk_rq_bytes(rq) - rq->resid_len) / tape->blk_size;
 
 		tape->avg_size += blocks * tape->blk_size;
 
@@ -371,38 +372,12 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc)
 		}
 
 		tape->first_frame += blocks;
-		rq->resid_len -= blocks * tape->blk_size;
 
 		if (pc->error) {
 			uptodate = 0;
 			err = pc->error;
 		}
-	} else if (pc->c[0] == READ_POSITION && uptodate) {
-		u8 *readpos = pc->buf;
-
-		debug_log(DBG_SENSE, "BOP - %s\n",
-				(readpos[0] & 0x80) ? "Yes" : "No");
-		debug_log(DBG_SENSE, "EOP - %s\n",
-				(readpos[0] & 0x40) ? "Yes" : "No");
-
-		if (readpos[0] & 0x4) {
-			printk(KERN_INFO "ide-tape: Block location is unknown"
-					 "to the tape\n");
-			clear_bit(ilog2(IDE_AFLAG_ADDRESS_VALID),
-				  &drive->atapi_flags);
-			uptodate = 0;
-			err = IDE_DRV_ERROR_GENERAL;
-		} else {
-			debug_log(DBG_SENSE, "Block Location - %u\n",
-					be32_to_cpup((__be32 *)&readpos[4]));
-
-			tape->partition = readpos[1];
-			tape->first_frame = be32_to_cpup((__be32 *)&readpos[4]);
-			set_bit(ilog2(IDE_AFLAG_ADDRESS_VALID),
-				&drive->atapi_flags);
-		}
 	}
-
 	rq->errors = err;
 
 	return uptodate;
@@ -477,6 +452,7 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive,
 					 struct ide_atapi_pc *pc)
 {
 	idetape_tape_t *tape = drive->driver_data;
+	struct request *rq = drive->hwif->rq;
 
 	if (drive->failed_pc == NULL && pc->c[0] != REQUEST_SENSE)
 		drive->failed_pc = pc;
@@ -486,7 +462,6 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive,
 
 	if (pc->retries > IDETAPE_MAX_PC_RETRIES ||
 		(pc->flags & PC_FLAG_ABORT)) {
-		unsigned int done = blk_rq_bytes(drive->hwif->rq);
 
 		/*
 		 * We will "abort" retrying a packet command in case legitimate
@@ -510,7 +485,7 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive,
 
 		drive->failed_pc = NULL;
 		drive->pc_callback(drive, 0);
-		ide_complete_rq(drive, -EIO, done);
+		ide_complete_rq(drive, -EIO, blk_rq_bytes(rq));
 		return ide_stopped;
 	}
 	debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]);
@@ -579,15 +554,13 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape,
 				   struct ide_atapi_pc *pc, struct request *rq,
 				   u8 opcode)
 {
-	unsigned int length = blk_rq_sectors(rq);
+	unsigned int length = blk_rq_sectors(rq) / (tape->blk_size >> 9);
 
 	ide_init_pc(pc);
 	put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
 	pc->c[1] = 1;
-	pc->buf = NULL;
-	pc->buf_size = length * tape->blk_size;
-	pc->req_xfer = pc->buf_size;
-	if (pc->req_xfer == tape->buffer_size)
+
+	if (blk_rq_bytes(rq) == tape->buffer_size)
 		pc->flags |= PC_FLAG_DMA_OK;
 
 	if (opcode == READ_6)
@@ -613,15 +586,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 	debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %u\n"
 		  (unsigned long long)blk_rq_pos(rq), blk_rq_sectors(rq));
 
-	if (!(blk_special_request(rq) || blk_sense_request(rq))) {
-		/* We do not support buffer cache originated requests. */
-		printk(KERN_NOTICE "ide-tape: %s: Unsupported request in "
-			"request queue (%d)\n", drive->name, rq->cmd_type);
-		if (blk_fs_request(rq) == 0 && rq->errors == 0)
-			rq->errors = -EIO;
-		ide_complete_rq(drive, -EIO, ide_rq_bytes(rq));
-		return ide_stopped;
-	}
+	BUG_ON(!(blk_special_request(rq) || blk_sense_request(rq)));
 
 	/* Retry a failed packet command */
 	if (drive->failed_pc && drive->pc->c[0] == REQUEST_SENSE) {
@@ -713,7 +678,7 @@ out:
 
 	cmd.rq = rq;
 
-	ide_init_sg_cmd(&cmd, pc->req_xfer);
+	ide_init_sg_cmd(&cmd, blk_rq_bytes(rq));
 	ide_map_sg(drive, &cmd);
 
 	return ide_tape_issue_pc(drive, &cmd, pc);
@@ -767,33 +732,53 @@ static int idetape_flush_tape_buffers(ide_drive_t *drive)
 	int rc;
 
 	idetape_create_write_filemark_cmd(drive, &pc, 0);
-	rc = ide_queue_pc_tail(drive, tape->disk, &pc);
+	rc = ide_queue_pc_tail(drive, tape->disk, &pc, NULL, 0);
 	if (rc)
 		return rc;
 	idetape_wait_ready(drive, 60 * 5 * HZ);
 	return 0;
 }
 
-static void idetape_create_read_position_cmd(struct ide_atapi_pc *pc)
-{
-	ide_init_pc(pc);
-	pc->c[0] = READ_POSITION;
-	pc->req_xfer = 20;
-}
-
-static int idetape_read_position(ide_drive_t *drive)
+static int ide_tape_read_position(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	struct ide_atapi_pc pc;
-	int position;
+	u8 buf[20];
 
 	debug_log(DBG_PROCS, "Enter %s\n", __func__);
 
-	idetape_create_read_position_cmd(&pc);
-	if (ide_queue_pc_tail(drive, tape->disk, &pc))
+	/* prep cmd */
+	ide_init_pc(&pc);
+	pc.c[0] = READ_POSITION;
+	pc.req_xfer = 20;
+
+	if (ide_queue_pc_tail(drive, tape->disk, &pc, buf, pc.req_xfer))
 		return -1;
-	position = tape->first_frame;
-	return position;
+
+	if (!pc.error) {
+		debug_log(DBG_SENSE, "BOP - %s\n",
+				(buf[0] & 0x80) ? "Yes" : "No");
+		debug_log(DBG_SENSE, "EOP - %s\n",
+				(buf[0] & 0x40) ? "Yes" : "No");
+
+		if (buf[0] & 0x4) {
+			printk(KERN_INFO "ide-tape: Block location is unknown"
+					 "to the tape\n");
+			clear_bit(ilog2(IDE_AFLAG_ADDRESS_VALID),
+				  &drive->atapi_flags);
+			return -1;
+		} else {
+			debug_log(DBG_SENSE, "Block Location - %u\n",
+					be32_to_cpup((__be32 *)&buf[4]));
+
+			tape->partition = buf[1];
+			tape->first_frame = be32_to_cpup((__be32 *)&buf[4]);
+			set_bit(ilog2(IDE_AFLAG_ADDRESS_VALID),
+				&drive->atapi_flags);
+		}
+	}
+
+	return tape->first_frame;
 }
 
 static void idetape_create_locate_cmd(ide_drive_t *drive,
@@ -836,19 +821,21 @@ static int idetape_position_tape(ide_drive_t *drive, unsigned int block,
 {
 	idetape_tape_t *tape = drive->driver_data;
 	struct gendisk *disk = tape->disk;
-	int retval;
+	int ret;
 	struct ide_atapi_pc pc;
 
 	if (tape->chrdev_dir == IDETAPE_DIR_READ)
 		__ide_tape_discard_merge_buffer(drive);
 	idetape_wait_ready(drive, 60 * 5 * HZ);
 	idetape_create_locate_cmd(drive, &pc, block, partition, skip);
-	retval = ide_queue_pc_tail(drive, disk, &pc);
-	if (retval)
-		return (retval);
+	ret = ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
+	if (ret)
+		return ret;
 
-	idetape_create_read_position_cmd(&pc);
-	return ide_queue_pc_tail(drive, disk, &pc);
+	ret = ide_tape_read_position(drive);
+	if (ret < 0)
+		return ret;
+	return 0;
 }
 
 static void ide_tape_discard_merge_buffer(ide_drive_t *drive,
@@ -859,7 +846,7 @@ static void ide_tape_discard_merge_buffer(ide_drive_t *drive,
 
 	__ide_tape_discard_merge_buffer(drive);
 	if (restore_position) {
-		position = idetape_read_position(drive);
+		position = ide_tape_read_position(drive);
 		seek = position > 0 ? position : 0;
 		if (idetape_position_tape(drive, seek, 0, 0)) {
 			printk(KERN_INFO "ide-tape: %s: position_tape failed in"
@@ -1039,20 +1026,19 @@ static int idetape_rewind_tape(ide_drive_t *drive)
 {
 	struct ide_tape_obj *tape = drive->driver_data;
 	struct gendisk *disk = tape->disk;
-	int retval;
 	struct ide_atapi_pc pc;
+	int ret;
 
 	debug_log(DBG_SENSE, "Enter %s\n", __func__);
 
 	idetape_create_rewind_cmd(drive, &pc);
-	retval = ide_queue_pc_tail(drive, disk, &pc);
-	if (retval)
-		return retval;
+	ret = ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
+	if (ret)
+		return ret;
 
-	idetape_create_read_position_cmd(&pc);
-	retval = ide_queue_pc_tail(drive, disk, &pc);
-	if (retval)
-		return retval;
+	ret = ide_tape_read_position(drive);
+	if (ret < 0)
+		return ret;
 	return 0;
 }
 
@@ -1119,7 +1105,7 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op,
 	case MTBSF:
 		idetape_create_space_cmd(&pc, mt_count - count,
 					 IDETAPE_SPACE_OVER_FILEMARK);
-		return ide_queue_pc_tail(drive, disk, &pc);
+		return ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
 	case MTFSFM:
 	case MTBSFM:
 		if (!sprev)
@@ -1259,7 +1245,7 @@ static int idetape_write_filemark(ide_drive_t *drive)
 
 	/* Write a filemark */
 	idetape_create_write_filemark_cmd(drive, &pc, 1);
-	if (ide_queue_pc_tail(drive, tape->disk, &pc)) {
+	if (ide_queue_pc_tail(drive, tape->disk, &pc, NULL, 0)) {
 		printk(KERN_ERR "ide-tape: Couldn't write a filemark\n");
 		return -EIO;
 	}
@@ -1345,11 +1331,11 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
 			IDETAPE_LU_RETENSION_MASK | IDETAPE_LU_LOAD_MASK);
 	case MTEOM:
 		idetape_create_space_cmd(&pc, 0, IDETAPE_SPACE_TO_EOD);
-		return ide_queue_pc_tail(drive, disk, &pc);
+		return ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
 	case MTERASE:
 		(void)idetape_rewind_tape(drive);
 		idetape_create_erase_cmd(&pc);
-		return ide_queue_pc_tail(drive, disk, &pc);
+		return ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
 	case MTSETBLK:
 		if (mt_count) {
 			if (mt_count < tape->blk_size ||
@@ -1415,7 +1401,7 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file,
 	if (cmd == MTIOCGET || cmd == MTIOCPOS) {
 		block_offset = tape->valid /
 			(tape->blk_size * tape->user_bs_factor);
-		position = idetape_read_position(drive);
+		position = ide_tape_read_position(drive);
 		if (position < 0)
 			return -EIO;
 	}
@@ -1458,9 +1444,10 @@ static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	struct ide_atapi_pc pc;
+	u8 buf[12];
 
 	idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR);
-	if (ide_queue_pc_tail(drive, tape->disk, &pc)) {
+	if (ide_queue_pc_tail(drive, tape->disk, &pc, buf, pc.req_xfer)) {
 		printk(KERN_ERR "ide-tape: Can't get block descriptor\n");
 		if (tape->blk_size == 0) {
 			printk(KERN_WARNING "ide-tape: Cannot deal with zero "
@@ -1469,10 +1456,10 @@ static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive)
 		}
 		return;
 	}
-	tape->blk_size = (pc.buf[4 + 5] << 16) +
-				(pc.buf[4 + 6] << 8)  +
-				 pc.buf[4 + 7];
-	tape->drv_write_prot = (pc.buf[2] & 0x80) >> 7;
+	tape->blk_size = (buf[4 + 5] << 16) +
+				(buf[4 + 6] << 8)  +
+				 buf[4 + 7];
+	tape->drv_write_prot = (buf[2] & 0x80) >> 7;
 }
 
 static int idetape_chrdev_open(struct inode *inode, struct file *filp)
@@ -1517,7 +1504,7 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
 		goto out_put_tape;
 	}
 
-	idetape_read_position(drive);
+	ide_tape_read_position(drive);
 	if (!test_bit(ilog2(IDE_AFLAG_ADDRESS_VALID), &drive->atapi_flags))
 		(void)idetape_rewind_tape(drive);
 
@@ -1615,17 +1602,14 @@ static void idetape_get_inquiry_results(ide_drive_t *drive)
 	char fw_rev[4], vendor_id[8], product_id[16];
 
 	idetape_create_inquiry_cmd(&pc);
-	pc.buf = &pc_buf[0];
-	pc.buf_size = sizeof(pc_buf);
-
-	if (ide_queue_pc_tail(drive, tape->disk, &pc)) {
+	if (ide_queue_pc_tail(drive, tape->disk, &pc, pc_buf, pc.req_xfer)) {
 		printk(KERN_ERR "ide-tape: %s: can't get INQUIRY results\n",
 				tape->name);
 		return;
 	}
-	memcpy(vendor_id, &pc.buf[8], 8);
-	memcpy(product_id, &pc.buf[16], 16);
-	memcpy(fw_rev, &pc.buf[32], 4);
+	memcpy(vendor_id, &pc_buf[8], 8);
+	memcpy(product_id, &pc_buf[16], 16);
+	memcpy(fw_rev, &pc_buf[32], 4);
 
 	ide_fixstring(vendor_id, 8, 0);
 	ide_fixstring(product_id, 16, 0);
@@ -1643,11 +1627,11 @@ static void idetape_get_mode_sense_results(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	struct ide_atapi_pc pc;
-	u8 *caps;
+	u8 buf[24], *caps;
 	u8 speed, max_speed;
 
 	idetape_create_mode_sense_cmd(&pc, IDETAPE_CAPABILITIES_PAGE);
-	if (ide_queue_pc_tail(drive, tape->disk, &pc)) {
+	if (ide_queue_pc_tail(drive, tape->disk, &pc, buf, pc.req_xfer)) {
 		printk(KERN_ERR "ide-tape: Can't get tape parameters - assuming"
 				" some default values\n");
 		tape->blk_size = 512;
@@ -1656,7 +1640,7 @@ static void idetape_get_mode_sense_results(ide_drive_t *drive)
 		put_unaligned(6*52, (u16 *)&tape->caps[16]);
 		return;
 	}
-	caps = pc.buf + 4 + pc.buf[3];
+	caps = buf + 4 + buf[3];
 
 	/* convert to host order and save for later use */
 	speed = be16_to_cpup((__be16 *)&caps[14]);
diff --git a/drivers/ide/ide-xfer-mode.c b/drivers/ide/ide-xfer-mode.c
index af44be9d546..46d203ce60c 100644
--- a/drivers/ide/ide-xfer-mode.c
+++ b/drivers/ide/ide-xfer-mode.c
@@ -107,6 +107,18 @@ u8 ide_get_best_pio_mode(ide_drive_t *drive, u8 mode_wanted, u8 max_mode)
 }
 EXPORT_SYMBOL_GPL(ide_get_best_pio_mode);
 
+int ide_pio_need_iordy(ide_drive_t *drive, const u8 pio)
+{
+	/*
+	 * IORDY may lead to controller lock up on certain controllers
+	 * if the port is not occupied.
+	 */
+	if (pio == 0 && (drive->hwif->port_flags & IDE_PFLAG_PROBING))
+		return 0;
+	return ata_id_pio_need_iordy(drive->id, pio);
+}
+EXPORT_SYMBOL_GPL(ide_pio_need_iordy);
+
 int ide_set_pio_mode(ide_drive_t *drive, const u8 mode)
 {
 	ide_hwif_t *hwif = drive->hwif;
diff --git a/drivers/ide/it8172.c b/drivers/ide/it8172.c
index e021078cd06..0d266a5b524 100644
--- a/drivers/ide/it8172.c
+++ b/drivers/ide/it8172.c
@@ -66,7 +66,7 @@ static void it8172_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	if (drive->media == ide_disk)
 		/* enable prefetch */
 		drive_enables |= 0x0004 << (drive->dn * 4);
-	if (ata_id_has_iordy(drive->id))
+	if (ide_pio_need_iordy(drive, pio))
 		/* enable IORDY sample-point */
 		drive_enables |= 0x0002 << (drive->dn * 4);
 
diff --git a/drivers/ide/it8213.c b/drivers/ide/it8213.c
index d7969b6d139..47976167796 100644
--- a/drivers/ide/it8213.c
+++ b/drivers/ide/it8213.c
@@ -50,7 +50,7 @@ static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio)
 		control |= 1;	/* Programmable timing on */
 	if (drive->media != ide_disk)
 		control |= 4;	/* ATAPI */
-	if (pio > 2)
+	if (ide_pio_need_iordy(drive, pio))
 		control |= 2;	/* IORDY */
 	if (is_slave) {
 		master_data |=  0x4000;
diff --git a/drivers/ide/macide.c b/drivers/ide/macide.c
index 1447c8c9056..505ec43e560 100644
--- a/drivers/ide/macide.c
+++ b/drivers/ide/macide.c
@@ -53,17 +53,20 @@
 
 volatile unsigned char *ide_ifr = (unsigned char *) (IDE_BASE + IDE_IFR);
 
-int macide_ack_intr(ide_hwif_t* hwif)
+int macide_test_irq(ide_hwif_t *hwif)
 {
-	if (*ide_ifr & 0x20) {
-		*ide_ifr &= ~0x20;
+	if (*ide_ifr & 0x20)
 		return 1;
-	}
 	return 0;
 }
 
+static void macide_clear_irq(ide_drive_t *drive)
+{
+	*ide_ifr &= ~0x20;
+}
+
 static void __init macide_setup_ports(struct ide_hw *hw, unsigned long base,
-				      int irq, ide_ack_intr_t *ack_intr)
+				      int irq)
 {
 	int i;
 
@@ -75,10 +78,15 @@ static void __init macide_setup_ports(struct ide_hw *hw, unsigned long base,
 	hw->io_ports.ctl_addr = base + IDE_CONTROL;
 
 	hw->irq = irq;
-	hw->ack_intr = ack_intr;
 }
 
+static const struct ide_port_ops macide_port_ops = {
+	.clear_irq		= macide_clear_irq,
+	.test_irq		= macide_test_irq,
+};
+
 static const struct ide_port_info macide_port_info = {
+	.port_ops		= &macide_port_ops,
 	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
 	.irq_flags		= IRQF_SHARED,
 	.chipset		= ide_generic,
@@ -93,10 +101,10 @@ static const char *mac_ide_name[] =
 
 static int __init macide_init(void)
 {
-	ide_ack_intr_t *ack_intr;
 	unsigned long base;
 	int irq;
 	struct ide_hw hw, *hws[] = { &hw };
+	struct ide_port_info d = macide_port_info;
 
 	if (!MACH_IS_MAC)
 		return -ENODEV;
@@ -104,17 +112,15 @@ static int __init macide_init(void)
 	switch (macintosh_config->ide_type) {
 	case MAC_IDE_QUADRA:
 		base = IDE_BASE;
-		ack_intr = macide_ack_intr;
 		irq = IRQ_NUBUS_F;
 		break;
 	case MAC_IDE_PB:
 		base = IDE_BASE;
-		ack_intr = macide_ack_intr;
 		irq = IRQ_NUBUS_C;
 		break;
 	case MAC_IDE_BABOON:
 		base = BABOON_BASE;
-		ack_intr = NULL;
+		d.port_ops = NULL;
 		irq = IRQ_BABOON_1;
 		break;
 	default:
@@ -124,9 +130,9 @@ static int __init macide_init(void)
 	printk(KERN_INFO "ide: Macintosh %s IDE controller\n",
 			 mac_ide_name[macintosh_config->ide_type - 1]);
 
-	macide_setup_ports(&hw, base, irq, ack_intr);
+	macide_setup_ports(&hw, base, irq);
 
-	return ide_host_add(&macide_port_info, hws, 1, NULL);
+	return ide_host_add(&d, hws, 1, NULL);
 }
 
 module_init(macide_init);
diff --git a/drivers/ide/opti621.c b/drivers/ide/opti621.c
index 6048eda3cd6..f1d70d6630f 100644
--- a/drivers/ide/opti621.c
+++ b/drivers/ide/opti621.c
@@ -138,6 +138,7 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	ide_hwif_t *hwif = drive->hwif;
 	ide_drive_t *pair = ide_get_pair_dev(drive);
 	unsigned long flags;
+	unsigned long mode = XFER_PIO_0 + pio, pair_mode;
 	u8 tim, misc, addr_pio = pio, clk;
 
 	/* DRDY is default 2 (by OPTi Databook) */
@@ -150,11 +151,12 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
 		{ 0x48, 0x34, 0x21, 0x10, 0x10 }	/* 25 MHz */
 	};
 
-	drive->drive_data = XFER_PIO_0 + pio;
+	ide_set_drivedata(drive, (void *)mode);
 
 	if (pair) {
-		if (pair->drive_data && pair->drive_data < drive->drive_data)
-			addr_pio = pair->drive_data - XFER_PIO_0;
+		pair_mode = (unsigned long)ide_get_drivedata(pair);
+		if (pair_mode && pair_mode < mode)
+			addr_pio = pair_mode - XFER_PIO_0;
 	}
 
 	spin_lock_irqsave(&opti621_lock, flags);
diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c
index b6abf7e52ca..cb812f3700e 100644
--- a/drivers/ide/pdc202xx_old.c
+++ b/drivers/ide/pdc202xx_old.c
@@ -73,7 +73,7 @@ static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
 		 * Prefetch_EN / IORDY_EN / PA[3:0] bits of register A
 		 */
 		AP &= ~0x3f;
-		if (ata_id_iordy_disable(drive->id))
+		if (ide_pio_need_iordy(drive, speed - XFER_PIO_0))
 			AP |= 0x20;	/* set IORDY_EN bit */
 		if (drive->media == ide_disk)
 			AP |= 0x10;	/* set Prefetch_EN bit */
@@ -104,6 +104,27 @@ static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	pdc202xx_set_mode(drive, XFER_PIO_0 + pio);
 }
 
+static int pdc202xx_test_irq(ide_hwif_t *hwif)
+{
+	struct pci_dev *dev	= to_pci_dev(hwif->dev);
+	unsigned long high_16	= pci_resource_start(dev, 4);
+	u8 sc1d			= inb(high_16 + 0x1d);
+
+	if (hwif->channel) {
+		/*
+		 * bit 7: error, bit 6: interrupting,
+		 * bit 5: FIFO full, bit 4: FIFO empty
+		 */
+		return ((sc1d & 0x50) == 0x40) ? 1 : 0;
+	} else	{
+		/*
+		 * bit 3: error, bit 2: interrupting,
+		 * bit 1: FIFO full, bit 0: FIFO empty
+		 */
+		return ((sc1d & 0x05) == 0x04) ? 1 : 0;
+	}
+}
+
 static u8 pdc2026x_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
@@ -231,6 +252,7 @@ static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev,
 static const struct ide_port_ops pdc20246_port_ops = {
 	.set_pio_mode		= pdc202xx_set_pio_mode,
 	.set_dma_mode		= pdc202xx_set_mode,
+	.test_irq		= pdc202xx_test_irq,
 };
 
 static const struct ide_port_ops pdc2026x_port_ops = {
diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c
index 69860dea382..bf14f39bd3a 100644
--- a/drivers/ide/piix.c
+++ b/drivers/ide/piix.c
@@ -98,7 +98,7 @@ static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio)
 		control |= 1;	/* Programmable timing on */
 	if (drive->media == ide_disk)
 		control |= 4;	/* Prefetch, post write */
-	if (pio > 2)
+	if (ide_pio_need_iordy(drive, pio))
 		control |= 2;	/* IORDY */
 	if (is_slave) {
 		master_data |=  0x4000;
diff --git a/drivers/ide/q40ide.c b/drivers/ide/q40ide.c
index ab49a97023d..90786083b43 100644
--- a/drivers/ide/q40ide.c
+++ b/drivers/ide/q40ide.c
@@ -51,9 +51,7 @@ static int q40ide_default_irq(unsigned long base)
 /*
  * Addresses are pretranslated for Q40 ISA access.
  */
-static void q40_ide_setup_ports(struct ide_hw *hw, unsigned long base,
-			ide_ack_intr_t *ack_intr,
-			int irq)
+static void q40_ide_setup_ports(struct ide_hw *hw, unsigned long base, int irq)
 {
 	memset(hw, 0, sizeof(*hw));
 	/* BIG FAT WARNING: 
@@ -69,7 +67,6 @@ static void q40_ide_setup_ports(struct ide_hw *hw, unsigned long base,
 	hw->io_ports.ctl_addr = Q40_ISA_IO_B(base + 0x206);
 
 	hw->irq = irq;
-	hw->ack_intr = ack_intr;
 }
 
 static void q40ide_input_data(ide_drive_t *drive, struct ide_cmd *cmd,
@@ -156,7 +153,7 @@ static int __init q40ide_init(void)
 		release_region(pcide_bases[i], 8);
 		continue;
 	}
-	q40_ide_setup_ports(&hw[i], pcide_bases[i], NULL,
+	q40_ide_setup_ports(&hw[i], pcide_bases[i],
 			q40ide_default_irq(pcide_bases[i]));
 
 	hws[i] = &hw[i];
diff --git a/drivers/ide/qd65xx.c b/drivers/ide/qd65xx.c
index c9a13498689..74696edc8d1 100644
--- a/drivers/ide/qd65xx.c
+++ b/drivers/ide/qd65xx.c
@@ -180,8 +180,11 @@ static int qd_find_disk_type (ide_drive_t *drive,
 
 static void qd_set_timing (ide_drive_t *drive, u8 timing)
 {
-	drive->drive_data &= 0xff00;
-	drive->drive_data |= timing;
+	unsigned long data = (unsigned long)ide_get_drivedata(drive);
+
+	data &= 0xff00;
+	data |= timing;
+	ide_set_drivedata(drive, (void *)data);
 
 	printk(KERN_DEBUG "%s: %#x\n", drive->name, timing);
 }
@@ -292,7 +295,7 @@ static void __init qd6500_init_dev(ide_drive_t *drive)
 	u8 base = (hwif->config_data & 0xff00) >> 8;
 	u8 config = QD_CONFIG(hwif);
 
-	drive->drive_data = QD6500_DEF_DATA;
+	ide_set_drivedata(drive, (void *)QD6500_DEF_DATA);
 }
 
 static void __init qd6580_init_dev(ide_drive_t *drive)
@@ -308,7 +311,7 @@ static void __init qd6580_init_dev(ide_drive_t *drive)
 	} else
 		t2 = t1 = hwif->channel ? QD6580_DEF_DATA2 : QD6580_DEF_DATA;
 
-	drive->drive_data = (drive->dn & 1) ? t2 : t1;
+	ide_set_drivedata(drive, (void *)((drive->dn & 1) ? t2 : t1));
 }
 
 static const struct ide_tp_ops qd65xx_tp_ops = {
diff --git a/drivers/ide/qd65xx.h b/drivers/ide/qd65xx.h
index d7e67a1a1dc..1fba2a5f281 100644
--- a/drivers/ide/qd65xx.h
+++ b/drivers/ide/qd65xx.h
@@ -31,8 +31,15 @@
 
 #define QD_CONFIG(hwif)		((hwif)->config_data & 0x00ff)
 
-#define QD_TIMING(drive)	(u8)(((drive)->drive_data) & 0x00ff)
-#define QD_TIMREG(drive)	(u8)((((drive)->drive_data) & 0xff00) >> 8)
+static inline u8 QD_TIMING(ide_drive_t *drive)
+{
+	return (unsigned long)ide_get_drivedata(drive) & 0x00ff;
+}
+
+static inline u8 QD_TIMREG(ide_drive_t *drive)
+{
+	return ((unsigned long)ide_get_drivedata(drive) & 0xff00) >> 8;
+}
 
 #define QD6500_DEF_DATA		((QD_TIM1_PORT<<8) | (QD_ID3 ? 0x0c : 0x08))
 #define QD6580_DEF_DATA		((QD_TIM1_PORT<<8) | (QD_ID3 ? 0x0a : 0x00))
diff --git a/drivers/ide/sgiioc4.c b/drivers/ide/sgiioc4.c
index 5f37f168f94..b7d61dc6409 100644
--- a/drivers/ide/sgiioc4.c
+++ b/drivers/ide/sgiioc4.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2003-2006 Silicon Graphics, Inc.  All Rights Reserved.
- * Copyright (C) 2008 MontaVista Software, Inc.
+ * Copyright (C) 2008-2009 MontaVista Software, Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License
@@ -29,8 +29,7 @@
 #include <linux/blkdev.h>
 #include <linux/scatterlist.h>
 #include <linux/ioc4.h>
-#include <asm/io.h>
-
+#include <linux/io.h>
 #include <linux/ide.h>
 
 #define DRV_NAME "SGIIOC4"
@@ -72,7 +71,7 @@
 #define IOC4_CMD_CTL_BLK_SIZE	0x20
 #define IOC4_SUPPORTED_FIRMWARE_REV 46
 
-typedef struct {
+struct ioc4_dma_regs {
 	u32 timing_reg0;
 	u32 timing_reg1;
 	u32 low_mem_ptr;
@@ -82,17 +81,18 @@ typedef struct {
 	u32 dev_byte_count;
 	u32 mem_byte_count;
 	u32 status;
-} ioc4_dma_regs_t;
+};
 
 /* Each Physical Region Descriptor Entry size is 16 bytes (2 * 64 bits) */
 /* IOC4 has only 1 IDE channel */
-#define IOC4_PRD_BYTES       16
-#define IOC4_PRD_ENTRIES     (PAGE_SIZE /(4*IOC4_PRD_BYTES))
+#define IOC4_PRD_BYTES		16
+#define IOC4_PRD_ENTRIES	(PAGE_SIZE / (4 * IOC4_PRD_BYTES))
 
 
-static void
-sgiioc4_init_hwif_ports(struct ide_hw *hw, unsigned long data_port,
-			unsigned long ctrl_port, unsigned long irq_port)
+static void sgiioc4_init_hwif_ports(struct ide_hw *hw,
+				    unsigned long data_port,
+				    unsigned long ctrl_port,
+				    unsigned long irq_port)
 {
 	unsigned long reg = data_port;
 	int i;
@@ -105,13 +105,11 @@ sgiioc4_init_hwif_ports(struct ide_hw *hw, unsigned long data_port,
 	hw->io_ports.irq_addr = irq_port;
 }
 
-static int
-sgiioc4_checkirq(ide_hwif_t * hwif)
+static int sgiioc4_checkirq(ide_hwif_t *hwif)
 {
-	unsigned long intr_addr =
-		hwif->io_ports.irq_addr + IOC4_INTR_REG * 4;
+	unsigned long intr_addr = hwif->io_ports.irq_addr + IOC4_INTR_REG * 4;
 
-	if ((u8)readl((void __iomem *)intr_addr) & 0x03)
+	if (readl((void __iomem *)intr_addr) & 0x03)
 		return 1;
 
 	return 0;
@@ -119,8 +117,7 @@ sgiioc4_checkirq(ide_hwif_t * hwif)
 
 static u8 sgiioc4_read_status(ide_hwif_t *);
 
-static int
-sgiioc4_clearirq(ide_drive_t * drive)
+static int sgiioc4_clearirq(ide_drive_t *drive)
 {
 	u32 intr_reg;
 	ide_hwif_t *hwif = drive->hwif;
@@ -158,12 +155,10 @@ sgiioc4_clearirq(ide_drive_t * drive)
 				readl((void __iomem *)(io_ports->irq_addr + 4));
 			pci_read_config_dword(dev, PCI_COMMAND,
 					      &pci_stat_cmd_reg);
-			printk(KERN_ERR
-			       "%s(%s) : PCI Bus Error when doing DMA:"
-				   " status-cmd reg is 0x%x\n",
+			printk(KERN_ERR "%s(%s): PCI Bus Error when doing DMA: "
+			       "status-cmd reg is 0x%x\n",
 			       __func__, drive->name, pci_stat_cmd_reg);
-			printk(KERN_ERR
-			       "%s(%s) : PCI Error Address is 0x%x%x\n",
+			printk(KERN_ERR "%s(%s): PCI Error Address is 0x%x%x\n",
 			       __func__, drive->name,
 			       pci_err_addr_high, pci_err_addr_low);
 			/* Clear the PCI Error indicator */
@@ -189,8 +184,7 @@ static void sgiioc4_dma_start(ide_drive_t *drive)
 	writel(temp_reg, (void __iomem *)ioc4_dma_addr);
 }
 
-static u32
-sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base)
+static u32 sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base)
 {
 	unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4;
 	u32	ioc4_dma;
@@ -227,7 +221,7 @@ static int sgiioc4_dma_end(ide_drive_t *drive)
 	}
 
 	/*
-	 * The IOC4 will DMA 1's to the ending dma area to indicate that
+	 * The IOC4 will DMA 1's to the ending DMA area to indicate that
 	 * previous data DMA is complete.  This is necessary because of relaxed
 	 * ordering between register reads and DMA writes on the Altix.
 	 */
@@ -265,7 +259,7 @@ static void sgiioc4_set_dma_mode(ide_drive_t *drive, const u8 speed)
 {
 }
 
-/* returns 1 if dma irq issued, 0 otherwise */
+/* Returns 1 if DMA IRQ issued, 0 otherwise */
 static int sgiioc4_dma_test_irq(ide_drive_t *drive)
 {
 	return sgiioc4_checkirq(drive->hwif);
@@ -286,8 +280,7 @@ static void sgiioc4_resetproc(ide_drive_t *drive)
 	sgiioc4_clearirq(drive);
 }
 
-static void
-sgiioc4_dma_lost_irq(ide_drive_t * drive)
+static void sgiioc4_dma_lost_irq(ide_drive_t *drive)
 {
 	sgiioc4_resetproc(drive);
 
@@ -313,13 +306,13 @@ static u8 sgiioc4_read_status(ide_hwif_t *hwif)
 	return reg;
 }
 
-/* Creates a dma map for the scatter-gather list entries */
-static int __devinit
-ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d)
+/* Creates a DMA map for the scatter-gather list entries */
+static int __devinit ide_dma_sgiioc4(ide_hwif_t *hwif,
+				     const struct ide_port_info *d)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	unsigned long dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET;
-	int num_ports = sizeof (ioc4_dma_regs_t);
+	int num_ports = sizeof(struct ioc4_dma_regs);
 	void *pad;
 
 	printk(KERN_INFO "    %s: MMIO-DMA\n", hwif->name);
@@ -362,8 +355,7 @@ dma_pci_alloc_failure:
 }
 
 /* Initializes the IOC4 DMA Engine */
-static void
-sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive)
+static void sgiioc4_configure_for_dma(int dma_direction, ide_drive_t *drive)
 {
 	u32 ioc4_dma;
 	ide_hwif_t *hwif = drive->hwif;
@@ -374,31 +366,27 @@ sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive)
 	ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
 
 	if (ioc4_dma & IOC4_S_DMA_ACTIVE) {
-		printk(KERN_WARNING
-			"%s(%s):Warning!! DMA from previous transfer was still active\n",
-		       __func__, drive->name);
+		printk(KERN_WARNING "%s(%s): Warning!! DMA from previous "
+		       "transfer was still active\n", __func__, drive->name);
 		writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
 		ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
 
 		if (ioc4_dma & IOC4_S_DMA_STOP)
-			printk(KERN_ERR
-			       "%s(%s) : IOC4 Dma STOP bit is still 1\n",
-			       __func__, drive->name);
+			printk(KERN_ERR "%s(%s): IOC4 DMA STOP bit is "
+			       "still 1\n", __func__, drive->name);
 	}
 
 	ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
 	if (ioc4_dma & IOC4_S_DMA_ERROR) {
-		printk(KERN_WARNING
-		       "%s(%s) : Warning!! - DMA Error during Previous"
-		       " transfer | status 0x%x\n",
+		printk(KERN_WARNING "%s(%s): Warning!! DMA Error during "
+		       "previous transfer, status 0x%x\n",
 		       __func__, drive->name, ioc4_dma);
 		writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
 		ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
 
 		if (ioc4_dma & IOC4_S_DMA_STOP)
-			printk(KERN_ERR
-			       "%s(%s) : IOC4 DMA STOP bit is still 1\n",
-			       __func__, drive->name);
+			printk(KERN_ERR "%s(%s): IOC4 DMA STOP bit is "
+			       "still 1\n", __func__, drive->name);
 	}
 
 	/* Address of the Scatter Gather List */
@@ -408,20 +396,22 @@ sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive)
 	/* Address of the Ending DMA */
 	memset(ide_get_hwifdata(hwif), 0, IOC4_IDE_CACHELINE_SIZE);
 	ending_dma_addr = cpu_to_le32(hwif->extra_base);
-	writel(ending_dma_addr, (void __iomem *)(dma_base + IOC4_DMA_END_ADDR * 4));
+	writel(ending_dma_addr, (void __iomem *)(dma_base +
+						 IOC4_DMA_END_ADDR * 4));
 
 	writel(dma_direction, (void __iomem *)ioc4_dma_addr);
 }
 
-/* IOC4 Scatter Gather list Format 					 */
+/* IOC4 Scatter Gather list Format					 */
 /* 128 Bit entries to support 64 bit addresses in the future		 */
 /* The Scatter Gather list Entry should be in the BIG-ENDIAN Format	 */
 /* --------------------------------------------------------------------- */
-/* | Upper 32 bits - Zero           |	 	Lower 32 bits- address | */
+/* | Upper 32 bits - Zero	    |		Lower 32 bits- address | */
 /* --------------------------------------------------------------------- */
 /* | Upper 32 bits - Zero	    |EOL| 15 unused     | 16 Bit Length| */
 /* --------------------------------------------------------------------- */
-/* Creates the scatter gather list, DMA Table */
+/* Creates the scatter gather list, DMA Table				 */
+
 static int sgiioc4_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	ide_hwif_t *hwif = drive->hwif;
@@ -448,8 +438,10 @@ static int sgiioc4_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
 				if (bcount > cur_len)
 					bcount = cur_len;
 
-				/* put the addr, length in
-				 * the IOC4 dma-table format */
+				/*
+				 * Put the address, length in
+				 * the IOC4 dma-table format
+				 */
 				*table = 0x0;
 				table++;
 				*table = cpu_to_be32(cur_addr);
@@ -540,8 +532,7 @@ static const struct ide_port_info sgiioc4_port_info __devinitconst = {
 	.mwdma_mask		= ATA_MWDMA2_ONLY,
 };
 
-static int __devinit
-sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
+static int __devinit sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 {
 	unsigned long cmd_base, irqport;
 	unsigned long bar0, cmd_phys_base, ctl;
@@ -549,7 +540,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 	struct ide_hw hw, *hws[] = { &hw };
 	int rc;
 
-	/*  Get the CmdBlk and CtrlBlk Base Registers */
+	/* Get the CmdBlk and CtrlBlk base registers */
 	bar0 = pci_resource_start(dev, 0);
 	virt_base = pci_ioremap_bar(dev, 0);
 	if (virt_base == NULL) {
@@ -557,9 +548,9 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 				DRV_NAME, bar0);
 		return -ENOMEM;
 	}
-	cmd_base = (unsigned long) virt_base + IOC4_CMD_OFFSET;
-	ctl = (unsigned long) virt_base + IOC4_CTRL_OFFSET;
-	irqport = (unsigned long) virt_base + IOC4_INTR_OFFSET;
+	cmd_base = (unsigned long)virt_base + IOC4_CMD_OFFSET;
+	ctl = (unsigned long)virt_base + IOC4_CTRL_OFFSET;
+	irqport = (unsigned long)virt_base + IOC4_INTR_OFFSET;
 
 	cmd_phys_base = bar0 + IOC4_CMD_OFFSET;
 	if (request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
@@ -577,7 +568,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 	hw.irq = dev->irq;
 	hw.dev = &dev->dev;
 
-	/* Initializing chipset IRQ Registers */
+	/* Initialize chipset IRQ registers */
 	writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
 
 	rc = ide_host_add(&sgiioc4_port_info, hws, 1, NULL);
@@ -590,8 +581,7 @@ req_mem_rgn_err:
 	return rc;
 }
 
-static unsigned int __devinit
-pci_init_sgiioc4(struct pci_dev *dev)
+static unsigned int __devinit pci_init_sgiioc4(struct pci_dev *dev)
 {
 	int ret;
 
@@ -611,10 +601,10 @@ out:
 	return ret;
 }
 
-int __devinit
-ioc4_ide_attach_one(struct ioc4_driver_data *idd)
+int __devinit ioc4_ide_attach_one(struct ioc4_driver_data *idd)
 {
-	/* PCI-RT does not bring out IDE connection.
+	/*
+	 * PCI-RT does not bring out IDE connection.
 	 * Do not attach to this particular IOC4.
 	 */
 	if (idd->idd_variant == IOC4_VARIANT_PCI_RT)
@@ -627,7 +617,6 @@ static struct ioc4_submodule __devinitdata ioc4_ide_submodule = {
 	.is_name = "IOC4_ide",
 	.is_owner = THIS_MODULE,
 	.is_probe = ioc4_ide_attach_one,
-/*	.is_remove = ioc4_ide_remove_one,	*/
 };
 
 static int __init ioc4_ide_init(void)
diff --git a/drivers/ide/siimage.c b/drivers/ide/siimage.c
index bd82d228608..d95df528562 100644
--- a/drivers/ide/siimage.c
+++ b/drivers/ide/siimage.c
@@ -32,7 +32,6 @@
  *  smarter code in libata.
  *
  * TODO:
- * - IORDY fixes
  * - VDMA support
  */
 
@@ -234,8 +233,7 @@ static u8 sil_sata_udma_filter(ide_drive_t *drive)
  *	@pio: PIO mode number
  *
  *	Load the timing settings for this device mode into the
- *	controller. If we are in PIO mode 3 or 4 turn on IORDY
- *	monitoring (bit 9). The TF timing is bits 31:16
+ *	controller.
  */
 
 static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
@@ -276,13 +274,16 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
 	/* now set up IORDY */
 	speedp = sil_ioread16(dev, tfaddr - 2);
 	speedp &= ~0x200;
-	if (pio > 2)
-		speedp |= 0x200;
-	sil_iowrite16(dev, speedp, tfaddr - 2);
 
 	mode = sil_ioread8(dev, base + addr_mask);
 	mode &= ~(unit ? 0x30 : 0x03);
-	mode |= unit ? 0x10 : 0x01;
+
+	if (ide_pio_need_iordy(drive, pio)) {
+		speedp |= 0x200;
+		mode |= unit ? 0x10 : 0x01;
+	}
+
+	sil_iowrite16(dev, speedp, tfaddr - 2);
 	sil_iowrite8(dev, mode, base + addr_mask);
 }
 
@@ -337,24 +338,14 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	sil_iowrite16(dev, ultra, ua);
 }
 
-/* returns 1 if dma irq issued, 0 otherwise */
-static int siimage_io_dma_test_irq(ide_drive_t *drive)
+static int sil_test_irq(ide_hwif_t *hwif)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	u8 dma_altstat		= 0;
 	unsigned long addr	= siimage_selreg(hwif, 1);
+	u8 val			= sil_ioread8(dev, addr);
 
-	/* return 1 if INTR asserted */
-	if (inb(hwif->dma_base + ATA_DMA_STATUS) & 4)
-		return 1;
-
-	/* return 1 if Device INTR asserted */
-	pci_read_config_byte(dev, addr, &dma_altstat);
-	if (dma_altstat & 8)
-		return 0;	/* return 1; */
-
-	return 0;
+	/* Return 1 if INTRQ asserted */
+	return (val & 8) ? 1 : 0;
 }
 
 /**
@@ -368,7 +359,6 @@ static int siimage_io_dma_test_irq(ide_drive_t *drive)
 static int siimage_mmio_dma_test_irq(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= drive->hwif;
-	unsigned long addr	= siimage_selreg(hwif, 0x1);
 	void __iomem *sata_error_addr
 		= (void __iomem *)hwif->sata_scr[SATA_ERROR_OFFSET];
 
@@ -397,10 +387,6 @@ static int siimage_mmio_dma_test_irq(ide_drive_t *drive)
 	if (readb((void __iomem *)(hwif->dma_base + ATA_DMA_STATUS)) & 4)
 		return 1;
 
-	/* return 1 if Device INTR asserted */
-	if (readb((void __iomem *)addr) & 8)
-		return 0;	/* return 1; */
-
 	return 0;
 }
 
@@ -409,7 +395,7 @@ static int siimage_dma_test_irq(ide_drive_t *drive)
 	if (drive->hwif->host_flags & IDE_HFLAG_MMIO)
 		return siimage_mmio_dma_test_irq(drive);
 	else
-		return siimage_io_dma_test_irq(drive);
+		return ide_dma_test_irq(drive);
 }
 
 /**
@@ -694,6 +680,7 @@ static const struct ide_port_ops sil_pata_port_ops = {
 	.set_pio_mode		= sil_set_pio_mode,
 	.set_dma_mode		= sil_set_dma_mode,
 	.quirkproc		= sil_quirkproc,
+	.test_irq		= sil_test_irq,
 	.udma_filter		= sil_pata_udma_filter,
 	.cable_detect		= sil_cable_detect,
 };
@@ -704,6 +691,7 @@ static const struct ide_port_ops sil_sata_port_ops = {
 	.reset_poll		= sil_sata_reset_poll,
 	.pre_reset		= sil_sata_pre_reset,
 	.quirkproc		= sil_quirkproc,
+	.test_irq		= sil_test_irq,
 	.udma_filter		= sil_sata_udma_filter,
 	.cable_detect		= sil_cable_detect,
 };
diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c
index 0924abff52f..d698da470d6 100644
--- a/drivers/ide/sl82c105.c
+++ b/drivers/ide/sl82c105.c
@@ -61,8 +61,7 @@ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio)
 	if (cmd_off == 0)
 		cmd_off = 1;
 
-	if ((pio > 2 || ata_id_has_iordy(drive->id)) &&
-	    !(pio > 4 && ata_id_is_cfa(drive->id)))
+	if (ide_pio_need_iordy(drive, pio))
 		iordy = 0x40;
 
 	return (cmd_on - 1) << 8 | (cmd_off - 1) | iordy;
@@ -74,6 +73,7 @@ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio)
 static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio)
 {
 	struct pci_dev *dev	= to_pci_dev(drive->hwif->dev);
+	unsigned long timings	= (unsigned long)ide_get_drivedata(drive);
 	int reg			= 0x44 + drive->dn * 4;
 	u16 drv_ctrl;
 
@@ -83,8 +83,9 @@ static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	 * Store the PIO timings so that we can restore them
 	 * in case DMA will be turned off...
 	 */
-	drive->drive_data &= 0xffff0000;
-	drive->drive_data |= drv_ctrl;
+	timings &= 0xffff0000;
+	timings |= drv_ctrl;
+	ide_set_drivedata(drive, (void *)timings);
 
 	pci_write_config_word(dev, reg,  drv_ctrl);
 	pci_read_config_word (dev, reg, &drv_ctrl);
@@ -100,6 +101,7 @@ static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio)
 static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed)
 {
 	static u16 mwdma_timings[] = {0x0707, 0x0201, 0x0200};
+	unsigned long timings = (unsigned long)ide_get_drivedata(drive);
 	u16 drv_ctrl;
 
  	DBG(("sl82c105_tune_chipset(drive:%s, speed:%s)\n",
@@ -111,8 +113,19 @@ static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	 * Store the DMA timings so that we can actually program
 	 * them when DMA will be turned on...
 	 */
-	drive->drive_data &= 0x0000ffff;
-	drive->drive_data |= (unsigned long)drv_ctrl << 16;
+	timings &= 0x0000ffff;
+	timings |= (unsigned long)drv_ctrl << 16;
+	ide_set_drivedata(drive, (void *)timings);
+}
+
+static int sl82c105_test_irq(ide_hwif_t *hwif)
+{
+	struct pci_dev *dev	= to_pci_dev(hwif->dev);
+	u32 val, mask		= hwif->channel ? CTRL_IDE_IRQB : CTRL_IDE_IRQA;
+
+	pci_read_config_dword(dev, 0x40, &val);
+
+	return (val & mask) ? 1 : 0;
 }
 
 /*
@@ -185,7 +198,8 @@ static void sl82c105_dma_start(ide_drive_t *drive)
 
 	DBG(("%s(drive:%s)\n", __func__, drive->name));
 
-	pci_write_config_word(dev, reg, drive->drive_data >> 16);
+	pci_write_config_word(dev, reg,
+			      (unsigned long)ide_get_drivedata(drive) >> 16);
 
 	sl82c105_reset_host(dev);
 	ide_dma_start(drive);
@@ -210,7 +224,8 @@ static int sl82c105_dma_end(ide_drive_t *drive)
 
 	ret = ide_dma_end(drive);
 
-	pci_write_config_word(dev, reg, drive->drive_data);
+	pci_write_config_word(dev, reg,
+			      (unsigned long)ide_get_drivedata(drive));
 
 	return ret;
 }
@@ -289,6 +304,7 @@ static const struct ide_port_ops sl82c105_port_ops = {
 	.set_pio_mode		= sl82c105_set_pio_mode,
 	.set_dma_mode		= sl82c105_set_dma_mode,
 	.resetproc		= sl82c105_resetproc,
+	.test_irq		= sl82c105_test_irq,
 };
 
 static const struct ide_dma_ops sl82c105_dma_ops = {
diff --git a/drivers/ide/slc90e66.c b/drivers/ide/slc90e66.c
index f55d7d6313e..9aec78d3bcf 100644
--- a/drivers/ide/slc90e66.c
+++ b/drivers/ide/slc90e66.c
@@ -44,7 +44,7 @@ static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio)
 		control |= 1;	/* Programmable timing on */
 	if (drive->media == ide_disk)
 		control |= 4;	/* Prefetch, post write */
-	if (pio > 2)
+	if (ide_pio_need_iordy(drive, pio))
 		control |= 2;	/* IORDY */
 	if (is_slave) {
 		master_data |=  0x4000;
diff --git a/drivers/ieee1394/Kconfig b/drivers/ieee1394/Kconfig
index 95f45f9b8e5..f102fcc7e52 100644
--- a/drivers/ieee1394/Kconfig
+++ b/drivers/ieee1394/Kconfig
@@ -4,7 +4,7 @@ menu "IEEE 1394 (FireWire) support"
 source "drivers/firewire/Kconfig"
 
 config IEEE1394
-	tristate "Stable FireWire stack"
+	tristate "Legacy alternative FireWire driver stack"
 	depends on PCI || BROKEN
 	help
 	  IEEE 1394 describes a high performance serial bus, which is also
@@ -33,11 +33,9 @@ config IEEE1394_OHCI1394
 	  module will be called ohci1394.
 
 	  NOTE:
-
-	  You should only build either ohci1394 or the new firewire-ohci driver,
-	  but not both.  If you nevertheless want to install both, you should
-	  configure them only as modules and blacklist the driver(s) which you
-	  don't want to have auto-loaded.  Add either
+	  If you want to install firewire-ohci and ohci1394 together, you
+	  should configure them only as modules and blacklist the driver(s)
+	  which you don't want to have auto-loaded.  Add either
 
 	      blacklist firewire-ohci
 	  or
@@ -46,12 +44,7 @@ config IEEE1394_OHCI1394
 	      blacklist dv1394
 
 	  to /etc/modprobe.conf or /etc/modprobe.d/* and update modprobe.conf
-	  depending on your distribution.  The latter two modules should be
-	  blacklisted together with ohci1394 because they depend on ohci1394.
-
-	  If you have an old modprobe which doesn't implement the blacklist
-	  directive, use "install modulename /bin/true" for the modules to be
-	  blacklisted.
+	  depending on your distribution.
 
 comment "PCILynx controller requires I2C"
 	depends on IEEE1394 && I2C=n
@@ -105,7 +98,7 @@ config IEEE1394_ETH1394_ROM_ENTRY
 	default n
 
 config IEEE1394_ETH1394
-	tristate "IP over 1394"
+	tristate "IP networking over 1394 (experimental)"
 	depends on IEEE1394 && EXPERIMENTAL && INET
 	select IEEE1394_ETH1394_ROM_ENTRY
 	help
diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c
index ce511d8748c..5be1bd4fc7e 100644
--- a/drivers/infiniband/core/addr.c
+++ b/drivers/infiniband/core/addr.c
@@ -514,7 +514,7 @@ static struct notifier_block nb = {
 	.notifier_call = netevent_callback
 };
 
-static int addr_init(void)
+static int __init addr_init(void)
 {
 	addr_wq = create_singlethread_workqueue("ib_addr");
 	if (!addr_wq)
@@ -524,7 +524,7 @@ static int addr_init(void)
 	return 0;
 }
 
-static void addr_cleanup(void)
+static void __exit addr_cleanup(void)
 {
 	unregister_netevent_notifier(&nb);
 	destroy_workqueue(addr_wq);
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 851de83ff45..075317884b5 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -2960,7 +2960,7 @@ static void cma_remove_one(struct ib_device *device)
 	kfree(cma_dev);
 }
 
-static int cma_init(void)
+static int __init cma_init(void)
 {
 	int ret, low, high, remaining;
 
@@ -2990,7 +2990,7 @@ err:
 	return ret;
 }
 
-static void cma_cleanup(void)
+static void __exit cma_cleanup(void)
 {
 	ib_unregister_client(&cma_client);
 	unregister_netdevice_notifier(&cma_nb);
diff --git a/drivers/infiniband/hw/ehca/ehca_hca.c b/drivers/infiniband/hw/ehca/ehca_hca.c
index 9209c5332df..8b92f85d4dd 100644
--- a/drivers/infiniband/hw/ehca/ehca_hca.c
+++ b/drivers/infiniband/hw/ehca/ehca_hca.c
@@ -319,7 +319,7 @@ int ehca_query_gid(struct ib_device *ibdev, u8 port,
 					      ib_device);
 	struct hipz_query_port *rblock;
 
-	if (index > 255) {
+	if (index < 0 || index > 255) {
 		ehca_err(&shca->ib_device, "Invalid index: %x.", index);
 		return -EINVAL;
 	}
diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c
index ce4e6eff479..fab18a2c74a 100644
--- a/drivers/infiniband/hw/ehca/ehca_main.c
+++ b/drivers/infiniband/hw/ehca/ehca_main.c
@@ -52,7 +52,7 @@
 #include "ehca_tools.h"
 #include "hcp_if.h"
 
-#define HCAD_VERSION "0027"
+#define HCAD_VERSION "0028"
 
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_AUTHOR("Christoph Raisch <raisch@de.ibm.com>");
@@ -506,6 +506,7 @@ static int ehca_init_device(struct ehca_shca *shca)
 	shca->ib_device.detach_mcast	    = ehca_detach_mcast;
 	shca->ib_device.process_mad	    = ehca_process_mad;
 	shca->ib_device.mmap		    = ehca_mmap;
+	shca->ib_device.dma_ops		    = &ehca_dma_mapping_ops;
 
 	if (EHCA_BMASK_GET(HCA_CAP_SRQ, shca->hca_cap)) {
 		shca->ib_device.uverbs_cmd_mask |=
@@ -1028,17 +1029,23 @@ static int __init ehca_module_init(void)
 		goto module_init1;
 	}
 
+	ret = ehca_create_busmap();
+	if (ret) {
+		ehca_gen_err("Cannot create busmap.");
+		goto module_init2;
+	}
+
 	ret = ibmebus_register_driver(&ehca_driver);
 	if (ret) {
 		ehca_gen_err("Cannot register eHCA device driver");
 		ret = -EINVAL;
-		goto module_init2;
+		goto module_init3;
 	}
 
 	ret = register_memory_notifier(&ehca_mem_nb);
 	if (ret) {
 		ehca_gen_err("Failed registering memory add/remove notifier");
-		goto module_init3;
+		goto module_init4;
 	}
 
 	if (ehca_poll_all_eqs != 1) {
@@ -1053,9 +1060,12 @@ static int __init ehca_module_init(void)
 
 	return 0;
 
-module_init3:
+module_init4:
 	ibmebus_unregister_driver(&ehca_driver);
 
+module_init3:
+	ehca_destroy_busmap();
+
 module_init2:
 	ehca_destroy_slab_caches();
 
@@ -1073,6 +1083,8 @@ static void __exit ehca_module_exit(void)
 
 	unregister_memory_notifier(&ehca_mem_nb);
 
+	ehca_destroy_busmap();
+
 	ehca_destroy_slab_caches();
 
 	ehca_destroy_comp_pool();
diff --git a/drivers/infiniband/hw/ehca/ehca_mrmw.c b/drivers/infiniband/hw/ehca/ehca_mrmw.c
index 72f83f7df61..7663a2a9f13 100644
--- a/drivers/infiniband/hw/ehca/ehca_mrmw.c
+++ b/drivers/infiniband/hw/ehca/ehca_mrmw.c
@@ -53,6 +53,38 @@
 /* max number of rpages (per hcall register_rpages) */
 #define MAX_RPAGES 512
 
+/* DMEM toleration management */
+#define EHCA_SECTSHIFT        SECTION_SIZE_BITS
+#define EHCA_SECTSIZE          (1UL << EHCA_SECTSHIFT)
+#define EHCA_HUGEPAGESHIFT     34
+#define EHCA_HUGEPAGE_SIZE     (1UL << EHCA_HUGEPAGESHIFT)
+#define EHCA_HUGEPAGE_PFN_MASK ((EHCA_HUGEPAGE_SIZE - 1) >> PAGE_SHIFT)
+#define EHCA_INVAL_ADDR        0xFFFFFFFFFFFFFFFFULL
+#define EHCA_DIR_INDEX_SHIFT 13                   /* 8k Entries in 64k block */
+#define EHCA_TOP_INDEX_SHIFT (EHCA_DIR_INDEX_SHIFT * 2)
+#define EHCA_MAP_ENTRIES (1 << EHCA_DIR_INDEX_SHIFT)
+#define EHCA_TOP_MAP_SIZE (0x10000)               /* currently fixed map size */
+#define EHCA_DIR_MAP_SIZE (0x10000)
+#define EHCA_ENT_MAP_SIZE (0x10000)
+#define EHCA_INDEX_MASK (EHCA_MAP_ENTRIES - 1)
+
+static unsigned long ehca_mr_len;
+
+/*
+ * Memory map data structures
+ */
+struct ehca_dir_bmap {
+	u64 ent[EHCA_MAP_ENTRIES];
+};
+struct ehca_top_bmap {
+	struct ehca_dir_bmap *dir[EHCA_MAP_ENTRIES];
+};
+struct ehca_bmap {
+	struct ehca_top_bmap *top[EHCA_MAP_ENTRIES];
+};
+
+static struct ehca_bmap *ehca_bmap;
+
 static struct kmem_cache *mr_cache;
 static struct kmem_cache *mw_cache;
 
@@ -68,6 +100,8 @@ enum ehca_mr_pgsize {
 #define EHCA_MR_PGSHIFT1M  20
 #define EHCA_MR_PGSHIFT16M 24
 
+static u64 ehca_map_vaddr(void *caddr);
+
 static u32 ehca_encode_hwpage_size(u32 pgsize)
 {
 	int log = ilog2(pgsize);
@@ -135,7 +169,8 @@ struct ib_mr *ehca_get_dma_mr(struct ib_pd *pd, int mr_access_flags)
 			goto get_dma_mr_exit0;
 		}
 
-		ret = ehca_reg_maxmr(shca, e_maxmr, (u64 *)KERNELBASE,
+		ret = ehca_reg_maxmr(shca, e_maxmr,
+				     (void *)ehca_map_vaddr((void *)KERNELBASE),
 				     mr_access_flags, e_pd,
 				     &e_maxmr->ib.ib_mr.lkey,
 				     &e_maxmr->ib.ib_mr.rkey);
@@ -251,7 +286,7 @@ struct ib_mr *ehca_reg_phys_mr(struct ib_pd *pd,
 
 		ret = ehca_reg_mr(shca, e_mr, iova_start, size, mr_access_flags,
 				  e_pd, &pginfo, &e_mr->ib.ib_mr.lkey,
-				  &e_mr->ib.ib_mr.rkey);
+				  &e_mr->ib.ib_mr.rkey, EHCA_REG_MR);
 		if (ret) {
 			ib_mr = ERR_PTR(ret);
 			goto reg_phys_mr_exit1;
@@ -370,7 +405,7 @@ reg_user_mr_fallback:
 
 	ret = ehca_reg_mr(shca, e_mr, (u64 *)virt, length, mr_access_flags,
 			  e_pd, &pginfo, &e_mr->ib.ib_mr.lkey,
-			  &e_mr->ib.ib_mr.rkey);
+			  &e_mr->ib.ib_mr.rkey, EHCA_REG_MR);
 	if (ret == -EINVAL && pginfo.hwpage_size > PAGE_SIZE) {
 		ehca_warn(pd->device, "failed to register mr "
 			  "with hwpage_size=%llx", hwpage_size);
@@ -794,7 +829,7 @@ struct ib_fmr *ehca_alloc_fmr(struct ib_pd *pd,
 	ret = ehca_reg_mr(shca, e_fmr, NULL,
 			  fmr_attr->max_pages * (1 << fmr_attr->page_shift),
 			  mr_access_flags, e_pd, &pginfo,
-			  &tmp_lkey, &tmp_rkey);
+			  &tmp_lkey, &tmp_rkey, EHCA_REG_MR);
 	if (ret) {
 		ib_fmr = ERR_PTR(ret);
 		goto alloc_fmr_exit1;
@@ -983,6 +1018,10 @@ free_fmr_exit0:
 
 /*----------------------------------------------------------------------*/
 
+static int ehca_reg_bmap_mr_rpages(struct ehca_shca *shca,
+				   struct ehca_mr *e_mr,
+				   struct ehca_mr_pginfo *pginfo);
+
 int ehca_reg_mr(struct ehca_shca *shca,
 		struct ehca_mr *e_mr,
 		u64 *iova_start,
@@ -991,7 +1030,8 @@ int ehca_reg_mr(struct ehca_shca *shca,
 		struct ehca_pd *e_pd,
 		struct ehca_mr_pginfo *pginfo,
 		u32 *lkey, /*OUT*/
-		u32 *rkey) /*OUT*/
+		u32 *rkey, /*OUT*/
+		enum ehca_reg_type reg_type)
 {
 	int ret;
 	u64 h_ret;
@@ -1015,7 +1055,13 @@ int ehca_reg_mr(struct ehca_shca *shca,
 
 	e_mr->ipz_mr_handle = hipzout.handle;
 
-	ret = ehca_reg_mr_rpages(shca, e_mr, pginfo);
+	if (reg_type == EHCA_REG_BUSMAP_MR)
+		ret = ehca_reg_bmap_mr_rpages(shca, e_mr, pginfo);
+	else if (reg_type == EHCA_REG_MR)
+		ret = ehca_reg_mr_rpages(shca, e_mr, pginfo);
+	else
+		ret = -EINVAL;
+
 	if (ret)
 		goto ehca_reg_mr_exit1;
 
@@ -1316,7 +1362,7 @@ int ehca_rereg_mr(struct ehca_shca *shca,
 		e_mr->fmr_map_cnt = save_mr.fmr_map_cnt;
 
 		ret = ehca_reg_mr(shca, e_mr, iova_start, size, acl,
-				  e_pd, pginfo, lkey, rkey);
+				  e_pd, pginfo, lkey, rkey, EHCA_REG_MR);
 		if (ret) {
 			u32 offset = (u64)(&e_mr->flags) - (u64)e_mr;
 			memcpy(&e_mr->flags, &(save_mr.flags),
@@ -1409,7 +1455,7 @@ int ehca_unmap_one_fmr(struct ehca_shca *shca,
 	ret = ehca_reg_mr(shca, e_fmr, NULL,
 			  (e_fmr->fmr_max_pages * e_fmr->fmr_page_size),
 			  e_fmr->acl, e_pd, &pginfo, &tmp_lkey,
-			  &tmp_rkey);
+			  &tmp_rkey, EHCA_REG_MR);
 	if (ret) {
 		u32 offset = (u64)(&e_fmr->flags) - (u64)e_fmr;
 		memcpy(&e_fmr->flags, &(save_mr.flags),
@@ -1478,6 +1524,90 @@ ehca_reg_smr_exit0:
 } /* end ehca_reg_smr() */
 
 /*----------------------------------------------------------------------*/
+static inline void *ehca_calc_sectbase(int top, int dir, int idx)
+{
+	unsigned long ret = idx;
+	ret |= dir << EHCA_DIR_INDEX_SHIFT;
+	ret |= top << EHCA_TOP_INDEX_SHIFT;
+	return abs_to_virt(ret << SECTION_SIZE_BITS);
+}
+
+#define ehca_bmap_valid(entry) \
+	((u64)entry != (u64)EHCA_INVAL_ADDR)
+
+static u64 ehca_reg_mr_section(int top, int dir, int idx, u64 *kpage,
+			       struct ehca_shca *shca, struct ehca_mr *mr,
+			       struct ehca_mr_pginfo *pginfo)
+{
+	u64 h_ret = 0;
+	unsigned long page = 0;
+	u64 rpage = virt_to_abs(kpage);
+	int page_count;
+
+	void *sectbase = ehca_calc_sectbase(top, dir, idx);
+	if ((unsigned long)sectbase & (pginfo->hwpage_size - 1)) {
+		ehca_err(&shca->ib_device, "reg_mr_section will probably fail:"
+					   "hwpage_size does not fit to "
+					   "section start address");
+	}
+	page_count = EHCA_SECTSIZE / pginfo->hwpage_size;
+
+	while (page < page_count) {
+		u64 rnum;
+		for (rnum = 0; (rnum < MAX_RPAGES) && (page < page_count);
+		     rnum++) {
+			void *pg = sectbase + ((page++) * pginfo->hwpage_size);
+			kpage[rnum] = virt_to_abs(pg);
+		}
+
+		h_ret = hipz_h_register_rpage_mr(shca->ipz_hca_handle, mr,
+			ehca_encode_hwpage_size(pginfo->hwpage_size),
+			0, rpage, rnum);
+
+		if ((h_ret != H_SUCCESS) && (h_ret != H_PAGE_REGISTERED)) {
+			ehca_err(&shca->ib_device, "register_rpage_mr failed");
+			return h_ret;
+		}
+	}
+	return h_ret;
+}
+
+static u64 ehca_reg_mr_sections(int top, int dir, u64 *kpage,
+				struct ehca_shca *shca, struct ehca_mr *mr,
+				struct ehca_mr_pginfo *pginfo)
+{
+	u64 hret = H_SUCCESS;
+	int idx;
+
+	for (idx = 0; idx < EHCA_MAP_ENTRIES; idx++) {
+		if (!ehca_bmap_valid(ehca_bmap->top[top]->dir[dir]->ent[idx]))
+			continue;
+
+		hret = ehca_reg_mr_section(top, dir, idx, kpage, shca, mr,
+					   pginfo);
+		if ((hret != H_SUCCESS) && (hret != H_PAGE_REGISTERED))
+				return hret;
+	}
+	return hret;
+}
+
+static u64 ehca_reg_mr_dir_sections(int top, u64 *kpage, struct ehca_shca *shca,
+				    struct ehca_mr *mr,
+				    struct ehca_mr_pginfo *pginfo)
+{
+	u64 hret = H_SUCCESS;
+	int dir;
+
+	for (dir = 0; dir < EHCA_MAP_ENTRIES; dir++) {
+		if (!ehca_bmap_valid(ehca_bmap->top[top]->dir[dir]))
+			continue;
+
+		hret = ehca_reg_mr_sections(top, dir, kpage, shca, mr, pginfo);
+		if ((hret != H_SUCCESS) && (hret != H_PAGE_REGISTERED))
+				return hret;
+	}
+	return hret;
+}
 
 /* register internal max-MR to internal SHCA */
 int ehca_reg_internal_maxmr(
@@ -1495,6 +1625,11 @@ int ehca_reg_internal_maxmr(
 	u32 num_hwpages;
 	u64 hw_pgsize;
 
+	if (!ehca_bmap) {
+		ret = -EFAULT;
+		goto ehca_reg_internal_maxmr_exit0;
+	}
+
 	e_mr = ehca_mr_new();
 	if (!e_mr) {
 		ehca_err(&shca->ib_device, "out of memory");
@@ -1504,8 +1639,8 @@ int ehca_reg_internal_maxmr(
 	e_mr->flags |= EHCA_MR_FLAG_MAXMR;
 
 	/* register internal max-MR on HCA */
-	size_maxmr = (u64)high_memory - PAGE_OFFSET;
-	iova_start = (u64 *)KERNELBASE;
+	size_maxmr = ehca_mr_len;
+	iova_start = (u64 *)ehca_map_vaddr((void *)KERNELBASE);
 	ib_pbuf.addr = 0;
 	ib_pbuf.size = size_maxmr;
 	num_kpages = NUM_CHUNKS(((u64)iova_start % PAGE_SIZE) + size_maxmr,
@@ -1524,7 +1659,7 @@ int ehca_reg_internal_maxmr(
 
 	ret = ehca_reg_mr(shca, e_mr, iova_start, size_maxmr, 0, e_pd,
 			  &pginfo, &e_mr->ib.ib_mr.lkey,
-			  &e_mr->ib.ib_mr.rkey);
+			  &e_mr->ib.ib_mr.rkey, EHCA_REG_BUSMAP_MR);
 	if (ret) {
 		ehca_err(&shca->ib_device, "reg of internal max MR failed, "
 			 "e_mr=%p iova_start=%p size_maxmr=%llx num_kpages=%x "
@@ -2077,8 +2212,8 @@ int ehca_mr_is_maxmr(u64 size,
 		     u64 *iova_start)
 {
 	/* a MR is treated as max-MR only if it fits following: */
-	if ((size == ((u64)high_memory - PAGE_OFFSET)) &&
-	    (iova_start == (void *)KERNELBASE)) {
+	if ((size == ehca_mr_len) &&
+	    (iova_start == (void *)ehca_map_vaddr((void *)KERNELBASE))) {
 		ehca_gen_dbg("this is a max-MR");
 		return 1;
 	} else
@@ -2184,3 +2319,350 @@ void ehca_cleanup_mrmw_cache(void)
 	if (mw_cache)
 		kmem_cache_destroy(mw_cache);
 }
+
+static inline int ehca_init_top_bmap(struct ehca_top_bmap *ehca_top_bmap,
+				     int dir)
+{
+	if (!ehca_bmap_valid(ehca_top_bmap->dir[dir])) {
+		ehca_top_bmap->dir[dir] =
+			kmalloc(sizeof(struct ehca_dir_bmap), GFP_KERNEL);
+		if (!ehca_top_bmap->dir[dir])
+			return -ENOMEM;
+		/* Set map block to 0xFF according to EHCA_INVAL_ADDR */
+		memset(ehca_top_bmap->dir[dir], 0xFF, EHCA_ENT_MAP_SIZE);
+	}
+	return 0;
+}
+
+static inline int ehca_init_bmap(struct ehca_bmap *ehca_bmap, int top, int dir)
+{
+	if (!ehca_bmap_valid(ehca_bmap->top[top])) {
+		ehca_bmap->top[top] =
+			kmalloc(sizeof(struct ehca_top_bmap), GFP_KERNEL);
+		if (!ehca_bmap->top[top])
+			return -ENOMEM;
+		/* Set map block to 0xFF according to EHCA_INVAL_ADDR */
+		memset(ehca_bmap->top[top], 0xFF, EHCA_DIR_MAP_SIZE);
+	}
+	return ehca_init_top_bmap(ehca_bmap->top[top], dir);
+}
+
+static inline int ehca_calc_index(unsigned long i, unsigned long s)
+{
+	return (i >> s) & EHCA_INDEX_MASK;
+}
+
+void ehca_destroy_busmap(void)
+{
+	int top, dir;
+
+	if (!ehca_bmap)
+		return;
+
+	for (top = 0; top < EHCA_MAP_ENTRIES; top++) {
+		if (!ehca_bmap_valid(ehca_bmap->top[top]))
+			continue;
+		for (dir = 0; dir < EHCA_MAP_ENTRIES; dir++) {
+			if (!ehca_bmap_valid(ehca_bmap->top[top]->dir[dir]))
+				continue;
+
+			kfree(ehca_bmap->top[top]->dir[dir]);
+		}
+
+		kfree(ehca_bmap->top[top]);
+	}
+
+	kfree(ehca_bmap);
+	ehca_bmap = NULL;
+}
+
+static int ehca_update_busmap(unsigned long pfn, unsigned long nr_pages)
+{
+	unsigned long i, start_section, end_section;
+	int top, dir, idx;
+
+	if (!nr_pages)
+		return 0;
+
+	if (!ehca_bmap) {
+		ehca_bmap = kmalloc(sizeof(struct ehca_bmap), GFP_KERNEL);
+		if (!ehca_bmap)
+			return -ENOMEM;
+		/* Set map block to 0xFF according to EHCA_INVAL_ADDR */
+		memset(ehca_bmap, 0xFF, EHCA_TOP_MAP_SIZE);
+	}
+
+	start_section = phys_to_abs(pfn * PAGE_SIZE) / EHCA_SECTSIZE;
+	end_section = phys_to_abs((pfn + nr_pages) * PAGE_SIZE) / EHCA_SECTSIZE;
+	for (i = start_section; i < end_section; i++) {
+		int ret;
+		top = ehca_calc_index(i, EHCA_TOP_INDEX_SHIFT);
+		dir = ehca_calc_index(i, EHCA_DIR_INDEX_SHIFT);
+		idx = i & EHCA_INDEX_MASK;
+
+		ret = ehca_init_bmap(ehca_bmap, top, dir);
+		if (ret) {
+			ehca_destroy_busmap();
+			return ret;
+		}
+		ehca_bmap->top[top]->dir[dir]->ent[idx] = ehca_mr_len;
+		ehca_mr_len += EHCA_SECTSIZE;
+	}
+	return 0;
+}
+
+static int ehca_is_hugepage(unsigned long pfn)
+{
+	int page_order;
+
+	if (pfn & EHCA_HUGEPAGE_PFN_MASK)
+		return 0;
+
+	page_order = compound_order(pfn_to_page(pfn));
+	if (page_order + PAGE_SHIFT != EHCA_HUGEPAGESHIFT)
+		return 0;
+
+	return 1;
+}
+
+static int ehca_create_busmap_callback(unsigned long initial_pfn,
+				       unsigned long total_nr_pages, void *arg)
+{
+	int ret;
+	unsigned long pfn, start_pfn, end_pfn, nr_pages;
+
+	if ((total_nr_pages * PAGE_SIZE) < EHCA_HUGEPAGE_SIZE)
+		return ehca_update_busmap(initial_pfn, total_nr_pages);
+
+	/* Given chunk is >= 16GB -> check for hugepages */
+	start_pfn = initial_pfn;
+	end_pfn = initial_pfn + total_nr_pages;
+	pfn = start_pfn;
+
+	while (pfn < end_pfn) {
+		if (ehca_is_hugepage(pfn)) {
+			/* Add mem found in front of the hugepage */
+			nr_pages = pfn - start_pfn;
+			ret = ehca_update_busmap(start_pfn, nr_pages);
+			if (ret)
+				return ret;
+			/* Skip the hugepage */
+			pfn += (EHCA_HUGEPAGE_SIZE / PAGE_SIZE);
+			start_pfn = pfn;
+		} else
+			pfn += (EHCA_SECTSIZE / PAGE_SIZE);
+	}
+
+	/* Add mem found behind the hugepage(s)  */
+	nr_pages = pfn - start_pfn;
+	return ehca_update_busmap(start_pfn, nr_pages);
+}
+
+int ehca_create_busmap(void)
+{
+	int ret;
+
+	ehca_mr_len = 0;
+	ret = walk_memory_resource(0, 1ULL << MAX_PHYSMEM_BITS, NULL,
+				   ehca_create_busmap_callback);
+	return ret;
+}
+
+static int ehca_reg_bmap_mr_rpages(struct ehca_shca *shca,
+				   struct ehca_mr *e_mr,
+				   struct ehca_mr_pginfo *pginfo)
+{
+	int top;
+	u64 hret, *kpage;
+
+	kpage = ehca_alloc_fw_ctrlblock(GFP_KERNEL);
+	if (!kpage) {
+		ehca_err(&shca->ib_device, "kpage alloc failed");
+		return -ENOMEM;
+	}
+	for (top = 0; top < EHCA_MAP_ENTRIES; top++) {
+		if (!ehca_bmap_valid(ehca_bmap->top[top]))
+			continue;
+		hret = ehca_reg_mr_dir_sections(top, kpage, shca, e_mr, pginfo);
+		if ((hret != H_PAGE_REGISTERED) && (hret != H_SUCCESS))
+			break;
+	}
+
+	ehca_free_fw_ctrlblock(kpage);
+
+	if (hret == H_SUCCESS)
+		return 0; /* Everything is fine */
+	else {
+		ehca_err(&shca->ib_device, "ehca_reg_bmap_mr_rpages failed, "
+				 "h_ret=%lli e_mr=%p top=%x lkey=%x "
+				 "hca_hndl=%llx mr_hndl=%llx", hret, e_mr, top,
+				 e_mr->ib.ib_mr.lkey,
+				 shca->ipz_hca_handle.handle,
+				 e_mr->ipz_mr_handle.handle);
+		return ehca2ib_return_code(hret);
+	}
+}
+
+static u64 ehca_map_vaddr(void *caddr)
+{
+	int top, dir, idx;
+	unsigned long abs_addr, offset;
+	u64 entry;
+
+	if (!ehca_bmap)
+		return EHCA_INVAL_ADDR;
+
+	abs_addr = virt_to_abs(caddr);
+	top = ehca_calc_index(abs_addr, EHCA_TOP_INDEX_SHIFT + EHCA_SECTSHIFT);
+	if (!ehca_bmap_valid(ehca_bmap->top[top]))
+		return EHCA_INVAL_ADDR;
+
+	dir = ehca_calc_index(abs_addr, EHCA_DIR_INDEX_SHIFT + EHCA_SECTSHIFT);
+	if (!ehca_bmap_valid(ehca_bmap->top[top]->dir[dir]))
+		return EHCA_INVAL_ADDR;
+
+	idx = ehca_calc_index(abs_addr, EHCA_SECTSHIFT);
+
+	entry = ehca_bmap->top[top]->dir[dir]->ent[idx];
+	if (ehca_bmap_valid(entry)) {
+		offset = (unsigned long)caddr & (EHCA_SECTSIZE - 1);
+		return entry | offset;
+	} else
+		return EHCA_INVAL_ADDR;
+}
+
+static int ehca_dma_mapping_error(struct ib_device *dev, u64 dma_addr)
+{
+	return dma_addr == EHCA_INVAL_ADDR;
+}
+
+static u64 ehca_dma_map_single(struct ib_device *dev, void *cpu_addr,
+			       size_t size, enum dma_data_direction direction)
+{
+	if (cpu_addr)
+		return ehca_map_vaddr(cpu_addr);
+	else
+		return EHCA_INVAL_ADDR;
+}
+
+static void ehca_dma_unmap_single(struct ib_device *dev, u64 addr, size_t size,
+				  enum dma_data_direction direction)
+{
+	/* This is only a stub; nothing to be done here */
+}
+
+static u64 ehca_dma_map_page(struct ib_device *dev, struct page *page,
+			     unsigned long offset, size_t size,
+			     enum dma_data_direction direction)
+{
+	u64 addr;
+
+	if (offset + size > PAGE_SIZE)
+		return EHCA_INVAL_ADDR;
+
+	addr = ehca_map_vaddr(page_address(page));
+	if (!ehca_dma_mapping_error(dev, addr))
+		addr += offset;
+
+	return addr;
+}
+
+static void ehca_dma_unmap_page(struct ib_device *dev, u64 addr, size_t size,
+				enum dma_data_direction direction)
+{
+	/* This is only a stub; nothing to be done here */
+}
+
+static int ehca_dma_map_sg(struct ib_device *dev, struct scatterlist *sgl,
+			   int nents, enum dma_data_direction direction)
+{
+	struct scatterlist *sg;
+	int i;
+
+	for_each_sg(sgl, sg, nents, i) {
+		u64 addr;
+		addr = ehca_map_vaddr(sg_virt(sg));
+		if (ehca_dma_mapping_error(dev, addr))
+			return 0;
+
+		sg->dma_address = addr;
+		sg->dma_length = sg->length;
+	}
+	return nents;
+}
+
+static void ehca_dma_unmap_sg(struct ib_device *dev, struct scatterlist *sg,
+			      int nents, enum dma_data_direction direction)
+{
+	/* This is only a stub; nothing to be done here */
+}
+
+static u64 ehca_dma_address(struct ib_device *dev, struct scatterlist *sg)
+{
+	return sg->dma_address;
+}
+
+static unsigned int ehca_dma_len(struct ib_device *dev, struct scatterlist *sg)
+{
+	return sg->length;
+}
+
+static void ehca_dma_sync_single_for_cpu(struct ib_device *dev, u64 addr,
+					 size_t size,
+					 enum dma_data_direction dir)
+{
+	dma_sync_single_for_cpu(dev->dma_device, addr, size, dir);
+}
+
+static void ehca_dma_sync_single_for_device(struct ib_device *dev, u64 addr,
+					    size_t size,
+					    enum dma_data_direction dir)
+{
+	dma_sync_single_for_device(dev->dma_device, addr, size, dir);
+}
+
+static void *ehca_dma_alloc_coherent(struct ib_device *dev, size_t size,
+				     u64 *dma_handle, gfp_t flag)
+{
+	struct page *p;
+	void *addr = NULL;
+	u64 dma_addr;
+
+	p = alloc_pages(flag, get_order(size));
+	if (p) {
+		addr = page_address(p);
+		dma_addr = ehca_map_vaddr(addr);
+		if (ehca_dma_mapping_error(dev, dma_addr)) {
+			free_pages((unsigned long)addr,	get_order(size));
+			return NULL;
+		}
+		if (dma_handle)
+			*dma_handle = dma_addr;
+		return addr;
+	}
+	return NULL;
+}
+
+static void ehca_dma_free_coherent(struct ib_device *dev, size_t size,
+				   void *cpu_addr, u64 dma_handle)
+{
+	if (cpu_addr && size)
+		free_pages((unsigned long)cpu_addr, get_order(size));
+}
+
+
+struct ib_dma_mapping_ops ehca_dma_mapping_ops = {
+	.mapping_error          = ehca_dma_mapping_error,
+	.map_single             = ehca_dma_map_single,
+	.unmap_single           = ehca_dma_unmap_single,
+	.map_page               = ehca_dma_map_page,
+	.unmap_page             = ehca_dma_unmap_page,
+	.map_sg                 = ehca_dma_map_sg,
+	.unmap_sg               = ehca_dma_unmap_sg,
+	.dma_address            = ehca_dma_address,
+	.dma_len                = ehca_dma_len,
+	.sync_single_for_cpu    = ehca_dma_sync_single_for_cpu,
+	.sync_single_for_device = ehca_dma_sync_single_for_device,
+	.alloc_coherent         = ehca_dma_alloc_coherent,
+	.free_coherent          = ehca_dma_free_coherent,
+};
diff --git a/drivers/infiniband/hw/ehca/ehca_mrmw.h b/drivers/infiniband/hw/ehca/ehca_mrmw.h
index bc8f4e31c12..50d8b51306d 100644
--- a/drivers/infiniband/hw/ehca/ehca_mrmw.h
+++ b/drivers/infiniband/hw/ehca/ehca_mrmw.h
@@ -42,6 +42,11 @@
 #ifndef _EHCA_MRMW_H_
 #define _EHCA_MRMW_H_
 
+enum ehca_reg_type {
+	EHCA_REG_MR,
+	EHCA_REG_BUSMAP_MR
+};
+
 int ehca_reg_mr(struct ehca_shca *shca,
 		struct ehca_mr *e_mr,
 		u64 *iova_start,
@@ -50,7 +55,8 @@ int ehca_reg_mr(struct ehca_shca *shca,
 		struct ehca_pd *e_pd,
 		struct ehca_mr_pginfo *pginfo,
 		u32 *lkey,
-		u32 *rkey);
+		u32 *rkey,
+		enum ehca_reg_type reg_type);
 
 int ehca_reg_mr_rpages(struct ehca_shca *shca,
 		       struct ehca_mr *e_mr,
@@ -118,4 +124,9 @@ void ehca_mrmw_reverse_map_acl(const u32 *hipz_acl,
 
 void ehca_mr_deletenew(struct ehca_mr *mr);
 
+int ehca_create_busmap(void);
+
+void ehca_destroy_busmap(void);
+
+extern struct ib_dma_mapping_ops ehca_dma_mapping_ops;
 #endif  /*_EHCA_MRMW_H_*/
diff --git a/drivers/infiniband/hw/mthca/mthca_mr.c b/drivers/infiniband/hw/mthca/mthca_mr.c
index d606edf1085..065b2089987 100644
--- a/drivers/infiniband/hw/mthca/mthca_mr.c
+++ b/drivers/infiniband/hw/mthca/mthca_mr.c
@@ -352,10 +352,14 @@ static void mthca_arbel_write_mtt_seg(struct mthca_dev *dev,
 
 	BUG_ON(!mtts);
 
+	dma_sync_single_for_cpu(&dev->pdev->dev, dma_handle,
+				list_len * sizeof (u64), DMA_TO_DEVICE);
+
 	for (i = 0; i < list_len; ++i)
 		mtts[i] = cpu_to_be64(buffer_list[i] | MTHCA_MTT_FLAG_PRESENT);
 
-	dma_sync_single(&dev->pdev->dev, dma_handle, list_len * sizeof (u64), DMA_TO_DEVICE);
+	dma_sync_single_for_device(&dev->pdev->dev, dma_handle,
+				   list_len * sizeof (u64), DMA_TO_DEVICE);
 }
 
 int mthca_write_mtt(struct mthca_dev *dev, struct mthca_mtt *mtt,
@@ -803,12 +807,15 @@ int mthca_arbel_map_phys_fmr(struct ib_fmr *ibfmr, u64 *page_list,
 
 	wmb();
 
+	dma_sync_single_for_cpu(&dev->pdev->dev, fmr->mem.arbel.dma_handle,
+				list_len * sizeof(u64), DMA_TO_DEVICE);
+
 	for (i = 0; i < list_len; ++i)
 		fmr->mem.arbel.mtts[i] = cpu_to_be64(page_list[i] |
 						     MTHCA_MTT_FLAG_PRESENT);
 
-	dma_sync_single(&dev->pdev->dev, fmr->mem.arbel.dma_handle,
-			list_len * sizeof(u64), DMA_TO_DEVICE);
+	dma_sync_single_for_device(&dev->pdev->dev, fmr->mem.arbel.dma_handle,
+				   list_len * sizeof(u64), DMA_TO_DEVICE);
 
 	fmr->mem.arbel.mpt->key    = cpu_to_be32(key);
 	fmr->mem.arbel.mpt->lkey   = cpu_to_be32(key);
diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index 11c7d664201..114b802771a 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -472,6 +472,7 @@ int schedule_nes_timer(struct nes_cm_node *cm_node, struct sk_buff *skb,
 
 static void nes_retrans_expired(struct nes_cm_node *cm_node)
 {
+	struct iw_cm_id *cm_id = cm_node->cm_id;
 	switch (cm_node->state) {
 	case NES_CM_STATE_SYN_RCVD:
 	case NES_CM_STATE_CLOSING:
@@ -479,7 +480,9 @@ static void nes_retrans_expired(struct nes_cm_node *cm_node)
 		break;
 	case NES_CM_STATE_LAST_ACK:
 	case NES_CM_STATE_FIN_WAIT1:
-	case NES_CM_STATE_MPAREJ_RCVD:
+		if (cm_node->cm_id)
+			cm_id->rem_ref(cm_id);
+		cm_node->state = NES_CM_STATE_CLOSED;
 		send_reset(cm_node, NULL);
 		break;
 	default:
@@ -1406,6 +1409,7 @@ static void handle_rst_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
 	case NES_CM_STATE_CLOSED:
 		drop_packet(skb);
 		break;
+	case NES_CM_STATE_FIN_WAIT1:
 	case NES_CM_STATE_LAST_ACK:
 		cm_node->cm_id->rem_ref(cm_node->cm_id);
 	case NES_CM_STATE_TIME_WAIT:
@@ -1413,8 +1417,6 @@ static void handle_rst_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
 		rem_ref_cm_node(cm_node->cm_core, cm_node);
 		drop_packet(skb);
 		break;
-	case NES_CM_STATE_FIN_WAIT1:
-		nes_debug(NES_DBG_CM, "Bad state %s[%u]\n", __func__, __LINE__);
 	default:
 		drop_packet(skb);
 		break;
diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index 64d5cfd8f38..21e0fd336cf 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -654,7 +654,7 @@ static int nes_query_device(struct ib_device *ibdev, struct ib_device_attr *prop
 		default:
 			props->max_qp_rd_atom = 0;
 	}
-	props->max_qp_init_rd_atom = props->max_qp_wr;
+	props->max_qp_init_rd_atom = props->max_qp_rd_atom;
 	props->atomic_cap = IB_ATOMIC_NONE;
 	props->max_map_per_fmr = 1;
 
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 7a7a026ba71..114efd8dc8f 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -25,7 +25,6 @@ struct evdev {
 	int exist;
 	int open;
 	int minor;
-	char name[16];
 	struct input_handle handle;
 	wait_queue_head_t wait;
 	struct evdev_client *grab;
@@ -609,7 +608,8 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 						    p, compat_mode);
 
 			if (_IOC_NR(cmd) == _IOC_NR(EVIOCGNAME(0)))
-				return str_to_user(dev->name, _IOC_SIZE(cmd), p);
+				return str_to_user(dev_name(&evdev->dev),
+						   _IOC_SIZE(cmd), p);
 
 			if (_IOC_NR(cmd) == _IOC_NR(EVIOCGPHYS(0)))
 				return str_to_user(dev->phys, _IOC_SIZE(cmd), p);
@@ -626,8 +626,11 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 				abs.maximum = dev->absmax[t];
 				abs.fuzz = dev->absfuzz[t];
 				abs.flat = dev->absflat[t];
+				abs.resolution = dev->absres[t];
 
-				if (copy_to_user(p, &abs, sizeof(struct input_absinfo)))
+				if (copy_to_user(p, &abs, min_t(size_t,
+								_IOC_SIZE(cmd),
+								sizeof(struct input_absinfo))))
 					return -EFAULT;
 
 				return 0;
@@ -654,8 +657,9 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 
 				t = _IOC_NR(cmd) & ABS_MAX;
 
-				if (copy_from_user(&abs, p,
-						sizeof(struct input_absinfo)))
+				if (copy_from_user(&abs, p, min_t(size_t,
+								  _IOC_SIZE(cmd),
+								  sizeof(struct input_absinfo))))
 					return -EFAULT;
 
 				/*
@@ -670,6 +674,8 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 				dev->absmax[t] = abs.maximum;
 				dev->absfuzz[t] = abs.fuzz;
 				dev->absflat[t] = abs.flat;
+				dev->absres[t] = _IOC_SIZE(cmd) < sizeof(struct input_absinfo) ?
+							0 : abs.resolution;
 
 				spin_unlock_irq(&dev->event_lock);
 
@@ -807,16 +813,15 @@ static int evdev_connect(struct input_handler *handler, struct input_dev *dev,
 	mutex_init(&evdev->mutex);
 	init_waitqueue_head(&evdev->wait);
 
-	snprintf(evdev->name, sizeof(evdev->name), "event%d", minor);
+	dev_set_name(&evdev->dev, "event%d", minor);
 	evdev->exist = 1;
 	evdev->minor = minor;
 
 	evdev->handle.dev = input_get_device(dev);
-	evdev->handle.name = evdev->name;
+	evdev->handle.name = dev_name(&evdev->dev);
 	evdev->handle.handler = handler;
 	evdev->handle.private = evdev;
 
-	dev_set_name(&evdev->dev, evdev->name);
 	evdev->dev.devt = MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + minor);
 	evdev->dev.class = &input_class;
 	evdev->dev.parent = &dev->dev;
diff --git a/drivers/input/gameport/fm801-gp.c b/drivers/input/gameport/fm801-gp.c
index 1dec00e20db..8a1810f88b9 100644
--- a/drivers/input/gameport/fm801-gp.c
+++ b/drivers/input/gameport/fm801-gp.c
@@ -167,5 +167,6 @@ module_exit(fm801_gp_exit);
 
 MODULE_DEVICE_TABLE(pci, fm801_gp_id_table);
 
+MODULE_DESCRIPTION("FM801 gameport driver");
 MODULE_AUTHOR("Takashi Iwai <tiwai@suse.de>");
 MODULE_LICENSE("GPL");
diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c
index 2d175b5928f..ac11be08585 100644
--- a/drivers/input/gameport/gameport.c
+++ b/drivers/input/gameport/gameport.c
@@ -30,16 +30,6 @@ MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
 MODULE_DESCRIPTION("Generic gameport layer");
 MODULE_LICENSE("GPL");
 
-EXPORT_SYMBOL(__gameport_register_port);
-EXPORT_SYMBOL(gameport_unregister_port);
-EXPORT_SYMBOL(__gameport_register_driver);
-EXPORT_SYMBOL(gameport_unregister_driver);
-EXPORT_SYMBOL(gameport_open);
-EXPORT_SYMBOL(gameport_close);
-EXPORT_SYMBOL(gameport_set_phys);
-EXPORT_SYMBOL(gameport_start_polling);
-EXPORT_SYMBOL(gameport_stop_polling);
-
 /*
  * gameport_mutex protects entire gameport subsystem and is taken
  * every time gameport port or driver registrered or unregistered.
@@ -162,6 +152,7 @@ void gameport_start_polling(struct gameport *gameport)
 
 	spin_unlock(&gameport->timer_lock);
 }
+EXPORT_SYMBOL(gameport_start_polling);
 
 void gameport_stop_polling(struct gameport *gameport)
 {
@@ -172,6 +163,7 @@ void gameport_stop_polling(struct gameport *gameport)
 
 	spin_unlock(&gameport->timer_lock);
 }
+EXPORT_SYMBOL(gameport_stop_polling);
 
 static void gameport_run_poll_handler(unsigned long d)
 {
@@ -516,6 +508,7 @@ void gameport_set_phys(struct gameport *gameport, const char *fmt, ...)
 	vsnprintf(gameport->phys, sizeof(gameport->phys), fmt, args);
 	va_end(args);
 }
+EXPORT_SYMBOL(gameport_set_phys);
 
 /*
  * Prepare gameport port for registration.
@@ -658,6 +651,7 @@ void __gameport_register_port(struct gameport *gameport, struct module *owner)
 	gameport_init_port(gameport);
 	gameport_queue_event(gameport, owner, GAMEPORT_REGISTER_PORT);
 }
+EXPORT_SYMBOL(__gameport_register_port);
 
 /*
  * Synchronously unregisters gameport port.
@@ -669,6 +663,7 @@ void gameport_unregister_port(struct gameport *gameport)
 	gameport_destroy_port(gameport);
 	mutex_unlock(&gameport_mutex);
 }
+EXPORT_SYMBOL(gameport_unregister_port);
 
 
 /*
@@ -728,7 +723,7 @@ int __gameport_register_driver(struct gameport_driver *drv, struct module *owner
 	 * Temporarily disable automatic binding because probing
 	 * takes long time and we are better off doing it in kgameportd
 	 */
-	drv->ignore = 1;
+	drv->ignore = true;
 
 	error = driver_register(&drv->driver);
 	if (error) {
@@ -741,7 +736,7 @@ int __gameport_register_driver(struct gameport_driver *drv, struct module *owner
 	/*
 	 * Reset ignore flag and let kgameportd bind the driver to free ports
 	 */
-	drv->ignore = 0;
+	drv->ignore = false;
 	error = gameport_queue_event(drv, NULL, GAMEPORT_ATTACH_DRIVER);
 	if (error) {
 		driver_unregister(&drv->driver);
@@ -750,6 +745,7 @@ int __gameport_register_driver(struct gameport_driver *drv, struct module *owner
 
 	return 0;
 }
+EXPORT_SYMBOL(__gameport_register_driver);
 
 void gameport_unregister_driver(struct gameport_driver *drv)
 {
@@ -757,7 +753,7 @@ void gameport_unregister_driver(struct gameport_driver *drv)
 
 	mutex_lock(&gameport_mutex);
 
-	drv->ignore = 1;	/* so gameport_find_driver ignores it */
+	drv->ignore = true;	/* so gameport_find_driver ignores it */
 	gameport_remove_pending_events(drv);
 
 start_over:
@@ -774,6 +770,7 @@ start_over:
 
 	mutex_unlock(&gameport_mutex);
 }
+EXPORT_SYMBOL(gameport_unregister_driver);
 
 static int gameport_bus_match(struct device *dev, struct device_driver *drv)
 {
@@ -812,6 +809,7 @@ int gameport_open(struct gameport *gameport, struct gameport_driver *drv, int mo
 	gameport_set_drv(gameport, drv);
 	return 0;
 }
+EXPORT_SYMBOL(gameport_open);
 
 void gameport_close(struct gameport *gameport)
 {
@@ -822,6 +820,7 @@ void gameport_close(struct gameport *gameport)
 	if (gameport->close)
 		gameport->close(gameport);
 }
+EXPORT_SYMBOL(gameport_close);
 
 static int __init gameport_init(void)
 {
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index 012a5e75399..0e12f89276a 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -39,7 +39,6 @@ struct joydev {
 	int exist;
 	int open;
 	int minor;
-	char name[16];
 	struct input_handle handle;
 	wait_queue_head_t wait;
 	struct list_head client_list;
@@ -537,12 +536,14 @@ static int joydev_ioctl_common(struct joydev *joydev,
 	default:
 		if ((cmd & ~IOCSIZE_MASK) == JSIOCGNAME(0)) {
 			int len;
-			if (!dev->name)
+			const char *name = dev_name(&dev->dev);
+
+			if (!name)
 				return 0;
-			len = strlen(dev->name) + 1;
+			len = strlen(name) + 1;
 			if (len > _IOC_SIZE(cmd))
 				len = _IOC_SIZE(cmd);
-			if (copy_to_user(argp, dev->name, len))
+			if (copy_to_user(argp, name, len))
 				return -EFAULT;
 			return len;
 		}
@@ -742,13 +743,13 @@ static int joydev_connect(struct input_handler *handler, struct input_dev *dev,
 	mutex_init(&joydev->mutex);
 	init_waitqueue_head(&joydev->wait);
 
-	snprintf(joydev->name, sizeof(joydev->name), "js%d", minor);
+	dev_set_name(&joydev->dev, "js%d", minor);
 	joydev->exist = 1;
 	joydev->minor = minor;
 
 	joydev->exist = 1;
 	joydev->handle.dev = input_get_device(dev);
-	joydev->handle.name = joydev->name;
+	joydev->handle.name = dev_name(&joydev->dev);
 	joydev->handle.handler = handler;
 	joydev->handle.private = joydev;
 
@@ -797,7 +798,6 @@ static int joydev_connect(struct input_handler *handler, struct input_dev *dev,
 		}
 	}
 
-	dev_set_name(&joydev->dev, joydev->name);
 	joydev->dev.devt = MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + minor);
 	joydev->dev.class = &input_class;
 	joydev->dev.parent = &dev->dev;
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index ea2638b4198..9d8f796c674 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -250,6 +250,17 @@ config KEYBOARD_HP7XX
 	  To compile this driver as a module, choose M here: the
 	  module will be called jornada720_kbd.
 
+config KEYBOARD_LM8323
+	tristate "LM8323 keypad chip"
+	depends on I2C
+	depends on LEDS_CLASS
+	help
+	  If you say yes here you get support for the National Semiconductor
+	  LM8323 keypad controller.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called lm8323.
+
 config KEYBOARD_OMAP
 	tristate "TI OMAP keypad support"
 	depends on (ARCH_OMAP1 || ARCH_OMAP2)
@@ -332,4 +343,14 @@ config KEYBOARD_SH_KEYSC
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called sh_keysc.
+
+config KEYBOARD_EP93XX
+	tristate "EP93xx Matrix Keypad support"
+	depends on ARCH_EP93XX
+	help
+	  Say Y here to enable the matrix keypad on the Cirrus EP93XX.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ep93xx_keypad.
+
 endif
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 36351e1190f..156b647a259 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_KEYBOARD_SPITZ)		+= spitzkbd.o
 obj-$(CONFIG_KEYBOARD_TOSA)		+= tosakbd.o
 obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
 obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
+obj-$(CONFIG_KEYBOARD_LM8323)		+= lm8323.o
 obj-$(CONFIG_KEYBOARD_OMAP)		+= omap-keypad.o
 obj-$(CONFIG_KEYBOARD_PXA27x)		+= pxa27x_keypad.o
 obj-$(CONFIG_KEYBOARD_PXA930_ROTARY)	+= pxa930_rotary.o
@@ -28,3 +29,4 @@ obj-$(CONFIG_KEYBOARD_HP7XX)		+= jornada720_kbd.o
 obj-$(CONFIG_KEYBOARD_MAPLE)		+= maple_keyb.o
 obj-$(CONFIG_KEYBOARD_BFIN)		+= bf54x-keys.o
 obj-$(CONFIG_KEYBOARD_SH_KEYSC)		+= sh_keysc.o
+obj-$(CONFIG_KEYBOARD_EP93XX)		+= ep93xx_keypad.o
diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c
new file mode 100644
index 00000000000..181d30e3018
--- /dev/null
+++ b/drivers/input/keyboard/ep93xx_keypad.c
@@ -0,0 +1,470 @@
+/*
+ * Driver for the Cirrus EP93xx matrix keypad controller.
+ *
+ * Copyright (c) 2008 H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * Based on the pxa27x matrix keypad controller by Rodolfo Giometti.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * NOTE:
+ *
+ * The 3-key reset is triggered by pressing the 3 keys in
+ * Row 0, Columns 2, 4, and 7 at the same time.  This action can
+ * be disabled by setting the EP93XX_KEYPAD_DISABLE_3_KEY flag.
+ *
+ * Normal operation for the matrix does not autorepeat the key press.
+ * This action can be enabled by setting the EP93XX_KEYPAD_AUTOREPEAT
+ * flag.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/clk.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/ep93xx_keypad.h>
+
+/*
+ * Keypad Interface Register offsets
+ */
+#define KEY_INIT		0x00	/* Key Scan Initialization register */
+#define KEY_DIAG		0x04	/* Key Scan Diagnostic register */
+#define KEY_REG			0x08	/* Key Value Capture register */
+
+/* Key Scan Initialization Register bit defines */
+#define KEY_INIT_DBNC_MASK	(0x00ff0000)
+#define KEY_INIT_DBNC_SHIFT	(16)
+#define KEY_INIT_DIS3KY		(1<<15)
+#define KEY_INIT_DIAG		(1<<14)
+#define KEY_INIT_BACK		(1<<13)
+#define KEY_INIT_T2		(1<<12)
+#define KEY_INIT_PRSCL_MASK	(0x000003ff)
+#define KEY_INIT_PRSCL_SHIFT	(0)
+
+/* Key Scan Diagnostic Register bit defines */
+#define KEY_DIAG_MASK		(0x0000003f)
+#define KEY_DIAG_SHIFT		(0)
+
+/* Key Value Capture Register bit defines */
+#define KEY_REG_K		(1<<15)
+#define KEY_REG_INT		(1<<14)
+#define KEY_REG_2KEYS		(1<<13)
+#define KEY_REG_1KEY		(1<<12)
+#define KEY_REG_KEY2_MASK	(0x00000fc0)
+#define KEY_REG_KEY2_SHIFT	(6)
+#define KEY_REG_KEY1_MASK	(0x0000003f)
+#define KEY_REG_KEY1_SHIFT	(0)
+
+#define keypad_readl(off)	__raw_readl(keypad->mmio_base + (off))
+#define keypad_writel(v, off)	__raw_writel((v), keypad->mmio_base + (off))
+
+#define MAX_MATRIX_KEY_NUM	(MAX_MATRIX_KEY_ROWS * MAX_MATRIX_KEY_COLS)
+
+struct ep93xx_keypad {
+	struct ep93xx_keypad_platform_data *pdata;
+
+	struct clk *clk;
+	struct input_dev *input_dev;
+	void __iomem *mmio_base;
+
+	int irq;
+	int enabled;
+
+	int key1;
+	int key2;
+
+	unsigned int matrix_keycodes[MAX_MATRIX_KEY_NUM];
+};
+
+static void ep93xx_keypad_build_keycode(struct ep93xx_keypad *keypad)
+{
+	struct ep93xx_keypad_platform_data *pdata = keypad->pdata;
+	struct input_dev *input_dev = keypad->input_dev;
+	int i;
+
+	for (i = 0; i < pdata->matrix_key_map_size; i++) {
+		unsigned int key = pdata->matrix_key_map[i];
+		int row = (key >> 28) & 0xf;
+		int col = (key >> 24) & 0xf;
+		int code = key & 0xffffff;
+
+		keypad->matrix_keycodes[(row << 3) + col] = code;
+		__set_bit(code, input_dev->keybit);
+	}
+}
+
+static irqreturn_t ep93xx_keypad_irq_handler(int irq, void *dev_id)
+{
+	struct ep93xx_keypad *keypad = dev_id;
+	struct input_dev *input_dev = keypad->input_dev;
+	unsigned int status = keypad_readl(KEY_REG);
+	int keycode, key1, key2;
+
+	keycode = (status & KEY_REG_KEY1_MASK) >> KEY_REG_KEY1_SHIFT;
+	key1 = keypad->matrix_keycodes[keycode];
+
+	keycode = (status & KEY_REG_KEY2_MASK) >> KEY_REG_KEY2_SHIFT;
+	key2 = keypad->matrix_keycodes[keycode];
+
+	if (status & KEY_REG_2KEYS) {
+		if (keypad->key1 && key1 != keypad->key1 && key2 != keypad->key1)
+			input_report_key(input_dev, keypad->key1, 0);
+
+		if (keypad->key2 && key1 != keypad->key2 && key2 != keypad->key2)
+			input_report_key(input_dev, keypad->key2, 0);
+
+		input_report_key(input_dev, key1, 1);
+		input_report_key(input_dev, key2, 1);
+
+		keypad->key1 = key1;
+		keypad->key2 = key2;
+
+	} else if (status & KEY_REG_1KEY) {
+		if (keypad->key1 && key1 != keypad->key1)
+			input_report_key(input_dev, keypad->key1, 0);
+
+		if (keypad->key2 && key1 != keypad->key2)
+			input_report_key(input_dev, keypad->key2, 0);
+
+		input_report_key(input_dev, key1, 1);
+
+		keypad->key1 = key1;
+		keypad->key2 = 0;
+
+	} else {
+		input_report_key(input_dev, keypad->key1, 0);
+		input_report_key(input_dev, keypad->key2, 0);
+
+		keypad->key1 = keypad->key2 = 0;
+	}
+	input_sync(input_dev);
+
+	return IRQ_HANDLED;
+}
+
+static void ep93xx_keypad_config(struct ep93xx_keypad *keypad)
+{
+	struct ep93xx_keypad_platform_data *pdata = keypad->pdata;
+	unsigned int val = 0;
+
+	clk_set_rate(keypad->clk, pdata->flags & EP93XX_KEYPAD_KDIV);
+
+	if (pdata->flags & EP93XX_KEYPAD_DISABLE_3_KEY)
+		val |= KEY_INIT_DIS3KY;
+	if (pdata->flags & EP93XX_KEYPAD_DIAG_MODE)
+		val |= KEY_INIT_DIAG;
+	if (pdata->flags & EP93XX_KEYPAD_BACK_DRIVE)
+		val |= KEY_INIT_BACK;
+	if (pdata->flags & EP93XX_KEYPAD_TEST_MODE)
+		val |= KEY_INIT_T2;
+
+	val |= ((pdata->debounce << KEY_INIT_DBNC_SHIFT) & KEY_INIT_DBNC_MASK);
+
+	val |= ((pdata->prescale << KEY_INIT_PRSCL_SHIFT) & KEY_INIT_PRSCL_MASK);
+
+	keypad_writel(val, KEY_INIT);
+}
+
+static int ep93xx_keypad_open(struct input_dev *pdev)
+{
+	struct ep93xx_keypad *keypad = input_get_drvdata(pdev);
+
+	if (!keypad->enabled) {
+		ep93xx_keypad_config(keypad);
+		clk_enable(keypad->clk);
+		keypad->enabled = 1;
+	}
+
+	return 0;
+}
+
+static void ep93xx_keypad_close(struct input_dev *pdev)
+{
+	struct ep93xx_keypad *keypad = input_get_drvdata(pdev);
+
+	if (keypad->enabled) {
+		clk_disable(keypad->clk);
+		keypad->enabled = 0;
+	}
+}
+
+
+#ifdef CONFIG_PM
+/*
+ * NOTE: I don't know if this is correct, or will work on the ep93xx.
+ *
+ * None of the existing ep93xx drivers have power management support.
+ * But, this is basically what the pxa27x_keypad driver does.
+ */
+static int ep93xx_keypad_suspend(struct platform_device *pdev,
+				 pm_message_t state)
+{
+	struct ep93xx_keypad *keypad = platform_get_drvdata(pdev);
+	struct input_dev *input_dev = keypad->input_dev;
+
+	mutex_lock(&input_dev->mutex);
+
+	if (keypad->enabled) {
+		clk_disable(keypad->clk);
+		keypad->enabled = 0;
+	}
+
+	mutex_unlock(&input_dev->mutex);
+
+	if (device_may_wakeup(&pdev->dev))
+		enable_irq_wake(keypad->irq);
+
+	return 0;
+}
+
+static int ep93xx_keypad_resume(struct platform_device *pdev)
+{
+	struct ep93xx_keypad *keypad = platform_get_drvdata(pdev);
+	struct input_dev *input_dev = keypad->input_dev;
+
+	if (device_may_wakeup(&pdev->dev))
+		disable_irq_wake(keypad->irq);
+
+	mutex_lock(&input_dev->mutex);
+
+	if (input_dev->users) {
+		if (!keypad->enabled) {
+			ep93xx_keypad_config(keypad);
+			clk_enable(keypad->clk);
+			keypad->enabled = 1;
+		}
+	}
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+#else	/* !CONFIG_PM */
+#define ep93xx_keypad_suspend	NULL
+#define ep93xx_keypad_resume	NULL
+#endif	/* !CONFIG_PM */
+
+static int __devinit ep93xx_keypad_probe(struct platform_device *pdev)
+{
+	struct ep93xx_keypad *keypad;
+	struct ep93xx_keypad_platform_data *pdata = pdev->dev.platform_data;
+	struct input_dev *input_dev;
+	struct resource *res;
+	int irq, err, i, gpio;
+
+	if (!pdata ||
+	    !pdata->matrix_key_rows ||
+	    pdata->matrix_key_rows > MAX_MATRIX_KEY_ROWS ||
+	    !pdata->matrix_key_cols ||
+	    pdata->matrix_key_cols > MAX_MATRIX_KEY_COLS) {
+		dev_err(&pdev->dev, "invalid or missing platform data\n");
+		return -EINVAL;
+	}
+
+	keypad = kzalloc(sizeof(struct ep93xx_keypad), GFP_KERNEL);
+	if (!keypad) {
+		dev_err(&pdev->dev, "failed to allocate driver data\n");
+		return -ENOMEM;
+	}
+
+	keypad->pdata = pdata;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "failed to get keypad irq\n");
+		err = -ENXIO;
+		goto failed_free;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get I/O memory\n");
+		err = -ENXIO;
+		goto failed_free;
+	}
+
+	res = request_mem_region(res->start, resource_size(res), pdev->name);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to request I/O memory\n");
+		err = -EBUSY;
+		goto failed_free;
+	}
+
+	keypad->mmio_base = ioremap(res->start, resource_size(res));
+	if (keypad->mmio_base == NULL) {
+		dev_err(&pdev->dev, "failed to remap I/O memory\n");
+		err = -ENXIO;
+		goto failed_free_mem;
+	}
+
+	/* Request the needed GPIO's */
+	gpio = EP93XX_GPIO_LINE_ROW0;
+	for (i = 0; i < keypad->pdata->matrix_key_rows; i++, gpio++) {
+		err = gpio_request(gpio, pdev->name);
+		if (err) {
+			dev_err(&pdev->dev, "failed to request gpio-%d\n",
+				gpio);
+			goto failed_free_rows;
+		}
+	}
+
+	gpio = EP93XX_GPIO_LINE_COL0;
+	for (i = 0; i < keypad->pdata->matrix_key_cols; i++, gpio++) {
+		err = gpio_request(gpio, pdev->name);
+		if (err) {
+			dev_err(&pdev->dev, "failed to request gpio-%d\n",
+				gpio);
+			goto failed_free_cols;
+		}
+	}
+
+	keypad->clk = clk_get(&pdev->dev, "key_clk");
+	if (IS_ERR(keypad->clk)) {
+		dev_err(&pdev->dev, "failed to get keypad clock\n");
+		err = PTR_ERR(keypad->clk);
+		goto failed_free_io;
+	}
+
+	/* Create and register the input driver */
+	input_dev = input_allocate_device();
+	if (!input_dev) {
+		dev_err(&pdev->dev, "failed to allocate input device\n");
+		err = -ENOMEM;
+		goto failed_put_clk;
+	}
+
+	keypad->input_dev = input_dev;
+
+	input_dev->name = pdev->name;
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->open = ep93xx_keypad_open;
+	input_dev->close = ep93xx_keypad_close;
+	input_dev->dev.parent = &pdev->dev;
+	input_dev->keycode = keypad->matrix_keycodes;
+	input_dev->keycodesize = sizeof(keypad->matrix_keycodes[0]);
+	input_dev->keycodemax = ARRAY_SIZE(keypad->matrix_keycodes);
+
+	input_set_drvdata(input_dev, keypad);
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY);
+	if (keypad->pdata->flags & EP93XX_KEYPAD_AUTOREPEAT)
+		input_dev->evbit[0] |= BIT_MASK(EV_REP);
+
+	ep93xx_keypad_build_keycode(keypad);
+	platform_set_drvdata(pdev, keypad);
+
+	err = request_irq(irq, ep93xx_keypad_irq_handler, IRQF_DISABLED,
+				pdev->name, keypad);
+	if (err) {
+		dev_err(&pdev->dev, "failed to request IRQ\n");
+		goto failed_free_dev;
+	}
+
+	keypad->irq = irq;
+
+	/* Register the input device */
+	err = input_register_device(input_dev);
+	if (err) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		goto failed_free_irq;
+	}
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	return 0;
+
+failed_free_irq:
+	free_irq(irq, pdev);
+	platform_set_drvdata(pdev, NULL);
+failed_free_dev:
+	input_free_device(input_dev);
+failed_put_clk:
+	clk_put(keypad->clk);
+failed_free_io:
+	i = keypad->pdata->matrix_key_cols - 1;
+	gpio = EP93XX_GPIO_LINE_COL0 + i;
+failed_free_cols:
+	for ( ; i >= 0; i--, gpio--)
+		gpio_free(gpio);
+	i = keypad->pdata->matrix_key_rows - 1;
+	gpio = EP93XX_GPIO_LINE_ROW0 + i;
+failed_free_rows:
+	for ( ; i >= 0; i--, gpio--)
+		gpio_free(gpio);
+	iounmap(keypad->mmio_base);
+failed_free_mem:
+	release_mem_region(res->start, resource_size(res));
+failed_free:
+	kfree(keypad);
+	return err;
+}
+
+static int __devexit ep93xx_keypad_remove(struct platform_device *pdev)
+{
+	struct ep93xx_keypad *keypad = platform_get_drvdata(pdev);
+	struct resource *res;
+	int i, gpio;
+
+	free_irq(keypad->irq, pdev);
+
+	platform_set_drvdata(pdev, NULL);
+
+	if (keypad->enabled)
+		clk_disable(keypad->clk);
+	clk_put(keypad->clk);
+
+	input_unregister_device(keypad->input_dev);
+
+	i = keypad->pdata->matrix_key_cols - 1;
+	gpio = EP93XX_GPIO_LINE_COL0 + i;
+	for ( ; i >= 0; i--, gpio--)
+		gpio_free(gpio);
+
+	i = keypad->pdata->matrix_key_rows - 1;
+	gpio = EP93XX_GPIO_LINE_ROW0 + i;
+	for ( ; i >= 0; i--, gpio--)
+		gpio_free(gpio);
+
+	iounmap(keypad->mmio_base);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
+
+	kfree(keypad);
+
+	return 0;
+}
+
+static struct platform_driver ep93xx_keypad_driver = {
+	.driver		= {
+		.name	= "ep93xx-keypad",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= ep93xx_keypad_probe,
+	.remove		= __devexit_p(ep93xx_keypad_remove),
+	.suspend	= ep93xx_keypad_suspend,
+	.resume		= ep93xx_keypad_resume,
+};
+
+static int __init ep93xx_keypad_init(void)
+{
+	return platform_driver_register(&ep93xx_keypad_driver);
+}
+
+static void __exit ep93xx_keypad_exit(void)
+{
+	platform_driver_unregister(&ep93xx_keypad_driver);
+}
+
+module_init(ep93xx_keypad_init);
+module_exit(ep93xx_keypad_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("H Hartley Sweeten <hsweeten@visionengravers.com>");
+MODULE_DESCRIPTION("EP93xx Matrix Keypad Controller");
+MODULE_ALIAS("platform:ep93xx-keypad");
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index ad67d763fdb..2157cd7de00 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -22,13 +22,14 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
+#include <linux/workqueue.h>
 
 #include <asm/gpio.h>
 
 struct gpio_button_data {
 	struct gpio_keys_button *button;
 	struct input_dev *input;
-	struct timer_list timer;
+	struct delayed_work work;
 };
 
 struct gpio_keys_drvdata {
@@ -36,8 +37,10 @@ struct gpio_keys_drvdata {
 	struct gpio_button_data data[0];
 };
 
-static void gpio_keys_report_event(struct gpio_button_data *bdata)
+static void gpio_keys_report_event(struct work_struct *work)
 {
+	struct gpio_button_data *bdata =
+		container_of(work, struct gpio_button_data, work.work);
 	struct gpio_keys_button *button = bdata->button;
 	struct input_dev *input = bdata->input;
 	unsigned int type = button->type ?: EV_KEY;
@@ -47,25 +50,17 @@ static void gpio_keys_report_event(struct gpio_button_data *bdata)
 	input_sync(input);
 }
 
-static void gpio_check_button(unsigned long _data)
-{
-	struct gpio_button_data *data = (struct gpio_button_data *)_data;
-
-	gpio_keys_report_event(data);
-}
-
 static irqreturn_t gpio_keys_isr(int irq, void *dev_id)
 {
 	struct gpio_button_data *bdata = dev_id;
 	struct gpio_keys_button *button = bdata->button;
+	unsigned long delay;
 
 	BUG_ON(irq != gpio_to_irq(button->gpio));
 
-	if (button->debounce_interval)
-		mod_timer(&bdata->timer,
-			jiffies + msecs_to_jiffies(button->debounce_interval));
-	else
-		gpio_keys_report_event(bdata);
+	delay = button->debounce_interval ?
+			msecs_to_jiffies(button->debounce_interval) : 0;
+	schedule_delayed_work(&bdata->work, delay);
 
 	return IRQ_HANDLED;
 }
@@ -112,8 +107,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 
 		bdata->input = input;
 		bdata->button = button;
-		setup_timer(&bdata->timer,
-			    gpio_check_button, (unsigned long)bdata);
+		INIT_DELAYED_WORK(&bdata->work, gpio_keys_report_event);
 
 		error = gpio_request(button->gpio, button->desc ?: "gpio_keys");
 		if (error < 0) {
@@ -142,8 +136,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 		}
 
 		error = request_irq(irq, gpio_keys_isr,
-				    IRQF_SAMPLE_RANDOM | IRQF_TRIGGER_RISING |
-					IRQF_TRIGGER_FALLING,
+				    IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 				    button->desc ? button->desc : "gpio_keys",
 				    bdata);
 		if (error) {
@@ -173,8 +166,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
  fail2:
 	while (--i >= 0) {
 		free_irq(gpio_to_irq(pdata->buttons[i].gpio), &ddata->data[i]);
-		if (pdata->buttons[i].debounce_interval)
-			del_timer_sync(&ddata->data[i].timer);
+		cancel_delayed_work_sync(&ddata->data[i].work);
 		gpio_free(pdata->buttons[i].gpio);
 	}
 
@@ -198,8 +190,7 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev)
 	for (i = 0; i < pdata->nbuttons; i++) {
 		int irq = gpio_to_irq(pdata->buttons[i].gpio);
 		free_irq(irq, &ddata->data[i]);
-		if (pdata->buttons[i].debounce_interval)
-			del_timer_sync(&ddata->data[i].timer);
+		cancel_delayed_work_sync(&ddata->data[i].work);
 		gpio_free(pdata->buttons[i].gpio);
 	}
 
diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c
new file mode 100644
index 00000000000..574eda2a495
--- /dev/null
+++ b/drivers/input/keyboard/lm8323.c
@@ -0,0 +1,878 @@
+/*
+ * drivers/i2c/chips/lm8323.c
+ *
+ * Copyright (C) 2007-2009 Nokia Corporation
+ *
+ * Written by Daniel Stone <daniel.stone@nokia.com>
+ *            Timo O. Karjalainen <timo.o.karjalainen@nokia.com>
+ *
+ * Updated by Felipe Balbi <felipe.balbi@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation (version 2 of the License only).
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <linux/i2c/lm8323.h>
+
+/* Commands to send to the chip. */
+#define LM8323_CMD_READ_ID		0x80 /* Read chip ID. */
+#define LM8323_CMD_WRITE_CFG		0x81 /* Set configuration item. */
+#define LM8323_CMD_READ_INT		0x82 /* Get interrupt status. */
+#define LM8323_CMD_RESET		0x83 /* Reset, same as external one */
+#define LM8323_CMD_WRITE_PORT_SEL	0x85 /* Set GPIO in/out. */
+#define LM8323_CMD_WRITE_PORT_STATE	0x86 /* Set GPIO pullup. */
+#define LM8323_CMD_READ_PORT_SEL	0x87 /* Get GPIO in/out. */
+#define LM8323_CMD_READ_PORT_STATE	0x88 /* Get GPIO pullup. */
+#define LM8323_CMD_READ_FIFO		0x89 /* Read byte from FIFO. */
+#define LM8323_CMD_RPT_READ_FIFO	0x8a /* Read FIFO (no increment). */
+#define LM8323_CMD_SET_ACTIVE		0x8b /* Set active time. */
+#define LM8323_CMD_READ_ERR		0x8c /* Get error status. */
+#define LM8323_CMD_READ_ROTATOR		0x8e /* Read rotator status. */
+#define LM8323_CMD_SET_DEBOUNCE		0x8f /* Set debouncing time. */
+#define LM8323_CMD_SET_KEY_SIZE		0x90 /* Set keypad size. */
+#define LM8323_CMD_READ_KEY_SIZE	0x91 /* Get keypad size. */
+#define LM8323_CMD_READ_CFG		0x92 /* Get configuration item. */
+#define LM8323_CMD_WRITE_CLOCK		0x93 /* Set clock config. */
+#define LM8323_CMD_READ_CLOCK		0x94 /* Get clock config. */
+#define LM8323_CMD_PWM_WRITE		0x95 /* Write PWM script. */
+#define LM8323_CMD_START_PWM		0x96 /* Start PWM engine. */
+#define LM8323_CMD_STOP_PWM		0x97 /* Stop PWM engine. */
+
+/* Interrupt status. */
+#define INT_KEYPAD			0x01 /* Key event. */
+#define INT_ROTATOR			0x02 /* Rotator event. */
+#define INT_ERROR			0x08 /* Error: use CMD_READ_ERR. */
+#define INT_NOINIT			0x10 /* Lost configuration. */
+#define INT_PWM1			0x20 /* PWM1 stopped. */
+#define INT_PWM2			0x40 /* PWM2 stopped. */
+#define INT_PWM3			0x80 /* PWM3 stopped. */
+
+/* Errors (signalled by INT_ERROR, read with CMD_READ_ERR). */
+#define ERR_BADPAR			0x01 /* Bad parameter. */
+#define ERR_CMDUNK			0x02 /* Unknown command. */
+#define ERR_KEYOVR			0x04 /* Too many keys pressed. */
+#define ERR_FIFOOVER			0x40 /* FIFO overflow. */
+
+/* Configuration keys (CMD_{WRITE,READ}_CFG). */
+#define CFG_MUX1SEL			0x01 /* Select MUX1_OUT input. */
+#define CFG_MUX1EN			0x02 /* Enable MUX1_OUT. */
+#define CFG_MUX2SEL			0x04 /* Select MUX2_OUT input. */
+#define CFG_MUX2EN			0x08 /* Enable MUX2_OUT. */
+#define CFG_PSIZE			0x20 /* Package size (must be 0). */
+#define CFG_ROTEN			0x40 /* Enable rotator. */
+
+/* Clock settings (CMD_{WRITE,READ}_CLOCK). */
+#define CLK_RCPWM_INTERNAL		0x00
+#define CLK_RCPWM_EXTERNAL		0x03
+#define CLK_SLOWCLKEN			0x08 /* Enable 32.768kHz clock. */
+#define CLK_SLOWCLKOUT			0x40 /* Enable slow pulse output. */
+
+/* The possible addresses corresponding to CONFIG1 and CONFIG2 pin wirings. */
+#define LM8323_I2C_ADDR00		(0x84 >> 1)	/* 1000 010x */
+#define LM8323_I2C_ADDR01		(0x86 >> 1)	/* 1000 011x */
+#define LM8323_I2C_ADDR10		(0x88 >> 1)	/* 1000 100x */
+#define LM8323_I2C_ADDR11		(0x8A >> 1)	/* 1000 101x */
+
+/* Key event fifo length */
+#define LM8323_FIFO_LEN			15
+
+/* Commands for PWM engine; feed in with PWM_WRITE. */
+/* Load ramp counter from duty cycle field (range 0 - 0xff). */
+#define PWM_SET(v)			(0x4000 | ((v) & 0xff))
+/* Go to start of script. */
+#define PWM_GOTOSTART			0x0000
+/*
+ * Stop engine (generates interrupt).  If reset is 1, clear the program
+ * counter, else leave it.
+ */
+#define PWM_END(reset)			(0xc000 | (!!(reset) << 11))
+/*
+ * Ramp.  If s is 1, divide clock by 512, else divide clock by 16.
+ * Take t clock scales (up to 63) per step, for n steps (up to 126).
+ * If u is set, ramp up, else ramp down.
+ */
+#define PWM_RAMP(s, t, n, u)		((!!(s) << 14) | ((t) & 0x3f) << 8 | \
+					 ((n) & 0x7f) | ((u) ? 0 : 0x80))
+/*
+ * Loop (i.e. jump back to pos) for a given number of iterations (up to 63).
+ * If cnt is zero, execute until PWM_END is encountered.
+ */
+#define PWM_LOOP(cnt, pos)		(0xa000 | (((cnt) & 0x3f) << 7) | \
+					 ((pos) & 0x3f))
+/*
+ * Wait for trigger.  Argument is a mask of channels, shifted by the channel
+ * number, e.g. 0xa for channels 3 and 1.  Note that channels are numbered
+ * from 1, not 0.
+ */
+#define PWM_WAIT_TRIG(chans)		(0xe000 | (((chans) & 0x7) << 6))
+/* Send trigger.  Argument is same as PWM_WAIT_TRIG. */
+#define PWM_SEND_TRIG(chans)		(0xe000 | ((chans) & 0x7))
+
+struct lm8323_pwm {
+	int			id;
+	int			fade_time;
+	int			brightness;
+	int			desired_brightness;
+	bool			enabled;
+	bool			running;
+	/* pwm lock */
+	struct mutex		lock;
+	struct work_struct	work;
+	struct led_classdev	cdev;
+	struct lm8323_chip	*chip;
+};
+
+struct lm8323_chip {
+	/* device lock */
+	struct mutex		lock;
+	struct i2c_client	*client;
+	struct work_struct	work;
+	struct input_dev	*idev;
+	bool			kp_enabled;
+	bool			pm_suspend;
+	unsigned		keys_down;
+	char			phys[32];
+	unsigned short		keymap[LM8323_KEYMAP_SIZE];
+	int			size_x;
+	int			size_y;
+	int			debounce_time;
+	int			active_time;
+	struct lm8323_pwm	pwm[LM8323_NUM_PWMS];
+};
+
+#define client_to_lm8323(c)	container_of(c, struct lm8323_chip, client)
+#define dev_to_lm8323(d)	container_of(d, struct lm8323_chip, client->dev)
+#define work_to_lm8323(w)	container_of(w, struct lm8323_chip, work)
+#define cdev_to_pwm(c)		container_of(c, struct lm8323_pwm, cdev)
+#define work_to_pwm(w)		container_of(w, struct lm8323_pwm, work)
+
+#define LM8323_MAX_DATA 8
+
+/*
+ * To write, we just access the chip's address in write mode, and dump the
+ * command and data out on the bus.  The command byte and data are taken as
+ * sequential u8s out of varargs, to a maximum of LM8323_MAX_DATA.
+ */
+static int lm8323_write(struct lm8323_chip *lm, int len, ...)
+{
+	int ret, i;
+	va_list ap;
+	u8 data[LM8323_MAX_DATA];
+
+	va_start(ap, len);
+
+	if (unlikely(len > LM8323_MAX_DATA)) {
+		dev_err(&lm->client->dev, "tried to send %d bytes\n", len);
+		va_end(ap);
+		return 0;
+	}
+
+	for (i = 0; i < len; i++)
+		data[i] = va_arg(ap, int);
+
+	va_end(ap);
+
+	/*
+	 * If the host is asleep while we send the data, we can get a NACK
+	 * back while it wakes up, so try again, once.
+	 */
+	ret = i2c_master_send(lm->client, data, len);
+	if (unlikely(ret == -EREMOTEIO))
+		ret = i2c_master_send(lm->client, data, len);
+	if (unlikely(ret != len))
+		dev_err(&lm->client->dev, "sent %d bytes of %d total\n",
+			len, ret);
+
+	return ret;
+}
+
+/*
+ * To read, we first send the command byte to the chip and end the transaction,
+ * then access the chip in read mode, at which point it will send the data.
+ */
+static int lm8323_read(struct lm8323_chip *lm, u8 cmd, u8 *buf, int len)
+{
+	int ret;
+
+	/*
+	 * If the host is asleep while we send the byte, we can get a NACK
+	 * back while it wakes up, so try again, once.
+	 */
+	ret = i2c_master_send(lm->client, &cmd, 1);
+	if (unlikely(ret == -EREMOTEIO))
+		ret = i2c_master_send(lm->client, &cmd, 1);
+	if (unlikely(ret != 1)) {
+		dev_err(&lm->client->dev, "sending read cmd 0x%02x failed\n",
+			cmd);
+		return 0;
+	}
+
+	ret = i2c_master_recv(lm->client, buf, len);
+	if (unlikely(ret != len))
+		dev_err(&lm->client->dev, "wanted %d bytes, got %d\n",
+			len, ret);
+
+	return ret;
+}
+
+/*
+ * Set the chip active time (idle time before it enters halt).
+ */
+static void lm8323_set_active_time(struct lm8323_chip *lm, int time)
+{
+	lm8323_write(lm, 2, LM8323_CMD_SET_ACTIVE, time >> 2);
+}
+
+/*
+ * The signals are AT-style: the low 7 bits are the keycode, and the top
+ * bit indicates the state (1 for down, 0 for up).
+ */
+static inline u8 lm8323_whichkey(u8 event)
+{
+	return event & 0x7f;
+}
+
+static inline int lm8323_ispress(u8 event)
+{
+	return (event & 0x80) ? 1 : 0;
+}
+
+static void process_keys(struct lm8323_chip *lm)
+{
+	u8 event;
+	u8 key_fifo[LM8323_FIFO_LEN + 1];
+	int old_keys_down = lm->keys_down;
+	int ret;
+	int i = 0;
+
+	/*
+	 * Read all key events from the FIFO at once. Next READ_FIFO clears the
+	 * FIFO even if we didn't read all events previously.
+	 */
+	ret = lm8323_read(lm, LM8323_CMD_READ_FIFO, key_fifo, LM8323_FIFO_LEN);
+
+	if (ret < 0) {
+		dev_err(&lm->client->dev, "Failed reading fifo \n");
+		return;
+	}
+	key_fifo[ret] = 0;
+
+	while ((event = key_fifo[i++])) {
+		u8 key = lm8323_whichkey(event);
+		int isdown = lm8323_ispress(event);
+		unsigned short keycode = lm->keymap[key];
+
+		dev_vdbg(&lm->client->dev, "key 0x%02x %s\n",
+			 key, isdown ? "down" : "up");
+
+		if (lm->kp_enabled) {
+			input_event(lm->idev, EV_MSC, MSC_SCAN, key);
+			input_report_key(lm->idev, keycode, isdown);
+			input_sync(lm->idev);
+		}
+
+		if (isdown)
+			lm->keys_down++;
+		else
+			lm->keys_down--;
+	}
+
+	/*
+	 * Errata: We need to ensure that the chip never enters halt mode
+	 * during a keypress, so set active time to 0.  When it's released,
+	 * we can enter halt again, so set the active time back to normal.
+	 */
+	if (!old_keys_down && lm->keys_down)
+		lm8323_set_active_time(lm, 0);
+	if (old_keys_down && !lm->keys_down)
+		lm8323_set_active_time(lm, lm->active_time);
+}
+
+static void lm8323_process_error(struct lm8323_chip *lm)
+{
+	u8 error;
+
+	if (lm8323_read(lm, LM8323_CMD_READ_ERR, &error, 1) == 1) {
+		if (error & ERR_FIFOOVER)
+			dev_vdbg(&lm->client->dev, "fifo overflow!\n");
+		if (error & ERR_KEYOVR)
+			dev_vdbg(&lm->client->dev,
+					"more than two keys pressed\n");
+		if (error & ERR_CMDUNK)
+			dev_vdbg(&lm->client->dev,
+					"unknown command submitted\n");
+		if (error & ERR_BADPAR)
+			dev_vdbg(&lm->client->dev, "bad command parameter\n");
+	}
+}
+
+static void lm8323_reset(struct lm8323_chip *lm)
+{
+	/* The docs say we must pass 0xAA as the data byte. */
+	lm8323_write(lm, 2, LM8323_CMD_RESET, 0xAA);
+}
+
+static int lm8323_configure(struct lm8323_chip *lm)
+{
+	int keysize = (lm->size_x << 4) | lm->size_y;
+	int clock = (CLK_SLOWCLKEN | CLK_RCPWM_EXTERNAL);
+	int debounce = lm->debounce_time >> 2;
+	int active = lm->active_time >> 2;
+
+	/*
+	 * Active time must be greater than the debounce time: if it's
+	 * a close-run thing, give ourselves a 12ms buffer.
+	 */
+	if (debounce >= active)
+		active = debounce + 3;
+
+	lm8323_write(lm, 2, LM8323_CMD_WRITE_CFG, 0);
+	lm8323_write(lm, 2, LM8323_CMD_WRITE_CLOCK, clock);
+	lm8323_write(lm, 2, LM8323_CMD_SET_KEY_SIZE, keysize);
+	lm8323_set_active_time(lm, lm->active_time);
+	lm8323_write(lm, 2, LM8323_CMD_SET_DEBOUNCE, debounce);
+	lm8323_write(lm, 3, LM8323_CMD_WRITE_PORT_STATE, 0xff, 0xff);
+	lm8323_write(lm, 3, LM8323_CMD_WRITE_PORT_SEL, 0, 0);
+
+	/*
+	 * Not much we can do about errors at this point, so just hope
+	 * for the best.
+	 */
+
+	return 0;
+}
+
+static void pwm_done(struct lm8323_pwm *pwm)
+{
+	mutex_lock(&pwm->lock);
+	pwm->running = false;
+	if (pwm->desired_brightness != pwm->brightness)
+		schedule_work(&pwm->work);
+	mutex_unlock(&pwm->lock);
+}
+
+/*
+ * Bottom half: handle the interrupt by posting key events, or dealing with
+ * errors appropriately.
+ */
+static void lm8323_work(struct work_struct *work)
+{
+	struct lm8323_chip *lm = work_to_lm8323(work);
+	u8 ints;
+	int i;
+
+	mutex_lock(&lm->lock);
+
+	while ((lm8323_read(lm, LM8323_CMD_READ_INT, &ints, 1) == 1) && ints) {
+		if (likely(ints & INT_KEYPAD))
+			process_keys(lm);
+		if (ints & INT_ROTATOR) {
+			/* We don't currently support the rotator. */
+			dev_vdbg(&lm->client->dev, "rotator fired\n");
+		}
+		if (ints & INT_ERROR) {
+			dev_vdbg(&lm->client->dev, "error!\n");
+			lm8323_process_error(lm);
+		}
+		if (ints & INT_NOINIT) {
+			dev_err(&lm->client->dev, "chip lost config; "
+						  "reinitialising\n");
+			lm8323_configure(lm);
+		}
+		for (i = 0; i < LM8323_NUM_PWMS; i++) {
+			if (ints & (1 << (INT_PWM1 + i))) {
+				dev_vdbg(&lm->client->dev,
+					 "pwm%d engine completed\n", i);
+				pwm_done(&lm->pwm[i]);
+			}
+		}
+	}
+
+	mutex_unlock(&lm->lock);
+}
+
+/*
+ * We cannot use I2C in interrupt context, so we just schedule work.
+ */
+static irqreturn_t lm8323_irq(int irq, void *data)
+{
+	struct lm8323_chip *lm = data;
+
+	schedule_work(&lm->work);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Read the chip ID.
+ */
+static int lm8323_read_id(struct lm8323_chip *lm, u8 *buf)
+{
+	int bytes;
+
+	bytes = lm8323_read(lm, LM8323_CMD_READ_ID, buf, 2);
+	if (unlikely(bytes != 2))
+		return -EIO;
+
+	return 0;
+}
+
+static void lm8323_write_pwm_one(struct lm8323_pwm *pwm, int pos, u16 cmd)
+{
+	lm8323_write(pwm->chip, 4, LM8323_CMD_PWM_WRITE, (pos << 2) | pwm->id,
+		     (cmd & 0xff00) >> 8, cmd & 0x00ff);
+}
+
+/*
+ * Write a script into a given PWM engine, concluding with PWM_END.
+ * If 'kill' is nonzero, the engine will be shut down at the end
+ * of the script, producing a zero output. Otherwise the engine
+ * will be kept running at the final PWM level indefinitely.
+ */
+static void lm8323_write_pwm(struct lm8323_pwm *pwm, int kill,
+			     int len, const u16 *cmds)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		lm8323_write_pwm_one(pwm, i, cmds[i]);
+
+	lm8323_write_pwm_one(pwm, i++, PWM_END(kill));
+	lm8323_write(pwm->chip, 2, LM8323_CMD_START_PWM, pwm->id);
+	pwm->running = true;
+}
+
+static void lm8323_pwm_work(struct work_struct *work)
+{
+	struct lm8323_pwm *pwm = work_to_pwm(work);
+	int div512, perstep, steps, hz, up, kill;
+	u16 pwm_cmds[3];
+	int num_cmds = 0;
+
+	mutex_lock(&pwm->lock);
+
+	/*
+	 * Do nothing if we're already at the requested level,
+	 * or previous setting is not yet complete. In the latter
+	 * case we will be called again when the previous PWM script
+	 * finishes.
+	 */
+	if (pwm->running || pwm->desired_brightness == pwm->brightness)
+		goto out;
+
+	kill = (pwm->desired_brightness == 0);
+	up = (pwm->desired_brightness > pwm->brightness);
+	steps = abs(pwm->desired_brightness - pwm->brightness);
+
+	/*
+	 * Convert time (in ms) into a divisor (512 or 16 on a refclk of
+	 * 32768Hz), and number of ticks per step.
+	 */
+	if ((pwm->fade_time / steps) > (32768 / 512)) {
+		div512 = 1;
+		hz = 32768 / 512;
+	} else {
+		div512 = 0;
+		hz = 32768 / 16;
+	}
+
+	perstep = (hz * pwm->fade_time) / (steps * 1000);
+
+	if (perstep == 0)
+		perstep = 1;
+	else if (perstep > 63)
+		perstep = 63;
+
+	while (steps) {
+		int s;
+
+		s = min(126, steps);
+		pwm_cmds[num_cmds++] = PWM_RAMP(div512, perstep, s, up);
+		steps -= s;
+	}
+
+	lm8323_write_pwm(pwm, kill, num_cmds, pwm_cmds);
+	pwm->brightness = pwm->desired_brightness;
+
+ out:
+	mutex_unlock(&pwm->lock);
+}
+
+static void lm8323_pwm_set_brightness(struct led_classdev *led_cdev,
+				      enum led_brightness brightness)
+{
+	struct lm8323_pwm *pwm = cdev_to_pwm(led_cdev);
+	struct lm8323_chip *lm = pwm->chip;
+
+	mutex_lock(&pwm->lock);
+	pwm->desired_brightness = brightness;
+	mutex_unlock(&pwm->lock);
+
+	if (in_interrupt()) {
+		schedule_work(&pwm->work);
+	} else {
+		/*
+		 * Schedule PWM work as usual unless we are going into suspend
+		 */
+		mutex_lock(&lm->lock);
+		if (likely(!lm->pm_suspend))
+			schedule_work(&pwm->work);
+		else
+			lm8323_pwm_work(&pwm->work);
+		mutex_unlock(&lm->lock);
+	}
+}
+
+static ssize_t lm8323_pwm_show_time(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct lm8323_pwm *pwm = cdev_to_pwm(led_cdev);
+
+	return sprintf(buf, "%d\n", pwm->fade_time);
+}
+
+static ssize_t lm8323_pwm_store_time(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct lm8323_pwm *pwm = cdev_to_pwm(led_cdev);
+	int ret;
+	unsigned long time;
+
+	ret = strict_strtoul(buf, 10, &time);
+	/* Numbers only, please. */
+	if (ret)
+		return -EINVAL;
+
+	pwm->fade_time = time;
+
+	return strlen(buf);
+}
+static DEVICE_ATTR(time, 0644, lm8323_pwm_show_time, lm8323_pwm_store_time);
+
+static int init_pwm(struct lm8323_chip *lm, int id, struct device *dev,
+		    const char *name)
+{
+	struct lm8323_pwm *pwm;
+
+	BUG_ON(id > 3);
+
+	pwm = &lm->pwm[id - 1];
+
+	pwm->id = id;
+	pwm->fade_time = 0;
+	pwm->brightness = 0;
+	pwm->desired_brightness = 0;
+	pwm->running = false;
+	pwm->enabled = false;
+	INIT_WORK(&pwm->work, lm8323_pwm_work);
+	mutex_init(&pwm->lock);
+	pwm->chip = lm;
+
+	if (name) {
+		pwm->cdev.name = name;
+		pwm->cdev.brightness_set = lm8323_pwm_set_brightness;
+		if (led_classdev_register(dev, &pwm->cdev) < 0) {
+			dev_err(dev, "couldn't register PWM %d\n", id);
+			return -1;
+		}
+		if (device_create_file(pwm->cdev.dev,
+					&dev_attr_time) < 0) {
+			dev_err(dev, "couldn't register time attribute\n");
+			led_classdev_unregister(&pwm->cdev);
+			return -1;
+		}
+		pwm->enabled = true;
+	}
+
+	return 0;
+}
+
+static struct i2c_driver lm8323_i2c_driver;
+
+static ssize_t lm8323_show_disable(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct lm8323_chip *lm = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", !lm->kp_enabled);
+}
+
+static ssize_t lm8323_set_disable(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	struct lm8323_chip *lm = dev_get_drvdata(dev);
+	int ret;
+	unsigned long i;
+
+	ret = strict_strtoul(buf, 10, &i);
+
+	mutex_lock(&lm->lock);
+	lm->kp_enabled = !i;
+	mutex_unlock(&lm->lock);
+
+	return count;
+}
+static DEVICE_ATTR(disable_kp, 0644, lm8323_show_disable, lm8323_set_disable);
+
+static int __devinit lm8323_probe(struct i2c_client *client,
+				  const struct i2c_device_id *id)
+{
+	struct lm8323_platform_data *pdata = client->dev.platform_data;
+	struct input_dev *idev;
+	struct lm8323_chip *lm;
+	int i, err;
+	unsigned long tmo;
+	u8 data[2];
+
+	if (!pdata || !pdata->size_x || !pdata->size_y) {
+		dev_err(&client->dev, "missing platform_data\n");
+		return -EINVAL;
+	}
+
+	if (pdata->size_x > 8) {
+		dev_err(&client->dev, "invalid x size %d specified\n",
+			pdata->size_x);
+		return -EINVAL;
+	}
+
+	if (pdata->size_y > 12) {
+		dev_err(&client->dev, "invalid y size %d specified\n",
+			pdata->size_y);
+		return -EINVAL;
+	}
+
+	lm = kzalloc(sizeof *lm, GFP_KERNEL);
+	idev = input_allocate_device();
+	if (!lm || !idev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	i2c_set_clientdata(client, lm);
+
+	lm->client = client;
+	lm->idev = idev;
+	mutex_init(&lm->lock);
+	INIT_WORK(&lm->work, lm8323_work);
+
+	lm->size_x = pdata->size_x;
+	lm->size_y = pdata->size_y;
+	dev_vdbg(&client->dev, "Keypad size: %d x %d\n",
+		 lm->size_x, lm->size_y);
+
+	lm->debounce_time = pdata->debounce_time;
+	lm->active_time = pdata->active_time;
+
+	lm8323_reset(lm);
+
+	/* Nothing's set up to service the IRQ yet, so just spin for max.
+	 * 100ms until we can configure. */
+	tmo = jiffies + msecs_to_jiffies(100);
+	while (lm8323_read(lm, LM8323_CMD_READ_INT, data, 1) == 1) {
+		if (data[0] & INT_NOINIT)
+			break;
+
+		if (time_after(jiffies, tmo)) {
+			dev_err(&client->dev,
+				"timeout waiting for initialisation\n");
+			break;
+		}
+
+		msleep(1);
+	}
+
+	lm8323_configure(lm);
+
+	/* If a true probe check the device */
+	if (lm8323_read_id(lm, data) != 0) {
+		dev_err(&client->dev, "device not found\n");
+		err = -ENODEV;
+		goto fail1;
+	}
+
+	for (i = 0; i < LM8323_NUM_PWMS; i++) {
+		err = init_pwm(lm, i + 1, &client->dev, pdata->pwm_names[i]);
+		if (err < 0)
+			goto fail2;
+	}
+
+	lm->kp_enabled = true;
+	err = device_create_file(&client->dev, &dev_attr_disable_kp);
+	if (err < 0)
+		goto fail2;
+
+	idev->name = pdata->name ? : "LM8323 keypad";
+	snprintf(lm->phys, sizeof(lm->phys),
+		 "%s/input-kp", dev_name(&client->dev));
+	idev->phys = lm->phys;
+
+	idev->evbit[0] = BIT(EV_KEY) | BIT(EV_MSC);
+	__set_bit(MSC_SCAN, idev->mscbit);
+	for (i = 0; i < LM8323_KEYMAP_SIZE; i++) {
+		__set_bit(pdata->keymap[i], idev->keybit);
+		lm->keymap[i] = pdata->keymap[i];
+	}
+	__clear_bit(KEY_RESERVED, idev->keybit);
+
+	if (pdata->repeat)
+		__set_bit(EV_REP, idev->evbit);
+
+	err = input_register_device(idev);
+	if (err) {
+		dev_dbg(&client->dev, "error registering input device\n");
+		goto fail3;
+	}
+
+	err = request_irq(client->irq, lm8323_irq,
+			  IRQF_TRIGGER_FALLING | IRQF_DISABLED,
+			  "lm8323", lm);
+	if (err) {
+		dev_err(&client->dev, "could not get IRQ %d\n", client->irq);
+		goto fail4;
+	}
+
+	device_init_wakeup(&client->dev, 1);
+	enable_irq_wake(client->irq);
+
+	return 0;
+
+fail4:
+	input_unregister_device(idev);
+	idev = NULL;
+fail3:
+	device_remove_file(&client->dev, &dev_attr_disable_kp);
+fail2:
+	while (--i >= 0)
+		if (lm->pwm[i].enabled)
+			led_classdev_unregister(&lm->pwm[i].cdev);
+fail1:
+	input_free_device(idev);
+	kfree(lm);
+	return err;
+}
+
+static int __devexit lm8323_remove(struct i2c_client *client)
+{
+	struct lm8323_chip *lm = i2c_get_clientdata(client);
+	int i;
+
+	disable_irq_wake(client->irq);
+	free_irq(client->irq, lm);
+	cancel_work_sync(&lm->work);
+
+	input_unregister_device(lm->idev);
+
+	device_remove_file(&lm->client->dev, &dev_attr_disable_kp);
+
+	for (i = 0; i < 3; i++)
+		if (lm->pwm[i].enabled)
+			led_classdev_unregister(&lm->pwm[i].cdev);
+
+	kfree(lm);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+/*
+ * We don't need to explicitly suspend the chip, as it already switches off
+ * when there's no activity.
+ */
+static int lm8323_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+	struct lm8323_chip *lm = i2c_get_clientdata(client);
+	int i;
+
+	set_irq_wake(client->irq, 0);
+	disable_irq(client->irq);
+
+	mutex_lock(&lm->lock);
+	lm->pm_suspend = true;
+	mutex_unlock(&lm->lock);
+
+	for (i = 0; i < 3; i++)
+		if (lm->pwm[i].enabled)
+			led_classdev_suspend(&lm->pwm[i].cdev);
+
+	return 0;
+}
+
+static int lm8323_resume(struct i2c_client *client)
+{
+	struct lm8323_chip *lm = i2c_get_clientdata(client);
+	int i;
+
+	mutex_lock(&lm->lock);
+	lm->pm_suspend = false;
+	mutex_unlock(&lm->lock);
+
+	for (i = 0; i < 3; i++)
+		if (lm->pwm[i].enabled)
+			led_classdev_resume(&lm->pwm[i].cdev);
+
+	enable_irq(client->irq);
+	set_irq_wake(client->irq, 1);
+
+	return 0;
+}
+#else
+#define lm8323_suspend	NULL
+#define lm8323_resume	NULL
+#endif
+
+static const struct i2c_device_id lm8323_id[] = {
+	{ "lm8323", 0 },
+	{ }
+};
+
+static struct i2c_driver lm8323_i2c_driver = {
+	.driver = {
+		.name	= "lm8323",
+	},
+	.probe		= lm8323_probe,
+	.remove		= __devexit_p(lm8323_remove),
+	.suspend	= lm8323_suspend,
+	.resume		= lm8323_resume,
+	.id_table	= lm8323_id,
+};
+MODULE_DEVICE_TABLE(i2c, lm8323_id);
+
+static int __init lm8323_init(void)
+{
+	return i2c_add_driver(&lm8323_i2c_driver);
+}
+module_init(lm8323_init);
+
+static void __exit lm8323_exit(void)
+{
+	i2c_del_driver(&lm8323_i2c_driver);
+}
+module_exit(lm8323_exit);
+
+MODULE_AUTHOR("Timo O. Karjalainen <timo.o.karjalainen@nokia.com>");
+MODULE_AUTHOR("Daniel Stone");
+MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>");
+MODULE_DESCRIPTION("LM8323 keypad driver");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 06f46fcc077..1acfa3a05aa 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -193,6 +193,16 @@ config INPUT_CM109
 	  To compile this driver as a module, choose M here: the module will be
 	  called cm109.
 
+config INPUT_TWL4030_PWRBUTTON
+	tristate "TWL4030 Power button Driver"
+	depends on TWL4030_CORE
+	help
+	  Say Y here if you want to enable power key reporting via the
+	  TWL4030 family of chips.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called twl4030_pwrbutton.
+
 config INPUT_UINPUT
 	tristate "User level driver support"
 	help
@@ -250,4 +260,13 @@ config INPUT_RB532_BUTTON
 	  To compile this driver as a module, choose M here: the
 	  module will be called rb532_button.
 
+config INPUT_DM355EVM
+	tristate "TI DaVinci DM355 EVM Keypad and IR Remote"
+	depends on MFD_DM355EVM_MSP
+	help
+	  Supports the pushbuttons and IR remote used with
+	  the DM355 EVM board.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called dm355evm_keys.
 endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index eb3f407baed..0d979fd4cd5 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_INPUT_ATI_REMOTE2)		+= ati_remote2.o
 obj-$(CONFIG_INPUT_ATLAS_BTNS)		+= atlas_btns.o
 obj-$(CONFIG_INPUT_CM109)		+= cm109.o
 obj-$(CONFIG_INPUT_COBALT_BTNS)		+= cobalt_btns.o
+obj-$(CONFIG_INPUT_DM355EVM)		+= dm355evm_keys.o
 obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
 obj-$(CONFIG_INPUT_IXP4XX_BEEPER)	+= ixp4xx-beeper.o
 obj-$(CONFIG_INPUT_KEYSPAN_REMOTE)	+= keyspan_remote.o
@@ -21,6 +22,7 @@ obj-$(CONFIG_INPUT_RB532_BUTTON)	+= rb532_button.o
 obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER)	+= rotary_encoder.o
 obj-$(CONFIG_INPUT_SGI_BTNS)		+= sgi_btns.o
 obj-$(CONFIG_INPUT_SPARCSPKR)		+= sparcspkr.o
+obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON)	+= twl4030-pwrbutton.o
 obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
 obj-$(CONFIG_INPUT_WISTRON_BTNS)	+= wistron_btns.o
 obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
diff --git a/drivers/input/misc/ati_remote2.c b/drivers/input/misc/ati_remote2.c
index 922c0514158..0501f0e6515 100644
--- a/drivers/input/misc/ati_remote2.c
+++ b/drivers/input/misc/ati_remote2.c
@@ -509,7 +509,7 @@ static int ati_remote2_setkeycode(struct input_dev *idev, int scancode, int keyc
 
 	old_keycode = ar2->keycode[mode][index];
 	ar2->keycode[mode][index] = keycode;
-	set_bit(keycode, idev->keybit);
+	__set_bit(keycode, idev->keybit);
 
 	for (mode = 0; mode < ATI_REMOTE2_MODES; mode++) {
 		for (index = 0; index < ARRAY_SIZE(ati_remote2_key_table); index++) {
@@ -518,7 +518,7 @@ static int ati_remote2_setkeycode(struct input_dev *idev, int scancode, int keyc
 		}
 	}
 
-	clear_bit(old_keycode, idev->keybit);
+	__clear_bit(old_keycode, idev->keybit);
 
 	return 0;
 }
@@ -543,7 +543,7 @@ static int ati_remote2_input_init(struct ati_remote2 *ar2)
 	for (mode = 0; mode < ATI_REMOTE2_MODES; mode++) {
 		for (index = 0; index < ARRAY_SIZE(ati_remote2_key_table); index++) {
 			ar2->keycode[mode][index] = ati_remote2_key_table[index].keycode;
-			set_bit(ar2->keycode[mode][index], idev->keybit);
+			__set_bit(ar2->keycode[mode][index], idev->keybit);
 		}
 	}
 
@@ -554,11 +554,11 @@ static int ati_remote2_input_init(struct ati_remote2 *ar2)
 	ar2->keycode[ATI_REMOTE2_AUX3][index] = KEY_PROG3;
 	ar2->keycode[ATI_REMOTE2_AUX4][index] = KEY_PROG4;
 	ar2->keycode[ATI_REMOTE2_PC][index] = KEY_PC;
-	set_bit(KEY_PROG1, idev->keybit);
-	set_bit(KEY_PROG2, idev->keybit);
-	set_bit(KEY_PROG3, idev->keybit);
-	set_bit(KEY_PROG4, idev->keybit);
-	set_bit(KEY_PC, idev->keybit);
+	__set_bit(KEY_PROG1, idev->keybit);
+	__set_bit(KEY_PROG2, idev->keybit);
+	__set_bit(KEY_PROG3, idev->keybit);
+	__set_bit(KEY_PROG4, idev->keybit);
+	__set_bit(KEY_PC, idev->keybit);
 
 	idev->rep[REP_DELAY]  = 250;
 	idev->rep[REP_PERIOD] = 33;
diff --git a/drivers/input/misc/dm355evm_keys.c b/drivers/input/misc/dm355evm_keys.c
new file mode 100644
index 00000000000..a63315ce4a6
--- /dev/null
+++ b/drivers/input/misc/dm355evm_keys.c
@@ -0,0 +1,329 @@
+/*
+ * dm355evm_keys.c - support buttons and IR remote on DM355 EVM board
+ *
+ * Copyright (c) 2008 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+
+#include <linux/i2c/dm355evm_msp.h>
+
+
+/*
+ * The MSP430 firmware on the DM355 EVM monitors on-board pushbuttons
+ * and an IR receptor used for the remote control.  When any key is
+ * pressed, or its autorepeat kicks in, an event is sent.  This driver
+ * read those events from the small (32 event) queue and reports them.
+ *
+ * Because we communicate with the MSP430 using I2C, and all I2C calls
+ * in Linux sleep, we need to cons up a kind of threaded IRQ handler
+ * using a work_struct.  The IRQ is active low, but we use it through
+ * the GPIO controller so we can trigger on falling edges.
+ *
+ * Note that physically there can only be one of these devices.
+ *
+ * This driver was tested with firmware revision A4.
+ */
+struct dm355evm_keys {
+	struct work_struct	work;
+	struct input_dev	*input;
+	struct device		*dev;
+	int			irq;
+};
+
+static irqreturn_t dm355evm_keys_irq(int irq, void *_keys)
+{
+	struct dm355evm_keys	*keys = _keys;
+
+	schedule_work(&keys->work);
+	return IRQ_HANDLED;
+}
+
+/* These initial keycodes can be remapped by dm355evm_setkeycode(). */
+static struct {
+	u16	event;
+	u16	keycode;
+} dm355evm_keys[] = {
+
+	/*
+	 * Pushbuttons on the EVM board ... note that the labels for these
+	 * are SW10/SW11/etc on the PC board.  The left/right orientation
+	 * comes only from the firmware's documentation, and presumes the
+	 * power connector is immediately in front of you and the IR sensor
+	 * is to the right.  (That is, rotate the board counter-clockwise
+	 * by 90 degrees from the SW10/etc and "DM355 EVM" labels.)
+	 */
+	{ 0x00d8, KEY_OK, },		/* SW12 */
+	{ 0x00b8, KEY_UP, },		/* SW13 */
+	{ 0x00e8, KEY_DOWN, },		/* SW11 */
+	{ 0x0078, KEY_LEFT, },		/* SW14 */
+	{ 0x00f0, KEY_RIGHT, },		/* SW10 */
+
+	/*
+	 * IR buttons ... codes assigned to match the universal remote
+	 * provided with the EVM (Philips PM4S) using DVD code 0020.
+	 *
+	 * These event codes match firmware documentation, but other
+	 * remote controls could easily send more RC5-encoded events.
+	 * The PM4S manual was used in several cases to help select
+	 * a keycode reflecting the intended usage.
+	 *
+	 * RC5 codes are 14 bits, with two start bits (0x3 prefix)
+	 * and a toggle bit (masked out below).
+	 */
+	{ 0x300c, KEY_POWER, },		/* NOTE: docs omit this */
+	{ 0x3000, KEY_NUMERIC_0, },
+	{ 0x3001, KEY_NUMERIC_1, },
+	{ 0x3002, KEY_NUMERIC_2, },
+	{ 0x3003, KEY_NUMERIC_3, },
+	{ 0x3004, KEY_NUMERIC_4, },
+	{ 0x3005, KEY_NUMERIC_5, },
+	{ 0x3006, KEY_NUMERIC_6, },
+	{ 0x3007, KEY_NUMERIC_7, },
+	{ 0x3008, KEY_NUMERIC_8, },
+	{ 0x3009, KEY_NUMERIC_9, },
+	{ 0x3022, KEY_ENTER, },
+	{ 0x30ec, KEY_MODE, },		/* "tv/vcr/..." */
+	{ 0x300f, KEY_SELECT, },	/* "info" */
+	{ 0x3020, KEY_CHANNELUP, },	/* "up" */
+	{ 0x302e, KEY_MENU, },		/* "in/out" */
+	{ 0x3011, KEY_VOLUMEDOWN, },	/* "left" */
+	{ 0x300d, KEY_MUTE, },		/* "ok" */
+	{ 0x3010, KEY_VOLUMEUP, },	/* "right" */
+	{ 0x301e, KEY_SUBTITLE, },	/* "cc" */
+	{ 0x3021, KEY_CHANNELDOWN, },	/* "down" */
+	{ 0x3022, KEY_PREVIOUS, },
+	{ 0x3026, KEY_SLEEP, },
+	{ 0x3172, KEY_REWIND, },	/* NOTE: docs wrongly say 0x30ca */
+	{ 0x3175, KEY_PLAY, },
+	{ 0x3174, KEY_FASTFORWARD, },
+	{ 0x3177, KEY_RECORD, },
+	{ 0x3176, KEY_STOP, },
+	{ 0x3169, KEY_PAUSE, },
+};
+
+static void dm355evm_keys_work(struct work_struct *work)
+{
+	struct dm355evm_keys	*keys;
+	int			status;
+
+	keys = container_of(work, struct dm355evm_keys, work);
+
+	/* For simplicity we ignore INPUT_COUNT and just read
+	 * events until we get the "queue empty" indicator.
+	 * Reading INPUT_LOW decrements the count.
+	 */
+	for (;;) {
+		static u16	last_event;
+		u16		event;
+		int		keycode;
+		int		i;
+
+		status = dm355evm_msp_read(DM355EVM_MSP_INPUT_HIGH);
+		if (status < 0) {
+			dev_dbg(keys->dev, "input high err %d\n",
+					status);
+			break;
+		}
+		event = status << 8;
+
+		status = dm355evm_msp_read(DM355EVM_MSP_INPUT_LOW);
+		if (status < 0) {
+			dev_dbg(keys->dev, "input low err %d\n",
+					status);
+			break;
+		}
+		event |= status;
+		if (event == 0xdead)
+			break;
+
+		/* Press and release a button:  two events, same code.
+		 * Press and hold (autorepeat), then release: N events
+		 * (N > 2), same code.  For RC5 buttons the toggle bits
+		 * distinguish (for example) "1-autorepeat" from "1 1";
+		 * but PCB buttons don't support that bit.
+		 *
+		 * So we must synthesize release events.  We do that by
+		 * mapping events to a press/release event pair; then
+		 * to avoid adding extra events, skip the second event
+		 * of each pair.
+		 */
+		if (event == last_event) {
+			last_event = 0;
+			continue;
+		}
+		last_event = event;
+
+		/* ignore the RC5 toggle bit */
+		event &= ~0x0800;
+
+		/* find the key, or leave it as unknown */
+		keycode = KEY_UNKNOWN;
+		for (i = 0; i < ARRAY_SIZE(dm355evm_keys); i++) {
+			if (dm355evm_keys[i].event != event)
+				continue;
+			keycode = dm355evm_keys[i].keycode;
+			break;
+		}
+		dev_dbg(keys->dev,
+			"input event 0x%04x--> keycode %d\n",
+			event, keycode);
+
+		/* report press + release */
+		input_report_key(keys->input, keycode, 1);
+		input_sync(keys->input);
+		input_report_key(keys->input, keycode, 0);
+		input_sync(keys->input);
+	}
+}
+
+static int dm355evm_setkeycode(struct input_dev *dev, int index, int keycode)
+{
+	u16		old_keycode;
+	unsigned	i;
+
+	if (((unsigned)index) >= ARRAY_SIZE(dm355evm_keys))
+		return -EINVAL;
+
+	old_keycode = dm355evm_keys[index].keycode;
+	dm355evm_keys[index].keycode = keycode;
+	set_bit(keycode, dev->keybit);
+
+	for (i = 0; i < ARRAY_SIZE(dm355evm_keys); i++) {
+		if (dm355evm_keys[index].keycode == old_keycode)
+			goto done;
+	}
+	clear_bit(old_keycode, dev->keybit);
+done:
+	return 0;
+}
+
+static int dm355evm_getkeycode(struct input_dev *dev, int index, int *keycode)
+{
+	if (((unsigned)index) >= ARRAY_SIZE(dm355evm_keys))
+		return -EINVAL;
+
+	return dm355evm_keys[index].keycode;
+}
+
+/*----------------------------------------------------------------------*/
+
+static int __devinit dm355evm_keys_probe(struct platform_device *pdev)
+{
+	struct dm355evm_keys	*keys;
+	struct input_dev	*input;
+	int			status;
+	int			i;
+
+	/* allocate instance struct and input dev */
+	keys = kzalloc(sizeof *keys, GFP_KERNEL);
+	input = input_allocate_device();
+	if (!keys || !input) {
+		status = -ENOMEM;
+		goto fail1;
+	}
+
+	keys->dev = &pdev->dev;
+	keys->input = input;
+	INIT_WORK(&keys->work, dm355evm_keys_work);
+
+	/* set up "threaded IRQ handler" */
+	status = platform_get_irq(pdev, 0);
+	if (status < 0)
+		goto fail1;
+	keys->irq = status;
+
+	input_set_drvdata(input, keys);
+
+	input->name = "DM355 EVM Controls";
+	input->phys = "dm355evm/input0";
+	input->dev.parent = &pdev->dev;
+
+	input->id.bustype = BUS_I2C;
+	input->id.product = 0x0355;
+	input->id.version = dm355evm_msp_read(DM355EVM_MSP_FIRMREV);
+
+	input->evbit[0] = BIT(EV_KEY);
+	for (i = 0; i < ARRAY_SIZE(dm355evm_keys); i++)
+		__set_bit(dm355evm_keys[i].keycode, input->keybit);
+
+	input->setkeycode = dm355evm_setkeycode;
+	input->getkeycode = dm355evm_getkeycode;
+
+	/* REVISIT:  flush the event queue? */
+
+	status = request_irq(keys->irq, dm355evm_keys_irq,
+			     IRQF_TRIGGER_FALLING,
+			     dev_name(&pdev->dev), keys);
+	if (status < 0)
+		goto fail1;
+
+	/* register */
+	status = input_register_device(input);
+	if (status < 0)
+		goto fail2;
+
+	platform_set_drvdata(pdev, keys);
+
+	return 0;
+
+fail2:
+	free_irq(keys->irq, keys);
+fail1:
+	input_free_device(input);
+	kfree(keys);
+	dev_err(&pdev->dev, "can't register, err %d\n", status);
+
+	return status;
+}
+
+static int __devexit dm355evm_keys_remove(struct platform_device *pdev)
+{
+	struct dm355evm_keys	*keys = platform_get_drvdata(pdev);
+
+	free_irq(keys->irq, keys);
+	input_unregister_device(keys->input);
+	kfree(keys);
+
+	return 0;
+}
+
+/* REVISIT:  add suspend/resume when DaVinci supports it.  The IRQ should
+ * be able to wake up the system.  When device_may_wakeup(&pdev->dev), call
+ * enable_irq_wake() on suspend, and disable_irq_wake() on resume.
+ */
+
+/*
+ * I2C is used to talk to the MSP430, but this platform device is
+ * exposed by an MFD driver that manages I2C communications.
+ */
+static struct platform_driver dm355evm_keys_driver = {
+	.probe		= dm355evm_keys_probe,
+	.remove		= __devexit_p(dm355evm_keys_remove),
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "dm355evm_keys",
+	},
+};
+
+static int __init dm355evm_keys_init(void)
+{
+	return platform_driver_register(&dm355evm_keys_driver);
+}
+module_init(dm355evm_keys_init);
+
+static void __exit dm355evm_keys_exit(void)
+{
+	platform_driver_unregister(&dm355evm_keys_driver);
+}
+module_exit(dm355evm_keys_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c
index 5bb3ab51b8c..c806fbf1e17 100644
--- a/drivers/input/misc/rotary_encoder.c
+++ b/drivers/input/misc/rotary_encoder.c
@@ -26,13 +26,17 @@
 #define DRV_NAME "rotary-encoder"
 
 struct rotary_encoder {
-	unsigned int irq_a;
-	unsigned int irq_b;
-	unsigned int pos;
-	unsigned int armed;
-	unsigned int dir;
 	struct input_dev *input;
 	struct rotary_encoder_platform_data *pdata;
+
+	unsigned int axis;
+	unsigned int pos;
+
+	unsigned int irq_a;
+	unsigned int irq_b;
+
+	bool armed;
+	unsigned char dir;	/* 0 - clockwise, 1 - CCW */
 };
 
 static irqreturn_t rotary_encoder_irq(int irq, void *dev_id)
@@ -53,21 +57,32 @@ static irqreturn_t rotary_encoder_irq(int irq, void *dev_id)
 		if (!encoder->armed)
 			break;
 
-		if (encoder->dir) {
-			/* turning counter-clockwise */
-			encoder->pos += pdata->steps;
-			encoder->pos--;
-			encoder->pos %= pdata->steps;
+		if (pdata->relative_axis) {
+			input_report_rel(encoder->input, pdata->axis,
+					 encoder->dir ? -1 : 1);
 		} else {
-			/* turning clockwise */
-			encoder->pos++;
-			encoder->pos %= pdata->steps;
+			unsigned int pos = encoder->pos;
+
+			if (encoder->dir) {
+				/* turning counter-clockwise */
+				if (pdata->rollover)
+					pos += pdata->steps;
+				if (pos)
+					pos--;
+			} else {
+				/* turning clockwise */
+				if (pdata->rollover || pos < pdata->steps)
+					pos++;
+			}
+			if (pdata->rollover)
+				pos %= pdata->steps;
+			encoder->pos = pos;
+			input_report_abs(encoder->input, pdata->axis,
+					 encoder->pos);
 		}
-
-		input_report_abs(encoder->input, pdata->axis, encoder->pos);
 		input_sync(encoder->input);
 
-		encoder->armed = 0;
+		encoder->armed = false;
 		break;
 
 	case 0x1:
@@ -77,7 +92,7 @@ static irqreturn_t rotary_encoder_irq(int irq, void *dev_id)
 		break;
 
 	case 0x3:
-		encoder->armed = 1;
+		encoder->armed = true;
 		break;
 	}
 
@@ -113,9 +128,15 @@ static int __devinit rotary_encoder_probe(struct platform_device *pdev)
 	input->name = pdev->name;
 	input->id.bustype = BUS_HOST;
 	input->dev.parent = &pdev->dev;
-	input->evbit[0] = BIT_MASK(EV_ABS);
-	input_set_abs_params(encoder->input,
-			     pdata->axis, 0, pdata->steps, 0, 1);
+
+	if (pdata->relative_axis) {
+		input->evbit[0] = BIT_MASK(EV_REL);
+		input->relbit[0] = BIT_MASK(pdata->axis);
+	} else {
+		input->evbit[0] = BIT_MASK(EV_ABS);
+		input_set_abs_params(encoder->input,
+				     pdata->axis, 0, pdata->steps, 0, 1);
+	}
 
 	err = input_register_device(input);
 	if (err) {
diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c
new file mode 100644
index 00000000000..f5fc9974a11
--- /dev/null
+++ b/drivers/input/misc/twl4030-pwrbutton.c
@@ -0,0 +1,145 @@
+/**
+ * twl4030-pwrbutton.c - TWL4030 Power Button Input Driver
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Peter De Schrijver <peter.de-schrijver@nokia.com>
+ * Several fixes by Felipe Balbi <felipe.balbi@nokia.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/i2c/twl4030.h>
+
+#define PWR_PWRON_IRQ (1 << 0)
+
+#define STS_HW_CONDITIONS 0xf
+
+static irqreturn_t powerbutton_irq(int irq, void *_pwr)
+{
+	struct input_dev *pwr = _pwr;
+	int err;
+	u8 value;
+
+#ifdef CONFIG_LOCKDEP
+	/* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which
+	 * we don't want and can't tolerate since this is a threaded
+	 * IRQ and can sleep due to the i2c reads it has to issue.
+	 * Although it might be friendlier not to borrow this thread
+	 * context...
+	 */
+	local_irq_enable();
+#endif
+
+	err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &value,
+				  STS_HW_CONDITIONS);
+	if (!err)  {
+		input_report_key(pwr, KEY_POWER, value & PWR_PWRON_IRQ);
+		input_sync(pwr);
+	} else {
+		dev_err(pwr->dev.parent, "twl4030: i2c error %d while reading"
+			" TWL4030 PM_MASTER STS_HW_CONDITIONS register\n", err);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit twl4030_pwrbutton_probe(struct platform_device *pdev)
+{
+	struct input_dev *pwr;
+	int irq = platform_get_irq(pdev, 0);
+	int err;
+
+	pwr = input_allocate_device();
+	if (!pwr) {
+		dev_dbg(&pdev->dev, "Can't allocate power button\n");
+		return -ENOMEM;
+	}
+
+	pwr->evbit[0] = BIT_MASK(EV_KEY);
+	pwr->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
+	pwr->name = "twl4030_pwrbutton";
+	pwr->phys = "twl4030_pwrbutton/input0";
+	pwr->dev.parent = &pdev->dev;
+
+	err = request_irq(irq, powerbutton_irq,
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			"twl4030_pwrbutton", pwr);
+	if (err < 0) {
+		dev_dbg(&pdev->dev, "Can't get IRQ for pwrbutton: %d\n", err);
+		goto free_input_dev;
+	}
+
+	err = input_register_device(pwr);
+	if (err) {
+		dev_dbg(&pdev->dev, "Can't register power button: %d\n", err);
+		goto free_irq;
+	}
+
+	platform_set_drvdata(pdev, pwr);
+
+	return 0;
+
+free_irq:
+	free_irq(irq, NULL);
+free_input_dev:
+	input_free_device(pwr);
+	return err;
+}
+
+static int __devexit twl4030_pwrbutton_remove(struct platform_device *pdev)
+{
+	struct input_dev *pwr = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
+
+	free_irq(irq, pwr);
+	input_unregister_device(pwr);
+
+	return 0;
+}
+
+struct platform_driver twl4030_pwrbutton_driver = {
+	.probe		= twl4030_pwrbutton_probe,
+	.remove		= __devexit_p(twl4030_pwrbutton_remove),
+	.driver		= {
+		.name	= "twl4030_pwrbutton",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init twl4030_pwrbutton_init(void)
+{
+	return platform_driver_register(&twl4030_pwrbutton_driver);
+}
+module_init(twl4030_pwrbutton_init);
+
+static void __exit twl4030_pwrbutton_exit(void)
+{
+	platform_driver_unregister(&twl4030_pwrbutton_driver);
+}
+module_exit(twl4030_pwrbutton_exit);
+
+MODULE_ALIAS("platform:twl4030_pwrbutton");
+MODULE_DESCRIPTION("Triton2 Power Button");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Peter De Schrijver <peter.de-schrijver@nokia.com>");
+MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>");
+
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index 46b7caeb281..c5a49aba418 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -54,27 +54,28 @@ static int uinput_dev_event(struct input_dev *dev, unsigned int type, unsigned i
 	return 0;
 }
 
+/* Atomically allocate an ID for the given request. Returns 0 on success. */
 static int uinput_request_alloc_id(struct uinput_device *udev, struct uinput_request *request)
 {
-	/* Atomically allocate an ID for the given request. Returns 0 on success. */
 	int id;
 	int err = -1;
 
 	spin_lock(&udev->requests_lock);
 
-	for (id = 0; id < UINPUT_NUM_REQUESTS; id++)
+	for (id = 0; id < UINPUT_NUM_REQUESTS; id++) {
 		if (!udev->requests[id]) {
 			request->id = id;
 			udev->requests[id] = request;
 			err = 0;
 			break;
 		}
+	}
 
 	spin_unlock(&udev->requests_lock);
 	return err;
 }
 
-static struct uinput_request* uinput_request_find(struct uinput_device *udev, int id)
+static struct uinput_request *uinput_request_find(struct uinput_device *udev, int id)
 {
 	/* Find an input request, by ID. Returns NULL if the ID isn't valid. */
 	if (id >= UINPUT_NUM_REQUESTS || id < 0)
@@ -99,14 +100,51 @@ static void uinput_request_done(struct uinput_device *udev, struct uinput_reques
 	complete(&request->done);
 }
 
-static int uinput_request_submit(struct input_dev *dev, struct uinput_request *request)
+static int uinput_request_submit(struct uinput_device *udev, struct uinput_request *request)
 {
+	int retval;
+
+	retval = uinput_request_reserve_slot(udev, request);
+	if (retval)
+		return retval;
+
+	retval = mutex_lock_interruptible(&udev->mutex);
+	if (retval)
+		return retval;
+
+	if (udev->state != UIST_CREATED) {
+		retval = -ENODEV;
+		goto out;
+	}
+
 	/* Tell our userspace app about this new request by queueing an input event */
-	uinput_dev_event(dev, EV_UINPUT, request->code, request->id);
+	uinput_dev_event(udev->dev, EV_UINPUT, request->code, request->id);
+
+ out:
+	mutex_unlock(&udev->mutex);
+	return retval;
+}
+
+/*
+ * Fail all ouitstanding requests so handlers don't wait for the userspace
+ * to finish processing them.
+ */
+static void uinput_flush_requests(struct uinput_device *udev)
+{
+	struct uinput_request *request;
+	int i;
+
+	spin_lock(&udev->requests_lock);
+
+	for (i = 0; i < UINPUT_NUM_REQUESTS; i++) {
+		request = udev->requests[i];
+		if (request) {
+			request->retval = -ENODEV;
+			uinput_request_done(udev, request);
+		}
+	}
 
-	/* Wait for the request to complete */
-	wait_for_completion(&request->done);
-	return request->retval;
+	spin_unlock(&udev->requests_lock);
 }
 
 static void uinput_dev_set_gain(struct input_dev *dev, u16 gain)
@@ -126,6 +164,7 @@ static int uinput_dev_playback(struct input_dev *dev, int effect_id, int value)
 
 static int uinput_dev_upload_effect(struct input_dev *dev, struct ff_effect *effect, struct ff_effect *old)
 {
+	struct uinput_device *udev = input_get_drvdata(dev);
 	struct uinput_request request;
 	int retval;
 
@@ -146,15 +185,18 @@ static int uinput_dev_upload_effect(struct input_dev *dev, struct ff_effect *eff
 	request.u.upload.effect = effect;
 	request.u.upload.old = old;
 
-	retval = uinput_request_reserve_slot(input_get_drvdata(dev), &request);
-	if (!retval)
-		retval = uinput_request_submit(dev, &request);
+	retval = uinput_request_submit(udev, &request);
+	if (!retval) {
+		wait_for_completion(&request.done);
+		retval = request.retval;
+	}
 
 	return retval;
 }
 
 static int uinput_dev_erase_effect(struct input_dev *dev, int effect_id)
 {
+	struct uinput_device *udev = input_get_drvdata(dev);
 	struct uinput_request request;
 	int retval;
 
@@ -166,9 +208,11 @@ static int uinput_dev_erase_effect(struct input_dev *dev, int effect_id)
 	request.code = UI_FF_ERASE;
 	request.u.effect_id = effect_id;
 
-	retval = uinput_request_reserve_slot(input_get_drvdata(dev), &request);
-	if (!retval)
-		retval = uinput_request_submit(dev, &request);
+	retval = uinput_request_submit(udev, &request);
+	if (!retval) {
+		wait_for_completion(&request.done);
+		retval = request.retval;
+	}
 
 	return retval;
 }
@@ -176,20 +220,24 @@ static int uinput_dev_erase_effect(struct input_dev *dev, int effect_id)
 static void uinput_destroy_device(struct uinput_device *udev)
 {
 	const char *name, *phys;
+	struct input_dev *dev = udev->dev;
+	enum uinput_state old_state = udev->state;
 
-	if (udev->dev) {
-		name = udev->dev->name;
-		phys = udev->dev->phys;
-		if (udev->state == UIST_CREATED)
-			input_unregister_device(udev->dev);
-		else
-			input_free_device(udev->dev);
+	udev->state = UIST_NEW_DEVICE;
+
+	if (dev) {
+		name = dev->name;
+		phys = dev->phys;
+		if (old_state == UIST_CREATED) {
+			uinput_flush_requests(udev);
+			input_unregister_device(dev);
+		} else {
+			input_free_device(dev);
+		}
 		kfree(name);
 		kfree(phys);
 		udev->dev = NULL;
 	}
-
-	udev->state = UIST_NEW_DEVICE;
 }
 
 static int uinput_create_device(struct uinput_device *udev)
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index c66cc3d08c2..8a2c5b14c8d 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -303,4 +303,22 @@ config MOUSE_MAPLE
 	  To compile this driver as a module choose M here: the module will be
 	  called maplemouse.
 
+config MOUSE_SYNAPTICS_I2C
+	tristate "Synaptics I2C Touchpad support"
+	depends on I2C
+	help
+	  This driver supports Synaptics I2C touchpad controller on eXeda
+	  mobile device.
+	  The device will not work the synaptics X11 driver because
+	  (i) it  reports only relative coordinates and has no capabilities
+	  to report absolute coordinates
+	  (ii) the eXeda device itself uses Xfbdev as X Server and it does
+	  not allow using xf86-input-* drivers.
+
+	  Say y here if you have eXeda device and want to use a Synaptics
+	  I2C Touchpad.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called synaptics_i2c.
+
 endif
diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
index 472189468d6..010f265ec15 100644
--- a/drivers/input/mouse/Makefile
+++ b/drivers/input/mouse/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_MOUSE_PS2)			+= psmouse.o
 obj-$(CONFIG_MOUSE_PXA930_TRKBALL)	+= pxa930_trkball.o
 obj-$(CONFIG_MOUSE_RISCPC)		+= rpcmouse.o
 obj-$(CONFIG_MOUSE_SERIAL)		+= sermouse.o
+obj-$(CONFIG_MOUSE_SYNAPTICS_I2C)	+= synaptics_i2c.o
 obj-$(CONFIG_MOUSE_VSXXXAA)		+= vsxxxaa.o
 
 psmouse-objs := psmouse-base.o synaptics.o
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index daecc75c72e..5547e2429fb 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -38,25 +38,25 @@
 
 static const struct alps_model_info alps_model_data[] = {
 	{ { 0x32, 0x02, 0x14 },	0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */
-	{ { 0x33, 0x02, 0x0a },	0x88, 0xf8, ALPS_OLDPROTO },		/* UMAX-530T */
+	{ { 0x33, 0x02, 0x0a },	0x88, 0xf8, ALPS_OLDPROTO },		  /* UMAX-530T */
 	{ { 0x53, 0x02, 0x0a },	0xf8, 0xf8, 0 },
 	{ { 0x53, 0x02, 0x14 },	0xf8, 0xf8, 0 },
-	{ { 0x60, 0x03, 0xc8 }, 0xf8, 0xf8, 0 },			/* HP ze1115 */
+	{ { 0x60, 0x03, 0xc8 }, 0xf8, 0xf8, 0 },			  /* HP ze1115 */
 	{ { 0x63, 0x02, 0x0a },	0xf8, 0xf8, 0 },
 	{ { 0x63, 0x02, 0x14 },	0xf8, 0xf8, 0 },
-	{ { 0x63, 0x02, 0x28 },	0xf8, 0xf8, ALPS_FW_BK_2 },		/* Fujitsu Siemens S6010 */
-	{ { 0x63, 0x02, 0x3c },	0x8f, 0x8f, ALPS_WHEEL },		/* Toshiba Satellite S2400-103 */
-	{ { 0x63, 0x02, 0x50 },	0xef, 0xef, ALPS_FW_BK_1 },		/* NEC Versa L320 */
+	{ { 0x63, 0x02, 0x28 },	0xf8, 0xf8, ALPS_FW_BK_2 },		  /* Fujitsu Siemens S6010 */
+	{ { 0x63, 0x02, 0x3c },	0x8f, 0x8f, ALPS_WHEEL },		  /* Toshiba Satellite S2400-103 */
+	{ { 0x63, 0x02, 0x50 },	0xef, 0xef, ALPS_FW_BK_1 },		  /* NEC Versa L320 */
 	{ { 0x63, 0x02, 0x64 },	0xf8, 0xf8, 0 },
-	{ { 0x63, 0x03, 0xc8 }, 0xf8, 0xf8, ALPS_PASS },		/* Dell Latitude D800 */
-	{ { 0x73, 0x00, 0x0a },	0xf8, 0xf8, ALPS_DUALPOINT },		/* ThinkPad R61 8918-5QG */
+	{ { 0x63, 0x03, 0xc8 }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D800 */
+	{ { 0x73, 0x00, 0x0a },	0xf8, 0xf8, ALPS_DUALPOINT },		  /* ThinkPad R61 8918-5QG */
 	{ { 0x73, 0x02, 0x0a },	0xf8, 0xf8, 0 },
-	{ { 0x73, 0x02, 0x14 },	0xf8, 0xf8, ALPS_FW_BK_2 },		/* Ahtec Laptop */
+	{ { 0x73, 0x02, 0x14 },	0xf8, 0xf8, ALPS_FW_BK_2 },		  /* Ahtec Laptop */
 	{ { 0x20, 0x02, 0x0e },	0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* XXX */
 	{ { 0x22, 0x02, 0x0a },	0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT },
 	{ { 0x22, 0x02, 0x14 }, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D600 */
 	{ { 0x62, 0x02, 0x14 }, 0xcf, 0xcf, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude E6500 */
-	{ { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FW_BK_1 } /* Dell Vostro 1400 */
+	{ { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FW_BK_1 },		  /* Dell Vostro 1400 */
 };
 
 /*
@@ -132,18 +132,23 @@ static void alps_process_packet(struct psmouse *psmouse)
 	ges = packet[2] & 1;
 	fin = packet[2] & 2;
 
-	input_report_key(dev, BTN_LEFT, left);
-	input_report_key(dev, BTN_RIGHT, right);
-	input_report_key(dev, BTN_MIDDLE, middle);
-
 	if ((priv->i->flags & ALPS_DUALPOINT) && z == 127) {
 		input_report_rel(dev2, REL_X,  (x > 383 ? (x - 768) : x));
 		input_report_rel(dev2, REL_Y, -(y > 255 ? (y - 512) : y));
+
+		input_report_key(dev2, BTN_LEFT, left);
+		input_report_key(dev2, BTN_RIGHT, right);
+		input_report_key(dev2, BTN_MIDDLE, middle);
+
 		input_sync(dev);
 		input_sync(dev2);
 		return;
 	}
 
+	input_report_key(dev, BTN_LEFT, left);
+	input_report_key(dev, BTN_RIGHT, right);
+	input_report_key(dev, BTN_MIDDLE, middle);
+
 	/* Convert hardware tap to a reasonable Z value */
 	if (ges && !fin) z = 40;
 
diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index e0140fdc02a..908b5b44052 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -361,7 +361,7 @@ static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact,
 		    (!is_increasing && xy_sensors[i - 1] < xy_sensors[i])) {
 			(*fingers)++;
 			is_increasing = 1;
-		} else if (i > 0 && xy_sensors[i - 1] >= xy_sensors[i]) {
+		} else if (i > 0 && (xy_sensors[i - 1] - xy_sensors[i] > threshold)) {
 			is_increasing = 0;
 		}
 
diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c
index 15ac3205ac0..dcd4236af1e 100644
--- a/drivers/input/mouse/lifebook.c
+++ b/drivers/input/mouse/lifebook.c
@@ -159,21 +159,22 @@ static psmouse_ret_t lifebook_process_byte(struct psmouse *psmouse)
 		if (!dev2)
 			printk(KERN_WARNING "lifebook.c: got relative packet "
 				"but no relative device set up\n");
-	} else if (lifebook_use_6byte_proto) {
-		input_report_abs(dev1, ABS_X,
-				 ((packet[1] & 0x3f) << 6) | (packet[2] & 0x3f));
-		input_report_abs(dev1, ABS_Y,
-				 4096 - (((packet[4] & 0x3f) << 6) | (packet[5] & 0x3f)));
 	} else {
-		input_report_abs(dev1, ABS_X,
-				 (packet[1] | ((packet[0] & 0x30) << 4)));
-		input_report_abs(dev1, ABS_Y,
-				 1024 - (packet[2] | ((packet[0] & 0xC0) << 2)));
+		if (lifebook_use_6byte_proto) {
+			input_report_abs(dev1, ABS_X,
+				((packet[1] & 0x3f) << 6) | (packet[2] & 0x3f));
+			input_report_abs(dev1, ABS_Y,
+				4096 - (((packet[4] & 0x3f) << 6) | (packet[5] & 0x3f)));
+		} else {
+			input_report_abs(dev1, ABS_X,
+				(packet[1] | ((packet[0] & 0x30) << 4)));
+			input_report_abs(dev1, ABS_Y,
+				1024 - (packet[2] | ((packet[0] & 0xC0) << 2)));
+		}
+		input_report_key(dev1, BTN_TOUCH, packet[0] & 0x04);
+		input_sync(dev1);
 	}
 
-	input_report_key(dev1, BTN_TOUCH, packet[0] & 0x04);
-	input_sync(dev1);
-
 	if (dev2) {
 		if (relative_packet) {
 			input_report_rel(dev2, REL_X,
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index f8f86de694b..b407b355dce 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -327,7 +327,9 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
 			goto out;
 		}
 
-		if (psmouse->packet[1] == PSMOUSE_RET_ID) {
+		if (psmouse->packet[1] == PSMOUSE_RET_ID ||
+		    (psmouse->type == PSMOUSE_HGPK &&
+		     psmouse->packet[1] == PSMOUSE_RET_BAT)) {
 			__psmouse_set_state(psmouse, PSMOUSE_IGNORE);
 			serio_reconnect(serio);
 			goto out;
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index f3e4f7b0240..19984bf06ca 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -180,6 +180,29 @@ static int synaptics_identify(struct psmouse *psmouse)
 	return -1;
 }
 
+/*
+ * Read touchpad resolution
+ * Resolution is left zero if touchpad does not support the query
+ */
+static int synaptics_resolution(struct psmouse *psmouse)
+{
+	struct synaptics_data *priv = psmouse->private;
+	unsigned char res[3];
+
+	if (SYN_ID_MAJOR(priv->identity) < 4)
+		return 0;
+
+	if (synaptics_send_cmd(psmouse, SYN_QUE_RESOLUTION, res))
+		return 0;
+
+	if ((res[0] != 0) && (res[1] & 0x80) && (res[2] != 0)) {
+		priv->x_res = res[0]; /* x resolution in units/mm */
+		priv->y_res = res[2]; /* y resolution in units/mm */
+	}
+
+	return 0;
+}
+
 static int synaptics_query_hardware(struct psmouse *psmouse)
 {
 	if (synaptics_identify(psmouse))
@@ -188,6 +211,8 @@ static int synaptics_query_hardware(struct psmouse *psmouse)
 		return -1;
 	if (synaptics_capability(psmouse))
 		return -1;
+	if (synaptics_resolution(psmouse))
+		return -1;
 
 	return 0;
 }
@@ -563,6 +588,9 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
 	clear_bit(EV_REL, dev->evbit);
 	clear_bit(REL_X, dev->relbit);
 	clear_bit(REL_Y, dev->relbit);
+
+	dev->absres[ABS_X] = priv->x_res;
+	dev->absres[ABS_Y] = priv->y_res;
 }
 
 static void synaptics_disconnect(struct psmouse *psmouse)
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index 02aa4cf7bc7..30238215175 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -97,6 +97,8 @@ struct synaptics_data {
 	unsigned long int capabilities;		/* Capabilities */
 	unsigned long int ext_cap;		/* Extended Capabilities */
 	unsigned long int identity;		/* Identification */
+	int x_res;				/* X resolution in units/mm */
+	int y_res;				/* Y resolution in units/mm */
 
 	unsigned char pkt_type;			/* packet type - old, new, etc */
 	unsigned char mode;			/* current mode byte */
diff --git a/drivers/input/mouse/synaptics_i2c.c b/drivers/input/mouse/synaptics_i2c.c
new file mode 100644
index 00000000000..eac9fdde7ee
--- /dev/null
+++ b/drivers/input/mouse/synaptics_i2c.c
@@ -0,0 +1,676 @@
+/*
+ * Synaptics touchpad with I2C interface
+ *
+ * Copyright (C) 2009 Compulab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ * Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
+
+#define DRIVER_NAME		"synaptics_i2c"
+/* maximum product id is 15 characters */
+#define PRODUCT_ID_LENGTH	15
+#define REGISTER_LENGTH		8
+
+/*
+ * after soft reset, we should wait for 1 ms
+ * before the device becomes operational
+ */
+#define SOFT_RESET_DELAY_MS	3
+/* and after hard reset, we should wait for max 500ms */
+#define HARD_RESET_DELAY_MS	500
+
+/* Registers by SMBus address */
+#define PAGE_SEL_REG		0xff
+#define DEVICE_STATUS_REG	0x09
+
+/* Registers by RMI address */
+#define DEV_CONTROL_REG		0x0000
+#define INTERRUPT_EN_REG	0x0001
+#define ERR_STAT_REG		0x0002
+#define INT_REQ_STAT_REG	0x0003
+#define DEV_COMMAND_REG		0x0004
+
+#define RMI_PROT_VER_REG	0x0200
+#define MANUFACT_ID_REG		0x0201
+#define PHYS_INT_VER_REG	0x0202
+#define PROD_PROPERTY_REG	0x0203
+#define INFO_QUERY_REG0		0x0204
+#define INFO_QUERY_REG1		(INFO_QUERY_REG0 + 1)
+#define INFO_QUERY_REG2		(INFO_QUERY_REG0 + 2)
+#define INFO_QUERY_REG3		(INFO_QUERY_REG0 + 3)
+
+#define PRODUCT_ID_REG0		0x0210
+#define PRODUCT_ID_REG1		(PRODUCT_ID_REG0 + 1)
+#define PRODUCT_ID_REG2		(PRODUCT_ID_REG0 + 2)
+#define PRODUCT_ID_REG3		(PRODUCT_ID_REG0 + 3)
+#define PRODUCT_ID_REG4		(PRODUCT_ID_REG0 + 4)
+#define PRODUCT_ID_REG5		(PRODUCT_ID_REG0 + 5)
+#define PRODUCT_ID_REG6		(PRODUCT_ID_REG0 + 6)
+#define PRODUCT_ID_REG7		(PRODUCT_ID_REG0 + 7)
+#define PRODUCT_ID_REG8		(PRODUCT_ID_REG0 + 8)
+#define PRODUCT_ID_REG9		(PRODUCT_ID_REG0 + 9)
+#define PRODUCT_ID_REG10	(PRODUCT_ID_REG0 + 10)
+#define PRODUCT_ID_REG11	(PRODUCT_ID_REG0 + 11)
+#define PRODUCT_ID_REG12	(PRODUCT_ID_REG0 + 12)
+#define PRODUCT_ID_REG13	(PRODUCT_ID_REG0 + 13)
+#define PRODUCT_ID_REG14	(PRODUCT_ID_REG0 + 14)
+#define PRODUCT_ID_REG15	(PRODUCT_ID_REG0 + 15)
+
+#define DATA_REG0		0x0400
+#define ABS_PRESSURE_REG	0x0401
+#define ABS_MSB_X_REG		0x0402
+#define ABS_LSB_X_REG		(ABS_MSB_X_REG + 1)
+#define ABS_MSB_Y_REG		0x0404
+#define ABS_LSB_Y_REG		(ABS_MSB_Y_REG + 1)
+#define REL_X_REG		0x0406
+#define REL_Y_REG		0x0407
+
+#define DEV_QUERY_REG0		0x1000
+#define DEV_QUERY_REG1		(DEV_QUERY_REG0 + 1)
+#define DEV_QUERY_REG2		(DEV_QUERY_REG0 + 2)
+#define DEV_QUERY_REG3		(DEV_QUERY_REG0 + 3)
+#define DEV_QUERY_REG4		(DEV_QUERY_REG0 + 4)
+#define DEV_QUERY_REG5		(DEV_QUERY_REG0 + 5)
+#define DEV_QUERY_REG6		(DEV_QUERY_REG0 + 6)
+#define DEV_QUERY_REG7		(DEV_QUERY_REG0 + 7)
+#define DEV_QUERY_REG8		(DEV_QUERY_REG0 + 8)
+
+#define GENERAL_2D_CONTROL_REG	0x1041
+#define SENSOR_SENSITIVITY_REG	0x1044
+#define SENS_MAX_POS_MSB_REG	0x1046
+#define SENS_MAX_POS_LSB_REG	(SENS_MAX_POS_UPPER_REG + 1)
+
+/* Register bits */
+/* Device Control Register Bits */
+#define REPORT_RATE_1ST_BIT	6
+
+/* Interrupt Enable Register Bits (INTERRUPT_EN_REG) */
+#define F10_ABS_INT_ENA		0
+#define F10_REL_INT_ENA		1
+#define F20_INT_ENA		2
+
+/* Interrupt Request Register Bits (INT_REQ_STAT_REG | DEVICE_STATUS_REG) */
+#define F10_ABS_INT_REQ		0
+#define F10_REL_INT_REQ		1
+#define F20_INT_REQ		2
+/* Device Status Register Bits (DEVICE_STATUS_REG) */
+#define STAT_CONFIGURED		6
+#define STAT_ERROR		7
+
+/* Device Command Register Bits (DEV_COMMAND_REG) */
+#define RESET_COMMAND		0x01
+#define REZERO_COMMAND		0x02
+
+/* Data Register 0 Bits (DATA_REG0) */
+#define GESTURE			3
+
+/* Device Query Registers Bits */
+/* DEV_QUERY_REG3 */
+#define HAS_PALM_DETECT		1
+#define HAS_MULTI_FING		2
+#define HAS_SCROLLER		4
+#define HAS_2D_SCROLL		5
+
+/* General 2D Control Register Bits (GENERAL_2D_CONTROL_REG) */
+#define NO_DECELERATION		1
+#define REDUCE_REPORTING	3
+#define NO_FILTER		5
+
+/* Function Masks */
+/* Device Control Register Masks (DEV_CONTROL_REG) */
+#define REPORT_RATE_MSK		0xc0
+#define SLEEP_MODE_MSK		0x07
+
+/* Device Sleep Modes */
+#define FULL_AWAKE		0x0
+#define NORMAL_OP		0x1
+#define LOW_PWR_OP		0x2
+#define VERY_LOW_PWR_OP		0x3
+#define SENS_SLEEP		0x4
+#define SLEEP_MOD		0x5
+#define DEEP_SLEEP		0x6
+#define HIBERNATE		0x7
+
+/* Interrupt Register Mask */
+/* (INT_REQ_STAT_REG | DEVICE_STATUS_REG | INTERRUPT_EN_REG) */
+#define INT_ENA_REQ_MSK		0x07
+#define INT_ENA_ABS_MSK		0x01
+#define INT_ENA_REL_MSK		0x02
+#define INT_ENA_F20_MSK		0x04
+
+/* Device Status Register Masks (DEVICE_STATUS_REG) */
+#define CONFIGURED_MSK		0x40
+#define ERROR_MSK		0x80
+
+/* Data Register 0 Masks */
+#define FINGER_WIDTH_MSK	0xf0
+#define GESTURE_MSK		0x08
+#define SENSOR_STATUS_MSK	0x07
+
+/*
+ * MSB Position Register Masks
+ * ABS_MSB_X_REG | ABS_MSB_Y_REG | SENS_MAX_POS_MSB_REG |
+ * DEV_QUERY_REG3 | DEV_QUERY_REG5
+ */
+#define MSB_POSITION_MSK	0x1f
+
+/* Device Query Registers Masks */
+
+/* DEV_QUERY_REG2 */
+#define NUM_EXTRA_POS_MSK	0x07
+
+/* When in IRQ mode read the device every THREAD_IRQ_SLEEP_SECS */
+#define THREAD_IRQ_SLEEP_SECS	2
+#define THREAD_IRQ_SLEEP_MSECS	(THREAD_IRQ_SLEEP_SECS * MSEC_PER_SEC)
+
+/*
+ * When in Polling mode and no data received for NO_DATA_THRES msecs
+ * reduce the polling rate to NO_DATA_SLEEP_MSECS
+ */
+#define NO_DATA_THRES		(MSEC_PER_SEC)
+#define NO_DATA_SLEEP_MSECS	(MSEC_PER_SEC / 4)
+
+/* Control touchpad's No Deceleration option */
+static int no_decel = 1;
+module_param(no_decel, bool, 0644);
+MODULE_PARM_DESC(no_decel, "No Deceleration. Default = 1 (on)");
+
+/* Control touchpad's Reduced Reporting option */
+static int reduce_report;
+module_param(reduce_report, bool, 0644);
+MODULE_PARM_DESC(reduce_report, "Reduced Reporting. Default = 0 (off)");
+
+/* Control touchpad's No Filter option */
+static int no_filter;
+module_param(no_filter, bool, 0644);
+MODULE_PARM_DESC(no_filter, "No Filter. Default = 0 (off)");
+
+/*
+ * touchpad Attention line is Active Low and Open Drain,
+ * therefore should be connected to pulled up line
+ * and the irq configuration should be set to Falling Edge Trigger
+ */
+/* Control IRQ / Polling option */
+static int polling_req;
+module_param(polling_req, bool, 0444);
+MODULE_PARM_DESC(polling_req, "Request Polling. Default = 0 (use irq)");
+
+/* Control Polling Rate */
+static int scan_rate = 80;
+module_param(scan_rate, int, 0644);
+MODULE_PARM_DESC(scan_rate, "Polling rate in times/sec. Default = 80");
+
+/* The main device structure */
+struct synaptics_i2c {
+	struct i2c_client	*client;
+	struct input_dev	*input;
+	struct delayed_work	dwork;
+	int			no_data_count;
+	int			no_decel_param;
+	int			reduce_report_param;
+	int			no_filter_param;
+	int			scan_rate_param;
+	int			scan_ms;
+};
+
+static inline void set_scan_rate(struct synaptics_i2c *touch, int scan_rate)
+{
+	touch->scan_ms = MSEC_PER_SEC / scan_rate;
+	touch->scan_rate_param = scan_rate;
+}
+
+/*
+ * Driver's initial design makes no race condition possible on i2c bus,
+ * so there is no need in any locking.
+ * Keep it in mind, while playing with the code.
+ */
+static s32 synaptics_i2c_reg_get(struct i2c_client *client, u16 reg)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, PAGE_SEL_REG, reg >> 8);
+	if (ret == 0)
+		ret = i2c_smbus_read_byte_data(client, reg & 0xff);
+
+	return ret;
+}
+
+static s32 synaptics_i2c_reg_set(struct i2c_client *client, u16 reg, u8 val)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, PAGE_SEL_REG, reg >> 8);
+	if (ret == 0)
+		ret = i2c_smbus_write_byte_data(client, reg & 0xff, val);
+
+	return ret;
+}
+
+static s32 synaptics_i2c_word_get(struct i2c_client *client, u16 reg)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, PAGE_SEL_REG, reg >> 8);
+	if (ret == 0)
+		ret = i2c_smbus_read_word_data(client, reg & 0xff);
+
+	return ret;
+}
+
+static int synaptics_i2c_config(struct i2c_client *client)
+{
+	int ret, control;
+	u8 int_en;
+
+	/* set Report Rate to Device Highest (>=80) and Sleep to normal */
+	ret = synaptics_i2c_reg_set(client, DEV_CONTROL_REG, 0xc1);
+	if (ret)
+		return ret;
+
+	/* set Interrupt Disable to Func20 / Enable to Func10) */
+	int_en = (polling_req) ? 0 : INT_ENA_ABS_MSK | INT_ENA_REL_MSK;
+	ret = synaptics_i2c_reg_set(client, INTERRUPT_EN_REG, int_en);
+	if (ret)
+		return ret;
+
+	control = synaptics_i2c_reg_get(client, GENERAL_2D_CONTROL_REG);
+	/* No Deceleration */
+	control |= no_decel ? 1 << NO_DECELERATION : 0;
+	/* Reduced Reporting */
+	control |= reduce_report ? 1 << REDUCE_REPORTING : 0;
+	/* No Filter */
+	control |= no_filter ? 1 << NO_FILTER : 0;
+	ret = synaptics_i2c_reg_set(client, GENERAL_2D_CONTROL_REG, control);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int synaptics_i2c_reset_config(struct i2c_client *client)
+{
+	int ret;
+
+	/* Reset the Touchpad */
+	ret = synaptics_i2c_reg_set(client, DEV_COMMAND_REG, RESET_COMMAND);
+	if (ret) {
+		dev_err(&client->dev, "Unable to reset device\n");
+	} else {
+		msleep(SOFT_RESET_DELAY_MS);
+		ret = synaptics_i2c_config(client);
+		if (ret)
+			dev_err(&client->dev, "Unable to config device\n");
+	}
+
+	return ret;
+}
+
+static int synaptics_i2c_check_error(struct i2c_client *client)
+{
+	int status, ret = 0;
+
+	status = i2c_smbus_read_byte_data(client, DEVICE_STATUS_REG) &
+		(CONFIGURED_MSK | ERROR_MSK);
+
+	if (status != CONFIGURED_MSK)
+		ret = synaptics_i2c_reset_config(client);
+
+	return ret;
+}
+
+static bool synaptics_i2c_get_input(struct synaptics_i2c *touch)
+{
+	struct input_dev *input = touch->input;
+	int xy_delta, gesture;
+	s32 data;
+	s8 x_delta, y_delta;
+
+	/* Deal with spontanious resets and errors */
+	if (synaptics_i2c_check_error(touch->client))
+		return 0;
+
+	/* Get Gesture Bit */
+	data = synaptics_i2c_reg_get(touch->client, DATA_REG0);
+	gesture = (data >> GESTURE) & 0x1;
+
+	/*
+	 * Get Relative axes. we have to get them in one shot,
+	 * so we get 2 bytes starting from REL_X_REG.
+	 */
+	xy_delta = synaptics_i2c_word_get(touch->client, REL_X_REG) & 0xffff;
+
+	/* Separate X from Y */
+	x_delta = xy_delta & 0xff;
+	y_delta = (xy_delta >> REGISTER_LENGTH) & 0xff;
+
+	/* Report the button event */
+	input_report_key(input, BTN_LEFT, gesture);
+
+	/* Report the deltas */
+	input_report_rel(input, REL_X, x_delta);
+	input_report_rel(input, REL_Y, -y_delta);
+	input_sync(input);
+
+	return xy_delta || gesture;
+}
+
+static irqreturn_t synaptics_i2c_irq(int irq, void *dev_id)
+{
+	struct synaptics_i2c *touch = dev_id;
+
+	/*
+	 * We want to have the work run immediately but it might have
+	 * already been scheduled with a delay, that's why we have to
+	 * cancel it first.
+	 */
+	cancel_delayed_work(&touch->dwork);
+	schedule_delayed_work(&touch->dwork, 0);
+
+	return IRQ_HANDLED;
+}
+
+static void synaptics_i2c_check_params(struct synaptics_i2c *touch)
+{
+	bool reset = false;
+
+	if (scan_rate != touch->scan_rate_param)
+		set_scan_rate(touch, scan_rate);
+
+	if (no_decel != touch->no_decel_param) {
+		touch->no_decel_param = no_decel;
+		reset = true;
+	}
+
+	if (no_filter != touch->no_filter_param) {
+		touch->no_filter_param = no_filter;
+		reset = true;
+	}
+
+	if (reduce_report != touch->reduce_report_param) {
+		touch->reduce_report_param = reduce_report;
+		reset = true;
+	}
+
+	if (reset)
+		synaptics_i2c_reset_config(touch->client);
+}
+
+/* Control the Device polling rate / Work Handler sleep time */
+unsigned long synaptics_i2c_adjust_delay(struct synaptics_i2c *touch,
+					 bool have_data)
+{
+	unsigned long delay, nodata_count_thres;
+
+	if (polling_req) {
+		delay = touch->scan_ms;
+		if (have_data) {
+			touch->no_data_count = 0;
+		} else {
+			nodata_count_thres = NO_DATA_THRES / touch->scan_ms;
+			if (touch->no_data_count < nodata_count_thres)
+				touch->no_data_count++;
+			else
+				delay = NO_DATA_SLEEP_MSECS;
+		}
+		return msecs_to_jiffies(delay);
+	} else {
+		delay = msecs_to_jiffies(THREAD_IRQ_SLEEP_MSECS);
+		return round_jiffies_relative(delay);
+	}
+}
+
+/* Work Handler */
+static void synaptics_i2c_work_handler(struct work_struct *work)
+{
+	bool have_data;
+	struct synaptics_i2c *touch =
+			container_of(work, struct synaptics_i2c, dwork.work);
+	unsigned long delay;
+
+	synaptics_i2c_check_params(touch);
+
+	have_data = synaptics_i2c_get_input(touch);
+	delay = synaptics_i2c_adjust_delay(touch, have_data);
+
+	/*
+	 * While interrupt driven, there is no real need to poll the device.
+	 * But touchpads are very sensitive, so there could be errors
+	 * related to physical environment and the attention line isn't
+	 * neccesarily asserted. In such case we can lose the touchpad.
+	 * We poll the device once in THREAD_IRQ_SLEEP_SECS and
+	 * if error is detected, we try to reset and reconfigure the touchpad.
+	 */
+	schedule_delayed_work(&touch->dwork, delay);
+}
+
+static int synaptics_i2c_open(struct input_dev *input)
+{
+	struct synaptics_i2c *touch = input_get_drvdata(input);
+	int ret;
+
+	ret = synaptics_i2c_reset_config(touch->client);
+	if (ret)
+		return ret;
+
+	if (polling_req)
+		schedule_delayed_work(&touch->dwork,
+				       msecs_to_jiffies(NO_DATA_SLEEP_MSECS));
+
+	return 0;
+}
+
+static void synaptics_i2c_close(struct input_dev *input)
+{
+	struct synaptics_i2c *touch = input_get_drvdata(input);
+
+	if (!polling_req)
+		synaptics_i2c_reg_set(touch->client, INTERRUPT_EN_REG, 0);
+
+	cancel_delayed_work_sync(&touch->dwork);
+
+	/* Save some power */
+	synaptics_i2c_reg_set(touch->client, DEV_CONTROL_REG, DEEP_SLEEP);
+}
+
+static void synaptics_i2c_set_input_params(struct synaptics_i2c *touch)
+{
+	struct input_dev *input = touch->input;
+
+	input->name = touch->client->name;
+	input->phys = touch->client->adapter->name;
+	input->id.bustype = BUS_I2C;
+	input->id.version = synaptics_i2c_word_get(touch->client,
+						   INFO_QUERY_REG0);
+	input->dev.parent = &touch->client->dev;
+	input->open = synaptics_i2c_open;
+	input->close = synaptics_i2c_close;
+	input_set_drvdata(input, touch);
+
+	/* Register the device as mouse */
+	__set_bit(EV_REL, input->evbit);
+	__set_bit(REL_X, input->relbit);
+	__set_bit(REL_Y, input->relbit);
+
+	/* Register device's buttons and keys */
+	__set_bit(EV_KEY, input->evbit);
+	__set_bit(BTN_LEFT, input->keybit);
+}
+
+struct synaptics_i2c *synaptics_i2c_touch_create(struct i2c_client *client)
+{
+	struct synaptics_i2c *touch;
+
+	touch = kzalloc(sizeof(struct synaptics_i2c), GFP_KERNEL);
+	if (!touch)
+		return NULL;
+
+	touch->client = client;
+	touch->no_decel_param = no_decel;
+	touch->scan_rate_param = scan_rate;
+	set_scan_rate(touch, scan_rate);
+	INIT_DELAYED_WORK(&touch->dwork, synaptics_i2c_work_handler);
+
+	return touch;
+}
+
+static int __devinit synaptics_i2c_probe(struct i2c_client *client,
+			       const struct i2c_device_id *dev_id)
+{
+	int ret;
+	struct synaptics_i2c *touch;
+
+	touch = synaptics_i2c_touch_create(client);
+	if (!touch)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, touch);
+
+	ret = synaptics_i2c_reset_config(client);
+	if (ret)
+		goto err_mem_free;
+
+	if (client->irq < 1)
+		polling_req = 1;
+
+	touch->input = input_allocate_device();
+	if (!touch->input) {
+		ret = -ENOMEM;
+		goto err_mem_free;
+	}
+
+	synaptics_i2c_set_input_params(touch);
+
+	if (!polling_req) {
+		dev_dbg(&touch->client->dev,
+			 "Requesting IRQ: %d\n", touch->client->irq);
+
+		ret = request_irq(touch->client->irq, synaptics_i2c_irq,
+				  IRQF_DISABLED|IRQ_TYPE_EDGE_FALLING,
+				  DRIVER_NAME, touch);
+		if (ret) {
+			dev_warn(&touch->client->dev,
+				  "IRQ request failed: %d, "
+				  "falling back to polling\n", ret);
+			polling_req = 1;
+			synaptics_i2c_reg_set(touch->client,
+					      INTERRUPT_EN_REG, 0);
+		}
+	}
+
+	if (polling_req)
+		dev_dbg(&touch->client->dev,
+			 "Using polling at rate: %d times/sec\n", scan_rate);
+
+	/* Register the device in input subsystem */
+	ret = input_register_device(touch->input);
+	if (ret) {
+		dev_err(&client->dev,
+			 "Input device register failed: %d\n", ret);
+		goto err_input_free;
+	}
+	return 0;
+
+err_input_free:
+	input_free_device(touch->input);
+err_mem_free:
+	i2c_set_clientdata(client, NULL);
+	kfree(touch);
+
+	return ret;
+}
+
+static int __devexit synaptics_i2c_remove(struct i2c_client *client)
+{
+	struct synaptics_i2c *touch = i2c_get_clientdata(client);
+
+	if (!polling_req)
+		free_irq(touch->client->irq, touch);
+
+	input_unregister_device(touch->input);
+	i2c_set_clientdata(client, NULL);
+	kfree(touch);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int synaptics_i2c_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+	struct synaptics_i2c *touch = i2c_get_clientdata(client);
+
+	cancel_delayed_work_sync(&touch->dwork);
+
+	/* Save some power */
+	synaptics_i2c_reg_set(touch->client, DEV_CONTROL_REG, DEEP_SLEEP);
+
+	return 0;
+}
+
+static int synaptics_i2c_resume(struct i2c_client *client)
+{
+	int ret;
+	struct synaptics_i2c *touch = i2c_get_clientdata(client);
+
+	ret = synaptics_i2c_reset_config(client);
+	if (ret)
+		return ret;
+
+	schedule_delayed_work(&touch->dwork,
+			       msecs_to_jiffies(NO_DATA_SLEEP_MSECS));
+
+	return 0;
+}
+#else
+#define synaptics_i2c_suspend	NULL
+#define synaptics_i2c_resume	NULL
+#endif
+
+static const struct i2c_device_id synaptics_i2c_id_table[] = {
+	{ "synaptics_i2c", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, synaptics_i2c_id_table);
+
+static struct i2c_driver synaptics_i2c_driver = {
+	.driver = {
+		.name	= DRIVER_NAME,
+		.owner	= THIS_MODULE,
+	},
+
+	.probe		= synaptics_i2c_probe,
+	.remove		= __devexit_p(synaptics_i2c_remove),
+
+	.suspend	= synaptics_i2c_suspend,
+	.resume		= synaptics_i2c_resume,
+	.id_table	= synaptics_i2c_id_table,
+};
+
+static int __init synaptics_i2c_init(void)
+{
+	return i2c_add_driver(&synaptics_i2c_driver);
+}
+
+static void __exit synaptics_i2c_exit(void)
+{
+	i2c_del_driver(&synaptics_i2c_driver);
+}
+
+module_init(synaptics_i2c_init);
+module_exit(synaptics_i2c_exit);
+
+MODULE_DESCRIPTION("Synaptics I2C touchpad driver");
+MODULE_AUTHOR("Mike Rapoport, Igor Grinberg, Compulab");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c
index 17fd6d46d08..966b8868f79 100644
--- a/drivers/input/mousedev.c
+++ b/drivers/input/mousedev.c
@@ -60,7 +60,6 @@ struct mousedev {
 	int exist;
 	int open;
 	int minor;
-	char name[16];
 	struct input_handle handle;
 	wait_queue_head_t wait;
 	struct list_head client_list;
@@ -863,19 +862,17 @@ static struct mousedev *mousedev_create(struct input_dev *dev,
 	init_waitqueue_head(&mousedev->wait);
 
 	if (minor == MOUSEDEV_MIX)
-		strlcpy(mousedev->name, "mice", sizeof(mousedev->name));
+		dev_set_name(&mousedev->dev, "mice");
 	else
-		snprintf(mousedev->name, sizeof(mousedev->name),
-			 "mouse%d", minor);
+		dev_set_name(&mousedev->dev, "mouse%d", minor);
 
 	mousedev->minor = minor;
 	mousedev->exist = 1;
 	mousedev->handle.dev = input_get_device(dev);
-	mousedev->handle.name = mousedev->name;
+	mousedev->handle.name = dev_name(&mousedev->dev);
 	mousedev->handle.handler = handler;
 	mousedev->handle.private = mousedev;
 
-	dev_set_name(&mousedev->dev, mousedev->name);
 	mousedev->dev.class = &input_class;
 	if (dev)
 		mousedev->dev.parent = &dev->dev;
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 3cffb704e37..f919bf57293 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -10,6 +10,7 @@
  * the Free Software Foundation.
  */
 
+#include <linux/types.h>
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
@@ -921,6 +922,9 @@ static void i8042_dritek_enable(void)
 #endif
 
 #ifdef CONFIG_PM
+
+static bool i8042_suspended;
+
 /*
  * Here we try to restore the original BIOS settings. We only want to
  * do that once, when we really suspend, not when we taking memory
@@ -930,11 +934,9 @@ static void i8042_dritek_enable(void)
 
 static int i8042_suspend(struct platform_device *dev, pm_message_t state)
 {
-	if (dev->dev.power.power_state.event != state.event) {
-		if (state.event == PM_EVENT_SUSPEND)
-			i8042_controller_reset();
-
-		dev->dev.power.power_state = state;
+	if (!i8042_suspended && state.event == PM_EVENT_SUSPEND) {
+		i8042_controller_reset();
+		i8042_suspended = true;
 	}
 
 	return 0;
@@ -952,7 +954,7 @@ static int i8042_resume(struct platform_device *dev)
 /*
  * Do not bother with restoring state if we haven't suspened yet
  */
-	if (dev->dev.power.power_state.event == PM_EVENT_ON)
+	if (!i8042_suspended)
 		return 0;
 
 	error = i8042_controller_check();
@@ -998,10 +1000,9 @@ static int i8042_resume(struct platform_device *dev)
 	if (i8042_ports[I8042_KBD_PORT_NO].serio)
 		i8042_enable_kbd_port();
 
+	i8042_suspended = false;
 	i8042_interrupt(0, NULL);
 
-	dev->dev.power.power_state = PMSG_ON;
-
 	return 0;
 }
 #endif /* CONFIG_PM */
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index bc033250dfc..fb17573f8f2 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -41,17 +41,6 @@ MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
 MODULE_DESCRIPTION("Serio abstraction core");
 MODULE_LICENSE("GPL");
 
-EXPORT_SYMBOL(serio_interrupt);
-EXPORT_SYMBOL(__serio_register_port);
-EXPORT_SYMBOL(serio_unregister_port);
-EXPORT_SYMBOL(serio_unregister_child_port);
-EXPORT_SYMBOL(__serio_register_driver);
-EXPORT_SYMBOL(serio_unregister_driver);
-EXPORT_SYMBOL(serio_open);
-EXPORT_SYMBOL(serio_close);
-EXPORT_SYMBOL(serio_rescan);
-EXPORT_SYMBOL(serio_reconnect);
-
 /*
  * serio_mutex protects entire serio subsystem and is taken every time
  * serio port or driver registrered or unregistered.
@@ -506,9 +495,9 @@ static ssize_t serio_set_bind_mode(struct device *dev, struct device_attribute *
 
 	retval = count;
 	if (!strncmp(buf, "manual", count)) {
-		serio->manual_bind = 1;
+		serio->manual_bind = true;
 	} else if (!strncmp(buf, "auto", count)) {
-		serio->manual_bind = 0;
+		serio->manual_bind = false;
 	} else {
 		retval = -EINVAL;
 	}
@@ -581,7 +570,7 @@ static void serio_add_port(struct serio *serio)
 			"serio: device_add() failed for %s (%s), error: %d\n",
 			serio->phys, serio->name, error);
 	else {
-		serio->registered = 1;
+		serio->registered = true;
 		error = sysfs_create_group(&serio->dev.kobj, &serio_id_attr_group);
 		if (error)
 			printk(KERN_ERR
@@ -617,7 +606,7 @@ static void serio_destroy_port(struct serio *serio)
 	if (serio->registered) {
 		sysfs_remove_group(&serio->dev.kobj, &serio_id_attr_group);
 		device_del(&serio->dev);
-		serio->registered = 0;
+		serio->registered = false;
 	}
 
 	list_del_init(&serio->node);
@@ -692,11 +681,13 @@ void serio_rescan(struct serio *serio)
 {
 	serio_queue_event(serio, NULL, SERIO_RESCAN_PORT);
 }
+EXPORT_SYMBOL(serio_rescan);
 
 void serio_reconnect(struct serio *serio)
 {
 	serio_queue_event(serio, NULL, SERIO_RECONNECT_CHAIN);
 }
+EXPORT_SYMBOL(serio_reconnect);
 
 /*
  * Submits register request to kseriod for subsequent execution.
@@ -707,6 +698,7 @@ void __serio_register_port(struct serio *serio, struct module *owner)
 	serio_init_port(serio);
 	serio_queue_event(serio, owner, SERIO_REGISTER_PORT);
 }
+EXPORT_SYMBOL(__serio_register_port);
 
 /*
  * Synchronously unregisters serio port.
@@ -718,6 +710,7 @@ void serio_unregister_port(struct serio *serio)
 	serio_destroy_port(serio);
 	mutex_unlock(&serio_mutex);
 }
+EXPORT_SYMBOL(serio_unregister_port);
 
 /*
  * Safely unregisters child port if one is present.
@@ -731,6 +724,7 @@ void serio_unregister_child_port(struct serio *serio)
 	}
 	mutex_unlock(&serio_mutex);
 }
+EXPORT_SYMBOL(serio_unregister_child_port);
 
 
 /*
@@ -756,9 +750,9 @@ static ssize_t serio_driver_set_bind_mode(struct device_driver *drv, const char
 
 	retval = count;
 	if (!strncmp(buf, "manual", count)) {
-		serio_drv->manual_bind = 1;
+		serio_drv->manual_bind = true;
 	} else if (!strncmp(buf, "auto", count)) {
-		serio_drv->manual_bind = 0;
+		serio_drv->manual_bind = false;
 	} else {
 		retval = -EINVAL;
 	}
@@ -818,7 +812,7 @@ static void serio_attach_driver(struct serio_driver *drv)
 
 int __serio_register_driver(struct serio_driver *drv, struct module *owner, const char *mod_name)
 {
-	int manual_bind = drv->manual_bind;
+	bool manual_bind = drv->manual_bind;
 	int error;
 
 	drv->driver.bus = &serio_bus;
@@ -829,7 +823,7 @@ int __serio_register_driver(struct serio_driver *drv, struct module *owner, cons
 	 * Temporarily disable automatic binding because probing
 	 * takes long time and we are better off doing it in kseriod
 	 */
-	drv->manual_bind = 1;
+	drv->manual_bind = true;
 
 	error = driver_register(&drv->driver);
 	if (error) {
@@ -844,7 +838,7 @@ int __serio_register_driver(struct serio_driver *drv, struct module *owner, cons
 	 * driver to free ports
 	 */
 	if (!manual_bind) {
-		drv->manual_bind = 0;
+		drv->manual_bind = false;
 		error = serio_queue_event(drv, NULL, SERIO_ATTACH_DRIVER);
 		if (error) {
 			driver_unregister(&drv->driver);
@@ -854,6 +848,7 @@ int __serio_register_driver(struct serio_driver *drv, struct module *owner, cons
 
 	return 0;
 }
+EXPORT_SYMBOL(__serio_register_driver);
 
 void serio_unregister_driver(struct serio_driver *drv)
 {
@@ -861,7 +856,7 @@ void serio_unregister_driver(struct serio_driver *drv)
 
 	mutex_lock(&serio_mutex);
 
-	drv->manual_bind = 1;	/* so serio_find_driver ignores it */
+	drv->manual_bind = true;	/* so serio_find_driver ignores it */
 	serio_remove_pending_events(drv);
 
 start_over:
@@ -877,6 +872,7 @@ start_over:
 	driver_unregister(&drv->driver);
 	mutex_unlock(&serio_mutex);
 }
+EXPORT_SYMBOL(serio_unregister_driver);
 
 static void serio_set_drv(struct serio *serio, struct serio_driver *drv)
 {
@@ -937,11 +933,11 @@ static int serio_uevent(struct device *dev, struct kobj_uevent_env *env)
 #ifdef CONFIG_PM
 static int serio_suspend(struct device *dev, pm_message_t state)
 {
-	if (dev->power.power_state.event != state.event) {
-		if (state.event == PM_EVENT_SUSPEND)
-			serio_cleanup(to_serio_port(dev));
+	struct serio *serio = to_serio_port(dev);
 
-		dev->power.power_state = state;
+	if (!serio->suspended && state.event == PM_EVENT_SUSPEND) {
+		serio_cleanup(serio);
+		serio->suspended = true;
 	}
 
 	return 0;
@@ -949,14 +945,15 @@ static int serio_suspend(struct device *dev, pm_message_t state)
 
 static int serio_resume(struct device *dev)
 {
+	struct serio *serio = to_serio_port(dev);
+
 	/*
 	 * Driver reconnect can take a while, so better let kseriod
 	 * deal with it.
 	 */
-	if (dev->power.power_state.event != PM_EVENT_ON) {
-		dev->power.power_state = PMSG_ON;
-		serio_queue_event(to_serio_port(dev), NULL,
-				  SERIO_RECONNECT_PORT);
+	if (serio->suspended) {
+		serio->suspended = false;
+		serio_queue_event(serio, NULL, SERIO_RECONNECT_PORT);
 	}
 
 	return 0;
@@ -974,6 +971,7 @@ int serio_open(struct serio *serio, struct serio_driver *drv)
 	}
 	return 0;
 }
+EXPORT_SYMBOL(serio_open);
 
 /* called from serio_driver->connect/disconnect methods under serio_mutex */
 void serio_close(struct serio *serio)
@@ -983,6 +981,7 @@ void serio_close(struct serio *serio)
 
 	serio_set_drv(serio, NULL);
 }
+EXPORT_SYMBOL(serio_close);
 
 irqreturn_t serio_interrupt(struct serio *serio,
 		unsigned char data, unsigned int dfl)
@@ -1003,6 +1002,7 @@ irqreturn_t serio_interrupt(struct serio *serio,
 
 	return ret;
 }
+EXPORT_SYMBOL(serio_interrupt);
 
 static struct bus_type serio_bus = {
 	.name		= "serio",
diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c
index 2e18a1c0c35..3d32d3f4e48 100644
--- a/drivers/input/tablet/gtco.c
+++ b/drivers/input/tablet/gtco.c
@@ -1050,4 +1050,5 @@ static void __exit gtco_exit(void)
 module_init(gtco_init);
 module_exit(gtco_exit);
 
+MODULE_DESCRIPTION("GTCO digitizer USB driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h
index 9710bfd49cf..9114ae1c748 100644
--- a/drivers/input/tablet/wacom.h
+++ b/drivers/input/tablet/wacom.h
@@ -68,6 +68,7 @@
  *      v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX
  *      v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A)
  *      v1.50 (pc) - Fixed a TabletPC touch bug in 2.6.28
+ *      v1.51 (pc) - Added support for Intuos4
  */
 
 /*
@@ -88,7 +89,7 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v1.50"
+#define DRIVER_VERSION "v1.51"
 #define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
 #define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
 #define DRIVER_LICENSE "GPL"
@@ -128,6 +129,8 @@ extern void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac
 extern void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
 extern void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
 extern void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
+extern void input_dev_i4s(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
+extern void input_dev_i4(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
 extern void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
 extern void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
 extern void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index b8624f27abf..a9d5031b855 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -229,6 +229,19 @@ void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 	input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
 }
 
+void input_dev_i4s(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
+{
+	input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER);
+	input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) | BIT_MASK(BTN_1) | BIT_MASK(BTN_2) | BIT_MASK(BTN_3);
+	input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_4) | BIT_MASK(BTN_5) | BIT_MASK(BTN_6);
+	input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
+}
+
+void input_dev_i4(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
+{
+	input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_7) | BIT_MASK(BTN_8);
+}
+
 void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 {
 	input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9);
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 2638811c61a..38bf86384ae 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -283,10 +283,11 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
 static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo)
 {
 	unsigned char *data = wacom->data;
-	int idx;
+	int idx = 0;
 
 	/* tool number */
-	idx = data[1] & 0x01;
+	if (wacom->features->type == INTUOS)
+		idx = data[1] & 0x01;
 
 	/* Enter report */
 	if ((data[1] & 0xfc) == 0xc0) {
@@ -299,6 +300,7 @@ static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo)
 		switch (wacom->id[idx]) {
 			case 0x812: /* Inking pen */
 			case 0x801: /* Intuos3 Inking pen */
+			case 0x20802: /* Intuos4 Classic Pen */
 			case 0x012:
 				wacom->tool[idx] = BTN_TOOL_PENCIL;
 				break;
@@ -308,6 +310,9 @@ static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo)
 			case 0x823: /* Intuos3 Grip Pen */
 			case 0x813: /* Intuos3 Classic Pen */
 			case 0x885: /* Intuos3 Marker Pen */
+			case 0x802: /* Intuos4 Grip Pen Eraser */
+			case 0x804: /* Intuos4 Marker Pen */
+			case 0x40802: /* Intuos4 Classic Pen */
 			case 0x022:
 				wacom->tool[idx] = BTN_TOOL_PEN;
 				break;
@@ -319,10 +324,12 @@ static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo)
 		        case 0x09c:
 			case 0x094:
 			case 0x017: /* Intuos3 2D Mouse */
+			case 0x806: /* Intuos4 Mouse */
 				wacom->tool[idx] = BTN_TOOL_MOUSE;
 				break;
 			case 0x096: /* Lens cursor */
 			case 0x097: /* Intuos3 Lens cursor */
+			case 0x006: /* Intuos4 Lens cursor */
 				wacom->tool[idx] = BTN_TOOL_LENS;
 				break;
 			case 0x82a: /* Eraser */
@@ -333,12 +340,17 @@ static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo)
 			case 0x82b: /* Intuos3 Grip Pen Eraser */
 			case 0x81b: /* Intuos3 Classic Pen Eraser */
 			case 0x91b: /* Intuos3 Airbrush Eraser */
+			case 0x80c: /* Intuos4 Marker Pen Eraser */
+			case 0x80a: /* Intuos4 Grip Pen Eraser */
+			case 0x4080a: /* Intuos4 Classic Pen Eraser */
+			case 0x90a: /* Intuos4 Airbrush Eraser */
 				wacom->tool[idx] = BTN_TOOL_RUBBER;
 				break;
 			case 0xd12:
 			case 0x912:
 			case 0x112:
 			case 0x913: /* Intuos3 Airbrush */
+			case 0x902: /* Intuos4 Airbrush */
 				wacom->tool[idx] = BTN_TOOL_AIRBRUSH;
 				break;
 			default: /* Unknown tool */
@@ -349,9 +361,15 @@ static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo)
 
 	/* Exit report */
 	if ((data[1] & 0xfe) == 0x80) {
+		/*
+		 * Reset all states otherwise we lose the initial states
+		 * when in-prox next time
+		 */
 		wacom_report_abs(wcombo, ABS_X, 0);
 		wacom_report_abs(wcombo, ABS_Y, 0);
 		wacom_report_abs(wcombo, ABS_DISTANCE, 0);
+		wacom_report_abs(wcombo, ABS_TILT_X, 0);
+		wacom_report_abs(wcombo, ABS_TILT_Y, 0);
 		if (wacom->tool[idx] >= BTN_TOOL_MOUSE) {
 			wacom_report_key(wcombo, BTN_LEFT, 0);
 			wacom_report_key(wcombo, BTN_MIDDLE, 0);
@@ -362,8 +380,6 @@ static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo)
 			wacom_report_abs(wcombo, ABS_RZ, 0);
 		} else {
 			wacom_report_abs(wcombo, ABS_PRESSURE, 0);
-			wacom_report_abs(wcombo, ABS_TILT_X, 0);
-			wacom_report_abs(wcombo, ABS_TILT_Y, 0);
 			wacom_report_key(wcombo, BTN_STYLUS, 0);
 			wacom_report_key(wcombo, BTN_STYLUS2, 0);
 			wacom_report_key(wcombo, BTN_TOUCH, 0);
@@ -372,6 +388,7 @@ static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo)
 		wacom_report_key(wcombo, wacom->tool[idx], 0);
 		wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
 		wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
+		wacom->id[idx] = 0;
 		return 2;
 	}
 	return 0;
@@ -385,6 +402,8 @@ static void wacom_intuos_general(struct wacom_wac *wacom, void *wcombo)
 	/* general pen packet */
 	if ((data[1] & 0xb8) == 0xa0) {
 		t = (data[6] << 2) | ((data[7] >> 6) & 3);
+		if (wacom->features->type >= INTUOS4S && wacom->features->type <= INTUOS4L)
+			t = (t << 1) | (data[1] & 1);
 		wacom_report_abs(wcombo, ABS_PRESSURE, t);
 		wacom_report_abs(wcombo, ABS_TILT_X,
 				((data[7] << 1) & 0x7e) | (data[8] >> 7));
@@ -409,7 +428,7 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
 {
 	unsigned char *data = wacom->data;
 	unsigned int t;
-	int idx, result;
+	int idx = 0, result;
 
 	if (data[0] != 2 && data[0] != 5 && data[0] != 6 && data[0] != 12) {
 		dbg("wacom_intuos_irq: received unknown report #%d", data[0]);
@@ -417,7 +436,8 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
 	}
 
 	/* tool number */
-	idx = data[1] & 0x01;
+	if (wacom->features->type == INTUOS)
+		idx = data[1] & 0x01;
 
 	/* pad packets. Works as a second tool and is always in prox */
 	if (data[0] == 12) {
@@ -425,25 +445,54 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
 		if (wacom->tool[1] != BTN_TOOL_FINGER)
 			wacom->tool[1] = BTN_TOOL_FINGER;
 
-		wacom_report_key(wcombo, BTN_0, (data[5] & 0x01));
-		wacom_report_key(wcombo, BTN_1, (data[5] & 0x02));
-		wacom_report_key(wcombo, BTN_2, (data[5] & 0x04));
-		wacom_report_key(wcombo, BTN_3, (data[5] & 0x08));
-		wacom_report_key(wcombo, BTN_4, (data[6] & 0x01));
-		wacom_report_key(wcombo, BTN_5, (data[6] & 0x02));
-		wacom_report_key(wcombo, BTN_6, (data[6] & 0x04));
-		wacom_report_key(wcombo, BTN_7, (data[6] & 0x08));
-		wacom_report_key(wcombo, BTN_8, (data[5] & 0x10));
-		wacom_report_key(wcombo, BTN_9, (data[6] & 0x10));
-		wacom_report_abs(wcombo, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]);
-		wacom_report_abs(wcombo, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]);
-
-		if ((data[5] & 0x1f) | (data[6] & 0x1f) | (data[1] & 0x1f) |
-			data[2] | (data[3] & 0x1f) | data[4])
-			wacom_report_key(wcombo, wacom->tool[1], 1);
-		else
-			wacom_report_key(wcombo, wacom->tool[1], 0);
-		wacom_report_abs(wcombo, ABS_MISC, PAD_DEVICE_ID);
+		if (wacom->features->type >= INTUOS4S && wacom->features->type <= INTUOS4L) {
+			wacom_report_key(wcombo, BTN_0, (data[2] & 0x01));
+			wacom_report_key(wcombo, BTN_1, (data[3] & 0x01));
+			wacom_report_key(wcombo, BTN_2, (data[3] & 0x02));
+			wacom_report_key(wcombo, BTN_3, (data[3] & 0x04));
+			wacom_report_key(wcombo, BTN_4, (data[3] & 0x08));
+			wacom_report_key(wcombo, BTN_5, (data[3] & 0x10));
+			wacom_report_key(wcombo, BTN_6, (data[3] & 0x20));
+			if (data[1] & 0x80) {
+				wacom_report_abs(wcombo, ABS_WHEEL, (data[1] & 0x7f));
+			} else {
+				/* Out of proximity, clear wheel value. */
+				wacom_report_abs(wcombo, ABS_WHEEL, 0);
+			}
+			if (wacom->features->type != INTUOS4S) {
+				wacom_report_key(wcombo, BTN_7, (data[3] & 0x40));
+				wacom_report_key(wcombo, BTN_8, (data[3] & 0x80));
+			}
+			if (data[1] | (data[2] & 0x01) | data[3]) {
+				wacom_report_key(wcombo, wacom->tool[1], 1);
+				wacom_report_abs(wcombo, ABS_MISC, PAD_DEVICE_ID);
+			} else {
+				wacom_report_key(wcombo, wacom->tool[1], 0);
+				wacom_report_abs(wcombo, ABS_MISC, 0);
+			}
+		} else {
+			wacom_report_key(wcombo, BTN_0, (data[5] & 0x01));
+			wacom_report_key(wcombo, BTN_1, (data[5] & 0x02));
+			wacom_report_key(wcombo, BTN_2, (data[5] & 0x04));
+			wacom_report_key(wcombo, BTN_3, (data[5] & 0x08));
+			wacom_report_key(wcombo, BTN_4, (data[6] & 0x01));
+			wacom_report_key(wcombo, BTN_5, (data[6] & 0x02));
+			wacom_report_key(wcombo, BTN_6, (data[6] & 0x04));
+			wacom_report_key(wcombo, BTN_7, (data[6] & 0x08));
+			wacom_report_key(wcombo, BTN_8, (data[5] & 0x10));
+			wacom_report_key(wcombo, BTN_9, (data[6] & 0x10));
+			wacom_report_abs(wcombo, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]);
+			wacom_report_abs(wcombo, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]);
+
+			if ((data[5] & 0x1f) | (data[6] & 0x1f) | (data[1] & 0x1f) |
+				data[2] | (data[3] & 0x1f) | data[4]) {
+				wacom_report_key(wcombo, wacom->tool[1], 1);
+				wacom_report_abs(wcombo, ABS_MISC, PAD_DEVICE_ID);
+			} else {
+				wacom_report_key(wcombo, wacom->tool[1], 0);
+				wacom_report_abs(wcombo, ABS_MISC, 0);
+			}
+		}
 		wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xffffffff);
                 return 1;
 	}
@@ -453,10 +502,16 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
 	if (result)
                 return result-1;
 
-	/* Only large I3 and I1 & I2 support Lense Cursor */
+	/* don't proceed if we don't know the ID */
+	if (!wacom->id[idx])
+		return 0;
+
+	/* Only large Intuos support Lense Cursor */
 	if ((wacom->tool[idx] == BTN_TOOL_LENS)
 			&& ((wacom->features->type == INTUOS3)
-			|| (wacom->features->type == INTUOS3S)))
+			|| (wacom->features->type == INTUOS3S)
+			|| (wacom->features->type == INTUOS4)
+			|| (wacom->features->type == INTUOS4S)))
 		return 0;
 
 	/* Cintiq doesn't send data when RDY bit isn't set */
@@ -476,8 +531,8 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
 	/* process general packets */
 	wacom_intuos_general(wacom, wcombo);
 
-	/* 4D mouse, 2D mouse, marker pen rotation, or Lens cursor packets */
-	if ((data[1] & 0xbc) == 0xa8 || (data[1] & 0xbe) == 0xb0) {
+	/* 4D mouse, 2D mouse, marker pen rotation, tilt mouse, or Lens cursor packets */
+	if ((data[1] & 0xbc) == 0xa8 || (data[1] & 0xbe) == 0xb0 || (data[1] & 0xbc) == 0xac) {
 
 		if (data[1] & 0x02) {
 			/* Rotation packet */
@@ -506,20 +561,36 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
 			wacom_report_abs(wcombo, ABS_THROTTLE, (data[8] & 0x08) ? -t : t);
 
 		} else if (wacom->tool[idx] == BTN_TOOL_MOUSE) {
-			/* 2D mouse packet */
-			wacom_report_key(wcombo, BTN_LEFT,   data[8] & 0x04);
-			wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x08);
-			wacom_report_key(wcombo, BTN_RIGHT,  data[8] & 0x10);
-			wacom_report_rel(wcombo, REL_WHEEL, (data[8] & 0x01)
+			/* I4 mouse */
+			if (wacom->features->type >= INTUOS4S && wacom->features->type <= INTUOS4L) {
+				wacom_report_key(wcombo, BTN_LEFT,   data[6] & 0x01);
+				wacom_report_key(wcombo, BTN_MIDDLE, data[6] & 0x02);
+				wacom_report_key(wcombo, BTN_RIGHT,  data[6] & 0x04);
+				wacom_report_rel(wcombo, REL_WHEEL, ((data[7] & 0x80) >> 7)
+						 - ((data[7] & 0x40) >> 6));
+				wacom_report_key(wcombo, BTN_SIDE,   data[6] & 0x08);
+				wacom_report_key(wcombo, BTN_EXTRA,  data[6] & 0x10);
+
+				wacom_report_abs(wcombo, ABS_TILT_X,
+					((data[7] << 1) & 0x7e) | (data[8] >> 7));
+				wacom_report_abs(wcombo, ABS_TILT_Y, data[8] & 0x7f);
+			} else {
+				/* 2D mouse packet */
+				wacom_report_key(wcombo, BTN_LEFT,   data[8] & 0x04);
+				wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x08);
+				wacom_report_key(wcombo, BTN_RIGHT,  data[8] & 0x10);
+				wacom_report_rel(wcombo, REL_WHEEL, (data[8] & 0x01)
 						 - ((data[8] & 0x02) >> 1));
 
-			/* I3 2D mouse side buttons */
-			if (wacom->features->type >= INTUOS3S && wacom->features->type <= INTUOS3L) {
-				wacom_report_key(wcombo, BTN_SIDE,   data[8] & 0x40);
-				wacom_report_key(wcombo, BTN_EXTRA,  data[8] & 0x20);
+				/* I3 2D mouse side buttons */
+				if (wacom->features->type >= INTUOS3S && wacom->features->type <= INTUOS3L) {
+					wacom_report_key(wcombo, BTN_SIDE,   data[8] & 0x40);
+					wacom_report_key(wcombo, BTN_EXTRA,  data[8] & 0x20);
+				}
 			}
-
-		} else if (wacom->features->type < INTUOS3S || wacom->features->type == INTUOS3L) {
+		} else if ((wacom->features->type < INTUOS3S || wacom->features->type == INTUOS3L ||
+				wacom->features->type == INTUOS4L) &&
+			   wacom->tool[idx] == BTN_TOOL_LENS) {
 			/* Lens cursor packets */
 			wacom_report_key(wcombo, BTN_LEFT,   data[8] & 0x01);
 			wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x02);
@@ -581,6 +652,7 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, void *wcombo)
 			}
 		} else if (touchOut || !prox) { /* force touch out-prox */
 			wacom_report_abs(wcombo, ABS_MISC, TOUCH_DEVICE_ID);
+			wacom_report_key(wcombo, wacom->tool[1], 0);
 			wacom_report_key(wcombo, BTN_TOUCH, 0);
 			touchOut = 0;
 			touchInProx = 1;
@@ -669,6 +741,9 @@ int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo)
 		case INTUOS3S:
 		case INTUOS3:
 		case INTUOS3L:
+		case INTUOS4S:
+		case INTUOS4:
+		case INTUOS4L:
 		case CINTIQ:
 		case WACOM_BEE:
 			return wacom_intuos_irq(wacom_wac, wcombo);
@@ -706,6 +781,14 @@ void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_w
 		case INTUOS:
 			input_dev_i(input_dev, wacom_wac);
 			break;
+		case INTUOS4:
+		case INTUOS4L:
+			input_dev_i4(input_dev, wacom_wac);
+			/* fall through */
+		case INTUOS4S:
+			input_dev_i4s(input_dev, wacom_wac);
+			input_dev_i(input_dev, wacom_wac);
+			break;
 		case PL:
 		case PTU:
 		case TABLETPC:
@@ -766,6 +849,10 @@ static struct wacom_features wacom_features[] = {
 	{ "Wacom Intuos3 12x19", 10, 97536, 60960, 1023, 63, INTUOS3L },
 	{ "Wacom Intuos3 6x11",  10, 54204, 31750, 1023, 63, INTUOS3 },
 	{ "Wacom Intuos3 4x6",   10, 31496, 19685, 1023, 63, INTUOS3S },
+	{ "Wacom Intuos4 4x6",   10, 31496, 19685, 2047, 63, INTUOS4S },
+	{ "Wacom Intuos4 6x9",   10, 44704, 27940, 2047, 63, INTUOS4 },
+	{ "Wacom Intuos4 8x13",  10, 65024, 40640, 2047, 63, INTUOS4L },
+	{ "Wacom Intuos4 12x19", 10, 97536, 60960, 2047, 63, INTUOS4L },
 	{ "Wacom Cintiq 21UX",   10, 87200, 65600, 1023, 63, CINTIQ },
 	{ "Wacom Cintiq 20WSX",  10, 86680, 54180, 1023, 63, WACOM_BEE },
 	{ "Wacom Cintiq 12WX",   10, 53020, 33440, 1023, 63, WACOM_BEE },
@@ -825,6 +912,10 @@ static struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB4) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB5) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB7) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB8) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB9) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xBA) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xBB) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC5) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC6) },
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index f9c8b69673b..c10235aba7e 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -25,6 +25,9 @@ enum {
 	INTUOS3S,
 	INTUOS3,
 	INTUOS3L,
+	INTUOS4S,
+	INTUOS4,
+	INTUOS4L,
 	CINTIQ,
 	WACOM_BEE,
 	WACOM_MO,
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index b01fd61dadc..72e2712c7e2 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -111,6 +111,15 @@ config TOUCHSCREEN_DA9034
 	  Say Y here to enable the support for the touchscreen found
 	  on Dialog Semiconductor DA9034 PMIC.
 
+config TOUCHSCREEN_EETI
+	tristate "EETI touchscreen panel support"
+	depends on I2C
+	help
+	  Say Y here to enable support for I2C connected EETI touch panels.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called eeti_ts.
+
 config TOUCHSCREEN_FUJITSU
 	tristate "Fujitsu serial touchscreen"
 	select SERIO
@@ -341,6 +350,21 @@ config TOUCHSCREEN_WM9713
 	  Say Y here to enable support for the Wolfson Microelectronics
 	  WM9713 touchscreen controller.
 
+config TOUCHSCREEN_WM97XX_ATMEL
+	tristate "WM97xx Atmel accelerated touch"
+	depends on TOUCHSCREEN_WM97XX && (AVR32 || ARCH_AT91)
+	help
+	  Say Y here for support for streaming mode with WM97xx touchscreens
+	  on Atmel AT91 or AVR32 systems with an AC97C module.
+
+	  Be aware that this will use channel B in the controller for
+	  streaming data, this must not conflict with other AC97C drivers.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called atmel-wm97xx.
+
 config TOUCHSCREEN_WM97XX_MAINSTONE
 	tristate "WM97xx Mainstone accelerated touch"
 	depends on TOUCHSCREEN_WM97XX && ARCH_PXA
@@ -466,4 +490,12 @@ config TOUCHSCREEN_TSC2007
 	  To compile this driver as a module, choose M here: the
 	  module will be called tsc2007.
 
+config TOUCHSCREEN_W90X900
+	tristate "W90P910 touchscreen driver"
+	help
+	  Say Y here if you have a W90P910 based touchscreen.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called w90p910_ts.
+
 endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 6700f7b9d16..3e1c5e0b952 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC)	+= atmel_tsadcc.o
 obj-$(CONFIG_TOUCHSCREEN_BITSY)		+= h3600_ts_input.o
 obj-$(CONFIG_TOUCHSCREEN_CORGI)		+= corgi_ts.o
 obj-$(CONFIG_TOUCHSCREEN_GUNZE)		+= gunze.o
+obj-$(CONFIG_TOUCHSCREEN_EETI)		+= eeti_ts.o
 obj-$(CONFIG_TOUCHSCREEN_ELO)		+= elo.o
 obj-$(CONFIG_TOUCHSCREEN_FUJITSU)	+= fujitsu_ts.o
 obj-$(CONFIG_TOUCHSCREEN_INEXIO)	+= inexio.o
@@ -35,5 +36,7 @@ obj-$(CONFIG_TOUCHSCREEN_DA9034)	+= da9034-ts.o
 wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705)	+= wm9705.o
 wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712)	+= wm9712.o
 wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713)	+= wm9713.o
+obj-$(CONFIG_TOUCHSCREEN_WM97XX_ATMEL)	+= atmel-wm97xx.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE)	+= mainstone-wm97xx.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE)	+= zylonite-wm97xx.o
+obj-$(CONFIG_TOUCHSCREEN_W90X900)	+= w90p910_ts.o
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 2b01e56568f..ba9d38c3f41 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -83,6 +83,7 @@ struct ads7846_packet {
 struct ads7846 {
 	struct input_dev	*input;
 	char			phys[32];
+	char			name[32];
 
 	struct spi_device	*spi;
 
@@ -97,6 +98,8 @@ struct ads7846 {
 	u16			x_plate_ohms;
 	u16			pressure_max;
 
+	bool			swap_xy;
+
 	struct ads7846_packet	*packet;
 
 	struct spi_transfer	xfer[18];
@@ -599,6 +602,10 @@ static void ads7846_rx(void *ads)
 			dev_dbg(&ts->spi->dev, "DOWN\n");
 #endif
 		}
+
+		if (ts->swap_xy)
+			swap(x, y);
+
 		input_report_abs(input, ABS_X, x);
 		input_report_abs(input, ABS_Y, y);
 		input_report_abs(input, ABS_PRESSURE, Rt);
@@ -917,6 +924,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	ts->spi = spi;
 	ts->input = input_dev;
 	ts->vref_mv = pdata->vref_mv;
+	ts->swap_xy = pdata->swap_xy;
 
 	hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 	ts->timer.function = ads7846_timer;
@@ -958,8 +966,9 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	ts->wait_for_sync = pdata->wait_for_sync ? : null_wait_for_sync;
 
 	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev));
+	snprintf(ts->name, sizeof(ts->name), "ADS%d Touchscreen", ts->model);
 
-	input_dev->name = "ADS784x Touchscreen";
+	input_dev->name = ts->name;
 	input_dev->phys = ts->phys;
 	input_dev->dev.parent = &spi->dev;
 
@@ -1141,9 +1150,15 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 
 	if (request_irq(spi->irq, ads7846_irq, IRQF_TRIGGER_FALLING,
 			spi->dev.driver->name, ts)) {
-		dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
-		err = -EBUSY;
-		goto err_free_gpio;
+		dev_info(&spi->dev,
+			"trying pin change workaround on irq %d\n", spi->irq);
+		err = request_irq(spi->irq, ads7846_irq,
+				  IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+				  spi->dev.driver->name, ts);
+		if (err) {
+			dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
+			goto err_free_gpio;
+		}
 	}
 
 	err = ads784x_hwmon_register(spi, ts);
diff --git a/drivers/input/touchscreen/atmel-wm97xx.c b/drivers/input/touchscreen/atmel-wm97xx.c
new file mode 100644
index 00000000000..35377f583e2
--- /dev/null
+++ b/drivers/input/touchscreen/atmel-wm97xx.c
@@ -0,0 +1,446 @@
+/*
+ * Atmel AT91 and AVR32 continuous touch screen driver for Wolfson WM97xx AC97
+ * codecs.
+ *
+ * Copyright (C) 2008 - 2009 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/wm97xx.h>
+#include <linux/timer.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#define AC97C_ICA		0x10
+#define AC97C_CBRHR		0x30
+#define AC97C_CBSR		0x38
+#define AC97C_CBMR		0x3c
+#define AC97C_IER		0x54
+#define AC97C_IDR		0x58
+
+#define AC97C_RXRDY		(1 << 4)
+#define AC97C_OVRUN		(1 << 5)
+
+#define AC97C_CMR_SIZE_20	(0 << 16)
+#define AC97C_CMR_SIZE_18	(1 << 16)
+#define AC97C_CMR_SIZE_16	(2 << 16)
+#define AC97C_CMR_SIZE_10	(3 << 16)
+#define AC97C_CMR_CEM_LITTLE	(1 << 18)
+#define AC97C_CMR_CEM_BIG	(0 << 18)
+#define AC97C_CMR_CENA		(1 << 21)
+
+#define AC97C_INT_CBEVT		(1 << 4)
+
+#define AC97C_SR_CAEVT		(1 << 3)
+
+#define AC97C_CH_MASK(slot)						\
+	(0x7 << (3 * (slot - 3)))
+#define AC97C_CH_ASSIGN(slot, channel)					\
+	(AC97C_CHANNEL_##channel << (3 * (slot - 3)))
+#define AC97C_CHANNEL_NONE	0x0
+#define AC97C_CHANNEL_B		0x2
+
+#define ac97c_writel(chip, reg, val)			\
+	__raw_writel((val), (chip)->regs + AC97C_##reg)
+#define ac97c_readl(chip, reg)				\
+	__raw_readl((chip)->regs + AC97C_##reg)
+
+#ifdef CONFIG_CPU_AT32AP700X
+#define ATMEL_WM97XX_AC97C_IOMEM	(0xfff02800)
+#define ATMEL_WM97XX_AC97C_IRQ		(29)
+#define ATMEL_WM97XX_GPIO_DEFAULT	(32+16) /* Pin 16 on port B. */
+#else
+#error Unkown CPU, this driver only supports AT32AP700X CPUs.
+#endif
+
+struct continuous {
+	u16 id;    /* codec id */
+	u8 code;   /* continuous code */
+	u8 reads;  /* number of coord reads per read cycle */
+	u32 speed; /* number of coords per second */
+};
+
+#define WM_READS(sp) ((sp / HZ) + 1)
+
+static const struct continuous cinfo[] = {
+	{WM9705_ID2, 0, WM_READS(94), 94},
+	{WM9705_ID2, 1, WM_READS(188), 188},
+	{WM9705_ID2, 2, WM_READS(375), 375},
+	{WM9705_ID2, 3, WM_READS(750), 750},
+	{WM9712_ID2, 0, WM_READS(94), 94},
+	{WM9712_ID2, 1, WM_READS(188), 188},
+	{WM9712_ID2, 2, WM_READS(375), 375},
+	{WM9712_ID2, 3, WM_READS(750), 750},
+	{WM9713_ID2, 0, WM_READS(94), 94},
+	{WM9713_ID2, 1, WM_READS(120), 120},
+	{WM9713_ID2, 2, WM_READS(154), 154},
+	{WM9713_ID2, 3, WM_READS(188), 188},
+};
+
+/* Continuous speed index. */
+static int sp_idx;
+
+/*
+ * Pen sampling frequency (Hz) in continuous mode.
+ */
+static int cont_rate = 188;
+module_param(cont_rate, int, 0);
+MODULE_PARM_DESC(cont_rate, "Sampling rate in continuous mode (Hz)");
+
+/*
+ * Pen down detection.
+ *
+ * This driver can either poll or use an interrupt to indicate a pen down
+ * event. If the irq request fails then it will fall back to polling mode.
+ */
+static int pen_int = 1;
+module_param(pen_int, int, 0);
+MODULE_PARM_DESC(pen_int, "Pen down detection (1 = interrupt, 0 = polling)");
+
+/*
+ * Pressure readback.
+ *
+ * Set to 1 to read back pen down pressure.
+ */
+static int pressure;
+module_param(pressure, int, 0);
+MODULE_PARM_DESC(pressure, "Pressure readback (1 = pressure, 0 = no pressure)");
+
+/*
+ * AC97 touch data slot.
+ *
+ * Touch screen readback data ac97 slot.
+ */
+static int ac97_touch_slot = 5;
+module_param(ac97_touch_slot, int, 0);
+MODULE_PARM_DESC(ac97_touch_slot, "Touch screen data slot AC97 number");
+
+/*
+ * GPIO line number.
+ *
+ * Set to GPIO number where the signal from the WM97xx device is hooked up.
+ */
+static int atmel_gpio_line = ATMEL_WM97XX_GPIO_DEFAULT;
+module_param(atmel_gpio_line, int, 0);
+MODULE_PARM_DESC(atmel_gpio_line, "GPIO line number connected to WM97xx");
+
+struct atmel_wm97xx {
+	struct wm97xx		*wm;
+	struct timer_list	pen_timer;
+	void __iomem		*regs;
+	unsigned long		ac97c_irq;
+	unsigned long		gpio_pen;
+	unsigned long		gpio_irq;
+	unsigned short		x;
+	unsigned short		y;
+};
+
+static irqreturn_t atmel_wm97xx_channel_b_interrupt(int irq, void *dev_id)
+{
+	struct atmel_wm97xx *atmel_wm97xx = dev_id;
+	struct wm97xx *wm = atmel_wm97xx->wm;
+	int status = ac97c_readl(atmel_wm97xx, CBSR);
+	irqreturn_t retval = IRQ_NONE;
+
+	if (status & AC97C_OVRUN) {
+		dev_dbg(&wm->touch_dev->dev, "AC97C overrun\n");
+		ac97c_readl(atmel_wm97xx, CBRHR);
+		retval = IRQ_HANDLED;
+	} else if (status & AC97C_RXRDY) {
+		u16 data;
+		u16 value;
+		u16 source;
+		u16 pen_down;
+
+		data = ac97c_readl(atmel_wm97xx, CBRHR);
+		value = data & 0x0fff;
+		source = data & WM97XX_ADCSRC_MASK;
+		pen_down = (data & WM97XX_PEN_DOWN) >> 8;
+
+		if (source == WM97XX_ADCSEL_X)
+			atmel_wm97xx->x = value;
+		if (source == WM97XX_ADCSEL_Y)
+			atmel_wm97xx->y = value;
+
+		if (!pressure && source == WM97XX_ADCSEL_Y) {
+			input_report_abs(wm->input_dev, ABS_X, atmel_wm97xx->x);
+			input_report_abs(wm->input_dev, ABS_Y, atmel_wm97xx->y);
+			input_report_key(wm->input_dev, BTN_TOUCH, pen_down);
+			input_sync(wm->input_dev);
+		} else if (pressure && source == WM97XX_ADCSEL_PRES) {
+			input_report_abs(wm->input_dev, ABS_X, atmel_wm97xx->x);
+			input_report_abs(wm->input_dev, ABS_Y, atmel_wm97xx->y);
+			input_report_abs(wm->input_dev, ABS_PRESSURE, value);
+			input_report_key(wm->input_dev, BTN_TOUCH, value);
+			input_sync(wm->input_dev);
+		}
+
+		retval = IRQ_HANDLED;
+	}
+
+	return retval;
+}
+
+static void atmel_wm97xx_acc_pen_up(struct wm97xx *wm)
+{
+	struct atmel_wm97xx *atmel_wm97xx = platform_get_drvdata(wm->touch_dev);
+	struct input_dev *input_dev = wm->input_dev;
+	int pen_down = gpio_get_value(atmel_wm97xx->gpio_pen);
+
+	if (pen_down != 0) {
+		mod_timer(&atmel_wm97xx->pen_timer,
+			  jiffies + msecs_to_jiffies(1));
+	} else {
+		if (pressure)
+			input_report_abs(input_dev, ABS_PRESSURE, 0);
+		input_report_key(input_dev, BTN_TOUCH, 0);
+		input_sync(input_dev);
+	}
+}
+
+static void atmel_wm97xx_pen_timer(unsigned long data)
+{
+	atmel_wm97xx_acc_pen_up((struct wm97xx *)data);
+}
+
+static int atmel_wm97xx_acc_startup(struct wm97xx *wm)
+{
+	struct atmel_wm97xx *atmel_wm97xx = platform_get_drvdata(wm->touch_dev);
+	int idx = 0;
+
+	if (wm->ac97 == NULL)
+		return -ENODEV;
+
+	for (idx = 0; idx < ARRAY_SIZE(cinfo); idx++) {
+		if (wm->id != cinfo[idx].id)
+			continue;
+
+		sp_idx = idx;
+
+		if (cont_rate <= cinfo[idx].speed)
+			break;
+	}
+
+	wm->acc_rate = cinfo[sp_idx].code;
+	wm->acc_slot = ac97_touch_slot;
+	dev_info(&wm->touch_dev->dev, "atmel accelerated touchscreen driver, "
+			"%d samples/sec\n", cinfo[sp_idx].speed);
+
+	if (pen_int) {
+		unsigned long reg;
+
+		wm->pen_irq = atmel_wm97xx->gpio_irq;
+
+		switch (wm->id) {
+		case WM9712_ID2: /* Fall through. */
+		case WM9713_ID2:
+			/*
+			 * Use GPIO 13 (PEN_DOWN) to assert GPIO line 3
+			 * (PENDOWN).
+			 */
+			wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN,
+					WM97XX_GPIO_POL_HIGH,
+					WM97XX_GPIO_STICKY,
+					WM97XX_GPIO_WAKE);
+			wm97xx_config_gpio(wm, WM97XX_GPIO_3, WM97XX_GPIO_OUT,
+					WM97XX_GPIO_POL_HIGH,
+					WM97XX_GPIO_NOTSTICKY,
+					WM97XX_GPIO_NOWAKE);
+		case WM9705_ID2: /* Fall through. */
+			/*
+			 * Enable touch data slot in AC97 controller channel B.
+			 */
+			reg = ac97c_readl(atmel_wm97xx, ICA);
+			reg &= ~AC97C_CH_MASK(wm->acc_slot);
+			reg |= AC97C_CH_ASSIGN(wm->acc_slot, B);
+			ac97c_writel(atmel_wm97xx, ICA, reg);
+
+			/*
+			 * Enable channel and interrupt for RXRDY and OVERRUN.
+			 */
+			ac97c_writel(atmel_wm97xx, CBMR, AC97C_CMR_CENA
+					| AC97C_CMR_CEM_BIG
+					| AC97C_CMR_SIZE_16
+					| AC97C_OVRUN
+					| AC97C_RXRDY);
+			/* Dummy read to empty RXRHR. */
+			ac97c_readl(atmel_wm97xx, CBRHR);
+			/*
+			 * Enable interrupt for channel B in the AC97
+			 * controller.
+			 */
+			ac97c_writel(atmel_wm97xx, IER, AC97C_INT_CBEVT);
+			break;
+		default:
+			dev_err(&wm->touch_dev->dev, "pen down irq not "
+					"supported on this device\n");
+			pen_int = 0;
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static void atmel_wm97xx_acc_shutdown(struct wm97xx *wm)
+{
+	if (pen_int) {
+		struct atmel_wm97xx *atmel_wm97xx =
+			platform_get_drvdata(wm->touch_dev);
+		unsigned long ica;
+
+		switch (wm->id & 0xffff) {
+		case WM9705_ID2: /* Fall through. */
+		case WM9712_ID2: /* Fall through. */
+		case WM9713_ID2:
+			/* Disable slot and turn off channel B interrupts. */
+			ica = ac97c_readl(atmel_wm97xx, ICA);
+			ica &= ~AC97C_CH_MASK(wm->acc_slot);
+			ac97c_writel(atmel_wm97xx, ICA, ica);
+			ac97c_writel(atmel_wm97xx, IDR, AC97C_INT_CBEVT);
+			ac97c_writel(atmel_wm97xx, CBMR, 0);
+			wm->pen_irq = 0;
+			break;
+		default:
+			dev_err(&wm->touch_dev->dev, "unknown codec\n");
+			break;
+		}
+	}
+}
+
+static void atmel_wm97xx_irq_enable(struct wm97xx *wm, int enable)
+{
+	/* Intentionally left empty. */
+}
+
+static struct wm97xx_mach_ops atmel_mach_ops = {
+	.acc_enabled	= 1,
+	.acc_pen_up	= atmel_wm97xx_acc_pen_up,
+	.acc_startup	= atmel_wm97xx_acc_startup,
+	.acc_shutdown	= atmel_wm97xx_acc_shutdown,
+	.irq_enable	= atmel_wm97xx_irq_enable,
+	.irq_gpio	= WM97XX_GPIO_3,
+};
+
+static int __init atmel_wm97xx_probe(struct platform_device *pdev)
+{
+	struct wm97xx *wm = platform_get_drvdata(pdev);
+	struct atmel_wm97xx *atmel_wm97xx;
+	int ret;
+
+	atmel_wm97xx = kzalloc(sizeof(struct atmel_wm97xx), GFP_KERNEL);
+	if (!atmel_wm97xx) {
+		dev_dbg(&pdev->dev, "out of memory\n");
+		return -ENOMEM;
+	}
+
+	atmel_wm97xx->wm	= wm;
+	atmel_wm97xx->regs	= (void *)ATMEL_WM97XX_AC97C_IOMEM;
+	atmel_wm97xx->ac97c_irq	= ATMEL_WM97XX_AC97C_IRQ;
+	atmel_wm97xx->gpio_pen	= atmel_gpio_line;
+	atmel_wm97xx->gpio_irq	= gpio_to_irq(atmel_wm97xx->gpio_pen);
+
+	setup_timer(&atmel_wm97xx->pen_timer, atmel_wm97xx_pen_timer,
+			(unsigned long)wm);
+
+	ret = request_irq(atmel_wm97xx->ac97c_irq,
+			  atmel_wm97xx_channel_b_interrupt,
+			  IRQF_SHARED, "atmel-wm97xx-ch-b", atmel_wm97xx);
+	if (ret) {
+		dev_dbg(&pdev->dev, "could not request ac97c irq\n");
+		goto err;
+	}
+
+	platform_set_drvdata(pdev, atmel_wm97xx);
+
+	ret = wm97xx_register_mach_ops(wm, &atmel_mach_ops);
+	if (ret)
+		goto err_irq;
+
+	return ret;
+
+err_irq:
+	free_irq(atmel_wm97xx->ac97c_irq, atmel_wm97xx);
+err:
+	platform_set_drvdata(pdev, NULL);
+	kfree(atmel_wm97xx);
+	return ret;
+}
+
+static int __exit atmel_wm97xx_remove(struct platform_device *pdev)
+{
+	struct atmel_wm97xx *atmel_wm97xx = platform_get_drvdata(pdev);
+	struct wm97xx *wm = atmel_wm97xx->wm;
+
+	ac97c_writel(atmel_wm97xx, IDR, AC97C_INT_CBEVT);
+	free_irq(atmel_wm97xx->ac97c_irq, atmel_wm97xx);
+	del_timer_sync(&atmel_wm97xx->pen_timer);
+	wm97xx_unregister_mach_ops(wm);
+	platform_set_drvdata(pdev, NULL);
+	kfree(atmel_wm97xx);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int atmel_wm97xx_suspend(struct platform_device *pdev, pm_message_t msg)
+{
+	struct atmel_wm97xx *atmel_wm97xx = platform_get_drvdata(pdev);
+
+	ac97c_writel(atmel_wm97xx, IDR, AC97C_INT_CBEVT);
+	disable_irq(atmel_wm97xx->gpio_irq);
+	del_timer_sync(&atmel_wm97xx->pen_timer);
+
+	return 0;
+}
+
+static int atmel_wm97xx_resume(struct platform_device *pdev)
+{
+	struct atmel_wm97xx *atmel_wm97xx = platform_get_drvdata(pdev);
+	struct wm97xx *wm = atmel_wm97xx->wm;
+
+	if (wm->input_dev->users) {
+		enable_irq(atmel_wm97xx->gpio_irq);
+		ac97c_writel(atmel_wm97xx, IER, AC97C_INT_CBEVT);
+	}
+
+	return 0;
+}
+#else
+#define atmel_wm97xx_suspend	NULL
+#define atmel_wm97xx_resume	NULL
+#endif
+
+static struct platform_driver atmel_wm97xx_driver = {
+	.remove		= __exit_p(atmel_wm97xx_remove),
+	.driver		= {
+		.name = "wm97xx-touch",
+	},
+	.suspend	= atmel_wm97xx_suspend,
+	.resume		= atmel_wm97xx_resume,
+};
+
+static int __init atmel_wm97xx_init(void)
+{
+	return platform_driver_probe(&atmel_wm97xx_driver, atmel_wm97xx_probe);
+}
+module_init(atmel_wm97xx_init);
+
+static void __exit atmel_wm97xx_exit(void)
+{
+	platform_driver_unregister(&atmel_wm97xx_driver);
+}
+module_exit(atmel_wm97xx_exit);
+
+MODULE_AUTHOR("Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>");
+MODULE_DESCRIPTION("wm97xx continuous touch driver for Atmel AT91 and AVR32");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/eeti_ts.c b/drivers/input/touchscreen/eeti_ts.c
new file mode 100644
index 00000000000..3ab92222a52
--- /dev/null
+++ b/drivers/input/touchscreen/eeti_ts.c
@@ -0,0 +1,286 @@
+/*
+ * Touch Screen driver for EETI's I2C connected touch screen panels
+ *   Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * See EETI's software guide for the protocol specification:
+ *   http://home.eeti.com.tw/web20/eg/guide.htm
+ *
+ * Based on migor_ts.c
+ *   Copyright (c) 2008 Magnus Damm
+ *   Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>
+ *
+ * This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU  General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/timer.h>
+#include <linux/gpio.h>
+
+static int flip_x;
+module_param(flip_x, bool, 0644);
+MODULE_PARM_DESC(flip_x, "flip x coordinate");
+
+static int flip_y;
+module_param(flip_y, bool, 0644);
+MODULE_PARM_DESC(flip_y, "flip y coordinate");
+
+struct eeti_ts_priv {
+	struct i2c_client *client;
+	struct input_dev *input;
+	struct work_struct work;
+	struct mutex mutex;
+	int irq;
+};
+
+#define EETI_TS_BITDEPTH	(11)
+#define EETI_MAXVAL		((1 << (EETI_TS_BITDEPTH + 1)) - 1)
+
+#define REPORT_BIT_PRESSED	(1 << 0)
+#define REPORT_BIT_AD0		(1 << 1)
+#define REPORT_BIT_AD1		(1 << 2)
+#define REPORT_BIT_HAS_PRESSURE	(1 << 6)
+#define REPORT_RES_BITS(v)	(((v) >> 1) + EETI_TS_BITDEPTH)
+
+static void eeti_ts_read(struct work_struct *work)
+{
+	char buf[6];
+	unsigned int x, y, res, pressed, to = 100;
+	struct eeti_ts_priv *priv =
+		container_of(work, struct eeti_ts_priv, work);
+
+	mutex_lock(&priv->mutex);
+
+	while (!gpio_get_value(irq_to_gpio(priv->irq)) && --to)
+		i2c_master_recv(priv->client, buf, sizeof(buf));
+
+	if (!to) {
+		dev_err(&priv->client->dev,
+			"unable to clear IRQ - line stuck?\n");
+		goto out;
+	}
+
+	/* drop non-report packets */
+	if (!(buf[0] & 0x80))
+		goto out;
+
+	pressed = buf[0] & REPORT_BIT_PRESSED;
+	res = REPORT_RES_BITS(buf[0] & (REPORT_BIT_AD0 | REPORT_BIT_AD1));
+	x = buf[2] | (buf[1] << 8);
+	y = buf[4] | (buf[3] << 8);
+
+	/* fix the range to 11 bits */
+	x >>= res - EETI_TS_BITDEPTH;
+	y >>= res - EETI_TS_BITDEPTH;
+
+	if (flip_x)
+		x = EETI_MAXVAL - x;
+
+	if (flip_y)
+		y = EETI_MAXVAL - y;
+
+	if (buf[0] & REPORT_BIT_HAS_PRESSURE)
+		input_report_abs(priv->input, ABS_PRESSURE, buf[5]);
+
+	input_report_abs(priv->input, ABS_X, x);
+	input_report_abs(priv->input, ABS_Y, y);
+	input_report_key(priv->input, BTN_TOUCH, !!pressed);
+	input_sync(priv->input);
+
+out:
+	mutex_unlock(&priv->mutex);
+}
+
+static irqreturn_t eeti_ts_isr(int irq, void *dev_id)
+{
+	struct eeti_ts_priv *priv = dev_id;
+
+	 /* postpone I2C transactions as we are atomic */
+	schedule_work(&priv->work);
+
+	return IRQ_HANDLED;
+}
+
+static int eeti_ts_open(struct input_dev *dev)
+{
+	struct eeti_ts_priv *priv = input_get_drvdata(dev);
+
+	enable_irq(priv->irq);
+
+	/* Read the events once to arm the IRQ */
+	eeti_ts_read(&priv->work);
+
+	return 0;
+}
+
+static void eeti_ts_close(struct input_dev *dev)
+{
+	struct eeti_ts_priv *priv = input_get_drvdata(dev);
+
+	disable_irq(priv->irq);
+	cancel_work_sync(&priv->work);
+}
+
+static int __devinit eeti_ts_probe(struct i2c_client *client,
+				   const struct i2c_device_id *idp)
+{
+	struct eeti_ts_priv *priv;
+	struct input_dev *input;
+	int err = -ENOMEM;
+
+	/* In contrast to what's described in the datasheet, there seems
+	 * to be no way of probing the presence of that device using I2C
+	 * commands. So we need to blindly believe it is there, and wait
+	 * for interrupts to occur. */
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		dev_err(&client->dev, "failed to allocate driver data\n");
+		goto err0;
+	}
+
+	mutex_init(&priv->mutex);
+	input = input_allocate_device();
+
+	if (!input) {
+		dev_err(&client->dev, "Failed to allocate input device.\n");
+		goto err1;
+	}
+
+	input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	input_set_abs_params(input, ABS_X, 0, EETI_MAXVAL, 0, 0);
+	input_set_abs_params(input, ABS_Y, 0, EETI_MAXVAL, 0, 0);
+	input_set_abs_params(input, ABS_PRESSURE, 0, 0xff, 0, 0);
+
+	input->name = client->name;
+	input->id.bustype = BUS_I2C;
+	input->dev.parent = &client->dev;
+	input->open = eeti_ts_open;
+	input->close = eeti_ts_close;
+
+	priv->client = client;
+	priv->input = input;
+	priv->irq = client->irq;
+
+	INIT_WORK(&priv->work, eeti_ts_read);
+	i2c_set_clientdata(client, priv);
+	input_set_drvdata(input, priv);
+
+	err = input_register_device(input);
+	if (err)
+		goto err1;
+
+	err = request_irq(priv->irq, eeti_ts_isr, IRQF_TRIGGER_FALLING,
+			  client->name, priv);
+	if (err) {
+		dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
+		goto err2;
+	}
+
+	/* Disable the irq for now. It will be enabled once the input device
+	 * is opened. */
+	disable_irq(priv->irq);
+
+	device_init_wakeup(&client->dev, 0);
+	return 0;
+
+err2:
+	input_unregister_device(input);
+	input = NULL; /* so we dont try to free it below */
+err1:
+	input_free_device(input);
+	i2c_set_clientdata(client, NULL);
+	kfree(priv);
+err0:
+	return err;
+}
+
+static int __devexit eeti_ts_remove(struct i2c_client *client)
+{
+	struct eeti_ts_priv *priv = i2c_get_clientdata(client);
+
+	free_irq(priv->irq, priv);
+	input_unregister_device(priv->input);
+	i2c_set_clientdata(client, NULL);
+	kfree(priv);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int eeti_ts_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+	struct eeti_ts_priv *priv = i2c_get_clientdata(client);
+
+	if (device_may_wakeup(&client->dev))
+		enable_irq_wake(priv->irq);
+
+	return 0;
+}
+
+static int eeti_ts_resume(struct i2c_client *client)
+{
+	struct eeti_ts_priv *priv = i2c_get_clientdata(client);
+
+	if (device_may_wakeup(&client->dev))
+		disable_irq_wake(priv->irq);
+
+	return 0;
+}
+#else
+#define eeti_ts_suspend NULL
+#define eeti_ts_resume NULL
+#endif
+
+static const struct i2c_device_id eeti_ts_id[] = {
+	{ "eeti_ts", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, eeti_ts_id);
+
+static struct i2c_driver eeti_ts_driver = {
+	.driver = {
+		.name = "eeti_ts",
+	},
+	.probe = eeti_ts_probe,
+	.remove = __devexit_p(eeti_ts_remove),
+	.suspend = eeti_ts_suspend,
+	.resume = eeti_ts_resume,
+	.id_table = eeti_ts_id,
+};
+
+static int __init eeti_ts_init(void)
+{
+	return i2c_add_driver(&eeti_ts_driver);
+}
+
+static void __exit eeti_ts_exit(void)
+{
+	i2c_del_driver(&eeti_ts_driver);
+}
+
+MODULE_DESCRIPTION("EETI Touchscreen driver");
+MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
+MODULE_LICENSE("GPL");
+
+module_init(eeti_ts_init);
+module_exit(eeti_ts_exit);
+
diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c
index 948e167557f..880f58c6a7c 100644
--- a/drivers/input/touchscreen/tsc2007.c
+++ b/drivers/input/touchscreen/tsc2007.c
@@ -257,7 +257,7 @@ static int tsc2007_probe(struct i2c_client *client,
 	struct input_dev *input_dev;
 	int err;
 
-	if (!pdata) {
+	if (!pdata || !pdata->get_pendown_state) {
 		dev_err(&client->dev, "platform data is required!\n");
 		return -EINVAL;
 	}
diff --git a/drivers/input/touchscreen/w90p910_ts.c b/drivers/input/touchscreen/w90p910_ts.c
new file mode 100644
index 00000000000..6071f588257
--- /dev/null
+++ b/drivers/input/touchscreen/w90p910_ts.c
@@ -0,0 +1,350 @@
+/*
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+
+/* ADC controller bit defines */
+#define ADC_DELAY	0xf00
+#define ADC_DOWN	0x01
+#define ADC_TSC_Y	(0x01 << 8)
+#define ADC_TSC_X	(0x00 << 8)
+#define TSC_FOURWIRE	(~(0x03 << 1))
+#define ADC_CLK_EN	(0x01 << 28)	/* ADC clock enable */
+#define ADC_READ_CON	(0x01 << 12)
+#define ADC_CONV	(0x01 << 13)
+#define ADC_SEMIAUTO	(0x01 << 14)
+#define ADC_WAITTRIG	(0x03 << 14)
+#define ADC_RST1	(0x01 << 16)
+#define ADC_RST0	(0x00 << 16)
+#define ADC_EN		(0x01 << 17)
+#define ADC_INT		(0x01 << 18)
+#define WT_INT		(0x01 << 20)
+#define ADC_INT_EN	(0x01 << 21)
+#define LVD_INT_EN	(0x01 << 22)
+#define WT_INT_EN	(0x01 << 23)
+#define ADC_DIV		(0x04 << 1)	/* div = 6 */
+
+enum ts_state {
+	TS_WAIT_NEW_PACKET,	/* We are waiting next touch report */
+	TS_WAIT_X_COORD,	/* We are waiting for ADC to report X coord */
+	TS_WAIT_Y_COORD,	/* We are waiting for ADC to report Y coord */
+	TS_IDLE,		/* Input device is closed, don't do anything */
+};
+
+struct w90p910_ts {
+	struct input_dev *input;
+	struct timer_list timer;
+	int irq_num;
+	void __iomem *clocken;
+	void __iomem *ts_reg;
+	spinlock_t lock;
+	enum ts_state state;
+};
+
+static void w90p910_report_event(struct w90p910_ts *w90p910_ts, bool down)
+{
+	struct input_dev *dev = w90p910_ts->input;
+
+	if (down) {
+		input_report_abs(dev, ABS_X,
+				 __raw_readl(w90p910_ts->ts_reg + 0x0c));
+		input_report_abs(dev, ABS_Y,
+				 __raw_readl(w90p910_ts->ts_reg + 0x10));
+	}
+
+	input_report_key(dev, BTN_TOUCH, down);
+	input_sync(dev);
+}
+
+static void w90p910_prepare_x_reading(struct w90p910_ts *w90p910_ts)
+{
+	unsigned long ctlreg;
+
+	__raw_writel(ADC_TSC_X, w90p910_ts->ts_reg + 0x04);
+	ctlreg = __raw_readl(w90p910_ts->ts_reg);
+	ctlreg &= ~(ADC_WAITTRIG | WT_INT | WT_INT_EN);
+	ctlreg |= ADC_SEMIAUTO | ADC_INT_EN | ADC_CONV;
+	__raw_writel(ctlreg, w90p910_ts->ts_reg);
+
+	w90p910_ts->state = TS_WAIT_X_COORD;
+}
+
+static void w90p910_prepare_y_reading(struct w90p910_ts *w90p910_ts)
+{
+	unsigned long ctlreg;
+
+	__raw_writel(ADC_TSC_Y, w90p910_ts->ts_reg + 0x04);
+	ctlreg = __raw_readl(w90p910_ts->ts_reg);
+	ctlreg &= ~(ADC_WAITTRIG | ADC_INT | WT_INT_EN);
+	ctlreg |= ADC_SEMIAUTO | ADC_INT_EN | ADC_CONV;
+	__raw_writel(ctlreg, w90p910_ts->ts_reg);
+
+	w90p910_ts->state = TS_WAIT_Y_COORD;
+}
+
+static void w90p910_prepare_next_packet(struct w90p910_ts *w90p910_ts)
+{
+	unsigned long ctlreg;
+
+	ctlreg = __raw_readl(w90p910_ts->ts_reg);
+	ctlreg &= ~(ADC_INT | ADC_INT_EN | ADC_SEMIAUTO | ADC_CONV);
+	ctlreg |= ADC_WAITTRIG | WT_INT_EN;
+	__raw_writel(ctlreg, w90p910_ts->ts_reg);
+
+	w90p910_ts->state = TS_WAIT_NEW_PACKET;
+}
+
+static irqreturn_t w90p910_ts_interrupt(int irq, void *dev_id)
+{
+	struct w90p910_ts *w90p910_ts = dev_id;
+	unsigned long flags;
+
+	spin_lock_irqsave(&w90p910_ts->lock, flags);
+
+	switch (w90p910_ts->state) {
+	case TS_WAIT_NEW_PACKET:
+		/*
+		 * The controller only generates interrupts when pen
+		 * is down.
+		 */
+		del_timer(&w90p910_ts->timer);
+		w90p910_prepare_x_reading(w90p910_ts);
+		break;
+
+
+	case TS_WAIT_X_COORD:
+		w90p910_prepare_y_reading(w90p910_ts);
+		break;
+
+	case TS_WAIT_Y_COORD:
+		w90p910_report_event(w90p910_ts, true);
+		w90p910_prepare_next_packet(w90p910_ts);
+		mod_timer(&w90p910_ts->timer, jiffies + msecs_to_jiffies(100));
+		break;
+
+	case TS_IDLE:
+		break;
+	}
+
+	spin_unlock_irqrestore(&w90p910_ts->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static void w90p910_check_pen_up(unsigned long data)
+{
+	struct w90p910_ts *w90p910_ts = (struct w90p910_ts *) data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&w90p910_ts->lock, flags);
+
+	if (w90p910_ts->state == TS_WAIT_NEW_PACKET &&
+	    !(__raw_readl(w90p910_ts->ts_reg + 0x04) & ADC_DOWN)) {
+
+		w90p910_report_event(w90p910_ts, false);
+	}
+
+	spin_unlock_irqrestore(&w90p910_ts->lock, flags);
+}
+
+static int w90p910_open(struct input_dev *dev)
+{
+	struct w90p910_ts *w90p910_ts = input_get_drvdata(dev);
+	unsigned long val;
+
+	/* enable the ADC clock */
+	val = __raw_readl(w90p910_ts->clocken);
+	__raw_writel(val | ADC_CLK_EN, w90p910_ts->clocken);
+
+	__raw_writel(ADC_RST1, w90p910_ts->ts_reg);
+	msleep(1);
+	__raw_writel(ADC_RST0, w90p910_ts->ts_reg);
+	msleep(1);
+
+	/* set delay and screen type */
+	val = __raw_readl(w90p910_ts->ts_reg + 0x04);
+	__raw_writel(val & TSC_FOURWIRE, w90p910_ts->ts_reg + 0x04);
+	__raw_writel(ADC_DELAY, w90p910_ts->ts_reg + 0x08);
+
+	w90p910_ts->state = TS_WAIT_NEW_PACKET;
+	wmb();
+
+	/* set trigger mode */
+	val = __raw_readl(w90p910_ts->ts_reg);
+	val |= ADC_WAITTRIG | ADC_DIV | ADC_EN | WT_INT_EN;
+	__raw_writel(val, w90p910_ts->ts_reg);
+
+	return 0;
+}
+
+static void w90p910_close(struct input_dev *dev)
+{
+	struct w90p910_ts *w90p910_ts = input_get_drvdata(dev);
+	unsigned long val;
+
+	/* disable trigger mode */
+
+	spin_lock_irq(&w90p910_ts->lock);
+
+	w90p910_ts->state = TS_IDLE;
+
+	val = __raw_readl(w90p910_ts->ts_reg);
+	val &= ~(ADC_WAITTRIG | ADC_DIV | ADC_EN | WT_INT_EN | ADC_INT_EN);
+	__raw_writel(val, w90p910_ts->ts_reg);
+
+	spin_unlock_irq(&w90p910_ts->lock);
+
+	/* Now that interrupts are shut off we can safely delete timer */
+	del_timer_sync(&w90p910_ts->timer);
+
+	/* stop the ADC clock */
+	val = __raw_readl(w90p910_ts->clocken);
+	__raw_writel(val & ~ADC_CLK_EN, w90p910_ts->clocken);
+}
+
+static int __devinit w90x900ts_probe(struct platform_device *pdev)
+{
+	struct w90p910_ts *w90p910_ts;
+	struct input_dev *input_dev;
+	struct resource *res;
+	int err;
+
+	w90p910_ts = kzalloc(sizeof(struct w90p910_ts), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!w90p910_ts || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	w90p910_ts->input = input_dev;
+	w90p910_ts->state = TS_IDLE;
+	spin_lock_init(&w90p910_ts->lock);
+	setup_timer(&w90p910_ts->timer, w90p910_check_pen_up,
+		    (unsigned long)&w90p910_ts);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		err = -ENXIO;
+		goto fail1;
+	}
+
+	if (!request_mem_region(res->start, res->end - res->start + 1,
+				pdev->name)) {
+		err = -EBUSY;
+		goto fail1;
+	}
+
+	w90p910_ts->ts_reg = ioremap(res->start, res->end - res->start + 1);
+	if (!w90p910_ts->ts_reg) {
+		err = -ENOMEM;
+		goto fail2;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res) {
+		err = -ENXIO;
+		goto fail3;
+	}
+
+	w90p910_ts->clocken = (void __iomem *)res->start;
+
+	input_dev->name = "W90P910 TouchScreen";
+	input_dev->phys = "w90p910ts/event0";
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor  = 0x0005;
+	input_dev->id.product = 0x0001;
+	input_dev->id.version = 0x0100;
+	input_dev->dev.parent = &pdev->dev;
+	input_dev->open = w90p910_open;
+	input_dev->close = w90p910_close;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	input_set_abs_params(input_dev, ABS_X, 0, 0x400, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, 0x400, 0, 0);
+
+	input_set_drvdata(input_dev, w90p910_ts);
+
+	w90p910_ts->irq_num = platform_get_irq(pdev, 0);
+	if (request_irq(w90p910_ts->irq_num, w90p910_ts_interrupt,
+			IRQF_DISABLED, "w90p910ts", w90p910_ts)) {
+		err = -EBUSY;
+		goto fail3;
+	}
+
+	err = input_register_device(w90p910_ts->input);
+	if (err)
+		goto fail4;
+
+	platform_set_drvdata(pdev, w90p910_ts);
+
+	return 0;
+
+fail4:	free_irq(w90p910_ts->irq_num, w90p910_ts);
+fail3:	iounmap(w90p910_ts->ts_reg);
+fail2:	release_mem_region(res->start, res->end - res->start + 1);
+fail1:	input_free_device(input_dev);
+	kfree(w90p910_ts);
+	return err;
+}
+
+static int __devexit w90x900ts_remove(struct platform_device *pdev)
+{
+	struct w90p910_ts *w90p910_ts = platform_get_drvdata(pdev);
+	struct resource *res;
+
+	free_irq(w90p910_ts->irq_num, w90p910_ts);
+	del_timer_sync(&w90p910_ts->timer);
+	iounmap(w90p910_ts->ts_reg);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, res->end - res->start + 1);
+
+	input_unregister_device(w90p910_ts->input);
+	kfree(w90p910_ts);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver w90x900ts_driver = {
+	.probe		= w90x900ts_probe,
+	.remove		= __devexit_p(w90x900ts_remove),
+	.driver		= {
+		.name	= "w90x900-ts",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init w90x900ts_init(void)
+{
+	return platform_driver_register(&w90x900ts_driver);
+}
+
+static void __exit w90x900ts_exit(void)
+{
+	platform_driver_unregister(&w90x900ts_driver);
+}
+
+module_init(w90x900ts_init);
+module_exit(w90x900ts_exit);
+
+MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
+MODULE_DESCRIPTION("w90p910 touch screen driver!");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:w90p910-ts");
diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c
index 34d54e7281f..de4aad076eb 100644
--- a/drivers/isdn/i4l/isdn_net.c
+++ b/drivers/isdn/i4l/isdn_net.c
@@ -1300,7 +1300,7 @@ isdn_net_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 				netif_stop_queue(ndev);
 		}
 	}
-	return 1;
+	return NETDEV_TX_BUSY;
 }
 
 /*
diff --git a/drivers/md/dm-exception-store.h b/drivers/md/dm-exception-store.h
index 0a2e6e7f67b..c92701dc500 100644
--- a/drivers/md/dm-exception-store.h
+++ b/drivers/md/dm-exception-store.h
@@ -111,7 +111,7 @@ struct dm_exception_store {
 /*
  * Funtions to manipulate consecutive chunks
  */
-#  if defined(CONFIG_LBD) || (BITS_PER_LONG == 64)
+#  if defined(CONFIG_LBDAF) || (BITS_PER_LONG == 64)
 #    define DM_CHUNK_CONSECUTIVE_BITS 8
 #    define DM_CHUNK_NUMBER_BITS 56
 
diff --git a/drivers/md/faulty.c b/drivers/md/faulty.c
index 8695809b24b..87d88dbb667 100644
--- a/drivers/md/faulty.c
+++ b/drivers/md/faulty.c
@@ -255,14 +255,14 @@ static void status(struct seq_file *seq, mddev_t *mddev)
 }
 
 
-static int reconfig(mddev_t *mddev, int layout, int chunk_size)
+static int reshape(mddev_t *mddev)
 {
-	int mode = layout & ModeMask;
-	int count = layout >> ModeShift;
+	int mode = mddev->new_layout & ModeMask;
+	int count = mddev->new_layout >> ModeShift;
 	conf_t *conf = mddev->private;
 
-	if (chunk_size != -1)
-		return -EINVAL;
+	if (mddev->new_layout < 0)
+		return 0;
 
 	/* new layout */
 	if (mode == ClearFaults)
@@ -279,6 +279,7 @@ static int reconfig(mddev_t *mddev, int layout, int chunk_size)
 		atomic_set(&conf->counters[mode], count);
 	} else
 		return -EINVAL;
+	mddev->new_layout = -1;
 	mddev->layout = -1; /* makes sure further changes come through */
 	return 0;
 }
@@ -298,8 +299,12 @@ static int run(mddev_t *mddev)
 {
 	mdk_rdev_t *rdev;
 	int i;
+	conf_t *conf;
+
+	if (md_check_no_bitmap(mddev))
+		return -EINVAL;
 
-	conf_t *conf = kmalloc(sizeof(*conf), GFP_KERNEL);
+	conf = kmalloc(sizeof(*conf), GFP_KERNEL);
 	if (!conf)
 		return -ENOMEM;
 
@@ -315,7 +320,7 @@ static int run(mddev_t *mddev)
 	md_set_array_sectors(mddev, faulty_size(mddev, 0, 0));
 	mddev->private = conf;
 
-	reconfig(mddev, mddev->layout, -1);
+	reshape(mddev);
 
 	return 0;
 }
@@ -338,7 +343,7 @@ static struct mdk_personality faulty_personality =
 	.run		= run,
 	.stop		= stop,
 	.status		= status,
-	.reconfig	= reconfig,
+	.check_reshape	= reshape,
 	.size		= faulty_size,
 };
 
diff --git a/drivers/md/linear.c b/drivers/md/linear.c
index 64f1f3e046e..15c8b7b25a9 100644
--- a/drivers/md/linear.c
+++ b/drivers/md/linear.c
@@ -27,19 +27,27 @@
  */
 static inline dev_info_t *which_dev(mddev_t *mddev, sector_t sector)
 {
-	dev_info_t *hash;
-	linear_conf_t *conf = mddev_to_conf(mddev);
-	sector_t idx = sector >> conf->sector_shift;
+	int lo, mid, hi;
+	linear_conf_t *conf;
+
+	lo = 0;
+	hi = mddev->raid_disks - 1;
+	conf = rcu_dereference(mddev->private);
 
 	/*
-	 * sector_div(a,b) returns the remainer and sets a to a/b
+	 * Binary Search
 	 */
-	(void)sector_div(idx, conf->spacing);
-	hash = conf->hash_table[idx];
 
-	while (sector >= hash->num_sectors + hash->start_sector)
-		hash++;
-	return hash;
+	while (hi > lo) {
+
+		mid = (hi + lo) / 2;
+		if (sector < conf->disks[mid].end_sector)
+			hi = mid;
+		else
+			lo = mid + 1;
+	}
+
+	return conf->disks + lo;
 }
 
 /**
@@ -59,8 +67,10 @@ static int linear_mergeable_bvec(struct request_queue *q,
 	unsigned long maxsectors, bio_sectors = bvm->bi_size >> 9;
 	sector_t sector = bvm->bi_sector + get_start_sect(bvm->bi_bdev);
 
+	rcu_read_lock();
 	dev0 = which_dev(mddev, sector);
-	maxsectors = dev0->num_sectors - (sector - dev0->start_sector);
+	maxsectors = dev0->end_sector - sector;
+	rcu_read_unlock();
 
 	if (maxsectors < bio_sectors)
 		maxsectors = 0;
@@ -79,46 +89,57 @@ static int linear_mergeable_bvec(struct request_queue *q,
 static void linear_unplug(struct request_queue *q)
 {
 	mddev_t *mddev = q->queuedata;
-	linear_conf_t *conf = mddev_to_conf(mddev);
+	linear_conf_t *conf;
 	int i;
 
+	rcu_read_lock();
+	conf = rcu_dereference(mddev->private);
+
 	for (i=0; i < mddev->raid_disks; i++) {
 		struct request_queue *r_queue = bdev_get_queue(conf->disks[i].rdev->bdev);
 		blk_unplug(r_queue);
 	}
+	rcu_read_unlock();
 }
 
 static int linear_congested(void *data, int bits)
 {
 	mddev_t *mddev = data;
-	linear_conf_t *conf = mddev_to_conf(mddev);
+	linear_conf_t *conf;
 	int i, ret = 0;
 
+	rcu_read_lock();
+	conf = rcu_dereference(mddev->private);
+
 	for (i = 0; i < mddev->raid_disks && !ret ; i++) {
 		struct request_queue *q = bdev_get_queue(conf->disks[i].rdev->bdev);
 		ret |= bdi_congested(&q->backing_dev_info, bits);
 	}
+
+	rcu_read_unlock();
 	return ret;
 }
 
 static sector_t linear_size(mddev_t *mddev, sector_t sectors, int raid_disks)
 {
-	linear_conf_t *conf = mddev_to_conf(mddev);
+	linear_conf_t *conf;
+	sector_t array_sectors;
 
+	rcu_read_lock();
+	conf = rcu_dereference(mddev->private);
 	WARN_ONCE(sectors || raid_disks,
 		  "%s does not support generic reshape\n", __func__);
+	array_sectors = conf->array_sectors;
+	rcu_read_unlock();
 
-	return conf->array_sectors;
+	return array_sectors;
 }
 
 static linear_conf_t *linear_conf(mddev_t *mddev, int raid_disks)
 {
 	linear_conf_t *conf;
-	dev_info_t **table;
 	mdk_rdev_t *rdev;
-	int i, nb_zone, cnt;
-	sector_t min_sectors;
-	sector_t curr_sector;
+	int i, cnt;
 
 	conf = kzalloc (sizeof (*conf) + raid_disks*sizeof(dev_info_t),
 			GFP_KERNEL);
@@ -131,6 +152,7 @@ static linear_conf_t *linear_conf(mddev_t *mddev, int raid_disks)
 	list_for_each_entry(rdev, &mddev->disks, same_set) {
 		int j = rdev->raid_disk;
 		dev_info_t *disk = conf->disks + j;
+		sector_t sectors;
 
 		if (j < 0 || j >= raid_disks || disk->rdev) {
 			printk("linear: disk numbering problem. Aborting!\n");
@@ -138,6 +160,11 @@ static linear_conf_t *linear_conf(mddev_t *mddev, int raid_disks)
 		}
 
 		disk->rdev = rdev;
+		if (mddev->chunk_sectors) {
+			sectors = rdev->sectors;
+			sector_div(sectors, mddev->chunk_sectors);
+			rdev->sectors = sectors * mddev->chunk_sectors;
+		}
 
 		blk_queue_stack_limits(mddev->queue,
 				       rdev->bdev->bd_disk->queue);
@@ -149,102 +176,24 @@ static linear_conf_t *linear_conf(mddev_t *mddev, int raid_disks)
 		    queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9))
 			blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9);
 
-		disk->num_sectors = rdev->sectors;
 		conf->array_sectors += rdev->sectors;
-
 		cnt++;
+
 	}
 	if (cnt != raid_disks) {
 		printk("linear: not enough drives present. Aborting!\n");
 		goto out;
 	}
 
-	min_sectors = conf->array_sectors;
-	sector_div(min_sectors, PAGE_SIZE/sizeof(struct dev_info *));
-	if (min_sectors == 0)
-		min_sectors = 1;
-
-	/* min_sectors is the minimum spacing that will fit the hash
-	 * table in one PAGE.  This may be much smaller than needed.
-	 * We find the smallest non-terminal set of consecutive devices
-	 * that is larger than min_sectors and use the size of that as
-	 * the actual spacing
-	 */
-	conf->spacing = conf->array_sectors;
-	for (i=0; i < cnt-1 ; i++) {
-		sector_t tmp = 0;
-		int j;
-		for (j = i; j < cnt - 1 && tmp < min_sectors; j++)
-			tmp += conf->disks[j].num_sectors;
-		if (tmp >= min_sectors && tmp < conf->spacing)
-			conf->spacing = tmp;
-	}
-
-	/* spacing may be too large for sector_div to work with,
-	 * so we might need to pre-shift
-	 */
-	conf->sector_shift = 0;
-	if (sizeof(sector_t) > sizeof(u32)) {
-		sector_t space = conf->spacing;
-		while (space > (sector_t)(~(u32)0)) {
-			space >>= 1;
-			conf->sector_shift++;
-		}
-	}
 	/*
-	 * This code was restructured to work around a gcc-2.95.3 internal
-	 * compiler error.  Alter it with care.
+	 * Here we calculate the device offsets.
 	 */
-	{
-		sector_t sz;
-		unsigned round;
-		unsigned long base;
-
-		sz = conf->array_sectors >> conf->sector_shift;
-		sz += 1; /* force round-up */
-		base = conf->spacing >> conf->sector_shift;
-		round = sector_div(sz, base);
-		nb_zone = sz + (round ? 1 : 0);
-	}
-	BUG_ON(nb_zone > PAGE_SIZE / sizeof(struct dev_info *));
-
-	conf->hash_table = kmalloc (sizeof (struct dev_info *) * nb_zone,
-					GFP_KERNEL);
-	if (!conf->hash_table)
-		goto out;
+	conf->disks[0].end_sector = conf->disks[0].rdev->sectors;
 
-	/*
-	 * Here we generate the linear hash table
-	 * First calculate the device offsets.
-	 */
-	conf->disks[0].start_sector = 0;
 	for (i = 1; i < raid_disks; i++)
-		conf->disks[i].start_sector =
-			conf->disks[i-1].start_sector +
-			conf->disks[i-1].num_sectors;
-
-	table = conf->hash_table;
-	i = 0;
-	for (curr_sector = 0;
-	     curr_sector < conf->array_sectors;
-	     curr_sector += conf->spacing) {
-
-		while (i < raid_disks-1 &&
-		       curr_sector >= conf->disks[i+1].start_sector)
-			i++;
-
-		*table ++ = conf->disks + i;
-	}
-
-	if (conf->sector_shift) {
-		conf->spacing >>= conf->sector_shift;
-		/* round spacing up so that when we divide by it,
-		 * we err on the side of "too-low", which is safest.
-		 */
-		conf->spacing++;
-	}
-
-	BUG_ON(table - conf->hash_table > nb_zone);
+		conf->disks[i].end_sector =
+			conf->disks[i-1].end_sector +
+			conf->disks[i].rdev->sectors;
 
 	return conf;
 
@@ -257,6 +206,8 @@ static int linear_run (mddev_t *mddev)
 {
 	linear_conf_t *conf;
 
+	if (md_check_no_bitmap(mddev))
+		return -EINVAL;
 	mddev->queue->queue_lock = &mddev->queue->__queue_lock;
 	conf = linear_conf(mddev, mddev->raid_disks);
 
@@ -272,6 +223,12 @@ static int linear_run (mddev_t *mddev)
 	return 0;
 }
 
+static void free_conf(struct rcu_head *head)
+{
+	linear_conf_t *conf = container_of(head, linear_conf_t, rcu);
+	kfree(conf);
+}
+
 static int linear_add(mddev_t *mddev, mdk_rdev_t *rdev)
 {
 	/* Adding a drive to a linear array allows the array to grow.
@@ -282,7 +239,7 @@ static int linear_add(mddev_t *mddev, mdk_rdev_t *rdev)
 	 * The current one is never freed until the array is stopped.
 	 * This avoids races.
 	 */
-	linear_conf_t *newconf;
+	linear_conf_t *newconf, *oldconf;
 
 	if (rdev->saved_raid_disk != mddev->raid_disks)
 		return -EINVAL;
@@ -294,25 +251,29 @@ static int linear_add(mddev_t *mddev, mdk_rdev_t *rdev)
 	if (!newconf)
 		return -ENOMEM;
 
-	newconf->prev = mddev_to_conf(mddev);
-	mddev->private = newconf;
+	oldconf = rcu_dereference(mddev->private);
 	mddev->raid_disks++;
+	rcu_assign_pointer(mddev->private, newconf);
 	md_set_array_sectors(mddev, linear_size(mddev, 0, 0));
 	set_capacity(mddev->gendisk, mddev->array_sectors);
+	call_rcu(&oldconf->rcu, free_conf);
 	return 0;
 }
 
 static int linear_stop (mddev_t *mddev)
 {
-	linear_conf_t *conf = mddev_to_conf(mddev);
-  
+	linear_conf_t *conf = mddev->private;
+
+	/*
+	 * We do not require rcu protection here since
+	 * we hold reconfig_mutex for both linear_add and
+	 * linear_stop, so they cannot race.
+	 * We should make sure any old 'conf's are properly
+	 * freed though.
+	 */
+	rcu_barrier();
 	blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/
-	do {
-		linear_conf_t *t = conf->prev;
-		kfree(conf->hash_table);
-		kfree(conf);
-		conf = t;
-	} while (conf);
+	kfree(conf);
 
 	return 0;
 }
@@ -322,6 +283,7 @@ static int linear_make_request (struct request_queue *q, struct bio *bio)
 	const int rw = bio_data_dir(bio);
 	mddev_t *mddev = q->queuedata;
 	dev_info_t *tmp_dev;
+	sector_t start_sector;
 	int cpu;
 
 	if (unlikely(bio_barrier(bio))) {
@@ -335,33 +297,36 @@ static int linear_make_request (struct request_queue *q, struct bio *bio)
 		      bio_sectors(bio));
 	part_stat_unlock();
 
+	rcu_read_lock();
 	tmp_dev = which_dev(mddev, bio->bi_sector);
-    
-	if (unlikely(bio->bi_sector >= (tmp_dev->num_sectors +
-					tmp_dev->start_sector)
-		     || (bio->bi_sector <
-			 tmp_dev->start_sector))) {
+	start_sector = tmp_dev->end_sector - tmp_dev->rdev->sectors;
+
+
+	if (unlikely(bio->bi_sector >= (tmp_dev->end_sector)
+		     || (bio->bi_sector < start_sector))) {
 		char b[BDEVNAME_SIZE];
 
 		printk("linear_make_request: Sector %llu out of bounds on "
 			"dev %s: %llu sectors, offset %llu\n",
 			(unsigned long long)bio->bi_sector,
 			bdevname(tmp_dev->rdev->bdev, b),
-			(unsigned long long)tmp_dev->num_sectors,
-			(unsigned long long)tmp_dev->start_sector);
+			(unsigned long long)tmp_dev->rdev->sectors,
+			(unsigned long long)start_sector);
+		rcu_read_unlock();
 		bio_io_error(bio);
 		return 0;
 	}
 	if (unlikely(bio->bi_sector + (bio->bi_size >> 9) >
-		     tmp_dev->start_sector + tmp_dev->num_sectors)) {
+		     tmp_dev->end_sector)) {
 		/* This bio crosses a device boundary, so we have to
 		 * split it.
 		 */
 		struct bio_pair *bp;
+		sector_t end_sector = tmp_dev->end_sector;
+
+		rcu_read_unlock();
 
-		bp = bio_split(bio,
-			       tmp_dev->start_sector + tmp_dev->num_sectors
-			       - bio->bi_sector);
+		bp = bio_split(bio, end_sector - bio->bi_sector);
 
 		if (linear_make_request(q, &bp->bio1))
 			generic_make_request(&bp->bio1);
@@ -372,8 +337,9 @@ static int linear_make_request (struct request_queue *q, struct bio *bio)
 	}
 		    
 	bio->bi_bdev = tmp_dev->rdev->bdev;
-	bio->bi_sector = bio->bi_sector - tmp_dev->start_sector
+	bio->bi_sector = bio->bi_sector - start_sector
 		+ tmp_dev->rdev->data_offset;
+	rcu_read_unlock();
 
 	return 1;
 }
@@ -381,7 +347,7 @@ static int linear_make_request (struct request_queue *q, struct bio *bio)
 static void linear_status (struct seq_file *seq, mddev_t *mddev)
 {
 
-	seq_printf(seq, " %dk rounding", mddev->chunk_size/1024);
+	seq_printf(seq, " %dk rounding", mddev->chunk_sectors / 2);
 }
 
 
diff --git a/drivers/md/linear.h b/drivers/md/linear.h
index bf8179587f9..0ce29b61605 100644
--- a/drivers/md/linear.h
+++ b/drivers/md/linear.h
@@ -3,27 +3,19 @@
 
 struct dev_info {
 	mdk_rdev_t	*rdev;
-	sector_t	num_sectors;
-	sector_t	start_sector;
+	sector_t	end_sector;
 };
 
 typedef struct dev_info dev_info_t;
 
 struct linear_private_data
 {
-	struct linear_private_data *prev;	/* earlier version */
-	dev_info_t		**hash_table;
-	sector_t		spacing;
 	sector_t		array_sectors;
-	int			sector_shift;	/* shift before dividing
-						 * by spacing
-						 */
 	dev_info_t		disks[0];
+	struct rcu_head		rcu;
 };
 
 
 typedef struct linear_private_data linear_conf_t;
 
-#define mddev_to_conf(mddev) ((linear_conf_t *) mddev->private)
-
 #endif
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 20f6ac33834..09be637d52c 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -440,15 +440,6 @@ static inline sector_t calc_dev_sboffset(struct block_device *bdev)
 	return MD_NEW_SIZE_SECTORS(num_sectors);
 }
 
-static sector_t calc_num_sectors(mdk_rdev_t *rdev, unsigned chunk_size)
-{
-	sector_t num_sectors = rdev->sb_start;
-
-	if (chunk_size)
-		num_sectors &= ~((sector_t)chunk_size/512 - 1);
-	return num_sectors;
-}
-
 static int alloc_disk_sb(mdk_rdev_t * rdev)
 {
 	if (rdev->sb_page)
@@ -745,6 +736,24 @@ struct super_type  {
 };
 
 /*
+ * Check that the given mddev has no bitmap.
+ *
+ * This function is called from the run method of all personalities that do not
+ * support bitmaps. It prints an error message and returns non-zero if mddev
+ * has a bitmap. Otherwise, it returns 0.
+ *
+ */
+int md_check_no_bitmap(mddev_t *mddev)
+{
+	if (!mddev->bitmap_file && !mddev->bitmap_offset)
+		return 0;
+	printk(KERN_ERR "%s: bitmaps are not supported for %s\n",
+		mdname(mddev), mddev->pers->name);
+	return 1;
+}
+EXPORT_SYMBOL(md_check_no_bitmap);
+
+/*
  * load_super for 0.90.0 
  */
 static int super_90_load(mdk_rdev_t *rdev, mdk_rdev_t *refdev, int minor_version)
@@ -797,17 +806,6 @@ static int super_90_load(mdk_rdev_t *rdev, mdk_rdev_t *refdev, int minor_version
 	rdev->data_offset = 0;
 	rdev->sb_size = MD_SB_BYTES;
 
-	if (sb->state & (1<<MD_SB_BITMAP_PRESENT)) {
-		if (sb->level != 1 && sb->level != 4
-		    && sb->level != 5 && sb->level != 6
-		    && sb->level != 10) {
-			/* FIXME use a better test */
-			printk(KERN_WARNING
-			       "md: bitmaps not supported for this level.\n");
-			goto abort;
-		}
-	}
-
 	if (sb->level == LEVEL_MULTIPATH)
 		rdev->desc_nr = -1;
 	else
@@ -836,7 +834,7 @@ static int super_90_load(mdk_rdev_t *rdev, mdk_rdev_t *refdev, int minor_version
 		else 
 			ret = 0;
 	}
-	rdev->sectors = calc_num_sectors(rdev, sb->chunk_size);
+	rdev->sectors = rdev->sb_start;
 
 	if (rdev->sectors < sb->size * 2 && sb->level > 1)
 		/* "this cannot possibly happen" ... */
@@ -866,7 +864,7 @@ static int super_90_validate(mddev_t *mddev, mdk_rdev_t *rdev)
 		mddev->minor_version = sb->minor_version;
 		mddev->patch_version = sb->patch_version;
 		mddev->external = 0;
-		mddev->chunk_size = sb->chunk_size;
+		mddev->chunk_sectors = sb->chunk_size >> 9;
 		mddev->ctime = sb->ctime;
 		mddev->utime = sb->utime;
 		mddev->level = sb->level;
@@ -883,13 +881,13 @@ static int super_90_validate(mddev_t *mddev, mdk_rdev_t *rdev)
 			mddev->delta_disks = sb->delta_disks;
 			mddev->new_level = sb->new_level;
 			mddev->new_layout = sb->new_layout;
-			mddev->new_chunk = sb->new_chunk;
+			mddev->new_chunk_sectors = sb->new_chunk >> 9;
 		} else {
 			mddev->reshape_position = MaxSector;
 			mddev->delta_disks = 0;
 			mddev->new_level = mddev->level;
 			mddev->new_layout = mddev->layout;
-			mddev->new_chunk = mddev->chunk_size;
+			mddev->new_chunk_sectors = mddev->chunk_sectors;
 		}
 
 		if (sb->state & (1<<MD_SB_CLEAN))
@@ -1004,7 +1002,7 @@ static void super_90_sync(mddev_t *mddev, mdk_rdev_t *rdev)
 		sb->new_level = mddev->new_level;
 		sb->delta_disks = mddev->delta_disks;
 		sb->new_layout = mddev->new_layout;
-		sb->new_chunk = mddev->new_chunk;
+		sb->new_chunk = mddev->new_chunk_sectors << 9;
 	}
 	mddev->minor_version = sb->minor_version;
 	if (mddev->in_sync)
@@ -1018,7 +1016,7 @@ static void super_90_sync(mddev_t *mddev, mdk_rdev_t *rdev)
 		sb->recovery_cp = 0;
 
 	sb->layout = mddev->layout;
-	sb->chunk_size = mddev->chunk_size;
+	sb->chunk_size = mddev->chunk_sectors << 9;
 
 	if (mddev->bitmap && mddev->bitmap_file == NULL)
 		sb->state |= (1<<MD_SB_BITMAP_PRESENT);
@@ -1185,17 +1183,6 @@ static int super_1_load(mdk_rdev_t *rdev, mdk_rdev_t *refdev, int minor_version)
 		       bdevname(rdev->bdev,b));
 		return -EINVAL;
 	}
-	if ((le32_to_cpu(sb->feature_map) & MD_FEATURE_BITMAP_OFFSET)) {
-		if (sb->level != cpu_to_le32(1) &&
-		    sb->level != cpu_to_le32(4) &&
-		    sb->level != cpu_to_le32(5) &&
-		    sb->level != cpu_to_le32(6) &&
-		    sb->level != cpu_to_le32(10)) {
-			printk(KERN_WARNING
-			       "md: bitmaps not supported for this level.\n");
-			return -EINVAL;
-		}
-	}
 
 	rdev->preferred_minor = 0xffff;
 	rdev->data_offset = le64_to_cpu(sb->data_offset);
@@ -1248,9 +1235,6 @@ static int super_1_load(mdk_rdev_t *rdev, mdk_rdev_t *refdev, int minor_version)
 	if (rdev->sectors < le64_to_cpu(sb->data_size))
 		return -EINVAL;
 	rdev->sectors = le64_to_cpu(sb->data_size);
-	if (le32_to_cpu(sb->chunksize))
-		rdev->sectors &= ~((sector_t)le32_to_cpu(sb->chunksize) - 1);
-
 	if (le64_to_cpu(sb->size) > rdev->sectors)
 		return -EINVAL;
 	return ret;
@@ -1271,7 +1255,7 @@ static int super_1_validate(mddev_t *mddev, mdk_rdev_t *rdev)
 		mddev->major_version = 1;
 		mddev->patch_version = 0;
 		mddev->external = 0;
-		mddev->chunk_size = le32_to_cpu(sb->chunksize) << 9;
+		mddev->chunk_sectors = le32_to_cpu(sb->chunksize);
 		mddev->ctime = le64_to_cpu(sb->ctime) & ((1ULL << 32)-1);
 		mddev->utime = le64_to_cpu(sb->utime) & ((1ULL << 32)-1);
 		mddev->level = le32_to_cpu(sb->level);
@@ -1297,13 +1281,13 @@ static int super_1_validate(mddev_t *mddev, mdk_rdev_t *rdev)
 			mddev->delta_disks = le32_to_cpu(sb->delta_disks);
 			mddev->new_level = le32_to_cpu(sb->new_level);
 			mddev->new_layout = le32_to_cpu(sb->new_layout);
-			mddev->new_chunk = le32_to_cpu(sb->new_chunk)<<9;
+			mddev->new_chunk_sectors = le32_to_cpu(sb->new_chunk);
 		} else {
 			mddev->reshape_position = MaxSector;
 			mddev->delta_disks = 0;
 			mddev->new_level = mddev->level;
 			mddev->new_layout = mddev->layout;
-			mddev->new_chunk = mddev->chunk_size;
+			mddev->new_chunk_sectors = mddev->chunk_sectors;
 		}
 
 	} else if (mddev->pers == NULL) {
@@ -1375,7 +1359,7 @@ static void super_1_sync(mddev_t *mddev, mdk_rdev_t *rdev)
 
 	sb->raid_disks = cpu_to_le32(mddev->raid_disks);
 	sb->size = cpu_to_le64(mddev->dev_sectors);
-	sb->chunksize = cpu_to_le32(mddev->chunk_size >> 9);
+	sb->chunksize = cpu_to_le32(mddev->chunk_sectors);
 	sb->level = cpu_to_le32(mddev->level);
 	sb->layout = cpu_to_le32(mddev->layout);
 
@@ -1402,7 +1386,7 @@ static void super_1_sync(mddev_t *mddev, mdk_rdev_t *rdev)
 		sb->new_layout = cpu_to_le32(mddev->new_layout);
 		sb->delta_disks = cpu_to_le32(mddev->delta_disks);
 		sb->new_level = cpu_to_le32(mddev->new_level);
-		sb->new_chunk = cpu_to_le32(mddev->new_chunk>>9);
+		sb->new_chunk = cpu_to_le32(mddev->new_chunk_sectors);
 	}
 
 	max_dev = 0;
@@ -1897,6 +1881,7 @@ static void md_update_sb(mddev_t * mddev, int force_change)
 	int sync_req;
 	int nospares = 0;
 
+	mddev->utime = get_seconds();
 	if (mddev->external)
 		return;
 repeat:
@@ -1926,7 +1911,6 @@ repeat:
 		nospares = 0;
 
 	sync_req = mddev->in_sync;
-	mddev->utime = get_seconds();
 
 	/* If this is just a dirty<->clean transition, and the array is clean
 	 * and 'events' is odd, we can roll back to the previous clean state */
@@ -2597,15 +2581,6 @@ static void analyze_sbs(mddev_t * mddev)
 			clear_bit(In_sync, &rdev->flags);
 		}
 	}
-
-
-
-	if (mddev->recovery_cp != MaxSector &&
-	    mddev->level >= 1)
-		printk(KERN_ERR "md: %s: raid array is not clean"
-		       " -- starting background reconstruction\n",
-		       mdname(mddev));
-
 }
 
 static void md_safemode_timeout(unsigned long data);
@@ -2746,7 +2721,7 @@ level_store(mddev_t *mddev, const char *buf, size_t len)
 	if (IS_ERR(priv)) {
 		mddev->new_level = mddev->level;
 		mddev->new_layout = mddev->layout;
-		mddev->new_chunk = mddev->chunk_size;
+		mddev->new_chunk_sectors = mddev->chunk_sectors;
 		mddev->raid_disks -= mddev->delta_disks;
 		mddev->delta_disks = 0;
 		module_put(pers->owner);
@@ -2764,7 +2739,7 @@ level_store(mddev_t *mddev, const char *buf, size_t len)
 	strlcpy(mddev->clevel, pers->name, sizeof(mddev->clevel));
 	mddev->level = mddev->new_level;
 	mddev->layout = mddev->new_layout;
-	mddev->chunk_size = mddev->new_chunk;
+	mddev->chunk_sectors = mddev->new_chunk_sectors;
 	mddev->delta_disks = 0;
 	pers->run(mddev);
 	mddev_resume(mddev);
@@ -2800,11 +2775,14 @@ layout_store(mddev_t *mddev, const char *buf, size_t len)
 
 	if (mddev->pers) {
 		int err;
-		if (mddev->pers->reconfig == NULL)
+		if (mddev->pers->check_reshape == NULL)
 			return -EBUSY;
-		err = mddev->pers->reconfig(mddev, n, -1);
-		if (err)
+		mddev->new_layout = n;
+		err = mddev->pers->check_reshape(mddev);
+		if (err) {
+			mddev->new_layout = mddev->layout;
 			return err;
+		}
 	} else {
 		mddev->new_layout = n;
 		if (mddev->reshape_position == MaxSector)
@@ -2857,10 +2835,11 @@ static ssize_t
 chunk_size_show(mddev_t *mddev, char *page)
 {
 	if (mddev->reshape_position != MaxSector &&
-	    mddev->chunk_size != mddev->new_chunk)
-		return sprintf(page, "%d (%d)\n", mddev->new_chunk,
-			       mddev->chunk_size);
-	return sprintf(page, "%d\n", mddev->chunk_size);
+	    mddev->chunk_sectors != mddev->new_chunk_sectors)
+		return sprintf(page, "%d (%d)\n",
+			       mddev->new_chunk_sectors << 9,
+			       mddev->chunk_sectors << 9);
+	return sprintf(page, "%d\n", mddev->chunk_sectors << 9);
 }
 
 static ssize_t
@@ -2874,15 +2853,18 @@ chunk_size_store(mddev_t *mddev, const char *buf, size_t len)
 
 	if (mddev->pers) {
 		int err;
-		if (mddev->pers->reconfig == NULL)
+		if (mddev->pers->check_reshape == NULL)
 			return -EBUSY;
-		err = mddev->pers->reconfig(mddev, -1, n);
-		if (err)
+		mddev->new_chunk_sectors = n >> 9;
+		err = mddev->pers->check_reshape(mddev);
+		if (err) {
+			mddev->new_chunk_sectors = mddev->chunk_sectors;
 			return err;
+		}
 	} else {
-		mddev->new_chunk = n;
+		mddev->new_chunk_sectors = n >> 9;
 		if (mddev->reshape_position == MaxSector)
-			mddev->chunk_size = n;
+			mddev->chunk_sectors = n >> 9;
 	}
 	return len;
 }
@@ -3527,8 +3509,9 @@ min_sync_store(mddev_t *mddev, const char *buf, size_t len)
 		return -EBUSY;
 
 	/* Must be a multiple of chunk_size */
-	if (mddev->chunk_size) {
-		if (min & (sector_t)((mddev->chunk_size>>9)-1))
+	if (mddev->chunk_sectors) {
+		sector_t temp = min;
+		if (sector_div(temp, mddev->chunk_sectors))
 			return -EINVAL;
 	}
 	mddev->resync_min = min;
@@ -3564,8 +3547,9 @@ max_sync_store(mddev_t *mddev, const char *buf, size_t len)
 			return -EBUSY;
 
 		/* Must be a multiple of chunk_size */
-		if (mddev->chunk_size) {
-			if (max & (sector_t)((mddev->chunk_size>>9)-1))
+		if (mddev->chunk_sectors) {
+			sector_t temp = max;
+			if (sector_div(temp, mddev->chunk_sectors))
 				return -EINVAL;
 		}
 		mddev->resync_max = max;
@@ -3656,7 +3640,7 @@ reshape_position_store(mddev_t *mddev, const char *buf, size_t len)
 	mddev->delta_disks = 0;
 	mddev->new_level = mddev->level;
 	mddev->new_layout = mddev->layout;
-	mddev->new_chunk = mddev->chunk_size;
+	mddev->new_chunk_sectors = mddev->chunk_sectors;
 	return len;
 }
 
@@ -3976,11 +3960,9 @@ static int start_dirty_degraded;
 static int do_md_run(mddev_t * mddev)
 {
 	int err;
-	int chunk_size;
 	mdk_rdev_t *rdev;
 	struct gendisk *disk;
 	struct mdk_personality *pers;
-	char b[BDEVNAME_SIZE];
 
 	if (list_empty(&mddev->disks))
 		/* cannot run an array with no devices.. */
@@ -3998,38 +3980,6 @@ static int do_md_run(mddev_t * mddev)
 		analyze_sbs(mddev);
 	}
 
-	chunk_size = mddev->chunk_size;
-
-	if (chunk_size) {
-		if (chunk_size > MAX_CHUNK_SIZE) {
-			printk(KERN_ERR "too big chunk_size: %d > %d\n",
-				chunk_size, MAX_CHUNK_SIZE);
-			return -EINVAL;
-		}
-		/*
-		 * chunk-size has to be a power of 2
-		 */
-		if ( (1 << ffz(~chunk_size)) != chunk_size) {
-			printk(KERN_ERR "chunk_size of %d not valid\n", chunk_size);
-			return -EINVAL;
-		}
-
-		/* devices must have minimum size of one chunk */
-		list_for_each_entry(rdev, &mddev->disks, same_set) {
-			if (test_bit(Faulty, &rdev->flags))
-				continue;
-			if (rdev->sectors < chunk_size / 512) {
-				printk(KERN_WARNING
-					"md: Dev %s smaller than chunk_size:"
-					" %llu < %d\n",
-					bdevname(rdev->bdev,b),
-					(unsigned long long)rdev->sectors,
-					chunk_size / 512);
-				return -EINVAL;
-			}
-		}
-	}
-
 	if (mddev->level != LEVEL_NONE)
 		request_module("md-level-%d", mddev->level);
 	else if (mddev->clevel[0])
@@ -4405,7 +4355,7 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
 		mddev->flags = 0;
 		mddev->ro = 0;
 		mddev->metadata_type[0] = 0;
-		mddev->chunk_size = 0;
+		mddev->chunk_sectors = 0;
 		mddev->ctime = mddev->utime = 0;
 		mddev->layout = 0;
 		mddev->max_disks = 0;
@@ -4413,7 +4363,7 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
 		mddev->delta_disks = 0;
 		mddev->new_level = LEVEL_NONE;
 		mddev->new_layout = 0;
-		mddev->new_chunk = 0;
+		mddev->new_chunk_sectors = 0;
 		mddev->curr_resync = 0;
 		mddev->resync_mismatches = 0;
 		mddev->suspend_lo = mddev->suspend_hi = 0;
@@ -4618,7 +4568,7 @@ static int get_array_info(mddev_t * mddev, void __user * arg)
 	info.spare_disks   = spare;
 
 	info.layout        = mddev->layout;
-	info.chunk_size    = mddev->chunk_size;
+	info.chunk_size    = mddev->chunk_sectors << 9;
 
 	if (copy_to_user(arg, &info, sizeof(info)))
 		return -EFAULT;
@@ -4843,7 +4793,7 @@ static int add_new_disk(mddev_t * mddev, mdu_disk_info_t *info)
 			rdev->sb_start = rdev->bdev->bd_inode->i_size / 512;
 		} else 
 			rdev->sb_start = calc_dev_sboffset(rdev->bdev);
-		rdev->sectors = calc_num_sectors(rdev, mddev->chunk_size);
+		rdev->sectors = rdev->sb_start;
 
 		err = bind_rdev_to_array(rdev, mddev);
 		if (err) {
@@ -4913,7 +4863,7 @@ static int hot_add_disk(mddev_t * mddev, dev_t dev)
 	else
 		rdev->sb_start = rdev->bdev->bd_inode->i_size / 512;
 
-	rdev->sectors = calc_num_sectors(rdev, mddev->chunk_size);
+	rdev->sectors = rdev->sb_start;
 
 	if (test_bit(Faulty, &rdev->flags)) {
 		printk(KERN_WARNING 
@@ -5062,7 +5012,7 @@ static int set_array_info(mddev_t * mddev, mdu_array_info_t *info)
 	mddev->external	     = 0;
 
 	mddev->layout        = info->layout;
-	mddev->chunk_size    = info->chunk_size;
+	mddev->chunk_sectors = info->chunk_size >> 9;
 
 	mddev->max_disks     = MD_SB_DISKS;
 
@@ -5081,7 +5031,7 @@ static int set_array_info(mddev_t * mddev, mdu_array_info_t *info)
 	get_random_bytes(mddev->uuid, 16);
 
 	mddev->new_level = mddev->level;
-	mddev->new_chunk = mddev->chunk_size;
+	mddev->new_chunk_sectors = mddev->chunk_sectors;
 	mddev->new_layout = mddev->layout;
 	mddev->delta_disks = 0;
 
@@ -5191,7 +5141,7 @@ static int update_array_info(mddev_t *mddev, mdu_array_info_t *info)
 	    mddev->level         != info->level         ||
 /*	    mddev->layout        != info->layout        || */
 	    !mddev->persistent	 != info->not_persistent||
-	    mddev->chunk_size    != info->chunk_size    ||
+	    mddev->chunk_sectors != info->chunk_size >> 9 ||
 	    /* ignore bottom 8 bits of state, and allow SB_BITMAP_PRESENT to change */
 	    ((state^info->state) & 0xfffffe00)
 		)
@@ -5215,10 +5165,15 @@ static int update_array_info(mddev_t *mddev, mdu_array_info_t *info)
 		 * we don't need to do anything at the md level, the
 		 * personality will take care of it all.
 		 */
-		if (mddev->pers->reconfig == NULL)
+		if (mddev->pers->check_reshape == NULL)
 			return -EINVAL;
-		else
-			return mddev->pers->reconfig(mddev, info->layout, -1);
+		else {
+			mddev->new_layout = info->layout;
+			rv = mddev->pers->check_reshape(mddev);
+			if (rv)
+				mddev->new_layout = mddev->layout;
+			return rv;
+		}
 	}
 	if (info->size >= 0 && mddev->dev_sectors / 2 != info->size)
 		rv = update_size(mddev, (sector_t)info->size * 2);
@@ -6717,7 +6672,8 @@ void md_check_recovery(mddev_t *mddev)
 		 */
 
 		if (mddev->reshape_position != MaxSector) {
-			if (mddev->pers->check_reshape(mddev) != 0)
+			if (mddev->pers->check_reshape == NULL ||
+			    mddev->pers->check_reshape(mddev) != 0)
 				/* Cannot proceed */
 				goto unlock;
 			set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 8227ab909d4..9430a110db9 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -30,13 +30,6 @@ typedef struct mddev_s mddev_t;
 typedef struct mdk_rdev_s mdk_rdev_t;
 
 /*
- * options passed in raidrun:
- */
-
-/* Currently this must fit in an 'int' */
-#define MAX_CHUNK_SIZE (1<<30)
-
-/*
  * MD's 'extended' device
  */
 struct mdk_rdev_s
@@ -145,7 +138,7 @@ struct mddev_s
 	int 				external;	/* metadata is
 							 * managed externally */
 	char				metadata_type[17]; /* externally set*/
-	int				chunk_size;
+	int				chunk_sectors;
 	time_t				ctime, utime;
 	int				level, layout;
 	char				clevel[16];
@@ -166,7 +159,8 @@ struct mddev_s
 	 * If reshape_position is MaxSector, then no reshape is happening (yet).
 	 */
 	sector_t			reshape_position;
-	int				delta_disks, new_level, new_layout, new_chunk;
+	int				delta_disks, new_level, new_layout;
+	int				new_chunk_sectors;
 
 	struct mdk_thread_s		*thread;	/* management thread */
 	struct mdk_thread_s		*sync_thread;	/* doing resync or reconstruct */
@@ -325,7 +319,6 @@ struct mdk_personality
 	int (*check_reshape) (mddev_t *mddev);
 	int (*start_reshape) (mddev_t *mddev);
 	void (*finish_reshape) (mddev_t *mddev);
-	int (*reconfig) (mddev_t *mddev, int layout, int chunk_size);
 	/* quiesce moves between quiescence states
 	 * 0 - fully active
 	 * 1 - no new requests allowed
@@ -437,5 +430,6 @@ extern void md_new_event(mddev_t *mddev);
 extern int md_allow_write(mddev_t *mddev);
 extern void md_wait_for_blocked_rdev(mdk_rdev_t *rdev, mddev_t *mddev);
 extern void md_set_array_sectors(mddev_t *mddev, sector_t array_sectors);
+extern int md_check_no_bitmap(mddev_t *mddev);
 
 #endif /* _MD_MD_H */
diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c
index 4ee31aa13c4..cbe368fa659 100644
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -58,7 +58,7 @@ static void multipath_reschedule_retry (struct multipath_bh *mp_bh)
 {
 	unsigned long flags;
 	mddev_t *mddev = mp_bh->mddev;
-	multipath_conf_t *conf = mddev_to_conf(mddev);
+	multipath_conf_t *conf = mddev->private;
 
 	spin_lock_irqsave(&conf->device_lock, flags);
 	list_add(&mp_bh->retry_list, &conf->retry_list);
@@ -75,7 +75,7 @@ static void multipath_reschedule_retry (struct multipath_bh *mp_bh)
 static void multipath_end_bh_io (struct multipath_bh *mp_bh, int err)
 {
 	struct bio *bio = mp_bh->master_bio;
-	multipath_conf_t *conf = mddev_to_conf(mp_bh->mddev);
+	multipath_conf_t *conf = mp_bh->mddev->private;
 
 	bio_endio(bio, err);
 	mempool_free(mp_bh, conf->pool);
@@ -85,7 +85,7 @@ static void multipath_end_request(struct bio *bio, int error)
 {
 	int uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags);
 	struct multipath_bh * mp_bh = (struct multipath_bh *)(bio->bi_private);
-	multipath_conf_t *conf = mddev_to_conf(mp_bh->mddev);
+	multipath_conf_t *conf = mp_bh->mddev->private;
 	mdk_rdev_t *rdev = conf->multipaths[mp_bh->path].rdev;
 
 	if (uptodate)
@@ -107,7 +107,7 @@ static void multipath_end_request(struct bio *bio, int error)
 
 static void unplug_slaves(mddev_t *mddev)
 {
-	multipath_conf_t *conf = mddev_to_conf(mddev);
+	multipath_conf_t *conf = mddev->private;
 	int i;
 
 	rcu_read_lock();
@@ -138,7 +138,7 @@ static void multipath_unplug(struct request_queue *q)
 static int multipath_make_request (struct request_queue *q, struct bio * bio)
 {
 	mddev_t *mddev = q->queuedata;
-	multipath_conf_t *conf = mddev_to_conf(mddev);
+	multipath_conf_t *conf = mddev->private;
 	struct multipath_bh * mp_bh;
 	struct multipath_info *multipath;
 	const int rw = bio_data_dir(bio);
@@ -180,7 +180,7 @@ static int multipath_make_request (struct request_queue *q, struct bio * bio)
 
 static void multipath_status (struct seq_file *seq, mddev_t *mddev)
 {
-	multipath_conf_t *conf = mddev_to_conf(mddev);
+	multipath_conf_t *conf = mddev->private;
 	int i;
 	
 	seq_printf (seq, " [%d/%d] [", conf->raid_disks,
@@ -195,7 +195,7 @@ static void multipath_status (struct seq_file *seq, mddev_t *mddev)
 static int multipath_congested(void *data, int bits)
 {
 	mddev_t *mddev = data;
-	multipath_conf_t *conf = mddev_to_conf(mddev);
+	multipath_conf_t *conf = mddev->private;
 	int i, ret = 0;
 
 	rcu_read_lock();
@@ -220,7 +220,7 @@ static int multipath_congested(void *data, int bits)
  */
 static void multipath_error (mddev_t *mddev, mdk_rdev_t *rdev)
 {
-	multipath_conf_t *conf = mddev_to_conf(mddev);
+	multipath_conf_t *conf = mddev->private;
 
 	if (conf->working_disks <= 1) {
 		/*
@@ -367,7 +367,7 @@ static void multipathd (mddev_t *mddev)
 	struct multipath_bh *mp_bh;
 	struct bio *bio;
 	unsigned long flags;
-	multipath_conf_t *conf = mddev_to_conf(mddev);
+	multipath_conf_t *conf = mddev->private;
 	struct list_head *head = &conf->retry_list;
 
 	md_check_recovery(mddev);
@@ -421,6 +421,9 @@ static int multipath_run (mddev_t *mddev)
 	struct multipath_info *disk;
 	mdk_rdev_t *rdev;
 
+	if (md_check_no_bitmap(mddev))
+		return -EINVAL;
+
 	if (mddev->level != LEVEL_MULTIPATH) {
 		printk("multipath: %s: raid level not set to multipath IO (%d)\n",
 		       mdname(mddev), mddev->level);
@@ -531,7 +534,7 @@ out:
 
 static int multipath_stop (mddev_t *mddev)
 {
-	multipath_conf_t *conf = mddev_to_conf(mddev);
+	multipath_conf_t *conf = mddev->private;
 
 	md_unregister_thread(mddev->thread);
 	mddev->thread = NULL;
diff --git a/drivers/md/multipath.h b/drivers/md/multipath.h
index 6fa70b400cd..d1c2a8d7839 100644
--- a/drivers/md/multipath.h
+++ b/drivers/md/multipath.h
@@ -19,12 +19,6 @@ struct multipath_private_data {
 typedef struct multipath_private_data multipath_conf_t;
 
 /*
- * this is the only point in the RAID code where we violate
- * C type safety. mddev->private is an 'opaque' pointer.
- */
-#define mddev_to_conf(mddev) ((multipath_conf_t *) mddev->private)
-
-/*
  * this is our 'private' 'collective' MULTIPATH buffer head.
  * it contains information about what kind of IO operations were started
  * for this MULTIPATH operation, and about their status:
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index 925507e7d67..ab4a489d869 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -26,8 +26,8 @@
 static void raid0_unplug(struct request_queue *q)
 {
 	mddev_t *mddev = q->queuedata;
-	raid0_conf_t *conf = mddev_to_conf(mddev);
-	mdk_rdev_t **devlist = conf->strip_zone[0].dev;
+	raid0_conf_t *conf = mddev->private;
+	mdk_rdev_t **devlist = conf->devlist;
 	int i;
 
 	for (i=0; i<mddev->raid_disks; i++) {
@@ -40,8 +40,8 @@ static void raid0_unplug(struct request_queue *q)
 static int raid0_congested(void *data, int bits)
 {
 	mddev_t *mddev = data;
-	raid0_conf_t *conf = mddev_to_conf(mddev);
-	mdk_rdev_t **devlist = conf->strip_zone[0].dev;
+	raid0_conf_t *conf = mddev->private;
+	mdk_rdev_t **devlist = conf->devlist;
 	int i, ret = 0;
 
 	for (i = 0; i < mddev->raid_disks && !ret ; i++) {
@@ -52,27 +52,60 @@ static int raid0_congested(void *data, int bits)
 	return ret;
 }
 
+/*
+ * inform the user of the raid configuration
+*/
+static void dump_zones(mddev_t *mddev)
+{
+	int j, k, h;
+	sector_t zone_size = 0;
+	sector_t zone_start = 0;
+	char b[BDEVNAME_SIZE];
+	raid0_conf_t *conf = mddev->private;
+	printk(KERN_INFO "******* %s configuration *********\n",
+		mdname(mddev));
+	h = 0;
+	for (j = 0; j < conf->nr_strip_zones; j++) {
+		printk(KERN_INFO "zone%d=[", j);
+		for (k = 0; k < conf->strip_zone[j].nb_dev; k++)
+			printk("%s/",
+			bdevname(conf->devlist[j*mddev->raid_disks
+						+ k]->bdev, b));
+		printk("]\n");
+
+		zone_size  = conf->strip_zone[j].zone_end - zone_start;
+		printk(KERN_INFO "        zone offset=%llukb "
+				"device offset=%llukb size=%llukb\n",
+			(unsigned long long)zone_start>>1,
+			(unsigned long long)conf->strip_zone[j].dev_start>>1,
+			(unsigned long long)zone_size>>1);
+		zone_start = conf->strip_zone[j].zone_end;
+	}
+	printk(KERN_INFO "**********************************\n\n");
+}
 
-static int create_strip_zones (mddev_t *mddev)
+static int create_strip_zones(mddev_t *mddev)
 {
-	int i, c, j;
-	sector_t current_start, curr_zone_start;
-	sector_t min_spacing;
-	raid0_conf_t *conf = mddev_to_conf(mddev);
-	mdk_rdev_t *smallest, *rdev1, *rdev2, *rdev;
+	int i, c, j, err;
+	sector_t curr_zone_end, sectors;
+	mdk_rdev_t *smallest, *rdev1, *rdev2, *rdev, **dev;
 	struct strip_zone *zone;
 	int cnt;
 	char b[BDEVNAME_SIZE];
- 
-	/*
-	 * The number of 'same size groups'
-	 */
-	conf->nr_strip_zones = 0;
- 
+	raid0_conf_t *conf = kzalloc(sizeof(*conf), GFP_KERNEL);
+
+	if (!conf)
+		return -ENOMEM;
 	list_for_each_entry(rdev1, &mddev->disks, same_set) {
 		printk(KERN_INFO "raid0: looking at %s\n",
 			bdevname(rdev1->bdev,b));
 		c = 0;
+
+		/* round size to chunk_size */
+		sectors = rdev1->sectors;
+		sector_div(sectors, mddev->chunk_sectors);
+		rdev1->sectors = sectors * mddev->chunk_sectors;
+
 		list_for_each_entry(rdev2, &mddev->disks, same_set) {
 			printk(KERN_INFO "raid0:   comparing %s(%llu)",
 			       bdevname(rdev1->bdev,b),
@@ -103,16 +136,16 @@ static int create_strip_zones (mddev_t *mddev)
 		}
 	}
 	printk(KERN_INFO "raid0: FINAL %d zones\n", conf->nr_strip_zones);
-
+	err = -ENOMEM;
 	conf->strip_zone = kzalloc(sizeof(struct strip_zone)*
 				conf->nr_strip_zones, GFP_KERNEL);
 	if (!conf->strip_zone)
-		return 1;
+		goto abort;
 	conf->devlist = kzalloc(sizeof(mdk_rdev_t*)*
 				conf->nr_strip_zones*mddev->raid_disks,
 				GFP_KERNEL);
 	if (!conf->devlist)
-		return 1;
+		goto abort;
 
 	/* The first zone must contain all devices, so here we check that
 	 * there is a proper alignment of slots to devices and find them all
@@ -120,7 +153,8 @@ static int create_strip_zones (mddev_t *mddev)
 	zone = &conf->strip_zone[0];
 	cnt = 0;
 	smallest = NULL;
-	zone->dev = conf->devlist;
+	dev = conf->devlist;
+	err = -EINVAL;
 	list_for_each_entry(rdev1, &mddev->disks, same_set) {
 		int j = rdev1->raid_disk;
 
@@ -129,12 +163,12 @@ static int create_strip_zones (mddev_t *mddev)
 				"aborting!\n", j);
 			goto abort;
 		}
-		if (zone->dev[j]) {
+		if (dev[j]) {
 			printk(KERN_ERR "raid0: multiple devices for %d - "
 				"aborting!\n", j);
 			goto abort;
 		}
-		zone->dev[j] = rdev1;
+		dev[j] = rdev1;
 
 		blk_queue_stack_limits(mddev->queue,
 				       rdev1->bdev->bd_disk->queue);
@@ -157,34 +191,32 @@ static int create_strip_zones (mddev_t *mddev)
 		goto abort;
 	}
 	zone->nb_dev = cnt;
-	zone->sectors = smallest->sectors * cnt;
-	zone->zone_start = 0;
+	zone->zone_end = smallest->sectors * cnt;
 
-	current_start = smallest->sectors;
-	curr_zone_start = zone->sectors;
+	curr_zone_end = zone->zone_end;
 
 	/* now do the other zones */
 	for (i = 1; i < conf->nr_strip_zones; i++)
 	{
 		zone = conf->strip_zone + i;
-		zone->dev = conf->strip_zone[i-1].dev + mddev->raid_disks;
+		dev = conf->devlist + i * mddev->raid_disks;
 
 		printk(KERN_INFO "raid0: zone %d\n", i);
-		zone->dev_start = current_start;
+		zone->dev_start = smallest->sectors;
 		smallest = NULL;
 		c = 0;
 
 		for (j=0; j<cnt; j++) {
 			char b[BDEVNAME_SIZE];
-			rdev = conf->strip_zone[0].dev[j];
+			rdev = conf->devlist[j];
 			printk(KERN_INFO "raid0: checking %s ...",
 				bdevname(rdev->bdev, b));
-			if (rdev->sectors <= current_start) {
+			if (rdev->sectors <= zone->dev_start) {
 				printk(KERN_INFO " nope.\n");
 				continue;
 			}
 			printk(KERN_INFO " contained as device %d\n", c);
-			zone->dev[c] = rdev;
+			dev[c] = rdev;
 			c++;
 			if (!smallest || rdev->sectors < smallest->sectors) {
 				smallest = rdev;
@@ -194,47 +226,39 @@ static int create_strip_zones (mddev_t *mddev)
 		}
 
 		zone->nb_dev = c;
-		zone->sectors = (smallest->sectors - current_start) * c;
+		sectors = (smallest->sectors - zone->dev_start) * c;
 		printk(KERN_INFO "raid0: zone->nb_dev: %d, sectors: %llu\n",
-			zone->nb_dev, (unsigned long long)zone->sectors);
+			zone->nb_dev, (unsigned long long)sectors);
 
-		zone->zone_start = curr_zone_start;
-		curr_zone_start += zone->sectors;
+		curr_zone_end += sectors;
+		zone->zone_end = curr_zone_end;
 
-		current_start = smallest->sectors;
 		printk(KERN_INFO "raid0: current zone start: %llu\n",
-			(unsigned long long)current_start);
-	}
-
-	/* Now find appropriate hash spacing.
-	 * We want a number which causes most hash entries to cover
-	 * at most two strips, but the hash table must be at most
-	 * 1 PAGE.  We choose the smallest strip, or contiguous collection
-	 * of strips, that has big enough size.  We never consider the last
-	 * strip though as it's size has no bearing on the efficacy of the hash
-	 * table.
-	 */
-	conf->spacing = curr_zone_start;
-	min_spacing = curr_zone_start;
-	sector_div(min_spacing, PAGE_SIZE/sizeof(struct strip_zone*));
-	for (i=0; i < conf->nr_strip_zones-1; i++) {
-		sector_t s = 0;
-		for (j = i; j < conf->nr_strip_zones - 1 &&
-				s < min_spacing; j++)
-			s += conf->strip_zone[j].sectors;
-		if (s >= min_spacing && s < conf->spacing)
-			conf->spacing = s;
+			(unsigned long long)smallest->sectors);
 	}
-
 	mddev->queue->unplug_fn = raid0_unplug;
-
 	mddev->queue->backing_dev_info.congested_fn = raid0_congested;
 	mddev->queue->backing_dev_info.congested_data = mddev;
 
+	/*
+	 * now since we have the hard sector sizes, we can make sure
+	 * chunk size is a multiple of that sector size
+	 */
+	if ((mddev->chunk_sectors << 9) % queue_logical_block_size(mddev->queue)) {
+		printk(KERN_ERR "%s chunk_size of %d not valid\n",
+		       mdname(mddev),
+		       mddev->chunk_sectors << 9);
+		goto abort;
+	}
 	printk(KERN_INFO "raid0: done.\n");
+	mddev->private = conf;
 	return 0;
- abort:
-	return 1;
+abort:
+	kfree(conf->strip_zone);
+	kfree(conf->devlist);
+	kfree(conf);
+	mddev->private = NULL;
+	return err;
 }
 
 /**
@@ -252,10 +276,15 @@ static int raid0_mergeable_bvec(struct request_queue *q,
 	mddev_t *mddev = q->queuedata;
 	sector_t sector = bvm->bi_sector + get_start_sect(bvm->bi_bdev);
 	int max;
-	unsigned int chunk_sectors = mddev->chunk_size >> 9;
+	unsigned int chunk_sectors = mddev->chunk_sectors;
 	unsigned int bio_sectors = bvm->bi_size >> 9;
 
-	max =  (chunk_sectors - ((sector & (chunk_sectors - 1)) + bio_sectors)) << 9;
+	if (is_power_of_2(chunk_sectors))
+		max =  (chunk_sectors - ((sector & (chunk_sectors-1))
+						+ bio_sectors)) << 9;
+	else
+		max =  (chunk_sectors - (sector_div(sector, chunk_sectors)
+						+ bio_sectors)) << 9;
 	if (max < 0) max = 0; /* bio_add cannot handle a negative return */
 	if (max <= biovec->bv_len && bio_sectors == 0)
 		return biovec->bv_len;
@@ -277,84 +306,28 @@ static sector_t raid0_size(mddev_t *mddev, sector_t sectors, int raid_disks)
 	return array_sectors;
 }
 
-static int raid0_run (mddev_t *mddev)
+static int raid0_run(mddev_t *mddev)
 {
-	unsigned  cur=0, i=0, nb_zone;
-	s64 sectors;
-	raid0_conf_t *conf;
+	int ret;
 
-	if (mddev->chunk_size == 0) {
-		printk(KERN_ERR "md/raid0: non-zero chunk size required.\n");
+	if (mddev->chunk_sectors == 0) {
+		printk(KERN_ERR "md/raid0: chunk size must be set.\n");
 		return -EINVAL;
 	}
-	printk(KERN_INFO "%s: setting max_sectors to %d, segment boundary to %d\n",
-	       mdname(mddev),
-	       mddev->chunk_size >> 9,
-	       (mddev->chunk_size>>1)-1);
-	blk_queue_max_sectors(mddev->queue, mddev->chunk_size >> 9);
-	blk_queue_segment_boundary(mddev->queue, (mddev->chunk_size>>1) - 1);
+	if (md_check_no_bitmap(mddev))
+		return -EINVAL;
+	blk_queue_max_sectors(mddev->queue, mddev->chunk_sectors);
 	mddev->queue->queue_lock = &mddev->queue->__queue_lock;
 
-	conf = kmalloc(sizeof (raid0_conf_t), GFP_KERNEL);
-	if (!conf)
-		goto out;
-	mddev->private = (void *)conf;
- 
-	conf->strip_zone = NULL;
-	conf->devlist = NULL;
-	if (create_strip_zones (mddev)) 
-		goto out_free_conf;
+	ret = create_strip_zones(mddev);
+	if (ret < 0)
+		return ret;
 
 	/* calculate array device size */
 	md_set_array_sectors(mddev, raid0_size(mddev, 0, 0));
 
 	printk(KERN_INFO "raid0 : md_size is %llu sectors.\n",
 		(unsigned long long)mddev->array_sectors);
-	printk(KERN_INFO "raid0 : conf->spacing is %llu sectors.\n",
-		(unsigned long long)conf->spacing);
-	{
-		sector_t s = raid0_size(mddev, 0, 0);
-		sector_t space = conf->spacing;
-		int round;
-		conf->sector_shift = 0;
-		if (sizeof(sector_t) > sizeof(u32)) {
-			/*shift down space and s so that sector_div will work */
-			while (space > (sector_t) (~(u32)0)) {
-				s >>= 1;
-				space >>= 1;
-				s += 1; /* force round-up */
-				conf->sector_shift++;
-			}
-		}
-		round = sector_div(s, (u32)space) ? 1 : 0;
-		nb_zone = s + round;
-	}
-	printk(KERN_INFO "raid0 : nb_zone is %d.\n", nb_zone);
-
-	printk(KERN_INFO "raid0 : Allocating %zu bytes for hash.\n",
-				nb_zone*sizeof(struct strip_zone*));
-	conf->hash_table = kmalloc (sizeof (struct strip_zone *)*nb_zone, GFP_KERNEL);
-	if (!conf->hash_table)
-		goto out_free_conf;
-	sectors = conf->strip_zone[cur].sectors;
-
-	conf->hash_table[0] = conf->strip_zone + cur;
-	for (i=1; i< nb_zone; i++) {
-		while (sectors <= conf->spacing) {
-			cur++;
-			sectors += conf->strip_zone[cur].sectors;
-		}
-		sectors -= conf->spacing;
-		conf->hash_table[i] = conf->strip_zone + cur;
-	}
-	if (conf->sector_shift) {
-		conf->spacing >>= conf->sector_shift;
-		/* round spacing up so when we divide by it, we
-		 * err on the side of too-low, which is safest
-		 */
-		conf->spacing++;
-	}
-
 	/* calculate the max read-ahead size.
 	 * For read-ahead of large files to be effective, we need to
 	 * readahead at least twice a whole stripe. i.e. number of devices
@@ -365,48 +338,107 @@ static int raid0_run (mddev_t *mddev)
 	 * chunksize should be used in that case.
 	 */
 	{
-		int stripe = mddev->raid_disks * mddev->chunk_size / PAGE_SIZE;
+		int stripe = mddev->raid_disks *
+			(mddev->chunk_sectors << 9) / PAGE_SIZE;
 		if (mddev->queue->backing_dev_info.ra_pages < 2* stripe)
 			mddev->queue->backing_dev_info.ra_pages = 2* stripe;
 	}
 
-
 	blk_queue_merge_bvec(mddev->queue, raid0_mergeable_bvec);
+	dump_zones(mddev);
 	return 0;
+}
 
-out_free_conf:
+static int raid0_stop(mddev_t *mddev)
+{
+	raid0_conf_t *conf = mddev->private;
+
+	blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/
 	kfree(conf->strip_zone);
 	kfree(conf->devlist);
 	kfree(conf);
 	mddev->private = NULL;
-out:
-	return -ENOMEM;
+	return 0;
 }
 
-static int raid0_stop (mddev_t *mddev)
+/* Find the zone which holds a particular offset
+ * Update *sectorp to be an offset in that zone
+ */
+static struct strip_zone *find_zone(struct raid0_private_data *conf,
+				    sector_t *sectorp)
 {
-	raid0_conf_t *conf = mddev_to_conf(mddev);
+	int i;
+	struct strip_zone *z = conf->strip_zone;
+	sector_t sector = *sectorp;
+
+	for (i = 0; i < conf->nr_strip_zones; i++)
+		if (sector < z[i].zone_end) {
+			if (i)
+				*sectorp = sector - z[i-1].zone_end;
+			return z + i;
+		}
+	BUG();
+}
 
-	blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/
-	kfree(conf->hash_table);
-	conf->hash_table = NULL;
-	kfree(conf->strip_zone);
-	conf->strip_zone = NULL;
-	kfree(conf);
-	mddev->private = NULL;
+/*
+ * remaps the bio to the target device. we separate two flows.
+ * power 2 flow and a general flow for the sake of perfromance
+*/
+static mdk_rdev_t *map_sector(mddev_t *mddev, struct strip_zone *zone,
+				sector_t sector, sector_t *sector_offset)
+{
+	unsigned int sect_in_chunk;
+	sector_t chunk;
+	raid0_conf_t *conf = mddev->private;
+	unsigned int chunk_sects = mddev->chunk_sectors;
+
+	if (is_power_of_2(chunk_sects)) {
+		int chunksect_bits = ffz(~chunk_sects);
+		/* find the sector offset inside the chunk */
+		sect_in_chunk  = sector & (chunk_sects - 1);
+		sector >>= chunksect_bits;
+		/* chunk in zone */
+		chunk = *sector_offset;
+		/* quotient is the chunk in real device*/
+		sector_div(chunk, zone->nb_dev << chunksect_bits);
+	} else{
+		sect_in_chunk = sector_div(sector, chunk_sects);
+		chunk = *sector_offset;
+		sector_div(chunk, chunk_sects * zone->nb_dev);
+	}
+	/*
+	*  position the bio over the real device
+	*  real sector = chunk in device + starting of zone
+	*	+ the position in the chunk
+	*/
+	*sector_offset = (chunk * chunk_sects) + sect_in_chunk;
+	return conf->devlist[(zone - conf->strip_zone)*mddev->raid_disks
+			     + sector_div(sector, zone->nb_dev)];
+}
 
-	return 0;
+/*
+ * Is io distribute over 1 or more chunks ?
+*/
+static inline int is_io_in_chunk_boundary(mddev_t *mddev,
+			unsigned int chunk_sects, struct bio *bio)
+{
+	if (likely(is_power_of_2(chunk_sects))) {
+		return chunk_sects >= ((bio->bi_sector & (chunk_sects-1))
+					+ (bio->bi_size >> 9));
+	} else{
+		sector_t sector = bio->bi_sector;
+		return chunk_sects >= (sector_div(sector, chunk_sects)
+						+ (bio->bi_size >> 9));
+	}
 }
 
-static int raid0_make_request (struct request_queue *q, struct bio *bio)
+static int raid0_make_request(struct request_queue *q, struct bio *bio)
 {
 	mddev_t *mddev = q->queuedata;
-	unsigned int sect_in_chunk, chunksect_bits, chunk_sects;
-	raid0_conf_t *conf = mddev_to_conf(mddev);
+	unsigned int chunk_sects;
+	sector_t sector_offset;
 	struct strip_zone *zone;
 	mdk_rdev_t *tmp_dev;
-	sector_t chunk;
-	sector_t sector, rsect;
 	const int rw = bio_data_dir(bio);
 	int cpu;
 
@@ -421,11 +453,9 @@ static int raid0_make_request (struct request_queue *q, struct bio *bio)
 		      bio_sectors(bio));
 	part_stat_unlock();
 
-	chunk_sects = mddev->chunk_size >> 9;
-	chunksect_bits = ffz(~chunk_sects);
-	sector = bio->bi_sector;
-
-	if (unlikely(chunk_sects < (bio->bi_sector & (chunk_sects - 1)) + (bio->bi_size >> 9))) {
+	chunk_sects = mddev->chunk_sectors;
+	if (unlikely(!is_io_in_chunk_boundary(mddev, chunk_sects, bio))) {
+		sector_t sector = bio->bi_sector;
 		struct bio_pair *bp;
 		/* Sanity check -- queue functions should prevent this happening */
 		if (bio->bi_vcnt != 1 ||
@@ -434,7 +464,12 @@ static int raid0_make_request (struct request_queue *q, struct bio *bio)
 		/* This is a one page bio that upper layers
 		 * refuse to split for us, so we need to split it.
 		 */
-		bp = bio_split(bio, chunk_sects - (bio->bi_sector & (chunk_sects - 1)));
+		if (likely(is_power_of_2(chunk_sects)))
+			bp = bio_split(bio, chunk_sects - (sector &
+							   (chunk_sects-1)));
+		else
+			bp = bio_split(bio, chunk_sects -
+				       sector_div(sector, chunk_sects));
 		if (raid0_make_request(q, &bp->bio1))
 			generic_make_request(&bp->bio1);
 		if (raid0_make_request(q, &bp->bio2))
@@ -443,34 +478,14 @@ static int raid0_make_request (struct request_queue *q, struct bio *bio)
 		bio_pair_release(bp);
 		return 0;
 	}
- 
-
-	{
-		sector_t x = sector >> conf->sector_shift;
-		sector_div(x, (u32)conf->spacing);
-		zone = conf->hash_table[x];
-	}
 
-	while (sector >= zone->zone_start + zone->sectors)
-		zone++;
-
-	sect_in_chunk = bio->bi_sector & (chunk_sects - 1);
-
-
-	{
-		sector_t x = (sector - zone->zone_start) >> chunksect_bits;
-
-		sector_div(x, zone->nb_dev);
-		chunk = x;
-
-		x = sector >> chunksect_bits;
-		tmp_dev = zone->dev[sector_div(x, zone->nb_dev)];
-	}
-	rsect = (chunk << chunksect_bits) + zone->dev_start + sect_in_chunk;
- 
+	sector_offset = bio->bi_sector;
+	zone =  find_zone(mddev->private, &sector_offset);
+	tmp_dev = map_sector(mddev, zone, bio->bi_sector,
+			     &sector_offset);
 	bio->bi_bdev = tmp_dev->bdev;
-	bio->bi_sector = rsect + tmp_dev->data_offset;
-
+	bio->bi_sector = sector_offset + zone->dev_start +
+		tmp_dev->data_offset;
 	/*
 	 * Let the main block layer submit the IO and resolve recursion:
 	 */
@@ -485,31 +500,35 @@ bad_map:
 	return 0;
 }
 
-static void raid0_status (struct seq_file *seq, mddev_t *mddev)
+static void raid0_status(struct seq_file *seq, mddev_t *mddev)
 {
 #undef MD_DEBUG
 #ifdef MD_DEBUG
 	int j, k, h;
 	char b[BDEVNAME_SIZE];
-	raid0_conf_t *conf = mddev_to_conf(mddev);
+	raid0_conf_t *conf = mddev->private;
 
+	sector_t zone_size;
+	sector_t zone_start = 0;
 	h = 0;
+
 	for (j = 0; j < conf->nr_strip_zones; j++) {
 		seq_printf(seq, "      z%d", j);
-		if (conf->hash_table[h] == conf->strip_zone+j)
-			seq_printf(seq, "(h%d)", h++);
 		seq_printf(seq, "=[");
 		for (k = 0; k < conf->strip_zone[j].nb_dev; k++)
 			seq_printf(seq, "%s/", bdevname(
-				conf->strip_zone[j].dev[k]->bdev,b));
-
-		seq_printf(seq, "] zs=%d ds=%d s=%d\n",
-				conf->strip_zone[j].zone_start,
-				conf->strip_zone[j].dev_start,
-				conf->strip_zone[j].sectors);
+				conf->devlist[j*mddev->raid_disks + k]
+						->bdev, b));
+
+		zone_size  = conf->strip_zone[j].zone_end - zone_start;
+		seq_printf(seq, "] ze=%lld ds=%lld s=%lld\n",
+			(unsigned long long)zone_start>>1,
+			(unsigned long long)conf->strip_zone[j].dev_start>>1,
+			(unsigned long long)zone_size>>1);
+		zone_start = conf->strip_zone[j].zone_end;
 	}
 #endif
-	seq_printf(seq, " %dk chunks", mddev->chunk_size/1024);
+	seq_printf(seq, " %dk chunks", mddev->chunk_sectors / 2);
 	return;
 }
 
diff --git a/drivers/md/raid0.h b/drivers/md/raid0.h
index 824b12eb1d4..91f8e876ee6 100644
--- a/drivers/md/raid0.h
+++ b/drivers/md/raid0.h
@@ -3,26 +3,18 @@
 
 struct strip_zone
 {
-	sector_t zone_start;	/* Zone offset in md_dev (in sectors) */
+	sector_t zone_end;	/* Start of the next zone (in sectors) */
 	sector_t dev_start;	/* Zone offset in real dev (in sectors) */
-	sector_t sectors;	/* Zone size in sectors */
 	int nb_dev;		/* # of devices attached to the zone */
-	mdk_rdev_t **dev;	/* Devices attached to the zone */
 };
 
 struct raid0_private_data
 {
-	struct strip_zone **hash_table; /* Table of indexes into strip_zone */
 	struct strip_zone *strip_zone;
 	mdk_rdev_t **devlist; /* lists of rdevs, pointed to by strip_zone->dev */
 	int nr_strip_zones;
-
-	sector_t spacing;
-	int sector_shift; /* shift this before divide by spacing */
 };
 
 typedef struct raid0_private_data raid0_conf_t;
 
-#define mddev_to_conf(mddev) ((raid0_conf_t *) mddev->private)
-
 #endif
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index e23758b4a34..89939a7aef5 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -182,7 +182,7 @@ static void put_all_bios(conf_t *conf, r1bio_t *r1_bio)
 
 static void free_r1bio(r1bio_t *r1_bio)
 {
-	conf_t *conf = mddev_to_conf(r1_bio->mddev);
+	conf_t *conf = r1_bio->mddev->private;
 
 	/*
 	 * Wake up any possible resync thread that waits for the device
@@ -196,7 +196,7 @@ static void free_r1bio(r1bio_t *r1_bio)
 
 static void put_buf(r1bio_t *r1_bio)
 {
-	conf_t *conf = mddev_to_conf(r1_bio->mddev);
+	conf_t *conf = r1_bio->mddev->private;
 	int i;
 
 	for (i=0; i<conf->raid_disks; i++) {
@@ -214,7 +214,7 @@ static void reschedule_retry(r1bio_t *r1_bio)
 {
 	unsigned long flags;
 	mddev_t *mddev = r1_bio->mddev;
-	conf_t *conf = mddev_to_conf(mddev);
+	conf_t *conf = mddev->private;
 
 	spin_lock_irqsave(&conf->device_lock, flags);
 	list_add(&r1_bio->retry_list, &conf->retry_list);
@@ -253,7 +253,7 @@ static void raid_end_bio_io(r1bio_t *r1_bio)
  */
 static inline void update_head_pos(int disk, r1bio_t *r1_bio)
 {
-	conf_t *conf = mddev_to_conf(r1_bio->mddev);
+	conf_t *conf = r1_bio->mddev->private;
 
 	conf->mirrors[disk].head_position =
 		r1_bio->sector + (r1_bio->sectors);
@@ -264,7 +264,7 @@ static void raid1_end_read_request(struct bio *bio, int error)
 	int uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags);
 	r1bio_t * r1_bio = (r1bio_t *)(bio->bi_private);
 	int mirror;
-	conf_t *conf = mddev_to_conf(r1_bio->mddev);
+	conf_t *conf = r1_bio->mddev->private;
 
 	mirror = r1_bio->read_disk;
 	/*
@@ -309,7 +309,7 @@ static void raid1_end_write_request(struct bio *bio, int error)
 	int uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags);
 	r1bio_t * r1_bio = (r1bio_t *)(bio->bi_private);
 	int mirror, behind = test_bit(R1BIO_BehindIO, &r1_bio->state);
-	conf_t *conf = mddev_to_conf(r1_bio->mddev);
+	conf_t *conf = r1_bio->mddev->private;
 	struct bio *to_put = NULL;
 
 
@@ -541,7 +541,7 @@ static int read_balance(conf_t *conf, r1bio_t *r1_bio)
 
 static void unplug_slaves(mddev_t *mddev)
 {
-	conf_t *conf = mddev_to_conf(mddev);
+	conf_t *conf = mddev->private;
 	int i;
 
 	rcu_read_lock();
@@ -573,7 +573,7 @@ static void raid1_unplug(struct request_queue *q)
 static int raid1_congested(void *data, int bits)
 {
 	mddev_t *mddev = data;
-	conf_t *conf = mddev_to_conf(mddev);
+	conf_t *conf = mddev->private;
 	int i, ret = 0;
 
 	rcu_read_lock();
@@ -772,7 +772,7 @@ do_sync_io:
 static int make_request(struct request_queue *q, struct bio * bio)
 {
 	mddev_t *mddev = q->queuedata;
-	conf_t *conf = mddev_to_conf(mddev);
+	conf_t *conf = mddev->private;
 	mirror_info_t *mirror;
 	r1bio_t *r1_bio;
 	struct bio *read_bio;
@@ -991,7 +991,7 @@ static int make_request(struct request_queue *q, struct bio * bio)
 
 static void status(struct seq_file *seq, mddev_t *mddev)
 {
-	conf_t *conf = mddev_to_conf(mddev);
+	conf_t *conf = mddev->private;
 	int i;
 
 	seq_printf(seq, " [%d/%d] [", conf->raid_disks,
@@ -1010,7 +1010,7 @@ static void status(struct seq_file *seq, mddev_t *mddev)
 static void error(mddev_t *mddev, mdk_rdev_t *rdev)
 {
 	char b[BDEVNAME_SIZE];
-	conf_t *conf = mddev_to_conf(mddev);
+	conf_t *conf = mddev->private;
 
 	/*
 	 * If it is not operational, then we have already marked it as dead
@@ -1214,7 +1214,7 @@ static void end_sync_write(struct bio *bio, int error)
 	int uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags);
 	r1bio_t * r1_bio = (r1bio_t *)(bio->bi_private);
 	mddev_t *mddev = r1_bio->mddev;
-	conf_t *conf = mddev_to_conf(mddev);
+	conf_t *conf = mddev->private;
 	int i;
 	int mirror=0;
 
@@ -1248,7 +1248,7 @@ static void end_sync_write(struct bio *bio, int error)
 
 static void sync_request_write(mddev_t *mddev, r1bio_t *r1_bio)
 {
-	conf_t *conf = mddev_to_conf(mddev);
+	conf_t *conf = mddev->private;
 	int i;
 	int disks = conf->raid_disks;
 	struct bio *bio, *wbio;
@@ -1562,7 +1562,7 @@ static void raid1d(mddev_t *mddev)
 	r1bio_t *r1_bio;
 	struct bio *bio;
 	unsigned long flags;
-	conf_t *conf = mddev_to_conf(mddev);
+	conf_t *conf = mddev->private;
 	struct list_head *head = &conf->retry_list;
 	int unplug=0;
 	mdk_rdev_t *rdev;
@@ -1585,7 +1585,7 @@ static void raid1d(mddev_t *mddev)
 		spin_unlock_irqrestore(&conf->device_lock, flags);
 
 		mddev = r1_bio->mddev;
-		conf = mddev_to_conf(mddev);
+		conf = mddev->private;
 		if (test_bit(R1BIO_IsSync, &r1_bio->state)) {
 			sync_request_write(mddev, r1_bio);
 			unplug = 1;
@@ -1706,7 +1706,7 @@ static int init_resync(conf_t *conf)
 
 static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, int go_faster)
 {
-	conf_t *conf = mddev_to_conf(mddev);
+	conf_t *conf = mddev->private;
 	r1bio_t *r1_bio;
 	struct bio *bio;
 	sector_t max_sector, nr_sectors;
@@ -2052,6 +2052,10 @@ static int run(mddev_t *mddev)
 		goto out_free_conf;
 	}
 
+	if (mddev->recovery_cp != MaxSector)
+		printk(KERN_NOTICE "raid1: %s is not clean"
+		       " -- starting background reconstruction\n",
+		       mdname(mddev));
 	printk(KERN_INFO 
 		"raid1: raid set %s active with %d out of %d mirrors\n",
 		mdname(mddev), mddev->raid_disks - mddev->degraded, 
@@ -2087,7 +2091,7 @@ out:
 
 static int stop(mddev_t *mddev)
 {
-	conf_t *conf = mddev_to_conf(mddev);
+	conf_t *conf = mddev->private;
 	struct bitmap *bitmap = mddev->bitmap;
 	int behind_wait = 0;
 
@@ -2155,16 +2159,16 @@ static int raid1_reshape(mddev_t *mddev)
 	mempool_t *newpool, *oldpool;
 	struct pool_info *newpoolinfo;
 	mirror_info_t *newmirrors;
-	conf_t *conf = mddev_to_conf(mddev);
+	conf_t *conf = mddev->private;
 	int cnt, raid_disks;
 	unsigned long flags;
 	int d, d2, err;
 
 	/* Cannot change chunk_size, layout, or level */
-	if (mddev->chunk_size != mddev->new_chunk ||
+	if (mddev->chunk_sectors != mddev->new_chunk_sectors ||
 	    mddev->layout != mddev->new_layout ||
 	    mddev->level != mddev->new_level) {
-		mddev->new_chunk = mddev->chunk_size;
+		mddev->new_chunk_sectors = mddev->chunk_sectors;
 		mddev->new_layout = mddev->layout;
 		mddev->new_level = mddev->level;
 		return -EINVAL;
@@ -2252,7 +2256,7 @@ static int raid1_reshape(mddev_t *mddev)
 
 static void raid1_quiesce(mddev_t *mddev, int state)
 {
-	conf_t *conf = mddev_to_conf(mddev);
+	conf_t *conf = mddev->private;
 
 	switch(state) {
 	case 1:
diff --git a/drivers/md/raid1.h b/drivers/md/raid1.h
index 1620eea3d57..e87b84deff6 100644
--- a/drivers/md/raid1.h
+++ b/drivers/md/raid1.h
@@ -64,12 +64,6 @@ struct r1_private_data_s {
 typedef struct r1_private_data_s conf_t;
 
 /*
- * this is the only point in the RAID code where we violate
- * C type safety. mddev->private is an 'opaque' pointer.
- */
-#define mddev_to_conf(mddev) ((conf_t *) mddev->private)
-
-/*
  * this is our 'private' RAID1 bio.
  *
  * it contains information about what kind of IO operations were started
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 750550c1166..ae12ceafe10 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -188,7 +188,7 @@ static void put_all_bios(conf_t *conf, r10bio_t *r10_bio)
 
 static void free_r10bio(r10bio_t *r10_bio)
 {
-	conf_t *conf = mddev_to_conf(r10_bio->mddev);
+	conf_t *conf = r10_bio->mddev->private;
 
 	/*
 	 * Wake up any possible resync thread that waits for the device
@@ -202,7 +202,7 @@ static void free_r10bio(r10bio_t *r10_bio)
 
 static void put_buf(r10bio_t *r10_bio)
 {
-	conf_t *conf = mddev_to_conf(r10_bio->mddev);
+	conf_t *conf = r10_bio->mddev->private;
 
 	mempool_free(r10_bio, conf->r10buf_pool);
 
@@ -213,7 +213,7 @@ static void reschedule_retry(r10bio_t *r10_bio)
 {
 	unsigned long flags;
 	mddev_t *mddev = r10_bio->mddev;
-	conf_t *conf = mddev_to_conf(mddev);
+	conf_t *conf = mddev->private;
 
 	spin_lock_irqsave(&conf->device_lock, flags);
 	list_add(&r10_bio->retry_list, &conf->retry_list);
@@ -245,7 +245,7 @@ static void raid_end_bio_io(r10bio_t *r10_bio)
  */
 static inline void update_head_pos(int slot, r10bio_t *r10_bio)
 {
-	conf_t *conf = mddev_to_conf(r10_bio->mddev);
+	conf_t *conf = r10_bio->mddev->private;
 
 	conf->mirrors[r10_bio->devs[slot].devnum].head_position =
 		r10_bio->devs[slot].addr + (r10_bio->sectors);
@@ -256,7 +256,7 @@ static void raid10_end_read_request(struct bio *bio, int error)
 	int uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags);
 	r10bio_t * r10_bio = (r10bio_t *)(bio->bi_private);
 	int slot, dev;
-	conf_t *conf = mddev_to_conf(r10_bio->mddev);
+	conf_t *conf = r10_bio->mddev->private;
 
 
 	slot = r10_bio->read_slot;
@@ -297,7 +297,7 @@ static void raid10_end_write_request(struct bio *bio, int error)
 	int uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags);
 	r10bio_t * r10_bio = (r10bio_t *)(bio->bi_private);
 	int slot, dev;
-	conf_t *conf = mddev_to_conf(r10_bio->mddev);
+	conf_t *conf = r10_bio->mddev->private;
 
 	for (slot = 0; slot < conf->copies; slot++)
 		if (r10_bio->devs[slot].bio == bio)
@@ -461,7 +461,7 @@ static int raid10_mergeable_bvec(struct request_queue *q,
 	mddev_t *mddev = q->queuedata;
 	sector_t sector = bvm->bi_sector + get_start_sect(bvm->bi_bdev);
 	int max;
-	unsigned int chunk_sectors = mddev->chunk_size >> 9;
+	unsigned int chunk_sectors = mddev->chunk_sectors;
 	unsigned int bio_sectors = bvm->bi_size >> 9;
 
 	max =  (chunk_sectors - ((sector & (chunk_sectors - 1)) + bio_sectors)) << 9;
@@ -596,7 +596,7 @@ rb_out:
 
 static void unplug_slaves(mddev_t *mddev)
 {
-	conf_t *conf = mddev_to_conf(mddev);
+	conf_t *conf = mddev->private;
 	int i;
 
 	rcu_read_lock();
@@ -628,7 +628,7 @@ static void raid10_unplug(struct request_queue *q)
 static int raid10_congested(void *data, int bits)
 {
 	mddev_t *mddev = data;
-	conf_t *conf = mddev_to_conf(mddev);
+	conf_t *conf = mddev->private;
 	int i, ret = 0;
 
 	rcu_read_lock();
@@ -788,7 +788,7 @@ static void unfreeze_array(conf_t *conf)
 static int make_request(struct request_queue *q, struct bio * bio)
 {
 	mddev_t *mddev = q->queuedata;
-	conf_t *conf = mddev_to_conf(mddev);
+	conf_t *conf = mddev->private;
 	mirror_info_t *mirror;
 	r10bio_t *r10_bio;
 	struct bio *read_bio;
@@ -981,11 +981,11 @@ static int make_request(struct request_queue *q, struct bio * bio)
 
 static void status(struct seq_file *seq, mddev_t *mddev)
 {
-	conf_t *conf = mddev_to_conf(mddev);
+	conf_t *conf = mddev->private;
 	int i;
 
 	if (conf->near_copies < conf->raid_disks)
-		seq_printf(seq, " %dK chunks", mddev->chunk_size/1024);
+		seq_printf(seq, " %dK chunks", mddev->chunk_sectors / 2);
 	if (conf->near_copies > 1)
 		seq_printf(seq, " %d near-copies", conf->near_copies);
 	if (conf->far_copies > 1) {
@@ -1006,7 +1006,7 @@ static void status(struct seq_file *seq, mddev_t *mddev)
 static void error(mddev_t *mddev, mdk_rdev_t *rdev)
 {
 	char b[BDEVNAME_SIZE];
-	conf_t *conf = mddev_to_conf(mddev);
+	conf_t *conf = mddev->private;
 
 	/*
 	 * If it is not operational, then we have already marked it as dead
@@ -1215,7 +1215,7 @@ abort:
 static void end_sync_read(struct bio *bio, int error)
 {
 	r10bio_t * r10_bio = (r10bio_t *)(bio->bi_private);
-	conf_t *conf = mddev_to_conf(r10_bio->mddev);
+	conf_t *conf = r10_bio->mddev->private;
 	int i,d;
 
 	for (i=0; i<conf->copies; i++)
@@ -1253,7 +1253,7 @@ static void end_sync_write(struct bio *bio, int error)
 	int uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags);
 	r10bio_t * r10_bio = (r10bio_t *)(bio->bi_private);
 	mddev_t *mddev = r10_bio->mddev;
-	conf_t *conf = mddev_to_conf(mddev);
+	conf_t *conf = mddev->private;
 	int i,d;
 
 	for (i = 0; i < conf->copies; i++)
@@ -1300,7 +1300,7 @@ static void end_sync_write(struct bio *bio, int error)
  */
 static void sync_request_write(mddev_t *mddev, r10bio_t *r10_bio)
 {
-	conf_t *conf = mddev_to_conf(mddev);
+	conf_t *conf = mddev->private;
 	int i, first;
 	struct bio *tbio, *fbio;
 
@@ -1400,7 +1400,7 @@ done:
 
 static void recovery_request_write(mddev_t *mddev, r10bio_t *r10_bio)
 {
-	conf_t *conf = mddev_to_conf(mddev);
+	conf_t *conf = mddev->private;
 	int i, d;
 	struct bio *bio, *wbio;
 
@@ -1549,7 +1549,7 @@ static void raid10d(mddev_t *mddev)
 	r10bio_t *r10_bio;
 	struct bio *bio;
 	unsigned long flags;
-	conf_t *conf = mddev_to_conf(mddev);
+	conf_t *conf = mddev->private;
 	struct list_head *head = &conf->retry_list;
 	int unplug=0;
 	mdk_rdev_t *rdev;
@@ -1572,7 +1572,7 @@ static void raid10d(mddev_t *mddev)
 		spin_unlock_irqrestore(&conf->device_lock, flags);
 
 		mddev = r10_bio->mddev;
-		conf = mddev_to_conf(mddev);
+		conf = mddev->private;
 		if (test_bit(R10BIO_IsSync, &r10_bio->state)) {
 			sync_request_write(mddev, r10_bio);
 			unplug = 1;
@@ -1680,7 +1680,7 @@ static int init_resync(conf_t *conf)
 
 static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, int go_faster)
 {
-	conf_t *conf = mddev_to_conf(mddev);
+	conf_t *conf = mddev->private;
 	r10bio_t *r10_bio;
 	struct bio *biolist = NULL, *bio;
 	sector_t max_sector, nr_sectors;
@@ -2026,7 +2026,7 @@ static sector_t
 raid10_size(mddev_t *mddev, sector_t sectors, int raid_disks)
 {
 	sector_t size;
-	conf_t *conf = mddev_to_conf(mddev);
+	conf_t *conf = mddev->private;
 
 	if (!raid_disks)
 		raid_disks = mddev->raid_disks;
@@ -2050,9 +2050,10 @@ static int run(mddev_t *mddev)
 	int nc, fc, fo;
 	sector_t stride, size;
 
-	if (mddev->chunk_size < PAGE_SIZE) {
+	if (mddev->chunk_sectors < (PAGE_SIZE >> 9) ||
+	    !is_power_of_2(mddev->chunk_sectors)) {
 		printk(KERN_ERR "md/raid10: chunk size must be "
-		       "at least PAGE_SIZE(%ld).\n", PAGE_SIZE);
+		       "at least PAGE_SIZE(%ld) and be a power of 2.\n", PAGE_SIZE);
 		return -EINVAL;
 	}
 
@@ -2095,8 +2096,8 @@ static int run(mddev_t *mddev)
 	conf->far_copies = fc;
 	conf->copies = nc*fc;
 	conf->far_offset = fo;
-	conf->chunk_mask = (sector_t)(mddev->chunk_size>>9)-1;
-	conf->chunk_shift = ffz(~mddev->chunk_size) - 9;
+	conf->chunk_mask = mddev->chunk_sectors - 1;
+	conf->chunk_shift = ffz(~mddev->chunk_sectors);
 	size = mddev->dev_sectors >> conf->chunk_shift;
 	sector_div(size, fc);
 	size = size * conf->raid_disks;
@@ -2185,6 +2186,10 @@ static int run(mddev_t *mddev)
 		goto out_free_conf;
 	}
 
+	if (mddev->recovery_cp != MaxSector)
+		printk(KERN_NOTICE "raid10: %s is not clean"
+		       " -- starting background reconstruction\n",
+		       mdname(mddev));
 	printk(KERN_INFO
 		"raid10: raid set %s active with %d out of %d devices\n",
 		mdname(mddev), mddev->raid_disks - mddev->degraded,
@@ -2204,7 +2209,8 @@ static int run(mddev_t *mddev)
 	 * maybe...
 	 */
 	{
-		int stripe = conf->raid_disks * (mddev->chunk_size / PAGE_SIZE);
+		int stripe = conf->raid_disks *
+			((mddev->chunk_sectors << 9) / PAGE_SIZE);
 		stripe /= conf->near_copies;
 		if (mddev->queue->backing_dev_info.ra_pages < 2* stripe)
 			mddev->queue->backing_dev_info.ra_pages = 2* stripe;
@@ -2227,7 +2233,7 @@ out:
 
 static int stop(mddev_t *mddev)
 {
-	conf_t *conf = mddev_to_conf(mddev);
+	conf_t *conf = mddev->private;
 
 	raise_barrier(conf, 0);
 	lower_barrier(conf);
@@ -2245,7 +2251,7 @@ static int stop(mddev_t *mddev)
 
 static void raid10_quiesce(mddev_t *mddev, int state)
 {
-	conf_t *conf = mddev_to_conf(mddev);
+	conf_t *conf = mddev->private;
 
 	switch(state) {
 	case 1:
diff --git a/drivers/md/raid10.h b/drivers/md/raid10.h
index 244dbe507a5..59cd1efb8d3 100644
--- a/drivers/md/raid10.h
+++ b/drivers/md/raid10.h
@@ -62,12 +62,6 @@ struct r10_private_data_s {
 typedef struct r10_private_data_s conf_t;
 
 /*
- * this is the only point in the RAID code where we violate
- * C type safety. mddev->private is an 'opaque' pointer.
- */
-#define mddev_to_conf(mddev) ((conf_t *) mddev->private)
-
-/*
  * this is our 'private' RAID10 bio.
  *
  * it contains information about what kind of IO operations were started
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index bef87669823..f9f991e6e13 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -1274,8 +1274,8 @@ static sector_t raid5_compute_sector(raid5_conf_t *conf, sector_t r_sector,
 	sector_t new_sector;
 	int algorithm = previous ? conf->prev_algo
 				 : conf->algorithm;
-	int sectors_per_chunk = previous ? (conf->prev_chunk >> 9)
-					 : (conf->chunk_size >> 9);
+	int sectors_per_chunk = previous ? conf->prev_chunk_sectors
+					 : conf->chunk_sectors;
 	int raid_disks = previous ? conf->previous_raid_disks
 				  : conf->raid_disks;
 	int data_disks = raid_disks - conf->max_degraded;
@@ -1480,8 +1480,8 @@ static sector_t compute_blocknr(struct stripe_head *sh, int i, int previous)
 	int raid_disks = sh->disks;
 	int data_disks = raid_disks - conf->max_degraded;
 	sector_t new_sector = sh->sector, check;
-	int sectors_per_chunk = previous ? (conf->prev_chunk >> 9)
-					 : (conf->chunk_size >> 9);
+	int sectors_per_chunk = previous ? conf->prev_chunk_sectors
+					 : conf->chunk_sectors;
 	int algorithm = previous ? conf->prev_algo
 				 : conf->algorithm;
 	sector_t stripe;
@@ -1997,8 +1997,7 @@ static void stripe_set_idx(sector_t stripe, raid5_conf_t *conf, int previous,
 			    struct stripe_head *sh)
 {
 	int sectors_per_chunk =
-		previous ? (conf->prev_chunk >> 9)
-			 : (conf->chunk_size >> 9);
+		previous ? conf->prev_chunk_sectors : conf->chunk_sectors;
 	int dd_idx;
 	int chunk_offset = sector_div(stripe, sectors_per_chunk);
 	int disks = previous ? conf->previous_raid_disks : conf->raid_disks;
@@ -3284,7 +3283,7 @@ static void activate_bit_delay(raid5_conf_t *conf)
 
 static void unplug_slaves(mddev_t *mddev)
 {
-	raid5_conf_t *conf = mddev_to_conf(mddev);
+	raid5_conf_t *conf = mddev->private;
 	int i;
 
 	rcu_read_lock();
@@ -3308,7 +3307,7 @@ static void unplug_slaves(mddev_t *mddev)
 static void raid5_unplug_device(struct request_queue *q)
 {
 	mddev_t *mddev = q->queuedata;
-	raid5_conf_t *conf = mddev_to_conf(mddev);
+	raid5_conf_t *conf = mddev->private;
 	unsigned long flags;
 
 	spin_lock_irqsave(&conf->device_lock, flags);
@@ -3327,7 +3326,7 @@ static void raid5_unplug_device(struct request_queue *q)
 static int raid5_congested(void *data, int bits)
 {
 	mddev_t *mddev = data;
-	raid5_conf_t *conf = mddev_to_conf(mddev);
+	raid5_conf_t *conf = mddev->private;
 
 	/* No difference between reads and writes.  Just check
 	 * how busy the stripe_cache is
@@ -3352,14 +3351,14 @@ static int raid5_mergeable_bvec(struct request_queue *q,
 	mddev_t *mddev = q->queuedata;
 	sector_t sector = bvm->bi_sector + get_start_sect(bvm->bi_bdev);
 	int max;
-	unsigned int chunk_sectors = mddev->chunk_size >> 9;
+	unsigned int chunk_sectors = mddev->chunk_sectors;
 	unsigned int bio_sectors = bvm->bi_size >> 9;
 
 	if ((bvm->bi_rw & 1) == WRITE)
 		return biovec->bv_len; /* always allow writes to be mergeable */
 
-	if (mddev->new_chunk < mddev->chunk_size)
-		chunk_sectors = mddev->new_chunk >> 9;
+	if (mddev->new_chunk_sectors < mddev->chunk_sectors)
+		chunk_sectors = mddev->new_chunk_sectors;
 	max =  (chunk_sectors - ((sector & (chunk_sectors - 1)) + bio_sectors)) << 9;
 	if (max < 0) max = 0;
 	if (max <= biovec->bv_len && bio_sectors == 0)
@@ -3372,11 +3371,11 @@ static int raid5_mergeable_bvec(struct request_queue *q,
 static int in_chunk_boundary(mddev_t *mddev, struct bio *bio)
 {
 	sector_t sector = bio->bi_sector + get_start_sect(bio->bi_bdev);
-	unsigned int chunk_sectors = mddev->chunk_size >> 9;
+	unsigned int chunk_sectors = mddev->chunk_sectors;
 	unsigned int bio_sectors = bio->bi_size >> 9;
 
-	if (mddev->new_chunk < mddev->chunk_size)
-		chunk_sectors = mddev->new_chunk >> 9;
+	if (mddev->new_chunk_sectors < mddev->chunk_sectors)
+		chunk_sectors = mddev->new_chunk_sectors;
 	return  chunk_sectors >=
 		((sector & (chunk_sectors - 1)) + bio_sectors);
 }
@@ -3440,7 +3439,7 @@ static void raid5_align_endio(struct bio *bi, int error)
 	bio_put(bi);
 
 	mddev = raid_bi->bi_bdev->bd_disk->queue->queuedata;
-	conf = mddev_to_conf(mddev);
+	conf = mddev->private;
 	rdev = (void*)raid_bi->bi_next;
 	raid_bi->bi_next = NULL;
 
@@ -3482,7 +3481,7 @@ static int bio_fits_rdev(struct bio *bi)
 static int chunk_aligned_read(struct request_queue *q, struct bio * raid_bio)
 {
 	mddev_t *mddev = q->queuedata;
-	raid5_conf_t *conf = mddev_to_conf(mddev);
+	raid5_conf_t *conf = mddev->private;
 	unsigned int dd_idx;
 	struct bio* align_bi;
 	mdk_rdev_t *rdev;
@@ -3599,7 +3598,7 @@ static struct stripe_head *__get_priority_stripe(raid5_conf_t *conf)
 static int make_request(struct request_queue *q, struct bio * bi)
 {
 	mddev_t *mddev = q->queuedata;
-	raid5_conf_t *conf = mddev_to_conf(mddev);
+	raid5_conf_t *conf = mddev->private;
 	int dd_idx;
 	sector_t new_sector;
 	sector_t logical_sector, last_sector;
@@ -3696,6 +3695,7 @@ static int make_request(struct request_queue *q, struct bio * bi)
 				spin_unlock_irq(&conf->device_lock);
 				if (must_retry) {
 					release_stripe(sh);
+					schedule();
 					goto retry;
 				}
 			}
@@ -3791,10 +3791,10 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped
 	 * If old and new chunk sizes differ, we need to process the
 	 * largest of these
 	 */
-	if (mddev->new_chunk > mddev->chunk_size)
-		reshape_sectors = mddev->new_chunk / 512;
+	if (mddev->new_chunk_sectors > mddev->chunk_sectors)
+		reshape_sectors = mddev->new_chunk_sectors;
 	else
-		reshape_sectors = mddev->chunk_size / 512;
+		reshape_sectors = mddev->chunk_sectors;
 
 	/* we update the metadata when there is more than 3Meg
 	 * in the block range (that is rather arbitrary, should
@@ -3917,7 +3917,7 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped
 				     1, &dd_idx, NULL);
 	last_sector =
 		raid5_compute_sector(conf, ((stripe_addr+reshape_sectors)
-					    *(new_data_disks) - 1),
+					    * new_data_disks - 1),
 				     1, &dd_idx, NULL);
 	if (last_sector >= mddev->dev_sectors)
 		last_sector = mddev->dev_sectors - 1;
@@ -3946,7 +3946,7 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped
 		wait_event(conf->wait_for_overlap,
 			   atomic_read(&conf->reshape_stripes) == 0);
 		mddev->reshape_position = conf->reshape_progress;
-		mddev->curr_resync_completed = mddev->curr_resync;
+		mddev->curr_resync_completed = mddev->curr_resync + reshape_sectors;
 		conf->reshape_checkpoint = jiffies;
 		set_bit(MD_CHANGE_DEVS, &mddev->flags);
 		md_wakeup_thread(mddev->thread);
@@ -4129,7 +4129,7 @@ static int  retry_aligned_read(raid5_conf_t *conf, struct bio *raid_bio)
 static void raid5d(mddev_t *mddev)
 {
 	struct stripe_head *sh;
-	raid5_conf_t *conf = mddev_to_conf(mddev);
+	raid5_conf_t *conf = mddev->private;
 	int handled;
 
 	pr_debug("+++ raid5d active\n");
@@ -4185,7 +4185,7 @@ static void raid5d(mddev_t *mddev)
 static ssize_t
 raid5_show_stripe_cache_size(mddev_t *mddev, char *page)
 {
-	raid5_conf_t *conf = mddev_to_conf(mddev);
+	raid5_conf_t *conf = mddev->private;
 	if (conf)
 		return sprintf(page, "%d\n", conf->max_nr_stripes);
 	else
@@ -4195,7 +4195,7 @@ raid5_show_stripe_cache_size(mddev_t *mddev, char *page)
 static ssize_t
 raid5_store_stripe_cache_size(mddev_t *mddev, const char *page, size_t len)
 {
-	raid5_conf_t *conf = mddev_to_conf(mddev);
+	raid5_conf_t *conf = mddev->private;
 	unsigned long new;
 	int err;
 
@@ -4233,7 +4233,7 @@ raid5_stripecache_size = __ATTR(stripe_cache_size, S_IRUGO | S_IWUSR,
 static ssize_t
 raid5_show_preread_threshold(mddev_t *mddev, char *page)
 {
-	raid5_conf_t *conf = mddev_to_conf(mddev);
+	raid5_conf_t *conf = mddev->private;
 	if (conf)
 		return sprintf(page, "%d\n", conf->bypass_threshold);
 	else
@@ -4243,7 +4243,7 @@ raid5_show_preread_threshold(mddev_t *mddev, char *page)
 static ssize_t
 raid5_store_preread_threshold(mddev_t *mddev, const char *page, size_t len)
 {
-	raid5_conf_t *conf = mddev_to_conf(mddev);
+	raid5_conf_t *conf = mddev->private;
 	unsigned long new;
 	if (len >= PAGE_SIZE)
 		return -EINVAL;
@@ -4267,7 +4267,7 @@ raid5_preread_bypass_threshold = __ATTR(preread_bypass_threshold,
 static ssize_t
 stripe_cache_active_show(mddev_t *mddev, char *page)
 {
-	raid5_conf_t *conf = mddev_to_conf(mddev);
+	raid5_conf_t *conf = mddev->private;
 	if (conf)
 		return sprintf(page, "%d\n", atomic_read(&conf->active_stripes));
 	else
@@ -4291,7 +4291,7 @@ static struct attribute_group raid5_attrs_group = {
 static sector_t
 raid5_size(mddev_t *mddev, sector_t sectors, int raid_disks)
 {
-	raid5_conf_t *conf = mddev_to_conf(mddev);
+	raid5_conf_t *conf = mddev->private;
 
 	if (!sectors)
 		sectors = mddev->dev_sectors;
@@ -4303,8 +4303,8 @@ raid5_size(mddev_t *mddev, sector_t sectors, int raid_disks)
 			raid_disks = conf->previous_raid_disks;
 	}
 
-	sectors &= ~((sector_t)mddev->chunk_size/512 - 1);
-	sectors &= ~((sector_t)mddev->new_chunk/512 - 1);
+	sectors &= ~((sector_t)mddev->chunk_sectors - 1);
+	sectors &= ~((sector_t)mddev->new_chunk_sectors - 1);
 	return sectors * (raid_disks - conf->max_degraded);
 }
 
@@ -4336,9 +4336,11 @@ static raid5_conf_t *setup_conf(mddev_t *mddev)
 		return ERR_PTR(-EINVAL);
 	}
 
-	if (!mddev->new_chunk || mddev->new_chunk % PAGE_SIZE) {
+	if (!mddev->new_chunk_sectors ||
+	    (mddev->new_chunk_sectors << 9) % PAGE_SIZE ||
+	    !is_power_of_2(mddev->new_chunk_sectors)) {
 		printk(KERN_ERR "raid5: invalid chunk size %d for %s\n",
-			mddev->new_chunk, mdname(mddev));
+		       mddev->new_chunk_sectors << 9, mdname(mddev));
 		return ERR_PTR(-EINVAL);
 	}
 
@@ -4401,7 +4403,7 @@ static raid5_conf_t *setup_conf(mddev_t *mddev)
 			conf->fullsync = 1;
 	}
 
-	conf->chunk_size = mddev->new_chunk;
+	conf->chunk_sectors = mddev->new_chunk_sectors;
 	conf->level = mddev->new_level;
 	if (conf->level == 6)
 		conf->max_degraded = 2;
@@ -4411,7 +4413,7 @@ static raid5_conf_t *setup_conf(mddev_t *mddev)
 	conf->max_nr_stripes = NR_STRIPES;
 	conf->reshape_progress = mddev->reshape_position;
 	if (conf->reshape_progress != MaxSector) {
-		conf->prev_chunk = mddev->chunk_size;
+		conf->prev_chunk_sectors = mddev->chunk_sectors;
 		conf->prev_algo = mddev->layout;
 	}
 
@@ -4453,6 +4455,10 @@ static int run(mddev_t *mddev)
 	int working_disks = 0;
 	mdk_rdev_t *rdev;
 
+	if (mddev->recovery_cp != MaxSector)
+		printk(KERN_NOTICE "raid5: %s is not clean"
+		       " -- starting background reconstruction\n",
+		       mdname(mddev));
 	if (mddev->reshape_position != MaxSector) {
 		/* Check that we can continue the reshape.
 		 * Currently only disks can change, it must
@@ -4475,7 +4481,7 @@ static int run(mddev_t *mddev)
 		 * geometry.
 		 */
 		here_new = mddev->reshape_position;
-		if (sector_div(here_new, (mddev->new_chunk>>9)*
+		if (sector_div(here_new, mddev->new_chunk_sectors *
 			       (mddev->raid_disks - max_degraded))) {
 			printk(KERN_ERR "raid5: reshape_position not "
 			       "on a stripe boundary\n");
@@ -4483,7 +4489,7 @@ static int run(mddev_t *mddev)
 		}
 		/* here_new is the stripe we will write to */
 		here_old = mddev->reshape_position;
-		sector_div(here_old, (mddev->chunk_size>>9)*
+		sector_div(here_old, mddev->chunk_sectors *
 			   (old_disks-max_degraded));
 		/* here_old is the first stripe that we might need to read
 		 * from */
@@ -4498,7 +4504,7 @@ static int run(mddev_t *mddev)
 	} else {
 		BUG_ON(mddev->level != mddev->new_level);
 		BUG_ON(mddev->layout != mddev->new_layout);
-		BUG_ON(mddev->chunk_size != mddev->new_chunk);
+		BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
 		BUG_ON(mddev->delta_disks != 0);
 	}
 
@@ -4532,7 +4538,7 @@ static int run(mddev_t *mddev)
 	}
 
 	/* device size must be a multiple of chunk size */
-	mddev->dev_sectors &= ~(mddev->chunk_size / 512 - 1);
+	mddev->dev_sectors &= ~(mddev->chunk_sectors - 1);
 	mddev->resync_max_sectors = mddev->dev_sectors;
 
 	if (mddev->degraded > 0 &&
@@ -4581,7 +4587,7 @@ static int run(mddev_t *mddev)
 	{
 		int data_disks = conf->previous_raid_disks - conf->max_degraded;
 		int stripe = data_disks *
-			(mddev->chunk_size / PAGE_SIZE);
+			((mddev->chunk_sectors << 9) / PAGE_SIZE);
 		if (mddev->queue->backing_dev_info.ra_pages < 2 * stripe)
 			mddev->queue->backing_dev_info.ra_pages = 2 * stripe;
 	}
@@ -4678,7 +4684,8 @@ static void status(struct seq_file *seq, mddev_t *mddev)
 	raid5_conf_t *conf = (raid5_conf_t *) mddev->private;
 	int i;
 
-	seq_printf (seq, " level %d, %dk chunk, algorithm %d", mddev->level, mddev->chunk_size >> 10, mddev->layout);
+	seq_printf(seq, " level %d, %dk chunk, algorithm %d", mddev->level,
+		mddev->chunk_sectors / 2, mddev->layout);
 	seq_printf (seq, " [%d/%d] [", conf->raid_disks, conf->raid_disks - mddev->degraded);
 	for (i = 0; i < conf->raid_disks; i++)
 		seq_printf (seq, "%s",
@@ -4826,7 +4833,7 @@ static int raid5_resize(mddev_t *mddev, sector_t sectors)
 	 * any io in the removed space completes, but it hardly seems
 	 * worth it.
 	 */
-	sectors &= ~((sector_t)mddev->chunk_size/512 - 1);
+	sectors &= ~((sector_t)mddev->chunk_sectors - 1);
 	md_set_array_sectors(mddev, raid5_size(mddev, sectors,
 					       mddev->raid_disks));
 	if (mddev->array_sectors >
@@ -4843,14 +4850,37 @@ static int raid5_resize(mddev_t *mddev, sector_t sectors)
 	return 0;
 }
 
-static int raid5_check_reshape(mddev_t *mddev)
+static int check_stripe_cache(mddev_t *mddev)
 {
-	raid5_conf_t *conf = mddev_to_conf(mddev);
+	/* Can only proceed if there are plenty of stripe_heads.
+	 * We need a minimum of one full stripe,, and for sensible progress
+	 * it is best to have about 4 times that.
+	 * If we require 4 times, then the default 256 4K stripe_heads will
+	 * allow for chunk sizes up to 256K, which is probably OK.
+	 * If the chunk size is greater, user-space should request more
+	 * stripe_heads first.
+	 */
+	raid5_conf_t *conf = mddev->private;
+	if (((mddev->chunk_sectors << 9) / STRIPE_SIZE) * 4
+	    > conf->max_nr_stripes ||
+	    ((mddev->new_chunk_sectors << 9) / STRIPE_SIZE) * 4
+	    > conf->max_nr_stripes) {
+		printk(KERN_WARNING "raid5: reshape: not enough stripes.  Needed %lu\n",
+		       ((max(mddev->chunk_sectors, mddev->new_chunk_sectors) << 9)
+			/ STRIPE_SIZE)*4);
+		return 0;
+	}
+	return 1;
+}
+
+static int check_reshape(mddev_t *mddev)
+{
+	raid5_conf_t *conf = mddev->private;
 
 	if (mddev->delta_disks == 0 &&
 	    mddev->new_layout == mddev->layout &&
-	    mddev->new_chunk == mddev->chunk_size)
-		return -EINVAL; /* nothing to do */
+	    mddev->new_chunk_sectors == mddev->chunk_sectors)
+		return 0; /* nothing to do */
 	if (mddev->bitmap)
 		/* Cannot grow a bitmap yet */
 		return -EBUSY;
@@ -4869,28 +4899,15 @@ static int raid5_check_reshape(mddev_t *mddev)
 			return -EINVAL;
 	}
 
-	/* Can only proceed if there are plenty of stripe_heads.
-	 * We need a minimum of one full stripe,, and for sensible progress
-	 * it is best to have about 4 times that.
-	 * If we require 4 times, then the default 256 4K stripe_heads will
-	 * allow for chunk sizes up to 256K, which is probably OK.
-	 * If the chunk size is greater, user-space should request more
-	 * stripe_heads first.
-	 */
-	if ((mddev->chunk_size / STRIPE_SIZE) * 4 > conf->max_nr_stripes ||
-	    (mddev->new_chunk / STRIPE_SIZE) * 4 > conf->max_nr_stripes) {
-		printk(KERN_WARNING "raid5: reshape: not enough stripes.  Needed %lu\n",
-		       (max(mddev->chunk_size, mddev->new_chunk)
-			/ STRIPE_SIZE)*4);
+	if (!check_stripe_cache(mddev))
 		return -ENOSPC;
-	}
 
 	return resize_stripes(conf, conf->raid_disks + mddev->delta_disks);
 }
 
 static int raid5_start_reshape(mddev_t *mddev)
 {
-	raid5_conf_t *conf = mddev_to_conf(mddev);
+	raid5_conf_t *conf = mddev->private;
 	mdk_rdev_t *rdev;
 	int spares = 0;
 	int added_devices = 0;
@@ -4899,6 +4916,9 @@ static int raid5_start_reshape(mddev_t *mddev)
 	if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
 		return -EBUSY;
 
+	if (!check_stripe_cache(mddev))
+		return -ENOSPC;
+
 	list_for_each_entry(rdev, &mddev->disks, same_set)
 		if (rdev->raid_disk < 0 &&
 		    !test_bit(Faulty, &rdev->flags))
@@ -4925,8 +4945,8 @@ static int raid5_start_reshape(mddev_t *mddev)
 	spin_lock_irq(&conf->device_lock);
 	conf->previous_raid_disks = conf->raid_disks;
 	conf->raid_disks += mddev->delta_disks;
-	conf->prev_chunk = conf->chunk_size;
-	conf->chunk_size = mddev->new_chunk;
+	conf->prev_chunk_sectors = conf->chunk_sectors;
+	conf->chunk_sectors = mddev->new_chunk_sectors;
 	conf->prev_algo = conf->algorithm;
 	conf->algorithm = mddev->new_layout;
 	if (mddev->delta_disks < 0)
@@ -5008,7 +5028,7 @@ static void end_reshape(raid5_conf_t *conf)
 		 */
 		{
 			int data_disks = conf->raid_disks - conf->max_degraded;
-			int stripe = data_disks * (conf->chunk_size
+			int stripe = data_disks * ((conf->chunk_sectors << 9)
 						   / PAGE_SIZE);
 			if (conf->mddev->queue->backing_dev_info.ra_pages < 2 * stripe)
 				conf->mddev->queue->backing_dev_info.ra_pages = 2 * stripe;
@@ -5022,7 +5042,7 @@ static void end_reshape(raid5_conf_t *conf)
 static void raid5_finish_reshape(mddev_t *mddev)
 {
 	struct block_device *bdev;
-	raid5_conf_t *conf = mddev_to_conf(mddev);
+	raid5_conf_t *conf = mddev->private;
 
 	if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
 
@@ -5053,7 +5073,7 @@ static void raid5_finish_reshape(mddev_t *mddev)
 				raid5_remove_disk(mddev, d);
 		}
 		mddev->layout = conf->algorithm;
-		mddev->chunk_size = conf->chunk_size;
+		mddev->chunk_sectors = conf->chunk_sectors;
 		mddev->reshape_position = MaxSector;
 		mddev->delta_disks = 0;
 	}
@@ -5061,7 +5081,7 @@ static void raid5_finish_reshape(mddev_t *mddev)
 
 static void raid5_quiesce(mddev_t *mddev, int state)
 {
-	raid5_conf_t *conf = mddev_to_conf(mddev);
+	raid5_conf_t *conf = mddev->private;
 
 	switch(state) {
 	case 2: /* resume for a suspend */
@@ -5111,7 +5131,7 @@ static void *raid5_takeover_raid1(mddev_t *mddev)
 
 	mddev->new_level = 5;
 	mddev->new_layout = ALGORITHM_LEFT_SYMMETRIC;
-	mddev->new_chunk = chunksect << 9;
+	mddev->new_chunk_sectors = chunksect;
 
 	return setup_conf(mddev);
 }
@@ -5150,24 +5170,24 @@ static void *raid5_takeover_raid6(mddev_t *mddev)
 }
 
 
-static int raid5_reconfig(mddev_t *mddev, int new_layout, int new_chunk)
+static int raid5_check_reshape(mddev_t *mddev)
 {
 	/* For a 2-drive array, the layout and chunk size can be changed
 	 * immediately as not restriping is needed.
 	 * For larger arrays we record the new value - after validation
 	 * to be used by a reshape pass.
 	 */
-	raid5_conf_t *conf = mddev_to_conf(mddev);
+	raid5_conf_t *conf = mddev->private;
+	int new_chunk = mddev->new_chunk_sectors;
 
-	if (new_layout >= 0 && !algorithm_valid_raid5(new_layout))
+	if (mddev->new_layout >= 0 && !algorithm_valid_raid5(mddev->new_layout))
 		return -EINVAL;
 	if (new_chunk > 0) {
-		if (new_chunk & (new_chunk-1))
-			/* not a power of 2 */
+		if (!is_power_of_2(new_chunk))
 			return -EINVAL;
-		if (new_chunk < PAGE_SIZE)
+		if (new_chunk < (PAGE_SIZE>>9))
 			return -EINVAL;
-		if (mddev->array_sectors & ((new_chunk>>9)-1))
+		if (mddev->array_sectors & (new_chunk-1))
 			/* not factor of array size */
 			return -EINVAL;
 	}
@@ -5175,49 +5195,39 @@ static int raid5_reconfig(mddev_t *mddev, int new_layout, int new_chunk)
 	/* They look valid */
 
 	if (mddev->raid_disks == 2) {
-
-		if (new_layout >= 0) {
-			conf->algorithm = new_layout;
-			mddev->layout = mddev->new_layout = new_layout;
+		/* can make the change immediately */
+		if (mddev->new_layout >= 0) {
+			conf->algorithm = mddev->new_layout;
+			mddev->layout = mddev->new_layout;
 		}
 		if (new_chunk > 0) {
-			conf->chunk_size = new_chunk;
-			mddev->chunk_size = mddev->new_chunk = new_chunk;
+			conf->chunk_sectors = new_chunk ;
+			mddev->chunk_sectors = new_chunk;
 		}
 		set_bit(MD_CHANGE_DEVS, &mddev->flags);
 		md_wakeup_thread(mddev->thread);
-	} else {
-		if (new_layout >= 0)
-			mddev->new_layout = new_layout;
-		if (new_chunk > 0)
-			mddev->new_chunk = new_chunk;
 	}
-	return 0;
+	return check_reshape(mddev);
 }
 
-static int raid6_reconfig(mddev_t *mddev, int new_layout, int new_chunk)
+static int raid6_check_reshape(mddev_t *mddev)
 {
-	if (new_layout >= 0 && !algorithm_valid_raid6(new_layout))
+	int new_chunk = mddev->new_chunk_sectors;
+
+	if (mddev->new_layout >= 0 && !algorithm_valid_raid6(mddev->new_layout))
 		return -EINVAL;
 	if (new_chunk > 0) {
-		if (new_chunk & (new_chunk-1))
-			/* not a power of 2 */
+		if (!is_power_of_2(new_chunk))
 			return -EINVAL;
-		if (new_chunk < PAGE_SIZE)
+		if (new_chunk < (PAGE_SIZE >> 9))
 			return -EINVAL;
-		if (mddev->array_sectors & ((new_chunk>>9)-1))
+		if (mddev->array_sectors & (new_chunk-1))
 			/* not factor of array size */
 			return -EINVAL;
 	}
 
 	/* They look valid */
-
-	if (new_layout >= 0)
-		mddev->new_layout = new_layout;
-	if (new_chunk > 0)
-		mddev->new_chunk = new_chunk;
-
-	return 0;
+	return check_reshape(mddev);
 }
 
 static void *raid5_takeover(mddev_t *mddev)
@@ -5227,8 +5237,6 @@ static void *raid5_takeover(mddev_t *mddev)
 	 *  raid1 - if there are two drives.  We need to know the chunk size
 	 *  raid4 - trivial - just use a raid4 layout.
 	 *  raid6 - Providing it is a *_6 layout
-	 *
-	 * For now, just do raid1
 	 */
 
 	if (mddev->level == 1)
@@ -5310,12 +5318,11 @@ static struct mdk_personality raid6_personality =
 	.sync_request	= sync_request,
 	.resize		= raid5_resize,
 	.size		= raid5_size,
-	.check_reshape	= raid5_check_reshape,
+	.check_reshape	= raid6_check_reshape,
 	.start_reshape  = raid5_start_reshape,
 	.finish_reshape = raid5_finish_reshape,
 	.quiesce	= raid5_quiesce,
 	.takeover	= raid6_takeover,
-	.reconfig	= raid6_reconfig,
 };
 static struct mdk_personality raid5_personality =
 {
@@ -5338,7 +5345,6 @@ static struct mdk_personality raid5_personality =
 	.finish_reshape = raid5_finish_reshape,
 	.quiesce	= raid5_quiesce,
 	.takeover	= raid5_takeover,
-	.reconfig	= raid5_reconfig,
 };
 
 static struct mdk_personality raid4_personality =
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h
index 52ba99954de..9459689c4ea 100644
--- a/drivers/md/raid5.h
+++ b/drivers/md/raid5.h
@@ -334,7 +334,8 @@ struct raid5_private_data {
 	struct hlist_head	*stripe_hashtbl;
 	mddev_t			*mddev;
 	struct disk_info	*spare;
-	int			chunk_size, level, algorithm;
+	int			chunk_sectors;
+	int			level, algorithm;
 	int			max_degraded;
 	int			raid_disks;
 	int			max_nr_stripes;
@@ -350,7 +351,8 @@ struct raid5_private_data {
 	 */
 	sector_t		reshape_safe;
 	int			previous_raid_disks;
-	int			prev_chunk, prev_algo;
+	int			prev_chunk_sectors;
+	int			prev_algo;
 	short			generation; /* increments with every reshape */
 	unsigned long		reshape_checkpoint; /* Time we last updated
 						     * metadata */
@@ -408,8 +410,6 @@ struct raid5_private_data {
 
 typedef struct raid5_private_data raid5_conf_t;
 
-#define mddev_to_conf(mddev) ((raid5_conf_t *) mddev->private)
-
 /*
  * Our supported algorithms
  */
diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c
index 3fe158ac7bb..4216328552f 100644
--- a/drivers/media/common/ir-keymaps.c
+++ b/drivers/media/common/ir-keymaps.c
@@ -2750,3 +2750,26 @@ IR_KEYTAB_TYPE ir_codes_dm1105_nec[IR_KEYTAB_SIZE] = {
 	[0x1b] = KEY_B,		/*recall*/
 };
 EXPORT_SYMBOL_GPL(ir_codes_dm1105_nec);
+
+/* EVGA inDtube
+   Devin Heitmueller <devin.heitmueller@gmail.com>
+ */
+IR_KEYTAB_TYPE ir_codes_evga_indtube[IR_KEYTAB_SIZE] = {
+	[0x12] = KEY_POWER,
+	[0x02] = KEY_MODE,	/* TV */
+	[0x14] = KEY_MUTE,
+	[0x1a] = KEY_CHANNELUP,
+	[0x16] = KEY_TV2,	/* PIP */
+	[0x1d] = KEY_VOLUMEUP,
+	[0x05] = KEY_CHANNELDOWN,
+	[0x0f] = KEY_PLAYPAUSE,
+	[0x19] = KEY_VOLUMEDOWN,
+	[0x1c] = KEY_REWIND,
+	[0x0d] = KEY_RECORD,
+	[0x18] = KEY_FORWARD,
+	[0x1e] = KEY_PREVIOUS,
+	[0x1b] = KEY_STOP,
+	[0x1f] = KEY_NEXT,
+	[0x13] = KEY_CAMERA,
+};
+EXPORT_SYMBOL_GPL(ir_codes_evga_indtube);
diff --git a/drivers/media/dvb/frontends/stv0900.h b/drivers/media/dvb/frontends/stv0900.h
index 8a1332c2031..bf4e9b63304 100644
--- a/drivers/media/dvb/frontends/stv0900.h
+++ b/drivers/media/dvb/frontends/stv0900.h
@@ -29,6 +29,11 @@
 #include <linux/dvb/frontend.h>
 #include "dvb_frontend.h"
 
+struct stv0900_reg {
+	u16 addr;
+	u8  val;
+};
+
 struct stv0900_config {
 	u8 demod_address;
 	u32 xtal;
@@ -38,7 +43,7 @@ struct stv0900_config {
 
 	u8 path1_mode;
 	u8 path2_mode;
-
+	struct stv0900_reg *ts_config_regs;
 	u8 tun1_maddress;/* 0, 1, 2, 3 for 0xc0, 0xc2, 0xc4, 0xc6 */
 	u8 tun2_maddress;
 	u8 tun1_adc;/* 1 for stv6110, 2 for stb6100 */
diff --git a/drivers/media/dvb/frontends/stv0900_core.c b/drivers/media/dvb/frontends/stv0900_core.c
index 8499bcf7f25..1da045fbb4e 100644
--- a/drivers/media/dvb/frontends/stv0900_core.c
+++ b/drivers/media/dvb/frontends/stv0900_core.c
@@ -149,31 +149,31 @@ void stv0900_write_reg(struct stv0900_internal *i_params, u16 reg_addr,
 		dprintk(KERN_ERR "%s: i2c error %d\n", __func__, ret);
 }
 
-u8 stv0900_read_reg(struct stv0900_internal *i_params, u16 reg_addr)
+u8 stv0900_read_reg(struct stv0900_internal *i_params, u16 reg)
 {
-	u8 data[2];
 	int ret;
-	struct i2c_msg i2cmsg = {
-		.addr  = i_params->i2c_addr,
-		.flags = 0,
-		.len   = 2,
-		.buf   = data,
+	u8 b0[] = { MSB(reg), LSB(reg) };
+	u8 buf = 0;
+	struct i2c_msg msg[] = {
+		{
+			.addr	= i_params->i2c_addr,
+			.flags	= 0,
+			.buf = b0,
+			.len = 2,
+		}, {
+			.addr	= i_params->i2c_addr,
+			.flags	= I2C_M_RD,
+			.buf = &buf,
+			.len = 1,
+		},
 	};
 
-	data[0] = MSB(reg_addr);
-	data[1] = LSB(reg_addr);
-
-	ret = i2c_transfer(i_params->i2c_adap, &i2cmsg, 1);
-	if (ret != 1)
-		dprintk(KERN_ERR "%s: i2c error %d\n", __func__, ret);
-
-	i2cmsg.flags = I2C_M_RD;
-	i2cmsg.len = 1;
-	ret = i2c_transfer(i_params->i2c_adap, &i2cmsg, 1);
-	if (ret != 1)
-		dprintk(KERN_ERR "%s: i2c error %d\n", __func__, ret);
+	ret = i2c_transfer(i_params->i2c_adap, msg, 2);
+	if (ret != 2)
+		dprintk(KERN_ERR "%s: i2c error %d, reg[0x%02x]\n",
+				__func__, ret, reg);
 
-	return data[0];
+	return buf;
 }
 
 void extract_mask_pos(u32 label, u8 *mask, u8 *pos)
@@ -712,6 +712,44 @@ static s32 stv0900_carr_get_quality(struct dvb_frontend *fe,
 	return c_n;
 }
 
+static int stv0900_read_ucblocks(struct dvb_frontend *fe, u32 * ucblocks)
+{
+	struct stv0900_state *state = fe->demodulator_priv;
+	struct stv0900_internal *i_params = state->internal;
+	enum fe_stv0900_demod_num demod = state->demod;
+	u8 err_val1, err_val0;
+	s32 err_field1, err_field0;
+	u32 header_err_val = 0;
+
+	*ucblocks = 0x0;
+	if (stv0900_get_standard(fe, demod) == STV0900_DVBS2_STANDARD) {
+		/* DVB-S2 delineator errors count */
+
+		/* retreiving number for errnous headers */
+		dmd_reg(err_field0, R0900_P1_BBFCRCKO0,
+					R0900_P2_BBFCRCKO0);
+		dmd_reg(err_field1, R0900_P1_BBFCRCKO1,
+					R0900_P2_BBFCRCKO1);
+
+		err_val1 = stv0900_read_reg(i_params, err_field1);
+		err_val0 = stv0900_read_reg(i_params, err_field0);
+		header_err_val = (err_val1<<8) | err_val0;
+
+		/* retreiving number for errnous packets */
+		dmd_reg(err_field0, R0900_P1_UPCRCKO0,
+					R0900_P2_UPCRCKO0);
+		dmd_reg(err_field1, R0900_P1_UPCRCKO1,
+					R0900_P2_UPCRCKO1);
+
+		err_val1 = stv0900_read_reg(i_params, err_field1);
+		err_val0 = stv0900_read_reg(i_params, err_field0);
+		*ucblocks = (err_val1<<8) | err_val0;
+		*ucblocks += header_err_val;
+	}
+
+	return 0;
+}
+
 static int stv0900_read_snr(struct dvb_frontend *fe, u16 *snr)
 {
 	*snr = stv0900_carr_get_quality(fe,
@@ -1355,7 +1393,7 @@ static enum fe_stv0900_error stv0900_init_internal(struct dvb_frontend *fe,
 	struct stv0900_state *state = fe->demodulator_priv;
 	enum fe_stv0900_error error = STV0900_NO_ERROR;
 	enum fe_stv0900_error demodError = STV0900_NO_ERROR;
-	int selosci;
+	int selosci, i;
 
 	struct stv0900_inode *temp_int = find_inode(state->i2c_adap,
 						state->config->demod_address);
@@ -1402,7 +1440,23 @@ static enum fe_stv0900_error stv0900_init_internal(struct dvb_frontend *fe,
 				stv0900_write_bits(state->internal, F0900_P1_ROLLOFF_CONTROL, p_init->rolloff);
 				stv0900_write_bits(state->internal, F0900_P2_ROLLOFF_CONTROL, p_init->rolloff);
 
-				stv0900_set_ts_parallel_serial(state->internal, p_init->path1_ts_clock, p_init->path2_ts_clock);
+				state->internal->ts_config = p_init->ts_config;
+				if (state->internal->ts_config == NULL)
+					stv0900_set_ts_parallel_serial(state->internal,
+							p_init->path1_ts_clock,
+							p_init->path2_ts_clock);
+				else {
+					for (i = 0; state->internal->ts_config[i].addr != 0xffff; i++)
+						stv0900_write_reg(state->internal,
+								state->internal->ts_config[i].addr,
+								state->internal->ts_config[i].val);
+
+					stv0900_write_bits(state->internal, F0900_P2_RST_HWARE, 1);
+					stv0900_write_bits(state->internal, F0900_P2_RST_HWARE, 0);
+					stv0900_write_bits(state->internal, F0900_P1_RST_HWARE, 1);
+					stv0900_write_bits(state->internal, F0900_P1_RST_HWARE, 0);
+				}
+
 				stv0900_write_bits(state->internal, F0900_P1_TUN_MADDRESS, p_init->tun1_maddress);
 				switch (p_init->tuner1_adc) {
 				case 1:
@@ -1882,6 +1936,7 @@ static struct dvb_frontend_ops stv0900_ops = {
 	.read_ber			= stv0900_read_ber,
 	.read_signal_strength		= stv0900_read_signal_strength,
 	.read_snr			= stv0900_read_snr,
+	.read_ucblocks                  = stv0900_read_ucblocks,
 };
 
 struct dvb_frontend *stv0900_attach(const struct stv0900_config *config,
@@ -1915,6 +1970,7 @@ struct dvb_frontend *stv0900_attach(const struct stv0900_config *config,
 		init_params.tun1_iq_inversion	= STV0900_IQ_NORMAL;
 		init_params.tuner1_adc		= config->tun1_adc;
 		init_params.path2_ts_clock	= config->path2_mode;
+		init_params.ts_config		= config->ts_config_regs;
 		init_params.tun2_maddress	= config->tun2_maddress;
 		init_params.tuner2_adc		= config->tun2_adc;
 		init_params.tun2_iq_inversion	= STV0900_IQ_SWAPPED;
diff --git a/drivers/media/dvb/frontends/stv0900_priv.h b/drivers/media/dvb/frontends/stv0900_priv.h
index 67dc8ec634e..5ed7a145c7d 100644
--- a/drivers/media/dvb/frontends/stv0900_priv.h
+++ b/drivers/media/dvb/frontends/stv0900_priv.h
@@ -271,6 +271,7 @@ struct stv0900_init_params{
 
 	/* IQ from the tuner2 to the demod */
 	enum stv0900_iq_inversion	tun2_iq_inversion;
+	struct stv0900_reg		*ts_config;
 };
 
 struct stv0900_search_params {
@@ -363,6 +364,7 @@ struct stv0900_internal{
 	u8			i2c_addr;
 	u8			clkmode;/* 0 for CLKI, 2 for XTALI */
 	u8			chip_id;
+	struct stv0900_reg	*ts_config;
 	enum fe_stv0900_error	errs;
 	int dmds_used;
 };
diff --git a/drivers/media/dvb/frontends/stv090x.c b/drivers/media/dvb/frontends/stv090x.c
index 96ef745a2e4..488bdfb34fb 100644
--- a/drivers/media/dvb/frontends/stv090x.c
+++ b/drivers/media/dvb/frontends/stv090x.c
@@ -2674,7 +2674,7 @@ static u8 stv090x_optimize_carloop(struct stv090x_state *state, enum stv090x_mod
 
 static u8 stv090x_optimize_carloop_short(struct stv090x_state *state)
 {
-	struct stv090x_short_frame_crloop *short_crl;
+	struct stv090x_short_frame_crloop *short_crl = NULL;
 	s32 index = 0;
 	u8 aclc = 0x0b;
 
@@ -2694,10 +2694,13 @@ static u8 stv090x_optimize_carloop_short(struct stv090x_state *state)
 		break;
 	}
 
-	if (state->dev_ver >= 0x30)
-		short_crl = stv090x_s2_short_crl_cut20;
-	else if (state->dev_ver >= 0x20)
+	if (state->dev_ver >= 0x30) {
+		/* Cut 3.0 and up */
 		short_crl = stv090x_s2_short_crl_cut30;
+	} else {
+		/* Cut 2.0 and up: we don't support cuts older than 2.0 */
+		short_crl = stv090x_s2_short_crl_cut20;
+	}
 
 	if (state->srate <= 3000000)
 		aclc = short_crl[index].crl_2;
diff --git a/drivers/media/dvb/frontends/tda10048.c b/drivers/media/dvb/frontends/tda10048.c
index 4302c563a6b..cc8862ce4aa 100644
--- a/drivers/media/dvb/frontends/tda10048.c
+++ b/drivers/media/dvb/frontends/tda10048.c
@@ -210,6 +210,7 @@ static struct pll_tab {
 	{ TDA10048_CLK_4000,  TDA10048_IF_36130, 10, 0, 0 },
 	{ TDA10048_CLK_16000, TDA10048_IF_3300,  10, 3, 0 },
 	{ TDA10048_CLK_16000, TDA10048_IF_3500,  10, 3, 0 },
+	{ TDA10048_CLK_16000, TDA10048_IF_3800,  10, 3, 0 },
 	{ TDA10048_CLK_16000, TDA10048_IF_4000,  10, 3, 0 },
 	{ TDA10048_CLK_16000, TDA10048_IF_4300,  10, 3, 0 },
 	{ TDA10048_CLK_16000, TDA10048_IF_36130, 10, 3, 0 },
diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c
index 32be382f0e9..a246903c334 100644
--- a/drivers/media/dvb/siano/smscoreapi.c
+++ b/drivers/media/dvb/siano/smscoreapi.c
@@ -1422,8 +1422,8 @@ int smscore_gpio_configure(struct smscore_device_t *coredev, u8 PinNum,
 		struct smscore_gpio_config *pGpioConfig) {
 
 	u32 totalLen;
-	u32 TranslatedPinNum;
-	u32 GroupNum;
+	u32 TranslatedPinNum = 0;
+	u32 GroupNum = 0;
 	u32 ElectricChar;
 	u32 groupCfg;
 	void *buffer;
diff --git a/drivers/media/radio/radio-tea5764.c b/drivers/media/radio/radio-tea5764.c
index 393623818ad..3cd76dddb6a 100644
--- a/drivers/media/radio/radio-tea5764.c
+++ b/drivers/media/radio/radio-tea5764.c
@@ -322,7 +322,9 @@ static int vidioc_g_tuner(struct file *file, void *priv,
 	v->rangehigh  = FREQ_MAX * FREQ_MUL;
 	v->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO;
 	if (r->tunchk & TEA5764_TUNCHK_STEREO)
-			v->rxsubchans = V4L2_TUNER_SUB_STEREO;
+		v->rxsubchans = V4L2_TUNER_SUB_STEREO;
+	else
+		v->rxsubchans = V4L2_TUNER_SUB_MONO;
 	v->audmode = tea5764_get_audout_mode(radio);
 	v->signal = TEA5764_TUNCHK_LEVEL(r->tunchk) * 0xffff / 0xf;
 	v->afc = TEA5764_TUNCHK_IFCNT(r->tunchk);
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 94f440535c6..061e147f6f2 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -866,9 +866,13 @@ config USB_W9968CF
 	  module will be called w9968cf.
 
 config USB_OV511
-	tristate "USB OV511 Camera support"
+	tristate "USB OV511 Camera support (DEPRECATED)"
 	depends on VIDEO_V4L1
 	---help---
+	  This driver is DEPRECATED please use the gspca ov519 module
+	  instead. Note that for the ov511 / ov518 support of the gspca module
+	  you need atleast version 0.6.0 of libv4l.
+
 	  Say Y here if you want to connect this type of camera to your
 	  computer's USB port. See <file:Documentation/video4linux/ov511.txt>
 	  for more information and for a list of supported cameras.
diff --git a/drivers/media/video/cx18/cx18-controls.c b/drivers/media/video/cx18/cx18-controls.c
index 8e35c3aed54..5136df19833 100644
--- a/drivers/media/video/cx18/cx18-controls.c
+++ b/drivers/media/video/cx18/cx18-controls.c
@@ -61,6 +61,8 @@ int cx18_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *qctrl)
 
 	switch (qctrl->id) {
 	/* Standard V4L2 controls */
+	case V4L2_CID_USER_CLASS:
+		return v4l2_ctrl_query_fill(qctrl, 0, 0, 0, 0);
 	case V4L2_CID_BRIGHTNESS:
 	case V4L2_CID_HUE:
 	case V4L2_CID_SATURATION:
diff --git a/drivers/media/video/cx231xx/cx231xx-avcore.c b/drivers/media/video/cx231xx/cx231xx-avcore.c
index 6a9464079b4..28f48f41f21 100644
--- a/drivers/media/video/cx231xx/cx231xx-avcore.c
+++ b/drivers/media/video/cx231xx/cx231xx-avcore.c
@@ -1052,22 +1052,13 @@ int cx231xx_set_audio_decoder_input(struct cx231xx *dev,
 /* Set resolution of the video */
 int cx231xx_resolution_set(struct cx231xx *dev)
 {
-	int width, height;
-	u32 hscale, vscale;
-	int status = 0;
-
-	width = dev->width;
-	height = dev->height;
-
-	get_scale(dev, width, height, &hscale, &vscale);
-
 	/* set horzontal scale */
-	status = vid_blk_write_word(dev, HSCALE_CTRL, hscale);
+	int status = vid_blk_write_word(dev, HSCALE_CTRL, dev->hscale);
+	if (status)
+		return status;
 
 	/* set vertical scale */
-	status = vid_blk_write_word(dev, VSCALE_CTRL, vscale);
-
-	return status;
+	return vid_blk_write_word(dev, VSCALE_CTRL, dev->vscale);
 }
 
 /******************************************************************************
@@ -2055,7 +2046,7 @@ int cx231xx_initialize_stream_xfer(struct cx231xx *dev, u32 media_type)
 
 int cx231xx_capture_start(struct cx231xx *dev, int start, u8 media_type)
 {
-	int rc;
+	int rc = -1;
 	u32 ep_mask = -1;
 	struct pcb_config *pcb_config;
 
diff --git a/drivers/media/video/cx231xx/cx231xx-video.c b/drivers/media/video/cx231xx/cx231xx-video.c
index a23ae73fe63..609bae6098d 100644
--- a/drivers/media/video/cx231xx/cx231xx-video.c
+++ b/drivers/media/video/cx231xx/cx231xx-video.c
@@ -893,9 +893,9 @@ static int check_dev(struct cx231xx *dev)
 	return 0;
 }
 
-void get_scale(struct cx231xx *dev,
-	       unsigned int width, unsigned int height,
-	       unsigned int *hscale, unsigned int *vscale)
+static void get_scale(struct cx231xx *dev,
+		      unsigned int width, unsigned int height,
+		      unsigned int *hscale, unsigned int *vscale)
 {
 	unsigned int maxw = norm_maxw(dev);
 	unsigned int maxh = norm_maxh(dev);
@@ -907,10 +907,6 @@ void get_scale(struct cx231xx *dev,
 	*vscale = (((unsigned long)maxh) << 12) / height - 4096L;
 	if (*vscale >= 0x4000)
 		*vscale = 0x3fff;
-
-	dev->hscale = *hscale;
-	dev->vscale = *vscale;
-
 }
 
 /* ------------------------------------------------------------------
@@ -955,8 +951,8 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 {
 	struct cx231xx_fh *fh = priv;
 	struct cx231xx *dev = fh->dev;
-	int width = f->fmt.pix.width;
-	int height = f->fmt.pix.height;
+	unsigned int width = f->fmt.pix.width;
+	unsigned int height = f->fmt.pix.height;
 	unsigned int maxw = norm_maxw(dev);
 	unsigned int maxh = norm_maxh(dev);
 	unsigned int hscale, vscale;
@@ -971,17 +967,7 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 
 	/* width must even because of the YUYV format
 	   height must be even because of interlacing */
-	height &= 0xfffe;
-	width &= 0xfffe;
-
-	if (unlikely(height < 32))
-		height = 32;
-	if (unlikely(height > maxh))
-		height = maxh;
-	if (unlikely(width < 48))
-		width = 48;
-	if (unlikely(width > maxw))
-		width = maxw;
+	v4l_bound_align_image(&width, 48, maxw, 1, &height, 32, maxh, 1, 0);
 
 	get_scale(dev, width, height, &hscale, &vscale);
 
diff --git a/drivers/media/video/cx231xx/cx231xx.h b/drivers/media/video/cx231xx/cx231xx.h
index e38eb2d425f..a0f823ac6b8 100644
--- a/drivers/media/video/cx231xx/cx231xx.h
+++ b/drivers/media/video/cx231xx/cx231xx.h
@@ -722,9 +722,6 @@ int cx231xx_set_video_input_mux(struct cx231xx *dev, u8 input);
 int cx231xx_set_decoder_video_input(struct cx231xx *dev, u8 pin_type, u8 input);
 int cx231xx_do_mode_ctrl_overrides(struct cx231xx *dev);
 int cx231xx_set_audio_input(struct cx231xx *dev, u8 input);
-void get_scale(struct cx231xx *dev,
-	       unsigned int width, unsigned int height,
-	       unsigned int *hscale, unsigned int *vscale);
 
 /* Provided by cx231xx-video.c */
 int cx231xx_register_extension(struct cx231xx_ops *dev);
diff --git a/drivers/media/video/cx2341x.c b/drivers/media/video/cx2341x.c
index 8ded5294633..4c8e95853fa 100644
--- a/drivers/media/video/cx2341x.c
+++ b/drivers/media/video/cx2341x.c
@@ -500,6 +500,8 @@ int cx2341x_ctrl_query(const struct cx2341x_mpeg_params *params,
 	int err;
 
 	switch (qctrl->id) {
+	case V4L2_CID_MPEG_CLASS:
+		return v4l2_ctrl_query_fill(qctrl, 0, 0, 0, 0);
 	case V4L2_CID_MPEG_STREAM_TYPE:
 		return v4l2_ctrl_query_fill(qctrl,
 				V4L2_MPEG_STREAM_TYPE_MPEG2_PS,
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index e236df23370..48a975134ac 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -45,6 +45,7 @@
 #include "dibx000_common.h"
 #include "zl10353.h"
 #include "stv0900.h"
+#include "stv0900_reg.h"
 #include "stv6110.h"
 #include "lnbh24.h"
 #include "cx24116.h"
@@ -242,12 +243,22 @@ static struct tda18271_std_map hauppauge_tda18271_std_map = {
 		      .if_lvl = 6, .rfagc_top = 0x37 },
 };
 
+static struct tda18271_std_map hauppauge_hvr1200_tda18271_std_map = {
+	.dvbt_6   = { .if_freq = 3300, .agc_mode = 3, .std = 4,
+		      .if_lvl = 1, .rfagc_top = 0x37, },
+	.dvbt_7   = { .if_freq = 3800, .agc_mode = 3, .std = 5,
+		      .if_lvl = 1, .rfagc_top = 0x37, },
+	.dvbt_8   = { .if_freq = 4300, .agc_mode = 3, .std = 6,
+		      .if_lvl = 1, .rfagc_top = 0x37, },
+};
+
 static struct tda18271_config hauppauge_tda18271_config = {
 	.std_map = &hauppauge_tda18271_std_map,
 	.gate    = TDA18271_GATE_ANALOG,
 };
 
 static struct tda18271_config hauppauge_hvr1200_tuner_config = {
+	.std_map = &hauppauge_hvr1200_tda18271_std_map,
 	.gate    = TDA18271_GATE_ANALOG,
 };
 
@@ -370,13 +381,25 @@ static struct zl10353_config dvico_fusionhdtv_xc3028 = {
 	.disable_i2c_gate_ctrl = 1,
 };
 
+static struct stv0900_reg stv0900_ts_regs[] = {
+	{ R0900_TSGENERAL, 0x00 },
+	{ R0900_P1_TSSPEED, 0x40 },
+	{ R0900_P2_TSSPEED, 0x40 },
+	{ R0900_P1_TSCFGM, 0xc0 },
+	{ R0900_P2_TSCFGM, 0xc0 },
+	{ R0900_P1_TSCFGH, 0xe0 },
+	{ R0900_P2_TSCFGH, 0xe0 },
+	{ R0900_P1_TSCFGL, 0x20 },
+	{ R0900_P2_TSCFGL, 0x20 },
+	{ 0xffff, 0xff }, /* terminate */
+};
+
 static struct stv0900_config netup_stv0900_config = {
 	.demod_address = 0x68,
 	.xtal = 27000000,
 	.clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
 	.diseqc_mode = 2,/* 2/3 PWM */
-	.path1_mode = 2,/*Serial continues clock */
-	.path2_mode = 2,/*Serial continues clock */
+	.ts_config_regs = stv0900_ts_regs,
 	.tun1_maddress = 0,/* 0x60 */
 	.tun2_maddress = 3,/* 0x63 */
 	.tun1_adc = 1,/* 1 Vpp */
@@ -736,7 +759,8 @@ static int dvb_register(struct cx23885_tsport *port)
 					if (!dvb_attach(lnbh24_attach,
 							fe0->dvb.frontend,
 							&i2c_bus->i2c_adap,
-							LNBH24_PCL, 0, 0x09))
+							LNBH24_PCL,
+							LNBH24_TTX, 0x09))
 						printk(KERN_ERR
 							"No LNBH24 found!\n");
 
@@ -756,7 +780,8 @@ static int dvb_register(struct cx23885_tsport *port)
 					if (!dvb_attach(lnbh24_attach,
 							fe0->dvb.frontend,
 							&i2c_bus->i2c_adap,
-							LNBH24_PCL, 0, 0x0a))
+							LNBH24_PCL,
+							LNBH24_TTX, 0x0a))
 						printk(KERN_ERR
 							"No LNBH24 found!\n");
 
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index 66bbd2e7110..70836af3ab4 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -963,15 +963,8 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 	}
 
 	f->fmt.pix.field = field;
-	if (f->fmt.pix.height < 32)
-		f->fmt.pix.height = 32;
-	if (f->fmt.pix.height > maxh)
-		f->fmt.pix.height = maxh;
-	if (f->fmt.pix.width < 48)
-		f->fmt.pix.width = 48;
-	if (f->fmt.pix.width > maxw)
-		f->fmt.pix.width = maxw;
-	f->fmt.pix.width &= ~0x03;
+	v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2,
+			      &f->fmt.pix.height, 32, maxh, 0, 0);
 	f->fmt.pix.bytesperline =
 		(f->fmt.pix.width * fmt->depth) >> 3;
 	f->fmt.pix.sizeimage =
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index 94b7a52629d..a5cc1c1fc2d 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -1524,33 +1524,45 @@ static const struct cx88_board cx88_boards[] = {
 		},
 		.mpeg           = CX88_MPEG_DVB,
 	},
+	/* Terry Wu <terrywu2009@gmail.com> */
+	/* TV Audio :      set GPIO 2, 18, 19 value to 0, 1, 0 */
+	/* FM Audio :      set GPIO 2, 18, 19 value to 0, 0, 0 */
+	/* Line-in Audio : set GPIO 2, 18, 19 value to 0, 1, 1 */
+	/* Mute Audio :    set GPIO 2 value to 1               */
 	[CX88_BOARD_WINFAST_TV2000_XP_GLOBAL] = {
-		.name           = "Winfast TV2000 XP Global",
+		.name           = "Leadtek TV2000 XP Global",
 		.tuner_type     = TUNER_XC2028,
 		.tuner_addr     = 0x61,
+		.radio_type     = TUNER_XC2028,
+		.radio_addr     = 0x61,
 		.input          = { {
 			.type   = CX88_VMUX_TELEVISION,
 			.vmux   = 0,
-			.gpio0  = 0x0400, /* pin 2:mute = 0 (off?) */
+			.gpio0  = 0x0400,       /* pin 2 = 0 */
 			.gpio1  = 0x0000,
-			.gpio2  = 0x0800, /* pin 19:audio = 0 (tv) */
-
+			.gpio2  = 0x0C04,       /* pin 18 = 1, pin 19 = 0 */
+			.gpio3  = 0x0000,
 		}, {
 			.type   = CX88_VMUX_COMPOSITE1,
 			.vmux   = 1,
-			.gpio0  = 0x0400, /* probably?  or 0x0404 to turn mute on */
+			.gpio0  = 0x0400,       /* pin 2 = 0 */
 			.gpio1  = 0x0000,
-			.gpio2  = 0x0808, /* pin 19:audio = 1 (line) */
-
+			.gpio2  = 0x0C0C,       /* pin 18 = 1, pin 19 = 1 */
+			.gpio3  = 0x0000,
 		}, {
 			.type   = CX88_VMUX_SVIDEO,
 			.vmux   = 2,
+			.gpio0  = 0x0400,       /* pin 2 = 0 */
+			.gpio1  = 0x0000,
+			.gpio2  = 0x0C0C,       /* pin 18 = 1, pin 19 = 1 */
+			.gpio3  = 0x0000,
 		} },
 		.radio = {
 			.type   = CX88_RADIO,
-			.gpio0  = 0x004ff,
-			.gpio1  = 0x010ff,
-			.gpio2  = 0x0ff,
+			.gpio0  = 0x0400,        /* pin 2 = 0 */
+			.gpio1  = 0x0000,
+			.gpio2  = 0x0C00,       /* pin 18 = 0, pin 19 = 0 */
+			.gpio3  = 0x0000,
 		},
 	},
 	[CX88_BOARD_POWERCOLOR_REAL_ANGEL] = {
@@ -2438,6 +2450,41 @@ static const struct cx88_subid cx88_subids[] = {
 		.subvendor = 0x107d,
 		.subdevice = 0x6654,
 		.card      = CX88_BOARD_WINFAST_DTV1800H,
+	}, {
+		/* PVR2000 PAL Model [107d:6630] */
+		.subvendor = 0x107d,
+		.subdevice = 0x6630,
+		.card      = CX88_BOARD_LEADTEK_PVR2000,
+	}, {
+		/* PVR2000 PAL Model [107d:6638] */
+		.subvendor = 0x107d,
+		.subdevice = 0x6638,
+		.card      = CX88_BOARD_LEADTEK_PVR2000,
+	}, {
+		/* PVR2000 NTSC Model [107d:6631] */
+		.subvendor = 0x107d,
+		.subdevice = 0x6631,
+		.card      = CX88_BOARD_LEADTEK_PVR2000,
+	}, {
+		/* PVR2000 NTSC Model [107d:6637] */
+		.subvendor = 0x107d,
+		.subdevice = 0x6637,
+		.card      = CX88_BOARD_LEADTEK_PVR2000,
+	}, {
+		/* PVR2000 NTSC Model [107d:663d] */
+		.subvendor = 0x107d,
+		.subdevice = 0x663d,
+		.card      = CX88_BOARD_LEADTEK_PVR2000,
+	}, {
+		/* DV2000 NTSC Model [107d:6621] */
+		.subvendor = 0x107d,
+		.subdevice = 0x6621,
+		.card      = CX88_BOARD_WINFAST_DV2000,
+	}, {
+		/* TV2000 XP Global [107d:6618]  */
+		.subvendor = 0x107d,
+		.subdevice = 0x6618,
+		.card      = CX88_BOARD_WINFAST_TV2000_XP_GLOBAL,
 	},
 };
 
@@ -2446,12 +2493,6 @@ static const struct cx88_subid cx88_subids[] = {
 
 static void leadtek_eeprom(struct cx88_core *core, u8 *eeprom_data)
 {
-	/* This is just for the "Winfast 2000XP Expert" board ATM; I don't have data on
-	 * any others.
-	 *
-	 * Byte 0 is 1 on the NTSC board.
-	 */
-
 	if (eeprom_data[4] != 0x7d ||
 	    eeprom_data[5] != 0x10 ||
 	    eeprom_data[7] != 0x66) {
@@ -2459,8 +2500,19 @@ static void leadtek_eeprom(struct cx88_core *core, u8 *eeprom_data)
 		return;
 	}
 
-	core->board.tuner_type = (eeprom_data[6] == 0x13) ?
-		TUNER_PHILIPS_FM1236_MK3 : TUNER_PHILIPS_FM1216ME_MK3;
+	/* Terry Wu <terrywu2009@gmail.com> */
+	switch (eeprom_data[6]) {
+	case 0x13: /* SSID 6613 for TV2000 XP Expert NTSC Model */
+	case 0x21: /* SSID 6621 for DV2000 NTSC Model */
+	case 0x31: /* SSID 6631 for PVR2000 NTSC Model */
+	case 0x37: /* SSID 6637 for PVR2000 NTSC Model */
+	case 0x3d: /* SSID 6637 for PVR2000 NTSC Model */
+		core->board.tuner_type = TUNER_PHILIPS_FM1236_MK3;
+		break;
+	default:
+		core->board.tuner_type = TUNER_PHILIPS_FM1216ME_MK3;
+		break;
+	}
 
 	info_printk(core, "Leadtek Winfast 2000XP Expert config: "
 		    "tuner=%d, eeprom[0]=0x%02x\n",
@@ -2713,7 +2765,6 @@ static int cx88_xc2028_tuner_callback(struct cx88_core *core,
 {
 	/* Board-specific callbacks */
 	switch (core->boardnr) {
-	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
 	case CX88_BOARD_POWERCOLOR_REAL_ANGEL:
 	case CX88_BOARD_GENIATECH_X8000_MT:
 	case CX88_BOARD_KWORLD_ATSC_120:
@@ -2725,6 +2776,7 @@ static int cx88_xc2028_tuner_callback(struct cx88_core *core,
 	case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
 	case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
 		return cx88_dvico_xc2028_callback(core, command, arg);
+	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
 	case CX88_BOARD_WINFAST_DTV1800H:
 		return cx88_xc3028_winfast1800h_callback(core, command, arg);
 	}
@@ -2914,6 +2966,7 @@ static void cx88_card_setup_pre_i2c(struct cx88_core *core)
 		udelay(1000);
 		break;
 
+	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
 	case CX88_BOARD_WINFAST_DTV1800H:
 		/* GPIO 12 (xc3028 tuner reset) */
 		cx_set(MO_GP1_IO, 0x1010);
@@ -2950,6 +3003,7 @@ void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl)
 	case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
 		ctl->demod = XC3028_FE_OREN538;
 		break;
+	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
 	case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME:
 	case CX88_BOARD_PROLINK_PV_8000GT:
 		/*
@@ -2993,6 +3047,8 @@ static void cx88_card_setup(struct cx88_core *core)
 		if (0 == core->i2c_rc)
 			gdi_eeprom(core, eeprom);
 		break;
+	case CX88_BOARD_LEADTEK_PVR2000:
+	case CX88_BOARD_WINFAST_DV2000:
 	case CX88_BOARD_WINFAST2000XP_EXPERT:
 		if (0 == core->i2c_rc)
 			leadtek_eeprom(core, eeprom);
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 0ccac702bea..b12770848c0 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -1111,15 +1111,8 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 	}
 
 	f->fmt.pix.field = field;
-	if (f->fmt.pix.height < 32)
-		f->fmt.pix.height = 32;
-	if (f->fmt.pix.height > maxh)
-		f->fmt.pix.height = maxh;
-	if (f->fmt.pix.width < 48)
-		f->fmt.pix.width = 48;
-	if (f->fmt.pix.width > maxw)
-		f->fmt.pix.width = maxw;
-	f->fmt.pix.width &= ~0x03;
+	v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2,
+			      &f->fmt.pix.height, 32, maxh, 0, 0);
 	f->fmt.pix.bytesperline =
 		(f->fmt.pix.width * fmt->depth) >> 3;
 	f->fmt.pix.sizeimage =
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 00cc791a9e4..c43fdb9bc88 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -139,6 +139,24 @@ static struct em28xx_reg_seq kworld_330u_digital[] = {
 	{ -1,			-1,	-1,		-1},
 };
 
+/* Evga inDtube
+   GPIO0 - Enable digital power (s5h1409) - low to enable
+   GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
+   GPIO4 - xc3028 reset
+   GOP3  - s5h1409 reset
+ */
+static struct em28xx_reg_seq evga_indtube_analog[] = {
+	{EM28XX_R08_GPIO,	0x79,   0xff,		60},
+	{	-1,		-1,	-1,		-1},
+};
+
+static struct em28xx_reg_seq evga_indtube_digital[] = {
+	{EM28XX_R08_GPIO,	0x7a,	0xff,		 1},
+	{EM2880_R04_GPO,	0x04,	0xff,		10},
+	{EM2880_R04_GPO,	0x0c,	0xff,		 1},
+	{ -1,			-1,	-1,		-1},
+};
+
 /* Callback for the most boards */
 static struct em28xx_reg_seq default_tuner_gpio[] = {
 	{EM28XX_R08_GPIO,	EM_GPIO_4,	EM_GPIO_4,	10},
@@ -1449,6 +1467,33 @@ struct em28xx_board em28xx_boards[] = {
 			.gpio     = terratec_av350_unmute_gpio,
 		} },
 	},
+	[EM2882_BOARD_EVGA_INDTUBE] = {
+		.name         = "Evga inDtube",
+		.tuner_type   = TUNER_XC2028,
+		.tuner_gpio   = default_tuner_gpio,
+		.decoder      = EM28XX_TVP5150,
+		.xclk         = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
+		.mts_firmware = 1,
+		.has_dvb      = 1,
+		.dvb_gpio     = evga_indtube_digital,
+		.ir_codes     = ir_codes_evga_indtube,
+		.input        = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = TVP5150_COMPOSITE0,
+			.amux     = EM28XX_AMUX_VIDEO,
+			.gpio     = evga_indtube_analog,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = TVP5150_COMPOSITE1,
+			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = evga_indtube_analog,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = TVP5150_SVIDEO,
+			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = evga_indtube_analog,
+		} },
+	},
 };
 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
 
@@ -1571,6 +1616,7 @@ static struct em28xx_hash_table em28xx_eeprom_hash[] = {
 	{0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
 	{0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
 	{0x9567eb1a, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
+	{0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
 };
 
 /* I2C devicelist hash table for devices with generic USB IDs */
@@ -1834,6 +1880,10 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
 		ctl->demod = XC3028_FE_CHINA;
 		ctl->fname = XC2028_DEFAULT_FIRMWARE;
 		break;
+	case EM2882_BOARD_EVGA_INDTUBE:
+		ctl->demod = XC3028_FE_CHINA;
+		ctl->fname = XC3028L_DEFAULT_FIRMWARE;
+		break;
 	default:
 		ctl->demod = XC3028_FE_OREN538;
 	}
@@ -2101,6 +2151,12 @@ void em28xx_card_setup(struct em28xx *dev)
 	case EM2880_BOARD_MSI_DIGIVOX_AD:
 		if (!em28xx_hint_board(dev))
 			em28xx_set_model(dev);
+
+		/* In cases where we had to use a board hint, the call to
+		   em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
+		   so make the call now so the analog GPIOs are set properly
+		   before probing the i2c bus. */
+		em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
 		break;
 	}
 
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index 563dd2b1c8e..e7b47c8da8f 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -445,6 +445,7 @@ static int dvb_init(struct em28xx *dev)
 		}
 		break;
 	case EM2883_BOARD_KWORLD_HYBRID_330U:
+	case EM2882_BOARD_EVGA_INDTUBE:
 		dvb->frontend = dvb_attach(s5h1409_attach,
 					   &em28xx_s5h1409_with_xc3028,
 					   &dev->i2c_adap);
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 882796e84db..8fe1beecfff 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -687,8 +687,8 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 {
 	struct em28xx_fh      *fh    = priv;
 	struct em28xx         *dev   = fh->dev;
-	int                   width  = f->fmt.pix.width;
-	int                   height = f->fmt.pix.height;
+	unsigned int          width  = f->fmt.pix.width;
+	unsigned int          height = f->fmt.pix.height;
 	unsigned int          maxw   = norm_maxw(dev);
 	unsigned int          maxh   = norm_maxh(dev);
 	unsigned int          hscale, vscale;
@@ -701,34 +701,20 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 		return -EINVAL;
 	}
 
-	/* width must even because of the YUYV format
-	   height must be even because of interlacing */
-	height &= 0xfffe;
-	width  &= 0xfffe;
-
-	if (unlikely(height < 32))
-		height = 32;
-	if (unlikely(height > maxh))
-		height = maxh;
-	if (unlikely(width < 48))
-		width = 48;
-	if (unlikely(width > maxw))
-		width = maxw;
-
 	if (dev->board.is_em2800) {
 		/* the em2800 can only scale down to 50% */
-		if (height % (maxh / 2))
-			height = maxh;
-		if (width % (maxw / 2))
-			width = maxw;
-		/* according to empiatech support */
-		/* the MaxPacketSize is to small to support */
-		/* framesizes larger than 640x480 @ 30 fps */
-		/* or 640x576 @ 25 fps. As this would cut */
-		/* of a part of the image we prefer */
-		/* 360x576 or 360x480 for now */
+		height = height > (3 * maxh / 4) ? maxh : maxh / 2;
+		width = width > (3 * maxw / 4) ? maxw : maxw / 2;
+		/* According to empiatech support the MaxPacketSize is too small
+		 * to support framesizes larger than 640x480 @ 30 fps or 640x576
+		 * @ 25 fps.  As this would cut of a part of the image we prefer
+		 * 360x576 or 360x480 for now */
 		if (width == maxw && height == maxh)
 			width /= 2;
+	} else {
+		/* width must even because of the YUYV format
+		   height must be even because of interlacing */
+		v4l_bound_align_image(&width, 48, maxw, 1, &height, 32, maxh, 1, 0);
 	}
 
 	get_scale(dev, width, height, &hscale, &vscale);
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 8bf81be1da6..813ce45c2f9 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -106,6 +106,7 @@
 #define EM2860_BOARD_TERRATEC_GRABBY		  67
 #define EM2860_BOARD_TERRATEC_AV350		  68
 #define EM2882_BOARD_KWORLD_ATSC_315U		  69
+#define EM2882_BOARD_EVGA_INDTUBE		  70
 
 /* Limits minimum and default number of buffers */
 #define EM28XX_MIN_BUF 4
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index f7e0355ad64..1e89600986c 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -1042,13 +1042,11 @@ static int vidioc_queryctrl(struct file *file, void *priv,
 		for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) {
 			if (gspca_dev->ctrl_dis & (1 << i))
 				continue;
-			if (ctrls->qctrl.id < id)
+			if (gspca_dev->sd_desc->ctrls[i].qctrl.id < id)
 				continue;
-			if (ctrls != NULL) {
-				if (gspca_dev->sd_desc->ctrls[i].qctrl.id
+			if (ctrls && gspca_dev->sd_desc->ctrls[i].qctrl.id
 					    > ctrls->qctrl.id)
-					continue;
-			}
+				continue;
 			ctrls = &gspca_dev->sd_desc->ctrls[i];
 		}
 	} else {
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index 188866ac6ce..2f6e135d94b 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -50,12 +50,18 @@ static int i2c_detect_tries = 10;
 struct sd {
 	struct gspca_dev gspca_dev;		/* !! must be the first item */
 
+	__u8 packet_nr;
+
 	char bridge;
 #define BRIDGE_OV511		0
 #define BRIDGE_OV511PLUS	1
 #define BRIDGE_OV518		2
 #define BRIDGE_OV518PLUS	3
 #define BRIDGE_OV519		4
+#define BRIDGE_MASK		7
+
+	char invert_led;
+#define BRIDGE_INVERT_LED	8
 
 	/* Determined by sensor type */
 	__u8 sif;
@@ -65,22 +71,25 @@ struct sd {
 	__u8 colors;
 	__u8 hflip;
 	__u8 vflip;
+	__u8 autobrightness;
+	__u8 freq;
 
 	__u8 stopped;		/* Streaming is temporarily paused */
 
-	__u8 frame_rate;	/* current Framerate (OV519 only) */
-	__u8 clockdiv;		/* clockdiv override for OV519 only */
+	__u8 frame_rate;	/* current Framerate */
+	__u8 clockdiv;		/* clockdiv override */
 
 	char sensor;		/* Type of image sensor chip (SEN_*) */
 #define SEN_UNKNOWN 0
 #define SEN_OV6620 1
 #define SEN_OV6630 2
-#define SEN_OV7610 3
-#define SEN_OV7620 4
-#define SEN_OV7640 5
-#define SEN_OV7670 6
-#define SEN_OV76BE 7
-#define SEN_OV8610 8
+#define SEN_OV66308AF 3
+#define SEN_OV7610 4
+#define SEN_OV7620 5
+#define SEN_OV7640 6
+#define SEN_OV7670 7
+#define SEN_OV76BE 8
+#define SEN_OV8610 9
 };
 
 /* V4L2 controls supported by the driver */
@@ -94,11 +103,17 @@ static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val);
 static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setautobrightness(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getautobrightness(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val);
 static void setbrightness(struct gspca_dev *gspca_dev);
 static void setcontrast(struct gspca_dev *gspca_dev);
 static void setcolors(struct gspca_dev *gspca_dev);
+static void setautobrightness(struct sd *sd);
+static void setfreq(struct sd *sd);
 
-static struct ctrl sd_ctrls[] = {
+static const struct ctrl sd_ctrls[] = {
 	{
 	    {
 		.id      = V4L2_CID_BRIGHTNESS,
@@ -141,7 +156,7 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setcolors,
 	    .get = sd_getcolors,
 	},
-/* next controls work with ov7670 only */
+/* The flip controls work with ov7670 only */
 #define HFLIP_IDX 3
 	{
 	    {
@@ -172,6 +187,51 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setvflip,
 	    .get = sd_getvflip,
 	},
+#define AUTOBRIGHT_IDX 5
+	{
+	    {
+		.id      = V4L2_CID_AUTOBRIGHTNESS,
+		.type    = V4L2_CTRL_TYPE_BOOLEAN,
+		.name    = "Auto Brightness",
+		.minimum = 0,
+		.maximum = 1,
+		.step    = 1,
+#define AUTOBRIGHT_DEF 1
+		.default_value = AUTOBRIGHT_DEF,
+	    },
+	    .set = sd_setautobrightness,
+	    .get = sd_getautobrightness,
+	},
+#define FREQ_IDX 6
+	{
+	    {
+		.id	 = V4L2_CID_POWER_LINE_FREQUENCY,
+		.type    = V4L2_CTRL_TYPE_MENU,
+		.name    = "Light frequency filter",
+		.minimum = 0,
+		.maximum = 2,	/* 0: 0, 1: 50Hz, 2:60Hz */
+		.step    = 1,
+#define FREQ_DEF 0
+		.default_value = FREQ_DEF,
+	    },
+	    .set = sd_setfreq,
+	    .get = sd_getfreq,
+	},
+#define OV7670_FREQ_IDX 7
+	{
+	    {
+		.id	 = V4L2_CID_POWER_LINE_FREQUENCY,
+		.type    = V4L2_CTRL_TYPE_MENU,
+		.name    = "Light frequency filter",
+		.minimum = 0,
+		.maximum = 3,	/* 0: 0, 1: 50Hz, 2:60Hz 3: Auto Hz */
+		.step    = 1,
+#define OV7670_FREQ_DEF 3
+		.default_value = OV7670_FREQ_DEF,
+	    },
+	    .set = sd_setfreq,
+	    .get = sd_getfreq,
+	},
 };
 
 static const struct v4l2_pix_format ov519_vga_mode[] = {
@@ -187,11 +247,21 @@ static const struct v4l2_pix_format ov519_vga_mode[] = {
 		.priv = 0},
 };
 static const struct v4l2_pix_format ov519_sif_mode[] = {
+	{160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+		.bytesperline = 160,
+		.sizeimage = 160 * 120 * 3 / 8 + 590,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 3},
 	{176, 144, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 176,
 		.sizeimage = 176 * 144 * 3 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 1},
+	{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240 * 3 / 8 + 590,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 2},
 	{352, 288, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 352,
 		.sizeimage = 352 * 288 * 3 / 8 + 590,
@@ -199,42 +269,118 @@ static const struct v4l2_pix_format ov519_sif_mode[] = {
 		.priv = 0},
 };
 
+/* Note some of the sizeimage values for the ov511 / ov518 may seem
+   larger then necessary, however they need to be this big as the ov511 /
+   ov518 always fills the entire isoc frame, using 0 padding bytes when
+   it doesn't have any data. So with low framerates the amount of data
+   transfered can become quite large (libv4l will remove all the 0 padding
+   in userspace). */
 static const struct v4l2_pix_format ov518_vga_mode[] = {
 	{320, 240, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
 		.bytesperline = 320,
-		.sizeimage = 320 * 240 * 3 / 8 + 590,
+		.sizeimage = 320 * 240 * 3,
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 1},
 	{640, 480, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
 		.bytesperline = 640,
-		.sizeimage = 640 * 480 * 3 / 8 + 590,
+		.sizeimage = 640 * 480 * 2,
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 0},
 };
 static const struct v4l2_pix_format ov518_sif_mode[] = {
+	{160, 120, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
+		.bytesperline = 160,
+		.sizeimage = 70000,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 3},
 	{176, 144, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
 		.bytesperline = 176,
-		.sizeimage = 40000,
+		.sizeimage = 70000,
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 1},
+	{320, 240, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240 * 3,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 2},
 	{352, 288, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
 		.bytesperline = 352,
-		.sizeimage = 352 * 288 * 3 / 8 + 590,
+		.sizeimage = 352 * 288 * 3,
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 0},
 };
 
+static const struct v4l2_pix_format ov511_vga_mode[] = {
+	{320, 240, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240 * 3,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 1},
+	{640, 480, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE,
+		.bytesperline = 640,
+		.sizeimage = 640 * 480 * 2,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 0},
+};
+static const struct v4l2_pix_format ov511_sif_mode[] = {
+	{160, 120, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE,
+		.bytesperline = 160,
+		.sizeimage = 70000,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 3},
+	{176, 144, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE,
+		.bytesperline = 176,
+		.sizeimage = 70000,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 1},
+	{320, 240, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240 * 3,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 2},
+	{352, 288, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE,
+		.bytesperline = 352,
+		.sizeimage = 352 * 288 * 3,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 0},
+};
 
 /* Registers common to OV511 / OV518 */
+#define R51x_FIFO_PSIZE			0x30	/* 2 bytes wide w/ OV518(+) */
 #define R51x_SYS_RESET          	0x50
+	/* Reset type flags */
+	#define	OV511_RESET_OMNICE	0x08
 #define R51x_SYS_INIT         		0x53
 #define R51x_SYS_SNAP			0x52
 #define R51x_SYS_CUST_ID		0x5F
 #define R51x_COMP_LUT_BEGIN		0x80
 
 /* OV511 Camera interface register numbers */
+#define R511_CAM_DELAY			0x10
+#define R511_CAM_EDGE			0x11
+#define R511_CAM_PXCNT			0x12
+#define R511_CAM_LNCNT			0x13
+#define R511_CAM_PXDIV			0x14
+#define R511_CAM_LNDIV			0x15
+#define R511_CAM_UV_EN			0x16
+#define R511_CAM_LINE_MODE		0x17
+#define R511_CAM_OPTS			0x18
+
+#define R511_SNAP_FRAME			0x19
+#define R511_SNAP_PXCNT			0x1A
+#define R511_SNAP_LNCNT			0x1B
+#define R511_SNAP_PXDIV			0x1C
+#define R511_SNAP_LNDIV			0x1D
+#define R511_SNAP_UV_EN			0x1E
+#define R511_SNAP_UV_EN			0x1E
+#define R511_SNAP_OPTS			0x1F
+
+#define R511_DRAM_FLOW_CTL		0x20
+#define R511_FIFO_OPTS			0x31
+#define R511_I2C_CTL			0x40
 #define R511_SYS_LED_CTL		0x55	/* OV511+ only */
-#define	OV511_RESET_NOREGS		0x3F	/* All but OV511 & regs */
+#define R511_COMP_EN			0x78
+#define R511_COMP_LUT_EN		0x79
 
 /* OV518 Camera interface register numbers */
 #define R518_GPIO_OUT			0x56	/* OV518(+) only */
@@ -383,7 +529,7 @@ static const struct ov_i2c_regvals norm_6x20[] = {
 	{ 0x28, 0x05 },
 	{ 0x2a, 0x04 }, /* Disable framerate adjust */
 /*	{ 0x2b, 0xac },  * Framerate; Set 2a[7] first */
-	{ 0x2d, 0x99 },
+	{ 0x2d, 0x85 },
 	{ 0x33, 0xa0 }, /* Color Processing Parameter */
 	{ 0x34, 0xd2 }, /* Max A/D range */
 	{ 0x38, 0x8b },
@@ -416,7 +562,7 @@ static const struct ov_i2c_regvals norm_6x30[] = {
 	{ 0x07, 0x2d }, /* Sharpness */
 	{ 0x0c, 0x20 },
 	{ 0x0d, 0x20 },
-	{ 0x0e, 0x20 },
+	{ 0x0e, 0xa0 }, /* Was 0x20, bit7 enables a 2x gain which we need */
 	{ 0x0f, 0x05 },
 	{ 0x10, 0x9a },
 	{ 0x11, 0x00 }, /* Pixel clock = fastest */
@@ -558,7 +704,7 @@ static const struct ov_i2c_regvals norm_7620[] = {
 	{ 0x23, 0x00 },
 	{ 0x26, 0xa2 },
 	{ 0x27, 0xea },
-	{ 0x28, 0x20 },
+	{ 0x28, 0x22 }, /* Was 0x20, bit1 enables a 2x gain which we need */
 	{ 0x29, 0x00 },
 	{ 0x2a, 0x10 },
 	{ 0x2b, 0x00 },
@@ -999,13 +1145,128 @@ static int ov518_reg_w32(struct sd *sd, __u16 index, u32 value, int n)
 	return ret;
 }
 
+static int ov511_i2c_w(struct sd *sd, __u8 reg, __u8 value)
+{
+	int rc, retries;
+
+	PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg);
+
+	/* Three byte write cycle */
+	for (retries = 6; ; ) {
+		/* Select camera register */
+		rc = reg_w(sd, R51x_I2C_SADDR_3, reg);
+		if (rc < 0)
+			return rc;
+
+		/* Write "value" to I2C data port of OV511 */
+		rc = reg_w(sd, R51x_I2C_DATA, value);
+		if (rc < 0)
+			return rc;
+
+		/* Initiate 3-byte write cycle */
+		rc = reg_w(sd, R511_I2C_CTL, 0x01);
+		if (rc < 0)
+			return rc;
+
+		do
+			rc = reg_r(sd, R511_I2C_CTL);
+		while (rc > 0 && ((rc & 1) == 0)); /* Retry until idle */
+
+		if (rc < 0)
+			return rc;
+
+		if ((rc & 2) == 0) /* Ack? */
+			break;
+		if (--retries < 0) {
+			PDEBUG(D_USBO, "i2c write retries exhausted");
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+static int ov511_i2c_r(struct sd *sd, __u8 reg)
+{
+	int rc, value, retries;
+
+	/* Two byte write cycle */
+	for (retries = 6; ; ) {
+		/* Select camera register */
+		rc = reg_w(sd, R51x_I2C_SADDR_2, reg);
+		if (rc < 0)
+			return rc;
+
+		/* Initiate 2-byte write cycle */
+		rc = reg_w(sd, R511_I2C_CTL, 0x03);
+		if (rc < 0)
+			return rc;
+
+		do
+			rc = reg_r(sd, R511_I2C_CTL);
+		while (rc > 0 && ((rc & 1) == 0)); /* Retry until idle */
+
+		if (rc < 0)
+			return rc;
+
+		if ((rc & 2) == 0) /* Ack? */
+			break;
+
+		/* I2C abort */
+		reg_w(sd, R511_I2C_CTL, 0x10);
+
+		if (--retries < 0) {
+			PDEBUG(D_USBI, "i2c write retries exhausted");
+			return -1;
+		}
+	}
+
+	/* Two byte read cycle */
+	for (retries = 6; ; ) {
+		/* Initiate 2-byte read cycle */
+		rc = reg_w(sd, R511_I2C_CTL, 0x05);
+		if (rc < 0)
+			return rc;
+
+		do
+			rc = reg_r(sd, R511_I2C_CTL);
+		while (rc > 0 && ((rc & 1) == 0)); /* Retry until idle */
+
+		if (rc < 0)
+			return rc;
+
+		if ((rc & 2) == 0) /* Ack? */
+			break;
+
+		/* I2C abort */
+		rc = reg_w(sd, R511_I2C_CTL, 0x10);
+		if (rc < 0)
+			return rc;
+
+		if (--retries < 0) {
+			PDEBUG(D_USBI, "i2c read retries exhausted");
+			return -1;
+		}
+	}
+
+	value = reg_r(sd, R51x_I2C_DATA);
+
+	PDEBUG(D_USBI, "i2c [0x%02X] -> 0x%02X", reg, value);
+
+	/* This is needed to make i2c_w() work */
+	rc = reg_w(sd, R511_I2C_CTL, 0x05);
+	if (rc < 0)
+		return rc;
+
+	return value;
+}
 
 /*
  * The OV518 I2C I/O procedure is different, hence, this function.
  * This is normally only called from i2c_w(). Note that this function
  * always succeeds regardless of whether the sensor is present and working.
  */
-static int i2c_w(struct sd *sd,
+static int ov518_i2c_w(struct sd *sd,
 		__u8 reg,
 		__u8 value)
 {
@@ -1040,7 +1301,7 @@ static int i2c_w(struct sd *sd,
  * This is normally only called from i2c_r(). Note that this function
  * always succeeds regardless of whether the sensor is present and working.
  */
-static int i2c_r(struct sd *sd, __u8 reg)
+static int ov518_i2c_r(struct sd *sd, __u8 reg)
 {
 	int rc, value;
 
@@ -1063,6 +1324,34 @@ static int i2c_r(struct sd *sd, __u8 reg)
 	return value;
 }
 
+static int i2c_w(struct sd *sd, __u8 reg, __u8 value)
+{
+	switch (sd->bridge) {
+	case BRIDGE_OV511:
+	case BRIDGE_OV511PLUS:
+		return ov511_i2c_w(sd, reg, value);
+	case BRIDGE_OV518:
+	case BRIDGE_OV518PLUS:
+	case BRIDGE_OV519:
+		return ov518_i2c_w(sd, reg, value);
+	}
+	return -1; /* Should never happen */
+}
+
+static int i2c_r(struct sd *sd, __u8 reg)
+{
+	switch (sd->bridge) {
+	case BRIDGE_OV511:
+	case BRIDGE_OV511PLUS:
+		return ov511_i2c_r(sd, reg);
+	case BRIDGE_OV518:
+	case BRIDGE_OV518PLUS:
+	case BRIDGE_OV519:
+		return ov518_i2c_r(sd, reg);
+	}
+	return -1; /* Should never happen */
+}
+
 /* Writes bits at positions specified by mask to an I2C reg. Bits that are in
  * the same position as 1's in "mask" are cleared and set to "value". Bits
  * that are in the same position as 0's in "mask" are preserved, regardless
@@ -1242,7 +1531,6 @@ static int ov8xx0_configure(struct sd *sd)
 	}
 
 	/* Set sensor-specific vars */
-/*	sd->sif = 0;		already done */
 	return 0;
 }
 
@@ -1279,15 +1567,13 @@ static int ov7xx0_configure(struct sd *sd)
 		}
 	} else if ((rc & 3) == 1) {
 		/* I don't know what's different about the 76BE yet. */
-		if (i2c_r(sd, 0x15) & 1)
+		if (i2c_r(sd, 0x15) & 1) {
 			PDEBUG(D_PROBE, "Sensor is an OV7620AE");
-		else
+			sd->sensor = SEN_OV7620;
+		} else {
 			PDEBUG(D_PROBE, "Sensor is an OV76BE");
-
-		/* OV511+ will return all zero isoc data unless we
-		 * configure the sensor as a 7620. Someone needs to
-		 * find the exact reg. setting that causes this. */
-		sd->sensor = SEN_OV76BE;
+			sd->sensor = SEN_OV76BE;
+		}
 	} else if ((rc & 3) == 0) {
 		/* try to read product id registers */
 		high = i2c_r(sd, 0x0a);
@@ -1333,7 +1619,6 @@ static int ov7xx0_configure(struct sd *sd)
 	}
 
 	/* Set sensor-specific vars */
-/*	sd->sif = 0;		already done */
 	return 0;
 }
 
@@ -1362,13 +1647,14 @@ static int ov6xx0_configure(struct sd *sd)
 		break;
 	case 0x01:
 		sd->sensor = SEN_OV6620;
+		PDEBUG(D_PROBE, "Sensor is an OV6620");
 		break;
 	case 0x02:
 		sd->sensor = SEN_OV6630;
 		PDEBUG(D_PROBE, "Sensor is an OV66308AE");
 		break;
 	case 0x03:
-		sd->sensor = SEN_OV6630;
+		sd->sensor = SEN_OV66308AF;
 		PDEBUG(D_PROBE, "Sensor is an OV66308AF");
 		break;
 	case 0x90:
@@ -1391,6 +1677,9 @@ static int ov6xx0_configure(struct sd *sd)
 /* Turns on or off the LED. Only has an effect with OV511+/OV518(+)/OV519 */
 static void ov51x_led_control(struct sd *sd, int on)
 {
+	if (sd->invert_led)
+		on = !on;
+
 	switch (sd->bridge) {
 	/* OV511 has no LED control */
 	case BRIDGE_OV511PLUS:
@@ -1406,9 +1695,31 @@ static void ov51x_led_control(struct sd *sd, int on)
 	}
 }
 
-/* OV518 quantization tables are 8x4 (instead of 8x8) */
-static int ov518_upload_quan_tables(struct sd *sd)
+static int ov51x_upload_quan_tables(struct sd *sd)
 {
+	const unsigned char yQuanTable511[] = {
+		0, 1, 1, 2, 2, 3, 3, 4,
+		1, 1, 1, 2, 2, 3, 4, 4,
+		1, 1, 2, 2, 3, 4, 4, 4,
+		2, 2, 2, 3, 4, 4, 4, 4,
+		2, 2, 3, 4, 4, 5, 5, 5,
+		3, 3, 4, 4, 5, 5, 5, 5,
+		3, 4, 4, 4, 5, 5, 5, 5,
+		4, 4, 4, 4, 5, 5, 5, 5
+	};
+
+	const unsigned char uvQuanTable511[] = {
+		0, 2, 2, 3, 4, 4, 4, 4,
+		2, 2, 2, 4, 4, 4, 4, 4,
+		2, 2, 3, 4, 4, 4, 4, 4,
+		3, 4, 4, 4, 4, 4, 4, 4,
+		4, 4, 4, 4, 4, 4, 4, 4,
+		4, 4, 4, 4, 4, 4, 4, 4,
+		4, 4, 4, 4, 4, 4, 4, 4,
+		4, 4, 4, 4, 4, 4, 4, 4
+	};
+
+	/* OV518 quantization tables are 8x4 (instead of 8x8) */
 	const unsigned char yQuanTable518[] = {
 		5, 4, 5, 6, 6, 7, 7, 7,
 		5, 5, 5, 5, 6, 7, 7, 7,
@@ -1423,14 +1734,23 @@ static int ov518_upload_quan_tables(struct sd *sd)
 		7, 7, 7, 7, 7, 7, 8, 8
 	};
 
-	const unsigned char *pYTable = yQuanTable518;
-	const unsigned char *pUVTable = uvQuanTable518;
+	const unsigned char *pYTable, *pUVTable;
 	unsigned char val0, val1;
-	int i, rc, reg = R51x_COMP_LUT_BEGIN;
+	int i, size, rc, reg = R51x_COMP_LUT_BEGIN;
 
 	PDEBUG(D_PROBE, "Uploading quantization tables");
 
-	for (i = 0; i < 16; i++) {
+	if (sd->bridge == BRIDGE_OV511 || sd->bridge == BRIDGE_OV511PLUS) {
+		pYTable = yQuanTable511;
+		pUVTable = uvQuanTable511;
+		size  = 32;
+	} else {
+		pYTable = yQuanTable518;
+		pUVTable = uvQuanTable518;
+		size  = 16;
+	}
+
+	for (i = 0; i < size; i++) {
 		val0 = *pYTable++;
 		val1 = *pYTable++;
 		val0 &= 0x0f;
@@ -1445,7 +1765,7 @@ static int ov518_upload_quan_tables(struct sd *sd)
 		val0 &= 0x0f;
 		val1 &= 0x0f;
 		val0 |= val1 << 4;
-		rc = reg_w(sd, reg + 16, val0);
+		rc = reg_w(sd, reg + size, val0);
 		if (rc < 0)
 			return rc;
 
@@ -1455,6 +1775,87 @@ static int ov518_upload_quan_tables(struct sd *sd)
 	return 0;
 }
 
+/* This initializes the OV511/OV511+ and the sensor */
+static int ov511_configure(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int rc;
+
+	/* For 511 and 511+ */
+	const struct ov_regvals init_511[] = {
+		{ R51x_SYS_RESET,	0x7f },
+		{ R51x_SYS_INIT,	0x01 },
+		{ R51x_SYS_RESET,	0x7f },
+		{ R51x_SYS_INIT,	0x01 },
+		{ R51x_SYS_RESET,	0x3f },
+		{ R51x_SYS_INIT,	0x01 },
+		{ R51x_SYS_RESET,	0x3d },
+	};
+
+	const struct ov_regvals norm_511[] = {
+		{ R511_DRAM_FLOW_CTL, 	0x01 },
+		{ R51x_SYS_SNAP,	0x00 },
+		{ R51x_SYS_SNAP,	0x02 },
+		{ R51x_SYS_SNAP,	0x00 },
+		{ R511_FIFO_OPTS,	0x1f },
+		{ R511_COMP_EN,		0x00 },
+		{ R511_COMP_LUT_EN,	0x03 },
+	};
+
+	const struct ov_regvals norm_511_p[] = {
+		{ R511_DRAM_FLOW_CTL,	0xff },
+		{ R51x_SYS_SNAP,	0x00 },
+		{ R51x_SYS_SNAP,	0x02 },
+		{ R51x_SYS_SNAP,	0x00 },
+		{ R511_FIFO_OPTS,	0xff },
+		{ R511_COMP_EN,		0x00 },
+		{ R511_COMP_LUT_EN,	0x03 },
+	};
+
+	const struct ov_regvals compress_511[] = {
+		{ 0x70, 0x1f },
+		{ 0x71, 0x05 },
+		{ 0x72, 0x06 },
+		{ 0x73, 0x06 },
+		{ 0x74, 0x14 },
+		{ 0x75, 0x03 },
+		{ 0x76, 0x04 },
+		{ 0x77, 0x04 },
+	};
+
+	PDEBUG(D_PROBE, "Device custom id %x", reg_r(sd, R51x_SYS_CUST_ID));
+
+	rc = write_regvals(sd, init_511, ARRAY_SIZE(init_511));
+	if (rc < 0)
+		return rc;
+
+	switch (sd->bridge) {
+	case BRIDGE_OV511:
+		rc = write_regvals(sd, norm_511, ARRAY_SIZE(norm_511));
+		if (rc < 0)
+			return rc;
+		break;
+	case BRIDGE_OV511PLUS:
+		rc = write_regvals(sd, norm_511_p, ARRAY_SIZE(norm_511_p));
+		if (rc < 0)
+			return rc;
+		break;
+	}
+
+	/* Init compression */
+	rc = write_regvals(sd, compress_511, ARRAY_SIZE(compress_511));
+	if (rc < 0)
+		return rc;
+
+	rc = ov51x_upload_quan_tables(sd);
+	if (rc < 0) {
+		PDEBUG(D_ERR, "Error uploading quantization tables");
+		return rc;
+	}
+
+	return 0;
+}
+
 /* This initializes the OV518/OV518+ and the sensor */
 static int ov518_configure(struct gspca_dev *gspca_dev)
 {
@@ -1462,7 +1863,7 @@ static int ov518_configure(struct gspca_dev *gspca_dev)
 	int rc;
 
 	/* For 518 and 518+ */
-	static struct ov_regvals init_518[] = {
+	const struct ov_regvals init_518[] = {
 		{ R51x_SYS_RESET,	0x40 },
 		{ R51x_SYS_INIT,	0xe1 },
 		{ R51x_SYS_RESET,	0x3e },
@@ -1473,7 +1874,7 @@ static int ov518_configure(struct gspca_dev *gspca_dev)
 		{ 0x5d,			0x03 },
 	};
 
-	static struct ov_regvals norm_518[] = {
+	const struct ov_regvals norm_518[] = {
 		{ R51x_SYS_SNAP,	0x02 }, /* Reset */
 		{ R51x_SYS_SNAP,	0x01 }, /* Enable */
 		{ 0x31, 		0x0f },
@@ -1486,7 +1887,7 @@ static int ov518_configure(struct gspca_dev *gspca_dev)
 		{ 0x2f,			0x80 },
 	};
 
-	static struct ov_regvals norm_518_p[] = {
+	const struct ov_regvals norm_518_p[] = {
 		{ R51x_SYS_SNAP,	0x02 }, /* Reset */
 		{ R51x_SYS_SNAP,	0x01 }, /* Enable */
 		{ 0x31, 		0x0f },
@@ -1531,7 +1932,7 @@ static int ov518_configure(struct gspca_dev *gspca_dev)
 		break;
 	}
 
-	rc = ov518_upload_quan_tables(sd);
+	rc = ov51x_upload_quan_tables(sd);
 	if (rc < 0) {
 		PDEBUG(D_ERR, "Error uploading quantization tables");
 		return rc;
@@ -1573,9 +1974,14 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	struct cam *cam;
 	int ret = 0;
 
-	sd->bridge = id->driver_info;
+	sd->bridge = id->driver_info & BRIDGE_MASK;
+	sd->invert_led = id->driver_info & BRIDGE_INVERT_LED;
 
 	switch (sd->bridge) {
+	case BRIDGE_OV511:
+	case BRIDGE_OV511PLUS:
+		ret = ov511_configure(gspca_dev);
+		break;
 	case BRIDGE_OV518:
 	case BRIDGE_OV518PLUS:
 		ret = ov518_configure(gspca_dev);
@@ -1634,6 +2040,16 @@ static int sd_config(struct gspca_dev *gspca_dev,
 
 	cam = &gspca_dev->cam;
 	switch (sd->bridge) {
+	case BRIDGE_OV511:
+	case BRIDGE_OV511PLUS:
+		if (!sd->sif) {
+			cam->cam_mode = ov511_vga_mode;
+			cam->nmodes = ARRAY_SIZE(ov511_vga_mode);
+		} else {
+			cam->cam_mode = ov511_sif_mode;
+			cam->nmodes = ARRAY_SIZE(ov511_sif_mode);
+		}
+		break;
 	case BRIDGE_OV518:
 	case BRIDGE_OV518PLUS:
 		if (!sd->sif) {
@@ -1655,13 +2071,28 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		break;
 	}
 	sd->brightness = BRIGHTNESS_DEF;
-	sd->contrast = CONTRAST_DEF;
+	if (sd->sensor == SEN_OV6630 || sd->sensor == SEN_OV66308AF)
+		sd->contrast = 200; /* The default is too low for the ov6630 */
+	else
+		sd->contrast = CONTRAST_DEF;
 	sd->colors = COLOR_DEF;
 	sd->hflip = HFLIP_DEF;
 	sd->vflip = VFLIP_DEF;
-	if (sd->sensor != SEN_OV7670)
-		gspca_dev->ctrl_dis = (1 << HFLIP_IDX)
-					| (1 << VFLIP_IDX);
+	sd->autobrightness = AUTOBRIGHT_DEF;
+	if (sd->sensor == SEN_OV7670) {
+		sd->freq = OV7670_FREQ_DEF;
+		gspca_dev->ctrl_dis = 1 << FREQ_IDX;
+	} else {
+		sd->freq = FREQ_DEF;
+		gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX) |
+				      (1 << OV7670_FREQ_IDX);
+	}
+	if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7670)
+		gspca_dev->ctrl_dis |= 1 << AUTOBRIGHT_IDX;
+	/* OV8610 Frequency filter control should work but needs testing */
+	if (sd->sensor == SEN_OV8610)
+		gspca_dev->ctrl_dis |= 1 << FREQ_IDX;
+
 	return 0;
 error:
 	PDEBUG(D_ERR, "OV519 Config failed");
@@ -1680,6 +2111,7 @@ static int sd_init(struct gspca_dev *gspca_dev)
 			return -EIO;
 		break;
 	case SEN_OV6630:
+	case SEN_OV66308AF:
 		if (write_i2c_regvals(sd, norm_6x30, ARRAY_SIZE(norm_6x30)))
 			return -EIO;
 		break;
@@ -1688,6 +2120,8 @@ static int sd_init(struct gspca_dev *gspca_dev)
 /*	case SEN_OV76BE: */
 		if (write_i2c_regvals(sd, norm_7610, ARRAY_SIZE(norm_7610)))
 			return -EIO;
+		if (i2c_w_mask(sd, 0x0e, 0x00, 0x40))
+			return -EIO;
 		break;
 	case SEN_OV7620:
 		if (write_i2c_regvals(sd, norm_7620, ARRAY_SIZE(norm_7620)))
@@ -1709,6 +2143,126 @@ static int sd_init(struct gspca_dev *gspca_dev)
 	return 0;
 }
 
+/* Set up the OV511/OV511+ with the given image parameters.
+ *
+ * Do not put any sensor-specific code in here (including I2C I/O functions)
+ */
+static int ov511_mode_init_regs(struct sd *sd)
+{
+	int hsegs, vsegs, packet_size, fps, needed;
+	int interlaced = 0;
+	struct usb_host_interface *alt;
+	struct usb_interface *intf;
+
+	intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface);
+	alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
+	if (!alt) {
+		PDEBUG(D_ERR, "Couldn't get altsetting");
+		return -EIO;
+	}
+
+	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
+	reg_w(sd, R51x_FIFO_PSIZE, packet_size >> 5);
+
+	reg_w(sd, R511_CAM_UV_EN, 0x01);
+	reg_w(sd, R511_SNAP_UV_EN, 0x01);
+	reg_w(sd, R511_SNAP_OPTS, 0x03);
+
+	/* Here I'm assuming that snapshot size == image size.
+	 * I hope that's always true. --claudio
+	 */
+	hsegs = (sd->gspca_dev.width >> 3) - 1;
+	vsegs = (sd->gspca_dev.height >> 3) - 1;
+
+	reg_w(sd, R511_CAM_PXCNT, hsegs);
+	reg_w(sd, R511_CAM_LNCNT, vsegs);
+	reg_w(sd, R511_CAM_PXDIV, 0x00);
+	reg_w(sd, R511_CAM_LNDIV, 0x00);
+
+	/* YUV420, low pass filter on */
+	reg_w(sd, R511_CAM_OPTS, 0x03);
+
+	/* Snapshot additions */
+	reg_w(sd, R511_SNAP_PXCNT, hsegs);
+	reg_w(sd, R511_SNAP_LNCNT, vsegs);
+	reg_w(sd, R511_SNAP_PXDIV, 0x00);
+	reg_w(sd, R511_SNAP_LNDIV, 0x00);
+
+	/******** Set the framerate ********/
+	if (frame_rate > 0)
+		sd->frame_rate = frame_rate;
+
+	switch (sd->sensor) {
+	case SEN_OV6620:
+		/* No framerate control, doesn't like higher rates yet */
+		sd->clockdiv = 3;
+		break;
+
+	/* Note once the FIXME's in mode_init_ov_sensor_regs() are fixed
+	   for more sensors we need to do this for them too */
+	case SEN_OV7620:
+	case SEN_OV7640:
+	case SEN_OV76BE:
+		if (sd->gspca_dev.width == 320)
+			interlaced = 1;
+		/* Fall through */
+	case SEN_OV6630:
+	case SEN_OV7610:
+	case SEN_OV7670:
+		switch (sd->frame_rate) {
+		case 30:
+		case 25:
+			/* Not enough bandwidth to do 640x480 @ 30 fps */
+			if (sd->gspca_dev.width != 640) {
+				sd->clockdiv = 0;
+				break;
+			}
+			/* Fall through for 640x480 case */
+		default:
+/*		case 20: */
+/*		case 15: */
+			sd->clockdiv = 1;
+			break;
+		case 10:
+			sd->clockdiv = 2;
+			break;
+		case 5:
+			sd->clockdiv = 5;
+			break;
+		}
+		if (interlaced) {
+			sd->clockdiv = (sd->clockdiv + 1) * 2 - 1;
+			/* Higher then 10 does not work */
+			if (sd->clockdiv > 10)
+				sd->clockdiv = 10;
+		}
+		break;
+
+	case SEN_OV8610:
+		/* No framerate control ?? */
+		sd->clockdiv = 0;
+		break;
+	}
+
+	/* Check if we have enough bandwidth to disable compression */
+	fps = (interlaced ? 60 : 30) / (sd->clockdiv + 1) + 1;
+	needed = fps * sd->gspca_dev.width * sd->gspca_dev.height * 3 / 2;
+	/* 1400 is a conservative estimate of the max nr of isoc packets/sec */
+	if (needed > 1400 * packet_size) {
+		/* Enable Y and UV quantization and compression */
+		reg_w(sd, R511_COMP_EN, 0x07);
+		reg_w(sd, R511_COMP_LUT_EN, 0x03);
+	} else {
+		reg_w(sd, R511_COMP_EN, 0x06);
+		reg_w(sd, R511_COMP_LUT_EN, 0x00);
+	}
+
+	reg_w(sd, R51x_SYS_RESET, OV511_RESET_OMNICE);
+	reg_w(sd, R51x_SYS_RESET, 0);
+
+	return 0;
+}
+
 /* Sets up the OV518/OV518+ with the given image parameters
  *
  * OV518 needs a completely different approach, until we can figure out what
@@ -1718,7 +2272,19 @@ static int sd_init(struct gspca_dev *gspca_dev)
  */
 static int ov518_mode_init_regs(struct sd *sd)
 {
-	int hsegs, vsegs;
+	int hsegs, vsegs, packet_size;
+	struct usb_host_interface *alt;
+	struct usb_interface *intf;
+
+	intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface);
+	alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
+	if (!alt) {
+		PDEBUG(D_ERR, "Couldn't get altsetting");
+		return -EIO;
+	}
+
+	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
+	ov518_reg_w32(sd, R51x_FIFO_PSIZE, packet_size & ~7, 2);
 
 	/******** Set the mode ********/
 
@@ -1755,20 +2321,30 @@ static int ov518_mode_init_regs(struct sd *sd)
 	/* Windows driver does this here; who knows why */
 	reg_w(sd, 0x2f, 0x80);
 
-	/******** Set the framerate (to 30 FPS) ********/
-	if (sd->bridge == BRIDGE_OV518PLUS)
-		sd->clockdiv = 1;
-	else
-		sd->clockdiv = 0;
+	/******** Set the framerate  ********/
+	sd->clockdiv = 1;
 
 	/* Mode independent, but framerate dependent, regs */
-	reg_w(sd, 0x51, 0x04);	/* Clock divider; lower==faster */
+	/* 0x51: Clock divider; Only works on some cams which use 2 crystals */
+	reg_w(sd, 0x51, 0x04);
 	reg_w(sd, 0x22, 0x18);
 	reg_w(sd, 0x23, 0xff);
 
-	if (sd->bridge == BRIDGE_OV518PLUS)
-		reg_w(sd, 0x21, 0x19);
-	else
+	if (sd->bridge == BRIDGE_OV518PLUS) {
+		switch (sd->sensor) {
+		case SEN_OV7620:
+			if (sd->gspca_dev.width == 320) {
+				reg_w(sd, 0x20, 0x00);
+				reg_w(sd, 0x21, 0x19);
+			} else {
+				reg_w(sd, 0x20, 0x60);
+				reg_w(sd, 0x21, 0x1f);
+			}
+			break;
+		default:
+			reg_w(sd, 0x21, 0x19);
+		}
+	} else
 		reg_w(sd, 0x71, 0x17);	/* Compression-related? */
 
 	/* FIXME: Sensor-specific */
@@ -1879,7 +2455,11 @@ static int ov519_mode_init_regs(struct sd *sd)
 
 	reg_w(sd, OV519_R10_H_SIZE,	sd->gspca_dev.width >> 4);
 	reg_w(sd, OV519_R11_V_SIZE,	sd->gspca_dev.height >> 3);
-	reg_w(sd, OV519_R12_X_OFFSETL,	0x00);
+	if (sd->sensor == SEN_OV7670 &&
+	    sd->gspca_dev.cam.cam_mode[sd->gspca_dev.curr_mode].priv)
+		reg_w(sd, OV519_R12_X_OFFSETL, 0x04);
+	else
+		reg_w(sd, OV519_R12_X_OFFSETL, 0x00);
 	reg_w(sd, OV519_R13_X_OFFSETH,	0x00);
 	reg_w(sd, OV519_R14_Y_OFFSETL,	0x00);
 	reg_w(sd, OV519_R15_Y_OFFSETH,	0x00);
@@ -1971,7 +2551,7 @@ static int mode_init_ov_sensor_regs(struct sd *sd)
 	int qvga;
 
 	gspca_dev = &sd->gspca_dev;
-	qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
+	qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 1;
 
 	/******** Mode (VGA/QVGA) and sensor specific regs ********/
 	switch (sd->sensor) {
@@ -1983,21 +2563,16 @@ static int mode_init_ov_sensor_regs(struct sd *sd)
 		i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
 		break;
 	case SEN_OV7620:
-/*		i2c_w(sd, 0x2b, 0x00); */
+	case SEN_OV76BE:
 		i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
 		i2c_w_mask(sd, 0x28, qvga ? 0x00 : 0x20, 0x20);
 		i2c_w(sd, 0x24, qvga ? 0x20 : 0x3a);
 		i2c_w(sd, 0x25, qvga ? 0x30 : 0x60);
 		i2c_w_mask(sd, 0x2d, qvga ? 0x40 : 0x00, 0x40);
-		i2c_w_mask(sd, 0x67, qvga ? 0xf0 : 0x90, 0xf0);
+		i2c_w_mask(sd, 0x67, qvga ? 0xb0 : 0x90, 0xf0);
 		i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20);
 		break;
-	case SEN_OV76BE:
-/*		i2c_w(sd, 0x2b, 0x00); */
-		i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
-		break;
 	case SEN_OV7640:
-/*		i2c_w(sd, 0x2b, 0x00); */
 		i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
 		i2c_w_mask(sd, 0x28, qvga ? 0x00 : 0x20, 0x20);
 /*		i2c_w(sd, 0x24, qvga ? 0x20 : 0x3a); */
@@ -2016,6 +2591,7 @@ static int mode_init_ov_sensor_regs(struct sd *sd)
 		break;
 	case SEN_OV6620:
 	case SEN_OV6630:
+	case SEN_OV66308AF:
 		i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
 		break;
 	default:
@@ -2023,10 +2599,6 @@ static int mode_init_ov_sensor_regs(struct sd *sd)
 	}
 
 	/******** Palette-specific regs ********/
-	if (sd->sensor == SEN_OV7610 || sd->sensor == SEN_OV76BE) {
-		/* not valid on the OV6620/OV7620/6630? */
-		i2c_w_mask(sd, 0x0e, 0x00, 0x40);
-	}
 
 	/* The OV518 needs special treatment. Although both the OV518
 	 * and the OV6630 support a 16-bit video bus, only the 8 bit Y
@@ -2036,25 +2608,12 @@ static int mode_init_ov_sensor_regs(struct sd *sd)
 
 	/* OV7640 is 8-bit only */
 
-	if (sd->sensor != SEN_OV6630 && sd->sensor != SEN_OV7640)
+	if (sd->sensor != SEN_OV6630 && sd->sensor != SEN_OV66308AF &&
+					sd->sensor != SEN_OV7640)
 		i2c_w_mask(sd, 0x13, 0x00, 0x20);
 
 	/******** Clock programming ********/
-	/* The OV6620 needs special handling. This prevents the
-	 * severe banding that normally occurs */
-	if (sd->sensor == SEN_OV6620) {
-
-		/* Clock down */
-		i2c_w(sd, 0x2a, 0x04);
-		i2c_w(sd, 0x11, sd->clockdiv);
-		i2c_w(sd, 0x2a, 0x84);
-		/* This next setting is critical. It seems to improve
-		 * the gain or the contrast. The "reserved" bits seem
-		 * to have some effect in this case. */
-		i2c_w(sd, 0x2d, 0x85);
-	} else {
-		i2c_w(sd, 0x11, sd->clockdiv);
-	}
+	i2c_w(sd, 0x11, sd->clockdiv);
 
 	/******** Special Features ********/
 /* no evidence this is possible with OV7670, either */
@@ -2098,13 +2657,14 @@ static void sethvflip(struct sd *sd)
 static int set_ov_sensor_window(struct sd *sd)
 {
 	struct gspca_dev *gspca_dev;
-	int qvga;
+	int qvga, crop;
 	int hwsbase, hwebase, vwsbase, vwebase, hwscale, vwscale;
 	int ret, hstart, hstop, vstop, vstart;
 	__u8 v;
 
 	gspca_dev = &sd->gspca_dev;
-	qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
+	qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 1;
+	crop = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 2;
 
 	/* The different sensor ICs handle setting up of window differently.
 	 * IF YOU SET IT WRONG, YOU WILL GET ALL ZERO ISOC DATA FROM OV51x!! */
@@ -2123,14 +2683,19 @@ static int set_ov_sensor_window(struct sd *sd)
 		break;
 	case SEN_OV6620:
 	case SEN_OV6630:
+	case SEN_OV66308AF:
 		hwsbase = 0x38;
 		hwebase = 0x3a;
 		vwsbase = 0x05;
 		vwebase = 0x06;
-		if (qvga) {
+		if (sd->sensor == SEN_OV66308AF && qvga)
 			/* HDG: this fixes U and V getting swapped */
-			hwsbase--;
-			vwsbase--;
+			hwsbase++;
+		if (crop) {
+			hwsbase += 8;
+			hwebase += 8;
+			vwsbase += 11;
+			vwebase += 11;
 		}
 		break;
 	case SEN_OV7620:
@@ -2155,6 +2720,7 @@ static int set_ov_sensor_window(struct sd *sd)
 	switch (sd->sensor) {
 	case SEN_OV6620:
 	case SEN_OV6630:
+	case SEN_OV66308AF:
 		if (qvga) {		/* QCIF */
 			hwscale = 0;
 			vwscale = 0;
@@ -2207,7 +2773,7 @@ static int set_ov_sensor_window(struct sd *sd)
 		if (qvga) {		/* QVGA from ov7670.c by
 					 * Jonathan Corbet */
 			hstart = 164;
-			hstop = 20;
+			hstop = 28;
 			vstart = 14;
 			vstop = 494;
 		} else {		/* VGA */
@@ -2233,7 +2799,6 @@ static int set_ov_sensor_window(struct sd *sd)
 		msleep(10);	/* need to sleep between read and write to
 				 * same reg! */
 		i2c_w(sd, OV7670_REG_VREF, v);
-		sethvflip(sd);
 	} else {
 		i2c_w(sd, 0x17, hwsbase);
 		i2c_w(sd, 0x18, hwebase + (sd->gspca_dev.width >> hwscale));
@@ -2250,6 +2815,10 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	int ret = 0;
 
 	switch (sd->bridge) {
+	case BRIDGE_OV511:
+	case BRIDGE_OV511PLUS:
+		ret = ov511_mode_init_regs(sd);
+		break;
 	case BRIDGE_OV518:
 	case BRIDGE_OV518PLUS:
 		ret = ov518_mode_init_regs(sd);
@@ -2268,6 +2837,9 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	setcontrast(gspca_dev);
 	setbrightness(gspca_dev);
 	setcolors(gspca_dev);
+	sethvflip(sd);
+	setautobrightness(sd);
+	setfreq(sd);
 
 	ret = ov51x_restart(sd);
 	if (ret < 0)
@@ -2287,23 +2859,88 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	ov51x_led_control(sd, 0);
 }
 
-static void ov518_pkt_scan(struct gspca_dev *gspca_dev,
+static void ov511_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
-			__u8 *data,			/* isoc packet */
+			__u8 *in,			/* isoc packet */
 			int len)			/* iso packet length */
 {
-	PDEBUG(D_STREAM, "ov518_pkt_scan: %d bytes", len);
+	struct sd *sd = (struct sd *) gspca_dev;
 
-	if (len & 7) {
-		len--;
-		PDEBUG(D_STREAM, "packet number: %d\n", (int)data[len]);
+	/* SOF/EOF packets have 1st to 8th bytes zeroed and the 9th
+	 * byte non-zero. The EOF packet has image width/height in the
+	 * 10th and 11th bytes. The 9th byte is given as follows:
+	 *
+	 * bit 7: EOF
+	 *     6: compression enabled
+	 *     5: 422/420/400 modes
+	 *     4: 422/420/400 modes
+	 *     3: 1
+	 *     2: snapshot button on
+	 *     1: snapshot frame
+	 *     0: even/odd field
+	 */
+	if (!(in[0] | in[1] | in[2] | in[3] | in[4] | in[5] | in[6] | in[7]) &&
+	    (in[8] & 0x08)) {
+		if (in[8] & 0x80) {
+			/* Frame end */
+			if ((in[9] + 1) * 8 != gspca_dev->width ||
+			    (in[10] + 1) * 8 != gspca_dev->height) {
+				PDEBUG(D_ERR, "Invalid frame size, got: %dx%d,"
+					" requested: %dx%d\n",
+					(in[9] + 1) * 8, (in[10] + 1) * 8,
+					gspca_dev->width, gspca_dev->height);
+				gspca_dev->last_packet_type = DISCARD_PACKET;
+				return;
+			}
+			/* Add 11 byte footer to frame, might be usefull */
+			gspca_frame_add(gspca_dev, LAST_PACKET, frame, in, 11);
+			return;
+		} else {
+			/* Frame start */
+			gspca_frame_add(gspca_dev, FIRST_PACKET, frame, in, 0);
+			sd->packet_nr = 0;
+		}
 	}
 
+	/* Ignore the packet number */
+	len--;
+
+	/* intermediate packet */
+	gspca_frame_add(gspca_dev, INTER_PACKET, frame, in, len);
+}
+
+static void ov518_pkt_scan(struct gspca_dev *gspca_dev,
+			struct gspca_frame *frame,	/* target */
+			__u8 *data,			/* isoc packet */
+			int len)			/* iso packet length */
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
 	/* A false positive here is likely, until OVT gives me
 	 * the definitive SOF/EOF format */
 	if ((!(data[0] | data[1] | data[2] | data[3] | data[5])) && data[6]) {
 		gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0);
 		gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, 0);
+		sd->packet_nr = 0;
+	}
+
+	if (gspca_dev->last_packet_type == DISCARD_PACKET)
+		return;
+
+	/* Does this device use packet numbers ? */
+	if (len & 7) {
+		len--;
+		if (sd->packet_nr == data[len])
+			sd->packet_nr++;
+		/* The last few packets of the frame (which are all 0's
+		   except that they may contain part of the footer), are
+		   numbered 0 */
+		else if (sd->packet_nr == 0 || data[len]) {
+			PDEBUG(D_ERR, "Invalid packet nr: %d (expect: %d)",
+				(int)data[len], (int)sd->packet_nr);
+			gspca_dev->last_packet_type = DISCARD_PACKET;
+			return;
+		}
 	}
 
 	/* intermediate packet */
@@ -2364,6 +3001,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	switch (sd->bridge) {
 	case BRIDGE_OV511:
 	case BRIDGE_OV511PLUS:
+		ov511_pkt_scan(gspca_dev, frame, data, len);
 		break;
 	case BRIDGE_OV518:
 	case BRIDGE_OV518PLUS:
@@ -2389,13 +3027,13 @@ static void setbrightness(struct gspca_dev *gspca_dev)
 	case SEN_OV76BE:
 	case SEN_OV6620:
 	case SEN_OV6630:
+	case SEN_OV66308AF:
 	case SEN_OV7640:
 		i2c_w(sd, OV7610_REG_BRT, val);
 		break;
 	case SEN_OV7620:
 		/* 7620 doesn't like manual changes when in auto mode */
-/*fixme
- *		if (!sd->auto_brt) */
+		if (!sd->autobrightness)
 			i2c_w(sd, OV7610_REG_BRT, val);
 		break;
 	case SEN_OV7670:
@@ -2418,6 +3056,7 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 		i2c_w(sd, OV7610_REG_CNT, val);
 		break;
 	case SEN_OV6630:
+	case SEN_OV66308AF:
 		i2c_w_mask(sd, OV7610_REG_CNT, val >> 4, 0x0f);
 		break;
 	case SEN_OV8610: {
@@ -2462,6 +3101,7 @@ static void setcolors(struct gspca_dev *gspca_dev)
 	case SEN_OV76BE:
 	case SEN_OV6620:
 	case SEN_OV6630:
+	case SEN_OV66308AF:
 		i2c_w(sd, OV7610_REG_SAT, val);
 		break;
 	case SEN_OV7620:
@@ -2482,6 +3122,72 @@ static void setcolors(struct gspca_dev *gspca_dev)
 	}
 }
 
+static void setautobrightness(struct sd *sd)
+{
+	if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7670)
+		return;
+
+	i2c_w_mask(sd, 0x2d, sd->autobrightness ? 0x10 : 0x00, 0x10);
+}
+
+static void setfreq(struct sd *sd)
+{
+	if (sd->sensor == SEN_OV7670) {
+		switch (sd->freq) {
+		case 0: /* Banding filter disabled */
+			i2c_w_mask(sd, OV7670_REG_COM8, 0, OV7670_COM8_BFILT);
+			break;
+		case 1: /* 50 hz */
+			i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_BFILT,
+				   OV7670_COM8_BFILT);
+			i2c_w_mask(sd, OV7670_REG_COM11, 0x08, 0x18);
+			break;
+		case 2: /* 60 hz */
+			i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_BFILT,
+				   OV7670_COM8_BFILT);
+			i2c_w_mask(sd, OV7670_REG_COM11, 0x00, 0x18);
+			break;
+		case 3: /* Auto hz */
+			i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_BFILT,
+				   OV7670_COM8_BFILT);
+			i2c_w_mask(sd, OV7670_REG_COM11, OV7670_COM11_HZAUTO,
+				   0x18);
+			break;
+		}
+	} else {
+		switch (sd->freq) {
+		case 0: /* Banding filter disabled */
+			i2c_w_mask(sd, 0x2d, 0x00, 0x04);
+			i2c_w_mask(sd, 0x2a, 0x00, 0x80);
+			break;
+		case 1: /* 50 hz (filter on and framerate adj) */
+			i2c_w_mask(sd, 0x2d, 0x04, 0x04);
+			i2c_w_mask(sd, 0x2a, 0x80, 0x80);
+			/* 20 fps -> 16.667 fps */
+			if (sd->sensor == SEN_OV6620 ||
+			    sd->sensor == SEN_OV6630 ||
+			    sd->sensor == SEN_OV66308AF)
+				i2c_w(sd, 0x2b, 0x5e);
+			else
+				i2c_w(sd, 0x2b, 0xac);
+			break;
+		case 2: /* 60 hz (filter on, ...) */
+			i2c_w_mask(sd, 0x2d, 0x04, 0x04);
+			if (sd->sensor == SEN_OV6620 ||
+			    sd->sensor == SEN_OV6630 ||
+			    sd->sensor == SEN_OV66308AF) {
+				/* 20 fps -> 15 fps */
+				i2c_w_mask(sd, 0x2a, 0x80, 0x80);
+				i2c_w(sd, 0x2b, 0xa8);
+			} else {
+				/* no framerate adj. */
+				i2c_w_mask(sd, 0x2a, 0x00, 0x80);
+			}
+			break;
+		}
+	}
+}
+
 static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -2572,6 +3278,71 @@ static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val)
 	return 0;
 }
 
+static int sd_setautobrightness(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->autobrightness = val;
+	if (gspca_dev->streaming)
+		setautobrightness(sd);
+	return 0;
+}
+
+static int sd_getautobrightness(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->autobrightness;
+	return 0;
+}
+
+static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->freq = val;
+	if (gspca_dev->streaming)
+		setfreq(sd);
+	return 0;
+}
+
+static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->freq;
+	return 0;
+}
+
+static int sd_querymenu(struct gspca_dev *gspca_dev,
+			struct v4l2_querymenu *menu)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	switch (menu->id) {
+	case V4L2_CID_POWER_LINE_FREQUENCY:
+		switch (menu->index) {
+		case 0:		/* V4L2_CID_POWER_LINE_FREQUENCY_DISABLED */
+			strcpy((char *) menu->name, "NoFliker");
+			return 0;
+		case 1:		/* V4L2_CID_POWER_LINE_FREQUENCY_50HZ */
+			strcpy((char *) menu->name, "50 Hz");
+			return 0;
+		case 2:		/* V4L2_CID_POWER_LINE_FREQUENCY_60HZ */
+			strcpy((char *) menu->name, "60 Hz");
+			return 0;
+		case 3:
+			if (sd->sensor != SEN_OV7670)
+				return -EINVAL;
+
+			strcpy((char *) menu->name, "Automatic");
+			return 0;
+		}
+		break;
+	}
+	return -EINVAL;
+}
+
 /* sub-driver description */
 static const struct sd_desc sd_desc = {
 	.name = MODULE_NAME,
@@ -2582,6 +3353,7 @@ static const struct sd_desc sd_desc = {
 	.start = sd_start,
 	.stopN = sd_stopN,
 	.pkt_scan = sd_pkt_scan,
+	.querymenu = sd_querymenu,
 };
 
 /* -- module initialisation -- */
@@ -2590,17 +3362,22 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x041e, 0x405f), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x041e, 0x4060), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x041e, 0x4061), .driver_info = BRIDGE_OV519 },
-	{USB_DEVICE(0x041e, 0x4064), .driver_info = BRIDGE_OV519 },
-	{USB_DEVICE(0x041e, 0x4068), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x041e, 0x4064),
+	 .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
+	{USB_DEVICE(0x041e, 0x4068),
+	 .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
 	{USB_DEVICE(0x045e, 0x028c), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x054c, 0x0154), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x054c, 0x0155), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x05a9, 0x0511), .driver_info = BRIDGE_OV511 },
 	{USB_DEVICE(0x05a9, 0x0518), .driver_info = BRIDGE_OV518 },
 	{USB_DEVICE(0x05a9, 0x0519), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x05a9, 0x0530), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x05a9, 0x4519), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x05a9, 0x8519), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x05a9, 0xa511), .driver_info = BRIDGE_OV511PLUS },
 	{USB_DEVICE(0x05a9, 0xa518), .driver_info = BRIDGE_OV518PLUS },
+	{USB_DEVICE(0x0813, 0x0002), .driver_info = BRIDGE_OV511PLUS },
 	{}
 };
 
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index dc6a6f11354..0d02f41fa7d 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -46,6 +46,7 @@ struct sd {
 	u8 gamma;
 	u8 vflip;			/* ov7630/ov7648 only */
 	u8 infrared;			/* mt9v111 only */
+	u8 freq;			/* ov76xx only */
 	u8 quality;			/* image quality */
 #define QUALITY_MIN 60
 #define QUALITY_MAX 95
@@ -96,8 +97,11 @@ static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val);
 static int sd_setinfrared(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getinfrared(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val);
 
 static struct ctrl sd_ctrls[] = {
+#define BRIGHTNESS_IDX 0
 	{
 	    {
 		.id      = V4L2_CID_BRIGHTNESS,
@@ -113,6 +117,7 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setbrightness,
 	    .get = sd_getbrightness,
 	},
+#define CONTRAST_IDX 1
 	{
 	    {
 		.id      = V4L2_CID_CONTRAST,
@@ -128,20 +133,22 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setcontrast,
 	    .get = sd_getcontrast,
 	},
+#define COLOR_IDX 2
 	{
 	    {
 		.id      = V4L2_CID_SATURATION,
 		.type    = V4L2_CTRL_TYPE_INTEGER,
-		.name    = "Color",
+		.name    = "Saturation",
 		.minimum = 0,
 		.maximum = 40,
 		.step    = 1,
-#define COLOR_DEF 32
+#define COLOR_DEF 25
 		.default_value = COLOR_DEF,
 	    },
 	    .set = sd_setcolors,
 	    .get = sd_getcolors,
 	},
+#define BLUE_BALANCE_IDX 3
 	{
 	    {
 		.id      = V4L2_CID_BLUE_BALANCE,
@@ -156,6 +163,7 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setblue_balance,
 	    .get = sd_getblue_balance,
 	},
+#define RED_BALANCE_IDX 4
 	{
 	    {
 		.id      = V4L2_CID_RED_BALANCE,
@@ -170,6 +178,7 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setred_balance,
 	    .get = sd_getred_balance,
 	},
+#define GAMMA_IDX 5
 	{
 	    {
 		.id      = V4L2_CID_GAMMA,
@@ -184,7 +193,7 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setgamma,
 	    .get = sd_getgamma,
 	},
-#define AUTOGAIN_IDX 5
+#define AUTOGAIN_IDX 6
 	{
 	    {
 		.id      = V4L2_CID_AUTOGAIN,
@@ -200,7 +209,7 @@ static struct ctrl sd_ctrls[] = {
 	    .get = sd_getautogain,
 	},
 /* ov7630/ov7648 only */
-#define VFLIP_IDX 6
+#define VFLIP_IDX 7
 	{
 	    {
 		.id      = V4L2_CID_VFLIP,
@@ -209,14 +218,14 @@ static struct ctrl sd_ctrls[] = {
 		.minimum = 0,
 		.maximum = 1,
 		.step    = 1,
-#define VFLIP_DEF 0			/* vflip def = 1 for ov7630 */
+#define VFLIP_DEF 0
 		.default_value = VFLIP_DEF,
 	    },
 	    .set = sd_setvflip,
 	    .get = sd_getvflip,
 	},
 /* mt9v111 only */
-#define INFRARED_IDX 7
+#define INFRARED_IDX 8
 	{
 	    {
 		.id      = V4L2_CID_INFRARED,
@@ -231,28 +240,44 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setinfrared,
 	    .get = sd_getinfrared,
 	},
+/* ov7630/ov7648/ov7660 only */
+#define FREQ_IDX 9
+	{
+	    {
+		.id	 = V4L2_CID_POWER_LINE_FREQUENCY,
+		.type    = V4L2_CTRL_TYPE_MENU,
+		.name    = "Light frequency filter",
+		.minimum = 0,
+		.maximum = 2,	/* 0: 0, 1: 50Hz, 2:60Hz */
+		.step    = 1,
+#define FREQ_DEF 2
+		.default_value = FREQ_DEF,
+	    },
+	    .set = sd_setfreq,
+	    .get = sd_getfreq,
+	},
 };
 
 /* table of the disabled controls */
 static __u32 ctrl_dis[] = {
-	(1 << INFRARED_IDX) | (1 << VFLIP_IDX),
+	(1 << INFRARED_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX),
 						/* SENSOR_HV7131R 0 */
-	(1 << INFRARED_IDX) | (1 << VFLIP_IDX),
+	(1 << INFRARED_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX),
 						/* SENSOR_MI0360 1 */
-	(1 << INFRARED_IDX) | (1 << VFLIP_IDX),
+	(1 << INFRARED_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX),
 						/* SENSOR_MO4000 2 */
-	(1 << VFLIP_IDX),
+	(1 << VFLIP_IDX) | (1 << FREQ_IDX),
 						/* SENSOR_MT9V111 3 */
-	(1 << INFRARED_IDX) | (1 << VFLIP_IDX),
+	(1 << INFRARED_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX),
 						/* SENSOR_OM6802 4 */
-	(1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX),
+	(1 << INFRARED_IDX),
 						/* SENSOR_OV7630 5 */
 	(1 << INFRARED_IDX),
 						/* SENSOR_OV7648 6 */
 	(1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX) | (1 << VFLIP_IDX),
 						/* SENSOR_OV7660 7 */
-	(1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX) | (1 << VFLIP_IDX),
-						/* SENSOR_SP80708 8 */
+	(1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX) | (1 << VFLIP_IDX) |
+			      (1 << FREQ_IDX),	/* SENSOR_SP80708 8 */
 };
 
 static const struct v4l2_pix_format vga_mode[] = {
@@ -268,7 +293,8 @@ static const struct v4l2_pix_format vga_mode[] = {
 		.priv = 1},
 	{640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 640,
-		.sizeimage = 640 * 480 * 3 / 8 + 590,
+		/* Note 3 / 8 is not large enough, not even 5 / 8 is ?! */
+		.sizeimage = 640 * 480 * 3 / 4 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 0},
 };
@@ -604,7 +630,9 @@ static const u8 ov7630_sensor_init[][8] = {
 /* win: i2c_r from 00 to 80 */
 	{0xd1, 0x21, 0x03, 0x80, 0x10, 0x20, 0x80, 0x10},
 	{0xb1, 0x21, 0x0c, 0x20, 0x20, 0x00, 0x00, 0x10},
-	{0xd1, 0x21, 0x11, 0x00, 0x48, 0xc0, 0x00, 0x10},
+/* HDG: 0x11 was 0x00 change to 0x01 for better exposure (15 fps instead of 30)
+	0x13 was 0xc0 change to 0xc3 for auto gain and exposure */
+	{0xd1, 0x21, 0x11, 0x01, 0x48, 0xc3, 0x00, 0x10},
 	{0xb1, 0x21, 0x15, 0x80, 0x03, 0x00, 0x00, 0x10},
 	{0xd1, 0x21, 0x17, 0x1b, 0xbd, 0x05, 0xf6, 0x10},
 	{0xa1, 0x21, 0x1b, 0x04, 0x00, 0x00, 0x00, 0x10},
@@ -638,9 +666,8 @@ static const u8 ov7630_sensor_init[][8] = {
 	{0xa1, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10},
 	{0xb1, 0x21, 0x01, 0x80, 0x80, 0x00, 0x00, 0x10},
 /* */
-	{0xa1, 0x21, 0x11, 0x00, 0x00, 0x00, 0x00, 0x10},
-	{0xa1, 0x21, 0x2a, 0x88, 0x00, 0x00, 0x00, 0x10},
-	{0xa1, 0x21, 0x2b, 0x34, 0x00, 0x00, 0x00, 0x10},
+/*	{0xa1, 0x21, 0x2a, 0x88, 0x00, 0x00, 0x00, 0x10}, * set by setfreq */
+/*	{0xa1, 0x21, 0x2b, 0x34, 0x00, 0x00, 0x00, 0x10}, * set by setfreq */
 /* */
 	{0xa1, 0x21, 0x10, 0x83, 0x00, 0x00, 0x00, 0x10},
 /*	{0xb1, 0x21, 0x01, 0x88, 0x70, 0x00, 0x00, 0x10}, */
@@ -673,7 +700,7 @@ static const u8 ov7648_sensor_init[][8] = {
 	{0xd1, 0x21, 0x21, 0x86, 0x00, 0xde, 0xa0, 0x10},
 /*	{0xd1, 0x21, 0x25, 0x80, 0x32, 0xfe, 0xa0, 0x10}, jfm done */
 /*	{0xd1, 0x21, 0x29, 0x00, 0x91, 0x00, 0x88, 0x10}, jfm done */
-	{0xb1, 0x21, 0x2d, 0x85, 0x00, 0x00, 0x00, 0x10},
+/*	{0xb1, 0x21, 0x2d, 0x85, 0x00, 0x00, 0x00, 0x10}, set by setfreq */
 /*...*/
 /*	{0xa1, 0x21, 0x12, 0x08, 0x00, 0x00, 0x00, 0x10}, jfm done */
 /*	{0xa1, 0x21, 0x75, 0x06, 0x00, 0x00, 0x00, 0x10},   * COMN
@@ -1294,11 +1321,9 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	sd->gamma = GAMMA_DEF;
 	sd->autogain = AUTOGAIN_DEF;
 	sd->ag_cnt = -1;
-	if (sd->sensor != SENSOR_OV7630)
-		sd->vflip = 0;
-	else
-		sd->vflip = 1;
+	sd->vflip = VFLIP_DEF;
 	sd->infrared = INFRARED_DEF;
+	sd->freq = FREQ_DEF;
 	sd->quality = QUALITY_DEF;
 	sd->jpegqual = 80;
 
@@ -1569,7 +1594,7 @@ static void setautogain(struct gspca_dev *gspca_dev)
 		else
 			comb = 0xa0;
 		if (sd->autogain)
-			comb |= 0x02;
+			comb |= 0x03;
 		i2c_w1(&sd->gspca_dev, 0x13, comb);
 		return;
 	    }
@@ -1585,12 +1610,15 @@ static void setvflip(struct sd *sd)
 {
 	u8 comn;
 
-	if (sd->sensor == SENSOR_OV7630)
+	if (sd->sensor == SENSOR_OV7630) {
 		comn = 0x02;
-	else
+		if (!sd->vflip)
+			comn |= 0x80;
+	} else {
 		comn = 0x06;
-	if (sd->vflip)
-		comn |= 0x80;
+		if (sd->vflip)
+			comn |= 0x80;
+	}
 	i2c_w1(&sd->gspca_dev, 0x75, comn);
 }
 
@@ -1602,6 +1630,58 @@ static void setinfrared(struct sd *sd)
 		sd->infrared ? 0x66 : 0x64);
 }
 
+static void setfreq(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	if (sd->sensor == SENSOR_OV7660) {
+		switch (sd->freq) {
+		case 0: /* Banding filter disabled */
+			i2c_w1(gspca_dev, 0x13, 0xdf);
+			break;
+		case 1: /* 50 hz */
+			i2c_w1(gspca_dev, 0x13, 0xff);
+			i2c_w1(gspca_dev, 0x3b, 0x0a);
+			break;
+		case 2: /* 60 hz */
+			i2c_w1(gspca_dev, 0x13, 0xff);
+			i2c_w1(gspca_dev, 0x3b, 0x02);
+			break;
+		}
+	} else {
+		u8 reg2a = 0, reg2b = 0, reg2d = 0;
+
+		/* Get reg2a / reg2d base values */
+		switch (sd->sensor) {
+		case SENSOR_OV7630:
+			reg2a = 0x08;
+			reg2d = 0x01;
+			break;
+		case SENSOR_OV7648:
+			reg2a = 0x11;
+			reg2d = 0x81;
+			break;
+		}
+
+		switch (sd->freq) {
+		case 0: /* Banding filter disabled */
+			break;
+		case 1: /* 50 hz (filter on and framerate adj) */
+			reg2a |= 0x80;
+			reg2b = 0xac;
+			reg2d |= 0x04;
+			break;
+		case 2: /* 60 hz (filter on, no framerate adj) */
+			reg2a |= 0x80;
+			reg2d |= 0x04;
+			break;
+		}
+		i2c_w1(gspca_dev, 0x2a, reg2a);
+		i2c_w1(gspca_dev, 0x2b, reg2b);
+		i2c_w1(gspca_dev, 0x2d, reg2d);
+	}
+}
+
 static void setjpegqual(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -1828,6 +1908,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	setbrightness(gspca_dev);
 	setcontrast(gspca_dev);
 	setautogain(gspca_dev);
+	setfreq(gspca_dev);
 	return 0;
 }
 
@@ -2131,6 +2212,24 @@ static int sd_getinfrared(struct gspca_dev *gspca_dev, __s32 *val)
 	return 0;
 }
 
+static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->freq = val;
+	if (gspca_dev->streaming)
+		setfreq(gspca_dev);
+	return 0;
+}
+
+static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->freq;
+	return 0;
+}
+
 static int sd_set_jcomp(struct gspca_dev *gspca_dev,
 			struct v4l2_jpegcompression *jcomp)
 {
@@ -2159,6 +2258,27 @@ static int sd_get_jcomp(struct gspca_dev *gspca_dev,
 	return 0;
 }
 
+static int sd_querymenu(struct gspca_dev *gspca_dev,
+			struct v4l2_querymenu *menu)
+{
+	switch (menu->id) {
+	case V4L2_CID_POWER_LINE_FREQUENCY:
+		switch (menu->index) {
+		case 0:		/* V4L2_CID_POWER_LINE_FREQUENCY_DISABLED */
+			strcpy((char *) menu->name, "NoFliker");
+			return 0;
+		case 1:		/* V4L2_CID_POWER_LINE_FREQUENCY_50HZ */
+			strcpy((char *) menu->name, "50 Hz");
+			return 0;
+		case 2:		/* V4L2_CID_POWER_LINE_FREQUENCY_60HZ */
+			strcpy((char *) menu->name, "60 Hz");
+			return 0;
+		}
+		break;
+	}
+	return -EINVAL;
+}
+
 /* sub-driver description */
 static const struct sd_desc sd_desc = {
 	.name = MODULE_NAME,
@@ -2173,6 +2293,7 @@ static const struct sd_desc sd_desc = {
 	.dq_callback = do_autogain,
 	.get_jcomp = sd_get_jcomp,
 	.set_jcomp = sd_set_jcomp,
+	.querymenu = sd_querymenu,
 };
 
 /* -- module initialisation -- */
@@ -2233,7 +2354,7 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x0c45, 0x613b), BSI(SN9C120, OV7660, 0x21)},
 #endif
 	{USB_DEVICE(0x0c45, 0x613c), BSI(SN9C120, HV7131R, 0x11)},
-/*	{USB_DEVICE(0x0c45, 0x613e), BSI(SN9C120, OV7630, 0x??)}, */
+	{USB_DEVICE(0x0c45, 0x613e), BSI(SN9C120, OV7630, 0x21)},
 	{USB_DEVICE(0x0c45, 0x6143), BSI(SN9C120, SP80708, 0x18)},
 	{}
 };
diff --git a/drivers/media/video/gspca/stv06xx/Makefile b/drivers/media/video/gspca/stv06xx/Makefile
index feeaa94ab58..2f3c3a606ce 100644
--- a/drivers/media/video/gspca/stv06xx/Makefile
+++ b/drivers/media/video/gspca/stv06xx/Makefile
@@ -3,7 +3,8 @@ obj-$(CONFIG_USB_STV06XX) += gspca_stv06xx.o
 gspca_stv06xx-objs := stv06xx.o \
 		      stv06xx_vv6410.o \
 		      stv06xx_hdcs.o \
-		      stv06xx_pb0100.o
+		      stv06xx_pb0100.o \
+		      stv06xx_st6422.o
 
 EXTRA_CFLAGS += -Idrivers/media/video/gspca
 
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.c b/drivers/media/video/gspca/stv06xx/stv06xx.c
index e573c340632..0da8e0de045 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx.c
@@ -92,11 +92,10 @@ static int stv06xx_write_sensor_finish(struct sd *sd)
 {
 	int err = 0;
 
-	if (IS_850(sd)) {
+	if (sd->bridge == BRIDGE_STV610) {
 		struct usb_device *udev = sd->gspca_dev.dev;
 		__u8 *buf = sd->gspca_dev.usb_buf;
 
-		/* Quickam Web needs an extra packet */
 		buf[0] = 0;
 		err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				      0x04, 0x40, 0x1704, 0, buf, 1,
@@ -253,7 +252,7 @@ static int stv06xx_init(struct gspca_dev *gspca_dev)
 
 	err = sd->sensor->init(sd);
 
-	if (dump_sensor)
+	if (dump_sensor && sd->sensor->dump)
 		sd->sensor->dump(sd);
 
 	return (err < 0) ? err : 0;
@@ -318,6 +317,8 @@ static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev,
 			__u8 *data,			/* isoc packet */
 			int len)			/* iso packet length */
 {
+	struct sd *sd = (struct sd *) gspca_dev;
+
 	PDEBUG(D_PACK, "Packet of length %d arrived", len);
 
 	/* A packet may contain several frames
@@ -343,14 +344,29 @@ static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev,
 		if (len < chunk_len) {
 			PDEBUG(D_ERR, "URB packet length is smaller"
 				" than the specified chunk length");
+			gspca_dev->last_packet_type = DISCARD_PACKET;
 			return;
 		}
 
+		/* First byte seem to be 02=data 2nd byte is unknown??? */
+		if (sd->bridge == BRIDGE_ST6422 && (id & 0xFF00) == 0x0200)
+			goto frame_data;
+
 		switch (id) {
 		case 0x0200:
 		case 0x4200:
+frame_data:
 			PDEBUG(D_PACK, "Frame data packet detected");
 
+			if (sd->to_skip) {
+				int skip = (sd->to_skip < chunk_len) ?
+					    sd->to_skip : chunk_len;
+				data += skip;
+				len -= skip;
+				chunk_len -= skip;
+				sd->to_skip -= skip;
+			}
+
 			gspca_frame_add(gspca_dev, INTER_PACKET, frame,
 					data, chunk_len);
 			break;
@@ -365,6 +381,9 @@ static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev,
 			gspca_frame_add(gspca_dev, FIRST_PACKET,
 					frame, data, 0);
 
+			if (sd->bridge == BRIDGE_ST6422)
+				sd->to_skip = gspca_dev->width * 4;
+
 			if (chunk_len)
 				PDEBUG(D_ERR, "Chunk length is "
 					      "non-zero on a SOF");
@@ -395,8 +414,12 @@ static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev,
 			/* Unknown chunk with 2 bytes of data,
 			   occurs 2-3 times per USB interrupt */
 			break;
+		case 0x42ff:
+			PDEBUG(D_PACK, "Chunk 0x42ff detected");
+			/* Special chunk seen sometimes on the ST6422 */
+			break;
 		default:
-			PDEBUG(D_PACK, "Unknown chunk %d detected", id);
+			PDEBUG(D_PACK, "Unknown chunk 0x%04x detected", id);
 			/* Unknown chunk */
 		}
 		data    += chunk_len;
@@ -428,11 +451,16 @@ static int stv06xx_config(struct gspca_dev *gspca_dev,
 
 	cam = &gspca_dev->cam;
 	sd->desc = sd_desc;
+	sd->bridge = id->driver_info;
 	gspca_dev->sd_desc = &sd->desc;
 
 	if (dump_bridge)
 		stv06xx_dump_bridge(sd);
 
+	sd->sensor = &stv06xx_sensor_st6422;
+	if (!sd->sensor->probe(sd))
+		return 0;
+
 	sd->sensor = &stv06xx_sensor_vv6410;
 	if (!sd->sensor->probe(sd))
 		return 0;
@@ -457,9 +485,20 @@ static int stv06xx_config(struct gspca_dev *gspca_dev,
 
 /* -- module initialisation -- */
 static const __devinitdata struct usb_device_id device_table[] = {
-	{USB_DEVICE(0x046d, 0x0840)}, /* QuickCam Express */
-	{USB_DEVICE(0x046d, 0x0850)}, /* LEGO cam / QuickCam Web */
-	{USB_DEVICE(0x046d, 0x0870)}, /* Dexxa WebCam USB */
+	/* QuickCam Express */
+	{USB_DEVICE(0x046d, 0x0840), .driver_info = BRIDGE_STV600 },
+	/* LEGO cam / QuickCam Web */
+	{USB_DEVICE(0x046d, 0x0850), .driver_info = BRIDGE_STV610 },
+	/* Dexxa WebCam USB */
+	{USB_DEVICE(0x046d, 0x0870), .driver_info = BRIDGE_STV602 },
+	/* QuickCam Messenger */
+	{USB_DEVICE(0x046D, 0x08F0), .driver_info = BRIDGE_ST6422 },
+	/* QuickCam Communicate */
+	{USB_DEVICE(0x046D, 0x08F5), .driver_info = BRIDGE_ST6422 },
+	/* QuickCam Messenger (new) */
+	{USB_DEVICE(0x046D, 0x08F6), .driver_info = BRIDGE_ST6422 },
+	/* QuickCam Messenger (new) */
+	{USB_DEVICE(0x046D, 0x08DA), .driver_info = BRIDGE_ST6422 },
 	{}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.h b/drivers/media/video/gspca/stv06xx/stv06xx.h
index 1207e7d17f1..9df7137fe67 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx.h
@@ -93,6 +93,17 @@ struct sd {
 
 	/* Sensor private data */
 	void *sensor_priv;
+
+	/* The first 4 lines produced by the stv6422 are no good, this keeps
+	   track of how many bytes we still need to skip during a frame */
+	int to_skip;
+
+	/* Bridge / Camera type */
+	u8 bridge;
+	#define BRIDGE_STV600 0
+	#define BRIDGE_STV602 1
+	#define BRIDGE_STV610 2
+	#define BRIDGE_ST6422 3 /* With integrated sensor */
 };
 
 int stv06xx_write_bridge(struct sd *sd, u16 address, u16 i2c_data);
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
index b1690381420..3039ec208f3 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
@@ -434,7 +434,7 @@ static int hdcs_probe_1x00(struct sd *sd)
 	hdcs->exp.er = 100;
 
 	/*
-	 * Frame rate on HDCS-1000 0x46D:0x840 depends on PSMP:
+	 * Frame rate on HDCS-1000 with STV600 depends on PSMP:
 	 *  4 = doesn't work at all
 	 *  5 = 7.8 fps,
 	 *  6 = 6.9 fps,
@@ -443,7 +443,7 @@ static int hdcs_probe_1x00(struct sd *sd)
 	 * 15 = 4.4 fps,
 	 * 31 = 2.8 fps
 	 *
-	 * Frame rate on HDCS-1000 0x46D:0x870 depends on PSMP:
+	 * Frame rate on HDCS-1000 with STV602 depends on PSMP:
 	 * 15 = doesn't work at all
 	 * 18 = doesn't work at all
 	 * 19 = 7.3 fps
@@ -453,7 +453,7 @@ static int hdcs_probe_1x00(struct sd *sd)
 	 * 24 = 6.3 fps
 	 * 30 = 5.4 fps
 	 */
-	hdcs->psmp = IS_870(sd) ? 20 : 5;
+	hdcs->psmp = (sd->bridge == BRIDGE_STV602) ? 20 : 5;
 
 	sd->sensor_priv = hdcs;
 
@@ -530,7 +530,7 @@ static int hdcs_init(struct sd *sd)
 	int i, err = 0;
 
 	/* Set the STV0602AA in STV0600 emulation mode */
-	if (IS_870(sd))
+	if (sd->bridge == BRIDGE_STV602)
 		stv06xx_write_bridge(sd, STV_STV0600_EMULATION, 1);
 
 	/* Execute the bridge init */
@@ -558,7 +558,7 @@ static int hdcs_init(struct sd *sd)
 		return err;
 
 	/* Set PGA sample duration
-	(was 0x7E for IS_870, but caused slow framerate with HDCS-1020) */
+	(was 0x7E for the STV602, but caused slow framerate with HDCS-1020) */
 	if (IS_1020(sd))
 		err = stv06xx_write_sensor(sd, HDCS_TCTRL,
 				(HDCS_ADC_START_SIG_DUR << 6) | hdcs->psmp);
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h b/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h
index e88c42f7d2f..934b9cebc1a 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h
@@ -32,14 +32,13 @@
 
 #include "stv06xx.h"
 
-#define IS_850(sd)	((sd)->gspca_dev.dev->descriptor.idProduct == 0x850)
-#define IS_870(sd)	((sd)->gspca_dev.dev->descriptor.idProduct == 0x870)
 #define IS_1020(sd)	((sd)->sensor == &stv06xx_sensor_hdcs1020)
 
 extern const struct stv06xx_sensor stv06xx_sensor_vv6410;
 extern const struct stv06xx_sensor stv06xx_sensor_hdcs1x00;
 extern const struct stv06xx_sensor stv06xx_sensor_hdcs1020;
 extern const struct stv06xx_sensor stv06xx_sensor_pb0100;
+extern const struct stv06xx_sensor stv06xx_sensor_st6422;
 
 struct stv06xx_sensor {
 	/* Defines the name of a sensor */
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c
new file mode 100644
index 00000000000..87cb5b9ddfa
--- /dev/null
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c
@@ -0,0 +1,453 @@
+/*
+ * Support for the sensor part which is integrated (I think) into the
+ * st6422 stv06xx alike bridge, as its integrated there are no i2c writes
+ * but instead direct bridge writes.
+ *
+ * Copyright (c) 2009 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Strongly based on qc-usb-messenger, which is:
+ * Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher
+ *		      Mark Cave-Ayland, Carlo E Prelz, Dick Streefland
+ * Copyright (c) 2002, 2003 Tuukka Toivonen
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include "stv06xx_st6422.h"
+
+static struct v4l2_pix_format st6422_mode[] = {
+	/* Note we actually get 124 lines of data, of which we skip the 4st
+	   4 as they are garbage */
+	{
+		162,
+		120,
+		V4L2_PIX_FMT_SGRBG8,
+		V4L2_FIELD_NONE,
+		.sizeimage = 162 * 120,
+		.bytesperline = 162,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 1
+	},
+	/* Note we actually get 248 lines of data, of which we skip the 4st
+	   4 as they are garbage, and we tell the app it only gets the
+	   first 240 of the 244 lines it actually gets, so that it ignores
+	   the last 4. */
+	{
+		324,
+		240,
+		V4L2_PIX_FMT_SGRBG8,
+		V4L2_FIELD_NONE,
+		.sizeimage = 324 * 244,
+		.bytesperline = 324,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 0
+	},
+};
+
+static const struct ctrl st6422_ctrl[] = {
+#define BRIGHTNESS_IDX 0
+	{
+		{
+			.id		= V4L2_CID_BRIGHTNESS,
+			.type		= V4L2_CTRL_TYPE_INTEGER,
+			.name		= "Brightness",
+			.minimum	= 0,
+			.maximum	= 31,
+			.step		= 1,
+			.default_value  = 3
+		},
+		.set = st6422_set_brightness,
+		.get = st6422_get_brightness
+	},
+#define CONTRAST_IDX 1
+	{
+		{
+			.id		= V4L2_CID_CONTRAST,
+			.type		= V4L2_CTRL_TYPE_INTEGER,
+			.name		= "Contrast",
+			.minimum	= 0,
+			.maximum	= 15,
+			.step		= 1,
+			.default_value  = 11
+		},
+		.set = st6422_set_contrast,
+		.get = st6422_get_contrast
+	},
+#define GAIN_IDX 2
+	{
+		{
+			.id		= V4L2_CID_GAIN,
+			.type		= V4L2_CTRL_TYPE_INTEGER,
+			.name		= "Gain",
+			.minimum	= 0,
+			.maximum	= 255,
+			.step		= 1,
+			.default_value  = 64
+		},
+		.set = st6422_set_gain,
+		.get = st6422_get_gain
+	},
+#define EXPOSURE_IDX 3
+	{
+		{
+			.id		= V4L2_CID_EXPOSURE,
+			.type		= V4L2_CTRL_TYPE_INTEGER,
+			.name		= "Exposure",
+			.minimum	= 0,
+			.maximum	= 1023,
+			.step		= 1,
+			.default_value  = 256
+		},
+		.set = st6422_set_exposure,
+		.get = st6422_get_exposure
+	},
+};
+
+static int st6422_probe(struct sd *sd)
+{
+	int i;
+	s32 *sensor_settings;
+
+	if (sd->bridge != BRIDGE_ST6422)
+		return -ENODEV;
+
+	info("st6422 sensor detected");
+
+	sensor_settings = kmalloc(ARRAY_SIZE(st6422_ctrl) * sizeof(s32),
+				  GFP_KERNEL);
+	if (!sensor_settings)
+		return -ENOMEM;
+
+	sd->gspca_dev.cam.cam_mode = st6422_mode;
+	sd->gspca_dev.cam.nmodes = ARRAY_SIZE(st6422_mode);
+	sd->desc.ctrls = st6422_ctrl;
+	sd->desc.nctrls = ARRAY_SIZE(st6422_ctrl);
+	sd->sensor_priv = sensor_settings;
+
+	for (i = 0; i < sd->desc.nctrls; i++)
+		sensor_settings[i] = st6422_ctrl[i].qctrl.default_value;
+
+	return 0;
+}
+
+static int st6422_init(struct sd *sd)
+{
+	int err = 0, i;
+
+	const u16 st6422_bridge_init[][2] = {
+		{ STV_ISO_ENABLE, 0x00 }, /* disable capture */
+		{ 0x1436, 0x00 },
+		{ 0x1432, 0x03 },	/* 0x00-0x1F brightness */
+		{ 0x143a, 0xF9 },	/* 0x00-0x0F contrast */
+		{ 0x0509, 0x38 },	/* R */
+		{ 0x050a, 0x38 },	/* G */
+		{ 0x050b, 0x38 },	/* B */
+		{ 0x050c, 0x2A },
+		{ 0x050d, 0x01 },
+
+
+		{ 0x1431, 0x00 },	/* 0x00-0x07 ??? */
+		{ 0x1433, 0x34 },	/* 160x120, 0x00-0x01 night filter */
+		{ 0x1438, 0x18 },	/* 640x480 */
+/* 18 bayes */
+/* 10 compressed? */
+
+		{ 0x1439, 0x00 },
+/* antiflimmer??  0xa2 ger perfekt bild mot monitor */
+
+		{ 0x143b, 0x05 },
+		{ 0x143c, 0x00 },	/* 0x00-0x01 - ??? */
+
+
+/* shutter time 0x0000-0x03FF */
+/* low value  give good picures on moving objects (but requires much light) */
+/* high value gives good picures in darkness (but tends to be overexposed) */
+		{ 0x143e, 0x01 },
+		{ 0x143d, 0x00 },
+
+		{ 0x1442, 0xe2 },
+/* write: 1x1x xxxx */
+/* read:  1x1x xxxx */
+/*        bit 5 == button pressed and hold if 0 */
+/* write 0xe2,0xea */
+
+/* 0x144a */
+/* 0x00 init */
+/* bit 7 == button has been pressed, but not handled */
+
+/* interrupt */
+/* if(urb->iso_frame_desc[i].status == 0x80) { */
+/* if(urb->iso_frame_desc[i].status == 0x88) { */
+
+		{ 0x1500, 0xd0 },
+		{ 0x1500, 0xd0 },
+		{ 0x1500, 0x50 },	/* 0x00 - 0xFF  0x80 == compr ? */
+
+		{ 0x1501, 0xaf },
+/* high val-> ljus area blir morkare. */
+/* low val -> ljus area blir ljusare. */
+		{ 0x1502, 0xc2 },
+/* high val-> ljus area blir morkare. */
+/* low val -> ljus area blir ljusare. */
+		{ 0x1503, 0x45 },
+/* high val-> ljus area blir morkare. */
+/* low val -> ljus area blir ljusare. */
+
+		{ 0x1505, 0x02 },
+/* 2  : 324x248  80352 bytes */
+/* 7  : 248x162  40176 bytes */
+/* c+f: 162*124  20088 bytes */
+
+		{ 0x150e, 0x8e },
+		{ 0x150f, 0x37 },
+		{ 0x15c0, 0x00 },
+		{ 0x15c1, 1023 }, /* 160x120, ISOC_PACKET_SIZE */
+		{ 0x15c3, 0x08 },	/* 0x04/0x14 ... test pictures ??? */
+
+
+		{ 0x143f, 0x01 },	/* commit settings */
+
+	};
+
+	for (i = 0; i < ARRAY_SIZE(st6422_bridge_init) && !err; i++) {
+		err = stv06xx_write_bridge(sd, st6422_bridge_init[i][0],
+					       st6422_bridge_init[i][1]);
+	}
+
+	return err;
+}
+
+static void st6422_disconnect(struct sd *sd)
+{
+	sd->sensor = NULL;
+	kfree(sd->sensor_priv);
+}
+
+static int st6422_start(struct sd *sd)
+{
+	int err, packet_size;
+	struct cam *cam = &sd->gspca_dev.cam;
+	s32 *sensor_settings = sd->sensor_priv;
+	struct usb_host_interface *alt;
+	struct usb_interface *intf;
+
+	intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface);
+	alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
+	if (!alt) {
+		PDEBUG(D_ERR, "Couldn't get altsetting");
+		return -EIO;
+	}
+
+	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
+	err = stv06xx_write_bridge(sd, 0x15c1, packet_size);
+	if (err < 0)
+		return err;
+
+	if (cam->cam_mode[sd->gspca_dev.curr_mode].priv)
+		err = stv06xx_write_bridge(sd, 0x1505, 0x0f);
+	else
+		err = stv06xx_write_bridge(sd, 0x1505, 0x02);
+	if (err < 0)
+		return err;
+
+	err = st6422_set_brightness(&sd->gspca_dev,
+				    sensor_settings[BRIGHTNESS_IDX]);
+	if (err < 0)
+		return err;
+
+	err = st6422_set_contrast(&sd->gspca_dev,
+				  sensor_settings[CONTRAST_IDX]);
+	if (err < 0)
+		return err;
+
+	err = st6422_set_exposure(&sd->gspca_dev,
+				  sensor_settings[EXPOSURE_IDX]);
+	if (err < 0)
+		return err;
+
+	err = st6422_set_gain(&sd->gspca_dev,
+			      sensor_settings[GAIN_IDX]);
+	if (err < 0)
+		return err;
+
+	PDEBUG(D_STREAM, "Starting stream");
+
+	return 0;
+}
+
+static int st6422_stop(struct sd *sd)
+{
+	PDEBUG(D_STREAM, "Halting stream");
+
+	return 0;
+}
+
+static int st6422_get_brightness(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	*val = sensor_settings[BRIGHTNESS_IDX];
+
+	PDEBUG(D_V4L2, "Read brightness %d", *val);
+
+	return 0;
+}
+
+static int st6422_set_brightness(struct gspca_dev *gspca_dev, __s32 val)
+{
+	int err;
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	sensor_settings[BRIGHTNESS_IDX] = val;
+
+	if (!gspca_dev->streaming)
+		return 0;
+
+	/* val goes from 0 -> 31 */
+	PDEBUG(D_V4L2, "Set brightness to %d", val);
+	err = stv06xx_write_bridge(sd, 0x1432, val);
+	if (err < 0)
+		return err;
+
+	/* commit settings */
+	err = stv06xx_write_bridge(sd, 0x143f, 0x01);
+	return (err < 0) ? err : 0;
+}
+
+static int st6422_get_contrast(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	*val = sensor_settings[CONTRAST_IDX];
+
+	PDEBUG(D_V4L2, "Read contrast %d", *val);
+
+	return 0;
+}
+
+static int st6422_set_contrast(struct gspca_dev *gspca_dev, __s32 val)
+{
+	int err;
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	sensor_settings[CONTRAST_IDX] = val;
+
+	if (!gspca_dev->streaming)
+		return 0;
+
+	/* Val goes from 0 -> 15 */
+	PDEBUG(D_V4L2, "Set contrast to %d\n", val);
+	err = stv06xx_write_bridge(sd, 0x143a, 0xf0 | val);
+	if (err < 0)
+		return err;
+
+	/* commit settings */
+	err = stv06xx_write_bridge(sd, 0x143f, 0x01);
+	return (err < 0) ? err : 0;
+}
+
+static int st6422_get_gain(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	*val = sensor_settings[GAIN_IDX];
+
+	PDEBUG(D_V4L2, "Read gain %d", *val);
+
+	return 0;
+}
+
+static int st6422_set_gain(struct gspca_dev *gspca_dev, __s32 val)
+{
+	int err;
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	sensor_settings[GAIN_IDX] = val;
+
+	if (!gspca_dev->streaming)
+		return 0;
+
+	PDEBUG(D_V4L2, "Set gain to %d", val);
+
+	/* Set red, green, blue, gain */
+	err = stv06xx_write_bridge(sd, 0x0509, val);
+	if (err < 0)
+		return err;
+
+	err = stv06xx_write_bridge(sd, 0x050a, val);
+	if (err < 0)
+		return err;
+
+	err = stv06xx_write_bridge(sd, 0x050b, val);
+	if (err < 0)
+		return err;
+
+	/* 2 mystery writes */
+	err = stv06xx_write_bridge(sd, 0x050c, 0x2a);
+	if (err < 0)
+		return err;
+
+	err = stv06xx_write_bridge(sd, 0x050d, 0x01);
+	if (err < 0)
+		return err;
+
+	/* commit settings */
+	err = stv06xx_write_bridge(sd, 0x143f, 0x01);
+	return (err < 0) ? err : 0;
+}
+
+static int st6422_get_exposure(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	*val = sensor_settings[EXPOSURE_IDX];
+
+	PDEBUG(D_V4L2, "Read exposure %d", *val);
+
+	return 0;
+}
+
+static int st6422_set_exposure(struct gspca_dev *gspca_dev, __s32 val)
+{
+	int err;
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	sensor_settings[EXPOSURE_IDX] = val;
+
+	if (!gspca_dev->streaming)
+		return 0;
+
+	PDEBUG(D_V4L2, "Set exposure to %d\n", val);
+	err = stv06xx_write_bridge(sd, 0x143d, val & 0xff);
+	if (err < 0)
+		return err;
+
+	err = stv06xx_write_bridge(sd, 0x143e, val >> 8);
+	if (err < 0)
+		return err;
+
+	/* commit settings */
+	err = stv06xx_write_bridge(sd, 0x143f, 0x01);
+	return (err < 0) ? err : 0;
+}
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h
new file mode 100644
index 00000000000..b2d45fe5052
--- /dev/null
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h
@@ -0,0 +1,59 @@
+/*
+ * Support for the sensor part which is integrated (I think) into the
+ * st6422 stv06xx alike bridge, as its integrated there are no i2c writes
+ * but instead direct bridge writes.
+ *
+ * Copyright (c) 2009 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Strongly based on qc-usb-messenger, which is:
+ * Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher
+ *		      Mark Cave-Ayland, Carlo E Prelz, Dick Streefland
+ * Copyright (c) 2002, 2003 Tuukka Toivonen
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef STV06XX_ST6422_H_
+#define STV06XX_ST6422_H_
+
+#include "stv06xx_sensor.h"
+
+static int st6422_probe(struct sd *sd);
+static int st6422_start(struct sd *sd);
+static int st6422_init(struct sd *sd);
+static int st6422_stop(struct sd *sd);
+static void st6422_disconnect(struct sd *sd);
+
+/* V4L2 controls supported by the driver */
+static int st6422_get_brightness(struct gspca_dev *gspca_dev, __s32 *val);
+static int st6422_set_brightness(struct gspca_dev *gspca_dev, __s32 val);
+static int st6422_get_contrast(struct gspca_dev *gspca_dev, __s32 *val);
+static int st6422_set_contrast(struct gspca_dev *gspca_dev, __s32 val);
+static int st6422_get_gain(struct gspca_dev *gspca_dev, __s32 *val);
+static int st6422_set_gain(struct gspca_dev *gspca_dev, __s32 val);
+static int st6422_get_exposure(struct gspca_dev *gspca_dev, __s32 *val);
+static int st6422_set_exposure(struct gspca_dev *gspca_dev, __s32 val);
+
+const struct stv06xx_sensor stv06xx_sensor_st6422 = {
+	.name = "ST6422",
+	.init = st6422_init,
+	.probe = st6422_probe,
+	.start = st6422_start,
+	.stop = st6422_stop,
+	.disconnect = st6422_disconnect,
+};
+
+#endif
diff --git a/drivers/media/video/ivtv/ivtv-controls.c b/drivers/media/video/ivtv/ivtv-controls.c
index 84995bcf4a7..a3b77ed3f08 100644
--- a/drivers/media/video/ivtv/ivtv-controls.c
+++ b/drivers/media/video/ivtv/ivtv-controls.c
@@ -60,6 +60,8 @@ int ivtv_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *qctrl)
 
 	switch (qctrl->id) {
 	/* Standard V4L2 controls */
+	case V4L2_CID_USER_CLASS:
+		return v4l2_ctrl_query_fill(qctrl, 0, 0, 0, 0);
 	case V4L2_CID_BRIGHTNESS:
 	case V4L2_CID_HUE:
 	case V4L2_CID_SATURATION:
diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c
index 459c04cbf69..4d794b42d6c 100644
--- a/drivers/media/video/mt9m001.c
+++ b/drivers/media/video/mt9m001.c
@@ -280,15 +280,9 @@ static int mt9m001_try_fmt(struct soc_camera_device *icd,
 {
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 
-	if (pix->height < 32 + icd->y_skip_top)
-		pix->height = 32 + icd->y_skip_top;
-	if (pix->height > 1024 + icd->y_skip_top)
-		pix->height = 1024 + icd->y_skip_top;
-	if (pix->width < 48)
-		pix->width = 48;
-	if (pix->width > 1280)
-		pix->width = 1280;
-	pix->width &= ~0x01; /* has to be even, unsure why was ~3 */
+	v4l_bound_align_image(&pix->width, 48, 1280, 1,
+			      &pix->height, 32 + icd->y_skip_top,
+			      1024 + icd->y_skip_top, 0, 0);
 
 	return 0;
 }
diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c
index f72aeb7c4de..4207fb34267 100644
--- a/drivers/media/video/mt9t031.c
+++ b/drivers/media/video/mt9t031.c
@@ -385,17 +385,9 @@ static int mt9t031_try_fmt(struct soc_camera_device *icd,
 {
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 
-	if (pix->height < MT9T031_MIN_HEIGHT)
-		pix->height = MT9T031_MIN_HEIGHT;
-	if (pix->height > MT9T031_MAX_HEIGHT)
-		pix->height = MT9T031_MAX_HEIGHT;
-	if (pix->width < MT9T031_MIN_WIDTH)
-		pix->width = MT9T031_MIN_WIDTH;
-	if (pix->width > MT9T031_MAX_WIDTH)
-		pix->width = MT9T031_MAX_WIDTH;
-
-	pix->width &= ~0x01; /* has to be even */
-	pix->height &= ~0x01; /* has to be even */
+	v4l_bound_align_image(
+		&pix->width, MT9T031_MIN_WIDTH, MT9T031_MAX_WIDTH, 1,
+		&pix->height, MT9T031_MIN_HEIGHT, MT9T031_MAX_HEIGHT, 1, 0);
 
 	return 0;
 }
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index be20d312b1d..dbdcc86ae50 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -364,15 +364,9 @@ static int mt9v022_try_fmt(struct soc_camera_device *icd,
 {
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 
-	if (pix->height < 32 + icd->y_skip_top)
-		pix->height = 32 + icd->y_skip_top;
-	if (pix->height > 480 + icd->y_skip_top)
-		pix->height = 480 + icd->y_skip_top;
-	if (pix->width < 48)
-		pix->width = 48;
-	if (pix->width > 752)
-		pix->width = 752;
-	pix->width &= ~0x03; /* ? */
+	v4l_bound_align_image(&pix->width, 48, 752, 2 /* ? */,
+			      &pix->height, 32 + icd->y_skip_top,
+			      480 + icd->y_skip_top, 0, 0);
 
 	return 0;
 }
diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c
index 08cfd3e4ae8..0bc2cf573c7 100644
--- a/drivers/media/video/ov511.c
+++ b/drivers/media/video/ov511.c
@@ -211,8 +211,6 @@ static const int i2c_detect_tries = 5;
 static struct usb_device_id device_table [] = {
 	{ USB_DEVICE(VEND_OMNIVISION, PROD_OV511) },
 	{ USB_DEVICE(VEND_OMNIVISION, PROD_OV511PLUS) },
-	{ USB_DEVICE(VEND_OMNIVISION, PROD_OV518) },
-	{ USB_DEVICE(VEND_OMNIVISION, PROD_OV518PLUS) },
 	{ USB_DEVICE(VEND_MATTEL, PROD_ME2CAM) },
 	{ }  /* Terminating entry */
 };
diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c
index c0d91125286..0bce255168b 100644
--- a/drivers/media/video/ov772x.c
+++ b/drivers/media/video/ov772x.c
@@ -1067,10 +1067,12 @@ static int ov772x_probe(struct i2c_client *client,
 	struct i2c_adapter        *adapter = to_i2c_adapter(client->dev.parent);
 	int                        ret;
 
-	info = client->dev.platform_data;
-	if (!info)
+	if (!client->dev.platform_data)
 		return -EINVAL;
 
+	info = container_of(client->dev.platform_data,
+			    struct ov772x_camera_info, link);
+
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 		dev_err(&adapter->dev,
 			"I2C-Adapter doesn't support "
diff --git a/drivers/media/video/pvrusb2/pvrusb2-audio.c b/drivers/media/video/pvrusb2/pvrusb2-audio.c
index 10ef1a2c13e..416933ca607 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-audio.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-audio.c
@@ -48,11 +48,13 @@ static const int routing_scheme0[] = {
 						MSP_DSP_IN_SCART),
 };
 
-static const struct routing_scheme routing_schemes[] = {
-	[PVR2_ROUTING_SCHEME_HAUPPAUGE] = {
-		.def = routing_scheme0,
-		.cnt = ARRAY_SIZE(routing_scheme0),
-	},
+static const struct routing_scheme routing_def0 = {
+	.def = routing_scheme0,
+	.cnt = ARRAY_SIZE(routing_scheme0),
+};
+
+static const struct routing_scheme *routing_schemes[] = {
+	[PVR2_ROUTING_SCHEME_HAUPPAUGE] = &routing_def0,
 };
 
 void pvr2_msp3400_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
@@ -65,7 +67,7 @@ void pvr2_msp3400_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
 		pvr2_trace(PVR2_TRACE_CHIPS, "subdev msp3400 v4l2 set_stereo");
 
 		if ((sid < ARRAY_SIZE(routing_schemes)) &&
-		    ((sp = routing_schemes + sid) != NULL) &&
+		    ((sp = routing_schemes[sid]) != NULL) &&
 		    (hdw->input_val >= 0) &&
 		    (hdw->input_val < sp->cnt)) {
 			input = sp->def[hdw->input_val];
diff --git a/drivers/media/video/pvrusb2/pvrusb2-cs53l32a.c b/drivers/media/video/pvrusb2/pvrusb2-cs53l32a.c
index 9023adf3fdc..68980e19409 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-cs53l32a.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-cs53l32a.c
@@ -49,11 +49,13 @@ static const int routing_scheme1[] = {
 	[PVR2_CVAL_INPUT_SVIDEO] =  0,
 };
 
-static const struct routing_scheme routing_schemes[] = {
-	[PVR2_ROUTING_SCHEME_ONAIR] = {
-		.def = routing_scheme1,
-		.cnt = ARRAY_SIZE(routing_scheme1),
-	},
+static const struct routing_scheme routing_def1 = {
+	.def = routing_scheme1,
+	.cnt = ARRAY_SIZE(routing_scheme1),
+};
+
+static const struct routing_scheme *routing_schemes[] = {
+	[PVR2_ROUTING_SCHEME_ONAIR] = &routing_def1,
 };
 
 
@@ -65,12 +67,11 @@ void pvr2_cs53l32a_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
 		u32 input;
 		pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_input(%d)",
 			   hdw->input_val);
-		if ((sid < ARRAY_SIZE(routing_schemes)) &&
-		    ((sp = routing_schemes + sid) != NULL) &&
-		    (hdw->input_val >= 0) &&
-		    (hdw->input_val < sp->cnt)) {
-			input = sp->def[hdw->input_val];
-		} else {
+		sp = (sid < ARRAY_SIZE(routing_schemes)) ?
+			routing_schemes[sid] : NULL;
+		if ((sp == NULL) ||
+		    (hdw->input_val < 0) ||
+		    (hdw->input_val >= sp->cnt)) {
 			pvr2_trace(PVR2_TRACE_ERROR_LEGS,
 				   "*** WARNING *** subdev v4l2 set_input:"
 				   " Invalid routing scheme (%u)"
@@ -78,6 +79,7 @@ void pvr2_cs53l32a_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
 				   sid, hdw->input_val);
 			return;
 		}
+		input = sp->def[hdw->input_val];
 		sd->ops->audio->s_routing(sd, input, 0, 0);
 	}
 }
diff --git a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c b/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c
index 05e52358ae4..82c13583575 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c
@@ -68,6 +68,11 @@ static const struct routing_scheme_item routing_scheme0[] = {
 	},
 };
 
+static const struct routing_scheme routing_def0 = {
+	.def = routing_scheme0,
+	.cnt = ARRAY_SIZE(routing_scheme0),
+};
+
 /* Specific to gotview device */
 static const struct routing_scheme_item routing_schemegv[] = {
 	[PVR2_CVAL_INPUT_TV] = {
@@ -90,15 +95,14 @@ static const struct routing_scheme_item routing_schemegv[] = {
 	},
 };
 
-static const struct routing_scheme routing_schemes[] = {
-	[PVR2_ROUTING_SCHEME_HAUPPAUGE] = {
-		.def = routing_scheme0,
-		.cnt = ARRAY_SIZE(routing_scheme0),
-	},
-	[PVR2_ROUTING_SCHEME_GOTVIEW] = {
-		.def = routing_schemegv,
-		.cnt = ARRAY_SIZE(routing_schemegv),
-	},
+static const struct routing_scheme routing_defgv = {
+	.def = routing_schemegv,
+	.cnt = ARRAY_SIZE(routing_schemegv),
+};
+
+static const struct routing_scheme *routing_schemes[] = {
+	[PVR2_ROUTING_SCHEME_HAUPPAUGE] = &routing_def0,
+	[PVR2_ROUTING_SCHEME_GOTVIEW] = &routing_defgv,
 };
 
 void pvr2_cx25840_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
@@ -110,13 +114,11 @@ void pvr2_cx25840_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
 		const struct routing_scheme *sp;
 		unsigned int sid = hdw->hdw_desc->signal_routing_scheme;
 
-		if ((sid < ARRAY_SIZE(routing_schemes)) &&
-		    ((sp = routing_schemes + sid) != NULL) &&
-		    (hdw->input_val >= 0) &&
-		    (hdw->input_val < sp->cnt)) {
-			vid_input = sp->def[hdw->input_val].vid;
-			aud_input = sp->def[hdw->input_val].aud;
-		} else {
+		sp = (sid < ARRAY_SIZE(routing_schemes)) ?
+			routing_schemes[sid] : NULL;
+		if ((sp == NULL) ||
+		    (hdw->input_val < 0) ||
+		    (hdw->input_val >= sp->cnt)) {
 			pvr2_trace(PVR2_TRACE_ERROR_LEGS,
 				   "*** WARNING *** subdev cx2584x set_input:"
 				   " Invalid routing scheme (%u)"
@@ -124,7 +126,8 @@ void pvr2_cx25840_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
 				   sid, hdw->input_val);
 			return;
 		}
-
+		vid_input = sp->def[hdw->input_val].vid;
+		aud_input = sp->def[hdw->input_val].aud;
 		pvr2_trace(PVR2_TRACE_CHIPS,
 			   "subdev cx2584x set_input vid=0x%x aud=0x%x",
 			   vid_input, aud_input);
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index 0c745b142fb..cbc388729d7 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -85,8 +85,8 @@ MODULE_PARM_DESC(video_std,"specify initial video standard");
 module_param_array(tolerance,    int, NULL, 0444);
 MODULE_PARM_DESC(tolerance,"specify stream error tolerance");
 
-/* US Broadcast channel 7 (175.25 MHz) */
-static int default_tv_freq    = 175250000L;
+/* US Broadcast channel 3 (61.25 MHz), to help with testing */
+static int default_tv_freq    = 61250000L;
 /* 104.3 MHz, a usable FM station for my area */
 static int default_radio_freq = 104300000L;
 
@@ -1987,6 +1987,34 @@ static unsigned int pvr2_copy_i2c_addr_list(
 }
 
 
+static void pvr2_hdw_cx25840_vbi_hack(struct pvr2_hdw *hdw)
+{
+	/*
+	  Mike Isely <isely@pobox.com> 19-Nov-2006 - This bit of nuttiness
+	  for cx25840 causes that module to correctly set up its video
+	  scaling.  This is really a problem in the cx25840 module itself,
+	  but we work around it here.  The problem has not been seen in
+	  ivtv because there VBI is supported and set up.  We don't do VBI
+	  here (at least not yet) and thus we never attempted to even set
+	  it up.
+	*/
+	struct v4l2_format fmt;
+	if (hdw->decoder_client_id != PVR2_CLIENT_ID_CX25840) {
+		/* We're not using a cx25840 so don't enable the hack */
+		return;
+	}
+
+	pvr2_trace(PVR2_TRACE_INIT,
+		   "Module ID %u:"
+		   " Executing cx25840 VBI hack",
+		   hdw->decoder_client_id);
+	memset(&fmt, 0, sizeof(fmt));
+	fmt.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE;
+	v4l2_device_call_all(&hdw->v4l2_dev, hdw->decoder_client_id,
+			     video, s_fmt, &fmt);
+}
+
+
 static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw,
 				const struct pvr2_device_client_desc *cd)
 {
@@ -2078,30 +2106,6 @@ static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw,
 	/* client-specific setup... */
 	switch (mid) {
 	case PVR2_CLIENT_ID_CX25840:
-		hdw->decoder_client_id = mid;
-		{
-			/*
-			  Mike Isely <isely@pobox.com> 19-Nov-2006 - This
-			  bit of nuttiness for cx25840 causes that module
-			  to correctly set up its video scaling.  This is
-			  really a problem in the cx25840 module itself,
-			  but we work around it here.  The problem has not
-			  been seen in ivtv because there VBI is supported
-			  and set up.  We don't do VBI here (at least not
-			  yet) and thus we never attempted to even set it
-			  up.
-			*/
-			struct v4l2_format fmt;
-			pvr2_trace(PVR2_TRACE_INIT,
-				   "Module ID %u:"
-				   " Executing cx25840 VBI hack",
-				   mid);
-			memset(&fmt, 0, sizeof(fmt));
-			fmt.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE;
-			v4l2_device_call_all(&hdw->v4l2_dev, mid,
-					     video, s_fmt, &fmt);
-		}
-		break;
 	case PVR2_CLIENT_ID_SAA7115:
 		hdw->decoder_client_id = mid;
 		break;
@@ -2202,6 +2206,8 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw)
 		cptr->info->set_value(cptr,~0,cptr->info->default_value);
 	}
 
+	pvr2_hdw_cx25840_vbi_hack(hdw);
+
 	/* Set up special default values for the television and radio
 	   frequencies here.  It's not really important what these defaults
 	   are, but I set them to something usable in the Chicago area just
@@ -2954,6 +2960,7 @@ static void pvr2_subdev_update(struct pvr2_hdw *hdw)
 			vs = hdw->std_mask_cur;
 			v4l2_device_call_all(&hdw->v4l2_dev, 0,
 					     core, s_std, vs);
+			pvr2_hdw_cx25840_vbi_hack(hdw);
 		}
 		hdw->tuner_signal_stale = !0;
 		hdw->cropcap_stale = !0;
@@ -4076,6 +4083,7 @@ int pvr2_hdw_cmd_decoder_reset(struct pvr2_hdw *hdw)
 	if (hdw->decoder_client_id) {
 		v4l2_device_call_all(&hdw->v4l2_dev, hdw->decoder_client_id,
 				     core, reset, 0);
+		pvr2_hdw_cx25840_vbi_hack(hdw);
 		return 0;
 	}
 	pvr2_trace(PVR2_TRACE_INIT,
diff --git a/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c b/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c
index d2fe7c8f2c3..4c96cf48c79 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c
@@ -54,6 +54,11 @@ static const int routing_scheme0[] = {
 	[PVR2_CVAL_INPUT_SVIDEO] =  SAA7115_SVIDEO2,
 };
 
+static const struct routing_scheme routing_def0 = {
+	.def = routing_scheme0,
+	.cnt = ARRAY_SIZE(routing_scheme0),
+};
+
 static const int routing_scheme1[] = {
 	[PVR2_CVAL_INPUT_TV] = SAA7115_COMPOSITE4,
 	[PVR2_CVAL_INPUT_RADIO] = SAA7115_COMPOSITE5,
@@ -61,15 +66,14 @@ static const int routing_scheme1[] = {
 	[PVR2_CVAL_INPUT_SVIDEO] =  SAA7115_SVIDEO2, /* or SVIDEO0, it seems */
 };
 
-static const struct routing_scheme routing_schemes[] = {
-	[PVR2_ROUTING_SCHEME_HAUPPAUGE] = {
-		.def = routing_scheme0,
-		.cnt = ARRAY_SIZE(routing_scheme0),
-	},
-	[PVR2_ROUTING_SCHEME_ONAIR] = {
-		.def = routing_scheme1,
-		.cnt = ARRAY_SIZE(routing_scheme1),
-	},
+static const struct routing_scheme routing_def1 = {
+	.def = routing_scheme1,
+	.cnt = ARRAY_SIZE(routing_scheme1),
+};
+
+static const struct routing_scheme *routing_schemes[] = {
+	[PVR2_ROUTING_SCHEME_HAUPPAUGE] = &routing_def0,
+	[PVR2_ROUTING_SCHEME_ONAIR] = &routing_def1,
 };
 
 void pvr2_saa7115_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
@@ -81,12 +85,12 @@ void pvr2_saa7115_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
 
 		pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_input(%d)",
 			   hdw->input_val);
-		if ((sid < ARRAY_SIZE(routing_schemes)) &&
-		    ((sp = routing_schemes + sid) != NULL) &&
-		    (hdw->input_val >= 0) &&
-		    (hdw->input_val < sp->cnt)) {
-			input = sp->def[hdw->input_val];
-		} else {
+
+		sp = (sid < ARRAY_SIZE(routing_schemes)) ?
+			routing_schemes[sid] : NULL;
+		if ((sp == NULL) ||
+		    (hdw->input_val < 0) ||
+		    (hdw->input_val >= sp->cnt)) {
 			pvr2_trace(PVR2_TRACE_ERROR_LEGS,
 				   "*** WARNING *** subdev v4l2 set_input:"
 				   " Invalid routing scheme (%u)"
@@ -94,6 +98,7 @@ void pvr2_saa7115_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
 				   sid, hdw->input_val);
 			return;
 		}
+		input = sp->def[hdw->input_val];
 		sd->ops->video->s_routing(sd, input, 0, 0);
 	}
 }
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index f60de40fd21..46e0d8ad880 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -163,13 +163,6 @@
 			CICR0_EOFM | CICR0_FOM)
 
 /*
- * YUV422P picture size should be a multiple of 16, so the heuristic aligns
- * height, width on 4 byte boundaries to reach the 16 multiple for the size.
- */
-#define YUV422P_X_Y_ALIGN 4
-#define YUV422P_SIZE_ALIGN YUV422P_X_Y_ALIGN * YUV422P_X_Y_ALIGN
-
-/*
  * Structures
  */
 enum pxa_camera_active_dma {
@@ -1398,28 +1391,15 @@ static int pxa_camera_try_fmt(struct soc_camera_device *icd,
 		return -EINVAL;
 	}
 
-	/* limit to pxa hardware capabilities */
-	if (pix->height < 32)
-		pix->height = 32;
-	if (pix->height > 2048)
-		pix->height = 2048;
-	if (pix->width < 48)
-		pix->width = 48;
-	if (pix->width > 2048)
-		pix->width = 2048;
-	pix->width &= ~0x01;
-
 	/*
-	 * YUV422P planar format requires images size to be a 16 bytes
-	 * multiple. If not, zeros will be inserted between Y and U planes, and
-	 * U and V planes, and YUV422P standard would be violated.
+	 * Limit to pxa hardware capabilities.  YUV422P planar format requires
+	 * images size to be a multiple of 16 bytes.  If not, zeros will be
+	 * inserted between Y and U planes, and U and V planes, which violates
+	 * the YUV422P standard.
 	 */
-	if (xlate->host_fmt->fourcc == V4L2_PIX_FMT_YUV422P) {
-		if (!IS_ALIGNED(pix->width * pix->height, YUV422P_SIZE_ALIGN))
-			pix->height = ALIGN(pix->height, YUV422P_X_Y_ALIGN);
-		if (!IS_ALIGNED(pix->width * pix->height, YUV422P_SIZE_ALIGN))
-			pix->width = ALIGN(pix->width, YUV422P_X_Y_ALIGN);
-	}
+	v4l_bound_align_image(&pix->width, 48, 2048, 1,
+			      &pix->height, 32, 2048, 0,
+			      xlate->host_fmt->fourcc == V4L2_PIX_FMT_YUV422P ? 4 : 0);
 
 	pix->bytesperline = pix->width *
 		DIV_ROUND_UP(xlate->host_fmt->depth, 8);
diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c
index e305c1674ce..ba87128542e 100644
--- a/drivers/media/video/saa7134/saa7134-video.c
+++ b/drivers/media/video/saa7134/saa7134-video.c
@@ -1640,15 +1640,8 @@ static int saa7134_try_fmt_vid_cap(struct file *file, void *priv,
 	}
 
 	f->fmt.pix.field = field;
-	if (f->fmt.pix.width  < 48)
-		f->fmt.pix.width  = 48;
-	if (f->fmt.pix.height < 32)
-		f->fmt.pix.height = 32;
-	if (f->fmt.pix.width > maxw)
-		f->fmt.pix.width = maxw;
-	if (f->fmt.pix.height > maxh)
-		f->fmt.pix.height = maxh;
-	f->fmt.pix.width &= ~0x03;
+	v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2,
+			      &f->fmt.pix.height, 32, maxh, 0, 0);
 	f->fmt.pix.bytesperline =
 		(f->fmt.pix.width * fmt->depth) >> 3;
 	f->fmt.pix.sizeimage =
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index d369e8409ab..0db88a53d92 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -689,16 +689,8 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 
 	/* FIXME: calculate using depth and bus width */
 
-	if (f->fmt.pix.height < 4)
-		f->fmt.pix.height = 4;
-	if (f->fmt.pix.height > 1920)
-		f->fmt.pix.height = 1920;
-	if (f->fmt.pix.width < 2)
-		f->fmt.pix.width = 2;
-	if (f->fmt.pix.width > 2560)
-		f->fmt.pix.width = 2560;
-	f->fmt.pix.width &= ~0x01;
-	f->fmt.pix.height &= ~0x03;
+	v4l_bound_align_image(&f->fmt.pix.width, 2, 2560, 1,
+			      &f->fmt.pix.height, 4, 1920, 2, 0);
 
 	f->fmt.pix.bytesperline = f->fmt.pix.width *
 		DIV_ROUND_UP(xlate->host_fmt->depth, 8);
diff --git a/drivers/media/video/tcm825x.c b/drivers/media/video/tcm825x.c
index b30c4924821..b90e9da3167 100644
--- a/drivers/media/video/tcm825x.c
+++ b/drivers/media/video/tcm825x.c
@@ -878,7 +878,7 @@ static int tcm825x_probe(struct i2c_client *client,
 	return rval;
 }
 
-static int __exit tcm825x_remove(struct i2c_client *client)
+static int tcm825x_remove(struct i2c_client *client)
 {
 	struct tcm825x_sensor *sensor = i2c_get_clientdata(client);
 
@@ -902,7 +902,7 @@ static struct i2c_driver tcm825x_i2c_driver = {
 		.name = TCM825X_NAME,
 	},
 	.probe	= tcm825x_probe,
-	.remove	= __exit_p(tcm825x_remove),
+	.remove	= tcm825x_remove,
 	.id_table = tcm825x_id,
 };
 
diff --git a/drivers/media/video/tw9910.c b/drivers/media/video/tw9910.c
index a3994764399..aa5065ea09e 100644
--- a/drivers/media/video/tw9910.c
+++ b/drivers/media/video/tw9910.c
@@ -875,10 +875,12 @@ static int tw9910_probe(struct i2c_client *client,
 	const struct tw9910_scale_ctrl *scale;
 	int                             i, ret;
 
-	info = client->dev.platform_data;
-	if (!info)
+	if (!client->dev.platform_data)
 		return -EINVAL;
 
+	info = container_of(client->dev.platform_data,
+			    struct tw9910_video_info, link);
+
 	if (!i2c_check_functionality(to_i2c_adapter(client->dev.parent),
 				     I2C_FUNC_SMBUS_BYTE_DATA)) {
 		dev_err(&client->dev,
diff --git a/drivers/media/video/usbvideo/Kconfig b/drivers/media/video/usbvideo/Kconfig
index e4cb99c1f94..adb1c044ad7 100644
--- a/drivers/media/video/usbvideo/Kconfig
+++ b/drivers/media/video/usbvideo/Kconfig
@@ -38,10 +38,13 @@ config USB_KONICAWC
 	  module will be called konicawc.
 
 config USB_QUICKCAM_MESSENGER
-	tristate "USB Logitech Quickcam Messenger"
+	tristate "USB Logitech Quickcam Messenger (DEPRECATED)"
 	depends on VIDEO_V4L1
 	select VIDEO_USBVIDEO
 	---help---
+	  This driver is DEPRECATED please use the gspca stv06xx module
+	  instead.
+
 	  Say Y or M here to enable support for the USB Logitech Quickcam
 	  Messenger webcam.
 
diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c
index f96475626da..b91d66a767d 100644
--- a/drivers/media/video/v4l2-common.c
+++ b/drivers/media/video/v4l2-common.c
@@ -802,6 +802,17 @@ struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev,
 	/* Decrease the module use count to match the first try_module_get. */
 	module_put(client->driver->driver.owner);
 
+	if (sd) {
+		/* We return errors from v4l2_subdev_call only if we have the
+		   callback as the .s_config is not mandatory */
+		int err = v4l2_subdev_call(sd, core, s_config, 0, NULL);
+
+		if (err && err != -ENOIOCTLCMD) {
+			v4l2_device_unregister_subdev(sd);
+			sd = NULL;
+		}
+	}
+
 error:
 	/* If we have a client but no subdev, then something went wrong and
 	   we must unregister the client. */
@@ -852,6 +863,17 @@ struct v4l2_subdev *v4l2_i2c_new_probed_subdev(struct v4l2_device *v4l2_dev,
 	/* Decrease the module use count to match the first try_module_get. */
 	module_put(client->driver->driver.owner);
 
+	if (sd) {
+		/* We return errors from v4l2_subdev_call only if we have the
+		   callback as the .s_config is not mandatory */
+		int err = v4l2_subdev_call(sd, core, s_config, 0, NULL);
+
+		if (err && err != -ENOIOCTLCMD) {
+			v4l2_device_unregister_subdev(sd);
+			sd = NULL;
+		}
+	}
+
 error:
 	/* If we have a client but no subdev, then something went wrong and
 	   we must unregister the client. */
@@ -872,6 +894,89 @@ struct v4l2_subdev *v4l2_i2c_new_probed_subdev_addr(struct v4l2_device *v4l2_dev
 }
 EXPORT_SYMBOL_GPL(v4l2_i2c_new_probed_subdev_addr);
 
+/* Load an i2c sub-device. */
+struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev,
+		struct i2c_adapter *adapter, const char *module_name,
+		struct i2c_board_info *info, const unsigned short *probe_addrs)
+{
+	struct v4l2_subdev *sd = NULL;
+	struct i2c_client *client;
+
+	BUG_ON(!v4l2_dev);
+
+	if (module_name)
+		request_module(module_name);
+
+	/* Create the i2c client */
+	if (info->addr == 0 && probe_addrs)
+		client = i2c_new_probed_device(adapter, info, probe_addrs);
+	else
+		client = i2c_new_device(adapter, info);
+
+	/* Note: by loading the module first we are certain that c->driver
+	   will be set if the driver was found. If the module was not loaded
+	   first, then the i2c core tries to delay-load the module for us,
+	   and then c->driver is still NULL until the module is finally
+	   loaded. This delay-load mechanism doesn't work if other drivers
+	   want to use the i2c device, so explicitly loading the module
+	   is the best alternative. */
+	if (client == NULL || client->driver == NULL)
+		goto error;
+
+	/* Lock the module so we can safely get the v4l2_subdev pointer */
+	if (!try_module_get(client->driver->driver.owner))
+		goto error;
+	sd = i2c_get_clientdata(client);
+
+	/* Register with the v4l2_device which increases the module's
+	   use count as well. */
+	if (v4l2_device_register_subdev(v4l2_dev, sd))
+		sd = NULL;
+	/* Decrease the module use count to match the first try_module_get. */
+	module_put(client->driver->driver.owner);
+
+	if (sd) {
+		/* We return errors from v4l2_subdev_call only if we have the
+		   callback as the .s_config is not mandatory */
+		int err = v4l2_subdev_call(sd, core, s_config,
+				info->irq, info->platform_data);
+
+		if (err && err != -ENOIOCTLCMD) {
+			v4l2_device_unregister_subdev(sd);
+			sd = NULL;
+		}
+	}
+
+error:
+	/* If we have a client but no subdev, then something went wrong and
+	   we must unregister the client. */
+	if (client && sd == NULL)
+		i2c_unregister_device(client);
+	return sd;
+}
+EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_board);
+
+struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev,
+		struct i2c_adapter *adapter,
+		const char *module_name, const char *client_type,
+		int irq, void *platform_data,
+		u8 addr, const unsigned short *probe_addrs)
+{
+	struct i2c_board_info info;
+
+	/* Setup the i2c board info with the device type and
+	   the device address. */
+	memset(&info, 0, sizeof(info));
+	strlcpy(info.type, client_type, sizeof(info.type));
+	info.addr = addr;
+	info.irq = irq;
+	info.platform_data = platform_data;
+
+	return v4l2_i2c_new_subdev_board(v4l2_dev, adapter, module_name,
+			&info, probe_addrs);
+}
+EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_cfg);
+
 /* Return i2c client address of v4l2_subdev. */
 unsigned short v4l2_i2c_subdev_addr(struct v4l2_subdev *sd)
 {
@@ -916,4 +1021,78 @@ const unsigned short *v4l2_i2c_tuner_addrs(enum v4l2_i2c_tuner_type type)
 }
 EXPORT_SYMBOL_GPL(v4l2_i2c_tuner_addrs);
 
-#endif
+#endif /* defined(CONFIG_I2C) */
+
+/* Clamp x to be between min and max, aligned to a multiple of 2^align.  min
+ * and max don't have to be aligned, but there must be at least one valid
+ * value.  E.g., min=17,max=31,align=4 is not allowed as there are no multiples
+ * of 16 between 17 and 31.  */
+static unsigned int clamp_align(unsigned int x, unsigned int min,
+				unsigned int max, unsigned int align)
+{
+	/* Bits that must be zero to be aligned */
+	unsigned int mask = ~((1 << align) - 1);
+
+	/* Round to nearest aligned value */
+	if (align)
+		x = (x + (1 << (align - 1))) & mask;
+
+	/* Clamp to aligned value of min and max */
+	if (x < min)
+		x = (min + ~mask) & mask;
+	else if (x > max)
+		x = max & mask;
+
+	return x;
+}
+
+/* Bound an image to have a width between wmin and wmax, and height between
+ * hmin and hmax, inclusive.  Additionally, the width will be a multiple of
+ * 2^walign, the height will be a multiple of 2^halign, and the overall size
+ * (width*height) will be a multiple of 2^salign.  The image may be shrunk
+ * or enlarged to fit the alignment constraints.
+ *
+ * The width or height maximum must not be smaller than the corresponding
+ * minimum.  The alignments must not be so high there are no possible image
+ * sizes within the allowed bounds.  wmin and hmin must be at least 1
+ * (don't use 0).  If you don't care about a certain alignment, specify 0,
+ * as 2^0 is 1 and one byte alignment is equivalent to no alignment.  If
+ * you only want to adjust downward, specify a maximum that's the same as
+ * the initial value.
+ */
+void v4l_bound_align_image(u32 *w, unsigned int wmin, unsigned int wmax,
+			   unsigned int walign,
+			   u32 *h, unsigned int hmin, unsigned int hmax,
+			   unsigned int halign, unsigned int salign)
+{
+	*w = clamp_align(*w, wmin, wmax, walign);
+	*h = clamp_align(*h, hmin, hmax, halign);
+
+	/* Usually we don't need to align the size and are done now. */
+	if (!salign)
+		return;
+
+	/* How much alignment do we have? */
+	walign = __ffs(*w);
+	halign = __ffs(*h);
+	/* Enough to satisfy the image alignment? */
+	if (walign + halign < salign) {
+		/* Max walign where there is still a valid width */
+		unsigned int wmaxa = __fls(wmax ^ (wmin - 1));
+		/* Max halign where there is still a valid height */
+		unsigned int hmaxa = __fls(hmax ^ (hmin - 1));
+
+		/* up the smaller alignment until we have enough */
+		do {
+			if (halign >= hmaxa ||
+			    (walign <= halign && walign < wmaxa)) {
+				*w = clamp_align(*w, wmin, wmax, walign + 1);
+				walign = __ffs(*w);
+			} else {
+				*h = clamp_align(*h, hmin, hmax, halign + 1);
+				halign = __ffs(*h);
+			}
+		} while (halign + walign < salign);
+	}
+}
+EXPORT_SYMBOL_GPL(v4l_bound_align_image);
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index fbfefae7886..cd726685846 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -883,15 +883,8 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 	maxh  = norm_maxh();
 
 	f->fmt.pix.field = field;
-	if (f->fmt.pix.height < 32)
-		f->fmt.pix.height = 32;
-	if (f->fmt.pix.height > maxh)
-		f->fmt.pix.height = maxh;
-	if (f->fmt.pix.width < 48)
-		f->fmt.pix.width = 48;
-	if (f->fmt.pix.width > maxw)
-		f->fmt.pix.width = maxw;
-	f->fmt.pix.width &= ~0x03;
+	v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2,
+			      &f->fmt.pix.height, 32, maxh, 0, 0);
 	f->fmt.pix.bytesperline =
 		(f->fmt.pix.width * fmt->depth) >> 3;
 	f->fmt.pix.sizeimage =
diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c
index f59b2bd07e8..6c3f23e31b5 100644
--- a/drivers/media/video/w9968cf.c
+++ b/drivers/media/video/w9968cf.c
@@ -460,7 +460,7 @@ static int w9968cf_set_picture(struct w9968cf_device*, struct video_picture);
 static int w9968cf_set_window(struct w9968cf_device*, struct video_window);
 static int w9968cf_postprocess_frame(struct w9968cf_device*,
 				     struct w9968cf_frame_t*);
-static int w9968cf_adjust_window_size(struct w9968cf_device*, u16* w, u16* h);
+static int w9968cf_adjust_window_size(struct w9968cf_device*, u32 *w, u32 *h);
 static void w9968cf_init_framelist(struct w9968cf_device*);
 static void w9968cf_push_frame(struct w9968cf_device*, u8 f_num);
 static void w9968cf_pop_frame(struct w9968cf_device*,struct w9968cf_frame_t**);
@@ -1763,8 +1763,7 @@ w9968cf_set_window(struct w9968cf_device* cam, struct video_window win)
 	#define UNSC(x) ((x) >> 10)
 
 	/* Make sure we are using a supported resolution */
-	if ((err = w9968cf_adjust_window_size(cam, (u16*)&win.width,
-					      (u16*)&win.height)))
+	if ((err = w9968cf_adjust_window_size(cam, &win.width, &win.height)))
 		goto error;
 
 	/* Scaling factors */
@@ -1914,12 +1913,9 @@ error:
   Return 0 on success, -1 otherwise.
   --------------------------------------------------------------------------*/
 static int
-w9968cf_adjust_window_size(struct w9968cf_device* cam, u16* width, u16* height)
+w9968cf_adjust_window_size(struct w9968cf_device *cam, u32 *width, u32 *height)
 {
-	u16 maxw, maxh;
-
-	if ((*width < cam->minwidth) || (*height < cam->minheight))
-		return -ERANGE;
+	unsigned int maxw, maxh, align;
 
 	maxw = cam->upscaling && !(cam->vpp_flag & VPP_DECOMPRESSION) &&
 	       w9968cf_vpp ? max((u16)W9968CF_MAX_WIDTH, cam->maxwidth)
@@ -1927,16 +1923,10 @@ w9968cf_adjust_window_size(struct w9968cf_device* cam, u16* width, u16* height)
 	maxh = cam->upscaling && !(cam->vpp_flag & VPP_DECOMPRESSION) &&
 	       w9968cf_vpp ? max((u16)W9968CF_MAX_HEIGHT, cam->maxheight)
 			   : cam->maxheight;
+	align = (cam->vpp_flag & VPP_DECOMPRESSION) ? 4 : 0;
 
-	if (*width > maxw)
-		*width = maxw;
-	if (*height > maxh)
-		*height = maxh;
-
-	if (cam->vpp_flag & VPP_DECOMPRESSION) {
-		*width  &= ~15L; /* multiple of 16 */
-		*height &= ~15L;
-	}
+	v4l_bound_align_image(width, cam->minwidth, maxw, align,
+			      height, cam->minheight, maxh, align, 0);
 
 	PDBGG("Window size adjusted w=%u, h=%u ", *width, *height)
 
@@ -3043,8 +3033,8 @@ static long w9968cf_v4l_ioctl(struct file *filp,
 		if (win.clipcount != 0 || win.flags != 0)
 			return -EINVAL;
 
-		if ((err = w9968cf_adjust_window_size(cam, (u16*)&win.width,
-						      (u16*)&win.height))) {
+		if ((err = w9968cf_adjust_window_size(cam, &win.width,
+						      &win.height))) {
 			DBG(4, "Resolution not supported (%ux%u). "
 			       "VIDIOCSWIN failed", win.width, win.height)
 			return err;
@@ -3116,6 +3106,7 @@ static long w9968cf_v4l_ioctl(struct file *filp,
 	{
 		struct video_mmap mmap;
 		struct w9968cf_frame_t* fr;
+		u32 w, h;
 		int err = 0;
 
 		if (copy_from_user(&mmap, arg, sizeof(mmap)))
@@ -3164,8 +3155,10 @@ static long w9968cf_v4l_ioctl(struct file *filp,
 		   }
 		}
 
-		if ((err = w9968cf_adjust_window_size(cam, (u16*)&mmap.width,
-						      (u16*)&mmap.height))) {
+		w = mmap.width; h = mmap.height;
+		err = w9968cf_adjust_window_size(cam, &w, &h);
+		mmap.width = w; mmap.height = h;
+		if (err) {
 			DBG(4, "Resolution not supported (%dx%d). "
 			       "VIDIOCMCAPTURE failed",
 			    mmap.width, mmap.height)
diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index 643cccaa1aa..3d7df32a3d8 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -2088,16 +2088,10 @@ static int zoran_try_fmt_vid_cap(struct file *file, void *__fh,
 		return -EINVAL;
 	}
 
-	bpp = (zoran_formats[i].depth + 7) / 8;
-	fmt->fmt.pix.width &= ~((bpp == 2) ? 1 : 3);
-	if (fmt->fmt.pix.width > BUZ_MAX_WIDTH)
-		fmt->fmt.pix.width = BUZ_MAX_WIDTH;
-	if (fmt->fmt.pix.width < BUZ_MIN_WIDTH)
-		fmt->fmt.pix.width = BUZ_MIN_WIDTH;
-	if (fmt->fmt.pix.height > BUZ_MAX_HEIGHT)
-		fmt->fmt.pix.height = BUZ_MAX_HEIGHT;
-	if (fmt->fmt.pix.height < BUZ_MIN_HEIGHT)
-		fmt->fmt.pix.height = BUZ_MIN_HEIGHT;
+	bpp = DIV_ROUND_UP(zoran_formats[i].depth, 8);
+	v4l_bound_align_image(
+		&fmt->fmt.pix.width, BUZ_MIN_WIDTH, BUZ_MAX_WIDTH, bpp == 2 ? 1 : 2,
+		&fmt->fmt.pix.height, BUZ_MIN_HEIGHT, BUZ_MAX_HEIGHT, 0, 0);
 	mutex_unlock(&zr->resource_lock);
 
 	return 0;
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 0df065275cd..5d0ba4f5924 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -4414,11 +4414,11 @@ PrimeIocFifos(MPT_ADAPTER *ioc)
 		 * 1078 errata workaround for the 36GB limitation
 		 */
 		if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078 &&
-		    ioc->dma_mask > DMA_35BIT_MASK) {
+		    ioc->dma_mask > DMA_BIT_MASK(35)) {
 			if (!pci_set_dma_mask(ioc->pcidev, DMA_BIT_MASK(32))
 			    && !pci_set_consistent_dma_mask(ioc->pcidev,
 			    DMA_BIT_MASK(32))) {
-				dma_mask = DMA_35BIT_MASK;
+				dma_mask = DMA_BIT_MASK(35);
 				d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 				    "setting 35 bit addressing for "
 				    "Request/Reply/Chain and Sense Buffers\n",
@@ -4575,7 +4575,7 @@ PrimeIocFifos(MPT_ADAPTER *ioc)
 		alloc_dma += ioc->reply_sz;
 	}
 
-	if (dma_mask == DMA_35BIT_MASK && !pci_set_dma_mask(ioc->pcidev,
+	if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev,
 	    ioc->dma_mask) && !pci_set_consistent_dma_mask(ioc->pcidev,
 	    ioc->dma_mask))
 		d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
@@ -4602,7 +4602,7 @@ out_fail:
 		ioc->sense_buf_pool = NULL;
 	}
 
-	if (dma_mask == DMA_35BIT_MASK && !pci_set_dma_mask(ioc->pcidev,
+	if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev,
 	    DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(ioc->pcidev,
 	    DMA_BIT_MASK(64)))
 		d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 20e0b447e8e..55ff25244af 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -3518,7 +3518,7 @@ retry_page:
 		} else
 			mptsas_volume_delete(ioc, sas_info->fw.id);
 	}
-	mutex_lock(&ioc->sas_device_info_mutex);
+	mutex_unlock(&ioc->sas_device_info_mutex);
 
 	/* expanders */
 	mutex_lock(&ioc->sas_topology_mutex);
@@ -3549,7 +3549,7 @@ retry_page:
 			goto redo_expander_scan;
 		}
 	}
-	mutex_lock(&ioc->sas_topology_mutex);
+	mutex_unlock(&ioc->sas_topology_mutex);
 }
 
 /**
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index ee3927ab11e..491ac0f800d 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -30,6 +30,7 @@ config MFD_SM501_GPIO
 config MFD_ASIC3
 	bool "Support for Compaq ASIC3"
 	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
+	select MFD_CORE
 	 ---help---
 	  This driver supports the ASIC3 multifunction chip found on many
 	  PDAs (mainly iPAQ and HTC based ones)
@@ -152,7 +153,7 @@ config MFD_WM8400
 	depends on I2C
 	help
 	  Support for the Wolfson Microelecronics WM8400 PMIC and audio
-	  CODEC.  This driver adds provides common support for accessing
+	  CODEC.  This driver provides common support for accessing
 	  the device, additional drivers must be enabled in order to use
 	  the functionality of the device.
 
@@ -241,6 +242,27 @@ config PCF50633_GPIO
 	 Say yes here if you want to include support GPIO for pins on
 	 the PCF50633 chip.
 
+config AB3100_CORE
+	tristate "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
+	depends on I2C
+	default y if ARCH_U300
+	help
+	  Select this to enable the AB3100 Mixed Signal IC core
+	  functionality. This connects to a AB3100 on the I2C bus
+	  and expose a number of symbols needed for dependent devices
+	  to read and write registers and subscribe to events from
+	  this multi-functional IC. This is needed to use other features
+	  of the AB3100 such as battery-backed RTC, charging control,
+	  LEDs, vibrator, system power and temperature, power management
+	  and ALSA sound.
+
+config EZX_PCAP
+	bool "PCAP Support"
+	depends on GENERIC_HARDIRQS && SPI_MASTER
+	help
+	  This enables the PCAP ASIC present on EZX Phones. This is
+	  needed for MMC, TouchScreen, Sound, USB, etc..
+
 endmenu
 
 menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 3afb5192e4d..6f8a9a1af20 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -26,6 +26,8 @@ obj-$(CONFIG_TWL4030_CORE)	+= twl4030-core.o twl4030-irq.o
 
 obj-$(CONFIG_MFD_CORE)		+= mfd-core.o
 
+obj-$(CONFIG_EZX_PCAP)		+= ezx-pcap.o
+
 obj-$(CONFIG_MCP)		+= mcp-core.o
 obj-$(CONFIG_MCP_SA11X0)	+= mcp-sa11x0.o
 obj-$(CONFIG_MCP_UCB1200)	+= ucb1x00-core.o
@@ -40,4 +42,5 @@ obj-$(CONFIG_PMIC_DA903X)	+= da903x.o
 
 obj-$(CONFIG_MFD_PCF50633)	+= pcf50633-core.o
 obj-$(CONFIG_PCF50633_ADC)	+= pcf50633-adc.o
-obj-$(CONFIG_PCF50633_GPIO)	+= pcf50633-gpio.o
\ No newline at end of file
+obj-$(CONFIG_PCF50633_GPIO)	+= pcf50633-gpio.o
+obj-$(CONFIG_AB3100_CORE)	+= ab3100-core.o
diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c
new file mode 100644
index 00000000000..13e7d7bfe85
--- /dev/null
+++ b/drivers/mfd/ab3100-core.c
@@ -0,0 +1,991 @@
+/*
+ * Copyright (C) 2007-2009 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Low-level core for exclusive access to the AB3100 IC on the I2C bus
+ * and some basic chip-configuration.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/list.h>
+#include <linux/notifier.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>
+#include <linux/mfd/ab3100.h>
+
+/* These are the only registers inside AB3100 used in this main file */
+
+/* Interrupt event registers */
+#define AB3100_EVENTA1		0x21
+#define AB3100_EVENTA2		0x22
+#define AB3100_EVENTA3		0x23
+
+/* AB3100 DAC converter registers */
+#define AB3100_DIS		0x00
+#define AB3100_D0C		0x01
+#define AB3100_D1C		0x02
+#define AB3100_D2C		0x03
+#define AB3100_D3C		0x04
+
+/* Chip ID register */
+#define AB3100_CID		0x20
+
+/* AB3100 interrupt registers */
+#define AB3100_IMRA1		0x24
+#define AB3100_IMRA2		0x25
+#define AB3100_IMRA3		0x26
+#define AB3100_IMRB1		0x2B
+#define AB3100_IMRB2		0x2C
+#define AB3100_IMRB3		0x2D
+
+/* System Power Monitoring and control registers */
+#define AB3100_MCA		0x2E
+#define AB3100_MCB		0x2F
+
+/* SIM power up */
+#define AB3100_SUP		0x50
+
+/*
+ * I2C communication
+ *
+ * The AB3100 is usually assigned address 0x48 (7-bit)
+ * The chip is defined in the platform i2c_board_data section.
+ */
+static unsigned short normal_i2c[] = { 0x48, I2C_CLIENT_END };
+I2C_CLIENT_INSMOD_1(ab3100);
+
+u8 ab3100_get_chip_type(struct ab3100 *ab3100)
+{
+	u8 chip = ABUNKNOWN;
+
+	switch (ab3100->chip_id & 0xf0) {
+	case  0xa0:
+		chip = AB3000;
+		break;
+	case  0xc0:
+		chip = AB3100;
+		break;
+	}
+	return chip;
+}
+EXPORT_SYMBOL(ab3100_get_chip_type);
+
+int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval)
+{
+	u8 regandval[2] = {reg, regval};
+	int err;
+
+	err = mutex_lock_interruptible(&ab3100->access_mutex);
+	if (err)
+		return err;
+
+	/*
+	 * A two-byte write message with the first byte containing the register
+	 * number and the second byte containing the value to be written
+	 * effectively sets a register in the AB3100.
+	 */
+	err = i2c_master_send(ab3100->i2c_client, regandval, 2);
+	if (err < 0) {
+		dev_err(ab3100->dev,
+			"write error (write register): %d\n",
+			err);
+	} else if (err != 2) {
+		dev_err(ab3100->dev,
+			"write error (write register) "
+			"%d bytes transferred (expected 2)\n",
+			err);
+		err = -EIO;
+	} else {
+		/* All is well */
+		err = 0;
+	}
+	mutex_unlock(&ab3100->access_mutex);
+	return 0;
+}
+EXPORT_SYMBOL(ab3100_set_register);
+
+/*
+ * The test registers exist at an I2C bus address up one
+ * from the ordinary base. They are not supposed to be used
+ * in production code, but sometimes you have to do that
+ * anyway. It's currently only used from this file so declare
+ * it static and do not export.
+ */
+static int ab3100_set_test_register(struct ab3100 *ab3100,
+				    u8 reg, u8 regval)
+{
+	u8 regandval[2] = {reg, regval};
+	int err;
+
+	err = mutex_lock_interruptible(&ab3100->access_mutex);
+	if (err)
+		return err;
+
+	err = i2c_master_send(ab3100->testreg_client, regandval, 2);
+	if (err < 0) {
+		dev_err(ab3100->dev,
+			"write error (write test register): %d\n",
+			err);
+	} else if (err != 2) {
+		dev_err(ab3100->dev,
+			"write error (write test register) "
+			"%d bytes transferred (expected 2)\n",
+			err);
+		err = -EIO;
+	} else {
+		/* All is well */
+		err = 0;
+	}
+	mutex_unlock(&ab3100->access_mutex);
+
+	return err;
+}
+
+int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval)
+{
+	int err;
+
+	err = mutex_lock_interruptible(&ab3100->access_mutex);
+	if (err)
+		return err;
+
+	/*
+	 * AB3100 require an I2C "stop" command between each message, else
+	 * it will not work. The only way of achieveing this with the
+	 * message transport layer is to send the read and write messages
+	 * separately.
+	 */
+	err = i2c_master_send(ab3100->i2c_client, &reg, 1);
+	if (err < 0) {
+		dev_err(ab3100->dev,
+			"write error (send register address): %d\n",
+			err);
+		goto get_reg_out_unlock;
+	} else if (err != 1) {
+		dev_err(ab3100->dev,
+			"write error (send register address) "
+			"%d bytes transferred (expected 1)\n",
+			err);
+		err = -EIO;
+		goto get_reg_out_unlock;
+	} else {
+		/* All is well */
+		err = 0;
+	}
+
+	err = i2c_master_recv(ab3100->i2c_client, regval, 1);
+	if (err < 0) {
+		dev_err(ab3100->dev,
+			"write error (read register): %d\n",
+			err);
+		goto get_reg_out_unlock;
+	} else if (err != 1) {
+		dev_err(ab3100->dev,
+			"write error (read register) "
+			"%d bytes transferred (expected 1)\n",
+			err);
+		err = -EIO;
+		goto get_reg_out_unlock;
+	} else {
+		/* All is well */
+		err = 0;
+	}
+
+ get_reg_out_unlock:
+	mutex_unlock(&ab3100->access_mutex);
+	return err;
+}
+EXPORT_SYMBOL(ab3100_get_register);
+
+int ab3100_get_register_page(struct ab3100 *ab3100,
+			     u8 first_reg, u8 *regvals, u8 numregs)
+{
+	int err;
+
+	if (ab3100->chip_id == 0xa0 ||
+	    ab3100->chip_id == 0xa1)
+		/* These don't support paged reads */
+		return -EIO;
+
+	err = mutex_lock_interruptible(&ab3100->access_mutex);
+	if (err)
+		return err;
+
+	/*
+	 * Paged read also require an I2C "stop" command.
+	 */
+	err = i2c_master_send(ab3100->i2c_client, &first_reg, 1);
+	if (err < 0) {
+		dev_err(ab3100->dev,
+			"write error (send first register address): %d\n",
+			err);
+		goto get_reg_page_out_unlock;
+	} else if (err != 1) {
+		dev_err(ab3100->dev,
+			"write error (send first register address) "
+			"%d bytes transferred (expected 1)\n",
+			err);
+		err = -EIO;
+		goto get_reg_page_out_unlock;
+	}
+
+	err = i2c_master_recv(ab3100->i2c_client, regvals, numregs);
+	if (err < 0) {
+		dev_err(ab3100->dev,
+			"write error (read register page): %d\n",
+			err);
+		goto get_reg_page_out_unlock;
+	} else if (err != numregs) {
+		dev_err(ab3100->dev,
+			"write error (read register page) "
+			"%d bytes transferred (expected %d)\n",
+			err, numregs);
+		err = -EIO;
+		goto get_reg_page_out_unlock;
+	}
+
+	/* All is well */
+	err = 0;
+
+ get_reg_page_out_unlock:
+	mutex_unlock(&ab3100->access_mutex);
+	return err;
+}
+EXPORT_SYMBOL(ab3100_get_register_page);
+
+int ab3100_mask_and_set_register(struct ab3100 *ab3100,
+				 u8 reg, u8 andmask, u8 ormask)
+{
+	u8 regandval[2] = {reg, 0};
+	int err;
+
+	err = mutex_lock_interruptible(&ab3100->access_mutex);
+	if (err)
+		return err;
+
+	/* First read out the target register */
+	err = i2c_master_send(ab3100->i2c_client, &reg, 1);
+	if (err < 0) {
+		dev_err(ab3100->dev,
+			"write error (maskset send address): %d\n",
+			err);
+		goto get_maskset_unlock;
+	} else if (err != 1) {
+		dev_err(ab3100->dev,
+			"write error (maskset send address) "
+			"%d bytes transferred (expected 1)\n",
+			err);
+		err = -EIO;
+		goto get_maskset_unlock;
+	}
+
+	err = i2c_master_recv(ab3100->i2c_client, &regandval[1], 1);
+	if (err < 0) {
+		dev_err(ab3100->dev,
+			"write error (maskset read register): %d\n",
+			err);
+		goto get_maskset_unlock;
+	} else if (err != 1) {
+		dev_err(ab3100->dev,
+			"write error (maskset read register) "
+			"%d bytes transferred (expected 1)\n",
+			err);
+		err = -EIO;
+		goto get_maskset_unlock;
+	}
+
+	/* Modify the register */
+	regandval[1] &= andmask;
+	regandval[1] |= ormask;
+
+	/* Write the register */
+	err = i2c_master_send(ab3100->i2c_client, regandval, 2);
+	if (err < 0) {
+		dev_err(ab3100->dev,
+			"write error (write register): %d\n",
+			err);
+		goto get_maskset_unlock;
+	} else if (err != 2) {
+		dev_err(ab3100->dev,
+			"write error (write register) "
+			"%d bytes transferred (expected 2)\n",
+			err);
+		err = -EIO;
+		goto get_maskset_unlock;
+	}
+
+	/* All is well */
+	err = 0;
+
+ get_maskset_unlock:
+	mutex_unlock(&ab3100->access_mutex);
+	return err;
+}
+EXPORT_SYMBOL(ab3100_mask_and_set_register);
+
+/*
+ * Register a simple callback for handling any AB3100 events.
+ */
+int ab3100_event_register(struct ab3100 *ab3100,
+			  struct notifier_block *nb)
+{
+	return blocking_notifier_chain_register(&ab3100->event_subscribers,
+					       nb);
+}
+EXPORT_SYMBOL(ab3100_event_register);
+
+/*
+ * Remove a previously registered callback.
+ */
+int ab3100_event_unregister(struct ab3100 *ab3100,
+			    struct notifier_block *nb)
+{
+  return blocking_notifier_chain_unregister(&ab3100->event_subscribers,
+					    nb);
+}
+EXPORT_SYMBOL(ab3100_event_unregister);
+
+
+int ab3100_event_registers_startup_state_get(struct ab3100 *ab3100,
+					     u32 *fatevent)
+{
+	if (!ab3100->startup_events_read)
+		return -EAGAIN; /* Try again later */
+	*fatevent = ab3100->startup_events;
+	return 0;
+}
+EXPORT_SYMBOL(ab3100_event_registers_startup_state_get);
+
+/* Interrupt handling worker */
+static void ab3100_work(struct work_struct *work)
+{
+	struct ab3100 *ab3100 = container_of(work, struct ab3100, work);
+	u8 event_regs[3];
+	u32 fatevent;
+	int err;
+
+	err = ab3100_get_register_page(ab3100, AB3100_EVENTA1,
+				       event_regs, 3);
+	if (err)
+		goto err_event_wq;
+
+	fatevent = (event_regs[0] << 16) |
+		(event_regs[1] << 8) |
+		event_regs[2];
+
+	if (!ab3100->startup_events_read) {
+		ab3100->startup_events = fatevent;
+		ab3100->startup_events_read = true;
+	}
+	/*
+	 * The notified parties will have to mask out the events
+	 * they're interested in and react to them. They will be
+	 * notified on all events, then they use the fatevent value
+	 * to determine if they're interested.
+	 */
+	blocking_notifier_call_chain(&ab3100->event_subscribers,
+				     fatevent, NULL);
+
+	dev_dbg(ab3100->dev,
+		"IRQ Event: 0x%08x\n", fatevent);
+
+	/* By now the IRQ should be acked and deasserted so enable it again */
+	enable_irq(ab3100->i2c_client->irq);
+	return;
+
+ err_event_wq:
+	dev_dbg(ab3100->dev,
+		"error in event workqueue\n");
+	/* Enable the IRQ anyway, what choice do we have? */
+	enable_irq(ab3100->i2c_client->irq);
+	return;
+}
+
+static irqreturn_t ab3100_irq_handler(int irq, void *data)
+{
+	struct ab3100 *ab3100 = data;
+	/*
+	 * Disable the IRQ and dispatch a worker to handle the
+	 * event. Since the chip resides on I2C this is slow
+	 * stuff and we will re-enable the interrupts once th
+	 * worker has finished.
+	 */
+	disable_irq(ab3100->i2c_client->irq);
+	schedule_work(&ab3100->work);
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_DEBUG_FS
+/*
+ * Some debugfs entries only exposed if we're using debug
+ */
+static int ab3100_registers_print(struct seq_file *s, void *p)
+{
+	struct ab3100 *ab3100 = s->private;
+	u8 value;
+	u8 reg;
+
+	seq_printf(s, "AB3100 registers:\n");
+
+	for (reg = 0; reg < 0xff; reg++) {
+		ab3100_get_register(ab3100, reg, &value);
+		seq_printf(s, "[0x%x]:  0x%x\n", reg, value);
+	}
+	return 0;
+}
+
+static int ab3100_registers_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab3100_registers_print, inode->i_private);
+}
+
+static const struct file_operations ab3100_registers_fops = {
+	.open = ab3100_registers_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+struct ab3100_get_set_reg_priv {
+	struct ab3100 *ab3100;
+	bool mode;
+};
+
+static int ab3100_get_set_reg_open_file(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return 0;
+}
+
+static int ab3100_get_set_reg(struct file *file,
+			      const char __user *user_buf,
+			      size_t count, loff_t *ppos)
+{
+	struct ab3100_get_set_reg_priv *priv = file->private_data;
+	struct ab3100 *ab3100 = priv->ab3100;
+	char buf[32];
+	int buf_size;
+	int regp;
+	unsigned long user_reg;
+	int err;
+	int i = 0;
+
+	/* Get userspace string and assure termination */
+	buf_size = min(count, (sizeof(buf)-1));
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	buf[buf_size] = 0;
+
+	/*
+	 * The idea is here to parse a string which is either
+	 * "0xnn" for reading a register, or "0xaa 0xbb" for
+	 * writing 0xbb to the register 0xaa. First move past
+	 * whitespace and then begin to parse the register.
+	 */
+	while ((i < buf_size) && (buf[i] == ' '))
+		i++;
+	regp = i;
+
+	/*
+	 * Advance pointer to end of string then terminate
+	 * the register string. This is needed to satisfy
+	 * the strict_strtoul() function.
+	 */
+	while ((i < buf_size) && (buf[i] != ' '))
+		i++;
+	buf[i] = '\0';
+
+	err = strict_strtoul(&buf[regp], 16, &user_reg);
+	if (err)
+		return err;
+	if (user_reg > 0xff)
+		return -EINVAL;
+
+	/* Either we read or we write a register here */
+	if (!priv->mode) {
+		/* Reading */
+		u8 reg = (u8) user_reg;
+		u8 regvalue;
+
+		ab3100_get_register(ab3100, reg, &regvalue);
+
+		dev_info(ab3100->dev,
+			 "debug read AB3100 reg[0x%02x]: 0x%02x\n",
+			 reg, regvalue);
+	} else {
+		int valp;
+		unsigned long user_value;
+		u8 reg = (u8) user_reg;
+		u8 value;
+		u8 regvalue;
+
+		/*
+		 * Writing, we need some value to write to
+		 * the register so keep parsing the string
+		 * from userspace.
+		 */
+		i++;
+		while ((i < buf_size) && (buf[i] == ' '))
+			i++;
+		valp = i;
+		while ((i < buf_size) && (buf[i] != ' '))
+			i++;
+		buf[i] = '\0';
+
+		err = strict_strtoul(&buf[valp], 16, &user_value);
+		if (err)
+			return err;
+		if (user_reg > 0xff)
+			return -EINVAL;
+
+		value = (u8) user_value;
+		ab3100_set_register(ab3100, reg, value);
+		ab3100_get_register(ab3100, reg, &regvalue);
+
+		dev_info(ab3100->dev,
+			 "debug write reg[0x%02x] with 0x%02x, "
+			 "after readback: 0x%02x\n",
+			 reg, value, regvalue);
+	}
+	return buf_size;
+}
+
+static const struct file_operations ab3100_get_set_reg_fops = {
+	.open = ab3100_get_set_reg_open_file,
+	.write = ab3100_get_set_reg,
+};
+
+static struct dentry *ab3100_dir;
+static struct dentry *ab3100_reg_file;
+static struct ab3100_get_set_reg_priv ab3100_get_priv;
+static struct dentry *ab3100_get_reg_file;
+static struct ab3100_get_set_reg_priv ab3100_set_priv;
+static struct dentry *ab3100_set_reg_file;
+
+static void ab3100_setup_debugfs(struct ab3100 *ab3100)
+{
+	int err;
+
+	ab3100_dir = debugfs_create_dir("ab3100", NULL);
+	if (!ab3100_dir)
+		goto exit_no_debugfs;
+
+	ab3100_reg_file = debugfs_create_file("registers",
+				S_IRUGO, ab3100_dir, ab3100,
+				&ab3100_registers_fops);
+	if (!ab3100_reg_file) {
+		err = -ENOMEM;
+		goto exit_destroy_dir;
+	}
+
+	ab3100_get_priv.ab3100 = ab3100;
+	ab3100_get_priv.mode = false;
+	ab3100_get_reg_file = debugfs_create_file("get_reg",
+				S_IWUGO, ab3100_dir, &ab3100_get_priv,
+				&ab3100_get_set_reg_fops);
+	if (!ab3100_get_reg_file) {
+		err = -ENOMEM;
+		goto exit_destroy_reg;
+	}
+
+	ab3100_set_priv.ab3100 = ab3100;
+	ab3100_set_priv.mode = true;
+	ab3100_set_reg_file = debugfs_create_file("set_reg",
+				S_IWUGO, ab3100_dir, &ab3100_set_priv,
+				&ab3100_get_set_reg_fops);
+	if (!ab3100_set_reg_file) {
+		err = -ENOMEM;
+		goto exit_destroy_get_reg;
+	}
+	return;
+
+ exit_destroy_get_reg:
+	debugfs_remove(ab3100_get_reg_file);
+ exit_destroy_reg:
+	debugfs_remove(ab3100_reg_file);
+ exit_destroy_dir:
+	debugfs_remove(ab3100_dir);
+ exit_no_debugfs:
+	return;
+}
+static inline void ab3100_remove_debugfs(void)
+{
+	debugfs_remove(ab3100_set_reg_file);
+	debugfs_remove(ab3100_get_reg_file);
+	debugfs_remove(ab3100_reg_file);
+	debugfs_remove(ab3100_dir);
+}
+#else
+static inline void ab3100_setup_debugfs(struct ab3100 *ab3100)
+{
+}
+static inline void ab3100_remove_debugfs(void)
+{
+}
+#endif
+
+/*
+ * Basic set-up, datastructure creation/destruction and I2C interface.
+ * This sets up a default config in the AB3100 chip so that it
+ * will work as expected.
+ */
+
+struct ab3100_init_setting {
+	u8 abreg;
+	u8 setting;
+};
+
+static const struct ab3100_init_setting __initdata
+ab3100_init_settings[] = {
+	{
+		.abreg = AB3100_MCA,
+		.setting = 0x01
+	}, {
+		.abreg = AB3100_MCB,
+		.setting = 0x30
+	}, {
+		.abreg = AB3100_IMRA1,
+		.setting = 0x00
+	}, {
+		.abreg = AB3100_IMRA2,
+		.setting = 0xFF
+	}, {
+		.abreg = AB3100_IMRA3,
+		.setting = 0x01
+	}, {
+		.abreg = AB3100_IMRB1,
+		.setting = 0xFF
+	}, {
+		.abreg = AB3100_IMRB2,
+		.setting = 0xFF
+	}, {
+		.abreg = AB3100_IMRB3,
+		.setting = 0xFF
+	}, {
+		.abreg = AB3100_SUP,
+		.setting = 0x00
+	}, {
+		.abreg = AB3100_DIS,
+		.setting = 0xF0
+	}, {
+		.abreg = AB3100_D0C,
+		.setting = 0x00
+	}, {
+		.abreg = AB3100_D1C,
+		.setting = 0x00
+	}, {
+		.abreg = AB3100_D2C,
+		.setting = 0x00
+	}, {
+		.abreg = AB3100_D3C,
+		.setting = 0x00
+	},
+};
+
+static int __init ab3100_setup(struct ab3100 *ab3100)
+{
+	int err = 0;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ab3100_init_settings); i++) {
+		err = ab3100_set_register(ab3100,
+					  ab3100_init_settings[i].abreg,
+					  ab3100_init_settings[i].setting);
+		if (err)
+			goto exit_no_setup;
+	}
+
+	/*
+	 * Special trick to make the AB3100 use the 32kHz clock (RTC)
+	 * bit 3 in test registe 0x02 is a special, undocumented test
+	 * register bit that only exist in AB3100 P1E
+	 */
+	if (ab3100->chip_id == 0xc4) {
+		dev_warn(ab3100->dev,
+			 "AB3100 P1E variant detected, "
+			 "forcing chip to 32KHz\n");
+		err = ab3100_set_test_register(ab3100, 0x02, 0x08);
+	}
+
+ exit_no_setup:
+	return err;
+}
+
+/*
+ * Here we define all the platform devices that appear
+ * as children of the AB3100. These are regular platform
+ * devices with the IORESOURCE_IO .start and .end set
+ * to correspond to the internal AB3100 register range
+ * mapping to the corresponding subdevice.
+ */
+
+#define AB3100_DEVICE(devname, devid)				\
+static struct platform_device ab3100_##devname##_device = {	\
+	.name		= devid,				\
+	.id		= -1,					\
+}
+
+/*
+ * This lists all the subdevices and corresponding register
+ * ranges.
+ */
+AB3100_DEVICE(dac, "ab3100-dac");
+AB3100_DEVICE(leds, "ab3100-leds");
+AB3100_DEVICE(power, "ab3100-power");
+AB3100_DEVICE(regulators, "ab3100-regulators");
+AB3100_DEVICE(sim, "ab3100-sim");
+AB3100_DEVICE(uart, "ab3100-uart");
+AB3100_DEVICE(rtc, "ab3100-rtc");
+AB3100_DEVICE(charger, "ab3100-charger");
+AB3100_DEVICE(boost, "ab3100-boost");
+AB3100_DEVICE(adc, "ab3100-adc");
+AB3100_DEVICE(fuelgauge, "ab3100-fuelgauge");
+AB3100_DEVICE(vibrator, "ab3100-vibrator");
+AB3100_DEVICE(otp, "ab3100-otp");
+AB3100_DEVICE(codec, "ab3100-codec");
+
+static struct platform_device *
+ab3100_platform_devs[] = {
+	&ab3100_dac_device,
+	&ab3100_leds_device,
+	&ab3100_power_device,
+	&ab3100_regulators_device,
+	&ab3100_sim_device,
+	&ab3100_uart_device,
+	&ab3100_rtc_device,
+	&ab3100_charger_device,
+	&ab3100_boost_device,
+	&ab3100_adc_device,
+	&ab3100_fuelgauge_device,
+	&ab3100_vibrator_device,
+	&ab3100_otp_device,
+	&ab3100_codec_device,
+};
+
+struct ab_family_id {
+	u8	id;
+	char	*name;
+};
+
+static const struct ab_family_id ids[] __initdata = {
+	/* AB3100 */
+	{
+		.id = 0xc0,
+		.name = "P1A"
+	}, {
+		.id = 0xc1,
+		.name = "P1B"
+	}, {
+		.id = 0xc2,
+		.name = "P1C"
+	}, {
+		.id = 0xc3,
+		.name = "P1D"
+	}, {
+		.id = 0xc4,
+		.name = "P1E"
+	}, {
+		.id = 0xc5,
+		.name = "P1F/R1A"
+	}, {
+		.id = 0xc6,
+		.name = "P1G/R1A"
+	}, {
+		.id = 0xc7,
+		.name = "P2A/R2A"
+	}, {
+		.id = 0xc8,
+		.name = "P2B/R2B"
+	},
+	/* AB3000 variants, not supported */
+	{
+		.id = 0xa0
+	}, {
+		.id = 0xa1
+	}, {
+		.id = 0xa2
+	}, {
+		.id = 0xa3
+	}, {
+		.id = 0xa4
+	}, {
+		.id = 0xa5
+	}, {
+		.id = 0xa6
+	}, {
+		.id = 0xa7
+	},
+	/* Terminator */
+	{
+		.id = 0x00,
+	},
+};
+
+static int __init ab3100_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct ab3100 *ab3100;
+	int err;
+	int i;
+
+	ab3100 = kzalloc(sizeof(struct ab3100), GFP_KERNEL);
+	if (!ab3100) {
+		dev_err(&client->dev, "could not allocate AB3100 device\n");
+		return -ENOMEM;
+	}
+
+	/* Initialize data structure */
+	mutex_init(&ab3100->access_mutex);
+	BLOCKING_INIT_NOTIFIER_HEAD(&ab3100->event_subscribers);
+
+	ab3100->i2c_client = client;
+	ab3100->dev = &ab3100->i2c_client->dev;
+
+	i2c_set_clientdata(client, ab3100);
+
+	/* Read chip ID register */
+	err = ab3100_get_register(ab3100, AB3100_CID,
+				  &ab3100->chip_id);
+	if (err) {
+		dev_err(&client->dev,
+			"could not communicate with the AB3100 analog "
+			"baseband chip\n");
+		goto exit_no_detect;
+	}
+
+	for (i = 0; ids[i].id != 0x0; i++) {
+		if (ids[i].id == ab3100->chip_id) {
+			if (ids[i].name != NULL) {
+				snprintf(&ab3100->chip_name[0],
+					 sizeof(ab3100->chip_name) - 1,
+					 "AB3100 %s",
+					 ids[i].name);
+				break;
+			} else {
+				dev_err(&client->dev,
+					"AB3000 is not supported\n");
+				goto exit_no_detect;
+			}
+		}
+	}
+
+	if (ids[i].id == 0x0) {
+		dev_err(&client->dev, "unknown analog baseband chip id: 0x%x\n",
+			ab3100->chip_id);
+		dev_err(&client->dev, "accepting it anyway. Please update "
+			"the driver.\n");
+		goto exit_no_detect;
+	}
+
+	dev_info(&client->dev, "Detected chip: %s\n",
+		 &ab3100->chip_name[0]);
+
+	/* Attach a second dummy i2c_client to the test register address */
+	ab3100->testreg_client = i2c_new_dummy(client->adapter,
+						     client->addr + 1);
+	if (!ab3100->testreg_client) {
+		err = -ENOMEM;
+		goto exit_no_testreg_client;
+	}
+
+	strlcpy(ab3100->testreg_client->name, id->name,
+		sizeof(ab3100->testreg_client->name));
+
+	err = ab3100_setup(ab3100);
+	if (err)
+		goto exit_no_setup;
+
+	INIT_WORK(&ab3100->work, ab3100_work);
+
+	/* This real unpredictable IRQ is of course sampled for entropy */
+	err = request_irq(client->irq, ab3100_irq_handler,
+			  IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
+			  "AB3100 IRQ", ab3100);
+	if (err)
+		goto exit_no_irq;
+
+	/* Set parent and a pointer back to the container in device data */
+	for (i = 0; i < ARRAY_SIZE(ab3100_platform_devs); i++) {
+		ab3100_platform_devs[i]->dev.parent =
+			&client->dev;
+		platform_set_drvdata(ab3100_platform_devs[i], ab3100);
+	}
+
+	/* Register the platform devices */
+	platform_add_devices(ab3100_platform_devs,
+			     ARRAY_SIZE(ab3100_platform_devs));
+
+	ab3100_setup_debugfs(ab3100);
+
+	return 0;
+
+ exit_no_irq:
+ exit_no_setup:
+	i2c_unregister_device(ab3100->testreg_client);
+ exit_no_testreg_client:
+ exit_no_detect:
+	kfree(ab3100);
+	return err;
+}
+
+static int __exit ab3100_remove(struct i2c_client *client)
+{
+	struct ab3100 *ab3100 = i2c_get_clientdata(client);
+	int i;
+
+	/* Unregister subdevices */
+	for (i = 0; i < ARRAY_SIZE(ab3100_platform_devs); i++)
+		platform_device_unregister(ab3100_platform_devs[i]);
+
+	ab3100_remove_debugfs();
+	i2c_unregister_device(ab3100->testreg_client);
+
+	/*
+	 * At this point, all subscribers should have unregistered
+	 * their notifiers so deactivate IRQ
+	 */
+	free_irq(client->irq, ab3100);
+	kfree(ab3100);
+	return 0;
+}
+
+static const struct i2c_device_id ab3100_id[] = {
+	{ "ab3100", ab3100 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ab3100_id);
+
+static struct i2c_driver ab3100_driver = {
+	.driver = {
+		.name	= "ab3100",
+		.owner	= THIS_MODULE,
+	},
+	.id_table	= ab3100_id,
+	.probe		= ab3100_probe,
+	.remove		= __exit_p(ab3100_remove),
+};
+
+static int __init ab3100_i2c_init(void)
+{
+	return i2c_add_driver(&ab3100_driver);
+}
+
+static void __exit ab3100_i2c_exit(void)
+{
+	i2c_del_driver(&ab3100_driver);
+}
+
+subsys_initcall(ab3100_i2c_init);
+module_exit(ab3100_i2c_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("AB3100 core driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index 9e485459f63..63a2a663210 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -17,6 +17,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/delay.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
 #include <linux/io.h>
@@ -24,6 +25,51 @@
 #include <linux/platform_device.h>
 
 #include <linux/mfd/asic3.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/ds1wm.h>
+#include <linux/mfd/tmio.h>
+
+enum {
+	ASIC3_CLOCK_SPI,
+	ASIC3_CLOCK_OWM,
+	ASIC3_CLOCK_PWM0,
+	ASIC3_CLOCK_PWM1,
+	ASIC3_CLOCK_LED0,
+	ASIC3_CLOCK_LED1,
+	ASIC3_CLOCK_LED2,
+	ASIC3_CLOCK_SD_HOST,
+	ASIC3_CLOCK_SD_BUS,
+	ASIC3_CLOCK_SMBUS,
+	ASIC3_CLOCK_EX0,
+	ASIC3_CLOCK_EX1,
+};
+
+struct asic3_clk {
+	int enabled;
+	unsigned int cdex;
+	unsigned long rate;
+};
+
+#define INIT_CDEX(_name, _rate)	\
+	[ASIC3_CLOCK_##_name] = {		\
+		.cdex = CLOCK_CDEX_##_name,	\
+		.rate = _rate,			\
+	}
+
+struct asic3_clk asic3_clk_init[] __initdata = {
+	INIT_CDEX(SPI, 0),
+	INIT_CDEX(OWM, 5000000),
+	INIT_CDEX(PWM0, 0),
+	INIT_CDEX(PWM1, 0),
+	INIT_CDEX(LED0, 0),
+	INIT_CDEX(LED1, 0),
+	INIT_CDEX(LED2, 0),
+	INIT_CDEX(SD_HOST, 24576000),
+	INIT_CDEX(SD_BUS, 12288000),
+	INIT_CDEX(SMBUS, 0),
+	INIT_CDEX(EX0, 32768),
+	INIT_CDEX(EX1, 24576000),
+};
 
 struct asic3 {
 	void __iomem *mapping;
@@ -34,6 +80,8 @@ struct asic3 {
 	u16 irq_bothedge[4];
 	struct gpio_chip gpio;
 	struct device *dev;
+
+	struct asic3_clk clocks[ARRAY_SIZE(asic3_clk_init)];
 };
 
 static int asic3_gpio_get(struct gpio_chip *chip, unsigned offset);
@@ -52,6 +100,21 @@ static inline u32 asic3_read_register(struct asic3 *asic,
 			(reg >> asic->bus_shift));
 }
 
+void asic3_set_register(struct asic3 *asic, u32 reg, u32 bits, bool set)
+{
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&asic->lock, flags);
+	val = asic3_read_register(asic, reg);
+	if (set)
+		val |= bits;
+	else
+		val &= ~bits;
+	asic3_write_register(asic, reg, val);
+	spin_unlock_irqrestore(&asic->lock, flags);
+}
+
 /* IRQs */
 #define MAX_ASIC_ISR_LOOPS    20
 #define ASIC3_GPIO_BASE_INCR \
@@ -525,6 +588,240 @@ static int asic3_gpio_remove(struct platform_device *pdev)
 	return gpiochip_remove(&asic->gpio);
 }
 
+static int asic3_clk_enable(struct asic3 *asic, struct asic3_clk *clk)
+{
+	unsigned long flags;
+	u32 cdex;
+
+	spin_lock_irqsave(&asic->lock, flags);
+	if (clk->enabled++ == 0) {
+		cdex = asic3_read_register(asic, ASIC3_OFFSET(CLOCK, CDEX));
+		cdex |= clk->cdex;
+		asic3_write_register(asic, ASIC3_OFFSET(CLOCK, CDEX), cdex);
+	}
+	spin_unlock_irqrestore(&asic->lock, flags);
+
+	return 0;
+}
+
+static void asic3_clk_disable(struct asic3 *asic, struct asic3_clk *clk)
+{
+	unsigned long flags;
+	u32 cdex;
+
+	WARN_ON(clk->enabled == 0);
+
+	spin_lock_irqsave(&asic->lock, flags);
+	if (--clk->enabled == 0) {
+		cdex = asic3_read_register(asic, ASIC3_OFFSET(CLOCK, CDEX));
+		cdex &= ~clk->cdex;
+		asic3_write_register(asic, ASIC3_OFFSET(CLOCK, CDEX), cdex);
+	}
+	spin_unlock_irqrestore(&asic->lock, flags);
+}
+
+/* MFD cells (SPI, PWM, LED, DS1WM, MMC) */
+static struct ds1wm_driver_data ds1wm_pdata = {
+	.active_high = 1,
+};
+
+static struct resource ds1wm_resources[] = {
+	{
+		.start = ASIC3_OWM_BASE,
+		.end   = ASIC3_OWM_BASE + 0x13,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = ASIC3_IRQ_OWM,
+		.start = ASIC3_IRQ_OWM,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+};
+
+static int ds1wm_enable(struct platform_device *pdev)
+{
+	struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+
+	/* Turn on external clocks and the OWM clock */
+	asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX0]);
+	asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX1]);
+	asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_OWM]);
+	msleep(1);
+
+	/* Reset and enable DS1WM */
+	asic3_set_register(asic, ASIC3_OFFSET(EXTCF, RESET),
+			   ASIC3_EXTCF_OWM_RESET, 1);
+	msleep(1);
+	asic3_set_register(asic, ASIC3_OFFSET(EXTCF, RESET),
+			   ASIC3_EXTCF_OWM_RESET, 0);
+	msleep(1);
+	asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
+			   ASIC3_EXTCF_OWM_EN, 1);
+	msleep(1);
+
+	return 0;
+}
+
+static int ds1wm_disable(struct platform_device *pdev)
+{
+	struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+
+	asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
+			   ASIC3_EXTCF_OWM_EN, 0);
+
+	asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_OWM]);
+	asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_EX0]);
+	asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_EX1]);
+
+	return 0;
+}
+
+static struct mfd_cell asic3_cell_ds1wm = {
+	.name          = "ds1wm",
+	.enable        = ds1wm_enable,
+	.disable       = ds1wm_disable,
+	.driver_data   = &ds1wm_pdata,
+	.num_resources = ARRAY_SIZE(ds1wm_resources),
+	.resources     = ds1wm_resources,
+};
+
+static struct tmio_mmc_data asic3_mmc_data = {
+	.hclk = 24576000,
+};
+
+static struct resource asic3_mmc_resources[] = {
+	{
+		.start = ASIC3_SD_CTRL_BASE,
+		.end   = ASIC3_SD_CTRL_BASE + 0x3ff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = ASIC3_SD_CONFIG_BASE,
+		.end   = ASIC3_SD_CONFIG_BASE + 0x1ff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0,
+		.end   = 0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static int asic3_mmc_enable(struct platform_device *pdev)
+{
+	struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+
+	/* Not sure if it must be done bit by bit, but leaving as-is */
+	asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
+			   ASIC3_SDHWCTRL_LEVCD, 1);
+	asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
+			   ASIC3_SDHWCTRL_LEVWP, 1);
+	asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
+			   ASIC3_SDHWCTRL_SUSPEND, 0);
+	asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
+			   ASIC3_SDHWCTRL_PCLR, 0);
+
+	asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX0]);
+	/* CLK32 used for card detection and for interruption detection
+	 * when HCLK is stopped.
+	 */
+	asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX1]);
+	msleep(1);
+
+	/* HCLK 24.576 MHz, BCLK 12.288 MHz: */
+	asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL),
+		CLOCK_SEL_CX | CLOCK_SEL_SD_HCLK_SEL);
+
+	asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_SD_HOST]);
+	asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_SD_BUS]);
+	msleep(1);
+
+	asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
+			   ASIC3_EXTCF_SD_MEM_ENABLE, 1);
+
+	/* Enable SD card slot 3.3V power supply */
+	asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
+			   ASIC3_SDHWCTRL_SDPWR, 1);
+
+	return 0;
+}
+
+static int asic3_mmc_disable(struct platform_device *pdev)
+{
+	struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+
+	/* Put in suspend mode */
+	asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
+			   ASIC3_SDHWCTRL_SUSPEND, 1);
+
+	/* Disable clocks */
+	asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_SD_HOST]);
+	asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_SD_BUS]);
+	asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_EX0]);
+	asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_EX1]);
+	return 0;
+}
+
+static struct mfd_cell asic3_cell_mmc = {
+	.name          = "tmio-mmc",
+	.enable        = asic3_mmc_enable,
+	.disable       = asic3_mmc_disable,
+	.driver_data   = &asic3_mmc_data,
+	.num_resources = ARRAY_SIZE(asic3_mmc_resources),
+	.resources     = asic3_mmc_resources,
+};
+
+static int __init asic3_mfd_probe(struct platform_device *pdev,
+				  struct resource *mem)
+{
+	struct asic3 *asic = platform_get_drvdata(pdev);
+	struct resource *mem_sdio;
+	int irq, ret;
+
+	mem_sdio = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!mem_sdio)
+		dev_dbg(asic->dev, "no SDIO MEM resource\n");
+
+	irq = platform_get_irq(pdev, 1);
+	if (irq < 0)
+		dev_dbg(asic->dev, "no SDIO IRQ resource\n");
+
+	/* DS1WM */
+	asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
+			   ASIC3_EXTCF_OWM_SMB, 0);
+
+	ds1wm_resources[0].start >>= asic->bus_shift;
+	ds1wm_resources[0].end   >>= asic->bus_shift;
+
+	asic3_cell_ds1wm.platform_data = &asic3_cell_ds1wm;
+	asic3_cell_ds1wm.data_size = sizeof(asic3_cell_ds1wm);
+
+	/* MMC */
+	asic3_mmc_resources[0].start >>= asic->bus_shift;
+	asic3_mmc_resources[0].end   >>= asic->bus_shift;
+	asic3_mmc_resources[1].start >>= asic->bus_shift;
+	asic3_mmc_resources[1].end   >>= asic->bus_shift;
+
+	asic3_cell_mmc.platform_data = &asic3_cell_mmc;
+	asic3_cell_mmc.data_size = sizeof(asic3_cell_mmc);
+
+	ret = mfd_add_devices(&pdev->dev, pdev->id,
+			&asic3_cell_ds1wm, 1, mem, asic->irq_base);
+	if (ret < 0)
+		goto out;
+
+	if (mem_sdio && (irq >= 0))
+		ret = mfd_add_devices(&pdev->dev, pdev->id,
+			&asic3_cell_mmc, 1, mem_sdio, irq);
+
+ out:
+	return ret;
+}
+
+static void asic3_mfd_remove(struct platform_device *pdev)
+{
+	mfd_remove_devices(&pdev->dev);
+}
 
 /* Core */
 static int __init asic3_probe(struct platform_device *pdev)
@@ -533,7 +830,6 @@ static int __init asic3_probe(struct platform_device *pdev)
 	struct asic3 *asic;
 	struct resource *mem;
 	unsigned long clksel;
-	int map_size;
 	int ret = 0;
 
 	asic = kzalloc(sizeof(struct asic3), GFP_KERNEL);
@@ -553,8 +849,7 @@ static int __init asic3_probe(struct platform_device *pdev)
 		goto out_free;
 	}
 
-	map_size = mem->end - mem->start + 1;
-	asic->mapping = ioremap(mem->start, map_size);
+	asic->mapping = ioremap(mem->start, resource_size(mem));
 	if (!asic->mapping) {
 		ret = -ENOMEM;
 		dev_err(asic->dev, "Couldn't ioremap\n");
@@ -564,7 +859,7 @@ static int __init asic3_probe(struct platform_device *pdev)
 	asic->irq_base = pdata->irq_base;
 
 	/* calculate bus shift from mem resource */
-	asic->bus_shift = 2 - (map_size >> 12);
+	asic->bus_shift = 2 - (resource_size(mem) >> 12);
 
 	clksel = 0;
 	asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL), clksel);
@@ -590,6 +885,13 @@ static int __init asic3_probe(struct platform_device *pdev)
 		goto out_irq;
 	}
 
+	/* Making a per-device copy is only needed for the
+	 * theoretical case of multiple ASIC3s on one board:
+	 */
+	memcpy(asic->clocks, asic3_clk_init, sizeof(asic3_clk_init));
+
+	asic3_mfd_probe(pdev, mem);
+
 	dev_info(asic->dev, "ASIC3 Core driver\n");
 
 	return 0;
@@ -611,6 +913,8 @@ static int asic3_remove(struct platform_device *pdev)
 	int ret;
 	struct asic3 *asic = platform_get_drvdata(pdev);
 
+	asic3_mfd_remove(pdev);
+
 	ret = asic3_gpio_remove(pdev);
 	if (ret < 0)
 		return ret;
diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c
index 7283d88656a..e5ffe561739 100644
--- a/drivers/mfd/da903x.c
+++ b/drivers/mfd/da903x.c
@@ -561,7 +561,7 @@ static int __init da903x_init(void)
 {
 	return i2c_add_driver(&da903x_driver);
 }
-module_init(da903x_init);
+subsys_initcall(da903x_init);
 
 static void __exit da903x_exit(void)
 {
diff --git a/drivers/mfd/ezx-pcap.c b/drivers/mfd/ezx-pcap.c
new file mode 100644
index 00000000000..671a7efe86a
--- /dev/null
+++ b/drivers/mfd/ezx-pcap.c
@@ -0,0 +1,505 @@
+/*
+ * Driver for Motorola PCAP2 as present in EZX phones
+ *
+ * Copyright (C) 2006 Harald Welte <laforge@openezx.org>
+ * Copyright (C) 2009 Daniel Ribeiro <drwyrm@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/mfd/ezx-pcap.h>
+#include <linux/spi/spi.h>
+
+#define PCAP_ADC_MAXQ		8
+struct pcap_adc_request {
+	u8 bank;
+	u8 ch[2];
+	u32 flags;
+	void (*callback)(void *, u16[]);
+	void *data;
+};
+
+struct pcap_adc_sync_request {
+	u16 res[2];
+	struct completion completion;
+};
+
+struct pcap_chip {
+	struct spi_device *spi;
+
+	/* IO */
+	u32 buf;
+	struct mutex io_mutex;
+
+	/* IRQ */
+	unsigned int irq_base;
+	u32 msr;
+	struct work_struct isr_work;
+	struct work_struct msr_work;
+	struct workqueue_struct *workqueue;
+
+	/* ADC */
+	struct pcap_adc_request *adc_queue[PCAP_ADC_MAXQ];
+	u8 adc_head;
+	u8 adc_tail;
+	struct mutex adc_mutex;
+};
+
+/* IO */
+static int ezx_pcap_putget(struct pcap_chip *pcap, u32 *data)
+{
+	struct spi_transfer t;
+	struct spi_message m;
+	int status;
+
+	memset(&t, 0, sizeof t);
+	spi_message_init(&m);
+	t.len = sizeof(u32);
+	spi_message_add_tail(&t, &m);
+
+	pcap->buf = *data;
+	t.tx_buf = (u8 *) &pcap->buf;
+	t.rx_buf = (u8 *) &pcap->buf;
+	status = spi_sync(pcap->spi, &m);
+
+	if (status == 0)
+		*data = pcap->buf;
+
+	return status;
+}
+
+int ezx_pcap_write(struct pcap_chip *pcap, u8 reg_num, u32 value)
+{
+	int ret;
+
+	mutex_lock(&pcap->io_mutex);
+	value &= PCAP_REGISTER_VALUE_MASK;
+	value |= PCAP_REGISTER_WRITE_OP_BIT
+		| (reg_num << PCAP_REGISTER_ADDRESS_SHIFT);
+	ret = ezx_pcap_putget(pcap, &value);
+	mutex_unlock(&pcap->io_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ezx_pcap_write);
+
+int ezx_pcap_read(struct pcap_chip *pcap, u8 reg_num, u32 *value)
+{
+	int ret;
+
+	mutex_lock(&pcap->io_mutex);
+	*value = PCAP_REGISTER_READ_OP_BIT
+		| (reg_num << PCAP_REGISTER_ADDRESS_SHIFT);
+
+	ret = ezx_pcap_putget(pcap, value);
+	mutex_unlock(&pcap->io_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ezx_pcap_read);
+
+/* IRQ */
+static inline unsigned int irq2pcap(struct pcap_chip *pcap, int irq)
+{
+	return 1 << (irq - pcap->irq_base);
+}
+
+int pcap_to_irq(struct pcap_chip *pcap, int irq)
+{
+	return pcap->irq_base + irq;
+}
+EXPORT_SYMBOL_GPL(pcap_to_irq);
+
+static void pcap_mask_irq(unsigned int irq)
+{
+	struct pcap_chip *pcap = get_irq_chip_data(irq);
+
+	pcap->msr |= irq2pcap(pcap, irq);
+	queue_work(pcap->workqueue, &pcap->msr_work);
+}
+
+static void pcap_unmask_irq(unsigned int irq)
+{
+	struct pcap_chip *pcap = get_irq_chip_data(irq);
+
+	pcap->msr &= ~irq2pcap(pcap, irq);
+	queue_work(pcap->workqueue, &pcap->msr_work);
+}
+
+static struct irq_chip pcap_irq_chip = {
+	.name	= "pcap",
+	.mask	= pcap_mask_irq,
+	.unmask	= pcap_unmask_irq,
+};
+
+static void pcap_msr_work(struct work_struct *work)
+{
+	struct pcap_chip *pcap = container_of(work, struct pcap_chip, msr_work);
+
+	ezx_pcap_write(pcap, PCAP_REG_MSR, pcap->msr);
+}
+
+static void pcap_isr_work(struct work_struct *work)
+{
+	struct pcap_chip *pcap = container_of(work, struct pcap_chip, isr_work);
+	struct pcap_platform_data *pdata = pcap->spi->dev.platform_data;
+	u32 msr, isr, int_sel, service;
+	int irq;
+
+	ezx_pcap_read(pcap, PCAP_REG_MSR, &msr);
+	ezx_pcap_read(pcap, PCAP_REG_ISR, &isr);
+
+	/* We cant service/ack irqs that are assigned to port 2 */
+	if (!(pdata->config & PCAP_SECOND_PORT)) {
+		ezx_pcap_read(pcap, PCAP_REG_INT_SEL, &int_sel);
+		isr &= ~int_sel;
+	}
+	ezx_pcap_write(pcap, PCAP_REG_ISR, isr);
+
+	local_irq_disable();
+	service = isr & ~msr;
+
+	for (irq = pcap->irq_base; service; service >>= 1, irq++) {
+		if (service & 1) {
+			struct irq_desc *desc = irq_to_desc(irq);
+
+			if (WARN(!desc, KERN_WARNING
+					"Invalid PCAP IRQ %d\n", irq))
+				break;
+
+			if (desc->status & IRQ_DISABLED)
+				note_interrupt(irq, desc, IRQ_NONE);
+			else
+				desc->handle_irq(irq, desc);
+		}
+	}
+	local_irq_enable();
+}
+
+static void pcap_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	struct pcap_chip *pcap = get_irq_data(irq);
+
+	desc->chip->ack(irq);
+	queue_work(pcap->workqueue, &pcap->isr_work);
+	return;
+}
+
+/* ADC */
+static void pcap_disable_adc(struct pcap_chip *pcap)
+{
+	u32 tmp;
+
+	ezx_pcap_read(pcap, PCAP_REG_ADC, &tmp);
+	tmp &= ~(PCAP_ADC_ADEN|PCAP_ADC_BATT_I_ADC|PCAP_ADC_BATT_I_POLARITY);
+	ezx_pcap_write(pcap, PCAP_REG_ADC, tmp);
+}
+
+static void pcap_adc_trigger(struct pcap_chip *pcap)
+{
+	u32 tmp;
+	u8 head;
+
+	mutex_lock(&pcap->adc_mutex);
+	head = pcap->adc_head;
+	if (!pcap->adc_queue[head]) {
+		/* queue is empty, save power */
+		pcap_disable_adc(pcap);
+		mutex_unlock(&pcap->adc_mutex);
+		return;
+	}
+	mutex_unlock(&pcap->adc_mutex);
+
+	/* start conversion on requested bank */
+	tmp = pcap->adc_queue[head]->flags | PCAP_ADC_ADEN;
+
+	if (pcap->adc_queue[head]->bank == PCAP_ADC_BANK_1)
+		tmp |= PCAP_ADC_AD_SEL1;
+
+	ezx_pcap_write(pcap, PCAP_REG_ADC, tmp);
+	ezx_pcap_write(pcap, PCAP_REG_ADR, PCAP_ADR_ASC);
+}
+
+static irqreturn_t pcap_adc_irq(int irq, void *_pcap)
+{
+	struct pcap_chip *pcap = _pcap;
+	struct pcap_adc_request *req;
+	u16 res[2];
+	u32 tmp;
+
+	mutex_lock(&pcap->adc_mutex);
+	req = pcap->adc_queue[pcap->adc_head];
+
+	if (WARN(!req, KERN_WARNING "adc irq without pending request\n"))
+		return IRQ_HANDLED;
+
+	/* read requested channels results */
+	ezx_pcap_read(pcap, PCAP_REG_ADC, &tmp);
+	tmp &= ~(PCAP_ADC_ADA1_MASK | PCAP_ADC_ADA2_MASK);
+	tmp |= (req->ch[0] << PCAP_ADC_ADA1_SHIFT);
+	tmp |= (req->ch[1] << PCAP_ADC_ADA2_SHIFT);
+	ezx_pcap_write(pcap, PCAP_REG_ADC, tmp);
+	ezx_pcap_read(pcap, PCAP_REG_ADR, &tmp);
+	res[0] = (tmp & PCAP_ADR_ADD1_MASK) >> PCAP_ADR_ADD1_SHIFT;
+	res[1] = (tmp & PCAP_ADR_ADD2_MASK) >> PCAP_ADR_ADD2_SHIFT;
+
+	pcap->adc_queue[pcap->adc_head] = NULL;
+	pcap->adc_head = (pcap->adc_head + 1) & (PCAP_ADC_MAXQ - 1);
+	mutex_unlock(&pcap->adc_mutex);
+
+	/* pass the results and release memory */
+	req->callback(req->data, res);
+	kfree(req);
+
+	/* trigger next conversion (if any) on queue */
+	pcap_adc_trigger(pcap);
+
+	return IRQ_HANDLED;
+}
+
+int pcap_adc_async(struct pcap_chip *pcap, u8 bank, u32 flags, u8 ch[],
+						void *callback, void *data)
+{
+	struct pcap_adc_request *req;
+
+	/* This will be freed after we have a result */
+	req = kmalloc(sizeof(struct pcap_adc_request), GFP_KERNEL);
+	if (!req)
+		return -ENOMEM;
+
+	req->bank = bank;
+	req->flags = flags;
+	req->ch[0] = ch[0];
+	req->ch[1] = ch[1];
+	req->callback = callback;
+	req->data = data;
+
+	mutex_lock(&pcap->adc_mutex);
+	if (pcap->adc_queue[pcap->adc_tail]) {
+		mutex_unlock(&pcap->adc_mutex);
+		kfree(req);
+		return -EBUSY;
+	}
+	pcap->adc_queue[pcap->adc_tail] = req;
+	pcap->adc_tail = (pcap->adc_tail + 1) & (PCAP_ADC_MAXQ - 1);
+	mutex_unlock(&pcap->adc_mutex);
+
+	/* start conversion */
+	pcap_adc_trigger(pcap);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pcap_adc_async);
+
+static void pcap_adc_sync_cb(void *param, u16 res[])
+{
+	struct pcap_adc_sync_request *req = param;
+
+	req->res[0] = res[0];
+	req->res[1] = res[1];
+	complete(&req->completion);
+}
+
+int pcap_adc_sync(struct pcap_chip *pcap, u8 bank, u32 flags, u8 ch[],
+								u16 res[])
+{
+	struct pcap_adc_sync_request sync_data;
+	int ret;
+
+	init_completion(&sync_data.completion);
+	ret = pcap_adc_async(pcap, bank, flags, ch, pcap_adc_sync_cb,
+								&sync_data);
+	if (ret)
+		return ret;
+	wait_for_completion(&sync_data.completion);
+	res[0] = sync_data.res[0];
+	res[1] = sync_data.res[1];
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pcap_adc_sync);
+
+/* subdevs */
+static int pcap_remove_subdev(struct device *dev, void *unused)
+{
+	platform_device_unregister(to_platform_device(dev));
+	return 0;
+}
+
+static int __devinit pcap_add_subdev(struct pcap_chip *pcap,
+						struct pcap_subdev *subdev)
+{
+	struct platform_device *pdev;
+
+	pdev = platform_device_alloc(subdev->name, subdev->id);
+	pdev->dev.parent = &pcap->spi->dev;
+	pdev->dev.platform_data = subdev->platform_data;
+	platform_set_drvdata(pdev, pcap);
+
+	return platform_device_add(pdev);
+}
+
+static int __devexit ezx_pcap_remove(struct spi_device *spi)
+{
+	struct pcap_chip *pcap = dev_get_drvdata(&spi->dev);
+	struct pcap_platform_data *pdata = spi->dev.platform_data;
+	int i, adc_irq;
+
+	/* remove all registered subdevs */
+	device_for_each_child(&spi->dev, NULL, pcap_remove_subdev);
+
+	/* cleanup ADC */
+	adc_irq = pcap_to_irq(pcap, (pdata->config & PCAP_SECOND_PORT) ?
+				PCAP_IRQ_ADCDONE2 : PCAP_IRQ_ADCDONE);
+	free_irq(adc_irq, pcap);
+	mutex_lock(&pcap->adc_mutex);
+	for (i = 0; i < PCAP_ADC_MAXQ; i++)
+		kfree(pcap->adc_queue[i]);
+	mutex_unlock(&pcap->adc_mutex);
+
+	/* cleanup irqchip */
+	for (i = pcap->irq_base; i < (pcap->irq_base + PCAP_NIRQS); i++)
+		set_irq_chip_and_handler(i, NULL, NULL);
+
+	destroy_workqueue(pcap->workqueue);
+
+	kfree(pcap);
+
+	return 0;
+}
+
+static int __devinit ezx_pcap_probe(struct spi_device *spi)
+{
+	struct pcap_platform_data *pdata = spi->dev.platform_data;
+	struct pcap_chip *pcap;
+	int i, adc_irq;
+	int ret = -ENODEV;
+
+	/* platform data is required */
+	if (!pdata)
+		goto ret;
+
+	pcap = kzalloc(sizeof(*pcap), GFP_KERNEL);
+	if (!pcap) {
+		ret = -ENOMEM;
+		goto ret;
+	}
+
+	mutex_init(&pcap->io_mutex);
+	mutex_init(&pcap->adc_mutex);
+	INIT_WORK(&pcap->isr_work, pcap_isr_work);
+	INIT_WORK(&pcap->msr_work, pcap_msr_work);
+	dev_set_drvdata(&spi->dev, pcap);
+
+	/* setup spi */
+	spi->bits_per_word = 32;
+	spi->mode = SPI_MODE_0 | (pdata->config & PCAP_CS_AH ? SPI_CS_HIGH : 0);
+	ret = spi_setup(spi);
+	if (ret)
+		goto free_pcap;
+
+	pcap->spi = spi;
+
+	/* setup irq */
+	pcap->irq_base = pdata->irq_base;
+	pcap->workqueue = create_singlethread_workqueue("pcapd");
+	if (!pcap->workqueue) {
+		dev_err(&spi->dev, "cant create pcap thread\n");
+		goto free_pcap;
+	}
+
+	/* redirect interrupts to AP, except adcdone2 */
+	if (!(pdata->config & PCAP_SECOND_PORT))
+		ezx_pcap_write(pcap, PCAP_REG_INT_SEL,
+					(1 << PCAP_IRQ_ADCDONE2));
+
+	/* setup irq chip */
+	for (i = pcap->irq_base; i < (pcap->irq_base + PCAP_NIRQS); i++) {
+		set_irq_chip_and_handler(i, &pcap_irq_chip, handle_simple_irq);
+		set_irq_chip_data(i, pcap);
+#ifdef CONFIG_ARM
+		set_irq_flags(i, IRQF_VALID);
+#else
+		set_irq_noprobe(i);
+#endif
+	}
+
+	/* mask/ack all PCAP interrupts */
+	ezx_pcap_write(pcap, PCAP_REG_MSR, PCAP_MASK_ALL_INTERRUPT);
+	ezx_pcap_write(pcap, PCAP_REG_ISR, PCAP_CLEAR_INTERRUPT_REGISTER);
+	pcap->msr = PCAP_MASK_ALL_INTERRUPT;
+
+	set_irq_type(spi->irq, IRQ_TYPE_EDGE_RISING);
+	set_irq_data(spi->irq, pcap);
+	set_irq_chained_handler(spi->irq, pcap_irq_handler);
+	set_irq_wake(spi->irq, 1);
+
+	/* ADC */
+	adc_irq = pcap_to_irq(pcap, (pdata->config & PCAP_SECOND_PORT) ?
+					PCAP_IRQ_ADCDONE2 : PCAP_IRQ_ADCDONE);
+
+	ret = request_irq(adc_irq, pcap_adc_irq, 0, "ADC", pcap);
+	if (ret)
+		goto free_irqchip;
+
+	/* setup subdevs */
+	for (i = 0; i < pdata->num_subdevs; i++) {
+		ret = pcap_add_subdev(pcap, &pdata->subdevs[i]);
+		if (ret)
+			goto remove_subdevs;
+	}
+
+	/* board specific quirks */
+	if (pdata->init)
+		pdata->init(pcap);
+
+	return 0;
+
+remove_subdevs:
+	device_for_each_child(&spi->dev, NULL, pcap_remove_subdev);
+/* free_adc: */
+	free_irq(adc_irq, pcap);
+free_irqchip:
+	for (i = pcap->irq_base; i < (pcap->irq_base + PCAP_NIRQS); i++)
+		set_irq_chip_and_handler(i, NULL, NULL);
+/* destroy_workqueue: */
+	destroy_workqueue(pcap->workqueue);
+free_pcap:
+	kfree(pcap);
+ret:
+	return ret;
+}
+
+static struct spi_driver ezxpcap_driver = {
+	.probe	= ezx_pcap_probe,
+	.remove = __devexit_p(ezx_pcap_remove),
+	.driver = {
+		.name	= "ezx-pcap",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init ezx_pcap_init(void)
+{
+	return spi_register_driver(&ezxpcap_driver);
+}
+
+static void __exit ezx_pcap_exit(void)
+{
+	spi_unregister_driver(&ezxpcap_driver);
+}
+
+module_init(ezx_pcap_init);
+module_exit(ezx_pcap_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Daniel Ribeiro / Harald Welte");
+MODULE_DESCRIPTION("Motorola PCAP2 ASIC Driver");
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index 082c197ab9b..8d3c38bf971 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -705,5 +705,5 @@ MODULE_DESCRIPTION("I2C chip driver for NXP PCF50633 PMU");
 MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
 MODULE_LICENSE("GPL");
 
-module_init(pcf50633_init);
+subsys_initcall(pcf50633_init);
 module_exit(pcf50633_exit);
diff --git a/drivers/mfd/pcf50633-gpio.c b/drivers/mfd/pcf50633-gpio.c
index 2fa2eca5c9c..9ab19a8f669 100644
--- a/drivers/mfd/pcf50633-gpio.c
+++ b/drivers/mfd/pcf50633-gpio.c
@@ -15,6 +15,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 
 #include <linux/mfd/pcf50633/core.h>
 #include <linux/mfd/pcf50633/gpio.h>
@@ -116,3 +117,5 @@ int pcf50633_gpio_power_supply_set(struct pcf50633 *pcf,
 	return pcf50633_reg_set_bit_mask(pcf, reg, mask, val);
 }
 EXPORT_SYMBOL_GPL(pcf50633_gpio_power_supply_set);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c
index 875f7a87573..0a255c1f1ce 100644
--- a/drivers/mfd/t7l66xb.c
+++ b/drivers/mfd/t7l66xb.c
@@ -108,7 +108,7 @@ static int t7l66xb_mmc_disable(struct platform_device *mmc)
 
 /*--------------------------------------------------------------------------*/
 
-static const struct tmio_mmc_data t7166xb_mmc_data = {
+static struct tmio_mmc_data t7166xb_mmc_data = {
 	.hclk = 24000000,
 };
 
diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c
index c3993ac2054..3280ab33f88 100644
--- a/drivers/mfd/tc6387xb.c
+++ b/drivers/mfd/tc6387xb.c
@@ -75,7 +75,7 @@ static int tc6387xb_mmc_disable(struct platform_device *mmc)
 
 /*--------------------------------------------------------------------------*/
 
-const static struct tmio_mmc_data tc6387xb_mmc_data = {
+static struct tmio_mmc_data tc6387xb_mmc_data = {
 	.hclk = 24000000,
 };
 
diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
index 9d2abb5d6e2..1429a7341a9 100644
--- a/drivers/mfd/tc6393xb.c
+++ b/drivers/mfd/tc6393xb.c
@@ -136,7 +136,7 @@ static int tc6393xb_nand_enable(struct platform_device *nand)
 	return 0;
 }
 
-const static struct tmio_mmc_data tc6393xb_mmc_data = {
+static struct tmio_mmc_data tc6393xb_mmc_data = {
 	.hclk = 24000000,
 };
 
diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c
index ec90e953adc..ca54996ffd0 100644
--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl4030-core.c
@@ -101,6 +101,12 @@
 #define twl_has_usb()	false
 #endif
 
+#if defined(CONFIG_TWL4030_WATCHDOG) || \
+	defined(CONFIG_TWL4030_WATCHDOG_MODULE)
+#define twl_has_watchdog()        true
+#else
+#define twl_has_watchdog()        false
+#endif
 
 /* Triton Core internal information (BEGIN) */
 
@@ -526,6 +532,12 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 		usb_transceiver = child;
 	}
 
+	if (twl_has_watchdog()) {
+		child = add_child(0, "twl4030_wdt", NULL, 0, false, 0, 0);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+	}
+
 	if (twl_has_regulator()) {
 		/*
 		child = add_regulator(TWL4030_REG_VPLL1, pdata->vpll1);
@@ -647,7 +659,7 @@ static inline int __init unprotect_pm_master(void)
 	return e;
 }
 
-static void __init clocks_init(struct device *dev)
+static void clocks_init(struct device *dev)
 {
 	int e = 0;
 	struct clk *osc;
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index aca2670afd7..bae61b22501 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -255,7 +255,7 @@ static int twl4030_irq_thread(void *data)
  * thread.  All we do here is acknowledge and mask the interrupt and wakeup
  * the kernel thread.
  */
-static void handle_twl4030_pih(unsigned int irq, irq_desc_t *desc)
+static void handle_twl4030_pih(unsigned int irq, struct irq_desc *desc)
 {
 	/* Acknowledge, clear *AND* mask the interrupt... */
 	desc->chip->ack(irq);
diff --git a/drivers/mfd/ucb1400_core.c b/drivers/mfd/ucb1400_core.c
index 178159e264c..78c2135c5de 100644
--- a/drivers/mfd/ucb1400_core.c
+++ b/drivers/mfd/ucb1400_core.c
@@ -23,6 +23,26 @@
 #include <linux/module.h>
 #include <linux/ucb1400.h>
 
+unsigned int ucb1400_adc_read(struct snd_ac97 *ac97, u16 adc_channel,
+		int adcsync)
+{
+	unsigned int val;
+
+	if (adcsync)
+		adc_channel |= UCB_ADC_SYNC_ENA;
+
+	ucb1400_reg_write(ac97, UCB_ADC_CR, UCB_ADC_ENA | adc_channel);
+	ucb1400_reg_write(ac97, UCB_ADC_CR, UCB_ADC_ENA | adc_channel |
+			UCB_ADC_START);
+
+	while (!((val = ucb1400_reg_read(ac97, UCB_ADC_DATA))
+				& UCB_ADC_DAT_VALID))
+		schedule_timeout_uninterruptible(1);
+
+	return val & UCB_ADC_DAT_MASK;
+}
+EXPORT_SYMBOL_GPL(ucb1400_adc_read);
+
 static int ucb1400_core_probe(struct device *dev)
 {
 	int err;
diff --git a/drivers/mfd/wm8350-regmap.c b/drivers/mfd/wm8350-regmap.c
index 9a4cc954cb7..7ccc1eab98a 100644
--- a/drivers/mfd/wm8350-regmap.c
+++ b/drivers/mfd/wm8350-regmap.c
@@ -3186,7 +3186,7 @@ const struct wm8350_reg_access wm8350_reg_io_map[] = {
 	/*  read    write volatile */
 	{ 0xFFFF, 0xFFFF, 0xFFFF }, /* R0   - Reset/ID */
 	{ 0x7CFF, 0x0C00, 0x7FFF }, /* R1   - ID */
-	{ 0x0000, 0x0000, 0x0000 }, /* R2 */
+	{ 0x007F, 0x0000, 0x0000 }, /* R2   - ROM Mask ID */
 	{ 0xBE3B, 0xBE3B, 0x8000 }, /* R3   - System Control 1 */
 	{ 0xFEF7, 0xFEF7, 0xF800 }, /* R4   - System Control 2 */
 	{ 0x80FF, 0x80FF, 0x8000 }, /* R5   - System Hibernate */
@@ -3411,7 +3411,7 @@ const struct wm8350_reg_access wm8350_reg_io_map[] = {
 	{ 0x0000, 0x0000, 0x0000 }, /* R224 */
 	{ 0x8F3F, 0x0000, 0xFFFF }, /* R225 - DCDC/LDO status */
 	{ 0x0000, 0x0000, 0xFFFF }, /* R226 - Charger status */
-	{ 0x0000, 0x0000, 0xFFFF }, /* R227 */
+	{ 0x34FE, 0x0000, 0xFFFF }, /* R227 */
 	{ 0x0000, 0x0000, 0x0000 }, /* R228 */
 	{ 0x0000, 0x0000, 0x0000 }, /* R229 */
 	{ 0xFFFF, 0x1FFF, 0xFFFF }, /* R230 - GPIO Pin Status */
diff --git a/drivers/mfd/wm8400-core.c b/drivers/mfd/wm8400-core.c
index 7c21bf79156..ecfc8bbe89b 100644
--- a/drivers/mfd/wm8400-core.c
+++ b/drivers/mfd/wm8400-core.c
@@ -460,7 +460,7 @@ static int __init wm8400_module_init(void)
 
 	return ret;
 }
-module_init(wm8400_module_init);
+subsys_initcall(wm8400_module_init);
 
 static void __exit wm8400_module_exit(void)
 {
diff --git a/drivers/misc/sgi-gru/Makefile b/drivers/misc/sgi-gru/Makefile
index bcd8136d2f9..7c4c306dfa8 100644
--- a/drivers/misc/sgi-gru/Makefile
+++ b/drivers/misc/sgi-gru/Makefile
@@ -3,5 +3,5 @@ ifdef CONFIG_SGI_GRU_DEBUG
 endif
 
 obj-$(CONFIG_SGI_GRU) := gru.o
-gru-y := grufile.o grumain.o grufault.o grutlbpurge.o gruprocfs.o grukservices.o gruhandles.o
+gru-y := grufile.o grumain.o grufault.o grutlbpurge.o gruprocfs.o grukservices.o gruhandles.o grukdump.o
 
diff --git a/drivers/misc/sgi-gru/gru_instructions.h b/drivers/misc/sgi-gru/gru_instructions.h
index 3fde33c1e8f..3c9c06618e6 100644
--- a/drivers/misc/sgi-gru/gru_instructions.h
+++ b/drivers/misc/sgi-gru/gru_instructions.h
@@ -81,6 +81,8 @@ struct control_block_extended_exc_detail {
 	int		exopc;
 	long		exceptdet0;
 	int		exceptdet1;
+	int		cbrstate;
+	int		cbrexecstatus;
 };
 
 /*
@@ -107,7 +109,8 @@ struct gru_instruction_bits {
     unsigned char		reserved2: 2;
     unsigned char		istatus:   2;
     unsigned char		isubstatus:4;
-    unsigned char		reserved3: 2;
+    unsigned char		reserved3: 1;
+    unsigned char		tlb_fault_color: 1;
     /* DW 1 */
     unsigned long		idef4;		/* 42 bits: TRi1, BufSize */
     /* DW 2-6 */
@@ -250,17 +253,37 @@ struct gru_instruction {
 #define CBE_CAUSE_HA_RESPONSE_FATAL		(1 << 13)
 #define CBE_CAUSE_HA_RESPONSE_NON_FATAL		(1 << 14)
 #define CBE_CAUSE_ADDRESS_SPACE_DECODE_ERROR	(1 << 15)
-#define CBE_CAUSE_RESPONSE_DATA_ERROR		(1 << 16)
-#define CBE_CAUSE_PROTOCOL_STATE_DATA_ERROR	(1 << 17)
+#define CBE_CAUSE_PROTOCOL_STATE_DATA_ERROR	(1 << 16)
+#define CBE_CAUSE_RA_RESPONSE_DATA_ERROR	(1 << 17)
+#define CBE_CAUSE_HA_RESPONSE_DATA_ERROR	(1 << 18)
+
+/* CBE cbrexecstatus bits */
+#define CBR_EXS_ABORT_OCC_BIT			0
+#define CBR_EXS_INT_OCC_BIT			1
+#define CBR_EXS_PENDING_BIT			2
+#define CBR_EXS_QUEUED_BIT			3
+#define CBR_EXS_TLB_INVAL_BIT			4
+#define CBR_EXS_EXCEPTION_BIT			5
+
+#define CBR_EXS_ABORT_OCC			(1 << CBR_EXS_ABORT_OCC_BIT)
+#define CBR_EXS_INT_OCC				(1 << CBR_EXS_INT_OCC_BIT)
+#define CBR_EXS_PENDING				(1 << CBR_EXS_PENDING_BIT)
+#define CBR_EXS_QUEUED				(1 << CBR_EXS_QUEUED_BIT)
+#define CBR_TLB_INVAL				(1 << CBR_EXS_TLB_INVAL_BIT)
+#define CBR_EXS_EXCEPTION			(1 << CBR_EXS_EXCEPTION_BIT)
 
 /*
  * Exceptions are retried for the following cases. If any OTHER bits are set
  * in ecause, the exception is not retryable.
  */
-#define EXCEPTION_RETRY_BITS (CBE_CAUSE_RESPONSE_DATA_ERROR |		\
-			      CBE_CAUSE_RA_REQUEST_TIMEOUT |		\
+#define EXCEPTION_RETRY_BITS (CBE_CAUSE_EXECUTION_HW_ERROR |		\
 			      CBE_CAUSE_TLBHW_ERROR |			\
-			      CBE_CAUSE_HA_REQUEST_TIMEOUT)
+			      CBE_CAUSE_RA_REQUEST_TIMEOUT |		\
+			      CBE_CAUSE_RA_RESPONSE_NON_FATAL |		\
+			      CBE_CAUSE_HA_RESPONSE_NON_FATAL |		\
+			      CBE_CAUSE_RA_RESPONSE_DATA_ERROR |	\
+			      CBE_CAUSE_HA_RESPONSE_DATA_ERROR		\
+			      )
 
 /* Message queue head structure */
 union gru_mesqhead {
@@ -600,9 +623,11 @@ static inline int gru_get_cb_substatus(void *cb)
 	return cbs->isubstatus;
 }
 
-/* Check the status of a CB. If the CB is in UPM mode, call the
- * OS to handle the UPM status.
- * Returns the CB status field value (0 for normal completion)
+/*
+ * User interface to check an instruction status. UPM and exceptions
+ * are handled automatically. However, this function does NOT wait
+ * for an active instruction to complete.
+ *
  */
 static inline int gru_check_status(void *cb)
 {
@@ -610,34 +635,31 @@ static inline int gru_check_status(void *cb)
 	int ret;
 
 	ret = cbs->istatus;
-	if (ret == CBS_CALL_OS)
+	if (ret != CBS_ACTIVE)
 		ret = gru_check_status_proc(cb);
 	return ret;
 }
 
-/* Wait for CB to complete.
- * Returns the CB status field value (0 for normal completion)
+/*
+ * User interface (via inline function) to wait for an instruction
+ * to complete. Completion status (IDLE or EXCEPTION is returned
+ * to the user. Exception due to hardware errors are automatically
+ * retried before returning an exception.
+ *
  */
 static inline int gru_wait(void *cb)
 {
-	struct gru_control_block_status *cbs = (void *)cb;
-	int ret = cbs->istatus;
-
-	if (ret != CBS_IDLE)
-		ret = gru_wait_proc(cb);
-	return ret;
+	return gru_wait_proc(cb);
 }
 
-/* Wait for CB to complete. Aborts program if error. (Note: error does NOT
+/*
+ * Wait for CB to complete. Aborts program if error. (Note: error does NOT
  * mean TLB mis - only fatal errors such as memory parity error or user
  * bugs will cause termination.
  */
 static inline void gru_wait_abort(void *cb)
 {
-	struct gru_control_block_status *cbs = (void *)cb;
-
-	if (cbs->istatus != CBS_IDLE)
-		gru_wait_abort_proc(cb);
+	gru_wait_abort_proc(cb);
 }
 
 
diff --git a/drivers/misc/sgi-gru/grufault.c b/drivers/misc/sgi-gru/grufault.c
index ab118558552..679e0177828 100644
--- a/drivers/misc/sgi-gru/grufault.c
+++ b/drivers/misc/sgi-gru/grufault.c
@@ -166,7 +166,8 @@ static inline struct gru_state *irq_to_gru(int irq)
  * the GRU, atomic operations must be used to clear bits.
  */
 static void get_clear_fault_map(struct gru_state *gru,
-				struct gru_tlb_fault_map *map)
+				struct gru_tlb_fault_map *imap,
+				struct gru_tlb_fault_map *dmap)
 {
 	unsigned long i, k;
 	struct gru_tlb_fault_map *tfm;
@@ -177,7 +178,11 @@ static void get_clear_fault_map(struct gru_state *gru,
 		k = tfm->fault_bits[i];
 		if (k)
 			k = xchg(&tfm->fault_bits[i], 0UL);
-		map->fault_bits[i] = k;
+		imap->fault_bits[i] = k;
+		k = tfm->done_bits[i];
+		if (k)
+			k = xchg(&tfm->done_bits[i], 0UL);
+		dmap->fault_bits[i] = k;
 	}
 
 	/*
@@ -334,6 +339,12 @@ static int gru_try_dropin(struct gru_thread_state *gts,
 	 * Might be a hardware race OR a stupid user. Ignore FMM because FMM
 	 * is a transient state.
 	 */
+	if (tfh->status != TFHSTATUS_EXCEPTION) {
+		gru_flush_cache(tfh);
+		if (tfh->status != TFHSTATUS_EXCEPTION)
+			goto failnoexception;
+		STAT(tfh_stale_on_fault);
+	}
 	if (tfh->state == TFHSTATE_IDLE)
 		goto failidle;
 	if (tfh->state == TFHSTATE_MISS_FMM && cb)
@@ -401,8 +412,17 @@ failfmm:
 	gru_dbg(grudev, "FAILED fmm tfh: 0x%p, state %d\n", tfh, tfh->state);
 	return 0;
 
+failnoexception:
+	/* TFH status did not show exception pending */
+	gru_flush_cache(tfh);
+	if (cb)
+		gru_flush_cache(cb);
+	STAT(tlb_dropin_fail_no_exception);
+	gru_dbg(grudev, "FAILED non-exception tfh: 0x%p, status %d, state %d\n", tfh, tfh->status, tfh->state);
+	return 0;
+
 failidle:
-	/* TFH was idle  - no miss pending */
+	/* TFH state was idle  - no miss pending */
 	gru_flush_cache(tfh);
 	if (cb)
 		gru_flush_cache(cb);
@@ -438,7 +458,7 @@ failactive:
 irqreturn_t gru_intr(int irq, void *dev_id)
 {
 	struct gru_state *gru;
-	struct gru_tlb_fault_map map;
+	struct gru_tlb_fault_map imap, dmap;
 	struct gru_thread_state *gts;
 	struct gru_tlb_fault_handle *tfh = NULL;
 	int cbrnum, ctxnum;
@@ -451,11 +471,15 @@ irqreturn_t gru_intr(int irq, void *dev_id)
 			raw_smp_processor_id(), irq);
 		return IRQ_NONE;
 	}
-	get_clear_fault_map(gru, &map);
-	gru_dbg(grudev, "irq %d, gru %x, map 0x%lx\n", irq, gru->gs_gid,
-		map.fault_bits[0]);
+	get_clear_fault_map(gru, &imap, &dmap);
+
+	for_each_cbr_in_tfm(cbrnum, dmap.fault_bits) {
+		complete(gru->gs_blade->bs_async_wq);
+		gru_dbg(grudev, "gid %d, cbr_done %d, done %d\n",
+			gru->gs_gid, cbrnum, gru->gs_blade->bs_async_wq->done);
+	}
 
-	for_each_cbr_in_tfm(cbrnum, map.fault_bits) {
+	for_each_cbr_in_tfm(cbrnum, imap.fault_bits) {
 		tfh = get_tfh_by_index(gru, cbrnum);
 		prefetchw(tfh);	/* Helps on hdw, required for emulator */
 
@@ -472,7 +496,9 @@ irqreturn_t gru_intr(int irq, void *dev_id)
 		 * This is running in interrupt context. Trylock the mmap_sem.
 		 * If it fails, retry the fault in user context.
 		 */
-		if (down_read_trylock(&gts->ts_mm->mmap_sem)) {
+		if (!gts->ts_force_cch_reload &&
+					down_read_trylock(&gts->ts_mm->mmap_sem)) {
+			gts->ustats.fmm_tlbdropin++;
 			gru_try_dropin(gts, tfh, NULL);
 			up_read(&gts->ts_mm->mmap_sem);
 		} else {
@@ -491,6 +517,7 @@ static int gru_user_dropin(struct gru_thread_state *gts,
 	struct gru_mm_struct *gms = gts->ts_gms;
 	int ret;
 
+	gts->ustats.upm_tlbdropin++;
 	while (1) {
 		wait_event(gms->ms_wait_queue,
 			   atomic_read(&gms->ms_range_active) == 0);
@@ -546,8 +573,8 @@ int gru_handle_user_call_os(unsigned long cb)
 	 * CCH may contain stale data if ts_force_cch_reload is set.
 	 */
 	if (gts->ts_gru && gts->ts_force_cch_reload) {
-		gru_update_cch(gts, 0);
 		gts->ts_force_cch_reload = 0;
+		gru_update_cch(gts, 0);
 	}
 
 	ret = -EAGAIN;
@@ -589,20 +616,26 @@ int gru_get_exception_detail(unsigned long arg)
 	} else if (gts->ts_gru) {
 		cbrnum = thread_cbr_number(gts, ucbnum);
 		cbe = get_cbe_by_index(gts->ts_gru, cbrnum);
-		prefetchw(cbe);/* Harmless on hardware, required for emulator */
+		gru_flush_cache(cbe);	/* CBE not coherent */
 		excdet.opc = cbe->opccpy;
 		excdet.exopc = cbe->exopccpy;
 		excdet.ecause = cbe->ecause;
 		excdet.exceptdet0 = cbe->idef1upd;
 		excdet.exceptdet1 = cbe->idef3upd;
+		excdet.cbrstate = cbe->cbrstate;
+		excdet.cbrexecstatus = cbe->cbrexecstatus;
+		gru_flush_cache(cbe);
 		ret = 0;
 	} else {
 		ret = -EAGAIN;
 	}
 	gru_unlock_gts(gts);
 
-	gru_dbg(grudev, "address 0x%lx, ecause 0x%x\n", excdet.cb,
-		excdet.ecause);
+	gru_dbg(grudev,
+		"cb 0x%lx, op %d, exopc %d, cbrstate %d, cbrexecstatus 0x%x, ecause 0x%x, "
+		"exdet0 0x%lx, exdet1 0x%x\n",
+		excdet.cb, excdet.opc, excdet.exopc, excdet.cbrstate, excdet.cbrexecstatus,
+		excdet.ecause, excdet.exceptdet0, excdet.exceptdet1);
 	if (!ret && copy_to_user((void __user *)arg, &excdet, sizeof(excdet)))
 		ret = -EFAULT;
 	return ret;
@@ -627,7 +660,7 @@ static int gru_unload_all_contexts(void)
 			if (gts && mutex_trylock(&gts->ts_ctxlock)) {
 				spin_unlock(&gru->gs_lock);
 				gru_unload_context(gts, 1);
-				gru_unlock_gts(gts);
+				mutex_unlock(&gts->ts_ctxlock);
 				spin_lock(&gru->gs_lock);
 			}
 		}
@@ -669,6 +702,7 @@ int gru_user_flush_tlb(unsigned long arg)
 {
 	struct gru_thread_state *gts;
 	struct gru_flush_tlb_req req;
+	struct gru_mm_struct *gms;
 
 	STAT(user_flush_tlb);
 	if (copy_from_user(&req, (void __user *)arg, sizeof(req)))
@@ -681,8 +715,34 @@ int gru_user_flush_tlb(unsigned long arg)
 	if (!gts)
 		return -EINVAL;
 
-	gru_flush_tlb_range(gts->ts_gms, req.vaddr, req.len);
+	gms = gts->ts_gms;
 	gru_unlock_gts(gts);
+	gru_flush_tlb_range(gms, req.vaddr, req.len);
+
+	return 0;
+}
+
+/*
+ * Fetch GSEG statisticss
+ */
+long gru_get_gseg_statistics(unsigned long arg)
+{
+	struct gru_thread_state *gts;
+	struct gru_get_gseg_statistics_req req;
+
+	if (copy_from_user(&req, (void __user *)arg, sizeof(req)))
+		return -EFAULT;
+
+	gts = gru_find_lock_gts(req.gseg);
+	if (gts) {
+		memcpy(&req.stats, &gts->ustats, sizeof(gts->ustats));
+		gru_unlock_gts(gts);
+	} else {
+		memset(&req.stats, 0, sizeof(gts->ustats));
+	}
+
+	if (copy_to_user((void __user *)arg, &req, sizeof(req)))
+		return -EFAULT;
 
 	return 0;
 }
@@ -691,18 +751,34 @@ int gru_user_flush_tlb(unsigned long arg)
  * Register the current task as the user of the GSEG slice.
  * Needed for TLB fault interrupt targeting.
  */
-int gru_set_task_slice(long address)
+int gru_set_context_option(unsigned long arg)
 {
 	struct gru_thread_state *gts;
+	struct gru_set_context_option_req req;
+	int ret = 0;
+
+	STAT(set_context_option);
+	if (copy_from_user(&req, (void __user *)arg, sizeof(req)))
+		return -EFAULT;
+	gru_dbg(grudev, "op %d, gseg 0x%lx, value1 0x%lx\n", req.op, req.gseg, req.val1);
 
-	STAT(set_task_slice);
-	gru_dbg(grudev, "address 0x%lx\n", address);
-	gts = gru_alloc_locked_gts(address);
+	gts = gru_alloc_locked_gts(req.gseg);
 	if (!gts)
 		return -EINVAL;
 
-	gts->ts_tgid_owner = current->tgid;
+	switch (req.op) {
+	case sco_gseg_owner:
+ 		/* Register the current task as the GSEG owner */
+		gts->ts_tgid_owner = current->tgid;
+		break;
+	case sco_cch_req_slice:
+ 		/* Set the CCH slice option */
+		gts->ts_cch_req_slice = req.val1 & 3;
+		break;
+	default:
+		ret = -EINVAL;
+	}
 	gru_unlock_gts(gts);
 
-	return 0;
+	return ret;
 }
diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c
index 3ce2920e2bf..fa2d93a9fb8 100644
--- a/drivers/misc/sgi-gru/grufile.c
+++ b/drivers/misc/sgi-gru/grufile.c
@@ -46,6 +46,7 @@
 
 struct gru_blade_state *gru_base[GRU_MAX_BLADES] __read_mostly;
 unsigned long gru_start_paddr __read_mostly;
+void *gru_start_vaddr __read_mostly;
 unsigned long gru_end_paddr __read_mostly;
 unsigned int gru_max_gids __read_mostly;
 struct gru_stats_s gru_stats;
@@ -135,11 +136,9 @@ static int gru_create_new_context(unsigned long arg)
 	if (copy_from_user(&req, (void __user *)arg, sizeof(req)))
 		return -EFAULT;
 
-	if (req.data_segment_bytes == 0 ||
-				req.data_segment_bytes > max_user_dsr_bytes)
+	if (req.data_segment_bytes > max_user_dsr_bytes)
 		return -EINVAL;
-	if (!req.control_blocks || !req.maximum_thread_count ||
-				req.control_blocks > max_user_cbrs)
+	if (req.control_blocks > max_user_cbrs || !req.maximum_thread_count)
 		return -EINVAL;
 
 	if (!(req.options & GRU_OPT_MISS_MASK))
@@ -184,41 +183,6 @@ static long gru_get_config_info(unsigned long arg)
 }
 
 /*
- * Get GRU chiplet status
- */
-static long gru_get_chiplet_status(unsigned long arg)
-{
-	struct gru_state *gru;
-	struct gru_chiplet_info info;
-
-	if (copy_from_user(&info, (void __user *)arg, sizeof(info)))
-		return -EFAULT;
-
-	if (info.node == -1)
-		info.node = numa_node_id();
-	if (info.node >= num_possible_nodes() ||
-			info.chiplet >= GRU_CHIPLETS_PER_HUB ||
-			info.node < 0 || info.chiplet < 0)
-		return -EINVAL;
-
-	info.blade = uv_node_to_blade_id(info.node);
-	gru = get_gru(info.blade, info.chiplet);
-
-	info.total_dsr_bytes = GRU_NUM_DSR_BYTES;
-	info.total_cbr = GRU_NUM_CB;
-	info.total_user_dsr_bytes = GRU_NUM_DSR_BYTES -
-		gru->gs_reserved_dsr_bytes;
-	info.total_user_cbr = GRU_NUM_CB - gru->gs_reserved_cbrs;
-	info.free_user_dsr_bytes = hweight64(gru->gs_dsr_map) *
-			GRU_DSR_AU_BYTES;
-	info.free_user_cbr = hweight64(gru->gs_cbr_map) * GRU_CBR_AU_SIZE;
-
-	if (copy_to_user((void __user *)arg, &info, sizeof(info)))
-		return -EFAULT;
-	return 0;
-}
-
-/*
  * gru_file_unlocked_ioctl
  *
  * Called to update file attributes via IOCTL calls.
@@ -234,8 +198,8 @@ static long gru_file_unlocked_ioctl(struct file *file, unsigned int req,
 	case GRU_CREATE_CONTEXT:
 		err = gru_create_new_context(arg);
 		break;
-	case GRU_SET_TASK_SLICE:
-		err = gru_set_task_slice(arg);
+	case GRU_SET_CONTEXT_OPTION:
+		err = gru_set_context_option(arg);
 		break;
 	case GRU_USER_GET_EXCEPTION_DETAIL:
 		err = gru_get_exception_detail(arg);
@@ -243,18 +207,24 @@ static long gru_file_unlocked_ioctl(struct file *file, unsigned int req,
 	case GRU_USER_UNLOAD_CONTEXT:
 		err = gru_user_unload_context(arg);
 		break;
-	case GRU_GET_CHIPLET_STATUS:
-		err = gru_get_chiplet_status(arg);
-		break;
 	case GRU_USER_FLUSH_TLB:
 		err = gru_user_flush_tlb(arg);
 		break;
 	case GRU_USER_CALL_OS:
 		err = gru_handle_user_call_os(arg);
 		break;
+	case GRU_GET_GSEG_STATISTICS:
+		err = gru_get_gseg_statistics(arg);
+		break;
+	case GRU_KTEST:
+		err = gru_ktest(arg);
+		break;
 	case GRU_GET_CONFIG_INFO:
 		err = gru_get_config_info(arg);
 		break;
+	case GRU_DUMP_CHIPLET_STATE:
+		err = gru_dump_chiplet_request(arg);
+		break;
 	}
 	return err;
 }
@@ -282,7 +252,6 @@ static void gru_init_chiplet(struct gru_state *gru, unsigned long paddr,
 	gru_dbg(grudev, "bid %d, nid %d, gid %d, vaddr %p (0x%lx)\n",
 		bid, nid, gru->gs_gid, gru->gs_gru_base_vaddr,
 		gru->gs_gru_base_paddr);
-	gru_kservices_init(gru);
 }
 
 static int gru_init_tables(unsigned long gru_base_paddr, void *gru_base_vaddr)
@@ -309,6 +278,7 @@ static int gru_init_tables(unsigned long gru_base_paddr, void *gru_base_vaddr)
 		memset(gru_base[bid], 0, sizeof(struct gru_blade_state));
 		gru_base[bid]->bs_lru_gru = &gru_base[bid]->bs_grus[0];
 		spin_lock_init(&gru_base[bid]->bs_lock);
+		init_rwsem(&gru_base[bid]->bs_kgts_sema);
 
 		dsrbytes = 0;
 		cbrs = 0;
@@ -372,7 +342,6 @@ static int __init gru_init(void)
 {
 	int ret, irq, chip;
 	char id[10];
-	void *gru_start_vaddr;
 
 	if (!is_uv_system())
 		return 0;
@@ -422,6 +391,7 @@ static int __init gru_init(void)
 		printk(KERN_ERR "%s: init tables failed\n", GRU_DRIVER_ID_STR);
 		goto exit3;
 	}
+	gru_kservices_init();
 
 	printk(KERN_INFO "%s: v%s\n", GRU_DRIVER_ID_STR,
 	       GRU_DRIVER_VERSION_STR);
@@ -440,7 +410,7 @@ exit1:
 
 static void __exit gru_exit(void)
 {
-	int i, bid, gid;
+	int i, bid;
 	int order = get_order(sizeof(struct gru_state) *
 			      GRU_CHIPLETS_PER_BLADE);
 
@@ -449,10 +419,7 @@ static void __exit gru_exit(void)
 
 	for (i = 0; i < GRU_CHIPLETS_PER_BLADE; i++)
 		free_irq(IRQ_GRU + i, NULL);
-
-	foreach_gid(gid)
-		gru_kservices_exit(GID_TO_GRU(gid));
-
+	gru_kservices_exit();
 	for (bid = 0; bid < GRU_MAX_BLADES; bid++)
 		free_pages((unsigned long)gru_base[bid], order);
 
diff --git a/drivers/misc/sgi-gru/gruhandles.c b/drivers/misc/sgi-gru/gruhandles.c
index 9b7ccb32869..37e7cfc53b9 100644
--- a/drivers/misc/sgi-gru/gruhandles.c
+++ b/drivers/misc/sgi-gru/gruhandles.c
@@ -57,7 +57,7 @@ static void start_instruction(void *h)
 static int wait_instruction_complete(void *h, enum mcs_op opc)
 {
 	int status;
-	cycles_t start_time = get_cycles();
+	unsigned long start_time = get_cycles();
 
 	while (1) {
 		cpu_relax();
@@ -65,25 +65,16 @@ static int wait_instruction_complete(void *h, enum mcs_op opc)
 		if (status != CCHSTATUS_ACTIVE)
 			break;
 		if (GRU_OPERATION_TIMEOUT < (get_cycles() - start_time))
-			panic("GRU %p is malfunctioning\n", h);
+			panic("GRU %p is malfunctioning: start %ld, end %ld\n",
+			      h, start_time, (unsigned long)get_cycles());
 	}
 	if (gru_options & OPT_STATS)
 		update_mcs_stats(opc, get_cycles() - start_time);
 	return status;
 }
 
-int cch_allocate(struct gru_context_configuration_handle *cch,
-		int asidval, int sizeavail, unsigned long cbrmap,
-		unsigned long dsrmap)
+int cch_allocate(struct gru_context_configuration_handle *cch)
 {
-	int i;
-
-	for (i = 0; i < 8; i++) {
-		cch->asid[i] = (asidval++);
-		cch->sizeavail[i] = sizeavail;
-	}
-	cch->dsr_allocation_map = dsrmap;
-	cch->cbr_allocation_map = cbrmap;
 	cch->opc = CCHOP_ALLOCATE;
 	start_instruction(cch);
 	return wait_instruction_complete(cch, cchop_allocate);
diff --git a/drivers/misc/sgi-gru/gruhandles.h b/drivers/misc/sgi-gru/gruhandles.h
index 1ed74d7508c..f44112242d0 100644
--- a/drivers/misc/sgi-gru/gruhandles.h
+++ b/drivers/misc/sgi-gru/gruhandles.h
@@ -39,7 +39,6 @@
 #define GRU_NUM_CBE		128
 #define GRU_NUM_TFH		128
 #define GRU_NUM_CCH		16
-#define GRU_NUM_GSH		1
 
 /* Maximum resource counts that can be reserved by user programs */
 #define GRU_NUM_USER_CBR	GRU_NUM_CBE
@@ -56,7 +55,6 @@
 #define GRU_CBE_BASE		(GRU_MCS_BASE + 0x10000)
 #define GRU_TFH_BASE		(GRU_MCS_BASE + 0x18000)
 #define GRU_CCH_BASE		(GRU_MCS_BASE + 0x20000)
-#define GRU_GSH_BASE		(GRU_MCS_BASE + 0x30000)
 
 /* User gseg constants */
 #define GRU_GSEG_STRIDE		(4 * 1024 * 1024)
@@ -251,15 +249,15 @@ struct gru_tlb_fault_handle {
 	unsigned int fill1:9;
 
 	unsigned int status:2;
-	unsigned int fill2:1;
-	unsigned int color:1;
+	unsigned int fill2:2;
 	unsigned int state:3;
 	unsigned int fill3:1;
 
-	unsigned int cause:7;		/* DW 0 - high 32 */
+	unsigned int cause:6;
+	unsigned int cb_int:1;
 	unsigned int fill4:1;
 
-	unsigned int indexway:12;
+	unsigned int indexway:12;	/* DW 0 - high 32 */
 	unsigned int fill5:4;
 
 	unsigned int ctxnum:4;
@@ -457,21 +455,7 @@ enum gru_cbr_state {
 	CBRSTATE_BUSY_INTERRUPT,
 };
 
-/* CBE cbrexecstatus bits */
-#define CBR_EXS_ABORT_OCC_BIT			0
-#define CBR_EXS_INT_OCC_BIT			1
-#define CBR_EXS_PENDING_BIT			2
-#define CBR_EXS_QUEUED_BIT			3
-#define CBR_EXS_TLBHW_BIT			4
-#define CBR_EXS_EXCEPTION_BIT			5
-
-#define CBR_EXS_ABORT_OCC			(1 << CBR_EXS_ABORT_OCC_BIT)
-#define CBR_EXS_INT_OCC				(1 << CBR_EXS_INT_OCC_BIT)
-#define CBR_EXS_PENDING				(1 << CBR_EXS_PENDING_BIT)
-#define CBR_EXS_QUEUED				(1 << CBR_EXS_QUEUED_BIT)
-#define CBR_EXS_TLBHW				(1 << CBR_EXS_TLBHW_BIT)
-#define CBR_EXS_EXCEPTION			(1 << CBR_EXS_EXCEPTION_BIT)
-
+/* CBE cbrexecstatus bits  - defined in gru_instructions.h*/
 /* CBE ecause bits  - defined in gru_instructions.h */
 
 /*
@@ -495,9 +479,7 @@ enum gru_cbr_state {
 /* minimum TLB purge count to ensure a full purge */
 #define GRUMAXINVAL		1024UL
 
-int cch_allocate(struct gru_context_configuration_handle *cch,
-       int asidval, int sizeavail, unsigned long cbrmap, unsigned long dsrmap);
-
+int cch_allocate(struct gru_context_configuration_handle *cch);
 int cch_start(struct gru_context_configuration_handle *cch);
 int cch_interrupt(struct gru_context_configuration_handle *cch);
 int cch_deallocate(struct gru_context_configuration_handle *cch);
diff --git a/drivers/misc/sgi-gru/grukdump.c b/drivers/misc/sgi-gru/grukdump.c
new file mode 100644
index 00000000000..55eabfa8558
--- /dev/null
+++ b/drivers/misc/sgi-gru/grukdump.c
@@ -0,0 +1,232 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *            Dump GRU State
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <asm/uv/uv_hub.h>
+#include "gru.h"
+#include "grutables.h"
+#include "gruhandles.h"
+#include "grulib.h"
+
+#define CCH_LOCK_ATTEMPTS	10
+
+static int gru_user_copy_handle(void __user **dp, void *s)
+{
+	if (copy_to_user(*dp, s, GRU_HANDLE_BYTES))
+		return -1;
+	*dp += GRU_HANDLE_BYTES;
+	return 0;
+}
+
+static int gru_dump_context_data(void *grubase,
+			struct gru_context_configuration_handle *cch,
+			void __user *ubuf, int ctxnum, int dsrcnt)
+{
+	void *cb, *cbe, *tfh, *gseg;
+	int i, scr;
+
+	gseg = grubase + ctxnum * GRU_GSEG_STRIDE;
+	cb = gseg + GRU_CB_BASE;
+	cbe = grubase + GRU_CBE_BASE;
+	tfh = grubase + GRU_TFH_BASE;
+
+	for_each_cbr_in_allocation_map(i, &cch->cbr_allocation_map, scr) {
+		if (gru_user_copy_handle(&ubuf, cb))
+			goto fail;
+		if (gru_user_copy_handle(&ubuf, tfh + i * GRU_HANDLE_STRIDE))
+			goto fail;
+		if (gru_user_copy_handle(&ubuf, cbe + i * GRU_HANDLE_STRIDE))
+			goto fail;
+		cb += GRU_HANDLE_STRIDE;
+	}
+	if (dsrcnt)
+		memcpy(ubuf, gseg + GRU_DS_BASE, dsrcnt * GRU_HANDLE_STRIDE);
+	return 0;
+
+fail:
+	return -EFAULT;
+}
+
+static int gru_dump_tfm(struct gru_state *gru,
+		void __user *ubuf, void __user *ubufend)
+{
+	struct gru_tlb_fault_map *tfm;
+	int i, ret, bytes;
+
+	bytes = GRU_NUM_TFM * GRU_CACHE_LINE_BYTES;
+	if (bytes > ubufend - ubuf)
+		ret = -EFBIG;
+
+	for (i = 0; i < GRU_NUM_TFM; i++) {
+		tfm = get_tfm(gru->gs_gru_base_vaddr, i);
+		if (gru_user_copy_handle(&ubuf, tfm))
+			goto fail;
+	}
+	return GRU_NUM_TFM * GRU_CACHE_LINE_BYTES;
+
+fail:
+	return -EFAULT;
+}
+
+static int gru_dump_tgh(struct gru_state *gru,
+		void __user *ubuf, void __user *ubufend)
+{
+	struct gru_tlb_global_handle *tgh;
+	int i, ret, bytes;
+
+	bytes = GRU_NUM_TGH * GRU_CACHE_LINE_BYTES;
+	if (bytes > ubufend - ubuf)
+		ret = -EFBIG;
+
+	for (i = 0; i < GRU_NUM_TGH; i++) {
+		tgh = get_tgh(gru->gs_gru_base_vaddr, i);
+		if (gru_user_copy_handle(&ubuf, tgh))
+			goto fail;
+	}
+	return GRU_NUM_TGH * GRU_CACHE_LINE_BYTES;
+
+fail:
+	return -EFAULT;
+}
+
+static int gru_dump_context(struct gru_state *gru, int ctxnum,
+		void __user *ubuf, void __user *ubufend, char data_opt,
+		char lock_cch)
+{
+	struct gru_dump_context_header hdr;
+	struct gru_dump_context_header __user *uhdr = ubuf;
+	struct gru_context_configuration_handle *cch, *ubufcch;
+	struct gru_thread_state *gts;
+	int try, cch_locked, cbrcnt = 0, dsrcnt = 0, bytes = 0, ret = 0;
+	void *grubase;
+
+	memset(&hdr, 0, sizeof(hdr));
+	grubase = gru->gs_gru_base_vaddr;
+	cch = get_cch(grubase, ctxnum);
+	for (try = 0; try < CCH_LOCK_ATTEMPTS; try++) {
+		cch_locked =  trylock_cch_handle(cch);
+		if (cch_locked)
+			break;
+		msleep(1);
+	}
+
+	ubuf += sizeof(hdr);
+	ubufcch = ubuf;
+	if (gru_user_copy_handle(&ubuf, cch))
+		goto fail;
+	if (cch_locked)
+		ubufcch->delresp = 0;
+	bytes = sizeof(hdr) + GRU_CACHE_LINE_BYTES;
+
+	if (cch_locked || !lock_cch) {
+		gts = gru->gs_gts[ctxnum];
+		if (gts && gts->ts_vma) {
+			hdr.pid = gts->ts_tgid_owner;
+			hdr.vaddr = gts->ts_vma->vm_start;
+		}
+		if (cch->state != CCHSTATE_INACTIVE) {
+			cbrcnt = hweight64(cch->cbr_allocation_map) *
+						GRU_CBR_AU_SIZE;
+			dsrcnt = data_opt ? hweight32(cch->dsr_allocation_map) *
+						GRU_DSR_AU_CL : 0;
+		}
+		bytes += (3 * cbrcnt + dsrcnt) * GRU_CACHE_LINE_BYTES;
+		if (bytes > ubufend - ubuf)
+			ret = -EFBIG;
+		else
+			ret = gru_dump_context_data(grubase, cch, ubuf, ctxnum,
+							dsrcnt);
+
+	}
+	if (cch_locked)
+		unlock_cch_handle(cch);
+	if (ret)
+		return ret;
+
+	hdr.magic = GRU_DUMP_MAGIC;
+	hdr.gid = gru->gs_gid;
+	hdr.ctxnum = ctxnum;
+	hdr.cbrcnt = cbrcnt;
+	hdr.dsrcnt = dsrcnt;
+	hdr.cch_locked = cch_locked;
+	if (!ret && copy_to_user((void __user *)uhdr, &hdr, sizeof(hdr)))
+		ret = -EFAULT;
+
+	return ret ? ret : bytes;
+
+fail:
+	unlock_cch_handle(cch);
+	return -EFAULT;
+}
+
+int gru_dump_chiplet_request(unsigned long arg)
+{
+	struct gru_state *gru;
+	struct gru_dump_chiplet_state_req req;
+	void __user *ubuf;
+	void __user *ubufend;
+	int ctxnum, ret, cnt = 0;
+
+	if (copy_from_user(&req, (void __user *)arg, sizeof(req)))
+		return -EFAULT;
+
+	/* Currently, only dump by gid is implemented */
+	if (req.gid >= gru_max_gids || req.gid < 0)
+		return -EINVAL;
+
+	gru = GID_TO_GRU(req.gid);
+	ubuf = req.buf;
+	ubufend = req.buf + req.buflen;
+
+	ret = gru_dump_tfm(gru, ubuf, ubufend);
+	if (ret < 0)
+		goto fail;
+	ubuf += ret;
+
+	ret = gru_dump_tgh(gru, ubuf, ubufend);
+	if (ret < 0)
+		goto fail;
+	ubuf += ret;
+
+	for (ctxnum = 0; ctxnum < GRU_NUM_CCH; ctxnum++) {
+		if (req.ctxnum == ctxnum || req.ctxnum < 0) {
+			ret = gru_dump_context(gru, ctxnum, ubuf, ubufend,
+						req.data_opt, req.lock_cch);
+			if (ret < 0)
+				goto fail;
+			ubuf += ret;
+			cnt++;
+		}
+	}
+
+	if (copy_to_user((void __user *)arg, &req, sizeof(req)))
+		return -EFAULT;
+	return cnt;
+
+fail:
+	return ret;
+}
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
index d8bd7d84a7c..eedbf9c3276 100644
--- a/drivers/misc/sgi-gru/grukservices.c
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -31,6 +31,7 @@
 #include <linux/proc_fs.h>
 #include <linux/interrupt.h>
 #include <linux/uaccess.h>
+#include <linux/delay.h>
 #include "gru.h"
 #include "grulib.h"
 #include "grutables.h"
@@ -45,18 +46,66 @@
  * resources. This will likely be replaced when we better understand the
  * kernel/user requirements.
  *
- * At boot time, the kernel permanently reserves a fixed number of
- * CBRs/DSRs for each cpu to use. The resources are all taken from
- * the GRU chiplet 1 on the blade. This leaves the full set of resources
- * of chiplet 0 available to be allocated to a single user.
+ * Blade percpu resources reserved for kernel use. These resources are
+ * reserved whenever the the kernel context for the blade is loaded. Note
+ * that the kernel context is not guaranteed to be always available. It is
+ * loaded on demand & can be stolen by a user if the user demand exceeds the
+ * kernel demand. The kernel can always reload the kernel context but
+ * a SLEEP may be required!!!.
+ *
+ * Async Overview:
+ *
+ * 	Each blade has one "kernel context" that owns GRU kernel resources
+ * 	located on the blade. Kernel drivers use GRU resources in this context
+ * 	for sending messages, zeroing memory, etc.
+ *
+ * 	The kernel context is dynamically loaded on demand. If it is not in
+ * 	use by the kernel, the kernel context can be unloaded & given to a user.
+ * 	The kernel context will be reloaded when needed. This may require that
+ * 	a context be stolen from a user.
+ * 		NOTE: frequent unloading/reloading of the kernel context is
+ * 		expensive. We are depending on batch schedulers, cpusets, sane
+ * 		drivers or some other mechanism to prevent the need for frequent
+ *	 	stealing/reloading.
+ *
+ * 	The kernel context consists of two parts:
+ * 		- 1 CB & a few DSRs that are reserved for each cpu on the blade.
+ * 		  Each cpu has it's own private resources & does not share them
+ * 		  with other cpus. These resources are used serially, ie,
+ * 		  locked, used & unlocked  on each call to a function in
+ * 		  grukservices.
+ * 		  	(Now that we have dynamic loading of kernel contexts, I
+ * 		  	 may rethink this & allow sharing between cpus....)
+ *
+ *		- Additional resources can be reserved long term & used directly
+ *		  by UV drivers located in the kernel. Drivers using these GRU
+ *		  resources can use asynchronous GRU instructions that send
+ *		  interrupts on completion.
+ *		  	- these resources must be explicitly locked/unlocked
+ *		  	- locked resources prevent (obviously) the kernel
+ *		  	  context from being unloaded.
+ *			- drivers using these resource directly issue their own
+ *			  GRU instruction and must wait/check completion.
+ *
+ * 		  When these resources are reserved, the caller can optionally
+ * 		  associate a wait_queue with the resources and use asynchronous
+ * 		  GRU instructions. When an async GRU instruction completes, the
+ * 		  driver will do a wakeup on the event.
+ *
  */
 
-/* Blade percpu resources PERMANENTLY reserved for kernel use */
+
+#define ASYNC_HAN_TO_BID(h)	((h) - 1)
+#define ASYNC_BID_TO_HAN(b)	((b) + 1)
+#define ASYNC_HAN_TO_BS(h)	gru_base[ASYNC_HAN_TO_BID(h)]
+#define KCB_TO_GID(cb)		((cb - gru_start_vaddr) /		\
+					(GRU_SIZE * GRU_CHIPLETS_PER_BLADE))
+#define KCB_TO_BS(cb)		gru_base[KCB_TO_GID(cb)]
+
 #define GRU_NUM_KERNEL_CBR	1
 #define GRU_NUM_KERNEL_DSR_BYTES 256
 #define GRU_NUM_KERNEL_DSR_CL	(GRU_NUM_KERNEL_DSR_BYTES /		\
 					GRU_CACHE_LINE_BYTES)
-#define KERNEL_CTXNUM           15
 
 /* GRU instruction attributes for all instructions */
 #define IMA			IMA_CB_DELAY
@@ -98,6 +147,108 @@ struct message_header {
 
 #define HSTATUS(mq, h)	((mq) + offsetof(struct message_queue, hstatus[h]))
 
+/*
+ * Reload the blade's kernel context into a GRU chiplet. Called holding
+ * the bs_kgts_sema for READ. Will steal user contexts if necessary.
+ */
+static void gru_load_kernel_context(struct gru_blade_state *bs, int blade_id)
+{
+	struct gru_state *gru;
+	struct gru_thread_state *kgts;
+	void *vaddr;
+	int ctxnum, ncpus;
+
+	up_read(&bs->bs_kgts_sema);
+	down_write(&bs->bs_kgts_sema);
+
+	if (!bs->bs_kgts)
+		bs->bs_kgts = gru_alloc_gts(NULL, 0, 0, 0, 0);
+	kgts = bs->bs_kgts;
+
+	if (!kgts->ts_gru) {
+		STAT(load_kernel_context);
+		ncpus = uv_blade_nr_possible_cpus(blade_id);
+		kgts->ts_cbr_au_count = GRU_CB_COUNT_TO_AU(
+			GRU_NUM_KERNEL_CBR * ncpus + bs->bs_async_cbrs);
+		kgts->ts_dsr_au_count = GRU_DS_BYTES_TO_AU(
+			GRU_NUM_KERNEL_DSR_BYTES * ncpus +
+				bs->bs_async_dsr_bytes);
+		while (!gru_assign_gru_context(kgts, blade_id)) {
+			msleep(1);
+			gru_steal_context(kgts, blade_id);
+		}
+		gru_load_context(kgts);
+		gru = bs->bs_kgts->ts_gru;
+		vaddr = gru->gs_gru_base_vaddr;
+		ctxnum = kgts->ts_ctxnum;
+		bs->kernel_cb = get_gseg_base_address_cb(vaddr, ctxnum, 0);
+		bs->kernel_dsr = get_gseg_base_address_ds(vaddr, ctxnum, 0);
+	}
+	downgrade_write(&bs->bs_kgts_sema);
+}
+
+/*
+ * Free all kernel contexts that are not currently in use.
+ *   Returns 0 if all freed, else number of inuse context.
+ */
+static int gru_free_kernel_contexts(void)
+{
+	struct gru_blade_state *bs;
+	struct gru_thread_state *kgts;
+	int bid, ret = 0;
+
+	for (bid = 0; bid < GRU_MAX_BLADES; bid++) {
+		bs = gru_base[bid];
+		if (!bs)
+			continue;
+		if (down_write_trylock(&bs->bs_kgts_sema)) {
+			kgts = bs->bs_kgts;
+			if (kgts && kgts->ts_gru)
+				gru_unload_context(kgts, 0);
+			kfree(kgts);
+			bs->bs_kgts = NULL;
+			up_write(&bs->bs_kgts_sema);
+		} else {
+			ret++;
+		}
+	}
+	return ret;
+}
+
+/*
+ * Lock & load the kernel context for the specified blade.
+ */
+static struct gru_blade_state *gru_lock_kernel_context(int blade_id)
+{
+	struct gru_blade_state *bs;
+
+	STAT(lock_kernel_context);
+	bs = gru_base[blade_id];
+
+	down_read(&bs->bs_kgts_sema);
+	if (!bs->bs_kgts || !bs->bs_kgts->ts_gru)
+		gru_load_kernel_context(bs, blade_id);
+	return bs;
+
+}
+
+/*
+ * Unlock the kernel context for the specified blade. Context is not
+ * unloaded but may be stolen before next use.
+ */
+static void gru_unlock_kernel_context(int blade_id)
+{
+	struct gru_blade_state *bs;
+
+	bs = gru_base[blade_id];
+	up_read(&bs->bs_kgts_sema);
+	STAT(unlock_kernel_context);
+}
+
+/*
+ * Reserve & get pointers to the DSR/CBRs reserved for the current cpu.
+ * 	- returns with preemption disabled
+ */
 static int gru_get_cpu_resources(int dsr_bytes, void **cb, void **dsr)
 {
 	struct gru_blade_state *bs;
@@ -105,30 +256,148 @@ static int gru_get_cpu_resources(int dsr_bytes, void **cb, void **dsr)
 
 	BUG_ON(dsr_bytes > GRU_NUM_KERNEL_DSR_BYTES);
 	preempt_disable();
-	bs = gru_base[uv_numa_blade_id()];
+	bs = gru_lock_kernel_context(uv_numa_blade_id());
 	lcpu = uv_blade_processor_id();
 	*cb = bs->kernel_cb + lcpu * GRU_HANDLE_STRIDE;
 	*dsr = bs->kernel_dsr + lcpu * GRU_NUM_KERNEL_DSR_BYTES;
 	return 0;
 }
 
+/*
+ * Free the current cpus reserved DSR/CBR resources.
+ */
 static void gru_free_cpu_resources(void *cb, void *dsr)
 {
+	gru_unlock_kernel_context(uv_numa_blade_id());
 	preempt_enable();
 }
 
+/*
+ * Reserve GRU resources to be used asynchronously.
+ *   Note: currently supports only 1 reservation per blade.
+ *
+ * 	input:
+ * 		blade_id  - blade on which resources should be reserved
+ * 		cbrs	  - number of CBRs
+ * 		dsr_bytes - number of DSR bytes needed
+ *	output:
+ *		handle to identify resource
+ *		(0 = async resources already reserved)
+ */
+unsigned long gru_reserve_async_resources(int blade_id, int cbrs, int dsr_bytes,
+			struct completion *cmp)
+{
+	struct gru_blade_state *bs;
+	struct gru_thread_state *kgts;
+	int ret = 0;
+
+	bs = gru_base[blade_id];
+
+	down_write(&bs->bs_kgts_sema);
+
+	/* Verify no resources already reserved */
+	if (bs->bs_async_dsr_bytes + bs->bs_async_cbrs)
+		goto done;
+	bs->bs_async_dsr_bytes = dsr_bytes;
+	bs->bs_async_cbrs = cbrs;
+	bs->bs_async_wq = cmp;
+	kgts = bs->bs_kgts;
+
+	/* Resources changed. Unload context if already loaded */
+	if (kgts && kgts->ts_gru)
+		gru_unload_context(kgts, 0);
+	ret = ASYNC_BID_TO_HAN(blade_id);
+
+done:
+	up_write(&bs->bs_kgts_sema);
+	return ret;
+}
+
+/*
+ * Release async resources previously reserved.
+ *
+ *	input:
+ *		han - handle to identify resources
+ */
+void gru_release_async_resources(unsigned long han)
+{
+	struct gru_blade_state *bs = ASYNC_HAN_TO_BS(han);
+
+	down_write(&bs->bs_kgts_sema);
+	bs->bs_async_dsr_bytes = 0;
+	bs->bs_async_cbrs = 0;
+	bs->bs_async_wq = NULL;
+	up_write(&bs->bs_kgts_sema);
+}
+
+/*
+ * Wait for async GRU instructions to complete.
+ *
+ *	input:
+ *		han - handle to identify resources
+ */
+void gru_wait_async_cbr(unsigned long han)
+{
+	struct gru_blade_state *bs = ASYNC_HAN_TO_BS(han);
+
+	wait_for_completion(bs->bs_async_wq);
+	mb();
+}
+
+/*
+ * Lock previous reserved async GRU resources
+ *
+ *	input:
+ *		han - handle to identify resources
+ *	output:
+ *		cb  - pointer to first CBR
+ *		dsr - pointer to first DSR
+ */
+void gru_lock_async_resource(unsigned long han,  void **cb, void **dsr)
+{
+	struct gru_blade_state *bs = ASYNC_HAN_TO_BS(han);
+	int blade_id = ASYNC_HAN_TO_BID(han);
+	int ncpus;
+
+	gru_lock_kernel_context(blade_id);
+	ncpus = uv_blade_nr_possible_cpus(blade_id);
+	if (cb)
+		*cb = bs->kernel_cb + ncpus * GRU_HANDLE_STRIDE;
+	if (dsr)
+		*dsr = bs->kernel_dsr + ncpus * GRU_NUM_KERNEL_DSR_BYTES;
+}
+
+/*
+ * Unlock previous reserved async GRU resources
+ *
+ *	input:
+ *		han - handle to identify resources
+ */
+void gru_unlock_async_resource(unsigned long han)
+{
+	int blade_id = ASYNC_HAN_TO_BID(han);
+
+	gru_unlock_kernel_context(blade_id);
+}
+
+/*----------------------------------------------------------------------*/
 int gru_get_cb_exception_detail(void *cb,
 		struct control_block_extended_exc_detail *excdet)
 {
 	struct gru_control_block_extended *cbe;
+	struct gru_blade_state *bs;
+	int cbrnum;
 
-	cbe = get_cbe(GRUBASE(cb), get_cb_number(cb));
-	prefetchw(cbe);	/* Harmless on hardware, required for emulator */
+	bs = KCB_TO_BS(cb);
+	cbrnum = thread_cbr_number(bs->bs_kgts, get_cb_number(cb));
+	cbe = get_cbe(GRUBASE(cb), cbrnum);
+	gru_flush_cache(cbe);	/* CBE not coherent */
 	excdet->opc = cbe->opccpy;
 	excdet->exopc = cbe->exopccpy;
 	excdet->ecause = cbe->ecause;
 	excdet->exceptdet0 = cbe->idef1upd;
 	excdet->exceptdet1 = cbe->idef3upd;
+	gru_flush_cache(cbe);
 	return 0;
 }
 
@@ -167,13 +436,13 @@ static int gru_retry_exception(void *cb)
 	int retry = EXCEPTION_RETRY_LIMIT;
 
 	while (1)  {
-		if (gru_get_cb_message_queue_substatus(cb))
-			break;
 		if (gru_wait_idle_or_exception(gen) == CBS_IDLE)
 			return CBS_IDLE;
-
+		if (gru_get_cb_message_queue_substatus(cb))
+			return CBS_EXCEPTION;
 		gru_get_cb_exception_detail(cb, &excdet);
-		if (excdet.ecause & ~EXCEPTION_RETRY_BITS)
+		if ((excdet.ecause & ~EXCEPTION_RETRY_BITS) ||
+				(excdet.cbrexecstatus & CBR_EXS_ABORT_OCC))
 			break;
 		if (retry-- == 0)
 			break;
@@ -416,6 +685,29 @@ static void send_message_queue_interrupt(struct gru_message_queue_desc *mqd)
 				mqd->interrupt_vector);
 }
 
+/*
+ * Handle a PUT failure. Note: if message was a 2-line message, one of the
+ * lines might have successfully have been written. Before sending the
+ * message, "present" must be cleared in BOTH lines to prevent the receiver
+ * from prematurely seeing the full message.
+ */
+static int send_message_put_nacked(void *cb, struct gru_message_queue_desc *mqd,
+			void *mesg, int lines)
+{
+	unsigned long m;
+
+	m = mqd->mq_gpa + (gru_get_amo_value_head(cb) << 6);
+	if (lines == 2) {
+		gru_vset(cb, m, 0, XTYPE_CL, lines, 1, IMA);
+		if (gru_wait(cb) != CBS_IDLE)
+			return MQE_UNEXPECTED_CB_ERR;
+	}
+	gru_vstore(cb, m, gru_get_tri(mesg), XTYPE_CL, lines, 1, IMA);
+	if (gru_wait(cb) != CBS_IDLE)
+		return MQE_UNEXPECTED_CB_ERR;
+	send_message_queue_interrupt(mqd);
+	return MQE_OK;
+}
 
 /*
  * Handle a gru_mesq failure. Some of these failures are software recoverable
@@ -425,7 +717,6 @@ static int send_message_failure(void *cb, struct gru_message_queue_desc *mqd,
 				void *mesg, int lines)
 {
 	int substatus, ret = 0;
-	unsigned long m;
 
 	substatus = gru_get_cb_message_queue_substatus(cb);
 	switch (substatus) {
@@ -447,14 +738,7 @@ static int send_message_failure(void *cb, struct gru_message_queue_desc *mqd,
 		break;
 	case CBSS_PUT_NACKED:
 		STAT(mesq_send_put_nacked);
-		m = mqd->mq_gpa + (gru_get_amo_value_head(cb) << 6);
-		gru_vstore(cb, m, gru_get_tri(mesg), XTYPE_CL, lines, 1, IMA);
-		if (gru_wait(cb) == CBS_IDLE) {
-			ret = MQE_OK;
-			send_message_queue_interrupt(mqd);
-		} else {
-			ret = MQE_UNEXPECTED_CB_ERR;
-		}
+		ret = send_message_put_nacked(cb, mqd, mesg, lines);
 		break;
 	default:
 		BUG();
@@ -597,115 +881,177 @@ EXPORT_SYMBOL_GPL(gru_copy_gpa);
 
 /* ------------------- KERNEL QUICKTESTS RUN AT STARTUP ----------------*/
 /* 	Temp - will delete after we gain confidence in the GRU		*/
-static __cacheline_aligned unsigned long word0;
-static __cacheline_aligned unsigned long word1;
 
-static int quicktest(struct gru_state *gru)
+static int quicktest0(unsigned long arg)
 {
+	unsigned long word0;
+	unsigned long word1;
 	void *cb;
-	void *ds;
+	void *dsr;
 	unsigned long *p;
+	int ret = -EIO;
 
-	cb = get_gseg_base_address_cb(gru->gs_gru_base_vaddr, KERNEL_CTXNUM, 0);
-	ds = get_gseg_base_address_ds(gru->gs_gru_base_vaddr, KERNEL_CTXNUM, 0);
-	p = ds;
+	if (gru_get_cpu_resources(GRU_CACHE_LINE_BYTES, &cb, &dsr))
+		return MQE_BUG_NO_RESOURCES;
+	p = dsr;
 	word0 = MAGIC;
+	word1 = 0;
 
-	gru_vload(cb, uv_gpa(&word0), 0, XTYPE_DW, 1, 1, IMA);
-	if (gru_wait(cb) != CBS_IDLE)
-		BUG();
+	gru_vload(cb, uv_gpa(&word0), gru_get_tri(dsr), XTYPE_DW, 1, 1, IMA);
+	if (gru_wait(cb) != CBS_IDLE) {
+		printk(KERN_DEBUG "GRU quicktest0: CBR failure 1\n");
+		goto done;
+	}
 
-	if (*(unsigned long *)ds != MAGIC)
-		BUG();
-	gru_vstore(cb, uv_gpa(&word1), 0, XTYPE_DW, 1, 1, IMA);
-	if (gru_wait(cb) != CBS_IDLE)
-		BUG();
+	if (*p != MAGIC) {
+		printk(KERN_DEBUG "GRU: quicktest0 bad magic 0x%lx\n", *p);
+		goto done;
+	}
+	gru_vstore(cb, uv_gpa(&word1), gru_get_tri(dsr), XTYPE_DW, 1, 1, IMA);
+	if (gru_wait(cb) != CBS_IDLE) {
+		printk(KERN_DEBUG "GRU quicktest0: CBR failure 2\n");
+		goto done;
+	}
 
-	if (word0 != word1 || word0 != MAGIC) {
-		printk
-		    ("GRU quicktest err: gid %d, found 0x%lx, expected 0x%lx\n",
-		     gru->gs_gid, word1, MAGIC);
-		BUG();		/* ZZZ should not be fatal */
+	if (word0 != word1 || word1 != MAGIC) {
+		printk(KERN_DEBUG
+		       "GRU quicktest0 err: found 0x%lx, expected 0x%lx\n",
+		     word1, MAGIC);
+		goto done;
 	}
+	ret = 0;
 
-	return 0;
+done:
+	gru_free_cpu_resources(cb, dsr);
+	return ret;
 }
 
+#define ALIGNUP(p, q)	((void *)(((unsigned long)(p) + (q) - 1) & ~(q - 1)))
 
-int gru_kservices_init(struct gru_state *gru)
+static int quicktest1(unsigned long arg)
 {
-	struct gru_blade_state *bs;
-	struct gru_context_configuration_handle *cch;
-	unsigned long cbr_map, dsr_map;
-	int err, num, cpus_possible;
-
-	/*
-	 * Currently, resources are reserved ONLY on the second chiplet
-	 * on each blade. This leaves ALL resources on chiplet 0 available
-	 * for user code.
-	 */
-	bs = gru->gs_blade;
-	if (gru != &bs->bs_grus[1])
-		return 0;
-
-	cpus_possible = uv_blade_nr_possible_cpus(gru->gs_blade_id);
-
-	num = GRU_NUM_KERNEL_CBR * cpus_possible;
-	cbr_map = gru_reserve_cb_resources(gru, GRU_CB_COUNT_TO_AU(num), NULL);
-	gru->gs_reserved_cbrs += num;
-
-	num = GRU_NUM_KERNEL_DSR_BYTES * cpus_possible;
-	dsr_map = gru_reserve_ds_resources(gru, GRU_DS_BYTES_TO_AU(num), NULL);
-	gru->gs_reserved_dsr_bytes += num;
-
-	gru->gs_active_contexts++;
-	__set_bit(KERNEL_CTXNUM, &gru->gs_context_map);
-	cch = get_cch(gru->gs_gru_base_vaddr, KERNEL_CTXNUM);
-
-	bs->kernel_cb = get_gseg_base_address_cb(gru->gs_gru_base_vaddr,
-					KERNEL_CTXNUM, 0);
-	bs->kernel_dsr = get_gseg_base_address_ds(gru->gs_gru_base_vaddr,
-					KERNEL_CTXNUM, 0);
-
-	lock_cch_handle(cch);
-	cch->tfm_fault_bit_enable = 0;
-	cch->tlb_int_enable = 0;
-	cch->tfm_done_bit_enable = 0;
-	cch->unmap_enable = 1;
-	err = cch_allocate(cch, 0, 0, cbr_map, dsr_map);
-	if (err) {
-		gru_dbg(grudev,
-			"Unable to allocate kernel CCH: gid %d, err %d\n",
-			gru->gs_gid, err);
-		BUG();
+	struct gru_message_queue_desc mqd;
+	void *p, *mq;
+	unsigned long *dw;
+	int i, ret = -EIO;
+	char mes[GRU_CACHE_LINE_BYTES], *m;
+
+	/* Need  1K cacheline aligned that does not cross page boundary */
+	p = kmalloc(4096, 0);
+	mq = ALIGNUP(p, 1024);
+	memset(mes, 0xee, sizeof(mes));
+	dw = mq;
+
+	gru_create_message_queue(&mqd, mq, 8 * GRU_CACHE_LINE_BYTES, 0, 0, 0);
+	for (i = 0; i < 6; i++) {
+		mes[8] = i;
+		do {
+			ret = gru_send_message_gpa(&mqd, mes, sizeof(mes));
+		} while (ret == MQE_CONGESTION);
+		if (ret)
+			break;
 	}
-	if (cch_start(cch)) {
-		gru_dbg(grudev, "Unable to start kernel CCH: gid %d, err %d\n",
-			gru->gs_gid, err);
-		BUG();
+	if (ret != MQE_QUEUE_FULL || i != 4)
+		goto done;
+
+	for (i = 0; i < 6; i++) {
+		m = gru_get_next_message(&mqd);
+		if (!m || m[8] != i)
+			break;
+		gru_free_message(&mqd, m);
 	}
-	unlock_cch_handle(cch);
+	ret = (i == 4) ? 0 : -EIO;
 
-	if (gru_options & GRU_QUICKLOOK)
-		quicktest(gru);
-	return 0;
+done:
+	kfree(p);
+	return ret;
 }
 
-void gru_kservices_exit(struct gru_state *gru)
+static int quicktest2(unsigned long arg)
 {
-	struct gru_context_configuration_handle *cch;
-	struct gru_blade_state *bs;
+	static DECLARE_COMPLETION(cmp);
+	unsigned long han;
+	int blade_id = 0;
+	int numcb = 4;
+	int ret = 0;
+	unsigned long *buf;
+	void *cb0, *cb;
+	int i, k, istatus, bytes;
+
+	bytes = numcb * 4 * 8;
+	buf = kmalloc(bytes, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = -EBUSY;
+	han = gru_reserve_async_resources(blade_id, numcb, 0, &cmp);
+	if (!han)
+		goto done;
+
+	gru_lock_async_resource(han, &cb0, NULL);
+	memset(buf, 0xee, bytes);
+	for (i = 0; i < numcb; i++)
+		gru_vset(cb0 + i * GRU_HANDLE_STRIDE, uv_gpa(&buf[i * 4]), 0,
+				XTYPE_DW, 4, 1, IMA_INTERRUPT);
+
+	ret = 0;
+	for (k = 0; k < numcb; k++) {
+		gru_wait_async_cbr(han);
+		for (i = 0; i < numcb; i++) {
+			cb = cb0 + i * GRU_HANDLE_STRIDE;
+			istatus = gru_check_status(cb);
+			if (istatus == CBS_ACTIVE)
+				continue;
+			if (istatus == CBS_EXCEPTION)
+				ret = -EFAULT;
+			else if (buf[i] || buf[i + 1] || buf[i + 2] ||
+					buf[i + 3])
+				ret = -EIO;
+		}
+	}
+	BUG_ON(cmp.done);
 
-	bs = gru->gs_blade;
-	if (gru != &bs->bs_grus[1])
-		return;
+	gru_unlock_async_resource(han);
+	gru_release_async_resources(han);
+done:
+	kfree(buf);
+	return ret;
+}
 
-	cch = get_cch(gru->gs_gru_base_vaddr, KERNEL_CTXNUM);
-	lock_cch_handle(cch);
-	if (cch_interrupt_sync(cch))
-		BUG();
-	if (cch_deallocate(cch))
+/*
+ * Debugging only. User hook for various kernel tests
+ * of driver & gru.
+ */
+int gru_ktest(unsigned long arg)
+{
+	int ret = -EINVAL;
+
+	switch (arg & 0xff) {
+	case 0:
+		ret = quicktest0(arg);
+		break;
+	case 1:
+		ret = quicktest1(arg);
+		break;
+	case 2:
+		ret = quicktest2(arg);
+		break;
+	case 99:
+		ret = gru_free_kernel_contexts();
+		break;
+	}
+	return ret;
+
+}
+
+int gru_kservices_init(void)
+{
+	return 0;
+}
+
+void gru_kservices_exit(void)
+{
+	if (gru_free_kernel_contexts())
 		BUG();
-	unlock_cch_handle(cch);
 }
 
diff --git a/drivers/misc/sgi-gru/grukservices.h b/drivers/misc/sgi-gru/grukservices.h
index 747ed315d56..d60d34bca44 100644
--- a/drivers/misc/sgi-gru/grukservices.h
+++ b/drivers/misc/sgi-gru/grukservices.h
@@ -146,4 +146,55 @@ extern void *gru_get_next_message(struct gru_message_queue_desc *mqd);
 extern int gru_copy_gpa(unsigned long dest_gpa, unsigned long src_gpa,
 							unsigned int bytes);
 
+/*
+ * Reserve GRU resources to be used asynchronously.
+ *
+ * 	input:
+ * 		blade_id  - blade on which resources should be reserved
+ * 		cbrs	  - number of CBRs
+ * 		dsr_bytes - number of DSR bytes needed
+ * 		cmp	  - completion structure for waiting for
+ * 			    async completions
+ *	output:
+ *		handle to identify resource
+ *		(0 = no resources)
+ */
+extern unsigned long gru_reserve_async_resources(int blade_id, int cbrs, int dsr_bytes,
+				struct completion *cmp);
+
+/*
+ * Release async resources previously reserved.
+ *
+ *	input:
+ *		han - handle to identify resources
+ */
+extern void gru_release_async_resources(unsigned long han);
+
+/*
+ * Wait for async GRU instructions to complete.
+ *
+ *	input:
+ *		han - handle to identify resources
+ */
+extern void gru_wait_async_cbr(unsigned long han);
+
+/*
+ * Lock previous reserved async GRU resources
+ *
+ *	input:
+ *		han - handle to identify resources
+ *	output:
+ *		cb  - pointer to first CBR
+ *		dsr - pointer to first DSR
+ */
+extern void gru_lock_async_resource(unsigned long han,  void **cb, void **dsr);
+
+/*
+ * Unlock previous reserved async GRU resources
+ *
+ *	input:
+ *		han - handle to identify resources
+ */
+extern void gru_unlock_async_resource(unsigned long han);
+
 #endif 		/* __GRU_KSERVICES_H_ */
diff --git a/drivers/misc/sgi-gru/grulib.h b/drivers/misc/sgi-gru/grulib.h
index e56e196a699..889bc442a3e 100644
--- a/drivers/misc/sgi-gru/grulib.h
+++ b/drivers/misc/sgi-gru/grulib.h
@@ -32,8 +32,8 @@
 /* Set Number of Request Blocks */
 #define GRU_CREATE_CONTEXT		_IOWR(GRU_IOCTL_NUM, 1, void *)
 
-/* Register task as using the slice */
-#define GRU_SET_TASK_SLICE		_IOWR(GRU_IOCTL_NUM, 5, void *)
+/*  Set Context Options */
+#define GRU_SET_CONTEXT_OPTION		_IOWR(GRU_IOCTL_NUM, 4, void *)
 
 /* Fetch exception detail */
 #define GRU_USER_GET_EXCEPTION_DETAIL	_IOWR(GRU_IOCTL_NUM, 6, void *)
@@ -44,8 +44,11 @@
 /* For user unload context */
 #define GRU_USER_UNLOAD_CONTEXT		_IOWR(GRU_IOCTL_NUM, 9, void *)
 
-/* For fetching GRU chiplet status */
-#define GRU_GET_CHIPLET_STATUS		_IOWR(GRU_IOCTL_NUM, 10, void *)
+/* For dumpping GRU chiplet state */
+#define GRU_DUMP_CHIPLET_STATE		_IOWR(GRU_IOCTL_NUM, 11, void *)
+
+/* For getting gseg statistics */
+#define GRU_GET_GSEG_STATISTICS		_IOWR(GRU_IOCTL_NUM, 12, void *)
 
 /* For user TLB flushing (primarily for tests) */
 #define GRU_USER_FLUSH_TLB		_IOWR(GRU_IOCTL_NUM, 50, void *)
@@ -53,8 +56,26 @@
 /* Get some config options (primarily for tests & emulator) */
 #define GRU_GET_CONFIG_INFO		_IOWR(GRU_IOCTL_NUM, 51, void *)
 
+/* Various kernel self-tests */
+#define GRU_KTEST			_IOWR(GRU_IOCTL_NUM, 52, void *)
+
 #define CONTEXT_WINDOW_BYTES(th)        (GRU_GSEG_PAGESIZE * (th))
 #define THREAD_POINTER(p, th)		(p + GRU_GSEG_PAGESIZE * (th))
+#define GSEG_START(cb)			((void *)((unsigned long)(cb) & ~(GRU_GSEG_PAGESIZE - 1)))
+
+/*
+ * Statictics kept on a per-GTS basis.
+ */
+struct gts_statistics {
+	unsigned long	fmm_tlbdropin;
+	unsigned long	upm_tlbdropin;
+	unsigned long	context_stolen;
+};
+
+struct gru_get_gseg_statistics_req {
+	unsigned long		gseg;
+	struct gts_statistics	stats;
+};
 
 /*
  * Structure used to pass TLB flush parameters to the driver
@@ -75,6 +96,16 @@ struct gru_unload_context_req {
 };
 
 /*
+ * Structure used to set context options
+ */
+enum {sco_gseg_owner, sco_cch_req_slice};
+struct gru_set_context_option_req {
+	unsigned long	gseg;
+	int		op;
+	unsigned long	val1;
+};
+
+/*
  * Structure used to pass TLB flush parameters to the driver
  */
 struct gru_flush_tlb_req {
@@ -84,6 +115,36 @@ struct gru_flush_tlb_req {
 };
 
 /*
+ * Structure used to pass TLB flush parameters to the driver
+ */
+enum {dcs_pid, dcs_gid};
+struct gru_dump_chiplet_state_req {
+	unsigned int	op;
+	unsigned int	gid;
+	int		ctxnum;
+	char		data_opt;
+	char		lock_cch;
+	pid_t		pid;
+	void		*buf;
+	size_t		buflen;
+	/* ---- output --- */
+	unsigned int	num_contexts;
+};
+
+#define GRU_DUMP_MAGIC	0x3474ab6c
+struct gru_dump_context_header {
+	unsigned int	magic;
+	unsigned int	gid;
+	unsigned char	ctxnum;
+	unsigned char	cbrcnt;
+	unsigned char	dsrcnt;
+	pid_t		pid;
+	unsigned long	vaddr;
+	int		cch_locked;
+	unsigned long	data[0];
+};
+
+/*
  * GRU configuration info (temp - for testing)
  */
 struct gru_config_info {
diff --git a/drivers/misc/sgi-gru/grumain.c b/drivers/misc/sgi-gru/grumain.c
index ec3f7a17d22..3bc643dad60 100644
--- a/drivers/misc/sgi-gru/grumain.c
+++ b/drivers/misc/sgi-gru/grumain.c
@@ -3,11 +3,21 @@
  *
  *            DRIVER TABLE MANAGER + GRU CONTEXT LOAD/UNLOAD
  *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
  *
- * Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
 #include <linux/kernel.h>
@@ -96,7 +106,7 @@ static int gru_reset_asid_limit(struct gru_state *gru, int asid)
 	gid = gru->gs_gid;
 again:
 	for (i = 0; i < GRU_NUM_CCH; i++) {
-		if (!gru->gs_gts[i])
+		if (!gru->gs_gts[i] || is_kernel_context(gru->gs_gts[i]))
 			continue;
 		inuse_asid = gru->gs_gts[i]->ts_gms->ms_asids[gid].mt_asid;
 		gru_dbg(grudev, "gid %d, gts %p, gms %p, inuse 0x%x, cxt %d\n",
@@ -150,7 +160,7 @@ static unsigned long reserve_resources(unsigned long *p, int n, int mmax,
 	unsigned long bits = 0;
 	int i;
 
-	do {
+	while (n--) {
 		i = find_first_bit(p, mmax);
 		if (i == mmax)
 			BUG();
@@ -158,7 +168,7 @@ static unsigned long reserve_resources(unsigned long *p, int n, int mmax,
 		__set_bit(i, &bits);
 		if (idx)
 			*idx++ = i;
-	} while (--n);
+	}
 	return bits;
 }
 
@@ -299,38 +309,39 @@ static struct gru_thread_state *gru_find_current_gts_nolock(struct gru_vma_data
 /*
  * Allocate a thread state structure.
  */
-static struct gru_thread_state *gru_alloc_gts(struct vm_area_struct *vma,
-					      struct gru_vma_data *vdata,
-					      int tsid)
+struct gru_thread_state *gru_alloc_gts(struct vm_area_struct *vma,
+		int cbr_au_count, int dsr_au_count, int options, int tsid)
 {
 	struct gru_thread_state *gts;
 	int bytes;
 
-	bytes = DSR_BYTES(vdata->vd_dsr_au_count) +
-				CBR_BYTES(vdata->vd_cbr_au_count);
+	bytes = DSR_BYTES(dsr_au_count) + CBR_BYTES(cbr_au_count);
 	bytes += sizeof(struct gru_thread_state);
-	gts = kzalloc(bytes, GFP_KERNEL);
+	gts = kmalloc(bytes, GFP_KERNEL);
 	if (!gts)
 		return NULL;
 
 	STAT(gts_alloc);
+	memset(gts, 0, sizeof(struct gru_thread_state)); /* zero out header */
 	atomic_set(&gts->ts_refcnt, 1);
 	mutex_init(&gts->ts_ctxlock);
-	gts->ts_cbr_au_count = vdata->vd_cbr_au_count;
-	gts->ts_dsr_au_count = vdata->vd_dsr_au_count;
-	gts->ts_user_options = vdata->vd_user_options;
+	gts->ts_cbr_au_count = cbr_au_count;
+	gts->ts_dsr_au_count = dsr_au_count;
+	gts->ts_user_options = options;
 	gts->ts_tsid = tsid;
-	gts->ts_user_options = vdata->vd_user_options;
 	gts->ts_ctxnum = NULLCTX;
-	gts->ts_mm = current->mm;
-	gts->ts_vma = vma;
 	gts->ts_tlb_int_select = -1;
-	gts->ts_gms = gru_register_mmu_notifier();
+	gts->ts_cch_req_slice = -1;
 	gts->ts_sizeavail = GRU_SIZEAVAIL(PAGE_SHIFT);
-	if (!gts->ts_gms)
-		goto err;
+	if (vma) {
+		gts->ts_mm = current->mm;
+		gts->ts_vma = vma;
+		gts->ts_gms = gru_register_mmu_notifier();
+		if (!gts->ts_gms)
+			goto err;
+	}
 
-	gru_dbg(grudev, "alloc vdata %p, new gts %p\n", vdata, gts);
+	gru_dbg(grudev, "alloc gts %p\n", gts);
 	return gts;
 
 err:
@@ -381,7 +392,8 @@ struct gru_thread_state *gru_alloc_thread_state(struct vm_area_struct *vma,
 	struct gru_vma_data *vdata = vma->vm_private_data;
 	struct gru_thread_state *gts, *ngts;
 
-	gts = gru_alloc_gts(vma, vdata, tsid);
+	gts = gru_alloc_gts(vma, vdata->vd_cbr_au_count, vdata->vd_dsr_au_count,
+			    vdata->vd_user_options, tsid);
 	if (!gts)
 		return NULL;
 
@@ -458,7 +470,8 @@ static void gru_prefetch_context(void *gseg, void *cb, void *cbe,
 }
 
 static void gru_load_context_data(void *save, void *grubase, int ctxnum,
-				  unsigned long cbrmap, unsigned long dsrmap)
+				  unsigned long cbrmap, unsigned long dsrmap,
+				  int data_valid)
 {
 	void *gseg, *cb, *cbe;
 	unsigned long length;
@@ -471,12 +484,22 @@ static void gru_load_context_data(void *save, void *grubase, int ctxnum,
 	gru_prefetch_context(gseg, cb, cbe, cbrmap, length);
 
 	for_each_cbr_in_allocation_map(i, &cbrmap, scr) {
-		save += gru_copy_handle(cb, save);
-		save += gru_copy_handle(cbe + i * GRU_HANDLE_STRIDE, save);
+		if (data_valid) {
+			save += gru_copy_handle(cb, save);
+			save += gru_copy_handle(cbe + i * GRU_HANDLE_STRIDE,
+						save);
+		} else {
+			memset(cb, 0, GRU_CACHE_LINE_BYTES);
+			memset(cbe + i * GRU_HANDLE_STRIDE, 0,
+						GRU_CACHE_LINE_BYTES);
+		}
 		cb += GRU_HANDLE_STRIDE;
 	}
 
-	memcpy(gseg + GRU_DS_BASE, save, length);
+	if (data_valid)
+		memcpy(gseg + GRU_DS_BASE, save, length);
+	else
+		memset(gseg + GRU_DS_BASE, 0, length);
 }
 
 static void gru_unload_context_data(void *save, void *grubase, int ctxnum,
@@ -506,7 +529,8 @@ void gru_unload_context(struct gru_thread_state *gts, int savestate)
 	struct gru_context_configuration_handle *cch;
 	int ctxnum = gts->ts_ctxnum;
 
-	zap_vma_ptes(gts->ts_vma, UGRUADDR(gts), GRU_GSEG_PAGESIZE);
+	if (!is_kernel_context(gts))
+		zap_vma_ptes(gts->ts_vma, UGRUADDR(gts), GRU_GSEG_PAGESIZE);
 	cch = get_cch(gru->gs_gru_base_vaddr, ctxnum);
 
 	gru_dbg(grudev, "gts %p\n", gts);
@@ -514,11 +538,14 @@ void gru_unload_context(struct gru_thread_state *gts, int savestate)
 	if (cch_interrupt_sync(cch))
 		BUG();
 
-	gru_unload_mm_tracker(gru, gts);
-	if (savestate)
+	if (!is_kernel_context(gts))
+		gru_unload_mm_tracker(gru, gts);
+	if (savestate) {
 		gru_unload_context_data(gts->ts_gdata, gru->gs_gru_base_vaddr,
 					ctxnum, gts->ts_cbr_map,
 					gts->ts_dsr_map);
+		gts->ts_data_valid = 1;
+	}
 
 	if (cch_deallocate(cch))
 		BUG();
@@ -526,24 +553,22 @@ void gru_unload_context(struct gru_thread_state *gts, int savestate)
 	unlock_cch_handle(cch);
 
 	gru_free_gru_context(gts);
-	STAT(unload_context);
 }
 
 /*
  * Load a GRU context by copying it from the thread data structure in memory
  * to the GRU.
  */
-static void gru_load_context(struct gru_thread_state *gts)
+void gru_load_context(struct gru_thread_state *gts)
 {
 	struct gru_state *gru = gts->ts_gru;
 	struct gru_context_configuration_handle *cch;
-	int err, asid, ctxnum = gts->ts_ctxnum;
+	int i, err, asid, ctxnum = gts->ts_ctxnum;
 
 	gru_dbg(grudev, "gts %p\n", gts);
 	cch = get_cch(gru->gs_gru_base_vaddr, ctxnum);
 
 	lock_cch_handle(cch);
-	asid = gru_load_mm_tracker(gru, gts);
 	cch->tfm_fault_bit_enable =
 	    (gts->ts_user_options == GRU_OPT_MISS_FMM_POLL
 	     || gts->ts_user_options == GRU_OPT_MISS_FMM_INTR);
@@ -552,9 +577,32 @@ static void gru_load_context(struct gru_thread_state *gts)
 		gts->ts_tlb_int_select = gru_cpu_fault_map_id();
 		cch->tlb_int_select = gts->ts_tlb_int_select;
 	}
+	if (gts->ts_cch_req_slice >= 0) {
+		cch->req_slice_set_enable = 1;
+		cch->req_slice = gts->ts_cch_req_slice;
+	} else {
+		cch->req_slice_set_enable =0;
+	}
 	cch->tfm_done_bit_enable = 0;
-	err = cch_allocate(cch, asid, gts->ts_sizeavail, gts->ts_cbr_map,
-				gts->ts_dsr_map);
+	cch->dsr_allocation_map = gts->ts_dsr_map;
+	cch->cbr_allocation_map = gts->ts_cbr_map;
+
+	if (is_kernel_context(gts)) {
+		cch->unmap_enable = 1;
+		cch->tfm_done_bit_enable = 1;
+		cch->cb_int_enable = 1;
+	} else {
+		cch->unmap_enable = 0;
+		cch->tfm_done_bit_enable = 0;
+		cch->cb_int_enable = 0;
+		asid = gru_load_mm_tracker(gru, gts);
+		for (i = 0; i < 8; i++) {
+			cch->asid[i] = asid + i;
+			cch->sizeavail[i] = gts->ts_sizeavail;
+		}
+	}
+
+	err = cch_allocate(cch);
 	if (err) {
 		gru_dbg(grudev,
 			"err %d: cch %p, gts %p, cbr 0x%lx, dsr 0x%lx\n",
@@ -563,13 +611,11 @@ static void gru_load_context(struct gru_thread_state *gts)
 	}
 
 	gru_load_context_data(gts->ts_gdata, gru->gs_gru_base_vaddr, ctxnum,
-			      gts->ts_cbr_map, gts->ts_dsr_map);
+			gts->ts_cbr_map, gts->ts_dsr_map, gts->ts_data_valid);
 
 	if (cch_start(cch))
 		BUG();
 	unlock_cch_handle(cch);
-
-	STAT(load_context);
 }
 
 /*
@@ -599,6 +645,9 @@ int gru_update_cch(struct gru_thread_state *gts, int force_unload)
 				cch->sizeavail[i] = gts->ts_sizeavail;
 			gts->ts_tlb_int_select = gru_cpu_fault_map_id();
 			cch->tlb_int_select = gru_cpu_fault_map_id();
+			cch->tfm_fault_bit_enable =
+			  (gts->ts_user_options == GRU_OPT_MISS_FMM_POLL
+			    || gts->ts_user_options == GRU_OPT_MISS_FMM_INTR);
 		} else {
 			for (i = 0; i < 8; i++)
 				cch->asid[i] = 0;
@@ -642,7 +691,28 @@ static int gru_retarget_intr(struct gru_thread_state *gts)
 #define next_gru(b, g)	(((g) < &(b)->bs_grus[GRU_CHIPLETS_PER_BLADE - 1]) ?  \
 				 ((g)+1) : &(b)->bs_grus[0])
 
-static void gru_steal_context(struct gru_thread_state *gts)
+static int is_gts_stealable(struct gru_thread_state *gts,
+		struct gru_blade_state *bs)
+{
+	if (is_kernel_context(gts))
+		return down_write_trylock(&bs->bs_kgts_sema);
+	else
+		return mutex_trylock(&gts->ts_ctxlock);
+}
+
+static void gts_stolen(struct gru_thread_state *gts,
+		struct gru_blade_state *bs)
+{
+	if (is_kernel_context(gts)) {
+		up_write(&bs->bs_kgts_sema);
+		STAT(steal_kernel_context);
+	} else {
+		mutex_unlock(&gts->ts_ctxlock);
+		STAT(steal_user_context);
+	}
+}
+
+void gru_steal_context(struct gru_thread_state *gts, int blade_id)
 {
 	struct gru_blade_state *blade;
 	struct gru_state *gru, *gru0;
@@ -652,8 +722,7 @@ static void gru_steal_context(struct gru_thread_state *gts)
 	cbr = gts->ts_cbr_au_count;
 	dsr = gts->ts_dsr_au_count;
 
-	preempt_disable();
-	blade = gru_base[uv_numa_blade_id()];
+	blade = gru_base[blade_id];
 	spin_lock(&blade->bs_lock);
 
 	ctxnum = next_ctxnum(blade->bs_lru_ctxnum);
@@ -676,7 +745,7 @@ static void gru_steal_context(struct gru_thread_state *gts)
 			 * success are high. If trylock fails, try to steal a
 			 * different GSEG.
 			 */
-			if (ngts && mutex_trylock(&ngts->ts_ctxlock))
+			if (ngts && is_gts_stealable(ngts, blade))
 				break;
 			ngts = NULL;
 			flag = 1;
@@ -690,13 +759,12 @@ static void gru_steal_context(struct gru_thread_state *gts)
 	blade->bs_lru_gru = gru;
 	blade->bs_lru_ctxnum = ctxnum;
 	spin_unlock(&blade->bs_lock);
-	preempt_enable();
 
 	if (ngts) {
-		STAT(steal_context);
+		gts->ustats.context_stolen++;
 		ngts->ts_steal_jiffies = jiffies;
-		gru_unload_context(ngts, 1);
-		mutex_unlock(&ngts->ts_ctxlock);
+		gru_unload_context(ngts, is_kernel_context(ngts) ? 0 : 1);
+		gts_stolen(ngts, blade);
 	} else {
 		STAT(steal_context_failed);
 	}
@@ -710,17 +778,17 @@ static void gru_steal_context(struct gru_thread_state *gts)
 /*
  * Scan the GRUs on the local blade & assign a GRU context.
  */
-static struct gru_state *gru_assign_gru_context(struct gru_thread_state *gts)
+struct gru_state *gru_assign_gru_context(struct gru_thread_state *gts,
+						int blade)
 {
 	struct gru_state *gru, *grux;
 	int i, max_active_contexts;
 
-	preempt_disable();
 
 again:
 	gru = NULL;
 	max_active_contexts = GRU_NUM_CCH;
-	for_each_gru_on_blade(grux, uv_numa_blade_id(), i) {
+	for_each_gru_on_blade(grux, blade, i) {
 		if (check_gru_resources(grux, gts->ts_cbr_au_count,
 					gts->ts_dsr_au_count,
 					max_active_contexts)) {
@@ -760,7 +828,6 @@ again:
 		STAT(assign_context_failed);
 	}
 
-	preempt_enable();
 	return gru;
 }
 
@@ -775,6 +842,7 @@ int gru_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 {
 	struct gru_thread_state *gts;
 	unsigned long paddr, vaddr;
+	int blade_id;
 
 	vaddr = (unsigned long)vmf->virtual_address;
 	gru_dbg(grudev, "vma %p, vaddr 0x%lx (0x%lx)\n",
@@ -789,8 +857,10 @@ int gru_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 again:
 	mutex_lock(&gts->ts_ctxlock);
 	preempt_disable();
+	blade_id = uv_numa_blade_id();
+
 	if (gts->ts_gru) {
-		if (gts->ts_gru->gs_blade_id != uv_numa_blade_id()) {
+		if (gts->ts_gru->gs_blade_id != blade_id) {
 			STAT(migrated_nopfn_unload);
 			gru_unload_context(gts, 1);
 		} else {
@@ -800,12 +870,15 @@ again:
 	}
 
 	if (!gts->ts_gru) {
-		if (!gru_assign_gru_context(gts)) {
-			mutex_unlock(&gts->ts_ctxlock);
+		STAT(load_user_context);
+		if (!gru_assign_gru_context(gts, blade_id)) {
 			preempt_enable();
+			mutex_unlock(&gts->ts_ctxlock);
+			set_current_state(TASK_INTERRUPTIBLE);
 			schedule_timeout(GRU_ASSIGN_DELAY);  /* true hack ZZZ */
+			blade_id = uv_numa_blade_id();
 			if (gts->ts_steal_jiffies + GRU_STEAL_DELAY < jiffies)
-				gru_steal_context(gts);
+				gru_steal_context(gts, blade_id);
 			goto again;
 		}
 		gru_load_context(gts);
@@ -815,8 +888,8 @@ again:
 				vma->vm_page_prot);
 	}
 
-	mutex_unlock(&gts->ts_ctxlock);
 	preempt_enable();
+	mutex_unlock(&gts->ts_ctxlock);
 
 	return VM_FAULT_NOPAGE;
 }
diff --git a/drivers/misc/sgi-gru/gruprocfs.c b/drivers/misc/sgi-gru/gruprocfs.c
index ee74821b171..9cbf95bedce 100644
--- a/drivers/misc/sgi-gru/gruprocfs.c
+++ b/drivers/misc/sgi-gru/gruprocfs.c
@@ -51,9 +51,12 @@ static int statistics_show(struct seq_file *s, void *p)
 	printstat(s, assign_context);
 	printstat(s, assign_context_failed);
 	printstat(s, free_context);
-	printstat(s, load_context);
-	printstat(s, unload_context);
-	printstat(s, steal_context);
+	printstat(s, load_user_context);
+	printstat(s, load_kernel_context);
+	printstat(s, lock_kernel_context);
+	printstat(s, unlock_kernel_context);
+	printstat(s, steal_user_context);
+	printstat(s, steal_kernel_context);
 	printstat(s, steal_context_failed);
 	printstat(s, nopfn);
 	printstat(s, break_cow);
@@ -70,7 +73,7 @@ static int statistics_show(struct seq_file *s, void *p)
 	printstat(s, user_flush_tlb);
 	printstat(s, user_unload_context);
 	printstat(s, user_exception);
-	printstat(s, set_task_slice);
+	printstat(s, set_context_option);
 	printstat(s, migrate_check);
 	printstat(s, migrated_retarget);
 	printstat(s, migrated_unload);
@@ -84,6 +87,9 @@ static int statistics_show(struct seq_file *s, void *p)
 	printstat(s, tlb_dropin_fail_range_active);
 	printstat(s, tlb_dropin_fail_idle);
 	printstat(s, tlb_dropin_fail_fmm);
+	printstat(s, tlb_dropin_fail_no_exception);
+	printstat(s, tlb_dropin_fail_no_exception_war);
+	printstat(s, tfh_stale_on_fault);
 	printstat(s, mmu_invalidate_range);
 	printstat(s, mmu_invalidate_page);
 	printstat(s, mmu_clear_flush_young);
@@ -158,8 +164,7 @@ static ssize_t options_write(struct file *file, const char __user *userbuf,
 	unsigned long val;
 	char buf[80];
 
-	if (copy_from_user
-	    (buf, userbuf, count < sizeof(buf) ? count : sizeof(buf)))
+	if (strncpy_from_user(buf, userbuf, sizeof(buf) - 1) < 0)
 		return -EFAULT;
 	buf[count - 1] = '\0';
 	if (!strict_strtoul(buf, 10, &val))
diff --git a/drivers/misc/sgi-gru/grutables.h b/drivers/misc/sgi-gru/grutables.h
index bf1eeb7553e..34ab3d45391 100644
--- a/drivers/misc/sgi-gru/grutables.h
+++ b/drivers/misc/sgi-gru/grutables.h
@@ -148,11 +148,13 @@
 #include <linux/wait.h>
 #include <linux/mmu_notifier.h>
 #include "gru.h"
+#include "grulib.h"
 #include "gruhandles.h"
 
 extern struct gru_stats_s gru_stats;
 extern struct gru_blade_state *gru_base[];
 extern unsigned long gru_start_paddr, gru_end_paddr;
+extern void *gru_start_vaddr;
 extern unsigned int gru_max_gids;
 
 #define GRU_MAX_BLADES		MAX_NUMNODES
@@ -174,9 +176,12 @@ struct gru_stats_s {
 	atomic_long_t assign_context;
 	atomic_long_t assign_context_failed;
 	atomic_long_t free_context;
-	atomic_long_t load_context;
-	atomic_long_t unload_context;
-	atomic_long_t steal_context;
+	atomic_long_t load_user_context;
+	atomic_long_t load_kernel_context;
+	atomic_long_t lock_kernel_context;
+	atomic_long_t unlock_kernel_context;
+	atomic_long_t steal_user_context;
+	atomic_long_t steal_kernel_context;
 	atomic_long_t steal_context_failed;
 	atomic_long_t nopfn;
 	atomic_long_t break_cow;
@@ -193,7 +198,7 @@ struct gru_stats_s {
 	atomic_long_t user_flush_tlb;
 	atomic_long_t user_unload_context;
 	atomic_long_t user_exception;
-	atomic_long_t set_task_slice;
+	atomic_long_t set_context_option;
 	atomic_long_t migrate_check;
 	atomic_long_t migrated_retarget;
 	atomic_long_t migrated_unload;
@@ -207,6 +212,9 @@ struct gru_stats_s {
 	atomic_long_t tlb_dropin_fail_range_active;
 	atomic_long_t tlb_dropin_fail_idle;
 	atomic_long_t tlb_dropin_fail_fmm;
+	atomic_long_t tlb_dropin_fail_no_exception;
+	atomic_long_t tlb_dropin_fail_no_exception_war;
+	atomic_long_t tfh_stale_on_fault;
 	atomic_long_t mmu_invalidate_range;
 	atomic_long_t mmu_invalidate_page;
 	atomic_long_t mmu_clear_flush_young;
@@ -253,7 +261,6 @@ extern struct mcs_op_statistic mcs_op_statistics[mcsop_last];
 
 #define OPT_DPRINT	1
 #define OPT_STATS	2
-#define GRU_QUICKLOOK	4
 
 
 #define IRQ_GRU			110	/* Starting IRQ number for interrupts */
@@ -373,6 +380,7 @@ struct gru_thread_state {
 						   required for contest */
 	unsigned char		ts_cbr_au_count;/* Number of CBR resources
 						   required for contest */
+	char			ts_cch_req_slice;/* CCH packet slice */
 	char			ts_blade;	/* If >= 0, migrate context if
 						   ref from diferent blade */
 	char			ts_force_cch_reload;
@@ -380,6 +388,9 @@ struct gru_thread_state {
 						   after migration */
 	char			ts_cbr_idx[GRU_CBR_AU];/* CBR numbers of each
 							  allocated CB */
+	int			ts_data_valid;	/* Indicates if ts_gdata has
+						   valid data */
+	struct gts_statistics	ustats;		/* User statistics */
 	unsigned long		ts_gdata[0];	/* save area for GRU data (CB,
 						   DS, CBE) */
 };
@@ -452,6 +463,14 @@ struct gru_blade_state {
 							   reserved cb */
 	void			*kernel_dsr;		/* First kernel
 							   reserved DSR */
+	struct rw_semaphore	bs_kgts_sema;		/* lock for kgts */
+	struct gru_thread_state *bs_kgts;		/* GTS for kernel use */
+
+	/* ---- the following are used for managing kernel async GRU CBRs --- */
+	int			bs_async_dsr_bytes;	/* DSRs for async */
+	int			bs_async_cbrs;		/* CBRs AU for async */
+	struct completion	*bs_async_wq;
+
 	/* ---- the following are protected by the bs_lock spinlock ---- */
 	spinlock_t		bs_lock;		/* lock used for
 							   stealing contexts */
@@ -552,6 +571,12 @@ struct gru_blade_state {
 
 /* Lock hierarchy checking enabled only in emulator */
 
+/* 0 = lock failed, 1 = locked */
+static inline int __trylock_handle(void *h)
+{
+	return !test_and_set_bit(1, h);
+}
+
 static inline void __lock_handle(void *h)
 {
 	while (test_and_set_bit(1, h))
@@ -563,6 +588,11 @@ static inline void __unlock_handle(void *h)
 	clear_bit(1, h);
 }
 
+static inline int trylock_cch_handle(struct gru_context_configuration_handle *cch)
+{
+	return __trylock_handle(cch);
+}
+
 static inline void lock_cch_handle(struct gru_context_configuration_handle *cch)
 {
 	__lock_handle(cch);
@@ -584,6 +614,11 @@ static inline void unlock_tgh_handle(struct gru_tlb_global_handle *tgh)
 	__unlock_handle(tgh);
 }
 
+static inline int is_kernel_context(struct gru_thread_state *gts)
+{
+	return !gts->ts_mm;
+}
+
 /*-----------------------------------------------------------------------------
  * Function prototypes & externs
  */
@@ -598,24 +633,32 @@ extern struct gru_thread_state *gru_find_thread_state(struct vm_area_struct
 				*vma, int tsid);
 extern struct gru_thread_state *gru_alloc_thread_state(struct vm_area_struct
 				*vma, int tsid);
+extern struct gru_state *gru_assign_gru_context(struct gru_thread_state *gts,
+		int blade);
+extern void gru_load_context(struct gru_thread_state *gts);
+extern void gru_steal_context(struct gru_thread_state *gts, int blade_id);
 extern void gru_unload_context(struct gru_thread_state *gts, int savestate);
 extern int gru_update_cch(struct gru_thread_state *gts, int force_unload);
 extern void gts_drop(struct gru_thread_state *gts);
 extern void gru_tgh_flush_init(struct gru_state *gru);
-extern int gru_kservices_init(struct gru_state *gru);
-extern void gru_kservices_exit(struct gru_state *gru);
+extern int gru_kservices_init(void);
+extern void gru_kservices_exit(void);
+extern int gru_dump_chiplet_request(unsigned long arg);
+extern long gru_get_gseg_statistics(unsigned long arg);
 extern irqreturn_t gru_intr(int irq, void *dev_id);
 extern int gru_handle_user_call_os(unsigned long address);
 extern int gru_user_flush_tlb(unsigned long arg);
 extern int gru_user_unload_context(unsigned long arg);
 extern int gru_get_exception_detail(unsigned long arg);
-extern int gru_set_task_slice(long address);
+extern int gru_set_context_option(unsigned long address);
 extern int gru_cpu_fault_map_id(void);
 extern struct vm_area_struct *gru_find_vma(unsigned long vaddr);
 extern void gru_flush_all_tlb(struct gru_state *gru);
 extern int gru_proc_init(void);
 extern void gru_proc_exit(void);
 
+extern struct gru_thread_state *gru_alloc_gts(struct vm_area_struct *vma,
+		int cbr_au_count, int dsr_au_count, int options, int tsid);
 extern unsigned long gru_reserve_cb_resources(struct gru_state *gru,
 		int cbr_au_count, char *cbmap);
 extern unsigned long gru_reserve_ds_resources(struct gru_state *gru,
@@ -624,6 +667,7 @@ extern int gru_fault(struct vm_area_struct *, struct vm_fault *vmf);
 extern struct gru_mm_struct *gru_register_mmu_notifier(void);
 extern void gru_drop_mmu_notifier(struct gru_mm_struct *gms);
 
+extern int gru_ktest(unsigned long arg);
 extern void gru_flush_tlb_range(struct gru_mm_struct *gms, unsigned long start,
 					unsigned long len);
 
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 40111a6d8d5..891ef18bd77 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -94,6 +94,31 @@ config MMC_SDHCI_PLTFM
 
 	  If unsure, say N.
 
+config MMC_SDHCI_S3C
+	tristate "SDHCI support on Samsung S3C SoC"
+	depends on MMC_SDHCI && (PLAT_S3C24XX || PLAT_S3C64XX)
+	help
+	  This selects the Secure Digital Host Controller Interface (SDHCI)
+	  often referrered to as the HSMMC block in some of the Samsung S3C
+	  range of SoC.
+
+	  Note, due to the problems with DMA, the DMA support is only
+	  available with CONFIG_EXPERIMENTAL is selected.
+
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_SDHCI_S3C_DMA
+	bool "DMA support on S3C SDHCI"
+	depends on MMC_SDHCI_S3C && EXPERIMENTAL
+	help
+	  Enable DMA support on the Samsung S3C SDHCI glue. The DMA
+	  has proved to be problematic if the controller encounters
+	  certain errors, and thus should be treated with care.
+
+	  YMMV.
+
 config MMC_OMAP
 	tristate "TI OMAP Multimedia Card Interface support"
 	depends on ARCH_OMAP
@@ -265,3 +290,14 @@ config MMC_CB710
 	  This driver can also be built as a module. If so, the module
 	  will be called cb710-mmc.
 
+config MMC_VIA_SDMMC
+	tristate "VIA SD/MMC Card Reader Driver"
+	depends on PCI
+	help
+	  This selects the VIA SD/MMC Card Reader driver, say Y or M here.
+	  VIA provides one multi-functional card reader which integrated into
+	  some motherboards manufactured by VIA. This card reader supports
+	  SD/MMC/SDHC.
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 79da397c5fe..cf153f62845 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_MMC_SDHCI_PCI)	+= sdhci-pci.o
 obj-$(CONFIG_MMC_RICOH_MMC)	+= ricoh_mmc.o
 obj-$(CONFIG_MMC_SDHCI_OF)	+= sdhci-of.o
 obj-$(CONFIG_MMC_SDHCI_PLTFM)	+= sdhci-pltfm.o
+obj-$(CONFIG_MMC_SDHCI_S3C)	+= sdhci-s3c.o
 obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
 obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
 obj-$(CONFIG_MMC_OMAP)		+= omap.o
@@ -31,6 +32,7 @@ obj-$(CONFIG_MMC_S3C)   	+= s3cmci.o
 obj-$(CONFIG_MMC_SDRICOH_CS)	+= sdricoh_cs.o
 obj-$(CONFIG_MMC_TMIO)		+= tmio_mmc.o
 obj-$(CONFIG_MMC_CB710)	+= cb710-mmc.o
+obj-$(CONFIG_MMC_VIA_SDMMC)	+= via-sdmmc.o
 
 ifeq ($(CONFIG_CB710_DEBUG),y)
 	CFLAGS-cb710-mmc	+= -DDEBUG
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 4eb4f37544a..8c08cd7efa7 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -794,7 +794,7 @@ static void s3cmci_dma_setup(struct s3cmci_host *host,
 			      host->mem->start + host->sdidata);
 
 	if (!setup_ok) {
-		s3c2410_dma_config(host->dma, 4, 0);
+		s3c2410_dma_config(host->dma, 4);
 		s3c2410_dma_set_buffdone_fn(host->dma,
 					    s3cmci_dma_done_callback);
 		s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART);
diff --git a/drivers/mmc/host/sdhci-of.c b/drivers/mmc/host/sdhci-of.c
index 128c614d11a..d79fa55c3b8 100644
--- a/drivers/mmc/host/sdhci-of.c
+++ b/drivers/mmc/host/sdhci-of.c
@@ -250,6 +250,9 @@ static int __devinit sdhci_of_probe(struct of_device *ofdev,
 		host->ops = &sdhci_of_data->ops;
 	}
 
+	if (of_get_property(np, "sdhci,1-bit-only", NULL))
+		host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA;
+
 	clk = of_get_property(np, "clock-frequency", &size);
 	if (clk && size == sizeof(*clk) && *clk)
 		of_host->clock = *clk;
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 65be27995d5..2f15cc17d88 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -284,6 +284,18 @@ static const struct sdhci_pci_fixes sdhci_jmicron = {
 	.resume		= jmicron_resume,
 };
 
+static int via_probe(struct sdhci_pci_chip *chip)
+{
+	if (chip->pdev->revision == 0x10)
+		chip->quirks |= SDHCI_QUIRK_DELAY_AFTER_POWER;
+
+	return 0;
+}
+
+static const struct sdhci_pci_fixes sdhci_via = {
+	.probe		= via_probe,
+};
+
 static const struct pci_device_id pci_ids[] __devinitdata = {
 	{
 		.vendor		= PCI_VENDOR_ID_RICOH,
@@ -349,6 +361,14 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
 		.driver_data	= (kernel_ulong_t)&sdhci_jmicron,
 	},
 
+	{
+		.vendor		= PCI_VENDOR_ID_VIA,
+		.device		= 0x95d0,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_via,
+	},
+
 	{	/* Generic SD host controller */
 		PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)
 	},
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
new file mode 100644
index 00000000000..50997d2a63e
--- /dev/null
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -0,0 +1,428 @@
+/* linux/drivers/mmc/host/sdhci-s3c.c
+ *
+ * Copyright 2008 Openmoko Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * SDHCI (HSMMC) support for Samsung SoC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <linux/mmc/host.h>
+
+#include <plat/sdhci.h>
+#include <plat/regs-sdhci.h>
+
+#include "sdhci.h"
+
+#define MAX_BUS_CLK	(4)
+
+/**
+ * struct sdhci_s3c - S3C SDHCI instance
+ * @host: The SDHCI host created
+ * @pdev: The platform device we where created from.
+ * @ioarea: The resource created when we claimed the IO area.
+ * @pdata: The platform data for this controller.
+ * @cur_clk: The index of the current bus clock.
+ * @clk_io: The clock for the internal bus interface.
+ * @clk_bus: The clocks that are available for the SD/MMC bus clock.
+ */
+struct sdhci_s3c {
+	struct sdhci_host	*host;
+	struct platform_device	*pdev;
+	struct resource		*ioarea;
+	struct s3c_sdhci_platdata *pdata;
+	unsigned int		cur_clk;
+
+	struct clk		*clk_io;
+	struct clk		*clk_bus[MAX_BUS_CLK];
+};
+
+static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host)
+{
+	return sdhci_priv(host);
+}
+
+/**
+ * get_curclk - convert ctrl2 register to clock source number
+ * @ctrl2: Control2 register value.
+ */
+static u32 get_curclk(u32 ctrl2)
+{
+	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+	ctrl2 >>= S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
+
+	return ctrl2;
+}
+
+static void sdhci_s3c_check_sclk(struct sdhci_host *host)
+{
+	struct sdhci_s3c *ourhost = to_s3c(host);
+	u32 tmp = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
+
+	if (get_curclk(tmp) != ourhost->cur_clk) {
+		dev_dbg(&ourhost->pdev->dev, "restored ctrl2 clock setting\n");
+
+		tmp &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+		tmp |= ourhost->cur_clk << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
+		writel(tmp, host->ioaddr + 0x80);
+	}
+}
+
+/**
+ * sdhci_s3c_get_max_clk - callback to get maximum clock frequency.
+ * @host: The SDHCI host instance.
+ *
+ * Callback to return the maximum clock rate acheivable by the controller.
+*/
+static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host)
+{
+	struct sdhci_s3c *ourhost = to_s3c(host);
+	struct clk *busclk;
+	unsigned int rate, max;
+	int clk;
+
+	/* note, a reset will reset the clock source */
+
+	sdhci_s3c_check_sclk(host);
+
+	for (max = 0, clk = 0; clk < MAX_BUS_CLK; clk++) {
+		busclk = ourhost->clk_bus[clk];
+		if (!busclk)
+			continue;
+
+		rate = clk_get_rate(busclk);
+		if (rate > max)
+			max = rate;
+	}
+
+	return max;
+}
+
+static unsigned int sdhci_s3c_get_timeout_clk(struct sdhci_host *host)
+{
+	return sdhci_s3c_get_max_clk(host) / 1000000;
+}
+
+/**
+ * sdhci_s3c_consider_clock - consider one the bus clocks for current setting
+ * @ourhost: Our SDHCI instance.
+ * @src: The source clock index.
+ * @wanted: The clock frequency wanted.
+ */
+static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost,
+					     unsigned int src,
+					     unsigned int wanted)
+{
+	unsigned long rate;
+	struct clk *clksrc = ourhost->clk_bus[src];
+	int div;
+
+	if (!clksrc)
+		return UINT_MAX;
+
+	rate = clk_get_rate(clksrc);
+
+	for (div = 1; div < 256; div *= 2) {
+		if ((rate / div) <= wanted)
+			break;
+	}
+
+	dev_dbg(&ourhost->pdev->dev, "clk %d: rate %ld, want %d, got %ld\n",
+		src, rate, wanted, rate / div);
+
+	return (wanted - (rate / div));
+}
+
+/**
+ * sdhci_s3c_set_clock - callback on clock change
+ * @host: The SDHCI host being changed
+ * @clock: The clock rate being requested.
+ *
+ * When the card's clock is going to be changed, look at the new frequency
+ * and find the best clock source to go with it.
+*/
+static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+	struct sdhci_s3c *ourhost = to_s3c(host);
+	unsigned int best = UINT_MAX;
+	unsigned int delta;
+	int best_src = 0;
+	int src;
+	u32 ctrl;
+
+	/* don't bother if the clock is going off. */
+	if (clock == 0)
+		return;
+
+	for (src = 0; src < MAX_BUS_CLK; src++) {
+		delta = sdhci_s3c_consider_clock(ourhost, src, clock);
+		if (delta < best) {
+			best = delta;
+			best_src = src;
+		}
+	}
+
+	dev_dbg(&ourhost->pdev->dev,
+		"selected source %d, clock %d, delta %d\n",
+		 best_src, clock, best);
+
+	/* select the new clock source */
+
+	if (ourhost->cur_clk != best_src) {
+		struct clk *clk = ourhost->clk_bus[best_src];
+
+		/* turn clock off to card before changing clock source */
+		writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
+
+		ourhost->cur_clk = best_src;
+		host->max_clk = clk_get_rate(clk);
+		host->timeout_clk = sdhci_s3c_get_timeout_clk(host);
+
+		ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
+		ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+		ctrl |= best_src << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
+		writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
+	}
+
+	/* reconfigure the hardware for new clock rate */
+
+	{
+		struct mmc_ios ios;
+
+		ios.clock = clock;
+
+		if (ourhost->pdata->cfg_card)
+			(ourhost->pdata->cfg_card)(ourhost->pdev, host->ioaddr,
+						   &ios, NULL);
+	}
+}
+
+static struct sdhci_ops sdhci_s3c_ops = {
+	.get_max_clock		= sdhci_s3c_get_max_clk,
+	.get_timeout_clock	= sdhci_s3c_get_timeout_clk,
+	.set_clock		= sdhci_s3c_set_clock,
+};
+
+static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
+{
+	struct s3c_sdhci_platdata *pdata = pdev->dev.platform_data;
+	struct device *dev = &pdev->dev;
+	struct sdhci_host *host;
+	struct sdhci_s3c *sc;
+	struct resource *res;
+	int ret, irq, ptr, clks;
+
+	if (!pdata) {
+		dev_err(dev, "no device data specified\n");
+		return -ENOENT;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "no irq specified\n");
+		return irq;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "no memory specified\n");
+		return -ENOENT;
+	}
+
+	host = sdhci_alloc_host(dev, sizeof(struct sdhci_s3c));
+	if (IS_ERR(host)) {
+		dev_err(dev, "sdhci_alloc_host() failed\n");
+		return PTR_ERR(host);
+	}
+
+	sc = sdhci_priv(host);
+
+	sc->host = host;
+	sc->pdev = pdev;
+	sc->pdata = pdata;
+
+	platform_set_drvdata(pdev, host);
+
+	sc->clk_io = clk_get(dev, "hsmmc");
+	if (IS_ERR(sc->clk_io)) {
+		dev_err(dev, "failed to get io clock\n");
+		ret = PTR_ERR(sc->clk_io);
+		goto err_io_clk;
+	}
+
+	/* enable the local io clock and keep it running for the moment. */
+	clk_enable(sc->clk_io);
+
+	for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
+		struct clk *clk;
+		char *name = pdata->clocks[ptr];
+
+		if (name == NULL)
+			continue;
+
+		clk = clk_get(dev, name);
+		if (IS_ERR(clk)) {
+			dev_err(dev, "failed to get clock %s\n", name);
+			continue;
+		}
+
+		clks++;
+		sc->clk_bus[ptr] = clk;
+		clk_enable(clk);
+
+		dev_info(dev, "clock source %d: %s (%ld Hz)\n",
+			 ptr, name, clk_get_rate(clk));
+	}
+
+	if (clks == 0) {
+		dev_err(dev, "failed to find any bus clocks\n");
+		ret = -ENOENT;
+		goto err_no_busclks;
+	}
+
+	sc->ioarea = request_mem_region(res->start, resource_size(res),
+					mmc_hostname(host->mmc));
+	if (!sc->ioarea) {
+		dev_err(dev, "failed to reserve register area\n");
+		ret = -ENXIO;
+		goto err_req_regs;
+	}
+
+	host->ioaddr = ioremap_nocache(res->start, resource_size(res));
+	if (!host->ioaddr) {
+		dev_err(dev, "failed to map registers\n");
+		ret = -ENXIO;
+		goto err_req_regs;
+	}
+
+	/* Ensure we have minimal gpio selected CMD/CLK/Detect */
+	if (pdata->cfg_gpio)
+		pdata->cfg_gpio(pdev, pdata->max_width);
+
+	host->hw_name = "samsung-hsmmc";
+	host->ops = &sdhci_s3c_ops;
+	host->quirks = 0;
+	host->irq = irq;
+
+	/* Setup quirks for the controller */
+
+	/* Currently with ADMA enabled we are getting some length
+	 * interrupts that are not being dealt with, do disable
+	 * ADMA until this is sorted out. */
+	host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
+	host->quirks |= SDHCI_QUIRK_32BIT_ADMA_SIZE;
+
+#ifndef CONFIG_MMC_SDHCI_S3C_DMA
+
+	/* we currently see overruns on errors, so disable the SDMA
+	 * support as well. */
+	host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
+
+	/* PIO currently has problems with multi-block IO */
+	host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK;
+
+#endif /* CONFIG_MMC_SDHCI_S3C_DMA */
+
+	/* It seems we do not get an DATA transfer complete on non-busy
+	 * transfers, not sure if this is a problem with this specific
+	 * SDHCI block, or a missing configuration that needs to be set. */
+	host->quirks |= SDHCI_QUIRK_NO_BUSY_IRQ;
+
+	host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
+			 SDHCI_QUIRK_32BIT_DMA_SIZE);
+
+	ret = sdhci_add_host(host);
+	if (ret) {
+		dev_err(dev, "sdhci_add_host() failed\n");
+		goto err_add_host;
+	}
+
+	return 0;
+
+ err_add_host:
+	release_resource(sc->ioarea);
+	kfree(sc->ioarea);
+
+ err_req_regs:
+	for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
+		clk_disable(sc->clk_bus[ptr]);
+		clk_put(sc->clk_bus[ptr]);
+	}
+
+ err_no_busclks:
+	clk_disable(sc->clk_io);
+	clk_put(sc->clk_io);
+
+ err_io_clk:
+	sdhci_free_host(host);
+
+	return ret;
+}
+
+static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int sdhci_s3c_suspend(struct platform_device *dev, pm_message_t pm)
+{
+	struct sdhci_host *host = platform_get_drvdata(dev);
+
+	sdhci_suspend_host(host, pm);
+	return 0;
+}
+
+static int sdhci_s3c_resume(struct platform_device *dev)
+{
+	struct sdhci_host *host = platform_get_drvdata(dev);
+
+	sdhci_resume_host(host);
+	return 0;
+}
+
+#else
+#define sdhci_s3c_suspend NULL
+#define sdhci_s3c_resume NULL
+#endif
+
+static struct platform_driver sdhci_s3c_driver = {
+	.probe		= sdhci_s3c_probe,
+	.remove		= __devexit_p(sdhci_s3c_remove),
+	.suspend	= sdhci_s3c_suspend,
+	.resume	        = sdhci_s3c_resume,
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "s3c-sdhci",
+	},
+};
+
+static int __init sdhci_s3c_init(void)
+{
+	return platform_driver_register(&sdhci_s3c_driver);
+}
+
+static void __exit sdhci_s3c_exit(void)
+{
+	platform_driver_unregister(&sdhci_s3c_driver);
+}
+
+module_init(sdhci_s3c_init);
+module_exit(sdhci_s3c_exit);
+
+MODULE_DESCRIPTION("Samsung SDHCI (HSMMC) glue");
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:s3c-sdhci");
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 35789c6edc1..6779b4ecab1 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -584,7 +584,7 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data)
 	 * longer to time out, but that's much better than having a too-short
 	 * timeout value.
 	 */
-	if ((host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL))
+	if (host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL)
 		return 0xE;
 
 	/* timeout in us */
@@ -1051,12 +1051,19 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
 	 * At least the Marvell CaFe chip gets confused if we set the voltage
 	 * and set turn on power at the same time, so set the voltage first.
 	 */
-	if ((host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER))
+	if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)
 		sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
 
 	pwr |= SDHCI_POWER_ON;
 
 	sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+
+	/*
+	 * Some controllers need an extra 10ms delay of 10ms before they
+	 * can apply clock after applying power
+	 */
+	if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER)
+		mdelay(10);
 }
 
 /*****************************************************************************\
@@ -1382,6 +1389,35 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
 		sdhci_finish_command(host);
 }
 
+#ifdef DEBUG
+static void sdhci_show_adma_error(struct sdhci_host *host)
+{
+	const char *name = mmc_hostname(host->mmc);
+	u8 *desc = host->adma_desc;
+	__le32 *dma;
+	__le16 *len;
+	u8 attr;
+
+	sdhci_dumpregs(host);
+
+	while (true) {
+		dma = (__le32 *)(desc + 4);
+		len = (__le16 *)(desc + 2);
+		attr = *desc;
+
+		DBG("%s: %p: DMA 0x%08x, LEN 0x%04x, Attr=0x%02x\n",
+		    name, desc, le32_to_cpu(*dma), le16_to_cpu(*len), attr);
+
+		desc += 8;
+
+		if (attr & 2)
+			break;
+	}
+}
+#else
+static void sdhci_show_adma_error(struct sdhci_host *host) { }
+#endif
+
 static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
 {
 	BUG_ON(intmask == 0);
@@ -1411,8 +1447,11 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
 		host->data->error = -ETIMEDOUT;
 	else if (intmask & (SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_END_BIT))
 		host->data->error = -EILSEQ;
-	else if (intmask & SDHCI_INT_ADMA_ERROR)
+	else if (intmask & SDHCI_INT_ADMA_ERROR) {
+		printk(KERN_ERR "%s: ADMA error\n", mmc_hostname(host->mmc));
+		sdhci_show_adma_error(host);
 		host->data->error = -EIO;
+	}
 
 	if (host->data->error)
 		sdhci_finish_data(host);
@@ -1729,7 +1768,10 @@ int sdhci_add_host(struct sdhci_host *host)
 	mmc->ops = &sdhci_ops;
 	mmc->f_min = host->max_clk / 256;
 	mmc->f_max = host->max_clk;
-	mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
+	mmc->caps = MMC_CAP_SDIO_IRQ;
+
+	if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
+		mmc->caps |= MMC_CAP_4_BIT_DATA;
 
 	if (caps & SDHCI_CAN_DO_HISPD)
 		mmc->caps |= MMC_CAP_SD_HIGHSPEED;
@@ -1802,7 +1844,7 @@ int sdhci_add_host(struct sdhci_host *host)
 	/*
 	 * Maximum block count.
 	 */
-	mmc->max_blk_count = 65535;
+	mmc->max_blk_count = (host->quirks & SDHCI_QUIRK_NO_MULTIBLOCK) ? 1 : 65535;
 
 	/*
 	 * Init tasklets.
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 2de08349c3c..831ddf7dcb4 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -226,6 +226,12 @@ struct sdhci_host {
 #define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET		(1<<19)
 /* Controller has to be forced to use block size of 2048 bytes */
 #define SDHCI_QUIRK_FORCE_BLK_SZ_2048			(1<<20)
+/* Controller cannot do multi-block transfers */
+#define SDHCI_QUIRK_NO_MULTIBLOCK			(1<<21)
+/* Controller can only handle 1-bit data transfers */
+#define SDHCI_QUIRK_FORCE_1_BIT_DATA			(1<<22)
+/* Controller needs 10ms delay between applying power and clock */
+#define SDHCI_QUIRK_DELAY_AFTER_POWER			(1<<23)
 
 	int			irq;		/* Device IRQ */
 	void __iomem *		ioaddr;		/* Mapped address */
diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c
new file mode 100644
index 00000000000..632858a9437
--- /dev/null
+++ b/drivers/mmc/host/via-sdmmc.c
@@ -0,0 +1,1362 @@
+/*
+ *  drivers/mmc/host/via-sdmmc.c - VIA SD/MMC Card Reader driver
+ *  Copyright (c) 2008, VIA Technologies Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/highmem.h>
+#include <linux/delay.h>
+
+#include <linux/mmc/host.h>
+
+#define DRV_NAME	"via_sdmmc"
+
+#define PCI_DEVICE_ID_VIA_9530	0x9530
+
+#define VIA_CRDR_SDC_OFF	0x200
+#define VIA_CRDR_DDMA_OFF	0x400
+#define VIA_CRDR_PCICTRL_OFF	0x600
+
+#define VIA_CRDR_MIN_CLOCK	375000
+#define VIA_CRDR_MAX_CLOCK	48000000
+
+/*
+ * PCI registers
+ */
+
+#define VIA_CRDR_PCI_WORK_MODE	0x40
+#define VIA_CRDR_PCI_DBG_MODE	0x41
+
+/*
+ * SDC MMIO Registers
+ */
+
+#define VIA_CRDR_SDCTRL			0x0
+#define VIA_CRDR_SDCTRL_START		0x01
+#define VIA_CRDR_SDCTRL_WRITE		0x04
+#define VIA_CRDR_SDCTRL_SINGLE_WR	0x10
+#define VIA_CRDR_SDCTRL_SINGLE_RD	0x20
+#define VIA_CRDR_SDCTRL_MULTI_WR	0x30
+#define VIA_CRDR_SDCTRL_MULTI_RD	0x40
+#define VIA_CRDR_SDCTRL_STOP		0x70
+
+#define VIA_CRDR_SDCTRL_RSP_NONE	0x0
+#define VIA_CRDR_SDCTRL_RSP_R1		0x10000
+#define VIA_CRDR_SDCTRL_RSP_R2		0x20000
+#define VIA_CRDR_SDCTRL_RSP_R3		0x30000
+#define VIA_CRDR_SDCTRL_RSP_R1B		0x90000
+
+#define VIA_CRDR_SDCARG 	0x4
+
+#define VIA_CRDR_SDBUSMODE	0x8
+#define VIA_CRDR_SDMODE_4BIT	0x02
+#define VIA_CRDR_SDMODE_CLK_ON	0x40
+
+#define VIA_CRDR_SDBLKLEN	0xc
+/*
+ * Bit 0 -Bit 10 : Block length. So, the maximum block length should be 2048.
+ * Bit 11 - Bit 13 : Reserved.
+ * GPIDET : Select GPI pin to detect card, GPI means CR_CD# in top design.
+ * INTEN : Enable SD host interrupt.
+ * Bit 16 - Bit 31 : Block count. So, the maximun block count should be 65536.
+ */
+#define VIA_CRDR_SDBLKLEN_GPIDET	0x2000
+#define VIA_CRDR_SDBLKLEN_INTEN		0x8000
+#define VIA_CRDR_MAX_BLOCK_COUNT	65536
+#define VIA_CRDR_MAX_BLOCK_LENGTH	2048
+
+#define VIA_CRDR_SDRESP0	0x10
+#define VIA_CRDR_SDRESP1	0x14
+#define VIA_CRDR_SDRESP2	0x18
+#define VIA_CRDR_SDRESP3	0x1c
+
+#define VIA_CRDR_SDCURBLKCNT	0x20
+
+#define VIA_CRDR_SDINTMASK	0x24
+/*
+ * MBDIE : Multiple Blocks transfer Done Interrupt Enable
+ * BDDIE : Block Data transfer Done Interrupt Enable
+ * CIRIE : Card Insertion or Removal Interrupt Enable
+ * CRDIE : Command-Response transfer Done Interrupt Enable
+ * CRTOIE : Command-Response response TimeOut Interrupt Enable
+ * ASCRDIE : Auto Stop Command-Response transfer Done Interrupt Enable
+ * DTIE : Data access Timeout Interrupt Enable
+ * SCIE : reSponse CRC error Interrupt Enable
+ * RCIE : Read data CRC error Interrupt Enable
+ * WCIE : Write data CRC error Interrupt Enable
+ */
+#define VIA_CRDR_SDINTMASK_MBDIE	0x10
+#define VIA_CRDR_SDINTMASK_BDDIE	0x20
+#define VIA_CRDR_SDINTMASK_CIRIE	0x80
+#define VIA_CRDR_SDINTMASK_CRDIE	0x200
+#define VIA_CRDR_SDINTMASK_CRTOIE	0x400
+#define VIA_CRDR_SDINTMASK_ASCRDIE	0x800
+#define VIA_CRDR_SDINTMASK_DTIE		0x1000
+#define VIA_CRDR_SDINTMASK_SCIE		0x2000
+#define VIA_CRDR_SDINTMASK_RCIE		0x4000
+#define VIA_CRDR_SDINTMASK_WCIE		0x8000
+
+#define VIA_CRDR_SDACTIVE_INTMASK \
+	(VIA_CRDR_SDINTMASK_MBDIE | VIA_CRDR_SDINTMASK_CIRIE \
+	| VIA_CRDR_SDINTMASK_CRDIE | VIA_CRDR_SDINTMASK_CRTOIE \
+	| VIA_CRDR_SDINTMASK_DTIE | VIA_CRDR_SDINTMASK_SCIE \
+	| VIA_CRDR_SDINTMASK_RCIE | VIA_CRDR_SDINTMASK_WCIE)
+
+#define VIA_CRDR_SDSTATUS	0x28
+/*
+ * CECC : Reserved
+ * WP : SD card Write Protect status
+ * SLOTD : Reserved
+ * SLOTG : SD SLOT status(Gpi pin status)
+ * MBD : Multiple Blocks transfer Done interrupt status
+ * BDD : Block Data transfer Done interrupt status
+ * CD : Reserved
+ * CIR : Card Insertion or Removal interrupt detected on GPI pin
+ * IO : Reserved
+ * CRD : Command-Response transfer Done interrupt status
+ * CRTO : Command-Response response TimeOut interrupt status
+ * ASCRDIE : Auto Stop Command-Response transfer Done interrupt status
+ * DT : Data access Timeout interrupt status
+ * SC : reSponse CRC error interrupt status
+ * RC : Read data CRC error interrupt status
+ * WC : Write data CRC error interrupt status
+ */
+#define VIA_CRDR_SDSTS_CECC		0x01
+#define VIA_CRDR_SDSTS_WP		0x02
+#define VIA_CRDR_SDSTS_SLOTD		0x04
+#define VIA_CRDR_SDSTS_SLOTG		0x08
+#define VIA_CRDR_SDSTS_MBD		0x10
+#define VIA_CRDR_SDSTS_BDD		0x20
+#define VIA_CRDR_SDSTS_CD		0x40
+#define VIA_CRDR_SDSTS_CIR		0x80
+#define VIA_CRDR_SDSTS_IO		0x100
+#define VIA_CRDR_SDSTS_CRD		0x200
+#define VIA_CRDR_SDSTS_CRTO		0x400
+#define VIA_CRDR_SDSTS_ASCRDIE		0x800
+#define VIA_CRDR_SDSTS_DT		0x1000
+#define VIA_CRDR_SDSTS_SC		0x2000
+#define VIA_CRDR_SDSTS_RC		0x4000
+#define VIA_CRDR_SDSTS_WC		0x8000
+
+#define VIA_CRDR_SDSTS_IGN_MASK\
+	(VIA_CRDR_SDSTS_BDD | VIA_CRDR_SDSTS_ASCRDIE | VIA_CRDR_SDSTS_IO)
+#define VIA_CRDR_SDSTS_INT_MASK \
+	(VIA_CRDR_SDSTS_MBD | VIA_CRDR_SDSTS_BDD | VIA_CRDR_SDSTS_CD \
+	| VIA_CRDR_SDSTS_CIR | VIA_CRDR_SDSTS_IO | VIA_CRDR_SDSTS_CRD \
+	| VIA_CRDR_SDSTS_CRTO | VIA_CRDR_SDSTS_ASCRDIE | VIA_CRDR_SDSTS_DT \
+	| VIA_CRDR_SDSTS_SC | VIA_CRDR_SDSTS_RC | VIA_CRDR_SDSTS_WC)
+#define VIA_CRDR_SDSTS_W1C_MASK \
+	(VIA_CRDR_SDSTS_CECC | VIA_CRDR_SDSTS_MBD | VIA_CRDR_SDSTS_BDD \
+	| VIA_CRDR_SDSTS_CD | VIA_CRDR_SDSTS_CIR | VIA_CRDR_SDSTS_CRD \
+	| VIA_CRDR_SDSTS_CRTO | VIA_CRDR_SDSTS_ASCRDIE | VIA_CRDR_SDSTS_DT \
+	| VIA_CRDR_SDSTS_SC | VIA_CRDR_SDSTS_RC | VIA_CRDR_SDSTS_WC)
+#define  VIA_CRDR_SDSTS_CMD_MASK \
+	(VIA_CRDR_SDSTS_CRD | VIA_CRDR_SDSTS_CRTO | VIA_CRDR_SDSTS_SC)
+#define  VIA_CRDR_SDSTS_DATA_MASK\
+	(VIA_CRDR_SDSTS_MBD | VIA_CRDR_SDSTS_DT \
+	| VIA_CRDR_SDSTS_RC | VIA_CRDR_SDSTS_WC)
+
+#define VIA_CRDR_SDSTATUS2	0x2a
+/*
+ * CFE : Enable SD host automatic Clock FReezing
+ */
+#define VIA_CRDR_SDSTS_CFE		0x80
+
+#define VIA_CRDR_SDRSPTMO	0x2C
+
+#define VIA_CRDR_SDCLKSEL	0x30
+
+#define VIA_CRDR_SDEXTCTRL	0x34
+#define VIS_CRDR_SDEXTCTRL_AUTOSTOP_SD	0x01
+#define VIS_CRDR_SDEXTCTRL_SHIFT_9	0x02
+#define VIS_CRDR_SDEXTCTRL_MMC_8BIT	0x04
+#define VIS_CRDR_SDEXTCTRL_RELD_BLK	0x08
+#define VIS_CRDR_SDEXTCTRL_BAD_CMDA	0x10
+#define VIS_CRDR_SDEXTCTRL_BAD_DATA	0x20
+#define VIS_CRDR_SDEXTCTRL_AUTOSTOP_SPI	0x40
+#define VIA_CRDR_SDEXTCTRL_HISPD	0x80
+/* 0x38-0xFF reserved */
+
+/*
+ * Data DMA Control Registers
+ */
+
+#define VIA_CRDR_DMABASEADD	0x0
+#define VIA_CRDR_DMACOUNTER	0x4
+
+#define VIA_CRDR_DMACTRL	0x8
+/*
+ * DIR :Transaction Direction
+ * 0 : From card to memory
+ * 1 : From memory to card
+ */
+#define VIA_CRDR_DMACTRL_DIR		0x100
+#define VIA_CRDR_DMACTRL_ENIRQ		0x10000
+#define VIA_CRDR_DMACTRL_SFTRST		0x1000000
+
+#define VIA_CRDR_DMASTS		0xc
+
+#define VIA_CRDR_DMASTART	0x10
+/*0x14-0xFF reserved*/
+
+/*
+ * PCI Control Registers
+ */
+
+/*0x0 - 0x1 reserved*/
+#define VIA_CRDR_PCICLKGATT	0x2
+/*
+ * SFTRST :
+ * 0 : Soft reset all the controller and it will be de-asserted automatically
+ * 1 : Soft reset is de-asserted
+ */
+#define VIA_CRDR_PCICLKGATT_SFTRST	0x01
+/*
+ * 3V3 : Pad power select
+ * 0 : 1.8V
+ * 1 : 3.3V
+ * NOTE : No mater what the actual value should be, this bit always
+ * read as 0. This is a hardware bug.
+ */
+#define VIA_CRDR_PCICLKGATT_3V3	0x10
+/*
+ * PAD_PWRON : Pad Power on/off select
+ * 0 : Power off
+ * 1 : Power on
+  * NOTE : No mater what the actual value should be, this bit always
+ * read as 0. This is a hardware bug.
+ */
+#define VIA_CRDR_PCICLKGATT_PAD_PWRON	0x20
+
+#define VIA_CRDR_PCISDCCLK	0x5
+
+#define VIA_CRDR_PCIDMACLK	0x7
+#define VIA_CRDR_PCIDMACLK_SDC		0x2
+
+#define VIA_CRDR_PCIINTCTRL	0x8
+#define VIA_CRDR_PCIINTCTRL_SDCIRQEN	0x04
+
+#define VIA_CRDR_PCIINTSTATUS	0x9
+#define VIA_CRDR_PCIINTSTATUS_SDC	0x04
+
+#define  VIA_CRDR_PCITMOCTRL	0xa
+#define VIA_CRDR_PCITMOCTRL_NO		0x0
+#define VIA_CRDR_PCITMOCTRL_32US	0x1
+#define VIA_CRDR_PCITMOCTRL_256US	0x2
+#define VIA_CRDR_PCITMOCTRL_1024US	0x3
+#define VIA_CRDR_PCITMOCTRL_256MS	0x4
+#define VIA_CRDR_PCITMOCTRL_512MS	0x5
+#define VIA_CRDR_PCITMOCTRL_1024MS	0x6
+
+/*0xB-0xFF reserved*/
+
+enum PCI_HOST_CLK_CONTROL {
+	PCI_CLK_375K = 0x03,
+	PCI_CLK_8M = 0x04,
+	PCI_CLK_12M = 0x00,
+	PCI_CLK_16M = 0x05,
+	PCI_CLK_24M = 0x01,
+	PCI_CLK_33M = 0x06,
+	PCI_CLK_48M = 0x02
+};
+
+struct sdhcreg {
+	u32 sdcontrol_reg;
+	u32 sdcmdarg_reg;
+	u32 sdbusmode_reg;
+	u32 sdblklen_reg;
+	u32 sdresp_reg[4];
+	u32 sdcurblkcnt_reg;
+	u32 sdintmask_reg;
+	u32 sdstatus_reg;
+	u32 sdrsptmo_reg;
+	u32 sdclksel_reg;
+	u32 sdextctrl_reg;
+};
+
+struct pcictrlreg {
+	u8 reserve[2];
+	u8 pciclkgat_reg;
+	u8 pcinfcclk_reg;
+	u8 pcimscclk_reg;
+	u8 pcisdclk_reg;
+	u8 pcicaclk_reg;
+	u8 pcidmaclk_reg;
+	u8 pciintctrl_reg;
+	u8 pciintstatus_reg;
+	u8 pcitmoctrl_reg;
+	u8 Resv;
+};
+
+struct via_crdr_mmc_host {
+	struct mmc_host *mmc;
+	struct mmc_request *mrq;
+	struct mmc_command *cmd;
+	struct mmc_data *data;
+
+	void __iomem *mmiobase;
+	void __iomem *sdhc_mmiobase;
+	void __iomem *ddma_mmiobase;
+	void __iomem *pcictrl_mmiobase;
+
+	struct pcictrlreg pm_pcictrl_reg;
+	struct sdhcreg pm_sdhc_reg;
+
+	struct work_struct carddet_work;
+	struct tasklet_struct finish_tasklet;
+
+	struct timer_list timer;
+	spinlock_t lock;
+	u8 power;
+	int reject;
+	unsigned int quirks;
+};
+
+/* some devices need a very long delay for power to stabilize */
+#define VIA_CRDR_QUIRK_300MS_PWRDELAY	0x0001
+
+static struct pci_device_id via_ids[] = {
+	{PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_9530,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
+	{0,}
+};
+
+MODULE_DEVICE_TABLE(pci, via_ids);
+
+static void via_print_sdchc(struct via_crdr_mmc_host *host)
+{
+	void __iomem *addrbase = host->sdhc_mmiobase;
+
+	pr_debug("SDC MMIO Registers:\n");
+	pr_debug("SDCONTROL=%08x, SDCMDARG=%08x, SDBUSMODE=%08x\n",
+		 readl(addrbase + VIA_CRDR_SDCTRL),
+		 readl(addrbase + VIA_CRDR_SDCARG),
+		 readl(addrbase + VIA_CRDR_SDBUSMODE));
+	pr_debug("SDBLKLEN=%08x, SDCURBLKCNT=%08x, SDINTMASK=%08x\n",
+		 readl(addrbase + VIA_CRDR_SDBLKLEN),
+		 readl(addrbase + VIA_CRDR_SDCURBLKCNT),
+		 readl(addrbase + VIA_CRDR_SDINTMASK));
+	pr_debug("SDSTATUS=%08x, SDCLKSEL=%08x, SDEXTCTRL=%08x\n",
+		 readl(addrbase + VIA_CRDR_SDSTATUS),
+		 readl(addrbase + VIA_CRDR_SDCLKSEL),
+		 readl(addrbase + VIA_CRDR_SDEXTCTRL));
+}
+
+static void via_print_pcictrl(struct via_crdr_mmc_host *host)
+{
+	void __iomem *addrbase = host->pcictrl_mmiobase;
+
+	pr_debug("PCI Control Registers:\n");
+	pr_debug("PCICLKGATT=%02x, PCISDCCLK=%02x, PCIDMACLK=%02x\n",
+		 readb(addrbase + VIA_CRDR_PCICLKGATT),
+		 readb(addrbase + VIA_CRDR_PCISDCCLK),
+		 readb(addrbase + VIA_CRDR_PCIDMACLK));
+	pr_debug("PCIINTCTRL=%02x, PCIINTSTATUS=%02x\n",
+		 readb(addrbase + VIA_CRDR_PCIINTCTRL),
+		 readb(addrbase + VIA_CRDR_PCIINTSTATUS));
+}
+
+static void via_save_pcictrlreg(struct via_crdr_mmc_host *host)
+{
+	struct pcictrlreg *pm_pcictrl_reg;
+	void __iomem *addrbase;
+
+	pm_pcictrl_reg = &(host->pm_pcictrl_reg);
+	addrbase = host->pcictrl_mmiobase;
+
+	pm_pcictrl_reg->pciclkgat_reg = readb(addrbase + VIA_CRDR_PCICLKGATT);
+	pm_pcictrl_reg->pciclkgat_reg |=
+		VIA_CRDR_PCICLKGATT_3V3 | VIA_CRDR_PCICLKGATT_PAD_PWRON;
+	pm_pcictrl_reg->pcisdclk_reg = readb(addrbase + VIA_CRDR_PCISDCCLK);
+	pm_pcictrl_reg->pcidmaclk_reg = readb(addrbase + VIA_CRDR_PCIDMACLK);
+	pm_pcictrl_reg->pciintctrl_reg = readb(addrbase + VIA_CRDR_PCIINTCTRL);
+	pm_pcictrl_reg->pciintstatus_reg =
+		readb(addrbase + VIA_CRDR_PCIINTSTATUS);
+	pm_pcictrl_reg->pcitmoctrl_reg = readb(addrbase + VIA_CRDR_PCITMOCTRL);
+}
+
+static void via_restore_pcictrlreg(struct via_crdr_mmc_host *host)
+{
+	struct pcictrlreg *pm_pcictrl_reg;
+	void __iomem *addrbase;
+
+	pm_pcictrl_reg = &(host->pm_pcictrl_reg);
+	addrbase = host->pcictrl_mmiobase;
+
+	writeb(pm_pcictrl_reg->pciclkgat_reg, addrbase + VIA_CRDR_PCICLKGATT);
+	writeb(pm_pcictrl_reg->pcisdclk_reg, addrbase + VIA_CRDR_PCISDCCLK);
+	writeb(pm_pcictrl_reg->pcidmaclk_reg, addrbase + VIA_CRDR_PCIDMACLK);
+	writeb(pm_pcictrl_reg->pciintctrl_reg, addrbase + VIA_CRDR_PCIINTCTRL);
+	writeb(pm_pcictrl_reg->pciintstatus_reg,
+		addrbase + VIA_CRDR_PCIINTSTATUS);
+	writeb(pm_pcictrl_reg->pcitmoctrl_reg, addrbase + VIA_CRDR_PCITMOCTRL);
+}
+
+static void via_save_sdcreg(struct via_crdr_mmc_host *host)
+{
+	struct sdhcreg *pm_sdhc_reg;
+	void __iomem *addrbase;
+
+	pm_sdhc_reg = &(host->pm_sdhc_reg);
+	addrbase = host->sdhc_mmiobase;
+
+	pm_sdhc_reg->sdcontrol_reg = readl(addrbase + VIA_CRDR_SDCTRL);
+	pm_sdhc_reg->sdcmdarg_reg = readl(addrbase + VIA_CRDR_SDCARG);
+	pm_sdhc_reg->sdbusmode_reg = readl(addrbase + VIA_CRDR_SDBUSMODE);
+	pm_sdhc_reg->sdblklen_reg = readl(addrbase + VIA_CRDR_SDBLKLEN);
+	pm_sdhc_reg->sdcurblkcnt_reg = readl(addrbase + VIA_CRDR_SDCURBLKCNT);
+	pm_sdhc_reg->sdintmask_reg = readl(addrbase + VIA_CRDR_SDINTMASK);
+	pm_sdhc_reg->sdstatus_reg = readl(addrbase + VIA_CRDR_SDSTATUS);
+	pm_sdhc_reg->sdrsptmo_reg = readl(addrbase + VIA_CRDR_SDRSPTMO);
+	pm_sdhc_reg->sdclksel_reg = readl(addrbase + VIA_CRDR_SDCLKSEL);
+	pm_sdhc_reg->sdextctrl_reg = readl(addrbase + VIA_CRDR_SDEXTCTRL);
+}
+
+static void via_restore_sdcreg(struct via_crdr_mmc_host *host)
+{
+	struct sdhcreg *pm_sdhc_reg;
+	void __iomem *addrbase;
+
+	pm_sdhc_reg = &(host->pm_sdhc_reg);
+	addrbase = host->sdhc_mmiobase;
+
+	writel(pm_sdhc_reg->sdcontrol_reg, addrbase + VIA_CRDR_SDCTRL);
+	writel(pm_sdhc_reg->sdcmdarg_reg, addrbase + VIA_CRDR_SDCARG);
+	writel(pm_sdhc_reg->sdbusmode_reg, addrbase + VIA_CRDR_SDBUSMODE);
+	writel(pm_sdhc_reg->sdblklen_reg, addrbase + VIA_CRDR_SDBLKLEN);
+	writel(pm_sdhc_reg->sdcurblkcnt_reg, addrbase + VIA_CRDR_SDCURBLKCNT);
+	writel(pm_sdhc_reg->sdintmask_reg, addrbase + VIA_CRDR_SDINTMASK);
+	writel(pm_sdhc_reg->sdstatus_reg, addrbase + VIA_CRDR_SDSTATUS);
+	writel(pm_sdhc_reg->sdrsptmo_reg, addrbase + VIA_CRDR_SDRSPTMO);
+	writel(pm_sdhc_reg->sdclksel_reg, addrbase + VIA_CRDR_SDCLKSEL);
+	writel(pm_sdhc_reg->sdextctrl_reg, addrbase + VIA_CRDR_SDEXTCTRL);
+}
+
+static void via_pwron_sleep(struct via_crdr_mmc_host *sdhost)
+{
+	if (sdhost->quirks & VIA_CRDR_QUIRK_300MS_PWRDELAY)
+		msleep(300);
+	else
+		msleep(3);
+}
+
+static void via_set_ddma(struct via_crdr_mmc_host *host,
+			 dma_addr_t dmaaddr, u32 count, int dir, int enirq)
+{
+	void __iomem *addrbase;
+	u32 ctrl_data = 0;
+
+	if (enirq)
+		ctrl_data |= VIA_CRDR_DMACTRL_ENIRQ;
+
+	if (dir)
+		ctrl_data |= VIA_CRDR_DMACTRL_DIR;
+
+	addrbase = host->ddma_mmiobase;
+
+	writel(dmaaddr, addrbase + VIA_CRDR_DMABASEADD);
+	writel(count, addrbase + VIA_CRDR_DMACOUNTER);
+	writel(ctrl_data, addrbase + VIA_CRDR_DMACTRL);
+	writel(0x01, addrbase + VIA_CRDR_DMASTART);
+
+	/* It seems that our DMA can not work normally with 375kHz clock */
+	/* FIXME: don't brute-force 8MHz but use PIO at 375kHz !! */
+	addrbase = host->pcictrl_mmiobase;
+	if (readb(addrbase + VIA_CRDR_PCISDCCLK) == PCI_CLK_375K) {
+		dev_info(host->mmc->parent, "forcing card speed to 8MHz\n");
+		writeb(PCI_CLK_8M, addrbase + VIA_CRDR_PCISDCCLK);
+	}
+}
+
+static void via_sdc_preparedata(struct via_crdr_mmc_host *host,
+				struct mmc_data *data)
+{
+	void __iomem *addrbase;
+	u32 blk_reg;
+	int count;
+
+	WARN_ON(host->data);
+
+	/* Sanity checks */
+	BUG_ON(data->blksz > host->mmc->max_blk_size);
+	BUG_ON(data->blocks > host->mmc->max_blk_count);
+
+	host->data = data;
+
+	count = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+		((data->flags & MMC_DATA_READ) ?
+		PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE));
+	BUG_ON(count != 1);
+
+	via_set_ddma(host, sg_dma_address(data->sg), sg_dma_len(data->sg),
+		(data->flags & MMC_DATA_WRITE) ? 1 : 0, 1);
+
+	addrbase = host->sdhc_mmiobase;
+
+	blk_reg = data->blksz - 1;
+	blk_reg |= VIA_CRDR_SDBLKLEN_GPIDET | VIA_CRDR_SDBLKLEN_INTEN;
+	blk_reg |= (data->blocks) << 16;
+
+	writel(blk_reg, addrbase + VIA_CRDR_SDBLKLEN);
+}
+
+static void via_sdc_get_response(struct via_crdr_mmc_host *host,
+				 struct mmc_command *cmd)
+{
+	void __iomem *addrbase = host->sdhc_mmiobase;
+	u32 dwdata0 = readl(addrbase + VIA_CRDR_SDRESP0);
+	u32 dwdata1 = readl(addrbase + VIA_CRDR_SDRESP1);
+	u32 dwdata2 = readl(addrbase + VIA_CRDR_SDRESP2);
+	u32 dwdata3 = readl(addrbase + VIA_CRDR_SDRESP3);
+
+	if (cmd->flags & MMC_RSP_136) {
+		cmd->resp[0] = ((u8) (dwdata1)) |
+		    (((u8) (dwdata0 >> 24)) << 8) |
+		    (((u8) (dwdata0 >> 16)) << 16) |
+		    (((u8) (dwdata0 >> 8)) << 24);
+
+		cmd->resp[1] = ((u8) (dwdata2)) |
+		    (((u8) (dwdata1 >> 24)) << 8) |
+		    (((u8) (dwdata1 >> 16)) << 16) |
+		    (((u8) (dwdata1 >> 8)) << 24);
+
+		cmd->resp[2] = ((u8) (dwdata3)) |
+		    (((u8) (dwdata2 >> 24)) << 8) |
+		    (((u8) (dwdata2 >> 16)) << 16) |
+		    (((u8) (dwdata2 >> 8)) << 24);
+
+		cmd->resp[3] = 0xff |
+		    ((((u8) (dwdata3 >> 24))) << 8) |
+		    (((u8) (dwdata3 >> 16)) << 16) |
+		    (((u8) (dwdata3 >> 8)) << 24);
+	} else {
+		dwdata0 >>= 8;
+		cmd->resp[0] = ((dwdata0 & 0xff) << 24) |
+		    (((dwdata0 >> 8) & 0xff) << 16) |
+		    (((dwdata0 >> 16) & 0xff) << 8) | (dwdata1 & 0xff);
+
+		dwdata1 >>= 8;
+		cmd->resp[1] = ((dwdata1 & 0xff) << 24) |
+		    (((dwdata1 >> 8) & 0xff) << 16) |
+		    (((dwdata1 >> 16) & 0xff) << 8);
+	}
+}
+
+static void via_sdc_send_command(struct via_crdr_mmc_host *host,
+				 struct mmc_command *cmd)
+{
+	void __iomem *addrbase;
+	struct mmc_data *data;
+	u32 cmdctrl = 0;
+
+	WARN_ON(host->cmd);
+
+	data = cmd->data;
+	mod_timer(&host->timer, jiffies + HZ);
+	host->cmd = cmd;
+
+	/*Command index*/
+	cmdctrl = cmd->opcode << 8;
+
+	/*Response type*/
+	switch (mmc_resp_type(cmd)) {
+	case MMC_RSP_NONE:
+		cmdctrl |= VIA_CRDR_SDCTRL_RSP_NONE;
+		break;
+	case MMC_RSP_R1:
+		cmdctrl |= VIA_CRDR_SDCTRL_RSP_R1;
+		break;
+	case MMC_RSP_R1B:
+		cmdctrl |= VIA_CRDR_SDCTRL_RSP_R1B;
+		break;
+	case MMC_RSP_R2:
+		cmdctrl |= VIA_CRDR_SDCTRL_RSP_R2;
+		break;
+	case MMC_RSP_R3:
+		cmdctrl |= VIA_CRDR_SDCTRL_RSP_R3;
+		break;
+	default:
+		pr_err("%s: cmd->flag is not valid\n", mmc_hostname(host->mmc));
+		break;
+	}
+
+	if (!(cmd->data))
+		goto nodata;
+
+	via_sdc_preparedata(host, data);
+
+	/*Command control*/
+	if (data->blocks > 1) {
+		if (data->flags & MMC_DATA_WRITE) {
+			cmdctrl |= VIA_CRDR_SDCTRL_WRITE;
+			cmdctrl |= VIA_CRDR_SDCTRL_MULTI_WR;
+		} else {
+			cmdctrl |= VIA_CRDR_SDCTRL_MULTI_RD;
+		}
+	} else {
+		if (data->flags & MMC_DATA_WRITE) {
+			cmdctrl |= VIA_CRDR_SDCTRL_WRITE;
+			cmdctrl |= VIA_CRDR_SDCTRL_SINGLE_WR;
+		} else {
+			cmdctrl |= VIA_CRDR_SDCTRL_SINGLE_RD;
+		}
+	}
+
+nodata:
+	if (cmd == host->mrq->stop)
+		cmdctrl |= VIA_CRDR_SDCTRL_STOP;
+
+	cmdctrl |= VIA_CRDR_SDCTRL_START;
+
+	addrbase = host->sdhc_mmiobase;
+	writel(cmd->arg, addrbase + VIA_CRDR_SDCARG);
+	writel(cmdctrl, addrbase + VIA_CRDR_SDCTRL);
+}
+
+static void via_sdc_finish_data(struct via_crdr_mmc_host *host)
+{
+	struct mmc_data *data;
+
+	BUG_ON(!host->data);
+
+	data = host->data;
+	host->data = NULL;
+
+	if (data->error)
+		data->bytes_xfered = 0;
+	else
+		data->bytes_xfered = data->blocks * data->blksz;
+
+	dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+		((data->flags & MMC_DATA_READ) ?
+		PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE));
+
+	if (data->stop)
+		via_sdc_send_command(host, data->stop);
+	else
+		tasklet_schedule(&host->finish_tasklet);
+}
+
+static void via_sdc_finish_command(struct via_crdr_mmc_host *host)
+{
+	via_sdc_get_response(host, host->cmd);
+
+	host->cmd->error = 0;
+
+	if (!host->cmd->data)
+		tasklet_schedule(&host->finish_tasklet);
+
+	host->cmd = NULL;
+}
+
+static void via_sdc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	void __iomem *addrbase;
+	struct via_crdr_mmc_host *host;
+	unsigned long flags;
+	u16 status;
+
+	host = mmc_priv(mmc);
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	addrbase = host->pcictrl_mmiobase;
+	writeb(VIA_CRDR_PCIDMACLK_SDC, addrbase + VIA_CRDR_PCIDMACLK);
+
+	status = readw(host->sdhc_mmiobase + VIA_CRDR_SDSTATUS);
+	status &= VIA_CRDR_SDSTS_W1C_MASK;
+	writew(status, host->sdhc_mmiobase + VIA_CRDR_SDSTATUS);
+
+	WARN_ON(host->mrq != NULL);
+	host->mrq = mrq;
+
+	status = readw(host->sdhc_mmiobase + VIA_CRDR_SDSTATUS);
+	if (!(status & VIA_CRDR_SDSTS_SLOTG) || host->reject) {
+		host->mrq->cmd->error = -ENOMEDIUM;
+		tasklet_schedule(&host->finish_tasklet);
+	} else {
+		via_sdc_send_command(host, mrq->cmd);
+	}
+
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void via_sdc_set_power(struct via_crdr_mmc_host *host,
+			      unsigned short power, unsigned int on)
+{
+	unsigned long flags;
+	u8 gatt;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	host->power = (1 << power);
+
+	gatt = readb(host->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+	if (host->power == MMC_VDD_165_195)
+		gatt &= ~VIA_CRDR_PCICLKGATT_3V3;
+	else
+		gatt |= VIA_CRDR_PCICLKGATT_3V3;
+	if (on)
+		gatt |= VIA_CRDR_PCICLKGATT_PAD_PWRON;
+	else
+		gatt &= ~VIA_CRDR_PCICLKGATT_PAD_PWRON;
+	writeb(gatt, host->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	via_pwron_sleep(host);
+}
+
+static void via_sdc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct via_crdr_mmc_host *host;
+	unsigned long flags;
+	void __iomem *addrbase;
+	u32 org_data, sdextctrl;
+	u8 clock;
+
+	host = mmc_priv(mmc);
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	addrbase = host->sdhc_mmiobase;
+	org_data = readl(addrbase + VIA_CRDR_SDBUSMODE);
+	sdextctrl = readl(addrbase + VIA_CRDR_SDEXTCTRL);
+
+	if (ios->bus_width == MMC_BUS_WIDTH_1)
+		org_data &= ~VIA_CRDR_SDMODE_4BIT;
+	else
+		org_data |= VIA_CRDR_SDMODE_4BIT;
+
+	if (ios->power_mode == MMC_POWER_OFF)
+		org_data &= ~VIA_CRDR_SDMODE_CLK_ON;
+	else
+		org_data |= VIA_CRDR_SDMODE_CLK_ON;
+
+	if (ios->timing == MMC_TIMING_SD_HS)
+		sdextctrl |= VIA_CRDR_SDEXTCTRL_HISPD;
+	else
+		sdextctrl &= ~VIA_CRDR_SDEXTCTRL_HISPD;
+
+	writel(org_data, addrbase + VIA_CRDR_SDBUSMODE);
+	writel(sdextctrl, addrbase + VIA_CRDR_SDEXTCTRL);
+
+	if (ios->clock >= 48000000)
+		clock = PCI_CLK_48M;
+	else if (ios->clock >= 33000000)
+		clock = PCI_CLK_33M;
+	else if (ios->clock >= 24000000)
+		clock = PCI_CLK_24M;
+	else if (ios->clock >= 16000000)
+		clock = PCI_CLK_16M;
+	else if (ios->clock >= 12000000)
+		clock = PCI_CLK_12M;
+	else if (ios->clock >=  8000000)
+		clock = PCI_CLK_8M;
+	else
+		clock = PCI_CLK_375K;
+
+	addrbase = host->pcictrl_mmiobase;
+	if (readb(addrbase + VIA_CRDR_PCISDCCLK) != clock)
+		writeb(clock, addrbase + VIA_CRDR_PCISDCCLK);
+
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	if (ios->power_mode != MMC_POWER_OFF)
+		via_sdc_set_power(host, ios->vdd, 1);
+	else
+		via_sdc_set_power(host, ios->vdd, 0);
+}
+
+static int via_sdc_get_ro(struct mmc_host *mmc)
+{
+	struct via_crdr_mmc_host *host;
+	unsigned long flags;
+	u16 status;
+
+	host = mmc_priv(mmc);
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	status = readw(host->sdhc_mmiobase + VIA_CRDR_SDSTATUS);
+
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	return !(status & VIA_CRDR_SDSTS_WP);
+}
+
+static const struct mmc_host_ops via_sdc_ops = {
+	.request = via_sdc_request,
+	.set_ios = via_sdc_set_ios,
+	.get_ro = via_sdc_get_ro,
+};
+
+static void via_reset_pcictrl(struct via_crdr_mmc_host *host)
+{
+	void __iomem *addrbase;
+	unsigned long flags;
+	u8 gatt;
+
+	addrbase = host->pcictrl_mmiobase;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	via_save_pcictrlreg(host);
+	via_save_sdcreg(host);
+
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	gatt = VIA_CRDR_PCICLKGATT_PAD_PWRON;
+	if (host->power == MMC_VDD_165_195)
+		gatt &= VIA_CRDR_PCICLKGATT_3V3;
+	else
+		gatt |= VIA_CRDR_PCICLKGATT_3V3;
+	writeb(gatt, host->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+	via_pwron_sleep(host);
+	gatt |= VIA_CRDR_PCICLKGATT_SFTRST;
+	writeb(gatt, host->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+	msleep(3);
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	via_restore_pcictrlreg(host);
+	via_restore_sdcreg(host);
+
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void via_sdc_cmd_isr(struct via_crdr_mmc_host *host, u16 intmask)
+{
+	BUG_ON(intmask == 0);
+
+	if (!host->cmd) {
+		pr_err("%s: Got command interrupt 0x%x even "
+		       "though no command operation was in progress.\n",
+		       mmc_hostname(host->mmc), intmask);
+		return;
+	}
+
+	if (intmask & VIA_CRDR_SDSTS_CRTO)
+		host->cmd->error = -ETIMEDOUT;
+	else if (intmask & VIA_CRDR_SDSTS_SC)
+		host->cmd->error = -EILSEQ;
+
+	if (host->cmd->error)
+		tasklet_schedule(&host->finish_tasklet);
+	else if (intmask & VIA_CRDR_SDSTS_CRD)
+		via_sdc_finish_command(host);
+}
+
+static void via_sdc_data_isr(struct via_crdr_mmc_host *host, u16 intmask)
+{
+	BUG_ON(intmask == 0);
+
+	if (intmask & VIA_CRDR_SDSTS_DT)
+		host->data->error = -ETIMEDOUT;
+	else if (intmask & (VIA_CRDR_SDSTS_RC | VIA_CRDR_SDSTS_WC))
+		host->data->error = -EILSEQ;
+
+	via_sdc_finish_data(host);
+}
+
+static irqreturn_t via_sdc_isr(int irq, void *dev_id)
+{
+	struct via_crdr_mmc_host *sdhost = dev_id;
+	void __iomem *addrbase;
+	u8 pci_status;
+	u16 sd_status;
+	irqreturn_t result;
+
+	if (!sdhost)
+		return IRQ_NONE;
+
+	spin_lock(&sdhost->lock);
+
+	addrbase = sdhost->pcictrl_mmiobase;
+	pci_status = readb(addrbase + VIA_CRDR_PCIINTSTATUS);
+	if (!(pci_status & VIA_CRDR_PCIINTSTATUS_SDC)) {
+		result = IRQ_NONE;
+		goto out;
+	}
+
+	addrbase = sdhost->sdhc_mmiobase;
+	sd_status = readw(addrbase + VIA_CRDR_SDSTATUS);
+	sd_status &= VIA_CRDR_SDSTS_INT_MASK;
+	sd_status &= ~VIA_CRDR_SDSTS_IGN_MASK;
+	if (!sd_status) {
+		result = IRQ_NONE;
+		goto out;
+	}
+
+	if (sd_status & VIA_CRDR_SDSTS_CIR) {
+		writew(sd_status & VIA_CRDR_SDSTS_CIR,
+			addrbase + VIA_CRDR_SDSTATUS);
+
+		schedule_work(&sdhost->carddet_work);
+	}
+
+	sd_status &= ~VIA_CRDR_SDSTS_CIR;
+	if (sd_status & VIA_CRDR_SDSTS_CMD_MASK) {
+		writew(sd_status & VIA_CRDR_SDSTS_CMD_MASK,
+			addrbase + VIA_CRDR_SDSTATUS);
+		via_sdc_cmd_isr(sdhost, sd_status & VIA_CRDR_SDSTS_CMD_MASK);
+	}
+	if (sd_status & VIA_CRDR_SDSTS_DATA_MASK) {
+		writew(sd_status & VIA_CRDR_SDSTS_DATA_MASK,
+			addrbase + VIA_CRDR_SDSTATUS);
+		via_sdc_data_isr(sdhost, sd_status & VIA_CRDR_SDSTS_DATA_MASK);
+	}
+
+	sd_status &= ~(VIA_CRDR_SDSTS_CMD_MASK | VIA_CRDR_SDSTS_DATA_MASK);
+	if (sd_status) {
+		pr_err("%s: Unexpected interrupt 0x%x\n",
+		       mmc_hostname(sdhost->mmc), sd_status);
+		writew(sd_status, addrbase + VIA_CRDR_SDSTATUS);
+	}
+
+	result = IRQ_HANDLED;
+
+	mmiowb();
+out:
+	spin_unlock(&sdhost->lock);
+
+	return result;
+}
+
+static void via_sdc_timeout(unsigned long ulongdata)
+{
+	struct via_crdr_mmc_host *sdhost;
+	unsigned long flags;
+
+	sdhost = (struct via_crdr_mmc_host *)ulongdata;
+
+	spin_lock_irqsave(&sdhost->lock, flags);
+
+	if (sdhost->mrq) {
+		pr_err("%s: Timeout waiting for hardware interrupt."
+		       "cmd:0x%x\n", mmc_hostname(sdhost->mmc),
+		       sdhost->mrq->cmd->opcode);
+
+		if (sdhost->data) {
+			writel(VIA_CRDR_DMACTRL_SFTRST,
+				sdhost->ddma_mmiobase + VIA_CRDR_DMACTRL);
+			sdhost->data->error = -ETIMEDOUT;
+			via_sdc_finish_data(sdhost);
+		} else {
+			if (sdhost->cmd)
+				sdhost->cmd->error = -ETIMEDOUT;
+			else
+				sdhost->mrq->cmd->error = -ETIMEDOUT;
+			tasklet_schedule(&sdhost->finish_tasklet);
+		}
+	}
+
+	mmiowb();
+	spin_unlock_irqrestore(&sdhost->lock, flags);
+}
+
+static void via_sdc_tasklet_finish(unsigned long param)
+{
+	struct via_crdr_mmc_host *host;
+	unsigned long flags;
+	struct mmc_request *mrq;
+
+	host = (struct via_crdr_mmc_host *)param;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	del_timer(&host->timer);
+	mrq = host->mrq;
+	host->mrq = NULL;
+	host->cmd = NULL;
+	host->data = NULL;
+
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	mmc_request_done(host->mmc, mrq);
+}
+
+static void via_sdc_card_detect(struct work_struct *work)
+{
+	struct via_crdr_mmc_host *host;
+	void __iomem *addrbase;
+	unsigned long flags;
+	u16 status;
+
+	host = container_of(work, struct via_crdr_mmc_host, carddet_work);
+
+	addrbase = host->ddma_mmiobase;
+	writel(VIA_CRDR_DMACTRL_SFTRST, addrbase + VIA_CRDR_DMACTRL);
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	addrbase = host->pcictrl_mmiobase;
+	writeb(VIA_CRDR_PCIDMACLK_SDC, addrbase + VIA_CRDR_PCIDMACLK);
+
+	addrbase = host->sdhc_mmiobase;
+	status = readw(addrbase + VIA_CRDR_SDSTATUS);
+	if (!(status & VIA_CRDR_SDSTS_SLOTG)) {
+		if (host->mrq) {
+			pr_err("%s: Card removed during transfer!\n",
+			       mmc_hostname(host->mmc));
+			host->mrq->cmd->error = -ENOMEDIUM;
+			tasklet_schedule(&host->finish_tasklet);
+		}
+
+		mmiowb();
+		spin_unlock_irqrestore(&host->lock, flags);
+
+		via_reset_pcictrl(host);
+
+		spin_lock_irqsave(&host->lock, flags);
+	}
+
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	via_print_pcictrl(host);
+	via_print_sdchc(host);
+
+	mmc_detect_change(host->mmc, msecs_to_jiffies(500));
+}
+
+static void via_init_mmc_host(struct via_crdr_mmc_host *host)
+{
+	struct mmc_host *mmc = host->mmc;
+	void __iomem *addrbase;
+	u32 lenreg;
+	u32 status;
+
+	init_timer(&host->timer);
+	host->timer.data = (unsigned long)host;
+	host->timer.function = via_sdc_timeout;
+
+	spin_lock_init(&host->lock);
+
+	mmc->f_min = VIA_CRDR_MIN_CLOCK;
+	mmc->f_max = VIA_CRDR_MAX_CLOCK;
+	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
+	mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED;
+	mmc->ops = &via_sdc_ops;
+
+	/*Hardware cannot do scatter lists*/
+	mmc->max_hw_segs = 1;
+	mmc->max_phys_segs = 1;
+
+	mmc->max_blk_size = VIA_CRDR_MAX_BLOCK_LENGTH;
+	mmc->max_blk_count = VIA_CRDR_MAX_BLOCK_COUNT;
+
+	mmc->max_seg_size = mmc->max_blk_size * mmc->max_blk_count;
+	mmc->max_req_size = mmc->max_seg_size;
+
+	INIT_WORK(&host->carddet_work, via_sdc_card_detect);
+
+	tasklet_init(&host->finish_tasklet, via_sdc_tasklet_finish,
+		     (unsigned long)host);
+
+	addrbase = host->sdhc_mmiobase;
+	writel(0x0, addrbase + VIA_CRDR_SDINTMASK);
+	msleep(1);
+
+	lenreg = VIA_CRDR_SDBLKLEN_GPIDET | VIA_CRDR_SDBLKLEN_INTEN;
+	writel(lenreg, addrbase + VIA_CRDR_SDBLKLEN);
+
+	status = readw(addrbase + VIA_CRDR_SDSTATUS);
+	status &= VIA_CRDR_SDSTS_W1C_MASK;
+	writew(status, addrbase + VIA_CRDR_SDSTATUS);
+
+	status = readw(addrbase + VIA_CRDR_SDSTATUS2);
+	status |= VIA_CRDR_SDSTS_CFE;
+	writew(status, addrbase + VIA_CRDR_SDSTATUS2);
+
+	writeb(0x0, addrbase + VIA_CRDR_SDEXTCTRL);
+
+	writel(VIA_CRDR_SDACTIVE_INTMASK, addrbase + VIA_CRDR_SDINTMASK);
+	msleep(1);
+}
+
+static int __devinit via_sd_probe(struct pci_dev *pcidev,
+				    const struct pci_device_id *id)
+{
+	struct mmc_host *mmc;
+	struct via_crdr_mmc_host *sdhost;
+	u32 base, len;
+	u8 rev, gatt;
+	int ret;
+
+	pci_read_config_byte(pcidev, PCI_CLASS_REVISION, &rev);
+	pr_info(DRV_NAME
+		": VIA SDMMC controller found at %s [%04x:%04x] (rev %x)\n",
+		pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device,
+		(int)rev);
+
+	ret = pci_enable_device(pcidev);
+	if (ret)
+		return ret;
+
+	ret = pci_request_regions(pcidev, DRV_NAME);
+	if (ret)
+		goto disable;
+
+	pci_write_config_byte(pcidev, VIA_CRDR_PCI_WORK_MODE, 0);
+	pci_write_config_byte(pcidev, VIA_CRDR_PCI_DBG_MODE, 0);
+
+	mmc = mmc_alloc_host(sizeof(struct via_crdr_mmc_host), &pcidev->dev);
+	if (!mmc) {
+		ret = -ENOMEM;
+		goto release;
+	}
+
+	sdhost = mmc_priv(mmc);
+	sdhost->mmc = mmc;
+	dev_set_drvdata(&pcidev->dev, sdhost);
+
+	len = pci_resource_len(pcidev, 0);
+	base = pci_resource_start(pcidev, 0);
+	sdhost->mmiobase = ioremap_nocache(base, len);
+	if (!sdhost->mmiobase) {
+		ret = -ENOMEM;
+		goto free_mmc_host;
+	}
+
+	sdhost->sdhc_mmiobase =
+		sdhost->mmiobase + VIA_CRDR_SDC_OFF;
+	sdhost->ddma_mmiobase =
+		sdhost->mmiobase + VIA_CRDR_DDMA_OFF;
+	sdhost->pcictrl_mmiobase =
+		sdhost->mmiobase + VIA_CRDR_PCICTRL_OFF;
+
+	sdhost->power = MMC_VDD_165_195;
+
+	gatt = VIA_CRDR_PCICLKGATT_3V3 | VIA_CRDR_PCICLKGATT_PAD_PWRON;
+	writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+	via_pwron_sleep(sdhost);
+	gatt |= VIA_CRDR_PCICLKGATT_SFTRST;
+	writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+	msleep(3);
+
+	via_init_mmc_host(sdhost);
+
+	ret =
+	    request_irq(pcidev->irq, via_sdc_isr, IRQF_SHARED, DRV_NAME,
+			sdhost);
+	if (ret)
+		goto unmap;
+
+	writeb(VIA_CRDR_PCIINTCTRL_SDCIRQEN,
+	       sdhost->pcictrl_mmiobase + VIA_CRDR_PCIINTCTRL);
+	writeb(VIA_CRDR_PCITMOCTRL_1024MS,
+	       sdhost->pcictrl_mmiobase + VIA_CRDR_PCITMOCTRL);
+
+	/* device-specific quirks */
+	if (pcidev->subsystem_vendor == PCI_VENDOR_ID_LENOVO &&
+	    pcidev->subsystem_device == 0x3891)
+		sdhost->quirks = VIA_CRDR_QUIRK_300MS_PWRDELAY;
+
+	mmc_add_host(mmc);
+
+	return 0;
+
+unmap:
+	iounmap(sdhost->mmiobase);
+free_mmc_host:
+	dev_set_drvdata(&pcidev->dev, NULL);
+	mmc_free_host(mmc);
+release:
+	pci_release_regions(pcidev);
+disable:
+	pci_disable_device(pcidev);
+
+	return ret;
+}
+
+static void __devexit via_sd_remove(struct pci_dev *pcidev)
+{
+	struct via_crdr_mmc_host *sdhost = pci_get_drvdata(pcidev);
+	unsigned long flags;
+	u8 gatt;
+
+	spin_lock_irqsave(&sdhost->lock, flags);
+
+	/* Ensure we don't accept more commands from mmc layer */
+	sdhost->reject = 1;
+
+	/* Disable generating further interrupts */
+	writeb(0x0, sdhost->pcictrl_mmiobase + VIA_CRDR_PCIINTCTRL);
+	mmiowb();
+
+	if (sdhost->mrq) {
+		printk(KERN_ERR "%s: Controller removed during "
+			"transfer\n", mmc_hostname(sdhost->mmc));
+
+		/* make sure all DMA is stopped */
+		writel(VIA_CRDR_DMACTRL_SFTRST,
+			sdhost->ddma_mmiobase + VIA_CRDR_DMACTRL);
+		mmiowb();
+		sdhost->mrq->cmd->error = -ENOMEDIUM;
+		if (sdhost->mrq->stop)
+			sdhost->mrq->stop->error = -ENOMEDIUM;
+		tasklet_schedule(&sdhost->finish_tasklet);
+	}
+	spin_unlock_irqrestore(&sdhost->lock, flags);
+
+	mmc_remove_host(sdhost->mmc);
+
+	free_irq(pcidev->irq, sdhost);
+
+	del_timer_sync(&sdhost->timer);
+
+	tasklet_kill(&sdhost->finish_tasklet);
+
+	/* switch off power */
+	gatt = readb(sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+	gatt &= ~VIA_CRDR_PCICLKGATT_PAD_PWRON;
+	writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+
+	iounmap(sdhost->mmiobase);
+	dev_set_drvdata(&pcidev->dev, NULL);
+	mmc_free_host(sdhost->mmc);
+	pci_release_regions(pcidev);
+	pci_disable_device(pcidev);
+
+	pr_info(DRV_NAME
+		": VIA SDMMC controller at %s [%04x:%04x] has been removed\n",
+		pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device);
+}
+
+#ifdef CONFIG_PM
+
+static void via_init_sdc_pm(struct via_crdr_mmc_host *host)
+{
+	struct sdhcreg *pm_sdhcreg;
+	void __iomem *addrbase;
+	u32 lenreg;
+	u16 status;
+
+	pm_sdhcreg = &(host->pm_sdhc_reg);
+	addrbase = host->sdhc_mmiobase;
+
+	writel(0x0, addrbase + VIA_CRDR_SDINTMASK);
+
+	lenreg = VIA_CRDR_SDBLKLEN_GPIDET | VIA_CRDR_SDBLKLEN_INTEN;
+	writel(lenreg, addrbase + VIA_CRDR_SDBLKLEN);
+
+	status = readw(addrbase + VIA_CRDR_SDSTATUS);
+	status &= VIA_CRDR_SDSTS_W1C_MASK;
+	writew(status, addrbase + VIA_CRDR_SDSTATUS);
+
+	status = readw(addrbase + VIA_CRDR_SDSTATUS2);
+	status |= VIA_CRDR_SDSTS_CFE;
+	writew(status, addrbase + VIA_CRDR_SDSTATUS2);
+
+	writel(pm_sdhcreg->sdcontrol_reg, addrbase + VIA_CRDR_SDCTRL);
+	writel(pm_sdhcreg->sdcmdarg_reg, addrbase + VIA_CRDR_SDCARG);
+	writel(pm_sdhcreg->sdintmask_reg, addrbase + VIA_CRDR_SDINTMASK);
+	writel(pm_sdhcreg->sdrsptmo_reg, addrbase + VIA_CRDR_SDRSPTMO);
+	writel(pm_sdhcreg->sdclksel_reg, addrbase + VIA_CRDR_SDCLKSEL);
+	writel(pm_sdhcreg->sdextctrl_reg, addrbase + VIA_CRDR_SDEXTCTRL);
+
+	via_print_pcictrl(host);
+	via_print_sdchc(host);
+}
+
+static int via_sd_suspend(struct pci_dev *pcidev, pm_message_t state)
+{
+	struct via_crdr_mmc_host *host;
+	int ret = 0;
+
+	host = pci_get_drvdata(pcidev);
+
+	via_save_pcictrlreg(host);
+	via_save_sdcreg(host);
+
+	ret = mmc_suspend_host(host->mmc, state);
+
+	pci_save_state(pcidev);
+	pci_enable_wake(pcidev, pci_choose_state(pcidev, state), 0);
+	pci_disable_device(pcidev);
+	pci_set_power_state(pcidev, pci_choose_state(pcidev, state));
+
+	return ret;
+}
+
+static int via_sd_resume(struct pci_dev *pcidev)
+{
+	struct via_crdr_mmc_host *sdhost;
+	int ret = 0;
+	u8 gatt;
+
+	sdhost = pci_get_drvdata(pcidev);
+
+	gatt = VIA_CRDR_PCICLKGATT_PAD_PWRON;
+	if (sdhost->power == MMC_VDD_165_195)
+		gatt &= ~VIA_CRDR_PCICLKGATT_3V3;
+	else
+		gatt |= VIA_CRDR_PCICLKGATT_3V3;
+	writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+	via_pwron_sleep(sdhost);
+	gatt |= VIA_CRDR_PCICLKGATT_SFTRST;
+	writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+	msleep(3);
+
+	msleep(100);
+
+	pci_set_power_state(pcidev, PCI_D0);
+	pci_restore_state(pcidev);
+	ret = pci_enable_device(pcidev);
+	if (ret)
+		return ret;
+
+	via_restore_pcictrlreg(sdhost);
+	via_init_sdc_pm(sdhost);
+
+	ret = mmc_resume_host(sdhost->mmc);
+
+	return ret;
+}
+
+#else /* CONFIG_PM */
+
+#define via_sd_suspend NULL
+#define via_sd_resume NULL
+
+#endif /* CONFIG_PM */
+
+static struct pci_driver via_sd_driver = {
+	.name = DRV_NAME,
+	.id_table = via_ids,
+	.probe = via_sd_probe,
+	.remove = __devexit_p(via_sd_remove),
+	.suspend = via_sd_suspend,
+	.resume = via_sd_resume,
+};
+
+static int __init via_sd_drv_init(void)
+{
+	pr_info(DRV_NAME ": VIA SD/MMC Card Reader driver "
+		"(C) 2008 VIA Technologies, Inc.\n");
+
+	return pci_register_driver(&via_sd_driver);
+}
+
+static void __exit via_sd_drv_exit(void)
+{
+	pci_unregister_driver(&via_sd_driver);
+}
+
+module_init(via_sd_drv_init);
+module_exit(via_sd_drv_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("VIA Technologies Inc.");
+MODULE_DESCRIPTION("VIA SD/MMC Card Interface driver");
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index c240454fd11..8664feebc93 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -46,6 +46,7 @@
 #define MANUFACTURER_INTEL	0x0089
 #define I82802AB	0x00ad
 #define I82802AC	0x00ac
+#define PF38F4476	0x881c
 #define MANUFACTURER_ST         0x0020
 #define M50LPW080       0x002F
 #define M50FLW080A	0x0080
@@ -315,10 +316,20 @@ static struct cfi_fixup fixup_table[] = {
 	{ 0, 0, NULL, NULL }
 };
 
+static void cfi_fixup_major_minor(struct cfi_private *cfi,
+						struct cfi_pri_intelext *extp)
+{
+	if (cfi->mfr == MANUFACTURER_INTEL &&
+			cfi->id == PF38F4476 && extp->MinorVersion == '3')
+		extp->MinorVersion = '1';
+}
+
 static inline struct cfi_pri_intelext *
 read_pri_intelext(struct map_info *map, __u16 adr)
 {
+	struct cfi_private *cfi = map->fldrv_priv;
 	struct cfi_pri_intelext *extp;
+	unsigned int extra_size = 0;
 	unsigned int extp_size = sizeof(*extp);
 
  again:
@@ -326,6 +337,8 @@ read_pri_intelext(struct map_info *map, __u16 adr)
 	if (!extp)
 		return NULL;
 
+	cfi_fixup_major_minor(cfi, extp);
+
 	if (extp->MajorVersion != '1' ||
 	    (extp->MinorVersion < '0' || extp->MinorVersion > '5')) {
 		printk(KERN_ERR "  Unknown Intel/Sharp Extended Query "
@@ -340,19 +353,24 @@ read_pri_intelext(struct map_info *map, __u16 adr)
 	extp->BlkStatusRegMask = le16_to_cpu(extp->BlkStatusRegMask);
 	extp->ProtRegAddr = le16_to_cpu(extp->ProtRegAddr);
 
-	if (extp->MajorVersion == '1' && extp->MinorVersion >= '3') {
-		unsigned int extra_size = 0;
-		int nb_parts, i;
+	if (extp->MinorVersion >= '0') {
+		extra_size = 0;
 
 		/* Protection Register info */
 		extra_size += (extp->NumProtectionFields - 1) *
 			      sizeof(struct cfi_intelext_otpinfo);
+	}
 
+	if (extp->MinorVersion >= '1') {
 		/* Burst Read info */
 		extra_size += 2;
 		if (extp_size < sizeof(*extp) + extra_size)
 			goto need_more;
-		extra_size += extp->extra[extra_size-1];
+		extra_size += extp->extra[extra_size - 1];
+	}
+
+	if (extp->MinorVersion >= '3') {
+		int nb_parts, i;
 
 		/* Number of hardware-partitions */
 		extra_size += 1;
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index e824b9b9b05..ccc4cfc7e4b 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -166,6 +166,7 @@
 #define SST39LF040	0x00D7
 #define SST39SF010A	0x00B5
 #define SST39SF020A	0x00B6
+#define SST39SF040	0x00B7
 #define SST49LF004B	0x0060
 #define SST49LF040B	0x0050
 #define SST49LF008A	0x005a
@@ -1393,6 +1394,18 @@ static const struct amd_flash_info jedec_table[] = {
 		}
 	}, {
 		.mfr_id		= MANUFACTURER_SST,
+		.dev_id		= SST39SF040,
+		.name		= "SST 39SF040",
+		.devtypes	= CFI_DEVICETYPE_X8,
+		.uaddr		= MTD_UADDR_0x5555_0x2AAA,
+		.dev_size	= SIZE_512KiB,
+		.cmd_set	= P_ID_AMD_STD,
+		.nr_regions	= 1,
+		.regions	= {
+			ERASEINFO(0x01000,128),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_SST,
 		.dev_id		= SST49LF040B,
 		.name		= "SST 49LF040B",
 		.devtypes	= CFI_DEVICETYPE_X8,
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index cc6369ea67d..59c46126a5c 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -500,6 +500,9 @@ static struct flash_info __devinitdata m25p_data [] = {
 	{ "at26df161a", 0x1f4601, 0, 64 * 1024, 32, SECT_4K, },
 	{ "at26df321",  0x1f4701, 0, 64 * 1024, 64, SECT_4K, },
 
+	/* Macronix */
+	{ "mx25l12805d", 0xc22018, 0, 64 * 1024, 256, },
+
 	/* Spansion -- single (large) sector size only, at least
 	 * for the chips listed here (without boot sectors).
 	 */
@@ -528,6 +531,7 @@ static struct flash_info __devinitdata m25p_data [] = {
 	{ "m25p64",  0x202017,  0, 64 * 1024, 128, },
 	{ "m25p128", 0x202018, 0, 256 * 1024, 64, },
 
+	{ "m45pe10", 0x204011,  0, 64 * 1024, 2, },
 	{ "m45pe80", 0x204014,  0, 64 * 1024, 16, },
 	{ "m45pe16", 0x204015,  0, 64 * 1024, 32, },
 
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 82923bd2d9c..0b98654d8ee 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -105,15 +105,6 @@ config MSP_FLASH_MAP_LIMIT
 	default "0x02000000"
 	depends on MSP_FLASH_MAP_LIMIT_32M
 
-config MTD_PMC_MSP_RAMROOT
-	tristate "Embedded RAM block device for root on PMC-Sierra MSP"
-	depends on PMC_MSP_EMBEDDED_ROOTFS && \
-			(MTD_BLOCK || MTD_BLOCK_RO) && \
-			MTD_RAM
-	help
-	  This provides support for the embedded root file system
-          on PMC MSP devices.  This memory is mapped as a MTD block device.
-
 config MTD_SUN_UFLASH
 	tristate "Sun Microsystems userflash support"
 	depends on SPARC && MTD_CFI && PCI
@@ -270,7 +261,7 @@ config MTD_ALCHEMY
 
 config MTD_DILNETPC
 	tristate "CFI Flash device mapped on DIL/Net PC"
-	depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT
+	depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
 	help
 	  MTD map driver for SSV DIL/Net PC Boards "DNP" and "ADNP".
 	  For details, see <http://www.ssv-embedded.de/ssv/pc104/p169.htm>
@@ -501,7 +492,7 @@ config MTD_BFIN_ASYNC
 	  If compiled as a module, it will be called bfin-async-flash.
 
 config MTD_UCLINUX
-	tristate "Generic uClinux RAM/ROM filesystem support"
+	bool "Generic uClinux RAM/ROM filesystem support"
 	depends on MTD_PARTITIONS && MTD_RAM && !MMU
 	help
 	  Map driver to support image based filesystems for uClinux.
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 2dbc1bec848..8bae7f9850c 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -25,7 +25,6 @@ obj-$(CONFIG_MTD_OCTAGON)	+= octagon-5066.o
 obj-$(CONFIG_MTD_PHYSMAP)	+= physmap.o
 obj-$(CONFIG_MTD_PHYSMAP_OF)	+= physmap_of.o
 obj-$(CONFIG_MTD_PMC_MSP_EVM)   += pmcmsp-flash.o
-obj-$(CONFIG_MTD_PMC_MSP_RAMROOT)+= pmcmsp-ramroot.o
 obj-$(CONFIG_MTD_PCMCIA)	+= pcmciamtd.o
 obj-$(CONFIG_MTD_RPXLITE)	+= rpxlite.o
 obj-$(CONFIG_MTD_TQM8XXL)	+= tqm8xxl.o
diff --git a/drivers/mtd/maps/bfin-async-flash.c b/drivers/mtd/maps/bfin-async-flash.c
index 576611f605d..365c77b1b87 100644
--- a/drivers/mtd/maps/bfin-async-flash.c
+++ b/drivers/mtd/maps/bfin-async-flash.c
@@ -40,6 +40,9 @@ struct async_state {
 	uint32_t flash_ambctl0, flash_ambctl1;
 	uint32_t save_ambctl0, save_ambctl1;
 	unsigned long irq_flags;
+#ifdef CONFIG_MTD_PARTITIONS
+	struct mtd_partition *parts;
+#endif
 };
 
 static void switch_to_flash(struct async_state *state)
@@ -170,6 +173,7 @@ static int __devinit bfin_flash_probe(struct platform_device *pdev)
 	if (ret > 0) {
 		pr_devinit(KERN_NOTICE DRIVER_NAME ": Using commandline partition definition\n");
 		add_mtd_partitions(state->mtd, pdata->parts, ret);
+		state->parts = pdata->parts;
 
 	} else if (pdata->nr_parts) {
 		pr_devinit(KERN_NOTICE DRIVER_NAME ": Using board partition definition\n");
@@ -193,6 +197,7 @@ static int __devexit bfin_flash_remove(struct platform_device *pdev)
 	gpio_free(state->enet_flash_pin);
 #ifdef CONFIG_MTD_PARTITIONS
 	del_mtd_partitions(state->mtd);
+	kfree(state->parts);
 #endif
 	map_destroy(state->mtd);
 	kfree(state);
diff --git a/drivers/mtd/maps/integrator-flash.c b/drivers/mtd/maps/integrator-flash.c
index c9681a339a5..b08a798ee25 100644
--- a/drivers/mtd/maps/integrator-flash.c
+++ b/drivers/mtd/maps/integrator-flash.c
@@ -36,27 +36,33 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/concat.h>
 
 #include <asm/mach/flash.h>
 #include <mach/hardware.h>
 #include <asm/system.h>
 
-#ifdef CONFIG_ARCH_P720T
-#define FLASH_BASE		(0x04000000)
-#define FLASH_SIZE		(64*1024*1024)
-#endif
+#define SUBDEV_NAME_SIZE	(BUS_ID_SIZE + 2)
 
-struct armflash_info {
+struct armflash_subdev_info {
+	char			name[SUBDEV_NAME_SIZE];
+	struct mtd_info		*mtd;
+	struct map_info		map;
 	struct flash_platform_data *plat;
+};
+
+struct armflash_info {
 	struct resource		*res;
 	struct mtd_partition	*parts;
 	struct mtd_info		*mtd;
-	struct map_info		map;
+	int			nr_subdev;
+	struct armflash_subdev_info subdev[0];
 };
 
 static void armflash_set_vpp(struct map_info *map, int on)
 {
-	struct armflash_info *info = container_of(map, struct armflash_info, map);
+	struct armflash_subdev_info *info =
+		container_of(map, struct armflash_subdev_info, map);
 
 	if (info->plat && info->plat->set_vpp)
 		info->plat->set_vpp(on);
@@ -64,32 +70,17 @@ static void armflash_set_vpp(struct map_info *map, int on)
 
 static const char *probes[] = { "cmdlinepart", "RedBoot", "afs", NULL };
 
-static int armflash_probe(struct platform_device *dev)
+static int armflash_subdev_probe(struct armflash_subdev_info *subdev,
+				 struct resource *res)
 {
-	struct flash_platform_data *plat = dev->dev.platform_data;
-	struct resource *res = dev->resource;
-	unsigned int size = res->end - res->start + 1;
-	struct armflash_info *info;
-	int err;
+	struct flash_platform_data *plat = subdev->plat;
+	resource_size_t size = res->end - res->start + 1;
 	void __iomem *base;
+	int err = 0;
 
-	info = kzalloc(sizeof(struct armflash_info), GFP_KERNEL);
-	if (!info) {
-		err = -ENOMEM;
-		goto out;
-	}
-
-	info->plat = plat;
-	if (plat && plat->init) {
-		err = plat->init();
-		if (err)
-			goto no_resource;
-	}
-
-	info->res = request_mem_region(res->start, size, "armflash");
-	if (!info->res) {
+	if (!request_mem_region(res->start, size, subdev->name)) {
 		err = -EBUSY;
-		goto no_resource;
+		goto out;
 	}
 
 	base = ioremap(res->start, size);
@@ -101,27 +92,132 @@ static int armflash_probe(struct platform_device *dev)
 	/*
 	 * look for CFI based flash parts fitted to this board
 	 */
-	info->map.size		= size;
-	info->map.bankwidth	= plat->width;
-	info->map.phys		= res->start;
-	info->map.virt		= base;
-	info->map.name		= dev_name(&dev->dev);
-	info->map.set_vpp	= armflash_set_vpp;
+	subdev->map.size	= size;
+	subdev->map.bankwidth	= plat->width;
+	subdev->map.phys	= res->start;
+	subdev->map.virt	= base;
+	subdev->map.name	= subdev->name;
+	subdev->map.set_vpp	= armflash_set_vpp;
 
-	simple_map_init(&info->map);
+	simple_map_init(&subdev->map);
 
 	/*
 	 * Also, the CFI layer automatically works out what size
 	 * of chips we have, and does the necessary identification
 	 * for us automatically.
 	 */
-	info->mtd = do_map_probe(plat->map_name, &info->map);
-	if (!info->mtd) {
+	subdev->mtd = do_map_probe(plat->map_name, &subdev->map);
+	if (!subdev->mtd) {
 		err = -ENXIO;
 		goto no_device;
 	}
 
-	info->mtd->owner = THIS_MODULE;
+	subdev->mtd->owner = THIS_MODULE;
+
+	/* Successful? */
+	if (err == 0)
+		return err;
+
+	if (subdev->mtd)
+		map_destroy(subdev->mtd);
+ no_device:
+	iounmap(base);
+ no_mem:
+	release_mem_region(res->start, size);
+ out:
+	return err;
+}
+
+static void armflash_subdev_remove(struct armflash_subdev_info *subdev)
+{
+	if (subdev->mtd)
+		map_destroy(subdev->mtd);
+	if (subdev->map.virt)
+		iounmap(subdev->map.virt);
+	release_mem_region(subdev->map.phys, subdev->map.size);
+}
+
+static int armflash_probe(struct platform_device *dev)
+{
+	struct flash_platform_data *plat = dev->dev.platform_data;
+	unsigned int size;
+	struct armflash_info *info;
+	int i, nr, err;
+
+	/* Count the number of devices */
+	for (nr = 0; ; nr++)
+		if (!platform_get_resource(dev, IORESOURCE_MEM, nr))
+			break;
+	if (nr == 0) {
+		err = -ENODEV;
+		goto out;
+	}
+
+	size = sizeof(struct armflash_info) +
+		sizeof(struct armflash_subdev_info) * nr;
+	info = kzalloc(size, GFP_KERNEL);
+	if (!info) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	if (plat && plat->init) {
+		err = plat->init();
+		if (err)
+			goto no_resource;
+	}
+
+	for (i = 0; i < nr; i++) {
+		struct armflash_subdev_info *subdev = &info->subdev[i];
+		struct resource *res;
+
+		res = platform_get_resource(dev, IORESOURCE_MEM, i);
+		if (!res)
+			break;
+
+		if (nr == 1)
+			/* No MTD concatenation, just use the default name */
+			snprintf(subdev->name, SUBDEV_NAME_SIZE, "%s",
+				 dev_name(&dev->dev));
+		else
+			snprintf(subdev->name, SUBDEV_NAME_SIZE, "%s-%d",
+				 dev_name(&dev->dev), i);
+		subdev->plat = plat;
+
+		err = armflash_subdev_probe(subdev, res);
+		if (err)
+			break;
+	}
+	info->nr_subdev = i;
+
+	if (err)
+		goto subdev_err;
+
+	if (info->nr_subdev == 1)
+		info->mtd = info->subdev[0].mtd;
+	else if (info->nr_subdev > 1) {
+#ifdef CONFIG_MTD_CONCAT
+		struct mtd_info *cdev[info->nr_subdev];
+
+		/*
+		 * We detected multiple devices.  Concatenate them together.
+		 */
+		for (i = 0; i < info->nr_subdev; i++)
+			cdev[i] = info->subdev[i].mtd;
+
+		info->mtd = mtd_concat_create(cdev, info->nr_subdev,
+					      dev_name(&dev->dev));
+		if (info->mtd == NULL)
+			err = -ENXIO;
+#else
+		printk(KERN_ERR "armflash: multiple devices found but "
+		       "MTD concat support disabled.\n");
+		err = -ENXIO;
+#endif
+	}
+
+	if (err < 0)
+		goto cleanup;
 
 	err = parse_mtd_partitions(info->mtd, probes, &info->parts, 0);
 	if (err > 0) {
@@ -131,28 +227,30 @@ static int armflash_probe(struct platform_device *dev)
 			       "mtd partition registration failed: %d\n", err);
 	}
 
-	if (err == 0)
+	if (err == 0) {
 		platform_set_drvdata(dev, info);
+		return err;
+	}
 
 	/*
-	 * If we got an error, free all resources.
+	 * We got an error, free all resources.
 	 */
-	if (err < 0) {
-		if (info->mtd) {
-			del_mtd_partitions(info->mtd);
-			map_destroy(info->mtd);
-		}
-		kfree(info->parts);
-
- no_device:
-		iounmap(base);
- no_mem:
-		release_mem_region(res->start, size);
- no_resource:
-		if (plat && plat->exit)
-			plat->exit();
-		kfree(info);
+ cleanup:
+	if (info->mtd) {
+		del_mtd_partitions(info->mtd);
+#ifdef CONFIG_MTD_CONCAT
+		if (info->mtd != info->subdev[0].mtd)
+			mtd_concat_destroy(info->mtd);
+#endif
 	}
+	kfree(info->parts);
+ subdev_err:
+	for (i = info->nr_subdev - 1; i >= 0; i--)
+		armflash_subdev_remove(&info->subdev[i]);
+ no_resource:
+	if (plat && plat->exit)
+		plat->exit();
+	kfree(info);
  out:
 	return err;
 }
@@ -160,22 +258,26 @@ static int armflash_probe(struct platform_device *dev)
 static int armflash_remove(struct platform_device *dev)
 {
 	struct armflash_info *info = platform_get_drvdata(dev);
+	struct flash_platform_data *plat = dev->dev.platform_data;
+	int i;
 
 	platform_set_drvdata(dev, NULL);
 
 	if (info) {
 		if (info->mtd) {
 			del_mtd_partitions(info->mtd);
-			map_destroy(info->mtd);
+#ifdef CONFIG_MTD_CONCAT
+			if (info->mtd != info->subdev[0].mtd)
+				mtd_concat_destroy(info->mtd);
+#endif
 		}
 		kfree(info->parts);
 
-		iounmap(info->map.virt);
-		release_resource(info->res);
-		kfree(info->res);
+		for (i = info->nr_subdev - 1; i >= 0; i--)
+			armflash_subdev_remove(&info->subdev[i]);
 
-		if (info->plat && info->plat->exit)
-			info->plat->exit();
+		if (plat && plat->exit)
+			plat->exit();
 
 		kfree(info);
 	}
diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index 29a90115735..380648e9051 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -195,42 +195,6 @@ err_out:
 }
 
 #ifdef CONFIG_PM
-static int physmap_flash_suspend(struct platform_device *dev, pm_message_t state)
-{
-	struct physmap_flash_info *info = platform_get_drvdata(dev);
-	int ret = 0;
-	int i;
-
-	for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++)
-		if (info->mtd[i]->suspend) {
-			ret = info->mtd[i]->suspend(info->mtd[i]);
-			if (ret)
-				goto fail;
-		}
-
-	return 0;
-fail:
-	for (--i; i >= 0; --i)
-		if (info->mtd[i]->suspend) {
-			BUG_ON(!info->mtd[i]->resume);
-			info->mtd[i]->resume(info->mtd[i]);
-		}
-
-	return ret;
-}
-
-static int physmap_flash_resume(struct platform_device *dev)
-{
-	struct physmap_flash_info *info = platform_get_drvdata(dev);
-	int i;
-
-	for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++)
-		if (info->mtd[i]->resume)
-			info->mtd[i]->resume(info->mtd[i]);
-
-	return 0;
-}
-
 static void physmap_flash_shutdown(struct platform_device *dev)
 {
 	struct physmap_flash_info *info = platform_get_drvdata(dev);
@@ -242,16 +206,12 @@ static void physmap_flash_shutdown(struct platform_device *dev)
 				info->mtd[i]->resume(info->mtd[i]);
 }
 #else
-#define physmap_flash_suspend NULL
-#define physmap_flash_resume NULL
 #define physmap_flash_shutdown NULL
 #endif
 
 static struct platform_driver physmap_flash_driver = {
 	.probe		= physmap_flash_probe,
 	.remove		= physmap_flash_remove,
-	.suspend	= physmap_flash_suspend,
-	.resume		= physmap_flash_resume,
 	.shutdown	= physmap_flash_shutdown,
 	.driver		= {
 		.name	= "physmap-flash",
diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c
index c83a60fada5..39d357b2eb4 100644
--- a/drivers/mtd/maps/physmap_of.c
+++ b/drivers/mtd/maps/physmap_of.c
@@ -20,16 +20,23 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/concat.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
 
+struct of_flash_list {
+	struct mtd_info *mtd;
+	struct map_info map;
+	struct resource *res;
+};
+
 struct of_flash {
-	struct mtd_info		*mtd;
-	struct map_info		map;
-	struct resource		*res;
+	struct mtd_info		*cmtd;
 #ifdef CONFIG_MTD_PARTITIONS
 	struct mtd_partition	*parts;
 #endif
+	int list_size; /* number of elements in of_flash_list */
+	struct of_flash_list	list[0];
 };
 
 #ifdef CONFIG_MTD_PARTITIONS
@@ -88,30 +95,44 @@ static int parse_obsolete_partitions(struct of_device *dev,
 static int of_flash_remove(struct of_device *dev)
 {
 	struct of_flash *info;
+	int i;
 
 	info = dev_get_drvdata(&dev->dev);
 	if (!info)
 		return 0;
 	dev_set_drvdata(&dev->dev, NULL);
 
-	if (info->mtd) {
+#ifdef CONFIG_MTD_CONCAT
+	if (info->cmtd != info->list[0].mtd) {
+		del_mtd_device(info->cmtd);
+		mtd_concat_destroy(info->cmtd);
+	}
+#endif
+
+	if (info->cmtd) {
 		if (OF_FLASH_PARTS(info)) {
-			del_mtd_partitions(info->mtd);
+			del_mtd_partitions(info->cmtd);
 			kfree(OF_FLASH_PARTS(info));
 		} else {
-			del_mtd_device(info->mtd);
+			del_mtd_device(info->cmtd);
 		}
-		map_destroy(info->mtd);
 	}
 
-	if (info->map.virt)
-		iounmap(info->map.virt);
+	for (i = 0; i < info->list_size; i++) {
+		if (info->list[i].mtd)
+			map_destroy(info->list[i].mtd);
 
-	if (info->res) {
-		release_resource(info->res);
-		kfree(info->res);
+		if (info->list[i].map.virt)
+			iounmap(info->list[i].map.virt);
+
+		if (info->list[i].res) {
+			release_resource(info->list[i].res);
+			kfree(info->list[i].res);
+		}
 	}
 
+	kfree(info);
+
 	return 0;
 }
 
@@ -164,68 +185,130 @@ static int __devinit of_flash_probe(struct of_device *dev,
 	const char *probe_type = match->data;
 	const u32 *width;
 	int err;
-
-	err = -ENXIO;
-	if (of_address_to_resource(dp, 0, &res)) {
-		dev_err(&dev->dev, "Can't get IO address from device tree\n");
+	int i;
+	int count;
+	const u32 *p;
+	int reg_tuple_size;
+	struct mtd_info **mtd_list = NULL;
+
+	reg_tuple_size = (of_n_addr_cells(dp) + of_n_size_cells(dp)) * sizeof(u32);
+
+	/*
+	 * Get number of "reg" tuples. Scan for MTD devices on area's
+	 * described by each "reg" region. This makes it possible (including
+	 * the concat support) to support the Intel P30 48F4400 chips which
+	 * consists internally of 2 non-identical NOR chips on one die.
+	 */
+	p = of_get_property(dp, "reg", &count);
+	if (count % reg_tuple_size != 0) {
+		dev_err(&dev->dev, "Malformed reg property on %s\n",
+				dev->node->full_name);
+		err = -EINVAL;
 		goto err_out;
 	}
-
-       	dev_dbg(&dev->dev, "of_flash device: %.8llx-%.8llx\n",
-		(unsigned long long)res.start, (unsigned long long)res.end);
+	count /= reg_tuple_size;
 
 	err = -ENOMEM;
-	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	info = kzalloc(sizeof(struct of_flash) +
+		       sizeof(struct of_flash_list) * count, GFP_KERNEL);
+	if (!info)
+		goto err_out;
+
+	mtd_list = kzalloc(sizeof(struct mtd_info) * count, GFP_KERNEL);
 	if (!info)
 		goto err_out;
 
 	dev_set_drvdata(&dev->dev, info);
 
-	err = -EBUSY;
-	info->res = request_mem_region(res.start, res.end - res.start + 1,
-				       dev_name(&dev->dev));
-	if (!info->res)
-		goto err_out;
+	for (i = 0; i < count; i++) {
+		err = -ENXIO;
+		if (of_address_to_resource(dp, i, &res)) {
+			dev_err(&dev->dev, "Can't get IO address from device"
+				" tree\n");
+			goto err_out;
+		}
 
-	err = -ENXIO;
-	width = of_get_property(dp, "bank-width", NULL);
-	if (!width) {
-		dev_err(&dev->dev, "Can't get bank width from device tree\n");
-		goto err_out;
-	}
+		dev_dbg(&dev->dev, "of_flash device: %.8llx-%.8llx\n",
+			(unsigned long long)res.start,
+			(unsigned long long)res.end);
+
+		err = -EBUSY;
+		info->list[i].res = request_mem_region(res.start, res.end -
+						       res.start + 1,
+						       dev_name(&dev->dev));
+		if (!info->list[i].res)
+			goto err_out;
+
+		err = -ENXIO;
+		width = of_get_property(dp, "bank-width", NULL);
+		if (!width) {
+			dev_err(&dev->dev, "Can't get bank width from device"
+				" tree\n");
+			goto err_out;
+		}
 
-	info->map.name = dev_name(&dev->dev);
-	info->map.phys = res.start;
-	info->map.size = res.end - res.start + 1;
-	info->map.bankwidth = *width;
+		info->list[i].map.name = dev_name(&dev->dev);
+		info->list[i].map.phys = res.start;
+		info->list[i].map.size = res.end - res.start + 1;
+		info->list[i].map.bankwidth = *width;
+
+		err = -ENOMEM;
+		info->list[i].map.virt = ioremap(info->list[i].map.phys,
+						 info->list[i].map.size);
+		if (!info->list[i].map.virt) {
+			dev_err(&dev->dev, "Failed to ioremap() flash"
+				" region\n");
+			goto err_out;
+		}
 
-	err = -ENOMEM;
-	info->map.virt = ioremap(info->map.phys, info->map.size);
-	if (!info->map.virt) {
-		dev_err(&dev->dev, "Failed to ioremap() flash region\n");
-		goto err_out;
-	}
+		simple_map_init(&info->list[i].map);
 
-	simple_map_init(&info->map);
+		if (probe_type) {
+			info->list[i].mtd = do_map_probe(probe_type,
+							 &info->list[i].map);
+		} else {
+			info->list[i].mtd = obsolete_probe(dev,
+							   &info->list[i].map);
+		}
+		mtd_list[i] = info->list[i].mtd;
 
-	if (probe_type)
-		info->mtd = do_map_probe(probe_type, &info->map);
-	else
-		info->mtd = obsolete_probe(dev, &info->map);
+		err = -ENXIO;
+		if (!info->list[i].mtd) {
+			dev_err(&dev->dev, "do_map_probe() failed\n");
+			goto err_out;
+		} else {
+			info->list_size++;
+		}
+		info->list[i].mtd->owner = THIS_MODULE;
+		info->list[i].mtd->dev.parent = &dev->dev;
+	}
 
-	err = -ENXIO;
-	if (!info->mtd) {
-		dev_err(&dev->dev, "do_map_probe() failed\n");
-		goto err_out;
+	err = 0;
+	if (info->list_size == 1) {
+		info->cmtd = info->list[0].mtd;
+	} else if (info->list_size > 1) {
+		/*
+		 * We detected multiple devices. Concatenate them together.
+		 */
+#ifdef CONFIG_MTD_CONCAT
+		info->cmtd = mtd_concat_create(mtd_list, info->list_size,
+					       dev_name(&dev->dev));
+		if (info->cmtd == NULL)
+			err = -ENXIO;
+#else
+		printk(KERN_ERR "physmap_of: multiple devices "
+		       "found but MTD concat support disabled.\n");
+		err = -ENXIO;
+#endif
 	}
-	info->mtd->owner = THIS_MODULE;
-	info->mtd->dev.parent = &dev->dev;
+	if (err)
+		goto err_out;
 
 #ifdef CONFIG_MTD_PARTITIONS
 	/* First look for RedBoot table or partitions on the command
 	 * line, these take precedence over device tree information */
-	err = parse_mtd_partitions(info->mtd, part_probe_types,
-	                           &info->parts, 0);
+	err = parse_mtd_partitions(info->cmtd, part_probe_types,
+				   &info->parts, 0);
 	if (err < 0)
 		return err;
 
@@ -244,15 +327,19 @@ static int __devinit of_flash_probe(struct of_device *dev,
 	}
 
 	if (err > 0)
-		add_mtd_partitions(info->mtd, info->parts, err);
+		add_mtd_partitions(info->cmtd, info->parts, err);
 	else
 #endif
-		add_mtd_device(info->mtd);
+		add_mtd_device(info->cmtd);
+
+	kfree(mtd_list);
 
 	return 0;
 
 err_out:
+	kfree(mtd_list);
 	of_flash_remove(dev);
+
 	return err;
 }
 
diff --git a/drivers/mtd/maps/pmcmsp-ramroot.c b/drivers/mtd/maps/pmcmsp-ramroot.c
deleted file mode 100644
index 30de5c0c09a..00000000000
--- a/drivers/mtd/maps/pmcmsp-ramroot.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * Mapping of the rootfs in a physical region of memory
- *
- * Copyright (C) 2005-2007 PMC-Sierra Inc.
- * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/fs.h>
-#include <linux/root_dev.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-
-#include <asm/io.h>
-
-#include <msp_prom.h>
-
-static struct mtd_info *rr_mtd;
-
-struct map_info rr_map = {
-	.name = "ramroot",
-	.bankwidth = 4,
-};
-
-static int __init init_rrmap(void)
-{
-	void *ramroot_start;
-	unsigned long ramroot_size;
-
-	/* Check for supported rootfs types */
-	if (get_ramroot(&ramroot_start, &ramroot_size)) {
-		rr_map.phys = CPHYSADDR(ramroot_start);
-		rr_map.size = ramroot_size;
-
-		printk(KERN_NOTICE
-			"PMC embedded root device: 0x%08lx @ 0x%08lx\n",
-			rr_map.size, (unsigned long)rr_map.phys);
-	} else {
-		printk(KERN_ERR
-			"init_rrmap: no supported embedded rootfs detected!\n");
-		return -ENXIO;
-	}
-
-	/* Map rootfs to I/O space for block device driver */
-	rr_map.virt = ioremap(rr_map.phys, rr_map.size);
-	if (!rr_map.virt) {
-		printk(KERN_ERR "Failed to ioremap\n");
-		return -EIO;
-	}
-
-	simple_map_init(&rr_map);
-
-	rr_mtd = do_map_probe("map_ram", &rr_map);
-	if (rr_mtd) {
-		rr_mtd->owner = THIS_MODULE;
-
-		add_mtd_device(rr_mtd);
-
-		return 0;
-	}
-
-	iounmap(rr_map.virt);
-	return -ENXIO;
-}
-
-static void __exit cleanup_rrmap(void)
-{
-	del_mtd_device(rr_mtd);
-	map_destroy(rr_mtd);
-
-	iounmap(rr_map.virt);
-	rr_map.virt = NULL;
-}
-
-MODULE_AUTHOR("PMC-Sierra, Inc");
-MODULE_DESCRIPTION("MTD map driver for embedded PMC-Sierra MSP filesystem");
-MODULE_LICENSE("GPL");
-
-module_init(init_rrmap);
-module_exit(cleanup_rrmap);
diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c
index 572d32fdf38..643aa06b599 100644
--- a/drivers/mtd/maps/pxa2xx-flash.c
+++ b/drivers/mtd/maps/pxa2xx-flash.c
@@ -140,24 +140,6 @@ static int __devexit pxa2xx_flash_remove(struct platform_device *dev)
 }
 
 #ifdef CONFIG_PM
-static int pxa2xx_flash_suspend(struct platform_device *dev, pm_message_t state)
-{
-	struct pxa2xx_flash_info *info = platform_get_drvdata(dev);
-	int ret = 0;
-
-	if (info->mtd && info->mtd->suspend)
-		ret = info->mtd->suspend(info->mtd);
-	return ret;
-}
-
-static int pxa2xx_flash_resume(struct platform_device *dev)
-{
-	struct pxa2xx_flash_info *info = platform_get_drvdata(dev);
-
-	if (info->mtd && info->mtd->resume)
-		info->mtd->resume(info->mtd);
-	return 0;
-}
 static void pxa2xx_flash_shutdown(struct platform_device *dev)
 {
 	struct pxa2xx_flash_info *info = platform_get_drvdata(dev);
@@ -166,8 +148,6 @@ static void pxa2xx_flash_shutdown(struct platform_device *dev)
 		info->mtd->resume(info->mtd);
 }
 #else
-#define pxa2xx_flash_suspend NULL
-#define pxa2xx_flash_resume NULL
 #define pxa2xx_flash_shutdown NULL
 #endif
 
@@ -178,8 +158,6 @@ static struct platform_driver pxa2xx_flash_driver = {
 	},
 	.probe		= pxa2xx_flash_probe,
 	.remove		= __devexit_p(pxa2xx_flash_remove),
-	.suspend	= pxa2xx_flash_suspend,
-	.resume		= pxa2xx_flash_resume,
 	.shutdown	= pxa2xx_flash_shutdown,
 };
 
diff --git a/drivers/mtd/maps/rbtx4939-flash.c b/drivers/mtd/maps/rbtx4939-flash.c
index d39f0adac84..83ed64512c5 100644
--- a/drivers/mtd/maps/rbtx4939-flash.c
+++ b/drivers/mtd/maps/rbtx4939-flash.c
@@ -145,25 +145,6 @@ err_out:
 }
 
 #ifdef CONFIG_PM
-static int rbtx4939_flash_suspend(struct platform_device *dev,
-				  pm_message_t state)
-{
-	struct rbtx4939_flash_info *info = platform_get_drvdata(dev);
-
-	if (info->mtd->suspend)
-		return info->mtd->suspend(info->mtd);
-	return 0;
-}
-
-static int rbtx4939_flash_resume(struct platform_device *dev)
-{
-	struct rbtx4939_flash_info *info = platform_get_drvdata(dev);
-
-	if (info->mtd->resume)
-		info->mtd->resume(info->mtd);
-	return 0;
-}
-
 static void rbtx4939_flash_shutdown(struct platform_device *dev)
 {
 	struct rbtx4939_flash_info *info = platform_get_drvdata(dev);
@@ -173,16 +154,12 @@ static void rbtx4939_flash_shutdown(struct platform_device *dev)
 			info->mtd->resume(info->mtd);
 }
 #else
-#define rbtx4939_flash_suspend NULL
-#define rbtx4939_flash_resume NULL
 #define rbtx4939_flash_shutdown NULL
 #endif
 
 static struct platform_driver rbtx4939_flash_driver = {
 	.probe		= rbtx4939_flash_probe,
 	.remove		= rbtx4939_flash_remove,
-	.suspend	= rbtx4939_flash_suspend,
-	.resume		= rbtx4939_flash_resume,
 	.shutdown	= rbtx4939_flash_shutdown,
 	.driver		= {
 		.name	= "rbtx4939-flash",
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
index 05e9362dc7f..c6210f5118d 100644
--- a/drivers/mtd/maps/sa1100-flash.c
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -415,25 +415,6 @@ static int __exit sa1100_mtd_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM
-static int sa1100_mtd_suspend(struct platform_device *dev, pm_message_t state)
-{
-	struct sa_info *info = platform_get_drvdata(dev);
-	int ret = 0;
-
-	if (info)
-		ret = info->mtd->suspend(info->mtd);
-
-	return ret;
-}
-
-static int sa1100_mtd_resume(struct platform_device *dev)
-{
-	struct sa_info *info = platform_get_drvdata(dev);
-	if (info)
-		info->mtd->resume(info->mtd);
-	return 0;
-}
-
 static void sa1100_mtd_shutdown(struct platform_device *dev)
 {
 	struct sa_info *info = platform_get_drvdata(dev);
@@ -441,16 +422,12 @@ static void sa1100_mtd_shutdown(struct platform_device *dev)
 		info->mtd->resume(info->mtd);
 }
 #else
-#define sa1100_mtd_suspend NULL
-#define sa1100_mtd_resume  NULL
 #define sa1100_mtd_shutdown NULL
 #endif
 
 static struct platform_driver sa1100_mtd_driver = {
 	.probe		= sa1100_mtd_probe,
 	.remove		= __exit_p(sa1100_mtd_remove),
-	.suspend	= sa1100_mtd_suspend,
-	.resume		= sa1100_mtd_resume,
 	.shutdown	= sa1100_mtd_shutdown,
 	.driver		= {
 		.name	= "sa1100-mtd",
diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c
index 81756e39771..d4314fb8821 100644
--- a/drivers/mtd/maps/uclinux.c
+++ b/drivers/mtd/maps/uclinux.c
@@ -22,15 +22,19 @@
 
 /****************************************************************************/
 
+extern char _ebss;
+
 struct map_info uclinux_ram_map = {
 	.name = "RAM",
+	.phys = (unsigned long)&_ebss,
+	.size = 0,
 };
 
-struct mtd_info *uclinux_ram_mtdinfo;
+static struct mtd_info *uclinux_ram_mtdinfo;
 
 /****************************************************************************/
 
-struct mtd_partition uclinux_romfs[] = {
+static struct mtd_partition uclinux_romfs[] = {
 	{ .name = "ROMfs" }
 };
 
@@ -38,7 +42,7 @@ struct mtd_partition uclinux_romfs[] = {
 
 /****************************************************************************/
 
-int uclinux_point(struct mtd_info *mtd, loff_t from, size_t len,
+static int uclinux_point(struct mtd_info *mtd, loff_t from, size_t len,
 	size_t *retlen, void **virt, resource_size_t *phys)
 {
 	struct map_info *map = mtd->priv;
@@ -55,12 +59,10 @@ static int __init uclinux_mtd_init(void)
 {
 	struct mtd_info *mtd;
 	struct map_info *mapp;
-	extern char _ebss;
-	unsigned long addr = (unsigned long) &_ebss;
 
 	mapp = &uclinux_ram_map;
-	mapp->phys = addr;
-	mapp->size = PAGE_ALIGN(ntohl(*((unsigned long *)(addr + 8))));
+	if (!mapp->size)
+		mapp->size = PAGE_ALIGN(ntohl(*((unsigned long *)(mapp->phys + 8))));
 	mapp->bankwidth = 4;
 
 	printk("uclinux[mtd]: RAM probe address=0x%x size=0x%x\n",
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index aaac3b6800b..c3f62654b6d 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -291,7 +291,7 @@ int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new)
 	gd->private_data = new;
 	new->blkcore_priv = gd;
 	gd->queue = tr->blkcore_priv->rq;
-	gd->driverfs_dev = new->mtd->dev.parent;
+	gd->driverfs_dev = &new->mtd->dev;
 
 	if (new->readonly)
 		set_disk_ro(gd, 1);
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 763d3f0a1f4..5b081cb8435 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -14,6 +14,7 @@
 #include <linux/sched.h>
 #include <linux/smp_lock.h>
 #include <linux/backing-dev.h>
+#include <linux/compat.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/compatmac.h>
@@ -355,6 +356,100 @@ static int otp_select_filemode(struct mtd_file_info *mfi, int mode)
 # define otp_select_filemode(f,m)	-EOPNOTSUPP
 #endif
 
+static int mtd_do_writeoob(struct file *file, struct mtd_info *mtd,
+	uint64_t start, uint32_t length, void __user *ptr,
+	uint32_t __user *retp)
+{
+	struct mtd_oob_ops ops;
+	uint32_t retlen;
+	int ret = 0;
+
+	if (!(file->f_mode & FMODE_WRITE))
+		return -EPERM;
+
+	if (length > 4096)
+		return -EINVAL;
+
+	if (!mtd->write_oob)
+		ret = -EOPNOTSUPP;
+	else
+		ret = access_ok(VERIFY_READ, ptr, length) ? 0 : EFAULT;
+
+	if (ret)
+		return ret;
+
+	ops.ooblen = length;
+	ops.ooboffs = start & (mtd->oobsize - 1);
+	ops.datbuf = NULL;
+	ops.mode = MTD_OOB_PLACE;
+
+	if (ops.ooboffs && ops.ooblen > (mtd->oobsize - ops.ooboffs))
+		return -EINVAL;
+
+	ops.oobbuf = kmalloc(length, GFP_KERNEL);
+	if (!ops.oobbuf)
+		return -ENOMEM;
+
+	if (copy_from_user(ops.oobbuf, ptr, length)) {
+		kfree(ops.oobbuf);
+		return -EFAULT;
+	}
+
+	start &= ~((uint64_t)mtd->oobsize - 1);
+	ret = mtd->write_oob(mtd, start, &ops);
+
+	if (ops.oobretlen > 0xFFFFFFFFU)
+		ret = -EOVERFLOW;
+	retlen = ops.oobretlen;
+	if (copy_to_user(retp, &retlen, sizeof(length)))
+		ret = -EFAULT;
+
+	kfree(ops.oobbuf);
+	return ret;
+}
+
+static int mtd_do_readoob(struct mtd_info *mtd, uint64_t start,
+	uint32_t length, void __user *ptr, uint32_t __user *retp)
+{
+	struct mtd_oob_ops ops;
+	int ret = 0;
+
+	if (length > 4096)
+		return -EINVAL;
+
+	if (!mtd->read_oob)
+		ret = -EOPNOTSUPP;
+	else
+		ret = access_ok(VERIFY_WRITE, ptr,
+				length) ? 0 : -EFAULT;
+	if (ret)
+		return ret;
+
+	ops.ooblen = length;
+	ops.ooboffs = start & (mtd->oobsize - 1);
+	ops.datbuf = NULL;
+	ops.mode = MTD_OOB_PLACE;
+
+	if (ops.ooboffs && ops.ooblen > (mtd->oobsize - ops.ooboffs))
+		return -EINVAL;
+
+	ops.oobbuf = kmalloc(length, GFP_KERNEL);
+	if (!ops.oobbuf)
+		return -ENOMEM;
+
+	start &= ~((uint64_t)mtd->oobsize - 1);
+	ret = mtd->read_oob(mtd, start, &ops);
+
+	if (put_user(ops.oobretlen, retp))
+		ret = -EFAULT;
+	else if (ops.oobretlen && copy_to_user(ptr, ops.oobbuf,
+					    ops.oobretlen))
+		ret = -EFAULT;
+
+	kfree(ops.oobbuf);
+	return ret;
+}
+
 static int mtd_ioctl(struct inode *inode, struct file *file,
 		     u_int cmd, u_long arg)
 {
@@ -417,6 +512,7 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
 		break;
 
 	case MEMERASE:
+	case MEMERASE64:
 	{
 		struct erase_info *erase;
 
@@ -427,20 +523,32 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
 		if (!erase)
 			ret = -ENOMEM;
 		else {
-			struct erase_info_user einfo;
-
 			wait_queue_head_t waitq;
 			DECLARE_WAITQUEUE(wait, current);
 
 			init_waitqueue_head(&waitq);
 
-			if (copy_from_user(&einfo, argp,
-				    sizeof(struct erase_info_user))) {
-				kfree(erase);
-				return -EFAULT;
+			if (cmd == MEMERASE64) {
+				struct erase_info_user64 einfo64;
+
+				if (copy_from_user(&einfo64, argp,
+					    sizeof(struct erase_info_user64))) {
+					kfree(erase);
+					return -EFAULT;
+				}
+				erase->addr = einfo64.start;
+				erase->len = einfo64.length;
+			} else {
+				struct erase_info_user einfo32;
+
+				if (copy_from_user(&einfo32, argp,
+					    sizeof(struct erase_info_user))) {
+					kfree(erase);
+					return -EFAULT;
+				}
+				erase->addr = einfo32.start;
+				erase->len = einfo32.length;
 			}
-			erase->addr = einfo.start;
-			erase->len = einfo.length;
 			erase->mtd = mtd;
 			erase->callback = mtdchar_erase_callback;
 			erase->priv = (unsigned long)&waitq;
@@ -474,100 +582,56 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
 	case MEMWRITEOOB:
 	{
 		struct mtd_oob_buf buf;
-		struct mtd_oob_ops ops;
-		struct mtd_oob_buf __user *user_buf = argp;
-	        uint32_t retlen;
-
-		if(!(file->f_mode & FMODE_WRITE))
-			return -EPERM;
-
-		if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf)))
-			return -EFAULT;
-
-		if (buf.length > 4096)
-			return -EINVAL;
-
-		if (!mtd->write_oob)
-			ret = -EOPNOTSUPP;
-		else
-			ret = access_ok(VERIFY_READ, buf.ptr,
-					buf.length) ? 0 : EFAULT;
-
-		if (ret)
-			return ret;
-
-		ops.ooblen = buf.length;
-		ops.ooboffs = buf.start & (mtd->oobsize - 1);
-		ops.datbuf = NULL;
-		ops.mode = MTD_OOB_PLACE;
-
-		if (ops.ooboffs && ops.ooblen > (mtd->oobsize - ops.ooboffs))
-			return -EINVAL;
-
-		ops.oobbuf = kmalloc(buf.length, GFP_KERNEL);
-		if (!ops.oobbuf)
-			return -ENOMEM;
-
-		if (copy_from_user(ops.oobbuf, buf.ptr, buf.length)) {
-			kfree(ops.oobbuf);
-			return -EFAULT;
-		}
+		struct mtd_oob_buf __user *buf_user = argp;
 
-		buf.start &= ~(mtd->oobsize - 1);
-		ret = mtd->write_oob(mtd, buf.start, &ops);
-
-		if (ops.oobretlen > 0xFFFFFFFFU)
-			ret = -EOVERFLOW;
-		retlen = ops.oobretlen;
-		if (copy_to_user(&user_buf->length, &retlen, sizeof(buf.length)))
+		/* NOTE: writes return length to buf_user->length */
+		if (copy_from_user(&buf, argp, sizeof(buf)))
 			ret = -EFAULT;
-
-		kfree(ops.oobbuf);
+		else
+			ret = mtd_do_writeoob(file, mtd, buf.start, buf.length,
+				buf.ptr, &buf_user->length);
 		break;
-
 	}
 
 	case MEMREADOOB:
 	{
 		struct mtd_oob_buf buf;
-		struct mtd_oob_ops ops;
-
-		if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf)))
-			return -EFAULT;
-
-		if (buf.length > 4096)
-			return -EINVAL;
+		struct mtd_oob_buf __user *buf_user = argp;
 
-		if (!mtd->read_oob)
-			ret = -EOPNOTSUPP;
+		/* NOTE: writes return length to buf_user->start */
+		if (copy_from_user(&buf, argp, sizeof(buf)))
+			ret = -EFAULT;
 		else
-			ret = access_ok(VERIFY_WRITE, buf.ptr,
-					buf.length) ? 0 : -EFAULT;
-		if (ret)
-			return ret;
-
-		ops.ooblen = buf.length;
-		ops.ooboffs = buf.start & (mtd->oobsize - 1);
-		ops.datbuf = NULL;
-		ops.mode = MTD_OOB_PLACE;
+			ret = mtd_do_readoob(mtd, buf.start, buf.length,
+				buf.ptr, &buf_user->start);
+		break;
+	}
 
-		if (ops.ooboffs && ops.ooblen > (mtd->oobsize - ops.ooboffs))
-			return -EINVAL;
+	case MEMWRITEOOB64:
+	{
+		struct mtd_oob_buf64 buf;
+		struct mtd_oob_buf64 __user *buf_user = argp;
 
-		ops.oobbuf = kmalloc(buf.length, GFP_KERNEL);
-		if (!ops.oobbuf)
-			return -ENOMEM;
+		if (copy_from_user(&buf, argp, sizeof(buf)))
+			ret = -EFAULT;
+		else
+			ret = mtd_do_writeoob(file, mtd, buf.start, buf.length,
+				(void __user *)(uintptr_t)buf.usr_ptr,
+				&buf_user->length);
+		break;
+	}
 
-		buf.start &= ~(mtd->oobsize - 1);
-		ret = mtd->read_oob(mtd, buf.start, &ops);
+	case MEMREADOOB64:
+	{
+		struct mtd_oob_buf64 buf;
+		struct mtd_oob_buf64 __user *buf_user = argp;
 
-		if (put_user(ops.oobretlen, (uint32_t __user *)argp))
-			ret = -EFAULT;
-		else if (ops.oobretlen && copy_to_user(buf.ptr, ops.oobbuf,
-						    ops.oobretlen))
+		if (copy_from_user(&buf, argp, sizeof(buf)))
 			ret = -EFAULT;
-
-		kfree(ops.oobbuf);
+		else
+			ret = mtd_do_readoob(mtd, buf.start, buf.length,
+				(void __user *)(uintptr_t)buf.usr_ptr,
+				&buf_user->length);
 		break;
 	}
 
@@ -758,6 +822,68 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
 	return ret;
 } /* memory_ioctl */
 
+#ifdef CONFIG_COMPAT
+
+struct mtd_oob_buf32 {
+	u_int32_t start;
+	u_int32_t length;
+	compat_caddr_t ptr;	/* unsigned char* */
+};
+
+#define MEMWRITEOOB32		_IOWR('M', 3, struct mtd_oob_buf32)
+#define MEMREADOOB32		_IOWR('M', 4, struct mtd_oob_buf32)
+
+static long mtd_compat_ioctl(struct file *file, unsigned int cmd,
+	unsigned long arg)
+{
+	struct inode *inode = file->f_path.dentry->d_inode;
+	struct mtd_file_info *mfi = file->private_data;
+	struct mtd_info *mtd = mfi->mtd;
+	void __user *argp = compat_ptr(arg);
+	int ret = 0;
+
+	lock_kernel();
+
+	switch (cmd) {
+	case MEMWRITEOOB32:
+	{
+		struct mtd_oob_buf32 buf;
+		struct mtd_oob_buf32 __user *buf_user = argp;
+
+		if (copy_from_user(&buf, argp, sizeof(buf)))
+			ret = -EFAULT;
+		else
+			ret = mtd_do_writeoob(file, mtd, buf.start,
+				buf.length, compat_ptr(buf.ptr),
+				&buf_user->length);
+		break;
+	}
+
+	case MEMREADOOB32:
+	{
+		struct mtd_oob_buf32 buf;
+		struct mtd_oob_buf32 __user *buf_user = argp;
+
+		/* NOTE: writes return length to buf->start */
+		if (copy_from_user(&buf, argp, sizeof(buf)))
+			ret = -EFAULT;
+		else
+			ret = mtd_do_readoob(mtd, buf.start,
+				buf.length, compat_ptr(buf.ptr),
+				&buf_user->start);
+		break;
+	}
+	default:
+		ret = mtd_ioctl(inode, file, cmd, (unsigned long)argp);
+	}
+
+	unlock_kernel();
+
+	return ret;
+}
+
+#endif /* CONFIG_COMPAT */
+
 /*
  * try to determine where a shared mapping can be made
  * - only supported for NOMMU at the moment (MMU can't doesn't copy private
@@ -817,6 +943,9 @@ static const struct file_operations mtd_fops = {
 	.read		= mtd_read,
 	.write		= mtd_write,
 	.ioctl		= mtd_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl	= mtd_compat_ioctl,
+#endif
 	.open		= mtd_open,
 	.release	= mtd_close,
 	.mmap		= mtd_mmap,
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index bccb4b1ffc4..fac54a3fa3f 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -23,8 +23,15 @@
 
 #include "mtdcore.h"
 
-
-static struct class *mtd_class;
+static int mtd_cls_suspend(struct device *dev, pm_message_t state);
+static int mtd_cls_resume(struct device *dev);
+
+static struct class mtd_class = {
+	.name = "mtd",
+	.owner = THIS_MODULE,
+	.suspend = mtd_cls_suspend,
+	.resume = mtd_cls_resume,
+};
 
 /* These are exported solely for the purpose of mtd_blkdevs.c. You
    should not use them for _anything_ else */
@@ -52,7 +59,26 @@ static void mtd_release(struct device *dev)
 
 	/* remove /dev/mtdXro node if needed */
 	if (index)
-		device_destroy(mtd_class, index + 1);
+		device_destroy(&mtd_class, index + 1);
+}
+
+static int mtd_cls_suspend(struct device *dev, pm_message_t state)
+{
+	struct mtd_info *mtd = dev_to_mtd(dev);
+	
+	if (mtd->suspend)
+		return mtd->suspend(mtd);
+	else
+		return 0;
+}
+
+static int mtd_cls_resume(struct device *dev)
+{
+	struct mtd_info *mtd = dev_to_mtd(dev);
+	
+	if (mtd->resume)
+		mtd->resume(mtd);
+	return 0;
 }
 
 static ssize_t mtd_type_show(struct device *dev,
@@ -269,7 +295,7 @@ int add_mtd_device(struct mtd_info *mtd)
 			 * physical device.
 			 */
 			mtd->dev.type = &mtd_devtype;
-			mtd->dev.class = mtd_class;
+			mtd->dev.class = &mtd_class;
 			mtd->dev.devt = MTD_DEVT(i);
 			dev_set_name(&mtd->dev, "mtd%d", i);
 			if (device_register(&mtd->dev) != 0) {
@@ -278,7 +304,7 @@ int add_mtd_device(struct mtd_info *mtd)
 			}
 
 			if (MTD_DEVT(i))
-				device_create(mtd_class, mtd->dev.parent,
+				device_create(&mtd_class, mtd->dev.parent,
 						MTD_DEVT(i) + 1,
 						NULL, "mtd%dro", i);
 
@@ -604,11 +630,12 @@ done:
 
 static int __init init_mtd(void)
 {
-	mtd_class = class_create(THIS_MODULE, "mtd");
+	int ret;
+	ret = class_register(&mtd_class);
 
-	if (IS_ERR(mtd_class)) {
-		pr_err("Error creating mtd class.\n");
-		return PTR_ERR(mtd_class);
+	if (ret) {
+		pr_err("Error registering mtd class: %d\n", ret);
+		return ret;
 	}
 #ifdef CONFIG_PROC_FS
 	if ((proc_mtd = create_proc_entry( "mtd", 0, NULL )))
@@ -623,7 +650,7 @@ static void __exit cleanup_mtd(void)
         if (proc_mtd)
 		remove_proc_entry( "mtd", NULL);
 #endif /* CONFIG_PROC_FS */
-	class_destroy(mtd_class);
+	class_unregister(&mtd_class);
 }
 
 module_init(init_mtd);
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 29675edb44b..349fcbe5cc0 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -27,9 +27,7 @@ struct mtd_part {
 	struct mtd_info mtd;
 	struct mtd_info *master;
 	uint64_t offset;
-	int index;
 	struct list_head list;
-	int registered;
 };
 
 /*
@@ -321,8 +319,7 @@ int del_mtd_partitions(struct mtd_info *master)
 	list_for_each_entry_safe(slave, next, &mtd_partitions, list)
 		if (slave->master == master) {
 			list_del(&slave->list);
-			if (slave->registered)
-				del_mtd_device(&slave->mtd);
+			del_mtd_device(&slave->mtd);
 			kfree(slave);
 		}
 
@@ -395,7 +392,7 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 		slave->mtd.get_fact_prot_info = part_get_fact_prot_info;
 	if (master->sync)
 		slave->mtd.sync = part_sync;
-	if (!partno && master->suspend && master->resume) {
+	if (!partno && !master->dev.class && master->suspend && master->resume) {
 			slave->mtd.suspend = part_suspend;
 			slave->mtd.resume = part_resume;
 	}
@@ -412,7 +409,6 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 	slave->mtd.erase = part_erase;
 	slave->master = master;
 	slave->offset = part->offset;
-	slave->index = partno;
 
 	if (slave->offset == MTDPART_OFS_APPEND)
 		slave->offset = cur_offset;
@@ -500,15 +496,9 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 	}
 
 out_register:
-	if (part->mtdp) {
-		/* store the object pointer (caller may or may not register it*/
-		*part->mtdp = &slave->mtd;
-		slave->registered = 0;
-	} else {
-		/* register our partition */
-		add_mtd_device(&slave->mtd);
-		slave->registered = 1;
-	}
+	/* register our partition */
+	add_mtd_device(&slave->mtd);
+
 	return slave;
 }
 
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index f3276897859..ce96c091f01 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -74,6 +74,12 @@ config MTD_NAND_AMS_DELTA
 	help
 	  Support for NAND flash on Amstrad E3 (Delta).
 
+config MTD_NAND_OMAP2
+	tristate "NAND Flash device on OMAP2 and OMAP3"
+	depends on ARM && MTD_NAND && (ARCH_OMAP2 || ARCH_OMAP3)
+	help
+          Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms.
+
 config MTD_NAND_TS7250
 	tristate "NAND Flash device on TS-7250 board"
 	depends on MACH_TS72XX
@@ -139,27 +145,27 @@ config MTD_NAND_PPCHAMELEONEVB
 	  This enables the NAND flash driver on the PPChameleon EVB Board.
 
 config MTD_NAND_S3C2410
-	tristate "NAND Flash support for S3C2410/S3C2440 SoC"
-	depends on ARCH_S3C2410
+	tristate "NAND Flash support for Samsung S3C SoCs"
+	depends on ARCH_S3C2410 || ARCH_S3C64XX
 	help
-	  This enables the NAND flash controller on the S3C2410 and S3C2440
+	  This enables the NAND flash controller on the S3C24xx and S3C64xx
 	  SoCs
 
 	  No board specific support is done by this driver, each board
 	  must advertise a platform_device for the driver to attach.
 
 config MTD_NAND_S3C2410_DEBUG
-	bool "S3C2410 NAND driver debug"
+	bool "Samsung S3C NAND driver debug"
 	depends on MTD_NAND_S3C2410
 	help
-	  Enable debugging of the S3C2410 NAND driver
+	  Enable debugging of the S3C NAND driver
 
 config MTD_NAND_S3C2410_HWECC
-	bool "S3C2410 NAND Hardware ECC"
+	bool "Samsung S3C NAND Hardware ECC"
 	depends on MTD_NAND_S3C2410
 	help
-	  Enable the use of the S3C2410's internal ECC generator when
-	  using NAND. Early versions of the chip have had problems with
+	  Enable the use of the controller's internal ECC generator when
+	  using NAND. Early versions of the chips have had problems with
 	  incorrect ECC generation, and if using these, the default of
 	  software ECC is preferable.
 
@@ -171,7 +177,7 @@ config MTD_NAND_NDFC
 	 NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
 
 config MTD_NAND_S3C2410_CLKSTOP
-	bool "S3C2410 NAND IDLE clock stop"
+	bool "Samsung S3C NAND IDLE clock stop"
 	depends on MTD_NAND_S3C2410
 	default n
 	help
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index d33860ac42c..f3a786b3cff 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_MTD_NAND_CS553X)		+= cs553x_nand.o
 obj-$(CONFIG_MTD_NAND_NDFC)		+= ndfc.o
 obj-$(CONFIG_MTD_NAND_ATMEL)		+= atmel_nand.o
 obj-$(CONFIG_MTD_NAND_GPIO)		+= gpio.o
+obj-$(CONFIG_MTD_NAND_OMAP2) 		+= omap2.o
 obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
 obj-$(CONFIG_MTD_NAND_BASLER_EXCITE)	+= excite_nandflash.o
 obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 47a33cec379..2802992b39d 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -24,6 +24,7 @@
 
 #include <linux/slab.h>
 #include <linux/module.h>
+#include <linux/moduleparam.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -47,6 +48,9 @@
 #define no_ecc		0
 #endif
 
+static int on_flash_bbt = 0;
+module_param(on_flash_bbt, int, 0);
+
 /* Register access macros */
 #define ecc_readl(add, reg)				\
 	__raw_readl(add + ATMEL_ECC_##reg)
@@ -459,12 +463,17 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 
 	if (host->board->det_pin) {
 		if (gpio_get_value(host->board->det_pin)) {
-			printk("No SmartMedia card inserted.\n");
+			printk(KERN_INFO "No SmartMedia card inserted.\n");
 			res = ENXIO;
 			goto err_no_card;
 		}
 	}
 
+	if (on_flash_bbt) {
+		printk(KERN_INFO "atmel_nand: Use On Flash BBT\n");
+		nand_chip->options |= NAND_USE_FLASH_BBT;
+	}
+
 	/* first scan to find the device and get the page size */
 	if (nand_scan_ident(mtd, 1)) {
 		res = -ENXIO;
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index 4c2a67ca801..8506e7e606f 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -458,7 +458,7 @@ static irqreturn_t bf5xx_nand_dma_irq(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int bf5xx_nand_dma_rw(struct mtd_info *mtd,
+static void bf5xx_nand_dma_rw(struct mtd_info *mtd,
 				uint8_t *buf, int is_read)
 {
 	struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
@@ -496,11 +496,20 @@ static int bf5xx_nand_dma_rw(struct mtd_info *mtd,
 	/* setup DMA register with Blackfin DMA API */
 	set_dma_config(CH_NFC, 0x0);
 	set_dma_start_addr(CH_NFC, (unsigned long) buf);
+
+/* The DMAs have different size on BF52x and BF54x */
+#ifdef CONFIG_BF52x
+	set_dma_x_count(CH_NFC, (page_size >> 1));
+	set_dma_x_modify(CH_NFC, 2);
+	val = DI_EN | WDSIZE_16;
+#endif
+
+#ifdef CONFIG_BF54x
 	set_dma_x_count(CH_NFC, (page_size >> 2));
 	set_dma_x_modify(CH_NFC, 4);
-
-	/* setup write or read operation */
 	val = DI_EN | WDSIZE_32;
+#endif
+	/* setup write or read operation */
 	if (is_read)
 		val |= WNR;
 	set_dma_config(CH_NFC, val);
@@ -512,8 +521,6 @@ static int bf5xx_nand_dma_rw(struct mtd_info *mtd,
 	else
 		bfin_write_NFC_PGCTL(0x2);
 	wait_for_completion(&info->dma_completion);
-
-	return 0;
 }
 
 static void bf5xx_nand_dma_read_buf(struct mtd_info *mtd,
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 02700f769b8..0fad6487e6f 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -44,7 +44,7 @@
  * and some flavors of secondary chipselect (e.g. based on A12) as used
  * with multichip packages.
  *
- * The 1-bit ECC hardware is supported, but not yet the newer 4-bit ECC
+ * The 1-bit ECC hardware is supported, as well as the newer 4-bit ECC
  * available on chips like the DM355 and OMAP-L137 and needed with the
  * more error-prone MLC NAND chips.
  *
@@ -54,11 +54,14 @@
 struct davinci_nand_info {
 	struct mtd_info		mtd;
 	struct nand_chip	chip;
+	struct nand_ecclayout	ecclayout;
 
 	struct device		*dev;
 	struct clk		*clk;
 	bool			partitioned;
 
+	bool			is_readmode;
+
 	void __iomem		*base;
 	void __iomem		*vaddr;
 
@@ -73,6 +76,7 @@ struct davinci_nand_info {
 };
 
 static DEFINE_SPINLOCK(davinci_nand_lock);
+static bool ecc4_busy;
 
 #define to_davinci_nand(m) container_of(m, struct davinci_nand_info, mtd)
 
@@ -218,6 +222,192 @@ static int nand_davinci_correct_1bit(struct mtd_info *mtd, u_char *dat,
 /*----------------------------------------------------------------------*/
 
 /*
+ * 4-bit hardware ECC ... context maintained over entire AEMIF
+ *
+ * This is a syndrome engine, but we avoid NAND_ECC_HW_SYNDROME
+ * since that forces use of a problematic "infix OOB" layout.
+ * Among other things, it trashes manufacturer bad block markers.
+ * Also, and specific to this hardware, it ECC-protects the "prepad"
+ * in the OOB ... while having ECC protection for parts of OOB would
+ * seem useful, the current MTD stack sometimes wants to update the
+ * OOB without recomputing ECC.
+ */
+
+static void nand_davinci_hwctl_4bit(struct mtd_info *mtd, int mode)
+{
+	struct davinci_nand_info *info = to_davinci_nand(mtd);
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&davinci_nand_lock, flags);
+
+	/* Start 4-bit ECC calculation for read/write */
+	val = davinci_nand_readl(info, NANDFCR_OFFSET);
+	val &= ~(0x03 << 4);
+	val |= (info->core_chipsel << 4) | BIT(12);
+	davinci_nand_writel(info, NANDFCR_OFFSET, val);
+
+	info->is_readmode = (mode == NAND_ECC_READ);
+
+	spin_unlock_irqrestore(&davinci_nand_lock, flags);
+}
+
+/* Read raw ECC code after writing to NAND. */
+static void
+nand_davinci_readecc_4bit(struct davinci_nand_info *info, u32 code[4])
+{
+	const u32 mask = 0x03ff03ff;
+
+	code[0] = davinci_nand_readl(info, NAND_4BIT_ECC1_OFFSET) & mask;
+	code[1] = davinci_nand_readl(info, NAND_4BIT_ECC2_OFFSET) & mask;
+	code[2] = davinci_nand_readl(info, NAND_4BIT_ECC3_OFFSET) & mask;
+	code[3] = davinci_nand_readl(info, NAND_4BIT_ECC4_OFFSET) & mask;
+}
+
+/* Terminate read ECC; or return ECC (as bytes) of data written to NAND. */
+static int nand_davinci_calculate_4bit(struct mtd_info *mtd,
+		const u_char *dat, u_char *ecc_code)
+{
+	struct davinci_nand_info *info = to_davinci_nand(mtd);
+	u32 raw_ecc[4], *p;
+	unsigned i;
+
+	/* After a read, terminate ECC calculation by a dummy read
+	 * of some 4-bit ECC register.  ECC covers everything that
+	 * was read; correct() just uses the hardware state, so
+	 * ecc_code is not needed.
+	 */
+	if (info->is_readmode) {
+		davinci_nand_readl(info, NAND_4BIT_ECC1_OFFSET);
+		return 0;
+	}
+
+	/* Pack eight raw 10-bit ecc values into ten bytes, making
+	 * two passes which each convert four values (in upper and
+	 * lower halves of two 32-bit words) into five bytes.  The
+	 * ROM boot loader uses this same packing scheme.
+	 */
+	nand_davinci_readecc_4bit(info, raw_ecc);
+	for (i = 0, p = raw_ecc; i < 2; i++, p += 2) {
+		*ecc_code++ =   p[0]        & 0xff;
+		*ecc_code++ = ((p[0] >>  8) & 0x03) | ((p[0] >> 14) & 0xfc);
+		*ecc_code++ = ((p[0] >> 22) & 0x0f) | ((p[1] <<  4) & 0xf0);
+		*ecc_code++ = ((p[1] >>  4) & 0x3f) | ((p[1] >> 10) & 0xc0);
+		*ecc_code++ =  (p[1] >> 18) & 0xff;
+	}
+
+	return 0;
+}
+
+/* Correct up to 4 bits in data we just read, using state left in the
+ * hardware plus the ecc_code computed when it was first written.
+ */
+static int nand_davinci_correct_4bit(struct mtd_info *mtd,
+		u_char *data, u_char *ecc_code, u_char *null)
+{
+	int i;
+	struct davinci_nand_info *info = to_davinci_nand(mtd);
+	unsigned short ecc10[8];
+	unsigned short *ecc16;
+	u32 syndrome[4];
+	unsigned num_errors, corrected;
+
+	/* All bytes 0xff?  It's an erased page; ignore its ECC. */
+	for (i = 0; i < 10; i++) {
+		if (ecc_code[i] != 0xff)
+			goto compare;
+	}
+	return 0;
+
+compare:
+	/* Unpack ten bytes into eight 10 bit values.  We know we're
+	 * little-endian, and use type punning for less shifting/masking.
+	 */
+	if (WARN_ON(0x01 & (unsigned) ecc_code))
+		return -EINVAL;
+	ecc16 = (unsigned short *)ecc_code;
+
+	ecc10[0] =  (ecc16[0] >>  0) & 0x3ff;
+	ecc10[1] = ((ecc16[0] >> 10) & 0x3f) | ((ecc16[1] << 6) & 0x3c0);
+	ecc10[2] =  (ecc16[1] >>  4) & 0x3ff;
+	ecc10[3] = ((ecc16[1] >> 14) & 0x3)  | ((ecc16[2] << 2) & 0x3fc);
+	ecc10[4] =  (ecc16[2] >>  8)         | ((ecc16[3] << 8) & 0x300);
+	ecc10[5] =  (ecc16[3] >>  2) & 0x3ff;
+	ecc10[6] = ((ecc16[3] >> 12) & 0xf)  | ((ecc16[4] << 4) & 0x3f0);
+	ecc10[7] =  (ecc16[4] >>  6) & 0x3ff;
+
+	/* Tell ECC controller about the expected ECC codes. */
+	for (i = 7; i >= 0; i--)
+		davinci_nand_writel(info, NAND_4BIT_ECC_LOAD_OFFSET, ecc10[i]);
+
+	/* Allow time for syndrome calculation ... then read it.
+	 * A syndrome of all zeroes 0 means no detected errors.
+	 */
+	davinci_nand_readl(info, NANDFSR_OFFSET);
+	nand_davinci_readecc_4bit(info, syndrome);
+	if (!(syndrome[0] | syndrome[1] | syndrome[2] | syndrome[3]))
+		return 0;
+
+	/* Start address calculation, and wait for it to complete.
+	 * We _could_ start reading more data while this is working,
+	 * to speed up the overall page read.
+	 */
+	davinci_nand_writel(info, NANDFCR_OFFSET,
+			davinci_nand_readl(info, NANDFCR_OFFSET) | BIT(13));
+	for (;;) {
+		u32	fsr = davinci_nand_readl(info, NANDFSR_OFFSET);
+
+		switch ((fsr >> 8) & 0x0f) {
+		case 0:		/* no error, should not happen */
+			return 0;
+		case 1:		/* five or more errors detected */
+			return -EIO;
+		case 2:		/* error addresses computed */
+		case 3:
+			num_errors = 1 + ((fsr >> 16) & 0x03);
+			goto correct;
+		default:	/* still working on it */
+			cpu_relax();
+			continue;
+		}
+	}
+
+correct:
+	/* correct each error */
+	for (i = 0, corrected = 0; i < num_errors; i++) {
+		int error_address, error_value;
+
+		if (i > 1) {
+			error_address = davinci_nand_readl(info,
+						NAND_ERR_ADD2_OFFSET);
+			error_value = davinci_nand_readl(info,
+						NAND_ERR_ERRVAL2_OFFSET);
+		} else {
+			error_address = davinci_nand_readl(info,
+						NAND_ERR_ADD1_OFFSET);
+			error_value = davinci_nand_readl(info,
+						NAND_ERR_ERRVAL1_OFFSET);
+		}
+
+		if (i & 1) {
+			error_address >>= 16;
+			error_value >>= 16;
+		}
+		error_address &= 0x3ff;
+		error_address = (512 + 7) - error_address;
+
+		if (error_address < 512) {
+			data[error_address] ^= error_value;
+			corrected++;
+		}
+	}
+
+	return corrected;
+}
+
+/*----------------------------------------------------------------------*/
+
+/*
  * NOTE:  NAND boot requires ALE == EM_A[1], CLE == EM_A[2], so that's
  * how these chips are normally wired.  This translates to both 8 and 16
  * bit busses using ALE == BIT(3) in byte addresses, and CLE == BIT(4).
@@ -294,6 +484,23 @@ static void __init nand_dm6446evm_flash_init(struct davinci_nand_info *info)
 
 /*----------------------------------------------------------------------*/
 
+/* An ECC layout for using 4-bit ECC with small-page flash, storing
+ * ten ECC bytes plus the manufacturer's bad block marker byte, and
+ * and not overlapping the default BBT markers.
+ */
+static struct nand_ecclayout hwecc4_small __initconst = {
+	.eccbytes = 10,
+	.eccpos = { 0, 1, 2, 3, 4,
+		/* offset 5 holds the badblock marker */
+		6, 7,
+		13, 14, 15, },
+	.oobfree = {
+		{.offset = 8, .length = 5, },
+		{.offset = 16, },
+	},
+};
+
+
 static int __init nand_davinci_probe(struct platform_device *pdev)
 {
 	struct davinci_nand_pdata	*pdata = pdev->dev.platform_data;
@@ -306,6 +513,10 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 	uint32_t			val;
 	nand_ecc_modes_t		ecc_mode;
 
+	/* insist on board-specific configuration */
+	if (!pdata)
+		return -ENODEV;
+
 	/* which external chipselect will we be managing? */
 	if (pdev->id < 0 || pdev->id > 3)
 		return -ENODEV;
@@ -351,7 +562,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 	info->chip.select_chip	= nand_davinci_select_chip;
 
 	/* options such as NAND_USE_FLASH_BBT or 16-bit widths */
-	info->chip.options	= pdata ? pdata->options : 0;
+	info->chip.options	= pdata->options;
 
 	info->ioaddr		= (uint32_t __force) vaddr;
 
@@ -360,14 +571,8 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 	info->mask_chipsel	= pdata->mask_chipsel;
 
 	/* use nandboot-capable ALE/CLE masks by default */
-	if (pdata && pdata->mask_ale)
-		info->mask_ale	= pdata->mask_cle;
-	else
-		info->mask_ale	= MASK_ALE;
-	if (pdata && pdata->mask_cle)
-		info->mask_cle	= pdata->mask_cle;
-	else
-		info->mask_cle	= MASK_CLE;
+	info->mask_ale		= pdata->mask_cle ? : MASK_ALE;
+	info->mask_cle		= pdata->mask_cle ? : MASK_CLE;
 
 	/* Set address of hardware control function */
 	info->chip.cmd_ctrl	= nand_davinci_hwcontrol;
@@ -377,30 +582,44 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 	info->chip.read_buf     = nand_davinci_read_buf;
 	info->chip.write_buf    = nand_davinci_write_buf;
 
-	/* use board-specific ECC config; else, the best available */
-	if (pdata)
-		ecc_mode = pdata->ecc_mode;
-	else
-		ecc_mode = NAND_ECC_HW;
+	/* Use board-specific ECC config */
+	ecc_mode		= pdata->ecc_mode;
 
+	ret = -EINVAL;
 	switch (ecc_mode) {
 	case NAND_ECC_NONE:
 	case NAND_ECC_SOFT:
+		pdata->ecc_bits = 0;
 		break;
 	case NAND_ECC_HW:
-		info->chip.ecc.calculate = nand_davinci_calculate_1bit;
-		info->chip.ecc.correct = nand_davinci_correct_1bit;
-		info->chip.ecc.hwctl = nand_davinci_hwctl_1bit;
+		if (pdata->ecc_bits == 4) {
+			/* No sanity checks:  CPUs must support this,
+			 * and the chips may not use NAND_BUSWIDTH_16.
+			 */
+
+			/* No sharing 4-bit hardware between chipselects yet */
+			spin_lock_irq(&davinci_nand_lock);
+			if (ecc4_busy)
+				ret = -EBUSY;
+			else
+				ecc4_busy = true;
+			spin_unlock_irq(&davinci_nand_lock);
+
+			if (ret == -EBUSY)
+				goto err_ecc;
+
+			info->chip.ecc.calculate = nand_davinci_calculate_4bit;
+			info->chip.ecc.correct = nand_davinci_correct_4bit;
+			info->chip.ecc.hwctl = nand_davinci_hwctl_4bit;
+			info->chip.ecc.bytes = 10;
+		} else {
+			info->chip.ecc.calculate = nand_davinci_calculate_1bit;
+			info->chip.ecc.correct = nand_davinci_correct_1bit;
+			info->chip.ecc.hwctl = nand_davinci_hwctl_1bit;
+			info->chip.ecc.bytes = 3;
+		}
 		info->chip.ecc.size = 512;
-		info->chip.ecc.bytes = 3;
 		break;
-	case NAND_ECC_HW_SYNDROME:
-		/* FIXME implement */
-		info->chip.ecc.size = 512;
-		info->chip.ecc.bytes = 10;
-
-		dev_warn(&pdev->dev, "4-bit ECC nyet supported\n");
-		/* FALL THROUGH */
 	default:
 		ret = -EINVAL;
 		goto err_ecc;
@@ -441,12 +660,56 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 	spin_unlock_irq(&davinci_nand_lock);
 
 	/* Scan to find existence of the device(s) */
-	ret = nand_scan(&info->mtd, pdata->mask_chipsel ? 2 : 1);
+	ret = nand_scan_ident(&info->mtd, pdata->mask_chipsel ? 2 : 1);
 	if (ret < 0) {
 		dev_dbg(&pdev->dev, "no NAND chip(s) found\n");
 		goto err_scan;
 	}
 
+	/* Update ECC layout if needed ... for 1-bit HW ECC, the default
+	 * is OK, but it allocates 6 bytes when only 3 are needed (for
+	 * each 512 bytes).  For the 4-bit HW ECC, that default is not
+	 * usable:  10 bytes are needed, not 6.
+	 */
+	if (pdata->ecc_bits == 4) {
+		int	chunks = info->mtd.writesize / 512;
+
+		if (!chunks || info->mtd.oobsize < 16) {
+			dev_dbg(&pdev->dev, "too small\n");
+			ret = -EINVAL;
+			goto err_scan;
+		}
+
+		/* For small page chips, preserve the manufacturer's
+		 * badblock marking data ... and make sure a flash BBT
+		 * table marker fits in the free bytes.
+		 */
+		if (chunks == 1) {
+			info->ecclayout = hwecc4_small;
+			info->ecclayout.oobfree[1].length =
+				info->mtd.oobsize - 16;
+			goto syndrome_done;
+		}
+
+		/* For large page chips we'll be wanting to use a
+		 * not-yet-implemented mode that reads OOB data
+		 * before reading the body of the page, to avoid
+		 * the "infix OOB" model of NAND_ECC_HW_SYNDROME
+		 * (and preserve manufacturer badblock markings).
+		 */
+		dev_warn(&pdev->dev, "no 4-bit ECC support yet "
+				"for large page NAND\n");
+		ret = -EIO;
+		goto err_scan;
+
+syndrome_done:
+		info->chip.ecc.layout = &info->ecclayout;
+	}
+
+	ret = nand_scan_tail(&info->mtd);
+	if (ret < 0)
+		goto err_scan;
+
 	if (mtd_has_partitions()) {
 		struct mtd_partition	*mtd_parts = NULL;
 		int			mtd_parts_nb = 0;
@@ -455,22 +718,11 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 			static const char *probes[] __initconst =
 				{ "cmdlinepart", NULL };
 
-			const char		*master_name;
-
-			/* Set info->mtd.name = 0 temporarily */
-			master_name		= info->mtd.name;
-			info->mtd.name		= (char *)0;
-
-			/* info->mtd.name == 0, means: don't bother checking
-			   <mtd-id> */
 			mtd_parts_nb = parse_mtd_partitions(&info->mtd, probes,
 							    &mtd_parts, 0);
-
-			/* Restore info->mtd.name */
-			info->mtd.name = master_name;
 		}
 
-		if (mtd_parts_nb <= 0 && pdata) {
+		if (mtd_parts_nb <= 0) {
 			mtd_parts = pdata->parts;
 			mtd_parts_nb = pdata->nr_parts;
 		}
@@ -483,7 +735,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 				info->partitioned = true;
 		}
 
-	} else if (pdata && pdata->nr_parts) {
+	} else if (pdata->nr_parts) {
 		dev_warn(&pdev->dev, "ignoring %d default partitions on %s\n",
 				pdata->nr_parts, info->mtd.name);
 	}
@@ -509,6 +761,11 @@ err_scan:
 err_clk_enable:
 	clk_put(info->clk);
 
+	spin_lock_irq(&davinci_nand_lock);
+	if (ecc_mode == NAND_ECC_HW_SYNDROME)
+		ecc4_busy = false;
+	spin_unlock_irq(&davinci_nand_lock);
+
 err_ecc:
 err_clk:
 err_ioremap:
@@ -532,6 +789,11 @@ static int __exit nand_davinci_remove(struct platform_device *pdev)
 	else
 		status = del_mtd_device(&info->mtd);
 
+	spin_lock_irq(&davinci_nand_lock);
+	if (info->chip.ecc.mode == NAND_ECC_HW_SYNDROME)
+		ecc4_busy = false;
+	spin_unlock_irq(&davinci_nand_lock);
+
 	iounmap(info->base);
 	iounmap(info->vaddr);
 
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 40c26080ecd..76beea40d2c 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -138,7 +138,14 @@ static struct nand_ecclayout nand_hw_eccoob_8 = {
 static struct nand_ecclayout nand_hw_eccoob_16 = {
 	.eccbytes = 5,
 	.eccpos = {6, 7, 8, 9, 10},
-	.oobfree = {{0, 6}, {12, 4}, }
+	.oobfree = {{0, 5}, {11, 5}, }
+};
+
+static struct nand_ecclayout nand_hw_eccoob_64 = {
+	.eccbytes = 20,
+	.eccpos = {6, 7, 8, 9, 10, 22, 23, 24, 25, 26,
+		   38, 39, 40, 41, 42, 54, 55, 56, 57, 58},
+	.oobfree = {{2, 4}, {11, 10}, {27, 10}, {43, 10}, {59, 5}, }
 };
 
 #ifdef CONFIG_MTD_PARTITIONS
@@ -192,7 +199,7 @@ static void wait_op_done(struct mxc_nand_host *host, int max_retries,
 			}
 			udelay(1);
 		}
-		if (max_retries <= 0)
+		if (max_retries < 0)
 			DEBUG(MTD_DEBUG_LEVEL0, "%s(%d): INT not set\n",
 			      __func__, param);
 	}
@@ -795,9 +802,13 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 		send_addr(host, (page_addr & 0xff), false);
 
 		if (host->pagesize_2k) {
-			send_addr(host, (page_addr >> 8) & 0xFF, false);
-			if (mtd->size >= 0x40000000)
+			if (mtd->size >= 0x10000000) {
+				/* paddr_8 - paddr_15 */
+				send_addr(host, (page_addr >> 8) & 0xff, false);
 				send_addr(host, (page_addr >> 16) & 0xff, true);
+			} else
+				/* paddr_8 - paddr_15 */
+				send_addr(host, (page_addr >> 8) & 0xff, true);
 		} else {
 			/* One more address cycle for higher density devices */
 			if (mtd->size >= 0x4000000) {
@@ -923,7 +934,6 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 		this->ecc.mode = NAND_ECC_HW;
 		this->ecc.size = 512;
 		this->ecc.bytes = 3;
-		this->ecc.layout = &nand_hw_eccoob_8;
 		tmp = readw(host->regs + NFC_CONFIG1);
 		tmp |= NFC_ECC_EN;
 		writew(tmp, host->regs + NFC_CONFIG1);
@@ -957,12 +967,44 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 		this->ecc.layout = &nand_hw_eccoob_16;
 	}
 
-	host->pagesize_2k = 0;
+	/* first scan to find the device and get the page size */
+	if (nand_scan_ident(mtd, 1)) {
+		err = -ENXIO;
+		goto escan;
+	}
 
-	/* Scan to find existence of the device */
-	if (nand_scan(mtd, 1)) {
-		DEBUG(MTD_DEBUG_LEVEL0,
-		      "MXC_ND: Unable to find any NAND device.\n");
+	host->pagesize_2k = (mtd->writesize == 2048) ? 1 : 0;
+
+	if (this->ecc.mode == NAND_ECC_HW) {
+		switch (mtd->oobsize) {
+		case 8:
+			this->ecc.layout = &nand_hw_eccoob_8;
+			break;
+		case 16:
+			this->ecc.layout = &nand_hw_eccoob_16;
+			break;
+		case 64:
+			this->ecc.layout = &nand_hw_eccoob_64;
+			break;
+		default:
+			/* page size not handled by HW ECC */
+			/* switching back to soft ECC */
+			this->ecc.size = 512;
+			this->ecc.bytes = 3;
+			this->ecc.layout = &nand_hw_eccoob_8;
+			this->ecc.mode = NAND_ECC_SOFT;
+			this->ecc.calculate = NULL;
+			this->ecc.correct = NULL;
+			this->ecc.hwctl = NULL;
+			tmp = readw(host->regs + NFC_CONFIG1);
+			tmp &= ~NFC_ECC_EN;
+			writew(tmp, host->regs + NFC_CONFIG1);
+			break;
+		}
+	}
+
+	/* second phase scan */
+	if (nand_scan_tail(mtd)) {
 		err = -ENXIO;
 		goto escan;
 	}
@@ -985,7 +1027,7 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 	return 0;
 
 escan:
-	free_irq(host->irq, NULL);
+	free_irq(host->irq, host);
 eirq:
 	iounmap(host->regs);
 eres:
@@ -1005,7 +1047,7 @@ static int __devexit mxcnd_remove(struct platform_device *pdev)
 	platform_set_drvdata(pdev, NULL);
 
 	nand_release(&host->mtd);
-	free_irq(host->irq, NULL);
+	free_irq(host->irq, host);
 	iounmap(host->regs);
 	kfree(host);
 
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 3d7ed432fa4..8c21b89d2d0 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -2756,7 +2756,8 @@ int nand_scan_tail(struct mtd_info *mtd)
 	 * the out of band area
 	 */
 	chip->ecc.layout->oobavail = 0;
-	for (i = 0; chip->ecc.layout->oobfree[i].length; i++)
+	for (i = 0; chip->ecc.layout->oobfree[i].length
+			&& i < ARRAY_SIZE(chip->ecc.layout->oobfree); i++)
 		chip->ecc.layout->oobavail +=
 			chip->ecc.layout->oobfree[i].length;
 	mtd->oobavail = chip->ecc.layout->oobavail;
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index 868147acce2..c0cb87d6d16 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -428,8 +428,8 @@ EXPORT_SYMBOL(nand_calculate_ecc);
 int nand_correct_data(struct mtd_info *mtd, unsigned char *buf,
 		      unsigned char *read_ecc, unsigned char *calc_ecc)
 {
-	unsigned char b0, b1, b2;
-	unsigned char byte_addr, bit_addr;
+	unsigned char b0, b1, b2, bit_addr;
+	unsigned int byte_addr;
 	/* 256 or 512 bytes/ecc  */
 	const uint32_t eccsize_mult =
 			(((struct nand_chip *)mtd->priv)->ecc.size) >> 8;
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
new file mode 100644
index 00000000000..0cd76f89f4b
--- /dev/null
+++ b/drivers/mtd/nand/omap2.c
@@ -0,0 +1,776 @@
+/*
+ * Copyright © 2004 Texas Instruments, Jian Zhang <jzhang@ti.com>
+ * Copyright © 2004 Micron Technology Inc.
+ * Copyright © 2004 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/io.h>
+
+#include <asm/dma.h>
+
+#include <mach/gpmc.h>
+#include <mach/nand.h>
+
+#define GPMC_IRQ_STATUS		0x18
+#define GPMC_ECC_CONFIG		0x1F4
+#define GPMC_ECC_CONTROL	0x1F8
+#define GPMC_ECC_SIZE_CONFIG	0x1FC
+#define GPMC_ECC1_RESULT	0x200
+
+#define	DRIVER_NAME	"omap2-nand"
+
+/* size (4 KiB) for IO mapping */
+#define	NAND_IO_SIZE	SZ_4K
+
+#define	NAND_WP_OFF	0
+#define NAND_WP_BIT	0x00000010
+#define WR_RD_PIN_MONITORING	0x00600000
+
+#define	GPMC_BUF_FULL	0x00000001
+#define	GPMC_BUF_EMPTY	0x00000000
+
+#define NAND_Ecc_P1e		(1 << 0)
+#define NAND_Ecc_P2e		(1 << 1)
+#define NAND_Ecc_P4e		(1 << 2)
+#define NAND_Ecc_P8e		(1 << 3)
+#define NAND_Ecc_P16e		(1 << 4)
+#define NAND_Ecc_P32e		(1 << 5)
+#define NAND_Ecc_P64e		(1 << 6)
+#define NAND_Ecc_P128e		(1 << 7)
+#define NAND_Ecc_P256e		(1 << 8)
+#define NAND_Ecc_P512e		(1 << 9)
+#define NAND_Ecc_P1024e		(1 << 10)
+#define NAND_Ecc_P2048e		(1 << 11)
+
+#define NAND_Ecc_P1o		(1 << 16)
+#define NAND_Ecc_P2o		(1 << 17)
+#define NAND_Ecc_P4o		(1 << 18)
+#define NAND_Ecc_P8o		(1 << 19)
+#define NAND_Ecc_P16o		(1 << 20)
+#define NAND_Ecc_P32o		(1 << 21)
+#define NAND_Ecc_P64o		(1 << 22)
+#define NAND_Ecc_P128o		(1 << 23)
+#define NAND_Ecc_P256o		(1 << 24)
+#define NAND_Ecc_P512o		(1 << 25)
+#define NAND_Ecc_P1024o		(1 << 26)
+#define NAND_Ecc_P2048o		(1 << 27)
+
+#define TF(value)	(value ? 1 : 0)
+
+#define P2048e(a)	(TF(a & NAND_Ecc_P2048e)	<< 0)
+#define P2048o(a)	(TF(a & NAND_Ecc_P2048o)	<< 1)
+#define P1e(a)		(TF(a & NAND_Ecc_P1e)		<< 2)
+#define P1o(a)		(TF(a & NAND_Ecc_P1o)		<< 3)
+#define P2e(a)		(TF(a & NAND_Ecc_P2e)		<< 4)
+#define P2o(a)		(TF(a & NAND_Ecc_P2o)		<< 5)
+#define P4e(a)		(TF(a & NAND_Ecc_P4e)		<< 6)
+#define P4o(a)		(TF(a & NAND_Ecc_P4o)		<< 7)
+
+#define P8e(a)		(TF(a & NAND_Ecc_P8e)		<< 0)
+#define P8o(a)		(TF(a & NAND_Ecc_P8o)		<< 1)
+#define P16e(a)		(TF(a & NAND_Ecc_P16e)		<< 2)
+#define P16o(a)		(TF(a & NAND_Ecc_P16o)		<< 3)
+#define P32e(a)		(TF(a & NAND_Ecc_P32e)		<< 4)
+#define P32o(a)		(TF(a & NAND_Ecc_P32o)		<< 5)
+#define P64e(a)		(TF(a & NAND_Ecc_P64e)		<< 6)
+#define P64o(a)		(TF(a & NAND_Ecc_P64o)		<< 7)
+
+#define P128e(a)	(TF(a & NAND_Ecc_P128e)		<< 0)
+#define P128o(a)	(TF(a & NAND_Ecc_P128o)		<< 1)
+#define P256e(a)	(TF(a & NAND_Ecc_P256e)		<< 2)
+#define P256o(a)	(TF(a & NAND_Ecc_P256o)		<< 3)
+#define P512e(a)	(TF(a & NAND_Ecc_P512e)		<< 4)
+#define P512o(a)	(TF(a & NAND_Ecc_P512o)		<< 5)
+#define P1024e(a)	(TF(a & NAND_Ecc_P1024e)	<< 6)
+#define P1024o(a)	(TF(a & NAND_Ecc_P1024o)	<< 7)
+
+#define P8e_s(a)	(TF(a & NAND_Ecc_P8e)		<< 0)
+#define P8o_s(a)	(TF(a & NAND_Ecc_P8o)		<< 1)
+#define P16e_s(a)	(TF(a & NAND_Ecc_P16e)		<< 2)
+#define P16o_s(a)	(TF(a & NAND_Ecc_P16o)		<< 3)
+#define P1e_s(a)	(TF(a & NAND_Ecc_P1e)		<< 4)
+#define P1o_s(a)	(TF(a & NAND_Ecc_P1o)		<< 5)
+#define P2e_s(a)	(TF(a & NAND_Ecc_P2e)		<< 6)
+#define P2o_s(a)	(TF(a & NAND_Ecc_P2o)		<< 7)
+
+#define P4e_s(a)	(TF(a & NAND_Ecc_P4e)		<< 0)
+#define P4o_s(a)	(TF(a & NAND_Ecc_P4o)		<< 1)
+
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probes[] = { "cmdlinepart", NULL };
+#endif
+
+struct omap_nand_info {
+	struct nand_hw_control		controller;
+	struct omap_nand_platform_data	*pdata;
+	struct mtd_info			mtd;
+	struct mtd_partition		*parts;
+	struct nand_chip		nand;
+	struct platform_device		*pdev;
+
+	int				gpmc_cs;
+	unsigned long			phys_base;
+	void __iomem			*gpmc_cs_baseaddr;
+	void __iomem			*gpmc_baseaddr;
+};
+
+/**
+ * omap_nand_wp - This function enable or disable the Write Protect feature
+ * @mtd: MTD device structure
+ * @mode: WP ON/OFF
+ */
+static void omap_nand_wp(struct mtd_info *mtd, int mode)
+{
+	struct omap_nand_info *info = container_of(mtd,
+						struct omap_nand_info, mtd);
+
+	unsigned long config = __raw_readl(info->gpmc_baseaddr + GPMC_CONFIG);
+
+	if (mode)
+		config &= ~(NAND_WP_BIT);	/* WP is ON */
+	else
+		config |= (NAND_WP_BIT);	/* WP is OFF */
+
+	__raw_writel(config, (info->gpmc_baseaddr + GPMC_CONFIG));
+}
+
+/**
+ * omap_hwcontrol - hardware specific access to control-lines
+ * @mtd: MTD device structure
+ * @cmd: command to device
+ * @ctrl:
+ * NAND_NCE: bit 0 -> don't care
+ * NAND_CLE: bit 1 -> Command Latch
+ * NAND_ALE: bit 2 -> Address Latch
+ *
+ * NOTE: boards may use different bits for these!!
+ */
+static void omap_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct omap_nand_info *info = container_of(mtd,
+					struct omap_nand_info, mtd);
+	switch (ctrl) {
+	case NAND_CTRL_CHANGE | NAND_CTRL_CLE:
+		info->nand.IO_ADDR_W = info->gpmc_cs_baseaddr +
+						GPMC_CS_NAND_COMMAND;
+		info->nand.IO_ADDR_R = info->gpmc_cs_baseaddr +
+						GPMC_CS_NAND_DATA;
+		break;
+
+	case NAND_CTRL_CHANGE | NAND_CTRL_ALE:
+		info->nand.IO_ADDR_W = info->gpmc_cs_baseaddr +
+						GPMC_CS_NAND_ADDRESS;
+		info->nand.IO_ADDR_R = info->gpmc_cs_baseaddr +
+						GPMC_CS_NAND_DATA;
+		break;
+
+	case NAND_CTRL_CHANGE | NAND_NCE:
+		info->nand.IO_ADDR_W = info->gpmc_cs_baseaddr +
+						GPMC_CS_NAND_DATA;
+		info->nand.IO_ADDR_R = info->gpmc_cs_baseaddr +
+						GPMC_CS_NAND_DATA;
+		break;
+	}
+
+	if (cmd != NAND_CMD_NONE)
+		__raw_writeb(cmd, info->nand.IO_ADDR_W);
+}
+
+/**
+ * omap_read_buf16 - read data from NAND controller into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void omap_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
+{
+	struct nand_chip *nand = mtd->priv;
+
+	__raw_readsw(nand->IO_ADDR_R, buf, len / 2);
+}
+
+/**
+ * omap_write_buf16 - write buffer to NAND controller
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len)
+{
+	struct omap_nand_info *info = container_of(mtd,
+						struct omap_nand_info, mtd);
+	u16 *p = (u16 *) buf;
+
+	/* FIXME try bursts of writesw() or DMA ... */
+	len >>= 1;
+
+	while (len--) {
+		writew(*p++, info->nand.IO_ADDR_W);
+
+		while (GPMC_BUF_EMPTY == (readl(info->gpmc_baseaddr +
+						GPMC_STATUS) & GPMC_BUF_FULL))
+			;
+	}
+}
+/**
+ * omap_verify_buf - Verify chip data against buffer
+ * @mtd: MTD device structure
+ * @buf: buffer containing the data to compare
+ * @len: number of bytes to compare
+ */
+static int omap_verify_buf(struct mtd_info *mtd, const u_char * buf, int len)
+{
+	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+							mtd);
+	u16 *p = (u16 *) buf;
+
+	len >>= 1;
+	while (len--) {
+		if (*p++ != cpu_to_le16(readw(info->nand.IO_ADDR_R)))
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_MTD_NAND_OMAP_HWECC
+/**
+ * omap_hwecc_init - Initialize the HW ECC for NAND flash in GPMC controller
+ * @mtd: MTD device structure
+ */
+static void omap_hwecc_init(struct mtd_info *mtd)
+{
+	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+							mtd);
+	struct nand_chip *chip = mtd->priv;
+	unsigned long val = 0x0;
+
+	/* Read from ECC Control Register */
+	val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_CONTROL);
+	/* Clear all ECC | Enable Reg1 */
+	val = ((0x00000001<<8) | 0x00000001);
+	__raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
+
+	/* Read from ECC Size Config Register */
+	val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_SIZE_CONFIG);
+	/* ECCSIZE1=512 | Select eccResultsize[0-3] */
+	val = ((((chip->ecc.size >> 1) - 1) << 22) | (0x0000000F));
+	__raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_SIZE_CONFIG);
+}
+
+/**
+ * gen_true_ecc - This function will generate true ECC value
+ * @ecc_buf: buffer to store ecc code
+ *
+ * This generated true ECC value can be used when correcting
+ * data read from NAND flash memory core
+ */
+static void gen_true_ecc(u8 *ecc_buf)
+{
+	u32 tmp = ecc_buf[0] | (ecc_buf[1] << 16) |
+		((ecc_buf[2] & 0xF0) << 20) | ((ecc_buf[2] & 0x0F) << 8);
+
+	ecc_buf[0] = ~(P64o(tmp) | P64e(tmp) | P32o(tmp) | P32e(tmp) |
+			P16o(tmp) | P16e(tmp) | P8o(tmp) | P8e(tmp));
+	ecc_buf[1] = ~(P1024o(tmp) | P1024e(tmp) | P512o(tmp) | P512e(tmp) |
+			P256o(tmp) | P256e(tmp) | P128o(tmp) | P128e(tmp));
+	ecc_buf[2] = ~(P4o(tmp) | P4e(tmp) | P2o(tmp) | P2e(tmp) | P1o(tmp) |
+			P1e(tmp) | P2048o(tmp) | P2048e(tmp));
+}
+
+/**
+ * omap_compare_ecc - Detect (2 bits) and correct (1 bit) error in data
+ * @ecc_data1:  ecc code from nand spare area
+ * @ecc_data2:  ecc code from hardware register obtained from hardware ecc
+ * @page_data:  page data
+ *
+ * This function compares two ECC's and indicates if there is an error.
+ * If the error can be corrected it will be corrected to the buffer.
+ */
+static int omap_compare_ecc(u8 *ecc_data1,	/* read from NAND memory */
+			    u8 *ecc_data2,	/* read from register */
+			    u8 *page_data)
+{
+	uint	i;
+	u8	tmp0_bit[8], tmp1_bit[8], tmp2_bit[8];
+	u8	comp0_bit[8], comp1_bit[8], comp2_bit[8];
+	u8	ecc_bit[24];
+	u8	ecc_sum = 0;
+	u8	find_bit = 0;
+	uint	find_byte = 0;
+	int	isEccFF;
+
+	isEccFF = ((*(u32 *)ecc_data1 & 0xFFFFFF) == 0xFFFFFF);
+
+	gen_true_ecc(ecc_data1);
+	gen_true_ecc(ecc_data2);
+
+	for (i = 0; i <= 2; i++) {
+		*(ecc_data1 + i) = ~(*(ecc_data1 + i));
+		*(ecc_data2 + i) = ~(*(ecc_data2 + i));
+	}
+
+	for (i = 0; i < 8; i++) {
+		tmp0_bit[i]     = *ecc_data1 % 2;
+		*ecc_data1	= *ecc_data1 / 2;
+	}
+
+	for (i = 0; i < 8; i++) {
+		tmp1_bit[i]	 = *(ecc_data1 + 1) % 2;
+		*(ecc_data1 + 1) = *(ecc_data1 + 1) / 2;
+	}
+
+	for (i = 0; i < 8; i++) {
+		tmp2_bit[i]	 = *(ecc_data1 + 2) % 2;
+		*(ecc_data1 + 2) = *(ecc_data1 + 2) / 2;
+	}
+
+	for (i = 0; i < 8; i++) {
+		comp0_bit[i]     = *ecc_data2 % 2;
+		*ecc_data2       = *ecc_data2 / 2;
+	}
+
+	for (i = 0; i < 8; i++) {
+		comp1_bit[i]     = *(ecc_data2 + 1) % 2;
+		*(ecc_data2 + 1) = *(ecc_data2 + 1) / 2;
+	}
+
+	for (i = 0; i < 8; i++) {
+		comp2_bit[i]     = *(ecc_data2 + 2) % 2;
+		*(ecc_data2 + 2) = *(ecc_data2 + 2) / 2;
+	}
+
+	for (i = 0; i < 6; i++)
+		ecc_bit[i] = tmp2_bit[i + 2] ^ comp2_bit[i + 2];
+
+	for (i = 0; i < 8; i++)
+		ecc_bit[i + 6] = tmp0_bit[i] ^ comp0_bit[i];
+
+	for (i = 0; i < 8; i++)
+		ecc_bit[i + 14] = tmp1_bit[i] ^ comp1_bit[i];
+
+	ecc_bit[22] = tmp2_bit[0] ^ comp2_bit[0];
+	ecc_bit[23] = tmp2_bit[1] ^ comp2_bit[1];
+
+	for (i = 0; i < 24; i++)
+		ecc_sum += ecc_bit[i];
+
+	switch (ecc_sum) {
+	case 0:
+		/* Not reached because this function is not called if
+		 *  ECC values are equal
+		 */
+		return 0;
+
+	case 1:
+		/* Uncorrectable error */
+		DEBUG(MTD_DEBUG_LEVEL0, "ECC UNCORRECTED_ERROR 1\n");
+		return -1;
+
+	case 11:
+		/* UN-Correctable error */
+		DEBUG(MTD_DEBUG_LEVEL0, "ECC UNCORRECTED_ERROR B\n");
+		return -1;
+
+	case 12:
+		/* Correctable error */
+		find_byte = (ecc_bit[23] << 8) +
+			    (ecc_bit[21] << 7) +
+			    (ecc_bit[19] << 6) +
+			    (ecc_bit[17] << 5) +
+			    (ecc_bit[15] << 4) +
+			    (ecc_bit[13] << 3) +
+			    (ecc_bit[11] << 2) +
+			    (ecc_bit[9]  << 1) +
+			    ecc_bit[7];
+
+		find_bit = (ecc_bit[5] << 2) + (ecc_bit[3] << 1) + ecc_bit[1];
+
+		DEBUG(MTD_DEBUG_LEVEL0, "Correcting single bit ECC error at "
+				"offset: %d, bit: %d\n", find_byte, find_bit);
+
+		page_data[find_byte] ^= (1 << find_bit);
+
+		return 0;
+	default:
+		if (isEccFF) {
+			if (ecc_data2[0] == 0 &&
+			    ecc_data2[1] == 0 &&
+			    ecc_data2[2] == 0)
+				return 0;
+		}
+		DEBUG(MTD_DEBUG_LEVEL0, "UNCORRECTED_ERROR default\n");
+		return -1;
+	}
+}
+
+/**
+ * omap_correct_data - Compares the ECC read with HW generated ECC
+ * @mtd: MTD device structure
+ * @dat: page data
+ * @read_ecc: ecc read from nand flash
+ * @calc_ecc: ecc read from HW ECC registers
+ *
+ * Compares the ecc read from nand spare area with ECC registers values
+ * and if ECC's mismached, it will call 'omap_compare_ecc' for error detection
+ * and correction.
+ */
+static int omap_correct_data(struct mtd_info *mtd, u_char *dat,
+				u_char *read_ecc, u_char *calc_ecc)
+{
+	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+							mtd);
+	int blockCnt = 0, i = 0, ret = 0;
+
+	/* Ex NAND_ECC_HW12_2048 */
+	if ((info->nand.ecc.mode == NAND_ECC_HW) &&
+			(info->nand.ecc.size  == 2048))
+		blockCnt = 4;
+	else
+		blockCnt = 1;
+
+	for (i = 0; i < blockCnt; i++) {
+		if (memcmp(read_ecc, calc_ecc, 3) != 0) {
+			ret = omap_compare_ecc(read_ecc, calc_ecc, dat);
+			if (ret < 0)
+				return ret;
+		}
+		read_ecc += 3;
+		calc_ecc += 3;
+		dat      += 512;
+	}
+	return 0;
+}
+
+/**
+ * omap_calcuate_ecc - Generate non-inverted ECC bytes.
+ * @mtd: MTD device structure
+ * @dat: The pointer to data on which ecc is computed
+ * @ecc_code: The ecc_code buffer
+ *
+ * Using noninverted ECC can be considered ugly since writing a blank
+ * page ie. padding will clear the ECC bytes. This is no problem as long
+ * nobody is trying to write data on the seemingly unused page. Reading
+ * an erased page will produce an ECC mismatch between generated and read
+ * ECC bytes that has to be dealt with separately.
+ */
+static int omap_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+				u_char *ecc_code)
+{
+	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+							mtd);
+	unsigned long val = 0x0;
+	unsigned long reg;
+
+	/* Start Reading from HW ECC1_Result = 0x200 */
+	reg = (unsigned long)(info->gpmc_baseaddr + GPMC_ECC1_RESULT);
+	val = __raw_readl(reg);
+	*ecc_code++ = val;          /* P128e, ..., P1e */
+	*ecc_code++ = val >> 16;    /* P128o, ..., P1o */
+	/* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
+	*ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
+	reg += 4;
+
+	return 0;
+}
+
+/**
+ * omap_enable_hwecc - This function enables the hardware ecc functionality
+ * @mtd: MTD device structure
+ * @mode: Read/Write mode
+ */
+static void omap_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+							mtd);
+	struct nand_chip *chip = mtd->priv;
+	unsigned int dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
+	unsigned long val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_CONFIG);
+
+	switch (mode) {
+	case NAND_ECC_READ:
+		__raw_writel(0x101, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
+		/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
+		val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
+		break;
+	case NAND_ECC_READSYN:
+		 __raw_writel(0x100, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
+		/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
+		val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
+		break;
+	case NAND_ECC_WRITE:
+		__raw_writel(0x101, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
+		/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
+		val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
+		break;
+	default:
+		DEBUG(MTD_DEBUG_LEVEL0, "Error: Unrecognized Mode[%d]!\n",
+					mode);
+		break;
+	}
+
+	__raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_CONFIG);
+}
+#endif
+
+/**
+ * omap_wait - wait until the command is done
+ * @mtd: MTD device structure
+ * @chip: NAND Chip structure
+ *
+ * Wait function is called during Program and erase operations and
+ * the way it is called from MTD layer, we should wait till the NAND
+ * chip is ready after the programming/erase operation has completed.
+ *
+ * Erase can take up to 400ms and program up to 20ms according to
+ * general NAND and SmartMedia specs
+ */
+static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip)
+{
+	struct nand_chip *this = mtd->priv;
+	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+							mtd);
+	unsigned long timeo = jiffies;
+	int status, state = this->state;
+
+	if (state == FL_ERASING)
+		timeo += (HZ * 400) / 1000;
+	else
+		timeo += (HZ * 20) / 1000;
+
+	this->IO_ADDR_W = (void *) info->gpmc_cs_baseaddr +
+						GPMC_CS_NAND_COMMAND;
+	this->IO_ADDR_R = (void *) info->gpmc_cs_baseaddr + GPMC_CS_NAND_DATA;
+
+	__raw_writeb(NAND_CMD_STATUS & 0xFF, this->IO_ADDR_W);
+
+	while (time_before(jiffies, timeo)) {
+		status = __raw_readb(this->IO_ADDR_R);
+		if (!(status & 0x40))
+			break;
+	}
+	return status;
+}
+
+/**
+ * omap_dev_ready - calls the platform specific dev_ready function
+ * @mtd: MTD device structure
+ */
+static int omap_dev_ready(struct mtd_info *mtd)
+{
+	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+							mtd);
+	unsigned int val = __raw_readl(info->gpmc_baseaddr + GPMC_IRQ_STATUS);
+
+	if ((val & 0x100) == 0x100) {
+		/* Clear IRQ Interrupt */
+		val |= 0x100;
+		val &= ~(0x0);
+		__raw_writel(val, info->gpmc_baseaddr + GPMC_IRQ_STATUS);
+	} else {
+		unsigned int cnt = 0;
+		while (cnt++ < 0x1FF) {
+			if  ((val & 0x100) == 0x100)
+				return 0;
+			val = __raw_readl(info->gpmc_baseaddr +
+							GPMC_IRQ_STATUS);
+		}
+	}
+
+	return 1;
+}
+
+static int __devinit omap_nand_probe(struct platform_device *pdev)
+{
+	struct omap_nand_info		*info;
+	struct omap_nand_platform_data	*pdata;
+	int				err;
+	unsigned long 			val;
+
+
+	pdata = pdev->dev.platform_data;
+	if (pdata == NULL) {
+		dev_err(&pdev->dev, "platform data missing\n");
+		return -ENODEV;
+	}
+
+	info = kzalloc(sizeof(struct omap_nand_info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, info);
+
+	spin_lock_init(&info->controller.lock);
+	init_waitqueue_head(&info->controller.wq);
+
+	info->pdev = pdev;
+
+	info->gpmc_cs		= pdata->cs;
+	info->gpmc_baseaddr	= pdata->gpmc_baseaddr;
+	info->gpmc_cs_baseaddr	= pdata->gpmc_cs_baseaddr;
+
+	info->mtd.priv		= &info->nand;
+	info->mtd.name		= dev_name(&pdev->dev);
+	info->mtd.owner		= THIS_MODULE;
+
+	err = gpmc_cs_request(info->gpmc_cs, NAND_IO_SIZE, &info->phys_base);
+	if (err < 0) {
+		dev_err(&pdev->dev, "Cannot request GPMC CS\n");
+		goto out_free_info;
+	}
+
+	/* Enable RD PIN Monitoring Reg */
+	if (pdata->dev_ready) {
+		val  = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1);
+		val |= WR_RD_PIN_MONITORING;
+		gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG1, val);
+	}
+
+	val  = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG7);
+	val &= ~(0xf << 8);
+	val |=  (0xc & 0xf) << 8;
+	gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG7, val);
+
+	/* NAND write protect off */
+	omap_nand_wp(&info->mtd, NAND_WP_OFF);
+
+	if (!request_mem_region(info->phys_base, NAND_IO_SIZE,
+				pdev->dev.driver->name)) {
+		err = -EBUSY;
+		goto out_free_cs;
+	}
+
+	info->nand.IO_ADDR_R = ioremap(info->phys_base, NAND_IO_SIZE);
+	if (!info->nand.IO_ADDR_R) {
+		err = -ENOMEM;
+		goto out_release_mem_region;
+	}
+	info->nand.controller = &info->controller;
+
+	info->nand.IO_ADDR_W = info->nand.IO_ADDR_R;
+	info->nand.cmd_ctrl  = omap_hwcontrol;
+
+	/* REVISIT:  only supports 16-bit NAND flash */
+
+	info->nand.read_buf   = omap_read_buf16;
+	info->nand.write_buf  = omap_write_buf16;
+	info->nand.verify_buf = omap_verify_buf;
+
+	/*
+	 * If RDY/BSY line is connected to OMAP then use the omap ready
+	 * funcrtion and the generic nand_wait function which reads the status
+	 * register after monitoring the RDY/BSY line.Otherwise use a standard
+	 * chip delay which is slightly more than tR (AC Timing) of the NAND
+	 * device and read status register until you get a failure or success
+	 */
+	if (pdata->dev_ready) {
+		info->nand.dev_ready = omap_dev_ready;
+		info->nand.chip_delay = 0;
+	} else {
+		info->nand.waitfunc = omap_wait;
+		info->nand.chip_delay = 50;
+	}
+
+	info->nand.options  |= NAND_SKIP_BBTSCAN;
+	if ((gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1) & 0x3000)
+								== 0x1000)
+		info->nand.options  |= NAND_BUSWIDTH_16;
+
+#ifdef CONFIG_MTD_NAND_OMAP_HWECC
+	info->nand.ecc.bytes		= 3;
+	info->nand.ecc.size		= 512;
+	info->nand.ecc.calculate	= omap_calculate_ecc;
+	info->nand.ecc.hwctl		= omap_enable_hwecc;
+	info->nand.ecc.correct		= omap_correct_data;
+	info->nand.ecc.mode		= NAND_ECC_HW;
+
+	/* init HW ECC */
+	omap_hwecc_init(&info->mtd);
+#else
+	info->nand.ecc.mode = NAND_ECC_SOFT;
+#endif
+
+	/* DIP switches on some boards change between 8 and 16 bit
+	 * bus widths for flash.  Try the other width if the first try fails.
+	 */
+	if (nand_scan(&info->mtd, 1)) {
+		info->nand.options ^= NAND_BUSWIDTH_16;
+		if (nand_scan(&info->mtd, 1)) {
+			err = -ENXIO;
+			goto out_release_mem_region;
+		}
+	}
+
+#ifdef CONFIG_MTD_PARTITIONS
+	err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0);
+	if (err > 0)
+		add_mtd_partitions(&info->mtd, info->parts, err);
+	else if (pdata->parts)
+		add_mtd_partitions(&info->mtd, pdata->parts, pdata->nr_parts);
+	else
+#endif
+		add_mtd_device(&info->mtd);
+
+	platform_set_drvdata(pdev, &info->mtd);
+
+	return 0;
+
+out_release_mem_region:
+	release_mem_region(info->phys_base, NAND_IO_SIZE);
+out_free_cs:
+	gpmc_cs_free(info->gpmc_cs);
+out_free_info:
+	kfree(info);
+
+	return err;
+}
+
+static int omap_nand_remove(struct platform_device *pdev)
+{
+	struct mtd_info *mtd = platform_get_drvdata(pdev);
+	struct omap_nand_info *info = mtd->priv;
+
+	platform_set_drvdata(pdev, NULL);
+	/* Release NAND device, its internal structures and partitions */
+	nand_release(&info->mtd);
+	iounmap(info->nand.IO_ADDR_R);
+	kfree(&info->mtd);
+	return 0;
+}
+
+static struct platform_driver omap_nand_driver = {
+	.probe		= omap_nand_probe,
+	.remove		= omap_nand_remove,
+	.driver		= {
+		.name	= DRIVER_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init omap_nand_init(void)
+{
+	printk(KERN_INFO "%s driver initializing\n", DRIVER_NAME);
+	return platform_driver_register(&omap_nand_driver);
+}
+
+static void __exit omap_nand_exit(void)
+{
+	platform_driver_unregister(&omap_nand_driver);
+}
+
+module_init(omap_nand_init);
+module_exit(omap_nand_exit);
+
+MODULE_ALIAS(DRIVER_NAME);
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Glue layer for NAND flash on TI OMAP boards");
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index c2dfd3ea353..7ad972229db 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -47,6 +47,28 @@ static void orion_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl
 	writeb(cmd, nc->IO_ADDR_W + offs);
 }
 
+static void orion_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+	struct nand_chip *chip = mtd->priv;
+	void __iomem *io_base = chip->IO_ADDR_R;
+	uint64_t *buf64;
+	int i = 0;
+
+	while (len && (unsigned long)buf & 7) {
+		*buf++ = readb(io_base);
+		len--;
+	}
+	buf64 = (uint64_t *)buf;
+	while (i < len/8) {
+		uint64_t x;
+		asm ("ldrd\t%0, [%1]" : "=r" (x) : "r" (io_base));
+		buf64[i++] = x;
+	}
+	i *= 8;
+	while (i < len)
+		buf[i++] = readb(io_base);
+}
+
 static int __init orion_nand_probe(struct platform_device *pdev)
 {
 	struct mtd_info *mtd;
@@ -83,6 +105,7 @@ static int __init orion_nand_probe(struct platform_device *pdev)
 	nc->priv = board;
 	nc->IO_ADDR_R = nc->IO_ADDR_W = io_base;
 	nc->cmd_ctrl = orion_nand_cmd_ctrl;
+	nc->read_buf = orion_nand_read_buf;
 	nc->ecc.mode = NAND_ECC_SOFT;
 
 	if (board->chip_delay)
diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c
index 86e1d08eee0..4e16c6f5bdd 100644
--- a/drivers/mtd/nand/plat_nand.c
+++ b/drivers/mtd/nand/plat_nand.c
@@ -61,6 +61,8 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
 	data->chip.cmd_ctrl = pdata->ctrl.cmd_ctrl;
 	data->chip.dev_ready = pdata->ctrl.dev_ready;
 	data->chip.select_chip = pdata->ctrl.select_chip;
+	data->chip.write_buf = pdata->ctrl.write_buf;
+	data->chip.read_buf = pdata->ctrl.read_buf;
 	data->chip.chip_delay = pdata->chip.chip_delay;
 	data->chip.options |= pdata->chip.options;
 
@@ -70,6 +72,13 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, data);
 
+	/* Handle any platform specific setup */
+	if (pdata->ctrl.probe) {
+		res = pdata->ctrl.probe(pdev);
+		if (res)
+			goto out;
+	}
+
 	/* Scan to find existance of the device */
 	if (nand_scan(&data->mtd, 1)) {
 		res = -ENXIO;
@@ -86,6 +95,8 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
 			return 0;
 		}
 	}
+	if (pdata->chip.set_parts)
+		pdata->chip.set_parts(data->mtd.size, &pdata->chip);
 	if (pdata->chip.partitions) {
 		data->parts = pdata->chip.partitions;
 		res = add_mtd_partitions(&data->mtd, data->parts,
@@ -99,6 +110,8 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
 
 	nand_release(&data->mtd);
 out:
+	if (pdata->ctrl.remove)
+		pdata->ctrl.remove(pdev);
 	platform_set_drvdata(pdev, NULL);
 	iounmap(data->io_base);
 	kfree(data);
@@ -111,15 +124,15 @@ out:
 static int __devexit plat_nand_remove(struct platform_device *pdev)
 {
 	struct plat_nand_data *data = platform_get_drvdata(pdev);
-#ifdef CONFIG_MTD_PARTITIONS
 	struct platform_nand_data *pdata = pdev->dev.platform_data;
-#endif
 
 	nand_release(&data->mtd);
 #ifdef CONFIG_MTD_PARTITIONS
 	if (data->parts && data->parts != pdata->chip.partitions)
 		kfree(data->parts);
 #endif
+	if (pdata->ctrl.remove)
+		pdata->ctrl.remove(pdev);
 	iounmap(data->io_base);
 	kfree(data);
 
@@ -128,7 +141,7 @@ static int __devexit plat_nand_remove(struct platform_device *pdev)
 
 static struct platform_driver plat_nand_driver = {
 	.probe		= plat_nand_probe,
-	.remove		= plat_nand_remove,
+	.remove		= __devexit_p(plat_nand_remove),
 	.driver		= {
 		.name	= "gen_nand",
 		.owner	= THIS_MODULE,
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 8e375d5fe23..11dc7e69c4f 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -74,6 +74,14 @@ static struct nand_ecclayout nand_hw_eccoob = {
 
 struct s3c2410_nand_info;
 
+/**
+ * struct s3c2410_nand_mtd - driver MTD structure
+ * @mtd: The MTD instance to pass to the MTD layer.
+ * @chip: The NAND chip information.
+ * @set: The platform information supplied for this set of NAND chips.
+ * @info: Link back to the hardware information.
+ * @scan_res: The result from calling nand_scan_ident().
+*/
 struct s3c2410_nand_mtd {
 	struct mtd_info			mtd;
 	struct nand_chip		chip;
@@ -90,6 +98,21 @@ enum s3c_cpu_type {
 
 /* overview of the s3c2410 nand state */
 
+/**
+ * struct s3c2410_nand_info - NAND controller state.
+ * @mtds: An array of MTD instances on this controoler.
+ * @platform: The platform data for this board.
+ * @device: The platform device we bound to.
+ * @area: The IO area resource that came from request_mem_region().
+ * @clk: The clock resource for this controller.
+ * @regs: The area mapped for the hardware registers described by @area.
+ * @sel_reg: Pointer to the register controlling the NAND selection.
+ * @sel_bit: The bit in @sel_reg to select the NAND chip.
+ * @mtd_count: The number of MTDs created from this controller.
+ * @save_sel: The contents of @sel_reg to be saved over suspend.
+ * @clk_rate: The clock rate from @clk.
+ * @cpu_type: The exact type of this controller.
+ */
 struct s3c2410_nand_info {
 	/* mtd info */
 	struct nand_hw_control		controller;
@@ -145,12 +168,19 @@ static inline int allow_clk_stop(struct s3c2410_nand_info *info)
 
 #define NS_IN_KHZ 1000000
 
+/**
+ * s3c_nand_calc_rate - calculate timing data.
+ * @wanted: The cycle time in nanoseconds.
+ * @clk: The clock rate in kHz.
+ * @max: The maximum divider value.
+ *
+ * Calculate the timing value from the given parameters.
+ */
 static int s3c_nand_calc_rate(int wanted, unsigned long clk, int max)
 {
 	int result;
 
-	result = (wanted * clk) / NS_IN_KHZ;
-	result++;
+	result = DIV_ROUND_UP((wanted * clk), NS_IN_KHZ);
 
 	pr_debug("result %d from %ld, %d\n", result, clk, wanted);
 
@@ -169,13 +199,21 @@ static int s3c_nand_calc_rate(int wanted, unsigned long clk, int max)
 
 /* controller setup */
 
+/**
+ * s3c2410_nand_setrate - setup controller timing information.
+ * @info: The controller instance.
+ *
+ * Given the information supplied by the platform, calculate and set
+ * the necessary timing registers in the hardware to generate the
+ * necessary timing cycles to the hardware.
+ */
 static int s3c2410_nand_setrate(struct s3c2410_nand_info *info)
 {
 	struct s3c2410_platform_nand *plat = info->platform;
 	int tacls_max = (info->cpu_type == TYPE_S3C2412) ? 8 : 4;
 	int tacls, twrph0, twrph1;
 	unsigned long clkrate = clk_get_rate(info->clk);
-	unsigned long set, cfg, mask;
+	unsigned long uninitialized_var(set), cfg, uninitialized_var(mask);
 	unsigned long flags;
 
 	/* calculate the timing information for the controller */
@@ -215,9 +253,9 @@ static int s3c2410_nand_setrate(struct s3c2410_nand_info *info)
 
 	case TYPE_S3C2440:
 	case TYPE_S3C2412:
-		mask = (S3C2410_NFCONF_TACLS(tacls_max - 1) |
-			S3C2410_NFCONF_TWRPH0(7) |
-			S3C2410_NFCONF_TWRPH1(7));
+		mask = (S3C2440_NFCONF_TACLS(tacls_max - 1) |
+			S3C2440_NFCONF_TWRPH0(7) |
+			S3C2440_NFCONF_TWRPH1(7));
 
 		set = S3C2440_NFCONF_TACLS(tacls - 1);
 		set |= S3C2440_NFCONF_TWRPH0(twrph0 - 1);
@@ -225,14 +263,9 @@ static int s3c2410_nand_setrate(struct s3c2410_nand_info *info)
 		break;
 
 	default:
-		/* keep compiler happy */
-		mask = 0;
-		set = 0;
 		BUG();
 	}
 
-	dev_dbg(info->device, "NF_CONF is 0x%lx\n", cfg);
-
 	local_irq_save(flags);
 
 	cfg = readl(info->regs + S3C2410_NFCONF);
@@ -242,9 +275,18 @@ static int s3c2410_nand_setrate(struct s3c2410_nand_info *info)
 
 	local_irq_restore(flags);
 
+	dev_dbg(info->device, "NF_CONF is 0x%lx\n", cfg);
+
 	return 0;
 }
 
+/**
+ * s3c2410_nand_inithw - basic hardware initialisation
+ * @info: The hardware state.
+ *
+ * Do the basic initialisation of the hardware, using s3c2410_nand_setrate()
+ * to setup the hardware access speeds and set the controller to be enabled.
+*/
 static int s3c2410_nand_inithw(struct s3c2410_nand_info *info)
 {
 	int ret;
@@ -268,8 +310,19 @@ static int s3c2410_nand_inithw(struct s3c2410_nand_info *info)
 	return 0;
 }
 
-/* select chip */
-
+/**
+ * s3c2410_nand_select_chip - select the given nand chip
+ * @mtd: The MTD instance for this chip.
+ * @chip: The chip number.
+ *
+ * This is called by the MTD layer to either select a given chip for the
+ * @mtd instance, or to indicate that the access has finished and the
+ * chip can be de-selected.
+ *
+ * The routine ensures that the nFCE line is correctly setup, and any
+ * platform specific selection code is called to route nFCE to the specific
+ * chip.
+ */
 static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip)
 {
 	struct s3c2410_nand_info *info;
@@ -530,7 +583,16 @@ static void s3c2410_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 static void s3c2440_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 {
 	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
-	readsl(info->regs + S3C2440_NFDATA, buf, len / 4);
+
+	readsl(info->regs + S3C2440_NFDATA, buf, len >> 2);
+
+	/* cleanup if we've got less than a word to do */
+	if (len & 3) {
+		buf += len & ~3;
+
+		for (; len & 3; len--)
+			*buf++ = readb(info->regs + S3C2440_NFDATA);
+	}
 }
 
 static void s3c2410_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
@@ -542,7 +604,16 @@ static void s3c2410_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int
 static void s3c2440_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
 {
 	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
-	writesl(info->regs + S3C2440_NFDATA, buf, len / 4);
+
+	writesl(info->regs + S3C2440_NFDATA, buf, len >> 2);
+
+	/* cleanup any fractional write */
+	if (len & 3) {
+		buf += len & ~3;
+
+		for (; len & 3; len--, buf++)
+			writeb(*buf, info->regs + S3C2440_NFDATA);
+	}
 }
 
 /* cpufreq driver support */
@@ -593,7 +664,7 @@ static inline void s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *inf
 
 /* device management functions */
 
-static int s3c2410_nand_remove(struct platform_device *pdev)
+static int s3c24xx_nand_remove(struct platform_device *pdev)
 {
 	struct s3c2410_nand_info *info = to_nand_info(pdev);
 
@@ -645,17 +716,31 @@ static int s3c2410_nand_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_MTD_PARTITIONS
+const char *part_probes[] = { "cmdlinepart", NULL };
 static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info,
 				      struct s3c2410_nand_mtd *mtd,
 				      struct s3c2410_nand_set *set)
 {
+	struct mtd_partition *part_info;
+	int nr_part = 0;
+
 	if (set == NULL)
 		return add_mtd_device(&mtd->mtd);
 
-	if (set->nr_partitions > 0 && set->partitions != NULL) {
-		return add_mtd_partitions(&mtd->mtd, set->partitions, set->nr_partitions);
+	if (set->nr_partitions == 0) {
+		mtd->mtd.name = set->name;
+		nr_part = parse_mtd_partitions(&mtd->mtd, part_probes,
+						&part_info, 0);
+	} else {
+		if (set->nr_partitions > 0 && set->partitions != NULL) {
+			nr_part = set->nr_partitions;
+			part_info = set->partitions;
+		}
 	}
 
+	if (nr_part > 0 && part_info)
+		return add_mtd_partitions(&mtd->mtd, part_info, nr_part);
+
 	return add_mtd_device(&mtd->mtd);
 }
 #else
@@ -667,11 +752,16 @@ static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info,
 }
 #endif
 
-/* s3c2410_nand_init_chip
+/**
+ * s3c2410_nand_init_chip - initialise a single instance of an chip
+ * @info: The base NAND controller the chip is on.
+ * @nmtd: The new controller MTD instance to fill in.
+ * @set: The information passed from the board specific platform data.
  *
- * init a single instance of an chip
-*/
-
+ * Initialise the given @nmtd from the information in @info and @set. This
+ * readies the structure for use with the MTD layer functions by ensuring
+ * all pointers are setup and the necessary control routines selected.
+ */
 static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
 				   struct s3c2410_nand_mtd *nmtd,
 				   struct s3c2410_nand_set *set)
@@ -757,14 +847,40 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
 
 	if (set->disable_ecc)
 		chip->ecc.mode	= NAND_ECC_NONE;
+
+	switch (chip->ecc.mode) {
+	case NAND_ECC_NONE:
+		dev_info(info->device, "NAND ECC disabled\n");
+		break;
+	case NAND_ECC_SOFT:
+		dev_info(info->device, "NAND soft ECC\n");
+		break;
+	case NAND_ECC_HW:
+		dev_info(info->device, "NAND hardware ECC\n");
+		break;
+	default:
+		dev_info(info->device, "NAND ECC UNKNOWN\n");
+		break;
+	}
+
+	/* If you use u-boot BBT creation code, specifying this flag will
+	 * let the kernel fish out the BBT from the NAND, and also skip the
+	 * full NAND scan that can take 1/2s or so. Little things... */
+	if (set->flash_bbt)
+		chip->options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN;
 }
 
-/* s3c2410_nand_update_chip
+/**
+ * s3c2410_nand_update_chip - post probe update
+ * @info: The controller instance.
+ * @nmtd: The driver version of the MTD instance.
  *
- * post-probe chip update, to change any items, such as the
- * layout for large page nand
- */
-
+ * This routine is called after the chip probe has succesfully completed
+ * and the relevant per-chip information updated. This call ensure that
+ * we update the internal state accordingly.
+ *
+ * The internal state is currently limited to the ECC state information.
+*/
 static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
 				     struct s3c2410_nand_mtd *nmtd)
 {
@@ -773,33 +889,33 @@ static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
 	dev_dbg(info->device, "chip %p => page shift %d\n",
 		chip, chip->page_shift);
 
-	if (hardware_ecc) {
+	if (chip->ecc.mode != NAND_ECC_HW)
+		return;
+
 		/* change the behaviour depending on wether we are using
 		 * the large or small page nand device */
 
-		if (chip->page_shift > 10) {
-			chip->ecc.size	    = 256;
-			chip->ecc.bytes	    = 3;
-		} else {
-			chip->ecc.size	    = 512;
-			chip->ecc.bytes	    = 3;
-			chip->ecc.layout    = &nand_hw_eccoob;
-		}
+	if (chip->page_shift > 10) {
+		chip->ecc.size	    = 256;
+		chip->ecc.bytes	    = 3;
+	} else {
+		chip->ecc.size	    = 512;
+		chip->ecc.bytes	    = 3;
+		chip->ecc.layout    = &nand_hw_eccoob;
 	}
 }
 
-/* s3c2410_nand_probe
+/* s3c24xx_nand_probe
  *
  * called by device layer when it finds a device matching
  * one our driver can handled. This code checks to see if
  * it can allocate all necessary resources then calls the
  * nand layer to look for devices
 */
-
-static int s3c24xx_nand_probe(struct platform_device *pdev,
-			      enum s3c_cpu_type cpu_type)
+static int s3c24xx_nand_probe(struct platform_device *pdev)
 {
 	struct s3c2410_platform_nand *plat = to_nand_plat(pdev);
+	enum s3c_cpu_type cpu_type; 
 	struct s3c2410_nand_info *info;
 	struct s3c2410_nand_mtd *nmtd;
 	struct s3c2410_nand_set *sets;
@@ -809,6 +925,8 @@ static int s3c24xx_nand_probe(struct platform_device *pdev,
 	int nr_sets;
 	int setno;
 
+	cpu_type = platform_get_device_id(pdev)->driver_data;
+
 	pr_debug("s3c2410_nand_probe(%p)\n", pdev);
 
 	info = kmalloc(sizeof(*info), GFP_KERNEL);
@@ -922,7 +1040,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev,
 	return 0;
 
  exit_error:
-	s3c2410_nand_remove(pdev);
+	s3c24xx_nand_remove(pdev);
 
 	if (err == 0)
 		err = -EINVAL;
@@ -983,50 +1101,33 @@ static int s3c24xx_nand_resume(struct platform_device *dev)
 
 /* driver device registration */
 
-static int s3c2410_nand_probe(struct platform_device *dev)
-{
-	return s3c24xx_nand_probe(dev, TYPE_S3C2410);
-}
-
-static int s3c2440_nand_probe(struct platform_device *dev)
-{
-	return s3c24xx_nand_probe(dev, TYPE_S3C2440);
-}
-
-static int s3c2412_nand_probe(struct platform_device *dev)
-{
-	return s3c24xx_nand_probe(dev, TYPE_S3C2412);
-}
-
-static struct platform_driver s3c2410_nand_driver = {
-	.probe		= s3c2410_nand_probe,
-	.remove		= s3c2410_nand_remove,
-	.suspend	= s3c24xx_nand_suspend,
-	.resume		= s3c24xx_nand_resume,
-	.driver		= {
-		.name	= "s3c2410-nand",
-		.owner	= THIS_MODULE,
+static struct platform_device_id s3c24xx_driver_ids[] = {
+	{
+		.name		= "s3c2410-nand",
+		.driver_data	= TYPE_S3C2410,
+	}, {
+		.name		= "s3c2440-nand",
+		.driver_data	= TYPE_S3C2440,
+	}, {
+		.name		= "s3c2412-nand",
+		.driver_data	= TYPE_S3C2412,
+	}, {
+		.name		= "s3c6400-nand",
+		.driver_data	= TYPE_S3C2412, /* compatible with 2412 */
 	},
+	{ }
 };
 
-static struct platform_driver s3c2440_nand_driver = {
-	.probe		= s3c2440_nand_probe,
-	.remove		= s3c2410_nand_remove,
-	.suspend	= s3c24xx_nand_suspend,
-	.resume		= s3c24xx_nand_resume,
-	.driver		= {
-		.name	= "s3c2440-nand",
-		.owner	= THIS_MODULE,
-	},
-};
+MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
 
-static struct platform_driver s3c2412_nand_driver = {
-	.probe		= s3c2412_nand_probe,
-	.remove		= s3c2410_nand_remove,
+static struct platform_driver s3c24xx_nand_driver = {
+	.probe		= s3c24xx_nand_probe,
+	.remove		= s3c24xx_nand_remove,
 	.suspend	= s3c24xx_nand_suspend,
 	.resume		= s3c24xx_nand_resume,
+	.id_table	= s3c24xx_driver_ids,
 	.driver		= {
-		.name	= "s3c2412-nand",
+		.name	= "s3c24xx-nand",
 		.owner	= THIS_MODULE,
 	},
 };
@@ -1035,16 +1136,12 @@ static int __init s3c2410_nand_init(void)
 {
 	printk("S3C24XX NAND Driver, (c) 2004 Simtec Electronics\n");
 
-	platform_driver_register(&s3c2412_nand_driver);
-	platform_driver_register(&s3c2440_nand_driver);
-	return platform_driver_register(&s3c2410_nand_driver);
+	return platform_driver_register(&s3c24xx_nand_driver);
 }
 
 static void __exit s3c2410_nand_exit(void)
 {
-	platform_driver_unregister(&s3c2412_nand_driver);
-	platform_driver_unregister(&s3c2440_nand_driver);
-	platform_driver_unregister(&s3c2410_nand_driver);
+	platform_driver_unregister(&s3c24xx_nand_driver);
 }
 
 module_init(s3c2410_nand_init);
@@ -1053,6 +1150,3 @@ module_exit(s3c2410_nand_exit);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
 MODULE_DESCRIPTION("S3C24XX MTD NAND driver");
-MODULE_ALIAS("platform:s3c2410-nand");
-MODULE_ALIAS("platform:s3c2412-nand");
-MODULE_ALIAS("platform:s3c2440-nand");
diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c
index 81247926489..488088eff2c 100644
--- a/drivers/mtd/nand/txx9ndfmc.c
+++ b/drivers/mtd/nand/txx9ndfmc.c
@@ -64,7 +64,7 @@ struct txx9ndfmc_priv {
 	struct nand_chip chip;
 	struct mtd_info mtd;
 	int cs;
-	char mtdname[BUS_ID_SIZE + 2];
+	const char *mtdname;
 };
 
 #define MAX_TXX9NDFMC_DEV	4
@@ -334,16 +334,23 @@ static int __init txx9ndfmc_probe(struct platform_device *dev)
 
 		if (plat->ch_mask != 1) {
 			txx9_priv->cs = i;
-			sprintf(txx9_priv->mtdname, "%s.%u",
-				dev_name(&dev->dev), i);
+			txx9_priv->mtdname = kasprintf(GFP_KERNEL, "%s.%u",
+						       dev_name(&dev->dev), i);
 		} else {
 			txx9_priv->cs = -1;
-			strcpy(txx9_priv->mtdname, dev_name(&dev->dev));
+			txx9_priv->mtdname = kstrdup(dev_name(&dev->dev),
+						     GFP_KERNEL);
+		}
+		if (!txx9_priv->mtdname) {
+			kfree(txx9_priv);
+			dev_err(&dev->dev, "Unable to allocate MTD name.\n");
+			continue;
 		}
 		if (plat->wide_mask & (1 << i))
 			chip->options |= NAND_BUSWIDTH_16;
 
 		if (nand_scan(mtd, 1)) {
+			kfree(txx9_priv->mtdname);
 			kfree(txx9_priv);
 			continue;
 		}
@@ -385,6 +392,7 @@ static int __exit txx9ndfmc_remove(struct platform_device *dev)
 		kfree(drvdata->parts[i]);
 #endif
 		del_mtd_device(mtd);
+		kfree(txx9_priv->mtdname);
 		kfree(txx9_priv);
 	}
 	return 0;
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 6391e3dc800..38d656b9b2e 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -565,7 +565,7 @@ int omap2_onenand_rephase(void)
 				      NULL, __adjust_timing);
 }
 
-static void __devexit omap2_onenand_shutdown(struct platform_device *pdev)
+static void omap2_onenand_shutdown(struct platform_device *pdev)
 {
 	struct omap2_onenand *c = dev_get_drvdata(&pdev->dev);
 
@@ -777,7 +777,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev)
 
 static struct platform_driver omap2_onenand_driver = {
 	.probe		= omap2_onenand_probe,
-	.remove		= omap2_onenand_remove,
+	.remove		= __devexit_p(omap2_onenand_remove),
 	.shutdown	= omap2_onenand_shutdown,
 	.driver		= {
 		.name	= DRIVER_NAME,
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 30d6999e5f9..6e829095ea9 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -9,6 +9,10 @@
  *	auto-placement support, read-while load support, various fixes
  *	Copyright (C) Nokia Corporation, 2007
  *
+ *	Vishak G <vishak.g at samsung.com>, Rohit Hagargundgi <h.rohit at samsung.com>
+ *	Flex-OneNAND support
+ *	Copyright (C) Samsung Electronics, 2008
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -16,6 +20,7 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/moduleparam.h>
 #include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/delay.h>
@@ -27,6 +32,38 @@
 
 #include <asm/io.h>
 
+/* Default Flex-OneNAND boundary and lock respectively */
+static int flex_bdry[MAX_DIES * 2] = { -1, 0, -1, 0 };
+
+module_param_array(flex_bdry, int, NULL, 0400);
+MODULE_PARM_DESC(flex_bdry,	"SLC Boundary information for Flex-OneNAND"
+				"Syntax:flex_bdry=DIE_BDRY,LOCK,..."
+				"DIE_BDRY: SLC boundary of the die"
+				"LOCK: Locking information for SLC boundary"
+				"    : 0->Set boundary in unlocked status"
+				"    : 1->Set boundary in locked status");
+
+/**
+ *  onenand_oob_128 - oob info for Flex-Onenand with 4KB page
+ *  For now, we expose only 64 out of 80 ecc bytes
+ */
+static struct nand_ecclayout onenand_oob_128 = {
+	.eccbytes	= 64,
+	.eccpos		= {
+		6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
+		22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+		38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
+		54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
+		70, 71, 72, 73, 74, 75, 76, 77, 78, 79,
+		86, 87, 88, 89, 90, 91, 92, 93, 94, 95,
+		102, 103, 104, 105
+		},
+	.oobfree	= {
+		{2, 4}, {18, 4}, {34, 4}, {50, 4},
+		{66, 4}, {82, 4}, {98, 4}, {114, 4}
+	}
+};
+
 /**
  * onenand_oob_64 - oob info for large (2KB) page
  */
@@ -65,6 +102,14 @@ static const unsigned char ffchars[] = {
 	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,	/* 48 */
 	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,	/* 64 */
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,	/* 80 */
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,	/* 96 */
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,	/* 112 */
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,	/* 128 */
 };
 
 /**
@@ -171,6 +216,70 @@ static int onenand_buffer_address(int dataram1, int sectors, int count)
 }
 
 /**
+ * flexonenand_block- For given address return block number
+ * @param this         - OneNAND device structure
+ * @param addr		- Address for which block number is needed
+ */
+static unsigned flexonenand_block(struct onenand_chip *this, loff_t addr)
+{
+	unsigned boundary, blk, die = 0;
+
+	if (ONENAND_IS_DDP(this) && addr >= this->diesize[0]) {
+		die = 1;
+		addr -= this->diesize[0];
+	}
+
+	boundary = this->boundary[die];
+
+	blk = addr >> (this->erase_shift - 1);
+	if (blk > boundary)
+		blk = (blk + boundary + 1) >> 1;
+
+	blk += die ? this->density_mask : 0;
+	return blk;
+}
+
+inline unsigned onenand_block(struct onenand_chip *this, loff_t addr)
+{
+	if (!FLEXONENAND(this))
+		return addr >> this->erase_shift;
+	return flexonenand_block(this, addr);
+}
+
+/**
+ * flexonenand_addr - Return address of the block
+ * @this:		OneNAND device structure
+ * @block:		Block number on Flex-OneNAND
+ *
+ * Return address of the block
+ */
+static loff_t flexonenand_addr(struct onenand_chip *this, int block)
+{
+	loff_t ofs = 0;
+	int die = 0, boundary;
+
+	if (ONENAND_IS_DDP(this) && block >= this->density_mask) {
+		block -= this->density_mask;
+		die = 1;
+		ofs = this->diesize[0];
+	}
+
+	boundary = this->boundary[die];
+	ofs += (loff_t)block << (this->erase_shift - 1);
+	if (block > (boundary + 1))
+		ofs += (loff_t)(block - boundary - 1) << (this->erase_shift - 1);
+	return ofs;
+}
+
+loff_t onenand_addr(struct onenand_chip *this, int block)
+{
+	if (!FLEXONENAND(this))
+		return (loff_t)block << this->erase_shift;
+	return flexonenand_addr(this, block);
+}
+EXPORT_SYMBOL(onenand_addr);
+
+/**
  * onenand_get_density - [DEFAULT] Get OneNAND density
  * @param dev_id	OneNAND device ID
  *
@@ -183,6 +292,22 @@ static inline int onenand_get_density(int dev_id)
 }
 
 /**
+ * flexonenand_region - [Flex-OneNAND] Return erase region of addr
+ * @param mtd		MTD device structure
+ * @param addr		address whose erase region needs to be identified
+ */
+int flexonenand_region(struct mtd_info *mtd, loff_t addr)
+{
+	int i;
+
+	for (i = 0; i < mtd->numeraseregions; i++)
+		if (addr < mtd->eraseregions[i].offset)
+			break;
+	return i - 1;
+}
+EXPORT_SYMBOL(flexonenand_region);
+
+/**
  * onenand_command - [DEFAULT] Send command to OneNAND device
  * @param mtd		MTD device structure
  * @param cmd		the command to be sent
@@ -207,16 +332,28 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le
 		page = -1;
 		break;
 
+	case FLEXONENAND_CMD_PI_ACCESS:
+		/* addr contains die index */
+		block = addr * this->density_mask;
+		page = -1;
+		break;
+
 	case ONENAND_CMD_ERASE:
 	case ONENAND_CMD_BUFFERRAM:
 	case ONENAND_CMD_OTP_ACCESS:
-		block = (int) (addr >> this->erase_shift);
+		block = onenand_block(this, addr);
 		page = -1;
 		break;
 
+	case FLEXONENAND_CMD_READ_PI:
+		cmd = ONENAND_CMD_READ;
+		block = addr * this->density_mask;
+		page = 0;
+		break;
+
 	default:
-		block = (int) (addr >> this->erase_shift);
-		page = (int) (addr >> this->page_shift);
+		block = onenand_block(this, addr);
+		page = (int) (addr - onenand_addr(this, block)) >> this->page_shift;
 
 		if (ONENAND_IS_2PLANE(this)) {
 			/* Make the even block number */
@@ -236,7 +373,7 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le
 		value = onenand_bufferram_address(this, block);
 		this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
 
-		if (ONENAND_IS_2PLANE(this))
+		if (ONENAND_IS_MLC(this) || ONENAND_IS_2PLANE(this))
 			/* It is always BufferRAM0 */
 			ONENAND_SET_BUFFERRAM0(this);
 		else
@@ -258,13 +395,18 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le
 
 	if (page != -1) {
 		/* Now we use page size operation */
-		int sectors = 4, count = 4;
+		int sectors = 0, count = 0;
 		int dataram;
 
 		switch (cmd) {
+		case FLEXONENAND_CMD_RECOVER_LSB:
 		case ONENAND_CMD_READ:
 		case ONENAND_CMD_READOOB:
-			dataram = ONENAND_SET_NEXT_BUFFERRAM(this);
+			if (ONENAND_IS_MLC(this))
+				/* It is always BufferRAM0 */
+				dataram = ONENAND_SET_BUFFERRAM0(this);
+			else
+				dataram = ONENAND_SET_NEXT_BUFFERRAM(this);
 			break;
 
 		default:
@@ -293,6 +435,30 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le
 }
 
 /**
+ * onenand_read_ecc - return ecc status
+ * @param this		onenand chip structure
+ */
+static inline int onenand_read_ecc(struct onenand_chip *this)
+{
+	int ecc, i, result = 0;
+
+	if (!FLEXONENAND(this))
+		return this->read_word(this->base + ONENAND_REG_ECC_STATUS);
+
+	for (i = 0; i < 4; i++) {
+		ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS + i);
+		if (likely(!ecc))
+			continue;
+		if (ecc & FLEXONENAND_UNCORRECTABLE_ERROR)
+			return ONENAND_ECC_2BIT_ALL;
+		else
+			result = ONENAND_ECC_1BIT_ALL;
+	}
+
+	return result;
+}
+
+/**
  * onenand_wait - [DEFAULT] wait until the command is done
  * @param mtd		MTD device structure
  * @param state		state to select the max. timeout value
@@ -331,14 +497,14 @@ static int onenand_wait(struct mtd_info *mtd, int state)
 	 * power off recovery (POR) test, it should read ECC status first
 	 */
 	if (interrupt & ONENAND_INT_READ) {
-		int ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
+		int ecc = onenand_read_ecc(this);
 		if (ecc) {
 			if (ecc & ONENAND_ECC_2BIT_ALL) {
 				printk(KERN_ERR "onenand_wait: ECC error = 0x%04x\n", ecc);
 				mtd->ecc_stats.failed++;
 				return -EBADMSG;
 			} else if (ecc & ONENAND_ECC_1BIT_ALL) {
-				printk(KERN_INFO "onenand_wait: correctable ECC error = 0x%04x\n", ecc);
+				printk(KERN_DEBUG "onenand_wait: correctable ECC error = 0x%04x\n", ecc);
 				mtd->ecc_stats.corrected++;
 			}
 		}
@@ -656,7 +822,7 @@ static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr)
 
 	if (found && ONENAND_IS_DDP(this)) {
 		/* Select DataRAM for DDP */
-		int block = (int) (addr >> this->erase_shift);
+		int block = onenand_block(this, addr);
 		int value = onenand_bufferram_address(this, block);
 		this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
 	}
@@ -816,6 +982,149 @@ static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf, int col
 }
 
 /**
+ * onenand_recover_lsb - [Flex-OneNAND] Recover LSB page data
+ * @param mtd		MTD device structure
+ * @param addr		address to recover
+ * @param status	return value from onenand_wait / onenand_bbt_wait
+ *
+ * MLC NAND Flash cell has paired pages - LSB page and MSB page. LSB page has
+ * lower page address and MSB page has higher page address in paired pages.
+ * If power off occurs during MSB page program, the paired LSB page data can
+ * become corrupt. LSB page recovery read is a way to read LSB page though page
+ * data are corrupted. When uncorrectable error occurs as a result of LSB page
+ * read after power up, issue LSB page recovery read.
+ */
+static int onenand_recover_lsb(struct mtd_info *mtd, loff_t addr, int status)
+{
+	struct onenand_chip *this = mtd->priv;
+	int i;
+
+	/* Recovery is only for Flex-OneNAND */
+	if (!FLEXONENAND(this))
+		return status;
+
+	/* check if we failed due to uncorrectable error */
+	if (status != -EBADMSG && status != ONENAND_BBT_READ_ECC_ERROR)
+		return status;
+
+	/* check if address lies in MLC region */
+	i = flexonenand_region(mtd, addr);
+	if (mtd->eraseregions[i].erasesize < (1 << this->erase_shift))
+		return status;
+
+	/* We are attempting to reread, so decrement stats.failed
+	 * which was incremented by onenand_wait due to read failure
+	 */
+	printk(KERN_INFO "onenand_recover_lsb: Attempting to recover from uncorrectable read\n");
+	mtd->ecc_stats.failed--;
+
+	/* Issue the LSB page recovery command */
+	this->command(mtd, FLEXONENAND_CMD_RECOVER_LSB, addr, this->writesize);
+	return this->wait(mtd, FL_READING);
+}
+
+/**
+ * onenand_mlc_read_ops_nolock - MLC OneNAND read main and/or out-of-band
+ * @param mtd		MTD device structure
+ * @param from		offset to read from
+ * @param ops:		oob operation description structure
+ *
+ * MLC OneNAND / Flex-OneNAND has 4KB page size and 4KB dataram.
+ * So, read-while-load is not present.
+ */
+static int onenand_mlc_read_ops_nolock(struct mtd_info *mtd, loff_t from,
+				struct mtd_oob_ops *ops)
+{
+	struct onenand_chip *this = mtd->priv;
+	struct mtd_ecc_stats stats;
+	size_t len = ops->len;
+	size_t ooblen = ops->ooblen;
+	u_char *buf = ops->datbuf;
+	u_char *oobbuf = ops->oobbuf;
+	int read = 0, column, thislen;
+	int oobread = 0, oobcolumn, thisooblen, oobsize;
+	int ret = 0;
+	int writesize = this->writesize;
+
+	DEBUG(MTD_DEBUG_LEVEL3, "onenand_mlc_read_ops_nolock: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
+
+	if (ops->mode == MTD_OOB_AUTO)
+		oobsize = this->ecclayout->oobavail;
+	else
+		oobsize = mtd->oobsize;
+
+	oobcolumn = from & (mtd->oobsize - 1);
+
+	/* Do not allow reads past end of device */
+	if (from + len > mtd->size) {
+		printk(KERN_ERR "onenand_mlc_read_ops_nolock: Attempt read beyond end of device\n");
+		ops->retlen = 0;
+		ops->oobretlen = 0;
+		return -EINVAL;
+	}
+
+	stats = mtd->ecc_stats;
+
+	while (read < len) {
+		cond_resched();
+
+		thislen = min_t(int, writesize, len - read);
+
+		column = from & (writesize - 1);
+		if (column + thislen > writesize)
+			thislen = writesize - column;
+
+		if (!onenand_check_bufferram(mtd, from)) {
+			this->command(mtd, ONENAND_CMD_READ, from, writesize);
+
+			ret = this->wait(mtd, FL_READING);
+			if (unlikely(ret))
+				ret = onenand_recover_lsb(mtd, from, ret);
+			onenand_update_bufferram(mtd, from, !ret);
+			if (ret == -EBADMSG)
+				ret = 0;
+		}
+
+		this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, thislen);
+		if (oobbuf) {
+			thisooblen = oobsize - oobcolumn;
+			thisooblen = min_t(int, thisooblen, ooblen - oobread);
+
+			if (ops->mode == MTD_OOB_AUTO)
+				onenand_transfer_auto_oob(mtd, oobbuf, oobcolumn, thisooblen);
+			else
+				this->read_bufferram(mtd, ONENAND_SPARERAM, oobbuf, oobcolumn, thisooblen);
+			oobread += thisooblen;
+			oobbuf += thisooblen;
+			oobcolumn = 0;
+		}
+
+		read += thislen;
+		if (read == len)
+			break;
+
+		from += thislen;
+		buf += thislen;
+	}
+
+	/*
+	 * Return success, if no ECC failures, else -EBADMSG
+	 * fs driver will take care of that, because
+	 * retlen == desired len and result == -EBADMSG
+	 */
+	ops->retlen = read;
+	ops->oobretlen = oobread;
+
+	if (ret)
+		return ret;
+
+	if (mtd->ecc_stats.failed - stats.failed)
+		return -EBADMSG;
+
+	return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
+}
+
+/**
  * onenand_read_ops_nolock - [OneNAND Interface] OneNAND read main and/or out-of-band
  * @param mtd		MTD device structure
  * @param from		offset to read from
@@ -962,7 +1271,7 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from,
 	size_t len = ops->ooblen;
 	mtd_oob_mode_t mode = ops->mode;
 	u_char *buf = ops->oobbuf;
-	int ret = 0;
+	int ret = 0, readcmd;
 
 	from += ops->ooboffs;
 
@@ -993,17 +1302,22 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from,
 
 	stats = mtd->ecc_stats;
 
+	readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB;
+
 	while (read < len) {
 		cond_resched();
 
 		thislen = oobsize - column;
 		thislen = min_t(int, thislen, len);
 
-		this->command(mtd, ONENAND_CMD_READOOB, from, mtd->oobsize);
+		this->command(mtd, readcmd, from, mtd->oobsize);
 
 		onenand_update_bufferram(mtd, from, 0);
 
 		ret = this->wait(mtd, FL_READING);
+		if (unlikely(ret))
+			ret = onenand_recover_lsb(mtd, from, ret);
+
 		if (ret && ret != -EBADMSG) {
 			printk(KERN_ERR "onenand_read_oob_nolock: read failed = 0x%x\n", ret);
 			break;
@@ -1053,6 +1367,7 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from,
 static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
 	size_t *retlen, u_char *buf)
 {
+	struct onenand_chip *this = mtd->priv;
 	struct mtd_oob_ops ops = {
 		.len	= len,
 		.ooblen	= 0,
@@ -1062,7 +1377,9 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
 	int ret;
 
 	onenand_get_device(mtd, FL_READING);
-	ret = onenand_read_ops_nolock(mtd, from, &ops);
+	ret = ONENAND_IS_MLC(this) ?
+		onenand_mlc_read_ops_nolock(mtd, from, &ops) :
+		onenand_read_ops_nolock(mtd, from, &ops);
 	onenand_release_device(mtd);
 
 	*retlen = ops.retlen;
@@ -1080,6 +1397,7 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
 static int onenand_read_oob(struct mtd_info *mtd, loff_t from,
 			    struct mtd_oob_ops *ops)
 {
+	struct onenand_chip *this = mtd->priv;
 	int ret;
 
 	switch (ops->mode) {
@@ -1094,7 +1412,9 @@ static int onenand_read_oob(struct mtd_info *mtd, loff_t from,
 
 	onenand_get_device(mtd, FL_READING);
 	if (ops->datbuf)
-		ret = onenand_read_ops_nolock(mtd, from, ops);
+		ret = ONENAND_IS_MLC(this) ?
+			onenand_mlc_read_ops_nolock(mtd, from, ops) :
+			onenand_read_ops_nolock(mtd, from, ops);
 	else
 		ret = onenand_read_oob_nolock(mtd, from, ops);
 	onenand_release_device(mtd);
@@ -1128,11 +1448,11 @@ static int onenand_bbt_wait(struct mtd_info *mtd, int state)
 	ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
 
 	if (interrupt & ONENAND_INT_READ) {
-		int ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
+		int ecc = onenand_read_ecc(this);
 		if (ecc & ONENAND_ECC_2BIT_ALL) {
 			printk(KERN_INFO "onenand_bbt_wait: ecc error = 0x%04x"
 				", controller error 0x%04x\n", ecc, ctrl);
-			return ONENAND_BBT_READ_ERROR;
+			return ONENAND_BBT_READ_ECC_ERROR;
 		}
 	} else {
 		printk(KERN_ERR "onenand_bbt_wait: read timeout!"
@@ -1163,7 +1483,7 @@ int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
 {
 	struct onenand_chip *this = mtd->priv;
 	int read = 0, thislen, column;
-	int ret = 0;
+	int ret = 0, readcmd;
 	size_t len = ops->ooblen;
 	u_char *buf = ops->oobbuf;
 
@@ -1183,17 +1503,22 @@ int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
 
 	column = from & (mtd->oobsize - 1);
 
+	readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB;
+
 	while (read < len) {
 		cond_resched();
 
 		thislen = mtd->oobsize - column;
 		thislen = min_t(int, thislen, len);
 
-		this->command(mtd, ONENAND_CMD_READOOB, from, mtd->oobsize);
+		this->command(mtd, readcmd, from, mtd->oobsize);
 
 		onenand_update_bufferram(mtd, from, 0);
 
-		ret = onenand_bbt_wait(mtd, FL_READING);
+		ret = this->bbt_wait(mtd, FL_READING);
+		if (unlikely(ret))
+			ret = onenand_recover_lsb(mtd, from, ret);
+
 		if (ret)
 			break;
 
@@ -1230,9 +1555,11 @@ static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to
 {
 	struct onenand_chip *this = mtd->priv;
 	u_char *oob_buf = this->oob_buf;
-	int status, i;
+	int status, i, readcmd;
 
-	this->command(mtd, ONENAND_CMD_READOOB, to, mtd->oobsize);
+	readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB;
+
+	this->command(mtd, readcmd, to, mtd->oobsize);
 	onenand_update_bufferram(mtd, to, 0);
 	status = this->wait(mtd, FL_READING);
 	if (status)
@@ -1633,7 +1960,7 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to,
 {
 	struct onenand_chip *this = mtd->priv;
 	int column, ret = 0, oobsize;
-	int written = 0;
+	int written = 0, oobcmd;
 	u_char *oobbuf;
 	size_t len = ops->ooblen;
 	const u_char *buf = ops->oobbuf;
@@ -1675,6 +2002,8 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to,
 
 	oobbuf = this->oob_buf;
 
+	oobcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_PROG : ONENAND_CMD_PROGOOB;
+
 	/* Loop until all data write */
 	while (written < len) {
 		int thislen = min_t(int, oobsize, len - written);
@@ -1692,7 +2021,14 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to,
 			memcpy(oobbuf + column, buf, thislen);
 		this->write_bufferram(mtd, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize);
 
-		this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize);
+		if (ONENAND_IS_MLC(this)) {
+			/* Set main area of DataRAM to 0xff*/
+			memset(this->page_buf, 0xff, mtd->writesize);
+			this->write_bufferram(mtd, ONENAND_DATARAM,
+					 this->page_buf, 0, mtd->writesize);
+		}
+
+		this->command(mtd, oobcmd, to, mtd->oobsize);
 
 		onenand_update_bufferram(mtd, to, 0);
 		if (ONENAND_IS_2PLANE(this)) {
@@ -1815,29 +2151,48 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
 {
 	struct onenand_chip *this = mtd->priv;
 	unsigned int block_size;
-	loff_t addr;
-	int len;
-	int ret = 0;
+	loff_t addr = instr->addr;
+	loff_t len = instr->len;
+	int ret = 0, i;
+	struct mtd_erase_region_info *region = NULL;
+	loff_t region_end = 0;
 
 	DEBUG(MTD_DEBUG_LEVEL3, "onenand_erase: start = 0x%012llx, len = %llu\n", (unsigned long long) instr->addr, (unsigned long long) instr->len);
 
-	block_size = (1 << this->erase_shift);
-
-	/* Start address must align on block boundary */
-	if (unlikely(instr->addr & (block_size - 1))) {
-		printk(KERN_ERR "onenand_erase: Unaligned address\n");
+	/* Do not allow erase past end of device */
+	if (unlikely((len + addr) > mtd->size)) {
+		printk(KERN_ERR "onenand_erase: Erase past end of device\n");
 		return -EINVAL;
 	}
 
-	/* Length must align on block boundary */
-	if (unlikely(instr->len & (block_size - 1))) {
-		printk(KERN_ERR "onenand_erase: Length not block aligned\n");
-		return -EINVAL;
+	if (FLEXONENAND(this)) {
+		/* Find the eraseregion of this address */
+		i = flexonenand_region(mtd, addr);
+		region = &mtd->eraseregions[i];
+
+		block_size = region->erasesize;
+		region_end = region->offset + region->erasesize * region->numblocks;
+
+		/* Start address within region must align on block boundary.
+		 * Erase region's start offset is always block start address.
+		 */
+		if (unlikely((addr - region->offset) & (block_size - 1))) {
+			printk(KERN_ERR "onenand_erase: Unaligned address\n");
+			return -EINVAL;
+		}
+	} else {
+		block_size = 1 << this->erase_shift;
+
+		/* Start address must align on block boundary */
+		if (unlikely(addr & (block_size - 1))) {
+			printk(KERN_ERR "onenand_erase: Unaligned address\n");
+			return -EINVAL;
+		}
 	}
 
-	/* Do not allow erase past end of device */
-	if (unlikely((instr->len + instr->addr) > mtd->size)) {
-		printk(KERN_ERR "onenand_erase: Erase past end of device\n");
+	/* Length must align on block boundary */
+	if (unlikely(len & (block_size - 1))) {
+		printk(KERN_ERR "onenand_erase: Length not block aligned\n");
 		return -EINVAL;
 	}
 
@@ -1847,9 +2202,6 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
 	onenand_get_device(mtd, FL_ERASING);
 
 	/* Loop throught the pages */
-	len = instr->len;
-	addr = instr->addr;
-
 	instr->state = MTD_ERASING;
 
 	while (len) {
@@ -1869,7 +2221,8 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
 		ret = this->wait(mtd, FL_ERASING);
 		/* Check, if it is write protected */
 		if (ret) {
-			printk(KERN_ERR "onenand_erase: Failed erase, block %d\n", (unsigned) (addr >> this->erase_shift));
+			printk(KERN_ERR "onenand_erase: Failed erase, block %d\n",
+						 onenand_block(this, addr));
 			instr->state = MTD_ERASE_FAILED;
 			instr->fail_addr = addr;
 			goto erase_exit;
@@ -1877,6 +2230,22 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
 
 		len -= block_size;
 		addr += block_size;
+
+		if (addr == region_end) {
+			if (!len)
+				break;
+			region++;
+
+			block_size = region->erasesize;
+			region_end = region->offset + region->erasesize * region->numblocks;
+
+			if (len & (block_size - 1)) {
+				/* FIXME: This should be handled at MTD partitioning level. */
+				printk(KERN_ERR "onenand_erase: Unaligned address\n");
+				goto erase_exit;
+			}
+		}
+
 	}
 
 	instr->state = MTD_ERASE_DONE;
@@ -1955,13 +2324,17 @@ static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
 	int block;
 
 	/* Get block number */
-	block = ((int) ofs) >> bbm->bbt_erase_shift;
+	block = onenand_block(this, ofs);
         if (bbm->bbt)
                 bbm->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
 
         /* We write two bytes, so we dont have to mess with 16 bit access */
         ofs += mtd->oobsize + (bbm->badblockpos & ~0x01);
-        return onenand_write_oob_nolock(mtd, ofs, &ops);
+	/* FIXME : What to do when marking SLC block in partition
+	 * 	   with MLC erasesize? For now, it is not advisable to
+	 *	   create partitions containing both SLC and MLC regions.
+	 */
+	return onenand_write_oob_nolock(mtd, ofs, &ops);
 }
 
 /**
@@ -2005,8 +2378,8 @@ static int onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs, size_t len, int
 	int start, end, block, value, status;
 	int wp_status_mask;
 
-	start = ofs >> this->erase_shift;
-	end = len >> this->erase_shift;
+	start = onenand_block(this, ofs);
+	end = onenand_block(this, ofs + len) - 1;
 
 	if (cmd == ONENAND_CMD_LOCK)
 		wp_status_mask = ONENAND_WP_LS;
@@ -2018,7 +2391,7 @@ static int onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs, size_t len, int
 		/* Set start block address */
 		this->write_word(start, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
 		/* Set end block address */
-		this->write_word(start + end - 1, this->base + ONENAND_REG_END_BLOCK_ADDRESS);
+		this->write_word(end, this->base +  ONENAND_REG_END_BLOCK_ADDRESS);
 		/* Write lock command */
 		this->command(mtd, cmd, 0, 0);
 
@@ -2039,7 +2412,7 @@ static int onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs, size_t len, int
 	}
 
 	/* Block lock scheme */
-	for (block = start; block < start + end; block++) {
+	for (block = start; block < end + 1; block++) {
 		/* Set block address */
 		value = onenand_block_address(this, block);
 		this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1);
@@ -2147,7 +2520,7 @@ static void onenand_unlock_all(struct mtd_info *mtd)
 {
 	struct onenand_chip *this = mtd->priv;
 	loff_t ofs = 0;
-	size_t len = this->chipsize;
+	loff_t len = mtd->size;
 
 	if (this->options & ONENAND_HAS_UNLOCK_ALL) {
 		/* Set start block address */
@@ -2163,12 +2536,16 @@ static void onenand_unlock_all(struct mtd_info *mtd)
 		    & ONENAND_CTRL_ONGO)
 			continue;
 
+		/* Don't check lock status */
+		if (this->options & ONENAND_SKIP_UNLOCK_CHECK)
+			return;
+
 		/* Check lock status */
 		if (onenand_check_lock_status(this))
 			return;
 
 		/* Workaround for all block unlock in DDP */
-		if (ONENAND_IS_DDP(this)) {
+		if (ONENAND_IS_DDP(this) && !FLEXONENAND(this)) {
 			/* All blocks on another chip */
 			ofs = this->chipsize >> 1;
 			len = this->chipsize >> 1;
@@ -2210,7 +2587,9 @@ static int do_otp_read(struct mtd_info *mtd, loff_t from, size_t len,
 	this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
 	this->wait(mtd, FL_OTPING);
 
-	ret = onenand_read_ops_nolock(mtd, from, &ops);
+	ret = ONENAND_IS_MLC(this) ?
+		onenand_mlc_read_ops_nolock(mtd, from, &ops) :
+		onenand_read_ops_nolock(mtd, from, &ops);
 
 	/* Exit OTP access mode */
 	this->command(mtd, ONENAND_CMD_RESET, 0, 0);
@@ -2277,21 +2656,32 @@ static int do_otp_lock(struct mtd_info *mtd, loff_t from, size_t len,
 		size_t *retlen, u_char *buf)
 {
 	struct onenand_chip *this = mtd->priv;
-	struct mtd_oob_ops ops = {
-		.mode = MTD_OOB_PLACE,
-		.ooblen = len,
-		.oobbuf = buf,
-		.ooboffs = 0,
-	};
+	struct mtd_oob_ops ops;
 	int ret;
 
 	/* Enter OTP access mode */
 	this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
 	this->wait(mtd, FL_OTPING);
 
-	ret = onenand_write_oob_nolock(mtd, from, &ops);
-
-	*retlen = ops.oobretlen;
+	if (FLEXONENAND(this)) {
+		/*
+		 * For Flex-OneNAND, we write lock mark to 1st word of sector 4 of
+		 * main area of page 49.
+		 */
+		ops.len = mtd->writesize;
+		ops.ooblen = 0;
+		ops.datbuf = buf;
+		ops.oobbuf = NULL;
+		ret = onenand_write_ops_nolock(mtd, mtd->writesize * 49, &ops);
+		*retlen = ops.retlen;
+	} else {
+		ops.mode = MTD_OOB_PLACE;
+		ops.ooblen = len;
+		ops.oobbuf = buf;
+		ops.ooboffs = 0;
+		ret = onenand_write_oob_nolock(mtd, from, &ops);
+		*retlen = ops.oobretlen;
+	}
 
 	/* Exit OTP access mode */
 	this->command(mtd, ONENAND_CMD_RESET, 0, 0);
@@ -2475,27 +2865,34 @@ static int onenand_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
 			size_t len)
 {
 	struct onenand_chip *this = mtd->priv;
-	u_char *oob_buf = this->oob_buf;
+	u_char *buf = FLEXONENAND(this) ? this->page_buf : this->oob_buf;
 	size_t retlen;
 	int ret;
 
-	memset(oob_buf, 0xff, mtd->oobsize);
+	memset(buf, 0xff, FLEXONENAND(this) ? this->writesize
+						 : mtd->oobsize);
 	/*
 	 * Note: OTP lock operation
 	 *       OTP block : 0xXXFC
 	 *       1st block : 0xXXF3 (If chip support)
 	 *       Both      : 0xXXF0 (If chip support)
 	 */
-	oob_buf[ONENAND_OTP_LOCK_OFFSET] = 0xFC;
+	if (FLEXONENAND(this))
+		buf[FLEXONENAND_OTP_LOCK_OFFSET] = 0xFC;
+	else
+		buf[ONENAND_OTP_LOCK_OFFSET] = 0xFC;
 
 	/*
 	 * Write lock mark to 8th word of sector0 of page0 of the spare0.
 	 * We write 16 bytes spare area instead of 2 bytes.
+	 * For Flex-OneNAND, we write lock mark to 1st word of sector 4 of
+	 * main area of page 49.
 	 */
+
 	from = 0;
-	len = 16;
+	len = FLEXONENAND(this) ? mtd->writesize : 16;
 
-	ret = onenand_otp_walk(mtd, from, len, &retlen, oob_buf, do_otp_lock, MTD_OTP_USER);
+	ret = onenand_otp_walk(mtd, from, len, &retlen, buf, do_otp_lock, MTD_OTP_USER);
 
 	return ret ? : retlen;
 }
@@ -2542,6 +2939,14 @@ static void onenand_check_features(struct mtd_info *mtd)
 		break;
 	}
 
+	if (ONENAND_IS_MLC(this))
+		this->options &= ~ONENAND_HAS_2PLANE;
+
+	if (FLEXONENAND(this)) {
+		this->options &= ~ONENAND_HAS_CONT_LOCK;
+		this->options |= ONENAND_HAS_UNLOCK_ALL;
+	}
+
 	if (this->options & ONENAND_HAS_CONT_LOCK)
 		printk(KERN_DEBUG "Lock scheme is Continuous Lock\n");
 	if (this->options & ONENAND_HAS_UNLOCK_ALL)
@@ -2559,14 +2964,16 @@ static void onenand_check_features(struct mtd_info *mtd)
  */
 static void onenand_print_device_info(int device, int version)
 {
-        int vcc, demuxed, ddp, density;
+	int vcc, demuxed, ddp, density, flexonenand;
 
         vcc = device & ONENAND_DEVICE_VCC_MASK;
         demuxed = device & ONENAND_DEVICE_IS_DEMUX;
         ddp = device & ONENAND_DEVICE_IS_DDP;
         density = onenand_get_density(device);
-        printk(KERN_INFO "%sOneNAND%s %dMB %sV 16-bit (0x%02x)\n",
-                demuxed ? "" : "Muxed ",
+	flexonenand = device & DEVICE_IS_FLEXONENAND;
+	printk(KERN_INFO "%s%sOneNAND%s %dMB %sV 16-bit (0x%02x)\n",
+		demuxed ? "" : "Muxed ",
+		flexonenand ? "Flex-" : "",
                 ddp ? "(DDP)" : "",
                 (16 << density),
                 vcc ? "2.65/3.3" : "1.8",
@@ -2576,6 +2983,7 @@ static void onenand_print_device_info(int device, int version)
 
 static const struct onenand_manufacturers onenand_manuf_ids[] = {
         {ONENAND_MFR_SAMSUNG, "Samsung"},
+	{ONENAND_MFR_NUMONYX, "Numonyx"},
 };
 
 /**
@@ -2605,6 +3013,261 @@ static int onenand_check_maf(int manuf)
 }
 
 /**
+* flexonenand_get_boundary	- Reads the SLC boundary
+* @param onenand_info		- onenand info structure
+**/
+static int flexonenand_get_boundary(struct mtd_info *mtd)
+{
+	struct onenand_chip *this = mtd->priv;
+	unsigned die, bdry;
+	int ret, syscfg, locked;
+
+	/* Disable ECC */
+	syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1);
+	this->write_word((syscfg | 0x0100), this->base + ONENAND_REG_SYS_CFG1);
+
+	for (die = 0; die < this->dies; die++) {
+		this->command(mtd, FLEXONENAND_CMD_PI_ACCESS, die, 0);
+		this->wait(mtd, FL_SYNCING);
+
+		this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0);
+		ret = this->wait(mtd, FL_READING);
+
+		bdry = this->read_word(this->base + ONENAND_DATARAM);
+		if ((bdry >> FLEXONENAND_PI_UNLOCK_SHIFT) == 3)
+			locked = 0;
+		else
+			locked = 1;
+		this->boundary[die] = bdry & FLEXONENAND_PI_MASK;
+
+		this->command(mtd, ONENAND_CMD_RESET, 0, 0);
+		ret = this->wait(mtd, FL_RESETING);
+
+		printk(KERN_INFO "Die %d boundary: %d%s\n", die,
+		       this->boundary[die], locked ? "(Locked)" : "(Unlocked)");
+	}
+
+	/* Enable ECC */
+	this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1);
+	return 0;
+}
+
+/**
+ * flexonenand_get_size - Fill up fields in onenand_chip and mtd_info
+ * 			  boundary[], diesize[], mtd->size, mtd->erasesize
+ * @param mtd		- MTD device structure
+ */
+static void flexonenand_get_size(struct mtd_info *mtd)
+{
+	struct onenand_chip *this = mtd->priv;
+	int die, i, eraseshift, density;
+	int blksperdie, maxbdry;
+	loff_t ofs;
+
+	density = onenand_get_density(this->device_id);
+	blksperdie = ((loff_t)(16 << density) << 20) >> (this->erase_shift);
+	blksperdie >>= ONENAND_IS_DDP(this) ? 1 : 0;
+	maxbdry = blksperdie - 1;
+	eraseshift = this->erase_shift - 1;
+
+	mtd->numeraseregions = this->dies << 1;
+
+	/* This fills up the device boundary */
+	flexonenand_get_boundary(mtd);
+	die = ofs = 0;
+	i = -1;
+	for (; die < this->dies; die++) {
+		if (!die || this->boundary[die-1] != maxbdry) {
+			i++;
+			mtd->eraseregions[i].offset = ofs;
+			mtd->eraseregions[i].erasesize = 1 << eraseshift;
+			mtd->eraseregions[i].numblocks =
+							this->boundary[die] + 1;
+			ofs += mtd->eraseregions[i].numblocks << eraseshift;
+			eraseshift++;
+		} else {
+			mtd->numeraseregions -= 1;
+			mtd->eraseregions[i].numblocks +=
+							this->boundary[die] + 1;
+			ofs += (this->boundary[die] + 1) << (eraseshift - 1);
+		}
+		if (this->boundary[die] != maxbdry) {
+			i++;
+			mtd->eraseregions[i].offset = ofs;
+			mtd->eraseregions[i].erasesize = 1 << eraseshift;
+			mtd->eraseregions[i].numblocks = maxbdry ^
+							 this->boundary[die];
+			ofs += mtd->eraseregions[i].numblocks << eraseshift;
+			eraseshift--;
+		} else
+			mtd->numeraseregions -= 1;
+	}
+
+	/* Expose MLC erase size except when all blocks are SLC */
+	mtd->erasesize = 1 << this->erase_shift;
+	if (mtd->numeraseregions == 1)
+		mtd->erasesize >>= 1;
+
+	printk(KERN_INFO "Device has %d eraseregions\n", mtd->numeraseregions);
+	for (i = 0; i < mtd->numeraseregions; i++)
+		printk(KERN_INFO "[offset: 0x%08x, erasesize: 0x%05x,"
+			" numblocks: %04u]\n",
+			(unsigned int) mtd->eraseregions[i].offset,
+			mtd->eraseregions[i].erasesize,
+			mtd->eraseregions[i].numblocks);
+
+	for (die = 0, mtd->size = 0; die < this->dies; die++) {
+		this->diesize[die] = (loff_t)blksperdie << this->erase_shift;
+		this->diesize[die] -= (loff_t)(this->boundary[die] + 1)
+						 << (this->erase_shift - 1);
+		mtd->size += this->diesize[die];
+	}
+}
+
+/**
+ * flexonenand_check_blocks_erased - Check if blocks are erased
+ * @param mtd_info	- mtd info structure
+ * @param start		- first erase block to check
+ * @param end		- last erase block to check
+ *
+ * Converting an unerased block from MLC to SLC
+ * causes byte values to change. Since both data and its ECC
+ * have changed, reads on the block give uncorrectable error.
+ * This might lead to the block being detected as bad.
+ *
+ * Avoid this by ensuring that the block to be converted is
+ * erased.
+ */
+static int flexonenand_check_blocks_erased(struct mtd_info *mtd, int start, int end)
+{
+	struct onenand_chip *this = mtd->priv;
+	int i, ret;
+	int block;
+	struct mtd_oob_ops ops = {
+		.mode = MTD_OOB_PLACE,
+		.ooboffs = 0,
+		.ooblen	= mtd->oobsize,
+		.datbuf	= NULL,
+		.oobbuf	= this->oob_buf,
+	};
+	loff_t addr;
+
+	printk(KERN_DEBUG "Check blocks from %d to %d\n", start, end);
+
+	for (block = start; block <= end; block++) {
+		addr = flexonenand_addr(this, block);
+		if (onenand_block_isbad_nolock(mtd, addr, 0))
+			continue;
+
+		/*
+		 * Since main area write results in ECC write to spare,
+		 * it is sufficient to check only ECC bytes for change.
+		 */
+		ret = onenand_read_oob_nolock(mtd, addr, &ops);
+		if (ret)
+			return ret;
+
+		for (i = 0; i < mtd->oobsize; i++)
+			if (this->oob_buf[i] != 0xff)
+				break;
+
+		if (i != mtd->oobsize) {
+			printk(KERN_WARNING "Block %d not erased.\n", block);
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * flexonenand_set_boundary	- Writes the SLC boundary
+ * @param mtd			- mtd info structure
+ */
+int flexonenand_set_boundary(struct mtd_info *mtd, int die,
+				    int boundary, int lock)
+{
+	struct onenand_chip *this = mtd->priv;
+	int ret, density, blksperdie, old, new, thisboundary;
+	loff_t addr;
+
+	/* Change only once for SDP Flex-OneNAND */
+	if (die && (!ONENAND_IS_DDP(this)))
+		return 0;
+
+	/* boundary value of -1 indicates no required change */
+	if (boundary < 0 || boundary == this->boundary[die])
+		return 0;
+
+	density = onenand_get_density(this->device_id);
+	blksperdie = ((16 << density) << 20) >> this->erase_shift;
+	blksperdie >>= ONENAND_IS_DDP(this) ? 1 : 0;
+
+	if (boundary >= blksperdie) {
+		printk(KERN_ERR "flexonenand_set_boundary: Invalid boundary value. "
+				"Boundary not changed.\n");
+		return -EINVAL;
+	}
+
+	/* Check if converting blocks are erased */
+	old = this->boundary[die] + (die * this->density_mask);
+	new = boundary + (die * this->density_mask);
+	ret = flexonenand_check_blocks_erased(mtd, min(old, new) + 1, max(old, new));
+	if (ret) {
+		printk(KERN_ERR "flexonenand_set_boundary: Please erase blocks before boundary change\n");
+		return ret;
+	}
+
+	this->command(mtd, FLEXONENAND_CMD_PI_ACCESS, die, 0);
+	this->wait(mtd, FL_SYNCING);
+
+	/* Check is boundary is locked */
+	this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0);
+	ret = this->wait(mtd, FL_READING);
+
+	thisboundary = this->read_word(this->base + ONENAND_DATARAM);
+	if ((thisboundary >> FLEXONENAND_PI_UNLOCK_SHIFT) != 3) {
+		printk(KERN_ERR "flexonenand_set_boundary: boundary locked\n");
+		ret = 1;
+		goto out;
+	}
+
+	printk(KERN_INFO "flexonenand_set_boundary: Changing die %d boundary: %d%s\n",
+			die, boundary, lock ? "(Locked)" : "(Unlocked)");
+
+	addr = die ? this->diesize[0] : 0;
+
+	boundary &= FLEXONENAND_PI_MASK;
+	boundary |= lock ? 0 : (3 << FLEXONENAND_PI_UNLOCK_SHIFT);
+
+	this->command(mtd, ONENAND_CMD_ERASE, addr, 0);
+	ret = this->wait(mtd, FL_ERASING);
+	if (ret) {
+		printk(KERN_ERR "flexonenand_set_boundary: Failed PI erase for Die %d\n", die);
+		goto out;
+	}
+
+	this->write_word(boundary, this->base + ONENAND_DATARAM);
+	this->command(mtd, ONENAND_CMD_PROG, addr, 0);
+	ret = this->wait(mtd, FL_WRITING);
+	if (ret) {
+		printk(KERN_ERR "flexonenand_set_boundary: Failed PI write for Die %d\n", die);
+		goto out;
+	}
+
+	this->command(mtd, FLEXONENAND_CMD_PI_UPDATE, die, 0);
+	ret = this->wait(mtd, FL_WRITING);
+out:
+	this->write_word(ONENAND_CMD_RESET, this->base + ONENAND_REG_COMMAND);
+	this->wait(mtd, FL_RESETING);
+	if (!ret)
+		/* Recalculate device size on boundary change*/
+		flexonenand_get_size(mtd);
+
+	return ret;
+}
+
+/**
  * onenand_probe - [OneNAND Interface] Probe the OneNAND device
  * @param mtd		MTD device structure
  *
@@ -2621,7 +3284,7 @@ static int onenand_probe(struct mtd_info *mtd)
 	/* Save system configuration 1 */
 	syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1);
 	/* Clear Sync. Burst Read mode to read BootRAM */
-	this->write_word((syscfg & ~ONENAND_SYS_CFG1_SYNC_READ), this->base + ONENAND_REG_SYS_CFG1);
+	this->write_word((syscfg & ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE), this->base + ONENAND_REG_SYS_CFG1);
 
 	/* Send the command for reading device ID from BootRAM */
 	this->write_word(ONENAND_CMD_READID, this->base + ONENAND_BOOTRAM);
@@ -2646,6 +3309,7 @@ static int onenand_probe(struct mtd_info *mtd)
 	maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
 	dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
 	ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID);
+	this->technology = this->read_word(this->base + ONENAND_REG_TECHNOLOGY);
 
 	/* Check OneNAND device */
 	if (maf_id != bram_maf_id || dev_id != bram_dev_id)
@@ -2657,29 +3321,55 @@ static int onenand_probe(struct mtd_info *mtd)
 	this->version_id = ver_id;
 
 	density = onenand_get_density(dev_id);
+	if (FLEXONENAND(this)) {
+		this->dies = ONENAND_IS_DDP(this) ? 2 : 1;
+		/* Maximum possible erase regions */
+		mtd->numeraseregions = this->dies << 1;
+		mtd->eraseregions = kzalloc(sizeof(struct mtd_erase_region_info)
+					* (this->dies << 1), GFP_KERNEL);
+		if (!mtd->eraseregions)
+			return -ENOMEM;
+	}
+
+	/*
+	 * For Flex-OneNAND, chipsize represents maximum possible device size.
+	 * mtd->size represents the actual device size.
+	 */
 	this->chipsize = (16 << density) << 20;
-	/* Set density mask. it is used for DDP */
-	if (ONENAND_IS_DDP(this))
-		this->density_mask = (1 << (density + 6));
-	else
-		this->density_mask = 0;
 
 	/* OneNAND page size & block size */
 	/* The data buffer size is equal to page size */
 	mtd->writesize = this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE);
+	/* We use the full BufferRAM */
+	if (ONENAND_IS_MLC(this))
+		mtd->writesize <<= 1;
+
 	mtd->oobsize = mtd->writesize >> 5;
 	/* Pages per a block are always 64 in OneNAND */
 	mtd->erasesize = mtd->writesize << 6;
+	/*
+	 * Flex-OneNAND SLC area has 64 pages per block.
+	 * Flex-OneNAND MLC area has 128 pages per block.
+	 * Expose MLC erase size to find erase_shift and page_mask.
+	 */
+	if (FLEXONENAND(this))
+		mtd->erasesize <<= 1;
 
 	this->erase_shift = ffs(mtd->erasesize) - 1;
 	this->page_shift = ffs(mtd->writesize) - 1;
 	this->page_mask = (1 << (this->erase_shift - this->page_shift)) - 1;
+	/* Set density mask. it is used for DDP */
+	if (ONENAND_IS_DDP(this))
+		this->density_mask = this->chipsize >> (this->erase_shift + 1);
 	/* It's real page size */
 	this->writesize = mtd->writesize;
 
 	/* REVIST: Multichip handling */
 
-	mtd->size = this->chipsize;
+	if (FLEXONENAND(this))
+		flexonenand_get_size(mtd);
+	else
+		mtd->size = this->chipsize;
 
 	/* Check OneNAND features */
 	onenand_check_features(mtd);
@@ -2734,7 +3424,7 @@ static void onenand_resume(struct mtd_info *mtd)
  */
 int onenand_scan(struct mtd_info *mtd, int maxchips)
 {
-	int i;
+	int i, ret;
 	struct onenand_chip *this = mtd->priv;
 
 	if (!this->read_word)
@@ -2746,6 +3436,10 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
 		this->command = onenand_command;
 	if (!this->wait)
 		onenand_setup_wait(mtd);
+	if (!this->bbt_wait)
+		this->bbt_wait = onenand_bbt_wait;
+	if (!this->unlock_all)
+		this->unlock_all = onenand_unlock_all;
 
 	if (!this->read_bufferram)
 		this->read_bufferram = onenand_read_bufferram;
@@ -2796,6 +3490,10 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
 	 * Allow subpage writes up to oobsize.
 	 */
 	switch (mtd->oobsize) {
+	case 128:
+		this->ecclayout = &onenand_oob_128;
+		mtd->subpage_sft = 0;
+		break;
 	case 64:
 		this->ecclayout = &onenand_oob_64;
 		mtd->subpage_sft = 2;
@@ -2859,9 +3557,18 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
 	mtd->owner = THIS_MODULE;
 
 	/* Unlock whole block */
-	onenand_unlock_all(mtd);
+	this->unlock_all(mtd);
+
+	ret = this->scan_bbt(mtd);
+	if ((!FLEXONENAND(this)) || ret)
+		return ret;
 
-	return this->scan_bbt(mtd);
+	/* Change Flex-OneNAND boundaries if required */
+	for (i = 0; i < MAX_DIES; i++)
+		flexonenand_set_boundary(mtd, i, flex_bdry[2 * i],
+						 flex_bdry[(2 * i) + 1]);
+
+	return 0;
 }
 
 /**
@@ -2890,6 +3597,7 @@ void onenand_release(struct mtd_info *mtd)
 		kfree(this->page_buf);
 	if (this->options & ONENAND_OOBBUF_ALLOC)
 		kfree(this->oob_buf);
+	kfree(mtd->eraseregions);
 }
 
 EXPORT_SYMBOL_GPL(onenand_scan);
diff --git a/drivers/mtd/onenand/onenand_bbt.c b/drivers/mtd/onenand/onenand_bbt.c
index 2f53b51c680..a91fcac1af0 100644
--- a/drivers/mtd/onenand/onenand_bbt.c
+++ b/drivers/mtd/onenand/onenand_bbt.c
@@ -63,6 +63,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
 	loff_t from;
 	size_t readlen, ooblen;
 	struct mtd_oob_ops ops;
+	int rgn;
 
 	printk(KERN_INFO "Scanning device for bad blocks\n");
 
@@ -76,7 +77,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
 	/* Note that numblocks is 2 * (real numblocks) here;
 	 * see i += 2 below as it makses shifting and masking less painful
 	 */
-	numblocks = mtd->size >> (bbm->bbt_erase_shift - 1);
+	numblocks = this->chipsize >> (bbm->bbt_erase_shift - 1);
 	startblock = 0;
 	from = 0;
 
@@ -106,7 +107,12 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
 			}
 		}
 		i += 2;
-		from += (1 << bbm->bbt_erase_shift);
+
+		if (FLEXONENAND(this)) {
+			rgn = flexonenand_region(mtd, from);
+			from += mtd->eraseregions[rgn].erasesize;
+		} else
+			from += (1 << bbm->bbt_erase_shift);
 	}
 
 	return 0;
@@ -143,7 +149,7 @@ static int onenand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
 	uint8_t res;
 
 	/* Get block number * 2 */
-	block = (int) (offs >> (bbm->bbt_erase_shift - 1));
+	block = (int) (onenand_block(this, offs) << 1);
 	res = (bbm->bbt[block >> 3] >> (block & 0x06)) & 0x03;
 
 	DEBUG(MTD_DEBUG_LEVEL2, "onenand_isbad_bbt: bbt info for offs 0x%08x: (block %d) 0x%02x\n",
@@ -178,7 +184,7 @@ int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
 	struct bbm_info *bbm = this->bbm;
 	int len, ret = 0;
 
-	len = mtd->size >> (this->erase_shift + 2);
+	len = this->chipsize >> (this->erase_shift + 2);
 	/* Allocate memory (2bit per block) and clear the memory bad block table */
 	bbm->bbt = kzalloc(len, GFP_KERNEL);
 	if (!bbm->bbt) {
diff --git a/drivers/mtd/onenand/onenand_sim.c b/drivers/mtd/onenand/onenand_sim.c
index d64200b7c94..f6e3c8aebd3 100644
--- a/drivers/mtd/onenand/onenand_sim.c
+++ b/drivers/mtd/onenand/onenand_sim.c
@@ -6,6 +6,10 @@
  *  Copyright © 2005-2007 Samsung Electronics
  *  Kyungmin Park <kyungmin.park@samsung.com>
  *
+ *  Vishak G <vishak.g at samsung.com>, Rohit Hagargundgi <h.rohit at samsung.com>
+ *  Flex-OneNAND simulator support
+ *  Copyright (C) Samsung Electronics, 2008
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -24,16 +28,38 @@
 #ifndef CONFIG_ONENAND_SIM_MANUFACTURER
 #define CONFIG_ONENAND_SIM_MANUFACTURER         0xec
 #endif
+
 #ifndef CONFIG_ONENAND_SIM_DEVICE_ID
 #define CONFIG_ONENAND_SIM_DEVICE_ID            0x04
 #endif
+
+#define CONFIG_FLEXONENAND ((CONFIG_ONENAND_SIM_DEVICE_ID >> 9) & 1)
+
 #ifndef CONFIG_ONENAND_SIM_VERSION_ID
 #define CONFIG_ONENAND_SIM_VERSION_ID           0x1e
 #endif
 
+#ifndef CONFIG_ONENAND_SIM_TECHNOLOGY_ID
+#define CONFIG_ONENAND_SIM_TECHNOLOGY_ID CONFIG_FLEXONENAND
+#endif
+
+/* Initial boundary values for Flex-OneNAND Simulator */
+#ifndef CONFIG_FLEXONENAND_SIM_DIE0_BOUNDARY
+#define CONFIG_FLEXONENAND_SIM_DIE0_BOUNDARY	0x01
+#endif
+
+#ifndef CONFIG_FLEXONENAND_SIM_DIE1_BOUNDARY
+#define CONFIG_FLEXONENAND_SIM_DIE1_BOUNDARY	0x01
+#endif
+
 static int manuf_id	= CONFIG_ONENAND_SIM_MANUFACTURER;
 static int device_id	= CONFIG_ONENAND_SIM_DEVICE_ID;
 static int version_id	= CONFIG_ONENAND_SIM_VERSION_ID;
+static int technology_id = CONFIG_ONENAND_SIM_TECHNOLOGY_ID;
+static int boundary[] = {
+	CONFIG_FLEXONENAND_SIM_DIE0_BOUNDARY,
+	CONFIG_FLEXONENAND_SIM_DIE1_BOUNDARY,
+};
 
 struct onenand_flash {
 	void __iomem *base;
@@ -57,12 +83,18 @@ struct onenand_flash {
 	(writew(v, this->base + ONENAND_REG_WP_STATUS))
 
 /* It has all 0xff chars */
-#define MAX_ONENAND_PAGESIZE		(2048 + 64)
+#define MAX_ONENAND_PAGESIZE		(4096 + 128)
 static unsigned char *ffchars;
 
+#if CONFIG_FLEXONENAND
+#define PARTITION_NAME "Flex-OneNAND simulator partition"
+#else
+#define PARTITION_NAME "OneNAND simulator partition"
+#endif
+
 static struct mtd_partition os_partitions[] = {
 	{
-		.name		= "OneNAND simulator partition",
+		.name		= PARTITION_NAME,
 		.offset		= 0,
 		.size		= MTDPART_SIZ_FULL,
 	},
@@ -104,6 +136,7 @@ static void onenand_lock_handle(struct onenand_chip *this, int cmd)
 
 	switch (cmd) {
 	case ONENAND_CMD_UNLOCK:
+	case ONENAND_CMD_UNLOCK_ALL:
 		if (block_lock_scheme)
 			ONENAND_SET_WP_STATUS(ONENAND_WP_US, this);
 		else
@@ -228,10 +261,12 @@ static void onenand_data_handle(struct onenand_chip *this, int cmd,
 {
 	struct mtd_info *mtd = &info->mtd;
 	struct onenand_flash *flash = this->priv;
-	int main_offset, spare_offset;
+	int main_offset, spare_offset, die = 0;
 	void __iomem *src;
 	void __iomem *dest;
 	unsigned int i;
+	static int pi_operation;
+	int erasesize, rgn;
 
 	if (dataram) {
 		main_offset = mtd->writesize;
@@ -241,10 +276,27 @@ static void onenand_data_handle(struct onenand_chip *this, int cmd,
 		spare_offset = 0;
 	}
 
+	if (pi_operation) {
+		die = readw(this->base + ONENAND_REG_START_ADDRESS2);
+		die >>= ONENAND_DDP_SHIFT;
+	}
+
 	switch (cmd) {
+	case FLEXONENAND_CMD_PI_ACCESS:
+		pi_operation = 1;
+		break;
+
+	case ONENAND_CMD_RESET:
+		pi_operation = 0;
+		break;
+
 	case ONENAND_CMD_READ:
 		src = ONENAND_CORE(flash) + offset;
 		dest = ONENAND_MAIN_AREA(this, main_offset);
+		if (pi_operation) {
+			writew(boundary[die], this->base + ONENAND_DATARAM);
+			break;
+		}
 		memcpy(dest, src, mtd->writesize);
 		/* Fall through */
 
@@ -257,6 +309,10 @@ static void onenand_data_handle(struct onenand_chip *this, int cmd,
 	case ONENAND_CMD_PROG:
 		src = ONENAND_MAIN_AREA(this, main_offset);
 		dest = ONENAND_CORE(flash) + offset;
+		if (pi_operation) {
+			boundary[die] = readw(this->base + ONENAND_DATARAM);
+			break;
+		}
 		/* To handle partial write */
 		for (i = 0; i < (1 << mtd->subpage_sft); i++) {
 			int off = i * this->subpagesize;
@@ -284,9 +340,18 @@ static void onenand_data_handle(struct onenand_chip *this, int cmd,
 		break;
 
 	case ONENAND_CMD_ERASE:
-		memset(ONENAND_CORE(flash) + offset, 0xff, mtd->erasesize);
+		if (pi_operation)
+			break;
+
+		if (FLEXONENAND(this)) {
+			rgn = flexonenand_region(mtd, offset);
+			erasesize = mtd->eraseregions[rgn].erasesize;
+		} else
+			erasesize = mtd->erasesize;
+
+		memset(ONENAND_CORE(flash) + offset, 0xff, erasesize);
 		memset(ONENAND_CORE_SPARE(flash, this, offset), 0xff,
-		       (mtd->erasesize >> 5));
+		       (erasesize >> 5));
 		break;
 
 	default:
@@ -339,7 +404,7 @@ static void onenand_command_handle(struct onenand_chip *this, int cmd)
 	}
 
 	if (block != -1)
-		offset += block << this->erase_shift;
+		offset = onenand_addr(this, block);
 
 	if (page != -1)
 		offset += page << this->page_shift;
@@ -390,6 +455,7 @@ static int __init flash_init(struct onenand_flash *flash)
 	}
 
 	density = device_id >> ONENAND_DEVICE_DENSITY_SHIFT;
+	density &= ONENAND_DEVICE_DENSITY_MASK;
 	size = ((16 << 20) << density);
 
 	ONENAND_CORE(flash) = vmalloc(size + (size >> 5));
@@ -405,8 +471,9 @@ static int __init flash_init(struct onenand_flash *flash)
 	writew(manuf_id, flash->base + ONENAND_REG_MANUFACTURER_ID);
 	writew(device_id, flash->base + ONENAND_REG_DEVICE_ID);
 	writew(version_id, flash->base + ONENAND_REG_VERSION_ID);
+	writew(technology_id, flash->base + ONENAND_REG_TECHNOLOGY);
 
-	if (density < 2)
+	if (density < 2 && (!CONFIG_FLEXONENAND))
 		buffer_size = 0x0400;	/* 1KiB page */
 	else
 		buffer_size = 0x0800;	/* 2KiB page */
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 892a9e4e275..1dc721517e4 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2443,6 +2443,17 @@ config JME
 	  To compile this driver as a module, choose M here. The module
 	  will be called jme.
 
+config S6GMAC
+	tristate "S6105 GMAC ethernet support"
+	depends on XTENSA_VARIANT_S6000
+	select PHYLIB
+	help
+	  This driver supports the on chip ethernet device on the
+	  S6105 xtensa processor.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called s6gmac.
+
 endif # NETDEV_1000
 
 #
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index d366fb2b40e..4b58a59f211 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -245,6 +245,7 @@ obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
 
 obj-$(CONFIG_DNET) += dnet.o
 obj-$(CONFIG_MACB) += macb.o
+obj-$(CONFIG_S6GMAC) += s6gmac.o
 
 obj-$(CONFIG_ARM) += arm/
 obj-$(CONFIG_DEV_APPLETALK) += appletalk/
diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index b4bb06fdf30..f703758f0a6 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -65,7 +65,7 @@ static inline char *nic_name(struct pci_dev *pdev)
 #define TX_CQ_LEN		1024
 #define RX_Q_LEN		1024	/* Does not support any other value */
 #define RX_CQ_LEN		1024
-#define MCC_Q_LEN		64	/* total size not to exceed 8 pages */
+#define MCC_Q_LEN		128	/* total size not to exceed 8 pages */
 #define MCC_CQ_LEN		256
 
 #define BE_NAPI_WEIGHT		64
@@ -91,6 +91,61 @@ struct be_queue_info {
 	atomic_t used;	/* Number of valid elements in the queue */
 };
 
+static inline u32 MODULO(u16 val, u16 limit)
+{
+	BUG_ON(limit & (limit - 1));
+	return val & (limit - 1);
+}
+
+static inline void index_adv(u16 *index, u16 val, u16 limit)
+{
+	*index = MODULO((*index + val), limit);
+}
+
+static inline void index_inc(u16 *index, u16 limit)
+{
+	*index = MODULO((*index + 1), limit);
+}
+
+static inline void *queue_head_node(struct be_queue_info *q)
+{
+	return q->dma_mem.va + q->head * q->entry_size;
+}
+
+static inline void *queue_tail_node(struct be_queue_info *q)
+{
+	return q->dma_mem.va + q->tail * q->entry_size;
+}
+
+static inline void queue_head_inc(struct be_queue_info *q)
+{
+	index_inc(&q->head, q->len);
+}
+
+static inline void queue_tail_inc(struct be_queue_info *q)
+{
+	index_inc(&q->tail, q->len);
+}
+
+
+struct be_eq_obj {
+	struct be_queue_info q;
+	char desc[32];
+
+	/* Adaptive interrupt coalescing (AIC) info */
+	bool enable_aic;
+	u16 min_eqd;		/* in usecs */
+	u16 max_eqd;		/* in usecs */
+	u16 cur_eqd;		/* in usecs */
+
+	struct napi_struct napi;
+};
+
+struct be_mcc_obj {
+	struct be_queue_info q;
+	struct be_queue_info cq;
+};
+
 struct be_ctrl_info {
 	u8 __iomem *csr;
 	u8 __iomem *db;		/* Door Bell */
@@ -98,11 +153,20 @@ struct be_ctrl_info {
 	int pci_func;
 
 	/* Mbox used for cmd request/response */
-	spinlock_t cmd_lock;	/* For serializing cmds to BE card */
+	spinlock_t mbox_lock;	/* For serializing mbox cmds to BE card */
 	struct be_dma_mem mbox_mem;
 	/* Mbox mem is adjusted to align to 16 bytes. The allocated addr
 	 * is stored for freeing purpose */
 	struct be_dma_mem mbox_mem_alloced;
+
+	/* MCC Rings */
+	struct be_mcc_obj mcc_obj;
+	spinlock_t mcc_lock;	/* For serializing mcc cmds to BE card */
+	spinlock_t mcc_cq_lock;
+
+	/* MCC Async callback */
+	void (*async_cb)(void *adapter, bool link_up);
+	void *adapter_ctxt;
 };
 
 #include "be_cmds.h"
@@ -150,19 +214,6 @@ struct be_stats_obj {
 	struct be_dma_mem cmd;
 };
 
-struct be_eq_obj {
-	struct be_queue_info q;
-	char desc[32];
-
-	/* Adaptive interrupt coalescing (AIC) info */
-	bool enable_aic;
-	u16 min_eqd;		/* in usecs */
-	u16 max_eqd;		/* in usecs */
-	u16 cur_eqd;		/* in usecs */
-
-	struct napi_struct napi;
-};
-
 struct be_tx_obj {
 	struct be_queue_info q;
 	struct be_queue_info cq;
@@ -225,8 +276,9 @@ struct be_adapter {
 	u32 if_handle;		/* Used to configure filtering */
 	u32 pmac_id;		/* MAC addr handle used by BE card */
 
-	struct be_link_info link;
+	bool link_up;
 	u32 port_num;
+	bool promiscuous;
 };
 
 extern struct ethtool_ops be_ethtool_ops;
@@ -235,22 +287,6 @@ extern struct ethtool_ops be_ethtool_ops;
 
 #define BE_SET_NETDEV_OPS(netdev, ops)	(netdev->netdev_ops = ops)
 
-static inline u32 MODULO(u16 val, u16 limit)
-{
-	BUG_ON(limit & (limit - 1));
-	return val & (limit - 1);
-}
-
-static inline void index_adv(u16 *index, u16 val, u16 limit)
-{
-	*index = MODULO((*index + val), limit);
-}
-
-static inline void index_inc(u16 *index, u16 limit)
-{
-	*index = MODULO((*index + 1), limit);
-}
-
 #define PAGE_SHIFT_4K		12
 #define PAGE_SIZE_4K		(1 << PAGE_SHIFT_4K)
 
@@ -339,4 +375,6 @@ static inline u8 is_udp_pkt(struct sk_buff *skb)
 	return val;
 }
 
+extern void be_cq_notify(struct be_ctrl_info *ctrl, u16 qid, bool arm,
+		u16 num_popped);
 #endif				/* BE_H */
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index d444aed962b..583517ed56f 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -17,6 +17,133 @@
 
 #include "be.h"
 
+static void be_mcc_notify(struct be_ctrl_info *ctrl)
+{
+	struct be_queue_info *mccq = &ctrl->mcc_obj.q;
+	u32 val = 0;
+
+	val |= mccq->id & DB_MCCQ_RING_ID_MASK;
+	val |= 1 << DB_MCCQ_NUM_POSTED_SHIFT;
+	iowrite32(val, ctrl->db + DB_MCCQ_OFFSET);
+}
+
+/* To check if valid bit is set, check the entire word as we don't know
+ * the endianness of the data (old entry is host endian while a new entry is
+ * little endian) */
+static inline bool be_mcc_compl_is_new(struct be_mcc_cq_entry *compl)
+{
+	if (compl->flags != 0) {
+		compl->flags = le32_to_cpu(compl->flags);
+		BUG_ON((compl->flags & CQE_FLAGS_VALID_MASK) == 0);
+		return true;
+	} else {
+		return false;
+	}
+}
+
+/* Need to reset the entire word that houses the valid bit */
+static inline void be_mcc_compl_use(struct be_mcc_cq_entry *compl)
+{
+	compl->flags = 0;
+}
+
+static int be_mcc_compl_process(struct be_ctrl_info *ctrl,
+	struct be_mcc_cq_entry *compl)
+{
+	u16 compl_status, extd_status;
+
+	/* Just swap the status to host endian; mcc tag is opaquely copied
+	 * from mcc_wrb */
+	be_dws_le_to_cpu(compl, 4);
+
+	compl_status = (compl->status >> CQE_STATUS_COMPL_SHIFT) &
+				CQE_STATUS_COMPL_MASK;
+	if (compl_status != MCC_STATUS_SUCCESS) {
+		extd_status = (compl->status >> CQE_STATUS_EXTD_SHIFT) &
+				CQE_STATUS_EXTD_MASK;
+		printk(KERN_WARNING DRV_NAME
+			" error in cmd completion: status(compl/extd)=%d/%d\n",
+			compl_status, extd_status);
+		return -1;
+	}
+	return 0;
+}
+
+/* Link state evt is a string of bytes; no need for endian swapping */
+static void be_async_link_state_process(struct be_ctrl_info *ctrl,
+		struct be_async_event_link_state *evt)
+{
+	ctrl->async_cb(ctrl->adapter_ctxt,
+		evt->port_link_status == ASYNC_EVENT_LINK_UP ? true : false);
+}
+
+static inline bool is_link_state_evt(u32 trailer)
+{
+	return (((trailer >> ASYNC_TRAILER_EVENT_CODE_SHIFT) &
+		ASYNC_TRAILER_EVENT_CODE_MASK) ==
+				ASYNC_EVENT_CODE_LINK_STATE);
+}
+
+static struct be_mcc_cq_entry *be_mcc_compl_get(struct be_ctrl_info *ctrl)
+{
+	struct be_queue_info *mcc_cq = &ctrl->mcc_obj.cq;
+	struct be_mcc_cq_entry *compl = queue_tail_node(mcc_cq);
+
+	if (be_mcc_compl_is_new(compl)) {
+		queue_tail_inc(mcc_cq);
+		return compl;
+	}
+	return NULL;
+}
+
+void be_process_mcc(struct be_ctrl_info *ctrl)
+{
+	struct be_mcc_cq_entry *compl;
+	int num = 0;
+
+	spin_lock_bh(&ctrl->mcc_cq_lock);
+	while ((compl = be_mcc_compl_get(ctrl))) {
+		if (compl->flags & CQE_FLAGS_ASYNC_MASK) {
+			/* Interpret flags as an async trailer */
+			BUG_ON(!is_link_state_evt(compl->flags));
+
+			/* Interpret compl as a async link evt */
+			be_async_link_state_process(ctrl,
+				(struct be_async_event_link_state *) compl);
+		} else {
+			be_mcc_compl_process(ctrl, compl);
+			atomic_dec(&ctrl->mcc_obj.q.used);
+		}
+		be_mcc_compl_use(compl);
+		num++;
+	}
+	if (num)
+		be_cq_notify(ctrl, ctrl->mcc_obj.cq.id, true, num);
+	spin_unlock_bh(&ctrl->mcc_cq_lock);
+}
+
+/* Wait till no more pending mcc requests are present */
+static void be_mcc_wait_compl(struct be_ctrl_info *ctrl)
+{
+#define mcc_timeout		50000 /* 5s timeout */
+	int i;
+	for (i = 0; i < mcc_timeout; i++) {
+		be_process_mcc(ctrl);
+		if (atomic_read(&ctrl->mcc_obj.q.used) == 0)
+			break;
+		udelay(100);
+	}
+	if (i == mcc_timeout)
+		printk(KERN_WARNING DRV_NAME "mcc poll timed out\n");
+}
+
+/* Notify MCC requests and wait for completion */
+static void be_mcc_notify_wait(struct be_ctrl_info *ctrl)
+{
+	be_mcc_notify(ctrl);
+	be_mcc_wait_compl(ctrl);
+}
+
 static int be_mbox_db_ready_wait(void __iomem *db)
 {
 	int cnt = 0, wait = 5;
@@ -44,11 +171,11 @@ static int be_mbox_db_ready_wait(void __iomem *db)
 
 /*
  * Insert the mailbox address into the doorbell in two steps
+ * Polls on the mbox doorbell till a command completion (or a timeout) occurs
  */
 static int be_mbox_db_ring(struct be_ctrl_info *ctrl)
 {
 	int status;
-	u16 compl_status, extd_status;
 	u32 val = 0;
 	void __iomem *db = ctrl->db + MPU_MAILBOX_DB_OFFSET;
 	struct be_dma_mem *mbox_mem = &ctrl->mbox_mem;
@@ -79,24 +206,17 @@ static int be_mbox_db_ring(struct be_ctrl_info *ctrl)
 	if (status != 0)
 		return status;
 
-	/* compl entry has been made now */
-	be_dws_le_to_cpu(cqe, sizeof(*cqe));
-	if (!(cqe->flags & CQE_FLAGS_VALID_MASK)) {
-		printk(KERN_WARNING DRV_NAME ": ERROR invalid mbox compl\n");
+	/* A cq entry has been made now */
+	if (be_mcc_compl_is_new(cqe)) {
+		status = be_mcc_compl_process(ctrl, &mbox->cqe);
+		be_mcc_compl_use(cqe);
+		if (status)
+			return status;
+	} else {
+		printk(KERN_WARNING DRV_NAME "invalid mailbox completion\n");
 		return -1;
 	}
-
-	compl_status = (cqe->status >> CQE_STATUS_COMPL_SHIFT) &
-				CQE_STATUS_COMPL_MASK;
-	if (compl_status != MCC_STATUS_SUCCESS) {
-		extd_status = (cqe->status >> CQE_STATUS_EXTD_SHIFT) &
-				CQE_STATUS_EXTD_MASK;
-		printk(KERN_WARNING DRV_NAME
-			": ERROR in cmd compl. status(compl/extd)=%d/%d\n",
-			compl_status, extd_status);
-	}
-
-	return compl_status;
+	return 0;
 }
 
 static int be_POST_stage_get(struct be_ctrl_info *ctrl, u16 *stage)
@@ -235,6 +355,18 @@ static inline struct be_mcc_wrb *wrb_from_mbox(struct be_dma_mem *mbox_mem)
 	return &((struct be_mcc_mailbox *)(mbox_mem->va))->wrb;
 }
 
+static inline struct be_mcc_wrb *wrb_from_mcc(struct be_queue_info *mccq)
+{
+	struct be_mcc_wrb *wrb = NULL;
+	if (atomic_read(&mccq->used) < mccq->len) {
+		wrb = queue_head_node(mccq);
+		queue_head_inc(mccq);
+		atomic_inc(&mccq->used);
+		memset(wrb, 0, sizeof(*wrb));
+	}
+	return wrb;
+}
+
 int be_cmd_eq_create(struct be_ctrl_info *ctrl,
 		struct be_queue_info *eq, int eq_delay)
 {
@@ -244,7 +376,7 @@ int be_cmd_eq_create(struct be_ctrl_info *ctrl,
 	struct be_dma_mem *q_mem = &eq->dma_mem;
 	int status;
 
-	spin_lock(&ctrl->cmd_lock);
+	spin_lock(&ctrl->mbox_lock);
 	memset(wrb, 0, sizeof(*wrb));
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -272,7 +404,7 @@ int be_cmd_eq_create(struct be_ctrl_info *ctrl,
 		eq->id = le16_to_cpu(resp->eq_id);
 		eq->created = true;
 	}
-	spin_unlock(&ctrl->cmd_lock);
+	spin_unlock(&ctrl->mbox_lock);
 	return status;
 }
 
@@ -284,7 +416,7 @@ int be_cmd_mac_addr_query(struct be_ctrl_info *ctrl, u8 *mac_addr,
 	struct be_cmd_resp_mac_query *resp = embedded_payload(wrb);
 	int status;
 
-	spin_lock(&ctrl->cmd_lock);
+	spin_lock(&ctrl->mbox_lock);
 	memset(wrb, 0, sizeof(*wrb));
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -304,7 +436,7 @@ int be_cmd_mac_addr_query(struct be_ctrl_info *ctrl, u8 *mac_addr,
 	if (!status)
 		memcpy(mac_addr, resp->mac.addr, ETH_ALEN);
 
-	spin_unlock(&ctrl->cmd_lock);
+	spin_unlock(&ctrl->mbox_lock);
 	return status;
 }
 
@@ -315,7 +447,7 @@ int be_cmd_pmac_add(struct be_ctrl_info *ctrl, u8 *mac_addr,
 	struct be_cmd_req_pmac_add *req = embedded_payload(wrb);
 	int status;
 
-	spin_lock(&ctrl->cmd_lock);
+	spin_lock(&ctrl->mbox_lock);
 	memset(wrb, 0, sizeof(*wrb));
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -332,7 +464,7 @@ int be_cmd_pmac_add(struct be_ctrl_info *ctrl, u8 *mac_addr,
 		*pmac_id = le32_to_cpu(resp->pmac_id);
 	}
 
-	spin_unlock(&ctrl->cmd_lock);
+	spin_unlock(&ctrl->mbox_lock);
 	return status;
 }
 
@@ -342,7 +474,7 @@ int be_cmd_pmac_del(struct be_ctrl_info *ctrl, u32 if_id, u32 pmac_id)
 	struct be_cmd_req_pmac_del *req = embedded_payload(wrb);
 	int status;
 
-	spin_lock(&ctrl->cmd_lock);
+	spin_lock(&ctrl->mbox_lock);
 	memset(wrb, 0, sizeof(*wrb));
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -354,7 +486,7 @@ int be_cmd_pmac_del(struct be_ctrl_info *ctrl, u32 if_id, u32 pmac_id)
 	req->pmac_id = cpu_to_le32(pmac_id);
 
 	status = be_mbox_db_ring(ctrl);
-	spin_unlock(&ctrl->cmd_lock);
+	spin_unlock(&ctrl->mbox_lock);
 
 	return status;
 }
@@ -370,7 +502,7 @@ int be_cmd_cq_create(struct be_ctrl_info *ctrl,
 	void *ctxt = &req->context;
 	int status;
 
-	spin_lock(&ctrl->cmd_lock);
+	spin_lock(&ctrl->mbox_lock);
 	memset(wrb, 0, sizeof(*wrb));
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -388,7 +520,7 @@ int be_cmd_cq_create(struct be_ctrl_info *ctrl,
 	AMAP_SET_BITS(struct amap_cq_context, solevent, ctxt, sol_evts);
 	AMAP_SET_BITS(struct amap_cq_context, eventable, ctxt, 1);
 	AMAP_SET_BITS(struct amap_cq_context, eqid, ctxt, eq->id);
-	AMAP_SET_BITS(struct amap_cq_context, armed, ctxt, 0);
+	AMAP_SET_BITS(struct amap_cq_context, armed, ctxt, 1);
 	AMAP_SET_BITS(struct amap_cq_context, func, ctxt, ctrl->pci_func);
 	be_dws_cpu_to_le(ctxt, sizeof(req->context));
 
@@ -399,7 +531,56 @@ int be_cmd_cq_create(struct be_ctrl_info *ctrl,
 		cq->id = le16_to_cpu(resp->cq_id);
 		cq->created = true;
 	}
-	spin_unlock(&ctrl->cmd_lock);
+	spin_unlock(&ctrl->mbox_lock);
+
+	return status;
+}
+
+static u32 be_encoded_q_len(int q_len)
+{
+	u32 len_encoded = fls(q_len); /* log2(len) + 1 */
+	if (len_encoded == 16)
+		len_encoded = 0;
+	return len_encoded;
+}
+
+int be_cmd_mccq_create(struct be_ctrl_info *ctrl,
+			struct be_queue_info *mccq,
+			struct be_queue_info *cq)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_cmd_req_mcc_create *req = embedded_payload(wrb);
+	struct be_dma_mem *q_mem = &mccq->dma_mem;
+	void *ctxt = &req->context;
+	int status;
+
+	spin_lock(&ctrl->mbox_lock);
+	memset(wrb, 0, sizeof(*wrb));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+			OPCODE_COMMON_MCC_CREATE, sizeof(*req));
+
+	req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size);
+
+	AMAP_SET_BITS(struct amap_mcc_context, fid, ctxt, ctrl->pci_func);
+	AMAP_SET_BITS(struct amap_mcc_context, valid, ctxt, 1);
+	AMAP_SET_BITS(struct amap_mcc_context, ring_size, ctxt,
+		be_encoded_q_len(mccq->len));
+	AMAP_SET_BITS(struct amap_mcc_context, cq_id, ctxt, cq->id);
+
+	be_dws_cpu_to_le(ctxt, sizeof(req->context));
+
+	be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
+
+	status = be_mbox_db_ring(ctrl);
+	if (!status) {
+		struct be_cmd_resp_mcc_create *resp = embedded_payload(wrb);
+		mccq->id = le16_to_cpu(resp->id);
+		mccq->created = true;
+	}
+	spin_unlock(&ctrl->mbox_lock);
 
 	return status;
 }
@@ -415,7 +596,7 @@ int be_cmd_txq_create(struct be_ctrl_info *ctrl,
 	int status;
 	u32 len_encoded;
 
-	spin_lock(&ctrl->cmd_lock);
+	spin_lock(&ctrl->mbox_lock);
 	memset(wrb, 0, sizeof(*wrb));
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -446,7 +627,7 @@ int be_cmd_txq_create(struct be_ctrl_info *ctrl,
 		txq->id = le16_to_cpu(resp->cid);
 		txq->created = true;
 	}
-	spin_unlock(&ctrl->cmd_lock);
+	spin_unlock(&ctrl->mbox_lock);
 
 	return status;
 }
@@ -460,7 +641,7 @@ int be_cmd_rxq_create(struct be_ctrl_info *ctrl,
 	struct be_dma_mem *q_mem = &rxq->dma_mem;
 	int status;
 
-	spin_lock(&ctrl->cmd_lock);
+	spin_lock(&ctrl->mbox_lock);
 	memset(wrb, 0, sizeof(*wrb));
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -482,7 +663,7 @@ int be_cmd_rxq_create(struct be_ctrl_info *ctrl,
 		rxq->id = le16_to_cpu(resp->id);
 		rxq->created = true;
 	}
-	spin_unlock(&ctrl->cmd_lock);
+	spin_unlock(&ctrl->mbox_lock);
 
 	return status;
 }
@@ -496,7 +677,7 @@ int be_cmd_q_destroy(struct be_ctrl_info *ctrl, struct be_queue_info *q,
 	u8 subsys = 0, opcode = 0;
 	int status;
 
-	spin_lock(&ctrl->cmd_lock);
+	spin_lock(&ctrl->mbox_lock);
 
 	memset(wrb, 0, sizeof(*wrb));
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -518,6 +699,10 @@ int be_cmd_q_destroy(struct be_ctrl_info *ctrl, struct be_queue_info *q,
 		subsys = CMD_SUBSYSTEM_ETH;
 		opcode = OPCODE_ETH_RX_DESTROY;
 		break;
+	case QTYPE_MCCQ:
+		subsys = CMD_SUBSYSTEM_COMMON;
+		opcode = OPCODE_COMMON_MCC_DESTROY;
+		break;
 	default:
 		printk(KERN_WARNING DRV_NAME ":bad Q type in Q destroy cmd\n");
 		status = -1;
@@ -528,7 +713,7 @@ int be_cmd_q_destroy(struct be_ctrl_info *ctrl, struct be_queue_info *q,
 
 	status = be_mbox_db_ring(ctrl);
 err:
-	spin_unlock(&ctrl->cmd_lock);
+	spin_unlock(&ctrl->mbox_lock);
 
 	return status;
 }
@@ -541,7 +726,7 @@ int be_cmd_if_create(struct be_ctrl_info *ctrl, u32 flags, u8 *mac,
 	struct be_cmd_req_if_create *req = embedded_payload(wrb);
 	int status;
 
-	spin_lock(&ctrl->cmd_lock);
+	spin_lock(&ctrl->mbox_lock);
 	memset(wrb, 0, sizeof(*wrb));
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -562,7 +747,7 @@ int be_cmd_if_create(struct be_ctrl_info *ctrl, u32 flags, u8 *mac,
 			*pmac_id = le32_to_cpu(resp->pmac_id);
 	}
 
-	spin_unlock(&ctrl->cmd_lock);
+	spin_unlock(&ctrl->mbox_lock);
 	return status;
 }
 
@@ -572,7 +757,7 @@ int be_cmd_if_destroy(struct be_ctrl_info *ctrl, u32 interface_id)
 	struct be_cmd_req_if_destroy *req = embedded_payload(wrb);
 	int status;
 
-	spin_lock(&ctrl->cmd_lock);
+	spin_lock(&ctrl->mbox_lock);
 	memset(wrb, 0, sizeof(*wrb));
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -583,7 +768,7 @@ int be_cmd_if_destroy(struct be_ctrl_info *ctrl, u32 interface_id)
 	req->interface_id = cpu_to_le32(interface_id);
 	status = be_mbox_db_ring(ctrl);
 
-	spin_unlock(&ctrl->cmd_lock);
+	spin_unlock(&ctrl->mbox_lock);
 
 	return status;
 }
@@ -598,7 +783,7 @@ int be_cmd_get_stats(struct be_ctrl_info *ctrl, struct be_dma_mem *nonemb_cmd)
 	struct be_sge *sge = nonembedded_sgl(wrb);
 	int status;
 
-	spin_lock(&ctrl->cmd_lock);
+	spin_lock(&ctrl->mbox_lock);
 	memset(wrb, 0, sizeof(*wrb));
 
 	memset(req, 0, sizeof(*req));
@@ -617,18 +802,20 @@ int be_cmd_get_stats(struct be_ctrl_info *ctrl, struct be_dma_mem *nonemb_cmd)
 		be_dws_le_to_cpu(&resp->hw_stats, sizeof(resp->hw_stats));
 	}
 
-	spin_unlock(&ctrl->cmd_lock);
+	spin_unlock(&ctrl->mbox_lock);
 	return status;
 }
 
 int be_cmd_link_status_query(struct be_ctrl_info *ctrl,
-			struct be_link_info *link)
+			bool *link_up)
 {
 	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
 	struct be_cmd_req_link_status *req = embedded_payload(wrb);
 	int status;
 
-	spin_lock(&ctrl->cmd_lock);
+	spin_lock(&ctrl->mbox_lock);
+
+	*link_up = false;
 	memset(wrb, 0, sizeof(*wrb));
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -639,14 +826,11 @@ int be_cmd_link_status_query(struct be_ctrl_info *ctrl,
 	status = be_mbox_db_ring(ctrl);
 	if (!status) {
 		struct be_cmd_resp_link_status *resp = embedded_payload(wrb);
-		link->speed = resp->mac_speed;
-		link->duplex = resp->mac_duplex;
-		link->fault = resp->mac_fault;
-	} else {
-		link->speed = PHY_LINK_SPEED_ZERO;
+		if (resp->mac_speed != PHY_LINK_SPEED_ZERO)
+			*link_up = true;
 	}
 
-	spin_unlock(&ctrl->cmd_lock);
+	spin_unlock(&ctrl->mbox_lock);
 	return status;
 }
 
@@ -656,7 +840,7 @@ int be_cmd_get_fw_ver(struct be_ctrl_info *ctrl, char *fw_ver)
 	struct be_cmd_req_get_fw_version *req = embedded_payload(wrb);
 	int status;
 
-	spin_lock(&ctrl->cmd_lock);
+	spin_lock(&ctrl->mbox_lock);
 	memset(wrb, 0, sizeof(*wrb));
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -670,7 +854,7 @@ int be_cmd_get_fw_ver(struct be_ctrl_info *ctrl, char *fw_ver)
 		strncpy(fw_ver, resp->firmware_version_string, FW_VER_LEN);
 	}
 
-	spin_unlock(&ctrl->cmd_lock);
+	spin_unlock(&ctrl->mbox_lock);
 	return status;
 }
 
@@ -681,7 +865,7 @@ int be_cmd_modify_eqd(struct be_ctrl_info *ctrl, u32 eq_id, u32 eqd)
 	struct be_cmd_req_modify_eq_delay *req = embedded_payload(wrb);
 	int status;
 
-	spin_lock(&ctrl->cmd_lock);
+	spin_lock(&ctrl->mbox_lock);
 	memset(wrb, 0, sizeof(*wrb));
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -696,7 +880,7 @@ int be_cmd_modify_eqd(struct be_ctrl_info *ctrl, u32 eq_id, u32 eqd)
 
 	status = be_mbox_db_ring(ctrl);
 
-	spin_unlock(&ctrl->cmd_lock);
+	spin_unlock(&ctrl->mbox_lock);
 	return status;
 }
 
@@ -707,7 +891,7 @@ int be_cmd_vlan_config(struct be_ctrl_info *ctrl, u32 if_id, u16 *vtag_array,
 	struct be_cmd_req_vlan_config *req = embedded_payload(wrb);
 	int status;
 
-	spin_lock(&ctrl->cmd_lock);
+	spin_lock(&ctrl->mbox_lock);
 	memset(wrb, 0, sizeof(*wrb));
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -726,18 +910,22 @@ int be_cmd_vlan_config(struct be_ctrl_info *ctrl, u32 if_id, u16 *vtag_array,
 
 	status = be_mbox_db_ring(ctrl);
 
-	spin_unlock(&ctrl->cmd_lock);
+	spin_unlock(&ctrl->mbox_lock);
 	return status;
 }
 
+/* Use MCC for this command as it may be called in BH context */
 int be_cmd_promiscuous_config(struct be_ctrl_info *ctrl, u8 port_num, bool en)
 {
-	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
-	struct be_cmd_req_promiscuous_config *req = embedded_payload(wrb);
-	int status;
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_promiscuous_config *req;
 
-	spin_lock(&ctrl->cmd_lock);
-	memset(wrb, 0, sizeof(*wrb));
+	spin_lock_bh(&ctrl->mcc_lock);
+
+	wrb = wrb_from_mcc(&ctrl->mcc_obj.q);
+	BUG_ON(!wrb);
+
+	req = embedded_payload(wrb);
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
 
@@ -749,21 +937,29 @@ int be_cmd_promiscuous_config(struct be_ctrl_info *ctrl, u8 port_num, bool en)
 	else
 		req->port0_promiscuous = en;
 
-	status = be_mbox_db_ring(ctrl);
+	be_mcc_notify_wait(ctrl);
 
-	spin_unlock(&ctrl->cmd_lock);
-	return status;
+	spin_unlock_bh(&ctrl->mcc_lock);
+	return 0;
 }
 
-int be_cmd_mcast_mac_set(struct be_ctrl_info *ctrl, u32 if_id, u8 *mac_table,
-			u32 num, bool promiscuous)
+/*
+ * Use MCC for this command as it may be called in BH context
+ * (mc == NULL) => multicast promiscous
+ */
+int be_cmd_multicast_set(struct be_ctrl_info *ctrl, u32 if_id,
+		struct dev_mc_list *mc_list, u32 mc_count)
 {
-	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
-	struct be_cmd_req_mcast_mac_config *req = embedded_payload(wrb);
-	int status;
+#define BE_MAX_MC		32 /* set mcast promisc if > 32 */
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_mcast_mac_config *req;
 
-	spin_lock(&ctrl->cmd_lock);
-	memset(wrb, 0, sizeof(*wrb));
+	spin_lock_bh(&ctrl->mcc_lock);
+
+	wrb = wrb_from_mcc(&ctrl->mcc_obj.q);
+	BUG_ON(!wrb);
+
+	req = embedded_payload(wrb);
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
 
@@ -771,17 +967,23 @@ int be_cmd_mcast_mac_set(struct be_ctrl_info *ctrl, u32 if_id, u8 *mac_table,
 		OPCODE_COMMON_NTWK_MULTICAST_SET, sizeof(*req));
 
 	req->interface_id = if_id;
-	req->promiscuous = promiscuous;
-	if (!promiscuous) {
-		req->num_mac = cpu_to_le16(num);
-		if (num)
-			memcpy(req->mac, mac_table, ETH_ALEN * num);
+	if (mc_list && mc_count <= BE_MAX_MC) {
+		int i;
+		struct dev_mc_list *mc;
+
+		req->num_mac = cpu_to_le16(mc_count);
+
+		for (mc = mc_list, i = 0; mc; mc = mc->next, i++)
+			memcpy(req->mac[i].byte, mc->dmi_addr, ETH_ALEN);
+	} else {
+		req->promiscuous = 1;
 	}
 
-	status = be_mbox_db_ring(ctrl);
+	be_mcc_notify_wait(ctrl);
 
-	spin_unlock(&ctrl->cmd_lock);
-	return status;
+	spin_unlock_bh(&ctrl->mcc_lock);
+
+	return 0;
 }
 
 int be_cmd_set_flow_control(struct be_ctrl_info *ctrl, u32 tx_fc, u32 rx_fc)
@@ -790,7 +992,7 @@ int be_cmd_set_flow_control(struct be_ctrl_info *ctrl, u32 tx_fc, u32 rx_fc)
 	struct be_cmd_req_set_flow_control *req = embedded_payload(wrb);
 	int status;
 
-	spin_lock(&ctrl->cmd_lock);
+	spin_lock(&ctrl->mbox_lock);
 
 	memset(wrb, 0, sizeof(*wrb));
 
@@ -804,7 +1006,7 @@ int be_cmd_set_flow_control(struct be_ctrl_info *ctrl, u32 tx_fc, u32 rx_fc)
 
 	status = be_mbox_db_ring(ctrl);
 
-	spin_unlock(&ctrl->cmd_lock);
+	spin_unlock(&ctrl->mbox_lock);
 	return status;
 }
 
@@ -814,7 +1016,7 @@ int be_cmd_get_flow_control(struct be_ctrl_info *ctrl, u32 *tx_fc, u32 *rx_fc)
 	struct be_cmd_req_get_flow_control *req = embedded_payload(wrb);
 	int status;
 
-	spin_lock(&ctrl->cmd_lock);
+	spin_lock(&ctrl->mbox_lock);
 
 	memset(wrb, 0, sizeof(*wrb));
 
@@ -831,7 +1033,7 @@ int be_cmd_get_flow_control(struct be_ctrl_info *ctrl, u32 *tx_fc, u32 *rx_fc)
 		*rx_fc = le16_to_cpu(resp->rx_flow_control);
 	}
 
-	spin_unlock(&ctrl->cmd_lock);
+	spin_unlock(&ctrl->mbox_lock);
 	return status;
 }
 
@@ -841,7 +1043,7 @@ int be_cmd_query_fw_cfg(struct be_ctrl_info *ctrl, u32 *port_num)
 	struct be_cmd_req_query_fw_cfg *req = embedded_payload(wrb);
 	int status;
 
-	spin_lock(&ctrl->cmd_lock);
+	spin_lock(&ctrl->mbox_lock);
 
 	memset(wrb, 0, sizeof(*wrb));
 
@@ -856,6 +1058,6 @@ int be_cmd_query_fw_cfg(struct be_ctrl_info *ctrl, u32 *port_num)
 		*port_num = le32_to_cpu(resp->phys_port);
 	}
 
-	spin_unlock(&ctrl->cmd_lock);
+	spin_unlock(&ctrl->mbox_lock);
 	return status;
 }
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h
index e499e2d5b8c..747626da7b4 100644
--- a/drivers/net/benet/be_cmds.h
+++ b/drivers/net/benet/be_cmds.h
@@ -76,6 +76,34 @@ struct be_mcc_cq_entry {
 	u32 flags;		/* dword 3 */
 };
 
+/* When the async bit of mcc_compl is set, the last 4 bytes of
+ * mcc_compl is interpreted as follows:
+ */
+#define ASYNC_TRAILER_EVENT_CODE_SHIFT	8	/* bits 8 - 15 */
+#define ASYNC_TRAILER_EVENT_CODE_MASK	0xFF
+#define ASYNC_EVENT_CODE_LINK_STATE	0x1
+struct be_async_event_trailer {
+	u32 code;
+};
+
+enum {
+	ASYNC_EVENT_LINK_DOWN 	= 0x0,
+	ASYNC_EVENT_LINK_UP 	= 0x1
+};
+
+/* When the event code of an async trailer is link-state, the mcc_compl
+ * must be interpreted as follows
+ */
+struct be_async_event_link_state {
+	u8 physical_port;
+	u8 port_link_status;
+	u8 port_duplex;
+	u8 port_speed;
+	u8 port_fault;
+	u8 rsvd0[7];
+	struct be_async_event_trailer trailer;
+} __packed;
+
 struct be_mcc_mailbox {
 	struct be_mcc_wrb wrb;
 	struct be_mcc_cq_entry cqe;
@@ -101,6 +129,7 @@ struct be_mcc_mailbox {
 #define OPCODE_COMMON_FIRMWARE_CONFIG			42
 #define OPCODE_COMMON_NTWK_INTERFACE_CREATE 		50
 #define OPCODE_COMMON_NTWK_INTERFACE_DESTROY 		51
+#define OPCODE_COMMON_MCC_DESTROY        		53
 #define OPCODE_COMMON_CQ_DESTROY        		54
 #define OPCODE_COMMON_EQ_DESTROY        		55
 #define OPCODE_COMMON_QUERY_FIRMWARE_CONFIG		58
@@ -269,6 +298,38 @@ struct be_cmd_resp_cq_create {
 	u16 rsvd0;
 } __packed;
 
+/******************** Create MCCQ ***************************/
+/* Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field */
+struct amap_mcc_context {
+	u8 con_index[14];
+	u8 rsvd0[2];
+	u8 ring_size[4];
+	u8 fetch_wrb;
+	u8 fetch_r2t;
+	u8 cq_id[10];
+	u8 prod_index[14];
+	u8 fid[8];
+	u8 pdid[9];
+	u8 valid;
+	u8 rsvd1[32];
+	u8 rsvd2[32];
+} __packed;
+
+struct be_cmd_req_mcc_create {
+	struct be_cmd_req_hdr hdr;
+	u16 num_pages;
+	u16 rsvd0;
+	u8 context[sizeof(struct amap_mcc_context) / 8];
+	struct phys_addr pages[8];
+} __packed;
+
+struct be_cmd_resp_mcc_create {
+	struct be_cmd_resp_hdr hdr;
+	u16 id;
+	u16 rsvd0;
+} __packed;
+
 /******************** Create TxQ ***************************/
 #define BE_ETH_TX_RING_TYPE_STANDARD    	2
 #define BE_ULP1_NUM				1
@@ -341,7 +402,8 @@ enum {
 	QTYPE_EQ = 1,
 	QTYPE_CQ,
 	QTYPE_TXQ,
-	QTYPE_RXQ
+	QTYPE_RXQ,
+	QTYPE_MCCQ
 };
 
 struct be_cmd_req_q_destroy {
@@ -546,12 +608,6 @@ struct be_cmd_req_link_status {
 	u32 rsvd;
 };
 
-struct be_link_info {
-	u8 duplex;
-	u8 speed;
-	u8 fault;
-};
-
 enum {
 	PHY_LINK_DUPLEX_NONE = 0x0,
 	PHY_LINK_DUPLEX_HALF = 0x1,
@@ -657,6 +713,9 @@ extern int be_cmd_cq_create(struct be_ctrl_info *ctrl,
 			struct be_queue_info *cq, struct be_queue_info *eq,
 			bool sol_evts, bool no_delay,
 			int num_cqe_dma_coalesce);
+extern int be_cmd_mccq_create(struct be_ctrl_info *ctrl,
+			struct be_queue_info *mccq,
+			struct be_queue_info *cq);
 extern int be_cmd_txq_create(struct be_ctrl_info *ctrl,
 			struct be_queue_info *txq,
 			struct be_queue_info *cq);
@@ -667,7 +726,7 @@ extern int be_cmd_rxq_create(struct be_ctrl_info *ctrl,
 extern int be_cmd_q_destroy(struct be_ctrl_info *ctrl, struct be_queue_info *q,
 			int type);
 extern int be_cmd_link_status_query(struct be_ctrl_info *ctrl,
-			struct be_link_info *link);
+			bool *link_up);
 extern int be_cmd_reset(struct be_ctrl_info *ctrl);
 extern int be_cmd_get_stats(struct be_ctrl_info *ctrl,
 			struct be_dma_mem *nonemb_cmd);
@@ -679,10 +738,11 @@ extern int be_cmd_vlan_config(struct be_ctrl_info *ctrl, u32 if_id,
 			bool promiscuous);
 extern int be_cmd_promiscuous_config(struct be_ctrl_info *ctrl,
 			u8 port_num, bool en);
-extern int be_cmd_mcast_mac_set(struct be_ctrl_info *ctrl, u32 if_id,
-			u8 *mac_table, u32 num, bool promiscuous);
+extern int be_cmd_multicast_set(struct be_ctrl_info *ctrl, u32 if_id,
+			struct dev_mc_list *mc_list, u32 mc_count);
 extern int be_cmd_set_flow_control(struct be_ctrl_info *ctrl,
 			u32 tx_fc, u32 rx_fc);
 extern int be_cmd_get_flow_control(struct be_ctrl_info *ctrl,
 			u32 *tx_fc, u32 *rx_fc);
 extern int be_cmd_query_fw_cfg(struct be_ctrl_info *ctrl, u32 *port_num);
+extern void be_process_mcc(struct be_ctrl_info *ctrl);
diff --git a/drivers/net/benet/be_hw.h b/drivers/net/benet/be_hw.h
index b132aa4893c..b02e805c1db 100644
--- a/drivers/net/benet/be_hw.h
+++ b/drivers/net/benet/be_hw.h
@@ -61,7 +61,7 @@
 /* Clear the interrupt for this eq */
 #define DB_EQ_CLR_SHIFT			(9)	/* bit 9 */
 /* Must be 1 */
-#define DB_EQ_EVNT_SHIFT			(10)	/* bit 10 */
+#define DB_EQ_EVNT_SHIFT		(10)	/* bit 10 */
 /* Number of event entries processed */
 #define DB_EQ_NUM_POPPED_SHIFT		(16)	/* bits 16 - 28 */
 /* Rearm bit */
@@ -88,6 +88,12 @@
 /* Number of rx frags posted */
 #define DB_RQ_NUM_POSTED_SHIFT		(24)	/* bits 24 - 31 */
 
+/********** MCC door bell ************/
+#define DB_MCCQ_OFFSET 			0x140
+#define DB_MCCQ_RING_ID_MASK		0x7FF	/* bits 0 - 10 */
+/* Number of entries posted */
+#define DB_MCCQ_NUM_POSTED_SHIFT	(16)	/* bits 16 - 29 */
+
 /*
  * BE descriptors: host memory data structures whose formats
  * are hardwired in BE silicon.
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 66bb56874d9..66c10c87f51 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -60,26 +60,6 @@ static int be_queue_alloc(struct be_adapter *adapter, struct be_queue_info *q,
 	return 0;
 }
 
-static inline void *queue_head_node(struct be_queue_info *q)
-{
-	return q->dma_mem.va + q->head * q->entry_size;
-}
-
-static inline void *queue_tail_node(struct be_queue_info *q)
-{
-	return q->dma_mem.va + q->tail * q->entry_size;
-}
-
-static inline void queue_head_inc(struct be_queue_info *q)
-{
-	index_inc(&q->head, q->len);
-}
-
-static inline void queue_tail_inc(struct be_queue_info *q)
-{
-	index_inc(&q->tail, q->len);
-}
-
 static void be_intr_set(struct be_ctrl_info *ctrl, bool enable)
 {
 	u8 __iomem *addr = ctrl->pcicfg + PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET;
@@ -127,7 +107,7 @@ static void be_eq_notify(struct be_ctrl_info *ctrl, u16 qid,
 	iowrite32(val, ctrl->db + DB_EQ_OFFSET);
 }
 
-static void be_cq_notify(struct be_ctrl_info *ctrl, u16 qid,
+void be_cq_notify(struct be_ctrl_info *ctrl, u16 qid,
 		bool arm, u16 num_popped)
 {
 	u32 val = 0;
@@ -234,28 +214,24 @@ static void netdev_stats_update(struct be_adapter *adapter)
 	dev_stats->tx_window_errors = 0;
 }
 
-static void be_link_status_update(struct be_adapter *adapter)
+void be_link_status_update(void *ctxt, bool link_up)
 {
-	struct be_link_info *prev = &adapter->link;
-	struct be_link_info now = { 0 };
+	struct be_adapter *adapter = ctxt;
 	struct net_device *netdev = adapter->netdev;
 
-	be_cmd_link_status_query(&adapter->ctrl, &now);
-
 	/* If link came up or went down */
-	if (now.speed != prev->speed && (now.speed == PHY_LINK_SPEED_ZERO ||
-			prev->speed == PHY_LINK_SPEED_ZERO)) {
-		if (now.speed == PHY_LINK_SPEED_ZERO) {
-			netif_stop_queue(netdev);
-			netif_carrier_off(netdev);
-			printk(KERN_INFO "%s: Link down\n", netdev->name);
-		} else {
+	if (adapter->link_up != link_up) {
+		if (link_up) {
 			netif_start_queue(netdev);
 			netif_carrier_on(netdev);
 			printk(KERN_INFO "%s: Link up\n", netdev->name);
+		} else {
+			netif_stop_queue(netdev);
+			netif_carrier_off(netdev);
+			printk(KERN_INFO "%s: Link down\n", netdev->name);
 		}
+		adapter->link_up = link_up;
 	}
-	*prev = now;
 }
 
 /* Update the EQ delay n BE based on the RX frags consumed / sec */
@@ -569,47 +545,32 @@ static void be_vlan_rem_vid(struct net_device *netdev, u16 vid)
 	be_vid_config(netdev);
 }
 
-static void be_set_multicast_filter(struct net_device *netdev)
+static void be_set_multicast_list(struct net_device *netdev)
 {
 	struct be_adapter *adapter = netdev_priv(netdev);
-	struct dev_mc_list *mc_ptr;
-	u8 mac_addr[32][ETH_ALEN];
-	int i = 0;
+	struct be_ctrl_info *ctrl = &adapter->ctrl;
 
-	if (netdev->flags & IFF_ALLMULTI) {
-		/* set BE in Multicast promiscuous */
-		be_cmd_mcast_mac_set(&adapter->ctrl,
-					adapter->if_handle, NULL, 0, true);
-		return;
+	if (netdev->flags & IFF_PROMISC) {
+		be_cmd_promiscuous_config(ctrl, adapter->port_num, 1);
+		adapter->promiscuous = true;
+		goto done;
 	}
 
-	for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
-		memcpy(&mac_addr[i][0], mc_ptr->dmi_addr, ETH_ALEN);
-		if (++i >= 32) {
-			be_cmd_mcast_mac_set(&adapter->ctrl,
-				adapter->if_handle, &mac_addr[0][0], i, false);
-			i = 0;
-		}
-
+	/* BE was previously in promiscous mode; disable it */
+	if (adapter->promiscuous) {
+		adapter->promiscuous = false;
+		be_cmd_promiscuous_config(ctrl, adapter->port_num, 0);
 	}
 
-	if (i) {
-		/* reset the promiscuous mode also. */
-		be_cmd_mcast_mac_set(&adapter->ctrl,
-			adapter->if_handle, &mac_addr[0][0], i, false);
+	if (netdev->flags & IFF_ALLMULTI) {
+		be_cmd_multicast_set(ctrl, adapter->if_handle, NULL, 0);
+		goto done;
 	}
-}
 
-static void be_set_multicast_list(struct net_device *netdev)
-{
-	struct be_adapter *adapter = netdev_priv(netdev);
-
-	if (netdev->flags & IFF_PROMISC) {
-		be_cmd_promiscuous_config(&adapter->ctrl, adapter->port_num, 1);
-	} else {
-		be_cmd_promiscuous_config(&adapter->ctrl, adapter->port_num, 0);
-		be_set_multicast_filter(netdev);
-	}
+	be_cmd_multicast_set(ctrl, adapter->if_handle, netdev->mc_list,
+		netdev->mc_count);
+done:
+	return;
 }
 
 static void be_rx_rate_update(struct be_adapter *adapter)
@@ -960,10 +921,8 @@ static void be_post_rx_frags(struct be_adapter *adapter)
 	return;
 }
 
-static struct be_eth_tx_compl *
-be_tx_compl_get(struct be_adapter *adapter)
+static struct be_eth_tx_compl *be_tx_compl_get(struct be_queue_info *tx_cq)
 {
-	struct be_queue_info *tx_cq = &adapter->tx_obj.cq;
 	struct be_eth_tx_compl *txcp = queue_tail_node(tx_cq);
 
 	if (txcp->dw[offsetof(struct amap_eth_tx_compl, valid) / 32] == 0)
@@ -1051,6 +1010,59 @@ static void be_tx_q_clean(struct be_adapter *adapter)
 	}
 }
 
+static void be_mcc_queues_destroy(struct be_adapter *adapter)
+{
+	struct be_queue_info *q;
+	struct be_ctrl_info *ctrl = &adapter->ctrl;
+
+	q = &ctrl->mcc_obj.q;
+	if (q->created)
+		be_cmd_q_destroy(ctrl, q, QTYPE_MCCQ);
+	be_queue_free(adapter, q);
+
+	q = &ctrl->mcc_obj.cq;
+	if (q->created)
+		be_cmd_q_destroy(ctrl, q, QTYPE_CQ);
+	be_queue_free(adapter, q);
+}
+
+/* Must be called only after TX qs are created as MCC shares TX EQ */
+static int be_mcc_queues_create(struct be_adapter *adapter)
+{
+	struct be_queue_info *q, *cq;
+	struct be_ctrl_info *ctrl = &adapter->ctrl;
+
+	/* Alloc MCC compl queue */
+	cq = &ctrl->mcc_obj.cq;
+	if (be_queue_alloc(adapter, cq, MCC_CQ_LEN,
+			sizeof(struct be_mcc_cq_entry)))
+		goto err;
+
+	/* Ask BE to create MCC compl queue; share TX's eq */
+	if (be_cmd_cq_create(ctrl, cq, &adapter->tx_eq.q, false, true, 0))
+		goto mcc_cq_free;
+
+	/* Alloc MCC queue */
+	q = &ctrl->mcc_obj.q;
+	if (be_queue_alloc(adapter, q, MCC_Q_LEN, sizeof(struct be_mcc_wrb)))
+		goto mcc_cq_destroy;
+
+	/* Ask BE to create MCC queue */
+	if (be_cmd_mccq_create(ctrl, q, cq))
+		goto mcc_q_free;
+
+	return 0;
+
+mcc_q_free:
+	be_queue_free(adapter, q);
+mcc_cq_destroy:
+	be_cmd_q_destroy(ctrl, cq, QTYPE_CQ);
+mcc_cq_free:
+	be_queue_free(adapter, cq);
+err:
+	return -1;
+}
+
 static void be_tx_queues_destroy(struct be_adapter *adapter)
 {
 	struct be_queue_info *q;
@@ -1263,7 +1275,7 @@ static irqreturn_t be_msix_rx(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t be_msix_tx(int irq, void *dev)
+static irqreturn_t be_msix_tx_mcc(int irq, void *dev)
 {
 	struct be_adapter *adapter = dev;
 
@@ -1324,40 +1336,51 @@ int be_poll_rx(struct napi_struct *napi, int budget)
 	return work_done;
 }
 
-/* For TX we don't honour budget; consume everything */
-int be_poll_tx(struct napi_struct *napi, int budget)
+void be_process_tx(struct be_adapter *adapter)
 {
-	struct be_eq_obj *tx_eq = container_of(napi, struct be_eq_obj, napi);
-	struct be_adapter *adapter =
-		container_of(tx_eq, struct be_adapter, tx_eq);
-	struct be_tx_obj *tx_obj = &adapter->tx_obj;
-	struct be_queue_info *tx_cq = &tx_obj->cq;
-	struct be_queue_info *txq = &tx_obj->q;
+	struct be_queue_info *txq = &adapter->tx_obj.q;
+	struct be_queue_info *tx_cq = &adapter->tx_obj.cq;
 	struct be_eth_tx_compl *txcp;
 	u32 num_cmpl = 0;
 	u16 end_idx;
 
-	while ((txcp = be_tx_compl_get(adapter))) {
+	while ((txcp = be_tx_compl_get(tx_cq))) {
 		end_idx = AMAP_GET_BITS(struct amap_eth_tx_compl,
 					wrb_index, txcp);
 		be_tx_compl_process(adapter, end_idx);
 		num_cmpl++;
 	}
 
-	/* As Tx wrbs have been freed up, wake up netdev queue if
-	 * it was stopped due to lack of tx wrbs.
-	 */
-	if (netif_queue_stopped(adapter->netdev) &&
+	if (num_cmpl) {
+		be_cq_notify(&adapter->ctrl, tx_cq->id, true, num_cmpl);
+
+		/* As Tx wrbs have been freed up, wake up netdev queue if
+		 * it was stopped due to lack of tx wrbs.
+		 */
+		if (netif_queue_stopped(adapter->netdev) &&
 			atomic_read(&txq->used) < txq->len / 2) {
-		netif_wake_queue(adapter->netdev);
+			netif_wake_queue(adapter->netdev);
+		}
+
+		drvr_stats(adapter)->be_tx_events++;
+		drvr_stats(adapter)->be_tx_compl += num_cmpl;
 	}
+}
+
+/* As TX and MCC share the same EQ check for both TX and MCC completions.
+ * For TX/MCC we don't honour budget; consume everything
+ */
+static int be_poll_tx_mcc(struct napi_struct *napi, int budget)
+{
+	struct be_eq_obj *tx_eq = container_of(napi, struct be_eq_obj, napi);
+	struct be_adapter *adapter =
+		container_of(tx_eq, struct be_adapter, tx_eq);
 
 	napi_complete(napi);
 
-	be_cq_notify(&adapter->ctrl, tx_cq->id, true, num_cmpl);
+	be_process_tx(adapter);
 
-	drvr_stats(adapter)->be_tx_events++;
-	drvr_stats(adapter)->be_tx_compl += num_cmpl;
+	be_process_mcc(&adapter->ctrl);
 
 	return 1;
 }
@@ -1368,9 +1391,6 @@ static void be_worker(struct work_struct *work)
 		container_of(work, struct be_adapter, work.work);
 	int status;
 
-	/* Check link */
-	be_link_status_update(adapter);
-
 	/* Get Stats */
 	status = be_cmd_get_stats(&adapter->ctrl, &adapter->stats.cmd);
 	if (!status)
@@ -1419,7 +1439,7 @@ static int be_msix_register(struct be_adapter *adapter)
 
 	sprintf(tx_eq->desc, "%s-tx", netdev->name);
 	vec = be_msix_vec_get(adapter, tx_eq->q.id);
-	status = request_irq(vec, be_msix_tx, 0, tx_eq->desc, adapter);
+	status = request_irq(vec, be_msix_tx_mcc, 0, tx_eq->desc, adapter);
 	if (status)
 		goto err;
 
@@ -1495,6 +1515,39 @@ static int be_open(struct net_device *netdev)
 	struct be_ctrl_info *ctrl = &adapter->ctrl;
 	struct be_eq_obj *rx_eq = &adapter->rx_eq;
 	struct be_eq_obj *tx_eq = &adapter->tx_eq;
+	bool link_up;
+	int status;
+
+	/* First time posting */
+	be_post_rx_frags(adapter);
+
+	napi_enable(&rx_eq->napi);
+	napi_enable(&tx_eq->napi);
+
+	be_irq_register(adapter);
+
+	be_intr_set(ctrl, true);
+
+	/* The evt queues are created in unarmed state; arm them */
+	be_eq_notify(ctrl, rx_eq->q.id, true, false, 0);
+	be_eq_notify(ctrl, tx_eq->q.id, true, false, 0);
+
+	/* Rx compl queue may be in unarmed state; rearm it */
+	be_cq_notify(ctrl, adapter->rx_obj.cq.id, true, 0);
+
+	status = be_cmd_link_status_query(ctrl, &link_up);
+	if (status)
+		return status;
+	be_link_status_update(adapter, link_up);
+
+	schedule_delayed_work(&adapter->work, msecs_to_jiffies(100));
+	return 0;
+}
+
+static int be_setup(struct be_adapter *adapter)
+{
+	struct be_ctrl_info *ctrl = &adapter->ctrl;
+	struct net_device *netdev = adapter->netdev;
 	u32 if_flags;
 	int status;
 
@@ -1521,29 +1574,14 @@ static int be_open(struct net_device *netdev)
 	if (status != 0)
 		goto tx_qs_destroy;
 
-	/* First time posting */
-	be_post_rx_frags(adapter);
-
-	napi_enable(&rx_eq->napi);
-	napi_enable(&tx_eq->napi);
-
-	be_irq_register(adapter);
-
-	be_intr_set(ctrl, true);
-
-	/* The evt queues are created in the unarmed state; arm them */
-	be_eq_notify(ctrl, rx_eq->q.id, true, false, 0);
-	be_eq_notify(ctrl, tx_eq->q.id, true, false, 0);
-
-	/* The compl queues are created in the unarmed state; arm them */
-	be_cq_notify(ctrl, adapter->rx_obj.cq.id, true, 0);
-	be_cq_notify(ctrl, adapter->tx_obj.cq.id, true, 0);
-
-	be_link_status_update(adapter);
+	status = be_mcc_queues_create(adapter);
+	if (status != 0)
+		goto rx_qs_destroy;
 
-	schedule_delayed_work(&adapter->work, msecs_to_jiffies(100));
 	return 0;
 
+rx_qs_destroy:
+	be_rx_queues_destroy(adapter);
 tx_qs_destroy:
 	be_tx_queues_destroy(adapter);
 if_destroy:
@@ -1552,6 +1590,19 @@ do_none:
 	return status;
 }
 
+static int be_clear(struct be_adapter *adapter)
+{
+	struct be_ctrl_info *ctrl = &adapter->ctrl;
+
+	be_rx_queues_destroy(adapter);
+	be_tx_queues_destroy(adapter);
+
+	be_cmd_if_destroy(ctrl, adapter->if_handle);
+
+	be_mcc_queues_destroy(adapter);
+	return 0;
+}
+
 static int be_close(struct net_device *netdev)
 {
 	struct be_adapter *adapter = netdev_priv(netdev);
@@ -1564,7 +1615,7 @@ static int be_close(struct net_device *netdev)
 
 	netif_stop_queue(netdev);
 	netif_carrier_off(netdev);
-	adapter->link.speed = PHY_LINK_SPEED_ZERO;
+	adapter->link_up = false;
 
 	be_intr_set(ctrl, false);
 
@@ -1581,10 +1632,6 @@ static int be_close(struct net_device *netdev)
 	napi_disable(&rx_eq->napi);
 	napi_disable(&tx_eq->napi);
 
-	be_rx_queues_destroy(adapter);
-	be_tx_queues_destroy(adapter);
-
-	be_cmd_if_destroy(ctrl, adapter->if_handle);
 	return 0;
 }
 
@@ -1673,7 +1720,7 @@ static void be_netdev_init(struct net_device *netdev)
 
 	netif_napi_add(netdev, &adapter->rx_eq.napi, be_poll_rx,
 		BE_NAPI_WEIGHT);
-	netif_napi_add(netdev, &adapter->tx_eq.napi, be_poll_tx,
+	netif_napi_add(netdev, &adapter->tx_eq.napi, be_poll_tx_mcc,
 		BE_NAPI_WEIGHT);
 
 	netif_carrier_off(netdev);
@@ -1755,7 +1802,12 @@ static int be_ctrl_init(struct be_adapter *adapter)
 	mbox_mem_align->va = PTR_ALIGN(mbox_mem_alloc->va, 16);
 	mbox_mem_align->dma = PTR_ALIGN(mbox_mem_alloc->dma, 16);
 	memset(mbox_mem_align->va, 0, sizeof(struct be_mcc_mailbox));
-	spin_lock_init(&ctrl->cmd_lock);
+	spin_lock_init(&ctrl->mbox_lock);
+	spin_lock_init(&ctrl->mcc_lock);
+	spin_lock_init(&ctrl->mcc_cq_lock);
+
+	ctrl->async_cb = be_link_status_update;
+	ctrl->adapter_ctxt = adapter;
 
 	val = ioread32(ctrl->pcicfg + PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET);
 	ctrl->pci_func = (val >> MEMBAR_CTRL_INT_CTRL_PFUNC_SHIFT) &
@@ -1793,6 +1845,8 @@ static void __devexit be_remove(struct pci_dev *pdev)
 
 	unregister_netdev(adapter->netdev);
 
+	be_clear(adapter);
+
 	be_stats_cleanup(adapter);
 
 	be_ctrl_cleanup(adapter);
@@ -1890,13 +1944,18 @@ static int __devinit be_probe(struct pci_dev *pdev,
 	be_netdev_init(netdev);
 	SET_NETDEV_DEV(netdev, &adapter->pdev->dev);
 
+	status = be_setup(adapter);
+	if (status)
+		goto stats_clean;
 	status = register_netdev(netdev);
 	if (status != 0)
-		goto stats_clean;
+		goto unsetup;
 
 	dev_info(&pdev->dev, "%s port %d\n", nic_name(pdev), adapter->port_num);
 	return 0;
 
+unsetup:
+	be_clear(adapter);
 stats_clean:
 	be_stats_cleanup(adapter);
 ctrl_clean:
@@ -1921,6 +1980,7 @@ static int be_suspend(struct pci_dev *pdev, pm_message_t state)
 	if (netif_running(netdev)) {
 		rtnl_lock();
 		be_close(netdev);
+		be_clear(adapter);
 		rtnl_unlock();
 	}
 
@@ -1947,6 +2007,7 @@ static int be_resume(struct pci_dev *pdev)
 
 	if (netif_running(netdev)) {
 		rtnl_lock();
+		be_setup(adapter);
 		be_open(netdev);
 		rtnl_unlock();
 	}
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 7e3738112c4..38f1c3375d7 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -3552,14 +3552,14 @@ bnx2_set_rx_mode(struct net_device *dev)
 		sort_mode |= BNX2_RPM_SORT_USER0_MC_HSH_EN;
 	}
 
-	if (dev->uc_count > BNX2_MAX_UNICAST_ADDRESSES) {
+	if (dev->uc.count > BNX2_MAX_UNICAST_ADDRESSES) {
 		rx_mode |= BNX2_EMAC_RX_MODE_PROMISCUOUS;
 		sort_mode |= BNX2_RPM_SORT_USER0_PROM_EN |
 			     BNX2_RPM_SORT_USER0_PROM_VLAN;
 	} else if (!(dev->flags & IFF_PROMISC)) {
 		/* Add all entries into to the match filter list */
 		i = 0;
-		list_for_each_entry(ha, &dev->uc_list, list) {
+		list_for_each_entry(ha, &dev->uc.list, list) {
 			bnx2_set_mac_addr(bp, ha->addr,
 					  i + BNX2_START_UNICAST_ADDRESS_INDEX);
 			sort_mode |= (1 <<
diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
index 44f77eb1180..4d1515f45ba 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/cnic.c
@@ -25,8 +25,6 @@
 #include <linux/delay.h>
 #include <linux/ethtool.h>
 #include <linux/if_vlan.h>
-#include <linux/module.h>
-
 #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
 #define BCM_VLAN 1
 #endif
@@ -2521,9 +2519,9 @@ static struct cnic_dev *init_bnx2_cnic(struct net_device *dev)
 	struct cnic_dev *cdev;
 	struct cnic_local *cp;
 	struct cnic_eth_dev *ethdev = NULL;
-	struct cnic_eth_dev *(*probe)(void *) = NULL;
+	struct cnic_eth_dev *(*probe)(struct net_device *) = NULL;
 
-	probe = __symbol_get("bnx2_cnic_probe");
+	probe = symbol_get(bnx2_cnic_probe);
 	if (probe) {
 		ethdev = (*probe)(dev);
 		symbol_put_addr(probe);
diff --git a/drivers/net/cnic_if.h b/drivers/net/cnic_if.h
index 06380963a34..d1bce27ee99 100644
--- a/drivers/net/cnic_if.h
+++ b/drivers/net/cnic_if.h
@@ -296,4 +296,6 @@ extern int cnic_register_driver(int ulp_type, struct cnic_ulp_ops *ulp_ops);
 
 extern int cnic_unregister_driver(int ulp_type);
 
+extern struct cnic_eth_dev *bnx2_cnic_probe(struct net_device *dev);
+
 #endif
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 0e9b9f9632c..2df8fb0af70 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -2767,7 +2767,6 @@ static int __devexit davinci_emac_remove(struct platform_device *pdev)
 
 	dev_notice(&ndev->dev, "DaVinci EMAC: davinci_emac_remove()\n");
 
-	clk_disable(emac_clk);
 	platform_set_drvdata(pdev, NULL);
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	mdiobus_unregister(priv->mii_bus);
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index f7929e89eb0..efa680f4b8d 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -2895,12 +2895,13 @@ static void __e100_shutdown(struct pci_dev *pdev, bool *enable_wake)
 
 static int __e100_power_off(struct pci_dev *pdev, bool wake)
 {
-	if (wake) {
+	if (wake)
 		return pci_prepare_to_sleep(pdev);
-	} else {
-		pci_wake_from_d3(pdev, false);
-		return pci_set_power_state(pdev, PCI_D3hot);
-	}
+
+	pci_wake_from_d3(pdev, false);
+	pci_set_power_state(pdev, PCI_D3hot);
+
+	return 0;
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 8d36743c814..5e3356f8eb5 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -2370,7 +2370,7 @@ static void e1000_set_rx_mode(struct net_device *netdev)
 			rctl |= E1000_RCTL_VFE;
 	}
 
-	if (netdev->uc_count > rar_entries - 1) {
+	if (netdev->uc.count > rar_entries - 1) {
 		rctl |= E1000_RCTL_UPE;
 	} else if (!(netdev->flags & IFF_PROMISC)) {
 		rctl &= ~E1000_RCTL_UPE;
@@ -2394,7 +2394,7 @@ static void e1000_set_rx_mode(struct net_device *netdev)
 	 */
 	i = 1;
 	if (use_uc)
-		list_for_each_entry(ha, &netdev->uc_list, list) {
+		list_for_each_entry(ha, &netdev->uc.list, list) {
 			if (i == rar_entries)
 				break;
 			e1000_rar_set(hw, ha->addr, i++);
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 677f60490f6..679885a122b 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -1997,7 +1997,7 @@ static int e1000_clean(struct napi_struct *napi, int budget)
 	struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
 	struct e1000_hw *hw = &adapter->hw;
 	struct net_device *poll_dev = adapter->netdev;
-	int tx_cleaned = 0, work_done = 0;
+	int tx_cleaned = 1, work_done = 0;
 
 	adapter = netdev_priv(poll_dev);
 
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index 7d443405bbe..cc786333d95 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -948,7 +948,7 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
 	/* Start with safe defaults for link connection */
 	priv->speed = 100;
 	priv->duplex = DUPLEX_HALF;
-	priv->mdio_speed = ((mpc52xx_find_ipb_freq(op->node) >> 20) / 5) << 1;
+	priv->mdio_speed = ((mpc5xxx_get_bus_frequency(op->node) >> 20) / 5) << 1;
 
 	/* The current speed preconfigures the speed of the MII link */
 	prop = of_get_property(op->node, "current-speed", &prop_size);
diff --git a/drivers/net/fec_mpc52xx_phy.c b/drivers/net/fec_mpc52xx_phy.c
index fec9f245116..31e6d62b785 100644
--- a/drivers/net/fec_mpc52xx_phy.c
+++ b/drivers/net/fec_mpc52xx_phy.c
@@ -106,7 +106,7 @@ static int mpc52xx_fec_mdio_probe(struct of_device *of,
 
 	/* set MII speed */
 	out_be32(&priv->regs->mii_speed,
-		((mpc52xx_find_ipb_freq(of->node) >> 20) / 5) << 1);
+		((mpc5xxx_get_bus_frequency(of->node) >> 20) / 5) << 1);
 
 	err = of_mdiobus_register(bus, np);
 	if (err)
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index b60a3041b64..1094d292630 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -719,7 +719,8 @@ static const struct register_test nv_registers_test[] = {
 struct nv_skb_map {
 	struct sk_buff *skb;
 	dma_addr_t dma;
-	unsigned int dma_len;
+	unsigned int dma_len:31;
+	unsigned int dma_single:1;
 	struct ring_desc_ex *first_tx_desc;
 	struct nv_skb_map *next_tx_ctx;
 };
@@ -1912,6 +1913,7 @@ static void nv_init_tx(struct net_device *dev)
 		np->tx_skb[i].skb = NULL;
 		np->tx_skb[i].dma = 0;
 		np->tx_skb[i].dma_len = 0;
+		np->tx_skb[i].dma_single = 0;
 		np->tx_skb[i].first_tx_desc = NULL;
 		np->tx_skb[i].next_tx_ctx = NULL;
 	}
@@ -1930,23 +1932,30 @@ static int nv_init_ring(struct net_device *dev)
 		return nv_alloc_rx_optimized(dev);
 }
 
-static int nv_release_txskb(struct net_device *dev, struct nv_skb_map* tx_skb)
+static void nv_unmap_txskb(struct fe_priv *np, struct nv_skb_map *tx_skb)
 {
-	struct fe_priv *np = netdev_priv(dev);
-
 	if (tx_skb->dma) {
-		pci_unmap_page(np->pci_dev, tx_skb->dma,
-			       tx_skb->dma_len,
-			       PCI_DMA_TODEVICE);
+		if (tx_skb->dma_single)
+			pci_unmap_single(np->pci_dev, tx_skb->dma,
+					 tx_skb->dma_len,
+					 PCI_DMA_TODEVICE);
+		else
+			pci_unmap_page(np->pci_dev, tx_skb->dma,
+				       tx_skb->dma_len,
+				       PCI_DMA_TODEVICE);
 		tx_skb->dma = 0;
 	}
+}
+
+static int nv_release_txskb(struct fe_priv *np, struct nv_skb_map *tx_skb)
+{
+	nv_unmap_txskb(np, tx_skb);
 	if (tx_skb->skb) {
 		dev_kfree_skb_any(tx_skb->skb);
 		tx_skb->skb = NULL;
 		return 1;
-	} else {
-		return 0;
 	}
+	return 0;
 }
 
 static void nv_drain_tx(struct net_device *dev)
@@ -1964,10 +1973,11 @@ static void nv_drain_tx(struct net_device *dev)
 			np->tx_ring.ex[i].bufhigh = 0;
 			np->tx_ring.ex[i].buflow = 0;
 		}
-		if (nv_release_txskb(dev, &np->tx_skb[i]))
+		if (nv_release_txskb(np, &np->tx_skb[i]))
 			dev->stats.tx_dropped++;
 		np->tx_skb[i].dma = 0;
 		np->tx_skb[i].dma_len = 0;
+		np->tx_skb[i].dma_single = 0;
 		np->tx_skb[i].first_tx_desc = NULL;
 		np->tx_skb[i].next_tx_ctx = NULL;
 	}
@@ -2171,6 +2181,7 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		np->put_tx_ctx->dma = pci_map_single(np->pci_dev, skb->data + offset, bcnt,
 						PCI_DMA_TODEVICE);
 		np->put_tx_ctx->dma_len = bcnt;
+		np->put_tx_ctx->dma_single = 1;
 		put_tx->buf = cpu_to_le32(np->put_tx_ctx->dma);
 		put_tx->flaglen = cpu_to_le32((bcnt-1) | tx_flags);
 
@@ -2196,6 +2207,7 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			np->put_tx_ctx->dma = pci_map_page(np->pci_dev, frag->page, frag->page_offset+offset, bcnt,
 							   PCI_DMA_TODEVICE);
 			np->put_tx_ctx->dma_len = bcnt;
+			np->put_tx_ctx->dma_single = 0;
 			put_tx->buf = cpu_to_le32(np->put_tx_ctx->dma);
 			put_tx->flaglen = cpu_to_le32((bcnt-1) | tx_flags);
 
@@ -2291,6 +2303,7 @@ static int nv_start_xmit_optimized(struct sk_buff *skb, struct net_device *dev)
 		np->put_tx_ctx->dma = pci_map_single(np->pci_dev, skb->data + offset, bcnt,
 						PCI_DMA_TODEVICE);
 		np->put_tx_ctx->dma_len = bcnt;
+		np->put_tx_ctx->dma_single = 1;
 		put_tx->bufhigh = cpu_to_le32(dma_high(np->put_tx_ctx->dma));
 		put_tx->buflow = cpu_to_le32(dma_low(np->put_tx_ctx->dma));
 		put_tx->flaglen = cpu_to_le32((bcnt-1) | tx_flags);
@@ -2317,6 +2330,7 @@ static int nv_start_xmit_optimized(struct sk_buff *skb, struct net_device *dev)
 			np->put_tx_ctx->dma = pci_map_page(np->pci_dev, frag->page, frag->page_offset+offset, bcnt,
 							   PCI_DMA_TODEVICE);
 			np->put_tx_ctx->dma_len = bcnt;
+			np->put_tx_ctx->dma_single = 0;
 			put_tx->bufhigh = cpu_to_le32(dma_high(np->put_tx_ctx->dma));
 			put_tx->buflow = cpu_to_le32(dma_low(np->put_tx_ctx->dma));
 			put_tx->flaglen = cpu_to_le32((bcnt-1) | tx_flags);
@@ -2434,10 +2448,7 @@ static int nv_tx_done(struct net_device *dev, int limit)
 		dprintk(KERN_DEBUG "%s: nv_tx_done: flags 0x%x.\n",
 					dev->name, flags);
 
-		pci_unmap_page(np->pci_dev, np->get_tx_ctx->dma,
-			       np->get_tx_ctx->dma_len,
-			       PCI_DMA_TODEVICE);
-		np->get_tx_ctx->dma = 0;
+		nv_unmap_txskb(np, np->get_tx_ctx);
 
 		if (np->desc_ver == DESC_VER_1) {
 			if (flags & NV_TX_LASTPACKET) {
@@ -2502,10 +2513,7 @@ static int nv_tx_done_optimized(struct net_device *dev, int limit)
 		dprintk(KERN_DEBUG "%s: nv_tx_done_optimized: flags 0x%x.\n",
 					dev->name, flags);
 
-		pci_unmap_page(np->pci_dev, np->get_tx_ctx->dma,
-			       np->get_tx_ctx->dma_len,
-			       PCI_DMA_TODEVICE);
-		np->get_tx_ctx->dma = 0;
+		nv_unmap_txskb(np, np->get_tx_ctx);
 
 		if (flags & NV_TX2_LASTPACKET) {
 			if (!(flags & NV_TX2_ERROR))
@@ -5091,7 +5099,7 @@ static int nv_loopback_test(struct net_device *dev)
 		dprintk(KERN_DEBUG "%s: loopback - did not receive test packet\n", dev->name);
 	}
 
-	pci_unmap_page(np->pci_dev, test_dma_addr,
+	pci_unmap_single(np->pci_dev, test_dma_addr,
 		       (skb_end_pointer(tx_skb) - tx_skb->data),
 		       PCI_DMA_TODEVICE);
 	dev_kfree_skb_any(tx_skb);
diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c
index 5105548ad50..abcd19a8bff 100644
--- a/drivers/net/hamradio/bpqether.c
+++ b/drivers/net/hamradio/bpqether.c
@@ -260,7 +260,7 @@ static int bpq_xmit(struct sk_buff *skb, struct net_device *dev)
 	 */
 	if (!netif_running(dev)) {
 		kfree_skb(skb);
-		return -ENODEV;
+		return NETDEV_TX_OK;
 	}
 
 	skb_pull(skb, 1);
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index 8feda9fe829..1d3429a415e 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -1495,13 +1495,8 @@ static int hp100_start_xmit_bm(struct sk_buff *skb, struct net_device *dev)
 	hp100_outw(0x4210, TRACE);
 	printk("hp100: %s: start_xmit_bm\n", dev->name);
 #endif
-
-	if (skb == NULL) {
-		return 0;
-	}
-
 	if (skb->len <= 0)
-		return 0;
+		goto drop;
 
 	if (lp->chip == HP100_CHIPID_SHASTA && skb_padto(skb, ETH_ZLEN))
 		return 0;
@@ -1514,10 +1509,10 @@ static int hp100_start_xmit_bm(struct sk_buff *skb, struct net_device *dev)
 #endif
 		/* not waited long enough since last tx? */
 		if (time_before(jiffies, dev->trans_start + HZ))
-			return -EAGAIN;
+			goto drop;
 
 		if (hp100_check_lan(dev))
-			return -EIO;
+			goto drop;
 
 		if (lp->lan_type == HP100_LAN_100 && lp->hub_status < 0) {
 			/* we have a 100Mb/s adapter but it isn't connected to hub */
@@ -1551,7 +1546,7 @@ static int hp100_start_xmit_bm(struct sk_buff *skb, struct net_device *dev)
 		}
 
 		dev->trans_start = jiffies;
-		return -EAGAIN;
+		goto drop;
 	}
 
 	/*
@@ -1591,6 +1586,10 @@ static int hp100_start_xmit_bm(struct sk_buff *skb, struct net_device *dev)
 	dev->trans_start = jiffies;
 
 	return 0;
+
+drop:
+	dev_kfree_skb(skb);
+	return NETDEV_TX_OK;
 }
 
 
@@ -1648,16 +1647,11 @@ static int hp100_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	hp100_outw(0x4212, TRACE);
 	printk("hp100: %s: start_xmit\n", dev->name);
 #endif
-
-	if (skb == NULL) {
-		return 0;
-	}
-
 	if (skb->len <= 0)
-		return 0;
+		goto drop;
 
 	if (hp100_check_lan(dev))
-		return -EIO;
+		goto drop;
 
 	/* If there is not enough free memory on the card... */
 	i = hp100_inl(TX_MEM_FREE) & 0x7fffffff;
@@ -1671,7 +1665,7 @@ static int hp100_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			printk("hp100: %s: trans_start timing problem\n",
 			       dev->name);
 #endif
-			return -EAGAIN;
+			goto drop;
 		}
 		if (lp->lan_type == HP100_LAN_100 && lp->hub_status < 0) {
 			/* we have a 100Mb/s adapter but it isn't connected to hub */
@@ -1705,7 +1699,7 @@ static int hp100_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			}
 		}
 		dev->trans_start = jiffies;
-		return -EAGAIN;
+		goto drop;
 	}
 
 	for (i = 0; i < 6000 && (hp100_inb(OPTION_MSW) & HP100_TX_CMD); i++) {
@@ -1759,6 +1753,11 @@ static int hp100_start_xmit(struct sk_buff *skb, struct net_device *dev)
 #endif
 
 	return 0;
+
+drop:
+	dev_kfree_skb(skb);
+	return NETDEV_TX_OK;
+
 }
 
 
diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c
index 22aadb7884f..2bc9d63027d 100644
--- a/drivers/net/igbvf/netdev.c
+++ b/drivers/net/igbvf/netdev.c
@@ -1281,7 +1281,7 @@ static void igbvf_configure_tx(struct igbvf_adapter *adapter)
 	/* Setup the HW Tx Head and Tail descriptor pointers */
 	ew32(TDLEN(0), tx_ring->count * sizeof(union e1000_adv_tx_desc));
 	tdba = tx_ring->dma;
-	ew32(TDBAL(0), (tdba & DMA_32BIT_MASK));
+	ew32(TDBAL(0), (tdba & DMA_BIT_MASK(32)));
 	ew32(TDBAH(0), (tdba >> 32));
 	ew32(TDH(0), 0);
 	ew32(TDT(0), 0);
@@ -1367,7 +1367,7 @@ static void igbvf_configure_rx(struct igbvf_adapter *adapter)
 	 * the Base and Length of the Rx Descriptor Ring
 	 */
 	rdba = rx_ring->dma;
-	ew32(RDBAL(0), (rdba & DMA_32BIT_MASK));
+	ew32(RDBAL(0), (rdba & DMA_BIT_MASK(32)));
 	ew32(RDBAH(0), (rdba >> 32));
 	ew32(RDLEN(0), rx_ring->count * sizeof(union e1000_adv_rx_desc));
 	rx_ring->head = E1000_RDH(0);
@@ -2628,15 +2628,16 @@ static int __devinit igbvf_probe(struct pci_dev *pdev,
 		return err;
 
 	pci_using_dac = 0;
-	err = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
+	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
 	if (!err) {
-		err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
+		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
 		if (!err)
 			pci_using_dac = 1;
 	} else {
-		err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+		err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
 		if (err) {
-			err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+			err = pci_set_consistent_dma_mask(pdev,
+							  DMA_BIT_MASK(32));
 			if (err) {
 				dev_err(&pdev->dev, "No usable DMA "
 				        "configuration, aborting\n");
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c
index 3c3bf1f07b8..fa9f24e2368 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ixgbe/ixgbe_fcoe.c
@@ -251,7 +251,7 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
 	/* program DMA context */
 	hw = &adapter->hw;
 	spin_lock_bh(&fcoe->lock);
-	IXGBE_WRITE_REG(hw, IXGBE_FCPTRL, ddp->udp & DMA_32BIT_MASK);
+	IXGBE_WRITE_REG(hw, IXGBE_FCPTRL, ddp->udp & DMA_BIT_MASK(32));
 	IXGBE_WRITE_REG(hw, IXGBE_FCPTRH, (u64)ddp->udp >> 32);
 	IXGBE_WRITE_REG(hw, IXGBE_FCBUFF, fcbuff);
 	IXGBE_WRITE_REG(hw, IXGBE_FCDMARW, fcdmarw);
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index a551a96ce67..e756e220db3 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -2321,7 +2321,7 @@ static void ixgbe_set_rx_mode(struct net_device *netdev)
 	IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
 
 	/* reprogram secondary unicast list */
-	hw->mac.ops.update_uc_addr_list(hw, &netdev->uc_list);
+	hw->mac.ops.update_uc_addr_list(hw, &netdev->uc.list);
 
 	/* reprogram multicast list */
 	addr_count = netdev->mc_count;
@@ -5261,7 +5261,7 @@ static int ixgbe_ioctl(struct net_device *netdev, struct ifreq *req, int cmd)
 
 /**
  * ixgbe_add_sanmac_netdev - Add the SAN MAC address to the corresponding
- * netdev->dev_addr_list
+ * netdev->dev_addrs
  * @netdev: network interface device structure
  *
  * Returns non-zero on failure
@@ -5282,7 +5282,7 @@ static int ixgbe_add_sanmac_netdev(struct net_device *dev)
 
 /**
  * ixgbe_del_sanmac_netdev - Removes the SAN MAC address to the corresponding
- * netdev->dev_addr_list
+ * netdev->dev_addrs
  * @netdev: network interface device structure
  *
  * Returns non-zero on failure
diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c
index e02bafdd368..93f4abd990a 100644
--- a/drivers/net/mlx4/en_netdev.c
+++ b/drivers/net/mlx4/en_netdev.c
@@ -668,7 +668,7 @@ int mlx4_en_start_port(struct net_device *dev)
 	queue_work(mdev->workqueue, &priv->mcast_task);
 
 	priv->port_up = true;
-	netif_start_queue(dev);
+	netif_tx_start_all_queues(dev);
 	return 0;
 
 mac_err:
@@ -700,14 +700,14 @@ void mlx4_en_stop_port(struct net_device *dev)
 		en_dbg(DRV, priv, "stop port called while port already down\n");
 		return;
 	}
-	netif_stop_queue(dev);
 
 	/* Synchronize with tx routine */
 	netif_tx_lock_bh(dev);
-	priv->port_up = false;
+	netif_tx_stop_all_queues(dev);
 	netif_tx_unlock_bh(dev);
 
 	/* close port*/
+	priv->port_up = false;
 	mlx4_CLOSE_PORT(mdev->dev, priv->port);
 
 	/* Unregister Mac address for the port */
@@ -881,7 +881,6 @@ void mlx4_en_destroy_netdev(struct net_device *dev)
 		mlx4_free_hwq_res(mdev->dev, &priv->res, MLX4_EN_PAGE_SIZE);
 
 	cancel_delayed_work(&priv->stats_task);
-	cancel_delayed_work(&priv->refill_task);
 	/* flush any pending task for this netdev */
 	flush_workqueue(mdev->workqueue);
 
@@ -986,7 +985,6 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	spin_lock_init(&priv->stats_lock);
 	INIT_WORK(&priv->mcast_task, mlx4_en_do_set_multicast);
 	INIT_WORK(&priv->mac_task, mlx4_en_do_set_mac);
-	INIT_DELAYED_WORK(&priv->refill_task, mlx4_en_rx_refill);
 	INIT_WORK(&priv->watchdog_task, mlx4_en_restart);
 	INIT_WORK(&priv->linkstate_task, mlx4_en_linkstate);
 	INIT_DELAYED_WORK(&priv->stats_task, mlx4_en_do_get_stats);
diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c
index 5a14899c1e2..91bdfdfd431 100644
--- a/drivers/net/mlx4/en_rx.c
+++ b/drivers/net/mlx4/en_rx.c
@@ -269,31 +269,6 @@ reduce_rings:
 	return 0;
 }
 
-static int mlx4_en_fill_rx_buf(struct net_device *dev,
-			       struct mlx4_en_rx_ring *ring)
-{
-	struct mlx4_en_priv *priv = netdev_priv(dev);
-	int num = 0;
-	int err;
-
-	while ((u32) (ring->prod - ring->cons) < ring->actual_size) {
-		err = mlx4_en_prepare_rx_desc(priv, ring, ring->prod &
-					      ring->size_mask);
-		if (err) {
-			if (netif_msg_rx_err(priv))
-				en_warn(priv, "Failed preparing rx descriptor\n");
-			priv->port_stats.rx_alloc_failed++;
-			break;
-		}
-		++num;
-		++ring->prod;
-	}
-	if ((u32) (ring->prod - ring->cons) == ring->actual_size)
-		ring->full = 1;
-
-	return num;
-}
-
 static void mlx4_en_free_rx_buf(struct mlx4_en_priv *priv,
 				struct mlx4_en_rx_ring *ring)
 {
@@ -312,42 +287,6 @@ static void mlx4_en_free_rx_buf(struct mlx4_en_priv *priv,
 	}
 }
 
-
-void mlx4_en_rx_refill(struct work_struct *work)
-{
-	struct delayed_work *delay = to_delayed_work(work);
-	struct mlx4_en_priv *priv = container_of(delay, struct mlx4_en_priv,
-						 refill_task);
-	struct mlx4_en_dev *mdev = priv->mdev;
-	struct net_device *dev = priv->dev;
-	struct mlx4_en_rx_ring *ring;
-	int need_refill = 0;
-	int i;
-
-	mutex_lock(&mdev->state_lock);
-	if (!mdev->device_up || !priv->port_up)
-		goto out;
-
-	/* We only get here if there are no receive buffers, so we can't race
-	 * with Rx interrupts while filling buffers */
-	for (i = 0; i < priv->rx_ring_num; i++) {
-		ring = &priv->rx_ring[i];
-		if (ring->need_refill) {
-			if (mlx4_en_fill_rx_buf(dev, ring)) {
-				ring->need_refill = 0;
-				mlx4_en_update_rx_prod_db(ring);
-			} else
-				need_refill = 1;
-		}
-	}
-	if (need_refill)
-		queue_delayed_work(mdev->workqueue, &priv->refill_task, HZ);
-
-out:
-	mutex_unlock(&mdev->state_lock);
-}
-
-
 int mlx4_en_create_rx_ring(struct mlx4_en_priv *priv,
 			   struct mlx4_en_rx_ring *ring, u32 size, u16 stride)
 {
@@ -457,9 +396,6 @@ int mlx4_en_activate_rx_rings(struct mlx4_en_priv *priv)
 			ring_ind--;
 			goto err_allocator;
 		}
-
-		/* Fill Rx buffers */
-		ring->full = 0;
 	}
 	err = mlx4_en_fill_rx_buffers(priv);
 	if (err)
@@ -647,33 +583,6 @@ static struct sk_buff *mlx4_en_rx_skb(struct mlx4_en_priv *priv,
 	return skb;
 }
 
-static void mlx4_en_copy_desc(struct mlx4_en_priv *priv,
-			      struct mlx4_en_rx_ring *ring,
-			      int from, int to, int num)
-{
-	struct skb_frag_struct *skb_frags_from;
-	struct skb_frag_struct *skb_frags_to;
-	struct mlx4_en_rx_desc *rx_desc_from;
-	struct mlx4_en_rx_desc *rx_desc_to;
-	int from_index, to_index;
-	int nr, i;
-
-	for (i = 0; i < num; i++) {
-		from_index = (from + i) & ring->size_mask;
-		to_index = (to + i) & ring->size_mask;
-		skb_frags_from = ring->rx_info + (from_index << priv->log_rx_info);
-		skb_frags_to = ring->rx_info + (to_index << priv->log_rx_info);
-		rx_desc_from = ring->buf + (from_index << ring->log_stride);
-		rx_desc_to = ring->buf + (to_index << ring->log_stride);
-
-		for (nr = 0; nr < priv->num_frags; nr++) {
-			skb_frags_to[nr].page = skb_frags_from[nr].page;
-			skb_frags_to[nr].page_offset = skb_frags_from[nr].page_offset;
-			rx_desc_to->data[nr].addr = rx_desc_from->data[nr].addr;
-		}
-	}
-}
-
 
 int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int budget)
 {
@@ -821,11 +730,6 @@ out:
 	wmb(); /* ensure HW sees CQ consumer before we post new buffers */
 	ring->cons = cq->mcq.cons_index;
 	ring->prod += polled; /* Polled descriptors were realocated in place */
-	if (unlikely(!ring->full)) {
-		mlx4_en_copy_desc(priv, ring, ring->cons - polled,
-				  ring->prod - polled, polled);
-		mlx4_en_fill_rx_buf(dev, ring);
-	}
 	mlx4_en_update_rx_prod_db(ring);
 	return polled;
 }
diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c
index 5dc7466ad03..08c43f2ae72 100644
--- a/drivers/net/mlx4/en_tx.c
+++ b/drivers/net/mlx4/en_tx.c
@@ -515,16 +515,9 @@ static int get_real_size(struct sk_buff *skb, struct net_device *dev,
 			else {
 				if (netif_msg_tx_err(priv))
 					en_warn(priv, "Non-linear headers\n");
-				dev_kfree_skb_any(skb);
 				return 0;
 			}
 		}
-		if (unlikely(*lso_header_size > MAX_LSO_HDR_SIZE)) {
-			if (netif_msg_tx_err(priv))
-				en_warn(priv, "LSO header size too big\n");
-			dev_kfree_skb_any(skb);
-			return 0;
-		}
 	} else {
 		*lso_header_size = 0;
 		if (!is_inline(skb, NULL))
@@ -616,13 +609,9 @@ int mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
 	int lso_header_size;
 	void *fragptr;
 
-	if (unlikely(!skb->len)) {
-		dev_kfree_skb_any(skb);
-		return NETDEV_TX_OK;
-	}
 	real_size = get_real_size(skb, dev, &lso_header_size);
 	if (unlikely(!real_size))
-		return NETDEV_TX_OK;
+		goto tx_drop;
 
 	/* Allign descriptor to TXBB size */
 	desc_size = ALIGN(real_size, TXBB_SIZE);
@@ -630,8 +619,7 @@ int mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (unlikely(nr_txbb > MAX_DESC_TXBBS)) {
 		if (netif_msg_tx_err(priv))
 			en_warn(priv, "Oversized header or SG list\n");
-		dev_kfree_skb_any(skb);
-		return NETDEV_TX_OK;
+		goto tx_drop;
 	}
 
 	tx_ind = skb->queue_mapping;
@@ -653,14 +641,6 @@ int mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
 		return NETDEV_TX_BUSY;
 	}
 
-	/* Now that we know what Tx ring to use */
-	if (unlikely(!priv->port_up)) {
-		if (netif_msg_tx_err(priv))
-			en_warn(priv, "xmit: port down!\n");
-		dev_kfree_skb_any(skb);
-		return NETDEV_TX_OK;
-	}
-
 	/* Track current inflight packets for performance analysis */
 	AVG_PERF_COUNTER(priv->pstats.inflight_avg,
 			 (u32) (ring->prod - ring->cons - 1));
@@ -785,5 +765,10 @@ int mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
 	mlx4_en_xmit_poll(priv, tx_ind);
 
 	return 0;
+
+tx_drop:
+	dev_kfree_skb_any(skb);
+	priv->stats.tx_dropped++;
+	return NETDEV_TX_OK;
 }
 
diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h
index d43a9e4c2ae..c7c5e86804f 100644
--- a/drivers/net/mlx4/mlx4_en.h
+++ b/drivers/net/mlx4/mlx4_en.h
@@ -99,7 +99,6 @@
 #define RSS_FACTOR		2
 #define TXBB_SIZE		64
 #define HEADROOM		(2048 / TXBB_SIZE + 1)
-#define MAX_LSO_HDR_SIZE	92
 #define STAMP_STRIDE		64
 #define STAMP_DWORDS		(STAMP_STRIDE / 4)
 #define STAMP_SHIFT		31
@@ -296,8 +295,6 @@ struct mlx4_en_rx_ring {
 	u32 prod;
 	u32 cons;
 	u32 buf_size;
-	int need_refill;
-	int full;
 	void *buf;
 	void *rx_info;
 	unsigned long bytes;
@@ -495,7 +492,6 @@ struct mlx4_en_priv {
 	struct mlx4_en_cq rx_cq[MAX_RX_RINGS];
 	struct work_struct mcast_task;
 	struct work_struct mac_task;
-	struct delayed_work refill_task;
 	struct work_struct watchdog_task;
 	struct work_struct linkstate_task;
 	struct delayed_work stats_task;
@@ -565,7 +561,6 @@ void mlx4_en_set_default_rss_map(struct mlx4_en_priv *priv,
 int mlx4_en_config_rss_steer(struct mlx4_en_priv *priv);
 void mlx4_en_release_rss_steer(struct mlx4_en_priv *priv);
 int mlx4_en_free_tx_buf(struct net_device *dev, struct mlx4_en_tx_ring *ring);
-void mlx4_en_rx_refill(struct work_struct *work);
 void mlx4_en_rx_irq(struct mlx4_cq *mcq);
 
 int mlx4_SET_MCAST_FLTR(struct mlx4_dev *dev, u8 port, u64 mac, u64 clear, u8 mode);
diff --git a/drivers/net/mlx4/mr.c b/drivers/net/mlx4/mr.c
index 5887e4764d2..f96948be0a4 100644
--- a/drivers/net/mlx4/mr.c
+++ b/drivers/net/mlx4/mr.c
@@ -399,11 +399,14 @@ static int mlx4_write_mtt_chunk(struct mlx4_dev *dev, struct mlx4_mtt *mtt,
 	if (!mtts)
 		return -ENOMEM;
 
+	dma_sync_single_for_cpu(&dev->pdev->dev, dma_handle,
+				npages * sizeof (u64), DMA_TO_DEVICE);
+
 	for (i = 0; i < npages; ++i)
 		mtts[i] = cpu_to_be64(page_list[i] | MLX4_MTT_FLAG_PRESENT);
 
-	dma_sync_single_for_cpu(&dev->pdev->dev, dma_handle,
-				npages * sizeof (u64), DMA_TO_DEVICE);
+	dma_sync_single_for_device(&dev->pdev->dev, dma_handle,
+				   npages * sizeof (u64), DMA_TO_DEVICE);
 
 	return 0;
 }
@@ -547,11 +550,14 @@ int mlx4_map_phys_fmr(struct mlx4_dev *dev, struct mlx4_fmr *fmr, u64 *page_list
 	/* Make sure MPT status is visible before writing MTT entries */
 	wmb();
 
+	dma_sync_single_for_cpu(&dev->pdev->dev, fmr->dma_handle,
+				npages * sizeof(u64), DMA_TO_DEVICE);
+
 	for (i = 0; i < npages; ++i)
 		fmr->mtts[i] = cpu_to_be64(page_list[i] | MLX4_MTT_FLAG_PRESENT);
 
-	dma_sync_single_for_cpu(&dev->pdev->dev, fmr->dma_handle,
-				npages * sizeof(u64), DMA_TO_DEVICE);
+	dma_sync_single_for_device(&dev->pdev->dev, fmr->dma_handle,
+				   npages * sizeof(u64), DMA_TO_DEVICE);
 
 	fmr->mpt->key    = cpu_to_be32(key);
 	fmr->mpt->lkey   = cpu_to_be32(key);
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index b4e18a58cb1..0f32db3e92a 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -1729,7 +1729,7 @@ static u32 uc_addr_filter_mask(struct net_device *dev)
 		return 0;
 
 	nibbles = 1 << (dev->dev_addr[5] & 0x0f);
-	list_for_each_entry(ha, &dev->uc_list, list) {
+	list_for_each_entry(ha, &dev->uc.list, list) {
 		if (memcmp(dev->dev_addr, ha->addr, 5))
 			return 0;
 		if ((dev->dev_addr[5] ^ ha->addr[5]) & 0xf0)
@@ -1750,12 +1750,12 @@ static void mv643xx_eth_program_unicast_filter(struct net_device *dev)
 
 	uc_addr_set(mp, dev->dev_addr);
 
-	port_config = rdlp(mp, PORT_CONFIG);
+	port_config = rdlp(mp, PORT_CONFIG) & ~UNICAST_PROMISCUOUS_MODE;
+
 	nibbles = uc_addr_filter_mask(dev);
 	if (!nibbles) {
 		port_config |= UNICAST_PROMISCUOUS_MODE;
-		wrlp(mp, PORT_CONFIG, port_config);
-		return;
+		nibbles = 0xffff;
 	}
 
 	for (i = 0; i < 16; i += 4) {
@@ -1776,7 +1776,6 @@ static void mv643xx_eth_program_unicast_filter(struct net_device *dev)
 		wrl(mp, off, v);
 	}
 
-	port_config &= ~UNICAST_PROMISCUOUS_MODE;
 	wrlp(mp, PORT_CONFIG, port_config);
 }
 
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index ab11c2b3f0f..970cedeb5f3 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -169,6 +169,7 @@
 #define	MAX_NUM_CARDS		4
 
 #define MAX_BUFFERS_PER_CMD	32
+#define TX_STOP_THRESH		((MAX_SKB_FRAGS >> 2) + 4)
 
 /*
  * Following are the states of the Phantom. Phantom will set them and
@@ -1436,7 +1437,7 @@ int netxen_nic_set_mac(struct net_device *netdev, void *p);
 struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev);
 
 void netxen_nic_update_cmd_producer(struct netxen_adapter *adapter,
-		struct nx_host_tx_ring *tx_ring, uint32_t crb_producer);
+		struct nx_host_tx_ring *tx_ring);
 
 /*
  * NetXen Board information
@@ -1538,6 +1539,14 @@ dma_watchdog_wakeup(struct netxen_adapter *adapter)
 }
 
 
+static inline u32 netxen_tx_avail(struct nx_host_tx_ring *tx_ring)
+{
+	smp_mb();
+	return find_diff_among(tx_ring->producer,
+			tx_ring->sw_consumer, tx_ring->num_desc);
+
+}
+
 int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, __le64 *mac);
 int netxen_p3_get_mac_addr(struct netxen_adapter *adapter, __le64 *mac);
 extern void netxen_change_ringparam(struct netxen_adapter *adapter);
diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h
index 7f0ddbfa7b2..3cc047844af 100644
--- a/drivers/net/netxen/netxen_nic_hdr.h
+++ b/drivers/net/netxen/netxen_nic_hdr.h
@@ -355,6 +355,7 @@ enum {
 #define NETXEN_HW_CRB_HUB_AGT_ADR_LPC	\
 	((NETXEN_HW_H6_CH_HUB_ADR << 7) | NETXEN_HW_LPC_CRB_AGT_ADR)
 
+#define NETXEN_SRE_MISC			(NETXEN_CRB_SRE + 0x0002c)
 #define NETXEN_SRE_INT_STATUS		(NETXEN_CRB_SRE + 0x00034)
 #define NETXEN_SRE_PBI_ACTIVE_STATUS	(NETXEN_CRB_SRE + 0x01014)
 #define NETXEN_SRE_L1RE_CTL		(NETXEN_CRB_SRE + 0x03000)
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 42ffb825ebf..ce3b89d2cbb 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -488,7 +488,7 @@ netxen_send_cmd_descs(struct netxen_adapter *adapter,
 
 	tx_ring->producer = producer;
 
-	netxen_nic_update_cmd_producer(adapter, tx_ring, producer);
+	netxen_nic_update_cmd_producer(adapter, tx_ring);
 
 	netif_tx_unlock_bh(adapter->netdev);
 
@@ -2041,8 +2041,8 @@ void netxen_nic_get_firmware_info(struct netxen_adapter *adapter)
 			fw_major, fw_minor, fw_build);
 
 	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
-		i = NXRD32(adapter, NETXEN_MIU_MN_CONTROL);
-		adapter->ahw.cut_through = (i & 0x4) ? 1 : 0;
+		i = NXRD32(adapter, NETXEN_SRE_MISC);
+		adapter->ahw.cut_through = (i & 0x8000) ? 1 : 0;
 		dev_info(&pdev->dev, "firmware running in %s mode\n",
 		adapter->ahw.cut_through ? "cut-through" : "legacy");
 	}
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 6f77ad58e3b..bdb143d2b5c 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -1292,7 +1292,6 @@ int netxen_process_cmd_ring(struct netxen_adapter *adapter)
 		return 1;
 
 	sw_consumer = tx_ring->sw_consumer;
-	barrier(); /* hw_consumer can change underneath */
 	hw_consumer = le32_to_cpu(*(tx_ring->hw_consumer));
 
 	while (sw_consumer != hw_consumer) {
@@ -1319,14 +1318,15 @@ int netxen_process_cmd_ring(struct netxen_adapter *adapter)
 			break;
 	}
 
-	tx_ring->sw_consumer = sw_consumer;
-
 	if (count && netif_running(netdev)) {
+		tx_ring->sw_consumer = sw_consumer;
+
 		smp_mb();
+
 		if (netif_queue_stopped(netdev) && netif_carrier_ok(netdev)) {
 			netif_tx_lock(netdev);
-			netif_wake_queue(netdev);
-			smp_mb();
+			if (netxen_tx_avail(tx_ring) > TX_STOP_THRESH)
+				netif_wake_queue(netdev);
 			netif_tx_unlock(netdev);
 		}
 	}
@@ -1343,7 +1343,6 @@ int netxen_process_cmd_ring(struct netxen_adapter *adapter)
 	 * There is still a possible race condition and the host could miss an
 	 * interrupt. The card has to take care of this.
 	 */
-	barrier(); /* hw_consumer can change underneath */
 	hw_consumer = le32_to_cpu(*(tx_ring->hw_consumer));
 	done = (sw_consumer == hw_consumer);
 	spin_unlock(&adapter->tx_clean_lock);
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 98737ef7293..71daa3d5f11 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -107,9 +107,14 @@ static uint32_t crb_cmd_producer[4] = {
 
 void
 netxen_nic_update_cmd_producer(struct netxen_adapter *adapter,
-		struct nx_host_tx_ring *tx_ring, u32 producer)
+		struct nx_host_tx_ring *tx_ring)
 {
-	NXWR32(adapter, tx_ring->crb_cmd_producer, producer);
+	NXWR32(adapter, tx_ring->crb_cmd_producer, tx_ring->producer);
+
+	if (netxen_tx_avail(tx_ring) <= TX_STOP_THRESH) {
+		netif_stop_queue(adapter->netdev);
+		smp_mb();
+	}
 }
 
 static uint32_t crb_cmd_consumer[4] = {
@@ -119,9 +124,9 @@ static uint32_t crb_cmd_consumer[4] = {
 
 static inline void
 netxen_nic_update_cmd_consumer(struct netxen_adapter *adapter,
-		struct nx_host_tx_ring *tx_ring, u32 consumer)
+		struct nx_host_tx_ring *tx_ring)
 {
-	NXWR32(adapter, tx_ring->crb_cmd_consumer, consumer);
+	NXWR32(adapter, tx_ring->crb_cmd_consumer, tx_ring->sw_consumer);
 }
 
 static uint32_t msi_tgt_status[8] = {
@@ -900,8 +905,11 @@ netxen_nic_attach(struct netxen_adapter *adapter)
 		tx_ring->crb_cmd_producer = crb_cmd_producer[adapter->portnum];
 		tx_ring->crb_cmd_consumer = crb_cmd_consumer[adapter->portnum];
 
-		netxen_nic_update_cmd_producer(adapter, tx_ring, 0);
-		netxen_nic_update_cmd_consumer(adapter, tx_ring, 0);
+		tx_ring->producer = 0;
+		tx_ring->sw_consumer = 0;
+
+		netxen_nic_update_cmd_producer(adapter, tx_ring);
+		netxen_nic_update_cmd_consumer(adapter, tx_ring);
 	}
 
 	for (ring = 0; ring < adapter->max_rds_rings; ring++) {
@@ -1362,7 +1370,7 @@ netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	dma_addr_t temp_dma;
 	int i, k;
 
-	u32 producer, consumer;
+	u32 producer;
 	int frag_count, no_of_desc;
 	u32 num_txd = tx_ring->num_desc;
 	bool is_tso = false;
@@ -1372,15 +1380,13 @@ netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	/* 4 fragments per cmd des */
 	no_of_desc = (frag_count + 3) >> 2;
 
-	producer = tx_ring->producer;
-	smp_mb();
-	consumer = tx_ring->sw_consumer;
-	if ((no_of_desc+2) >= find_diff_among(producer, consumer, num_txd)) {
+	if (unlikely(no_of_desc + 2) > netxen_tx_avail(tx_ring)) {
 		netif_stop_queue(netdev);
-		smp_mb();
 		return NETDEV_TX_BUSY;
 	}
 
+	producer = tx_ring->producer;
+
 	hwdesc = &tx_ring->desc_head[producer];
 	netxen_clear_cmddesc((u64 *)hwdesc);
 	pbuf = &tx_ring->cmd_buf_arr[producer];
@@ -1493,7 +1499,7 @@ netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	tx_ring->producer = producer;
 	adapter->stats.txbytes += skb->len;
 
-	netxen_nic_update_cmd_producer(adapter, tx_ring, producer);
+	netxen_nic_update_cmd_producer(adapter, tx_ring);
 
 	adapter->stats.xmitcalled++;
 
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index fa61a12c5e1..d2146d4a10f 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -6376,7 +6376,7 @@ static void niu_set_rx_mode(struct net_device *dev)
 	if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 0))
 		np->flags |= NIU_FLAGS_MCAST;
 
-	alt_cnt = dev->uc_count;
+	alt_cnt = dev->uc.count;
 	if (alt_cnt > niu_num_alt_addr(np)) {
 		alt_cnt = 0;
 		np->flags |= NIU_FLAGS_PROMISC;
@@ -6385,7 +6385,7 @@ static void niu_set_rx_mode(struct net_device *dev)
 	if (alt_cnt) {
 		int index = 0;
 
-		list_for_each_entry(ha, &dev->uc_list, list) {
+		list_for_each_entry(ha, &dev->uc.list, list) {
 			err = niu_set_alt_mac(np, index, ha->addr);
 			if (err)
 				printk(KERN_WARNING PFX "%s: Error %d "
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index a2ece89622d..eba937c4637 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -244,7 +244,7 @@ EXPORT_SYMBOL(get_phy_device);
 
 /**
  * phy_device_register - Register the phy device on the MDIO bus
- * @phy_device: phy_device structure to be added to the MDIO bus
+ * @phydev: phy_device structure to be added to the MDIO bus
  */
 int phy_device_register(struct phy_device *phydev)
 {
diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp_async.c
index 6de8399d6dd..17c116bb332 100644
--- a/drivers/net/ppp_async.c
+++ b/drivers/net/ppp_async.c
@@ -356,7 +356,6 @@ ppp_asynctty_receive(struct tty_struct *tty, const unsigned char *buf,
 	if (!skb_queue_empty(&ap->rqueue))
 		tasklet_schedule(&ap->tsk);
 	ap_put(ap);
-	tty_unthrottle(tty);
 }
 
 static void
diff --git a/drivers/net/ppp_synctty.c b/drivers/net/ppp_synctty.c
index d2fa2db1358..aa3d39f38e2 100644
--- a/drivers/net/ppp_synctty.c
+++ b/drivers/net/ppp_synctty.c
@@ -397,7 +397,6 @@ ppp_sync_receive(struct tty_struct *tty, const unsigned char *buf,
 	if (!skb_queue_empty(&ap->rqueue))
 		tasklet_schedule(&ap->tsk);
 	sp_put(ap);
-	tty_unthrottle(tty);
 }
 
 static void
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
index 2b38f39924a..d1a5fb4d6ac 100644
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -214,9 +214,10 @@ static void gelic_card_free_chain(struct gelic_card *card,
  *
  * returns 0 on success, <0 on failure
  */
-static int gelic_card_init_chain(struct gelic_card *card,
-				 struct gelic_descr_chain *chain,
-				 struct gelic_descr *start_descr, int no)
+static int __devinit gelic_card_init_chain(struct gelic_card *card,
+					   struct gelic_descr_chain *chain,
+					   struct gelic_descr *start_descr,
+					   int no)
 {
 	int i;
 	struct gelic_descr *descr;
@@ -407,7 +408,7 @@ rewind:
  *
  * returns 0 on success, < 0 on failure
  */
-static int gelic_card_alloc_rx_skbs(struct gelic_card *card)
+static int __devinit gelic_card_alloc_rx_skbs(struct gelic_card *card)
 {
 	struct gelic_descr_chain *chain;
 	int ret;
@@ -1422,8 +1423,8 @@ static const struct net_device_ops gelic_netdevice_ops = {
  *
  * fills out function pointers in the net_device structure
  */
-static void gelic_ether_setup_netdev_ops(struct net_device *netdev,
-					 struct napi_struct *napi)
+static void __devinit gelic_ether_setup_netdev_ops(struct net_device *netdev,
+						   struct napi_struct *napi)
 {
 	netdev->watchdog_timeo = GELIC_NET_WATCHDOG_TIMEOUT;
 	/* NAPI */
@@ -1443,7 +1444,8 @@ static void gelic_ether_setup_netdev_ops(struct net_device *netdev,
  * gelic_ether_setup_netdev initializes the net_device structure
  * and register it.
  **/
-int gelic_net_setup_netdev(struct net_device *netdev, struct gelic_card *card)
+int __devinit gelic_net_setup_netdev(struct net_device *netdev,
+				     struct gelic_card *card)
 {
 	int status;
 	u64 v1, v2;
@@ -1491,7 +1493,7 @@ int gelic_net_setup_netdev(struct net_device *netdev, struct gelic_card *card)
  * the card and net_device structures are linked to each other
  */
 #define GELIC_ALIGN (32)
-static struct gelic_card *gelic_alloc_card_net(struct net_device **netdev)
+static struct gelic_card * __devinit gelic_alloc_card_net(struct net_device **netdev)
 {
 	struct gelic_card *card;
 	struct gelic_port *port;
@@ -1542,7 +1544,7 @@ static struct gelic_card *gelic_alloc_card_net(struct net_device **netdev)
 	return card;
 }
 
-static void gelic_card_get_vlan_info(struct gelic_card *card)
+static void __devinit gelic_card_get_vlan_info(struct gelic_card *card)
 {
 	u64 v1, v2;
 	int status;
@@ -1616,7 +1618,7 @@ static void gelic_card_get_vlan_info(struct gelic_card *card)
 /**
  * ps3_gelic_driver_probe - add a device to the control of this driver
  */
-static int ps3_gelic_driver_probe(struct ps3_system_bus_device *dev)
+static int __devinit ps3_gelic_driver_probe(struct ps3_system_bus_device *dev)
 {
 	struct gelic_card *card;
 	struct net_device *netdev;
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index 4f3ada622f9..b6b3ca9bdb2 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -2442,7 +2442,7 @@ static const struct iw_handler_def gelic_wl_wext_handler_def = {
 #endif
 };
 
-static struct net_device *gelic_wl_alloc(struct gelic_card *card)
+static struct net_device * __devinit gelic_wl_alloc(struct gelic_card *card)
 {
 	struct net_device *netdev;
 	struct gelic_port *port;
@@ -2722,7 +2722,7 @@ static struct ethtool_ops gelic_wl_ethtool_ops = {
 	.set_rx_csum	= gelic_net_set_rx_csum,
 };
 
-static void gelic_wl_setup_netdev_ops(struct net_device *netdev)
+static void __devinit gelic_wl_setup_netdev_ops(struct net_device *netdev)
 {
 	struct gelic_wl_info *wl;
 	wl = port_wl(netdev_priv(netdev));
@@ -2738,7 +2738,7 @@ static void gelic_wl_setup_netdev_ops(struct net_device *netdev)
 /*
  * driver probe/remove
  */
-int gelic_wl_driver_probe(struct gelic_card *card)
+int __devinit gelic_wl_driver_probe(struct gelic_card *card)
 {
 	int ret;
 	struct net_device *netdev;
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index 8a823ecc99a..bbc6d4d3cc9 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -3837,7 +3837,9 @@ static void ql_reset_work(struct work_struct *work)
 						      16) | ISP_CONTROL_RI));
 			}
 
+			spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
 			ssleep(1);
+			spin_lock_irqsave(&qdev->hw_lock, hw_flags);
 		} while (--max_wait_time);
 		spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
 
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 35196faa084..4b53b58d75f 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -51,9 +51,6 @@
 #define TX_BUFFS_AVAIL(tp) \
 	(tp->dirty_tx + NUM_TX_DESC - tp->cur_tx - 1)
 
-/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
-static const int max_interrupt_work = 20;
-
 /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
    The RTL chips use a 64 element hash table based on the Ethernet CRC. */
 static const int multicast_filter_limit = 32;
@@ -3811,22 +3808,11 @@ static struct net_device_stats *rtl8169_get_stats(struct net_device *dev)
 
 static void rtl8169_net_suspend(struct net_device *dev)
 {
-	struct rtl8169_private *tp = netdev_priv(dev);
-	void __iomem *ioaddr = tp->mmio_addr;
-
 	if (!netif_running(dev))
 		return;
 
 	netif_device_detach(dev);
 	netif_stop_queue(dev);
-
-	spin_lock_irq(&tp->lock);
-
-	rtl8169_asic_down(ioaddr);
-
-	rtl8169_rx_missed(dev, ioaddr);
-
-	spin_unlock_irq(&tp->lock);
 }
 
 #ifdef CONFIG_PM
@@ -3876,9 +3862,17 @@ static struct dev_pm_ops rtl8169_pm_ops = {
 static void rtl_shutdown(struct pci_dev *pdev)
 {
 	struct net_device *dev = pci_get_drvdata(pdev);
+	struct rtl8169_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
 
 	rtl8169_net_suspend(dev);
 
+	spin_lock_irq(&tp->lock);
+
+	rtl8169_asic_down(ioaddr);
+
+	spin_unlock_irq(&tp->lock);
+
 	if (system_state == SYSTEM_POWER_OFF) {
 		pci_wake_from_d3(pdev, true);
 		pci_set_power_state(pdev, PCI_D3hot);
diff --git a/drivers/net/s6gmac.c b/drivers/net/s6gmac.c
new file mode 100644
index 00000000000..5345e47b35a
--- /dev/null
+++ b/drivers/net/s6gmac.c
@@ -0,0 +1,1073 @@
+/*
+ * Ethernet driver for S6105 on chip network device
+ * (c)2008 emlix GmbH http://www.emlix.com
+ * Authors:	Oskar Schirmer <os@emlix.com>
+ *		Daniel Gloeckner <dg@emlix.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/if.h>
+#include <linux/stddef.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <variant/hardware.h>
+#include <variant/dmac.h>
+
+#define DRV_NAME "s6gmac"
+#define DRV_PRMT DRV_NAME ": "
+
+
+/* register declarations */
+
+#define S6_GMAC_MACCONF1	0x000
+#define S6_GMAC_MACCONF1_TXENA		0
+#define S6_GMAC_MACCONF1_SYNCTX		1
+#define S6_GMAC_MACCONF1_RXENA		2
+#define S6_GMAC_MACCONF1_SYNCRX		3
+#define S6_GMAC_MACCONF1_TXFLOWCTRL	4
+#define S6_GMAC_MACCONF1_RXFLOWCTRL	5
+#define S6_GMAC_MACCONF1_LOOPBACK	8
+#define S6_GMAC_MACCONF1_RESTXFUNC	16
+#define S6_GMAC_MACCONF1_RESRXFUNC	17
+#define S6_GMAC_MACCONF1_RESTXMACCTRL	18
+#define S6_GMAC_MACCONF1_RESRXMACCTRL	19
+#define S6_GMAC_MACCONF1_SIMULRES	30
+#define S6_GMAC_MACCONF1_SOFTRES	31
+#define S6_GMAC_MACCONF2	0x004
+#define S6_GMAC_MACCONF2_FULL		0
+#define S6_GMAC_MACCONF2_CRCENA		1
+#define S6_GMAC_MACCONF2_PADCRCENA	2
+#define S6_GMAC_MACCONF2_LENGTHFCHK	4
+#define S6_GMAC_MACCONF2_HUGEFRAMENA	5
+#define S6_GMAC_MACCONF2_IFMODE		8
+#define S6_GMAC_MACCONF2_IFMODE_NIBBLE		1
+#define S6_GMAC_MACCONF2_IFMODE_BYTE		2
+#define S6_GMAC_MACCONF2_IFMODE_MASK		3
+#define S6_GMAC_MACCONF2_PREAMBLELEN	12
+#define S6_GMAC_MACCONF2_PREAMBLELEN_MASK	0x0F
+#define S6_GMAC_MACIPGIFG	0x008
+#define S6_GMAC_MACIPGIFG_B2BINTERPGAP	0
+#define S6_GMAC_MACIPGIFG_B2BINTERPGAP_MASK	0x7F
+#define S6_GMAC_MACIPGIFG_MINIFGENFORCE	8
+#define S6_GMAC_MACIPGIFG_B2BINTERPGAP2	16
+#define S6_GMAC_MACIPGIFG_B2BINTERPGAP1	24
+#define S6_GMAC_MACHALFDUPLEX	0x00C
+#define S6_GMAC_MACHALFDUPLEX_COLLISWIN	0
+#define S6_GMAC_MACHALFDUPLEX_COLLISWIN_MASK	0x3F
+#define S6_GMAC_MACHALFDUPLEX_RETXMAX	12
+#define S6_GMAC_MACHALFDUPLEX_RETXMAX_MASK	0x0F
+#define S6_GMAC_MACHALFDUPLEX_EXCESSDEF	16
+#define S6_GMAC_MACHALFDUPLEX_NOBACKOFF	17
+#define S6_GMAC_MACHALFDUPLEX_BPNOBCKOF	18
+#define S6_GMAC_MACHALFDUPLEX_ALTBEBENA	19
+#define S6_GMAC_MACHALFDUPLEX_ALTBEBTRN	20
+#define S6_GMAC_MACHALFDUPLEX_ALTBEBTR_MASK	0x0F
+#define S6_GMAC_MACMAXFRAMELEN	0x010
+#define S6_GMAC_MACMIICONF	0x020
+#define S6_GMAC_MACMIICONF_CSEL		0
+#define S6_GMAC_MACMIICONF_CSEL_DIV10		0
+#define S6_GMAC_MACMIICONF_CSEL_DIV12		1
+#define S6_GMAC_MACMIICONF_CSEL_DIV14		2
+#define S6_GMAC_MACMIICONF_CSEL_DIV18		3
+#define S6_GMAC_MACMIICONF_CSEL_DIV24		4
+#define S6_GMAC_MACMIICONF_CSEL_DIV34		5
+#define S6_GMAC_MACMIICONF_CSEL_DIV68		6
+#define S6_GMAC_MACMIICONF_CSEL_DIV168		7
+#define S6_GMAC_MACMIICONF_CSEL_MASK		7
+#define S6_GMAC_MACMIICONF_PREAMBLESUPR	4
+#define S6_GMAC_MACMIICONF_SCANAUTOINCR	5
+#define S6_GMAC_MACMIICMD	0x024
+#define S6_GMAC_MACMIICMD_READ		0
+#define S6_GMAC_MACMIICMD_SCAN		1
+#define S6_GMAC_MACMIIADDR	0x028
+#define S6_GMAC_MACMIIADDR_REG		0
+#define S6_GMAC_MACMIIADDR_REG_MASK		0x1F
+#define S6_GMAC_MACMIIADDR_PHY		8
+#define S6_GMAC_MACMIIADDR_PHY_MASK		0x1F
+#define S6_GMAC_MACMIICTRL	0x02C
+#define S6_GMAC_MACMIISTAT	0x030
+#define S6_GMAC_MACMIIINDI	0x034
+#define S6_GMAC_MACMIIINDI_BUSY		0
+#define S6_GMAC_MACMIIINDI_SCAN		1
+#define S6_GMAC_MACMIIINDI_INVAL	2
+#define S6_GMAC_MACINTERFSTAT	0x03C
+#define S6_GMAC_MACINTERFSTAT_LINKFAIL	3
+#define S6_GMAC_MACINTERFSTAT_EXCESSDEF	9
+#define S6_GMAC_MACSTATADDR1	0x040
+#define S6_GMAC_MACSTATADDR2	0x044
+
+#define S6_GMAC_FIFOCONF0	0x048
+#define S6_GMAC_FIFOCONF0_HSTRSTWT	0
+#define S6_GMAC_FIFOCONF0_HSTRSTSR	1
+#define S6_GMAC_FIFOCONF0_HSTRSTFR	2
+#define S6_GMAC_FIFOCONF0_HSTRSTST	3
+#define S6_GMAC_FIFOCONF0_HSTRSTFT	4
+#define S6_GMAC_FIFOCONF0_WTMENREQ	8
+#define S6_GMAC_FIFOCONF0_SRFENREQ	9
+#define S6_GMAC_FIFOCONF0_FRFENREQ	10
+#define S6_GMAC_FIFOCONF0_STFENREQ	11
+#define S6_GMAC_FIFOCONF0_FTFENREQ	12
+#define S6_GMAC_FIFOCONF0_WTMENRPLY	16
+#define S6_GMAC_FIFOCONF0_SRFENRPLY	17
+#define S6_GMAC_FIFOCONF0_FRFENRPLY	18
+#define S6_GMAC_FIFOCONF0_STFENRPLY	19
+#define S6_GMAC_FIFOCONF0_FTFENRPLY	20
+#define S6_GMAC_FIFOCONF1	0x04C
+#define S6_GMAC_FIFOCONF2	0x050
+#define S6_GMAC_FIFOCONF2_CFGLWM	0
+#define S6_GMAC_FIFOCONF2_CFGHWM	16
+#define S6_GMAC_FIFOCONF3	0x054
+#define S6_GMAC_FIFOCONF3_CFGFTTH	0
+#define S6_GMAC_FIFOCONF3_CFGHWMFT	16
+#define S6_GMAC_FIFOCONF4	0x058
+#define S6_GMAC_FIFOCONF_RSV_PREVDROP	0
+#define S6_GMAC_FIFOCONF_RSV_RUNT	1
+#define S6_GMAC_FIFOCONF_RSV_FALSECAR	2
+#define S6_GMAC_FIFOCONF_RSV_CODEERR	3
+#define S6_GMAC_FIFOCONF_RSV_CRCERR	4
+#define S6_GMAC_FIFOCONF_RSV_LENGTHERR	5
+#define S6_GMAC_FIFOCONF_RSV_LENRANGE	6
+#define S6_GMAC_FIFOCONF_RSV_OK		7
+#define S6_GMAC_FIFOCONF_RSV_MULTICAST	8
+#define S6_GMAC_FIFOCONF_RSV_BROADCAST	9
+#define S6_GMAC_FIFOCONF_RSV_DRIBBLE	10
+#define S6_GMAC_FIFOCONF_RSV_CTRLFRAME	11
+#define S6_GMAC_FIFOCONF_RSV_PAUSECTRL	12
+#define S6_GMAC_FIFOCONF_RSV_UNOPCODE	13
+#define S6_GMAC_FIFOCONF_RSV_VLANTAG	14
+#define S6_GMAC_FIFOCONF_RSV_LONGEVENT	15
+#define S6_GMAC_FIFOCONF_RSV_TRUNCATED	16
+#define S6_GMAC_FIFOCONF_RSV_MASK		0x3FFFF
+#define S6_GMAC_FIFOCONF5	0x05C
+#define S6_GMAC_FIFOCONF5_DROPLT64	18
+#define S6_GMAC_FIFOCONF5_CFGBYTM	19
+#define S6_GMAC_FIFOCONF5_RXDROPSIZE	20
+#define S6_GMAC_FIFOCONF5_RXDROPSIZE_MASK	0xF
+
+#define S6_GMAC_STAT_REGS	0x080
+#define S6_GMAC_STAT_SIZE_MIN		12
+#define S6_GMAC_STATTR64	0x080
+#define S6_GMAC_STATTR64_SIZE		18
+#define S6_GMAC_STATTR127	0x084
+#define S6_GMAC_STATTR127_SIZE		18
+#define S6_GMAC_STATTR255	0x088
+#define S6_GMAC_STATTR255_SIZE		18
+#define S6_GMAC_STATTR511	0x08C
+#define S6_GMAC_STATTR511_SIZE		18
+#define S6_GMAC_STATTR1K	0x090
+#define S6_GMAC_STATTR1K_SIZE		18
+#define S6_GMAC_STATTRMAX	0x094
+#define S6_GMAC_STATTRMAX_SIZE		18
+#define S6_GMAC_STATTRMGV	0x098
+#define S6_GMAC_STATTRMGV_SIZE		18
+#define S6_GMAC_STATRBYT	0x09C
+#define S6_GMAC_STATRBYT_SIZE		24
+#define S6_GMAC_STATRPKT	0x0A0
+#define S6_GMAC_STATRPKT_SIZE		18
+#define S6_GMAC_STATRFCS	0x0A4
+#define S6_GMAC_STATRFCS_SIZE		12
+#define S6_GMAC_STATRMCA	0x0A8
+#define S6_GMAC_STATRMCA_SIZE		18
+#define S6_GMAC_STATRBCA	0x0AC
+#define S6_GMAC_STATRBCA_SIZE		22
+#define S6_GMAC_STATRXCF	0x0B0
+#define S6_GMAC_STATRXCF_SIZE		18
+#define S6_GMAC_STATRXPF	0x0B4
+#define S6_GMAC_STATRXPF_SIZE		12
+#define S6_GMAC_STATRXUO	0x0B8
+#define S6_GMAC_STATRXUO_SIZE		12
+#define S6_GMAC_STATRALN	0x0BC
+#define S6_GMAC_STATRALN_SIZE		12
+#define S6_GMAC_STATRFLR	0x0C0
+#define S6_GMAC_STATRFLR_SIZE		16
+#define S6_GMAC_STATRCDE	0x0C4
+#define S6_GMAC_STATRCDE_SIZE		12
+#define S6_GMAC_STATRCSE	0x0C8
+#define S6_GMAC_STATRCSE_SIZE		12
+#define S6_GMAC_STATRUND	0x0CC
+#define S6_GMAC_STATRUND_SIZE		12
+#define S6_GMAC_STATROVR	0x0D0
+#define S6_GMAC_STATROVR_SIZE		12
+#define S6_GMAC_STATRFRG	0x0D4
+#define S6_GMAC_STATRFRG_SIZE		12
+#define S6_GMAC_STATRJBR	0x0D8
+#define S6_GMAC_STATRJBR_SIZE		12
+#define S6_GMAC_STATRDRP	0x0DC
+#define S6_GMAC_STATRDRP_SIZE		12
+#define S6_GMAC_STATTBYT	0x0E0
+#define S6_GMAC_STATTBYT_SIZE		24
+#define S6_GMAC_STATTPKT	0x0E4
+#define S6_GMAC_STATTPKT_SIZE		18
+#define S6_GMAC_STATTMCA	0x0E8
+#define S6_GMAC_STATTMCA_SIZE		18
+#define S6_GMAC_STATTBCA	0x0EC
+#define S6_GMAC_STATTBCA_SIZE		18
+#define S6_GMAC_STATTXPF	0x0F0
+#define S6_GMAC_STATTXPF_SIZE		12
+#define S6_GMAC_STATTDFR	0x0F4
+#define S6_GMAC_STATTDFR_SIZE		12
+#define S6_GMAC_STATTEDF	0x0F8
+#define S6_GMAC_STATTEDF_SIZE		12
+#define S6_GMAC_STATTSCL	0x0FC
+#define S6_GMAC_STATTSCL_SIZE		12
+#define S6_GMAC_STATTMCL	0x100
+#define S6_GMAC_STATTMCL_SIZE		12
+#define S6_GMAC_STATTLCL	0x104
+#define S6_GMAC_STATTLCL_SIZE		12
+#define S6_GMAC_STATTXCL	0x108
+#define S6_GMAC_STATTXCL_SIZE		12
+#define S6_GMAC_STATTNCL	0x10C
+#define S6_GMAC_STATTNCL_SIZE		13
+#define S6_GMAC_STATTPFH	0x110
+#define S6_GMAC_STATTPFH_SIZE		12
+#define S6_GMAC_STATTDRP	0x114
+#define S6_GMAC_STATTDRP_SIZE		12
+#define S6_GMAC_STATTJBR	0x118
+#define S6_GMAC_STATTJBR_SIZE		12
+#define S6_GMAC_STATTFCS	0x11C
+#define S6_GMAC_STATTFCS_SIZE		12
+#define S6_GMAC_STATTXCF	0x120
+#define S6_GMAC_STATTXCF_SIZE		12
+#define S6_GMAC_STATTOVR	0x124
+#define S6_GMAC_STATTOVR_SIZE		12
+#define S6_GMAC_STATTUND	0x128
+#define S6_GMAC_STATTUND_SIZE		12
+#define S6_GMAC_STATTFRG	0x12C
+#define S6_GMAC_STATTFRG_SIZE		12
+#define S6_GMAC_STATCARRY(n)	(0x130 + 4*(n))
+#define S6_GMAC_STATCARRYMSK(n)	(0x138 + 4*(n))
+#define S6_GMAC_STATCARRY1_RDRP		0
+#define S6_GMAC_STATCARRY1_RJBR		1
+#define S6_GMAC_STATCARRY1_RFRG		2
+#define S6_GMAC_STATCARRY1_ROVR		3
+#define S6_GMAC_STATCARRY1_RUND		4
+#define S6_GMAC_STATCARRY1_RCSE		5
+#define S6_GMAC_STATCARRY1_RCDE		6
+#define S6_GMAC_STATCARRY1_RFLR		7
+#define S6_GMAC_STATCARRY1_RALN		8
+#define S6_GMAC_STATCARRY1_RXUO		9
+#define S6_GMAC_STATCARRY1_RXPF		10
+#define S6_GMAC_STATCARRY1_RXCF		11
+#define S6_GMAC_STATCARRY1_RBCA		12
+#define S6_GMAC_STATCARRY1_RMCA		13
+#define S6_GMAC_STATCARRY1_RFCS		14
+#define S6_GMAC_STATCARRY1_RPKT		15
+#define S6_GMAC_STATCARRY1_RBYT		16
+#define S6_GMAC_STATCARRY1_TRMGV	25
+#define S6_GMAC_STATCARRY1_TRMAX	26
+#define S6_GMAC_STATCARRY1_TR1K		27
+#define S6_GMAC_STATCARRY1_TR511	28
+#define S6_GMAC_STATCARRY1_TR255	29
+#define S6_GMAC_STATCARRY1_TR127	30
+#define S6_GMAC_STATCARRY1_TR64		31
+#define S6_GMAC_STATCARRY2_TDRP		0
+#define S6_GMAC_STATCARRY2_TPFH		1
+#define S6_GMAC_STATCARRY2_TNCL		2
+#define S6_GMAC_STATCARRY2_TXCL		3
+#define S6_GMAC_STATCARRY2_TLCL		4
+#define S6_GMAC_STATCARRY2_TMCL		5
+#define S6_GMAC_STATCARRY2_TSCL		6
+#define S6_GMAC_STATCARRY2_TEDF		7
+#define S6_GMAC_STATCARRY2_TDFR		8
+#define S6_GMAC_STATCARRY2_TXPF		9
+#define S6_GMAC_STATCARRY2_TBCA		10
+#define S6_GMAC_STATCARRY2_TMCA		11
+#define S6_GMAC_STATCARRY2_TPKT		12
+#define S6_GMAC_STATCARRY2_TBYT		13
+#define S6_GMAC_STATCARRY2_TFRG		14
+#define S6_GMAC_STATCARRY2_TUND		15
+#define S6_GMAC_STATCARRY2_TOVR		16
+#define S6_GMAC_STATCARRY2_TXCF		17
+#define S6_GMAC_STATCARRY2_TFCS		18
+#define S6_GMAC_STATCARRY2_TJBR		19
+
+#define S6_GMAC_HOST_PBLKCTRL	0x140
+#define S6_GMAC_HOST_PBLKCTRL_TXENA	0
+#define S6_GMAC_HOST_PBLKCTRL_RXENA	1
+#define S6_GMAC_HOST_PBLKCTRL_TXSRES	2
+#define S6_GMAC_HOST_PBLKCTRL_RXSRES	3
+#define S6_GMAC_HOST_PBLKCTRL_TXBSIZ	8
+#define S6_GMAC_HOST_PBLKCTRL_RXBSIZ	12
+#define S6_GMAC_HOST_PBLKCTRL_SIZ_16		4
+#define S6_GMAC_HOST_PBLKCTRL_SIZ_32		5
+#define S6_GMAC_HOST_PBLKCTRL_SIZ_64		6
+#define S6_GMAC_HOST_PBLKCTRL_SIZ_128		7
+#define S6_GMAC_HOST_PBLKCTRL_SIZ_MASK		0xF
+#define S6_GMAC_HOST_PBLKCTRL_STATENA	16
+#define S6_GMAC_HOST_PBLKCTRL_STATAUTOZ	17
+#define S6_GMAC_HOST_PBLKCTRL_STATCLEAR	18
+#define S6_GMAC_HOST_PBLKCTRL_RGMII	19
+#define S6_GMAC_HOST_INTMASK	0x144
+#define S6_GMAC_HOST_INTSTAT	0x148
+#define S6_GMAC_HOST_INT_TXBURSTOVER	3
+#define S6_GMAC_HOST_INT_TXPREWOVER	4
+#define S6_GMAC_HOST_INT_RXBURSTUNDER	5
+#define S6_GMAC_HOST_INT_RXPOSTRFULL	6
+#define S6_GMAC_HOST_INT_RXPOSTRUNDER	7
+#define S6_GMAC_HOST_RXFIFOHWM	0x14C
+#define S6_GMAC_HOST_CTRLFRAMXP	0x150
+#define S6_GMAC_HOST_DSTADDRLO(n) (0x160 + 8*(n))
+#define S6_GMAC_HOST_DSTADDRHI(n) (0x164 + 8*(n))
+#define S6_GMAC_HOST_DSTMASKLO(n) (0x180 + 8*(n))
+#define S6_GMAC_HOST_DSTMASKHI(n) (0x184 + 8*(n))
+
+#define S6_GMAC_BURST_PREWR	0x1B0
+#define S6_GMAC_BURST_PREWR_LEN		0
+#define S6_GMAC_BURST_PREWR_LEN_MASK		((1 << 20) - 1)
+#define S6_GMAC_BURST_PREWR_CFE		20
+#define S6_GMAC_BURST_PREWR_PPE		21
+#define S6_GMAC_BURST_PREWR_FCS		22
+#define S6_GMAC_BURST_PREWR_PAD		23
+#define S6_GMAC_BURST_POSTRD	0x1D0
+#define S6_GMAC_BURST_POSTRD_LEN	0
+#define S6_GMAC_BURST_POSTRD_LEN_MASK		((1 << 20) - 1)
+#define S6_GMAC_BURST_POSTRD_DROP	20
+
+
+/* data handling */
+
+#define S6_NUM_TX_SKB	8	/* must be larger than TX fifo size */
+#define S6_NUM_RX_SKB	16
+#define S6_MAX_FRLEN	1536
+
+struct s6gmac {
+	u32 reg;
+	u32 tx_dma;
+	u32 rx_dma;
+	u32 io;
+	u8 tx_chan;
+	u8 rx_chan;
+	spinlock_t lock;
+	u8 tx_skb_i, tx_skb_o;
+	u8 rx_skb_i, rx_skb_o;
+	struct sk_buff *tx_skb[S6_NUM_TX_SKB];
+	struct sk_buff *rx_skb[S6_NUM_RX_SKB];
+	unsigned long carry[sizeof(struct net_device_stats) / sizeof(long)];
+	unsigned long stats[sizeof(struct net_device_stats) / sizeof(long)];
+	struct phy_device *phydev;
+	struct {
+		struct mii_bus *bus;
+		int irq[PHY_MAX_ADDR];
+	} mii;
+	struct {
+		unsigned int mbit;
+		u8 giga;
+		u8 isup;
+		u8 full;
+	} link;
+};
+
+static void s6gmac_rx_fillfifo(struct s6gmac *pd)
+{
+	struct sk_buff *skb;
+	while ((((u8)(pd->rx_skb_i - pd->rx_skb_o)) < S6_NUM_RX_SKB)
+			&& (!s6dmac_fifo_full(pd->rx_dma, pd->rx_chan))
+			&& (skb = dev_alloc_skb(S6_MAX_FRLEN + 2))) {
+		pd->rx_skb[(pd->rx_skb_i++) % S6_NUM_RX_SKB] = skb;
+		s6dmac_put_fifo_cache(pd->rx_dma, pd->rx_chan,
+			pd->io, (u32)skb->data, S6_MAX_FRLEN);
+	}
+}
+
+static void s6gmac_rx_interrupt(struct net_device *dev)
+{
+	struct s6gmac *pd = netdev_priv(dev);
+	u32 pfx;
+	struct sk_buff *skb;
+	while (((u8)(pd->rx_skb_i - pd->rx_skb_o)) >
+			s6dmac_pending_count(pd->rx_dma, pd->rx_chan)) {
+		skb = pd->rx_skb[(pd->rx_skb_o++) % S6_NUM_RX_SKB];
+		pfx = readl(pd->reg + S6_GMAC_BURST_POSTRD);
+		if (pfx & (1 << S6_GMAC_BURST_POSTRD_DROP)) {
+			dev_kfree_skb_irq(skb);
+		} else {
+			skb_put(skb, (pfx >> S6_GMAC_BURST_POSTRD_LEN)
+				& S6_GMAC_BURST_POSTRD_LEN_MASK);
+			skb->dev = dev;
+			skb->protocol = eth_type_trans(skb, dev);
+			skb->ip_summed = CHECKSUM_UNNECESSARY;
+			netif_rx(skb);
+		}
+	}
+}
+
+static void s6gmac_tx_interrupt(struct net_device *dev)
+{
+	struct s6gmac *pd = netdev_priv(dev);
+	while (((u8)(pd->tx_skb_i - pd->tx_skb_o)) >
+			s6dmac_pending_count(pd->tx_dma, pd->tx_chan)) {
+		dev_kfree_skb_irq(pd->tx_skb[(pd->tx_skb_o++) % S6_NUM_TX_SKB]);
+	}
+	if (!s6dmac_fifo_full(pd->tx_dma, pd->tx_chan))
+		netif_wake_queue(dev);
+}
+
+struct s6gmac_statinf {
+	unsigned reg_size : 4; /* 0: unused */
+	unsigned reg_off : 6;
+	unsigned net_index : 6;
+};
+
+#define S6_STATS_B (8 * sizeof(u32))
+#define S6_STATS_C(b, r, f) [b] = { \
+	BUILD_BUG_ON_ZERO(r##_SIZE < S6_GMAC_STAT_SIZE_MIN) + \
+	BUILD_BUG_ON_ZERO((r##_SIZE - (S6_GMAC_STAT_SIZE_MIN - 1)) \
+			>= (1<<4)) + \
+	r##_SIZE - (S6_GMAC_STAT_SIZE_MIN - 1), \
+	BUILD_BUG_ON_ZERO(((unsigned)((r - S6_GMAC_STAT_REGS) / sizeof(u32))) \
+			>= ((1<<6)-1)) + \
+	(r - S6_GMAC_STAT_REGS) / sizeof(u32), \
+	BUILD_BUG_ON_ZERO((offsetof(struct net_device_stats, f)) \
+			% sizeof(unsigned long)) + \
+	BUILD_BUG_ON_ZERO((((unsigned)(offsetof(struct net_device_stats, f)) \
+			/ sizeof(unsigned long)) >= (1<<6))) + \
+	BUILD_BUG_ON_ZERO((sizeof(((struct net_device_stats *)0)->f) \
+			!= sizeof(unsigned long))) + \
+	(offsetof(struct net_device_stats, f)) / sizeof(unsigned long)},
+
+static const struct s6gmac_statinf statinf[2][S6_STATS_B] = { {
+	S6_STATS_C(S6_GMAC_STATCARRY1_RBYT, S6_GMAC_STATRBYT, rx_bytes)
+	S6_STATS_C(S6_GMAC_STATCARRY1_RPKT, S6_GMAC_STATRPKT, rx_packets)
+	S6_STATS_C(S6_GMAC_STATCARRY1_RFCS, S6_GMAC_STATRFCS, rx_crc_errors)
+	S6_STATS_C(S6_GMAC_STATCARRY1_RMCA, S6_GMAC_STATRMCA, multicast)
+	S6_STATS_C(S6_GMAC_STATCARRY1_RALN, S6_GMAC_STATRALN, rx_frame_errors)
+	S6_STATS_C(S6_GMAC_STATCARRY1_RFLR, S6_GMAC_STATRFLR, rx_length_errors)
+	S6_STATS_C(S6_GMAC_STATCARRY1_RCDE, S6_GMAC_STATRCDE, rx_missed_errors)
+	S6_STATS_C(S6_GMAC_STATCARRY1_RUND, S6_GMAC_STATRUND, rx_length_errors)
+	S6_STATS_C(S6_GMAC_STATCARRY1_ROVR, S6_GMAC_STATROVR, rx_length_errors)
+	S6_STATS_C(S6_GMAC_STATCARRY1_RFRG, S6_GMAC_STATRFRG, rx_crc_errors)
+	S6_STATS_C(S6_GMAC_STATCARRY1_RJBR, S6_GMAC_STATRJBR, rx_crc_errors)
+	S6_STATS_C(S6_GMAC_STATCARRY1_RDRP, S6_GMAC_STATRDRP, rx_dropped)
+}, {
+	S6_STATS_C(S6_GMAC_STATCARRY2_TBYT, S6_GMAC_STATTBYT, tx_bytes)
+	S6_STATS_C(S6_GMAC_STATCARRY2_TPKT, S6_GMAC_STATTPKT, tx_packets)
+	S6_STATS_C(S6_GMAC_STATCARRY2_TEDF, S6_GMAC_STATTEDF, tx_aborted_errors)
+	S6_STATS_C(S6_GMAC_STATCARRY2_TXCL, S6_GMAC_STATTXCL, tx_aborted_errors)
+	S6_STATS_C(S6_GMAC_STATCARRY2_TNCL, S6_GMAC_STATTNCL, collisions)
+	S6_STATS_C(S6_GMAC_STATCARRY2_TDRP, S6_GMAC_STATTDRP, tx_dropped)
+	S6_STATS_C(S6_GMAC_STATCARRY2_TJBR, S6_GMAC_STATTJBR, tx_errors)
+	S6_STATS_C(S6_GMAC_STATCARRY2_TFCS, S6_GMAC_STATTFCS, tx_errors)
+	S6_STATS_C(S6_GMAC_STATCARRY2_TOVR, S6_GMAC_STATTOVR, tx_errors)
+	S6_STATS_C(S6_GMAC_STATCARRY2_TUND, S6_GMAC_STATTUND, tx_errors)
+	S6_STATS_C(S6_GMAC_STATCARRY2_TFRG, S6_GMAC_STATTFRG, tx_errors)
+} };
+
+static void s6gmac_stats_collect(struct s6gmac *pd,
+		const struct s6gmac_statinf *inf)
+{
+	int b;
+	for (b = 0; b < S6_STATS_B; b++) {
+		if (inf[b].reg_size) {
+			pd->stats[inf[b].net_index] +=
+				readl(pd->reg + S6_GMAC_STAT_REGS
+					+ sizeof(u32) * inf[b].reg_off);
+		}
+	}
+}
+
+static void s6gmac_stats_carry(struct s6gmac *pd,
+		const struct s6gmac_statinf *inf, u32 mask)
+{
+	int b;
+	while (mask) {
+		b = fls(mask) - 1;
+		mask &= ~(1 << b);
+		pd->carry[inf[b].net_index] += (1 << inf[b].reg_size);
+	}
+}
+
+static inline u32 s6gmac_stats_pending(struct s6gmac *pd, int carry)
+{
+	int r = readl(pd->reg + S6_GMAC_STATCARRY(carry)) &
+		~readl(pd->reg + S6_GMAC_STATCARRYMSK(carry));
+	return r;
+}
+
+static inline void s6gmac_stats_interrupt(struct s6gmac *pd, int carry)
+{
+	u32 mask;
+	mask = s6gmac_stats_pending(pd, carry);
+	if (mask) {
+		writel(mask, pd->reg + S6_GMAC_STATCARRY(carry));
+		s6gmac_stats_carry(pd, &statinf[carry][0], mask);
+	}
+}
+
+static irqreturn_t s6gmac_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = (struct net_device *)dev_id;
+	struct s6gmac *pd = netdev_priv(dev);
+	if (!dev)
+		return IRQ_NONE;
+	spin_lock(&pd->lock);
+	if (s6dmac_termcnt_irq(pd->rx_dma, pd->rx_chan))
+		s6gmac_rx_interrupt(dev);
+	s6gmac_rx_fillfifo(pd);
+	if (s6dmac_termcnt_irq(pd->tx_dma, pd->tx_chan))
+		s6gmac_tx_interrupt(dev);
+	s6gmac_stats_interrupt(pd, 0);
+	s6gmac_stats_interrupt(pd, 1);
+	spin_unlock(&pd->lock);
+	return IRQ_HANDLED;
+}
+
+static inline void s6gmac_set_dstaddr(struct s6gmac *pd, int n,
+	u32 addrlo, u32 addrhi, u32 masklo, u32 maskhi)
+{
+	writel(addrlo, pd->reg + S6_GMAC_HOST_DSTADDRLO(n));
+	writel(addrhi, pd->reg + S6_GMAC_HOST_DSTADDRHI(n));
+	writel(masklo, pd->reg + S6_GMAC_HOST_DSTMASKLO(n));
+	writel(maskhi, pd->reg + S6_GMAC_HOST_DSTMASKHI(n));
+}
+
+static inline void s6gmac_stop_device(struct net_device *dev)
+{
+	struct s6gmac *pd = netdev_priv(dev);
+	writel(0, pd->reg + S6_GMAC_MACCONF1);
+}
+
+static inline void s6gmac_init_device(struct net_device *dev)
+{
+	struct s6gmac *pd = netdev_priv(dev);
+	int is_rgmii = !!(pd->phydev->supported
+		& (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half));
+#if 0
+	writel(1 << S6_GMAC_MACCONF1_SYNCTX |
+		1 << S6_GMAC_MACCONF1_SYNCRX |
+		1 << S6_GMAC_MACCONF1_TXFLOWCTRL |
+		1 << S6_GMAC_MACCONF1_RXFLOWCTRL |
+		1 << S6_GMAC_MACCONF1_RESTXFUNC |
+		1 << S6_GMAC_MACCONF1_RESRXFUNC |
+		1 << S6_GMAC_MACCONF1_RESTXMACCTRL |
+		1 << S6_GMAC_MACCONF1_RESRXMACCTRL,
+		pd->reg + S6_GMAC_MACCONF1);
+#endif
+	writel(1 << S6_GMAC_MACCONF1_SOFTRES, pd->reg + S6_GMAC_MACCONF1);
+	udelay(1000);
+	writel(1 << S6_GMAC_MACCONF1_TXENA | 1 << S6_GMAC_MACCONF1_RXENA,
+		pd->reg + S6_GMAC_MACCONF1);
+	writel(1 << S6_GMAC_HOST_PBLKCTRL_TXSRES |
+		1 << S6_GMAC_HOST_PBLKCTRL_RXSRES,
+		pd->reg + S6_GMAC_HOST_PBLKCTRL);
+	writel(S6_GMAC_HOST_PBLKCTRL_SIZ_128 << S6_GMAC_HOST_PBLKCTRL_TXBSIZ |
+		S6_GMAC_HOST_PBLKCTRL_SIZ_128 << S6_GMAC_HOST_PBLKCTRL_RXBSIZ |
+		1 << S6_GMAC_HOST_PBLKCTRL_STATENA |
+		1 << S6_GMAC_HOST_PBLKCTRL_STATCLEAR |
+		is_rgmii << S6_GMAC_HOST_PBLKCTRL_RGMII,
+		pd->reg + S6_GMAC_HOST_PBLKCTRL);
+	writel(1 << S6_GMAC_MACCONF1_TXENA |
+		1 << S6_GMAC_MACCONF1_RXENA |
+		(dev->flags & IFF_LOOPBACK ? 1 : 0)
+			<< S6_GMAC_MACCONF1_LOOPBACK,
+		pd->reg + S6_GMAC_MACCONF1);
+	writel(dev->mtu && (dev->mtu < (S6_MAX_FRLEN - ETH_HLEN-ETH_FCS_LEN)) ?
+			dev->mtu+ETH_HLEN+ETH_FCS_LEN : S6_MAX_FRLEN,
+		pd->reg + S6_GMAC_MACMAXFRAMELEN);
+	writel((pd->link.full ? 1 : 0) << S6_GMAC_MACCONF2_FULL |
+		1 << S6_GMAC_MACCONF2_PADCRCENA |
+		1 << S6_GMAC_MACCONF2_LENGTHFCHK |
+		(pd->link.giga ?
+			S6_GMAC_MACCONF2_IFMODE_BYTE :
+			S6_GMAC_MACCONF2_IFMODE_NIBBLE)
+			<< S6_GMAC_MACCONF2_IFMODE |
+		7 << S6_GMAC_MACCONF2_PREAMBLELEN,
+		pd->reg + S6_GMAC_MACCONF2);
+	writel(0, pd->reg + S6_GMAC_MACSTATADDR1);
+	writel(0, pd->reg + S6_GMAC_MACSTATADDR2);
+	writel(1 << S6_GMAC_FIFOCONF0_WTMENREQ |
+		1 << S6_GMAC_FIFOCONF0_SRFENREQ |
+		1 << S6_GMAC_FIFOCONF0_FRFENREQ |
+		1 << S6_GMAC_FIFOCONF0_STFENREQ |
+		1 << S6_GMAC_FIFOCONF0_FTFENREQ,
+		pd->reg + S6_GMAC_FIFOCONF0);
+	writel(128 << S6_GMAC_FIFOCONF3_CFGFTTH |
+		128 << S6_GMAC_FIFOCONF3_CFGHWMFT,
+		pd->reg + S6_GMAC_FIFOCONF3);
+	writel((S6_GMAC_FIFOCONF_RSV_MASK & ~(
+			1 << S6_GMAC_FIFOCONF_RSV_RUNT |
+			1 << S6_GMAC_FIFOCONF_RSV_CRCERR |
+			1 << S6_GMAC_FIFOCONF_RSV_OK |
+			1 << S6_GMAC_FIFOCONF_RSV_DRIBBLE |
+			1 << S6_GMAC_FIFOCONF_RSV_CTRLFRAME |
+			1 << S6_GMAC_FIFOCONF_RSV_PAUSECTRL |
+			1 << S6_GMAC_FIFOCONF_RSV_UNOPCODE |
+			1 << S6_GMAC_FIFOCONF_RSV_TRUNCATED)) |
+		1 << S6_GMAC_FIFOCONF5_DROPLT64 |
+		pd->link.giga << S6_GMAC_FIFOCONF5_CFGBYTM |
+		1 << S6_GMAC_FIFOCONF5_RXDROPSIZE,
+		pd->reg + S6_GMAC_FIFOCONF5);
+	writel(1 << S6_GMAC_FIFOCONF_RSV_RUNT |
+		1 << S6_GMAC_FIFOCONF_RSV_CRCERR |
+		1 << S6_GMAC_FIFOCONF_RSV_DRIBBLE |
+		1 << S6_GMAC_FIFOCONF_RSV_CTRLFRAME |
+		1 << S6_GMAC_FIFOCONF_RSV_PAUSECTRL |
+		1 << S6_GMAC_FIFOCONF_RSV_UNOPCODE |
+		1 << S6_GMAC_FIFOCONF_RSV_TRUNCATED,
+		pd->reg + S6_GMAC_FIFOCONF4);
+	s6gmac_set_dstaddr(pd, 0,
+		0xFFFFFFFF, 0x0000FFFF, 0xFFFFFFFF, 0x0000FFFF);
+	s6gmac_set_dstaddr(pd, 1,
+		dev->dev_addr[5] |
+		dev->dev_addr[4] << 8 |
+		dev->dev_addr[3] << 16 |
+		dev->dev_addr[2] << 24,
+		dev->dev_addr[1] |
+		dev->dev_addr[0] << 8,
+		0xFFFFFFFF, 0x0000FFFF);
+	s6gmac_set_dstaddr(pd, 2,
+		0x00000000, 0x00000100, 0x00000000, 0x00000100);
+	s6gmac_set_dstaddr(pd, 3,
+		0x00000000, 0x00000000, 0x00000000, 0x00000000);
+	writel(1 << S6_GMAC_HOST_PBLKCTRL_TXENA |
+		1 << S6_GMAC_HOST_PBLKCTRL_RXENA |
+		S6_GMAC_HOST_PBLKCTRL_SIZ_128 << S6_GMAC_HOST_PBLKCTRL_TXBSIZ |
+		S6_GMAC_HOST_PBLKCTRL_SIZ_128 << S6_GMAC_HOST_PBLKCTRL_RXBSIZ |
+		1 << S6_GMAC_HOST_PBLKCTRL_STATENA |
+		1 << S6_GMAC_HOST_PBLKCTRL_STATCLEAR |
+		is_rgmii << S6_GMAC_HOST_PBLKCTRL_RGMII,
+		pd->reg + S6_GMAC_HOST_PBLKCTRL);
+}
+
+static void s6mii_enable(struct s6gmac *pd)
+{
+	writel(readl(pd->reg + S6_GMAC_MACCONF1) &
+		~(1 << S6_GMAC_MACCONF1_SOFTRES),
+		pd->reg + S6_GMAC_MACCONF1);
+	writel((readl(pd->reg + S6_GMAC_MACMIICONF)
+		& ~(S6_GMAC_MACMIICONF_CSEL_MASK << S6_GMAC_MACMIICONF_CSEL))
+		| (S6_GMAC_MACMIICONF_CSEL_DIV168 << S6_GMAC_MACMIICONF_CSEL),
+		pd->reg + S6_GMAC_MACMIICONF);
+}
+
+static int s6mii_busy(struct s6gmac *pd, int tmo)
+{
+	while (readl(pd->reg + S6_GMAC_MACMIIINDI)) {
+		if (--tmo == 0)
+			return -ETIME;
+		udelay(64);
+	}
+	return 0;
+}
+
+static int s6mii_read(struct mii_bus *bus, int phy_addr, int regnum)
+{
+	struct s6gmac *pd = bus->priv;
+	s6mii_enable(pd);
+	if (s6mii_busy(pd, 256))
+		return -ETIME;
+	writel(phy_addr << S6_GMAC_MACMIIADDR_PHY |
+		regnum << S6_GMAC_MACMIIADDR_REG,
+		pd->reg + S6_GMAC_MACMIIADDR);
+	writel(1 << S6_GMAC_MACMIICMD_READ, pd->reg + S6_GMAC_MACMIICMD);
+	writel(0, pd->reg + S6_GMAC_MACMIICMD);
+	if (s6mii_busy(pd, 256))
+		return -ETIME;
+	return (u16)readl(pd->reg + S6_GMAC_MACMIISTAT);
+}
+
+static int s6mii_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value)
+{
+	struct s6gmac *pd = bus->priv;
+	s6mii_enable(pd);
+	if (s6mii_busy(pd, 256))
+		return -ETIME;
+	writel(phy_addr << S6_GMAC_MACMIIADDR_PHY |
+		regnum << S6_GMAC_MACMIIADDR_REG,
+		pd->reg + S6_GMAC_MACMIIADDR);
+	writel(value, pd->reg + S6_GMAC_MACMIICTRL);
+	if (s6mii_busy(pd, 256))
+		return -ETIME;
+	return 0;
+}
+
+static int s6mii_reset(struct mii_bus *bus)
+{
+	struct s6gmac *pd = bus->priv;
+	s6mii_enable(pd);
+	if (s6mii_busy(pd, PHY_INIT_TIMEOUT))
+		return -ETIME;
+	return 0;
+}
+
+static void s6gmac_set_rgmii_txclock(struct s6gmac *pd)
+{
+	u32 pllsel = readl(S6_REG_GREG1 + S6_GREG1_PLLSEL);
+	pllsel &= ~(S6_GREG1_PLLSEL_GMAC_MASK << S6_GREG1_PLLSEL_GMAC);
+	switch (pd->link.mbit) {
+	case 10:
+		pllsel |= S6_GREG1_PLLSEL_GMAC_2500KHZ << S6_GREG1_PLLSEL_GMAC;
+		break;
+	case 100:
+		pllsel |= S6_GREG1_PLLSEL_GMAC_25MHZ << S6_GREG1_PLLSEL_GMAC;
+		break;
+	case 1000:
+		pllsel |= S6_GREG1_PLLSEL_GMAC_125MHZ << S6_GREG1_PLLSEL_GMAC;
+		break;
+	default:
+		return;
+	}
+	writel(pllsel, S6_REG_GREG1 + S6_GREG1_PLLSEL);
+}
+
+static inline void s6gmac_linkisup(struct net_device *dev, int isup)
+{
+	struct s6gmac *pd = netdev_priv(dev);
+	struct phy_device *phydev = pd->phydev;
+
+	pd->link.full = phydev->duplex;
+	pd->link.giga = (phydev->speed == 1000);
+	if (pd->link.mbit != phydev->speed) {
+		pd->link.mbit = phydev->speed;
+		s6gmac_set_rgmii_txclock(pd);
+	}
+	pd->link.isup = isup;
+	if (isup)
+		netif_carrier_on(dev);
+	phy_print_status(phydev);
+}
+
+static void s6gmac_adjust_link(struct net_device *dev)
+{
+	struct s6gmac *pd = netdev_priv(dev);
+	struct phy_device *phydev = pd->phydev;
+	if (pd->link.isup &&
+			(!phydev->link ||
+			(pd->link.mbit != phydev->speed) ||
+			(pd->link.full != phydev->duplex))) {
+		pd->link.isup = 0;
+		netif_tx_disable(dev);
+		if (!phydev->link) {
+			netif_carrier_off(dev);
+			phy_print_status(phydev);
+		}
+	}
+	if (!pd->link.isup && phydev->link) {
+		if (pd->link.full != phydev->duplex) {
+			u32 maccfg = readl(pd->reg + S6_GMAC_MACCONF2);
+			if (phydev->duplex)
+				maccfg |= 1 << S6_GMAC_MACCONF2_FULL;
+			else
+				maccfg &= ~(1 << S6_GMAC_MACCONF2_FULL);
+			writel(maccfg, pd->reg + S6_GMAC_MACCONF2);
+		}
+
+		if (pd->link.giga != (phydev->speed == 1000)) {
+			u32 fifocfg = readl(pd->reg + S6_GMAC_FIFOCONF5);
+			u32 maccfg = readl(pd->reg + S6_GMAC_MACCONF2);
+			maccfg &= ~(S6_GMAC_MACCONF2_IFMODE_MASK
+				     << S6_GMAC_MACCONF2_IFMODE);
+			if (phydev->speed == 1000) {
+				fifocfg |= 1 << S6_GMAC_FIFOCONF5_CFGBYTM;
+				maccfg |= S6_GMAC_MACCONF2_IFMODE_BYTE
+					   << S6_GMAC_MACCONF2_IFMODE;
+			} else {
+				fifocfg &= ~(1 << S6_GMAC_FIFOCONF5_CFGBYTM);
+				maccfg |= S6_GMAC_MACCONF2_IFMODE_NIBBLE
+					   << S6_GMAC_MACCONF2_IFMODE;
+			}
+			writel(fifocfg, pd->reg + S6_GMAC_FIFOCONF5);
+			writel(maccfg, pd->reg + S6_GMAC_MACCONF2);
+		}
+
+		if (!s6dmac_fifo_full(pd->tx_dma, pd->tx_chan))
+			netif_wake_queue(dev);
+		s6gmac_linkisup(dev, 1);
+	}
+}
+
+static inline int s6gmac_phy_start(struct net_device *dev)
+{
+	struct s6gmac *pd = netdev_priv(dev);
+	int i = 0;
+	struct phy_device *p = NULL;
+	while ((!(p = pd->mii.bus->phy_map[i])) && (i < PHY_MAX_ADDR))
+		i++;
+	p = phy_connect(dev, dev_name(&p->dev), &s6gmac_adjust_link, 0,
+			PHY_INTERFACE_MODE_RGMII);
+	if (IS_ERR(p)) {
+		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
+		return PTR_ERR(p);
+	}
+	p->supported &= PHY_GBIT_FEATURES;
+	p->advertising = p->supported;
+	pd->phydev = p;
+	return 0;
+}
+
+static inline void s6gmac_init_stats(struct net_device *dev)
+{
+	struct s6gmac *pd = netdev_priv(dev);
+	u32 mask;
+	mask =	1 << S6_GMAC_STATCARRY1_RDRP |
+		1 << S6_GMAC_STATCARRY1_RJBR |
+		1 << S6_GMAC_STATCARRY1_RFRG |
+		1 << S6_GMAC_STATCARRY1_ROVR |
+		1 << S6_GMAC_STATCARRY1_RUND |
+		1 << S6_GMAC_STATCARRY1_RCDE |
+		1 << S6_GMAC_STATCARRY1_RFLR |
+		1 << S6_GMAC_STATCARRY1_RALN |
+		1 << S6_GMAC_STATCARRY1_RMCA |
+		1 << S6_GMAC_STATCARRY1_RFCS |
+		1 << S6_GMAC_STATCARRY1_RPKT |
+		1 << S6_GMAC_STATCARRY1_RBYT;
+	writel(mask, pd->reg + S6_GMAC_STATCARRY(0));
+	writel(~mask, pd->reg + S6_GMAC_STATCARRYMSK(0));
+	mask =	1 << S6_GMAC_STATCARRY2_TDRP |
+		1 << S6_GMAC_STATCARRY2_TNCL |
+		1 << S6_GMAC_STATCARRY2_TXCL |
+		1 << S6_GMAC_STATCARRY2_TEDF |
+		1 << S6_GMAC_STATCARRY2_TPKT |
+		1 << S6_GMAC_STATCARRY2_TBYT |
+		1 << S6_GMAC_STATCARRY2_TFRG |
+		1 << S6_GMAC_STATCARRY2_TUND |
+		1 << S6_GMAC_STATCARRY2_TOVR |
+		1 << S6_GMAC_STATCARRY2_TFCS |
+		1 << S6_GMAC_STATCARRY2_TJBR;
+	writel(mask, pd->reg + S6_GMAC_STATCARRY(1));
+	writel(~mask, pd->reg + S6_GMAC_STATCARRYMSK(1));
+}
+
+static inline void s6gmac_init_dmac(struct net_device *dev)
+{
+	struct s6gmac *pd = netdev_priv(dev);
+	s6dmac_disable_chan(pd->tx_dma, pd->tx_chan);
+	s6dmac_disable_chan(pd->rx_dma, pd->rx_chan);
+	s6dmac_disable_error_irqs(pd->tx_dma, 1 << S6_HIFDMA_GMACTX);
+	s6dmac_disable_error_irqs(pd->rx_dma, 1 << S6_HIFDMA_GMACRX);
+}
+
+static int s6gmac_tx(struct sk_buff *skb, struct net_device *dev)
+{
+	struct s6gmac *pd = netdev_priv(dev);
+	unsigned long flags;
+	spin_lock_irqsave(&pd->lock, flags);
+	dev->trans_start = jiffies;
+	writel(skb->len << S6_GMAC_BURST_PREWR_LEN |
+		0 << S6_GMAC_BURST_PREWR_CFE |
+		1 << S6_GMAC_BURST_PREWR_PPE |
+		1 << S6_GMAC_BURST_PREWR_FCS |
+		((skb->len < ETH_ZLEN) ? 1 : 0) << S6_GMAC_BURST_PREWR_PAD,
+		pd->reg + S6_GMAC_BURST_PREWR);
+	s6dmac_put_fifo_cache(pd->tx_dma, pd->tx_chan,
+		(u32)skb->data, pd->io, skb->len);
+	if (s6dmac_fifo_full(pd->tx_dma, pd->tx_chan))
+		netif_stop_queue(dev);
+	if (((u8)(pd->tx_skb_i - pd->tx_skb_o)) >= S6_NUM_TX_SKB) {
+		printk(KERN_ERR "GMAC BUG: skb tx ring overflow [%x, %x]\n",
+			pd->tx_skb_o, pd->tx_skb_i);
+		BUG();
+	}
+	pd->tx_skb[(pd->tx_skb_i++) % S6_NUM_TX_SKB] = skb;
+	spin_unlock_irqrestore(&pd->lock, flags);
+	return 0;
+}
+
+static void s6gmac_tx_timeout(struct net_device *dev)
+{
+	struct s6gmac *pd = netdev_priv(dev);
+	unsigned long flags;
+	spin_lock_irqsave(&pd->lock, flags);
+	s6gmac_tx_interrupt(dev);
+	spin_unlock_irqrestore(&pd->lock, flags);
+}
+
+static int s6gmac_open(struct net_device *dev)
+{
+	struct s6gmac *pd = netdev_priv(dev);
+	unsigned long flags;
+	phy_read_status(pd->phydev);
+	spin_lock_irqsave(&pd->lock, flags);
+	pd->link.mbit = 0;
+	s6gmac_linkisup(dev, pd->phydev->link);
+	s6gmac_init_device(dev);
+	s6gmac_init_stats(dev);
+	s6gmac_init_dmac(dev);
+	s6gmac_rx_fillfifo(pd);
+	s6dmac_enable_chan(pd->rx_dma, pd->rx_chan,
+		2, 1, 0, 1, 0, 0, 0, 7, -1, 2, 0, 1);
+	s6dmac_enable_chan(pd->tx_dma, pd->tx_chan,
+		2, 0, 1, 0, 0, 0, 0, 7, -1, 2, 0, 1);
+	writel(0 << S6_GMAC_HOST_INT_TXBURSTOVER |
+		0 << S6_GMAC_HOST_INT_TXPREWOVER |
+		0 << S6_GMAC_HOST_INT_RXBURSTUNDER |
+		0 << S6_GMAC_HOST_INT_RXPOSTRFULL |
+		0 << S6_GMAC_HOST_INT_RXPOSTRUNDER,
+		pd->reg + S6_GMAC_HOST_INTMASK);
+	spin_unlock_irqrestore(&pd->lock, flags);
+	phy_start(pd->phydev);
+	netif_start_queue(dev);
+	return 0;
+}
+
+static int s6gmac_stop(struct net_device *dev)
+{
+	struct s6gmac *pd = netdev_priv(dev);
+	unsigned long flags;
+	netif_stop_queue(dev);
+	phy_stop(pd->phydev);
+	spin_lock_irqsave(&pd->lock, flags);
+	s6gmac_init_dmac(dev);
+	s6gmac_stop_device(dev);
+	while (pd->tx_skb_i != pd->tx_skb_o)
+		dev_kfree_skb(pd->tx_skb[(pd->tx_skb_o++) % S6_NUM_TX_SKB]);
+	while (pd->rx_skb_i != pd->rx_skb_o)
+		dev_kfree_skb(pd->rx_skb[(pd->rx_skb_o++) % S6_NUM_RX_SKB]);
+	spin_unlock_irqrestore(&pd->lock, flags);
+	return 0;
+}
+
+static struct net_device_stats *s6gmac_stats(struct net_device *dev)
+{
+	struct s6gmac *pd = netdev_priv(dev);
+	struct net_device_stats *st = (struct net_device_stats *)&pd->stats;
+	int i;
+	do {
+		unsigned long flags;
+		spin_lock_irqsave(&pd->lock, flags);
+		for (i = 0; i < sizeof(pd->stats) / sizeof(unsigned long); i++)
+			pd->stats[i] =
+				pd->carry[i] << (S6_GMAC_STAT_SIZE_MIN - 1);
+		s6gmac_stats_collect(pd, &statinf[0][0]);
+		s6gmac_stats_collect(pd, &statinf[1][0]);
+		i = s6gmac_stats_pending(pd, 0) |
+			s6gmac_stats_pending(pd, 1);
+		spin_unlock_irqrestore(&pd->lock, flags);
+	} while (i);
+	st->rx_errors = st->rx_crc_errors +
+			st->rx_frame_errors +
+			st->rx_length_errors +
+			st->rx_missed_errors;
+	st->tx_errors += st->tx_aborted_errors;
+	return st;
+}
+
+static int __devinit s6gmac_probe(struct platform_device *pdev)
+{
+	struct net_device *dev;
+	struct s6gmac *pd;
+	int res;
+	unsigned long i;
+	struct mii_bus *mb;
+	dev = alloc_etherdev(sizeof(*pd));
+	if (!dev) {
+		printk(KERN_ERR DRV_PRMT "etherdev alloc failed, aborting.\n");
+		return -ENOMEM;
+	}
+	dev->open = s6gmac_open;
+	dev->stop = s6gmac_stop;
+	dev->hard_start_xmit = s6gmac_tx;
+	dev->tx_timeout = s6gmac_tx_timeout;
+	dev->watchdog_timeo = HZ;
+	dev->get_stats = s6gmac_stats;
+	dev->irq = platform_get_irq(pdev, 0);
+	pd = netdev_priv(dev);
+	memset(pd, 0, sizeof(*pd));
+	spin_lock_init(&pd->lock);
+	pd->reg = platform_get_resource(pdev, IORESOURCE_MEM, 0)->start;
+	i = platform_get_resource(pdev, IORESOURCE_DMA, 0)->start;
+	pd->tx_dma = DMA_MASK_DMAC(i);
+	pd->tx_chan = DMA_INDEX_CHNL(i);
+	i = platform_get_resource(pdev, IORESOURCE_DMA, 1)->start;
+	pd->rx_dma = DMA_MASK_DMAC(i);
+	pd->rx_chan = DMA_INDEX_CHNL(i);
+	pd->io = platform_get_resource(pdev, IORESOURCE_IO, 0)->start;
+	res = request_irq(dev->irq, &s6gmac_interrupt, 0, dev->name, dev);
+	if (res) {
+		printk(KERN_ERR DRV_PRMT "irq request failed: %d\n", dev->irq);
+		goto errirq;
+	}
+	res = register_netdev(dev);
+	if (res) {
+		printk(KERN_ERR DRV_PRMT "error registering device %s\n",
+			dev->name);
+		goto errdev;
+	}
+	mb = mdiobus_alloc();
+	if (!mb) {
+		printk(KERN_ERR DRV_PRMT "error allocating mii bus\n");
+		goto errmii;
+	}
+	mb->name = "s6gmac_mii";
+	mb->read = s6mii_read;
+	mb->write = s6mii_write;
+	mb->reset = s6mii_reset;
+	mb->priv = pd;
+	snprintf(mb->id, MII_BUS_ID_SIZE, "0");
+	mb->phy_mask = ~(1 << 0);
+	mb->irq = &pd->mii.irq[0];
+	for (i = 0; i < PHY_MAX_ADDR; i++) {
+		int n = platform_get_irq(pdev, i + 1);
+		if (n < 0)
+			n = PHY_POLL;
+		pd->mii.irq[i] = n;
+	}
+	mdiobus_register(mb);
+	pd->mii.bus = mb;
+	res = s6gmac_phy_start(dev);
+	if (res)
+		return res;
+	platform_set_drvdata(pdev, dev);
+	return 0;
+errmii:
+	unregister_netdev(dev);
+errdev:
+	free_irq(dev->irq, dev);
+errirq:
+	free_netdev(dev);
+	return res;
+}
+
+static int __devexit s6gmac_remove(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	if (dev) {
+		struct s6gmac *pd = netdev_priv(dev);
+		mdiobus_unregister(pd->mii.bus);
+		unregister_netdev(dev);
+		free_irq(dev->irq, dev);
+		free_netdev(dev);
+		platform_set_drvdata(pdev, NULL);
+	}
+	return 0;
+}
+
+static struct platform_driver s6gmac_driver = {
+	.probe = s6gmac_probe,
+	.remove = __devexit_p(s6gmac_remove),
+	.driver = {
+		.name = "s6gmac",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init s6gmac_init(void)
+{
+	printk(KERN_INFO DRV_PRMT "S6 GMAC ethernet driver\n");
+	return platform_driver_register(&s6gmac_driver);
+}
+
+
+static void __exit s6gmac_exit(void)
+{
+	platform_driver_unregister(&s6gmac_driver);
+}
+
+module_init(s6gmac_init);
+module_exit(s6gmac_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("S6105 on chip Ethernet driver");
+MODULE_AUTHOR("Oskar Schirmer <os@emlix.com>");
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index e2247669a49..1f040e8a000 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -1281,7 +1281,7 @@ static u16 sis190_default_phy(struct net_device *dev)
 		else if (phy_lan)
 			phy_default = phy_lan;
 		else
-			phy_default = list_entry(&tp->first_phy,
+			phy_default = list_first_entry(&tp->first_phy,
 						 struct sis190_phy, list);
 	}
 
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 6b5946fe8ae..7681d28c53d 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -50,7 +50,7 @@
 #include "sky2.h"
 
 #define DRV_NAME		"sky2"
-#define DRV_VERSION		"1.22"
+#define DRV_VERSION		"1.23"
 #define PFX			DRV_NAME " "
 
 /*
@@ -65,9 +65,9 @@
 #define RX_DEF_PENDING		RX_MAX_PENDING
 
 #define TX_RING_SIZE		512
-#define TX_DEF_PENDING		(TX_RING_SIZE - 1)
-#define TX_MIN_PENDING		64
+#define TX_DEF_PENDING		128
 #define MAX_SKB_TX_LE		(4 + (sizeof(dma_addr_t)/sizeof(u32))*MAX_SKB_FRAGS)
+#define TX_MIN_PENDING		(MAX_SKB_TX_LE+1)
 
 #define STATUS_RING_SIZE	2048	/* 2 ports * (TX + 2*RX) */
 #define STATUS_LE_BYTES		(STATUS_RING_SIZE*sizeof(struct sky2_status_le))
@@ -1151,7 +1151,14 @@ stopped:
 
 	/* reset the Rx prefetch unit */
 	sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
-	mmiowb();
+
+	/* Reset the RAM Buffer receive queue */
+	sky2_write8(hw, RB_ADDR(rxq, RB_CTRL), RB_RST_SET);
+
+	/* Reset Rx MAC FIFO */
+	sky2_write8(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), GMF_RST_SET);
+
+	sky2_read8(hw, B0_CTST);
 }
 
 /* Clean out receive buffer area, assumes receiver hardware stopped */
@@ -1169,6 +1176,7 @@ static void sky2_rx_clean(struct sky2_port *sky2)
 			re->skb = NULL;
 		}
 	}
+	skb_queue_purge(&sky2->rx_recycle);
 }
 
 /* Basic MII support */
@@ -1245,6 +1253,12 @@ static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp
 }
 #endif
 
+/* Amount of required worst case padding in rx buffer */
+static inline unsigned sky2_rx_pad(const struct sky2_hw *hw)
+{
+	return (hw->flags & SKY2_HW_RAM_BUFFER) ? 8 : 2;
+}
+
 /*
  * Allocate an skb for receiving. If the MTU is large enough
  * make the skb non-linear with a fragment list of pages.
@@ -1254,6 +1268,13 @@ static struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2)
 	struct sk_buff *skb;
 	int i;
 
+	skb = __skb_dequeue(&sky2->rx_recycle);
+	if (!skb)
+		skb = netdev_alloc_skb(sky2->netdev, sky2->rx_data_size
+				       + sky2_rx_pad(sky2->hw));
+	if (!skb)
+		goto nomem;
+
 	if (sky2->hw->flags & SKY2_HW_RAM_BUFFER) {
 		unsigned char *start;
 		/*
@@ -1262,18 +1283,10 @@ static struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2)
 		 * The buffer returned from netdev_alloc_skb is
 		 * aligned except if slab debugging is enabled.
 		 */
-		skb = netdev_alloc_skb(sky2->netdev, sky2->rx_data_size + 8);
-		if (!skb)
-			goto nomem;
 		start = PTR_ALIGN(skb->data, 8);
 		skb_reserve(skb, start - skb->data);
-	} else {
-		skb = netdev_alloc_skb(sky2->netdev,
-				       sky2->rx_data_size + NET_IP_ALIGN);
-		if (!skb)
-			goto nomem;
+	} else
 		skb_reserve(skb, NET_IP_ALIGN);
-	}
 
 	for (i = 0; i < sky2->rx_nfrags; i++) {
 		struct page *page = alloc_page(GFP_ATOMIC);
@@ -1350,6 +1363,8 @@ static int sky2_rx_start(struct sky2_port *sky2)
 
 	sky2->rx_data_size = size;
 
+	skb_queue_head_init(&sky2->rx_recycle);
+
 	/* Fill Rx ring */
 	for (i = 0; i < sky2->rx_pending; i++) {
 		re = sky2->rx_ring + i;
@@ -1488,6 +1503,7 @@ static int sky2_up(struct net_device *dev)
 	imask = sky2_read32(hw, B0_IMSK);
 	imask |= portirq_msk[port];
 	sky2_write32(hw, B0_IMSK, imask);
+	sky2_read32(hw, B0_IMSK);
 
 	sky2_set_multicast(dev);
 
@@ -1756,14 +1772,22 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
 		}
 
 		if (le->ctrl & EOP) {
+			struct sk_buff *skb = re->skb;
+
 			if (unlikely(netif_msg_tx_done(sky2)))
 				printk(KERN_DEBUG "%s: tx done %u\n",
 				       dev->name, idx);
 
 			dev->stats.tx_packets++;
-			dev->stats.tx_bytes += re->skb->len;
+			dev->stats.tx_bytes += skb->len;
+
+			if (skb_queue_len(&sky2->rx_recycle) < sky2->rx_pending
+			    && skb_recycle_check(skb, sky2->rx_data_size
+						 + sky2_rx_pad(sky2->hw)))
+				__skb_queue_head(&sky2->rx_recycle, skb);
+			else
+				dev_kfree_skb_any(skb);
 
-			dev_kfree_skb_any(re->skb);
 			sky2->tx_next = RING_NEXT(idx, TX_RING_SIZE);
 		}
 	}
@@ -1805,10 +1829,10 @@ static int sky2_down(struct net_device *dev)
 	imask = sky2_read32(hw, B0_IMSK);
 	imask &= ~portirq_msk[port];
 	sky2_write32(hw, B0_IMSK, imask);
+	sky2_read32(hw, B0_IMSK);
 
-	synchronize_irq(hw->pdev->irq);
-
-	sky2_gmac_reset(hw, port);
+	/* Force flow control off */
+	sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
 
 	/* Stop transmitter */
 	sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_STOP);
@@ -1821,9 +1845,6 @@ static int sky2_down(struct net_device *dev)
 	ctrl &= ~(GM_GPCR_TX_ENA | GM_GPCR_RX_ENA);
 	gma_write16(hw, port, GM_GP_CTRL, ctrl);
 
-	/* Make sure no packets are pending */
-	napi_synchronize(&hw->napi);
-
 	sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
 
 	/* Workaround shared GMAC reset */
@@ -1854,6 +1875,15 @@ static int sky2_down(struct net_device *dev)
 	sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
 	sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
 
+	/* Force any delayed status interrrupt and NAPI */
+	sky2_write32(hw, STAT_LEV_TIMER_CNT, 0);
+	sky2_write32(hw, STAT_TX_TIMER_CNT, 0);
+	sky2_write32(hw, STAT_ISR_TIMER_CNT, 0);
+	sky2_read8(hw, STAT_ISR_TIMER_CTRL);
+
+	synchronize_irq(hw->pdev->irq);
+	napi_synchronize(&hw->napi);
+
 	sky2_phy_power_down(hw, port);
 
 	/* turn off LED's */
@@ -2343,11 +2373,45 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last)
 	}
 }
 
+static inline void sky2_skb_rx(const struct sky2_port *sky2,
+			       u32 status, struct sk_buff *skb)
+{
+#ifdef SKY2_VLAN_TAG_USED
+	u16 vlan_tag = be16_to_cpu(sky2->rx_tag);
+	if (sky2->vlgrp && (status & GMR_FS_VLAN)) {
+		if (skb->ip_summed == CHECKSUM_NONE)
+			vlan_hwaccel_receive_skb(skb, sky2->vlgrp, vlan_tag);
+		else
+			vlan_gro_receive(&sky2->hw->napi, sky2->vlgrp,
+					 vlan_tag, skb);
+		return;
+	}
+#endif
+	if (skb->ip_summed == CHECKSUM_NONE)
+		netif_receive_skb(skb);
+	else
+		napi_gro_receive(&sky2->hw->napi, skb);
+}
+
+static inline void sky2_rx_done(struct sky2_hw *hw, unsigned port,
+				unsigned packets, unsigned bytes)
+{
+	if (packets) {
+		struct net_device *dev = hw->dev[port];
+
+		dev->stats.rx_packets += packets;
+		dev->stats.rx_bytes += bytes;
+		dev->last_rx = jiffies;
+		sky2_rx_update(netdev_priv(dev), rxqaddr[port]);
+	}
+}
+
 /* Process status response ring */
 static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
 {
 	int work_done = 0;
-	unsigned rx[2] = { 0, 0 };
+	unsigned int total_bytes[2] = { 0 };
+	unsigned int total_packets[2] = { 0 };
 
 	rmb();
 	do {
@@ -2374,7 +2438,8 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
 		le->opcode = 0;
 		switch (opcode & ~HW_OWNER) {
 		case OP_RXSTAT:
-			++rx[port];
+			total_packets[port]++;
+			total_bytes[port] += length;
 			skb = sky2_receive(dev, length, status);
 			if (unlikely(!skb)) {
 				dev->stats.rx_dropped++;
@@ -2392,18 +2457,8 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
 			}
 
 			skb->protocol = eth_type_trans(skb, dev);
-			dev->stats.rx_packets++;
-			dev->stats.rx_bytes += skb->len;
-			dev->last_rx = jiffies;
 
-#ifdef SKY2_VLAN_TAG_USED
-			if (sky2->vlgrp && (status & GMR_FS_VLAN)) {
-				vlan_hwaccel_receive_skb(skb,
-							 sky2->vlgrp,
-							 be16_to_cpu(sky2->rx_tag));
-			} else
-#endif
-				netif_receive_skb(skb);
+			sky2_skb_rx(sky2, status, skb);
 
 			/* Stop after net poll weight */
 			if (++work_done >= to_do)
@@ -2473,11 +2528,8 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
 	sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
 
 exit_loop:
-	if (rx[0])
-		sky2_rx_update(netdev_priv(hw->dev[0]), Q_R1);
-
-	if (rx[1])
-		sky2_rx_update(netdev_priv(hw->dev[1]), Q_R2);
+	sky2_rx_done(hw, 0, total_packets[0], total_bytes[0]);
+	sky2_rx_done(hw, 1, total_packets[1], total_bytes[1]);
 
 	return work_done;
 }
@@ -4364,6 +4416,22 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
 		goto err_out;
 	}
 
+	/* Get configuration information
+	 * Note: only regular PCI config access once to test for HW issues
+	 *       other PCI access through shared memory for speed and to
+	 *	 avoid MMCONFIG problems.
+	 */
+	err = pci_read_config_dword(pdev, PCI_DEV_REG2, &reg);
+	if (err) {
+		dev_err(&pdev->dev, "PCI read config failed\n");
+		goto err_out;
+	}
+
+	if (~reg == 0) {
+		dev_err(&pdev->dev, "PCI configuration read error\n");
+		goto err_out;
+	}
+
 	err = pci_request_regions(pdev, DRV_NAME);
 	if (err) {
 		dev_err(&pdev->dev, "cannot obtain PCI resources\n");
@@ -4389,21 +4457,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
 		}
 	}
 
-	/* Get configuration information
-	 * Note: only regular PCI config access once to test for HW issues
-	 *       other PCI access through shared memory for speed and to
-	 *	 avoid MMCONFIG problems.
-	 */
-	err = pci_read_config_dword(pdev, PCI_DEV_REG2, &reg);
-	if (err) {
-		dev_err(&pdev->dev, "PCI read config failed\n");
-		goto err_out_free_regions;
-	}
-
-	/* size of available VPD, only impact sysfs */
-	err = pci_vpd_truncate(pdev, 1ul << (((reg & PCI_VPD_ROM_SZ) >> 14) + 8));
-	if (err)
-		dev_warn(&pdev->dev, "Can't set VPD size\n");
 
 #ifdef __BIG_ENDIAN
 	/* The sk98lin vendor driver uses hardware byte swapping but
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 92fb24b27d4..b5549c9e510 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -2028,6 +2028,7 @@ struct sky2_port {
 	u16		     rx_pending;
 	u16		     rx_data_size;
 	u16		     rx_nfrags;
+	struct sk_buff_head  rx_recycle;
 
 #ifdef SKY2_VLAN_TAG_USED
 	u16		     rx_tag;
diff --git a/drivers/net/sonic.c b/drivers/net/sonic.c
index e4255d82938..753a1fba460 100644
--- a/drivers/net/sonic.c
+++ b/drivers/net/sonic.c
@@ -223,7 +223,7 @@ static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev)
 	if (!laddr) {
 		printk(KERN_ERR "%s: failed to map tx DMA buffer.\n", dev->name);
 		dev_kfree_skb(skb);
-		return NETDEV_TX_BUSY
+		return NETDEV_TX_BUSY;
 	}
 
 	sonic_tda_put(dev, entry, SONIC_TD_STATUS, 0);       /* clear status */
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index e2f2e91cfdd..40c6eba775c 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -65,8 +65,6 @@
 
 static DEFINE_SPINLOCK(ugeth_lock);
 
-static void uec_configure_serdes(struct net_device *dev);
-
 static struct {
 	u32 msg_enable;
 } debug = { -1 };
@@ -1536,6 +1534,49 @@ static void adjust_link(struct net_device *dev)
 	spin_unlock_irqrestore(&ugeth->lock, flags);
 }
 
+/* Initialize TBI PHY interface for communicating with the
+ * SERDES lynx PHY on the chip.  We communicate with this PHY
+ * through the MDIO bus on each controller, treating it as a
+ * "normal" PHY at the address found in the UTBIPA register.  We assume
+ * that the UTBIPA register is valid.  Either the MDIO bus code will set
+ * it to a value that doesn't conflict with other PHYs on the bus, or the
+ * value doesn't matter, as there are no other PHYs on the bus.
+ */
+static void uec_configure_serdes(struct net_device *dev)
+{
+	struct ucc_geth_private *ugeth = netdev_priv(dev);
+	struct ucc_geth_info *ug_info = ugeth->ug_info;
+	struct phy_device *tbiphy;
+
+	if (!ug_info->tbi_node) {
+		dev_warn(&dev->dev, "SGMII mode requires that the device "
+			"tree specify a tbi-handle\n");
+		return;
+	}
+
+	tbiphy = of_phy_find_device(ug_info->tbi_node);
+	if (!tbiphy) {
+		dev_err(&dev->dev, "error: Could not get TBI device\n");
+		return;
+	}
+
+	/*
+	 * If the link is already up, we must already be ok, and don't need to
+	 * configure and reset the TBI<->SerDes link.  Maybe U-Boot configured
+	 * everything for us?  Resetting it takes the link down and requires
+	 * several seconds for it to come back.
+	 */
+	if (phy_read(tbiphy, ENET_TBI_MII_SR) & TBISR_LSTATUS)
+		return;
+
+	/* Single clk mode, mii mode off(for serdes communication) */
+	phy_write(tbiphy, ENET_TBI_MII_ANA, TBIANA_SETTINGS);
+
+	phy_write(tbiphy, ENET_TBI_MII_TBICON, TBICON_CLK_SELECT);
+
+	phy_write(tbiphy, ENET_TBI_MII_CR, TBICR_SETTINGS);
+}
+
 /* Configure the PHY for dev.
  * returns 0 if success.  -1 if failure
  */
@@ -1577,41 +1618,7 @@ static int init_phy(struct net_device *dev)
 	return 0;
 }
 
-/* Initialize TBI PHY interface for communicating with the
- * SERDES lynx PHY on the chip.  We communicate with this PHY
- * through the MDIO bus on each controller, treating it as a
- * "normal" PHY at the address found in the UTBIPA register.  We assume
- * that the UTBIPA register is valid.  Either the MDIO bus code will set
- * it to a value that doesn't conflict with other PHYs on the bus, or the
- * value doesn't matter, as there are no other PHYs on the bus.
- */
-static void uec_configure_serdes(struct net_device *dev)
-{
-	struct ucc_geth_private *ugeth = netdev_priv(dev);
-
-	if (!ugeth->tbiphy) {
-		printk(KERN_WARNING "SGMII mode requires that the device "
-			"tree specify a tbi-handle\n");
-	return;
-	}
 
-	/*
-	 * If the link is already up, we must already be ok, and don't need to
-	 * configure and reset the TBI<->SerDes link.  Maybe U-Boot configured
-	 * everything for us?  Resetting it takes the link down and requires
-	 * several seconds for it to come back.
-	 */
-	if (phy_read(ugeth->tbiphy, ENET_TBI_MII_SR) & TBISR_LSTATUS)
-		return;
-
-	/* Single clk mode, mii mode off(for serdes communication) */
-	phy_write(ugeth->tbiphy, ENET_TBI_MII_ANA, TBIANA_SETTINGS);
-
-	phy_write(ugeth->tbiphy, ENET_TBI_MII_TBICON, TBICON_CLK_SELECT);
-
-	phy_write(ugeth->tbiphy, ENET_TBI_MII_CR, TBICR_SETTINGS);
-
-}
 
 static int ugeth_graceful_stop_tx(struct ucc_geth_private *ugeth)
 {
@@ -3711,6 +3718,9 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 	}
 	ug_info->phy_node = phy;
 
+	/* Find the TBI PHY node.  If it's not there, we don't support SGMII */
+	ug_info->tbi_node = of_parse_phandle(np, "tbi-handle", 0);
+
 	/* get the phy interface type, or default to MII */
 	prop = of_get_property(np, "phy-connection-type", NULL);
 	if (!prop) {
@@ -3818,37 +3828,6 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 	ugeth->ndev = dev;
 	ugeth->node = np;
 
-	/* Find the TBI PHY.  If it's not there, we don't support SGMII */
-	ph = of_get_property(np, "tbi-handle", NULL);
-	if (ph) {
-		struct device_node *tbi = of_find_node_by_phandle(*ph);
-		struct of_device *ofdev;
-		struct mii_bus *bus;
-		const unsigned int *id;
-
-		if (!tbi)
-			return 0;
-
-		mdio = of_get_parent(tbi);
-		if (!mdio)
-			return 0;
-
-		ofdev = of_find_device_by_node(mdio);
-
-		of_node_put(mdio);
-
-		id = of_get_property(tbi, "reg", NULL);
-		if (!id)
-			return 0;
-		of_node_put(tbi);
-
-		bus = dev_get_drvdata(&ofdev->dev);
-		if (!bus)
-			return 0;
-
-		ugeth->tbiphy = bus->phy_map[*id];
-	}
-
 	return 0;
 }
 
diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h
index 5beba4c1453..195ab267ead 100644
--- a/drivers/net/ucc_geth.h
+++ b/drivers/net/ucc_geth.h
@@ -1125,6 +1125,7 @@ struct ucc_geth_info {
 	u16 pausePeriod;
 	u16 extensionField;
 	struct device_node *phy_node;
+	struct device_node *tbi_node;
 	u8 weightfactor[NUM_TX_QUEUES];
 	u8 interruptcoalescingmaxvalue[NUM_RX_QUEUES];
 	u8 l2qt[UCC_GETH_VLAN_PRIORITY_MAX];
@@ -1213,7 +1214,6 @@ struct ucc_geth_private {
 
 	struct ugeth_mii_info *mii_info;
 	struct phy_device *phydev;
-	struct phy_device *tbiphy;
 	phy_interface_t phy_interface;
 	int max_speed;
 	uint32_t msg_enable;
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 3717569828b..a906d399813 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -169,10 +169,12 @@ config USB_NET_CDCETHER
 	  The Linux-USB CDC Ethernet Gadget driver is an open implementation.
  	  This driver should work with at least the following devices:
 
+	    * Dell Wireless 5530 HSPA
  	    * Ericsson PipeRider (all variants)
+	    * Ericsson Mobile Broadband Module (all variants)
  	    * Motorola (DM100 and SB4100)
  	    * Broadcom Cable Modem (reference design)
- 	    * Toshiba PCX1100U
+	    * Toshiba (PCX1100U and F3507g)
 	    * ...
 
 	  This driver creates an interface named "ethX", where X depends on
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index 01fd528306e..4a6aff57940 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -533,6 +533,31 @@ static const struct usb_device_id	products [] = {
 	USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1900, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
 	.driver_info = (unsigned long) &cdc_info,
+}, {
+	/* Ericsson F3507g ver. 2 */
+	USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1902, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long) &cdc_info,
+}, {
+	/* Ericsson F3607gw */
+	USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1904, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long) &cdc_info,
+}, {
+	/* Ericsson F3307 */
+	USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1906, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long) &cdc_info,
+}, {
+	/* Toshiba F3507g */
+	USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130b, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long) &cdc_info,
+}, {
+	/* Dell F3507g */
+	USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8147, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long) &cdc_info,
 },
 	{ },		// END
 };
diff --git a/drivers/net/usb/cdc_subset.c b/drivers/net/usb/cdc_subset.c
index c66b9c324f5..ca39ace0b0e 100644
--- a/drivers/net/usb/cdc_subset.c
+++ b/drivers/net/usb/cdc_subset.c
@@ -307,9 +307,10 @@ static const struct usb_device_id	products [] = {
 	USB_DEVICE (0x1286, 0x8001),    // "blob" bootloader
 	.driver_info =  (unsigned long) &blob_info,
 }, {
-	// Linux Ethernet/RNDIS gadget on pxa210/25x/26x, second config
-	// e.g. Gumstix, current OpenZaurus, ...
-	USB_DEVICE_VER (0x0525, 0xa4a2, 0x0203, 0x0203),
+	// Linux Ethernet/RNDIS gadget, mostly on PXA, second config
+	// e.g. Gumstix, current OpenZaurus, ... or anything else
+	// that just enables this gadget option.
+	USB_DEVICE (0x0525, 0xa4a2),
 	.driver_info =	(unsigned long) &linuxdev_info,
 },
 #endif
diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index 2138535f233..73acbd244aa 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -297,7 +297,7 @@ static int update_eth_regs_async(pegasus_t * pegasus)
 
 	pegasus->dr.bRequestType = PEGASUS_REQT_WRITE;
 	pegasus->dr.bRequest = PEGASUS_REQ_SET_REGS;
-	pegasus->dr.wValue = 0;
+	pegasus->dr.wValue = cpu_to_le16(0);
 	pegasus->dr.wIndex = cpu_to_le16(EthCtrl0);
 	pegasus->dr.wLength = cpu_to_le16(3);
 	pegasus->ctrl_urb->transfer_buffer_length = 3;
@@ -446,11 +446,12 @@ static int write_eprom_word(pegasus_t * pegasus, __u8 index, __u16 data)
 	int i;
 	__u8 tmp, d[4] = { 0x3f, 0, 0, EPROM_WRITE };
 	int ret;
+	__le16 le_data = cpu_to_le16(data);
 
 	set_registers(pegasus, EpromOffset, 4, d);
 	enable_eprom_write(pegasus);
 	set_register(pegasus, EpromOffset, index);
-	set_registers(pegasus, EpromData, 2, &data);
+	set_registers(pegasus, EpromData, 2, &le_data);
 	set_register(pegasus, EpromCtrl, EPROM_WRITE);
 
 	for (i = 0; i < REG_TIMEOUT; i++) {
@@ -923,29 +924,32 @@ static struct net_device_stats *pegasus_netdev_stats(struct net_device *dev)
 
 static inline void disable_net_traffic(pegasus_t * pegasus)
 {
-	int tmp = 0;
+	__le16 tmp = cpu_to_le16(0);
 
-	set_registers(pegasus, EthCtrl0, 2, &tmp);
+	set_registers(pegasus, EthCtrl0, sizeof(tmp), &tmp);
 }
 
 static inline void get_interrupt_interval(pegasus_t * pegasus)
 {
-	__u8 data[2];
+	u16 data;
+	u8 interval;
 
-	read_eprom_word(pegasus, 4, (__u16 *) data);
+	read_eprom_word(pegasus, 4, &data);
+	interval = data >> 8;
 	if (pegasus->usb->speed != USB_SPEED_HIGH) {
-		if (data[1] < 0x80) {
+		if (interval < 0x80) {
 			if (netif_msg_timer(pegasus))
 				dev_info(&pegasus->intf->dev, "intr interval "
 					"changed from %ums to %ums\n",
-					data[1], 0x80);
-			data[1] = 0x80;
+					interval, 0x80);
+			interval = 0x80;
+			data = (data & 0x00FF) | ((u16)interval << 8);
 #ifdef PEGASUS_WRITE_EEPROM
-			write_eprom_word(pegasus, 4, *(__u16 *) data);
+			write_eprom_word(pegasus, 4, data);
 #endif
 		}
 	}
-	pegasus->intr_interval = data[1];
+	pegasus->intr_interval = interval;
 }
 
 static void set_carrier(struct net_device *net)
@@ -1299,7 +1303,8 @@ static int pegasus_blacklisted(struct usb_device *udev)
 	/* Special quirk to keep the driver from handling the Belkin Bluetooth
 	 * dongle which happens to have the same ID.
 	 */
-	if ((udd->idVendor == VENDOR_BELKIN && udd->idProduct == 0x0121) &&
+	if ((udd->idVendor == cpu_to_le16(VENDOR_BELKIN)) &&
+	    (udd->idProduct == cpu_to_le16(0x0121)) &&
 	    (udd->bDeviceClass == USB_CLASS_WIRELESS_CONTROLLER) &&
 	    (udd->bDeviceProtocol == 1))
 		return 1;
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index e2a7725e567..3ba35956327 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -989,8 +989,10 @@ static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_devi
 	if (ret < 0)
 		goto err_iounmap;
 
-	if (velocity_get_link(dev))
+	if (!velocity_get_link(dev)) {
 		netif_carrier_off(dev);
+		vptr->mii_status |= VELOCITY_LINK_FAIL;
+	}
 
 	velocity_print_info(vptr);
 	pci_set_drvdata(pdev, dev);
@@ -1845,7 +1847,7 @@ static void velocity_free_tx_buf(struct velocity_info *vptr, struct velocity_td_
 	 */
 	if (tdinfo->skb_dma) {
 
-		pktlen = (skb->len > ETH_ZLEN ? : ETH_ZLEN);
+		pktlen = max_t(unsigned int, skb->len, ETH_ZLEN);
 		for (i = 0; i < tdinfo->nskb_dma; i++) {
 #ifdef VELOCITY_ZERO_COPY_SUPPORT
 			pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i], le16_to_cpu(td->tdesc1.len), PCI_DMA_TODEVICE);
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 52198f6797a..2a6e81d5b57 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -709,7 +709,7 @@ static void virtnet_set_rx_mode(struct net_device *dev)
 			 allmulti ? "en" : "dis");
 
 	/* MAC filter - use one buffer for both lists */
-	mac_data = buf = kzalloc(((dev->uc_count + dev->mc_count) * ETH_ALEN) +
+	mac_data = buf = kzalloc(((dev->uc.count + dev->mc_count) * ETH_ALEN) +
 				 (2 * sizeof(mac_data->entries)), GFP_ATOMIC);
 	if (!buf) {
 		dev_warn(&dev->dev, "No memory for MAC address buffer\n");
@@ -719,16 +719,16 @@ static void virtnet_set_rx_mode(struct net_device *dev)
 	sg_init_table(sg, 2);
 
 	/* Store the unicast list and count in the front of the buffer */
-	mac_data->entries = dev->uc_count;
+	mac_data->entries = dev->uc.count;
 	i = 0;
-	list_for_each_entry(ha, &dev->uc_list, list)
+	list_for_each_entry(ha, &dev->uc.list, list)
 		memcpy(&mac_data->macs[i++][0], ha->addr, ETH_ALEN);
 
 	sg_set_buf(&sg[0], mac_data,
-		   sizeof(mac_data->entries) + (dev->uc_count * ETH_ALEN));
+		   sizeof(mac_data->entries) + (dev->uc.count * ETH_ALEN));
 
 	/* multicast list and count fill the end */
-	mac_data = (void *)&mac_data->macs[dev->uc_count][0];
+	mac_data = (void *)&mac_data->macs[dev->uc.count][0];
 
 	mac_data->entries = dev->mc_count;
 	addr = dev->mc_list;
diff --git a/drivers/net/vxge/vxge-config.c b/drivers/net/vxge/vxge-config.c
index 26cde573af4..58d2551c78e 100644
--- a/drivers/net/vxge/vxge-config.c
+++ b/drivers/net/vxge/vxge-config.c
@@ -454,7 +454,7 @@ __vxge_hw_verify_pci_e_info(struct __vxge_hw_device *hldev)
 	return VXGE_HW_OK;
 }
 
-static enum vxge_hw_status
+enum vxge_hw_status
 __vxge_hw_device_is_privilaged(struct __vxge_hw_device *hldev)
 {
 	if ((hldev->host_type == VXGE_HW_NO_MR_NO_SR_NORMAL_FUNCTION ||
@@ -676,10 +676,12 @@ enum vxge_hw_status __vxge_hw_device_initialize(struct __vxge_hw_device *hldev)
 {
 	enum vxge_hw_status status = VXGE_HW_OK;
 
-	/* Validate the pci-e link width and speed */
-	status = __vxge_hw_verify_pci_e_info(hldev);
-	if (status != VXGE_HW_OK)
-		goto exit;
+	if (VXGE_HW_OK == __vxge_hw_device_is_privilaged(hldev)) {
+		/* Validate the pci-e link width and speed */
+		status = __vxge_hw_verify_pci_e_info(hldev);
+		if (status != VXGE_HW_OK)
+			goto exit;
+	}
 
 	vxge_hw_wrr_rebalance(hldev);
 exit:
diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c
index 6c838b3e063..6034497536a 100644
--- a/drivers/net/vxge/vxge-main.c
+++ b/drivers/net/vxge/vxge-main.c
@@ -4203,6 +4203,16 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
 		max_vpath_supported++;
 	}
 
+	/* Enable SRIOV mode, if firmware has SRIOV support and if it is a PF */
+	if ((VXGE_HW_FUNCTION_MODE_SRIOV ==
+		ll_config.device_hw_info.function_mode) &&
+		(max_config_dev > 1) && (pdev->is_physfn)) {
+			ret = pci_enable_sriov(pdev, max_config_dev - 1);
+			if (ret)
+				vxge_debug_ll_config(VXGE_ERR,
+					"Failed to enable SRIOV: %d \n", ret);
+	}
+
 	/*
 	 * Configure vpaths and get driver configured number of vpaths
 	 * which is less than or equal to the maximum vpaths per function.
@@ -4366,6 +4376,7 @@ _exit6:
 
 	vxge_device_unregister(hldev);
 _exit5:
+	pci_disable_sriov(pdev);
 	vxge_hw_device_terminate(hldev);
 _exit4:
 	iounmap(attr.bar1);
@@ -4429,6 +4440,8 @@ vxge_remove(struct pci_dev *pdev)
 	iounmap(vdev->bar0);
 	iounmap(vdev->bar1);
 
+	pci_disable_sriov(pdev);
+
 	/* we are safe to free it now */
 	free_netdev(dev);
 
diff --git a/drivers/net/vxge/vxge-version.h b/drivers/net/vxge/vxge-version.h
index 7da02c545ed..82786ffb7dd 100644
--- a/drivers/net/vxge/vxge-version.h
+++ b/drivers/net/vxge/vxge-version.h
@@ -17,7 +17,7 @@
 
 #define VXGE_VERSION_MAJOR	"2"
 #define VXGE_VERSION_MINOR	"0"
-#define VXGE_VERSION_FIX	"1"
-#define VXGE_VERSION_BUILD	"17129"
+#define VXGE_VERSION_FIX	"4"
+#define VXGE_VERSION_BUILD	"17795"
 #define VXGE_VERSION_FOR	"k"
 #endif
diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c
index 2dd78d20eb0..aff4f6bdf3d 100644
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/net/wan/lapbether.c
@@ -149,46 +149,40 @@ static int lapbeth_data_indication(struct net_device *dev, struct sk_buff *skb)
  */
 static int lapbeth_xmit(struct sk_buff *skb, struct net_device *dev)
 {
-	int err = -ENODEV;
+	int err;
 
 	/*
 	 * Just to be *really* sure not to send anything if the interface
 	 * is down, the ethernet device may have gone.
 	 */
-	if (!netif_running(dev)) {
+	if (!netif_running(dev))
 		goto drop;
-	}
 
 	switch (skb->data[0]) {
 	case 0x00:
-		err = 0;
 		break;
 	case 0x01:
 		if ((err = lapb_connect_request(dev)) != LAPB_OK)
 			printk(KERN_ERR "lapbeth: lapb_connect_request "
 			       "error: %d\n", err);
-		goto drop_ok;
+		goto drop;
 	case 0x02:
 		if ((err = lapb_disconnect_request(dev)) != LAPB_OK)
 			printk(KERN_ERR "lapbeth: lapb_disconnect_request "
 			       "err: %d\n", err);
 		/* Fall thru */
 	default:
-		goto drop_ok;
+		goto drop;
 	}
 
 	skb_pull(skb, 1);
 
 	if ((err = lapb_data_request(dev, skb)) != LAPB_OK) {
 		printk(KERN_ERR "lapbeth: lapb_data_request error - %d\n", err);
-		err = -ENOMEM;
 		goto drop;
 	}
-	err = 0;
 out:
-	return err;
-drop_ok:
-	err = 0;
+	return NETDEV_TX_OK;
 drop:
 	kfree_skb(skb);
 	goto out;
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 55f7de09d13..ea045151f95 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -538,6 +538,7 @@ ath5k_pci_probe(struct pci_dev *pdev,
 	sc->iobase = mem; /* So we can unmap it on detach */
 	sc->cachelsz = csz * sizeof(u32); /* convert to bytes */
 	sc->opmode = NL80211_IFTYPE_STATION;
+	sc->bintval = 1000;
 	mutex_init(&sc->lock);
 	spin_lock_init(&sc->rxbuflock);
 	spin_lock_init(&sc->txbuflock);
@@ -686,6 +687,13 @@ ath5k_pci_resume(struct pci_dev *pdev)
 	if (err)
 		return err;
 
+	/*
+	 * Suspend/Resume resets the PCI configuration space, so we have to
+	 * re-disable the RETRY_TIMEOUT register (0x41) to keep
+	 * PCI Tx retries from interfering with C3 CPU state
+	 */
+	pci_write_config_byte(pdev, 0x41, 0);
+
 	err = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
 	if (err) {
 		ATH5K_ERR(sc, "request_irq failed\n");
@@ -2748,9 +2756,6 @@ static int ath5k_add_interface(struct ieee80211_hw *hw,
 		goto end;
 	}
 
-	/* Set to a reasonable value. Note that this will
-	 * be set to mac80211's value at ath5k_config(). */
-	sc->bintval = 1000;
 	ath5k_hw_set_lladdr(sc->ah, conf->mac_addr);
 
 	ret = 0;
diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c
index ec35503f6a4..2942f13c9c4 100644
--- a/drivers/net/wireless/ath/ath5k/pcu.c
+++ b/drivers/net/wireless/ath/ath5k/pcu.c
@@ -733,8 +733,9 @@ void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval)
 	/*
 	 * Set the beacon register and enable all timers.
 	 */
-	/* When in AP mode zero timer0 to start TSF */
-	if (ah->ah_op_mode == NL80211_IFTYPE_AP)
+	/* When in AP or Mesh Point mode zero timer0 to start TSF */
+	if (ah->ah_op_mode == NL80211_IFTYPE_AP ||
+	    ah->ah_op_mode == NL80211_IFTYPE_MESH_POINT)
 		ath5k_hw_reg_write(ah, 0, AR5K_TIMER0);
 
 	ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0);
diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index 0ed1ac312aa..2d79610bce1 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -1,7 +1,6 @@
 config ATH9K
 	tristate "Atheros 802.11n wireless cards support"
 	depends on PCI && MAC80211 && WLAN_80211
-	depends on RFKILL || RFKILL=n
 	select ATH_COMMON
 	select MAC80211_LEDS
 	select LEDS_CLASS
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 515880aa211..5efc9345ca0 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -21,7 +21,6 @@
 #include <linux/device.h>
 #include <net/mac80211.h>
 #include <linux/leds.h>
-#include <linux/rfkill.h>
 
 #include "hw.h"
 #include "rc.h"
@@ -460,12 +459,6 @@ struct ath_led {
 	bool registered;
 };
 
-struct ath_rfkill {
-	struct rfkill *rfkill;
-	struct rfkill_ops ops;
-	char rfkill_name[32];
-};
-
 /********************/
 /* Main driver core */
 /********************/
@@ -505,7 +498,6 @@ struct ath_rfkill {
 #define SC_OP_PROTECT_ENABLE    BIT(6)
 #define SC_OP_RXFLUSH           BIT(7)
 #define SC_OP_LED_ASSOCIATED    BIT(8)
-#define SC_OP_RFKILL_REGISTERED BIT(9)
 #define SC_OP_WAIT_FOR_BEACON   BIT(12)
 #define SC_OP_LED_ON            BIT(13)
 #define SC_OP_SCANNING          BIT(14)
@@ -591,7 +583,6 @@ struct ath_softc {
 
 	int beacon_interval;
 
-	struct ath_rfkill rf_kill;
 	struct ath_ani ani;
 	struct ath9k_node_stats nodestats;
 #ifdef CONFIG_ATH9K_DEBUG
@@ -677,6 +668,7 @@ static inline void ath9k_ps_restore(struct ath_softc *sc)
 	if (atomic_dec_and_test(&sc->ps_usecount))
 		if ((sc->hw->conf.flags & IEEE80211_CONF_PS) &&
 		    !(sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
+				      SC_OP_WAIT_FOR_CAB |
 				      SC_OP_WAIT_FOR_PSPOLL_DATA |
 				      SC_OP_WAIT_FOR_TX_ACK)))
 			ath9k_hw_setpower(sc->sc_ah,
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 1579c9407ed..34935a8ee59 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -2186,6 +2186,18 @@ static void ath9k_hw_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan
 	REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask);
 }
 
+static void ath9k_enable_rfkill(struct ath_hw *ah)
+{
+	REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
+		    AR_GPIO_INPUT_EN_VAL_RFSILENT_BB);
+
+	REG_CLR_BIT(ah, AR_GPIO_INPUT_MUX2,
+		    AR_GPIO_INPUT_MUX2_RFSILENT);
+
+	ath9k_hw_cfg_gpio_input(ah, ah->rfkill_gpio);
+	REG_SET_BIT(ah, AR_PHY_TEST, RFSILENT_BB);
+}
+
 int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 		    bool bChannelChange)
 {
@@ -2313,10 +2325,9 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	ath9k_hw_init_interrupt_masks(ah, ah->opmode);
 	ath9k_hw_init_qos(ah);
 
-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
 	if (ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
 		ath9k_enable_rfkill(ah);
-#endif
+
 	ath9k_hw_init_user_settings(ah);
 
 	REG_WRITE(ah, AR_STA_ID1,
@@ -3613,20 +3624,6 @@ void ath9k_hw_set_gpio(struct ath_hw *ah, u32 gpio, u32 val)
 		AR_GPIO_BIT(gpio));
 }
 
-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
-void ath9k_enable_rfkill(struct ath_hw *ah)
-{
-	REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
-		    AR_GPIO_INPUT_EN_VAL_RFSILENT_BB);
-
-	REG_CLR_BIT(ah, AR_GPIO_INPUT_MUX2,
-		    AR_GPIO_INPUT_MUX2_RFSILENT);
-
-	ath9k_hw_cfg_gpio_input(ah, ah->rfkill_gpio);
-	REG_SET_BIT(ah, AR_PHY_TEST, RFSILENT_BB);
-}
-#endif
-
 u32 ath9k_hw_getdefantenna(struct ath_hw *ah)
 {
 	return REG_READ(ah, AR_DEF_ANTENNA) & 0x7;
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index dd8508ef6e0..9d0b31ad460 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -565,9 +565,6 @@ u32 ath9k_hw_gpio_get(struct ath_hw *ah, u32 gpio);
 void ath9k_hw_cfg_output(struct ath_hw *ah, u32 gpio,
 			 u32 ah_signal_type);
 void ath9k_hw_set_gpio(struct ath_hw *ah, u32 gpio, u32 val);
-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
-void ath9k_enable_rfkill(struct ath_hw *ah);
-#endif
 u32 ath9k_hw_getdefantenna(struct ath_hw *ah);
 void ath9k_hw_setantenna(struct ath_hw *ah, u32 antenna);
 bool ath9k_hw_setantennaswitch(struct ath_hw *ah,
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index f7baa406918..66a6c1f5022 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -231,6 +231,19 @@ static void ath_setup_rates(struct ath_softc *sc, enum ieee80211_band band)
 	}
 }
 
+static struct ath9k_channel *ath_get_curchannel(struct ath_softc *sc,
+						struct ieee80211_hw *hw)
+{
+	struct ieee80211_channel *curchan = hw->conf.channel;
+	struct ath9k_channel *channel;
+	u8 chan_idx;
+
+	chan_idx = curchan->hw_value;
+	channel = &sc->sc_ah->channels[chan_idx];
+	ath9k_update_ichannel(sc, hw, channel);
+	return channel;
+}
+
 /*
  * Set/change channels.  If the channel is really being changed, it's done
  * by reseting the chip.  To accomplish this we must first cleanup any pending
@@ -283,7 +296,7 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
 			"reset status %d\n",
 			channel->center_freq, r);
 		spin_unlock_bh(&sc->sc_resetlock);
-		return r;
+		goto ps_restore;
 	}
 	spin_unlock_bh(&sc->sc_resetlock);
 
@@ -292,14 +305,17 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
 	if (ath_startrecv(sc) != 0) {
 		DPRINTF(sc, ATH_DBG_FATAL,
 			"Unable to restart recv logic\n");
-		return -EIO;
+		r = -EIO;
+		goto ps_restore;
 	}
 
 	ath_cache_conf_rate(sc, &hw->conf);
 	ath_update_txpow(sc);
 	ath9k_hw_set_interrupts(ah, sc->imask);
+
+ ps_restore:
 	ath9k_ps_restore(sc);
-	return 0;
+	return r;
 }
 
 /*
@@ -1110,6 +1126,9 @@ void ath_radio_enable(struct ath_softc *sc)
 	ath9k_ps_wakeup(sc);
 	ath9k_hw_configpcipowersave(ah, 0);
 
+	if (!ah->curchan)
+		ah->curchan = ath_get_curchannel(sc, sc->hw);
+
 	spin_lock_bh(&sc->sc_resetlock);
 	r = ath9k_hw_reset(ah, ah->curchan, false);
 	if (r) {
@@ -1162,6 +1181,9 @@ void ath_radio_disable(struct ath_softc *sc)
 	ath_stoprecv(sc);		/* turn off frame recv */
 	ath_flushrecv(sc);		/* flush recv queue */
 
+	if (!ah->curchan)
+		ah->curchan = ath_get_curchannel(sc, sc->hw);
+
 	spin_lock_bh(&sc->sc_resetlock);
 	r = ath9k_hw_reset(ah, ah->curchan, false);
 	if (r) {
@@ -1174,12 +1196,10 @@ void ath_radio_disable(struct ath_softc *sc)
 
 	ath9k_hw_phy_disable(ah);
 	ath9k_hw_configpcipowersave(ah, 1);
-	ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
 	ath9k_ps_restore(sc);
+	ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
 }
 
-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
-
 /*******************/
 /*	Rfkill	   */
 /*******************/
@@ -1192,81 +1212,27 @@ static bool ath_is_rfkill_set(struct ath_softc *sc)
 				  ah->rfkill_polarity;
 }
 
-/* s/w rfkill handlers */
-static int ath_rfkill_set_block(void *data, bool blocked)
+static void ath9k_rfkill_poll_state(struct ieee80211_hw *hw)
 {
-	struct ath_softc *sc = data;
-
-	if (blocked)
-		ath_radio_disable(sc);
-	else
-		ath_radio_enable(sc);
-
-	return 0;
-}
-
-static void ath_rfkill_poll_state(struct rfkill *rfkill, void *data)
-{
-	struct ath_softc *sc = data;
+	struct ath_wiphy *aphy = hw->priv;
+	struct ath_softc *sc = aphy->sc;
 	bool blocked = !!ath_is_rfkill_set(sc);
 
-	if (rfkill_set_hw_state(rfkill, blocked))
+	wiphy_rfkill_set_hw_state(hw->wiphy, blocked);
+
+	if (blocked)
 		ath_radio_disable(sc);
 	else
 		ath_radio_enable(sc);
 }
 
-/* Init s/w rfkill */
-static int ath_init_sw_rfkill(struct ath_softc *sc)
-{
-	sc->rf_kill.ops.set_block = ath_rfkill_set_block;
-	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
-		sc->rf_kill.ops.poll = ath_rfkill_poll_state;
-
-	snprintf(sc->rf_kill.rfkill_name, sizeof(sc->rf_kill.rfkill_name),
-		"ath9k-%s::rfkill", wiphy_name(sc->hw->wiphy));
-
-	sc->rf_kill.rfkill = rfkill_alloc(sc->rf_kill.rfkill_name,
-					  wiphy_dev(sc->hw->wiphy),
-					  RFKILL_TYPE_WLAN,
-					  &sc->rf_kill.ops, sc);
-	if (!sc->rf_kill.rfkill) {
-		DPRINTF(sc, ATH_DBG_FATAL, "Failed to allocate rfkill\n");
-		return -ENOMEM;
-	}
-
-	return 0;
-}
-
-/* Deinitialize rfkill */
-static void ath_deinit_rfkill(struct ath_softc *sc)
-{
-	if (sc->sc_flags & SC_OP_RFKILL_REGISTERED) {
-		rfkill_unregister(sc->rf_kill.rfkill);
-		rfkill_destroy(sc->rf_kill.rfkill);
-		sc->sc_flags &= ~SC_OP_RFKILL_REGISTERED;
-	}
-}
-
-static int ath_start_rfkill_poll(struct ath_softc *sc)
+static void ath_start_rfkill_poll(struct ath_softc *sc)
 {
-	if (!(sc->sc_flags & SC_OP_RFKILL_REGISTERED)) {
-		if (rfkill_register(sc->rf_kill.rfkill)) {
-			DPRINTF(sc, ATH_DBG_FATAL,
-				"Unable to register rfkill\n");
-			rfkill_destroy(sc->rf_kill.rfkill);
-
-			/* Deinitialize the device */
-			ath_cleanup(sc);
-			return -EIO;
-		} else {
-			sc->sc_flags |= SC_OP_RFKILL_REGISTERED;
-		}
-	}
+	struct ath_hw *ah = sc->sc_ah;
 
-	return 0;
+	if (ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
+		wiphy_rfkill_start_polling(sc->hw->wiphy);
 }
-#endif /* CONFIG_RFKILL */
 
 void ath_cleanup(struct ath_softc *sc)
 {
@@ -1286,9 +1252,6 @@ void ath_detach(struct ath_softc *sc)
 
 	DPRINTF(sc, ATH_DBG_CONFIG, "Detach ATH hw\n");
 
-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
-	ath_deinit_rfkill(sc);
-#endif
 	ath_deinit_leds(sc);
 	cancel_work_sync(&sc->chan_work);
 	cancel_delayed_work_sync(&sc->wiphy_work);
@@ -1626,13 +1589,6 @@ int ath_attach(u16 devid, struct ath_softc *sc)
 	if (error != 0)
 		goto error_attach;
 
-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
-	/* Initialize s/w rfkill */
-	error = ath_init_sw_rfkill(sc);
-	if (error)
-		goto error_attach;
-#endif
-
 	INIT_WORK(&sc->chan_work, ath9k_wiphy_chan_work);
 	INIT_DELAYED_WORK(&sc->wiphy_work, ath9k_wiphy_work);
 	sc->wiphy_scheduler_int = msecs_to_jiffies(500);
@@ -1648,6 +1604,7 @@ int ath_attach(u16 devid, struct ath_softc *sc)
 	/* Initialize LED control */
 	ath_init_leds(sc);
 
+	ath_start_rfkill_poll(sc);
 
 	return 0;
 
@@ -1920,7 +1877,7 @@ static int ath9k_start(struct ieee80211_hw *hw)
 	struct ath_softc *sc = aphy->sc;
 	struct ieee80211_channel *curchan = hw->conf.channel;
 	struct ath9k_channel *init_channel;
-	int r, pos;
+	int r;
 
 	DPRINTF(sc, ATH_DBG_CONFIG, "Starting driver with "
 		"initial channel: %d MHz\n", curchan->center_freq);
@@ -1950,11 +1907,9 @@ static int ath9k_start(struct ieee80211_hw *hw)
 
 	/* setup initial channel */
 
-	pos = curchan->hw_value;
+	sc->chan_idx = curchan->hw_value;
 
-	sc->chan_idx = pos;
-	init_channel = &sc->sc_ah->channels[pos];
-	ath9k_update_ichannel(sc, hw, init_channel);
+	init_channel = ath_get_curchannel(sc, hw);
 
 	/* Reset SERDES registers */
 	ath9k_hw_configpcipowersave(sc->sc_ah, 0);
@@ -2018,10 +1973,6 @@ static int ath9k_start(struct ieee80211_hw *hw)
 
 	ieee80211_wake_queues(hw);
 
-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
-	r = ath_start_rfkill_poll(sc);
-#endif
-
 mutex_unlock:
 	mutex_unlock(&sc->mutex);
 
@@ -2159,7 +2110,7 @@ static void ath9k_stop(struct ieee80211_hw *hw)
 	} else
 		sc->rx.rxlink = NULL;
 
-	rfkill_pause_polling(sc->rf_kill.rfkill);
+	wiphy_rfkill_stop_polling(sc->hw->wiphy);
 
 	/* disable HAL and put h/w to sleep */
 	ath9k_hw_disable(sc->sc_ah);
@@ -2765,6 +2716,7 @@ struct ieee80211_ops ath9k_ops = {
 	.ampdu_action       = ath9k_ampdu_action,
 	.sw_scan_start      = ath9k_sw_scan_start,
 	.sw_scan_complete   = ath9k_sw_scan_complete,
+	.rfkill_poll        = ath9k_rfkill_poll_state,
 };
 
 static struct {
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index ccdf20a2e9b..170c5b32e49 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -87,6 +87,7 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	struct ath_softc *sc;
 	struct ieee80211_hw *hw;
 	u8 csz;
+	u32 val;
 	int ret = 0;
 	struct ath_hw *ah;
 
@@ -133,6 +134,14 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	pci_set_master(pdev);
 
+	/*
+	 * Disable the RETRY_TIMEOUT register (0x41) to keep
+	 * PCI Tx retries from interfering with C3 CPU state.
+	 */
+	pci_read_config_dword(pdev, 0x40, &val);
+	if ((val & 0x0000ff00) != 0)
+		pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
+
 	ret = pci_request_region(pdev, 0, "ath9k");
 	if (ret) {
 		dev_err(&pdev->dev, "PCI memory region reserve error\n");
@@ -239,12 +248,21 @@ static int ath_pci_resume(struct pci_dev *pdev)
 	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	u32 val;
 	int err;
 
 	err = pci_enable_device(pdev);
 	if (err)
 		return err;
 	pci_restore_state(pdev);
+	/*
+	 * Suspend/Resume resets the PCI configuration space, so we have to
+	 * re-disable the RETRY_TIMEOUT register (0x41) to keep
+	 * PCI Tx retries from interfering with C3 CPU state
+	 */
+	pci_read_config_dword(pdev, 0x40, &val);
+	if ((val & 0x0000ff00) != 0)
+		pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
 
 	/* Enable LED */
 	ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN,
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 5014a19b0f7..cece1c4c6bd 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -539,11 +539,14 @@ static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb)
 	if (ath_beacon_dtim_pending_cab(skb)) {
 		/*
 		 * Remain awake waiting for buffered broadcast/multicast
-		 * frames.
+		 * frames. If the last broadcast/multicast frame is not
+		 * received properly, the next beacon frame will work as
+		 * a backup trigger for returning into NETWORK SLEEP state,
+		 * so we are waiting for it as well.
 		 */
 		DPRINTF(sc, ATH_DBG_PS, "Received DTIM beacon indicating "
 			"buffered broadcast/multicast frame(s)\n");
-		sc->sc_flags |= SC_OP_WAIT_FOR_CAB;
+		sc->sc_flags |= SC_OP_WAIT_FOR_CAB | SC_OP_WAIT_FOR_BEACON;
 		return;
 	}
 
@@ -817,6 +820,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush)
 		}
 
 		if (unlikely(sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
+					     SC_OP_WAIT_FOR_CAB |
 					     SC_OP_WAIT_FOR_PSPOLL_DATA)))
 			ath_rx_ps(sc, skb);
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index a5637c4aa85..6d1519e1f01 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2152,7 +2152,6 @@ static int iwl_mac_start(struct ieee80211_hw *hw)
 	/* we should be verifying the device is ready to be opened */
 	mutex_lock(&priv->mutex);
 
-	memset(&priv->staging_rxon, 0, sizeof(struct iwl_rxon_cmd));
 	/* fetch ucode file from disk, alloc and copy to bus-master buffers ...
 	 * ucode filename and max sizes are card-specific. */
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index f9d16ca5b3d..6ab07165ea2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -629,13 +629,9 @@ u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv,
 		if (!sta_ht_inf->ht_supported)
 			return 0;
 	}
-
-	if (iwl_ht_conf->ht_protection & IEEE80211_HT_OP_MODE_PROTECTION_20MHZ)
-		return 1;
-	else
-		return iwl_is_channel_extension(priv, priv->band,
-				le16_to_cpu(priv->staging_rxon.channel),
-				iwl_ht_conf->extension_chan_offset);
+	return iwl_is_channel_extension(priv, priv->band,
+			le16_to_cpu(priv->staging_rxon.channel),
+			iwl_ht_conf->extension_chan_offset);
 }
 EXPORT_SYMBOL(iwl_is_fat_tx_allowed);
 
@@ -826,9 +822,18 @@ void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info)
 			 RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
 	if (iwl_is_fat_tx_allowed(priv, NULL)) {
 		/* pure 40 fat */
-		if (rxon->flags & RXON_FLG_FAT_PROT_MSK)
+		if (ht_info->ht_protection == IEEE80211_HT_OP_MODE_PROTECTION_20MHZ) {
 			rxon->flags |= RXON_FLG_CHANNEL_MODE_PURE_40;
-		else {
+			/* Note: control channel is opposite of extension channel */
+			switch (ht_info->extension_chan_offset) {
+			case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+				rxon->flags &= ~RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
+				break;
+			case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+				rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
+				break;
+			}
+		} else {
 			/* Note: control channel is opposite of extension channel */
 			switch (ht_info->extension_chan_offset) {
 			case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
@@ -2390,39 +2395,46 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw,
 		priv->ibss_beacon = ieee80211_beacon_get(hw, vif);
 	}
 
-	if ((changes & BSS_CHANGED_BSSID) && !iwl_is_rfkill(priv)) {
-		/* If there is currently a HW scan going on in the background
-		 * then we need to cancel it else the RXON below will fail. */
+	if (changes & BSS_CHANGED_BEACON_INT) {
+		priv->beacon_int = bss_conf->beacon_int;
+		/* TODO: in AP mode, do something to make this take effect */
+	}
+
+	if (changes & BSS_CHANGED_BSSID) {
+		IWL_DEBUG_MAC80211(priv, "BSSID %pM\n", bss_conf->bssid);
+
+		/*
+		 * If there is currently a HW scan going on in the
+		 * background then we need to cancel it else the RXON
+		 * below/in post_associate will fail.
+		 */
 		if (iwl_scan_cancel_timeout(priv, 100)) {
-			IWL_WARN(priv, "Aborted scan still in progress "
-				    "after 100ms\n");
+			IWL_WARN(priv, "Aborted scan still in progress after 100ms\n");
 			IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n");
 			mutex_unlock(&priv->mutex);
 			return;
 		}
-		memcpy(priv->staging_rxon.bssid_addr,
-		       bss_conf->bssid, ETH_ALEN);
-
-		/* TODO: Audit driver for usage of these members and see
-		 * if mac80211 deprecates them (priv->bssid looks like it
-		 * shouldn't be there, but I haven't scanned the IBSS code
-		 * to verify) - jpk */
-		memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
-
-		if (priv->iw_mode == NL80211_IFTYPE_AP)
-			iwlcore_config_ap(priv);
-		else {
-			int rc = iwlcore_commit_rxon(priv);
-			if ((priv->iw_mode == NL80211_IFTYPE_STATION) && rc)
-				iwl_rxon_add_station(
-					priv, priv->active_rxon.bssid_addr, 1);
+
+		/* mac80211 only sets assoc when in STATION mode */
+		if (priv->iw_mode == NL80211_IFTYPE_ADHOC ||
+		    bss_conf->assoc) {
+			memcpy(priv->staging_rxon.bssid_addr,
+			       bss_conf->bssid, ETH_ALEN);
+
+			/* currently needed in a few places */
+			memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
+		} else {
+			priv->staging_rxon.filter_flags &=
+				~RXON_FILTER_ASSOC_MSK;
 		}
-	} else if (!iwl_is_rfkill(priv)) {
-		iwl_scan_cancel_timeout(priv, 100);
-		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-		iwlcore_commit_rxon(priv);
+
 	}
 
+	/*
+	 * This needs to be after setting the BSSID in case
+	 * mac80211 decides to do both changes at once because
+	 * it will invoke post_associate.
+	 */
 	if (priv->iw_mode == NL80211_IFTYPE_ADHOC &&
 	    changes & BSS_CHANGED_BEACON) {
 		struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
@@ -2431,8 +2443,6 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw,
 			iwl_mac_beacon_update(hw, beacon);
 	}
 
-	mutex_unlock(&priv->mutex);
-
 	if (changes & BSS_CHANGED_ERP_PREAMBLE) {
 		IWL_DEBUG_MAC80211(priv, "ERP_PREAMBLE %d\n",
 				   bss_conf->use_short_preamble);
@@ -2450,6 +2460,23 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw,
 			priv->staging_rxon.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
 	}
 
+	if (changes & BSS_CHANGED_BASIC_RATES) {
+		/* XXX use this information
+		 *
+		 * To do that, remove code from iwl_set_rate() and put something
+		 * like this here:
+		 *
+		if (A-band)
+			priv->staging_rxon.ofdm_basic_rates =
+				bss_conf->basic_rates;
+		else
+			priv->staging_rxon.ofdm_basic_rates =
+				bss_conf->basic_rates >> 4;
+			priv->staging_rxon.cck_basic_rates =
+				bss_conf->basic_rates & 0xF;
+		 */
+	}
+
 	if (changes & BSS_CHANGED_HT) {
 		iwl_ht_conf(priv, bss_conf);
 
@@ -2459,10 +2486,6 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw,
 
 	if (changes & BSS_CHANGED_ASSOC) {
 		IWL_DEBUG_MAC80211(priv, "ASSOC %d\n", bss_conf->assoc);
-		/* This should never happen as this function should
-		 * never be called from interrupt context. */
-		if (WARN_ON_ONCE(in_interrupt()))
-			return;
 		if (bss_conf->assoc) {
 			priv->assoc_id = bss_conf->aid;
 			priv->beacon_int = bss_conf->beacon_int;
@@ -2470,27 +2493,35 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw,
 			priv->timestamp = bss_conf->timestamp;
 			priv->assoc_capability = bss_conf->assoc_capability;
 
-			/* we have just associated, don't start scan too early
-			 * leave time for EAPOL exchange to complete
+			/*
+			 * We have just associated, don't start scan too early
+			 * leave time for EAPOL exchange to complete.
+			 *
+			 * XXX: do this in mac80211
 			 */
 			priv->next_scan_jiffies = jiffies +
 					IWL_DELAY_NEXT_SCAN_AFTER_ASSOC;
-			mutex_lock(&priv->mutex);
-			priv->cfg->ops->lib->post_associate(priv);
-			mutex_unlock(&priv->mutex);
-		} else {
+			if (!iwl_is_rfkill(priv))
+				priv->cfg->ops->lib->post_associate(priv);
+		} else
 			priv->assoc_id = 0;
-			IWL_DEBUG_MAC80211(priv, "DISASSOC %d\n", bss_conf->assoc);
+
+	}
+
+	if (changes && iwl_is_associated(priv) && priv->assoc_id) {
+		IWL_DEBUG_MAC80211(priv, "Changes (%#x) while associated\n",
+				   changes);
+		ret = iwl_send_rxon_assoc(priv);
+		if (!ret) {
+			/* Sync active_rxon with latest change. */
+			memcpy((void *)&priv->active_rxon,
+				&priv->staging_rxon,
+				sizeof(struct iwl_rxon_cmd));
 		}
-	} else if (changes && iwl_is_associated(priv) && priv->assoc_id) {
-			IWL_DEBUG_MAC80211(priv, "Associated Changes %d\n", changes);
-			ret = iwl_send_rxon_assoc(priv);
-			if (!ret)
-				/* Sync active_rxon with latest change. */
-				memcpy((void *)&priv->active_rxon,
-					&priv->staging_rxon,
-					sizeof(struct iwl_rxon_cmd));
 	}
+
+	mutex_unlock(&priv->mutex);
+
 	IWL_DEBUG_MAC80211(priv, "leave\n");
 }
 EXPORT_SYMBOL(iwl_bss_info_changed);
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 83d31606dd0..cb9bd4c8f25 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -2498,8 +2498,7 @@ static void iwl3945_alive_start(struct iwl_priv *priv)
 		struct iwl3945_rxon_cmd *active_rxon =
 				(struct iwl3945_rxon_cmd *)(&priv->active_rxon);
 
-		memcpy(&priv->staging_rxon, &priv->active_rxon,
-		       sizeof(priv->staging_rxon));
+		priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
 		active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
 	} else {
 		/* Initialize our rx_config data */
@@ -3147,7 +3146,6 @@ static int iwl3945_mac_start(struct ieee80211_hw *hw)
 	/* we should be verifying the device is ready to be opened */
 	mutex_lock(&priv->mutex);
 
-	memset(&priv->staging_rxon, 0, sizeof(priv->staging_rxon));
 	/* fetch ucode file from disk, alloc and copy to bus-master buffers ...
 	 * ucode filename and max sizes are card-specific. */
 
diff --git a/drivers/net/wireless/iwmc3200wifi/iwm.h b/drivers/net/wireless/iwmc3200wifi/iwm.h
index 635c16ee618..77c339f8516 100644
--- a/drivers/net/wireless/iwmc3200wifi/iwm.h
+++ b/drivers/net/wireless/iwmc3200wifi/iwm.h
@@ -288,6 +288,7 @@ struct iwm_priv {
 	u8 *eeprom;
 	struct timer_list watchdog;
 	struct work_struct reset_worker;
+	struct mutex mutex;
 	struct rfkill *rfkill;
 
 	char private[0] __attribute__((__aligned__(NETDEV_ALIGN)));
@@ -315,8 +316,11 @@ extern const struct iw_handler_def iwm_iw_handler_def;
 void *iwm_if_alloc(int sizeof_bus, struct device *dev,
 		   struct iwm_if_ops *if_ops);
 void iwm_if_free(struct iwm_priv *iwm);
+int iwm_if_add(struct iwm_priv *iwm);
+void iwm_if_remove(struct iwm_priv *iwm);
 int iwm_mode_to_nl80211_iftype(int mode);
 int iwm_priv_init(struct iwm_priv *iwm);
+void iwm_priv_deinit(struct iwm_priv *iwm);
 void iwm_reset(struct iwm_priv *iwm);
 void iwm_tx_credit_init_pools(struct iwm_priv *iwm,
 			      struct iwm_umac_notif_alive *alive);
diff --git a/drivers/net/wireless/iwmc3200wifi/main.c b/drivers/net/wireless/iwmc3200wifi/main.c
index 6a2640f16b6..8be206d5822 100644
--- a/drivers/net/wireless/iwmc3200wifi/main.c
+++ b/drivers/net/wireless/iwmc3200wifi/main.c
@@ -112,6 +112,9 @@ static void iwm_statistics_request(struct work_struct *work)
 	iwm_send_umac_stats_req(iwm, 0);
 }
 
+int __iwm_up(struct iwm_priv *iwm);
+int __iwm_down(struct iwm_priv *iwm);
+
 static void iwm_reset_worker(struct work_struct *work)
 {
 	struct iwm_priv *iwm;
@@ -120,6 +123,19 @@ static void iwm_reset_worker(struct work_struct *work)
 
 	iwm = container_of(work, struct iwm_priv, reset_worker);
 
+	/*
+	 * XXX: The iwm->mutex is introduced purely for this reset work,
+	 * because the other users for iwm_up and iwm_down are only netdev
+	 * ndo_open and ndo_stop which are already protected by rtnl.
+	 * Please remove iwm->mutex together if iwm_reset_worker() is not
+	 * required in the future.
+	 */
+	if (!mutex_trylock(&iwm->mutex)) {
+		IWM_WARN(iwm, "We are in the middle of interface bringing "
+			 "UP/DOWN. Skip driver resetting.\n");
+		return;
+	}
+
 	if (iwm->umac_profile_active) {
 		profile = kmalloc(sizeof(struct iwm_umac_profile), GFP_KERNEL);
 		if (profile)
@@ -128,10 +144,10 @@ static void iwm_reset_worker(struct work_struct *work)
 			IWM_ERR(iwm, "Couldn't alloc memory for profile\n");
 	}
 
-	iwm_down(iwm);
+	__iwm_down(iwm);
 
 	while (retry++ < 3) {
-		ret = iwm_up(iwm);
+		ret = __iwm_up(iwm);
 		if (!ret)
 			break;
 
@@ -142,7 +158,7 @@ static void iwm_reset_worker(struct work_struct *work)
 		IWM_WARN(iwm, "iwm_up() failed: %d\n", ret);
 
 		kfree(profile);
-		return;
+		goto out;
 	}
 
 	if (profile) {
@@ -151,6 +167,9 @@ static void iwm_reset_worker(struct work_struct *work)
 		iwm_send_mlme_profile(iwm);
 		kfree(profile);
 	}
+
+ out:
+	mutex_unlock(&iwm->mutex);
 }
 
 static void iwm_watchdog(unsigned long data)
@@ -215,10 +234,21 @@ int iwm_priv_init(struct iwm_priv *iwm)
 	init_timer(&iwm->watchdog);
 	iwm->watchdog.function = iwm_watchdog;
 	iwm->watchdog.data = (unsigned long)iwm;
+	mutex_init(&iwm->mutex);
 
 	return 0;
 }
 
+void iwm_priv_deinit(struct iwm_priv *iwm)
+{
+	int i;
+
+	for (i = 0; i < IWM_TX_QUEUES; i++)
+		destroy_workqueue(iwm->txq[i].wq);
+
+	destroy_workqueue(iwm->rx_wq);
+}
+
 /*
  * We reset all the structures, and we reset the UMAC.
  * After calling this routine, you're expected to reload
@@ -466,7 +496,7 @@ void iwm_link_off(struct iwm_priv *iwm)
 
 	iwm_rx_free(iwm);
 
-	cancel_delayed_work(&iwm->stats_request);
+	cancel_delayed_work_sync(&iwm->stats_request);
 	memset(wstats, 0, sizeof(struct iw_statistics));
 	wstats->qual.updated = IW_QUAL_ALL_INVALID;
 
@@ -511,7 +541,7 @@ static int iwm_channels_init(struct iwm_priv *iwm)
 	return 0;
 }
 
-int iwm_up(struct iwm_priv *iwm)
+int __iwm_up(struct iwm_priv *iwm)
 {
 	int ret;
 	struct iwm_notif *notif_reboot, *notif_ack = NULL;
@@ -647,7 +677,18 @@ int iwm_up(struct iwm_priv *iwm)
 	return -EIO;
 }
 
-int iwm_down(struct iwm_priv *iwm)
+int iwm_up(struct iwm_priv *iwm)
+{
+	int ret;
+
+	mutex_lock(&iwm->mutex);
+	ret = __iwm_up(iwm);
+	mutex_unlock(&iwm->mutex);
+
+	return ret;
+}
+
+int __iwm_down(struct iwm_priv *iwm)
 {
 	int ret;
 
@@ -678,3 +719,14 @@ int iwm_down(struct iwm_priv *iwm)
 
 	return 0;
 }
+
+int iwm_down(struct iwm_priv *iwm)
+{
+	int ret;
+
+	mutex_lock(&iwm->mutex);
+	ret = __iwm_down(iwm);
+	mutex_unlock(&iwm->mutex);
+
+	return ret;
+}
diff --git a/drivers/net/wireless/iwmc3200wifi/netdev.c b/drivers/net/wireless/iwmc3200wifi/netdev.c
index 68e2c3b6c7a..aaa20c6885c 100644
--- a/drivers/net/wireless/iwmc3200wifi/netdev.c
+++ b/drivers/net/wireless/iwmc3200wifi/netdev.c
@@ -114,32 +114,31 @@ void *iwm_if_alloc(int sizeof_bus, struct device *dev,
 	iwm = wdev_to_iwm(wdev);
 	iwm->bus_ops = if_ops;
 	iwm->wdev = wdev;
-	iwm_priv_init(iwm);
+
+	ret = iwm_priv_init(iwm);
+	if (ret) {
+		dev_err(dev, "failed to init iwm_priv\n");
+		goto out_wdev;
+	}
+
 	wdev->iftype = iwm_mode_to_nl80211_iftype(iwm->conf.mode);
 
-	ndev = alloc_netdev_mq(0, "wlan%d", ether_setup,
-			       IWM_TX_QUEUES);
+	ndev = alloc_netdev_mq(0, "wlan%d", ether_setup, IWM_TX_QUEUES);
 	if (!ndev) {
 		dev_err(dev, "no memory for network device instance\n");
-		goto out_wdev;
+		goto out_priv;
 	}
 
 	ndev->netdev_ops = &iwm_netdev_ops;
 	ndev->wireless_handlers = &iwm_iw_handler_def;
 	ndev->ieee80211_ptr = wdev;
 	SET_NETDEV_DEV(ndev, wiphy_dev(wdev->wiphy));
-	ret = register_netdev(ndev);
-	if (ret < 0) {
-		dev_err(dev, "Failed to register netdev: %d\n", ret);
-		goto out_ndev;
-	}
-
 	wdev->netdev = ndev;
 
 	return iwm;
 
- out_ndev:
-	free_netdev(ndev);
+ out_priv:
+	iwm_priv_deinit(iwm);
 
  out_wdev:
 	iwm_wdev_free(iwm);
@@ -148,15 +147,29 @@ void *iwm_if_alloc(int sizeof_bus, struct device *dev,
 
 void iwm_if_free(struct iwm_priv *iwm)
 {
-	int i;
-
 	if (!iwm_to_ndev(iwm))
 		return;
 
-	unregister_netdev(iwm_to_ndev(iwm));
 	free_netdev(iwm_to_ndev(iwm));
 	iwm_wdev_free(iwm);
-	destroy_workqueue(iwm->rx_wq);
-	for (i = 0; i < IWM_TX_QUEUES; i++)
-		destroy_workqueue(iwm->txq[i].wq);
+	iwm_priv_deinit(iwm);
+}
+
+int iwm_if_add(struct iwm_priv *iwm)
+{
+	struct net_device *ndev = iwm_to_ndev(iwm);
+	int ret;
+
+	ret = register_netdev(ndev);
+	if (ret < 0) {
+		dev_err(&ndev->dev, "Failed to register netdev: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+void iwm_if_remove(struct iwm_priv *iwm)
+{
+	unregister_netdev(iwm_to_ndev(iwm));
 }
diff --git a/drivers/net/wireless/iwmc3200wifi/sdio.c b/drivers/net/wireless/iwmc3200wifi/sdio.c
index b54da677b37..916681837fd 100644
--- a/drivers/net/wireless/iwmc3200wifi/sdio.c
+++ b/drivers/net/wireless/iwmc3200wifi/sdio.c
@@ -454,10 +454,18 @@ static int iwm_sdio_probe(struct sdio_func *func,
 
 	INIT_WORK(&hw->isr_worker, iwm_sdio_isr_worker);
 
+	ret = iwm_if_add(iwm);
+	if (ret) {
+		dev_err(dev, "add SDIO interface failed\n");
+		goto destroy_wq;
+	}
+
 	dev_info(dev, "IWM SDIO probe\n");
 
 	return 0;
 
+ destroy_wq:
+	destroy_workqueue(hw->isr_wq);
  debugfs_exit:
 	iwm_debugfs_exit(iwm);
  if_free:
@@ -471,9 +479,10 @@ static void iwm_sdio_remove(struct sdio_func *func)
 	struct iwm_priv *iwm = hw_to_iwm(hw);
 	struct device *dev = &func->dev;
 
+	iwm_if_remove(iwm);
+	destroy_workqueue(hw->isr_wq);
 	iwm_debugfs_exit(iwm);
 	iwm_if_free(iwm);
-	destroy_workqueue(hw->isr_wq);
 
 	sdio_set_drvdata(func, NULL);
 
diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c
index 06a46d7b3d6..6564282ce47 100644
--- a/drivers/net/wireless/libertas/if_spi.c
+++ b/drivers/net/wireless/libertas/if_spi.c
@@ -812,7 +812,6 @@ out:
 static void if_spi_e2h(struct if_spi_card *card)
 {
 	int err = 0;
-	unsigned long flags;
 	u32 cause;
 	struct lbs_private *priv = card->priv;
 
@@ -827,10 +826,7 @@ static void if_spi_e2h(struct if_spi_card *card)
 	/* generate a card interrupt */
 	spu_write_u16(card, IF_SPI_CARD_INT_CAUSE_REG, IF_SPI_CIC_HOST_EVENT);
 
-	spin_lock_irqsave(&priv->driver_lock, flags);
 	lbs_queue_event(priv, cause & 0xff);
-	spin_unlock_irqrestore(&priv->driver_lock, flags);
-
 out:
 	if (err)
 		lbs_pr_err("%s: error %d\n", __func__, err);
@@ -875,7 +871,12 @@ static int lbs_spi_thread(void *data)
 			err = if_spi_c2h_data(card);
 			if (err)
 				goto err;
-		if (hiStatus & IF_SPI_HIST_CMD_DOWNLOAD_RDY) {
+
+		/* workaround: in PS mode, the card does not set the Command
+		 * Download Ready bit, but it sets TX Download Ready. */
+		if (hiStatus & IF_SPI_HIST_CMD_DOWNLOAD_RDY ||
+		   (card->priv->psstate != PS_STATE_FULL_POWER &&
+		    (hiStatus & IF_SPI_HIST_TX_DOWNLOAD_RDY))) {
 			/* This means two things. First of all,
 			 * if there was a previous command sent, the card has
 			 * successfully received it.
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index f0e5e943f6e..14a19baff21 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -67,6 +67,7 @@ static struct usb_device_id usb_ids[] = {
 	{ USB_DEVICE(0x079b, 0x0062), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x1582, 0x6003), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x050d, 0x705c), .driver_info = DEVICE_ZD1211B },
+	{ USB_DEVICE(0x083a, 0xe503), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x083a, 0xe506), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x083a, 0x4505), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x0471, 0x1236), .driver_info = DEVICE_ZD1211B },
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 151bf5bc8af..1032d5fdbd4 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -1471,11 +1471,13 @@ static void __devinit decode_smsc(int efer, int key, int devid, int devrev)
 
 static void __devinit winbond_check(int io, int key)
 {
-	int devid, devrev, oldid, x_devid, x_devrev, x_oldid;
+	int origval, devid, devrev, oldid, x_devid, x_devrev, x_oldid;
 
 	if (!request_region(io, 3, __func__))
 		return;
 
+	origval = inb(io); /* Save original value */
+
 	/* First probe without key */
 	outb(0x20, io);
 	x_devid = inb(io + 1);
@@ -1495,6 +1497,8 @@ static void __devinit winbond_check(int io, int key)
 	oldid = inb(io + 1);
 	outb(0xaa, io);    /* Magic Seal */
 
+	outb(origval, io); /* in case we poked some entirely different hardware */
+
 	if ((x_devid == devid) && (x_devrev == devrev) && (x_oldid == oldid))
 		goto out; /* protection against false positives */
 
@@ -1505,11 +1509,15 @@ out:
 
 static void __devinit winbond_check2(int io, int key)
 {
-	int devid, devrev, oldid, x_devid, x_devrev, x_oldid;
+	int origval[3], devid, devrev, oldid, x_devid, x_devrev, x_oldid;
 
 	if (!request_region(io, 3, __func__))
 		return;
 
+	origval[0] = inb(io); /* Save original values */
+	origval[1] = inb(io + 1);
+	origval[2] = inb(io + 2);
+
 	/* First probe without the key */
 	outb(0x20, io + 2);
 	x_devid = inb(io + 2);
@@ -1528,6 +1536,10 @@ static void __devinit winbond_check2(int io, int key)
 	oldid = inb(io + 2);
 	outb(0xaa, io);    /* Magic Seal */
 
+	outb(origval[0], io); /* in case we poked some entirely different hardware */
+	outb(origval[1], io + 1);
+	outb(origval[2], io + 2);
+
 	if (x_devid == devid && x_devrev == devrev && x_oldid == oldid)
 		goto out; /* protection against false positives */
 
@@ -1538,11 +1550,13 @@ out:
 
 static void __devinit smsc_check(int io, int key)
 {
-	int id, rev, oldid, oldrev, x_id, x_rev, x_oldid, x_oldrev;
+	int origval, id, rev, oldid, oldrev, x_id, x_rev, x_oldid, x_oldrev;
 
 	if (!request_region(io, 3, __func__))
 		return;
 
+	origval = inb(io); /* Save original value */
+
 	/* First probe without the key */
 	outb(0x0d, io);
 	x_oldid = inb(io + 1);
@@ -1566,6 +1580,8 @@ static void __devinit smsc_check(int io, int key)
 	rev = inb(io + 1);
 	outb(0xaa, io);    /* Magic Seal */
 
+	outb(origval, io); /* in case we poked some entirely different hardware */
+
 	if (x_id == id && x_oldrev == oldrev &&
 	    x_oldid == oldid && x_rev == rev)
 		goto out; /* protection against false positives */
@@ -1602,11 +1618,12 @@ static void __devinit detect_and_report_smsc(void)
 static void __devinit detect_and_report_it87(void)
 {
 	u16 dev;
-	u8 r;
+	u8 origval, r;
 	if (verbose_probing)
 		printk(KERN_DEBUG "IT8705 Super-IO detection, now testing port 2E ...\n");
-	if (!request_region(0x2e, 1, __func__))
+	if (!request_region(0x2e, 2, __func__))
 		return;
+	origval = inb(0x2e);		/* Save original value */
 	outb(0x87, 0x2e);
 	outb(0x01, 0x2e);
 	outb(0x55, 0x2e);
@@ -1626,8 +1643,10 @@ static void __devinit detect_and_report_it87(void)
 		outb(r | 8, 0x2F);
 		outb(0x02, 0x2E);	/* Lock */
 		outb(0x02, 0x2F);
+	} else {
+		outb(origval, 0x2e);	/* Oops, sorry to disturb */
 	}
-	release_region(0x2e, 1);
+	release_region(0x2e, 2);
 }
 #endif /* CONFIG_PARPORT_PC_SUPERIO */
 
@@ -2271,6 +2290,9 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 		if (IS_ERR(pdev))
 			return NULL;
 		dev = &pdev->dev;
+
+		dev->coherent_dma_mask = DMA_BIT_MASK(24);
+		dev->dma_mask = &dev->coherent_dma_mask;
 	}
 
 	ops = kmalloc(sizeof(struct parport_operations), GFP_KERNEL);
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index b77ae679427..1ebd6b4c743 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -2,10 +2,11 @@
 # Makefile for the PCI bus specific drivers.
 #
 
-obj-y		+= access.o bus.o probe.o remove.o pci.o quirks.o slot.o \
+obj-y		+= access.o bus.o probe.o remove.o pci.o quirks.o \
 			pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \
 			irq.o
 obj-$(CONFIG_PROC_FS) += proc.o
+obj-$(CONFIG_SYSFS) += slot.o
 
 # Build PCI Express stuff if needed
 obj-$(CONFIG_PCIEPORTBUS) += pcie/
diff --git a/drivers/pci/access.c b/drivers/pci/access.c
index 0f370651268..db23200c487 100644
--- a/drivers/pci/access.c
+++ b/drivers/pci/access.c
@@ -66,6 +66,25 @@ EXPORT_SYMBOL(pci_bus_write_config_byte);
 EXPORT_SYMBOL(pci_bus_write_config_word);
 EXPORT_SYMBOL(pci_bus_write_config_dword);
 
+/**
+ * pci_bus_set_ops - Set raw operations of pci bus
+ * @bus:	pci bus struct
+ * @ops:	new raw operations
+ *
+ * Return previous raw operations
+ */
+struct pci_ops *pci_bus_set_ops(struct pci_bus *bus, struct pci_ops *ops)
+{
+	struct pci_ops *old_ops;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pci_lock, flags);
+	old_ops = bus->ops;
+	bus->ops = ops;
+	spin_unlock_irqrestore(&pci_lock, flags);
+	return old_ops;
+}
+EXPORT_SYMBOL(pci_bus_set_ops);
 
 /**
  * pci_read_vpd - Read one entry from Vital Product Data
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 97a8194063b..cef28a79103 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -41,9 +41,14 @@ pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
 		void *alignf_data)
 {
 	int i, ret = -ENOMEM;
+	resource_size_t max = -1;
 
 	type_mask |= IORESOURCE_IO | IORESOURCE_MEM;
 
+	/* don't allocate too high if the pref mem doesn't support 64bit*/
+	if (!(res->flags & IORESOURCE_MEM_64))
+		max = PCIBIOS_MAX_MEM_32;
+
 	for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
 		struct resource *r = bus->resource[i];
 		if (!r)
@@ -62,7 +67,7 @@ pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
 		/* Ok, try it out.. */
 		ret = allocate_resource(r, res, size,
 					r->start ? : min,
-					-1, align,
+					max, align,
 					alignf, alignf_data);
 		if (ret == 0)
 			break;
@@ -201,13 +206,18 @@ void pci_enable_bridges(struct pci_bus *bus)
  *  Walk the given bus, including any bridged devices
  *  on buses under this bus.  Call the provided callback
  *  on each device found.
+ *
+ *  We check the return of @cb each time. If it returns anything
+ *  other than 0, we break out.
+ *
  */
-void pci_walk_bus(struct pci_bus *top, void (*cb)(struct pci_dev *, void *),
+void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
 		  void *userdata)
 {
 	struct pci_dev *dev;
 	struct pci_bus *bus;
 	struct list_head *next;
+	int retval;
 
 	bus = top;
 	down_read(&pci_bus_sem);
@@ -231,8 +241,10 @@ void pci_walk_bus(struct pci_bus *top, void (*cb)(struct pci_dev *, void *),
 
 		/* Run device routines with the device locked */
 		down(&dev->dev.sem);
-		cb(dev, userdata);
+		retval = cb(dev, userdata);
 		up(&dev->dev.sem);
+		if (retval)
+			break;
 	}
 	up_read(&pci_bus_sem);
 }
diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c
index fa3a11365ec..7b287cb38b7 100644
--- a/drivers/pci/dmar.c
+++ b/drivers/pci/dmar.c
@@ -267,6 +267,84 @@ rmrr_parse_dev(struct dmar_rmrr_unit *rmrru)
 	}
 	return ret;
 }
+
+static LIST_HEAD(dmar_atsr_units);
+
+static int __init dmar_parse_one_atsr(struct acpi_dmar_header *hdr)
+{
+	struct acpi_dmar_atsr *atsr;
+	struct dmar_atsr_unit *atsru;
+
+	atsr = container_of(hdr, struct acpi_dmar_atsr, header);
+	atsru = kzalloc(sizeof(*atsru), GFP_KERNEL);
+	if (!atsru)
+		return -ENOMEM;
+
+	atsru->hdr = hdr;
+	atsru->include_all = atsr->flags & 0x1;
+
+	list_add(&atsru->list, &dmar_atsr_units);
+
+	return 0;
+}
+
+static int __init atsr_parse_dev(struct dmar_atsr_unit *atsru)
+{
+	int rc;
+	struct acpi_dmar_atsr *atsr;
+
+	if (atsru->include_all)
+		return 0;
+
+	atsr = container_of(atsru->hdr, struct acpi_dmar_atsr, header);
+	rc = dmar_parse_dev_scope((void *)(atsr + 1),
+				(void *)atsr + atsr->header.length,
+				&atsru->devices_cnt, &atsru->devices,
+				atsr->segment);
+	if (rc || !atsru->devices_cnt) {
+		list_del(&atsru->list);
+		kfree(atsru);
+	}
+
+	return rc;
+}
+
+int dmar_find_matched_atsr_unit(struct pci_dev *dev)
+{
+	int i;
+	struct pci_bus *bus;
+	struct acpi_dmar_atsr *atsr;
+	struct dmar_atsr_unit *atsru;
+
+	list_for_each_entry(atsru, &dmar_atsr_units, list) {
+		atsr = container_of(atsru->hdr, struct acpi_dmar_atsr, header);
+		if (atsr->segment == pci_domain_nr(dev->bus))
+			goto found;
+	}
+
+	return 0;
+
+found:
+	for (bus = dev->bus; bus; bus = bus->parent) {
+		struct pci_dev *bridge = bus->self;
+
+		if (!bridge || !bridge->is_pcie ||
+		    bridge->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE)
+			return 0;
+
+		if (bridge->pcie_type == PCI_EXP_TYPE_ROOT_PORT) {
+			for (i = 0; i < atsru->devices_cnt; i++)
+				if (atsru->devices[i] == bridge)
+					return 1;
+			break;
+		}
+	}
+
+	if (atsru->include_all)
+		return 1;
+
+	return 0;
+}
 #endif
 
 static void __init
@@ -274,22 +352,28 @@ dmar_table_print_dmar_entry(struct acpi_dmar_header *header)
 {
 	struct acpi_dmar_hardware_unit *drhd;
 	struct acpi_dmar_reserved_memory *rmrr;
+	struct acpi_dmar_atsr *atsr;
 
 	switch (header->type) {
 	case ACPI_DMAR_TYPE_HARDWARE_UNIT:
-		drhd = (struct acpi_dmar_hardware_unit *)header;
+		drhd = container_of(header, struct acpi_dmar_hardware_unit,
+				    header);
 		printk (KERN_INFO PREFIX
-			"DRHD (flags: 0x%08x)base: 0x%016Lx\n",
-			drhd->flags, (unsigned long long)drhd->address);
+			"DRHD base: %#016Lx flags: %#x\n",
+			(unsigned long long)drhd->address, drhd->flags);
 		break;
 	case ACPI_DMAR_TYPE_RESERVED_MEMORY:
-		rmrr = (struct acpi_dmar_reserved_memory *)header;
-
+		rmrr = container_of(header, struct acpi_dmar_reserved_memory,
+				    header);
 		printk (KERN_INFO PREFIX
-			"RMRR base: 0x%016Lx end: 0x%016Lx\n",
+			"RMRR base: %#016Lx end: %#016Lx\n",
 			(unsigned long long)rmrr->base_address,
 			(unsigned long long)rmrr->end_address);
 		break;
+	case ACPI_DMAR_TYPE_ATSR:
+		atsr = container_of(header, struct acpi_dmar_atsr, header);
+		printk(KERN_INFO PREFIX "ATSR flags: %#x\n", atsr->flags);
+		break;
 	}
 }
 
@@ -363,6 +447,11 @@ parse_dmar_table(void)
 			ret = dmar_parse_one_rmrr(entry_header);
 #endif
 			break;
+		case ACPI_DMAR_TYPE_ATSR:
+#ifdef CONFIG_DMAR
+			ret = dmar_parse_one_atsr(entry_header);
+#endif
+			break;
 		default:
 			printk(KERN_WARNING PREFIX
 				"Unknown DMAR structure type\n");
@@ -431,11 +520,19 @@ int __init dmar_dev_scope_init(void)
 #ifdef CONFIG_DMAR
 	{
 		struct dmar_rmrr_unit *rmrr, *rmrr_n;
+		struct dmar_atsr_unit *atsr, *atsr_n;
+
 		list_for_each_entry_safe(rmrr, rmrr_n, &dmar_rmrr_units, list) {
 			ret = rmrr_parse_dev(rmrr);
 			if (ret)
 				return ret;
 		}
+
+		list_for_each_entry_safe(atsr, atsr_n, &dmar_atsr_units, list) {
+			ret = atsr_parse_dev(atsr);
+			if (ret)
+				return ret;
+		}
 	}
 #endif
 
@@ -468,6 +565,9 @@ int __init dmar_table_init(void)
 #ifdef CONFIG_DMAR
 	if (list_empty(&dmar_rmrr_units))
 		printk(KERN_INFO PREFIX "No RMRR found\n");
+
+	if (list_empty(&dmar_atsr_units))
+		printk(KERN_INFO PREFIX "No ATSR found\n");
 #endif
 
 #ifdef CONFIG_INTR_REMAP
@@ -515,6 +615,7 @@ int alloc_iommu(struct dmar_drhd_unit *drhd)
 	u32 ver;
 	static int iommu_allocated = 0;
 	int agaw = 0;
+	int msagaw = 0;
 
 	iommu = kzalloc(sizeof(*iommu), GFP_KERNEL);
 	if (!iommu)
@@ -535,12 +636,20 @@ int alloc_iommu(struct dmar_drhd_unit *drhd)
 	agaw = iommu_calculate_agaw(iommu);
 	if (agaw < 0) {
 		printk(KERN_ERR
-			"Cannot get a valid agaw for iommu (seq_id = %d)\n",
+		       "Cannot get a valid agaw for iommu (seq_id = %d)\n",
+		       iommu->seq_id);
+		goto error;
+	}
+	msagaw = iommu_calculate_max_sagaw(iommu);
+	if (msagaw < 0) {
+		printk(KERN_ERR
+			"Cannot get a valid max agaw for iommu (seq_id = %d)\n",
 			iommu->seq_id);
 		goto error;
 	}
 #endif
 	iommu->agaw = agaw;
+	iommu->msagaw = msagaw;
 
 	/* the registers might be more than one page */
 	map_size = max_t(int, ecap_max_iotlb_offset(iommu->ecap),
@@ -590,7 +699,8 @@ void free_iommu(struct intel_iommu *iommu)
  */
 static inline void reclaim_free_desc(struct q_inval *qi)
 {
-	while (qi->desc_status[qi->free_tail] == QI_DONE) {
+	while (qi->desc_status[qi->free_tail] == QI_DONE ||
+	       qi->desc_status[qi->free_tail] == QI_ABORT) {
 		qi->desc_status[qi->free_tail] = QI_FREE;
 		qi->free_tail = (qi->free_tail + 1) % QI_LENGTH;
 		qi->free_cnt++;
@@ -600,10 +710,13 @@ static inline void reclaim_free_desc(struct q_inval *qi)
 static int qi_check_fault(struct intel_iommu *iommu, int index)
 {
 	u32 fault;
-	int head;
+	int head, tail;
 	struct q_inval *qi = iommu->qi;
 	int wait_index = (index + 1) % QI_LENGTH;
 
+	if (qi->desc_status[wait_index] == QI_ABORT)
+		return -EAGAIN;
+
 	fault = readl(iommu->reg + DMAR_FSTS_REG);
 
 	/*
@@ -613,7 +726,11 @@ static int qi_check_fault(struct intel_iommu *iommu, int index)
 	 */
 	if (fault & DMA_FSTS_IQE) {
 		head = readl(iommu->reg + DMAR_IQH_REG);
-		if ((head >> 4) == index) {
+		if ((head >> DMAR_IQ_SHIFT) == index) {
+			printk(KERN_ERR "VT-d detected invalid descriptor: "
+				"low=%llx, high=%llx\n",
+				(unsigned long long)qi->desc[index].low,
+				(unsigned long long)qi->desc[index].high);
 			memcpy(&qi->desc[index], &qi->desc[wait_index],
 					sizeof(struct qi_desc));
 			__iommu_flush_cache(iommu, &qi->desc[index],
@@ -623,6 +740,32 @@ static int qi_check_fault(struct intel_iommu *iommu, int index)
 		}
 	}
 
+	/*
+	 * If ITE happens, all pending wait_desc commands are aborted.
+	 * No new descriptors are fetched until the ITE is cleared.
+	 */
+	if (fault & DMA_FSTS_ITE) {
+		head = readl(iommu->reg + DMAR_IQH_REG);
+		head = ((head >> DMAR_IQ_SHIFT) - 1 + QI_LENGTH) % QI_LENGTH;
+		head |= 1;
+		tail = readl(iommu->reg + DMAR_IQT_REG);
+		tail = ((tail >> DMAR_IQ_SHIFT) - 1 + QI_LENGTH) % QI_LENGTH;
+
+		writel(DMA_FSTS_ITE, iommu->reg + DMAR_FSTS_REG);
+
+		do {
+			if (qi->desc_status[head] == QI_IN_USE)
+				qi->desc_status[head] = QI_ABORT;
+			head = (head - 2 + QI_LENGTH) % QI_LENGTH;
+		} while (head != tail);
+
+		if (qi->desc_status[wait_index] == QI_ABORT)
+			return -EAGAIN;
+	}
+
+	if (fault & DMA_FSTS_ICE)
+		writel(DMA_FSTS_ICE, iommu->reg + DMAR_FSTS_REG);
+
 	return 0;
 }
 
@@ -632,7 +775,7 @@ static int qi_check_fault(struct intel_iommu *iommu, int index)
  */
 int qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu)
 {
-	int rc = 0;
+	int rc;
 	struct q_inval *qi = iommu->qi;
 	struct qi_desc *hw, wait_desc;
 	int wait_index, index;
@@ -643,6 +786,9 @@ int qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu)
 
 	hw = qi->desc;
 
+restart:
+	rc = 0;
+
 	spin_lock_irqsave(&qi->q_lock, flags);
 	while (qi->free_cnt < 3) {
 		spin_unlock_irqrestore(&qi->q_lock, flags);
@@ -673,7 +819,7 @@ int qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu)
 	 * update the HW tail register indicating the presence of
 	 * new descriptors.
 	 */
-	writel(qi->free_head << 4, iommu->reg + DMAR_IQT_REG);
+	writel(qi->free_head << DMAR_IQ_SHIFT, iommu->reg + DMAR_IQT_REG);
 
 	while (qi->desc_status[wait_index] != QI_DONE) {
 		/*
@@ -685,18 +831,21 @@ int qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu)
 		 */
 		rc = qi_check_fault(iommu, index);
 		if (rc)
-			goto out;
+			break;
 
 		spin_unlock(&qi->q_lock);
 		cpu_relax();
 		spin_lock(&qi->q_lock);
 	}
-out:
-	qi->desc_status[index] = qi->desc_status[wait_index] = QI_DONE;
+
+	qi->desc_status[index] = QI_DONE;
 
 	reclaim_free_desc(qi);
 	spin_unlock_irqrestore(&qi->q_lock, flags);
 
+	if (rc == -EAGAIN)
+		goto restart;
+
 	return rc;
 }
 
@@ -714,41 +863,26 @@ void qi_global_iec(struct intel_iommu *iommu)
 	qi_submit_sync(&desc, iommu);
 }
 
-int qi_flush_context(struct intel_iommu *iommu, u16 did, u16 sid, u8 fm,
-		     u64 type, int non_present_entry_flush)
+void qi_flush_context(struct intel_iommu *iommu, u16 did, u16 sid, u8 fm,
+		      u64 type)
 {
 	struct qi_desc desc;
 
-	if (non_present_entry_flush) {
-		if (!cap_caching_mode(iommu->cap))
-			return 1;
-		else
-			did = 0;
-	}
-
 	desc.low = QI_CC_FM(fm) | QI_CC_SID(sid) | QI_CC_DID(did)
 			| QI_CC_GRAN(type) | QI_CC_TYPE;
 	desc.high = 0;
 
-	return qi_submit_sync(&desc, iommu);
+	qi_submit_sync(&desc, iommu);
 }
 
-int qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr,
-		   unsigned int size_order, u64 type,
-		   int non_present_entry_flush)
+void qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr,
+		    unsigned int size_order, u64 type)
 {
 	u8 dw = 0, dr = 0;
 
 	struct qi_desc desc;
 	int ih = 0;
 
-	if (non_present_entry_flush) {
-		if (!cap_caching_mode(iommu->cap))
-			return 1;
-		else
-			did = 0;
-	}
-
 	if (cap_write_drain(iommu->cap))
 		dw = 1;
 
@@ -760,7 +894,28 @@ int qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr,
 	desc.high = QI_IOTLB_ADDR(addr) | QI_IOTLB_IH(ih)
 		| QI_IOTLB_AM(size_order);
 
-	return qi_submit_sync(&desc, iommu);
+	qi_submit_sync(&desc, iommu);
+}
+
+void qi_flush_dev_iotlb(struct intel_iommu *iommu, u16 sid, u16 qdep,
+			u64 addr, unsigned mask)
+{
+	struct qi_desc desc;
+
+	if (mask) {
+		BUG_ON(addr & ((1 << (VTD_PAGE_SHIFT + mask)) - 1));
+		addr |= (1 << (VTD_PAGE_SHIFT + mask - 1)) - 1;
+		desc.high = QI_DEV_IOTLB_ADDR(addr) | QI_DEV_IOTLB_SIZE;
+	} else
+		desc.high = QI_DEV_IOTLB_ADDR(addr);
+
+	if (qdep >= QI_DEV_IOTLB_MAX_INVS)
+		qdep = 0;
+
+	desc.low = QI_DEV_IOTLB_SID(sid) | QI_DEV_IOTLB_QDEP(qdep) |
+		   QI_DIOTLB_TYPE;
+
+	qi_submit_sync(&desc, iommu);
 }
 
 /*
@@ -790,7 +945,6 @@ void dmar_disable_qi(struct intel_iommu *iommu)
 		cpu_relax();
 
 	iommu->gcmd &= ~DMA_GCMD_QIE;
-
 	writel(iommu->gcmd, iommu->reg + DMAR_GCMD_REG);
 
 	IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG, readl,
@@ -804,7 +958,7 @@ end:
  */
 static void __dmar_enable_qi(struct intel_iommu *iommu)
 {
-	u32 cmd, sts;
+	u32 sts;
 	unsigned long flags;
 	struct q_inval *qi = iommu->qi;
 
@@ -818,9 +972,8 @@ static void __dmar_enable_qi(struct intel_iommu *iommu)
 
 	dmar_writeq(iommu->reg + DMAR_IQA_REG, virt_to_phys(qi->desc));
 
-	cmd = iommu->gcmd | DMA_GCMD_QIE;
 	iommu->gcmd |= DMA_GCMD_QIE;
-	writel(cmd, iommu->reg + DMAR_GCMD_REG);
+	writel(iommu->gcmd, iommu->reg + DMAR_GCMD_REG);
 
 	/* Make sure hardware complete it */
 	IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG, readl, (sts & DMA_GSTS_QIES), sts);
@@ -1096,7 +1249,7 @@ int dmar_set_interrupt(struct intel_iommu *iommu)
 		set_irq_data(irq, NULL);
 		iommu->irq = 0;
 		destroy_irq(irq);
-		return 0;
+		return ret;
 	}
 
 	ret = request_irq(irq, dmar_fault, 0, iommu->name, iommu);
diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
index 9aa4fe100a0..66f29bc00be 100644
--- a/drivers/pci/hotplug/Kconfig
+++ b/drivers/pci/hotplug/Kconfig
@@ -4,7 +4,7 @@
 
 menuconfig HOTPLUG_PCI
 	tristate "Support for PCI Hotplug"
-	depends on PCI && HOTPLUG
+	depends on PCI && HOTPLUG && SYSFS
 	---help---
 	  Say Y here if you have a motherboard with a PCI Hotplug controller.
 	  This allows you to add and remove PCI cards while the machine is
@@ -41,7 +41,7 @@ config HOTPLUG_PCI_FAKE
 
 config HOTPLUG_PCI_COMPAQ
 	tristate "Compaq PCI Hotplug driver"
-	depends on X86 && PCI_BIOS && PCI_LEGACY
+	depends on X86 && PCI_BIOS
 	help
 	  Say Y here if you have a motherboard with a Compaq PCI Hotplug
 	  controller.
diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c
index 43c10bd261b..4dd7114964a 100644
--- a/drivers/pci/hotplug/acpiphp_core.c
+++ b/drivers/pci/hotplug/acpiphp_core.c
@@ -77,7 +77,6 @@ static int get_latch_status	(struct hotplug_slot *slot, u8 *value);
 static int get_adapter_status	(struct hotplug_slot *slot, u8 *value);
 
 static struct hotplug_slot_ops acpi_hotplug_slot_ops = {
-	.owner			= THIS_MODULE,
 	.enable_slot		= enable_slot,
 	.disable_slot		= disable_slot,
 	.set_attention_status	= set_attention_status,
diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c
index de94f4feef8..a5b9f6ae507 100644
--- a/drivers/pci/hotplug/cpci_hotplug_core.c
+++ b/drivers/pci/hotplug/cpci_hotplug_core.c
@@ -72,7 +72,6 @@ static int get_adapter_status(struct hotplug_slot *slot, u8 * value);
 static int get_latch_status(struct hotplug_slot *slot, u8 * value);
 
 static struct hotplug_slot_ops cpci_hotplug_slot_ops = {
-	.owner = THIS_MODULE,
 	.enable_slot = enable_slot,
 	.disable_slot = disable_slot,
 	.set_attention_status = set_attention_status,
diff --git a/drivers/pci/hotplug/cpqphp.h b/drivers/pci/hotplug/cpqphp.h
index afaf8f69f73..53836001d51 100644
--- a/drivers/pci/hotplug/cpqphp.h
+++ b/drivers/pci/hotplug/cpqphp.h
@@ -150,25 +150,25 @@ struct ctrl_reg {			/* offset */
 
 /* offsets to the controller registers based on the above structure layout */
 enum ctrl_offsets {
-	SLOT_RST = 		offsetof(struct ctrl_reg, slot_RST),
+	SLOT_RST =		offsetof(struct ctrl_reg, slot_RST),
 	SLOT_ENABLE =		offsetof(struct ctrl_reg, slot_enable),
 	MISC =			offsetof(struct ctrl_reg, misc),
 	LED_CONTROL =		offsetof(struct ctrl_reg, led_control),
 	INT_INPUT_CLEAR =	offsetof(struct ctrl_reg, int_input_clear),
-	INT_MASK = 		offsetof(struct ctrl_reg, int_mask),
-	CTRL_RESERVED0 = 	offsetof(struct ctrl_reg, reserved0),
+	INT_MASK =		offsetof(struct ctrl_reg, int_mask),
+	CTRL_RESERVED0 =	offsetof(struct ctrl_reg, reserved0),
 	CTRL_RESERVED1 =	offsetof(struct ctrl_reg, reserved1),
 	CTRL_RESERVED2 =	offsetof(struct ctrl_reg, reserved1),
-	GEN_OUTPUT_AB = 	offsetof(struct ctrl_reg, gen_output_AB),
-	NON_INT_INPUT = 	offsetof(struct ctrl_reg, non_int_input),
+	GEN_OUTPUT_AB =		offsetof(struct ctrl_reg, gen_output_AB),
+	NON_INT_INPUT =		offsetof(struct ctrl_reg, non_int_input),
 	CTRL_RESERVED3 =	offsetof(struct ctrl_reg, reserved3),
 	CTRL_RESERVED4 =	offsetof(struct ctrl_reg, reserved4),
 	CTRL_RESERVED5 =	offsetof(struct ctrl_reg, reserved5),
 	CTRL_RESERVED6 =	offsetof(struct ctrl_reg, reserved6),
 	CTRL_RESERVED7 =	offsetof(struct ctrl_reg, reserved7),
 	CTRL_RESERVED8 =	offsetof(struct ctrl_reg, reserved8),
-	SLOT_MASK = 		offsetof(struct ctrl_reg, slot_mask),
-	CTRL_RESERVED9 = 	offsetof(struct ctrl_reg, reserved9),
+	SLOT_MASK =		offsetof(struct ctrl_reg, slot_mask),
+	CTRL_RESERVED9 =	offsetof(struct ctrl_reg, reserved9),
 	CTRL_RESERVED10 =	offsetof(struct ctrl_reg, reserved10),
 	CTRL_RESERVED11 =	offsetof(struct ctrl_reg, reserved11),
 	SLOT_SERR =		offsetof(struct ctrl_reg, slot_SERR),
@@ -190,7 +190,9 @@ struct hrt {
 	u32 reserved2;
 } __attribute__ ((packed));
 
-/* offsets to the hotplug resource table registers based on the above structure layout */
+/* offsets to the hotplug resource table registers based on the above
+ * structure layout
+ */
 enum hrt_offsets {
 	SIG0 =			offsetof(struct hrt, sig0),
 	SIG1 =			offsetof(struct hrt, sig1),
@@ -217,18 +219,20 @@ struct slot_rt {
 	u16 pre_mem_length;
 } __attribute__ ((packed));
 
-/* offsets to the hotplug slot resource table registers based on the above structure layout */
+/* offsets to the hotplug slot resource table registers based on the above
+ * structure layout
+ */
 enum slot_rt_offsets {
 	DEV_FUNC =		offsetof(struct slot_rt, dev_func),
-	PRIMARY_BUS = 		offsetof(struct slot_rt, primary_bus),
-	SECONDARY_BUS = 	offsetof(struct slot_rt, secondary_bus),
-	MAX_BUS = 		offsetof(struct slot_rt, max_bus),
-	IO_BASE = 		offsetof(struct slot_rt, io_base),
-	IO_LENGTH = 		offsetof(struct slot_rt, io_length),
-	MEM_BASE = 		offsetof(struct slot_rt, mem_base),
-	MEM_LENGTH = 		offsetof(struct slot_rt, mem_length),
-	PRE_MEM_BASE = 		offsetof(struct slot_rt, pre_mem_base),
-	PRE_MEM_LENGTH = 	offsetof(struct slot_rt, pre_mem_length),
+	PRIMARY_BUS =		offsetof(struct slot_rt, primary_bus),
+	SECONDARY_BUS =		offsetof(struct slot_rt, secondary_bus),
+	MAX_BUS =		offsetof(struct slot_rt, max_bus),
+	IO_BASE =		offsetof(struct slot_rt, io_base),
+	IO_LENGTH =		offsetof(struct slot_rt, io_length),
+	MEM_BASE =		offsetof(struct slot_rt, mem_base),
+	MEM_LENGTH =		offsetof(struct slot_rt, mem_length),
+	PRE_MEM_BASE =		offsetof(struct slot_rt, pre_mem_base),
+	PRE_MEM_LENGTH =	offsetof(struct slot_rt, pre_mem_length),
 };
 
 struct pci_func {
@@ -286,8 +290,8 @@ struct event_info {
 struct controller {
 	struct controller *next;
 	u32 ctrl_int_comp;
-	struct mutex crit_sect;		/* critical section mutex */
-	void __iomem *hpc_reg;		/* cookie for our pci controller location */
+	struct mutex crit_sect;	/* critical section mutex */
+	void __iomem *hpc_reg;	/* cookie for our pci controller location */
 	struct pci_resource *mem_head;
 	struct pci_resource *p_mem_head;
 	struct pci_resource *io_head;
@@ -299,7 +303,7 @@ struct controller {
 	u8 next_event;
 	u8 interrupt;
 	u8 cfgspc_irq;
-	u8 bus;				/* bus number for the pci hotplug controller */
+	u8 bus;			/* bus number for the pci hotplug controller */
 	u8 rev;
 	u8 slot_device_offset;
 	u8 first_slot;
@@ -401,46 +405,57 @@ struct resource_lists {
 
 
 /* debugfs functions for the hotplug controller info */
-extern void cpqhp_initialize_debugfs		(void);
-extern void cpqhp_shutdown_debugfs		(void);
-extern void cpqhp_create_debugfs_files		(struct controller *ctrl);
-extern void cpqhp_remove_debugfs_files		(struct controller *ctrl);
+extern void cpqhp_initialize_debugfs(void);
+extern void cpqhp_shutdown_debugfs(void);
+extern void cpqhp_create_debugfs_files(struct controller *ctrl);
+extern void cpqhp_remove_debugfs_files(struct controller *ctrl);
 
 /* controller functions */
-extern void	cpqhp_pushbutton_thread		(unsigned long event_pointer);
-extern irqreturn_t cpqhp_ctrl_intr		(int IRQ, void *data);
-extern int	cpqhp_find_available_resources	(struct controller *ctrl, void __iomem *rom_start);
-extern int	cpqhp_event_start_thread	(void);
-extern void	cpqhp_event_stop_thread		(void);
-extern struct pci_func *cpqhp_slot_create	(unsigned char busnumber);
-extern struct pci_func *cpqhp_slot_find		(unsigned char bus, unsigned char device, unsigned char index);
-extern int	cpqhp_process_SI		(struct controller *ctrl, struct pci_func *func);
-extern int	cpqhp_process_SS		(struct controller *ctrl, struct pci_func *func);
-extern int	cpqhp_hardware_test		(struct controller *ctrl, int test_num);
+extern void cpqhp_pushbutton_thread(unsigned long event_pointer);
+extern irqreturn_t cpqhp_ctrl_intr(int IRQ, void *data);
+extern int cpqhp_find_available_resources(struct controller *ctrl,
+					  void __iomem *rom_start);
+extern int cpqhp_event_start_thread(void);
+extern void cpqhp_event_stop_thread(void);
+extern struct pci_func *cpqhp_slot_create(unsigned char busnumber);
+extern struct pci_func *cpqhp_slot_find(unsigned char bus, unsigned char device,
+					unsigned char index);
+extern int cpqhp_process_SI(struct controller *ctrl, struct pci_func *func);
+extern int cpqhp_process_SS(struct controller *ctrl, struct pci_func *func);
+extern int cpqhp_hardware_test(struct controller *ctrl, int test_num);
 
 /* resource functions */
 extern int	cpqhp_resource_sort_and_combine	(struct pci_resource **head);
 
 /* pci functions */
-extern int	cpqhp_set_irq			(u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num);
-extern int	cpqhp_get_bus_dev		(struct controller *ctrl, u8 *bus_num, u8 *dev_num, u8 slot);
-extern int	cpqhp_save_config		(struct controller *ctrl, int busnumber, int is_hot_plug);
-extern int	cpqhp_save_base_addr_length	(struct controller *ctrl, struct pci_func * func);
-extern int	cpqhp_save_used_resources	(struct controller *ctrl, struct pci_func * func);
-extern int	cpqhp_configure_board		(struct controller *ctrl, struct pci_func * func);
-extern int	cpqhp_save_slot_config		(struct controller *ctrl, struct pci_func * new_slot);
-extern int	cpqhp_valid_replace		(struct controller *ctrl, struct pci_func * func);
-extern void	cpqhp_destroy_board_resources	(struct pci_func * func);
-extern int	cpqhp_return_board_resources	(struct pci_func * func, struct resource_lists * resources);
-extern void	cpqhp_destroy_resource_list	(struct resource_lists * resources);
-extern int	cpqhp_configure_device		(struct controller* ctrl, struct pci_func* func);
-extern int	cpqhp_unconfigure_device	(struct pci_func* func);
+extern int cpqhp_set_irq(u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num);
+extern int cpqhp_get_bus_dev(struct controller *ctrl, u8 *bus_num, u8 *dev_num,
+			     u8 slot);
+extern int cpqhp_save_config(struct controller *ctrl, int busnumber,
+			     int is_hot_plug);
+extern int cpqhp_save_base_addr_length(struct controller *ctrl,
+				       struct pci_func *func);
+extern int cpqhp_save_used_resources(struct controller *ctrl,
+				     struct pci_func *func);
+extern int cpqhp_configure_board(struct controller *ctrl,
+				 struct pci_func *func);
+extern int cpqhp_save_slot_config(struct controller *ctrl,
+				  struct pci_func *new_slot);
+extern int cpqhp_valid_replace(struct controller *ctrl, struct pci_func *func);
+extern void cpqhp_destroy_board_resources(struct pci_func *func);
+extern int cpqhp_return_board_resources	(struct pci_func *func,
+					 struct resource_lists *resources);
+extern void cpqhp_destroy_resource_list(struct resource_lists *resources);
+extern int cpqhp_configure_device(struct controller *ctrl,
+				  struct pci_func *func);
+extern int cpqhp_unconfigure_device(struct pci_func *func);
 
 /* Global variables */
 extern int cpqhp_debug;
 extern int cpqhp_legacy_mode;
 extern struct controller *cpqhp_ctrl_list;
 extern struct pci_func *cpqhp_slot_list[256];
+extern struct irq_routing_table *cpqhp_routing_table;
 
 /* these can be gotten rid of, but for debugging they are purty */
 extern u8 cpqhp_nic_irq;
@@ -449,7 +464,7 @@ extern u8 cpqhp_disk_irq;
 
 /* inline functions */
 
-static inline char *slot_name(struct slot *slot)
+static inline const char *slot_name(struct slot *slot)
 {
 	return hotplug_slot_name(slot->hotplug_slot);
 }
@@ -458,9 +473,9 @@ static inline char *slot_name(struct slot *slot)
  * return_resource
  *
  * Puts node back in the resource list pointed to by head
- *
  */
-static inline void return_resource(struct pci_resource **head, struct pci_resource *node)
+static inline void return_resource(struct pci_resource **head,
+				   struct pci_resource *node)
 {
 	if (!node || !head)
 		return;
@@ -471,7 +486,7 @@ static inline void return_resource(struct pci_resource **head, struct pci_resour
 static inline void set_SOGO(struct controller *ctrl)
 {
 	u16 misc;
-	
+
 	misc = readw(ctrl->hpc_reg + MISC);
 	misc = (misc | 0x0001) & 0xFFFB;
 	writew(misc, ctrl->hpc_reg + MISC);
@@ -481,7 +496,7 @@ static inline void set_SOGO(struct controller *ctrl)
 static inline void amber_LED_on(struct controller *ctrl, u8 slot)
 {
 	u32 led_control;
-	
+
 	led_control = readl(ctrl->hpc_reg + LED_CONTROL);
 	led_control |= (0x01010000L << slot);
 	writel(led_control, ctrl->hpc_reg + LED_CONTROL);
@@ -491,7 +506,7 @@ static inline void amber_LED_on(struct controller *ctrl, u8 slot)
 static inline void amber_LED_off(struct controller *ctrl, u8 slot)
 {
 	u32 led_control;
-	
+
 	led_control = readl(ctrl->hpc_reg + LED_CONTROL);
 	led_control &= ~(0x01010000L << slot);
 	writel(led_control, ctrl->hpc_reg + LED_CONTROL);
@@ -504,7 +519,7 @@ static inline int read_amber_LED(struct controller *ctrl, u8 slot)
 
 	led_control = readl(ctrl->hpc_reg + LED_CONTROL);
 	led_control &= (0x01010000L << slot);
-	
+
 	return led_control ? 1 : 0;
 }
 
@@ -512,7 +527,7 @@ static inline int read_amber_LED(struct controller *ctrl, u8 slot)
 static inline void green_LED_on(struct controller *ctrl, u8 slot)
 {
 	u32 led_control;
-	
+
 	led_control = readl(ctrl->hpc_reg + LED_CONTROL);
 	led_control |= 0x0101L << slot;
 	writel(led_control, ctrl->hpc_reg + LED_CONTROL);
@@ -521,7 +536,7 @@ static inline void green_LED_on(struct controller *ctrl, u8 slot)
 static inline void green_LED_off(struct controller *ctrl, u8 slot)
 {
 	u32 led_control;
-	
+
 	led_control = readl(ctrl->hpc_reg + LED_CONTROL);
 	led_control &= ~(0x0101L << slot);
 	writel(led_control, ctrl->hpc_reg + LED_CONTROL);
@@ -531,7 +546,7 @@ static inline void green_LED_off(struct controller *ctrl, u8 slot)
 static inline void green_LED_blink(struct controller *ctrl, u8 slot)
 {
 	u32 led_control;
-	
+
 	led_control = readl(ctrl->hpc_reg + LED_CONTROL);
 	led_control &= ~(0x0101L << slot);
 	led_control |= (0x0001L << slot);
@@ -575,22 +590,21 @@ static inline u8 read_slot_enable(struct controller *ctrl)
 }
 
 
-/*
+/**
  * get_controller_speed - find the current frequency/mode of controller.
  *
  * @ctrl: controller to get frequency/mode for.
  *
  * Returns controller speed.
- *
  */
 static inline u8 get_controller_speed(struct controller *ctrl)
 {
 	u8 curr_freq;
- 	u16 misc;
- 	
+	u16 misc;
+
 	if (ctrl->pcix_support) {
 		curr_freq = readb(ctrl->hpc_reg + NEXT_CURR_FREQ);
-		if ((curr_freq & 0xB0) == 0xB0) 
+		if ((curr_freq & 0xB0) == 0xB0)
 			return PCI_SPEED_133MHz_PCIX;
 		if ((curr_freq & 0xA0) == 0xA0)
 			return PCI_SPEED_100MHz_PCIX;
@@ -602,19 +616,18 @@ static inline u8 get_controller_speed(struct controller *ctrl)
 		return PCI_SPEED_33MHz;
 	}
 
- 	misc = readw(ctrl->hpc_reg + MISC);
- 	return (misc & 0x0800) ? PCI_SPEED_66MHz : PCI_SPEED_33MHz;
+	misc = readw(ctrl->hpc_reg + MISC);
+	return (misc & 0x0800) ? PCI_SPEED_66MHz : PCI_SPEED_33MHz;
 }
- 
 
-/*
+
+/**
  * get_adapter_speed - find the max supported frequency/mode of adapter.
  *
  * @ctrl: hotplug controller.
  * @hp_slot: hotplug slot where adapter is installed.
  *
  * Returns adapter speed.
- *
  */
 static inline u8 get_adapter_speed(struct controller *ctrl, u8 hp_slot)
 {
@@ -672,7 +685,8 @@ static inline int get_slot_enabled(struct controller *ctrl, struct slot *slot)
 }
 
 
-static inline int cpq_get_latch_status(struct controller *ctrl, struct slot *slot)
+static inline int cpq_get_latch_status(struct controller *ctrl,
+				       struct slot *slot)
 {
 	u32 status;
 	u8 hp_slot;
@@ -687,7 +701,8 @@ static inline int cpq_get_latch_status(struct controller *ctrl, struct slot *slo
 }
 
 
-static inline int get_presence_status(struct controller *ctrl, struct slot *slot)
+static inline int get_presence_status(struct controller *ctrl,
+				      struct slot *slot)
 {
 	int presence_save = 0;
 	u8 hp_slot;
@@ -696,7 +711,8 @@ static inline int get_presence_status(struct controller *ctrl, struct slot *slot
 	hp_slot = slot->device - ctrl->slot_device_offset;
 
 	tempdword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
-	presence_save = (int) ((((~tempdword) >> 23) | ((~tempdword) >> 15)) >> hp_slot) & 0x02;
+	presence_save = (int) ((((~tempdword) >> 23) | ((~tempdword) >> 15))
+				>> hp_slot) & 0x02;
 
 	return presence_save;
 }
@@ -718,5 +734,12 @@ static inline int wait_for_ctrl_irq(struct controller *ctrl)
 	return retval;
 }
 
-#endif
+#include <asm/pci_x86.h>
+static inline int cpqhp_routing_table_length(void)
+{
+	BUG_ON(cpqhp_routing_table == NULL);
+	return ((cpqhp_routing_table->size - sizeof(struct irq_routing_table)) /
+		sizeof(struct irq_info));
+}
 
+#endif
diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index c2e1bcbb28a..075b4f4b6e0 100644
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -25,8 +25,7 @@
  * Send feedback to <greg@kroah.com>
  *
  * Jan 12, 2003 -	Added 66/100/133MHz PCI-X support,
- * 			Torben Mathiasen <torben.mathiasen@hp.com>
- *
+ *			Torben Mathiasen <torben.mathiasen@hp.com>
  */
 
 #include <linux/module.h>
@@ -45,7 +44,6 @@
 
 #include "cpqphp.h"
 #include "cpqphp_nvram.h"
-#include <asm/pci_x86.h>
 
 
 /* Global variables */
@@ -53,6 +51,7 @@ int cpqhp_debug;
 int cpqhp_legacy_mode;
 struct controller *cpqhp_ctrl_list;	/* = NULL */
 struct pci_func *cpqhp_slot_list[256];
+struct irq_routing_table *cpqhp_routing_table;
 
 /* local variables */
 static void __iomem *smbios_table;
@@ -78,33 +77,6 @@ MODULE_PARM_DESC(debug, "Debugging mode enabled or not");
 
 #define CPQHPC_MODULE_MINOR 208
 
-static int one_time_init	(void);
-static int set_attention_status	(struct hotplug_slot *slot, u8 value);
-static int process_SI		(struct hotplug_slot *slot);
-static int process_SS		(struct hotplug_slot *slot);
-static int hardware_test	(struct hotplug_slot *slot, u32 value);
-static int get_power_status	(struct hotplug_slot *slot, u8 *value);
-static int get_attention_status	(struct hotplug_slot *slot, u8 *value);
-static int get_latch_status	(struct hotplug_slot *slot, u8 *value);
-static int get_adapter_status	(struct hotplug_slot *slot, u8 *value);
-static int get_max_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *value);
-static int get_cur_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *value);
-
-static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = {
-	.owner =		THIS_MODULE,
-	.set_attention_status =	set_attention_status,
-	.enable_slot =		process_SI,
-	.disable_slot =		process_SS,
-	.hardware_test =	hardware_test,
-	.get_power_status =	get_power_status,
-	.get_attention_status =	get_attention_status,
-	.get_latch_status =	get_latch_status,
-	.get_adapter_status =	get_adapter_status,
-  	.get_max_bus_speed =	get_max_bus_speed,
-  	.get_cur_bus_speed =	get_cur_bus_speed,
-};
-
-
 static inline int is_slot64bit(struct slot *slot)
 {
 	return (readb(slot->p_sm_slot + SMBIOS_SLOT_WIDTH) == 0x06) ? 1 : 0;
@@ -144,7 +116,7 @@ static void __iomem * detect_SMBIOS_pointer(void __iomem *begin, void __iomem *e
 			break;
 		}
 	}
-	
+
 	if (!status)
 		fp = NULL;
 
@@ -171,7 +143,7 @@ static int init_SERR(struct controller * ctrl)
 	tempdword = ctrl->first_slot;
 
 	number_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F;
-	// Loop through slots
+	/* Loop through slots */
 	while (number_of_slots) {
 		physical_slot = tempdword;
 		writeb(0, ctrl->hpc_reg + SLOT_SERR);
@@ -182,41 +154,42 @@ static int init_SERR(struct controller * ctrl)
 	return 0;
 }
 
-
-/* nice debugging output */
-static int pci_print_IRQ_route (void)
+static int init_cpqhp_routing_table(void)
 {
-	struct irq_routing_table *routing_table;
 	int len;
-	int loop;
-
-	u8 tbus, tdevice, tslot;
 
-	routing_table = pcibios_get_irq_routing_table();
-	if (routing_table == NULL) {
-		err("No BIOS Routing Table??? Not good\n");
+	cpqhp_routing_table = pcibios_get_irq_routing_table();
+	if (cpqhp_routing_table == NULL)
 		return -ENOMEM;
-	}
 
-	len = (routing_table->size - sizeof(struct irq_routing_table)) /
-			sizeof(struct irq_info);
-	// Make sure I got at least one entry
+	len = cpqhp_routing_table_length();
 	if (len == 0) {
-		kfree(routing_table);
+		kfree(cpqhp_routing_table);
+		cpqhp_routing_table = NULL;
 		return -1;
 	}
 
-	dbg("bus dev func slot\n");
+	return 0;
+}
+
+/* nice debugging output */
+static void pci_print_IRQ_route(void)
+{
+	int len;
+	int loop;
+	u8 tbus, tdevice, tslot;
+
+	len = cpqhp_routing_table_length();
 
+	dbg("bus dev func slot\n");
 	for (loop = 0; loop < len; ++loop) {
-		tbus = routing_table->slots[loop].bus;
-		tdevice = routing_table->slots[loop].devfn;
-		tslot = routing_table->slots[loop].slot;
+		tbus = cpqhp_routing_table->slots[loop].bus;
+		tdevice = cpqhp_routing_table->slots[loop].devfn;
+		tslot = cpqhp_routing_table->slots[loop].slot;
 		dbg("%d %d %d %d\n", tbus, tdevice >> 3, tdevice & 0x7, tslot);
 
 	}
-	kfree(routing_table);
-	return 0;
+	return;
 }
 
 
@@ -242,9 +215,9 @@ static void __iomem *get_subsequent_smbios_entry(void __iomem *smbios_start,
 	void __iomem *p_max;
 
 	if (!smbios_table || !curr)
-		return(NULL);
+		return NULL;
 
-	// set p_max to the end of the table
+	/* set p_max to the end of the table */
 	p_max = smbios_start + readw(smbios_table + ST_LENGTH);
 
 	p_temp = curr;
@@ -253,20 +226,19 @@ static void __iomem *get_subsequent_smbios_entry(void __iomem *smbios_start,
 	while ((p_temp < p_max) && !bail) {
 		/* Look for the double NULL terminator
 		 * The first condition is the previous byte
-		 * and the second is the curr */
-		if (!previous_byte && !(readb(p_temp))) {
+		 * and the second is the curr
+		 */
+		if (!previous_byte && !(readb(p_temp)))
 			bail = 1;
-		}
 
 		previous_byte = readb(p_temp);
 		p_temp++;
 	}
 
-	if (p_temp < p_max) {
+	if (p_temp < p_max)
 		return p_temp;
-	} else {
+	else
 		return NULL;
-	}
 }
 
 
@@ -292,21 +264,18 @@ static void __iomem *get_SMBIOS_entry(void __iomem *smbios_start,
 	if (!smbios_table)
 		return NULL;
 
-	if (!previous) {		  
+	if (!previous)
 		previous = smbios_start;
-	} else {
+	else
 		previous = get_subsequent_smbios_entry(smbios_start,
 					smbios_table, previous);
-	}
 
-	while (previous) {
-	       	if (readb(previous + SMBIOS_GENERIC_TYPE) != type) {
+	while (previous)
+		if (readb(previous + SMBIOS_GENERIC_TYPE) != type)
 			previous = get_subsequent_smbios_entry(smbios_start,
 						smbios_table, previous);
-		} else {
+		else
 			break;
-		}
-	}
 
 	return previous;
 }
@@ -322,144 +291,6 @@ static void release_slot(struct hotplug_slot *hotplug_slot)
 	kfree(slot);
 }
 
-#define SLOT_NAME_SIZE 10
-
-static int ctrl_slot_setup(struct controller *ctrl,
-			void __iomem *smbios_start,
-			void __iomem *smbios_table)
-{
-	struct slot *slot;
-	struct hotplug_slot *hotplug_slot;
-	struct hotplug_slot_info *hotplug_slot_info;
-	u8 number_of_slots;
-	u8 slot_device;
-	u8 slot_number;
-	u8 ctrl_slot;
-	u32 tempdword;
-	char name[SLOT_NAME_SIZE];
-	void __iomem *slot_entry= NULL;
-	int result = -ENOMEM;
-
-	dbg("%s\n", __func__);
-
-	tempdword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
-
-	number_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F;
-	slot_device = readb(ctrl->hpc_reg + SLOT_MASK) >> 4;
-	slot_number = ctrl->first_slot;
-
-	while (number_of_slots) {
-		slot = kzalloc(sizeof(*slot), GFP_KERNEL);
-		if (!slot)
-			goto error;
-
-		slot->hotplug_slot = kzalloc(sizeof(*(slot->hotplug_slot)),
-						GFP_KERNEL);
-		if (!slot->hotplug_slot)
-			goto error_slot;
-		hotplug_slot = slot->hotplug_slot;
-
-		hotplug_slot->info =
-				kzalloc(sizeof(*(hotplug_slot->info)),
-							GFP_KERNEL);
-		if (!hotplug_slot->info)
-			goto error_hpslot;
-		hotplug_slot_info = hotplug_slot->info;
-
-		slot->ctrl = ctrl;
-		slot->bus = ctrl->bus;
-		slot->device = slot_device;
-		slot->number = slot_number;
-		dbg("slot->number = %u\n", slot->number);
-
-		slot_entry = get_SMBIOS_entry(smbios_start, smbios_table, 9,
-					slot_entry);
-
-		while (slot_entry && (readw(slot_entry + SMBIOS_SLOT_NUMBER) !=
-				slot->number)) {
-			slot_entry = get_SMBIOS_entry(smbios_start,
-						smbios_table, 9, slot_entry);
-		}
-
-		slot->p_sm_slot = slot_entry;
-
-		init_timer(&slot->task_event);
-		slot->task_event.expires = jiffies + 5 * HZ;
-		slot->task_event.function = cpqhp_pushbutton_thread;
-
-		//FIXME: these capabilities aren't used but if they are
-		//       they need to be correctly implemented
-		slot->capabilities |= PCISLOT_REPLACE_SUPPORTED;
-		slot->capabilities |= PCISLOT_INTERLOCK_SUPPORTED;
-
-		if (is_slot64bit(slot))
-			slot->capabilities |= PCISLOT_64_BIT_SUPPORTED;
-		if (is_slot66mhz(slot))
-			slot->capabilities |= PCISLOT_66_MHZ_SUPPORTED;
-		if (ctrl->speed == PCI_SPEED_66MHz)
-			slot->capabilities |= PCISLOT_66_MHZ_OPERATION;
-
-		ctrl_slot =
-			slot_device - (readb(ctrl->hpc_reg + SLOT_MASK) >> 4);
-
-		// Check presence
-		slot->capabilities |=
-			((((~tempdword) >> 23) |
-			 ((~tempdword) >> 15)) >> ctrl_slot) & 0x02;
-		// Check the switch state
-		slot->capabilities |=
-			((~tempdword & 0xFF) >> ctrl_slot) & 0x01;
-		// Check the slot enable
-		slot->capabilities |=
-			((read_slot_enable(ctrl) << 2) >> ctrl_slot) & 0x04;
-
-		/* register this slot with the hotplug pci core */
-		hotplug_slot->release = &release_slot;
-		hotplug_slot->private = slot;
-		snprintf(name, SLOT_NAME_SIZE, "%u", slot->number);
-		hotplug_slot->ops = &cpqphp_hotplug_slot_ops;
-
-		hotplug_slot_info->power_status = get_slot_enabled(ctrl, slot);
-		hotplug_slot_info->attention_status =
-			cpq_get_attention_status(ctrl, slot);
-		hotplug_slot_info->latch_status =
-			cpq_get_latch_status(ctrl, slot);
-		hotplug_slot_info->adapter_status =
-			get_presence_status(ctrl, slot);
-		
-		dbg("registering bus %d, dev %d, number %d, "
-				"ctrl->slot_device_offset %d, slot %d\n",
-				slot->bus, slot->device,
-				slot->number, ctrl->slot_device_offset,
-				slot_number);
-		result = pci_hp_register(hotplug_slot,
-					 ctrl->pci_dev->bus,
-					 slot->device,
-					 name);
-		if (result) {
-			err("pci_hp_register failed with error %d\n", result);
-			goto error_info;
-		}
-		
-		slot->next = ctrl->slot;
-		ctrl->slot = slot;
-
-		number_of_slots--;
-		slot_device++;
-		slot_number++;
-	}
-
-	return 0;
-error_info:
-	kfree(hotplug_slot_info);
-error_hpslot:
-	kfree(hotplug_slot);
-error_slot:
-	kfree(slot);
-error:
-	return result;
-}
-
 static int ctrl_slot_cleanup (struct controller * ctrl)
 {
 	struct slot *old_slot, *next_slot;
@@ -476,36 +307,32 @@ static int ctrl_slot_cleanup (struct controller * ctrl)
 
 	cpqhp_remove_debugfs_files(ctrl);
 
-	//Free IRQ associated with hot plug device
+	/* Free IRQ associated with hot plug device */
 	free_irq(ctrl->interrupt, ctrl);
-	//Unmap the memory
+	/* Unmap the memory */
 	iounmap(ctrl->hpc_reg);
-	//Finally reclaim PCI mem
+	/* Finally reclaim PCI mem */
 	release_mem_region(pci_resource_start(ctrl->pci_dev, 0),
 			   pci_resource_len(ctrl->pci_dev, 0));
 
-	return(0);
+	return 0;
 }
 
 
-//============================================================================
-// function:	get_slot_mapping
-//
-// Description: Attempts to determine a logical slot mapping for a PCI
-//		device.  Won't work for more than one PCI-PCI bridge
-//		in a slot.
-//
-// Input:	u8 bus_num - bus number of PCI device
-//		u8 dev_num - device number of PCI device
-//		u8 *slot - Pointer to u8 where slot number will
-//			be returned
-//
-// Output:	SUCCESS or FAILURE
-//=============================================================================
+/**
+ * get_slot_mapping - determine logical slot mapping for PCI device
+ *
+ * Won't work for more than one PCI-PCI bridge in a slot.
+ *
+ * @bus_num - bus number of PCI device
+ * @dev_num - device number of PCI device
+ * @slot - Pointer to u8 where slot number will	be returned
+ *
+ * Output:	SUCCESS or FAILURE
+ */
 static int
 get_slot_mapping(struct pci_bus *bus, u8 bus_num, u8 dev_num, u8 *slot)
 {
-	struct irq_routing_table *PCIIRQRoutingInfoLength;
 	u32 work;
 	long len;
 	long loop;
@@ -516,36 +343,25 @@ get_slot_mapping(struct pci_bus *bus, u8 bus_num, u8 dev_num, u8 *slot)
 
 	bridgeSlot = 0xFF;
 
-	PCIIRQRoutingInfoLength = pcibios_get_irq_routing_table();
-	if (!PCIIRQRoutingInfoLength)
-		return -1;
-
-	len = (PCIIRQRoutingInfoLength->size -
-	       sizeof(struct irq_routing_table)) / sizeof(struct irq_info);
-	// Make sure I got at least one entry
-	if (len == 0) {
-		kfree(PCIIRQRoutingInfoLength);
-		return -1;
-	}
-
+	len = cpqhp_routing_table_length();
 	for (loop = 0; loop < len; ++loop) {
-		tbus = PCIIRQRoutingInfoLength->slots[loop].bus;
-		tdevice = PCIIRQRoutingInfoLength->slots[loop].devfn >> 3;
-		tslot = PCIIRQRoutingInfoLength->slots[loop].slot;
+		tbus = cpqhp_routing_table->slots[loop].bus;
+		tdevice = cpqhp_routing_table->slots[loop].devfn >> 3;
+		tslot = cpqhp_routing_table->slots[loop].slot;
 
 		if ((tbus == bus_num) && (tdevice == dev_num)) {
 			*slot = tslot;
-			kfree(PCIIRQRoutingInfoLength);
 			return 0;
 		} else {
 			/* Did not get a match on the target PCI device. Check
-			 * if the current IRQ table entry is a PCI-to-PCI bridge
-			 * device.  If so, and it's secondary bus matches the
-			 * bus number for the target device, I need to save the
-			 * bridge's slot number.  If I can not find an entry for
-			 * the target device, I will have to assume it's on the
-			 * other side of the bridge, and assign it the bridge's
-			 * slot. */
+			 * if the current IRQ table entry is a PCI-to-PCI
+			 * bridge device.  If so, and it's secondary bus
+			 * matches the bus number for the target device, I need
+			 * to save the bridge's slot number.  If I can not find
+			 * an entry for the target device, I will have to
+			 * assume it's on the other side of the bridge, and
+			 * assign it the bridge's slot.
+			 */
 			bus->number = tbus;
 			pci_bus_read_config_dword(bus, PCI_DEVFN(tdevice, 0),
 						PCI_CLASS_REVISION, &work);
@@ -555,25 +371,23 @@ get_slot_mapping(struct pci_bus *bus, u8 bus_num, u8 dev_num, u8 *slot)
 							PCI_DEVFN(tdevice, 0),
 							PCI_PRIMARY_BUS, &work);
 				// See if bridge's secondary bus matches target bus.
-				if (((work >> 8) & 0x000000FF) == (long) bus_num) {
+				if (((work >> 8) & 0x000000FF) == (long) bus_num)
 					bridgeSlot = tslot;
-				}
 			}
 		}
 
 	}
 
-	// If we got here, we didn't find an entry in the IRQ mapping table 
-	// for the target PCI device.  If we did determine that the target 
-	// device is on the other side of a PCI-to-PCI bridge, return the 
-	// slot number for the bridge.
+	/* If we got here, we didn't find an entry in the IRQ mapping table for
+	 * the target PCI device.  If we did determine that the target device
+	 * is on the other side of a PCI-to-PCI bridge, return the slot number
+	 * for the bridge.
+	 */
 	if (bridgeSlot != 0xFF) {
 		*slot = bridgeSlot;
-		kfree(PCIIRQRoutingInfoLength);
 		return 0;
 	}
-	kfree(PCIIRQRoutingInfoLength);
-	// Couldn't find an entry in the routing table for this PCI device
+	/* Couldn't find an entry in the routing table for this PCI device */
 	return -1;
 }
 
@@ -591,32 +405,32 @@ cpqhp_set_attention_status(struct controller *ctrl, struct pci_func *func,
 	u8 hp_slot;
 
 	if (func == NULL)
-		return(1);
+		return 1;
 
 	hp_slot = func->device - ctrl->slot_device_offset;
 
-	// Wait for exclusive access to hardware
+	/* Wait for exclusive access to hardware */
 	mutex_lock(&ctrl->crit_sect);
 
-	if (status == 1) {
+	if (status == 1)
 		amber_LED_on (ctrl, hp_slot);
-	} else if (status == 0) {
+	else if (status == 0)
 		amber_LED_off (ctrl, hp_slot);
-	} else {
-		// Done with exclusive hardware access
+	else {
+		/* Done with exclusive hardware access */
 		mutex_unlock(&ctrl->crit_sect);
-		return(1);
+		return 1;
 	}
 
 	set_SOGO(ctrl);
 
-	// Wait for SOBS to be unset
+	/* Wait for SOBS to be unset */
 	wait_for_ctrl_irq (ctrl);
 
-	// Done with exclusive hardware access
+	/* Done with exclusive hardware access */
 	mutex_unlock(&ctrl->crit_sect);
 
-	return(0);
+	return 0;
 }
 
 
@@ -719,7 +533,7 @@ static int hardware_test(struct hotplug_slot *hotplug_slot, u32 value)
 
 	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
 
-	return cpqhp_hardware_test(ctrl, value);	
+	return cpqhp_hardware_test(ctrl, value);
 }
 
 
@@ -738,7 +552,7 @@ static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value)
 {
 	struct slot *slot = hotplug_slot->private;
 	struct controller *ctrl = slot->ctrl;
-	
+
 	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
 
 	*value = cpq_get_attention_status(ctrl, slot);
@@ -793,6 +607,230 @@ static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_sp
 	return 0;
 }
 
+static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = {
+	.set_attention_status =	set_attention_status,
+	.enable_slot =		process_SI,
+	.disable_slot =		process_SS,
+	.hardware_test =	hardware_test,
+	.get_power_status =	get_power_status,
+	.get_attention_status =	get_attention_status,
+	.get_latch_status =	get_latch_status,
+	.get_adapter_status =	get_adapter_status,
+	.get_max_bus_speed =	get_max_bus_speed,
+	.get_cur_bus_speed =	get_cur_bus_speed,
+};
+
+#define SLOT_NAME_SIZE 10
+
+static int ctrl_slot_setup(struct controller *ctrl,
+			void __iomem *smbios_start,
+			void __iomem *smbios_table)
+{
+	struct slot *slot;
+	struct hotplug_slot *hotplug_slot;
+	struct hotplug_slot_info *hotplug_slot_info;
+	u8 number_of_slots;
+	u8 slot_device;
+	u8 slot_number;
+	u8 ctrl_slot;
+	u32 tempdword;
+	char name[SLOT_NAME_SIZE];
+	void __iomem *slot_entry= NULL;
+	int result = -ENOMEM;
+
+	dbg("%s\n", __func__);
+
+	tempdword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
+
+	number_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F;
+	slot_device = readb(ctrl->hpc_reg + SLOT_MASK) >> 4;
+	slot_number = ctrl->first_slot;
+
+	while (number_of_slots) {
+		slot = kzalloc(sizeof(*slot), GFP_KERNEL);
+		if (!slot)
+			goto error;
+
+		slot->hotplug_slot = kzalloc(sizeof(*(slot->hotplug_slot)),
+						GFP_KERNEL);
+		if (!slot->hotplug_slot)
+			goto error_slot;
+		hotplug_slot = slot->hotplug_slot;
+
+		hotplug_slot->info = kzalloc(sizeof(*(hotplug_slot->info)),
+							GFP_KERNEL);
+		if (!hotplug_slot->info)
+			goto error_hpslot;
+		hotplug_slot_info = hotplug_slot->info;
+
+		slot->ctrl = ctrl;
+		slot->bus = ctrl->bus;
+		slot->device = slot_device;
+		slot->number = slot_number;
+		dbg("slot->number = %u\n", slot->number);
+
+		slot_entry = get_SMBIOS_entry(smbios_start, smbios_table, 9,
+					slot_entry);
+
+		while (slot_entry && (readw(slot_entry + SMBIOS_SLOT_NUMBER) !=
+				slot->number)) {
+			slot_entry = get_SMBIOS_entry(smbios_start,
+						smbios_table, 9, slot_entry);
+		}
+
+		slot->p_sm_slot = slot_entry;
+
+		init_timer(&slot->task_event);
+		slot->task_event.expires = jiffies + 5 * HZ;
+		slot->task_event.function = cpqhp_pushbutton_thread;
+
+		/*FIXME: these capabilities aren't used but if they are
+		 *	 they need to be correctly implemented
+		 */
+		slot->capabilities |= PCISLOT_REPLACE_SUPPORTED;
+		slot->capabilities |= PCISLOT_INTERLOCK_SUPPORTED;
+
+		if (is_slot64bit(slot))
+			slot->capabilities |= PCISLOT_64_BIT_SUPPORTED;
+		if (is_slot66mhz(slot))
+			slot->capabilities |= PCISLOT_66_MHZ_SUPPORTED;
+		if (ctrl->speed == PCI_SPEED_66MHz)
+			slot->capabilities |= PCISLOT_66_MHZ_OPERATION;
+
+		ctrl_slot =
+			slot_device - (readb(ctrl->hpc_reg + SLOT_MASK) >> 4);
+
+		/* Check presence */
+		slot->capabilities |=
+			((((~tempdword) >> 23) |
+			 ((~tempdword) >> 15)) >> ctrl_slot) & 0x02;
+		/* Check the switch state */
+		slot->capabilities |=
+			((~tempdword & 0xFF) >> ctrl_slot) & 0x01;
+		/* Check the slot enable */
+		slot->capabilities |=
+			((read_slot_enable(ctrl) << 2) >> ctrl_slot) & 0x04;
+
+		/* register this slot with the hotplug pci core */
+		hotplug_slot->release = &release_slot;
+		hotplug_slot->private = slot;
+		snprintf(name, SLOT_NAME_SIZE, "%u", slot->number);
+		hotplug_slot->ops = &cpqphp_hotplug_slot_ops;
+
+		hotplug_slot_info->power_status = get_slot_enabled(ctrl, slot);
+		hotplug_slot_info->attention_status =
+			cpq_get_attention_status(ctrl, slot);
+		hotplug_slot_info->latch_status =
+			cpq_get_latch_status(ctrl, slot);
+		hotplug_slot_info->adapter_status =
+			get_presence_status(ctrl, slot);
+
+		dbg("registering bus %d, dev %d, number %d, "
+				"ctrl->slot_device_offset %d, slot %d\n",
+				slot->bus, slot->device,
+				slot->number, ctrl->slot_device_offset,
+				slot_number);
+		result = pci_hp_register(hotplug_slot,
+					 ctrl->pci_dev->bus,
+					 slot->device,
+					 name);
+		if (result) {
+			err("pci_hp_register failed with error %d\n", result);
+			goto error_info;
+		}
+
+		slot->next = ctrl->slot;
+		ctrl->slot = slot;
+
+		number_of_slots--;
+		slot_device++;
+		slot_number++;
+	}
+
+	return 0;
+error_info:
+	kfree(hotplug_slot_info);
+error_hpslot:
+	kfree(hotplug_slot);
+error_slot:
+	kfree(slot);
+error:
+	return result;
+}
+
+static int one_time_init(void)
+{
+	int loop;
+	int retval = 0;
+
+	if (initialized)
+		return 0;
+
+	power_mode = 0;
+
+	retval = init_cpqhp_routing_table();
+	if (retval)
+		goto error;
+
+	if (cpqhp_debug)
+		pci_print_IRQ_route();
+
+	dbg("Initialize + Start the notification mechanism \n");
+
+	retval = cpqhp_event_start_thread();
+	if (retval)
+		goto error;
+
+	dbg("Initialize slot lists\n");
+	for (loop = 0; loop < 256; loop++)
+		cpqhp_slot_list[loop] = NULL;
+
+	/* FIXME: We also need to hook the NMI handler eventually.
+	 * this also needs to be worked with Christoph
+	 * register_NMI_handler();
+	 */
+	/* Map rom address */
+	cpqhp_rom_start = ioremap(ROM_PHY_ADDR, ROM_PHY_LEN);
+	if (!cpqhp_rom_start) {
+		err ("Could not ioremap memory region for ROM\n");
+		retval = -EIO;
+		goto error;
+	}
+
+	/* Now, map the int15 entry point if we are on compaq specific
+	 * hardware
+	 */
+	compaq_nvram_init(cpqhp_rom_start);
+
+	/* Map smbios table entry point structure */
+	smbios_table = detect_SMBIOS_pointer(cpqhp_rom_start,
+					cpqhp_rom_start + ROM_PHY_LEN);
+	if (!smbios_table) {
+		err ("Could not find the SMBIOS pointer in memory\n");
+		retval = -EIO;
+		goto error_rom_start;
+	}
+
+	smbios_start = ioremap(readl(smbios_table + ST_ADDRESS),
+					readw(smbios_table + ST_LENGTH));
+	if (!smbios_start) {
+		err ("Could not ioremap memory region taken from SMBIOS values\n");
+		retval = -EIO;
+		goto error_smbios_start;
+	}
+
+	initialized = 1;
+
+	return retval;
+
+error_smbios_start:
+	iounmap(smbios_start);
+error_rom_start:
+	iounmap(cpqhp_rom_start);
+error:
+	return retval;
+}
+
 static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	u8 num_of_slots = 0;
@@ -815,7 +853,9 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		return err;
 	}
 
-	// Need to read VID early b/c it's used to differentiate CPQ and INTC discovery
+	/* Need to read VID early b/c it's used to differentiate CPQ and INTC
+	 * discovery
+	 */
 	rc = pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor_id);
 	if (rc || ((vendor_id != PCI_VENDOR_ID_COMPAQ) && (vendor_id != PCI_VENDOR_ID_INTEL))) {
 		err(msg_HPC_non_compaq_or_intel);
@@ -832,217 +872,209 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 
 	/* Check for the proper subsytem ID's
-	 * Intel uses a different SSID programming model than Compaq.  
+	 * Intel uses a different SSID programming model than Compaq.
 	 * For Intel, each SSID bit identifies a PHP capability.
 	 * Also Intel HPC's may have RID=0.
 	 */
-	if ((pdev->revision > 2) || (vendor_id == PCI_VENDOR_ID_INTEL)) {
-		// TODO: This code can be made to support non-Compaq or Intel subsystem IDs
-		rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &subsystem_vid);
-		if (rc) {
-			err("%s : pci_read_config_word failed\n", __func__);
-			goto err_disable_device;
-		}
-		dbg("Subsystem Vendor ID: %x\n", subsystem_vid);
-		if ((subsystem_vid != PCI_VENDOR_ID_COMPAQ) && (subsystem_vid != PCI_VENDOR_ID_INTEL)) {
-			err(msg_HPC_non_compaq_or_intel);
-			rc = -ENODEV;
-			goto err_disable_device;
-		}
+	if ((pdev->revision <= 2) && (vendor_id != PCI_VENDOR_ID_INTEL)) {
+		err(msg_HPC_not_supported);
+		return -ENODEV;
+	}
 
-		ctrl = kzalloc(sizeof(struct controller), GFP_KERNEL);
-		if (!ctrl) {
-			err("%s : out of memory\n", __func__);
-			rc = -ENOMEM;
-			goto err_disable_device;
-		}
+	/* TODO: This code can be made to support non-Compaq or Intel
+	 * subsystem IDs
+	 */
+	rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &subsystem_vid);
+	if (rc) {
+		err("%s : pci_read_config_word failed\n", __func__);
+		goto err_disable_device;
+	}
+	dbg("Subsystem Vendor ID: %x\n", subsystem_vid);
+	if ((subsystem_vid != PCI_VENDOR_ID_COMPAQ) && (subsystem_vid != PCI_VENDOR_ID_INTEL)) {
+		err(msg_HPC_non_compaq_or_intel);
+		rc = -ENODEV;
+		goto err_disable_device;
+	}
 
-		rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &subsystem_deviceid);
-		if (rc) {
-			err("%s : pci_read_config_word failed\n", __func__);
-			goto err_free_ctrl;
-		}
+	ctrl = kzalloc(sizeof(struct controller), GFP_KERNEL);
+	if (!ctrl) {
+		err("%s : out of memory\n", __func__);
+		rc = -ENOMEM;
+		goto err_disable_device;
+	}
 
-		info("Hot Plug Subsystem Device ID: %x\n", subsystem_deviceid);
-
-		/* Set Vendor ID, so it can be accessed later from other functions */
-		ctrl->vendor_id = vendor_id;
-
-		switch (subsystem_vid) {
-			case PCI_VENDOR_ID_COMPAQ:
-				if (pdev->revision >= 0x13) { /* CIOBX */
-					ctrl->push_flag = 1;
-					ctrl->slot_switch_type = 1;
-					ctrl->push_button = 1;
-					ctrl->pci_config_space = 1;
-					ctrl->defeature_PHP = 1;
-					ctrl->pcix_support = 1;
-					ctrl->pcix_speed_capability = 1;
-					pci_read_config_byte(pdev, 0x41, &bus_cap);
-					if (bus_cap & 0x80) {
-						dbg("bus max supports 133MHz PCI-X\n");
-						ctrl->speed_capability = PCI_SPEED_133MHz_PCIX;
-						break;
-					}
-					if (bus_cap & 0x40) {
-						dbg("bus max supports 100MHz PCI-X\n");
-						ctrl->speed_capability = PCI_SPEED_100MHz_PCIX;
-						break;
-					}
-					if (bus_cap & 20) {
-						dbg("bus max supports 66MHz PCI-X\n");
-						ctrl->speed_capability = PCI_SPEED_66MHz_PCIX;
-						break;
-					}
-					if (bus_cap & 10) {
-						dbg("bus max supports 66MHz PCI\n");
-						ctrl->speed_capability = PCI_SPEED_66MHz;
-						break;
-					}
-
-					break;
-				}
-
-				switch (subsystem_deviceid) {
-					case PCI_SUB_HPC_ID:
-						/* Original 6500/7000 implementation */
-						ctrl->slot_switch_type = 1;
-						ctrl->speed_capability = PCI_SPEED_33MHz;
-						ctrl->push_button = 0;
-						ctrl->pci_config_space = 1;
-						ctrl->defeature_PHP = 1;
-						ctrl->pcix_support = 0;
-						ctrl->pcix_speed_capability = 0;
-						break;
-					case PCI_SUB_HPC_ID2:
-						/* First Pushbutton implementation */
-						ctrl->push_flag = 1;
-						ctrl->slot_switch_type = 1;
-						ctrl->speed_capability = PCI_SPEED_33MHz;
-						ctrl->push_button = 1;
-						ctrl->pci_config_space = 1;
-						ctrl->defeature_PHP = 1;
-						ctrl->pcix_support = 0;
-						ctrl->pcix_speed_capability = 0;
-						break;
-					case PCI_SUB_HPC_ID_INTC:
-						/* Third party (6500/7000) */
-						ctrl->slot_switch_type = 1;
-						ctrl->speed_capability = PCI_SPEED_33MHz;
-						ctrl->push_button = 0;
-						ctrl->pci_config_space = 1;
-						ctrl->defeature_PHP = 1;
-						ctrl->pcix_support = 0;
-						ctrl->pcix_speed_capability = 0;
-						break;
-					case PCI_SUB_HPC_ID3:
-						/* First 66 Mhz implementation */
-						ctrl->push_flag = 1;
-						ctrl->slot_switch_type = 1;
-						ctrl->speed_capability = PCI_SPEED_66MHz;
-						ctrl->push_button = 1;
-						ctrl->pci_config_space = 1;
-						ctrl->defeature_PHP = 1;
-						ctrl->pcix_support = 0;
-						ctrl->pcix_speed_capability = 0;
-						break;
-					case PCI_SUB_HPC_ID4:
-						/* First PCI-X implementation, 100MHz */
-						ctrl->push_flag = 1;
-						ctrl->slot_switch_type = 1;
-						ctrl->speed_capability = PCI_SPEED_100MHz_PCIX;
-						ctrl->push_button = 1;
-						ctrl->pci_config_space = 1;
-						ctrl->defeature_PHP = 1;
-						ctrl->pcix_support = 1;
-						ctrl->pcix_speed_capability = 0;	
-						break;
-					default:
-						err(msg_HPC_not_supported);
-						rc = -ENODEV;
-						goto err_free_ctrl;
-				}
-				break;
+	rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &subsystem_deviceid);
+	if (rc) {
+		err("%s : pci_read_config_word failed\n", __func__);
+		goto err_free_ctrl;
+	}
 
-			case PCI_VENDOR_ID_INTEL:
-				/* Check for speed capability (0=33, 1=66) */
-				if (subsystem_deviceid & 0x0001) {
-					ctrl->speed_capability = PCI_SPEED_66MHz;
-				} else {
-					ctrl->speed_capability = PCI_SPEED_33MHz;
-				}
-
-				/* Check for push button */
-				if (subsystem_deviceid & 0x0002) {
-					/* no push button */
-					ctrl->push_button = 0;
-				} else {
-					/* push button supported */
-					ctrl->push_button = 1;
-				}
-
-				/* Check for slot switch type (0=mechanical, 1=not mechanical) */
-				if (subsystem_deviceid & 0x0004) {
-					/* no switch */
-					ctrl->slot_switch_type = 0;
-				} else {
-					/* switch */
-					ctrl->slot_switch_type = 1;
-				}
-
-				/* PHP Status (0=De-feature PHP, 1=Normal operation) */
-				if (subsystem_deviceid & 0x0008) {
-					ctrl->defeature_PHP = 1;	// PHP supported
-				} else {
-					ctrl->defeature_PHP = 0;	// PHP not supported
-				}
-
-				/* Alternate Base Address Register Interface (0=not supported, 1=supported) */
-				if (subsystem_deviceid & 0x0010) {
-					ctrl->alternate_base_address = 1;	// supported
-				} else {
-					ctrl->alternate_base_address = 0;	// not supported
-				}
-
-				/* PCI Config Space Index (0=not supported, 1=supported) */
-				if (subsystem_deviceid & 0x0020) {
-					ctrl->pci_config_space = 1;		// supported
-				} else {
-					ctrl->pci_config_space = 0;		// not supported
-				}
-
-				/* PCI-X support */
-				if (subsystem_deviceid & 0x0080) {
-					/* PCI-X capable */
-					ctrl->pcix_support = 1;
-					/* Frequency of operation in PCI-X mode */
-					if (subsystem_deviceid & 0x0040) {
-						/* 133MHz PCI-X if bit 7 is 1 */
-						ctrl->pcix_speed_capability = 1;
-					} else {
-						/* 100MHz PCI-X if bit 7 is 1 and bit 0 is 0, */
-						/* 66MHz PCI-X if bit 7 is 1 and bit 0 is 1 */
-						ctrl->pcix_speed_capability = 0;
-					}
-				} else {
-					/* Conventional PCI */
-					ctrl->pcix_support = 0;
-					ctrl->pcix_speed_capability = 0;
-				}
+	info("Hot Plug Subsystem Device ID: %x\n", subsystem_deviceid);
+
+	/* Set Vendor ID, so it can be accessed later from other
+	 * functions
+	 */
+	ctrl->vendor_id = vendor_id;
+
+	switch (subsystem_vid) {
+	case PCI_VENDOR_ID_COMPAQ:
+		if (pdev->revision >= 0x13) { /* CIOBX */
+			ctrl->push_flag = 1;
+			ctrl->slot_switch_type = 1;
+			ctrl->push_button = 1;
+			ctrl->pci_config_space = 1;
+			ctrl->defeature_PHP = 1;
+			ctrl->pcix_support = 1;
+			ctrl->pcix_speed_capability = 1;
+			pci_read_config_byte(pdev, 0x41, &bus_cap);
+			if (bus_cap & 0x80) {
+				dbg("bus max supports 133MHz PCI-X\n");
+				ctrl->speed_capability = PCI_SPEED_133MHz_PCIX;
 				break;
+			}
+			if (bus_cap & 0x40) {
+				dbg("bus max supports 100MHz PCI-X\n");
+				ctrl->speed_capability = PCI_SPEED_100MHz_PCIX;
+				break;
+			}
+			if (bus_cap & 20) {
+				dbg("bus max supports 66MHz PCI-X\n");
+				ctrl->speed_capability = PCI_SPEED_66MHz_PCIX;
+				break;
+			}
+			if (bus_cap & 10) {
+				dbg("bus max supports 66MHz PCI\n");
+				ctrl->speed_capability = PCI_SPEED_66MHz;
+				break;
+			}
+
+			break;
+		}
 
-			default:
-				err(msg_HPC_not_supported);
-				rc = -ENODEV;
-				goto err_free_ctrl;
+		switch (subsystem_deviceid) {
+		case PCI_SUB_HPC_ID:
+			/* Original 6500/7000 implementation */
+			ctrl->slot_switch_type = 1;
+			ctrl->speed_capability = PCI_SPEED_33MHz;
+			ctrl->push_button = 0;
+			ctrl->pci_config_space = 1;
+			ctrl->defeature_PHP = 1;
+			ctrl->pcix_support = 0;
+			ctrl->pcix_speed_capability = 0;
+			break;
+		case PCI_SUB_HPC_ID2:
+			/* First Pushbutton implementation */
+			ctrl->push_flag = 1;
+			ctrl->slot_switch_type = 1;
+			ctrl->speed_capability = PCI_SPEED_33MHz;
+			ctrl->push_button = 1;
+			ctrl->pci_config_space = 1;
+			ctrl->defeature_PHP = 1;
+			ctrl->pcix_support = 0;
+			ctrl->pcix_speed_capability = 0;
+			break;
+		case PCI_SUB_HPC_ID_INTC:
+			/* Third party (6500/7000) */
+			ctrl->slot_switch_type = 1;
+			ctrl->speed_capability = PCI_SPEED_33MHz;
+			ctrl->push_button = 0;
+			ctrl->pci_config_space = 1;
+			ctrl->defeature_PHP = 1;
+			ctrl->pcix_support = 0;
+			ctrl->pcix_speed_capability = 0;
+			break;
+		case PCI_SUB_HPC_ID3:
+			/* First 66 Mhz implementation */
+			ctrl->push_flag = 1;
+			ctrl->slot_switch_type = 1;
+			ctrl->speed_capability = PCI_SPEED_66MHz;
+			ctrl->push_button = 1;
+			ctrl->pci_config_space = 1;
+			ctrl->defeature_PHP = 1;
+			ctrl->pcix_support = 0;
+			ctrl->pcix_speed_capability = 0;
+			break;
+		case PCI_SUB_HPC_ID4:
+			/* First PCI-X implementation, 100MHz */
+			ctrl->push_flag = 1;
+			ctrl->slot_switch_type = 1;
+			ctrl->speed_capability = PCI_SPEED_100MHz_PCIX;
+			ctrl->push_button = 1;
+			ctrl->pci_config_space = 1;
+			ctrl->defeature_PHP = 1;
+			ctrl->pcix_support = 1;
+			ctrl->pcix_speed_capability = 0;
+			break;
+		default:
+			err(msg_HPC_not_supported);
+			rc = -ENODEV;
+			goto err_free_ctrl;
 		}
+		break;
+
+	case PCI_VENDOR_ID_INTEL:
+		/* Check for speed capability (0=33, 1=66) */
+		if (subsystem_deviceid & 0x0001)
+			ctrl->speed_capability = PCI_SPEED_66MHz;
+		else
+			ctrl->speed_capability = PCI_SPEED_33MHz;
+
+		/* Check for push button */
+		if (subsystem_deviceid & 0x0002)
+			ctrl->push_button = 0;
+		else
+			ctrl->push_button = 1;
+
+		/* Check for slot switch type (0=mechanical, 1=not mechanical) */
+		if (subsystem_deviceid & 0x0004)
+			ctrl->slot_switch_type = 0;
+		else
+			ctrl->slot_switch_type = 1;
+
+		/* PHP Status (0=De-feature PHP, 1=Normal operation) */
+		if (subsystem_deviceid & 0x0008)
+			ctrl->defeature_PHP = 1;	/* PHP supported */
+		else
+			ctrl->defeature_PHP = 0;	/* PHP not supported */
+
+		/* Alternate Base Address Register Interface
+		 * (0=not supported, 1=supported)
+		 */
+		if (subsystem_deviceid & 0x0010)
+			ctrl->alternate_base_address = 1;
+		else
+			ctrl->alternate_base_address = 0;
+
+		/* PCI Config Space Index (0=not supported, 1=supported) */
+		if (subsystem_deviceid & 0x0020)
+			ctrl->pci_config_space = 1;
+		else
+			ctrl->pci_config_space = 0;
+
+		/* PCI-X support */
+		if (subsystem_deviceid & 0x0080) {
+			ctrl->pcix_support = 1;
+			if (subsystem_deviceid & 0x0040)
+				/* 133MHz PCI-X if bit 7 is 1 */
+				ctrl->pcix_speed_capability = 1;
+			else
+				/* 100MHz PCI-X if bit 7 is 1 and bit 0 is 0, */
+				/* 66MHz PCI-X if bit 7 is 1 and bit 0 is 1 */
+				ctrl->pcix_speed_capability = 0;
+		} else {
+			/* Conventional PCI */
+			ctrl->pcix_support = 0;
+			ctrl->pcix_speed_capability = 0;
+		}
+		break;
 
-	} else {
+	default:
 		err(msg_HPC_not_supported);
-		return -ENODEV;
+		rc = -ENODEV;
+		goto err_free_ctrl;
 	}
 
-	// Tell the user that we found one.
+	/* Tell the user that we found one. */
 	info("Initializing the PCI hot plug controller residing on PCI bus %d\n",
 					pdev->bus->number);
 
@@ -1087,7 +1119,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc) {
 		goto err_free_bus;
 	}
-	
+
 	dbg("pdev = %p\n", pdev);
 	dbg("pci resource start %llx\n", (unsigned long long)pci_resource_start(pdev, 0));
 	dbg("pci resource len %llx\n", (unsigned long long)pci_resource_len(pdev, 0));
@@ -1109,7 +1141,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_free_mem_region;
 	}
 
-	// Check for 66Mhz operation
+	/* Check for 66Mhz operation */
 	ctrl->speed = get_controller_speed(ctrl);
 
 
@@ -1120,7 +1152,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 *
 	 ********************************************************/
 
-	// find the physical slot number of the first hot plug slot
+	/* find the physical slot number of the first hot plug slot */
 
 	/* Get slot won't work for devices behind bridges, but
 	 * in this case it will always be called for the "base"
@@ -1137,7 +1169,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_iounmap;
 	}
 
-	// Store PCI Config Space for all devices on this bus
+	/* Store PCI Config Space for all devices on this bus */
 	rc = cpqhp_save_config(ctrl, ctrl->bus, readb(ctrl->hpc_reg + SLOT_MASK));
 	if (rc) {
 		err("%s: unable to save PCI configuration data, error %d\n",
@@ -1148,7 +1180,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	/*
 	 * Get IO, memory, and IRQ resources for new devices
 	 */
-	// The next line is required for cpqhp_find_available_resources
+	/* The next line is required for cpqhp_find_available_resources */
 	ctrl->interrupt = pdev->irq;
 	if (ctrl->interrupt < 0x10) {
 		cpqhp_legacy_mode = 1;
@@ -1182,7 +1214,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			__func__, rc);
 		goto err_iounmap;
 	}
-	
+
 	/* Mask all general input interrupts */
 	writel(0xFFFFFFFFL, ctrl->hpc_reg + INT_MASK);
 
@@ -1196,12 +1228,14 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_iounmap;
 	}
 
-	/* Enable Shift Out interrupt and clear it, also enable SERR on power fault */
+	/* Enable Shift Out interrupt and clear it, also enable SERR on power
+	 * fault
+	 */
 	temp_word = readw(ctrl->hpc_reg + MISC);
 	temp_word |= 0x4006;
 	writew(temp_word, ctrl->hpc_reg + MISC);
 
-	// Changed 05/05/97 to clear all interrupts at start
+	/* Changed 05/05/97 to clear all interrupts at start */
 	writel(0xFFFFFFFFL, ctrl->hpc_reg + INT_INPUT_CLEAR);
 
 	ctrl->ctrl_int_comp = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
@@ -1216,13 +1250,14 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		cpqhp_ctrl_list = ctrl;
 	}
 
-	// turn off empty slots here unless command line option "ON" set
-	// Wait for exclusive access to hardware
+	/* turn off empty slots here unless command line option "ON" set
+	 * Wait for exclusive access to hardware
+	 */
 	mutex_lock(&ctrl->crit_sect);
 
 	num_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F;
 
-	// find first device number for the ctrl
+	/* find first device number for the ctrl */
 	device = readb(ctrl->hpc_reg + SLOT_MASK) >> 4;
 
 	while (num_of_slots) {
@@ -1234,23 +1269,21 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		hp_slot = func->device - ctrl->slot_device_offset;
 		dbg("hp_slot: %d\n", hp_slot);
 
-		// We have to save the presence info for these slots
+		/* We have to save the presence info for these slots */
 		temp_word = ctrl->ctrl_int_comp >> 16;
 		func->presence_save = (temp_word >> hp_slot) & 0x01;
 		func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02;
 
-		if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) {
+		if (ctrl->ctrl_int_comp & (0x1L << hp_slot))
 			func->switch_save = 0;
-		} else {
+		else
 			func->switch_save = 0x10;
-		}
 
-		if (!power_mode) {
+		if (!power_mode)
 			if (!func->is_a_board) {
 				green_LED_off(ctrl, hp_slot);
 				slot_disable(ctrl, hp_slot);
 			}
-		}
 
 		device++;
 		num_of_slots--;
@@ -1258,7 +1291,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	if (!power_mode) {
 		set_SOGO(ctrl);
-		// Wait for SOBS to be unset
+		/* Wait for SOBS to be unset */
 		wait_for_ctrl_irq(ctrl);
 	}
 
@@ -1269,7 +1302,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_free_irq;
 	}
 
-	// Done with exclusive hardware access
+	/* Done with exclusive hardware access */
 	mutex_unlock(&ctrl->crit_sect);
 
 	cpqhp_create_debugfs_files(ctrl);
@@ -1291,77 +1324,6 @@ err_disable_device:
 	return rc;
 }
 
-
-static int one_time_init(void)
-{
-	int loop;
-	int retval = 0;
-
-	if (initialized)
-		return 0;
-
-	power_mode = 0;
-
-	retval = pci_print_IRQ_route();
-	if (retval)
-		goto error;
-
-	dbg("Initialize + Start the notification mechanism \n");
-
-	retval = cpqhp_event_start_thread();
-	if (retval)
-		goto error;
-
-	dbg("Initialize slot lists\n");
-	for (loop = 0; loop < 256; loop++) {
-		cpqhp_slot_list[loop] = NULL;
-	}
-
-	// FIXME: We also need to hook the NMI handler eventually.
-	// this also needs to be worked with Christoph
-	// register_NMI_handler();
-
-	// Map rom address
-	cpqhp_rom_start = ioremap(ROM_PHY_ADDR, ROM_PHY_LEN);
-	if (!cpqhp_rom_start) {
-		err ("Could not ioremap memory region for ROM\n");
-		retval = -EIO;
-		goto error;
-	}
-	
-	/* Now, map the int15 entry point if we are on compaq specific hardware */
-	compaq_nvram_init(cpqhp_rom_start);
-	
-	/* Map smbios table entry point structure */
-	smbios_table = detect_SMBIOS_pointer(cpqhp_rom_start,
-					cpqhp_rom_start + ROM_PHY_LEN);
-	if (!smbios_table) {
-		err ("Could not find the SMBIOS pointer in memory\n");
-		retval = -EIO;
-		goto error_rom_start;
-	}
-
-	smbios_start = ioremap(readl(smbios_table + ST_ADDRESS),
-					readw(smbios_table + ST_LENGTH));
-	if (!smbios_start) {
-		err ("Could not ioremap memory region taken from SMBIOS values\n");
-		retval = -EIO;
-		goto error_smbios_start;
-	}
-
-	initialized = 1;
-
-	return retval;
-
-error_smbios_start:
-	iounmap(smbios_start);
-error_rom_start:
-	iounmap(cpqhp_rom_start);
-error:
-	return retval;
-}
-
-
 static void __exit unload_cpqphpd(void)
 {
 	struct pci_func *next;
@@ -1381,10 +1343,10 @@ static void __exit unload_cpqphpd(void)
 		if (ctrl->hpc_reg) {
 			u16 misc;
 			rc = read_slot_enable (ctrl);
-			
+
 			writeb(0, ctrl->hpc_reg + SLOT_SERR);
 			writel(0xFFFFFFC0L | ~rc, ctrl->hpc_reg + INT_MASK);
-			
+
 			misc = readw(ctrl->hpc_reg + MISC);
 			misc &= 0xFFFD;
 			writew(misc, ctrl->hpc_reg + MISC);
@@ -1464,38 +1426,34 @@ static void __exit unload_cpqphpd(void)
 		}
 	}
 
-	// Stop the notification mechanism
+	/* Stop the notification mechanism */
 	if (initialized)
 		cpqhp_event_stop_thread();
 
-	//unmap the rom address
+	/* unmap the rom address */
 	if (cpqhp_rom_start)
 		iounmap(cpqhp_rom_start);
 	if (smbios_start)
 		iounmap(smbios_start);
 }
 
-
-
 static struct pci_device_id hpcd_pci_tbl[] = {
 	{
 	/* handle any PCI Hotplug controller */
 	.class =        ((PCI_CLASS_SYSTEM_PCI_HOTPLUG << 8) | 0x00),
 	.class_mask =   ~0,
-	
+
 	/* no matter who makes it */
 	.vendor =       PCI_ANY_ID,
 	.device =       PCI_ANY_ID,
 	.subvendor =    PCI_ANY_ID,
 	.subdevice =    PCI_ANY_ID,
-	
+
 	}, { /* end: all zeroes */ }
 };
 
 MODULE_DEVICE_TABLE(pci, hpcd_pci_tbl);
 
-
-
 static struct pci_driver cpqhpc_driver = {
 	.name =		"compaq_pci_hotplug",
 	.id_table =	hpcd_pci_tbl,
@@ -1503,8 +1461,6 @@ static struct pci_driver cpqhpc_driver = {
 	/* remove:	cpqhpc_remove_one, */
 };
 
-
-
 static int __init cpqhpc_init(void)
 {
 	int result;
@@ -1518,7 +1474,6 @@ static int __init cpqhpc_init(void)
 	return result;
 }
 
-
 static void __exit cpqhpc_cleanup(void)
 {
 	dbg("unload_cpqphpd()\n");
@@ -1529,8 +1484,5 @@ static void __exit cpqhpc_cleanup(void)
 	cpqhp_shutdown_debugfs();
 }
 
-
 module_init(cpqhpc_init);
 module_exit(cpqhpc_cleanup);
-
-
diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c
index cc227a8c4b1..2fa47af992a 100644
--- a/drivers/pci/hotplug/cpqphp_ctrl.c
+++ b/drivers/pci/hotplug/cpqphp_ctrl.c
@@ -81,14 +81,15 @@ static u8 handle_switch_change(u8 change, struct controller * ctrl)
 
 	for (hp_slot = 0; hp_slot < 6; hp_slot++) {
 		if (change & (0x1L << hp_slot)) {
-			/**********************************
+			/*
 			 * this one changed.
-			 **********************************/
+			 */
 			func = cpqhp_slot_find(ctrl->bus,
 				(hp_slot + ctrl->slot_device_offset), 0);
 
 			/* this is the structure that tells the worker thread
-			 *what to do */
+			 * what to do
+			 */
 			taskInfo = &(ctrl->event_queue[ctrl->next_event]);
 			ctrl->next_event = (ctrl->next_event + 1) % 10;
 			taskInfo->hp_slot = hp_slot;
@@ -100,17 +101,17 @@ static u8 handle_switch_change(u8 change, struct controller * ctrl)
 			func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02;
 
 			if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) {
-				/**********************************
+				/*
 				 * Switch opened
-				 **********************************/
+				 */
 
 				func->switch_save = 0;
 
 				taskInfo->event_type = INT_SWITCH_OPEN;
 			} else {
-				/**********************************
+				/*
 				 * Switch closed
-				 **********************************/
+				 */
 
 				func->switch_save = 0x10;
 
@@ -131,9 +132,8 @@ static struct slot *cpqhp_find_slot(struct controller *ctrl, u8 device)
 {
 	struct slot *slot = ctrl->slot;
 
-	while (slot && (slot->device != device)) {
+	while (slot && (slot->device != device))
 		slot = slot->next;
-	}
 
 	return slot;
 }
@@ -152,17 +152,17 @@ static u8 handle_presence_change(u16 change, struct controller * ctrl)
 	if (!change)
 		return 0;
 
-	/**********************************
+	/*
 	 * Presence Change
-	 **********************************/
+	 */
 	dbg("cpqsbd:  Presence/Notify input change.\n");
 	dbg("         Changed bits are 0x%4.4x\n", change );
 
 	for (hp_slot = 0; hp_slot < 6; hp_slot++) {
 		if (change & (0x0101 << hp_slot)) {
-			/**********************************
+			/*
 			 * this one changed.
-			 **********************************/
+			 */
 			func = cpqhp_slot_find(ctrl->bus,
 				(hp_slot + ctrl->slot_device_offset), 0);
 
@@ -177,22 +177,23 @@ static u8 handle_presence_change(u16 change, struct controller * ctrl)
 				return 0;
 
 			/* If the switch closed, must be a button
-			 * If not in button mode, nevermind */
+			 * If not in button mode, nevermind
+			 */
 			if (func->switch_save && (ctrl->push_button == 1)) {
 				temp_word = ctrl->ctrl_int_comp >> 16;
 				temp_byte = (temp_word >> hp_slot) & 0x01;
 				temp_byte |= (temp_word >> (hp_slot + 7)) & 0x02;
 
 				if (temp_byte != func->presence_save) {
-					/**************************************
+					/*
 					 * button Pressed (doesn't do anything)
-					 **************************************/
+					 */
 					dbg("hp_slot %d button pressed\n", hp_slot);
 					taskInfo->event_type = INT_BUTTON_PRESS;
 				} else {
-					/**********************************
+					/*
 					 * button Released - TAKE ACTION!!!!
-					 **********************************/
+					 */
 					dbg("hp_slot %d button released\n", hp_slot);
 					taskInfo->event_type = INT_BUTTON_RELEASE;
 
@@ -210,7 +211,8 @@ static u8 handle_presence_change(u16 change, struct controller * ctrl)
 				}
 			} else {
 				/* Switch is open, assume a presence change
-				 * Save the presence state */
+				 * Save the presence state
+				 */
 				temp_word = ctrl->ctrl_int_comp >> 16;
 				func->presence_save = (temp_word >> hp_slot) & 0x01;
 				func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02;
@@ -241,17 +243,17 @@ static u8 handle_power_fault(u8 change, struct controller * ctrl)
 	if (!change)
 		return 0;
 
-	/**********************************
+	/*
 	 * power fault
-	 **********************************/
+	 */
 
 	info("power fault interrupt\n");
 
 	for (hp_slot = 0; hp_slot < 6; hp_slot++) {
 		if (change & (0x01 << hp_slot)) {
-			/**********************************
+			/*
 			 * this one changed.
-			 **********************************/
+			 */
 			func = cpqhp_slot_find(ctrl->bus,
 				(hp_slot + ctrl->slot_device_offset), 0);
 
@@ -262,16 +264,16 @@ static u8 handle_power_fault(u8 change, struct controller * ctrl)
 			rc++;
 
 			if (ctrl->ctrl_int_comp & (0x00000100 << hp_slot)) {
-				/**********************************
+				/*
 				 * power fault Cleared
-				 **********************************/
+				 */
 				func->status = 0x00;
 
 				taskInfo->event_type = INT_POWER_FAULT_CLEAR;
 			} else {
-				/**********************************
+				/*
 				 * power fault
-				 **********************************/
+				 */
 				taskInfo->event_type = INT_POWER_FAULT;
 
 				if (ctrl->rev < 4) {
@@ -432,13 +434,15 @@ static struct pci_resource *do_pre_bridge_resource_split(struct pci_resource **h
 
 
 	/* If we got here, there the bridge requires some of the resource, but
-	 * we may be able to split some off of the front */
+	 * we may be able to split some off of the front
+	 */
 
 	node = *head;
 
 	if (node->length & (alignment -1)) {
 		/* this one isn't an aligned length, so we'll make a new entry
-		 * and split it up. */
+		 * and split it up.
+		 */
 		split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
 
 		if (!split_node)
@@ -544,10 +548,10 @@ static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size
 	if (!(*head))
 		return NULL;
 
-	if ( cpqhp_resource_sort_and_combine(head) )
+	if (cpqhp_resource_sort_and_combine(head))
 		return NULL;
 
-	if ( sort_by_size(head) )
+	if (sort_by_size(head))
 		return NULL;
 
 	for (node = *head; node; node = node->next) {
@@ -556,7 +560,8 @@ static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size
 
 		if (node->base & (size - 1)) {
 			/* this one isn't base aligned properly
-			 * so we'll make a new entry and split it up */
+			 * so we'll make a new entry and split it up
+			 */
 			temp_dword = (node->base | (size-1)) + 1;
 
 			/* Short circuit if adjusted size is too small */
@@ -581,7 +586,8 @@ static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size
 		/* Don't need to check if too small since we already did */
 		if (node->length > size) {
 			/* this one is longer than we need
-			 * so we'll make a new entry and split it up */
+			 * so we'll make a new entry and split it up
+			 */
 			split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
 
 			if (!split_node)
@@ -601,7 +607,8 @@ static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size
 			continue;
 
 		/* If we got here, then it is the right size
-		 * Now take it out of the list and break */
+		 * Now take it out of the list and break
+		 */
 		if (*head == node) {
 			*head = node->next;
 		} else {
@@ -642,14 +649,16 @@ static struct pci_resource *get_max_resource(struct pci_resource **head, u32 siz
 		return NULL;
 
 	for (max = *head; max; max = max->next) {
-		/* If not big enough we could probably just bail, 
-		 * instead we'll continue to the next. */
+		/* If not big enough we could probably just bail,
+		 * instead we'll continue to the next.
+		 */
 		if (max->length < size)
 			continue;
 
 		if (max->base & (size - 1)) {
 			/* this one isn't base aligned properly
-			 * so we'll make a new entry and split it up */
+			 * so we'll make a new entry and split it up
+			 */
 			temp_dword = (max->base | (size-1)) + 1;
 
 			/* Short circuit if adjusted size is too small */
@@ -672,7 +681,8 @@ static struct pci_resource *get_max_resource(struct pci_resource **head, u32 siz
 
 		if ((max->base + max->length) & (size - 1)) {
 			/* this one isn't end aligned properly at the top
-			 * so we'll make a new entry and split it up */
+			 * so we'll make a new entry and split it up
+			 */
 			split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
 
 			if (!split_node)
@@ -744,7 +754,8 @@ static struct pci_resource *get_resource(struct pci_resource **head, u32 size)
 		if (node->base & (size - 1)) {
 			dbg("%s: not aligned\n", __func__);
 			/* this one isn't base aligned properly
-			 * so we'll make a new entry and split it up */
+			 * so we'll make a new entry and split it up
+			 */
 			temp_dword = (node->base | (size-1)) + 1;
 
 			/* Short circuit if adjusted size is too small */
@@ -769,7 +780,8 @@ static struct pci_resource *get_resource(struct pci_resource **head, u32 size)
 		if (node->length > size) {
 			dbg("%s: too big\n", __func__);
 			/* this one is longer than we need
-			 * so we'll make a new entry and split it up */
+			 * so we'll make a new entry and split it up
+			 */
 			split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
 
 			if (!split_node)
@@ -886,19 +898,19 @@ irqreturn_t cpqhp_ctrl_intr(int IRQ, void *data)
 	u32 Diff;
 	u32 temp_dword;
 
-	
+
 	misc = readw(ctrl->hpc_reg + MISC);
-	/***************************************
+	/*
 	 * Check to see if it was our interrupt
-	 ***************************************/
+	 */
 	if (!(misc & 0x000C)) {
 		return IRQ_NONE;
 	}
 
 	if (misc & 0x0004) {
-		/**********************************
+		/*
 		 * Serial Output interrupt Pending
-		 **********************************/
+		 */
 
 		/* Clear the interrupt */
 		misc |= 0x0004;
@@ -961,11 +973,8 @@ struct pci_func *cpqhp_slot_create(u8 busnumber)
 	struct pci_func *next;
 
 	new_slot = kzalloc(sizeof(*new_slot), GFP_KERNEL);
-	if (new_slot == NULL) {
-		/* I'm not dead yet!
-		 * You will be. */
+	if (new_slot == NULL)
 		return new_slot;
-	}
 
 	new_slot->next = NULL;
 	new_slot->configured = 1;
@@ -996,10 +1005,8 @@ static int slot_remove(struct pci_func * old_slot)
 		return 1;
 
 	next = cpqhp_slot_list[old_slot->bus];
-
-	if (next == NULL) {
+	if (next == NULL)
 		return 1;
-	}
 
 	if (next == old_slot) {
 		cpqhp_slot_list[old_slot->bus] = old_slot->next;
@@ -1008,9 +1015,8 @@ static int slot_remove(struct pci_func * old_slot)
 		return 0;
 	}
 
-	while ((next->next != old_slot) && (next->next != NULL)) {
+	while ((next->next != old_slot) && (next->next != NULL))
 		next = next->next;
-	}
 
 	if (next->next == old_slot) {
 		next->next = old_slot->next;
@@ -1040,9 +1046,8 @@ static int bridge_slot_remove(struct pci_func *bridge)
 	for (tempBus = secondaryBus; tempBus <= subordinateBus; tempBus++) {
 		next = cpqhp_slot_list[tempBus];
 
-		while (!slot_remove(next)) {
+		while (!slot_remove(next))
 			next = cpqhp_slot_list[tempBus];
-		}
 	}
 
 	next = cpqhp_slot_list[bridge->bus];
@@ -1130,39 +1135,43 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
 	u8 slot_power = readb(ctrl->hpc_reg + SLOT_POWER);
 	u16 reg16;
 	u32 leds = readl(ctrl->hpc_reg + LED_CONTROL);
-	
+
 	if (ctrl->speed == adapter_speed)
 		return 0;
-	
+
 	/* We don't allow freq/mode changes if we find another adapter running
-	 * in another slot on this controller */
+	 * in another slot on this controller
+	 */
 	for(slot = ctrl->slot; slot; slot = slot->next) {
-		if (slot->device == (hp_slot + ctrl->slot_device_offset)) 
+		if (slot->device == (hp_slot + ctrl->slot_device_offset))
 			continue;
 		if (!slot->hotplug_slot || !slot->hotplug_slot->info)
 			continue;
-		if (slot->hotplug_slot->info->adapter_status == 0) 
+		if (slot->hotplug_slot->info->adapter_status == 0)
 			continue;
 		/* If another adapter is running on the same segment but at a
 		 * lower speed/mode, we allow the new adapter to function at
-		 * this rate if supported */
-		if (ctrl->speed < adapter_speed) 
+		 * this rate if supported
+		 */
+		if (ctrl->speed < adapter_speed)
 			return 0;
 
 		return 1;
 	}
-	
+
 	/* If the controller doesn't support freq/mode changes and the
-	 * controller is running at a higher mode, we bail */
+	 * controller is running at a higher mode, we bail
+	 */
 	if ((ctrl->speed > adapter_speed) && (!ctrl->pcix_speed_capability))
 		return 1;
-	
+
 	/* But we allow the adapter to run at a lower rate if possible */
 	if ((ctrl->speed < adapter_speed) && (!ctrl->pcix_speed_capability))
 		return 0;
 
 	/* We try to set the max speed supported by both the adapter and
-	 * controller */
+	 * controller
+	 */
 	if (ctrl->speed_capability < adapter_speed) {
 		if (ctrl->speed == ctrl->speed_capability)
 			return 0;
@@ -1171,22 +1180,22 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
 
 	writel(0x0L, ctrl->hpc_reg + LED_CONTROL);
 	writeb(0x00, ctrl->hpc_reg + SLOT_ENABLE);
-	
-	set_SOGO(ctrl); 
+
+	set_SOGO(ctrl);
 	wait_for_ctrl_irq(ctrl);
-	
+
 	if (adapter_speed != PCI_SPEED_133MHz_PCIX)
 		reg = 0xF5;
 	else
-		reg = 0xF4;	
+		reg = 0xF4;
 	pci_write_config_byte(ctrl->pci_dev, 0x41, reg);
-	
+
 	reg16 = readw(ctrl->hpc_reg + NEXT_CURR_FREQ);
 	reg16 &= ~0x000F;
 	switch(adapter_speed) {
-		case(PCI_SPEED_133MHz_PCIX): 
+		case(PCI_SPEED_133MHz_PCIX):
 			reg = 0x75;
-			reg16 |= 0xB; 
+			reg16 |= 0xB;
 			break;
 		case(PCI_SPEED_100MHz_PCIX):
 			reg = 0x74;
@@ -1203,48 +1212,48 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
 		default: /* 33MHz PCI 2.2 */
 			reg = 0x71;
 			break;
-			
+
 	}
 	reg16 |= 0xB << 12;
 	writew(reg16, ctrl->hpc_reg + NEXT_CURR_FREQ);
-	
-	mdelay(5); 
-	
+
+	mdelay(5);
+
 	/* Reenable interrupts */
 	writel(0, ctrl->hpc_reg + INT_MASK);
 
-	pci_write_config_byte(ctrl->pci_dev, 0x41, reg); 
-	
+	pci_write_config_byte(ctrl->pci_dev, 0x41, reg);
+
 	/* Restart state machine */
 	reg = ~0xF;
 	pci_read_config_byte(ctrl->pci_dev, 0x43, &reg);
 	pci_write_config_byte(ctrl->pci_dev, 0x43, reg);
-	
+
 	/* Only if mode change...*/
 	if (((ctrl->speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) ||
 		((ctrl->speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz))) 
 			set_SOGO(ctrl);
-	
+
 	wait_for_ctrl_irq(ctrl);
 	mdelay(1100);
-	
+
 	/* Restore LED/Slot state */
 	writel(leds, ctrl->hpc_reg + LED_CONTROL);
 	writeb(slot_power, ctrl->hpc_reg + SLOT_ENABLE);
-	
+
 	set_SOGO(ctrl);
 	wait_for_ctrl_irq(ctrl);
 
 	ctrl->speed = adapter_speed;
 	slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
 
-	info("Successfully changed frequency/mode for adapter in slot %d\n", 
+	info("Successfully changed frequency/mode for adapter in slot %d\n",
 			slot->number);
 	return 0;
 }
 
-/* the following routines constitute the bulk of the 
-   hotplug controller logic
+/* the following routines constitute the bulk of the
+ * hotplug controller logic
  */
 
 
@@ -1268,17 +1277,17 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
 
 	hp_slot = func->device - ctrl->slot_device_offset;
 
-	if (readl(ctrl->hpc_reg + INT_INPUT_CLEAR) & (0x01L << hp_slot)) {
-		/**********************************
-		 * The switch is open.
-		 **********************************/
+	/*
+	 * The switch is open.
+	 */
+	if (readl(ctrl->hpc_reg + INT_INPUT_CLEAR) & (0x01L << hp_slot))
 		rc = INTERLOCK_OPEN;
-	} else if (is_slot_enabled (ctrl, hp_slot)) {
-		/**********************************
-		 * The board is already on
-		 **********************************/
+	/*
+	 * The board is already on
+	 */
+	else if (is_slot_enabled (ctrl, hp_slot))
 		rc = CARD_FUNCTIONING;
-	} else {
+	else {
 		mutex_lock(&ctrl->crit_sect);
 
 		/* turn on board without attaching to the bus */
@@ -1299,7 +1308,7 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
 
 		/* Wait for SOBS to be unset */
 		wait_for_ctrl_irq (ctrl);
-		
+
 		adapter_speed = get_adapter_speed(ctrl, hp_slot);
 		if (ctrl->speed != adapter_speed)
 			if (set_controller_speed(ctrl, adapter_speed, hp_slot))
@@ -1352,7 +1361,8 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
 			 * Get slot won't work for devices behind
 			 * bridges, but in this case it will always be
 			 * called for the "base" bus/dev/func of an
-			 * adapter. */
+			 * adapter.
+			 */
 
 			mutex_lock(&ctrl->crit_sect);
 
@@ -1377,7 +1387,8 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
 
 			 * Get slot won't work for devices behind bridges, but
 			 * in this case it will always be called for the "base"
-			 * bus/dev/func of an adapter. */
+			 * bus/dev/func of an adapter.
+			 */
 
 			mutex_lock(&ctrl->crit_sect);
 
@@ -1434,7 +1445,8 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl)
 	wait_for_ctrl_irq (ctrl);
 
 	/* Change bits in slot power register to force another shift out
-	 * NOTE: this is to work around the timer bug */
+	 * NOTE: this is to work around the timer bug
+	 */
 	temp_byte = readb(ctrl->hpc_reg + SLOT_POWER);
 	writeb(0x00, ctrl->hpc_reg + SLOT_POWER);
 	writeb(temp_byte, ctrl->hpc_reg + SLOT_POWER);
@@ -1443,12 +1455,12 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl)
 
 	/* Wait for SOBS to be unset */
 	wait_for_ctrl_irq (ctrl);
-	
+
 	adapter_speed = get_adapter_speed(ctrl, hp_slot);
 	if (ctrl->speed != adapter_speed)
 		if (set_controller_speed(ctrl, adapter_speed, hp_slot))
 			rc = WRONG_BUS_FREQUENCY;
-	
+
 	/* turn off board without attaching to the bus */
 	disable_slot_power (ctrl, hp_slot);
 
@@ -1461,7 +1473,7 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl)
 
 	if (rc)
 		return rc;
-	
+
 	p_slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
 
 	/* turn on board and blink green LED */
@@ -1521,7 +1533,7 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl)
 	}
 
 	/* All F's is an empty slot or an invalid board */
-	if (temp_register != 0xFFFFFFFF) {	  /* Check for a board in the slot */
+	if (temp_register != 0xFFFFFFFF) {
 		res_lists.io_head = ctrl->io_head;
 		res_lists.mem_head = ctrl->mem_head;
 		res_lists.p_mem_head = ctrl->p_mem_head;
@@ -1570,9 +1582,8 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl)
 		index = 0;
 		do {
 			new_slot = cpqhp_slot_find(ctrl->bus, func->device, index++);
-			if (new_slot && !new_slot->pci_dev) {
+			if (new_slot && !new_slot->pci_dev)
 				cpqhp_configure_device(ctrl, new_slot);
-			}
 		} while (new_slot);
 
 		mutex_lock(&ctrl->crit_sect);
@@ -1859,12 +1870,12 @@ static void interrupt_event_handler(struct controller *ctrl)
 						info(msg_button_on, p_slot->number);
 					}
 					mutex_lock(&ctrl->crit_sect);
-					
+
 					dbg("blink green LED and turn off amber\n");
-					
+
 					amber_LED_off (ctrl, hp_slot);
 					green_LED_blink (ctrl, hp_slot);
-					
+
 					set_SOGO(ctrl);
 
 					/* Wait for SOBS to be unset */
@@ -1958,7 +1969,7 @@ void cpqhp_pushbutton_thread(unsigned long slot)
 			if (cpqhp_process_SI(ctrl, func) != 0) {
 				amber_LED_on(ctrl, hp_slot);
 				green_LED_off(ctrl, hp_slot);
-				
+
 				set_SOGO(ctrl);
 
 				/* Wait for SOBS to be unset */
@@ -2079,7 +2090,7 @@ int cpqhp_process_SS(struct controller *ctrl, struct pci_func *func)
 	struct pci_bus *pci_bus = ctrl->pci_bus;
 	int physical_slot=0;
 
-	device = func->device; 
+	device = func->device;
 	func = cpqhp_slot_find(ctrl->bus, device, index++);
 	p_slot = cpqhp_find_slot(ctrl, device);
 	if (p_slot) {
@@ -2113,9 +2124,8 @@ int cpqhp_process_SS(struct controller *ctrl, struct pci_func *func)
 
 				/* If the VGA Enable bit is set, remove isn't
 				 * supported */
-				if (BCR & PCI_BRIDGE_CTL_VGA) {
+				if (BCR & PCI_BRIDGE_CTL_VGA)
 					rc = REMOVE_NOT_SUPPORTED;
-				}
 			}
 		}
 
@@ -2183,67 +2193,67 @@ int cpqhp_hardware_test(struct controller *ctrl, int test_num)
 	num_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0f;
 
 	switch (test_num) {
-		case 1:
-			/* Do stuff here! */
-
-			/* Do that funky LED thing */
-			/* so we can restore them later */
-			save_LED = readl(ctrl->hpc_reg + LED_CONTROL);
-			work_LED = 0x01010101;
-			switch_leds(ctrl, num_of_slots, &work_LED, 0);
-			switch_leds(ctrl, num_of_slots, &work_LED, 1);
-			switch_leds(ctrl, num_of_slots, &work_LED, 0);
-			switch_leds(ctrl, num_of_slots, &work_LED, 1);
-
-			work_LED = 0x01010000;
-			writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
-			switch_leds(ctrl, num_of_slots, &work_LED, 0);
-			switch_leds(ctrl, num_of_slots, &work_LED, 1);
-			work_LED = 0x00000101;
-			writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
-			switch_leds(ctrl, num_of_slots, &work_LED, 0);
-			switch_leds(ctrl, num_of_slots, &work_LED, 1);
+	case 1:
+		/* Do stuff here! */
+
+		/* Do that funky LED thing */
+		/* so we can restore them later */
+		save_LED = readl(ctrl->hpc_reg + LED_CONTROL);
+		work_LED = 0x01010101;
+		switch_leds(ctrl, num_of_slots, &work_LED, 0);
+		switch_leds(ctrl, num_of_slots, &work_LED, 1);
+		switch_leds(ctrl, num_of_slots, &work_LED, 0);
+		switch_leds(ctrl, num_of_slots, &work_LED, 1);
+
+		work_LED = 0x01010000;
+		writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
+		switch_leds(ctrl, num_of_slots, &work_LED, 0);
+		switch_leds(ctrl, num_of_slots, &work_LED, 1);
+		work_LED = 0x00000101;
+		writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
+		switch_leds(ctrl, num_of_slots, &work_LED, 0);
+		switch_leds(ctrl, num_of_slots, &work_LED, 1);
+
+		work_LED = 0x01010000;
+		writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
+		for (loop = 0; loop < num_of_slots; loop++) {
+			set_SOGO(ctrl);
 
-			work_LED = 0x01010000;
-			writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
-			for (loop = 0; loop < num_of_slots; loop++) {
-				set_SOGO(ctrl);
+			/* Wait for SOGO interrupt */
+			wait_for_ctrl_irq (ctrl);
 
-				/* Wait for SOGO interrupt */
-				wait_for_ctrl_irq (ctrl);
+			/* Get ready for next iteration */
+			long_delay((3*HZ)/10);
+			work_LED = work_LED >> 16;
+			writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
 
-				/* Get ready for next iteration */
-				long_delay((3*HZ)/10);
-				work_LED = work_LED >> 16;
-				writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
-				
-				set_SOGO(ctrl);
+			set_SOGO(ctrl);
 
-				/* Wait for SOGO interrupt */
-				wait_for_ctrl_irq (ctrl);
+			/* Wait for SOGO interrupt */
+			wait_for_ctrl_irq (ctrl);
 
-				/* Get ready for next iteration */
-				long_delay((3*HZ)/10);
-				work_LED = work_LED << 16;
-				writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
-				work_LED = work_LED << 1;
-				writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
-			}
+			/* Get ready for next iteration */
+			long_delay((3*HZ)/10);
+			work_LED = work_LED << 16;
+			writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
+			work_LED = work_LED << 1;
+			writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
+		}
 
-			/* put it back the way it was */
-			writel(save_LED, ctrl->hpc_reg + LED_CONTROL);
+		/* put it back the way it was */
+		writel(save_LED, ctrl->hpc_reg + LED_CONTROL);
 
-			set_SOGO(ctrl);
+		set_SOGO(ctrl);
 
-			/* Wait for SOBS to be unset */
-			wait_for_ctrl_irq (ctrl);
-			break;
-		case 2:
-			/* Do other stuff here! */
-			break;
-		case 3:
-			/* and more... */
-			break;
+		/* Wait for SOBS to be unset */
+		wait_for_ctrl_irq (ctrl);
+		break;
+	case 2:
+		/* Do other stuff here! */
+		break;
+	case 3:
+		/* and more... */
+		break;
 	}
 	return 0;
 }
@@ -2312,9 +2322,9 @@ static u32 configure_new_device(struct controller * ctrl, struct pci_func * func
 		while ((function < max_functions) && (!stop_it)) {
 			pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(func->device, function), 0x00, &ID);
 
-			if (ID == 0xFFFFFFFF) {	  /* There's nothing there. */
+			if (ID == 0xFFFFFFFF) {
 				function++;
-			} else {  /* There's something there */
+			} else {
 				/* Setup slot structure. */
 				new_slot = cpqhp_slot_create(func->bus);
 
@@ -2339,8 +2349,8 @@ static u32 configure_new_device(struct controller * ctrl, struct pci_func * func
 
 
 /*
-  Configuration logic that involves the hotplug data structures and 
-  their bookkeeping
+ * Configuration logic that involves the hotplug data structures and
+ * their bookkeeping
  */
 
 
@@ -2393,7 +2403,7 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func
 	if (rc)
 		return rc;
 
-	if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* PCI-PCI Bridge */
+	if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
 		/* set Primary bus */
 		dbg("set Primary bus = %d\n", func->bus);
 		rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_PRIMARY_BUS, func->bus);
@@ -2484,7 +2494,8 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func
 		temp_resources.irqs = &irqs;
 
 		/* Make copies of the nodes we are going to pass down so that
-		 * if there is a problem,we can just use these to free resources */
+		 * if there is a problem,we can just use these to free resources
+		 */
 		hold_bus_node = kmalloc(sizeof(*hold_bus_node), GFP_KERNEL);
 		hold_IO_node = kmalloc(sizeof(*hold_IO_node), GFP_KERNEL);
 		hold_mem_node = kmalloc(sizeof(*hold_mem_node), GFP_KERNEL);
@@ -2556,7 +2567,8 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func
 		temp_word = (p_mem_node->base + p_mem_node->length - 1) >> 16;
 		rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word);
 
-		/* Adjust this to compensate for extra adjustment in first loop */
+		/* Adjust this to compensate for extra adjustment in first loop
+		 */
 		irqs.barber_pole--;
 
 		rc = 0;
@@ -2917,27 +2929,26 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func
 		}		/* End of base register loop */
 		if (cpqhp_legacy_mode) {
 			/* Figure out which interrupt pin this function uses */
-			rc = pci_bus_read_config_byte (pci_bus, devfn, 
+			rc = pci_bus_read_config_byte (pci_bus, devfn,
 				PCI_INTERRUPT_PIN, &temp_byte);
 
 			/* If this function needs an interrupt and we are behind
 			 * a bridge and the pin is tied to something that's
 			 * alread mapped, set this one the same */
-			if (temp_byte && resources->irqs && 
-			    (resources->irqs->valid_INT & 
+			if (temp_byte && resources->irqs &&
+			    (resources->irqs->valid_INT &
 			     (0x01 << ((temp_byte + resources->irqs->barber_pole - 1) & 0x03)))) {
 				/* We have to share with something already set up */
-				IRQ = resources->irqs->interrupt[(temp_byte + 
+				IRQ = resources->irqs->interrupt[(temp_byte +
 					resources->irqs->barber_pole - 1) & 0x03];
 			} else {
 				/* Program IRQ based on card type */
 				rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code);
 
-				if (class_code == PCI_BASE_CLASS_STORAGE) {
+				if (class_code == PCI_BASE_CLASS_STORAGE)
 					IRQ = cpqhp_disk_irq;
-				} else {
+				else
 					IRQ = cpqhp_nic_irq;
-				}
 			}
 
 			/* IRQ Line */
diff --git a/drivers/pci/hotplug/cpqphp_nvram.c b/drivers/pci/hotplug/cpqphp_nvram.c
index cb174888002..76ba8a1c774 100644
--- a/drivers/pci/hotplug/cpqphp_nvram.c
+++ b/drivers/pci/hotplug/cpqphp_nvram.c
@@ -94,12 +94,13 @@ static u8 evbuffer[1024];
 
 static void __iomem *compaq_int15_entry_point;
 
-static spinlock_t int15_lock;		/* lock for ordering int15_bios_call() */
+/* lock for ordering int15_bios_call() */
+static spinlock_t int15_lock;
 
 
 /* This is a series of function that deals with
-   setting & getting the hotplug resource table in some environment variable.
-*/
+ * setting & getting the hotplug resource table in some environment variable.
+ */
 
 /*
  * We really shouldn't be doing this unless there is a _very_ good reason to!!!
@@ -113,7 +114,7 @@ static u32 add_byte( u32 **p_buffer, u8 value, u32 *used, u32 *avail)
 
 	if ((*used + 1) > *avail)
 		return(1);
-	
+
 	*((u8*)*p_buffer) = value;
 	tByte = (u8**)p_buffer;
 	(*tByte)++;
@@ -170,10 +171,10 @@ static u32 access_EV (u16 operation, u8 *ev_name, u8 *buffer, u32 *buf_size)
 	unsigned long flags;
 	int op = operation;
 	int ret_val;
-	
+
 	if (!compaq_int15_entry_point)
 		return -ENODEV;
-	
+
 	spin_lock_irqsave(&int15_lock, flags);
 	__asm__ (
 		"xorl   %%ebx,%%ebx\n" \
@@ -187,7 +188,7 @@ static u32 access_EV (u16 operation, u8 *ev_name, u8 *buffer, u32 *buf_size)
 		"D" (buffer), "m" (compaq_int15_entry_point)
 		: "%ebx", "%edx");
 	spin_unlock_irqrestore(&int15_lock, flags);
-	
+
 	return((ret_val & 0xFF00) >> 8);
 }
 
@@ -210,14 +211,16 @@ static int load_HRT (void __iomem *rom_start)
 
 	available = 1024;
 
-	// Now load the EV
+	/* Now load the EV */
 	temp_dword = available;
 
 	rc = access_EV(READ_EV, "CQTHPS", evbuffer, &temp_dword);
 
 	evbuffer_length = temp_dword;
 
-	// We're maintaining the resource lists so write FF to invalidate old info
+	/* We're maintaining the resource lists so write FF to invalidate old
+	 * info
+	 */
 	temp_dword = 1;
 
 	rc = access_EV(WRITE_EV, "CQTHPS", &temp_byte, &temp_dword);
@@ -263,13 +266,13 @@ static u32 store_HRT (void __iomem *rom_start)
 	p_EV_header = (struct ev_hrt_header *) pFill;
 
 	ctrl = cpqhp_ctrl_list;
-	
-	// The revision of this structure
+
+	/* The revision of this structure */
 	rc = add_byte( &pFill, 1 + ctrl->push_flag, &usedbytes, &available);
 	if (rc)
 		return(rc);
 
-	// The number of controllers
+	/* The number of controllers */
 	rc = add_byte( &pFill, 1, &usedbytes, &available);
 	if (rc)
 		return(rc);
@@ -279,27 +282,27 @@ static u32 store_HRT (void __iomem *rom_start)
 
 		numCtrl++;
 
-		// The bus number
+		/* The bus number */
 		rc = add_byte( &pFill, ctrl->bus, &usedbytes, &available);
 		if (rc)
 			return(rc);
 
-		// The device Number
+		/* The device Number */
 		rc = add_byte( &pFill, PCI_SLOT(ctrl->pci_dev->devfn), &usedbytes, &available);
 		if (rc)
 			return(rc);
 
-		// The function Number
+		/* The function Number */
 		rc = add_byte( &pFill, PCI_FUNC(ctrl->pci_dev->devfn), &usedbytes, &available);
 		if (rc)
 			return(rc);
 
-		// Skip the number of available entries
+		/* Skip the number of available entries */
 		rc = add_dword( &pFill, 0, &usedbytes, &available);
 		if (rc)
 			return(rc);
 
-		// Figure out memory Available
+		/* Figure out memory Available */
 
 		resNode = ctrl->mem_head;
 
@@ -308,12 +311,12 @@ static u32 store_HRT (void __iomem *rom_start)
 		while (resNode) {
 			loop ++;
 
-			// base
+			/* base */
 			rc = add_dword( &pFill, resNode->base, &usedbytes, &available);
 			if (rc)
 				return(rc);
 
-			// length
+			/* length */
 			rc = add_dword( &pFill, resNode->length, &usedbytes, &available);
 			if (rc)
 				return(rc);
@@ -321,10 +324,10 @@ static u32 store_HRT (void __iomem *rom_start)
 			resNode = resNode->next;
 		}
 
-		// Fill in the number of entries
+		/* Fill in the number of entries */
 		p_ev_ctrl->mem_avail = loop;
 
-		// Figure out prefetchable memory Available
+		/* Figure out prefetchable memory Available */
 
 		resNode = ctrl->p_mem_head;
 
@@ -333,12 +336,12 @@ static u32 store_HRT (void __iomem *rom_start)
 		while (resNode) {
 			loop ++;
 
-			// base
+			/* base */
 			rc = add_dword( &pFill, resNode->base, &usedbytes, &available);
 			if (rc)
 				return(rc);
 
-			// length
+			/* length */
 			rc = add_dword( &pFill, resNode->length, &usedbytes, &available);
 			if (rc)
 				return(rc);
@@ -346,10 +349,10 @@ static u32 store_HRT (void __iomem *rom_start)
 			resNode = resNode->next;
 		}
 
-		// Fill in the number of entries
+		/* Fill in the number of entries */
 		p_ev_ctrl->p_mem_avail = loop;
 
-		// Figure out IO Available
+		/* Figure out IO Available */
 
 		resNode = ctrl->io_head;
 
@@ -358,12 +361,12 @@ static u32 store_HRT (void __iomem *rom_start)
 		while (resNode) {
 			loop ++;
 
-			// base
+			/* base */
 			rc = add_dword( &pFill, resNode->base, &usedbytes, &available);
 			if (rc)
 				return(rc);
 
-			// length
+			/* length */
 			rc = add_dword( &pFill, resNode->length, &usedbytes, &available);
 			if (rc)
 				return(rc);
@@ -371,10 +374,10 @@ static u32 store_HRT (void __iomem *rom_start)
 			resNode = resNode->next;
 		}
 
-		// Fill in the number of entries
+		/* Fill in the number of entries */
 		p_ev_ctrl->io_avail = loop;
 
-		// Figure out bus Available
+		/* Figure out bus Available */
 
 		resNode = ctrl->bus_head;
 
@@ -383,12 +386,12 @@ static u32 store_HRT (void __iomem *rom_start)
 		while (resNode) {
 			loop ++;
 
-			// base
+			/* base */
 			rc = add_dword( &pFill, resNode->base, &usedbytes, &available);
 			if (rc)
 				return(rc);
 
-			// length
+			/* length */
 			rc = add_dword( &pFill, resNode->length, &usedbytes, &available);
 			if (rc)
 				return(rc);
@@ -396,15 +399,15 @@ static u32 store_HRT (void __iomem *rom_start)
 			resNode = resNode->next;
 		}
 
-		// Fill in the number of entries
+		/* Fill in the number of entries */
 		p_ev_ctrl->bus_avail = loop;
 
 		ctrl = ctrl->next;
 	}
-	
+
 	p_EV_header->num_of_ctrl = numCtrl;
 
-	// Now store the EV
+	/* Now store the EV */
 
 	temp_dword = usedbytes;
 
@@ -449,20 +452,21 @@ int compaq_nvram_load (void __iomem *rom_start, struct controller *ctrl)
 	struct ev_hrt_header *p_EV_header;
 
 	if (!evbuffer_init) {
-		// Read the resource list information in from NVRAM
+		/* Read the resource list information in from NVRAM */
 		if (load_HRT(rom_start))
 			memset (evbuffer, 0, 1024);
 
 		evbuffer_init = 1;
 	}
 
-	// If we saved information in NVRAM, use it now
+	/* If we saved information in NVRAM, use it now */
 	p_EV_header = (struct ev_hrt_header *) evbuffer;
 
-	// The following code is for systems where version 1.0 of this
-	// driver has been loaded, but doesn't support the hardware.
-	// In that case, the driver would incorrectly store something
-	// in NVRAM.
+	/* The following code is for systems where version 1.0 of this
+	 * driver has been loaded, but doesn't support the hardware.
+	 * In that case, the driver would incorrectly store something
+	 * in NVRAM.
+	 */
 	if ((p_EV_header->Version == 2) ||
 	    ((p_EV_header->Version == 1) && !ctrl->push_flag)) {
 		p_byte = &(p_EV_header->next);
@@ -479,7 +483,7 @@ int compaq_nvram_load (void __iomem *rom_start, struct controller *ctrl)
 		function = p_ev_ctrl->function;
 
 		while ((bus != ctrl->bus) ||
-		       (device != PCI_SLOT(ctrl->pci_dev->devfn)) || 
+		       (device != PCI_SLOT(ctrl->pci_dev->devfn)) ||
 		       (function != PCI_FUNC(ctrl->pci_dev->devfn))) {
 			nummem = p_ev_ctrl->mem_avail;
 			numpmem = p_ev_ctrl->p_mem_avail;
@@ -491,7 +495,7 @@ int compaq_nvram_load (void __iomem *rom_start, struct controller *ctrl)
 			if (p_byte > ((u8*)p_EV_header + evbuffer_length))
 				return 2;
 
-			// Skip forward to the next entry
+			/* Skip forward to the next entry */
 			p_byte += (nummem + numpmem + numio + numbus) * 8;
 
 			if (p_byte > ((u8*)p_EV_header + evbuffer_length))
@@ -629,8 +633,9 @@ int compaq_nvram_load (void __iomem *rom_start, struct controller *ctrl)
 			ctrl->bus_head = bus_node;
 		}
 
-		// If all of the following fail, we don't have any resources for
-		// hot plug add
+		/* If all of the following fail, we don't have any resources for
+		 * hot plug add
+		 */
 		rc = 1;
 		rc &= cpqhp_resource_sort_and_combine(&(ctrl->mem_head));
 		rc &= cpqhp_resource_sort_and_combine(&(ctrl->p_mem_head));
@@ -640,14 +645,14 @@ int compaq_nvram_load (void __iomem *rom_start, struct controller *ctrl)
 		if (rc)
 			return(rc);
 	} else {
-		if ((evbuffer[0] != 0) && (!ctrl->push_flag)) 
+		if ((evbuffer[0] != 0) && (!ctrl->push_flag))
 			return 1;
 	}
 
 	return 0;
 }
 
-	
+
 int compaq_nvram_store (void __iomem *rom_start)
 {
 	int rc = 1;
diff --git a/drivers/pci/hotplug/cpqphp_pci.c b/drivers/pci/hotplug/cpqphp_pci.c
index 6c0ed0fcb8e..6173b9a4544 100644
--- a/drivers/pci/hotplug/cpqphp_pci.c
+++ b/drivers/pci/hotplug/cpqphp_pci.c
@@ -37,7 +37,6 @@
 #include "../pci.h"
 #include "cpqphp.h"
 #include "cpqphp_nvram.h"
-#include <asm/pci_x86.h>
 
 
 u8 cpqhp_nic_irq;
@@ -82,14 +81,14 @@ static void __iomem *detect_HRT_floating_pointer(void __iomem *begin, void __iom
 }
 
 
-int cpqhp_configure_device (struct controller* ctrl, struct pci_func* func)  
+int cpqhp_configure_device (struct controller* ctrl, struct pci_func* func)
 {
 	unsigned char bus;
 	struct pci_bus *child;
 	int num;
 
 	if (func->pci_dev == NULL)
-		func->pci_dev = pci_find_slot(func->bus, PCI_DEVFN(func->device, func->function));
+		func->pci_dev = pci_get_bus_and_slot(func->bus,PCI_DEVFN(func->device, func->function));
 
 	/* No pci device, we need to create it then */
 	if (func->pci_dev == NULL) {
@@ -99,7 +98,7 @@ int cpqhp_configure_device (struct controller* ctrl, struct pci_func* func)
 		if (num)
 			pci_bus_add_devices(ctrl->pci_dev->bus);
 
-		func->pci_dev = pci_find_slot(func->bus, PCI_DEVFN(func->device, func->function));
+		func->pci_dev = pci_get_bus_and_slot(func->bus, PCI_DEVFN(func->device, func->function));
 		if (func->pci_dev == NULL) {
 			dbg("ERROR: pci_dev still null\n");
 			return 0;
@@ -112,20 +111,24 @@ int cpqhp_configure_device (struct controller* ctrl, struct pci_func* func)
 		pci_do_scan_bus(child);
 	}
 
+	pci_dev_put(func->pci_dev);
+
 	return 0;
 }
 
 
-int cpqhp_unconfigure_device(struct pci_func* func) 
+int cpqhp_unconfigure_device(struct pci_func* func)
 {
 	int j;
-	
+
 	dbg("%s: bus/dev/func = %x/%x/%x\n", __func__, func->bus, func->device, func->function);
 
 	for (j=0; j<8 ; j++) {
-		struct pci_dev* temp = pci_find_slot(func->bus, PCI_DEVFN(func->device, j));
-		if (temp)
+		struct pci_dev* temp = pci_get_bus_and_slot(func->bus, PCI_DEVFN(func->device, j));
+		if (temp) {
+			pci_dev_put(temp);
 			pci_remove_bus_device(temp);
+		}
 	}
 	return 0;
 }
@@ -178,32 +181,22 @@ int cpqhp_set_irq (u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num)
 		if (!rc)
 			return !rc;
 
-		// set the Edge Level Control Register (ELCR)
+		/* set the Edge Level Control Register (ELCR) */
 		temp_word = inb(0x4d0);
 		temp_word |= inb(0x4d1) << 8;
 
 		temp_word |= 0x01 << irq_num;
 
-		// This should only be for x86 as it sets the Edge Level Control Register
-		outb((u8) (temp_word & 0xFF), 0x4d0);
-		outb((u8) ((temp_word & 0xFF00) >> 8), 0x4d1);
-		rc = 0;
-	}
+		/* This should only be for x86 as it sets the Edge Level
+		 * Control Register
+		 */
+		outb((u8) (temp_word & 0xFF), 0x4d0); outb((u8) ((temp_word &
+		0xFF00) >> 8), 0x4d1); rc = 0; }
 
 	return rc;
 }
 
 
-/*
- * WTF??? This function isn't in the code, yet a function calls it, but the 
- * compiler optimizes it away?  strange.  Here as a placeholder to keep the 
- * compiler happy.
- */
-static int PCI_ScanBusNonBridge (u8 bus, u8 device)
-{
-	return 0;
-}
-
 static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 * dev_num)
 {
 	u16 tdevice;
@@ -213,11 +206,11 @@ static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 * dev
 	ctrl->pci_bus->number = bus_num;
 
 	for (tdevice = 0; tdevice < 0xFF; tdevice++) {
-		//Scan for access first
+		/* Scan for access first */
 		if (PCI_RefinedAccessConfig(ctrl->pci_bus, tdevice, 0x08, &work) == -1)
 			continue;
 		dbg("Looking for nonbridge bus_num %d dev_num %d\n", bus_num, tdevice);
-		//Yep we got one. Not a bridge ?
+		/* Yep we got one. Not a bridge ? */
 		if ((work >> 8) != PCI_TO_PCI_BRIDGE_CLASS) {
 			*dev_num = tdevice;
 			dbg("found it !\n");
@@ -225,16 +218,16 @@ static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 * dev
 		}
 	}
 	for (tdevice = 0; tdevice < 0xFF; tdevice++) {
-		//Scan for access first
+		/* Scan for access first */
 		if (PCI_RefinedAccessConfig(ctrl->pci_bus, tdevice, 0x08, &work) == -1)
 			continue;
 		dbg("Looking for bridge bus_num %d dev_num %d\n", bus_num, tdevice);
-		//Yep we got one. bridge ?
+		/* Yep we got one. bridge ? */
 		if ((work >> 8) == PCI_TO_PCI_BRIDGE_CLASS) {
 			pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(tdevice, 0), PCI_SECONDARY_BUS, &tbus);
+			/* XXX: no recursion, wtf? */
 			dbg("Recurse on bus_num %d tdevice %d\n", tbus, tdevice);
-			if (PCI_ScanBusNonBridge(tbus, tdevice) == 0)
-				return 0;
+			return 0;
 		}
 	}
 
@@ -244,39 +237,23 @@ static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 * dev
 
 static int PCI_GetBusDevHelper(struct controller *ctrl, u8 *bus_num, u8 *dev_num, u8 slot, u8 nobridge)
 {
-	struct irq_routing_table *PCIIRQRoutingInfoLength;
-	long len;
-	long loop;
+	int loop, len;
 	u32 work;
-
 	u8 tbus, tdevice, tslot;
 
-	PCIIRQRoutingInfoLength = pcibios_get_irq_routing_table();
-	if (!PCIIRQRoutingInfoLength)
-		return -1;
-
-	len = (PCIIRQRoutingInfoLength->size -
-	       sizeof(struct irq_routing_table)) / sizeof(struct irq_info);
-	// Make sure I got at least one entry
-	if (len == 0) {
-		kfree(PCIIRQRoutingInfoLength );
-		return -1;
-	}
-
+	len = cpqhp_routing_table_length();
 	for (loop = 0; loop < len; ++loop) {
-		tbus = PCIIRQRoutingInfoLength->slots[loop].bus;
-		tdevice = PCIIRQRoutingInfoLength->slots[loop].devfn;
-		tslot = PCIIRQRoutingInfoLength->slots[loop].slot;
+		tbus = cpqhp_routing_table->slots[loop].bus;
+		tdevice = cpqhp_routing_table->slots[loop].devfn;
+		tslot = cpqhp_routing_table->slots[loop].slot;
 
 		if (tslot == slot) {
 			*bus_num = tbus;
 			*dev_num = tdevice;
 			ctrl->pci_bus->number = tbus;
 			pci_bus_read_config_dword (ctrl->pci_bus, *dev_num, PCI_VENDOR_ID, &work);
-			if (!nobridge || (work == 0xffffffff)) {
-				kfree(PCIIRQRoutingInfoLength );
+			if (!nobridge || (work == 0xffffffff))
 				return 0;
-			}
 
 			dbg("bus_num %d devfn %d\n", *bus_num, *dev_num);
 			pci_bus_read_config_dword (ctrl->pci_bus, *dev_num, PCI_CLASS_REVISION, &work);
@@ -287,28 +264,26 @@ static int PCI_GetBusDevHelper(struct controller *ctrl, u8 *bus_num, u8 *dev_num
 				dbg("Scan bus for Non Bridge: bus %d\n", tbus);
 				if (PCI_ScanBusForNonBridge(ctrl, tbus, dev_num) == 0) {
 					*bus_num = tbus;
-					kfree(PCIIRQRoutingInfoLength );
 					return 0;
 				}
-			} else {
-				kfree(PCIIRQRoutingInfoLength );
+			} else
 				return 0;
-			}
-
 		}
 	}
-	kfree(PCIIRQRoutingInfoLength );
 	return -1;
 }
 
 
 int cpqhp_get_bus_dev (struct controller *ctrl, u8 * bus_num, u8 * dev_num, u8 slot)
 {
-	return PCI_GetBusDevHelper(ctrl, bus_num, dev_num, slot, 0);	//plain (bridges allowed)
+	/* plain (bridges allowed) */
+	return PCI_GetBusDevHelper(ctrl, bus_num, dev_num, slot, 0);
 }
 
 
-/* More PCI configuration routines; this time centered around hotplug controller */
+/* More PCI configuration routines; this time centered around hotplug
+ * controller
+ */
 
 
 /*
@@ -339,12 +314,12 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug)
 	int stop_it;
 	int index;
 
-	//              Decide which slots are supported
+	/* Decide which slots are supported */
 
 	if (is_hot_plug) {
-		//*********************************
-		// is_hot_plug is the slot mask
-		//*********************************
+		/*
+		 * is_hot_plug is the slot mask
+		 */
 		FirstSupported = is_hot_plug >> 4;
 		LastSupported = FirstSupported + (is_hot_plug & 0x0F) - 1;
 	} else {
@@ -352,123 +327,127 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug)
 		LastSupported = 0x1F;
 	}
 
-	//     Save PCI configuration space for all devices in supported slots
+	/* Save PCI configuration space for all devices in supported slots */
 	ctrl->pci_bus->number = busnumber;
 	for (device = FirstSupported; device <= LastSupported; device++) {
 		ID = 0xFFFFFFFF;
-		rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_VENDOR_ID, &ID);
+		rc = pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_VENDOR_ID, &ID);
+
+		if (ID == 0xFFFFFFFF) {
+			if (is_hot_plug) {
+				/* Setup slot structure with entry for empty
+				 * slot
+				 */
+				new_slot = cpqhp_slot_create(busnumber);
+				if (new_slot == NULL)
+					return 1;
 
-		if (ID != 0xFFFFFFFF) {	  //  device in slot
-			rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, 0), 0x0B, &class_code);
-			if (rc)
-				return rc;
+				new_slot->bus = (u8) busnumber;
+				new_slot->device = (u8) device;
+				new_slot->function = 0;
+				new_slot->is_a_board = 0;
+				new_slot->presence_save = 0;
+				new_slot->switch_save = 0;
+			}
+			continue;
+		}
 
-			rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_HEADER_TYPE, &header_type);
-			if (rc)
-				return rc;
+		rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, 0), 0x0B, &class_code);
+		if (rc)
+			return rc;
 
-			// If multi-function device, set max_functions to 8
-			if (header_type & 0x80)
-				max_functions = 8;
-			else
-				max_functions = 1;
+		rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_HEADER_TYPE, &header_type);
+		if (rc)
+			return rc;
 
-			function = 0;
+		/* If multi-function device, set max_functions to 8 */
+		if (header_type & 0x80)
+			max_functions = 8;
+		else
+			max_functions = 1;
 
-			do {
-				DevError = 0;
+		function = 0;
 
-				if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {   // P-P Bridge
-					//  Recurse the subordinate bus
-					//  get the subordinate bus number
-					rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, function), PCI_SECONDARY_BUS, &secondary_bus);
-					if (rc) {
+		do {
+			DevError = 0;
+			if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+				/* Recurse the subordinate bus
+				 * get the subordinate bus number
+				 */
+				rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, function), PCI_SECONDARY_BUS, &secondary_bus);
+				if (rc) {
+					return rc;
+				} else {
+					sub_bus = (int) secondary_bus;
+
+					/* Save secondary bus cfg spc
+					 * with this recursive call.
+					 */
+					rc = cpqhp_save_config(ctrl, sub_bus, 0);
+					if (rc)
 						return rc;
-					} else {
-						sub_bus = (int) secondary_bus;
-
-						// Save secondary bus cfg spc
-						// with this recursive call.
-						rc = cpqhp_save_config(ctrl, sub_bus, 0);
-						if (rc)
-							return rc;
-						ctrl->pci_bus->number = busnumber;
-					}
+					ctrl->pci_bus->number = busnumber;
 				}
+			}
 
-				index = 0;
+			index = 0;
+			new_slot = cpqhp_slot_find(busnumber, device, index++);
+			while (new_slot &&
+			       (new_slot->function != (u8) function))
 				new_slot = cpqhp_slot_find(busnumber, device, index++);
-				while (new_slot && 
-				       (new_slot->function != (u8) function))
-					new_slot = cpqhp_slot_find(busnumber, device, index++);
 
-				if (!new_slot) {
-					// Setup slot structure.
-					new_slot = cpqhp_slot_create(busnumber);
-
-					if (new_slot == NULL)
-						return(1);
-				}
-
-				new_slot->bus = (u8) busnumber;
-				new_slot->device = (u8) device;
-				new_slot->function = (u8) function;
-				new_slot->is_a_board = 1;
-				new_slot->switch_save = 0x10;
-				// In case of unsupported board
-				new_slot->status = DevError;
-				new_slot->pci_dev = pci_find_slot(new_slot->bus, (new_slot->device << 3) | new_slot->function);
-
-				for (cloop = 0; cloop < 0x20; cloop++) {
-					rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(device, function), cloop << 2, (u32 *) & (new_slot-> config_space [cloop]));
-					if (rc)
-						return rc;
-				}
+			if (!new_slot) {
+				/* Setup slot structure. */
+				new_slot = cpqhp_slot_create(busnumber);
+				if (new_slot == NULL)
+					return 1;
+			}
 
-				function++;
+			new_slot->bus = (u8) busnumber;
+			new_slot->device = (u8) device;
+			new_slot->function = (u8) function;
+			new_slot->is_a_board = 1;
+			new_slot->switch_save = 0x10;
+			/* In case of unsupported board */
+			new_slot->status = DevError;
+			new_slot->pci_dev = pci_get_bus_and_slot(new_slot->bus, (new_slot->device << 3) | new_slot->function);
 
-				stop_it = 0;
+			for (cloop = 0; cloop < 0x20; cloop++) {
+				rc = pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(device, function), cloop << 2, (u32 *) & (new_slot-> config_space [cloop]));
+				if (rc)
+					return rc;
+			}
 
-				//  this loop skips to the next present function
-				//  reading in Class Code and Header type.
+			pci_dev_put(new_slot->pci_dev);
 
-				while ((function < max_functions)&&(!stop_it)) {
-					rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(device, function), PCI_VENDOR_ID, &ID);
-					if (ID == 0xFFFFFFFF) {	 // nothing there.
-						function++;
-					} else {  // Something there
-						rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, function), 0x0B, &class_code);
-						if (rc)
-							return rc;
+			function++;
 
-						rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, function), PCI_HEADER_TYPE, &header_type);
-						if (rc)
-							return rc;
+			stop_it = 0;
 
-						stop_it++;
-					}
+			/* this loop skips to the next present function
+			 * reading in Class Code and Header type.
+			 */
+			while ((function < max_functions) && (!stop_it)) {
+				rc = pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(device, function), PCI_VENDOR_ID, &ID);
+				if (ID == 0xFFFFFFFF) {
+					function++;
+					continue;
 				}
+				rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, function), 0x0B, &class_code);
+				if (rc)
+					return rc;
 
-			} while (function < max_functions);
-		}		// End of IF (device in slot?)
-		else if (is_hot_plug) {
-			// Setup slot structure with entry for empty slot
-			new_slot = cpqhp_slot_create(busnumber);
+				rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, function), PCI_HEADER_TYPE, &header_type);
+				if (rc)
+					return rc;
 
-			if (new_slot == NULL) {
-				return(1);
+				stop_it++;
 			}
 
-			new_slot->bus = (u8) busnumber;
-			new_slot->device = (u8) device;
-			new_slot->function = 0;
-			new_slot->is_a_board = 0;
-			new_slot->presence_save = 0;
-			new_slot->switch_save = 0;
-		}
-	}			// End of FOR loop
+		} while (function < max_functions);
+	}			/* End of FOR loop */
 
-	return(0);
+	return 0;
 }
 
 
@@ -489,7 +468,7 @@ int cpqhp_save_slot_config (struct controller *ctrl, struct pci_func * new_slot)
 	u8 secondary_bus;
 	int sub_bus;
 	int max_functions;
-	int function;
+	int function = 0;
 	int cloop = 0;
 	int stop_it;
 
@@ -498,63 +477,58 @@ int cpqhp_save_slot_config (struct controller *ctrl, struct pci_func * new_slot)
 	ctrl->pci_bus->number = new_slot->bus;
 	pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), PCI_VENDOR_ID, &ID);
 
-	if (ID != 0xFFFFFFFF) {	  //  device in slot
-		pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), 0x0B, &class_code);
-		pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), PCI_HEADER_TYPE, &header_type);
-
-		if (header_type & 0x80)	// Multi-function device
-			max_functions = 8;
-		else
-			max_functions = 1;
-
-		function = 0;
-
-		do {
-			if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {	  // PCI-PCI Bridge
-				//  Recurse the subordinate bus
-				pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_SECONDARY_BUS, &secondary_bus);
+	if (ID == 0xFFFFFFFF)
+		return 2;
 
-				sub_bus = (int) secondary_bus;
+	pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), 0x0B, &class_code);
+	pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), PCI_HEADER_TYPE, &header_type);
 
-				// Save the config headers for the secondary bus.
-				rc = cpqhp_save_config(ctrl, sub_bus, 0);
-				if (rc)
-					return(rc);
-				ctrl->pci_bus->number = new_slot->bus;
+	if (header_type & 0x80)	/* Multi-function device */
+		max_functions = 8;
+	else
+		max_functions = 1;
 
-			}	// End of IF
+	while (function < max_functions) {
+		if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+			/*  Recurse the subordinate bus */
+			pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_SECONDARY_BUS, &secondary_bus);
 
-			new_slot->status = 0;
+			sub_bus = (int) secondary_bus;
 
-			for (cloop = 0; cloop < 0x20; cloop++) {
-				pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), cloop << 2, (u32 *) & (new_slot-> config_space [cloop]));
-			}
+			/* Save the config headers for the secondary
+			 * bus.
+			 */
+			rc = cpqhp_save_config(ctrl, sub_bus, 0);
+			if (rc)
+				return(rc);
+			ctrl->pci_bus->number = new_slot->bus;
 
-			function++;
+		}
 
-			stop_it = 0;
+		new_slot->status = 0;
 
-			//  this loop skips to the next present function
-			//  reading in the Class Code and the Header type.
+		for (cloop = 0; cloop < 0x20; cloop++)
+			pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), cloop << 2, (u32 *) & (new_slot-> config_space [cloop]));
 
-			while ((function < max_functions) && (!stop_it)) {
-				pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_VENDOR_ID, &ID);
+		function++;
 
-				if (ID == 0xFFFFFFFF) {	 // nothing there.
-					function++;
-				} else {  // Something there
-					pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), 0x0B, &class_code);
+		stop_it = 0;
 
-					pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_HEADER_TYPE, &header_type);
+		/* this loop skips to the next present function
+		 * reading in the Class Code and the Header type.
+		 */
+		while ((function < max_functions) && (!stop_it)) {
+			pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_VENDOR_ID, &ID);
 
-					stop_it++;
-				}
+			if (ID == 0xFFFFFFFF)
+				function++;
+			else {
+				pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), 0x0B, &class_code);
+				pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_HEADER_TYPE, &header_type);
+				stop_it++;
 			}
+		}
 
-		} while (function < max_functions);
-	}			// End of IF (device in slot?)
-	else {
-		return 2;
 	}
 
 	return 0;
@@ -590,11 +564,10 @@ int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func)
 		pci_bus->number = func->bus;
 		devfn = PCI_DEVFN(func->device, func->function);
 
-		// Check for Bridge
+		/* Check for Bridge */
 		pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
 
 		if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
-			// PCI-PCI Bridge
 			pci_bus_read_config_byte (pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus);
 
 			sub_bus = (int) secondary_bus;
@@ -610,23 +583,27 @@ int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func)
 			}
 			pci_bus->number = func->bus;
 
-			//FIXME: this loop is duplicated in the non-bridge case.  The two could be rolled together
-			// Figure out IO and memory base lengths
+			/* FIXME: this loop is duplicated in the non-bridge
+			 * case.  The two could be rolled together Figure out
+			 * IO and memory base lengths
+			 */
 			for (cloop = 0x10; cloop <= 0x14; cloop += 4) {
 				temp_register = 0xFFFFFFFF;
 				pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register);
 				pci_bus_read_config_dword (pci_bus, devfn, cloop, &base);
-
-				if (base) {  // If this register is implemented
+				/* If this register is implemented */
+				if (base) {
 					if (base & 0x01L) {
-						// IO base
-						// set base = amount of IO space requested
+						/* IO base
+						 * set base = amount of IO space
+						 * requested
+						 */
 						base = base & 0xFFFFFFFE;
 						base = (~base) + 1;
 
 						type = 1;
 					} else {
-						// memory base
+						/* memory base */
 						base = base & 0xFFFFFFF0;
 						base = (~base) + 1;
 
@@ -637,32 +614,36 @@ int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func)
 					type = 0;
 				}
 
-				// Save information in slot structure
+				/* Save information in slot structure */
 				func->base_length[(cloop - 0x10) >> 2] =
 				base;
 				func->base_type[(cloop - 0x10) >> 2] = type;
 
-			}	// End of base register loop
+			}	/* End of base register loop */
 
-
-		} else if ((header_type & 0x7F) == 0x00) {	  // PCI-PCI Bridge
-			// Figure out IO and memory base lengths
+		} else if ((header_type & 0x7F) == 0x00) {
+			/* Figure out IO and memory base lengths */
 			for (cloop = 0x10; cloop <= 0x24; cloop += 4) {
 				temp_register = 0xFFFFFFFF;
 				pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register);
 				pci_bus_read_config_dword (pci_bus, devfn, cloop, &base);
 
-				if (base) {  // If this register is implemented
+				/* If this register is implemented */
+				if (base) {
 					if (base & 0x01L) {
-						// IO base
-						// base = amount of IO space requested
+						/* IO base
+						 * base = amount of IO space
+						 * requested
+						 */
 						base = base & 0xFFFFFFFE;
 						base = (~base) + 1;
 
 						type = 1;
 					} else {
-						// memory base
-						// base = amount of memory space requested
+						/* memory base
+						 * base = amount of memory
+						 * space requested
+						 */
 						base = base & 0xFFFFFFF0;
 						base = (~base) + 1;
 
@@ -673,16 +654,16 @@ int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func)
 					type = 0;
 				}
 
-				// Save information in slot structure
+				/* Save information in slot structure */
 				func->base_length[(cloop - 0x10) >> 2] = base;
 				func->base_type[(cloop - 0x10) >> 2] = type;
 
-			}	// End of base register loop
+			}	/* End of base register loop */
 
-		} else {	  // Some other unknown header type
+		} else {	  /* Some other unknown header type */
 		}
 
-		// find the next device in this slot
+		/* find the next device in this slot */
 		func = cpqhp_slot_find(func->bus, func->device, index++);
 	}
 
@@ -728,18 +709,18 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 		pci_bus->number = func->bus;
 		devfn = PCI_DEVFN(func->device, func->function);
 
-		// Save the command register
+		/* Save the command register */
 		pci_bus_read_config_word(pci_bus, devfn, PCI_COMMAND, &save_command);
 
-		// disable card
+		/* disable card */
 		command = 0x00;
 		pci_bus_write_config_word(pci_bus, devfn, PCI_COMMAND, command);
 
-		// Check for Bridge
+		/* Check for Bridge */
 		pci_bus_read_config_byte(pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
 
-		if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {	  // PCI-PCI Bridge
-			// Clear Bridge Control Register
+		if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+			/* Clear Bridge Control Register */
 			command = 0x00;
 			pci_bus_write_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, command);
 			pci_bus_read_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus);
@@ -755,7 +736,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 			bus_node->next = func->bus_head;
 			func->bus_head = bus_node;
 
-			// Save IO base and Limit registers
+			/* Save IO base and Limit registers */
 			pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_BASE, &b_base);
 			pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_LIMIT, &b_length);
 
@@ -771,7 +752,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 				func->io_head = io_node;
 			}
 
-			// Save memory base and Limit registers
+			/* Save memory base and Limit registers */
 			pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_BASE, &w_base);
 			pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, &w_length);
 
@@ -787,7 +768,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 				func->mem_head = mem_node;
 			}
 
-			// Save prefetchable memory base and Limit registers
+			/* Save prefetchable memory base and Limit registers */
 			pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_BASE, &w_base);
 			pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, &w_length);
 
@@ -802,7 +783,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 				p_mem_node->next = func->p_mem_head;
 				func->p_mem_head = p_mem_node;
 			}
-			// Figure out IO and memory base lengths
+			/* Figure out IO and memory base lengths */
 			for (cloop = 0x10; cloop <= 0x14; cloop += 4) {
 				pci_bus_read_config_dword (pci_bus, devfn, cloop, &save_base);
 
@@ -812,11 +793,14 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 
 				temp_register = base;
 
-				if (base) {  // If this register is implemented
+				/* If this register is implemented */
+				if (base) {
 					if (((base & 0x03L) == 0x01)
 					    && (save_command & 0x01)) {
-						// IO base
-						// set temp_register = amount of IO space requested
+						/* IO base
+						 * set temp_register = amount
+						 * of IO space requested
+						 */
 						temp_register = base & 0xFFFFFFFE;
 						temp_register = (~temp_register) + 1;
 
@@ -834,7 +818,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 					} else
 						if (((base & 0x0BL) == 0x08)
 						    && (save_command & 0x02)) {
-						// prefetchable memory base
+						/* prefetchable memory base */
 						temp_register = base & 0xFFFFFFF0;
 						temp_register = (~temp_register) + 1;
 
@@ -851,7 +835,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 					} else
 						if (((base & 0x0BL) == 0x00)
 						    && (save_command & 0x02)) {
-						// prefetchable memory base
+						/* prefetchable memory base */
 						temp_register = base & 0xFFFFFFF0;
 						temp_register = (~temp_register) + 1;
 
@@ -868,9 +852,10 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 					} else
 						return(1);
 				}
-			}	// End of base register loop
-		} else if ((header_type & 0x7F) == 0x00) {	  // Standard header
-			// Figure out IO and memory base lengths
+			}	/* End of base register loop */
+		/* Standard header */
+		} else if ((header_type & 0x7F) == 0x00) {
+			/* Figure out IO and memory base lengths */
 			for (cloop = 0x10; cloop <= 0x24; cloop += 4) {
 				pci_bus_read_config_dword(pci_bus, devfn, cloop, &save_base);
 
@@ -880,11 +865,14 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 
 				temp_register = base;
 
-				if (base) {	  // If this register is implemented
+				/* If this register is implemented */
+				if (base) {
 					if (((base & 0x03L) == 0x01)
 					    && (save_command & 0x01)) {
-						// IO base
-						// set temp_register = amount of IO space requested
+						/* IO base
+						 * set temp_register = amount
+						 * of IO space requested
+						 */
 						temp_register = base & 0xFFFFFFFE;
 						temp_register = (~temp_register) + 1;
 
@@ -901,7 +889,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 					} else
 						if (((base & 0x0BL) == 0x08)
 						    && (save_command & 0x02)) {
-						// prefetchable memory base
+						/* prefetchable memory base */
 						temp_register = base & 0xFFFFFFF0;
 						temp_register = (~temp_register) + 1;
 
@@ -918,7 +906,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 					} else
 						if (((base & 0x0BL) == 0x00)
 						    && (save_command & 0x02)) {
-						// prefetchable memory base
+						/* prefetchable memory base */
 						temp_register = base & 0xFFFFFFF0;
 						temp_register = (~temp_register) + 1;
 
@@ -935,15 +923,14 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 					} else
 						return(1);
 				}
-			}	// End of base register loop
-		} else {	  // Some other unknown header type
+			}	/* End of base register loop */
 		}
 
-		// find the next device in this slot
+		/* find the next device in this slot */
 		func = cpqhp_slot_find(func->bus, func->device, index++);
 	}
 
-	return(0);
+	return 0;
 }
 
 
@@ -975,16 +962,16 @@ int cpqhp_configure_board(struct controller *ctrl, struct pci_func * func)
 		pci_bus->number = func->bus;
 		devfn = PCI_DEVFN(func->device, func->function);
 
-		// Start at the top of config space so that the control
-		// registers are programmed last
-		for (cloop = 0x3C; cloop > 0; cloop -= 4) {
+		/* Start at the top of config space so that the control
+		 * registers are programmed last
+		 */
+		for (cloop = 0x3C; cloop > 0; cloop -= 4)
 			pci_bus_write_config_dword (pci_bus, devfn, cloop, func->config_space[cloop >> 2]);
-		}
 
 		pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
 
-		// If this is a bridge device, restore subordinate devices
-		if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {	  // PCI-PCI Bridge
+		/* If this is a bridge device, restore subordinate devices */
+		if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
 			pci_bus_read_config_byte (pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus);
 
 			sub_bus = (int) secondary_bus;
@@ -1000,8 +987,9 @@ int cpqhp_configure_board(struct controller *ctrl, struct pci_func * func)
 			}
 		} else {
 
-			// Check all the base Address Registers to make sure
-			// they are the same.  If not, the board is different.
+			/* Check all the base Address Registers to make sure
+			 * they are the same.  If not, the board is different.
+			 */
 
 			for (cloop = 16; cloop < 40; cloop += 4) {
 				pci_bus_read_config_dword (pci_bus, devfn, cloop, &temp);
@@ -1058,27 +1046,28 @@ int cpqhp_valid_replace(struct controller *ctrl, struct pci_func * func)
 
 		pci_bus_read_config_dword (pci_bus, devfn, PCI_VENDOR_ID, &temp_register);
 
-		// No adapter present
+		/* No adapter present */
 		if (temp_register == 0xFFFFFFFF)
 			return(NO_ADAPTER_PRESENT);
 
 		if (temp_register != func->config_space[0])
 			return(ADAPTER_NOT_SAME);
 
-		// Check for same revision number and class code
+		/* Check for same revision number and class code */
 		pci_bus_read_config_dword (pci_bus, devfn, PCI_CLASS_REVISION, &temp_register);
 
-		// Adapter not the same
+		/* Adapter not the same */
 		if (temp_register != func->config_space[0x08 >> 2])
 			return(ADAPTER_NOT_SAME);
 
-		// Check for Bridge
+		/* Check for Bridge */
 		pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
 
-		if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {	  // PCI-PCI Bridge
-			// In order to continue checking, we must program the
-			// bus registers in the bridge to respond to accesses
-			// for it's subordinate bus(es)
+		if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+			/* In order to continue checking, we must program the
+			 * bus registers in the bridge to respond to accesses
+			 * for its subordinate bus(es)
+			 */
 
 			temp_register = func->config_space[0x18 >> 2];
 			pci_bus_write_config_dword (pci_bus, devfn, PCI_PRIMARY_BUS, temp_register);
@@ -1096,35 +1085,39 @@ int cpqhp_valid_replace(struct controller *ctrl, struct pci_func * func)
 			}
 
 		}
-		// Check to see if it is a standard config header
+		/* Check to see if it is a standard config header */
 		else if ((header_type & 0x7F) == PCI_HEADER_TYPE_NORMAL) {
-			// Check subsystem vendor and ID
+			/* Check subsystem vendor and ID */
 			pci_bus_read_config_dword (pci_bus, devfn, PCI_SUBSYSTEM_VENDOR_ID, &temp_register);
 
 			if (temp_register != func->config_space[0x2C >> 2]) {
-				// If it's a SMART-2 and the register isn't filled
-				// in, ignore the difference because
-				// they just have an old rev of the firmware
-
+				/* If it's a SMART-2 and the register isn't
+				 * filled in, ignore the difference because
+				 * they just have an old rev of the firmware
+				 */
 				if (!((func->config_space[0] == 0xAE100E11)
 				      && (temp_register == 0x00L)))
 					return(ADAPTER_NOT_SAME);
 			}
-			// Figure out IO and memory base lengths
+			/* Figure out IO and memory base lengths */
 			for (cloop = 0x10; cloop <= 0x24; cloop += 4) {
 				temp_register = 0xFFFFFFFF;
 				pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register);
 				pci_bus_read_config_dword (pci_bus, devfn, cloop, &base);
-				if (base) {	  // If this register is implemented
+
+				/* If this register is implemented */
+				if (base) {
 					if (base & 0x01L) {
-						// IO base
-						// set base = amount of IO space requested
+						/* IO base
+						 * set base = amount of IO
+						 * space requested
+						 */
 						base = base & 0xFFFFFFFE;
 						base = (~base) + 1;
 
 						type = 1;
 					} else {
-						// memory base
+						/* memory base */
 						base = base & 0xFFFFFFF0;
 						base = (~base) + 1;
 
@@ -1135,23 +1128,24 @@ int cpqhp_valid_replace(struct controller *ctrl, struct pci_func * func)
 					type = 0;
 				}
 
-				// Check information in slot structure
+				/* Check information in slot structure */
 				if (func->base_length[(cloop - 0x10) >> 2] != base)
 					return(ADAPTER_NOT_SAME);
 
 				if (func->base_type[(cloop - 0x10) >> 2] != type)
 					return(ADAPTER_NOT_SAME);
 
-			}	// End of base register loop
+			}	/* End of base register loop */
 
-		}		// End of (type 0 config space) else
+		}		/* End of (type 0 config space) else */
 		else {
-			// this is not a type 0 or 1 config space header so
-			// we don't know how to do it
+			/* this is not a type 0 or 1 config space header so
+			 * we don't know how to do it
+			 */
 			return(DEVICE_TYPE_NOT_SUPPORTED);
 		}
 
-		// Get the next function
+		/* Get the next function */
 		func = cpqhp_slot_find(func->bus, func->device, index++);
 	}
 
@@ -1168,7 +1162,7 @@ int cpqhp_valid_replace(struct controller *ctrl, struct pci_func * func)
  * this function is for hot plug ADD!
  *
  * returns 0 if success
- */  
+ */
 int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_start)
 {
 	u8 temp;
@@ -1187,10 +1181,10 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
 	rom_resource_table = detect_HRT_floating_pointer(rom_start, rom_start+0xffff);
 	dbg("rom_resource_table = %p\n", rom_resource_table);
 
-	if (rom_resource_table == NULL) {
+	if (rom_resource_table == NULL)
 		return -ENODEV;
-	}
-	// Sum all resources and setup resource maps
+
+	/* Sum all resources and setup resource maps */
 	unused_IRQ = readl(rom_resource_table + UNUSED_IRQ);
 	dbg("unused_IRQ = %x\n", unused_IRQ);
 
@@ -1222,13 +1216,11 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
 
 	temp = 0;
 
-	if (!cpqhp_nic_irq) {
+	if (!cpqhp_nic_irq)
 		cpqhp_nic_irq = ctrl->cfgspc_irq;
-	}
 
-	if (!cpqhp_disk_irq) {
+	if (!cpqhp_disk_irq)
 		cpqhp_disk_irq = ctrl->cfgspc_irq;
-	}
 
 	dbg("cpqhp_disk_irq, cpqhp_nic_irq= %d, %d\n", cpqhp_disk_irq, cpqhp_nic_irq);
 
@@ -1262,13 +1254,13 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
 		    dev_func, io_base, io_length, mem_base, mem_length, pre_mem_base, pre_mem_length,
 		    primary_bus, secondary_bus, max_bus);
 
-		// If this entry isn't for our controller's bus, ignore it
+		/* If this entry isn't for our controller's bus, ignore it */
 		if (primary_bus != ctrl->bus) {
 			i--;
 			one_slot += sizeof (struct slot_rt);
 			continue;
 		}
-		// find out if this entry is for an occupied slot
+		/* find out if this entry is for an occupied slot */
 		ctrl->pci_bus->number = primary_bus;
 		pci_bus_read_config_dword (ctrl->pci_bus, dev_func, PCI_VENDOR_ID, &temp_dword);
 		dbg("temp_D_word = %x\n", temp_dword);
@@ -1282,13 +1274,13 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
 				func = cpqhp_slot_find(primary_bus, dev_func >> 3, index++);
 			}
 
-			// If we can't find a match, skip this table entry
+			/* If we can't find a match, skip this table entry */
 			if (!func) {
 				i--;
 				one_slot += sizeof (struct slot_rt);
 				continue;
 			}
-			// this may not work and shouldn't be used
+			/* this may not work and shouldn't be used */
 			if (secondary_bus != primary_bus)
 				bridged_slot = 1;
 			else
@@ -1301,7 +1293,7 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
 		}
 
 
-		// If we've got a valid IO base, use it
+		/* If we've got a valid IO base, use it */
 
 		temp_dword = io_base + io_length;
 
@@ -1325,7 +1317,7 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
 			}
 		}
 
-		// If we've got a valid memory base, use it
+		/* If we've got a valid memory base, use it */
 		temp_dword = mem_base + mem_length;
 		if ((mem_base) && (temp_dword < 0x10000)) {
 			mem_node = kmalloc(sizeof(*mem_node), GFP_KERNEL);
@@ -1348,8 +1340,9 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
 			}
 		}
 
-		// If we've got a valid prefetchable memory base, and
-		// the base + length isn't greater than 0xFFFF
+		/* If we've got a valid prefetchable memory base, and
+		 * the base + length isn't greater than 0xFFFF
+		 */
 		temp_dword = pre_mem_base + pre_mem_length;
 		if ((pre_mem_base) && (temp_dword < 0x10000)) {
 			p_mem_node = kmalloc(sizeof(*p_mem_node), GFP_KERNEL);
@@ -1372,9 +1365,10 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
 			}
 		}
 
-		// If we've got a valid bus number, use it
-		// The second condition is to ignore bus numbers on
-		// populated slots that don't have PCI-PCI bridges
+		/* If we've got a valid bus number, use it
+		 * The second condition is to ignore bus numbers on
+		 * populated slots that don't have PCI-PCI bridges
+		 */
 		if (secondary_bus && (secondary_bus != primary_bus)) {
 			bus_node = kmalloc(sizeof(*bus_node), GFP_KERNEL);
 			if (!bus_node)
@@ -1398,8 +1392,9 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
 		one_slot += sizeof (struct slot_rt);
 	}
 
-	// If all of the following fail, we don't have any resources for
-	// hot plug add
+	/* If all of the following fail, we don't have any resources for
+	 * hot plug add
+	 */
 	rc = 1;
 	rc &= cpqhp_resource_sort_and_combine(&(ctrl->mem_head));
 	rc &= cpqhp_resource_sort_and_combine(&(ctrl->p_mem_head));
diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c
index 42e4260c3b1..7485ffda950 100644
--- a/drivers/pci/hotplug/ibmphp_core.c
+++ b/drivers/pci/hotplug/ibmphp_core.c
@@ -1318,7 +1318,6 @@ error:
 }
 
 struct hotplug_slot_ops ibmphp_hotplug_slot_ops = {
-	.owner =			THIS_MODULE,
 	.set_attention_status =		set_attention_status,
 	.enable_slot =			enable_slot,
 	.disable_slot =			ibmphp_disable_slot,
@@ -1421,3 +1420,4 @@ static void __exit ibmphp_exit(void)
 }
 
 module_init(ibmphp_init);
+module_exit(ibmphp_exit);
diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c
index 535fce0f07f..844580489d4 100644
--- a/drivers/pci/hotplug/pci_hotplug_core.c
+++ b/drivers/pci/hotplug/pci_hotplug_core.c
@@ -347,125 +347,129 @@ static struct pci_slot_attribute hotplug_slot_attr_test = {
 	.store = test_write_file
 };
 
-static int has_power_file(struct pci_slot *pci_slot)
+static bool has_power_file(struct pci_slot *pci_slot)
 {
 	struct hotplug_slot *slot = pci_slot->hotplug;
 	if ((!slot) || (!slot->ops))
-		return -ENODEV;
+		return false;
 	if ((slot->ops->enable_slot) ||
 	    (slot->ops->disable_slot) ||
 	    (slot->ops->get_power_status))
-		return 0;
-	return -ENOENT;
+		return true;
+	return false;
 }
 
-static int has_attention_file(struct pci_slot *pci_slot)
+static bool has_attention_file(struct pci_slot *pci_slot)
 {
 	struct hotplug_slot *slot = pci_slot->hotplug;
 	if ((!slot) || (!slot->ops))
-		return -ENODEV;
+		return false;
 	if ((slot->ops->set_attention_status) ||
 	    (slot->ops->get_attention_status))
-		return 0;
-	return -ENOENT;
+		return true;
+	return false;
 }
 
-static int has_latch_file(struct pci_slot *pci_slot)
+static bool has_latch_file(struct pci_slot *pci_slot)
 {
 	struct hotplug_slot *slot = pci_slot->hotplug;
 	if ((!slot) || (!slot->ops))
-		return -ENODEV;
+		return false;
 	if (slot->ops->get_latch_status)
-		return 0;
-	return -ENOENT;
+		return true;
+	return false;
 }
 
-static int has_adapter_file(struct pci_slot *pci_slot)
+static bool has_adapter_file(struct pci_slot *pci_slot)
 {
 	struct hotplug_slot *slot = pci_slot->hotplug;
 	if ((!slot) || (!slot->ops))
-		return -ENODEV;
+		return false;
 	if (slot->ops->get_adapter_status)
-		return 0;
-	return -ENOENT;
+		return true;
+	return false;
 }
 
-static int has_max_bus_speed_file(struct pci_slot *pci_slot)
+static bool has_max_bus_speed_file(struct pci_slot *pci_slot)
 {
 	struct hotplug_slot *slot = pci_slot->hotplug;
 	if ((!slot) || (!slot->ops))
-		return -ENODEV;
+		return false;
 	if (slot->ops->get_max_bus_speed)
-		return 0;
-	return -ENOENT;
+		return true;
+	return false;
 }
 
-static int has_cur_bus_speed_file(struct pci_slot *pci_slot)
+static bool has_cur_bus_speed_file(struct pci_slot *pci_slot)
 {
 	struct hotplug_slot *slot = pci_slot->hotplug;
 	if ((!slot) || (!slot->ops))
-		return -ENODEV;
+		return false;
 	if (slot->ops->get_cur_bus_speed)
-		return 0;
-	return -ENOENT;
+		return true;
+	return false;
 }
 
-static int has_test_file(struct pci_slot *pci_slot)
+static bool has_test_file(struct pci_slot *pci_slot)
 {
 	struct hotplug_slot *slot = pci_slot->hotplug;
 	if ((!slot) || (!slot->ops))
-		return -ENODEV;
+		return false;
 	if (slot->ops->hardware_test)
-		return 0;
-	return -ENOENT;
+		return true;
+	return false;
 }
 
 static int fs_add_slot(struct pci_slot *slot)
 {
 	int retval = 0;
 
-	if (has_power_file(slot) == 0) {
-		retval = sysfs_create_file(&slot->kobj, &hotplug_slot_attr_power.attr);
+	/* Create symbolic link to the hotplug driver module */
+	pci_hp_create_module_link(slot);
+
+	if (has_power_file(slot)) {
+		retval = sysfs_create_file(&slot->kobj,
+					   &hotplug_slot_attr_power.attr);
 		if (retval)
 			goto exit_power;
 	}
 
-	if (has_attention_file(slot) == 0) {
+	if (has_attention_file(slot)) {
 		retval = sysfs_create_file(&slot->kobj,
 					   &hotplug_slot_attr_attention.attr);
 		if (retval)
 			goto exit_attention;
 	}
 
-	if (has_latch_file(slot) == 0) {
+	if (has_latch_file(slot)) {
 		retval = sysfs_create_file(&slot->kobj,
 					   &hotplug_slot_attr_latch.attr);
 		if (retval)
 			goto exit_latch;
 	}
 
-	if (has_adapter_file(slot) == 0) {
+	if (has_adapter_file(slot)) {
 		retval = sysfs_create_file(&slot->kobj,
 					   &hotplug_slot_attr_presence.attr);
 		if (retval)
 			goto exit_adapter;
 	}
 
-	if (has_max_bus_speed_file(slot) == 0) {
+	if (has_max_bus_speed_file(slot)) {
 		retval = sysfs_create_file(&slot->kobj,
-					   &hotplug_slot_attr_max_bus_speed.attr);
+					&hotplug_slot_attr_max_bus_speed.attr);
 		if (retval)
 			goto exit_max_speed;
 	}
 
-	if (has_cur_bus_speed_file(slot) == 0) {
+	if (has_cur_bus_speed_file(slot)) {
 		retval = sysfs_create_file(&slot->kobj,
-					   &hotplug_slot_attr_cur_bus_speed.attr);
+					&hotplug_slot_attr_cur_bus_speed.attr);
 		if (retval)
 			goto exit_cur_speed;
 	}
 
-	if (has_test_file(slot) == 0) {
+	if (has_test_file(slot)) {
 		retval = sysfs_create_file(&slot->kobj,
 					   &hotplug_slot_attr_test.attr);
 		if (retval)
@@ -475,55 +479,61 @@ static int fs_add_slot(struct pci_slot *slot)
 	goto exit;
 
 exit_test:
-	if (has_cur_bus_speed_file(slot) == 0)
-		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_cur_bus_speed.attr);
-
+	if (has_cur_bus_speed_file(slot))
+		sysfs_remove_file(&slot->kobj,
+				  &hotplug_slot_attr_cur_bus_speed.attr);
 exit_cur_speed:
-	if (has_max_bus_speed_file(slot) == 0)
-		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_max_bus_speed.attr);
-
+	if (has_max_bus_speed_file(slot))
+		sysfs_remove_file(&slot->kobj,
+				  &hotplug_slot_attr_max_bus_speed.attr);
 exit_max_speed:
-	if (has_adapter_file(slot) == 0)
-		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_presence.attr);
-
+	if (has_adapter_file(slot))
+		sysfs_remove_file(&slot->kobj,
+				  &hotplug_slot_attr_presence.attr);
 exit_adapter:
-	if (has_latch_file(slot) == 0)
+	if (has_latch_file(slot))
 		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_latch.attr);
-
 exit_latch:
-	if (has_attention_file(slot) == 0)
-		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_attention.attr);
-
+	if (has_attention_file(slot))
+		sysfs_remove_file(&slot->kobj,
+				  &hotplug_slot_attr_attention.attr);
 exit_attention:
-	if (has_power_file(slot) == 0)
+	if (has_power_file(slot))
 		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_power.attr);
 exit_power:
+	pci_hp_remove_module_link(slot);
 exit:
 	return retval;
 }
 
 static void fs_remove_slot(struct pci_slot *slot)
 {
-	if (has_power_file(slot) == 0)
+	if (has_power_file(slot))
 		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_power.attr);
 
-	if (has_attention_file(slot) == 0)
-		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_attention.attr);
+	if (has_attention_file(slot))
+		sysfs_remove_file(&slot->kobj,
+				  &hotplug_slot_attr_attention.attr);
 
-	if (has_latch_file(slot) == 0)
+	if (has_latch_file(slot))
 		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_latch.attr);
 
-	if (has_adapter_file(slot) == 0)
-		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_presence.attr);
+	if (has_adapter_file(slot))
+		sysfs_remove_file(&slot->kobj,
+				  &hotplug_slot_attr_presence.attr);
 
-	if (has_max_bus_speed_file(slot) == 0)
-		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_max_bus_speed.attr);
+	if (has_max_bus_speed_file(slot))
+		sysfs_remove_file(&slot->kobj,
+				  &hotplug_slot_attr_max_bus_speed.attr);
 
-	if (has_cur_bus_speed_file(slot) == 0)
-		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_cur_bus_speed.attr);
+	if (has_cur_bus_speed_file(slot))
+		sysfs_remove_file(&slot->kobj,
+				  &hotplug_slot_attr_cur_bus_speed.attr);
 
-	if (has_test_file(slot) == 0)
+	if (has_test_file(slot))
 		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_test.attr);
+
+	pci_hp_remove_module_link(slot);
 }
 
 static struct hotplug_slot *get_slot_from_name (const char *name)
@@ -540,10 +550,10 @@ static struct hotplug_slot *get_slot_from_name (const char *name)
 }
 
 /**
- * pci_hp_register - register a hotplug_slot with the PCI hotplug subsystem
+ * __pci_hp_register - register a hotplug_slot with the PCI hotplug subsystem
  * @bus: bus this slot is on
  * @slot: pointer to the &struct hotplug_slot to register
- * @slot_nr: slot number
+ * @devnr: device number
  * @name: name registered with kobject core
  *
  * Registers a hotplug slot with the pci hotplug subsystem, which will allow
@@ -551,8 +561,9 @@ static struct hotplug_slot *get_slot_from_name (const char *name)
  *
  * Returns 0 if successful, anything else for an error.
  */
-int pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus, int slot_nr,
-			const char *name)
+int __pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus,
+		      int devnr, const char *name,
+		      struct module *owner, const char *mod_name)
 {
 	int result;
 	struct pci_slot *pci_slot;
@@ -567,14 +578,16 @@ int pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus, int slot_nr,
 		return -EINVAL;
 	}
 
-	mutex_lock(&pci_hp_mutex);
+	slot->ops->owner = owner;
+	slot->ops->mod_name = mod_name;
 
+	mutex_lock(&pci_hp_mutex);
 	/*
 	 * No problems if we call this interface from both ACPI_PCI_SLOT
 	 * driver and call it here again. If we've already created the
 	 * pci_slot, the interface will simply bump the refcount.
 	 */
-	pci_slot = pci_create_slot(bus, slot_nr, name, slot);
+	pci_slot = pci_create_slot(bus, devnr, name, slot);
 	if (IS_ERR(pci_slot)) {
 		result = PTR_ERR(pci_slot);
 		goto out;
@@ -684,6 +697,6 @@ MODULE_LICENSE("GPL");
 module_param(debug, bool, 0644);
 MODULE_PARM_DESC(debug, "Debugging mode enabled or not");
 
-EXPORT_SYMBOL_GPL(pci_hp_register);
+EXPORT_SYMBOL_GPL(__pci_hp_register);
 EXPORT_SYMBOL_GPL(pci_hp_deregister);
 EXPORT_SYMBOL_GPL(pci_hp_change_slot_info);
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index 0a368547e63..e6cf096498b 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -81,7 +81,6 @@ struct slot {
 	struct hpc_ops *hpc_ops;
 	struct hotplug_slot *hotplug_slot;
 	struct list_head	slot_list;
-	unsigned long last_emi_toggle;
 	struct delayed_work work;	/* work for button event */
 	struct mutex lock;
 };
@@ -203,8 +202,6 @@ struct hpc_ops {
 	int (*set_attention_status)(struct slot *slot, u8 status);
 	int (*get_latch_status)(struct slot *slot, u8 *status);
 	int (*get_adapter_status)(struct slot *slot, u8 *status);
-	int (*get_emi_status)(struct slot *slot, u8 *status);
-	int (*toggle_emi)(struct slot *slot);
 	int (*get_max_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
 	int (*get_cur_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
 	int (*get_max_lnk_width)(struct slot *slot, enum pcie_link_width *val);
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index fb254b2454d..2317557fdee 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -73,7 +73,6 @@ static int get_max_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *val
 static int get_cur_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *value);
 
 static struct hotplug_slot_ops pciehp_hotplug_slot_ops = {
-	.owner =		THIS_MODULE,
 	.set_attention_status =	set_attention_status,
 	.enable_slot =		enable_slot,
 	.disable_slot =		disable_slot,
@@ -85,99 +84,6 @@ static struct hotplug_slot_ops pciehp_hotplug_slot_ops = {
   	.get_cur_bus_speed =	get_cur_bus_speed,
 };
 
-/*
- * Check the status of the Electro Mechanical Interlock (EMI)
- */
-static int get_lock_status(struct hotplug_slot *hotplug_slot, u8 *value)
-{
-	struct slot *slot = hotplug_slot->private;
-	return (slot->hpc_ops->get_emi_status(slot, value));
-}
-
-/*
- * sysfs interface for the Electro Mechanical Interlock (EMI)
- * 1 == locked, 0 == unlocked
- */
-static ssize_t lock_read_file(struct hotplug_slot *slot, char *buf)
-{
-	int retval;
-	u8 value;
-
-	retval = get_lock_status(slot, &value);
-	if (retval)
-		goto lock_read_exit;
-	retval = sprintf (buf, "%d\n", value);
-
-lock_read_exit:
-	return retval;
-}
-
-/*
- * Change the status of the Electro Mechanical Interlock (EMI)
- * This is a toggle - in addition there must be at least 1 second
- * in between toggles.
- */
-static int set_lock_status(struct hotplug_slot *hotplug_slot, u8 status)
-{
-	struct slot *slot = hotplug_slot->private;
-	int retval;
-	u8 value;
-
-	mutex_lock(&slot->ctrl->crit_sect);
-
-	/* has it been >1 sec since our last toggle? */
-	if ((get_seconds() - slot->last_emi_toggle) < 1) {
-		mutex_unlock(&slot->ctrl->crit_sect);
-		return -EINVAL;
-	}
-
-	/* see what our current state is */
-	retval = get_lock_status(hotplug_slot, &value);
-	if (retval || (value == status))
-		goto set_lock_exit;
-
-	slot->hpc_ops->toggle_emi(slot);
-set_lock_exit:
-	mutex_unlock(&slot->ctrl->crit_sect);
-	return 0;
-}
-
-/*
- * sysfs interface which allows the user to toggle the Electro Mechanical
- * Interlock.  Valid values are either 0 or 1.  0 == unlock, 1 == lock
- */
-static ssize_t lock_write_file(struct hotplug_slot *hotplug_slot,
-		const char *buf, size_t count)
-{
-	struct slot *slot = hotplug_slot->private;
-	unsigned long llock;
-	u8 lock;
-	int retval = 0;
-
-	llock = simple_strtoul(buf, NULL, 10);
-	lock = (u8)(llock & 0xff);
-
-	switch (lock) {
-		case 0:
-		case 1:
-			retval = set_lock_status(hotplug_slot, lock);
-			break;
-		default:
-			ctrl_err(slot->ctrl, "%d is an invalid lock value\n",
-				 lock);
-			retval = -EINVAL;
-	}
-	if (retval)
-		return retval;
-	return count;
-}
-
-static struct hotplug_slot_attribute hotplug_slot_attr_lock = {
-	.attr = {.name = "lock", .mode = S_IFREG | S_IRUGO | S_IWUSR},
-	.show = lock_read_file,
-	.store = lock_write_file
-};
-
 /**
  * release_slot - free up the memory used by a slot
  * @hotplug_slot: slot to free
@@ -236,17 +142,6 @@ static int init_slots(struct controller *ctrl)
 		get_attention_status(hotplug_slot, &info->attention_status);
 		get_latch_status(hotplug_slot, &info->latch_status);
 		get_adapter_status(hotplug_slot, &info->adapter_status);
-		/* create additional sysfs entries */
-		if (EMI(ctrl)) {
-			retval = sysfs_create_file(&hotplug_slot->pci_slot->kobj,
-				&hotplug_slot_attr_lock.attr);
-			if (retval) {
-				pci_hp_deregister(hotplug_slot);
-				ctrl_err(ctrl, "Cannot create additional sysfs "
-					 "entries\n");
-				goto error_info;
-			}
-		}
 	}
 
 	return 0;
@@ -261,13 +156,8 @@ error:
 static void cleanup_slots(struct controller *ctrl)
 {
 	struct slot *slot;
-
-	list_for_each_entry(slot, &ctrl->slot_list, slot_list) {
-		if (EMI(ctrl))
-			sysfs_remove_file(&slot->hotplug_slot->pci_slot->kobj,
-				&hotplug_slot_attr_lock.attr);
+	list_for_each_entry(slot, &ctrl->slot_list, slot_list)
 		pci_hp_deregister(slot->hotplug_slot);
-	}
 }
 
 /*
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 07bd3215114..52813257e5b 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -422,35 +422,6 @@ static int hpc_query_power_fault(struct slot *slot)
 	return !!(slot_status & PCI_EXP_SLTSTA_PFD);
 }
 
-static int hpc_get_emi_status(struct slot *slot, u8 *status)
-{
-	struct controller *ctrl = slot->ctrl;
-	u16 slot_status;
-	int retval;
-
-	retval = pciehp_readw(ctrl, PCI_EXP_SLTSTA, &slot_status);
-	if (retval) {
-		ctrl_err(ctrl, "Cannot check EMI status\n");
-		return retval;
-	}
-	*status = !!(slot_status & PCI_EXP_SLTSTA_EIS);
-	return retval;
-}
-
-static int hpc_toggle_emi(struct slot *slot)
-{
-	u16 slot_cmd;
-	u16 cmd_mask;
-	int rc;
-
-	slot_cmd = PCI_EXP_SLTCTL_EIC;
-	cmd_mask = PCI_EXP_SLTCTL_EIC;
-	rc = pcie_write_cmd(slot->ctrl, slot_cmd, cmd_mask);
-	slot->last_emi_toggle = get_seconds();
-
-	return rc;
-}
-
 static int hpc_set_attention_status(struct slot *slot, u8 value)
 {
 	struct controller *ctrl = slot->ctrl;
@@ -874,8 +845,6 @@ static struct hpc_ops pciehp_hpc_ops = {
 	.get_attention_status		= hpc_get_attention_status,
 	.get_latch_status		= hpc_get_latch_status,
 	.get_adapter_status		= hpc_get_adapter_status,
-	.get_emi_status			= hpc_get_emi_status,
-	.toggle_emi			= hpc_toggle_emi,
 
 	.get_max_bus_speed		= hpc_get_max_lnk_speed,
 	.get_cur_bus_speed		= hpc_get_cur_lnk_speed,
diff --git a/drivers/pci/hotplug/pcihp_skeleton.c b/drivers/pci/hotplug/pcihp_skeleton.c
index e3dd6cf9e89..5175d9b26f0 100644
--- a/drivers/pci/hotplug/pcihp_skeleton.c
+++ b/drivers/pci/hotplug/pcihp_skeleton.c
@@ -82,7 +82,6 @@ static int get_latch_status	(struct hotplug_slot *slot, u8 *value);
 static int get_adapter_status	(struct hotplug_slot *slot, u8 *value);
 
 static struct hotplug_slot_ops skel_hotplug_slot_ops = {
-	.owner =		THIS_MODULE,
 	.enable_slot =		enable_slot,
 	.disable_slot =		disable_slot,
 	.set_attention_status =	set_attention_status,
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index 95d02a08fdc..c159223389e 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -423,7 +423,6 @@ static int disable_slot(struct hotplug_slot *hotplug_slot)
 }
 
 struct hotplug_slot_ops rpaphp_hotplug_slot_ops = {
-	.owner = THIS_MODULE,
 	.enable_slot = enable_slot,
 	.disable_slot = disable_slot,
 	.set_attention_status = set_attention_status,
diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c
index 2d6da78fddb..a4494d78e7c 100644
--- a/drivers/pci/hotplug/sgi_hotplug.c
+++ b/drivers/pci/hotplug/sgi_hotplug.c
@@ -83,7 +83,6 @@ static int disable_slot(struct hotplug_slot *slot);
 static inline int get_power_status(struct hotplug_slot *slot, u8 *value);
 
 static struct hotplug_slot_ops sn_hotplug_slot_ops = {
-	.owner                  = THIS_MODULE,
 	.enable_slot            = enable_slot,
 	.disable_slot           = disable_slot,
 	.get_power_status       = get_power_status,
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index fe8d149c229..8a520a3d0f5 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -69,7 +69,6 @@ static int get_max_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *val
 static int get_cur_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *value);
 
 static struct hotplug_slot_ops shpchp_hotplug_slot_ops = {
-	.owner =		THIS_MODULE,
 	.set_attention_status =	set_attention_status,
 	.enable_slot =		enable_slot,
 	.disable_slot =		disable_slot,
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index cd389162735..178853a0744 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -53,6 +53,8 @@
 
 #define DEFAULT_DOMAIN_ADDRESS_WIDTH 48
 
+#define MAX_AGAW_WIDTH 64
+
 #define DOMAIN_MAX_ADDR(gaw) ((((u64)1) << gaw) - 1)
 
 #define IOVA_PFN(addr)		((addr) >> PAGE_SHIFT)
@@ -131,8 +133,6 @@ static inline void context_set_fault_enable(struct context_entry *context)
 	context->lo &= (((u64)-1) << 2) | 1;
 }
 
-#define CONTEXT_TT_MULTI_LEVEL 0
-
 static inline void context_set_translation_type(struct context_entry *context,
 						unsigned long value)
 {
@@ -256,6 +256,7 @@ struct device_domain_info {
 	u8 bus;			/* PCI bus number */
 	u8 devfn;		/* PCI devfn number */
 	struct pci_dev *dev; /* it's NULL for PCIE-to-PCI bridge */
+	struct intel_iommu *iommu; /* IOMMU used by this device */
 	struct dmar_domain *domain; /* pointer to domain */
 };
 
@@ -401,17 +402,13 @@ void free_iova_mem(struct iova *iova)
 
 static inline int width_to_agaw(int width);
 
-/* calculate agaw for each iommu.
- * "SAGAW" may be different across iommus, use a default agaw, and
- * get a supported less agaw for iommus that don't support the default agaw.
- */
-int iommu_calculate_agaw(struct intel_iommu *iommu)
+static int __iommu_calculate_agaw(struct intel_iommu *iommu, int max_gaw)
 {
 	unsigned long sagaw;
 	int agaw = -1;
 
 	sagaw = cap_sagaw(iommu->cap);
-	for (agaw = width_to_agaw(DEFAULT_DOMAIN_ADDRESS_WIDTH);
+	for (agaw = width_to_agaw(max_gaw);
 	     agaw >= 0; agaw--) {
 		if (test_bit(agaw, &sagaw))
 			break;
@@ -420,6 +417,24 @@ int iommu_calculate_agaw(struct intel_iommu *iommu)
 	return agaw;
 }
 
+/*
+ * Calculate max SAGAW for each iommu.
+ */
+int iommu_calculate_max_sagaw(struct intel_iommu *iommu)
+{
+	return __iommu_calculate_agaw(iommu, MAX_AGAW_WIDTH);
+}
+
+/*
+ * calculate agaw for each iommu.
+ * "SAGAW" may be different across iommus, use a default agaw, and
+ * get a supported less agaw for iommus that don't support the default agaw.
+ */
+int iommu_calculate_agaw(struct intel_iommu *iommu)
+{
+	return __iommu_calculate_agaw(iommu, DEFAULT_DOMAIN_ADDRESS_WIDTH);
+}
+
 /* in native case, each domain is related to only one iommu */
 static struct intel_iommu *domain_get_iommu(struct dmar_domain *domain)
 {
@@ -809,7 +824,7 @@ static int iommu_alloc_root_entry(struct intel_iommu *iommu)
 static void iommu_set_root_entry(struct intel_iommu *iommu)
 {
 	void *addr;
-	u32 cmd, sts;
+	u32 sts;
 	unsigned long flag;
 
 	addr = iommu->root_entry;
@@ -817,12 +832,11 @@ static void iommu_set_root_entry(struct intel_iommu *iommu)
 	spin_lock_irqsave(&iommu->register_lock, flag);
 	dmar_writeq(iommu->reg + DMAR_RTADDR_REG, virt_to_phys(addr));
 
-	cmd = iommu->gcmd | DMA_GCMD_SRTP;
-	writel(cmd, iommu->reg + DMAR_GCMD_REG);
+	writel(iommu->gcmd | DMA_GCMD_SRTP, iommu->reg + DMAR_GCMD_REG);
 
 	/* Make sure hardware complete it */
 	IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG,
-		readl, (sts & DMA_GSTS_RTPS), sts);
+		      readl, (sts & DMA_GSTS_RTPS), sts);
 
 	spin_unlock_irqrestore(&iommu->register_lock, flag);
 }
@@ -834,39 +848,25 @@ static void iommu_flush_write_buffer(struct intel_iommu *iommu)
 
 	if (!rwbf_quirk && !cap_rwbf(iommu->cap))
 		return;
-	val = iommu->gcmd | DMA_GCMD_WBF;
 
 	spin_lock_irqsave(&iommu->register_lock, flag);
-	writel(val, iommu->reg + DMAR_GCMD_REG);
+	writel(iommu->gcmd | DMA_GCMD_WBF, iommu->reg + DMAR_GCMD_REG);
 
 	/* Make sure hardware complete it */
 	IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG,
-			readl, (!(val & DMA_GSTS_WBFS)), val);
+		      readl, (!(val & DMA_GSTS_WBFS)), val);
 
 	spin_unlock_irqrestore(&iommu->register_lock, flag);
 }
 
 /* return value determine if we need a write buffer flush */
-static int __iommu_flush_context(struct intel_iommu *iommu,
-	u16 did, u16 source_id, u8 function_mask, u64 type,
-	int non_present_entry_flush)
+static void __iommu_flush_context(struct intel_iommu *iommu,
+				  u16 did, u16 source_id, u8 function_mask,
+				  u64 type)
 {
 	u64 val = 0;
 	unsigned long flag;
 
-	/*
-	 * In the non-present entry flush case, if hardware doesn't cache
-	 * non-present entry we do nothing and if hardware cache non-present
-	 * entry, we flush entries of domain 0 (the domain id is used to cache
-	 * any non-present entries)
-	 */
-	if (non_present_entry_flush) {
-		if (!cap_caching_mode(iommu->cap))
-			return 1;
-		else
-			did = 0;
-	}
-
 	switch (type) {
 	case DMA_CCMD_GLOBAL_INVL:
 		val = DMA_CCMD_GLOBAL_INVL;
@@ -891,33 +891,16 @@ static int __iommu_flush_context(struct intel_iommu *iommu,
 		dmar_readq, (!(val & DMA_CCMD_ICC)), val);
 
 	spin_unlock_irqrestore(&iommu->register_lock, flag);
-
-	/* flush context entry will implicitly flush write buffer */
-	return 0;
 }
 
 /* return value determine if we need a write buffer flush */
-static int __iommu_flush_iotlb(struct intel_iommu *iommu, u16 did,
-	u64 addr, unsigned int size_order, u64 type,
-	int non_present_entry_flush)
+static void __iommu_flush_iotlb(struct intel_iommu *iommu, u16 did,
+				u64 addr, unsigned int size_order, u64 type)
 {
 	int tlb_offset = ecap_iotlb_offset(iommu->ecap);
 	u64 val = 0, val_iva = 0;
 	unsigned long flag;
 
-	/*
-	 * In the non-present entry flush case, if hardware doesn't cache
-	 * non-present entry we do nothing and if hardware cache non-present
-	 * entry, we flush entries of domain 0 (the domain id is used to cache
-	 * any non-present entries)
-	 */
-	if (non_present_entry_flush) {
-		if (!cap_caching_mode(iommu->cap))
-			return 1;
-		else
-			did = 0;
-	}
-
 	switch (type) {
 	case DMA_TLB_GLOBAL_FLUSH:
 		/* global flush doesn't need set IVA_REG */
@@ -965,37 +948,101 @@ static int __iommu_flush_iotlb(struct intel_iommu *iommu, u16 did,
 		pr_debug("IOMMU: tlb flush request %Lx, actual %Lx\n",
 			(unsigned long long)DMA_TLB_IIRG(type),
 			(unsigned long long)DMA_TLB_IAIG(val));
-	/* flush iotlb entry will implicitly flush write buffer */
-	return 0;
 }
 
-static int iommu_flush_iotlb_psi(struct intel_iommu *iommu, u16 did,
-	u64 addr, unsigned int pages, int non_present_entry_flush)
+static struct device_domain_info *iommu_support_dev_iotlb(
+	struct dmar_domain *domain, int segment, u8 bus, u8 devfn)
+{
+	int found = 0;
+	unsigned long flags;
+	struct device_domain_info *info;
+	struct intel_iommu *iommu = device_to_iommu(segment, bus, devfn);
+
+	if (!ecap_dev_iotlb_support(iommu->ecap))
+		return NULL;
+
+	if (!iommu->qi)
+		return NULL;
+
+	spin_lock_irqsave(&device_domain_lock, flags);
+	list_for_each_entry(info, &domain->devices, link)
+		if (info->bus == bus && info->devfn == devfn) {
+			found = 1;
+			break;
+		}
+	spin_unlock_irqrestore(&device_domain_lock, flags);
+
+	if (!found || !info->dev)
+		return NULL;
+
+	if (!pci_find_ext_capability(info->dev, PCI_EXT_CAP_ID_ATS))
+		return NULL;
+
+	if (!dmar_find_matched_atsr_unit(info->dev))
+		return NULL;
+
+	info->iommu = iommu;
+
+	return info;
+}
+
+static void iommu_enable_dev_iotlb(struct device_domain_info *info)
 {
-	unsigned int mask;
+	if (!info)
+		return;
+
+	pci_enable_ats(info->dev, VTD_PAGE_SHIFT);
+}
+
+static void iommu_disable_dev_iotlb(struct device_domain_info *info)
+{
+	if (!info->dev || !pci_ats_enabled(info->dev))
+		return;
+
+	pci_disable_ats(info->dev);
+}
+
+static void iommu_flush_dev_iotlb(struct dmar_domain *domain,
+				  u64 addr, unsigned mask)
+{
+	u16 sid, qdep;
+	unsigned long flags;
+	struct device_domain_info *info;
+
+	spin_lock_irqsave(&device_domain_lock, flags);
+	list_for_each_entry(info, &domain->devices, link) {
+		if (!info->dev || !pci_ats_enabled(info->dev))
+			continue;
+
+		sid = info->bus << 8 | info->devfn;
+		qdep = pci_ats_queue_depth(info->dev);
+		qi_flush_dev_iotlb(info->iommu, sid, qdep, addr, mask);
+	}
+	spin_unlock_irqrestore(&device_domain_lock, flags);
+}
+
+static void iommu_flush_iotlb_psi(struct intel_iommu *iommu, u16 did,
+				  u64 addr, unsigned int pages)
+{
+	unsigned int mask = ilog2(__roundup_pow_of_two(pages));
 
 	BUG_ON(addr & (~VTD_PAGE_MASK));
 	BUG_ON(pages == 0);
 
-	/* Fallback to domain selective flush if no PSI support */
-	if (!cap_pgsel_inv(iommu->cap))
-		return iommu->flush.flush_iotlb(iommu, did, 0, 0,
-						DMA_TLB_DSI_FLUSH,
-						non_present_entry_flush);
-
 	/*
+	 * Fallback to domain selective flush if no PSI support or the size is
+	 * too big.
 	 * PSI requires page size to be 2 ^ x, and the base address is naturally
 	 * aligned to the size
 	 */
-	mask = ilog2(__roundup_pow_of_two(pages));
-	/* Fallback to domain selective flush if size is too big */
-	if (mask > cap_max_amask_val(iommu->cap))
-		return iommu->flush.flush_iotlb(iommu, did, 0, 0,
-			DMA_TLB_DSI_FLUSH, non_present_entry_flush);
-
-	return iommu->flush.flush_iotlb(iommu, did, addr, mask,
-					DMA_TLB_PSI_FLUSH,
-					non_present_entry_flush);
+	if (!cap_pgsel_inv(iommu->cap) || mask > cap_max_amask_val(iommu->cap))
+		iommu->flush.flush_iotlb(iommu, did, 0, 0,
+						DMA_TLB_DSI_FLUSH);
+	else
+		iommu->flush.flush_iotlb(iommu, did, addr, mask,
+						DMA_TLB_PSI_FLUSH);
+	if (did)
+		iommu_flush_dev_iotlb(iommu->domains[did], addr, mask);
 }
 
 static void iommu_disable_protect_mem_regions(struct intel_iommu *iommu)
@@ -1021,13 +1068,13 @@ static int iommu_enable_translation(struct intel_iommu *iommu)
 	unsigned long flags;
 
 	spin_lock_irqsave(&iommu->register_lock, flags);
-	writel(iommu->gcmd|DMA_GCMD_TE, iommu->reg + DMAR_GCMD_REG);
+	iommu->gcmd |= DMA_GCMD_TE;
+	writel(iommu->gcmd, iommu->reg + DMAR_GCMD_REG);
 
 	/* Make sure hardware complete it */
 	IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG,
-		readl, (sts & DMA_GSTS_TES), sts);
+		      readl, (sts & DMA_GSTS_TES), sts);
 
-	iommu->gcmd |= DMA_GCMD_TE;
 	spin_unlock_irqrestore(&iommu->register_lock, flags);
 	return 0;
 }
@@ -1043,7 +1090,7 @@ static int iommu_disable_translation(struct intel_iommu *iommu)
 
 	/* Make sure hardware complete it */
 	IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG,
-		readl, (!(sts & DMA_GSTS_TES)), sts);
+		      readl, (!(sts & DMA_GSTS_TES)), sts);
 
 	spin_unlock_irqrestore(&iommu->register_lock, flag);
 	return 0;
@@ -1325,8 +1372,8 @@ static void domain_exit(struct dmar_domain *domain)
 	free_domain_mem(domain);
 }
 
-static int domain_context_mapping_one(struct dmar_domain *domain,
-				      int segment, u8 bus, u8 devfn)
+static int domain_context_mapping_one(struct dmar_domain *domain, int segment,
+				 u8 bus, u8 devfn, int translation)
 {
 	struct context_entry *context;
 	unsigned long flags;
@@ -1336,10 +1383,14 @@ static int domain_context_mapping_one(struct dmar_domain *domain,
 	unsigned long ndomains;
 	int id;
 	int agaw;
+	struct device_domain_info *info = NULL;
 
 	pr_debug("Set context mapping for %02x:%02x.%d\n",
 		bus, PCI_SLOT(devfn), PCI_FUNC(devfn));
+
 	BUG_ON(!domain->pgd);
+	BUG_ON(translation != CONTEXT_TT_PASS_THROUGH &&
+	       translation != CONTEXT_TT_MULTI_LEVEL);
 
 	iommu = device_to_iommu(segment, bus, devfn);
 	if (!iommu)
@@ -1399,21 +1450,44 @@ static int domain_context_mapping_one(struct dmar_domain *domain,
 	}
 
 	context_set_domain_id(context, id);
-	context_set_address_width(context, iommu->agaw);
-	context_set_address_root(context, virt_to_phys(pgd));
-	context_set_translation_type(context, CONTEXT_TT_MULTI_LEVEL);
+
+	if (translation != CONTEXT_TT_PASS_THROUGH) {
+		info = iommu_support_dev_iotlb(domain, segment, bus, devfn);
+		translation = info ? CONTEXT_TT_DEV_IOTLB :
+				     CONTEXT_TT_MULTI_LEVEL;
+	}
+	/*
+	 * In pass through mode, AW must be programmed to indicate the largest
+	 * AGAW value supported by hardware. And ASR is ignored by hardware.
+	 */
+	if (unlikely(translation == CONTEXT_TT_PASS_THROUGH))
+		context_set_address_width(context, iommu->msagaw);
+	else {
+		context_set_address_root(context, virt_to_phys(pgd));
+		context_set_address_width(context, iommu->agaw);
+	}
+
+	context_set_translation_type(context, translation);
 	context_set_fault_enable(context);
 	context_set_present(context);
 	domain_flush_cache(domain, context, sizeof(*context));
 
-	/* it's a non-present to present mapping */
-	if (iommu->flush.flush_context(iommu, domain->id,
-		(((u16)bus) << 8) | devfn, DMA_CCMD_MASK_NOBIT,
-		DMA_CCMD_DEVICE_INVL, 1))
+	/*
+	 * It's a non-present to present mapping. If hardware doesn't cache
+	 * non-present entry we only need to flush the write-buffer. If the
+	 * _does_ cache non-present entries, then it does so in the special
+	 * domain #0, which we have to flush:
+	 */
+	if (cap_caching_mode(iommu->cap)) {
+		iommu->flush.flush_context(iommu, 0,
+					   (((u16)bus) << 8) | devfn,
+					   DMA_CCMD_MASK_NOBIT,
+					   DMA_CCMD_DEVICE_INVL);
+		iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_DSI_FLUSH);
+	} else {
 		iommu_flush_write_buffer(iommu);
-	else
-		iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_DSI_FLUSH, 0);
-
+	}
+	iommu_enable_dev_iotlb(info);
 	spin_unlock_irqrestore(&iommu->lock, flags);
 
 	spin_lock_irqsave(&domain->iommu_lock, flags);
@@ -1426,13 +1500,15 @@ static int domain_context_mapping_one(struct dmar_domain *domain,
 }
 
 static int
-domain_context_mapping(struct dmar_domain *domain, struct pci_dev *pdev)
+domain_context_mapping(struct dmar_domain *domain, struct pci_dev *pdev,
+			int translation)
 {
 	int ret;
 	struct pci_dev *tmp, *parent;
 
 	ret = domain_context_mapping_one(domain, pci_domain_nr(pdev->bus),
-					 pdev->bus->number, pdev->devfn);
+					 pdev->bus->number, pdev->devfn,
+					 translation);
 	if (ret)
 		return ret;
 
@@ -1446,7 +1522,7 @@ domain_context_mapping(struct dmar_domain *domain, struct pci_dev *pdev)
 		ret = domain_context_mapping_one(domain,
 						 pci_domain_nr(parent->bus),
 						 parent->bus->number,
-						 parent->devfn);
+						 parent->devfn, translation);
 		if (ret)
 			return ret;
 		parent = parent->bus->self;
@@ -1454,12 +1530,14 @@ domain_context_mapping(struct dmar_domain *domain, struct pci_dev *pdev)
 	if (tmp->is_pcie) /* this is a PCIE-to-PCI bridge */
 		return domain_context_mapping_one(domain,
 					pci_domain_nr(tmp->subordinate),
-					tmp->subordinate->number, 0);
+					tmp->subordinate->number, 0,
+					translation);
 	else /* this is a legacy PCI bridge */
 		return domain_context_mapping_one(domain,
 						  pci_domain_nr(tmp->bus),
 						  tmp->bus->number,
-						  tmp->devfn);
+						  tmp->devfn,
+						  translation);
 }
 
 static int domain_context_mapped(struct pci_dev *pdev)
@@ -1540,9 +1618,8 @@ static void iommu_detach_dev(struct intel_iommu *iommu, u8 bus, u8 devfn)
 
 	clear_context_table(iommu, bus, devfn);
 	iommu->flush.flush_context(iommu, 0, 0, 0,
-					   DMA_CCMD_GLOBAL_INVL, 0);
-	iommu->flush.flush_iotlb(iommu, 0, 0, 0,
-					 DMA_TLB_GLOBAL_FLUSH, 0);
+					   DMA_CCMD_GLOBAL_INVL);
+	iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH);
 }
 
 static void domain_remove_dev_info(struct dmar_domain *domain)
@@ -1561,6 +1638,7 @@ static void domain_remove_dev_info(struct dmar_domain *domain)
 			info->dev->dev.archdata.iommu = NULL;
 		spin_unlock_irqrestore(&device_domain_lock, flags);
 
+		iommu_disable_dev_iotlb(info);
 		iommu = device_to_iommu(info->segment, info->bus, info->devfn);
 		iommu_detach_dev(iommu, info->bus, info->devfn);
 		free_devinfo_mem(info);
@@ -1756,7 +1834,7 @@ static int iommu_prepare_identity_map(struct pci_dev *pdev,
 		goto error;
 
 	/* context entry init */
-	ret = domain_context_mapping(domain, pdev);
+	ret = domain_context_mapping(domain, pdev, CONTEXT_TT_MULTI_LEVEL);
 	if (!ret)
 		return 0;
 error:
@@ -1857,6 +1935,23 @@ static inline void iommu_prepare_isa(void)
 }
 #endif /* !CONFIG_DMAR_FLPY_WA */
 
+/* Initialize each context entry as pass through.*/
+static int __init init_context_pass_through(void)
+{
+	struct pci_dev *pdev = NULL;
+	struct dmar_domain *domain;
+	int ret;
+
+	for_each_pci_dev(pdev) {
+		domain = get_domain_for_dev(pdev, DEFAULT_DOMAIN_ADDRESS_WIDTH);
+		ret = domain_context_mapping(domain, pdev,
+					     CONTEXT_TT_PASS_THROUGH);
+		if (ret)
+			return ret;
+	}
+	return 0;
+}
+
 static int __init init_dmars(void)
 {
 	struct dmar_drhd_unit *drhd;
@@ -1864,6 +1959,7 @@ static int __init init_dmars(void)
 	struct pci_dev *pdev;
 	struct intel_iommu *iommu;
 	int i, ret;
+	int pass_through = 1;
 
 	/*
 	 * for each drhd
@@ -1917,7 +2013,15 @@ static int __init init_dmars(void)
 			printk(KERN_ERR "IOMMU: allocate root entry failed\n");
 			goto error;
 		}
+		if (!ecap_pass_through(iommu->ecap))
+			pass_through = 0;
 	}
+	if (iommu_pass_through)
+		if (!pass_through) {
+			printk(KERN_INFO
+			       "Pass Through is not supported by hardware.\n");
+			iommu_pass_through = 0;
+		}
 
 	/*
 	 * Start from the sane iommu hardware state.
@@ -1973,35 +2077,56 @@ static int __init init_dmars(void)
 	}
 
 	/*
-	 * For each rmrr
-	 *   for each dev attached to rmrr
-	 *   do
-	 *     locate drhd for dev, alloc domain for dev
-	 *     allocate free domain
-	 *     allocate page table entries for rmrr
-	 *     if context not allocated for bus
-	 *           allocate and init context
-	 *           set present in root table for this bus
-	 *     init context with domain, translation etc
-	 *    endfor
-	 * endfor
+	 * If pass through is set and enabled, context entries of all pci
+	 * devices are intialized by pass through translation type.
 	 */
-	for_each_rmrr_units(rmrr) {
-		for (i = 0; i < rmrr->devices_cnt; i++) {
-			pdev = rmrr->devices[i];
-			/* some BIOS lists non-exist devices in DMAR table */
-			if (!pdev)
-				continue;
-			ret = iommu_prepare_rmrr_dev(rmrr, pdev);
-			if (ret)
-				printk(KERN_ERR
-				 "IOMMU: mapping reserved region failed\n");
+	if (iommu_pass_through) {
+		ret = init_context_pass_through();
+		if (ret) {
+			printk(KERN_ERR "IOMMU: Pass through init failed.\n");
+			iommu_pass_through = 0;
 		}
 	}
 
-	iommu_prepare_gfx_mapping();
+	/*
+	 * If pass through is not set or not enabled, setup context entries for
+	 * identity mappings for rmrr, gfx, and isa.
+	 */
+	if (!iommu_pass_through) {
+		/*
+		 * For each rmrr
+		 *   for each dev attached to rmrr
+		 *   do
+		 *     locate drhd for dev, alloc domain for dev
+		 *     allocate free domain
+		 *     allocate page table entries for rmrr
+		 *     if context not allocated for bus
+		 *           allocate and init context
+		 *           set present in root table for this bus
+		 *     init context with domain, translation etc
+		 *    endfor
+		 * endfor
+		 */
+		for_each_rmrr_units(rmrr) {
+			for (i = 0; i < rmrr->devices_cnt; i++) {
+				pdev = rmrr->devices[i];
+				/*
+				 * some BIOS lists non-exist devices in DMAR
+				 * table.
+				 */
+				if (!pdev)
+					continue;
+				ret = iommu_prepare_rmrr_dev(rmrr, pdev);
+				if (ret)
+					printk(KERN_ERR
+				 "IOMMU: mapping reserved region failed\n");
+			}
+		}
+
+		iommu_prepare_gfx_mapping();
 
-	iommu_prepare_isa();
+		iommu_prepare_isa();
+	}
 
 	/*
 	 * for each drhd
@@ -2023,10 +2148,8 @@ static int __init init_dmars(void)
 
 		iommu_set_root_entry(iommu);
 
-		iommu->flush.flush_context(iommu, 0, 0, 0, DMA_CCMD_GLOBAL_INVL,
-					   0);
-		iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH,
-					 0);
+		iommu->flush.flush_context(iommu, 0, 0, 0, DMA_CCMD_GLOBAL_INVL);
+		iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH);
 		iommu_disable_protect_mem_regions(iommu);
 
 		ret = iommu_enable_translation(iommu);
@@ -2112,7 +2235,8 @@ get_valid_domain_for_dev(struct pci_dev *pdev)
 
 	/* make sure context mapping is ok */
 	if (unlikely(!domain_context_mapped(pdev))) {
-		ret = domain_context_mapping(domain, pdev);
+		ret = domain_context_mapping(domain, pdev,
+					     CONTEXT_TT_MULTI_LEVEL);
 		if (ret) {
 			printk(KERN_ERR
 				"Domain context map for %s failed",
@@ -2173,10 +2297,11 @@ static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr,
 	if (ret)
 		goto error;
 
-	/* it's a non-present to present mapping */
-	ret = iommu_flush_iotlb_psi(iommu, domain->id,
-			start_paddr, size >> VTD_PAGE_SHIFT, 1);
-	if (ret)
+	/* it's a non-present to present mapping. Only flush if caching mode */
+	if (cap_caching_mode(iommu->cap))
+		iommu_flush_iotlb_psi(iommu, 0, start_paddr,
+				      size >> VTD_PAGE_SHIFT);
+	else
 		iommu_flush_write_buffer(iommu);
 
 	return start_paddr + ((u64)paddr & (~PAGE_MASK));
@@ -2210,15 +2335,22 @@ static void flush_unmaps(void)
 		if (!iommu)
 			continue;
 
-		if (deferred_flush[i].next) {
-			iommu->flush.flush_iotlb(iommu, 0, 0, 0,
-						 DMA_TLB_GLOBAL_FLUSH, 0);
-			for (j = 0; j < deferred_flush[i].next; j++) {
-				__free_iova(&deferred_flush[i].domain[j]->iovad,
-						deferred_flush[i].iova[j]);
-			}
-			deferred_flush[i].next = 0;
+		if (!deferred_flush[i].next)
+			continue;
+
+		iommu->flush.flush_iotlb(iommu, 0, 0, 0,
+					 DMA_TLB_GLOBAL_FLUSH);
+		for (j = 0; j < deferred_flush[i].next; j++) {
+			unsigned long mask;
+			struct iova *iova = deferred_flush[i].iova[j];
+
+			mask = (iova->pfn_hi - iova->pfn_lo + 1) << PAGE_SHIFT;
+			mask = ilog2(mask >> VTD_PAGE_SHIFT);
+			iommu_flush_dev_iotlb(deferred_flush[i].domain[j],
+					iova->pfn_lo << PAGE_SHIFT, mask);
+			__free_iova(&deferred_flush[i].domain[j]->iovad, iova);
 		}
+		deferred_flush[i].next = 0;
 	}
 
 	list_size = 0;
@@ -2291,9 +2423,8 @@ static void intel_unmap_page(struct device *dev, dma_addr_t dev_addr,
 	/* free page tables */
 	dma_pte_free_pagetable(domain, start_addr, start_addr + size);
 	if (intel_iommu_strict) {
-		if (iommu_flush_iotlb_psi(iommu,
-			domain->id, start_addr, size >> VTD_PAGE_SHIFT, 0))
-			iommu_flush_write_buffer(iommu);
+		iommu_flush_iotlb_psi(iommu, domain->id, start_addr,
+				      size >> VTD_PAGE_SHIFT);
 		/* free iova */
 		__free_iova(&domain->iovad, iova);
 	} else {
@@ -2384,9 +2515,8 @@ static void intel_unmap_sg(struct device *hwdev, struct scatterlist *sglist,
 	/* free page tables */
 	dma_pte_free_pagetable(domain, start_addr, start_addr + size);
 
-	if (iommu_flush_iotlb_psi(iommu, domain->id, start_addr,
-			size >> VTD_PAGE_SHIFT, 0))
-		iommu_flush_write_buffer(iommu);
+	iommu_flush_iotlb_psi(iommu, domain->id, start_addr,
+			      size >> VTD_PAGE_SHIFT);
 
 	/* free iova */
 	__free_iova(&domain->iovad, iova);
@@ -2478,10 +2608,13 @@ static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int ne
 		offset += size;
 	}
 
-	/* it's a non-present to present mapping */
-	if (iommu_flush_iotlb_psi(iommu, domain->id,
-			start_addr, offset >> VTD_PAGE_SHIFT, 1))
+	/* it's a non-present to present mapping. Only flush if caching mode */
+	if (cap_caching_mode(iommu->cap))
+		iommu_flush_iotlb_psi(iommu, 0, start_addr,
+				      offset >> VTD_PAGE_SHIFT);
+	else
 		iommu_flush_write_buffer(iommu);
+
 	return nelems;
 }
 
@@ -2640,9 +2773,9 @@ static int init_iommu_hw(void)
 		iommu_set_root_entry(iommu);
 
 		iommu->flush.flush_context(iommu, 0, 0, 0,
-						DMA_CCMD_GLOBAL_INVL, 0);
+					   DMA_CCMD_GLOBAL_INVL);
 		iommu->flush.flush_iotlb(iommu, 0, 0, 0,
-						DMA_TLB_GLOBAL_FLUSH, 0);
+					 DMA_TLB_GLOBAL_FLUSH);
 		iommu_disable_protect_mem_regions(iommu);
 		iommu_enable_translation(iommu);
 	}
@@ -2657,9 +2790,9 @@ static void iommu_flush_all(void)
 
 	for_each_active_iommu(iommu, drhd) {
 		iommu->flush.flush_context(iommu, 0, 0, 0,
-						DMA_CCMD_GLOBAL_INVL, 0);
+					   DMA_CCMD_GLOBAL_INVL);
 		iommu->flush.flush_iotlb(iommu, 0, 0, 0,
-						DMA_TLB_GLOBAL_FLUSH, 0);
+					 DMA_TLB_GLOBAL_FLUSH);
 	}
 }
 
@@ -2782,7 +2915,7 @@ int __init intel_iommu_init(void)
 	 * Check the need for DMA-remapping initialization now.
 	 * Above initialization will also be used by Interrupt-remapping.
 	 */
-	if (no_iommu || swiotlb || dmar_disabled)
+	if (no_iommu || (swiotlb && !iommu_pass_through) || dmar_disabled)
 		return -ENODEV;
 
 	iommu_init_mempool();
@@ -2802,7 +2935,15 @@ int __init intel_iommu_init(void)
 
 	init_timer(&unmap_timer);
 	force_iommu = 1;
-	dma_ops = &intel_dma_ops;
+
+	if (!iommu_pass_through) {
+		printk(KERN_INFO
+		       "Multi-level page-table translation for DMAR.\n");
+		dma_ops = &intel_dma_ops;
+	} else
+		printk(KERN_INFO
+		       "DMAR: Pass through translation for DMAR.\n");
+
 	init_iommu_sysfs();
 
 	register_iommu(&intel_iommu_ops);
@@ -2888,6 +3029,7 @@ static void vm_domain_remove_one_dev_info(struct dmar_domain *domain,
 				info->dev->dev.archdata.iommu = NULL;
 			spin_unlock_irqrestore(&device_domain_lock, flags);
 
+			iommu_disable_dev_iotlb(info);
 			iommu_detach_dev(iommu, info->bus, info->devfn);
 			iommu_detach_dependent_devices(iommu, pdev);
 			free_devinfo_mem(info);
@@ -2938,6 +3080,7 @@ static void vm_domain_remove_all_dev_info(struct dmar_domain *domain)
 
 		spin_unlock_irqrestore(&device_domain_lock, flags1);
 
+		iommu_disable_dev_iotlb(info);
 		iommu = device_to_iommu(info->segment, info->bus, info->devfn);
 		iommu_detach_dev(iommu, info->bus, info->devfn);
 		iommu_detach_dependent_devices(iommu, info->dev);
@@ -3142,11 +3285,11 @@ static int intel_iommu_attach_device(struct iommu_domain *domain,
 		return -EFAULT;
 	}
 
-	ret = domain_context_mapping(dmar_domain, pdev);
+	ret = vm_domain_add_dev_info(dmar_domain, pdev);
 	if (ret)
 		return ret;
 
-	ret = vm_domain_add_dev_info(dmar_domain, pdev);
+	ret = domain_context_mapping(dmar_domain, pdev, CONTEXT_TT_MULTI_LEVEL);
 	return ret;
 }
 
diff --git a/drivers/pci/intr_remapping.c b/drivers/pci/intr_remapping.c
index 3a0cb0bb059..1e83c8c5f98 100644
--- a/drivers/pci/intr_remapping.c
+++ b/drivers/pci/intr_remapping.c
@@ -409,7 +409,7 @@ int free_irte(int irq)
 static void iommu_set_intr_remapping(struct intel_iommu *iommu, int mode)
 {
 	u64 addr;
-	u32 cmd, sts;
+	u32 sts;
 	unsigned long flags;
 
 	addr = virt_to_phys((void *)iommu->ir_table->base);
@@ -420,9 +420,8 @@ static void iommu_set_intr_remapping(struct intel_iommu *iommu, int mode)
 		    (addr) | IR_X2APIC_MODE(mode) | INTR_REMAP_TABLE_REG_SIZE);
 
 	/* Set interrupt-remapping table pointer */
-	cmd = iommu->gcmd | DMA_GCMD_SIRTP;
 	iommu->gcmd |= DMA_GCMD_SIRTP;
-	writel(cmd, iommu->reg + DMAR_GCMD_REG);
+	writel(iommu->gcmd, iommu->reg + DMAR_GCMD_REG);
 
 	IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG,
 		      readl, (sts & DMA_GSTS_IRTPS), sts);
@@ -437,9 +436,8 @@ static void iommu_set_intr_remapping(struct intel_iommu *iommu, int mode)
 	spin_lock_irqsave(&iommu->register_lock, flags);
 
 	/* Enable interrupt-remapping */
-	cmd = iommu->gcmd | DMA_GCMD_IRE;
 	iommu->gcmd |= DMA_GCMD_IRE;
-	writel(cmd, iommu->reg + DMAR_GCMD_REG);
+	writel(iommu->gcmd, iommu->reg + DMAR_GCMD_REG);
 
 	IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG,
 		      readl, (sts & DMA_GSTS_IRES), sts);
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index b497daab3d4..e3a87210e94 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -5,6 +5,7 @@
  *
  * PCI Express I/O Virtualization (IOV) support.
  *   Single Root IOV 1.0
+ *   Address Translation Service 1.0
  */
 
 #include <linux/pci.h>
@@ -110,7 +111,7 @@ static int virtfn_add(struct pci_dev *dev, int id, int reset)
 	}
 
 	if (reset)
-		pci_execute_reset_function(virtfn);
+		__pci_reset_function(virtfn);
 
 	pci_device_add(virtfn, virtfn->bus);
 	mutex_unlock(&iov->dev->sriov->lock);
@@ -164,7 +165,7 @@ static void virtfn_remove(struct pci_dev *dev, int id, int reset)
 
 	if (reset) {
 		device_release_driver(&virtfn->dev);
-		pci_execute_reset_function(virtfn);
+		__pci_reset_function(virtfn);
 	}
 
 	sprintf(buf, "virtfn%u", id);
@@ -487,13 +488,15 @@ found:
 	iov->self = dev;
 	pci_read_config_dword(dev, pos + PCI_SRIOV_CAP, &iov->cap);
 	pci_read_config_byte(dev, pos + PCI_SRIOV_FUNC_LINK, &iov->link);
+	if (dev->pcie_type == PCI_EXP_TYPE_RC_END)
+		iov->link = PCI_DEVFN(PCI_SLOT(dev->devfn), iov->link);
 
 	if (pdev)
 		iov->dev = pci_dev_get(pdev);
-	else {
+	else
 		iov->dev = dev;
-		mutex_init(&iov->lock);
-	}
+
+	mutex_init(&iov->lock);
 
 	dev->sriov = iov;
 	dev->is_physfn = 1;
@@ -513,11 +516,11 @@ static void sriov_release(struct pci_dev *dev)
 {
 	BUG_ON(dev->sriov->nr_virtfn);
 
-	if (dev == dev->sriov->dev)
-		mutex_destroy(&dev->sriov->lock);
-	else
+	if (dev != dev->sriov->dev)
 		pci_dev_put(dev->sriov->dev);
 
+	mutex_destroy(&dev->sriov->lock);
+
 	kfree(dev->sriov);
 	dev->sriov = NULL;
 }
@@ -679,3 +682,145 @@ irqreturn_t pci_sriov_migration(struct pci_dev *dev)
 	return sriov_migration(dev) ? IRQ_HANDLED : IRQ_NONE;
 }
 EXPORT_SYMBOL_GPL(pci_sriov_migration);
+
+static int ats_alloc_one(struct pci_dev *dev, int ps)
+{
+	int pos;
+	u16 cap;
+	struct pci_ats *ats;
+
+	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ATS);
+	if (!pos)
+		return -ENODEV;
+
+	ats = kzalloc(sizeof(*ats), GFP_KERNEL);
+	if (!ats)
+		return -ENOMEM;
+
+	ats->pos = pos;
+	ats->stu = ps;
+	pci_read_config_word(dev, pos + PCI_ATS_CAP, &cap);
+	ats->qdep = PCI_ATS_CAP_QDEP(cap) ? PCI_ATS_CAP_QDEP(cap) :
+					    PCI_ATS_MAX_QDEP;
+	dev->ats = ats;
+
+	return 0;
+}
+
+static void ats_free_one(struct pci_dev *dev)
+{
+	kfree(dev->ats);
+	dev->ats = NULL;
+}
+
+/**
+ * pci_enable_ats - enable the ATS capability
+ * @dev: the PCI device
+ * @ps: the IOMMU page shift
+ *
+ * Returns 0 on success, or negative on failure.
+ */
+int pci_enable_ats(struct pci_dev *dev, int ps)
+{
+	int rc;
+	u16 ctrl;
+
+	BUG_ON(dev->ats && dev->ats->is_enabled);
+
+	if (ps < PCI_ATS_MIN_STU)
+		return -EINVAL;
+
+	if (dev->is_physfn || dev->is_virtfn) {
+		struct pci_dev *pdev = dev->is_physfn ? dev : dev->physfn;
+
+		mutex_lock(&pdev->sriov->lock);
+		if (pdev->ats)
+			rc = pdev->ats->stu == ps ? 0 : -EINVAL;
+		else
+			rc = ats_alloc_one(pdev, ps);
+
+		if (!rc)
+			pdev->ats->ref_cnt++;
+		mutex_unlock(&pdev->sriov->lock);
+		if (rc)
+			return rc;
+	}
+
+	if (!dev->is_physfn) {
+		rc = ats_alloc_one(dev, ps);
+		if (rc)
+			return rc;
+	}
+
+	ctrl = PCI_ATS_CTRL_ENABLE;
+	if (!dev->is_virtfn)
+		ctrl |= PCI_ATS_CTRL_STU(ps - PCI_ATS_MIN_STU);
+	pci_write_config_word(dev, dev->ats->pos + PCI_ATS_CTRL, ctrl);
+
+	dev->ats->is_enabled = 1;
+
+	return 0;
+}
+
+/**
+ * pci_disable_ats - disable the ATS capability
+ * @dev: the PCI device
+ */
+void pci_disable_ats(struct pci_dev *dev)
+{
+	u16 ctrl;
+
+	BUG_ON(!dev->ats || !dev->ats->is_enabled);
+
+	pci_read_config_word(dev, dev->ats->pos + PCI_ATS_CTRL, &ctrl);
+	ctrl &= ~PCI_ATS_CTRL_ENABLE;
+	pci_write_config_word(dev, dev->ats->pos + PCI_ATS_CTRL, ctrl);
+
+	dev->ats->is_enabled = 0;
+
+	if (dev->is_physfn || dev->is_virtfn) {
+		struct pci_dev *pdev = dev->is_physfn ? dev : dev->physfn;
+
+		mutex_lock(&pdev->sriov->lock);
+		pdev->ats->ref_cnt--;
+		if (!pdev->ats->ref_cnt)
+			ats_free_one(pdev);
+		mutex_unlock(&pdev->sriov->lock);
+	}
+
+	if (!dev->is_physfn)
+		ats_free_one(dev);
+}
+
+/**
+ * pci_ats_queue_depth - query the ATS Invalidate Queue Depth
+ * @dev: the PCI device
+ *
+ * Returns the queue depth on success, or negative on failure.
+ *
+ * The ATS spec uses 0 in the Invalidate Queue Depth field to
+ * indicate that the function can accept 32 Invalidate Request.
+ * But here we use the `real' values (i.e. 1~32) for the Queue
+ * Depth; and 0 indicates the function shares the Queue with
+ * other functions (doesn't exclusively own a Queue).
+ */
+int pci_ats_queue_depth(struct pci_dev *dev)
+{
+	int pos;
+	u16 cap;
+
+	if (dev->is_virtfn)
+		return 0;
+
+	if (dev->ats)
+		return dev->ats->qdep;
+
+	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ATS);
+	if (!pos)
+		return -ENODEV;
+
+	pci_read_config_word(dev, pos + PCI_ATS_CAP, &cap);
+
+	return PCI_ATS_CAP_QDEP(cap) ? PCI_ATS_CAP_QDEP(cap) :
+				       PCI_ATS_MAX_QDEP;
+}
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 362773247fb..d9f06fbfa0b 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -75,22 +75,17 @@ void arch_teardown_msi_irqs(struct pci_dev *dev)
 }
 #endif
 
-static void __msi_set_enable(struct pci_dev *dev, int pos, int enable)
+static void msi_set_enable(struct pci_dev *dev, int pos, int enable)
 {
 	u16 control;
 
-	if (pos) {
-		pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control);
-		control &= ~PCI_MSI_FLAGS_ENABLE;
-		if (enable)
-			control |= PCI_MSI_FLAGS_ENABLE;
-		pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control);
-	}
-}
+	BUG_ON(!pos);
 
-static void msi_set_enable(struct pci_dev *dev, int enable)
-{
-	__msi_set_enable(dev, pci_find_capability(dev, PCI_CAP_ID_MSI), enable);
+	pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control);
+	control &= ~PCI_MSI_FLAGS_ENABLE;
+	if (enable)
+		control |= PCI_MSI_FLAGS_ENABLE;
+	pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control);
 }
 
 static void msix_set_enable(struct pci_dev *dev, int enable)
@@ -131,9 +126,6 @@ static inline __attribute_const__ u32 msi_enabled_mask(u16 control)
  * mask all MSI interrupts by clearing the MSI enable bit does not work
  * reliably as devices without an INTx disable bit will then generate a
  * level IRQ which will never be cleared.
- *
- * Returns 1 if it succeeded in masking the interrupt and 0 if the device
- * doesn't support MSI masking.
  */
 static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
 {
@@ -303,7 +295,7 @@ static void __pci_restore_msi_state(struct pci_dev *dev)
 	pos = entry->msi_attrib.pos;
 
 	pci_intx_for_msi(dev, 0);
-	msi_set_enable(dev, 0);
+	msi_set_enable(dev, pos, 0);
 	write_msi_msg(dev->irq, &entry->msg);
 
 	pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control);
@@ -321,22 +313,22 @@ static void __pci_restore_msix_state(struct pci_dev *dev)
 
 	if (!dev->msix_enabled)
 		return;
+	BUG_ON(list_empty(&dev->msi_list));
+	entry = list_entry(dev->msi_list.next, struct msi_desc, list);
+	pos = entry->msi_attrib.pos;
+	pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control);
 
 	/* route the table */
 	pci_intx_for_msi(dev, 0);
-	msix_set_enable(dev, 0);
+	control |= PCI_MSIX_FLAGS_ENABLE | PCI_MSIX_FLAGS_MASKALL;
+	pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control);
 
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		write_msi_msg(entry->irq, &entry->msg);
 		msix_mask_irq(entry, entry->masked);
 	}
 
-	BUG_ON(list_empty(&dev->msi_list));
-	entry = list_entry(dev->msi_list.next, struct msi_desc, list);
-	pos = entry->msi_attrib.pos;
-	pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control);
 	control &= ~PCI_MSIX_FLAGS_MASKALL;
-	control |= PCI_MSIX_FLAGS_ENABLE;
 	pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control);
 }
 
@@ -365,9 +357,9 @@ static int msi_capability_init(struct pci_dev *dev, int nvec)
 	u16 control;
 	unsigned mask;
 
-	msi_set_enable(dev, 0);	/* Ensure msi is disabled as I set it up */
-
    	pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
+	msi_set_enable(dev, pos, 0);	/* Disable MSI during set up */
+
 	pci_read_config_word(dev, msi_control_reg(pos), &control);
 	/* MSI Entry Initialization */
 	entry = alloc_msi_entry(dev);
@@ -381,7 +373,7 @@ static int msi_capability_init(struct pci_dev *dev, int nvec)
 	entry->msi_attrib.default_irq = dev->irq;	/* Save IOAPIC IRQ */
 	entry->msi_attrib.pos = pos;
 
-	entry->mask_pos = msi_mask_bits_reg(pos, entry->msi_attrib.is_64);
+	entry->mask_pos = msi_mask_reg(pos, entry->msi_attrib.is_64);
 	/* All MSIs are unmasked by default, Mask them all */
 	if (entry->msi_attrib.maskbit)
 		pci_read_config_dword(dev, entry->mask_pos, &entry->masked);
@@ -399,7 +391,7 @@ static int msi_capability_init(struct pci_dev *dev, int nvec)
 
 	/* Set MSI enabled bits	 */
 	pci_intx_for_msi(dev, 0);
-	msi_set_enable(dev, 1);
+	msi_set_enable(dev, pos, 1);
 	dev->msi_enabled = 1;
 
 	dev->irq = entry->irq;
@@ -427,11 +419,14 @@ static int msix_capability_init(struct pci_dev *dev,
 	u8 bir;
 	void __iomem *base;
 
-	msix_set_enable(dev, 0);/* Ensure msix is disabled as I set it up */
-
    	pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
+	pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control);
+
+	/* Ensure MSI-X is disabled while it is set up */
+	control &= ~PCI_MSIX_FLAGS_ENABLE;
+	pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control);
+
 	/* Request & Map MSI-X table region */
- 	pci_read_config_word(dev, msi_control_reg(pos), &control);
 	nr_entries = multi_msix_capable(control);
 
  	pci_read_config_dword(dev, msix_table_offset_reg(pos), &table_offset);
@@ -442,7 +437,6 @@ static int msix_capability_init(struct pci_dev *dev,
 	if (base == NULL)
 		return -ENOMEM;
 
-	/* MSI-X Table Initialization */
 	for (i = 0; i < nvec; i++) {
 		entry = alloc_msi_entry(dev);
 		if (!entry)
@@ -455,7 +449,6 @@ static int msix_capability_init(struct pci_dev *dev,
 		entry->msi_attrib.default_irq = dev->irq;
 		entry->msi_attrib.pos = pos;
 		entry->mask_base = base;
-		msix_mask_irq(entry, 1);
 
 		list_add_tail(&entry->list, &dev->msi_list);
 	}
@@ -480,22 +473,31 @@ static int msix_capability_init(struct pci_dev *dev,
 		return ret;
 	}
 
+	/*
+	 * Some devices require MSI-X to be enabled before we can touch the
+	 * MSI-X registers.  We need to mask all the vectors to prevent
+	 * interrupts coming in before they're fully set up.
+	 */
+	control |= PCI_MSIX_FLAGS_MASKALL | PCI_MSIX_FLAGS_ENABLE;
+	pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control);
+
 	i = 0;
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		entries[i].vector = entry->irq;
 		set_irq_msi(entry->irq, entry);
+		j = entries[i].entry;
+		entry->masked = readl(base + j * PCI_MSIX_ENTRY_SIZE +
+					PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET);
+		msix_mask_irq(entry, 1);
 		i++;
 	}
-	/* Set MSI-X enabled bits */
+
+	/* Set MSI-X enabled bits and unmask the function */
 	pci_intx_for_msi(dev, 0);
-	msix_set_enable(dev, 1);
 	dev->msix_enabled = 1;
 
-	list_for_each_entry(entry, &dev->msi_list, list) {
-		int vector = entry->msi_attrib.entry_nr;
-		entry->masked = readl(base + vector * PCI_MSIX_ENTRY_SIZE +
-					PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET);
-	}
+	control &= ~PCI_MSIX_FLAGS_MASKALL;
+	pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control);
 
 	return 0;
 }
@@ -596,17 +598,20 @@ void pci_msi_shutdown(struct pci_dev *dev)
 	struct msi_desc *desc;
 	u32 mask;
 	u16 ctrl;
+	unsigned pos;
 
 	if (!pci_msi_enable || !dev || !dev->msi_enabled)
 		return;
 
-	msi_set_enable(dev, 0);
+	BUG_ON(list_empty(&dev->msi_list));
+	desc = list_first_entry(&dev->msi_list, struct msi_desc, list);
+	pos = desc->msi_attrib.pos;
+
+	msi_set_enable(dev, pos, 0);
 	pci_intx_for_msi(dev, 1);
 	dev->msi_enabled = 0;
 
-	BUG_ON(list_empty(&dev->msi_list));
-	desc = list_first_entry(&dev->msi_list, struct msi_desc, list);
-	pci_read_config_word(dev, desc->msi_attrib.pos + PCI_MSI_FLAGS, &ctrl);
+	pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &ctrl);
 	mask = msi_capable_mask(ctrl);
 	msi_mask_irq(desc, mask, ~mask);
 
@@ -648,10 +653,7 @@ static int msi_free_irqs(struct pci_dev* dev)
 
 	list_for_each_entry_safe(entry, tmp, &dev->msi_list, list) {
 		if (entry->msi_attrib.is_msix) {
-			writel(1, entry->mask_base + entry->msi_attrib.entry_nr
-				  * PCI_MSIX_ENTRY_SIZE
-				  + PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET);
-
+			msix_mask_irq(entry, 1);
 			if (list_is_last(&entry->list, &dev->msi_list))
 				iounmap(entry->mask_base);
 		}
@@ -691,8 +693,8 @@ int pci_msix_table_size(struct pci_dev *dev)
  * indicates the successful configuration of MSI-X capability structure
  * with new allocated MSI-X irqs. A return of < 0 indicates a failure.
  * Or a return of > 0 indicates that driver request is exceeding the number
- * of irqs available. Driver should use the returned value to re-send
- * its request.
+ * of irqs or MSI-X vectors available. Driver should use the returned value to
+ * re-send its request.
  **/
 int pci_enable_msix(struct pci_dev* dev, struct msix_entry *entries, int nvec)
 {
@@ -708,7 +710,7 @@ int pci_enable_msix(struct pci_dev* dev, struct msix_entry *entries, int nvec)
 
 	nr_entries = pci_msix_table_size(dev);
 	if (nvec > nr_entries)
-		return -EINVAL;
+		return nr_entries;
 
 	/* Check for any invalid entries */
 	for (i = 0; i < nvec; i++) {
diff --git a/drivers/pci/msi.h b/drivers/pci/msi.h
index 71f4df2ef65..a0662842550 100644
--- a/drivers/pci/msi.h
+++ b/drivers/pci/msi.h
@@ -16,21 +16,15 @@
 #define msi_lower_address_reg(base)	(base + PCI_MSI_ADDRESS_LO)
 #define msi_upper_address_reg(base)	(base + PCI_MSI_ADDRESS_HI)
 #define msi_data_reg(base, is64bit)	\
-	( (is64bit == 1) ? base+PCI_MSI_DATA_64 : base+PCI_MSI_DATA_32 )
-#define msi_mask_bits_reg(base, is64bit) \
-	( (is64bit == 1) ? base+PCI_MSI_MASK_BIT : base+PCI_MSI_MASK_BIT-4)
-#define msi_disable(control)		control &= ~PCI_MSI_FLAGS_ENABLE
+	(base + ((is64bit == 1) ? PCI_MSI_DATA_64 : PCI_MSI_DATA_32))
+#define msi_mask_reg(base, is64bit)	\
+	(base + ((is64bit == 1) ? PCI_MSI_MASK_64 : PCI_MSI_MASK_32))
 #define is_64bit_address(control)	(!!(control & PCI_MSI_FLAGS_64BIT))
 #define is_mask_bit_support(control)	(!!(control & PCI_MSI_FLAGS_MASKBIT))
 
 #define msix_table_offset_reg(base)	(base + 0x04)
 #define msix_pba_offset_reg(base)	(base + 0x08)
-#define msix_enable(control)	 	control |= PCI_MSIX_FLAGS_ENABLE
-#define msix_disable(control)	 	control &= ~PCI_MSIX_FLAGS_ENABLE
 #define msix_table_size(control) 	((control & PCI_MSIX_FLAGS_QSIZE)+1)
-#define multi_msix_capable		msix_table_size
-#define msix_unmask(address)	 	(address & ~PCI_MSIX_FLAGS_BITMASK)
-#define msix_mask(address)		(address | PCI_MSIX_FLAGS_BITMASK)
-#define msix_is_pending(address) 	(address & PCI_MSIX_FLAGS_PENDMASK)
+#define multi_msix_capable(control)	msix_table_size((control))
 
 #endif /* MSI_H */
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 07bbb9b3b93..6c93af5ced1 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -485,6 +485,8 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
 		pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
 		pmcsr |= state;
 		break;
+	case PCI_D3hot:
+	case PCI_D3cold:
 	case PCI_UNKNOWN: /* Boot-up */
 		if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot
 		 && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
@@ -1208,7 +1210,7 @@ void pci_pme_active(struct pci_dev *dev, bool enable)
  * Error code depending on the platform is returned if both the platform and
  * the native mechanism fail to enable the generation of wake-up events
  */
-int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable)
+int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable)
 {
 	int error = 0;
 	bool pme_done = false;
@@ -1287,15 +1289,14 @@ pci_power_t pci_target_state(struct pci_dev *dev)
 		default:
 			target_state = state;
 		}
+	} else if (!dev->pm_cap) {
+		target_state = PCI_D0;
 	} else if (device_may_wakeup(&dev->dev)) {
 		/*
 		 * Find the deepest state from which the device can generate
 		 * wake-up events, make it the target state and enable device
 		 * to generate PME#.
 		 */
-		if (!dev->pm_cap)
-			return PCI_POWER_ERROR;
-
 		if (dev->pme_support) {
 			while (target_state
 			      && !(dev->pme_support & (1 << target_state)))
@@ -1532,7 +1533,7 @@ pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge)
 	if (!pin)
 		return -1;
 
-	while (dev->bus->parent) {
+	while (!pci_is_root_bus(dev->bus)) {
 		pin = pci_swizzle_interrupt_pin(dev, pin);
 		dev = dev->bus->self;
 	}
@@ -1552,7 +1553,7 @@ u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp)
 {
 	u8 pin = *pinp;
 
-	while (dev->bus->parent) {
+	while (!pci_is_root_bus(dev->bus)) {
 		pin = pci_swizzle_interrupt_pin(dev, pin);
 		dev = dev->bus->self;
 	}
@@ -2058,111 +2059,177 @@ int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask)
 EXPORT_SYMBOL(pci_set_dma_seg_boundary);
 #endif
 
-static int __pcie_flr(struct pci_dev *dev, int probe)
+static int pcie_flr(struct pci_dev *dev, int probe)
 {
-	u16 status;
+	int i;
+	int pos;
 	u32 cap;
-	int exppos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+	u16 status;
 
-	if (!exppos)
+	pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+	if (!pos)
 		return -ENOTTY;
-	pci_read_config_dword(dev, exppos + PCI_EXP_DEVCAP, &cap);
+
+	pci_read_config_dword(dev, pos + PCI_EXP_DEVCAP, &cap);
 	if (!(cap & PCI_EXP_DEVCAP_FLR))
 		return -ENOTTY;
 
 	if (probe)
 		return 0;
 
-	pci_block_user_cfg_access(dev);
-
 	/* Wait for Transaction Pending bit clean */
-	pci_read_config_word(dev, exppos + PCI_EXP_DEVSTA, &status);
-	if (!(status & PCI_EXP_DEVSTA_TRPND))
-		goto transaction_done;
+	for (i = 0; i < 4; i++) {
+		if (i)
+			msleep((1 << (i - 1)) * 100);
 
-	msleep(100);
-	pci_read_config_word(dev, exppos + PCI_EXP_DEVSTA, &status);
-	if (!(status & PCI_EXP_DEVSTA_TRPND))
-		goto transaction_done;
-
-	dev_info(&dev->dev, "Busy after 100ms while trying to reset; "
-			"sleeping for 1 second\n");
-	ssleep(1);
-	pci_read_config_word(dev, exppos + PCI_EXP_DEVSTA, &status);
-	if (status & PCI_EXP_DEVSTA_TRPND)
-		dev_info(&dev->dev, "Still busy after 1s; "
-				"proceeding with reset anyway\n");
-
-transaction_done:
-	pci_write_config_word(dev, exppos + PCI_EXP_DEVCTL,
+		pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &status);
+		if (!(status & PCI_EXP_DEVSTA_TRPND))
+			goto clear;
+	}
+
+	dev_err(&dev->dev, "transaction is not cleared; "
+			"proceeding with reset anyway\n");
+
+clear:
+	pci_write_config_word(dev, pos + PCI_EXP_DEVCTL,
 				PCI_EXP_DEVCTL_BCR_FLR);
-	mdelay(100);
+	msleep(100);
 
-	pci_unblock_user_cfg_access(dev);
 	return 0;
 }
 
-static int __pci_af_flr(struct pci_dev *dev, int probe)
+static int pci_af_flr(struct pci_dev *dev, int probe)
 {
-	int cappos = pci_find_capability(dev, PCI_CAP_ID_AF);
-	u8 status;
+	int i;
+	int pos;
 	u8 cap;
+	u8 status;
 
-	if (!cappos)
+	pos = pci_find_capability(dev, PCI_CAP_ID_AF);
+	if (!pos)
 		return -ENOTTY;
-	pci_read_config_byte(dev, cappos + PCI_AF_CAP, &cap);
+
+	pci_read_config_byte(dev, pos + PCI_AF_CAP, &cap);
 	if (!(cap & PCI_AF_CAP_TP) || !(cap & PCI_AF_CAP_FLR))
 		return -ENOTTY;
 
 	if (probe)
 		return 0;
 
-	pci_block_user_cfg_access(dev);
-
 	/* Wait for Transaction Pending bit clean */
-	pci_read_config_byte(dev, cappos + PCI_AF_STATUS, &status);
-	if (!(status & PCI_AF_STATUS_TP))
-		goto transaction_done;
+	for (i = 0; i < 4; i++) {
+		if (i)
+			msleep((1 << (i - 1)) * 100);
+
+		pci_read_config_byte(dev, pos + PCI_AF_STATUS, &status);
+		if (!(status & PCI_AF_STATUS_TP))
+			goto clear;
+	}
 
+	dev_err(&dev->dev, "transaction is not cleared; "
+			"proceeding with reset anyway\n");
+
+clear:
+	pci_write_config_byte(dev, pos + PCI_AF_CTRL, PCI_AF_CTRL_FLR);
 	msleep(100);
-	pci_read_config_byte(dev, cappos + PCI_AF_STATUS, &status);
-	if (!(status & PCI_AF_STATUS_TP))
-		goto transaction_done;
-
-	dev_info(&dev->dev, "Busy after 100ms while trying to"
-			" reset; sleeping for 1 second\n");
-	ssleep(1);
-	pci_read_config_byte(dev, cappos + PCI_AF_STATUS, &status);
-	if (status & PCI_AF_STATUS_TP)
-		dev_info(&dev->dev, "Still busy after 1s; "
-				"proceeding with reset anyway\n");
-
-transaction_done:
-	pci_write_config_byte(dev, cappos + PCI_AF_CTRL, PCI_AF_CTRL_FLR);
-	mdelay(100);
-
-	pci_unblock_user_cfg_access(dev);
+
 	return 0;
 }
 
-static int __pci_reset_function(struct pci_dev *pdev, int probe)
+static int pci_pm_reset(struct pci_dev *dev, int probe)
 {
-	int res;
+	u16 csr;
+
+	if (!dev->pm_cap)
+		return -ENOTTY;
 
-	res = __pcie_flr(pdev, probe);
-	if (res != -ENOTTY)
-		return res;
+	pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &csr);
+	if (csr & PCI_PM_CTRL_NO_SOFT_RESET)
+		return -ENOTTY;
 
-	res = __pci_af_flr(pdev, probe);
-	if (res != -ENOTTY)
-		return res;
+	if (probe)
+		return 0;
 
-	return res;
+	if (dev->current_state != PCI_D0)
+		return -EINVAL;
+
+	csr &= ~PCI_PM_CTRL_STATE_MASK;
+	csr |= PCI_D3hot;
+	pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr);
+	msleep(pci_pm_d3_delay);
+
+	csr &= ~PCI_PM_CTRL_STATE_MASK;
+	csr |= PCI_D0;
+	pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr);
+	msleep(pci_pm_d3_delay);
+
+	return 0;
+}
+
+static int pci_parent_bus_reset(struct pci_dev *dev, int probe)
+{
+	u16 ctrl;
+	struct pci_dev *pdev;
+
+	if (dev->subordinate)
+		return -ENOTTY;
+
+	list_for_each_entry(pdev, &dev->bus->devices, bus_list)
+		if (pdev != dev)
+			return -ENOTTY;
+
+	if (probe)
+		return 0;
+
+	pci_read_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, &ctrl);
+	ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
+	pci_write_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, ctrl);
+	msleep(100);
+
+	ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
+	pci_write_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, ctrl);
+	msleep(100);
+
+	return 0;
+}
+
+static int pci_dev_reset(struct pci_dev *dev, int probe)
+{
+	int rc;
+
+	might_sleep();
+
+	if (!probe) {
+		pci_block_user_cfg_access(dev);
+		/* block PM suspend, driver probe, etc. */
+		down(&dev->dev.sem);
+	}
+
+	rc = pcie_flr(dev, probe);
+	if (rc != -ENOTTY)
+		goto done;
+
+	rc = pci_af_flr(dev, probe);
+	if (rc != -ENOTTY)
+		goto done;
+
+	rc = pci_pm_reset(dev, probe);
+	if (rc != -ENOTTY)
+		goto done;
+
+	rc = pci_parent_bus_reset(dev, probe);
+done:
+	if (!probe) {
+		up(&dev->dev.sem);
+		pci_unblock_user_cfg_access(dev);
+	}
+
+	return rc;
 }
 
 /**
- * pci_execute_reset_function() - Reset a PCI device function
- * @dev: Device function to reset
+ * __pci_reset_function - reset a PCI device function
+ * @dev: PCI device to reset
  *
  * Some devices allow an individual function to be reset without affecting
  * other functions in the same device.  The PCI device must be responsive
@@ -2174,18 +2241,18 @@ static int __pci_reset_function(struct pci_dev *pdev, int probe)
  * device including MSI, bus mastering, BARs, decoding IO and memory spaces,
  * etc.
  *
- * Returns 0 if the device function was successfully reset or -ENOTTY if the
+ * Returns 0 if the device function was successfully reset or negative if the
  * device doesn't support resetting a single function.
  */
-int pci_execute_reset_function(struct pci_dev *dev)
+int __pci_reset_function(struct pci_dev *dev)
 {
-	return __pci_reset_function(dev, 0);
+	return pci_dev_reset(dev, 0);
 }
-EXPORT_SYMBOL_GPL(pci_execute_reset_function);
+EXPORT_SYMBOL_GPL(__pci_reset_function);
 
 /**
- * pci_reset_function() - quiesce and reset a PCI device function
- * @dev: Device function to reset
+ * pci_reset_function - quiesce and reset a PCI device function
+ * @dev: PCI device to reset
  *
  * Some devices allow an individual function to be reset without affecting
  * other functions in the same device.  The PCI device must be responsive
@@ -2193,32 +2260,33 @@ EXPORT_SYMBOL_GPL(pci_execute_reset_function);
  *
  * This function does not just reset the PCI portion of a device, but
  * clears all the state associated with the device.  This function differs
- * from pci_execute_reset_function in that it saves and restores device state
+ * from __pci_reset_function in that it saves and restores device state
  * over the reset.
  *
- * Returns 0 if the device function was successfully reset or -ENOTTY if the
+ * Returns 0 if the device function was successfully reset or negative if the
  * device doesn't support resetting a single function.
  */
 int pci_reset_function(struct pci_dev *dev)
 {
-	int r = __pci_reset_function(dev, 1);
+	int rc;
 
-	if (r < 0)
-		return r;
+	rc = pci_dev_reset(dev, 1);
+	if (rc)
+		return rc;
 
-	if (!dev->msi_enabled && !dev->msix_enabled && dev->irq != 0)
-		disable_irq(dev->irq);
 	pci_save_state(dev);
 
+	/*
+	 * both INTx and MSI are disabled after the Interrupt Disable bit
+	 * is set and the Bus Master bit is cleared.
+	 */
 	pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
 
-	r = pci_execute_reset_function(dev);
+	rc = pci_dev_reset(dev, 0);
 
 	pci_restore_state(dev);
-	if (!dev->msi_enabled && !dev->msix_enabled && dev->irq != 0)
-		enable_irq(dev->irq);
 
-	return r;
+	return rc;
 }
 EXPORT_SYMBOL_GPL(pci_reset_function);
 
@@ -2591,6 +2659,8 @@ static int __init pci_setup(char *str)
 			} else if (!strncmp(str, "resource_alignment=", 19)) {
 				pci_set_resource_alignment_param(str + 19,
 							strlen(str + 19));
+			} else if (!strncmp(str, "ecrc=", 5)) {
+				pcie_ecrc_get_policy(str + 5);
 			} else {
 				printk(KERN_ERR "PCI: Unknown option `%s'\n",
 						str);
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index d03f6b99f29..f73bcbedf37 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -229,6 +229,15 @@ struct pci_sriov {
 	u8 __iomem *mstate;	/* VF Migration State Array */
 };
 
+/* Address Translation Service */
+struct pci_ats {
+	int pos;	/* capability position */
+	int stu;	/* Smallest Translation Unit */
+	int qdep;	/* Invalidate Queue Depth */
+	int ref_cnt;	/* Physical Function reference count */
+	int is_enabled:1;	/* Enable bit is set */
+};
+
 #ifdef CONFIG_PCI_IOV
 extern int pci_iov_init(struct pci_dev *dev);
 extern void pci_iov_release(struct pci_dev *dev);
@@ -236,6 +245,20 @@ extern int pci_iov_resource_bar(struct pci_dev *dev, int resno,
 				enum pci_bar_type *type);
 extern void pci_restore_iov_state(struct pci_dev *dev);
 extern int pci_iov_bus_range(struct pci_bus *bus);
+
+extern int pci_enable_ats(struct pci_dev *dev, int ps);
+extern void pci_disable_ats(struct pci_dev *dev);
+extern int pci_ats_queue_depth(struct pci_dev *dev);
+/**
+ * pci_ats_enabled - query the ATS status
+ * @dev: the PCI device
+ *
+ * Returns 1 if ATS capability is enabled, or 0 if not.
+ */
+static inline int pci_ats_enabled(struct pci_dev *dev)
+{
+	return dev->ats && dev->ats->is_enabled;
+}
 #else
 static inline int pci_iov_init(struct pci_dev *dev)
 {
@@ -257,6 +280,22 @@ static inline int pci_iov_bus_range(struct pci_bus *bus)
 {
 	return 0;
 }
+
+static inline int pci_enable_ats(struct pci_dev *dev, int ps)
+{
+	return -ENODEV;
+}
+static inline void pci_disable_ats(struct pci_dev *dev)
+{
+}
+static inline int pci_ats_queue_depth(struct pci_dev *dev)
+{
+	return -ENODEV;
+}
+static inline int pci_ats_enabled(struct pci_dev *dev)
+{
+	return 0;
+}
 #endif /* CONFIG_PCI_IOV */
 
 #endif /* DRIVERS_PCI_H */
diff --git a/drivers/pci/pcie/aer/Kconfig b/drivers/pci/pcie/aer/Kconfig
index c3bde588aa1..50e94e02378 100644
--- a/drivers/pci/pcie/aer/Kconfig
+++ b/drivers/pci/pcie/aer/Kconfig
@@ -10,3 +10,18 @@ config PCIEAER
 	  This enables PCI Express Root Port Advanced Error Reporting
 	  (AER) driver support. Error reporting messages sent to Root
 	  Port will be handled by PCI Express AER driver.
+
+
+#
+# PCI Express ECRC
+#
+config PCIE_ECRC
+	bool "PCI Express ECRC settings control"
+	depends on PCIEAER
+	help
+	  Used to override firmware/bios settings for PCI Express ECRC
+	  (transaction layer end-to-end CRC checking).
+
+	  When in doubt, say N.
+
+source "drivers/pci/pcie/aer/Kconfig.debug"
diff --git a/drivers/pci/pcie/aer/Kconfig.debug b/drivers/pci/pcie/aer/Kconfig.debug
new file mode 100644
index 00000000000..b8c925c1f6a
--- /dev/null
+++ b/drivers/pci/pcie/aer/Kconfig.debug
@@ -0,0 +1,18 @@
+#
+# PCI Express Root Port Device AER Debug Configuration
+#
+
+config PCIEAER_INJECT
+	tristate "PCIE AER error injector support"
+	depends on PCIEAER
+	default n
+	help
+	  This enables PCI Express Root Port Advanced Error Reporting
+	  (AER) software error injector.
+
+	  Debuging PCIE AER code is quite difficult because it is hard
+	  to trigger various real hardware errors. Software based
+	  error injection can fake almost all kinds of errors with the
+	  help of a user space helper tool aer-inject, which can be
+	  gotten from:
+	     http://www.kernel.org/pub/linux/utils/pci/aer-inject/
diff --git a/drivers/pci/pcie/aer/Makefile b/drivers/pci/pcie/aer/Makefile
index 8da3bd8455a..2cba67510dc 100644
--- a/drivers/pci/pcie/aer/Makefile
+++ b/drivers/pci/pcie/aer/Makefile
@@ -4,6 +4,9 @@
 
 obj-$(CONFIG_PCIEAER) += aerdriver.o
 
+obj-$(CONFIG_PCIE_ECRC)	+= ecrc.o
+
 aerdriver-objs := aerdrv_errprint.o aerdrv_core.o aerdrv.o
 aerdriver-$(CONFIG_ACPI) += aerdrv_acpi.o
 
+obj-$(CONFIG_PCIEAER_INJECT) += aer_inject.o
diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c
new file mode 100644
index 00000000000..d92ae21a59d
--- /dev/null
+++ b/drivers/pci/pcie/aer/aer_inject.c
@@ -0,0 +1,473 @@
+/*
+ * PCIE AER software error injection support.
+ *
+ * Debuging PCIE AER code is quite difficult because it is hard to
+ * trigger various real hardware errors. Software based error
+ * injection can fake almost all kinds of errors with the help of a
+ * user space helper tool aer-inject, which can be gotten from:
+ *   http://www.kernel.org/pub/linux/utils/pci/aer-inject/
+ *
+ * Copyright 2009 Intel Corporation.
+ *     Huang Ying <ying.huang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/miscdevice.h>
+#include <linux/pci.h>
+#include <linux/fs.h>
+#include <asm/uaccess.h>
+#include "aerdrv.h"
+
+struct aer_error_inj
+{
+	u8 bus;
+	u8 dev;
+	u8 fn;
+	u32 uncor_status;
+	u32 cor_status;
+	u32 header_log0;
+	u32 header_log1;
+	u32 header_log2;
+	u32 header_log3;
+};
+
+struct aer_error
+{
+	struct list_head list;
+	unsigned int bus;
+	unsigned int devfn;
+	int pos_cap_err;
+
+	u32 uncor_status;
+	u32 cor_status;
+	u32 header_log0;
+	u32 header_log1;
+	u32 header_log2;
+	u32 header_log3;
+	u32 root_status;
+	u32 source_id;
+};
+
+struct pci_bus_ops
+{
+	struct list_head list;
+	struct pci_bus *bus;
+	struct pci_ops *ops;
+};
+
+static LIST_HEAD(einjected);
+
+static LIST_HEAD(pci_bus_ops_list);
+
+/* Protect einjected and pci_bus_ops_list */
+static DEFINE_SPINLOCK(inject_lock);
+
+static void aer_error_init(struct aer_error *err, unsigned int bus,
+			   unsigned int devfn, int pos_cap_err)
+{
+	INIT_LIST_HEAD(&err->list);
+	err->bus = bus;
+	err->devfn = devfn;
+	err->pos_cap_err = pos_cap_err;
+}
+
+/* inject_lock must be held before calling */
+static struct aer_error *__find_aer_error(unsigned int bus, unsigned int devfn)
+{
+	struct aer_error *err;
+
+	list_for_each_entry(err, &einjected, list) {
+		if (bus == err->bus && devfn == err->devfn)
+			return err;
+	}
+	return NULL;
+}
+
+/* inject_lock must be held before calling */
+static struct aer_error *__find_aer_error_by_dev(struct pci_dev *dev)
+{
+	return __find_aer_error(dev->bus->number, dev->devfn);
+}
+
+/* inject_lock must be held before calling */
+static struct pci_ops *__find_pci_bus_ops(struct pci_bus *bus)
+{
+	struct pci_bus_ops *bus_ops;
+
+	list_for_each_entry(bus_ops, &pci_bus_ops_list, list) {
+		if (bus_ops->bus == bus)
+			return bus_ops->ops;
+	}
+	return NULL;
+}
+
+static struct pci_bus_ops *pci_bus_ops_pop(void)
+{
+	unsigned long flags;
+	struct pci_bus_ops *bus_ops = NULL;
+
+	spin_lock_irqsave(&inject_lock, flags);
+	if (list_empty(&pci_bus_ops_list))
+		bus_ops = NULL;
+	else {
+		struct list_head *lh = pci_bus_ops_list.next;
+		list_del(lh);
+		bus_ops = list_entry(lh, struct pci_bus_ops, list);
+	}
+	spin_unlock_irqrestore(&inject_lock, flags);
+	return bus_ops;
+}
+
+static u32 *find_pci_config_dword(struct aer_error *err, int where,
+				  int *prw1cs)
+{
+	int rw1cs = 0;
+	u32 *target = NULL;
+
+	if (err->pos_cap_err == -1)
+		return NULL;
+
+	switch (where - err->pos_cap_err) {
+	case PCI_ERR_UNCOR_STATUS:
+		target = &err->uncor_status;
+		rw1cs = 1;
+		break;
+	case PCI_ERR_COR_STATUS:
+		target = &err->cor_status;
+		rw1cs = 1;
+		break;
+	case PCI_ERR_HEADER_LOG:
+		target = &err->header_log0;
+		break;
+	case PCI_ERR_HEADER_LOG+4:
+		target = &err->header_log1;
+		break;
+	case PCI_ERR_HEADER_LOG+8:
+	        target = &err->header_log2;
+		break;
+	case PCI_ERR_HEADER_LOG+12:
+		target = &err->header_log3;
+		break;
+	case PCI_ERR_ROOT_STATUS:
+		target = &err->root_status;
+		rw1cs = 1;
+		break;
+	case PCI_ERR_ROOT_COR_SRC:
+		target = &err->source_id;
+		break;
+	}
+	if (prw1cs)
+		*prw1cs = rw1cs;
+	return target;
+}
+
+static int pci_read_aer(struct pci_bus *bus, unsigned int devfn, int where,
+			int size, u32 *val)
+{
+	u32 *sim;
+	struct aer_error *err;
+	unsigned long flags;
+	struct pci_ops *ops;
+
+	spin_lock_irqsave(&inject_lock, flags);
+	if (size != sizeof(u32))
+		goto out;
+	err = __find_aer_error(bus->number, devfn);
+	if (!err)
+		goto out;
+
+	sim = find_pci_config_dword(err, where, NULL);
+	if (sim) {
+		*val = *sim;
+		spin_unlock_irqrestore(&inject_lock, flags);
+		return 0;
+	}
+out:
+	ops = __find_pci_bus_ops(bus);
+	spin_unlock_irqrestore(&inject_lock, flags);
+	return ops->read(bus, devfn, where, size, val);
+}
+
+int pci_write_aer(struct pci_bus *bus, unsigned int devfn, int where, int size,
+		  u32 val)
+{
+	u32 *sim;
+	struct aer_error *err;
+	unsigned long flags;
+	int rw1cs;
+	struct pci_ops *ops;
+
+	spin_lock_irqsave(&inject_lock, flags);
+	if (size != sizeof(u32))
+		goto out;
+	err = __find_aer_error(bus->number, devfn);
+	if (!err)
+		goto out;
+
+	sim = find_pci_config_dword(err, where, &rw1cs);
+	if (sim) {
+		if (rw1cs)
+			*sim ^= val;
+		else
+			*sim = val;
+		spin_unlock_irqrestore(&inject_lock, flags);
+		return 0;
+	}
+out:
+	ops = __find_pci_bus_ops(bus);
+	spin_unlock_irqrestore(&inject_lock, flags);
+	return ops->write(bus, devfn, where, size, val);
+}
+
+static struct pci_ops pci_ops_aer = {
+	.read = pci_read_aer,
+	.write = pci_write_aer,
+};
+
+static void pci_bus_ops_init(struct pci_bus_ops *bus_ops,
+			     struct pci_bus *bus,
+			     struct pci_ops *ops)
+{
+	INIT_LIST_HEAD(&bus_ops->list);
+	bus_ops->bus = bus;
+	bus_ops->ops = ops;
+}
+
+static int pci_bus_set_aer_ops(struct pci_bus *bus)
+{
+	struct pci_ops *ops;
+	struct pci_bus_ops *bus_ops;
+	unsigned long flags;
+
+	bus_ops = kmalloc(sizeof(*bus_ops), GFP_KERNEL);
+	if (!bus_ops)
+		return -ENOMEM;
+	ops = pci_bus_set_ops(bus, &pci_ops_aer);
+	spin_lock_irqsave(&inject_lock, flags);
+	if (ops == &pci_ops_aer)
+		goto out;
+	pci_bus_ops_init(bus_ops, bus, ops);
+	list_add(&bus_ops->list, &pci_bus_ops_list);
+	bus_ops = NULL;
+out:
+	spin_unlock_irqrestore(&inject_lock, flags);
+	if (bus_ops)
+		kfree(bus_ops);
+	return 0;
+}
+
+static struct pci_dev *pcie_find_root_port(struct pci_dev *dev)
+{
+	while (1) {
+		if (!dev->is_pcie)
+			break;
+		if (dev->pcie_type == PCI_EXP_TYPE_ROOT_PORT)
+			return dev;
+		if (!dev->bus->self)
+			break;
+		dev = dev->bus->self;
+	}
+	return NULL;
+}
+
+static int find_aer_device_iter(struct device *device, void *data)
+{
+	struct pcie_device **result = data;
+	struct pcie_device *pcie_dev;
+
+	if (device->bus == &pcie_port_bus_type) {
+		pcie_dev = to_pcie_device(device);
+		if (pcie_dev->service & PCIE_PORT_SERVICE_AER) {
+			*result = pcie_dev;
+			return 1;
+		}
+	}
+	return 0;
+}
+
+static int find_aer_device(struct pci_dev *dev, struct pcie_device **result)
+{
+	return device_for_each_child(&dev->dev, result, find_aer_device_iter);
+}
+
+static int aer_inject(struct aer_error_inj *einj)
+{
+	struct aer_error *err, *rperr;
+	struct aer_error *err_alloc = NULL, *rperr_alloc = NULL;
+	struct pci_dev *dev, *rpdev;
+	struct pcie_device *edev;
+	unsigned long flags;
+	unsigned int devfn = PCI_DEVFN(einj->dev, einj->fn);
+	int pos_cap_err, rp_pos_cap_err;
+	u32 sever;
+	int ret = 0;
+
+	dev = pci_get_bus_and_slot(einj->bus, devfn);
+	if (!dev)
+		return -EINVAL;
+	rpdev = pcie_find_root_port(dev);
+	if (!rpdev) {
+		ret = -EINVAL;
+		goto out_put;
+	}
+
+	pos_cap_err = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
+	if (!pos_cap_err) {
+		ret = -EIO;
+		goto out_put;
+	}
+	pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_SEVER, &sever);
+
+	rp_pos_cap_err = pci_find_ext_capability(rpdev, PCI_EXT_CAP_ID_ERR);
+	if (!rp_pos_cap_err) {
+		ret = -EIO;
+		goto out_put;
+	}
+
+	err_alloc =  kzalloc(sizeof(struct aer_error), GFP_KERNEL);
+	if (!err_alloc) {
+		ret = -ENOMEM;
+		goto out_put;
+	}
+	rperr_alloc =  kzalloc(sizeof(struct aer_error), GFP_KERNEL);
+	if (!rperr_alloc) {
+		ret = -ENOMEM;
+		goto out_put;
+	}
+
+	spin_lock_irqsave(&inject_lock, flags);
+
+	err = __find_aer_error_by_dev(dev);
+	if (!err) {
+		err = err_alloc;
+		err_alloc = NULL;
+		aer_error_init(err, einj->bus, devfn, pos_cap_err);
+		list_add(&err->list, &einjected);
+	}
+	err->uncor_status |= einj->uncor_status;
+	err->cor_status |= einj->cor_status;
+	err->header_log0 = einj->header_log0;
+	err->header_log1 = einj->header_log1;
+	err->header_log2 = einj->header_log2;
+	err->header_log3 = einj->header_log3;
+
+	rperr = __find_aer_error_by_dev(rpdev);
+	if (!rperr) {
+		rperr = rperr_alloc;
+		rperr_alloc = NULL;
+		aer_error_init(rperr, rpdev->bus->number, rpdev->devfn,
+			       rp_pos_cap_err);
+		list_add(&rperr->list, &einjected);
+	}
+	if (einj->cor_status) {
+		if (rperr->root_status & PCI_ERR_ROOT_COR_RCV)
+			rperr->root_status |= PCI_ERR_ROOT_MULTI_COR_RCV;
+		else
+			rperr->root_status |= PCI_ERR_ROOT_COR_RCV;
+		rperr->source_id &= 0xffff0000;
+		rperr->source_id |= (einj->bus << 8) | devfn;
+	}
+	if (einj->uncor_status) {
+		if (rperr->root_status & PCI_ERR_ROOT_UNCOR_RCV)
+			rperr->root_status |= PCI_ERR_ROOT_MULTI_UNCOR_RCV;
+		if (sever & einj->uncor_status) {
+			rperr->root_status |= PCI_ERR_ROOT_FATAL_RCV;
+			if (!(rperr->root_status & PCI_ERR_ROOT_UNCOR_RCV))
+				rperr->root_status |= PCI_ERR_ROOT_FIRST_FATAL;
+		} else
+			rperr->root_status |= PCI_ERR_ROOT_NONFATAL_RCV;
+		rperr->root_status |= PCI_ERR_ROOT_UNCOR_RCV;
+		rperr->source_id &= 0x0000ffff;
+		rperr->source_id |= ((einj->bus << 8) | devfn) << 16;
+	}
+	spin_unlock_irqrestore(&inject_lock, flags);
+
+	ret = pci_bus_set_aer_ops(dev->bus);
+	if (ret)
+		goto out_put;
+	ret = pci_bus_set_aer_ops(rpdev->bus);
+	if (ret)
+		goto out_put;
+
+	if (find_aer_device(rpdev, &edev))
+		aer_irq(-1, edev);
+	else
+		ret = -EINVAL;
+out_put:
+	if (err_alloc)
+		kfree(err_alloc);
+	if (rperr_alloc)
+		kfree(rperr_alloc);
+	pci_dev_put(dev);
+	return ret;
+}
+
+static ssize_t aer_inject_write(struct file *filp, const char __user *ubuf,
+				size_t usize, loff_t *off)
+{
+	struct aer_error_inj einj;
+	int ret;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	if (usize != sizeof(struct aer_error_inj))
+		return -EINVAL;
+
+	if (copy_from_user(&einj, ubuf, usize))
+		return -EFAULT;
+
+	ret = aer_inject(&einj);
+	return ret ? ret : usize;
+}
+
+static const struct file_operations aer_inject_fops = {
+	.write = aer_inject_write,
+	.owner = THIS_MODULE,
+};
+
+static struct miscdevice aer_inject_device = {
+	.minor = MISC_DYNAMIC_MINOR,
+	.name = "aer_inject",
+	.fops = &aer_inject_fops,
+};
+
+static int __init aer_inject_init(void)
+{
+	return misc_register(&aer_inject_device);
+}
+
+static void __exit aer_inject_exit(void)
+{
+	struct aer_error *err, *err_next;
+	unsigned long flags;
+	struct pci_bus_ops *bus_ops;
+
+	misc_deregister(&aer_inject_device);
+
+	while ((bus_ops = pci_bus_ops_pop())) {
+		pci_bus_set_ops(bus_ops->bus, bus_ops->ops);
+		kfree(bus_ops);
+	}
+
+	spin_lock_irqsave(&inject_lock, flags);
+	list_for_each_entry_safe(err, err_next,
+				 &pci_bus_ops_list, list) {
+		list_del(&err->list);
+		kfree(err);
+	}
+	spin_unlock_irqrestore(&inject_lock, flags);
+}
+
+module_init(aer_inject_init);
+module_exit(aer_inject_exit);
+
+MODULE_DESCRIPTION("PCIE AER software error injector");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c
index 32ade5af927..4770f13b3ca 100644
--- a/drivers/pci/pcie/aer/aerdrv.c
+++ b/drivers/pci/pcie/aer/aerdrv.c
@@ -77,7 +77,7 @@ void pci_no_aer(void)
  *
  * Invoked when Root Port detects AER messages.
  **/
-static irqreturn_t aer_irq(int irq, void *context)
+irqreturn_t aer_irq(int irq, void *context)
 {
 	unsigned int status, id;
 	struct pcie_device *pdev = (struct pcie_device *)context;
@@ -126,6 +126,7 @@ static irqreturn_t aer_irq(int irq, void *context)
 
 	return IRQ_HANDLED;
 }
+EXPORT_SYMBOL_GPL(aer_irq);
 
 /**
  * aer_alloc_rpc - allocate Root Port data structure
diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h
index aa14482a477..bbd7428ca2d 100644
--- a/drivers/pci/pcie/aer/aerdrv.h
+++ b/drivers/pci/pcie/aer/aerdrv.h
@@ -11,6 +11,7 @@
 #include <linux/workqueue.h>
 #include <linux/pcieport_if.h>
 #include <linux/aer.h>
+#include <linux/interrupt.h>
 
 #define AER_NONFATAL			0
 #define AER_FATAL			1
@@ -56,7 +57,11 @@ struct header_log_regs {
 	unsigned int dw3;
 };
 
+#define AER_MAX_MULTI_ERR_DEVICES	5	/* Not likely to have more */
 struct aer_err_info {
+	struct pci_dev *dev[AER_MAX_MULTI_ERR_DEVICES];
+	int error_dev_num;
+	u16 id;
 	int severity;			/* 0:NONFATAL | 1:FATAL | 2:COR */
 	int flags;
 	unsigned int status;		/* COR/UNCOR Error Status */
@@ -120,6 +125,7 @@ extern void aer_delete_rootport(struct aer_rpc *rpc);
 extern int aer_init(struct pcie_device *dev);
 extern void aer_isr(struct work_struct *work);
 extern void aer_print_error(struct pci_dev *dev, struct aer_err_info *info);
+extern irqreturn_t aer_irq(int irq, void *context);
 
 #ifdef CONFIG_ACPI
 extern int aer_osc_setup(struct pcie_device *pciedev);
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
index 307452f3003..3d8872704a5 100644
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -26,7 +26,9 @@
 #include "aerdrv.h"
 
 static int forceload;
+static int nosourceid;
 module_param(forceload, bool, 0);
+module_param(nosourceid, bool, 0);
 
 int pci_enable_pcie_error_reporting(struct pci_dev *dev)
 {
@@ -109,19 +111,23 @@ int pci_cleanup_aer_correct_error_status(struct pci_dev *dev)
 #endif  /*  0  */
 
 
-static void set_device_error_reporting(struct pci_dev *dev, void *data)
+static int set_device_error_reporting(struct pci_dev *dev, void *data)
 {
 	bool enable = *((bool *)data);
 
-	if (dev->pcie_type != PCIE_RC_PORT &&
-	    dev->pcie_type != PCIE_SW_UPSTREAM_PORT &&
-	    dev->pcie_type != PCIE_SW_DOWNSTREAM_PORT)
-		return;
+	if (dev->pcie_type == PCIE_RC_PORT ||
+	    dev->pcie_type == PCIE_SW_UPSTREAM_PORT ||
+	    dev->pcie_type == PCIE_SW_DOWNSTREAM_PORT) {
+		if (enable)
+			pci_enable_pcie_error_reporting(dev);
+		else
+			pci_disable_pcie_error_reporting(dev);
+	}
 
 	if (enable)
-		pci_enable_pcie_error_reporting(dev);
-	else
-		pci_disable_pcie_error_reporting(dev);
+		pcie_set_ecrc_checking(dev);
+
+	return 0;
 }
 
 /**
@@ -139,73 +145,148 @@ static void set_downstream_devices_error_reporting(struct pci_dev *dev,
 	pci_walk_bus(dev->subordinate, set_device_error_reporting, &enable);
 }
 
-static int find_device_iter(struct device *device, void *data)
+static inline int compare_device_id(struct pci_dev *dev,
+			struct aer_err_info *e_info)
 {
-	struct pci_dev *dev;
-	u16 id = *(unsigned long *)data;
-	u8 secondary, subordinate, d_bus = id >> 8;
+	if (e_info->id == ((dev->bus->number << 8) | dev->devfn)) {
+		/*
+		 * Device ID match
+		 */
+		return 1;
+	}
 
-	if (device->bus == &pci_bus_type) {
-		dev = to_pci_dev(device);
-		if (id == ((dev->bus->number << 8) | dev->devfn)) {
-			/*
-			 * Device ID match
-			 */
-			*(unsigned long*)data = (unsigned long)device;
-			return 1;
-		}
+	return 0;
+}
+
+static int add_error_device(struct aer_err_info *e_info, struct pci_dev *dev)
+{
+	if (e_info->error_dev_num < AER_MAX_MULTI_ERR_DEVICES) {
+		e_info->dev[e_info->error_dev_num] = dev;
+		e_info->error_dev_num++;
+		return 1;
+	} else
+		return 0;
+}
+
+
+#define	PCI_BUS(x)	(((x) >> 8) & 0xff)
+
+static int find_device_iter(struct pci_dev *dev, void *data)
+{
+	int pos;
+	u32 status;
+	u32 mask;
+	u16 reg16;
+	int result;
+	struct aer_err_info *e_info = (struct aer_err_info *)data;
+
+	/*
+	 * When bus id is equal to 0, it might be a bad id
+	 * reported by root port.
+	 */
+	if (!nosourceid && (PCI_BUS(e_info->id) != 0)) {
+		result = compare_device_id(dev, e_info);
+		if (result)
+			add_error_device(e_info, dev);
 
 		/*
-		 * If device is P2P, check if it is an upstream?
+		 * If there is no multiple error, we stop
+		 * or continue based on the id comparing.
 		 */
-		if (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE) {
-			pci_read_config_byte(dev, PCI_SECONDARY_BUS,
-				&secondary);
-			pci_read_config_byte(dev, PCI_SUBORDINATE_BUS,
-				&subordinate);
-			if (d_bus >= secondary && d_bus <= subordinate) {
-				*(unsigned long*)data = (unsigned long)device;
-				return 1;
-			}
+		if (!(e_info->flags & AER_MULTI_ERROR_VALID_FLAG))
+			return result;
+
+		/*
+		 * If there are multiple errors and id does match,
+		 * We need continue to search other devices under
+		 * the root port. Return 0 means that.
+		 */
+		if (result)
+			return 0;
+	}
+
+	/*
+	 * When either
+	 *      1) nosourceid==y;
+	 *      2) bus id is equal to 0. Some ports might lose the bus
+	 *              id of error source id;
+	 *      3) There are multiple errors and prior id comparing fails;
+	 * We check AER status registers to find the initial reporter.
+	 */
+	if (atomic_read(&dev->enable_cnt) == 0)
+		return 0;
+	pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+	if (!pos)
+		return 0;
+	/* Check if AER is enabled */
+	pci_read_config_word(dev, pos+PCI_EXP_DEVCTL, &reg16);
+	if (!(reg16 & (
+		PCI_EXP_DEVCTL_CERE |
+		PCI_EXP_DEVCTL_NFERE |
+		PCI_EXP_DEVCTL_FERE |
+		PCI_EXP_DEVCTL_URRE)))
+		return 0;
+	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
+	if (!pos)
+		return 0;
+
+	status = 0;
+	mask = 0;
+	if (e_info->severity == AER_CORRECTABLE) {
+		pci_read_config_dword(dev,
+				pos + PCI_ERR_COR_STATUS,
+				&status);
+		pci_read_config_dword(dev,
+				pos + PCI_ERR_COR_MASK,
+				&mask);
+		if (status & ERR_CORRECTABLE_ERROR_MASK & ~mask) {
+			add_error_device(e_info, dev);
+			goto added;
+		}
+	} else {
+		pci_read_config_dword(dev,
+				pos + PCI_ERR_UNCOR_STATUS,
+				&status);
+		pci_read_config_dword(dev,
+				pos + PCI_ERR_UNCOR_MASK,
+				&mask);
+		if (status & ERR_UNCORRECTABLE_ERROR_MASK & ~mask) {
+			add_error_device(e_info, dev);
+			goto added;
 		}
 	}
 
 	return 0;
+
+added:
+	if (e_info->flags & AER_MULTI_ERROR_VALID_FLAG)
+		return 0;
+	else
+		return 1;
 }
 
 /**
  * find_source_device - search through device hierarchy for source device
  * @parent: pointer to Root Port pci_dev data structure
- * @id: device ID of agent who sends an error message to this Root Port
+ * @err_info: including detailed error information such like id
  *
  * Invoked when error is detected at the Root Port.
  */
-static struct device* find_source_device(struct pci_dev *parent, u16 id)
+static void find_source_device(struct pci_dev *parent,
+		struct aer_err_info *e_info)
 {
 	struct pci_dev *dev = parent;
-	struct device *device;
-	unsigned long device_addr;
-	int status;
+	int result;
 
 	/* Is Root Port an agent that sends error message? */
-	if (id == ((dev->bus->number << 8) | dev->devfn))
-		return &dev->dev;
-
-	do {
-		device_addr = id;
- 		if ((status = device_for_each_child(&dev->dev,
-			&device_addr, find_device_iter))) {
-			device = (struct device*)device_addr;
-			dev = to_pci_dev(device);
-			if (id == ((dev->bus->number << 8) | dev->devfn))
-				return device;
-		}
- 	}while (status);
+	result = find_device_iter(dev, e_info);
+	if (result)
+		return;
 
-	return NULL;
+	pci_walk_bus(parent->subordinate, find_device_iter, e_info);
 }
 
-static void report_error_detected(struct pci_dev *dev, void *data)
+static int report_error_detected(struct pci_dev *dev, void *data)
 {
 	pci_ers_result_t vote;
 	struct pci_error_handlers *err_handler;
@@ -230,16 +311,16 @@ static void report_error_detected(struct pci_dev *dev, void *data)
 				   dev->driver ?
 				   "no AER-aware driver" : "no driver");
 		}
-		return;
+		return 0;
 	}
 
 	err_handler = dev->driver->err_handler;
 	vote = err_handler->error_detected(dev, result_data->state);
 	result_data->result = merge_result(result_data->result, vote);
-	return;
+	return 0;
 }
 
-static void report_mmio_enabled(struct pci_dev *dev, void *data)
+static int report_mmio_enabled(struct pci_dev *dev, void *data)
 {
 	pci_ers_result_t vote;
 	struct pci_error_handlers *err_handler;
@@ -249,15 +330,15 @@ static void report_mmio_enabled(struct pci_dev *dev, void *data)
 	if (!dev->driver ||
 		!dev->driver->err_handler ||
 		!dev->driver->err_handler->mmio_enabled)
-		return;
+		return 0;
 
 	err_handler = dev->driver->err_handler;
 	vote = err_handler->mmio_enabled(dev);
 	result_data->result = merge_result(result_data->result, vote);
-	return;
+	return 0;
 }
 
-static void report_slot_reset(struct pci_dev *dev, void *data)
+static int report_slot_reset(struct pci_dev *dev, void *data)
 {
 	pci_ers_result_t vote;
 	struct pci_error_handlers *err_handler;
@@ -267,15 +348,15 @@ static void report_slot_reset(struct pci_dev *dev, void *data)
 	if (!dev->driver ||
 		!dev->driver->err_handler ||
 		!dev->driver->err_handler->slot_reset)
-		return;
+		return 0;
 
 	err_handler = dev->driver->err_handler;
 	vote = err_handler->slot_reset(dev);
 	result_data->result = merge_result(result_data->result, vote);
-	return;
+	return 0;
 }
 
-static void report_resume(struct pci_dev *dev, void *data)
+static int report_resume(struct pci_dev *dev, void *data)
 {
 	struct pci_error_handlers *err_handler;
 
@@ -284,11 +365,11 @@ static void report_resume(struct pci_dev *dev, void *data)
 	if (!dev->driver ||
 		!dev->driver->err_handler ||
 		!dev->driver->err_handler->resume)
-		return;
+		return 0;
 
 	err_handler = dev->driver->err_handler;
 	err_handler->resume(dev);
-	return;
+	return 0;
 }
 
 /**
@@ -305,7 +386,7 @@ static void report_resume(struct pci_dev *dev, void *data)
 static pci_ers_result_t broadcast_error_message(struct pci_dev *dev,
 	enum pci_channel_state state,
 	char *error_mesg,
-	void (*cb)(struct pci_dev *, void *))
+	int (*cb)(struct pci_dev *, void *))
 {
 	struct aer_broadcast_data result_data;
 
@@ -497,12 +578,12 @@ static pci_ers_result_t do_recovery(struct pcie_device *aerdev,
  */
 static void handle_error_source(struct pcie_device * aerdev,
 	struct pci_dev *dev,
-	struct aer_err_info info)
+	struct aer_err_info *info)
 {
 	pci_ers_result_t status = 0;
 	int pos;
 
-	if (info.severity == AER_CORRECTABLE) {
+	if (info->severity == AER_CORRECTABLE) {
 		/*
 		 * Correctable error does not need software intevention.
 		 * No need to go through error recovery process.
@@ -510,9 +591,9 @@ static void handle_error_source(struct pcie_device * aerdev,
 		pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
 		if (pos)
 			pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS,
-					info.status);
+					info->status);
 	} else {
-		status = do_recovery(aerdev, dev, info.severity);
+		status = do_recovery(aerdev, dev, info->severity);
 		if (status == PCI_ERS_RESULT_RECOVERED) {
 			dev_printk(KERN_DEBUG, &dev->dev, "AER driver "
 				   "successfully recovered\n");
@@ -661,6 +742,28 @@ static int get_device_error_info(struct pci_dev *dev, struct aer_err_info *info)
 	return AER_SUCCESS;
 }
 
+static inline void aer_process_err_devices(struct pcie_device *p_device,
+			struct aer_err_info *e_info)
+{
+	int i;
+
+	if (!e_info->dev[0]) {
+		dev_printk(KERN_DEBUG, &p_device->port->dev,
+				"can't find device of ID%04x\n",
+				e_info->id);
+	}
+
+	for (i = 0; i < e_info->error_dev_num && e_info->dev[i]; i++) {
+		if (get_device_error_info(e_info->dev[i], e_info) ==
+				AER_SUCCESS) {
+			aer_print_error(e_info->dev[i], e_info);
+			handle_error_source(p_device,
+					e_info->dev[i],
+					e_info);
+		}
+	}
+}
+
 /**
  * aer_isr_one_error - consume an error detected by root port
  * @p_device: pointer to error root port service device
@@ -669,10 +772,16 @@ static int get_device_error_info(struct pci_dev *dev, struct aer_err_info *info)
 static void aer_isr_one_error(struct pcie_device *p_device,
 		struct aer_err_source *e_src)
 {
-	struct device *s_device;
-	struct aer_err_info e_info = {0, 0, 0,};
+	struct aer_err_info *e_info;
 	int i;
-	u16 id;
+
+	/* struct aer_err_info might be big, so we allocate it with slab */
+	e_info = kmalloc(sizeof(struct aer_err_info), GFP_KERNEL);
+	if (e_info == NULL) {
+		dev_printk(KERN_DEBUG, &p_device->port->dev,
+			"Can't allocate mem when processing AER errors\n");
+		return;
+	}
 
 	/*
 	 * There is a possibility that both correctable error and
@@ -684,31 +793,26 @@ static void aer_isr_one_error(struct pcie_device *p_device,
 		if (!(e_src->status & i))
 			continue;
 
+		memset(e_info, 0, sizeof(struct aer_err_info));
+
 		/* Init comprehensive error information */
 		if (i & PCI_ERR_ROOT_COR_RCV) {
-			id = ERR_COR_ID(e_src->id);
-			e_info.severity = AER_CORRECTABLE;
+			e_info->id = ERR_COR_ID(e_src->id);
+			e_info->severity = AER_CORRECTABLE;
 		} else {
-			id = ERR_UNCOR_ID(e_src->id);
-			e_info.severity = ((e_src->status >> 6) & 1);
+			e_info->id = ERR_UNCOR_ID(e_src->id);
+			e_info->severity = ((e_src->status >> 6) & 1);
 		}
 		if (e_src->status &
 			(PCI_ERR_ROOT_MULTI_COR_RCV |
 			 PCI_ERR_ROOT_MULTI_UNCOR_RCV))
-			e_info.flags |= AER_MULTI_ERROR_VALID_FLAG;
-		if (!(s_device = find_source_device(p_device->port, id))) {
-			printk(KERN_DEBUG "%s->can't find device of ID%04x\n",
-				__func__, id);
-			continue;
-		}
-		if (get_device_error_info(to_pci_dev(s_device), &e_info) ==
-				AER_SUCCESS) {
-			aer_print_error(to_pci_dev(s_device), &e_info);
-			handle_error_source(p_device,
-				to_pci_dev(s_device),
-				e_info);
-		}
+			e_info->flags |= AER_MULTI_ERROR_VALID_FLAG;
+
+		find_source_device(p_device->port, e_info);
+		aer_process_err_devices(p_device, e_info);
 	}
+
+	kfree(e_info);
 }
 
 /**
diff --git a/drivers/pci/pcie/aer/ecrc.c b/drivers/pci/pcie/aer/ecrc.c
new file mode 100644
index 00000000000..ece97df4df6
--- /dev/null
+++ b/drivers/pci/pcie/aer/ecrc.c
@@ -0,0 +1,131 @@
+/*
+ *    Enables/disables PCIe ECRC checking.
+ *
+ *    (C) Copyright 2009 Hewlett-Packard Development Company, L.P.
+ *    Andrew Patterson <andrew.patterson@hp.com>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; version 2 of the License.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ *    General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ *    02111-1307, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include <linux/pci_regs.h>
+#include <linux/errno.h>
+#include "../../pci.h"
+
+#define ECRC_POLICY_DEFAULT 0		/* ECRC set by BIOS */
+#define ECRC_POLICY_OFF     1		/* ECRC off for performance */
+#define ECRC_POLICY_ON      2		/* ECRC on for data integrity */
+
+static int ecrc_policy = ECRC_POLICY_DEFAULT;
+
+static const char *ecrc_policy_str[] = {
+	[ECRC_POLICY_DEFAULT] = "bios",
+	[ECRC_POLICY_OFF] = "off",
+	[ECRC_POLICY_ON] = "on"
+};
+
+/**
+ * enable_ercr_checking - enable PCIe ECRC checking for a device
+ * @dev: the PCI device
+ *
+ * Returns 0 on success, or negative on failure.
+ */
+static int enable_ecrc_checking(struct pci_dev *dev)
+{
+	int pos;
+	u32 reg32;
+
+	if (!dev->is_pcie)
+		return -ENODEV;
+
+	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
+	if (!pos)
+		return -ENODEV;
+
+	pci_read_config_dword(dev, pos + PCI_ERR_CAP, &reg32);
+	if (reg32 & PCI_ERR_CAP_ECRC_GENC)
+		reg32 |= PCI_ERR_CAP_ECRC_GENE;
+	if (reg32 & PCI_ERR_CAP_ECRC_CHKC)
+		reg32 |= PCI_ERR_CAP_ECRC_CHKE;
+	pci_write_config_dword(dev, pos + PCI_ERR_CAP, reg32);
+
+	return 0;
+}
+
+/**
+ * disable_ercr_checking - disables PCIe ECRC checking for a device
+ * @dev: the PCI device
+ *
+ * Returns 0 on success, or negative on failure.
+ */
+static int disable_ecrc_checking(struct pci_dev *dev)
+{
+	int pos;
+	u32 reg32;
+
+	if (!dev->is_pcie)
+		return -ENODEV;
+
+	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
+	if (!pos)
+		return -ENODEV;
+
+	pci_read_config_dword(dev, pos + PCI_ERR_CAP, &reg32);
+	reg32 &= ~(PCI_ERR_CAP_ECRC_GENE | PCI_ERR_CAP_ECRC_CHKE);
+	pci_write_config_dword(dev, pos + PCI_ERR_CAP, reg32);
+
+	return 0;
+}
+
+/**
+ * pcie_set_ecrc_checking - set/unset PCIe ECRC checking for a device based on global policy
+ * @dev: the PCI device
+ */
+void pcie_set_ecrc_checking(struct pci_dev *dev)
+{
+	switch (ecrc_policy) {
+	case ECRC_POLICY_DEFAULT:
+		return;
+	case ECRC_POLICY_OFF:
+		disable_ecrc_checking(dev);
+		break;
+	case ECRC_POLICY_ON:
+		enable_ecrc_checking(dev);;
+		break;
+	default:
+		return;
+	}
+}
+
+/**
+ * pcie_ecrc_get_policy - parse kernel command-line ecrc option
+ */
+void pcie_ecrc_get_policy(char *str)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ecrc_policy_str); i++)
+		if (!strncmp(str, ecrc_policy_str[i],
+			     strlen(ecrc_policy_str[i])))
+			break;
+	if (i >= ARRAY_SIZE(ecrc_policy_str))
+		return;
+
+	ecrc_policy = i;
+}
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index b0367f168af..3d27c97e048 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -26,40 +26,36 @@
 #endif
 #define MODULE_PARAM_PREFIX "pcie_aspm."
 
-struct endpoint_state {
-	unsigned int l0s_acceptable_latency;
-	unsigned int l1_acceptable_latency;
+struct aspm_latency {
+	u32 l0s;			/* L0s latency (nsec) */
+	u32 l1;				/* L1 latency (nsec) */
 };
 
 struct pcie_link_state {
-	struct list_head sibiling;
-	struct pci_dev *pdev;
-	bool downstream_has_switch;
-
-	struct pcie_link_state *parent;
-	struct list_head children;
-	struct list_head link;
+	struct pci_dev *pdev;		/* Upstream component of the Link */
+	struct pcie_link_state *root;	/* pointer to the root port link */
+	struct pcie_link_state *parent;	/* pointer to the parent Link state */
+	struct list_head sibling;	/* node in link_list */
+	struct list_head children;	/* list of child link states */
+	struct list_head link;		/* node in parent's children list */
 
 	/* ASPM state */
-	unsigned int support_state;
-	unsigned int enabled_state;
-	unsigned int bios_aspm_state;
-	/* upstream component */
-	unsigned int l0s_upper_latency;
-	unsigned int l1_upper_latency;
-	/* downstream component */
-	unsigned int l0s_down_latency;
-	unsigned int l1_down_latency;
-	/* Clock PM state*/
-	unsigned int clk_pm_capable;
-	unsigned int clk_pm_enabled;
-	unsigned int bios_clk_state;
+	u32 aspm_support:2;		/* Supported ASPM state */
+	u32 aspm_enabled:2;		/* Enabled ASPM state */
+	u32 aspm_default:2;		/* Default ASPM state by BIOS */
+
+	/* Clock PM state */
+	u32 clkpm_capable:1;		/* Clock PM capable? */
+	u32 clkpm_enabled:1;		/* Current Clock PM state */
+	u32 clkpm_default:1;		/* Default Clock PM state by BIOS */
 
+	/* Latencies */
+	struct aspm_latency latency;	/* Exit latency */
 	/*
-	 * A pcie downstream port only has one slot under it, so at most there
-	 * are 8 functions
+	 * Endpoint acceptable latencies. A pcie downstream port only
+	 * has one slot under it, so at most there are 8 functions.
 	 */
-	struct endpoint_state endpoints[8];
+	struct aspm_latency acceptable[8];
 };
 
 static int aspm_disabled, aspm_force;
@@ -78,27 +74,23 @@ static const char *policy_str[] = {
 
 #define LINK_RETRAIN_TIMEOUT HZ
 
-static int policy_to_aspm_state(struct pci_dev *pdev)
+static int policy_to_aspm_state(struct pcie_link_state *link)
 {
-	struct pcie_link_state *link_state = pdev->link_state;
-
 	switch (aspm_policy) {
 	case POLICY_PERFORMANCE:
 		/* Disable ASPM and Clock PM */
 		return 0;
 	case POLICY_POWERSAVE:
 		/* Enable ASPM L0s/L1 */
-		return PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1;
+		return PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1;
 	case POLICY_DEFAULT:
-		return link_state->bios_aspm_state;
+		return link->aspm_default;
 	}
 	return 0;
 }
 
-static int policy_to_clkpm_state(struct pci_dev *pdev)
+static int policy_to_clkpm_state(struct pcie_link_state *link)
 {
-	struct pcie_link_state *link_state = pdev->link_state;
-
 	switch (aspm_policy) {
 	case POLICY_PERFORMANCE:
 		/* Disable ASPM and Clock PM */
@@ -107,73 +99,78 @@ static int policy_to_clkpm_state(struct pci_dev *pdev)
 		/* Disable Clock PM */
 		return 1;
 	case POLICY_DEFAULT:
-		return link_state->bios_clk_state;
+		return link->clkpm_default;
 	}
 	return 0;
 }
 
-static void pcie_set_clock_pm(struct pci_dev *pdev, int enable)
+static void pcie_set_clkpm_nocheck(struct pcie_link_state *link, int enable)
 {
-	struct pci_dev *child_dev;
 	int pos;
 	u16 reg16;
-	struct pcie_link_state *link_state = pdev->link_state;
+	struct pci_dev *child;
+	struct pci_bus *linkbus = link->pdev->subordinate;
 
-	list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
-		pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
+	list_for_each_entry(child, &linkbus->devices, bus_list) {
+		pos = pci_find_capability(child, PCI_CAP_ID_EXP);
 		if (!pos)
 			return;
-		pci_read_config_word(child_dev, pos + PCI_EXP_LNKCTL, &reg16);
+		pci_read_config_word(child, pos + PCI_EXP_LNKCTL, &reg16);
 		if (enable)
 			reg16 |= PCI_EXP_LNKCTL_CLKREQ_EN;
 		else
 			reg16 &= ~PCI_EXP_LNKCTL_CLKREQ_EN;
-		pci_write_config_word(child_dev, pos + PCI_EXP_LNKCTL, reg16);
+		pci_write_config_word(child, pos + PCI_EXP_LNKCTL, reg16);
 	}
-	link_state->clk_pm_enabled = !!enable;
+	link->clkpm_enabled = !!enable;
 }
 
-static void pcie_check_clock_pm(struct pci_dev *pdev, int blacklist)
+static void pcie_set_clkpm(struct pcie_link_state *link, int enable)
 {
-	int pos;
+	/* Don't enable Clock PM if the link is not Clock PM capable */
+	if (!link->clkpm_capable && enable)
+		return;
+	/* Need nothing if the specified equals to current state */
+	if (link->clkpm_enabled == enable)
+		return;
+	pcie_set_clkpm_nocheck(link, enable);
+}
+
+static void pcie_clkpm_cap_init(struct pcie_link_state *link, int blacklist)
+{
+	int pos, capable = 1, enabled = 1;
 	u32 reg32;
 	u16 reg16;
-	int capable = 1, enabled = 1;
-	struct pci_dev *child_dev;
-	struct pcie_link_state *link_state = pdev->link_state;
+	struct pci_dev *child;
+	struct pci_bus *linkbus = link->pdev->subordinate;
 
 	/* All functions should have the same cap and state, take the worst */
-	list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
-		pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
+	list_for_each_entry(child, &linkbus->devices, bus_list) {
+		pos = pci_find_capability(child, PCI_CAP_ID_EXP);
 		if (!pos)
 			return;
-		pci_read_config_dword(child_dev, pos + PCI_EXP_LNKCAP, &reg32);
+		pci_read_config_dword(child, pos + PCI_EXP_LNKCAP, &reg32);
 		if (!(reg32 & PCI_EXP_LNKCAP_CLKPM)) {
 			capable = 0;
 			enabled = 0;
 			break;
 		}
-		pci_read_config_word(child_dev, pos + PCI_EXP_LNKCTL, &reg16);
+		pci_read_config_word(child, pos + PCI_EXP_LNKCTL, &reg16);
 		if (!(reg16 & PCI_EXP_LNKCTL_CLKREQ_EN))
 			enabled = 0;
 	}
-	link_state->clk_pm_enabled = enabled;
-	link_state->bios_clk_state = enabled;
-	if (!blacklist) {
-		link_state->clk_pm_capable = capable;
-		pcie_set_clock_pm(pdev, policy_to_clkpm_state(pdev));
-	} else {
-		link_state->clk_pm_capable = 0;
-		pcie_set_clock_pm(pdev, 0);
-	}
+	link->clkpm_enabled = enabled;
+	link->clkpm_default = enabled;
+	link->clkpm_capable = (blacklist) ? 0 : capable;
 }
 
-static bool pcie_aspm_downstream_has_switch(struct pci_dev *pdev)
+static bool pcie_aspm_downstream_has_switch(struct pcie_link_state *link)
 {
-	struct pci_dev *child_dev;
+	struct pci_dev *child;
+	struct pci_bus *linkbus = link->pdev->subordinate;
 
-	list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
-		if (child_dev->pcie_type == PCI_EXP_TYPE_UPSTREAM)
+	list_for_each_entry(child, &linkbus->devices, bus_list) {
+		if (child->pcie_type == PCI_EXP_TYPE_UPSTREAM)
 			return true;
 	}
 	return false;
@@ -184,289 +181,263 @@ static bool pcie_aspm_downstream_has_switch(struct pci_dev *pdev)
  *   could use common clock. If they are, configure them to use the
  *   common clock. That will reduce the ASPM state exit latency.
  */
-static void pcie_aspm_configure_common_clock(struct pci_dev *pdev)
+static void pcie_aspm_configure_common_clock(struct pcie_link_state *link)
 {
-	int pos, child_pos, i = 0;
-	u16 reg16 = 0;
-	struct pci_dev *child_dev;
-	int same_clock = 1;
+	int ppos, cpos, same_clock = 1;
+	u16 reg16, parent_reg, child_reg[8];
 	unsigned long start_jiffies;
-	u16 child_regs[8], parent_reg;
+	struct pci_dev *child, *parent = link->pdev;
+	struct pci_bus *linkbus = parent->subordinate;
 	/*
-	 * all functions of a slot should have the same Slot Clock
+	 * All functions of a slot should have the same Slot Clock
 	 * Configuration, so just check one function
-	 * */
-	child_dev = list_entry(pdev->subordinate->devices.next, struct pci_dev,
-		bus_list);
-	BUG_ON(!child_dev->is_pcie);
+	 */
+	child = list_entry(linkbus->devices.next, struct pci_dev, bus_list);
+	BUG_ON(!child->is_pcie);
 
 	/* Check downstream component if bit Slot Clock Configuration is 1 */
-	child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
-	pci_read_config_word(child_dev, child_pos + PCI_EXP_LNKSTA, &reg16);
+	cpos = pci_find_capability(child, PCI_CAP_ID_EXP);
+	pci_read_config_word(child, cpos + PCI_EXP_LNKSTA, &reg16);
 	if (!(reg16 & PCI_EXP_LNKSTA_SLC))
 		same_clock = 0;
 
 	/* Check upstream component if bit Slot Clock Configuration is 1 */
-	pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
-	pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, &reg16);
+	ppos = pci_find_capability(parent, PCI_CAP_ID_EXP);
+	pci_read_config_word(parent, ppos + PCI_EXP_LNKSTA, &reg16);
 	if (!(reg16 & PCI_EXP_LNKSTA_SLC))
 		same_clock = 0;
 
 	/* Configure downstream component, all functions */
-	list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
-		child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
-		pci_read_config_word(child_dev, child_pos + PCI_EXP_LNKCTL,
-			&reg16);
-		child_regs[i] = reg16;
+	list_for_each_entry(child, &linkbus->devices, bus_list) {
+		cpos = pci_find_capability(child, PCI_CAP_ID_EXP);
+		pci_read_config_word(child, cpos + PCI_EXP_LNKCTL, &reg16);
+		child_reg[PCI_FUNC(child->devfn)] = reg16;
 		if (same_clock)
 			reg16 |= PCI_EXP_LNKCTL_CCC;
 		else
 			reg16 &= ~PCI_EXP_LNKCTL_CCC;
-		pci_write_config_word(child_dev, child_pos + PCI_EXP_LNKCTL,
-			reg16);
-		i++;
+		pci_write_config_word(child, cpos + PCI_EXP_LNKCTL, reg16);
 	}
 
 	/* Configure upstream component */
-	pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, &reg16);
+	pci_read_config_word(parent, ppos + PCI_EXP_LNKCTL, &reg16);
 	parent_reg = reg16;
 	if (same_clock)
 		reg16 |= PCI_EXP_LNKCTL_CCC;
 	else
 		reg16 &= ~PCI_EXP_LNKCTL_CCC;
-	pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
+	pci_write_config_word(parent, ppos + PCI_EXP_LNKCTL, reg16);
 
-	/* retrain link */
+	/* Retrain link */
 	reg16 |= PCI_EXP_LNKCTL_RL;
-	pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
+	pci_write_config_word(parent, ppos + PCI_EXP_LNKCTL, reg16);
 
-	/* Wait for link training end */
-	/* break out after waiting for timeout */
+	/* Wait for link training end. Break out after waiting for timeout */
 	start_jiffies = jiffies;
 	for (;;) {
-		pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, &reg16);
+		pci_read_config_word(parent, ppos + PCI_EXP_LNKSTA, &reg16);
 		if (!(reg16 & PCI_EXP_LNKSTA_LT))
 			break;
 		if (time_after(jiffies, start_jiffies + LINK_RETRAIN_TIMEOUT))
 			break;
 		msleep(1);
 	}
-	/* training failed -> recover */
-	if (reg16 & PCI_EXP_LNKSTA_LT) {
-		dev_printk (KERN_ERR, &pdev->dev, "ASPM: Could not configure"
-			    " common clock\n");
-		i = 0;
-		list_for_each_entry(child_dev, &pdev->subordinate->devices,
-				    bus_list) {
-			child_pos = pci_find_capability(child_dev,
-							PCI_CAP_ID_EXP);
-			pci_write_config_word(child_dev,
-					      child_pos + PCI_EXP_LNKCTL,
-					      child_regs[i]);
-			i++;
-		}
-		pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, parent_reg);
+	if (!(reg16 & PCI_EXP_LNKSTA_LT))
+		return;
+
+	/* Training failed. Restore common clock configurations */
+	dev_printk(KERN_ERR, &parent->dev,
+		   "ASPM: Could not configure common clock\n");
+	list_for_each_entry(child, &linkbus->devices, bus_list) {
+		cpos = pci_find_capability(child, PCI_CAP_ID_EXP);
+		pci_write_config_word(child, cpos + PCI_EXP_LNKCTL,
+				      child_reg[PCI_FUNC(child->devfn)]);
 	}
+	pci_write_config_word(parent, ppos + PCI_EXP_LNKCTL, parent_reg);
 }
 
-/*
- * calc_L0S_latency: Convert L0s latency encoding to ns
- */
-static unsigned int calc_L0S_latency(unsigned int latency_encoding, int ac)
+/* Convert L0s latency encoding to ns */
+static u32 calc_l0s_latency(u32 encoding)
 {
-	unsigned int ns = 64;
+	if (encoding == 0x7)
+		return (5 * 1000);	/* > 4us */
+	return (64 << encoding);
+}
 
-	if (latency_encoding == 0x7) {
-		if (ac)
-			ns = -1U;
-		else
-			ns = 5*1000; /* > 4us */
-	} else
-		ns *= (1 << latency_encoding);
-	return ns;
+/* Convert L0s acceptable latency encoding to ns */
+static u32 calc_l0s_acceptable(u32 encoding)
+{
+	if (encoding == 0x7)
+		return -1U;
+	return (64 << encoding);
 }
 
-/*
- * calc_L1_latency: Convert L1 latency encoding to ns
- */
-static unsigned int calc_L1_latency(unsigned int latency_encoding, int ac)
+/* Convert L1 latency encoding to ns */
+static u32 calc_l1_latency(u32 encoding)
 {
-	unsigned int ns = 1000;
+	if (encoding == 0x7)
+		return (65 * 1000);	/* > 64us */
+	return (1000 << encoding);
+}
 
-	if (latency_encoding == 0x7) {
-		if (ac)
-			ns = -1U;
-		else
-			ns = 65*1000; /* > 64us */
-	} else
-		ns *= (1 << latency_encoding);
-	return ns;
+/* Convert L1 acceptable latency encoding to ns */
+static u32 calc_l1_acceptable(u32 encoding)
+{
+	if (encoding == 0x7)
+		return -1U;
+	return (1000 << encoding);
 }
 
 static void pcie_aspm_get_cap_device(struct pci_dev *pdev, u32 *state,
-	unsigned int *l0s, unsigned int *l1, unsigned int *enabled)
+				     u32 *l0s, u32 *l1, u32 *enabled)
 {
 	int pos;
 	u16 reg16;
-	u32 reg32;
-	unsigned int latency;
+	u32 reg32, encoding;
 
+	*l0s = *l1 = *enabled = 0;
 	pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
 	pci_read_config_dword(pdev, pos + PCI_EXP_LNKCAP, &reg32);
 	*state = (reg32 & PCI_EXP_LNKCAP_ASPMS) >> 10;
 	if (*state != PCIE_LINK_STATE_L0S &&
-		*state != (PCIE_LINK_STATE_L1|PCIE_LINK_STATE_L0S))
+	    *state != (PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_L0S))
 		*state = 0;
 	if (*state == 0)
 		return;
 
-	latency = (reg32 & PCI_EXP_LNKCAP_L0SEL) >> 12;
-	*l0s = calc_L0S_latency(latency, 0);
+	encoding = (reg32 & PCI_EXP_LNKCAP_L0SEL) >> 12;
+	*l0s = calc_l0s_latency(encoding);
 	if (*state & PCIE_LINK_STATE_L1) {
-		latency = (reg32 & PCI_EXP_LNKCAP_L1EL) >> 15;
-		*l1 = calc_L1_latency(latency, 0);
+		encoding = (reg32 & PCI_EXP_LNKCAP_L1EL) >> 15;
+		*l1 = calc_l1_latency(encoding);
 	}
 	pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, &reg16);
-	*enabled = reg16 & (PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1);
+	*enabled = reg16 & (PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1);
 }
 
-static void pcie_aspm_cap_init(struct pci_dev *pdev)
+static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
 {
-	struct pci_dev *child_dev;
-	u32 state, tmp;
-	struct pcie_link_state *link_state = pdev->link_state;
+	u32 support, l0s, l1, enabled;
+	struct pci_dev *child, *parent = link->pdev;
+	struct pci_bus *linkbus = parent->subordinate;
+
+	if (blacklist) {
+		/* Set support state to 0, so we will disable ASPM later */
+		link->aspm_support = 0;
+		link->aspm_default = 0;
+		link->aspm_enabled = PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1;
+		return;
+	}
+
+	/* Configure common clock before checking latencies */
+	pcie_aspm_configure_common_clock(link);
 
 	/* upstream component states */
-	pcie_aspm_get_cap_device(pdev, &link_state->support_state,
-		&link_state->l0s_upper_latency,
-		&link_state->l1_upper_latency,
-		&link_state->enabled_state);
+	pcie_aspm_get_cap_device(parent, &support, &l0s, &l1, &enabled);
+	link->aspm_support = support;
+	link->latency.l0s = l0s;
+	link->latency.l1 = l1;
+	link->aspm_enabled = enabled;
+
 	/* downstream component states, all functions have the same setting */
-	child_dev = list_entry(pdev->subordinate->devices.next, struct pci_dev,
-		bus_list);
-	pcie_aspm_get_cap_device(child_dev, &state,
-		&link_state->l0s_down_latency,
-		&link_state->l1_down_latency,
-		&tmp);
-	link_state->support_state &= state;
-	if (!link_state->support_state)
+	child = list_entry(linkbus->devices.next, struct pci_dev, bus_list);
+	pcie_aspm_get_cap_device(child, &support, &l0s, &l1, &enabled);
+	link->aspm_support &= support;
+	link->latency.l0s = max_t(u32, link->latency.l0s, l0s);
+	link->latency.l1 = max_t(u32, link->latency.l1, l1);
+
+	if (!link->aspm_support)
 		return;
-	link_state->enabled_state &= link_state->support_state;
-	link_state->bios_aspm_state = link_state->enabled_state;
+
+	link->aspm_enabled &= link->aspm_support;
+	link->aspm_default = link->aspm_enabled;
 
 	/* ENDPOINT states*/
-	list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
+	list_for_each_entry(child, &linkbus->devices, bus_list) {
 		int pos;
-		u32 reg32;
-		unsigned int latency;
-		struct endpoint_state *ep_state =
-			&link_state->endpoints[PCI_FUNC(child_dev->devfn)];
+		u32 reg32, encoding;
+		struct aspm_latency *acceptable =
+			&link->acceptable[PCI_FUNC(child->devfn)];
 
-		if (child_dev->pcie_type != PCI_EXP_TYPE_ENDPOINT &&
-			child_dev->pcie_type != PCI_EXP_TYPE_LEG_END)
+		if (child->pcie_type != PCI_EXP_TYPE_ENDPOINT &&
+		    child->pcie_type != PCI_EXP_TYPE_LEG_END)
 			continue;
 
-		pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
-		pci_read_config_dword(child_dev, pos + PCI_EXP_DEVCAP, &reg32);
-		latency = (reg32 & PCI_EXP_DEVCAP_L0S) >> 6;
-		latency = calc_L0S_latency(latency, 1);
-		ep_state->l0s_acceptable_latency = latency;
-		if (link_state->support_state & PCIE_LINK_STATE_L1) {
-			latency = (reg32 & PCI_EXP_DEVCAP_L1) >> 9;
-			latency = calc_L1_latency(latency, 1);
-			ep_state->l1_acceptable_latency = latency;
+		pos = pci_find_capability(child, PCI_CAP_ID_EXP);
+		pci_read_config_dword(child, pos + PCI_EXP_DEVCAP, &reg32);
+		encoding = (reg32 & PCI_EXP_DEVCAP_L0S) >> 6;
+		acceptable->l0s = calc_l0s_acceptable(encoding);
+		if (link->aspm_support & PCIE_LINK_STATE_L1) {
+			encoding = (reg32 & PCI_EXP_DEVCAP_L1) >> 9;
+			acceptable->l1 = calc_l1_acceptable(encoding);
 		}
 	}
 }
 
-static unsigned int __pcie_aspm_check_state_one(struct pci_dev *pdev,
-	unsigned int state)
-{
-	struct pci_dev *parent_dev, *tmp_dev;
-	unsigned int latency, l1_latency = 0;
-	struct pcie_link_state *link_state;
-	struct endpoint_state *ep_state;
-
-	parent_dev = pdev->bus->self;
-	link_state = parent_dev->link_state;
-	state &= link_state->support_state;
-	if (state == 0)
-		return 0;
-	ep_state = &link_state->endpoints[PCI_FUNC(pdev->devfn)];
-
-	/*
-	 * Check latency for endpoint device.
-	 * TBD: The latency from the endpoint to root complex vary per
-	 * switch's upstream link state above the device. Here we just do a
-	 * simple check which assumes all links above the device can be in L1
-	 * state, that is we just consider the worst case. If switch's upstream
-	 * link can't be put into L0S/L1, then our check is too strictly.
-	 */
-	tmp_dev = pdev;
-	while (state & (PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1)) {
-		parent_dev = tmp_dev->bus->self;
-		link_state = parent_dev->link_state;
-		if (state & PCIE_LINK_STATE_L0S) {
-			latency = max_t(unsigned int,
-					link_state->l0s_upper_latency,
-					link_state->l0s_down_latency);
-			if (latency > ep_state->l0s_acceptable_latency)
-				state &= ~PCIE_LINK_STATE_L0S;
-		}
-		if (state & PCIE_LINK_STATE_L1) {
-			latency = max_t(unsigned int,
-					link_state->l1_upper_latency,
-					link_state->l1_down_latency);
-			if (latency + l1_latency >
-					ep_state->l1_acceptable_latency)
-				state &= ~PCIE_LINK_STATE_L1;
-		}
-		if (!parent_dev->bus->self) /* parent_dev is a root port */
-			break;
-		else {
-			/*
-			 * parent_dev is the downstream port of a switch, make
-			 * tmp_dev the upstream port of the switch
-			 */
-			tmp_dev = parent_dev->bus->self;
-			/*
-			 * every switch on the path to root complex need 1 more
-			 * microsecond for L1. Spec doesn't mention L0S.
-			 */
-			if (state & PCIE_LINK_STATE_L1)
-				l1_latency += 1000;
-		}
+/**
+ * __pcie_aspm_check_state_one - check latency for endpoint device.
+ * @endpoint: pointer to the struct pci_dev of endpoint device
+ *
+ * TBD: The latency from the endpoint to root complex vary per switch's
+ * upstream link state above the device. Here we just do a simple check
+ * which assumes all links above the device can be in L1 state, that
+ * is we just consider the worst case. If switch's upstream link can't
+ * be put into L0S/L1, then our check is too strictly.
+ */
+static u32 __pcie_aspm_check_state_one(struct pci_dev *endpoint, u32 state)
+{
+	u32 l1_switch_latency = 0;
+	struct aspm_latency *acceptable;
+	struct pcie_link_state *link;
+
+	link = endpoint->bus->self->link_state;
+	state &= link->aspm_support;
+	acceptable = &link->acceptable[PCI_FUNC(endpoint->devfn)];
+
+	while (link && state) {
+		if ((state & PCIE_LINK_STATE_L0S) &&
+		    (link->latency.l0s > acceptable->l0s))
+			state &= ~PCIE_LINK_STATE_L0S;
+		if ((state & PCIE_LINK_STATE_L1) &&
+		    (link->latency.l1 + l1_switch_latency > acceptable->l1))
+			state &= ~PCIE_LINK_STATE_L1;
+		link = link->parent;
+		/*
+		 * Every switch on the path to root complex need 1
+		 * more microsecond for L1. Spec doesn't mention L0s.
+		 */
+		l1_switch_latency += 1000;
 	}
 	return state;
 }
 
-static unsigned int pcie_aspm_check_state(struct pci_dev *pdev,
-	unsigned int state)
+static u32 pcie_aspm_check_state(struct pcie_link_state *link, u32 state)
 {
-	struct pci_dev *child_dev;
+	pci_power_t power_state;
+	struct pci_dev *child;
+	struct pci_bus *linkbus = link->pdev->subordinate;
 
 	/* If no child, ignore the link */
-	if (list_empty(&pdev->subordinate->devices))
+	if (list_empty(&linkbus->devices))
 		return state;
-	list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
-		if (child_dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) {
-			/*
-			 * If downstream component of a link is pci bridge, we
-			 * disable ASPM for now for the link
-			 * */
-			state = 0;
-			break;
-		}
-		if ((child_dev->pcie_type != PCI_EXP_TYPE_ENDPOINT &&
-			child_dev->pcie_type != PCI_EXP_TYPE_LEG_END))
+
+	list_for_each_entry(child, &linkbus->devices, bus_list) {
+		/*
+		 * If downstream component of a link is pci bridge, we
+		 * disable ASPM for now for the link
+		 */
+		if (child->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE)
+			return 0;
+
+		if ((child->pcie_type != PCI_EXP_TYPE_ENDPOINT &&
+		     child->pcie_type != PCI_EXP_TYPE_LEG_END))
 			continue;
 		/* Device not in D0 doesn't need check latency */
-		if (child_dev->current_state == PCI_D1 ||
-			child_dev->current_state == PCI_D2 ||
-			child_dev->current_state == PCI_D3hot ||
-			child_dev->current_state == PCI_D3cold)
+		power_state = child->current_state;
+		if (power_state == PCI_D1 || power_state == PCI_D2 ||
+		    power_state == PCI_D3hot || power_state == PCI_D3cold)
 			continue;
-		state = __pcie_aspm_check_state_one(child_dev, state);
+		state = __pcie_aspm_check_state_one(child, state);
 	}
 	return state;
 }
@@ -482,90 +453,71 @@ static void __pcie_aspm_config_one_dev(struct pci_dev *pdev, unsigned int state)
 	pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
 }
 
-static void __pcie_aspm_config_link(struct pci_dev *pdev, unsigned int state)
+static void __pcie_aspm_config_link(struct pcie_link_state *link, u32 state)
 {
-	struct pci_dev *child_dev;
-	int valid = 1;
-	struct pcie_link_state *link_state = pdev->link_state;
+	struct pci_dev *child, *parent = link->pdev;
+	struct pci_bus *linkbus = parent->subordinate;
 
 	/* If no child, disable the link */
-	if (list_empty(&pdev->subordinate->devices))
+	if (list_empty(&linkbus->devices))
 		state = 0;
 	/*
-	 * if the downstream component has pci bridge function, don't do ASPM
-	 * now
+	 * If the downstream component has pci bridge function, don't
+	 * do ASPM now.
 	 */
-	list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
-		if (child_dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) {
-			valid = 0;
-			break;
-		}
+	list_for_each_entry(child, &linkbus->devices, bus_list) {
+		if (child->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE)
+			return;
 	}
-	if (!valid)
-		return;
-
 	/*
-	 * spec 2.0 suggests all functions should be configured the same
-	 * setting for ASPM. Enabling ASPM L1 should be done in upstream
-	 * component first and then downstream, and vice versa for disabling
-	 * ASPM L1. Spec doesn't mention L0S.
+	 * Spec 2.0 suggests all functions should be configured the
+	 * same setting for ASPM. Enabling ASPM L1 should be done in
+	 * upstream component first and then downstream, and vice
+	 * versa for disabling ASPM L1. Spec doesn't mention L0S.
 	 */
 	if (state & PCIE_LINK_STATE_L1)
-		__pcie_aspm_config_one_dev(pdev, state);
+		__pcie_aspm_config_one_dev(parent, state);
 
-	list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list)
-		__pcie_aspm_config_one_dev(child_dev, state);
+	list_for_each_entry(child, &linkbus->devices, bus_list)
+		__pcie_aspm_config_one_dev(child, state);
 
 	if (!(state & PCIE_LINK_STATE_L1))
-		__pcie_aspm_config_one_dev(pdev, state);
+		__pcie_aspm_config_one_dev(parent, state);
 
-	link_state->enabled_state = state;
+	link->aspm_enabled = state;
 }
 
-static struct pcie_link_state *get_root_port_link(struct pcie_link_state *link)
+/* Check the whole hierarchy, and configure each link in the hierarchy */
+static void __pcie_aspm_configure_link_state(struct pcie_link_state *link,
+					     u32 state)
 {
-	struct pcie_link_state *root_port_link = link;
-	while (root_port_link->parent)
-		root_port_link = root_port_link->parent;
-	return root_port_link;
-}
+	struct pcie_link_state *leaf, *root = link->root;
 
-/* check the whole hierarchy, and configure each link in the hierarchy */
-static void __pcie_aspm_configure_link_state(struct pci_dev *pdev,
-	unsigned int state)
-{
-	struct pcie_link_state *link_state = pdev->link_state;
-	struct pcie_link_state *root_port_link = get_root_port_link(link_state);
-	struct pcie_link_state *leaf;
+	state &= (PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1);
 
-	state &= PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1;
-
-	/* check all links who have specific root port link */
-	list_for_each_entry(leaf, &link_list, sibiling) {
-		if (!list_empty(&leaf->children) ||
-			get_root_port_link(leaf) != root_port_link)
+	/* Check all links who have specific root port link */
+	list_for_each_entry(leaf, &link_list, sibling) {
+		if (!list_empty(&leaf->children) || (leaf->root != root))
 			continue;
-		state = pcie_aspm_check_state(leaf->pdev, state);
+		state = pcie_aspm_check_state(leaf, state);
 	}
-	/* check root port link too in case it hasn't children */
-	state = pcie_aspm_check_state(root_port_link->pdev, state);
-
-	if (link_state->enabled_state == state)
+	/* Check root port link too in case it hasn't children */
+	state = pcie_aspm_check_state(root, state);
+	if (link->aspm_enabled == state)
 		return;
-
 	/*
-	 * we must change the hierarchy. See comments in
+	 * We must change the hierarchy. See comments in
 	 * __pcie_aspm_config_link for the order
 	 **/
 	if (state & PCIE_LINK_STATE_L1) {
-		list_for_each_entry(leaf, &link_list, sibiling) {
-			if (get_root_port_link(leaf) == root_port_link)
-				__pcie_aspm_config_link(leaf->pdev, state);
+		list_for_each_entry(leaf, &link_list, sibling) {
+			if (leaf->root == root)
+				__pcie_aspm_config_link(leaf, state);
 		}
 	} else {
-		list_for_each_entry_reverse(leaf, &link_list, sibiling) {
-			if (get_root_port_link(leaf) == root_port_link)
-				__pcie_aspm_config_link(leaf->pdev, state);
+		list_for_each_entry_reverse(leaf, &link_list, sibling) {
+			if (leaf->root == root)
+				__pcie_aspm_config_link(leaf, state);
 		}
 	}
 }
@@ -574,45 +526,42 @@ static void __pcie_aspm_configure_link_state(struct pci_dev *pdev,
  * pcie_aspm_configure_link_state: enable/disable PCI express link state
  * @pdev: the root port or switch downstream port
  */
-static void pcie_aspm_configure_link_state(struct pci_dev *pdev,
-	unsigned int state)
+static void pcie_aspm_configure_link_state(struct pcie_link_state *link,
+					   u32 state)
 {
 	down_read(&pci_bus_sem);
 	mutex_lock(&aspm_lock);
-	__pcie_aspm_configure_link_state(pdev, state);
+	__pcie_aspm_configure_link_state(link, state);
 	mutex_unlock(&aspm_lock);
 	up_read(&pci_bus_sem);
 }
 
-static void free_link_state(struct pci_dev *pdev)
+static void free_link_state(struct pcie_link_state *link)
 {
-	kfree(pdev->link_state);
-	pdev->link_state = NULL;
+	link->pdev->link_state = NULL;
+	kfree(link);
 }
 
 static int pcie_aspm_sanity_check(struct pci_dev *pdev)
 {
-	struct pci_dev *child_dev;
-	int child_pos;
+	struct pci_dev *child;
+	int pos;
 	u32 reg32;
-
 	/*
-	 * Some functions in a slot might not all be PCIE functions, very
-	 * strange. Disable ASPM for the whole slot
+	 * Some functions in a slot might not all be PCIE functions,
+	 * very strange. Disable ASPM for the whole slot
 	 */
-	list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
-		child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
-		if (!child_pos)
+	list_for_each_entry(child, &pdev->subordinate->devices, bus_list) {
+		pos = pci_find_capability(child, PCI_CAP_ID_EXP);
+		if (!pos)
 			return -EINVAL;
-
 		/*
 		 * Disable ASPM for pre-1.1 PCIe device, we follow MS to use
 		 * RBER bit to determine if a function is 1.1 version device
 		 */
-		pci_read_config_dword(child_dev, child_pos + PCI_EXP_DEVCAP,
-			&reg32);
+		pci_read_config_dword(child, pos + PCI_EXP_DEVCAP, &reg32);
 		if (!(reg32 & PCI_EXP_DEVCAP_RBER) && !aspm_force) {
-			dev_printk(KERN_INFO, &child_dev->dev, "disabling ASPM"
+			dev_printk(KERN_INFO, &child->dev, "disabling ASPM"
 				" on pre-1.1 PCIe device.  You can enable it"
 				" with 'pcie_aspm=force'\n");
 			return -EINVAL;
@@ -621,6 +570,47 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev)
 	return 0;
 }
 
+static struct pcie_link_state *pcie_aspm_setup_link_state(struct pci_dev *pdev)
+{
+	struct pcie_link_state *link;
+	int blacklist = !!pcie_aspm_sanity_check(pdev);
+
+	link = kzalloc(sizeof(*link), GFP_KERNEL);
+	if (!link)
+		return NULL;
+	INIT_LIST_HEAD(&link->sibling);
+	INIT_LIST_HEAD(&link->children);
+	INIT_LIST_HEAD(&link->link);
+	link->pdev = pdev;
+	if (pdev->pcie_type == PCI_EXP_TYPE_DOWNSTREAM) {
+		struct pcie_link_state *parent;
+		parent = pdev->bus->parent->self->link_state;
+		if (!parent) {
+			kfree(link);
+			return NULL;
+		}
+		link->parent = parent;
+		list_add(&link->link, &parent->children);
+	}
+	/* Setup a pointer to the root port link */
+	if (!link->parent)
+		link->root = link;
+	else
+		link->root = link->parent->root;
+
+	list_add(&link->sibling, &link_list);
+
+	pdev->link_state = link;
+
+	/* Check ASPM capability */
+	pcie_aspm_cap_init(link, blacklist);
+
+	/* Check Clock PM capability */
+	pcie_clkpm_cap_init(link, blacklist);
+
+	return link;
+}
+
 /*
  * pcie_aspm_init_link_state: Initiate PCI express link state.
  * It is called after the pcie and its children devices are scaned.
@@ -628,75 +618,47 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev)
  */
 void pcie_aspm_init_link_state(struct pci_dev *pdev)
 {
-	unsigned int state;
-	struct pcie_link_state *link_state;
-	int error = 0;
-	int blacklist;
+	u32 state;
+	struct pcie_link_state *link;
 
 	if (aspm_disabled || !pdev->is_pcie || pdev->link_state)
 		return;
 	if (pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT &&
-		pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM)
+	    pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM)
+		return;
+
+	/* VIA has a strange chipset, root port is under a bridge */
+	if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT &&
+	    pdev->bus->self)
 		return;
+
 	down_read(&pci_bus_sem);
 	if (list_empty(&pdev->subordinate->devices))
 		goto out;
 
-	blacklist = !!pcie_aspm_sanity_check(pdev);
-
 	mutex_lock(&aspm_lock);
-
-	link_state = kzalloc(sizeof(*link_state), GFP_KERNEL);
-	if (!link_state)
-		goto unlock_out;
-
-	link_state->downstream_has_switch = pcie_aspm_downstream_has_switch(pdev);
-	INIT_LIST_HEAD(&link_state->children);
-	INIT_LIST_HEAD(&link_state->link);
-	if (pdev->bus->self) {/* this is a switch */
-		struct pcie_link_state *parent_link_state;
-
-		parent_link_state = pdev->bus->parent->self->link_state;
-		if (!parent_link_state) {
-			kfree(link_state);
-			goto unlock_out;
-		}
-		list_add(&link_state->link, &parent_link_state->children);
-		link_state->parent = parent_link_state;
-	}
-
-	pdev->link_state = link_state;
-
-	if (!blacklist) {
-		pcie_aspm_configure_common_clock(pdev);
-		pcie_aspm_cap_init(pdev);
+	link = pcie_aspm_setup_link_state(pdev);
+	if (!link)
+		goto unlock;
+	/*
+	 * Setup initial ASPM state
+	 *
+	 * If link has switch, delay the link config. The leaf link
+	 * initialization will config the whole hierarchy. But we must
+	 * make sure BIOS doesn't set unsupported link state.
+	 */
+	if (pcie_aspm_downstream_has_switch(link)) {
+		state = pcie_aspm_check_state(link, link->aspm_default);
+		__pcie_aspm_config_link(link, state);
 	} else {
-		link_state->enabled_state = PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1;
-		link_state->bios_aspm_state = 0;
-		/* Set support state to 0, so we will disable ASPM later */
-		link_state->support_state = 0;
+		state = policy_to_aspm_state(link);
+		__pcie_aspm_configure_link_state(link, state);
 	}
 
-	link_state->pdev = pdev;
-	list_add(&link_state->sibiling, &link_list);
-
-	if (link_state->downstream_has_switch) {
-		/*
-		 * If link has switch, delay the link config. The leaf link
-		 * initialization will config the whole hierarchy. but we must
-		 * make sure BIOS doesn't set unsupported link state
-		 **/
-		state = pcie_aspm_check_state(pdev, link_state->bios_aspm_state);
-		__pcie_aspm_config_link(pdev, state);
-	} else
-		__pcie_aspm_configure_link_state(pdev,
-			policy_to_aspm_state(pdev));
-
-	pcie_check_clock_pm(pdev, blacklist);
-
-unlock_out:
-	if (error)
-		free_link_state(pdev);
+	/* Setup initial Clock PM state */
+	state = (link->clkpm_capable) ? policy_to_clkpm_state(link) : 0;
+	pcie_set_clkpm(link, state);
+unlock:
 	mutex_unlock(&aspm_lock);
 out:
 	up_read(&pci_bus_sem);
@@ -725,11 +687,11 @@ void pcie_aspm_exit_link_state(struct pci_dev *pdev)
 
 	/* All functions are removed, so just disable ASPM for the link */
 	__pcie_aspm_config_one_dev(parent, 0);
-	list_del(&link_state->sibiling);
+	list_del(&link_state->sibling);
 	list_del(&link_state->link);
 	/* Clock PM is for endpoint device */
 
-	free_link_state(parent);
+	free_link_state(link_state);
 out:
 	mutex_unlock(&aspm_lock);
 	up_read(&pci_bus_sem);
@@ -749,7 +711,7 @@ void pcie_aspm_pm_state_change(struct pci_dev *pdev)
 	 * devices changed PM state, we should recheck if latency meets all
 	 * functions' requirement
 	 */
-	pcie_aspm_configure_link_state(pdev, link_state->enabled_state);
+	pcie_aspm_configure_link_state(link_state, link_state->aspm_enabled);
 }
 
 /*
@@ -772,14 +734,12 @@ void pci_disable_link_state(struct pci_dev *pdev, int state)
 	down_read(&pci_bus_sem);
 	mutex_lock(&aspm_lock);
 	link_state = parent->link_state;
-	link_state->support_state &=
-		~(state & (PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1));
-	if (state & PCIE_LINK_STATE_CLKPM)
-		link_state->clk_pm_capable = 0;
-
-	__pcie_aspm_configure_link_state(parent, link_state->enabled_state);
-	if (!link_state->clk_pm_capable && link_state->clk_pm_enabled)
-		pcie_set_clock_pm(parent, 0);
+	link_state->aspm_support &= ~state;
+	__pcie_aspm_configure_link_state(link_state, link_state->aspm_enabled);
+	if (state & PCIE_LINK_STATE_CLKPM) {
+		link_state->clkpm_capable = 0;
+		pcie_set_clkpm(link_state, 0);
+	}
 	mutex_unlock(&aspm_lock);
 	up_read(&pci_bus_sem);
 }
@@ -788,7 +748,6 @@ EXPORT_SYMBOL(pci_disable_link_state);
 static int pcie_aspm_set_policy(const char *val, struct kernel_param *kp)
 {
 	int i;
-	struct pci_dev *pdev;
 	struct pcie_link_state *link_state;
 
 	for (i = 0; i < ARRAY_SIZE(policy_str); i++)
@@ -802,14 +761,10 @@ static int pcie_aspm_set_policy(const char *val, struct kernel_param *kp)
 	down_read(&pci_bus_sem);
 	mutex_lock(&aspm_lock);
 	aspm_policy = i;
-	list_for_each_entry(link_state, &link_list, sibiling) {
-		pdev = link_state->pdev;
-		__pcie_aspm_configure_link_state(pdev,
-			policy_to_aspm_state(pdev));
-		if (link_state->clk_pm_capable &&
-		    link_state->clk_pm_enabled != policy_to_clkpm_state(pdev))
-			pcie_set_clock_pm(pdev, policy_to_clkpm_state(pdev));
-
+	list_for_each_entry(link_state, &link_list, sibling) {
+		__pcie_aspm_configure_link_state(link_state,
+			policy_to_aspm_state(link_state));
+		pcie_set_clkpm(link_state, policy_to_clkpm_state(link_state));
 	}
 	mutex_unlock(&aspm_lock);
 	up_read(&pci_bus_sem);
@@ -838,7 +793,7 @@ static ssize_t link_state_show(struct device *dev,
 	struct pci_dev *pci_device = to_pci_dev(dev);
 	struct pcie_link_state *link_state = pci_device->link_state;
 
-	return sprintf(buf, "%d\n", link_state->enabled_state);
+	return sprintf(buf, "%d\n", link_state->aspm_enabled);
 }
 
 static ssize_t link_state_store(struct device *dev,
@@ -846,7 +801,7 @@ static ssize_t link_state_store(struct device *dev,
 		const char *buf,
 		size_t n)
 {
-	struct pci_dev *pci_device = to_pci_dev(dev);
+	struct pci_dev *pdev = to_pci_dev(dev);
 	int state;
 
 	if (n < 1)
@@ -854,7 +809,7 @@ static ssize_t link_state_store(struct device *dev,
 	state = buf[0]-'0';
 	if (state >= 0 && state <= 3) {
 		/* setup link aspm state */
-		pcie_aspm_configure_link_state(pci_device, state);
+		pcie_aspm_configure_link_state(pdev->link_state, state);
 		return n;
 	}
 
@@ -868,7 +823,7 @@ static ssize_t clk_ctl_show(struct device *dev,
 	struct pci_dev *pci_device = to_pci_dev(dev);
 	struct pcie_link_state *link_state = pci_device->link_state;
 
-	return sprintf(buf, "%d\n", link_state->clk_pm_enabled);
+	return sprintf(buf, "%d\n", link_state->clkpm_enabled);
 }
 
 static ssize_t clk_ctl_store(struct device *dev,
@@ -876,7 +831,7 @@ static ssize_t clk_ctl_store(struct device *dev,
 		const char *buf,
 		size_t n)
 {
-	struct pci_dev *pci_device = to_pci_dev(dev);
+	struct pci_dev *pdev = to_pci_dev(dev);
 	int state;
 
 	if (n < 1)
@@ -885,7 +840,7 @@ static ssize_t clk_ctl_store(struct device *dev,
 
 	down_read(&pci_bus_sem);
 	mutex_lock(&aspm_lock);
-	pcie_set_clock_pm(pci_device, !!state);
+	pcie_set_clkpm_nocheck(pdev->link_state, !!state);
 	mutex_unlock(&aspm_lock);
 	up_read(&pci_bus_sem);
 
@@ -904,10 +859,10 @@ void pcie_aspm_create_sysfs_dev_files(struct pci_dev *pdev)
 		pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM) || !link_state)
 		return;
 
-	if (link_state->support_state)
+	if (link_state->aspm_support)
 		sysfs_add_file_to_group(&pdev->dev.kobj,
 			&dev_attr_link_state.attr, power_group);
-	if (link_state->clk_pm_capable)
+	if (link_state->clkpm_capable)
 		sysfs_add_file_to_group(&pdev->dev.kobj,
 			&dev_attr_clk_ctl.attr, power_group);
 }
@@ -920,10 +875,10 @@ void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev)
 		pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM) || !link_state)
 		return;
 
-	if (link_state->support_state)
+	if (link_state->aspm_support)
 		sysfs_remove_file_from_group(&pdev->dev.kobj,
 			&dev_attr_link_state.attr, power_group);
-	if (link_state->clk_pm_capable)
+	if (link_state->clkpm_capable)
 		sysfs_remove_file_from_group(&pdev->dev.kobj,
 			&dev_attr_clk_ctl.attr, power_group);
 }
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index f1ae2475fff..40e75f6a505 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -193,7 +193,7 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 		res->flags |= pci_calc_resource_flags(l) | IORESOURCE_SIZEALIGN;
 		if (type == pci_bar_io) {
 			l &= PCI_BASE_ADDRESS_IO_MASK;
-			mask = PCI_BASE_ADDRESS_IO_MASK & 0xffff;
+			mask = PCI_BASE_ADDRESS_IO_MASK & IO_SPACE_LIMIT;
 		} else {
 			l &= PCI_BASE_ADDRESS_MEM_MASK;
 			mask = (u32)PCI_BASE_ADDRESS_MEM_MASK;
@@ -237,6 +237,8 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 			dev_printk(KERN_DEBUG, &dev->dev,
 				"reg %x 64bit mmio: %pR\n", pos, res);
 		}
+
+		res->flags |= IORESOURCE_MEM_64;
 	} else {
 		sz = pci_size(l, sz, mask);
 
@@ -287,7 +289,7 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
 	struct resource *res;
 	int i;
 
-	if (!child->parent)	/* It's a host bus, nothing to read */
+	if (pci_is_root_bus(child))	/* It's a host bus, nothing to read */
 		return;
 
 	if (dev->transparent) {
@@ -362,7 +364,10 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
 		}
 	}
 	if (base <= limit) {
-		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH;
+		res->flags = (mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) |
+					 IORESOURCE_MEM | IORESOURCE_PREFETCH;
+		if (res->flags & PCI_PREF_RANGE_TYPE_64)
+			res->flags |= IORESOURCE_MEM_64;
 		res->start = base;
 		res->end = limit + 0xfffff;
 		dev_printk(KERN_DEBUG, &dev->dev, "bridge %sbit mmio pref: %pR\n",
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index bd4253f93d5..56552d74abe 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1133,6 +1133,7 @@ static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev)
 			switch (dev->subsystem_device) {
 			case 0x1751: /* M2N notebook */
 			case 0x1821: /* M5N notebook */
+			case 0x1897: /* A6L notebook */
 				asus_hides_smbus = 1;
 			}
 		else if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
@@ -1163,6 +1164,7 @@ static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev)
 			switch (dev->subsystem_device) {
 			case 0x12bc: /* HP D330L */
 			case 0x12bd: /* HP D530 */
+			case 0x006a: /* HP Compaq nx9500 */
 				asus_hides_smbus = 1;
 			}
 		else if (dev->device == PCI_DEVICE_ID_INTEL_82875_HB)
@@ -2016,6 +2018,28 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
 			PCI_DEVICE_ID_NX2_5709S,
 			quirk_brcm_570x_limit_vpd);
 
+/* Originally in EDAC sources for i82875P:
+ * Intel tells BIOS developers to hide device 6 which
+ * configures the overflow device access containing
+ * the DRBs - this is where we expose device 6.
+ * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm
+ */
+static void __devinit quirk_unhide_mch_dev6(struct pci_dev *dev)
+{
+	u8 reg;
+
+	if (pci_read_config_byte(dev, 0xF4, &reg) == 0 && !(reg & 0x02)) {
+		dev_info(&dev->dev, "Enabling MCH 'Overflow' Device\n");
+		pci_write_config_byte(dev, 0xF4, reg | 0x02);
+	}
+}
+
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB,
+			quirk_unhide_mch_dev6);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB,
+			quirk_unhide_mch_dev6);
+
+
 #ifdef CONFIG_PCI_MSI
 /* Some chipsets do not support MSI. We cannot easily rely on setting
  * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually
diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c
index 86503c14ce7..176615e7231 100644
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c
@@ -32,8 +32,6 @@ static void pci_stop_dev(struct pci_dev *dev)
 
 static void pci_destroy_dev(struct pci_dev *dev)
 {
-	pci_stop_dev(dev);
-
 	/* Remove the device from the device lists, and prevent any further
 	 * list accesses from this device */
 	down_write(&pci_bus_sem);
diff --git a/drivers/pci/search.c b/drivers/pci/search.c
index 710d4ea6956..e8cb5051c31 100644
--- a/drivers/pci/search.c
+++ b/drivers/pci/search.c
@@ -29,7 +29,7 @@ pci_find_upstream_pcie_bridge(struct pci_dev *pdev)
 	if (pdev->is_pcie)
 		return NULL;
 	while (1) {
-		if (!pdev->bus->parent)
+		if (pci_is_root_bus(pdev->bus))
 			break;
 		pdev = pdev->bus->self;
 		/* a p2p bridge */
@@ -115,36 +115,6 @@ pci_find_next_bus(const struct pci_bus *from)
 
 #ifdef CONFIG_PCI_LEGACY
 /**
- * pci_find_slot - locate PCI device from a given PCI slot
- * @bus: number of PCI bus on which desired PCI device resides
- * @devfn: encodes number of PCI slot in which the desired PCI
- * device resides and the logical device number within that slot
- * in case of multi-function devices.
- *
- * Given a PCI bus and slot/function number, the desired PCI device
- * is located in system global list of PCI devices.  If the device
- * is found, a pointer to its data structure is returned.  If no
- * device is found, %NULL is returned.
- *
- * NOTE: Do not use this function any more; use pci_get_slot() instead, as
- * the PCI device returned by this function can disappear at any moment in
- * time.
- */
-struct pci_dev *pci_find_slot(unsigned int bus, unsigned int devfn)
-{
-	struct pci_dev *dev = NULL;
-
-	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
-		if (dev->bus->number == bus && dev->devfn == devfn) {
-			pci_dev_put(dev);
-			return dev;
-		}
-	}
-	return NULL;
-}
-EXPORT_SYMBOL(pci_find_slot);
-
-/**
  * pci_find_device - begin or continue searching for a PCI device by vendor/device id
  * @vendor: PCI vendor id to match, or %PCI_ANY_ID to match all vendor ids
  * @device: PCI device id to match, or %PCI_ANY_ID to match all device ids
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index a00f85471b6..b636e245445 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -58,7 +58,6 @@ static void pbus_assign_resources_sorted(const struct pci_bus *bus)
 		res = list->res;
 		idx = res - &list->dev->resource[0];
 		if (pci_assign_resource(list->dev, idx)) {
-			/* FIXME: get rid of this */
 			res->start = 0;
 			res->end = 0;
 			res->flags = 0;
@@ -143,6 +142,7 @@ static void pci_setup_bridge(struct pci_bus *bus)
 	struct pci_dev *bridge = bus->self;
 	struct pci_bus_region region;
 	u32 l, bu, lu, io_upper16;
+	int pref_mem64;
 
 	if (pci_is_enabled(bridge))
 		return;
@@ -198,16 +198,22 @@ static void pci_setup_bridge(struct pci_bus *bus)
 	pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, 0);
 
 	/* Set up PREF base/limit. */
+	pref_mem64 = 0;
 	bu = lu = 0;
 	pcibios_resource_to_bus(bridge, &region, bus->resource[2]);
 	if (bus->resource[2]->flags & IORESOURCE_PREFETCH) {
+		int width = 8;
 		l = (region.start >> 16) & 0xfff0;
 		l |= region.end & 0xfff00000;
-		bu = upper_32_bits(region.start);
-		lu = upper_32_bits(region.end);
-		dev_info(&bridge->dev, "  PREFETCH window: %#016llx-%#016llx\n",
-		    (unsigned long long)region.start,
-		    (unsigned long long)region.end);
+		if (bus->resource[2]->flags & IORESOURCE_MEM_64) {
+			pref_mem64 = 1;
+			bu = upper_32_bits(region.start);
+			lu = upper_32_bits(region.end);
+			width = 16;
+		}
+		dev_info(&bridge->dev, "  PREFETCH window: %#0*llx-%#0*llx\n",
+				width, (unsigned long long)region.start,
+				width, (unsigned long long)region.end);
 	}
 	else {
 		l = 0x0000fff0;
@@ -215,9 +221,11 @@ static void pci_setup_bridge(struct pci_bus *bus)
 	}
 	pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, l);
 
-	/* Set the upper 32 bits of PREF base & limit. */
-	pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, bu);
-	pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, lu);
+	if (pref_mem64) {
+		/* Set the upper 32 bits of PREF base & limit. */
+		pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, bu);
+		pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, lu);
+	}
 
 	pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, bus->bridge_ctl);
 }
@@ -255,8 +263,25 @@ static void pci_bridge_check_ranges(struct pci_bus *bus)
 		pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem);
 		pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, 0x0);
 	}
-	if (pmem)
+	if (pmem) {
 		b_res[2].flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH;
+		if ((pmem & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64)
+			b_res[2].flags |= IORESOURCE_MEM_64;
+	}
+
+	/* double check if bridge does support 64 bit pref */
+	if (b_res[2].flags & IORESOURCE_MEM_64) {
+		u32 mem_base_hi, tmp;
+		pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32,
+					 &mem_base_hi);
+		pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
+					       0xffffffff);
+		pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32, &tmp);
+		if (!tmp)
+			b_res[2].flags &= ~IORESOURCE_MEM_64;
+		pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
+				       mem_base_hi);
+	}
 }
 
 /* Helper function for sizing routines: find first available
@@ -336,6 +361,7 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, unsigned long
 	resource_size_t aligns[12];	/* Alignments from 1Mb to 2Gb */
 	int order, max_order;
 	struct resource *b_res = find_free_bus_resource(bus, type);
+	unsigned int mem64_mask = 0;
 
 	if (!b_res)
 		return 0;
@@ -344,9 +370,12 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, unsigned long
 	max_order = 0;
 	size = 0;
 
+	mem64_mask = b_res->flags & IORESOURCE_MEM_64;
+	b_res->flags &= ~IORESOURCE_MEM_64;
+
 	list_for_each_entry(dev, &bus->devices, bus_list) {
 		int i;
-		
+
 		for (i = 0; i < PCI_NUM_RESOURCES; i++) {
 			struct resource *r = &dev->resource[i];
 			resource_size_t r_size;
@@ -372,6 +401,7 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, unsigned long
 				aligns[order] += align;
 			if (order > max_order)
 				max_order = order;
+			mem64_mask &= r->flags & IORESOURCE_MEM_64;
 		}
 	}
 
@@ -396,6 +426,7 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, unsigned long
 	b_res->start = min_align;
 	b_res->end = size + min_align - 1;
 	b_res->flags |= IORESOURCE_STARTALIGN;
+	b_res->flags |= mem64_mask;
 	return 1;
 }
 
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 3039fcb86af..b711fb7181e 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -99,11 +99,11 @@ void pci_update_resource(struct pci_dev *dev, int resno)
 int pci_claim_resource(struct pci_dev *dev, int resource)
 {
 	struct resource *res = &dev->resource[resource];
-	struct resource *root = NULL;
+	struct resource *root;
 	char *dtype = resource < PCI_BRIDGE_RESOURCES ? "device" : "bridge";
 	int err;
 
-	root = pcibios_select_root(dev, res);
+	root = pci_find_parent_resource(dev, res);
 
 	err = -EINVAL;
 	if (root != NULL)
@@ -135,23 +135,16 @@ void pci_disable_bridge_window(struct pci_dev *dev)
 }
 #endif	/* CONFIG_PCI_QUIRKS */
 
-int pci_assign_resource(struct pci_dev *dev, int resno)
+static int __pci_assign_resource(struct pci_bus *bus, struct pci_dev *dev,
+				 int resno)
 {
-	struct pci_bus *bus = dev->bus;
 	struct resource *res = dev->resource + resno;
 	resource_size_t size, min, align;
 	int ret;
 
 	size = resource_size(res);
 	min = (res->flags & IORESOURCE_IO) ? PCIBIOS_MIN_IO : PCIBIOS_MIN_MEM;
-
 	align = resource_alignment(res);
-	if (!align) {
-		dev_info(&dev->dev, "BAR %d: can't allocate resource (bogus "
-			"alignment) %pR flags %#lx\n",
-			resno, res, res->flags);
-		return -EINVAL;
-	}
 
 	/* First, try exact prefetching match.. */
 	ret = pci_bus_alloc_resource(bus, res, size, align, min,
@@ -169,10 +162,7 @@ int pci_assign_resource(struct pci_dev *dev, int resno)
 					     pcibios_align_resource, dev);
 	}
 
-	if (ret) {
-		dev_info(&dev->dev, "BAR %d: can't allocate %s resource %pR\n",
-			resno, res->flags & IORESOURCE_IO ? "I/O" : "mem", res);
-	} else {
+	if (!ret) {
 		res->flags &= ~IORESOURCE_STARTALIGN;
 		if (resno < PCI_BRIDGE_RESOURCES)
 			pci_update_resource(dev, resno);
@@ -181,6 +171,39 @@ int pci_assign_resource(struct pci_dev *dev, int resno)
 	return ret;
 }
 
+int pci_assign_resource(struct pci_dev *dev, int resno)
+{
+	struct resource *res = dev->resource + resno;
+	resource_size_t align;
+	struct pci_bus *bus;
+	int ret;
+
+	align = resource_alignment(res);
+	if (!align) {
+		dev_info(&dev->dev, "BAR %d: can't allocate resource (bogus "
+			"alignment) %pR flags %#lx\n",
+			resno, res, res->flags);
+		return -EINVAL;
+	}
+
+	bus = dev->bus;
+	while ((ret = __pci_assign_resource(bus, dev, resno))) {
+		if (bus->parent && bus->self->transparent)
+			bus = bus->parent;
+		else
+			bus = NULL;
+		if (bus)
+			continue;
+		break;
+	}
+
+	if (ret)
+		dev_info(&dev->dev, "BAR %d: can't allocate %s resource %pR\n",
+			resno, res->flags & IORESOURCE_IO ? "I/O" : "mem", res);
+
+	return ret;
+}
+
 #if 0
 int pci_assign_resource_fixed(struct pci_dev *dev, int resno)
 {
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index fe95ce20bcb..eddb0748b0e 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -307,6 +307,45 @@ void pci_destroy_slot(struct pci_slot *slot)
 }
 EXPORT_SYMBOL_GPL(pci_destroy_slot);
 
+#if defined(CONFIG_HOTPLUG_PCI) || defined(CONFIG_HOTPLUG_PCI_MODULE)
+#include <linux/pci_hotplug.h>
+/**
+ * pci_hp_create_link - create symbolic link to the hotplug driver module.
+ * @slot: struct pci_slot
+ *
+ * Helper function for pci_hotplug_core.c to create symbolic link to
+ * the hotplug driver module.
+ */
+void pci_hp_create_module_link(struct pci_slot *pci_slot)
+{
+	struct hotplug_slot *slot = pci_slot->hotplug;
+	struct kobject *kobj = NULL;
+	int no_warn;
+
+	if (!slot || !slot->ops)
+		return;
+	kobj = kset_find_obj(module_kset, slot->ops->mod_name);
+	if (!kobj)
+		return;
+	no_warn = sysfs_create_link(&pci_slot->kobj, kobj, "module");
+	kobject_put(kobj);
+}
+EXPORT_SYMBOL_GPL(pci_hp_create_module_link);
+
+/**
+ * pci_hp_remove_link - remove symbolic link to the hotplug driver module.
+ * @slot: struct pci_slot
+ *
+ * Helper function for pci_hotplug_core.c to remove symbolic link to
+ * the hotplug driver module.
+ */
+void pci_hp_remove_module_link(struct pci_slot *pci_slot)
+{
+	sysfs_remove_link(&pci_slot->kobj, "module");
+}
+EXPORT_SYMBOL_GPL(pci_hp_remove_module_link);
+#endif
+
 static int pci_slot_init(void)
 {
 	struct kset *pci_bus_kset;
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 09a503e5da6..be2fd6f9163 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -958,12 +958,12 @@ static void acer_rfkill_update(struct work_struct *ignored)
 
 	status = get_u32(&state, ACER_CAP_WIRELESS);
 	if (ACPI_SUCCESS(status))
-		rfkill_set_sw_state(wireless_rfkill, !!state);
+		rfkill_set_sw_state(wireless_rfkill, !state);
 
 	if (has_cap(ACER_CAP_BLUETOOTH)) {
 		status = get_u32(&state, ACER_CAP_BLUETOOTH);
 		if (ACPI_SUCCESS(status))
-			rfkill_set_sw_state(bluetooth_rfkill, !!state);
+			rfkill_set_sw_state(bluetooth_rfkill, !state);
 	}
 
 	schedule_delayed_work(&acer_rfkill_work, round_jiffies_relative(HZ));
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index 2faf0e14f05..74909c4aaee 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -177,7 +177,7 @@ dell_send_request(struct calling_interface_buffer *buffer, int class,
 static int dell_rfkill_set(void *data, bool blocked)
 {
 	struct calling_interface_buffer buffer;
-	int disable = blocked ? 0 : 1;
+	int disable = blocked ? 1 : 0;
 	unsigned long radio = (unsigned long)data;
 
 	memset(&buffer, 0, sizeof(struct calling_interface_buffer));
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 03bf522bd7a..8153b3e5918 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -180,6 +180,7 @@ static struct key_entry eeepc_keymap[] = {
  */
 static int eeepc_hotk_add(struct acpi_device *device);
 static int eeepc_hotk_remove(struct acpi_device *device, int type);
+static int eeepc_hotk_resume(struct acpi_device *device);
 
 static const struct acpi_device_id eeepc_device_ids[] = {
 	{EEEPC_HOTK_HID, 0},
@@ -194,6 +195,7 @@ static struct acpi_driver eeepc_hotk_driver = {
 	.ops = {
 		.add = eeepc_hotk_add,
 		.remove = eeepc_hotk_remove,
+		.resume = eeepc_hotk_resume,
 	},
 };
 
@@ -512,15 +514,12 @@ static int notify_brn(void)
 	return -1;
 }
 
-static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
+static void eeepc_rfkill_hotplug(void)
 {
 	struct pci_dev *dev;
 	struct pci_bus *bus = pci_find_bus(0, 1);
 	bool blocked;
 
-	if (event != ACPI_NOTIFY_BUS_CHECK)
-		return;
-
 	if (!bus) {
 		printk(EEEPC_WARNING "Unable to find PCI bus 1?\n");
 		return;
@@ -551,6 +550,14 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
 	rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill, blocked);
 }
 
+static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
+{
+	if (event != ACPI_NOTIFY_BUS_CHECK)
+		return;
+
+	eeepc_rfkill_hotplug();
+}
+
 static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data)
 {
 	static struct key_entry *key;
@@ -675,8 +682,8 @@ static int eeepc_hotk_add(struct acpi_device *device)
 		if (!ehotk->eeepc_wlan_rfkill)
 			goto wlan_fail;
 
-		rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill,
-				    get_acpi(CM_ASL_WLAN) != 1);
+		rfkill_init_sw_state(ehotk->eeepc_wlan_rfkill,
+				     get_acpi(CM_ASL_WLAN) != 1);
 		result = rfkill_register(ehotk->eeepc_wlan_rfkill);
 		if (result)
 			goto wlan_fail;
@@ -693,8 +700,8 @@ static int eeepc_hotk_add(struct acpi_device *device)
 		if (!ehotk->eeepc_bluetooth_rfkill)
 			goto bluetooth_fail;
 
-		rfkill_set_sw_state(ehotk->eeepc_bluetooth_rfkill,
-				    get_acpi(CM_ASL_BLUETOOTH) != 1);
+		rfkill_init_sw_state(ehotk->eeepc_bluetooth_rfkill,
+				     get_acpi(CM_ASL_BLUETOOTH) != 1);
 		result = rfkill_register(ehotk->eeepc_bluetooth_rfkill);
 		if (result)
 			goto bluetooth_fail;
@@ -734,6 +741,33 @@ static int eeepc_hotk_remove(struct acpi_device *device, int type)
 	return 0;
 }
 
+static int eeepc_hotk_resume(struct acpi_device *device)
+{
+	if (ehotk->eeepc_wlan_rfkill) {
+		bool wlan;
+
+		/* Workaround - it seems that _PTS disables the wireless
+		   without notification or changing the value read by WLAN.
+		   Normally this is fine because the correct value is restored
+		   from the non-volatile storage on resume, but we need to do
+		   it ourself if case suspend is aborted, or we lose wireless.
+		 */
+		wlan = get_acpi(CM_ASL_WLAN);
+		set_acpi(CM_ASL_WLAN, wlan);
+
+		rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill,
+				    wlan != 1);
+
+		eeepc_rfkill_hotplug();
+	}
+
+	if (ehotk->eeepc_bluetooth_rfkill)
+		rfkill_set_sw_state(ehotk->eeepc_bluetooth_rfkill,
+				    get_acpi(CM_ASL_BLUETOOTH) != 1);
+
+	return 0;
+}
+
 /*
  * Hwmon
  */
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index e48d9a4506f..dafaa4a92df 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -1133,8 +1133,9 @@ static void sony_nc_rfkill_update()
 			continue;
 
 		if (hwblock) {
-			if (rfkill_set_hw_state(sony_rfkill_devices[i], true))
-				sony_nc_rfkill_set((void *)i, true);
+			if (rfkill_set_hw_state(sony_rfkill_devices[i], true)) {
+				/* we already know we're blocked */
+			}
 			continue;
 		}
 
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 86e958539f4..40d64c03278 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -1163,8 +1163,8 @@ static int __init tpacpi_new_rfkill(const enum tpacpi_rfk_id id,
 {
 	struct tpacpi_rfk *atp_rfk;
 	int res;
-	bool initial_sw_state = false;
-	int initial_sw_status;
+	bool sw_state = false;
+	int sw_status;
 
 	BUG_ON(id >= TPACPI_RFK_SW_MAX || tpacpi_rfkill_switches[id]);
 
@@ -1185,17 +1185,17 @@ static int __init tpacpi_new_rfkill(const enum tpacpi_rfk_id id,
 	atp_rfk->id = id;
 	atp_rfk->ops = tp_rfkops;
 
-	initial_sw_status = (tp_rfkops->get_status)();
-	if (initial_sw_status < 0) {
+	sw_status = (tp_rfkops->get_status)();
+	if (sw_status < 0) {
 		printk(TPACPI_ERR
 			"failed to read initial state for %s, error %d\n",
-			name, initial_sw_status);
+			name, sw_status);
 	} else {
-		initial_sw_state = (initial_sw_status == TPACPI_RFK_RADIO_OFF);
+		sw_state = (sw_status == TPACPI_RFK_RADIO_OFF);
 		if (set_default) {
 			/* try to keep the initial state, since we ask the
 			 * firmware to preserve it across S5 in NVRAM */
-			rfkill_set_sw_state(atp_rfk->rfkill, initial_sw_state);
+			rfkill_init_sw_state(atp_rfk->rfkill, sw_state);
 		}
 	}
 	rfkill_set_hw_state(atp_rfk->rfkill, tpacpi_rfk_check_hwblock_state());
diff --git a/drivers/pps/Kconfig b/drivers/pps/Kconfig
new file mode 100644
index 00000000000..cc2eb8edb51
--- /dev/null
+++ b/drivers/pps/Kconfig
@@ -0,0 +1,33 @@
+#
+# PPS support configuration
+#
+
+menu "PPS support"
+
+config PPS
+	tristate "PPS support"
+	depends on EXPERIMENTAL
+	---help---
+	  PPS (Pulse Per Second) is a special pulse provided by some GPS
+	  antennae. Userland can use it to get a high-precision time
+	  reference.
+
+	  Some antennae's PPS signals are connected with the CD (Carrier
+	  Detect) pin of the serial line they use to communicate with the
+	  host. In this case use the SERIAL_LINE client support.
+
+	  Some antennae's PPS signals are connected with some special host
+	  inputs so you have to enable the corresponding client support.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pps_core.ko.
+
+config PPS_DEBUG
+	bool "PPS debugging messages"
+	depends on PPS
+	help
+	  Say Y here if you want the PPS support to produce a bunch of debug
+	  messages to the system log.  Select this if you are having a
+	  problem with PPS support and want to see more of what is going on.
+
+endmenu
diff --git a/drivers/pps/Makefile b/drivers/pps/Makefile
new file mode 100644
index 00000000000..19ea582f431
--- /dev/null
+++ b/drivers/pps/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the PPS core.
+#
+
+pps_core-y			:= pps.o kapi.o sysfs.o
+obj-$(CONFIG_PPS)		:= pps_core.o
+
+ccflags-$(CONFIG_PPS_DEBUG) := -DDEBUG
diff --git a/drivers/pps/kapi.c b/drivers/pps/kapi.c
new file mode 100644
index 00000000000..35a0b192d76
--- /dev/null
+++ b/drivers/pps/kapi.c
@@ -0,0 +1,329 @@
+/*
+ * kernel API
+ *
+ *
+ * Copyright (C) 2005-2009   Rodolfo Giometti <giometti@linux.it>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/spinlock.h>
+#include <linux/idr.h>
+#include <linux/fs.h>
+#include <linux/pps_kernel.h>
+
+/*
+ * Global variables
+ */
+
+DEFINE_SPINLOCK(pps_idr_lock);
+DEFINE_IDR(pps_idr);
+
+/*
+ * Local functions
+ */
+
+static void pps_add_offset(struct pps_ktime *ts, struct pps_ktime *offset)
+{
+	ts->nsec += offset->nsec;
+	while (ts->nsec >= NSEC_PER_SEC) {
+		ts->nsec -= NSEC_PER_SEC;
+		ts->sec++;
+	}
+	while (ts->nsec < 0) {
+		ts->nsec += NSEC_PER_SEC;
+		ts->sec--;
+	}
+	ts->sec += offset->sec;
+}
+
+/*
+ * Exported functions
+ */
+
+/* pps_get_source - find a PPS source
+ * @source: the PPS source ID.
+ *
+ * This function is used to find an already registered PPS source into the
+ * system.
+ *
+ * The function returns NULL if found nothing, otherwise it returns a pointer
+ * to the PPS source data struct (the refcounter is incremented by 1).
+ */
+
+struct pps_device *pps_get_source(int source)
+{
+	struct pps_device *pps;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pps_idr_lock, flags);
+
+	pps = idr_find(&pps_idr, source);
+	if (pps != NULL)
+		atomic_inc(&pps->usage);
+
+	spin_unlock_irqrestore(&pps_idr_lock, flags);
+
+	return pps;
+}
+
+/* pps_put_source - free the PPS source data
+ * @pps: a pointer to the PPS source.
+ *
+ * This function is used to free a PPS data struct if its refcount is 0.
+ */
+
+void pps_put_source(struct pps_device *pps)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&pps_idr_lock, flags);
+	BUG_ON(atomic_read(&pps->usage) == 0);
+
+	if (!atomic_dec_and_test(&pps->usage)) {
+		pps = NULL;
+		goto exit;
+	}
+
+	/* No more reference to the PPS source. We can safely remove the
+	 * PPS data struct.
+	 */
+	idr_remove(&pps_idr, pps->id);
+
+exit:
+	spin_unlock_irqrestore(&pps_idr_lock, flags);
+	kfree(pps);
+}
+
+/* pps_register_source - add a PPS source in the system
+ * @info: the PPS info struct
+ * @default_params: the default PPS parameters of the new source
+ *
+ * This function is used to add a new PPS source in the system. The new
+ * source is described by info's fields and it will have, as default PPS
+ * parameters, the ones specified into default_params.
+ *
+ * The function returns, in case of success, the PPS source ID.
+ */
+
+int pps_register_source(struct pps_source_info *info, int default_params)
+{
+	struct pps_device *pps;
+	int id;
+	int err;
+
+	/* Sanity checks */
+	if ((info->mode & default_params) != default_params) {
+		printk(KERN_ERR "pps: %s: unsupported default parameters\n",
+					info->name);
+		err = -EINVAL;
+		goto pps_register_source_exit;
+	}
+	if ((info->mode & (PPS_ECHOASSERT | PPS_ECHOCLEAR)) != 0 &&
+			info->echo == NULL) {
+		printk(KERN_ERR "pps: %s: echo function is not defined\n",
+					info->name);
+		err = -EINVAL;
+		goto pps_register_source_exit;
+	}
+	if ((info->mode & (PPS_TSFMT_TSPEC | PPS_TSFMT_NTPFP)) == 0) {
+		printk(KERN_ERR "pps: %s: unspecified time format\n",
+					info->name);
+		err = -EINVAL;
+		goto pps_register_source_exit;
+	}
+
+	/* Allocate memory for the new PPS source struct */
+	pps = kzalloc(sizeof(struct pps_device), GFP_KERNEL);
+	if (pps == NULL) {
+		err = -ENOMEM;
+		goto pps_register_source_exit;
+	}
+
+	/* These initializations must be done before calling idr_get_new()
+	 * in order to avoid reces into pps_event().
+	 */
+	pps->params.api_version = PPS_API_VERS;
+	pps->params.mode = default_params;
+	pps->info = *info;
+
+	init_waitqueue_head(&pps->queue);
+	spin_lock_init(&pps->lock);
+	atomic_set(&pps->usage, 1);
+
+	/* Get new ID for the new PPS source */
+	if (idr_pre_get(&pps_idr, GFP_KERNEL) == 0) {
+		err = -ENOMEM;
+		goto kfree_pps;
+	}
+
+	spin_lock_irq(&pps_idr_lock);
+
+	/* Now really allocate the PPS source.
+	 * After idr_get_new() calling the new source will be freely available
+	 * into the kernel.
+	 */
+	err = idr_get_new(&pps_idr, pps, &id);
+	if (err < 0) {
+		spin_unlock_irq(&pps_idr_lock);
+		goto kfree_pps;
+	}
+
+	id = id & MAX_ID_MASK;
+	if (id >= PPS_MAX_SOURCES) {
+		spin_unlock_irq(&pps_idr_lock);
+
+		printk(KERN_ERR "pps: %s: too many PPS sources in the system\n",
+					info->name);
+		err = -EBUSY;
+		goto free_idr;
+	}
+	pps->id = id;
+
+	spin_unlock_irq(&pps_idr_lock);
+
+	/* Create the char device */
+	err = pps_register_cdev(pps);
+	if (err < 0) {
+		printk(KERN_ERR "pps: %s: unable to create char device\n",
+					info->name);
+		goto free_idr;
+	}
+
+	pr_info("new PPS source %s at ID %d\n", info->name, id);
+
+	return id;
+
+free_idr:
+	spin_lock_irq(&pps_idr_lock);
+	idr_remove(&pps_idr, id);
+	spin_unlock_irq(&pps_idr_lock);
+
+kfree_pps:
+	kfree(pps);
+
+pps_register_source_exit:
+	printk(KERN_ERR "pps: %s: unable to register source\n", info->name);
+
+	return err;
+}
+EXPORT_SYMBOL(pps_register_source);
+
+/* pps_unregister_source - remove a PPS source from the system
+ * @source: the PPS source ID
+ *
+ * This function is used to remove a previously registered PPS source from
+ * the system.
+ */
+
+void pps_unregister_source(int source)
+{
+	struct pps_device *pps;
+
+	spin_lock_irq(&pps_idr_lock);
+	pps = idr_find(&pps_idr, source);
+
+	if (!pps) {
+		BUG();
+		spin_unlock_irq(&pps_idr_lock);
+		return;
+	}
+	spin_unlock_irq(&pps_idr_lock);
+
+	pps_unregister_cdev(pps);
+	pps_put_source(pps);
+}
+EXPORT_SYMBOL(pps_unregister_source);
+
+/* pps_event - register a PPS event into the system
+ * @source: the PPS source ID
+ * @ts: the event timestamp
+ * @event: the event type
+ * @data: userdef pointer
+ *
+ * This function is used by each PPS client in order to register a new
+ * PPS event into the system (it's usually called inside an IRQ handler).
+ *
+ * If an echo function is associated with the PPS source it will be called
+ * as:
+ *	pps->info.echo(source, event, data);
+ */
+
+void pps_event(int source, struct pps_ktime *ts, int event, void *data)
+{
+	struct pps_device *pps;
+	unsigned long flags;
+
+	if ((event & (PPS_CAPTUREASSERT | PPS_CAPTURECLEAR)) == 0) {
+		printk(KERN_ERR "pps: unknown event (%x) for source %d\n",
+			event, source);
+		return;
+	}
+
+	pps = pps_get_source(source);
+	if (!pps)
+		return;
+
+	pr_debug("PPS event on source %d at %llu.%06u\n",
+			pps->id, (unsigned long long) ts->sec, ts->nsec);
+
+	spin_lock_irqsave(&pps->lock, flags);
+
+	/* Must call the echo function? */
+	if ((pps->params.mode & (PPS_ECHOASSERT | PPS_ECHOCLEAR)))
+		pps->info.echo(source, event, data);
+
+	/* Check the event */
+	pps->current_mode = pps->params.mode;
+	if (event & PPS_CAPTUREASSERT) {
+		/* We have to add an offset? */
+		if (pps->params.mode & PPS_OFFSETASSERT)
+			pps_add_offset(ts, &pps->params.assert_off_tu);
+
+		/* Save the time stamp */
+		pps->assert_tu = *ts;
+		pps->assert_sequence++;
+		pr_debug("capture assert seq #%u for source %d\n",
+			pps->assert_sequence, source);
+	}
+	if (event & PPS_CAPTURECLEAR) {
+		/* We have to add an offset? */
+		if (pps->params.mode & PPS_OFFSETCLEAR)
+			pps_add_offset(ts, &pps->params.clear_off_tu);
+
+		/* Save the time stamp */
+		pps->clear_tu = *ts;
+		pps->clear_sequence++;
+		pr_debug("capture clear seq #%u for source %d\n",
+			pps->clear_sequence, source);
+	}
+
+	pps->go = ~0;
+	wake_up_interruptible(&pps->queue);
+
+	kill_fasync(&pps->async_queue, SIGIO, POLL_IN);
+
+	spin_unlock_irqrestore(&pps->lock, flags);
+
+	/* Now we can release the PPS source for (possible) deregistration */
+	pps_put_source(pps);
+}
+EXPORT_SYMBOL(pps_event);
diff --git a/drivers/pps/pps.c b/drivers/pps/pps.c
new file mode 100644
index 00000000000..ac8cc8cea1e
--- /dev/null
+++ b/drivers/pps/pps.c
@@ -0,0 +1,312 @@
+/*
+ * PPS core file
+ *
+ *
+ * Copyright (C) 2005-2009   Rodolfo Giometti <giometti@linux.it>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/uaccess.h>
+#include <linux/idr.h>
+#include <linux/cdev.h>
+#include <linux/poll.h>
+#include <linux/pps_kernel.h>
+
+/*
+ * Local variables
+ */
+
+static dev_t pps_devt;
+static struct class *pps_class;
+
+/*
+ * Char device methods
+ */
+
+static unsigned int pps_cdev_poll(struct file *file, poll_table *wait)
+{
+	struct pps_device *pps = file->private_data;
+
+	poll_wait(file, &pps->queue, wait);
+
+	return POLLIN | POLLRDNORM;
+}
+
+static int pps_cdev_fasync(int fd, struct file *file, int on)
+{
+	struct pps_device *pps = file->private_data;
+	return fasync_helper(fd, file, on, &pps->async_queue);
+}
+
+static long pps_cdev_ioctl(struct file *file,
+		unsigned int cmd, unsigned long arg)
+{
+	struct pps_device *pps = file->private_data;
+	struct pps_kparams params;
+	struct pps_fdata fdata;
+	unsigned long ticks;
+	void __user *uarg = (void __user *) arg;
+	int __user *iuarg = (int __user *) arg;
+	int err;
+
+	switch (cmd) {
+	case PPS_GETPARAMS:
+		pr_debug("PPS_GETPARAMS: source %d\n", pps->id);
+
+		/* Return current parameters */
+		err = copy_to_user(uarg, &pps->params,
+						sizeof(struct pps_kparams));
+		if (err)
+			return -EFAULT;
+
+		break;
+
+	case PPS_SETPARAMS:
+		pr_debug("PPS_SETPARAMS: source %d\n", pps->id);
+
+		/* Check the capabilities */
+		if (!capable(CAP_SYS_TIME))
+			return -EPERM;
+
+		err = copy_from_user(&params, uarg, sizeof(struct pps_kparams));
+		if (err)
+			return -EFAULT;
+		if (!(params.mode & (PPS_CAPTUREASSERT | PPS_CAPTURECLEAR))) {
+			pr_debug("capture mode unspecified (%x)\n",
+								params.mode);
+			return -EINVAL;
+		}
+
+		/* Check for supported capabilities */
+		if ((params.mode & ~pps->info.mode) != 0) {
+			pr_debug("unsupported capabilities (%x)\n",
+								params.mode);
+			return -EINVAL;
+		}
+
+		spin_lock_irq(&pps->lock);
+
+		/* Save the new parameters */
+		pps->params = params;
+
+		/* Restore the read only parameters */
+		if ((params.mode & (PPS_TSFMT_TSPEC | PPS_TSFMT_NTPFP)) == 0) {
+			/* section 3.3 of RFC 2783 interpreted */
+			pr_debug("time format unspecified (%x)\n",
+								params.mode);
+			pps->params.mode |= PPS_TSFMT_TSPEC;
+		}
+		if (pps->info.mode & PPS_CANWAIT)
+			pps->params.mode |= PPS_CANWAIT;
+		pps->params.api_version = PPS_API_VERS;
+
+		spin_unlock_irq(&pps->lock);
+
+		break;
+
+	case PPS_GETCAP:
+		pr_debug("PPS_GETCAP: source %d\n", pps->id);
+
+		err = put_user(pps->info.mode, iuarg);
+		if (err)
+			return -EFAULT;
+
+		break;
+
+	case PPS_FETCH:
+		pr_debug("PPS_FETCH: source %d\n", pps->id);
+
+		err = copy_from_user(&fdata, uarg, sizeof(struct pps_fdata));
+		if (err)
+			return -EFAULT;
+
+		pps->go = 0;
+
+		/* Manage the timeout */
+		if (fdata.timeout.flags & PPS_TIME_INVALID)
+			err = wait_event_interruptible(pps->queue, pps->go);
+		else {
+			pr_debug("timeout %lld.%09d\n",
+					(long long) fdata.timeout.sec,
+					fdata.timeout.nsec);
+			ticks = fdata.timeout.sec * HZ;
+			ticks += fdata.timeout.nsec / (NSEC_PER_SEC / HZ);
+
+			if (ticks != 0) {
+				err = wait_event_interruptible_timeout(
+						pps->queue, pps->go, ticks);
+				if (err == 0)
+					return -ETIMEDOUT;
+			}
+		}
+
+		/* Check for pending signals */
+		if (err == -ERESTARTSYS) {
+			pr_debug("pending signal caught\n");
+			return -EINTR;
+		}
+
+		/* Return the fetched timestamp */
+		spin_lock_irq(&pps->lock);
+
+		fdata.info.assert_sequence = pps->assert_sequence;
+		fdata.info.clear_sequence = pps->clear_sequence;
+		fdata.info.assert_tu = pps->assert_tu;
+		fdata.info.clear_tu = pps->clear_tu;
+		fdata.info.current_mode = pps->current_mode;
+
+		spin_unlock_irq(&pps->lock);
+
+		err = copy_to_user(uarg, &fdata, sizeof(struct pps_fdata));
+		if (err)
+			return -EFAULT;
+
+		break;
+
+	default:
+		return -ENOTTY;
+		break;
+	}
+
+	return 0;
+}
+
+static int pps_cdev_open(struct inode *inode, struct file *file)
+{
+	struct pps_device *pps = container_of(inode->i_cdev,
+						struct pps_device, cdev);
+	int found;
+
+	found = pps_get_source(pps->id) != 0;
+	if (!found)
+		return -ENODEV;
+
+	file->private_data = pps;
+
+	return 0;
+}
+
+static int pps_cdev_release(struct inode *inode, struct file *file)
+{
+	struct pps_device *pps = file->private_data;
+
+	/* Free the PPS source and wake up (possible) deregistration */
+	pps_put_source(pps);
+
+	return 0;
+}
+
+/*
+ * Char device stuff
+ */
+
+static const struct file_operations pps_cdev_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.poll		= pps_cdev_poll,
+	.fasync		= pps_cdev_fasync,
+	.unlocked_ioctl	= pps_cdev_ioctl,
+	.open		= pps_cdev_open,
+	.release	= pps_cdev_release,
+};
+
+int pps_register_cdev(struct pps_device *pps)
+{
+	int err;
+
+	pps->devno = MKDEV(MAJOR(pps_devt), pps->id);
+	cdev_init(&pps->cdev, &pps_cdev_fops);
+	pps->cdev.owner = pps->info.owner;
+
+	err = cdev_add(&pps->cdev, pps->devno, 1);
+	if (err) {
+		printk(KERN_ERR "pps: %s: failed to add char device %d:%d\n",
+				pps->info.name, MAJOR(pps_devt), pps->id);
+		return err;
+	}
+	pps->dev = device_create(pps_class, pps->info.dev, pps->devno, NULL,
+							"pps%d", pps->id);
+	if (err)
+		goto del_cdev;
+	dev_set_drvdata(pps->dev, pps);
+
+	pr_debug("source %s got cdev (%d:%d)\n", pps->info.name,
+			MAJOR(pps_devt), pps->id);
+
+	return 0;
+
+del_cdev:
+	cdev_del(&pps->cdev);
+
+	return err;
+}
+
+void pps_unregister_cdev(struct pps_device *pps)
+{
+	device_destroy(pps_class, pps->devno);
+	cdev_del(&pps->cdev);
+}
+
+/*
+ * Module stuff
+ */
+
+static void __exit pps_exit(void)
+{
+	class_destroy(pps_class);
+	unregister_chrdev_region(pps_devt, PPS_MAX_SOURCES);
+}
+
+static int __init pps_init(void)
+{
+	int err;
+
+	pps_class = class_create(THIS_MODULE, "pps");
+	if (!pps_class) {
+		printk(KERN_ERR "pps: failed to allocate class\n");
+		return -ENOMEM;
+	}
+	pps_class->dev_attrs = pps_attrs;
+
+	err = alloc_chrdev_region(&pps_devt, 0, PPS_MAX_SOURCES, "pps");
+	if (err < 0) {
+		printk(KERN_ERR "pps: failed to allocate char device region\n");
+		goto remove_class;
+	}
+
+	pr_info("LinuxPPS API ver. %d registered\n", PPS_API_VERS);
+	pr_info("Software ver. %s - Copyright 2005-2007 Rodolfo Giometti "
+		"<giometti@linux.it>\n", PPS_VERSION);
+
+	return 0;
+
+remove_class:
+	class_destroy(pps_class);
+
+	return err;
+}
+
+subsys_initcall(pps_init);
+module_exit(pps_exit);
+
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("LinuxPPS support (RFC 2783) - ver. " PPS_VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/pps/sysfs.c b/drivers/pps/sysfs.c
new file mode 100644
index 00000000000..ef0978c71ee
--- /dev/null
+++ b/drivers/pps/sysfs.c
@@ -0,0 +1,98 @@
+/*
+ * PPS sysfs support
+ *
+ *
+ * Copyright (C) 2007-2009   Rodolfo Giometti <giometti@linux.it>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/pps_kernel.h>
+
+/*
+ * Attribute functions
+ */
+
+static ssize_t pps_show_assert(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct pps_device *pps = dev_get_drvdata(dev);
+
+	if (!(pps->info.mode & PPS_CAPTUREASSERT))
+		return 0;
+
+	return sprintf(buf, "%lld.%09d#%d\n",
+			(long long) pps->assert_tu.sec, pps->assert_tu.nsec,
+			pps->assert_sequence);
+}
+
+static ssize_t pps_show_clear(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct pps_device *pps = dev_get_drvdata(dev);
+
+	if (!(pps->info.mode & PPS_CAPTURECLEAR))
+		return 0;
+
+	return sprintf(buf, "%lld.%09d#%d\n",
+			(long long) pps->clear_tu.sec, pps->clear_tu.nsec,
+			pps->clear_sequence);
+}
+
+static ssize_t pps_show_mode(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct pps_device *pps = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%4x\n", pps->info.mode);
+}
+
+static ssize_t pps_show_echo(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct pps_device *pps = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", !!pps->info.echo);
+}
+
+static ssize_t pps_show_name(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct pps_device *pps = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s\n", pps->info.name);
+}
+
+static ssize_t pps_show_path(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct pps_device *pps = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s\n", pps->info.path);
+}
+
+struct device_attribute pps_attrs[] = {
+	__ATTR(assert, S_IRUGO, pps_show_assert, NULL),
+	__ATTR(clear, S_IRUGO, pps_show_clear, NULL),
+	__ATTR(mode, S_IRUGO, pps_show_mode, NULL),
+	__ATTR(echo, S_IRUGO, pps_show_echo, NULL),
+	__ATTR(name, S_IRUGO, pps_show_name, NULL),
+	__ATTR(path, S_IRUGO, pps_show_path, NULL),
+	__ATTR_NULL,
+};
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index 3b78540288c..45415096c29 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -263,15 +263,21 @@ static void rio_route_set_ops(struct rio_dev *rdev)
  * device to the RIO device list.  Creates the generic sysfs nodes
  * for an RIO device.
  */
-static void __devinit rio_add_device(struct rio_dev *rdev)
+static int __devinit rio_add_device(struct rio_dev *rdev)
 {
-	device_add(&rdev->dev);
+	int err;
+
+	err = device_add(&rdev->dev);
+	if (err)
+		return err;
 
 	spin_lock(&rio_global_list_lock);
 	list_add_tail(&rdev->global_list, &rio_devices);
 	spin_unlock(&rio_global_list_lock);
 
 	rio_create_sysfs_dev_files(rdev);
+
+	return 0;
 }
 
 /**
@@ -294,13 +300,14 @@ static struct rio_dev __devinit *rio_setup_device(struct rio_net *net,
 					struct rio_mport *port, u16 destid,
 					u8 hopcount, int do_enum)
 {
+	int ret = 0;
 	struct rio_dev *rdev;
-	struct rio_switch *rswitch;
+	struct rio_switch *rswitch = NULL;
 	int result, rdid;
 
 	rdev = kzalloc(sizeof(struct rio_dev), GFP_KERNEL);
 	if (!rdev)
-		goto out;
+		return NULL;
 
 	rdev->net = net;
 	rio_mport_read_config_32(port, destid, hopcount, RIO_DEV_ID_CAR,
@@ -343,23 +350,16 @@ static struct rio_dev __devinit *rio_setup_device(struct rio_net *net,
 		rio_mport_read_config_32(port, destid, hopcount,
 					 RIO_SWP_INFO_CAR, &rdev->swpinfo);
 		rswitch = kmalloc(sizeof(struct rio_switch), GFP_KERNEL);
-		if (!rswitch) {
-			kfree(rdev);
-			rdev = NULL;
-			goto out;
-		}
+		if (!rswitch)
+			goto cleanup;
 		rswitch->switchid = next_switchid;
 		rswitch->hopcount = hopcount;
 		rswitch->destid = destid;
 		rswitch->route_table = kzalloc(sizeof(u8)*
 					RIO_MAX_ROUTE_ENTRIES(port->sys_size),
 					GFP_KERNEL);
-		if (!rswitch->route_table) {
-			kfree(rdev);
-			rdev = NULL;
-			kfree(rswitch);
-			goto out;
-		}
+		if (!rswitch->route_table)
+			goto cleanup;
 		/* Initialize switch route table */
 		for (rdid = 0; rdid < RIO_MAX_ROUTE_ENTRIES(port->sys_size);
 				rdid++)
@@ -390,10 +390,19 @@ static struct rio_dev __devinit *rio_setup_device(struct rio_net *net,
 		rio_init_dbell_res(&rdev->riores[RIO_DOORBELL_RESOURCE],
 				   0, 0xffff);
 
-	rio_add_device(rdev);
+	ret = rio_add_device(rdev);
+	if (ret)
+		goto cleanup;
 
-      out:
 	return rdev;
+
+cleanup:
+	if (rswitch) {
+		kfree(rswitch->route_table);
+		kfree(rswitch);
+	}
+	kfree(rdev);
+	return NULL;
 }
 
 /**
diff --git a/drivers/rapidio/rio-sysfs.c b/drivers/rapidio/rio-sysfs.c
index 97a147f050d..ba742e82c57 100644
--- a/drivers/rapidio/rio-sysfs.c
+++ b/drivers/rapidio/rio-sysfs.c
@@ -214,9 +214,11 @@ static struct bin_attribute rio_config_attr = {
  */
 int rio_create_sysfs_dev_files(struct rio_dev *rdev)
 {
-	sysfs_create_bin_file(&rdev->dev.kobj, &rio_config_attr);
+	int err = 0;
 
-	return 0;
+	err = sysfs_create_bin_file(&rdev->dev.kobj, &rio_config_attr);
+
+	return err;
 }
 
 /**
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 277d35d232f..81adbdbd504 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -296,6 +296,15 @@ config RTC_DRV_RX8581
 	  This driver can also be built as a module. If so the module
 	  will be called rtc-rx8581.
 
+config RTC_DRV_RX8025
+	tristate "Epson RX-8025SA/NB"
+	help
+	  If you say yes here you get support for the Epson
+	  RX-8025SA/NB RTC chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-rx8025.
+
 endif # I2C
 
 comment "SPI RTC drivers"
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 6c0639a14f0..3c0f2b2ac92 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -62,6 +62,7 @@ obj-$(CONFIG_RTC_DRV_R9701)	+= rtc-r9701.o
 obj-$(CONFIG_RTC_DRV_RS5C313)	+= rtc-rs5c313.o
 obj-$(CONFIG_RTC_DRV_RS5C348)	+= rtc-rs5c348.o
 obj-$(CONFIG_RTC_DRV_RS5C372)	+= rtc-rs5c372.o
+obj-$(CONFIG_RTC_DRV_RX8025)	+= rtc-rx8025.o
 obj-$(CONFIG_RTC_DRV_RX8581)	+= rtc-rx8581.o
 obj-$(CONFIG_RTC_DRV_S35390A)	+= rtc-s35390a.o
 obj-$(CONFIG_RTC_DRV_S3C)	+= rtc-s3c.o
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index 4348c4b0d45..4cdb31a362c 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -371,19 +371,21 @@ EXPORT_SYMBOL_GPL(rtc_update_irq_enable);
  * @rtc: the rtc device
  * @num: how many irqs are being reported (usually one)
  * @events: mask of RTC_IRQF with one or more of RTC_PF, RTC_AF, RTC_UF
- * Context: in_interrupt(), irqs blocked
+ * Context: any
  */
 void rtc_update_irq(struct rtc_device *rtc,
 		unsigned long num, unsigned long events)
 {
-	spin_lock(&rtc->irq_lock);
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtc->irq_lock, flags);
 	rtc->irq_data = (rtc->irq_data + (num << 8)) | events;
-	spin_unlock(&rtc->irq_lock);
+	spin_unlock_irqrestore(&rtc->irq_lock, flags);
 
-	spin_lock(&rtc->irq_task_lock);
+	spin_lock_irqsave(&rtc->irq_task_lock, flags);
 	if (rtc->irq_task)
 		rtc->irq_task->func(rtc->irq_task->private_data);
-	spin_unlock(&rtc->irq_task_lock);
+	spin_unlock_irqrestore(&rtc->irq_task_lock, flags);
 
 	wake_up_interruptible(&rtc->irq_queue);
 	kill_fasync(&rtc->async_queue, SIGIO, POLL_IN);
diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c
index 45152f4952d..8a11de9552c 100644
--- a/drivers/rtc/rtc-dev.c
+++ b/drivers/rtc/rtc-dev.c
@@ -60,8 +60,7 @@ static void rtc_uie_task(struct work_struct *work)
 
 	err = rtc_read_time(rtc, &tm);
 
-	local_irq_disable();
-	spin_lock(&rtc->irq_lock);
+	spin_lock_irq(&rtc->irq_lock);
 	if (rtc->stop_uie_polling || err) {
 		rtc->uie_task_active = 0;
 	} else if (rtc->oldsecs != tm.tm_sec) {
@@ -74,10 +73,9 @@ static void rtc_uie_task(struct work_struct *work)
 	} else if (schedule_work(&rtc->uie_task) == 0) {
 		rtc->uie_task_active = 0;
 	}
-	spin_unlock(&rtc->irq_lock);
+	spin_unlock_irq(&rtc->irq_lock);
 	if (num)
 		rtc_update_irq(rtc, num, RTC_UF | RTC_IRQF);
-	local_irq_enable();
 }
 static void rtc_uie_timer(unsigned long data)
 {
diff --git a/drivers/rtc/rtc-ds1305.c b/drivers/rtc/rtc-ds1305.c
index fc372df6534..8f410e59d9f 100644
--- a/drivers/rtc/rtc-ds1305.c
+++ b/drivers/rtc/rtc-ds1305.c
@@ -499,10 +499,7 @@ static void ds1305_work(struct work_struct *work)
 	if (!test_bit(FLAG_EXITING, &ds1305->flags))
 		enable_irq(spi->irq);
 
-	/* rtc_update_irq() requires an IRQ-disabled context */
-	local_irq_disable();
 	rtc_update_irq(ds1305->rtc, 1, RTC_AF | RTC_IRQF);
-	local_irq_enable();
 }
 
 /*
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index 2c4a65302a9..47a93c022d9 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -31,6 +31,8 @@ enum ds_type {
 	ds_1338,
 	ds_1339,
 	ds_1340,
+	ds_1388,
+	ds_3231,
 	m41t00,
 	rx_8025,
 	// rs5c372 too?  different address...
@@ -66,6 +68,7 @@ enum ds_type {
 #define DS1337_REG_CONTROL	0x0e
 #	define DS1337_BIT_nEOSC		0x80
 #	define DS1339_BIT_BBSQI		0x20
+#	define DS3231_BIT_BBSQW		0x40 /* same as BBSQI */
 #	define DS1337_BIT_RS2		0x10
 #	define DS1337_BIT_RS1		0x08
 #	define DS1337_BIT_INTCN		0x04
@@ -94,6 +97,7 @@ enum ds_type {
 
 
 struct ds1307 {
+	u8			offset; /* register's offset */
 	u8			regs[11];
 	enum ds_type		type;
 	unsigned long		flags;
@@ -128,6 +132,9 @@ static const struct chip_desc chips[] = {
 },
 [ds_1340] = {
 },
+[ds_3231] = {
+	.alarm		= 1,
+},
 [m41t00] = {
 },
 [rx_8025] = {
@@ -138,7 +145,9 @@ static const struct i2c_device_id ds1307_id[] = {
 	{ "ds1337", ds_1337 },
 	{ "ds1338", ds_1338 },
 	{ "ds1339", ds_1339 },
+	{ "ds1388", ds_1388 },
 	{ "ds1340", ds_1340 },
+	{ "ds3231", ds_3231 },
 	{ "m41t00", m41t00 },
 	{ "rx8025", rx_8025 },
 	{ }
@@ -258,12 +267,7 @@ static void ds1307_work(struct work_struct *work)
 		control &= ~DS1337_BIT_A1IE;
 		i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, control);
 
-		/* rtc_update_irq() assumes that it is called
-		 * from IRQ-disabled context.
-		 */
-		local_irq_disable();
 		rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
-		local_irq_enable();
 	}
 
 out:
@@ -291,7 +295,7 @@ static int ds1307_get_time(struct device *dev, struct rtc_time *t)
 
 	/* read the RTC date and time registers all at once */
 	tmp = ds1307->read_block_data(ds1307->client,
-		DS1307_REG_SECS, 7, ds1307->regs);
+		ds1307->offset, 7, ds1307->regs);
 	if (tmp != 7) {
 		dev_err(dev, "%s error %d\n", "read", tmp);
 		return -EIO;
@@ -353,6 +357,7 @@ static int ds1307_set_time(struct device *dev, struct rtc_time *t)
 	switch (ds1307->type) {
 	case ds_1337:
 	case ds_1339:
+	case ds_3231:
 		buf[DS1307_REG_MONTH] |= DS1337_BIT_CENTURY;
 		break;
 	case ds_1340:
@@ -367,7 +372,8 @@ static int ds1307_set_time(struct device *dev, struct rtc_time *t)
 		"write", buf[0], buf[1], buf[2], buf[3],
 		buf[4], buf[5], buf[6]);
 
-	result = ds1307->write_block_data(ds1307->client, 0, 7, buf);
+	result = ds1307->write_block_data(ds1307->client,
+		ds1307->offset, 7, buf);
 	if (result < 0) {
 		dev_err(dev, "%s error %d\n", "write", result);
 		return result;
@@ -624,6 +630,11 @@ static int __devinit ds1307_probe(struct i2c_client *client,
 	struct i2c_adapter	*adapter = to_i2c_adapter(client->dev.parent);
 	int			want_irq = false;
 	unsigned char		*buf;
+	static const int	bbsqi_bitpos[] = {
+		[ds_1337] = 0,
+		[ds_1339] = DS1339_BIT_BBSQI,
+		[ds_3231] = DS3231_BIT_BBSQW,
+	};
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)
 	    && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
@@ -632,9 +643,12 @@ static int __devinit ds1307_probe(struct i2c_client *client,
 	if (!(ds1307 = kzalloc(sizeof(struct ds1307), GFP_KERNEL)))
 		return -ENOMEM;
 
-	ds1307->client = client;
 	i2c_set_clientdata(client, ds1307);
-	ds1307->type = id->driver_data;
+
+	ds1307->client	= client;
+	ds1307->type	= id->driver_data;
+	ds1307->offset	= 0;
+
 	buf = ds1307->regs;
 	if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) {
 		ds1307->read_block_data = i2c_smbus_read_i2c_block_data;
@@ -647,6 +661,7 @@ static int __devinit ds1307_probe(struct i2c_client *client,
 	switch (ds1307->type) {
 	case ds_1337:
 	case ds_1339:
+	case ds_3231:
 		/* has IRQ? */
 		if (ds1307->client->irq > 0 && chip->alarm) {
 			INIT_WORK(&ds1307->work, ds1307_work);
@@ -666,12 +681,12 @@ static int __devinit ds1307_probe(struct i2c_client *client,
 			ds1307->regs[0] &= ~DS1337_BIT_nEOSC;
 
 		/* Using IRQ?  Disable the square wave and both alarms.
-		 * For ds1339, be sure alarms can trigger when we're
-		 * running on Vbackup (BBSQI); we assume ds1337 will
-		 * ignore that bit
+		 * For some variants, be sure alarms can trigger when we're
+		 * running on Vbackup (BBSQI/BBSQW)
 		 */
 		if (want_irq) {
-			ds1307->regs[0] |= DS1337_BIT_INTCN | DS1339_BIT_BBSQI;
+			ds1307->regs[0] |= DS1337_BIT_INTCN
+					| bbsqi_bitpos[ds1307->type];
 			ds1307->regs[0] &= ~(DS1337_BIT_A2IE | DS1337_BIT_A1IE);
 		}
 
@@ -751,6 +766,9 @@ static int __devinit ds1307_probe(struct i2c_client *client,
 						  hour);
 		}
 		break;
+	case ds_1388:
+		ds1307->offset = 1; /* Seconds starts at 1 */
+		break;
 	default:
 		break;
 	}
@@ -814,6 +832,8 @@ read_rtc:
 	case rx_8025:
 	case ds_1337:
 	case ds_1339:
+	case ds_1388:
+	case ds_3231:
 		break;
 	}
 
diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c
index 4d32e328f6c..32b27739ec2 100644
--- a/drivers/rtc/rtc-ds1374.c
+++ b/drivers/rtc/rtc-ds1374.c
@@ -296,12 +296,7 @@ static void ds1374_work(struct work_struct *work)
 		control &= ~(DS1374_REG_CR_WACE | DS1374_REG_CR_AIE);
 		i2c_smbus_write_byte_data(client, DS1374_REG_CR, control);
 
-		/* rtc_update_irq() assumes that it is called
-		 * from IRQ-disabled context.
-		 */
-		local_irq_disable();
 		rtc_update_irq(ds1374->rtc, 1, RTC_AF | RTC_IRQF);
-		local_irq_enable();
 	}
 
 out:
diff --git a/drivers/rtc/rtc-ds1553.c b/drivers/rtc/rtc-ds1553.c
index 38d472b6340..717288527c6 100644
--- a/drivers/rtc/rtc-ds1553.c
+++ b/drivers/rtc/rtc-ds1553.c
@@ -329,8 +329,7 @@ static int __devinit ds1553_rtc_probe(struct platform_device *pdev)
 	if (pdata->irq > 0) {
 		writeb(0, ioaddr + RTC_INTERRUPTS);
 		if (request_irq(pdata->irq, ds1553_rtc_interrupt,
-				IRQF_DISABLED | IRQF_SHARED,
-				pdev->name, pdev) < 0) {
+				IRQF_DISABLED, pdev->name, pdev) < 0) {
 			dev_warn(&pdev->dev, "interrupt not available.\n");
 			pdata->irq = 0;
 		}
diff --git a/drivers/rtc/rtc-ds1742.c b/drivers/rtc/rtc-ds1742.c
index 8bc8501bffc..09249459e9a 100644
--- a/drivers/rtc/rtc-ds1742.c
+++ b/drivers/rtc/rtc-ds1742.c
@@ -57,6 +57,7 @@ struct rtc_plat_data {
 	size_t size;
 	resource_size_t baseaddr;
 	unsigned long last_jiffies;
+	struct bin_attribute nvram_attr;
 };
 
 static int ds1742_rtc_set_time(struct device *dev, struct rtc_time *tm)
@@ -157,18 +158,6 @@ static ssize_t ds1742_nvram_write(struct kobject *kobj,
 	return count;
 }
 
-static struct bin_attribute ds1742_nvram_attr = {
-	.attr = {
-		.name = "nvram",
-		.mode = S_IRUGO | S_IWUSR,
-	},
-	.read = ds1742_nvram_read,
-	.write = ds1742_nvram_write,
-	/* REVISIT: size in sysfs won't match actual size... if it's
-	 * not a constant, each RTC should have its own attribute.
-	 */
-};
-
 static int __devinit ds1742_rtc_probe(struct platform_device *pdev)
 {
 	struct rtc_device *rtc;
@@ -199,6 +188,12 @@ static int __devinit ds1742_rtc_probe(struct platform_device *pdev)
 	pdata->size_nvram = pdata->size - RTC_SIZE;
 	pdata->ioaddr_rtc = ioaddr + pdata->size_nvram;
 
+	pdata->nvram_attr.attr.name = "nvram";
+	pdata->nvram_attr.attr.mode = S_IRUGO | S_IWUSR;
+	pdata->nvram_attr.read = ds1742_nvram_read;
+	pdata->nvram_attr.write = ds1742_nvram_write;
+	pdata->nvram_attr.size = pdata->size_nvram;
+
 	/* turn RTC on if it was not on */
 	ioaddr = pdata->ioaddr_rtc;
 	sec = readb(ioaddr + RTC_SECONDS);
@@ -221,11 +216,13 @@ static int __devinit ds1742_rtc_probe(struct platform_device *pdev)
 	pdata->rtc = rtc;
 	pdata->last_jiffies = jiffies;
 	platform_set_drvdata(pdev, pdata);
-	ds1742_nvram_attr.size = max(ds1742_nvram_attr.size,
-				     pdata->size_nvram);
-	ret = sysfs_create_bin_file(&pdev->dev.kobj, &ds1742_nvram_attr);
-	if (ret)
+
+	ret = sysfs_create_bin_file(&pdev->dev.kobj, &pdata->nvram_attr);
+	if (ret) {
+		dev_err(&pdev->dev, "creating nvram file in sysfs failed\n");
 		goto out;
+	}
+
 	return 0;
  out:
 	if (pdata->rtc)
@@ -242,7 +239,7 @@ static int __devexit ds1742_rtc_remove(struct platform_device *pdev)
 {
 	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
 
-	sysfs_remove_bin_file(&pdev->dev.kobj, &ds1742_nvram_attr);
+	sysfs_remove_bin_file(&pdev->dev.kobj, &pdata->nvram_attr);
 	rtc_device_unregister(pdata->rtc);
 	iounmap(pdata->ioaddr_nvram);
 	release_mem_region(pdata->baseaddr, pdata->size);
diff --git a/drivers/rtc/rtc-rx8025.c b/drivers/rtc/rtc-rx8025.c
new file mode 100644
index 00000000000..b1a29bcfdf1
--- /dev/null
+++ b/drivers/rtc/rtc-rx8025.c
@@ -0,0 +1,688 @@
+/*
+ * Driver for Epson's RTC module RX-8025 SA/NB
+ *
+ * Copyright (C) 2009 Wolfgang Grandegger <wg@grandegger.com>
+ *
+ * Copyright (C) 2005 by Digi International Inc.
+ * All rights reserved.
+ *
+ * Modified by fengjh at rising.com.cn
+ * <http://lists.lm-sensors.org/mailman/listinfo/lm-sensors>
+ * 2006.11
+ *
+ * Code cleanup by Sergei Poselenov, <sposelenov@emcraft.com>
+ * Converted to new style by Wolfgang Grandegger <wg@grandegger.com>
+ * Alarm and periodic interrupt added by Dmitry Rakhchev <rda@emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/bcd.h>
+#include <linux/i2c.h>
+#include <linux/list.h>
+#include <linux/rtc.h>
+
+/* Register definitions */
+#define RX8025_REG_SEC		0x00
+#define RX8025_REG_MIN		0x01
+#define RX8025_REG_HOUR		0x02
+#define RX8025_REG_WDAY		0x03
+#define RX8025_REG_MDAY		0x04
+#define RX8025_REG_MONTH	0x05
+#define RX8025_REG_YEAR		0x06
+#define RX8025_REG_DIGOFF	0x07
+#define RX8025_REG_ALWMIN	0x08
+#define RX8025_REG_ALWHOUR	0x09
+#define RX8025_REG_ALWWDAY	0x0a
+#define RX8025_REG_ALDMIN	0x0b
+#define RX8025_REG_ALDHOUR	0x0c
+/* 0x0d is reserved */
+#define RX8025_REG_CTRL1	0x0e
+#define RX8025_REG_CTRL2	0x0f
+
+#define RX8025_BIT_CTRL1_CT	(7 << 0)
+/* 1 Hz periodic level irq */
+#define RX8025_BIT_CTRL1_CT_1HZ	4
+#define RX8025_BIT_CTRL1_TEST	(1 << 3)
+#define RX8025_BIT_CTRL1_1224	(1 << 5)
+#define RX8025_BIT_CTRL1_DALE	(1 << 6)
+#define RX8025_BIT_CTRL1_WALE	(1 << 7)
+
+#define RX8025_BIT_CTRL2_DAFG	(1 << 0)
+#define RX8025_BIT_CTRL2_WAFG	(1 << 1)
+#define RX8025_BIT_CTRL2_CTFG	(1 << 2)
+#define RX8025_BIT_CTRL2_PON	(1 << 4)
+#define RX8025_BIT_CTRL2_XST	(1 << 5)
+#define RX8025_BIT_CTRL2_VDET	(1 << 6)
+
+/* Clock precision adjustment */
+#define RX8025_ADJ_RESOLUTION	3050 /* in ppb */
+#define RX8025_ADJ_DATA_MAX	62
+#define RX8025_ADJ_DATA_MIN	-62
+
+static const struct i2c_device_id rx8025_id[] = {
+	{ "rx8025", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, rx8025_id);
+
+struct rx8025_data {
+	struct i2c_client *client;
+	struct rtc_device *rtc;
+	struct work_struct work;
+	u8 ctrl1;
+	unsigned exiting:1;
+};
+
+static int rx8025_read_reg(struct i2c_client *client, int number, u8 *value)
+{
+	int ret = i2c_smbus_read_byte_data(client, (number << 4) | 0x08);
+
+	if (ret < 0) {
+		dev_err(&client->dev, "Unable to read register #%d\n", number);
+		return ret;
+	}
+
+	*value = ret;
+	return 0;
+}
+
+static int rx8025_read_regs(struct i2c_client *client,
+			    int number, u8 length, u8 *values)
+{
+	int ret = i2c_smbus_read_i2c_block_data(client, (number << 4) | 0x08,
+						length, values);
+
+	if (ret != length) {
+		dev_err(&client->dev, "Unable to read registers #%d..#%d\n",
+			number, number + length - 1);
+		return ret < 0 ? ret : -EIO;
+	}
+
+	return 0;
+}
+
+static int rx8025_write_reg(struct i2c_client *client, int number, u8 value)
+{
+	int ret = i2c_smbus_write_byte_data(client, number << 4, value);
+
+	if (ret)
+		dev_err(&client->dev, "Unable to write register #%d\n",
+			number);
+
+	return ret;
+}
+
+static int rx8025_write_regs(struct i2c_client *client,
+			     int number, u8 length, u8 *values)
+{
+	int ret = i2c_smbus_write_i2c_block_data(client, (number << 4) | 0x08,
+						 length, values);
+
+	if (ret)
+		dev_err(&client->dev, "Unable to write registers #%d..#%d\n",
+			number, number + length - 1);
+
+	return ret;
+}
+
+static irqreturn_t rx8025_irq(int irq, void *dev_id)
+{
+	struct i2c_client *client = dev_id;
+	struct rx8025_data *rx8025 = i2c_get_clientdata(client);
+
+	disable_irq_nosync(irq);
+	schedule_work(&rx8025->work);
+	return IRQ_HANDLED;
+}
+
+static void rx8025_work(struct work_struct *work)
+{
+	struct rx8025_data *rx8025 = container_of(work, struct rx8025_data,
+						  work);
+	struct i2c_client *client = rx8025->client;
+	struct mutex *lock = &rx8025->rtc->ops_lock;
+	u8 status;
+
+	mutex_lock(lock);
+
+	if (rx8025_read_reg(client, RX8025_REG_CTRL2, &status))
+		goto out;
+
+	if (!(status & RX8025_BIT_CTRL2_XST))
+		dev_warn(&client->dev, "Oscillation stop was detected,"
+			 "you may have to readjust the clock\n");
+
+	if (status & RX8025_BIT_CTRL2_CTFG) {
+		/* periodic */
+		status &= ~RX8025_BIT_CTRL2_CTFG;
+		local_irq_disable();
+		rtc_update_irq(rx8025->rtc, 1, RTC_PF | RTC_IRQF);
+		local_irq_enable();
+	}
+
+	if (status & RX8025_BIT_CTRL2_DAFG) {
+		/* alarm */
+		status &= RX8025_BIT_CTRL2_DAFG;
+		if (rx8025_write_reg(client, RX8025_REG_CTRL1,
+				     rx8025->ctrl1 & ~RX8025_BIT_CTRL1_DALE))
+			goto out;
+		local_irq_disable();
+		rtc_update_irq(rx8025->rtc, 1, RTC_AF | RTC_IRQF);
+		local_irq_enable();
+	}
+
+	/* acknowledge IRQ */
+	rx8025_write_reg(client, RX8025_REG_CTRL2,
+			 status | RX8025_BIT_CTRL2_XST);
+
+out:
+	if (!rx8025->exiting)
+		enable_irq(client->irq);
+
+	mutex_unlock(lock);
+}
+
+static int rx8025_get_time(struct device *dev, struct rtc_time *dt)
+{
+	struct rx8025_data *rx8025 = dev_get_drvdata(dev);
+	u8 date[7];
+	int err;
+
+	err = rx8025_read_regs(rx8025->client, RX8025_REG_SEC, 7, date);
+	if (err)
+		return err;
+
+	dev_dbg(dev, "%s: read 0x%02x 0x%02x "
+		"0x%02x 0x%02x 0x%02x 0x%02x 0x%02x\n", __func__,
+		date[0], date[1], date[2], date[3], date[4],
+		date[5], date[6]);
+
+	dt->tm_sec = bcd2bin(date[RX8025_REG_SEC] & 0x7f);
+	dt->tm_min = bcd2bin(date[RX8025_REG_MIN] & 0x7f);
+	if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224)
+		dt->tm_hour = bcd2bin(date[RX8025_REG_HOUR] & 0x3f);
+	else
+		dt->tm_hour = bcd2bin(date[RX8025_REG_HOUR] & 0x1f) % 12
+			+ (date[RX8025_REG_HOUR] & 0x20 ? 12 : 0);
+
+	dt->tm_mday = bcd2bin(date[RX8025_REG_MDAY] & 0x3f);
+	dt->tm_mon = bcd2bin(date[RX8025_REG_MONTH] & 0x1f) - 1;
+	dt->tm_year = bcd2bin(date[RX8025_REG_YEAR]);
+
+	if (dt->tm_year < 70)
+		dt->tm_year += 100;
+
+	dev_dbg(dev, "%s: date %ds %dm %dh %dmd %dm %dy\n", __func__,
+		dt->tm_sec, dt->tm_min, dt->tm_hour,
+		dt->tm_mday, dt->tm_mon, dt->tm_year);
+
+	return rtc_valid_tm(dt);
+}
+
+static int rx8025_set_time(struct device *dev, struct rtc_time *dt)
+{
+	struct rx8025_data *rx8025 = dev_get_drvdata(dev);
+	u8 date[7];
+
+	/*
+	 * BUG: The HW assumes every year that is a multiple of 4 to be a leap
+	 * year.  Next time this is wrong is 2100, which will not be a leap
+	 * year.
+	 */
+
+	/*
+	 * Here the read-only bits are written as "0".  I'm not sure if that
+	 * is sound.
+	 */
+	date[RX8025_REG_SEC] = bin2bcd(dt->tm_sec);
+	date[RX8025_REG_MIN] = bin2bcd(dt->tm_min);
+	if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224)
+		date[RX8025_REG_HOUR] = bin2bcd(dt->tm_hour);
+	else
+		date[RX8025_REG_HOUR] = (dt->tm_hour >= 12 ? 0x20 : 0)
+			| bin2bcd((dt->tm_hour + 11) % 12 + 1);
+
+	date[RX8025_REG_WDAY] = bin2bcd(dt->tm_wday);
+	date[RX8025_REG_MDAY] = bin2bcd(dt->tm_mday);
+	date[RX8025_REG_MONTH] = bin2bcd(dt->tm_mon + 1);
+	date[RX8025_REG_YEAR] = bin2bcd(dt->tm_year % 100);
+
+	dev_dbg(dev,
+		"%s: write 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x\n",
+		__func__,
+		date[0], date[1], date[2], date[3], date[4], date[5], date[6]);
+
+	return rx8025_write_regs(rx8025->client, RX8025_REG_SEC, 7, date);
+}
+
+static int rx8025_init_client(struct i2c_client *client, int *need_reset)
+{
+	struct rx8025_data *rx8025 = i2c_get_clientdata(client);
+	u8 ctrl[2], ctrl2;
+	int need_clear = 0;
+	int err;
+
+	err = rx8025_read_regs(rx8025->client, RX8025_REG_CTRL1, 2, ctrl);
+	if (err)
+		goto out;
+
+	/* Keep test bit zero ! */
+	rx8025->ctrl1 = ctrl[0] & ~RX8025_BIT_CTRL1_TEST;
+
+	if (ctrl[1] & RX8025_BIT_CTRL2_PON) {
+		dev_warn(&client->dev, "power-on reset was detected, "
+			 "you may have to readjust the clock\n");
+		*need_reset = 1;
+	}
+
+	if (ctrl[1] & RX8025_BIT_CTRL2_VDET) {
+		dev_warn(&client->dev, "a power voltage drop was detected, "
+			 "you may have to readjust the clock\n");
+		*need_reset = 1;
+	}
+
+	if (!(ctrl[1] & RX8025_BIT_CTRL2_XST)) {
+		dev_warn(&client->dev, "Oscillation stop was detected,"
+			 "you may have to readjust the clock\n");
+		*need_reset = 1;
+	}
+
+	if (ctrl[1] & (RX8025_BIT_CTRL2_DAFG | RX8025_BIT_CTRL2_WAFG)) {
+		dev_warn(&client->dev, "Alarm was detected\n");
+		need_clear = 1;
+	}
+
+	if (!(ctrl[1] & RX8025_BIT_CTRL2_CTFG))
+		need_clear = 1;
+
+	if (*need_reset || need_clear) {
+		ctrl2 = ctrl[0];
+		ctrl2 &= ~(RX8025_BIT_CTRL2_PON | RX8025_BIT_CTRL2_VDET |
+			   RX8025_BIT_CTRL2_CTFG | RX8025_BIT_CTRL2_WAFG |
+			   RX8025_BIT_CTRL2_DAFG);
+		ctrl2 |= RX8025_BIT_CTRL2_XST;
+
+		err = rx8025_write_reg(client, RX8025_REG_CTRL2, ctrl2);
+	}
+out:
+	return err;
+}
+
+/* Alarm support */
+static int rx8025_read_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct rx8025_data *rx8025 = dev_get_drvdata(dev);
+	struct i2c_client *client = rx8025->client;
+	u8 ctrl2, ald[2];
+	int err;
+
+	if (client->irq <= 0)
+		return -EINVAL;
+
+	err = rx8025_read_regs(client, RX8025_REG_ALDMIN, 2, ald);
+	if (err)
+		return err;
+
+	err = rx8025_read_reg(client, RX8025_REG_CTRL2, &ctrl2);
+	if (err)
+		return err;
+
+	dev_dbg(dev, "%s: read alarm 0x%02x 0x%02x ctrl2 %02x\n",
+		__func__, ald[0], ald[1], ctrl2);
+
+	/* Hardware alarms precision is 1 minute! */
+	t->time.tm_sec = 0;
+	t->time.tm_min = bcd2bin(ald[0] & 0x7f);
+	if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224)
+		t->time.tm_hour = bcd2bin(ald[1] & 0x3f);
+	else
+		t->time.tm_hour = bcd2bin(ald[1] & 0x1f) % 12
+			+ (ald[1] & 0x20 ? 12 : 0);
+
+	t->time.tm_wday = -1;
+	t->time.tm_mday = -1;
+	t->time.tm_mon = -1;
+	t->time.tm_year = -1;
+
+	dev_dbg(dev, "%s: date: %ds %dm %dh %dmd %dm %dy\n",
+		__func__,
+		t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
+		t->time.tm_mday, t->time.tm_mon, t->time.tm_year);
+	t->enabled = !!(rx8025->ctrl1 & RX8025_BIT_CTRL1_DALE);
+	t->pending = (ctrl2 & RX8025_BIT_CTRL2_DAFG) && t->enabled;
+
+	return err;
+}
+
+static int rx8025_set_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct rx8025_data *rx8025 = dev_get_drvdata(dev);
+	u8 ald[2];
+	int err;
+
+	if (client->irq <= 0)
+		return -EINVAL;
+
+	/* Hardware alarm precision is 1 minute! */
+	ald[0] = bin2bcd(t->time.tm_min);
+	if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224)
+		ald[1] = bin2bcd(t->time.tm_hour);
+	else
+		ald[1] = (t->time.tm_hour >= 12 ? 0x20 : 0)
+			| bin2bcd((t->time.tm_hour + 11) % 12 + 1);
+
+	dev_dbg(dev, "%s: write 0x%02x 0x%02x\n", __func__, ald[0], ald[1]);
+
+	if (rx8025->ctrl1 & RX8025_BIT_CTRL1_DALE) {
+		rx8025->ctrl1 &= ~RX8025_BIT_CTRL1_DALE;
+		err = rx8025_write_reg(rx8025->client, RX8025_REG_CTRL1,
+				       rx8025->ctrl1);
+		if (err)
+			return err;
+	}
+	err = rx8025_write_regs(rx8025->client, RX8025_REG_ALDMIN, 2, ald);
+	if (err)
+		return err;
+
+	if (t->enabled) {
+		rx8025->ctrl1 |= RX8025_BIT_CTRL1_DALE;
+		err = rx8025_write_reg(rx8025->client, RX8025_REG_CTRL1,
+				       rx8025->ctrl1);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static int rx8025_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct rx8025_data *rx8025 = dev_get_drvdata(dev);
+	u8 ctrl1;
+	int err;
+
+	ctrl1 = rx8025->ctrl1;
+	if (enabled)
+		ctrl1 |= RX8025_BIT_CTRL1_DALE;
+	else
+		ctrl1 &= ~RX8025_BIT_CTRL1_DALE;
+
+	if (ctrl1 != rx8025->ctrl1) {
+		rx8025->ctrl1 = ctrl1;
+		err = rx8025_write_reg(rx8025->client, RX8025_REG_CTRL1,
+				       rx8025->ctrl1);
+		if (err)
+			return err;
+	}
+	return 0;
+}
+
+static int rx8025_irq_set_state(struct device *dev, int enabled)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct rx8025_data *rx8025 = i2c_get_clientdata(client);
+	int ctrl1;
+	int err;
+
+	if (client->irq <= 0)
+		return -ENXIO;
+
+	ctrl1 = rx8025->ctrl1 & ~RX8025_BIT_CTRL1_CT;
+	if (enabled)
+		ctrl1 |= RX8025_BIT_CTRL1_CT_1HZ;
+	if (ctrl1 != rx8025->ctrl1) {
+		rx8025->ctrl1 = ctrl1;
+		err = rx8025_write_reg(rx8025->client, RX8025_REG_CTRL1,
+				       rx8025->ctrl1);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static struct rtc_class_ops rx8025_rtc_ops = {
+	.read_time = rx8025_get_time,
+	.set_time = rx8025_set_time,
+	.read_alarm = rx8025_read_alarm,
+	.set_alarm = rx8025_set_alarm,
+	.alarm_irq_enable = rx8025_alarm_irq_enable,
+	.irq_set_state  = rx8025_irq_set_state,
+};
+
+/*
+ * Clock precision adjustment support
+ *
+ * According to the RX8025 SA/NB application manual the frequency and
+ * temperature charateristics can be approximated using the following
+ * equation:
+ *
+ *   df = a * (ut - t)**2
+ *
+ *   df: Frequency deviation in any temperature
+ *   a : Coefficient = (-35 +-5) * 10**-9
+ *   ut: Ultimate temperature in degree = +25 +-5 degree
+ *   t : Any temperature in degree
+ *
+ * Note that the clock adjustment in ppb must be entered (which is
+ * the negative value of the deviation).
+ */
+static int rx8025_get_clock_adjust(struct device *dev, int *adj)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	u8 digoff;
+	int err;
+
+	err = rx8025_read_reg(client, RX8025_REG_DIGOFF, &digoff);
+	if (err)
+		return err;
+
+	*adj = digoff >= 64 ? digoff - 128 : digoff;
+	if (*adj > 0)
+		(*adj)--;
+	*adj *= -RX8025_ADJ_RESOLUTION;
+
+	return 0;
+}
+
+static int rx8025_set_clock_adjust(struct device *dev, int adj)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	u8 digoff;
+	int err;
+
+	adj /= -RX8025_ADJ_RESOLUTION;
+	if (adj > RX8025_ADJ_DATA_MAX)
+		adj = RX8025_ADJ_DATA_MAX;
+	else if (adj < RX8025_ADJ_DATA_MIN)
+		adj = RX8025_ADJ_DATA_MIN;
+	else if (adj > 0)
+		adj++;
+	else if (adj < 0)
+		adj += 128;
+	digoff = adj;
+
+	err = rx8025_write_reg(client, RX8025_REG_DIGOFF, digoff);
+	if (err)
+		return err;
+
+	dev_dbg(dev, "%s: write 0x%02x\n", __func__, digoff);
+
+	return 0;
+}
+
+static ssize_t rx8025_sysfs_show_clock_adjust(struct device *dev,
+					      struct device_attribute *attr,
+					      char *buf)
+{
+	int err, adj;
+
+	err = rx8025_get_clock_adjust(dev, &adj);
+	if (err)
+		return err;
+
+	return sprintf(buf, "%d\n", adj);
+}
+
+static ssize_t rx8025_sysfs_store_clock_adjust(struct device *dev,
+					       struct device_attribute *attr,
+					       const char *buf, size_t count)
+{
+	int adj, err;
+
+	if (sscanf(buf, "%i", &adj) != 1)
+		return -EINVAL;
+
+	err = rx8025_set_clock_adjust(dev, adj);
+
+	return err ? err : count;
+}
+
+static DEVICE_ATTR(clock_adjust_ppb, S_IRUGO | S_IWUSR,
+		   rx8025_sysfs_show_clock_adjust,
+		   rx8025_sysfs_store_clock_adjust);
+
+static int rx8025_sysfs_register(struct device *dev)
+{
+	return device_create_file(dev, &dev_attr_clock_adjust_ppb);
+}
+
+static void rx8025_sysfs_unregister(struct device *dev)
+{
+	device_remove_file(dev, &dev_attr_clock_adjust_ppb);
+}
+
+static int __devinit rx8025_probe(struct i2c_client *client,
+				  const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+	struct rx8025_data *rx8025;
+	int err, need_reset = 0;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
+				     | I2C_FUNC_SMBUS_I2C_BLOCK)) {
+		dev_err(&adapter->dev,
+			"doesn't support required functionality\n");
+		err = -EIO;
+		goto errout;
+	}
+
+	rx8025 = kzalloc(sizeof(*rx8025), GFP_KERNEL);
+	if (!rx8025) {
+		dev_err(&adapter->dev, "failed to alloc memory\n");
+		err = -ENOMEM;
+		goto errout;
+	}
+
+	rx8025->client = client;
+	i2c_set_clientdata(client, rx8025);
+	INIT_WORK(&rx8025->work, rx8025_work);
+
+	err = rx8025_init_client(client, &need_reset);
+	if (err)
+		goto errout_free;
+
+	if (need_reset) {
+		struct rtc_time tm;
+		dev_info(&client->dev,
+			 "bad conditions detected, resetting date\n");
+		rtc_time_to_tm(0, &tm);	/* 1970/1/1 */
+		rx8025_set_time(&client->dev, &tm);
+	}
+
+	rx8025->rtc = rtc_device_register(client->name, &client->dev,
+					  &rx8025_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rx8025->rtc)) {
+		err = PTR_ERR(rx8025->rtc);
+		dev_err(&client->dev, "unable to register the class device\n");
+		goto errout_free;
+	}
+
+	if (client->irq > 0) {
+		dev_info(&client->dev, "IRQ %d supplied\n", client->irq);
+		err = request_irq(client->irq, rx8025_irq,
+				  0, "rx8025", client);
+		if (err) {
+			dev_err(&client->dev, "unable to request IRQ\n");
+			goto errout_reg;
+		}
+	}
+
+	rx8025->rtc->irq_freq = 1;
+	rx8025->rtc->max_user_freq = 1;
+
+	err = rx8025_sysfs_register(&client->dev);
+	if (err)
+		goto errout_irq;
+
+	return 0;
+
+errout_irq:
+	if (client->irq > 0)
+		free_irq(client->irq, client);
+
+errout_reg:
+	rtc_device_unregister(rx8025->rtc);
+
+errout_free:
+	i2c_set_clientdata(client, NULL);
+	kfree(rx8025);
+
+errout:
+	dev_err(&adapter->dev, "probing for rx8025 failed\n");
+	return err;
+}
+
+static int __devexit rx8025_remove(struct i2c_client *client)
+{
+	struct rx8025_data *rx8025 = i2c_get_clientdata(client);
+	struct mutex *lock = &rx8025->rtc->ops_lock;
+
+	if (client->irq > 0) {
+		mutex_lock(lock);
+		rx8025->exiting = 1;
+		mutex_unlock(lock);
+
+		free_irq(client->irq, client);
+		flush_scheduled_work();
+	}
+
+	rx8025_sysfs_unregister(&client->dev);
+	rtc_device_unregister(rx8025->rtc);
+	i2c_set_clientdata(client, NULL);
+	kfree(rx8025);
+	return 0;
+}
+
+static struct i2c_driver rx8025_driver = {
+	.driver = {
+		.name = "rtc-rx8025",
+		.owner = THIS_MODULE,
+	},
+	.probe		= rx8025_probe,
+	.remove		= __devexit_p(rx8025_remove),
+	.id_table	= rx8025_id,
+};
+
+static int __init rx8025_init(void)
+{
+	return i2c_add_driver(&rx8025_driver);
+}
+
+static void __exit rx8025_exit(void)
+{
+	i2c_del_driver(&rx8025_driver);
+}
+
+MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
+MODULE_DESCRIPTION("RX-8025 SA/NB RTC driver");
+MODULE_LICENSE("GPL");
+
+module_init(rx8025_init);
+module_exit(rx8025_exit);
diff --git a/drivers/rtc/rtc-test.c b/drivers/rtc/rtc-test.c
index e478280ff62..51725f7755b 100644
--- a/drivers/rtc/rtc-test.c
+++ b/drivers/rtc/rtc-test.c
@@ -93,7 +93,6 @@ static ssize_t test_irq_store(struct device *dev,
 	struct rtc_device *rtc = platform_get_drvdata(plat_dev);
 
 	retval = count;
-	local_irq_disable();
 	if (strncmp(buf, "tick", 4) == 0)
 		rtc_update_irq(rtc, 1, RTC_PF | RTC_IRQF);
 	else if (strncmp(buf, "alarm", 5) == 0)
@@ -102,7 +101,6 @@ static ssize_t test_irq_store(struct device *dev,
 		rtc_update_irq(rtc, 1, RTC_UF | RTC_IRQF);
 	else
 		retval = -EINVAL;
-	local_irq_enable();
 
 	return retval;
 }
diff --git a/drivers/rtc/rtc-tx4939.c b/drivers/rtc/rtc-tx4939.c
index 4ee4857ff20..4a6ed1104fb 100644
--- a/drivers/rtc/rtc-tx4939.c
+++ b/drivers/rtc/rtc-tx4939.c
@@ -261,10 +261,8 @@ static int __init tx4939_rtc_probe(struct platform_device *pdev)
 
 	tx4939_rtc_cmd(pdata->rtcreg, TX4939_RTCCTL_COMMAND_NOP);
 	if (devm_request_irq(&pdev->dev, irq, tx4939_rtc_interrupt,
-			     IRQF_DISABLED | IRQF_SHARED,
-			     pdev->name, &pdev->dev) < 0) {
+			     IRQF_DISABLED, pdev->name, &pdev->dev) < 0)
 		return -EBUSY;
-	}
 	rtc = rtc_device_register(pdev->name, &pdev->dev,
 				  &tx4939_rtc_ops, THIS_MODULE);
 	if (IS_ERR(rtc))
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index e5b84db0aa0..74983666865 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -470,7 +470,7 @@ static int dasd_decrease_state(struct dasd_device *device)
  */
 static void dasd_change_state(struct dasd_device *device)
 {
-        int rc;
+	int rc;
 
 	if (device->state == device->target)
 		/* Already where we want to go today... */
@@ -479,8 +479,10 @@ static void dasd_change_state(struct dasd_device *device)
 		rc = dasd_increase_state(device);
 	else
 		rc = dasd_decrease_state(device);
-        if (rc && rc != -EAGAIN)
-                device->target = device->state;
+	if (rc == -EAGAIN)
+		return;
+	if (rc)
+		device->target = device->state;
 
 	if (device->state == device->target) {
 		wake_up(&dasd_init_waitq);
@@ -2503,15 +2505,25 @@ int dasd_generic_restore_device(struct ccw_device *cdev)
 	if (IS_ERR(device))
 		return PTR_ERR(device);
 
+	/* allow new IO again */
+	device->stopped &= ~DASD_STOPPED_PM;
+	device->stopped &= ~DASD_UNRESUMED_PM;
+
 	dasd_schedule_device_bh(device);
 	if (device->block)
 		dasd_schedule_block_bh(device->block);
 
 	if (device->discipline->restore)
 		rc = device->discipline->restore(device);
+	if (rc)
+		/*
+		 * if the resume failed for the DASD we put it in
+		 * an UNRESUMED stop state
+		 */
+		device->stopped |= DASD_UNRESUMED_PM;
 
 	dasd_put_device(device);
-	return rc;
+	return 0;
 }
 EXPORT_SYMBOL_GPL(dasd_generic_restore_device);
 
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 1c28ec3e4cc..f8b1f04f26b 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -3243,9 +3243,6 @@ int dasd_eckd_restore_device(struct dasd_device *device)
 	int is_known, rc;
 	struct dasd_uid temp_uid;
 
-	/* allow new IO again */
-	device->stopped &= ~DASD_STOPPED_PM;
-
 	private = (struct dasd_eckd_private *) device->private;
 
 	/* Read Configuration Data */
@@ -3295,12 +3292,7 @@ int dasd_eckd_restore_device(struct dasd_device *device)
 	return 0;
 
 out_err:
-	/*
-	 * if the resume failed for the DASD we put it in
-	 * an UNRESUMED stop state
-	 */
-	device->stopped |= DASD_UNRESUMED_PM;
-	return 0;
+	return -1;
 }
 
 static struct ccw_driver dasd_eckd_driver = {
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index 04dc734805c..21639d6c996 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -20,10 +20,7 @@
 #include <linux/interrupt.h>
 #include <linux/err.h>
 #include <linux/reboot.h>
-
 #include <linux/slab.h>
-#include <linux/bootmem.h>
-
 #include <asm/ccwdev.h>
 #include <asm/cio.h>
 #include <asm/io.h>
@@ -735,7 +732,7 @@ static int raw3215_pm_stop(struct ccw_device *cdev)
 	unsigned long flags;
 
 	/* Empty the output buffer, then prevent new I/O. */
-	raw = cdev->dev.driver_data;
+	raw = dev_get_drvdata(&cdev->dev);
 	spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
 	raw3215_make_room(raw, RAW3215_BUFFER_SIZE);
 	raw->flags |= RAW3215_FROZEN;
@@ -749,7 +746,7 @@ static int raw3215_pm_start(struct ccw_device *cdev)
 	unsigned long flags;
 
 	/* Allow I/O again and flush output buffer. */
-	raw = cdev->dev.driver_data;
+	raw = dev_get_drvdata(&cdev->dev);
 	spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
 	raw->flags &= ~RAW3215_FROZEN;
 	raw->flags |= RAW3215_FLUSHING;
@@ -883,7 +880,7 @@ static int __init con3215_init(void)
 	raw3215_freelist = NULL;
 	spin_lock_init(&raw3215_freelist_lock);
 	for (i = 0; i < NR_3215_REQ; i++) {
-		req = (struct raw3215_req *) alloc_bootmem_low(sizeof(struct raw3215_req));
+		req = kzalloc(sizeof(struct raw3215_req), GFP_KERNEL | GFP_DMA);
 		req->next = raw3215_freelist;
 		raw3215_freelist = req;
 	}
@@ -893,10 +890,9 @@ static int __init con3215_init(void)
 		return -ENODEV;
 
 	raw3215[0] = raw = (struct raw3215_info *)
-		alloc_bootmem_low(sizeof(struct raw3215_info));
-	memset(raw, 0, sizeof(struct raw3215_info));
-	raw->buffer = (char *) alloc_bootmem_low(RAW3215_BUFFER_SIZE);
-	raw->inbuf = (char *) alloc_bootmem_low(RAW3215_INBUF_SIZE);
+		kzalloc(sizeof(struct raw3215_info), GFP_KERNEL | GFP_DMA);
+	raw->buffer = kzalloc(RAW3215_BUFFER_SIZE, GFP_KERNEL | GFP_DMA);
+	raw->inbuf = kzalloc(RAW3215_INBUF_SIZE, GFP_KERNEL | GFP_DMA);
 	raw->cdev = cdev;
 	dev_set_drvdata(&cdev->dev, raw);
 	cdev->handler = raw3215_irq;
@@ -906,9 +902,9 @@ static int __init con3215_init(void)
 
 	/* Request the console irq */
 	if (raw3215_startup(raw) != 0) {
-		free_bootmem((unsigned long) raw->inbuf, RAW3215_INBUF_SIZE);
-		free_bootmem((unsigned long) raw->buffer, RAW3215_BUFFER_SIZE);
-		free_bootmem((unsigned long) raw, sizeof(struct raw3215_info));
+		kfree(raw->inbuf);
+		kfree(raw->buffer);
+		kfree(raw);
 		raw3215[0] = NULL;
 		return -ENODEV;
 	}
diff --git a/drivers/s390/char/con3270.c b/drivers/s390/char/con3270.c
index 44d02e371c0..bb838bdf829 100644
--- a/drivers/s390/char/con3270.c
+++ b/drivers/s390/char/con3270.c
@@ -7,7 +7,6 @@
  *     Copyright IBM Corp. 2003, 2009
  */
 
-#include <linux/bootmem.h>
 #include <linux/console.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -600,16 +599,14 @@ con3270_init(void)
 	if (IS_ERR(rp))
 		return PTR_ERR(rp);
 
-	condev = (struct con3270 *) alloc_bootmem_low(sizeof(struct con3270));
-	memset(condev, 0, sizeof(struct con3270));
+	condev = kzalloc(sizeof(struct con3270), GFP_KERNEL | GFP_DMA);
 	condev->view.dev = rp;
 
-	condev->read = raw3270_request_alloc_bootmem(0);
+	condev->read = raw3270_request_alloc(0);
 	condev->read->callback = con3270_read_callback;
 	condev->read->callback_data = condev;
-	condev->write = 
-		raw3270_request_alloc_bootmem(CON3270_OUTPUT_BUFFER_SIZE);
-	condev->kreset = raw3270_request_alloc_bootmem(1);
+	condev->write = raw3270_request_alloc(CON3270_OUTPUT_BUFFER_SIZE);
+	condev->kreset = raw3270_request_alloc(1);
 
 	INIT_LIST_HEAD(&condev->lines);
 	INIT_LIST_HEAD(&condev->update);
@@ -623,7 +620,7 @@ con3270_init(void)
 
 	INIT_LIST_HEAD(&condev->freemem);
 	for (i = 0; i < CON3270_STRING_PAGES; i++) {
-		cbuf = (void *) alloc_bootmem_low_pages(PAGE_SIZE);
+		cbuf = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
 		add_string_memory(&condev->freemem, cbuf, PAGE_SIZE);
 	}
 	condev->cline = alloc_string(&condev->freemem, condev->view.cols);
diff --git a/drivers/s390/char/monreader.c b/drivers/s390/char/monreader.c
index 75a8831eebb..7892550d793 100644
--- a/drivers/s390/char/monreader.c
+++ b/drivers/s390/char/monreader.c
@@ -320,7 +320,7 @@ static int mon_open(struct inode *inode, struct file *filp)
 		goto out_path;
 	}
 	filp->private_data = monpriv;
-	monreader_device->driver_data = monpriv;
+	dev_set_drvdata(&monreader_device, monpriv);
 	unlock_kernel();
 	return nonseekable_open(inode, filp);
 
@@ -463,7 +463,7 @@ static struct miscdevice mon_dev = {
  *****************************************************************************/
 static int monreader_freeze(struct device *dev)
 {
-	struct mon_private *monpriv = dev->driver_data;
+	struct mon_private *monpriv = dev_get_drvdata(&dev);
 	int rc;
 
 	if (!monpriv)
@@ -487,7 +487,7 @@ static int monreader_freeze(struct device *dev)
 
 static int monreader_thaw(struct device *dev)
 {
-	struct mon_private *monpriv = dev->driver_data;
+	struct mon_private *monpriv = dev_get_drvdata(dev);
 	int rc;
 
 	if (!monpriv)
diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c
index acab7b2dfe8..d6a022f55e9 100644
--- a/drivers/s390/char/raw3270.c
+++ b/drivers/s390/char/raw3270.c
@@ -7,7 +7,6 @@
  *     Copyright IBM Corp. 2003, 2009
  */
 
-#include <linux/bootmem.h>
 #include <linux/module.h>
 #include <linux/err.h>
 #include <linux/init.h>
@@ -143,33 +142,6 @@ raw3270_request_alloc(size_t size)
 	return rq;
 }
 
-#ifdef CONFIG_TN3270_CONSOLE
-/*
- * Allocate a new 3270 ccw request from bootmem. Only works very
- * early in the boot process. Only con3270.c should be using this.
- */
-struct raw3270_request __init *raw3270_request_alloc_bootmem(size_t size)
-{
-	struct raw3270_request *rq;
-
-	rq = alloc_bootmem_low(sizeof(struct raw3270));
-
-	/* alloc output buffer. */
-	if (size > 0)
-		rq->buffer = alloc_bootmem_low(size);
-	rq->size = size;
-	INIT_LIST_HEAD(&rq->list);
-
-	/*
-	 * Setup ccw.
-	 */
-	rq->ccw.cda = __pa(rq->buffer);
-	rq->ccw.flags = CCW_FLAG_SLI;
-
-	return rq;
-}
-#endif
-
 /*
  * Free 3270 ccw request
  */
@@ -846,8 +818,8 @@ struct raw3270 __init *raw3270_setup_console(struct ccw_device *cdev)
 	char *ascebc;
 	int rc;
 
-	rp = (struct raw3270 *) alloc_bootmem_low(sizeof(struct raw3270));
-	ascebc = (char *) alloc_bootmem(256);
+	rp = kzalloc(sizeof(struct raw3270), GFP_KERNEL | GFP_DMA);
+	ascebc = kzalloc(256, GFP_KERNEL);
 	rc = raw3270_setup_device(cdev, rp, ascebc);
 	if (rc)
 		return ERR_PTR(rc);
@@ -1350,7 +1322,7 @@ static int raw3270_pm_stop(struct ccw_device *cdev)
 	struct raw3270_view *view;
 	unsigned long flags;
 
-	rp = cdev->dev.driver_data;
+	rp = dev_get_drvdata(&cdev->dev);
 	if (!rp)
 		return 0;
 	spin_lock_irqsave(get_ccwdev_lock(rp->cdev), flags);
@@ -1376,7 +1348,7 @@ static int raw3270_pm_start(struct ccw_device *cdev)
 	struct raw3270 *rp;
 	unsigned long flags;
 
-	rp = cdev->dev.driver_data;
+	rp = dev_get_drvdata(&cdev->dev);
 	if (!rp)
 		return 0;
 	spin_lock_irqsave(get_ccwdev_lock(rp->cdev), flags);
diff --git a/drivers/s390/char/sclp_con.c b/drivers/s390/char/sclp_con.c
index 336811a7767..ad698d30cb3 100644
--- a/drivers/s390/char/sclp_con.c
+++ b/drivers/s390/char/sclp_con.c
@@ -11,7 +11,6 @@
 #include <linux/init.h>
 #include <linux/timer.h>
 #include <linux/jiffies.h>
-#include <linux/bootmem.h>
 #include <linux/termios.h>
 #include <linux/err.h>
 #include <linux/reboot.h>
@@ -110,7 +109,7 @@ static void sclp_console_sync_queue(void)
 
 	spin_lock_irqsave(&sclp_con_lock, flags);
 	if (timer_pending(&sclp_con_timer))
-		del_timer_sync(&sclp_con_timer);
+		del_timer(&sclp_con_timer);
 	while (sclp_con_queue_running) {
 		spin_unlock_irqrestore(&sclp_con_lock, flags);
 		sclp_sync_wait();
@@ -298,8 +297,8 @@ sclp_console_init(void)
 	/* Allocate pages for output buffering */
 	INIT_LIST_HEAD(&sclp_con_pages);
 	for (i = 0; i < MAX_CONSOLE_PAGES; i++) {
-		page = alloc_bootmem_low_pages(PAGE_SIZE);
-		list_add_tail((struct list_head *) page, &sclp_con_pages);
+		page = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
+		list_add_tail(page, &sclp_con_pages);
 	}
 	INIT_LIST_HEAD(&sclp_con_outqueue);
 	spin_lock_init(&sclp_con_lock);
diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c
index 5518e24946a..178724f2a4c 100644
--- a/drivers/s390/char/sclp_vt220.c
+++ b/drivers/s390/char/sclp_vt220.c
@@ -20,7 +20,6 @@
 #include <linux/major.h>
 #include <linux/console.h>
 #include <linux/kdev_t.h>
-#include <linux/bootmem.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/reboot.h>
@@ -601,10 +600,7 @@ static void __init __sclp_vt220_free_pages(void)
 
 	list_for_each_safe(page, p, &sclp_vt220_empty) {
 		list_del(page);
-		if (slab_is_available())
-			free_page((unsigned long) page);
-		else
-			free_bootmem((unsigned long) page, PAGE_SIZE);
+		free_page((unsigned long) page);
 	}
 }
 
@@ -640,16 +636,12 @@ static int __init __sclp_vt220_init(int num_pages)
 	sclp_vt220_flush_later = 0;
 
 	/* Allocate pages for output buffering */
+	rc = -ENOMEM;
 	for (i = 0; i < num_pages; i++) {
-		if (slab_is_available())
-			page = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
-		else
-			page = alloc_bootmem_low_pages(PAGE_SIZE);
-		if (!page) {
-			rc = -ENOMEM;
+		page = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
+		if (!page)
 			goto out;
-		}
-		list_add_tail((struct list_head *) page, &sclp_vt220_empty);
+		list_add_tail(page, &sclp_vt220_empty);
 	}
 	rc = sclp_register(&sclp_vt220_register);
 out:
diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c
index 595aa04cfd0..1d420d94759 100644
--- a/drivers/s390/char/tape_core.c
+++ b/drivers/s390/char/tape_core.c
@@ -396,7 +396,7 @@ int tape_generic_pm_suspend(struct ccw_device *cdev)
 {
 	struct tape_device *device;
 
-	device = cdev->dev.driver_data;
+	device = dev_get_drvdata(&cdev->dev);
 	if (!device) {
 		return -ENODEV;
 	}
diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c
index 411cfa3c771..c20a4fe6da5 100644
--- a/drivers/s390/char/vmlogrdr.c
+++ b/drivers/s390/char/vmlogrdr.c
@@ -663,7 +663,7 @@ static struct attribute *vmlogrdr_attrs[] = {
 static int vmlogrdr_pm_prepare(struct device *dev)
 {
 	int rc;
-	struct vmlogrdr_priv_t *priv = dev->driver_data;
+	struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev);
 
 	rc = 0;
 	if (priv) {
@@ -753,7 +753,7 @@ static int vmlogrdr_register_device(struct vmlogrdr_priv_t *priv)
 		dev->bus = &iucv_bus;
 		dev->parent = iucv_root;
 		dev->driver = &vmlogrdr_driver;
-		dev->driver_data = priv;
+		dev_set_drvdata(dev, priv);
 		/*
 		 * The release function could be called after the
 		 * module has been unloaded. It's _only_ task is to
diff --git a/drivers/s390/char/vmur.c b/drivers/s390/char/vmur.c
index 7d9e67cb647..31b902e94f7 100644
--- a/drivers/s390/char/vmur.c
+++ b/drivers/s390/char/vmur.c
@@ -170,7 +170,7 @@ static void urdev_put(struct urdev *urd)
  */
 static int ur_pm_suspend(struct ccw_device *cdev)
 {
-	struct urdev *urd = cdev->dev.driver_data;
+	struct urdev *urd = dev_get_drvdata(&cdev->dev);
 
 	TRACE("ur_pm_suspend: cdev=%p\n", cdev);
 	if (urd->open_flag) {
diff --git a/drivers/s390/cio/qdio.h b/drivers/s390/cio/qdio.h
index 13bcb811438..b1241f8fae8 100644
--- a/drivers/s390/cio/qdio.h
+++ b/drivers/s390/cio/qdio.h
@@ -351,15 +351,6 @@ static inline unsigned long long get_usecs(void)
 	((bufnr - dec) & QDIO_MAX_BUFFERS_MASK)
 
 /* prototypes for thin interrupt */
-void qdio_sync_after_thinint(struct qdio_q *q);
-int get_buf_state(struct qdio_q *q, unsigned int bufnr, unsigned char *state,
-		  int auto_ack);
-void qdio_check_outbound_after_thinint(struct qdio_q *q);
-int qdio_inbound_q_moved(struct qdio_q *q);
-void qdio_kick_handler(struct qdio_q *q);
-void qdio_stop_polling(struct qdio_q *q);
-int qdio_siga_sync_q(struct qdio_q *q);
-
 void qdio_setup_thinint(struct qdio_irq *irq_ptr);
 int qdio_establish_thinint(struct qdio_irq *irq_ptr);
 void qdio_shutdown_thinint(struct qdio_irq *irq_ptr);
@@ -392,4 +383,6 @@ void qdio_setup_destroy_sysfs(struct ccw_device *cdev);
 int qdio_setup_init(void);
 void qdio_setup_exit(void);
 
+int debug_get_buf_state(struct qdio_q *q, unsigned int bufnr,
+			unsigned char *state);
 #endif /* _CIO_QDIO_H */
diff --git a/drivers/s390/cio/qdio_debug.c b/drivers/s390/cio/qdio_debug.c
index e3434b34f86..b8626d4df11 100644
--- a/drivers/s390/cio/qdio_debug.c
+++ b/drivers/s390/cio/qdio_debug.c
@@ -70,9 +70,8 @@ static int qstat_show(struct seq_file *m, void *v)
 	seq_printf(m, "slsb buffer states:\n");
 	seq_printf(m, "|0      |8      |16     |24     |32     |40     |48     |56  63|\n");
 
-	qdio_siga_sync_q(q);
 	for (i = 0; i < QDIO_MAX_BUFFERS_PER_Q; i++) {
-		get_buf_state(q, i, &state, 0);
+		debug_get_buf_state(q, i, &state);
 		switch (state) {
 		case SLSB_P_INPUT_NOT_INIT:
 		case SLSB_P_OUTPUT_NOT_INIT:
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index d79cf5bf0e6..0038750ad94 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -231,8 +231,8 @@ static inline int get_buf_states(struct qdio_q *q, unsigned int bufnr,
 	return i;
 }
 
-inline int get_buf_state(struct qdio_q *q, unsigned int bufnr,
-		  unsigned char *state, int auto_ack)
+static inline int get_buf_state(struct qdio_q *q, unsigned int bufnr,
+				unsigned char *state, int auto_ack)
 {
 	return get_buf_states(q, bufnr, state, 1, auto_ack);
 }
@@ -276,7 +276,7 @@ void qdio_init_buf_states(struct qdio_irq *irq_ptr)
 			       QDIO_MAX_BUFFERS_PER_Q);
 }
 
-static int qdio_siga_sync(struct qdio_q *q, unsigned int output,
+static inline int qdio_siga_sync(struct qdio_q *q, unsigned int output,
 			  unsigned int input)
 {
 	int cc;
@@ -293,7 +293,7 @@ static int qdio_siga_sync(struct qdio_q *q, unsigned int output,
 	return cc;
 }
 
-inline int qdio_siga_sync_q(struct qdio_q *q)
+static inline int qdio_siga_sync_q(struct qdio_q *q)
 {
 	if (q->is_input_q)
 		return qdio_siga_sync(q, 0, q->mask);
@@ -358,8 +358,7 @@ static inline int qdio_siga_input(struct qdio_q *q)
 	return cc;
 }
 
-/* called from thinint inbound handler */
-void qdio_sync_after_thinint(struct qdio_q *q)
+static inline void qdio_sync_after_thinint(struct qdio_q *q)
 {
 	if (pci_out_supported(q)) {
 		if (need_siga_sync_thinint(q))
@@ -370,7 +369,14 @@ void qdio_sync_after_thinint(struct qdio_q *q)
 		qdio_siga_sync_q(q);
 }
 
-inline void qdio_stop_polling(struct qdio_q *q)
+int debug_get_buf_state(struct qdio_q *q, unsigned int bufnr,
+			unsigned char *state)
+{
+	qdio_siga_sync_q(q);
+	return get_buf_states(q, bufnr, state, 1, 0);
+}
+
+static inline void qdio_stop_polling(struct qdio_q *q)
 {
 	if (!q->u.in.polling)
 		return;
@@ -449,13 +455,6 @@ static inline void inbound_primed(struct qdio_q *q, int count)
 	count--;
 	if (!count)
 		return;
-
-	/*
-	 * Need to change all PRIMED buffers to NOT_INIT, otherwise
-	 * we're loosing initiative in the thinint code.
-	 */
-	set_buf_states(q, q->first_to_check, SLSB_P_INPUT_NOT_INIT,
-		       count);
 }
 
 static int get_inbound_buffer_frontier(struct qdio_q *q)
@@ -470,19 +469,13 @@ static int get_inbound_buffer_frontier(struct qdio_q *q)
 	count = min(atomic_read(&q->nr_buf_used), QDIO_MAX_BUFFERS_MASK);
 	stop = add_buf(q->first_to_check, count);
 
-	/*
-	 * No siga sync here, as a PCI or we after a thin interrupt
-	 * will sync the queues.
-	 */
-
-	/* need to set count to 1 for non-qebsm */
-	if (!is_qebsm(q))
-		count = 1;
-
-check_next:
 	if (q->first_to_check == stop)
 		goto out;
 
+	/*
+	 * No siga sync here, as a PCI or we after a thin interrupt
+	 * already sync'ed the queues.
+	 */
 	count = get_buf_states(q, q->first_to_check, &state, count, 1);
 	if (!count)
 		goto out;
@@ -490,14 +483,9 @@ check_next:
 	switch (state) {
 	case SLSB_P_INPUT_PRIMED:
 		inbound_primed(q, count);
-		/*
-		 * No siga-sync needed for non-qebsm here, as the inbound queue
-		 * will be synced on the next siga-r, resp.
-		 * tiqdio_is_inbound_q_done will do the siga-sync.
-		 */
 		q->first_to_check = add_buf(q->first_to_check, count);
 		atomic_sub(count, &q->nr_buf_used);
-		goto check_next;
+		break;
 	case SLSB_P_INPUT_ERROR:
 		announce_buffer_error(q, count);
 		/* process the buffer, the upper layer will take care of it */
@@ -516,7 +504,7 @@ out:
 	return q->first_to_check;
 }
 
-int qdio_inbound_q_moved(struct qdio_q *q)
+static int qdio_inbound_q_moved(struct qdio_q *q)
 {
 	int bufnr;
 
@@ -524,35 +512,32 @@ int qdio_inbound_q_moved(struct qdio_q *q)
 
 	if ((bufnr != q->last_move) || q->qdio_error) {
 		q->last_move = bufnr;
-		if (!need_siga_sync(q) && !pci_out_supported(q))
+		if (!is_thinint_irq(q->irq_ptr) && !MACHINE_IS_VM)
 			q->u.in.timestamp = get_usecs();
-
-		DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "in moved");
 		return 1;
 	} else
 		return 0;
 }
 
-static int qdio_inbound_q_done(struct qdio_q *q)
+static inline int qdio_inbound_q_done(struct qdio_q *q)
 {
 	unsigned char state = 0;
 
 	if (!atomic_read(&q->nr_buf_used))
 		return 1;
 
-	/*
-	 * We need that one for synchronization with the adapter, as it
-	 * does a kind of PCI avoidance.
-	 */
 	qdio_siga_sync_q(q);
-
 	get_buf_state(q, q->first_to_check, &state, 0);
+
 	if (state == SLSB_P_INPUT_PRIMED)
-		/* we got something to do */
+		/* more work coming */
 		return 0;
 
-	/* on VM, we don't poll, so the q is always done here */
-	if (need_siga_sync(q) || pci_out_supported(q))
+	if (is_thinint_irq(q->irq_ptr))
+		return 1;
+
+	/* don't poll under z/VM */
+	if (MACHINE_IS_VM)
 		return 1;
 
 	/*
@@ -563,14 +548,11 @@ static int qdio_inbound_q_done(struct qdio_q *q)
 		DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "in done:%3d",
 			      q->first_to_check);
 		return 1;
-	} else {
-		DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "in notd:%3d",
-			      q->first_to_check);
+	} else
 		return 0;
-	}
 }
 
-void qdio_kick_handler(struct qdio_q *q)
+static void qdio_kick_handler(struct qdio_q *q)
 {
 	int start = q->first_to_kick;
 	int end = q->first_to_check;
@@ -619,7 +601,6 @@ again:
 		goto again;
 }
 
-/* inbound tasklet */
 void qdio_inbound_processing(unsigned long data)
 {
 	struct qdio_q *q = (struct qdio_q *)data;
@@ -642,11 +623,6 @@ static int get_outbound_buffer_frontier(struct qdio_q *q)
 	count = min(atomic_read(&q->nr_buf_used), QDIO_MAX_BUFFERS_MASK);
 	stop = add_buf(q->first_to_check, count);
 
-	/* need to set count to 1 for non-qebsm */
-	if (!is_qebsm(q))
-		count = 1;
-
-check_next:
 	if (q->first_to_check == stop)
 		return q->first_to_check;
 
@@ -661,13 +637,7 @@ check_next:
 
 		atomic_sub(count, &q->nr_buf_used);
 		q->first_to_check = add_buf(q->first_to_check, count);
-		/*
-		 * We fetch all buffer states at once. get_buf_states may
-		 * return count < stop. For QEBSM we do not loop.
-		 */
-		if (is_qebsm(q))
-			break;
-		goto check_next;
+		break;
 	case SLSB_P_OUTPUT_ERROR:
 		announce_buffer_error(q, count);
 		/* process the buffer, the upper layer will take care of it */
@@ -797,8 +767,7 @@ void qdio_outbound_timer(unsigned long data)
 	tasklet_schedule(&q->tasklet);
 }
 
-/* called from thinint inbound tasklet */
-void qdio_check_outbound_after_thinint(struct qdio_q *q)
+static inline void qdio_check_outbound_after_thinint(struct qdio_q *q)
 {
 	struct qdio_q *out;
 	int i;
@@ -811,6 +780,46 @@ void qdio_check_outbound_after_thinint(struct qdio_q *q)
 			tasklet_schedule(&out->tasklet);
 }
 
+static void __tiqdio_inbound_processing(struct qdio_q *q)
+{
+	qdio_perf_stat_inc(&perf_stats.thinint_inbound);
+	qdio_sync_after_thinint(q);
+
+	/*
+	 * The interrupt could be caused by a PCI request. Check the
+	 * PCI capable outbound queues.
+	 */
+	qdio_check_outbound_after_thinint(q);
+
+	if (!qdio_inbound_q_moved(q))
+		return;
+
+	qdio_kick_handler(q);
+
+	if (!qdio_inbound_q_done(q)) {
+		qdio_perf_stat_inc(&perf_stats.thinint_inbound_loop);
+		if (likely(q->irq_ptr->state != QDIO_IRQ_STATE_STOPPED))
+			tasklet_schedule(&q->tasklet);
+	}
+
+	qdio_stop_polling(q);
+	/*
+	 * We need to check again to not lose initiative after
+	 * resetting the ACK state.
+	 */
+	if (!qdio_inbound_q_done(q)) {
+		qdio_perf_stat_inc(&perf_stats.thinint_inbound_loop2);
+		if (likely(q->irq_ptr->state != QDIO_IRQ_STATE_STOPPED))
+			tasklet_schedule(&q->tasklet);
+	}
+}
+
+void tiqdio_inbound_processing(unsigned long data)
+{
+	struct qdio_q *q = (struct qdio_q *)data;
+	__tiqdio_inbound_processing(q);
+}
+
 static inline void qdio_set_state(struct qdio_irq *irq_ptr,
 				  enum qdio_irq_states state)
 {
@@ -1488,18 +1497,13 @@ out:
  * @count: how many buffers to process
  */
 int do_QDIO(struct ccw_device *cdev, unsigned int callflags,
-	    int q_nr, int bufnr, int count)
+	    int q_nr, unsigned int bufnr, unsigned int count)
 {
 	struct qdio_irq *irq_ptr;
 
-	if ((bufnr > QDIO_MAX_BUFFERS_PER_Q) ||
-	    (count > QDIO_MAX_BUFFERS_PER_Q) ||
-	    (q_nr >= QDIO_MAX_QUEUES_PER_IRQ))
+	if (bufnr >= QDIO_MAX_BUFFERS_PER_Q || count > QDIO_MAX_BUFFERS_PER_Q)
 		return -EINVAL;
 
-	if (!count)
-		return 0;
-
 	irq_ptr = cdev->private->qdio_data;
 	if (!irq_ptr)
 		return -ENODEV;
diff --git a/drivers/s390/cio/qdio_thinint.c b/drivers/s390/cio/qdio_thinint.c
index c655d011a78..981a77ea7ee 100644
--- a/drivers/s390/cio/qdio_thinint.c
+++ b/drivers/s390/cio/qdio_thinint.c
@@ -43,9 +43,6 @@ struct indicator_t {
 };
 static struct indicator_t *q_indicators;
 
-static void tiqdio_tasklet_fn(unsigned long data);
-static DECLARE_TASKLET(tiqdio_tasklet, tiqdio_tasklet_fn, 0);
-
 static int css_qdio_omit_svs;
 
 static inline unsigned long do_clear_global_summary(void)
@@ -103,11 +100,6 @@ void tiqdio_add_input_queues(struct qdio_irq *irq_ptr)
 	xchg(irq_ptr->dsci, 1);
 }
 
-/*
- * we cannot stop the tiqdio tasklet here since it is for all
- * thinint qdio devices and it must run as long as there is a
- * thinint device left
- */
 void tiqdio_remove_input_queues(struct qdio_irq *irq_ptr)
 {
 	struct qdio_q *q;
@@ -126,79 +118,39 @@ void tiqdio_remove_input_queues(struct qdio_irq *irq_ptr)
 	}
 }
 
-static inline int tiqdio_inbound_q_done(struct qdio_q *q)
-{
-	unsigned char state = 0;
-
-	if (!atomic_read(&q->nr_buf_used))
-		return 1;
-
-	qdio_siga_sync_q(q);
-	get_buf_state(q, q->first_to_check, &state, 0);
-
-	if (state == SLSB_P_INPUT_PRIMED)
-		/* more work coming */
-		return 0;
-	return 1;
-}
-
 static inline int shared_ind(struct qdio_irq *irq_ptr)
 {
 	return irq_ptr->dsci == &q_indicators[TIQDIO_SHARED_IND].ind;
 }
 
-static void __tiqdio_inbound_processing(struct qdio_q *q)
+/**
+ * tiqdio_thinint_handler - thin interrupt handler for qdio
+ * @ind: pointer to adapter local summary indicator
+ * @drv_data: NULL
+ */
+static void tiqdio_thinint_handler(void *ind, void *drv_data)
 {
-	qdio_perf_stat_inc(&perf_stats.thinint_inbound);
-	qdio_sync_after_thinint(q);
+	struct qdio_q *q;
+
+	qdio_perf_stat_inc(&perf_stats.thin_int);
 
 	/*
-	 * Maybe we have work on our outbound queues... at least
-	 * we have to check the PCI capable queues.
+	 * SVS only when needed: issue SVS to benefit from iqdio interrupt
+	 * avoidance (SVS clears adapter interrupt suppression overwrite)
 	 */
-	qdio_check_outbound_after_thinint(q);
-
-	if (!qdio_inbound_q_moved(q))
-		return;
-
-	qdio_kick_handler(q);
-
-	if (!tiqdio_inbound_q_done(q)) {
-		qdio_perf_stat_inc(&perf_stats.thinint_inbound_loop);
-		if (likely(q->irq_ptr->state != QDIO_IRQ_STATE_STOPPED))
-			tasklet_schedule(&q->tasklet);
-	}
+	if (!css_qdio_omit_svs)
+		do_clear_global_summary();
 
-	qdio_stop_polling(q);
 	/*
-	 * We need to check again to not lose initiative after
-	 * resetting the ACK state.
+	 * reset local summary indicator (tiqdio_alsi) to stop adapter
+	 * interrupts for now
 	 */
-	if (!tiqdio_inbound_q_done(q)) {
-		qdio_perf_stat_inc(&perf_stats.thinint_inbound_loop2);
-		if (likely(q->irq_ptr->state != QDIO_IRQ_STATE_STOPPED))
-			tasklet_schedule(&q->tasklet);
-	}
-}
-
-void tiqdio_inbound_processing(unsigned long data)
-{
-	struct qdio_q *q = (struct qdio_q *)data;
-
-	__tiqdio_inbound_processing(q);
-}
-
-/* check for work on all inbound thinint queues */
-static void tiqdio_tasklet_fn(unsigned long data)
-{
-	struct qdio_q *q;
-
-	qdio_perf_stat_inc(&perf_stats.tasklet_thinint);
-again:
+	xchg((u8 *)ind, 0);
 
 	/* protect tiq_list entries, only changed in activate or shutdown */
 	rcu_read_lock();
 
+	/* check for work on all inbound thinint queues */
 	list_for_each_entry_rcu(q, &tiq_list, entry)
 		/* only process queues from changed sets */
 		if (*q->irq_ptr->dsci) {
@@ -226,37 +178,6 @@ again:
 		if (*tiqdio_alsi)
 			xchg(&q_indicators[TIQDIO_SHARED_IND].ind, 1);
 	}
-
-	/* check for more work */
-	if (*tiqdio_alsi) {
-		xchg(tiqdio_alsi, 0);
-		qdio_perf_stat_inc(&perf_stats.tasklet_thinint_loop);
-		goto again;
-	}
-}
-
-/**
- * tiqdio_thinint_handler - thin interrupt handler for qdio
- * @ind: pointer to adapter local summary indicator
- * @drv_data: NULL
- */
-static void tiqdio_thinint_handler(void *ind, void *drv_data)
-{
-	qdio_perf_stat_inc(&perf_stats.thin_int);
-
-	/*
-	 * SVS only when needed: issue SVS to benefit from iqdio interrupt
-	 * avoidance (SVS clears adapter interrupt suppression overwrite)
-	 */
-	if (!css_qdio_omit_svs)
-		do_clear_global_summary();
-
-	/*
-	 * reset local summary indicator (tiqdio_alsi) to stop adapter
-	 * interrupts for now, the tasklet will clean all dsci's
-	 */
-	xchg((u8 *)ind, 0);
-	tasklet_hi_schedule(&tiqdio_tasklet);
 }
 
 static int set_subchannel_ind(struct qdio_irq *irq_ptr, int reset)
@@ -376,5 +297,4 @@ void __exit tiqdio_unregister_thinints(void)
 		s390_unregister_adapter_interrupt(tiqdio_alsi, QDIO_AIRQ_ISC);
 		isc_unregister(QDIO_AIRQ_ISC);
 	}
-	tasklet_kill(&tiqdio_tasklet);
 }
diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c
index 9c148406b98..727a809636d 100644
--- a/drivers/s390/crypto/ap_bus.c
+++ b/drivers/s390/crypto/ap_bus.c
@@ -54,6 +54,12 @@ static int ap_poll_thread_start(void);
 static void ap_poll_thread_stop(void);
 static void ap_request_timeout(unsigned long);
 static inline void ap_schedule_poll_timer(void);
+static int __ap_poll_device(struct ap_device *ap_dev, unsigned long *flags);
+static int ap_device_remove(struct device *dev);
+static int ap_device_probe(struct device *dev);
+static void ap_interrupt_handler(void *unused1, void *unused2);
+static void ap_reset(struct ap_device *ap_dev);
+static void ap_config_timeout(unsigned long ptr);
 
 /*
  * Module description.
@@ -101,6 +107,10 @@ static struct hrtimer ap_poll_timer;
  * If z/VM change to 1500000 nanoseconds to adjust to z/VM polling.*/
 static unsigned long long poll_timeout = 250000;
 
+/* Suspend flag */
+static int ap_suspend_flag;
+static struct bus_type ap_bus_type;
+
 /**
  * ap_using_interrupts() - Returns non-zero if interrupt support is
  * available.
@@ -617,10 +627,79 @@ static int ap_uevent (struct device *dev, struct kobj_uevent_env *env)
 	return retval;
 }
 
+static int ap_bus_suspend(struct device *dev, pm_message_t state)
+{
+	struct ap_device *ap_dev = to_ap_dev(dev);
+	unsigned long flags;
+
+	if (!ap_suspend_flag) {
+		ap_suspend_flag = 1;
+
+		/* Disable scanning for devices, thus we do not want to scan
+		 * for them after removing.
+		 */
+		del_timer_sync(&ap_config_timer);
+		if (ap_work_queue != NULL) {
+			destroy_workqueue(ap_work_queue);
+			ap_work_queue = NULL;
+		}
+		tasklet_disable(&ap_tasklet);
+	}
+	/* Poll on the device until all requests are finished. */
+	do {
+		flags = 0;
+		__ap_poll_device(ap_dev, &flags);
+	} while ((flags & 1) || (flags & 2));
+
+	ap_device_remove(dev);
+	return 0;
+}
+
+static int ap_bus_resume(struct device *dev)
+{
+	int rc = 0;
+	struct ap_device *ap_dev = to_ap_dev(dev);
+
+	if (ap_suspend_flag) {
+		ap_suspend_flag = 0;
+		if (!ap_interrupts_available())
+			ap_interrupt_indicator = NULL;
+		ap_device_probe(dev);
+		ap_reset(ap_dev);
+		setup_timer(&ap_dev->timeout, ap_request_timeout,
+			    (unsigned long) ap_dev);
+		ap_scan_bus(NULL);
+		init_timer(&ap_config_timer);
+		ap_config_timer.function = ap_config_timeout;
+		ap_config_timer.data = 0;
+		ap_config_timer.expires = jiffies + ap_config_time * HZ;
+		add_timer(&ap_config_timer);
+		ap_work_queue = create_singlethread_workqueue("kapwork");
+		if (!ap_work_queue)
+			return -ENOMEM;
+		tasklet_enable(&ap_tasklet);
+		if (!ap_using_interrupts())
+			ap_schedule_poll_timer();
+		else
+			tasklet_schedule(&ap_tasklet);
+		if (ap_thread_flag)
+			rc = ap_poll_thread_start();
+	} else {
+		ap_device_probe(dev);
+		ap_reset(ap_dev);
+		setup_timer(&ap_dev->timeout, ap_request_timeout,
+			    (unsigned long) ap_dev);
+	}
+
+	return rc;
+}
+
 static struct bus_type ap_bus_type = {
 	.name = "ap",
 	.match = &ap_bus_match,
 	.uevent = &ap_uevent,
+	.suspend = ap_bus_suspend,
+	.resume = ap_bus_resume
 };
 
 static int ap_device_probe(struct device *dev)
@@ -1066,7 +1145,7 @@ ap_config_timeout(unsigned long ptr)
  */
 static inline void ap_schedule_poll_timer(void)
 {
-	if (ap_using_interrupts())
+	if (ap_using_interrupts() || ap_suspend_flag)
 		return;
 	if (hrtimer_is_queued(&ap_poll_timer))
 		return;
@@ -1384,6 +1463,8 @@ static int ap_poll_thread(void *data)
 
 	set_user_nice(current, 19);
 	while (1) {
+		if (ap_suspend_flag)
+			return 0;
 		if (need_resched()) {
 			schedule();
 			continue;
@@ -1414,7 +1495,7 @@ static int ap_poll_thread_start(void)
 {
 	int rc;
 
-	if (ap_using_interrupts())
+	if (ap_using_interrupts() || ap_suspend_flag)
 		return 0;
 	mutex_lock(&ap_poll_thread_mutex);
 	if (!ap_poll_kthread) {
diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c
index 52574ce797b..8c36eafcfbf 100644
--- a/drivers/s390/net/netiucv.c
+++ b/drivers/s390/net/netiucv.c
@@ -1307,7 +1307,7 @@ static void netiucv_pm_complete(struct device *dev)
  */
 static int netiucv_pm_freeze(struct device *dev)
 {
-	struct netiucv_priv *priv = dev->driver_data;
+	struct netiucv_priv *priv = dev_get_drvdata(dev);
 	struct net_device *ndev = NULL;
 	int rc = 0;
 
@@ -1331,7 +1331,7 @@ out:
  */
 static int netiucv_pm_restore_thaw(struct device *dev)
 {
-	struct netiucv_priv *priv = dev->driver_data;
+	struct netiucv_priv *priv = dev_get_drvdata(dev);
 	struct net_device *ndev = NULL;
 	int rc = 0;
 
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index 81d7f268418..691cecd03b8 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -655,7 +655,7 @@ static void qeth_l2_set_multicast_list(struct net_device *dev)
 	for (dm = dev->mc_list; dm; dm = dm->next)
 		qeth_l2_add_mc(card, dm->da_addr, 0);
 
-	list_for_each_entry(ha, &dev->uc_list, list)
+	list_for_each_entry(ha, &dev->uc.list, list)
 		qeth_l2_add_mc(card, ha->addr, 1);
 
 	spin_unlock_bh(&card->mclock);
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 6a19ed9a119..9c23122f755 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -258,10 +258,21 @@ config SCSI_SCAN_ASYNC
 	  or async on the kernel's command line.
 
 config SCSI_WAIT_SCAN
-	tristate
+	tristate  # No prompt here, this is an invisible symbol.
 	default m
 	depends on SCSI
 	depends on MODULES
+# scsi_wait_scan is a loadable module which waits until all the async scans are
+# complete.  The idea is to use it in initrd/ initramfs scripts.  You modprobe
+# it after all the modprobes of the root SCSI drivers and it will wait until
+# they have all finished scanning their buses before allowing the boot to
+# proceed.  (This method is not applicable if targets boot independently in
+# parallel with the initiator, or with transports with non-deterministic target
+# discovery schemes, or if a transport driver does not support scsi_wait_scan.)
+#
+# This symbol is not exposed as a prompt because little is to be gained by
+# disabling it, whereas people who accidentally switch it off may wonder why
+# their mkinitrd gets into trouble.
 
 menu "SCSI Transports"
 	depends on SCSI
diff --git a/drivers/scsi/bnx2i/Kconfig b/drivers/scsi/bnx2i/Kconfig
index b62b482e55e..1e9f7141102 100644
--- a/drivers/scsi/bnx2i/Kconfig
+++ b/drivers/scsi/bnx2i/Kconfig
@@ -1,6 +1,8 @@
 config SCSI_BNX2_ISCSI
 	tristate "Broadcom NetXtreme II iSCSI support"
 	select SCSI_ISCSI_ATTRS
+	select NETDEVICES
+	select NETDEV_1000
 	select CNIC
 	depends on PCI
 	---help---
diff --git a/drivers/scsi/cxgb3i/cxgb3i_ddp.c b/drivers/scsi/cxgb3i/cxgb3i_ddp.c
index 99c91254790..344fd53b995 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_ddp.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_ddp.c
@@ -206,6 +206,31 @@ int cxgb3i_ddp_find_page_index(unsigned long pgsz)
 	return DDP_PGIDX_MAX;
 }
 
+/**
+ * cxgb3i_ddp_adjust_page_table - adjust page table with PAGE_SIZE
+ * return the ddp page index, if no match is found return DDP_PGIDX_MAX.
+ */
+int cxgb3i_ddp_adjust_page_table(void)
+{
+	int i;
+	unsigned int base_order, order;
+
+	if (PAGE_SIZE < (1UL << ddp_page_shift[0])) {
+		ddp_log_info("PAGE_SIZE 0x%lx too small, min. 0x%lx.\n",
+				PAGE_SIZE, 1UL << ddp_page_shift[0]);
+		return -EINVAL;
+	}
+
+	base_order = get_order(1UL << ddp_page_shift[0]);
+	order = get_order(1 << PAGE_SHIFT);
+	for (i = 0; i < DDP_PGIDX_MAX; i++) {
+		/* first is the kernel page size, then just doubling the size */
+		ddp_page_order[i] = order - base_order + i;
+		ddp_page_shift[i] = PAGE_SHIFT + i;
+	}
+	return 0;
+}
+
 static inline void ddp_gl_unmap(struct pci_dev *pdev,
 				struct cxgb3i_gather_list *gl)
 {
@@ -598,30 +623,40 @@ int cxgb3i_adapter_ddp_info(struct t3cdev *tdev,
  * release all the resource held by the ddp pagepod manager for a given
  * adapter if needed
  */
-void cxgb3i_ddp_cleanup(struct t3cdev *tdev)
+
+static void ddp_cleanup(struct kref *kref)
 {
+	struct cxgb3i_ddp_info *ddp = container_of(kref,
+						struct cxgb3i_ddp_info,
+						refcnt);
 	int i = 0;
+
+	ddp_log_info("kref release ddp 0x%p, t3dev 0x%p.\n", ddp, ddp->tdev);
+
+	ddp->tdev->ulp_iscsi = NULL;
+	while (i < ddp->nppods) {
+		struct cxgb3i_gather_list *gl = ddp->gl_map[i];
+		if (gl) {
+			int npods = (gl->nelem + PPOD_PAGES_MAX - 1)
+					>> PPOD_PAGES_SHIFT;
+			ddp_log_info("t3dev 0x%p, ddp %d + %d.\n",
+					ddp->tdev, i, npods);
+			kfree(gl);
+			ddp_free_gl_skb(ddp, i, npods);
+			i += npods;
+		} else
+			i++;
+	}
+	cxgb3i_free_big_mem(ddp);
+}
+
+void cxgb3i_ddp_cleanup(struct t3cdev *tdev)
+{
 	struct cxgb3i_ddp_info *ddp = (struct cxgb3i_ddp_info *)tdev->ulp_iscsi;
 
 	ddp_log_info("t3dev 0x%p, release ddp 0x%p.\n", tdev, ddp);
-
-	if (ddp) {
-		tdev->ulp_iscsi = NULL;
-		while (i < ddp->nppods) {
-			struct cxgb3i_gather_list *gl = ddp->gl_map[i];
-			if (gl) {
-				int npods = (gl->nelem + PPOD_PAGES_MAX - 1)
-						>> PPOD_PAGES_SHIFT;
-				ddp_log_info("t3dev 0x%p, ddp %d + %d.\n",
-						tdev, i, npods);
-				kfree(gl);
-				ddp_free_gl_skb(ddp, i, npods);
-				i += npods;
-			} else
-				i++;
-		}
-		cxgb3i_free_big_mem(ddp);
-	}
+	if (ddp)
+		kref_put(&ddp->refcnt, ddp_cleanup);
 }
 
 /**
@@ -631,12 +666,13 @@ void cxgb3i_ddp_cleanup(struct t3cdev *tdev)
  */
 static void ddp_init(struct t3cdev *tdev)
 {
-	struct cxgb3i_ddp_info *ddp;
+	struct cxgb3i_ddp_info *ddp = tdev->ulp_iscsi;
 	struct ulp_iscsi_info uinfo;
 	unsigned int ppmax, bits;
 	int i, err;
 
-	if (tdev->ulp_iscsi) {
+	if (ddp) {
+		kref_get(&ddp->refcnt);
 		ddp_log_warn("t3dev 0x%p, ddp 0x%p already set up.\n",
 				tdev, tdev->ulp_iscsi);
 		return;
@@ -670,6 +706,7 @@ static void ddp_init(struct t3cdev *tdev)
 					  ppmax *
 					  sizeof(struct cxgb3i_gather_list *));
 	spin_lock_init(&ddp->map_lock);
+	kref_init(&ddp->refcnt);
 
 	ddp->tdev = tdev;
 	ddp->pdev = uinfo.pdev;
@@ -715,6 +752,17 @@ void cxgb3i_ddp_init(struct t3cdev *tdev)
 {
 	if (page_idx == DDP_PGIDX_MAX) {
 		page_idx = cxgb3i_ddp_find_page_index(PAGE_SIZE);
+
+		if (page_idx == DDP_PGIDX_MAX) {
+			ddp_log_info("system PAGE_SIZE %lu, update hw.\n",
+					PAGE_SIZE);
+			if (cxgb3i_ddp_adjust_page_table() < 0) {
+				ddp_log_info("PAGE_SIZE %lu, ddp disabled.\n",
+						PAGE_SIZE);
+				return;
+			}
+			page_idx = cxgb3i_ddp_find_page_index(PAGE_SIZE);
+		}
 		ddp_log_info("system PAGE_SIZE %lu, ddp idx %u.\n",
 				PAGE_SIZE, page_idx);
 	}
diff --git a/drivers/scsi/cxgb3i/cxgb3i_ddp.h b/drivers/scsi/cxgb3i/cxgb3i_ddp.h
index 0d296de7cf3..87dd56b422b 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_ddp.h
+++ b/drivers/scsi/cxgb3i/cxgb3i_ddp.h
@@ -54,6 +54,7 @@ struct cxgb3i_gather_list {
  * struct cxgb3i_ddp_info - cxgb3i direct data placement for pdu payload
  *
  * @list:	list head to link elements
+ * @refcnt:	ref. count
  * @tdev:	pointer to t3cdev used by cxgb3 driver
  * @max_txsz:	max tx packet size for ddp
  * @max_rxsz:	max rx packet size for ddp
@@ -70,6 +71,7 @@ struct cxgb3i_gather_list {
  */
 struct cxgb3i_ddp_info {
 	struct list_head list;
+	struct kref refcnt;
 	struct t3cdev *tdev;
 	struct pci_dev *pdev;
 	unsigned int max_txsz;
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index c15878e8815..0a5609bb581 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -45,8 +45,6 @@
 
 #include "fcoe.h"
 
-static int debug_fcoe;
-
 MODULE_AUTHOR("Open-FCoE.org");
 MODULE_DESCRIPTION("FCoE");
 MODULE_LICENSE("GPL v2");
@@ -305,23 +303,22 @@ static int fcoe_netdev_config(struct fc_lport *lp, struct net_device *netdev)
 #ifdef NETIF_F_FCOE_CRC
 	if (netdev->features & NETIF_F_FCOE_CRC) {
 		lp->crc_offload = 1;
-		printk(KERN_DEBUG "fcoe:%s supports FCCRC offload\n",
-		       netdev->name);
+		FCOE_NETDEV_DBG(netdev, "Supports FCCRC offload\n");
 	}
 #endif
 #ifdef NETIF_F_FSO
 	if (netdev->features & NETIF_F_FSO) {
 		lp->seq_offload = 1;
 		lp->lso_max = netdev->gso_max_size;
-		printk(KERN_DEBUG "fcoe:%s supports LSO for max len 0x%x\n",
-		       netdev->name, lp->lso_max);
+		FCOE_NETDEV_DBG(netdev, "Supports LSO for max len 0x%x\n",
+				lp->lso_max);
 	}
 #endif
 	if (netdev->fcoe_ddp_xid) {
 		lp->lro_enabled = 1;
 		lp->lro_xid = netdev->fcoe_ddp_xid;
-		printk(KERN_DEBUG "fcoe:%s supports LRO for max xid 0x%x\n",
-		       netdev->name, lp->lro_xid);
+		FCOE_NETDEV_DBG(netdev, "Supports LRO for max xid 0x%x\n",
+				lp->lro_xid);
 	}
 	skb_queue_head_init(&fc->fcoe_pending_queue);
 	fc->fcoe_pending_queue_active = 0;
@@ -407,7 +404,8 @@ static int fcoe_shost_config(struct fc_lport *lp, struct Scsi_Host *shost,
 	/* add the new host to the SCSI-ml */
 	rc = scsi_add_host(lp->host, dev);
 	if (rc) {
-		FC_DBG("fcoe_shost_config:error on scsi_add_host\n");
+		FCOE_NETDEV_DBG(fcoe_netdev(lp), "fcoe_shost_config: "
+				"error on scsi_add_host\n");
 		return rc;
 	}
 	sprintf(fc_host_symbolic_name(lp->host), "%s v%s over %s",
@@ -448,8 +446,7 @@ static int fcoe_if_destroy(struct net_device *netdev)
 
 	BUG_ON(!netdev);
 
-	printk(KERN_DEBUG "fcoe_if_destroy:interface on %s\n",
-	       netdev->name);
+	FCOE_NETDEV_DBG(netdev, "Destroying interface\n");
 
 	lp = fcoe_hostlist_lookup(netdev);
 	if (!lp)
@@ -560,8 +557,7 @@ static int fcoe_if_create(struct net_device *netdev)
 
 	BUG_ON(!netdev);
 
-	printk(KERN_DEBUG "fcoe_if_create:interface on %s\n",
-	       netdev->name);
+	FCOE_NETDEV_DBG(netdev, "Create Interface\n");
 
 	lp = fcoe_hostlist_lookup(netdev);
 	if (lp)
@@ -570,7 +566,7 @@ static int fcoe_if_create(struct net_device *netdev)
 	shost = libfc_host_alloc(&fcoe_shost_template,
 				 sizeof(struct fcoe_softc));
 	if (!shost) {
-		FC_DBG("Could not allocate host structure\n");
+		FCOE_NETDEV_DBG(netdev, "Could not allocate host structure\n");
 		return -ENOMEM;
 	}
 	lp = shost_priv(shost);
@@ -579,7 +575,8 @@ static int fcoe_if_create(struct net_device *netdev)
 	/* configure fc_lport, e.g., em */
 	rc = fcoe_lport_config(lp);
 	if (rc) {
-		FC_DBG("Could not configure lport\n");
+		FCOE_NETDEV_DBG(netdev, "Could not configure lport for the "
+				"interface\n");
 		goto out_host_put;
 	}
 
@@ -593,28 +590,32 @@ static int fcoe_if_create(struct net_device *netdev)
 	/* configure lport network properties */
 	rc = fcoe_netdev_config(lp, netdev);
 	if (rc) {
-		FC_DBG("Could not configure netdev for the interface\n");
+		FCOE_NETDEV_DBG(netdev, "Could not configure netdev for the "
+				"interface\n");
 		goto out_netdev_cleanup;
 	}
 
 	/* configure lport scsi host properties */
 	rc = fcoe_shost_config(lp, shost, &netdev->dev);
 	if (rc) {
-		FC_DBG("Could not configure shost for lport\n");
+		FCOE_NETDEV_DBG(netdev, "Could not configure shost for the "
+				"interface\n");
 		goto out_netdev_cleanup;
 	}
 
 	/* lport exch manager allocation */
 	rc = fcoe_em_config(lp);
 	if (rc) {
-		FC_DBG("Could not configure em for lport\n");
+		FCOE_NETDEV_DBG(netdev, "Could not configure the EM for the "
+				"interface\n");
 		goto out_netdev_cleanup;
 	}
 
 	/* Initialize the library */
 	rc = fcoe_libfc_config(lp, &fcoe_libfc_fcn_templ);
 	if (rc) {
-		FC_DBG("Could not configure libfc for lport!\n");
+		FCOE_NETDEV_DBG(netdev, "Could not configure libfc for the "
+				"interface\n");
 		goto out_lp_destroy;
 	}
 
@@ -653,7 +654,7 @@ static int __init fcoe_if_init(void)
 		fc_attach_transport(&fcoe_transport_function);
 
 	if (!scsi_transport_fcoe_sw) {
-		printk(KERN_ERR "fcoe_init:fc_attach_transport() failed\n");
+		printk(KERN_ERR "fcoe: Failed to attach to the FC transport\n");
 		return -ENODEV;
 	}
 
@@ -714,7 +715,7 @@ static void fcoe_percpu_thread_destroy(unsigned int cpu)
 	unsigned targ_cpu = smp_processor_id();
 #endif /* CONFIG_SMP */
 
-	printk(KERN_DEBUG "fcoe: Destroying receive thread for CPU %d\n", cpu);
+	FCOE_DBG("Destroying receive thread for CPU %d\n", cpu);
 
 	/* Prevent any new skbs from being queued for this CPU. */
 	p = &per_cpu(fcoe_percpu, cpu);
@@ -736,8 +737,8 @@ static void fcoe_percpu_thread_destroy(unsigned int cpu)
 		p0 = &per_cpu(fcoe_percpu, targ_cpu);
 		spin_lock_bh(&p0->fcoe_rx_list.lock);
 		if (p0->thread) {
-			FC_DBG("Moving frames from CPU %d to CPU %d\n",
-			       cpu, targ_cpu);
+			FCOE_DBG("Moving frames from CPU %d to CPU %d\n",
+				 cpu, targ_cpu);
 
 			while ((skb = __skb_dequeue(&p->fcoe_rx_list)) != NULL)
 				__skb_queue_tail(&p0->fcoe_rx_list, skb);
@@ -803,12 +804,12 @@ static int fcoe_cpu_callback(struct notifier_block *nfb,
 	switch (action) {
 	case CPU_ONLINE:
 	case CPU_ONLINE_FROZEN:
-		FC_DBG("CPU %x online: Create Rx thread\n", cpu);
+		FCOE_DBG("CPU %x online: Create Rx thread\n", cpu);
 		fcoe_percpu_thread_create(cpu);
 		break;
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
-		FC_DBG("CPU %x offline: Remove Rx thread\n", cpu);
+		FCOE_DBG("CPU %x offline: Remove Rx thread\n", cpu);
 		fcoe_percpu_thread_destroy(cpu);
 		break;
 	default:
@@ -846,24 +847,21 @@ int fcoe_rcv(struct sk_buff *skb, struct net_device *dev,
 	fc = container_of(ptype, struct fcoe_softc, fcoe_packet_type);
 	lp = fc->ctlr.lp;
 	if (unlikely(lp == NULL)) {
-		FC_DBG("cannot find hba structure");
+		FCOE_NETDEV_DBG(dev, "Cannot find hba structure");
 		goto err2;
 	}
 	if (!lp->link_up)
 		goto err2;
 
-	if (unlikely(debug_fcoe)) {
-		FC_DBG("skb_info: len:%d data_len:%d head:%p data:%p tail:%p "
-		       "end:%p sum:%d dev:%s", skb->len, skb->data_len,
-		       skb->head, skb->data, skb_tail_pointer(skb),
-		       skb_end_pointer(skb), skb->csum,
-		       skb->dev ? skb->dev->name : "<NULL>");
-
-	}
+	FCOE_NETDEV_DBG(dev, "skb_info: len:%d data_len:%d head:%p "
+			"data:%p tail:%p end:%p sum:%d dev:%s",
+			skb->len, skb->data_len, skb->head, skb->data,
+			skb_tail_pointer(skb), skb_end_pointer(skb),
+			skb->csum, skb->dev ? skb->dev->name : "<NULL>");
 
 	/* check for FCOE packet type */
 	if (unlikely(eth_hdr(skb)->h_proto != htons(ETH_P_FCOE))) {
-		FC_DBG("wrong FC type frame");
+		FCOE_NETDEV_DBG(dev, "Wrong FC type frame");
 		goto err;
 	}
 
@@ -901,8 +899,9 @@ int fcoe_rcv(struct sk_buff *skb, struct net_device *dev,
 		 * the first CPU now. For non-SMP systems this
 		 * will check the same CPU twice.
 		 */
-		FC_DBG("CPU is online, but no receive thread ready "
-		       "for incoming skb- using first online CPU.\n");
+		FCOE_NETDEV_DBG(dev, "CPU is online, but no receive thread "
+				"ready for incoming skb- using first online "
+				"CPU.\n");
 
 		spin_unlock_bh(&fps->fcoe_rx_list.lock);
 		cpu = first_cpu(cpu_online_map);
@@ -1201,19 +1200,17 @@ int fcoe_percpu_receive_thread(void *arg)
 		fr = fcoe_dev_from_skb(skb);
 		lp = fr->fr_dev;
 		if (unlikely(lp == NULL)) {
-			FC_DBG("invalid HBA Structure");
+			FCOE_NETDEV_DBG(skb->dev, "Invalid HBA Structure");
 			kfree_skb(skb);
 			continue;
 		}
 
-		if (unlikely(debug_fcoe)) {
-			FC_DBG("skb_info: len:%d data_len:%d head:%p data:%p "
-			       "tail:%p end:%p sum:%d dev:%s",
-			       skb->len, skb->data_len,
-			       skb->head, skb->data, skb_tail_pointer(skb),
-			       skb_end_pointer(skb), skb->csum,
-			       skb->dev ? skb->dev->name : "<NULL>");
-		}
+		FCOE_NETDEV_DBG(skb->dev, "skb_info: len:%d data_len:%d "
+				"head:%p data:%p tail:%p end:%p sum:%d dev:%s",
+				skb->len, skb->data_len,
+				skb->head, skb->data, skb_tail_pointer(skb),
+				skb_end_pointer(skb), skb->csum,
+				skb->dev ? skb->dev->name : "<NULL>");
 
 		/*
 		 * Save source MAC address before discarding header.
@@ -1233,7 +1230,7 @@ int fcoe_percpu_receive_thread(void *arg)
 		stats = fc_lport_get_stats(lp);
 		if (unlikely(FC_FCOE_DECAPS_VER(hp) != FC_FCOE_VER)) {
 			if (stats->ErrorFrames < 5)
-				printk(KERN_WARNING "FCoE version "
+				printk(KERN_WARNING "fcoe: FCoE version "
 				       "mismatch: The frame has "
 				       "version %x, but the "
 				       "initiator supports version "
@@ -1286,7 +1283,7 @@ int fcoe_percpu_receive_thread(void *arg)
 		if (fr_flags(fp) & FCPHF_CRC_UNCHECKED) {
 			if (le32_to_cpu(fr_crc(fp)) !=
 			    ~crc32(~0, skb->data, fr_len)) {
-				if (debug_fcoe || stats->InvalidCRCCount < 5)
+				if (stats->InvalidCRCCount < 5)
 					printk(KERN_WARNING "fcoe: dropping "
 					       "frame with CRC error\n");
 				stats->InvalidCRCCount++;
@@ -1432,7 +1429,8 @@ static int fcoe_device_notification(struct notifier_block *notifier,
 	case NETDEV_REGISTER:
 		break;
 	default:
-		FC_DBG("Unknown event %ld from netdev netlink\n", event);
+		FCOE_NETDEV_DBG(real_dev, "Unknown event %ld "
+				"from netdev netlink\n", event);
 	}
 	if (link_possible && !fcoe_link_ok(lp))
 		fcoe_ctlr_link_up(&fc->ctlr);
@@ -1505,8 +1503,8 @@ static int fcoe_ethdrv_get(const struct net_device *netdev)
 
 	owner = fcoe_netdev_to_module_owner(netdev);
 	if (owner) {
-		printk(KERN_DEBUG "fcoe:hold driver module %s for %s\n",
-		       module_name(owner), netdev->name);
+		FCOE_NETDEV_DBG(netdev, "Hold driver module %s\n",
+				module_name(owner));
 		return  try_module_get(owner);
 	}
 	return -ENODEV;
@@ -1527,8 +1525,8 @@ static int fcoe_ethdrv_put(const struct net_device *netdev)
 
 	owner = fcoe_netdev_to_module_owner(netdev);
 	if (owner) {
-		printk(KERN_DEBUG "fcoe:release driver module %s for %s\n",
-		       module_name(owner), netdev->name);
+		FCOE_NETDEV_DBG(netdev, "Release driver module %s\n",
+				module_name(owner));
 		module_put(owner);
 		return 0;
 	}
@@ -1559,7 +1557,7 @@ static int fcoe_destroy(const char *buffer, struct kernel_param *kp)
 	}
 	rc = fcoe_if_destroy(netdev);
 	if (rc) {
-		printk(KERN_ERR "fcoe: fcoe_if_destroy(%s) failed\n",
+		printk(KERN_ERR "fcoe: Failed to destroy interface (%s)\n",
 		       netdev->name);
 		rc = -EIO;
 		goto out_putdev;
@@ -1598,7 +1596,7 @@ static int fcoe_create(const char *buffer, struct kernel_param *kp)
 
 	rc = fcoe_if_create(netdev);
 	if (rc) {
-		printk(KERN_ERR "fcoe: fcoe_if_create(%s) failed\n",
+		printk(KERN_ERR "fcoe: Failed to create interface (%s)\n",
 		       netdev->name);
 		fcoe_ethdrv_put(netdev);
 		rc = -EIO;
diff --git a/drivers/scsi/fcoe/fcoe.h b/drivers/scsi/fcoe/fcoe.h
index a1eb8c1988b..0d724fa0898 100644
--- a/drivers/scsi/fcoe/fcoe.h
+++ b/drivers/scsi/fcoe/fcoe.h
@@ -40,6 +40,30 @@
 #define FCOE_MIN_XID		0x0001	/* the min xid supported by fcoe_sw */
 #define FCOE_MAX_XID		0x07ef	/* the max xid supported by fcoe_sw */
 
+unsigned int fcoe_debug_logging;
+module_param_named(debug_logging, fcoe_debug_logging, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(debug_logging, "a bit mask of logging levels");
+
+#define FCOE_LOGGING        0x01 /* General logging, not categorized */
+#define FCOE_NETDEV_LOGGING 0x02 /* Netdevice logging */
+
+#define FCOE_CHECK_LOGGING(LEVEL, CMD)					\
+do {                                                            	\
+	if (unlikely(fcoe_debug_logging & LEVEL))			\
+		do {							\
+			CMD;						\
+		} while (0);						\
+} while (0);
+
+#define FCOE_DBG(fmt, args...)						\
+	FCOE_CHECK_LOGGING(FCOE_LOGGING,				\
+			   printk(KERN_INFO "fcoe: " fmt, ##args);)
+
+#define FCOE_NETDEV_DBG(netdev, fmt, args...)			\
+	FCOE_CHECK_LOGGING(FCOE_NETDEV_LOGGING,			\
+			   printk(KERN_INFO "fcoe: %s" fmt,	\
+				  netdev->name, ##args);)
+
 /*
  * this percpu struct for fcoe
  */
diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c
index 2f5bc7fd3fa..f544340d318 100644
--- a/drivers/scsi/fcoe/libfcoe.c
+++ b/drivers/scsi/fcoe/libfcoe.c
@@ -56,15 +56,28 @@ static void fcoe_ctlr_recv_work(struct work_struct *);
 
 static u8 fcoe_all_fcfs[ETH_ALEN] = FIP_ALL_FCF_MACS;
 
-static u32 fcoe_ctlr_debug;	/* 1 for basic, 2 for noisy debug */
+unsigned int libfcoe_debug_logging;
+module_param_named(debug_logging, libfcoe_debug_logging, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(debug_logging, "a bit mask of logging levels");
 
-#define FIP_DBG_LVL(level, fmt, args...) 				\
+#define LIBFCOE_LOGGING     0x01 /* General logging, not categorized */
+#define LIBFCOE_FIP_LOGGING 0x02 /* FIP logging */
+
+#define LIBFCOE_CHECK_LOGGING(LEVEL, CMD)				\
+do {                                                            	\
+	if (unlikely(libfcoe_debug_logging & LEVEL))			\
 		do {							\
-			if (fcoe_ctlr_debug >= (level))			\
-				FC_DBG(fmt, ##args);			\
-		} while (0)
+			CMD;						\
+		} while (0);						\
+} while (0);
+
+#define LIBFCOE_DBG(fmt, args...)					\
+	LIBFCOE_CHECK_LOGGING(LIBFCOE_LOGGING,				\
+			      printk(KERN_INFO "libfcoe: " fmt, ##args);)
 
-#define FIP_DBG(fmt, args...)	FIP_DBG_LVL(1, fmt, ##args)
+#define LIBFCOE_FIP_DBG(fmt, args...)					\
+	LIBFCOE_CHECK_LOGGING(LIBFCOE_FIP_LOGGING,			\
+			      printk(KERN_INFO "fip: " fmt, ##args);)
 
 /*
  * Return non-zero if FCF fcoe_size has been validated.
@@ -243,7 +256,7 @@ void fcoe_ctlr_link_up(struct fcoe_ctlr *fip)
 		fip->last_link = 1;
 		fip->link = 1;
 		spin_unlock_bh(&fip->lock);
-		FIP_DBG("%s", "setting AUTO mode.\n");
+		LIBFCOE_FIP_DBG("%s", "setting AUTO mode.\n");
 		fc_linkup(fip->lp);
 		fcoe_ctlr_solicit(fip, NULL);
 	} else
@@ -614,7 +627,8 @@ static int fcoe_ctlr_parse_adv(struct sk_buff *skb, struct fcoe_fcf *fcf)
 			       ((struct fip_mac_desc *)desc)->fd_mac,
 			       ETH_ALEN);
 			if (!is_valid_ether_addr(fcf->fcf_mac)) {
-				FIP_DBG("invalid MAC addr in FIP adv\n");
+				LIBFCOE_FIP_DBG("Invalid MAC address "
+						"in FIP adv\n");
 				return -EINVAL;
 			}
 			break;
@@ -647,8 +661,8 @@ static int fcoe_ctlr_parse_adv(struct sk_buff *skb, struct fcoe_fcf *fcf)
 		case FIP_DT_LOGO:
 		case FIP_DT_ELP:
 		default:
-			FIP_DBG("unexpected descriptor type %x in FIP adv\n",
-				desc->fip_dtype);
+			LIBFCOE_FIP_DBG("unexpected descriptor type %x "
+					"in FIP adv\n", desc->fip_dtype);
 			/* standard says ignore unknown descriptors >= 128 */
 			if (desc->fip_dtype < FIP_DT_VENDOR_BASE)
 				return -EINVAL;
@@ -664,8 +678,8 @@ static int fcoe_ctlr_parse_adv(struct sk_buff *skb, struct fcoe_fcf *fcf)
 	return 0;
 
 len_err:
-	FIP_DBG("FIP length error in descriptor type %x len %zu\n",
-		desc->fip_dtype, dlen);
+	LIBFCOE_FIP_DBG("FIP length error in descriptor type %x len %zu\n",
+			desc->fip_dtype, dlen);
 	return -EINVAL;
 }
 
@@ -728,9 +742,10 @@ static void fcoe_ctlr_recv_adv(struct fcoe_ctlr *fip, struct sk_buff *skb)
 	}
 	mtu_valid = fcoe_ctlr_mtu_valid(fcf);
 	fcf->time = jiffies;
-	FIP_DBG_LVL(found ? 2 : 1, "%s FCF for fab %llx map %x val %d\n",
-		    found ? "old" : "new",
-		    fcf->fabric_name, fcf->fc_map, mtu_valid);
+	if (!found) {
+		LIBFCOE_FIP_DBG("New FCF for fab %llx map %x val %d\n",
+				fcf->fabric_name, fcf->fc_map, mtu_valid);
+	}
 
 	/*
 	 * If this advertisement is not solicited and our max receive size
@@ -807,7 +822,8 @@ static void fcoe_ctlr_recv_els(struct fcoe_ctlr *fip, struct sk_buff *skb)
 			       ((struct fip_mac_desc *)desc)->fd_mac,
 			       ETH_ALEN);
 			if (!is_valid_ether_addr(granted_mac)) {
-				FIP_DBG("invalid MAC addrs in FIP ELS\n");
+				LIBFCOE_FIP_DBG("Invalid MAC address "
+						"in FIP ELS\n");
 				goto drop;
 			}
 			break;
@@ -825,8 +841,8 @@ static void fcoe_ctlr_recv_els(struct fcoe_ctlr *fip, struct sk_buff *skb)
 			els_dtype = desc->fip_dtype;
 			break;
 		default:
-			FIP_DBG("unexpected descriptor type %x "
-				"in FIP adv\n", desc->fip_dtype);
+			LIBFCOE_FIP_DBG("unexpected descriptor type %x "
+					"in FIP adv\n", desc->fip_dtype);
 			/* standard says ignore unknown descriptors >= 128 */
 			if (desc->fip_dtype < FIP_DT_VENDOR_BASE)
 				goto drop;
@@ -867,8 +883,8 @@ static void fcoe_ctlr_recv_els(struct fcoe_ctlr *fip, struct sk_buff *skb)
 	return;
 
 len_err:
-	FIP_DBG("FIP length error in descriptor type %x len %zu\n",
-		desc->fip_dtype, dlen);
+	LIBFCOE_FIP_DBG("FIP length error in descriptor type %x len %zu\n",
+			desc->fip_dtype, dlen);
 drop:
 	kfree_skb(skb);
 }
@@ -894,7 +910,7 @@ static void fcoe_ctlr_recv_clr_vlink(struct fcoe_ctlr *fip,
 	struct fc_lport *lp = fip->lp;
 	u32	desc_mask;
 
-	FIP_DBG("Clear Virtual Link received\n");
+	LIBFCOE_FIP_DBG("Clear Virtual Link received\n");
 	if (!fcf)
 		return;
 	if (!fcf || !fc_host_port_id(lp->host))
@@ -952,9 +968,9 @@ static void fcoe_ctlr_recv_clr_vlink(struct fcoe_ctlr *fip,
 	 * reset only if all required descriptors were present and valid.
 	 */
 	if (desc_mask) {
-		FIP_DBG("missing descriptors mask %x\n", desc_mask);
+		LIBFCOE_FIP_DBG("missing descriptors mask %x\n", desc_mask);
 	} else {
-		FIP_DBG("performing Clear Virtual Link\n");
+		LIBFCOE_FIP_DBG("performing Clear Virtual Link\n");
 		fcoe_ctlr_reset(fip, FIP_ST_ENABLED);
 	}
 }
@@ -1002,10 +1018,6 @@ static int fcoe_ctlr_recv_handler(struct fcoe_ctlr *fip, struct sk_buff *skb)
 	op = ntohs(fiph->fip_op);
 	sub = fiph->fip_subcode;
 
-	FIP_DBG_LVL(2, "ver %x op %x/%x dl %x fl %x\n",
-		    FIP_VER_DECAPS(fiph->fip_ver), op, sub,
-		    ntohs(fiph->fip_dl_len), ntohs(fiph->fip_flags));
-
 	if (FIP_VER_DECAPS(fiph->fip_ver) != FIP_VER)
 		goto drop;
 	if (ntohs(fiph->fip_dl_len) * FIP_BPW + sizeof(*fiph) > skb->len)
@@ -1017,7 +1029,7 @@ static int fcoe_ctlr_recv_handler(struct fcoe_ctlr *fip, struct sk_buff *skb)
 		fip->map_dest = 0;
 		fip->state = FIP_ST_ENABLED;
 		state = FIP_ST_ENABLED;
-		FIP_DBG("using FIP mode\n");
+		LIBFCOE_FIP_DBG("Using FIP mode\n");
 	}
 	spin_unlock_bh(&fip->lock);
 	if (state != FIP_ST_ENABLED)
@@ -1052,14 +1064,15 @@ static void fcoe_ctlr_select(struct fcoe_ctlr *fip)
 	struct fcoe_fcf *best = NULL;
 
 	list_for_each_entry(fcf, &fip->fcfs, list) {
-		FIP_DBG("consider FCF for fab %llx VFID %d map %x val %d\n",
-			fcf->fabric_name, fcf->vfid,
-			fcf->fc_map, fcoe_ctlr_mtu_valid(fcf));
+		LIBFCOE_FIP_DBG("consider FCF for fab %llx VFID %d map %x "
+				"val %d\n", fcf->fabric_name, fcf->vfid,
+				fcf->fc_map, fcoe_ctlr_mtu_valid(fcf));
 		if (!fcoe_ctlr_fcf_usable(fcf)) {
-			FIP_DBG("FCF for fab %llx map %x %svalid %savailable\n",
-				fcf->fabric_name, fcf->fc_map,
-				(fcf->flags & FIP_FL_SOL) ? "" : "in",
-				(fcf->flags & FIP_FL_AVAIL) ? "" : "un");
+			LIBFCOE_FIP_DBG("FCF for fab %llx map %x %svalid "
+					"%savailable\n", fcf->fabric_name,
+					fcf->fc_map, (fcf->flags & FIP_FL_SOL)
+					? "" : "in", (fcf->flags & FIP_FL_AVAIL)
+					? "" : "un");
 			continue;
 		}
 		if (!best) {
@@ -1069,7 +1082,8 @@ static void fcoe_ctlr_select(struct fcoe_ctlr *fip)
 		if (fcf->fabric_name != best->fabric_name ||
 		    fcf->vfid != best->vfid ||
 		    fcf->fc_map != best->fc_map) {
-			FIP_DBG("conflicting fabric, VFID, or FC-MAP\n");
+			LIBFCOE_FIP_DBG("Conflicting fabric, VFID, "
+					"or FC-MAP\n");
 			return;
 		}
 		if (fcf->pri < best->pri)
@@ -1113,7 +1127,7 @@ static void fcoe_ctlr_timeout(unsigned long arg)
 	if (sel != fcf) {
 		fcf = sel;		/* the old FCF may have been freed */
 		if (sel) {
-			printk(KERN_INFO "host%d: FIP selected "
+			printk(KERN_INFO "libfcoe: host%d: FIP selected "
 			       "Fibre-Channel Forwarder MAC %s\n",
 			       fip->lp->host->host_no,
 			       print_mac(buf, sel->fcf_mac));
@@ -1123,7 +1137,7 @@ static void fcoe_ctlr_timeout(unsigned long arg)
 			fip->ctlr_ka_time = jiffies + sel->fka_period;
 			fip->link = 1;
 		} else {
-			printk(KERN_NOTICE "host%d: "
+			printk(KERN_NOTICE "libfcoe: host%d: "
 			       "FIP Fibre-Channel Forwarder timed out.  "
 			       "Starting FCF discovery.\n",
 			       fip->lp->host->host_no);
@@ -1247,7 +1261,7 @@ int fcoe_ctlr_recv_flogi(struct fcoe_ctlr *fip, struct fc_frame *fp, u8 *sa)
 			return -EINVAL;
 		}
 		fip->state = FIP_ST_NON_FIP;
-		FIP_DBG("received FLOGI LS_ACC using non-FIP mode\n");
+		LIBFCOE_FIP_DBG("received FLOGI LS_ACC using non-FIP mode\n");
 
 		/*
 		 * FLOGI accepted.
@@ -1276,7 +1290,7 @@ int fcoe_ctlr_recv_flogi(struct fcoe_ctlr *fip, struct fc_frame *fp, u8 *sa)
 			memcpy(fip->dest_addr, sa, ETH_ALEN);
 			fip->map_dest = 0;
 			if (fip->state == FIP_ST_NON_FIP)
-				FIP_DBG("received FLOGI REQ, "
+				LIBFCOE_FIP_DBG("received FLOGI REQ, "
 						"using non-FIP mode\n");
 			fip->state = FIP_ST_NON_FIP;
 		}
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index 89d41a424b3..5fd2da494d0 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -40,7 +40,7 @@
 #include "scsi_logging.h"
 
 
-static int scsi_host_next_hn;		/* host_no for next new host */
+static atomic_t scsi_host_next_hn;	/* host_no for next new host */
 
 
 static void scsi_host_cls_release(struct device *dev)
@@ -333,7 +333,11 @@ struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize)
 
 	mutex_init(&shost->scan_mutex);
 
-	shost->host_no = scsi_host_next_hn++; /* XXX(hch): still racy */
+	/*
+	 * subtract one because we increment first then return, but we need to
+	 * know what the next host number was before increment
+	 */
+	shost->host_no = atomic_inc_return(&scsi_host_next_hn) - 1;
 	shost->dma_channel = 0xff;
 
 	/* These three are default values which can be overridden */
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index b4b805e8d7d..166d96450a0 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -2254,10 +2254,13 @@ static void ibmvfc_handle_async(struct ibmvfc_async_crq *crq,
 				continue;
 			if (crq->node_name && tgt->ids.node_name != crq->node_name)
 				continue;
-			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+			if (tgt->need_login && crq->event == IBMVFC_AE_ELS_LOGO)
+				tgt->logo_rcvd = 1;
+			if (!tgt->need_login || crq->event == IBMVFC_AE_ELS_PLOGI) {
+				ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+				ibmvfc_reinit_host(vhost);
+			}
 		}
-
-		ibmvfc_reinit_host(vhost);
 		break;
 	case IBMVFC_AE_LINK_DOWN:
 	case IBMVFC_AE_ADAPTER_FAILED:
@@ -2783,27 +2786,27 @@ static void ibmvfc_tasklet(void *data)
 
 	spin_lock_irqsave(vhost->host->host_lock, flags);
 	while (!done) {
-		/* Pull all the valid messages off the CRQ */
-		while ((crq = ibmvfc_next_crq(vhost)) != NULL) {
-			ibmvfc_handle_crq(crq, vhost);
-			crq->valid = 0;
-		}
-
 		/* Pull all the valid messages off the async CRQ */
 		while ((async = ibmvfc_next_async_crq(vhost)) != NULL) {
 			ibmvfc_handle_async(async, vhost);
 			async->valid = 0;
 		}
 
-		vio_enable_interrupts(vdev);
-		if ((crq = ibmvfc_next_crq(vhost)) != NULL) {
-			vio_disable_interrupts(vdev);
+		/* Pull all the valid messages off the CRQ */
+		while ((crq = ibmvfc_next_crq(vhost)) != NULL) {
 			ibmvfc_handle_crq(crq, vhost);
 			crq->valid = 0;
-		} else if ((async = ibmvfc_next_async_crq(vhost)) != NULL) {
+		}
+
+		vio_enable_interrupts(vdev);
+		if ((async = ibmvfc_next_async_crq(vhost)) != NULL) {
 			vio_disable_interrupts(vdev);
 			ibmvfc_handle_async(async, vhost);
 			async->valid = 0;
+		} else if ((crq = ibmvfc_next_crq(vhost)) != NULL) {
+			vio_disable_interrupts(vdev);
+			ibmvfc_handle_crq(crq, vhost);
+			crq->valid = 0;
 		} else
 			done = 1;
 	}
@@ -2927,7 +2930,11 @@ static void ibmvfc_tgt_prli_done(struct ibmvfc_event *evt)
 		break;
 	case IBMVFC_MAD_FAILED:
 	default:
-		if (ibmvfc_retry_cmd(rsp->status, rsp->error))
+		if ((rsp->status & IBMVFC_VIOS_FAILURE) && rsp->error == IBMVFC_PLOGI_REQUIRED)
+			level += ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_send_plogi);
+		else if (tgt->logo_rcvd)
+			level += ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_send_plogi);
+		else if (ibmvfc_retry_cmd(rsp->status, rsp->error))
 			level += ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_send_prli);
 		else
 			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
@@ -3054,6 +3061,7 @@ static void ibmvfc_tgt_send_plogi(struct ibmvfc_target *tgt)
 		return;
 
 	kref_get(&tgt->kref);
+	tgt->logo_rcvd = 0;
 	evt = ibmvfc_get_event(vhost);
 	vhost->discovery_threads++;
 	ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_INIT_WAIT);
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index c2668d7d67f..007fa1c9ef1 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -605,6 +605,7 @@ struct ibmvfc_target {
 	int need_login;
 	int add_rport;
 	int init_retries;
+	int logo_rcvd;
 	u32 cancel_key;
 	struct ibmvfc_service_parms service_parms;
 	struct ibmvfc_service_parms service_parms_change;
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 0f8bc772b11..5f045505a1f 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -131,13 +131,13 @@ static const struct ipr_chip_cfg_t ipr_chip_cfg[] = {
 };
 
 static const struct ipr_chip_t ipr_chip[] = {
-	{ PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE, &ipr_chip_cfg[0] },
-	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, &ipr_chip_cfg[0] },
-	{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN, &ipr_chip_cfg[0] },
-	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN, &ipr_chip_cfg[0] },
-	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E, &ipr_chip_cfg[0] },
-	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_SNIPE, &ipr_chip_cfg[1] },
-	{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP, &ipr_chip_cfg[1] }
+	{ PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE, IPR_USE_LSI, &ipr_chip_cfg[0] },
+	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, IPR_USE_LSI, &ipr_chip_cfg[0] },
+	{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN, IPR_USE_LSI, &ipr_chip_cfg[0] },
+	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN, IPR_USE_LSI, &ipr_chip_cfg[0] },
+	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E, IPR_USE_MSI, &ipr_chip_cfg[0] },
+	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_SNIPE, IPR_USE_LSI, &ipr_chip_cfg[1] },
+	{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP, IPR_USE_LSI, &ipr_chip_cfg[1] }
 };
 
 static int ipr_max_bus_speeds [] = {
@@ -7367,6 +7367,7 @@ static void __devinit ipr_init_ioa_cfg(struct ipr_ioa_cfg *ioa_cfg,
 	INIT_LIST_HEAD(&ioa_cfg->used_res_q);
 	INIT_WORK(&ioa_cfg->work_q, ipr_worker_thread);
 	init_waitqueue_head(&ioa_cfg->reset_wait_q);
+	init_waitqueue_head(&ioa_cfg->msi_wait_q);
 	ioa_cfg->sdt_state = INACTIVE;
 	if (ipr_enable_cache)
 		ioa_cfg->cache_state = CACHE_ENABLED;
@@ -7398,25 +7399,108 @@ static void __devinit ipr_init_ioa_cfg(struct ipr_ioa_cfg *ioa_cfg,
 }
 
 /**
- * ipr_get_chip_cfg - Find adapter chip configuration
+ * ipr_get_chip_info - Find adapter chip information
  * @dev_id:		PCI device id struct
  *
  * Return value:
- * 	ptr to chip config on success / NULL on failure
+ * 	ptr to chip information on success / NULL on failure
  **/
-static const struct ipr_chip_cfg_t * __devinit
-ipr_get_chip_cfg(const struct pci_device_id *dev_id)
+static const struct ipr_chip_t * __devinit
+ipr_get_chip_info(const struct pci_device_id *dev_id)
 {
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(ipr_chip); i++)
 		if (ipr_chip[i].vendor == dev_id->vendor &&
 		    ipr_chip[i].device == dev_id->device)
-			return ipr_chip[i].cfg;
+			return &ipr_chip[i];
 	return NULL;
 }
 
 /**
+ * ipr_test_intr - Handle the interrupt generated in ipr_test_msi().
+ * @pdev:		PCI device struct
+ *
+ * Description: Simply set the msi_received flag to 1 indicating that
+ * Message Signaled Interrupts are supported.
+ *
+ * Return value:
+ * 	0 on success / non-zero on failure
+ **/
+static irqreturn_t __devinit ipr_test_intr(int irq, void *devp)
+{
+	struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)devp;
+	unsigned long lock_flags = 0;
+	irqreturn_t rc = IRQ_HANDLED;
+
+	spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
+
+	ioa_cfg->msi_received = 1;
+	wake_up(&ioa_cfg->msi_wait_q);
+
+	spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
+	return rc;
+}
+
+/**
+ * ipr_test_msi - Test for Message Signaled Interrupt (MSI) support.
+ * @pdev:		PCI device struct
+ *
+ * Description: The return value from pci_enable_msi() can not always be
+ * trusted.  This routine sets up and initiates a test interrupt to determine
+ * if the interrupt is received via the ipr_test_intr() service routine.
+ * If the tests fails, the driver will fall back to LSI.
+ *
+ * Return value:
+ * 	0 on success / non-zero on failure
+ **/
+static int __devinit ipr_test_msi(struct ipr_ioa_cfg *ioa_cfg,
+				  struct pci_dev *pdev)
+{
+	int rc;
+	volatile u32 int_reg;
+	unsigned long lock_flags = 0;
+
+	ENTER;
+
+	spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
+	init_waitqueue_head(&ioa_cfg->msi_wait_q);
+	ioa_cfg->msi_received = 0;
+	ipr_mask_and_clear_interrupts(ioa_cfg, ~IPR_PCII_IOA_TRANS_TO_OPER);
+	writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE, ioa_cfg->regs.clr_interrupt_mask_reg);
+	int_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
+	spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
+
+	rc = request_irq(pdev->irq, ipr_test_intr, 0, IPR_NAME, ioa_cfg);
+	if (rc) {
+		dev_err(&pdev->dev, "Can not assign irq %d\n", pdev->irq);
+		return rc;
+	} else if (ipr_debug)
+		dev_info(&pdev->dev, "IRQ assigned: %d\n", pdev->irq);
+
+	writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE, ioa_cfg->regs.sense_interrupt_reg);
+	int_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
+	wait_event_timeout(ioa_cfg->msi_wait_q, ioa_cfg->msi_received, HZ);
+	ipr_mask_and_clear_interrupts(ioa_cfg, ~IPR_PCII_IOA_TRANS_TO_OPER);
+
+	spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
+	if (!ioa_cfg->msi_received) {
+		/* MSI test failed */
+		dev_info(&pdev->dev, "MSI test failed.  Falling back to LSI.\n");
+		rc = -EOPNOTSUPP;
+	} else if (ipr_debug)
+		dev_info(&pdev->dev, "MSI test succeeded.\n");
+
+	spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
+
+	free_irq(pdev->irq, ioa_cfg);
+
+	LEAVE;
+
+	return rc;
+}
+
+/**
  * ipr_probe_ioa - Allocates memory and does first stage of initialization
  * @pdev:		PCI device struct
  * @dev_id:		PCI device id struct
@@ -7441,11 +7525,6 @@ static int __devinit ipr_probe_ioa(struct pci_dev *pdev,
 		goto out;
 	}
 
-	if (!(rc = pci_enable_msi(pdev)))
-		dev_info(&pdev->dev, "MSI enabled\n");
-	else if (ipr_debug)
-		dev_info(&pdev->dev, "Cannot enable MSI\n");
-
 	dev_info(&pdev->dev, "Found IOA with IRQ: %d\n", pdev->irq);
 
 	host = scsi_host_alloc(&driver_template, sizeof(*ioa_cfg));
@@ -7461,14 +7540,16 @@ static int __devinit ipr_probe_ioa(struct pci_dev *pdev,
 	ata_host_init(&ioa_cfg->ata_host, &pdev->dev,
 		      sata_port_info.flags, &ipr_sata_ops);
 
-	ioa_cfg->chip_cfg = ipr_get_chip_cfg(dev_id);
+	ioa_cfg->ipr_chip = ipr_get_chip_info(dev_id);
 
-	if (!ioa_cfg->chip_cfg) {
+	if (!ioa_cfg->ipr_chip) {
 		dev_err(&pdev->dev, "Unknown adapter chipset 0x%04X 0x%04X\n",
 			dev_id->vendor, dev_id->device);
 		goto out_scsi_host_put;
 	}
 
+	ioa_cfg->chip_cfg = ioa_cfg->ipr_chip->cfg;
+
 	if (ipr_transop_timeout)
 		ioa_cfg->transop_timeout = ipr_transop_timeout;
 	else if (dev_id->driver_data & IPR_USE_LONG_TRANSOP_TIMEOUT)
@@ -7519,6 +7600,18 @@ static int __devinit ipr_probe_ioa(struct pci_dev *pdev,
 		goto cleanup_nomem;
 	}
 
+	/* Enable MSI style interrupts if they are supported. */
+	if (ioa_cfg->ipr_chip->intr_type == IPR_USE_MSI && !pci_enable_msi(pdev)) {
+		rc = ipr_test_msi(ioa_cfg, pdev);
+		if (rc == -EOPNOTSUPP)
+			pci_disable_msi(pdev);
+		else if (rc)
+			goto out_msi_disable;
+		else
+			dev_info(&pdev->dev, "MSI enabled with IRQ: %d\n", pdev->irq);
+	} else if (ipr_debug)
+		dev_info(&pdev->dev, "Cannot enable MSI.\n");
+
 	/* Save away PCI config space for use following IOA reset */
 	rc = pci_save_state(pdev);
 
@@ -7556,7 +7649,9 @@ static int __devinit ipr_probe_ioa(struct pci_dev *pdev,
 		ioa_cfg->ioa_unit_checked = 1;
 
 	ipr_mask_and_clear_interrupts(ioa_cfg, ~IPR_PCII_IOA_TRANS_TO_OPER);
-	rc = request_irq(pdev->irq, ipr_isr, IRQF_SHARED, IPR_NAME, ioa_cfg);
+	rc = request_irq(pdev->irq, ipr_isr,
+			 ioa_cfg->msi_received ? 0 : IRQF_SHARED,
+			 IPR_NAME, ioa_cfg);
 
 	if (rc) {
 		dev_err(&pdev->dev, "Couldn't register IRQ %d! rc=%d\n",
@@ -7583,12 +7678,13 @@ cleanup_nolog:
 	ipr_free_mem(ioa_cfg);
 cleanup_nomem:
 	iounmap(ipr_regs);
+out_msi_disable:
+	pci_disable_msi(pdev);
 out_release_regions:
 	pci_release_regions(pdev);
 out_scsi_host_put:
 	scsi_host_put(host);
 out_disable:
-	pci_disable_msi(pdev);
 	pci_disable_device(pdev);
 	goto out;
 }
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index 79a3ae4fb2c..4b63dd6b1c8 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -37,8 +37,8 @@
 /*
  * Literals
  */
-#define IPR_DRIVER_VERSION "2.4.2"
-#define IPR_DRIVER_DATE "(January 21, 2009)"
+#define IPR_DRIVER_VERSION "2.4.3"
+#define IPR_DRIVER_DATE "(June 10, 2009)"
 
 /*
  * IPR_MAX_CMD_PER_LUN: This defines the maximum number of outstanding
@@ -1025,6 +1025,9 @@ struct ipr_chip_cfg_t {
 struct ipr_chip_t {
 	u16 vendor;
 	u16 device;
+	u16 intr_type;
+#define IPR_USE_LSI			0x00
+#define IPR_USE_MSI			0x01
 	const struct ipr_chip_cfg_t *cfg;
 };
 
@@ -1094,6 +1097,7 @@ struct ipr_ioa_cfg {
 	u8 needs_hard_reset:1;
 	u8 dual_raid:1;
 	u8 needs_warm_reset:1;
+	u8 msi_received:1;
 
 	u8 revid;
 
@@ -1159,6 +1163,7 @@ struct ipr_ioa_cfg {
 
 	unsigned int transop_timeout;
 	const struct ipr_chip_cfg_t *chip_cfg;
+	const struct ipr_chip_t *ipr_chip;
 
 	void __iomem *hdw_dma_regs;	/* iomapped PCI memory space */
 	unsigned long hdw_dma_regs_pci;	/* raw PCI memory space */
@@ -1179,6 +1184,7 @@ struct ipr_ioa_cfg {
 	struct work_struct work_q;
 
 	wait_queue_head_t reset_wait_q;
+	wait_queue_head_t msi_wait_q;
 
 	struct ipr_dump *dump;
 	enum ipr_sdt_state sdt_state;
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index b7c092d63bb..518dbd91df8 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -253,8 +253,6 @@ static int iscsi_sw_tcp_xmit_segment(struct iscsi_tcp_conn *tcp_conn,
 
 		if (r < 0) {
 			iscsi_tcp_segment_unmap(segment);
-			if (copied || r == -EAGAIN)
-				break;
 			return r;
 		}
 		copied += r;
@@ -275,11 +273,17 @@ static int iscsi_sw_tcp_xmit(struct iscsi_conn *conn)
 
 	while (1) {
 		rc = iscsi_sw_tcp_xmit_segment(tcp_conn, segment);
-		if (rc < 0) {
+		/*
+		 * We may not have been able to send data because the conn
+		 * is getting stopped. libiscsi will know so propogate err
+		 * for it to do the right thing.
+		 */
+		if (rc == -EAGAIN)
+			return rc;
+		else if (rc < 0) {
 			rc = ISCSI_ERR_XMIT_FAILED;
 			goto error;
-		}
-		if (rc == 0)
+		} else if (rc == 0)
 			break;
 
 		consumed += rc;
diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c
index 4c880656990..6fabf66972b 100644
--- a/drivers/scsi/libfc/fc_disc.c
+++ b/drivers/scsi/libfc/fc_disc.c
@@ -45,14 +45,6 @@
 
 #define	FC_DISC_DELAY		3
 
-static int fc_disc_debug;
-
-#define FC_DEBUG_DISC(fmt...)			\
-	do {					\
-		if (fc_disc_debug)		\
-			FC_DBG(fmt);		\
-	} while (0)
-
 static void fc_disc_gpn_ft_req(struct fc_disc *);
 static void fc_disc_gpn_ft_resp(struct fc_seq *, struct fc_frame *, void *);
 static int fc_disc_new_target(struct fc_disc *, struct fc_rport *,
@@ -137,8 +129,8 @@ static void fc_disc_rport_callback(struct fc_lport *lport,
 	struct fc_rport_libfc_priv *rdata = rport->dd_data;
 	struct fc_disc *disc = &lport->disc;
 
-	FC_DEBUG_DISC("Received a %d event for port (%6x)\n", event,
-		      rport->port_id);
+	FC_DISC_DBG(disc, "Received a %d event for port (%6x)\n", event,
+		    rport->port_id);
 
 	switch (event) {
 	case RPORT_EV_CREATED:
@@ -191,8 +183,7 @@ static void fc_disc_recv_rscn_req(struct fc_seq *sp, struct fc_frame *fp,
 
 	lport = disc->lport;
 
-	FC_DEBUG_DISC("Received an RSCN event on port (%6x)\n",
-		      fc_host_port_id(lport->host));
+	FC_DISC_DBG(disc, "Received an RSCN event\n");
 
 	/* make sure the frame contains an RSCN message */
 	rp = fc_frame_payload_get(fp, sizeof(*rp));
@@ -225,8 +216,8 @@ static void fc_disc_recv_rscn_req(struct fc_seq *sp, struct fc_frame *fp,
 		 */
 		switch (fmt) {
 		case ELS_ADDR_FMT_PORT:
-			FC_DEBUG_DISC("Port address format for port (%6x)\n",
-				      ntoh24(pp->rscn_fid));
+			FC_DISC_DBG(disc, "Port address format for port "
+				    "(%6x)\n", ntoh24(pp->rscn_fid));
 			dp = kzalloc(sizeof(*dp), GFP_KERNEL);
 			if (!dp) {
 				redisc = 1;
@@ -243,19 +234,19 @@ static void fc_disc_recv_rscn_req(struct fc_seq *sp, struct fc_frame *fp,
 		case ELS_ADDR_FMT_DOM:
 		case ELS_ADDR_FMT_FAB:
 		default:
-			FC_DEBUG_DISC("Address format is (%d)\n", fmt);
+			FC_DISC_DBG(disc, "Address format is (%d)\n", fmt);
 			redisc = 1;
 			break;
 		}
 	}
 	lport->tt.seq_els_rsp_send(sp, ELS_LS_ACC, NULL);
 	if (redisc) {
-		FC_DEBUG_DISC("RSCN received: rediscovering\n");
+		FC_DISC_DBG(disc, "RSCN received: rediscovering\n");
 		fc_disc_restart(disc);
 	} else {
-		FC_DEBUG_DISC("RSCN received: not rediscovering. "
-			      "redisc %d state %d in_prog %d\n",
-			      redisc, lport->state, disc->pending);
+		FC_DISC_DBG(disc, "RSCN received: not rediscovering. "
+			    "redisc %d state %d in_prog %d\n",
+			    redisc, lport->state, disc->pending);
 		list_for_each_entry_safe(dp, next, &disc_ports, peers) {
 			list_del(&dp->peers);
 			rport = lport->tt.rport_lookup(lport, dp->ids.port_id);
@@ -270,7 +261,7 @@ static void fc_disc_recv_rscn_req(struct fc_seq *sp, struct fc_frame *fp,
 	fc_frame_free(fp);
 	return;
 reject:
-	FC_DEBUG_DISC("Received a bad RSCN frame\n");
+	FC_DISC_DBG(disc, "Received a bad RSCN frame\n");
 	rjt_data.fp = NULL;
 	rjt_data.reason = ELS_RJT_LOGIC;
 	rjt_data.explan = ELS_EXPL_NONE;
@@ -302,7 +293,8 @@ static void fc_disc_recv_req(struct fc_seq *sp, struct fc_frame *fp,
 		mutex_unlock(&disc->disc_mutex);
 		break;
 	default:
-		FC_DBG("Received an unsupported request. opcode (%x)\n", op);
+		FC_DISC_DBG(disc, "Received an unsupported request, "
+			    "the opcode is (%x)\n", op);
 		break;
 	}
 }
@@ -320,12 +312,10 @@ static void fc_disc_restart(struct fc_disc *disc)
 	struct fc_rport_libfc_priv *rdata, *next;
 	struct fc_lport *lport = disc->lport;
 
-	FC_DEBUG_DISC("Restarting discovery for port (%6x)\n",
-		      fc_host_port_id(lport->host));
+	FC_DISC_DBG(disc, "Restarting discovery\n");
 
 	list_for_each_entry_safe(rdata, next, &disc->rports, peers) {
 		rport = PRIV_TO_RPORT(rdata);
-		FC_DEBUG_DISC("list_del(%6x)\n", rport->port_id);
 		list_del(&rdata->peers);
 		lport->tt.rport_logoff(rport);
 	}
@@ -485,8 +475,7 @@ static void fc_disc_done(struct fc_disc *disc)
 	struct fc_lport *lport = disc->lport;
 	enum fc_disc_event event;
 
-	FC_DEBUG_DISC("Discovery complete for port (%6x)\n",
-		      fc_host_port_id(lport->host));
+	FC_DISC_DBG(disc, "Discovery complete\n");
 
 	event = disc->event;
 	disc->event = DISC_EV_NONE;
@@ -510,10 +499,10 @@ static void fc_disc_error(struct fc_disc *disc, struct fc_frame *fp)
 {
 	struct fc_lport *lport = disc->lport;
 	unsigned long delay = 0;
-	if (fc_disc_debug)
-		FC_DBG("Error %ld, retries %d/%d\n",
-		       PTR_ERR(fp), disc->retry_count,
-		       FC_DISC_RETRY_LIMIT);
+
+	FC_DISC_DBG(disc, "Error %ld, retries %d/%d\n",
+		    PTR_ERR(fp), disc->retry_count,
+		    FC_DISC_RETRY_LIMIT);
 
 	if (!fp || PTR_ERR(fp) == -FC_EX_TIMEOUT) {
 		/*
@@ -649,9 +638,9 @@ static int fc_disc_gpn_ft_parse(struct fc_disc *disc, void *buf, size_t len)
 					      &disc->rogue_rports);
 				lport->tt.rport_login(rport);
 			} else
-				FC_DBG("Failed to allocate memory for "
-				       "the newly discovered port (%6x)\n",
-				       dp.ids.port_id);
+				printk(KERN_WARNING "libfc: Failed to allocate "
+				       "memory for the newly discovered port "
+				       "(%6x)\n", dp.ids.port_id);
 		}
 
 		if (np->fp_flags & FC_NS_FID_LAST) {
@@ -671,9 +660,8 @@ static int fc_disc_gpn_ft_parse(struct fc_disc *disc, void *buf, size_t len)
 	 */
 	if (error == 0 && len > 0 && len < sizeof(*np)) {
 		if (np != &disc->partial_buf) {
-			FC_DEBUG_DISC("Partial buffer remains "
-				      "for discovery by (%6x)\n",
-				      fc_host_port_id(lport->host));
+			FC_DISC_DBG(disc, "Partial buffer remains "
+				    "for discovery\n");
 			memcpy(&disc->partial_buf, np, len);
 		}
 		disc->buf_len = (unsigned char) len;
@@ -721,8 +709,7 @@ static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp,
 	int error;
 
 	mutex_lock(&disc->disc_mutex);
-	FC_DEBUG_DISC("Received a GPN_FT response on port (%6x)\n",
-		      fc_host_port_id(disc->lport->host));
+	FC_DISC_DBG(disc, "Received a GPN_FT response\n");
 
 	if (IS_ERR(fp)) {
 		fc_disc_error(disc, fp);
@@ -738,30 +725,30 @@ static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp,
 	    disc->seq_count == 0) {
 		cp = fc_frame_payload_get(fp, sizeof(*cp));
 		if (!cp) {
-			FC_DBG("GPN_FT response too short, len %d\n",
-			       fr_len(fp));
+			FC_DISC_DBG(disc, "GPN_FT response too short, len %d\n",
+				    fr_len(fp));
 		} else if (ntohs(cp->ct_cmd) == FC_FS_ACC) {
 
 			/* Accepted, parse the response. */
 			buf = cp + 1;
 			len -= sizeof(*cp);
 		} else if (ntohs(cp->ct_cmd) == FC_FS_RJT) {
-			FC_DBG("GPN_FT rejected reason %x exp %x "
-			       "(check zoning)\n", cp->ct_reason,
-			       cp->ct_explan);
+			FC_DISC_DBG(disc, "GPN_FT rejected reason %x exp %x "
+				    "(check zoning)\n", cp->ct_reason,
+				    cp->ct_explan);
 			disc->event = DISC_EV_FAILED;
 			fc_disc_done(disc);
 		} else {
-			FC_DBG("GPN_FT unexpected response code %x\n",
-			       ntohs(cp->ct_cmd));
+			FC_DISC_DBG(disc, "GPN_FT unexpected response code "
+				    "%x\n", ntohs(cp->ct_cmd));
 		}
 	} else if (fr_sof(fp) == FC_SOF_N3 &&
 		   seq_cnt == disc->seq_count) {
 		buf = fh + 1;
 	} else {
-		FC_DBG("GPN_FT unexpected frame - out of sequence? "
-		       "seq_cnt %x expected %x sof %x eof %x\n",
-		       seq_cnt, disc->seq_count, fr_sof(fp), fr_eof(fp));
+		FC_DISC_DBG(disc, "GPN_FT unexpected frame - out of sequence? "
+			    "seq_cnt %x expected %x sof %x eof %x\n",
+			    seq_cnt, disc->seq_count, fr_sof(fp), fr_eof(fp));
 	}
 	if (buf) {
 		error = fc_disc_gpn_ft_parse(disc, buf, len);
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 7af9bceb8aa..2bc22be5f84 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -32,18 +32,7 @@
 #include <scsi/libfc.h>
 #include <scsi/fc_encode.h>
 
-/*
- * fc_exch_debug can be set in debugger or at compile time to get more logs.
- */
-static int fc_exch_debug;
-
-#define FC_DEBUG_EXCH(fmt...)			\
-	do {					\
-		if (fc_exch_debug)		\
-			FC_DBG(fmt);		\
-	} while (0)
-
-static struct kmem_cache *fc_em_cachep;	/* cache for exchanges */
+static struct kmem_cache *fc_em_cachep;        /* cache for exchanges */
 
 /*
  * Structure and function definitions for managing Fibre Channel Exchanges
@@ -333,8 +322,8 @@ static inline void fc_exch_timer_set_locked(struct fc_exch *ep,
 	if (ep->state & (FC_EX_RST_CLEANUP | FC_EX_DONE))
 		return;
 
-	FC_DEBUG_EXCH("Exchange (%4x) timed out, notifying the upper layer\n",
-		      ep->xid);
+	FC_EXCH_DBG(ep, "Exchange timed out, notifying the upper layer\n");
+
 	if (schedule_delayed_work(&ep->timeout_work,
 				  msecs_to_jiffies(timer_msec)))
 		fc_exch_hold(ep);		/* hold for timer */
@@ -545,7 +534,7 @@ struct fc_exch *fc_exch_alloc(struct fc_exch_mgr *mp,
 		/* alloc a new xid */
 		xid = fc_em_alloc_xid(mp, fp);
 		if (!xid) {
-			printk(KERN_ERR "fc_em_alloc_xid() failed\n");
+			printk(KERN_WARNING "libfc: Failed to allocate an exhange\n");
 			goto err;
 		}
 	}
@@ -820,8 +809,8 @@ static struct fc_seq *fc_seq_start_next_locked(struct fc_seq *sp)
 	struct fc_exch *ep = fc_seq_exch(sp);
 
 	sp = fc_seq_alloc(ep, ep->seq_id++);
-	FC_DEBUG_EXCH("exch %4x f_ctl %6x seq %2x\n",
-		      ep->xid, ep->f_ctl, sp->id);
+	FC_EXCH_DBG(ep, "f_ctl %6x seq %2x\n",
+		    ep->f_ctl, sp->id);
 	return sp;
 }
 /*
@@ -901,7 +890,7 @@ void fc_seq_els_rsp_send(struct fc_seq *sp, enum fc_els_cmd els_cmd,
 		fc_exch_els_rec(sp, els_data->fp);
 		break;
 	default:
-		FC_DBG("Invalid ELS CMD:%x\n", els_cmd);
+		FC_EXCH_DBG(fc_seq_exch(sp), "Invalid ELS CMD:%x\n", els_cmd);
 	}
 }
 EXPORT_SYMBOL(fc_seq_els_rsp_send);
@@ -1134,7 +1123,7 @@ static void fc_exch_recv_req(struct fc_lport *lp, struct fc_exch_mgr *mp,
 			lp->tt.lport_recv(lp, sp, fp);
 		fc_exch_release(ep);	/* release from lookup */
 	} else {
-		FC_DEBUG_EXCH("exch/seq lookup failed: reject %x\n", reject);
+		FC_EM_DBG(mp, "exch/seq lookup failed: reject %x\n", reject);
 		fc_frame_free(fp);
 	}
 }
@@ -1242,10 +1231,10 @@ static void fc_exch_recv_resp(struct fc_exch_mgr *mp, struct fc_frame *fp)
 	sp = fc_seq_lookup_orig(mp, fp);	/* doesn't hold sequence */
 	if (!sp) {
 		atomic_inc(&mp->stats.xid_not_found);
-		FC_DEBUG_EXCH("seq lookup failed\n");
+		FC_EM_DBG(mp, "seq lookup failed\n");
 	} else {
 		atomic_inc(&mp->stats.non_bls_resp);
-		FC_DEBUG_EXCH("non-BLS response to sequence");
+		FC_EM_DBG(mp, "non-BLS response to sequence");
 	}
 	fc_frame_free(fp);
 }
@@ -1266,8 +1255,8 @@ static void fc_exch_abts_resp(struct fc_exch *ep, struct fc_frame *fp)
 	int rc = 1, has_rec = 0;
 
 	fh = fc_frame_header_get(fp);
-	FC_DEBUG_EXCH("exch: BLS rctl %x - %s\n",
-		      fh->fh_r_ctl, fc_exch_rctl_name(fh->fh_r_ctl));
+	FC_EXCH_DBG(ep, "exch: BLS rctl %x - %s\n", fh->fh_r_ctl,
+		    fc_exch_rctl_name(fh->fh_r_ctl));
 
 	if (cancel_delayed_work_sync(&ep->timeout_work))
 		fc_exch_release(ep);	/* release from pending timer hold */
@@ -1359,9 +1348,9 @@ static void fc_exch_recv_bls(struct fc_exch_mgr *mp, struct fc_frame *fp)
 		case FC_RCTL_ACK_0:
 			break;
 		default:
-			FC_DEBUG_EXCH("BLS rctl %x - %s received",
-				      fh->fh_r_ctl,
-				      fc_exch_rctl_name(fh->fh_r_ctl));
+			FC_EXCH_DBG(ep, "BLS rctl %x - %s received",
+				    fh->fh_r_ctl,
+				    fc_exch_rctl_name(fh->fh_r_ctl));
 			break;
 		}
 		fc_frame_free(fp);
@@ -1599,7 +1588,8 @@ static void fc_exch_rrq_resp(struct fc_seq *sp, struct fc_frame *fp, void *arg)
 
 		if (err == -FC_EX_CLOSED || err == -FC_EX_TIMEOUT)
 			goto cleanup;
-		FC_DBG("Cannot process RRQ, because of frame error %d\n", err);
+		FC_EXCH_DBG(aborted_ep, "Cannot process RRQ, "
+			    "frame error %d\n", err);
 		return;
 	}
 
@@ -1608,12 +1598,13 @@ static void fc_exch_rrq_resp(struct fc_seq *sp, struct fc_frame *fp, void *arg)
 
 	switch (op) {
 	case ELS_LS_RJT:
-		FC_DBG("LS_RJT for RRQ");
+		FC_EXCH_DBG(aborted_ep, "LS_RJT for RRQ");
 		/* fall through */
 	case ELS_LS_ACC:
 		goto cleanup;
 	default:
-		FC_DBG("unexpected response op %x for RRQ", op);
+		FC_EXCH_DBG(aborted_ep, "unexpected response op %x "
+			    "for RRQ", op);
 		return;
 	}
 
@@ -1740,8 +1731,8 @@ struct fc_exch_mgr *fc_exch_mgr_alloc(struct fc_lport *lp,
 	size_t len;
 
 	if (max_xid <= min_xid || min_xid == 0 || max_xid == FC_XID_UNKNOWN) {
-		FC_DBG("Invalid min_xid 0x:%x and max_xid 0x:%x\n",
-		       min_xid, max_xid);
+		FC_LPORT_DBG(lp, "Invalid min_xid 0x:%x and max_xid 0x:%x\n",
+			     min_xid, max_xid);
 		return NULL;
 	}
 
@@ -1878,7 +1869,8 @@ void fc_exch_recv(struct fc_lport *lp, struct fc_exch_mgr *mp,
 
 	/* lport lock ? */
 	if (!lp || !mp || (lp->state == LPORT_ST_NONE)) {
-		FC_DBG("fc_lport or EM is not allocated and configured");
+		FC_LPORT_DBG(lp, "Receiving frames for an lport that "
+			     "has not been initialized correctly\n");
 		fc_frame_free(fp);
 		return;
 	}
@@ -1904,7 +1896,7 @@ void fc_exch_recv(struct fc_lport *lp, struct fc_exch_mgr *mp,
 			fc_exch_recv_req(lp, mp, fp);
 		break;
 	default:
-		FC_DBG("dropping invalid frame (eof %x)", fr_eof(fp));
+		FC_EM_DBG(mp, "dropping invalid frame (eof %x)", fr_eof(fp));
 		fc_frame_free(fp);
 		break;
 	}
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index ad8b747837b..e303e0d12c4 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -43,13 +43,9 @@ MODULE_AUTHOR("Open-FCoE.org");
 MODULE_DESCRIPTION("libfc");
 MODULE_LICENSE("GPL v2");
 
-static int fc_fcp_debug;
-
-#define FC_DEBUG_FCP(fmt...)			\
-	do {					\
-		if (fc_fcp_debug)		\
-			FC_DBG(fmt);		\
-	} while (0)
+unsigned int fc_debug_logging;
+module_param_named(debug_logging, fc_debug_logging, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(debug_logging, "a bit mask of logging levels");
 
 static struct kmem_cache *scsi_pkt_cachep;
 
@@ -347,8 +343,8 @@ static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
 		if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) &&
 		    fc_frame_crc_check(fp))
 			goto crc_err;
-		FC_DEBUG_FCP("data received past end. len %zx offset %zx "
-			     "data_len %x\n", len, offset, fsp->data_len);
+		FC_FCP_DBG(fsp, "data received past end. len %zx offset %zx "
+			   "data_len %x\n", len, offset, fsp->data_len);
 		fc_fcp_retry_cmd(fsp);
 		return;
 	}
@@ -411,7 +407,8 @@ crc_err:
 			stats->ErrorFrames++;
 			/* FIXME - per cpu count, not total count! */
 			if (stats->InvalidCRCCount++ < 5)
-				printk(KERN_WARNING "CRC error on data frame for port (%6x)\n",
+				printk(KERN_WARNING "libfc: CRC error on data "
+				       "frame for port (%6x)\n",
 				       fc_host_port_id(lp->host));
 			/*
 			 * Assume the frame is total garbage.
@@ -475,14 +472,14 @@ static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq,
 	WARN_ON(seq_blen <= 0);
 	if (unlikely(offset + seq_blen > fsp->data_len)) {
 		/* this should never happen */
-		FC_DEBUG_FCP("xfer-ready past end. seq_blen %zx offset %zx\n",
-			     seq_blen, offset);
+		FC_FCP_DBG(fsp, "xfer-ready past end. seq_blen %zx "
+			   "offset %zx\n", seq_blen, offset);
 		fc_fcp_send_abort(fsp);
 		return 0;
 	} else if (offset != fsp->xfer_len) {
 		/* Out of Order Data Request - no problem, but unexpected. */
-		FC_DEBUG_FCP("xfer-ready non-contiguous. "
-			     "seq_blen %zx offset %zx\n", seq_blen, offset);
+		FC_FCP_DBG(fsp, "xfer-ready non-contiguous. "
+			   "seq_blen %zx offset %zx\n", seq_blen, offset);
 	}
 
 	/*
@@ -493,7 +490,7 @@ static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq,
 	t_blen = fsp->max_payload;
 	if (lp->seq_offload) {
 		t_blen = min(seq_blen, (size_t)lp->lso_max);
-		FC_DEBUG_FCP("fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n",
+		FC_FCP_DBG(fsp, "fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n",
 			   fsp, seq_blen, lp->lso_max, t_blen);
 	}
 
@@ -694,7 +691,7 @@ static void fc_fcp_reduce_can_queue(struct fc_lport *lp)
 	if (!can_queue)
 		can_queue = 1;
 	lp->host->can_queue = can_queue;
-	shost_printk(KERN_ERR, lp->host, "Could not allocate frame.\n"
+	shost_printk(KERN_ERR, lp->host, "libfc: Could not allocate frame.\n"
 		     "Reducing can_queue to %d.\n", can_queue);
 done:
 	spin_unlock_irqrestore(lp->host->host_lock, flags);
@@ -768,7 +765,7 @@ static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
 
 		fc_fcp_resp(fsp, fp);
 	} else {
-		FC_DBG("unexpected frame.  r_ctl %x\n", r_ctl);
+		FC_FCP_DBG(fsp, "unexpected frame.  r_ctl %x\n", r_ctl);
 	}
 unlock:
 	fc_fcp_unlock_pkt(fsp);
@@ -877,17 +874,17 @@ static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
 			return;
 		}
 		fsp->status_code = FC_DATA_OVRRUN;
-		FC_DBG("tgt %6x xfer len %zx greater than expected len %x. "
-		       "data len %x\n",
-		       fsp->rport->port_id,
-		       fsp->xfer_len, expected_len, fsp->data_len);
+		FC_FCP_DBG(fsp, "tgt %6x xfer len %zx greater than expected, "
+			   "len %x, data len %x\n",
+			   fsp->rport->port_id,
+			   fsp->xfer_len, expected_len, fsp->data_len);
 	}
 	fc_fcp_complete_locked(fsp);
 	return;
 
 len_err:
-	FC_DBG("short FCP response. flags 0x%x len %u respl %u snsl %u\n",
-	       flags, fr_len(fp), respl, snsl);
+	FC_FCP_DBG(fsp, "short FCP response. flags 0x%x len %u respl %u "
+		   "snsl %u\n", flags, fr_len(fp), respl, snsl);
 err:
 	fsp->status_code = FC_ERROR;
 	fc_fcp_complete_locked(fsp);
@@ -1107,13 +1104,11 @@ static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
 	if (fc_fcp_lock_pkt(fsp))
 		return;
 
-	switch (error) {
-	case -FC_EX_CLOSED:
+	if (error == -FC_EX_CLOSED) {
 		fc_fcp_retry_cmd(fsp);
 		goto unlock;
-	default:
-		FC_DBG("unknown error %ld\n", PTR_ERR(fp));
 	}
+
 	/*
 	 * clear abort pending, because the lower layer
 	 * decided to force completion.
@@ -1145,10 +1140,10 @@ static int fc_fcp_pkt_abort(struct fc_lport *lp, struct fc_fcp_pkt *fsp)
 	fsp->wait_for_comp = 0;
 
 	if (!rc) {
-		FC_DBG("target abort cmd  failed\n");
+		FC_FCP_DBG(fsp, "target abort cmd  failed\n");
 		rc = FAILED;
 	} else if (fsp->state & FC_SRB_ABORTED) {
-		FC_DBG("target abort cmd  passed\n");
+		FC_FCP_DBG(fsp, "target abort cmd  passed\n");
 		rc = SUCCESS;
 		fc_fcp_complete_locked(fsp);
 	}
@@ -1213,7 +1208,7 @@ static int fc_lun_reset(struct fc_lport *lp, struct fc_fcp_pkt *fsp,
 	spin_unlock_bh(&fsp->scsi_pkt_lock);
 
 	if (!rc) {
-		FC_DBG("lun reset failed\n");
+		FC_SCSI_DBG(lp, "lun reset failed\n");
 		return FAILED;
 	}
 
@@ -1221,7 +1216,7 @@ static int fc_lun_reset(struct fc_lport *lp, struct fc_fcp_pkt *fsp,
 	if (fsp->cdb_status != FCP_TMF_CMPL)
 		return FAILED;
 
-	FC_DBG("lun reset to lun %u completed\n", lun);
+	FC_SCSI_DBG(lp, "lun reset to lun %u completed\n", lun);
 	fc_fcp_cleanup_each_cmd(lp, id, lun, FC_CMD_ABORTED);
 	return SUCCESS;
 }
@@ -1388,13 +1383,13 @@ static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
 		rjt = fc_frame_payload_get(fp, sizeof(*rjt));
 		switch (rjt->er_reason) {
 		default:
-			FC_DEBUG_FCP("device %x unexpected REC reject "
-				     "reason %d expl %d\n",
-				     fsp->rport->port_id, rjt->er_reason,
-				     rjt->er_explan);
+			FC_FCP_DBG(fsp, "device %x unexpected REC reject "
+				   "reason %d expl %d\n",
+				   fsp->rport->port_id, rjt->er_reason,
+				   rjt->er_explan);
 			/* fall through */
 		case ELS_RJT_UNSUP:
-			FC_DEBUG_FCP("device does not support REC\n");
+			FC_FCP_DBG(fsp, "device does not support REC\n");
 			rp = fsp->rport->dd_data;
 			/*
 			 * if we do not spport RECs or got some bogus
@@ -1514,8 +1509,8 @@ static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
 		break;
 
 	default:
-		FC_DBG("REC %p fid %x error unexpected error %d\n",
-		       fsp, fsp->rport->port_id, error);
+		FC_FCP_DBG(fsp, "REC %p fid %x error unexpected error %d\n",
+			   fsp, fsp->rport->port_id, error);
 		fsp->status_code = FC_CMD_PLOGO;
 		/* fall through */
 
@@ -1524,9 +1519,9 @@ static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
 		 * Assume REC or LS_ACC was lost.
 		 * The exchange manager will have aborted REC, so retry.
 		 */
-		FC_DBG("REC fid %x error error %d retry %d/%d\n",
-		       fsp->rport->port_id, error, fsp->recov_retry,
-		       FC_MAX_RECOV_RETRY);
+		FC_FCP_DBG(fsp, "REC fid %x error error %d retry %d/%d\n",
+			   fsp->rport->port_id, error, fsp->recov_retry,
+			   FC_MAX_RECOV_RETRY);
 		if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
 			fc_fcp_rec(fsp);
 		else
@@ -2011,9 +2006,11 @@ int fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
 	if (lp->state != LPORT_ST_READY)
 		return rc;
 
+	FC_SCSI_DBG(lp, "Resetting rport (%6x)\n", rport->port_id);
+
 	fsp = fc_fcp_pkt_alloc(lp, GFP_NOIO);
 	if (fsp == NULL) {
-		FC_DBG("could not allocate scsi_pkt\n");
+		printk(KERN_WARNING "libfc: could not allocate scsi_pkt\n");
 		sc_cmd->result = DID_NO_CONNECT << 16;
 		goto out;
 	}
@@ -2048,17 +2045,21 @@ int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
 	struct fc_lport *lp = shost_priv(shost);
 	unsigned long wait_tmo;
 
+	FC_SCSI_DBG(lp, "Resetting host\n");
+
 	lp->tt.lport_reset(lp);
 	wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
 	while (!fc_fcp_lport_queue_ready(lp) && time_before(jiffies, wait_tmo))
 		msleep(1000);
 
 	if (fc_fcp_lport_queue_ready(lp)) {
-		shost_printk(KERN_INFO, shost, "Host reset succeeded.\n");
+		shost_printk(KERN_INFO, shost, "libfc: Host reset succeeded "
+			     "on port (%6x)\n", fc_host_port_id(lp->host));
 		return SUCCESS;
 	} else {
-		shost_printk(KERN_INFO, shost, "Host reset failed. "
-			     "lport not ready.\n");
+		shost_printk(KERN_INFO, shost, "libfc: Host reset failed, "
+			     "port (%6x) is not ready.\n",
+			     fc_host_port_id(lp->host));
 		return FAILED;
 	}
 }
@@ -2117,7 +2118,8 @@ void fc_fcp_destroy(struct fc_lport *lp)
 	struct fc_fcp_internal *si = fc_get_scsi_internal(lp);
 
 	if (!list_empty(&si->scsi_pkt_queue))
-		printk(KERN_ERR "Leaked scsi packets.\n");
+		printk(KERN_ERR "libfc: Leaked SCSI packets when destroying "
+		       "port (%6x)\n", fc_host_port_id(lp->host));
 
 	mempool_destroy(si->scsi_pkt_pool);
 	kfree(si);
@@ -2166,7 +2168,8 @@ static int __init libfc_init(void)
 					    sizeof(struct fc_fcp_pkt),
 					    0, SLAB_HWCACHE_ALIGN, NULL);
 	if (scsi_pkt_cachep == NULL) {
-		FC_DBG("Unable to allocate SRB cache...module load failed!");
+		printk(KERN_ERR "libfc: Unable to allocate SRB cache, "
+		       "module load failed!");
 		return -ENOMEM;
 	}
 
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index e0c247724d2..745fa5555d6 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -101,14 +101,6 @@
 
 #define	DNS_DELAY	      3 /* Discovery delay after RSCN (in seconds)*/
 
-static int fc_lport_debug;
-
-#define FC_DEBUG_LPORT(fmt...)			\
-	do {					\
-		if (fc_lport_debug)		\
-			FC_DBG(fmt);		\
-	} while (0)
-
 static void fc_lport_error(struct fc_lport *, struct fc_frame *);
 
 static void fc_lport_enter_reset(struct fc_lport *);
@@ -151,8 +143,8 @@ static void fc_lport_rport_callback(struct fc_lport *lport,
 				    struct fc_rport *rport,
 				    enum fc_rport_event event)
 {
-	FC_DEBUG_LPORT("Received a %d event for port (%6x)\n", event,
-		       rport->port_id);
+	FC_LPORT_DBG(lport, "Received a %d event for port (%6x)\n", event,
+		     rport->port_id);
 
 	switch (event) {
 	case RPORT_EV_CREATED:
@@ -162,19 +154,19 @@ static void fc_lport_rport_callback(struct fc_lport *lport,
 				lport->dns_rp = rport;
 				fc_lport_enter_rpn_id(lport);
 			} else {
-				FC_DEBUG_LPORT("Received an CREATED event on "
-					       "port (%6x) for the directory "
-					       "server, but the lport is not "
-					       "in the DNS state, it's in the "
-					       "%d state", rport->port_id,
-					       lport->state);
+				FC_LPORT_DBG(lport, "Received an CREATED event "
+					     "on port (%6x) for the directory "
+					     "server, but the lport is not "
+					     "in the DNS state, it's in the "
+					     "%d state", rport->port_id,
+					     lport->state);
 				lport->tt.rport_logoff(rport);
 			}
 			mutex_unlock(&lport->lp_mutex);
 		} else
-			FC_DEBUG_LPORT("Received an event for port (%6x) "
-				       "which is not the directory server\n",
-				       rport->port_id);
+			FC_LPORT_DBG(lport, "Received an event for port (%6x) "
+				     "which is not the directory server\n",
+				     rport->port_id);
 		break;
 	case RPORT_EV_LOGO:
 	case RPORT_EV_FAILED:
@@ -185,9 +177,9 @@ static void fc_lport_rport_callback(struct fc_lport *lport,
 			mutex_unlock(&lport->lp_mutex);
 
 		} else
-			FC_DEBUG_LPORT("Received an event for port (%6x) "
-				       "which is not the directory server\n",
-				       rport->port_id);
+			FC_LPORT_DBG(lport, "Received an event for port (%6x) "
+				     "which is not the directory server\n",
+				     rport->port_id);
 		break;
 	case RPORT_EV_NONE:
 		break;
@@ -363,8 +355,8 @@ static void fc_lport_add_fc4_type(struct fc_lport *lport, enum fc_fh_type type)
 static void fc_lport_recv_rlir_req(struct fc_seq *sp, struct fc_frame *fp,
 				   struct fc_lport *lport)
 {
-	FC_DEBUG_LPORT("Received RLIR request while in state %s\n",
-		       fc_lport_state(lport));
+	FC_LPORT_DBG(lport, "Received RLIR request while in state %s\n",
+		     fc_lport_state(lport));
 
 	lport->tt.seq_els_rsp_send(sp, ELS_LS_ACC, NULL);
 	fc_frame_free(fp);
@@ -389,8 +381,8 @@ static void fc_lport_recv_echo_req(struct fc_seq *sp, struct fc_frame *in_fp,
 	void *dp;
 	u32 f_ctl;
 
-	FC_DEBUG_LPORT("Received RLIR request while in state %s\n",
-		       fc_lport_state(lport));
+	FC_LPORT_DBG(lport, "Received RLIR request while in state %s\n",
+		     fc_lport_state(lport));
 
 	len = fr_len(in_fp) - sizeof(struct fc_frame_header);
 	pp = fc_frame_payload_get(in_fp, len);
@@ -437,8 +429,8 @@ static void fc_lport_recv_rnid_req(struct fc_seq *sp, struct fc_frame *in_fp,
 	size_t len;
 	u32 f_ctl;
 
-	FC_DEBUG_LPORT("Received RNID request while in state %s\n",
-		       fc_lport_state(lport));
+	FC_LPORT_DBG(lport, "Received RNID request while in state %s\n",
+		     fc_lport_state(lport));
 
 	req = fc_frame_payload_get(in_fp, sizeof(*req));
 	if (!req) {
@@ -498,8 +490,8 @@ static void fc_lport_recv_adisc_req(struct fc_seq *sp, struct fc_frame *in_fp,
 	size_t len;
 	u32 f_ctl;
 
-	FC_DEBUG_LPORT("Received ADISC request while in state %s\n",
-		       fc_lport_state(lport));
+	FC_LPORT_DBG(lport, "Received ADISC request while in state %s\n",
+		     fc_lport_state(lport));
 
 	req = fc_frame_payload_get(in_fp, sizeof(*req));
 	if (!req) {
@@ -574,8 +566,8 @@ EXPORT_SYMBOL(fc_fabric_login);
  */
 void fc_linkup(struct fc_lport *lport)
 {
-	FC_DEBUG_LPORT("Link is up for port (%6x)\n",
-		       fc_host_port_id(lport->host));
+	printk(KERN_INFO "libfc: Link up on port (%6x)\n",
+	       fc_host_port_id(lport->host));
 
 	mutex_lock(&lport->lp_mutex);
 	if (!lport->link_up) {
@@ -595,8 +587,8 @@ EXPORT_SYMBOL(fc_linkup);
 void fc_linkdown(struct fc_lport *lport)
 {
 	mutex_lock(&lport->lp_mutex);
-	FC_DEBUG_LPORT("Link is down for port (%6x)\n",
-		       fc_host_port_id(lport->host));
+	printk(KERN_INFO "libfc: Link down on port (%6x)\n",
+	       fc_host_port_id(lport->host));
 
 	if (lport->link_up) {
 		lport->link_up = 0;
@@ -701,12 +693,11 @@ void fc_lport_disc_callback(struct fc_lport *lport, enum fc_disc_event event)
 {
 	switch (event) {
 	case DISC_EV_SUCCESS:
-		FC_DEBUG_LPORT("Got a SUCCESS event for port (%6x)\n",
-			       fc_host_port_id(lport->host));
+		FC_LPORT_DBG(lport, "Discovery succeeded\n");
 		break;
 	case DISC_EV_FAILED:
-		FC_DEBUG_LPORT("Got a FAILED event for port (%6x)\n",
-			       fc_host_port_id(lport->host));
+		printk(KERN_ERR "libfc: Discovery failed for port (%6x)\n",
+		       fc_host_port_id(lport->host));
 		mutex_lock(&lport->lp_mutex);
 		fc_lport_enter_reset(lport);
 		mutex_unlock(&lport->lp_mutex);
@@ -726,8 +717,8 @@ void fc_lport_disc_callback(struct fc_lport *lport, enum fc_disc_event event)
  */
 static void fc_lport_enter_ready(struct fc_lport *lport)
 {
-	FC_DEBUG_LPORT("Port (%6x) entered Ready from state %s\n",
-		       fc_host_port_id(lport->host), fc_lport_state(lport));
+	FC_LPORT_DBG(lport, "Entered READY from state %s\n",
+		     fc_lport_state(lport));
 
 	fc_lport_state_enter(lport, LPORT_ST_READY);
 
@@ -762,8 +753,8 @@ static void fc_lport_recv_flogi_req(struct fc_seq *sp_in,
 	u32 local_fid;
 	u32 f_ctl;
 
-	FC_DEBUG_LPORT("Received FLOGI request while in state %s\n",
-		       fc_lport_state(lport));
+	FC_LPORT_DBG(lport, "Received FLOGI request while in state %s\n",
+		     fc_lport_state(lport));
 
 	fh = fc_frame_header_get(rx_fp);
 	remote_fid = ntoh24(fh->fh_s_id);
@@ -772,12 +763,11 @@ static void fc_lport_recv_flogi_req(struct fc_seq *sp_in,
 		goto out;
 	remote_wwpn = get_unaligned_be64(&flp->fl_wwpn);
 	if (remote_wwpn == lport->wwpn) {
-		FC_DBG("FLOGI from port with same WWPN %llx "
-		       "possible configuration error\n",
-		       (unsigned long long)remote_wwpn);
+		printk(KERN_WARNING "libfc: Received FLOGI from port "
+		       "with same WWPN %llx\n", remote_wwpn);
 		goto out;
 	}
-	FC_DBG("FLOGI from port WWPN %llx\n", (unsigned long long)remote_wwpn);
+	FC_LPORT_DBG(lport, "FLOGI from port WWPN %llx\n", remote_wwpn);
 
 	/*
 	 * XXX what is the right thing to do for FIDs?
@@ -909,7 +899,8 @@ static void fc_lport_recv_req(struct fc_lport *lport, struct fc_seq *sp,
 			}
 		}
 	} else {
-		FC_DBG("dropping invalid frame (eof %x)\n", fr_eof(fp));
+		FC_LPORT_DBG(lport, "dropping invalid frame (eof %x)\n",
+			     fr_eof(fp));
 		fc_frame_free(fp);
 	}
 	mutex_unlock(&lport->lp_mutex);
@@ -947,8 +938,8 @@ EXPORT_SYMBOL(fc_lport_reset);
  */
 static void fc_lport_enter_reset(struct fc_lport *lport)
 {
-	FC_DEBUG_LPORT("Port (%6x) entered RESET state from %s state\n",
-		       fc_host_port_id(lport->host), fc_lport_state(lport));
+	FC_LPORT_DBG(lport, "Entered RESET state from %s state\n",
+		     fc_lport_state(lport));
 
 	fc_lport_state_enter(lport, LPORT_ST_RESET);
 
@@ -982,9 +973,9 @@ static void fc_lport_enter_reset(struct fc_lport *lport)
 static void fc_lport_error(struct fc_lport *lport, struct fc_frame *fp)
 {
 	unsigned long delay = 0;
-	FC_DEBUG_LPORT("Error %ld in state %s, retries %d\n",
-		       PTR_ERR(fp), fc_lport_state(lport),
-		       lport->retry_count);
+	FC_LPORT_DBG(lport, "Error %ld in state %s, retries %d\n",
+		     PTR_ERR(fp), fc_lport_state(lport),
+		     lport->retry_count);
 
 	if (!fp || PTR_ERR(fp) == -FC_EX_TIMEOUT) {
 		/*
@@ -1040,11 +1031,11 @@ static void fc_lport_rft_id_resp(struct fc_seq *sp, struct fc_frame *fp,
 
 	mutex_lock(&lport->lp_mutex);
 
-	FC_DEBUG_LPORT("Received a RFT_ID response\n");
+	FC_LPORT_DBG(lport, "Received a RFT_ID response\n");
 
 	if (lport->state != LPORT_ST_RFT_ID) {
-		FC_DBG("Received a RFT_ID response, but in state %s\n",
-		       fc_lport_state(lport));
+		FC_LPORT_DBG(lport, "Received a RFT_ID response, but in state "
+			     "%s\n", fc_lport_state(lport));
 		if (IS_ERR(fp))
 			goto err;
 		goto out;
@@ -1094,11 +1085,11 @@ static void fc_lport_rpn_id_resp(struct fc_seq *sp, struct fc_frame *fp,
 
 	mutex_lock(&lport->lp_mutex);
 
-	FC_DEBUG_LPORT("Received a RPN_ID response\n");
+	FC_LPORT_DBG(lport, "Received a RPN_ID response\n");
 
 	if (lport->state != LPORT_ST_RPN_ID) {
-		FC_DBG("Received a RPN_ID response, but in state %s\n",
-		       fc_lport_state(lport));
+		FC_LPORT_DBG(lport, "Received a RPN_ID response, but in state "
+			     "%s\n", fc_lport_state(lport));
 		if (IS_ERR(fp))
 			goto err;
 		goto out;
@@ -1146,11 +1137,11 @@ static void fc_lport_scr_resp(struct fc_seq *sp, struct fc_frame *fp,
 
 	mutex_lock(&lport->lp_mutex);
 
-	FC_DEBUG_LPORT("Received a SCR response\n");
+	FC_LPORT_DBG(lport, "Received a SCR response\n");
 
 	if (lport->state != LPORT_ST_SCR) {
-		FC_DBG("Received a SCR response, but in state %s\n",
-		       fc_lport_state(lport));
+		FC_LPORT_DBG(lport, "Received a SCR response, but in state "
+			     "%s\n", fc_lport_state(lport));
 		if (IS_ERR(fp))
 			goto err;
 		goto out;
@@ -1184,8 +1175,8 @@ static void fc_lport_enter_scr(struct fc_lport *lport)
 {
 	struct fc_frame *fp;
 
-	FC_DEBUG_LPORT("Port (%6x) entered SCR state from %s state\n",
-		       fc_host_port_id(lport->host), fc_lport_state(lport));
+	FC_LPORT_DBG(lport, "Entered SCR state from %s state\n",
+		     fc_lport_state(lport));
 
 	fc_lport_state_enter(lport, LPORT_ST_SCR);
 
@@ -1213,8 +1204,8 @@ static void fc_lport_enter_rft_id(struct fc_lport *lport)
 	struct fc_ns_fts *lps;
 	int i;
 
-	FC_DEBUG_LPORT("Port (%6x) entered RFT_ID state from %s state\n",
-		       fc_host_port_id(lport->host), fc_lport_state(lport));
+	FC_LPORT_DBG(lport, "Entered RFT_ID state from %s state\n",
+		     fc_lport_state(lport));
 
 	fc_lport_state_enter(lport, LPORT_ST_RFT_ID);
 
@@ -1253,8 +1244,8 @@ static void fc_lport_enter_rpn_id(struct fc_lport *lport)
 {
 	struct fc_frame *fp;
 
-	FC_DEBUG_LPORT("Port (%6x) entered RPN_ID state from %s state\n",
-		       fc_host_port_id(lport->host), fc_lport_state(lport));
+	FC_LPORT_DBG(lport, "Entered RPN_ID state from %s state\n",
+		     fc_lport_state(lport));
 
 	fc_lport_state_enter(lport, LPORT_ST_RPN_ID);
 
@@ -1294,8 +1285,8 @@ static void fc_lport_enter_dns(struct fc_lport *lport)
 	dp.ids.roles = FC_RPORT_ROLE_UNKNOWN;
 	dp.lp = lport;
 
-	FC_DEBUG_LPORT("Port (%6x) entered DNS state from %s state\n",
-		       fc_host_port_id(lport->host), fc_lport_state(lport));
+	FC_LPORT_DBG(lport, "Entered DNS state from %s state\n",
+		     fc_lport_state(lport));
 
 	fc_lport_state_enter(lport, LPORT_ST_DNS);
 
@@ -1374,11 +1365,11 @@ static void fc_lport_logo_resp(struct fc_seq *sp, struct fc_frame *fp,
 
 	mutex_lock(&lport->lp_mutex);
 
-	FC_DEBUG_LPORT("Received a LOGO response\n");
+	FC_LPORT_DBG(lport, "Received a LOGO response\n");
 
 	if (lport->state != LPORT_ST_LOGO) {
-		FC_DBG("Received a LOGO response, but in state %s\n",
-		       fc_lport_state(lport));
+		FC_LPORT_DBG(lport, "Received a LOGO response, but in state "
+			     "%s\n", fc_lport_state(lport));
 		if (IS_ERR(fp))
 			goto err;
 		goto out;
@@ -1413,8 +1404,8 @@ static void fc_lport_enter_logo(struct fc_lport *lport)
 	struct fc_frame *fp;
 	struct fc_els_logo *logo;
 
-	FC_DEBUG_LPORT("Port (%6x) entered LOGO state from %s state\n",
-		       fc_host_port_id(lport->host), fc_lport_state(lport));
+	FC_LPORT_DBG(lport, "Entered LOGO state from %s state\n",
+		     fc_lport_state(lport));
 
 	fc_lport_state_enter(lport, LPORT_ST_LOGO);
 
@@ -1456,11 +1447,11 @@ static void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp,
 
 	mutex_lock(&lport->lp_mutex);
 
-	FC_DEBUG_LPORT("Received a FLOGI response\n");
+	FC_LPORT_DBG(lport, "Received a FLOGI response\n");
 
 	if (lport->state != LPORT_ST_FLOGI) {
-		FC_DBG("Received a FLOGI response, but in state %s\n",
-		       fc_lport_state(lport));
+		FC_LPORT_DBG(lport, "Received a FLOGI response, but in state "
+			     "%s\n", fc_lport_state(lport));
 		if (IS_ERR(fp))
 			goto err;
 		goto out;
@@ -1475,7 +1466,8 @@ static void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp,
 	did = ntoh24(fh->fh_d_id);
 	if (fc_frame_payload_op(fp) == ELS_LS_ACC && did != 0) {
 
-		FC_DEBUG_LPORT("Assigned fid %x\n", did);
+		printk(KERN_INFO "libfc: Assigned FID (%6x) in FLOGI response\n",
+		       did);
 		fc_host_port_id(lport->host) = did;
 
 		flp = fc_frame_payload_get(fp, sizeof(*flp));
@@ -1494,7 +1486,8 @@ static void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp,
 				if (e_d_tov > lport->e_d_tov)
 					lport->e_d_tov = e_d_tov;
 				lport->r_a_tov = 2 * e_d_tov;
-				FC_DBG("Point-to-Point mode\n");
+				printk(KERN_INFO "libfc: Port (%6x) entered "
+				       "point to point mode\n", did);
 				fc_lport_ptp_setup(lport, ntoh24(fh->fh_s_id),
 						   get_unaligned_be64(
 							   &flp->fl_wwpn),
@@ -1517,7 +1510,7 @@ static void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp,
 			}
 		}
 	} else {
-		FC_DBG("bad FLOGI response\n");
+		FC_LPORT_DBG(lport, "Bad FLOGI response\n");
 	}
 
 out:
@@ -1537,7 +1530,8 @@ void fc_lport_enter_flogi(struct fc_lport *lport)
 {
 	struct fc_frame *fp;
 
-	FC_DEBUG_LPORT("Processing FLOGI state\n");
+	FC_LPORT_DBG(lport, "Entered FLOGI state from %s state\n",
+		     fc_lport_state(lport));
 
 	fc_lport_state_enter(lport, LPORT_ST_FLOGI);
 
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index 7bfbff7e0ef..7162385f52e 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -55,14 +55,6 @@
 #include <scsi/libfc.h>
 #include <scsi/fc_encode.h>
 
-static int fc_rport_debug;
-
-#define FC_DEBUG_RPORT(fmt...)			\
-	do {					\
-		if (fc_rport_debug)		\
-			FC_DBG(fmt);		\
-	} while (0)
-
 struct workqueue_struct *rport_event_queue;
 
 static void fc_rport_enter_plogi(struct fc_rport *);
@@ -97,7 +89,7 @@ static const char *fc_rport_state_names[] = {
 static void fc_rport_rogue_destroy(struct device *dev)
 {
 	struct fc_rport *rport = dev_to_rport(dev);
-	FC_DEBUG_RPORT("Destroying rogue rport (%6x)\n", rport->port_id);
+	FC_RPORT_DBG(rport, "Destroying rogue rport\n");
 	kfree(rport);
 }
 
@@ -263,8 +255,8 @@ static void fc_rport_work(struct work_struct *work)
 
 			fc_rport_state_enter(new_rport, RPORT_ST_READY);
 		} else {
-			FC_DBG("Failed to create the rport for port "
-			       "(%6x).\n", ids.port_id);
+			printk(KERN_WARNING "libfc: Failed to allocate "
+			       " memory for rport (%6x)\n", ids.port_id);
 			event = RPORT_EV_FAILED;
 		}
 		if (rport->port_id != FC_FID_DIR_SERV)
@@ -309,7 +301,7 @@ int fc_rport_login(struct fc_rport *rport)
 
 	mutex_lock(&rdata->rp_mutex);
 
-	FC_DEBUG_RPORT("Login to port (%6x)\n", rport->port_id);
+	FC_RPORT_DBG(rport, "Login to port\n");
 
 	fc_rport_enter_plogi(rport);
 
@@ -329,16 +321,13 @@ int fc_rport_login(struct fc_rport *rport)
 int fc_rport_logoff(struct fc_rport *rport)
 {
 	struct fc_rport_libfc_priv *rdata = rport->dd_data;
-	struct fc_lport *lport = rdata->local_port;
 
 	mutex_lock(&rdata->rp_mutex);
 
-	FC_DEBUG_RPORT("Remove port (%6x)\n", rport->port_id);
+	FC_RPORT_DBG(rport, "Remove port\n");
 
 	if (rdata->rp_state == RPORT_ST_NONE) {
-		FC_DEBUG_RPORT("(%6x): Port (%6x) in NONE state,"
-			       " not removing", fc_host_port_id(lport->host),
-			       rport->port_id);
+		FC_RPORT_DBG(rport, "Port in NONE state, not removing\n");
 		mutex_unlock(&rdata->rp_mutex);
 		goto out;
 	}
@@ -379,7 +368,7 @@ static void fc_rport_enter_ready(struct fc_rport *rport)
 
 	fc_rport_state_enter(rport, RPORT_ST_READY);
 
-	FC_DEBUG_RPORT("Port (%6x) is Ready\n", rport->port_id);
+	FC_RPORT_DBG(rport, "Port is Ready\n");
 
 	rdata->event = RPORT_EV_CREATED;
 	queue_work(rport_event_queue, &rdata->event_work);
@@ -436,8 +425,8 @@ static void fc_rport_error(struct fc_rport *rport, struct fc_frame *fp)
 {
 	struct fc_rport_libfc_priv *rdata = rport->dd_data;
 
-	FC_DEBUG_RPORT("Error %ld in state %s, retries %d\n",
-		       PTR_ERR(fp), fc_rport_state(rport), rdata->retries);
+	FC_RPORT_DBG(rport, "Error %ld in state %s, retries %d\n",
+		     PTR_ERR(fp), fc_rport_state(rport), rdata->retries);
 
 	switch (rdata->rp_state) {
 	case RPORT_ST_PLOGI:
@@ -479,8 +468,8 @@ static void fc_rport_error_retry(struct fc_rport *rport, struct fc_frame *fp)
 		return fc_rport_error(rport, fp);
 
 	if (rdata->retries < rdata->local_port->max_rport_retry_count) {
-		FC_DEBUG_RPORT("Error %ld in state %s, retrying\n",
-			       PTR_ERR(fp), fc_rport_state(rport));
+		FC_RPORT_DBG(rport, "Error %ld in state %s, retrying\n",
+			     PTR_ERR(fp), fc_rport_state(rport));
 		rdata->retries++;
 		/* no additional delay on exchange timeouts */
 		if (PTR_ERR(fp) == -FC_EX_TIMEOUT)
@@ -517,12 +506,11 @@ static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp,
 
 	mutex_lock(&rdata->rp_mutex);
 
-	FC_DEBUG_RPORT("Received a PLOGI response from port (%6x)\n",
-		       rport->port_id);
+	FC_RPORT_DBG(rport, "Received a PLOGI response\n");
 
 	if (rdata->rp_state != RPORT_ST_PLOGI) {
-		FC_DBG("Received a PLOGI response, but in state %s\n",
-		       fc_rport_state(rport));
+		FC_RPORT_DBG(rport, "Received a PLOGI response, but in state "
+			     "%s\n", fc_rport_state(rport));
 		if (IS_ERR(fp))
 			goto err;
 		goto out;
@@ -583,8 +571,8 @@ static void fc_rport_enter_plogi(struct fc_rport *rport)
 	struct fc_lport *lport = rdata->local_port;
 	struct fc_frame *fp;
 
-	FC_DEBUG_RPORT("Port (%6x) entered PLOGI state from %s state\n",
-		       rport->port_id, fc_rport_state(rport));
+	FC_RPORT_DBG(rport, "Port entered PLOGI state from %s state\n",
+		     fc_rport_state(rport));
 
 	fc_rport_state_enter(rport, RPORT_ST_PLOGI);
 
@@ -628,12 +616,11 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp,
 
 	mutex_lock(&rdata->rp_mutex);
 
-	FC_DEBUG_RPORT("Received a PRLI response from port (%6x)\n",
-		       rport->port_id);
+	FC_RPORT_DBG(rport, "Received a PRLI response\n");
 
 	if (rdata->rp_state != RPORT_ST_PRLI) {
-		FC_DBG("Received a PRLI response, but in state %s\n",
-		       fc_rport_state(rport));
+		FC_RPORT_DBG(rport, "Received a PRLI response, but in state "
+			     "%s\n", fc_rport_state(rport));
 		if (IS_ERR(fp))
 			goto err;
 		goto out;
@@ -663,7 +650,7 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp,
 		fc_rport_enter_rtv(rport);
 
 	} else {
-		FC_DBG("Bad ELS response\n");
+		FC_RPORT_DBG(rport, "Bad ELS response for PRLI command\n");
 		rdata->event = RPORT_EV_FAILED;
 		fc_rport_state_enter(rport, RPORT_ST_NONE);
 		queue_work(rport_event_queue, &rdata->event_work);
@@ -695,12 +682,11 @@ static void fc_rport_logo_resp(struct fc_seq *sp, struct fc_frame *fp,
 
 	mutex_lock(&rdata->rp_mutex);
 
-	FC_DEBUG_RPORT("Received a LOGO response from port (%6x)\n",
-		       rport->port_id);
+	FC_RPORT_DBG(rport, "Received a LOGO response\n");
 
 	if (rdata->rp_state != RPORT_ST_LOGO) {
-		FC_DEBUG_RPORT("Received a LOGO response, but in state %s\n",
-			       fc_rport_state(rport));
+		FC_RPORT_DBG(rport, "Received a LOGO response, but in state "
+			     "%s\n", fc_rport_state(rport));
 		if (IS_ERR(fp))
 			goto err;
 		goto out;
@@ -715,7 +701,7 @@ static void fc_rport_logo_resp(struct fc_seq *sp, struct fc_frame *fp,
 	if (op == ELS_LS_ACC) {
 		fc_rport_enter_rtv(rport);
 	} else {
-		FC_DBG("Bad ELS response\n");
+		FC_RPORT_DBG(rport, "Bad ELS response for LOGO command\n");
 		rdata->event = RPORT_EV_LOGO;
 		fc_rport_state_enter(rport, RPORT_ST_NONE);
 		queue_work(rport_event_queue, &rdata->event_work);
@@ -745,8 +731,8 @@ static void fc_rport_enter_prli(struct fc_rport *rport)
 	} *pp;
 	struct fc_frame *fp;
 
-	FC_DEBUG_RPORT("Port (%6x) entered PRLI state from %s state\n",
-		       rport->port_id, fc_rport_state(rport));
+	FC_RPORT_DBG(rport, "Port entered PRLI state from %s state\n",
+		     fc_rport_state(rport));
 
 	fc_rport_state_enter(rport, RPORT_ST_PRLI);
 
@@ -784,12 +770,11 @@ static void fc_rport_rtv_resp(struct fc_seq *sp, struct fc_frame *fp,
 
 	mutex_lock(&rdata->rp_mutex);
 
-	FC_DEBUG_RPORT("Received a RTV response from port (%6x)\n",
-		       rport->port_id);
+	FC_RPORT_DBG(rport, "Received a RTV response\n");
 
 	if (rdata->rp_state != RPORT_ST_RTV) {
-		FC_DBG("Received a RTV response, but in state %s\n",
-		       fc_rport_state(rport));
+		FC_RPORT_DBG(rport, "Received a RTV response, but in state "
+			     "%s\n", fc_rport_state(rport));
 		if (IS_ERR(fp))
 			goto err;
 		goto out;
@@ -844,8 +829,8 @@ static void fc_rport_enter_rtv(struct fc_rport *rport)
 	struct fc_rport_libfc_priv *rdata = rport->dd_data;
 	struct fc_lport *lport = rdata->local_port;
 
-	FC_DEBUG_RPORT("Port (%6x) entered RTV state from %s state\n",
-		       rport->port_id, fc_rport_state(rport));
+	FC_RPORT_DBG(rport, "Port entered RTV state from %s state\n",
+		     fc_rport_state(rport));
 
 	fc_rport_state_enter(rport, RPORT_ST_RTV);
 
@@ -875,8 +860,8 @@ static void fc_rport_enter_logo(struct fc_rport *rport)
 	struct fc_lport *lport = rdata->local_port;
 	struct fc_frame *fp;
 
-	FC_DEBUG_RPORT("Port (%6x) entered LOGO state from %s state\n",
-		       rport->port_id, fc_rport_state(rport));
+	FC_RPORT_DBG(rport, "Port entered LOGO state from %s state\n",
+		     fc_rport_state(rport));
 
 	fc_rport_state_enter(rport, RPORT_ST_LOGO);
 
@@ -983,14 +968,13 @@ static void fc_rport_recv_plogi_req(struct fc_rport *rport,
 
 	fh = fc_frame_header_get(fp);
 
-	FC_DEBUG_RPORT("Received PLOGI request from port (%6x) "
-		       "while in state %s\n", ntoh24(fh->fh_s_id),
-		       fc_rport_state(rport));
+	FC_RPORT_DBG(rport, "Received PLOGI request while in state %s\n",
+		     fc_rport_state(rport));
 
 	sid = ntoh24(fh->fh_s_id);
 	pl = fc_frame_payload_get(fp, sizeof(*pl));
 	if (!pl) {
-		FC_DBG("incoming PLOGI from %x too short\n", sid);
+		FC_RPORT_DBG(rport, "Received PLOGI too short\n");
 		WARN_ON(1);
 		/* XXX TBD: send reject? */
 		fc_frame_free(fp);
@@ -1012,26 +996,26 @@ static void fc_rport_recv_plogi_req(struct fc_rport *rport,
 	 */
 	switch (rdata->rp_state) {
 	case RPORT_ST_INIT:
-		FC_DEBUG_RPORT("incoming PLOGI from %6x wwpn %llx state INIT "
-			       "- reject\n", sid, (unsigned long long)wwpn);
+		FC_RPORT_DBG(rport, "Received PLOGI, wwpn %llx state INIT "
+			     "- reject\n", (unsigned long long)wwpn);
 		reject = ELS_RJT_UNSUP;
 		break;
 	case RPORT_ST_PLOGI:
-		FC_DEBUG_RPORT("incoming PLOGI from %x in PLOGI state %d\n",
-			       sid, rdata->rp_state);
+		FC_RPORT_DBG(rport, "Received PLOGI in PLOGI state %d\n",
+			     rdata->rp_state);
 		if (wwpn < lport->wwpn)
 			reject = ELS_RJT_INPROG;
 		break;
 	case RPORT_ST_PRLI:
 	case RPORT_ST_READY:
-		FC_DEBUG_RPORT("incoming PLOGI from %x in logged-in state %d "
-			       "- ignored for now\n", sid, rdata->rp_state);
+		FC_RPORT_DBG(rport, "Received PLOGI in logged-in state %d "
+			     "- ignored for now\n", rdata->rp_state);
 		/* XXX TBD - should reset */
 		break;
 	case RPORT_ST_NONE:
 	default:
-		FC_DEBUG_RPORT("incoming PLOGI from %x in unexpected "
-			       "state %d\n", sid, rdata->rp_state);
+		FC_RPORT_DBG(rport, "Received PLOGI in unexpected "
+			     "state %d\n", rdata->rp_state);
 		fc_frame_free(fp);
 		return;
 		break;
@@ -1115,9 +1099,8 @@ static void fc_rport_recv_prli_req(struct fc_rport *rport,
 
 	fh = fc_frame_header_get(rx_fp);
 
-	FC_DEBUG_RPORT("Received PRLI request from port (%6x) "
-		       "while in state %s\n", ntoh24(fh->fh_s_id),
-		       fc_rport_state(rport));
+	FC_RPORT_DBG(rport, "Received PRLI request while in state %s\n",
+		     fc_rport_state(rport));
 
 	switch (rdata->rp_state) {
 	case RPORT_ST_PRLI:
@@ -1252,9 +1235,8 @@ static void fc_rport_recv_prlo_req(struct fc_rport *rport, struct fc_seq *sp,
 
 	fh = fc_frame_header_get(fp);
 
-	FC_DEBUG_RPORT("Received PRLO request from port (%6x) "
-		       "while in state %s\n", ntoh24(fh->fh_s_id),
-		       fc_rport_state(rport));
+	FC_RPORT_DBG(rport, "Received PRLO request while in state %s\n",
+		     fc_rport_state(rport));
 
 	if (rdata->rp_state == RPORT_ST_NONE) {
 		fc_frame_free(fp);
@@ -1286,9 +1268,8 @@ static void fc_rport_recv_logo_req(struct fc_rport *rport, struct fc_seq *sp,
 
 	fh = fc_frame_header_get(fp);
 
-	FC_DEBUG_RPORT("Received LOGO request from port (%6x) "
-		       "while in state %s\n", ntoh24(fh->fh_s_id),
-		       fc_rport_state(rport));
+	FC_RPORT_DBG(rport, "Received LOGO request while in state %s\n",
+		     fc_rport_state(rport));
 
 	if (rdata->rp_state == RPORT_ST_NONE) {
 		fc_frame_free(fp);
@@ -1308,7 +1289,6 @@ static void fc_rport_flush_queue(void)
 	flush_workqueue(rport_event_queue);
 }
 
-
 int fc_rport_init(struct fc_lport *lport)
 {
 	if (!lport->tt.rport_create)
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 59908aead53..716cc344c5d 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -38,15 +38,30 @@
 #include <scsi/scsi_transport_iscsi.h>
 #include <scsi/libiscsi.h>
 
-static int iscsi_dbg_lib;
-module_param_named(debug_libiscsi, iscsi_dbg_lib, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug_libiscsi, "Turn on debugging for libiscsi module. "
-		 "Set to 1 to turn on, and zero to turn off. Default "
-		 "is off.");
+static int iscsi_dbg_lib_conn;
+module_param_named(debug_libiscsi_conn, iscsi_dbg_lib_conn, int,
+		   S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug_libiscsi_conn,
+		 "Turn on debugging for connections in libiscsi module. "
+		 "Set to 1 to turn on, and zero to turn off. Default is off.");
+
+static int iscsi_dbg_lib_session;
+module_param_named(debug_libiscsi_session, iscsi_dbg_lib_session, int,
+		   S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug_libiscsi_session,
+		 "Turn on debugging for sessions in libiscsi module. "
+		 "Set to 1 to turn on, and zero to turn off. Default is off.");
+
+static int iscsi_dbg_lib_eh;
+module_param_named(debug_libiscsi_eh, iscsi_dbg_lib_eh, int,
+		   S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug_libiscsi_eh,
+		 "Turn on debugging for error handling in libiscsi module. "
+		 "Set to 1 to turn on, and zero to turn off. Default is off.");
 
 #define ISCSI_DBG_CONN(_conn, dbg_fmt, arg...)			\
 	do {							\
-		if (iscsi_dbg_lib)				\
+		if (iscsi_dbg_lib_conn)				\
 			iscsi_conn_printk(KERN_INFO, _conn,	\
 					     "%s " dbg_fmt,	\
 					     __func__, ##arg);	\
@@ -54,7 +69,15 @@ MODULE_PARM_DESC(debug_libiscsi, "Turn on debugging for libiscsi module. "
 
 #define ISCSI_DBG_SESSION(_session, dbg_fmt, arg...)			\
 	do {								\
-		if (iscsi_dbg_lib)					\
+		if (iscsi_dbg_lib_session)				\
+			iscsi_session_printk(KERN_INFO, _session,	\
+					     "%s " dbg_fmt,		\
+					     __func__, ##arg);		\
+	} while (0);
+
+#define ISCSI_DBG_EH(_session, dbg_fmt, arg...)				\
+	do {								\
+		if (iscsi_dbg_lib_eh)					\
 			iscsi_session_printk(KERN_INFO, _session,	\
 					     "%s " dbg_fmt,		\
 					     __func__, ##arg);		\
@@ -954,6 +977,7 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 		task = iscsi_itt_to_ctask(conn, hdr->itt);
 		if (!task)
 			return ISCSI_ERR_BAD_ITT;
+		task->last_xfer = jiffies;
 		break;
 	case ISCSI_OP_R2T:
 		/*
@@ -1192,10 +1216,12 @@ static int iscsi_xmit_task(struct iscsi_conn *conn)
 	spin_unlock_bh(&conn->session->lock);
 	rc = conn->session->tt->xmit_task(task);
 	spin_lock_bh(&conn->session->lock);
-	__iscsi_put_task(task);
-	if (!rc)
+	if (!rc) {
 		/* done with this task */
+		task->last_xfer = jiffies;
 		conn->task = NULL;
+	}
+	__iscsi_put_task(task);
 	return rc;
 }
 
@@ -1361,6 +1387,9 @@ static inline struct iscsi_task *iscsi_alloc_task(struct iscsi_conn *conn,
 	task->state = ISCSI_TASK_PENDING;
 	task->conn = conn;
 	task->sc = sc;
+	task->have_checked_conn = false;
+	task->last_timeout = jiffies;
+	task->last_xfer = jiffies;
 	INIT_LIST_HEAD(&task->running);
 	return task;
 }
@@ -1555,10 +1584,10 @@ int iscsi_eh_target_reset(struct scsi_cmnd *sc)
 	spin_lock_bh(&session->lock);
 	if (session->state == ISCSI_STATE_TERMINATE) {
 failed:
-		iscsi_session_printk(KERN_INFO, session,
-				     "failing target reset: Could not log "
-				     "back into target [age %d]\n",
-				     session->age);
+		ISCSI_DBG_EH(session,
+			     "failing target reset: Could not log back into "
+			     "target [age %d]\n",
+			     session->age);
 		spin_unlock_bh(&session->lock);
 		mutex_unlock(&session->eh_mutex);
 		return FAILED;
@@ -1572,7 +1601,7 @@ failed:
 	 */
 	iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
 
-	ISCSI_DBG_SESSION(session, "wait for relogin\n");
+	ISCSI_DBG_EH(session, "wait for relogin\n");
 	wait_event_interruptible(conn->ehwait,
 				 session->state == ISCSI_STATE_TERMINATE ||
 				 session->state == ISCSI_STATE_LOGGED_IN ||
@@ -1582,10 +1611,10 @@ failed:
 
 	mutex_lock(&session->eh_mutex);
 	spin_lock_bh(&session->lock);
-	if (session->state == ISCSI_STATE_LOGGED_IN)
-		iscsi_session_printk(KERN_INFO, session,
-				     "target reset succeeded\n");
-	else
+	if (session->state == ISCSI_STATE_LOGGED_IN) {
+		ISCSI_DBG_EH(session,
+			     "target reset succeeded\n");
+	} else
 		goto failed;
 	spin_unlock_bh(&session->lock);
 	mutex_unlock(&session->eh_mutex);
@@ -1601,7 +1630,7 @@ static void iscsi_tmf_timedout(unsigned long data)
 	spin_lock(&session->lock);
 	if (conn->tmf_state == TMF_QUEUED) {
 		conn->tmf_state = TMF_TIMEDOUT;
-		ISCSI_DBG_SESSION(session, "tmf timedout\n");
+		ISCSI_DBG_EH(session, "tmf timedout\n");
 		/* unblock eh_abort() */
 		wake_up(&conn->ehwait);
 	}
@@ -1621,7 +1650,7 @@ static int iscsi_exec_task_mgmt_fn(struct iscsi_conn *conn,
 		spin_unlock_bh(&session->lock);
 		iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
 		spin_lock_bh(&session->lock);
-		ISCSI_DBG_SESSION(session, "tmf exec failure\n");
+		ISCSI_DBG_EH(session, "tmf exec failure\n");
 		return -EPERM;
 	}
 	conn->tmfcmd_pdus_cnt++;
@@ -1629,7 +1658,7 @@ static int iscsi_exec_task_mgmt_fn(struct iscsi_conn *conn,
 	conn->tmf_timer.function = iscsi_tmf_timedout;
 	conn->tmf_timer.data = (unsigned long)conn;
 	add_timer(&conn->tmf_timer);
-	ISCSI_DBG_SESSION(session, "tmf set timeout\n");
+	ISCSI_DBG_EH(session, "tmf set timeout\n");
 
 	spin_unlock_bh(&session->lock);
 	mutex_unlock(&session->eh_mutex);
@@ -1716,17 +1745,18 @@ static int iscsi_has_ping_timed_out(struct iscsi_conn *conn)
 		return 0;
 }
 
-static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *scmd)
+static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc)
 {
+	enum blk_eh_timer_return rc = BLK_EH_NOT_HANDLED;
+	struct iscsi_task *task = NULL;
 	struct iscsi_cls_session *cls_session;
 	struct iscsi_session *session;
 	struct iscsi_conn *conn;
-	enum blk_eh_timer_return rc = BLK_EH_NOT_HANDLED;
 
-	cls_session = starget_to_session(scsi_target(scmd->device));
+	cls_session = starget_to_session(scsi_target(sc->device));
 	session = cls_session->dd_data;
 
-	ISCSI_DBG_SESSION(session, "scsi cmd %p timedout\n", scmd);
+	ISCSI_DBG_EH(session, "scsi cmd %p timedout\n", sc);
 
 	spin_lock(&session->lock);
 	if (session->state != ISCSI_STATE_LOGGED_IN) {
@@ -1745,6 +1775,26 @@ static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *scmd)
 		goto done;
 	}
 
+	task = (struct iscsi_task *)sc->SCp.ptr;
+	if (!task)
+		goto done;
+	/*
+	 * If we have sent (at least queued to the network layer) a pdu or
+	 * recvd one for the task since the last timeout ask for
+	 * more time. If on the next timeout we have not made progress
+	 * we can check if it is the task or connection when we send the
+	 * nop as a ping.
+	 */
+	if (time_after_eq(task->last_xfer, task->last_timeout)) {
+		ISCSI_DBG_EH(session, "Command making progress. Asking "
+			     "scsi-ml for more time to complete. "
+			     "Last data recv at %lu. Last timeout was at "
+			     "%lu\n.", task->last_xfer, task->last_timeout);
+		task->have_checked_conn = false;
+		rc = BLK_EH_RESET_TIMER;
+		goto done;
+	}
+
 	if (!conn->recv_timeout && !conn->ping_timeout)
 		goto done;
 	/*
@@ -1755,23 +1805,32 @@ static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *scmd)
 		rc = BLK_EH_RESET_TIMER;
 		goto done;
 	}
+
+	/* Assumes nop timeout is shorter than scsi cmd timeout */
+	if (task->have_checked_conn)
+		goto done;
+
 	/*
-	 * if we are about to check the transport then give the command
-	 * more time
+	 * Checking the transport already or nop from a cmd timeout still
+	 * running
 	 */
-	if (time_before_eq(conn->last_recv + (conn->recv_timeout * HZ),
-			   jiffies)) {
+	if (conn->ping_task) {
+		task->have_checked_conn = true;
 		rc = BLK_EH_RESET_TIMER;
 		goto done;
 	}
 
-	/* if in the middle of checking the transport then give us more time */
-	if (conn->ping_task)
-		rc = BLK_EH_RESET_TIMER;
+	/* Make sure there is a transport check done */
+	iscsi_send_nopout(conn, NULL);
+	task->have_checked_conn = true;
+	rc = BLK_EH_RESET_TIMER;
+
 done:
+	if (task)
+		task->last_timeout = jiffies;
 	spin_unlock(&session->lock);
-	ISCSI_DBG_SESSION(session, "return %s\n", rc == BLK_EH_RESET_TIMER ?
-			  "timer reset" : "nh");
+	ISCSI_DBG_EH(session, "return %s\n", rc == BLK_EH_RESET_TIMER ?
+		     "timer reset" : "nh");
 	return rc;
 }
 
@@ -1841,7 +1900,7 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
 	cls_session = starget_to_session(scsi_target(sc->device));
 	session = cls_session->dd_data;
 
-	ISCSI_DBG_SESSION(session, "aborting sc %p\n", sc);
+	ISCSI_DBG_EH(session, "aborting sc %p\n", sc);
 
 	mutex_lock(&session->eh_mutex);
 	spin_lock_bh(&session->lock);
@@ -1850,8 +1909,8 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
 	 * got the command.
 	 */
 	if (!sc->SCp.ptr) {
-		ISCSI_DBG_SESSION(session, "sc never reached iscsi layer or "
-				  "it completed.\n");
+		ISCSI_DBG_EH(session, "sc never reached iscsi layer or "
+				      "it completed.\n");
 		spin_unlock_bh(&session->lock);
 		mutex_unlock(&session->eh_mutex);
 		return SUCCESS;
@@ -1865,7 +1924,7 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
 	    sc->SCp.phase != session->age) {
 		spin_unlock_bh(&session->lock);
 		mutex_unlock(&session->eh_mutex);
-		ISCSI_DBG_SESSION(session, "failing abort due to dropped "
+		ISCSI_DBG_EH(session, "failing abort due to dropped "
 				  "session.\n");
 		return FAILED;
 	}
@@ -1875,13 +1934,12 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
 	age = session->age;
 
 	task = (struct iscsi_task *)sc->SCp.ptr;
-	ISCSI_DBG_SESSION(session, "aborting [sc %p itt 0x%x]\n",
-			  sc, task->itt);
+	ISCSI_DBG_EH(session, "aborting [sc %p itt 0x%x]\n",
+		     sc, task->itt);
 
 	/* task completed before time out */
 	if (!task->sc) {
-		ISCSI_DBG_SESSION(session, "sc completed while abort in "
-				  "progress\n");
+		ISCSI_DBG_EH(session, "sc completed while abort in progress\n");
 		goto success;
 	}
 
@@ -1930,8 +1988,8 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
 		if (!sc->SCp.ptr) {
 			conn->tmf_state = TMF_INITIAL;
 			/* task completed before tmf abort response */
-			ISCSI_DBG_SESSION(session, "sc completed while abort "
-					  "in progress\n");
+			ISCSI_DBG_EH(session, "sc completed while abort	in "
+					      "progress\n");
 			goto success;
 		}
 		/* fall through */
@@ -1943,16 +2001,16 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
 success:
 	spin_unlock_bh(&session->lock);
 success_unlocked:
-	ISCSI_DBG_SESSION(session, "abort success [sc %p itt 0x%x]\n",
-			  sc, task->itt);
+	ISCSI_DBG_EH(session, "abort success [sc %p itt 0x%x]\n",
+		     sc, task->itt);
 	mutex_unlock(&session->eh_mutex);
 	return SUCCESS;
 
 failed:
 	spin_unlock_bh(&session->lock);
 failed_unlocked:
-	ISCSI_DBG_SESSION(session, "abort failed [sc %p itt 0x%x]\n", sc,
-			  task ? task->itt : 0);
+	ISCSI_DBG_EH(session, "abort failed [sc %p itt 0x%x]\n", sc,
+		     task ? task->itt : 0);
 	mutex_unlock(&session->eh_mutex);
 	return FAILED;
 }
@@ -1979,8 +2037,7 @@ int iscsi_eh_device_reset(struct scsi_cmnd *sc)
 	cls_session = starget_to_session(scsi_target(sc->device));
 	session = cls_session->dd_data;
 
-	ISCSI_DBG_SESSION(session, "LU Reset [sc %p lun %u]\n",
-			  sc, sc->device->lun);
+	ISCSI_DBG_EH(session, "LU Reset [sc %p lun %u]\n", sc, sc->device->lun);
 
 	mutex_lock(&session->eh_mutex);
 	spin_lock_bh(&session->lock);
@@ -2034,8 +2091,8 @@ int iscsi_eh_device_reset(struct scsi_cmnd *sc)
 unlock:
 	spin_unlock_bh(&session->lock);
 done:
-	ISCSI_DBG_SESSION(session, "dev reset result = %s\n",
-			 rc == SUCCESS ? "SUCCESS" : "FAILED");
+	ISCSI_DBG_EH(session, "dev reset result = %s\n",
+		     rc == SUCCESS ? "SUCCESS" : "FAILED");
 	mutex_unlock(&session->eh_mutex);
 	return rc;
 }
diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c
index 2bc07090321..2e0746d7030 100644
--- a/drivers/scsi/libiscsi_tcp.c
+++ b/drivers/scsi/libiscsi_tcp.c
@@ -686,6 +686,7 @@ iscsi_tcp_hdr_dissect(struct iscsi_conn *conn, struct iscsi_hdr *hdr)
 				     "offset=%d, datalen=%d)\n",
 				      tcp_task->data_offset,
 				      tcp_conn->in.datalen);
+			task->last_xfer = jiffies;
 			rc = iscsi_segment_seek_sg(&tcp_conn->in.segment,
 						   sdb->table.sgl,
 						   sdb->table.nents,
@@ -713,9 +714,10 @@ iscsi_tcp_hdr_dissect(struct iscsi_conn *conn, struct iscsi_hdr *hdr)
 			rc = ISCSI_ERR_BAD_ITT;
 		else if (ahslen)
 			rc = ISCSI_ERR_AHSLEN;
-		else if (task->sc->sc_data_direction == DMA_TO_DEVICE)
+		else if (task->sc->sc_data_direction == DMA_TO_DEVICE) {
+			task->last_xfer = jiffies;
 			rc = iscsi_tcp_r2t_rsp(conn, task);
-		else
+		} else
 			rc = ISCSI_ERR_PROTO;
 		spin_unlock(&conn->session->lock);
 		break;
diff --git a/drivers/scsi/ps3rom.c b/drivers/scsi/ps3rom.c
index ca0dd33497e..db90caf43f4 100644
--- a/drivers/scsi/ps3rom.c
+++ b/drivers/scsi/ps3rom.c
@@ -299,7 +299,7 @@ static irqreturn_t ps3rom_interrupt(int irq, void *data)
 		return IRQ_HANDLED;
 	}
 
-	host = dev->sbd.core.driver_data;
+	host = ps3_system_bus_get_drvdata(&dev->sbd);
 	priv = shost_priv(host);
 	cmd = priv->curr_cmd;
 
@@ -387,7 +387,7 @@ static int __devinit ps3rom_probe(struct ps3_system_bus_device *_dev)
 	}
 
 	priv = shost_priv(host);
-	dev->sbd.core.driver_data = host;
+	ps3_system_bus_set_drvdata(&dev->sbd, host);
 	priv->dev = dev;
 
 	/* One device/LUN per SCSI bus */
@@ -407,7 +407,7 @@ static int __devinit ps3rom_probe(struct ps3_system_bus_device *_dev)
 
 fail_host_put:
 	scsi_host_put(host);
-	dev->sbd.core.driver_data = NULL;
+	ps3_system_bus_set_drvdata(&dev->sbd, NULL);
 fail_teardown:
 	ps3stor_teardown(dev);
 fail_free_bounce:
@@ -418,12 +418,12 @@ fail_free_bounce:
 static int ps3rom_remove(struct ps3_system_bus_device *_dev)
 {
 	struct ps3_storage_device *dev = to_ps3_storage_device(&_dev->core);
-	struct Scsi_Host *host = dev->sbd.core.driver_data;
+	struct Scsi_Host *host = ps3_system_bus_get_drvdata(&dev->sbd);
 
 	scsi_remove_host(host);
 	ps3stor_teardown(dev);
 	scsi_host_put(host);
-	dev->sbd.core.driver_data = NULL;
+	ps3_system_bus_set_drvdata(&dev->sbd, NULL);
 	kfree(dev->bounce_buf);
 	return 0;
 }
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 4a990f4da4e..cca8e4ab037 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -216,7 +216,7 @@ qla24xx_soft_reset(struct qla_hw_data *ha)
 
 static int
 qla2xxx_dump_ram(struct qla_hw_data *ha, uint32_t addr, uint16_t *ram,
-    uint16_t ram_words, void **nxt)
+    uint32_t ram_words, void **nxt)
 {
 	int rval;
 	uint32_t cnt, stat, timer, words, idx;
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 26202612932..f2ce8e3cc91 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -2301,7 +2301,7 @@ qla2x00_iidma_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
 	static char *link_speeds[] = { "1", "2", "?", "4", "8", "10" };
 	char *link_speed;
 	int rval;
-	uint16_t mb[6];
+	uint16_t mb[4];
 	struct qla_hw_data *ha = vha->hw;
 
 	if (!IS_IIDMA_CAPABLE(ha))
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 451ece0760b..fe69f305767 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -1267,17 +1267,22 @@ qla2x00_get_firmware_state(scsi_qla_host_t *vha, uint16_t *states)
 
 	mcp->mb[0] = MBC_GET_FIRMWARE_STATE;
 	mcp->out_mb = MBX_0;
-	mcp->in_mb = MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
+	if (IS_FWI2_CAPABLE(vha->hw))
+		mcp->in_mb = MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
+	else
+		mcp->in_mb = MBX_1|MBX_0;
 	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 	rval = qla2x00_mailbox_command(vha, mcp);
 
 	/* Return firmware states. */
 	states[0] = mcp->mb[1];
-	states[1] = mcp->mb[2];
-	states[2] = mcp->mb[3];
-	states[3] = mcp->mb[4];
-	states[4] = mcp->mb[5];
+	if (IS_FWI2_CAPABLE(vha->hw)) {
+		states[1] = mcp->mb[2];
+		states[2] = mcp->mb[3];
+		states[3] = mcp->mb[4];
+		states[4] = mcp->mb[5];
+	}
 
 	if (rval != QLA_SUCCESS) {
 		/*EMPTY*/
@@ -2697,10 +2702,13 @@ qla2x00_set_idma_speed(scsi_qla_host_t *vha, uint16_t loop_id,
 	mcp->mb[0] = MBC_PORT_PARAMS;
 	mcp->mb[1] = loop_id;
 	mcp->mb[2] = BIT_0;
-	mcp->mb[3] = port_speed & (BIT_2|BIT_1|BIT_0);
-	mcp->mb[4] = mcp->mb[5] = 0;
-	mcp->out_mb = MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
-	mcp->in_mb = MBX_5|MBX_4|MBX_3|MBX_1|MBX_0;
+	if (IS_QLA81XX(vha->hw))
+		mcp->mb[3] = port_speed & (BIT_5|BIT_4|BIT_3|BIT_2|BIT_1|BIT_0);
+	else
+		mcp->mb[3] = port_speed & (BIT_2|BIT_1|BIT_0);
+	mcp->mb[9] = vha->vp_idx;
+	mcp->out_mb = MBX_9|MBX_3|MBX_2|MBX_1|MBX_0;
+	mcp->in_mb = MBX_3|MBX_1|MBX_0;
 	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 	rval = qla2x00_mailbox_command(vha, mcp);
@@ -2710,8 +2718,6 @@ qla2x00_set_idma_speed(scsi_qla_host_t *vha, uint16_t loop_id,
 		mb[0] = mcp->mb[0];
 		mb[1] = mcp->mb[1];
 		mb[3] = mcp->mb[3];
-		mb[4] = mcp->mb[4];
-		mb[5] = mcp->mb[5];
 	}
 
 	if (rval != QLA_SUCCESS) {
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index dcf011679c8..f0396e79b6f 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1663,7 +1663,7 @@ skip_pio:
 		/* queue 0 uses two msix vectors */
 		if (ql2xmultique_tag) {
 			cpus = num_online_cpus();
-			ha->max_rsp_queues = (ha->msix_count - 1 - cpus) ?
+			ha->max_rsp_queues = (ha->msix_count - 1 > cpus) ?
 				(cpus + 1) : (ha->msix_count - 1);
 			ha->max_req_queues = 2;
 		} else if (ql2xmaxqueues > 1) {
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index b63feaf4312..84369705a9a 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.03.01-k3"
+#define QLA2XXX_VERSION      "8.03.01-k4"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	3
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 41a21772df1..fb9af207d61 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -101,6 +101,8 @@ static const char * scsi_debug_version_date = "20070104";
 #define DEF_DIF 0
 #define DEF_GUARD 0
 #define DEF_ATO 1
+#define DEF_PHYSBLK_EXP 0
+#define DEF_LOWEST_ALIGNED 0
 
 /* bit mask values for scsi_debug_opts */
 #define SCSI_DEBUG_OPT_NOISE   1
@@ -156,6 +158,8 @@ static int scsi_debug_dix = DEF_DIX;
 static int scsi_debug_dif = DEF_DIF;
 static int scsi_debug_guard = DEF_GUARD;
 static int scsi_debug_ato = DEF_ATO;
+static int scsi_debug_physblk_exp = DEF_PHYSBLK_EXP;
+static int scsi_debug_lowest_aligned = DEF_LOWEST_ALIGNED;
 
 static int scsi_debug_cmnd_count = 0;
 
@@ -657,7 +661,12 @@ static unsigned char vpdb0_data[] = {
 
 static int inquiry_evpd_b0(unsigned char * arr)
 {
+	unsigned int gran;
+
 	memcpy(arr, vpdb0_data, sizeof(vpdb0_data));
+	gran = 1 << scsi_debug_physblk_exp;
+	arr[2] = (gran >> 8) & 0xff;
+	arr[3] = gran & 0xff;
 	if (sdebug_store_sectors > 0x400) {
 		arr[4] = (sdebug_store_sectors >> 24) & 0xff;
 		arr[5] = (sdebug_store_sectors >> 16) & 0xff;
@@ -945,6 +954,9 @@ static int resp_readcap16(struct scsi_cmnd * scp,
 	arr[9] = (scsi_debug_sector_size >> 16) & 0xff;
 	arr[10] = (scsi_debug_sector_size >> 8) & 0xff;
 	arr[11] = scsi_debug_sector_size & 0xff;
+	arr[13] = scsi_debug_physblk_exp & 0xf;
+	arr[14] = (scsi_debug_lowest_aligned >> 8) & 0x3f;
+	arr[15] = scsi_debug_lowest_aligned & 0xff;
 
 	if (scsi_debug_dif) {
 		arr[12] = (scsi_debug_dif - 1) << 1; /* P_TYPE */
@@ -2380,6 +2392,8 @@ module_param_named(dix, scsi_debug_dix, int, S_IRUGO);
 module_param_named(dif, scsi_debug_dif, int, S_IRUGO);
 module_param_named(guard, scsi_debug_guard, int, S_IRUGO);
 module_param_named(ato, scsi_debug_ato, int, S_IRUGO);
+module_param_named(physblk_exp, scsi_debug_physblk_exp, int, S_IRUGO);
+module_param_named(lowest_aligned, scsi_debug_lowest_aligned, int, S_IRUGO);
 
 MODULE_AUTHOR("Eric Youngdale + Douglas Gilbert");
 MODULE_DESCRIPTION("SCSI debug adapter driver");
@@ -2401,7 +2415,9 @@ MODULE_PARM_DESC(ptype, "SCSI peripheral type(def=0[disk])");
 MODULE_PARM_DESC(scsi_level, "SCSI level to simulate(def=5[SPC-3])");
 MODULE_PARM_DESC(virtual_gb, "virtual gigabyte size (def=0 -> use dev_size_mb)");
 MODULE_PARM_DESC(vpd_use_hostno, "0 -> dev ids ignore hostno (def=1 -> unique dev ids)");
-MODULE_PARM_DESC(sector_size, "hardware sector size in bytes (def=512)");
+MODULE_PARM_DESC(sector_size, "logical block size in bytes (def=512)");
+MODULE_PARM_DESC(physblk_exp, "physical block exponent (def=0)");
+MODULE_PARM_DESC(lowest_aligned, "lowest aligned lba (def=0)");
 MODULE_PARM_DESC(dix, "data integrity extensions mask (def=0)");
 MODULE_PARM_DESC(dif, "data integrity field type: 0-3 (def=0)");
 MODULE_PARM_DESC(guard, "protection checksum: 0=crc, 1=ip (def=0)");
@@ -2874,6 +2890,18 @@ static int __init scsi_debug_init(void)
 		return -EINVAL;
 	}
 
+	if (scsi_debug_physblk_exp > 15) {
+		printk(KERN_ERR "scsi_debug_init: invalid physblk_exp %u\n",
+		       scsi_debug_physblk_exp);
+		return -EINVAL;
+	}
+
+	if (scsi_debug_lowest_aligned > 0x3fff) {
+		printk(KERN_ERR "scsi_debug_init: lowest_aligned too big: %u\n",
+		       scsi_debug_lowest_aligned);
+		return -EINVAL;
+	}
+
 	if (scsi_debug_dev_size_mb < 1)
 		scsi_debug_dev_size_mb = 1;  /* force minimum 1 MB ramdisk */
 	sz = (unsigned long)scsi_debug_dev_size_mb * 1048576;
diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index 8821df9a277..93c2622cb96 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -24,6 +24,13 @@ struct scsi_dev_info_list {
 	unsigned compatible; /* for use with scsi_static_device_list entries */
 };
 
+struct scsi_dev_info_list_table {
+	struct list_head node;	/* our node for being on the master list */
+	struct list_head scsi_dev_info_list; /* head of dev info list */
+	const char *name;	/* name of list for /proc (NULL for global) */
+	int key;		/* unique numeric identifier */
+};
+
 
 static const char spaces[] = "                "; /* 16 of them */
 static unsigned scsi_default_dev_flags;
@@ -247,6 +254,22 @@ static struct {
 	{ NULL, NULL, NULL, 0 },
 };
 
+static struct scsi_dev_info_list_table *scsi_devinfo_lookup_by_key(int key)
+{
+	struct scsi_dev_info_list_table *devinfo_table;
+	int found = 0;
+
+	list_for_each_entry(devinfo_table, &scsi_dev_info_list, node)
+		if (devinfo_table->key == key) {
+			found = 1;
+			break;
+		}
+	if (!found)
+		return ERR_PTR(-EINVAL);
+
+	return devinfo_table;
+}
+
 /*
  * scsi_strcpy_devinfo: called from scsi_dev_info_list_add to copy into
  * devinfo vendor and model strings.
@@ -296,7 +319,38 @@ static void scsi_strcpy_devinfo(char *name, char *to, size_t to_length,
 static int scsi_dev_info_list_add(int compatible, char *vendor, char *model,
 			    char *strflags, int flags)
 {
+	return scsi_dev_info_list_add_keyed(compatible, vendor, model,
+					    strflags, flags,
+					    SCSI_DEVINFO_GLOBAL);
+}
+
+/**
+ * scsi_dev_info_list_add_keyed - add one dev_info list entry.
+ * @compatible: if true, null terminate short strings.  Otherwise space pad.
+ * @vendor:	vendor string
+ * @model:	model (product) string
+ * @strflags:	integer string
+ * @flags:	if strflags NULL, use this flag value
+ * @key:	specify list to use
+ *
+ * Description:
+ * 	Create and add one dev_info entry for @vendor, @model,
+ * 	@strflags or @flag in list specified by @key. If @compatible,
+ * 	add to the tail of the list, do not space pad, and set
+ * 	devinfo->compatible. The scsi_static_device_list entries are
+ * 	added with @compatible 1 and @clfags NULL.
+ *
+ * Returns: 0 OK, -error on failure.
+ **/
+int scsi_dev_info_list_add_keyed(int compatible, char *vendor, char *model,
+				 char *strflags, int flags, int key)
+{
 	struct scsi_dev_info_list *devinfo;
+	struct scsi_dev_info_list_table *devinfo_table =
+		scsi_devinfo_lookup_by_key(key);
+
+	if (IS_ERR(devinfo_table))
+		return PTR_ERR(devinfo_table);
 
 	devinfo = kmalloc(sizeof(*devinfo), GFP_KERNEL);
 	if (!devinfo) {
@@ -317,12 +371,15 @@ static int scsi_dev_info_list_add(int compatible, char *vendor, char *model,
 	devinfo->compatible = compatible;
 
 	if (compatible)
-		list_add_tail(&devinfo->dev_info_list, &scsi_dev_info_list);
+		list_add_tail(&devinfo->dev_info_list,
+			      &devinfo_table->scsi_dev_info_list);
 	else
-		list_add(&devinfo->dev_info_list, &scsi_dev_info_list);
+		list_add(&devinfo->dev_info_list,
+			 &devinfo_table->scsi_dev_info_list);
 
 	return 0;
 }
+EXPORT_SYMBOL(scsi_dev_info_list_add_keyed);
 
 /**
  * scsi_dev_info_list_add_str - parse dev_list and add to the scsi_dev_info_list.
@@ -382,22 +439,48 @@ static int scsi_dev_info_list_add_str(char *dev_list)
  * @model:	model name
  *
  * Description:
- *     Search the scsi_dev_info_list for an entry matching @vendor and
- *     @model, if found, return the matching flags value, else return
- *     the host or global default settings.  Called during scan time.
+ *     Search the global scsi_dev_info_list (specified by list zero)
+ *     for an entry matching @vendor and @model, if found, return the
+ *     matching flags value, else return the host or global default
+ *     settings.  Called during scan time.
  **/
 int scsi_get_device_flags(struct scsi_device *sdev,
 			  const unsigned char *vendor,
 			  const unsigned char *model)
 {
+	return scsi_get_device_flags_keyed(sdev, vendor, model,
+					   SCSI_DEVINFO_GLOBAL);
+}
+
+
+/**
+ * get_device_flags_keyed - get device specific flags from the dynamic device list.
+ * @sdev:       &scsi_device to get flags for
+ * @vendor:	vendor name
+ * @model:	model name
+ * @key:	list to look up
+ *
+ * Description:
+ *     Search the scsi_dev_info_list specified by @key for an entry
+ *     matching @vendor and @model, if found, return the matching
+ *     flags value, else return the host or global default settings.
+ *     Called during scan time.
+ **/
+int scsi_get_device_flags_keyed(struct scsi_device *sdev,
+				const unsigned char *vendor,
+				const unsigned char *model,
+				int key)
+{
 	struct scsi_dev_info_list *devinfo;
-	unsigned int bflags;
+	struct scsi_dev_info_list_table *devinfo_table;
+
+	devinfo_table = scsi_devinfo_lookup_by_key(key);
 
-	bflags = sdev->sdev_bflags;
-	if (!bflags)
-		bflags = scsi_default_dev_flags;
+	if (IS_ERR(devinfo_table))
+		return PTR_ERR(devinfo_table);
 
-	list_for_each_entry(devinfo, &scsi_dev_info_list, dev_info_list) {
+	list_for_each_entry(devinfo, &devinfo_table->scsi_dev_info_list,
+			    dev_info_list) {
 		if (devinfo->compatible) {
 			/*
 			 * Behave like the older version of get_device_flags.
@@ -447,32 +530,89 @@ int scsi_get_device_flags(struct scsi_device *sdev,
 				return devinfo->flags;
 		}
 	}
-	return bflags;
+	/* nothing found, return nothing */
+	if (key != SCSI_DEVINFO_GLOBAL)
+		return 0;
+
+	/* except for the global list, where we have an exception */
+	if (sdev->sdev_bflags)
+		return sdev->sdev_bflags;
+
+	return scsi_default_dev_flags;
 }
+EXPORT_SYMBOL(scsi_get_device_flags_keyed);
 
 #ifdef CONFIG_SCSI_PROC_FS
+struct double_list {
+	struct list_head *top;
+	struct list_head *bottom;
+};
+
 static int devinfo_seq_show(struct seq_file *m, void *v)
 {
+	struct double_list *dl = v;
+	struct scsi_dev_info_list_table *devinfo_table =
+		list_entry(dl->top, struct scsi_dev_info_list_table, node);
 	struct scsi_dev_info_list *devinfo =
-		list_entry(v, struct scsi_dev_info_list, dev_info_list);
+		list_entry(dl->bottom, struct scsi_dev_info_list,
+			   dev_info_list);
+
+	if (devinfo_table->scsi_dev_info_list.next == dl->bottom &&
+	    devinfo_table->name)
+		seq_printf(m, "[%s]:\n", devinfo_table->name);
 
 	seq_printf(m, "'%.8s' '%.16s' 0x%x\n",
-			devinfo->vendor, devinfo->model, devinfo->flags);
+		   devinfo->vendor, devinfo->model, devinfo->flags);
 	return 0;
 }
 
-static void * devinfo_seq_start(struct seq_file *m, loff_t *pos)
+static void *devinfo_seq_start(struct seq_file *m, loff_t *ppos)
 {
-	return seq_list_start(&scsi_dev_info_list, *pos);
+	struct double_list *dl = kmalloc(sizeof(*dl), GFP_KERNEL);
+	loff_t pos = *ppos;
+
+	if (!dl)
+		return NULL;
+
+	list_for_each(dl->top, &scsi_dev_info_list) {
+		struct scsi_dev_info_list_table *devinfo_table =
+			list_entry(dl->top, struct scsi_dev_info_list_table,
+				   node);
+		list_for_each(dl->bottom, &devinfo_table->scsi_dev_info_list)
+			if (pos-- == 0)
+				return dl;
+	}
+
+	kfree(dl);
+	return NULL;
 }
 
-static void * devinfo_seq_next(struct seq_file *m, void *v, loff_t *pos)
+static void *devinfo_seq_next(struct seq_file *m, void *v, loff_t *ppos)
 {
-	return seq_list_next(v, &scsi_dev_info_list, pos);
+	struct double_list *dl = v;
+	struct scsi_dev_info_list_table *devinfo_table =
+		list_entry(dl->top, struct scsi_dev_info_list_table, node);
+
+	++*ppos;
+	dl->bottom = dl->bottom->next;
+	while (&devinfo_table->scsi_dev_info_list == dl->bottom) {
+		dl->top = dl->top->next;
+		if (dl->top == &scsi_dev_info_list) {
+			kfree(dl);
+			return NULL;
+		}
+		devinfo_table = list_entry(dl->top,
+					   struct scsi_dev_info_list_table,
+					   node);
+		dl->bottom = devinfo_table->scsi_dev_info_list.next;
+	}
+
+	return dl;
 }
 
 static void devinfo_seq_stop(struct seq_file *m, void *v)
 {
+	kfree(v);
 }
 
 static const struct seq_operations scsi_devinfo_seq_ops = {
@@ -549,19 +689,78 @@ MODULE_PARM_DESC(default_dev_flags,
  **/
 void scsi_exit_devinfo(void)
 {
-	struct list_head *lh, *lh_next;
-	struct scsi_dev_info_list *devinfo;
-
 #ifdef CONFIG_SCSI_PROC_FS
 	remove_proc_entry("scsi/device_info", NULL);
 #endif
 
-	list_for_each_safe(lh, lh_next, &scsi_dev_info_list) {
+	scsi_dev_info_remove_list(SCSI_DEVINFO_GLOBAL);
+}
+
+/**
+ * scsi_dev_info_add_list - add a new devinfo list
+ * @key:	key of the list to add
+ * @name:	Name of the list to add (for /proc/scsi/device_info)
+ *
+ * Adds the requested list, returns zero on success, -EEXIST if the
+ * key is already registered to a list, or other error on failure.
+ */
+int scsi_dev_info_add_list(int key, const char *name)
+{
+	struct scsi_dev_info_list_table *devinfo_table =
+		scsi_devinfo_lookup_by_key(key);
+
+	if (!IS_ERR(devinfo_table))
+		/* list already exists */
+		return -EEXIST;
+
+	devinfo_table = kmalloc(sizeof(*devinfo_table), GFP_KERNEL);
+
+	if (!devinfo_table)
+		return -ENOMEM;
+
+	INIT_LIST_HEAD(&devinfo_table->node);
+	INIT_LIST_HEAD(&devinfo_table->scsi_dev_info_list);
+	devinfo_table->name = name;
+	devinfo_table->key = key;
+	list_add_tail(&devinfo_table->node, &scsi_dev_info_list);
+
+	return 0;
+}
+EXPORT_SYMBOL(scsi_dev_info_add_list);
+
+/**
+ * scsi_dev_info_remove_list - destroy an added devinfo list
+ * @key: key of the list to destroy
+ *
+ * Iterates over the entire list first, freeing all the values, then
+ * frees the list itself.  Returns 0 on success or -EINVAL if the key
+ * can't be found.
+ */
+int scsi_dev_info_remove_list(int key)
+{
+	struct list_head *lh, *lh_next;
+	struct scsi_dev_info_list_table *devinfo_table =
+		scsi_devinfo_lookup_by_key(key);
+
+	if (IS_ERR(devinfo_table))
+		/* no such list */
+		return -EINVAL;
+
+	/* remove from the master list */
+	list_del(&devinfo_table->node);
+
+	list_for_each_safe(lh, lh_next, &devinfo_table->scsi_dev_info_list) {
+		struct scsi_dev_info_list *devinfo;
+
 		devinfo = list_entry(lh, struct scsi_dev_info_list,
 				     dev_info_list);
 		kfree(devinfo);
 	}
+	kfree(devinfo_table);
+
+	return 0;
 }
+EXPORT_SYMBOL(scsi_dev_info_remove_list);
 
 /**
  * scsi_init_devinfo - set up the dynamic device list.
@@ -577,10 +776,14 @@ int __init scsi_init_devinfo(void)
 #endif
 	int error, i;
 
-	error = scsi_dev_info_list_add_str(scsi_dev_flags);
+	error = scsi_dev_info_add_list(SCSI_DEVINFO_GLOBAL, NULL);
 	if (error)
 		return error;
 
+	error = scsi_dev_info_list_add_str(scsi_dev_flags);
+	if (error)
+		goto out;
+
 	for (i = 0; scsi_static_device_list[i].vendor; i++) {
 		error = scsi_dev_info_list_add(1 /* compatibile */,
 				scsi_static_device_list[i].vendor,
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 30f3275e119..f3c40898fc7 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1207,6 +1207,7 @@ int scsi_prep_fn(struct request_queue *q, struct request *req)
 		ret = scsi_setup_blk_pc_cmnd(sdev, req);
 	return scsi_prep_return(q, req, ret);
 }
+EXPORT_SYMBOL(scsi_prep_fn);
 
 /*
  * scsi_dev_queue_ready: if we can send requests to sdev, return 1 else
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index fbc83bebdd8..021e503c8c4 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -39,9 +39,25 @@ static inline void scsi_log_completion(struct scsi_cmnd *cmd, int disposition)
 #endif
 
 /* scsi_devinfo.c */
+
+/* list of keys for the lists */
+enum {
+	SCSI_DEVINFO_GLOBAL = 0,
+	SCSI_DEVINFO_SPI,
+};
+
 extern int scsi_get_device_flags(struct scsi_device *sdev,
 				 const unsigned char *vendor,
 				 const unsigned char *model);
+extern int scsi_get_device_flags_keyed(struct scsi_device *sdev,
+				       const unsigned char *vendor,
+				       const unsigned char *model, int key);
+extern int scsi_dev_info_list_add_keyed(int compatible, char *vendor,
+					char *model, char *strflags,
+					int flags, int key);
+extern int scsi_dev_info_add_list(int key, const char *name);
+extern int scsi_dev_info_remove_list(int key);
+
 extern int __init scsi_init_devinfo(void);
 extern void scsi_exit_devinfo(void);
 
@@ -71,7 +87,6 @@ extern int scsi_init_queue(void);
 extern void scsi_exit_queue(void);
 struct request_queue;
 struct request;
-extern int scsi_prep_fn(struct request_queue *, struct request *);
 extern struct kmem_cache *scsi_sdb_cache;
 
 /* scsi_proc.c */
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index fa4711d1274..91482f2dcc5 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -420,29 +420,12 @@ static int scsi_bus_resume(struct device * dev)
 	return err;
 }
 
-static int scsi_bus_remove(struct device *dev)
-{
-	struct device_driver *drv = dev->driver;
-	struct scsi_device *sdev = to_scsi_device(dev);
-	int err = 0;
-
-	/* reset the prep_fn back to the default since the
-	 * driver may have altered it and it's being removed */
-	blk_queue_prep_rq(sdev->request_queue, scsi_prep_fn);
-
-	if (drv && drv->remove)
-		err = drv->remove(dev);
-
-	return 0;
-}
-
 struct bus_type scsi_bus_type = {
         .name		= "scsi",
         .match		= scsi_bus_match,
 	.uevent		= scsi_bus_uevent,
 	.suspend	= scsi_bus_suspend,
 	.resume		= scsi_bus_resume,
-	.remove		= scsi_bus_remove,
 };
 EXPORT_SYMBOL_GPL(scsi_bus_type);
 
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 3f64d93b6c8..2eee9e6e4fe 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -3397,7 +3397,6 @@ fc_destroy_bsgjob(struct fc_bsg_job *job)
 	kfree(job);
 }
 
-
 /**
  * fc_bsg_jobdone - completion routine for bsg requests that the LLD has
  *                  completed
@@ -3408,15 +3407,10 @@ fc_bsg_jobdone(struct fc_bsg_job *job)
 {
 	struct request *req = job->req;
 	struct request *rsp = req->next_rq;
-	unsigned long flags;
 	int err;
 
-	spin_lock_irqsave(&job->job_lock, flags);
-	job->state_flags |= FC_RQST_STATE_DONE;
-	job->ref_cnt--;
-	spin_unlock_irqrestore(&job->job_lock, flags);
-
 	err = job->req->errors = job->reply->result;
+
 	if (err < 0)
 		/* we're only returning the result field in the reply */
 		job->req->sense_len = sizeof(uint32_t);
@@ -3433,13 +3427,27 @@ fc_bsg_jobdone(struct fc_bsg_job *job)
 		rsp->resid_len -= min(job->reply->reply_payload_rcv_len,
 				      rsp->resid_len);
 	}
+	blk_complete_request(req);
+}
 
-	blk_end_request_all(req, err);
+/**
+ * fc_bsg_softirq_done - softirq done routine for destroying the bsg requests
+ * @req:        BSG request that holds the job to be destroyed
+ */
+static void fc_bsg_softirq_done(struct request *rq)
+{
+	struct fc_bsg_job *job = rq->special;
+	unsigned long flags;
 
+	spin_lock_irqsave(&job->job_lock, flags);
+	job->state_flags |= FC_RQST_STATE_DONE;
+	job->ref_cnt--;
+	spin_unlock_irqrestore(&job->job_lock, flags);
+
+	blk_end_request_all(rq, rq->errors);
 	fc_destroy_bsgjob(job);
 }
 
-
 /**
  * fc_bsg_job_timeout - handler for when a bsg request timesout
  * @req:	request that timed out
@@ -3471,19 +3479,13 @@ fc_bsg_job_timeout(struct request *req)
 				"abort failed with status %d\n", err);
 	}
 
-	if (!done) {
-		spin_lock_irqsave(&job->job_lock, flags);
-		job->ref_cnt--;
-		spin_unlock_irqrestore(&job->job_lock, flags);
-		fc_destroy_bsgjob(job);
-	}
-
 	/* the blk_end_sync_io() doesn't check the error */
-	return BLK_EH_HANDLED;
+	if (done)
+		return BLK_EH_NOT_HANDLED;
+	else
+		return BLK_EH_HANDLED;
 }
 
-
-
 static int
 fc_bsg_map_buffer(struct fc_bsg_buffer *buf, struct request *req)
 {
@@ -3859,7 +3861,7 @@ fc_bsg_hostadd(struct Scsi_Host *shost, struct fc_host_attrs *fc_host)
 	struct fc_internal *i = to_fc_internal(shost->transportt);
 	struct request_queue *q;
 	int err;
-	char bsg_name[BUS_ID_SIZE]; /*20*/
+	char bsg_name[20];
 
 	fc_host->rqst_q = NULL;
 
@@ -3879,6 +3881,7 @@ fc_bsg_hostadd(struct Scsi_Host *shost, struct fc_host_attrs *fc_host)
 
 	q->queuedata = shost;
 	queue_flag_set_unlocked(QUEUE_FLAG_BIDI, q);
+	blk_queue_softirq_done(q, fc_bsg_softirq_done);
 	blk_queue_rq_timed_out(q, fc_bsg_job_timeout);
 	blk_queue_rq_timeout(q, FC_DEFAULT_BSG_TIMEOUT);
 
@@ -3924,6 +3927,7 @@ fc_bsg_rportadd(struct Scsi_Host *shost, struct fc_rport *rport)
 
 	q->queuedata = rport;
 	queue_flag_set_unlocked(QUEUE_FLAG_BIDI, q);
+	blk_queue_softirq_done(q, fc_bsg_softirq_done);
 	blk_queue_rq_timed_out(q, fc_bsg_job_timeout);
 	blk_queue_rq_timeout(q, BLK_DEFAULT_SG_TIMEOUT);
 
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index f3e664628d7..783e33c65eb 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -692,6 +692,7 @@ int iscsi_add_session(struct iscsi_cls_session *session, unsigned int target_id)
 						 "Too many iscsi targets. Max "
 						 "number of targets is %d.\n",
 						 ISCSI_MAX_TARGET - 1);
+			err = -EOVERFLOW;
 			goto release_host;
 		}
 	}
diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index d606452297c..0895d3c71b0 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -173,9 +173,9 @@ static void sas_smp_request(struct request_queue *q, struct Scsi_Host *shost,
 		ret = handler(shost, rphy, req);
 		req->errors = ret;
 
-		spin_lock_irq(q->queue_lock);
+		blk_end_request_all(req, ret);
 
-		req->end_io(req, ret);
+		spin_lock_irq(q->queue_lock);
 	}
 }
 
diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
index 654a34fb04c..c25bd9a34e0 100644
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -46,6 +46,22 @@
 #define DV_RETRIES	3	/* should only need at most 
 				 * two cc/ua clears */
 
+/* Our blacklist flags */
+enum {
+	SPI_BLIST_NOIUS = 0x1,
+};
+
+/* blacklist table, modelled on scsi_devinfo.c */
+static struct {
+	char *vendor;
+	char *model;
+	unsigned flags;
+} spi_static_device_list[] __initdata = {
+	{"HP", "Ultrium 3-SCSI", SPI_BLIST_NOIUS },
+	{"IBM", "ULTRIUM-TD3", SPI_BLIST_NOIUS },
+	{NULL, NULL, 0}
+};
+
 /* Private data accessors (keep these out of the header file) */
 #define spi_dv_in_progress(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_in_progress)
 #define spi_dv_mutex(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_mutex)
@@ -207,6 +223,9 @@ static int spi_device_configure(struct transport_container *tc,
 {
 	struct scsi_device *sdev = to_scsi_device(dev);
 	struct scsi_target *starget = sdev->sdev_target;
+	unsigned bflags = scsi_get_device_flags_keyed(sdev, &sdev->inquiry[8],
+						      &sdev->inquiry[16],
+						      SCSI_DEVINFO_SPI);
 
 	/* Populate the target capability fields with the values
 	 * gleaned from the device inquiry */
@@ -216,6 +235,10 @@ static int spi_device_configure(struct transport_container *tc,
 	spi_support_dt(starget) = scsi_device_dt(sdev);
 	spi_support_dt_only(starget) = scsi_device_dt_only(sdev);
 	spi_support_ius(starget) = scsi_device_ius(sdev);
+	if (bflags & SPI_BLIST_NOIUS) {
+		dev_info(dev, "Information Units disabled by blacklist\n");
+		spi_support_ius(starget) = 0;
+	}
 	spi_support_qas(starget) = scsi_device_qas(sdev);
 
 	return 0;
@@ -833,7 +856,7 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer)
 		return;
 	}
 
-	if (!scsi_device_wide(sdev)) {
+	if (!spi_support_wide(starget)) {
 		spi_max_width(starget) = 0;
 		max_width = 0;
 	}
@@ -860,7 +883,7 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer)
 		return;
 
 	/* device can't handle synchronous */
-	if (!scsi_device_sync(sdev) && !scsi_device_dt(sdev))
+	if (!spi_support_sync(starget) && !spi_support_dt(starget))
 		return;
 
 	/* len == -1 is the signal that we need to ascertain the
@@ -876,13 +899,14 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer)
 
 	/* try QAS requests; this should be harmless to set if the
 	 * target supports it */
-	if (scsi_device_qas(sdev) && spi_max_qas(starget)) {
+	if (spi_support_qas(starget) && spi_max_qas(starget)) {
 		DV_SET(qas, 1);
 	} else {
 		DV_SET(qas, 0);
 	}
 
-	if (scsi_device_ius(sdev) && spi_max_iu(starget) && min_period < 9) {
+	if (spi_support_ius(starget) && spi_max_iu(starget) &&
+	    min_period < 9) {
 		/* This u320 (or u640). Set IU transfers */
 		DV_SET(iu, 1);
 		/* Then set the optional parameters */
@@ -902,7 +926,7 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer)
 		i->f->get_signalling(shost);
 	if (spi_signalling(shost) == SPI_SIGNAL_SE ||
 	    spi_signalling(shost) == SPI_SIGNAL_HVD ||
-	    !scsi_device_dt(sdev)) {
+	    !spi_support_dt(starget)) {
 		DV_SET(dt, 0);
 	} else {
 		DV_SET(dt, 1);
@@ -1523,7 +1547,21 @@ EXPORT_SYMBOL(spi_release_transport);
 
 static __init int spi_transport_init(void)
 {
-	int error = transport_class_register(&spi_transport_class);
+	int error = scsi_dev_info_add_list(SCSI_DEVINFO_SPI,
+					   "SCSI Parallel Transport Class");
+	if (!error) {
+		int i;
+
+		for (i = 0; spi_static_device_list[i].vendor; i++)
+			scsi_dev_info_list_add_keyed(1,	/* compatible */
+						     spi_static_device_list[i].vendor,
+						     spi_static_device_list[i].model,
+						     NULL,
+						     spi_static_device_list[i].flags,
+						     SCSI_DEVINFO_SPI);
+	}
+
+	error = transport_class_register(&spi_transport_class);
 	if (error)
 		return error;
 	error = anon_transport_class_register(&spi_device_class);
@@ -1535,6 +1573,7 @@ static void __exit spi_transport_exit(void)
 	transport_class_unregister(&spi_transport_class);
 	anon_transport_class_unregister(&spi_device_class);
 	transport_class_unregister(&spi_host_class);
+	scsi_dev_info_remove_list(SCSI_DEVINFO_SPI);
 }
 
 MODULE_AUTHOR("Martin Hicks");
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 878b17a9af3..5616cd780ff 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1307,6 +1307,7 @@ static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp,
 	int sense_valid = 0;
 	int the_result;
 	int retries = 3;
+	unsigned int alignment;
 	unsigned long long lba;
 	unsigned sector_size;
 
@@ -1358,6 +1359,16 @@ static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp,
 		return -EOVERFLOW;
 	}
 
+	/* Logical blocks per physical block exponent */
+	sdkp->hw_sector_size = (1 << (buffer[13] & 0xf)) * sector_size;
+
+	/* Lowest aligned logical block */
+	alignment = ((buffer[14] & 0x3f) << 8 | buffer[15]) * sector_size;
+	blk_queue_alignment_offset(sdp->request_queue, alignment);
+	if (alignment && sdkp->first_scan)
+		sd_printk(KERN_NOTICE, sdkp,
+			  "physical block alignment offset: %u\n", alignment);
+
 	sdkp->capacity = lba + 1;
 	return sector_size;
 }
@@ -1409,6 +1420,7 @@ static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp,
 	}
 
 	sdkp->capacity = lba + 1;
+	sdkp->hw_sector_size = sector_size;
 	return sector_size;
 }
 
@@ -1521,11 +1533,17 @@ got_data:
 		string_get_size(sz, STRING_UNITS_10, cap_str_10,
 				sizeof(cap_str_10));
 
-		if (sdkp->first_scan || old_capacity != sdkp->capacity)
+		if (sdkp->first_scan || old_capacity != sdkp->capacity) {
 			sd_printk(KERN_NOTICE, sdkp,
-				  "%llu %d-byte hardware sectors: (%s/%s)\n",
+				  "%llu %d-byte logical blocks: (%s/%s)\n",
 				  (unsigned long long)sdkp->capacity,
 				  sector_size, cap_str_10, cap_str_2);
+
+			if (sdkp->hw_sector_size != sector_size)
+				sd_printk(KERN_NOTICE, sdkp,
+					  "%u-byte physical blocks\n",
+					  sdkp->hw_sector_size);
+		}
 	}
 
 	/* Rescale capacity to 512-byte units */
@@ -1538,6 +1556,7 @@ got_data:
 	else if (sector_size == 256)
 		sdkp->capacity >>= 1;
 
+	blk_queue_physical_block_size(sdp->request_queue, sdkp->hw_sector_size);
 	sdkp->device->sector_size = sector_size;
 }
 
@@ -1776,6 +1795,52 @@ void sd_read_app_tag_own(struct scsi_disk *sdkp, unsigned char *buffer)
 }
 
 /**
+ * sd_read_block_limits - Query disk device for preferred I/O sizes.
+ * @disk: disk to query
+ */
+static void sd_read_block_limits(struct scsi_disk *sdkp)
+{
+	unsigned int sector_sz = sdkp->device->sector_size;
+	char *buffer;
+
+	/* Block Limits VPD */
+	buffer = scsi_get_vpd_page(sdkp->device, 0xb0);
+
+	if (buffer == NULL)
+		return;
+
+	blk_queue_io_min(sdkp->disk->queue,
+			 get_unaligned_be16(&buffer[6]) * sector_sz);
+	blk_queue_io_opt(sdkp->disk->queue,
+			 get_unaligned_be32(&buffer[12]) * sector_sz);
+
+	kfree(buffer);
+}
+
+/**
+ * sd_read_block_characteristics - Query block dev. characteristics
+ * @disk: disk to query
+ */
+static void sd_read_block_characteristics(struct scsi_disk *sdkp)
+{
+	char *buffer;
+	u16 rot;
+
+	/* Block Device Characteristics VPD */
+	buffer = scsi_get_vpd_page(sdkp->device, 0xb1);
+
+	if (buffer == NULL)
+		return;
+
+	rot = get_unaligned_be16(&buffer[4]);
+
+	if (rot == 1)
+		queue_flag_set_unlocked(QUEUE_FLAG_NONROT, sdkp->disk->queue);
+
+	kfree(buffer);
+}
+
+/**
  *	sd_revalidate_disk - called the first time a new disk is seen,
  *	performs disk spin up, read_capacity, etc.
  *	@disk: struct gendisk we care about
@@ -1812,6 +1877,8 @@ static int sd_revalidate_disk(struct gendisk *disk)
 	 */
 	if (sdkp->media_present) {
 		sd_read_capacity(sdkp, buffer);
+		sd_read_block_limits(sdkp);
+		sd_read_block_characteristics(sdkp);
 		sd_read_write_protect_flag(sdkp, buffer);
 		sd_read_cache_type(sdkp, buffer);
 		sd_read_app_tag_own(sdkp, buffer);
@@ -1934,6 +2001,8 @@ static void sd_probe_async(void *data, async_cookie_t cookie)
 	add_disk(gd);
 	sd_dif_config_host(sdkp);
 
+	sd_revalidate_disk(gd);
+
 	sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
 		  sdp->removable ? "removable " : "");
 }
@@ -2054,6 +2123,7 @@ static int sd_remove(struct device *dev)
 
 	async_synchronize_full();
 	sdkp = dev_get_drvdata(dev);
+	blk_queue_prep_rq(sdkp->device->request_queue, scsi_prep_fn);
 	device_del(&sdkp->dev);
 	del_gendisk(sdkp->disk);
 	sd_shutdown(dev);
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index 708778cf5f0..8474b5bad3f 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -45,6 +45,7 @@ struct scsi_disk {
 	unsigned int	openers;	/* protected by BKL for now, yuck */
 	sector_t	capacity;	/* size in 512-byte sectors */
 	u32		index;
+	unsigned short	hw_sector_size;
 	u8		media_present;
 	u8		write_prot;
 	u8		protection_type;/* Data Integrity Field */
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index cd350dfc121..cce0fe4c8a3 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -881,6 +881,7 @@ static int sr_remove(struct device *dev)
 {
 	struct scsi_cd *cd = dev_get_drvdata(dev);
 
+	blk_queue_prep_rq(cd->device->request_queue, scsi_prep_fn);
 	del_gendisk(cd->disk);
 
 	mutex_lock(&sr_ref_mutex);
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c
index 69ad4945c93..297deb817a5 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -2321,8 +2321,9 @@ static void sym_int_par (struct sym_hcb *np, u_short sist)
 	int phase	= cmd & 7;
 	struct sym_ccb *cp	= sym_ccb_from_dsa(np, dsa);
 
-	printf("%s: SCSI parity error detected: SCR1=%d DBC=%x SBCL=%x\n",
-		sym_name(np), hsts, dbc, sbcl);
+	if (printk_ratelimit())
+		printf("%s: SCSI parity error detected: SCR1=%d DBC=%x SBCL=%x\n",
+			sym_name(np), hsts, dbc, sbcl);
 
 	/*
 	 *  Check that the chip is connected to the SCSI BUS.
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 1132c5cae7a..037c1e0b7c4 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1320,6 +1320,16 @@ config SERIAL_SGI_IOC3
 	  If you have an SGI Altix with an IOC3 serial card,
 	  say Y or M.  Otherwise, say N.
 
+config SERIAL_MSM
+	bool "MSM on-chip serial port support"
+	depends on ARM && ARCH_MSM
+	select SERIAL_CORE
+
+config SERIAL_MSM_CONSOLE
+	bool "MSM serial console support"
+	depends on SERIAL_MSM=y
+	select SERIAL_CORE_CONSOLE
+
 config SERIAL_NETX
 	tristate "NetX serial port support"
 	depends on ARM && ARCH_NETX
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 45a8658f54d..d5a29981c6c 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -71,6 +71,7 @@ obj-$(CONFIG_SERIAL_SGI_IOC4) += ioc4_serial.o
 obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o
 obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
 obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
+obj-$(CONFIG_SERIAL_MSM) += msm_serial.o
 obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
 obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
 obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index e2f6b1bfac9..b4a7650af69 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -38,6 +38,10 @@
 #include <asm/cacheflush.h>
 #endif
 
+#ifdef CONFIG_SERIAL_BFIN_MODULE
+# undef CONFIG_EARLY_PRINTK
+#endif
+
 /* UART name and device definitions */
 #define BFIN_SERIAL_NAME	"ttyBF"
 #define BFIN_SERIAL_MAJOR	204
@@ -1110,6 +1114,7 @@ static void __init bfin_serial_init_ports(void)
 	bfin_serial_hw_init();
 
 	for (i = 0; i < nr_active_ports; i++) {
+		spin_lock_init(&bfin_serial_ports[i].port.lock);
 		bfin_serial_ports[i].port.uartclk   = get_sclk();
 		bfin_serial_ports[i].port.fifosize  = BFIN_UART_TX_FIFO_SIZE;
 		bfin_serial_ports[i].port.ops       = &bfin_serial_pops;
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index b3feb6198d5..abbd146c50d 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -76,7 +76,6 @@
 #include <linux/of_platform.h>
 
 #include <asm/mpc52xx.h>
-#include <asm/mpc512x.h>
 #include <asm/mpc52xx_psc.h>
 
 #if defined(CONFIG_SERIAL_MPC52xx_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
@@ -254,7 +253,7 @@ static unsigned long mpc52xx_getuartclk(void *p)
 	 * but the generic serial code assumes 16
 	 * so return ipb freq / 2
 	 */
-	return mpc52xx_find_ipb_freq(p) / 2;
+	return mpc5xxx_get_bus_frequency(p) / 2;
 }
 
 static struct psc_ops mpc52xx_psc_ops = {
@@ -391,7 +390,7 @@ static void mpc512x_psc_cw_restore_ints(struct uart_port *port)
 
 static unsigned long mpc512x_getuartclk(void *p)
 {
-	return mpc512x_find_ips_freq(p);
+	return mpc5xxx_get_bus_frequency(p);
 }
 
 static struct psc_ops mpc512x_psc_ops = {
diff --git a/drivers/serial/msm_serial.c b/drivers/serial/msm_serial.c
new file mode 100644
index 00000000000..698048f64f5
--- /dev/null
+++ b/drivers/serial/msm_serial.c
@@ -0,0 +1,772 @@
+/*
+ * drivers/serial/msm_serial.c - driver for msm7k serial device and console
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Robert Love <rlove@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#if defined(CONFIG_SERIAL_MSM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+# define SUPPORT_SYSRQ
+#endif
+
+#include <linux/hrtimer.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include "msm_serial.h"
+
+struct msm_port {
+	struct uart_port	uart;
+	char			name[16];
+	struct clk		*clk;
+	unsigned int		imr;
+};
+
+#define UART_TO_MSM(uart_port)	((struct msm_port *) uart_port)
+
+static inline void msm_write(struct uart_port *port, unsigned int val,
+			     unsigned int off)
+{
+	__raw_writel(val, port->membase + off);
+}
+
+static inline unsigned int msm_read(struct uart_port *port, unsigned int off)
+{
+	return __raw_readl(port->membase + off);
+}
+
+static void msm_stop_tx(struct uart_port *port)
+{
+	struct msm_port *msm_port = UART_TO_MSM(port);
+
+	msm_port->imr &= ~UART_IMR_TXLEV;
+	msm_write(port, msm_port->imr, UART_IMR);
+}
+
+static void msm_start_tx(struct uart_port *port)
+{
+	struct msm_port *msm_port = UART_TO_MSM(port);
+
+	msm_port->imr |= UART_IMR_TXLEV;
+	msm_write(port, msm_port->imr, UART_IMR);
+}
+
+static void msm_stop_rx(struct uart_port *port)
+{
+	struct msm_port *msm_port = UART_TO_MSM(port);
+
+	msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE);
+	msm_write(port, msm_port->imr, UART_IMR);
+}
+
+static void msm_enable_ms(struct uart_port *port)
+{
+	struct msm_port *msm_port = UART_TO_MSM(port);
+
+	msm_port->imr |= UART_IMR_DELTA_CTS;
+	msm_write(port, msm_port->imr, UART_IMR);
+}
+
+static void handle_rx(struct uart_port *port)
+{
+	struct tty_struct *tty = port->info->port.tty;
+	unsigned int sr;
+
+	/*
+	 * Handle overrun. My understanding of the hardware is that overrun
+	 * is not tied to the RX buffer, so we handle the case out of band.
+	 */
+	if ((msm_read(port, UART_SR) & UART_SR_OVERRUN)) {
+		port->icount.overrun++;
+		tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+		msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
+	}
+
+	/* and now the main RX loop */
+	while ((sr = msm_read(port, UART_SR)) & UART_SR_RX_READY) {
+		unsigned int c;
+		char flag = TTY_NORMAL;
+
+		c = msm_read(port, UART_RF);
+
+		if (sr & UART_SR_RX_BREAK) {
+			port->icount.brk++;
+			if (uart_handle_break(port))
+				continue;
+		} else if (sr & UART_SR_PAR_FRAME_ERR) {
+			port->icount.frame++;
+		} else {
+			port->icount.rx++;
+		}
+
+		/* Mask conditions we're ignorning. */
+		sr &= port->read_status_mask;
+
+		if (sr & UART_SR_RX_BREAK) {
+			flag = TTY_BREAK;
+		} else if (sr & UART_SR_PAR_FRAME_ERR) {
+			flag = TTY_FRAME;
+		}
+
+		if (!uart_handle_sysrq_char(port, c))
+			tty_insert_flip_char(tty, c, flag);
+	}
+
+	tty_flip_buffer_push(tty);
+}
+
+static void handle_tx(struct uart_port *port)
+{
+	struct circ_buf *xmit = &port->info->xmit;
+	struct msm_port *msm_port = UART_TO_MSM(port);
+	int sent_tx;
+
+	if (port->x_char) {
+		msm_write(port, port->x_char, UART_TF);
+		port->icount.tx++;
+		port->x_char = 0;
+	}
+
+	while (msm_read(port, UART_SR) & UART_SR_TX_READY) {
+		if (uart_circ_empty(xmit)) {
+			/* disable tx interrupts */
+			msm_port->imr &= ~UART_IMR_TXLEV;
+			msm_write(port, msm_port->imr, UART_IMR);
+			break;
+		}
+
+		msm_write(port, xmit->buf[xmit->tail], UART_TF);
+
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+		sent_tx = 1;
+	}
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+}
+
+static void handle_delta_cts(struct uart_port *port)
+{
+	msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
+	port->icount.cts++;
+	wake_up_interruptible(&port->info->delta_msr_wait);
+}
+
+static irqreturn_t msm_irq(int irq, void *dev_id)
+{
+	struct uart_port *port = dev_id;
+	struct msm_port *msm_port = UART_TO_MSM(port);
+	unsigned int misr;
+
+	spin_lock(&port->lock);
+	misr = msm_read(port, UART_MISR);
+	msm_write(port, 0, UART_IMR); /* disable interrupt */
+
+	if (misr & (UART_IMR_RXLEV | UART_IMR_RXSTALE))
+		handle_rx(port);
+	if (misr & UART_IMR_TXLEV)
+		handle_tx(port);
+	if (misr & UART_IMR_DELTA_CTS)
+		handle_delta_cts(port);
+
+	msm_write(port, msm_port->imr, UART_IMR); /* restore interrupt */
+	spin_unlock(&port->lock);
+
+	return IRQ_HANDLED;
+}
+
+static unsigned int msm_tx_empty(struct uart_port *port)
+{
+	return (msm_read(port, UART_SR) & UART_SR_TX_EMPTY) ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int msm_get_mctrl(struct uart_port *port)
+{
+	return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR | TIOCM_RTS;
+}
+
+static void msm_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	unsigned int mr;
+
+	mr = msm_read(port, UART_MR1);
+
+	if (!(mctrl & TIOCM_RTS)) {
+		mr &= ~UART_MR1_RX_RDY_CTL;
+		msm_write(port, mr, UART_MR1);
+		msm_write(port, UART_CR_CMD_RESET_RFR, UART_CR);
+	} else {
+		mr |= UART_MR1_RX_RDY_CTL;
+		msm_write(port, mr, UART_MR1);
+	}
+}
+
+static void msm_break_ctl(struct uart_port *port, int break_ctl)
+{
+	if (break_ctl)
+		msm_write(port, UART_CR_CMD_START_BREAK, UART_CR);
+	else
+		msm_write(port, UART_CR_CMD_STOP_BREAK, UART_CR);
+}
+
+static int msm_set_baud_rate(struct uart_port *port, unsigned int baud)
+{
+	unsigned int baud_code, rxstale, watermark;
+
+	switch (baud) {
+	case 300:
+		baud_code = UART_CSR_300;
+		rxstale = 1;
+		break;
+	case 600:
+		baud_code = UART_CSR_600;
+		rxstale = 1;
+		break;
+	case 1200:
+		baud_code = UART_CSR_1200;
+		rxstale = 1;
+		break;
+	case 2400:
+		baud_code = UART_CSR_2400;
+		rxstale = 1;
+		break;
+	case 4800:
+		baud_code = UART_CSR_4800;
+		rxstale = 1;
+		break;
+	case 9600:
+		baud_code = UART_CSR_9600;
+		rxstale = 2;
+		break;
+	case 14400:
+		baud_code = UART_CSR_14400;
+		rxstale = 3;
+		break;
+	case 19200:
+		baud_code = UART_CSR_19200;
+		rxstale = 4;
+		break;
+	case 28800:
+		baud_code = UART_CSR_28800;
+		rxstale = 6;
+		break;
+	case 38400:
+		baud_code = UART_CSR_38400;
+		rxstale = 8;
+		break;
+	case 57600:
+		baud_code = UART_CSR_57600;
+		rxstale = 16;
+		break;
+	case 115200:
+	default:
+		baud_code = UART_CSR_115200;
+		baud = 115200;
+		rxstale = 31;
+		break;
+	}
+
+	msm_write(port, baud_code, UART_CSR);
+
+	/* RX stale watermark */
+	watermark = UART_IPR_STALE_LSB & rxstale;
+	watermark |= UART_IPR_RXSTALE_LAST;
+	watermark |= UART_IPR_STALE_TIMEOUT_MSB & (rxstale << 2);
+	msm_write(port, watermark, UART_IPR);
+
+	/* set RX watermark */
+	watermark = (port->fifosize * 3) / 4;
+	msm_write(port, watermark, UART_RFWR);
+
+	/* set TX watermark */
+	msm_write(port, 10, UART_TFWR);
+
+	return baud;
+}
+
+static void msm_reset(struct uart_port *port)
+{
+	/* reset everything */
+	msm_write(port, UART_CR_CMD_RESET_RX, UART_CR);
+	msm_write(port, UART_CR_CMD_RESET_TX, UART_CR);
+	msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
+	msm_write(port, UART_CR_CMD_RESET_BREAK_INT, UART_CR);
+	msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
+	msm_write(port, UART_CR_CMD_SET_RFR, UART_CR);
+}
+
+static void msm_init_clock(struct uart_port *port)
+{
+	struct msm_port *msm_port = UART_TO_MSM(port);
+
+	clk_enable(msm_port->clk);
+
+	msm_write(port, 0xC0, UART_MREG);
+	msm_write(port, 0xB2, UART_NREG);
+	msm_write(port, 0x7D, UART_DREG);
+	msm_write(port, 0x1C, UART_MNDREG);
+}
+
+static int msm_startup(struct uart_port *port)
+{
+	struct msm_port *msm_port = UART_TO_MSM(port);
+	unsigned int data, rfr_level;
+	int ret;
+
+	snprintf(msm_port->name, sizeof(msm_port->name),
+		 "msm_serial%d", port->line);
+
+	ret = request_irq(port->irq, msm_irq, IRQF_TRIGGER_HIGH,
+			  msm_port->name, port);
+	if (unlikely(ret))
+		return ret;
+
+	msm_init_clock(port);
+
+	if (likely(port->fifosize > 12))
+		rfr_level = port->fifosize - 12;
+	else
+		rfr_level = port->fifosize;
+
+	/* set automatic RFR level */
+	data = msm_read(port, UART_MR1);
+	data &= ~UART_MR1_AUTO_RFR_LEVEL1;
+	data &= ~UART_MR1_AUTO_RFR_LEVEL0;
+	data |= UART_MR1_AUTO_RFR_LEVEL1 & (rfr_level << 2);
+	data |= UART_MR1_AUTO_RFR_LEVEL0 & rfr_level;
+	msm_write(port, data, UART_MR1);
+
+	/* make sure that RXSTALE count is non-zero */
+	data = msm_read(port, UART_IPR);
+	if (unlikely(!data)) {
+		data |= UART_IPR_RXSTALE_LAST;
+		data |= UART_IPR_STALE_LSB;
+		msm_write(port, data, UART_IPR);
+	}
+
+	msm_reset(port);
+
+	msm_write(port, 0x05, UART_CR);	/* enable TX & RX */
+
+	/* turn on RX and CTS interrupts */
+	msm_port->imr = UART_IMR_RXLEV | UART_IMR_RXSTALE |
+			UART_IMR_CURRENT_CTS;
+	msm_write(port, msm_port->imr, UART_IMR);
+
+	return 0;
+}
+
+static void msm_shutdown(struct uart_port *port)
+{
+	struct msm_port *msm_port = UART_TO_MSM(port);
+
+	msm_port->imr = 0;
+	msm_write(port, 0, UART_IMR); /* disable interrupts */
+
+	clk_disable(msm_port->clk);
+
+	free_irq(port->irq, port);
+}
+
+static void msm_set_termios(struct uart_port *port, struct ktermios *termios,
+			    struct ktermios *old)
+{
+	unsigned long flags;
+	unsigned int baud, mr;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* calculate and set baud rate */
+	baud = uart_get_baud_rate(port, termios, old, 300, 115200);
+	baud = msm_set_baud_rate(port, baud);
+	if (tty_termios_baud_rate(termios))
+		tty_termios_encode_baud_rate(termios, baud, baud);
+	
+	/* calculate parity */
+	mr = msm_read(port, UART_MR2);
+	mr &= ~UART_MR2_PARITY_MODE;
+	if (termios->c_cflag & PARENB) {
+		if (termios->c_cflag & PARODD)
+			mr |= UART_MR2_PARITY_MODE_ODD;
+		else if (termios->c_cflag & CMSPAR)
+			mr |= UART_MR2_PARITY_MODE_SPACE;
+		else
+			mr |= UART_MR2_PARITY_MODE_EVEN;
+	}
+
+	/* calculate bits per char */
+	mr &= ~UART_MR2_BITS_PER_CHAR;
+	switch (termios->c_cflag & CSIZE) {
+	case CS5:
+		mr |= UART_MR2_BITS_PER_CHAR_5;
+		break;
+	case CS6:
+		mr |= UART_MR2_BITS_PER_CHAR_6;
+		break;
+	case CS7:
+		mr |= UART_MR2_BITS_PER_CHAR_7;
+		break;
+	case CS8:
+	default:
+		mr |= UART_MR2_BITS_PER_CHAR_8;
+		break;
+	}
+
+	/* calculate stop bits */
+	mr &= ~(UART_MR2_STOP_BIT_LEN_ONE | UART_MR2_STOP_BIT_LEN_TWO);
+	if (termios->c_cflag & CSTOPB)
+		mr |= UART_MR2_STOP_BIT_LEN_TWO;
+	else
+		mr |= UART_MR2_STOP_BIT_LEN_ONE;
+
+	/* set parity, bits per char, and stop bit */
+	msm_write(port, mr, UART_MR2);
+
+	/* calculate and set hardware flow control */
+	mr = msm_read(port, UART_MR1);
+	mr &= ~(UART_MR1_CTS_CTL | UART_MR1_RX_RDY_CTL);
+	if (termios->c_cflag & CRTSCTS) {
+		mr |= UART_MR1_CTS_CTL;
+		mr |= UART_MR1_RX_RDY_CTL;
+	}
+	msm_write(port, mr, UART_MR1);
+
+	/* Configure status bits to ignore based on termio flags. */
+	port->read_status_mask = 0;
+	if (termios->c_iflag & INPCK)
+		port->read_status_mask |= UART_SR_PAR_FRAME_ERR;
+	if (termios->c_iflag & (BRKINT | PARMRK))
+		port->read_status_mask |= UART_SR_RX_BREAK;
+
+	uart_update_timeout(port, termios->c_cflag, baud);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *msm_type(struct uart_port *port)
+{
+	return "MSM";
+}
+
+static void msm_release_port(struct uart_port *port)
+{
+	struct platform_device *pdev = to_platform_device(port->dev);
+	struct resource *resource;
+	resource_size_t size;
+
+	resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (unlikely(!resource))
+		return;
+	size = resource->end - resource->start + 1;
+
+	release_mem_region(port->mapbase, size);
+	iounmap(port->membase);
+	port->membase = NULL;
+}
+
+static int msm_request_port(struct uart_port *port)
+{
+	struct platform_device *pdev = to_platform_device(port->dev);
+	struct resource *resource;
+	resource_size_t size;
+
+	resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (unlikely(!resource))
+		return -ENXIO;
+	size = resource->end - resource->start + 1;
+
+	if (unlikely(!request_mem_region(port->mapbase, size, "msm_serial")))
+		return -EBUSY;
+
+	port->membase = ioremap(port->mapbase, size);
+	if (!port->membase) {
+		release_mem_region(port->mapbase, size);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static void msm_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE) {
+		port->type = PORT_MSM;
+		msm_request_port(port);
+	}
+}
+
+static int msm_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+	if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_MSM))
+		return -EINVAL;
+	if (unlikely(port->irq != ser->irq))
+		return -EINVAL;
+	return 0;
+}
+
+static void msm_power(struct uart_port *port, unsigned int state,
+		      unsigned int oldstate)
+{
+	struct msm_port *msm_port = UART_TO_MSM(port);
+
+	switch (state) {
+	case 0:
+		clk_enable(msm_port->clk);
+		break;
+	case 3:
+		clk_disable(msm_port->clk);
+		break;
+	default:
+		printk(KERN_ERR "msm_serial: Unknown PM state %d\n", state);
+	}
+}
+
+static struct uart_ops msm_uart_pops = {
+	.tx_empty = msm_tx_empty,
+	.set_mctrl = msm_set_mctrl,
+	.get_mctrl = msm_get_mctrl,
+	.stop_tx = msm_stop_tx,
+	.start_tx = msm_start_tx,
+	.stop_rx = msm_stop_rx,
+	.enable_ms = msm_enable_ms,
+	.break_ctl = msm_break_ctl,
+	.startup = msm_startup,
+	.shutdown = msm_shutdown,
+	.set_termios = msm_set_termios,
+	.type = msm_type,
+	.release_port = msm_release_port,
+	.request_port = msm_request_port,
+	.config_port = msm_config_port,
+	.verify_port = msm_verify_port,
+	.pm = msm_power,
+};
+
+static struct msm_port msm_uart_ports[] = {
+	{
+		.uart = {
+			.iotype = UPIO_MEM,
+			.ops = &msm_uart_pops,
+			.flags = UPF_BOOT_AUTOCONF,
+			.fifosize = 512,
+			.line = 0,
+		},
+	},
+	{
+		.uart = {
+			.iotype = UPIO_MEM,
+			.ops = &msm_uart_pops,
+			.flags = UPF_BOOT_AUTOCONF,
+			.fifosize = 512,
+			.line = 1,
+		},
+	},
+	{
+		.uart = {
+			.iotype = UPIO_MEM,
+			.ops = &msm_uart_pops,
+			.flags = UPF_BOOT_AUTOCONF,
+			.fifosize = 64,
+			.line = 2,
+		},
+	},
+};
+
+#define UART_NR	ARRAY_SIZE(msm_uart_ports)
+
+static inline struct uart_port *get_port_from_line(unsigned int line)
+{
+	return &msm_uart_ports[line].uart;
+}
+
+#ifdef CONFIG_SERIAL_MSM_CONSOLE
+
+static void msm_console_putchar(struct uart_port *port, int c)
+{
+	while (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
+		;
+	msm_write(port, c, UART_TF);
+}
+
+static void msm_console_write(struct console *co, const char *s,
+			      unsigned int count)
+{
+	struct uart_port *port;
+	struct msm_port *msm_port;
+
+	BUG_ON(co->index < 0 || co->index >= UART_NR);
+
+	port = get_port_from_line(co->index);
+	msm_port = UART_TO_MSM(port);
+
+	spin_lock(&port->lock);
+	uart_console_write(port, s, count, msm_console_putchar);
+	spin_unlock(&port->lock);
+}
+
+static int __init msm_console_setup(struct console *co, char *options)
+{
+	struct uart_port *port;
+	int baud, flow, bits, parity;
+
+	if (unlikely(co->index >= UART_NR || co->index < 0))
+		return -ENXIO;
+
+	port = get_port_from_line(co->index);
+
+	if (unlikely(!port->membase))
+		return -ENXIO;
+
+	port->cons = co;
+
+	msm_init_clock(port);
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+	bits = 8;
+	parity = 'n';
+	flow = 'n';
+	msm_write(port, UART_MR2_BITS_PER_CHAR_8 | UART_MR2_STOP_BIT_LEN_ONE,
+		  UART_MR2);	/* 8N1 */
+
+	if (baud < 300 || baud > 115200)
+		baud = 115200;
+	msm_set_baud_rate(port, baud);
+
+	msm_reset(port);
+
+	printk(KERN_INFO "msm_serial: console setup on port #%d\n", port->line);
+
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver msm_uart_driver;
+
+static struct console msm_console = {
+	.name = "ttyMSM",
+	.write = msm_console_write,
+	.device = uart_console_device,
+	.setup = msm_console_setup,
+	.flags = CON_PRINTBUFFER,
+	.index = -1,
+	.data = &msm_uart_driver,
+};
+
+#define MSM_CONSOLE	(&msm_console)
+
+#else
+#define MSM_CONSOLE	NULL
+#endif
+
+static struct uart_driver msm_uart_driver = {
+	.owner = THIS_MODULE,
+	.driver_name = "msm_serial",
+	.dev_name = "ttyMSM",
+	.nr = UART_NR,
+	.cons = MSM_CONSOLE,
+};
+
+static int __init msm_serial_probe(struct platform_device *pdev)
+{
+	struct msm_port *msm_port;
+	struct resource *resource;
+	struct uart_port *port;
+
+	if (unlikely(pdev->id < 0 || pdev->id >= UART_NR))
+		return -ENXIO;
+
+	printk(KERN_INFO "msm_serial: detected port #%d\n", pdev->id);
+
+	port = get_port_from_line(pdev->id);
+	port->dev = &pdev->dev;
+	msm_port = UART_TO_MSM(port);
+
+	msm_port->clk = clk_get(&pdev->dev, "uart_clk");
+	if (unlikely(IS_ERR(msm_port->clk)))
+		return PTR_ERR(msm_port->clk);
+	port->uartclk = clk_get_rate(msm_port->clk);
+
+	resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (unlikely(!resource))
+		return -ENXIO;
+	port->mapbase = resource->start;
+
+	port->irq = platform_get_irq(pdev, 0);
+	if (unlikely(port->irq < 0))
+		return -ENXIO;
+
+	platform_set_drvdata(pdev, port);
+
+	return uart_add_one_port(&msm_uart_driver, port);
+}
+
+static int __devexit msm_serial_remove(struct platform_device *pdev)
+{
+	struct msm_port *msm_port = platform_get_drvdata(pdev);
+
+	clk_put(msm_port->clk);
+
+	return 0;
+}
+
+static struct platform_driver msm_platform_driver = {
+	.probe = msm_serial_probe,
+	.remove = msm_serial_remove,
+	.driver = {
+		.name = "msm_serial",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init msm_serial_init(void)
+{
+	int ret;
+
+	ret = uart_register_driver(&msm_uart_driver);
+	if (unlikely(ret))
+		return ret;
+
+	ret = platform_driver_probe(&msm_platform_driver, msm_serial_probe);
+	if (unlikely(ret))
+		uart_unregister_driver(&msm_uart_driver);
+
+	printk(KERN_INFO "msm_serial: driver initialized\n");
+
+	return ret;
+}
+
+static void __exit msm_serial_exit(void)
+{
+#ifdef CONFIG_SERIAL_MSM_CONSOLE
+	unregister_console(&msm_console);
+#endif
+	platform_driver_unregister(&msm_platform_driver);
+	uart_unregister_driver(&msm_uart_driver);
+}
+
+module_init(msm_serial_init);
+module_exit(msm_serial_exit);
+
+MODULE_AUTHOR("Robert Love <rlove@google.com>");
+MODULE_DESCRIPTION("Driver for msm7x serial device");
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/msm_serial.h b/drivers/serial/msm_serial.h
new file mode 100644
index 00000000000..689f1fa0e84
--- /dev/null
+++ b/drivers/serial/msm_serial.h
@@ -0,0 +1,117 @@
+/*
+ * drivers/serial/msm_serial.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Robert Love <rlove@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DRIVERS_SERIAL_MSM_SERIAL_H
+#define __DRIVERS_SERIAL_MSM_SERIAL_H
+
+#define UART_MR1			0x0000
+
+#define UART_MR1_AUTO_RFR_LEVEL0	0x3F
+#define UART_MR1_AUTO_RFR_LEVEL1	0x3FF00
+#define UART_MR1_RX_RDY_CTL    		(1 << 7)
+#define UART_MR1_CTS_CTL       		(1 << 6)
+
+#define UART_MR2			0x0004
+#define UART_MR2_ERROR_MODE		(1 << 6)
+#define UART_MR2_BITS_PER_CHAR		0x30
+#define UART_MR2_BITS_PER_CHAR_5	(0x0 << 4)
+#define UART_MR2_BITS_PER_CHAR_6	(0x1 << 4)
+#define UART_MR2_BITS_PER_CHAR_7	(0x2 << 4)
+#define UART_MR2_BITS_PER_CHAR_8	(0x3 << 4)
+#define UART_MR2_STOP_BIT_LEN_ONE	(0x1 << 2)
+#define UART_MR2_STOP_BIT_LEN_TWO	(0x3 << 2)
+#define UART_MR2_PARITY_MODE_NONE	0x0
+#define UART_MR2_PARITY_MODE_ODD	0x1
+#define UART_MR2_PARITY_MODE_EVEN	0x2
+#define UART_MR2_PARITY_MODE_SPACE	0x3
+#define UART_MR2_PARITY_MODE		0x3
+
+#define UART_CSR	0x0008
+#define UART_CSR_115200	0xFF
+#define UART_CSR_57600	0xEE
+#define UART_CSR_38400	0xDD
+#define UART_CSR_28800	0xCC
+#define UART_CSR_19200	0xBB
+#define UART_CSR_14400	0xAA
+#define UART_CSR_9600	0x99
+#define UART_CSR_4800	0x77
+#define UART_CSR_2400	0x55
+#define UART_CSR_1200	0x44
+#define UART_CSR_600	0x33
+#define UART_CSR_300	0x22
+
+#define UART_TF		0x000C
+
+#define UART_CR				0x0010
+#define UART_CR_CMD_NULL		(0 << 4)
+#define UART_CR_CMD_RESET_RX		(1 << 4)
+#define UART_CR_CMD_RESET_TX		(2 << 4)
+#define UART_CR_CMD_RESET_ERR		(3 << 4)
+#define UART_CR_CMD_RESET_BREAK_INT	(4 << 4)
+#define UART_CR_CMD_START_BREAK		(5 << 4)
+#define UART_CR_CMD_STOP_BREAK		(6 << 4)
+#define UART_CR_CMD_RESET_CTS		(7 << 4)
+#define UART_CR_CMD_PACKET_MODE		(9 << 4)
+#define UART_CR_CMD_MODE_RESET		(12 << 4)
+#define UART_CR_CMD_SET_RFR		(13 << 4)
+#define UART_CR_CMD_RESET_RFR		(14 << 4)
+#define UART_CR_TX_DISABLE		(1 << 3)
+#define UART_CR_TX_ENABLE		(1 << 3)
+#define UART_CR_RX_DISABLE		(1 << 3)
+#define UART_CR_RX_ENABLE		(1 << 3)
+
+#define UART_IMR		0x0014
+#define UART_IMR_TXLEV		(1 << 0)
+#define UART_IMR_RXSTALE	(1 << 3)
+#define UART_IMR_RXLEV		(1 << 4)
+#define UART_IMR_DELTA_CTS	(1 << 5)
+#define UART_IMR_CURRENT_CTS	(1 << 6)
+
+#define UART_IPR_RXSTALE_LAST		0x20
+#define UART_IPR_STALE_LSB		0x1F
+#define UART_IPR_STALE_TIMEOUT_MSB	0x3FF80
+
+#define UART_IPR	0x0018
+#define UART_TFWR	0x001C
+#define UART_RFWR	0x0020
+#define UART_HCR	0x0024
+
+#define UART_MREG		0x0028
+#define UART_NREG		0x002C
+#define UART_DREG		0x0030
+#define UART_MNDREG		0x0034
+#define UART_IRDA		0x0038
+#define UART_MISR_MODE		0x0040
+#define UART_MISR_RESET		0x0044
+#define UART_MISR_EXPORT	0x0048
+#define UART_MISR_VAL		0x004C
+#define UART_TEST_CTRL		0x0050
+
+#define UART_SR			0x0008
+#define UART_SR_HUNT_CHAR	(1 << 7)
+#define UART_SR_RX_BREAK	(1 << 6)
+#define UART_SR_PAR_FRAME_ERR	(1 << 5)
+#define UART_SR_OVERRUN		(1 << 4)
+#define UART_SR_TX_EMPTY	(1 << 3)
+#define UART_SR_TX_READY	(1 << 2)
+#define UART_SR_RX_FULL		(1 << 1)
+#define UART_SR_RX_READY	(1 << 0)
+
+#define UART_RF		0x000C
+#define UART_MISR	0x0010
+#define UART_ISR	0x0014
+
+#endif	/* __DRIVERS_SERIAL_MSM_SERIAL_H */
diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c
index 54483cd3529..02406ba6da1 100644
--- a/drivers/serial/of_serial.c
+++ b/drivers/serial/of_serial.c
@@ -67,7 +67,7 @@ static int __devinit of_platform_serial_setup(struct of_device *ofdev,
 	port->type = type;
 	port->uartclk = *clk;
 	port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
-		| UPF_FIXED_PORT;
+		| UPF_FIXED_PORT | UPF_FIXED_TYPE;
 	port->dev = &ofdev->dev;
 	/* If current-speed was set, then try not to change it. */
 	if (spd)
diff --git a/drivers/serial/s3c2400.c b/drivers/serial/s3c2400.c
index 4873f2978bd..fb00ed5296e 100644
--- a/drivers/serial/s3c2400.c
+++ b/drivers/serial/s3c2400.c
@@ -78,7 +78,7 @@ static int s3c2400_serial_probe(struct platform_device *dev)
 
 static struct platform_driver s3c2400_serial_drv = {
 	.probe		= s3c2400_serial_probe,
-	.remove		= s3c24xx_serial_remove,
+	.remove		= __devexit_p(s3c24xx_serial_remove),
 	.driver		= {
 		.name	= "s3c2400-uart",
 		.owner	= THIS_MODULE,
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index 87c182ef71b..b5d7cbcba2a 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -90,7 +90,7 @@ static int s3c2410_serial_probe(struct platform_device *dev)
 
 static struct platform_driver s3c2410_serial_drv = {
 	.probe		= s3c2410_serial_probe,
-	.remove		= s3c24xx_serial_remove,
+	.remove		= __devexit_p(s3c24xx_serial_remove),
 	.driver		= {
 		.name	= "s3c2410-uart",
 		.owner	= THIS_MODULE,
diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c
index fd017b37556..11dcb90bdfe 100644
--- a/drivers/serial/s3c2412.c
+++ b/drivers/serial/s3c2412.c
@@ -123,7 +123,7 @@ static int s3c2412_serial_probe(struct platform_device *dev)
 
 static struct platform_driver s3c2412_serial_drv = {
 	.probe		= s3c2412_serial_probe,
-	.remove		= s3c24xx_serial_remove,
+	.remove		= __devexit_p(s3c24xx_serial_remove),
 	.driver		= {
 		.name	= "s3c2412-uart",
 		.owner	= THIS_MODULE,
diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c
index 29cbb0afef8..06c5b0cc47a 100644
--- a/drivers/serial/s3c2440.c
+++ b/drivers/serial/s3c2440.c
@@ -153,7 +153,7 @@ static int s3c2440_serial_probe(struct platform_device *dev)
 
 static struct platform_driver s3c2440_serial_drv = {
 	.probe		= s3c2440_serial_probe,
-	.remove		= s3c24xx_serial_remove,
+	.remove		= __devexit_p(s3c24xx_serial_remove),
 	.driver		= {
 		.name	= "s3c2440-uart",
 		.owner	= THIS_MODULE,
diff --git a/drivers/serial/s3c24a0.c b/drivers/serial/s3c24a0.c
index ebf2fd3c8f7..786a067d62a 100644
--- a/drivers/serial/s3c24a0.c
+++ b/drivers/serial/s3c24a0.c
@@ -94,7 +94,7 @@ static int s3c24a0_serial_probe(struct platform_device *dev)
 
 static struct platform_driver s3c24a0_serial_drv = {
 	.probe		= s3c24a0_serial_probe,
-	.remove		= s3c24xx_serial_remove,
+	.remove		= __devexit_p(s3c24xx_serial_remove),
 	.driver		= {
 		.name	= "s3c24a0-uart",
 		.owner	= THIS_MODULE,
diff --git a/drivers/serial/s3c6400.c b/drivers/serial/s3c6400.c
index 3e378523368..48f1a3781f0 100644
--- a/drivers/serial/s3c6400.c
+++ b/drivers/serial/s3c6400.c
@@ -124,7 +124,7 @@ static int s3c6400_serial_probe(struct platform_device *dev)
 
 static struct platform_driver s3c6400_serial_drv = {
 	.probe		= s3c6400_serial_probe,
-	.remove		= s3c24xx_serial_remove,
+	.remove		= __devexit_p(s3c24xx_serial_remove),
 	.driver		= {
 		.name	= "s3c6400-uart",
 		.owner	= THIS_MODULE,
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 93b5d75db12..c8851a0db63 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -1174,7 +1174,7 @@ int s3c24xx_serial_probe(struct platform_device *dev,
 
 EXPORT_SYMBOL_GPL(s3c24xx_serial_probe);
 
-int s3c24xx_serial_remove(struct platform_device *dev)
+int __devexit s3c24xx_serial_remove(struct platform_device *dev)
 {
 	struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
 
diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h
index 7afb94843a0..d3fe315969f 100644
--- a/drivers/serial/samsung.h
+++ b/drivers/serial/samsung.h
@@ -72,7 +72,7 @@ struct s3c24xx_uart_port {
 extern int s3c24xx_serial_probe(struct platform_device *dev,
 				struct s3c24xx_uart_info *uart);
 
-extern int s3c24xx_serial_remove(struct platform_device *dev);
+extern int __devexit s3c24xx_serial_remove(struct platform_device *dev);
 
 extern int s3c24xx_serial_initconsole(struct platform_driver *drv,
 				      struct s3c24xx_uart_info *uart);
diff --git a/drivers/serial/sb1250-duart.c b/drivers/serial/sb1250-duart.c
index a4fb343a08d..319e8b83f6b 100644
--- a/drivers/serial/sb1250-duart.c
+++ b/drivers/serial/sb1250-duart.c
@@ -204,7 +204,7 @@ static int sbd_receive_drain(struct sbd_port *sport)
 {
 	int loops = 10000;
 
-	while (sbd_receive_ready(sport) && loops--)
+	while (sbd_receive_ready(sport) && --loops)
 		read_sbdchn(sport, R_DUART_RX_HOLD);
 	return loops;
 }
@@ -218,7 +218,7 @@ static int __maybe_unused sbd_transmit_drain(struct sbd_port *sport)
 {
 	int loops = 10000;
 
-	while (!sbd_transmit_ready(sport) && loops--)
+	while (!sbd_transmit_ready(sport) && --loops)
 		udelay(2);
 	return loops;
 }
@@ -232,7 +232,7 @@ static int sbd_line_drain(struct sbd_port *sport)
 {
 	int loops = 10000;
 
-	while (!sbd_transmit_empty(sport) && loops--)
+	while (!sbd_transmit_empty(sport) && --loops)
 		udelay(2);
 	return loops;
 }
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index a4cf1079b31..66f52674ca0 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -1332,44 +1332,46 @@ err_unreg:
 	return ret;
 }
 
-static int sci_suspend(struct platform_device *dev, pm_message_t state)
+static int sci_suspend(struct device *dev)
 {
-	struct sh_sci_priv *priv = platform_get_drvdata(dev);
+	struct sh_sci_priv *priv = dev_get_drvdata(dev);
 	struct sci_port *p;
 	unsigned long flags;
 
 	spin_lock_irqsave(&priv->lock, flags);
 	list_for_each_entry(p, &priv->ports, node)
 		uart_suspend_port(&sci_uart_driver, &p->port);
-
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	return 0;
 }
 
-static int sci_resume(struct platform_device *dev)
+static int sci_resume(struct device *dev)
 {
-	struct sh_sci_priv *priv = platform_get_drvdata(dev);
+	struct sh_sci_priv *priv = dev_get_drvdata(dev);
 	struct sci_port *p;
 	unsigned long flags;
 
 	spin_lock_irqsave(&priv->lock, flags);
 	list_for_each_entry(p, &priv->ports, node)
 		uart_resume_port(&sci_uart_driver, &p->port);
-
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	return 0;
 }
 
+static struct dev_pm_ops sci_dev_pm_ops = {
+	.suspend	= sci_suspend,
+	.resume		= sci_resume,
+};
+
 static struct platform_driver sci_driver = {
 	.probe		= sci_probe,
 	.remove		= __devexit_p(sci_remove),
-	.suspend	= sci_suspend,
-	.resume		= sci_resume,
 	.driver		= {
 		.name	= "sh-sci",
 		.owner	= THIS_MODULE,
+		.pm	= &sci_dev_pm_ops,
 	},
 };
 
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index a94a2ab4b57..1df5325faab 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -461,7 +461,7 @@ static void sunhv_console_write_paged(struct console *con, const char *s, unsign
 					break;
 				udelay(1);
 			}
-			if (limit <= 0)
+			if (limit < 0)
 				break;
 			page_bytes -= written;
 			ra += written;
diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c
index ac9e5d5f742..063a313b755 100644
--- a/drivers/serial/timbuart.c
+++ b/drivers/serial/timbuart.c
@@ -33,29 +33,29 @@ struct timbuart_port {
 	struct uart_port	port;
 	struct tasklet_struct	tasklet;
 	int			usedma;
-	u8			last_ier;
+	u32			last_ier;
 	struct platform_device  *dev;
 };
 
 static int baudrates[] = {9600, 19200, 38400, 57600, 115200, 230400, 460800,
 	921600, 1843200, 3250000};
 
-static void timbuart_mctrl_check(struct uart_port *port, u8 isr, u8 *ier);
+static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier);
 
 static irqreturn_t timbuart_handleinterrupt(int irq, void *devid);
 
 static void timbuart_stop_rx(struct uart_port *port)
 {
 	/* spin lock held by upper layer, disable all RX interrupts */
-	u8 ier = ioread8(port->membase + TIMBUART_IER) & ~RXFLAGS;
-	iowrite8(ier, port->membase + TIMBUART_IER);
+	u32 ier = ioread32(port->membase + TIMBUART_IER) & ~RXFLAGS;
+	iowrite32(ier, port->membase + TIMBUART_IER);
 }
 
 static void timbuart_stop_tx(struct uart_port *port)
 {
 	/* spinlock held by upper layer, disable TX interrupt */
-	u8 ier = ioread8(port->membase + TIMBUART_IER) & ~TXBAE;
-	iowrite8(ier, port->membase + TIMBUART_IER);
+	u32 ier = ioread32(port->membase + TIMBUART_IER) & ~TXBAE;
+	iowrite32(ier, port->membase + TIMBUART_IER);
 }
 
 static void timbuart_start_tx(struct uart_port *port)
@@ -72,14 +72,14 @@ static void timbuart_flush_buffer(struct uart_port *port)
 	u8 ctl = ioread8(port->membase + TIMBUART_CTRL) | TIMBUART_CTRL_FLSHTX;
 
 	iowrite8(ctl, port->membase + TIMBUART_CTRL);
-	iowrite8(TXBF, port->membase + TIMBUART_ISR);
+	iowrite32(TXBF, port->membase + TIMBUART_ISR);
 }
 
 static void timbuart_rx_chars(struct uart_port *port)
 {
 	struct tty_struct *tty = port->info->port.tty;
 
-	while (ioread8(port->membase + TIMBUART_ISR) & RXDP) {
+	while (ioread32(port->membase + TIMBUART_ISR) & RXDP) {
 		u8 ch = ioread8(port->membase + TIMBUART_RXFIFO);
 		port->icount.rx++;
 		tty_insert_flip_char(tty, ch, TTY_NORMAL);
@@ -97,7 +97,7 @@ static void timbuart_tx_chars(struct uart_port *port)
 {
 	struct circ_buf *xmit = &port->info->xmit;
 
-	while (!(ioread8(port->membase + TIMBUART_ISR) & TXBF) &&
+	while (!(ioread32(port->membase + TIMBUART_ISR) & TXBF) &&
 		!uart_circ_empty(xmit)) {
 		iowrite8(xmit->buf[xmit->tail],
 			port->membase + TIMBUART_TXFIFO);
@@ -114,7 +114,7 @@ static void timbuart_tx_chars(struct uart_port *port)
 		ioread8(port->membase + TIMBUART_BAUDRATE));
 }
 
-static void timbuart_handle_tx_port(struct uart_port *port, u8 isr, u8 *ier)
+static void timbuart_handle_tx_port(struct uart_port *port, u32 isr, u32 *ier)
 {
 	struct timbuart_port *uart =
 		container_of(port, struct timbuart_port, port);
@@ -129,7 +129,7 @@ static void timbuart_handle_tx_port(struct uart_port *port, u8 isr, u8 *ier)
 	if (isr & TXFLAGS) {
 		timbuart_tx_chars(port);
 		/* clear all TX interrupts */
-		iowrite8(TXFLAGS, port->membase + TIMBUART_ISR);
+		iowrite32(TXFLAGS, port->membase + TIMBUART_ISR);
 
 		if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 			uart_write_wakeup(port);
@@ -148,7 +148,7 @@ static void timbuart_handle_tx_port(struct uart_port *port, u8 isr, u8 *ier)
 	dev_dbg(port->dev, "%s - leaving\n", __func__);
 }
 
-void timbuart_handle_rx_port(struct uart_port *port, u8 isr, u8 *ier)
+void timbuart_handle_rx_port(struct uart_port *port, u32 isr, u32 *ier)
 {
 	if (isr & RXFLAGS) {
 		/* Some RX status is set */
@@ -161,7 +161,7 @@ void timbuart_handle_rx_port(struct uart_port *port, u8 isr, u8 *ier)
 			timbuart_rx_chars(port);
 
 		/* ack all RX interrupts */
-		iowrite8(RXFLAGS, port->membase + TIMBUART_ISR);
+		iowrite32(RXFLAGS, port->membase + TIMBUART_ISR);
 	}
 
 	/* always have the RX interrupts enabled */
@@ -173,11 +173,11 @@ void timbuart_handle_rx_port(struct uart_port *port, u8 isr, u8 *ier)
 void timbuart_tasklet(unsigned long arg)
 {
 	struct timbuart_port *uart = (struct timbuart_port *)arg;
-	u8 isr, ier = 0;
+	u32 isr, ier = 0;
 
 	spin_lock(&uart->port.lock);
 
-	isr = ioread8(uart->port.membase + TIMBUART_ISR);
+	isr = ioread32(uart->port.membase + TIMBUART_ISR);
 	dev_dbg(uart->port.dev, "%s ISR: %x\n", __func__, isr);
 
 	if (!uart->usedma)
@@ -188,7 +188,7 @@ void timbuart_tasklet(unsigned long arg)
 	if (!uart->usedma)
 		timbuart_handle_rx_port(&uart->port, isr, &ier);
 
-	iowrite8(ier, uart->port.membase + TIMBUART_IER);
+	iowrite32(ier, uart->port.membase + TIMBUART_IER);
 
 	spin_unlock(&uart->port.lock);
 	dev_dbg(uart->port.dev, "%s leaving\n", __func__);
@@ -196,9 +196,9 @@ void timbuart_tasklet(unsigned long arg)
 
 static unsigned int timbuart_tx_empty(struct uart_port *port)
 {
-	u8 isr = ioread8(port->membase + TIMBUART_ISR);
+	u32 isr = ioread32(port->membase + TIMBUART_ISR);
 
-	return (isr & TXBAE) ? TIOCSER_TEMT : 0;
+	return (isr & TXBE) ? TIOCSER_TEMT : 0;
 }
 
 static unsigned int timbuart_get_mctrl(struct uart_port *port)
@@ -222,13 +222,13 @@ static void timbuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
 		iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL);
 }
 
-static void timbuart_mctrl_check(struct uart_port *port, u8 isr, u8 *ier)
+static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier)
 {
 	unsigned int cts;
 
 	if (isr & CTS_DELTA) {
 		/* ack */
-		iowrite8(CTS_DELTA, port->membase + TIMBUART_ISR);
+		iowrite32(CTS_DELTA, port->membase + TIMBUART_ISR);
 		cts = timbuart_get_mctrl(port);
 		uart_handle_cts_change(port, cts & TIOCM_CTS);
 		wake_up_interruptible(&port->info->delta_msr_wait);
@@ -255,9 +255,9 @@ static int timbuart_startup(struct uart_port *port)
 	dev_dbg(port->dev, "%s\n", __func__);
 
 	iowrite8(TIMBUART_CTRL_FLSHRX, port->membase + TIMBUART_CTRL);
-	iowrite8(0xff, port->membase + TIMBUART_ISR);
+	iowrite32(0x1ff, port->membase + TIMBUART_ISR);
 	/* Enable all but TX interrupts */
-	iowrite8(RXBAF | RXBF | RXTT | CTS_DELTA,
+	iowrite32(RXBAF | RXBF | RXTT | CTS_DELTA,
 		port->membase + TIMBUART_IER);
 
 	return request_irq(port->irq, timbuart_handleinterrupt, IRQF_SHARED,
@@ -270,7 +270,7 @@ static void timbuart_shutdown(struct uart_port *port)
 		container_of(port, struct timbuart_port, port);
 	dev_dbg(port->dev, "%s\n", __func__);
 	free_irq(port->irq, uart);
-	iowrite8(0, port->membase + TIMBUART_IER);
+	iowrite32(0, port->membase + TIMBUART_IER);
 }
 
 static int get_bindex(int baud)
@@ -359,10 +359,10 @@ static irqreturn_t timbuart_handleinterrupt(int irq, void *devid)
 	struct timbuart_port *uart = (struct timbuart_port *)devid;
 
 	if (ioread8(uart->port.membase + TIMBUART_IPR)) {
-		uart->last_ier = ioread8(uart->port.membase + TIMBUART_IER);
+		uart->last_ier = ioread32(uart->port.membase + TIMBUART_IER);
 
 		/* disable interrupts, the tasklet enables them again */
-		iowrite8(0, uart->port.membase + TIMBUART_IER);
+		iowrite32(0, uart->port.membase + TIMBUART_IER);
 
 		/* fire off bottom half */
 		tasklet_schedule(&uart->tasklet);
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
index 7de66c06b05..e945e780b5c 100644
--- a/drivers/serial/ucc_uart.c
+++ b/drivers/serial/ucc_uart.c
@@ -681,22 +681,27 @@ static void qe_uart_init_ucc(struct uart_qe_port *qe_port)
 	out_be16(&uccup->rccm, 0xc0ff);
 
 	/* Configure the GUMR registers for UART */
-	if (soft_uart)
+	if (soft_uart) {
 		/* Soft-UART requires a 1X multiplier for TX */
 		clrsetbits_be32(&uccp->gumr_l,
 			UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK |
 			UCC_SLOW_GUMR_L_RDCR_MASK,
 			UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_1 |
 			UCC_SLOW_GUMR_L_RDCR_16);
-	else
+
+		clrsetbits_be32(&uccp->gumr_h, UCC_SLOW_GUMR_H_RFW,
+			UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX);
+	} else {
 		clrsetbits_be32(&uccp->gumr_l,
 			UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK |
 			UCC_SLOW_GUMR_L_RDCR_MASK,
 			UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_16 |
 			UCC_SLOW_GUMR_L_RDCR_16);
 
-	clrsetbits_be32(&uccp->gumr_h, UCC_SLOW_GUMR_H_RFW,
-		UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX);
+		clrsetbits_be32(&uccp->gumr_h,
+			UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX,
+			UCC_SLOW_GUMR_H_RFW);
+	}
 
 #ifdef LOOPBACK
 	clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK,
@@ -706,7 +711,7 @@ static void qe_uart_init_ucc(struct uart_qe_port *qe_port)
 		UCC_SLOW_GUMR_H_CDS);
 #endif
 
-	/* Enable rx interrupts  and clear all pending events.  */
+	/* Disable rx interrupts  and clear all pending events.  */
 	out_be16(&uccp->uccm, 0);
 	out_be16(&uccp->ucce, 0xffff);
 	out_be16(&uccp->udsr, 0x7e7e);
@@ -765,6 +770,10 @@ static void qe_uart_init_ucc(struct uart_qe_port *qe_port)
 		cecr_subblock = ucc_slow_get_qe_cr_subblock(qe_port->ucc_num);
 		qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock,
 			QE_CR_PROTOCOL_UNSPECIFIED, 0);
+	} else {
+		cecr_subblock = ucc_slow_get_qe_cr_subblock(qe_port->ucc_num);
+		qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock,
+			QE_CR_PROTOCOL_UART, 0);
 	}
 }
 
diff --git a/drivers/serial/zs.c b/drivers/serial/zs.c
index 9e6a873f820..d8c2809b1ab 100644
--- a/drivers/serial/zs.c
+++ b/drivers/serial/zs.c
@@ -231,7 +231,7 @@ static int zs_receive_drain(struct zs_port *zport)
 {
 	int loops = 10000;
 
-	while ((read_zsreg(zport, R0) & Rx_CH_AV) && loops--)
+	while ((read_zsreg(zport, R0) & Rx_CH_AV) && --loops)
 		read_zsdata(zport);
 	return loops;
 }
@@ -241,7 +241,7 @@ static int zs_transmit_drain(struct zs_port *zport, int irq)
 	struct zs_scc *scc = zport->scc;
 	int loops = 10000;
 
-	while (!(read_zsreg(zport, R0) & Tx_BUF_EMP) && loops--) {
+	while (!(read_zsreg(zport, R0) & Tx_BUF_EMP) && --loops) {
 		zs_spin_unlock_cond_irq(&scc->zlock, irq);
 		udelay(2);
 		zs_spin_lock_cond_irq(&scc->zlock, irq);
@@ -254,7 +254,7 @@ static int zs_line_drain(struct zs_port *zport, int irq)
 	struct zs_scc *scc = zport->scc;
 	int loops = 10000;
 
-	while (!(read_zsreg(zport, R1) & ALL_SNT) && loops--) {
+	while (!(read_zsreg(zport, R1) & ALL_SNT) && --loops) {
 		zs_spin_unlock_cond_irq(&scc->zlock, irq);
 		udelay(2);
 		zs_spin_lock_cond_irq(&scc->zlock, irq);
diff --git a/drivers/sh/intc.c b/drivers/sh/intc.c
index d687a9b93d0..3dd231a643b 100644
--- a/drivers/sh/intc.c
+++ b/drivers/sh/intc.c
@@ -20,7 +20,6 @@
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/interrupt.h>
-#include <linux/bootmem.h>
 #include <linux/sh_intc.h>
 #include <linux/sysdev.h>
 #include <linux/list.h>
@@ -675,7 +674,7 @@ void __init register_intc_controller(struct intc_desc *desc)
 	unsigned int i, k, smp;
 	struct intc_desc_int *d;
 
-	d = alloc_bootmem(sizeof(*d));
+	d = kzalloc(sizeof(*d), GFP_NOWAIT);
 
 	INIT_LIST_HEAD(&d->list);
 	list_add(&d->list, &intc_list);
@@ -687,9 +686,9 @@ void __init register_intc_controller(struct intc_desc *desc)
 #if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 	d->nr_reg += desc->ack_regs ? desc->nr_ack_regs : 0;
 #endif
-	d->reg = alloc_bootmem(d->nr_reg * sizeof(*d->reg));
+	d->reg = kzalloc(d->nr_reg * sizeof(*d->reg), GFP_NOWAIT);
 #ifdef CONFIG_SMP
-	d->smp = alloc_bootmem(d->nr_reg * sizeof(*d->smp));
+	d->smp = kzalloc(d->nr_reg * sizeof(*d->smp), GFP_NOWAIT);
 #endif
 	k = 0;
 
@@ -702,7 +701,7 @@ void __init register_intc_controller(struct intc_desc *desc)
 	}
 
 	if (desc->prio_regs) {
-		d->prio = alloc_bootmem(desc->nr_vectors * sizeof(*d->prio));
+		d->prio = kzalloc(desc->nr_vectors * sizeof(*d->prio), GFP_NOWAIT);
 
 		for (i = 0; i < desc->nr_prio_regs; i++) {
 			smp = IS_SMP(desc->prio_regs[i]);
@@ -712,7 +711,7 @@ void __init register_intc_controller(struct intc_desc *desc)
 	}
 
 	if (desc->sense_regs) {
-		d->sense = alloc_bootmem(desc->nr_vectors * sizeof(*d->sense));
+		d->sense = kzalloc(desc->nr_vectors * sizeof(*d->sense), GFP_NOWAIT);
 
 		for (i = 0; i < desc->nr_sense_regs; i++) {
 			k += save_reg(d, k, desc->sense_regs[i].reg, 0);
@@ -757,7 +756,7 @@ void __init register_intc_controller(struct intc_desc *desc)
 			vect2->enum_id = 0;
 
 			if (!intc_evt2irq_table)
-				intc_evt2irq_table = alloc_bootmem(NR_IRQS);
+				intc_evt2irq_table = kzalloc(NR_IRQS, GFP_NOWAIT);
 
 			if (!intc_evt2irq_table) {
 				pr_warning("intc: cannot allocate evt2irq!\n");
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index e8aae227b5e..2c733c27db2 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -139,17 +139,15 @@ config SPI_MPC52xx_PSC
 	  This enables using the Freescale MPC52xx Programmable Serial
 	  Controller in master SPI mode.
 
-config SPI_MPC83xx
-	tristate "Freescale MPC83xx/QUICC Engine SPI controller"
-	depends on (PPC_83xx || QUICC_ENGINE) && EXPERIMENTAL
+config SPI_MPC8xxx
+	tristate "Freescale MPC8xxx SPI controller"
+	depends on FSL_SOC
 	help
-	  This enables using the Freescale MPC83xx and QUICC Engine SPI
-	  controllers in master mode.
+	  This enables using the Freescale MPC8xxx SPI controllers in master
+	  mode.
 
-	  Note, this driver uniquely supports the SPI controller on the MPC83xx
-	  family of PowerPC processors, plus processors with QUICC Engine
-	  technology. This driver uses a simple set of shift registers for data
-	  (opposed to the CPM based descriptor model).
+	  This driver uses a simple set of shift registers for data (opposed
+	  to the CPM based descriptor model).
 
 config SPI_OMAP_UWIRE
 	tristate "OMAP1 MicroWire"
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index ecfadb18048..3de408d294b 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -25,7 +25,7 @@ obj-$(CONFIG_SPI_OMAP24XX)		+= omap2_mcspi.o
 obj-$(CONFIG_SPI_ORION)			+= orion_spi.o
 obj-$(CONFIG_SPI_PL022)			+= amba-pl022.o
 obj-$(CONFIG_SPI_MPC52xx_PSC)		+= mpc52xx_psc_spi.o
-obj-$(CONFIG_SPI_MPC83xx)		+= spi_mpc83xx.o
+obj-$(CONFIG_SPI_MPC8xxx)		+= spi_mpc8xxx.o
 obj-$(CONFIG_SPI_S3C24XX_GPIO)		+= spi_s3c24xx_gpio.o
 obj-$(CONFIG_SPI_S3C24XX)		+= spi_s3c24xx.o
 obj-$(CONFIG_SPI_TXX9)			+= spi_txx9.o
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index 12e443cc4ac..f5b3fdbb1e2 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -530,9 +530,6 @@ atmel_spi_interrupt(int irq, void *dev_id)
 	return ret;
 }
 
-/* the spi->mode bits understood by this driver: */
-#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH)
-
 static int atmel_spi_setup(struct spi_device *spi)
 {
 	struct atmel_spi	*as;
@@ -555,8 +552,6 @@ static int atmel_spi_setup(struct spi_device *spi)
 		return -EINVAL;
 	}
 
-	if (bits == 0)
-		bits = 8;
 	if (bits < 8 || bits > 16) {
 		dev_dbg(&spi->dev,
 				"setup: invalid bits_per_word %u (8 to 16)\n",
@@ -564,12 +559,6 @@ static int atmel_spi_setup(struct spi_device *spi)
 		return -EINVAL;
 	}
 
-	if (spi->mode & ~MODEBITS) {
-		dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n",
-			spi->mode & ~MODEBITS);
-		return -EINVAL;
-	}
-
 	/* see notes above re chipselect */
 	if (!atmel_spi_is_v2()
 			&& spi->chip_select == 0
@@ -775,6 +764,9 @@ static int __init atmel_spi_probe(struct platform_device *pdev)
 	if (!master)
 		goto out_free;
 
+	/* the spi->mode bits understood by this driver: */
+	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+
 	master->bus_num = pdev->id;
 	master->num_chipselect = 4;
 	master->setup = atmel_spi_setup;
diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c
index b02f25c702f..76cbc1a6659 100644
--- a/drivers/spi/au1550_spi.c
+++ b/drivers/spi/au1550_spi.c
@@ -284,27 +284,16 @@ static int au1550_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t)
 	return 0;
 }
 
-/* the spi->mode bits understood by this driver: */
-#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST)
-
 static int au1550_spi_setup(struct spi_device *spi)
 {
 	struct au1550_spi *hw = spi_master_get_devdata(spi->master);
 
-	if (spi->bits_per_word == 0)
-		spi->bits_per_word = 8;
 	if (spi->bits_per_word < 4 || spi->bits_per_word > 24) {
 		dev_err(&spi->dev, "setup: invalid bits_per_word=%d\n",
 			spi->bits_per_word);
 		return -EINVAL;
 	}
 
-	if (spi->mode & ~MODEBITS) {
-		dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n",
-			spi->mode & ~MODEBITS);
-		return -EINVAL;
-	}
-
 	if (spi->max_speed_hz == 0)
 		spi->max_speed_hz = hw->freq_max;
 	if (spi->max_speed_hz > hw->freq_max
@@ -781,6 +770,9 @@ static int __init au1550_spi_probe(struct platform_device *pdev)
 		goto err_nomem;
 	}
 
+	/* the spi->mode bits understood by this driver: */
+	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
+
 	hw = spi_master_get_devdata(master);
 
 	hw->master = spi_master_get(master);
diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c
index 68c77a91159..1b74d5ca03f 100644
--- a/drivers/spi/mpc52xx_psc_spi.c
+++ b/drivers/spi/mpc52xx_psc_spi.c
@@ -13,6 +13,7 @@
 
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/interrupt.h>
 #include <linux/of_platform.h>
@@ -30,8 +31,7 @@
 
 struct mpc52xx_psc_spi {
 	/* fsl_spi_platform data */
-	void (*activate_cs)(u8, u8);
-	void (*deactivate_cs)(u8, u8);
+	void (*cs_control)(struct spi_device *spi, bool on);
 	u32 sysclk;
 
 	/* driver internal data */
@@ -111,18 +111,16 @@ static void mpc52xx_psc_spi_activate_cs(struct spi_device *spi)
 	out_be16((u16 __iomem *)&psc->ccr, ccr);
 	mps->bits_per_word = cs->bits_per_word;
 
-	if (mps->activate_cs)
-		mps->activate_cs(spi->chip_select,
-				(spi->mode & SPI_CS_HIGH) ? 1 : 0);
+	if (mps->cs_control)
+		mps->cs_control(spi, (spi->mode & SPI_CS_HIGH) ? 1 : 0);
 }
 
 static void mpc52xx_psc_spi_deactivate_cs(struct spi_device *spi)
 {
 	struct mpc52xx_psc_spi *mps = spi_master_get_devdata(spi->master);
 
-	if (mps->deactivate_cs)
-		mps->deactivate_cs(spi->chip_select,
-				(spi->mode & SPI_CS_HIGH) ? 1 : 0);
+	if (mps->cs_control)
+		mps->cs_control(spi, (spi->mode & SPI_CS_HIGH) ? 0 : 1);
 }
 
 #define MPC52xx_PSC_BUFSIZE (MPC52xx_PSC_RFNUM_MASK + 1)
@@ -261,9 +259,6 @@ static void mpc52xx_psc_spi_work(struct work_struct *work)
 	spin_unlock_irq(&mps->lock);
 }
 
-/* the spi->mode bits understood by this driver: */
-#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST)
-
 static int mpc52xx_psc_spi_setup(struct spi_device *spi)
 {
 	struct mpc52xx_psc_spi *mps = spi_master_get_devdata(spi->master);
@@ -273,12 +268,6 @@ static int mpc52xx_psc_spi_setup(struct spi_device *spi)
 	if (spi->bits_per_word%8)
 		return -EINVAL;
 
-	if (spi->mode & ~MODEBITS) {
-		dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n",
-			spi->mode & ~MODEBITS);
-		return -EINVAL;
-	}
-
 	if (!cs) {
 		cs = kzalloc(sizeof *cs, GFP_KERNEL);
 		if (!cs)
@@ -385,18 +374,19 @@ static int __init mpc52xx_psc_spi_do_probe(struct device *dev, u32 regaddr,
 	dev_set_drvdata(dev, master);
 	mps = spi_master_get_devdata(master);
 
+	/* the spi->mode bits understood by this driver: */
+	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
+
 	mps->irq = irq;
 	if (pdata == NULL) {
 		dev_warn(dev, "probe called without platform data, no "
-				"(de)activate_cs function will be called\n");
-		mps->activate_cs = NULL;
-		mps->deactivate_cs = NULL;
+				"cs_control function will be called\n");
+		mps->cs_control = NULL;
 		mps->sysclk = 0;
 		master->bus_num = bus_num;
 		master->num_chipselect = 255;
 	} else {
-		mps->activate_cs = pdata->activate_cs;
-		mps->deactivate_cs = pdata->deactivate_cs;
+		mps->cs_control = pdata->cs_control;
 		mps->sysclk = pdata->sysclk;
 		master->bus_num = pdata->bus_num;
 		master->num_chipselect = pdata->max_chipselect;
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c
index d6d0c5d241c..eee4b6e0af2 100644
--- a/drivers/spi/omap2_mcspi.c
+++ b/drivers/spi/omap2_mcspi.c
@@ -603,9 +603,6 @@ static int omap2_mcspi_request_dma(struct spi_device *spi)
 	return 0;
 }
 
-/* the spi->mode bits understood by this driver: */
-#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH)
-
 static int omap2_mcspi_setup(struct spi_device *spi)
 {
 	int			ret;
@@ -613,15 +610,7 @@ static int omap2_mcspi_setup(struct spi_device *spi)
 	struct omap2_mcspi_dma	*mcspi_dma;
 	struct omap2_mcspi_cs	*cs = spi->controller_state;
 
-	if (spi->mode & ~MODEBITS) {
-		dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n",
-			spi->mode & ~MODEBITS);
-		return -EINVAL;
-	}
-
-	if (spi->bits_per_word == 0)
-		spi->bits_per_word = 8;
-	else if (spi->bits_per_word < 4 || spi->bits_per_word > 32) {
+	if (spi->bits_per_word < 4 || spi->bits_per_word > 32) {
 		dev_dbg(&spi->dev, "setup: unsupported %d bit words\n",
 			spi->bits_per_word);
 		return -EINVAL;
@@ -984,6 +973,9 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	/* the spi->mode bits understood by this driver: */
+	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+
 	if (pdev->id != -1)
 		master->bus_num = pdev->id;
 
diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c
index fe8b9ac0cce..aa90ddb3706 100644
--- a/drivers/spi/omap_uwire.c
+++ b/drivers/spi/omap_uwire.c
@@ -339,8 +339,6 @@ static int uwire_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
 	bits = spi->bits_per_word;
 	if (t != NULL && t->bits_per_word)
 		bits = t->bits_per_word;
-	if (!bits)
-		bits = 8;
 
 	if (bits > 16) {
 		pr_debug("%s: wordsize %d?\n", dev_name(&spi->dev), bits);
@@ -449,19 +447,10 @@ done:
 	return status;
 }
 
-/* the spi->mode bits understood by this driver: */
-#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH)
-
 static int uwire_setup(struct spi_device *spi)
 {
 	struct uwire_state *ust = spi->controller_state;
 
-	if (spi->mode & ~MODEBITS) {
-		dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n",
-			spi->mode & ~MODEBITS);
-		return -EINVAL;
-	}
-
 	if (ust == NULL) {
 		ust = kzalloc(sizeof(*ust), GFP_KERNEL);
 		if (ust == NULL)
@@ -522,6 +511,9 @@ static int __init uwire_probe(struct platform_device *pdev)
 
 	uwire_write_reg(UWIRE_SR3, 1);
 
+	/* the spi->mode bits understood by this driver: */
+	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+
 	master->bus_num = 2;	/* "official" */
 	master->num_chipselect = 4;
 	master->setup = uwire_setup;
diff --git a/drivers/spi/orion_spi.c b/drivers/spi/orion_spi.c
index c8b0babdc2a..3aea50da7b2 100644
--- a/drivers/spi/orion_spi.c
+++ b/drivers/spi/orion_spi.c
@@ -358,20 +358,11 @@ static int orion_spi_setup(struct spi_device *spi)
 
 	orion_spi = spi_master_get_devdata(spi->master);
 
-	if (spi->mode) {
-		dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
-			spi->mode);
-		return -EINVAL;
-	}
-
 	/* Fix ac timing if required.   */
 	if (orion_spi->spi_info->enable_clock_fix)
 		orion_spi_setbits(orion_spi, ORION_SPI_IF_CONFIG_REG,
 				  (1 << 14));
 
-	if (spi->bits_per_word == 0)
-		spi->bits_per_word = 8;
-
 	if ((spi->max_speed_hz == 0)
 			|| (spi->max_speed_hz > orion_spi->max_speed))
 		spi->max_speed_hz = orion_spi->max_speed;
@@ -476,6 +467,9 @@ static int __init orion_spi_probe(struct platform_device *pdev)
 	if (pdev->id != -1)
 		master->bus_num = pdev->id;
 
+	/* we support only mode 0, and no options */
+	master->mode_bits = 0;
+
 	master->setup = orion_spi_setup;
 	master->transfer = orion_spi_transfer;
 	master->num_chipselect = ORION_NUM_CHIPSELECTS;
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 3f3c08c6ba4..d949dbf1141 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -1185,9 +1185,6 @@ static int transfer(struct spi_device *spi, struct spi_message *msg)
 	return 0;
 }
 
-/* the spi->mode bits understood by this driver: */
-#define MODEBITS (SPI_CPOL | SPI_CPHA)
-
 static int setup_cs(struct spi_device *spi, struct chip_data *chip,
 		    struct pxa2xx_spi_chip *chip_info)
 {
@@ -1236,9 +1233,6 @@ static int setup(struct spi_device *spi)
 	uint tx_thres = TX_THRESH_DFLT;
 	uint rx_thres = RX_THRESH_DFLT;
 
-	if (!spi->bits_per_word)
-		spi->bits_per_word = 8;
-
 	if (drv_data->ssp_type != PXA25x_SSP
 		&& (spi->bits_per_word < 4 || spi->bits_per_word > 32)) {
 		dev_err(&spi->dev, "failed setup: ssp_type=%d, bits/wrd=%d "
@@ -1255,12 +1249,6 @@ static int setup(struct spi_device *spi)
 		return -EINVAL;
 	}
 
-	if (spi->mode & ~MODEBITS) {
-		dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n",
-			spi->mode & ~MODEBITS);
-		return -EINVAL;
-	}
-
 	/* Only alloc on first setup */
 	chip = spi_get_ctldata(spi);
 	if (!chip) {
@@ -1328,18 +1316,14 @@ static int setup(struct spi_device *spi)
 
 	/* NOTE:  PXA25x_SSP _could_ use external clocking ... */
 	if (drv_data->ssp_type != PXA25x_SSP)
-		dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d, %s\n",
-				spi->bits_per_word,
+		dev_dbg(&spi->dev, "%ld Hz actual, %s\n",
 				clk_get_rate(ssp->clk)
 					/ (1 + ((chip->cr0 & SSCR0_SCR) >> 8)),
-				spi->mode & 0x3,
 				chip->enable_dma ? "DMA" : "PIO");
 	else
-		dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d, %s\n",
-				spi->bits_per_word,
+		dev_dbg(&spi->dev, "%ld Hz actual, %s\n",
 				clk_get_rate(ssp->clk) / 2
 					/ (1 + ((chip->cr0 & SSCR0_SCR) >> 8)),
-				spi->mode & 0x3,
 				chip->enable_dma ? "DMA" : "PIO");
 
 	if (spi->bits_per_word <= 8) {
@@ -1500,6 +1484,9 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev)
 	drv_data->pdev = pdev;
 	drv_data->ssp = ssp;
 
+	/* the spi->mode bits understood by this driver: */
+	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+
 	master->bus_num = pdev->id;
 	master->num_chipselect = platform_info->num_chipselect;
 	master->dma_alignment = DMA_ALIGNMENT;
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 8eba98c8ed1..70845ccd85c 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -265,7 +265,7 @@ int spi_add_device(struct spi_device *spi)
 	 * normally rely on the device being setup.  Devices
 	 * using SPI_CS_HIGH can't coexist well otherwise...
 	 */
-	status = spi->master->setup(spi);
+	status = spi_setup(spi);
 	if (status < 0) {
 		dev_err(dev, "can't %s %s, status %d\n",
 				"setup", dev_name(&spi->dev), status);
@@ -583,6 +583,70 @@ EXPORT_SYMBOL_GPL(spi_busnum_to_master);
 
 /*-------------------------------------------------------------------------*/
 
+/* Core methods for SPI master protocol drivers.  Some of the
+ * other core methods are currently defined as inline functions.
+ */
+
+/**
+ * spi_setup - setup SPI mode and clock rate
+ * @spi: the device whose settings are being modified
+ * Context: can sleep, and no requests are queued to the device
+ *
+ * SPI protocol drivers may need to update the transfer mode if the
+ * device doesn't work with its default.  They may likewise need
+ * to update clock rates or word sizes from initial values.  This function
+ * changes those settings, and must be called from a context that can sleep.
+ * Except for SPI_CS_HIGH, which takes effect immediately, the changes take
+ * effect the next time the device is selected and data is transferred to
+ * or from it.  When this function returns, the spi device is deselected.
+ *
+ * Note that this call will fail if the protocol driver specifies an option
+ * that the underlying controller or its driver does not support.  For
+ * example, not all hardware supports wire transfers using nine bit words,
+ * LSB-first wire encoding, or active-high chipselects.
+ */
+int spi_setup(struct spi_device *spi)
+{
+	unsigned	bad_bits;
+	int		status;
+
+	/* help drivers fail *cleanly* when they need options
+	 * that aren't supported with their current master
+	 */
+	bad_bits = spi->mode & ~spi->master->mode_bits;
+	if (bad_bits) {
+		dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n",
+			bad_bits);
+		return -EINVAL;
+	}
+
+	if (!spi->bits_per_word)
+		spi->bits_per_word = 8;
+
+	status = spi->master->setup(spi);
+
+	dev_dbg(&spi->dev, "setup mode %d, %s%s%s%s"
+				"%u bits/w, %u Hz max --> %d\n",
+			(int) (spi->mode & (SPI_CPOL | SPI_CPHA)),
+			(spi->mode & SPI_CS_HIGH) ? "cs_high, " : "",
+			(spi->mode & SPI_LSB_FIRST) ? "lsb, " : "",
+			(spi->mode & SPI_3WIRE) ? "3wire, " : "",
+			(spi->mode & SPI_LOOP) ? "loopback, " : "",
+			spi->bits_per_word, spi->max_speed_hz,
+			status);
+
+	return status;
+}
+EXPORT_SYMBOL_GPL(spi_setup);
+
+
+/*-------------------------------------------------------------------------*/
+
+/* Utility methods for SPI master protocol drivers, layered on
+ * top of the core.  Some other utility methods are defined as
+ * inline functions.
+ */
+
 static void spi_complete(void *arg)
 {
 	complete(arg);
@@ -636,8 +700,8 @@ static u8	*buf;
  * @spi: device with which data will be exchanged
  * @txbuf: data to be written (need not be dma-safe)
  * @n_tx: size of txbuf, in bytes
- * @rxbuf: buffer into which data will be read
- * @n_rx: size of rxbuf, in bytes (need not be dma-safe)
+ * @rxbuf: buffer into which data will be read (need not be dma-safe)
+ * @n_rx: size of rxbuf, in bytes
  * Context: can sleep
  *
  * This performs a half duplex MicroWire style transaction with the
diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
index 011c5bddba6..73e24ef5a2f 100644
--- a/drivers/spi/spi_bfin5xx.c
+++ b/drivers/spi/spi_bfin5xx.c
@@ -169,7 +169,7 @@ static int bfin_spi_flush(struct driver_data *drv_data)
 	unsigned long limit = loops_per_jiffy << 1;
 
 	/* wait for stop and clear stat */
-	while (!(read_STAT(drv_data) & BIT_STAT_SPIF) && limit--)
+	while (!(read_STAT(drv_data) & BIT_STAT_SPIF) && --limit)
 		cpu_relax();
 
 	write_STAT(drv_data, BIT_STAT_CLR);
@@ -1010,16 +1010,6 @@ static int bfin_spi_setup(struct spi_device *spi)
 	struct driver_data *drv_data = spi_master_get_devdata(spi->master);
 	int ret;
 
-	/* Abort device setup if requested features are not supported */
-	if (spi->mode & ~(SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST)) {
-		dev_err(&spi->dev, "requested mode not fully supported\n");
-		return -EINVAL;
-	}
-
-	/* Zero (the default) here means 8 bits */
-	if (!spi->bits_per_word)
-		spi->bits_per_word = 8;
-
 	if (spi->bits_per_word != 8 && spi->bits_per_word != 16)
 		return -EINVAL;
 
@@ -1287,6 +1277,9 @@ static int __init bfin_spi_probe(struct platform_device *pdev)
 	drv_data->pdev = pdev;
 	drv_data->pin_req = platform_info->pin_req;
 
+	/* the spi->mode bits supported by this driver: */
+	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
+
 	master->bus_num = pdev->id;
 	master->num_chipselect = platform_info->num_chipselect;
 	master->cleanup = bfin_spi_cleanup;
diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c
index 85e61f45121..2a5abc08e85 100644
--- a/drivers/spi/spi_bitbang.c
+++ b/drivers/spi/spi_bitbang.c
@@ -188,12 +188,6 @@ int spi_bitbang_setup(struct spi_device *spi)
 
 	bitbang = spi_master_get_devdata(spi->master);
 
-	/* Bitbangers can support SPI_CS_HIGH, SPI_3WIRE, and so on;
-	 * add those to master->flags, and provide the other support.
-	 */
-	if ((spi->mode & ~(SPI_CPOL|SPI_CPHA|bitbang->flags)) != 0)
-		return -EINVAL;
-
 	if (!cs) {
 		cs = kzalloc(sizeof *cs, GFP_KERNEL);
 		if (!cs)
@@ -201,9 +195,6 @@ int spi_bitbang_setup(struct spi_device *spi)
 		spi->controller_state = cs;
 	}
 
-	if (!spi->bits_per_word)
-		spi->bits_per_word = 8;
-
 	/* per-word shift register access, in hardware or bitbanging */
 	cs->txrx_word = bitbang->txrx_word[spi->mode & (SPI_CPOL|SPI_CPHA)];
 	if (!cs->txrx_word)
@@ -213,9 +204,7 @@ int spi_bitbang_setup(struct spi_device *spi)
 	if (retval < 0)
 		return retval;
 
-	dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
-			__func__, spi->mode & (SPI_CPOL | SPI_CPHA),
-			spi->bits_per_word, 2 * cs->nsecs);
+	dev_dbg(&spi->dev, "%s, %u nsec/bit\n", __func__, 2 * cs->nsecs);
 
 	/* NOTE we _need_ to call chipselect() early, ideally with adapter
 	 * setup, unless the hardware defaults cooperate to avoid confusion
@@ -457,6 +446,9 @@ int spi_bitbang_start(struct spi_bitbang *bitbang)
 	spin_lock_init(&bitbang->lock);
 	INIT_LIST_HEAD(&bitbang->queue);
 
+	if (!bitbang->master->mode_bits)
+		bitbang->master->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags;
+
 	if (!bitbang->master->transfer)
 		bitbang->master->transfer = spi_bitbang_transfer;
 	if (!bitbang->txrx_bufs) {
diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
index 0671aeef579..c195e45f7f3 100644
--- a/drivers/spi/spi_imx.c
+++ b/drivers/spi/spi_imx.c
@@ -1171,9 +1171,6 @@ msg_rejected:
 	return -EINVAL;
 }
 
-/* the spi->mode bits understood by this driver: */
-#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH)
-
 /* On first setup bad values must free chip_data memory since will cause
    spi_new_device to fail. Bad value setup from protocol driver are simply not
    applied and notified to the calling driver. */
@@ -1186,12 +1183,6 @@ static int setup(struct spi_device *spi)
 	u32 tmp;
 	int status = 0;
 
-	if (spi->mode & ~MODEBITS) {
-		dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n",
-			spi->mode & ~MODEBITS);
-		return -EINVAL;
-	}
-
 	/* Get controller data */
 	chip_info = spi->controller_data;
 
@@ -1286,10 +1277,7 @@ static int setup(struct spi_device *spi)
 
 	/* SPI word width */
 	tmp = spi->bits_per_word;
-	if (tmp == 0) {
-		tmp = 8;
-		spi->bits_per_word = 8;
-	} else if (tmp > 16) {
+	if (tmp > 16) {
 		status = -EINVAL;
 		dev_err(&spi->dev,
 			"setup - "
@@ -1481,6 +1469,9 @@ static int __init spi_imx_probe(struct platform_device *pdev)
 	drv_data->master_info = platform_info;
 	drv_data->pdev = pdev;
 
+	/* the spi->mode bits understood by this driver: */
+	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+
 	master->bus_num = pdev->id;
 	master->num_chipselect = platform_info->num_chipselect;
 	master->dma_alignment = DMA_ALIGNMENT;
diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc8xxx.c
index a32ccb44065..0fd0ec4d3a7 100644
--- a/drivers/spi/spi_mpc83xx.c
+++ b/drivers/spi/spi_mpc8xxx.c
@@ -1,5 +1,5 @@
 /*
- * MPC83xx SPI controller driver.
+ * MPC8xxx SPI controller driver.
  *
  * Maintainer: Kumar Gala
  *
@@ -14,8 +14,10 @@
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
+#include <linux/bug.h>
 #include <linux/errno.h>
 #include <linux/err.h>
+#include <linux/io.h>
 #include <linux/completion.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
@@ -33,10 +35,9 @@
 
 #include <sysdev/fsl_soc.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 
 /* SPI Controller registers */
-struct mpc83xx_spi_reg {
+struct mpc8xxx_spi_reg {
 	u8 res1[0x20];
 	__be32 mode;
 	__be32 event;
@@ -75,16 +76,16 @@ struct mpc83xx_spi_reg {
 #define	SPIM_NF		0x00000100	/* Not full */
 
 /* SPI Controller driver's private data. */
-struct mpc83xx_spi {
-	struct mpc83xx_spi_reg __iomem *base;
+struct mpc8xxx_spi {
+	struct mpc8xxx_spi_reg __iomem *base;
 
 	/* rx & tx bufs from the spi_transfer */
 	const void *tx;
 	void *rx;
 
 	/* functions to deal with different sized buffers */
-	void (*get_rx) (u32 rx_data, struct mpc83xx_spi *);
-	u32(*get_tx) (struct mpc83xx_spi *);
+	void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *);
+	u32(*get_tx) (struct mpc8xxx_spi *);
 
 	unsigned int count;
 	unsigned int irq;
@@ -97,8 +98,6 @@ struct mpc83xx_spi {
 
 	bool qe_mode;
 
-	u8 busy;
-
 	struct workqueue_struct *workqueue;
 	struct work_struct work;
 
@@ -108,44 +107,44 @@ struct mpc83xx_spi {
 	struct completion done;
 };
 
-struct spi_mpc83xx_cs {
+struct spi_mpc8xxx_cs {
 	/* functions to deal with different sized buffers */
-	void (*get_rx) (u32 rx_data, struct mpc83xx_spi *);
-	u32 (*get_tx) (struct mpc83xx_spi *);
+	void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *);
+	u32 (*get_tx) (struct mpc8xxx_spi *);
 	u32 rx_shift;		/* RX data reg shift when in qe mode */
 	u32 tx_shift;		/* TX data reg shift when in qe mode */
 	u32 hw_mode;		/* Holds HW mode register settings */
 };
 
-static inline void mpc83xx_spi_write_reg(__be32 __iomem * reg, u32 val)
+static inline void mpc8xxx_spi_write_reg(__be32 __iomem *reg, u32 val)
 {
 	out_be32(reg, val);
 }
 
-static inline u32 mpc83xx_spi_read_reg(__be32 __iomem * reg)
+static inline u32 mpc8xxx_spi_read_reg(__be32 __iomem *reg)
 {
 	return in_be32(reg);
 }
 
 #define MPC83XX_SPI_RX_BUF(type) 					  \
 static									  \
-void mpc83xx_spi_rx_buf_##type(u32 data, struct mpc83xx_spi *mpc83xx_spi) \
+void mpc8xxx_spi_rx_buf_##type(u32 data, struct mpc8xxx_spi *mpc8xxx_spi) \
 {									  \
-	type * rx = mpc83xx_spi->rx;					  \
-	*rx++ = (type)(data >> mpc83xx_spi->rx_shift);			  \
-	mpc83xx_spi->rx = rx;						  \
+	type *rx = mpc8xxx_spi->rx;					  \
+	*rx++ = (type)(data >> mpc8xxx_spi->rx_shift);			  \
+	mpc8xxx_spi->rx = rx;						  \
 }
 
 #define MPC83XX_SPI_TX_BUF(type)				\
 static								\
-u32 mpc83xx_spi_tx_buf_##type(struct mpc83xx_spi *mpc83xx_spi)	\
+u32 mpc8xxx_spi_tx_buf_##type(struct mpc8xxx_spi *mpc8xxx_spi)	\
 {								\
 	u32 data;						\
-	const type * tx = mpc83xx_spi->tx;			\
+	const type *tx = mpc8xxx_spi->tx;			\
 	if (!tx)						\
 		return 0;					\
-	data = *tx++ << mpc83xx_spi->tx_shift;			\
-	mpc83xx_spi->tx = tx;					\
+	data = *tx++ << mpc8xxx_spi->tx_shift;			\
+	mpc8xxx_spi->tx = tx;					\
 	return data;						\
 }
 
@@ -156,12 +155,12 @@ MPC83XX_SPI_TX_BUF(u8)
 MPC83XX_SPI_TX_BUF(u16)
 MPC83XX_SPI_TX_BUF(u32)
 
-static void mpc83xx_spi_chipselect(struct spi_device *spi, int value)
+static void mpc8xxx_spi_chipselect(struct spi_device *spi, int value)
 {
-	struct mpc83xx_spi *mpc83xx_spi = spi_master_get_devdata(spi->master);
+	struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master);
 	struct fsl_spi_platform_data *pdata = spi->dev.parent->platform_data;
 	bool pol = spi->mode & SPI_CS_HIGH;
-	struct spi_mpc83xx_cs	*cs = spi->controller_state;
+	struct spi_mpc8xxx_cs	*cs = spi->controller_state;
 
 	if (value == BITBANG_CS_INACTIVE) {
 		if (pdata->cs_control)
@@ -169,16 +168,16 @@ static void mpc83xx_spi_chipselect(struct spi_device *spi, int value)
 	}
 
 	if (value == BITBANG_CS_ACTIVE) {
-		u32 regval = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
+		u32 regval = mpc8xxx_spi_read_reg(&mpc8xxx_spi->base->mode);
 
-		mpc83xx_spi->rx_shift = cs->rx_shift;
-		mpc83xx_spi->tx_shift = cs->tx_shift;
-		mpc83xx_spi->get_rx = cs->get_rx;
-		mpc83xx_spi->get_tx = cs->get_tx;
+		mpc8xxx_spi->rx_shift = cs->rx_shift;
+		mpc8xxx_spi->tx_shift = cs->tx_shift;
+		mpc8xxx_spi->get_rx = cs->get_rx;
+		mpc8xxx_spi->get_tx = cs->get_tx;
 
 		if (cs->hw_mode != regval) {
 			unsigned long flags;
-			__be32 __iomem *mode = &mpc83xx_spi->base->mode;
+			__be32 __iomem *mode = &mpc8xxx_spi->base->mode;
 
 			regval = cs->hw_mode;
 			/* Turn off IRQs locally to minimize time that
@@ -186,8 +185,8 @@ static void mpc83xx_spi_chipselect(struct spi_device *spi, int value)
 			 */
 			local_irq_save(flags);
 			/* Turn off SPI unit prior changing mode */
-			mpc83xx_spi_write_reg(mode, regval & ~SPMODE_ENABLE);
-			mpc83xx_spi_write_reg(mode, regval);
+			mpc8xxx_spi_write_reg(mode, regval & ~SPMODE_ENABLE);
+			mpc8xxx_spi_write_reg(mode, regval);
 			local_irq_restore(flags);
 		}
 		if (pdata->cs_control)
@@ -196,15 +195,15 @@ static void mpc83xx_spi_chipselect(struct spi_device *spi, int value)
 }
 
 static
-int mpc83xx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
+int mpc8xxx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
 {
-	struct mpc83xx_spi *mpc83xx_spi;
+	struct mpc8xxx_spi *mpc8xxx_spi;
 	u32 regval;
 	u8 bits_per_word, pm;
 	u32 hz;
-	struct spi_mpc83xx_cs	*cs = spi->controller_state;
+	struct spi_mpc8xxx_cs	*cs = spi->controller_state;
 
-	mpc83xx_spi = spi_master_get_devdata(spi->master);
+	mpc8xxx_spi = spi_master_get_devdata(spi->master);
 
 	if (t) {
 		bits_per_word = t->bits_per_word;
@@ -229,26 +228,26 @@ int mpc83xx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
 	cs->rx_shift = 0;
 	cs->tx_shift = 0;
 	if (bits_per_word <= 8) {
-		cs->get_rx = mpc83xx_spi_rx_buf_u8;
-		cs->get_tx = mpc83xx_spi_tx_buf_u8;
-		if (mpc83xx_spi->qe_mode) {
+		cs->get_rx = mpc8xxx_spi_rx_buf_u8;
+		cs->get_tx = mpc8xxx_spi_tx_buf_u8;
+		if (mpc8xxx_spi->qe_mode) {
 			cs->rx_shift = 16;
 			cs->tx_shift = 24;
 		}
 	} else if (bits_per_word <= 16) {
-		cs->get_rx = mpc83xx_spi_rx_buf_u16;
-		cs->get_tx = mpc83xx_spi_tx_buf_u16;
-		if (mpc83xx_spi->qe_mode) {
+		cs->get_rx = mpc8xxx_spi_rx_buf_u16;
+		cs->get_tx = mpc8xxx_spi_tx_buf_u16;
+		if (mpc8xxx_spi->qe_mode) {
 			cs->rx_shift = 16;
 			cs->tx_shift = 16;
 		}
 	} else if (bits_per_word <= 32) {
-		cs->get_rx = mpc83xx_spi_rx_buf_u32;
-		cs->get_tx = mpc83xx_spi_tx_buf_u32;
+		cs->get_rx = mpc8xxx_spi_rx_buf_u32;
+		cs->get_tx = mpc8xxx_spi_tx_buf_u32;
 	} else
 		return -EINVAL;
 
-	if (mpc83xx_spi->qe_mode && spi->mode & SPI_LSB_FIRST) {
+	if (mpc8xxx_spi->qe_mode && spi->mode & SPI_LSB_FIRST) {
 		cs->tx_shift = 0;
 		if (bits_per_word <= 8)
 			cs->rx_shift = 8;
@@ -256,10 +255,10 @@ int mpc83xx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
 			cs->rx_shift = 0;
 	}
 
-	mpc83xx_spi->rx_shift = cs->rx_shift;
-	mpc83xx_spi->tx_shift = cs->tx_shift;
-	mpc83xx_spi->get_rx = cs->get_rx;
-	mpc83xx_spi->get_tx = cs->get_tx;
+	mpc8xxx_spi->rx_shift = cs->rx_shift;
+	mpc8xxx_spi->tx_shift = cs->tx_shift;
+	mpc8xxx_spi->get_rx = cs->get_rx;
+	mpc8xxx_spi->get_tx = cs->get_tx;
 
 	if (bits_per_word == 32)
 		bits_per_word = 0;
@@ -272,25 +271,25 @@ int mpc83xx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
 
 	cs->hw_mode |= SPMODE_LEN(bits_per_word);
 
-	if ((mpc83xx_spi->spibrg / hz) > 64) {
+	if ((mpc8xxx_spi->spibrg / hz) > 64) {
 		cs->hw_mode |= SPMODE_DIV16;
-		pm = mpc83xx_spi->spibrg / (hz * 64);
-		if (pm > 16) {
-			dev_err(&spi->dev, "Requested speed is too "
-				"low: %d Hz. Will use %d Hz instead.\n",
-				hz, mpc83xx_spi->spibrg / 1024);
+		pm = mpc8xxx_spi->spibrg / (hz * 64);
+
+		WARN_ONCE(pm > 16, "%s: Requested speed is too low: %d Hz. "
+			  "Will use %d Hz instead.\n", dev_name(&spi->dev),
+			  hz, mpc8xxx_spi->spibrg / 1024);
+		if (pm > 16)
 			pm = 16;
-		}
 	} else
-		pm = mpc83xx_spi->spibrg / (hz * 4);
+		pm = mpc8xxx_spi->spibrg / (hz * 4);
 	if (pm)
 		pm--;
 
 	cs->hw_mode |= SPMODE_PM(pm);
-	regval =  mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
+	regval =  mpc8xxx_spi_read_reg(&mpc8xxx_spi->base->mode);
 	if (cs->hw_mode != regval) {
 		unsigned long flags;
-		__be32 __iomem *mode = &mpc83xx_spi->base->mode;
+		__be32 __iomem *mode = &mpc8xxx_spi->base->mode;
 
 		regval = cs->hw_mode;
 		/* Turn off IRQs locally to minimize time
@@ -298,22 +297,22 @@ int mpc83xx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
 		 */
 		local_irq_save(flags);
 		/* Turn off SPI unit prior changing mode */
-		mpc83xx_spi_write_reg(mode, regval & ~SPMODE_ENABLE);
-		mpc83xx_spi_write_reg(mode, regval);
+		mpc8xxx_spi_write_reg(mode, regval & ~SPMODE_ENABLE);
+		mpc8xxx_spi_write_reg(mode, regval);
 		local_irq_restore(flags);
 	}
 	return 0;
 }
 
-static int mpc83xx_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
+static int mpc8xxx_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
 {
-	struct mpc83xx_spi *mpc83xx_spi;
+	struct mpc8xxx_spi *mpc8xxx_spi;
 	u32 word, len, bits_per_word;
 
-	mpc83xx_spi = spi_master_get_devdata(spi->master);
+	mpc8xxx_spi = spi_master_get_devdata(spi->master);
 
-	mpc83xx_spi->tx = t->tx_buf;
-	mpc83xx_spi->rx = t->rx_buf;
+	mpc8xxx_spi->tx = t->tx_buf;
+	mpc8xxx_spi->rx = t->rx_buf;
 	bits_per_word = spi->bits_per_word;
 	if (t->bits_per_word)
 		bits_per_word = t->bits_per_word;
@@ -330,111 +329,106 @@ static int mpc83xx_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
 			return -EINVAL;
 		len /= 2;
 	}
-	mpc83xx_spi->count = len;
+	mpc8xxx_spi->count = len;
 
-	INIT_COMPLETION(mpc83xx_spi->done);
+	INIT_COMPLETION(mpc8xxx_spi->done);
 
 	/* enable rx ints */
-	mpc83xx_spi_write_reg(&mpc83xx_spi->base->mask, SPIM_NE);
+	mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mask, SPIM_NE);
 
 	/* transmit word */
-	word = mpc83xx_spi->get_tx(mpc83xx_spi);
-	mpc83xx_spi_write_reg(&mpc83xx_spi->base->transmit, word);
+	word = mpc8xxx_spi->get_tx(mpc8xxx_spi);
+	mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->transmit, word);
 
-	wait_for_completion(&mpc83xx_spi->done);
+	wait_for_completion(&mpc8xxx_spi->done);
 
 	/* disable rx ints */
-	mpc83xx_spi_write_reg(&mpc83xx_spi->base->mask, 0);
+	mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mask, 0);
 
-	return mpc83xx_spi->count;
+	return mpc8xxx_spi->count;
 }
 
-static void mpc83xx_spi_work(struct work_struct *work)
+static void mpc8xxx_spi_do_one_msg(struct spi_message *m)
 {
-	struct mpc83xx_spi *mpc83xx_spi =
-		container_of(work, struct mpc83xx_spi, work);
-
-	spin_lock_irq(&mpc83xx_spi->lock);
-	mpc83xx_spi->busy = 1;
-	while (!list_empty(&mpc83xx_spi->queue)) {
-		struct spi_message *m;
-		struct spi_device *spi;
-		struct spi_transfer *t = NULL;
-		unsigned cs_change;
-		int status, nsecs = 50;
-
-		m = container_of(mpc83xx_spi->queue.next,
-				struct spi_message, queue);
-		list_del_init(&m->queue);
-		spin_unlock_irq(&mpc83xx_spi->lock);
-
-		spi = m->spi;
-		cs_change = 1;
-		status = 0;
-		list_for_each_entry(t, &m->transfers, transfer_list) {
-			if (t->bits_per_word || t->speed_hz) {
-				/* Don't allow changes if CS is active */
-				status = -EINVAL;
-
-				if (cs_change)
-					status = mpc83xx_spi_setup_transfer(spi, t);
-				if (status < 0)
-					break;
-			}
+	struct spi_device *spi = m->spi;
+	struct spi_transfer *t;
+	unsigned int cs_change;
+	const int nsecs = 50;
+	int status;
+
+	cs_change = 1;
+	status = 0;
+	list_for_each_entry(t, &m->transfers, transfer_list) {
+		if (t->bits_per_word || t->speed_hz) {
+			/* Don't allow changes if CS is active */
+			status = -EINVAL;
 
 			if (cs_change)
-				mpc83xx_spi_chipselect(spi, BITBANG_CS_ACTIVE);
-			cs_change = t->cs_change;
-			if (t->len)
-				status = mpc83xx_spi_bufs(spi, t);
-			if (status) {
-				status = -EMSGSIZE;
+				status = mpc8xxx_spi_setup_transfer(spi, t);
+			if (status < 0)
 				break;
-			}
-			m->actual_length += t->len;
-
-			if (t->delay_usecs)
-				udelay(t->delay_usecs);
+		}
 
-			if (cs_change) {
-				ndelay(nsecs);
-				mpc83xx_spi_chipselect(spi, BITBANG_CS_INACTIVE);
-				ndelay(nsecs);
-			}
+		if (cs_change) {
+			mpc8xxx_spi_chipselect(spi, BITBANG_CS_ACTIVE);
+			ndelay(nsecs);
+		}
+		cs_change = t->cs_change;
+		if (t->len)
+			status = mpc8xxx_spi_bufs(spi, t);
+		if (status) {
+			status = -EMSGSIZE;
+			break;
 		}
+		m->actual_length += t->len;
 
-		m->status = status;
-		m->complete(m->context);
+		if (t->delay_usecs)
+			udelay(t->delay_usecs);
 
-		if (status || !cs_change) {
+		if (cs_change) {
+			ndelay(nsecs);
+			mpc8xxx_spi_chipselect(spi, BITBANG_CS_INACTIVE);
 			ndelay(nsecs);
-			mpc83xx_spi_chipselect(spi, BITBANG_CS_INACTIVE);
 		}
+	}
 
-		mpc83xx_spi_setup_transfer(spi, NULL);
+	m->status = status;
+	m->complete(m->context);
 
-		spin_lock_irq(&mpc83xx_spi->lock);
+	if (status || !cs_change) {
+		ndelay(nsecs);
+		mpc8xxx_spi_chipselect(spi, BITBANG_CS_INACTIVE);
 	}
-	mpc83xx_spi->busy = 0;
-	spin_unlock_irq(&mpc83xx_spi->lock);
+
+	mpc8xxx_spi_setup_transfer(spi, NULL);
 }
 
-/* the spi->mode bits understood by this driver: */
-#define MODEBITS	(SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \
-			| SPI_LSB_FIRST | SPI_LOOP)
+static void mpc8xxx_spi_work(struct work_struct *work)
+{
+	struct mpc8xxx_spi *mpc8xxx_spi = container_of(work, struct mpc8xxx_spi,
+						       work);
+
+	spin_lock_irq(&mpc8xxx_spi->lock);
+	while (!list_empty(&mpc8xxx_spi->queue)) {
+		struct spi_message *m = container_of(mpc8xxx_spi->queue.next,
+						   struct spi_message, queue);
+
+		list_del_init(&m->queue);
+		spin_unlock_irq(&mpc8xxx_spi->lock);
+
+		mpc8xxx_spi_do_one_msg(m);
+
+		spin_lock_irq(&mpc8xxx_spi->lock);
+	}
+	spin_unlock_irq(&mpc8xxx_spi->lock);
+}
 
-static int mpc83xx_spi_setup(struct spi_device *spi)
+static int mpc8xxx_spi_setup(struct spi_device *spi)
 {
-	struct mpc83xx_spi *mpc83xx_spi;
+	struct mpc8xxx_spi *mpc8xxx_spi;
 	int retval;
 	u32 hw_mode;
-	struct spi_mpc83xx_cs	*cs = spi->controller_state;
-
-	if (spi->mode & ~MODEBITS) {
-		dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n",
-			spi->mode & ~MODEBITS);
-		return -EINVAL;
-	}
+	struct spi_mpc8xxx_cs	*cs = spi->controller_state;
 
 	if (!spi->max_speed_hz)
 		return -EINVAL;
@@ -445,13 +439,10 @@ static int mpc83xx_spi_setup(struct spi_device *spi)
 			return -ENOMEM;
 		spi->controller_state = cs;
 	}
-	mpc83xx_spi = spi_master_get_devdata(spi->master);
-
-	if (!spi->bits_per_word)
-		spi->bits_per_word = 8;
+	mpc8xxx_spi = spi_master_get_devdata(spi->master);
 
 	hw_mode = cs->hw_mode; /* Save orginal settings */
-	cs->hw_mode = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
+	cs->hw_mode = mpc8xxx_spi_read_reg(&mpc8xxx_spi->base->mode);
 	/* mask out bits we are going to set */
 	cs->hw_mode &= ~(SPMODE_CP_BEGIN_EDGECLK | SPMODE_CI_INACTIVEHIGH
 			 | SPMODE_REV | SPMODE_LOOP);
@@ -465,45 +456,29 @@ static int mpc83xx_spi_setup(struct spi_device *spi)
 	if (spi->mode & SPI_LOOP)
 		cs->hw_mode |= SPMODE_LOOP;
 
-	retval = mpc83xx_spi_setup_transfer(spi, NULL);
+	retval = mpc8xxx_spi_setup_transfer(spi, NULL);
 	if (retval < 0) {
 		cs->hw_mode = hw_mode; /* Restore settings */
 		return retval;
 	}
-
-	dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u Hz\n",
-		__func__, spi->mode & (SPI_CPOL | SPI_CPHA),
-		spi->bits_per_word, spi->max_speed_hz);
-#if 0 /* Don't think this is needed */
-	/* NOTE we _need_ to call chipselect() early, ideally with adapter
-	 * setup, unless the hardware defaults cooperate to avoid confusion
-	 * between normal (active low) and inverted chipselects.
-	 */
-
-	/* deselect chip (low or high) */
-	spin_lock(&mpc83xx_spi->lock);
-	if (!mpc83xx_spi->busy)
-		mpc83xx_spi_chipselect(spi, BITBANG_CS_INACTIVE);
-	spin_unlock(&mpc83xx_spi->lock);
-#endif
 	return 0;
 }
 
-static irqreturn_t mpc83xx_spi_irq(s32 irq, void *context_data)
+static irqreturn_t mpc8xxx_spi_irq(s32 irq, void *context_data)
 {
-	struct mpc83xx_spi *mpc83xx_spi = context_data;
+	struct mpc8xxx_spi *mpc8xxx_spi = context_data;
 	u32 event;
 	irqreturn_t ret = IRQ_NONE;
 
 	/* Get interrupt events(tx/rx) */
-	event = mpc83xx_spi_read_reg(&mpc83xx_spi->base->event);
+	event = mpc8xxx_spi_read_reg(&mpc8xxx_spi->base->event);
 
 	/* We need handle RX first */
 	if (event & SPIE_NE) {
-		u32 rx_data = mpc83xx_spi_read_reg(&mpc83xx_spi->base->receive);
+		u32 rx_data = mpc8xxx_spi_read_reg(&mpc8xxx_spi->base->receive);
 
-		if (mpc83xx_spi->rx)
-			mpc83xx_spi->get_rx(rx_data, mpc83xx_spi);
+		if (mpc8xxx_spi->rx)
+			mpc8xxx_spi->get_rx(rx_data, mpc8xxx_spi);
 
 		ret = IRQ_HANDLED;
 	}
@@ -511,56 +486,56 @@ static irqreturn_t mpc83xx_spi_irq(s32 irq, void *context_data)
 	if ((event & SPIE_NF) == 0)
 		/* spin until TX is done */
 		while (((event =
-			 mpc83xx_spi_read_reg(&mpc83xx_spi->base->event)) &
+			 mpc8xxx_spi_read_reg(&mpc8xxx_spi->base->event)) &
 						SPIE_NF) == 0)
-			 cpu_relax();
+			cpu_relax();
 
-	mpc83xx_spi->count -= 1;
-	if (mpc83xx_spi->count) {
-		u32 word = mpc83xx_spi->get_tx(mpc83xx_spi);
-		mpc83xx_spi_write_reg(&mpc83xx_spi->base->transmit, word);
+	mpc8xxx_spi->count -= 1;
+	if (mpc8xxx_spi->count) {
+		u32 word = mpc8xxx_spi->get_tx(mpc8xxx_spi);
+		mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->transmit, word);
 	} else {
-		complete(&mpc83xx_spi->done);
+		complete(&mpc8xxx_spi->done);
 	}
 
 	/* Clear the events */
-	mpc83xx_spi_write_reg(&mpc83xx_spi->base->event, event);
+	mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->event, event);
 
 	return ret;
 }
-static int mpc83xx_spi_transfer(struct spi_device *spi,
+static int mpc8xxx_spi_transfer(struct spi_device *spi,
 				struct spi_message *m)
 {
-	struct mpc83xx_spi *mpc83xx_spi = spi_master_get_devdata(spi->master);
+	struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master);
 	unsigned long flags;
 
 	m->actual_length = 0;
 	m->status = -EINPROGRESS;
 
-	spin_lock_irqsave(&mpc83xx_spi->lock, flags);
-	list_add_tail(&m->queue, &mpc83xx_spi->queue);
-	queue_work(mpc83xx_spi->workqueue, &mpc83xx_spi->work);
-	spin_unlock_irqrestore(&mpc83xx_spi->lock, flags);
+	spin_lock_irqsave(&mpc8xxx_spi->lock, flags);
+	list_add_tail(&m->queue, &mpc8xxx_spi->queue);
+	queue_work(mpc8xxx_spi->workqueue, &mpc8xxx_spi->work);
+	spin_unlock_irqrestore(&mpc8xxx_spi->lock, flags);
 
 	return 0;
 }
 
 
-static void mpc83xx_spi_cleanup(struct spi_device *spi)
+static void mpc8xxx_spi_cleanup(struct spi_device *spi)
 {
 	kfree(spi->controller_state);
 }
 
 static struct spi_master * __devinit
-mpc83xx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq)
+mpc8xxx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq)
 {
 	struct fsl_spi_platform_data *pdata = dev->platform_data;
 	struct spi_master *master;
-	struct mpc83xx_spi *mpc83xx_spi;
+	struct mpc8xxx_spi *mpc8xxx_spi;
 	u32 regval;
 	int ret = 0;
 
-	master = spi_alloc_master(dev, sizeof(struct mpc83xx_spi));
+	master = spi_alloc_master(dev, sizeof(struct mpc8xxx_spi));
 	if (master == NULL) {
 		ret = -ENOMEM;
 		goto err;
@@ -568,36 +543,40 @@ mpc83xx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq)
 
 	dev_set_drvdata(dev, master);
 
-	master->setup = mpc83xx_spi_setup;
-	master->transfer = mpc83xx_spi_transfer;
-	master->cleanup = mpc83xx_spi_cleanup;
-
-	mpc83xx_spi = spi_master_get_devdata(master);
-	mpc83xx_spi->qe_mode = pdata->qe_mode;
-	mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u8;
-	mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u8;
-	mpc83xx_spi->spibrg = pdata->sysclk;
-
-	mpc83xx_spi->rx_shift = 0;
-	mpc83xx_spi->tx_shift = 0;
-	if (mpc83xx_spi->qe_mode) {
-		mpc83xx_spi->rx_shift = 16;
-		mpc83xx_spi->tx_shift = 24;
+	/* the spi->mode bits understood by this driver: */
+	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH
+			| SPI_LSB_FIRST | SPI_LOOP;
+
+	master->setup = mpc8xxx_spi_setup;
+	master->transfer = mpc8xxx_spi_transfer;
+	master->cleanup = mpc8xxx_spi_cleanup;
+
+	mpc8xxx_spi = spi_master_get_devdata(master);
+	mpc8xxx_spi->qe_mode = pdata->qe_mode;
+	mpc8xxx_spi->get_rx = mpc8xxx_spi_rx_buf_u8;
+	mpc8xxx_spi->get_tx = mpc8xxx_spi_tx_buf_u8;
+	mpc8xxx_spi->spibrg = pdata->sysclk;
+
+	mpc8xxx_spi->rx_shift = 0;
+	mpc8xxx_spi->tx_shift = 0;
+	if (mpc8xxx_spi->qe_mode) {
+		mpc8xxx_spi->rx_shift = 16;
+		mpc8xxx_spi->tx_shift = 24;
 	}
 
-	init_completion(&mpc83xx_spi->done);
+	init_completion(&mpc8xxx_spi->done);
 
-	mpc83xx_spi->base = ioremap(mem->start, mem->end - mem->start + 1);
-	if (mpc83xx_spi->base == NULL) {
+	mpc8xxx_spi->base = ioremap(mem->start, mem->end - mem->start + 1);
+	if (mpc8xxx_spi->base == NULL) {
 		ret = -ENOMEM;
 		goto put_master;
 	}
 
-	mpc83xx_spi->irq = irq;
+	mpc8xxx_spi->irq = irq;
 
 	/* Register for SPI Interrupt */
-	ret = request_irq(mpc83xx_spi->irq, mpc83xx_spi_irq,
-			  0, "mpc83xx_spi", mpc83xx_spi);
+	ret = request_irq(mpc8xxx_spi->irq, mpc8xxx_spi_irq,
+			  0, "mpc8xxx_spi", mpc8xxx_spi);
 
 	if (ret != 0)
 		goto unmap_io;
@@ -606,25 +585,25 @@ mpc83xx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq)
 	master->num_chipselect = pdata->max_chipselect;
 
 	/* SPI controller initializations */
-	mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, 0);
-	mpc83xx_spi_write_reg(&mpc83xx_spi->base->mask, 0);
-	mpc83xx_spi_write_reg(&mpc83xx_spi->base->command, 0);
-	mpc83xx_spi_write_reg(&mpc83xx_spi->base->event, 0xffffffff);
+	mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mode, 0);
+	mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mask, 0);
+	mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->command, 0);
+	mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->event, 0xffffffff);
 
 	/* Enable SPI interface */
 	regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE;
 	if (pdata->qe_mode)
 		regval |= SPMODE_OP;
 
-	mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
-	spin_lock_init(&mpc83xx_spi->lock);
-	init_completion(&mpc83xx_spi->done);
-	INIT_WORK(&mpc83xx_spi->work, mpc83xx_spi_work);
-	INIT_LIST_HEAD(&mpc83xx_spi->queue);
+	mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mode, regval);
+	spin_lock_init(&mpc8xxx_spi->lock);
+	init_completion(&mpc8xxx_spi->done);
+	INIT_WORK(&mpc8xxx_spi->work, mpc8xxx_spi_work);
+	INIT_LIST_HEAD(&mpc8xxx_spi->queue);
 
-	mpc83xx_spi->workqueue = create_singlethread_workqueue(
+	mpc8xxx_spi->workqueue = create_singlethread_workqueue(
 		dev_name(master->dev.parent));
-	if (mpc83xx_spi->workqueue == NULL) {
+	if (mpc8xxx_spi->workqueue == NULL) {
 		ret = -EBUSY;
 		goto free_irq;
 	}
@@ -634,57 +613,57 @@ mpc83xx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq)
 		goto unreg_master;
 
 	printk(KERN_INFO
-	       "%s: MPC83xx SPI Controller driver at 0x%p (irq = %d)\n",
-	       dev_name(dev), mpc83xx_spi->base, mpc83xx_spi->irq);
+	       "%s: MPC8xxx SPI Controller driver at 0x%p (irq = %d)\n",
+	       dev_name(dev), mpc8xxx_spi->base, mpc8xxx_spi->irq);
 
 	return master;
 
 unreg_master:
-	destroy_workqueue(mpc83xx_spi->workqueue);
+	destroy_workqueue(mpc8xxx_spi->workqueue);
 free_irq:
-	free_irq(mpc83xx_spi->irq, mpc83xx_spi);
+	free_irq(mpc8xxx_spi->irq, mpc8xxx_spi);
 unmap_io:
-	iounmap(mpc83xx_spi->base);
+	iounmap(mpc8xxx_spi->base);
 put_master:
 	spi_master_put(master);
 err:
 	return ERR_PTR(ret);
 }
 
-static int __devexit mpc83xx_spi_remove(struct device *dev)
+static int __devexit mpc8xxx_spi_remove(struct device *dev)
 {
-	struct mpc83xx_spi *mpc83xx_spi;
+	struct mpc8xxx_spi *mpc8xxx_spi;
 	struct spi_master *master;
 
 	master = dev_get_drvdata(dev);
-	mpc83xx_spi = spi_master_get_devdata(master);
+	mpc8xxx_spi = spi_master_get_devdata(master);
 
-	flush_workqueue(mpc83xx_spi->workqueue);
-	destroy_workqueue(mpc83xx_spi->workqueue);
+	flush_workqueue(mpc8xxx_spi->workqueue);
+	destroy_workqueue(mpc8xxx_spi->workqueue);
 	spi_unregister_master(master);
 
-	free_irq(mpc83xx_spi->irq, mpc83xx_spi);
-	iounmap(mpc83xx_spi->base);
+	free_irq(mpc8xxx_spi->irq, mpc8xxx_spi);
+	iounmap(mpc8xxx_spi->base);
 
 	return 0;
 }
 
-struct mpc83xx_spi_probe_info {
+struct mpc8xxx_spi_probe_info {
 	struct fsl_spi_platform_data pdata;
 	int *gpios;
 	bool *alow_flags;
 };
 
-static struct mpc83xx_spi_probe_info *
+static struct mpc8xxx_spi_probe_info *
 to_of_pinfo(struct fsl_spi_platform_data *pdata)
 {
-	return container_of(pdata, struct mpc83xx_spi_probe_info, pdata);
+	return container_of(pdata, struct mpc8xxx_spi_probe_info, pdata);
 }
 
-static void mpc83xx_spi_cs_control(struct spi_device *spi, bool on)
+static void mpc8xxx_spi_cs_control(struct spi_device *spi, bool on)
 {
 	struct device *dev = spi->dev.parent;
-	struct mpc83xx_spi_probe_info *pinfo = to_of_pinfo(dev->platform_data);
+	struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(dev->platform_data);
 	u16 cs = spi->chip_select;
 	int gpio = pinfo->gpios[cs];
 	bool alow = pinfo->alow_flags[cs];
@@ -692,11 +671,11 @@ static void mpc83xx_spi_cs_control(struct spi_device *spi, bool on)
 	gpio_set_value(gpio, on ^ alow);
 }
 
-static int of_mpc83xx_spi_get_chipselects(struct device *dev)
+static int of_mpc8xxx_spi_get_chipselects(struct device *dev)
 {
 	struct device_node *np = dev_archdata_get_node(&dev->archdata);
 	struct fsl_spi_platform_data *pdata = dev->platform_data;
-	struct mpc83xx_spi_probe_info *pinfo = to_of_pinfo(pdata);
+	struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(pdata);
 	unsigned int ngpios;
 	int i = 0;
 	int ret;
@@ -752,7 +731,7 @@ static int of_mpc83xx_spi_get_chipselects(struct device *dev)
 	}
 
 	pdata->max_chipselect = ngpios;
-	pdata->cs_control = mpc83xx_spi_cs_control;
+	pdata->cs_control = mpc8xxx_spi_cs_control;
 
 	return 0;
 
@@ -771,10 +750,10 @@ err_alloc_flags:
 	return ret;
 }
 
-static int of_mpc83xx_spi_free_chipselects(struct device *dev)
+static int of_mpc8xxx_spi_free_chipselects(struct device *dev)
 {
 	struct fsl_spi_platform_data *pdata = dev->platform_data;
-	struct mpc83xx_spi_probe_info *pinfo = to_of_pinfo(pdata);
+	struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(pdata);
 	int i;
 
 	if (!pinfo->gpios)
@@ -790,12 +769,12 @@ static int of_mpc83xx_spi_free_chipselects(struct device *dev)
 	return 0;
 }
 
-static int __devinit of_mpc83xx_spi_probe(struct of_device *ofdev,
+static int __devinit of_mpc8xxx_spi_probe(struct of_device *ofdev,
 					  const struct of_device_id *ofid)
 {
 	struct device *dev = &ofdev->dev;
 	struct device_node *np = ofdev->node;
-	struct mpc83xx_spi_probe_info *pinfo;
+	struct mpc8xxx_spi_probe_info *pinfo;
 	struct fsl_spi_platform_data *pdata;
 	struct spi_master *master;
 	struct resource mem;
@@ -827,7 +806,7 @@ static int __devinit of_mpc83xx_spi_probe(struct of_device *ofdev,
 	if (prop && !strcmp(prop, "cpu-qe"))
 		pdata->qe_mode = 1;
 
-	ret = of_mpc83xx_spi_get_chipselects(dev);
+	ret = of_mpc8xxx_spi_get_chipselects(dev);
 	if (ret)
 		goto err;
 
@@ -841,7 +820,7 @@ static int __devinit of_mpc83xx_spi_probe(struct of_device *ofdev,
 		goto err;
 	}
 
-	master = mpc83xx_spi_probe(dev, &mem, irq.start);
+	master = mpc8xxx_spi_probe(dev, &mem, irq.start);
 	if (IS_ERR(master)) {
 		ret = PTR_ERR(master);
 		goto err;
@@ -852,34 +831,34 @@ static int __devinit of_mpc83xx_spi_probe(struct of_device *ofdev,
 	return 0;
 
 err:
-	of_mpc83xx_spi_free_chipselects(dev);
+	of_mpc8xxx_spi_free_chipselects(dev);
 err_clk:
 	kfree(pinfo);
 	return ret;
 }
 
-static int __devexit of_mpc83xx_spi_remove(struct of_device *ofdev)
+static int __devexit of_mpc8xxx_spi_remove(struct of_device *ofdev)
 {
 	int ret;
 
-	ret = mpc83xx_spi_remove(&ofdev->dev);
+	ret = mpc8xxx_spi_remove(&ofdev->dev);
 	if (ret)
 		return ret;
-	of_mpc83xx_spi_free_chipselects(&ofdev->dev);
+	of_mpc8xxx_spi_free_chipselects(&ofdev->dev);
 	return 0;
 }
 
-static const struct of_device_id of_mpc83xx_spi_match[] = {
+static const struct of_device_id of_mpc8xxx_spi_match[] = {
 	{ .compatible = "fsl,spi" },
 	{},
 };
-MODULE_DEVICE_TABLE(of, of_mpc83xx_spi_match);
+MODULE_DEVICE_TABLE(of, of_mpc8xxx_spi_match);
 
-static struct of_platform_driver of_mpc83xx_spi_driver = {
-	.name		= "mpc83xx_spi",
-	.match_table	= of_mpc83xx_spi_match,
-	.probe		= of_mpc83xx_spi_probe,
-	.remove		= __devexit_p(of_mpc83xx_spi_remove),
+static struct of_platform_driver of_mpc8xxx_spi_driver = {
+	.name		= "mpc8xxx_spi",
+	.match_table	= of_mpc8xxx_spi_match,
+	.probe		= of_mpc8xxx_spi_probe,
+	.remove		= __devexit_p(of_mpc8xxx_spi_remove),
 };
 
 #ifdef CONFIG_MPC832x_RDB
@@ -890,7 +869,7 @@ static struct of_platform_driver of_mpc83xx_spi_driver = {
  * tree can work with OpenFirmware driver. But for now we support old trees
  * as well.
  */
-static int __devinit plat_mpc83xx_spi_probe(struct platform_device *pdev)
+static int __devinit plat_mpc8xxx_spi_probe(struct platform_device *pdev)
 {
 	struct resource *mem;
 	unsigned int irq;
@@ -907,23 +886,23 @@ static int __devinit plat_mpc83xx_spi_probe(struct platform_device *pdev)
 	if (!irq)
 		return -EINVAL;
 
-	master = mpc83xx_spi_probe(&pdev->dev, mem, irq);
+	master = mpc8xxx_spi_probe(&pdev->dev, mem, irq);
 	if (IS_ERR(master))
 		return PTR_ERR(master);
 	return 0;
 }
 
-static int __devexit plat_mpc83xx_spi_remove(struct platform_device *pdev)
+static int __devexit plat_mpc8xxx_spi_remove(struct platform_device *pdev)
 {
-	return mpc83xx_spi_remove(&pdev->dev);
+	return mpc8xxx_spi_remove(&pdev->dev);
 }
 
-MODULE_ALIAS("platform:mpc83xx_spi");
-static struct platform_driver mpc83xx_spi_driver = {
-	.probe = plat_mpc83xx_spi_probe,
-	.remove = __exit_p(plat_mpc83xx_spi_remove),
+MODULE_ALIAS("platform:mpc8xxx_spi");
+static struct platform_driver mpc8xxx_spi_driver = {
+	.probe = plat_mpc8xxx_spi_probe,
+	.remove = __exit_p(plat_mpc8xxx_spi_remove),
 	.driver = {
-		.name = "mpc83xx_spi",
+		.name = "mpc8xxx_spi",
 		.owner = THIS_MODULE,
 	},
 };
@@ -932,35 +911,35 @@ static bool legacy_driver_failed;
 
 static void __init legacy_driver_register(void)
 {
-	legacy_driver_failed = platform_driver_register(&mpc83xx_spi_driver);
+	legacy_driver_failed = platform_driver_register(&mpc8xxx_spi_driver);
 }
 
 static void __exit legacy_driver_unregister(void)
 {
 	if (legacy_driver_failed)
 		return;
-	platform_driver_unregister(&mpc83xx_spi_driver);
+	platform_driver_unregister(&mpc8xxx_spi_driver);
 }
 #else
 static void __init legacy_driver_register(void) {}
 static void __exit legacy_driver_unregister(void) {}
 #endif /* CONFIG_MPC832x_RDB */
 
-static int __init mpc83xx_spi_init(void)
+static int __init mpc8xxx_spi_init(void)
 {
 	legacy_driver_register();
-	return of_register_platform_driver(&of_mpc83xx_spi_driver);
+	return of_register_platform_driver(&of_mpc8xxx_spi_driver);
 }
 
-static void __exit mpc83xx_spi_exit(void)
+static void __exit mpc8xxx_spi_exit(void)
 {
-	of_unregister_platform_driver(&of_mpc83xx_spi_driver);
+	of_unregister_platform_driver(&of_mpc8xxx_spi_driver);
 	legacy_driver_unregister();
 }
 
-module_init(mpc83xx_spi_init);
-module_exit(mpc83xx_spi_exit);
+module_init(mpc8xxx_spi_init);
+module_exit(mpc8xxx_spi_exit);
 
 MODULE_AUTHOR("Kumar Gala");
-MODULE_DESCRIPTION("Simple MPC83xx SPI Driver");
+MODULE_DESCRIPTION("Simple MPC8xxx SPI Driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
index b3ebc1d0f85..e0d44af4745 100644
--- a/drivers/spi/spi_s3c24xx.c
+++ b/drivers/spi/spi_s3c24xx.c
@@ -146,32 +146,16 @@ static int s3c24xx_spi_setupxfer(struct spi_device *spi,
 	return 0;
 }
 
-/* the spi->mode bits understood by this driver: */
-#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH)
-
 static int s3c24xx_spi_setup(struct spi_device *spi)
 {
 	int ret;
 
-	if (!spi->bits_per_word)
-		spi->bits_per_word = 8;
-
-	if (spi->mode & ~MODEBITS) {
-		dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n",
-			spi->mode & ~MODEBITS);
-		return -EINVAL;
-	}
-
 	ret = s3c24xx_spi_setupxfer(spi, NULL);
 	if (ret < 0) {
 		dev_err(&spi->dev, "setupxfer returned %d\n", ret);
 		return ret;
 	}
 
-	dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n",
-		__func__, spi->mode, spi->bits_per_word,
-		spi->max_speed_hz);
-
 	return 0;
 }
 
@@ -290,6 +274,9 @@ static int __init s3c24xx_spi_probe(struct platform_device *pdev)
 
 	/* setup the master state. */
 
+	/* the spi->mode bits understood by this driver: */
+	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+
 	master->num_chipselect = hw->pdata->num_cs;
 	master->bus_num = pdata->bus_num;
 
diff --git a/drivers/spi/spi_txx9.c b/drivers/spi/spi_txx9.c
index 29cbb065618..96057de133a 100644
--- a/drivers/spi/spi_txx9.c
+++ b/drivers/spi/spi_txx9.c
@@ -110,23 +110,17 @@ static void txx9spi_cs_func(struct spi_device *spi, struct txx9spi *c,
 	ndelay(cs_delay);	/* CS Setup Time / CS Recovery Time */
 }
 
-/* the spi->mode bits understood by this driver: */
-#define MODEBITS	(SPI_CS_HIGH|SPI_CPOL|SPI_CPHA)
-
 static int txx9spi_setup(struct spi_device *spi)
 {
 	struct txx9spi *c = spi_master_get_devdata(spi->master);
 	u8 bits_per_word;
 
-	if (spi->mode & ~MODEBITS)
-		return -EINVAL;
-
 	if (!spi->max_speed_hz
 			|| spi->max_speed_hz > c->max_speed_hz
 			|| spi->max_speed_hz < c->min_speed_hz)
 		return -EINVAL;
 
-	bits_per_word = spi->bits_per_word ? : 8;
+	bits_per_word = spi->bits_per_word;
 	if (bits_per_word != 8 && bits_per_word != 16)
 		return -EINVAL;
 
@@ -414,6 +408,9 @@ static int __init txx9spi_probe(struct platform_device *dev)
 		 (unsigned long long)res->start, irq,
 		 (c->baseclk + 500000) / 1000000);
 
+	/* the spi->mode bits understood by this driver: */
+	master->mode_bits = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA;
+
 	master->bus_num = dev->id;
 	master->setup = txx9spi_setup;
 	master->transfer = txx9spi_transfer;
diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c
index 494d3f756e2..46b8c5c2f45 100644
--- a/drivers/spi/xilinx_spi.c
+++ b/drivers/spi/xilinx_spi.c
@@ -158,9 +158,6 @@ static int xilinx_spi_setup_transfer(struct spi_device *spi,
 	return 0;
 }
 
-/* the spi->mode bits understood by this driver: */
-#define MODEBITS (SPI_CPOL | SPI_CPHA)
-
 static int xilinx_spi_setup(struct spi_device *spi)
 {
 	struct spi_bitbang *bitbang;
@@ -170,22 +167,10 @@ static int xilinx_spi_setup(struct spi_device *spi)
 	xspi = spi_master_get_devdata(spi->master);
 	bitbang = &xspi->bitbang;
 
-	if (!spi->bits_per_word)
-		spi->bits_per_word = 8;
-
-	if (spi->mode & ~MODEBITS) {
-		dev_err(&spi->dev, "%s, unsupported mode bits %x\n",
-			__func__, spi->mode & ~MODEBITS);
-		return -EINVAL;
-	}
-
 	retval = xilinx_spi_setup_transfer(spi, NULL);
 	if (retval < 0)
 		return retval;
 
-	dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
-		__func__, spi->mode & MODEBITS, spi->bits_per_word, 0);
-
 	return 0;
 }
 
@@ -333,6 +318,9 @@ static int __init xilinx_spi_of_probe(struct of_device *ofdev,
 		goto put_master;
 	}
 
+	/* the spi->mode bits understood by this driver: */
+	master->mode_bits = SPI_CPOL | SPI_CPHA;
+
 	xspi = spi_master_get_devdata(master);
 	xspi->bitbang.master = spi_master_get(master);
 	xspi->bitbang.chipselect = xilinx_spi_chipselect;
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 925657889f0..348bf61a8fe 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -85,6 +85,8 @@ source "drivers/staging/altpciechdma/Kconfig"
 
 source "drivers/staging/rtl8187se/Kconfig"
 
+source "drivers/staging/rtl8192su/Kconfig"
+
 source "drivers/staging/rspiusb/Kconfig"
 
 source "drivers/staging/mimio/Kconfig"
@@ -113,11 +115,19 @@ source "drivers/staging/heci/Kconfig"
 
 source "drivers/staging/line6/Kconfig"
 
-source "drivers/staging/serqt_usb/Kconfig"
-
 source "drivers/gpu/drm/radeon/Kconfig"
 
 source "drivers/staging/octeon/Kconfig"
 
+source "drivers/staging/serqt_usb2/Kconfig"
+
+source "drivers/staging/vt6655/Kconfig"
+
+source "drivers/staging/cpc-usb/Kconfig"
+
+source "drivers/staging/pata_rdc/Kconfig"
+
+source "drivers/staging/udlfb/Kconfig"
+
 endif # !STAGING_EXCLUDE_BUILD
 endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 6da9c74c184..8d61d7b4deb 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_ASUS_OLED)		+= asus_oled/
 obj-$(CONFIG_PANEL)		+= panel/
 obj-$(CONFIG_ALTERA_PCIE_CHDMA)	+= altpciechdma/
 obj-$(CONFIG_RTL8187SE)		+= rtl8187se/
+obj-$(CONFIG_RTL8192SU)		+= rtl8192su/
 obj-$(CONFIG_USB_RSPI)		+= rspiusb/
 obj-$(CONFIG_INPUT_MIMIO)	+= mimio/
 obj-$(CONFIG_TRANZPORT)		+= frontier/
@@ -39,5 +40,9 @@ obj-$(CONFIG_IDE_PHISON)	+= phison/
 obj-$(CONFIG_PLAN9AUTH)		+= p9auth/
 obj-$(CONFIG_HECI)		+= heci/
 obj-$(CONFIG_LINE6_USB)		+= line6/
-obj-$(CONFIG_USB_SERIAL_QUATECH_ESU100)	+= serqt_usb/
+obj-$(CONFIG_USB_SERIAL_QUATECH2)	+= serqt_usb2/
 obj-$(CONFIG_OCTEON_ETHERNET)	+= octeon/
+obj-$(CONFIG_VT6655)		+= vt6655/
+obj-$(CONFIG_USB_CPC)		+= cpc-usb/
+obj-$(CONFIG_RDC_17F3101X)	+= pata_rdc/
+obj-$(CONFIG_FB_UDL)		+= udlfb/
diff --git a/drivers/staging/agnx/debug.h b/drivers/staging/agnx/debug.h
index 761d99c2d3f..7947f327a21 100644
--- a/drivers/staging/agnx/debug.h
+++ b/drivers/staging/agnx/debug.h
@@ -312,7 +312,6 @@ static inline void dump_ieee80211_hdr(struct ieee80211_hdr *hdr, char *tag)
 {
 	u16 fctl;
 	int hdrlen;
-	DECLARE_MAC_BUF(mac);
 
 	fctl = le16_to_cpu(hdr->frame_control);
 	switch (fctl & IEEE80211_FCTL_FTYPE) {
@@ -375,13 +374,13 @@ static inline void dump_ieee80211_hdr(struct ieee80211_hdr *hdr, char *tag)
 		printk("FC=0x%04x DUR=0x%04x",
 		       fctl, le16_to_cpu(hdr->duration_id));
 	if (hdrlen >= 10)
-		printk(" A1=%s", print_mac(mac, hdr->addr1));
+		printk(" A1=%pM", hdr->addr1);
 	if (hdrlen >= 16)
-		printk(" A2=%s", print_mac(mac, hdr->addr2));
+		printk(" A2=%pM", hdr->addr2);
 	if (hdrlen >= 24)
-		printk(" A3=%s", print_mac(mac, hdr->addr3));
+		printk(" A3=%pM", hdr->addr3);
 	if (hdrlen >= 30)
-		printk(" A4=%s", print_mac(mac, hdr->addr4));
+		printk(" A4=%pM", hdr->addr4);
 	printk("\n");
 }
 
diff --git a/drivers/staging/agnx/pci.c b/drivers/staging/agnx/pci.c
index 43b3fe35261..1fe98706525 100644
--- a/drivers/staging/agnx/pci.c
+++ b/drivers/staging/agnx/pci.c
@@ -58,15 +58,17 @@ static inline void agnx_interrupt_ack(struct agnx_priv *priv, u32 *reason)
 			*reason |= AGNX_STAT_TXM;
 		}
 	}
-/*	if (*reason & AGNX_STAT_X) {
+#if 0
+	if (*reason & AGNX_STAT_X) {
 		reg = ioread32(ctl + AGNX_INT_STAT);
 		iowrite32(reg, ctl + AGNX_INT_STAT);
-		/* FIXME reinit interrupt mask *\/
+		/* FIXME reinit interrupt mask */
 		reg = 0xc390bf9 & ~IRQ_TX_BEACON;
 		reg &= ~IRQ_TX_DISABLE;
 		iowrite32(reg, ctl + AGNX_INT_MASK);
 		iowrite32(0x800, ctl + AGNX_CIR_BLKCTL);
-	} */
+	}
+#endif
 } /* agnx_interrupt_ack */
 
 static irqreturn_t agnx_interrupt_handler(int irq, void *dev_id)
@@ -150,8 +152,7 @@ static int agnx_get_mac_address(struct agnx_priv *priv)
 	*((u32 *)(priv->mac_addr + 2)) = cpu_to_le32(reg);
 
 	if (!is_valid_ether_addr(priv->mac_addr)) {
-		DECLARE_MAC_BUF(mbuf);
-		printk(KERN_WARNING PFX "read mac %s\n", print_mac(mbuf, priv->mac_addr));
+		printk(KERN_WARNING PFX "read mac %pM\n", priv->mac_addr);
 		printk(KERN_WARNING PFX "Invalid hwaddr! Using random hwaddr\n");
 		random_ether_addr(priv->mac_addr);
 	}
@@ -220,7 +221,7 @@ static void agnx_periodic_work_handler(struct work_struct *work)
 	/* TODO Recalibrate*/
 /*	calibrate_oscillator(priv); */
 /*	antenna_calibrate(priv); */
-/*	agnx_send_packet(priv, 997); /
+/*	agnx_send_packet(priv, 997); */
 	/* FIXME */
 /* 	if (debug == 3) */
 /*                 delay = msecs_to_jiffies(AGNX_PERIODIC_DELAY); */
@@ -455,47 +456,35 @@ static int __devinit agnx_pci_probe(struct pci_dev *pdev,
 {
 	struct ieee80211_hw *dev;
 	struct agnx_priv *priv;
-	u32 mem_addr0, mem_len0;
-	u32 mem_addr1, mem_len1;
 	int err;
-	DECLARE_MAC_BUF(mac);
 
 	err = pci_enable_device(pdev);
 	if (err) {
-		printk(KERN_ERR PFX "Can't enable new PCI device\n");
+		dev_err(&pdev->dev, "can't enable pci device\n");
 		return err;
 	}
 
-	/* get pci resource */
-	mem_addr0 = pci_resource_start(pdev, 0);
-	mem_len0 = pci_resource_len(pdev, 0);
-	mem_addr1 = pci_resource_start(pdev, 1);
-	mem_len1 = pci_resource_len(pdev, 1);
-	printk(KERN_DEBUG PFX "Memaddr0 is %x, length is %x\n", mem_addr0, mem_len0);
-	printk(KERN_DEBUG PFX "Memaddr1 is %x, length is %x\n", mem_addr1, mem_len1);
-
 	err = pci_request_regions(pdev, "agnx-pci");
 	if (err) {
-		printk(KERN_ERR PFX "Can't obtain PCI resource\n");
+		dev_err(&pdev->dev, "can't reserve PCI resources\n");
 		return err;
 	}
 
 	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) ||
 	    pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
-		printk(KERN_ERR PFX "No suitable DMA available\n");
+		dev_err(&pdev->dev, "no suitable DMA available\n");
+		err = -EIO;
 		goto err_free_reg;
 	}
 
 	pci_set_master(pdev);
-	printk(KERN_DEBUG PFX "pdev->irq is %d\n", pdev->irq);
 
 	dev = ieee80211_alloc_hw(sizeof(*priv), &agnx_ops);
 	if (!dev) {
-		printk(KERN_ERR PFX "ieee80211 alloc failed\n");
+		dev_err(&pdev->dev, "ieee80211 alloc failed\n");
 		err = -ENOMEM;
 		goto err_free_reg;
 	}
-	/* init priv  */
 	priv = dev->priv;
 	memset(priv, 0, sizeof(*priv));
 	priv->mode = NL80211_IFTYPE_MONITOR;
@@ -504,17 +493,17 @@ static int __devinit agnx_pci_probe(struct pci_dev *pdev,
 	spin_lock_init(&priv->lock);
 	priv->init_status = AGNX_UNINIT;
 
-	/* Map mem #1 and #2 */
-	priv->ctl = pci_iomap(pdev, 0, mem_len0);
-/*	printk(KERN_DEBUG PFX"MEM1 mapped address is 0x%p\n", priv->ctl); */
+	priv->ctl = pci_iomap(pdev, 0, 0);
+/*	dev_dbg(&pdev->dev, "MEM1 mapped address is 0x%p\n", priv->ctl); */
 	if (!priv->ctl) {
-		printk(KERN_ERR PFX "Can't map device memory\n");
+		dev_err(&pdev->dev, "can't map device memory\n");
+		err = -ENOMEM;
 		goto err_free_dev;
 	}
-	priv->data = pci_iomap(pdev, 1, mem_len1);
-	printk(KERN_DEBUG PFX "MEM2 mapped address is 0x%p\n", priv->data);
+	priv->data = pci_iomap(pdev, 1, 0);
 	if (!priv->data) {
-		printk(KERN_ERR PFX "Can't map device memory\n");
+		dev_err(&pdev->dev, "can't map device memory\n");
+		err = -ENOMEM;
 		goto err_iounmap2;
 	}
 
@@ -555,15 +544,15 @@ static int __devinit agnx_pci_probe(struct pci_dev *pdev,
 
 	err = ieee80211_register_hw(dev);
 	if (err) {
-		printk(KERN_ERR PFX "Can't register hardware\n");
+		dev_err(&pdev->dev, "can't register hardware\n");
 		goto err_iounmap;
 	}
 
 	agnx_hw_reset(priv);
 
-
-	printk(PFX "%s: hwaddr %s, Rev 0x%02x\n", wiphy_name(dev->wiphy),
-	       print_mac(mac, dev->wiphy->perm_addr), priv->revid);
+	dev_info(&pdev->dev, "%s: hwaddr %pM, Rev 0x%02x\n",
+		wiphy_name(dev->wiphy),
+		dev->wiphy->perm_addr, priv->revid);
 	return 0;
 
  err_iounmap:
diff --git a/drivers/staging/agnx/phy.c b/drivers/staging/agnx/phy.c
index 2be63312b72..ec1ca86fa0c 100644
--- a/drivers/staging/agnx/phy.c
+++ b/drivers/staging/agnx/phy.c
@@ -118,7 +118,7 @@ static void mac_address_set(struct agnx_priv *priv)
 	iowrite32(reg, ctl + AGNX_RXM_MACLO);
 }
 
-static void receiver_bssid_set(struct agnx_priv *priv, u8 *bssid)
+static void receiver_bssid_set(struct agnx_priv *priv, const u8 *bssid)
 {
 	void __iomem *ctl = priv->ctl;
 	u32 reg;
@@ -954,7 +954,7 @@ int agnx_set_ssid(struct agnx_priv *priv, u8 *ssid, size_t ssid_len)
 	return 0;
 }
 
-void agnx_set_bssid(struct agnx_priv *priv, u8 *bssid)
+void agnx_set_bssid(struct agnx_priv *priv, const u8 *bssid)
 {
 	receiver_bssid_set(priv, bssid);
 }
diff --git a/drivers/staging/agnx/phy.h b/drivers/staging/agnx/phy.h
index 55e1e222179..a955f05361e 100644
--- a/drivers/staging/agnx/phy.h
+++ b/drivers/staging/agnx/phy.h
@@ -401,7 +401,7 @@ u8 read_from_eeprom(struct agnx_priv *priv, u16 address);
 void agnx_hw_init(struct agnx_priv *priv);
 int agnx_hw_reset(struct agnx_priv *priv);
 int agnx_set_ssid(struct agnx_priv *priv, u8 *ssid, size_t ssid_len);
-void agnx_set_bssid(struct agnx_priv *priv, u8 *bssid);
+void agnx_set_bssid(struct agnx_priv *priv, const u8 *bssid);
 void enable_power_saving(struct agnx_priv *priv);
 void disable_power_saving(struct agnx_priv *priv);
 void calibrate_antenna_period(unsigned long data);
diff --git a/drivers/staging/agnx/sta.c b/drivers/staging/agnx/sta.c
index 5b2d54a587c..3e7db5e2811 100644
--- a/drivers/staging/agnx/sta.c
+++ b/drivers/staging/agnx/sta.c
@@ -22,7 +22,7 @@ void hash_read(struct agnx_priv *priv, u32 reghi, u32 reglo, u8 sta_id)
 	printk(PFX "RX hash cmd are : %.8x%.8x\n", reghi, reglo);
 }
 
-void hash_write(struct agnx_priv *priv, u8 *mac_addr, u8 sta_id)
+void hash_write(struct agnx_priv *priv, const u8 *mac_addr, u8 sta_id)
 {
 	void __iomem *ctl = priv->ctl;
 	u32 reghi, reglo;
diff --git a/drivers/staging/agnx/sta.h b/drivers/staging/agnx/sta.h
index 94e2cf1f973..fd504e3f387 100644
--- a/drivers/staging/agnx/sta.h
+++ b/drivers/staging/agnx/sta.h
@@ -201,7 +201,7 @@ struct agnx_beacon_hdr {
 	/* 802.11(abg) beacon */
 } __attribute__((__packed__));
 
-void hash_write(struct agnx_priv *priv, u8 *mac_addr, u8 sta_id);
+void hash_write(struct agnx_priv *priv, const u8 *mac_addr, u8 sta_id);
 void hash_dump(struct agnx_priv *priv, u8 sta_id);
 void hash_read(struct agnx_priv *priv, u32 reghi, u32 reglo, u8 sta_id);
 void hash_delete(struct agnx_priv *priv, u32 reghi, u32 reglo, u8 sta_id);
diff --git a/drivers/staging/altpciechdma/altpciechdma.c b/drivers/staging/altpciechdma/altpciechdma.c
index 5869e1484a9..3724b8ad487 100644
--- a/drivers/staging/altpciechdma/altpciechdma.c
+++ b/drivers/staging/altpciechdma/altpciechdma.c
@@ -399,6 +399,7 @@ static inline void ape_chdma_desc_set(struct ape_chdma_desc *desc, dma_addr_t ad
 	desc->rc_addr_l = cpu_to_le32(pci_dma_l(addr));
 }
 
+#if ALTPCIECHDMA_CDEV
 /*
  * ape_sg_to_chdma_table() - Create a device descriptor table from a scatterlist.
  *
@@ -456,6 +457,7 @@ static int ape_sg_to_chdma_table(struct scatterlist *sgl, int nents, int first,
 	j++;
 	return j;
 }
+#endif
 
 /* compare buffers */
 static inline int compare(u32 *p, u32 *q, int len)
@@ -540,8 +542,8 @@ static int __devinit dma_test(struct ape_dev *ape, struct pci_dev *dev)
 		printk(KERN_DEBUG "Could not allocate coherent DMA buffer.\n");
 		goto fail;
 	}
-	printk(KERN_DEBUG "Allocated cache-coherent DMA buffer (virtual address = 0x%016llx, bus address = 0x%016llx).\n",
-		(u64)buffer_virt, (u64)buffer_bus);
+	printk(KERN_DEBUG "Allocated cache-coherent DMA buffer (virtual address = %p, bus address = 0x%016llx).\n",
+	       buffer_virt, (u64)buffer_bus);
 
 	/* fill first half of buffer with its virtual address as data */
 	for (i = 0; i < 4 * PAGE_SIZE; i += 4)
@@ -783,7 +785,7 @@ static int __devinit probe(struct pci_dev *dev, const struct pci_device_id *id)
 		goto err_ape;
 	}
 	ape->pci_dev = dev;
-	dev->dev.driver_data = (void *)ape;
+	dev_set_drvdata(&dev->dev, ape);
 	printk(KERN_DEBUG "probe() ape = 0x%p\n", ape);
 
 	printk(KERN_DEBUG "sizeof(struct ape_chdma_table) = %d.\n",
@@ -801,8 +803,8 @@ static int __devinit probe(struct pci_dev *dev, const struct pci_device_id *id)
 		goto err_table;
 	}
 
-	printk(KERN_DEBUG "table_virt = 0x%16llx, table_bus = 0x%16llx.\n",
-		(u64)ape->table_virt, (u64)ape->table_bus);
+	printk(KERN_DEBUG "table_virt = %p, table_bus = 0x%16llx.\n",
+		ape->table_virt, (u64)ape->table_bus);
 
 	/* enable device */
 	rc = pci_enable_device(dev);
@@ -913,9 +915,11 @@ static int __devinit probe(struct pci_dev *dev, const struct pci_device_id *id)
 	rc = 0;
 	printk(KERN_DEBUG "probe() successful.\n");
 	goto end;
+#if ALTPCIECHDMA_CDEV
 err_cdev:
 	/* unmap the BARs */
 	unmap_bars(ape, dev);
+#endif
 err_map:
 	/* free allocated irq */
 	if (ape->irq_line >= 0)
@@ -930,7 +934,7 @@ err_irq:
 		pci_release_regions(dev);
 err_mask:
 err_regions:
-err_rev:
+/*err_rev:*/
 /* clean up everything before device enable() */
 err_enable:
 	if (ape->table_virt)
@@ -946,19 +950,11 @@ end:
 
 static void __devexit remove(struct pci_dev *dev)
 {
-	struct ape_dev *ape;
+	struct ape_dev *ape = dev_get_drvdata(&dev->dev);
+
 	printk(KERN_DEBUG "remove(0x%p)\n", dev);
-	if ((dev == 0) || (dev->dev.driver_data == 0)) {
-		printk(KERN_DEBUG "remove(dev = 0x%p) dev->dev.driver_data = 0x%p\n",
-			dev, (dev? dev->dev.driver_data: NULL));
-		return;
-	}
-	ape = (struct ape_dev *)dev->dev.driver_data;
-	printk(KERN_DEBUG "remove(dev = 0x%p) where dev->dev.driver_data = 0x%p\n", dev, ape);
-	if (ape->pci_dev != dev) {
-		printk(KERN_DEBUG "dev->dev.driver_data->pci_dev (0x%08lx) != dev (0x%08lx)\n",
-		(unsigned long)ape->pci_dev, (unsigned long)dev);
-	}
+	printk(KERN_DEBUG "remove(dev = 0x%p) where ape = 0x%p\n", dev, ape);
+
 	/* remove character device */
 #if ALTPCIECHDMA_CDEV
 	sg_exit(ape);
@@ -1151,7 +1147,7 @@ static struct pci_driver pci_driver = {
 	.name = DRV_NAME,
 	.id_table = ids,
 	.probe = probe,
-	.remove = remove,
+	.remove = __devexit_p(remove),
 	/* resume, suspend are optional */
 };
 
diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig
index 604bd1e0d54..24719499237 100644
--- a/drivers/staging/android/Kconfig
+++ b/drivers/staging/android/Kconfig
@@ -6,6 +6,8 @@ config ANDROID
 	---help---
 	  Enable support for various drivers needed on the Android platform
 
+if ANDROID
+
 config ANDROID_BINDER_IPC
 	bool "Android Binder IPC Driver"
 	default n
@@ -73,9 +75,13 @@ config ANDROID_RAM_CONSOLE_EARLY_SIZE
 	default 0
 	depends on ANDROID_RAM_CONSOLE_EARLY_INIT
 
+config ANDROID_TIMED_OUTPUT
+	bool "Timed output class driver"
+	default y
+
 config ANDROID_TIMED_GPIO
 	tristate "Android timed gpio driver"
-	depends on GENERIC_GPIO
+	depends on GENERIC_GPIO && ANDROID_TIMED_OUTPUT
 	default n
 
 config ANDROID_LOW_MEMORY_KILLER
@@ -84,4 +90,6 @@ config ANDROID_LOW_MEMORY_KILLER
 	---help---
 	  Register processes to be killed when memory is low
 
+endif # if ANDROID
+
 endmenu
diff --git a/drivers/staging/android/Makefile b/drivers/staging/android/Makefile
index 95209d6273a..8e057e626d1 100644
--- a/drivers/staging/android/Makefile
+++ b/drivers/staging/android/Makefile
@@ -1,5 +1,6 @@
 obj-$(CONFIG_ANDROID_BINDER_IPC)	+= binder.o
 obj-$(CONFIG_ANDROID_LOGGER)		+= logger.o
 obj-$(CONFIG_ANDROID_RAM_CONSOLE)	+= ram_console.o
+obj-$(CONFIG_ANDROID_TIMED_OUTPUT)	+= timed_output.o
 obj-$(CONFIG_ANDROID_TIMED_GPIO)	+= timed_gpio.o
 obj-$(CONFIG_ANDROID_LOW_MEMORY_KILLER)	+= lowmemorykiller.o
diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c
index 299d29d1dad..17d89a8124a 100644
--- a/drivers/staging/android/binder.c
+++ b/drivers/staging/android/binder.c
@@ -44,8 +44,8 @@ static struct hlist_head binder_dead_nodes;
 static HLIST_HEAD(binder_deferred_list);
 static DEFINE_MUTEX(binder_deferred_lock);
 
-static int binder_read_proc_proc(
-	char *page, char **start, off_t off, int count, int *eof, void *data);
+static int binder_read_proc_proc(char *page, char **start, off_t off,
+				 int count, int *eof, void *data);
 
 /* This is only defined in include/asm-arm/sizes.h */
 #ifndef SZ_1K
@@ -81,12 +81,15 @@ enum {
 static uint32_t binder_debug_mask = BINDER_DEBUG_USER_ERROR |
 	BINDER_DEBUG_FAILED_TRANSACTION | BINDER_DEBUG_DEAD_TRANSACTION;
 module_param_named(debug_mask, binder_debug_mask, uint, S_IWUSR | S_IRUGO);
+
 static int binder_debug_no_lock;
 module_param_named(proc_no_lock, binder_debug_no_lock, bool, S_IWUSR | S_IRUGO);
+
 static DECLARE_WAIT_QUEUE_HEAD(binder_user_error_wait);
 static int binder_stop_on_user_error;
-static int binder_set_stop_on_user_error(
-	const char *val, struct kernel_param *kp)
+
+static int binder_set_stop_on_user_error(const char *val,
+					 struct kernel_param *kp)
 {
 	int ret;
 	ret = param_set_int(val, kp);
@@ -185,13 +188,13 @@ struct binder_node {
 	int local_strong_refs;
 	void __user *ptr;
 	void __user *cookie;
-	unsigned has_strong_ref : 1;
-	unsigned pending_strong_ref : 1;
-	unsigned has_weak_ref : 1;
-	unsigned pending_weak_ref : 1;
-	unsigned has_async_transaction : 1;
-	unsigned accept_fds : 1;
-	int min_priority : 8;
+	unsigned has_strong_ref:1;
+	unsigned pending_strong_ref:1;
+	unsigned has_weak_ref:1;
+	unsigned pending_weak_ref:1;
+	unsigned has_async_transaction:1;
+	unsigned accept_fds:1;
+	unsigned min_priority:8;
 	struct list_head async_todo;
 };
 
@@ -221,10 +224,10 @@ struct binder_buffer {
 	struct list_head entry; /* free and allocated entries by addesss */
 	struct rb_node rb_node; /* free entry by size or allocated entry */
 				/* by address */
-	unsigned free : 1;
-	unsigned allow_user_free : 1;
-	unsigned async_transaction : 1;
-	unsigned debug_id : 29;
+	unsigned free:1;
+	unsigned allow_user_free:1;
+	unsigned async_transaction:1;
+	unsigned debug_id:29;
 
 	struct binder_transaction *transaction;
 
@@ -306,8 +309,8 @@ struct binder_transaction {
 	struct binder_proc *to_proc;
 	struct binder_thread *to_thread;
 	struct binder_transaction *to_parent;
-	unsigned need_reply : 1;
-	/*unsigned is_dead : 1;*/ /* not used at the moment */
+	unsigned need_reply:1;
+	/* unsigned is_dead:1; */	/* not used at the moment */
 
 	struct binder_buffer *buffer;
 	unsigned int	code;
@@ -474,8 +477,8 @@ static void binder_set_nice(long nice)
 	binder_user_error("binder: %d RLIMIT_NICE not set\n", current->pid);
 }
 
-static size_t binder_buffer_size(
-	struct binder_proc *proc, struct binder_buffer *buffer)
+static size_t binder_buffer_size(struct binder_proc *proc,
+				 struct binder_buffer *buffer)
 {
 	if (list_is_last(&buffer->entry, &proc->buffers))
 		return proc->buffer + proc->buffer_size - (void *)buffer->data;
@@ -484,8 +487,8 @@ static size_t binder_buffer_size(
 			struct binder_buffer, entry) - (size_t)buffer->data;
 }
 
-static void binder_insert_free_buffer(
-	struct binder_proc *proc, struct binder_buffer *new_buffer)
+static void binder_insert_free_buffer(struct binder_proc *proc,
+				      struct binder_buffer *new_buffer)
 {
 	struct rb_node **p = &proc->free_buffers.rb_node;
 	struct rb_node *parent = NULL;
@@ -517,8 +520,8 @@ static void binder_insert_free_buffer(
 	rb_insert_color(&new_buffer->rb_node, &proc->free_buffers);
 }
 
-static void binder_insert_allocated_buffer(
-	struct binder_proc *proc, struct binder_buffer *new_buffer)
+static void binder_insert_allocated_buffer(struct binder_proc *proc,
+					   struct binder_buffer *new_buffer)
 {
 	struct rb_node **p = &proc->allocated_buffers.rb_node;
 	struct rb_node *parent = NULL;
@@ -542,8 +545,8 @@ static void binder_insert_allocated_buffer(
 	rb_insert_color(&new_buffer->rb_node, &proc->allocated_buffers);
 }
 
-static struct binder_buffer *binder_buffer_lookup(
-	struct binder_proc *proc, void __user *user_ptr)
+static struct binder_buffer *binder_buffer_lookup(struct binder_proc *proc,
+						  void __user *user_ptr)
 {
 	struct rb_node *n = proc->allocated_buffers.rb_node;
 	struct binder_buffer *buffer;
@@ -567,7 +570,8 @@ static struct binder_buffer *binder_buffer_lookup(
 }
 
 static int binder_update_page_range(struct binder_proc *proc, int allocate,
-	void *start, void *end, struct vm_area_struct *vma)
+				    void *start, void *end,
+				    struct vm_area_struct *vma)
 {
 	void *page_addr;
 	unsigned long user_page_addr;
@@ -664,7 +668,8 @@ err_no_vma:
 }
 
 static struct binder_buffer *binder_alloc_buf(struct binder_proc *proc,
-	size_t data_size, size_t offsets_size, int is_async)
+					      size_t data_size,
+					      size_t offsets_size, int is_async)
 {
 	struct rb_node *n = proc->free_buffers.rb_node;
 	struct binder_buffer *buffer;
@@ -692,8 +697,9 @@ static struct binder_buffer *binder_alloc_buf(struct binder_proc *proc,
 	if (is_async &&
 	    proc->free_async_space < size + sizeof(struct binder_buffer)) {
 		if (binder_debug_mask & BINDER_DEBUG_BUFFER_ALLOC)
-			printk(KERN_ERR "binder: %d: binder_alloc_buf size %zd f"
-			       "ailed, no async space left\n", proc->pid, size);
+			printk(KERN_ERR
+			       "binder: %d: binder_alloc_buf size %zd failed, "
+			       "no async space left\n", proc->pid, size);
 		return NULL;
 	}
 
@@ -777,8 +783,8 @@ static void *buffer_end_page(struct binder_buffer *buffer)
 	return (void *)(((uintptr_t)(buffer + 1) - 1) & PAGE_MASK);
 }
 
-static void binder_delete_free_buffer(
-	struct binder_proc *proc, struct binder_buffer *buffer)
+static void binder_delete_free_buffer(struct binder_proc *proc,
+				      struct binder_buffer *buffer)
 {
 	struct binder_buffer *prev, *next = NULL;
 	int free_page_end = 1;
@@ -824,8 +830,8 @@ static void binder_delete_free_buffer(
 	}
 }
 
-static void binder_free_buf(
-	struct binder_proc *proc, struct binder_buffer *buffer)
+static void binder_free_buf(struct binder_proc *proc,
+			    struct binder_buffer *buffer)
 {
 	size_t size, buffer_size;
 
@@ -877,8 +883,8 @@ static void binder_free_buf(
 	binder_insert_free_buffer(proc, buffer);
 }
 
-static struct binder_node *
-binder_get_node(struct binder_proc *proc, void __user *ptr)
+static struct binder_node *binder_get_node(struct binder_proc *proc,
+					   void __user *ptr)
 {
 	struct rb_node *n = proc->nodes.rb_node;
 	struct binder_node *node;
@@ -896,8 +902,9 @@ binder_get_node(struct binder_proc *proc, void __user *ptr)
 	return NULL;
 }
 
-static struct binder_node *
-binder_new_node(struct binder_proc *proc, void __user *ptr, void __user *cookie)
+static struct binder_node *binder_new_node(struct binder_proc *proc,
+					   void __user *ptr,
+					   void __user *cookie)
 {
 	struct rb_node **p = &proc->nodes.rb_node;
 	struct rb_node *parent = NULL;
@@ -935,9 +942,8 @@ binder_new_node(struct binder_proc *proc, void __user *ptr, void __user *cookie)
 	return node;
 }
 
-static int
-binder_inc_node(struct binder_node *node, int strong, int internal,
-		struct list_head *target_list)
+static int binder_inc_node(struct binder_node *node, int strong, int internal,
+			   struct list_head *target_list)
 {
 	if (strong) {
 		if (internal) {
@@ -971,8 +977,7 @@ binder_inc_node(struct binder_node *node, int strong, int internal,
 	return 0;
 }
 
-static int
-binder_dec_node(struct binder_node *node, int strong, int internal)
+static int binder_dec_node(struct binder_node *node, int strong, int internal)
 {
 	if (strong) {
 		if (internal)
@@ -1014,8 +1019,8 @@ binder_dec_node(struct binder_node *node, int strong, int internal)
 }
 
 
-static struct binder_ref *
-binder_get_ref(struct binder_proc *proc, uint32_t desc)
+static struct binder_ref *binder_get_ref(struct binder_proc *proc,
+					 uint32_t desc)
 {
 	struct rb_node *n = proc->refs_by_desc.rb_node;
 	struct binder_ref *ref;
@@ -1033,8 +1038,8 @@ binder_get_ref(struct binder_proc *proc, uint32_t desc)
 	return NULL;
 }
 
-static struct binder_ref *
-binder_get_ref_for_node(struct binder_proc *proc, struct binder_node *node)
+static struct binder_ref *binder_get_ref_for_node(struct binder_proc *proc,
+						  struct binder_node *node)
 {
 	struct rb_node *n;
 	struct rb_node **p = &proc->refs_by_node.rb_node;
@@ -1099,8 +1104,7 @@ binder_get_ref_for_node(struct binder_proc *proc, struct binder_node *node)
 	return new_ref;
 }
 
-static void
-binder_delete_ref(struct binder_ref *ref)
+static void binder_delete_ref(struct binder_ref *ref)
 {
 	if (binder_debug_mask & BINDER_DEBUG_INTERNAL_REFS)
 		printk(KERN_INFO "binder: %d delete ref %d desc %d for "
@@ -1125,9 +1129,8 @@ binder_delete_ref(struct binder_ref *ref)
 	binder_stats.obj_deleted[BINDER_STAT_REF]++;
 }
 
-static int
-binder_inc_ref(
-	struct binder_ref *ref, int strong, struct list_head *target_list)
+static int binder_inc_ref(struct binder_ref *ref, int strong,
+			  struct list_head *target_list)
 {
 	int ret;
 	if (strong) {
@@ -1149,8 +1152,7 @@ binder_inc_ref(
 }
 
 
-static int
-binder_dec_ref(struct binder_ref *ref, int strong)
+static int binder_dec_ref(struct binder_ref *ref, int strong)
 {
 	if (strong) {
 		if (ref->strong == 0) {
@@ -1182,9 +1184,8 @@ binder_dec_ref(struct binder_ref *ref, int strong)
 	return 0;
 }
 
-static void
-binder_pop_transaction(
-	struct binder_thread *target_thread, struct binder_transaction *t)
+static void binder_pop_transaction(struct binder_thread *target_thread,
+				   struct binder_transaction *t)
 {
 	if (target_thread) {
 		BUG_ON(target_thread->transaction_stack != t);
@@ -1200,8 +1201,8 @@ binder_pop_transaction(
 	binder_stats.obj_deleted[BINDER_STAT_TRANSACTION]++;
 }
 
-static void
-binder_send_failed_reply(struct binder_transaction *t, uint32_t error_code)
+static void binder_send_failed_reply(struct binder_transaction *t,
+				     uint32_t error_code)
 {
 	struct binder_thread *target_thread;
 	BUG_ON(t->flags & TF_ONE_WAY);
@@ -1253,13 +1254,13 @@ binder_send_failed_reply(struct binder_transaction *t, uint32_t error_code)
 	}
 }
 
-static void
-binder_transaction_buffer_release(struct binder_proc *proc,
-			struct binder_buffer *buffer, size_t *failed_at);
+static void binder_transaction_buffer_release(struct binder_proc *proc,
+					      struct binder_buffer *buffer,
+					      size_t *failed_at);
 
-static void
-binder_transaction(struct binder_proc *proc, struct binder_thread *thread,
-	struct binder_transaction_data *tr, int reply)
+static void binder_transaction(struct binder_proc *proc,
+			       struct binder_thread *thread,
+			       struct binder_transaction_data *tr, int reply)
 {
 	struct binder_transaction *t;
 	struct binder_work *tcomplete;
@@ -1661,8 +1662,9 @@ err_no_context_mgr_node:
 		thread->return_error = return_error;
 }
 
-static void
-binder_transaction_buffer_release(struct binder_proc *proc, struct binder_buffer *buffer, size_t *failed_at)
+static void binder_transaction_buffer_release(struct binder_proc *proc,
+					      struct binder_buffer *buffer,
+					      size_t *failed_at)
 {
 	size_t *offp, *off_end;
 	int debug_id = buffer->debug_id;
@@ -1730,9 +1732,8 @@ binder_transaction_buffer_release(struct binder_proc *proc, struct binder_buffer
 	}
 }
 
-int
-binder_thread_write(struct binder_proc *proc, struct binder_thread *thread,
-		    void __user *buffer, int size, signed long *consumed)
+int binder_thread_write(struct binder_proc *proc, struct binder_thread *thread,
+			void __user *buffer, int size, signed long *consumed)
 {
 	uint32_t cmd;
 	void __user *ptr = buffer + *consumed;
@@ -2104,7 +2105,8 @@ binder_thread_write(struct binder_proc *proc, struct binder_thread *thread,
 		} break;
 
 		default:
-			printk(KERN_ERR "binder: %d:%d unknown command %d\n", proc->pid, thread->pid, cmd);
+			printk(KERN_ERR "binder: %d:%d unknown command %d\n",
+			       proc->pid, thread->pid, cmd);
 			return -EINVAL;
 		}
 		*consumed = ptr - buffer;
@@ -2112,8 +2114,8 @@ binder_thread_write(struct binder_proc *proc, struct binder_thread *thread,
 	return 0;
 }
 
-void
-binder_stat_br(struct binder_proc *proc, struct binder_thread *thread, uint32_t cmd)
+void binder_stat_br(struct binder_proc *proc, struct binder_thread *thread,
+		    uint32_t cmd)
 {
 	if (_IOC_NR(cmd) < ARRAY_SIZE(binder_stats.br)) {
 		binder_stats.br[_IOC_NR(cmd)]++;
@@ -2122,22 +2124,23 @@ binder_stat_br(struct binder_proc *proc, struct binder_thread *thread, uint32_t
 	}
 }
 
-static int
-binder_has_proc_work(struct binder_proc *proc, struct binder_thread *thread)
+static int binder_has_proc_work(struct binder_proc *proc,
+				struct binder_thread *thread)
 {
-	return !list_empty(&proc->todo) || (thread->looper & BINDER_LOOPER_STATE_NEED_RETURN);
+	return !list_empty(&proc->todo) ||
+		(thread->looper & BINDER_LOOPER_STATE_NEED_RETURN);
 }
 
-static int
-binder_has_thread_work(struct binder_thread *thread)
+static int binder_has_thread_work(struct binder_thread *thread)
 {
 	return !list_empty(&thread->todo) || thread->return_error != BR_OK ||
 		(thread->looper & BINDER_LOOPER_STATE_NEED_RETURN);
 }
 
-static int
-binder_thread_read(struct binder_proc *proc, struct binder_thread *thread,
-	void  __user *buffer, int size, signed long *consumed, int non_block)
+static int binder_thread_read(struct binder_proc *proc,
+			      struct binder_thread *thread,
+			      void  __user *buffer, int size,
+			      signed long *consumed, int non_block)
 {
 	void __user *ptr = buffer + *consumed;
 	void __user *end = buffer + size;
@@ -2152,7 +2155,8 @@ binder_thread_read(struct binder_proc *proc, struct binder_thread *thread,
 	}
 
 retry:
-	wait_for_proc_work = thread->transaction_stack == NULL && list_empty(&thread->todo);
+	wait_for_proc_work = thread->transaction_stack == NULL &&
+				list_empty(&thread->todo);
 
 	if (thread->return_error != BR_OK && ptr < end) {
 		if (thread->return_error2 != BR_OK) {
@@ -2182,7 +2186,8 @@ retry:
 				"for process work before calling BC_REGISTER_"
 				"LOOPER or BC_ENTER_LOOPER (state %x)\n",
 				proc->pid, thread->pid, thread->looper);
-			wait_event_interruptible(binder_user_error_wait, binder_stop_on_user_error < 2);
+			wait_event_interruptible(binder_user_error_wait,
+						 binder_stop_on_user_error < 2);
 		}
 		binder_set_nice(proc->default_priority);
 		if (non_block) {
@@ -2304,8 +2309,10 @@ retry:
 		case BINDER_WORK_DEAD_BINDER:
 		case BINDER_WORK_DEAD_BINDER_AND_CLEAR:
 		case BINDER_WORK_CLEAR_DEATH_NOTIFICATION: {
-			struct binder_ref_death *death = container_of(w, struct binder_ref_death, work);
+			struct binder_ref_death *death;
 			uint32_t cmd;
+
+			death = container_of(w, struct binder_ref_death, work);
 			if (w->type == BINDER_WORK_CLEAR_DEATH_NOTIFICATION)
 				cmd = BR_CLEAR_DEATH_NOTIFICATION_DONE;
 			else
@@ -2362,15 +2369,19 @@ retry:
 
 		if (t->from) {
 			struct task_struct *sender = t->from->proc->tsk;
-			tr.sender_pid = task_tgid_nr_ns(sender, current->nsproxy->pid_ns);
+			tr.sender_pid = task_tgid_nr_ns(sender,
+							current->nsproxy->pid_ns);
 		} else {
 			tr.sender_pid = 0;
 		}
 
 		tr.data_size = t->buffer->data_size;
 		tr.offsets_size = t->buffer->offsets_size;
-		tr.data.ptr.buffer = (void *)t->buffer->data + proc->user_buffer_offset;
-		tr.data.ptr.offsets = tr.data.ptr.buffer + ALIGN(t->buffer->data_size, sizeof(void *));
+		tr.data.ptr.buffer = (void *)t->buffer->data +
+					proc->user_buffer_offset;
+		tr.data.ptr.offsets = tr.data.ptr.buffer +
+					ALIGN(t->buffer->data_size,
+					    sizeof(void *));
 
 		if (put_user(cmd, (uint32_t __user *)ptr))
 			return -EFAULT;
@@ -2384,7 +2395,8 @@ retry:
 			printk(KERN_INFO "binder: %d:%d %s %d %d:%d, cmd %d"
 				"size %zd-%zd ptr %p-%p\n",
 			       proc->pid, thread->pid,
-			       (cmd == BR_TRANSACTION) ? "BR_TRANSACTION" : "BR_REPLY",
+			       (cmd == BR_TRANSACTION) ? "BR_TRANSACTION" :
+							 "BR_REPLY",
 			       t->debug_id, t->from ? t->from->proc->pid : 0,
 			       t->from ? t->from->pid : 0, cmd,
 			       t->buffer->data_size, t->buffer->offsets_size,
@@ -2430,7 +2442,9 @@ static void binder_release_work(struct list_head *list)
 		list_del_init(&w->entry);
 		switch (w->type) {
 		case BINDER_WORK_TRANSACTION: {
-			struct binder_transaction *t = container_of(w, struct binder_transaction, work);
+			struct binder_transaction *t;
+
+			t = container_of(w, struct binder_transaction, work);
 			if (t->buffer->target_node && !(t->flags & TF_ONE_WAY))
 				binder_send_failed_reply(t, BR_DEAD_REPLY);
 		} break;
@@ -2480,7 +2494,8 @@ static struct binder_thread *binder_get_thread(struct binder_proc *proc)
 	return thread;
 }
 
-static int binder_free_thread(struct binder_proc *proc, struct binder_thread *thread)
+static int binder_free_thread(struct binder_proc *proc,
+			      struct binder_thread *thread)
 {
 	struct binder_transaction *t;
 	struct binder_transaction *send_reply = NULL;
@@ -2493,8 +2508,10 @@ static int binder_free_thread(struct binder_proc *proc, struct binder_thread *th
 	while (t) {
 		active_transactions++;
 		if (binder_debug_mask & BINDER_DEBUG_DEAD_TRANSACTION)
-			printk(KERN_INFO "binder: release %d:%d transaction %d %s, still active\n",
-			       proc->pid, thread->pid, t->debug_id, (t->to_thread == thread) ? "in" : "out");
+			printk(KERN_INFO "binder: release %d:%d transaction %d "
+			       "%s, still active\n", proc->pid, thread->pid,
+			       t->debug_id,
+			       (t->to_thread == thread) ? "in" : "out");
 		if (t->to_thread == thread) {
 			t->to_proc = NULL;
 			t->to_thread = NULL;
@@ -2517,7 +2534,8 @@ static int binder_free_thread(struct binder_proc *proc, struct binder_thread *th
 	return active_transactions;
 }
 
-static unsigned int binder_poll(struct file *filp, struct poll_table_struct *wait)
+static unsigned int binder_poll(struct file *filp,
+				struct poll_table_struct *wait)
 {
 	struct binder_proc *proc = filp->private_data;
 	struct binder_thread *thread = NULL;
@@ -2778,7 +2796,8 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma)
 	proc->files = get_files_struct(current);
 	proc->vma = vma;
 
-	/*printk(KERN_INFO "binder_mmap: %d %lx-%lx maps %p\n", proc->pid, vma->vm_start, vma->vm_end, proc->buffer);*/
+	/*printk(KERN_INFO "binder_mmap: %d %lx-%lx maps %p\n",
+		 proc->pid, vma->vm_start, vma->vm_end, proc->buffer);*/
 	return 0;
 
 err_alloc_small_buf_failed:
@@ -2790,7 +2809,8 @@ err_alloc_pages_failed:
 err_get_vm_area_failed:
 err_already_mapped:
 err_bad_arg:
-	printk(KERN_ERR "binder_mmap: %d %lx-%lx %s failed %d\n", proc->pid, vma->vm_start, vma->vm_end, failure_string, ret);
+	printk(KERN_ERR "binder_mmap: %d %lx-%lx %s failed %d\n",
+	       proc->pid, vma->vm_start, vma->vm_end, failure_string, ret);
 	return ret;
 }
 
@@ -2799,7 +2819,8 @@ static int binder_open(struct inode *nodp, struct file *filp)
 	struct binder_proc *proc;
 
 	if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE)
-		printk(KERN_INFO "binder_open: %d:%d\n", current->group_leader->pid, current->pid);
+		printk(KERN_INFO "binder_open: %d:%d\n",
+		       current->group_leader->pid, current->pid);
 
 	proc = kzalloc(sizeof(*proc), GFP_KERNEL);
 	if (proc == NULL)
@@ -2821,7 +2842,9 @@ static int binder_open(struct inode *nodp, struct file *filp)
 		char strbuf[11];
 		snprintf(strbuf, sizeof(strbuf), "%u", proc->pid);
 		remove_proc_entry(strbuf, binder_proc_dir_entry_proc);
-		create_proc_read_entry(strbuf, S_IRUGO, binder_proc_dir_entry_proc, binder_read_proc_proc, proc);
+		create_proc_read_entry(strbuf, S_IRUGO,
+				       binder_proc_dir_entry_proc,
+				       binder_read_proc_proc, proc);
 	}
 
 	return 0;
@@ -2925,12 +2948,15 @@ static void binder_deferred_release(struct binder_proc *proc)
 				}
 			}
 			if (binder_debug_mask & BINDER_DEBUG_DEAD_BINDER)
-				printk(KERN_INFO "binder: node %d now dead, refs %d, death %d\n", node->debug_id, incoming_refs, death);
+				printk(KERN_INFO "binder: node %d now dead, "
+				       "refs %d, death %d\n", node->debug_id,
+				       incoming_refs, death);
 		}
 	}
 	outgoing_refs = 0;
 	while ((n = rb_first(&proc->refs_by_desc))) {
-		struct binder_ref *ref = rb_entry(n, struct binder_ref, rb_node_desc);
+		struct binder_ref *ref = rb_entry(n, struct binder_ref,
+						  rb_node_desc);
 		outgoing_refs++;
 		binder_delete_ref(ref);
 	}
@@ -2938,12 +2964,15 @@ static void binder_deferred_release(struct binder_proc *proc)
 	buffers = 0;
 
 	while ((n = rb_first(&proc->allocated_buffers))) {
-		struct binder_buffer *buffer = rb_entry(n, struct binder_buffer, rb_node);
+		struct binder_buffer *buffer = rb_entry(n, struct binder_buffer,
+							rb_node);
 		t = buffer->transaction;
 		if (t) {
 			t->buffer = NULL;
 			buffer->transaction = NULL;
-			printk(KERN_ERR "binder: release proc %d, transaction %d, not freed\n", proc->pid, t->debug_id);
+			printk(KERN_ERR "binder: release proc %d, "
+			       "transaction %d, not freed\n",
+			       proc->pid, t->debug_id);
 			/*BUG();*/
 		}
 		binder_free_buf(proc, buffer);
@@ -2957,8 +2986,13 @@ static void binder_deferred_release(struct binder_proc *proc)
 		int i;
 		for (i = 0; i < proc->buffer_size / PAGE_SIZE; i++) {
 			if (proc->pages[i]) {
-				if (binder_debug_mask & BINDER_DEBUG_BUFFER_ALLOC)
-					printk(KERN_INFO "binder_release: %d: page %d at %p not freed\n", proc->pid, i, proc->buffer + i * PAGE_SIZE);
+				if (binder_debug_mask &
+				    BINDER_DEBUG_BUFFER_ALLOC)
+					printk(KERN_INFO
+					       "binder_release: %d: "
+					       "page %d at %p not freed\n",
+					       proc->pid, i,
+					       proc->buffer + i * PAGE_SIZE);
 				__free_page(proc->pages[i]);
 				page_count++;
 			}
@@ -2970,8 +3004,12 @@ static void binder_deferred_release(struct binder_proc *proc)
 	put_task_struct(proc->tsk);
 
 	if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE)
-		printk(KERN_INFO "binder_release: %d threads %d, nodes %d (ref %d), refs %d, active transactions %d, buffers %d, pages %d\n",
-		       proc->pid, threads, nodes, incoming_refs, outgoing_refs, active_transactions, buffers, page_count);
+		printk(KERN_INFO
+		       "binder_release: %d threads %d, nodes %d (ref %d), "
+		       "refs %d, active transactions %d, buffers %d, "
+		       "pages %d\n",
+		       proc->pid, threads, nodes, incoming_refs, outgoing_refs,
+		       active_transactions, buffers, page_count);
 
 	kfree(proc);
 }
@@ -2998,9 +3036,11 @@ static void binder_deferred_func(struct work_struct *work)
 		mutex_unlock(&binder_deferred_lock);
 
 		files = NULL;
-		if (defer & BINDER_DEFERRED_PUT_FILES)
-			if ((files = proc->files))
+		if (defer & BINDER_DEFERRED_PUT_FILES) {
+			files = proc->files;
+			if (files)
 				proc->files = NULL;
+		}
 
 		if (defer & BINDER_DEFERRED_FLUSH)
 			binder_deferred_flush(proc);
@@ -3027,10 +3067,14 @@ static void binder_defer_work(struct binder_proc *proc, int defer)
 	mutex_unlock(&binder_deferred_lock);
 }
 
-static char *print_binder_transaction(char *buf, char *end, const char *prefix, struct binder_transaction *t)
+static char *print_binder_transaction(char *buf, char *end, const char *prefix,
+				      struct binder_transaction *t)
 {
-	buf += snprintf(buf, end - buf, "%s %d: %p from %d:%d to %d:%d code %x flags %x pri %ld r%d",
-			prefix, t->debug_id, t, t->from ? t->from->proc->pid : 0,
+	buf += snprintf(buf, end - buf,
+			"%s %d: %p from %d:%d to %d:%d code %x "
+			"flags %x pri %ld r%d",
+			prefix, t->debug_id, t,
+			t->from ? t->from->proc->pid : 0,
 			t->from ? t->from->pid : 0,
 			t->to_proc ? t->to_proc->pid : 0,
 			t->to_thread ? t->to_thread->pid : 0,
@@ -3053,7 +3097,8 @@ static char *print_binder_transaction(char *buf, char *end, const char *prefix,
 	return buf;
 }
 
-static char *print_binder_buffer(char *buf, char *end, const char *prefix, struct binder_buffer *buffer)
+static char *print_binder_buffer(char *buf, char *end, const char *prefix,
+				 struct binder_buffer *buffer)
 {
 	buf += snprintf(buf, end - buf, "%s %d: %p size %zd:%zd %s\n",
 			prefix, buffer->debug_id, buffer->data,
@@ -3063,7 +3108,8 @@ static char *print_binder_buffer(char *buf, char *end, const char *prefix, struc
 }
 
 static char *print_binder_work(char *buf, char *end, const char *prefix,
-	const char *transaction_prefix, struct binder_work *w)
+			       const char *transaction_prefix,
+			       struct binder_work *w)
 {
 	struct binder_node *node;
 	struct binder_transaction *t;
@@ -3080,7 +3126,8 @@ static char *print_binder_work(char *buf, char *end, const char *prefix,
 	case BINDER_WORK_NODE:
 		node = container_of(w, struct binder_node, work);
 		buf += snprintf(buf, end - buf, "%snode work %d: u%p c%p\n",
-				prefix, node->debug_id, node->ptr, node->cookie);
+				prefix, node->debug_id, node->ptr,
+				node->cookie);
 		break;
 	case BINDER_WORK_DEAD_BINDER:
 		buf += snprintf(buf, end - buf, "%shas dead binder\n", prefix);
@@ -3101,27 +3148,33 @@ static char *print_binder_work(char *buf, char *end, const char *prefix,
 	return buf;
 }
 
-static char *print_binder_thread(char *buf, char *end, struct binder_thread *thread, int print_always)
+static char *print_binder_thread(char *buf, char *end,
+				 struct binder_thread *thread,
+				 int print_always)
 {
 	struct binder_transaction *t;
 	struct binder_work *w;
 	char *start_buf = buf;
 	char *header_buf;
 
-	buf += snprintf(buf, end - buf, "  thread %d: l %02x\n", thread->pid, thread->looper);
+	buf += snprintf(buf, end - buf, "  thread %d: l %02x\n",
+			thread->pid, thread->looper);
 	header_buf = buf;
 	t = thread->transaction_stack;
 	while (t) {
 		if (buf >= end)
 			break;
 		if (t->from == thread) {
-			buf = print_binder_transaction(buf, end, "    outgoing transaction", t);
+			buf = print_binder_transaction(buf, end,
+						"    outgoing transaction", t);
 			t = t->from_parent;
 		} else if (t->to_thread == thread) {
-			buf = print_binder_transaction(buf, end, "    incoming transaction", t);
+			buf = print_binder_transaction(buf, end,
+						"    incoming transaction", t);
 			t = t->to_parent;
 		} else {
-			buf = print_binder_transaction(buf, end, "    bad transaction", t);
+			buf = print_binder_transaction(buf, end,
+						"    bad transaction", t);
 			t = NULL;
 		}
 	}
@@ -3142,11 +3195,14 @@ static char *print_binder_node(char *buf, char *end, struct binder_node *node)
 	struct hlist_node *pos;
 	struct binder_work *w;
 	int count;
+
 	count = 0;
 	hlist_for_each_entry(ref, pos, &node->refs, node_entry)
 		count++;
 
-	buf += snprintf(buf, end - buf, "  node %d: u%p c%p hs %d hw %d ls %d lw %d is %d iw %d",
+	buf += snprintf(buf, end - buf,
+			"  node %d: u%p c%p hs %d hw %d ls %d lw %d "
+			"is %d iw %d",
 			node->debug_id, node->ptr, node->cookie,
 			node->has_strong_ref, node->has_weak_ref,
 			node->local_strong_refs, node->local_weak_refs,
@@ -3175,13 +3231,16 @@ static char *print_binder_node(char *buf, char *end, struct binder_node *node)
 
 static char *print_binder_ref(char *buf, char *end, struct binder_ref *ref)
 {
-	buf += snprintf(buf, end - buf, "  ref %d: desc %d %snode %d s %d w %d d %p\n",
-			ref->debug_id, ref->desc, ref->node->proc ? "" : "dead ",
-			ref->node->debug_id, ref->strong, ref->weak, ref->death);
+	buf += snprintf(buf, end - buf,
+			"  ref %d: desc %d %snode %d s %d w %d d %p\n",
+			ref->debug_id, ref->desc,
+			ref->node->proc ? "" : "dead ", ref->node->debug_id,
+			ref->strong, ref->weak, ref->death);
 	return buf;
 }
 
-static char *print_binder_proc(char *buf, char *end, struct binder_proc *proc, int print_all)
+static char *print_binder_proc(char *buf, char *end,
+			       struct binder_proc *proc, int print_all)
 {
 	struct binder_work *w;
 	struct rb_node *n;
@@ -3191,19 +3250,34 @@ static char *print_binder_proc(char *buf, char *end, struct binder_proc *proc, i
 	buf += snprintf(buf, end - buf, "proc %d\n", proc->pid);
 	header_buf = buf;
 
-	for (n = rb_first(&proc->threads); n != NULL && buf < end; n = rb_next(n))
-		buf = print_binder_thread(buf, end, rb_entry(n, struct binder_thread, rb_node), print_all);
-	for (n = rb_first(&proc->nodes); n != NULL && buf < end; n = rb_next(n)) {
-		struct binder_node *node = rb_entry(n, struct binder_node, rb_node);
+	for (n = rb_first(&proc->threads);
+	     n != NULL && buf < end;
+	     n = rb_next(n))
+		buf = print_binder_thread(buf, end,
+					  rb_entry(n, struct binder_thread,
+						   rb_node), print_all);
+	for (n = rb_first(&proc->nodes);
+	     n != NULL && buf < end;
+	     n = rb_next(n)) {
+		struct binder_node *node = rb_entry(n, struct binder_node,
+						    rb_node);
 		if (print_all || node->has_async_transaction)
 			buf = print_binder_node(buf, end, node);
 	}
 	if (print_all) {
-		for (n = rb_first(&proc->refs_by_desc); n != NULL && buf < end; n = rb_next(n))
-			buf = print_binder_ref(buf, end, rb_entry(n, struct binder_ref, rb_node_desc));
-	}
-	for (n = rb_first(&proc->allocated_buffers); n != NULL && buf < end; n = rb_next(n))
-		buf = print_binder_buffer(buf, end, "  buffer", rb_entry(n, struct binder_buffer, rb_node));
+		for (n = rb_first(&proc->refs_by_desc);
+		     n != NULL && buf < end;
+		     n = rb_next(n))
+			buf = print_binder_ref(buf, end,
+					       rb_entry(n, struct binder_ref,
+							rb_node_desc));
+	}
+	for (n = rb_first(&proc->allocated_buffers);
+	     n != NULL && buf < end;
+	     n = rb_next(n))
+		buf = print_binder_buffer(buf, end, "  buffer",
+					  rb_entry(n, struct binder_buffer,
+						   rb_node));
 	list_for_each_entry(w, &proc->todo, entry) {
 		if (buf >= end)
 			break;
@@ -3213,7 +3287,8 @@ static char *print_binder_proc(char *buf, char *end, struct binder_proc *proc, i
 	list_for_each_entry(w, &proc->delivered_death, entry) {
 		if (buf >= end)
 			break;
-		buf += snprintf(buf, end - buf, "  has delivered dead binder\n");
+		buf += snprintf(buf, end - buf,
+				"  has delivered dead binder\n");
 		break;
 	}
 	if (!print_all && buf == header_buf)
@@ -3272,20 +3347,24 @@ static const char *binder_objstat_strings[] = {
 	"transaction_complete"
 };
 
-static char *print_binder_stats(char *buf, char *end, const char *prefix, struct binder_stats *stats)
+static char *print_binder_stats(char *buf, char *end, const char *prefix,
+				struct binder_stats *stats)
 {
 	int i;
 
-	BUILD_BUG_ON(ARRAY_SIZE(stats->bc) != ARRAY_SIZE(binder_command_strings));
+	BUILD_BUG_ON(ARRAY_SIZE(stats->bc) !=
+			ARRAY_SIZE(binder_command_strings));
 	for (i = 0; i < ARRAY_SIZE(stats->bc); i++) {
 		if (stats->bc[i])
 			buf += snprintf(buf, end - buf, "%s%s: %d\n", prefix,
-					binder_command_strings[i], stats->bc[i]);
+					binder_command_strings[i],
+					stats->bc[i]);
 		if (buf >= end)
 			return buf;
 	}
 
-	BUILD_BUG_ON(ARRAY_SIZE(stats->br) != ARRAY_SIZE(binder_return_strings));
+	BUILD_BUG_ON(ARRAY_SIZE(stats->br) !=
+			ARRAY_SIZE(binder_return_strings));
 	for (i = 0; i < ARRAY_SIZE(stats->br); i++) {
 		if (stats->br[i])
 			buf += snprintf(buf, end - buf, "%s%s: %d\n", prefix,
@@ -3294,13 +3373,17 @@ static char *print_binder_stats(char *buf, char *end, const char *prefix, struct
 			return buf;
 	}
 
-	BUILD_BUG_ON(ARRAY_SIZE(stats->obj_created) != ARRAY_SIZE(binder_objstat_strings));
-	BUILD_BUG_ON(ARRAY_SIZE(stats->obj_created) != ARRAY_SIZE(stats->obj_deleted));
+	BUILD_BUG_ON(ARRAY_SIZE(stats->obj_created) !=
+			ARRAY_SIZE(binder_objstat_strings));
+	BUILD_BUG_ON(ARRAY_SIZE(stats->obj_created) !=
+			ARRAY_SIZE(stats->obj_deleted));
 	for (i = 0; i < ARRAY_SIZE(stats->obj_created); i++) {
 		if (stats->obj_created[i] || stats->obj_deleted[i])
-			buf += snprintf(buf, end - buf, "%s%s: active %d total %d\n", prefix,
+			buf += snprintf(buf, end - buf,
+					"%s%s: active %d total %d\n", prefix,
 					binder_objstat_strings[i],
-					stats->obj_created[i] - stats->obj_deleted[i],
+					stats->obj_created[i] -
+						stats->obj_deleted[i],
 					stats->obj_created[i]);
 		if (buf >= end)
 			return buf;
@@ -3308,7 +3391,8 @@ static char *print_binder_stats(char *buf, char *end, const char *prefix, struct
 	return buf;
 }
 
-static char *print_binder_proc_stats(char *buf, char *end, struct binder_proc *proc)
+static char *print_binder_proc_stats(char *buf, char *end,
+				     struct binder_proc *proc)
 {
 	struct binder_work *w;
 	struct rb_node *n;
@@ -3340,12 +3424,14 @@ static char *print_binder_proc_stats(char *buf, char *end, struct binder_proc *p
 	strong = 0;
 	weak = 0;
 	for (n = rb_first(&proc->refs_by_desc); n != NULL; n = rb_next(n)) {
-		struct binder_ref *ref = rb_entry(n, struct binder_ref, rb_node_desc);
+		struct binder_ref *ref = rb_entry(n, struct binder_ref,
+						  rb_node_desc);
 		count++;
 		strong += ref->strong;
 		weak += ref->weak;
 	}
-	buf += snprintf(buf, end - buf, "  refs: %d s %d w %d\n", count, strong, weak);
+	buf += snprintf(buf, end - buf, "  refs: %d s %d w %d\n",
+			count, strong, weak);
 	if (buf >= end)
 		return buf;
 
@@ -3376,8 +3462,8 @@ static char *print_binder_proc_stats(char *buf, char *end, struct binder_proc *p
 }
 
 
-static int binder_read_proc_state(
-	char *page, char **start, off_t off, int count, int *eof, void *data)
+static int binder_read_proc_state(char *page, char **start, off_t off,
+				  int count, int *eof, void *data)
 {
 	struct binder_proc *proc;
 	struct hlist_node *pos;
@@ -3424,8 +3510,8 @@ static int binder_read_proc_state(
 	return len < count ? len  : count;
 }
 
-static int binder_read_proc_stats(
-	char *page, char **start, off_t off, int count, int *eof, void *data)
+static int binder_read_proc_stats(char *page, char **start, off_t off,
+				  int count, int *eof, void *data)
 {
 	struct binder_proc *proc;
 	struct hlist_node *pos;
@@ -3464,8 +3550,8 @@ static int binder_read_proc_stats(
 	return len < count ? len  : count;
 }
 
-static int binder_read_proc_transactions(
-	char *page, char **start, off_t off, int count, int *eof, void *data)
+static int binder_read_proc_transactions(char *page, char **start, off_t off,
+					 int count, int *eof, void *data)
 {
 	struct binder_proc *proc;
 	struct hlist_node *pos;
@@ -3502,8 +3588,8 @@ static int binder_read_proc_transactions(
 	return len < count ? len  : count;
 }
 
-static int binder_read_proc_proc(
-	char *page, char **start, off_t off, int count, int *eof, void *data)
+static int binder_read_proc_proc(char *page, char **start, off_t off,
+				 int count, int *eof, void *data)
 {
 	struct binder_proc *proc = data;
 	int len = 0;
@@ -3533,9 +3619,12 @@ static int binder_read_proc_proc(
 	return len < count ? len  : count;
 }
 
-static char *print_binder_transaction_log_entry(char *buf, char *end, struct binder_transaction_log_entry *e)
+static char *print_binder_transaction_log_entry(char *buf, char *end,
+					struct binder_transaction_log_entry *e)
 {
-	buf += snprintf(buf, end - buf, "%d: %s from %d:%d to %d:%d node %d handle %d size %d:%d\n",
+	buf += snprintf(buf, end - buf,
+			"%d: %s from %d:%d to %d:%d node %d handle %d "
+			"size %d:%d\n",
 			e->debug_id, (e->call_type == 2) ? "reply" :
 			((e->call_type == 1) ? "async" : "call "), e->from_proc,
 			e->from_thread, e->to_proc, e->to_thread, e->to_node,
@@ -3559,13 +3648,15 @@ static int binder_read_proc_transaction_log(
 		for (i = log->next; i < ARRAY_SIZE(log->entry); i++) {
 			if (buf >= end)
 				break;
-			buf = print_binder_transaction_log_entry(buf, end, &log->entry[i]);
+			buf = print_binder_transaction_log_entry(buf, end,
+								&log->entry[i]);
 		}
 	}
 	for (i = 0; i < log->next; i++) {
 		if (buf >= end)
 			break;
-		buf = print_binder_transaction_log_entry(buf, end, &log->entry[i]);
+		buf = print_binder_transaction_log_entry(buf, end,
+							 &log->entry[i]);
 	}
 
 	*start = page + off;
@@ -3579,7 +3670,7 @@ static int binder_read_proc_transaction_log(
 	return len < count ? len  : count;
 }
 
-static struct file_operations binder_fops = {
+static const struct file_operations binder_fops = {
 	.owner = THIS_MODULE,
 	.poll = binder_poll,
 	.unlocked_ioctl = binder_ioctl,
@@ -3601,14 +3692,35 @@ static int __init binder_init(void)
 
 	binder_proc_dir_entry_root = proc_mkdir("binder", NULL);
 	if (binder_proc_dir_entry_root)
-		binder_proc_dir_entry_proc = proc_mkdir("proc", binder_proc_dir_entry_root);
+		binder_proc_dir_entry_proc = proc_mkdir("proc",
+						binder_proc_dir_entry_root);
 	ret = misc_register(&binder_miscdev);
 	if (binder_proc_dir_entry_root) {
-		create_proc_read_entry("state", S_IRUGO, binder_proc_dir_entry_root, binder_read_proc_state, NULL);
-		create_proc_read_entry("stats", S_IRUGO, binder_proc_dir_entry_root, binder_read_proc_stats, NULL);
-		create_proc_read_entry("transactions", S_IRUGO, binder_proc_dir_entry_root, binder_read_proc_transactions, NULL);
-		create_proc_read_entry("transaction_log", S_IRUGO, binder_proc_dir_entry_root, binder_read_proc_transaction_log, &binder_transaction_log);
-		create_proc_read_entry("failed_transaction_log", S_IRUGO, binder_proc_dir_entry_root, binder_read_proc_transaction_log, &binder_transaction_log_failed);
+		create_proc_read_entry("state",
+				       S_IRUGO,
+				       binder_proc_dir_entry_root,
+				       binder_read_proc_state,
+				       NULL);
+		create_proc_read_entry("stats",
+				       S_IRUGO,
+				       binder_proc_dir_entry_root,
+				       binder_read_proc_stats,
+				       NULL);
+		create_proc_read_entry("transactions",
+				       S_IRUGO,
+				       binder_proc_dir_entry_root,
+				       binder_read_proc_transactions,
+				       NULL);
+		create_proc_read_entry("transaction_log",
+				       S_IRUGO,
+				       binder_proc_dir_entry_root,
+				       binder_read_proc_transaction_log,
+				       &binder_transaction_log);
+		create_proc_read_entry("failed_transaction_log",
+				       S_IRUGO,
+				       binder_proc_dir_entry_root,
+				       binder_read_proc_transaction_log,
+				       &binder_transaction_log_failed);
 	}
 	return ret;
 }
diff --git a/drivers/staging/android/logger.c b/drivers/staging/android/logger.c
index ab32003ecd0..6c10b456c6c 100644
--- a/drivers/staging/android/logger.c
+++ b/drivers/staging/android/logger.c
@@ -35,7 +35,7 @@
  * mutex 'mutex'.
  */
 struct logger_log {
-	unsigned char *		buffer;	/* the ring buffer itself */
+	unsigned char 		*buffer;/* the ring buffer itself */
 	struct miscdevice	misc;	/* misc device representing the log */
 	wait_queue_head_t	wq;	/* wait queue for readers */
 	struct list_head	readers; /* this log's readers */
@@ -52,7 +52,7 @@ struct logger_log {
  * reference counting. The structure is protected by log->mutex.
  */
 struct logger_reader {
-	struct logger_log *	log;	/* associated log */
+	struct logger_log	*log;	/* associated log */
 	struct list_head	list;	/* entry in logger_log's list */
 	size_t			r_off;	/* current read head offset */
 };
@@ -74,7 +74,7 @@ struct logger_reader {
  * file->logger_log. Thus what file->private_data points at depends on whether
  * or not the file was opened for reading. This function hides that dirtiness.
  */
-static inline struct logger_log * file_get_log(struct file *file)
+static inline struct logger_log *file_get_log(struct file *file)
 {
 	if (file->f_mode & FMODE_READ) {
 		struct logger_reader *reader = file->private_data;
@@ -379,7 +379,7 @@ ssize_t logger_aio_write(struct kiocb *iocb, const struct iovec *iov,
 	return ret;
 }
 
-static struct logger_log * get_log_from_minor(int);
+static struct logger_log *get_log_from_minor(int);
 
 /*
  * logger_open - the log's open() file operation
@@ -519,7 +519,7 @@ static long logger_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	return ret;
 }
 
-static struct file_operations logger_fops = {
+static const struct file_operations logger_fops = {
 	.owner = THIS_MODULE,
 	.read = logger_read,
 	.aio_write = logger_aio_write,
@@ -557,7 +557,7 @@ DEFINE_LOGGER_DEVICE(log_main, LOGGER_LOG_MAIN, 64*1024)
 DEFINE_LOGGER_DEVICE(log_events, LOGGER_LOG_EVENTS, 256*1024)
 DEFINE_LOGGER_DEVICE(log_radio, LOGGER_LOG_RADIO, 64*1024)
 
-static struct logger_log * get_log_from_minor(int minor)
+static struct logger_log *get_log_from_minor(int minor)
 {
 	if (log_main.misc.minor == minor)
 		return &log_main;
diff --git a/drivers/staging/android/lowmemorykiller.c b/drivers/staging/android/lowmemorykiller.c
index 3715d56ca96..fe72240f5a9 100644
--- a/drivers/staging/android/lowmemorykiller.c
+++ b/drivers/staging/android/lowmemorykiller.c
@@ -34,18 +34,24 @@ static int lowmem_adj[6] = {
 };
 static int lowmem_adj_size = 4;
 static size_t lowmem_minfree[6] = {
-	3*512, // 6MB
-	2*1024, // 8MB
-	4*1024, // 16MB
-	16*1024, // 64MB
+	3 * 512,	/* 6MB */
+	2 * 1024,	/* 8MB */
+	4 * 1024,	/* 16MB */
+	16 * 1024,	/* 64MB */
 };
 static int lowmem_minfree_size = 4;
 
-#define lowmem_print(level, x...) do { if(lowmem_debug_level >= (level)) printk(x); } while(0)
+#define lowmem_print(level, x...)			\
+	do {						\
+		if (lowmem_debug_level >= (level))	\
+			printk(x);			\
+	} while (0)
 
 module_param_named(cost, lowmem_shrinker.seeks, int, S_IRUGO | S_IWUSR);
-module_param_array_named(adj, lowmem_adj, int, &lowmem_adj_size, S_IRUGO | S_IWUSR);
-module_param_array_named(minfree, lowmem_minfree, uint, &lowmem_minfree_size, S_IRUGO | S_IWUSR);
+module_param_array_named(adj, lowmem_adj, int, &lowmem_adj_size,
+			 S_IRUGO | S_IWUSR);
+module_param_array_named(minfree, lowmem_minfree, uint, &lowmem_minfree_size,
+			 S_IRUGO | S_IWUSR);
 module_param_named(debug_level, lowmem_debug_level, uint, S_IRUGO | S_IWUSR);
 
 static int lowmem_shrink(int nr_to_scan, gfp_t gfp_mask)
@@ -57,46 +63,77 @@ static int lowmem_shrink(int nr_to_scan, gfp_t gfp_mask)
 	int i;
 	int min_adj = OOM_ADJUST_MAX + 1;
 	int selected_tasksize = 0;
+	int selected_oom_adj;
 	int array_size = ARRAY_SIZE(lowmem_adj);
-	int other_free = global_page_state(NR_FREE_PAGES) + global_page_state(NR_FILE_PAGES);
-	if(lowmem_adj_size < array_size)
+	int other_free = global_page_state(NR_FREE_PAGES);
+	int other_file = global_page_state(NR_FILE_PAGES);
+
+	if (lowmem_adj_size < array_size)
 		array_size = lowmem_adj_size;
-	if(lowmem_minfree_size < array_size)
+	if (lowmem_minfree_size < array_size)
 		array_size = lowmem_minfree_size;
-	for(i = 0; i < array_size; i++) {
-		if(other_free < lowmem_minfree[i]) {
+	for (i = 0; i < array_size; i++) {
+		if (other_free < lowmem_minfree[i] &&
+		    other_file < lowmem_minfree[i]) {
 			min_adj = lowmem_adj[i];
 			break;
 		}
 	}
-	if(nr_to_scan > 0)
-		lowmem_print(3, "lowmem_shrink %d, %x, ofree %d, ma %d\n", nr_to_scan, gfp_mask, other_free, min_adj);
+	if (nr_to_scan > 0)
+		lowmem_print(3, "lowmem_shrink %d, %x, ofree %d %d, ma %d\n",
+			     nr_to_scan, gfp_mask, other_free, other_file,
+			     min_adj);
+	rem = global_page_state(NR_ACTIVE_ANON) +
+		global_page_state(NR_ACTIVE_FILE) +
+		global_page_state(NR_INACTIVE_ANON) +
+		global_page_state(NR_INACTIVE_FILE);
+	if (nr_to_scan <= 0 || min_adj == OOM_ADJUST_MAX + 1) {
+		lowmem_print(5, "lowmem_shrink %d, %x, return %d\n",
+			     nr_to_scan, gfp_mask, rem);
+		return rem;
+	}
+	selected_oom_adj = min_adj;
+
 	read_lock(&tasklist_lock);
 	for_each_process(p) {
-		if(p->oomkilladj >= 0 && p->mm) {
-			tasksize = get_mm_rss(p->mm);
-			if(nr_to_scan > 0 && tasksize > 0 && p->oomkilladj >= min_adj) {
-				if(selected == NULL ||
-				   p->oomkilladj > selected->oomkilladj ||
-				   (p->oomkilladj == selected->oomkilladj &&
-				    tasksize > selected_tasksize)) {
-					selected = p;
-					selected_tasksize = tasksize;
-					lowmem_print(2, "select %d (%s), adj %d, size %d, to kill\n",
-					             p->pid, p->comm, p->oomkilladj, tasksize);
-				}
-			}
-			rem += tasksize;
+		int oom_adj;
+
+		task_lock(p);
+		if (!p->mm) {
+			task_unlock(p);
+			continue;
+		}
+		oom_adj = p->oomkilladj;
+		if (oom_adj < min_adj) {
+			task_unlock(p);
+			continue;
+		}
+		tasksize = get_mm_rss(p->mm);
+		task_unlock(p);
+		if (tasksize <= 0)
+			continue;
+		if (selected) {
+			if (oom_adj < selected_oom_adj)
+				continue;
+			if (oom_adj == selected_oom_adj &&
+			    tasksize <= selected_tasksize)
+				continue;
 		}
+		selected = p;
+		selected_tasksize = tasksize;
+		selected_oom_adj = oom_adj;
+		lowmem_print(2, "select %d (%s), adj %d, size %d, to kill\n",
+			     p->pid, p->comm, oom_adj, tasksize);
 	}
-	if(selected != NULL) {
+	if (selected) {
 		lowmem_print(1, "send sigkill to %d (%s), adj %d, size %d\n",
-		             selected->pid, selected->comm,
-		             selected->oomkilladj, selected_tasksize);
+			     selected->pid, selected->comm,
+			     selected_oom_adj, selected_tasksize);
 		force_sig(SIGKILL, selected);
 		rem -= selected_tasksize;
 	}
-	lowmem_print(4, "lowmem_shrink %d, %x, return %d\n", nr_to_scan, gfp_mask, rem);
+	lowmem_print(4, "lowmem_shrink %d, %x, return %d\n",
+		     nr_to_scan, gfp_mask, rem);
 	read_unlock(&tasklist_lock);
 	return rem;
 }
diff --git a/drivers/staging/android/ram_console.c b/drivers/staging/android/ram_console.c
index 3375c1cce2b..8f18a59744c 100644
--- a/drivers/staging/android/ram_console.c
+++ b/drivers/staging/android/ram_console.c
@@ -20,7 +20,7 @@
 #include <linux/proc_fs.h>
 #include <linux/string.h>
 #include <linux/uaccess.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 #ifdef CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION
 #include <linux/rslib.h>
@@ -225,8 +225,9 @@ static int __init ram_console_init(struct ram_console_buffer *buffer,
 		buffer_size - sizeof(struct ram_console_buffer);
 
 	if (ram_console_buffer_size > buffer_size) {
-		pr_err("ram_console: buffer %p, invalid size %zu, datasize %zu\n",
-		       buffer, buffer_size, ram_console_buffer_size);
+		pr_err("ram_console: buffer %p, invalid size %zu, "
+		       "datasize %zu\n", buffer, buffer_size,
+		       ram_console_buffer_size);
 		return 0;
 	}
 
@@ -365,7 +366,7 @@ static ssize_t ram_console_read_old(struct file *file, char __user *buf,
 	return count;
 }
 
-static struct file_operations ram_console_file_ops = {
+static const struct file_operations ram_console_file_ops = {
 	.owner = THIS_MODULE,
 	.read = ram_console_read_old,
 };
diff --git a/drivers/staging/android/timed_gpio.c b/drivers/staging/android/timed_gpio.c
index 33daff0481d..be7cdaa783a 100644
--- a/drivers/staging/android/timed_gpio.c
+++ b/drivers/staging/android/timed_gpio.c
@@ -20,13 +20,12 @@
 #include <linux/err.h>
 #include <linux/gpio.h>
 
+#include "timed_output.h"
 #include "timed_gpio.h"
 
 
-static struct class *timed_gpio_class;
-
 struct timed_gpio_data {
-	struct device *dev;
+	struct timed_output_dev dev;
 	struct hrtimer timer;
 	spinlock_t lock;
 	unsigned 	gpio;
@@ -36,70 +35,62 @@ struct timed_gpio_data {
 
 static enum hrtimer_restart gpio_timer_func(struct hrtimer *timer)
 {
-	struct timed_gpio_data *gpio_data = container_of(timer, struct timed_gpio_data, timer);
+	struct timed_gpio_data *data =
+		container_of(timer, struct timed_gpio_data, timer);
 
-	gpio_direction_output(gpio_data->gpio, gpio_data->active_low ? 1 : 0);
+	gpio_direction_output(data->gpio, data->active_low ? 1 : 0);
 	return HRTIMER_NORESTART;
 }
 
-static ssize_t gpio_enable_show(struct device *dev, struct device_attribute *attr, char *buf)
+static int gpio_get_time(struct timed_output_dev *dev)
 {
-	struct timed_gpio_data *gpio_data = dev_get_drvdata(dev);
-	int remaining;
+	struct timed_gpio_data	*data =
+		container_of(dev, struct timed_gpio_data, dev);
 
-	if (hrtimer_active(&gpio_data->timer)) {
-		ktime_t r = hrtimer_get_remaining(&gpio_data->timer);
+	if (hrtimer_active(&data->timer)) {
+		ktime_t r = hrtimer_get_remaining(&data->timer);
 		struct timeval t = ktime_to_timeval(r);
-		remaining = t.tv_sec * 1000 + t.tv_usec / 1000;
+		return t.tv_sec * 1000 + t.tv_usec / 1000;
 	} else
-		remaining = 0;
-
-	return sprintf(buf, "%d\n", remaining);
+		return 0;
 }
 
-static ssize_t gpio_enable_store(
-		struct device *dev, struct device_attribute *attr,
-		const char *buf, size_t size)
+static void gpio_enable(struct timed_output_dev *dev, int value)
 {
-	struct timed_gpio_data *gpio_data = dev_get_drvdata(dev);
-	int value;
+	struct timed_gpio_data	*data =
+		container_of(dev, struct timed_gpio_data, dev);
 	unsigned long	flags;
 
-	sscanf(buf, "%d", &value);
-
-	spin_lock_irqsave(&gpio_data->lock, flags);
+	spin_lock_irqsave(&data->lock, flags);
 
 	/* cancel previous timer and set GPIO according to value */
-	hrtimer_cancel(&gpio_data->timer);
-	gpio_direction_output(gpio_data->gpio, gpio_data->active_low ? !value : !!value);
+	hrtimer_cancel(&data->timer);
+	gpio_direction_output(data->gpio, data->active_low ? !value : !!value);
 
 	if (value > 0) {
-		if (value > gpio_data->max_timeout)
-			value = gpio_data->max_timeout;
+		if (value > data->max_timeout)
+			value = data->max_timeout;
 
-		hrtimer_start(&gpio_data->timer,
-						ktime_set(value / 1000, (value % 1000) * 1000000),
-						HRTIMER_MODE_REL);
+		hrtimer_start(&data->timer,
+			ktime_set(value / 1000, (value % 1000) * 1000000),
+			HRTIMER_MODE_REL);
 	}
 
-	spin_unlock_irqrestore(&gpio_data->lock, flags);
-
-	return size;
+	spin_unlock_irqrestore(&data->lock, flags);
 }
 
-static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR, gpio_enable_show, gpio_enable_store);
-
 static int timed_gpio_probe(struct platform_device *pdev)
 {
 	struct timed_gpio_platform_data *pdata = pdev->dev.platform_data;
 	struct timed_gpio *cur_gpio;
 	struct timed_gpio_data *gpio_data, *gpio_dat;
-	int i, ret = 0;
+	int i, j, ret = 0;
 
 	if (!pdata)
 		return -EBUSY;
 
-	gpio_data = kzalloc(sizeof(struct timed_gpio_data) * pdata->num_gpios, GFP_KERNEL);
+	gpio_data = kzalloc(sizeof(struct timed_gpio_data) * pdata->num_gpios,
+			GFP_KERNEL);
 	if (!gpio_data)
 		return -ENOMEM;
 
@@ -107,23 +98,26 @@ static int timed_gpio_probe(struct platform_device *pdev)
 		cur_gpio = &pdata->gpios[i];
 		gpio_dat = &gpio_data[i];
 
-		hrtimer_init(&gpio_dat->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+		hrtimer_init(&gpio_dat->timer, CLOCK_MONOTONIC,
+				HRTIMER_MODE_REL);
 		gpio_dat->timer.function = gpio_timer_func;
 		spin_lock_init(&gpio_dat->lock);
 
+		gpio_dat->dev.name = cur_gpio->name;
+		gpio_dat->dev.get_time = gpio_get_time;
+		gpio_dat->dev.enable = gpio_enable;
+		ret = timed_output_dev_register(&gpio_dat->dev);
+		if (ret < 0) {
+			for (j = 0; j < i; j++)
+				timed_output_dev_unregister(&gpio_data[i].dev);
+			kfree(gpio_data);
+			return ret;
+		}
+
 		gpio_dat->gpio = cur_gpio->gpio;
 		gpio_dat->max_timeout = cur_gpio->max_timeout;
 		gpio_dat->active_low = cur_gpio->active_low;
 		gpio_direction_output(gpio_dat->gpio, gpio_dat->active_low);
-
-		gpio_dat->dev = device_create(timed_gpio_class, &pdev->dev, 0, "%s", cur_gpio->name);
-		if (unlikely(IS_ERR(gpio_dat->dev)))
-			return PTR_ERR(gpio_dat->dev);
-
-		dev_set_drvdata(gpio_dat->dev, gpio_dat);
-		ret = device_create_file(gpio_dat->dev, &dev_attr_enable);
-		if (ret)
-			return ret;
 	}
 
 	platform_set_drvdata(pdev, gpio_data);
@@ -137,10 +131,8 @@ static int timed_gpio_remove(struct platform_device *pdev)
 	struct timed_gpio_data *gpio_data = platform_get_drvdata(pdev);
 	int i;
 
-	for (i = 0; i < pdata->num_gpios; i++) {
-		device_remove_file(gpio_data[i].dev, &dev_attr_enable);
-		device_unregister(gpio_data[i].dev);
-	}
+	for (i = 0; i < pdata->num_gpios; i++)
+		timed_output_dev_unregister(&gpio_data[i].dev);
 
 	kfree(gpio_data);
 
@@ -151,22 +143,18 @@ static struct platform_driver timed_gpio_driver = {
 	.probe		= timed_gpio_probe,
 	.remove		= timed_gpio_remove,
 	.driver		= {
-		.name		= "timed-gpio",
+		.name		= TIMED_GPIO_NAME,
 		.owner		= THIS_MODULE,
 	},
 };
 
 static int __init timed_gpio_init(void)
 {
-	timed_gpio_class = class_create(THIS_MODULE, "timed_output");
-	if (IS_ERR(timed_gpio_class))
-		return PTR_ERR(timed_gpio_class);
 	return platform_driver_register(&timed_gpio_driver);
 }
 
 static void __exit timed_gpio_exit(void)
 {
-	class_destroy(timed_gpio_class);
 	platform_driver_unregister(&timed_gpio_driver);
 }
 
diff --git a/drivers/staging/android/timed_gpio.h b/drivers/staging/android/timed_gpio.h
index 78449b2161c..a0e15f8be3f 100644
--- a/drivers/staging/android/timed_gpio.h
+++ b/drivers/staging/android/timed_gpio.h
@@ -16,10 +16,12 @@
 #ifndef _LINUX_TIMED_GPIO_H
 #define _LINUX_TIMED_GPIO_H
 
+#define TIMED_GPIO_NAME "timed-gpio"
+
 struct timed_gpio {
 	const char *name;
 	unsigned 	gpio;
-	int     max_timeout;
+	int		max_timeout;
 	u8 		active_low;
 };
 
diff --git a/drivers/staging/android/timed_output.c b/drivers/staging/android/timed_output.c
new file mode 100644
index 00000000000..62e79180421
--- /dev/null
+++ b/drivers/staging/android/timed_output.c
@@ -0,0 +1,121 @@
+/* drivers/misc/timed_output.c
+ *
+ * Copyright (C) 2009 Google, Inc.
+ * Author: Mike Lockwood <lockwood@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/err.h>
+
+#include "timed_output.h"
+
+static struct class *timed_output_class;
+static atomic_t device_count;
+
+static ssize_t enable_show(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct timed_output_dev *tdev = dev_get_drvdata(dev);
+	int remaining = tdev->get_time(tdev);
+
+	return sprintf(buf, "%d\n", remaining);
+}
+
+static ssize_t enable_store(
+		struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t size)
+{
+	struct timed_output_dev *tdev = dev_get_drvdata(dev);
+	int value;
+
+	sscanf(buf, "%d", &value);
+	tdev->enable(tdev, value);
+
+	return size;
+}
+
+static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR, enable_show, enable_store);
+
+static int create_timed_output_class(void)
+{
+	if (!timed_output_class) {
+		timed_output_class = class_create(THIS_MODULE, "timed_output");
+		if (IS_ERR(timed_output_class))
+			return PTR_ERR(timed_output_class);
+		atomic_set(&device_count, 0);
+	}
+
+	return 0;
+}
+
+int timed_output_dev_register(struct timed_output_dev *tdev)
+{
+	int ret;
+
+	if (!tdev || !tdev->name || !tdev->enable || !tdev->get_time)
+		return -EINVAL;
+
+	ret = create_timed_output_class();
+	if (ret < 0)
+		return ret;
+
+	tdev->index = atomic_inc_return(&device_count);
+	tdev->dev = device_create(timed_output_class, NULL,
+		MKDEV(0, tdev->index), NULL, tdev->name);
+	if (IS_ERR(tdev->dev))
+		return PTR_ERR(tdev->dev);
+
+	ret = device_create_file(tdev->dev, &dev_attr_enable);
+	if (ret < 0)
+		goto err_create_file;
+
+	dev_set_drvdata(tdev->dev, tdev);
+	tdev->state = 0;
+	return 0;
+
+err_create_file:
+	device_destroy(timed_output_class, MKDEV(0, tdev->index));
+	printk(KERN_ERR "timed_output: Failed to register driver %s\n",
+			tdev->name);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(timed_output_dev_register);
+
+void timed_output_dev_unregister(struct timed_output_dev *tdev)
+{
+	device_remove_file(tdev->dev, &dev_attr_enable);
+	device_destroy(timed_output_class, MKDEV(0, tdev->index));
+	dev_set_drvdata(tdev->dev, NULL);
+}
+EXPORT_SYMBOL_GPL(timed_output_dev_unregister);
+
+static int __init timed_output_init(void)
+{
+	return create_timed_output_class();
+}
+
+static void __exit timed_output_exit(void)
+{
+	class_destroy(timed_output_class);
+}
+
+module_init(timed_output_init);
+module_exit(timed_output_exit);
+
+MODULE_AUTHOR("Mike Lockwood <lockwood@android.com>");
+MODULE_DESCRIPTION("timed output class driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/android/timed_output.h b/drivers/staging/android/timed_output.h
new file mode 100644
index 00000000000..ec907ab2ff5
--- /dev/null
+++ b/drivers/staging/android/timed_output.h
@@ -0,0 +1,37 @@
+/* include/linux/timed_output.h
+ *
+ * Copyright (C) 2008 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+*/
+
+#ifndef _LINUX_TIMED_OUTPUT_H
+#define _LINUX_TIMED_OUTPUT_H
+
+struct timed_output_dev {
+	const char	*name;
+
+	/* enable the output and set the timer */
+	void	(*enable)(struct timed_output_dev *sdev, int timeout);
+
+	/* returns the current number of milliseconds remaining on the timer */
+	int		(*get_time)(struct timed_output_dev *sdev);
+
+	/* private data */
+	struct device	*dev;
+	int		index;
+	int		state;
+};
+
+extern int timed_output_dev_register(struct timed_output_dev *dev);
+extern void timed_output_dev_unregister(struct timed_output_dev *dev);
+
+#endif
diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c
index 04dde4b8281..9270f5df020 100644
--- a/drivers/staging/asus_oled/asus_oled.c
+++ b/drivers/staging/asus_oled/asus_oled.c
@@ -516,7 +516,7 @@ static ssize_t odev_set_picture(struct asus_oled_dev *odev, const char *buf, siz
 	max_offs = odev->width * odev->height;
 
 	while (offs < count && odev->buf_offs < max_offs) {
-		int ret;
+		int ret = 0;
 
 		if (buf[offs] == '1' || buf[offs] == '#') {
 			ret = append_values(odev, 1, 1);
diff --git a/drivers/staging/b3dfg/b3dfg.c b/drivers/staging/b3dfg/b3dfg.c
index 75ebe338c6f..eec9c99ffaa 100644
--- a/drivers/staging/b3dfg/b3dfg.c
+++ b/drivers/staging/b3dfg/b3dfg.c
@@ -35,14 +35,13 @@
 #include <linux/poll.h>
 #include <linux/wait.h>
 #include <linux/mm.h>
-#include <linux/version.h>
 #include <linux/uaccess.h>
 
 static unsigned int b3dfg_nbuf = 2;
 
 module_param_named(buffer_count, b3dfg_nbuf, uint, 0444);
 
-MODULE_PARM_DESC(buffer_count, "Number of buffers (min 2, default 2)\n");
+MODULE_PARM_DESC(buffer_count, "Number of buffers (min 2, default 2)");
 
 MODULE_AUTHOR("Daniel Drake <ddrake@brontes3d.com>");
 MODULE_DESCRIPTION("Brontes frame grabber driver");
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
index 2d819d278b0..af723cb9d08 100644
--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -13,13 +13,6 @@ config COMEDI_DEBUG
 	  This is an option for use by developers; most people should
 	  say N here. This enables comedi core and driver debugging.
 
-config COMEDI_RT
-	tristate "Comedi Real-time support"
-	depends on COMEDI && RT
-	default N
-	---help---
-	  Enable Real time support for the Comedi core.
-
 config COMEDI_PCI_DRIVERS
 	tristate "Comedi PCI drivers"
 	depends on COMEDI && PCI
@@ -29,10 +22,10 @@ config COMEDI_PCI_DRIVERS
 
 config COMEDI_PCMCIA_DRIVERS
 	tristate "Comedi PCMCIA drivers"
-	depends on COMEDI && PCMCIAI
+	depends on COMEDI && PCMCIA && PCCARD
 	default N
 	---help---
-	  Enable lots of comedi PCMCIA drivers to be built
+	  Enable lots of comedi PCMCIA and PCCARD drivers to be built
 
 config COMEDI_USB_DRIVERS
 	tristate "Comedi USB drivers"
diff --git a/drivers/staging/comedi/Makefile b/drivers/staging/comedi/Makefile
index afd1a19c1b8..05811f79d85 100644
--- a/drivers/staging/comedi/Makefile
+++ b/drivers/staging/comedi/Makefile
@@ -1,5 +1,4 @@
 obj-$(CONFIG_COMEDI) += comedi.o
-obj-$(CONFIG_COMEDI_RT) += comedi_rt.o
 
 obj-$(CONFIG_COMEDI)	+= kcomedilib/
 obj-$(CONFIG_COMEDI)	+= drivers/
@@ -11,7 +10,3 @@ comedi-objs :=		\
 	drivers.o	\
 	comedi_compat32.o \
 	comedi_ksyms.o	\
-
-comedi_rt-objs :=	\
-	rt_pend_tq.o	\
-	rt.o
diff --git a/drivers/staging/comedi/comedi.h b/drivers/staging/comedi/comedi.h
index e6b5f16edb0..8101cea8452 100644
--- a/drivers/staging/comedi/comedi.h
+++ b/drivers/staging/comedi/comedi.h
@@ -188,7 +188,6 @@ extern "C" {
 #define SDF_WRITABLE	0x00020000	/* subdevice can be written (e.g. analog output) */
 #define SDF_WRITEABLE	SDF_WRITABLE	/* spelling error in API */
 #define SDF_INTERNAL	0x00040000	/* subdevice does not have externally visible lines */
-#define SDF_RT		0x00080000	/* DEPRECATED: subdevice is RT capable */
 #define SDF_GROUND	0x00100000	/* can do aref=ground */
 #define SDF_COMMON	0x00200000	/* can do aref=common */
 #define SDF_DIFF	0x00400000	/* can do aref=diff */
diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c
index 19dce2ebfc1..9d7c99394ec 100644
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -44,6 +44,7 @@
 #include <linux/fs.h>
 #include "comedidev.h"
 #include <linux/cdev.h>
+#include <linux/stat.h>
 
 #include <linux/io.h>
 #include <linux/uaccess.h>
@@ -92,6 +93,15 @@ static int do_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
 static int comedi_fasync(int fd, struct file *file, int on);
 
 static int is_device_busy(struct comedi_device *dev);
+static int resize_async_buffer(struct comedi_device *dev,
+			       struct comedi_subdevice *s,
+			       struct comedi_async *async, unsigned new_size);
+
+/* declarations for sysfs attribute files */
+static struct device_attribute dev_attr_max_read_buffer_kb;
+static struct device_attribute dev_attr_read_buffer_kb;
+static struct device_attribute dev_attr_max_write_buffer_kb;
+static struct device_attribute dev_attr_write_buffer_kb;
 
 #ifdef HAVE_UNLOCKED_IOCTL
 static long comedi_unlocked_ioctl(struct file *file, unsigned int cmd,
@@ -277,7 +287,7 @@ static int do_bufconfig_ioctl(struct comedi_device *dev, void *arg)
 	struct comedi_bufconfig bc;
 	struct comedi_async *async;
 	struct comedi_subdevice *s;
-	int ret = 0;
+	int retval = 0;
 
 	if (copy_from_user(&bc, arg, sizeof(struct comedi_bufconfig)))
 		return -EFAULT;
@@ -303,37 +313,9 @@ static int do_bufconfig_ioctl(struct comedi_device *dev, void *arg)
 	}
 
 	if (bc.size) {
-		if (bc.size > async->max_bufsize)
-			return -EPERM;
-
-		if (s->busy) {
-			DPRINTK("subdevice is busy, cannot resize buffer\n");
-			return -EBUSY;
-		}
-		if (async->mmap_count) {
-			DPRINTK("subdevice is mmapped, cannot resize buffer\n");
-			return -EBUSY;
-		}
-
-		if (!async->prealloc_buf)
-			return -EINVAL;
-
-		/* make sure buffer is an integral number of pages
-		 * (we round up) */
-		bc.size = (bc.size + PAGE_SIZE - 1) & PAGE_MASK;
-
-		ret = comedi_buf_alloc(dev, s, bc.size);
-		if (ret < 0)
-			return ret;
-
-		if (s->buf_change) {
-			ret = s->buf_change(dev, s, bc.size);
-			if (ret < 0)
-				return ret;
-		}
-
-		DPRINTK("comedi%i subd %d buffer resized to %i bytes\n",
-			dev->minor, bc.subdevice, async->prealloc_bufsz);
+		retval = resize_async_buffer(dev, s, async, bc.size);
+		if (retval < 0)
+			return retval;
 	}
 
 	bc.size = async->prealloc_bufsz;
@@ -746,7 +728,7 @@ static int check_insn_config_length(struct comedi_insn *insn, unsigned int *data
 	/* by default we allow the insn since we don't have checks for
 	 * all possible cases yet */
 	default:
-		rt_printk("comedi: no check for data length of config insn id "
+		printk("comedi: no check for data length of config insn id "
 			  "%i is implemented.\n"
 			  " Add a check to %s in %s.\n"
 			  " Assuming n=%i is correct.\n", data[0], __func__,
@@ -1097,13 +1079,6 @@ static int do_cmd_ioctl(struct comedi_device *dev, void *arg, void *file)
 
 	comedi_set_subdevice_runflags(s, ~0, SRF_USER | SRF_RUNNING);
 
-#ifdef CONFIG_COMEDI_RT
-	if (async->cmd.flags & TRIG_RT) {
-		if (comedi_switch_to_rt(dev) == 0)
-			comedi_set_subdevice_runflags(s, SRF_RT, SRF_RT);
-	}
-#endif
-
 	ret = s->do_cmd(dev, s);
 	if (ret == 0)
 		return 0;
@@ -1237,12 +1212,12 @@ static int do_lock_ioctl(struct comedi_device *dev, unsigned int arg, void *file
 		return -EINVAL;
 	s = dev->subdevices + arg;
 
-	comedi_spin_lock_irqsave(&s->spin_lock, flags);
+	spin_lock_irqsave(&s->spin_lock, flags);
 	if (s->busy || s->lock)
 		ret = -EBUSY;
 	else
 		s->lock = file;
-	comedi_spin_unlock_irqrestore(&s->spin_lock, flags);
+	spin_unlock_irqrestore(&s->spin_lock, flags);
 
 	if (ret < 0)
 		return ret;
@@ -1738,12 +1713,6 @@ void do_become_nonbusy(struct comedi_device *dev, struct comedi_subdevice *s)
 	struct comedi_async *async = s->async;
 
 	comedi_set_subdevice_runflags(s, SRF_RUNNING, 0);
-#ifdef CONFIG_COMEDI_RT
-	if (comedi_get_subdevice_runflags(s) & SRF_RT) {
-		comedi_switch_to_non_rt(dev);
-		comedi_set_subdevice_runflags(s, SRF_RT, 0);
-	}
-#endif
 	if (async) {
 		comedi_reset_async_buf(async);
 		async->inttrig = NULL;
@@ -1970,8 +1939,6 @@ static int __init comedi_init(void)
 		}
 	}
 
-	comedi_rt_init();
-
 	comedi_register_ioctl32();
 
 	return 0;
@@ -1992,8 +1959,6 @@ static void __exit comedi_cleanup(void)
 
 	comedi_proc_cleanup();
 
-	comedi_rt_cleanup();
-
 	comedi_unregister_ioctl32();
 }
 
@@ -2002,8 +1967,7 @@ module_exit(comedi_cleanup);
 
 void comedi_error(const struct comedi_device *dev, const char *s)
 {
-	rt_printk("comedi%d: %s: %s\n", dev->minor, dev->driver->driver_name,
-		  s);
+	printk("comedi%d: %s: %s\n", dev->minor, dev->driver->driver_name, s);
 }
 
 void comedi_event(struct comedi_device *dev, struct comedi_subdevice *s)
@@ -2034,34 +1998,18 @@ void comedi_event(struct comedi_device *dev, struct comedi_subdevice *s)
 
 	if (async->cb_mask & s->async->events) {
 		if (comedi_get_subdevice_runflags(s) & SRF_USER) {
-
-			if (dev->rt) {
-#ifdef CONFIG_COMEDI_RT
-				/* pend wake up */
-				comedi_rt_pend_wakeup(&async->wait_head);
-#else
-				printk
-				    ("BUG: comedi_event() code unreachable\n");
-#endif
-			} else {
-				wake_up_interruptible(&async->wait_head);
-				if (s->subdev_flags & SDF_CMD_READ) {
-					kill_fasync(&dev->async_queue, SIGIO,
-						    POLL_IN);
-				}
-				if (s->subdev_flags & SDF_CMD_WRITE) {
-					kill_fasync(&dev->async_queue, SIGIO,
-						    POLL_OUT);
-				}
+			wake_up_interruptible(&async->wait_head);
+			if (s->subdev_flags & SDF_CMD_READ) {
+				kill_fasync(&dev->async_queue, SIGIO,
+					    POLL_IN);
+			}
+			if (s->subdev_flags & SDF_CMD_WRITE) {
+				kill_fasync(&dev->async_queue, SIGIO,
+					    POLL_OUT);
 			}
 		} else {
 			if (async->cb_func)
 				async->cb_func(s->async->events, async->cb_arg);
-			/* XXX bug here.  If subdevice A is rt, and
-			 * subdevice B tries to callback to a normal
-			 * linux kernel function, it will be at the
-			 * wrong priority.  Since this isn't very
-			 * common, I'm not going to worry about it. */
 		}
 	}
 	s->async->events = 0;
@@ -2072,10 +2020,10 @@ void comedi_set_subdevice_runflags(struct comedi_subdevice *s, unsigned mask,
 {
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&s->spin_lock, flags);
+	spin_lock_irqsave(&s->spin_lock, flags);
 	s->runflags &= ~mask;
 	s->runflags |= (bits & mask);
-	comedi_spin_unlock_irqrestore(&s->spin_lock, flags);
+	spin_unlock_irqrestore(&s->spin_lock, flags);
 }
 
 unsigned comedi_get_subdevice_runflags(struct comedi_subdevice *s)
@@ -2083,9 +2031,9 @@ unsigned comedi_get_subdevice_runflags(struct comedi_subdevice *s)
 	unsigned long flags;
 	unsigned runflags;
 
-	comedi_spin_lock_irqsave(&s->spin_lock, flags);
+	spin_lock_irqsave(&s->spin_lock, flags);
 	runflags = s->runflags;
-	comedi_spin_unlock_irqrestore(&s->spin_lock, flags);
+	spin_unlock_irqrestore(&s->spin_lock, flags);
 	return runflags;
 }
 
@@ -2132,6 +2080,7 @@ int comedi_alloc_board_minor(struct device *hardware_device)
 	struct comedi_device_file_info *info;
 	struct device *csdev;
 	unsigned i;
+	int retval;
 
 	info = kzalloc(sizeof(struct comedi_device_file_info), GFP_KERNEL);
 	if (info == NULL)
@@ -2142,20 +2091,19 @@ int comedi_alloc_board_minor(struct device *hardware_device)
 		return -ENOMEM;
 	}
 	comedi_device_init(info->device);
-	comedi_spin_lock_irqsave(&comedi_file_info_table_lock, flags);
+	spin_lock_irqsave(&comedi_file_info_table_lock, flags);
 	for (i = 0; i < COMEDI_NUM_BOARD_MINORS; ++i) {
 		if (comedi_file_info_table[i] == NULL) {
 			comedi_file_info_table[i] = info;
 			break;
 		}
 	}
-	comedi_spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
+	spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
 	if (i == COMEDI_NUM_BOARD_MINORS) {
 		comedi_device_cleanup(info->device);
 		kfree(info->device);
 		kfree(info);
-		rt_printk
-		    ("comedi: error: ran out of minor numbers for board device files.\n");
+		printk(KERN_ERR "comedi: error: ran out of minor numbers for board device files.\n");
 		return -EBUSY;
 	}
 	info->device->minor = i;
@@ -2164,7 +2112,35 @@ int comedi_alloc_board_minor(struct device *hardware_device)
 				     hardware_device, "comedi%i", i);
 	if (!IS_ERR(csdev))
 		info->device->class_dev = csdev;
-
+	dev_set_drvdata(csdev, info);
+	retval = device_create_file(csdev, &dev_attr_max_read_buffer_kb);
+	if (retval) {
+		printk(KERN_ERR "comedi: failed to create sysfs attribute file \"%s\".\n",
+			dev_attr_max_read_buffer_kb.attr.name);
+		comedi_free_board_minor(i);
+		return retval;
+	}
+	retval = device_create_file(csdev, &dev_attr_read_buffer_kb);
+	if (retval) {
+		printk(KERN_ERR "comedi: failed to create sysfs attribute file \"%s\".\n",
+			dev_attr_read_buffer_kb.attr.name);
+		comedi_free_board_minor(i);
+		return retval;
+	}
+	retval = device_create_file(csdev, &dev_attr_max_write_buffer_kb);
+	if (retval) {
+		printk(KERN_ERR "comedi: failed to create sysfs attribute file \"%s\".\n",
+			dev_attr_max_write_buffer_kb.attr.name);
+		comedi_free_board_minor(i);
+		return retval;
+	}
+	retval = device_create_file(csdev, &dev_attr_write_buffer_kb);
+	if (retval) {
+		printk(KERN_ERR "comedi: failed to create sysfs attribute file \"%s\".\n",
+			dev_attr_write_buffer_kb.attr.name);
+		comedi_free_board_minor(i);
+		return retval;
+	}
 	return i;
 }
 
@@ -2174,10 +2150,10 @@ void comedi_free_board_minor(unsigned minor)
 	struct comedi_device_file_info *info;
 
 	BUG_ON(minor >= COMEDI_NUM_BOARD_MINORS);
-	comedi_spin_lock_irqsave(&comedi_file_info_table_lock, flags);
+	spin_lock_irqsave(&comedi_file_info_table_lock, flags);
 	info = comedi_file_info_table[minor];
 	comedi_file_info_table[minor] = NULL;
-	comedi_spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
+	spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
 
 	if (info) {
 		struct comedi_device *dev = info->device;
@@ -2193,12 +2169,14 @@ void comedi_free_board_minor(unsigned minor)
 	}
 }
 
-int comedi_alloc_subdevice_minor(struct comedi_device *dev, struct comedi_subdevice *s)
+int comedi_alloc_subdevice_minor(struct comedi_device *dev,
+				 struct comedi_subdevice *s)
 {
 	unsigned long flags;
 	struct comedi_device_file_info *info;
 	struct device *csdev;
 	unsigned i;
+	int retval;
 
 	info = kmalloc(sizeof(struct comedi_device_file_info), GFP_KERNEL);
 	if (info == NULL)
@@ -2206,18 +2184,17 @@ int comedi_alloc_subdevice_minor(struct comedi_device *dev, struct comedi_subdev
 	info->device = dev;
 	info->read_subdevice = s;
 	info->write_subdevice = s;
-	comedi_spin_lock_irqsave(&comedi_file_info_table_lock, flags);
+	spin_lock_irqsave(&comedi_file_info_table_lock, flags);
 	for (i = COMEDI_FIRST_SUBDEVICE_MINOR; i < COMEDI_NUM_MINORS; ++i) {
 		if (comedi_file_info_table[i] == NULL) {
 			comedi_file_info_table[i] = info;
 			break;
 		}
 	}
-	comedi_spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
+	spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
 	if (i == COMEDI_NUM_MINORS) {
 		kfree(info);
-		rt_printk
-		    ("comedi: error: ran out of minor numbers for board device files.\n");
+		printk(KERN_ERR "comedi: error: ran out of minor numbers for board device files.\n");
 		return -EBUSY;
 	}
 	s->minor = i;
@@ -2227,7 +2204,35 @@ int comedi_alloc_subdevice_minor(struct comedi_device *dev, struct comedi_subdev
 				     (int)(s - dev->subdevices));
 	if (!IS_ERR(csdev))
 		s->class_dev = csdev;
-
+	dev_set_drvdata(csdev, info);
+	retval = device_create_file(csdev, &dev_attr_max_read_buffer_kb);
+	if (retval) {
+		printk(KERN_ERR "comedi: failed to create sysfs attribute file \"%s\".\n",
+			dev_attr_max_read_buffer_kb.attr.name);
+		comedi_free_subdevice_minor(s);
+		return retval;
+	}
+	retval = device_create_file(csdev, &dev_attr_read_buffer_kb);
+	if (retval) {
+		printk(KERN_ERR "comedi: failed to create sysfs attribute file \"%s\".\n",
+			dev_attr_read_buffer_kb.attr.name);
+		comedi_free_subdevice_minor(s);
+		return retval;
+	}
+	retval = device_create_file(csdev, &dev_attr_max_write_buffer_kb);
+	if (retval) {
+		printk(KERN_ERR "comedi: failed to create sysfs attribute file \"%s\".\n",
+			dev_attr_max_write_buffer_kb.attr.name);
+		comedi_free_subdevice_minor(s);
+		return retval;
+	}
+	retval = device_create_file(csdev, &dev_attr_write_buffer_kb);
+	if (retval) {
+		printk(KERN_ERR "comedi: failed to create sysfs attribute file \"%s\".\n",
+			dev_attr_write_buffer_kb.attr.name);
+		comedi_free_subdevice_minor(s);
+		return retval;
+	}
 	return i;
 }
 
@@ -2244,10 +2249,10 @@ void comedi_free_subdevice_minor(struct comedi_subdevice *s)
 	BUG_ON(s->minor >= COMEDI_NUM_MINORS);
 	BUG_ON(s->minor < COMEDI_FIRST_SUBDEVICE_MINOR);
 
-	comedi_spin_lock_irqsave(&comedi_file_info_table_lock, flags);
+	spin_lock_irqsave(&comedi_file_info_table_lock, flags);
 	info = comedi_file_info_table[s->minor];
 	comedi_file_info_table[s->minor] = NULL;
-	comedi_spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
+	spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
 
 	if (s->class_dev) {
 		device_destroy(comedi_class, MKDEV(COMEDI_MAJOR, s->minor));
@@ -2262,8 +2267,309 @@ struct comedi_device_file_info *comedi_get_device_file_info(unsigned minor)
 	struct comedi_device_file_info *info;
 
 	BUG_ON(minor >= COMEDI_NUM_MINORS);
-	comedi_spin_lock_irqsave(&comedi_file_info_table_lock, flags);
+	spin_lock_irqsave(&comedi_file_info_table_lock, flags);
 	info = comedi_file_info_table[minor];
-	comedi_spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
+	spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
 	return info;
 }
+
+static int resize_async_buffer(struct comedi_device *dev,
+			       struct comedi_subdevice *s,
+			       struct comedi_async *async, unsigned new_size)
+{
+	int retval;
+
+	if (new_size > async->max_bufsize)
+		return -EPERM;
+
+	if (s->busy) {
+		DPRINTK("subdevice is busy, cannot resize buffer\n");
+		return -EBUSY;
+	}
+	if (async->mmap_count) {
+		DPRINTK("subdevice is mmapped, cannot resize buffer\n");
+		return -EBUSY;
+	}
+
+	if (!async->prealloc_buf)
+		return -EINVAL;
+
+	/* make sure buffer is an integral number of pages
+		* (we round up) */
+	new_size = (new_size + PAGE_SIZE - 1) & PAGE_MASK;
+
+	retval = comedi_buf_alloc(dev, s, new_size);
+	if (retval < 0)
+		return retval;
+
+	if (s->buf_change) {
+		retval = s->buf_change(dev, s, new_size);
+		if (retval < 0)
+			return retval;
+	}
+
+	DPRINTK("comedi%i subd %d buffer resized to %i bytes\n",
+		dev->minor, s - dev->subdevices, async->prealloc_bufsz);
+	return 0;
+}
+
+/* sysfs attribute files */
+
+static const unsigned bytes_per_kibi = 1024;
+
+static ssize_t show_max_read_buffer_kb(struct device *dev,
+				       struct device_attribute *attr, char *buf)
+{
+	ssize_t retval;
+	struct comedi_device_file_info *info = dev_get_drvdata(dev);
+	unsigned max_buffer_size_kb = 0;
+	struct comedi_subdevice *const read_subdevice =
+					comedi_get_read_subdevice(info);
+
+	mutex_lock(&info->device->mutex);
+	if (read_subdevice &&
+	    (read_subdevice->subdev_flags & SDF_CMD_READ) &&
+	    read_subdevice->async) {
+		max_buffer_size_kb = read_subdevice->async->max_bufsize /
+					bytes_per_kibi;
+	}
+	retval =  snprintf(buf, PAGE_SIZE, "%i\n", max_buffer_size_kb);
+	mutex_unlock(&info->device->mutex);
+
+	return retval;
+}
+
+static ssize_t store_max_read_buffer_kb(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	struct comedi_device_file_info *info = dev_get_drvdata(dev);
+	unsigned long new_max_size_kb;
+	uint64_t new_max_size;
+	struct comedi_subdevice *const read_subdevice =
+					comedi_get_read_subdevice(info);
+
+	if (strict_strtoul(buf, 10, &new_max_size_kb))
+		return -EINVAL;
+	if (new_max_size_kb != (uint32_t)new_max_size_kb)
+		return -EINVAL;
+	new_max_size = ((uint64_t)new_max_size_kb) * bytes_per_kibi;
+	if (new_max_size != (uint32_t)new_max_size)
+		return -EINVAL;
+
+	mutex_lock(&info->device->mutex);
+	if (read_subdevice == NULL ||
+	    (read_subdevice->subdev_flags & SDF_CMD_READ) == 0 ||
+	    read_subdevice->async == NULL) {
+		mutex_unlock(&info->device->mutex);
+		return -EINVAL;
+	}
+	read_subdevice->async->max_bufsize = new_max_size;
+	mutex_unlock(&info->device->mutex);
+
+	return count;
+}
+
+static struct device_attribute dev_attr_max_read_buffer_kb = {
+	.attr = {
+			.name = "max_read_buffer_kb",
+			.mode = S_IRUGO | S_IWUSR
+		},
+	.show = &show_max_read_buffer_kb,
+	.store = &store_max_read_buffer_kb
+};
+
+static ssize_t show_read_buffer_kb(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	ssize_t retval;
+	struct comedi_device_file_info *info = dev_get_drvdata(dev);
+	unsigned buffer_size_kb = 0;
+	struct comedi_subdevice *const read_subdevice =
+					comedi_get_read_subdevice(info);
+
+	mutex_lock(&info->device->mutex);
+	if (read_subdevice &&
+		(read_subdevice->subdev_flags & SDF_CMD_READ) &&
+		read_subdevice->async) {
+		buffer_size_kb = read_subdevice->async->prealloc_bufsz /
+					bytes_per_kibi;
+	}
+	retval =  snprintf(buf, PAGE_SIZE, "%i\n", buffer_size_kb);
+	mutex_unlock(&info->device->mutex);
+
+	return retval;
+}
+
+static ssize_t store_read_buffer_kb(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+	struct comedi_device_file_info *info = dev_get_drvdata(dev);
+	unsigned long new_size_kb;
+	uint64_t new_size;
+	int retval;
+	struct comedi_subdevice *const read_subdevice =
+					comedi_get_read_subdevice(info);
+
+	if (strict_strtoul(buf, 10, &new_size_kb))
+		return -EINVAL;
+	if (new_size_kb != (uint32_t)new_size_kb)
+		return -EINVAL;
+	new_size = ((uint64_t)new_size_kb) * bytes_per_kibi;
+	if (new_size != (uint32_t)new_size)
+		return -EINVAL;
+
+	mutex_lock(&info->device->mutex);
+	if (read_subdevice == NULL ||
+	    (read_subdevice->subdev_flags & SDF_CMD_READ) == 0 ||
+	    read_subdevice->async == NULL) {
+		mutex_unlock(&info->device->mutex);
+		return -EINVAL;
+	}
+	retval = resize_async_buffer(info->device, read_subdevice,
+				     read_subdevice->async, new_size);
+	mutex_unlock(&info->device->mutex);
+
+	if (retval < 0)
+		return retval;
+	return count;
+}
+
+static struct device_attribute dev_attr_read_buffer_kb = {
+	.attr = {
+			.name = "read_buffer_kb",
+			.mode = S_IRUGO | S_IWUSR | S_IWGRP
+		},
+	.show = &show_read_buffer_kb,
+	.store = &store_read_buffer_kb
+};
+
+static ssize_t show_max_write_buffer_kb(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	ssize_t retval;
+	struct comedi_device_file_info *info = dev_get_drvdata(dev);
+	unsigned max_buffer_size_kb = 0;
+	struct comedi_subdevice *const write_subdevice =
+					comedi_get_write_subdevice(info);
+
+	mutex_lock(&info->device->mutex);
+	if (write_subdevice &&
+	    (write_subdevice->subdev_flags & SDF_CMD_WRITE) &&
+	    write_subdevice->async) {
+		max_buffer_size_kb = write_subdevice->async->max_bufsize /
+					bytes_per_kibi;
+	}
+	retval =  snprintf(buf, PAGE_SIZE, "%i\n", max_buffer_size_kb);
+	mutex_unlock(&info->device->mutex);
+
+	return retval;
+}
+
+static ssize_t store_max_write_buffer_kb(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t count)
+{
+	struct comedi_device_file_info *info = dev_get_drvdata(dev);
+	unsigned long new_max_size_kb;
+	uint64_t new_max_size;
+	struct comedi_subdevice *const write_subdevice =
+					comedi_get_write_subdevice(info);
+
+	if (strict_strtoul(buf, 10, &new_max_size_kb))
+		return -EINVAL;
+	if (new_max_size_kb != (uint32_t)new_max_size_kb)
+		return -EINVAL;
+	new_max_size = ((uint64_t)new_max_size_kb) * bytes_per_kibi;
+	if (new_max_size != (uint32_t)new_max_size)
+		return -EINVAL;
+
+	mutex_lock(&info->device->mutex);
+	if (write_subdevice == NULL ||
+	    (write_subdevice->subdev_flags & SDF_CMD_WRITE) == 0 ||
+	    write_subdevice->async == NULL) {
+		mutex_unlock(&info->device->mutex);
+		return -EINVAL;
+	}
+	write_subdevice->async->max_bufsize = new_max_size;
+	mutex_unlock(&info->device->mutex);
+
+	return count;
+}
+
+static struct device_attribute dev_attr_max_write_buffer_kb = {
+	.attr = {
+			.name = "max_write_buffer_kb",
+			.mode = S_IRUGO | S_IWUSR
+		},
+	.show = &show_max_write_buffer_kb,
+	.store = &store_max_write_buffer_kb
+};
+
+static ssize_t show_write_buffer_kb(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	ssize_t retval;
+	struct comedi_device_file_info *info = dev_get_drvdata(dev);
+	unsigned buffer_size_kb = 0;
+	struct comedi_subdevice *const write_subdevice =
+					comedi_get_write_subdevice(info);
+
+	mutex_lock(&info->device->mutex);
+	if (write_subdevice &&
+	    (write_subdevice->subdev_flags & SDF_CMD_WRITE) &&
+	    write_subdevice->async) {
+		buffer_size_kb = write_subdevice->async->prealloc_bufsz /
+					bytes_per_kibi;
+	}
+	retval =  snprintf(buf, PAGE_SIZE, "%i\n", buffer_size_kb);
+	mutex_unlock(&info->device->mutex);
+
+	return retval;
+}
+
+static ssize_t store_write_buffer_kb(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	struct comedi_device_file_info *info = dev_get_drvdata(dev);
+	unsigned long new_size_kb;
+	uint64_t new_size;
+	int retval;
+	struct comedi_subdevice *const write_subdevice =
+					comedi_get_write_subdevice(info);
+
+	if (strict_strtoul(buf, 10, &new_size_kb))
+		return -EINVAL;
+	if (new_size_kb != (uint32_t)new_size_kb)
+		return -EINVAL;
+	new_size = ((uint64_t)new_size_kb) * bytes_per_kibi;
+	if (new_size != (uint32_t)new_size)
+		return -EINVAL;
+
+	mutex_lock(&info->device->mutex);
+	if (write_subdevice == NULL ||
+	    (write_subdevice->subdev_flags & SDF_CMD_WRITE) == 0 ||
+	    write_subdevice->async == NULL) {
+		mutex_unlock(&info->device->mutex);
+		return -EINVAL;
+	}
+	retval = resize_async_buffer(info->device, write_subdevice,
+		write_subdevice->async, new_size);
+	mutex_unlock(&info->device->mutex);
+
+	if (retval < 0)
+		return retval;
+	return count;
+}
+
+static struct device_attribute dev_attr_write_buffer_kb = {
+	.attr = {
+			.name = "write_buffer_kb",
+			.mode = S_IRUGO | S_IWUSR | S_IWGRP
+		},
+	.show = &show_write_buffer_kb,
+	.store = &store_write_buffer_kb
+};
diff --git a/drivers/staging/comedi/comedi_ksyms.c b/drivers/staging/comedi/comedi_ksyms.c
index 6e6fb979ef5..a732e342dcd 100644
--- a/drivers/staging/comedi/comedi_ksyms.c
+++ b/drivers/staging/comedi/comedi_ksyms.c
@@ -46,13 +46,6 @@ EXPORT_SYMBOL(range_bipolar2_5);
 EXPORT_SYMBOL(range_unipolar10);
 EXPORT_SYMBOL(range_unipolar5);
 EXPORT_SYMBOL(range_unknown);
-#ifdef CONFIG_COMEDI_RT
-EXPORT_SYMBOL(comedi_free_irq);
-EXPORT_SYMBOL(comedi_request_irq);
-EXPORT_SYMBOL(comedi_switch_to_rt);
-EXPORT_SYMBOL(comedi_switch_to_non_rt);
-EXPORT_SYMBOL(rt_pend_call);
-#endif
 #ifdef CONFIG_COMEDI_DEBUG
 EXPORT_SYMBOL(comedi_debug);
 #endif
diff --git a/drivers/staging/comedi/comedi_rt.h b/drivers/staging/comedi/comedi_rt.h
deleted file mode 100644
index 169ca963312..00000000000
--- a/drivers/staging/comedi/comedi_rt.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
-    module/comedi_rt.h
-    header file for real-time structures, variables, and constants
-
-    COMEDI - Linux Control and Measurement Device Interface
-    Copyright (C) 1997-2000 David A. Schleef <ds@schleef.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#ifndef _COMEDI_RT_H
-#define _COMEDI_RT_H
-
-#ifndef _COMEDIDEV_H
-#error comedi_rt.h should only be included by comedidev.h
-#endif
-
-#include <linux/kdev_t.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-
-#ifdef CONFIG_COMEDI_RT
-
-#ifdef CONFIG_COMEDI_RTAI
-#include <rtai.h>
-#include <rtai_sched.h>
-#include <rtai_version.h>
-#endif
-#ifdef CONFIG_COMEDI_RTL
-#include <rtl_core.h>
-#include <rtl_time.h>
-/* #ifdef RTLINUX_VERSION_CODE */
-#include <rtl_sync.h>
-/* #endif */
-#define rt_printk rtl_printf
-#endif
-#ifdef CONFIG_COMEDI_FUSION
-#define rt_printk(format, args...) printk(format , ## args)
-#endif /* CONFIG_COMEDI_FUSION */
-#ifdef CONFIG_PRIORITY_IRQ
-#define rt_printk printk
-#endif
-
-int comedi_request_irq(unsigned int irq, irqreturn_t(*handler) (int,
-		void *PT_REGS_ARG), unsigned long flags, const char *device,
-		struct comedi_device *dev_id);
-void comedi_free_irq(unsigned int irq, struct comedi_device *dev_id);
-void comedi_rt_init(void);
-void comedi_rt_cleanup(void);
-int comedi_switch_to_rt(struct comedi_device *dev);
-void comedi_switch_to_non_rt(struct comedi_device *dev);
-void comedi_rt_pend_wakeup(wait_queue_head_t *q);
-extern int rt_pend_call(void (*func) (int arg1, void *arg2), int arg1,
-	void *arg2);
-
-#else
-
-#define comedi_request_irq(a, b, c, d, e) request_irq(a, b, c, d, e)
-#define comedi_free_irq(a, b) free_irq(a, b)
-#define comedi_rt_init() do {} while (0)
-#define comedi_rt_cleanup() do {} while (0)
-#define comedi_switch_to_rt(a) (-1)
-#define comedi_switch_to_non_rt(a) do {} while (0)
-#define comedi_rt_pend_wakeup(a) do {} while (0)
-
-#define rt_printk(format, args...)	printk(format, ##args)
-
-#endif
-
-/* Define a spin_lock_irqsave function that will work with rt or without.
- * Use inline functions instead of just macros to enforce some type checking.
- */
-#define comedi_spin_lock_irqsave(lock_ptr, flags) \
-	(flags = __comedi_spin_lock_irqsave(lock_ptr))
-
-static inline unsigned long __comedi_spin_lock_irqsave(spinlock_t *lock_ptr)
-{
-	unsigned long flags;
-
-#if defined(CONFIG_COMEDI_RTAI)
-	flags = rt_spin_lock_irqsave(lock_ptr);
-
-#elif defined(CONFIG_COMEDI_RTL)
-	rtl_spin_lock_irqsave(lock_ptr, flags);
-
-#elif defined(CONFIG_COMEDI_RTL_V1)
-	rtl_spin_lock_irqsave(lock_ptr, flags);
-
-#elif defined(CONFIG_COMEDI_FUSION)
-	rthal_spin_lock_irqsave(lock_ptr, flags);
-#else
-	spin_lock_irqsave(lock_ptr, flags);
-
-#endif
-
-	return flags;
-}
-
-static inline void comedi_spin_unlock_irqrestore(spinlock_t *lock_ptr,
-	unsigned long flags)
-{
-
-#if defined(CONFIG_COMEDI_RTAI)
-	rt_spin_unlock_irqrestore(flags, lock_ptr);
-
-#elif defined(CONFIG_COMEDI_RTL)
-	rtl_spin_unlock_irqrestore(lock_ptr, flags);
-
-#elif defined(CONFIG_COMEDI_RTL_V1)
-	rtl_spin_unlock_irqrestore(lock_ptr, flags);
-#elif defined(CONFIG_COMEDI_FUSION)
-	rthal_spin_unlock_irqrestore(lock_ptr, flags);
-#else
-	spin_unlock_irqrestore(lock_ptr, flags);
-
-#endif
-
-}
-
-/* define a RT safe udelay */
-static inline void comedi_udelay(unsigned int usec)
-{
-#if defined(CONFIG_COMEDI_RTAI)
-	static const int nanosec_per_usec = 1000;
-	rt_busy_sleep(usec * nanosec_per_usec);
-#elif defined(CONFIG_COMEDI_RTL)
-	static const int nanosec_per_usec = 1000;
-	rtl_delay(usec * nanosec_per_usec);
-#else
-	udelay(usec);
-#endif
-}
-
-#endif
diff --git a/drivers/staging/comedi/comedidev.h b/drivers/staging/comedi/comedidev.h
index ea319360ae6..89af44a788d 100644
--- a/drivers/staging/comedi/comedidev.h
+++ b/drivers/staging/comedi/comedidev.h
@@ -28,6 +28,7 @@
 #include <linux/module.h>
 #include <linux/kdev_t.h>
 #include <linux/slab.h>
+#include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
@@ -35,10 +36,10 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/vmalloc.h>
-#include "interrupt.h"
 #include <linux/dma-mapping.h>
 #include <linux/uaccess.h>
 #include <linux/io.h>
+#include <linux/timer.h>
 
 #include "comedi.h"
 
@@ -264,7 +265,6 @@ struct comedi_device {
 	const char *board_name;
 	const void *board_ptr;
 	int attached;
-	int rt;
 	spinlock_t spinlock;
 	struct mutex mutex;
 	int in_request_module;
@@ -524,6 +524,17 @@ struct usb_device;	/* forward declaration */
 int comedi_usb_auto_config(struct usb_device *usbdev, const char *board_name);
 void comedi_usb_auto_unconfig(struct usb_device *usbdev);
 
-#include "comedi_rt.h"
+#ifdef CONFIG_COMEDI_PCI_DRIVERS
+	#define CONFIG_COMEDI_PCI
+#endif
+#ifdef CONFIG_COMEDI_PCI_DRIVERS_MODULE
+	#define CONFIG_COMEDI_PCI
+#endif
+#ifdef CONFIG_COMEDI_PCMCIA_DRIVERS
+	#define CONFIG_COMEDI_PCMCIA
+#endif
+#ifdef CONFIG_COMEDI_PCMCIA_DRIVERS_MODULE
+	#define CONFIG_COMEDI_PCMCIA
+#endif
 
 #endif /* _COMEDIDEV_H */
diff --git a/drivers/staging/comedi/drivers.c b/drivers/staging/comedi/drivers.c
index 6e13e450dc7..42a02571ff1 100644
--- a/drivers/staging/comedi/drivers.c
+++ b/drivers/staging/comedi/drivers.c
@@ -198,7 +198,7 @@ int comedi_driver_unregister(struct comedi_driver *driver)
 		struct comedi_device_file_info *dev_file_info = comedi_get_device_file_info(i);
 		struct comedi_device *dev;
 
-		if(dev_file_info == NULL) continue;
+		if (dev_file_info == NULL) continue;
 		dev = dev_file_info->device;
 
 		mutex_lock(&dev->mutex);
@@ -554,7 +554,7 @@ unsigned int comedi_buf_munge(struct comedi_async *async, unsigned int num_bytes
 
 		block_size = num_bytes - count;
 		if (block_size < 0) {
-			rt_printk("%s: %s: bug! block_size is negative\n",
+			printk("%s: %s: bug! block_size is negative\n",
 				__FILE__, __func__);
 			break;
 		}
@@ -633,8 +633,7 @@ unsigned comedi_buf_write_free(struct comedi_async *async, unsigned int nbytes)
 {
 	if ((int)(async->buf_write_count + nbytes -
 			async->buf_write_alloc_count) > 0) {
-		rt_printk
-			("comedi: attempted to write-free more bytes than have been write-allocated.\n");
+		printk("comedi: attempted to write-free more bytes than have been write-allocated.\n");
 		nbytes = async->buf_write_alloc_count - async->buf_write_count;
 	}
 	async->buf_write_count += nbytes;
@@ -667,8 +666,7 @@ unsigned comedi_buf_read_free(struct comedi_async *async, unsigned int nbytes)
 	smp_mb();
 	if ((int)(async->buf_read_count + nbytes -
 			async->buf_read_alloc_count) > 0) {
-		rt_printk
-			("comedi: attempted to read-free more bytes than have been read-allocated.\n");
+		printk("comedi: attempted to read-free more bytes than have been read-allocated.\n");
 		nbytes = async->buf_read_alloc_count - async->buf_read_count;
 	}
 	async->buf_read_count += nbytes;
@@ -801,7 +799,7 @@ int comedi_auto_config(struct device *hardware_device, const char *board_name, c
 	}
 
 	minor = comedi_alloc_board_minor(hardware_device);
-	if(minor < 0) return minor;
+	if (minor < 0) return minor;
 
 	private_data = kmalloc(sizeof(unsigned), GFP_KERNEL);
 	if (private_data == NULL) {
@@ -824,7 +822,7 @@ int comedi_auto_config(struct device *hardware_device, const char *board_name, c
 	mutex_unlock(&dev_file_info->device->mutex);
 
 cleanup:
-	if(retval < 0)
+	if (retval < 0)
 	{
 		kfree(private_data);
 		comedi_free_board_minor(minor);
@@ -835,7 +833,7 @@ cleanup:
 void comedi_auto_unconfig(struct device *hardware_device)
 {
 	unsigned *minor = (unsigned *)dev_get_drvdata(hardware_device);
-	if(minor == NULL) return;
+	if (minor == NULL) return;
 
 	BUG_ON(*minor >= COMEDI_NUM_BOARD_MINORS);
 
@@ -853,7 +851,8 @@ int comedi_pci_auto_config(struct pci_dev *pcidev, const char *board_name)
 	/*  pci slot */
 	options[1] = PCI_SLOT(pcidev->devfn);
 
-	return comedi_auto_config(&pcidev->dev, board_name, options, sizeof(options) / sizeof(options[0]));
+	return comedi_auto_config(&pcidev->dev, board_name,
+				  options, ARRAY_SIZE(options));
 }
 
 void comedi_pci_auto_unconfig(struct pci_dev *pcidev)
diff --git a/drivers/staging/comedi/drivers/8253.h b/drivers/staging/comedi/drivers/8253.h
index 08a11a5a16e..ad467ac290a 100644
--- a/drivers/staging/comedi/drivers/8253.h
+++ b/drivers/staging/comedi/drivers/8253.h
@@ -24,11 +24,7 @@
 #ifndef _8253_H
 #define _8253_H
 
-#ifndef CMDTEST
-#include "../comedi.h"
-#else
 #include "../comedi.h"
-#endif
 
 #define i8253_cascade_ns_to_timer i8253_cascade_ns_to_timer_2div
 
@@ -205,7 +201,7 @@ static inline void i8253_cascade_ns_to_timer_2div(int i8253_osc_base,
 	}
 
 	*nanosec = div1 * div2 * i8253_osc_base;
-	*d1 = div1 & 0xffff;	// masking is done since counter maps zero to 0x10000
+	*d1 = div1 & 0xffff;	/*  masking is done since counter maps zero to 0x10000 */
 	*d2 = div2 & 0xffff;
 	return;
 }
@@ -247,12 +243,12 @@ static inline int i8254_load(unsigned long base_address, unsigned int regshift,
 		return -1;
 
 	byte = counter_number << 6;
-	byte |= 0x30;		// load low then high byte
-	byte |= (mode << 1);	// set counter mode
+	byte |= 0x30;		/*  load low then high byte */
+	byte |= (mode << 1);	/*  set counter mode */
 	outb(byte, base_address + (i8254_control_reg << regshift));
-	byte = count & 0xff;	// lsb of counter value
+	byte = count & 0xff;	/*  lsb of counter value */
 	outb(byte, base_address + (counter_number << regshift));
-	byte = (count >> 8) & 0xff;	// msb of counter value
+	byte = (count >> 8) & 0xff;	/*  msb of counter value */
 	outb(byte, base_address + (counter_number << regshift));
 
 	return 0;
@@ -273,12 +269,12 @@ static inline int i8254_mm_load(void *base_address, unsigned int regshift,
 		return -1;
 
 	byte = counter_number << 6;
-	byte |= 0x30;		// load low then high byte
-	byte |= (mode << 1);	// set counter mode
+	byte |= 0x30;		/*  load low then high byte */
+	byte |= (mode << 1);	/*  set counter mode */
 	writeb(byte, base_address + (i8254_control_reg << regshift));
-	byte = count & 0xff;	// lsb of counter value
+	byte = count & 0xff;	/*  lsb of counter value */
 	writeb(byte, base_address + (counter_number << regshift));
-	byte = (count >> 8) & 0xff;	// msb of counter value
+	byte = (count >> 8) & 0xff;	/*  msb of counter value */
 	writeb(byte, base_address + (counter_number << regshift));
 
 	return 0;
@@ -294,13 +290,13 @@ static inline int i8254_read(unsigned long base_address, unsigned int regshift,
 	if (counter_number > 2)
 		return -1;
 
-	// latch counter
+	/*  latch counter */
 	byte = counter_number << 6;
 	outb(byte, base_address + (i8254_control_reg << regshift));
 
-	// read lsb
+	/*  read lsb */
 	ret = inb(base_address + (counter_number << regshift));
-	// read msb
+	/*  read msb */
 	ret += inb(base_address + (counter_number << regshift)) << 8;
 
 	return ret;
@@ -315,13 +311,13 @@ static inline int i8254_mm_read(void *base_address, unsigned int regshift,
 	if (counter_number > 2)
 		return -1;
 
-	// latch counter
+	/*  latch counter */
 	byte = counter_number << 6;
 	writeb(byte, base_address + (i8254_control_reg << regshift));
 
-	// read lsb
+	/*  read lsb */
 	ret = readb(base_address + (counter_number << regshift));
-	// read msb
+	/*  read msb */
 	ret += readb(base_address + (counter_number << regshift)) << 8;
 
 	return ret;
@@ -336,9 +332,9 @@ static inline void i8254_write(unsigned long base_address,
 	if (counter_number > 2)
 		return;
 
-	byte = count & 0xff;	// lsb of counter value
+	byte = count & 0xff;	/*  lsb of counter value */
 	outb(byte, base_address + (counter_number << regshift));
-	byte = (count >> 8) & 0xff;	// msb of counter value
+	byte = (count >> 8) & 0xff;	/*  msb of counter value */
 	outb(byte, base_address + (counter_number << regshift));
 }
 
@@ -350,9 +346,9 @@ static inline void i8254_mm_write(void *base_address,
 	if (counter_number > 2)
 		return;
 
-	byte = count & 0xff;	// lsb of counter value
+	byte = count & 0xff;	/*  lsb of counter value */
 	writeb(byte, base_address + (counter_number << regshift));
-	byte = (count >> 8) & 0xff;	// msb of counter value
+	byte = (count >> 8) & 0xff;	/*  msb of counter value */
 	writeb(byte, base_address + (counter_number << regshift));
 }
 
@@ -374,8 +370,8 @@ static inline int i8254_set_mode(unsigned long base_address,
 		return -1;
 
 	byte = counter_number << 6;
-	byte |= 0x30;		// load low then high byte
-	byte |= mode;		// set counter mode and BCD|binary
+	byte |= 0x30;		/*  load low then high byte */
+	byte |= mode;		/*  set counter mode and BCD|binary */
 	outb(byte, base_address + (i8254_control_reg << regshift));
 
 	return 0;
@@ -392,8 +388,8 @@ static inline int i8254_mm_set_mode(void *base_address,
 		return -1;
 
 	byte = counter_number << 6;
-	byte |= 0x30;		// load low then high byte
-	byte |= mode;		// set counter mode and BCD|binary
+	byte |= 0x30;		/*  load low then high byte */
+	byte |= mode;		/*  set counter mode and BCD|binary */
 	writeb(byte, base_address + (i8254_control_reg << regshift));
 
 	return 0;
diff --git a/drivers/staging/comedi/drivers/8255.c b/drivers/staging/comedi/drivers/8255.c
index 0369c7c84ac..bdc3957bceb 100644
--- a/drivers/staging/comedi/drivers/8255.c
+++ b/drivers/staging/comedi/drivers/8255.c
@@ -108,10 +108,10 @@ struct subdev_8255_struct {
 static int dev_8255_attach(struct comedi_device *dev, struct comedi_devconfig * it);
 static int dev_8255_detach(struct comedi_device *dev);
 static struct comedi_driver driver_8255 = {
-      driver_name:"8255",
-      module:THIS_MODULE,
-      attach:dev_8255_attach,
-      detach:dev_8255_detach,
+	.driver_name = "8255",
+	.module = THIS_MODULE,
+	.attach = dev_8255_attach,
+	.detach = dev_8255_detach,
 };
 
 COMEDI_INITCLEANUP(driver_8255);
@@ -144,7 +144,7 @@ static int subdev_8255_cb(int dir, int port, int data, unsigned long arg)
 }
 
 static int subdev_8255_insn(struct comedi_device *dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (data[0]) {
 		s->state &= ~data[0];
@@ -169,7 +169,7 @@ static int subdev_8255_insn(struct comedi_device *dev, struct comedi_subdevice *
 }
 
 static int subdev_8255_insn_config(struct comedi_device *dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int mask;
 	unsigned int bits;
@@ -223,7 +223,7 @@ static void do_config(struct comedi_device *dev, struct comedi_subdevice * s)
 }
 
 static int subdev_8255_cmdtest(struct comedi_device *dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	unsigned int tmp;
@@ -361,8 +361,10 @@ int subdev_8255_init_irq(struct comedi_device *dev, struct comedi_subdevice * s,
 void subdev_8255_cleanup(struct comedi_device *dev, struct comedi_subdevice * s)
 {
 	if (s->private) {
-		if (subdevpriv->have_irq) {
-		}
+		/* this test does nothing, so comment it out
+		 * if (subdevpriv->have_irq) {
+		 * }
+		 */
 
 		kfree(s->private);
 	}
@@ -394,7 +396,8 @@ static int dev_8255_attach(struct comedi_device *dev, struct comedi_devconfig *
 		return -EINVAL;
 	}
 
-	if ((ret = alloc_subdevices(dev, i)) < 0)
+	ret = alloc_subdevices(dev, i);
+	if (ret < 0)
 		return ret;
 
 	for (i = 0; i < dev->n_subdevices; i++) {
diff --git a/drivers/staging/comedi/drivers/8255.h b/drivers/staging/comedi/drivers/8255.h
index 979311b9927..5457c6b2d22 100644
--- a/drivers/staging/comedi/drivers/8255.h
+++ b/drivers/staging/comedi/drivers/8255.h
@@ -28,16 +28,16 @@
 
 #if defined(CONFIG_COMEDI_8255) || defined(CONFIG_COMEDI_8255_MODULE)
 
-int subdev_8255_init(struct comedi_device * dev, struct comedi_subdevice * s,
+int subdev_8255_init(struct comedi_device *dev, struct comedi_subdevice *s,
 	int (*cb) (int, int, int, unsigned long), unsigned long arg);
-int subdev_8255_init_irq(struct comedi_device * dev, struct comedi_subdevice * s,
+int subdev_8255_init_irq(struct comedi_device *dev, struct comedi_subdevice *s,
 	int (*cb) (int, int, int, unsigned long), unsigned long arg);
-void subdev_8255_cleanup(struct comedi_device * dev, struct comedi_subdevice * s);
-void subdev_8255_interrupt(struct comedi_device * dev, struct comedi_subdevice * s);
+void subdev_8255_cleanup(struct comedi_device *dev, struct comedi_subdevice *s);
+void subdev_8255_interrupt(struct comedi_device *dev, struct comedi_subdevice *s);
 
 #else
 
-static inline int subdev_8255_init(struct comedi_device * dev, struct comedi_subdevice * s,
+static inline int subdev_8255_init(struct comedi_device *dev, struct comedi_subdevice *s,
 	void *x, unsigned long y)
 {
 	printk("8255 support not configured -- disabling subdevice\n");
@@ -47,8 +47,8 @@ static inline int subdev_8255_init(struct comedi_device * dev, struct comedi_sub
 	return 0;
 }
 
-static inline void subdev_8255_cleanup(struct comedi_device * dev,
-	struct comedi_subdevice * s)
+static inline void subdev_8255_cleanup(struct comedi_device *dev,
+	struct comedi_subdevice *s)
 {
 }
 
diff --git a/drivers/staging/comedi/drivers/Makefile b/drivers/staging/comedi/drivers/Makefile
index 12d6e4312f3..df2854d543c 100644
--- a/drivers/staging/comedi/drivers/Makefile
+++ b/drivers/staging/comedi/drivers/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_COMEDI)			+= comedi_fc.o
 obj-$(CONFIG_COMEDI)			+= comedi_bond.o
 obj-$(CONFIG_COMEDI)			+= comedi_test.o
 obj-$(CONFIG_COMEDI)			+= comedi_parport.o
+obj-$(CONFIG_COMEDI)			+= pcm_common.o
 
 # Comedi PCI drivers
 obj-$(CONFIG_COMEDI_PCI_DRIVERS)	+= 8255.o
@@ -125,6 +126,8 @@ obj-$(CONFIG_COMEDI_PCMCIA_DRIVERS)	+= ni_mio_cs.o
 obj-$(CONFIG_COMEDI_PCMCIA_DRIVERS)	+= quatech_daqp_cs.o
 
 # Comedi USB drivers
+obj-$(CONFIG_COMEDI_USB_DRIVERS)	+= dt9812.o
 obj-$(CONFIG_COMEDI_USB_DRIVERS)	+= usbdux.o
 obj-$(CONFIG_COMEDI_USB_DRIVERS)	+= usbduxfast.o
-obj-$(CONFIG_COMEDI_USB_DRIVERS)	+= dt9812.o
+obj-$(CONFIG_COMEDI_USB_DRIVERS)	+= vmk80xx.o
+
diff --git a/drivers/staging/comedi/drivers/acl7225b.c b/drivers/staging/comedi/drivers/acl7225b.c
index b21320f0959..5b986aa7398 100644
--- a/drivers/staging/comedi/drivers/acl7225b.c
+++ b/drivers/staging/comedi/drivers/acl7225b.c
@@ -26,8 +26,8 @@ static int acl7225b_attach(struct comedi_device *dev, struct comedi_devconfig *
 static int acl7225b_detach(struct comedi_device *dev);
 
 struct boardtype {
-	const char *name;	// driver name
-	int io_range;		// len of I/O space
+	const char *name;	/*  driver name */
+	int io_range;		/*  len of I/O space */
 };
 
 static const struct boardtype boardtypes[] = {
@@ -39,19 +39,19 @@ static const struct boardtype boardtypes[] = {
 #define this_board ((const struct boardtype *)dev->board_ptr)
 
 static struct comedi_driver driver_acl7225b = {
-      driver_name:"acl7225b",
-      module:THIS_MODULE,
-      attach:acl7225b_attach,
-      detach:acl7225b_detach,
-      board_name:&boardtypes[0].name,
-      num_names:n_boardtypes,
-      offset:sizeof(struct boardtype),
+	.driver_name = "acl7225b",
+	.module = THIS_MODULE,
+	.attach = acl7225b_attach,
+	.detach = acl7225b_detach,
+	.board_name = &boardtypes[0].name,
+	.num_names = n_boardtypes,
+	.offset = sizeof(struct boardtype),
 };
 
 COMEDI_INITCLEANUP(driver_acl7225b);
 
 static int acl7225b_do_insn(struct comedi_device *dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -72,7 +72,7 @@ static int acl7225b_do_insn(struct comedi_device *dev, struct comedi_subdevice *
 }
 
 static int acl7225b_di_insn(struct comedi_device *dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c
index c96aee09e1b..60213d292a5 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c
@@ -23,16 +23,16 @@
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_     i_APCI1710_InitTimer                         |
-|                               (BYTE_   b_BoardHandle,                      |
-|                                BYTE_   b_ModulNbr,                         |
-|                                BYTE_   b_TimerNbr,                         |
-|                                BYTE_   b_TimerMode,                        |
+|                               (unsigned char_   b_BoardHandle,                      |
+|                                unsigned char_   b_ModulNbr,                         |
+|                                unsigned char_   b_TimerNbr,                         |
+|                                unsigned char_   b_TimerMode,                        |
 |                                ULONG_ ul_ReloadValue,                      |
-|                                BYTE_   b_InputClockSelection,              |
-|                                BYTE_   b_InputClockLevel,                  |
-|                                BYTE_   b_OutputLevel,                      |
-|                                BYTE_   b_HardwareGateLevel)
-INT i_InsnConfig_InitTimer(struct comedi_device *dev,struct comedi_subdevice *s,
+|                                unsigned char_   b_InputClockSelection,              |
+|                                unsigned char_   b_InputClockLevel,                  |
+|                                unsigned char_   b_OutputLevel,                      |
+|                                unsigned char_   b_HardwareGateLevel)
+int i_InsnConfig_InitTimer(struct comedi_device *dev,struct comedi_subdevice *s,
 	struct comedi_insn *insn,unsigned int *data)
 |
 +----------------------------------------------------------------------------+
@@ -148,13 +148,13 @@ INT i_InsnConfig_InitTimer(struct comedi_device *dev,struct comedi_subdevice *s,
 |  +--------------------------------+------------------------------------+   |
 |                                                                            |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_   b_BoardHandle        : Handle of board         |
+| Input Parameters  : unsigned char_   b_BoardHandle        : Handle of board         |
 |                                                    APCI-1710               |
-|                     BYTE_   b_ModulNbr           : Module number to        |
+|                     unsigned char_   b_ModulNbr           : Module number to        |
 |                                                    configure (0 to 3)      |
-|                     BYTE_   b_TimerNbr           : Timer number to         |
+|                     unsigned char_   b_TimerNbr           : Timer number to         |
 |                                                    configure (0 to 2)      |
-|                     BYTE_   b_TimerMode          : Timer mode selection    |
+|                     unsigned char_   b_TimerMode          : Timer mode selection    |
 |                                                    (0 to 5)                |
 |                                                    0: Interrupt on terminal|
 |                                                       count                |
@@ -173,21 +173,21 @@ INT i_InsnConfig_InitTimer(struct comedi_device *dev,struct comedi_subdevice *s,
 |                                                     or division factor     |
 |                                                     See timer mode         |
 |                                                     description table.     |
-|                     BYTE_   b_InputClockSelection : Selection from input   |
+|                     unsigned char_   b_InputClockSelection : Selection from input   |
 |                                                     timer clock.           |
 |                                                     See input clock        |
 |                                                     selection table.       |
-|                     BYTE_   b_InputClockLevel     : Selection from input   |
+|                     unsigned char_   b_InputClockLevel     : Selection from input   |
 |                                                     clock level.           |
 |                                                     0 : Low active         |
 |                                                         (Input inverted)   |
 |                                                     1 : High active        |
-|                     BYTE_   b_OutputLevel,        : Selection from output  |
+|                     unsigned char_   b_OutputLevel,        : Selection from output  |
 |                                                     clock level.           |
 |                                                     0 : Low active         |
 |                                                     1 : High active        |
 |                                                         (Output inverted)  |
-|                     BYTE_   b_HardwareGateLevel   : Selection from         |
+|                     unsigned char_   b_HardwareGateLevel   : Selection from         |
 |                                                     hardware gate level.   |
 |                                                     0 : Low active         |
 |                                                         (Input inverted)   |
@@ -195,14 +195,14 @@ INT i_InsnConfig_InitTimer(struct comedi_device *dev,struct comedi_subdevice *s,
 |                                                     If you will not used   |
 |                                                     the hardware gate set  |
 |                                                     this value to 0.
-|b_ModulNbr        = (BYTE) CR_AREF(insn->chanspec);
-	b_TimerNbr		  = (BYTE) CR_CHAN(insn->chanspec);
-	b_TimerMode		  = (BYTE) data[0];
-	ul_ReloadValue	  = (ULONG) data[1];
-	b_InputClockSelection	=(BYTE) data[2];
-	b_InputClockLevel		=(BYTE) data[3];
-	b_OutputLevel			=(BYTE) data[4];
-	b_HardwareGateLevel		=(BYTE) data[5];
+|b_ModulNbr        = (unsigned char) CR_AREF(insn->chanspec);
+	b_TimerNbr		  = (unsigned char) CR_CHAN(insn->chanspec);
+	b_TimerMode		  = (unsigned char) data[0];
+	ul_ReloadValue	  = (unsigned int) data[1];
+	b_InputClockSelection	=(unsigned char) data[2];
+	b_InputClockLevel		=(unsigned char) data[3];
+	b_OutputLevel			=(unsigned char) data[4];
+	b_HardwareGateLevel		=(unsigned char) data[5];
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
 +----------------------------------------------------------------------------+
@@ -219,33 +219,33 @@ INT i_InsnConfig_InitTimer(struct comedi_device *dev,struct comedi_subdevice *s,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InsnConfigInitTimer(struct comedi_device * dev, struct comedi_subdevice * s,
-				   struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnConfigInitTimer(struct comedi_device *dev, struct comedi_subdevice *s,
+				   struct comedi_insn *insn, unsigned int *data)
 {
 
-	INT i_ReturnValue = 0;
-	BYTE b_ModulNbr;
-	BYTE b_TimerNbr;
-	BYTE b_TimerMode;
-	ULONG ul_ReloadValue;
-	BYTE b_InputClockSelection;
-	BYTE b_InputClockLevel;
-	BYTE b_OutputLevel;
-	BYTE b_HardwareGateLevel;
+	int i_ReturnValue = 0;
+	unsigned char b_ModulNbr;
+	unsigned char b_TimerNbr;
+	unsigned char b_TimerMode;
+	unsigned int ul_ReloadValue;
+	unsigned char b_InputClockSelection;
+	unsigned char b_InputClockLevel;
+	unsigned char b_OutputLevel;
+	unsigned char b_HardwareGateLevel;
 
-	//BEGIN JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz
-	DWORD dw_Test = 0;
-	//END JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz
+	/* BEGIN JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz */
+	unsigned int dw_Test = 0;
+	/* END JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz */
 
 	i_ReturnValue = insn->n;
-	b_ModulNbr = (BYTE) CR_AREF(insn->chanspec);
-	b_TimerNbr = (BYTE) CR_CHAN(insn->chanspec);
-	b_TimerMode = (BYTE) data[0];
-	ul_ReloadValue = (ULONG) data[1];
-	b_InputClockSelection = (BYTE) data[2];
-	b_InputClockLevel = (BYTE) data[3];
-	b_OutputLevel = (BYTE) data[4];
-	b_HardwareGateLevel = (BYTE) data[5];
+	b_ModulNbr = (unsigned char) CR_AREF(insn->chanspec);
+	b_TimerNbr = (unsigned char) CR_CHAN(insn->chanspec);
+	b_TimerMode = (unsigned char) data[0];
+	ul_ReloadValue = (unsigned int) data[1];
+	b_InputClockSelection = (unsigned char) data[2];
+	b_InputClockLevel = (unsigned char) data[3];
+	b_OutputLevel = (unsigned char) data[4];
+	b_HardwareGateLevel = (unsigned char) data[5];
 
 	/* Test the module number */
 	if (b_ModulNbr < 4) {
@@ -256,7 +256,7 @@ INT i_APCI1710_InsnConfigInitTimer(struct comedi_device * dev, struct comedi_sub
 			if (b_TimerNbr <= 2) {
 				/* Test the timer mode */
 				if (b_TimerMode <= 5) {
-					//BEGIN JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz
+					/* BEGIN JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz */
 					/* Test te imput clock selection */
 					/*
 					   if (((b_TimerNbr == 0) && (b_InputClockSelection == 0)) ||
@@ -271,11 +271,11 @@ INT i_APCI1710_InsnConfigInitTimer(struct comedi_device * dev, struct comedi_sub
 					     ((b_InputClockSelection == APCI1710_PCI_BUS_CLOCK) ||
 					      (b_InputClockSelection == APCI1710_FRONT_CONNECTOR_INPUT) ||
 					      (b_InputClockSelection == APCI1710_10MHZ)))) {
-						//BEGIN JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz
+						/* BEGIN JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz */
 						if (((b_InputClockSelection == APCI1710_10MHZ) &&
 						     ((devpriv->s_BoardInfos.dw_MolduleConfiguration[b_ModulNbr] & 0x0000FFFFUL) >= 0x3131)) ||
 						     (b_InputClockSelection != APCI1710_10MHZ)) {
-							//END JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz
+							/* END JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz */
 							/* Test the input clock level selection */
 
 							if ((b_InputClockLevel == 0) ||
@@ -284,7 +284,7 @@ INT i_APCI1710_InsnConfigInitTimer(struct comedi_device * dev, struct comedi_sub
 								if ((b_OutputLevel == 0) || (b_OutputLevel == 1)) {
 									/* Test the hardware gate level selection */
 									if ((b_HardwareGateLevel == 0) || (b_HardwareGateLevel == 1)) {
-										//BEGIN JK 27.10.03 : Add the possibility to use a 40 Mhz quartz
+										/* BEGIN JK 27.10.03 : Add the possibility to use a 40 Mhz quartz */
 										/* Test if version > 1.1 and clock selection = 10MHz */
 										if ((b_InputClockSelection == APCI1710_10MHZ) && ((devpriv->s_BoardInfos.dw_MolduleConfiguration[b_ModulNbr] & 0x0000FFFFUL) > 0x3131)) {
 											/* Test if 40MHz quartz on board */
@@ -297,7 +297,7 @@ INT i_APCI1710_InsnConfigInitTimer(struct comedi_device * dev, struct comedi_sub
 
 										/* Test if detection OK */
 										if (dw_Test == 1) {
-											//END JK 27.10.03 : Add the possibility to use a 40 Mhz quartz
+											/* END JK 27.10.03 : Add the possibility to use a 40 Mhz quartz */
 											/* Initialisation OK */
 											devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].b_82X54Init = 1;
 
@@ -314,12 +314,12 @@ INT i_APCI1710_InsnConfigInitTimer(struct comedi_device * dev, struct comedi_sub
 											devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].b_HardwareGateLevel = b_HardwareGateLevel;
 
 											/* Set the configuration word and disable the timer */
-											//BEGIN JK 27.10.03 : Add the possibility to use a 40 Mhz quartz
+											/* BEGIN JK 27.10.03 : Add the possibility to use a 40 Mhz quartz */
 											/*
 											   devpriv->s_ModuleInfo [b_ModulNbr].
 											   s_82X54ModuleInfo.
 											   s_82X54TimerInfo  [b_TimerNbr].
-											   dw_ConfigurationWord = (DWORD) (((b_HardwareGateLevel         << 0) & 0x1) |
+											   dw_ConfigurationWord = (unsigned int) (((b_HardwareGateLevel         << 0) & 0x1) |
 											   ((b_InputClockLevel           << 1) & 0x2) |
 											   (((~b_OutputLevel       & 1)  << 2) & 0x4) |
 											   ((b_InputClockSelection       << 4) & 0x10));
@@ -329,40 +329,40 @@ INT i_APCI1710_InsnConfigInitTimer(struct comedi_device * dev, struct comedi_sub
 												b_InputClockSelection = 2;
 											}
 
-											devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord = (DWORD)(((b_HardwareGateLevel << 0) & 0x1) | ((b_InputClockLevel << 1) & 0x2) | (((~b_OutputLevel & 1) << 2) & 0x4) | ((b_InputClockSelection << 4) & 0x30));
-											//END JK 27.10.03 : Add the possibility to use a 40 Mhz quartz
+											devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord = (unsigned int)(((b_HardwareGateLevel << 0) & 0x1) | ((b_InputClockLevel << 1) & 0x2) | (((~b_OutputLevel & 1) << 2) & 0x4) | ((b_InputClockSelection << 4) & 0x30));
+											/* END JK 27.10.03 : Add the possibility to use a 40 Mhz quartz */
 											outl(devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord, devpriv->s_BoardInfos.ui_Address + 32 + (b_TimerNbr * 4) + (64 * b_ModulNbr));
 
 											/* Initialise the 82X54 Timer */
-											outl((DWORD) b_TimerMode, devpriv->s_BoardInfos.ui_Address + 16 + (b_TimerNbr * 4) + (64 * b_ModulNbr));
+											outl((unsigned int) b_TimerMode, devpriv->s_BoardInfos.ui_Address + 16 + (b_TimerNbr * 4) + (64 * b_ModulNbr));
 
 											/* Write the reload value */
 											outl(ul_ReloadValue, devpriv->s_BoardInfos.ui_Address + 0 + (b_TimerNbr * 4) + (64 * b_ModulNbr));
-											//BEGIN JK 27.10.03 : Add the possibility to use a 40 Mhz quartz
-										}	// if (dw_Test == 1)
+											/* BEGIN JK 27.10.03 : Add the possibility to use a 40 Mhz quartz */
+										}	/*  if (dw_Test == 1) */
 										else {
 											/* Input timer clock selection is wrong */
 											i_ReturnValue = -6;
-										}	// if (dw_Test == 1)
-										//END JK 27.10.03 : Add the possibility to use a 40 Mhz quartz
-									}	// if ((b_HardwareGateLevel == 0) || (b_HardwareGateLevel == 1))
+										}	/*  if (dw_Test == 1) */
+										/* END JK 27.10.03 : Add the possibility to use a 40 Mhz quartz */
+									}	/*  if ((b_HardwareGateLevel == 0) || (b_HardwareGateLevel == 1)) */
 									else {
 										/* Selection from hardware gate level is wrong */
 										DPRINTK("Selection from hardware gate level is wrong\n");
 										i_ReturnValue = -9;
-									}	// if ((b_HardwareGateLevel == 0) || (b_HardwareGateLevel == 1))
-								}	// if ((b_OutputLevel == 0) || (b_OutputLevel == 1))
+									}	/*  if ((b_HardwareGateLevel == 0) || (b_HardwareGateLevel == 1)) */
+								}	/*  if ((b_OutputLevel == 0) || (b_OutputLevel == 1)) */
 								else {
 									/* Selection from output clock level is wrong */
 									DPRINTK("Selection from output clock level is wrong\n");
 									i_ReturnValue = -8;
-								}	// if ((b_OutputLevel == 0) || (b_OutputLevel == 1))
-							}	// if ((b_InputClockLevel == 0) || (b_InputClockLevel == 1))
+								}	/*  if ((b_OutputLevel == 0) || (b_OutputLevel == 1)) */
+							}	/*  if ((b_InputClockLevel == 0) || (b_InputClockLevel == 1)) */
 							else {
 								/* Selection from input clock level is wrong */
 								DPRINTK("Selection from input clock level is wrong\n");
 								i_ReturnValue = -7;
-							}	// if ((b_InputClockLevel == 0) || (b_InputClockLevel == 1))
+							}	/*  if ((b_InputClockLevel == 0) || (b_InputClockLevel == 1)) */
 						} else {
 							/* Input timer clock selection is wrong */
 							DPRINTK("Input timer clock selection is wrong\n");
@@ -373,18 +373,18 @@ INT i_APCI1710_InsnConfigInitTimer(struct comedi_device * dev, struct comedi_sub
 						DPRINTK("Input timer clock selection is wrong\n");
 						i_ReturnValue = -6;
 					}
-				}	// if ((b_TimerMode >= 0) && (b_TimerMode <= 5))
+				}	/*  if ((b_TimerMode >= 0) && (b_TimerMode <= 5)) */
 				else {
 					/* Timer mode selection is wrong */
 					DPRINTK("Timer mode selection is wrong\n");
 					i_ReturnValue = -5;
-				}	// if ((b_TimerMode >= 0) && (b_TimerMode <= 5))
-			}	// if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2))
+				}	/*  if ((b_TimerMode >= 0) && (b_TimerMode <= 5)) */
+			}	/*  if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) */
 			else {
 				/* Timer selection wrong */
 				DPRINTK("Timer selection wrong\n");
 				i_ReturnValue = -3;
-			}	// if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2))
+			}	/*  if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) */
 		} else {
 			/* The module is not a TIMER module */
 			DPRINTK("The module is not a TIMER module\n");
@@ -396,17 +396,17 @@ INT i_APCI1710_InsnConfigInitTimer(struct comedi_device * dev, struct comedi_sub
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_     i_APCI1710_EnableTimer                       |
-|                               (BYTE_ b_BoardHandle,                        |
-|                                BYTE_ b_ModulNbr,                           |
-|                                BYTE_ b_TimerNbr,                           |
-|                                BYTE_ b_InterruptEnable)
-INT i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device *dev,struct comedi_subdevice *s,
+|                               (unsigned char_ b_BoardHandle,                        |
+|                                unsigned char_ b_ModulNbr,                           |
+|                                unsigned char_ b_TimerNbr,                           |
+|                                unsigned char_ b_InterruptEnable)
+int i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device *dev,struct comedi_subdevice *s,
 	struct comedi_insn *insn,unsigned int *data)                |
 +----------------------------------------------------------------------------+
 | Task              : Enable OR Disable the Timer (b_TimerNbr) from selected module     |
@@ -416,22 +416,22 @@ INT i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device *dev,struct come
 |                     generate a interrupt after the timer value reach       |
 |                     the zero. See function "i_APCI1710_SetBoardIntRoutineX"|
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_   b_BoardHandle     : Handle of board            |
+| Input Parameters  : unsigned char_   b_BoardHandle     : Handle of board            |
 |                                                 APCI-1710                  |
-|                     BYTE_   b_ModulNbr        : Selected module number     |
+|                     unsigned char_   b_ModulNbr        : Selected module number     |
 |                                                 (0 to 3)                   |
-|                     BYTE_   b_TimerNbr        : Timer number to enable     |
+|                     unsigned char_   b_TimerNbr        : Timer number to enable     |
 |                                                 (0 to 2)                   |
-|                     BYTE_   b_InterruptEnable : Enable or disable the      |
+|                     unsigned char_   b_InterruptEnable : Enable or disable the      |
 |                                                 timer interrupt.           |
 |                                                 APCI1710_ENABLE :          |
 |                                                 Enable the timer interrupt |
 |                                                 APCI1710_DISABLE :         |
 |                                                 Disable the timer interrupt|
 i_ReturnValue=insn->n;
-	b_ModulNbr        = (BYTE) CR_AREF(insn->chanspec);
-	b_TimerNbr		  = (BYTE) CR_CHAN(insn->chanspec);
-	b_ActionType      = (BYTE) data[0]; // enable disable
+	b_ModulNbr        = (unsigned char) CR_AREF(insn->chanspec);
+	b_TimerNbr		  = (unsigned char) CR_CHAN(insn->chanspec);
+	b_ActionType      = (unsigned char) data[0]; /*  enable disable */
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
 +----------------------------------------------------------------------------+
@@ -448,21 +448,21 @@ i_ReturnValue=insn->n;
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device * dev,
-					   struct comedi_subdevice * s,
-					   struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device *dev,
+					   struct comedi_subdevice *s,
+					   struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_DummyRead;
-	BYTE b_ModulNbr;
-	BYTE b_TimerNbr;
-	BYTE b_ActionType;
-	BYTE b_InterruptEnable;
+	int i_ReturnValue = 0;
+	unsigned int dw_DummyRead;
+	unsigned char b_ModulNbr;
+	unsigned char b_TimerNbr;
+	unsigned char b_ActionType;
+	unsigned char b_InterruptEnable;
 
 	i_ReturnValue = insn->n;
-	b_ModulNbr = (BYTE) CR_AREF(insn->chanspec);
-	b_TimerNbr = (BYTE) CR_CHAN(insn->chanspec);
-	b_ActionType = (BYTE) data[0];	// enable disable
+	b_ModulNbr = (unsigned char) CR_AREF(insn->chanspec);
+	b_TimerNbr = (unsigned char) CR_CHAN(insn->chanspec);
+	b_ActionType = (unsigned char) data[0];	/*  enable disable */
 
 	/* Test the module number */
 	if (b_ModulNbr < 4) {
@@ -475,7 +475,7 @@ INT i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device * dev,
 
 					switch (b_ActionType) {
 					case APCI1710_ENABLE:
-						b_InterruptEnable = (BYTE) data[1];
+						b_InterruptEnable = (unsigned char) data[1];
 						/* Test the interrupt selection */
 						if ((b_InterruptEnable == APCI1710_ENABLE) ||
 						    (b_InterruptEnable == APCI1710_DISABLE)) {
@@ -487,9 +487,9 @@ INT i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device * dev,
 								devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord = devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord | 0x8;
 
 								outl(devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord, devpriv->s_BoardInfos.ui_Address + 32 + (b_TimerNbr * 4) + (64 * b_ModulNbr));
-								devpriv->tsk_Current = current;	// Save the current process task structure
+								devpriv->tsk_Current = current;	/*  Save the current process task structure */
 
-							}	// if (b_InterruptEnable == APCI1710_ENABLE)
+							}	/*  if (b_InterruptEnable == APCI1710_ENABLE) */
 							else {
 								/* Disable the interrupt */
 								devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord = devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord & 0xF7;
@@ -498,7 +498,7 @@ INT i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device * dev,
 
 								/* Save the interrupt flag */
 								devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.b_InterruptMask = devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.b_InterruptMask & (0xFF - (1 << b_TimerNbr));
-							}	// if (b_InterruptEnable == APCI1710_ENABLE)
+							}	/*  if (b_InterruptEnable == APCI1710_ENABLE) */
 
 							/* Test if error occur */
 							if (i_ReturnValue >= 0) {
@@ -530,7 +530,7 @@ INT i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device * dev,
 						/* Disable the timer */
 						outl(0, devpriv->s_BoardInfos.ui_Address + 44 + (b_TimerNbr * 4) + (64 * b_ModulNbr));
 						break;
-					}	// Switch end
+					}	/*  Switch end */
 				} else {
 					/* Timer not initialised see function */
 					DPRINTK ("Timer not initialised see function\n");
@@ -540,7 +540,7 @@ INT i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device * dev,
 				/* Timer selection wrong */
 				DPRINTK("Timer selection wrong\n");
 				i_ReturnValue = -3;
-			}	// if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2))
+			}	/*  if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) */
 		} else {
 			/* The module is not a TIMER module */
 			DPRINTK("The module is not a TIMER module\n");
@@ -552,24 +552,24 @@ INT i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_     i_APCI1710_ReadAllTimerValue                 |
-|                                       (BYTE_     b_BoardHandle,            |
-|                                        BYTE_     b_ModulNbr,               |
+|                                       (unsigned char_     b_BoardHandle,            |
+|                                        unsigned char_     b_ModulNbr,               |
 |                                        PULONG_ pul_TimerValueArray)
-INT i_APCI1710_InsnReadAllTimerValue(struct comedi_device *dev,struct comedi_subdevice *s,
+int i_APCI1710_InsnReadAllTimerValue(struct comedi_device *dev,struct comedi_subdevice *s,
 	struct comedi_insn *insn,unsigned int *data)        |
 +----------------------------------------------------------------------------+
 | Task              : Return the all timer values from selected timer        |
 |                     module (b_ModulNbr).                                   |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_   b_BoardHandle     : Handle of board            |
+| Input Parameters  : unsigned char_   b_BoardHandle     : Handle of board            |
 |                                                 APCI-1710                  |
-|                     BYTE_   b_ModulNbr        : Selected module number     |
+|                     unsigned char_   b_ModulNbr        : Selected module number     |
 |                                                 (0 to 3)                   |
 +----------------------------------------------------------------------------+
 | Output Parameters : PULONG_ pul_TimerValueArray : Timer value array.       |
@@ -590,16 +590,16 @@ INT i_APCI1710_InsnReadAllTimerValue(struct comedi_device *dev,struct comedi_sub
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InsnReadAllTimerValue(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI1710_InsnReadAllTimerValue(struct comedi_device *dev, struct comedi_subdevice *s,
 				     struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = 0;
-	BYTE b_ModulNbr, b_ReadType;
-	PULONG pul_TimerValueArray;
+	int i_ReturnValue = 0;
+	unsigned char b_ModulNbr, b_ReadType;
+	unsigned int *pul_TimerValueArray;
 
 	b_ModulNbr = CR_AREF(insn->chanspec);
 	b_ReadType = CR_CHAN(insn->chanspec);
-	pul_TimerValueArray = (PULONG) data;
+	pul_TimerValueArray = (unsigned int *) data;
 	i_ReturnValue = insn->n;
 
 	switch (b_ReadType) {
@@ -662,8 +662,8 @@ INT i_APCI1710_InsnReadAllTimerValue(struct comedi_device *dev, struct comedi_su
 			i_ReturnValue = -2;
 		}
 
-	}			// End of Switch
-	return (i_ReturnValue);
+	}			/*  End of Switch */
+	return i_ReturnValue;
 }
 
 /*
@@ -681,11 +681,11 @@ struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data)
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InsnBitsTimer(struct comedi_device * dev, struct comedi_subdevice * s,
-			     struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnBitsTimer(struct comedi_device *dev, struct comedi_subdevice *s,
+			     struct comedi_insn *insn, unsigned int *data)
 {
-	BYTE b_BitsType;
-	INT i_ReturnValue = 0;
+	unsigned char b_BitsType;
+	int i_ReturnValue = 0;
 	b_BitsType = data[0];
 
 	printk("\n82X54");
@@ -693,30 +693,30 @@ INT i_APCI1710_InsnBitsTimer(struct comedi_device * dev, struct comedi_subdevice
 	switch (b_BitsType) {
 	case APCI1710_TIMER_READVALUE:
 		i_ReturnValue = i_APCI1710_ReadTimerValue(dev,
-							  (BYTE)CR_AREF(insn->chanspec),
-							  (BYTE)CR_CHAN(insn->chanspec),
-							  (PULONG) & data[0]);
+							  (unsigned char)CR_AREF(insn->chanspec),
+							  (unsigned char)CR_CHAN(insn->chanspec),
+							  (unsigned int *) &data[0]);
 		break;
 
 	case APCI1710_TIMER_GETOUTPUTLEVEL:
 		i_ReturnValue = i_APCI1710_GetTimerOutputLevel(dev,
-							       (BYTE)CR_AREF(insn->chanspec),
-							       (BYTE)CR_CHAN(insn->chanspec),
-							       (PBYTE) &data[0]);
+							       (unsigned char)CR_AREF(insn->chanspec),
+							       (unsigned char)CR_CHAN(insn->chanspec),
+							       (unsigned char *) &data[0]);
 		break;
 
 	case APCI1710_TIMER_GETPROGRESSSTATUS:
 		i_ReturnValue = i_APCI1710_GetTimerProgressStatus(dev,
-								  (BYTE)CR_AREF(insn->chanspec),
-								  (BYTE)CR_CHAN(insn->chanspec),
-								  (PBYTE)&data[0]);
+								  (unsigned char)CR_AREF(insn->chanspec),
+								  (unsigned char)CR_CHAN(insn->chanspec),
+								  (unsigned char *)&data[0]);
 		break;
 
 	case APCI1710_TIMER_WRITEVALUE:
 		i_ReturnValue = i_APCI1710_WriteTimerValue(dev,
-							   (BYTE)CR_AREF(insn->chanspec),
-							   (BYTE)CR_CHAN(insn->chanspec),
-							   (ULONG)data[1]);
+							   (unsigned char)CR_AREF(insn->chanspec),
+							   (unsigned char)CR_CHAN(insn->chanspec),
+							   (unsigned int)data[1]);
 
 		break;
 
@@ -727,25 +727,25 @@ INT i_APCI1710_InsnBitsTimer(struct comedi_device * dev, struct comedi_subdevice
 
 	if (i_ReturnValue >= 0)
 		i_ReturnValue = insn->n;
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_     i_APCI1710_ReadTimerValue                    |
-|                                       (BYTE_     b_BoardHandle,            |
-|                                        BYTE_     b_ModulNbr,               |
-|                                        BYTE_     b_TimerNbr,               |
+|                                       (unsigned char_     b_BoardHandle,            |
+|                                        unsigned char_     b_ModulNbr,               |
+|                                        unsigned char_     b_TimerNbr,               |
 |                                        PULONG_ pul_TimerValue)             |
 +----------------------------------------------------------------------------+
 | Task              : Return the timer value from selected digital timer     |
 |                     (b_TimerNbr) from selected timer  module (b_ModulNbr). |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_   b_BoardHandle     : Handle of board            |
+| Input Parameters  : unsigned char_   b_BoardHandle     : Handle of board            |
 |                                                 APCI-1710                  |
-|                     BYTE_   b_ModulNbr        : Selected module number     |
+|                     unsigned char_   b_ModulNbr        : Selected module number     |
 |                                                 (0 to 3)                   |
-|                     BYTE_   b_TimerNbr        : Timer number to read       |
+|                     unsigned char_   b_TimerNbr        : Timer number to read       |
 |                                                 (0 to 2)                   |
 +----------------------------------------------------------------------------+
 | Output Parameters : PULONG_ pul_TimerValue    : Timer value                |
@@ -760,11 +760,11 @@ INT i_APCI1710_InsnBitsTimer(struct comedi_device * dev, struct comedi_subdevice
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_ReadTimerValue(struct comedi_device * dev,
-			      BYTE b_ModulNbr, BYTE b_TimerNbr,
-			      PULONG pul_TimerValue)
+int i_APCI1710_ReadTimerValue(struct comedi_device *dev,
+			      unsigned char b_ModulNbr, unsigned char b_TimerNbr,
+			      unsigned int *pul_TimerValue)
 {
-	INT i_ReturnValue = 0;
+	int i_ReturnValue = 0;
 
 	/* Test the module number */
 	if (b_ModulNbr < 4) {
@@ -800,7 +800,7 @@ INT i_APCI1710_ReadTimerValue(struct comedi_device * dev,
 				/* Timer selection wrong */
 				DPRINTK("Timer selection wrong\n");
 				i_ReturnValue = -3;
-			}	// if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2))
+			}	/*  if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) */
 		} else {
 			/* The module is not a TIMER module */
 			DPRINTK("The module is not a TIMER module\n");
@@ -812,29 +812,29 @@ INT i_APCI1710_ReadTimerValue(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 	/*
 	   +----------------------------------------------------------------------------+
 	   | Function Name     : _INT_     i_APCI1710_GetTimerOutputLevel               |
-	   |                                       (BYTE_     b_BoardHandle,            |
-	   |                                        BYTE_     b_ModulNbr,               |
-	   |                                        BYTE_     b_TimerNbr,               |
-	   |                                        PBYTE_   pb_OutputLevel)            |
+	   |                                       (unsigned char_     b_BoardHandle,            |
+	   |                                        unsigned char_     b_ModulNbr,               |
+	   |                                        unsigned char_     b_TimerNbr,               |
+	   |                                        unsigned char *_   pb_OutputLevel)            |
 	   +----------------------------------------------------------------------------+
 	   | Task              : Return the output signal level (pb_OutputLevel) from   |
 	   |                     selected digital timer (b_TimerNbr) from selected timer|
 	   |                     module (b_ModulNbr).                                   |
 	   +----------------------------------------------------------------------------+
-	   | Input Parameters  : BYTE_   b_BoardHandle     : Handle of board            |
+	   | Input Parameters  : unsigned char_   b_BoardHandle     : Handle of board            |
 	   |                                                 APCI-1710                  |
-	   |                     BYTE_   b_ModulNbr        : Selected module number     |
+	   |                     unsigned char_   b_ModulNbr        : Selected module number     |
 	   |                                                 (0 to 3)                   |
-	   |                     BYTE_   b_TimerNbr        : Timer number to test       |
+	   |                     unsigned char_   b_TimerNbr        : Timer number to test       |
 	   |                                                 (0 to 2)                   |
 	   +----------------------------------------------------------------------------+
-	   | Output Parameters : PBYTE_ pb_OutputLevel     : Output signal level        |
+	   | Output Parameters : unsigned char *_ pb_OutputLevel     : Output signal level        |
 	   |                                                 0 : The output is low      |
 	   |                                                 1 : The output is high     |
 	   +----------------------------------------------------------------------------+
@@ -848,12 +848,12 @@ INT i_APCI1710_ReadTimerValue(struct comedi_device * dev,
 	   +----------------------------------------------------------------------------+
 	 */
 
-INT i_APCI1710_GetTimerOutputLevel(struct comedi_device * dev,
-				   BYTE b_ModulNbr, BYTE b_TimerNbr,
-				   PBYTE pb_OutputLevel)
+int i_APCI1710_GetTimerOutputLevel(struct comedi_device *dev,
+				   unsigned char b_ModulNbr, unsigned char b_TimerNbr,
+				   unsigned char *pb_OutputLevel)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_TimerStatus;
+	int i_ReturnValue = 0;
+	unsigned int dw_TimerStatus;
 
 	/* Test the module number */
 	if (b_ModulNbr < 4) {
@@ -869,7 +869,7 @@ INT i_APCI1710_GetTimerOutputLevel(struct comedi_device * dev,
 					/* Read the timer status */
 					dw_TimerStatus = inl(devpriv->s_BoardInfos.ui_Address + 16 + (b_TimerNbr * 4) + (64 * b_ModulNbr));
 
-					*pb_OutputLevel = (BYTE) (((dw_TimerStatus >> 7) & 1) ^ devpriv-> s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].b_OutputLevel);
+					*pb_OutputLevel = (unsigned char) (((dw_TimerStatus >> 7) & 1) ^ devpriv-> s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].b_OutputLevel);
 				} else {
 					/* Timer not initialised see function */
 					DPRINTK("Timer not initialised see function\n");
@@ -879,7 +879,7 @@ INT i_APCI1710_GetTimerOutputLevel(struct comedi_device * dev,
 				/* Timer selection wrong */
 				DPRINTK("Timer selection wrong\n");
 				i_ReturnValue = -3;
-			}	// if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2))
+			}	/*  if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) */
 		} else {
 			/* The module is not a TIMER module */
 			DPRINTK("The module is not a TIMER module\n");
@@ -891,29 +891,29 @@ INT i_APCI1710_GetTimerOutputLevel(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_     i_APCI1710_GetTimerProgressStatus            |
-|                                       (BYTE_     b_BoardHandle,            |
-|                                        BYTE_     b_ModulNbr,               |
-|                                        BYTE_     b_TimerNbr,               |
-|                                        PBYTE_   pb_TimerStatus)            |
+|                                       (unsigned char_     b_BoardHandle,            |
+|                                        unsigned char_     b_ModulNbr,               |
+|                                        unsigned char_     b_TimerNbr,               |
+|                                        unsigned char *_   pb_TimerStatus)            |
 +----------------------------------------------------------------------------+
 | Task              : Return the progress status (pb_TimerStatus) from       |
 |                     selected digital timer (b_TimerNbr) from selected timer|
 |                     module (b_ModulNbr).                                   |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_   b_BoardHandle     : Handle of board            |
+| Input Parameters  : unsigned char_   b_BoardHandle     : Handle of board            |
 |                                                 APCI-1710                  |
-|                     BYTE_   b_ModulNbr        : Selected module number     |
+|                     unsigned char_   b_ModulNbr        : Selected module number     |
 |                                                 (0 to 3)                   |
-|                     BYTE_   b_TimerNbr        : Timer number to test       |
+|                     unsigned char_   b_TimerNbr        : Timer number to test       |
 |                                                 (0 to 2)                   |
 +----------------------------------------------------------------------------+
-| Output Parameters : PBYTE_ pb_TimerStatus     : Output signal level        |
+| Output Parameters : unsigned char *_ pb_TimerStatus     : Output signal level        |
 |                                                 0 : Timer not in progress  |
 |                                                 1 : Timer in progress      |
 +----------------------------------------------------------------------------+
@@ -927,12 +927,12 @@ INT i_APCI1710_GetTimerOutputLevel(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_GetTimerProgressStatus(struct comedi_device *dev,
-				      BYTE b_ModulNbr, BYTE b_TimerNbr,
-				      PBYTE pb_TimerStatus)
+int i_APCI1710_GetTimerProgressStatus(struct comedi_device *dev,
+				      unsigned char b_ModulNbr, unsigned char b_TimerNbr,
+				      unsigned char *pb_TimerStatus)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_TimerStatus;
+	int i_ReturnValue = 0;
+	unsigned int dw_TimerStatus;
 
 	/* Test the module number */
 	if (b_ModulNbr < 4) {
@@ -949,7 +949,7 @@ INT i_APCI1710_GetTimerProgressStatus(struct comedi_device *dev,
 					/* Read the timer status */
 					dw_TimerStatus = inl(devpriv->s_BoardInfos.ui_Address + 16 + (b_TimerNbr * 4) + (64 * b_ModulNbr));
 
-					*pb_TimerStatus = (BYTE) ((dw_TimerStatus) >> 8) & 1;
+					*pb_TimerStatus = (unsigned char) ((dw_TimerStatus) >> 8) & 1;
 					printk("ProgressStatus : %d", *pb_TimerStatus);
 				} else {
 					/* Timer not initialised see function */
@@ -958,7 +958,7 @@ INT i_APCI1710_GetTimerProgressStatus(struct comedi_device *dev,
 			} else {
 				/* Timer selection wrong */
 				i_ReturnValue = -3;
-			}	// if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2))
+			}	/*  if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) */
 		} else {
 			/* The module is not a TIMER module */
 
@@ -976,9 +976,9 @@ INT i_APCI1710_GetTimerProgressStatus(struct comedi_device *dev,
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_     i_APCI1710_WriteTimerValue                   |
-|                                       (BYTE_   b_BoardHandle,              |
-|                                        BYTE_   b_ModulNbr,                 |
-|                                        BYTE_   b_TimerNbr,                 |
+|                                       (unsigned char_   b_BoardHandle,              |
+|                                        unsigned char_   b_ModulNbr,                 |
+|                                        unsigned char_   b_TimerNbr,                 |
 |                                        ULONG_ ul_WriteValue)               |
 +----------------------------------------------------------------------------+
 | Task              : Write the value (ul_WriteValue) into the selected timer|
@@ -986,11 +986,11 @@ INT i_APCI1710_GetTimerProgressStatus(struct comedi_device *dev,
 |                     The action in depend of the time mode selection.       |
 |                     See timer mode description table.                      |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_   b_BoardHandle     : Handle of board            |
+| Input Parameters  : unsigned char_   b_BoardHandle     : Handle of board            |
 |                                                 APCI-1710                  |
-|                     BYTE_   b_ModulNbr        : Selected module number     |
+|                     unsigned char_   b_ModulNbr        : Selected module number     |
 |                                                 (0 to 3)                   |
-|                     BYTE_   b_TimerNbr        : Timer number to write      |
+|                     unsigned char_   b_TimerNbr        : Timer number to write      |
 |                                                 (0 to 2)                   |
 |                     ULONG_ ul_WriteValue      : Value to write             |
 +----------------------------------------------------------------------------+
@@ -1006,11 +1006,11 @@ INT i_APCI1710_GetTimerProgressStatus(struct comedi_device *dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_WriteTimerValue(struct comedi_device * dev,
-			       BYTE b_ModulNbr, BYTE b_TimerNbr,
-			       ULONG ul_WriteValue)
+int i_APCI1710_WriteTimerValue(struct comedi_device *dev,
+			       unsigned char b_ModulNbr, unsigned char b_TimerNbr,
+			       unsigned int ul_WriteValue)
 {
-	INT i_ReturnValue = 0;
+	int i_ReturnValue = 0;
 
 	/* Test the module number */
 	if (b_ModulNbr < 4) {
@@ -1031,7 +1031,7 @@ INT i_APCI1710_WriteTimerValue(struct comedi_device * dev,
 				/* Timer selection wrong */
 				DPRINTK("Timer selection wrong\n");
 				i_ReturnValue = -3;
-			}	// if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2))
+			}	/*  if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) */
 		} else {
 			/* The module is not a TIMER module */
 			DPRINTK("The module is not a TIMER module\n");
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.h
index 4797c0b77a4..9698ae13509 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.h
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.h
@@ -34,40 +34,40 @@
 /*
  * 82X54 TIMER INISIALISATION FUNCTION
  */
-INT i_APCI1710_InsnConfigInitTimer(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI1710_InsnConfigInitTimer(struct comedi_device *dev, struct comedi_subdevice *s,
 				   struct comedi_insn *insn, unsigned int *data);
 
-INT i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device *dev,
+int i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device *dev,
 					   struct comedi_subdevice *s,
 					   struct comedi_insn *insn, unsigned int *data);
 
 /*
  * 82X54 READ FUNCTION
  */
-INT i_APCI1710_InsnReadAllTimerValue(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI1710_InsnReadAllTimerValue(struct comedi_device *dev, struct comedi_subdevice *s,
 				     struct comedi_insn *insn, unsigned int *data);
 
-INT i_APCI1710_InsnBitsTimer(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI1710_InsnBitsTimer(struct comedi_device *dev, struct comedi_subdevice *s,
 			     struct comedi_insn *insn, unsigned int *data);
 
 /*
  * 82X54 READ & WRITE FUNCTION
  */
-INT i_APCI1710_ReadTimerValue(struct comedi_device *dev,
-			      BYTE b_ModulNbr, BYTE b_TimerNbr,
-			      PULONG pul_TimerValue);
+int i_APCI1710_ReadTimerValue(struct comedi_device *dev,
+			      unsigned char b_ModulNbr, unsigned char b_TimerNbr,
+			      unsigned int *pul_TimerValue);
 
-INT i_APCI1710_GetTimerOutputLevel(struct comedi_device *dev,
-				   BYTE b_ModulNbr, BYTE b_TimerNbr,
-				   PBYTE pb_OutputLevel);
+int i_APCI1710_GetTimerOutputLevel(struct comedi_device *dev,
+				   unsigned char b_ModulNbr, unsigned char b_TimerNbr,
+				   unsigned char *pb_OutputLevel);
 
-INT i_APCI1710_GetTimerProgressStatus(struct comedi_device *dev,
-				      BYTE b_ModulNbr, BYTE b_TimerNbr,
-				      PBYTE pb_TimerStatus);
+int i_APCI1710_GetTimerProgressStatus(struct comedi_device *dev,
+				      unsigned char b_ModulNbr, unsigned char b_TimerNbr,
+				      unsigned char *pb_TimerStatus);
 
 /*
  * 82X54 WRITE FUNCTION
  */
-INT i_APCI1710_WriteTimerValue(struct comedi_device *dev,
-			       BYTE b_ModulNbr, BYTE b_TimerNbr,
-			       ULONG ul_WriteValue);
+int i_APCI1710_WriteTimerValue(struct comedi_device *dev,
+			       unsigned char b_ModulNbr, unsigned char b_TimerNbr,
+			       unsigned int ul_WriteValue);
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c
index 1a54d3b2c69..ccb109a851f 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c
@@ -3,13 +3,13 @@
 
 Copyright (C) 2004,2005  ADDI-DATA GmbH for the source code of this module.
 
-        ADDI-DATA GmbH
-        Dieselstrasse 3
-        D-77833 Ottersweier
-        Tel: +19(0)7223/9493-0
-        Fax: +49(0)7223/9493-92
-        http://www.addi-data-com
-        info@addi-data.com
+	ADDI-DATA GmbH
+	Dieselstrasse 3
+	D-77833 Ottersweier
+	Tel: +19(0)7223/9493-0
+	Fax: +49(0)7223/9493-92
+	http://www.addi-data-com
+	info@addi-data.com
 
 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
 
@@ -62,11 +62,11 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_     i_APCI1710_InitChrono                        |
-|                                       (BYTE_     b_BoardHandle,            |
-|                                        BYTE_     b_ModulNbr,               |
-|                                        BYTE_     b_ChronoMode,             |
-|                                        BYTE_     b_PCIInputClock,          |
-|                                        BYTE_     b_TimingUnit,             |
+|                                       (unsigned char_     b_BoardHandle,            |
+|                                        unsigned char_     b_ModulNbr,               |
+|                                        unsigned char_     b_ChronoMode,             |
+|                                        unsigned char_     b_PCIInputClock,          |
+|                                        unsigned char_     b_TimingUnit,             |
 |                                        ULONG_   ul_TimingInterval,         |
 |                                        PULONG_ pul_RealTimingInterval)
 
@@ -88,12 +88,12 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 |                     The mode 4 to 7 is appropriate for measuring the timing|
 |                     between  two event.                                    |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_   b_BoardHandle    : Handle of board APCI-1710   |
-| BYTE_   b_ModulNbr  CR_AREF(insn->chanspec)  : Module number to configure  |
+| Input Parameters  : unsigned char_   b_BoardHandle    : Handle of board APCI-1710   |
+| unsigned char_   b_ModulNbr  CR_AREF(insn->chanspec)  : Module number to configure  |
 |                                                (0 to 3)                    |
-| BYTE_   b_ChronoMode				data[0]    : Chronometer action mode     |
+| unsigned char_   b_ChronoMode				data[0]    : Chronometer action mode     |
 |                                                (0 to 7).                   |
-| BYTE_   b_PCIInputClock			data[1] : Selection from PCI bus clock|
+| unsigned char_   b_PCIInputClock			data[1] : Selection from PCI bus clock|
 |                                                - APCI1710_30MHZ :          |
 |                                                  The PC have a PCI bus     |
 |                                                  clock from 30 MHz         |
@@ -104,7 +104,7 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 |                                                  The APCI-1710 have a      |
 |                                                  integrated 40Mhz          |
 |                                                  quartz.                   |
-|               BYTE_   b_TimingUnit	data[2]    : Base timing unity (0 to 4) |
+|               unsigned char_   b_TimingUnit	data[2]    : Base timing unity (0 to 4) |
 |                                                 0 : ns                     |
 |                                                 1 : µs                     |
 |                                                 2 : ms                     |
@@ -131,23 +131,23 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InsnConfigInitChrono(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnConfigInitChrono(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = 0;
-	ULONG ul_TimerValue = 0;
-	ULONG ul_TimingInterval = 0;
-	ULONG ul_RealTimingInterval = 0;
+	int i_ReturnValue = 0;
+	unsigned int ul_TimerValue = 0;
+	unsigned int ul_TimingInterval = 0;
+	unsigned int ul_RealTimingInterval = 0;
 	double d_RealTimingInterval = 0;
-	DWORD dw_ModeArray[8] =
+	unsigned int dw_ModeArray[8] =
 		{ 0x01, 0x05, 0x00, 0x04, 0x02, 0x0E, 0x0A, 0x06 };
-	BYTE b_ModulNbr, b_ChronoMode, b_PCIInputClock, b_TimingUnit;
+	unsigned char b_ModulNbr, b_ChronoMode, b_PCIInputClock, b_TimingUnit;
 
 	b_ModulNbr = CR_AREF(insn->chanspec);
-	b_ChronoMode = (BYTE) data[0];
-	b_PCIInputClock = (BYTE) data[1];
-	b_TimingUnit = (BYTE) data[2];
-	ul_TimingInterval = (ULONG) data[3];
+	b_ChronoMode = (unsigned char) data[0];
+	b_PCIInputClock = (unsigned char) data[1];
+	b_TimingUnit = (unsigned char) data[2];
+	ul_TimingInterval = (unsigned int) data[3];
 	i_ReturnValue = insn->n;
 
 	/**************************/
@@ -214,7 +214,7 @@ INT i_APCI1710_InsnConfigInitChrono(struct comedi_device * dev, struct comedi_su
 
 										ul_TimerValue
 											=
-											(ULONG)
+											(unsigned int)
 											(ul_TimingInterval
 											*
 											(0.001 * b_PCIInputClock));
@@ -237,7 +237,7 @@ INT i_APCI1710_InsnConfigInitChrono(struct comedi_device * dev, struct comedi_su
 
 										ul_RealTimingInterval
 											=
-											(ULONG)
+											(unsigned int)
 											(ul_TimerValue
 											/
 											(0.001 * (double)b_PCIInputClock));
@@ -272,7 +272,7 @@ INT i_APCI1710_InsnConfigInitChrono(struct comedi_device * dev, struct comedi_su
 										if (b_PCIInputClock != APCI1710_40MHZ) {
 											ul_TimerValue
 												=
-												(ULONG)
+												(unsigned int)
 												(
 												(double)
 												(ul_TimerValue)
@@ -294,7 +294,7 @@ INT i_APCI1710_InsnConfigInitChrono(struct comedi_device * dev, struct comedi_su
 
 										ul_TimerValue
 											=
-											(ULONG)
+											(unsigned int)
 											(ul_TimingInterval
 											*
 											(1.0 * b_PCIInputClock));
@@ -317,7 +317,7 @@ INT i_APCI1710_InsnConfigInitChrono(struct comedi_device * dev, struct comedi_su
 
 										ul_RealTimingInterval
 											=
-											(ULONG)
+											(unsigned int)
 											(ul_TimerValue
 											/
 											(1.0 * (double)b_PCIInputClock));
@@ -354,7 +354,7 @@ INT i_APCI1710_InsnConfigInitChrono(struct comedi_device * dev, struct comedi_su
 										if (b_PCIInputClock != APCI1710_40MHZ) {
 											ul_TimerValue
 												=
-												(ULONG)
+												(unsigned int)
 												(
 												(double)
 												(ul_TimerValue)
@@ -400,7 +400,7 @@ INT i_APCI1710_InsnConfigInitChrono(struct comedi_device * dev, struct comedi_su
 
 										ul_RealTimingInterval
 											=
-											(ULONG)
+											(unsigned int)
 											(ul_TimerValue
 											/
 											(1000.0 * (double)b_PCIInputClock));
@@ -435,7 +435,7 @@ INT i_APCI1710_InsnConfigInitChrono(struct comedi_device * dev, struct comedi_su
 										if (b_PCIInputClock != APCI1710_40MHZ) {
 											ul_TimerValue
 												=
-												(ULONG)
+												(unsigned int)
 												(
 												(double)
 												(ul_TimerValue)
@@ -457,7 +457,7 @@ INT i_APCI1710_InsnConfigInitChrono(struct comedi_device * dev, struct comedi_su
 
 										ul_TimerValue
 											=
-											(ULONG)
+											(unsigned int)
 											(ul_TimingInterval
 											*
 											(1000000.0
@@ -482,7 +482,7 @@ INT i_APCI1710_InsnConfigInitChrono(struct comedi_device * dev, struct comedi_su
 
 										ul_RealTimingInterval
 											=
-											(ULONG)
+											(unsigned int)
 											(ul_TimerValue
 											/
 											(1000000.0
@@ -520,7 +520,7 @@ INT i_APCI1710_InsnConfigInitChrono(struct comedi_device * dev, struct comedi_su
 										if (b_PCIInputClock != APCI1710_40MHZ) {
 											ul_TimerValue
 												=
-												(ULONG)
+												(unsigned int)
 												(
 												(double)
 												(ul_TimerValue)
@@ -542,7 +542,7 @@ INT i_APCI1710_InsnConfigInitChrono(struct comedi_device * dev, struct comedi_su
 
 										ul_TimerValue
 											=
-											(ULONG)
+											(unsigned int)
 											(
 											(ul_TimingInterval
 												*
@@ -570,7 +570,7 @@ INT i_APCI1710_InsnConfigInitChrono(struct comedi_device * dev, struct comedi_su
 
 										ul_RealTimingInterval
 											=
-											(ULONG)
+											(unsigned int)
 											(ul_TimerValue
 											/
 											(1000000.0
@@ -608,7 +608,7 @@ INT i_APCI1710_InsnConfigInitChrono(struct comedi_device * dev, struct comedi_su
 										if (b_PCIInputClock != APCI1710_40MHZ) {
 											ul_TimerValue
 												=
-												(ULONG)
+												(unsigned int)
 												(
 												(double)
 												(ul_TimerValue)
@@ -736,7 +736,7 @@ INT i_APCI1710_InsnConfigInitChrono(struct comedi_device * dev, struct comedi_su
 							DPRINTK("Base timing selection is wrong\n");
 							i_ReturnValue = -7;
 						}
-					}	// if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4))
+					}	/*  if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) */
 					else {
 		       /***********************************/
 						/* Timing unity selection is wrong */
@@ -744,8 +744,8 @@ INT i_APCI1710_InsnConfigInitChrono(struct comedi_device * dev, struct comedi_su
 
 						DPRINTK("Timing unity selection is wrong\n");
 						i_ReturnValue = -6;
-					}	// if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4))
-				}	// if ((b_PCIInputClock == APCI1710_30MHZ) || (b_PCIInputClock == APCI1710_33MHZ))
+					}	/*  if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) */
+				}	/*  if ((b_PCIInputClock == APCI1710_30MHZ) || (b_PCIInputClock == APCI1710_33MHZ)) */
 				else {
 		    /*****************************************/
 					/* The selected PCI input clock is wrong */
@@ -753,8 +753,8 @@ INT i_APCI1710_InsnConfigInitChrono(struct comedi_device * dev, struct comedi_su
 
 					DPRINTK("The selected PCI input clock is wrong\n");
 					i_ReturnValue = -5;
-				}	// if ((b_PCIInputClock == APCI1710_30MHZ) || (b_PCIInputClock == APCI1710_33MHZ))
-			}	// if (b_ChronoMode >= 0 && b_ChronoMode <= 7)
+				}	/*  if ((b_PCIInputClock == APCI1710_30MHZ) || (b_PCIInputClock == APCI1710_33MHZ)) */
+			}	/*  if (b_ChronoMode >= 0 && b_ChronoMode <= 7) */
 			else {
 		 /***************************************/
 				/* Chronometer mode selection is wrong */
@@ -762,7 +762,7 @@ INT i_APCI1710_InsnConfigInitChrono(struct comedi_device * dev, struct comedi_su
 
 				DPRINTK("Chronometer mode selection is wrong\n");
 				i_ReturnValue = -4;
-			}	// if (b_ChronoMode >= 0 && b_ChronoMode <= 7)
+			}	/*  if (b_ChronoMode >= 0 && b_ChronoMode <= 7) */
 		} else {
 	      /******************************************/
 			/* The module is not a Chronometer module */
@@ -780,17 +780,17 @@ INT i_APCI1710_InsnConfigInitChrono(struct comedi_device * dev, struct comedi_su
 		i_ReturnValue = -2;
 	}
 	data[0] = ul_RealTimingInterval;
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_EnableChrono                          |
-|                                               (BYTE_ b_BoardHandle,        |
-|                                                BYTE_ b_ModulNbr,           |
-|                                                BYTE_ b_CycleMode,          |
-|                                                BYTE_ b_InterruptEnable)
-INT i_APCI1710_InsnWriteEnableDisableChrono(struct comedi_device *dev,
+|                                               (unsigned char_ b_BoardHandle,        |
+|                                                unsigned char_ b_ModulNbr,           |
+|                                                unsigned char_ b_CycleMode,          |
+|                                                unsigned char_ b_InterruptEnable)
+int i_APCI1710_InsnWriteEnableDisableChrono(struct comedi_device *dev,
 struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data)						 |
 +----------------------------------------------------------------------------+
 | Task              : Enable the chronometer from selected module            |
@@ -810,12 +810,12 @@ struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data)						 |
 |                     witch the " i_APCI1710_EnableChrono" function, if no   |
 |                     stop signal occur this start signal is ignored.
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle  : Handle of board APCI-1710       |
-|                     BYTE_ b_ModulNbr   CR_AREF(chanspec)  : Selected module number (0 to 3) |
+| Input Parameters  : unsigned char_ b_BoardHandle  : Handle of board APCI-1710       |
+|                     unsigned char_ b_ModulNbr   CR_AREF(chanspec)  : Selected module number (0 to 3) |
                                   data[0]  ENABle/Disable chrono
-|                     BYTE_ b_CycleMode    : Selected the chronometer        |
+|                     unsigned char_ b_CycleMode    : Selected the chronometer        |
 |                                  data[1]           acquisition mode                |
-|                     BYTE_ b_InterruptEnable : Enable or disable the        |
+|                     unsigned char_ b_InterruptEnable : Enable or disable the        |
 |                                   data[2]            chronometer interrupt.       |
 |                                               APCI1710_ENABLE:             |
 |                                               Enable the chronometer       |
@@ -840,15 +840,15 @@ struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data)						 |
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InsnWriteEnableDisableChrono(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnWriteEnableDisableChrono(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = 0;
-	BYTE b_ModulNbr, b_CycleMode, b_InterruptEnable, b_Action;
+	int i_ReturnValue = 0;
+	unsigned char b_ModulNbr, b_CycleMode, b_InterruptEnable, b_Action;
 	b_ModulNbr = CR_AREF(insn->chanspec);
-	b_Action = (BYTE) data[0];
-	b_CycleMode = (BYTE) data[1];
-	b_InterruptEnable = (BYTE) data[2];
+	b_Action = (unsigned char) data[0];
+	b_CycleMode = (unsigned char) data[1];
+	b_InterruptEnable = (unsigned char) data[2];
 	i_ReturnValue = insn->n;
 
 	/**************************/
@@ -951,7 +951,7 @@ INT i_APCI1710_InsnWriteEnableDisableChrono(struct comedi_device * dev,
 									ui_Address
 									+ 32 +
 									(64 * b_ModulNbr));
-								devpriv->tsk_Current = current;	// Save the current process task structure
+								devpriv->tsk_Current = current;	/*  Save the current process task structure */
 							}
 
 			  /***********************************/
@@ -980,7 +980,7 @@ INT i_APCI1710_InsnWriteEnableDisableChrono(struct comedi_device * dev,
 								36 +
 								(64 * b_ModulNbr));
 
-						}	// if ((b_InterruptEnable == APCI1710_ENABLE) || (b_InterruptEnable == APCI1710_DISABLE))
+						}	/*  if ((b_InterruptEnable == APCI1710_ENABLE) || (b_InterruptEnable == APCI1710_DISABLE)) */
 						else {
 		       /********************************/
 							/* Interrupt parameter is wrong */
@@ -988,8 +988,8 @@ INT i_APCI1710_InsnWriteEnableDisableChrono(struct comedi_device * dev,
 
 							DPRINTK("Interrupt parameter is wrong\n");
 							i_ReturnValue = -6;
-						}	// if ((b_InterruptEnable == APCI1710_ENABLE) || (b_InterruptEnable == APCI1710_DISABLE))
-					}	// if ((b_CycleMode == APCI1710_SINGLE) || (b_CycleMode == APCI1710_CONTINUOUS))
+						}	/*  if ((b_InterruptEnable == APCI1710_ENABLE) || (b_InterruptEnable == APCI1710_DISABLE)) */
+					}	/*  if ((b_CycleMode == APCI1710_SINGLE) || (b_CycleMode == APCI1710_CONTINUOUS)) */
 					else {
 		    /***********************************************/
 						/* Chronometer acquisition mode cycle is wrong */
@@ -997,7 +997,7 @@ INT i_APCI1710_InsnWriteEnableDisableChrono(struct comedi_device * dev,
 
 						DPRINTK("Chronometer acquisition mode cycle is wrong\n");
 						i_ReturnValue = -5;
-					}	// if ((b_CycleMode == APCI1710_SINGLE) || (b_CycleMode == APCI1710_CONTINUOUS))
+					}	/*  if ((b_CycleMode == APCI1710_SINGLE) || (b_CycleMode == APCI1710_CONTINUOUS)) */
 					break;
 
 				case APCI1710_DISABLE:
@@ -1046,7 +1046,7 @@ INT i_APCI1710_InsnWriteEnableDisableChrono(struct comedi_device * dev,
 				default:
 					DPRINTK("Inputs wrong! Enable or Disable chrono\n");
 					i_ReturnValue = -8;
-				}	// switch ENABLE/DISABLE
+				}	/*  switch ENABLE/DISABLE */
 			} else {
 		 /*******************************/
 				/* Chronometer not initialised */
@@ -1072,7 +1072,7 @@ INT i_APCI1710_InsnWriteEnableDisableChrono(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
@@ -1090,36 +1090,36 @@ struct comedi_insn *insn,unsigned int *data)                   |
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InsnReadChrono(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnReadChrono(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	BYTE b_ReadType;
-	INT i_ReturnValue = insn->n;
+	unsigned char b_ReadType;
+	int i_ReturnValue = insn->n;
 
 	b_ReadType = CR_CHAN(insn->chanspec);
 
 	switch (b_ReadType) {
 	case APCI1710_CHRONO_PROGRESS_STATUS:
 		i_ReturnValue = i_APCI1710_GetChronoProgressStatus(dev,
-			(BYTE) CR_AREF(insn->chanspec), (PBYTE) & data[0]);
+			(unsigned char) CR_AREF(insn->chanspec), (unsigned char *) &data[0]);
 		break;
 
 	case APCI1710_CHRONO_READVALUE:
 		i_ReturnValue = i_APCI1710_ReadChronoValue(dev,
-			(BYTE) CR_AREF(insn->chanspec),
-			(UINT) insn->unused[0],
-			(PBYTE) & data[0], (PULONG) & data[1]);
+			(unsigned char) CR_AREF(insn->chanspec),
+			(unsigned int) insn->unused[0],
+			(unsigned char *) &data[0], (unsigned int *) &data[1]);
 		break;
 
 	case APCI1710_CHRONO_CONVERTVALUE:
 		i_ReturnValue = i_APCI1710_ConvertChronoValue(dev,
-			(BYTE) CR_AREF(insn->chanspec),
-			(ULONG) insn->unused[0],
-			(PULONG) & data[0],
-			(PBYTE) & data[1],
-			(PBYTE) & data[2],
-			(PUINT) & data[3],
-			(PUINT) & data[4], (PUINT) & data[5]);
+			(unsigned char) CR_AREF(insn->chanspec),
+			(unsigned int) insn->unused[0],
+			(unsigned int *) &data[0],
+			(unsigned char *) &data[1],
+			(unsigned char *) &data[2],
+			(unsigned int *) &data[3],
+			(unsigned int *) &data[4], (unsigned int *) &data[5]);
 		break;
 
 	case APCI1710_CHRONO_READINTERRUPT:
@@ -1152,22 +1152,22 @@ INT i_APCI1710_InsnReadChrono(struct comedi_device * dev, struct comedi_subdevic
 
 	if (i_ReturnValue >= 0)
 		i_ReturnValue = insn->n;
-	return (i_ReturnValue);
+	return i_ReturnValue;
 
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_GetChronoProgressStatus               |
-|                               (BYTE_    b_BoardHandle,                     |
-|                                BYTE_    b_ModulNbr,                        |
-|                                PBYTE_  pb_ChronoStatus)                    |
+|                               (unsigned char_    b_BoardHandle,                     |
+|                                unsigned char_    b_ModulNbr,                        |
+|                                unsigned char *_  pb_ChronoStatus)                    |
 +----------------------------------------------------------------------------+
 | Task              : Return the chronometer status (pb_ChronoStatus) from   |
 |                     selected chronometer module (b_ModulNbr).              |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle  : Handle of board APCI-1710       |
-|                     BYTE_ b_ModulNbr     : Selected module number (0 to 3) |
+| Input Parameters  : unsigned char_ b_BoardHandle  : Handle of board APCI-1710       |
+|                     unsigned char_ b_ModulNbr     : Selected module number (0 to 3) |
 +----------------------------------------------------------------------------+
 | Output Parameters : PULONG_  pb_ChronoStatus : Return the chronometer      |
 |                                                status.                     |
@@ -1194,11 +1194,11 @@ INT i_APCI1710_InsnReadChrono(struct comedi_device * dev, struct comedi_subdevic
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_GetChronoProgressStatus(struct comedi_device * dev,
-	BYTE b_ModulNbr, PBYTE pb_ChronoStatus)
+int i_APCI1710_GetChronoProgressStatus(struct comedi_device *dev,
+	unsigned char b_ModulNbr, unsigned char *pb_ChronoStatus)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_Status;
+	int i_ReturnValue = 0;
+	unsigned int dw_Status;
 
 	/**************************/
 	/* Test the module number */
@@ -1233,7 +1233,7 @@ INT i_APCI1710_GetChronoProgressStatus(struct comedi_device * dev,
 		    /******************/
 
 					*pb_ChronoStatus = 3;
-				}	// if ((dw_Status & 8) == 8)
+				}	/*  if ((dw_Status & 8) == 8) */
 				else {
 		    /*******************************/
 					/* Test if measurement stopped */
@@ -1245,7 +1245,7 @@ INT i_APCI1710_GetChronoProgressStatus(struct comedi_device * dev,
 		       /***********************/
 
 						*pb_ChronoStatus = 2;
-					}	// if ((dw_Status & 2) == 2)
+					}	/*  if ((dw_Status & 2) == 2) */
 					else {
 		       /*******************************/
 						/* Test if measurement started */
@@ -1257,16 +1257,16 @@ INT i_APCI1710_GetChronoProgressStatus(struct comedi_device * dev,
 			  /************************/
 
 							*pb_ChronoStatus = 1;
-						}	// if ((dw_Status & 1) == 1)
+						}	/*  if ((dw_Status & 1) == 1) */
 						else {
 			  /***************************/
 							/* Measurement not started */
 			  /***************************/
 
 							*pb_ChronoStatus = 0;
-						}	// if ((dw_Status & 1) == 1)
-					}	// if ((dw_Status & 2) == 2)
-				}	// if ((dw_Status & 8) == 8)
+						}	/*  if ((dw_Status & 1) == 1) */
+					}	/*  if ((dw_Status & 2) == 2) */
+				}	/*  if ((dw_Status & 8) == 8) */
 			} else {
 		 /*******************************/
 				/* Chronometer not initialised */
@@ -1289,16 +1289,16 @@ INT i_APCI1710_GetChronoProgressStatus(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_ReadChronoValue                       |
-|                               (BYTE_     b_BoardHandle,                    |
-|                                BYTE_     b_ModulNbr,                       |
-|                                UINT_    ui_TimeOut,                        |
-|                                PBYTE_   pb_ChronoStatus,                   |
+|                               (unsigned char_     b_BoardHandle,                    |
+|                                unsigned char_     b_ModulNbr,                       |
+|                                unsigned int_    ui_TimeOut,                        |
+|                                unsigned char *_   pb_ChronoStatus,                   |
 |                                PULONG_ pul_ChronoValue)                    |
 +----------------------------------------------------------------------------+
 | Task              : Return the chronometer status (pb_ChronoStatus) and the|
@@ -1323,8 +1323,8 @@ INT i_APCI1710_GetChronoProgressStatus(struct comedi_device * dev,
 |                     "i_APCI1710_InitChrono" function and the time unity is |
 |                     the b_TimingUnit from "i_APCI1710_InitChrono" function|
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle  : Handle of board APCI-1710       |
-|                     BYTE_ b_ModulNbr     : Selected module number (0 to 3) |
+| Input Parameters  : unsigned char_ b_BoardHandle  : Handle of board APCI-1710       |
+|                     unsigned char_ b_ModulNbr     : Selected module number (0 to 3) |
 +----------------------------------------------------------------------------+
 | Output Parameters : PULONG_  pb_ChronoStatus : Return the chronometer      |
 |                                                status.                     |
@@ -1341,7 +1341,7 @@ INT i_APCI1710_GetChronoProgressStatus(struct comedi_device * dev,
 |                                                   timing witch the         |
 |                                                   function                 |
 |                                                   "i_APCI1710_InitChrono"  |
-|                     PULONG  pul_ChronoValue  : Chronometer timing value.   |
+|                     unsigned int *  pul_ChronoValue  : Chronometer timing value.   |
 +----------------------------------------------------------------------------+
 | Return Value      :  0: No error                                           |
 |                     -1: The handle parameter of the board is wrong         |
@@ -1355,13 +1355,13 @@ INT i_APCI1710_GetChronoProgressStatus(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_ReadChronoValue(struct comedi_device * dev,
-	BYTE b_ModulNbr,
-	UINT ui_TimeOut, PBYTE pb_ChronoStatus, PULONG pul_ChronoValue)
+int i_APCI1710_ReadChronoValue(struct comedi_device *dev,
+	unsigned char b_ModulNbr,
+	unsigned int ui_TimeOut, unsigned char *pb_ChronoStatus, unsigned int *pul_ChronoValue)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_Status;
-	DWORD dw_TimeOut = 0;
+	int i_ReturnValue = 0;
+	unsigned int dw_Status;
+	unsigned int dw_TimeOut = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -1430,7 +1430,7 @@ INT i_APCI1710_ReadChronoValue(struct comedi_device * dev,
 							}
 
 							break;
-						}	// if ((dw_Status & 8) == 8)
+						}	/*  if ((dw_Status & 8) == 8) */
 						else {
 			     /*******************************/
 							/* Test if measurement stopped */
@@ -1464,7 +1464,7 @@ INT i_APCI1710_ReadChronoValue(struct comedi_device * dev,
 									outl(0, devpriv->s_BoardInfos.ui_Address + 36 + (64 * b_ModulNbr));
 								}
 								break;
-							}	// if ((dw_Status & 2) == 2)
+							}	/*  if ((dw_Status & 2) == 2) */
 							else {
 				/*******************************/
 								/* Test if measurement started */
@@ -1478,7 +1478,7 @@ INT i_APCI1710_ReadChronoValue(struct comedi_device * dev,
 									*pb_ChronoStatus
 										=
 										1;
-								}	// if ((dw_Status & 1) == 1)
+								}	/*  if ((dw_Status & 1) == 1) */
 								else {
 				   /***************************/
 									/* Measurement not started */
@@ -1487,9 +1487,9 @@ INT i_APCI1710_ReadChronoValue(struct comedi_device * dev,
 									*pb_ChronoStatus
 										=
 										0;
-								}	// if ((dw_Status & 1) == 1)
-							}	// if ((dw_Status & 2) == 2)
-						}	// if ((dw_Status & 8) == 8)
+								}	/*  if ((dw_Status & 1) == 1) */
+							}	/*  if ((dw_Status & 2) == 2) */
+						}	/*  if ((dw_Status & 8) == 8) */
 
 						if (dw_TimeOut == ui_TimeOut) {
 			     /*****************/
@@ -1507,7 +1507,7 @@ INT i_APCI1710_ReadChronoValue(struct comedi_device * dev,
 							mdelay(1000);
 
 						}
-					}	// for (;;)
+					}	/*  for (;;) */
 
 		       /*****************************/
 					/* Test if stop signal occur */
@@ -1575,39 +1575,39 @@ INT i_APCI1710_ReadChronoValue(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_ConvertChronoValue                    |
-|                               (BYTE_     b_BoardHandle,                    |
-|                                BYTE_     b_ModulNbr,                       |
+|                               (unsigned char_     b_BoardHandle,                    |
+|                                unsigned char_     b_ModulNbr,                       |
 |                                ULONG_   ul_ChronoValue,                    |
 |                                PULONG_ pul_Hour,                           |
-|                                PBYTE_   pb_Minute,                         |
-|                                PBYTE_   pb_Second,                         |
-|                                PUINT_  pui_MilliSecond,                    |
-|                                PUINT_  pui_MicroSecond,                    |
-|                                PUINT_  pui_NanoSecond)                     |
+|                                unsigned char *_   pb_Minute,                         |
+|                                unsigned char *_   pb_Second,                         |
+|                                unsigned int *_  pui_MilliSecond,                    |
+|                                unsigned int *_  pui_MicroSecond,                    |
+|                                unsigned int *_  pui_NanoSecond)                     |
 +----------------------------------------------------------------------------+
 | Task              : Convert the chronometer measured timing                |
 |                     (ul_ChronoValue) in to h, mn, s, ms, µs, ns.           |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_   b_BoardHandle : Handle of board APCI-1710      |
-|                     BYTE_   b_ModulNbr    : Selected module number (0 to 3)|
+| Input Parameters  : unsigned char_   b_BoardHandle : Handle of board APCI-1710      |
+|                     unsigned char_   b_ModulNbr    : Selected module number (0 to 3)|
 |                     ULONG_ ul_ChronoValue : Measured chronometer timing    |
 |                                             value.                         |
 |                                             See"i_APCI1710_ReadChronoValue"|
 +----------------------------------------------------------------------------+
 | Output Parameters : PULONG_   pul_Hour        : Chronometer timing hour    |
-|                     PBYTE_     pb_Minute      : Chronometer timing minute  |
-|                     PBYTE_     pb_Second      : Chronometer timing second  |
-|                     PUINT_    pui_MilliSecond  : Chronometer timing mini   |
+|                     unsigned char *_     pb_Minute      : Chronometer timing minute  |
+|                     unsigned char *_     pb_Second      : Chronometer timing second  |
+|                     unsigned int *_    pui_MilliSecond  : Chronometer timing mini   |
 |                                                 second                     |
-|                     PUINT_    pui_MicroSecond : Chronometer timing micro   |
+|                     unsigned int *_    pui_MicroSecond : Chronometer timing micro   |
 |                                                 second                     |
-|                     PUINT_    pui_NanoSecond  : Chronometer timing nano    |
+|                     unsigned int *_    pui_NanoSecond  : Chronometer timing nano    |
 |                                                 second                     |
 +----------------------------------------------------------------------------+
 | Return Value      :  0: No error                                           |
@@ -1619,15 +1619,15 @@ INT i_APCI1710_ReadChronoValue(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_ConvertChronoValue(struct comedi_device * dev,
-	BYTE b_ModulNbr,
-	ULONG ul_ChronoValue,
-	PULONG pul_Hour,
-	PBYTE pb_Minute,
-	PBYTE pb_Second,
-	PUINT pui_MilliSecond, PUINT pui_MicroSecond, PUINT pui_NanoSecond)
+int i_APCI1710_ConvertChronoValue(struct comedi_device *dev,
+	unsigned char b_ModulNbr,
+	unsigned int ul_ChronoValue,
+	unsigned int *pul_Hour,
+	unsigned char *pb_Minute,
+	unsigned char *pb_Second,
+	unsigned int *pui_MilliSecond, unsigned int *pui_MicroSecond, unsigned int *pui_NanoSecond)
 {
-	INT i_ReturnValue = 0;
+	int i_ReturnValue = 0;
 	double d_Hour;
 	double d_Minute;
 	double d_Second;
@@ -1681,7 +1681,7 @@ INT i_APCI1710_ConvertChronoValue(struct comedi_device * dev,
 			    /**********************/
 
 					d_Hour = d_Hour / (double)60.0;
-					*pul_Hour = (ULONG) d_Hour;
+					*pul_Hour = (unsigned int) d_Hour;
 
 			    /************************/
 					/* Calculate the minute */
@@ -1689,7 +1689,7 @@ INT i_APCI1710_ConvertChronoValue(struct comedi_device * dev,
 
 					d_Minute = d_Hour - *pul_Hour;
 					d_Minute = d_Minute * 60;
-					*pb_Minute = (BYTE) d_Minute;
+					*pb_Minute = (unsigned char) d_Minute;
 
 			    /************************/
 					/* Calculate the second */
@@ -1697,7 +1697,7 @@ INT i_APCI1710_ConvertChronoValue(struct comedi_device * dev,
 
 					d_Second = d_Minute - *pb_Minute;
 					d_Second = d_Second * 60;
-					*pb_Second = (BYTE) d_Second;
+					*pb_Second = (unsigned char) d_Second;
 
 			    /*****************************/
 					/* Calculate the mini second */
@@ -1705,7 +1705,7 @@ INT i_APCI1710_ConvertChronoValue(struct comedi_device * dev,
 
 					d_MilliSecond = d_Second - *pb_Second;
 					d_MilliSecond = d_MilliSecond * 1000;
-					*pui_MilliSecond = (UINT) d_MilliSecond;
+					*pui_MilliSecond = (unsigned int) d_MilliSecond;
 
 			    /******************************/
 					/* Calculate the micro second */
@@ -1715,7 +1715,7 @@ INT i_APCI1710_ConvertChronoValue(struct comedi_device * dev,
 						d_MilliSecond -
 						*pui_MilliSecond;
 					d_MicroSecond = d_MicroSecond * 1000;
-					*pui_MicroSecond = (UINT) d_MicroSecond;
+					*pui_MicroSecond = (unsigned int) d_MicroSecond;
 
 			    /******************************/
 					/* Calculate the micro second */
@@ -1725,7 +1725,7 @@ INT i_APCI1710_ConvertChronoValue(struct comedi_device * dev,
 						d_MicroSecond -
 						*pui_MicroSecond;
 					d_NanoSecond = d_NanoSecond * 1000;
-					*pui_NanoSecond = (UINT) d_NanoSecond;
+					*pui_NanoSecond = (unsigned int) d_NanoSecond;
 					break;
 				}
 
@@ -1752,21 +1752,21 @@ INT i_APCI1710_ConvertChronoValue(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
-| Function Name     : INT i_APCI1710_InsnBitsChronoDigitalIO(struct comedi_device *dev,struct comedi_subdevice *s,
+| Function Name     : int i_APCI1710_InsnBitsChronoDigitalIO(struct comedi_device *dev,struct comedi_subdevice *s,
 	struct comedi_insn *insn,unsigned int *data)                    |
 +----------------------------------------------------------------------------+
 | Task              : Sets the output witch has been passed with the         |
 |                     parameter b_Channel. Setting an output means setting an|
 |                     output high.                                           |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle   : Handle of board APCI-1710      |
-|                     BYTE_ b_ModulNbr      : Selected module number (0 to 3)|
-|                     BYTE_ b_OutputChannel : Selection from digital output  |
+| Input Parameters  : unsigned char_ b_BoardHandle   : Handle of board APCI-1710      |
+|                     unsigned char_ b_ModulNbr      : Selected module number (0 to 3)|
+|                     unsigned char_ b_OutputChannel : Selection from digital output  |
 |                           CR_CHAN()                  channel (0 to 2)               |
 |                                              0 : Channel H                 |
 |                                              1 : Channel A                 |
@@ -1787,19 +1787,19 @@ INT i_APCI1710_ConvertChronoValue(struct comedi_device * dev,
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_SetChronoChlOff                       |
-|                               (BYTE_  b_BoardHandle,                       |
-|                                BYTE_  b_ModulNbr,                          |
-|                                BYTE_  b_OutputChannel)                     |
+|                               (unsigned char_  b_BoardHandle,                       |
+|                                unsigned char_  b_ModulNbr,                          |
+|                                unsigned char_  b_OutputChannel)                     |
 +----------------------------------------------------------------------------+
 | Task              : Resets the output witch has been passed with the       |
 |                     parameter b_Channel. Resetting an output means setting |
 |                     an output low.                                         |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle   : Handle of board APCI-1710
+| Input Parameters  : unsigned char_ b_BoardHandle   : Handle of board APCI-1710
                         data[0] : Chl ON, Chl OFF , Chl Read , Port Read
 
-|                     BYTE_ b_ModulNbr  CR_AREF    : Selected module number (0 to 3)|
-|                     BYTE_ b_OutputChannel CR_CHAN : Selection from digital output  |
+|                     unsigned char_ b_ModulNbr  CR_AREF    : Selected module number (0 to 3)|
+|                     unsigned char_ b_OutputChannel CR_CHAN : Selection from digital output  |
 |                                             channel (0 to 2)               |
 |                                              0 : Channel H                 |
 |                                              1 : Channel A                 |
@@ -1820,24 +1820,24 @@ INT i_APCI1710_ConvertChronoValue(struct comedi_device * dev,
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_ReadChronoChlValue                    |
-|                               (BYTE_   b_BoardHandle,                      |
-|                                BYTE_   b_ModulNbr,                         |
-|                                BYTE_   b_InputChannel,                     |
-|                                PBYTE_ pb_ChannelStatus)                    |
+|                               (unsigned char_   b_BoardHandle,                      |
+|                                unsigned char_   b_ModulNbr,                         |
+|                                unsigned char_   b_InputChannel,                     |
+|                                unsigned char *_ pb_ChannelStatus)                    |
 +----------------------------------------------------------------------------+
 | Task              : Return the status from selected digital input          |
 |                     (b_InputChannel) from selected chronometer             |
 |                     module (b_ModulNbr).                                   |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle   : Handle of board APCI-1710      |
-|                     BYTE_ b_ModulNbr      : Selected module number (0 to 3)|
-|                     BYTE_ b_InputChannel  : Selection from digital input   |
+| Input Parameters  : unsigned char_ b_BoardHandle   : Handle of board APCI-1710      |
+|                     unsigned char_ b_ModulNbr      : Selected module number (0 to 3)|
+|                     unsigned char_ b_InputChannel  : Selection from digital input   |
 |                                             channel (0 to 2)               |
 |                                   CR_CHAN()             0 : Channel E               |
 |                                                1 : Channel F               |
 |                                                2 : Channel G               |
 +----------------------------------------------------------------------------+
-| Output Parameters : PBYTE_ pb_ChannelStatus : Digital input channel status.|
+| Output Parameters : unsigned char *_ pb_ChannelStatus : Digital input channel status.|
 |                                data[0]                0 : Channel is not active   |
 |                                                1 : Channel is active       |
 +----------------------------------------------------------------------------+
@@ -1854,17 +1854,17 @@ INT i_APCI1710_ConvertChronoValue(struct comedi_device * dev,
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_ReadChronoPortValue                   |
-|                               (BYTE_   b_BoardHandle,                      |
-|                                BYTE_   b_ModulNbr,                         |
-|                                PBYTE_ pb_PortValue)                        |
+|                               (unsigned char_   b_BoardHandle,                      |
+|                                unsigned char_   b_ModulNbr,                         |
+|                                unsigned char *_ pb_PortValue)                        |
 +----------------------------------------------------------------------------+
 | Task              : Return the status from digital inputs port from        |
 |                     selected  (b_ModulNbr) chronometer module.             |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle   : Handle of board APCI-1710      |
-|                     BYTE_ b_ModulNbr      : Selected module number (0 to 3)|
+| Input Parameters  : unsigned char_ b_BoardHandle   : Handle of board APCI-1710      |
+|                     unsigned char_ b_ModulNbr      : Selected module number (0 to 3)|
 +----------------------------------------------------------------------------+
-| Output Parameters : PBYTE_ pb_PortValue   : Digital inputs port status.
+| Output Parameters : unsigned char *_ pb_PortValue   : Digital inputs port status.
 |                     data[0]
 +----------------------------------------------------------------------------+
 | Return Value      :  0: No error                                           |
@@ -1876,18 +1876,18 @@ INT i_APCI1710_ConvertChronoValue(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InsnBitsChronoDigitalIO(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnBitsChronoDigitalIO(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = 0;
-	BYTE b_ModulNbr, b_OutputChannel, b_InputChannel, b_IOType;
-	DWORD dw_Status;
-	PBYTE pb_ChannelStatus;
-	PBYTE pb_PortValue;
+	int i_ReturnValue = 0;
+	unsigned char b_ModulNbr, b_OutputChannel, b_InputChannel, b_IOType;
+	unsigned int dw_Status;
+	unsigned char *pb_ChannelStatus;
+	unsigned char *pb_PortValue;
 
 	b_ModulNbr = CR_AREF(insn->chanspec);
 	i_ReturnValue = insn->n;
-	b_IOType = (BYTE) data[0];
+	b_IOType = (unsigned char) data[0];
 
 	/**************************/
 	/* Test the module number */
@@ -1915,14 +1915,14 @@ INT i_APCI1710_InsnBitsChronoDigitalIO(struct comedi_device * dev,
 				case APCI1710_CHRONO_SET_CHANNELOFF:
 
 					b_OutputChannel =
-						(BYTE) CR_CHAN(insn->chanspec);
+						(unsigned char) CR_CHAN(insn->chanspec);
 					if (b_OutputChannel <= 2) {
 
 						outl(0, devpriv->s_BoardInfos.
 							ui_Address + 20 +
 							(b_OutputChannel * 4) +
 							(64 * b_ModulNbr));
-					}	// if ((b_OutputChannel >= 0) && (b_OutputChannel <= 2))
+					}	/*  if ((b_OutputChannel >= 0) && (b_OutputChannel <= 2)) */
 					else {
 		    /****************************************/
 						/* The selected digital output is wrong */
@@ -1931,21 +1931,21 @@ INT i_APCI1710_InsnBitsChronoDigitalIO(struct comedi_device * dev,
 						DPRINTK("The selected digital output is wrong\n");
 						i_ReturnValue = -4;
 
-					}	// if ((b_OutputChannel >= 0) && (b_OutputChannel <= 2))
+					}	/*  if ((b_OutputChannel >= 0) && (b_OutputChannel <= 2)) */
 
 					break;
 
 				case APCI1710_CHRONO_SET_CHANNELON:
 
 					b_OutputChannel =
-						(BYTE) CR_CHAN(insn->chanspec);
+						(unsigned char) CR_CHAN(insn->chanspec);
 					if (b_OutputChannel <= 2) {
 
 						outl(1, devpriv->s_BoardInfos.
 							ui_Address + 20 +
 							(b_OutputChannel * 4) +
 							(64 * b_ModulNbr));
-					}	// if ((b_OutputChannel >= 0) && (b_OutputChannel <= 2))
+					}	/*  if ((b_OutputChannel >= 0) && (b_OutputChannel <= 2)) */
 					else {
 		    /****************************************/
 						/* The selected digital output is wrong */
@@ -1954,7 +1954,7 @@ INT i_APCI1710_InsnBitsChronoDigitalIO(struct comedi_device * dev,
 						DPRINTK("The selected digital output is wrong\n");
 						i_ReturnValue = -4;
 
-					}	// if ((b_OutputChannel >= 0) && (b_OutputChannel <= 2))
+					}	/*  if ((b_OutputChannel >= 0) && (b_OutputChannel <= 2)) */
 
 					break;
 
@@ -1962,9 +1962,9 @@ INT i_APCI1710_InsnBitsChronoDigitalIO(struct comedi_device * dev,
 		 /**********************************/
 					/* Test the digital input channel */
 		 /**********************************/
-					pb_ChannelStatus = (PBYTE) & data[0];
+					pb_ChannelStatus = (unsigned char *) &data[0];
 					b_InputChannel =
-						(BYTE) CR_CHAN(insn->chanspec);
+						(unsigned char) CR_CHAN(insn->chanspec);
 
 					if (b_InputChannel <= 2) {
 
@@ -1975,10 +1975,10 @@ INT i_APCI1710_InsnBitsChronoDigitalIO(struct comedi_device * dev,
 							(64 * b_ModulNbr));
 
 						*pb_ChannelStatus =
-							(BYTE) (((dw_Status >>
+							(unsigned char) (((dw_Status >>
 									b_InputChannel)
 								& 1) ^ 1);
-					}	// if ((b_InputChannel >= 0) && (b_InputChannel <= 2))
+					}	/*  if ((b_InputChannel >= 0) && (b_InputChannel <= 2)) */
 					else {
 		    /***************************************/
 						/* The selected digital input is wrong */
@@ -1986,13 +1986,13 @@ INT i_APCI1710_InsnBitsChronoDigitalIO(struct comedi_device * dev,
 
 						DPRINTK("The selected digital input is wrong\n");
 						i_ReturnValue = -4;
-					}	// if ((b_InputChannel >= 0) && (b_InputChannel <= 2))
+					}	/*  if ((b_InputChannel >= 0) && (b_InputChannel <= 2)) */
 
 					break;
 
 				case APCI1710_CHRONO_READ_PORT:
 
-					pb_PortValue = (PBYTE) & data[0];
+					pb_PortValue = (unsigned char *) &data[0];
 
 					dw_Status =
 						inl(devpriv->s_BoardInfos.
@@ -2000,7 +2000,7 @@ INT i_APCI1710_InsnBitsChronoDigitalIO(struct comedi_device * dev,
 						(64 * b_ModulNbr));
 
 					*pb_PortValue =
-						(BYTE) ((dw_Status & 0x7) ^ 7);
+						(unsigned char) ((dw_Status & 0x7) ^ 7);
 					break;
 				}
 			} else {
@@ -2028,5 +2028,5 @@ INT i_APCI1710_InsnBitsChronoDigitalIO(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.h
index 26b50cefee5..29bad1d144a 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.h
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.h
@@ -35,10 +35,10 @@
 /*
  * CHRONOMETER INISIALISATION FUNCTION
  */
-INT i_APCI1710_InsnConfigInitChrono(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI1710_InsnConfigInitChrono(struct comedi_device *dev, struct comedi_subdevice *s,
 				    struct comedi_insn *insn, unsigned int *data);
 
-INT i_APCI1710_InsnWriteEnableDisableChrono(struct comedi_device *dev,
+int i_APCI1710_InsnWriteEnableDisableChrono(struct comedi_device *dev,
 					    struct comedi_subdevice *s,
 					    struct comedi_insn *insn,
 					    unsigned int *data);
@@ -46,29 +46,29 @@ INT i_APCI1710_InsnWriteEnableDisableChrono(struct comedi_device *dev,
 /*
  * CHRONOMETER READ FUNCTION
  */
-INT i_APCI1710_InsnReadChrono(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI1710_InsnReadChrono(struct comedi_device *dev, struct comedi_subdevice *s,
 			      struct comedi_insn *insn, unsigned int *data);
 
-INT i_APCI1710_GetChronoProgressStatus(struct comedi_device *dev,
-				       BYTE b_ModulNbr, PBYTE pb_ChronoStatus);
+int i_APCI1710_GetChronoProgressStatus(struct comedi_device *dev,
+				       unsigned char b_ModulNbr, unsigned char *pb_ChronoStatus);
 
-INT i_APCI1710_ReadChronoValue(struct comedi_device *dev,
-			       BYTE b_ModulNbr,
-			       UINT ui_TimeOut, PBYTE pb_ChronoStatus,
-			       PULONG pul_ChronoValue);
+int i_APCI1710_ReadChronoValue(struct comedi_device *dev,
+			       unsigned char b_ModulNbr,
+			       unsigned int ui_TimeOut, unsigned char *pb_ChronoStatus,
+			       unsigned int *pul_ChronoValue);
 
-INT i_APCI1710_ConvertChronoValue(struct comedi_device *dev,
-				  BYTE b_ModulNbr,
-				  ULONG ul_ChronoValue,
-				  PULONG pul_Hour,
-				  PBYTE pb_Minute,
-				  PBYTE pb_Second,
-				  PUINT pui_MilliSecond, PUINT pui_MicroSecond,
-				  PUINT pui_NanoSecond);
+int i_APCI1710_ConvertChronoValue(struct comedi_device *dev,
+				  unsigned char b_ModulNbr,
+				  unsigned int ul_ChronoValue,
+				  unsigned int *pul_Hour,
+				  unsigned char *pb_Minute,
+				  unsigned char *pb_Second,
+				  unsigned int *pui_MilliSecond, unsigned int *pui_MicroSecond,
+				  unsigned int *pui_NanoSecond);
 
 /*
  * CHRONOMETER DIGITAL INPUT OUTPUT FUNCTION
  */
-INT i_APCI1710_InsnBitsChronoDigitalIO(struct comedi_device *dev,
+int i_APCI1710_InsnBitsChronoDigitalIO(struct comedi_device *dev,
 				       struct comedi_subdevice *s, struct comedi_insn *insn,
 				       unsigned int *data);
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.c
index 8be27aedaaf..f3e47e5791d 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.c
@@ -3,13 +3,13 @@
 
 Copyright (C) 2004,2005  ADDI-DATA GmbH for the source code of this module.
 
-        ADDI-DATA GmbH
-        Dieselstrasse 3
-        D-77833 Ottersweier
-        Tel: +19(0)7223/9493-0
-        Fax: +49(0)7223/9493-92
-        http://www.addi-data-com
-        info@addi-data.com
+	ADDI-DATA GmbH
+	Dieselstrasse 3
+	D-77833 Ottersweier
+	Tel: +19(0)7223/9493-0
+	Fax: +49(0)7223/9493-92
+	http://www.addi-data-com
+	info@addi-data.com
 
 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
 
@@ -61,7 +61,7 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 
 /*
 +----------------------------------------------------------------------------+
-| Function Name     : INT i_APCI1710_InsnConfigDigitalIO(struct comedi_device *dev, |
+| Function Name     : int i_APCI1710_InsnConfigDigitalIO(struct comedi_device *dev, |
 |						struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data)|
 +----------------------------------------------------------------------------+
 | Task              : Configure the digital I/O operating mode from selected |
@@ -70,14 +70,14 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 |                     I/O.                                                   |
 +----------------------------------------------------------------------------+
 | Input Parameters  :													     |
-|                  BYTE_ b_ModulNbr      data[0]: Module number to               |
+|                  unsigned char_ b_ModulNbr      data[0]: Module number to               |
 |                                             configure (0 to 3)             |
-|                     BYTE_ b_ChannelAMode data[1]  : Channel A mode selection       |
+|                     unsigned char_ b_ChannelAMode data[1]  : Channel A mode selection       |
 |                                             0 : Channel used for digital   |
 |                                                 input                      |
 |                                             1 : Channel used for digital   |
 |                                                 output                     |
-|                     BYTE_ b_ChannelBMode data[2] : Channel B mode selection       |
+|                     unsigned char_ b_ChannelBMode data[2] : Channel B mode selection       |
 |                                             0 : Channel used for digital   |
 |                                                 input                      |
 |                                             1 : Channel used for digital   |
@@ -99,19 +99,19 @@ Activates and deactivates the digital output memory.
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InsnConfigDigitalIO(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnConfigDigitalIO(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	BYTE b_ModulNbr, b_ChannelAMode, b_ChannelBMode;
-	BYTE b_MemoryOnOff, b_ConfigType;
-	INT i_ReturnValue = 0;
-	DWORD dw_WriteConfig = 0;
-
-	b_ModulNbr = (BYTE) CR_AREF(insn->chanspec);
-	b_ConfigType = (BYTE) data[0];	// Memory or  Init
-	b_ChannelAMode = (BYTE) data[1];
-	b_ChannelBMode = (BYTE) data[2];
-	b_MemoryOnOff = (BYTE) data[1];	// if memory operation
+	unsigned char b_ModulNbr, b_ChannelAMode, b_ChannelBMode;
+	unsigned char b_MemoryOnOff, b_ConfigType;
+	int i_ReturnValue = 0;
+	unsigned int dw_WriteConfig = 0;
+
+	b_ModulNbr = (unsigned char) CR_AREF(insn->chanspec);
+	b_ConfigType = (unsigned char) data[0];	/*  Memory or  Init */
+	b_ChannelAMode = (unsigned char) data[1];
+	b_ChannelBMode = (unsigned char) data[2];
+	b_MemoryOnOff = (unsigned char) data[1];	/*  if memory operation */
 	i_ReturnValue = insn->n;
 
 		/**************************/
@@ -126,7 +126,7 @@ INT i_APCI1710_InsnConfigDigitalIO(struct comedi_device * dev, struct comedi_sub
 	switch (b_ConfigType) {
 	case APCI1710_DIGIO_MEMORYONOFF:
 
-		if (b_MemoryOnOff)	// If Memory ON
+		if (b_MemoryOnOff)	/*  If Memory ON */
 		{
 		 /****************************/
 			/* Set the output memory on */
@@ -140,7 +140,7 @@ INT i_APCI1710_InsnConfigDigitalIO(struct comedi_device * dev, struct comedi_sub
 		 /***************************/
 			devpriv->s_ModuleInfo[b_ModulNbr].
 				s_DigitalIOInfo.dw_OutputMemory = 0;
-		} else		// If memory off
+		} else		/*  If memory off */
 		{
 		 /*****************************/
 			/* Set the output memory off */
@@ -197,7 +197,7 @@ INT i_APCI1710_InsnConfigDigitalIO(struct comedi_device * dev, struct comedi_sub
 	/*****************************************/
 
 					dw_WriteConfig =
-						(DWORD) (b_ChannelAMode |
+						(unsigned int) (b_ChannelAMode |
 						(b_ChannelBMode * 2));
 
 	/***************************/
@@ -233,7 +233,7 @@ INT i_APCI1710_InsnConfigDigitalIO(struct comedi_device * dev, struct comedi_sub
 			DPRINTK("The module is not a digital I/O module\n");
 			i_ReturnValue = -3;
 		}
-	}			// end of Switch
+	}			/*  end of Switch */
 	printk("Return Value %d\n", i_ReturnValue);
 	return i_ReturnValue;
 }
@@ -257,9 +257,9 @@ INT i_APCI1710_InsnConfigDigitalIO(struct comedi_device * dev, struct comedi_sub
 
 
 |
-|  BYTE_ b_ModulNbr  CR_AREF(chanspec)          : Selected module number   |
+|  unsigned char_ b_ModulNbr  CR_AREF(chanspec)          : Selected module number   |
 |                                                   (0 to 3)                 |
-|  BYTE_ b_InputChannel CR_CHAN(chanspec)        : Selection from digital   |
+|  unsigned char_ b_InputChannel CR_CHAN(chanspec)        : Selection from digital   |
 |                                                   input ( 0 to 6)          |
 |                                                      0 : Channel C         |
 |                                                      1 : Channel D         |
@@ -288,22 +288,22 @@ INT i_APCI1710_InsnConfigDigitalIO(struct comedi_device * dev, struct comedi_sub
 +----------------------------------------------------------------------------+
 */
 
-//_INT_   i_APCI1710_ReadDigitalIOChlValue      (BYTE_    b_BoardHandle,
-//                                             BYTE_    b_ModulNbr,
-//                                             BYTE_    b_InputChannel,
-//
-//                                             PBYTE_  pb_ChannelStatus)
-INT i_APCI1710_InsnReadDigitalIOChlValue(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+/* _INT_   i_APCI1710_ReadDigitalIOChlValue      (unsigned char_    b_BoardHandle, */
+/*
+* unsigned char_ b_ModulNbr, unsigned char_ b_InputChannel,
+* unsigned char *_ pb_ChannelStatus)
+*/
+int i_APCI1710_InsnReadDigitalIOChlValue(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_StatusReg;
-	BYTE b_ModulNbr, b_InputChannel;
-	PBYTE pb_ChannelStatus;
-	b_ModulNbr = (BYTE) CR_AREF(insn->chanspec);
-	b_InputChannel = (BYTE) CR_CHAN(insn->chanspec);
+	int i_ReturnValue = 0;
+	unsigned int dw_StatusReg;
+	unsigned char b_ModulNbr, b_InputChannel;
+	unsigned char *pb_ChannelStatus;
+	b_ModulNbr = (unsigned char) CR_AREF(insn->chanspec);
+	b_InputChannel = (unsigned char) CR_CHAN(insn->chanspec);
 	data[0] = 0;
-	pb_ChannelStatus = (PBYTE) & data[0];
+	pb_ChannelStatus = (unsigned char *) &data[0];
 	i_ReturnValue = insn->n;
 
 	/**************************/
@@ -356,7 +356,7 @@ INT i_APCI1710_InsnReadDigitalIOChlValue(struct comedi_device * dev,
 								i_ReturnValue =
 									-6;
 							}
-						}	// if (b_InputChannel == 5)
+						}	/*  if (b_InputChannel == 5) */
 						else {
 			  /***************************/
 							/* Test the channel B mode */
@@ -375,8 +375,8 @@ INT i_APCI1710_InsnReadDigitalIOChlValue(struct comedi_device * dev,
 								i_ReturnValue =
 									-7;
 							}
-						}	// if (b_InputChannel == 5)
-					}	// if (b_InputChannel > 4)
+						}	/*  if (b_InputChannel == 5) */
+					}	/*  if (b_InputChannel > 4) */
 
 		    /***********************/
 					/* Test if error occur */
@@ -387,11 +387,10 @@ INT i_APCI1710_InsnReadDigitalIOChlValue(struct comedi_device * dev,
 						/* Read all digital input */
 		       /**************************/
 
-						//INPDW (ps_APCI1710Variable->
-						//   s_Board [b_BoardHandle].
-						//   s_BoardInfos.
-						//  ui_Address + (64 * b_ModulNbr),
-						// &dw_StatusReg);
+/*
+* INPDW (ps_APCI1710Variable-> s_Board [b_BoardHandle].
+* s_BoardInfos. ui_Address + (64 * b_ModulNbr), &dw_StatusReg);
+*/
 
 						dw_StatusReg =
 							inl(devpriv->
@@ -400,11 +399,11 @@ INT i_APCI1710_InsnReadDigitalIOChlValue(struct comedi_device * dev,
 							(64 * b_ModulNbr));
 
 						*pb_ChannelStatus =
-							(BYTE) ((dw_StatusReg ^
+							(unsigned char) ((dw_StatusReg ^
 								0x1C) >>
 							b_InputChannel) & 1;
 
-					}	// if (i_ReturnValue == 0)
+					}	/*  if (i_ReturnValue == 0) */
 				} else {
 		    /*******************************/
 					/* Digital I/O not initialised */
@@ -434,7 +433,7 @@ INT i_APCI1710_InsnReadDigitalIOChlValue(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
@@ -445,7 +444,7 @@ INT i_APCI1710_InsnReadDigitalIOChlValue(struct comedi_device * dev,
 
 /*
 +----------------------------------------------------------------------------+
-| Function Name     : INT i_APCI1710_InsnWriteDigitalIOChlOnOff(comedi_device
+| Function Name     : int i_APCI1710_InsnWriteDigitalIOChlOnOff(comedi_device
 |*dev,struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data)
 
 +----------------------------------------------------------------------------+
@@ -453,9 +452,9 @@ INT i_APCI1710_InsnReadDigitalIOChlValue(struct comedi_device * dev,
 |                     parameter b_Channel. Setting an output means setting   |
 |                     an ouput high.                                         |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle   : Handle of board APCI-1710      |
-|                     BYTE_ b_ModulNbr (aref )    : Selected module number (0 to 3)|
-|                     BYTE_ b_OutputChannel (CR_CHAN) : Selection from digital output  |
+| Input Parameters  : unsigned char_ b_BoardHandle   : Handle of board APCI-1710      |
+|                     unsigned char_ b_ModulNbr (aref )    : Selected module number (0 to 3)|
+|                     unsigned char_ b_OutputChannel (CR_CHAN) : Selection from digital output  |
 |                                             channel (0 to 2)               |
 |                                                0 : Channel H               |
 |                                                1 : Channel A               |
@@ -478,15 +477,16 @@ INT i_APCI1710_InsnReadDigitalIOChlValue(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-//_INT_   i_APCI1710_SetDigitalIOChlOn    (BYTE_ b_BoardHandle,
-//                                       BYTE_ b_ModulNbr,
-//                                       BYTE_ b_OutputChannel)
-INT i_APCI1710_InsnWriteDigitalIOChlOnOff(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+/*
+* _INT_ i_APCI1710_SetDigitalIOChlOn (unsigned char_ b_BoardHandle,
+* unsigned char_ b_ModulNbr, unsigned char_ b_OutputChannel)
+*/
+int i_APCI1710_InsnWriteDigitalIOChlOnOff(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_WriteValue = 0;
-	BYTE b_ModulNbr, b_OutputChannel;
+	int i_ReturnValue = 0;
+	unsigned int dw_WriteValue = 0;
+	unsigned char b_ModulNbr, b_OutputChannel;
 	i_ReturnValue = insn->n;
 	b_ModulNbr = CR_AREF(insn->chanspec);
 	b_OutputChannel = CR_CHAN(insn->chanspec);
@@ -602,7 +602,7 @@ INT i_APCI1710_InsnWriteDigitalIOChlOnOff(struct comedi_device * dev,
 								1 <<
 								b_OutputChannel;
 						}
-					}	// set channel off
+					}	/*  set channel off */
 					else {
 						if (devpriv->
 							s_ModuleInfo
@@ -627,23 +627,24 @@ INT i_APCI1710_InsnWriteDigitalIOChlOnOff(struct comedi_device * dev,
 								dw_OutputMemory
 								= dw_WriteValue;
 						} else {
-		       /*****************************/
+							/*****************************/
 							/* Digital Output Memory OFF */
-		       /*****************************/
-							// +Use previously the function "i_APCI1710_SetDigitalIOMemoryOn"
+							/*****************************/
+							/*  +Use previously the function "i_APCI1710_SetDigitalIOMemoryOn" */
 							i_ReturnValue = -8;
 						}
 
 					}
-		    /*******************/
+					/*******************/
 					/* Write the value */
-		    /*******************/
+					/*******************/
 
-					//OUTPDW (ps_APCI1710Variable->
-					//    s_Board [b_BoardHandle].
-					//   s_BoardInfos.
-					//   ui_Address + (64 * b_ModulNbr),
-					//   dw_WriteValue);
+					/* OUTPDW (ps_APCI1710Variable->
+					 * s_Board [b_BoardHandle].
+					 * s_BoardInfos. ui_Address + (64 * b_ModulNbr),
+					 * dw_WriteValue);
+					 */
+*/
 					outl(dw_WriteValue,
 						devpriv->s_BoardInfos.
 						ui_Address + (64 * b_ModulNbr));
@@ -670,7 +671,7 @@ INT i_APCI1710_InsnWriteDigitalIOChlOnOff(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
@@ -690,19 +691,19 @@ INT i_APCI1710_InsnWriteDigitalIOChlOnOff(struct comedi_device * dev,
 |                     from selected digital I/O module (b_ModulNbr)
 +----------------------------------------------------------------------------+
 | Input Parameters  :
-	BYTE_ b_BoardHandle   : Handle of board APCI-1710      |
-|   BYTE_ b_ModulNbr  CR_AREF(aref)    : Selected module number (0 to 3)|
-|   BYTE_ b_PortValue CR_CHAN(chanspec) : Output Value ( 0 To 7 )
+	unsigned char_ b_BoardHandle   : Handle of board APCI-1710      |
+|   unsigned char_ b_ModulNbr  CR_AREF(aref)    : Selected module number (0 to 3)|
+|   unsigned char_ b_PortValue CR_CHAN(chanspec) : Output Value ( 0 To 7 )
 |                       data[0]           read or write port
-                        data[1]            if write then indicate ON or OFF
+|                       data[1]            if write then indicate ON or OFF
 
-                        if read : data[1] will return port status.
+|                       if read : data[1] will return port status.
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
 +----------------------------------------------------------------------------+
 | Return Value      :
 
-                INPUT :
+|                INPUT :
 
 					  0: No error                                            |
 |                    -1: The handle parameter of the board is wrong          |
@@ -725,75 +726,78 @@ INT i_APCI1710_InsnWriteDigitalIOChlOnOff(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-//_INT_   i_APCI1710_SetDigitalIOPortOn   (BYTE_ b_BoardHandle,
-//                                       BYTE_ b_ModulNbr,
-//                                       BYTE_ b_PortValue)
-INT i_APCI1710_InsnBitsDigitalIOPortOnOff(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+/*
+ * _INT_ i_APCI1710_SetDigitalIOPortOn (unsigned char_
+ * b_BoardHandle, unsigned char_ b_ModulNbr, unsigned char_
+ * b_PortValue)
+*/
+int i_APCI1710_InsnBitsDigitalIOPortOnOff(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_WriteValue = 0;
-	DWORD dw_StatusReg;
-	BYTE b_ModulNbr, b_PortValue;
-	BYTE b_PortOperation, b_PortOnOFF;
-
-	PBYTE pb_PortValue;
-
-	b_ModulNbr = (BYTE) CR_AREF(insn->chanspec);
-	b_PortOperation = (BYTE) data[0];	// Input or output
-	b_PortOnOFF = (BYTE) data[1];	// if output then On or Off
-	b_PortValue = (BYTE) data[2];	// if out put then Value
+	int i_ReturnValue = 0;
+	unsigned int dw_WriteValue = 0;
+	unsigned int dw_StatusReg;
+	unsigned char b_ModulNbr, b_PortValue;
+	unsigned char b_PortOperation, b_PortOnOFF;
+
+	unsigned char *pb_PortValue;
+
+	b_ModulNbr = (unsigned char) CR_AREF(insn->chanspec);
+	b_PortOperation = (unsigned char) data[0];	/*  Input or output */
+	b_PortOnOFF = (unsigned char) data[1];	/*  if output then On or Off */
+	b_PortValue = (unsigned char) data[2];	/*  if out put then Value */
 	i_ReturnValue = insn->n;
-	pb_PortValue = (PBYTE) & data[0];
-// if input then read value
+	pb_PortValue = (unsigned char *) &data[0];
+/* if input then read value */
 
 	switch (b_PortOperation) {
 	case APCI1710_INPUT:
-	/**************************/
+		/**************************/
 		/* Test the module number */
-	/**************************/
+		/**************************/
 
 		if (b_ModulNbr < 4) {
-	   /*******************************/
+			/*******************************/
 			/* Test if digital I/O counter */
-	   /*******************************/
+			/*******************************/
 
 			if ((devpriv->s_BoardInfos.
 					dw_MolduleConfiguration[b_ModulNbr] &
 					0xFFFF0000UL) == APCI1710_DIGITAL_IO) {
-	      /**********************************************/
+				/**********************************************/
 				/* Test if the digital I/O module initialised */
-	      /**********************************************/
+				/**********************************************/
 
 				if (devpriv->s_ModuleInfo[b_ModulNbr].
 					s_DigitalIOInfo.b_DigitalInit == 1) {
-		 /**************************/
+					/**************************/
 					/* Read all digital input */
-		 /**************************/
+					/**************************/
 
-					//INPDW (ps_APCI1710Variable->
-					//      s_Board [b_BoardHandle].
-					//      s_BoardInfos.
-					//      ui_Address + (64 * b_ModulNbr),
-					//      &dw_StatusReg);
+					/* INPDW (ps_APCI1710Variable->
+					 * s_Board [b_BoardHandle].
+					 * s_BoardInfos.
+					 * ui_Address + (64 * b_ModulNbr),
+					 * &dw_StatusReg);
+					 */
 
 					dw_StatusReg =
 						inl(devpriv->s_BoardInfos.
 						ui_Address + (64 * b_ModulNbr));
 					*pb_PortValue =
-						(BYTE) (dw_StatusReg ^ 0x1C);
+						(unsigned char) (dw_StatusReg ^ 0x1C);
 
 				} else {
-		 /*******************************/
+					/*******************************/
 					/* Digital I/O not initialised */
-		 /*******************************/
+					/*******************************/
 
 					i_ReturnValue = -4;
 				}
 			} else {
-	      /******************************************/
+				/******************************************/
 				/* The module is not a digital I/O module */
-	      /******************************************/
+				/******************************************/
 
 				i_ReturnValue = -3;
 			}
@@ -853,11 +857,11 @@ INT i_APCI1710_InsnBitsDigitalIOPortOnOff(struct comedi_device * dev,
 								i_ReturnValue =
 									-6;
 							}
-						}	// if ((b_PortValue & 2) == 2)
+						}	/*  if ((b_PortValue & 2) == 2) */
 
-		    /**************************/
+						/**************************/
 						/* Test if channel B used */
-		    /**************************/
+						/**************************/
 
 						if ((b_PortValue & 4) == 4) {
 							if (devpriv->
@@ -866,33 +870,33 @@ INT i_APCI1710_InsnBitsDigitalIOPortOnOff(struct comedi_device * dev,
 								s_DigitalIOInfo.
 								b_ChannelBMode
 								!= 1) {
-			  /*******************************************/
+								/*******************************************/
 								/* The digital channel B is used for input */
-			  /*******************************************/
+								/*******************************************/
 
 								i_ReturnValue =
 									-7;
 							}
-						}	// if ((b_PortValue & 4) == 4)
+						}	/*  if ((b_PortValue & 4) == 4) */
 
-		    /***********************/
+						/***********************/
 						/* Test if error occur */
-		    /***********************/
+						/***********************/
 
 						if (i_ReturnValue >= 0) {
 
-							//if(data[1])
-							//{
+							/* if(data[1]) { */
+
 							switch (b_PortOnOFF) {
-			   /*********************************/
+								/*********************************/
 								/* Test if set Port ON                   */
-		       /*********************************/
+								/*********************************/
 
 							case APCI1710_ON:
 
-		       /*********************************/
+								/*********************************/
 								/* Test if output memory enabled */
-		       /*********************************/
+								/*********************************/
 
 								if (devpriv->
 									s_ModuleInfo
@@ -924,7 +928,7 @@ INT i_APCI1710_InsnBitsDigitalIOPortOnOff(struct comedi_device * dev,
 								}
 								break;
 
-								// If Set PORT  OFF
+								/*  If Set PORT  OFF */
 							case APCI1710_OFF:
 
 			   /*********************************/
@@ -957,25 +961,26 @@ INT i_APCI1710_InsnBitsDigitalIOPortOnOff(struct comedi_device * dev,
 										=
 										dw_WriteValue;
 								} else {
-			  /*****************************/
+									/*****************************/
 									/* Digital Output Memory OFF */
-			  /*****************************/
+									/*****************************/
 
 									i_ReturnValue
 										=
 										-8;
 								}
-							}	// switch
+							}	/*  switch */
 
-		       /*******************/
+							/*******************/
 							/* Write the value */
-		       /*******************/
+							/*******************/
+
+							/* OUTPDW (ps_APCI1710Variable->
+							 * s_Board [b_BoardHandle].
+							 * s_BoardInfos.
+							 * ui_Address + (64 * b_ModulNbr),
+							 * dw_WriteValue); */
 
-							//  OUTPDW (ps_APCI1710Variable->
-							//      s_Board [b_BoardHandle].
-							//      s_BoardInfos.
-							//      ui_Address + (64 * b_ModulNbr),
-							//      dw_WriteValue);
 							outl(dw_WriteValue,
 								devpriv->
 								s_BoardInfos.
@@ -983,16 +988,16 @@ INT i_APCI1710_InsnBitsDigitalIOPortOnOff(struct comedi_device * dev,
 								(64 * b_ModulNbr));
 						}
 					} else {
-		    /**********************/
+						/**********************/
 						/* Output value wrong */
-		    /**********************/
+						/**********************/
 
 						i_ReturnValue = -4;
 					}
 				} else {
-		 /*******************************/
+					/*******************************/
 					/* Digital I/O not initialised */
-		 /*******************************/
+					/*******************************/
 
 					i_ReturnValue = -5;
 				}
@@ -1015,6 +1020,6 @@ INT i_APCI1710_InsnBitsDigitalIOPortOnOff(struct comedi_device * dev,
 	default:
 		i_ReturnValue = -9;
 		DPRINTK("NO INPUT/OUTPUT specified\n");
-	}			//switch INPUT / OUTPUT
-	return (i_ReturnValue);
+	}			/* switch INPUT / OUTPUT */
+	return i_ReturnValue;
 }
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.h
index 5ef157a55ca..af1b9cdecfb 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.h
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.h
@@ -27,20 +27,20 @@
 /*
  * DIGITAL I/O INISIALISATION FUNCTION
  */
-INT i_APCI1710_InsnConfigDigitalIO(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI1710_InsnConfigDigitalIO(struct comedi_device *dev, struct comedi_subdevice *s,
 				   struct comedi_insn *insn, unsigned int *data);
 
 /*
  * INPUT OUTPUT  FUNCTIONS
  */
-INT i_APCI1710_InsnReadDigitalIOChlValue(struct comedi_device *dev,
+int i_APCI1710_InsnReadDigitalIOChlValue(struct comedi_device *dev,
 					 struct comedi_subdevice *s,
 					 struct comedi_insn *insn, unsigned int *data);
 
-INT i_APCI1710_InsnWriteDigitalIOChlOnOff(struct comedi_device *dev,
+int i_APCI1710_InsnWriteDigitalIOChlOnOff(struct comedi_device *dev,
 					  struct comedi_subdevice *s,
 					  struct comedi_insn *insn, unsigned int *data);
 
-INT i_APCI1710_InsnBitsDigitalIOPortOnOff(struct comedi_device *dev,
+int i_APCI1710_InsnBitsDigitalIOPortOnOff(struct comedi_device *dev,
 					  struct comedi_subdevice *s,
 					  struct comedi_insn *insn, unsigned int *data);
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.c
index 1062f2fdec3..6c092efee7b 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.c
@@ -3,13 +3,13 @@
 
 Copyright (C) 2004,2005  ADDI-DATA GmbH for the source code of this module.
 
-        ADDI-DATA GmbH
-        Dieselstrasse 3
-        D-77833 Ottersweier
-        Tel: +19(0)7223/9493-0
-        Fax: +49(0)7223/9493-92
-        http://www.addi-data-com
-        info@addi-data.com
+	ADDI-DATA GmbH
+	Dieselstrasse 3
+	D-77833 Ottersweier
+	Tel: +19(0)7223/9493-0
+	Fax: +49(0)7223/9493-92
+	http://www.addi-data-com
+	info@addi-data.com
 
 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
 
@@ -61,7 +61,7 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 
 /*
 +----------------------------------------------------------------------------+
-| INT	i_APCI1710_InsnConfigINCCPT(struct comedi_device *dev,struct comedi_subdevice *s,
+| int	i_APCI1710_InsnConfigINCCPT(struct comedi_device *dev,struct comedi_subdevice *s,
 struct comedi_insn *insn,unsigned int *data)
 
 +----------------------------------------------------------------------------+
@@ -75,58 +75,58 @@ struct comedi_insn *insn,unsigned int *data)
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InsnConfigINCCPT(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnConfigINCCPT(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_ConfigType;
-	INT i_ReturnValue = 0;
+	unsigned int ui_ConfigType;
+	int i_ReturnValue = 0;
 	ui_ConfigType = CR_CHAN(insn->chanspec);
 
 	printk("\nINC_CPT");
 
-	devpriv->tsk_Current = current;	// Save the current process task structure
+	devpriv->tsk_Current = current;	/*  Save the current process task structure */
 	switch (ui_ConfigType) {
 	case APCI1710_INCCPT_INITCOUNTER:
 		i_ReturnValue = i_APCI1710_InitCounter(dev,
 			CR_AREF(insn->chanspec),
-			(BYTE) data[0],
-			(BYTE) data[1],
-			(BYTE) data[2], (BYTE) data[3], (BYTE) data[4]);
+			(unsigned char) data[0],
+			(unsigned char) data[1],
+			(unsigned char) data[2], (unsigned char) data[3], (unsigned char) data[4]);
 		break;
 
 	case APCI1710_INCCPT_COUNTERAUTOTEST:
 		i_ReturnValue = i_APCI1710_CounterAutoTest(dev,
-			(PBYTE) & data[0]);
+			(unsigned char *) &data[0]);
 		break;
 
 	case APCI1710_INCCPT_INITINDEX:
 		i_ReturnValue = i_APCI1710_InitIndex(dev,
 			CR_AREF(insn->chanspec),
-			(BYTE) data[0],
-			(BYTE) data[1], (BYTE) data[2], (BYTE) data[3]);
+			(unsigned char) data[0],
+			(unsigned char) data[1], (unsigned char) data[2], (unsigned char) data[3]);
 		break;
 
 	case APCI1710_INCCPT_INITREFERENCE:
 		i_ReturnValue = i_APCI1710_InitReference(dev,
-			CR_AREF(insn->chanspec), (BYTE) data[0]);
+			CR_AREF(insn->chanspec), (unsigned char) data[0]);
 		break;
 
 	case APCI1710_INCCPT_INITEXTERNALSTROBE:
 		i_ReturnValue = i_APCI1710_InitExternalStrobe(dev,
 			CR_AREF(insn->chanspec),
-			(BYTE) data[0], (BYTE) data[1]);
+			(unsigned char) data[0], (unsigned char) data[1]);
 		break;
 
 	case APCI1710_INCCPT_INITCOMPARELOGIC:
 		i_ReturnValue = i_APCI1710_InitCompareLogic(dev,
-			CR_AREF(insn->chanspec), (UINT) data[0]);
+			CR_AREF(insn->chanspec), (unsigned int) data[0]);
 		break;
 
 	case APCI1710_INCCPT_INITFREQUENCYMEASUREMENT:
 		i_ReturnValue = i_APCI1710_InitFrequencyMeasurement(dev,
 			CR_AREF(insn->chanspec),
-			(BYTE) data[0],
-			(BYTE) data[1], (ULONG) data[2], (PULONG) & data[0]);
+			(unsigned char) data[0],
+			(unsigned char) data[1], (unsigned int) data[2], (unsigned int *) &data[0]);
 		break;
 
 	default:
@@ -136,19 +136,19 @@ INT i_APCI1710_InsnConfigINCCPT(struct comedi_device * dev, struct comedi_subdev
 
 	if (i_ReturnValue >= 0)
 		i_ReturnValue = insn->n;
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_InitCounter                           |
-|                               (BYTE_          b_BoardHandle,               |
-|                                BYTE_          b_ModulNbr,                  |
-|                                BYTE_          b_CounterRange,              |
-|                                BYTE_          b_FirstCounterModus,         |
-|                                BYTE_          b_FirstCounterOption,        |
-|                                BYTE_          b_SecondCounterModus,        |
-|                                BYTE_          b_SecondCounterOption)       |
+|                               (unsigned char_          b_BoardHandle,               |
+|                                unsigned char_          b_ModulNbr,                  |
+|                                unsigned char_          b_CounterRange,              |
+|                                unsigned char_          b_FirstCounterModus,         |
+|                                unsigned char_          b_FirstCounterOption,        |
+|                                unsigned char_          b_SecondCounterModus,        |
+|                                unsigned char_          b_SecondCounterOption)       |
 +----------------------------------------------------------------------------+
 | Task              : Configure the counter operating mode from selected     |
 |                     module (b_ModulNbr). You must calling this function be |
@@ -273,17 +273,17 @@ INT i_APCI1710_InsnConfigINCCPT(struct comedi_device * dev, struct comedi_subdev
 | +----------------------+--------------------+----------------------------+ |
 |                                                                            |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle         : Handle of board APCI-1710|
-|                     BYTE_ b_ModulNbr            : Module number to         |
+| Input Parameters  : unsigned char_ b_BoardHandle         : Handle of board APCI-1710|
+|                     unsigned char_ b_ModulNbr            : Module number to         |
 |                                                   configure (0 to 3)       |
-|                     BYTE_ b_CounterRange        : Selection form counter   |
+|                     unsigned char_ b_CounterRange        : Selection form counter   |
 |                                                   range.                   |
-|                     BYTE_ b_FirstCounterModus   : First counter operating  |
+|                     unsigned char_ b_FirstCounterModus   : First counter operating  |
 |                                                   mode.                    |
-|                     BYTE_ b_FirstCounterOption  : First counter  option.   |
-|                     BYTE_ b_SecondCounterModus  : Second counter operating |
+|                     unsigned char_ b_FirstCounterOption  : First counter  option.   |
+|                     unsigned char_ b_SecondCounterModus  : Second counter operating |
 |                                                   mode.                    |
-|                     BYTE_ b_SecondCounterOption : Second counter  option.  |
+|                     unsigned char_ b_SecondCounterOption : Second counter  option.  |
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
 +----------------------------------------------------------------------------+
@@ -299,14 +299,14 @@ INT i_APCI1710_InsnConfigINCCPT(struct comedi_device * dev, struct comedi_subdev
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InitCounter(struct comedi_device * dev,
-	BYTE b_ModulNbr,
-	BYTE b_CounterRange,
-	BYTE b_FirstCounterModus,
-	BYTE b_FirstCounterOption,
-	BYTE b_SecondCounterModus, BYTE b_SecondCounterOption)
+int i_APCI1710_InitCounter(struct comedi_device *dev,
+	unsigned char b_ModulNbr,
+	unsigned char b_CounterRange,
+	unsigned char b_FirstCounterModus,
+	unsigned char b_FirstCounterOption,
+	unsigned char b_SecondCounterModus, unsigned char b_SecondCounterOption)
 {
-	INT i_ReturnValue = 0;
+	int i_ReturnValue = 0;
 
 	/*******************************/
 	/* Test if incremental counter */
@@ -502,14 +502,14 @@ INT i_APCI1710_InitCounter(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_CounterAutoTest                       |
-|                                               (BYTE_     b_BoardHandle,    |
-|                                                PBYTE_   pb_TestStatus)     |
+|                                               (unsigned char_     b_BoardHandle,    |
+|                                                unsigned char *_   pb_TestStatus)     |
 +----------------------------------------------------------------------------+
 | Task              : A test mode is intended for testing the component and  |
 |                     the connected periphery. All the 8-bit counter chains  |
@@ -535,9 +535,9 @@ INT i_APCI1710_InitCounter(struct comedi_device * dev,
 |              |    1000         | Error detected of counter 3 |             |
 |              +-----------------+-----------------------------+             |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_   b_BoardHandle : Handle of board APCI-1710      |  |
+| Input Parameters  : unsigned char_   b_BoardHandle : Handle of board APCI-1710      |  |
 +----------------------------------------------------------------------------+
-| Output Parameters : PBYTE_ pb_TestStatus  : Auto test conclusion. See table|
+| Output Parameters : unsigned char *_ pb_TestStatus  : Auto test conclusion. See table|
 +----------------------------------------------------------------------------+
 | Return Value      :  0: No error                                           |
 |                     -1: The handle parameter of the board is wrong         |
@@ -545,11 +545,11 @@ INT i_APCI1710_InitCounter(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_CounterAutoTest(struct comedi_device * dev, PBYTE pb_TestStatus)
+int i_APCI1710_CounterAutoTest(struct comedi_device *dev, unsigned char *pb_TestStatus)
 {
-	BYTE b_ModulCpt = 0;
-	INT i_ReturnValue = 0;
-	DWORD dw_LathchValue;
+	unsigned char b_ModulCpt = 0;
+	int i_ReturnValue = 0;
+	unsigned int dw_LathchValue;
 
 	*pb_TestStatus = 0;
 
@@ -627,17 +627,17 @@ INT i_APCI1710_CounterAutoTest(struct comedi_device * dev, PBYTE pb_TestStatus)
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
-| Function Name     : _INT_ i_APCI1710_InitIndex (BYTE_ b_BoardHandle,       |
-|                                                 BYTE_ b_ModulNbr,          |
-|                                                 BYTE_ b_ReferenceAction,   |
-|                                                 BYTE_ b_IndexOperation,    |
-|                                                 BYTE_ b_AutoMode,          |
-|                                                 BYTE_ b_InterruptEnable)   |
+| Function Name     : _INT_ i_APCI1710_InitIndex (unsigned char_ b_BoardHandle,       |
+|                                                 unsigned char_ b_ModulNbr,          |
+|                                                 unsigned char_ b_ReferenceAction,   |
+|                                                 unsigned char_ b_IndexOperation,    |
+|                                                 unsigned char_ b_AutoMode,          |
+|                                                 unsigned char_ b_InterruptEnable)   |
 +----------------------------------------------------------------------------+
 | Task              : Initialise the index corresponding to the selected     |
 |                     module (b_ModulNbr). If a INDEX flag occur, you have   |
@@ -665,10 +665,10 @@ INT i_APCI1710_CounterAutoTest(struct comedi_device * dev, PBYTE pb_TestStatus)
 |           |                        | value is cleared (32-Bit)          |  |
 |           +------------------------+------------------------------------+  |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle     : Handle of board APCI-1710    |
-|                     BYTE_ b_ModulNbr        : Module number to configure   |
+| Input Parameters  : unsigned char_ b_BoardHandle     : Handle of board APCI-1710    |
+|                     unsigned char_ b_ModulNbr        : Module number to configure   |
 |                                               (0 to 3)                     |
-|                     BYTE_ b_ReferenceAction : Determine if the reference   |
+|                     unsigned char_ b_ReferenceAction : Determine if the reference   |
 |                                               must set or no for the       |
 |                                               acceptance from index        |
 |                                               APCI1710_ENABLE :            |
@@ -677,15 +677,15 @@ INT i_APCI1710_CounterAutoTest(struct comedi_device * dev, PBYTE pb_TestStatus)
 |                                               APCI1710_DISABLE :           |
 |                                                  Reference have not        |
 |                                                  importance                |
-|                     BYTE_ b_IndexOperation  : Index operating mode.        |
+|                     unsigned char_ b_IndexOperation  : Index operating mode.        |
 |                                               See table.                   |
-|                     BYTE_ b_AutoMode        : Enable or disable the        |
+|                     unsigned char_ b_AutoMode        : Enable or disable the        |
 |                                               automatic index reset.       |
 |                                               APCI1710_ENABLE :            |
 |                                                 Enable the automatic mode  |
 |                                               APCI1710_DISABLE :           |
 |                                                 Disable the automatic mode |
-|                     BYTE_ b_InterruptEnable : Enable or disable the        |
+|                     unsigned char_ b_InterruptEnable : Enable or disable the        |
 |                                               interrupt.                   |
 |                                               APCI1710_ENABLE :            |
 |                                               Enable the interrupt         |
@@ -708,12 +708,12 @@ INT i_APCI1710_CounterAutoTest(struct comedi_device * dev, PBYTE pb_TestStatus)
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InitIndex(struct comedi_device * dev,
-	BYTE b_ModulNbr,
-	BYTE b_ReferenceAction,
-	BYTE b_IndexOperation, BYTE b_AutoMode, BYTE b_InterruptEnable)
+int i_APCI1710_InitIndex(struct comedi_device *dev,
+	unsigned char b_ModulNbr,
+	unsigned char b_ReferenceAction,
+	unsigned char b_IndexOperation, unsigned char b_AutoMode, unsigned char b_InterruptEnable)
 {
-	INT i_ReturnValue = 0;
+	int i_ReturnValue = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -902,7 +902,7 @@ INT i_APCI1710_InitIndex(struct comedi_device * dev,
 									b_ModeRegister4
 									|
 									APCI1710_ENABLE_LATCH_AND_CLEAR;
-							}	// if (b_IndexOperation == APCI1710_HIGH_EDGE_LATCH_AND_CLEAR_COUNTER || b_IndexOperation == APCI1710_LOW_EDGE_LATCH_AND_CLEAR_COUNTER)
+							}	/*  if (b_IndexOperation == APCI1710_HIGH_EDGE_LATCH_AND_CLEAR_COUNTER || b_IndexOperation == APCI1710_LOW_EDGE_LATCH_AND_CLEAR_COUNTER) */
 							else {
 				/*****************************************/
 								/* Clear the latch and clear flag (DQ27) */
@@ -975,7 +975,7 @@ INT i_APCI1710_InitIndex(struct comedi_device * dev,
 										&
 										(~APCI1710_INDEX_LATCH_COUNTER);
 								}
-							}	// // if (b_IndexOperation == APCI1710_HIGH_EDGE_LATCH_AND_CLEAR_COUNTER || b_IndexOperation == APCI1710_LOW_EDGE_LATCH_AND_CLEAR_COUNTER)
+							}	/*  // if (b_IndexOperation == APCI1710_HIGH_EDGE_LATCH_AND_CLEAR_COUNTER || b_IndexOperation == APCI1710_LOW_EDGE_LATCH_AND_CLEAR_COUNTER) */
 
 							if (b_AutoMode ==
 								APCI1710_DISABLE)
@@ -1113,15 +1113,15 @@ INT i_APCI1710_InitIndex(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_InitReference                         |
-|                                                (BYTE_ b_BoardHandle,       |
-|                                                 BYTE_ b_ModulNbr,          |
-|                                                 BYTE_ b_ReferenceLevel)    |
+|                                                (unsigned char_ b_BoardHandle,       |
+|                                                 unsigned char_ b_ModulNbr,          |
+|                                                 unsigned char_ b_ReferenceLevel)    |
 +----------------------------------------------------------------------------+
 | Task              : Initialise the reference corresponding to the selected |
 |                     module (b_ModulNbr).                                   |
@@ -1136,10 +1136,10 @@ INT i_APCI1710_InitIndex(struct comedi_device * dev,
 |             |   APCI1710_HIGH    |  Reference occur if "1" |               |
 |             +--------------------+-------------------------+               |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle     : Handle of board APCI-1710    |
-|                     BYTE_ b_ModulNbr        : Module number to configure   |
+| Input Parameters  : unsigned char_ b_BoardHandle     : Handle of board APCI-1710    |
+|                     unsigned char_ b_ModulNbr        : Module number to configure   |
 |                                               (0 to 3)                     |
-|                     BYTE_ b_ReferenceLevel  : Reference level.             |
+|                     unsigned char_ b_ReferenceLevel  : Reference level.             |
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
 +----------------------------------------------------------------------------+
@@ -1152,10 +1152,10 @@ INT i_APCI1710_InitIndex(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InitReference(struct comedi_device * dev,
-	BYTE b_ModulNbr, BYTE b_ReferenceLevel)
+int i_APCI1710_InitReference(struct comedi_device *dev,
+	unsigned char b_ModulNbr, unsigned char b_ReferenceLevel)
 {
-	INT i_ReturnValue = 0;
+	int i_ReturnValue = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -1239,27 +1239,27 @@ INT i_APCI1710_InitReference(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_	i_APCI1710_InitExternalStrobe                |
-|					(BYTE_ b_BoardHandle,                |
-|					 BYTE_ b_ModulNbr,                   |
-|					 BYTE_ b_ExternalStrobe,             |
-|					 BYTE_ b_ExternalStrobeLevel)        |
+|					(unsigned char_ b_BoardHandle,                |
+|					 unsigned char_ b_ModulNbr,                   |
+|					 unsigned char_ b_ExternalStrobe,             |
+|					 unsigned char_ b_ExternalStrobeLevel)        |
 +----------------------------------------------------------------------------+
 | Task              : Initialises the external strobe level corresponding to |
 |		      the selected module (b_ModulNbr).                      |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle     : Handle of board APCI-1710    |
-|                     BYTE_ b_ModulNbr        : Module number to configure   |
+| Input Parameters  : unsigned char_ b_BoardHandle     : Handle of board APCI-1710    |
+|                     unsigned char_ b_ModulNbr        : Module number to configure   |
 |                                               (0 to 3)                     |
-|		      BYTE_ b_ExternalStrobe  : External strobe selection    |
+|		      unsigned char_ b_ExternalStrobe  : External strobe selection    |
 |						0 : External strobe A        |
 |						1 : External strobe B        |
-|		      BYTE_ b_ExternalStrobeLevel : External strobe level    |
+|		      unsigned char_ b_ExternalStrobeLevel : External strobe level    |
 |						APCI1710_LOW :               |
 |						External latch occurs if "0" |
 |						APCI1710_HIGH :              |
@@ -1277,10 +1277,10 @@ INT i_APCI1710_InitReference(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InitExternalStrobe(struct comedi_device * dev,
-	BYTE b_ModulNbr, BYTE b_ExternalStrobe, BYTE b_ExternalStrobeLevel)
+int i_APCI1710_InitExternalStrobe(struct comedi_device *dev,
+	unsigned char b_ModulNbr, unsigned char b_ExternalStrobe, unsigned char b_ExternalStrobeLevel)
 {
-	INT i_ReturnValue = 0;
+	int i_ReturnValue = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -1335,7 +1335,7 @@ INT i_APCI1710_InitExternalStrobe(struct comedi_device * dev,
 					DPRINTK("External strobe level parameter is wrong\n");
 					i_ReturnValue = -5;
 				}
-			}	// if (b_ExternalStrobe == 0 || b_ExternalStrobe == 1)
+			}	/*  if (b_ExternalStrobe == 0 || b_ExternalStrobe == 1) */
 			else {
 		 /**************************************/
 				/* External strobe selection is wrong */
@@ -1343,7 +1343,7 @@ INT i_APCI1710_InitExternalStrobe(struct comedi_device * dev,
 
 				DPRINTK("External strobe selection is wrong\n");
 				i_ReturnValue = -4;
-			}	// if (b_ExternalStrobe == 0 || b_ExternalStrobe == 1)
+			}	/*  if (b_ExternalStrobe == 0 || b_ExternalStrobe == 1) */
 		} else {
 	      /****************************************/
 			/* Counter not initialised see function */
@@ -1362,24 +1362,24 @@ INT i_APCI1710_InitExternalStrobe(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 	/*
 	   +----------------------------------------------------------------------------+
 	   | Function Name     : _INT_ i_APCI1710_InitCompareLogic                      |
-	   |                               (BYTE_   b_BoardHandle,                      |
-	   |                                BYTE_   b_ModulNbr,                         |
-	   |                                UINT_  ui_CompareValue)                     |
+	   |                               (unsigned char_   b_BoardHandle,                      |
+	   |                                unsigned char_   b_ModulNbr,                         |
+	   |                                unsigned int_  ui_CompareValue)                     |
 	   +----------------------------------------------------------------------------+
 	   | Task              : Set the 32-Bit compare value. At that moment that the  |
 	   |                     incremental counter arrive to the compare value        |
 	   |                     (ui_CompareValue) a interrupt is generated.            |
 	   +----------------------------------------------------------------------------+
-	   | Input Parameters  : BYTE_  b_BoardHandle    : Handle of board APCI-1710    |
-	   |                     BYTE_  b_ModulNbr       : Module number to configure   |
+	   | Input Parameters  : unsigned char_  b_BoardHandle    : Handle of board APCI-1710    |
+	   |                     unsigned char_  b_ModulNbr       : Module number to configure   |
 	   |                                               (0 to 3)                     |
-	   |                     UINT_ ui_CompareValue   : 32-Bit compare value         |
+	   |                     unsigned int_ ui_CompareValue   : 32-Bit compare value         |
 	   +----------------------------------------------------------------------------+
 	   | Output Parameters : -
 	   +----------------------------------------------------------------------------+
@@ -1391,10 +1391,10 @@ INT i_APCI1710_InitExternalStrobe(struct comedi_device * dev,
 	   +----------------------------------------------------------------------------+
 	 */
 
-INT i_APCI1710_InitCompareLogic(struct comedi_device * dev,
-	BYTE b_ModulNbr, UINT ui_CompareValue)
+int i_APCI1710_InitCompareLogic(struct comedi_device *dev,
+	unsigned char b_ModulNbr, unsigned int ui_CompareValue)
 {
-	INT i_ReturnValue = 0;
+	int i_ReturnValue = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -1434,16 +1434,16 @@ INT i_APCI1710_InitCompareLogic(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_InitFrequencyMeasurement              |
-|				(BYTE_		 b_BoardHandle,              |
-|				 BYTE_		 b_ModulNbr,                 |
-|				 BYTE_		 b_PCIInputClock,            |
-|				 BYTE_		 b_TimingUnity,              |
+|				(unsigned char_		 b_BoardHandle,              |
+|				 unsigned char_		 b_ModulNbr,                 |
+|				 unsigned char_		 b_PCIInputClock,            |
+|				 unsigned char_		 b_TimingUnity,              |
 |				 ULONG_ 	ul_TimingInterval,           |
 |				 PULONG_       pul_RealTimingInterval)       |
 +----------------------------------------------------------------------------+
@@ -1456,10 +1456,10 @@ INT i_APCI1710_InitCompareLogic(struct comedi_device * dev,
 |		      you call up any other function which gives access to   |
 |		      the frequency measurement.                             |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_  b_BoardHandle    : Handle of board APCI-1710    |
-|		      BYTE_  b_ModulNbr	      :	Number of the module to be   |
+| Input Parameters  : unsigned char_  b_BoardHandle    : Handle of board APCI-1710    |
+|		      unsigned char_  b_ModulNbr	      :	Number of the module to be   |
 |						configured (0 to 3)          |
-|		      BYTE_  b_PCIInputClock  :	Selection of the PCI bus     |
+|		      unsigned char_  b_PCIInputClock  :	Selection of the PCI bus     |
 |						clock                        |
 |						- APCI1710_30MHZ :           |
 |						  The PC has a PCI bus clock |
@@ -1467,7 +1467,7 @@ INT i_APCI1710_InitCompareLogic(struct comedi_device * dev,
 |						- APCI1710_33MHZ :           |
 |						  The PC has a PCI bus clock |
 |						  of 33 MHz                  |
-|		      BYTE_  b_TimingUnity    : Base time unit (0 to 2)      |
+|		      unsigned char_  b_TimingUnity    : Base time unit (0 to 2)      |
 |						  0 : ns                     |
 |						  1 : æs                     |
 |						  2 : ms                     |
@@ -1487,16 +1487,16 @@ INT i_APCI1710_InitCompareLogic(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InitFrequencyMeasurement(struct comedi_device * dev,
-	BYTE b_ModulNbr,
-	BYTE b_PCIInputClock,
-	BYTE b_TimingUnity,
-	ULONG ul_TimingInterval, PULONG pul_RealTimingInterval)
+int i_APCI1710_InitFrequencyMeasurement(struct comedi_device *dev,
+	unsigned char b_ModulNbr,
+	unsigned char b_PCIInputClock,
+	unsigned char b_TimingUnity,
+	unsigned int ul_TimingInterval, unsigned int *pul_RealTimingInterval)
 {
-	INT i_ReturnValue = 0;
-	ULONG ul_TimerValue = 0;
+	int i_ReturnValue = 0;
+	unsigned int ul_TimerValue = 0;
 	double d_RealTimingInterval;
-	DWORD dw_Status = 0;
+	unsigned int dw_Status = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -1637,7 +1637,7 @@ INT i_APCI1710_InitFrequencyMeasurement(struct comedi_device * dev,
 								i_ReturnValue =
 									-7;
 							}
-						}	// if (b_PCIInputClock == APCI1710_40MHZ)
+						}	/*  if (b_PCIInputClock == APCI1710_40MHZ) */
 
 		       /***************************/
 						/* Test if not error occur */
@@ -1676,7 +1676,7 @@ INT i_APCI1710_InitFrequencyMeasurement(struct comedi_device * dev,
 										b_ModeRegister4
 										|
 										APCI1710_ENABLE_40MHZ_FREQUENCY;
-								}	// if (b_PCIInputClock == APCI1710_40MHZ)
+								}	/*  if (b_PCIInputClock == APCI1710_40MHZ) */
 								else {
 				   /**********************************/
 									/* Disable the 40MHz quarz (DQ30) */
@@ -1700,7 +1700,7 @@ INT i_APCI1710_InitFrequencyMeasurement(struct comedi_device * dev,
 										&
 										APCI1710_DISABLE_40MHZ_FREQUENCY;
 
-								}	// if (b_PCIInputClock == APCI1710_40MHZ)
+								}	/*  if (b_PCIInputClock == APCI1710_40MHZ) */
 
 			     /********************************/
 								/* Calculate the division fator */
@@ -1720,7 +1720,7 @@ INT i_APCI1710_InitFrequencyMeasurement(struct comedi_device * dev,
 
 									ul_TimerValue
 										=
-										(ULONG)
+										(unsigned int)
 										(ul_TimingInterval
 										*
 										(0.00025 * b_PCIInputClock));
@@ -1743,7 +1743,7 @@ INT i_APCI1710_InitFrequencyMeasurement(struct comedi_device * dev,
 
 									*pul_RealTimingInterval
 										=
-										(ULONG)
+										(unsigned int)
 										(ul_TimerValue
 										/
 										(0.00025 * (double)b_PCIInputClock));
@@ -1790,7 +1790,7 @@ INT i_APCI1710_InitFrequencyMeasurement(struct comedi_device * dev,
 
 									ul_TimerValue
 										=
-										(ULONG)
+										(unsigned int)
 										(ul_TimingInterval
 										*
 										(0.25 * b_PCIInputClock));
@@ -1813,7 +1813,7 @@ INT i_APCI1710_InitFrequencyMeasurement(struct comedi_device * dev,
 
 									*pul_RealTimingInterval
 										=
-										(ULONG)
+										(unsigned int)
 										(ul_TimerValue
 										/
 										(0.25 * (double)b_PCIInputClock));
@@ -1886,7 +1886,7 @@ INT i_APCI1710_InitFrequencyMeasurement(struct comedi_device * dev,
 
 									*pul_RealTimingInterval
 										=
-										(ULONG)
+										(unsigned int)
 										(ul_TimerValue
 										/
 										(250.0 * (double)b_PCIInputClock));
@@ -1949,7 +1949,7 @@ INT i_APCI1710_InitFrequencyMeasurement(struct comedi_device * dev,
 								i_ReturnValue =
 									-3;
 							}
-						}	// if (i_ReturnValue == 0)
+						}	/*  if (i_ReturnValue == 0) */
 					} else {
 		       /**********************************/
 						/* Base timing selection is wrong */
@@ -1992,12 +1992,12 @@ INT i_APCI1710_InitFrequencyMeasurement(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*########################################################################### */
 
-							//INSN BITS
+							/* INSN BITS */
 /*########################################################################### */
 
 /*
@@ -2015,18 +2015,18 @@ struct comedi_insn *insn,unsigned int *data)                   |
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InsnBitsINCCPT(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnBitsINCCPT(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_BitsType;
-	INT i_ReturnValue = 0;
+	unsigned int ui_BitsType;
+	int i_ReturnValue = 0;
 	ui_BitsType = CR_CHAN(insn->chanspec);
-	devpriv->tsk_Current = current;	// Save the current process task structure
+	devpriv->tsk_Current = current;	/*  Save the current process task structure */
 
 	switch (ui_BitsType) {
 	case APCI1710_INCCPT_CLEARCOUNTERVALUE:
 		i_ReturnValue = i_APCI1710_ClearCounterValue(dev,
-			(BYTE) CR_AREF(insn->chanspec));
+			(unsigned char) CR_AREF(insn->chanspec));
 		break;
 
 	case APCI1710_INCCPT_CLEARALLCOUNTERVALUE:
@@ -2035,28 +2035,28 @@ INT i_APCI1710_InsnBitsINCCPT(struct comedi_device * dev, struct comedi_subdevic
 
 	case APCI1710_INCCPT_SETINPUTFILTER:
 		i_ReturnValue = i_APCI1710_SetInputFilter(dev,
-			(BYTE) CR_AREF(insn->chanspec),
-			(BYTE) data[0], (BYTE) data[1]);
+			(unsigned char) CR_AREF(insn->chanspec),
+			(unsigned char) data[0], (unsigned char) data[1]);
 		break;
 
 	case APCI1710_INCCPT_LATCHCOUNTER:
 		i_ReturnValue = i_APCI1710_LatchCounter(dev,
-			(BYTE) CR_AREF(insn->chanspec), (BYTE) data[0]);
+			(unsigned char) CR_AREF(insn->chanspec), (unsigned char) data[0]);
 		break;
 
 	case APCI1710_INCCPT_SETINDEXANDREFERENCESOURCE:
 		i_ReturnValue = i_APCI1710_SetIndexAndReferenceSource(dev,
-			(BYTE) CR_AREF(insn->chanspec), (BYTE) data[0]);
+			(unsigned char) CR_AREF(insn->chanspec), (unsigned char) data[0]);
 		break;
 
 	case APCI1710_INCCPT_SETDIGITALCHLON:
 		i_ReturnValue = i_APCI1710_SetDigitalChlOn(dev,
-			(BYTE) CR_AREF(insn->chanspec));
+			(unsigned char) CR_AREF(insn->chanspec));
 		break;
 
 	case APCI1710_INCCPT_SETDIGITALCHLOFF:
 		i_ReturnValue = i_APCI1710_SetDigitalChlOff(dev,
-			(BYTE) CR_AREF(insn->chanspec));
+			(unsigned char) CR_AREF(insn->chanspec));
 		break;
 
 	default:
@@ -2065,20 +2065,20 @@ INT i_APCI1710_InsnBitsINCCPT(struct comedi_device * dev, struct comedi_subdevic
 
 	if (i_ReturnValue >= 0)
 		i_ReturnValue = insn->n;
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_ClearCounterValue                     |
-|                               (BYTE_      b_BoardHandle,                   |
-|                                BYTE_       b_ModulNbr)                     |
+|                               (unsigned char_      b_BoardHandle,                   |
+|                                unsigned char_       b_ModulNbr)                     |
 +----------------------------------------------------------------------------+
 | Task              : Clear the counter value from selected module           |
 |                     (b_ModulNbr).                                          |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle : Handle of board APCI-1710        |
-|                     BYTE_ b_ModulNbr    : Module number to configure       |
+| Input Parameters  : unsigned char_ b_BoardHandle : Handle of board APCI-1710        |
+|                     unsigned char_ b_ModulNbr    : Module number to configure       |
 |                                           (0 to 3)                         |
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
@@ -2091,9 +2091,9 @@ INT i_APCI1710_InsnBitsINCCPT(struct comedi_device * dev, struct comedi_subdevic
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_ClearCounterValue(struct comedi_device * dev, BYTE b_ModulNbr)
+int i_APCI1710_ClearCounterValue(struct comedi_device *dev, unsigned char b_ModulNbr)
 {
-	INT i_ReturnValue = 0;
+	int i_ReturnValue = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -2131,17 +2131,17 @@ INT i_APCI1710_ClearCounterValue(struct comedi_device * dev, BYTE b_ModulNbr)
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_ClearAllCounterValue                  |
-|                               (BYTE_      b_BoardHandle)                   |
+|                               (unsigned char_      b_BoardHandle)                   |
 +----------------------------------------------------------------------------+
 | Task              : Clear all counter value.                               |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle : Handle of board APCI-1710        |
+| Input Parameters  : unsigned char_ b_BoardHandle : Handle of board APCI-1710        |
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
 +----------------------------------------------------------------------------+
@@ -2151,10 +2151,10 @@ INT i_APCI1710_ClearCounterValue(struct comedi_device * dev, BYTE b_ModulNbr)
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_ClearAllCounterValue(struct comedi_device * dev)
+int i_APCI1710_ClearAllCounterValue(struct comedi_device *dev)
 {
-	BYTE b_ModulCpt = 0;
-	INT i_ReturnValue = 0;
+	unsigned char b_ModulCpt = 0;
+	int i_ReturnValue = 0;
 
 	/********************************/
 	/* Test if counter module found */
@@ -2198,24 +2198,24 @@ INT i_APCI1710_ClearAllCounterValue(struct comedi_device * dev)
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_SetInputFilter                        |
-|					(BYTE_ b_BoardHandle,                |
-|					 BYTE_ b_Module,                     |
-|					 BYTE_ b_PCIInputClock,              |
-|					 BYTE_ b_Filter)     		     |
+|					(unsigned char_ b_BoardHandle,                |
+|					 unsigned char_ b_Module,                     |
+|					 unsigned char_ b_PCIInputClock,              |
+|					 unsigned char_ b_Filter)     		     |
 +----------------------------------------------------------------------------+
 | Task              : Disable or enable the software filter from selected    |
 |		      module (b_ModulNbr). b_Filter determine the filter time|
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_  b_BoardHandle    : Handle of board APCI-1710    |
-|		      BYTE_  b_ModulNbr	      :	Number of the module to be   |
+| Input Parameters  : unsigned char_  b_BoardHandle    : Handle of board APCI-1710    |
+|		      unsigned char_  b_ModulNbr	      :	Number of the module to be   |
 |						configured (0 to 3)          |
-|		      BYTE_  b_PCIInputClock  :	Selection of the PCI bus     |
+|		      unsigned char_  b_PCIInputClock  :	Selection of the PCI bus     |
 |						clock                        |
 |						- APCI1710_30MHZ :           |
 |						  The PC has a PCI bus clock |
@@ -2226,7 +2226,7 @@ INT i_APCI1710_ClearAllCounterValue(struct comedi_device * dev)
 |						- APCI1710_40MHZ :           |
 |						  The APCI1710 has a 40MHz    |
 |						  quartz		     |
-|		      BYTE_  b_Filter	      : Filter selection             |
+|		      unsigned char_  b_Filter	      : Filter selection             |
 |                                                                            |
 |				30 MHz                                       |
 |				------                                       |
@@ -2297,11 +2297,11 @@ INT i_APCI1710_ClearAllCounterValue(struct comedi_device * dev)
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_SetInputFilter(struct comedi_device * dev,
-	BYTE b_ModulNbr, BYTE b_PCIInputClock, BYTE b_Filter)
+int i_APCI1710_SetInputFilter(struct comedi_device *dev,
+	unsigned char b_ModulNbr, unsigned char b_PCIInputClock, unsigned char b_Filter)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_Status = 0;
+	int i_ReturnValue = 0;
+	unsigned int dw_Status = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -2365,7 +2365,7 @@ INT i_APCI1710_SetInputFilter(struct comedi_device * dev,
 								i_ReturnValue =
 									-6;
 							}
-						}	// if (b_PCIInputClock == APCI1710_40MHZ)
+						}	/*  if (b_PCIInputClock == APCI1710_40MHZ) */
 
 		       /***************************/
 						/* Test if error not occur */
@@ -2401,7 +2401,7 @@ INT i_APCI1710_SetInputFilter(struct comedi_device * dev,
 									|
 									APCI1710_ENABLE_40MHZ_FILTER;
 
-							}	// if (b_PCIInputClock == APCI1710_40MHZ)
+							}	/*  if (b_PCIInputClock == APCI1710_40MHZ) */
 							else {
 			     /**********************************/
 								/* Disable the 40MHz quarz (DQ31) */
@@ -2425,7 +2425,7 @@ INT i_APCI1710_SetInputFilter(struct comedi_device * dev,
 									&
 									APCI1710_DISABLE_40MHZ_FILTER;
 
-							}	// if (b_PCIInputClock == APCI1710_40MHZ)
+							}	/*  if (b_PCIInputClock == APCI1710_40MHZ) */
 
 			  /************************/
 							/* Set the filter value */
@@ -2486,8 +2486,8 @@ INT i_APCI1710_SetInputFilter(struct comedi_device * dev,
 								ui_Address +
 								20 +
 								(64 * b_ModulNbr));
-						}	// if (i_ReturnValue == 0)
-					}	// if (b_Filter < 16)
+						}	/*  if (i_ReturnValue == 0) */
+					}	/*  if (b_Filter < 16) */
 					else {
 		       /**************************************/
 						/* The selected filter value is wrong */
@@ -2495,8 +2495,8 @@ INT i_APCI1710_SetInputFilter(struct comedi_device * dev,
 
 						DPRINTK("The selected filter value is wrong\n");
 						i_ReturnValue = -5;
-					}	// if (b_Filter < 16)
-				}	// if ((b_PCIInputClock == APCI1710_30MHZ) || (b_PCIInputClock == APCI1710_33MHZ) || (b_PCIInputClock == APCI1710_40MHZ))
+					}	/*  if (b_Filter < 16) */
+				}	/*  if ((b_PCIInputClock == APCI1710_30MHZ) || (b_PCIInputClock == APCI1710_33MHZ) || (b_PCIInputClock == APCI1710_40MHZ)) */
 				else {
 		    /*****************************************/
 					/* The selected PCI input clock is wrong */
@@ -2504,7 +2504,7 @@ INT i_APCI1710_SetInputFilter(struct comedi_device * dev,
 
 					DPRINTK("The selected PCI input clock is wrong\n");
 					i_ReturnValue = 4;
-				}	// if ((b_PCIInputClock == APCI1710_30MHZ) || (b_PCIInputClock == APCI1710_33MHZ) || (b_PCIInputClock == APCI1710_40MHZ))
+				}	/*  if ((b_PCIInputClock == APCI1710_30MHZ) || (b_PCIInputClock == APCI1710_33MHZ) || (b_PCIInputClock == APCI1710_40MHZ)) */
 			} else {
 		 /**************************************/
 				/* The module is not a counter module */
@@ -2530,23 +2530,23 @@ INT i_APCI1710_SetInputFilter(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
-| Function Name     : _INT_ i_APCI1710_LatchCounter (BYTE_ b_BoardHandle,    |
-|                                                    BYTE_ b_ModulNbr,       |
-|                                                    BYTE_ b_LatchReg)       |
+| Function Name     : _INT_ i_APCI1710_LatchCounter (unsigned char_ b_BoardHandle,    |
+|                                                    unsigned char_ b_ModulNbr,       |
+|                                                    unsigned char_ b_LatchReg)       |
 +----------------------------------------------------------------------------+
 | Task              : Latch the courant value from selected module           |
 |                     (b_ModulNbr) in to the selected latch register         |
 |                     (b_LatchReg).                                          |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle : Handle of board APCI-1710        |
-|                     BYTE_ b_ModulNbr    : Module number to configure       |
+| Input Parameters  : unsigned char_ b_BoardHandle : Handle of board APCI-1710        |
+|                     unsigned char_ b_ModulNbr    : Module number to configure       |
 |                                           (0 to 3)                         |
-|                     BYTE_ b_LatchReg    : Selected latch register          |
+|                     unsigned char_ b_LatchReg    : Selected latch register          |
 |                               0 : for the first latch register             |
 |                               1 : for the second latch register            |
 +----------------------------------------------------------------------------+
@@ -2561,10 +2561,10 @@ INT i_APCI1710_SetInputFilter(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_LatchCounter(struct comedi_device * dev,
-	BYTE b_ModulNbr, BYTE b_LatchReg)
+int i_APCI1710_LatchCounter(struct comedi_device *dev,
+	unsigned char b_ModulNbr, unsigned char b_LatchReg)
 {
-	INT i_ReturnValue = 0;
+	int i_ReturnValue = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -2616,25 +2616,25 @@ INT i_APCI1710_LatchCounter(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_	i_APCI1710_SetIndexAndReferenceSource        |
-|					(BYTE_ b_BoardHandle,                |
-|					 BYTE_ b_ModulNbr,                   |
-|					 BYTE_ b_SourceSelection)            |
+|					(unsigned char_ b_BoardHandle,                |
+|					 unsigned char_ b_ModulNbr,                   |
+|					 unsigned char_ b_SourceSelection)            |
 +----------------------------------------------------------------------------+
 | Task              : Determine the hardware source for the index and the    |
 |		      reference logic. Per default the index logic is        |
 |		      connected to the difference input C and the reference  |
 |		      logic is connected to the 24V input E                  |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle     : Handle of board APCI-1710    |
-|                     BYTE_ b_ModulNbr        : Module number to configure   |
+| Input Parameters  : unsigned char_ b_BoardHandle     : Handle of board APCI-1710    |
+|                     unsigned char_ b_ModulNbr        : Module number to configure   |
 |                                               (0 to 3)                     |
-|		      BYTE_ b_SourceSelection : APCI1710_SOURCE_0 :          |
+|		      unsigned char_ b_SourceSelection : APCI1710_SOURCE_0 :          |
 |						The index logic is connected |
 |						to the difference input C and|
 |						the reference logic is       |
@@ -2658,10 +2658,10 @@ INT i_APCI1710_LatchCounter(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_SetIndexAndReferenceSource(struct comedi_device * dev,
-	BYTE b_ModulNbr, BYTE b_SourceSelection)
+int i_APCI1710_SetIndexAndReferenceSource(struct comedi_device *dev,
+	unsigned char b_ModulNbr, unsigned char b_SourceSelection)
 {
-	INT i_ReturnValue = 0;
+	int i_ReturnValue = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -2735,7 +2735,7 @@ INT i_APCI1710_SetIndexAndReferenceSource(struct comedi_device * dev,
 							b_ModeRegister4 &
 							APCI1710_DEFAULT_INDEX_RFERENCE;
 					}
-				}	// if (b_SourceSelection == APCI1710_SOURCE_0 ||b_SourceSelection == APCI1710_SOURCE_1)
+				}	/*  if (b_SourceSelection == APCI1710_SOURCE_0 ||b_SourceSelection == APCI1710_SOURCE_1) */
 				else {
 		    /*********************************/
 					/* The source selection is wrong */
@@ -2743,7 +2743,7 @@ INT i_APCI1710_SetIndexAndReferenceSource(struct comedi_device * dev,
 
 					DPRINTK("The source selection is wrong\n");
 					i_ReturnValue = -4;
-				}	// if (b_SourceSelection == APCI1710_SOURCE_0 ||b_SourceSelection == APCI1710_SOURCE_1)
+				}	/*  if (b_SourceSelection == APCI1710_SOURCE_0 ||b_SourceSelection == APCI1710_SOURCE_1) */
 			} else {
 		 /**************************************/
 				/* The module is not a counter module */
@@ -2769,20 +2769,20 @@ INT i_APCI1710_SetIndexAndReferenceSource(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_	i_APCI1710_SetDigitalChlOn                   |
-|				   (BYTE_  b_BoardHandle,                    |
-|				    BYTE_  b_ModulNbr)                       |
+|				   (unsigned char_  b_BoardHandle,                    |
+|				    unsigned char_  b_ModulNbr)                       |
 +----------------------------------------------------------------------------+
 | Task              : Sets the digital output H Setting an output means      |
 |		      setting an ouput high.                                 |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_  b_BoardHandle    : Handle of board APCI-1710    |
-|		      BYTE_  b_ModulNbr	      :	Number of the module to be   |
+| Input Parameters  : unsigned char_  b_BoardHandle    : Handle of board APCI-1710    |
+|		      unsigned char_  b_ModulNbr	      :	Number of the module to be   |
 |						configured (0 to 3)          |
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
@@ -2795,9 +2795,9 @@ INT i_APCI1710_SetIndexAndReferenceSource(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_SetDigitalChlOn(struct comedi_device * dev, BYTE b_ModulNbr)
+int i_APCI1710_SetDigitalChlOn(struct comedi_device *dev, unsigned char b_ModulNbr)
 {
-	INT i_ReturnValue = 0;
+	int i_ReturnValue = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -2849,20 +2849,20 @@ INT i_APCI1710_SetDigitalChlOn(struct comedi_device * dev, BYTE b_ModulNbr)
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_	i_APCI1710_SetDigitalChlOff                  |
-|				   (BYTE_  b_BoardHandle,                    |
-|				    BYTE_  b_ModulNbr)                       |
+|				   (unsigned char_  b_BoardHandle,                    |
+|				    unsigned char_  b_ModulNbr)                       |
 +----------------------------------------------------------------------------+
 | Task              : Resets the digital output H. Resetting an output means |
 |		      setting an ouput low.                                  |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_  b_BoardHandle    : Handle of board APCI-1710    |
-|		      BYTE_  b_ModulNbr	      :	Number of the module to be   |
+| Input Parameters  : unsigned char_  b_BoardHandle    : Handle of board APCI-1710    |
+|		      unsigned char_  b_ModulNbr	      :	Number of the module to be   |
 |						configured (0 to 3)          |
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
@@ -2875,9 +2875,9 @@ INT i_APCI1710_SetDigitalChlOn(struct comedi_device * dev, BYTE b_ModulNbr)
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_SetDigitalChlOff(struct comedi_device * dev, BYTE b_ModulNbr)
+int i_APCI1710_SetDigitalChlOff(struct comedi_device *dev, unsigned char b_ModulNbr)
 {
-	INT i_ReturnValue = 0;
+	int i_ReturnValue = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -2929,12 +2929,12 @@ INT i_APCI1710_SetDigitalChlOff(struct comedi_device * dev, BYTE b_ModulNbr)
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*########################################################################### */
 
-							// INSN WRITE
+							/*  INSN WRITE */
 /*########################################################################### */
 
 /*
@@ -2951,65 +2951,65 @@ struct comedi_insn *insn,unsigned int *data)                   |
 | Return Value      :
 +----------------------------------------------------------------------------+
 */
-INT i_APCI1710_InsnWriteINCCPT(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnWriteINCCPT(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_WriteType;
-	INT i_ReturnValue = 0;
+	unsigned int ui_WriteType;
+	int i_ReturnValue = 0;
 
 	ui_WriteType = CR_CHAN(insn->chanspec);
-	devpriv->tsk_Current = current;	// Save the current process task structure
+	devpriv->tsk_Current = current;	/*  Save the current process task structure */
 
 	switch (ui_WriteType) {
 	case APCI1710_INCCPT_ENABLELATCHINTERRUPT:
 		i_ReturnValue = i_APCI1710_EnableLatchInterrupt(dev,
-			(BYTE) CR_AREF(insn->chanspec));
+			(unsigned char) CR_AREF(insn->chanspec));
 		break;
 
 	case APCI1710_INCCPT_DISABLELATCHINTERRUPT:
 		i_ReturnValue = i_APCI1710_DisableLatchInterrupt(dev,
-			(BYTE) CR_AREF(insn->chanspec));
+			(unsigned char) CR_AREF(insn->chanspec));
 		break;
 
 	case APCI1710_INCCPT_WRITE16BITCOUNTERVALUE:
 		i_ReturnValue = i_APCI1710_Write16BitCounterValue(dev,
-			(BYTE) CR_AREF(insn->chanspec),
-			(BYTE) data[0], (UINT) data[1]);
+			(unsigned char) CR_AREF(insn->chanspec),
+			(unsigned char) data[0], (unsigned int) data[1]);
 		break;
 
 	case APCI1710_INCCPT_WRITE32BITCOUNTERVALUE:
 		i_ReturnValue = i_APCI1710_Write32BitCounterValue(dev,
-			(BYTE) CR_AREF(insn->chanspec), (ULONG) data[0]);
+			(unsigned char) CR_AREF(insn->chanspec), (unsigned int) data[0]);
 
 		break;
 
 	case APCI1710_INCCPT_ENABLEINDEX:
-		i_APCI1710_EnableIndex(dev, (BYTE) CR_AREF(insn->chanspec));
+		i_APCI1710_EnableIndex(dev, (unsigned char) CR_AREF(insn->chanspec));
 		break;
 
 	case APCI1710_INCCPT_DISABLEINDEX:
 		i_ReturnValue = i_APCI1710_DisableIndex(dev,
-			(BYTE) CR_AREF(insn->chanspec));
+			(unsigned char) CR_AREF(insn->chanspec));
 		break;
 
 	case APCI1710_INCCPT_ENABLECOMPARELOGIC:
 		i_ReturnValue = i_APCI1710_EnableCompareLogic(dev,
-			(BYTE) CR_AREF(insn->chanspec));
+			(unsigned char) CR_AREF(insn->chanspec));
 		break;
 
 	case APCI1710_INCCPT_DISABLECOMPARELOGIC:
 		i_ReturnValue = i_APCI1710_DisableCompareLogic(dev,
-			(BYTE) CR_AREF(insn->chanspec));
+			(unsigned char) CR_AREF(insn->chanspec));
 		break;
 
 	case APCI1710_INCCPT_ENABLEFREQUENCYMEASUREMENT:
 		i_ReturnValue = i_APCI1710_EnableFrequencyMeasurement(dev,
-			(BYTE) CR_AREF(insn->chanspec), (BYTE) data[0]);
+			(unsigned char) CR_AREF(insn->chanspec), (unsigned char) data[0]);
 		break;
 
 	case APCI1710_INCCPT_DISABLEFREQUENCYMEASUREMENT:
 		i_ReturnValue = i_APCI1710_DisableFrequencyMeasurement(dev,
-			(BYTE) CR_AREF(insn->chanspec));
+			(unsigned char) CR_AREF(insn->chanspec));
 		break;
 
 	default:
@@ -3018,21 +3018,21 @@ INT i_APCI1710_InsnWriteINCCPT(struct comedi_device * dev, struct comedi_subdevi
 
 	if (i_ReturnValue >= 0)
 		i_ReturnValue = insn->n;
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_EnableLatchInterrupt                  |
-|                               (BYTE_ b_BoardHandle,                        |
-|                                BYTE_ b_ModulNbr)                           |
+|                               (unsigned char_ b_BoardHandle,                        |
+|                                unsigned char_ b_ModulNbr)                           |
 +----------------------------------------------------------------------------+
 | Task              : Enable the latch interrupt from selected module        |
 |                     (b_ModulNbr). Each software or hardware latch occur a  |
 |                     interrupt.                                             |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle : Handle of board APCI-1710        |
-|                     BYTE_ b_ModulNbr    : Module number to configure       |
+| Input Parameters  : unsigned char_ b_BoardHandle : Handle of board APCI-1710        |
+|                     unsigned char_ b_ModulNbr    : Module number to configure       |
 |                                           (0 to 3)                         |
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
@@ -3047,9 +3047,9 @@ INT i_APCI1710_InsnWriteINCCPT(struct comedi_device * dev, struct comedi_subdevi
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_EnableLatchInterrupt(struct comedi_device * dev, BYTE b_ModulNbr)
+int i_APCI1710_EnableLatchInterrupt(struct comedi_device *dev, unsigned char b_ModulNbr)
 {
-	INT i_ReturnValue = 0;
+	int i_ReturnValue = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -3105,20 +3105,20 @@ INT i_APCI1710_EnableLatchInterrupt(struct comedi_device * dev, BYTE b_ModulNbr)
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_DisableLatchInterrupt                 |
-|                               (BYTE_ b_BoardHandle,                        |
-|                                BYTE_ b_ModulNbr)                           |
+|                               (unsigned char_ b_BoardHandle,                        |
+|                                unsigned char_ b_ModulNbr)                           |
 +----------------------------------------------------------------------------+
 | Task              : Disable the latch interrupt from selected module       |
 |                     (b_ModulNbr).                                          |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle : Handle of board APCI-1710        |
-|                     BYTE_ b_ModulNbr    : Module number to configure       |
+| Input Parameters  : unsigned char_ b_BoardHandle : Handle of board APCI-1710        |
+|                     unsigned char_ b_ModulNbr    : Module number to configure       |
 |                                           (0 to 3)                         |
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
@@ -3133,9 +3133,9 @@ INT i_APCI1710_EnableLatchInterrupt(struct comedi_device * dev, BYTE b_ModulNbr)
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_DisableLatchInterrupt(struct comedi_device * dev, BYTE b_ModulNbr)
+int i_APCI1710_DisableLatchInterrupt(struct comedi_device *dev, unsigned char b_ModulNbr)
 {
-	INT i_ReturnValue = 0;
+	int i_ReturnValue = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -3198,27 +3198,27 @@ INT i_APCI1710_DisableLatchInterrupt(struct comedi_device * dev, BYTE b_ModulNbr
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_Write16BitCounterValue                |
-|                                               (BYTE_  b_BoardHandle        |
-|                                                BYTE_  b_ModulNbr,          |
-|                                                BYTE_  b_SelectedCounter,   |
-|                                                UINT_ ui_WriteValue)        |
+|                                               (unsigned char_  b_BoardHandle        |
+|                                                unsigned char_  b_ModulNbr,          |
+|                                                unsigned char_  b_SelectedCounter,   |
+|                                                unsigned int_ ui_WriteValue)        |
 +----------------------------------------------------------------------------+
 | Task              : Write a 16-Bit value (ui_WriteValue) in to the selected|
 |                     16-Bit counter (b_SelectedCounter) from selected module|
 |                     (b_ModulNbr).                                          |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle     : Handle of board APCI-1710    |
-|                     BYTE_ b_ModulNbr        : Module number to configure   |
+| Input Parameters  : unsigned char_ b_BoardHandle     : Handle of board APCI-1710    |
+|                     unsigned char_ b_ModulNbr        : Module number to configure   |
 |                                              (0 to 3)                      |
-|                     BYTE_ b_SelectedCounter : Selected 16-Bit counter      |
+|                     unsigned char_ b_SelectedCounter : Selected 16-Bit counter      |
 |                                               (0 or 1)                     |
-|                     UINT_ ui_WriteValue     : 16-Bit write value           |
+|                     unsigned int_ ui_WriteValue     : 16-Bit write value           |
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
 +----------------------------------------------------------------------------+
@@ -3231,10 +3231,10 @@ INT i_APCI1710_DisableLatchInterrupt(struct comedi_device * dev, BYTE b_ModulNbr
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_Write16BitCounterValue(struct comedi_device * dev,
-	BYTE b_ModulNbr, BYTE b_SelectedCounter, UINT ui_WriteValue)
+int i_APCI1710_Write16BitCounterValue(struct comedi_device *dev,
+	unsigned char b_ModulNbr, unsigned char b_SelectedCounter, unsigned int ui_WriteValue)
 {
-	INT i_ReturnValue = 0;
+	int i_ReturnValue = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -3257,7 +3257,7 @@ INT i_APCI1710_Write16BitCounterValue(struct comedi_device * dev,
 				/* Write the value */
 		 /*******************/
 
-				outl((ULONG) ((ULONG) (ui_WriteValue) << (16 *
+				outl((unsigned int) ((unsigned int) (ui_WriteValue) << (16 *
 							b_SelectedCounter)),
 					devpriv->s_BoardInfos.ui_Address + 8 +
 					(b_SelectedCounter * 4) +
@@ -3288,21 +3288,21 @@ INT i_APCI1710_Write16BitCounterValue(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_Write32BitCounterValue                |
-|                                               (BYTE_   b_BoardHandle       |
-|                                                BYTE_   b_ModulNbr,         |
+|                                               (unsigned char_   b_BoardHandle       |
+|                                                unsigned char_   b_ModulNbr,         |
 |                                                ULONG_ ul_WriteValue)       |
 +----------------------------------------------------------------------------+
 | Task              : Write a 32-Bit value (ui_WriteValue) in to the selected|
 |                     module (b_ModulNbr).                                   |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle     : Handle of board APCI-1710    |
-|                     BYTE_ b_ModulNbr        : Module number to configure   |
+| Input Parameters  : unsigned char_ b_BoardHandle     : Handle of board APCI-1710    |
+|                     unsigned char_ b_ModulNbr        : Module number to configure   |
 |                                              (0 to 3)                      |
 |                     ULONG_ ul_WriteValue    : 32-Bit write value           |
 +----------------------------------------------------------------------------+
@@ -3316,10 +3316,10 @@ INT i_APCI1710_Write16BitCounterValue(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_Write32BitCounterValue(struct comedi_device * dev,
-	BYTE b_ModulNbr, ULONG ul_WriteValue)
+int i_APCI1710_Write32BitCounterValue(struct comedi_device *dev,
+	unsigned char b_ModulNbr, unsigned int ul_WriteValue)
 {
-	INT i_ReturnValue = 0;
+	int i_ReturnValue = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -3357,18 +3357,18 @@ INT i_APCI1710_Write32BitCounterValue(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
-| Function Name     : _INT_ i_APCI1710_EnableIndex (BYTE_  b_BoardHandle,    |
-|                                                   BYTE_  b_ModulNbr)       |
+| Function Name     : _INT_ i_APCI1710_EnableIndex (unsigned char_  b_BoardHandle,    |
+|                                                   unsigned char_  b_ModulNbr)       |
 +----------------------------------------------------------------------------+
 | Task              : Enable the INDEX actions                               |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle     : Handle of board APCI-1710    |
-|                     BYTE_ b_ModulNbr        : Module number to configure   |
+| Input Parameters  : unsigned char_ b_BoardHandle     : Handle of board APCI-1710    |
+|                     unsigned char_ b_ModulNbr        : Module number to configure   |
 |                                               (0 to 3)                     |
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
@@ -3383,10 +3383,10 @@ INT i_APCI1710_Write32BitCounterValue(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_EnableIndex(struct comedi_device * dev, BYTE b_ModulNbr)
+int i_APCI1710_EnableIndex(struct comedi_device *dev, unsigned char b_ModulNbr)
 {
-	INT i_ReturnValue = 0;
-	ULONG ul_InterruptLatchReg;
+	int i_ReturnValue = 0;
+	unsigned int ul_InterruptLatchReg;
 
 	/**************************/
 	/* Test the module number */
@@ -3455,18 +3455,18 @@ INT i_APCI1710_EnableIndex(struct comedi_device * dev, BYTE b_ModulNbr)
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
-| Function Name     : _INT_ i_APCI1710_DisableIndex (BYTE_  b_BoardHandle,   |
-|                                                    BYTE_  b_ModulNbr)      |
+| Function Name     : _INT_ i_APCI1710_DisableIndex (unsigned char_  b_BoardHandle,   |
+|                                                    unsigned char_  b_ModulNbr)      |
 +----------------------------------------------------------------------------+
 | Task              : Disable the INDEX actions                              |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle     : Handle of board APCI-1710    |
-|                     BYTE_ b_ModulNbr        : Module number to configure   |
+| Input Parameters  : unsigned char_ b_BoardHandle     : Handle of board APCI-1710    |
+|                     unsigned char_ b_ModulNbr        : Module number to configure   |
 |                                               (0 to 3)                     |
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
@@ -3481,9 +3481,9 @@ INT i_APCI1710_EnableIndex(struct comedi_device * dev, BYTE b_ModulNbr)
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_DisableIndex(struct comedi_device * dev, BYTE b_ModulNbr)
+int i_APCI1710_DisableIndex(struct comedi_device *dev, unsigned char b_ModulNbr)
 {
-	INT i_ReturnValue = 0;
+	int i_ReturnValue = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -3549,21 +3549,21 @@ INT i_APCI1710_DisableIndex(struct comedi_device * dev, BYTE b_ModulNbr)
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_EnableCompareLogic                    |
-|                               (BYTE_   b_BoardHandle,                      |
-|                                BYTE_   b_ModulNbr)                         |
+|                               (unsigned char_   b_BoardHandle,                      |
+|                                unsigned char_   b_ModulNbr)                         |
 +----------------------------------------------------------------------------+
 | Task              : Enable the 32-Bit compare logic. At that moment that   |
 |                     the incremental counter arrive to the compare value a  |
 |                     interrupt is generated.                                |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_  b_BoardHandle    : Handle of board APCI-1710    |
-|                     BYTE_  b_ModulNbr       : Module number to configure   |
+| Input Parameters  : unsigned char_  b_BoardHandle    : Handle of board APCI-1710    |
+|                     unsigned char_  b_ModulNbr       : Module number to configure   |
 |                                               (0 to 3)                     |
 +----------------------------------------------------------------------------+
 | Output Parameters : -
@@ -3580,9 +3580,9 @@ INT i_APCI1710_DisableIndex(struct comedi_device * dev, BYTE b_ModulNbr)
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_EnableCompareLogic(struct comedi_device * dev, BYTE b_ModulNbr)
+int i_APCI1710_EnableCompareLogic(struct comedi_device *dev, unsigned char b_ModulNbr)
 {
-	INT i_ReturnValue = 0;
+	int i_ReturnValue = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -3653,19 +3653,19 @@ INT i_APCI1710_EnableCompareLogic(struct comedi_device * dev, BYTE b_ModulNbr)
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_DisableCompareLogic                   |
-|                               (BYTE_   b_BoardHandle,                      |
-|                                BYTE_   b_ModulNbr)                         |
+|                               (unsigned char_   b_BoardHandle,                      |
+|                                unsigned char_   b_ModulNbr)                         |
 +----------------------------------------------------------------------------+
 | Task              : Disable the 32-Bit compare logic.
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_  b_BoardHandle    : Handle of board APCI-1710    |
-|                     BYTE_  b_ModulNbr       : Module number to configure   |
+| Input Parameters  : unsigned char_  b_BoardHandle    : Handle of board APCI-1710    |
+|                     unsigned char_  b_ModulNbr       : Module number to configure   |
 |                                               (0 to 3)                     |
 +----------------------------------------------------------------------------+
 | Output Parameters : -
@@ -3680,9 +3680,9 @@ INT i_APCI1710_EnableCompareLogic(struct comedi_device * dev, BYTE b_ModulNbr)
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_DisableCompareLogic(struct comedi_device * dev, BYTE b_ModulNbr)
+int i_APCI1710_DisableCompareLogic(struct comedi_device *dev, unsigned char b_ModulNbr)
 {
-	INT i_ReturnValue = 0;
+	int i_ReturnValue = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -3753,22 +3753,22 @@ INT i_APCI1710_DisableCompareLogic(struct comedi_device * dev, BYTE b_ModulNbr)
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 	/*
 	   +----------------------------------------------------------------------------+
 	   | Function Name     : _INT_ i_APCI1710_EnableFrequencyMeasurement            |
-	   |                            (BYTE_   b_BoardHandle,                      |
-	   |                             BYTE_   b_ModulNbr,                         |
-	   |                             BYTE_   b_InterruptEnable)                  |
+	   |                            (unsigned char_   b_BoardHandle,                      |
+	   |                             unsigned char_   b_ModulNbr,                         |
+	   |                             unsigned char_   b_InterruptEnable)                  |
 	   +----------------------------------------------------------------------------+
 	   | Task              : Enables the frequency measurement function             |
 	   +----------------------------------------------------------------------------+
-	   | Input Parameters  : BYTE_  b_BoardHandle    : Handle of board APCI-1710    |
-	   |                  BYTE_  b_ModulNbr       : Number of the module to be   |
+	   | Input Parameters  : unsigned char_  b_BoardHandle    : Handle of board APCI-1710    |
+	   |                  unsigned char_  b_ModulNbr       : Number of the module to be   |
 	   |                                            configured (0 to 3)          |
-	   |                  BYTE_  b_InterruptEnable: Enable or disable the        |
+	   |                  unsigned char_  b_InterruptEnable: Enable or disable the        |
 	   |                                            interrupt.                   |
 	   |                                            APCI1710_ENABLE:             |
 	   |                                            Enable the interrupt         |
@@ -3789,10 +3789,10 @@ INT i_APCI1710_DisableCompareLogic(struct comedi_device * dev, BYTE b_ModulNbr)
 	   +----------------------------------------------------------------------------+
 	 */
 
-INT i_APCI1710_EnableFrequencyMeasurement(struct comedi_device * dev,
-	BYTE b_ModulNbr, BYTE b_InterruptEnable)
+int i_APCI1710_EnableFrequencyMeasurement(struct comedi_device *dev,
+	unsigned char b_ModulNbr, unsigned char b_InterruptEnable)
 {
-	INT i_ReturnValue = 0;
+	int i_ReturnValue = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -3909,19 +3909,19 @@ INT i_APCI1710_EnableFrequencyMeasurement(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 	/*
 	   +----------------------------------------------------------------------------+
 	   | Function Name     : _INT_ i_APCI1710_DisableFrequencyMeasurement           |
-	   |                            (BYTE_   b_BoardHandle,                      |
-	   |                             BYTE_   b_ModulNbr)                         |
+	   |                            (unsigned char_   b_BoardHandle,                      |
+	   |                             unsigned char_   b_ModulNbr)                         |
 	   +----------------------------------------------------------------------------+
 	   | Task              : Disables the frequency measurement function             |
 	   +----------------------------------------------------------------------------+
-	   | Input Parameters  : BYTE_  b_BoardHandle    : Handle of board APCI-1710    |
-	   |                  BYTE_  b_ModulNbr       : Number of the module to be   |
+	   | Input Parameters  : unsigned char_  b_BoardHandle    : Handle of board APCI-1710    |
+	   |                  unsigned char_  b_ModulNbr       : Number of the module to be   |
 	   |                                            configured (0 to 3)          |
 	   +----------------------------------------------------------------------------+
 	   | Output Parameters : -                                                      |
@@ -3936,9 +3936,9 @@ INT i_APCI1710_EnableFrequencyMeasurement(struct comedi_device * dev,
 	   +----------------------------------------------------------------------------+
 	 */
 
-INT i_APCI1710_DisableFrequencyMeasurement(struct comedi_device * dev, BYTE b_ModulNbr)
+int i_APCI1710_DisableFrequencyMeasurement(struct comedi_device *dev, unsigned char b_ModulNbr)
 {
-	INT i_ReturnValue = 0;
+	int i_ReturnValue = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -3976,9 +3976,9 @@ INT i_APCI1710_DisableFrequencyMeasurement(struct comedi_device * dev, BYTE b_Mo
 					s_ByteModeRegister.
 					b_ModeRegister3 &
 					APCI1710_DISABLE_FREQUENCY
-					// Begin CG 29/06/01 CG 1100/0231 -> 0701/0232 Frequence measure IRQ must be cleared
+					/*  Begin CG 29/06/01 CG 1100/0231 -> 0701/0232 Frequence measure IRQ must be cleared */
 					& APCI1710_DISABLE_FREQUENCY_INT;
-				// End CG 29/06/01 CG 1100/0231 -> 0701/0232 Frequence measure IRQ must be cleared
+				/*  End CG 29/06/01 CG 1100/0231 -> 0701/0232 Frequence measure IRQ must be cleared */
 
 		 /***************************/
 				/* Write the configuration */
@@ -4026,12 +4026,12 @@ INT i_APCI1710_DisableFrequencyMeasurement(struct comedi_device * dev, BYTE b_Mo
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*########################################################################### */
 
-							// INSN READ
+							/*  INSN READ */
 
 /*########################################################################### */
 
@@ -4049,82 +4049,82 @@ struct comedi_insn *insn,unsigned int *data)                   |
 | Return Value      :
 +----------------------------------------------------------------------------+
 */
-INT i_APCI1710_InsnReadINCCPT(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnReadINCCPT(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_ReadType;
-	INT i_ReturnValue = 0;
+	unsigned int ui_ReadType;
+	int i_ReturnValue = 0;
 
 	ui_ReadType = CR_CHAN(insn->chanspec);
 
-	devpriv->tsk_Current = current;	// Save the current process task structure
+	devpriv->tsk_Current = current;	/*  Save the current process task structure */
 	switch (ui_ReadType) {
 	case APCI1710_INCCPT_READLATCHREGISTERSTATUS:
 		i_ReturnValue = i_APCI1710_ReadLatchRegisterStatus(dev,
-			(BYTE) CR_AREF(insn->chanspec),
-			(BYTE) CR_RANGE(insn->chanspec), (PBYTE) & data[0]);
+			(unsigned char) CR_AREF(insn->chanspec),
+			(unsigned char) CR_RANGE(insn->chanspec), (unsigned char *) &data[0]);
 		break;
 
 	case APCI1710_INCCPT_READLATCHREGISTERVALUE:
 		i_ReturnValue = i_APCI1710_ReadLatchRegisterValue(dev,
-			(BYTE) CR_AREF(insn->chanspec),
-			(BYTE) CR_RANGE(insn->chanspec), (PULONG) & data[0]);
+			(unsigned char) CR_AREF(insn->chanspec),
+			(unsigned char) CR_RANGE(insn->chanspec), (unsigned int *) &data[0]);
 		printk("Latch Register Value %d\n", data[0]);
 		break;
 
 	case APCI1710_INCCPT_READ16BITCOUNTERVALUE:
 		i_ReturnValue = i_APCI1710_Read16BitCounterValue(dev,
-			(BYTE) CR_AREF(insn->chanspec),
-			(BYTE) CR_RANGE(insn->chanspec), (PUINT) & data[0]);
+			(unsigned char) CR_AREF(insn->chanspec),
+			(unsigned char) CR_RANGE(insn->chanspec), (unsigned int *) &data[0]);
 		break;
 
 	case APCI1710_INCCPT_READ32BITCOUNTERVALUE:
 		i_ReturnValue = i_APCI1710_Read32BitCounterValue(dev,
-			(BYTE) CR_AREF(insn->chanspec), (PULONG) & data[0]);
+			(unsigned char) CR_AREF(insn->chanspec), (unsigned int *) &data[0]);
 		break;
 
 	case APCI1710_INCCPT_GETINDEXSTATUS:
 		i_ReturnValue = i_APCI1710_GetIndexStatus(dev,
-			(BYTE) CR_AREF(insn->chanspec), (PBYTE) & data[0]);
+			(unsigned char) CR_AREF(insn->chanspec), (unsigned char *) &data[0]);
 		break;
 
 	case APCI1710_INCCPT_GETREFERENCESTATUS:
 		i_ReturnValue = i_APCI1710_GetReferenceStatus(dev,
-			(BYTE) CR_AREF(insn->chanspec), (PBYTE) & data[0]);
+			(unsigned char) CR_AREF(insn->chanspec), (unsigned char *) &data[0]);
 		break;
 
 	case APCI1710_INCCPT_GETUASSTATUS:
 		i_ReturnValue = i_APCI1710_GetUASStatus(dev,
-			(BYTE) CR_AREF(insn->chanspec), (PBYTE) & data[0]);
+			(unsigned char) CR_AREF(insn->chanspec), (unsigned char *) &data[0]);
 		break;
 
 	case APCI1710_INCCPT_GETCBSTATUS:
 		i_ReturnValue = i_APCI1710_GetCBStatus(dev,
-			(BYTE) CR_AREF(insn->chanspec), (PBYTE) & data[0]);
+			(unsigned char) CR_AREF(insn->chanspec), (unsigned char *) &data[0]);
 		break;
 
 	case APCI1710_INCCPT_GET16BITCBSTATUS:
 		i_ReturnValue = i_APCI1710_Get16BitCBStatus(dev,
-			(BYTE) CR_AREF(insn->chanspec),
-			(PBYTE) & data[0], (PBYTE) & data[1]);
+			(unsigned char) CR_AREF(insn->chanspec),
+			(unsigned char *) &data[0], (unsigned char *) &data[1]);
 		break;
 
 	case APCI1710_INCCPT_GETUDSTATUS:
 		i_ReturnValue = i_APCI1710_GetUDStatus(dev,
-			(BYTE) CR_AREF(insn->chanspec), (PBYTE) & data[0]);
+			(unsigned char) CR_AREF(insn->chanspec), (unsigned char *) &data[0]);
 
 		break;
 
 	case APCI1710_INCCPT_GETINTERRUPTUDLATCHEDSTATUS:
 		i_ReturnValue = i_APCI1710_GetInterruptUDLatchedStatus(dev,
-			(BYTE) CR_AREF(insn->chanspec), (PBYTE) & data[0]);
+			(unsigned char) CR_AREF(insn->chanspec), (unsigned char *) &data[0]);
 		break;
 
 	case APCI1710_INCCPT_READFREQUENCYMEASUREMENT:
 		i_ReturnValue = i_APCI1710_ReadFrequencyMeasurement(dev,
-			(BYTE) CR_AREF(insn->chanspec),
-			(PBYTE) & data[0],
-			(PBYTE) & data[1], (PULONG) & data[2]);
+			(unsigned char) CR_AREF(insn->chanspec),
+			(unsigned char *) &data[0],
+			(unsigned char *) &data[1], (unsigned int *) &data[2]);
 		break;
 
 	case APCI1710_INCCPT_READINTERRUPT:
@@ -4155,29 +4155,29 @@ INT i_APCI1710_InsnReadINCCPT(struct comedi_device * dev, struct comedi_subdevic
 
 	if (i_ReturnValue >= 0)
 		i_ReturnValue = insn->n;
-	return (i_ReturnValue);
+	return i_ReturnValue;
 
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_ReadLatchRegisterStatus               |
-|                                                   (BYTE_   b_BoardHandle,  |
-|                                                    BYTE_   b_ModulNbr,     |
-|                                                    BYTE_   b_LatchReg,     |
-|                                                    PBYTE_ pb_LatchStatus)  |
+|                                                   (unsigned char_   b_BoardHandle,  |
+|                                                    unsigned char_   b_ModulNbr,     |
+|                                                    unsigned char_   b_LatchReg,     |
+|                                                    unsigned char *_ pb_LatchStatus)  |
 +----------------------------------------------------------------------------+
 | Task              : Read the latch register status from selected module    |
 |                     (b_ModulNbr) and selected latch register (b_LatchReg). |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle : Handle of board APCI-1710        |
-|                     BYTE_ b_ModulNbr    : Module number to configure       |
+| Input Parameters  : unsigned char_ b_BoardHandle : Handle of board APCI-1710        |
+|                     unsigned char_ b_ModulNbr    : Module number to configure       |
 |                                           (0 to 3)                         |
-|                     BYTE_ b_LatchReg    : Selected latch register          |
+|                     unsigned char_ b_LatchReg    : Selected latch register          |
 |                               0 : for the first latch register             |
 |                               1 : for the second latch register            |
 +----------------------------------------------------------------------------+
-| Output Parameters : PBYTE_ pb_LatchStatus :   Latch register status.       |
+| Output Parameters : unsigned char *_ pb_LatchStatus :   Latch register status.       |
 |                                               0 : No latch occur           |
 |                                               1 : A software latch occur   |
 |                                               2 : A hardware latch occur   |
@@ -4193,11 +4193,11 @@ INT i_APCI1710_InsnReadINCCPT(struct comedi_device * dev, struct comedi_subdevic
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_ReadLatchRegisterStatus(struct comedi_device * dev,
-	BYTE b_ModulNbr, BYTE b_LatchReg, PBYTE pb_LatchStatus)
+int i_APCI1710_ReadLatchRegisterStatus(struct comedi_device *dev,
+	unsigned char b_ModulNbr, unsigned char b_LatchReg, unsigned char *pb_LatchStatus)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_LatchReg;
+	int i_ReturnValue = 0;
+	unsigned int dw_LatchReg;
 
 	/**************************/
 	/* Test the module number */
@@ -4220,7 +4220,7 @@ INT i_APCI1710_ReadLatchRegisterStatus(struct comedi_device * dev,
 					ui_Address + (64 * b_ModulNbr));
 
 				*pb_LatchStatus =
-					(BYTE) ((dw_LatchReg >> (b_LatchReg *
+					(unsigned char) ((dw_LatchReg >> (b_LatchReg *
 							4)) & 0x3);
 			} else {
 		 /**************************************************/
@@ -4248,24 +4248,24 @@ INT i_APCI1710_ReadLatchRegisterStatus(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_ReadLatchRegisterValue                |
-|                                                   (BYTE_     b_BoardHandle,|
-|                                                    BYTE_     b_ModulNbr,   |
-|                                                    BYTE_     b_LatchReg,   |
+|                                                   (unsigned char_     b_BoardHandle,|
+|                                                    unsigned char_     b_ModulNbr,   |
+|                                                    unsigned char_     b_LatchReg,   |
 |                                                    PULONG_ pul_LatchValue) |
 +----------------------------------------------------------------------------+
 | Task              : Read the latch register value from selected module     |
 |                     (b_ModulNbr) and selected latch register (b_LatchReg). |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle : Handle of board APCI-1710        |
-|                     BYTE_ b_ModulNbr    : Module number to configure       |
+| Input Parameters  : unsigned char_ b_BoardHandle : Handle of board APCI-1710        |
+|                     unsigned char_ b_ModulNbr    : Module number to configure       |
 |                                           (0 to 3)                         |
-|                     BYTE_ b_LatchReg    : Selected latch register          |
+|                     unsigned char_ b_LatchReg    : Selected latch register          |
 |                               0 : for the first latch register             |
 |                               1 : for the second latch register            |
 +----------------------------------------------------------------------------+
@@ -4280,10 +4280,10 @@ INT i_APCI1710_ReadLatchRegisterStatus(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_ReadLatchRegisterValue(struct comedi_device * dev,
-	BYTE b_ModulNbr, BYTE b_LatchReg, PULONG pul_LatchValue)
+int i_APCI1710_ReadLatchRegisterValue(struct comedi_device *dev,
+	unsigned char b_ModulNbr, unsigned char b_LatchReg, unsigned int *pul_LatchValue)
 {
-	INT i_ReturnValue = 0;
+	int i_ReturnValue = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -4332,28 +4332,28 @@ INT i_APCI1710_ReadLatchRegisterValue(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_Read16BitCounterValue                 |
-|                                       (BYTE_     b_BoardHandle,            |
-|                                        BYTE_     b_ModulNbr,               |
-|                                        BYTE_     b_SelectedCounter,        |
-|                                        PUINT_   pui_CounterValue)          |
+|                                       (unsigned char_     b_BoardHandle,            |
+|                                        unsigned char_     b_ModulNbr,               |
+|                                        unsigned char_     b_SelectedCounter,        |
+|                                        unsigned int *_   pui_CounterValue)          |
 +----------------------------------------------------------------------------+
 | Task              : Latch the selected 16-Bit counter (b_SelectedCounter)  |
 |                     from selected module (b_ModulNbr) in to the first      |
 |                     latch register and return the latched value.           |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle     : Handle of board APCI-1710    |
-|                     BYTE_ b_ModulNbr        : Module number to configure   |
+| Input Parameters  : unsigned char_ b_BoardHandle     : Handle of board APCI-1710    |
+|                     unsigned char_ b_ModulNbr        : Module number to configure   |
 |                                              (0 to 3)                      |
-|                     BYTE_ b_SelectedCounter : Selected 16-Bit counter      |
+|                     unsigned char_ b_SelectedCounter : Selected 16-Bit counter      |
 |                                               (0 or 1)                     |
 +----------------------------------------------------------------------------+
-| Output Parameters : PUINT_ pui_CounterValue : 16-Bit counter value         |
+| Output Parameters : unsigned int *_ pui_CounterValue : 16-Bit counter value         |
 +----------------------------------------------------------------------------+
 | Return Value      :  0: No error                                           |
 |                     -1: The handle parameter of the board is wrong         |
@@ -4364,11 +4364,11 @@ INT i_APCI1710_ReadLatchRegisterValue(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_Read16BitCounterValue(struct comedi_device * dev,
-	BYTE b_ModulNbr, BYTE b_SelectedCounter, PUINT pui_CounterValue)
+int i_APCI1710_Read16BitCounterValue(struct comedi_device *dev,
+	unsigned char b_ModulNbr, unsigned char b_SelectedCounter, unsigned int *pui_CounterValue)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_LathchValue = 0;
+	int i_ReturnValue = 0;
+	unsigned int dw_LathchValue = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -4402,7 +4402,7 @@ INT i_APCI1710_Read16BitCounterValue(struct comedi_device * dev,
 					ui_Address + 4 + (64 * b_ModulNbr));
 
 				*pui_CounterValue =
-					(UINT) ((dw_LathchValue >> (16 *
+					(unsigned int) ((dw_LathchValue >> (16 *
 							b_SelectedCounter)) &
 					0xFFFFU);
 			} else {
@@ -4431,22 +4431,22 @@ INT i_APCI1710_Read16BitCounterValue(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_Read32BitCounterValue                 |
-|                                       (BYTE_     b_BoardHandle,            |
-|                                        BYTE_     b_ModulNbr,               |
+|                                       (unsigned char_     b_BoardHandle,            |
+|                                        unsigned char_     b_ModulNbr,               |
 |                                        PULONG_ pul_CounterValue)           |
 +----------------------------------------------------------------------------+
 | Task              : Latch the 32-Bit counter from selected module          |
 |                     (b_ModulNbr) in to the first latch register and return |
 |                     the latched value.                                     |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle     : Handle of board APCI-1710    |
-|                     BYTE_ b_ModulNbr        : Module number to configure   |
+| Input Parameters  : unsigned char_ b_BoardHandle     : Handle of board APCI-1710    |
+|                     unsigned char_ b_ModulNbr        : Module number to configure   |
 |                                              (0 to 3)                      |
 +----------------------------------------------------------------------------+
 | Output Parameters : PULONG_  pul_CounterValue : 32-Bit counter value       |
@@ -4459,10 +4459,10 @@ INT i_APCI1710_Read16BitCounterValue(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_Read32BitCounterValue(struct comedi_device * dev,
-	BYTE b_ModulNbr, PULONG pul_CounterValue)
+int i_APCI1710_Read32BitCounterValue(struct comedi_device *dev,
+	unsigned char b_ModulNbr, unsigned int *pul_CounterValue)
 {
-	INT i_ReturnValue = 0;
+	int i_ReturnValue = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -4507,22 +4507,22 @@ INT i_APCI1710_Read32BitCounterValue(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
-| Function Name     : _INT_ i_APCI1710_GetIndexStatus (BYTE_   b_BoardHandle,|
-|                                                      BYTE_   b_ModulNbr,   |
-|                                                      PBYTE_ pb_IndexStatus)|
+| Function Name     : _INT_ i_APCI1710_GetIndexStatus (unsigned char_   b_BoardHandle,|
+|                                                      unsigned char_   b_ModulNbr,   |
+|                                                      unsigned char *_ pb_IndexStatus)|
 +----------------------------------------------------------------------------+
 | Task              : Return the index status                                |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle     : Handle of board APCI-1710    |
-|                     BYTE_ b_ModulNbr        : Module number to configure   |
+| Input Parameters  : unsigned char_ b_BoardHandle     : Handle of board APCI-1710    |
+|                     unsigned char_ b_ModulNbr        : Module number to configure   |
 |                                               (0 to 3)                     |
 +----------------------------------------------------------------------------+
-| Output Parameters : PBYTE_ pb_IndexStatus   : 0 : No INDEX occur           |
+| Output Parameters : unsigned char *_ pb_IndexStatus   : 0 : No INDEX occur           |
 |                                               1 : A INDEX occur            |
 +----------------------------------------------------------------------------+
 | Return Value      :  0: No error                                           |
@@ -4535,11 +4535,11 @@ INT i_APCI1710_Read32BitCounterValue(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_GetIndexStatus(struct comedi_device * dev,
-	BYTE b_ModulNbr, PBYTE pb_IndexStatus)
+int i_APCI1710_GetIndexStatus(struct comedi_device *dev,
+	unsigned char b_ModulNbr, unsigned char *pb_IndexStatus)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_StatusReg = 0;
+	int i_ReturnValue = 0;
+	unsigned int dw_StatusReg = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -4563,7 +4563,7 @@ INT i_APCI1710_GetIndexStatus(struct comedi_device * dev,
 				dw_StatusReg = inl(devpriv->s_BoardInfos.
 					ui_Address + 12 + (64 * b_ModulNbr));
 
-				*pb_IndexStatus = (BYTE) (dw_StatusReg & 1);
+				*pb_IndexStatus = (unsigned char) (dw_StatusReg & 1);
 			} else {
 		 /*************************************************************/
 				/* Index not initialised see function "i_APCI1710_InitIndex" */
@@ -4590,23 +4590,23 @@ INT i_APCI1710_GetIndexStatus(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_GetReferenceStatus                    |
-|                                                (BYTE_   b_BoardHandle,     |
-|                                                 BYTE_   b_ModulNbr,        |
-|                                                 PBYTE_ pb_ReferenceStatus) |
+|                                                (unsigned char_   b_BoardHandle,     |
+|                                                 unsigned char_   b_ModulNbr,        |
+|                                                 unsigned char *_ pb_ReferenceStatus) |
 +----------------------------------------------------------------------------+
 | Task              : Return the reference status                            |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle     : Handle of board APCI-1710    |
-|                     BYTE_ b_ModulNbr        : Module number to configure   |
+| Input Parameters  : unsigned char_ b_BoardHandle     : Handle of board APCI-1710    |
+|                     unsigned char_ b_ModulNbr        : Module number to configure   |
 |                                               (0 to 3)                     |
 +----------------------------------------------------------------------------+
-| Output Parameters : PBYTE_ pb_ReferenceStatus   : 0 : No REFERENCE occur   |
+| Output Parameters : unsigned char *_ pb_ReferenceStatus   : 0 : No REFERENCE occur   |
 |                                                   1 : A REFERENCE occur    |
 +----------------------------------------------------------------------------+
 | Return Value      :  0: No error                                           |
@@ -4619,11 +4619,11 @@ INT i_APCI1710_GetIndexStatus(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_GetReferenceStatus(struct comedi_device * dev,
-	BYTE b_ModulNbr, PBYTE pb_ReferenceStatus)
+int i_APCI1710_GetReferenceStatus(struct comedi_device *dev,
+	unsigned char b_ModulNbr, unsigned char *pb_ReferenceStatus)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_StatusReg = 0;
+	int i_ReturnValue = 0;
+	unsigned int dw_StatusReg = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -4649,7 +4649,7 @@ INT i_APCI1710_GetReferenceStatus(struct comedi_device * dev,
 					ui_Address + 24 + (64 * b_ModulNbr));
 
 				*pb_ReferenceStatus =
-					(BYTE) (~dw_StatusReg & 1);
+					(unsigned char) (~dw_StatusReg & 1);
 			} else {
 		 /*********************************************************************/
 				/* Reference not initialised see function "i_APCI1710_InitReference" */
@@ -4676,23 +4676,23 @@ INT i_APCI1710_GetReferenceStatus(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_GetUASStatus                          |
-|                               (BYTE_   b_BoardHandle,                      |
-|                                BYTE_   b_ModulNbr,                         |
-|                                PBYTE_ pb_UASStatus)                        |
+|                               (unsigned char_   b_BoardHandle,                      |
+|                                unsigned char_   b_ModulNbr,                         |
+|                                unsigned char *_ pb_UASStatus)                        |
 +----------------------------------------------------------------------------+
 | Task              : Return the error signal (UAS) status                   |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle     : Handle of board APCI-1710    |
-|                     BYTE_ b_ModulNbr        : Module number to configure   |
+| Input Parameters  : unsigned char_ b_BoardHandle     : Handle of board APCI-1710    |
+|                     unsigned char_ b_ModulNbr        : Module number to configure   |
 |                                               (0 to 3)                     |
 +----------------------------------------------------------------------------+
-| Output Parameters : PBYTE_ pb_UASStatus      : 0 : UAS is low "0"          |
+| Output Parameters : unsigned char *_ pb_UASStatus      : 0 : UAS is low "0"          |
 |                                                1 : UAS is high "1"         |
 +----------------------------------------------------------------------------+
 | Return Value      :  0: No error                                           |
@@ -4703,11 +4703,11 @@ INT i_APCI1710_GetReferenceStatus(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_GetUASStatus(struct comedi_device * dev,
-	BYTE b_ModulNbr, PBYTE pb_UASStatus)
+int i_APCI1710_GetUASStatus(struct comedi_device *dev,
+	unsigned char b_ModulNbr, unsigned char *pb_UASStatus)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_StatusReg = 0;
+	int i_ReturnValue = 0;
+	unsigned int dw_StatusReg = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -4724,7 +4724,7 @@ INT i_APCI1710_GetUASStatus(struct comedi_device * dev,
 			dw_StatusReg = inl(devpriv->s_BoardInfos.
 				ui_Address + 24 + (64 * b_ModulNbr));
 
-			*pb_UASStatus = (BYTE) ((dw_StatusReg >> 1) & 1);
+			*pb_UASStatus = (unsigned char) ((dw_StatusReg >> 1) & 1);
 		} else {
 	      /****************************************/
 			/* Counter not initialised see function */
@@ -4744,23 +4744,23 @@ INT i_APCI1710_GetUASStatus(struct comedi_device * dev,
 
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_GetCBStatus                           |
-|                               (BYTE_   b_BoardHandle,                      |
-|                                BYTE_   b_ModulNbr,                         |
-|                                PBYTE_ pb_CBStatus)                         |
+|                               (unsigned char_   b_BoardHandle,                      |
+|                                unsigned char_   b_ModulNbr,                         |
+|                                unsigned char *_ pb_CBStatus)                         |
 +----------------------------------------------------------------------------+
 | Task              : Return the counter overflow status                     |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle     : Handle of board APCI-1710    |
-|                     BYTE_ b_ModulNbr        : Module number to configure   |
+| Input Parameters  : unsigned char_ b_BoardHandle     : Handle of board APCI-1710    |
+|                     unsigned char_ b_ModulNbr        : Module number to configure   |
 |                                               (0 to 3)                     |
 +----------------------------------------------------------------------------+
-| Output Parameters : PBYTE_ pb_CBStatus      : 0 : Counter no overflow      |
+| Output Parameters : unsigned char *_ pb_CBStatus      : 0 : Counter no overflow      |
 |                                               1 : Counter overflow         |
 +----------------------------------------------------------------------------+
 | Return Value      :  0: No error                                           |
@@ -4771,11 +4771,11 @@ INT i_APCI1710_GetUASStatus(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_GetCBStatus(struct comedi_device * dev,
-	BYTE b_ModulNbr, PBYTE pb_CBStatus)
+int i_APCI1710_GetCBStatus(struct comedi_device *dev,
+	unsigned char b_ModulNbr, unsigned char *pb_CBStatus)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_StatusReg = 0;
+	int i_ReturnValue = 0;
+	unsigned int dw_StatusReg = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -4792,7 +4792,7 @@ INT i_APCI1710_GetCBStatus(struct comedi_device * dev,
 			dw_StatusReg = inl(devpriv->s_BoardInfos.
 				ui_Address + 16 + (64 * b_ModulNbr));
 
-			*pb_CBStatus = (BYTE) (dw_StatusReg & 1);
+			*pb_CBStatus = (unsigned char) (dw_StatusReg & 1);
 
 		} else {
 	      /****************************************/
@@ -4812,31 +4812,31 @@ INT i_APCI1710_GetCBStatus(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_Get16BitCBStatus                      |
-|					(BYTE_     b_BoardHandle,            |
-|					 BYTE_     b_ModulNbr,               |
-|					 PBYTE_ pb_CBStatusCounter0,         |
-|					 PBYTE_ pb_CBStatusCounter1)         |
+|					(unsigned char_     b_BoardHandle,            |
+|					 unsigned char_     b_ModulNbr,               |
+|					 unsigned char *_ pb_CBStatusCounter0,         |
+|					 unsigned char *_ pb_CBStatusCounter1)         |
 +----------------------------------------------------------------------------+
 | Task              : Returns the counter overflow (counter initialised to   |
 |		      2*16-bit) status from selected incremental counter     |
 |		      module                                                 |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle     : Handle of board APCI-1710    |
-|                     BYTE_ b_ModulNbr        : Module number to configure   |
+| Input Parameters  : unsigned char_ b_BoardHandle     : Handle of board APCI-1710    |
+|                     unsigned char_ b_ModulNbr        : Module number to configure   |
 |                                               (0 to 3)                     |
 +----------------------------------------------------------------------------+
-| Output Parameters : PBYTE_ pb_CBStatusCounter0 : 0 : No overflow occur for |
+| Output Parameters : unsigned char *_ pb_CBStatusCounter0 : 0 : No overflow occur for |
 |						       the first 16-bit      |
 |						       counter               |
 |						   1 : Overflow occur for the|
 |						       first 16-bit counter  |
-|		      PBYTE_ pb_CBStatusCounter1 : 0 : No overflow occur for |
+|		      unsigned char *_ pb_CBStatusCounter1 : 0 : No overflow occur for |
 |						       the second 16-bit     |
 |						       counter               |
 |						   1 : Overflow occur for the|
@@ -4853,11 +4853,11 @@ INT i_APCI1710_GetCBStatus(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_Get16BitCBStatus(struct comedi_device * dev,
-	BYTE b_ModulNbr, PBYTE pb_CBStatusCounter0, PBYTE pb_CBStatusCounter1)
+int i_APCI1710_Get16BitCBStatus(struct comedi_device *dev,
+	unsigned char b_ModulNbr, unsigned char *pb_CBStatusCounter0, unsigned char *pb_CBStatusCounter1)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_StatusReg = 0;
+	int i_ReturnValue = 0;
+	unsigned int dw_StatusReg = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -4894,20 +4894,20 @@ INT i_APCI1710_Get16BitCBStatus(struct comedi_device * dev,
 						(64 * b_ModulNbr));
 
 					*pb_CBStatusCounter1 =
-						(BYTE) ((dw_StatusReg >> 0) &
+						(unsigned char) ((dw_StatusReg >> 0) &
 						1);
 					*pb_CBStatusCounter0 =
-						(BYTE) ((dw_StatusReg >> 1) &
+						(unsigned char) ((dw_StatusReg >> 1) &
 						1);
-				}	// if ((ps_APCI1710Variable->s_Board [b_BoardHandle].s_BoardInfos.dw_MolduleConfiguration [b_ModulNbr] & 0xFFFF) >= 0x3136)
+				}	/*  if ((ps_APCI1710Variable->s_Board [b_BoardHandle].s_BoardInfos.dw_MolduleConfiguration [b_ModulNbr] & 0xFFFF) >= 0x3136) */
 				else {
 		    /****************************/
 					/* Firmware revision error  */
 		    /****************************/
 
 					i_ReturnValue = -5;
-				}	// if ((ps_APCI1710Variable->s_Board [b_BoardHandle].s_BoardInfos.dw_MolduleConfiguration [b_ModulNbr] & 0xFFFF) >= 0x3136)
-			}	// if ((ps_APCI1710Variable->s_Board [b_BoardHandle].s_ModuleInfo [b_ModulNbr].s_SiemensCounterInfo.s_ModeRegister.s_ByteModeRegister.b_ModeRegister1 & 0x10) == 0x10)
+				}	/*  if ((ps_APCI1710Variable->s_Board [b_BoardHandle].s_BoardInfos.dw_MolduleConfiguration [b_ModulNbr] & 0xFFFF) >= 0x3136) */
+			}	/*  if ((ps_APCI1710Variable->s_Board [b_BoardHandle].s_ModuleInfo [b_ModulNbr].s_SiemensCounterInfo.s_ModeRegister.s_ByteModeRegister.b_ModeRegister1 & 0x10) == 0x10) */
 			else {
 		 /********************************************/
 				/* Counter not initialised to 2*16-bit mode */
@@ -4916,8 +4916,8 @@ INT i_APCI1710_Get16BitCBStatus(struct comedi_device * dev,
 
 				DPRINTK("Counter not initialised\n");
 				i_ReturnValue = -4;
-			}	// if ((ps_APCI1710Variable->s_Board [b_BoardHandle].s_ModuleInfo [b_ModulNbr].s_SiemensCounterInfo.s_ModeRegister.s_ByteModeRegister.b_ModeRegister1 & 0x10) == 0x10)
-		}		// if (ps_APCI1710Variable->s_Board [b_BoardHandle].s_ModuleInfo [b_ModulNbr].s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1)
+			}	/*  if ((ps_APCI1710Variable->s_Board [b_BoardHandle].s_ModuleInfo [b_ModulNbr].s_SiemensCounterInfo.s_ModeRegister.s_ByteModeRegister.b_ModeRegister1 & 0x10) == 0x10) */
+		}		/*  if (ps_APCI1710Variable->s_Board [b_BoardHandle].s_ModuleInfo [b_ModulNbr].s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) */
 		else {
 	      /****************************************/
 			/* Counter not initialised see function */
@@ -4926,8 +4926,8 @@ INT i_APCI1710_Get16BitCBStatus(struct comedi_device * dev,
 
 			DPRINTK("Counter not initialised\n");
 			i_ReturnValue = -3;
-		}		// if (ps_APCI1710Variable->s_Board [b_BoardHandle].s_ModuleInfo [b_ModulNbr].s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1)
-	}			// if (b_ModulNbr < 4)
+		}		/*  if (ps_APCI1710Variable->s_Board [b_BoardHandle].s_ModuleInfo [b_ModulNbr].s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) */
+	}			/*  if (b_ModulNbr < 4) */
 	else {
 	   /*************************************************/
 		/* The selected module number parameter is wrong */
@@ -4935,25 +4935,25 @@ INT i_APCI1710_Get16BitCBStatus(struct comedi_device * dev,
 
 		DPRINTK("The selected module number parameter is wrong\n");
 		i_ReturnValue = -2;
-	}			// if (b_ModulNbr < 4)
+	}			/*  if (b_ModulNbr < 4) */
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_GetUDStatus                           |
-|                               (BYTE_   b_BoardHandle,                      |
-|                                BYTE_   b_ModulNbr,                         |
-|                                PBYTE_ pb_UDStatus)                         |
+|                               (unsigned char_   b_BoardHandle,                      |
+|                                unsigned char_   b_ModulNbr,                         |
+|                                unsigned char *_ pb_UDStatus)                         |
 +----------------------------------------------------------------------------+
 | Task              : Return the counter progress status                     |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle     : Handle of board APCI-1710    |
-|                     BYTE_ b_ModulNbr        : Module number to configure   |
+| Input Parameters  : unsigned char_ b_BoardHandle     : Handle of board APCI-1710    |
+|                     unsigned char_ b_ModulNbr        : Module number to configure   |
 |                                               (0 to 3)                     |
 +----------------------------------------------------------------------------+
-| Output Parameters : PBYTE_ pb_UDStatus      : 0 : Counter progress in the  |
+| Output Parameters : unsigned char *_ pb_UDStatus      : 0 : Counter progress in the  |
 |                                                   selected mode down       |
 |                                               1 : Counter progress in the  |
 |                                                   selected mode up         |
@@ -4966,11 +4966,11 @@ INT i_APCI1710_Get16BitCBStatus(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_GetUDStatus(struct comedi_device * dev,
-	BYTE b_ModulNbr, PBYTE pb_UDStatus)
+int i_APCI1710_GetUDStatus(struct comedi_device *dev,
+	unsigned char b_ModulNbr, unsigned char *pb_UDStatus)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_StatusReg = 0;
+	int i_ReturnValue = 0;
+	unsigned int dw_StatusReg = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -4987,7 +4987,7 @@ INT i_APCI1710_GetUDStatus(struct comedi_device * dev,
 			dw_StatusReg = inl(devpriv->s_BoardInfos.
 				ui_Address + 24 + (64 * b_ModulNbr));
 
-			*pb_UDStatus = (BYTE) ((dw_StatusReg >> 2) & 1);
+			*pb_UDStatus = (unsigned char) ((dw_StatusReg >> 2) & 1);
 
 		} else {
 	      /****************************************/
@@ -5007,24 +5007,24 @@ INT i_APCI1710_GetUDStatus(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_GetInterruptUDLatchedStatus           |
-|                               (BYTE_   b_BoardHandle,                      |
-|                                BYTE_   b_ModulNbr,                         |
-|                                PBYTE_ pb_UDStatus)                         |
+|                               (unsigned char_   b_BoardHandle,                      |
+|                                unsigned char_   b_ModulNbr,                         |
+|                                unsigned char *_ pb_UDStatus)                         |
 +----------------------------------------------------------------------------+
 | Task              : Return the counter progress latched status after a     |
 |                     index interrupt occur.                                 |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle     : Handle of board APCI-1710    |
-|                     BYTE_ b_ModulNbr        : Module number to configure   |
+| Input Parameters  : unsigned char_ b_BoardHandle     : Handle of board APCI-1710    |
+|                     unsigned char_ b_ModulNbr        : Module number to configure   |
 |                                               (0 to 3)                     |
 +----------------------------------------------------------------------------+
-| Output Parameters : PBYTE_ pb_UDStatus      : 0 : Counter progress in the  |
+| Output Parameters : unsigned char *_ pb_UDStatus      : 0 : Counter progress in the  |
 |                                                   selected mode down       |
 |                                               1 : Counter progress in the  |
 |                                                   selected mode up         |
@@ -5040,11 +5040,11 @@ INT i_APCI1710_GetUDStatus(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_GetInterruptUDLatchedStatus(struct comedi_device * dev,
-	BYTE b_ModulNbr, PBYTE pb_UDStatus)
+int i_APCI1710_GetInterruptUDLatchedStatus(struct comedi_device *dev,
+	unsigned char b_ModulNbr, unsigned char *pb_UDStatus)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_StatusReg = 0;
+	int i_ReturnValue = 0;
+	unsigned int dw_StatusReg = 0;
 
 	/**************************/
 	/* Test the module number */
@@ -5074,7 +5074,7 @@ INT i_APCI1710_GetInterruptUDLatchedStatus(struct comedi_device * dev,
 				dw_StatusReg = inl(devpriv->s_BoardInfos.
 					ui_Address + 12 + (64 * b_ModulNbr));
 
-				*pb_UDStatus = (BYTE) ((dw_StatusReg >> 1) & 1);
+				*pb_UDStatus = (unsigned char) ((dw_StatusReg >> 1) & 1);
 			} else {
 		    /****************************/
 				/* No index interrupt occur */
@@ -5100,26 +5100,26 @@ INT i_APCI1710_GetInterruptUDLatchedStatus(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 	/*
 	   +----------------------------------------------------------------------------+
 	   | Function Name     : _INT_ i_APCI1710_ReadFrequencyMeasurement              |
-	   |                            (BYTE_            b_BoardHandle,             |
-	   |                             BYTE_            b_ModulNbr,                |
-	   |                             PBYTE_          pb_Status,                  |
+	   |                            (unsigned char_            b_BoardHandle,             |
+	   |                             unsigned char_            b_ModulNbr,                |
+	   |                             unsigned char *_          pb_Status,                  |
 	   |                             PULONG_        pul_ReadValue)               |
 	   +----------------------------------------------------------------------------+
 	   | Task              : Returns the status (pb_Status) and the number of       |
 	   |                  increments in the set time.                            |
 	   |                  See function " i_APCI1710_InitFrequencyMeasurement "   |
 	   +----------------------------------------------------------------------------+
-	   | Input Parameters  : BYTE_  b_BoardHandle    : Handle of board APCI-1710    |
-	   |                  BYTE_  b_ModulNbr       : Number of the module to be   |
+	   | Input Parameters  : unsigned char_  b_BoardHandle    : Handle of board APCI-1710    |
+	   |                  unsigned char_  b_ModulNbr       : Number of the module to be   |
 	   |                                            configured (0 to 3)          |
 	   +----------------------------------------------------------------------------+
-	   | Output Parameters : PBYTE_ pb_Status     : Returns the frequency        |
+	   | Output Parameters : unsigned char *_ pb_Status     : Returns the frequency        |
 	   |                                            measurement status           |
 	   |                                            0 : Counting cycle not       |
 	   |                                                started.                 |
@@ -5127,7 +5127,7 @@ INT i_APCI1710_GetInterruptUDLatchedStatus(struct comedi_device * dev,
 	   |                                            2 : Counting cycle stopped.  |
 	   |                                                The measurement cycle is |
 	   |                                                completed.               |
-	   |                  PBYTE_ pb_UDStatus      : 0 : Counter progress in the  |
+	   |                  unsigned char *_ pb_UDStatus      : 0 : Counter progress in the  |
 	   |                                                   selected mode down       |
 	   |                                               1 : Counter progress in the  |
 	   |                                                   selected mode up         |
@@ -5145,13 +5145,13 @@ INT i_APCI1710_GetInterruptUDLatchedStatus(struct comedi_device * dev,
 	   +----------------------------------------------------------------------------+
 	 */
 
-INT i_APCI1710_ReadFrequencyMeasurement(struct comedi_device * dev,
-	BYTE b_ModulNbr,
-	PBYTE pb_Status, PBYTE pb_UDStatus, PULONG pul_ReadValue)
+int i_APCI1710_ReadFrequencyMeasurement(struct comedi_device *dev,
+	unsigned char b_ModulNbr,
+	unsigned char *pb_Status, unsigned char *pb_UDStatus, unsigned int *pul_ReadValue)
 {
-	INT i_ReturnValue = 0;
-	UINT ui_16BitValue;
-	DWORD dw_StatusReg;
+	int i_ReturnValue = 0;
+	unsigned int ui_16BitValue;
+	unsigned int dw_StatusReg;
 
 	/**************************/
 	/* Test the module number */
@@ -5198,7 +5198,7 @@ INT i_APCI1710_ReadFrequencyMeasurement(struct comedi_device * dev,
 					if (dw_StatusReg & 1) {
 						*pb_Status = 2;
 						*pb_UDStatus =
-							(BYTE) ((dw_StatusReg >>
+							(unsigned char) ((dw_StatusReg >>
 								1) & 3);
 
 		       /******************/
@@ -5224,7 +5224,7 @@ INT i_APCI1710_ReadFrequencyMeasurement(struct comedi_device * dev,
 								if ((*pul_ReadValue & 0xFFFFU) != 0) {
 									ui_16BitValue
 										=
-										(UINT)
+										(unsigned int)
 										*
 										pul_ReadValue
 										&
@@ -5247,7 +5247,7 @@ INT i_APCI1710_ReadFrequencyMeasurement(struct comedi_device * dev,
 								if ((*pul_ReadValue & 0xFFFF0000UL) != 0) {
 									ui_16BitValue
 										=
-										(UINT)
+										(unsigned int)
 										(
 										(*pul_ReadValue
 											>>
@@ -5281,7 +5281,7 @@ INT i_APCI1710_ReadFrequencyMeasurement(struct comedi_device * dev,
 								if ((*pul_ReadValue & 0xFFFF0000UL) != 0) {
 									ui_16BitValue
 										=
-										(UINT)
+										(unsigned int)
 										(
 										(*pul_ReadValue
 											>>
@@ -5307,7 +5307,7 @@ INT i_APCI1710_ReadFrequencyMeasurement(struct comedi_device * dev,
 									if ((*pul_ReadValue & 0xFFFFU) != 0) {
 										ui_16BitValue
 											=
-											(UINT)
+											(unsigned int)
 											*
 											pul_ReadValue
 											&
@@ -5359,5 +5359,5 @@ INT i_APCI1710_ReadFrequencyMeasurement(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.h
index 5153cf68665..7b481107fe1 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.h
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.h
@@ -132,140 +132,140 @@
 #define APCI1710_INCCPT_DISABLEFREQUENCYMEASUREMENT		409
 
 /************ Main Functions *************/
-INT i_APCI1710_InsnConfigINCCPT(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI1710_InsnConfigINCCPT(struct comedi_device *dev, struct comedi_subdevice *s,
 				struct comedi_insn *insn, unsigned int * data);
 
-INT i_APCI1710_InsnBitsINCCPT(struct comedi_device *dev, struct comedi_subdevice * s,
+int i_APCI1710_InsnBitsINCCPT(struct comedi_device *dev, struct comedi_subdevice * s,
 			      struct comedi_insn *insn, unsigned int * data);
 
-INT i_APCI1710_InsnWriteINCCPT(struct comedi_device *dev, struct comedi_subdevice * s,
+int i_APCI1710_InsnWriteINCCPT(struct comedi_device *dev, struct comedi_subdevice * s,
 			       struct comedi_insn *insn, unsigned int * data);
 
-INT i_APCI1710_InsnReadINCCPT(struct comedi_device *dev, struct comedi_subdevice * s,
+int i_APCI1710_InsnReadINCCPT(struct comedi_device *dev, struct comedi_subdevice * s,
 			      struct comedi_insn *insn, unsigned int * data);
 
 /*********** Supplementary Functions********/
 
 /* INSN CONFIG */
-INT i_APCI1710_InitCounter(struct comedi_device *dev,
-			   BYTE b_ModulNbr,
-			   BYTE b_CounterRange,
-			   BYTE b_FirstCounterModus,
-			   BYTE b_FirstCounterOption,
-			   BYTE b_SecondCounterModus,
-			   BYTE b_SecondCounterOption);
-
-INT i_APCI1710_CounterAutoTest(struct comedi_device *dev, PBYTE pb_TestStatus);
-
-INT i_APCI1710_InitIndex(struct comedi_device *dev,
-			 BYTE b_ModulNbr,
-			 BYTE b_ReferenceAction,
-			 BYTE b_IndexOperation, BYTE b_AutoMode,
-			 BYTE b_InterruptEnable);
-
-INT i_APCI1710_InitReference(struct comedi_device *dev,
-			     BYTE b_ModulNbr, BYTE b_ReferenceLevel);
-
-INT i_APCI1710_InitExternalStrobe(struct comedi_device *dev,
-				  BYTE b_ModulNbr, BYTE b_ExternalStrobe,
-				  BYTE b_ExternalStrobeLevel);
-
-INT i_APCI1710_InitCompareLogic(struct comedi_device *dev,
-				BYTE b_ModulNbr, UINT ui_CompareValue);
-
-INT i_APCI1710_InitFrequencyMeasurement(struct comedi_device *dev,
-					BYTE b_ModulNbr,
-					BYTE b_PCIInputClock,
-					BYTE b_TimingUnity,
-					ULONG ul_TimingInterval,
-					PULONG pul_RealTimingInterval);
+int i_APCI1710_InitCounter(struct comedi_device *dev,
+			   unsigned char b_ModulNbr,
+			   unsigned char b_CounterRange,
+			   unsigned char b_FirstCounterModus,
+			   unsigned char b_FirstCounterOption,
+			   unsigned char b_SecondCounterModus,
+			   unsigned char b_SecondCounterOption);
+
+int i_APCI1710_CounterAutoTest(struct comedi_device *dev, unsigned char * pb_TestStatus);
+
+int i_APCI1710_InitIndex(struct comedi_device *dev,
+			 unsigned char b_ModulNbr,
+			 unsigned char b_ReferenceAction,
+			 unsigned char b_IndexOperation, unsigned char b_AutoMode,
+			 unsigned char b_InterruptEnable);
+
+int i_APCI1710_InitReference(struct comedi_device *dev,
+			     unsigned char b_ModulNbr, unsigned char b_ReferenceLevel);
+
+int i_APCI1710_InitExternalStrobe(struct comedi_device *dev,
+				  unsigned char b_ModulNbr, unsigned char b_ExternalStrobe,
+				  unsigned char b_ExternalStrobeLevel);
+
+int i_APCI1710_InitCompareLogic(struct comedi_device *dev,
+				unsigned char b_ModulNbr, unsigned int ui_CompareValue);
+
+int i_APCI1710_InitFrequencyMeasurement(struct comedi_device *dev,
+					unsigned char b_ModulNbr,
+					unsigned char b_PCIInputClock,
+					unsigned char b_TimingUnity,
+					unsigned int ul_TimingInterval,
+					unsigned int *pul_RealTimingInterval);
 
 /* INSN BITS */
-INT i_APCI1710_ClearCounterValue(struct comedi_device *dev, BYTE b_ModulNbr);
+int i_APCI1710_ClearCounterValue(struct comedi_device *dev, unsigned char b_ModulNbr);
 
-INT i_APCI1710_ClearAllCounterValue(struct comedi_device *dev);
+int i_APCI1710_ClearAllCounterValue(struct comedi_device *dev);
 
-INT i_APCI1710_SetInputFilter(struct comedi_device *dev,
-			      BYTE b_ModulNbr, BYTE b_PCIInputClock,
-			      BYTE b_Filter);
+int i_APCI1710_SetInputFilter(struct comedi_device *dev,
+			      unsigned char b_ModulNbr, unsigned char b_PCIInputClock,
+			      unsigned char b_Filter);
 
-INT i_APCI1710_LatchCounter(struct comedi_device *dev,
-			    BYTE b_ModulNbr, BYTE b_LatchReg);
+int i_APCI1710_LatchCounter(struct comedi_device *dev,
+			    unsigned char b_ModulNbr, unsigned char b_LatchReg);
 
-INT i_APCI1710_SetIndexAndReferenceSource(struct comedi_device *dev,
-					  BYTE b_ModulNbr,
-					  BYTE b_SourceSelection);
+int i_APCI1710_SetIndexAndReferenceSource(struct comedi_device *dev,
+					  unsigned char b_ModulNbr,
+					  unsigned char b_SourceSelection);
 
-INT i_APCI1710_SetDigitalChlOn(struct comedi_device *dev, BYTE b_ModulNbr);
+int i_APCI1710_SetDigitalChlOn(struct comedi_device *dev, unsigned char b_ModulNbr);
 
-INT i_APCI1710_SetDigitalChlOff(struct comedi_device *dev, BYTE b_ModulNbr);
+int i_APCI1710_SetDigitalChlOff(struct comedi_device *dev, unsigned char b_ModulNbr);
 
 /* INSN WRITE */
-INT i_APCI1710_EnableLatchInterrupt(struct comedi_device *dev, BYTE b_ModulNbr);
+int i_APCI1710_EnableLatchInterrupt(struct comedi_device *dev, unsigned char b_ModulNbr);
 
-INT i_APCI1710_DisableLatchInterrupt(struct comedi_device *dev, BYTE b_ModulNbr);
+int i_APCI1710_DisableLatchInterrupt(struct comedi_device *dev, unsigned char b_ModulNbr);
 
-INT i_APCI1710_Write16BitCounterValue(struct comedi_device *dev,
-				      BYTE b_ModulNbr, BYTE b_SelectedCounter,
-				      UINT ui_WriteValue);
+int i_APCI1710_Write16BitCounterValue(struct comedi_device *dev,
+				      unsigned char b_ModulNbr, unsigned char b_SelectedCounter,
+				      unsigned int ui_WriteValue);
 
-INT i_APCI1710_Write32BitCounterValue(struct comedi_device *dev,
-				      BYTE b_ModulNbr, ULONG ul_WriteValue);
+int i_APCI1710_Write32BitCounterValue(struct comedi_device *dev,
+				      unsigned char b_ModulNbr, unsigned int ul_WriteValue);
 
-INT i_APCI1710_EnableIndex(struct comedi_device *dev, BYTE b_ModulNbr);
+int i_APCI1710_EnableIndex(struct comedi_device *dev, unsigned char b_ModulNbr);
 
-INT i_APCI1710_DisableIndex(struct comedi_device *dev, BYTE b_ModulNbr);
+int i_APCI1710_DisableIndex(struct comedi_device *dev, unsigned char b_ModulNbr);
 
-INT i_APCI1710_EnableCompareLogic(struct comedi_device *dev, BYTE b_ModulNbr);
+int i_APCI1710_EnableCompareLogic(struct comedi_device *dev, unsigned char b_ModulNbr);
 
-INT i_APCI1710_DisableCompareLogic(struct comedi_device *dev, BYTE b_ModulNbr);
+int i_APCI1710_DisableCompareLogic(struct comedi_device *dev, unsigned char b_ModulNbr);
 
-INT i_APCI1710_EnableFrequencyMeasurement(struct comedi_device *dev,
-					  BYTE b_ModulNbr,
-					  BYTE b_InterruptEnable);
+int i_APCI1710_EnableFrequencyMeasurement(struct comedi_device *dev,
+					  unsigned char b_ModulNbr,
+					  unsigned char b_InterruptEnable);
 
-INT i_APCI1710_DisableFrequencyMeasurement(struct comedi_device *dev,
-					   BYTE b_ModulNbr);
+int i_APCI1710_DisableFrequencyMeasurement(struct comedi_device *dev,
+					   unsigned char b_ModulNbr);
 
 /* INSN READ */
-INT i_APCI1710_ReadLatchRegisterStatus(struct comedi_device *dev,
-				       BYTE b_ModulNbr, BYTE b_LatchReg,
-				       PBYTE pb_LatchStatus);
+int i_APCI1710_ReadLatchRegisterStatus(struct comedi_device *dev,
+				       unsigned char b_ModulNbr, unsigned char b_LatchReg,
+				       unsigned char *pb_LatchStatus);
 
-INT i_APCI1710_ReadLatchRegisterValue(struct comedi_device *dev,
-				      BYTE b_ModulNbr, BYTE b_LatchReg,
-				      PULONG pul_LatchValue);
+int i_APCI1710_ReadLatchRegisterValue(struct comedi_device *dev,
+				      unsigned char b_ModulNbr, unsigned char b_LatchReg,
+				      unsigned int *pul_LatchValue);
 
-INT i_APCI1710_Read16BitCounterValue(struct comedi_device *dev,
-				     BYTE b_ModulNbr, BYTE b_SelectedCounter,
-				     PUINT pui_CounterValue);
+int i_APCI1710_Read16BitCounterValue(struct comedi_device *dev,
+				     unsigned char b_ModulNbr, unsigned char b_SelectedCounter,
+				     unsigned int *pui_CounterValue);
 
-INT i_APCI1710_Read32BitCounterValue(struct comedi_device *dev,
-				     BYTE b_ModulNbr, PULONG pul_CounterValue);
+int i_APCI1710_Read32BitCounterValue(struct comedi_device *dev,
+				     unsigned char b_ModulNbr, unsigned int *pul_CounterValue);
 
-INT i_APCI1710_GetIndexStatus(struct comedi_device *dev,
-			      BYTE b_ModulNbr, PBYTE pb_IndexStatus);
+int i_APCI1710_GetIndexStatus(struct comedi_device *dev,
+			      unsigned char b_ModulNbr, unsigned char *pb_IndexStatus);
 
-INT i_APCI1710_GetReferenceStatus(struct comedi_device *dev,
-				  BYTE b_ModulNbr, PBYTE pb_ReferenceStatus);
+int i_APCI1710_GetReferenceStatus(struct comedi_device *dev,
+				  unsigned char b_ModulNbr, unsigned char *pb_ReferenceStatus);
 
-INT i_APCI1710_GetUASStatus(struct comedi_device *dev,
-			    BYTE b_ModulNbr, PBYTE pb_UASStatus);
+int i_APCI1710_GetUASStatus(struct comedi_device *dev,
+			    unsigned char b_ModulNbr, unsigned char *pb_UASStatus);
 
-INT i_APCI1710_GetCBStatus(struct comedi_device *dev,
-			   BYTE b_ModulNbr, PBYTE pb_CBStatus);
+int i_APCI1710_GetCBStatus(struct comedi_device *dev,
+			   unsigned char b_ModulNbr, unsigned char *pb_CBStatus);
 
-INT i_APCI1710_Get16BitCBStatus(struct comedi_device *dev,
-				BYTE b_ModulNbr, PBYTE pb_CBStatusCounter0,
-				PBYTE pb_CBStatusCounter1);
+int i_APCI1710_Get16BitCBStatus(struct comedi_device *dev,
+				unsigned char b_ModulNbr, unsigned char *pb_CBStatusCounter0,
+				unsigned char *pb_CBStatusCounter1);
 
-INT i_APCI1710_GetUDStatus(struct comedi_device *dev,
-			   BYTE b_ModulNbr, PBYTE pb_UDStatus);
+int i_APCI1710_GetUDStatus(struct comedi_device *dev,
+			   unsigned char b_ModulNbr, unsigned char *pb_UDStatus);
 
-INT i_APCI1710_GetInterruptUDLatchedStatus(struct comedi_device *dev,
-					   BYTE b_ModulNbr, PBYTE pb_UDStatus);
+int i_APCI1710_GetInterruptUDLatchedStatus(struct comedi_device *dev,
+					   unsigned char b_ModulNbr, unsigned char *pb_UDStatus);
 
-INT i_APCI1710_ReadFrequencyMeasurement(struct comedi_device *dev,
-					BYTE b_ModulNbr,
-					PBYTE pb_Status, PBYTE pb_UDStatus,
-					PULONG pul_ReadValue);
+int i_APCI1710_ReadFrequencyMeasurement(struct comedi_device *dev,
+					unsigned char b_ModulNbr,
+					unsigned char *pb_Status, unsigned char *pb_UDStatus,
+					unsigned int *pul_ReadValue);
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.c
index 3ac6a264ef5..0fc2285c9ef 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.c
@@ -3,13 +3,13 @@
 
 Copyright (C) 2004,2005  ADDI-DATA GmbH for the source code of this module.
 
-        ADDI-DATA GmbH
-        Dieselstrasse 3
-        D-77833 Ottersweier
-        Tel: +19(0)7223/9493-0
-        Fax: +49(0)7223/9493-92
-        http://www.addi-data-com
-        info@addi-data.com
+	ADDI-DATA GmbH
+	Dieselstrasse 3
+	D-77833 Ottersweier
+	Tel: +19(0)7223/9493-0
+	Fax: +49(0)7223/9493-92
+	http://www.addi-data-com
+	info@addi-data.com
 
 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
 
@@ -60,11 +60,11 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_InitPulseEncoder                      |
-|                               (BYTE_          b_BoardHandle,               |
-|                                BYTE_          b_ModulNbr,                  |
-|                                BYTE_          b_PulseEncoderNbr,           |
-|                                BYTE_          b_InputLevelSelection,       |
-|                                BYTE_          b_TriggerOutputAction,       |
+|                               (unsigned char_          b_BoardHandle,               |
+|                                unsigned char_          b_ModulNbr,                  |
+|                                unsigned char_          b_PulseEncoderNbr,           |
+|                                unsigned char_          b_InputLevelSelection,       |
+|                                unsigned char_          b_TriggerOutputAction,       |
 |                                ULONG_        ul_StartValue)                |
 +----------------------------------------------------------------------------+
 | Task              : Configure the pulse encoder operating mode selected via|
@@ -74,12 +74,12 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 |                     You must calling this function be for you call any     |
 |                     other function witch access of pulse encoders.         |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle         : Handle of board APCI-1710|
-|                     BYTE_ b_ModulNbr            : Module number to         |
+| Input Parameters  : unsigned char_ b_BoardHandle         : Handle of board APCI-1710|
+|                     unsigned char_ b_ModulNbr            : Module number to         |
 |                                                   configure (0 to 3)       |
-|                     BYTE_ b_PulseEncoderNbr     : Pulse encoder selection  |
+|                     unsigned char_ b_PulseEncoderNbr     : Pulse encoder selection  |
 |                                                   (0 to 3)                 |
-|                     BYTE_ b_InputLevelSelection : Input level selection    |
+|                     unsigned char_ b_InputLevelSelection : Input level selection    |
 |                                                   (0 or 1)                 |
 |                                                       0 : Set pulse encoder|
 |                                                           count the the low|
@@ -87,7 +87,7 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 |                                                       1 : Set pulse encoder|
 |                                                           count the the    |
 |                                                           high level pulse.|
-|                     BYTE_ b_TriggerOutputAction : Digital TRIGGER output   |
+|                     unsigned char_ b_TriggerOutputAction : Digital TRIGGER output   |
 |                                                   action                   |
 |                                                       0 : No action        |
 |                                                       1 : Set the trigger  |
@@ -104,11 +104,11 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 |                                                           encoder          |
 |                     ULONG_ ul_StartValue        : Pulse encoder start value|
 |                                                   (1 to 4294967295)
-	b_ModulNbr				=(BYTE) CR_AREF(insn->chanspec);
-	b_PulseEncoderNbr		=(BYTE) data[0];
-	b_InputLevelSelection	=(BYTE) data[1];
-	b_TriggerOutputAction	=(BYTE) data[2];
-	ul_StartValue			=(ULONG) data[3];
+	b_ModulNbr				=(unsigned char) CR_AREF(insn->chanspec);
+	b_PulseEncoderNbr		=(unsigned char) data[0];
+	b_InputLevelSelection	=(unsigned char) data[1];
+	b_TriggerOutputAction	=(unsigned char) data[2];
+	ul_StartValue			=(unsigned int) data[3];
        |
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
@@ -123,23 +123,23 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InsnConfigInitPulseEncoder(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnConfigInitPulseEncoder(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_IntRegister;
+	int i_ReturnValue = 0;
+	unsigned int dw_IntRegister;
 
-	BYTE b_ModulNbr;
-	BYTE b_PulseEncoderNbr;
-	BYTE b_InputLevelSelection;
-	BYTE b_TriggerOutputAction;
-	ULONG ul_StartValue;
+	unsigned char b_ModulNbr;
+	unsigned char b_PulseEncoderNbr;
+	unsigned char b_InputLevelSelection;
+	unsigned char b_TriggerOutputAction;
+	unsigned int ul_StartValue;
 
-	b_ModulNbr = (BYTE) CR_AREF(insn->chanspec);
-	b_PulseEncoderNbr = (BYTE) data[0];
-	b_InputLevelSelection = (BYTE) data[1];
-	b_TriggerOutputAction = (BYTE) data[2];
-	ul_StartValue = (ULONG) data[3];
+	b_ModulNbr = (unsigned char) CR_AREF(insn->chanspec);
+	b_PulseEncoderNbr = (unsigned char) data[0];
+	b_InputLevelSelection = (unsigned char) data[1];
+	b_TriggerOutputAction = (unsigned char) data[2];
+	ul_StartValue = (unsigned int) data[3];
 
 	i_ReturnValue = insn->n;
 
@@ -346,17 +346,17 @@ INT i_APCI1710_InsnConfigInitPulseEncoder(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_EnablePulseEncoder                    |
-|                                       (BYTE_  b_BoardHandle,               |
-|                                        BYTE_  b_ModulNbr,                  |
-|                                        BYTE_  b_PulseEncoderNbr,           |
-|                                        BYTE_  b_CycleSelection,            |
-|                                        BYTE_  b_InterruptHandling)         |
+|                                       (unsigned char_  b_BoardHandle,               |
+|                                        unsigned char_  b_ModulNbr,                  |
+|                                        unsigned char_  b_PulseEncoderNbr,           |
+|                                        unsigned char_  b_CycleSelection,            |
+|                                        unsigned char_  b_InterruptHandling)         |
 +----------------------------------------------------------------------------+
 | Task              : Enableor disable  the selected pulse encoder (b_PulseEncoderNbr)  |
 |                     from selected module (b_ModulNbr). Each input pulse    |
@@ -365,12 +365,12 @@ INT i_APCI1710_InsnConfigInitPulseEncoder(struct comedi_device * dev,
 |                     interrupt is generated when the pulse encoder has run  |
 |                     down.                                                  |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_   b_BoardHandle       : Handle of board APCI-1710|
-|                     BYTE_   b_ModulNbr          : Module number to         |
+| Input Parameters  : unsigned char_   b_BoardHandle       : Handle of board APCI-1710|
+|                     unsigned char_   b_ModulNbr          : Module number to         |
 |                                                   configure (0 to 3)       |
-|                     BYTE_   b_PulseEncoderNbr   : Pulse encoder selection  |
+|                     unsigned char_   b_PulseEncoderNbr   : Pulse encoder selection  |
 |                                                   (0 to 3)                 |
-|                     BYTE_   b_CycleSelection    : APCI1710_CONTINUOUS:     |
+|                     unsigned char_   b_CycleSelection    : APCI1710_CONTINUOUS:     |
 |                                                       Each time the        |
 |                                                       counting value is set|
 |                                                       on "0", the pulse    |
@@ -381,7 +381,7 @@ INT i_APCI1710_InsnConfigInitPulseEncoder(struct comedi_device * dev,
 |                                                       If the counter is set|
 |                                                       on "0", the pulse    |
 |                                                       encoder is stopped.  |
-|                     BYTE_   b_InterruptHandling : Interrupts can be        |
+|                     unsigned char_   b_InterruptHandling : Interrupts can be        |
 |                                                   generated, when the pulse|
 |                                                   encoder has run down.    |
 |                                                   With this parameter the  |
@@ -393,11 +393,11 @@ INT i_APCI1710_InsnConfigInitPulseEncoder(struct comedi_device * dev,
 |                                                     APCI1710_DISABLE:      |
 |                                                     Interrupts are disabled
 
-  	b_ModulNbr			=(BYTE) CR_AREF(insn->chanspec);
-	b_Action			=(BYTE) data[0];
-	b_PulseEncoderNbr	=(BYTE) data[1];
-	b_CycleSelection	=(BYTE) data[2];
-	b_InterruptHandling	=(BYTE) data[3];|
+	b_ModulNbr			=(unsigned char) CR_AREF(insn->chanspec);
+	b_Action			=(unsigned char) data[0];
+	b_PulseEncoderNbr	=(unsigned char) data[1];
+	b_CycleSelection	=(unsigned char) data[2];
+	b_InterruptHandling	=(unsigned char) data[3];|
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
 +----------------------------------------------------------------------------+
@@ -414,22 +414,22 @@ INT i_APCI1710_InsnConfigInitPulseEncoder(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InsnWriteEnableDisablePulseEncoder(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnWriteEnableDisablePulseEncoder(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = 0;
-	BYTE b_ModulNbr;
-	BYTE b_PulseEncoderNbr;
-	BYTE b_CycleSelection;
-	BYTE b_InterruptHandling;
-	BYTE b_Action;
+	int i_ReturnValue = 0;
+	unsigned char b_ModulNbr;
+	unsigned char b_PulseEncoderNbr;
+	unsigned char b_CycleSelection;
+	unsigned char b_InterruptHandling;
+	unsigned char b_Action;
 
 	i_ReturnValue = insn->n;
-	b_ModulNbr = (BYTE) CR_AREF(insn->chanspec);
-	b_Action = (BYTE) data[0];
-	b_PulseEncoderNbr = (BYTE) data[1];
-	b_CycleSelection = (BYTE) data[2];
-	b_InterruptHandling = (BYTE) data[3];
+	b_ModulNbr = (unsigned char) CR_AREF(insn->chanspec);
+	b_Action = (unsigned char) data[0];
+	b_PulseEncoderNbr = (unsigned char) data[1];
+	b_CycleSelection = (unsigned char) data[2];
+	b_InterruptHandling = (unsigned char) data[3];
 
 	/***********************************/
 	/* Test the selected module number */
@@ -515,7 +515,7 @@ INT i_APCI1710_InsnWriteEnableDisablePulseEncoder(struct comedi_device * dev,
 									| (1UL
 									<<
 									b_PulseEncoderNbr);
-								devpriv->tsk_Current = current;	// Save the current process task structure
+								devpriv->tsk_Current = current;	/*  Save the current process task structure */
 
 							}
 
@@ -629,7 +629,7 @@ INT i_APCI1710_InsnWriteEnableDisablePulseEncoder(struct comedi_device * dev,
 						(64 * b_ModulNbr));
 
 					break;
-				}	// switch End
+				}	/*  switch End */
 
 			} else {
 		 /*********************************/
@@ -656,39 +656,39 @@ INT i_APCI1710_InsnWriteEnableDisablePulseEncoder(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_ReadPulseEncoderStatus                |
-|                                       (BYTE_  b_BoardHandle,               |
-|                                        BYTE_  b_ModulNbr,                  |
-|                                        BYTE_  b_PulseEncoderNbr,           |
-|                                        PBYTE_ pb_Status)                   |
+|                                       (unsigned char_  b_BoardHandle,               |
+|                                        unsigned char_  b_ModulNbr,                  |
+|                                        unsigned char_  b_PulseEncoderNbr,           |
+|                                        unsigned char *_ pb_Status)                   |
 +----------------------------------------------------------------------------+
 | Task    APCI1710_PULSEENCODER_READ          : Reads the pulse encoder status
 											and valuefrom selected pulse     |
 |                     encoder (b_PulseEncoderNbr) from selected module       |
 |                     (b_ModulNbr).                                          |
 +----------------------------------------------------------------------------+
-	BYTE   b_Type; data[0]
+	unsigned char   b_Type; data[0]
    APCI1710_PULSEENCODER_WRITE
  Writes a 32-bit value (ul_WriteValue) into the selected|
 |                     pulse encoder (b_PulseEncoderNbr) from selected module |
 |                     (b_ModulNbr). This operation set the new start pulse   |
 |                     encoder value.
  APCI1710_PULSEENCODER_READ
-| Input Parameters  : BYTE_   b_BoardHandle       : Handle of board APCI-1710|
-|            CRAREF()         BYTE_   b_ModulNbr          : Module number to         |
+| Input Parameters  : unsigned char_   b_BoardHandle       : Handle of board APCI-1710|
+|            CRAREF()         unsigned char_   b_ModulNbr          : Module number to         |
 |                                                   configure (0 to 3)       |
-|              data[1]       BYTE_   b_PulseEncoderNbr   : Pulse encoder selection  |
+|              data[1]       unsigned char_   b_PulseEncoderNbr   : Pulse encoder selection  |
 |                                                   (0 to 3)
    APCI1710_PULSEENCODER_WRITE
 				data[2]		ULONG_ ul_WriteValue        : 32-bit value to be       |
 |                                                   written             |
 +----------------------------------------------------------------------------+
-| Output Parameters : PBYTE_ pb_Status            : Pulse encoder status.    |
+| Output Parameters : unsigned char *_ pb_Status            : Pulse encoder status.    |
 |                                                       0 : No overflow occur|
 |                                                       1 : Overflow occur
 						PULONG_ pul_ReadValue       : Pulse encoder value      |  |
@@ -702,30 +702,30 @@ INT i_APCI1710_InsnWriteEnableDisablePulseEncoder(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-/*_INT_   i_APCI1710_ReadPulseEncoderStatus       (BYTE_   b_BoardHandle,
-						 BYTE_   b_ModulNbr,
-						 BYTE_   b_PulseEncoderNbr,
+/*_INT_   i_APCI1710_ReadPulseEncoderStatus       (unsigned char_   b_BoardHandle,
+						 unsigned char_   b_ModulNbr,
+						 unsigned char_   b_PulseEncoderNbr,
 
-   						 PBYTE_ pb_Status)
+						 unsigned char *_ pb_Status)
 						 */
-INT i_APCI1710_InsnBitsReadWritePulseEncoder(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnBitsReadWritePulseEncoder(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_StatusRegister;
-	BYTE b_ModulNbr;
-	BYTE b_PulseEncoderNbr;
-	PBYTE pb_Status;
-	BYTE b_Type;
-	PULONG pul_ReadValue;
-	ULONG ul_WriteValue;
+	int i_ReturnValue = 0;
+	unsigned int dw_StatusRegister;
+	unsigned char b_ModulNbr;
+	unsigned char b_PulseEncoderNbr;
+	unsigned char *pb_Status;
+	unsigned char b_Type;
+	unsigned int *pul_ReadValue;
+	unsigned int ul_WriteValue;
 
 	i_ReturnValue = insn->n;
-	b_ModulNbr = (BYTE) CR_AREF(insn->chanspec);
-	b_Type = (BYTE) data[0];
-	b_PulseEncoderNbr = (BYTE) data[1];
-	pb_Status = (PBYTE) & data[0];
-	pul_ReadValue = (PULONG) & data[1];
+	b_ModulNbr = (unsigned char) CR_AREF(insn->chanspec);
+	b_Type = (unsigned char) data[0];
+	b_PulseEncoderNbr = (unsigned char) data[1];
+	pb_Status = (unsigned char *) &data[0];
+	pul_ReadValue = (unsigned int *) &data[1];
 
 	/***********************************/
 	/* Test the selected module number */
@@ -766,7 +766,7 @@ INT i_APCI1710_InsnBitsReadWritePulseEncoder(struct comedi_device * dev,
 						dw_StatusRegister;
 
 					*pb_Status =
-						(BYTE) (devpriv->
+						(unsigned char) (devpriv->
 						s_ModuleInfo[b_ModulNbr].
 						s_PulseEncoderModuleInfo.
 						dw_StatusRegister >> (1 +
@@ -794,7 +794,7 @@ INT i_APCI1710_InsnBitsReadWritePulseEncoder(struct comedi_device * dev,
 					break;
 
 				case APCI1710_PULSEENCODER_WRITE:
-					ul_WriteValue = (ULONG) data[2];
+					ul_WriteValue = (unsigned int) data[2];
 			/*******************/
 					/* Write the value */
 			/*******************/
@@ -805,7 +805,7 @@ INT i_APCI1710_InsnBitsReadWritePulseEncoder(struct comedi_device * dev,
 						(4 * b_PulseEncoderNbr) +
 						(64 * b_ModulNbr));
 
-				}	//end of switch
+				}	/* end of switch */
 			} else {
 		 /*********************************/
 				/* Pulse encoder not initialised */
@@ -831,11 +831,11 @@ INT i_APCI1710_InsnBitsReadWritePulseEncoder(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
-INT i_APCI1710_InsnReadInterruptPulseEncoder(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnReadInterruptPulseEncoder(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 
 	data[0] = devpriv->s_InterruptParameters.
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.h
index 28252873e86..61a21cc9406 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.h
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.h
@@ -21,11 +21,11 @@
 #define APCI1710_PULSEENCODER_READ	0
 #define APCI1710_PULSEENCODER_WRITE	1
 
-INT i_APCI1710_InsnConfigInitPulseEncoder(struct comedi_device *dev,
+int i_APCI1710_InsnConfigInitPulseEncoder(struct comedi_device *dev,
 					  struct comedi_subdevice *s,
 					  struct comedi_insn *insn, unsigned int *data);
 
-INT i_APCI1710_InsnWriteEnableDisablePulseEncoder(struct comedi_device *dev,
+int i_APCI1710_InsnWriteEnableDisablePulseEncoder(struct comedi_device *dev,
 						  struct comedi_subdevice *s,
 						  struct comedi_insn *insn,
 						  unsigned int *data);
@@ -33,7 +33,7 @@ INT i_APCI1710_InsnWriteEnableDisablePulseEncoder(struct comedi_device *dev,
 /*
  * READ PULSE ENCODER FUNCTIONS
  */
-INT i_APCI1710_InsnReadInterruptPulseEncoder(struct comedi_device *dev,
+int i_APCI1710_InsnReadInterruptPulseEncoder(struct comedi_device *dev,
 					     struct comedi_subdevice *s,
 					     struct comedi_insn *insn,
 					     unsigned int *data);
@@ -41,7 +41,7 @@ INT i_APCI1710_InsnReadInterruptPulseEncoder(struct comedi_device *dev,
 /*
  * WRITE PULSE ENCODER FUNCTIONS
  */
-INT i_APCI1710_InsnBitsReadWritePulseEncoder(struct comedi_device *dev,
+int i_APCI1710_InsnBitsReadWritePulseEncoder(struct comedi_device *dev,
 					     struct comedi_subdevice *s,
 					     struct comedi_insn *insn,
 					     unsigned int *data);
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.c
index 5ddd092a656..138a84f572c 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.c
@@ -3,13 +3,13 @@
 
 Copyright (C) 2004,2005  ADDI-DATA GmbH for the source code of this module.
 
-        ADDI-DATA GmbH
-        Dieselstrasse 3
-        D-77833 Ottersweier
-        Tel: +19(0)7223/9493-0
-        Fax: +49(0)7223/9493-92
-        http://www.addi-data-com
-        info@addi-data.com
+	ADDI-DATA GmbH
+	Dieselstrasse 3
+	D-77833 Ottersweier
+	Tel: +19(0)7223/9493-0
+	Fax: +49(0)7223/9493-92
+	http://www.addi-data-com
+	info@addi-data.com
 
 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
 
@@ -70,38 +70,38 @@ struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data)
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InsnConfigPWM(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnConfigPWM(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	BYTE b_ConfigType;
-	INT i_ReturnValue = 0;
+	unsigned char b_ConfigType;
+	int i_ReturnValue = 0;
 	b_ConfigType = CR_CHAN(insn->chanspec);
 
 	switch (b_ConfigType) {
 	case APCI1710_PWM_INIT:
-		i_ReturnValue = i_APCI1710_InitPWM(dev, (BYTE) CR_AREF(insn->chanspec),	//  b_ModulNbr
-			(BYTE) data[0],	//b_PWM
-			(BYTE) data[1],	// b_ClockSelection
-			(BYTE) data[2],	// b_TimingUnit
-			(ULONG) data[3],	//ul_LowTiming
-			(ULONG) data[4],	//ul_HighTiming
-			(PULONG) & data[0],	//pul_RealLowTiming
-			(PULONG) & data[1]	//pul_RealHighTiming
+		i_ReturnValue = i_APCI1710_InitPWM(dev, (unsigned char) CR_AREF(insn->chanspec),	/*   b_ModulNbr */
+			(unsigned char) data[0],	/* b_PWM */
+			(unsigned char) data[1],	/*  b_ClockSelection */
+			(unsigned char) data[2],	/*  b_TimingUnit */
+			(unsigned int) data[3],	/* ul_LowTiming */
+			(unsigned int) data[4],	/* ul_HighTiming */
+			(unsigned int *) &data[0],	/* pul_RealLowTiming */
+			(unsigned int *) &data[1]	/* pul_RealHighTiming */
 			);
 		break;
 
 	case APCI1710_PWM_GETINITDATA:
-		i_ReturnValue = i_APCI1710_GetPWMInitialisation(dev, (BYTE) CR_AREF(insn->chanspec),	// b_ModulNbr
-			(BYTE) data[0],	//b_PWM
-			(PBYTE) & data[0],	//pb_TimingUnit
-			(PULONG) & data[1],	//pul_LowTiming
-			(PULONG) & data[2],	//pul_HighTiming
-			(PBYTE) & data[3],	// pb_StartLevel
-			(PBYTE) & data[4],	// pb_StopMode
-			(PBYTE) & data[5],	// pb_StopLevel
-			(PBYTE) & data[6],	// pb_ExternGate
-			(PBYTE) & data[7],	// pb_InterruptEnable
-			(PBYTE) & data[8]	// pb_Enable
+		i_ReturnValue = i_APCI1710_GetPWMInitialisation(dev, (unsigned char) CR_AREF(insn->chanspec),	/*  b_ModulNbr */
+			(unsigned char) data[0],	/* b_PWM */
+			(unsigned char *) &data[0],	/* pb_TimingUnit */
+			(unsigned int *) &data[1],	/* pul_LowTiming */
+			(unsigned int *) &data[2],	/* pul_HighTiming */
+			(unsigned char *) &data[3],	/*  pb_StartLevel */
+			(unsigned char *) &data[4],	/*  pb_StopMode */
+			(unsigned char *) &data[5],	/*  pb_StopLevel */
+			(unsigned char *) &data[6],	/*  pb_ExternGate */
+			(unsigned char *) &data[7],	/*  pb_InterruptEnable */
+			(unsigned char *) &data[8]	/*  pb_Enable */
 			);
 		break;
 
@@ -111,17 +111,17 @@ INT i_APCI1710_InsnConfigPWM(struct comedi_device * dev, struct comedi_subdevice
 
 	if (i_ReturnValue >= 0)
 		i_ReturnValue = insn->n;
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_InitPWM                               |
-|                                       (BYTE_     b_BoardHandle,            |
-|                                        BYTE_     b_ModulNbr,               |
-|                                        BYTE_     b_PWM,                    |
-|                                        BYTE_     b_ClockSelection,         |
-|                                        BYTE_     b_TimingUnit,             |
+|                                       (unsigned char_     b_BoardHandle,            |
+|                                        unsigned char_     b_ModulNbr,               |
+|                                        unsigned char_     b_PWM,                    |
+|                                        unsigned char_     b_ClockSelection,         |
+|                                        unsigned char_     b_TimingUnit,             |
 |                                        ULONG_   ul_LowTiming,              |
 |                                        ULONG_   ul_HighTiming,             |
 |                                        PULONG_ pul_RealLowTiming,          |
@@ -135,11 +135,11 @@ INT i_APCI1710_InsnConfigPWM(struct comedi_device * dev, struct comedi_subdevice
 |                     You must calling this function be for you call any     |
 |                     other function witch access of the PWM.                |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_     b_BoardHandle    : Handle of board APCI-1710 |
-|                     BYTE_     b_ModulNbr       : Module number to configure|
+| Input Parameters  : unsigned char_     b_BoardHandle    : Handle of board APCI-1710 |
+|                     unsigned char_     b_ModulNbr       : Module number to configure|
 |                                                  (0 to 3)                  |
-|                     BYTE_     b_PWM            : Selected PWM (0 or 1).    |
-|                     BYTE_     b_ClockSelection : Selection from PCI bus    |
+|                     unsigned char_     b_PWM            : Selected PWM (0 or 1).    |
+|                     unsigned char_     b_ClockSelection : Selection from PCI bus    |
 |                                                  clock                     |
 |                                                   - APCI1710_30MHZ :       |
 |                                                     The PC have a 30 MHz   |
@@ -151,7 +151,7 @@ INT i_APCI1710_InsnConfigPWM(struct comedi_device * dev, struct comedi_subdevice
 |                                                     The APCI-1710 have a   |
 |                                                     integrated 40Mhz       |
 |                                                     quartz.                |
-|                     BYTE_     b_TimingUnit     : Base timing Unit (0 to 4) |
+|                     unsigned char_     b_TimingUnit     : Base timing Unit (0 to 4) |
 |                                                       0 : ns               |
 |                                                       1 : æs               |
 |                                                       2 : ms               |
@@ -179,19 +179,19 @@ INT i_APCI1710_InsnConfigPWM(struct comedi_device * dev, struct comedi_subdevice
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InitPWM(struct comedi_device * dev,
-	BYTE b_ModulNbr,
-	BYTE b_PWM,
-	BYTE b_ClockSelection,
-	BYTE b_TimingUnit,
-	ULONG ul_LowTiming,
-	ULONG ul_HighTiming,
-	PULONG pul_RealLowTiming, PULONG pul_RealHighTiming)
+int i_APCI1710_InitPWM(struct comedi_device *dev,
+	unsigned char b_ModulNbr,
+	unsigned char b_PWM,
+	unsigned char b_ClockSelection,
+	unsigned char b_TimingUnit,
+	unsigned int ul_LowTiming,
+	unsigned int ul_HighTiming,
+	unsigned int *pul_RealLowTiming, unsigned int *pul_RealHighTiming)
 {
-	INT i_ReturnValue = 0;
-	ULONG ul_LowTimerValue = 0;
-	ULONG ul_HighTimerValue = 0;
-	DWORD dw_Command;
+	int i_ReturnValue = 0;
+	unsigned int ul_LowTimerValue = 0;
+	unsigned int ul_HighTimerValue = 0;
+	unsigned int dw_Command;
 	double d_RealLowTiming = 0;
 	double d_RealHighTiming = 0;
 
@@ -200,33 +200,33 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 	/**************************/
 
 	if (b_ModulNbr < 4) {
-	   /***************/
+		/***************/
 		/* Test if PWM */
-	   /***************/
+		/***************/
 
 		if ((devpriv->s_BoardInfos.
 				dw_MolduleConfiguration[b_ModulNbr] &
 				0xFFFF0000UL) == APCI1710_PWM) {
-	      /**************************/
+			/**************************/
 			/* Test the PWM selection */
-	      /**************************/
+			/**************************/
 
 			if (b_PWM <= 1) {
-		 /******************/
+				/******************/
 				/* Test the clock */
-		 /******************/
+				/******************/
 
 				if ((b_ClockSelection == APCI1710_30MHZ) ||
 					(b_ClockSelection == APCI1710_33MHZ) ||
 					(b_ClockSelection == APCI1710_40MHZ)) {
-		    /************************/
+					/************************/
 					/* Test the timing unit */
-		    /************************/
+					/************************/
 
 					if (b_TimingUnit <= 4) {
-		       /*********************************/
+						/*********************************/
 						/* Test the low timing selection */
-		       /*********************************/
+						/*********************************/
 
 						if (((b_ClockSelection ==
 									APCI1710_30MHZ)
@@ -361,45 +361,45 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 								&& (ul_LowTiming
 									<=
 									7UL))) {
-			  /**********************************/
+							/**********************************/
 							/* Test the High timing selection */
-			  /**********************************/
+							/**********************************/
 
 							if (((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 0) && (ul_HighTiming >= 266) && (ul_HighTiming <= 0xFFFFFFFFUL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 1) && (ul_HighTiming >= 1) && (ul_HighTiming <= 571230650UL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 2) && (ul_HighTiming >= 1) && (ul_HighTiming <= 571230UL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 3) && (ul_HighTiming >= 1) && (ul_HighTiming <= 571UL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 4) && (ul_HighTiming >= 1) && (ul_HighTiming <= 9UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 0) && (ul_HighTiming >= 242) && (ul_HighTiming <= 0xFFFFFFFFUL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 1) && (ul_HighTiming >= 1) && (ul_HighTiming <= 519691043UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 2) && (ul_HighTiming >= 1) && (ul_HighTiming <= 519691UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 3) && (ul_HighTiming >= 1) && (ul_HighTiming <= 520UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 4) && (ul_HighTiming >= 1) && (ul_HighTiming <= 8UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 0) && (ul_HighTiming >= 200) && (ul_HighTiming <= 0xFFFFFFFFUL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 1) && (ul_HighTiming >= 1) && (ul_HighTiming <= 429496729UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 2) && (ul_HighTiming >= 1) && (ul_HighTiming <= 429496UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 3) && (ul_HighTiming >= 1) && (ul_HighTiming <= 429UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 4) && (ul_HighTiming >= 1) && (ul_HighTiming <= 7UL))) {
-			     /**************************/
+								/**************************/
 								/* Test the board version */
-			     /**************************/
+								/**************************/
 
 								if (((b_ClockSelection == APCI1710_40MHZ) && (devpriv->s_BoardInfos.b_BoardVersion > 0)) || (b_ClockSelection != APCI1710_40MHZ)) {
 
-				/************************************/
+									/************************************/
 									/* Calculate the low division fator */
-				/************************************/
+									/************************************/
 
 									fpu_begin
 										();
 
 									switch (b_TimingUnit) {
-				   /******/
+										/******/
 										/* ns */
-				   /******/
+										/******/
 
 									case 0:
 
-					   /******************/
+										/******************/
 										/* Timer 0 factor */
-					   /******************/
+										/******************/
 
 										ul_LowTimerValue
 											=
-											(ULONG)
+											(unsigned int)
 											(ul_LowTiming
 											*
 											(0.00025 * b_ClockSelection));
 
-					   /*******************/
+										/*******************/
 										/* Round the value */
-					   /*******************/
+										/*******************/
 
 										if ((double)((double)ul_LowTiming * (0.00025 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) {
 											ul_LowTimerValue
@@ -409,13 +409,13 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 												1;
 										}
 
-					   /*****************************/
+										/*****************************/
 										/* Calculate the real timing */
-					   /*****************************/
+										/*****************************/
 
 										*pul_RealLowTiming
 											=
-											(ULONG)
+											(unsigned int)
 											(ul_LowTimerValue
 											/
 											(0.00025 * (double)b_ClockSelection));
@@ -451,7 +451,7 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 										if (b_ClockSelection != APCI1710_40MHZ) {
 											ul_LowTimerValue
 												=
-												(ULONG)
+												(unsigned int)
 												(
 												(double)
 												(ul_LowTimerValue)
@@ -461,26 +461,26 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 
 										break;
 
-				   /******/
+										/******/
 										/* æs */
-				   /******/
+										/******/
 
 									case 1:
 
-					   /******************/
+										/******************/
 										/* Timer 0 factor */
-					   /******************/
+										/******************/
 
 										ul_LowTimerValue
 											=
-											(ULONG)
+											(unsigned int)
 											(ul_LowTiming
 											*
 											(0.25 * b_ClockSelection));
 
-					   /*******************/
+										/*******************/
 										/* Round the value */
-					   /*******************/
+										/*******************/
 
 										if ((double)((double)ul_LowTiming * (0.25 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) {
 											ul_LowTimerValue
@@ -490,13 +490,13 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 												1;
 										}
 
-					   /*****************************/
+										/*****************************/
 										/* Calculate the real timing */
-					   /*****************************/
+										/*****************************/
 
 										*pul_RealLowTiming
 											=
-											(ULONG)
+											(unsigned int)
 											(ul_LowTimerValue
 											/
 											(0.25 * (double)b_ClockSelection));
@@ -534,7 +534,7 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 										if (b_ClockSelection != APCI1710_40MHZ) {
 											ul_LowTimerValue
 												=
-												(ULONG)
+												(unsigned int)
 												(
 												(double)
 												(ul_LowTimerValue)
@@ -544,15 +544,15 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 
 										break;
 
-				   /******/
+										/******/
 										/* ms */
-				   /******/
+										/******/
 
 									case 2:
 
-					   /******************/
+										/******************/
 										/* Timer 0 factor */
-					   /******************/
+										/******************/
 
 										ul_LowTimerValue
 											=
@@ -562,9 +562,9 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 											*
 											b_ClockSelection);
 
-					   /*******************/
+										/*******************/
 										/* Round the value */
-					   /*******************/
+										/*******************/
 
 										if ((double)((double)ul_LowTiming * (250.0 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) {
 											ul_LowTimerValue
@@ -574,13 +574,13 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 												1;
 										}
 
-					   /*****************************/
+										/*****************************/
 										/* Calculate the real timing */
-					   /*****************************/
+										/*****************************/
 
 										*pul_RealLowTiming
 											=
-											(ULONG)
+											(unsigned int)
 											(ul_LowTimerValue
 											/
 											(250.0 * (double)b_ClockSelection));
@@ -616,7 +616,7 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 										if (b_ClockSelection != APCI1710_40MHZ) {
 											ul_LowTimerValue
 												=
-												(ULONG)
+												(unsigned int)
 												(
 												(double)
 												(ul_LowTimerValue)
@@ -626,27 +626,27 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 
 										break;
 
-				   /*****/
+										/*****/
 										/* s */
-				   /*****/
+										/*****/
 
 									case 3:
-					   /******************/
+										/******************/
 										/* Timer 0 factor */
-					   /******************/
+										/******************/
 
 										ul_LowTimerValue
 											=
-											(ULONG)
+											(unsigned int)
 											(ul_LowTiming
 											*
 											(250000.0
 												*
 												b_ClockSelection));
 
-					   /*******************/
+										/*******************/
 										/* Round the value */
-					   /*******************/
+										/*******************/
 
 										if ((double)((double)ul_LowTiming * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) {
 											ul_LowTimerValue
@@ -656,13 +656,13 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 												1;
 										}
 
-					   /*****************************/
+										/*****************************/
 										/* Calculate the real timing */
-					   /*****************************/
+										/*****************************/
 
 										*pul_RealLowTiming
 											=
-											(ULONG)
+											(unsigned int)
 											(ul_LowTimerValue
 											/
 											(250000.0
@@ -701,7 +701,7 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 										if (b_ClockSelection != APCI1710_40MHZ) {
 											ul_LowTimerValue
 												=
-												(ULONG)
+												(unsigned int)
 												(
 												(double)
 												(ul_LowTimerValue)
@@ -711,19 +711,19 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 
 										break;
 
-				   /******/
+										/******/
 										/* mn */
-				   /******/
+										/******/
 
 									case 4:
 
-					   /******************/
+										/******************/
 										/* Timer 0 factor */
-					   /******************/
+										/******************/
 
 										ul_LowTimerValue
 											=
-											(ULONG)
+											(unsigned int)
 											(
 											(ul_LowTiming
 												*
@@ -733,9 +733,9 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 												*
 												b_ClockSelection));
 
-					   /*******************/
+										/*******************/
 										/* Round the value */
-					   /*******************/
+										/*******************/
 
 										if ((double)((double)(ul_LowTiming * 60.0) * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) {
 											ul_LowTimerValue
@@ -745,13 +745,13 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 												1;
 										}
 
-					   /*****************************/
+										/*****************************/
 										/* Calculate the real timing */
-					   /*****************************/
+										/*****************************/
 
 										*pul_RealLowTiming
 											=
-											(ULONG)
+											(unsigned int)
 											(ul_LowTimerValue
 											/
 											(250000.0
@@ -795,7 +795,7 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 										if (b_ClockSelection != APCI1710_40MHZ) {
 											ul_LowTimerValue
 												=
-												(ULONG)
+												(unsigned int)
 												(
 												(double)
 												(ul_LowTimerValue)
@@ -806,31 +806,31 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 										break;
 									}
 
-				/*************************************/
+									/*************************************/
 									/* Calculate the high division fator */
-				/*************************************/
+									/*************************************/
 
 									switch (b_TimingUnit) {
-				   /******/
+										/******/
 										/* ns */
-				   /******/
+										/******/
 
 									case 0:
 
-					   /******************/
+										/******************/
 										/* Timer 0 factor */
-					   /******************/
+										/******************/
 
 										ul_HighTimerValue
 											=
-											(ULONG)
+											(unsigned int)
 											(ul_HighTiming
 											*
 											(0.00025 * b_ClockSelection));
 
-					   /*******************/
+										/*******************/
 										/* Round the value */
-					   /*******************/
+										/*******************/
 
 										if ((double)((double)ul_HighTiming * (0.00025 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) {
 											ul_HighTimerValue
@@ -840,13 +840,13 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 												1;
 										}
 
-					   /*****************************/
+										/*****************************/
 										/* Calculate the real timing */
-					   /*****************************/
+										/*****************************/
 
 										*pul_RealHighTiming
 											=
-											(ULONG)
+											(unsigned int)
 											(ul_HighTimerValue
 											/
 											(0.00025 * (double)b_ClockSelection));
@@ -882,7 +882,7 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 										if (b_ClockSelection != APCI1710_40MHZ) {
 											ul_HighTimerValue
 												=
-												(ULONG)
+												(unsigned int)
 												(
 												(double)
 												(ul_HighTimerValue)
@@ -892,26 +892,26 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 
 										break;
 
-				   /******/
+										/******/
 										/* æs */
-				   /******/
+										/******/
 
 									case 1:
 
-					   /******************/
+										/******************/
 										/* Timer 0 factor */
-					   /******************/
+										/******************/
 
 										ul_HighTimerValue
 											=
-											(ULONG)
+											(unsigned int)
 											(ul_HighTiming
 											*
 											(0.25 * b_ClockSelection));
 
-					   /*******************/
+										/*******************/
 										/* Round the value */
-					   /*******************/
+										/*******************/
 
 										if ((double)((double)ul_HighTiming * (0.25 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) {
 											ul_HighTimerValue
@@ -921,13 +921,13 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 												1;
 										}
 
-					   /*****************************/
+										/*****************************/
 										/* Calculate the real timing */
-					   /*****************************/
+										/*****************************/
 
 										*pul_RealHighTiming
 											=
-											(ULONG)
+											(unsigned int)
 											(ul_HighTimerValue
 											/
 											(0.25 * (double)b_ClockSelection));
@@ -965,7 +965,7 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 										if (b_ClockSelection != APCI1710_40MHZ) {
 											ul_HighTimerValue
 												=
-												(ULONG)
+												(unsigned int)
 												(
 												(double)
 												(ul_HighTimerValue)
@@ -975,15 +975,15 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 
 										break;
 
-				   /******/
+										/******/
 										/* ms */
-				   /******/
+										/******/
 
 									case 2:
 
-					   /******************/
+										/******************/
 										/* Timer 0 factor */
-					   /******************/
+										/******************/
 
 										ul_HighTimerValue
 											=
@@ -993,9 +993,9 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 											*
 											b_ClockSelection);
 
-					   /*******************/
+										/*******************/
 										/* Round the value */
-					   /*******************/
+										/*******************/
 
 										if ((double)((double)ul_HighTiming * (250.0 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) {
 											ul_HighTimerValue
@@ -1005,13 +1005,13 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 												1;
 										}
 
-					   /*****************************/
+										/*****************************/
 										/* Calculate the real timing */
-					   /*****************************/
+										/*****************************/
 
 										*pul_RealHighTiming
 											=
-											(ULONG)
+											(unsigned int)
 											(ul_HighTimerValue
 											/
 											(250.0 * (double)b_ClockSelection));
@@ -1047,7 +1047,7 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 										if (b_ClockSelection != APCI1710_40MHZ) {
 											ul_HighTimerValue
 												=
-												(ULONG)
+												(unsigned int)
 												(
 												(double)
 												(ul_HighTimerValue)
@@ -1057,28 +1057,28 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 
 										break;
 
-				   /*****/
+										/*****/
 										/* s */
-				   /*****/
+										/*****/
 
 									case 3:
 
-					   /******************/
+										/******************/
 										/* Timer 0 factor */
-					   /******************/
+										/******************/
 
 										ul_HighTimerValue
 											=
-											(ULONG)
+											(unsigned int)
 											(ul_HighTiming
 											*
 											(250000.0
 												*
 												b_ClockSelection));
 
-					   /*******************/
+										/*******************/
 										/* Round the value */
-					   /*******************/
+										/*******************/
 
 										if ((double)((double)ul_HighTiming * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) {
 											ul_HighTimerValue
@@ -1088,13 +1088,13 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 												1;
 										}
 
-					   /*****************************/
+										/*****************************/
 										/* Calculate the real timing */
-					   /*****************************/
+										/*****************************/
 
 										*pul_RealHighTiming
 											=
-											(ULONG)
+											(unsigned int)
 											(ul_HighTimerValue
 											/
 											(250000.0
@@ -1133,7 +1133,7 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 										if (b_ClockSelection != APCI1710_40MHZ) {
 											ul_HighTimerValue
 												=
-												(ULONG)
+												(unsigned int)
 												(
 												(double)
 												(ul_HighTimerValue)
@@ -1143,19 +1143,19 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 
 										break;
 
-				   /******/
+										/******/
 										/* mn */
-				   /******/
+										/******/
 
 									case 4:
 
-					   /******************/
+										/******************/
 										/* Timer 0 factor */
-					   /******************/
+										/******************/
 
 										ul_HighTimerValue
 											=
-											(ULONG)
+											(unsigned int)
 											(
 											(ul_HighTiming
 												*
@@ -1165,9 +1165,9 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 												*
 												b_ClockSelection));
 
-					   /*******************/
+										/*******************/
 										/* Round the value */
-					   /*******************/
+										/*******************/
 
 										if ((double)((double)(ul_HighTiming * 60.0) * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) {
 											ul_HighTimerValue
@@ -1177,13 +1177,13 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 												1;
 										}
 
-					   /*****************************/
+										/*****************************/
 										/* Calculate the real timing */
-					   /*****************************/
+										/*****************************/
 
 										*pul_RealHighTiming
 											=
-											(ULONG)
+											(unsigned int)
 											(ul_HighTimerValue
 											/
 											(250000.0
@@ -1227,7 +1227,7 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 										if (b_ClockSelection != APCI1710_40MHZ) {
 											ul_HighTimerValue
 												=
-												(ULONG)
+												(unsigned int)
 												(
 												(double)
 												(ul_HighTimerValue)
@@ -1239,9 +1239,9 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 									}
 
 									fpu_end();
-				/****************************/
+									/****************************/
 									/* Save the clock selection */
-				/****************************/
+									/****************************/
 
 									devpriv->
 										s_ModuleInfo
@@ -1251,9 +1251,9 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 										=
 										b_ClockSelection;
 
-				/************************/
+									/************************/
 									/* Save the timing unit */
-				/************************/
+									/************************/
 
 									devpriv->
 										s_ModuleInfo
@@ -1265,9 +1265,9 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 										=
 										b_TimingUnit;
 
-				/****************************/
+									/****************************/
 									/* Save the low base timing */
-				/****************************/
+									/****************************/
 
 									devpriv->
 										s_ModuleInfo
@@ -1289,9 +1289,9 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 										=
 										*pul_RealLowTiming;
 
-				/****************************/
+									/****************************/
 									/* Save the high base timing */
-				/****************************/
+									/****************************/
 
 									devpriv->
 										s_ModuleInfo
@@ -1313,21 +1313,21 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 										=
 										*pul_RealHighTiming;
 
-				/************************/
+									/************************/
 									/* Write the low timing */
-				/************************/
+									/************************/
 
 									outl(ul_LowTimerValue, devpriv->s_BoardInfos.ui_Address + 0 + (20 * b_PWM) + (64 * b_ModulNbr));
 
-				/*************************/
+									/*************************/
 									/* Write the high timing */
-				/*************************/
+									/*************************/
 
 									outl(ul_HighTimerValue, devpriv->s_BoardInfos.ui_Address + 4 + (20 * b_PWM) + (64 * b_ModulNbr));
 
-				/***************************/
+									/***************************/
 									/* Set the clock selection */
-				/***************************/
+									/***************************/
 
 									dw_Command
 										=
@@ -1354,15 +1354,15 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 											0x80;
 									}
 
-				/***************************/
+									/***************************/
 									/* Set the clock selection */
-				/***************************/
+									/***************************/
 
 									outl(dw_Command, devpriv->s_BoardInfos.ui_Address + 8 + (20 * b_PWM) + (64 * b_ModulNbr));
 
-				/*************/
+									/*************/
 									/* PWM init. */
-				/*************/
+									/*************/
 									devpriv->
 										s_ModuleInfo
 										[b_ModulNbr].
@@ -1373,98 +1373,98 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 										=
 										1;
 								} else {
-				/***************************************************/
+									/***************************************************/
 									/* You can not used the 40MHz clock selection with */
 									/* this board                                      */
-				/***************************************************/
+									/***************************************************/
 									DPRINTK("You can not used the 40MHz clock selection with this board\n");
 									i_ReturnValue
 										=
 										-9;
 								}
 							} else {
-			     /***************************************/
+								/***************************************/
 								/* High base timing selection is wrong */
-			     /***************************************/
+								/***************************************/
 								DPRINTK("High base timing selection is wrong\n");
 								i_ReturnValue =
 									-8;
 							}
 						} else {
-			  /**************************************/
+							/**************************************/
 							/* Low base timing selection is wrong */
-			  /**************************************/
+							/**************************************/
 							DPRINTK("Low base timing selection is wrong\n");
 							i_ReturnValue = -7;
 						}
-					}	// if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4))
+					}	/*  if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) */
 					else {
-		       /**********************************/
+						/**********************************/
 						/* Timing unit selection is wrong */
-		       /**********************************/
+						/**********************************/
 						DPRINTK("Timing unit selection is wrong\n");
 						i_ReturnValue = -6;
-					}	// if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4))
-				}	// if ((b_ClockSelection == APCI1710_30MHZ) || (b_ClockSelection == APCI1710_33MHZ) || (b_ClockSelection == APCI1710_40MHZ))
+					}	/*  if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) */
+				}	/*  if ((b_ClockSelection == APCI1710_30MHZ) || (b_ClockSelection == APCI1710_33MHZ) || (b_ClockSelection == APCI1710_40MHZ)) */
 				else {
-		    /*******************************/
+					/*******************************/
 					/* The selected clock is wrong */
-		    /*******************************/
+					/*******************************/
 					DPRINTK("The selected clock is wrong\n");
 					i_ReturnValue = -5;
-				}	// if ((b_ClockSelection == APCI1710_30MHZ) || (b_ClockSelection == APCI1710_33MHZ) || (b_ClockSelection == APCI1710_40MHZ))
-			}	// if (b_PWM >= 0 && b_PWM <= 1)
+				}	/*  if ((b_ClockSelection == APCI1710_30MHZ) || (b_ClockSelection == APCI1710_33MHZ) || (b_ClockSelection == APCI1710_40MHZ)) */
+			}	/*  if (b_PWM >= 0 && b_PWM <= 1) */
 			else {
-		 /******************************/
+				/******************************/
 				/* Tor PWM selection is wrong */
-		 /******************************/
+				/******************************/
 				DPRINTK("Tor PWM selection is wrong\n");
 				i_ReturnValue = -4;
-			}	// if (b_PWM >= 0 && b_PWM <= 1)
+			}	/*  if (b_PWM >= 0 && b_PWM <= 1) */
 		} else {
-	      /**********************************/
+			/**********************************/
 			/* The module is not a PWM module */
-	      /**********************************/
+			/**********************************/
 			DPRINTK("The module is not a PWM module\n");
 			i_ReturnValue = -3;
 		}
 	} else {
-	   /***********************/
+		/***********************/
 		/* Module number error */
-	   /***********************/
+		/***********************/
 		DPRINTK("Module number error\n");
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_GetPWMInitialisation                  |
-|                                       (BYTE_     b_BoardHandle,            |
-|                                        BYTE_     b_ModulNbr,               |
-|                                        BYTE_     b_PWM,                    |
-|                                        PBYTE_   pb_TimingUnit,             |
+|                                       (unsigned char_     b_BoardHandle,            |
+|                                        unsigned char_     b_ModulNbr,               |
+|                                        unsigned char_     b_PWM,                    |
+|                                        unsigned char *_   pb_TimingUnit,             |
 |                                        PULONG_ pul_LowTiming,              |
 |                                        PULONG_ pul_HighTiming,             |
-|                                        PBYTE_   pb_StartLevel,             |
-|                                        PBYTE_   pb_StopMode,               |
-|                                        PBYTE_   pb_StopLevel,              |
-|                                        PBYTE_   pb_ExternGate,             |
-|                                        PBYTE_   pb_InterruptEnable,        |
-|                                        PBYTE_   pb_Enable)                 |
+|                                        unsigned char *_   pb_StartLevel,             |
+|                                        unsigned char *_   pb_StopMode,               |
+|                                        unsigned char *_   pb_StopLevel,              |
+|                                        unsigned char *_   pb_ExternGate,             |
+|                                        unsigned char *_   pb_InterruptEnable,        |
+|                                        unsigned char *_   pb_Enable)                 |
 +----------------------------------------------------------------------------+
 | Task              : Return the PWM (b_PWM) initialisation from selected    |
 |                     module (b_ModulNbr). You must calling the              |
 |                     "i_APCI1710_InitPWM" function be for you call this     |
 |                     function.                                              |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle : Handle of board APCI-1710        |
-|                     BYTE_ b_ModulNbr    : Selected module number (0 to 3)  |
-|                     BYTE_ b_PWM         : Selected PWM (0 or 1)            |
+| Input Parameters  : unsigned char_ b_BoardHandle : Handle of board APCI-1710        |
+|                     unsigned char_ b_ModulNbr    : Selected module number (0 to 3)  |
+|                     unsigned char_ b_PWM         : Selected PWM (0 or 1)            |
 +----------------------------------------------------------------------------+
-| Output Parameters : PBYTE_  pb_TimingUnit      : Base timing Unit (0 to 4) |
+| Output Parameters : unsigned char *_  pb_TimingUnit      : Base timing Unit (0 to 4) |
 |                                                       0 : ns               |
 |                                                       1 : æs               |
 |                                                       2 : ms               |
@@ -1472,13 +1472,13 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 |                                                       4 : mn               |
 |                     PULONG_ pul_LowTiming      : Low base timing value.    |
 |                     PULONG_ pul_HighTiming     : High base timing value.   |
-|                     PBYTE_  pb_StartLevel      : Start period level        |
+|                     unsigned char *_  pb_StartLevel      : Start period level        |
 |                                                  selection                 |
 |                                                       0 : The period start |
 |                                                           with a low level |
 |                                                       1 : The period start |
 |                                                           with a high level|
-|                     PBYTE_  pb_StopMode        : Stop mode selection       |
+|                     unsigned char *_  pb_StopMode        : Stop mode selection       |
 |                                                  0 : The PWM is stopped    |
 |                                                      directly after the    |
 |                                                     "i_APCI1710_DisablePWM"|
@@ -1489,7 +1489,7 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 |                                                      function the PWM is   |
 |                                                      stopped at the end    |
 |                                                      from last period cycle|
-|                     PBYTE_  pb_StopLevel        : Stop PWM level selection |
+|                     unsigned char *_  pb_StopLevel        : Stop PWM level selection |
 |                                                    0 : The output signal   |
 |                                                        keep the level after|
 |                                                        the                 |
@@ -1504,13 +1504,13 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 |                                                        the                 |
 |                                                     "i_APCI1710_DisablePWM"|
 |                                                        function            |
-|                     PBYTE_  pb_ExternGate      : Extern gate action        |
+|                     unsigned char *_  pb_ExternGate      : Extern gate action        |
 |                                                  selection                 |
 |                                                   0 : Extern gate signal   |
 |                                                       not used.            |
 |                                                   1 : Extern gate signal   |
 |                                                       used.                |
-|                     PBYTE_  pb_InterruptEnable : Enable or disable the PWM |
+|                     unsigned char *_  pb_InterruptEnable : Enable or disable the PWM |
 |                                                  interrupt.                |
 |                                                  - APCI1710_ENABLE :       |
 |                                                    Enable the PWM interrupt|
@@ -1519,7 +1519,7 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 |                                                  - APCI1710_DISABLE :      |
 |                                                    Disable the PWM         |
 |                                                    interrupt               |
-|                     PBYTE_  pb_Enable          : Indicate if the PWM is    |
+|                     unsigned char *_  pb_Enable          : Indicate if the PWM is    |
 |                                                  enabled or no             |
 |                                                       0 : PWM not enabled  |
 |                                                       1 : PWM enabled      |
@@ -1534,138 +1534,138 @@ INT i_APCI1710_InitPWM(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_GetPWMInitialisation(struct comedi_device * dev,
-	BYTE b_ModulNbr,
-	BYTE b_PWM,
-	PBYTE pb_TimingUnit,
-	PULONG pul_LowTiming,
-	PULONG pul_HighTiming,
-	PBYTE pb_StartLevel,
-	PBYTE pb_StopMode,
-	PBYTE pb_StopLevel,
-	PBYTE pb_ExternGate, PBYTE pb_InterruptEnable, PBYTE pb_Enable)
+int i_APCI1710_GetPWMInitialisation(struct comedi_device *dev,
+	unsigned char b_ModulNbr,
+	unsigned char b_PWM,
+	unsigned char *pb_TimingUnit,
+	unsigned int *pul_LowTiming,
+	unsigned int *pul_HighTiming,
+	unsigned char *pb_StartLevel,
+	unsigned char *pb_StopMode,
+	unsigned char *pb_StopLevel,
+	unsigned char *pb_ExternGate, unsigned char *pb_InterruptEnable, unsigned char *pb_Enable)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_Status;
-	DWORD dw_Command;
+	int i_ReturnValue = 0;
+	unsigned int dw_Status;
+	unsigned int dw_Command;
 
 	/**************************/
 	/* Test the module number */
 	/**************************/
 
 	if (b_ModulNbr < 4) {
-	   /***************/
+		/***************/
 		/* Test if PWM */
-	   /***************/
+		/***************/
 
 		if ((devpriv->s_BoardInfos.
 				dw_MolduleConfiguration[b_ModulNbr] &
 				0xFFFF0000UL) == APCI1710_PWM) {
-	      /**************************/
+			/**************************/
 			/* Test the PWM selection */
-	      /**************************/
+			/**************************/
 
 			if (b_PWM <= 1) {
-		 /***************************/
+				/***************************/
 				/* Test if PWM initialised */
-		 /***************************/
+				/***************************/
 
 				dw_Status = inl(devpriv->s_BoardInfos.
 					ui_Address + 12 + (20 * b_PWM) +
 					(64 * b_ModulNbr));
 
 				if (dw_Status & 0x10) {
-		    /***********************/
+					/***********************/
 					/* Read the low timing */
-		    /***********************/
+					/***********************/
 
 					*pul_LowTiming =
 						inl(devpriv->s_BoardInfos.
 						ui_Address + 0 + (20 * b_PWM) +
 						(64 * b_ModulNbr));
 
-		    /************************/
+					/************************/
 					/* Read the high timing */
-		    /************************/
+					/************************/
 
 					*pul_HighTiming =
 						inl(devpriv->s_BoardInfos.
 						ui_Address + 4 + (20 * b_PWM) +
 						(64 * b_ModulNbr));
 
-		    /********************/
+					/********************/
 					/* Read the command */
-		    /********************/
+					/********************/
 
 					dw_Command = inl(devpriv->s_BoardInfos.
 						ui_Address + 8 + (20 * b_PWM) +
 						(64 * b_ModulNbr));
 
 					*pb_StartLevel =
-						(BYTE) ((dw_Command >> 5) & 1);
+						(unsigned char) ((dw_Command >> 5) & 1);
 					*pb_StopMode =
-						(BYTE) ((dw_Command >> 0) & 1);
+						(unsigned char) ((dw_Command >> 0) & 1);
 					*pb_StopLevel =
-						(BYTE) ((dw_Command >> 1) & 1);
+						(unsigned char) ((dw_Command >> 1) & 1);
 					*pb_ExternGate =
-						(BYTE) ((dw_Command >> 4) & 1);
+						(unsigned char) ((dw_Command >> 4) & 1);
 					*pb_InterruptEnable =
-						(BYTE) ((dw_Command >> 3) & 1);
+						(unsigned char) ((dw_Command >> 3) & 1);
 
 					if (*pb_StopLevel) {
 						*pb_StopLevel =
 							*pb_StopLevel +
-							(BYTE) ((dw_Command >>
+							(unsigned char) ((dw_Command >>
 								2) & 1);
 					}
 
-		    /********************/
+					/********************/
 					/* Read the command */
-		    /********************/
+					/********************/
 
 					dw_Command = inl(devpriv->s_BoardInfos.
 						ui_Address + 8 + (20 * b_PWM) +
 						(64 * b_ModulNbr));
 
 					*pb_Enable =
-						(BYTE) ((dw_Command >> 0) & 1);
+						(unsigned char) ((dw_Command >> 0) & 1);
 
 					*pb_TimingUnit = devpriv->
 						s_ModuleInfo[b_ModulNbr].
 						s_PWMModuleInfo.
 						s_PWMInfo[b_PWM].b_TimingUnit;
-				}	// if (dw_Status & 0x10)
+				}	/*  if (dw_Status & 0x10) */
 				else {
-		    /***********************/
+					/***********************/
 					/* PWM not initialised */
-		    /***********************/
+					/***********************/
 					DPRINTK("PWM not initialised\n");
 					i_ReturnValue = -5;
-				}	// if (dw_Status & 0x10)
-			}	// if (b_PWM >= 0 && b_PWM <= 1)
+				}	/*  if (dw_Status & 0x10) */
+			}	/*  if (b_PWM >= 0 && b_PWM <= 1) */
 			else {
-		 /******************************/
+				/******************************/
 				/* Tor PWM selection is wrong */
-		 /******************************/
+				/******************************/
 				DPRINTK("Tor PWM selection is wrong\n");
 				i_ReturnValue = -4;
-			}	// if (b_PWM >= 0 && b_PWM <= 1)
+			}	/*  if (b_PWM >= 0 && b_PWM <= 1) */
 		} else {
-	      /**********************************/
+			/**********************************/
 			/* The module is not a PWM module */
-	      /**********************************/
+			/**********************************/
 			DPRINTK("The module is not a PWM module\n");
 			i_ReturnValue = -3;
 		}
 	} else {
-	   /***********************/
+		/***********************/
 		/* Module number error */
-	   /***********************/
+		/***********************/
 		DPRINTK("Module number error\n");
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
@@ -1683,33 +1683,33 @@ struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data)
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InsnWritePWM(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnWritePWM(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	BYTE b_WriteType;
-	INT i_ReturnValue = 0;
+	unsigned char b_WriteType;
+	int i_ReturnValue = 0;
 	b_WriteType = CR_CHAN(insn->chanspec);
 
 	switch (b_WriteType) {
 	case APCI1710_PWM_ENABLE:
 		i_ReturnValue = i_APCI1710_EnablePWM(dev,
-			(BYTE) CR_AREF(insn->chanspec),
-			(BYTE) data[0],
-			(BYTE) data[1],
-			(BYTE) data[2],
-			(BYTE) data[3], (BYTE) data[4], (BYTE) data[5]);
+			(unsigned char) CR_AREF(insn->chanspec),
+			(unsigned char) data[0],
+			(unsigned char) data[1],
+			(unsigned char) data[2],
+			(unsigned char) data[3], (unsigned char) data[4], (unsigned char) data[5]);
 		break;
 
 	case APCI1710_PWM_DISABLE:
 		i_ReturnValue = i_APCI1710_DisablePWM(dev,
-			(BYTE) CR_AREF(insn->chanspec), (BYTE) data[0]);
+			(unsigned char) CR_AREF(insn->chanspec), (unsigned char) data[0]);
 		break;
 
 	case APCI1710_PWM_NEWTIMING:
 		i_ReturnValue = i_APCI1710_SetNewPWMTiming(dev,
-			(BYTE) CR_AREF(insn->chanspec),
-			(BYTE) data[0],
-			(BYTE) data[1], (ULONG) data[2], (ULONG) data[3]);
+			(unsigned char) CR_AREF(insn->chanspec),
+			(unsigned char) data[0],
+			(unsigned char) data[1], (unsigned int) data[2], (unsigned int) data[3]);
 		break;
 
 	default:
@@ -1718,20 +1718,20 @@ INT i_APCI1710_InsnWritePWM(struct comedi_device * dev, struct comedi_subdevice
 
 	if (i_ReturnValue >= 0)
 		i_ReturnValue = insn->n;
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_     i_APCI1710_EnablePWM                         |
-|                                       (BYTE_  b_BoardHandle,               |
-|                                        BYTE_  b_ModulNbr,                  |
-|                                        BYTE_  b_PWM,                       |
-|                                        BYTE_  b_StartLevel,                |
-|                                        BYTE_  b_StopMode,                  |
-|                                        BYTE_  b_StopLevel,                 |
-|                                        BYTE_  b_ExternGate,                |
-|                                        BYTE_  b_InterruptEnable)           |
+|                                       (unsigned char_  b_BoardHandle,               |
+|                                        unsigned char_  b_ModulNbr,                  |
+|                                        unsigned char_  b_PWM,                       |
+|                                        unsigned char_  b_StartLevel,                |
+|                                        unsigned char_  b_StopMode,                  |
+|                                        unsigned char_  b_StopLevel,                 |
+|                                        unsigned char_  b_ExternGate,                |
+|                                        unsigned char_  b_InterruptEnable)           |
 +----------------------------------------------------------------------------+
 | Task              : Enable the selected PWM (b_PWM) from selected module   |
 |                     (b_ModulNbr). You must calling the "i_APCI1710_InitPWM"|
@@ -1741,16 +1741,16 @@ INT i_APCI1710_InsnWritePWM(struct comedi_device * dev, struct comedi_subdevice
 |                     See function "i_APCI1710_SetBoardIntRoutineX" and the  |
 |                     Interrupt mask description chapter.                    |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle     : Handle of board APCI-1710    |
-|                     BYTE_ b_ModulNbr        : Selected module number       |
+| Input Parameters  : unsigned char_ b_BoardHandle     : Handle of board APCI-1710    |
+|                     unsigned char_ b_ModulNbr        : Selected module number       |
 |                                               (0 to 3)                     |
-|                     BYTE_ b_PWM             : Selected PWM (0 or 1)        |
-|                     BYTE_ b_StartLevel      : Start period level selection |
+|                     unsigned char_ b_PWM             : Selected PWM (0 or 1)        |
+|                     unsigned char_ b_StartLevel      : Start period level selection |
 |                                                0 : The period start with a |
 |                                                    low level               |
 |                                                1 : The period start with a |
 |                                                    high level              |
-|                     BYTE_ b_StopMode        : Stop mode selection          |
+|                     unsigned char_ b_StopMode        : Stop mode selection          |
 |                                                0 : The PWM is stopped      |
 |                                                    directly after the      |
 |                                                    "i_APCI1710_DisablePWM" |
@@ -1761,7 +1761,7 @@ INT i_APCI1710_InsnWritePWM(struct comedi_device * dev, struct comedi_subdevice
 |                                                     function the PWM is    |
 |                                                     stopped at the end from|
 |                                                     last period cycle.     |
-|                     BYTE_ b_StopLevel       : Stop PWM level selection     |
+|                     unsigned char_ b_StopLevel       : Stop PWM level selection     |
 |                                                0 : The output signal keep  |
 |                                                    the level after the     |
 |                                                    "i_APCI1710_DisablePWM" |
@@ -1774,11 +1774,11 @@ INT i_APCI1710_InsnWritePWM(struct comedi_device * dev, struct comedi_subdevice
 |                                                    to high after the       |
 |                                                    "i_APCI1710_DisablePWM" |
 |                                                    function                |
-|                     BYTE_ b_ExternGate      : Extern gate action selection |
+|                     unsigned char_ b_ExternGate      : Extern gate action selection |
 |                                                0 : Extern gate signal not  |
 |                                                    used.                   |
 |                                                1 : Extern gate signal used.|
-|                     BYTE_ b_InterruptEnable : Enable or disable the PWM    |
+|                     unsigned char_ b_InterruptEnable : Enable or disable the PWM    |
 |                                               interrupt.                   |
 |                                               - APCI1710_ENABLE :          |
 |                                                 Enable the PWM interrupt   |
@@ -1806,77 +1806,77 @@ INT i_APCI1710_InsnWritePWM(struct comedi_device * dev, struct comedi_subdevice
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_EnablePWM(struct comedi_device * dev,
-	BYTE b_ModulNbr,
-	BYTE b_PWM,
-	BYTE b_StartLevel,
-	BYTE b_StopMode,
-	BYTE b_StopLevel, BYTE b_ExternGate, BYTE b_InterruptEnable)
+int i_APCI1710_EnablePWM(struct comedi_device *dev,
+	unsigned char b_ModulNbr,
+	unsigned char b_PWM,
+	unsigned char b_StartLevel,
+	unsigned char b_StopMode,
+	unsigned char b_StopLevel, unsigned char b_ExternGate, unsigned char b_InterruptEnable)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_Status;
-	DWORD dw_Command;
+	int i_ReturnValue = 0;
+	unsigned int dw_Status;
+	unsigned int dw_Command;
 
-	devpriv->tsk_Current = current;	// Save the current process task structure
+	devpriv->tsk_Current = current;	/*  Save the current process task structure */
 	/**************************/
 	/* Test the module number */
 	/**************************/
 
 	if (b_ModulNbr < 4) {
-	   /***************/
+		/***************/
 		/* Test if PWM */
-	   /***************/
+		/***************/
 
 		if ((devpriv->s_BoardInfos.
 				dw_MolduleConfiguration[b_ModulNbr] &
 				0xFFFF0000UL) == APCI1710_PWM) {
-	      /**************************/
+			/**************************/
 			/* Test the PWM selection */
-	      /**************************/
+			/**************************/
 
 			if (b_PWM <= 1) {
-		 /***************************/
+				/***************************/
 				/* Test if PWM initialised */
-		 /***************************/
+				/***************************/
 
 				dw_Status = inl(devpriv->s_BoardInfos.
 					ui_Address + 12 + (20 * b_PWM) +
 					(64 * b_ModulNbr));
 
 				if (dw_Status & 0x10) {
-		    /**********************************/
+					/**********************************/
 					/* Test the start level selection */
-		    /**********************************/
+					/**********************************/
 
 					if (b_StartLevel <= 1) {
-		       /**********************/
+						/**********************/
 						/* Test the stop mode */
-		       /**********************/
+						/**********************/
 
 						if (b_StopMode <= 1) {
-			  /***********************/
+							/***********************/
 							/* Test the stop level */
-			  /***********************/
+							/***********************/
 
 							if (b_StopLevel <= 2) {
-			     /*****************************/
+								/*****************************/
 								/* Test the extern gate mode */
-			     /*****************************/
+								/*****************************/
 
 								if (b_ExternGate
 									<= 1) {
-				/*****************************/
+									/*****************************/
 									/* Test the interrupt action */
-				/*****************************/
+									/*****************************/
 
 									if (b_InterruptEnable == APCI1710_ENABLE || b_InterruptEnable == APCI1710_DISABLE) {
-				   /******************************************/
+										/******************************************/
 										/* Test if interrupt function initialised */
-				   /******************************************/
+										/******************************************/
 
-				      /********************/
+										/********************/
 										/* Read the command */
-				      /********************/
+										/********************/
 
 										dw_Command
 											=
@@ -1895,9 +1895,9 @@ INT i_APCI1710_EnablePWM(struct comedi_device * dev,
 											&
 											0x80;
 
-				      /********************/
+										/********************/
 										/* Make the command */
-				      /********************/
+										/********************/
 
 										dw_Command
 											=
@@ -1943,100 +1943,100 @@ INT i_APCI1710_EnablePWM(struct comedi_device * dev,
 											=
 											b_InterruptEnable;
 
-				      /*******************/
+										/*******************/
 										/* Set the command */
-				      /*******************/
+										/*******************/
 
 										outl(dw_Command, devpriv->s_BoardInfos.ui_Address + 8 + (20 * b_PWM) + (64 * b_ModulNbr));
 
-				      /******************/
+										/******************/
 										/* Enable the PWM */
-				      /******************/
+										/******************/
 										outl(1, devpriv->s_BoardInfos.ui_Address + 12 + (20 * b_PWM) + (64 * b_ModulNbr));
-									}	// if (b_InterruptEnable == APCI1710_ENABLE || b_InterruptEnable == APCI1710_DISABLE)
+									}	/*  if (b_InterruptEnable == APCI1710_ENABLE || b_InterruptEnable == APCI1710_DISABLE) */
 									else {
-				   /********************************/
+										/********************************/
 										/* Interrupt parameter is wrong */
-				   /********************************/
+										/********************************/
 										DPRINTK("Interrupt parameter is wrong\n");
 										i_ReturnValue
 											=
 											-10;
-									}	// if (b_InterruptEnable == APCI1710_ENABLE || b_InterruptEnable == APCI1710_DISABLE)
-								}	// if (b_ExternGate >= 0 && b_ExternGate <= 1)
+									}	/*  if (b_InterruptEnable == APCI1710_ENABLE || b_InterruptEnable == APCI1710_DISABLE) */
+								}	/*  if (b_ExternGate >= 0 && b_ExternGate <= 1) */
 								else {
-				/*****************************************/
+									/*****************************************/
 									/* Extern gate signal selection is wrong */
-				/*****************************************/
+									/*****************************************/
 									DPRINTK("Extern gate signal selection is wrong\n");
 									i_ReturnValue
 										=
 										-9;
-								}	// if (b_ExternGate >= 0 && b_ExternGate <= 1)
-							}	// if (b_StopLevel >= 0 && b_StopLevel <= 2)
+								}	/*  if (b_ExternGate >= 0 && b_ExternGate <= 1) */
+							}	/*  if (b_StopLevel >= 0 && b_StopLevel <= 2) */
 							else {
-			     /*************************************/
+								/*************************************/
 								/* PWM stop level selection is wrong */
-			     /*************************************/
+								/*************************************/
 								DPRINTK("PWM stop level selection is wrong\n");
 								i_ReturnValue =
 									-8;
-							}	// if (b_StopLevel >= 0 && b_StopLevel <= 2)
-						}	// if (b_StopMode >= 0 && b_StopMode <= 1)
+							}	/*  if (b_StopLevel >= 0 && b_StopLevel <= 2) */
+						}	/*  if (b_StopMode >= 0 && b_StopMode <= 1) */
 						else {
-			  /************************************/
+							/************************************/
 							/* PWM stop mode selection is wrong */
-			  /************************************/
+							/************************************/
 							DPRINTK("PWM stop mode selection is wrong\n");
 							i_ReturnValue = -7;
-						}	// if (b_StopMode >= 0 && b_StopMode <= 1)
-					}	// if (b_StartLevel >= 0 && b_StartLevel <= 1)
+						}	/*  if (b_StopMode >= 0 && b_StopMode <= 1) */
+					}	/*  if (b_StartLevel >= 0 && b_StartLevel <= 1) */
 					else {
-		       /**************************************/
+						/**************************************/
 						/* PWM start level selection is wrong */
-		       /**************************************/
+						/**************************************/
 						DPRINTK("PWM start level selection is wrong\n");
 						i_ReturnValue = -6;
-					}	// if (b_StartLevel >= 0 && b_StartLevel <= 1)
-				}	// if (dw_Status & 0x10)
+					}	/*  if (b_StartLevel >= 0 && b_StartLevel <= 1) */
+				}	/*  if (dw_Status & 0x10) */
 				else {
-		    /***********************/
+					/***********************/
 					/* PWM not initialised */
-		    /***********************/
+					/***********************/
 					DPRINTK("PWM not initialised\n");
 					i_ReturnValue = -5;
-				}	// if (dw_Status & 0x10)
-			}	// if (b_PWM >= 0 && b_PWM <= 1)
+				}	/*  if (dw_Status & 0x10) */
+			}	/*  if (b_PWM >= 0 && b_PWM <= 1) */
 			else {
-		 /******************************/
+				/******************************/
 				/* Tor PWM selection is wrong */
-		 /******************************/
+				/******************************/
 				DPRINTK("Tor PWM selection is wrong\n");
 				i_ReturnValue = -4;
-			}	// if (b_PWM >= 0 && b_PWM <= 1)
+			}	/*  if (b_PWM >= 0 && b_PWM <= 1) */
 		} else {
-	      /**********************************/
+			/**********************************/
 			/* The module is not a PWM module */
-	      /**********************************/
+			/**********************************/
 			DPRINTK("The module is not a PWM module\n");
 			i_ReturnValue = -3;
 		}
 	} else {
-	   /***********************/
+		/***********************/
 		/* Module number error */
-	   /***********************/
+		/***********************/
 		DPRINTK("Module number error\n");
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
-| Function Name     : _INT_ i_APCI1710_DisablePWM (BYTE_  b_BoardHandle,     |
-|                                                  BYTE_  b_ModulNbr,        |
-|                                                  BYTE_  b_PWM)             |
+| Function Name     : _INT_ i_APCI1710_DisablePWM (unsigned char_  b_BoardHandle,     |
+|                                                  unsigned char_  b_ModulNbr,        |
+|                                                  unsigned char_  b_PWM)             |
 +----------------------------------------------------------------------------+
 | Task              : Disable the selected PWM (b_PWM) from selected module  |
 |                     (b_ModulNbr). The output signal level depend of the    |
@@ -2045,8 +2045,8 @@ INT i_APCI1710_EnablePWM(struct comedi_device * dev,
 |                     parameters from this function.                         |
 +----------------------------------------------------------------------------+
 | Input Parameters  :BYTE_ b_BoardHandle : Handle of board APCI-1710         |
-|                    BYTE_ b_ModulNbr    : Selected module number (0 to 3)   |
-|                    BYTE_ b_PWM         : Selected PWM (0 or 1)             |
+|                    unsigned char_ b_ModulNbr    : Selected module number (0 to 3)   |
+|                    unsigned char_ b_PWM         : Selected PWM (0 or 1)             |
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
 +----------------------------------------------------------------------------+
@@ -2062,99 +2062,99 @@ INT i_APCI1710_EnablePWM(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_DisablePWM(struct comedi_device * dev, BYTE b_ModulNbr, BYTE b_PWM)
+int i_APCI1710_DisablePWM(struct comedi_device *dev, unsigned char b_ModulNbr, unsigned char b_PWM)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_Status;
+	int i_ReturnValue = 0;
+	unsigned int dw_Status;
 
 	/**************************/
 	/* Test the module number */
 	/**************************/
 
 	if (b_ModulNbr < 4) {
-	   /***************/
+		/***************/
 		/* Test if PWM */
-	   /***************/
+		/***************/
 
 		if ((devpriv->s_BoardInfos.
 				dw_MolduleConfiguration[b_ModulNbr] &
 				0xFFFF0000UL) == APCI1710_PWM) {
-	      /**************************/
+			/**************************/
 			/* Test the PWM selection */
-	      /**************************/
+			/**************************/
 
 			if (b_PWM <= 1) {
-		 /***************************/
+				/***************************/
 				/* Test if PWM initialised */
-		 /***************************/
+				/***************************/
 
 				dw_Status = inl(devpriv->s_BoardInfos.
 					ui_Address + 12 + (20 * b_PWM) +
 					(64 * b_ModulNbr));
 
 				if (dw_Status & 0x10) {
-		    /***********************/
+					/***********************/
 					/* Test if PWM enabled */
-		    /***********************/
+					/***********************/
 
 					if (dw_Status & 0x1) {
-		       /*******************/
+						/*******************/
 						/* Disable the PWM */
-		       /*******************/
+						/*******************/
 						outl(0, devpriv->s_BoardInfos.
 							ui_Address + 12 +
 							(20 * b_PWM) +
 							(64 * b_ModulNbr));
-					}	// if (dw_Status & 0x1)
+					}	/*  if (dw_Status & 0x1) */
 					else {
-		       /*******************/
+						/*******************/
 						/* PWM not enabled */
-		       /*******************/
+						/*******************/
 						DPRINTK("PWM not enabled\n");
 						i_ReturnValue = -6;
-					}	// if (dw_Status & 0x1)
-				}	// if (dw_Status & 0x10)
+					}	/*  if (dw_Status & 0x1) */
+				}	/*  if (dw_Status & 0x10) */
 				else {
-		    /***********************/
+					/***********************/
 					/* PWM not initialised */
-		    /***********************/
+					/***********************/
 					DPRINTK(" PWM not initialised\n");
 					i_ReturnValue = -5;
-				}	// if (dw_Status & 0x10)
-			}	// if (b_PWM >= 0 && b_PWM <= 1)
+				}	/*  if (dw_Status & 0x10) */
+			}	/*  if (b_PWM >= 0 && b_PWM <= 1) */
 			else {
-		 /******************************/
+				/******************************/
 				/* Tor PWM selection is wrong */
-		 /******************************/
+				/******************************/
 				DPRINTK("Tor PWM selection is wrong\n");
 				i_ReturnValue = -4;
-			}	// if (b_PWM >= 0 && b_PWM <= 1)
+			}	/*  if (b_PWM >= 0 && b_PWM <= 1) */
 		} else {
-	      /**********************************/
+			/**********************************/
 			/* The module is not a PWM module */
-	      /**********************************/
+			/**********************************/
 			DPRINTK("The module is not a PWM module\n");
 			i_ReturnValue = -3;
 		}
 	} else {
-	   /***********************/
+		/***********************/
 		/* Module number error */
-	   /***********************/
+		/***********************/
 		DPRINTK("Module number error\n");
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_SetNewPWMTiming                       |
-|                                       (BYTE_     b_BoardHandle,            |
-|                                        BYTE_     b_ModulNbr,               |
-|                                        BYTE_     b_PWM,                    |
-|                                        BYTE_     b_ClockSelection,         |
-|                                        BYTE_     b_TimingUnit,             |
+|                                       (unsigned char_     b_BoardHandle,            |
+|                                        unsigned char_     b_ModulNbr,               |
+|                                        unsigned char_     b_PWM,                    |
+|                                        unsigned char_     b_ClockSelection,         |
+|                                        unsigned char_     b_TimingUnit,             |
 |                                        ULONG_   ul_LowTiming,              |
 |                                        ULONG_   ul_HighTiming)             |
 +----------------------------------------------------------------------------+
@@ -2162,11 +2162,11 @@ INT i_APCI1710_DisablePWM(struct comedi_device * dev, BYTE b_ModulNbr, BYTE b_PW
 |                     ul_TimingUnit determine the low/high timing base for   |
 |                     the period.                                            |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_     b_BoardHandle    : Handle of board APCI-1710 |
-|                     BYTE_     b_ModulNbr       : Module number to configure|
+| Input Parameters  : unsigned char_     b_BoardHandle    : Handle of board APCI-1710 |
+|                     unsigned char_     b_ModulNbr       : Module number to configure|
 |                                                  (0 to 3)                  |
-|                     BYTE_     b_PWM            : Selected PWM (0 or 1).    |
-|                     BYTE_     b_TimingUnit     : Base timing Unit (0 to 4) |
+|                     unsigned char_     b_PWM            : Selected PWM (0 or 1).    |
+|                     unsigned char_     b_TimingUnit     : Base timing Unit (0 to 4) |
 |                                                       0 : ns               |
 |                                                       1 : æs               |
 |                                                       2 : ms               |
@@ -2189,18 +2189,18 @@ INT i_APCI1710_DisablePWM(struct comedi_device * dev, BYTE b_ModulNbr, BYTE b_PW
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
-	BYTE b_ModulNbr,
-	BYTE b_PWM, BYTE b_TimingUnit, ULONG ul_LowTiming, ULONG ul_HighTiming)
+int i_APCI1710_SetNewPWMTiming(struct comedi_device *dev,
+	unsigned char b_ModulNbr,
+	unsigned char b_PWM, unsigned char b_TimingUnit, unsigned int ul_LowTiming, unsigned int ul_HighTiming)
 {
-	BYTE b_ClockSelection;
-	INT i_ReturnValue = 0;
-	ULONG ul_LowTimerValue = 0;
-	ULONG ul_HighTimerValue = 0;
-	ULONG ul_RealLowTiming = 0;
-	ULONG ul_RealHighTiming = 0;
-	DWORD dw_Status;
-	DWORD dw_Command;
+	unsigned char b_ClockSelection;
+	int i_ReturnValue = 0;
+	unsigned int ul_LowTimerValue = 0;
+	unsigned int ul_HighTimerValue = 0;
+	unsigned int ul_RealLowTiming = 0;
+	unsigned int ul_RealHighTiming = 0;
+	unsigned int dw_Status;
+	unsigned int dw_Command;
 	double d_RealLowTiming = 0;
 	double d_RealHighTiming = 0;
 
@@ -2209,21 +2209,21 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 	/**************************/
 
 	if (b_ModulNbr < 4) {
-	   /***************/
+		/***************/
 		/* Test if PWM */
-	   /***************/
+		/***************/
 
 		if ((devpriv->s_BoardInfos.
 				dw_MolduleConfiguration[b_ModulNbr] &
 				0xFFFF0000UL) == APCI1710_PWM) {
-	      /**************************/
+			/**************************/
 			/* Test the PWM selection */
-	      /**************************/
+			/**************************/
 
 			if (b_PWM <= 1) {
-		 /***************************/
+				/***************************/
 				/* Test if PWM initialised */
-		 /***************************/
+				/***************************/
 
 				dw_Status = inl(devpriv->s_BoardInfos.
 					ui_Address + 12 + (20 * b_PWM) +
@@ -2235,14 +2235,14 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 						s_PWMModuleInfo.
 						b_ClockSelection;
 
-		    /************************/
+					/************************/
 					/* Test the timing unit */
-		    /************************/
+					/************************/
 
 					if (b_TimingUnit <= 4) {
-		       /*********************************/
+						/*********************************/
 						/* Test the low timing selection */
-		       /*********************************/
+						/*********************************/
 
 						if (((b_ClockSelection ==
 									APCI1710_30MHZ)
@@ -2377,37 +2377,37 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 								&& (ul_LowTiming
 									<=
 									7UL))) {
-			  /**********************************/
+							/**********************************/
 							/* Test the High timing selection */
-			  /**********************************/
+							/**********************************/
 
 							if (((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 0) && (ul_HighTiming >= 266) && (ul_HighTiming <= 0xFFFFFFFFUL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 1) && (ul_HighTiming >= 1) && (ul_HighTiming <= 571230650UL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 2) && (ul_HighTiming >= 1) && (ul_HighTiming <= 571230UL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 3) && (ul_HighTiming >= 1) && (ul_HighTiming <= 571UL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 4) && (ul_HighTiming >= 1) && (ul_HighTiming <= 9UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 0) && (ul_HighTiming >= 242) && (ul_HighTiming <= 0xFFFFFFFFUL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 1) && (ul_HighTiming >= 1) && (ul_HighTiming <= 519691043UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 2) && (ul_HighTiming >= 1) && (ul_HighTiming <= 519691UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 3) && (ul_HighTiming >= 1) && (ul_HighTiming <= 520UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 4) && (ul_HighTiming >= 1) && (ul_HighTiming <= 8UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 0) && (ul_HighTiming >= 200) && (ul_HighTiming <= 0xFFFFFFFFUL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 1) && (ul_HighTiming >= 1) && (ul_HighTiming <= 429496729UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 2) && (ul_HighTiming >= 1) && (ul_HighTiming <= 429496UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 3) && (ul_HighTiming >= 1) && (ul_HighTiming <= 429UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 4) && (ul_HighTiming >= 1) && (ul_HighTiming <= 7UL))) {
-			     /************************************/
+								/************************************/
 								/* Calculate the low division fator */
-			     /************************************/
+								/************************************/
 
 								fpu_begin();
 								switch (b_TimingUnit) {
-				/******/
+									/******/
 									/* ns */
-				/******/
+									/******/
 
 								case 0:
 
-					/******************/
+									/******************/
 									/* Timer 0 factor */
-					/******************/
+									/******************/
 
 									ul_LowTimerValue
 										=
-										(ULONG)
+										(unsigned int)
 										(ul_LowTiming
 										*
 										(0.00025 * b_ClockSelection));
 
-					/*******************/
+									/*******************/
 									/* Round the value */
-					/*******************/
+									/*******************/
 
 									if ((double)((double)ul_LowTiming * (0.00025 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) {
 										ul_LowTimerValue
@@ -2417,13 +2417,13 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 											1;
 									}
 
-					/*****************************/
+									/*****************************/
 									/* Calculate the real timing */
-					/*****************************/
+									/*****************************/
 
 									ul_RealLowTiming
 										=
-										(ULONG)
+										(unsigned int)
 										(ul_LowTimerValue
 										/
 										(0.00025 * (double)b_ClockSelection));
@@ -2459,7 +2459,7 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 									if (b_ClockSelection != APCI1710_40MHZ) {
 										ul_LowTimerValue
 											=
-											(ULONG)
+											(unsigned int)
 											(
 											(double)
 											(ul_LowTimerValue)
@@ -2469,26 +2469,26 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 
 									break;
 
-				/******/
+									/******/
 									/* æs */
-				/******/
+									/******/
 
 								case 1:
 
-					/******************/
+									/******************/
 									/* Timer 0 factor */
-					/******************/
+									/******************/
 
 									ul_LowTimerValue
 										=
-										(ULONG)
+										(unsigned int)
 										(ul_LowTiming
 										*
 										(0.25 * b_ClockSelection));
 
-					/*******************/
+									/*******************/
 									/* Round the value */
-					/*******************/
+									/*******************/
 
 									if ((double)((double)ul_LowTiming * (0.25 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) {
 										ul_LowTimerValue
@@ -2498,13 +2498,13 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 											1;
 									}
 
-					/*****************************/
+									/*****************************/
 									/* Calculate the real timing */
-					/*****************************/
+									/*****************************/
 
 									ul_RealLowTiming
 										=
-										(ULONG)
+										(unsigned int)
 										(ul_LowTimerValue
 										/
 										(0.25 * (double)b_ClockSelection));
@@ -2542,7 +2542,7 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 									if (b_ClockSelection != APCI1710_40MHZ) {
 										ul_LowTimerValue
 											=
-											(ULONG)
+											(unsigned int)
 											(
 											(double)
 											(ul_LowTimerValue)
@@ -2552,15 +2552,15 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 
 									break;
 
-				/******/
+									/******/
 									/* ms */
-				/******/
+									/******/
 
 								case 2:
 
-					/******************/
+									/******************/
 									/* Timer 0 factor */
-					/******************/
+									/******************/
 
 									ul_LowTimerValue
 										=
@@ -2570,9 +2570,9 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 										*
 										b_ClockSelection);
 
-					/*******************/
+									/*******************/
 									/* Round the value */
-					/*******************/
+									/*******************/
 
 									if ((double)((double)ul_LowTiming * (250.0 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) {
 										ul_LowTimerValue
@@ -2582,13 +2582,13 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 											1;
 									}
 
-					/*****************************/
+									/*****************************/
 									/* Calculate the real timing */
-					/*****************************/
+									/*****************************/
 
 									ul_RealLowTiming
 										=
-										(ULONG)
+										(unsigned int)
 										(ul_LowTimerValue
 										/
 										(250.0 * (double)b_ClockSelection));
@@ -2624,7 +2624,7 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 									if (b_ClockSelection != APCI1710_40MHZ) {
 										ul_LowTimerValue
 											=
-											(ULONG)
+											(unsigned int)
 											(
 											(double)
 											(ul_LowTimerValue)
@@ -2634,28 +2634,28 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 
 									break;
 
-				/*****/
+									/*****/
 									/* s */
-				/*****/
+									/*****/
 
 								case 3:
 
-					/******************/
+									/******************/
 									/* Timer 0 factor */
-					/******************/
+									/******************/
 
 									ul_LowTimerValue
 										=
-										(ULONG)
+										(unsigned int)
 										(ul_LowTiming
 										*
 										(250000.0
 											*
 											b_ClockSelection));
 
-					/*******************/
+									/*******************/
 									/* Round the value */
-					/*******************/
+									/*******************/
 
 									if ((double)((double)ul_LowTiming * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) {
 										ul_LowTimerValue
@@ -2665,13 +2665,13 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 											1;
 									}
 
-					/*****************************/
+									/*****************************/
 									/* Calculate the real timing */
-					/*****************************/
+									/*****************************/
 
 									ul_RealLowTiming
 										=
-										(ULONG)
+										(unsigned int)
 										(ul_LowTimerValue
 										/
 										(250000.0
@@ -2710,7 +2710,7 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 									if (b_ClockSelection != APCI1710_40MHZ) {
 										ul_LowTimerValue
 											=
-											(ULONG)
+											(unsigned int)
 											(
 											(double)
 											(ul_LowTimerValue)
@@ -2720,19 +2720,19 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 
 									break;
 
-				/******/
+									/******/
 									/* mn */
-				/******/
+									/******/
 
 								case 4:
 
-					/******************/
+									/******************/
 									/* Timer 0 factor */
-					/******************/
+									/******************/
 
 									ul_LowTimerValue
 										=
-										(ULONG)
+										(unsigned int)
 										(
 										(ul_LowTiming
 											*
@@ -2742,9 +2742,9 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 											*
 											b_ClockSelection));
 
-					/*******************/
+									/*******************/
 									/* Round the value */
-					/*******************/
+									/*******************/
 
 									if ((double)((double)(ul_LowTiming * 60.0) * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) {
 										ul_LowTimerValue
@@ -2754,13 +2754,13 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 											1;
 									}
 
-					/*****************************/
+									/*****************************/
 									/* Calculate the real timing */
-					/*****************************/
+									/*****************************/
 
 									ul_RealLowTiming
 										=
-										(ULONG)
+										(unsigned int)
 										(ul_LowTimerValue
 										/
 										(250000.0
@@ -2804,7 +2804,7 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 									if (b_ClockSelection != APCI1710_40MHZ) {
 										ul_LowTimerValue
 											=
-											(ULONG)
+											(unsigned int)
 											(
 											(double)
 											(ul_LowTimerValue)
@@ -2815,31 +2815,31 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 									break;
 								}
 
-			     /*************************************/
+								/*************************************/
 								/* Calculate the high division fator */
-			     /*************************************/
+								/*************************************/
 
 								switch (b_TimingUnit) {
-				/******/
+									/******/
 									/* ns */
-				/******/
+									/******/
 
 								case 0:
 
-					/******************/
+									/******************/
 									/* Timer 0 factor */
-					/******************/
+									/******************/
 
 									ul_HighTimerValue
 										=
-										(ULONG)
+										(unsigned int)
 										(ul_HighTiming
 										*
 										(0.00025 * b_ClockSelection));
 
-					/*******************/
+									/*******************/
 									/* Round the value */
-					/*******************/
+									/*******************/
 
 									if ((double)((double)ul_HighTiming * (0.00025 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) {
 										ul_HighTimerValue
@@ -2849,13 +2849,13 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 											1;
 									}
 
-					/*****************************/
+									/*****************************/
 									/* Calculate the real timing */
-					/*****************************/
+									/*****************************/
 
 									ul_RealHighTiming
 										=
-										(ULONG)
+										(unsigned int)
 										(ul_HighTimerValue
 										/
 										(0.00025 * (double)b_ClockSelection));
@@ -2891,7 +2891,7 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 									if (b_ClockSelection != APCI1710_40MHZ) {
 										ul_HighTimerValue
 											=
-											(ULONG)
+											(unsigned int)
 											(
 											(double)
 											(ul_HighTimerValue)
@@ -2901,26 +2901,26 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 
 									break;
 
-				/******/
+									/******/
 									/* æs */
-				/******/
+									/******/
 
 								case 1:
 
-					/******************/
+									/******************/
 									/* Timer 0 factor */
-					/******************/
+									/******************/
 
 									ul_HighTimerValue
 										=
-										(ULONG)
+										(unsigned int)
 										(ul_HighTiming
 										*
 										(0.25 * b_ClockSelection));
 
-					/*******************/
+									/*******************/
 									/* Round the value */
-					/*******************/
+									/*******************/
 
 									if ((double)((double)ul_HighTiming * (0.25 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) {
 										ul_HighTimerValue
@@ -2930,13 +2930,13 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 											1;
 									}
 
-					/*****************************/
+									/*****************************/
 									/* Calculate the real timing */
-					/*****************************/
+									/*****************************/
 
 									ul_RealHighTiming
 										=
-										(ULONG)
+										(unsigned int)
 										(ul_HighTimerValue
 										/
 										(0.25 * (double)b_ClockSelection));
@@ -2974,7 +2974,7 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 									if (b_ClockSelection != APCI1710_40MHZ) {
 										ul_HighTimerValue
 											=
-											(ULONG)
+											(unsigned int)
 											(
 											(double)
 											(ul_HighTimerValue)
@@ -2984,15 +2984,15 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 
 									break;
 
-				/******/
+									/******/
 									/* ms */
-				/******/
+									/******/
 
 								case 2:
 
-					/******************/
+									/******************/
 									/* Timer 0 factor */
-					/******************/
+									/******************/
 
 									ul_HighTimerValue
 										=
@@ -3002,9 +3002,9 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 										*
 										b_ClockSelection);
 
-					/*******************/
+									/*******************/
 									/* Round the value */
-					/*******************/
+									/*******************/
 
 									if ((double)((double)ul_HighTiming * (250.0 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) {
 										ul_HighTimerValue
@@ -3014,13 +3014,13 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 											1;
 									}
 
-					/*****************************/
+									/*****************************/
 									/* Calculate the real timing */
-					/*****************************/
+									/*****************************/
 
 									ul_RealHighTiming
 										=
-										(ULONG)
+										(unsigned int)
 										(ul_HighTimerValue
 										/
 										(250.0 * (double)b_ClockSelection));
@@ -3056,7 +3056,7 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 									if (b_ClockSelection != APCI1710_40MHZ) {
 										ul_HighTimerValue
 											=
-											(ULONG)
+											(unsigned int)
 											(
 											(double)
 											(ul_HighTimerValue)
@@ -3066,28 +3066,28 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 
 									break;
 
-				/*****/
+									/*****/
 									/* s */
-				/*****/
+									/*****/
 
 								case 3:
 
-					/******************/
+									/******************/
 									/* Timer 0 factor */
-					/******************/
+									/******************/
 
 									ul_HighTimerValue
 										=
-										(ULONG)
+										(unsigned int)
 										(ul_HighTiming
 										*
 										(250000.0
 											*
 											b_ClockSelection));
 
-					/*******************/
+									/*******************/
 									/* Round the value */
-					/*******************/
+									/*******************/
 
 									if ((double)((double)ul_HighTiming * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) {
 										ul_HighTimerValue
@@ -3097,13 +3097,13 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 											1;
 									}
 
-					/*****************************/
+									/*****************************/
 									/* Calculate the real timing */
-					/*****************************/
+									/*****************************/
 
 									ul_RealHighTiming
 										=
-										(ULONG)
+										(unsigned int)
 										(ul_HighTimerValue
 										/
 										(250000.0
@@ -3142,7 +3142,7 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 									if (b_ClockSelection != APCI1710_40MHZ) {
 										ul_HighTimerValue
 											=
-											(ULONG)
+											(unsigned int)
 											(
 											(double)
 											(ul_HighTimerValue)
@@ -3152,19 +3152,19 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 
 									break;
 
-				/******/
+									/******/
 									/* mn */
-				/******/
+									/******/
 
 								case 4:
 
-					/******************/
+									/******************/
 									/* Timer 0 factor */
-					/******************/
+									/******************/
 
 									ul_HighTimerValue
 										=
-										(ULONG)
+										(unsigned int)
 										(
 										(ul_HighTiming
 											*
@@ -3174,9 +3174,9 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 											*
 											b_ClockSelection));
 
-					/*******************/
+									/*******************/
 									/* Round the value */
-					/*******************/
+									/*******************/
 
 									if ((double)((double)(ul_HighTiming * 60.0) * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) {
 										ul_HighTimerValue
@@ -3186,13 +3186,13 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 											1;
 									}
 
-					/*****************************/
+									/*****************************/
 									/* Calculate the real timing */
-					/*****************************/
+									/*****************************/
 
 									ul_RealHighTiming
 										=
-										(ULONG)
+										(unsigned int)
 										(ul_HighTimerValue
 										/
 										(250000.0
@@ -3236,7 +3236,7 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 									if (b_ClockSelection != APCI1710_40MHZ) {
 										ul_HighTimerValue
 											=
-											(ULONG)
+											(unsigned int)
 											(
 											(double)
 											(ul_HighTimerValue)
@@ -3249,9 +3249,9 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 
 								fpu_end();
 
-			     /************************/
+								/************************/
 								/* Save the timing unit */
-			     /************************/
+								/************************/
 
 								devpriv->
 									s_ModuleInfo
@@ -3263,9 +3263,9 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 									=
 									b_TimingUnit;
 
-			     /****************************/
+								/****************************/
 								/* Save the low base timing */
-			     /****************************/
+								/****************************/
 
 								devpriv->
 									s_ModuleInfo
@@ -3287,9 +3287,9 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 									=
 									ul_RealLowTiming;
 
-			     /****************************/
+								/****************************/
 								/* Save the high base timing */
-			     /****************************/
+								/****************************/
 
 								devpriv->
 									s_ModuleInfo
@@ -3311,21 +3311,21 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 									=
 									ul_RealHighTiming;
 
-			     /************************/
+								/************************/
 								/* Write the low timing */
-			     /************************/
+								/************************/
 
 								outl(ul_LowTimerValue, devpriv->s_BoardInfos.ui_Address + 0 + (20 * b_PWM) + (64 * b_ModulNbr));
 
-			     /*************************/
+								/*************************/
 								/* Write the high timing */
-			     /*************************/
+								/*************************/
 
 								outl(ul_HighTimerValue, devpriv->s_BoardInfos.ui_Address + 4 + (20 * b_PWM) + (64 * b_ModulNbr));
 
-			     /***************************/
+								/***************************/
 								/* Set the clock selection */
-			     /***************************/
+								/***************************/
 
 								dw_Command =
 									inl
@@ -3347,9 +3347,9 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 										0x80;
 								}
 
-			     /***************************/
+								/***************************/
 								/* Set the clock selection */
-			     /***************************/
+								/***************************/
 
 								outl(dw_Command,
 									devpriv->
@@ -3358,96 +3358,96 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 									+ 8 +
 									(20 * b_PWM) + (64 * b_ModulNbr));
 							} else {
-			     /***************************************/
+								/***************************************/
 								/* High base timing selection is wrong */
-			     /***************************************/
+								/***************************************/
 								DPRINTK("High base timing selection is wrong\n");
 								i_ReturnValue =
 									-8;
 							}
 						} else {
-			  /**************************************/
+							/**************************************/
 							/* Low base timing selection is wrong */
-			  /**************************************/
+							/**************************************/
 							DPRINTK("Low base timing selection is wrong\n");
 							i_ReturnValue = -7;
 						}
-					}	// if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4))
+					}	/*  if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) */
 					else {
-		       /**********************************/
+						/**********************************/
 						/* Timing unit selection is wrong */
-		       /**********************************/
+						/**********************************/
 						DPRINTK("Timing unit selection is wrong\n");
 						i_ReturnValue = -6;
-					}	// if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4))
-				}	// if (dw_Status & 0x10)
+					}	/*  if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) */
+				}	/*  if (dw_Status & 0x10) */
 				else {
-		    /***********************/
+					/***********************/
 					/* PWM not initialised */
-		    /***********************/
+					/***********************/
 					DPRINTK("PWM not initialised\n");
 					i_ReturnValue = -5;
-				}	// if (dw_Status & 0x10)
-			}	// if (b_PWM >= 0 && b_PWM <= 1)
+				}	/*  if (dw_Status & 0x10) */
+			}	/*  if (b_PWM >= 0 && b_PWM <= 1) */
 			else {
-		 /******************************/
+				/******************************/
 				/* Tor PWM selection is wrong */
-		 /******************************/
+				/******************************/
 				DPRINTK("Tor PWM selection is wrong\n");
 				i_ReturnValue = -4;
-			}	// if (b_PWM >= 0 && b_PWM <= 1)
+			}	/*  if (b_PWM >= 0 && b_PWM <= 1) */
 		} else {
-	      /**********************************/
+			/**********************************/
 			/* The module is not a PWM module */
-	      /**********************************/
+			/**********************************/
 			DPRINTK("The module is not a PWM module\n");
 			i_ReturnValue = -3;
 		}
 	} else {
-	   /***********************/
+		/***********************/
 		/* Module number error */
-	   /***********************/
+		/***********************/
 		DPRINTK("Module number error\n");
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_GetPWMStatus                          |
-|                               (BYTE_    b_BoardHandle,                     |
-|                                BYTE_    b_ModulNbr,                        |
-|                                BYTE_    b_PWM,                             |
-|                                PBYTE_  pb_PWMOutputStatus,                 |
-|                                PBYTE_  pb_ExternGateStatus)                |
+|                               (unsigned char_    b_BoardHandle,                     |
+|                                unsigned char_    b_ModulNbr,                        |
+|                                unsigned char_    b_PWM,                             |
+|                                unsigned char *_  pb_PWMOutputStatus,                 |
+|                                unsigned char *_  pb_ExternGateStatus)                |
 +----------------------------------------------------------------------------+
 | Task              : Return the status from selected PWM (b_PWM) from       |
 |                     selected module (b_ModulNbr).                          |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_  b_BoardHandle : Handle of board APCI-1710       |
-|                     BYTE_  b_PWM         : Selected PWM (0 or 1)           |
-|                     BYTE_  b_ModulNbr    : Selected module number (0 to 3)
-	b_ModulNbr			=(BYTE)  CR_AREF(insn->chanspec);
-	b_PWM				=(BYTE)  data[0];
+| Input Parameters  : unsigned char_  b_BoardHandle : Handle of board APCI-1710       |
+|                     unsigned char_  b_PWM         : Selected PWM (0 or 1)           |
+|                     unsigned char_  b_ModulNbr    : Selected module number (0 to 3)
+	b_ModulNbr			=(unsigned char)  CR_AREF(insn->chanspec);
+	b_PWM				=(unsigned char)  data[0];
 
  |
 +----------------------------------------------------------------------------+
-| Output Parameters : PBYTE_  pb_PWMOutputStatus  : Return the PWM output    |
+| Output Parameters : unsigned char *_  pb_PWMOutputStatus  : Return the PWM output    |
 |                                                   level status.            |
 |                                                    0 : The PWM output level|
 |                                                        is low.             |
 |                                                    1 : The PWM output level|
 |                                                        is high.            |
-|                     PBYTE_  pb_ExternGateStatus : Return the extern gate   |
+|                     unsigned char *_  pb_ExternGateStatus : Return the extern gate   |
 |                                                   level status.            |
 |                                                    0 : The extern gate is  |
 |                                                        low.                |
 |                                                    1 : The extern gate is  |
 |                                                        high.
-    pb_PWMOutputStatus	=(PBYTE) data[0];
-	pb_ExternGateStatus =(PBYTE) data[1];             |
+    pb_PWMOutputStatus	=(unsigned char *) data[0];
+	pb_ExternGateStatus =(unsigned char *) data[1];             |
 +----------------------------------------------------------------------------+
 | Return Value      :  0: No error                                           |
 |                     -1: The handle parameter of the board is wrong         |
@@ -3460,109 +3460,109 @@ INT i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InsnReadGetPWMStatus(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnReadGetPWMStatus(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_Status;
+	int i_ReturnValue = 0;
+	unsigned int dw_Status;
 
-	BYTE b_ModulNbr;
-	BYTE b_PWM;
-	PBYTE pb_PWMOutputStatus;
-	PBYTE pb_ExternGateStatus;
+	unsigned char b_ModulNbr;
+	unsigned char b_PWM;
+	unsigned char *pb_PWMOutputStatus;
+	unsigned char *pb_ExternGateStatus;
 
 	i_ReturnValue = insn->n;
-	b_ModulNbr = (BYTE) CR_AREF(insn->chanspec);
-	b_PWM = (BYTE) CR_CHAN(insn->chanspec);
-	pb_PWMOutputStatus = (PBYTE) & data[0];
-	pb_ExternGateStatus = (PBYTE) & data[1];
+	b_ModulNbr = (unsigned char) CR_AREF(insn->chanspec);
+	b_PWM = (unsigned char) CR_CHAN(insn->chanspec);
+	pb_PWMOutputStatus = (unsigned char *) &data[0];
+	pb_ExternGateStatus = (unsigned char *) &data[1];
 
 	/**************************/
 	/* Test the module number */
 	/**************************/
 
 	if (b_ModulNbr < 4) {
-	   /***************/
+		/***************/
 		/* Test if PWM */
-	   /***************/
+		/***************/
 
 		if ((devpriv->s_BoardInfos.
 				dw_MolduleConfiguration[b_ModulNbr] &
 				0xFFFF0000UL) == APCI1710_PWM) {
-	      /**************************/
+			/**************************/
 			/* Test the PWM selection */
-	      /**************************/
+			/**************************/
 
 			if (b_PWM <= 1) {
-		 /***************************/
+				/***************************/
 				/* Test if PWM initialised */
-		 /***************************/
+				/***************************/
 
 				dw_Status = inl(devpriv->s_BoardInfos.
 					ui_Address + 12 + (20 * b_PWM) +
 					(64 * b_ModulNbr));
 
 				if (dw_Status & 0x10) {
-		    /***********************/
+					/***********************/
 					/* Test if PWM enabled */
-		    /***********************/
+					/***********************/
 
 					if (dw_Status & 0x1) {
 						*pb_PWMOutputStatus =
-							(BYTE) ((dw_Status >> 7)
+							(unsigned char) ((dw_Status >> 7)
 							& 1);
 						*pb_ExternGateStatus =
-							(BYTE) ((dw_Status >> 6)
+							(unsigned char) ((dw_Status >> 6)
 							& 1);
-					}	// if (dw_Status & 0x1)
+					}	/*  if (dw_Status & 0x1) */
 					else {
-		       /*******************/
+						/*******************/
 						/* PWM not enabled */
-		       /*******************/
+						/*******************/
 
 						DPRINTK("PWM not enabled \n");
 						i_ReturnValue = -6;
-					}	// if (dw_Status & 0x1)
-				}	// if (dw_Status & 0x10)
+					}	/*  if (dw_Status & 0x1) */
+				}	/*  if (dw_Status & 0x10) */
 				else {
-		    /***********************/
+					/***********************/
 					/* PWM not initialised */
-		    /***********************/
+					/***********************/
 
 					DPRINTK("PWM not initialised\n");
 					i_ReturnValue = -5;
-				}	// if (dw_Status & 0x10)
-			}	// if (b_PWM >= 0 && b_PWM <= 1)
+				}	/*  if (dw_Status & 0x10) */
+			}	/*  if (b_PWM >= 0 && b_PWM <= 1) */
 			else {
-		 /******************************/
+				/******************************/
 				/* Tor PWM selection is wrong */
-		 /******************************/
+				/******************************/
 
 				DPRINTK("Tor PWM selection is wrong\n");
 				i_ReturnValue = -4;
-			}	// if (b_PWM >= 0 && b_PWM <= 1)
+			}	/*  if (b_PWM >= 0 && b_PWM <= 1) */
 		} else {
-	      /**********************************/
+			/**********************************/
 			/* The module is not a PWM module */
-	      /**********************************/
+			/**********************************/
 
 			DPRINTK("The module is not a PWM module\n");
 			i_ReturnValue = -3;
 		}
 	} else {
-	   /***********************/
+		/***********************/
 		/* Module number error */
-	   /***********************/
+		/***********************/
 
 		DPRINTK("Module number error\n");
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
-INT i_APCI1710_InsnBitsReadPWMInterrupt(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnBitsReadPWMInterrupt(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 	data[0] = devpriv->s_InterruptParameters.
 		s_FIFOInterruptParameters[devpriv->
@@ -3574,9 +3574,9 @@ INT i_APCI1710_InsnBitsReadPWMInterrupt(struct comedi_device * dev,
 		s_FIFOInterruptParameters[devpriv->
 		s_InterruptParameters.ui_Read].ul_OldCounterLatchValue;
 
-			     /**************************/
+	/**************************/
 	/* Increment the read FIFO */
-			     /***************************/
+	/***************************/
 
 	devpriv->
 		s_InterruptParameters.
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.h
index c1b7f4ca47c..bf1b4c39a1c 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.h
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.h
@@ -26,51 +26,51 @@
 #define APCI1710_PWM_ENABLE		1
 #define APCI1710_PWM_NEWTIMING		2
 
-INT i_APCI1710_InsnConfigPWM(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI1710_InsnConfigPWM(struct comedi_device *dev, struct comedi_subdevice *s,
 			     struct comedi_insn *insn, unsigned int *data);
 
-INT i_APCI1710_InitPWM(struct comedi_device *dev,
-		       BYTE b_ModulNbr,
-		       BYTE b_PWM,
-		       BYTE b_ClockSelection,
-		       BYTE b_TimingUnit,
-		       ULONG ul_LowTiming,
-		       ULONG ul_HighTiming,
-		       PULONG pul_RealLowTiming, PULONG pul_RealHighTiming);
+int i_APCI1710_InitPWM(struct comedi_device *dev,
+		       unsigned char b_ModulNbr,
+		       unsigned char b_PWM,
+		       unsigned char b_ClockSelection,
+		       unsigned char b_TimingUnit,
+		       unsigned int ul_LowTiming,
+		       unsigned int ul_HighTiming,
+		       unsigned int *pul_RealLowTiming, unsigned int *pul_RealHighTiming);
 
-INT i_APCI1710_GetPWMInitialisation(struct comedi_device *dev,
-				    BYTE b_ModulNbr,
-				    BYTE b_PWM,
-				    PBYTE pb_TimingUnit,
-				    PULONG pul_LowTiming,
-				    PULONG pul_HighTiming,
-				    PBYTE pb_StartLevel,
-				    PBYTE pb_StopMode,
-				    PBYTE pb_StopLevel,
-				    PBYTE pb_ExternGate,
-				    PBYTE pb_InterruptEnable, PBYTE pb_Enable);
+int i_APCI1710_GetPWMInitialisation(struct comedi_device *dev,
+				    unsigned char b_ModulNbr,
+				    unsigned char b_PWM,
+				    unsigned char *pb_TimingUnit,
+				    unsigned int *pul_LowTiming,
+				    unsigned int *pul_HighTiming,
+				    unsigned char *pb_StartLevel,
+				    unsigned char *pb_StopMode,
+				    unsigned char *pb_StopLevel,
+				    unsigned char *pb_ExternGate,
+				    unsigned char *pb_InterruptEnable, unsigned char *pb_Enable);
 
-INT i_APCI1710_InsnWritePWM(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI1710_InsnWritePWM(struct comedi_device *dev, struct comedi_subdevice *s,
 			    struct comedi_insn *insn, unsigned int *data);
 
-INT i_APCI1710_EnablePWM(struct comedi_device *dev,
-			 BYTE b_ModulNbr,
-			 BYTE b_PWM,
-			 BYTE b_StartLevel,
-			 BYTE b_StopMode,
-			 BYTE b_StopLevel, BYTE b_ExternGate,
-			 BYTE b_InterruptEnable);
+int i_APCI1710_EnablePWM(struct comedi_device *dev,
+			 unsigned char b_ModulNbr,
+			 unsigned char b_PWM,
+			 unsigned char b_StartLevel,
+			 unsigned char b_StopMode,
+			 unsigned char b_StopLevel, unsigned char b_ExternGate,
+			 unsigned char b_InterruptEnable);
 
-INT i_APCI1710_SetNewPWMTiming(struct comedi_device *dev,
-			       BYTE b_ModulNbr,
-			       BYTE b_PWM, BYTE b_TimingUnit,
-			       ULONG ul_LowTiming, ULONG ul_HighTiming);
+int i_APCI1710_SetNewPWMTiming(struct comedi_device *dev,
+			       unsigned char b_ModulNbr,
+			       unsigned char b_PWM, unsigned char b_TimingUnit,
+			       unsigned int ul_LowTiming, unsigned int ul_HighTiming);
 
-INT i_APCI1710_DisablePWM(struct comedi_device *dev, BYTE b_ModulNbr, BYTE b_PWM);
+int i_APCI1710_DisablePWM(struct comedi_device *dev, unsigned char b_ModulNbr, unsigned char b_PWM);
 
-INT i_APCI1710_InsnReadGetPWMStatus(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI1710_InsnReadGetPWMStatus(struct comedi_device *dev, struct comedi_subdevice *s,
 				    struct comedi_insn *insn, unsigned int *data);
 
-INT i_APCI1710_InsnBitsReadPWMInterrupt(struct comedi_device *dev,
+int i_APCI1710_InsnBitsReadPWMInterrupt(struct comedi_device *dev,
 					struct comedi_subdevice *s,
 					struct comedi_insn *insn, unsigned int *data);
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.c
index bb6e1622e37..a445dab50ea 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.c
@@ -3,13 +3,13 @@
 
 Copyright (C) 2004,2005  ADDI-DATA GmbH for the source code of this module.
 
-        ADDI-DATA GmbH
-        Dieselstrasse 3
-        D-77833 Ottersweier
-        Tel: +19(0)7223/9493-0
-        Fax: +49(0)7223/9493-92
-        http://www.addi-data-com
-        info@addi-data.com
+	ADDI-DATA GmbH
+	Dieselstrasse 3
+	D-77833 Ottersweier
+	Tel: +19(0)7223/9493-0
+	Fax: +49(0)7223/9493-92
+	http://www.addi-data-com
+	info@addi-data.com
 
 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
 
@@ -65,31 +65,31 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_InitSSI                               |
-|                               (BYTE_    b_BoardHandle,                     |
-|                                BYTE_    b_ModulNbr,                        |
-|                                BYTE_    b_SSIProfile,                      |
-|                                BYTE_    b_PositionTurnLength,              |
-|                                BYTE_    b_TurnCptLength,                   |
-|                                BYTE_    b_PCIInputClock,                   |
+|                               (unsigned char_    b_BoardHandle,                     |
+|                                unsigned char_    b_ModulNbr,                        |
+|                                unsigned char_    b_SSIProfile,                      |
+|                                unsigned char_    b_PositionTurnLength,              |
+|                                unsigned char_    b_TurnCptLength,                   |
+|                                unsigned char_    b_PCIInputClock,                   |
 |                                ULONG_  ul_SSIOutputClock,                  |
-|                                BYTE_    b_SSICountingMode)                 |
+|                                unsigned char_    b_SSICountingMode)                 |
 +----------------------------------------------------------------------------+
 | Task              : Configure the SSI operating mode from selected module  |
 |                     (b_ModulNbr). You must calling this function be for you|
 |                     call any other function witch access of SSI.           |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle         : Handle of board APCI-1710|
-|                     BYTE_ b_ModulNbr            : Module number to         |
+| Input Parameters  : unsigned char_ b_BoardHandle         : Handle of board APCI-1710|
+|                     unsigned char_ b_ModulNbr            : Module number to         |
 |                                                   configure (0 to 3)       |
-|                     BYTE_  b_SSIProfile         : Selection from SSI       |
+|                     unsigned char_  b_SSIProfile         : Selection from SSI       |
 |                                                   profile length (2 to 32).|
-|                     BYTE_  b_PositionTurnLength : Selection from SSI       |
+|                     unsigned char_  b_PositionTurnLength : Selection from SSI       |
 |                                                   position data length     |
 |                                                   (1 to 31).               |
-|                     BYTE_  b_TurnCptLength      : Selection from SSI turn  |
+|                     unsigned char_  b_TurnCptLength      : Selection from SSI turn  |
 |                                                   counter data length      |
 |                                                   (1 to 31).               |
-|                     BYTE   b_PCIInputClock      : Selection from PCI bus   |
+|                     unsigned char   b_PCIInputClock      : Selection from PCI bus   |
 |                                                   clock                    |
 |                                                 - APCI1710_30MHZ :         |
 |                                                   The PC have a PCI bus    |
@@ -103,7 +103,7 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 |                                                   for 30 MHz selection.    |
 |                                                   From  252 to 5 000 000 Hz|
 |                                                   for 33 MHz selection.    |
-|                     BYTE   b_SSICountingMode    : SSI counting mode        |
+|                     unsigned char   b_SSICountingMode    : SSI counting mode        |
 |                                                   selection                |
 |                                                 - APCI1710_BINARY_MODE :   |
 |                                                    Binary counting mode.   |
@@ -111,12 +111,12 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 |                                                    Gray counting mode.
 
 	b_ModulNbr			= CR_AREF(insn->chanspec);
-	b_SSIProfile		= (BYTE) data[0];
-	b_PositionTurnLength= (BYTE) data[1];
-	b_TurnCptLength		= (BYTE) data[2];
-	b_PCIInputClock		= (BYTE) data[3];
-	ul_SSIOutputClock	= (ULONG) data[4];
-	b_SSICountingMode	= (BYTE)  data[5];     |
+	b_SSIProfile		= (unsigned char) data[0];
+	b_PositionTurnLength= (unsigned char) data[1];
+	b_TurnCptLength		= (unsigned char) data[2];
+	b_PCIInputClock		= (unsigned char) data[3];
+	ul_SSIOutputClock	= (unsigned int) data[4];
+	b_SSICountingMode	= (unsigned char)  data[5];     |
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
 +----------------------------------------------------------------------------+
@@ -133,22 +133,22 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InsnConfigInitSSI(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnConfigInitSSI(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = 0;
-	UINT ui_TimerValue;
-	BYTE b_ModulNbr, b_SSIProfile, b_PositionTurnLength, b_TurnCptLength,
+	int i_ReturnValue = 0;
+	unsigned int ui_TimerValue;
+	unsigned char b_ModulNbr, b_SSIProfile, b_PositionTurnLength, b_TurnCptLength,
 		b_PCIInputClock, b_SSICountingMode;
-	ULONG ul_SSIOutputClock;
+	unsigned int ul_SSIOutputClock;
 
 	b_ModulNbr = CR_AREF(insn->chanspec);
-	b_SSIProfile = (BYTE) data[0];
-	b_PositionTurnLength = (BYTE) data[1];
-	b_TurnCptLength = (BYTE) data[2];
-	b_PCIInputClock = (BYTE) data[3];
-	ul_SSIOutputClock = (ULONG) data[4];
-	b_SSICountingMode = (BYTE) data[5];
+	b_SSIProfile = (unsigned char) data[0];
+	b_PositionTurnLength = (unsigned char) data[1];
+	b_TurnCptLength = (unsigned char) data[2];
+	b_PCIInputClock = (unsigned char) data[3];
+	ul_SSIOutputClock = (unsigned int) data[4];
+	b_SSICountingMode = (unsigned char) data[5];
 
 	i_ReturnValue = insn->n;
 	/**************************/
@@ -167,7 +167,7 @@ INT i_APCI1710_InsnConfigInitSSI(struct comedi_device * dev, struct comedi_subde
 			/* Test the SSI profile length */
 	      /*******************************/
 
-			// CG 22/03/00 b_SSIProfile >= 2 anstatt b_SSIProfile > 2
+			/*  CG 22/03/00 b_SSIProfile >= 2 anstatt b_SSIProfile > 2 */
 			if (b_SSIProfile >= 2 && b_SSIProfile < 33) {
 		 /*************************************/
 				/* Test the SSI position data length */
@@ -250,9 +250,9 @@ INT i_APCI1710_InsnConfigInitSSI(struct comedi_device * dev, struct comedi_subde
 
 										ui_TimerValue
 											=
-											(UINT)
+											(unsigned int)
 											(
-											((ULONG) (b_PCIInputClock) * 500000UL) / ul_SSIOutputClock);
+											((unsigned int) (b_PCIInputClock) * 500000UL) / ul_SSIOutputClock);
 
 				   /************************/
 										/* Initialise the timer */
@@ -351,18 +351,18 @@ INT i_APCI1710_InsnConfigInitSSI(struct comedi_device * dev, struct comedi_subde
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_  i_APCI1710_Read1SSIValue                        |
-|                               (BYTE_     b_BoardHandle,                    |
-|                                BYTE_     b_ModulNbr,                       |
-|                                BYTE_     b_SelectedSSI,                    |
+|                               (unsigned char_     b_BoardHandle,                    |
+|                                unsigned char_     b_ModulNbr,                       |
+|                                unsigned char_     b_SelectedSSI,                    |
 |                                PULONG_ pul_Position,                       |
 |                                PULONG_ pul_TurnCpt)
- INT i_APCI1710_ReadSSIValue(struct comedi_device *dev,struct comedi_subdevice *s,
+ int i_APCI1710_ReadSSIValue(struct comedi_device *dev,struct comedi_subdevice *s,
 	struct comedi_insn *insn,unsigned int *data)                       |
 +----------------------------------------------------------------------------+
 | Task              :
@@ -373,22 +373,22 @@ INT i_APCI1710_InsnConfigInitSSI(struct comedi_device * dev, struct comedi_subde
 						or Read all SSI counter (b_SelectedSSI) from              |
 |                     selected module (b_ModulNbr).                            |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle         : Handle of board APCI-1710|
-|                     BYTE_ b_ModulNbr            : Module number to         |
+| Input Parameters  : unsigned char_ b_BoardHandle         : Handle of board APCI-1710|
+|                     unsigned char_ b_ModulNbr            : Module number to         |
 |                                                   configure (0 to 3)       |
-|                     BYTE_ b_SelectedSSI         : Selection from SSI       |
+|                     unsigned char_ b_SelectedSSI         : Selection from SSI       |
 |                                                   counter (0 to 2)
 
-    b_ModulNbr		=   (BYTE) CR_AREF(insn->chanspec);
-	b_SelectedSSI	=	(BYTE) CR_CHAN(insn->chanspec); (in case of single ssi)
-	b_ReadType		=	(BYTE) CR_RANGE(insn->chanspec);
+    b_ModulNbr		=   (unsigned char) CR_AREF(insn->chanspec);
+	b_SelectedSSI	=	(unsigned char) CR_CHAN(insn->chanspec); (in case of single ssi)
+	b_ReadType		=	(unsigned char) CR_RANGE(insn->chanspec);
 |
 +----------------------------------------------------------------------------+
 | Output Parameters : PULONG_  pul_Position       : SSI position in the turn |
 |                     PULONG_  pul_TurnCpt        : Number of turns
 
-pul_Position	=	(PULONG) &data[0];
-	pul_TurnCpt		=	(PULONG) &data[1];         |
+pul_Position	=	(unsigned int *) &data[0];
+	pul_TurnCpt		=	(unsigned int *) &data[1];         |
 +----------------------------------------------------------------------------+
 | Return Value      : 0: No error                                            |
 |                    -1: The handle parameter of the board is wrong          |
@@ -400,37 +400,37 @@ pul_Position	=	(PULONG) &data[0];
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InsnReadSSIValue(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnReadSSIValue(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = 0;
-	BYTE b_Cpt;
-	BYTE b_Length;
-	BYTE b_Schift;
-	BYTE b_SSICpt;
-	DWORD dw_And;
-	DWORD dw_And1;
-	DWORD dw_And2;
-	DWORD dw_StatusReg;
-	DWORD dw_CounterValue;
-	BYTE b_ModulNbr;
-	BYTE b_SelectedSSI;
-	BYTE b_ReadType;
-	PULONG pul_Position;
-	PULONG pul_TurnCpt;
-	PULONG pul_Position1;
-	PULONG pul_TurnCpt1;
+	int i_ReturnValue = 0;
+	unsigned char b_Cpt;
+	unsigned char b_Length;
+	unsigned char b_Schift;
+	unsigned char b_SSICpt;
+	unsigned int dw_And;
+	unsigned int dw_And1;
+	unsigned int dw_And2;
+	unsigned int dw_StatusReg;
+	unsigned int dw_CounterValue;
+	unsigned char b_ModulNbr;
+	unsigned char b_SelectedSSI;
+	unsigned char b_ReadType;
+	unsigned int *pul_Position;
+	unsigned int *pul_TurnCpt;
+	unsigned int *pul_Position1;
+	unsigned int *pul_TurnCpt1;
 
 	i_ReturnValue = insn->n;
-	pul_Position1 = (PULONG) & data[0];
-// For Read1
-	pul_TurnCpt1 = (PULONG) & data[1];
-// For Read all
-	pul_Position = (PULONG) & data[0];	//0-2
-	pul_TurnCpt = (PULONG) & data[3];	//3-5
-	b_ModulNbr = (BYTE) CR_AREF(insn->chanspec);
-	b_SelectedSSI = (BYTE) CR_CHAN(insn->chanspec);
-	b_ReadType = (BYTE) CR_RANGE(insn->chanspec);
+	pul_Position1 = (unsigned int *) &data[0];
+/* For Read1 */
+	pul_TurnCpt1 = (unsigned int *) &data[1];
+/* For Read all */
+	pul_Position = (unsigned int *) &data[0];	/* 0-2 */
+	pul_TurnCpt = (unsigned int *) &data[3];	/* 3-5 */
+	b_ModulNbr = (unsigned char) CR_AREF(insn->chanspec);
+	b_SelectedSSI = (unsigned char) CR_CHAN(insn->chanspec);
+	b_ReadType = (unsigned char) CR_RANGE(insn->chanspec);
 
 	/**************************/
 	/* Test the module number */
@@ -477,9 +477,8 @@ INT i_APCI1710_InsnReadSSIValue(struct comedi_device * dev, struct comedi_subdev
 								s_BoardInfos.
 								ui_Address +
 								(64 * b_ModulNbr));
-						}
-						while ((dw_StatusReg & 0x1) !=
-							0);
+						} while ((dw_StatusReg & 0x1)
+							 != 0);
 
 		    /******************************/
 						/* Read the SSI counter value */
@@ -608,8 +607,7 @@ INT i_APCI1710_InsnReadSSIValue(struct comedi_device * dev, struct comedi_subdev
 							s_BoardInfos.
 							ui_Address +
 							(64 * b_ModulNbr));
-					}
-					while ((dw_StatusReg & 0x1) != 0);
+					} while ((dw_StatusReg & 0x1) != 0);
 
 					for (b_SSICpt = 0; b_SSICpt < 3;
 						b_SSICpt++) {
@@ -667,7 +665,7 @@ INT i_APCI1710_InsnReadSSIValue(struct comedi_device * dev, struct comedi_subdev
 				default:
 					printk("Read Type Inputs Wrong\n");
 
-				}	// switch  ending
+				}	/*  switch  ending */
 
 			} else {
 		 /***********************/
@@ -695,16 +693,16 @@ INT i_APCI1710_InsnReadSSIValue(struct comedi_device * dev, struct comedi_subdev
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_   i_APCI1710_ReadSSI1DigitalInput                |
-|                                       (BYTE_     b_BoardHandle,            |
-|                                        BYTE_     b_ModulNbr,               |
-|                                        BYTE_     b_InputChannel,           |
-|                                        PBYTE_   pb_ChannelStatus)          |
+|                                       (unsigned char_     b_BoardHandle,            |
+|                                        unsigned char_     b_ModulNbr,               |
+|                                        unsigned char_     b_InputChannel,           |
+|                                        unsigned char *_   pb_ChannelStatus)          |
 +----------------------------------------------------------------------------+
 | Task              :
 					(0) Set the digital output from selected SSI moule         |
@@ -716,13 +714,13 @@ INT i_APCI1710_InsnReadSSIValue(struct comedi_device * dev, struct comedi_subdev
                     (3)Read the status from all SSI digital inputs from       |
 |                     selected SSI module (b_ModulNbr)                   |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle         : Handle of board APCI-1710|
-|                     BYTE_ b_ModulNbr    CR_AREF        : Module number to         |
+| Input Parameters  : unsigned char_ b_BoardHandle         : Handle of board APCI-1710|
+|                     unsigned char_ b_ModulNbr    CR_AREF        : Module number to         |
 |                                                   configure (0 to 3)       |
-|                     BYTE_ b_InputChannel CR_CHAN       : Selection from digital   |
+|                     unsigned char_ b_InputChannel CR_CHAN       : Selection from digital   |
 |                        data[0] which IOTYPE                           input ( 0 to 2)          |
 +----------------------------------------------------------------------------+
-| Output Parameters : PBYTE_  pb_ChannelStatus    : Digital input channel    |
+| Output Parameters : unsigned char *_  pb_ChannelStatus    : Digital input channel    |
 |                                 data[0]                  status                   |
 |                                                   0 : Channle is not active|
 |                                                   1 : Channle is active    |
@@ -735,19 +733,19 @@ INT i_APCI1710_InsnReadSSIValue(struct comedi_device * dev, struct comedi_subdev
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InsnBitsSSIDigitalIO(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnBitsSSIDigitalIO(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_StatusReg;
-	BYTE b_ModulNbr;
-	BYTE b_InputChannel;
-	PBYTE pb_ChannelStatus;
-	PBYTE pb_InputStatus;
-	BYTE b_IOType;
+	int i_ReturnValue = 0;
+	unsigned int dw_StatusReg;
+	unsigned char b_ModulNbr;
+	unsigned char b_InputChannel;
+	unsigned char *pb_ChannelStatus;
+	unsigned char *pb_InputStatus;
+	unsigned char b_IOType;
 	i_ReturnValue = insn->n;
-	b_ModulNbr = (BYTE) CR_AREF(insn->chanspec);
-	b_IOType = (BYTE) data[0];
+	b_ModulNbr = (unsigned char) CR_AREF(insn->chanspec);
+	b_IOType = (unsigned char) data[0];
 
 	/**************************/
 	/* Test the module number */
@@ -785,8 +783,8 @@ INT i_APCI1710_InsnBitsSSIDigitalIO(struct comedi_device * dev, struct comedi_su
 				/* Test the digital imnput channel number */
 				   /******************************************/
 
-				b_InputChannel = (BYTE) CR_CHAN(insn->chanspec);
-				pb_ChannelStatus = (PBYTE) & data[0];
+				b_InputChannel = (unsigned char) CR_CHAN(insn->chanspec);
+				pb_ChannelStatus = (unsigned char *) &data[0];
 
 				if (b_InputChannel <= 2) {
 					/**************************/
@@ -797,7 +795,7 @@ INT i_APCI1710_InsnBitsSSIDigitalIO(struct comedi_device * dev, struct comedi_su
 						inl(devpriv->s_BoardInfos.
 						ui_Address + (64 * b_ModulNbr));
 					*pb_ChannelStatus =
-						(BYTE) (((~dw_StatusReg) >> (4 +
+						(unsigned char) (((~dw_StatusReg) >> (4 +
 								b_InputChannel))
 						& 1);
 				} else {
@@ -814,19 +812,19 @@ INT i_APCI1710_InsnBitsSSIDigitalIO(struct comedi_device * dev, struct comedi_su
 					/**************************/
 				/* Read all digital input */
 					/**************************/
-				pb_InputStatus = (PBYTE) & data[0];
+				pb_InputStatus = (unsigned char *) &data[0];
 
 				dw_StatusReg =
 					inl(devpriv->s_BoardInfos.ui_Address +
 					(64 * b_ModulNbr));
 				*pb_InputStatus =
-					(BYTE) (((~dw_StatusReg) >> 4) & 7);
+					(unsigned char) (((~dw_StatusReg) >> 4) & 7);
 				break;
 
 			default:
 				printk("IO type wrong\n");
 
-			}	//switch end
+			}	/* switch end */
 		} else {
 	      /**********************************/
 			/* The module is not a SSI module */
@@ -844,5 +842,5 @@ INT i_APCI1710_InsnBitsSSIDigitalIO(struct comedi_device * dev, struct comedi_su
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.h
index 88daad1a391..eb7f101d2d6 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.h
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.h
@@ -33,11 +33,11 @@
 /*
  * SSI INISIALISATION FUNCTION
  */
-INT i_APCI1710_InsnConfigInitSSI(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI1710_InsnConfigInitSSI(struct comedi_device *dev, struct comedi_subdevice *s,
 				 struct comedi_insn *insn, unsigned int *data);
 
-INT i_APCI1710_InsnReadSSIValue(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI1710_InsnReadSSIValue(struct comedi_device *dev, struct comedi_subdevice *s,
 				struct comedi_insn *insn, unsigned int *data);
 
-INT i_APCI1710_InsnBitsSSIDigitalIO(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI1710_InsnBitsSSIDigitalIO(struct comedi_device *dev, struct comedi_subdevice *s,
 				    struct comedi_insn *insn, unsigned int *data);
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.c
index 90316e10a3b..43198aafb2d 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.c
@@ -3,13 +3,13 @@
 
 Copyright (C) 2004,2005  ADDI-DATA GmbH for the source code of this module.
 
-        ADDI-DATA GmbH
-        Dieselstrasse 3
-        D-77833 Ottersweier
-        Tel: +19(0)7223/9493-0
-        Fax: +49(0)7223/9493-92
-        http://www.addi-data-com
-        info@addi-data.com
+	ADDI-DATA GmbH
+	Dieselstrasse 3
+	D-77833 Ottersweier
+	Tel: +19(0)7223/9493-0
+	Fax: +49(0)7223/9493-92
+	http://www.addi-data-com
+	info@addi-data.com
 
 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
 
@@ -63,11 +63,11 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_     i_APCI1710_InitTorCounter                    |
-|                                       (BYTE_     b_BoardHandle,            |
-|                                        BYTE_     b_ModulNbr,               |
-|                                        BYTE_     b_TorCounter,             |
-|                                        BYTE_     b_PCIInputClock,          |
-|                                        BYTE_     b_TimingUnit,             |
+|                                       (unsigned char_     b_BoardHandle,            |
+|                                        unsigned char_     b_ModulNbr,               |
+|                                        unsigned char_     b_TorCounter,             |
+|                                        unsigned char_     b_PCIInputClock,          |
+|                                        unsigned char_     b_TimingUnit,             |
 |                                        ULONG_   ul_TimingInterval,         |
 |                                        PULONG_ pul_RealTimingInterval)     |
 +----------------------------------------------------------------------------+
@@ -82,11 +82,11 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 +----------------------------------------------------------------------------+
 | Input Parameters  :    |
 |
-		CR_AREF	BYTE_   b_ModulNbr       : Module number to configure  |
+		CR_AREF	unsigned char_   b_ModulNbr       : Module number to configure  |
 |                                                (0 to 3)                    |
-|           data[0] BYTE_   b_TorCounter     : Tor counter selection       |
+|           data[0] unsigned char_   b_TorCounter     : Tor counter selection       |
 |                                                (0 or 1).                   |
-|           data[1] BYTE_   b_PCIInputClock  : Selection from PCI bus clock|
+|           data[1] unsigned char_   b_PCIInputClock  : Selection from PCI bus clock|
 |                                                - APCI1710_30MHZ :          |
 |                                                  The PC have a PCI bus     |
 |                                                  clock from 30 MHz         |
@@ -104,7 +104,7 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 |						   than it is not possibl to |
 |						   used the gate input for   |
 |						   enabled the acquisition   |
-|           data[2] BYTE_   b_TimingUnit    : Base timing unit (0 to 4)    |
+|           data[2] unsigned char_   b_TimingUnit    : Base timing unit (0 to 4)    |
 |                                                 0 : ns                     |
 |                                                 1 : µs                     |
 |                                                 2 : ms                     |
@@ -130,27 +130,27 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnConfigInitTorCounter(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = 0;
-	ULONG ul_TimerValue = 0;
-	DWORD dw_Command;
+	int i_ReturnValue = 0;
+	unsigned int ul_TimerValue = 0;
+	unsigned int dw_Command;
 	double d_RealTimingInterval = 0;
-	BYTE b_ModulNbr;
-	BYTE b_TorCounter;
-	BYTE b_PCIInputClock;
-	BYTE b_TimingUnit;
-	ULONG ul_TimingInterval;
-	ULONG ul_RealTimingInterval = 0;
+	unsigned char b_ModulNbr;
+	unsigned char b_TorCounter;
+	unsigned char b_PCIInputClock;
+	unsigned char b_TimingUnit;
+	unsigned int ul_TimingInterval;
+	unsigned int ul_RealTimingInterval = 0;
 
 	i_ReturnValue = insn->n;
-	b_ModulNbr = (BYTE) CR_AREF(insn->chanspec);
+	b_ModulNbr = (unsigned char) CR_AREF(insn->chanspec);
 
-	b_TorCounter = (BYTE) data[0];
-	b_PCIInputClock = (BYTE) data[1];
-	b_TimingUnit = (BYTE) data[2];
-	ul_TimingInterval = (ULONG) data[3];
+	b_TorCounter = (unsigned char) data[0];
+	b_PCIInputClock = (unsigned char) data[1];
+	b_TimingUnit = (unsigned char) data[2];
+	ul_TimingInterval = (unsigned int) data[3];
 	printk("INPUT clock %d\n", b_PCIInputClock);
 
 		/**************************/
@@ -225,7 +225,7 @@ INT i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
 
 											ul_TimerValue
 												=
-												(ULONG)
+												(unsigned int)
 												(ul_TimingInterval
 												*
 												(0.00025 * b_PCIInputClock));
@@ -248,7 +248,7 @@ INT i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
 
 											ul_RealTimingInterval
 												=
-												(ULONG)
+												(unsigned int)
 												(ul_TimerValue
 												/
 												(0.00025 * (double)b_PCIInputClock));
@@ -284,7 +284,7 @@ INT i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
 											if (b_PCIInputClock != APCI1710_40MHZ) {
 												ul_TimerValue
 													=
-													(ULONG)
+													(unsigned int)
 													(
 													(double)
 													(ul_TimerValue)
@@ -306,7 +306,7 @@ INT i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
 
 											ul_TimerValue
 												=
-												(ULONG)
+												(unsigned int)
 												(ul_TimingInterval
 												*
 												(0.25 * b_PCIInputClock));
@@ -329,7 +329,7 @@ INT i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
 
 											ul_RealTimingInterval
 												=
-												(ULONG)
+												(unsigned int)
 												(ul_TimerValue
 												/
 												(0.25 * (double)b_PCIInputClock));
@@ -367,7 +367,7 @@ INT i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
 											if (b_PCIInputClock != APCI1710_40MHZ) {
 												ul_TimerValue
 													=
-													(ULONG)
+													(unsigned int)
 													(
 													(double)
 													(ul_TimerValue)
@@ -413,7 +413,7 @@ INT i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
 
 											ul_RealTimingInterval
 												=
-												(ULONG)
+												(unsigned int)
 												(ul_TimerValue
 												/
 												(250.0 * (double)b_PCIInputClock));
@@ -449,7 +449,7 @@ INT i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
 											if (b_PCIInputClock != APCI1710_40MHZ) {
 												ul_TimerValue
 													=
-													(ULONG)
+													(unsigned int)
 													(
 													(double)
 													(ul_TimerValue)
@@ -471,7 +471,7 @@ INT i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
 
 											ul_TimerValue
 												=
-												(ULONG)
+												(unsigned int)
 												(ul_TimingInterval
 												*
 												(250000.0
@@ -496,7 +496,7 @@ INT i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
 
 											ul_RealTimingInterval
 												=
-												(ULONG)
+												(unsigned int)
 												(ul_TimerValue
 												/
 												(250000.0
@@ -535,7 +535,7 @@ INT i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
 											if (b_PCIInputClock != APCI1710_40MHZ) {
 												ul_TimerValue
 													=
-													(ULONG)
+													(unsigned int)
 													(
 													(double)
 													(ul_TimerValue)
@@ -557,7 +557,7 @@ INT i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
 
 											ul_TimerValue
 												=
-												(ULONG)
+												(unsigned int)
 												(
 												(ul_TimingInterval
 													*
@@ -585,7 +585,7 @@ INT i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
 
 											ul_RealTimingInterval
 												=
-												(ULONG)
+												(unsigned int)
 												(ul_TimerValue
 												/
 												(250000.0
@@ -629,7 +629,7 @@ INT i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
 											if (b_PCIInputClock != APCI1710_40MHZ) {
 												ul_TimerValue
 													=
-													(ULONG)
+													(unsigned int)
 													(
 													(double)
 													(ul_TimerValue)
@@ -641,7 +641,7 @@ INT i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
 										}
 
 										fpu_end();
-									}	// if (b_PCIInputClock != APCI1710_GATE_INPUT)
+									}	/*  if (b_PCIInputClock != APCI1710_GATE_INPUT) */
 									else {
 				   /*************************************************************/
 										/* 2 Clock used for the overflow and the reload from counter */
@@ -652,7 +652,7 @@ INT i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
 											ul_TimingInterval
 											-
 											2;
-									}	// if (b_PCIInputClock != APCI1710_GATE_INPUT)
+									}	/*  if (b_PCIInputClock != APCI1710_GATE_INPUT) */
 
 				/****************************/
 									/* Save the PCI input clock */
@@ -814,7 +814,7 @@ INT i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
 							DPRINTK("Base timing selection is wrong\n");
 							i_ReturnValue = -7;
 						}
-					}	// if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4))
+					}	/*  if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) */
 					else {
 		       /**********************************/
 						/* Timing unit selection is wrong */
@@ -822,8 +822,8 @@ INT i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
 
 						DPRINTK("Timing unit selection is wrong\n");
 						i_ReturnValue = -6;
-					}	// if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4))
-				}	// if ((b_PCIInputClock == APCI1710_30MHZ) || (b_PCIInputClock == APCI1710_33MHZ))
+					}	/*  if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) */
+				}	/*  if ((b_PCIInputClock == APCI1710_30MHZ) || (b_PCIInputClock == APCI1710_33MHZ)) */
 				else {
 		    /*****************************************/
 					/* The selected PCI input clock is wrong */
@@ -831,8 +831,8 @@ INT i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
 
 					DPRINTK("The selected PCI input clock is wrong\n");
 					i_ReturnValue = -5;
-				}	// if ((b_PCIInputClock == APCI1710_30MHZ) || (b_PCIInputClock == APCI1710_33MHZ))
-			}	// if (b_TorCounterMode >= 0 && b_TorCounterMode <= 7)
+				}	/*  if ((b_PCIInputClock == APCI1710_30MHZ) || (b_PCIInputClock == APCI1710_33MHZ)) */
+			}	/*  if (b_TorCounterMode >= 0 && b_TorCounterMode <= 7) */
 			else {
 		 /**********************************/
 				/* Tor Counter selection is wrong */
@@ -840,7 +840,7 @@ INT i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
 
 				DPRINTK("Tor Counter selection is wrong\n");
 				i_ReturnValue = -4;
-			}	// if (b_TorCounterMode >= 0 && b_TorCounterMode <= 7)
+			}	/*  if (b_TorCounterMode >= 0 && b_TorCounterMode <= 7) */
 		} else {
 	      /******************************************/
 			/* The module is not a tor counter module */
@@ -857,20 +857,20 @@ INT i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
 		DPRINTK("Module number error\n");
 		i_ReturnValue = -2;
 	}
-	data[0] = (UINT) ul_RealTimingInterval;
-	return (i_ReturnValue);
+	data[0] = (unsigned int) ul_RealTimingInterval;
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_EnableTorCounter                      |
-|                                               (BYTE_ b_BoardHandle,        |
-|                                                BYTE_ b_ModulNbr,           |
-|						 BYTE_ b_TorCounter,         |
-|						 BYTE_ b_InputMode,          |
-|						 BYTE_ b_ExternGate,         |
-|                                                BYTE_ b_CycleMode,          |
-|                                                BYTE_ b_InterruptEnable)    |
+|                                               (unsigned char_ b_BoardHandle,        |
+|                                                unsigned char_ b_ModulNbr,           |
+|						 unsigned char_ b_TorCounter,         |
+|						 unsigned char_ b_InputMode,          |
+|						 unsigned char_ b_ExternGate,         |
+|                                                unsigned char_ b_CycleMode,          |
+|                                                unsigned char_ b_InterruptEnable)    |
 +----------------------------------------------------------------------------+
 | Task              : Enable the tor counter (b_TorCounter) from selected    |
 |		      module (b_ModulNbr). You must calling the              |
@@ -883,13 +883,13 @@ INT i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
 |                     The b_CycleMode parameter determine if you will        |
 |                     measured a single or more cycle.                       |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle  : Handle of board APCI-1710       |
-|                     BYTE_ b_ModulNbr     : Selected module number (0 to 3) |
-|                     BYTE_ b_TorCounter   : Tor counter selection (0 or 1). |
-|		      BYTE_ b_InputMode    : Input signal level selection    |
+| Input Parameters  : unsigned char_ b_BoardHandle  : Handle of board APCI-1710       |
+|                     unsigned char_ b_ModulNbr     : Selected module number (0 to 3) |
+|                     unsigned char_ b_TorCounter   : Tor counter selection (0 or 1). |
+|		      unsigned char_ b_InputMode    : Input signal level selection    |
 |						0 : Tor count each low level |
 |						1 : Tor count each high level|
-|		      BYTE_ b_ExternGate   : Extern gate action selection    |
+|		      unsigned char_ b_ExternGate   : Extern gate action selection    |
 |						0 : Extern gate signal not   |
 |						    used                     |
 |						1 : Extern gate signal used. |
@@ -928,9 +928,9 @@ INT i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
 |					      The gate input is used for the |
 |					      signal B                       |
 |									     |
-|                     BYTE_ b_CycleMode    : Selected the tor counter        |
+|                     unsigned char_ b_CycleMode    : Selected the tor counter        |
 |                                            acquisition mode                |
-|                     BYTE_ b_InterruptEnable : Enable or disable the        |
+|                     unsigned char_ b_InterruptEnable : Enable or disable the        |
 |                                               tor counter interrupt.       |
 |                                               APCI1710_ENABLE:             |
 |                                               Enable the tor counter       |
@@ -959,9 +959,9 @@ INT i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_DisableTorCounter                     |
-|                                               (BYTE_  b_BoardHandle,       |
-|                                                BYTE_  b_ModulNbr,          |
-|						 BYTE_  b_TorCounter)        |
+|                                               (unsigned char_  b_BoardHandle,       |
+|                                                unsigned char_  b_ModulNbr,          |
+|						 unsigned char_  b_TorCounter)        |
 +----------------------------------------------------------------------------+
 | Task              : Disable the tor counter (b_TorCounter) from selected   |
 |		      module (b_ModulNbr). If you disable the tor counter    |
@@ -969,9 +969,9 @@ INT i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
 |		      counter witch the " i_APCI1710_EnableTorCounter"       |
 |		      function, the status register is cleared               |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle  : Handle of board APCI-1710       |
-|                     BYTE_ b_ModulNbr     : Selected module number (0 to 3) |
-|                     BYTE_ b_TorCounter   : Tor counter selection (0 or 1). |
+| Input Parameters  : unsigned char_ b_BoardHandle  : Handle of board APCI-1710       |
+|                     unsigned char_ b_ModulNbr     : Selected module number (0 to 3) |
+|                     unsigned char_ b_TorCounter   : Tor counter selection (0 or 1). |
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
 +----------------------------------------------------------------------------+
@@ -987,29 +987,29 @@ INT i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InsnWriteEnableDisableTorCounter(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnWriteEnableDisableTorCounter(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_Status;
-	DWORD dw_DummyRead;
-	DWORD dw_ConfigReg;
-	BYTE b_ModulNbr, b_Action;
-	BYTE b_TorCounter;
-	BYTE b_InputMode;
-	BYTE b_ExternGate;
-	BYTE b_CycleMode;
-	BYTE b_InterruptEnable;
-
-	b_ModulNbr = (BYTE) CR_AREF(insn->chanspec);
-	b_Action = (BYTE) data[0];	// enable or disable
-	b_TorCounter = (BYTE) data[1];
-	b_InputMode = (BYTE) data[2];
-	b_ExternGate = (BYTE) data[3];
-	b_CycleMode = (BYTE) data[4];
-	b_InterruptEnable = (BYTE) data[5];
+	int i_ReturnValue = 0;
+	unsigned int dw_Status;
+	unsigned int dw_DummyRead;
+	unsigned int dw_ConfigReg;
+	unsigned char b_ModulNbr, b_Action;
+	unsigned char b_TorCounter;
+	unsigned char b_InputMode;
+	unsigned char b_ExternGate;
+	unsigned char b_CycleMode;
+	unsigned char b_InterruptEnable;
+
+	b_ModulNbr = (unsigned char) CR_AREF(insn->chanspec);
+	b_Action = (unsigned char) data[0];	/*  enable or disable */
+	b_TorCounter = (unsigned char) data[1];
+	b_InputMode = (unsigned char) data[2];
+	b_ExternGate = (unsigned char) data[3];
+	b_CycleMode = (unsigned char) data[4];
+	b_InterruptEnable = (unsigned char) data[5];
 	i_ReturnValue = insn->n;;
-	devpriv->tsk_Current = current;	// Save the current process task structure
+	devpriv->tsk_Current = current;	/*  Save the current process task structure */
 	/**************************/
 	/* Test the module number */
 	/**************************/
@@ -1027,7 +1027,7 @@ INT i_APCI1710_InsnWriteEnableDisableTorCounter(struct comedi_device * dev,
 	      /**********************************/
 
 			if (b_TorCounter <= 1) {
-				switch (b_Action)	// Enable or Disable
+				switch (b_Action)	/*  Enable or Disable */
 				{
 				case APCI1710_ENABLE:
 		 /***********************************/
@@ -1149,7 +1149,7 @@ INT i_APCI1710_InsnWriteEnableDisableTorCounter(struct comedi_device * dev,
 													|
 													0x780;
 
-											}	// if (b_InputMode == APCI1710_TOR_SIMPLE_MODE)
+											}	/*  if (b_InputMode == APCI1710_TOR_SIMPLE_MODE) */
 
 				      /***********************/
 											/* Test if double mode */
@@ -1166,12 +1166,12 @@ INT i_APCI1710_InsnWriteEnableDisableTorCounter(struct comedi_device * dev,
 													|
 													0x180;
 
-											}	// if (b_InputMode == APCI1710_TOR_DOUBLE_MODE)
+											}	/*  if (b_InputMode == APCI1710_TOR_DOUBLE_MODE) */
 
 											b_InputMode
 												=
 												0;
-										}	// if (b_InputMode > 1)
+										}	/*  if (b_InputMode > 1) */
 
 				   /*******************/
 										/* Set the command */
@@ -1237,7 +1237,7 @@ INT i_APCI1710_InsnWriteEnableDisableTorCounter(struct comedi_device * dev,
 
 										outl(1, devpriv->s_BoardInfos.ui_Address + 8 + (16 * b_TorCounter) + (64 * b_ModulNbr));
 
-									}	// if ((b_InterruptEnable == APCI1710_ENABLE) || (b_InterruptEnable == APCI1710_DISABLE))
+									}	/*  if ((b_InterruptEnable == APCI1710_ENABLE) || (b_InterruptEnable == APCI1710_DISABLE)) */
 									else {
 				/********************************/
 										/* Interrupt parameter is wrong */
@@ -1247,8 +1247,8 @@ INT i_APCI1710_InsnWriteEnableDisableTorCounter(struct comedi_device * dev,
 										i_ReturnValue
 											=
 											-9;
-									}	// if ((b_InterruptEnable == APCI1710_ENABLE) || (b_InterruptEnable == APCI1710_DISABLE))
-								}	// if ((b_CycleMode == APCI1710_SINGLE) || (b_CycleMode == APCI1710_CONTINUOUS))
+									}	/*  if ((b_InterruptEnable == APCI1710_ENABLE) || (b_InterruptEnable == APCI1710_DISABLE)) */
+								}	/*  if ((b_CycleMode == APCI1710_SINGLE) || (b_CycleMode == APCI1710_CONTINUOUS)) */
 								else {
 			     /***********************************************/
 									/* Tor counter acquisition mode cycle is wrong */
@@ -1258,8 +1258,8 @@ INT i_APCI1710_InsnWriteEnableDisableTorCounter(struct comedi_device * dev,
 									i_ReturnValue
 										=
 										-8;
-								}	// if ((b_CycleMode == APCI1710_SINGLE) || (b_CycleMode == APCI1710_CONTINUOUS))
-							}	// if (b_ExternGate >= 0 && b_ExternGate <= 1)
+								}	/*  if ((b_CycleMode == APCI1710_SINGLE) || (b_CycleMode == APCI1710_CONTINUOUS)) */
+							}	/*  if (b_ExternGate >= 0 && b_ExternGate <= 1) */
 							else {
 			  /***********************************/
 								/* Extern gate input mode is wrong */
@@ -1268,8 +1268,8 @@ INT i_APCI1710_InsnWriteEnableDisableTorCounter(struct comedi_device * dev,
 								DPRINTK("Extern gate input mode is wrong\n");
 								i_ReturnValue =
 									-7;
-							}	// if (b_ExternGate >= 0 && b_ExternGate <= 1)
-						}	// if (b_InputMode >= 0 && b_InputMode <= 1)
+							}	/*  if (b_ExternGate >= 0 && b_ExternGate <= 1) */
+						}	/*  if (b_InputMode >= 0 && b_InputMode <= 1) */
 						else {
 		       /***************************************/
 							/* Tor input signal selection is wrong */
@@ -1329,7 +1329,7 @@ INT i_APCI1710_InsnWriteEnableDisableTorCounter(struct comedi_device * dev,
 								s_BoardInfos.
 								ui_Address + 8 +
 								(16 * b_TorCounter) + (64 * b_ModulNbr));
-						}	// if (dw_Status & 0x1)
+						}	/*  if (dw_Status & 0x1) */
 						else {
 		       /***************************/
 							/* Tor counter not enabled */
@@ -1337,8 +1337,8 @@ INT i_APCI1710_InsnWriteEnableDisableTorCounter(struct comedi_device * dev,
 
 							DPRINTK("Tor counter not enabled \n");
 							i_ReturnValue = -6;
-						}	// if (dw_Status & 0x1)
-					}	// if (dw_Status & 0x10)
+						}	/*  if (dw_Status & 0x1) */
+					}	/*  if (dw_Status & 0x10) */
 					else {
 		    /*******************************/
 						/* Tor counter not initialised */
@@ -1346,10 +1346,10 @@ INT i_APCI1710_InsnWriteEnableDisableTorCounter(struct comedi_device * dev,
 
 						DPRINTK("Tor counter not initialised\n");
 						i_ReturnValue = -5;
-					}	// // if (dw_Status & 0x10)
+					}	/*  // if (dw_Status & 0x10) */
 
-				}	// switch
-			}	// if (b_TorCounter <= 1)
+				}	/*  switch */
+			}	/*  if (b_TorCounter <= 1) */
 			else {
 		 /**********************************/
 				/* Tor counter selection is wrong */
@@ -1357,7 +1357,7 @@ INT i_APCI1710_InsnWriteEnableDisableTorCounter(struct comedi_device * dev,
 
 				DPRINTK("Tor counter selection is wrong\n");
 				i_ReturnValue = -4;
-			}	// if (b_TorCounter <= 1)
+			}	/*  if (b_TorCounter <= 1) */
 		} else {
 	      /******************************************/
 			/* The module is not a tor counter module */
@@ -1375,22 +1375,22 @@ INT i_APCI1710_InsnWriteEnableDisableTorCounter(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_GetTorCounterInitialisation           |
-|                                               (BYTE_     b_BoardHandle,    |
-|                                                BYTE_     b_ModulNbr,       |
-|						 BYTE_     b_TorCounter,     |
-|                                        	 PBYTE_   pb_TimingUnit,     |
+|                                               (unsigned char_     b_BoardHandle,    |
+|                                                unsigned char_     b_ModulNbr,       |
+|						 unsigned char_     b_TorCounter,     |
+|                                        	 unsigned char *_   pb_TimingUnit,     |
 |                                        	 PULONG_ pul_TimingInterval, |
-|						 PBYTE_   pb_InputMode,      |
-|						 PBYTE_   pb_ExternGate,     |
-|                                                PBYTE_   pb_CycleMode,      |
-|						 PBYTE_   pb_Enable,         |
-|                                                PBYTE_   pb_InterruptEnable)|
+|						 unsigned char *_   pb_InputMode,      |
+|						 unsigned char *_   pb_ExternGate,     |
+|                                                unsigned char *_   pb_CycleMode,      |
+|						 unsigned char *_   pb_Enable,         |
+|                                                unsigned char *_   pb_InterruptEnable)|
 +----------------------------------------------------------------------------+
 | Task              : Enable the tor counter (b_TorCounter) from selected    |
 |		      module (b_ModulNbr). You must calling the              |
@@ -1403,37 +1403,37 @@ INT i_APCI1710_InsnWriteEnableDisableTorCounter(struct comedi_device * dev,
 |                     The b_CycleMode parameter determine if you will        |
 |                     measured a single or more cycle.                       |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle  : Handle of board APCI-1710       |
-|                     BYTE_ b_ModulNbr     : Selected module number (0 to 3) |
-|                     BYTE_ b_TorCounter   : Tor counter selection (0 or 1)
+| Input Parameters  : unsigned char_ b_BoardHandle  : Handle of board APCI-1710       |
+|                     unsigned char_ b_ModulNbr     : Selected module number (0 to 3) |
+|                     unsigned char_ b_TorCounter   : Tor counter selection (0 or 1)
 
 	b_ModulNbr			=	CR_AREF(insn->chanspec);
 	b_TorCounter		=	CR_CHAN(insn->chanspec);
 . |
 +----------------------------------------------------------------------------+
-| Output Parameters : PBYTE_  pb_TimingUnit    : Base timing unit (0 to 4)   |
+| Output Parameters : unsigned char *_  pb_TimingUnit    : Base timing unit (0 to 4)   |
 |                                                 0 : ns                     |
 |                                                 1 : µs                     |
 |                                                 2 : ms                     |
 |                                                 3 : s                      |
 |                                                 4 : mn                     |
 |                     PULONG_ pul_TimingInterval : Base timing value.        |
-|		      PBYTE_ pb_InputMode        : Input signal level        |
+|		      unsigned char *_ pb_InputMode        : Input signal level        |
 |						   selection  		     |
 |						0 : Tor count each low level |
 |						1 : Tor count each high level|
-|		      PBYTE_ pb_ExternGate	: Extern gate action         |
+|		      unsigned char *_ pb_ExternGate	: Extern gate action         |
 |						  selection                  |
 |						  0 : Extern gate signal not |
 |						      used                   |
 |						  1 : Extern gate signal used|
-|                     PBYTE_ pb_CycleMode       : Tor counter acquisition    |
+|                     unsigned char *_ pb_CycleMode       : Tor counter acquisition    |
 |						  mode           	     |
-|		      PBYTE_ pb_Enable		: Indicate if the tor counter|
+|		      unsigned char *_ pb_Enable		: Indicate if the tor counter|
 |						  is enabled or no           |
 |						  0 : Tor counter disabled   |
 |						  1 : Tor counter enabled    |
-|                     PBYTE_ pb_InterruptEnable : Enable or disable the      |
+|                     unsigned char *_ pb_InterruptEnable : Enable or disable the      |
 |                                                 tor counter interrupt.     |
 |                                                 APCI1710_ENABLE:           |
 |                                                 Enable the tor counter     |
@@ -1441,13 +1441,13 @@ INT i_APCI1710_InsnWriteEnableDisableTorCounter(struct comedi_device * dev,
 |                                                 APCI1710_DISABLE:          |
 |                                                 Disable the tor counter    |
 |                                                 interrupt
-	pb_TimingUnit		=	(PBYTE) &data[0];
-	pul_TimingInterval	=  (PULONG) &data[1];
-	pb_InputMode		=	(PBYTE) &data[2];
-	pb_ExternGate		=	(PBYTE) &data[3];
-	pb_CycleMode		=	(PBYTE) &data[4];
-	pb_Enable			=	(PBYTE) &data[5];
-	pb_InterruptEnable	=	(PBYTE) &data[6];
+	pb_TimingUnit		=	(unsigned char *) &data[0];
+	pul_TimingInterval	=  (unsigned int *) &data[1];
+	pb_InputMode		=	(unsigned char *) &data[2];
+	pb_ExternGate		=	(unsigned char *) &data[3];
+	pb_CycleMode		=	(unsigned char *) &data[4];
+	pb_Enable			=	(unsigned char *) &data[5];
+	pb_InterruptEnable	=	(unsigned char *) &data[6];
                  |
 +----------------------------------------------------------------------------+
 | Return Value      :  0: No error                                           |
@@ -1460,32 +1460,32 @@ INT i_APCI1710_InsnWriteEnableDisableTorCounter(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InsnReadGetTorCounterInitialisation(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnReadGetTorCounterInitialisation(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_Status;
-	BYTE b_ModulNbr;
-	BYTE b_TorCounter;
-	PBYTE pb_TimingUnit;
-	PULONG pul_TimingInterval;
-	PBYTE pb_InputMode;
-	PBYTE pb_ExternGate;
-	PBYTE pb_CycleMode;
-	PBYTE pb_Enable;
-	PBYTE pb_InterruptEnable;
+	int i_ReturnValue = 0;
+	unsigned int dw_Status;
+	unsigned char b_ModulNbr;
+	unsigned char b_TorCounter;
+	unsigned char *pb_TimingUnit;
+	unsigned int *pul_TimingInterval;
+	unsigned char *pb_InputMode;
+	unsigned char *pb_ExternGate;
+	unsigned char *pb_CycleMode;
+	unsigned char *pb_Enable;
+	unsigned char *pb_InterruptEnable;
 
 	i_ReturnValue = insn->n;
 	b_ModulNbr = CR_AREF(insn->chanspec);
 	b_TorCounter = CR_CHAN(insn->chanspec);
 
-	pb_TimingUnit = (PBYTE) & data[0];
-	pul_TimingInterval = (PULONG) & data[1];
-	pb_InputMode = (PBYTE) & data[2];
-	pb_ExternGate = (PBYTE) & data[3];
-	pb_CycleMode = (PBYTE) & data[4];
-	pb_Enable = (PBYTE) & data[5];
-	pb_InterruptEnable = (PBYTE) & data[6];
+	pb_TimingUnit = (unsigned char *) &data[0];
+	pul_TimingInterval = (unsigned int *) &data[1];
+	pb_InputMode = (unsigned char *) &data[2];
+	pb_ExternGate = (unsigned char *) &data[3];
+	pb_CycleMode = (unsigned char *) &data[4];
+	pb_Enable = (unsigned char *) &data[5];
+	pb_InterruptEnable = (unsigned char *) &data[6];
 
 	/**************************/
 	/* Test the module number */
@@ -1526,9 +1526,9 @@ INT i_APCI1710_InsnReadGetTorCounterInitialisation(struct comedi_device * dev,
 						(64 * b_ModulNbr));
 
 					*pb_CycleMode =
-						(BYTE) ((dw_Status >> 4) & 1);
+						(unsigned char) ((dw_Status >> 4) & 1);
 					*pb_InterruptEnable =
-						(BYTE) ((dw_Status >> 5) & 1);
+						(unsigned char) ((dw_Status >> 5) & 1);
 
 		    /******************************************************/
 					/* Test if extern gate used for clock or for signal B */
@@ -1569,25 +1569,25 @@ INT i_APCI1710_InsnReadGetTorCounterInitialisation(struct comedi_device * dev,
 								*pb_InputMode =
 									APCI1710_TOR_QUADRUPLE_MODE;
 							}
-						}	// if (dw_Status & 0x400)
+						}	/*  if (dw_Status & 0x400) */
 						else {
 							*pb_InputMode = 1;
-						}	// // if (dw_Status & 0x400)
+						}	/*  // if (dw_Status & 0x400) */
 
 		       /************************/
 						/* Extern gate not used */
 		       /************************/
 
 						*pb_ExternGate = 0;
-					}	// if (dw_Status & 0x600)
+					}	/*  if (dw_Status & 0x600) */
 					else {
 						*pb_InputMode =
-							(BYTE) ((dw_Status >> 6)
+							(unsigned char) ((dw_Status >> 6)
 							& 1);
 						*pb_ExternGate =
-							(BYTE) ((dw_Status >> 7)
+							(unsigned char) ((dw_Status >> 7)
 							& 1);
-					}	// if (dw_Status & 0x600)
+					}	/*  if (dw_Status & 0x600) */
 
 					*pb_TimingUnit =
 						devpriv->
@@ -1611,7 +1611,7 @@ INT i_APCI1710_InsnReadGetTorCounterInitialisation(struct comedi_device * dev,
 					i_ReturnValue = -5;
 				}
 
-			}	// if (b_TorCounter <= 1)
+			}	/*  if (b_TorCounter <= 1) */
 			else {
 		 /**********************************/
 				/* Tor counter selection is wrong */
@@ -1619,7 +1619,7 @@ INT i_APCI1710_InsnReadGetTorCounterInitialisation(struct comedi_device * dev,
 
 				DPRINTK("Tor counter selection is wrong \n");
 				i_ReturnValue = -4;
-			}	// if (b_TorCounter <= 1)
+			}	/*  if (b_TorCounter <= 1) */
 		} else {
 	      /******************************************/
 			/* The module is not a tor counter module */
@@ -1637,17 +1637,17 @@ INT i_APCI1710_InsnReadGetTorCounterInitialisation(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_ReadTorCounterValue                   |
-|                               (BYTE_     b_BoardHandle,                    |
-|                                BYTE_     b_ModulNbr,                       |
-|				 BYTE_     b_TorCounter,                     |
-|                                UINT_    ui_TimeOut,                        |
-|                                PBYTE_   pb_TorCounterStatus,               |
+|                               (unsigned char_     b_BoardHandle,                    |
+|                                unsigned char_     b_ModulNbr,                       |
+|				 unsigned char_     b_TorCounter,                     |
+|                                unsigned int_    ui_TimeOut,                        |
+|                                unsigned char *_   pb_TorCounterStatus,               |
 |                                PULONG_ pul_TorCounterValue)                |
 +----------------------------------------------------------------------------+
 | Task        	case APCI1710_TOR_GETPROGRESSSTATUS: Return the tor counter
@@ -1660,15 +1660,15 @@ INT i_APCI1710_InsnReadGetTorCounterInitialisation(struct comedi_device * dev,
 |		      (pul_TorCounterValue) after a conting cycle stop       |
 |                     from selected tor counter module (b_ModulNbr).         |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle  : Handle of board APCI-1710       |
-|                     BYTE_ b_ModulNbr     : Selected module number (0 to 3) |
-|                     BYTE_ b_TorCounter   : Tor counter selection (0 or 1).
+| Input Parameters  : unsigned char_ b_BoardHandle  : Handle of board APCI-1710       |
+|                     unsigned char_ b_ModulNbr     : Selected module number (0 to 3) |
+|                     unsigned char_ b_TorCounter   : Tor counter selection (0 or 1).
 	b_ModulNbr    = CR_AREF(insn->chanspec);
-	b_ReadType    = (BYTE) data[0];
-	b_TorCounter  =	(BYTE) data[1];
-	ui_TimeOut	  = (UINT) data[2]; |
+	b_ReadType    = (unsigned char) data[0];
+	b_TorCounter  =	(unsigned char) data[1];
+	ui_TimeOut	  = (unsigned int) data[2]; |
 +----------------------------------------------------------------------------+
-| Output Parameters : PBYTE_  pb_TorCounterStatus : Return the tor counter   |
+| Output Parameters : unsigned char *_  pb_TorCounterStatus : Return the tor counter   |
 |                                                    status.                 |
 |                                               0 : Conting cycle not started|
 |                                                   Software gate not set.   |
@@ -1683,9 +1683,9 @@ INT i_APCI1710_InsnReadGetTorCounterInitialisation(struct comedi_device * dev,
 |                                                   function                 |
 |                                                 "i_APCI1710_InitTorCounter"|
 |						4 : Timeeout occur           |
-|                     PULONG  pul_TorCounterValue  : Tor counter value.
-	pb_TorCounterStatus=(PBYTE) &data[0];
-	pul_TorCounterValue=(PULONG) &data[1];    |
+|                     unsigned int *  pul_TorCounterValue  : Tor counter value.
+	pb_TorCounterStatus=(unsigned char *) &data[0];
+	pul_TorCounterValue=(unsigned int *) &data[1];    |
 +----------------------------------------------------------------------------+
 | Return Value      :  0: No error                                           |
 |                     -1: The handle parameter of the board is wrong         |
@@ -1700,27 +1700,27 @@ INT i_APCI1710_InsnReadGetTorCounterInitialisation(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InsnBitsGetTorCounterProgressStatusAndValue(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnBitsGetTorCounterProgressStatusAndValue(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_Status;
-	DWORD dw_TimeOut = 0;
+	int i_ReturnValue = 0;
+	unsigned int dw_Status;
+	unsigned int dw_TimeOut = 0;
 
-	BYTE b_ModulNbr;
-	BYTE b_TorCounter;
-	BYTE b_ReadType;
-	UINT ui_TimeOut;
-	PBYTE pb_TorCounterStatus;
-	PULONG pul_TorCounterValue;
+	unsigned char b_ModulNbr;
+	unsigned char b_TorCounter;
+	unsigned char b_ReadType;
+	unsigned int ui_TimeOut;
+	unsigned char *pb_TorCounterStatus;
+	unsigned int *pul_TorCounterValue;
 
 	i_ReturnValue = insn->n;
 	b_ModulNbr = CR_AREF(insn->chanspec);
-	b_ReadType = (BYTE) data[0];
-	b_TorCounter = (BYTE) data[1];
-	ui_TimeOut = (UINT) data[2];
-	pb_TorCounterStatus = (PBYTE) & data[0];
-	pul_TorCounterValue = (PULONG) & data[1];
+	b_ReadType = (unsigned char) data[0];
+	b_TorCounter = (unsigned char) data[1];
+	ui_TimeOut = (unsigned int) data[2];
+	pb_TorCounterStatus = (unsigned char *) &data[0];
+	pul_TorCounterValue = (unsigned int *) &data[1];
 
 	/**************************/
 	/* Test the module number */
@@ -1896,7 +1896,7 @@ INT i_APCI1710_InsnBitsGetTorCounterProgressStatusAndValue(struct comedi_device
 											+
 											(16 * b_TorCounter) + (64 * b_ModulNbr));
 										break;
-									}	// if ((dw_Status & 4) == 4)
+									}	/*  if ((dw_Status & 4) == 4) */
 									else {
 				/*******************************/
 										/* Test if measurement stopped */
@@ -1927,7 +1927,7 @@ INT i_APCI1710_InsnBitsGetTorCounterProgressStatusAndValue(struct comedi_device
 												(16 * b_TorCounter) + (64 * b_ModulNbr));
 
 											break;
-										}	// if ((dw_Status & 2) == 2)
+										}	/*  if ((dw_Status & 2) == 2) */
 										else {
 				   /*******************************/
 											/* Test if measurement started */
@@ -1941,7 +1941,7 @@ INT i_APCI1710_InsnBitsGetTorCounterProgressStatusAndValue(struct comedi_device
 												*pb_TorCounterStatus
 													=
 													1;
-											}	// if ((dw_Status & 1) == 1)
+											}	/*  if ((dw_Status & 1) == 1) */
 											else {
 				      /***************************/
 												/* Measurement not started */
@@ -1950,9 +1950,9 @@ INT i_APCI1710_InsnBitsGetTorCounterProgressStatusAndValue(struct comedi_device
 												*pb_TorCounterStatus
 													=
 													0;
-											}	// if ((dw_Status & 1) == 1)
-										}	// if ((dw_Status & 2) == 2)
-									}	// if ((dw_Status & 8) == 8)
+											}	/*  if ((dw_Status & 1) == 1) */
+										}	/*  if ((dw_Status & 2) == 2) */
+									}	/*  if ((dw_Status & 8) == 8) */
 
 									if (dw_TimeOut == ui_TimeOut) {
 				/*****************/
@@ -1973,7 +1973,7 @@ INT i_APCI1710_InsnBitsGetTorCounterProgressStatusAndValue(struct comedi_device
 
 										mdelay(1000);
 									}
-								}	// for (;;)
+								}	/*  for (;;) */
 
 			  /*************************/
 								/* Test if timeout occur */
@@ -2001,8 +2001,8 @@ INT i_APCI1710_InsnBitsGetTorCounterProgressStatusAndValue(struct comedi_device
 
 						default:
 							printk("Inputs wrong\n");
-						}	// switch end
-					}	// if (dw_Status & 0x1)
+						}	/*  switch end */
+					}	/*  if (dw_Status & 0x1) */
 					else {
 		       /***************************/
 						/* Tor counter not enabled */
@@ -2010,7 +2010,7 @@ INT i_APCI1710_InsnBitsGetTorCounterProgressStatusAndValue(struct comedi_device
 
 						DPRINTK("Tor counter not enabled\n");
 						i_ReturnValue = -6;
-					}	// if (dw_Status & 0x1)
+					}	/*  if (dw_Status & 0x1) */
 				} else {
 		    /*******************************/
 					/* Tor counter not initialised */
@@ -2019,7 +2019,7 @@ INT i_APCI1710_InsnBitsGetTorCounterProgressStatusAndValue(struct comedi_device
 					DPRINTK("Tor counter not initialised\n");
 					i_ReturnValue = -5;
 				}
-			}	// if (b_TorCounter <= 1)
+			}	/*  if (b_TorCounter <= 1) */
 			else {
 		 /**********************************/
 				/* Tor counter selection is wrong */
@@ -2027,7 +2027,7 @@ INT i_APCI1710_InsnBitsGetTorCounterProgressStatusAndValue(struct comedi_device
 
 				DPRINTK("Tor counter selection is wrong\n");
 				i_ReturnValue = -4;
-			}	// if (b_TorCounter <= 1)
+			}	/*  if (b_TorCounter <= 1) */
 		} else {
 	      /******************************************/
 			/* The module is not a tor counter module */
@@ -2045,5 +2045,5 @@ INT i_APCI1710_InsnBitsGetTorCounterProgressStatusAndValue(struct comedi_device
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.h
index c245d16207b..03a93cb26d7 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.h
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.h
@@ -35,23 +35,23 @@
 /*
  * TOR_COUNTER INISIALISATION FUNCTION
  */
-INT i_APCI1710_InsnConfigInitTorCounter(struct comedi_device *dev,
+int i_APCI1710_InsnConfigInitTorCounter(struct comedi_device *dev,
 					struct comedi_subdevice *s,
 					struct comedi_insn *insn, unsigned int *data);
 
-INT i_APCI1710_InsnWriteEnableDisableTorCounter(struct comedi_device *dev,
+int i_APCI1710_InsnWriteEnableDisableTorCounter(struct comedi_device *dev,
 						struct comedi_subdevice *s,
 						struct comedi_insn *insn,
 						unsigned int *data);
 
-INT i_APCI1710_InsnReadGetTorCounterInitialisation(struct comedi_device *dev,
+int i_APCI1710_InsnReadGetTorCounterInitialisation(struct comedi_device *dev,
 						   struct comedi_subdevice *s,
 						   struct comedi_insn *insn,
 						   unsigned int *data);
 /*
  * TOR_COUNTER READ FUNCTION
  */
-INT i_APCI1710_InsnBitsGetTorCounterProgressStatusAndValue(struct comedi_device *dev,
+int i_APCI1710_InsnBitsGetTorCounterProgressStatusAndValue(struct comedi_device *dev,
 							   struct comedi_subdevice *s,
 							   struct comedi_insn *insn,
 							   unsigned int *data);
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.c
index 68b1d26bae1..d3d78d37de5 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.c
@@ -3,13 +3,13 @@
 
 Copyright (C) 2004,2005  ADDI-DATA GmbH for the source code of this module.
 
-        ADDI-DATA GmbH
-        Dieselstrasse 3
-        D-77833 Ottersweier
-        Tel: +19(0)7223/9493-0
-        Fax: +49(0)7223/9493-92
-        http://www.addi-data-com
-        info@addi-data.com
+	ADDI-DATA GmbH
+	Dieselstrasse 3
+	D-77833 Ottersweier
+	Tel: +19(0)7223/9493-0
+	Fax: +49(0)7223/9493-92
+	http://www.addi-data-com
+	info@addi-data.com
 
 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
 
@@ -63,12 +63,12 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_InitTTLIODirection                    |
-|                               (BYTE_    b_BoardHandle,                     |
-|				 BYTE_    b_ModulNbr,                        |
-|				 BYTE_    b_PortAMode,                       |
-|				 BYTE_    b_PortBMode,                       |
-|				 BYTE_    b_PortCMode,                       |
-|				 BYTE_    b_PortDMode)                       |
+|                               (unsigned char_    b_BoardHandle,                     |
+|				 unsigned char_    b_ModulNbr,                        |
+|				 unsigned char_    b_PortAMode,                       |
+|				 unsigned char_    b_PortBMode,                       |
+|				 unsigned char_    b_PortCMode,                       |
+|				 unsigned char_    b_PortDMode)                       |
 +----------------------------------------------------------------------------+
 | Task           APCI1710_TTL_INIT (using defaults)   : Configure the TTL I/O operating mode from selected     |
 |                     module  (b_ModulNbr). You must calling this function be|
@@ -76,15 +76,15 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 				 APCI1710_TTL_INITDIRECTION(user inputs for direction)
 
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle         : Handle of board APCI-1710|
-|                     BYTE_ b_ModulNbr            : Module number to         |
+| Input Parameters  : unsigned char_ b_BoardHandle         : Handle of board APCI-1710|
+|                     unsigned char_ b_ModulNbr            : Module number to         |
 |                                                   configure (0 to 3)
-		b_ModulNbr = (BYTE) CR_AREF(insn->chanspec);
-		b_InitType = (BYTE) data[0];
-		b_PortAMode	= (BYTE) data[1];
-		b_PortBMode = (BYTE) data[2];
-		b_PortCMode = (BYTE) data[3];
-		b_PortDMode	= (BYTE) data[4];|
+		b_ModulNbr = (unsigned char) CR_AREF(insn->chanspec);
+		b_InitType = (unsigned char) data[0];
+		b_PortAMode	= (unsigned char) data[1];
+		b_PortBMode = (unsigned char) data[2];
+		b_PortCMode = (unsigned char) data[3];
+		b_PortDMode	= (unsigned char) data[4];|
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
 +----------------------------------------------------------------------------+
@@ -100,19 +100,19 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InsnConfigInitTTLIO(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnConfigInitTTLIO(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = 0;
-	BYTE b_ModulNbr;
-	BYTE b_InitType;
-	BYTE b_PortAMode;
-	BYTE b_PortBMode;
-	BYTE b_PortCMode;
-	BYTE b_PortDMode;
-
-	b_ModulNbr = (BYTE) CR_AREF(insn->chanspec);
-	b_InitType = (BYTE) data[0];
+	int i_ReturnValue = 0;
+	unsigned char b_ModulNbr;
+	unsigned char b_InitType;
+	unsigned char b_PortAMode;
+	unsigned char b_PortBMode;
+	unsigned char b_PortCMode;
+	unsigned char b_PortDMode;
+
+	b_ModulNbr = (unsigned char) CR_AREF(insn->chanspec);
+	b_InitType = (unsigned char) data[0];
 	i_ReturnValue = insn->n;
 
 	/**************************/
@@ -172,10 +172,10 @@ INT i_APCI1710_InsnConfigInitTTLIO(struct comedi_device * dev, struct comedi_sub
 
 			case APCI1710_TTL_INITDIRECTION:
 
-				b_PortAMode = (BYTE) data[1];
-				b_PortBMode = (BYTE) data[2];
-				b_PortCMode = (BYTE) data[3];
-				b_PortDMode = (BYTE) data[4];
+				b_PortAMode = (unsigned char) data[1];
+				b_PortBMode = (unsigned char) data[2];
+				b_PortCMode = (unsigned char) data[3];
+				b_PortDMode = (unsigned char) data[4];
 
 	      /********************/
 				/* Test the version */
@@ -322,7 +322,7 @@ INT i_APCI1710_InsnConfigInitTTLIO(struct comedi_device * dev, struct comedi_sub
 				DPRINTK("\n");
 			default:
 				printk("Bad Config Type\n");
-			}	// switch end
+			}	/*  switch end */
 		} else {
 	      /**********************************/
 			/* The module is not a TTL module */
@@ -340,7 +340,7 @@ INT i_APCI1710_InsnConfigInitTTLIO(struct comedi_device * dev, struct comedi_sub
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
@@ -352,11 +352,11 @@ INT i_APCI1710_InsnConfigInitTTLIO(struct comedi_device * dev, struct comedi_sub
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_   i_APCI1710_ReadTTLIOChannelValue               |
-|                                       (BYTE_     b_BoardHandle,            |
-|                                        BYTE_     b_ModulNbr,               |
-|                                        BYTE_     b_SelectedPort,           |
-|                                        BYTE_     b_InputChannel,           |
-|                                        PBYTE_   pb_ChannelStatus)          |
+|                                       (unsigned char_     b_BoardHandle,            |
+|                                        unsigned char_     b_ModulNbr,               |
+|                                        unsigned char_     b_SelectedPort,           |
+|                                        unsigned char_     b_InputChannel,           |
+|                                        unsigned char *_   pb_ChannelStatus)          |
 +----------------------------------------------------------------------------+
 | Task              : Read the status from selected TTL digital input        |
 |                     (b_InputChannel)
@@ -366,32 +366,32 @@ INT i_APCI1710_InsnConfigInitTTLIO(struct comedi_device * dev, struct comedi_sub
 +----------------------------------------------------------------------------+
 
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle         : Handle of board APCI-1710|
-|                     BYTE_ b_ModulNbr            : Module number to         |
+| Input Parameters  : unsigned char_ b_BoardHandle         : Handle of board APCI-1710|
+|                     unsigned char_ b_ModulNbr            : Module number to         |
 |                                                   configure (0 to 7)       |
-|                     BYTE_ b_SelectedPort,       : Selection from TTL I/O   |
+|                     unsigned char_ b_SelectedPort,       : Selection from TTL I/O   |
 |                                                   port (0 to 2)            |
 |                                                      0 : Port A selection  |
 |                                                      1 : Port B selection  |
 |                                                      2 : Port C selection  |
 |                                                      3 : Port D selection  |
-|                     BYTE_ b_InputChannel        : Selection from digital   |
+|                     unsigned char_ b_InputChannel        : Selection from digital   |
 |                                                   input ( 0 to 2)
 APCI1710_TTL_READCHANNEL
 	b_ModulNbr	  = CR_AREF(insn->chanspec);
 	b_SelectedPort= CR_RANGE(insn->chanspec);
 	b_InputChannel= CR_CHAN(insn->chanspec);
-	b_ReadType	  = (BYTE) data[0];
+	b_ReadType	  = (unsigned char) data[0];
 
  APCI1710_TTL_READPORT|
 	b_ModulNbr	  = CR_AREF(insn->chanspec);
 	b_SelectedPort= CR_RANGE(insn->chanspec);
-	b_ReadType	  = (BYTE) data[0];
+	b_ReadType	  = (unsigned char) data[0];
 
 +----------------------------------------------------------------------------+
 | Output Parameters : data[0]
 
-	PBYTE_  pb_ChannelStatus    : Digital input channel    |
+	unsigned char *_  pb_ChannelStatus    : Digital input channel    |
 |                                                   status                   |
 |                                                   0 : Channle is not active|
 |                                                   1 : Channle is active    |
@@ -406,20 +406,20 @@ APCI1710_TTL_READCHANNEL
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InsnBitsReadTTLIO(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnBitsReadTTLIO(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_StatusReg;
-	BYTE b_ModulNbr;
-	BYTE b_SelectedPort;
-	BYTE b_InputChannel;
-	BYTE b_ReadType;
-	PBYTE pb_ChannelStatus;
-	PBYTE pb_PortValue;
+	int i_ReturnValue = 0;
+	unsigned int dw_StatusReg;
+	unsigned char b_ModulNbr;
+	unsigned char b_SelectedPort;
+	unsigned char b_InputChannel;
+	unsigned char b_ReadType;
+	unsigned char *pb_ChannelStatus;
+	unsigned char *pb_PortValue;
 
 	i_ReturnValue = insn->n;
-	b_ReadType = (BYTE) data[0];
+	b_ReadType = (unsigned char) data[0];
 	b_ModulNbr = CR_AREF(insn->chanspec);
 	b_SelectedPort = CR_RANGE(insn->chanspec);
 	b_InputChannel = CR_CHAN(insn->chanspec);
@@ -439,7 +439,7 @@ INT i_APCI1710_InsnBitsReadTTLIO(struct comedi_device * dev, struct comedi_subde
 			switch (b_ReadType) {
 
 			case APCI1710_TTL_READCHANNEL:
-				pb_ChannelStatus = (PBYTE) & data[0];
+				pb_ChannelStatus = (unsigned char *) &data[0];
 	      /********************************/
 				/* Test the TTL I/O port number */
 	      /********************************/
@@ -493,7 +493,7 @@ INT i_APCI1710_InsnBitsReadTTLIO(struct comedi_device * dev, struct comedi_subde
 
 								*pb_ChannelStatus
 									=
-									(BYTE) (
+									(unsigned char) (
 									(dw_StatusReg
 										>>
 										(8 * b_SelectedPort)) >> b_InputChannel) & 1;
@@ -533,7 +533,7 @@ INT i_APCI1710_InsnBitsReadTTLIO(struct comedi_device * dev, struct comedi_subde
 				break;
 
 			case APCI1710_TTL_READPORT:
-				pb_PortValue = (PBYTE) & data[0];
+				pb_PortValue = (unsigned char *) &data[0];
 			  /********************************/
 				/* Test the TTL I/O port number */
 			  /********************************/
@@ -578,7 +578,7 @@ INT i_APCI1710_InsnBitsReadTTLIO(struct comedi_device * dev, struct comedi_subde
 								(64 * b_ModulNbr));
 
 							*pb_PortValue =
-								(BYTE) (
+								(unsigned char) (
 								(dw_StatusReg >>
 									(8 * b_SelectedPort)) & 0xFF);
 						} else {
@@ -610,7 +610,7 @@ INT i_APCI1710_InsnBitsReadTTLIO(struct comedi_device * dev, struct comedi_subde
 			default:
 				printk("Bad ReadType\n");
 
-			}	//End Switch
+			}	/* End Switch */
 		} else {
 	      /**********************************/
 			/* The module is not a TTL module */
@@ -628,20 +628,20 @@ INT i_APCI1710_InsnBitsReadTTLIO(struct comedi_device * dev, struct comedi_subde
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
-| Function Name     : INT i_APCI1710_InsnReadTTLIOAllPortValue(comedi_device
+| Function Name     : int i_APCI1710_InsnReadTTLIOAllPortValue(comedi_device
 *dev,struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data)              |
 +----------------------------------------------------------------------------+
 | Task              : Read the status from all digital input ports           |
 |                     (port A, port B and port C) from selected TTL          |
 |		      module (b_ModulNbr) 				     |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle         : Handle of board APCI-1710|
-|                     BYTE_ b_ModulNbr            : Module number to         |
+| Input Parameters  : unsigned char_ b_BoardHandle         : Handle of board APCI-1710|
+|                     unsigned char_ b_ModulNbr            : Module number to         |
 |                                                   configure (0 to 3)       |
 +----------------------------------------------------------------------------+
 | Output Parameters : PULONG_  pul_PortValue      : Digital TTL inputs port  |
@@ -655,17 +655,17 @@ INT i_APCI1710_InsnBitsReadTTLIO(struct comedi_device * dev, struct comedi_subde
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InsnReadTTLIOAllPortValue(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnReadTTLIOAllPortValue(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_StatusReg;
-	BYTE b_ModulNbr;
-	PULONG pul_PortValue;
+	int i_ReturnValue = 0;
+	unsigned int dw_StatusReg;
+	unsigned char b_ModulNbr;
+	unsigned int *pul_PortValue;
 
-	b_ModulNbr = (BYTE) CR_AREF(insn->chanspec);
+	b_ModulNbr = (unsigned char) CR_AREF(insn->chanspec);
 	i_ReturnValue = insn->n;
-	pul_PortValue = (PULONG) & data[0];
+	pul_PortValue = (unsigned int *) &data[0];
 
 	/**************************/
 	/* Test the module number */
@@ -777,7 +777,7 @@ INT i_APCI1710_InsnReadTTLIOAllPortValue(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
@@ -789,19 +789,19 @@ INT i_APCI1710_InsnReadTTLIOAllPortValue(struct comedi_device * dev,
 /*
 +----------------------------------------------------------------------------+
 | Function Name     : _INT_ i_APCI1710_SetTTLIOChlOn                         |
-|                               (BYTE_           b_BoardHandle,              |
-|                                BYTE_           b_ModulNbr,                 |
-|                                BYTE_           b_OutputChannel)
-INT i_APCI1710_InsnWriteSetTTLIOChlOnOff(struct comedi_device *dev,struct comedi_subdevice *s,
+|                               (unsigned char_           b_BoardHandle,              |
+|                                unsigned char_           b_ModulNbr,                 |
+|                                unsigned char_           b_OutputChannel)
+int i_APCI1710_InsnWriteSetTTLIOChlOnOff(struct comedi_device *dev,struct comedi_subdevice *s,
 	struct comedi_insn *insn,unsigned int *data)           |
 +----------------------------------------------------------------------------+
 | Task              : Sets or resets  the output witch has been passed with the         |
 |                     parameter b_Channel. Setting an output means setting   |
 |                     an ouput high.                                         |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE_ b_BoardHandle   : Handle of board APCI-1710      |
-|                     BYTE_ b_ModulNbr      : Selected module number (0 to 3)|
-|                     BYTE_ b_OutputChannel : Selection from digital output  |
+| Input Parameters  : unsigned char_ b_BoardHandle   : Handle of board APCI-1710      |
+|                     unsigned char_ b_ModulNbr      : Selected module number (0 to 3)|
+|                     unsigned char_ b_OutputChannel : Selection from digital output  |
 |                                             channel (0 or 1)               |
 |                                                0      : PD0                |
 |                                                1      : PD1                |
@@ -811,7 +811,7 @@ INT i_APCI1710_InsnWriteSetTTLIOChlOnOff(struct comedi_device *dev,struct comedi
 
   b_ModulNbr	   = CR_AREF(insn->chanspec);
 	b_OutputChannel= CR_CHAN(insn->chanspec);
-	ui_State	   = data[0]; // ON or OFF
+	ui_State	   = data[0]; /*  ON or OFF */
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
 +----------------------------------------------------------------------------+
@@ -825,19 +825,19 @@ INT i_APCI1710_InsnWriteSetTTLIOChlOnOff(struct comedi_device *dev,struct comedi
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1710_InsnWriteSetTTLIOChlOnOff(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI1710_InsnWriteSetTTLIOChlOnOff(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = 0;
-	DWORD dw_StatusReg = 0;
-	BYTE b_ModulNbr;
-	BYTE b_OutputChannel;
-	UINT ui_State;
+	int i_ReturnValue = 0;
+	unsigned int dw_StatusReg = 0;
+	unsigned char b_ModulNbr;
+	unsigned char b_OutputChannel;
+	unsigned int ui_State;
 
 	i_ReturnValue = insn->n;
 	b_ModulNbr = CR_AREF(insn->chanspec);
 	b_OutputChannel = CR_CHAN(insn->chanspec);
-	ui_State = data[0];	// ON or OFF
+	ui_State = data[0];	/*  ON or OFF */
 
 	/**************************/
 	/* Test the module number */
@@ -953,7 +953,7 @@ INT i_APCI1710_InsnWriteSetTTLIOChlOnOff(struct comedi_device * dev,
 									ui_Address
 									+
 									(64 * b_ModulNbr));
-								if (ui_State)	// ON
+								if (ui_State)	/*  ON */
 								{
 									dw_StatusReg
 										=
@@ -969,7 +969,7 @@ INT i_APCI1710_InsnWriteSetTTLIOChlOnOff(struct comedi_device * dev,
 										(b_OutputChannel
 											%
 											8));
-								} else	// Off
+								} else	/*  Off */
 								{
 									dw_StatusReg
 										=
@@ -1034,5 +1034,5 @@ INT i_APCI1710_InsnWriteSetTTLIOChlOnOff(struct comedi_device * dev,
 		i_ReturnValue = -2;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.h
index 00915ddf921..c4f11347f24 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.h
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.h
@@ -24,21 +24,21 @@
 /*
  * TTL INISIALISATION FUNCTION
  */
-INT i_APCI1710_InsnConfigInitTTLIO(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI1710_InsnConfigInitTTLIO(struct comedi_device *dev, struct comedi_subdevice *s,
 				   struct comedi_insn *insn, unsigned int *data);
 
 /*
  * TTL INPUT FUNCTION
  */
-INT i_APCI1710_InsnBitsReadTTLIO(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI1710_InsnBitsReadTTLIO(struct comedi_device *dev, struct comedi_subdevice *s,
 				 struct comedi_insn *insn, unsigned int *data);
-INT i_APCI1710_InsnReadTTLIOAllPortValue(struct comedi_device *dev,
+int i_APCI1710_InsnReadTTLIOAllPortValue(struct comedi_device *dev,
 					 struct comedi_subdevice *s,
 					 struct comedi_insn *insn, unsigned int *data);
 
 /*
  * TTL OUTPUT FUNCTIONS
  */
-INT i_APCI1710_InsnWriteSetTTLIOChlOnOff(struct comedi_device *dev,
+int i_APCI1710_InsnWriteSetTTLIOChlOnOff(struct comedi_device *dev,
 					 struct comedi_subdevice *s,
 					 struct comedi_insn *insn, unsigned int *data);
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.c b/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.c
index b0907ec1466..6e9e7ed4dba 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.c
@@ -3,13 +3,13 @@
 
 Copyright (C) 2004,2005  ADDI-DATA GmbH for the source code of this module.
 
-        ADDI-DATA GmbH
-        Dieselstrasse 3
-        D-77833 Ottersweier
-        Tel: +19(0)7223/9493-0
-        Fax: +49(0)7223/9493-92
-        http://www.addi-data-com
-        info@addi-data.com
+	ADDI-DATA GmbH
+	Dieselstrasse 3
+	D-77833 Ottersweier
+	Tel: +19(0)7223/9493-0
+	Fax: +49(0)7223/9493-92
+	http://www.addi-data-com
+	info@addi-data.com
 
 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
 
@@ -49,37 +49,37 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 #include "addi_amcc_S5920.h"
 
 /*+----------------------------------------------------------------------------+*/
-/*| Function   Name   : INT i_AddiHeaderRW_ReadEeprom                          |*/
-/*|                               (INT    i_NbOfWordsToRead,                   |*/
-/*|                                DWORD dw_PCIBoardEepromAddress,             |*/
-/*|                                WORD   w_EepromStartAddress,                |*/
-/*|                                PWORD pw_DataRead)                          |*/
+/*| Function   Name   : int i_AddiHeaderRW_ReadEeprom                          |*/
+/*|                               (int    i_NbOfWordsToRead,                   |*/
+/*|                                unsigned int dw_PCIBoardEepromAddress,             |*/
+/*|                                unsigned short   w_EepromStartAddress,                |*/
+/*|                                unsigned short * pw_DataRead)                          |*/
 /*+----------------------------------------------------------------------------+*/
 /*| Task              : Read word from the 5920 eeprom.                        |*/
 /*+----------------------------------------------------------------------------+*/
-/*| Input Parameters  : INT    i_NbOfWordsToRead : Nbr. of word to read        |*/
-/*|                     DWORD dw_PCIBoardEepromAddress : Address of the eeprom |*/
-/*|                     WORD   w_EepromStartAddress : Eeprom strat address     |*/
+/*| Input Parameters  : int    i_NbOfWordsToRead : Nbr. of word to read        |*/
+/*|                     unsigned int dw_PCIBoardEepromAddress : Address of the eeprom |*/
+/*|                     unsigned short   w_EepromStartAddress : Eeprom strat address     |*/
 /*+----------------------------------------------------------------------------+*/
-/*| Output Parameters : PWORD pw_DataRead : Read data                          |*/
+/*| Output Parameters : unsigned short * pw_DataRead : Read data                          |*/
 /*+----------------------------------------------------------------------------+*/
 /*| Return Value      : -                                                      |*/
 /*+----------------------------------------------------------------------------+*/
 
-INT i_AddiHeaderRW_ReadEeprom(INT i_NbOfWordsToRead,
-	DWORD dw_PCIBoardEepromAddress,
-	WORD w_EepromStartAddress, PWORD pw_DataRead)
+int i_AddiHeaderRW_ReadEeprom(int i_NbOfWordsToRead,
+	unsigned int dw_PCIBoardEepromAddress,
+	unsigned short w_EepromStartAddress, unsigned short *pw_DataRead)
 {
-	DWORD dw_eeprom_busy = 0;
-	INT i_Counter = 0;
-	INT i_WordCounter;
-	INT i;
-	BYTE pb_ReadByte[1];
-	BYTE b_ReadLowByte = 0;
-	BYTE b_ReadHighByte = 0;
-	BYTE b_SelectedAddressLow = 0;
-	BYTE b_SelectedAddressHigh = 0;
-	WORD w_ReadWord = 0;
+	unsigned int dw_eeprom_busy = 0;
+	int i_Counter = 0;
+	int i_WordCounter;
+	int i;
+	unsigned char pb_ReadByte[1];
+	unsigned char b_ReadLowByte = 0;
+	unsigned char b_ReadHighByte = 0;
+	unsigned char b_SelectedAddressLow = 0;
+	unsigned char b_SelectedAddressHigh = 0;
+	unsigned short w_ReadWord = 0;
 
 	for (i_WordCounter = 0; i_WordCounter < i_NbOfWordsToRead;
 		i_WordCounter++) {
@@ -88,106 +88,99 @@ INT i_AddiHeaderRW_ReadEeprom(INT i_NbOfWordsToRead,
 				inl(dw_PCIBoardEepromAddress +
 				AMCC_OP_REG_MCSR);
 			dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY;
-		}
-		while (dw_eeprom_busy == EEPROM_BUSY);
+		} while (dw_eeprom_busy == EEPROM_BUSY);
 
 		for (i_Counter = 0; i_Counter < 2; i_Counter++) {
-			b_SelectedAddressLow = (w_EepromStartAddress + i_Counter) % 256;	//Read the low 8 bit part
-			b_SelectedAddressHigh = (w_EepromStartAddress + i_Counter) / 256;	//Read the high 8 bit part
+			b_SelectedAddressLow = (w_EepromStartAddress + i_Counter) % 256;	/* Read the low 8 bit part */
+			b_SelectedAddressHigh = (w_EepromStartAddress + i_Counter) / 256;	/* Read the high 8 bit part */
 
-			//Select the load low address mode
+			/* Select the load low address mode */
 			outb(NVCMD_LOAD_LOW,
 				dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR +
 				3);
 
-			//Wait on busy
+			/* Wait on busy */
 			do {
 				dw_eeprom_busy =
 					inl(dw_PCIBoardEepromAddress +
 					AMCC_OP_REG_MCSR);
 				dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY;
-			}
-			while (dw_eeprom_busy == EEPROM_BUSY);
+			} while (dw_eeprom_busy == EEPROM_BUSY);
 
-			//Load the low address
+			/* Load the low address */
 			outb(b_SelectedAddressLow,
 				dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR +
 				2);
 
-			//Wait on busy
+			/* Wait on busy */
 			do {
 				dw_eeprom_busy =
 					inl(dw_PCIBoardEepromAddress +
 					AMCC_OP_REG_MCSR);
 				dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY;
-			}
-			while (dw_eeprom_busy == EEPROM_BUSY);
+			} while (dw_eeprom_busy == EEPROM_BUSY);
 
-			//Select the load high address mode
+			/* Select the load high address mode */
 			outb(NVCMD_LOAD_HIGH,
 				dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR +
 				3);
 
-			//Wait on busy
+			/* Wait on busy */
 			do {
 				dw_eeprom_busy =
 					inl(dw_PCIBoardEepromAddress +
 					AMCC_OP_REG_MCSR);
 				dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY;
-			}
-			while (dw_eeprom_busy == EEPROM_BUSY);
+			} while (dw_eeprom_busy == EEPROM_BUSY);
 
-			//Load the high address
+			/* Load the high address */
 			outb(b_SelectedAddressHigh,
 				dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR +
 				2);
 
-			//Wait on busy
+			/* Wait on busy */
 			do {
 				dw_eeprom_busy =
 					inl(dw_PCIBoardEepromAddress +
 					AMCC_OP_REG_MCSR);
 				dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY;
-			}
-			while (dw_eeprom_busy == EEPROM_BUSY);
+			} while (dw_eeprom_busy == EEPROM_BUSY);
 
-			//Select the READ mode
+			/* Select the READ mode */
 			outb(NVCMD_BEGIN_READ,
 				dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR +
 				3);
 
-			//Wait on busy
+			/* Wait on busy */
 			do {
 				dw_eeprom_busy =
 					inl(dw_PCIBoardEepromAddress +
 					AMCC_OP_REG_MCSR);
 				dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY;
-			}
-			while (dw_eeprom_busy == EEPROM_BUSY);
+			} while (dw_eeprom_busy == EEPROM_BUSY);
 
-			//Read data into the EEPROM
+			/* Read data into the EEPROM */
 			*pb_ReadByte =
 				inb(dw_PCIBoardEepromAddress +
 				AMCC_OP_REG_MCSR + 2);
 
-			//Wait on busy
+			/* Wait on busy */
 			do {
 				dw_eeprom_busy =
 					inl(dw_PCIBoardEepromAddress +
 					AMCC_OP_REG_MCSR);
 				dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY;
-			}
-			while (dw_eeprom_busy == EEPROM_BUSY);
+			} while (dw_eeprom_busy == EEPROM_BUSY);
 
-			//Select the upper address part
+			/* Select the upper address part */
 			if (i_Counter == 0) {
 				b_ReadLowByte = pb_ReadByte[0];
 			} else {
 				b_ReadHighByte = pb_ReadByte[0];
 			}
 
-			//Sleep
-			for (i = 0; i < 10000; i++) ;
+			/* Sleep */
+			msleep(1);
 
 		}
 		w_ReadWord =
@@ -196,8 +189,8 @@ INT i_AddiHeaderRW_ReadEeprom(INT i_NbOfWordsToRead,
 
 		pw_DataRead[i_WordCounter] = w_ReadWord;
 
-		w_EepromStartAddress += 2;	// to read the next word
+		w_EepromStartAddress += 2;	/*  to read the next word */
 
-	}			// for (...) i_NbOfWordsToRead
-	return (0);
+	}			/*  for (...) i_NbOfWordsToRead */
+	return 0;
 }
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.h b/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.h
index 9ae56bc3ada..622a4ac2b79 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.h
+++ b/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.h
@@ -22,6 +22,6 @@
 #define NVCMD_BEGIN_READ	(0x7 << 5)	/* nvRam begin read command */
 #define NVCMD_BEGIN_WRITE	(0x6 << 5)	/* EEPROM begin write command */
 
-INT i_AddiHeaderRW_ReadEeprom(INT i_NbOfWordsToRead,
-			      DWORD dw_PCIBoardEepromAddress,
-			      WORD w_EepromStartAddress, PWORD pw_DataRead);
+int i_AddiHeaderRW_ReadEeprom(int i_NbOfWordsToRead,
+			      unsigned int dw_PCIBoardEepromAddress,
+			      unsigned short w_EepromStartAddress, unsigned short *pw_DataRead);
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_amcc_s5933.h b/drivers/staging/comedi/drivers/addi-data/addi_amcc_s5933.h
index b50774cdcf7..d288289143e 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_amcc_s5933.h
+++ b/drivers/staging/comedi/drivers/addi-data/addi_amcc_s5933.h
@@ -85,7 +85,7 @@
 #define AMCC_OP_REG_MRTC		0x30
 #define AMCC_OP_REG_MBEF		0x34
 #define AMCC_OP_REG_INTCSR		0x38
-/* INT source */
+/* int source */
 #define  AMCC_OP_REG_INTCSR_SRC		(AMCC_OP_REG_INTCSR + 2)
 /* FIFO ctrl */
 #define  AMCC_OP_REG_INTCSR_FEC		(AMCC_OP_REG_INTCSR + 3)
@@ -343,7 +343,7 @@ int i_find_free_pci_card_by_position(unsigned short vendor_id,
 				*card = amcc;
 				return 0;	/* ok, card is found */
 			} else {
-				rt_printk(" - \nCard on requested position is used b:s %d:%d!\n",
+				printk(" - \nCard on requested position is used b:s %d:%d!\n",
 					  pci_bus, pci_slot);
 				return 2;	/* card exist but is used */
 			}
@@ -447,7 +447,7 @@ struct pcilst_struct *ptr_select_and_alloc_pci_card(unsigned short vendor_id,
 		/* use autodetection */
 		card = ptr_find_free_pci_card_by_device(vendor_id, device_id);
 		if (card == NULL) {
-			rt_printk(" - Unused card not found in system!\n");
+			printk(" - Unused card not found in system!\n");
 			return NULL;
 		}
 	} else {
@@ -455,18 +455,18 @@ struct pcilst_struct *ptr_select_and_alloc_pci_card(unsigned short vendor_id,
 							 pci_bus, pci_slot,
 							 &card)) {
 		case 1:
-			rt_printk(" - Card not found on requested position b:s %d:%d!\n",
+			printk(" - Card not found on requested position b:s %d:%d!\n",
 				  pci_bus, pci_slot);
 			return NULL;
 		case 2:
-			rt_printk(" - Card on requested position is used b:s %d:%d!\n",
+			printk(" - Card on requested position is used b:s %d:%d!\n",
 				  pci_bus, pci_slot);
 			return NULL;
 		}
 	}
 
 	if (pci_card_alloc(card, i_Master) != 0) {
-		rt_printk(" - Can't allocate card!\n");
+		printk(" - Can't allocate card!\n");
 		return NULL;
 
 	}
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_common.c b/drivers/staging/comedi/drivers/addi-data/addi_common.c
index 618c69b6838..a56535fbcd3 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_common.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_common.c
@@ -3,13 +3,13 @@
 
 Copyright (C) 2004,2005  ADDI-DATA GmbH for the source code of this module.
 
-        ADDI-DATA GmbH
-        Dieselstrasse 3
-        D-77833 Ottersweier
-        Tel: +19(0)7223/9493-0
-        Fax: +49(0)7223/9493-92
-        http://www.addi-data-com
-        info@addi-data.com
+	ADDI-DATA GmbH
+	Dieselstrasse 3
+	D-77833 Ottersweier
+	Tel: +19(0)7223/9493-0
+	Fax: +49(0)7223/9493-92
+	http://www.addi-data-com
+	info@addi-data.com
 
 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
 
@@ -68,25 +68,25 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 #include "addi_common.h"
 #include "addi_amcc_s5933.h"
 
-//Update-0.7.57->0.7.68MODULE_AUTHOR("ADDI-DATA GmbH <info@addi-data.com>");
-//Update-0.7.57->0.7.68MODULE_DESCRIPTION("Comedi ADDI-DATA module");
-//Update-0.7.57->0.7.68MODULE_LICENSE("GPL");
+/* Update-0.7.57->0.7.68MODULE_AUTHOR("ADDI-DATA GmbH <info@addi-data.com>"); */
+/* Update-0.7.57->0.7.68MODULE_DESCRIPTION("Comedi ADDI-DATA module"); */
+/* Update-0.7.57->0.7.68MODULE_LICENSE("GPL"); */
 
-#define devpriv ((addi_private *)dev->private)
-#define this_board ((boardtype *)dev->board_ptr)
+#define devpriv ((struct addi_private *)dev->private)
+#define this_board ((struct addi_board *)dev->board_ptr)
 
 #if defined(CONFIG_APCI_1710) || defined(CONFIG_APCI_3200) || defined(CONFIG_APCI_3300)
-//BYTE b_SaveFPUReg [94];
+/* BYTE b_SaveFPUReg [94]; */
 
 void fpu_begin(void)
 {
-	//asm ("fstenv b_SaveFPUReg");
+	/* asm ("fstenv b_SaveFPUReg"); */
 	kernel_fpu_begin();
 }
 
 void fpu_end(void)
 {
-	// asm ("frstor b_SaveFPUReg");
+	/*  asm ("frstor b_SaveFPUReg"); */
 	kernel_fpu_end();
 }
 #endif
@@ -219,7 +219,7 @@ static DEFINE_PCI_DEVICE_TABLE(addi_apci_tbl) = {
 
 MODULE_DEVICE_TABLE(pci, addi_apci_tbl);
 
-static const boardtype boardtypes[] = {
+static const struct addi_board boardtypes[] = {
 #ifdef CONFIG_APCI_3120
 	{"apci3120",
 			APCI3120_BOARD_VENDOR_ID,
@@ -901,7 +901,7 @@ static const boardtype boardtypes[] = {
 		NULL},
 #endif
 #ifdef CONFIG_APCI_3300
-	//Begin JK 20.10.2004: APCI-3300 integration
+	/* Begin JK	.20.10.2004 = APCI-3300 integration */
 	{"apci3300",
 			APCI3200_BOARD_VENDOR_ID,
 			0x3007,
@@ -2525,16 +2525,16 @@ static const boardtype boardtypes[] = {
 #endif
 };
 
-#define n_boardtypes (sizeof(boardtypes)/sizeof(boardtype))
+#define n_boardtypes (sizeof(boardtypes)/sizeof(struct addi_board))
 
 struct comedi_driver driver_addi = {
-      driver_name:"addi_common",
-      module:THIS_MODULE,
-      attach:i_ADDI_Attach,
-      detach:i_ADDI_Detach,
-      num_names:n_boardtypes,
-      board_name:&boardtypes[0].pc_DriverName,
-      offset:sizeof(boardtype),
+	.driver_name = "addi_common",
+	.module = THIS_MODULE,
+	.attach = i_ADDI_Attach,
+	.detach = i_ADDI_Detach,
+	.num_names = n_boardtypes,
+	.board_name = &boardtypes[0].pc_DriverName,
+	.offset = sizeof(struct addi_board),
 };
 
 COMEDI_PCI_INITCLEANUP(driver_addi, addi_apci_tbl);
@@ -2559,11 +2559,11 @@ COMEDI_PCI_INITCLEANUP(driver_addi, addi_apci_tbl);
 +----------------------------------------------------------------------------+
 */
 
-static int i_ADDI_Attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int i_ADDI_Attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	int ret, pages, i, n_subdevices;
-	DWORD dw_Dummy;
+	unsigned int dw_Dummy;
 	resource_size_t io_addr[5];
 	unsigned int irq;
 	resource_size_t iobase_a, iobase_main, iobase_addon, iobase_reserved;
@@ -2575,26 +2575,28 @@ static int i_ADDI_Attach(struct comedi_device * dev, struct comedi_devconfig * i
 	sprintf(c_Identifier, "Addi-Data GmbH Comedi %s",
 		this_board->pc_DriverName);
 
-	if ((ret = alloc_private(dev, sizeof(addi_private))) < 0) {
-	  	return -ENOMEM;
-	}
+	ret = alloc_private(dev, sizeof(struct addi_private));
+	if (ret < 0)
+		return -ENOMEM;
 
 	if (!pci_list_builded) {
-		v_pci_card_list_init(this_board->i_VendorId, 1);	//1 for displaying the list..
+		v_pci_card_list_init(this_board->i_VendorId, 1);	/* 1 for displaying the list.. */
 		pci_list_builded = 1;
 	}
-	//rt_printk("comedi%d: addi_common: board=%s",dev->minor,this_board->pc_DriverName);
+	/* printk("comedi%d: addi_common: board=%s",dev->minor,this_board->pc_DriverName); */
 
 	if ((this_board->i_Dma) && (it->options[2] == 0)) {
 		i_Dma = 1;
 	}
 
-	if ((card = ptr_select_and_alloc_pci_card(this_board->i_VendorId,
-				this_board->i_DeviceId,
-				it->options[0],
-				it->options[1], i_Dma)) == NULL) {
+	card = ptr_select_and_alloc_pci_card(this_board->i_VendorId,
+					     this_board->i_DeviceId,
+					     it->options[0],
+					     it->options[1], i_Dma);
+
+	if (card == NULL)
 		return -EIO;
-	}
+
 	devpriv->allocated = 1;
 
 	if ((i_pci_card_data(card, &pci_bus, &pci_slot, &pci_func, &io_addr[0],
@@ -2617,63 +2619,63 @@ static int i_ADDI_Attach(struct comedi_device * dev, struct comedi_devconfig * i
 	   /************************************/
 
 		if (this_board->i_IorangeBase1 != 0) {
-			dev->iobase = (unsigned long)iobase_main;	// DAQ base address...
+			dev->iobase = (unsigned long)iobase_main;	/*  DAQ base address... */
 		} else {
-			dev->iobase = (unsigned long)iobase_a;	// DAQ base address...
+			dev->iobase = (unsigned long)iobase_a;	/*  DAQ base address... */
 		}
 
 		dev->board_name = this_board->pc_DriverName;
 		devpriv->amcc = card;
-		devpriv->iobase = (INT) dev->iobase;
-		devpriv->i_IobaseAmcc = (INT) iobase_a;	//AMCC base address...
-		devpriv->i_IobaseAddon = (INT) iobase_addon;	//ADD ON base address....
-		devpriv->i_IobaseReserved = (INT) iobase_reserved;
+		devpriv->iobase = (int) dev->iobase;
+		devpriv->i_IobaseAmcc = (int) iobase_a;	/* AMCC base address... */
+		devpriv->i_IobaseAddon = (int) iobase_addon;	/* ADD ON base address.... */
+		devpriv->i_IobaseReserved = (int) iobase_reserved;
 		devpriv->ps_BoardInfo = this_board;
 	} else {
 		dev->board_name = this_board->pc_DriverName;
 		dev->iobase = (unsigned long)io_addr[2];
 		devpriv->amcc = card;
-		devpriv->iobase = (INT) io_addr[2];
+		devpriv->iobase = (int) io_addr[2];
 		devpriv->ps_BoardInfo = this_board;
-		devpriv->i_IobaseReserved = (INT) io_addr[3];
+		devpriv->i_IobaseReserved = (int) io_addr[3];
 		printk("\nioremap begin");
 		devpriv->dw_AiBase =
-			(ULONG_PTR) ioremap(io_addr[3],
+			(unsigned long) ioremap(io_addr[3],
 			this_board->i_IorangeBase3);
 		printk("\nioremap end");
 	}
 
-	//##
+	/* ## */
 
 	if (irq > 0) {
-		if (comedi_request_irq(irq, v_ADDI_Interrupt, IRQF_SHARED,
+		if (request_irq(irq, v_ADDI_Interrupt, IRQF_SHARED,
 				c_Identifier, dev) < 0) {
 			printk(", unable to allocate IRQ %u, DISABLING IT",
 				irq);
 			irq = 0;	/* Can't use IRQ */
 		} else {
-			rt_printk("\nirq=%u", irq);
+			printk("\nirq=%u", irq);
 		}
 	} else {
-		rt_printk(", IRQ disabled");
+		printk(", IRQ disabled");
 	}
 
 	printk("\nOption %d %d %d\n", it->options[0], it->options[1],
 		it->options[2]);
 	dev->irq = irq;
 
-	// Read eepeom and fill boardtype Structure
+	/*  Read eepeom and fill addi_board Structure */
 
 	if (this_board->i_PCIEeprom) {
 		printk("\nPCI Eeprom used");
 		if (!(strcmp(this_board->pc_EepromChip, "S5920"))) {
-			// Set 3 wait stait
+			/*  Set 3 wait stait */
 			if (!(strcmp(this_board->pc_DriverName, "apci035"))) {
 				outl(0x80808082, devpriv->i_IobaseAmcc + 0x60);
 			} else {
 				outl(0x83838383, devpriv->i_IobaseAmcc + 0x60);
 			}
-			// Enable the interrupt for the controler
+			/*  Enable the interrupt for the controler */
 			dw_Dummy = inl(devpriv->i_IobaseAmcc + 0x38);
 			outl(dw_Dummy | 0x2000, devpriv->i_IobaseAmcc + 0x38);
 			printk("\nEnable the interrupt for the controler");
@@ -2694,16 +2696,15 @@ static int i_ADDI_Attach(struct comedi_device * dev, struct comedi_devconfig * i
 	if (this_board->i_Dma) {
 		printk("\nDMA used");
 		if (devpriv->us_UseDma == ADDI_ENABLE) {
-			// alloc DMA buffers
+			/*  alloc DMA buffers */
 			devpriv->b_DmaDoubleBuffer = 0;
 			for (i = 0; i < 2; i++) {
 				for (pages = 4; pages >= 0; pages--) {
-					if ((devpriv->ul_DmaBufferVirtual[i] =
-							(void *)
-							__get_free_pages
-							(GFP_KERNEL, pages))) {
+					devpriv->ul_DmaBufferVirtual[i] =
+						(void *) __get_free_pages(GFP_KERNEL, pages);
+
+					if (devpriv->ul_DmaBufferVirtual[i])
 						break;
-					}
 				}
 				if (devpriv->ul_DmaBufferVirtual[i]) {
 					devpriv->ui_DmaBufferPages[i] = pages;
@@ -2718,7 +2719,7 @@ static int i_ADDI_Attach(struct comedi_device * dev, struct comedi_devconfig * i
 				}
 			}
 			if (!devpriv->ul_DmaBufferVirtual[0]) {
-				rt_printk
+				printk
 					(", Can't allocate DMA buffer, DMA disabled!");
 				devpriv->us_UseDma = ADDI_DISABLE;
 			}
@@ -2729,7 +2730,7 @@ static int i_ADDI_Attach(struct comedi_device * dev, struct comedi_devconfig * i
 		}
 
 		if ((devpriv->us_UseDma == ADDI_ENABLE)) {
-			rt_printk("\nDMA ENABLED\n");
+			printk("\nDMA ENABLED\n");
 		} else {
 			printk("\nDMA DISABLED\n");
 		}
@@ -2739,23 +2740,24 @@ static int i_ADDI_Attach(struct comedi_device * dev, struct comedi_devconfig * i
 #ifdef CONFIG_APCI_1710
 		i_ADDI_AttachPCI1710(dev);
 
-		// save base address
+		/*  save base address */
 		devpriv->s_BoardInfos.ui_Address = io_addr[2];
 #endif
 	} else {
-		//Update-0.7.57->0.7.68dev->n_subdevices = 7;
+		/* Update-0.7.57->0.7.68dev->n_subdevices = 7; */
 		n_subdevices = 7;
-		if ((ret = alloc_subdevices(dev, n_subdevices)) < 0)
+		ret = alloc_subdevices(dev, n_subdevices);
+		if (ret < 0)
 			return ret;
 
-		// Allocate and Initialise AI Subdevice Structures
+		/*  Allocate and Initialise AI Subdevice Structures */
 		s = dev->subdevices + 0;
 		if ((this_board->i_NbrAiChannel)
 			|| (this_board->i_NbrAiChannelDiff)) {
 			dev->read_subdev = s;
 			s->type = COMEDI_SUBD_AI;
 			s->subdev_flags =
-				SDF_READABLE | SDF_RT | SDF_COMMON | SDF_GROUND
+				SDF_READABLE | SDF_COMMON | SDF_GROUND
 				| SDF_DIFF;
 			if (this_board->i_NbrAiChannel) {
 				s->n_chan = this_board->i_NbrAiChannel;
@@ -2786,13 +2788,11 @@ static int i_ADDI_Attach(struct comedi_device * dev, struct comedi_devconfig * i
 			s->type = COMEDI_SUBD_UNUSED;
 		}
 
-		// Allocate and Initialise AO Subdevice Structures
+		/*  Allocate and Initialise AO Subdevice Structures */
 		s = dev->subdevices + 1;
 		if (this_board->i_NbrAoChannel) {
 			s->type = COMEDI_SUBD_AO;
-			s->subdev_flags =
-				SDF_WRITEABLE | SDF_GROUND | SDF_COMMON |
-				SDF_RT;
+			s->subdev_flags = SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
 			s->n_chan = this_board->i_NbrAoChannel;
 			s->maxdata = this_board->i_AoMaxdata;
 			s->len_chanlist = this_board->i_NbrAoChannel;
@@ -2804,12 +2804,11 @@ static int i_ADDI_Attach(struct comedi_device * dev, struct comedi_devconfig * i
 		} else {
 			s->type = COMEDI_SUBD_UNUSED;
 		}
-		// Allocate and Initialise DI Subdevice Structures
+		/*  Allocate and Initialise DI Subdevice Structures */
 		s = dev->subdevices + 2;
 		if (this_board->i_NbrDiChannel) {
 			s->type = COMEDI_SUBD_DI;
-			s->subdev_flags =
-				SDF_READABLE | SDF_RT | SDF_GROUND | SDF_COMMON;
+			s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_COMMON;
 			s->n_chan = this_board->i_NbrDiChannel;
 			s->maxdata = 1;
 			s->len_chanlist = this_board->i_NbrDiChannel;
@@ -2824,20 +2823,19 @@ static int i_ADDI_Attach(struct comedi_device * dev, struct comedi_devconfig * i
 		} else {
 			s->type = COMEDI_SUBD_UNUSED;
 		}
-		// Allocate and Initialise DO Subdevice Structures
+		/*  Allocate and Initialise DO Subdevice Structures */
 		s = dev->subdevices + 3;
 		if (this_board->i_NbrDoChannel) {
 			s->type = COMEDI_SUBD_DO;
 			s->subdev_flags =
-				SDF_READABLE | SDF_WRITEABLE | SDF_RT |
-				SDF_GROUND | SDF_COMMON;
+				SDF_READABLE | SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
 			s->n_chan = this_board->i_NbrDoChannel;
 			s->maxdata = this_board->i_DoMaxdata;
 			s->len_chanlist = this_board->i_NbrDoChannel;
 			s->range_table = &range_digital;
 			s->io_bits = 0xf;	/* all bits output */
 
-			s->insn_config = this_board->i_hwdrv_InsnConfigDigitalOutput;	//for digital output memory..
+			s->insn_config = this_board->i_hwdrv_InsnConfigDigitalOutput;	/* for digital output memory.. */
 			s->insn_write =
 				this_board->i_hwdrv_InsnWriteDigitalOutput;
 			s->insn_bits =
@@ -2848,13 +2846,11 @@ static int i_ADDI_Attach(struct comedi_device * dev, struct comedi_devconfig * i
 			s->type = COMEDI_SUBD_UNUSED;
 		}
 
-		// Allocate and Initialise Timer Subdevice Structures
+		/*  Allocate and Initialise Timer Subdevice Structures */
 		s = dev->subdevices + 4;
 		if (this_board->i_Timer) {
 			s->type = COMEDI_SUBD_TIMER;
-			s->subdev_flags =
-				SDF_WRITEABLE | SDF_RT | SDF_GROUND |
-				SDF_COMMON;
+			s->subdev_flags = SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
 			s->n_chan = 1;
 			s->maxdata = 0;
 			s->len_chanlist = 1;
@@ -2868,13 +2864,12 @@ static int i_ADDI_Attach(struct comedi_device * dev, struct comedi_devconfig * i
 			s->type = COMEDI_SUBD_UNUSED;
 		}
 
-		// Allocate and Initialise TTL
+		/*  Allocate and Initialise TTL */
 		s = dev->subdevices + 5;
 		if (this_board->i_NbrTTLChannel) {
 			s->type = COMEDI_SUBD_TTLIO;
 			s->subdev_flags =
-				SDF_WRITEABLE | SDF_READABLE | SDF_RT |
-				SDF_GROUND | SDF_COMMON;
+				SDF_WRITEABLE | SDF_READABLE | SDF_GROUND | SDF_COMMON;
 			s->n_chan = this_board->i_NbrTTLChannel;
 			s->maxdata = 1;
 			s->io_bits = 0;	/* all bits input */
@@ -2926,7 +2921,7 @@ static int i_ADDI_Attach(struct comedi_device * dev, struct comedi_devconfig * i
 +----------------------------------------------------------------------------+
 */
 
-static int i_ADDI_Detach(struct comedi_device * dev)
+static int i_ADDI_Detach(struct comedi_device *dev)
 {
 
 	if (dev->private) {
@@ -2935,7 +2930,7 @@ static int i_ADDI_Detach(struct comedi_device * dev)
 		}
 
 		if (dev->irq) {
-			comedi_free_irq(dev->irq, dev);
+			free_irq(dev->irq, dev);
 		}
 
 		if ((devpriv->ps_BoardInfo->pc_EepromChip == NULL)
@@ -2965,7 +2960,7 @@ static int i_ADDI_Detach(struct comedi_device * dev)
 		}
 
 		if (pci_list_builded) {
-			//v_pci_card_list_cleanup(PCI_VENDOR_ID_AMCC);
+			/* v_pci_card_list_cleanup(PCI_VENDOR_ID_AMCC); */
 			v_pci_card_list_cleanup(this_board->i_VendorId);
 			pci_list_builded = 0;
 		}
@@ -2992,18 +2987,18 @@ static int i_ADDI_Detach(struct comedi_device * dev)
 +----------------------------------------------------------------------------+
 */
 
-static int i_ADDI_Reset(struct comedi_device * dev)
+static int i_ADDI_Reset(struct comedi_device *dev)
 {
 
 	this_board->i_hwdrv_Reset(dev);
 	return 0;
 }
 
-// Interrupt function
+/* Interrupt function */
 /*
 +----------------------------------------------------------------------------+
 | Function name     :                                                        |
-|static void v_ADDI_Interrupt(int irq, void *d  PT_REGS_ARG)                 |
+|static void v_ADDI_Interrupt(int irq, void *d)                 |
 |                                        									 |
 +----------------------------------------------------------------------------+
 | Task              : Registerd interrupt routine						     |
@@ -3018,14 +3013,14 @@ static int i_ADDI_Reset(struct comedi_device * dev)
 +----------------------------------------------------------------------------+
 */
 
-static irqreturn_t v_ADDI_Interrupt(int irq, void *d PT_REGS_ARG)
+static irqreturn_t v_ADDI_Interrupt(int irq, void *d)
 {
 	struct comedi_device *dev = d;
 	this_board->v_hwdrv_Interrupt(irq, d);
 	return IRQ_RETVAL(1);
 }
 
-// EEPROM Read Function
+/* EEPROM Read Function */
 /*
 +----------------------------------------------------------------------------+
 | Function name     :                                                        |
@@ -3046,17 +3041,17 @@ static irqreturn_t v_ADDI_Interrupt(int irq, void *d PT_REGS_ARG)
 +----------------------------------------------------------------------------+
 */
 
-static int i_ADDIDATA_InsnReadEeprom(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int i_ADDIDATA_InsnReadEeprom(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	WORD w_Data;
-	WORD w_Address;
-	w_Address = CR_CHAN(insn->chanspec);	// address to be read as 0,1,2,3...255
+	unsigned short w_Data;
+	unsigned short w_Address;
+	w_Address = CR_CHAN(insn->chanspec);	/*  address to be read as 0,1,2,3...255 */
 
 	w_Data = w_EepromReadWord(devpriv->i_IobaseAmcc,
 		this_board->pc_EepromChip, 0x100 + (2 * w_Address));
 	data[0] = w_Data;
-	//multiplied by 2 bcozinput will be like 0,1,2...255
+	/* multiplied by 2 bcozinput will be like 0,1,2...255 */
 	return insn->n;
 
 }
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_common.h b/drivers/staging/comedi/drivers/addi-data/addi_common.h
index 19df5c1444a..edd657b902a 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_common.h
+++ b/drivers/staging/comedi/drivers/addi-data/addi_common.h
@@ -36,26 +36,12 @@
 #define ERROR	-1
 #define SUCCESS	1
 
-/* variable type definition */
-typedef unsigned char BYTE, *PBYTE;
-typedef short SHORT, *PSHORT;
-typedef unsigned short USHORT, *PUSHORT;
-typedef unsigned short WORD, *PWORD;
-typedef int INT, *PINT;;
-typedef unsigned int UINT, *PUINT;
-typedef int LONG, *PLONG;		/* 32-bit */
-typedef unsigned int ULONG, *PULONG;	/* 32-bit */
-typedef unsigned int DWORD, *PDWORD;	/* 32-bit */
-typedef unsigned long ULONG_PTR;
-
-typedef const struct comedi_lrange *PCRANGE;
-
-#define LOBYTE(W)	(BYTE)((W) & 0xFF)
-#define HIBYTE(W)	(BYTE)(((W) >> 8) & 0xFF)
-#define MAKEWORD(H, L)	(USHORT)((L) | ((H) << 8))
-#define LOWORD(W)	(USHORT)((W) & 0xFFFF)
-#define HIWORD(W)	(USHORT)(((W) >> 16) & 0xFFFF)
-#define MAKEDWORD(H, L)	(UINT)((L) | ((H) << 16))
+#define LOBYTE(W)	(unsigned char)((W) & 0xFF)
+#define HIBYTE(W)	(unsigned char)(((W) >> 8) & 0xFF)
+#define MAKEWORD(H, L)	(unsigned short)((L) | ((H) << 8))
+#define LOWORD(W)	(unsigned short)((W) & 0xFFFF)
+#define HIWORD(W)	(unsigned short)(((W) >> 16) & 0xFFFF)
+#define MAKEDWORD(H, L)	(unsigned int)((L) | ((H) << 16))
 
 #define ADDI_ENABLE		1
 #define ADDI_DISABLE		0
@@ -75,37 +61,37 @@ typedef const struct comedi_lrange *PCRANGE;
 /* Structures */
 
 /* structure for the boardtype */
-typedef struct {
-	const char *pc_DriverName;	// driver name
-	INT i_VendorId;		//PCI vendor a device ID of card
-	INT i_DeviceId;
-	INT i_IorangeBase0;
-	INT i_IorangeBase1;
-	INT i_IorangeBase2;	//  base 2 range
-	INT i_IorangeBase3;	//  base 3 range
-	INT i_PCIEeprom;	// eeprom present or not
-	char *pc_EepromChip;	// type of chip
-	INT i_NbrAiChannel;	// num of A/D chans
-	INT i_NbrAiChannelDiff;	// num of A/D chans in diff mode
-	INT i_AiChannelList;	// len of chanlist
-	INT i_NbrAoChannel;	// num of D/A chans
-	INT i_AiMaxdata;	// resolution of A/D
-	INT i_AoMaxdata;	// resolution of D/A
-	PCRANGE pr_AiRangelist;	// rangelist for A/D
-	PCRANGE pr_AoRangelist;	// rangelist for D/A
-
-	INT i_NbrDiChannel;	// Number of DI channels
-	INT i_NbrDoChannel;	// Number of DO channels
-	INT i_DoMaxdata;	// data to set all chanels high
-
-	INT i_NbrTTLChannel;	// Number of TTL channels
-	PCRANGE pr_TTLRangelist;	// rangelist for TTL
-
-	INT i_Dma;		// dma present or not
-	INT i_Timer;		//   timer subdevice present or not
-	BYTE b_AvailableConvertUnit;
-	UINT ui_MinAcquisitiontimeNs;	// Minimum Acquisition in Nano secs
-	UINT ui_MinDelaytimeNs;	// Minimum Delay in Nano secs
+struct addi_board {
+	const char *pc_DriverName;	/*  driver name */
+	int i_VendorId;		/* PCI vendor a device ID of card */
+	int i_DeviceId;
+	int i_IorangeBase0;
+	int i_IorangeBase1;
+	int i_IorangeBase2;	/*   base 2 range */
+	int i_IorangeBase3;	/*   base 3 range */
+	int i_PCIEeprom;	/*  eeprom present or not */
+	char *pc_EepromChip;	/*  type of chip */
+	int i_NbrAiChannel;	/*  num of A/D chans */
+	int i_NbrAiChannelDiff;	/*  num of A/D chans in diff mode */
+	int i_AiChannelList;	/*  len of chanlist */
+	int i_NbrAoChannel;	/*  num of D/A chans */
+	int i_AiMaxdata;	/*  resolution of A/D */
+	int i_AoMaxdata;	/*  resolution of D/A */
+        const struct comedi_lrange *pr_AiRangelist;	/* rangelist for A/D */
+        const struct comedi_lrange *pr_AoRangelist;	/* rangelist for D/A */
+
+	int i_NbrDiChannel;	/*  Number of DI channels */
+	int i_NbrDoChannel;	/*  Number of DO channels */
+	int i_DoMaxdata;	/*  data to set all chanels high */
+
+	int i_NbrTTLChannel;	/*  Number of TTL channels */
+	const struct comedi_lrange *pr_TTLRangelist;	/* rangelist for TTL */
+
+	int i_Dma;		/*  dma present or not */
+	int i_Timer;		/*    timer subdevice present or not */
+	unsigned char b_AvailableConvertUnit;
+	unsigned int ui_MinAcquisitiontimeNs;	/*  Minimum Acquisition in Nano secs */
+	unsigned int ui_MinDelaytimeNs;	/*  Minimum Delay in Nano secs */
 
 	/* interrupt and reset */
 	void (*v_hwdrv_Interrupt)(int irq, void *d);
@@ -213,21 +199,21 @@ typedef struct {
 	int (*i_hwdr_WriteTTLIOChlOnOff)(struct comedi_device *dev,
 					 struct comedi_subdevice *s,
 					 struct comedi_insn *insn, unsigned int *data);
-} boardtype;
+};
 
-//MODULE INFO STRUCTURE
+/* MODULE INFO STRUCTURE */
 
-typedef union {
+union str_ModuleInfo {
 	/* Incremental counter infos */
 	struct {
 		union {
 			struct {
-				BYTE b_ModeRegister1;
-				BYTE b_ModeRegister2;
-				BYTE b_ModeRegister3;
-				BYTE b_ModeRegister4;
+				unsigned char b_ModeRegister1;
+				unsigned char b_ModeRegister2;
+				unsigned char b_ModeRegister3;
+				unsigned char b_ModeRegister4;
 			} s_ByteModeRegister;
-			DWORD dw_ModeRegister1_2_3_4;
+			unsigned int dw_ModeRegister1_2_3_4;
 		} s_ModeRegister;
 
 		struct {
@@ -244,25 +230,25 @@ typedef union {
 
 	/* SSI infos */
 	struct {
-		BYTE b_SSIProfile;
-		BYTE b_PositionTurnLength;
-		BYTE b_TurnCptLength;
-		BYTE b_SSIInit;
+		unsigned char b_SSIProfile;
+		unsigned char b_PositionTurnLength;
+		unsigned char b_TurnCptLength;
+		unsigned char b_SSIInit;
 	} s_SSICounterInfo;
 
 	/* TTL I/O infos */
 	struct {
-		BYTE b_TTLInit;
-		BYTE b_PortConfiguration[4];
+		unsigned char b_TTLInit;
+		unsigned char b_PortConfiguration[4];
 	} s_TTLIOInfo;
 
 	/* Digital I/O infos */
 	struct {
-		BYTE b_DigitalInit;
-		BYTE b_ChannelAMode;
-		BYTE b_ChannelBMode;
-		BYTE b_OutputMemoryEnabled;
-		DWORD dw_OutputMemory;
+		unsigned char b_DigitalInit;
+		unsigned char b_ChannelAMode;
+		unsigned char b_ChannelBMode;
+		unsigned char b_OutputMemoryEnabled;
+		unsigned int dw_OutputMemory;
 	} s_DigitalIOInfo;
 
       /*********************/
@@ -271,14 +257,14 @@ typedef union {
 
 	struct {
 		struct {
-			BYTE b_82X54Init;
-			BYTE b_InputClockSelection;
-			BYTE b_InputClockLevel;
-			BYTE b_OutputLevel;
-			BYTE b_HardwareGateLevel;
-			DWORD dw_ConfigurationWord;
+			unsigned char b_82X54Init;
+			unsigned char b_InputClockSelection;
+			unsigned char b_InputClockLevel;
+			unsigned char b_OutputLevel;
+			unsigned char b_HardwareGateLevel;
+			unsigned int dw_ConfigurationWord;
 		} s_82X54TimerInfo[3];
-		BYTE b_InterruptMask;
+		unsigned char b_InterruptMask;
 	} s_82X54ModuleInfo;
 
       /*********************/
@@ -286,13 +272,13 @@ typedef union {
       /*********************/
 
 	struct {
-		BYTE b_ChronoInit;
-		BYTE b_InterruptMask;
-		BYTE b_PCIInputClock;
-		BYTE b_TimingUnit;
-		BYTE b_CycleMode;
+		unsigned char b_ChronoInit;
+		unsigned char b_InterruptMask;
+		unsigned char b_PCIInputClock;
+		unsigned char b_TimingUnit;
+		unsigned char b_CycleMode;
 		double d_TimingInterval;
-		DWORD dw_ConfigReg;
+		unsigned int dw_ConfigReg;
 	} s_ChronoModuleInfo;
 
       /***********************/
@@ -301,154 +287,154 @@ typedef union {
 
 	struct {
 		struct {
-			BYTE b_PulseEncoderInit;
+			unsigned char b_PulseEncoderInit;
 		} s_PulseEncoderInfo[4];
-		DWORD dw_SetRegister;
-		DWORD dw_ControlRegister;
-		DWORD dw_StatusRegister;
+		unsigned int dw_SetRegister;
+		unsigned int dw_ControlRegister;
+		unsigned int dw_StatusRegister;
 	} s_PulseEncoderModuleInfo;
 
 	/* Tor conter infos */
 	struct {
 		struct {
-			BYTE b_TorCounterInit;
-			BYTE b_TimingUnit;
-			BYTE b_InterruptEnable;
+			unsigned char b_TorCounterInit;
+			unsigned char b_TimingUnit;
+			unsigned char b_InterruptEnable;
 			double d_TimingInterval;
-			ULONG ul_RealTimingInterval;
+			unsigned int ul_RealTimingInterval;
 		} s_TorCounterInfo[2];
-		BYTE b_PCIInputClock;
+		unsigned char b_PCIInputClock;
 	} s_TorCounterModuleInfo;
 
 	/* PWM infos */
 	struct {
 		struct {
-			BYTE b_PWMInit;
-			BYTE b_TimingUnit;
-			BYTE b_InterruptEnable;
+			unsigned char b_PWMInit;
+			unsigned char b_TimingUnit;
+			unsigned char b_InterruptEnable;
 			double d_LowTiming;
 			double d_HighTiming;
-			ULONG ul_RealLowTiming;
-			ULONG ul_RealHighTiming;
+			unsigned int ul_RealLowTiming;
+			unsigned int ul_RealHighTiming;
 		} s_PWMInfo[2];
-		BYTE b_ClockSelection;
+		unsigned char b_ClockSelection;
 	} s_PWMModuleInfo;
 
 	/* ETM infos */
 	struct {
 		struct {
-			BYTE b_ETMEnable;
-			BYTE b_ETMInterrupt;
+			unsigned char b_ETMEnable;
+			unsigned char b_ETMInterrupt;
 		} s_ETMInfo[2];
-		BYTE b_ETMInit;
-		BYTE b_TimingUnit;
-		BYTE b_ClockSelection;
+		unsigned char b_ETMInit;
+		unsigned char b_TimingUnit;
+		unsigned char b_ClockSelection;
 		double d_TimingInterval;
-		ULONG ul_Timing;
+		unsigned int ul_Timing;
 	} s_ETMModuleInfo;
 
 	/* CDA infos */
 	struct {
-		BYTE b_CDAEnable;
-		BYTE b_CDAInterrupt;
-		BYTE b_CDAInit;
-		BYTE b_FctSelection;
-		BYTE b_CDAReadFIFOOverflow;
+		unsigned char b_CDAEnable;
+		unsigned char b_CDAInterrupt;
+		unsigned char b_CDAInit;
+		unsigned char b_FctSelection;
+		unsigned char b_CDAReadFIFOOverflow;
 	} s_CDAModuleInfo;
 
-} str_ModuleInfo;
+};
 
 /* Private structure for the addi_apci3120 driver */
-typedef struct {
-
-	INT iobase;
-	INT i_IobaseAmcc;	// base+size for AMCC chip
-	INT i_IobaseAddon;	//addon base address
-	INT i_IobaseReserved;
-	ULONG_PTR dw_AiBase;
-	struct pcilst_struct *amcc;	// ptr too AMCC data
-	BYTE allocated;		// we have blocked card
-	BYTE b_ValidDriver;	// driver is ok
-	BYTE b_AiContinuous;	// we do unlimited AI
-	BYTE b_AiInitialisation;
-	UINT ui_AiActualScan;	//how many scans we finished
-	UINT ui_AiBufferPtr;	// data buffer ptr in samples
-	UINT ui_AiNbrofChannels;	// how many channels is measured
-	UINT ui_AiScanLength;	// Length of actual scanlist
-	UINT ui_AiActualScanPosition;	// position in actual scan
-	PUINT pui_AiChannelList;	// actual chanlist
-	UINT ui_AiChannelList[32];	// actual chanlist
-	BYTE b_AiChannelConfiguration[32];	// actual chanlist
-	UINT ui_AiReadData[32];
-	DWORD dw_AiInitialised;
-	UINT ui_AiTimer0;	//Timer Constant for Timer0
-	UINT ui_AiTimer1;	//Timer constant for Timer1
-	UINT ui_AiFlags;
-	UINT ui_AiDataLength;
-	short *AiData;	// Pointer to sample data
-	UINT ui_AiNbrofScans;	// number of scans to do
-	USHORT us_UseDma;	// To use Dma or not
-	BYTE b_DmaDoubleBuffer;	// we can use double buffering
-	UINT ui_DmaActualBuffer;	// which buffer is used now
-	//*UPDATE-0.7.57->0.7.68
-	//ULONG               ul_DmaBufferVirtual[2];// pointers to begin of DMA buffer
-	short *ul_DmaBufferVirtual[2];	// pointers to begin of DMA buffer
-	ULONG ul_DmaBufferHw[2];	// hw address of DMA buff
-	UINT ui_DmaBufferSize[2];	// size of dma buffer in bytes
-	UINT ui_DmaBufferUsesize[2];	// which size we may now used for transfer
-	UINT ui_DmaBufferSamples[2];	// size in samples
-	UINT ui_DmaBufferPages[2];	// number of pages in buffer
-	BYTE b_DigitalOutputRegister;	// Digital Output Register
-	BYTE b_OutputMemoryStatus;
-	BYTE b_AnalogInputChannelNbr;	// Analog input channel Nbr
-	BYTE b_AnalogOutputChannelNbr;	// Analog input Output  Nbr
-	BYTE b_TimerSelectMode;	// Contain data written at iobase + 0C
-	BYTE b_ModeSelectRegister;	// Contain data written at iobase + 0E
-	USHORT us_OutputRegister;	// Contain data written at iobase + 0
-	BYTE b_InterruptState;
-	BYTE b_TimerInit;	// Specify if InitTimerWatchdog was load
-	BYTE b_TimerStarted;	// Specify if timer 2 is running or not
-	BYTE b_Timer2Mode;	// Specify the timer 2 mode
-	BYTE b_Timer2Interrupt;	//Timer2  interrupt enable or disable
-	BYTE b_AiCyclicAcquisition;	// indicate cyclic acquisition
-	BYTE b_InterruptMode;	// eoc eos or dma
-	BYTE b_EocEosInterrupt;	// Enable disable eoc eos interrupt
-	UINT ui_EocEosConversionTime;
-	BYTE b_EocEosConversionTimeBase;
-	BYTE b_SingelDiff;
-	BYTE b_ExttrigEnable;	/* To enable or disable external trigger */
+struct addi_private {
+
+	int iobase;
+	int i_IobaseAmcc;	/*  base+size for AMCC chip */
+	int i_IobaseAddon;	/* addon base address */
+	int i_IobaseReserved;
+	unsigned long dw_AiBase;
+	struct pcilst_struct *amcc;	/*  ptr too AMCC data */
+	unsigned char allocated;		/*  we have blocked card */
+	unsigned char b_ValidDriver;	/*  driver is ok */
+	unsigned char b_AiContinuous;	/*  we do unlimited AI */
+	unsigned char b_AiInitialisation;
+	unsigned int ui_AiActualScan;	/* how many scans we finished */
+	unsigned int ui_AiBufferPtr;	/*  data buffer ptr in samples */
+	unsigned int ui_AiNbrofChannels;	/*  how many channels is measured */
+	unsigned int ui_AiScanLength;	/*  Length of actual scanlist */
+	unsigned int ui_AiActualScanPosition;	/*  position in actual scan */
+	unsigned int *pui_AiChannelList;	/*  actual chanlist */
+	unsigned int ui_AiChannelList[32];	/*  actual chanlist */
+	unsigned char b_AiChannelConfiguration[32];	/*  actual chanlist */
+	unsigned int ui_AiReadData[32];
+	unsigned int dw_AiInitialised;
+	unsigned int ui_AiTimer0;	/* Timer Constant for Timer0 */
+	unsigned int ui_AiTimer1;	/* Timer constant for Timer1 */
+	unsigned int ui_AiFlags;
+	unsigned int ui_AiDataLength;
+	short *AiData;	/*  Pointer to sample data */
+	unsigned int ui_AiNbrofScans;	/*  number of scans to do */
+	unsigned short us_UseDma;	/*  To use Dma or not */
+	unsigned char b_DmaDoubleBuffer;	/*  we can use double buffering */
+	unsigned int ui_DmaActualBuffer;	/*  which buffer is used now */
+	/* UPDATE-0.7.57->0.7.68 */
+	/* unsigned int               ul_DmaBufferVirtual[2]; pointers to begin of DMA buffer */
+	short *ul_DmaBufferVirtual[2];	/*  pointers to begin of DMA buffer */
+	unsigned int ul_DmaBufferHw[2];	/*  hw address of DMA buff */
+	unsigned int ui_DmaBufferSize[2];	/*  size of dma buffer in bytes */
+	unsigned int ui_DmaBufferUsesize[2];	/*  which size we may now used for transfer */
+	unsigned int ui_DmaBufferSamples[2];	/*  size in samples */
+	unsigned int ui_DmaBufferPages[2];	/*  number of pages in buffer */
+	unsigned char b_DigitalOutputRegister;	/*  Digital Output Register */
+	unsigned char b_OutputMemoryStatus;
+	unsigned char b_AnalogInputChannelNbr;	/*  Analog input channel Nbr */
+	unsigned char b_AnalogOutputChannelNbr;	/*  Analog input Output  Nbr */
+	unsigned char b_TimerSelectMode;	/*  Contain data written at iobase + 0C */
+	unsigned char b_ModeSelectRegister;	/*  Contain data written at iobase + 0E */
+	unsigned short us_OutputRegister;	/*  Contain data written at iobase + 0 */
+	unsigned char b_InterruptState;
+	unsigned char b_TimerInit;	/*  Specify if InitTimerWatchdog was load */
+	unsigned char b_TimerStarted;	/*  Specify if timer 2 is running or not */
+	unsigned char b_Timer2Mode;	/*  Specify the timer 2 mode */
+	unsigned char b_Timer2Interrupt;	/* Timer2  interrupt enable or disable */
+	unsigned char b_AiCyclicAcquisition;	/*  indicate cyclic acquisition */
+	unsigned char b_InterruptMode;	/*  eoc eos or dma */
+	unsigned char b_EocEosInterrupt;	/*  Enable disable eoc eos interrupt */
+	unsigned int ui_EocEosConversionTime;
+	unsigned char b_EocEosConversionTimeBase;
+	unsigned char b_SingelDiff;
+	unsigned char b_ExttrigEnable;	/* To enable or disable external trigger */
 
 	/* Pointer to the current process */
 	struct task_struct *tsk_Current;
-	boardtype *ps_BoardInfo;
+	struct addi_board *ps_BoardInfo;
 
 	/* Hardware board infos for 1710 */
 	struct {
-		UINT ui_Address;	/* Board address */
-		UINT ui_FlashAddress;
-		BYTE b_InterruptNbr;	/* Board interrupt number */
-		BYTE b_SlotNumber;	/* PCI slot number */
-		BYTE b_BoardVersion;
-		DWORD dw_MolduleConfiguration[4];	/* Module config */
+		unsigned int ui_Address;	/* Board address */
+		unsigned int ui_FlashAddress;
+		unsigned char b_InterruptNbr;	/* Board interrupt number */
+		unsigned char b_SlotNumber;	/* PCI slot number */
+		unsigned char b_BoardVersion;
+		unsigned int dw_MolduleConfiguration[4];	/* Module config */
 	} s_BoardInfos;
 
 	/* Interrupt infos */
 	struct {
-		ULONG ul_InterruptOccur;	/* 0   : No interrupt occur */
+		unsigned int ul_InterruptOccur;	/* 0   : No interrupt occur */
 						/* > 0 : Interrupt occur */
-		UINT ui_Read;	/* Read FIFO */
-		UINT ui_Write;	/* Write FIFO */
+		unsigned int ui_Read;	/* Read FIFO */
+		unsigned int ui_Write;	/* Write FIFO */
 		struct {
-			BYTE b_OldModuleMask;
-			ULONG ul_OldInterruptMask;	/* Interrupt mask */
-			ULONG ul_OldCounterLatchValue;	/* Interrupt counter value */
+			unsigned char b_OldModuleMask;
+			unsigned int ul_OldInterruptMask;	/* Interrupt mask */
+			unsigned int ul_OldCounterLatchValue;	/* Interrupt counter value */
 		} s_FIFOInterruptParameters[APCI1710_SAVE_INTERRUPT];
 	} s_InterruptParameters;
 
-	str_ModuleInfo s_ModuleInfo[4];
-	ULONG ul_TTLPortConfiguration[10];
+	union str_ModuleInfo s_ModuleInfo[4];
+	unsigned int ul_TTLPortConfiguration[10];
 
-} addi_private;
+};
 
 static unsigned short pci_list_builded;	/* set to 1 when list of card is known */
 
@@ -457,6 +443,6 @@ static int i_ADDI_Attach(struct comedi_device *dev, struct comedi_devconfig *it)
 static int i_ADDI_Detach(struct comedi_device *dev);
 static int i_ADDI_Reset(struct comedi_device *dev);
 
-static irqreturn_t v_ADDI_Interrupt(int irq, void *d PT_REGS_ARG);
+static irqreturn_t v_ADDI_Interrupt(int irq, void *d);
 static int i_ADDIDATA_InsnReadEeprom(struct comedi_device *dev, struct comedi_subdevice *s,
 				     struct comedi_insn *insn, unsigned int *data);
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c b/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
index a8a1bb2e8fa..69b427390e5 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
@@ -3,13 +3,13 @@
 
 Copyright (C) 2004,2005  ADDI-DATA GmbH for the source code of this module.
 
-        ADDI-DATA GmbH
-        Dieselstrasse 3
-        D-77833 Ottersweier
-        Tel: +19(0)7223/9493-0
-        Fax: +49(0)7223/9493-92
-        http://www.addi-data-com
-        info@addi-data.com
+	ADDI-DATA GmbH
+	Dieselstrasse 3
+	D-77833 Ottersweier
+	Tel: +19(0)7223/9493-0
+	Fax: +49(0)7223/9493-92
+	http://www.addi-data-com
+	info@addi-data.com
 
 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
 
@@ -45,19 +45,11 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
   +----------+-----------+------------------------------------------------+
 */
 
-#define NVCMD_BEGIN_READ 	(0x7 << 5 )	// nvRam begin read command
-#define NVCMD_LOAD_LOW   	(0x4 << 5 )	// nvRam load low command
-#define NVCMD_LOAD_HIGH  	(0x5 << 5 )	// nvRam load high command
-#define EE76_CMD_LEN    	13	// bits in instructions
-#define EE_READ         	0x0180	// 01 1000 0000 read instruction
-
-#define	WORD				unsigned short
-#define PWORD				unsigned short *
-#define PDWORD				unsigned int  *
-
-#ifndef DWORD
-#define	DWORD				unsigned int
-#endif
+#define NVCMD_BEGIN_READ 	(0x7 << 5)	/*  nvRam begin read command */
+#define NVCMD_LOAD_LOW   	(0x4 << 5)	/*  nvRam load low command */
+#define NVCMD_LOAD_HIGH  	(0x5 << 5)	/*  nvRam load high command */
+#define EE76_CMD_LEN    	13	/*  bits in instructions */
+#define EE_READ         	0x0180	/*  01 1000 0000 read instruction */
 
 #define EEPROM_DIGITALINPUT 			0
 #define EEPROM_DIGITALOUTPUT			1
@@ -68,107 +60,114 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 #define EEPROM_TIMER_WATCHDOG_COUNTER	10
 
 struct str_Functionality {
-	BYTE b_Type;
-	WORD w_Address;
+	unsigned char b_Type;
+	unsigned short w_Address;
 };
 
-typedef struct {
-	WORD w_HeaderSize;
-	BYTE b_Nfunctions;
+struct str_MainHeader {
+	unsigned short w_HeaderSize;
+	unsigned char b_Nfunctions;
 	struct str_Functionality s_Functions[7];
-} str_MainHeader;
+};
 
-typedef struct {
-	WORD w_Nchannel;
-	BYTE b_Interruptible;
-	WORD w_NinterruptLogic;
-} str_DigitalInputHeader;
+struct str_DigitalInputHeader {
+	unsigned short w_Nchannel;
+	unsigned char b_Interruptible;
+	unsigned short w_NinterruptLogic;
+};
 
-typedef struct {
-	WORD w_Nchannel;
-} str_DigitalOutputHeader;
+struct str_DigitalOutputHeader {
 
-// used for timer as well as watchdog
+	unsigned short w_Nchannel;
+};
 
-typedef struct {
-	WORD w_HeaderSize;
-	BYTE b_Resolution;
-	BYTE b_Mode;		// in case of Watchdog it is functionality
-	WORD w_MinTiming;
-	BYTE b_TimeBase;
-} str_TimerDetails;
-typedef struct {
 
-	WORD w_Ntimer;
-	str_TimerDetails s_TimerDetails[4];	//  supports 4 timers
-} str_TimerMainHeader;
+/* used for timer as well as watchdog */
+
+struct str_TimerDetails {
+
+	unsigned short w_HeaderSize;
+	unsigned char b_Resolution;
+	unsigned char b_Mode;		/*  in case of Watchdog it is functionality */
+	unsigned short w_MinTiming;
+	unsigned char b_TimeBase;
+};
+
+struct str_TimerMainHeader {
+
+
+	unsigned short w_Ntimer;
+	struct str_TimerDetails s_TimerDetails[4];	/*   supports 4 timers */
+};
+
 
 typedef struct {
-	WORD w_Nchannel;
-	BYTE b_Resolution;
+	unsigned short w_Nchannel;
+	unsigned char b_Resolution;
 } str_AnalogOutputHeader;
 
-typedef struct {
-	WORD w_Nchannel;
-	WORD w_MinConvertTiming;
-	WORD w_MinDelayTiming;
-	BYTE b_HasDma;
-	BYTE b_Resolution;
-} str_AnalogInputHeader;
+struct str_AnalogInputHeader {
+	unsigned short w_Nchannel;
+	unsigned short w_MinConvertTiming;
+	unsigned short w_MinDelayTiming;
+	unsigned char b_HasDma;
+	unsigned char b_Resolution;
+};
+
 
 		/*****************************************/
 		/*            Read Header Functions              */
 		/*****************************************/
 
-INT i_EepromReadMainHeader(WORD w_PCIBoardEepromAddress,
+int i_EepromReadMainHeader(unsigned short w_PCIBoardEepromAddress,
 	char *pc_PCIChipInformation, struct comedi_device *dev);
 
-INT i_EepromReadDigitalInputHeader(WORD w_PCIBoardEepromAddress,
-	char *pc_PCIChipInformation, WORD w_Address,
-	str_DigitalInputHeader * s_Header);
+int i_EepromReadDigitalInputHeader(unsigned short w_PCIBoardEepromAddress,
+	char *pc_PCIChipInformation, unsigned short w_Address,
+	struct str_DigitalInputHeader *s_Header);
 
-INT i_EepromReadDigitalOutputHeader(WORD w_PCIBoardEepromAddress,
-	char *pc_PCIChipInformation, WORD w_Address,
-	str_DigitalOutputHeader * s_Header);
+int i_EepromReadDigitalOutputHeader(unsigned short w_PCIBoardEepromAddress,
+	char *pc_PCIChipInformation, unsigned short w_Address,
+	struct str_DigitalOutputHeader *s_Header);
 
-INT i_EepromReadTimerHeader(WORD w_PCIBoardEepromAddress,
-	char *pc_PCIChipInformation, WORD w_Address,
-	str_TimerMainHeader * s_Header);
+int i_EepromReadTimerHeader(unsigned short w_PCIBoardEepromAddress,
+	char *pc_PCIChipInformation, unsigned short w_Address,
+	struct str_TimerMainHeader *s_Header);
 
-INT i_EepromReadAnlogOutputHeader(WORD w_PCIBoardEepromAddress,
-	char *pc_PCIChipInformation, WORD w_Address,
-	str_AnalogOutputHeader * s_Header);
+int i_EepromReadAnlogOutputHeader(unsigned short w_PCIBoardEepromAddress,
+	char *pc_PCIChipInformation, unsigned short w_Address,
+	str_AnalogOutputHeader *s_Header);
 
-INT i_EepromReadAnlogInputHeader(WORD w_PCIBoardEepromAddress,
-	char *pc_PCIChipInformation, WORD w_Address,
-	str_AnalogInputHeader * s_Header);
+int i_EepromReadAnlogInputHeader(unsigned short w_PCIBoardEepromAddress,
+	char *pc_PCIChipInformation, unsigned short w_Address,
+	struct str_AnalogInputHeader *s_Header);
 
 		/******************************************/
 		/*      Eeprom Specific Functions                         */
 		/******************************************/
-WORD w_EepromReadWord(WORD w_PCIBoardEepromAddress, char *pc_PCIChipInformation,
-	WORD w_EepromStartAddress);
-void v_EepromWaitBusy(WORD w_PCIBoardEepromAddress);
-void v_EepromClock76(DWORD dw_Address, DWORD dw_RegisterValue);
-void v_EepromWaitBusy(WORD w_PCIBoardEepromAddress);
-void v_EepromSendCommand76(DWORD dw_Address, DWORD dw_EepromCommand,
-	BYTE b_DataLengthInBits);
-void v_EepromCs76Read(DWORD dw_Address, WORD w_offset, PWORD pw_Value);
+unsigned short w_EepromReadWord(unsigned short w_PCIBoardEepromAddress, char *pc_PCIChipInformation,
+	unsigned short w_EepromStartAddress);
+void v_EepromWaitBusy(unsigned short w_PCIBoardEepromAddress);
+void v_EepromClock76(unsigned int dw_Address, unsigned int dw_RegisterValue);
+void v_EepromWaitBusy(unsigned short w_PCIBoardEepromAddress);
+void v_EepromSendCommand76(unsigned int dw_Address, unsigned int dw_EepromCommand,
+	unsigned char b_DataLengthInBits);
+void v_EepromCs76Read(unsigned int dw_Address, unsigned short w_offset, unsigned short *pw_Value);
 
 /*
 +----------------------------------------------------------------------------+
-| Function   Name   : WORD w_EepromReadWord                                  |
-|				(WORD	w_PCIBoardEepromAddress,             		 |
+| Function   Name   : unsigned short w_EepromReadWord                                  |
+|				(unsigned short	w_PCIBoardEepromAddress,             		 |
 |				 char *	pc_PCIChipInformation,               		 |
-|				 WORD   w_EepromStartAddress)                		 |
+|				 unsigned short   w_EepromStartAddress)                		 |
 +----------------------------------------------------------------------------+
 | Task              : Read from eepromn a word                               |
 +----------------------------------------------------------------------------+
-| Input Parameters  : WORD w_PCIBoardEepromAddress : PCI eeprom address      |
+| Input Parameters  : unsigned short w_PCIBoardEepromAddress : PCI eeprom address      |
 |																	 |
 |		      char *pc_PCIChipInformation  : PCI Chip Type.          |
 |																	 |
-|		      WORD w_EepromStartAddress    : Selected eeprom address |
+|		      unsigned short w_EepromStartAddress    : Selected eeprom address |
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
 +----------------------------------------------------------------------------+
@@ -176,23 +175,23 @@ void v_EepromCs76Read(DWORD dw_Address, WORD w_offset, PWORD pw_Value);
 +----------------------------------------------------------------------------+
 */
 
-WORD w_EepromReadWord(WORD w_PCIBoardEepromAddress, char *pc_PCIChipInformation,
-	WORD w_EepromStartAddress)
+unsigned short w_EepromReadWord(unsigned short w_PCIBoardEepromAddress, char *pc_PCIChipInformation,
+	unsigned short w_EepromStartAddress)
 {
 
-	BYTE b_Counter = 0;
+	unsigned char b_Counter = 0;
 
-	BYTE b_ReadByte = 0;
+	unsigned char b_ReadByte = 0;
 
-	BYTE b_ReadLowByte = 0;
+	unsigned char b_ReadLowByte = 0;
 
-	BYTE b_ReadHighByte = 0;
+	unsigned char b_ReadHighByte = 0;
 
-	BYTE b_SelectedAddressLow = 0;
+	unsigned char b_SelectedAddressLow = 0;
 
-	BYTE b_SelectedAddressHigh = 0;
+	unsigned char b_SelectedAddressHigh = 0;
 
-	WORD w_ReadWord = 0;
+	unsigned short w_ReadWord = 0;
 
 	/**************************/
 
@@ -207,9 +206,9 @@ WORD w_EepromReadWord(WORD w_PCIBoardEepromAddress, char *pc_PCIChipInformation,
 		for (b_Counter = 0; b_Counter < 2; b_Counter++)
 		{
 
-			b_SelectedAddressLow = (w_EepromStartAddress + b_Counter) % 256;	//Read the low 8 bit part
+			b_SelectedAddressLow = (w_EepromStartAddress + b_Counter) % 256;	/* Read the low 8 bit part */
 
-			b_SelectedAddressHigh = (w_EepromStartAddress + b_Counter) / 256;	//Read the high 8 bit part
+			b_SelectedAddressHigh = (w_EepromStartAddress + b_Counter) / 256;	/* Read the high 8 bit part */
 
 	      /************************************/
 
@@ -320,20 +319,20 @@ WORD w_EepromReadWord(WORD w_PCIBoardEepromAddress, char *pc_PCIChipInformation,
 
 				b_ReadLowByte = b_ReadByte;
 
-			}	// if(b_Counter==0)
+			}	/*  if(b_Counter==0) */
 
 			else
 			{
 
 				b_ReadHighByte = b_ReadByte;
 
-			}	// if(b_Counter==0)
+			}	/*  if(b_Counter==0) */
 
-		}		// for (b_Counter=0; b_Counter<2; b_Counter++)
+		}		/*  for (b_Counter=0; b_Counter<2; b_Counter++) */
 
-		w_ReadWord = (b_ReadLowByte | (((WORD) b_ReadHighByte) * 256));
+		w_ReadWord = (b_ReadLowByte | (((unsigned short) b_ReadHighByte) * 256));
 
-	}			// end of if ((!strcmp(pc_PCIChipInformation, "S5920")) || (!strcmp(pc_PCIChipInformation, "S5933")))
+	}			/*  end of if ((!strcmp(pc_PCIChipInformation, "S5920")) || (!strcmp(pc_PCIChipInformation, "S5933"))) */
 
 	if (!strcmp(pc_PCIChipInformation, "93C76"))
 	{
@@ -349,7 +348,7 @@ WORD w_EepromReadWord(WORD w_PCIBoardEepromAddress, char *pc_PCIChipInformation,
 
 	}
 
-	return (w_ReadWord);
+	return w_ReadWord;
 
 }
 
@@ -359,7 +358,7 @@ WORD w_EepromReadWord(WORD w_PCIBoardEepromAddress, char *pc_PCIChipInformation,
 
 | Function   Name   : void v_EepromWaitBusy                                  |
 
-|			(WORD	w_PCIBoardEepromAddress)                    	 |
+|			(unsigned short	w_PCIBoardEepromAddress)                    	 |
 
 +----------------------------------------------------------------------------+
 
@@ -367,7 +366,7 @@ WORD w_EepromReadWord(WORD w_PCIBoardEepromAddress, char *pc_PCIChipInformation,
 
 +----------------------------------------------------------------------------+
 
-| Input Parameters  : WORD w_PCIBoardEepromAddress : PCI eeprom base address |
+| Input Parameters  : unsigned short w_PCIBoardEepromAddress : PCI eeprom base address |
 
 +----------------------------------------------------------------------------+
 
@@ -381,10 +380,10 @@ WORD w_EepromReadWord(WORD w_PCIBoardEepromAddress, char *pc_PCIChipInformation,
 
 */
 
-void v_EepromWaitBusy(WORD w_PCIBoardEepromAddress)
+void v_EepromWaitBusy(unsigned short w_PCIBoardEepromAddress)
 {
 
-	BYTE b_EepromBusy = 0;
+	unsigned char b_EepromBusy = 0;
 
 	do
 	{
@@ -403,17 +402,16 @@ void v_EepromWaitBusy(WORD w_PCIBoardEepromAddress)
 
 		/*      the operator register is AMCC_OP_REG_MCSR+3 */
 
-		/*      WORD read  EEPROM=0x8000 andAMCC_OP_REG_MCSR+2                  */
+		/*      unsigned short read  EEPROM=0x8000 andAMCC_OP_REG_MCSR+2                  */
 
-		/*      DWORD read  EEPROM=0x80000000 and AMCC_OP_REG_MCSR */
+		/*      unsigned int read  EEPROM=0x80000000 and AMCC_OP_REG_MCSR */
 
 	   /************************************************************************/
 
 		b_EepromBusy = inb(w_PCIBoardEepromAddress + 0x3F);
 		b_EepromBusy = b_EepromBusy & 0x80;
 
-	}
-	while (b_EepromBusy == 0x80);
+	} while (b_EepromBusy == 0x80);
 
 }
 
@@ -421,9 +419,9 @@ void v_EepromWaitBusy(WORD w_PCIBoardEepromAddress)
 
 +---------------------------------------------------------------------------------+
 
-| Function   Name   : void v_EepromClock76(DWORD dw_Address,                      |
+| Function   Name   : void v_EepromClock76(unsigned int dw_Address,                      |
 
-|					   DWORD dw_RegisterValue)                 			  |
+|					   unsigned int dw_RegisterValue)                 			  |
 
 +---------------------------------------------------------------------------------+
 
@@ -431,9 +429,9 @@ void v_EepromWaitBusy(WORD w_PCIBoardEepromAddress)
 
 +---------------------------------------------------------------------------------+
 
-| Input Parameters  : DWORD dw_Address : PCI eeprom base address                  |
+| Input Parameters  : unsigned int dw_Address : PCI eeprom base address                  |
 
-|		      DWORD dw_RegisterValue : PCI eeprom register value to write.|
+|		      unsigned int dw_RegisterValue : PCI eeprom register value to write.|
 
 +---------------------------------------------------------------------------------+
 
@@ -447,7 +445,7 @@ void v_EepromWaitBusy(WORD w_PCIBoardEepromAddress)
 
 */
 
-void v_EepromClock76(DWORD dw_Address, DWORD dw_RegisterValue)
+void v_EepromClock76(unsigned int dw_Address, unsigned int dw_RegisterValue)
 {
 
    /************************/
@@ -488,11 +486,11 @@ void v_EepromClock76(DWORD dw_Address, DWORD dw_RegisterValue)
 
 +---------------------------------------------------------------------------------+
 
-| Function   Name   : void v_EepromSendCommand76(DWORD dw_Address,                |
+| Function   Name   : void v_EepromSendCommand76(unsigned int dw_Address,                |
 
-|					   DWORD   dw_EepromCommand,                		  |
+|					   unsigned int   dw_EepromCommand,                		  |
 
-|					   BYTE    b_DataLengthInBits)                        |
+|					   unsigned char    b_DataLengthInBits)                        |
 
 +---------------------------------------------------------------------------------+
 
@@ -500,11 +498,11 @@ void v_EepromClock76(DWORD dw_Address, DWORD dw_RegisterValue)
 
 +---------------------------------------------------------------------------------+
 
-| Input Parameters  : DWORD dw_Address : PCI eeprom base address                  |
+| Input Parameters  : unsigned int dw_Address : PCI eeprom base address                  |
 
-|		      DWORD dw_EepromCommand : PCI eeprom command to write.       |
+|		      unsigned int dw_EepromCommand : PCI eeprom command to write.       |
 
-|		      BYTE  b_DataLengthInBits : PCI eeprom command data length.  |
+|		      unsigned char  b_DataLengthInBits : PCI eeprom command data length.  |
 
 +---------------------------------------------------------------------------------+
 
@@ -518,13 +516,13 @@ void v_EepromClock76(DWORD dw_Address, DWORD dw_RegisterValue)
 
 */
 
-void v_EepromSendCommand76(DWORD dw_Address, DWORD dw_EepromCommand,
-	BYTE b_DataLengthInBits)
+void v_EepromSendCommand76(unsigned int dw_Address, unsigned int dw_EepromCommand,
+	unsigned char b_DataLengthInBits)
 {
 
 	char c_BitPos = 0;
 
-	DWORD dw_RegisterValue = 0;
+	unsigned int dw_RegisterValue = 0;
 
    /*****************************/
 
@@ -623,11 +621,11 @@ void v_EepromSendCommand76(DWORD dw_Address, DWORD dw_EepromCommand,
 
 +---------------------------------------------------------------------------------+
 
-| Function   Name   : void v_EepromCs76Read(DWORD dw_Address,                     |
+| Function   Name   : void v_EepromCs76Read(unsigned int dw_Address,                     |
 
-|					   WORD    w_offset,                      			  |
+|					   unsigned short    w_offset,                      			  |
 
-|					   PWORD   pw_Value)                      			  |
+|					   unsigned short *   pw_Value)                      			  |
 
 +---------------------------------------------------------------------------------+
 
@@ -635,11 +633,11 @@ void v_EepromSendCommand76(DWORD dw_Address, DWORD dw_EepromCommand,
 
 +---------------------------------------------------------------------------------+
 
-| Input Parameters  : DWORD dw_Address : PCI eeprom base address                  |
+| Input Parameters  : unsigned int dw_Address : PCI eeprom base address                  |
 
-|		      WORD    w_offset : Offset of the adress to read             |
+|		      unsigned short    w_offset : Offset of the adress to read             |
 
-|		      PWORD   pw_Value : PCI eeprom 16 bit read value.            |
+|		      unsigned short *   pw_Value : PCI eeprom 16 bit read value.            |
 
 +---------------------------------------------------------------------------------+
 
@@ -653,14 +651,14 @@ void v_EepromSendCommand76(DWORD dw_Address, DWORD dw_EepromCommand,
 
 */
 
-void v_EepromCs76Read(DWORD dw_Address, WORD w_offset, PWORD pw_Value)
+void v_EepromCs76Read(unsigned int dw_Address, unsigned short w_offset, unsigned short *pw_Value)
 {
 
         char c_BitPos = 0;
 
-	DWORD dw_RegisterValue = 0;
+	unsigned int dw_RegisterValue = 0;
 
-	DWORD dw_RegisterValueRead = 0;
+	unsigned int dw_RegisterValueRead = 0;
 
    /*************************************************/
 
@@ -786,12 +784,12 @@ void v_EepromCs76Read(DWORD dw_Address, WORD w_offset, PWORD pw_Value)
 
 /*
 +----------------------------------------------------------------------------+
-| Function Name  : INT i_EepromReadMainHeader(WORD w_PCIBoardEepromAddress,  |
+| Function Name  : int i_EepromReadMainHeader(unsigned short w_PCIBoardEepromAddress,  |
 |				char *	pc_PCIChipInformation,struct comedi_device *dev)    |
 +----------------------------------------------------------------------------+
 | Task              : Read from eeprom Main Header                           |
 +----------------------------------------------------------------------------+
-| Input Parameters  : WORD w_PCIBoardEepromAddress : PCI eeprom address      |
+| Input Parameters  : unsigned short w_PCIBoardEepromAddress : PCI eeprom address      |
 |																	 |
 |		      char *pc_PCIChipInformation  : PCI Chip Type.          |
 |																	 |
@@ -804,43 +802,43 @@ void v_EepromCs76Read(DWORD dw_Address, WORD w_offset, PWORD pw_Value)
 +----------------------------------------------------------------------------+
 */
 
-INT i_EepromReadMainHeader(WORD w_PCIBoardEepromAddress,
+int i_EepromReadMainHeader(unsigned short w_PCIBoardEepromAddress,
 	char *pc_PCIChipInformation, struct comedi_device *dev)
 {
-	WORD w_Temp, i, w_Count = 0;
-	UINT ui_Temp;
-	str_MainHeader s_MainHeader;
-	str_DigitalInputHeader s_DigitalInputHeader;
-	str_DigitalOutputHeader s_DigitalOutputHeader;
-	//str_TimerMainHeader     s_TimerMainHeader,s_WatchdogMainHeader;
+	unsigned short w_Temp, i, w_Count = 0;
+	unsigned int ui_Temp;
+	struct str_MainHeader s_MainHeader;
+	struct str_DigitalInputHeader s_DigitalInputHeader;
+	struct str_DigitalOutputHeader s_DigitalOutputHeader;
+	/* struct str_TimerMainHeader     s_TimerMainHeader,s_WatchdogMainHeader; */
 	str_AnalogOutputHeader s_AnalogOutputHeader;
-	str_AnalogInputHeader s_AnalogInputHeader;
+	struct str_AnalogInputHeader s_AnalogInputHeader;
 
-	// Read size
+	/* Read size */
 	s_MainHeader.w_HeaderSize =
 		w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation,
 		0x100 + 8);
 
-	// Read nbr of functionality
+	/* Read nbr of functionality */
 	w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
 		pc_PCIChipInformation, 0x100 + 10);
-	s_MainHeader.b_Nfunctions = (BYTE) w_Temp & 0x00FF;
+	s_MainHeader.b_Nfunctions = (unsigned char) w_Temp & 0x00FF;
 
-	// Read functionality details
+	/* Read functionality details */
 	for (i = 0; i < s_MainHeader.b_Nfunctions; i++) {
-		// Read Type
+		/* Read Type */
 		w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
 			pc_PCIChipInformation, 0x100 + 12 + w_Count);
-		s_MainHeader.s_Functions[i].b_Type = (BYTE) w_Temp & 0x3F;
+		s_MainHeader.s_Functions[i].b_Type = (unsigned char) w_Temp & 0x3F;
 		w_Count = w_Count + 2;
-		//Read Address
+		/* Read Address */
 		s_MainHeader.s_Functions[i].w_Address =
 			w_EepromReadWord(w_PCIBoardEepromAddress,
 			pc_PCIChipInformation, 0x100 + 12 + w_Count);
 		w_Count = w_Count + 2;
 	}
 
-	// Display main header info
+	/* Display main header info */
 	for (i = 0; i < s_MainHeader.b_Nfunctions; i++) {
 
 		switch (s_MainHeader.s_Functions[i].b_Type) {
@@ -878,10 +876,10 @@ INT i_EepromReadMainHeader(WORD w_PCIBoardEepromAddress,
 					s_AnalogInputHeader.w_Nchannel;
 			this_board->i_Dma = s_AnalogInputHeader.b_HasDma;
 			this_board->ui_MinAcquisitiontimeNs =
-				(UINT) s_AnalogInputHeader.w_MinConvertTiming *
+				(unsigned int) s_AnalogInputHeader.w_MinConvertTiming *
 				1000;
 			this_board->ui_MinDelaytimeNs =
-				(UINT) s_AnalogInputHeader.w_MinDelayTiming *
+				(unsigned int) s_AnalogInputHeader.w_MinDelayTiming *
 				1000;
 			ui_Temp = 0xffff;
 			this_board->i_AiMaxdata =
@@ -903,15 +901,15 @@ INT i_EepromReadMainHeader(WORD w_PCIBoardEepromAddress,
 			break;
 
 		case EEPROM_TIMER:
-			this_board->i_Timer = 1;	//Timer subdevice present
+			this_board->i_Timer = 1;	/* Timer subdevice present */
 			break;
 
 		case EEPROM_WATCHDOG:
-			this_board->i_Timer = 1;	//Timer subdevice present
+			this_board->i_Timer = 1;	/* Timer subdevice present */
 			break;
 
 		case EEPROM_TIMER_WATCHDOG_COUNTER:
-			this_board->i_Timer = 1;	//Timer subdevice present
+			this_board->i_Timer = 1;	/* Timer subdevice present */
 		}
 	}
 
@@ -920,18 +918,18 @@ INT i_EepromReadMainHeader(WORD w_PCIBoardEepromAddress,
 
 /*
 +----------------------------------------------------------------------------+
-| Function Name  : INT i_EepromReadDigitalInputHeader(WORD 					 |
+| Function Name  : int i_EepromReadDigitalInputHeader(unsigned short 					 |
 |			w_PCIBoardEepromAddress,char *pc_PCIChipInformation,	 |
-|			WORD w_Address,str_DigitalInputHeader *s_Header)		 |
+|			unsigned short w_Address,struct str_DigitalInputHeader *s_Header)		 |
 |																	 |
 +----------------------------------------------------------------------------+
 | Task              : Read Digital Input Header                              |
 +----------------------------------------------------------------------------+
-| Input Parameters  : WORD w_PCIBoardEepromAddress : PCI eeprom address      |
+| Input Parameters  : unsigned short w_PCIBoardEepromAddress : PCI eeprom address      |
 |																	 |
 |		      char *pc_PCIChipInformation  : PCI Chip Type.          |
 |																	 |
-|			 str_DigitalInputHeader *s_Header: Digita Input Header   |
+|			 struct str_DigitalInputHeader *s_Header: Digita Input Header   |
 |												   Pointer			 |
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
@@ -939,23 +937,23 @@ INT i_EepromReadMainHeader(WORD w_PCIBoardEepromAddress,
 | Return Value      : 0							                             |
 +----------------------------------------------------------------------------+
 */
-INT i_EepromReadDigitalInputHeader(WORD w_PCIBoardEepromAddress,
-	char *pc_PCIChipInformation, WORD w_Address,
-	str_DigitalInputHeader * s_Header)
+int i_EepromReadDigitalInputHeader(unsigned short w_PCIBoardEepromAddress,
+	char *pc_PCIChipInformation, unsigned short w_Address,
+	struct str_DigitalInputHeader *s_Header)
 {
-	WORD w_Temp;
+	unsigned short w_Temp;
 
-	// read nbr of channels
+	/*  read nbr of channels */
 	s_Header->w_Nchannel =
 		w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation,
 		0x100 + w_Address + 6);
 
-	// interruptible or not
+	/*  interruptible or not */
 	w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
 		pc_PCIChipInformation, 0x100 + w_Address + 8);
-	s_Header->b_Interruptible = (BYTE) (w_Temp >> 7) & 0x01;
+	s_Header->b_Interruptible = (unsigned char) (w_Temp >> 7) & 0x01;
 
-// How many interruptible logic
+/* How many interruptible logic */
 	s_Header->w_NinterruptLogic =
 		w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation,
 		0x100 + w_Address + 10);
@@ -965,18 +963,18 @@ INT i_EepromReadDigitalInputHeader(WORD w_PCIBoardEepromAddress,
 
 /*
 +----------------------------------------------------------------------------+
-| Function Name  : INT i_EepromReadDigitalOutputHeader(WORD 				 |
+| Function Name  : int i_EepromReadDigitalOutputHeader(unsigned short 				 |
 |			w_PCIBoardEepromAddress,char *pc_PCIChipInformation,	 |
-|			WORD w_Address,str_DigitalOutputHeader *s_Header)	     |
+|			unsigned short w_Address,struct str_DigitalOutputHeader *s_Header)	     |
 |																	 |
 +----------------------------------------------------------------------------+
 | Task              : Read Digital Output Header                             |
 +----------------------------------------------------------------------------+
-| Input Parameters  : WORD w_PCIBoardEepromAddress : PCI eeprom address      |
+| Input Parameters  : unsigned short w_PCIBoardEepromAddress : PCI eeprom address      |
 |																	 |
 |		      char *pc_PCIChipInformation  : PCI Chip Type.          |
 |																	 |
-|			 str_DigitalOutputHeader *s_Header: Digital Output Header|
+|			 struct str_DigitalOutputHeader *s_Header: Digital Output Header|
 |											   Pointer				 |
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
@@ -984,11 +982,11 @@ INT i_EepromReadDigitalInputHeader(WORD w_PCIBoardEepromAddress,
 | Return Value      : 0							                             |
 +----------------------------------------------------------------------------+
 */
-INT i_EepromReadDigitalOutputHeader(WORD w_PCIBoardEepromAddress,
-	char *pc_PCIChipInformation, WORD w_Address,
-	str_DigitalOutputHeader * s_Header)
+int i_EepromReadDigitalOutputHeader(unsigned short w_PCIBoardEepromAddress,
+	char *pc_PCIChipInformation, unsigned short w_Address,
+	struct str_DigitalOutputHeader *s_Header)
 {
-// Read Nbr channels
+/* Read Nbr channels */
 	s_Header->w_Nchannel =
 		w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation,
 		0x100 + w_Address + 6);
@@ -997,17 +995,17 @@ INT i_EepromReadDigitalOutputHeader(WORD w_PCIBoardEepromAddress,
 
 /*
 +----------------------------------------------------------------------------+
-| Function Name  : INT i_EepromReadTimerHeader(WORD w_PCIBoardEepromAddress, |
+| Function Name  : int i_EepromReadTimerHeader(unsigned short w_PCIBoardEepromAddress, |
 |			char *pc_PCIChipInformation,WORD w_Address,				 |
-|			str_TimerMainHeader *s_Header)							 |
+|			struct str_TimerMainHeader *s_Header)							 |
 +----------------------------------------------------------------------------+
 | Task              : Read Timer or Watchdog Header                          |
 +----------------------------------------------------------------------------+
-| Input Parameters  : WORD w_PCIBoardEepromAddress : PCI eeprom address      |
+| Input Parameters  : unsigned short w_PCIBoardEepromAddress : PCI eeprom address      |
 |																	 |
 |		      char *pc_PCIChipInformation  : PCI Chip Type.          |
 |																	 |
-|			 str_TimerMainHeader *s_Header: Timer Header			 |
+|			 struct str_TimerMainHeader *s_Header: Timer Header			 |
 |											   Pointer				 |
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
@@ -1015,18 +1013,18 @@ INT i_EepromReadDigitalOutputHeader(WORD w_PCIBoardEepromAddress,
 | Return Value      : 0							                             |
 +----------------------------------------------------------------------------+
 */
-INT i_EepromReadTimerHeader(WORD w_PCIBoardEepromAddress,
-	char *pc_PCIChipInformation, WORD w_Address,
-	str_TimerMainHeader * s_Header)
+int i_EepromReadTimerHeader(unsigned short w_PCIBoardEepromAddress,
+	char *pc_PCIChipInformation, unsigned short w_Address,
+	struct str_TimerMainHeader *s_Header)
 {
 
-	WORD i, w_Size = 0, w_Temp;
+	unsigned short i, w_Size = 0, w_Temp;
 
-//Read No of Timer
+/* Read No of Timer */
 	s_Header->w_Ntimer =
 		w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation,
 		0x100 + w_Address + 6);
-//Read header size
+/* Read header size */
 
 	for (i = 0; i < s_Header->w_Ntimer; i++) {
 		s_Header->s_TimerDetails[i].w_HeaderSize =
@@ -1037,23 +1035,23 @@ INT i_EepromReadTimerHeader(WORD w_PCIBoardEepromAddress,
 			pc_PCIChipInformation,
 			0x100 + w_Address + 8 + w_Size + 2);
 
-		//Read Resolution
+		/* Read Resolution */
 		s_Header->s_TimerDetails[i].b_Resolution =
-			(BYTE) (w_Temp >> 10) & 0x3F;
+			(unsigned char) (w_Temp >> 10) & 0x3F;
 
-		//Read Mode
+		/* Read Mode */
 		s_Header->s_TimerDetails[i].b_Mode =
-			(BYTE) (w_Temp >> 4) & 0x3F;
+			(unsigned char) (w_Temp >> 4) & 0x3F;
 
 		w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
 			pc_PCIChipInformation,
 			0x100 + w_Address + 8 + w_Size + 4);
 
-		//Read MinTiming
+		/* Read MinTiming */
 		s_Header->s_TimerDetails[i].w_MinTiming = (w_Temp >> 6) & 0x3FF;
 
-		//Read Timebase
-		s_Header->s_TimerDetails[i].b_TimeBase = (BYTE) (w_Temp) & 0x3F;
+		/* Read Timebase */
+		s_Header->s_TimerDetails[i].b_TimeBase = (unsigned char) (w_Temp) & 0x3F;
 		w_Size += s_Header->s_TimerDetails[i].w_HeaderSize;
 	}
 
@@ -1062,13 +1060,13 @@ INT i_EepromReadTimerHeader(WORD w_PCIBoardEepromAddress,
 
 /*
 +----------------------------------------------------------------------------+
-| Function Name  : INT i_EepromReadAnlogOutputHeader(WORD 					 |
+| Function Name  : int i_EepromReadAnlogOutputHeader(unsigned short 					 |
 |			w_PCIBoardEepromAddress,char *pc_PCIChipInformation,	 |
-|			WORD w_Address,str_AnalogOutputHeader *s_Header)         |
+|			unsigned short w_Address,str_AnalogOutputHeader *s_Header)         |
 +----------------------------------------------------------------------------+
 | Task              : Read Nalog Output  Header                              |
 +----------------------------------------------------------------------------+
-| Input Parameters  : WORD w_PCIBoardEepromAddress : PCI eeprom address      |
+| Input Parameters  : unsigned short w_PCIBoardEepromAddress : PCI eeprom address      |
 |																	 |
 |		      char *pc_PCIChipInformation  : PCI Chip Type.          |
 |																	 |
@@ -1081,35 +1079,35 @@ INT i_EepromReadTimerHeader(WORD w_PCIBoardEepromAddress,
 +----------------------------------------------------------------------------+
 */
 
-INT i_EepromReadAnlogOutputHeader(WORD w_PCIBoardEepromAddress,
-	char *pc_PCIChipInformation, WORD w_Address,
-	str_AnalogOutputHeader * s_Header)
+int i_EepromReadAnlogOutputHeader(unsigned short w_PCIBoardEepromAddress,
+	char *pc_PCIChipInformation, unsigned short w_Address,
+	str_AnalogOutputHeader *s_Header)
 {
-	WORD w_Temp;
-	// No of channels for 1st hard component
+	unsigned short w_Temp;
+	/*  No of channels for 1st hard component */
 	w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
 		pc_PCIChipInformation, 0x100 + w_Address + 10);
 	s_Header->w_Nchannel = (w_Temp >> 4) & 0x03FF;
-	// Resolution for 1st hard component
+	/*  Resolution for 1st hard component */
 	w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
 		pc_PCIChipInformation, 0x100 + w_Address + 16);
-	s_Header->b_Resolution = (BYTE) (w_Temp >> 8) & 0xFF;
+	s_Header->b_Resolution = (unsigned char) (w_Temp >> 8) & 0xFF;
 	return 0;
 }
 
 /*
 +----------------------------------------------------------------------------+
-| Function Name  : INT i_EepromReadAnlogInputHeader(WORD 					 |
+| Function Name  : int i_EepromReadAnlogInputHeader(unsigned short 					 |
 |			w_PCIBoardEepromAddress,char *pc_PCIChipInformation,     |
-|			WORD w_Address,str_AnalogInputHeader *s_Header)          |
+|			unsigned short w_Address,struct str_AnalogInputHeader *s_Header)          |
 +----------------------------------------------------------------------------+
 | Task              : Read Nalog Output  Header                              |
 +----------------------------------------------------------------------------+
-| Input Parameters  : WORD w_PCIBoardEepromAddress : PCI eeprom address      |
+| Input Parameters  : unsigned short w_PCIBoardEepromAddress : PCI eeprom address      |
 |																	 |
 |		      char *pc_PCIChipInformation  : PCI Chip Type.          |
 |																	 |
-|			 str_AnalogInputHeader *s_Header:Anlog Input Header      |
+|			 struct str_AnalogInputHeader *s_Header:Anlog Input Header      |
 |											   Pointer				 |
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
@@ -1118,12 +1116,12 @@ INT i_EepromReadAnlogOutputHeader(WORD w_PCIBoardEepromAddress,
 +----------------------------------------------------------------------------+
 */
 
-// Reads only for ONE  hardware component
-INT i_EepromReadAnlogInputHeader(WORD w_PCIBoardEepromAddress,
-	char *pc_PCIChipInformation, WORD w_Address,
-	str_AnalogInputHeader * s_Header)
+/* Reads only for ONE  hardware component */
+int i_EepromReadAnlogInputHeader(unsigned short w_PCIBoardEepromAddress,
+	char *pc_PCIChipInformation, unsigned short w_Address,
+	struct str_AnalogInputHeader *s_Header)
 {
-	WORD w_Temp, w_Offset;
+	unsigned short w_Temp, w_Offset;
 	w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
 		pc_PCIChipInformation, 0x100 + w_Address + 10);
 	s_Header->w_Nchannel = (w_Temp >> 4) & 0x03FF;
@@ -1135,24 +1133,24 @@ INT i_EepromReadAnlogInputHeader(WORD w_PCIBoardEepromAddress,
 		0x100 + w_Address + 30);
 	w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
 		pc_PCIChipInformation, 0x100 + w_Address + 20);
-	s_Header->b_HasDma = (w_Temp >> 13) & 0x01;	// whether dma present or not
+	s_Header->b_HasDma = (w_Temp >> 13) & 0x01;	/*  whether dma present or not */
 
-	w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation, 0x100 + w_Address + 72);	// reading Y
+	w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation, 0x100 + w_Address + 72);	/*  reading Y */
 	w_Temp = w_Temp & 0x00FF;
-	if (w_Temp)		//Y>0
+	if (w_Temp)		/* Y>0 */
 	{
-		w_Offset = 74 + (2 * w_Temp) + (10 * (1 + (w_Temp / 16)));	// offset of first analog input single header
-		w_Offset = w_Offset + 2;	// resolution
-	} else			//Y=0
+		w_Offset = 74 + (2 * w_Temp) + (10 * (1 + (w_Temp / 16)));	/*  offset of first analog input single header */
+		w_Offset = w_Offset + 2;	/*  resolution */
+	} else			/* Y=0 */
 	{
 		w_Offset = 74;
-		w_Offset = w_Offset + 2;	// resolution
+		w_Offset = w_Offset + 2;	/*  resolution */
 	}
 
-// read Resolution
+/* read Resolution */
 	w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
 		pc_PCIChipInformation, 0x100 + w_Address + w_Offset);
-	s_Header->b_Resolution = w_Temp & 0x001F;	// last 5 bits
+	s_Header->b_Resolution = w_Temp & 0x001F;	/*  last 5 bits */
 
 	return 0;
 }
diff --git a/drivers/staging/comedi/drivers/addi-data/amcc_s5933_58.h b/drivers/staging/comedi/drivers/addi-data/amcc_s5933_58.h
index 617dc087dcb..b76f877f250 100644
--- a/drivers/staging/comedi/drivers/addi-data/amcc_s5933_58.h
+++ b/drivers/staging/comedi/drivers/addi-data/amcc_s5933_58.h
@@ -31,15 +31,15 @@
 
 *************************/
 
-#define FIFO_ADVANCE_ON_BYTE_2     0x20000000	// written on base0
+#define FIFO_ADVANCE_ON_BYTE_2     0x20000000	/*  written on base0 */
 
-#define AMWEN_ENABLE                     0x02	// added for step 6 dma written on base2
+#define AMWEN_ENABLE                     0x02	/*  added for step 6 dma written on base2 */
 #define A2P_FIFO_WRITE_ENABLE            0x01
 
-#define AGCSTS_TC_ENABLE		   0x10000000	// Added for transfer count enable bit
+#define AGCSTS_TC_ENABLE		   0x10000000	/*  Added for transfer count enable bit */
 
-//  ADDON RELATED ADDITIONS
-// Constant
+/* ADDON RELATED ADDITIONS */
+/* Constant */
 #define     APCI3120_ENABLE_TRANSFER_ADD_ON_LOW       0x00
 #define     APCI3120_ENABLE_TRANSFER_ADD_ON_HIGH      0x1200
 #define     APCI3120_A2P_FIFO_MANAGEMENT              0x04000400L
@@ -52,7 +52,7 @@
 #define     APCI3120_DISABLE_BUS_MASTER_ADD_ON        0x0
 #define     APCI3120_DISABLE_BUS_MASTER_PCI           0x0
 
- // ADD_ON ::: this needed since apci supports 16 bit interface to add on
+ /*  ADD_ON ::: this needed since apci supports 16 bit interface to add on */
 #define     APCI3120_ADD_ON_AGCSTS_LOW       0x3C
 #define     APCI3120_ADD_ON_AGCSTS_HIGH      APCI3120_ADD_ON_AGCSTS_LOW + 2
 #define     APCI3120_ADD_ON_MWAR_LOW         0x24
@@ -60,7 +60,7 @@
 #define     APCI3120_ADD_ON_MWTC_LOW         0x058
 #define     APCI3120_ADD_ON_MWTC_HIGH        APCI3120_ADD_ON_MWTC_LOW + 2
 
-// AMCC
+/* AMCC */
 #define     APCI3120_AMCC_OP_MCSR            0x3C
 #define     APCI3120_AMCC_OP_REG_INTCSR      0x38
 
@@ -85,7 +85,7 @@
 #define AMCC_OP_REG_MRTC         0x30
 #define AMCC_OP_REG_MBEF         0x34
 #define AMCC_OP_REG_INTCSR       0x38
-#define  AMCC_OP_REG_INTCSR_SRC  (AMCC_OP_REG_INTCSR + 2)	/* INT source */
+#define  AMCC_OP_REG_INTCSR_SRC  (AMCC_OP_REG_INTCSR + 2)	/* int source */
 #define  AMCC_OP_REG_INTCSR_FEC  (AMCC_OP_REG_INTCSR + 3)	/* FIFO ctrl */
 #define AMCC_OP_REG_MCSR         0x3c
 #define  AMCC_OP_REG_MCSR_NVDATA (AMCC_OP_REG_MCSR + 2)	/* Data in byte 2 */
@@ -212,7 +212,7 @@ struct pcilst_struct {
 	unsigned int irq;
 };
 
-struct pcilst_struct *amcc_devices;	// ptr to root list of all amcc devices
+struct pcilst_struct *amcc_devices;	/*  ptr to root list of all amcc devices */
 
 /****************************************************************************/
 
@@ -267,7 +267,7 @@ void v_pci_card_list_init(unsigned short pci_vendor, char display)
 			amcc->vendor = pcidev->vendor;
 			amcc->device = pcidev->device;
 #if 0
-			amcc->master = pcidev->master;	// how get this information under 2.4 kernels?
+			amcc->master = pcidev->master;	/*  how get this information under 2.4 kernels? */
 #endif
 			amcc->pci_bus = pcidev->bus->number;
 			amcc->pci_slot = PCI_SLOT(pcidev->devfn);
@@ -333,17 +333,17 @@ int i_find_free_pci_card_by_position(unsigned short vendor_id,
 		    && (amcc->pci_slot == pci_slot)) {
 			if (!(amcc->used)) {
 				*card = amcc;
-				return 0;	// ok, card is found
+				return 0;	/*  ok, card is found */
 			} else {
-				rt_printk
+				printk
 				    (" - \nCard on requested position is used b:s %d:%d!\n",
 				     pci_bus, pci_slot);
-				return 2;	// card exist but is used
+				return 2;	/*  card exist but is used */
 			}
 		}
 	}
 
-	return 1;		// no card found
+	return 1;		/*  no card found */
 }
 
 /****************************************************************************/
@@ -422,11 +422,10 @@ struct pcilst_struct *ptr_select_and_alloc_pci_card(unsigned short vendor_id,
 {
 	struct pcilst_struct *card;
 
-	if ((pci_bus < 1) & (pci_slot < 1)) {	// use autodetection
-		if ((card = ptr_find_free_pci_card_by_device(vendor_id,
-							     device_id)) ==
-		    NULL) {
-			rt_printk(" - Unused card not found in system!\n");
+	if ((pci_bus < 1) & (pci_slot < 1)) {	/*  use autodetection */
+		card = ptr_find_free_pci_card_by_device(vendor_id, device_id);
+		if (card == NULL) {
+			printk(" - Unused card not found in system!\n");
 			return NULL;
 		}
 	} else {
@@ -434,12 +433,12 @@ struct pcilst_struct *ptr_select_and_alloc_pci_card(unsigned short vendor_id,
 							 pci_bus, pci_slot,
 							 &card)) {
 		case 1:
-			rt_printk
+			printk
 			    (" - Card not found on requested position b:s %d:%d!\n",
 			     pci_bus, pci_slot);
 			return NULL;
 		case 2:
-			rt_printk
+			printk
 			    (" - Card on requested position is used b:s %d:%d!\n",
 			     pci_bus, pci_slot);
 			return NULL;
@@ -447,7 +446,7 @@ struct pcilst_struct *ptr_select_and_alloc_pci_card(unsigned short vendor_id,
 	}
 
 	if (i_pci_card_alloc(card) != 0) {
-		rt_printk(" - Can't allocate card!\n");
+		printk(" - Can't allocate card!\n");
 		return NULL;
 	}
 
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.c
index 3f8929c0907..47517a938ec 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.c
@@ -1,15 +1,15 @@
-/**
+//**
 @verbatim
 
 Copyright (C) 2004,2005  ADDI-DATA GmbH for the source code of this module.
 
-        ADDI-DATA GmbH
-        Dieselstrasse 3
-        D-77833 Ottersweier
-        Tel: +19(0)7223/9493-0
-        Fax: +49(0)7223/9493-92
-        http://www.addi-data-com
-        info@addi-data.com
+	ADDI-DATA GmbH
+	Dieselstrasse 3
+	D-77833 Ottersweier
+	Tel: +19(0)7223/9493-0
+	Fax: +49(0)7223/9493-92
+	http://www.addi-data-com
+	info@addi-data.com
 
 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
 
@@ -56,21 +56,22 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 #include "APCI1710_Pwm.c"
 #include "APCI1710_INCCPT.c"
 
-void i_ADDI_AttachPCI1710(struct comedi_device * dev)
+void i_ADDI_AttachPCI1710(struct comedi_device *dev)
 {
 	struct comedi_subdevice *s;
 	int ret = 0;
 	int n_subdevices = 9;
 
-	//Update-0.7.57->0.7.68dev->n_subdevices = 9;
-	if ((ret = alloc_subdevices(dev, n_subdevices)) < 0)
+	/* Update-0.7.57->0.7.68dev->n_subdevices = 9; */
+	ret = alloc_subdevices(dev, n_subdevices);
+	if (ret < 0)
 		return;
 
-	// Allocate and Initialise Timer Subdevice Structures
+	/*  Allocate and Initialise Timer Subdevice Structures */
 	s = dev->subdevices + 0;
 
 	s->type = COMEDI_SUBD_TIMER;
-	s->subdev_flags = SDF_WRITEABLE | SDF_RT | SDF_GROUND | SDF_COMMON;
+	s->subdev_flags = SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
 	s->n_chan = 3;
 	s->maxdata = 0;
 	s->len_chanlist = 3;
@@ -80,12 +81,12 @@ void i_ADDI_AttachPCI1710(struct comedi_device * dev)
 	s->insn_config = i_APCI1710_InsnConfigInitTimer;
 	s->insn_bits = i_APCI1710_InsnBitsTimer;
 
-	// Allocate and Initialise DIO Subdevice Structures
+	/*  Allocate and Initialise DIO Subdevice Structures */
 	s = dev->subdevices + 1;
 
 	s->type = COMEDI_SUBD_DIO;
 	s->subdev_flags =
-		SDF_WRITEABLE | SDF_READABLE | SDF_RT | SDF_GROUND | SDF_COMMON;
+		SDF_WRITEABLE | SDF_READABLE | SDF_GROUND | SDF_COMMON;
 	s->n_chan = 7;
 	s->maxdata = 1;
 	s->len_chanlist = 7;
@@ -95,11 +96,11 @@ void i_ADDI_AttachPCI1710(struct comedi_device * dev)
 	s->insn_bits = i_APCI1710_InsnBitsDigitalIOPortOnOff;
 	s->insn_write = i_APCI1710_InsnWriteDigitalIOChlOnOff;
 
-	// Allocate and Initialise Chrono Subdevice Structures
+	/*  Allocate and Initialise Chrono Subdevice Structures */
 	s = dev->subdevices + 2;
 
 	s->type = COMEDI_SUBD_CHRONO;
-	s->subdev_flags = SDF_WRITEABLE | SDF_RT | SDF_GROUND | SDF_COMMON;
+	s->subdev_flags = SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
 	s->n_chan = 4;
 	s->maxdata = 0;
 	s->len_chanlist = 4;
@@ -109,55 +110,55 @@ void i_ADDI_AttachPCI1710(struct comedi_device * dev)
 	s->insn_config = i_APCI1710_InsnConfigInitChrono;
 	s->insn_bits = i_APCI1710_InsnBitsChronoDigitalIO;
 
-	// Allocate and Initialise PWM Subdevice Structures
+	/*  Allocate and Initialise PWM Subdevice Structures */
 	s = dev->subdevices + 3;
 	s->type = COMEDI_SUBD_PWM;
 	s->subdev_flags =
-		SDF_WRITEABLE | SDF_READABLE | SDF_RT | SDF_GROUND | SDF_COMMON;
+		SDF_WRITEABLE | SDF_READABLE | SDF_GROUND | SDF_COMMON;
 	s->n_chan = 3;
 	s->maxdata = 1;
 	s->len_chanlist = 3;
 	s->range_table = &range_digital;
-	s->io_bits = 0;		//all bits input
+	s->io_bits = 0;		/* all bits input */
 	s->insn_config = i_APCI1710_InsnConfigPWM;
 	s->insn_read = i_APCI1710_InsnReadGetPWMStatus;
 	s->insn_write = i_APCI1710_InsnWritePWM;
 	s->insn_bits = i_APCI1710_InsnBitsReadPWMInterrupt;
 
-	// Allocate and Initialise TTLIO Subdevice Structures
+	/*  Allocate and Initialise TTLIO Subdevice Structures */
 	s = dev->subdevices + 4;
 	s->type = COMEDI_SUBD_TTLIO;
 	s->subdev_flags =
-		SDF_WRITEABLE | SDF_READABLE | SDF_RT | SDF_GROUND | SDF_COMMON;
+		SDF_WRITEABLE | SDF_READABLE | SDF_GROUND | SDF_COMMON;
 	s->n_chan = 8;
 	s->maxdata = 1;
 	s->len_chanlist = 8;
-	s->range_table = &range_apci1710_ttl;	// to pass arguments in range
+	s->range_table = &range_apci1710_ttl;	/*  to pass arguments in range */
 	s->insn_config = i_APCI1710_InsnConfigInitTTLIO;
 	s->insn_bits = i_APCI1710_InsnBitsReadTTLIO;
 	s->insn_write = i_APCI1710_InsnWriteSetTTLIOChlOnOff;
 	s->insn_read = i_APCI1710_InsnReadTTLIOAllPortValue;
 
-	// Allocate and Initialise TOR Subdevice Structures
+	/*  Allocate and Initialise TOR Subdevice Structures */
 	s = dev->subdevices + 5;
 	s->type = COMEDI_SUBD_TOR;
 	s->subdev_flags =
-		SDF_WRITEABLE | SDF_READABLE | SDF_RT | SDF_GROUND | SDF_COMMON;
+		SDF_WRITEABLE | SDF_READABLE | SDF_GROUND | SDF_COMMON;
 	s->n_chan = 8;
 	s->maxdata = 1;
 	s->len_chanlist = 8;
 	s->range_table = &range_digital;
-	s->io_bits = 0;		//all bits input
+	s->io_bits = 0;		/* all bits input */
 	s->insn_config = i_APCI1710_InsnConfigInitTorCounter;
 	s->insn_read = i_APCI1710_InsnReadGetTorCounterInitialisation;
 	s->insn_write = i_APCI1710_InsnWriteEnableDisableTorCounter;
 	s->insn_bits = i_APCI1710_InsnBitsGetTorCounterProgressStatusAndValue;
 
-	// Allocate and Initialise SSI Subdevice Structures
+	/*  Allocate and Initialise SSI Subdevice Structures */
 	s = dev->subdevices + 6;
 	s->type = COMEDI_SUBD_SSI;
 	s->subdev_flags =
-		SDF_WRITEABLE | SDF_READABLE | SDF_RT | SDF_GROUND | SDF_COMMON;
+		SDF_WRITEABLE | SDF_READABLE | SDF_GROUND | SDF_COMMON;
 	s->n_chan = 4;
 	s->maxdata = 1;
 	s->len_chanlist = 4;
@@ -166,11 +167,11 @@ void i_ADDI_AttachPCI1710(struct comedi_device * dev)
 	s->insn_read = i_APCI1710_InsnReadSSIValue;
 	s->insn_bits = i_APCI1710_InsnBitsSSIDigitalIO;
 
-	// Allocate and Initialise PULSEENCODER Subdevice Structures
+	/*  Allocate and Initialise PULSEENCODER Subdevice Structures */
 	s = dev->subdevices + 7;
 	s->type = COMEDI_SUBD_PULSEENCODER;
 	s->subdev_flags =
-		SDF_WRITEABLE | SDF_READABLE | SDF_RT | SDF_GROUND | SDF_COMMON;
+		SDF_WRITEABLE | SDF_READABLE | SDF_GROUND | SDF_COMMON;
 	s->n_chan = 4;
 	s->maxdata = 1;
 	s->len_chanlist = 4;
@@ -180,11 +181,11 @@ void i_ADDI_AttachPCI1710(struct comedi_device * dev)
 	s->insn_bits = i_APCI1710_InsnBitsReadWritePulseEncoder;
 	s->insn_read = i_APCI1710_InsnReadInterruptPulseEncoder;
 
-	// Allocate and Initialise INCREMENTALCOUNTER Subdevice Structures
+	/*  Allocate and Initialise INCREMENTALCOUNTER Subdevice Structures */
 	s = dev->subdevices + 8;
 	s->type = COMEDI_SUBD_INCREMENTALCOUNTER;
 	s->subdev_flags =
-		SDF_WRITEABLE | SDF_READABLE | SDF_RT | SDF_GROUND | SDF_COMMON;
+		SDF_WRITEABLE | SDF_READABLE | SDF_GROUND | SDF_COMMON;
 	s->n_chan = 500;
 	s->maxdata = 1;
 	s->len_chanlist = 500;
@@ -195,14 +196,14 @@ void i_ADDI_AttachPCI1710(struct comedi_device * dev)
 	s->insn_bits = i_APCI1710_InsnBitsINCCPT;
 }
 
-int i_APCI1710_Reset(struct comedi_device * dev);
+int i_APCI1710_Reset(struct comedi_device *dev);
 void v_APCI1710_Interrupt(int irq, void *d);
-//for 1710
+/* for 1710 */
 
-int i_APCI1710_Reset(struct comedi_device * dev)
+int i_APCI1710_Reset(struct comedi_device *dev)
 {
 	int ret;
-	DWORD dw_Dummy;
+	unsigned int dw_Dummy;
 
 	/*********************************/
 	/* Read all module configuration */
@@ -219,12 +220,12 @@ int i_APCI1710_Reset(struct comedi_device * dev)
 	ret = inl(devpriv->s_BoardInfos.ui_Address + 252);
 	devpriv->s_BoardInfos.dw_MolduleConfiguration[3] = ret;
 
-	// outl(0x80808082,devpriv->s_BoardInfos.ui_Address+0x60);
+	/*  outl(0x80808082,devpriv->s_BoardInfos.ui_Address+0x60); */
 	outl(0x83838383, devpriv->s_BoardInfos.ui_Address + 0x60);
 
 	devpriv->s_BoardInfos.b_BoardVersion = 1;
 
-	// Enable the interrupt for the controler
+	/*  Enable the interrupt for the controler */
 	dw_Dummy = inl(devpriv->s_BoardInfos.ui_Address + 0x38);
 	outl(dw_Dummy | 0x2000, devpriv->s_BoardInfos.ui_Address + 0x38);
 
@@ -234,11 +235,11 @@ int i_APCI1710_Reset(struct comedi_device * dev)
 /*
 +----------------------------------------------------------------------------+
 | Function's Name   : __void__ v_APCI1710_InterruptFunction                  |
-|				(BYTE b_Interrupt, __CPPARGS)                |
+|				(unsigned char b_Interrupt, __CPPARGS)                |
 +----------------------------------------------------------------------------+
 | Task              : APCI-1710 interrupt function                           |
 +----------------------------------------------------------------------------+
-| Input Parameters  : BYTE b_Interrupt : Interrupt number                    |
+| Input Parameters  : unsigned char b_Interrupt : Interrupt number                    |
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
 +----------------------------------------------------------------------------+
@@ -250,18 +251,18 @@ int i_APCI1710_Reset(struct comedi_device * dev)
 void v_APCI1710_Interrupt(int irq, void *d)
 {
 	struct comedi_device *dev = d;
-	BYTE b_ModuleCpt = 0;
-	BYTE b_InterruptFlag = 0;
-	BYTE b_PWMCpt = 0;
-	BYTE b_TorCounterCpt = 0;
-	BYTE b_PulseIncoderCpt = 0;
-	UINT ui_16BitValue;
-	ULONG ul_InterruptLatchReg = 0;
-	ULONG ul_LatchRegisterValue = 0;
-	ULONG ul_82X54InterruptStatus;
-	ULONG ul_StatusRegister;
-
-	str_ModuleInfo *ps_ModuleInfo;
+	unsigned char b_ModuleCpt = 0;
+	unsigned char b_InterruptFlag = 0;
+	unsigned char b_PWMCpt = 0;
+	unsigned char b_TorCounterCpt = 0;
+	unsigned char b_PulseIncoderCpt = 0;
+	unsigned int ui_16BitValue;
+	unsigned int ul_InterruptLatchReg = 0;
+	unsigned int ul_LatchRegisterValue = 0;
+	unsigned int ul_82X54InterruptStatus;
+	unsigned int ul_StatusRegister;
+
+	union str_ModuleInfo *ps_ModuleInfo;
 
 	printk("APCI1710 Interrupt\n");
 	for (b_ModuleCpt = 0; b_ModuleCpt < 4; b_ModuleCpt++, ps_ModuleInfo++) {
@@ -279,7 +280,7 @@ void v_APCI1710_Interrupt(int irq, void *d)
 				dw_MolduleConfiguration[b_ModuleCpt] &
 				0xFFFF0000UL) == APCI1710_82X54_TIMER) {
 
-			//printk("TIMER Interrupt Occurred\n");
+			/* printk("TIMER Interrupt Occurred\n"); */
 			ul_82X54InterruptStatus = inl(devpriv->s_BoardInfos.
 				ui_Address + 12 + (64 * b_ModuleCpt));
 
@@ -332,11 +333,11 @@ void v_APCI1710_Interrupt(int irq, void *d)
 			     /**********************/
 				/* Call user function */
 			     /**********************/
-				//Send a signal to from kernel to user space
+				/* Send a signal to from kernel to user space */
 				send_sig(SIGIO, devpriv->tsk_Current, 0);
 
-			}	// if ((ul_82X54InterruptStatus & 0x7) != 0)
-		}		// 82X54 timer
+			}	/*  if ((ul_82X54InterruptStatus & 0x7) != 0) */
+		}		/*  82X54 timer */
 
 		 /***************************/
 		/* Test if increm. counter */
@@ -412,7 +413,7 @@ void v_APCI1710_Interrupt(int irq, void *d)
 				/**********************/
 					/* Call user function */
 				/**********************/
-					//Send a signal to from kernel to user space
+					/* Send a signal to from kernel to user space */
 					send_sig(SIGIO, devpriv->tsk_Current,
 						0);
 
@@ -473,7 +474,7 @@ void v_APCI1710_Interrupt(int irq, void *d)
 			    /**********************/
 					/* Call user function */
 				/**********************/
-					//Send a signal to from kernel to user space
+					/* Send a signal to from kernel to user space */
 					send_sig(SIGIO, devpriv->tsk_Current,
 						0);
 
@@ -562,7 +563,7 @@ void v_APCI1710_Interrupt(int irq, void *d)
 				/**********************/
 					/* Call user function */
 				/**********************/
-					//Send a signal to from kernel to user space
+					/* Send a signal to from kernel to user space */
 					send_sig(SIGIO, devpriv->tsk_Current,
 						0);
 
@@ -628,7 +629,7 @@ void v_APCI1710_Interrupt(int irq, void *d)
 				/**********************/
 					/* Call user function */
 				/**********************/
-					//Send a signal to from kernel to user space
+					/* Send a signal to from kernel to user space */
 					send_sig(SIGIO, devpriv->tsk_Current,
 						0);
 
@@ -675,7 +676,7 @@ void v_APCI1710_Interrupt(int irq, void *d)
 						if ((ul_LatchRegisterValue &
 								0xFFFFU) != 0) {
 							ui_16BitValue =
-								(UINT)
+								(unsigned int)
 								ul_LatchRegisterValue
 								& 0xFFFFU;
 							ul_LatchRegisterValue =
@@ -693,7 +694,7 @@ void v_APCI1710_Interrupt(int irq, void *d)
 								0xFFFF0000UL) !=
 							0) {
 							ui_16BitValue =
-								(UINT) (
+								(unsigned int) (
 								(ul_LatchRegisterValue
 									>> 16) &
 								0xFFFFU);
@@ -721,7 +722,7 @@ void v_APCI1710_Interrupt(int irq, void *d)
 					if ((ul_LatchRegisterValue &
 							0xFFFF0000UL) != 0) {
 						ui_16BitValue =
-							(UINT) (
+							(unsigned int) (
 							(ul_LatchRegisterValue
 								>> 16) &
 							0xFFFFU);
@@ -741,7 +742,7 @@ void v_APCI1710_Interrupt(int irq, void *d)
 					if ((ul_LatchRegisterValue & 0xFFFFU) !=
 						0) {
 						ui_16BitValue =
-							(UINT)
+							(unsigned int)
 							ul_LatchRegisterValue &
 							0xFFFFU;
 						ul_LatchRegisterValue =
@@ -795,11 +796,11 @@ void v_APCI1710_Interrupt(int irq, void *d)
 			     /**********************/
 				/* Call user function */
 			     /**********************/
-				//Send a signal to from kernel to user space
+				/* Send a signal to from kernel to user space */
 				send_sig(SIGIO, devpriv->tsk_Current, 0);
 
 			}
-		}		// Incremental counter
+		}		/*  Incremental counter */
 
 		 /***************/
 		/* Test if CDA */
@@ -870,14 +871,14 @@ void v_APCI1710_Interrupt(int irq, void *d)
 					/* Call user function */
 				/**********************/
 
-					//Send a signal to from kernel to user space
+					/* Send a signal to from kernel to user space */
 					send_sig(SIGIO, devpriv->tsk_Current,
 						0);
 
-				}	// if (ul_StatusRegister & 1)
+				}	/*  if (ul_StatusRegister & 1) */
 
 			}
-		}		// CDA
+		}		/*  CDA */
 
 		 /***********************/
 		/* Test if PWM counter */
@@ -950,15 +951,15 @@ void v_APCI1710_Interrupt(int irq, void *d)
 				   /**********************/
 						/* Call user function */
 				   /**********************/
-						//Send a signal to from kernel to user space
+						/* Send a signal to from kernel to user space */
 						send_sig(SIGIO,
 							devpriv->tsk_Current,
 							0);
 
-					}	// if (ul_StatusRegister & 0x1)
-				}	// if (APCI1710_ENABLE)
-			}	// for (b_PWMCpt == 0; b_PWMCpt < 0; b_PWMCpt ++)
-		}		// PWM counter
+					}	/*  if (ul_StatusRegister & 0x1) */
+				}	/*  if (APCI1710_ENABLE) */
+			}	/*  for (b_PWMCpt == 0; b_PWMCpt < 0; b_PWMCpt ++) */
+		}		/*  PWM counter */
 
 		 /***********************/
 		/* Test if tor counter */
@@ -1054,14 +1055,14 @@ void v_APCI1710_Interrupt(int irq, void *d)
 						/* Call user function */
 				   /**********************/
 
-						//Send a signal to from kernel to user space
+						/* Send a signal to from kernel to user space */
 						send_sig(SIGIO,
 							devpriv->tsk_Current,
 							0);
-					}	// if (ul_StatusRegister & 0x1)
-				}	// if (APCI1710_ENABLE)
-			}	// for (b_TorCounterCpt == 0; b_TorCounterCpt < 0; b_TorCounterCpt ++)
-		}		// Tor counter
+					}	/*  if (ul_StatusRegister & 0x1) */
+				}	/*  if (APCI1710_ENABLE) */
+			}	/*  for (b_TorCounterCpt == 0; b_TorCounterCpt < 0; b_TorCounterCpt ++) */
+		}		/*  Tor counter */
 
 		 /***********************/
 		/* Test if chronometer */
@@ -1071,7 +1072,7 @@ void v_APCI1710_Interrupt(int irq, void *d)
 				dw_MolduleConfiguration[b_ModuleCpt] &
 				0xFFFF0000UL) == APCI1710_CHRONOMETER) {
 
-			//printk("APCI1710 Chrono Interrupt\n");
+			/* printk("APCI1710 Chrono Interrupt\n"); */
 		    /*****************************/
 			/* Read the interrupt status */
 		    /*****************************/
@@ -1163,13 +1164,13 @@ void v_APCI1710_Interrupt(int irq, void *d)
 				/**********************/
 					/* Call user function */
 				/**********************/
-					//Send a signal to from kernel to user space
+					/* Send a signal to from kernel to user space */
 					send_sig(SIGIO, devpriv->tsk_Current,
 						0);
 
 				}
 			}
-		}		// Chronometer
+		}		/*  Chronometer */
 
 		 /*************************/
 		/* Test if pulse encoder */
@@ -1249,7 +1250,7 @@ void v_APCI1710_Interrupt(int irq, void *d)
 				   /**********************/
 						/* Call user function */
 				   /**********************/
-						//Send a signal to from kernel to user space
+						/* Send a signal to from kernel to user space */
 						send_sig(SIGIO,
 							devpriv->tsk_Current,
 							0);
@@ -1257,7 +1258,7 @@ void v_APCI1710_Interrupt(int irq, void *d)
 					}
 				}
 			}
-		}		//pulse encoder
+		}		/* pulse encoder */
 
 	}
 	return;
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.h
index 998cbba8afe..22b3e569ecd 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.h
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.h
@@ -44,7 +44,7 @@
 #define APCI1710_SYNCHRONOUS_MODE	1
 #define APCI1710_ASYNCHRONOUS_MODE	0
 
-//MODULE INFO STRUCTURE
+/* MODULE INFO STRUCTURE */
 
 static const struct comedi_lrange range_apci1710_ttl = { 4, {
 						      BIP_RANGE(10),
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c
index e4527926c2d..016721efdbf 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c
@@ -3,13 +3,13 @@
 
 Copyright (C) 2004,2005  ADDI-DATA GmbH for the source code of this module.
 
-        ADDI-DATA GmbH
-        Dieselstrasse 3
-        D-77833 Ottersweier
-        Tel: +19(0)7223/9493-0
-        Fax: +49(0)7223/9493-92
-        http://www.addi-data-com
-        info@addi-data.com
+	ADDI-DATA GmbH
+	Dieselstrasse 3
+	D-77833 Ottersweier
+	Tel: +19(0)7223/9493-0
+	Fax: +49(0)7223/9493-92
+	http://www.addi-data-com
+	info@addi-data.com
 
 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
 
@@ -52,9 +52,9 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 +----------------------------------------------------------------------------+
 */
 #include "hwdrv_apci035.h"
-INT i_WatchdogNbr = 0;
-INT i_Temp = 0;
-INT i_Flag = 1;
+int i_WatchdogNbr = 0;
+int i_Temp = 0;
+int i_Flag = 1;
 /*
 +----------------------------------------------------------------------------+
 | Function   Name   : int i_APCI035_ConfigTimerWatchdog                      |
@@ -64,42 +64,42 @@ INT i_Flag = 1;
 | Task              : Configures The Timer , Counter or Watchdog             |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev : Driver handle                     |
-|                     UINT *data         : Data Pointer contains             |
+|                     unsigned int *data         : Data Pointer contains             |
 |                                          configuration parameters as below |
 |                                                                            |
 |					  data[0]            : 0 Configure As Timer      |
 |										   1 Configure As Watchdog   |
-                              data[1]            : Watchdog number
+|                                         data[1]            : Watchdog number
 |					  data[2]            : Time base Unit            |
 |					  data[3]			 : Reload Value			     |
-                              data[4]            : External Trigger          |
-                                                   1:Enable
-                                                   0:Disable
-                              data[5]            :External Trigger Level
-                                                  00 Trigger Disabled
-                                                  01 Trigger Enabled (Low level)
-                                                  10 Trigger Enabled (High Level)
-                                                  11 Trigger Enabled (High/Low level)
-                              data[6]            : External Gate            |
-                                                   1:Enable
-                                                   0:Disable
-                              data[7]            : External Gate level
-                                                  00 Gate Disabled
-                                                  01 Gate Enabled (Low level)
-                                                  10 Gate Enabled (High Level)
-                              data[8]            :Warning Relay
-                                                  1: ENABLE
-                                                  0: DISABLE
-                              data[9]            :Warning Delay available
-                              data[10]           :Warning Relay Time unit
-                              data[11]           :Warning Relay Time Reload value
-                              data[12]           :Reset Relay
-                                                  1 : ENABLE
-                                                  0 : DISABLE
-                              data[13]           :Interrupt
-                                                  1 : ENABLE
-                                                  0 : DISABLE
-
+|                                         data[4]            : External Trigger          |
+|                                                              1:Enable
+|                                                           0:Disable
+|                              data[5]            :External Trigger Level
+|                                                  00 Trigger Disabled
+|                                                  01 Trigger Enabled (Low level)
+|                                                  10 Trigger Enabled (High Level)
+|                                                  11 Trigger Enabled (High/Low level)
+|                              data[6]            : External Gate            |
+|                                                   1:Enable
+|                                                   0:Disable
+|                              data[7]            : External Gate level
+|                                                  00 Gate Disabled
+|                                                  01 Gate Enabled (Low level)
+|                                                  10 Gate Enabled (High Level)
+|                              data[8]            :Warning Relay
+|                                                  1: ENABLE
+|                                                  0: DISABLE
+|                              data[9]            :Warning Delay available
+|                              data[10]           :Warning Relay Time unit
+|                              data[11]           :Warning Relay Time Reload value
+|                              data[12]           :Reset Relay
+|                                                  1 : ENABLE
+|                                                  0 : DISABLE
+|                              data[13]           :Interrupt
+|                                                  1 : ENABLE
+|                                                  0 : DISABLE
+|
 |
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
@@ -109,12 +109,12 @@ INT i_Flag = 1;
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-INT i_APCI035_ConfigTimerWatchdog(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI035_ConfigTimerWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_Status = 0;
-	UINT ui_Command = 0;
-	UINT ui_Mode = 0;
+	unsigned int ui_Status = 0;
+	unsigned int ui_Command = 0;
+	unsigned int ui_Mode = 0;
 	i_Temp = 0;
 	devpriv->tsk_Current = current;
 	devpriv->b_TimerSelectMode = data[0];
@@ -124,9 +124,9 @@ INT i_APCI035_ConfigTimerWatchdog(struct comedi_device * dev, struct comedi_subd
 	} else {
 		ui_Mode = 0;
 	}
-//ui_Command = inl(devpriv->iobase+((i_WatchdogNbr-1)*32)+12);
+/* ui_Command = inl(devpriv->iobase+((i_WatchdogNbr-1)*32)+12); */
 	ui_Command = 0;
-//ui_Command = ui_Command & 0xFFFFF9FEUL;
+/* ui_Command = ui_Command & 0xFFFFF9FEUL; */
 	outl(ui_Command, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
 	ui_Command = 0;
 	ui_Command = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
@@ -153,7 +153,7 @@ INT i_APCI035_ConfigTimerWatchdog(struct comedi_device * dev, struct comedi_subd
 		ui_Command =
 			(ui_Command & 0xFFF719E2UL) | ui_Mode << 13UL | 0x10UL;
 
-	}			//if (data[0] == ADDIDATA_TIMER)
+	}			/* if (data[0] == ADDIDATA_TIMER) */
 	else {
 		if (data[0] == ADDIDATA_WATCHDOG) {
 
@@ -260,7 +260,7 @@ INT i_APCI035_ConfigTimerWatchdog(struct comedi_device * dev, struct comedi_subd
 | Task              : Start / Stop The Selected Timer , or Watchdog  |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev : Driver handle                     |
-|                     UINT *data         : Data Pointer contains             |
+|                     unsigned int *data         : Data Pointer contains             |
 |                                          configuration parameters as below |
 |					                                                 |
 |					  data[0] : 0 - Stop Selected Timer/Watchdog     |
@@ -278,11 +278,11 @@ INT i_APCI035_ConfigTimerWatchdog(struct comedi_device * dev, struct comedi_subd
 |					                                                 |
 +----------------------------------------------------------------------------+
 */
-INT i_APCI035_StartStopWriteTimerWatchdog(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI035_StartStopWriteTimerWatchdog(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_Command = 0;
-	INT i_Count = 0;
+	unsigned int ui_Command = 0;
+	int i_Count = 0;
 	if (data[0] == 1) {
 		ui_Command =
 			inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
@@ -292,7 +292,7 @@ INT i_APCI035_StartStopWriteTimerWatchdog(struct comedi_device * dev,
 		ui_Command = (ui_Command & 0xFFFFF9FFUL) | 0x1UL;
 		outl(ui_Command,
 			devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
-	}			// if  (data[0]==1)
+	}			/*  if  (data[0]==1) */
 	if (data[0] == 2) {
 		ui_Command =
 			inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
@@ -304,16 +304,18 @@ INT i_APCI035_StartStopWriteTimerWatchdog(struct comedi_device * dev,
 			devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
 	}
 
-	if (data[0] == 0)	//Stop The Watchdog
+	if (data[0] == 0)	/* Stop The Watchdog */
 	{
-		//Stop The Watchdog
+		/* Stop The Watchdog */
 		ui_Command = 0;
-		//ui_Command = inl(devpriv->iobase+((i_WatchdogNbr-1)*32)+12);
-		//ui_Command = ui_Command & 0xFFFFF9FEUL;
+/*
+* ui_Command = inl(devpriv->iobase+((i_WatchdogNbr-1)*32)+12);
+* ui_Command = ui_Command & 0xFFFFF9FEUL;
+*/
 		outl(ui_Command,
 			devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
-	}			//  if (data[1]==0)
-	if (data[0] == 3)	//stop all Watchdogs
+	}			/*   if (data[1]==0) */
+	if (data[0] == 3)	/* stop all Watchdogs */
 	{
 		ui_Command = 0;
 		for (i_Count = 1; i_Count <= 4; i_Count++) {
@@ -329,7 +331,7 @@ INT i_APCI035_StartStopWriteTimerWatchdog(struct comedi_device * dev,
 		}
 
 	}
-	if (data[0] == 4)	//start all Watchdogs
+	if (data[0] == 4)	/* start all Watchdogs */
 	{
 		ui_Command = 0;
 		for (i_Count = 1; i_Count <= 4; i_Count++) {
@@ -344,7 +346,7 @@ INT i_APCI035_StartStopWriteTimerWatchdog(struct comedi_device * dev,
 				0);
 		}
 	}
-	if (data[0] == 5)	//trigger all Watchdogs
+	if (data[0] == 5)	/* trigger all Watchdogs */
 	{
 		ui_Command = 0;
 		for (i_Count = 1; i_Count <= 4; i_Count++) {
@@ -373,17 +375,17 @@ INT i_APCI035_StartStopWriteTimerWatchdog(struct comedi_device * dev,
 | Task              : Read The Selected Timer , Counter or Watchdog          |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev : Driver handle                     |
-|                     UINT *data         : Data Pointer contains             |
+|                     unsigned int *data         : Data Pointer contains             |
 |                                          configuration parameters as below |
 |                                                                            |
 |     																	 |
 +----------------------------------------------------------------------------+
 | Output Parameters :	data[0]            : software trigger status
-              data[1]            : hardware trigger status
-|     				data[2]            : Software clear status
-                        data[3]            : Overflow status
-                     data[4]            : Timer actual value
-
+|                       data[1]            : hardware trigger status
+|     	  	        data[2]            : Software clear status
+|                       data[3]            : Overflow status
+|                       data[4]            : Timer actual value
+|
 
 +----------------------------------------------------------------------------+
 | Return Value      : TRUE  : No error occur                                 |
@@ -391,42 +393,46 @@ INT i_APCI035_StartStopWriteTimerWatchdog(struct comedi_device * dev,
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-INT i_APCI035_ReadTimerWatchdog(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI035_ReadTimerWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_Status = 0;	// Status register
+	unsigned int ui_Status = 0;	/*  Status register */
 	i_WatchdogNbr = insn->unused[0];
-	      /******************/
+
+	/******************/
 	/* Get the status */
-	      /******************/
+	/******************/
+
 	ui_Status = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 16);
-      /***********************************/
+
+	/***********************************/
 	/* Get the software trigger status */
-      /***********************************/
+	/***********************************/
+
 	data[0] = ((ui_Status >> 1) & 1);
-      /***********************************/
+	/***********************************/
 	/* Get the hardware trigger status */
-      /***********************************/
+	/***********************************/
 	data[1] = ((ui_Status >> 2) & 1);
-      /*********************************/
+	/*********************************/
 	/* Get the software clear status */
-      /*********************************/
+	/*********************************/
 	data[2] = ((ui_Status >> 3) & 1);
-      /***************************/
+	/***************************/
 	/* Get the overflow status */
-      /***************************/
+	/***************************/
 	data[3] = ((ui_Status >> 0) & 1);
 	if (devpriv->b_TimerSelectMode == ADDIDATA_TIMER) {
 		data[4] = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 0);
 
-	}			//  if  (devpriv->b_TimerSelectMode==ADDIDATA_TIMER)
+	}			/*   if  (devpriv->b_TimerSelectMode==ADDIDATA_TIMER) */
 
 	return insn->n;
 }
 
 /*
 +----------------------------------------------------------------------------+
-| Function   Name   : INT i_APCI035_ConfigAnalogInput                        |
+| Function   Name   : int i_APCI035_ConfigAnalogInput                        |
 |			  (struct comedi_device *dev,struct comedi_subdevice *s,               |
 |                      struct comedi_insn *insn,unsigned int *data)                     |
 +----------------------------------------------------------------------------+
@@ -447,8 +453,8 @@ INT i_APCI035_ReadTimerWatchdog(struct comedi_device * dev, struct comedi_subdev
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-INT i_APCI035_ConfigAnalogInput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI035_ConfigAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	devpriv->tsk_Current = current;
 	outl(0x200 | 0, devpriv->iobase + 128 + 0x4);
@@ -472,8 +478,8 @@ INT i_APCI035_ConfigAnalogInput(struct comedi_device * dev, struct comedi_subdev
 | Task              : Read  value  of the selected channel			         |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev      : Driver handle                |
-|                     UINT ui_NoOfChannels    : No Of Channels To read       |
-|                     UINT *data              : Data Pointer to read status  |
+|                     unsigned int ui_NoOfChannels    : No Of Channels To read       |
+|                     unsigned int *data              : Data Pointer to read status  |
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
 |			          data[0]  : Digital Value Of Input              |
@@ -484,10 +490,10 @@ INT i_APCI035_ConfigAnalogInput(struct comedi_device * dev, struct comedi_subdev
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-INT i_APCI035_ReadAnalogInput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI035_ReadAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_CommandRegister = 0;
+	unsigned int ui_CommandRegister = 0;
 /******************/
 /*  Set the start */
 /******************/
@@ -519,14 +525,14 @@ INT i_APCI035_ReadAnalogInput(struct comedi_device * dev, struct comedi_subdevic
 |			                                                                 |
 +----------------------------------------------------------------------------+
 */
-INT i_APCI035_Reset(struct comedi_device * dev)
+int i_APCI035_Reset(struct comedi_device *dev)
 {
-	INT i_Count = 0;
+	int i_Count = 0;
 	for (i_Count = 1; i_Count <= 4; i_Count++) {
 		i_WatchdogNbr = i_Count;
-		outl(0x0, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 0);	//stop all timers
+		outl(0x0, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 0);	/* stop all timers */
 	}
-	outl(0x0, devpriv->iobase + 128 + 12);	//Disable the warning delay
+	outl(0x0, devpriv->iobase + 128 + 12);	/* Disable the warning delay */
 
 	return 0;
 }
@@ -551,11 +557,11 @@ INT i_APCI035_Reset(struct comedi_device * dev)
 static void v_APCI035_Interrupt(int irq, void *d)
 {
 	struct comedi_device *dev = d;
-	UINT ui_StatusRegister1 = 0;
-	UINT ui_StatusRegister2 = 0;
-	UINT ui_ReadCommand = 0;
-	UINT ui_ChannelNumber = 0;
-	UINT ui_DigitalTemperature = 0;
+	unsigned int ui_StatusRegister1 = 0;
+	unsigned int ui_StatusRegister2 = 0;
+	unsigned int ui_ReadCommand = 0;
+	unsigned int ui_ChannelNumber = 0;
+	unsigned int ui_DigitalTemperature = 0;
 	if (i_Temp == 1) {
 		i_WatchdogNbr = i_Flag;
 		i_Flag = i_Flag + 1;
@@ -571,7 +577,7 @@ static void v_APCI035_Interrupt(int irq, void *d)
 	ui_StatusRegister2 =
 		inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 20);
 
-	if ((((ui_StatusRegister1) & 0x8) == 0x8))	//Test if warning relay interrupt
+	if ((((ui_StatusRegister1) & 0x8) == 0x8))	/* Test if warning relay interrupt */
 	{
 	/**********************************/
 		/* Disable the temperature warning */
@@ -587,14 +593,14 @@ static void v_APCI035_Interrupt(int irq, void *d)
 		/* Read the digital temperature value */
 	/**************************************/
 		ui_DigitalTemperature = inl(devpriv->iobase + 128 + 60);
-		send_sig(SIGIO, devpriv->tsk_Current, 0);	// send signal to the sample
-	}			//if (((ui_StatusRegister1 & 0x8) == 0x8))
+		send_sig(SIGIO, devpriv->tsk_Current, 0);	/*  send signal to the sample */
+	}			/* if (((ui_StatusRegister1 & 0x8) == 0x8)) */
 
 	else {
 		if ((ui_StatusRegister2 & 0x1) == 0x1) {
-			send_sig(SIGIO, devpriv->tsk_Current, 0);	// send signal to the sample
+			send_sig(SIGIO, devpriv->tsk_Current, 0);	/*  send signal to the sample */
 		}
-	}			//else if (((ui_StatusRegister1 & 0x8) == 0x8))
+	}			/* else if (((ui_StatusRegister1 & 0x8) == 0x8)) */
 
 	return;
 }
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.h
index 80d7c0d39aa..e0023c8cb62 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.h
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.h
@@ -19,18 +19,18 @@
 #define APCI035_BOARD_VENDOR_ID		0x15B8
 #define APCI035_ADDRESS_RANGE		255
 
-INT i_TW_Number;
+int i_TW_Number;
 struct {
-	INT i_Gain;
-	INT i_Polarity;
-	INT i_OffsetRange;
-	INT i_Coupling;
-	INT i_SingleDiff;
-	INT i_AutoCalibration;
-	UINT ui_ReloadValue;
-	UINT ui_TimeUnitReloadVal;
-	INT i_Interrupt;
-	INT i_ModuleSelection;
+	int i_Gain;
+	int i_Polarity;
+	int i_OffsetRange;
+	int i_Coupling;
+	int i_SingleDiff;
+	int i_AutoCalibration;
+	unsigned int ui_ReloadValue;
+	unsigned int ui_TimeUnitReloadVal;
+	int i_Interrupt;
+	int i_ModuleSelection;
 } Config_Parameters_Main;
 
 /* ANALOG INPUT RANGE */
@@ -101,23 +101,23 @@ struct comedi_lrange range_apci035_ai = { 8, {
 
 /* TIMER */
 /* timer value is passed as u seconds */
-INT i_APCI035_ConfigTimerWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI035_ConfigTimerWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
 				  struct comedi_insn *insn, unsigned int *data);
-INT i_APCI035_StartStopWriteTimerWatchdog(struct comedi_device *dev,
+int i_APCI035_StartStopWriteTimerWatchdog(struct comedi_device *dev,
 					  struct comedi_subdevice *s,
 					  struct comedi_insn *insn, unsigned int *data);
-INT i_APCI035_ReadTimerWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI035_ReadTimerWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
 				struct comedi_insn *insn, unsigned int *data);
 
 /* Temperature Related Defines (Analog Input Subdevice) */
 
-INT i_APCI035_ConfigAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI035_ConfigAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
 				struct comedi_insn *insn, unsigned int *data);
-INT i_APCI035_ReadAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI035_ReadAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
 			      struct comedi_insn *insn, unsigned int *data);
 
 /* Interrupt */
 static void v_APCI035_Interrupt(int irq, void *d);
 
 /* Reset functions */
-INT i_APCI035_Reset(struct comedi_device *dev);
+int i_APCI035_Reset(struct comedi_device *dev);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.c
index 32796ceb946..e9021cd4d34 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.c
@@ -3,13 +3,13 @@
 
 Copyright (C) 2004,2005  ADDI-DATA GmbH for the source code of this module.
 
-        ADDI-DATA GmbH
-        Dieselstrasse 3
-        D-77833 Ottersweier
-        Tel: +19(0)7223/9493-0
-        Fax: +49(0)7223/9493-92
-        http://www.addi-data-com
-        info@addi-data.com
+	ADDI-DATA GmbH
+	Dieselstrasse 3
+	D-77833 Ottersweier
+	Tel: +19(0)7223/9493-0
+	Fax: +49(0)7223/9493-92
+	http://www.addi-data-com
+	info@addi-data.com
 
 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
 
@@ -53,8 +53,8 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 */
 #include "hwdrv_apci1032.h"
 #include <linux/delay.h>
-//Global variables
-UINT ui_InterruptStatus = 0;
+/* Global variables */
+unsigned int ui_InterruptStatus = 0;
 
 /*
 +----------------------------------------------------------------------------+
@@ -84,13 +84,13 @@ UINT ui_InterruptStatus = 0;
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1032_ConfigDigitalInput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1032_ConfigDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_TmpValue;
+	unsigned int ui_TmpValue;
 
-	ULONG ul_Command1 = 0;
-	ULONG ul_Command2 = 0;
+	unsigned int ul_Command1 = 0;
+	unsigned int ul_Command2 = 0;
 	devpriv->tsk_Current = current;
 
   /*******************************/
@@ -107,11 +107,11 @@ INT i_APCI1032_ConfigDigitalInput(struct comedi_device * dev, struct comedi_subd
 			outl(0x4, devpriv->iobase + APCI1032_DIGITAL_IP_IRQ);
 			ui_TmpValue =
 				inl(devpriv->iobase + APCI1032_DIGITAL_IP_IRQ);
-		}		//if (data[1] == ADDIDATA_OR)
+		}		/* if (data[1] == ADDIDATA_OR) */
 		else {
 			outl(0x6, devpriv->iobase + APCI1032_DIGITAL_IP_IRQ);
-		}		//else if(data[1] == ADDIDATA_OR)
-	}			// if( data[0] == ADDIDATA_ENABLE)
+		}		/* else if(data[1] == ADDIDATA_OR) */
+	}			/*  if( data[0] == ADDIDATA_ENABLE) */
 	else {
 		ul_Command1 = ul_Command1 & 0xFFFF0000;
 		ul_Command2 = ul_Command2 & 0xFFFF0000;
@@ -120,7 +120,7 @@ INT i_APCI1032_ConfigDigitalInput(struct comedi_device * dev, struct comedi_subd
 		outl(ul_Command2,
 			devpriv->iobase + APCI1032_DIGITAL_IP_INTERRUPT_MODE2);
 		outl(0x0, devpriv->iobase + APCI1032_DIGITAL_IP_IRQ);
-	}			//else if  ( data[0] == ADDIDATA_ENABLE)
+	}			/* else if  ( data[0] == ADDIDATA_ENABLE) */
 
 	return insn->n;
 }
@@ -134,7 +134,7 @@ INT i_APCI1032_ConfigDigitalInput(struct comedi_device * dev, struct comedi_subd
 | Task              : Return the status of the digital input                 |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev      : Driver handle                |
-|		              UINT ui_Channel : Channel number to read       |
+|		              unsigned int ui_Channel : Channel number to read       |
 |                     unsigned int *data          : Data Pointer to read status  |
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
@@ -144,22 +144,24 @@ INT i_APCI1032_ConfigDigitalInput(struct comedi_device * dev, struct comedi_subd
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-INT i_APCI1032_Read1DigitalInput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1032_Read1DigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_TmpValue = 0;
-	UINT ui_Channel;
+	unsigned int ui_TmpValue = 0;
+	unsigned int ui_Channel;
 	ui_Channel = CR_CHAN(insn->chanspec);
 	if (ui_Channel >= 0 && ui_Channel <= 31) {
-		ui_TmpValue = (UINT) inl(devpriv->iobase + APCI1032_DIGITAL_IP);
-		//  since only 1 channel reqd  to bring it to last bit it is rotated
-		//  8 +(chan - 1) times then ANDed with 1 for last bit.
+		ui_TmpValue = (unsigned int) inl(devpriv->iobase + APCI1032_DIGITAL_IP);
+/*
+* since only 1 channel reqd to bring it to last bit it is rotated 8
+* +(chan - 1) times then ANDed with 1 for last bit.
+*/
 		*data = (ui_TmpValue >> ui_Channel) & 0x1;
-	}			//if(ui_Channel >= 0 && ui_Channel <=31)
+	}			/* if(ui_Channel >= 0 && ui_Channel <=31) */
 	else {
-		//comedi_error(dev," \n chan spec wrong\n");
-		return -EINVAL;	// "sorry channel spec wrong "
-	}			//else if(ui_Channel >= 0 && ui_Channel <=31)
+		/* comedi_error(dev," \n chan spec wrong\n"); */
+		return -EINVAL;	/*  "sorry channel spec wrong " */
+	}			/* else if(ui_Channel >= 0 && ui_Channel <=31) */
 	return insn->n;
 }
 
@@ -172,8 +174,8 @@ INT i_APCI1032_Read1DigitalInput(struct comedi_device * dev, struct comedi_subde
 | Task              : Return the status of the Requested digital inputs      |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev      : Driver handle                |
-|                     UINT ui_NoOfChannels    : No Of Channels To be Read    |
-|                      UINT *data             : Data Pointer to read status  |
+|                     unsigned int ui_NoOfChannels    : No Of Channels To be Read    |
+|                      unsigned int *data             : Data Pointer to read status  |
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
 +----------------------------------------------------------------------------+
@@ -183,16 +185,16 @@ INT i_APCI1032_Read1DigitalInput(struct comedi_device * dev, struct comedi_subde
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1032_ReadMoreDigitalInput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1032_ReadMoreDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_PortValue = data[0];
-	UINT ui_Mask = 0;
-	UINT ui_NoOfChannels;
+	unsigned int ui_PortValue = data[0];
+	unsigned int ui_Mask = 0;
+	unsigned int ui_NoOfChannels;
 
 	ui_NoOfChannels = CR_CHAN(insn->chanspec);
 	if (data[1] == 0) {
-		*data = (UINT) inl(devpriv->iobase + APCI1032_DIGITAL_IP);
+		*data = (unsigned int) inl(devpriv->iobase + APCI1032_DIGITAL_IP);
 		switch (ui_NoOfChannels) {
 		case 2:
 			ui_Mask = 3;
@@ -213,16 +215,16 @@ INT i_APCI1032_ReadMoreDigitalInput(struct comedi_device * dev, struct comedi_su
 		case 31:
 			break;
 		default:
-			//comedi_error(dev," \nchan spec wrong\n");
-			return -EINVAL;	// "sorry channel spec wrong "
+			/* comedi_error(dev," \nchan spec wrong\n"); */
+			return -EINVAL;	/*  "sorry channel spec wrong " */
 			break;
-		}		//switch(ui_NoOfChannels)
-	}			//if(data[1]==0)
+		}		/* switch(ui_NoOfChannels) */
+	}			/* if(data[1]==0) */
 	else {
 		if (data[1] == 1) {
 			*data = ui_InterruptStatus;
-		}		//if(data[1]==1)
-	}			//else if(data[1]==0)
+		}		/* if(data[1]==1) */
+	}			/* else if(data[1]==0) */
 	return insn->n;
 }
 
@@ -247,16 +249,16 @@ static void v_APCI1032_Interrupt(int irq, void *d)
 {
 	struct comedi_device *dev = d;
 
-	UINT ui_Temp;
-	//disable the interrupt
+	unsigned int ui_Temp;
+	/* disable the interrupt */
 	ui_Temp = inl(devpriv->iobase + APCI1032_DIGITAL_IP_IRQ);
 	outl(ui_Temp & APCI1032_DIGITAL_IP_INTERRUPT_DISABLE,
 		devpriv->iobase + APCI1032_DIGITAL_IP_IRQ);
 	ui_InterruptStatus =
 		inl(devpriv->iobase + APCI1032_DIGITAL_IP_INTERRUPT_STATUS);
 	ui_InterruptStatus = ui_InterruptStatus & 0X0000FFFF;
-	send_sig(SIGIO, devpriv->tsk_Current, 0);	// send signal to the sample
-	outl(ui_Temp, devpriv->iobase + APCI1032_DIGITAL_IP_IRQ);	//enable the interrupt
+	send_sig(SIGIO, devpriv->tsk_Current, 0);	/*  send signal to the sample */
+	outl(ui_Temp, devpriv->iobase + APCI1032_DIGITAL_IP_IRQ);	/* enable the interrupt */
 	return;
 }
 
@@ -275,11 +277,11 @@ static void v_APCI1032_Interrupt(int irq, void *d)
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1032_Reset(struct comedi_device * dev)
+int i_APCI1032_Reset(struct comedi_device *dev)
 {
-	outl(0x0, devpriv->iobase + APCI1032_DIGITAL_IP_IRQ);	//disable the interrupts
-	inl(devpriv->iobase + APCI1032_DIGITAL_IP_INTERRUPT_STATUS);	//Reset the interrupt status register
-	outl(0x0, devpriv->iobase + APCI1032_DIGITAL_IP_INTERRUPT_MODE1);	//Disable the and/or interrupt
+	outl(0x0, devpriv->iobase + APCI1032_DIGITAL_IP_IRQ);	/* disable the interrupts */
+	inl(devpriv->iobase + APCI1032_DIGITAL_IP_INTERRUPT_STATUS);	/* Reset the interrupt status register */
+	outl(0x0, devpriv->iobase + APCI1032_DIGITAL_IP_INTERRUPT_MODE1);	/* Disable the and/or interrupt */
 	outl(0x0, devpriv->iobase + APCI1032_DIGITAL_IP_INTERRUPT_MODE2);
 	return 0;
 }
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.h
index 659ef85088c..e29a72a568f 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.h
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.h
@@ -19,45 +19,46 @@
 
 #define APCI1032_BOARD_VENDOR_ID 0x15B8
 #define APCI1032_ADDRESS_RANGE  20
-//DIGITAL INPUT DEFINE
+/* DIGITAL INPUT DEFINE */
 
 #define APCI1032_DIGITAL_IP                     0
 #define APCI1032_DIGITAL_IP_INTERRUPT_MODE1     4
 #define APCI1032_DIGITAL_IP_INTERRUPT_MODE2     8
 #define APCI1032_DIGITAL_IP_IRQ                 16
 
-//Digital Input IRQ Function Selection
+/* Digital Input IRQ Function Selection */
 #define ADDIDATA_OR                  0
 #define ADDIDATA_AND                 1
 
-//Digital Input Interrupt Status
+/* Digital Input Interrupt Status */
 #define APCI1032_DIGITAL_IP_INTERRUPT_STATUS    12
 
-//Digital Input Interrupt Enable Disable.
+/* Digital Input Interrupt Enable Disable. */
 #define APCI1032_DIGITAL_IP_INTERRUPT_ENABLE    0x4
 #define APCI1032_DIGITAL_IP_INTERRUPT_DISABLE   0xFFFFFFFB
 
-//ADDIDATA Enable Disable
+/* ADDIDATA Enable Disable */
 
 #define ADDIDATA_ENABLE                            1
 #define ADDIDATA_DISABLE                           0
 
-// Hardware Layer  functions for Apci1032
+/* Hardware Layer  functions for Apci1032 */
 
-//DI
-// for di read
+/*
+* DI for di read
+*/
 
-INT i_APCI1032_ConfigDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI1032_ConfigDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
 				  struct comedi_insn *insn, unsigned int *data);
 
-INT i_APCI1032_Read1DigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI1032_Read1DigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
 				 struct comedi_insn *insn, unsigned int *data);
 
-INT i_APCI1032_ReadMoreDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI1032_ReadMoreDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
 				    struct comedi_insn *insn, unsigned int *data);
 
-// Interrupt functions.....
+/* Interrupt functions..... */
 
 static void v_APCI1032_Interrupt(int irq, void *d);
-//Reset
-INT i_APCI1032_Reset(struct comedi_device *dev);
+/* Reset */
+int i_APCI1032_Reset(struct comedi_device *dev);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c
index 2d6adcff41e..236b8a31c82 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c
@@ -3,13 +3,13 @@
 
 Copyright (C) 2004,2005  ADDI-DATA GmbH for the source code of this module.
 
-        ADDI-DATA GmbH
-        Dieselstrasse 3
-        D-77833 Ottersweier
-        Tel: +19(0)7223/9493-0
-        Fax: +49(0)7223/9493-92
-        http://www.addi-data-com
-        info@addi-data.com
+	ADDI-DATA GmbH
+	Dieselstrasse 3
+	D-77833 Ottersweier
+	Tel: +19(0)7223/9493-0
+	Fax: +49(0)7223/9493-92
+	http://www.addi-data-com
+	info@addi-data.com
 
 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
 
@@ -77,7 +77,7 @@ int i_TimerCounter1Enabled = 0, i_TimerCounter2Enabled =
 |			  data[0]            :Number of the input port on        |
 |                                         which the event will take place    |
 |                                         (1 or 2)
-                      data[1]            : The event logic for port 1 has    |
+|                      data[1]            : The event logic for port 1 has    |
 |                                            three possibilities             |
 |                                        :0  APCI1500_AND       :This logic  |
 |                                                                links       |
@@ -137,8 +137,8 @@ int i_TimerCounter1Enabled = 0, i_TimerCounter2Enabled =
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1500_ConfigDigitalInputEvent(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI1500_ConfigDigitalInputEvent(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 	int i_PatternPolarity = 0, i_PatternTransition = 0, i_PatternMask = 0;
 	int i_MaxChannel = 0, i_Count = 0, i_EventMask = 0;
@@ -157,16 +157,16 @@ INT i_APCI1500_ConfigDigitalInputEvent(struct comedi_device * dev,
 
 	if (data[0] == 1) {
 		i_MaxChannel = 8;
-	}			// if (data[0] == 1)
+	}			/*  if (data[0] == 1) */
 	else {
 		if (data[0] == 2) {
 			i_MaxChannel = 6;
-		}		// if(data[0]==2)
+		}		/*  if(data[0]==2) */
 		else {
 			printk("\nThe specified port event  does not exist\n");
 			return -EINVAL;
-		}		//else if(data[0]==2)
-	}			//else  if (data[0] == 1)
+		}		/* else if(data[0]==2) */
+	}			/* else  if (data[0] == 1) */
 	switch (data[1]) {
 	case 0:
 		data[1] = APCI1500_AND;
@@ -180,7 +180,7 @@ INT i_APCI1500_ConfigDigitalInputEvent(struct comedi_device * dev,
 	default:
 		printk("\nThe specified interrupt logic does not exist\n");
 		return -EINVAL;
-	}			//switch(data[1]);
+	}			/* switch(data[1]); */
 
 	i_Logic = data[1];
 	for (i_Count = i_MaxChannel, i = 0; i_Count > 0; i_Count--, i++) {
@@ -224,8 +224,8 @@ INT i_APCI1500_ConfigDigitalInputEvent(struct comedi_device * dev,
 		default:
 			printk("\nThe option indicated in the event mask does not exist\n");
 			return -EINVAL;
-		}		// switch(i_EventMask)
-	}			//for (i_Count = i_MaxChannel; i_Count >0;i_Count --)
+		}		/*  switch(i_EventMask) */
+	}			/* for (i_Count = i_MaxChannel; i_Count >0;i_Count --) */
 
 	if (data[0] == 1) {
 		    /****************************/
@@ -247,7 +247,7 @@ INT i_APCI1500_ConfigDigitalInputEvent(struct comedi_device * dev,
 			      /********************************************/
 				printk("\nTransition error on an OR PRIORITY logic\n");
 				return -EINVAL;
-			}	// if (data[1]== APCI1500_OR_PRIORITY && i_PatternTransition != 0)
+			}	/*  if (data[1]== APCI1500_OR_PRIORITY && i_PatternTransition != 0) */
 
 		       /*************************************/
 			/* Tests if more than one transition */
@@ -261,7 +261,7 @@ INT i_APCI1500_ConfigDigitalInputEvent(struct comedi_device * dev,
 						((i_PatternTransition >>
 							i_Count) & 0x1);
 
-				}	//for (i_Count = 0; i_Count < 8; i_Count++)
+				}	/* for (i_Count = 0; i_Count < 8; i_Count++) */
 
 				if (i_PatternTransitionCount > 1) {
 				  /****************************************/
@@ -269,8 +269,8 @@ INT i_APCI1500_ConfigDigitalInputEvent(struct comedi_device * dev,
 				  /****************************************/
 					printk("\n Transition error on an AND logic\n");
 					return -EINVAL;
-				}	// if (i_PatternTransitionCount > 1)
-			}	// if (data[1]== APCI1500_AND)
+				}	/*  if (i_PatternTransitionCount > 1) */
+			}	/*  if (data[1]== APCI1500_AND) */
 
 			    /*****************************************************************/
 			/* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */
@@ -359,12 +359,12 @@ INT i_APCI1500_ConfigDigitalInputEvent(struct comedi_device * dev,
 				devpriv->iobase +
 				APCI1500_Z8536_CONTROL_REGISTER);
 
-		}		// if(data[1]==APCI1500_AND||data[1]==APCI1500_OR||data[1]==APCI1500_OR_PRIORITY)
+		}		/*  if(data[1]==APCI1500_AND||data[1]==APCI1500_OR||data[1]==APCI1500_OR_PRIORITY) */
 		else {
 			printk("\nThe choice for interrupt logic does not exist\n");
 			return -EINVAL;
-		}		// else }// if(data[1]==APCI1500_AND||data[1]==APCI1500_OR||data[1]==APCI1500_OR_PRIORITY)
-	}			//   if (data[0]== 1)
+		}		/*  else }// if(data[1]==APCI1500_AND||data[1]==APCI1500_OR||data[1]==APCI1500_OR_PRIORITY) */
+	}			/*    if (data[0]== 1) */
 
 		 /************************************/
 	/* Test if event setting for port 2 */
@@ -487,12 +487,12 @@ INT i_APCI1500_ConfigDigitalInputEvent(struct comedi_device * dev,
 			outb(0xF4,
 				devpriv->iobase +
 				APCI1500_Z8536_CONTROL_REGISTER);
-		}		//  if (data[1] == APCI1500_OR)
+		}		/*   if (data[1] == APCI1500_OR) */
 		else {
 			printk("\nThe choice for interrupt logic does not exist\n");
 			return -EINVAL;
-		}		//elseif (data[1] == APCI1500_OR)
-	}			//if(data[0]==2)
+		}		/* elseif (data[1] == APCI1500_OR) */
+	}			/* if(data[0]==2) */
 
 	return insn->n;
 }
@@ -506,11 +506,11 @@ INT i_APCI1500_ConfigDigitalInputEvent(struct comedi_device * dev,
 | Task              :  Allows or disallows a port event                      |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev      : Driver handle                |
-|		              UINT ui_Channel : Channel number to read       |
+|		              unsigned int ui_Channel : Channel number to read       |
 |                     unsigned int *data          : Data Pointer to read status  |
-                      data[0]                 :0 Start input event
-                                               1 Stop input event
-                      data[1]                 :No of port (1 or 2)
+|                      data[0]                 :0 Start input event
+|                                               1 Stop input event
+|                      data[1]                 :No of port (1 or 2)
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
 +----------------------------------------------------------------------------+
@@ -519,8 +519,8 @@ INT i_APCI1500_ConfigDigitalInputEvent(struct comedi_device * dev,
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-int i_APCI1500_StartStopInputEvent(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1500_StartStopInputEvent(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i_Event1InterruptStatus = 0, i_Event2InterruptStatus =
 		0, i_RegValue;
@@ -589,12 +589,12 @@ int i_APCI1500_StartStopInputEvent(struct comedi_device * dev, struct comedi_sub
 						devpriv->iobase +
 						APCI1500_Z8536_CONTROL_REGISTER);
 
-				}	// if(i_Event1Status==1)
+				}	/*  if(i_Event1Status==1) */
 				else {
 					printk("\nEvent 1 not initialised\n");
 					return -EINVAL;
-				}	//else if(i_Event1Status==1)
-			}	//if (data[1]==1)
+				}	/* else if(i_Event1Status==1) */
+			}	/* if (data[1]==1) */
 			if (data[1] == 2) {
 
 				if (i_Event2Status == 1) {
@@ -640,17 +640,17 @@ int i_APCI1500_StartStopInputEvent(struct comedi_device * dev, struct comedi_sub
 						devpriv->iobase +
 						APCI1500_Z8536_CONTROL_REGISTER);
 					i_Event2InterruptStatus = 1;
-				}	// if(i_Event2Status==1)
+				}	/*  if(i_Event2Status==1) */
 				else {
 					printk("\nEvent 2 not initialised\n");
 					return -EINVAL;
-				}	//else if(i_Event2Status==1)
-			}	// if(data[1]==2)
-		}		// if (data[1] == 1 || data[0] == 2)
+				}	/* else if(i_Event2Status==1) */
+			}	/*  if(data[1]==2) */
+		}		/*  if (data[1] == 1 || data[0] == 2) */
 		else {
 			printk("\nThe port parameter is in error\n");
 			return -EINVAL;
-		}		//else if (data[1] == 1 || data[0] == 2)
+		}		/* else if (data[1] == 1 || data[0] == 2) */
 
 		break;
 
@@ -701,12 +701,12 @@ int i_APCI1500_StartStopInputEvent(struct comedi_device * dev, struct comedi_sub
 						devpriv->iobase +
 						APCI1500_Z8536_CONTROL_REGISTER);
 					i_Event1InterruptStatus = 0;
-				}	// if(i_Event1Status==1)
+				}	/*  if(i_Event1Status==1) */
 				else {
 					printk("\nEvent 1 not initialised\n");
 					return -EINVAL;
-				}	//else if(i_Event1Status==1)
-			}	//if (data[1]==1)
+				}	/* else if(i_Event1Status==1) */
+			}	/* if (data[1]==1) */
 			if (data[1] == 2) {
 			 /*****************************/
 				/* Test if event initialised */
@@ -744,23 +744,23 @@ int i_APCI1500_StartStopInputEvent(struct comedi_device * dev, struct comedi_sub
 						devpriv->iobase +
 						APCI1500_Z8536_CONTROL_REGISTER);
 					i_Event2InterruptStatus = 0;
-				}	// if(i_Event2Status==1)
+				}	/*  if(i_Event2Status==1) */
 				else {
 					printk("\nEvent 2 not initialised\n");
 					return -EINVAL;
-				}	//else if(i_Event2Status==1)
-			}	//if(data[1]==2)
+				}	/* else if(i_Event2Status==1) */
+			}	/* if(data[1]==2) */
 
-		}		// if (data[1] == 1 || data[1] == 2)
+		}		/*  if (data[1] == 1 || data[1] == 2) */
 		else {
 			printk("\nThe port parameter is in error\n");
 			return -EINVAL;
-		}		//else if (data[1] == 1 || data[1] == 2)
+		}		/* else if (data[1] == 1 || data[1] == 2) */
 		break;
 	default:
 		printk("\nThe option of START/STOP logic does not exist\n");
 		return -EINVAL;
-	}			//switch(data[0])
+	}			/* switch(data[0]) */
 
 	return insn->n;
 }
@@ -774,7 +774,7 @@ int i_APCI1500_StartStopInputEvent(struct comedi_device * dev, struct comedi_sub
 | Task              : Return the status of the digital input                 |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev      : Driver handle                |
-|		              UINT ui_Channel : Channel number to read       |
+|		              unsigned int ui_Channel : Channel number to read       |
 |                     unsigned int *data          : Data Pointer to read status  |
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
@@ -784,8 +784,8 @@ int i_APCI1500_StartStopInputEvent(struct comedi_device * dev, struct comedi_sub
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-INT i_APCI1500_Initialisation(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1500_Initialisation(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i_DummyRead = 0;
     /******************/
@@ -943,11 +943,11 @@ INT i_APCI1500_Initialisation(struct comedi_device * dev, struct comedi_subdevic
 | Task              : Return the status of the Requested digital inputs      |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev      : Driver handle                |
-|                     UINT ui_NoOfChannels    : No Of Channels To be Read    |
-|                      UINT *data             : Data Pointer
-                      data[0]                 : 0 Read a single channel
-                                                1 read a port value
-                      data[1]                 : port value
+|                     unsigned int ui_NoOfChannels    : No Of Channels To be Read    |
+|                      unsigned int *data             : Data Pointer
+|                      data[0]                 : 0 Read a single channel
+|                                                1 read a port value
+|                      data[1]                 : port value
 +----------------------------------------------------------------------------+
 | Output Parameters :	--	data[0]    :The read status value
 +----------------------------------------------------------------------------+
@@ -957,31 +957,31 @@ INT i_APCI1500_Initialisation(struct comedi_device * dev, struct comedi_subdevic
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1500_ReadMoreDigitalInput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1500_ReadMoreDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_PortValue = data[1];
-	UINT ui_Mask = 0;
-	UINT ui_Channel;
-	UINT ui_TmpValue = 0;
+	unsigned int ui_PortValue = data[1];
+	unsigned int ui_Mask = 0;
+	unsigned int ui_Channel;
+	unsigned int ui_TmpValue = 0;
 	ui_Channel = CR_CHAN(insn->chanspec);
 
 	switch (data[0]) {
 	case 0:
 		if (ui_Channel >= 0 && ui_Channel <= 15) {
 			ui_TmpValue =
-				(UINT) inw(devpriv->i_IobaseAddon +
+				(unsigned int) inw(devpriv->i_IobaseAddon +
 				APCI1500_DIGITAL_IP);
 			*data = (ui_TmpValue >> ui_Channel) & 0x1;
-		}		//if(ui_Channel >= 0 && ui_Channel <=15)
+		}		/* if(ui_Channel >= 0 && ui_Channel <=15) */
 		else {
 			printk("\nThe channel specification are in error\n");
-			return -EINVAL;	// "sorry channel spec wrong "
-		}		//else if(ui_Channel >= 0 && ui_Channel <=15)
+			return -EINVAL;	/*  "sorry channel spec wrong " */
+		}		/* else if(ui_Channel >= 0 && ui_Channel <=15) */
 		break;
 	case 1:
 
-		*data = (UINT) inw(devpriv->i_IobaseAddon +
+		*data = (unsigned int) inw(devpriv->i_IobaseAddon +
 			APCI1500_DIGITAL_IP);
 		switch (ui_Channel) {
 		case 2:
@@ -1001,35 +1001,35 @@ INT i_APCI1500_ReadMoreDigitalInput(struct comedi_device * dev, struct comedi_su
 
 		default:
 			printk("\nSpecified channel cannot be read \n");
-			return -EINVAL;	// "sorry channel spec wrong "
+			return -EINVAL;	/*  "sorry channel spec wrong " */
 			break;
-		}		//switch(ui_Channel)
+		}		/* switch(ui_Channel) */
 		break;
 	default:
 		printk("\nThe specified functionality does not exist\n");
 		return -EINVAL;
-	}			//switch(data[0])
+	}			/* switch(data[0]) */
 	return insn->n;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function   Name   : int i_APCI1500_ConfigDigitalOutputErrorInterrupt
-                      (struct comedi_device *dev,struct comedi_subdevice *s struct comedi_insn
-                      *insn,unsigned int *data)                                  |
+|                      (struct comedi_device *dev,struct comedi_subdevice *s struct comedi_insn
+|                      *insn,unsigned int *data)                                  |
 |				                                                     |
 +----------------------------------------------------------------------------+
 | Task              : Configures the digital output memory and the digital
-                      output error interrupt                                 |
+|                      output error interrupt                                 |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev : Driver handle                     |
 |                     unsigned int *data         : Data Pointer contains         |
 |                                          configuration parameters as below |
 |                      struct comedi_subdevice *s,   :pointer to subdevice structure
-                       struct comedi_insn *insn      :pointer to insn structure                                                                                                                |
+|                       struct comedi_insn *insn      :pointer to insn structure                                                                                                                |
 |					  data[0]  :1:Memory on                          |
 |					            0:Memory off                         |
-                              data[1]  :1 Enable the voltage error interrupt
+|                              data[1]  :1 Enable the voltage error interrupt
 |							   :0 Disable the voltage error interrupt 		                                                                                                    |
 |																	 |
 +----------------------------------------------------------------------------+
@@ -1040,8 +1040,8 @@ INT i_APCI1500_ReadMoreDigitalInput(struct comedi_device * dev, struct comedi_su
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-int i_APCI1500_ConfigDigitalOutputErrorInterrupt(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI1500_ConfigDigitalOutputErrorInterrupt(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 	devpriv->b_OutputMemoryStatus = data[0];
 	return insn->n;
@@ -1056,8 +1056,8 @@ int i_APCI1500_ConfigDigitalOutputErrorInterrupt(struct comedi_device * dev,
 | Task              : Writes port value  To the selected port                |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev      : Driver handle                |
-|                     UINT ui_NoOfChannels    : No Of Channels To Write      |
-|                     UINT *data              : Data Pointer to read status  |
+|                     unsigned int ui_NoOfChannels    : No Of Channels To Write      |
+|                     unsigned int *data              : Data Pointer to read status  |
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
 +----------------------------------------------------------------------------+
@@ -1067,24 +1067,24 @@ int i_APCI1500_ConfigDigitalOutputErrorInterrupt(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1500_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1500_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	static UINT ui_Temp = 0;
-	UINT ui_Temp1;
+	static unsigned int ui_Temp = 0;
+	unsigned int ui_Temp1;
 
-	UINT ui_NoOfChannel = CR_CHAN(insn->chanspec);	// get the channel
+	unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec);	/*  get the channel */
 
 	if (!devpriv->b_OutputMemoryStatus) {
 		ui_Temp = 0;
 
-	}			//if(!devpriv->b_OutputMemoryStatus )
+	}			/* if(!devpriv->b_OutputMemoryStatus ) */
 	if (data[3] == 0) {
 		if (data[1] == 0) {
 			data[0] = (data[0] << ui_NoOfChannel) | ui_Temp;
 			outw(data[0],
 				devpriv->i_IobaseAddon + APCI1500_DIGITAL_OP);
-		}		//if(data[1]==0)
+		}		/* if(data[1]==0) */
 		else {
 			if (data[1] == 1) {
 				switch (ui_NoOfChannel) {
@@ -1113,19 +1113,19 @@ INT i_APCI1500_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 
 				default:
 					comedi_error(dev, " chan spec wrong");
-					return -EINVAL;	// "sorry channel spec wrong "
+					return -EINVAL;	/*  "sorry channel spec wrong " */
 
-				}	//switch(ui_NoOfChannels)
+				}	/* switch(ui_NoOfChannels) */
 
 				outw(data[0],
 					devpriv->i_IobaseAddon +
 					APCI1500_DIGITAL_OP);
-			}	// if(data[1]==1)
+			}	/*  if(data[1]==1) */
 			else {
 				printk("\nSpecified channel not supported\n");
-			}	//else if(data[1]==1)
-		}		//elseif(data[1]==0)
-	}			//if(data[3]==0)
+			}	/* else if(data[1]==1) */
+		}		/* elseif(data[1]==0) */
+	}			/* if(data[3]==0) */
 	else {
 		if (data[3] == 1) {
 			if (data[1] == 0) {
@@ -1140,7 +1140,7 @@ INT i_APCI1500_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 				outw(data[0],
 					devpriv->i_IobaseAddon +
 					APCI1500_DIGITAL_OP);
-			}	//if(data[1]==0)
+			}	/* if(data[1]==0) */
 			else {
 				if (data[1] == 1) {
 					switch (ui_NoOfChannel) {
@@ -1190,48 +1190,48 @@ INT i_APCI1500_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 					default:
 						comedi_error(dev,
 							" chan spec wrong");
-						return -EINVAL;	// "sorry channel spec wrong "
+						return -EINVAL;	/*  "sorry channel spec wrong " */
 
-					}	//switch(ui_NoOfChannels)
+					}	/* switch(ui_NoOfChannels) */
 
 					outw(data[0],
 						devpriv->i_IobaseAddon +
 						APCI1500_DIGITAL_OP);
-				}	// if(data[1]==1)
+				}	/*  if(data[1]==1) */
 				else {
 					printk("\nSpecified channel not supported\n");
-				}	//else if(data[1]==1)
-			}	//elseif(data[1]==0)
-		}		//if(data[3]==1);
+				}	/* else if(data[1]==1) */
+			}	/* elseif(data[1]==0) */
+		}		/* if(data[3]==1); */
 		else {
 			printk("\nSpecified functionality does not exist\n");
 			return -EINVAL;
-		}		//if else data[3]==1)
-	}			//if else data[3]==0)
+		}		/* if else data[3]==1) */
+	}			/* if else data[3]==0) */
 	ui_Temp = data[0];
-	return (insn->n);;
+	return insn->n;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function   Name   : int i_APCI1500_ConfigCounterTimerWatchdog(comedi_device
-                   *dev,struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data)|
+|                   *dev,struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data)|
 |				                                                     |
 +----------------------------------------------------------------------------+
 | Task              : Configures The Watchdog                                |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev      : Driver handle                |
 |                     struct comedi_subdevice *s,   :pointer to subdevice structure
-                      struct comedi_insn *insn      :pointer to insn structure      |
+|                      struct comedi_insn *insn      :pointer to insn structure      |
 |                     unsigned int *data         : Data Pointer to read status                                                       data[0]                : 2     APCI1500_1_8_KHZ
 |                                              1     APCI1500_3_6_KHZ        |
 |                                              0     APCI1500_115_KHZ
-                      data[1]                : 0     Counter1/Timer1
-                                               1     Counter2/Timer2
-                                               2     Counter3/Watchdog
-                      data[2]                : 0     Counter
-                                               1     Timer/Watchdog
-                      data[3]                :         This parameter has    |
+|                      data[1]                : 0     Counter1/Timer1
+|                                               1     Counter2/Timer2
+|                                               2     Counter3/Watchdog
+|                      data[2]                : 0     Counter
+|                                               1     Timer/Watchdog
+|                      data[3]                :         This parameter has    |
 |                                                      two meanings.         |
 |                                                    - If the counter/timer  |
 |                                                      is used as a counter  |
@@ -1243,15 +1243,15 @@ INT i_APCI1500_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 |                                                      the divider factor    |
 |                                                      for the output is     |
 |                                                      given.
-                       data[4]                 : 0    APCI1500_CONTINUOUS
-                                                 1    APCI1500_SINGLE
-                       data[5]                 : 0    Software Trigger
-                                                 1    Hardware Trigger
-
-                       data[6]                  :0    Software gate
-                                                 1    Hardware gate
-                       data[7]                  :0    Interrupt Disable
-                                                 1    Interrupt Enable
+|                       data[4]                 : 0    APCI1500_CONTINUOUS
+|                                                 1    APCI1500_SINGLE
+|                       data[5]                 : 0    Software Trigger
+|                                                 1    Hardware Trigger
+|
+|                       data[6]                  :0    Software gate
+|                                                 1    Hardware gate
+|                       data[7]                  :0    Interrupt Disable
+|                                                 1    Interrupt Enable
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
 +----------------------------------------------------------------------------+
@@ -1261,27 +1261,27 @@ INT i_APCI1500_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 	int i_TimerCounterMode, i_MasterConfiguration;
 
 	devpriv->tsk_Current = current;
 
-//Selection of the input clock
+/* Selection of the input clock */
 	if (data[0] == 0 || data[0] == 1 || data[0] == 2) {
 		outw(data[0], devpriv->i_IobaseAddon + APCI1500_CLK_SELECT);
-	}			// if(data[0]==0||data[0]==1||data[0]==2)
+	}			/*  if(data[0]==0||data[0]==1||data[0]==2) */
 	else {
 		if (data[0] != 3) {
 			printk("\nThe option for input clock selection does not exist\n");
 			return -EINVAL;
-		}		// if(data[0]!=3)
-	}			//elseif(data[0]==0||data[0]==1||data[0]==2)
-	//Select the counter/timer
+		}		/*  if(data[0]!=3) */
+	}			/* elseif(data[0]==0||data[0]==1||data[0]==2) */
+	/* Select the counter/timer */
 	switch (data[1]) {
 	case COUNTER1:
-		//selecting counter or timer
+		/* selecting counter or timer */
 		switch (data[2]) {
 		case 0:
 			data[2] = APCI1500_COUNTER;
@@ -1292,9 +1292,9 @@ int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
 		default:
 			printk("\nThis choice is not a timer nor a counter\n");
 			return -EINVAL;
-		}		// switch(data[2])
+		}		/*  switch(data[2]) */
 
-		//Selecting  single or continuous mode
+		/* Selecting  single or continuous mode */
 		switch (data[4]) {
 		case 0:
 			data[4] = APCI1500_CONTINUOUS;
@@ -1305,7 +1305,7 @@ int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
 		default:
 			printk("\nThis option for single/continuous mode does not exist\n");
 			return -EINVAL;
-		}		// switch(data[4])
+		}		/*  switch(data[4]) */
 
 		i_TimerCounterMode = data[2] | data[4] | 7;
 			 /*************************/
@@ -1428,21 +1428,21 @@ int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
 				outb(0x2,
 					devpriv->iobase +
 					APCI1500_Z8536_CONTROL_REGISTER);
-			}	//if(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE)
+			}	/* if(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */
 			else {
 				printk("\nError in selection of interrupt enable or disable\n");
 				return -EINVAL;
-			}	//elseif(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE)
-		}		// if ((data[3]>= 0) && (data[3] <= 65535))
+			}	/* elseif(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */
+		}		/*  if ((data[3]>= 0) && (data[3] <= 65535)) */
 		else {
 			printk("\nError in selection of reload value\n");
 			return -EINVAL;
-		}		//else if ((data[3]>= 0) && (data[3] <= 65535))
+		}		/* else if ((data[3]>= 0) && (data[3] <= 65535)) */
 		i_TimerCounterWatchdogInterrupt = data[7];
 		i_TimerCounter1Init = 1;
 		break;
 
-	case COUNTER2:		//selecting counter or timer
+	case COUNTER2:		/* selecting counter or timer */
 		switch (data[2]) {
 		case 0:
 			data[2] = APCI1500_COUNTER;
@@ -1453,9 +1453,9 @@ int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
 		default:
 			printk("\nThis choice is not a timer nor a counter\n");
 			return -EINVAL;
-		}		// switch(data[2])
+		}		/*  switch(data[2]) */
 
-		//Selecting  single or continuous mode
+		/* Selecting  single or continuous mode */
 		switch (data[4]) {
 		case 0:
 			data[4] = APCI1500_CONTINUOUS;
@@ -1466,9 +1466,9 @@ int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
 		default:
 			printk("\nThis option for single/continuous mode does not exist\n");
 			return -EINVAL;
-		}		// switch(data[4])
+		}		/*  switch(data[4]) */
 
-		//Selecting  software or hardware trigger
+		/* Selecting  software or hardware trigger */
 		switch (data[5]) {
 		case 0:
 			data[5] = APCI1500_SOFTWARE_TRIGGER;
@@ -1479,9 +1479,9 @@ int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
 		default:
 			printk("\nThis choice for software or hardware trigger does not exist\n");
 			return -EINVAL;
-		}		// switch(data[5])
+		}		/*  switch(data[5]) */
 
-		//Selecting  software or hardware gate
+		/* Selecting  software or hardware gate */
 		switch (data[6]) {
 		case 0:
 			data[6] = APCI1500_SOFTWARE_GATE;
@@ -1492,7 +1492,7 @@ int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
 		default:
 			printk("\nThis choice for software or hardware gate does not exist\n");
 			return -EINVAL;
-		}		// switch(data[6])
+		}		/*  switch(data[6]) */
 
 		i_TimerCounterMode = data[2] | data[4] | data[5] | data[6] | 7;
 
@@ -1616,21 +1616,21 @@ int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
 				outb(0x2,
 					devpriv->iobase +
 					APCI1500_Z8536_CONTROL_REGISTER);
-			}	//if(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE)
+			}	/* if(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */
 			else {
 				printk("\nError in selection of interrupt enable or disable\n");
 				return -EINVAL;
-			}	//elseif(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE)
-		}		// if ((data[3]>= 0) && (data[3] <= 65535))
+			}	/* elseif(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */
+		}		/*  if ((data[3]>= 0) && (data[3] <= 65535)) */
 		else {
 			printk("\nError in selection of reload value\n");
 			return -EINVAL;
-		}		//else if ((data[3]>= 0) && (data[3] <= 65535))
+		}		/* else if ((data[3]>= 0) && (data[3] <= 65535)) */
 		i_TimerCounterWatchdogInterrupt = data[7];
 		i_TimerCounter2Init = 1;
 		break;
 
-	case COUNTER3:		//selecting counter or watchdog
+	case COUNTER3:		/* selecting counter or watchdog */
 		switch (data[2]) {
 		case 0:
 			data[2] = APCI1500_COUNTER;
@@ -1641,9 +1641,9 @@ int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
 		default:
 			printk("\nThis choice is not a watchdog nor a counter\n");
 			return -EINVAL;
-		}		// switch(data[2])
+		}		/*  switch(data[2]) */
 
-		//Selecting  single or continuous mode
+		/* Selecting  single or continuous mode */
 		switch (data[4]) {
 		case 0:
 			data[4] = APCI1500_CONTINUOUS;
@@ -1654,9 +1654,9 @@ int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
 		default:
 			printk("\nThis option for single/continuous mode does not exist\n");
 			return -EINVAL;
-		}		// switch(data[4])
+		}		/*  switch(data[4]) */
 
-		//Selecting  software or hardware gate
+		/* Selecting  software or hardware gate */
 		switch (data[6]) {
 		case 0:
 			data[6] = APCI1500_SOFTWARE_GATE;
@@ -1667,7 +1667,7 @@ int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
 		default:
 			printk("\nThis choice for software or hardware gate does not exist\n");
 			return -EINVAL;
-		}		// switch(data[6])
+		}		/*  switch(data[6]) */
 
 		      /*****************************/
 		/* Test if used for watchdog */
@@ -1680,10 +1680,10 @@ int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
 			/* - Pulses output           */
 			     /*****************************/
 			i_TimerCounterMode = data[2] | data[4] | 0x54;
-		}		//if (data[2] == APCI1500_WATCHDOG)
+		}		/* if (data[2] == APCI1500_WATCHDOG) */
 		else {
 			i_TimerCounterMode = data[2] | data[4] | data[6] | 7;
-		}		//elseif (data[2] == APCI1500_WATCHDOG)
+		}		/* elseif (data[2] == APCI1500_WATCHDOG) */
 				 /*************************/
 		/* Test the reload value */
 			     /*************************/
@@ -1809,25 +1809,25 @@ int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
 						devpriv->iobase +
 						APCI1500_Z8536_CONTROL_REGISTER);
 
-				}	//elseif(data[2]==APCI1500_COUNTER)
+				}	/* elseif(data[2]==APCI1500_COUNTER) */
 
-			}	//if(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE)
+			}	/* if(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */
 			else {
 				printk("\nError in selection of interrupt enable or disable\n");
 				return -EINVAL;
-			}	//elseif(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE)
-		}		// if ((data[3]>= 0) && (data[3] <= 65535))
+			}	/* elseif(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */
+		}		/*  if ((data[3]>= 0) && (data[3] <= 65535)) */
 		else {
 			printk("\nError in selection of reload value\n");
 			return -EINVAL;
-		}		//else if ((data[3]>= 0) && (data[3] <= 65535))
+		}		/* else if ((data[3]>= 0) && (data[3] <= 65535)) */
 		i_TimerCounterWatchdogInterrupt = data[7];
 		i_WatchdogCounter3Init = 1;
 		break;
 
 	default:
 		printk("\nThe specified counter\timer option does not exist\n");
-	}			//switch(data[1])
+	}			/* switch(data[1]) */
 	i_CounterLogic = data[2];
 	return insn->n;
 }
@@ -1836,22 +1836,22 @@ int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 | Function   Name   : int i_APCI1500_StartStopTriggerTimerCounterWatchdog      |
 |				(struct comedi_device *dev,struct comedi_subdevice *s,
-                         struct comedi_insn *insn,unsigned int *data);                  |
+|                         struct comedi_insn *insn,unsigned int *data);                  |
 +----------------------------------------------------------------------------+
 | Task              : Start / Stop or trigger the timer counter or Watchdog  |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev     : Driver handle                 |
 |                     struct comedi_subdevice *s,   :pointer to subdevice structure
-                      struct comedi_insn *insn      :pointer to insn structure      |
+|                      struct comedi_insn *insn      :pointer to insn structure      |
 |                     unsigned int *data         : Data Pointer to read status   |
-                      data[0]                : 0     Counter1/Timer1
-                                               1     Counter2/Timer2
-                                               2     Counter3/Watchdog
-                      data[1]                : 0     start
-                                               1     stop
-                                               2     Trigger
-                      data[2]                : 0     Counter
-                                               1     Timer/Watchdog
+|                      data[0]                : 0     Counter1/Timer1
+|                                               1     Counter2/Timer2
+|                                               2     Counter3/Watchdog
+|                      data[1]                : 0     start
+|                                               1     stop
+|                                               2     Trigger
+|                      data[2]                : 0     Counter
+|                                               1     Timer/Watchdog
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
 +----------------------------------------------------------------------------+
@@ -1860,8 +1860,8 @@ int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 	int i_CommandAndStatusValue;
 
@@ -1871,11 +1871,11 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
 		case START:
 			if (i_TimerCounter1Init == 1) {
 				if (i_TimerCounterWatchdogInterrupt == 1) {
-					i_CommandAndStatusValue = 0xC4;	//Enable the interrupt
-				}	// if(i_TimerCounterWatchdogInterrupt==1)
+					i_CommandAndStatusValue = 0xC4;	/* Enable the interrupt */
+				}	/*  if(i_TimerCounterWatchdogInterrupt==1) */
 				else {
-					i_CommandAndStatusValue = 0xE4;	//disable the interrupt
-				}	//elseif(i_TimerCounterWatchdogInterrupt==1)
+					i_CommandAndStatusValue = 0xE4;	/* disable the interrupt */
+				}	/* elseif(i_TimerCounterWatchdogInterrupt==1) */
 					      /**************************/
 				/* Starts timer/counter 1 */
 					      /**************************/
@@ -1889,7 +1889,7 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
 				outb(i_CommandAndStatusValue,
 					devpriv->iobase +
 					APCI1500_Z8536_CONTROL_REGISTER);
-			}	//if( i_TimerCounter1Init==1)
+			}	/* if( i_TimerCounter1Init==1) */
 			else {
 				printk("\nCounter/Timer1 not configured\n");
 				return -EINVAL;
@@ -1922,14 +1922,14 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
 						 /************************/
 
 					i_CommandAndStatusValue = 0x6;
-				}	//if( i_TimerCounter1Enabled==1)
+				}	/* if( i_TimerCounter1Enabled==1) */
 				else {
 						   /***************/
 					/* Set Trigger */
 						   /***************/
 
 					i_CommandAndStatusValue = 0x2;
-				}	//elseif(i_TimerCounter1Enabled==1)
+				}	/* elseif(i_TimerCounter1Enabled==1) */
 
 						/********************************************/
 				/* Selects the commands and status register */
@@ -1940,7 +1940,7 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
 				outb(i_CommandAndStatusValue,
 					devpriv->iobase +
 					APCI1500_Z8536_CONTROL_REGISTER);
-			}	//if( i_TimerCounter1Init==1)
+			}	/* if( i_TimerCounter1Init==1) */
 			else {
 				printk("\nCounter/Timer1 not configured\n");
 				return -EINVAL;
@@ -1950,7 +1950,7 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
 		default:
 			printk("\nThe specified option for start/stop/trigger does not exist\n");
 			return -EINVAL;
-		}		//switch(data[1])
+		}		/* switch(data[1]) */
 		break;
 
 	case COUNTER2:
@@ -1958,11 +1958,11 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
 		case START:
 			if (i_TimerCounter2Init == 1) {
 				if (i_TimerCounterWatchdogInterrupt == 1) {
-					i_CommandAndStatusValue = 0xC4;	//Enable the interrupt
-				}	// if(i_TimerCounterWatchdogInterrupt==1)
+					i_CommandAndStatusValue = 0xC4;	/* Enable the interrupt */
+				}	/*  if(i_TimerCounterWatchdogInterrupt==1) */
 				else {
-					i_CommandAndStatusValue = 0xE4;	//disable the interrupt
-				}	//elseif(i_TimerCounterWatchdogInterrupt==1)
+					i_CommandAndStatusValue = 0xE4;	/* disable the interrupt */
+				}	/* elseif(i_TimerCounterWatchdogInterrupt==1) */
 					      /**************************/
 				/* Starts timer/counter 2 */
 					      /**************************/
@@ -1976,7 +1976,7 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
 				outb(i_CommandAndStatusValue,
 					devpriv->iobase +
 					APCI1500_Z8536_CONTROL_REGISTER);
-			}	//if( i_TimerCounter2Init==1)
+			}	/* if( i_TimerCounter2Init==1) */
 			else {
 				printk("\nCounter/Timer2 not configured\n");
 				return -EINVAL;
@@ -2008,14 +2008,14 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
 						 /************************/
 
 					i_CommandAndStatusValue = 0x6;
-				}	//if( i_TimerCounter2Enabled==1)
+				}	/* if( i_TimerCounter2Enabled==1) */
 				else {
 						   /***************/
 					/* Set Trigger */
 						   /***************/
 
 					i_CommandAndStatusValue = 0x2;
-				}	//elseif(i_TimerCounter2Enabled==1)
+				}	/* elseif(i_TimerCounter2Enabled==1) */
 
 						/********************************************/
 				/* Selects the commands and status register */
@@ -2026,7 +2026,7 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
 				outb(i_CommandAndStatusValue,
 					devpriv->iobase +
 					APCI1500_Z8536_CONTROL_REGISTER);
-			}	//if( i_TimerCounter2Init==1)
+			}	/* if( i_TimerCounter2Init==1) */
 			else {
 				printk("\nCounter/Timer2 not configured\n");
 				return -EINVAL;
@@ -2035,7 +2035,7 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
 		default:
 			printk("\nThe specified option for start/stop/trigger does not exist\n");
 			return -EINVAL;
-		}		//switch(data[1])
+		}		/* switch(data[1]) */
 		break;
 	case COUNTER3:
 		switch (data[1]) {
@@ -2043,11 +2043,11 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
 			if (i_WatchdogCounter3Init == 1) {
 
 				if (i_TimerCounterWatchdogInterrupt == 1) {
-					i_CommandAndStatusValue = 0xC4;	//Enable the interrupt
-				}	// if(i_TimerCounterWatchdogInterrupt==1)
+					i_CommandAndStatusValue = 0xC4;	/* Enable the interrupt */
+				}	/*  if(i_TimerCounterWatchdogInterrupt==1) */
 				else {
-					i_CommandAndStatusValue = 0xE4;	//disable the interrupt
-				}	//elseif(i_TimerCounterWatchdogInterrupt==1)
+					i_CommandAndStatusValue = 0xE4;	/* disable the interrupt */
+				}	/* elseif(i_TimerCounterWatchdogInterrupt==1) */
 					      /**************************/
 				/* Starts Watchdog/counter 3 */
 					      /**************************/
@@ -2062,7 +2062,7 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
 					devpriv->iobase +
 					APCI1500_Z8536_CONTROL_REGISTER);
 
-			}	// if( i_WatchdogCounter3init==1)
+			}	/*  if( i_WatchdogCounter3init==1) */
 			else {
 				printk("\nWatchdog/Counter3 not configured\n");
 				return -EINVAL;
@@ -2089,7 +2089,7 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
 
 		case TRIGGER:
 			switch (data[2]) {
-			case 0:	//triggering counter 3
+			case 0:	/* triggering counter 3 */
 				if (i_WatchdogCounter3Init == 1) {
 					if (i_WatchdogCounter3Enabled == 1) {
 							       /************************/
@@ -2097,14 +2097,14 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
 							       /************************/
 
 						i_CommandAndStatusValue = 0x6;
-					}	//if( i_WatchdogCounter3Enabled==1)
+					}	/* if( i_WatchdogCounter3Enabled==1) */
 					else {
 							   /***************/
 						/* Set Trigger */
 							   /***************/
 
 						i_CommandAndStatusValue = 0x2;
-					}	//elseif(i_WatchdogCounter3Enabled==1)
+					}	/* elseif(i_WatchdogCounter3Enabled==1) */
 
 						/********************************************/
 					/* Selects the commands and status register */
@@ -2115,14 +2115,14 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
 					outb(i_CommandAndStatusValue,
 						devpriv->iobase +
 						APCI1500_Z8536_CONTROL_REGISTER);
-				}	//if( i_WatchdogCounter3Init==1)
+				}	/* if( i_WatchdogCounter3Init==1) */
 				else {
 					printk("\nCounter3 not configured\n");
 					return -EINVAL;
 				}
 				break;
 			case 1:
-				//triggering Watchdog 3
+				/* triggering Watchdog 3 */
 				if (i_WatchdogCounter3Init == 1) {
 
 						/********************************************/
@@ -2134,7 +2134,7 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
 					outb(0x6,
 						devpriv->iobase +
 						APCI1500_Z8536_CONTROL_REGISTER);
-				}	//if( i_WatchdogCounter3Init==1)
+				}	/* if( i_WatchdogCounter3Init==1) */
 				else {
 					printk("\nWatchdog 3 not configured\n");
 					return -EINVAL;
@@ -2143,17 +2143,17 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
 			default:
 				printk("\nWrong choice of watchdog/counter3\n");
 				return -EINVAL;
-			}	//switch(data[2])
+			}	/* switch(data[2]) */
 			break;
 		default:
 			printk("\nThe specified option for start/stop/trigger does not exist\n");
 			return -EINVAL;
-		}		//switch(data[1])
+		}		/* switch(data[1]) */
 		break;
 	default:
 		printk("\nThe specified choice for counter/watchdog/timer does not exist\n");
 		return -EINVAL;
-	}			//switch(data[0])
+	}			/* switch(data[0]) */
 	return insn->n;
 }
 
@@ -2161,18 +2161,18 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 | Function   Name   : int i_APCI1500_ReadCounterTimerWatchdog                |
 |			(struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,
-                    unsigned int *data); 	                                     |
+|                    unsigned int *data); 	                                     |
 +----------------------------------------------------------------------------+
 | Task              : Read The Watchdog                                      |
 +----------------------------------------------------------------------------+
 | Input Parameters  :   struct comedi_device *dev      : Driver handle              |
 |                     struct comedi_subdevice *s,   :pointer to subdevice structure
-                      struct comedi_insn *insn      :pointer to insn structure      |
+|                      struct comedi_insn *insn      :pointer to insn structure      |
 |                     unsigned int *data          : Data Pointer to read status  |
-                      data[0]                : 0     Counter1/Timer1
-                                               1     Counter2/Timer2
-                                               2     Counter3/Watchdog
-
+|                      data[0]                : 0     Counter1/Timer1
+|                                               1     Counter2/Timer2
+|                                               2     Counter3/Watchdog
+|
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
 +----------------------------------------------------------------------------+
@@ -2182,13 +2182,13 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI1500_ReadCounterTimerWatchdog(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI1500_ReadCounterTimerWatchdog(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 	int i_CommandAndStatusValue;
 	switch (data[0]) {
 	case COUNTER1:
-		//Read counter/timer1
+		/* Read counter/timer1 */
 		if (i_TimerCounter1Init == 1) {
 			if (i_TimerCounter1Enabled == 1) {
 		  /************************/
@@ -2196,14 +2196,14 @@ int i_APCI1500_ReadCounterTimerWatchdog(struct comedi_device * dev,
 		  /************************/
 
 				i_CommandAndStatusValue = 0xC;
-			}	//if( i_TimerCounter1Init==1)
+			}	/* if( i_TimerCounter1Init==1) */
 			else {
 		    /***************/
 				/* Set RCC */
 		    /***************/
 
 				i_CommandAndStatusValue = 0x8;
-			}	//elseif(i_TimerCounter1Init==1)
+			}	/* elseif(i_TimerCounter1Init==1) */
 
 		/********************************************/
 			/* Selects the commands and status register */
@@ -2232,14 +2232,14 @@ int i_APCI1500_ReadCounterTimerWatchdog(struct comedi_device * dev,
 			data[0] =
 				data[0] | inb(devpriv->iobase +
 				APCI1500_Z8536_CONTROL_REGISTER);
-		}		//if( i_TimerCounter1Init==1)
+		}		/* if( i_TimerCounter1Init==1) */
 		else {
 			printk("\nTimer/Counter1 not configured\n");
 			return -EINVAL;
-		}		//elseif( i_TimerCounter1Init==1)
+		}		/* elseif( i_TimerCounter1Init==1) */
 		break;
 	case COUNTER2:
-		//Read counter/timer2
+		/* Read counter/timer2 */
 		if (i_TimerCounter2Init == 1) {
 			if (i_TimerCounter2Enabled == 1) {
 		  /************************/
@@ -2247,14 +2247,14 @@ int i_APCI1500_ReadCounterTimerWatchdog(struct comedi_device * dev,
 		  /************************/
 
 				i_CommandAndStatusValue = 0xC;
-			}	//if( i_TimerCounter2Init==1)
+			}	/* if( i_TimerCounter2Init==1) */
 			else {
 		    /***************/
 				/* Set RCC */
 		    /***************/
 
 				i_CommandAndStatusValue = 0x8;
-			}	//elseif(i_TimerCounter2Init==1)
+			}	/* elseif(i_TimerCounter2Init==1) */
 
 		/********************************************/
 			/* Selects the commands and status register */
@@ -2283,14 +2283,14 @@ int i_APCI1500_ReadCounterTimerWatchdog(struct comedi_device * dev,
 			data[0] =
 				data[0] | inb(devpriv->iobase +
 				APCI1500_Z8536_CONTROL_REGISTER);
-		}		//if( i_TimerCounter2Init==1)
+		}		/* if( i_TimerCounter2Init==1) */
 		else {
 			printk("\nTimer/Counter2 not configured\n");
 			return -EINVAL;
-		}		//elseif( i_TimerCounter2Init==1)
+		}		/* elseif( i_TimerCounter2Init==1) */
 		break;
 	case COUNTER3:
-		//Read counter/watchdog2
+		/* Read counter/watchdog2 */
 		if (i_WatchdogCounter3Init == 1) {
 			if (i_WatchdogCounter3Enabled == 1) {
 		  /************************/
@@ -2298,14 +2298,14 @@ int i_APCI1500_ReadCounterTimerWatchdog(struct comedi_device * dev,
 		  /************************/
 
 				i_CommandAndStatusValue = 0xC;
-			}	//if( i_TimerCounter2Init==1)
+			}	/* if( i_TimerCounter2Init==1) */
 			else {
 		    /***************/
 				/* Set RCC */
 		    /***************/
 
 				i_CommandAndStatusValue = 0x8;
-			}	//elseif(i_WatchdogCounter3Init==1)
+			}	/* elseif(i_WatchdogCounter3Init==1) */
 
 		/********************************************/
 			/* Selects the commands and status register */
@@ -2334,16 +2334,16 @@ int i_APCI1500_ReadCounterTimerWatchdog(struct comedi_device * dev,
 			data[0] =
 				data[0] | inb(devpriv->iobase +
 				APCI1500_Z8536_CONTROL_REGISTER);
-		}		//if( i_WatchdogCounter3Init==1)
+		}		/* if( i_WatchdogCounter3Init==1) */
 		else {
 			printk("\nWatchdogCounter3 not configured\n");
 			return -EINVAL;
-		}		//elseif( i_WatchdogCounter3Init==1)
+		}		/* elseif( i_WatchdogCounter3Init==1) */
 		break;
 	default:
 		printk("\nThe choice of timer/counter/watchdog does not exist\n");
 		return -EINVAL;
-	}			//switch(data[0])
+	}			/* switch(data[0]) */
 
 	return insn->n;
 }
@@ -2352,13 +2352,13 @@ int i_APCI1500_ReadCounterTimerWatchdog(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 | Function   Name   : int  i_APCI1500_ReadInterruptMask                      |
 |			(struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,
-                    unsigned int *data); 	                                     |
+|                    unsigned int *data); 	                                     |
 +----------------------------------------------------------------------------+
 | Task              : Read the interrupt mask                                |
 +----------------------------------------------------------------------------+
 | Input Parameters  :   struct comedi_device *dev      : Driver handle              |
 |                     struct comedi_subdevice *s,   :pointer to subdevice structure
-                      struct comedi_insn *insn      :pointer to insn structure      |
+|                      struct comedi_insn *insn      :pointer to insn structure      |
 |                     unsigned int *data          : Data Pointer to read status  |
 
 
@@ -2370,8 +2370,8 @@ int i_APCI1500_ReadCounterTimerWatchdog(struct comedi_device * dev,
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-int i_APCI1500_ReadInterruptMask(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1500_ReadInterruptMask(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	data[0] = i_InterruptMask;
 	data[1] = i_InputChannel;
@@ -2383,15 +2383,15 @@ int i_APCI1500_ReadInterruptMask(struct comedi_device * dev, struct comedi_subde
 +----------------------------------------------------------------------------+
 | Function   Name   : int  i_APCI1500_ConfigureInterrupt                     |
 |			(struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,
-                    unsigned int *data); 	                                     |
+|                    unsigned int *data); 	                                     |
 +----------------------------------------------------------------------------+
 | Task              : Configures the interrupt registers                     |
 +----------------------------------------------------------------------------+
 | Input Parameters  :   struct comedi_device *dev      : Driver handle              |
 |                     struct comedi_subdevice *s,   :pointer to subdevice structure
-                      struct comedi_insn *insn      :pointer to insn structure      |
+|                      struct comedi_insn *insn      :pointer to insn structure      |
 |                     unsigned int *data          : Data Pointer                 |
-
+|
 
 +----------------------------------------------------------------------------+
 | Output Parameters :	--
@@ -2401,26 +2401,26 @@ int i_APCI1500_ReadInterruptMask(struct comedi_device * dev, struct comedi_subde
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-int i_APCI1500_ConfigureInterrupt(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1500_ConfigureInterrupt(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_Status;
+	unsigned int ui_Status;
 	int i_RegValue;
 	int i_Constant;
 	devpriv->tsk_Current = current;
 	outl(0x0, devpriv->i_IobaseAmcc + 0x38);
 	if (data[0] == 1) {
 		i_Constant = 0xC0;
-	}			//if(data[0]==1)
+	}			/* if(data[0]==1) */
 	else {
 		if (data[0] == 0) {
 			i_Constant = 0x00;
-		}		//if{data[0]==0)
+		}		/* if{data[0]==0) */
 		else {
 			printk("\nThe parameter passed to driver is in error for enabling the voltage interrupt\n");
 			return -EINVAL;
-		}		//else if(data[0]==0)
-	}			//elseif(data[0]==1)
+		}		/* else if(data[0]==0) */
+	}			/* elseif(data[0]==1) */
 
 	 /*****************************************************/
 	/* Selects the mode specification register of port B */
@@ -2580,7 +2580,7 @@ static void v_APCI1500_Interrupt(int irq, void *d)
 {
 
 	struct comedi_device *dev = d;
-	UINT ui_InterruptStatus = 0;
+	unsigned int ui_InterruptStatus = 0;
 	int i_RegValue = 0;
 	i_InterruptMask = 0;
 
@@ -2599,11 +2599,11 @@ static void v_APCI1500_Interrupt(int irq, void *d)
       /*************************************************/
 		/* Selects the master interrupt control register */
       /*************************************************/
-		//outb(APCI1500_RW_MASTER_INTERRUPT_CONTROL,devpriv->iobase+APCI1500_Z8536_CONTROL_REGISTER);
+		/* outb(APCI1500_RW_MASTER_INTERRUPT_CONTROL,devpriv->iobase+APCI1500_Z8536_CONTROL_REGISTER); */
 	/**********************************************/
 		/* Disables  the main interrupt on the board */
 	/**********************************************/
-		//outb(0x00,devpriv->iobase+APCI1500_Z8536_CONTROL_REGISTER);
+		/* outb(0x00,devpriv->iobase+APCI1500_Z8536_CONTROL_REGISTER); */
 
    /*****************************************************/
 		/* Selects the command and status register of port A */
@@ -2647,11 +2647,11 @@ static void v_APCI1500_Interrupt(int irq, void *d)
 
 				i_InputChannel = 1 + (i_RegValue >> 1);
 
-			}	// if(i_Logic==APCI1500_OR_PRIORITY)
+			}	/*  if(i_Logic==APCI1500_OR_PRIORITY) */
 			else {
 				i_InputChannel = 0;
-			}	//elseif(i_Logic==APCI1500_OR_PRIORITY)
-		}		// if ((i_RegValue & 0x60) == 0x60)
+			}	/* elseif(i_Logic==APCI1500_OR_PRIORITY) */
+		}		/*  if ((i_RegValue & 0x60) == 0x60) */
 
 	   /*****************************************************/
 		/* Selects the command and status register of port B */
@@ -2679,7 +2679,7 @@ static void v_APCI1500_Interrupt(int irq, void *d)
 			/* Reads port B */
 	     /****************/
 			i_RegValue =
-				inb((UINT) devpriv->iobase +
+				inb((unsigned int) devpriv->iobase +
 				APCI1500_Z8536_PORT_B);
 
 			i_RegValue = i_RegValue & 0xC0;
@@ -2688,7 +2688,7 @@ static void v_APCI1500_Interrupt(int irq, void *d)
 	      /**************************************/
 
 			if (i_RegValue) {
-				//Disable the interrupt
+				/* Disable the interrupt */
 		     /*****************************************************/
 				/* Selects the command and status register of port B */
 		     /*****************************************************/
@@ -2697,17 +2697,17 @@ static void v_APCI1500_Interrupt(int irq, void *d)
 				if (i_RegValue & 0x80) {
 					i_InterruptMask =
 						i_InterruptMask | 0x40;
-				}	//if (i_RegValue & 0x80)
+				}	/* if (i_RegValue & 0x80) */
 
 				if (i_RegValue & 0x40) {
 					i_InterruptMask =
 						i_InterruptMask | 0x80;
-				}	//if (i_RegValue & 0x40)
-			}	// if (i_RegValue)
+				}	/* if (i_RegValue & 0x40) */
+			}	/*  if (i_RegValue) */
 			else {
 				i_InterruptMask = i_InterruptMask | 2;
-			}	// if (i_RegValue)
-		}		//if ((i_RegValue & 0x60) == 0x60)
+			}	/*  if (i_RegValue) */
+		}		/* if ((i_RegValue & 0x60) == 0x60) */
 
 		/*****************************************************/
 		/* Selects the command and status register of timer 1 */
@@ -2731,7 +2731,7 @@ static void v_APCI1500_Interrupt(int irq, void *d)
 				devpriv->iobase +
 				APCI1500_Z8536_CONTROL_REGISTER);
 			i_InterruptMask = i_InterruptMask | 4;
-		}		// if ((i_RegValue & 0x60) == 0x60)
+		}		/*  if ((i_RegValue & 0x60) == 0x60) */
 		/*****************************************************/
 		/* Selects the command and status register of timer 2 */
 		/*****************************************************/
@@ -2754,7 +2754,7 @@ static void v_APCI1500_Interrupt(int irq, void *d)
 				devpriv->iobase +
 				APCI1500_Z8536_CONTROL_REGISTER);
 			i_InterruptMask = i_InterruptMask | 8;
-		}		// if ((i_RegValue & 0x60) == 0x60)
+		}		/*  if ((i_RegValue & 0x60) == 0x60) */
 
 		/*****************************************************/
 		/* Selects the command and status register of timer 3 */
@@ -2779,13 +2779,13 @@ static void v_APCI1500_Interrupt(int irq, void *d)
 				APCI1500_Z8536_CONTROL_REGISTER);
 			if (i_CounterLogic == APCI1500_COUNTER) {
 				i_InterruptMask = i_InterruptMask | 0x10;
-			}	//if(i_CounterLogic==APCI1500_COUNTER)
+			}	/* if(i_CounterLogic==APCI1500_COUNTER) */
 			else {
 				i_InterruptMask = i_InterruptMask | 0x20;
 			}
-		}		// if ((i_RegValue & 0x60) == 0x60)
+		}		/*  if ((i_RegValue & 0x60) == 0x60) */
 
-		send_sig(SIGIO, devpriv->tsk_Current, 0);	// send signal to the sample
+		send_sig(SIGIO, devpriv->tsk_Current, 0);	/*  send signal to the sample */
 	       /***********************/
 		/* Enable all Interrupts */
 	       /***********************/
@@ -2799,11 +2799,11 @@ static void v_APCI1500_Interrupt(int irq, void *d)
 		/* Authorizes the main interrupt on the board */
 	       /**********************************************/
 		outb(0xD0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
-	}			//  if ((ui_InterruptStatus & 0x800000) == 0x800000)
+	}			/*   if ((ui_InterruptStatus & 0x800000) == 0x800000) */
 	else {
 		printk("\nInterrupt from unknown source\n");
 
-	}			//else if ((ui_InterruptStatus & 0x800000) == 0x800000)
+	}			/* else if ((ui_InterruptStatus & 0x800000) == 0x800000) */
 	return;
 }
 
@@ -2822,7 +2822,7 @@ static void v_APCI1500_Interrupt(int irq, void *d)
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1500_Reset(struct comedi_device * dev)
+int i_APCI1500_Reset(struct comedi_device *dev)
 {
 	int i_DummyRead = 0;
 	i_TimerCounter1Init = 0;
@@ -2982,7 +2982,7 @@ INT i_APCI1500_Reset(struct comedi_device * dev)
 		devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
 	/* Deletes all interrupts */
 	outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
-	//reset all the digital outputs
+	/* reset all the digital outputs */
 	outw(0x0, devpriv->i_IobaseAddon + APCI1500_DIGITAL_OP);
 /*******************************/
 /* Disable the board interrupt */
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.h
index 5d960b40a6a..057903366a8 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.h
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.h
@@ -17,11 +17,11 @@
 
 /*********      Definitions for APCI-1500 card  *****/
 
-// Card Specific information
+/* Card Specific information */
 #define APCI1500_BOARD_VENDOR_ID           0x10e8
 #define APCI1500_ADDRESS_RANGE              4
 
-//DIGITAL INPUT-OUTPUT DEFINE
+/* DIGITAL INPUT-OUTPUT DEFINE */
 
 #define  APCI1500_DIGITAL_OP                 	2
 #define  APCI1500_DIGITAL_IP                    0
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.c
index 5ae9a93844e..38416356628 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.c
@@ -3,13 +3,13 @@
 
 Copyright (C) 2004,2005  ADDI-DATA GmbH for the source code of this module.
 
-        ADDI-DATA GmbH
-        Dieselstrasse 3
-        D-77833 Ottersweier
-        Tel: +19(0)7223/9493-0
-        Fax: +49(0)7223/9493-92
-        http://www.addi-data-com
-        info@addi-data.com
+	ADDI-DATA GmbH
+	Dieselstrasse 3
+	D-77833 Ottersweier
+	Tel: +19(0)7223/9493-0
+	Fax: +49(0)7223/9493-92
+	http://www.addi-data-com
+	info@addi-data.com
 
 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
 
@@ -63,7 +63,7 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev      : Driver handle                |
 |		       struct comedi_subdevice *s,   :pointer to subdevice structure
-                       struct comedi_insn *insn      :pointer to insn structure     |
+|                       struct comedi_insn *insn      :pointer to insn structure     |
 |                     unsigned int *data          : Data Pointer to read status  |
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
@@ -73,22 +73,22 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-INT i_APCI1516_Read1DigitalInput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1516_Read1DigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_TmpValue = 0;
-	UINT ui_Channel;
+	unsigned int ui_TmpValue = 0;
+	unsigned int ui_Channel;
 	ui_Channel = CR_CHAN(insn->chanspec);
 	if (ui_Channel >= 0 && ui_Channel <= 7) {
-		ui_TmpValue = (UINT) inw(devpriv->iobase + APCI1516_DIGITAL_IP);
-		//  since only 1 channel reqd  to bring it to last bit it is rotated
-		//  8 +(chan - 1) times then ANDed with 1 for last bit.
+		ui_TmpValue = (unsigned int) inw(devpriv->iobase + APCI1516_DIGITAL_IP);
+		/*   since only 1 channel reqd  to bring it to last bit it is rotated */
+		/*   8 +(chan - 1) times then ANDed with 1 for last bit. */
 		*data = (ui_TmpValue >> ui_Channel) & 0x1;
-	}			//if(ui_Channel >= 0 && ui_Channel <=7)
+	}			/* if(ui_Channel >= 0 && ui_Channel <=7) */
 	else {
-		//comedi_error(dev," \n chan spec wrong\n");
-		return -EINVAL;	// "sorry channel spec wrong "
-	}			//else if(ui_Channel >= 0 && ui_Channel <=7)
+		/* comedi_error(dev," \n chan spec wrong\n"); */
+		return -EINVAL;	/*  "sorry channel spec wrong " */
+	}			/* else if(ui_Channel >= 0 && ui_Channel <=7) */
 
 	return insn->n;
 }
@@ -103,7 +103,7 @@ INT i_APCI1516_Read1DigitalInput(struct comedi_device * dev, struct comedi_subde
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev      : Driver handle                |
 |                      struct comedi_subdevice *s,   :pointer to subdevice structure
-                       struct comedi_insn *insn      :pointer to insn structure     |
+|                       struct comedi_insn *insn      :pointer to insn structure     |
 |                      unsigned int *data         : Data Pointer to read status  |
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
@@ -114,17 +114,17 @@ INT i_APCI1516_Read1DigitalInput(struct comedi_device * dev, struct comedi_subde
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1516_ReadMoreDigitalInput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1516_ReadMoreDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 
-	UINT ui_PortValue = data[0];
-	UINT ui_Mask = 0;
-	UINT ui_NoOfChannels;
+	unsigned int ui_PortValue = data[0];
+	unsigned int ui_Mask = 0;
+	unsigned int ui_NoOfChannels;
 
 	ui_NoOfChannels = CR_CHAN(insn->chanspec);
 
-	*data = (UINT) inw(devpriv->iobase + APCI1516_DIGITAL_IP);
+	*data = (unsigned int) inw(devpriv->iobase + APCI1516_DIGITAL_IP);
 	switch (ui_NoOfChannels) {
 	case 2:
 		ui_Mask = 3;
@@ -139,9 +139,9 @@ INT i_APCI1516_ReadMoreDigitalInput(struct comedi_device * dev, struct comedi_su
 
 	default:
 		printk("\nWrong parameters\n");
-		return -EINVAL;	// "sorry channel spec wrong "
+		return -EINVAL;	/*  "sorry channel spec wrong " */
 		break;
-	}			//switch(ui_NoOfChannels)
+	}			/* switch(ui_NoOfChannels) */
 
 	return insn->n;
 }
@@ -149,7 +149,7 @@ INT i_APCI1516_ReadMoreDigitalInput(struct comedi_device * dev, struct comedi_su
 /*
 +----------------------------------------------------------------------------+
 | Function   Name   : int i_APCI1516_ConfigDigitalOutput (struct comedi_device *dev,
-                    struct comedi_subdevice *s struct comedi_insn *insn,unsigned int *data)    |
+|                    struct comedi_subdevice *s struct comedi_insn *insn,unsigned int *data)    |
 |				                                                     |
 +----------------------------------------------------------------------------+
 | Task              : Configures The Digital Output Subdevice.               |
@@ -158,7 +158,7 @@ INT i_APCI1516_ReadMoreDigitalInput(struct comedi_device * dev, struct comedi_su
 |                     unsigned int *data         : Data Pointer contains         |
 |                                          configuration parameters as below |
 |                      struct comedi_subdevice *s,   :pointer to subdevice structure
-                       struct comedi_insn *insn      :pointer to insn structure                                                           |
+|                      struct comedi_insn *insn      :pointer to insn structure                                                           |
 |					  data[0]  :1:Memory on                          |
 |					            0:Memory off                         |
 |										                             |
@@ -171,8 +171,8 @@ INT i_APCI1516_ReadMoreDigitalInput(struct comedi_device * dev, struct comedi_su
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-int i_APCI1516_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1516_ConfigDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	devpriv->b_OutputMemoryStatus = data[0];
 	return insn->n;
@@ -182,13 +182,13 @@ int i_APCI1516_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_sub
 +----------------------------------------------------------------------------+
 | Function   Name   : int i_APCI1516_WriteDigitalOutput                      |
 |			(struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,
-                     unsigned int *data)                                         |
+|                     unsigned int *data)                                         |
 +----------------------------------------------------------------------------+
 | Task              : Writes port value  To the selected port                |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev      : Driver handle                |
 |                     struct comedi_subdevice *s,   :pointer to subdevice structure
-                      struct comedi_insn *insn      :pointer to insn structure      |
+|                     struct comedi_insn *insn      :pointer to insn structure      |
 |                    unsigned int *data           : Data Pointer to read status  |
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
@@ -199,21 +199,21 @@ int i_APCI1516_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_sub
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1516_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1516_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_Temp, ui_Temp1;
-	UINT ui_NoOfChannel = CR_CHAN(insn->chanspec);	// get the channel
+	unsigned int ui_Temp, ui_Temp1;
+	unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec);	/*  get the channel */
 
 	printk("EL311003 : @=%x\n", devpriv->iobase + APCI1516_DIGITAL_OP);
 
 	if (devpriv->b_OutputMemoryStatus) {
 		ui_Temp = inw(devpriv->iobase + APCI1516_DIGITAL_OP);
 
-	}			//if(devpriv->b_OutputMemoryStatus )
+	}			/* if(devpriv->b_OutputMemoryStatus ) */
 	else {
 		ui_Temp = 0;
-	}			//if(devpriv->b_OutputMemoryStatus )
+	}			/* if(devpriv->b_OutputMemoryStatus ) */
 	if (data[3] == 0) {
 		if (data[1] == 0) {
 			data[0] = (data[0] << ui_NoOfChannel) | ui_Temp;
@@ -222,7 +222,7 @@ INT i_APCI1516_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 			printk("EL311003 : d=%d @=%x\n", data[0],
 				devpriv->iobase + APCI1516_DIGITAL_OP);
 
-		}		//if(data[1]==0)
+		}		/* if(data[1]==0) */
 		else {
 			if (data[1] == 1) {
 				switch (ui_NoOfChannel) {
@@ -245,21 +245,21 @@ INT i_APCI1516_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 
 				default:
 					comedi_error(dev, " chan spec wrong");
-					return -EINVAL;	// "sorry channel spec wrong "
+					return -EINVAL;	/*  "sorry channel spec wrong " */
 
-				}	//switch(ui_NoOfChannels)
+				}	/* switch(ui_NoOfChannels) */
 
 				outw(data[0],
 					devpriv->iobase + APCI1516_DIGITAL_OP);
 
 				printk("EL311003 : d=%d @=%x\n", data[0],
 					devpriv->iobase + APCI1516_DIGITAL_OP);
-			}	// if(data[1]==1)
+			}	/*  if(data[1]==1) */
 			else {
 				printk("\nSpecified channel not supported\n");
-			}	//else if(data[1]==1)
-		}		//elseif(data[1]==0)
-	}			//if(data[3]==0)
+			}	/* else if(data[1]==1) */
+		}		/* elseif(data[1]==0) */
+	}			/* if(data[3]==0) */
 	else {
 		if (data[3] == 1) {
 			if (data[1] == 0) {
@@ -275,7 +275,7 @@ INT i_APCI1516_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 				printk("EL311003 : d=%d @=%x\n", data[0],
 					devpriv->iobase + APCI1516_DIGITAL_OP);
 
-			}	//if(data[1]==0)
+			}	/* if(data[1]==0) */
 			else {
 				if (data[1] == 1) {
 					switch (ui_NoOfChannel) {
@@ -312,9 +312,9 @@ INT i_APCI1516_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 					default:
 						comedi_error(dev,
 							" chan spec wrong");
-						return -EINVAL;	// "sorry channel spec wrong "
+						return -EINVAL;	/*  "sorry channel spec wrong " */
 
-					}	//switch(ui_NoOfChannels)
+					}	/* switch(ui_NoOfChannels) */
 
 					outw(data[0],
 						devpriv->iobase +
@@ -324,17 +324,17 @@ INT i_APCI1516_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 						data[0],
 						devpriv->iobase +
 						APCI1516_DIGITAL_OP);
-				}	// if(data[1]==1)
+				}	/*  if(data[1]==1) */
 				else {
 					printk("\nSpecified channel not supported\n");
-				}	//else if(data[1]==1)
-			}	//elseif(data[1]==0)
-		}		//if(data[3]==1);
+				}	/* else if(data[1]==1) */
+			}	/* elseif(data[1]==0) */
+		}		/* if(data[3]==1); */
 		else {
 			printk("\nSpecified functionality does not exist\n");
 			return -EINVAL;
-		}		//if else data[3]==1)
-	}			//if else data[3]==0)
+		}		/* if else data[3]==1) */
+	}			/* if else data[3]==0) */
 	return (insn->n);;
 }
 
@@ -342,13 +342,13 @@ INT i_APCI1516_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 +----------------------------------------------------------------------------+
 | Function   Name   : int i_APCI1516_ReadDigitalOutput                       |
 |			(struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,
-                    unsigned int *data) 	                                     |
+|                    unsigned int *data) 	                                     |
 +----------------------------------------------------------------------------+
 | Task              : Read  value  of the selected channel or port           |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev      : Driver handle                |
 |                     struct comedi_subdevice *s,   :pointer to subdevice structure
-                      struct comedi_insn *insn      :pointer to insn structure      |
+|                     struct comedi_insn *insn      :pointer to insn structure      |
 |                     unsigned int *data          : Data Pointer to read status  |
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
@@ -359,17 +359,17 @@ INT i_APCI1516_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1516_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1516_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 
-	UINT ui_Temp;
-	UINT ui_NoOfChannel = CR_CHAN(insn->chanspec);	// get the channel
+	unsigned int ui_Temp;
+	unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec);	/*  get the channel */
 	ui_Temp = data[0];
 	*data = inw(devpriv->iobase + APCI1516_DIGITAL_OP_RW);
 	if (ui_Temp == 0) {
 		*data = (*data >> ui_NoOfChannel) & 0x1;
-	}			//if(ui_Temp==0)
+	}			/* if(ui_Temp==0) */
 	else {
 		if (ui_Temp == 1) {
 			switch (ui_NoOfChannel) {
@@ -387,28 +387,28 @@ INT i_APCI1516_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subde
 
 			default:
 				comedi_error(dev, " chan spec wrong");
-				return -EINVAL;	// "sorry channel spec wrong "
+				return -EINVAL;	/*  "sorry channel spec wrong " */
 
-			}	//switch(ui_NoOfChannels)
-		}		//if(ui_Temp==1)
+			}	/* switch(ui_NoOfChannels) */
+		}		/* if(ui_Temp==1) */
 		else {
 			printk("\nSpecified channel not supported \n");
-		}		//elseif(ui_Temp==1)
-	}			//elseif(ui_Temp==0)
+		}		/* elseif(ui_Temp==1) */
+	}			/* elseif(ui_Temp==0) */
 	return insn->n;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function   Name   : int i_APCI1516_ConfigWatchdog(struct comedi_device *dev,
-                      struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data)  |
+|                      struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data)  |
 |				                                                     |
 +----------------------------------------------------------------------------+
 | Task              : Configures The Watchdog                                |
 +----------------------------------------------------------------------------+
 | Input Parameters  :   struct comedi_device *dev      : Driver handle              |
 |                     struct comedi_subdevice *s,   :pointer to subdevice structure
-                      struct comedi_insn *insn      :pointer to insn structure      |
+|                      struct comedi_insn *insn      :pointer to insn structure      |
 |                     unsigned int *data          : Data Pointer to read status                                                     |
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
@@ -419,15 +419,15 @@ INT i_APCI1516_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subde
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI1516_ConfigWatchdog(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1516_ConfigWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (data[0] == 0) {
-		//Disable the watchdog
+		/* Disable the watchdog */
 		outw(0x0,
 			devpriv->i_IobaseAddon +
 			APCI1516_WATCHDOG_ENABLEDISABLE);
-		//Loading the Reload value
+		/* Loading the Reload value */
 		outw(data[1],
 			devpriv->i_IobaseAddon +
 			APCI1516_WATCHDOG_RELOAD_VALUE);
@@ -435,11 +435,11 @@ int i_APCI1516_ConfigWatchdog(struct comedi_device * dev, struct comedi_subdevic
 		outw(data[1],
 			devpriv->i_IobaseAddon +
 			APCI1516_WATCHDOG_RELOAD_VALUE + 2);
-	}			//if(data[0]==0)
+	}			/* if(data[0]==0) */
 	else {
 		printk("\nThe input parameters are wrong\n");
 		return -EINVAL;
-	}			//elseif(data[0]==0)
+	}			/* elseif(data[0]==0) */
 
 	return insn->n;
 }
@@ -465,19 +465,19 @@ int i_APCI1516_ConfigWatchdog(struct comedi_device * dev, struct comedi_subdevic
     +----------------------------------------------------------------------------+
   */
 
-int i_APCI1516_StartStopWriteWatchdog(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1516_StartStopWriteWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	switch (data[0]) {
-	case 0:		//stop the watchdog
-		outw(0x0, devpriv->i_IobaseAddon + APCI1516_WATCHDOG_ENABLEDISABLE);	//disable the watchdog
+	case 0:		/* stop the watchdog */
+		outw(0x0, devpriv->i_IobaseAddon + APCI1516_WATCHDOG_ENABLEDISABLE);	/* disable the watchdog */
 		break;
-	case 1:		//start the watchdog
+	case 1:		/* start the watchdog */
 		outw(0x0001,
 			devpriv->i_IobaseAddon +
 			APCI1516_WATCHDOG_ENABLEDISABLE);
 		break;
-	case 2:		//Software trigger
+	case 2:		/* Software trigger */
 		outw(0x0201,
 			devpriv->i_IobaseAddon +
 			APCI1516_WATCHDOG_ENABLEDISABLE);
@@ -485,7 +485,7 @@ int i_APCI1516_StartStopWriteWatchdog(struct comedi_device * dev, struct comedi_
 	default:
 		printk("\nSpecified functionality does not exist\n");
 		return -EINVAL;
-	}			// switch(data[0])
+	}			/*  switch(data[0]) */
 	return insn->n;
 }
 
@@ -510,8 +510,8 @@ int i_APCI1516_StartStopWriteWatchdog(struct comedi_device * dev, struct comedi_
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI1516_ReadWatchdog(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1516_ReadWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	data[0] = inw(devpriv->i_IobaseAddon + APCI1516_WATCHDOG_STATUS) & 0x1;
 	return insn->n;
@@ -532,9 +532,9 @@ int i_APCI1516_ReadWatchdog(struct comedi_device * dev, struct comedi_subdevice
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1516_Reset(struct comedi_device * dev)
+int i_APCI1516_Reset(struct comedi_device *dev)
 {
-	outw(0x0, devpriv->iobase + APCI1516_DIGITAL_OP);	//RESETS THE DIGITAL OUTPUTS
+	outw(0x0, devpriv->iobase + APCI1516_DIGITAL_OP);	/* RESETS THE DIGITAL OUTPUTS */
 	outw(0x0, devpriv->i_IobaseAddon + APCI1516_WATCHDOG_ENABLEDISABLE);
 	outw(0x0, devpriv->i_IobaseAddon + APCI1516_WATCHDOG_RELOAD_VALUE);
 	outw(0x0, devpriv->i_IobaseAddon + APCI1516_WATCHDOG_RELOAD_VALUE + 2);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.h
index 398baa04a16..21c09ed01b1 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.h
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.h
@@ -17,17 +17,17 @@
 
 /*********      Definitions for APCI-1516 card  *****/
 
-// Card Specific information
+/* Card Specific information */
 #define APCI1516_BOARD_VENDOR_ID                 0x15B8
 #define APCI1516_ADDRESS_RANGE                   8
 
-//DIGITAL INPUT-OUTPUT DEFINE
+/* DIGITAL INPUT-OUTPUT DEFINE */
 
 #define APCI1516_DIGITAL_OP                 	4
 #define APCI1516_DIGITAL_OP_RW                 	4
 #define APCI1516_DIGITAL_IP                     0
 
-// TIMER COUNTER WATCHDOG DEFINES
+/* TIMER COUNTER WATCHDOG DEFINES */
 
 #define ADDIDATA_WATCHDOG                          2
 #define APCI1516_DIGITAL_OP_WATCHDOG               0
@@ -35,24 +35,25 @@
 #define APCI1516_WATCHDOG_RELOAD_VALUE             4
 #define APCI1516_WATCHDOG_STATUS                   16
 
-// Hardware Layer  functions for Apci1516
+/* Hardware Layer  functions for Apci1516 */
 
-//Digital Input
-INT i_APCI1516_ReadMoreDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
+/* Digital Input */
+int i_APCI1516_ReadMoreDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
 				    struct comedi_insn *insn, unsigned int *data);
-INT i_APCI1516_Read1DigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI1516_Read1DigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
 				 struct comedi_insn *insn, unsigned int *data);
 
-//Digital Output
+/* Digital Output */
 int i_APCI1516_ConfigDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
 				   struct comedi_insn *insn, unsigned int *data);
-INT i_APCI1516_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI1516_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
 				  struct comedi_insn *insn, unsigned int *data);
-INT i_APCI1516_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI1516_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
 				 struct comedi_insn *insn, unsigned int *data);
 
-// TIMER
-// timer value is passed as u seconds
+/*
+* TIMER timer value is passed as u seconds
+*/
 int i_APCI1516_ConfigWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
 			      struct comedi_insn *insn, unsigned int *data);
 int i_APCI1516_StartStopWriteWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
@@ -60,5 +61,5 @@ int i_APCI1516_StartStopWriteWatchdog(struct comedi_device *dev, struct comedi_s
 int i_APCI1516_ReadWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
 			    struct comedi_insn *insn, unsigned int *data);
 
-//reset
-INT i_APCI1516_Reset(struct comedi_device *dev);
+/* reset */
+int i_APCI1516_Reset(struct comedi_device *dev);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
index a6b504c3d39..3a47c303422 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
@@ -3,13 +3,13 @@
 
 Copyright (C) 2004,2005  ADDI-DATA GmbH for the source code of this module.
 
-        ADDI-DATA GmbH
-        Dieselstrasse 3
-        D-77833 Ottersweier
-        Tel: +19(0)7223/9493-0
-        Fax: +49(0)7223/9493-92
-        http://www.addi-data-com
-        info@addi-data.com
+	ADDI-DATA GmbH
+	Dieselstrasse 3
+	D-77833 Ottersweier
+	Tel: +19(0)7223/9493-0
+	Fax: +49(0)7223/9493-92
+	http://www.addi-data-com
+	info@addi-data.com
 
 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
 
@@ -55,9 +55,9 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 #include <linux/delay.h>
 #include "hwdrv_apci1564.h"
 
-//Global variables
-UINT ui_InterruptStatus_1564 = 0;
-UINT ui_InterruptData, ui_Type;
+/* Global variables */
+unsigned int ui_InterruptStatus_1564 = 0;
+unsigned int ui_InterruptData, ui_Type;
 
 /*
 +----------------------------------------------------------------------------+
@@ -86,8 +86,8 @@ UINT ui_InterruptData, ui_Type;
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-INT i_APCI1564_ConfigDigitalInput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1564_ConfigDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	devpriv->tsk_Current = current;
    /*******************************/
@@ -106,13 +106,13 @@ INT i_APCI1564_ConfigDigitalInput(struct comedi_device * dev, struct comedi_subd
 			outl(0x4,
 				devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP +
 				APCI1564_DIGITAL_IP_IRQ);
-		}		// if  (data[1] == ADDIDATA_OR)
+		}		/*  if  (data[1] == ADDIDATA_OR) */
 		else {
 			outl(0x6,
 				devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP +
 				APCI1564_DIGITAL_IP_IRQ);
-		}		// else if  (data[1] == ADDIDATA_OR)
-	}			// if  (data[0] == ADDIDATA_ENABLE)
+		}		/*  else if  (data[1] == ADDIDATA_OR) */
+	}			/*  if  (data[0] == ADDIDATA_ENABLE) */
 	else {
 		outl(0x0,
 			devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP +
@@ -123,7 +123,7 @@ INT i_APCI1564_ConfigDigitalInput(struct comedi_device * dev, struct comedi_subd
 		outl(0x0,
 			devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP +
 			APCI1564_DIGITAL_IP_IRQ);
-	}			// else if  (data[0] == ADDIDATA_ENABLE)
+	}			/*  else if  (data[0] == ADDIDATA_ENABLE) */
 
 	return insn->n;
 }
@@ -137,7 +137,7 @@ INT i_APCI1564_ConfigDigitalInput(struct comedi_device * dev, struct comedi_subd
 | Task              : Return the status of the digital input                 |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev      : Driver handle                |
-|		              UINT ui_Channel : Channel number to read       |
+|		              unsigned int ui_Channel : Channel number to read       |
 |                     unsigned int *data          : Data Pointer to read status  |
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
@@ -147,24 +147,26 @@ INT i_APCI1564_ConfigDigitalInput(struct comedi_device * dev, struct comedi_subd
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-INT i_APCI1564_Read1DigitalInput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1564_Read1DigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_TmpValue = 0;
-	UINT ui_Channel;
+	unsigned int ui_TmpValue = 0;
+	unsigned int ui_Channel;
 
 	ui_Channel = CR_CHAN(insn->chanspec);
 	if (ui_Channel >= 0 && ui_Channel <= 31) {
 		ui_TmpValue =
-			(UINT) inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP);
-		//  since only 1 channel reqd  to bring it to last bit it is rotated
-		//  8 +(chan - 1) times then ANDed with 1 for last bit.
+			(unsigned int) inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP);
+/*
+* since only 1 channel reqd to bring it to last bit it is rotated 8
+* +(chan - 1) times then ANDed with 1 for last bit.
+*/
 		*data = (ui_TmpValue >> ui_Channel) & 0x1;
-	}			// if  (ui_Channel >= 0 && ui_Channel <=31)
+	}			/*  if  (ui_Channel >= 0 && ui_Channel <=31) */
 	else {
 		comedi_error(dev, "Not a valid channel number !!! \n");
-		return -EINVAL;	// "sorry channel spec wrong "
-	}			//else if  (ui_Channel >= 0 && ui_Channel <=31)
+		return -EINVAL;	/*  "sorry channel spec wrong " */
+	}			/* else if  (ui_Channel >= 0 && ui_Channel <=31) */
 	return insn->n;
 }
 
@@ -177,8 +179,8 @@ INT i_APCI1564_Read1DigitalInput(struct comedi_device * dev, struct comedi_subde
 | Task              : Return the status of the Requested digital inputs      |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev      : Driver handle                |
-|                     UINT ui_NoOfChannels    : No Of Channels To be Read    |
-|                      UINT *data             : Data Pointer to read status  |
+|                     unsigned int ui_NoOfChannels    : No Of Channels To be Read    |
+|                      unsigned int *data             : Data Pointer to read status  |
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
 +----------------------------------------------------------------------------+
@@ -187,16 +189,16 @@ INT i_APCI1564_Read1DigitalInput(struct comedi_device * dev, struct comedi_subde
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-INT i_APCI1564_ReadMoreDigitalInput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1564_ReadMoreDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_PortValue = data[0];
-	UINT ui_Mask = 0;
-	UINT ui_NoOfChannels;
+	unsigned int ui_PortValue = data[0];
+	unsigned int ui_Mask = 0;
+	unsigned int ui_NoOfChannels;
 
 	ui_NoOfChannels = CR_CHAN(insn->chanspec);
 	if (data[1] == 0) {
-		*data = (UINT) inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP);
+		*data = (unsigned int) inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP);
 		switch (ui_NoOfChannels) {
 		case 2:
 			ui_Mask = 3;
@@ -218,15 +220,15 @@ INT i_APCI1564_ReadMoreDigitalInput(struct comedi_device * dev, struct comedi_su
 			break;
 		default:
 			comedi_error(dev, "Not a valid Channel number !!!\n");
-			return -EINVAL;	// "sorry channel spec wrong "
+			return -EINVAL;	/*  "sorry channel spec wrong " */
 			break;
-		}		// switch  (ui_NoOfChannels)
-	}			// if  (data[1]==0)
+		}		/*  switch  (ui_NoOfChannels) */
+	}			/*  if  (data[1]==0) */
 	else {
 		if (data[1] == 1) {
 			*data = ui_InterruptStatus_1564;
-		}		// if  (data[1]==1)
-	}			// else if  (data[1]==0)
+		}		/*  if  (data[1]==1) */
+	}			/*  else if  (data[1]==0) */
 	return insn->n;
 }
 
@@ -239,7 +241,7 @@ INT i_APCI1564_ReadMoreDigitalInput(struct comedi_device * dev, struct comedi_su
 | Task              : Configures The Digital Output Subdevice.               |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev : Driver handle                     |
-|                     UINT *data         : Data Pointer contains             |
+|                     unsigned int *data         : Data Pointer contains             |
 |                                          configuration parameters as below |
 |                                                                            |
 |					  data[1]            : 1 Enable  VCC  Interrupt  |
@@ -255,34 +257,34 @@ INT i_APCI1564_ReadMoreDigitalInput(struct comedi_device * dev, struct comedi_su
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-INT i_APCI1564_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1564_ConfigDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	ULONG ul_Command = 0;
+	unsigned int ul_Command = 0;
 
 	if ((data[0] != 0) && (data[0] != 1)) {
 		comedi_error(dev,
 			"Not a valid Data !!! ,Data should be 1 or 0\n");
 		return -EINVAL;
-	}			// if  ((data[0]!=0) && (data[0]!=1))
+	}			/*  if  ((data[0]!=0) && (data[0]!=1)) */
 	if (data[0]) {
 		devpriv->b_OutputMemoryStatus = ADDIDATA_ENABLE;
-	}			// if  (data[0])
+	}			/*  if  (data[0]) */
 	else {
 		devpriv->b_OutputMemoryStatus = ADDIDATA_DISABLE;
-	}			// else if  (data[0])
+	}			/*  else if  (data[0]) */
 	if (data[1] == ADDIDATA_ENABLE) {
 		ul_Command = ul_Command | 0x1;
-	}			// if  (data[1] == ADDIDATA_ENABLE)
+	}			/*  if  (data[1] == ADDIDATA_ENABLE) */
 	else {
 		ul_Command = ul_Command & 0xFFFFFFFE;
-	}			// else if  (data[1] == ADDIDATA_ENABLE)
+	}			/*  else if  (data[1] == ADDIDATA_ENABLE) */
 	if (data[2] == ADDIDATA_ENABLE) {
 		ul_Command = ul_Command | 0x2;
-	}			// if  (data[2] == ADDIDATA_ENABLE)
+	}			/*  if  (data[2] == ADDIDATA_ENABLE) */
 	else {
 		ul_Command = ul_Command & 0xFFFFFFFD;
-	}			// else if  (data[2] == ADDIDATA_ENABLE)
+	}			/*  else if  (data[2] == ADDIDATA_ENABLE) */
 	outl(ul_Command,
 		devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP +
 		APCI1564_DIGITAL_OP_INTERRUPT);
@@ -302,8 +304,8 @@ INT i_APCI1564_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_sub
 | Task              : Writes port value  To the selected port                |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev      : Driver handle                |
-|                     UINT ui_NoOfChannels    : No Of Channels To Write      |
-|                     UINT *data              : Data Pointer to read status  |
+|                     unsigned int ui_NoOfChannels    : No Of Channels To Write      |
+|                     unsigned int *data              : Data Pointer to read status  |
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
 +----------------------------------------------------------------------------+
@@ -312,28 +314,28 @@ INT i_APCI1564_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_sub
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-INT i_APCI1564_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1564_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_Temp, ui_Temp1;
-	UINT ui_NoOfChannel;
+	unsigned int ui_Temp, ui_Temp1;
+	unsigned int ui_NoOfChannel;
 
 	ui_NoOfChannel = CR_CHAN(insn->chanspec);
 	if (devpriv->b_OutputMemoryStatus) {
 		ui_Temp =
 			inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP +
 			APCI1564_DIGITAL_OP_RW);
-	}			// if  (devpriv->b_OutputMemoryStatus )
+	}			/*  if  (devpriv->b_OutputMemoryStatus ) */
 	else {
 		ui_Temp = 0;
-	}			// else if  (devpriv->b_OutputMemoryStatus )
+	}			/*  else if  (devpriv->b_OutputMemoryStatus ) */
 	if (data[3] == 0) {
 		if (data[1] == 0) {
 			data[0] = (data[0] << ui_NoOfChannel) | ui_Temp;
 			outl(data[0],
 				devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP +
 				APCI1564_DIGITAL_OP_RW);
-		}		// if  (data[1]==0)
+		}		/*  if  (data[1]==0) */
 		else {
 			if (data[1] == 1) {
 				switch (ui_NoOfChannel) {
@@ -362,18 +364,18 @@ INT i_APCI1564_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 					break;
 				default:
 					comedi_error(dev, " chan spec wrong");
-					return -EINVAL;	// "sorry channel spec wrong "
-				}	// switch (ui_NoOfChannels)
+					return -EINVAL;	/*  "sorry channel spec wrong " */
+				}	/*  switch (ui_NoOfChannels) */
 				outl(data[0],
 					devpriv->i_IobaseAmcc +
 					APCI1564_DIGITAL_OP +
 					APCI1564_DIGITAL_OP_RW);
-			}	// if  (data[1]==1)
+			}	/*  if  (data[1]==1) */
 			else {
 				printk("\nSpecified channel not supported\n");
-			}	// else if  (data[1]==1)
-		}		// else if (data[1]==0)
-	}			//if(data[3]==0)
+			}	/*  else if  (data[1]==1) */
+		}		/*  else if (data[1]==0) */
+	}			/* if(data[3]==0) */
 	else {
 		if (data[3] == 1) {
 			if (data[1] == 0) {
@@ -389,7 +391,7 @@ INT i_APCI1564_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 					devpriv->i_IobaseAmcc +
 					APCI1564_DIGITAL_OP +
 					APCI1564_DIGITAL_OP_RW);
-			}	// if  (data[1]==0)
+			}	/*  if  (data[1]==0) */
 			else {
 				if (data[1] == 1) {
 					switch (ui_NoOfChannel) {
@@ -447,23 +449,23 @@ INT i_APCI1564_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 					default:
 						comedi_error(dev,
 							" chan spec wrong");
-						return -EINVAL;	// "sorry channel spec wrong "
-					}	//switch(ui_NoOfChannels)
+						return -EINVAL;	/*  "sorry channel spec wrong " */
+					}	/* switch(ui_NoOfChannels) */
 					outl(data[0],
 						devpriv->i_IobaseAmcc +
 						APCI1564_DIGITAL_OP +
 						APCI1564_DIGITAL_OP_RW);
-				}	// if  (data[1]==1)
+				}	/*  if  (data[1]==1) */
 				else {
 					printk("\nSpecified channel not supported\n");
-				}	// else if  (data[1]==1)
-			}	// else if  (data[1]==0)
-		}		// if  (data[3]==1);
+				}	/*  else if  (data[1]==1) */
+			}	/*  else if  (data[1]==0) */
+		}		/*  if  (data[3]==1); */
 		else {
 			printk("\nSpecified functionality does not exist\n");
 			return -EINVAL;
-		}		// else if (data[3]==1)
-	}			// else if (data[3]==0)
+		}		/*  else if (data[3]==1) */
+	}			/*  else if (data[3]==0) */
 	return insn->n;
 }
 
@@ -476,8 +478,8 @@ INT i_APCI1564_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 | Task              : Read  value  of the selected channel or port           |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev      : Driver handle                |
-|                     UINT ui_NoOfChannels    : No Of Channels To read       |
-|                     UINT *data              : Data Pointer to read status  |
+|                     unsigned int ui_NoOfChannels    : No Of Channels To read       |
+|                     unsigned int *data              : Data Pointer to read status  |
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
 +----------------------------------------------------------------------------+
@@ -486,11 +488,11 @@ INT i_APCI1564_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-INT i_APCI1564_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1564_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_Temp;
-	UINT ui_NoOfChannel;
+	unsigned int ui_Temp;
+	unsigned int ui_NoOfChannel;
 
 	ui_NoOfChannel = CR_CHAN(insn->chanspec);
 	ui_Temp = data[0];
@@ -498,7 +500,7 @@ INT i_APCI1564_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subde
 		APCI1564_DIGITAL_OP_RW);
 	if (ui_Temp == 0) {
 		*data = (*data >> ui_NoOfChannel) & 0x1;
-	}			// if  (ui_Temp==0)
+	}			/*  if  (ui_Temp==0) */
 	else {
 		if (ui_Temp == 1) {
 			switch (ui_NoOfChannel) {
@@ -523,14 +525,14 @@ INT i_APCI1564_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subde
 
 			default:
 				comedi_error(dev, " chan spec wrong");
-				return -EINVAL;	// "sorry channel spec wrong "
+				return -EINVAL;	/*  "sorry channel spec wrong " */
 				break;
-			}	// switch(ui_NoOfChannels)
-		}		// if  (ui_Temp==1)
+			}	/*  switch(ui_NoOfChannels) */
+		}		/*  if  (ui_Temp==1) */
 		else {
 			printk("\nSpecified channel not supported \n");
-		}		// else if (ui_Temp==1)
-	}			// else if  (ui_Temp==0)
+		}		/*  else if (ui_Temp==1) */
+	}			/*  else if  (ui_Temp==0) */
 	return insn->n;
 }
 
@@ -543,7 +545,7 @@ INT i_APCI1564_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subde
 | Task              : Configures The Timer , Counter or Watchdog             |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev : Driver handle                     |
-|                     UINT *data         : Data Pointer contains             |
+|                     unsigned int *data         : Data Pointer contains             |
 |                                          configuration parameters as below |
 |                                                                            |
 |					  data[0]            : 0 Configure As Timer      |
@@ -564,34 +566,34 @@ INT i_APCI1564_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subde
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-INT i_APCI1564_ConfigTimerCounterWatchdog(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI1564_ConfigTimerCounterWatchdog(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	ULONG ul_Command1 = 0;
+	unsigned int ul_Command1 = 0;
 	devpriv->tsk_Current = current;
 	if (data[0] == ADDIDATA_WATCHDOG) {
 		devpriv->b_TimerSelectMode = ADDIDATA_WATCHDOG;
 
-		//Disable the watchdog
+		/* Disable the watchdog */
 		outl(0x0,
 			devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP_WATCHDOG +
 			APCI1564_TCW_PROG);
-		//Loading the Reload value
+		/* Loading the Reload value */
 		outl(data[3],
 			devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP_WATCHDOG +
 			APCI1564_TCW_RELOAD_VALUE);
-	}			// if  (data[0]==ADDIDATA_WATCHDOG)
+	}			/*  if  (data[0]==ADDIDATA_WATCHDOG) */
 	else if (data[0] == ADDIDATA_TIMER) {
-		//First Stop The Timer
+		/* First Stop The Timer */
 		ul_Command1 =
 			inl(devpriv->i_IobaseAmcc + APCI1564_TIMER +
 			APCI1564_TCW_PROG);
 		ul_Command1 = ul_Command1 & 0xFFFFF9FEUL;
-		outl(ul_Command1, devpriv->i_IobaseAmcc + APCI1564_TIMER + APCI1564_TCW_PROG);	//Stop The Timer
+		outl(ul_Command1, devpriv->i_IobaseAmcc + APCI1564_TIMER + APCI1564_TCW_PROG);	/* Stop The Timer */
 
 		devpriv->b_TimerSelectMode = ADDIDATA_TIMER;
 		if (data[1] == 1) {
-			outl(0x02, devpriv->i_IobaseAmcc + APCI1564_TIMER + APCI1564_TCW_PROG);	//Enable TIMER int & DISABLE ALL THE OTHER int SOURCES
+			outl(0x02, devpriv->i_IobaseAmcc + APCI1564_TIMER + APCI1564_TCW_PROG);	/* Enable TIMER int & DISABLE ALL THE OTHER int SOURCES */
 			outl(0x0,
 				devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP +
 				APCI1564_DIGITAL_IP_IRQ);
@@ -614,18 +616,18 @@ INT i_APCI1564_ConfigTimerCounterWatchdog(struct comedi_device * dev,
 			outl(0x0,
 				devpriv->iobase + APCI1564_COUNTER4 +
 				APCI1564_TCW_IRQ);
-		}		// if  (data[1]==1)
+		}		/*  if  (data[1]==1) */
 		else {
-			outl(0x0, devpriv->i_IobaseAmcc + APCI1564_TIMER + APCI1564_TCW_PROG);	//disable Timer interrupt
-		}		// else if  (data[1]==1)
+			outl(0x0, devpriv->i_IobaseAmcc + APCI1564_TIMER + APCI1564_TCW_PROG);	/* disable Timer interrupt */
+		}		/*  else if  (data[1]==1) */
 
-		// Loading Timebase
+		/*  Loading Timebase */
 
 		outl(data[2],
 			devpriv->i_IobaseAmcc + APCI1564_TIMER +
 			APCI1564_TCW_TIMEBASE);
 
-		//Loading the Reload value
+		/* Loading the Reload value */
 		outl(data[3],
 			devpriv->i_IobaseAmcc + APCI1564_TIMER +
 			APCI1564_TCW_RELOAD_VALUE);
@@ -635,18 +637,18 @@ INT i_APCI1564_ConfigTimerCounterWatchdog(struct comedi_device * dev,
 			APCI1564_TCW_PROG);
 		ul_Command1 =
 			(ul_Command1 & 0xFFF719E2UL) | 2UL << 13UL | 0x10UL;
-		outl(ul_Command1, devpriv->i_IobaseAmcc + APCI1564_TIMER + APCI1564_TCW_PROG);	//mode 2
-	}			// else if  (data[0]==ADDIDATA_TIMER)
+		outl(ul_Command1, devpriv->i_IobaseAmcc + APCI1564_TIMER + APCI1564_TCW_PROG);	/* mode 2 */
+	}			/*  else if  (data[0]==ADDIDATA_TIMER) */
 	else if (data[0] == ADDIDATA_COUNTER) {
 		devpriv->b_TimerSelectMode = ADDIDATA_COUNTER;
 		devpriv->b_ModeSelectRegister = data[5];
 
-		//First Stop The Counter
+		/* First Stop The Counter */
 		ul_Command1 =
 			inl(devpriv->iobase + ((data[5] - 1) * 0x20) +
 			APCI1564_TCW_PROG);
 		ul_Command1 = ul_Command1 & 0xFFFFF9FEUL;
-		outl(ul_Command1, devpriv->iobase + ((data[5] - 1) * 0x20) + APCI1564_TCW_PROG);	//Stop The Timer
+		outl(ul_Command1, devpriv->iobase + ((data[5] - 1) * 0x20) + APCI1564_TCW_PROG);	/* Stop The Timer */
 
       /************************/
 		/* Set the reload value */
@@ -666,12 +668,12 @@ INT i_APCI1564_ConfigTimerCounterWatchdog(struct comedi_device * dev,
       /******************************/
 		ul_Command1 =
 			(ul_Command1 & 0xFFFC19E2UL) | 0x80000UL |
-			(ULONG) ((ULONG) data[4] << 16UL);
+			(unsigned int) ((unsigned int) data[4] << 16UL);
 		outl(ul_Command1,
 			devpriv->iobase + ((data[5] - 1) * 0x20) +
 			APCI1564_TCW_PROG);
 
-		// Enable or Disable Interrupt
+		/*  Enable or Disable Interrupt */
 		ul_Command1 = (ul_Command1 & 0xFFFFF9FD) | (data[1] << 1);
 		outl(ul_Command1,
 			devpriv->iobase + ((data[5] - 1) * 0x20) +
@@ -684,10 +686,10 @@ INT i_APCI1564_ConfigTimerCounterWatchdog(struct comedi_device * dev,
 		outl(ul_Command1,
 			devpriv->iobase + ((data[5] - 1) * 0x20) +
 			APCI1564_TCW_PROG);
-	}			// else if  (data[0]==ADDIDATA_COUNTER)
+	}			/*  else if  (data[0]==ADDIDATA_COUNTER) */
 	else {
 		printk(" Invalid subdevice.");
-	}			// else if  (data[0]==ADDIDATA_WATCHDOG)
+	}			/*  else if  (data[0]==ADDIDATA_WATCHDOG) */
 
 	return insn->n;
 }
@@ -701,7 +703,7 @@ INT i_APCI1564_ConfigTimerCounterWatchdog(struct comedi_device * dev,
 | Task              : Start / Stop The Selected Timer , Counter or Watchdog  |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev : Driver handle                     |
-|                     UINT *data         : Data Pointer contains             |
+|                     unsigned int *data         : Data Pointer contains             |
 |                                          configuration parameters as below |
 |                                                                            |
 |					  data[0]            : 0 Timer                   |
@@ -718,22 +720,22 @@ INT i_APCI1564_ConfigTimerCounterWatchdog(struct comedi_device * dev,
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-INT i_APCI1564_StartStopWriteTimerCounterWatchdog(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI1564_StartStopWriteTimerCounterWatchdog(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	ULONG ul_Command1 = 0;
+	unsigned int ul_Command1 = 0;
 	if (devpriv->b_TimerSelectMode == ADDIDATA_WATCHDOG) {
 		switch (data[1]) {
-		case 0:	//stop the watchdog
-			outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP_WATCHDOG + APCI1564_TCW_PROG);	//disable the watchdog
+		case 0:	/* stop the watchdog */
+			outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP_WATCHDOG + APCI1564_TCW_PROG);	/* disable the watchdog */
 			break;
-		case 1:	//start the watchdog
+		case 1:	/* start the watchdog */
 			outl(0x0001,
 				devpriv->i_IobaseAmcc +
 				APCI1564_DIGITAL_OP_WATCHDOG +
 				APCI1564_TCW_PROG);
 			break;
-		case 2:	//Software trigger
+		case 2:	/* Software trigger */
 			outl(0x0201,
 				devpriv->i_IobaseAmcc +
 				APCI1564_DIGITAL_OP_WATCHDOG +
@@ -742,8 +744,8 @@ INT i_APCI1564_StartStopWriteTimerCounterWatchdog(struct comedi_device * dev,
 		default:
 			printk("\nSpecified functionality does not exist\n");
 			return -EINVAL;
-		}		// switch (data[1])
-	}			// if  (devpriv->b_TimerSelectMode==ADDIDATA_WATCHDOG)
+		}		/*  switch (data[1]) */
+	}			/*  if  (devpriv->b_TimerSelectMode==ADDIDATA_WATCHDOG) */
 	if (devpriv->b_TimerSelectMode == ADDIDATA_TIMER) {
 		if (data[1] == 1) {
 			ul_Command1 =
@@ -751,13 +753,13 @@ INT i_APCI1564_StartStopWriteTimerCounterWatchdog(struct comedi_device * dev,
 				APCI1564_TCW_PROG);
 			ul_Command1 = (ul_Command1 & 0xFFFFF9FFUL) | 0x1UL;
 
-			//Enable the Timer
+			/* Enable the Timer */
 			outl(ul_Command1,
 				devpriv->i_IobaseAmcc + APCI1564_TIMER +
 				APCI1564_TCW_PROG);
-		}		// if  (data[1]==1)
+		}		/*  if  (data[1]==1) */
 		else if (data[1] == 0) {
-			//Stop The Timer
+			/* Stop The Timer */
 
 			ul_Command1 =
 				inl(devpriv->i_IobaseAmcc + APCI1564_TIMER +
@@ -766,29 +768,29 @@ INT i_APCI1564_StartStopWriteTimerCounterWatchdog(struct comedi_device * dev,
 			outl(ul_Command1,
 				devpriv->i_IobaseAmcc + APCI1564_TIMER +
 				APCI1564_TCW_PROG);
-		}		// else if(data[1]==0)
-	}			// if  (devpriv->b_TimerSelectMode==ADDIDATA_TIMER)
+		}		/*  else if(data[1]==0) */
+	}			/*  if  (devpriv->b_TimerSelectMode==ADDIDATA_TIMER) */
 	if (devpriv->b_TimerSelectMode == ADDIDATA_COUNTER) {
 		ul_Command1 =
 			inl(devpriv->iobase + ((devpriv->b_ModeSelectRegister -
 					1) * 0x20) + APCI1564_TCW_PROG);
 		if (data[1] == 1) {
-			//Start the Counter subdevice
+			/* Start the Counter subdevice */
 			ul_Command1 = (ul_Command1 & 0xFFFFF9FFUL) | 0x1UL;
-		}		// if  (data[1] == 1)
+		}		/*  if  (data[1] == 1) */
 		else if (data[1] == 0) {
-			// Stops the Counter subdevice
+			/*  Stops the Counter subdevice */
 			ul_Command1 = 0;
 
-		}		// else if  (data[1] == 0)
+		}		/*  else if  (data[1] == 0) */
 		else if (data[1] == 2) {
-			// Clears the Counter subdevice
+			/*  Clears the Counter subdevice */
 			ul_Command1 = (ul_Command1 & 0xFFFFF9FFUL) | 0x400;
-		}		// else if  (data[1] == 3)
+		}		/*  else if  (data[1] == 3) */
 		outl(ul_Command1,
 			devpriv->iobase + ((devpriv->b_ModeSelectRegister -
 					1) * 0x20) + APCI1564_TCW_PROG);
-	}			// if (devpriv->b_TimerSelectMode==ADDIDATA_COUNTER)
+	}			/*  if (devpriv->b_TimerSelectMode==ADDIDATA_COUNTER) */
 	return insn->n;
 }
 
@@ -801,7 +803,7 @@ INT i_APCI1564_StartStopWriteTimerCounterWatchdog(struct comedi_device * dev,
 | Task              : Read The Selected Timer , Counter or Watchdog          |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev : Driver handle                     |
-|                     UINT *data         : Data Pointer contains             |
+|                     unsigned int *data         : Data Pointer contains             |
 |                                          configuration parameters as below |
 |                                                                            |
 
@@ -813,13 +815,13 @@ INT i_APCI1564_StartStopWriteTimerCounterWatchdog(struct comedi_device * dev,
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-INT i_APCI1564_ReadTimerCounterWatchdog(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI1564_ReadTimerCounterWatchdog(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	ULONG ul_Command1 = 0;
+	unsigned int ul_Command1 = 0;
 
 	if (devpriv->b_TimerSelectMode == ADDIDATA_WATCHDOG) {
-		// Stores the status of the Watchdog
+		/*  Stores the status of the Watchdog */
 		data[0] =
 			inl(devpriv->i_IobaseAmcc +
 			APCI1564_DIGITAL_OP_WATCHDOG +
@@ -827,18 +829,18 @@ INT i_APCI1564_ReadTimerCounterWatchdog(struct comedi_device * dev,
 		data[1] =
 			inl(devpriv->i_IobaseAmcc +
 			APCI1564_DIGITAL_OP_WATCHDOG);
-	}			// if  (devpriv->b_TimerSelectMode==ADDIDATA_WATCHDOG)
+	}			/*  if  (devpriv->b_TimerSelectMode==ADDIDATA_WATCHDOG) */
 	else if (devpriv->b_TimerSelectMode == ADDIDATA_TIMER) {
-		// Stores the status of the Timer
+		/*  Stores the status of the Timer */
 		data[0] =
 			inl(devpriv->i_IobaseAmcc + APCI1564_TIMER +
 			APCI1564_TCW_TRIG_STATUS) & 0x1;
 
-		// Stores the Actual value of the Timer
+		/*  Stores the Actual value of the Timer */
 		data[1] = inl(devpriv->i_IobaseAmcc + APCI1564_TIMER);
-	}			// else if  (devpriv->b_TimerSelectMode==ADDIDATA_TIMER)
+	}			/*  else if  (devpriv->b_TimerSelectMode==ADDIDATA_TIMER) */
 	else if (devpriv->b_TimerSelectMode == ADDIDATA_COUNTER) {
-		// Read the Counter Actual Value.
+		/*  Read the Counter Actual Value. */
 		data[0] =
 			inl(devpriv->iobase + ((devpriv->b_ModeSelectRegister -
 					1) * 0x20) +
@@ -850,28 +852,28 @@ INT i_APCI1564_ReadTimerCounterWatchdog(struct comedi_device * dev,
       /***********************************/
 		/* Get the software trigger status */
       /***********************************/
-		data[1] = (BYTE) ((ul_Command1 >> 1) & 1);
+		data[1] = (unsigned char) ((ul_Command1 >> 1) & 1);
 
       /***********************************/
 		/* Get the hardware trigger status */
       /***********************************/
-		data[2] = (BYTE) ((ul_Command1 >> 2) & 1);
+		data[2] = (unsigned char) ((ul_Command1 >> 2) & 1);
 
       /*********************************/
 		/* Get the software clear status */
       /*********************************/
-		data[3] = (BYTE) ((ul_Command1 >> 3) & 1);
+		data[3] = (unsigned char) ((ul_Command1 >> 3) & 1);
 
       /***************************/
 		/* Get the overflow status */
       /***************************/
-		data[4] = (BYTE) ((ul_Command1 >> 0) & 1);
-	}			// else  if  (devpriv->b_TimerSelectMode==ADDIDATA_COUNTER)
+		data[4] = (unsigned char) ((ul_Command1 >> 0) & 1);
+	}			/*  else  if  (devpriv->b_TimerSelectMode==ADDIDATA_COUNTER) */
 	else if ((devpriv->b_TimerSelectMode != ADDIDATA_TIMER)
 		&& (devpriv->b_TimerSelectMode != ADDIDATA_WATCHDOG)
 		&& (devpriv->b_TimerSelectMode != ADDIDATA_COUNTER)) {
 		printk("\n Invalid Subdevice !!!\n");
-	}			// else if ((devpriv->b_TimerSelectMode!=ADDIDATA_TIMER) && (devpriv->b_TimerSelectMode!=ADDIDATA_WATCHDOG)&& (devpriv->b_TimerSelectMode!=ADDIDATA_COUNTER))
+	}			/*  else if ((devpriv->b_TimerSelectMode!=ADDIDATA_TIMER) && (devpriv->b_TimerSelectMode!=ADDIDATA_WATCHDOG)&& (devpriv->b_TimerSelectMode!=ADDIDATA_COUNTER)) */
 	return insn->n;
 }
 
@@ -892,8 +894,8 @@ INT i_APCI1564_ReadTimerCounterWatchdog(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI1564_ReadInterruptStatus(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI1564_ReadInterruptStatus(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	*data = ui_Type;
 	return insn->n;
@@ -919,10 +921,10 @@ int i_APCI1564_ReadInterruptStatus(struct comedi_device * dev, struct comedi_sub
 static void v_APCI1564_Interrupt(int irq, void *d)
 {
 	struct comedi_device *dev = d;
-	UINT ui_DO, ui_DI;
-	UINT ui_Timer;
-	UINT ui_C1, ui_C2, ui_C3, ui_C4;
-	ULONG ul_Command2 = 0;
+	unsigned int ui_DO, ui_DI;
+	unsigned int ui_Timer;
+	unsigned int ui_C1, ui_C2, ui_C3, ui_C4;
+	unsigned int ul_Command2 = 0;
 	ui_DI = inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP +
 		APCI1564_DIGITAL_IP_IRQ) & 0x01;
 	ui_DO = inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP +
@@ -941,7 +943,7 @@ static void v_APCI1564_Interrupt(int irq, void *d)
 	if (ui_DI == 0 && ui_DO == 0 && ui_Timer == 0 && ui_C1 == 0
 		&& ui_C2 == 0 && ui_C3 == 0 && ui_C4 == 0) {
 		printk("\nInterrupt from unknown source\n");
-	}			// if(ui_DI==0 && ui_DO==0 && ui_Timer==0 && ui_C1==0 && ui_C2==0 && ui_C3==0 && ui_C4==0)
+	}			/*  if(ui_DI==0 && ui_DO==0 && ui_Timer==0 && ui_C1==0 && ui_C2==0 && ui_C3==0 && ui_C4==0) */
 
 	if (ui_DI == 1) {
 		ui_DI = inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP +
@@ -953,116 +955,137 @@ static void v_APCI1564_Interrupt(int irq, void *d)
 			inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP +
 			APCI1564_DIGITAL_IP_INTERRUPT_STATUS);
 		ui_InterruptStatus_1564 = ui_InterruptStatus_1564 & 0X000FFFF0;
-		send_sig(SIGIO, devpriv->tsk_Current, 0);	// send signal to the sample
-		outl(ui_DI, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP + APCI1564_DIGITAL_IP_IRQ);	//enable the interrupt
+		send_sig(SIGIO, devpriv->tsk_Current, 0);	/*  send signal to the sample */
+		outl(ui_DI, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP + APCI1564_DIGITAL_IP_IRQ);	/* enable the interrupt */
 		return;
 	}
 
 	if (ui_DO == 1) {
-		// Check for Digital Output interrupt Type - 1: Vcc interrupt 2: CC interrupt.
+		/*  Check for Digital Output interrupt Type - 1: Vcc interrupt 2: CC interrupt. */
 		ui_Type =
 			inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP +
 			APCI1564_DIGITAL_OP_INTERRUPT_STATUS) & 0x3;
-		//Disable the  Interrupt
+		/* Disable the  Interrupt */
 		outl(0x0,
 			devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP +
 			APCI1564_DIGITAL_OP_INTERRUPT);
 
-		//Sends signal to user space
+		/* Sends signal to user space */
 		send_sig(SIGIO, devpriv->tsk_Current, 0);
 
-	}			// if  (ui_DO)
+	}			/*  if  (ui_DO) */
 
-	if ((ui_Timer == 1) && (devpriv->b_TimerSelectMode = ADDIDATA_TIMER)) {
-		// Disable Timer Interrupt
-		ul_Command2 =
-			inl(devpriv->i_IobaseAmcc + APCI1564_TIMER +
-			APCI1564_TCW_PROG);
-		outl(0x0,
-			devpriv->i_IobaseAmcc + APCI1564_TIMER +
-			APCI1564_TCW_PROG);
+	if (ui_Timer == 1) {
+		devpriv->b_TimerSelectMode = ADDIDATA_TIMER;
+		if (devpriv->b_TimerSelectMode) {
 
-		//Send a signal to from kernel to user space
-		send_sig(SIGIO, devpriv->tsk_Current, 0);
+			/*  Disable Timer Interrupt */
+			ul_Command2 =
+				inl(devpriv->i_IobaseAmcc + APCI1564_TIMER +
+				    APCI1564_TCW_PROG);
+			outl(0x0,
+			     devpriv->i_IobaseAmcc + APCI1564_TIMER +
+			     APCI1564_TCW_PROG);
 
-		// Enable Timer Interrupt
+			/* Send a signal to from kernel to user space */
+			send_sig(SIGIO, devpriv->tsk_Current, 0);
 
-		outl(ul_Command2,
-			devpriv->i_IobaseAmcc + APCI1564_TIMER +
-			APCI1564_TCW_PROG);
-	}			// if  ((ui_Timer == 1) && (devpriv->b_TimerSelectMode =ADDIDATA_TIMER))
+			/*  Enable Timer Interrupt */
 
-	if ((ui_C1 == 1) && (devpriv->b_TimerSelectMode = ADDIDATA_COUNTER)) {
-		// Disable Counter Interrupt
-		ul_Command2 =
-			inl(devpriv->iobase + APCI1564_COUNTER1 +
-			APCI1564_TCW_PROG);
-		outl(0x0,
-			devpriv->iobase + APCI1564_COUNTER1 +
-			APCI1564_TCW_PROG);
+			outl(ul_Command2,
+			     devpriv->i_IobaseAmcc + APCI1564_TIMER +
+			     APCI1564_TCW_PROG);
+		}
+	}/* if  (ui_Timer == 1) */
 
-		//Send a signal to from kernel to user space
-		send_sig(SIGIO, devpriv->tsk_Current, 0);
 
-		// Enable Counter Interrupt
-		outl(ul_Command2,
-			devpriv->iobase + APCI1564_COUNTER1 +
-			APCI1564_TCW_PROG);
-	}			// if  ((ui_C1 == 1) && (devpriv->b_TimerSelectMode = ADDIDATA_COUNTER))
+	if (ui_C1 == 1) {
+		devpriv->b_TimerSelectMode = ADDIDATA_COUNTER;
+		if (devpriv->b_TimerSelectMode) {
 
-	if ((ui_C2 == 1) && (devpriv->b_TimerSelectMode = ADDIDATA_COUNTER)) {
-		// Disable Counter Interrupt
-		ul_Command2 =
-			inl(devpriv->iobase + APCI1564_COUNTER2 +
-			APCI1564_TCW_PROG);
-		outl(0x0,
-			devpriv->iobase + APCI1564_COUNTER2 +
-			APCI1564_TCW_PROG);
+			/*  Disable Counter Interrupt */
+			ul_Command2 =
+				inl(devpriv->iobase + APCI1564_COUNTER1 +
+				    APCI1564_TCW_PROG);
+			outl(0x0,
+			     devpriv->iobase + APCI1564_COUNTER1 +
+			     APCI1564_TCW_PROG);
 
-		//Send a signal to from kernel to user space
-		send_sig(SIGIO, devpriv->tsk_Current, 0);
+			/* Send a signal to from kernel to user space */
+			send_sig(SIGIO, devpriv->tsk_Current, 0);
 
-		// Enable Counter Interrupt
-		outl(ul_Command2,
-			devpriv->iobase + APCI1564_COUNTER2 +
-			APCI1564_TCW_PROG);
-	}			// if  ((ui_C2 == 1) && (devpriv->b_TimerSelectMode =ADDIDATA_COUNTER))
+			/*  Enable Counter Interrupt */
+			outl(ul_Command2,
+			     devpriv->iobase + APCI1564_COUNTER1 +
+			     APCI1564_TCW_PROG);
+		}
+	} /* if  (ui_C1 == 1) */
 
-	if ((ui_C3 == 1) && (devpriv->b_TimerSelectMode = ADDIDATA_COUNTER)) {
-		// Disable Counter Interrupt
-		ul_Command2 =
-			inl(devpriv->iobase + APCI1564_COUNTER3 +
-			APCI1564_TCW_PROG);
-		outl(0x0,
-			devpriv->iobase + APCI1564_COUNTER3 +
-			APCI1564_TCW_PROG);
+	if (ui_C2 == 1) {
+		devpriv->b_TimerSelectMode = ADDIDATA_COUNTER;
+		if (devpriv->b_TimerSelectMode) {
 
-		//Send a signal to from kernel to user space
-		send_sig(SIGIO, devpriv->tsk_Current, 0);
+			/*  Disable Counter Interrupt */
+			ul_Command2 =
+				inl(devpriv->iobase + APCI1564_COUNTER2 +
+				    APCI1564_TCW_PROG);
+			outl(0x0,
+			     devpriv->iobase + APCI1564_COUNTER2 +
+			     APCI1564_TCW_PROG);
 
-		// Enable Counter Interrupt
-		outl(ul_Command2,
-			devpriv->iobase + APCI1564_COUNTER3 +
-			APCI1564_TCW_PROG);
-	}			// if ((ui_C3 == 1) && (devpriv->b_TimerSelectMode =ADDIDATA_COUNTER))
+			/* Send a signal to from kernel to user space */
+			send_sig(SIGIO, devpriv->tsk_Current, 0);
 
-	if ((ui_C4 == 1) && (devpriv->b_TimerSelectMode = ADDIDATA_COUNTER)) {
-		// Disable Counter Interrupt
-		ul_Command2 =
-			inl(devpriv->iobase + APCI1564_COUNTER4 +
-			APCI1564_TCW_PROG);
-		outl(0x0,
-			devpriv->iobase + APCI1564_COUNTER4 +
-			APCI1564_TCW_PROG);
+			/*  Enable Counter Interrupt */
+			outl(ul_Command2,
+			     devpriv->iobase + APCI1564_COUNTER2 +
+			     APCI1564_TCW_PROG);
+		}
+	} /*  if  ((ui_C2 == 1) */
 
-		//Send a signal to from kernel to user space
-		send_sig(SIGIO, devpriv->tsk_Current, 0);
+	if (ui_C3 == 1) {
+		devpriv->b_TimerSelectMode = ADDIDATA_COUNTER;
+		if (devpriv->b_TimerSelectMode) {
 
-		// Enable Counter Interrupt
-		outl(ul_Command2,
-			devpriv->iobase + APCI1564_COUNTER4 +
-			APCI1564_TCW_PROG);
-	}			// if ((ui_C4 == 1) && (devpriv->b_TimerSelectMode =ADDIDATA_COUNTER))
+			/*  Disable Counter Interrupt */
+			ul_Command2 =
+				inl(devpriv->iobase + APCI1564_COUNTER3 +
+				    APCI1564_TCW_PROG);
+			outl(0x0,
+			     devpriv->iobase + APCI1564_COUNTER3 +
+			     APCI1564_TCW_PROG);
+
+			/* Send a signal to from kernel to user space */
+			send_sig(SIGIO, devpriv->tsk_Current, 0);
+
+			/*  Enable Counter Interrupt */
+			outl(ul_Command2,
+			     devpriv->iobase + APCI1564_COUNTER3 +
+			     APCI1564_TCW_PROG);
+		}
+	}	/*  if ((ui_C3 == 1) */
+
+	if (ui_C4 == 1) {
+		devpriv->b_TimerSelectMode = ADDIDATA_COUNTER;
+		if (devpriv->b_TimerSelectMode) {
+
+			/*  Disable Counter Interrupt */
+			ul_Command2 =
+				inl(devpriv->iobase + APCI1564_COUNTER4 +
+				    APCI1564_TCW_PROG);
+			outl(0x0,
+			     devpriv->iobase + APCI1564_COUNTER4 +
+			     APCI1564_TCW_PROG);
+
+			/* Send a signal to from kernel to user space */
+			send_sig(SIGIO, devpriv->tsk_Current, 0);
+
+			/*  Enable Counter Interrupt */
+			outl(ul_Command2,
+			     devpriv->iobase + APCI1564_COUNTER4 +
+			     APCI1564_TCW_PROG);
+		}
+	}	/*  if (ui_C4 == 1) */
 	return;
 }
 
@@ -1081,16 +1104,16 @@ static void v_APCI1564_Interrupt(int irq, void *d)
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI1564_Reset(struct comedi_device * dev)
+int i_APCI1564_Reset(struct comedi_device *dev)
 {
-	outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP_IRQ);	//disable the interrupts
-	inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP_INTERRUPT_STATUS);	//Reset the interrupt status register
-	outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP_INTERRUPT_MODE1);	//Disable the and/or interrupt
+	outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP_IRQ);	/* disable the interrupts */
+	inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP_INTERRUPT_STATUS);	/* Reset the interrupt status register */
+	outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP_INTERRUPT_MODE1);	/* Disable the and/or interrupt */
 	outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP_INTERRUPT_MODE2);
 	devpriv->b_DigitalOutputRegister = 0;
 	ui_Type = 0;
-	outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP);	//Resets the output channels
-	outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP_INTERRUPT);	//Disables the interrupt.
+	outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP);	/* Resets the output channels */
+	outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP_INTERRUPT);	/* Disables the interrupt. */
 	outl(0x0,
 		devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP_WATCHDOG +
 		APCI1564_TCW_RELOAD_VALUE);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.h
index f0c461ca539..0780c440c44 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.h
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.h
@@ -20,45 +20,45 @@
 #define APCI1564_BOARD_VENDOR_ID                0x15B8
 #define APCI1564_ADDRESS_RANGE                  128
 
-//DIGITAL INPUT-OUTPUT DEFINE
-// Input defines
+/* DIGITAL INPUT-OUTPUT DEFINE */
+/* Input defines */
 #define APCI1564_DIGITAL_IP                     0x04
 #define APCI1564_DIGITAL_IP_INTERRUPT_MODE1     4
 #define APCI1564_DIGITAL_IP_INTERRUPT_MODE2     8
 #define APCI1564_DIGITAL_IP_IRQ                 16
 
-// Output defines
+/* Output defines */
 #define APCI1564_DIGITAL_OP                 	0x18
 #define APCI1564_DIGITAL_OP_RW               	0
 #define APCI1564_DIGITAL_OP_INTERRUPT           4
 #define APCI1564_DIGITAL_OP_IRQ                 12
 
-//Digital Input IRQ Function Selection
+/* Digital Input IRQ Function Selection */
 #define ADDIDATA_OR                             0
 #define ADDIDATA_AND                            1
 
-//Digital Input Interrupt Status
+/* Digital Input Interrupt Status */
 #define APCI1564_DIGITAL_IP_INTERRUPT_STATUS    12
 
-//Digital Output Interrupt Status
+/* Digital Output Interrupt Status */
 #define APCI1564_DIGITAL_OP_INTERRUPT_STATUS    8
 
-//Digital Input Interrupt Enable Disable.
+/* Digital Input Interrupt Enable Disable. */
 #define APCI1564_DIGITAL_IP_INTERRUPT_ENABLE    0x4
 #define APCI1564_DIGITAL_IP_INTERRUPT_DISABLE   0xFFFFFFFB
 
-//Digital Output Interrupt Enable Disable.
+/* Digital Output Interrupt Enable Disable. */
 #define APCI1564_DIGITAL_OP_VCC_INTERRUPT_ENABLE   0x1
 #define APCI1564_DIGITAL_OP_VCC_INTERRUPT_DISABLE  0xFFFFFFFE
 #define APCI1564_DIGITAL_OP_CC_INTERRUPT_ENABLE    0x2
 #define APCI1564_DIGITAL_OP_CC_INTERRUPT_DISABLE   0xFFFFFFFD
 
-//ADDIDATA Enable Disable
+/* ADDIDATA Enable Disable */
 
 #define ADDIDATA_ENABLE                            1
 #define ADDIDATA_DISABLE                           0
 
-// TIMER COUNTER WATCHDOG DEFINES
+/* TIMER COUNTER WATCHDOG DEFINES */
 
 #define ADDIDATA_TIMER                             0
 #define ADDIDATA_COUNTER                           1
@@ -78,30 +78,32 @@
 #define APCI1564_TCW_WARN_TIMEVAL                  24
 #define APCI1564_TCW_WARN_TIMEBASE                 28
 
-// Hardware Layer  functions for Apci1564
+/* Hardware Layer  functions for Apci1564 */
 
-//DI
-// for di read
-INT i_APCI1564_ConfigDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
+/*
+* DI for di read
+*/
+int i_APCI1564_ConfigDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
 				  struct comedi_insn *insn, unsigned int *data);
-INT i_APCI1564_Read1DigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI1564_Read1DigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
 				 struct comedi_insn *insn, unsigned int *data);
-INT i_APCI1564_ReadMoreDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI1564_ReadMoreDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
 				    struct comedi_insn *insn, unsigned int *data);
 
-//DO
+/* DO */
 int i_APCI1564_ConfigDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
 				   struct comedi_insn *insn, unsigned int *data);
-INT i_APCI1564_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI1564_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
 				  struct comedi_insn *insn, unsigned int *data);
-INT i_APCI1564_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI1564_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
 				 struct comedi_insn *insn, unsigned int *data);
 int i_APCI1564_ReadInterruptStatus(struct comedi_device *dev, struct comedi_subdevice *s,
 				   struct comedi_insn *insn, unsigned int *data);
 
-// TIMER
-// timer value is passed as u seconds
-INT i_APCI1564_ConfigTimerCounterWatchdog(struct comedi_device *dev,
+/*
+* TIMER timer value is passed as u seconds
+*/
+int i_APCI1564_ConfigTimerCounterWatchdog(struct comedi_device *dev,
 					  struct comedi_subdevice *s,
 					  struct comedi_insn *insn, unsigned int *data);
 int i_APCI1564_StartStopWriteTimerCounterWatchdog(struct comedi_device *dev,
@@ -112,8 +114,8 @@ int i_APCI1564_ReadTimerCounterWatchdog(struct comedi_device *dev,
 					struct comedi_subdevice *s,
 					struct comedi_insn *insn, unsigned int *data);
 
-// INTERRUPT
+/* intERRUPT */
 static void v_APCI1564_Interrupt(int irq, void *d);
 
-// RESET
-INT i_APCI1564_Reset(struct comedi_device *dev);
+/* RESET */
+int i_APCI1564_Reset(struct comedi_device *dev);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci16xx.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci16xx.c
index 906d635da6b..988e3fc2b85 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci16xx.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci16xx.c
@@ -3,13 +3,13 @@
 
 Copyright (C) 2004,2005  ADDI-DATA GmbH for the source code of this module.
 
-        ADDI-DATA GmbH
-        Dieselstrasse 3
-        D-77833 Ottersweier
-        Tel: +19(0)7223/9493-0
-        Fax: +49(0)7223/9493-92
-        http://www.addi-data-com
-        info@addi-data.com
+	ADDI-DATA GmbH
+	Dieselstrasse 3
+	D-77833 Ottersweier
+	Tel: +19(0)7223/9493-0
+	Fax: +49(0)7223/9493-92
+	http://www.addi-data-com
+	info@addi-data.com
 
 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
 
@@ -57,7 +57,7 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 
 /*
 +----------------------------------------------------------------------------+
-| Function Name     : INT   i_APCI16XX_InsnConfigInitTTLIO                   |
+| Function Name     : int   i_APCI16XX_InsnConfigInitTTLIO                   |
 |                          (struct comedi_device    *dev,                           |
 |                           struct comedi_subdevice *s,                             |
 |                           struct comedi_insn      *insn,                          |
@@ -69,11 +69,11 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 |                for you call any other function witch access of TTL.        |
 |                APCI16XX_TTL_INITDIRECTION(user inputs for direction)       |
 +----------------------------------------------------------------------------+
-| Input Parameters  : b_InitType    = (BYTE) data[0];                        |
-|                     b_Port0Mode   = (BYTE) data[1];                        |
-|                     b_Port1Mode   = (BYTE) data[2];                        |
-|                     b_Port2Mode   = (BYTE) data[3];                        |
-|                     b_Port3Mode   = (BYTE) data[4];                        |
+| Input Parameters  : b_InitType    = (unsigned char) data[0];                        |
+|                     b_Port0Mode   = (unsigned char) data[1];                        |
+|                     b_Port1Mode   = (unsigned char) data[2];                        |
+|                     b_Port2Mode   = (unsigned char) data[3];                        |
+|                     b_Port3Mode   = (unsigned char) data[4];                        |
 |                     ........                                               |
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
@@ -90,14 +90,14 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI16XX_InsnConfigInitTTLIO(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI16XX_InsnConfigInitTTLIO(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = insn->n;
-	BYTE b_Command = 0;
-	BYTE b_Cpt = 0;
-	BYTE b_NumberOfPort =
-		(BYTE) (devpriv->ps_BoardInfo->i_NbrTTLChannel / 8);
+	int i_ReturnValue = insn->n;
+	unsigned char b_Command = 0;
+	unsigned char b_Cpt = 0;
+	unsigned char b_NumberOfPort =
+		(unsigned char) (devpriv->ps_BoardInfo->i_NbrTTLChannel / 8);
 
 	/************************/
 	/* Test the buffer size */
@@ -108,7 +108,7 @@ int i_APCI16XX_InsnConfigInitTTLIO(struct comedi_device * dev,
 		/* Get the command */
 		/* **************** */
 
-		b_Command = (BYTE) data[0];
+		b_Command = (unsigned char) data[0];
 
 	   /********************/
 		/* Test the command */
@@ -122,7 +122,7 @@ int i_APCI16XX_InsnConfigInitTTLIO(struct comedi_device * dev,
 	      /***************************************/
 
 			if ((b_Command == APCI16XX_TTL_INITDIRECTION)
-				&& ((BYTE) (insn->n - 1) != b_NumberOfPort)) {
+				&& ((unsigned char) (insn->n - 1) != b_NumberOfPort)) {
 		 /*******************/
 				/* Data size error */
 		 /*******************/
@@ -132,7 +132,7 @@ int i_APCI16XX_InsnConfigInitTTLIO(struct comedi_device * dev,
 			}
 
 			if ((b_Command == APCI16XX_TTL_OUTPUTMEMORY)
-				&& ((BYTE) (insn->n) != 2)) {
+				&& ((unsigned char) (insn->n) != 2)) {
 		 /*******************/
 				/* Data size error */
 		 /*******************/
@@ -182,8 +182,8 @@ int i_APCI16XX_InsnConfigInitTTLIO(struct comedi_device * dev,
 		 /************************/
 
 				printk("\nPort %d direction selection error",
-					(INT) b_Cpt);
-				i_ReturnValue = -(INT) b_Cpt;
+					(int) b_Cpt);
+				i_ReturnValue = -(int) b_Cpt;
 			}
 
 	      /**************************/
@@ -239,7 +239,7 @@ int i_APCI16XX_InsnConfigInitTTLIO(struct comedi_device * dev,
 		}
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
@@ -250,7 +250,7 @@ int i_APCI16XX_InsnConfigInitTTLIO(struct comedi_device * dev,
 
 /*
 +----------------------------------------------------------------------------+
-| Function Name     : INT     i_APCI16XX_InsnBitsReadTTLIO                   |
+| Function Name     : int     i_APCI16XX_InsnBitsReadTTLIO                   |
 |                          (struct comedi_device    *dev,                           |
 |                           struct comedi_subdevice *s,                             |
 |                           struct comedi_insn      *insn,                          |
@@ -266,11 +266,11 @@ int i_APCI16XX_InsnConfigInitTTLIO(struct comedi_device * dev,
 |              APCI16XX_TTL_READCHANNEL                                      |
 |                    b_SelectedPort= CR_RANGE(insn->chanspec);               |
 |                    b_InputChannel= CR_CHAN(insn->chanspec);                |
-|                    b_ReadType	  = (BYTE) data[0];                          |
+|                    b_ReadType	  = (unsigned char) data[0];                          |
 |                                                                            |
 |              APCI16XX_TTL_READPORT                                         |
 |                    b_SelectedPort= CR_RANGE(insn->chanspec);               |
-|                    b_ReadType	  = (BYTE) data[0];                          |
+|                    b_ReadType	  = (unsigned char) data[0];                          |
 +----------------------------------------------------------------------------+
 | Output Parameters : data[0]    0 : Channle is not active                   |
 |                                1 : Channle is active                       |
@@ -283,17 +283,17 @@ int i_APCI16XX_InsnConfigInitTTLIO(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI16XX_InsnBitsReadTTLIO(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI16XX_InsnBitsReadTTLIO(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = insn->n;
-	BYTE b_Command = 0;
-	BYTE b_NumberOfPort =
-		(BYTE) (devpriv->ps_BoardInfo->i_NbrTTLChannel / 8);
-	BYTE b_SelectedPort = CR_RANGE(insn->chanspec);
-	BYTE b_InputChannel = CR_CHAN(insn->chanspec);
-	BYTE *pb_Status;
-	DWORD dw_Status;
+	int i_ReturnValue = insn->n;
+	unsigned char b_Command = 0;
+	unsigned char b_NumberOfPort =
+		(unsigned char) (devpriv->ps_BoardInfo->i_NbrTTLChannel / 8);
+	unsigned char b_SelectedPort = CR_RANGE(insn->chanspec);
+	unsigned char b_InputChannel = CR_CHAN(insn->chanspec);
+	unsigned char *pb_Status;
+	unsigned int dw_Status;
 
 	/************************/
 	/* Test the buffer size */
@@ -304,7 +304,7 @@ int i_APCI16XX_InsnBitsReadTTLIO(struct comedi_device * dev,
 		/* Get the command */
 		/* **************** */
 
-		b_Command = (BYTE) data[0];
+		b_Command = (unsigned char) data[0];
 
 	   /********************/
 		/* Test the command */
@@ -380,7 +380,7 @@ int i_APCI16XX_InsnBitsReadTTLIO(struct comedi_device * dev,
 	/**************************/
 
 	if (i_ReturnValue >= 0) {
-		pb_Status = (PBYTE) & data[0];
+		pb_Status = (unsigned char *) &data[0];
 
 	   /*******************************/
 		/* Get the digital inpu status */
@@ -394,7 +394,7 @@ int i_APCI16XX_InsnBitsReadTTLIO(struct comedi_device * dev,
 		/* Save the port value */
 	   /***********************/
 
-		*pb_Status = (BYTE) dw_Status;
+		*pb_Status = (unsigned char) dw_Status;
 
 	   /***************************************/
 		/* Test if read channel status command */
@@ -405,12 +405,12 @@ int i_APCI16XX_InsnBitsReadTTLIO(struct comedi_device * dev,
 		}
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
-| Function Name     : INT i_APCI16XX_InsnReadTTLIOAllPortValue               |
+| Function Name     : int i_APCI16XX_InsnReadTTLIOAllPortValue               |
 |                          (struct comedi_device    *dev,                           |
 |                           struct comedi_subdevice *s,                             |
 |                           struct comedi_insn      *insn,                          |
@@ -430,13 +430,13 @@ int i_APCI16XX_InsnBitsReadTTLIO(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI16XX_InsnReadTTLIOAllPortValue(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI16XX_InsnReadTTLIOAllPortValue(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	BYTE b_Command = (BYTE) CR_AREF(insn->chanspec);
-	INT i_ReturnValue = insn->n;
-	BYTE b_Cpt = 0;
-	BYTE b_NumberOfPort = 0;
+	unsigned char b_Command = (unsigned char) CR_AREF(insn->chanspec);
+	int i_ReturnValue = insn->n;
+	unsigned char b_Cpt = 0;
+	unsigned char b_NumberOfPort = 0;
 	unsigned int *pls_ReadData = data;
 
 	/********************/
@@ -450,7 +450,7 @@ int i_APCI16XX_InsnReadTTLIOAllPortValue(struct comedi_device * dev,
 	   /**********************************/
 
 		b_NumberOfPort =
-			(BYTE) (devpriv->ps_BoardInfo->i_NbrTTLChannel / 32);
+			(unsigned char) (devpriv->ps_BoardInfo->i_NbrTTLChannel / 32);
 		if ((b_NumberOfPort * 32) <
 			devpriv->ps_BoardInfo->i_NbrTTLChannel) {
 			b_NumberOfPort = b_NumberOfPort + 1;
@@ -524,7 +524,7 @@ int i_APCI16XX_InsnReadTTLIOAllPortValue(struct comedi_device * dev,
 		i_ReturnValue = -100;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
@@ -535,7 +535,7 @@ int i_APCI16XX_InsnReadTTLIOAllPortValue(struct comedi_device * dev,
 
 /*
 +----------------------------------------------------------------------------+
-| Function Name     : INT     i_APCI16XX_InsnBitsWriteTTLIO                  |
+| Function Name     : int     i_APCI16XX_InsnBitsWriteTTLIO                  |
 |                          (struct comedi_device    *dev,                           |
 |                           struct comedi_subdevice *s,                             |
 |                           struct comedi_insn      *insn,                          |
@@ -551,11 +551,11 @@ int i_APCI16XX_InsnReadTTLIOAllPortValue(struct comedi_device * dev,
 |              APCI16XX_TTL_WRITECHANNEL_ON | APCI16XX_TTL_WRITECHANNEL_OFF  |
 |                    b_SelectedPort = CR_RANGE(insn->chanspec);              |
 |                    b_OutputChannel= CR_CHAN(insn->chanspec);               |
-|                    b_Command      = (BYTE) data[0];                        |
+|                    b_Command      = (unsigned char) data[0];                        |
 |                                                                            |
 |              APCI16XX_TTL_WRITEPORT_ON | APCI16XX_TTL_WRITEPORT_OFF        |
 |                    b_SelectedPort = CR_RANGE(insn->chanspec);              |
-|                    b_Command      = (BYTE) data[0];                        |
+|                    b_Command      = (unsigned char) data[0];                        |
 +----------------------------------------------------------------------------+
 | Output Parameters : data[0] : TTL output port 0 to 3 data                  |
 |                     data[1] : TTL output port 4 to 7 data                  |
@@ -570,16 +570,16 @@ int i_APCI16XX_InsnReadTTLIOAllPortValue(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI16XX_InsnBitsWriteTTLIO(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI16XX_InsnBitsWriteTTLIO(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = insn->n;
-	BYTE b_Command = 0;
-	BYTE b_NumberOfPort =
-		(BYTE) (devpriv->ps_BoardInfo->i_NbrTTLChannel / 8);
-	BYTE b_SelectedPort = CR_RANGE(insn->chanspec);
-	BYTE b_OutputChannel = CR_CHAN(insn->chanspec);
-	DWORD dw_Status = 0;
+	int i_ReturnValue = insn->n;
+	unsigned char b_Command = 0;
+	unsigned char b_NumberOfPort =
+		(unsigned char) (devpriv->ps_BoardInfo->i_NbrTTLChannel / 8);
+	unsigned char b_SelectedPort = CR_RANGE(insn->chanspec);
+	unsigned char b_OutputChannel = CR_CHAN(insn->chanspec);
+	unsigned int dw_Status = 0;
 
 	/************************/
 	/* Test the buffer size */
@@ -590,7 +590,7 @@ int i_APCI16XX_InsnBitsWriteTTLIO(struct comedi_device * dev,
 		/* Get the command */
 		/* **************** */
 
-		b_Command = (BYTE) data[0];
+		b_Command = (unsigned char) data[0];
 
 	   /********************/
 		/* Test the command */
@@ -758,7 +758,7 @@ int i_APCI16XX_InsnBitsWriteTTLIO(struct comedi_device * dev,
 			devpriv->iobase + 20 + ((b_SelectedPort / 4) * 4));
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
@@ -774,7 +774,7 @@ int i_APCI16XX_InsnBitsWriteTTLIO(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI16XX_Reset(struct comedi_device * dev)
+int i_APCI16XX_Reset(struct comedi_device *dev)
 {
 	return 0;
 }
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.c
index 31f55da39ea..457917f292b 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.c
@@ -3,13 +3,13 @@
 
 Copyright (C) 2004,2005  ADDI-DATA GmbH for the source code of this module.
 
-        ADDI-DATA GmbH
-        Dieselstrasse 3
-        D-77833 Ottersweier
-        Tel: +19(0)7223/9493-0
-        Fax: +49(0)7223/9493-92
-        http://www.addi-data-com
-        info@addi-data.com
+	ADDI-DATA GmbH
+	Dieselstrasse 3
+	D-77833 Ottersweier
+	Tel: +19(0)7223/9493-0
+	Fax: +49(0)7223/9493-92
+	http://www.addi-data-com
+	info@addi-data.com
 
 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
 
@@ -62,7 +62,7 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 | Task              : Configures The Digital Output Subdevice.               |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev : Driver handle                     |
-|                     UINT *data         : Data Pointer contains             |
+|                     unsigned int *data         : Data Pointer contains             |
 |                                          configuration parameters as below |
 |                                                                            |
 |			  data[0]            : 1 Digital Memory On               |
@@ -75,20 +75,20 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-int i_APCI2016_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI2016_ConfigDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if ((data[0] != 0) && (data[0] != 1)) {
 		comedi_error(dev,
 			"Not a valid Data !!! ,Data should be 1 or 0\n");
 		return -EINVAL;
-	}			// if  ((data[0]!=0) && (data[0]!=1))
+	}			/*  if  ((data[0]!=0) && (data[0]!=1)) */
 	if (data[0]) {
 		devpriv->b_OutputMemoryStatus = ADDIDATA_ENABLE;
-	}			// if  (data[0]
+	}			/*  if  (data[0] */
 	else {
 		devpriv->b_OutputMemoryStatus = ADDIDATA_DISABLE;
-	}			// else if  (data[0]
+	}			/*  else if  (data[0] */
 	return insn->n;
 }
 
@@ -101,8 +101,8 @@ int i_APCI2016_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_sub
 | Task              : Writes port value  To the selected port                |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev      : Driver handle                |
-|                     UINT ui_NoOfChannels    : No Of Channels To Write      |
-|                     UINT *data              : Data Pointer to read status  |
+|                     unsigned int ui_NoOfChannels    : No Of Channels To Write      |
+|                     unsigned int *data              : Data Pointer to read status  |
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
 +----------------------------------------------------------------------------+
@@ -111,34 +111,34 @@ int i_APCI2016_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_sub
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-int i_APCI2016_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI2016_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_NoOfChannel;
-	UINT ui_Temp, ui_Temp1;
+	unsigned int ui_NoOfChannel;
+	unsigned int ui_Temp, ui_Temp1;
 	ui_NoOfChannel = CR_CHAN(insn->chanspec);
 	if ((ui_NoOfChannel < 0) || (ui_NoOfChannel > 15)) {
 		comedi_error(dev,
 			"Invalid Channel Numbers !!!, Channel Numbers must be between 0 and 15\n");
 		return -EINVAL;
-	}			// if  ((ui_NoOfChannel<0) || (ui_NoOfChannel>15))
+	}			/*  if  ((ui_NoOfChannel<0) || (ui_NoOfChannel>15)) */
 	if (devpriv->b_OutputMemoryStatus) {
 		ui_Temp = inw(devpriv->iobase + APCI2016_DIGITAL_OP);
-	}			// if  (devpriv->b_OutputMemoryStatus )
+	}			/*  if  (devpriv->b_OutputMemoryStatus ) */
 	else {
 		ui_Temp = 0;
-	}			// else if  (devpriv->b_OutputMemoryStatus )
+	}			/*  else if  (devpriv->b_OutputMemoryStatus ) */
 	if ((data[1] != 0) && (data[1] != 1)) {
 		comedi_error(dev,
 			"Invalid Data[1] value !!!, Data[1] should be 0 or 1\n");
 		return -EINVAL;
-	}			// if  ((data[1]!=0) && (data[1]!=1))
+	}			/*  if  ((data[1]!=0) && (data[1]!=1)) */
 
 	if (data[3] == 0) {
 		if (data[1] == 0) {
 			data[0] = (data[0] << ui_NoOfChannel) | ui_Temp;
 			outw(data[0], devpriv->iobase + APCI2016_DIGITAL_OP);
-		}		// if (data[1]==0)
+		}		/*  if (data[1]==0) */
 		else {
 			if (data[1] == 1) {
 				switch (ui_NoOfChannel) {
@@ -162,16 +162,16 @@ int i_APCI2016_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 					break;
 				default:
 					comedi_error(dev, " chan spec wrong");
-					return -EINVAL;	// "sorry channel spec wrong "
-				}	//switch(ui_NoOfChannels)
+					return -EINVAL;	/*  "sorry channel spec wrong " */
+				}	/* switch(ui_NoOfChannels) */
 				outw(data[0],
 					devpriv->iobase + APCI2016_DIGITAL_OP);
-			}	// if  (data[1]==1)
+			}	/*  if  (data[1]==1) */
 			else {
 				printk("\nSpecified channel not supported\n");
-			}	// else if  (data[1]==1)
-		}		// else if (data[1]==0)
-	}			// if (data[3]==0)
+			}	/*  else if  (data[1]==1) */
+		}		/*  else if (data[1]==0) */
+	}			/*  if (data[3]==0) */
 	else {
 		if (data[3] == 1) {
 			if (data[1] == 0) {
@@ -183,7 +183,7 @@ int i_APCI2016_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 				data[0] = data[0] & ui_Temp;
 				outw(data[0],
 					devpriv->iobase + APCI2016_DIGITAL_OP);
-			}	// if  (data[1]==0)
+			}	/*  if  (data[1]==0) */
 			else {
 				if (data[1] == 1) {
 					switch (ui_NoOfChannel) {
@@ -228,22 +228,22 @@ int i_APCI2016_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 					default:
 						comedi_error(dev,
 							" chan spec wrong");
-						return -EINVAL;	// "sorry channel spec wrong "
-					}	//switch(ui_NoOfChannels)
+						return -EINVAL;	/*  "sorry channel spec wrong " */
+					}	/* switch(ui_NoOfChannels) */
 					outw(data[0],
 						devpriv->iobase +
 						APCI2016_DIGITAL_OP);
-				}	// if(data[1]==1)
+				}	/*  if(data[1]==1) */
 				else {
 					printk("\nSpecified channel not supported\n");
-				}	//else if(data[1]==1)
-			}	//elseif(data[1]==0)
-		}		//if(data[3]==1);
+				}	/* else if(data[1]==1) */
+			}	/* elseif(data[1]==0) */
+		}		/* if(data[3]==1); */
 		else {
 			printk("\nSpecified functionality does not exist\n");
 			return -EINVAL;
-		}		//if else data[3]==1)
-	}			//if else data[3]==0)
+		}		/* if else data[3]==1) */
+	}			/* if else data[3]==0) */
 	return insn->n;
 }
 
@@ -256,8 +256,8 @@ int i_APCI2016_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 | Task              : Read  value  of the selected channel or port           |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev      : Driver handle                |
-|                     UINT ui_NoOfChannels    : No Of Channels To read       |
-|                     UINT *data              : Data Pointer to read status  |
+|                     unsigned int ui_NoOfChannels    : No Of Channels To read       |
+|                     unsigned int *data              : Data Pointer to read status  |
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
 +----------------------------------------------------------------------------+
@@ -266,27 +266,27 @@ int i_APCI2016_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-int i_APCI2016_BitsDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI2016_BitsDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_Temp;
-	UINT ui_NoOfChannel;
+	unsigned int ui_Temp;
+	unsigned int ui_NoOfChannel;
 	ui_NoOfChannel = CR_CHAN(insn->chanspec);
 	if ((ui_NoOfChannel < 0) || (ui_NoOfChannel > 15)) {
 		comedi_error(dev,
 			"Invalid Channel Numbers !!!, Channel Numbers must be between 0 and 15\n");
 		return -EINVAL;
-	}			// if  ((ui_NoOfChannel<0) || (ui_NoOfChannel>15))
+	}			/*  if  ((ui_NoOfChannel<0) || (ui_NoOfChannel>15)) */
 	if ((data[0] != 0) && (data[0] != 1)) {
 		comedi_error(dev,
 			"Invalid Data[0] value !!!, Data[0] should be 0 or 1\n");
 		return -EINVAL;
-	}			// if  ((data[0]!=0) && (data[0]!=1))
+	}			/*  if  ((data[0]!=0) && (data[0]!=1)) */
 	ui_Temp = data[0];
 	*data = inw(devpriv->iobase + APCI2016_DIGITAL_OP_RW);
 	if (ui_Temp == 0) {
 		*data = (*data >> ui_NoOfChannel) & 0x1;
-	}			// if  (ui_Temp==0)
+	}			/*  if  (ui_Temp==0) */
 	else {
 		if (ui_Temp == 1) {
 			switch (ui_NoOfChannel) {
@@ -307,13 +307,13 @@ int i_APCI2016_BitsDigitalOutput(struct comedi_device * dev, struct comedi_subde
 
 			default:
 				comedi_error(dev, " chan spec wrong");
-				return -EINVAL;	// "sorry channel spec wrong "
-			}	//switch(ui_NoOfChannel)
-		}		// if  (ui_Temp==1)
+				return -EINVAL;	/*  "sorry channel spec wrong " */
+			}	/* switch(ui_NoOfChannel) */
+		}		/*  if  (ui_Temp==1) */
 		else {
 			printk("\nSpecified channel not supported \n");
-		}		// else if  (ui_Temp==1)
-	}			// if  (ui_Temp==0)
+		}		/*  else if  (ui_Temp==1) */
+	}			/*  if  (ui_Temp==0) */
 	return insn->n;
 }
 
@@ -337,16 +337,16 @@ int i_APCI2016_BitsDigitalOutput(struct comedi_device * dev, struct comedi_subde
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-int i_APCI2016_ConfigWatchdog(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI2016_ConfigWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 
 	if (data[0] == 0) {
-		//Disable the watchdog
+		/* Disable the watchdog */
 		outw(0x0,
 			devpriv->i_IobaseAddon +
 			APCI2016_WATCHDOG_ENABLEDISABLE);
-		//Loading the Reload value
+		/* Loading the Reload value */
 		outw(data[1],
 			devpriv->i_IobaseAddon +
 			APCI2016_WATCHDOG_RELOAD_VALUE);
@@ -380,20 +380,20 @@ int i_APCI2016_ConfigWatchdog(struct comedi_device * dev, struct comedi_subdevic
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-int i_APCI2016_StartStopWriteWatchdog(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI2016_StartStopWriteWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 
 	switch (data[0]) {
-	case 0:		//stop the watchdog
-		outw(0x0, devpriv->i_IobaseAddon + APCI2016_WATCHDOG_ENABLEDISABLE);	//disable the watchdog
+	case 0:		/* stop the watchdog */
+		outw(0x0, devpriv->i_IobaseAddon + APCI2016_WATCHDOG_ENABLEDISABLE);	/* disable the watchdog */
 		break;
-	case 1:		//start the watchdog
+	case 1:		/* start the watchdog */
 		outw(0x0001,
 			devpriv->i_IobaseAddon +
 			APCI2016_WATCHDOG_ENABLEDISABLE);
 		break;
-	case 2:		//Software trigger
+	case 2:		/* Software trigger */
 		outw(0x0201,
 			devpriv->i_IobaseAddon +
 			APCI2016_WATCHDOG_ENABLEDISABLE);
@@ -401,7 +401,7 @@ int i_APCI2016_StartStopWriteWatchdog(struct comedi_device * dev, struct comedi_
 	default:
 		printk("\nSpecified functionality does not exist\n");
 		return -EINVAL;
-	}			// switch(data[0])
+	}			/*  switch(data[0]) */
 
 	return insn->n;
 }
@@ -427,8 +427,8 @@ int i_APCI2016_StartStopWriteWatchdog(struct comedi_device * dev, struct comedi_
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI2016_ReadWatchdog(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI2016_ReadWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	udelay(5);
 	data[0] = inw(devpriv->i_IobaseAddon + APCI2016_WATCHDOG_STATUS) & 0x1;
@@ -450,9 +450,9 @@ int i_APCI2016_ReadWatchdog(struct comedi_device * dev, struct comedi_subdevice
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI2016_Reset(struct comedi_device * dev)
+int i_APCI2016_Reset(struct comedi_device *dev)
 {
-	outw(0x0, devpriv->iobase + APCI2016_DIGITAL_OP);	// Resets the digital output channels
+	outw(0x0, devpriv->iobase + APCI2016_DIGITAL_OP);	/*  Resets the digital output channels */
 	outw(0x0, devpriv->i_IobaseAddon + APCI2016_WATCHDOG_ENABLEDISABLE);
 	outw(0x0, devpriv->i_IobaseAddon + APCI2016_WATCHDOG_RELOAD_VALUE);
 	outw(0x0, devpriv->i_IobaseAddon + APCI2016_WATCHDOG_RELOAD_VALUE + 2);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.h
index 9261aacd25f..639944c4446 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.h
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.h
@@ -19,17 +19,17 @@
 #define APCI2016_BOARD_VENDOR_ID 0x15B8
 #define APCI2016_ADDRESS_RANGE   8
 
-//DIGITAL INPUT-OUTPUT DEFINE
+/* DIGITAL INPUT-OUTPUT DEFINE */
 
 #define APCI2016_DIGITAL_OP                 	0x04
 #define APCI2016_DIGITAL_OP_RW                 	4
 
-//ADDIDATA Enable Disable
+/* ADDIDATA Enable Disable */
 
 #define ADDIDATA_ENABLE                            1
 #define ADDIDATA_DISABLE                           0
 
-// TIMER COUNTER WATCHDOG DEFINES
+/* TIMER COUNTER WATCHDOG DEFINES */
 
 #define ADDIDATA_WATCHDOG                          2
 #define APCI2016_DIGITAL_OP_WATCHDOG               0
@@ -37,9 +37,9 @@
 #define APCI2016_WATCHDOG_RELOAD_VALUE             4
 #define APCI2016_WATCHDOG_STATUS                   16
 
-// Hardware Layer  functions for Apci2016
+/* Hardware Layer  functions for Apci2016 */
 
-//DO
+/* DO */
 int i_APCI2016_ConfigDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
 				   struct comedi_insn *insn, unsigned int *data);
 
@@ -49,8 +49,10 @@ int i_APCI2016_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subde
 int i_APCI2016_BitsDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
 				 struct comedi_insn *insn, unsigned int *data);
 
-// TIMER
-// timer value is passed as u seconds
+/*
+* TIMER
+* timer value is passed as u seconds
+*/
 
 int i_APCI2016_ConfigWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
 			      struct comedi_insn *insn, unsigned int *data);
@@ -61,10 +63,10 @@ int i_APCI2016_StartStopWriteWatchdog(struct comedi_device *dev, struct comedi_s
 int i_APCI2016_ReadWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
 			    struct comedi_insn *insn, unsigned int *data);
 
-// Interrupt functions.....
+/* Interrupt functions..... */
 
-// void v_APCI2016_Interrupt(int irq, void *d) ;
+/* void v_APCI2016_Interrupt(int irq, void *d); */
 
- //void v_APCI2016_Interrupt(int irq, void *d);
-// RESET
-INT i_APCI2016_Reset(struct comedi_device *dev);
+/* void v_APCI2016_Interrupt(int irq, void *d); */
+/* RESET */
+int i_APCI2016_Reset(struct comedi_device *dev);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c
index 1347bc388f3..ec817082d17 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c
@@ -3,13 +3,13 @@
 
 Copyright (C) 2004,2005  ADDI-DATA GmbH for the source code of this module.
 
-        ADDI-DATA GmbH
-        Dieselstrasse 3
-        D-77833 Ottersweier
-        Tel: +19(0)7223/9493-0
-        Fax: +49(0)7223/9493-92
-        http://www.addi-data-com
-        info@addi-data.com
+	ADDI-DATA GmbH
+	Dieselstrasse 3
+	D-77833 Ottersweier
+	Tel: +19(0)7223/9493-0
+	Fax: +49(0)7223/9493-92
+	http://www.addi-data-com
+	info@addi-data.com
 
 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
 
@@ -53,7 +53,7 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 */
 
 #include "hwdrv_apci2032.h"
-UINT ui_InterruptData, ui_Type;
+unsigned int ui_InterruptData, ui_Type;
 /*
 +----------------------------------------------------------------------------+
 | Function   Name   : int i_APCI2032_ConfigDigitalOutput                     |
@@ -63,7 +63,7 @@ UINT ui_InterruptData, ui_Type;
 | Task              : Configures The Digital Output Subdevice.               |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev : Driver handle                     |
-|                     UINT *data         : Data Pointer contains             |
+|                     unsigned int *data         : Data Pointer contains             |
 |                                          configuration parameters as below |
 |                                                                            |
 |					  data[1]            : 1 Enable  VCC  Interrupt  |
@@ -79,36 +79,36 @@ UINT ui_InterruptData, ui_Type;
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-int i_APCI2032_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI2032_ConfigDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	ULONG ul_Command = 0;
+	unsigned int ul_Command = 0;
 	devpriv->tsk_Current = current;
 
 	if ((data[0] != 0) && (data[0] != 1)) {
 		comedi_error(dev,
 			"Not a valid Data !!! ,Data should be 1 or 0\n");
 		return -EINVAL;
-	}			//if  ( (data[0]!=0) && (data[0]!=1) )
+	}			/* if  ( (data[0]!=0) && (data[0]!=1) ) */
 	if (data[0]) {
 		devpriv->b_OutputMemoryStatus = ADDIDATA_ENABLE;
-	}			// if  (data[0])
+	}			/*  if  (data[0]) */
 	else {
 		devpriv->b_OutputMemoryStatus = ADDIDATA_DISABLE;
-	}			//else if  (data[0])
+	}			/* else if  (data[0]) */
 
 	if (data[1] == ADDIDATA_ENABLE) {
 		ul_Command = ul_Command | 0x1;
-	}			//if  (data[1] == ADDIDATA_ENABLE)
+	}			/* if  (data[1] == ADDIDATA_ENABLE) */
 	else {
 		ul_Command = ul_Command & 0xFFFFFFFE;
-	}			//elseif  (data[1] == ADDIDATA_ENABLE)
+	}			/* elseif  (data[1] == ADDIDATA_ENABLE) */
 	if (data[2] == ADDIDATA_ENABLE) {
 		ul_Command = ul_Command | 0x2;
-	}			//if  (data[2] == ADDIDATA_ENABLE)
+	}			/* if  (data[2] == ADDIDATA_ENABLE) */
 	else {
 		ul_Command = ul_Command & 0xFFFFFFFD;
-	}			//elseif  (data[2] == ADDIDATA_ENABLE)
+	}			/* elseif  (data[2] == ADDIDATA_ENABLE) */
 	outl(ul_Command, devpriv->iobase + APCI2032_DIGITAL_OP_INTERRUPT);
 	ui_InterruptData = inl(devpriv->iobase + APCI2032_DIGITAL_OP_INTERRUPT);
 	return insn->n;
@@ -123,8 +123,8 @@ int i_APCI2032_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_sub
 | Task              : Writes port value  To the selected port                |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev      : Driver handle                |
-|                     UINT ui_NoOfChannels    : No Of Channels To Write      |
-|                     UINT *data              : Data Pointer to read status  |
+|                     unsigned int ui_NoOfChannels    : No Of Channels To Write      |
+|                     unsigned int *data              : Data Pointer to read status  |
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
 +----------------------------------------------------------------------------+
@@ -134,23 +134,23 @@ int i_APCI2032_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_sub
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI2032_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI2032_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_Temp, ui_Temp1;
-	UINT ui_NoOfChannel = CR_CHAN(insn->chanspec);	// get the channel
+	unsigned int ui_Temp, ui_Temp1;
+	unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec);	/*  get the channel */
 	if (devpriv->b_OutputMemoryStatus) {
 		ui_Temp = inl(devpriv->iobase + APCI2032_DIGITAL_OP);
 
-	}			//if(devpriv->b_OutputMemoryStatus )
+	}			/* if(devpriv->b_OutputMemoryStatus ) */
 	else {
 		ui_Temp = 0;
-	}			//if(devpriv->b_OutputMemoryStatus )
+	}			/* if(devpriv->b_OutputMemoryStatus ) */
 	if (data[3] == 0) {
 		if (data[1] == 0) {
 			data[0] = (data[0] << ui_NoOfChannel) | ui_Temp;
 			outl(data[0], devpriv->iobase + APCI2032_DIGITAL_OP);
-		}		//if(data[1]==0)
+		}		/* if(data[1]==0) */
 		else {
 			if (data[1] == 1) {
 				switch (ui_NoOfChannel) {
@@ -184,18 +184,18 @@ INT i_APCI2032_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 
 				default:
 					comedi_error(dev, " chan spec wrong");
-					return -EINVAL;	// "sorry channel spec wrong "
+					return -EINVAL;	/*  "sorry channel spec wrong " */
 
-				}	//switch(ui_NoOfChannels)
+				}	/* switch(ui_NoOfChannels) */
 
 				outl(data[0],
 					devpriv->iobase + APCI2032_DIGITAL_OP);
-			}	// if(data[1]==1)
+			}	/*  if(data[1]==1) */
 			else {
 				printk("\nSpecified channel not supported\n");
-			}	//else if(data[1]==1)
-		}		//elseif(data[1]==0)
-	}			//if(data[3]==0)
+			}	/* else if(data[1]==1) */
+		}		/* elseif(data[1]==0) */
+	}			/* if(data[3]==0) */
 	else {
 		if (data[3] == 1) {
 			if (data[1] == 0) {
@@ -209,7 +209,7 @@ INT i_APCI2032_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 				data[0] = data[0] & ui_Temp;
 				outl(data[0],
 					devpriv->iobase + APCI2032_DIGITAL_OP);
-			}	//if(data[1]==0)
+			}	/* if(data[1]==0) */
 			else {
 				if (data[1] == 1) {
 					switch (ui_NoOfChannel) {
@@ -272,25 +272,25 @@ INT i_APCI2032_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 					default:
 						comedi_error(dev,
 							" chan spec wrong");
-						return -EINVAL;	// "sorry channel spec wrong "
+						return -EINVAL;	/*  "sorry channel spec wrong " */
 
-					}	//switch(ui_NoOfChannels)
+					}	/* switch(ui_NoOfChannels) */
 
 					outl(data[0],
 						devpriv->iobase +
 						APCI2032_DIGITAL_OP);
-				}	// if(data[1]==1)
+				}	/*  if(data[1]==1) */
 				else {
 					printk("\nSpecified channel not supported\n");
-				}	//else if(data[1]==1)
-			}	//elseif(data[1]==0)
-		}		//if(data[3]==1);
+				}	/* else if(data[1]==1) */
+			}	/* elseif(data[1]==0) */
+		}		/* if(data[3]==1); */
 		else {
 			printk("\nSpecified functionality does not exist\n");
 			return -EINVAL;
-		}		//if else data[3]==1)
-	}			//if else data[3]==0)
-	return (insn->n);;
+		}		/* if else data[3]==1) */
+	}			/* if else data[3]==0) */
+	return insn->n;
 }
 
 /*
@@ -302,8 +302,8 @@ INT i_APCI2032_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 | Task              : Read  value  of the selected channel or port           |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev      : Driver handle                |
-|                     UINT ui_NoOfChannels    : No Of Channels To read       |
-|                     UINT *data              : Data Pointer to read status  |
+|                     unsigned int ui_NoOfChannels    : No Of Channels To read       |
+|                     unsigned int *data              : Data Pointer to read status  |
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
 +----------------------------------------------------------------------------+
@@ -313,17 +313,17 @@ INT i_APCI2032_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI2032_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI2032_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_Temp;
-	UINT ui_NoOfChannel;
+	unsigned int ui_Temp;
+	unsigned int ui_NoOfChannel;
 	ui_NoOfChannel = CR_CHAN(insn->chanspec);
 	ui_Temp = data[0];
 	*data = inl(devpriv->iobase + APCI2032_DIGITAL_OP_RW);
 	if (ui_Temp == 0) {
 		*data = (*data >> ui_NoOfChannel) & 0x1;
-	}			//if  (ui_Temp==0)
+	}			/* if  (ui_Temp==0) */
 	else {
 		if (ui_Temp == 1) {
 			switch (ui_NoOfChannel) {
@@ -349,28 +349,28 @@ INT i_APCI2032_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subde
 
 			default:
 				comedi_error(dev, " chan spec wrong");
-				return -EINVAL;	// "sorry channel spec wrong "
+				return -EINVAL;	/*  "sorry channel spec wrong " */
 
-			}	//switch(ui_NoOfChannels)
-		}		//if  (ui_Temp==1)
+			}	/* switch(ui_NoOfChannels) */
+		}		/* if  (ui_Temp==1) */
 		else {
 			printk("\nSpecified channel not supported \n");
-		}		//elseif  (ui_Temp==1)
+		}		/* elseif  (ui_Temp==1) */
 	}
 	return insn->n;
 }
 
 /*
 +----------------------------------------------------------------------------+
-| Function   Name   : INT i_APCI2032_ConfigWatchdog(comedi_device
-                   *dev,struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data)|
+| Function   Name   : int i_APCI2032_ConfigWatchdog(comedi_device
+|                   *dev,struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data)|
 |				                                                     |
 +----------------------------------------------------------------------------+
 | Task              : Configures The Watchdog                                |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev      : Driver handle                |
 |                     struct comedi_subdevice *s,   :pointer to subdevice structure
-                      struct comedi_insn *insn      :pointer to insn structure      |
+|                      struct comedi_insn *insn      :pointer to insn structure      |
 |                     unsigned int *data          : Data Pointer to read status                                                                                                             |
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
@@ -380,15 +380,15 @@ INT i_APCI2032_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subde
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-INT i_APCI2032_ConfigWatchdog(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI2032_ConfigWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (data[0] == 0) {
-		//Disable the watchdog
+		/* Disable the watchdog */
 		outl(0x0,
 			devpriv->iobase + APCI2032_DIGITAL_OP_WATCHDOG +
 			APCI2032_TCW_PROG);
-		//Loading the Reload value
+		/* Loading the Reload value */
 		outl(data[1],
 			devpriv->iobase + APCI2032_DIGITAL_OP_WATCHDOG +
 			APCI2032_TCW_RELOAD_VALUE);
@@ -421,19 +421,19 @@ INT i_APCI2032_ConfigWatchdog(struct comedi_device * dev, struct comedi_subdevic
     +----------------------------------------------------------------------------+
   */
 
-int i_APCI2032_StartStopWriteWatchdog(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI2032_StartStopWriteWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	switch (data[0]) {
-	case 0:		//stop the watchdog
-		outl(0x0, devpriv->iobase + APCI2032_DIGITAL_OP_WATCHDOG + APCI2032_TCW_PROG);	//disable the watchdog
+	case 0:		/* stop the watchdog */
+		outl(0x0, devpriv->iobase + APCI2032_DIGITAL_OP_WATCHDOG + APCI2032_TCW_PROG);	/* disable the watchdog */
 		break;
-	case 1:		//start the watchdog
+	case 1:		/* start the watchdog */
 		outl(0x0001,
 			devpriv->iobase + APCI2032_DIGITAL_OP_WATCHDOG +
 			APCI2032_TCW_PROG);
 		break;
-	case 2:		//Software trigger
+	case 2:		/* Software trigger */
 		outl(0x0201,
 			devpriv->iobase + APCI2032_DIGITAL_OP_WATCHDOG +
 			APCI2032_TCW_PROG);
@@ -449,13 +449,13 @@ int i_APCI2032_StartStopWriteWatchdog(struct comedi_device * dev, struct comedi_
 +----------------------------------------------------------------------------+
 | Function   Name   : int i_APCI2032_ReadWatchdog                            |
 |			(struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,
-                    unsigned int *data); 	                                     |
+|                    unsigned int *data); 	                                     |
 +----------------------------------------------------------------------------+
 | Task              : Read The Watchdog                                      |
 +----------------------------------------------------------------------------+
 | Input Parameters  :   struct comedi_device *dev      : Driver handle              |
 |                     struct comedi_subdevice *s,   :pointer to subdevice structure
-                      struct comedi_insn *insn      :pointer to insn structure      |
+|                      struct comedi_insn *insn      :pointer to insn structure      |
 |                     unsigned int *data          : Data Pointer to read status  |
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
@@ -466,8 +466,8 @@ int i_APCI2032_StartStopWriteWatchdog(struct comedi_device * dev, struct comedi_
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI2032_ReadWatchdog(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI2032_ReadWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 
 	data[0] =
@@ -498,13 +498,13 @@ void v_APCI2032_Interrupt(int irq, void *d)
 	struct comedi_device *dev = d;
 	unsigned int ui_DO;
 
-	ui_DO = inl(devpriv->iobase + APCI2032_DIGITAL_OP_IRQ) & 0x1;	//Check if VCC OR CC interrupt has occured.
+	ui_DO = inl(devpriv->iobase + APCI2032_DIGITAL_OP_IRQ) & 0x1;	/* Check if VCC OR CC interrupt has occured. */
 
 	if (ui_DO == 0) {
 		printk("\nInterrupt from unKnown source\n");
-	}			// if(ui_DO==0)
+	}			/*  if(ui_DO==0) */
 	if (ui_DO) {
-		// Check for Digital Output interrupt Type - 1: Vcc interrupt 2: CC interrupt.
+		/*  Check for Digital Output interrupt Type - 1: Vcc interrupt 2: CC interrupt. */
 		ui_Type =
 			inl(devpriv->iobase +
 			APCI2032_DIGITAL_OP_INTERRUPT_STATUS) & 0x3;
@@ -512,16 +512,16 @@ void v_APCI2032_Interrupt(int irq, void *d)
 			devpriv->iobase + APCI2032_DIGITAL_OP +
 			APCI2032_DIGITAL_OP_INTERRUPT);
 		if (ui_Type == 1) {
-			//Sends signal to user space
+			/* Sends signal to user space */
 			send_sig(SIGIO, devpriv->tsk_Current, 0);
-		}		// if (ui_Type==1)
+		}		/*  if (ui_Type==1) */
 		else {
 			if (ui_Type == 2) {
-				// Sends signal to user space
+				/*  Sends signal to user space */
 				send_sig(SIGIO, devpriv->tsk_Current, 0);
-			}	//if (ui_Type==2)
-		}		//else if (ui_Type==1)
-	}			//if(ui_DO)
+			}	/* if (ui_Type==2) */
+		}		/* else if (ui_Type==1) */
+	}			/* if(ui_DO) */
 
 	return;
 
@@ -544,8 +544,8 @@ void v_APCI2032_Interrupt(int irq, void *d)
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI2032_ReadInterruptStatus(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI2032_ReadInterruptStatus(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	*data = ui_Type;
 	return insn->n;
@@ -567,13 +567,13 @@ int i_APCI2032_ReadInterruptStatus(struct comedi_device * dev, struct comedi_sub
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI2032_Reset(struct comedi_device * dev)
+int i_APCI2032_Reset(struct comedi_device *dev)
 {
 	devpriv->b_DigitalOutputRegister = 0;
 	ui_Type = 0;
-	outl(0x0, devpriv->iobase + APCI2032_DIGITAL_OP);	//Resets the output channels
-	outl(0x0, devpriv->iobase + APCI2032_DIGITAL_OP_INTERRUPT);	//Disables the interrupt.
-	outl(0x0, devpriv->iobase + APCI2032_DIGITAL_OP_WATCHDOG + APCI2032_TCW_PROG);	//disable the watchdog
-	outl(0x0, devpriv->iobase + APCI2032_DIGITAL_OP_WATCHDOG + APCI2032_TCW_RELOAD_VALUE);	//reload=0
+	outl(0x0, devpriv->iobase + APCI2032_DIGITAL_OP);	/* Resets the output channels */
+	outl(0x0, devpriv->iobase + APCI2032_DIGITAL_OP_INTERRUPT);	/* Disables the interrupt. */
+	outl(0x0, devpriv->iobase + APCI2032_DIGITAL_OP_WATCHDOG + APCI2032_TCW_PROG);	/* disable the watchdog */
+	outl(0x0, devpriv->iobase + APCI2032_DIGITAL_OP_WATCHDOG + APCI2032_TCW_RELOAD_VALUE);	/* reload=0 */
 	return 0;
 }
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.h
index 55002e0288b..c971d143c24 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.h
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.h
@@ -17,32 +17,32 @@
 
 /*********      Definitions for APCI-2032 card  *****/
 
-// Card Specific information
+/* Card Specific information */
 #define APCI2032_BOARD_VENDOR_ID                 0x15B8
 #define APCI2032_ADDRESS_RANGE                   63
 
-//DIGITAL INPUT-OUTPUT DEFINE
+/* DIGITAL INPUT-OUTPUT DEFINE */
 
 #define APCI2032_DIGITAL_OP                 	0
 #define APCI2032_DIGITAL_OP_RW                 	0
 #define APCI2032_DIGITAL_OP_INTERRUPT           4
 #define APCI2032_DIGITAL_OP_IRQ                 12
 
-//Digital Output Interrupt Status
+/* Digital Output Interrupt Status */
 #define APCI2032_DIGITAL_OP_INTERRUPT_STATUS    8
 
-//Digital Output Interrupt Enable Disable.
+/* Digital Output Interrupt Enable Disable. */
 #define APCI2032_DIGITAL_OP_VCC_INTERRUPT_ENABLE   0x1
 #define APCI2032_DIGITAL_OP_VCC_INTERRUPT_DISABLE  0xFFFFFFFE
 #define APCI2032_DIGITAL_OP_CC_INTERRUPT_ENABLE    0x2
 #define APCI2032_DIGITAL_OP_CC_INTERRUPT_DISABLE   0xFFFFFFFD
 
-//ADDIDATA Enable Disable
+/* ADDIDATA Enable Disable */
 
 #define ADDIDATA_ENABLE                            1
 #define ADDIDATA_DISABLE                           0
 
-// TIMER COUNTER WATCHDOG DEFINES
+/* TIMER COUNTER WATCHDOG DEFINES */
 
 #define ADDIDATA_WATCHDOG                          2
 #define APCI2032_DIGITAL_OP_WATCHDOG               16
@@ -52,30 +52,32 @@
 #define APCI2032_TCW_TRIG_STATUS                   16
 #define APCI2032_TCW_IRQ                           20
 
-// Hardware Layer  functions for Apci2032
+/* Hardware Layer  functions for Apci2032 */
 
-//DO
+/* DO */
 int i_APCI2032_ConfigDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
 				   struct comedi_insn *insn, unsigned int *data);
-INT i_APCI2032_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI2032_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
 				  struct comedi_insn *insn, unsigned int *data);
-INT i_APCI2032_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI2032_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
 				 struct comedi_insn *insn, unsigned int *data);
 int i_APCI2032_ReadInterruptStatus(struct comedi_device *dev, struct comedi_subdevice *s,
 				   struct comedi_insn *insn, unsigned int *data);
 
-// TIMER
-// timer value is passed as u seconds
-INT i_APCI2032_ConfigWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
+/* TIMER
+ * timer value is passed as u seconds
+*/
+
+int i_APCI2032_ConfigWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
 			      struct comedi_insn *insn, unsigned int *data);
 int i_APCI2032_StartStopWriteWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
 				      struct comedi_insn *insn, unsigned int *data);
 int i_APCI2032_ReadWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
 			    struct comedi_insn *insn, unsigned int *data);
 
-// Interrupt functions.....
+/* Interrupt functions..... */
 
 void v_APCI2032_Interrupt(int irq, void *d);
 
-//Reset functions
+/* Reset functions */
 int i_APCI2032_Reset(struct comedi_device *dev);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.c
index 947e18ef3ab..a853c62a4fd 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.c
@@ -3,13 +3,13 @@
 
 Copyright (C) 2004,2005  ADDI-DATA GmbH for the source code of this module.
 
-        ADDI-DATA GmbH
-        Dieselstrasse 3
-        D-77833 Ottersweier
-        Tel: +19(0)7223/9493-0
-        Fax: +49(0)7223/9493-92
-        http://www.addi-data-com
-        info@addi-data.com
+	ADDI-DATA GmbH
+	Dieselstrasse 3
+	D-77833 Ottersweier
+	Tel: +19(0)7223/9493-0
+	Fax: +49(0)7223/9493-92
+	http://www.addi-data-com
+	info@addi-data.com
 
 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
 
@@ -63,7 +63,7 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev      : Driver handle                |
 |		       struct comedi_subdevice *s,   :pointer to subdevice structure
-                       struct comedi_insn *insn      :pointer to insn structure     |
+|                       struct comedi_insn *insn      :pointer to insn structure     |
 |                     unsigned int *data          : Data Pointer to read status  |
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
@@ -73,20 +73,20 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-INT i_APCI2200_Read1DigitalInput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI2200_Read1DigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_TmpValue = 0;
-	UINT ui_Channel;
+	unsigned int ui_TmpValue = 0;
+	unsigned int ui_Channel;
 	ui_Channel = CR_CHAN(insn->chanspec);
 	if (ui_Channel >= 0 && ui_Channel <= 7) {
-		ui_TmpValue = (UINT) inw(devpriv->iobase + APCI2200_DIGITAL_IP);
+		ui_TmpValue = (unsigned int) inw(devpriv->iobase + APCI2200_DIGITAL_IP);
 		*data = (ui_TmpValue >> ui_Channel) & 0x1;
-	}			//if(ui_Channel >= 0 && ui_Channel <=7)
+	}			/* if(ui_Channel >= 0 && ui_Channel <=7) */
 	else {
 		printk("\nThe specified channel does not exist\n");
-		return -EINVAL;	// "sorry channel spec wrong "
-	}			//else if(ui_Channel >= 0 && ui_Channel <=7)
+		return -EINVAL;	/*  "sorry channel spec wrong " */
+	}			/* else if(ui_Channel >= 0 && ui_Channel <=7) */
 
 	return insn->n;
 }
@@ -101,7 +101,7 @@ INT i_APCI2200_Read1DigitalInput(struct comedi_device * dev, struct comedi_subde
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev      : Driver handle                |
 |                      struct comedi_subdevice *s,   :pointer to subdevice structure
-                       struct comedi_insn *insn      :pointer to insn structure     |
+|                       struct comedi_insn *insn      :pointer to insn structure     |
 |                      unsigned int *data         : Data Pointer to read status  |
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
@@ -112,17 +112,17 @@ INT i_APCI2200_Read1DigitalInput(struct comedi_device * dev, struct comedi_subde
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI2200_ReadMoreDigitalInput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI2200_ReadMoreDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 
-	UINT ui_PortValue = data[0];
-	UINT ui_Mask = 0;
-	UINT ui_NoOfChannels;
+	unsigned int ui_PortValue = data[0];
+	unsigned int ui_Mask = 0;
+	unsigned int ui_NoOfChannels;
 
 	ui_NoOfChannels = CR_CHAN(insn->chanspec);
 
-	*data = (UINT) inw(devpriv->iobase + APCI2200_DIGITAL_IP);
+	*data = (unsigned int) inw(devpriv->iobase + APCI2200_DIGITAL_IP);
 	switch (ui_NoOfChannels) {
 	case 2:
 		ui_Mask = 3;
@@ -137,9 +137,9 @@ INT i_APCI2200_ReadMoreDigitalInput(struct comedi_device * dev, struct comedi_su
 
 	default:
 		printk("\nWrong parameters\n");
-		return -EINVAL;	// "sorry channel spec wrong "
+		return -EINVAL;	/*  "sorry channel spec wrong " */
 		break;
-	}			//switch(ui_NoOfChannels)
+	}			/* switch(ui_NoOfChannels) */
 
 	return insn->n;
 }
@@ -147,7 +147,7 @@ INT i_APCI2200_ReadMoreDigitalInput(struct comedi_device * dev, struct comedi_su
 /*
 +----------------------------------------------------------------------------+
 | Function   Name   : int i_APCI2200_ConfigDigitalOutput (struct comedi_device *dev,
-                    struct comedi_subdevice *s struct comedi_insn *insn,unsigned int *data)    |
+|                    struct comedi_subdevice *s struct comedi_insn *insn,unsigned int *data)    |
 |				                                                     |
 +----------------------------------------------------------------------------+
 | Task              : Configures The Digital Output Subdevice.               |
@@ -156,7 +156,7 @@ INT i_APCI2200_ReadMoreDigitalInput(struct comedi_device * dev, struct comedi_su
 |                     unsigned int *data         : Data Pointer contains         |
 |                                          configuration parameters as below |
 |                      struct comedi_subdevice *s,   :pointer to subdevice structure
-                       struct comedi_insn *insn      :pointer to insn structure                                                           |
+|                       struct comedi_insn *insn      :pointer to insn structure                                                           |
 |					  data[0]  :1:Memory on                          |
 |					            0:Memory off                         |
 |										                             |
@@ -169,8 +169,8 @@ INT i_APCI2200_ReadMoreDigitalInput(struct comedi_device * dev, struct comedi_su
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-int i_APCI2200_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI2200_ConfigDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	devpriv->b_OutputMemoryStatus = data[0];
 	return insn->n;
@@ -180,13 +180,13 @@ int i_APCI2200_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_sub
 +----------------------------------------------------------------------------+
 | Function   Name   : int i_APCI2200_WriteDigitalOutput                      |
 |			(struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,
-                     unsigned int *data)                                         |
+|                     unsigned int *data)                                         |
 +----------------------------------------------------------------------------+
 | Task              : Writes port value  To the selected port                |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev      : Driver handle                |
 |                     struct comedi_subdevice *s,   :pointer to subdevice structure
-                      struct comedi_insn *insn      :pointer to insn structure      |
+|                      struct comedi_insn *insn      :pointer to insn structure      |
 |                    unsigned int *data           : Data Pointer to read status  |
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
@@ -197,23 +197,23 @@ int i_APCI2200_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_sub
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI2200_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI2200_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_Temp, ui_Temp1;
-	UINT ui_NoOfChannel = CR_CHAN(insn->chanspec);	// get the channel
+	unsigned int ui_Temp, ui_Temp1;
+	unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec);	/*  get the channel */
 	if (devpriv->b_OutputMemoryStatus) {
 		ui_Temp = inw(devpriv->iobase + APCI2200_DIGITAL_OP);
 
-	}			//if(devpriv->b_OutputMemoryStatus )
+	}			/* if(devpriv->b_OutputMemoryStatus ) */
 	else {
 		ui_Temp = 0;
-	}			//if(devpriv->b_OutputMemoryStatus )
+	}			/* if(devpriv->b_OutputMemoryStatus ) */
 	if (data[3] == 0) {
 		if (data[1] == 0) {
 			data[0] = (data[0] << ui_NoOfChannel) | ui_Temp;
 			outw(data[0], devpriv->iobase + APCI2200_DIGITAL_OP);
-		}		//if(data[1]==0)
+		}		/* if(data[1]==0) */
 		else {
 			if (data[1] == 1) {
 				switch (ui_NoOfChannel) {
@@ -240,18 +240,18 @@ INT i_APCI2200_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 					break;
 				default:
 					comedi_error(dev, " chan spec wrong");
-					return -EINVAL;	// "sorry channel spec wrong "
+					return -EINVAL;	/*  "sorry channel spec wrong " */
 
-				}	//switch(ui_NoOfChannels)
+				}	/* switch(ui_NoOfChannels) */
 
 				outw(data[0],
 					devpriv->iobase + APCI2200_DIGITAL_OP);
-			}	// if(data[1]==1)
+			}	/*  if(data[1]==1) */
 			else {
 				printk("\nSpecified channel not supported\n");
-			}	//else if(data[1]==1)
-		}		//elseif(data[1]==0)
-	}			//if(data[3]==0)
+			}	/* else if(data[1]==1) */
+		}		/* elseif(data[1]==0) */
+	}			/* if(data[3]==0) */
 	else {
 		if (data[3] == 1) {
 			if (data[1] == 0) {
@@ -263,7 +263,7 @@ INT i_APCI2200_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 				data[0] = data[0] & ui_Temp;
 				outw(data[0],
 					devpriv->iobase + APCI2200_DIGITAL_OP);
-			}	//if(data[1]==0)
+			}	/* if(data[1]==0) */
 			else {
 				if (data[1] == 1) {
 					switch (ui_NoOfChannel) {
@@ -312,38 +312,38 @@ INT i_APCI2200_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 					default:
 						comedi_error(dev,
 							" chan spec wrong");
-						return -EINVAL;	// "sorry channel spec wrong "
+						return -EINVAL;	/*  "sorry channel spec wrong " */
 
-					}	//switch(ui_NoOfChannels)
+					}	/* switch(ui_NoOfChannels) */
 
 					outw(data[0],
 						devpriv->iobase +
 						APCI2200_DIGITAL_OP);
-				}	// if(data[1]==1)
+				}	/*  if(data[1]==1) */
 				else {
 					printk("\nSpecified channel not supported\n");
-				}	//else if(data[1]==1)
-			}	//elseif(data[1]==0)
-		}		//if(data[3]==1);
+				}	/* else if(data[1]==1) */
+			}	/* elseif(data[1]==0) */
+		}		/* if(data[3]==1); */
 		else {
 			printk("\nSpecified functionality does not exist\n");
 			return -EINVAL;
-		}		//if else data[3]==1)
-	}			//if else data[3]==0)
-	return (insn->n);;
+		}		/* if else data[3]==1) */
+	}			/* if else data[3]==0) */
+	return insn->n;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function   Name   : int i_APCI2200_ReadDigitalOutput                       |
 |			(struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,
-                    unsigned int *data) 	                                     |
+|                    unsigned int *data) 	                                     |
 +----------------------------------------------------------------------------+
 | Task              : Read  value  of the selected channel or port           |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev      : Driver handle                |
 |                     struct comedi_subdevice *s,   :pointer to subdevice structure
-                      struct comedi_insn *insn      :pointer to insn structure      |
+|                     struct comedi_insn *insn      :pointer to insn structure      |
 |                     unsigned int *data          : Data Pointer to read status  |
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
@@ -354,17 +354,17 @@ INT i_APCI2200_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI2200_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI2200_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 
-	UINT ui_Temp;
-	UINT ui_NoOfChannel = CR_CHAN(insn->chanspec);	// get the channel
+	unsigned int ui_Temp;
+	unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec);	/*  get the channel */
 	ui_Temp = data[0];
 	*data = inw(devpriv->iobase + APCI2200_DIGITAL_OP);
 	if (ui_Temp == 0) {
 		*data = (*data >> ui_NoOfChannel) & 0x1;
-	}			//if(ui_Temp==0)
+	}			/* if(ui_Temp==0) */
 	else {
 		if (ui_Temp == 1) {
 			switch (ui_NoOfChannel) {
@@ -386,28 +386,28 @@ INT i_APCI2200_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subde
 
 			default:
 				comedi_error(dev, " chan spec wrong");
-				return -EINVAL;	// "sorry channel spec wrong "
+				return -EINVAL;	/*  "sorry channel spec wrong " */
 
-			}	//switch(ui_NoOfChannels)
-		}		//if(ui_Temp==1)
+			}	/* switch(ui_NoOfChannels) */
+		}		/* if(ui_Temp==1) */
 		else {
 			printk("\nSpecified channel not supported \n");
-		}		//elseif(ui_Temp==1)
-	}			//elseif(ui_Temp==0)
+		}		/* elseif(ui_Temp==1) */
+	}			/* elseif(ui_Temp==0) */
 	return insn->n;
 }
 
 /*
 +----------------------------------------------------------------------------+
 | Function   Name   : int i_APCI2200_ConfigWatchdog(struct comedi_device *dev,
-                      struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data)  |
+|                      struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data)  |
 |				                                                     |
 +----------------------------------------------------------------------------+
 | Task              : Configures The Watchdog                                |
 +----------------------------------------------------------------------------+
 | Input Parameters  :   struct comedi_device *dev      : Driver handle              |
 |                     struct comedi_subdevice *s,   :pointer to subdevice structure
-                      struct comedi_insn *insn      :pointer to insn structure      |
+|                      struct comedi_insn *insn      :pointer to insn structure      |
 |                     unsigned int *data          : Data Pointer to read status                                                                                                             |
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
@@ -418,15 +418,15 @@ INT i_APCI2200_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subde
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI2200_ConfigWatchdog(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI2200_ConfigWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (data[0] == 0) {
-		//Disable the watchdog
+		/* Disable the watchdog */
 		outw(0x0,
 			devpriv->iobase + APCI2200_WATCHDOG +
 			APCI2200_WATCHDOG_ENABLEDISABLE);
-		//Loading the Reload value
+		/* Loading the Reload value */
 		outw(data[1],
 			devpriv->iobase + APCI2200_WATCHDOG +
 			APCI2200_WATCHDOG_RELOAD_VALUE);
@@ -434,11 +434,11 @@ int i_APCI2200_ConfigWatchdog(struct comedi_device * dev, struct comedi_subdevic
 		outw(data[1],
 			devpriv->iobase + APCI2200_WATCHDOG +
 			APCI2200_WATCHDOG_RELOAD_VALUE + 2);
-	}			//if(data[0]==0)
+	}			/* if(data[0]==0) */
 	else {
 		printk("\nThe input parameters are wrong\n");
 		return -EINVAL;
-	}			//elseif(data[0]==0)
+	}			/* elseif(data[0]==0) */
 
 	return insn->n;
 }
@@ -464,19 +464,19 @@ int i_APCI2200_ConfigWatchdog(struct comedi_device * dev, struct comedi_subdevic
     +----------------------------------------------------------------------------+
   */
 
-int i_APCI2200_StartStopWriteWatchdog(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI2200_StartStopWriteWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	switch (data[0]) {
-	case 0:		//stop the watchdog
-		outw(0x0, devpriv->iobase + APCI2200_WATCHDOG + APCI2200_WATCHDOG_ENABLEDISABLE);	//disable the watchdog
+	case 0:		/* stop the watchdog */
+		outw(0x0, devpriv->iobase + APCI2200_WATCHDOG + APCI2200_WATCHDOG_ENABLEDISABLE);	/* disable the watchdog */
 		break;
-	case 1:		//start the watchdog
+	case 1:		/* start the watchdog */
 		outw(0x0001,
 			devpriv->iobase + APCI2200_WATCHDOG +
 			APCI2200_WATCHDOG_ENABLEDISABLE);
 		break;
-	case 2:		//Software trigger
+	case 2:		/* Software trigger */
 		outw(0x0201,
 			devpriv->iobase + APCI2200_WATCHDOG +
 			APCI2200_WATCHDOG_ENABLEDISABLE);
@@ -484,7 +484,7 @@ int i_APCI2200_StartStopWriteWatchdog(struct comedi_device * dev, struct comedi_
 	default:
 		printk("\nSpecified functionality does not exist\n");
 		return -EINVAL;
-	}			// switch(data[0])
+	}			/*  switch(data[0]) */
 	return insn->n;
 }
 
@@ -492,13 +492,13 @@ int i_APCI2200_StartStopWriteWatchdog(struct comedi_device * dev, struct comedi_
 +----------------------------------------------------------------------------+
 | Function   Name   : int i_APCI2200_ReadWatchdog                            |
 |			(struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,
-                    unsigned int *data); 	                                     |
+|                    unsigned int *data); 	                                     |
 +----------------------------------------------------------------------------+
 | Task              : Read The Watchdog                                      |
 +----------------------------------------------------------------------------+
 | Input Parameters  :   struct comedi_device *dev      : Driver handle              |
 |                     struct comedi_subdevice *s,   :pointer to subdevice structure
-                      struct comedi_insn *insn      :pointer to insn structure      |
+|                      struct comedi_insn *insn      :pointer to insn structure      |
 |                     unsigned int *data          : Data Pointer to read status  |
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
@@ -509,8 +509,8 @@ int i_APCI2200_StartStopWriteWatchdog(struct comedi_device * dev, struct comedi_
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI2200_ReadWatchdog(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI2200_ReadWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	data[0] =
 		inw(devpriv->iobase + APCI2200_WATCHDOG +
@@ -533,9 +533,9 @@ int i_APCI2200_ReadWatchdog(struct comedi_device * dev, struct comedi_subdevice
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI2200_Reset(struct comedi_device * dev)
+int i_APCI2200_Reset(struct comedi_device *dev)
 {
-	outw(0x0, devpriv->iobase + APCI2200_DIGITAL_OP);	//RESETS THE DIGITAL OUTPUTS
+	outw(0x0, devpriv->iobase + APCI2200_DIGITAL_OP);	/* RESETS THE DIGITAL OUTPUTS */
 	outw(0x0,
 		devpriv->iobase + APCI2200_WATCHDOG +
 		APCI2200_WATCHDOG_ENABLEDISABLE);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.h
index 0a115b4c44c..63e5f1fcecc 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.h
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.h
@@ -17,39 +17,39 @@
 
 /*********      Definitions for APCI-2200 card  *****/
 
-// Card Specific information
+/* Card Specific information */
 #define APCI2200_BOARD_VENDOR_ID                 0x15b8
 #define APCI2200_ADDRESS_RANGE                   64
 
-//DIGITAL INPUT-OUTPUT DEFINE
+/* DIGITAL INPUT-OUTPUT DEFINE */
 
 #define APCI2200_DIGITAL_OP                 	4
 #define APCI2200_DIGITAL_IP                     0
 
-// TIMER COUNTER WATCHDOG DEFINES
+/* TIMER COUNTER WATCHDOG DEFINES */
 
 #define APCI2200_WATCHDOG                          0x08
 #define APCI2200_WATCHDOG_ENABLEDISABLE            12
 #define APCI2200_WATCHDOG_RELOAD_VALUE             4
 #define APCI2200_WATCHDOG_STATUS                   16
 
-// Hardware Layer  functions for Apci2200
+/* Hardware Layer  functions for Apci2200 */
 
-//Digital Input
-INT i_APCI2200_ReadMoreDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
+/* Digital Input */
+int i_APCI2200_ReadMoreDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
 				    struct comedi_insn *insn, unsigned int *data);
-INT i_APCI2200_Read1DigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI2200_Read1DigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
 				 struct comedi_insn *insn, unsigned int *data);
 
-//Digital Output
+/* Digital Output */
 int i_APCI2200_ConfigDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
 				   struct comedi_insn *insn, unsigned int *data);
-INT i_APCI2200_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI2200_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
 				  struct comedi_insn *insn, unsigned int *data);
-INT i_APCI2200_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI2200_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
 				 struct comedi_insn *insn, unsigned int *data);
 
-// TIMER
+/* TIMER */
 int i_APCI2200_ConfigWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
 			      struct comedi_insn *insn, unsigned int *data);
 int i_APCI2200_StartStopWriteWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
@@ -57,5 +57,5 @@ int i_APCI2200_StartStopWriteWatchdog(struct comedi_device *dev, struct comedi_s
 int i_APCI2200_ReadWatchdog(struct comedi_device *dev, struct comedi_subdevice *s,
 			    struct comedi_insn *insn, unsigned int *data);
 
-//reset
-INT i_APCI2200_Reset(struct comedi_device *dev);
+/* reset */
+int i_APCI2200_Reset(struct comedi_device *dev);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
index 68eb8dfd513..169cee41b87 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
@@ -3,13 +3,13 @@
 
 Copyright (C) 2004,2005  ADDI-DATA GmbH for the source code of this module.
 
-        ADDI-DATA GmbH
-        Dieselstrasse 3
-        D-77833 Ottersweier
-        Tel: +19(0)7223/9493-0
-        Fax: +49(0)7223/9493-92
-        http://www.addi-data-com
-        info@addi-data.com
+	ADDI-DATA GmbH
+	Dieselstrasse 3
+	D-77833 Ottersweier
+	Tel: +19(0)7223/9493-0
+	Fax: +49(0)7223/9493-92
+	http://www.addi-data-com
+	info@addi-data.com
 
 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
 
@@ -45,9 +45,9 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 */
 
 #include "hwdrv_apci3120.h"
-static UINT ui_Temp = 0;
+static unsigned int ui_Temp = 0;
 
-// FUNCTION DEFINITIONS
+/* FUNCTION DEFINITIONS */
 
 /*
 +----------------------------------------------------------------------------+
@@ -74,20 +74,20 @@ static UINT ui_Temp = 0;
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3120_InsnConfigAnalogInput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI3120_InsnConfigAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT i;
+	unsigned int i;
 
 	if ((data[0] != APCI3120_EOC_MODE) && (data[0] != APCI3120_EOS_MODE))
 		return -1;
 
-	// Check for Conversion time to be added ??
+	/*  Check for Conversion time to be added ?? */
 	devpriv->ui_EocEosConversionTime = data[2];
 
 	if (data[0] == APCI3120_EOS_MODE) {
 
-		//Test the number of the channel
+		/* Test the number of the channel */
 		for (i = 0; i < data[3]; i++) {
 
 			if (CR_CHAN(data[4 + i]) >= this_board->i_NbrAiChannel) {
@@ -102,14 +102,14 @@ int i_APCI3120_InsnConfigAnalogInput(struct comedi_device * dev, struct comedi_s
 			devpriv->b_EocEosInterrupt = APCI3120_ENABLE;
 		} else
 			devpriv->b_EocEosInterrupt = APCI3120_DISABLE;
-		// Copy channel list and Range List to devpriv
+		/*  Copy channel list and Range List to devpriv */
 
 		devpriv->ui_AiNbrofChannels = data[3];
 		for (i = 0; i < devpriv->ui_AiNbrofChannels; i++) {
 			devpriv->ui_AiChannelList[i] = data[4 + i];
 		}
 
-	} else			// EOC
+	} else			/*  EOC */
 	{
 		devpriv->b_InterruptMode = APCI3120_EOC_MODE;
 		if (data[1]) {
@@ -145,28 +145,28 @@ int i_APCI3120_InsnConfigAnalogInput(struct comedi_device * dev, struct comedi_s
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3120_InsnReadAnalogInput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI3120_InsnReadAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	USHORT us_ConvertTiming, us_TmpValue, i;
-	BYTE b_Tmp;
+	unsigned short us_ConvertTiming, us_TmpValue, i;
+	unsigned char b_Tmp;
 
-	// fix convertion time to 10 us
+	/*  fix convertion time to 10 us */
 	if (!devpriv->ui_EocEosConversionTime) {
 		printk("No timer0 Value using 10 us\n");
 		us_ConvertTiming = 10;
 	} else
-		us_ConvertTiming = (USHORT) (devpriv->ui_EocEosConversionTime / 1000);	// nano to useconds
+		us_ConvertTiming = (unsigned short) (devpriv->ui_EocEosConversionTime / 1000);	/*  nano to useconds */
 
-	// this_board->i_hwdrv_InsnReadAnalogInput(dev,us_ConvertTiming,insn->n,&insn->chanspec,data,insn->unused[0]);
+	/*  this_board->i_hwdrv_InsnReadAnalogInput(dev,us_ConvertTiming,insn->n,&insn->chanspec,data,insn->unused[0]); */
 
-	// Clear software registers
+	/*  Clear software registers */
 	devpriv->b_TimerSelectMode = 0;
 	devpriv->b_ModeSelectRegister = 0;
 	devpriv->us_OutputRegister = 0;
-//        devpriv->b_DigitalOutputRegister=0;
+/* devpriv->b_DigitalOutputRegister=0; */
 
-	if (insn->unused[0] == 222)	// second insn read
+	if (insn->unused[0] == 222)	/*  second insn read */
 	{
 
 		for (i = 0; i < insn->n; i++) {
@@ -174,14 +174,16 @@ int i_APCI3120_InsnReadAnalogInput(struct comedi_device * dev, struct comedi_sub
 		}
 
 	} else {
-		devpriv->tsk_Current = current;	// Save the current process task structure
-		//Testing if board have the new Quartz and calculate the time value
-		//to set in the timer
+		devpriv->tsk_Current = current;	/*  Save the current process task structure */
+/*
+ * Testing if board have the new Quartz and calculate the time value
+ * to set in the timer
+ */
 
 		us_TmpValue =
-			(USHORT) inw(devpriv->iobase + APCI3120_RD_STATUS);
+			(unsigned short) inw(devpriv->iobase + APCI3120_RD_STATUS);
 
-		//EL250804: Testing if board APCI3120 have the new Quartz or if it is an APCI3001
+		/* EL250804: Testing if board APCI3120 have the new Quartz or if it is an APCI3001 */
 		if ((us_TmpValue & 0x00B0) == 0x00B0
 			|| !strcmp(this_board->pc_DriverName, "apci3001")) {
 			us_ConvertTiming = (us_ConvertTiming * 2) - 2;
@@ -190,25 +192,26 @@ int i_APCI3120_InsnReadAnalogInput(struct comedi_device * dev, struct comedi_sub
 				((us_ConvertTiming * 12926) / 10000) - 1;
 		}
 
-		us_TmpValue = (USHORT) devpriv->b_InterruptMode;
+		us_TmpValue = (unsigned short) devpriv->b_InterruptMode;
 
 		switch (us_TmpValue) {
 
 		case APCI3120_EOC_MODE:
 
-			// Testing the interrupt flag and set the EOC bit
-			// Clears the FIFO
+/*
+ * Testing the interrupt flag and set the EOC bit Clears the FIFO
+ */
 			inw(devpriv->iobase + APCI3120_RESET_FIFO);
 
-			// Initialize the sequence array
+			/*  Initialize the sequence array */
 
-			//if (!i_APCI3120_SetupChannelList(dev,s,1,chanlist,0))  return -EINVAL;
+			/* if (!i_APCI3120_SetupChannelList(dev,s,1,chanlist,0))  return -EINVAL; */
 
 			if (!i_APCI3120_SetupChannelList(dev, s, 1,
 					&insn->chanspec, 0))
 				return -EINVAL;
 
-			//Initialize Timer 0 mode 4
+			/* Initialize Timer 0 mode 4 */
 			devpriv->b_TimerSelectMode =
 				(devpriv->
 				b_TimerSelectMode & 0xFC) |
@@ -216,14 +219,14 @@ int i_APCI3120_InsnReadAnalogInput(struct comedi_device * dev, struct comedi_sub
 			outb(devpriv->b_TimerSelectMode,
 				devpriv->iobase + APCI3120_TIMER_CRT1);
 
-			// Reset the scan bit and Disables the  EOS, DMA, EOC interrupt
+			/*  Reset the scan bit and Disables the  EOS, DMA, EOC interrupt */
 			devpriv->b_ModeSelectRegister =
 				devpriv->
 				b_ModeSelectRegister & APCI3120_DISABLE_SCAN;
 
 			if (devpriv->b_EocEosInterrupt == APCI3120_ENABLE) {
 
-				//Disables the EOS,DMA and enables the EOC interrupt
+				/* Disables the EOS,DMA and enables the EOC interrupt */
 				devpriv->b_ModeSelectRegister =
 					(devpriv->
 					b_ModeSelectRegister &
@@ -241,7 +244,7 @@ int i_APCI3120_InsnReadAnalogInput(struct comedi_device * dev, struct comedi_sub
 			outb(devpriv->b_ModeSelectRegister,
 				devpriv->iobase + APCI3120_WRITE_MODE_SELECT);
 
-			// Sets gate 0
+			/*  Sets gate 0 */
 			devpriv->us_OutputRegister =
 				(devpriv->
 				us_OutputRegister & APCI3120_CLEAR_PA_PR) |
@@ -249,30 +252,30 @@ int i_APCI3120_InsnReadAnalogInput(struct comedi_device * dev, struct comedi_sub
 			outw(devpriv->us_OutputRegister,
 				devpriv->iobase + APCI3120_WR_ADDRESS);
 
-			// Select Timer 0
+			/*  Select Timer 0 */
 			b_Tmp = ((devpriv->
 					b_DigitalOutputRegister) & 0xF0) |
 				APCI3120_SELECT_TIMER_0_WORD;
 			outb(b_Tmp, devpriv->iobase + APCI3120_TIMER_CRT0);
 
-			//Set the convertion time
+			/* Set the convertion time */
 			outw(us_ConvertTiming,
 				devpriv->iobase + APCI3120_TIMER_VALUE);
 
 			us_TmpValue =
-				(USHORT) inw(dev->iobase + APCI3120_RD_STATUS);
+				(unsigned short) inw(dev->iobase + APCI3120_RD_STATUS);
 
 			if (devpriv->b_EocEosInterrupt == APCI3120_DISABLE) {
 
 				do {
-					// Waiting for the end of conversion
+					/*  Waiting for the end of conversion */
 					us_TmpValue =
 						inw(devpriv->iobase +
 						APCI3120_RD_STATUS);
 				} while ((us_TmpValue & APCI3120_EOC) ==
 					APCI3120_EOC);
 
-				//Read the result in FIFO  and put it in insn data pointer
+				/* Read the result in FIFO  and put it in insn data pointer */
 				us_TmpValue = inw(devpriv->iobase + 0);
 				*data = us_TmpValue;
 
@@ -284,9 +287,9 @@ int i_APCI3120_InsnReadAnalogInput(struct comedi_device * dev, struct comedi_sub
 		case APCI3120_EOS_MODE:
 
 			inw(devpriv->iobase);
-			// Clears the FIFO
+			/*  Clears the FIFO */
 			inw(devpriv->iobase + APCI3120_RESET_FIFO);
-			// clear PA PR  and disable timer 0
+			/*  clear PA PR  and disable timer 0 */
 
 			devpriv->us_OutputRegister =
 				(devpriv->
@@ -301,7 +304,7 @@ int i_APCI3120_InsnReadAnalogInput(struct comedi_device * dev, struct comedi_sub
 					devpriv->ui_AiChannelList, 0))
 				return -EINVAL;
 
-			//Initialize Timer 0 mode 2
+			/* Initialize Timer 0 mode 2 */
 			devpriv->b_TimerSelectMode =
 				(devpriv->
 				b_TimerSelectMode & 0xFC) |
@@ -309,26 +312,26 @@ int i_APCI3120_InsnReadAnalogInput(struct comedi_device * dev, struct comedi_sub
 			outb(devpriv->b_TimerSelectMode,
 				devpriv->iobase + APCI3120_TIMER_CRT1);
 
-			//Select Timer 0
+			/* Select Timer 0 */
 			b_Tmp = ((devpriv->
 					b_DigitalOutputRegister) & 0xF0) |
 				APCI3120_SELECT_TIMER_0_WORD;
 			outb(b_Tmp, devpriv->iobase + APCI3120_TIMER_CRT0);
 
-			//Set the convertion time
+			/* Set the convertion time */
 			outw(us_ConvertTiming,
 				devpriv->iobase + APCI3120_TIMER_VALUE);
 
-			//Set the scan bit
+			/* Set the scan bit */
 			devpriv->b_ModeSelectRegister =
 				devpriv->
 				b_ModeSelectRegister | APCI3120_ENABLE_SCAN;
 			outb(devpriv->b_ModeSelectRegister,
 				devpriv->iobase + APCI3120_WRITE_MODE_SELECT);
 
-			//If Interrupt function is loaded
+			/* If Interrupt function is loaded */
 			if (devpriv->b_EocEosInterrupt == APCI3120_ENABLE) {
-				//Disables the EOC,DMA and enables the EOS interrupt
+				/* Disables the EOC,DMA and enables the EOS interrupt */
 				devpriv->b_ModeSelectRegister =
 					(devpriv->
 					b_ModeSelectRegister &
@@ -347,7 +350,7 @@ int i_APCI3120_InsnReadAnalogInput(struct comedi_device * dev, struct comedi_sub
 
 			inw(devpriv->iobase + APCI3120_RD_STATUS);
 
-			//Sets gate 0
+			/* Sets gate 0 */
 
 			devpriv->us_OutputRegister =
 				devpriv->
@@ -355,28 +358,27 @@ int i_APCI3120_InsnReadAnalogInput(struct comedi_device * dev, struct comedi_sub
 			outw(devpriv->us_OutputRegister,
 				devpriv->iobase + APCI3120_WR_ADDRESS);
 
-			//Start conversion
+			/* Start conversion */
 			outw(0, devpriv->iobase + APCI3120_START_CONVERSION);
 
-			//Waiting of end of convertion if interrupt is not installed
+			/* Waiting of end of convertion if interrupt is not installed */
 			if (devpriv->b_EocEosInterrupt == APCI3120_DISABLE) {
-				//Waiting the end of convertion
+				/* Waiting the end of convertion */
 				do {
 					us_TmpValue =
 						inw(devpriv->iobase +
 						APCI3120_RD_STATUS);
-				}
-				while ((us_TmpValue & APCI3120_EOS) !=
-					APCI3120_EOS);
+				} while ((us_TmpValue & APCI3120_EOS) !=
+					 APCI3120_EOS);
 
 				for (i = 0; i < devpriv->ui_AiNbrofChannels;
 					i++) {
-					//Read the result in FIFO and write them in shared memory
+					/* Read the result in FIFO and write them in shared memory */
 					us_TmpValue = inw(devpriv->iobase);
-					data[i] = (UINT) us_TmpValue;
+					data[i] = (unsigned int) us_TmpValue;
 				}
 
-				devpriv->b_InterruptMode = APCI3120_EOC_MODE;	// Restore defaults.
+				devpriv->b_InterruptMode = APCI3120_EOC_MODE;	/*  Restore defaults. */
 			}
 			break;
 
@@ -384,7 +386,7 @@ int i_APCI3120_InsnReadAnalogInput(struct comedi_device * dev, struct comedi_sub
 			printk("inputs wrong\n");
 
 		}
-		devpriv->ui_EocEosConversionTime = 0;	// re initializing the variable;
+		devpriv->ui_EocEosConversionTime = 0;	/*  re initializing the variable; */
 	}
 
 	return insn->n;
@@ -409,38 +411,41 @@ int i_APCI3120_InsnReadAnalogInput(struct comedi_device * dev, struct comedi_sub
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3120_StopCyclicAcquisition(struct comedi_device * dev, struct comedi_subdevice * s)
+int i_APCI3120_StopCyclicAcquisition(struct comedi_device *dev, struct comedi_subdevice *s)
 {
-	// Disable A2P Fifo write and AMWEN signal
+	/*  Disable A2P Fifo write and AMWEN signal */
 	outw(0, devpriv->i_IobaseAddon + 4);
 
-	//Disable Bus Master ADD ON
+	/* Disable Bus Master ADD ON */
 	outw(APCI3120_ADD_ON_AGCSTS_LOW, devpriv->i_IobaseAddon + 0);
 	outw(0, devpriv->i_IobaseAddon + 2);
 	outw(APCI3120_ADD_ON_AGCSTS_HIGH, devpriv->i_IobaseAddon + 0);
 	outw(0, devpriv->i_IobaseAddon + 2);
 
-	//Disable BUS Master PCI
+	/* Disable BUS Master PCI */
 	outl(0, devpriv->i_IobaseAmcc + AMCC_OP_REG_MCSR);
 
-	//outl(inl(devpriv->i_IobaseAmcc+AMCC_OP_REG_INTCSR)&(~AINT_WRITE_COMPL), devpriv->i_IobaseAmcc+AMCC_OP_REG_INTCSR);    // stop amcc irqs
-	//outl(inl(devpriv->i_IobaseAmcc+AMCC_OP_REG_MCSR)&(~EN_A2P_TRANSFERS), devpriv->i_IobaseAmcc+AMCC_OP_REG_MCSR); // stop DMA
+	/* outl(inl(devpriv->i_IobaseAmcc+AMCC_OP_REG_INTCSR)&(~AINT_WRITE_COMPL),
+	 * devpriv->i_IobaseAmcc+AMCC_OP_REG_INTCSR);  stop amcc irqs */
+
+	/* outl(inl(devpriv->i_IobaseAmcc+AMCC_OP_REG_MCSR)&(~EN_A2P_TRANSFERS),
+	 * devpriv->i_IobaseAmcc+AMCC_OP_REG_MCSR);  stop DMA */
 
-	//Disable ext trigger
+	/* Disable ext trigger */
 	i_APCI3120_ExttrigDisable(dev);
 
 	devpriv->us_OutputRegister = 0;
-	//stop  counters
+	/* stop  counters */
 	outw(devpriv->
 		us_OutputRegister & APCI3120_DISABLE_TIMER0 &
 		APCI3120_DISABLE_TIMER1, dev->iobase + APCI3120_WR_ADDRESS);
 
 	outw(APCI3120_DISABLE_ALL_TIMER, dev->iobase + APCI3120_WR_ADDRESS);
 
-	//DISABLE_ALL_INTERRUPT
+	/* DISABLE_ALL_INTERRUPT */
 	outb(APCI3120_DISABLE_ALL_INTERRUPT,
 		dev->iobase + APCI3120_WRITE_MODE_SELECT);
-	//Flush FIFO
+	/* Flush FIFO */
 	inb(dev->iobase + APCI3120_RESET_FIFO);
 	inw(dev->iobase + APCI3120_RD_STATUS);
 	devpriv->ui_AiActualScan = 0;
@@ -476,13 +481,13 @@ int i_APCI3120_StopCyclicAcquisition(struct comedi_device * dev, struct comedi_s
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3120_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+int i_APCI3120_CommandTestAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
-	int tmp;		// divisor1,divisor2;
+	int tmp;		/*  divisor1,divisor2; */
 
-	// step 1: make sure trigger sources are trivially valid
+	/*  step 1: make sure trigger sources are trivially valid */
 
 	tmp = cmd->start_src;
 	cmd->start_src &= TRIG_NOW | TRIG_EXT;
@@ -512,7 +517,7 @@ int i_APCI3120_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_
 	if (err)
 		return 1;
 
-	//step 2: make sure trigger sources are unique and mutually compatible
+	/* step 2: make sure trigger sources are unique and mutually compatible */
 
 	if (cmd->start_src != TRIG_NOW && cmd->start_src != TRIG_EXT) {
 		err++;
@@ -536,14 +541,14 @@ int i_APCI3120_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_
 	if (err)
 		return 2;
 
-	// step 3: make sure arguments are trivially compatible
+	/*  step 3: make sure arguments are trivially compatible */
 
 	if (cmd->start_arg != 0) {
 		cmd->start_arg = 0;
 		err++;
 	}
 
-	if (cmd->scan_begin_src == TRIG_TIMER)	// Test Delay timing
+	if (cmd->scan_begin_src == TRIG_TIMER)	/*  Test Delay timing */
 	{
 		if (cmd->scan_begin_arg < this_board->ui_MinDelaytimeNs) {
 			cmd->scan_begin_arg = this_board->ui_MinDelaytimeNs;
@@ -551,7 +556,7 @@ int i_APCI3120_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_
 		}
 	}
 
-	if (cmd->convert_src == TRIG_TIMER)	// Test Acquisition timing
+	if (cmd->convert_src == TRIG_TIMER)	/*  Test Acquisition timing */
 	{
 		if (cmd->scan_begin_src == TRIG_TIMER) {
 			if ((cmd->convert_arg)
@@ -585,7 +590,7 @@ int i_APCI3120_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_
 			cmd->stop_arg = 1;
 			err++;
 		}
-	} else {		// TRIG_NONE
+	} else {		/*  TRIG_NONE */
 		if (cmd->stop_arg != 0) {
 			cmd->stop_arg = 0;
 			err++;
@@ -595,7 +600,7 @@ int i_APCI3120_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_
 	if (err)
 		return 3;
 
-	// step 4: fix up any arguments
+	/*  step 4: fix up any arguments */
 
 	if (cmd->convert_src == TRIG_TIMER) {
 
@@ -633,19 +638,19 @@ int i_APCI3120_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3120_CommandAnalogInput(struct comedi_device * dev, struct comedi_subdevice * s)
+int i_APCI3120_CommandAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct comedi_cmd *cmd = &s->async->cmd;
 
-	//loading private structure with cmd structure inputs
+	/* loading private structure with cmd structure inputs */
 	devpriv->ui_AiFlags = cmd->flags;
 	devpriv->ui_AiNbrofChannels = cmd->chanlist_len;
 	devpriv->ui_AiScanLength = cmd->scan_end_arg;
 	devpriv->pui_AiChannelList = cmd->chanlist;
 
-	//UPDATE-0.7.57->0.7.68devpriv->AiData=s->async->data;
+	/* UPDATE-0.7.57->0.7.68devpriv->AiData=s->async->data; */
 	devpriv->AiData = s->async->prealloc_buf;
-	//UPDATE-0.7.57->0.7.68devpriv->ui_AiDataLength=s->async->data_len;
+	/* UPDATE-0.7.57->0.7.68devpriv->ui_AiDataLength=s->async->data_len; */
 	devpriv->ui_AiDataLength = s->async->prealloc_bufsz;
 
 	if (cmd->stop_src == TRIG_COUNT) {
@@ -654,11 +659,11 @@ int i_APCI3120_CommandAnalogInput(struct comedi_device * dev, struct comedi_subd
 		devpriv->ui_AiNbrofScans = 0;
 	}
 
-	devpriv->ui_AiTimer0 = 0;	// variables changed to timer0,timer1
+	devpriv->ui_AiTimer0 = 0;	/*  variables changed to timer0,timer1 */
 	devpriv->ui_AiTimer1 = 0;
 	if ((devpriv->ui_AiNbrofScans == 0) || (devpriv->ui_AiNbrofScans == -1))
-		devpriv->b_AiContinuous = 1;	// user want neverending analog acquisition
-	// stopped using cancel
+		devpriv->b_AiContinuous = 1;	/*  user want neverending analog acquisition */
+	/*  stopped using cancel */
 
 	if (cmd->start_src == TRIG_EXT)
 		devpriv->b_ExttrigEnable = APCI3120_ENABLE;
@@ -666,22 +671,22 @@ int i_APCI3120_CommandAnalogInput(struct comedi_device * dev, struct comedi_subd
 		devpriv->b_ExttrigEnable = APCI3120_DISABLE;
 
 	if (cmd->scan_begin_src == TRIG_FOLLOW) {
-		// mode 1 or 3
+		/*  mode 1 or 3 */
 		if (cmd->convert_src == TRIG_TIMER) {
-			// mode 1
+			/*  mode 1 */
 
-			devpriv->ui_AiTimer0 = cmd->convert_arg;	// timer constant in nano seconds
-			//return this_board->i_hwdrv_CommandAnalogInput(1,dev,s);
+			devpriv->ui_AiTimer0 = cmd->convert_arg;	/*  timer constant in nano seconds */
+			/* return this_board->i_hwdrv_CommandAnalogInput(1,dev,s); */
 			return i_APCI3120_CyclicAnalogInput(1, dev, s);
 		}
 
 	}
 	if ((cmd->scan_begin_src == TRIG_TIMER)
 		&& (cmd->convert_src == TRIG_TIMER)) {
-		// mode 2
+		/*  mode 2 */
 		devpriv->ui_AiTimer1 = cmd->scan_begin_arg;
-		devpriv->ui_AiTimer0 = cmd->convert_arg;	// variable changed timer2 to timer0
-		//return this_board->i_hwdrv_CommandAnalogInput(2,dev,s);
+		devpriv->ui_AiTimer0 = cmd->convert_arg;	/*  variable changed timer2 to timer0 */
+		/* return this_board->i_hwdrv_CommandAnalogInput(2,dev,s); */
 		return i_APCI3120_CyclicAnalogInput(2, dev, s);
 	}
 	return -1;
@@ -707,73 +712,74 @@ int i_APCI3120_CommandAnalogInput(struct comedi_device * dev, struct comedi_subd
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device * dev,
-	struct comedi_subdevice * s)
+int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device *dev,
+	struct comedi_subdevice *s)
 {
-	BYTE b_Tmp;
-	UINT ui_Tmp, ui_DelayTiming = 0, ui_TimerValue1 = 0, dmalen0 =
+	unsigned char b_Tmp;
+	unsigned int ui_Tmp, ui_DelayTiming = 0, ui_TimerValue1 = 0, dmalen0 =
 		0, dmalen1 = 0, ui_TimerValue2 =
 		0, ui_TimerValue0, ui_ConvertTiming;
-	USHORT us_TmpValue;
+	unsigned short us_TmpValue;
 
-	//BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver
-	//devpriv->b_AiCyclicAcquisition=APCI3120_ENABLE;
-	//END JK 07.05.04: Comparison between WIN32 and Linux driver
+	/* BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver */
+	/* devpriv->b_AiCyclicAcquisition=APCI3120_ENABLE; */
+	/* END JK 07.05.04: Comparison between WIN32 and Linux driver */
 
 	/*******************/
 	/* Resets the FIFO */
 	/*******************/
 	inb(dev->iobase + APCI3120_RESET_FIFO);
 
-	//BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver
-	//inw(dev->iobase+APCI3120_RD_STATUS);
-	//END JK 07.05.04: Comparison between WIN32 and Linux driver
+	/* BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver */
+	/* inw(dev->iobase+APCI3120_RD_STATUS); */
+	/* END JK 07.05.04: Comparison between WIN32 and Linux driver */
 
 	/***************************/
 	/* Acquisition initialized */
 	/***************************/
-	//BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver
+	/* BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver */
 	devpriv->b_AiCyclicAcquisition = APCI3120_ENABLE;
-	//END JK 07.05.04: Comparison between WIN32 and Linux driver
+	/* END JK 07.05.04: Comparison between WIN32 and Linux driver */
 
-	// clear software  registers
+	/*  clear software  registers */
 	devpriv->b_TimerSelectMode = 0;
 	devpriv->us_OutputRegister = 0;
 	devpriv->b_ModeSelectRegister = 0;
-	//devpriv->b_DigitalOutputRegister=0;
+	/* devpriv->b_DigitalOutputRegister=0; */
 
-	//COMMENT JK 07.05.04: Followings calls are in i_APCI3120_StartAnalogInputAcquisition
+	/* COMMENT JK 07.05.04: Followings calls are in i_APCI3120_StartAnalogInputAcquisition */
 
-   /****************************/
-	/* Clear Timer Write TC INT */
-   /****************************/
+	/****************************/
+	/* Clear Timer Write TC int */
+	/****************************/
 	outl(APCI3120_CLEAR_WRITE_TC_INT,
 		devpriv->i_IobaseAmcc + APCI3120_AMCC_OP_REG_INTCSR);
 
-   /************************************/
+	/************************************/
 	/* Clears the timer status register */
-   /************************************/
-	//BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver
-	//inw(dev->iobase+APCI3120_TIMER_STATUS_REGISTER);
-	inb(dev->iobase + APCI3120_TIMER_STATUS_REGISTER);
-	//END JK 07.05.04: Comparison between WIN32 and Linux driver
+	/************************************/
+
+	/* BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver */
+	/* inw(dev->iobase+APCI3120_TIMER_STATUS_REGISTER); */
+	/* inb(dev->iobase + APCI3120_TIMER_STATUS_REGISTER); */
+	/* END JK 07.05.04: Comparison between WIN32 and Linux driver */
 
-   /**************************/
+	/**************************/
 	/* Disables All Timer     */
 	/* Sets PR and PA to 0    */
-   /**************************/
+	/**************************/
 	devpriv->us_OutputRegister = devpriv->us_OutputRegister &
 		APCI3120_DISABLE_TIMER0 &
 		APCI3120_DISABLE_TIMER1 & APCI3120_CLEAR_PA_PR;
 
 	outw(devpriv->us_OutputRegister, dev->iobase + APCI3120_WR_ADDRESS);
 
-   /*******************/
+	/*******************/
 	/* Resets the FIFO */
-   /*******************/
-	//BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver
+	/*******************/
+	/* BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver */
 	inb(devpriv->iobase + APCI3120_RESET_FIFO);
-	//END JK 07.05.04: Comparison between WIN32 and Linux driver
+	/* END JK 07.05.04: Comparison between WIN32 and Linux driver */
 
 	devpriv->ui_AiActualScan = 0;
 	devpriv->ui_AiActualScanPosition = 0;
@@ -781,7 +787,7 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device * dev,
 	devpriv->ui_AiBufferPtr = 0;
 	devpriv->ui_DmaActualBuffer = 0;
 
-	// value for timer2  minus -2 has to be done .....dunno y??
+	/*  value for timer2  minus -2 has to be done .....dunno y?? */
 	ui_TimerValue2 = devpriv->ui_AiNbrofScans - 2;
 	ui_ConvertTiming = devpriv->ui_AiTimer0;
 
@@ -795,31 +801,31 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device * dev,
 			devpriv->pui_AiChannelList, 0))
 		return -EINVAL;
 
-	us_TmpValue = (USHORT) inw(dev->iobase + APCI3120_RD_STATUS);
+	us_TmpValue = (unsigned short) inw(dev->iobase + APCI3120_RD_STATUS);
 /*** EL241003 : add this section in comment because floats must not be used
-	 if((us_TmpValue & 0x00B0)==0x00B0)
+	if((us_TmpValue & 0x00B0)==0x00B0)
 	 {
-           f_ConvertValue=(((float)ui_ConvertTiming * 0.002) - 2);
-		ui_TimerValue0=(UINT)f_ConvertValue;
+		f_ConvertValue=(((float)ui_ConvertTiming * 0.002) - 2);
+		ui_TimerValue0=(unsigned int)f_ConvertValue;
 		if (mode==2)
 		{
 			f_DelayValue     = (((float)ui_DelayTiming * 0.00002) - 2);
-			ui_TimerValue1  =   (UINT) f_DelayValue;
+			ui_TimerValue1  =   (unsigned int) f_DelayValue;
 		}
 	 }
-   	 else
+	else
 	 {
 		f_ConvertValue=(((float)ui_ConvertTiming * 0.0012926) - 1);
-		ui_TimerValue0=(UINT)f_ConvertValue;
+		ui_TimerValue0=(unsigned int)f_ConvertValue;
 		if (mode == 2)
 		{
 		     f_DelayValue     = (((float)ui_DelayTiming * 0.000012926) - 1);
-		     ui_TimerValue1  =   (UINT) f_DelayValue;
+		     ui_TimerValue1  =   (unsigned int) f_DelayValue;
 		}
 	}
 ***********************************************************************************************/
 /*** EL241003 Begin : add this section to replace floats calculation by integer calculations **/
-	//EL250804: Testing if board APCI3120 have the new Quartz or if it is an APCI3001
+	/* EL250804: Testing if board APCI3120 have the new Quartz or if it is an APCI3001 */
 	if ((us_TmpValue & 0x00B0) == 0x00B0
 		|| !strcmp(this_board->pc_DriverName, "apci3001")) {
 		ui_TimerValue0 = ui_ConvertTiming * 2 - 2000;
@@ -844,79 +850,82 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device * dev,
 /*** EL241003 End ******************************************************************************/
 
 	if (devpriv->b_ExttrigEnable == APCI3120_ENABLE) {
-		i_APCI3120_ExttrigEnable(dev);	// activate EXT trigger
+		i_APCI3120_ExttrigEnable(dev);	/*  activate EXT trigger */
 	}
 	switch (mode) {
 	case 1:
-		// init timer0 in mode 2
+		/*  init timer0 in mode 2 */
 		devpriv->b_TimerSelectMode =
 			(devpriv->
 			b_TimerSelectMode & 0xFC) | APCI3120_TIMER_0_MODE_2;
 		outb(devpriv->b_TimerSelectMode,
 			dev->iobase + APCI3120_TIMER_CRT1);
 
-		//Select Timer 0
+		/* Select Timer 0 */
 		b_Tmp = ((devpriv->
 				b_DigitalOutputRegister) & 0xF0) |
 			APCI3120_SELECT_TIMER_0_WORD;
 		outb(b_Tmp, dev->iobase + APCI3120_TIMER_CRT0);
-		//Set the convertion time
-		outw(((USHORT) ui_TimerValue0),
+		/* Set the convertion time */
+		outw(((unsigned short) ui_TimerValue0),
 			dev->iobase + APCI3120_TIMER_VALUE);
 		break;
 
 	case 2:
-		// init timer1 in mode 2
+		/*  init timer1 in mode 2 */
 		devpriv->b_TimerSelectMode =
 			(devpriv->
 			b_TimerSelectMode & 0xF3) | APCI3120_TIMER_1_MODE_2;
 		outb(devpriv->b_TimerSelectMode,
 			dev->iobase + APCI3120_TIMER_CRT1);
 
-		//Select Timer 1
+		/* Select Timer 1 */
 		b_Tmp = ((devpriv->
 				b_DigitalOutputRegister) & 0xF0) |
 			APCI3120_SELECT_TIMER_1_WORD;
 		outb(b_Tmp, dev->iobase + APCI3120_TIMER_CRT0);
-		//Set the convertion time
-		outw(((USHORT) ui_TimerValue1),
+		/* Set the convertion time */
+		outw(((unsigned short) ui_TimerValue1),
 			dev->iobase + APCI3120_TIMER_VALUE);
 
-		// init timer0 in mode 2
+		/*  init timer0 in mode 2 */
 		devpriv->b_TimerSelectMode =
 			(devpriv->
 			b_TimerSelectMode & 0xFC) | APCI3120_TIMER_0_MODE_2;
 		outb(devpriv->b_TimerSelectMode,
 			dev->iobase + APCI3120_TIMER_CRT1);
 
-		//Select Timer 0
+		/* Select Timer 0 */
 		b_Tmp = ((devpriv->
 				b_DigitalOutputRegister) & 0xF0) |
 			APCI3120_SELECT_TIMER_0_WORD;
 		outb(b_Tmp, dev->iobase + APCI3120_TIMER_CRT0);
 
-		//Set the convertion time
-		outw(((USHORT) ui_TimerValue0),
+		/* Set the convertion time */
+		outw(((unsigned short) ui_TimerValue0),
 			dev->iobase + APCI3120_TIMER_VALUE);
 		break;
 
 	}
-	//   ##########common for all modes#################
+	/*    ##########common for all modes################# */
 
 	/***********************/
 	/* Clears the SCAN bit */
 	/***********************/
-	//BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver
-	//devpriv->b_ModeSelectRegister=devpriv->b_ModeSelectRegister | APCI3120_DISABLE_SCAN;
+
+	/* BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver */
+	/* devpriv->b_ModeSelectRegister=devpriv->b_ModeSelectRegister | APCI3120_DISABLE_SCAN; */
+
 	devpriv->b_ModeSelectRegister = devpriv->b_ModeSelectRegister &
 		APCI3120_DISABLE_SCAN;
-	//END JK 07.05.04: Comparison between WIN32 and Linux driver
+	/* END JK 07.05.04: Comparison between WIN32 and Linux driver */
+
 	outb(devpriv->b_ModeSelectRegister,
 		dev->iobase + APCI3120_WRITE_MODE_SELECT);
 
-	// If DMA is disabled
+	/*  If DMA is disabled */
 	if (devpriv->us_UseDma == APCI3120_DISABLE) {
-		// disable EOC and enable EOS
+		/*  disable EOC and enable EOS */
 		devpriv->b_InterruptMode = APCI3120_EOS_MODE;
 		devpriv->b_EocEosInterrupt = APCI3120_ENABLE;
 
@@ -928,15 +937,17 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device * dev,
 			dev->iobase + APCI3120_WRITE_MODE_SELECT);
 
 		if (!devpriv->b_AiContinuous) {
-			// configure Timer2 For counting  EOS
-			//Reset gate 2 of Timer 2 to disable it (Set Bit D14 to 0)
+/*
+ * configure Timer2 For counting EOS Reset gate 2 of Timer 2 to
+ * disable it (Set Bit D14 to 0)
+ */
 			devpriv->us_OutputRegister =
 				devpriv->
 				us_OutputRegister & APCI3120_DISABLE_TIMER2;
 			outw(devpriv->us_OutputRegister,
 				dev->iobase + APCI3120_WR_ADDRESS);
 
-			// DISABLE TIMER INTERRUPT
+			/*  DISABLE TIMER intERRUPT */
 			devpriv->b_ModeSelectRegister =
 				devpriv->
 				b_ModeSelectRegister &
@@ -944,7 +955,7 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device * dev,
 			outb(devpriv->b_ModeSelectRegister,
 				dev->iobase + APCI3120_WRITE_MODE_SELECT);
 
-			//(1) Init timer 2 in mode 0 and write timer value
+			/* (1) Init timer 2 in mode 0 and write timer value */
 			devpriv->b_TimerSelectMode =
 				(devpriv->
 				b_TimerSelectMode & 0x0F) |
@@ -952,7 +963,7 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device * dev,
 			outb(devpriv->b_TimerSelectMode,
 				dev->iobase + APCI3120_TIMER_CRT1);
 
-			//Writing LOW WORD
+			/* Writing LOW unsigned short */
 			b_Tmp = ((devpriv->
 					b_DigitalOutputRegister) & 0xF0) |
 				APCI3120_SELECT_TIMER_2_LOW_WORD;
@@ -960,7 +971,7 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device * dev,
 			outw(LOWORD(ui_TimerValue2),
 				dev->iobase + APCI3120_TIMER_VALUE);
 
-			//Writing HIGH WORD
+			/* Writing HIGH unsigned short */
 			b_Tmp = ((devpriv->
 					b_DigitalOutputRegister) & 0xF0) |
 				APCI3120_SELECT_TIMER_2_HIGH_WORD;
@@ -968,20 +979,20 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device * dev,
 			outw(HIWORD(ui_TimerValue2),
 				dev->iobase + APCI3120_TIMER_VALUE);
 
-			//(2) Reset FC_TIMER BIT  Clearing timer status register
+			/* (2) Reset FC_TIMER BIT  Clearing timer status register */
 			inb(dev->iobase + APCI3120_TIMER_STATUS_REGISTER);
-			// enable timer counter and disable watch dog
+			/*  enable timer counter and disable watch dog */
 			devpriv->b_ModeSelectRegister =
 				(devpriv->
 				b_ModeSelectRegister |
 				APCI3120_ENABLE_TIMER_COUNTER) &
 				APCI3120_DISABLE_WATCHDOG;
-			// select EOS clock input for timer 2
+			/*  select EOS clock input for timer 2 */
 			devpriv->b_ModeSelectRegister =
 				devpriv->
 				b_ModeSelectRegister |
 				APCI3120_TIMER2_SELECT_EOS;
-			// Enable timer2  interrupt
+			/*  Enable timer2  interrupt */
 			devpriv->b_ModeSelectRegister =
 				devpriv->
 				b_ModeSelectRegister |
@@ -992,15 +1003,16 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device * dev,
 			devpriv->b_Timer2Interrupt = APCI3120_ENABLE;
 		}
 	} else {
-		// If DMA Enabled
-		//BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver
-		//inw(dev->iobase+0);// reset EOC bit
-		//END JK 07.05.04: Comparison between WIN32 and Linux driver
+		/* If DMA Enabled */
+
+		/* BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver */
+		/* inw(dev->iobase+0); reset EOC bit */
+		/* END JK 07.05.04: Comparison between WIN32 and Linux driver */
 		devpriv->b_InterruptMode = APCI3120_DMA_MODE;
 
-      /************************************/
+		/************************************/
 		/* Disables the EOC, EOS interrupt  */
-	  /************************************/
+		/************************************/
 		devpriv->b_ModeSelectRegister = devpriv->b_ModeSelectRegister &
 			APCI3120_DISABLE_EOC_INT & APCI3120_DISABLE_EOS_INT;
 
@@ -1012,18 +1024,18 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device * dev,
 
 		if (!devpriv->b_AiContinuous) {
 
-			if (dmalen0 > (devpriv->ui_AiNbrofScans * devpriv->ui_AiScanLength * 2)) {	// must we fill full first buffer?
+			if (dmalen0 > (devpriv->ui_AiNbrofScans * devpriv->ui_AiScanLength * 2)) {	/*  must we fill full first buffer? */
 				dmalen0 =
 					devpriv->ui_AiNbrofScans *
 					devpriv->ui_AiScanLength * 2;
-			} else if (dmalen1 > (devpriv->ui_AiNbrofScans * devpriv->ui_AiScanLength * 2 - dmalen0))	// and must we fill full second buffer when first is once filled?
+			} else if (dmalen1 > (devpriv->ui_AiNbrofScans * devpriv->ui_AiScanLength * 2 - dmalen0))	/*  and must we fill full second buffer when first is once filled? */
 				dmalen1 =
 					devpriv->ui_AiNbrofScans *
 					devpriv->ui_AiScanLength * 2 - dmalen0;
 		}
 
 		if (devpriv->ui_AiFlags & TRIG_WAKE_EOS) {
-			// don't we want wake up every scan?
+			/*  don't we want wake up every scan? */
 			if (dmalen0 > (devpriv->ui_AiScanLength * 2)) {
 				dmalen0 = devpriv->ui_AiScanLength * 2;
 				if (devpriv->ui_AiScanLength & 1)
@@ -1036,7 +1048,7 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device * dev,
 				if (dmalen1 < 4)
 					dmalen1 = 4;
 			}
-		} else {	// isn't output buff smaller that our DMA buff?
+		} else {	/*  isn't output buff smaller that our DMA buff? */
 			if (dmalen0 > (devpriv->ui_AiDataLength)) {
 				dmalen0 = devpriv->ui_AiDataLength;
 			}
@@ -1047,14 +1059,16 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device * dev,
 		devpriv->ui_DmaBufferUsesize[0] = dmalen0;
 		devpriv->ui_DmaBufferUsesize[1] = dmalen1;
 
-		//Initialize DMA
+		/* Initialize DMA */
 
-		// Set Transfer count enable bit and A2P_fifo reset bit in AGCSTS register
-		//1
+/*
+ * Set Transfer count enable bit and A2P_fifo reset bit in AGCSTS
+ * register 1
+ */
 		ui_Tmp = AGCSTS_TC_ENABLE | AGCSTS_RESET_A2P_FIFO;
 		outl(ui_Tmp, devpriv->i_IobaseAmcc + AMCC_OP_REG_AGCSTS);
 
-		// changed  since 16 bit interface for add on
+		/*  changed  since 16 bit interface for add on */
 		/*********************/
 		/* ENABLE BUS MASTER */
 		/*********************/
@@ -1066,104 +1080,121 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device * dev,
 		outw(APCI3120_ENABLE_TRANSFER_ADD_ON_HIGH,
 			devpriv->i_IobaseAddon + 2);
 
-		// TO VERIFIED
-		//BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver
+/*
+ * TO VERIFIED BEGIN JK 07.05.04: Comparison between WIN32 and Linux
+ * driver
+ */
 		outw(0x1000, devpriv->i_IobaseAddon + 2);
-		//END JK 07.05.04: Comparison between WIN32 and Linux driver
+		/* END JK 07.05.04: Comparison between WIN32 and Linux driver */
 
-		//2  No change
-		// A2P FIFO MANAGEMENT
-		// A2P fifo reset  & transfer control enable
-		 /***********************/
+		/* 2 No change */
 		/* A2P FIFO MANAGEMENT */
-		 /***********************/
+		/* A2P fifo reset & transfer control enable */
+
+		/***********************/
+		/* A2P FIFO MANAGEMENT */
+		/***********************/
 		outl(APCI3120_A2P_FIFO_MANAGEMENT, devpriv->i_IobaseAmcc +
 			APCI3120_AMCC_OP_MCSR);
 
-		//3
-		//beginning address of dma buf
-		//The 32 bit address of dma buffer is converted into two 16 bit addresses
-		// Can done by using _attach and put into into an array
-		// array used may be for differnet pages
+/*
+ * 3
+ * beginning address of dma buf The 32 bit address of dma buffer
+ * is converted into two 16 bit addresses Can done by using _attach
+ * and put into into an array array used may be for differnet pages
+ */
 
-		// DMA Start Adress Low
+		/*  DMA Start Adress Low */
 		outw(APCI3120_ADD_ON_MWAR_LOW, devpriv->i_IobaseAddon + 0);
 		outw((devpriv->ul_DmaBufferHw[0] & 0xFFFF),
 			devpriv->i_IobaseAddon + 2);
 
-		 /*************************/
+		/*************************/
 		/* DMA Start Adress High */
-		 /*************************/
+		/*************************/
 		outw(APCI3120_ADD_ON_MWAR_HIGH, devpriv->i_IobaseAddon + 0);
 		outw((devpriv->ul_DmaBufferHw[0] / 65536),
 			devpriv->i_IobaseAddon + 2);
 
-		//4
-		// amount of bytes to be transfered  set transfer count
-		// used ADDON MWTC register
-		//commented testing             outl(devpriv->ui_DmaBufferUsesize[0], devpriv->i_IobaseAddon+AMCC_OP_REG_AMWTC);
-
-		 /**************************/
+/*
+ * 4
+ * amount of bytes to be transfered set transfer count used ADDON
+ * MWTC register commented testing
+ * outl(devpriv->ui_DmaBufferUsesize[0],
+ * devpriv->i_IobaseAddon+AMCC_OP_REG_AMWTC);
+ */
+
+		/**************************/
 		/* Nbr of acquisition LOW */
-		 /**************************/
+		/**************************/
 		outw(APCI3120_ADD_ON_MWTC_LOW, devpriv->i_IobaseAddon + 0);
 		outw((devpriv->ui_DmaBufferUsesize[0] & 0xFFFF),
 			devpriv->i_IobaseAddon + 2);
 
-		 /***************************/
+		/***************************/
 		/* Nbr of acquisition HIGH */
-		 /***************************/
+		/***************************/
 		outw(APCI3120_ADD_ON_MWTC_HIGH, devpriv->i_IobaseAddon + 0);
 		outw((devpriv->ui_DmaBufferUsesize[0] / 65536),
 			devpriv->i_IobaseAddon + 2);
 
-		//5
-		// To configure A2P FIFO
-		// testing outl( FIFO_ADVANCE_ON_BYTE_2,devpriv->i_IobaseAmcc+AMCC_OP_REG_INTCSR);
+/*
+ * 5
+ * To configure A2P FIFO testing outl(
+ * FIFO_ADVANCE_ON_BYTE_2,devpriv->i_IobaseAmcc+AMCC_OP_REG_INTCSR);
+ */
 
 		/******************/
 		/* A2P FIFO RESET */
 		/******************/
-		// TO VERIFY
-		//BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver
+/*
+ * TO VERIFY BEGIN JK 07.05.04: Comparison between WIN32 and Linux
+ * driver
+ */
 		outl(0x04000000UL, devpriv->i_IobaseAmcc + AMCC_OP_REG_MCSR);
-		//END JK 07.05.04: Comparison between WIN32 and Linux driver
+		/* END JK 07.05.04: Comparison between WIN32 and Linux driver */
+
+/*
+ * 6
+ * ENABLE A2P FIFO WRITE AND ENABLE AMWEN AMWEN_ENABLE |
+ * A2P_FIFO_WRITE_ENABLE (0x01|0x02)=0x03
+ */
 
-		//6
-		//ENABLE A2P FIFO WRITE AND ENABLE AMWEN
-		// AMWEN_ENABLE | A2P_FIFO_WRITE_ENABLE (0x01|0x02)=0x03
-		//BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver
-		//outw(3,devpriv->i_IobaseAddon + 4);
-		//END JK 07.05.04: Comparison between WIN32 and Linux driver
+		/* BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver */
+		/* outw(3,devpriv->i_IobaseAddon + 4); */
+		/* END JK 07.05.04: Comparison between WIN32 and Linux driver */
 
-		//7
-		//initialise end of dma interrupt  AINT_WRITE_COMPL = ENABLE_WRITE_TC_INT(ADDI)
+/*
+ * 7
+ * initialise end of dma interrupt AINT_WRITE_COMPL =
+ * ENABLE_WRITE_TC_INT(ADDI)
+ */
 		/***************************************************/
-		/* A2P FIFO CONFIGURATE, END OF DMA INTERRUPT INIT */
+		/* A2P FIFO CONFIGURATE, END OF DMA intERRUPT INIT */
 		/***************************************************/
 		outl((APCI3120_FIFO_ADVANCE_ON_BYTE_2 |
 				APCI3120_ENABLE_WRITE_TC_INT),
 			devpriv->i_IobaseAmcc + AMCC_OP_REG_INTCSR);
 
-		//BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver
+		/* BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver */
 		/******************************************/
 		/* ENABLE A2P FIFO WRITE AND ENABLE AMWEN */
 		/******************************************/
 		outw(3, devpriv->i_IobaseAddon + 4);
-		//END JK 07.05.04: Comparison between WIN32 and Linux driver
+		/* END JK 07.05.04: Comparison between WIN32 and Linux driver */
 
 		/******************/
 		/* A2P FIFO RESET */
 		/******************/
-		//BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver
+		/* BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver */
 		outl(0x04000000UL,
 			devpriv->i_IobaseAmcc + APCI3120_AMCC_OP_MCSR);
-		//END JK 07.05.04: Comparison between WIN32 and Linux driver
+		/* END JK 07.05.04: Comparison between WIN32 and Linux driver */
 	}
 
 	if ((devpriv->us_UseDma == APCI3120_DISABLE)
 		&& !devpriv->b_AiContinuous) {
-		// set gate 2   to start conversion
+		/*  set gate 2   to start conversion */
 		devpriv->us_OutputRegister =
 			devpriv->us_OutputRegister | APCI3120_ENABLE_TIMER2;
 		outw(devpriv->us_OutputRegister,
@@ -1172,14 +1203,14 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device * dev,
 
 	switch (mode) {
 	case 1:
-		// set gate 0   to start conversion
+		/*  set gate 0   to start conversion */
 		devpriv->us_OutputRegister =
 			devpriv->us_OutputRegister | APCI3120_ENABLE_TIMER0;
 		outw(devpriv->us_OutputRegister,
 			dev->iobase + APCI3120_WR_ADDRESS);
 		break;
 	case 2:
-		// set  gate 0 and gate 1
+		/*  set  gate 0 and gate 1 */
 		devpriv->us_OutputRegister =
 			devpriv->us_OutputRegister | APCI3120_ENABLE_TIMER1;
 		devpriv->us_OutputRegister =
@@ -1196,7 +1227,7 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device * dev,
 
 /*
 +----------------------------------------------------------------------------+
-| 			INTERNAL FUNCTIONS						                 |
+| 			intERNAL FUNCTIONS						                 |
 +----------------------------------------------------------------------------+
 */
 
@@ -1218,7 +1249,7 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3120_Reset(struct comedi_device * dev)
+int i_APCI3120_Reset(struct comedi_device *dev)
 {
 	unsigned int i;
 	unsigned short us_TmpValue;
@@ -1226,47 +1257,49 @@ int i_APCI3120_Reset(struct comedi_device * dev)
 	devpriv->b_AiCyclicAcquisition = APCI3120_DISABLE;
 	devpriv->b_EocEosInterrupt = APCI3120_DISABLE;
 	devpriv->b_InterruptMode = APCI3120_EOC_MODE;
-	devpriv->ui_EocEosConversionTime = 0;	// set eoc eos conv time to 0
+	devpriv->ui_EocEosConversionTime = 0;	/*  set eoc eos conv time to 0 */
 	devpriv->b_OutputMemoryStatus = 0;
 
-	// variables used in timer subdevice
+	/*  variables used in timer subdevice */
 	devpriv->b_Timer2Mode = 0;
 	devpriv->b_Timer2Interrupt = 0;
-	devpriv->b_ExttrigEnable = 0;	// Disable ext trigger
+	devpriv->b_ExttrigEnable = 0;	/*  Disable ext trigger */
 
 	/* Disable all interrupts, watchdog for the anolog output */
 	devpriv->b_ModeSelectRegister = 0;
 	outb(devpriv->b_ModeSelectRegister,
 		dev->iobase + APCI3120_WRITE_MODE_SELECT);
 
-	// Disables all counters, ext trigger and clears PA, PR
+	/*  Disables all counters, ext trigger and clears PA, PR */
 	devpriv->us_OutputRegister = 0;
 	outw(devpriv->us_OutputRegister, dev->iobase + APCI3120_WR_ADDRESS);
 
-	//Code to set the all anolog o/p channel to 0v
-	//8191 is decimal value for zero(0 v)volt in bipolar mode(default)
-	outw(8191 | APCI3120_ANALOG_OP_CHANNEL_1, dev->iobase + APCI3120_ANALOG_OUTPUT_1);	//channel 1
-	outw(8191 | APCI3120_ANALOG_OP_CHANNEL_2, dev->iobase + APCI3120_ANALOG_OUTPUT_1);	//channel 2
-	outw(8191 | APCI3120_ANALOG_OP_CHANNEL_3, dev->iobase + APCI3120_ANALOG_OUTPUT_1);	//channel 3
-	outw(8191 | APCI3120_ANALOG_OP_CHANNEL_4, dev->iobase + APCI3120_ANALOG_OUTPUT_1);	//channel 4
-
-	outw(8191 | APCI3120_ANALOG_OP_CHANNEL_5, dev->iobase + APCI3120_ANALOG_OUTPUT_2);	//channel 5
-	outw(8191 | APCI3120_ANALOG_OP_CHANNEL_6, dev->iobase + APCI3120_ANALOG_OUTPUT_2);	//channel 6
-	outw(8191 | APCI3120_ANALOG_OP_CHANNEL_7, dev->iobase + APCI3120_ANALOG_OUTPUT_2);	//channel 7
-	outw(8191 | APCI3120_ANALOG_OP_CHANNEL_8, dev->iobase + APCI3120_ANALOG_OUTPUT_2);	//channel 8
-
-	//  Reset digital output to L0W
-
-//ES05  outb(0x0,dev->iobase+APCI3120_DIGITAL_OUTPUT);
+/*
+ * Code to set the all anolog o/p channel to 0v 8191 is decimal
+ * value for zero(0 v)volt in bipolar mode(default)
+ */
+	outw(8191 | APCI3120_ANALOG_OP_CHANNEL_1, dev->iobase + APCI3120_ANALOG_OUTPUT_1);	/* channel 1 */
+	outw(8191 | APCI3120_ANALOG_OP_CHANNEL_2, dev->iobase + APCI3120_ANALOG_OUTPUT_1);	/* channel 2 */
+	outw(8191 | APCI3120_ANALOG_OP_CHANNEL_3, dev->iobase + APCI3120_ANALOG_OUTPUT_1);	/* channel 3 */
+	outw(8191 | APCI3120_ANALOG_OP_CHANNEL_4, dev->iobase + APCI3120_ANALOG_OUTPUT_1);	/* channel 4 */
+
+	outw(8191 | APCI3120_ANALOG_OP_CHANNEL_5, dev->iobase + APCI3120_ANALOG_OUTPUT_2);	/* channel 5 */
+	outw(8191 | APCI3120_ANALOG_OP_CHANNEL_6, dev->iobase + APCI3120_ANALOG_OUTPUT_2);	/* channel 6 */
+	outw(8191 | APCI3120_ANALOG_OP_CHANNEL_7, dev->iobase + APCI3120_ANALOG_OUTPUT_2);	/* channel 7 */
+	outw(8191 | APCI3120_ANALOG_OP_CHANNEL_8, dev->iobase + APCI3120_ANALOG_OUTPUT_2);	/* channel 8 */
+
+	/*   Reset digital output to L0W */
+
+/* ES05  outb(0x0,dev->iobase+APCI3120_DIGITAL_OUTPUT); */
 	udelay(10);
 
-	inw(dev->iobase + 0);	//make a dummy read
-	inb(dev->iobase + APCI3120_RESET_FIFO);	// flush FIFO
-	inw(dev->iobase + APCI3120_RD_STATUS);	// flush A/D status register
+	inw(dev->iobase + 0);	/* make a dummy read */
+	inb(dev->iobase + APCI3120_RESET_FIFO);	/*  flush FIFO */
+	inw(dev->iobase + APCI3120_RD_STATUS);	/*  flush A/D status register */
 
-	//code to reset the RAM sequence
+	/* code to reset the RAM sequence */
 	for (i = 0; i < 16; i++) {
-		us_TmpValue = i << 8;	//select the location
+		us_TmpValue = i << 8;	/* select the location */
 		outw(us_TmpValue, dev->iobase + APCI3120_SEQ_RAM_ADDRESS);
 	}
 	return 0;
@@ -1296,10 +1329,10 @@ int i_APCI3120_Reset(struct comedi_device * dev)
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3120_SetupChannelList(struct comedi_device * dev, struct comedi_subdevice * s,
+int i_APCI3120_SetupChannelList(struct comedi_device *dev, struct comedi_subdevice *s,
 	int n_chan, unsigned int *chanlist, char check)
 {
-	unsigned int i;		//, differencial=0, bipolar=0;
+	unsigned int i;		/* , differencial=0, bipolar=0; */
 	unsigned int gain;
 	unsigned short us_TmpValue;
 
@@ -1309,29 +1342,29 @@ int i_APCI3120_SetupChannelList(struct comedi_device * dev, struct comedi_subdev
 			comedi_error(dev, "range/channel list is empty!");
 		return 0;
 	}
-	// All is ok, so we can setup channel/range list
+	/*  All is ok, so we can setup channel/range list */
 	if (check)
 		return 1;
 
-	//Code  to set the PA and PR...Here it set PA to 0..
+	/* Code  to set the PA and PR...Here it set PA to 0.. */
 	devpriv->us_OutputRegister =
 		devpriv->us_OutputRegister & APCI3120_CLEAR_PA_PR;
 	devpriv->us_OutputRegister = ((n_chan - 1) & 0xf) << 8;
 	outw(devpriv->us_OutputRegister, dev->iobase + APCI3120_WR_ADDRESS);
 
 	for (i = 0; i < n_chan; i++) {
-		// store range list to card
-		us_TmpValue = CR_CHAN(chanlist[i]);	// get channel number;
+		/*  store range list to card */
+		us_TmpValue = CR_CHAN(chanlist[i]);	/*  get channel number; */
 
 		if (CR_RANGE(chanlist[i]) < APCI3120_BIPOLAR_RANGES) {
-			us_TmpValue &= ((~APCI3120_UNIPOLAR) & 0xff);	// set bipolar
+			us_TmpValue &= ((~APCI3120_UNIPOLAR) & 0xff);	/*  set bipolar */
 		} else {
-			us_TmpValue |= APCI3120_UNIPOLAR;	// enable unipolar......
+			us_TmpValue |= APCI3120_UNIPOLAR;	/*  enable unipolar...... */
 		}
 
-		gain = CR_RANGE(chanlist[i]);	// get gain number
-		us_TmpValue |= ((gain & 0x03) << 4);	//<<4 for G0 and G1 bit in RAM
-		us_TmpValue |= i << 8;	//To select the RAM LOCATION....
+		gain = CR_RANGE(chanlist[i]);	/*  get gain number */
+		us_TmpValue |= ((gain & 0x03) << 4);	/* <<4 for G0 and G1 bit in RAM */
+		us_TmpValue |= i << 8;	/* To select the RAM LOCATION.... */
 		outw(us_TmpValue, dev->iobase + APCI3120_SEQ_RAM_ADDRESS);
 
 		printk("\n Gain = %i",
@@ -1339,7 +1372,7 @@ int i_APCI3120_SetupChannelList(struct comedi_device * dev, struct comedi_subdev
 		printk("\n Channel = %i", CR_CHAN(chanlist[i]));
 		printk("\n Polarity = %i", us_TmpValue & APCI3120_UNIPOLAR);
 	}
-	return 1;		// we can serve this with scan logic
+	return 1;		/*  we can serve this with scan logic */
 }
 
 /*
@@ -1360,7 +1393,7 @@ int i_APCI3120_SetupChannelList(struct comedi_device * dev, struct comedi_subdev
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3120_ExttrigEnable(struct comedi_device * dev)
+int i_APCI3120_ExttrigEnable(struct comedi_device *dev)
 {
 
 	devpriv->us_OutputRegister |= APCI3120_ENABLE_EXT_TRIGGER;
@@ -1385,7 +1418,7 @@ int i_APCI3120_ExttrigEnable(struct comedi_device * dev)
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3120_ExttrigDisable(struct comedi_device * dev)
+int i_APCI3120_ExttrigDisable(struct comedi_device *dev)
 {
 	devpriv->us_OutputRegister &= ~APCI3120_ENABLE_EXT_TRIGGER;
 	outw(devpriv->us_OutputRegister, dev->iobase + APCI3120_WR_ADDRESS);
@@ -1394,7 +1427,7 @@ int i_APCI3120_ExttrigDisable(struct comedi_device * dev)
 
 /*
 +----------------------------------------------------------------------------+
-|                    INTERRUPT FUNCTIONS		    		                 |
+|                    intERRUPT FUNCTIONS		    		                 |
 +----------------------------------------------------------------------------+
 */
 
@@ -1422,33 +1455,33 @@ int i_APCI3120_ExttrigDisable(struct comedi_device * dev)
 void v_APCI3120_Interrupt(int irq, void *d)
 {
 	struct comedi_device *dev = d;
-	USHORT int_daq;
+	unsigned short int_daq;
 
 	unsigned int int_amcc, ui_Check, i;
-	USHORT us_TmpValue;
-	BYTE b_DummyRead;
+	unsigned short us_TmpValue;
+	unsigned char b_DummyRead;
 
 	struct comedi_subdevice *s = dev->subdevices + 0;
 	ui_Check = 1;
 
-	int_daq = inw(dev->iobase + APCI3120_RD_STATUS) & 0xf000;	// get IRQ reasons
-	int_amcc = inl(devpriv->i_IobaseAmcc + AMCC_OP_REG_INTCSR);	// get AMCC INT register
+	int_daq = inw(dev->iobase + APCI3120_RD_STATUS) & 0xf000;	/*  get IRQ reasons */
+	int_amcc = inl(devpriv->i_IobaseAmcc + AMCC_OP_REG_INTCSR);	/*  get AMCC int register */
 
 	if ((!int_daq) && (!(int_amcc & ANY_S593X_INT))) {
 		comedi_error(dev, "IRQ from unknow source");
 		return;
 	}
 
-	outl(int_amcc | 0x00ff0000, devpriv->i_IobaseAmcc + AMCC_OP_REG_INTCSR);	// shutdown IRQ reasons in AMCC
+	outl(int_amcc | 0x00ff0000, devpriv->i_IobaseAmcc + AMCC_OP_REG_INTCSR);	/*  shutdown IRQ reasons in AMCC */
 
 	int_daq = (int_daq >> 12) & 0xF;
 
 	if (devpriv->b_ExttrigEnable == APCI3120_ENABLE) {
-		//Disable ext trigger
+		/* Disable ext trigger */
 		i_APCI3120_ExttrigDisable(dev);
 		devpriv->b_ExttrigEnable = APCI3120_DISABLE;
 	}
-	//clear the timer 2 interrupt
+	/* clear the timer 2 interrupt */
 	inb(devpriv->i_IobaseAmcc + APCI3120_TIMER_STATUS_REGISTER);
 
 	if (int_amcc & MASTER_ABORT_INT)
@@ -1456,19 +1489,19 @@ void v_APCI3120_Interrupt(int irq, void *d)
 	if (int_amcc & TARGET_ABORT_INT)
 		comedi_error(dev, "AMCC IRQ - TARGET DMA ABORT!");
 
-	// Ckeck if EOC interrupt
+	/*  Ckeck if EOC interrupt */
 	if (((int_daq & 0x8) == 0)
 		&& (devpriv->b_InterruptMode == APCI3120_EOC_MODE)) {
 		if (devpriv->b_EocEosInterrupt == APCI3120_ENABLE) {
 
-			// Read the AI Value
+			/*  Read the AI Value */
 
 			devpriv->ui_AiReadData[0] =
-				(UINT) inw(devpriv->iobase + 0);
+				(unsigned int) inw(devpriv->iobase + 0);
 			devpriv->b_EocEosInterrupt = APCI3120_DISABLE;
-			send_sig(SIGIO, devpriv->tsk_Current, 0);	// send signal to the sample
+			send_sig(SIGIO, devpriv->tsk_Current, 0);	/*  send signal to the sample */
 		} else {
-			//Disable EOC Interrupt
+			/* Disable EOC Interrupt */
 			devpriv->b_ModeSelectRegister =
 				devpriv->
 				b_ModeSelectRegister & APCI3120_DISABLE_EOC_INT;
@@ -1478,10 +1511,10 @@ void v_APCI3120_Interrupt(int irq, void *d)
 		}
 	}
 
-	// Check If EOS interrupt
+	/*  Check If EOS interrupt */
 	if ((int_daq & 0x2) && (devpriv->b_InterruptMode == APCI3120_EOS_MODE)) {
 
-		if (devpriv->b_EocEosInterrupt == APCI3120_ENABLE)	// enable this in without DMA ???
+		if (devpriv->b_EocEosInterrupt == APCI3120_ENABLE)	/*  enable this in without DMA ??? */
 		{
 
 			if (devpriv->b_AiCyclicAcquisition == APCI3120_ENABLE) {
@@ -1501,12 +1534,12 @@ void v_APCI3120_Interrupt(int irq, void *d)
 					i++) {
 					us_TmpValue = inw(devpriv->iobase + 0);
 					devpriv->ui_AiReadData[i] =
-						(UINT) us_TmpValue;
+						(unsigned int) us_TmpValue;
 				}
 				devpriv->b_EocEosInterrupt = APCI3120_DISABLE;
 				devpriv->b_InterruptMode = APCI3120_EOC_MODE;
 
-				send_sig(SIGIO, devpriv->tsk_Current, 0);	// send signal to the sample
+				send_sig(SIGIO, devpriv->tsk_Current, 0);	/*  send signal to the sample */
 
 			}
 
@@ -1516,12 +1549,12 @@ void v_APCI3120_Interrupt(int irq, void *d)
 				b_ModeSelectRegister & APCI3120_DISABLE_EOS_INT;
 			outb(devpriv->b_ModeSelectRegister,
 				dev->iobase + APCI3120_WRITE_MODE_SELECT);
-			devpriv->b_EocEosInterrupt = APCI3120_DISABLE;	//Default settings
+			devpriv->b_EocEosInterrupt = APCI3120_DISABLE;	/* Default settings */
 			devpriv->b_InterruptMode = APCI3120_EOC_MODE;
 		}
 
 	}
-	//Timer2 interrupt
+	/* Timer2 interrupt */
 	if (int_daq & 0x1) {
 
 		switch (devpriv->b_Timer2Mode) {
@@ -1534,18 +1567,18 @@ void v_APCI3120_Interrupt(int irq, void *d)
 			outb(devpriv->b_ModeSelectRegister,
 				dev->iobase + APCI3120_WRITE_MODE_SELECT);
 
-			// stop timer 2
+			/*  stop timer 2 */
 			devpriv->us_OutputRegister =
 				devpriv->
 				us_OutputRegister & APCI3120_DISABLE_ALL_TIMER;
 			outw(devpriv->us_OutputRegister,
 				dev->iobase + APCI3120_WR_ADDRESS);
 
-			//stop timer 0 and timer 1
+			/* stop timer 0 and timer 1 */
 			i_APCI3120_StopCyclicAcquisition(dev, s);
 			devpriv->b_AiCyclicAcquisition = APCI3120_DISABLE;
 
-			//UPDATE-0.7.57->0.7.68comedi_done(dev,s);
+			/* UPDATE-0.7.57->0.7.68comedi_done(dev,s); */
 			s->async->events |= COMEDI_CB_EOA;
 			comedi_event(dev, s);
 
@@ -1553,19 +1586,19 @@ void v_APCI3120_Interrupt(int irq, void *d)
 
 		case APCI3120_TIMER:
 
-			//Send a signal to from kernel to user space
+			/* Send a signal to from kernel to user space */
 			send_sig(SIGIO, devpriv->tsk_Current, 0);
 			break;
 
 		case APCI3120_WATCHDOG:
 
-			//Send a signal to from kernel to user space
+			/* Send a signal to from kernel to user space */
 			send_sig(SIGIO, devpriv->tsk_Current, 0);
 			break;
 
 		default:
 
-			// disable Timer Interrupt
+			/*  disable Timer Interrupt */
 
 			devpriv->b_ModeSelectRegister =
 				devpriv->
@@ -1585,7 +1618,7 @@ void v_APCI3120_Interrupt(int irq, void *d)
 		if (devpriv->b_AiCyclicAcquisition == APCI3120_ENABLE) {
 
 			/****************************/
-			/* Clear Timer Write TC INT */
+			/* Clear Timer Write TC int */
 			/****************************/
 
 			outl(APCI3120_CLEAR_WRITE_TC_INT,
@@ -1596,7 +1629,7 @@ void v_APCI3120_Interrupt(int irq, void *d)
 			/* Clears the timer status register */
 			/************************************/
 			inw(dev->iobase + APCI3120_TIMER_STATUS_REGISTER);
-			v_APCI3120_InterruptDma(irq, d);	// do some data transfer
+			v_APCI3120_InterruptDma(irq, d);	/*  do some data transfer */
 		} else {
 			/* Stops the Timer */
 			outw(devpriv->
@@ -1630,32 +1663,8 @@ void v_APCI3120_Interrupt(int irq, void *d)
 +----------------------------------------------------------------------------+
 */
 
-/*
- * int i_APCI3120_InterruptHandleEos(struct comedi_device *dev)
-{
-       int n_chan,i;
-       short *data;
-       struct comedi_subdevice *s=dev->subdevices+0;
-       struct comedi_async *async = s->async;
-       data=async->data+async->buf_int_ptr;
-        n_chan=devpriv->ui_AiNbrofChannels;
-
-       for(i=0;i<n_chan;i++)
-         {
-           data[i]=inw(dev->iobase+0);
-         }
-       async->buf_int_count+=n_chan*sizeof(short);
-       async->buf_int_ptr+=n_chan*sizeof(short);
-       comedi_eos(dev,s);
-       if (s->async->buf_int_ptr>=s->async->data_len) //  for buffer rool over
-		         {
-*//* buffer rollover */
-/*	        s->async->buf_int_ptr=0;
-		comedi_eobuf(dev,s);
-         }
- 	return 0;
-}*/
-int i_APCI3120_InterruptHandleEos(struct comedi_device * dev)
+
+int i_APCI3120_InterruptHandleEos(struct comedi_device *dev)
 {
 	int n_chan, i;
 	struct comedi_subdevice *s = dev->subdevices + 0;
@@ -1704,7 +1713,7 @@ void v_APCI3120_InterruptDma(int irq, void *d)
 	unsigned int next_dma_buf, samplesinbuf;
 	unsigned long low_word, high_word, var;
 
-	UINT ui_Tmp;
+	unsigned int ui_Tmp;
 	samplesinbuf =
 		devpriv->ui_DmaBufferUsesize[devpriv->ui_DmaActualBuffer] -
 		inl(devpriv->i_IobaseAmcc + AMCC_OP_REG_MWTC);
@@ -1720,20 +1729,20 @@ void v_APCI3120_InterruptDma(int irq, void *d)
 
 		return;
 	}
-	samplesinbuf = samplesinbuf >> 1;	// number of received samples
+	samplesinbuf = samplesinbuf >> 1;	/*  number of received samples */
 	if (devpriv->b_DmaDoubleBuffer) {
-		// switch DMA buffers if is used double buffering
+		/*  switch DMA buffers if is used double buffering */
 		next_dma_buf = 1 - devpriv->ui_DmaActualBuffer;
 
 		ui_Tmp = AGCSTS_TC_ENABLE | AGCSTS_RESET_A2P_FIFO;
 		outl(ui_Tmp, devpriv->i_IobaseAddon + AMCC_OP_REG_AGCSTS);
 
-		// changed  since 16 bit interface for add on
+		/*  changed  since 16 bit interface for add on */
 		outw(APCI3120_ADD_ON_AGCSTS_LOW, devpriv->i_IobaseAddon + 0);
 		outw(APCI3120_ENABLE_TRANSFER_ADD_ON_LOW,
 			devpriv->i_IobaseAddon + 2);
 		outw(APCI3120_ADD_ON_AGCSTS_HIGH, devpriv->i_IobaseAddon + 0);
-		outw(APCI3120_ENABLE_TRANSFER_ADD_ON_HIGH, devpriv->i_IobaseAddon + 2);	// 0x1000 is out putted in windows driver
+		outw(APCI3120_ENABLE_TRANSFER_ADD_ON_HIGH, devpriv->i_IobaseAddon + 2);	/*  0x1000 is out putted in windows driver */
 
 		var = devpriv->ul_DmaBufferHw[next_dma_buf];
 		low_word = var & 0xffff;
@@ -1761,54 +1770,18 @@ void v_APCI3120_InterruptDma(int irq, void *d)
 		outw(APCI3120_ADD_ON_MWTC_HIGH, devpriv->i_IobaseAddon + 0);
 		outw(high_word, devpriv->i_IobaseAddon + 2);
 
-		// To configure A2P FIFO
-		// ENABLE A2P FIFO WRITE AND ENABLE AMWEN
-		// AMWEN_ENABLE | A2P_FIFO_WRITE_ENABLE (0x01|0x02)=0x03
+/*
+ * To configure A2P FIFO
+ * ENABLE A2P FIFO WRITE AND ENABLE AMWEN
+ * AMWEN_ENABLE | A2P_FIFO_WRITE_ENABLE (0x01|0x02)=0x03
+ */
 		outw(3, devpriv->i_IobaseAddon + 4);
-		//initialise end of dma interrupt  AINT_WRITE_COMPL = ENABLE_WRITE_TC_INT(ADDI)
+		/* initialise end of dma interrupt  AINT_WRITE_COMPL = ENABLE_WRITE_TC_INT(ADDI) */
 		outl((APCI3120_FIFO_ADVANCE_ON_BYTE_2 |
 				APCI3120_ENABLE_WRITE_TC_INT),
 			devpriv->i_IobaseAmcc + AMCC_OP_REG_INTCSR);
 
 	}
-/*UPDATE-0.7.57->0.7.68
-	ptr=(short *)devpriv->ul_DmaBufferVirtual[devpriv->ui_DmaActualBuffer];
-
-
-	// if there is not enough space left in the buffer to copy all data contained in the DMABufferVirtual
-	if(s->async->buf_int_ptr+samplesinbuf*sizeof(short)>=devpriv->ui_AiDataLength)
-	{
-		m=(devpriv->ui_AiDataLength-s->async->buf_int_ptr)/sizeof(short);
-		v_APCI3120_InterruptDmaMoveBlock16bit(dev,s,(void *)ptr,((void *)(devpriv->AiData))+s->async->buf_int_ptr,m);
-		s->async->buf_int_count+=m*sizeof(short);
-		ptr+=m*sizeof(short);
-                samplesinbuf-=m;
-		s->async->buf_int_ptr=0;
-		comedi_eobuf(dev,s);
-	}
-
-	if (samplesinbuf)
-	{
-	        v_APCI3120_InterruptDmaMoveBlock16bit(dev,s,(void *)ptr,((void *)(devpriv->AiData))+s->async->buf_int_ptr,samplesinbuf);
-
-		s->async->buf_int_count+=samplesinbuf*sizeof(short);
-		s->async->buf_int_ptr+=samplesinbuf*sizeof(short);
-		if (!(devpriv->ui_AiFlags & TRIG_WAKE_EOS))
-		{
-			comedi_bufcheck(dev,s);
-                }
-	}
-	if (!devpriv->b_AiContinuous)
-	if ( devpriv->ui_AiActualScan>=devpriv->ui_AiNbrofScans )
-	{
-	    // all data sampled
-	    i_APCI3120_StopCyclicAcquisition(dev,s);
-            devpriv->b_AiCyclicAcquisition=APCI3120_DISABLE;
-	    //DPRINTK("\n Single DMA completed..\n");
-		comedi_done(dev,s);
-            	return;
-	}
-*/
 	if (samplesinbuf) {
 		v_APCI3120_InterruptDmaMoveBlock16bit(dev, s,
 			devpriv->ul_DmaBufferVirtual[devpriv->
@@ -1821,7 +1794,7 @@ void v_APCI3120_InterruptDma(int irq, void *d)
 	}
 	if (!devpriv->b_AiContinuous)
 		if (devpriv->ui_AiActualScan >= devpriv->ui_AiNbrofScans) {
-			// all data sampled
+			/*  all data sampled */
 			i_APCI3120_StopCyclicAcquisition(dev, s);
 			devpriv->b_AiCyclicAcquisition = APCI3120_DISABLE;
 			s->async->events |= COMEDI_CB_EOA;
@@ -1829,22 +1802,26 @@ void v_APCI3120_InterruptDma(int irq, void *d)
 			return;
 		}
 
-	if (devpriv->b_DmaDoubleBuffer) {	// switch dma buffers
+	if (devpriv->b_DmaDoubleBuffer) {	/*  switch dma buffers */
 		devpriv->ui_DmaActualBuffer = 1 - devpriv->ui_DmaActualBuffer;
 	} else {
-		// restart DMA if is not used double buffering
-		//ADDED REINITIALISE THE DMA
+/*
+ * restart DMA if is not used double buffering
+ * ADDED REINITIALISE THE DMA
+ */
 		ui_Tmp = AGCSTS_TC_ENABLE | AGCSTS_RESET_A2P_FIFO;
 		outl(ui_Tmp, devpriv->i_IobaseAddon + AMCC_OP_REG_AGCSTS);
 
-		// changed  since 16 bit interface for add on
+		/*  changed  since 16 bit interface for add on */
 		outw(APCI3120_ADD_ON_AGCSTS_LOW, devpriv->i_IobaseAddon + 0);
 		outw(APCI3120_ENABLE_TRANSFER_ADD_ON_LOW,
 			devpriv->i_IobaseAddon + 2);
 		outw(APCI3120_ADD_ON_AGCSTS_HIGH, devpriv->i_IobaseAddon + 0);
-		outw(APCI3120_ENABLE_TRANSFER_ADD_ON_HIGH, devpriv->i_IobaseAddon + 2);	//
-		// A2P FIFO MANAGEMENT
-		// A2P fifo reset  & transfer control enable
+		outw(APCI3120_ENABLE_TRANSFER_ADD_ON_HIGH, devpriv->i_IobaseAddon + 2);	/*  */
+/*
+ * A2P FIFO MANAGEMENT
+ * A2P fifo reset & transfer control enable
+ */
 		outl(APCI3120_A2P_FIFO_MANAGEMENT,
 			devpriv->i_IobaseAmcc + AMCC_OP_REG_MCSR);
 
@@ -1858,7 +1835,7 @@ void v_APCI3120_InterruptDma(int irq, void *d)
 		outw(high_word, devpriv->i_IobaseAddon + 2);
 
 		var = devpriv->ui_DmaBufferUsesize[0];
-		low_word = var & 0xffff;	//changed
+		low_word = var & 0xffff;	/* changed */
 		var = devpriv->ui_DmaBufferUsesize[0];
 		high_word = var / 65536;
 		outw(APCI3120_ADD_ON_MWTC_LOW, devpriv->i_IobaseAddon + 0);
@@ -1866,11 +1843,13 @@ void v_APCI3120_InterruptDma(int irq, void *d)
 		outw(APCI3120_ADD_ON_MWTC_HIGH, devpriv->i_IobaseAddon + 0);
 		outw(high_word, devpriv->i_IobaseAddon + 2);
 
-		// To configure A2P FIFO
-		//ENABLE A2P FIFO WRITE AND ENABLE AMWEN
-		// AMWEN_ENABLE | A2P_FIFO_WRITE_ENABLE (0x01|0x02)=0x03
+/*
+ * To configure A2P FIFO
+ * ENABLE A2P FIFO WRITE AND ENABLE AMWEN
+ * AMWEN_ENABLE | A2P_FIFO_WRITE_ENABLE (0x01|0x02)=0x03
+ */
 		outw(3, devpriv->i_IobaseAddon + 4);
-		//initialise end of dma interrupt  AINT_WRITE_COMPL = ENABLE_WRITE_TC_INT(ADDI)
+		/* initialise end of dma interrupt  AINT_WRITE_COMPL = ENABLE_WRITE_TC_INT(ADDI) */
 		outl((APCI3120_FIFO_ADVANCE_ON_BYTE_2 |
 				APCI3120_ENABLE_WRITE_TC_INT),
 			devpriv->i_IobaseAmcc + AMCC_OP_REG_INTCSR);
@@ -1897,37 +1876,8 @@ void v_APCI3120_InterruptDma(int irq, void *d)
 +----------------------------------------------------------------------------+
 */
 
-/*void v_APCI3120_InterruptDmaMoveBlock16bit(struct comedi_device *dev,struct comedi_subdevice *s,short *dma,short *data,int n)
-{
-	int i,j,m;
-
-	j=s->async->cur_chan;
-	m=devpriv->ui_AiActualScanPosition;
-        for(i=0;i<n;i++)
-	{
-		*data=*dma;
-   		data++; dma++;
-		j++;
-		if(j>=devpriv->ui_AiNbrofChannels)
-		{
-			m+=j;
-			j=0;
-			if(m>=devpriv->ui_AiScanLength)
-			{
-				m=0;
-			        devpriv->ui_AiActualScan++;
-				if (devpriv->ui_AiFlags & TRIG_WAKE_EOS)
-;//UPDATE-0.7.57->0.7.68					comedi_eos(dev,s);
-			}
-		}
-	}
-        devpriv->ui_AiActualScanPosition=m;
-	s->async->cur_chan=j;
-
-}
-*/
-void v_APCI3120_InterruptDmaMoveBlock16bit(struct comedi_device * dev,
-	struct comedi_subdevice * s, short * dma_buffer, unsigned int num_samples)
+void v_APCI3120_InterruptDmaMoveBlock16bit(struct comedi_device *dev,
+	struct comedi_subdevice *s, short *dma_buffer, unsigned int num_samples)
 {
 	devpriv->ui_AiActualScan +=
 		(s->async->cur_chan + num_samples) / devpriv->ui_AiScanLength;
@@ -1968,71 +1918,77 @@ void v_APCI3120_InterruptDmaMoveBlock16bit(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3120_InsnConfigTimer(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI3120_InsnConfigTimer(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 
-	UINT ui_Timervalue2;
-	USHORT us_TmpValue;
-	BYTE b_Tmp;
+	unsigned int ui_Timervalue2;
+	unsigned short us_TmpValue;
+	unsigned char b_Tmp;
 
 	if (!data[1])
 		comedi_error(dev, "config:No timer constant !");
 
-	devpriv->b_Timer2Interrupt = (BYTE) data[2];	// save info whether to enable or disable interrupt
+	devpriv->b_Timer2Interrupt = (unsigned char) data[2];	/*  save info whether to enable or disable interrupt */
 
-	ui_Timervalue2 = data[1] / 1000;	// convert nano seconds  to u seconds
+	ui_Timervalue2 = data[1] / 1000;	/*  convert nano seconds  to u seconds */
 
-	//this_board->i_hwdrv_InsnConfigTimer(dev, ui_Timervalue2,(BYTE)data[0]);
-	us_TmpValue = (USHORT) inw(devpriv->iobase + APCI3120_RD_STATUS);
+	/* this_board->i_hwdrv_InsnConfigTimer(dev, ui_Timervalue2,(unsigned char)data[0]); */
+	us_TmpValue = (unsigned short) inw(devpriv->iobase + APCI3120_RD_STATUS);
 
-	//EL250804: Testing if board APCI3120 have the new Quartz or if it is an APCI3001
-	// and calculate the time value to set in the timer
+/*
+ * EL250804: Testing if board APCI3120 have the new Quartz or if it
+ * is an APCI3001 and calculate the time value to set in the timer
+ */
 	if ((us_TmpValue & 0x00B0) == 0x00B0
 		|| !strcmp(this_board->pc_DriverName, "apci3001")) {
-		//Calculate the time value to set in the timer
+		/* Calculate the time value to set in the timer */
 		ui_Timervalue2 = ui_Timervalue2 / 50;
 	} else {
-		//Calculate the time value to set in the timer
+		/* Calculate the time value to set in the timer */
 		ui_Timervalue2 = ui_Timervalue2 / 70;
 	}
 
-	//Reset gate 2 of Timer 2 to disable it (Set Bit D14 to 0)
+	/* Reset gate 2 of Timer 2 to disable it (Set Bit D14 to 0) */
 	devpriv->us_OutputRegister =
 		devpriv->us_OutputRegister & APCI3120_DISABLE_TIMER2;
 	outw(devpriv->us_OutputRegister, devpriv->iobase + APCI3120_WR_ADDRESS);
 
-	// Disable TIMER Interrupt
+	/*  Disable TIMER Interrupt */
 	devpriv->b_ModeSelectRegister =
 		devpriv->
 		b_ModeSelectRegister & APCI3120_DISABLE_TIMER_INT & 0xEF;
 
-	// Disable Eoc and Eos Interrupts
+	/*  Disable Eoc and Eos Interrupts */
 	devpriv->b_ModeSelectRegister =
 		devpriv->
 		b_ModeSelectRegister & APCI3120_DISABLE_EOC_INT &
 		APCI3120_DISABLE_EOS_INT;
 	outb(devpriv->b_ModeSelectRegister,
 		devpriv->iobase + APCI3120_WRITE_MODE_SELECT);
-	if (data[0] == APCI3120_TIMER)	//initialize timer
+	if (data[0] == APCI3120_TIMER)	/* initialize timer */
 	{
+		/* devpriv->b_ModeSelectRegister=devpriv->b_ModeSelectRegister |
+		 * APCI3120_ENABLE_TIMER_INT; */
 
-		//devpriv->b_ModeSelectRegister=devpriv->b_ModeSelectRegister| APCI3120_ENABLE_TIMER_INT ;
-		//outb(devpriv->b_ModeSelectRegister,devpriv->iobase+APCI3120_WRITE_MODE_SELECT);
+		/* outb(devpriv->b_ModeSelectRegister,devpriv->iobase+APCI3120_WRITE_MODE_SELECT); */
 
-		//Set the Timer 2 in mode 2(Timer)
+		/* Set the Timer 2 in mode 2(Timer) */
 		devpriv->b_TimerSelectMode =
 			(devpriv->
 			b_TimerSelectMode & 0x0F) | APCI3120_TIMER_2_MODE_2;
 		outb(devpriv->b_TimerSelectMode,
 			devpriv->iobase + APCI3120_TIMER_CRT1);
 
-		//Configure the timer 2 for writing the LOW WORD of timer is Delay value
-		//You must make a b_tmp variable with DigitalOutPutRegister because at Address_1+APCI3120_TIMER_CRT0
-		//you can set the digital output and configure the timer 2,and if you don't make this, digital output
-		//are erase (Set to 0)
-
-		//Writing LOW WORD
+/*
+ * Configure the timer 2 for writing the LOW unsigned short of timer
+ * is Delay value You must make a b_tmp variable with
+ * DigitalOutPutRegister because at Address_1+APCI3120_TIMER_CRT0
+ * you can set the digital output and configure the timer 2,and if
+ * you don't make this, digital output are erase (Set to 0)
+ */
+
+		/* Writing LOW unsigned short */
 		b_Tmp = ((devpriv->
 				b_DigitalOutputRegister) & 0xF0) |
 			APCI3120_SELECT_TIMER_2_LOW_WORD;
@@ -2040,20 +1996,20 @@ int i_APCI3120_InsnConfigTimer(struct comedi_device * dev, struct comedi_subdevi
 		outw(LOWORD(ui_Timervalue2),
 			devpriv->iobase + APCI3120_TIMER_VALUE);
 
-		//Writing HIGH WORD
+		/* Writing HIGH unsigned short */
 		b_Tmp = ((devpriv->
 				b_DigitalOutputRegister) & 0xF0) |
 			APCI3120_SELECT_TIMER_2_HIGH_WORD;
 		outb(b_Tmp, devpriv->iobase + APCI3120_TIMER_CRT0);
 		outw(HIWORD(ui_Timervalue2),
 			devpriv->iobase + APCI3120_TIMER_VALUE);
-		// timer2 in Timer mode enabled
+		/*  timer2 in Timer mode enabled */
 		devpriv->b_Timer2Mode = APCI3120_TIMER;
 
-	} else			// Initialize Watch dog
+	} else			/*  Initialize Watch dog */
 	{
 
-		//Set the Timer 2 in mode 5(Watchdog)
+		/* Set the Timer 2 in mode 5(Watchdog) */
 
 		devpriv->b_TimerSelectMode =
 			(devpriv->
@@ -2061,12 +2017,15 @@ int i_APCI3120_InsnConfigTimer(struct comedi_device * dev, struct comedi_subdevi
 		outb(devpriv->b_TimerSelectMode,
 			devpriv->iobase + APCI3120_TIMER_CRT1);
 
-		//Configure the timer 2 for writing the LOW WORD of timer is Delay value
-		//You must make a b_tmp variable with DigitalOutPutRegister because at Address_1+APCI3120_TIMER_CRT0
-		//you can set the digital output and configure the timer 2,and if you don't make this, digital output
-		//are erase (Set to 0)
-
-		//Writing LOW WORD
+/*
+ * Configure the timer 2 for writing the LOW unsigned short of timer
+ * is Delay value You must make a b_tmp variable with
+ * DigitalOutPutRegister because at Address_1+APCI3120_TIMER_CRT0
+ * you can set the digital output and configure the timer 2,and if
+ * you don't make this, digital output are erase (Set to 0)
+ */
+
+		/* Writing LOW unsigned short */
 		b_Tmp = ((devpriv->
 				b_DigitalOutputRegister) & 0xF0) |
 			APCI3120_SELECT_TIMER_2_LOW_WORD;
@@ -2074,7 +2033,7 @@ int i_APCI3120_InsnConfigTimer(struct comedi_device * dev, struct comedi_subdevi
 		outw(LOWORD(ui_Timervalue2),
 			devpriv->iobase + APCI3120_TIMER_VALUE);
 
-		//Writing HIGH WORD
+		/* Writing HIGH unsigned short */
 		b_Tmp = ((devpriv->
 				b_DigitalOutputRegister) & 0xF0) |
 			APCI3120_SELECT_TIMER_2_HIGH_WORD;
@@ -2082,7 +2041,7 @@ int i_APCI3120_InsnConfigTimer(struct comedi_device * dev, struct comedi_subdevi
 
 		outw(HIWORD(ui_Timervalue2),
 			devpriv->iobase + APCI3120_TIMER_VALUE);
-		//watchdog enabled
+		/* watchdog enabled */
 		devpriv->b_Timer2Mode = APCI3120_WATCHDOG;
 
 	}
@@ -2119,13 +2078,13 @@ int i_APCI3120_InsnConfigTimer(struct comedi_device * dev, struct comedi_subdevi
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3120_InsnWriteTimer(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI3120_InsnWriteTimer(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 
-	UINT ui_Timervalue2 = 0;
-	USHORT us_TmpValue;
-	BYTE b_Tmp;
+	unsigned int ui_Timervalue2 = 0;
+	unsigned short us_TmpValue;
+	unsigned char b_Tmp;
 
 	if ((devpriv->b_Timer2Mode != APCI3120_WATCHDOG)
 		&& (devpriv->b_Timer2Mode != APCI3120_TIMER)) {
@@ -2133,7 +2092,7 @@ int i_APCI3120_InsnWriteTimer(struct comedi_device * dev, struct comedi_subdevic
 		return -EINVAL;
 	}
 
-	if (data[0] == 2)	// write new value
+	if (data[0] == 2)	/*  write new value */
 	{
 		if (devpriv->b_Timer2Mode != APCI3120_TIMER) {
 			comedi_error(dev,
@@ -2147,35 +2106,35 @@ int i_APCI3120_InsnWriteTimer(struct comedi_device * dev, struct comedi_subdevic
 			ui_Timervalue2 = 0;
 	}
 
-	//this_board->i_hwdrv_InsnWriteTimer(dev,data[0],ui_Timervalue2);
+	/* this_board->i_hwdrv_InsnWriteTimer(dev,data[0],ui_Timervalue2); */
 
 	switch (data[0]) {
 	case APCI3120_START:
 
-		// Reset FC_TIMER BIT
+		/*  Reset FC_TIMER BIT */
 		inb(devpriv->iobase + APCI3120_TIMER_STATUS_REGISTER);
-		if (devpriv->b_Timer2Mode == APCI3120_TIMER)	//start timer
+		if (devpriv->b_Timer2Mode == APCI3120_TIMER)	/* start timer */
 		{
-			//Enable Timer
+			/* Enable Timer */
 			devpriv->b_ModeSelectRegister =
 				devpriv->b_ModeSelectRegister & 0x0B;
-		} else		//start watch dog
+		} else		/* start watch dog */
 		{
-			//Enable WatchDog
+			/* Enable WatchDog */
 			devpriv->b_ModeSelectRegister =
 				(devpriv->
 				b_ModeSelectRegister & 0x0B) |
 				APCI3120_ENABLE_WATCHDOG;
 		}
 
-		//enable disable interrupt
+		/* enable disable interrupt */
 		if ((devpriv->b_Timer2Interrupt) == APCI3120_ENABLE) {
 
 			devpriv->b_ModeSelectRegister =
 				devpriv->
 				b_ModeSelectRegister |
 				APCI3120_ENABLE_TIMER_INT;
-			// save the task structure to pass info to user
+			/*  save the task structure to pass info to user */
 			devpriv->tsk_Current = current;
 		} else {
 
@@ -2187,9 +2146,9 @@ int i_APCI3120_InsnWriteTimer(struct comedi_device * dev, struct comedi_subdevic
 		outb(devpriv->b_ModeSelectRegister,
 			devpriv->iobase + APCI3120_WRITE_MODE_SELECT);
 
-		if (devpriv->b_Timer2Mode == APCI3120_TIMER)	//start timer
+		if (devpriv->b_Timer2Mode == APCI3120_TIMER)	/* start timer */
 		{
-			//For Timer mode is  Gate2 must be activated   **timer started
+			/* For Timer mode is  Gate2 must be activated   **timer started */
 			devpriv->us_OutputRegister =
 				devpriv->
 				us_OutputRegister | APCI3120_ENABLE_TIMER2;
@@ -2201,62 +2160,64 @@ int i_APCI3120_InsnWriteTimer(struct comedi_device * dev, struct comedi_subdevic
 
 	case APCI3120_STOP:
 		if (devpriv->b_Timer2Mode == APCI3120_TIMER) {
-			//Disable timer
+			/* Disable timer */
 			devpriv->b_ModeSelectRegister =
 				devpriv->
 				b_ModeSelectRegister &
 				APCI3120_DISABLE_TIMER_COUNTER;
 		} else {
-			//Disable WatchDog
+			/* Disable WatchDog */
 			devpriv->b_ModeSelectRegister =
 				devpriv->
 				b_ModeSelectRegister &
 				APCI3120_DISABLE_WATCHDOG;
 		}
-		// Disable timer interrupt
+		/*  Disable timer interrupt */
 		devpriv->b_ModeSelectRegister =
 			devpriv->
 			b_ModeSelectRegister & APCI3120_DISABLE_TIMER_INT;
 
-		// Write above states  to register
+		/*  Write above states  to register */
 		outb(devpriv->b_ModeSelectRegister,
 			devpriv->iobase + APCI3120_WRITE_MODE_SELECT);
 
-		// Reset Gate 2
+		/*  Reset Gate 2 */
 		devpriv->us_OutputRegister =
 			devpriv->us_OutputRegister & APCI3120_DISABLE_TIMER_INT;
 		outw(devpriv->us_OutputRegister,
 			devpriv->iobase + APCI3120_WR_ADDRESS);
 
-		// Reset FC_TIMER BIT
+		/*  Reset FC_TIMER BIT */
 		inb(devpriv->iobase + APCI3120_TIMER_STATUS_REGISTER);
 
-		// Disable timer
-		//devpriv->b_Timer2Mode=APCI3120_DISABLE;
+		/* Disable timer */
+		/* devpriv->b_Timer2Mode=APCI3120_DISABLE;  */
 
 		break;
 
-	case 2:		//write new value to Timer
+	case 2:		/* write new value to Timer */
 		if (devpriv->b_Timer2Mode != APCI3120_TIMER) {
 			comedi_error(dev,
 				"write :timer2  not configured  in TIMER MODE");
 			return -EINVAL;
 		}
-		// ui_Timervalue2=data[1]; // passed as argument
+		/*  ui_Timervalue2=data[1]; // passed as argument */
 		us_TmpValue =
-			(USHORT) inw(devpriv->iobase + APCI3120_RD_STATUS);
+			(unsigned short) inw(devpriv->iobase + APCI3120_RD_STATUS);
 
-		//EL250804: Testing if board APCI3120 have the new Quartz or if it is an APCI3001
-		// and calculate the time value to set in the timer
+/*
+ * EL250804: Testing if board APCI3120 have the new Quartz or if it
+ * is an APCI3001 and calculate the time value to set in the timer
+ */
 		if ((us_TmpValue & 0x00B0) == 0x00B0
 			|| !strcmp(this_board->pc_DriverName, "apci3001")) {
-			//Calculate the time value to set in the timer
+			/* Calculate the time value to set in the timer */
 			ui_Timervalue2 = ui_Timervalue2 / 50;
 		} else {
-			//Calculate the time value to set in the timer
+			/* Calculate the time value to set in the timer */
 			ui_Timervalue2 = ui_Timervalue2 / 70;
 		}
-		//Writing LOW WORD
+		/* Writing LOW unsigned short */
 		b_Tmp = ((devpriv->
 				b_DigitalOutputRegister) & 0xF0) |
 			APCI3120_SELECT_TIMER_2_LOW_WORD;
@@ -2265,7 +2226,7 @@ int i_APCI3120_InsnWriteTimer(struct comedi_device * dev, struct comedi_subdevic
 		outw(LOWORD(ui_Timervalue2),
 			devpriv->iobase + APCI3120_TIMER_VALUE);
 
-		//Writing HIGH WORD
+		/* Writing HIGH unsigned short */
 		b_Tmp = ((devpriv->
 				b_DigitalOutputRegister) & 0xF0) |
 			APCI3120_SELECT_TIMER_2_HIGH_WORD;
@@ -2276,7 +2237,7 @@ int i_APCI3120_InsnWriteTimer(struct comedi_device * dev, struct comedi_subdevic
 
 		break;
 	default:
-		return -EINVAL;	// Not a valid input
+		return -EINVAL;	/*  Not a valid input */
 	}
 
 	return insn->n;
@@ -2305,21 +2266,21 @@ int i_APCI3120_InsnWriteTimer(struct comedi_device * dev, struct comedi_subdevic
 |                    													     |
 +----------------------------------------------------------------------------+
 */
-int i_APCI3120_InsnReadTimer(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI3120_InsnReadTimer(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	BYTE b_Tmp;
-	USHORT us_TmpValue, us_TmpValue_2, us_StatusValue;
+	unsigned char b_Tmp;
+	unsigned short us_TmpValue, us_TmpValue_2, us_StatusValue;
 
 	if ((devpriv->b_Timer2Mode != APCI3120_WATCHDOG)
 		&& (devpriv->b_Timer2Mode != APCI3120_TIMER)) {
 		comedi_error(dev, "\nread:timer2  not configured ");
 	}
 
-	//this_board->i_hwdrv_InsnReadTimer(dev,data);
+	/* this_board->i_hwdrv_InsnReadTimer(dev,data); */
 	if (devpriv->b_Timer2Mode == APCI3120_TIMER) {
 
-		//Read the LOW WORD of Timer 2 register
+		/* Read the LOW unsigned short of Timer 2 register */
 		b_Tmp = ((devpriv->
 				b_DigitalOutputRegister) & 0xF0) |
 			APCI3120_SELECT_TIMER_2_LOW_WORD;
@@ -2327,7 +2288,7 @@ int i_APCI3120_InsnReadTimer(struct comedi_device * dev, struct comedi_subdevice
 
 		us_TmpValue = inw(devpriv->iobase + APCI3120_TIMER_VALUE);
 
-		//Read the HIGH WORD of Timer 2 register
+		/* Read the HIGH unsigned short of Timer 2 register */
 		b_Tmp = ((devpriv->
 				b_DigitalOutputRegister) & 0xF0) |
 			APCI3120_SELECT_TIMER_2_HIGH_WORD;
@@ -2335,20 +2296,20 @@ int i_APCI3120_InsnReadTimer(struct comedi_device * dev, struct comedi_subdevice
 
 		us_TmpValue_2 = inw(devpriv->iobase + APCI3120_TIMER_VALUE);
 
-		// combining both words
-		data[0] = (UINT) ((us_TmpValue) | ((us_TmpValue_2) << 16));
+		/*  combining both words */
+		data[0] = (unsigned int) ((us_TmpValue) | ((us_TmpValue_2) << 16));
 
-	} else			// Read watch dog status
+	} else			/*  Read watch dog status */
 	{
 
 		us_StatusValue = inw(devpriv->iobase + APCI3120_RD_STATUS);
 		us_StatusValue =
 			((us_StatusValue & APCI3120_FC_TIMER) >> 12) & 1;
 		if (us_StatusValue == 1) {
-			// RESET FC_TIMER BIT
+			/*  RESET FC_TIMER BIT */
 			inb(devpriv->iobase + APCI3120_TIMER_STATUS_REGISTER);
 		}
-		data[0] = us_StatusValue;	// when data[0] = 1 then the watch dog has rundown
+		data[0] = us_StatusValue;	/*  when data[0] = 1 then the watch dog has rundown */
 	}
 	return insn->n;
 }
@@ -2384,21 +2345,23 @@ int i_APCI3120_InsnReadDigitalInput(struct comedi_device *dev,
 				    struct comedi_insn *insn,
 				    unsigned int *data)
 {
-	UINT ui_Chan, ui_TmpValue;
+	unsigned int ui_Chan, ui_TmpValue;
 
-	ui_Chan = CR_CHAN(insn->chanspec);	// channel specified
+	ui_Chan = CR_CHAN(insn->chanspec);	/*  channel specified */
 
-	//this_board->i_hwdrv_InsnReadDigitalInput(dev,ui_Chan,data);
+	/* this_board->i_hwdrv_InsnReadDigitalInput(dev,ui_Chan,data); */
 	if (ui_Chan >= 0 && ui_Chan <= 3) {
-		ui_TmpValue = (UINT) inw(devpriv->iobase + APCI3120_RD_STATUS);
+		ui_TmpValue = (unsigned int) inw(devpriv->iobase + APCI3120_RD_STATUS);
 
-		//      since only 1 channel reqd  to bring it to last bit it is rotated
-		//  8 +(chan - 1) times then ANDed with 1 for last bit.
+/*
+ * since only 1 channel reqd to bring it to last bit it is rotated 8
+ * +(chan - 1) times then ANDed with 1 for last bit.
+ */
 		*data = (ui_TmpValue >> (ui_Chan + 8)) & 1;
-		//return 0;
+		/* return 0; */
 	} else {
-		//      comedi_error(dev," chan spec wrong");
-		return -EINVAL;	// "sorry channel spec wrong "
+		/*       comedi_error(dev," chan spec wrong"); */
+		return -EINVAL;	/*  "sorry channel spec wrong " */
 	}
 	return insn->n;
 
@@ -2423,18 +2386,18 @@ int i_APCI3120_InsnReadDigitalInput(struct comedi_device *dev,
 |                    													     |
 +----------------------------------------------------------------------------+
 */
-int i_APCI3120_InsnBitsDigitalInput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI3120_InsnBitsDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_TmpValue;
-	ui_TmpValue = (UINT) inw(devpriv->iobase + APCI3120_RD_STATUS);
+	unsigned int ui_TmpValue;
+	ui_TmpValue = (unsigned int) inw(devpriv->iobase + APCI3120_RD_STATUS);
 	/*****	state of 4 channels  in the 11, 10, 9, 8   bits of status reg
 			rotated right 8 times to bring them to last four bits
 			ANDed with oxf for  value.
 	*****/
 
 	*data = (ui_TmpValue >> 8) & 0xf;
-	//this_board->i_hwdrv_InsnBitsDigitalInput(dev,data);
+	/* this_board->i_hwdrv_InsnBitsDigitalInput(dev,data); */
 	return insn->n;
 }
 
@@ -2462,8 +2425,8 @@ int i_APCI3120_InsnBitsDigitalInput(struct comedi_device * dev, struct comedi_su
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3120_InsnConfigDigitalOutput(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI3120_InsnConfigDigitalOutput(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 
 	if ((data[0] != 0) && (data[0] != 1)) {
@@ -2481,7 +2444,7 @@ int i_APCI3120_InsnConfigDigitalOutput(struct comedi_device * dev,
 	if (!devpriv->b_OutputMemoryStatus) {
 		ui_Temp = 0;
 
-	}			//if(!devpriv->b_OutputMemoryStatus )
+	}			/* if(!devpriv->b_OutputMemoryStatus ) */
 
 	return insn->n;
 }
@@ -2499,16 +2462,16 @@ int i_APCI3120_InsnConfigDigitalOutput(struct comedi_device * dev,
 |                     struct comedi_subdevice *s									 |
 |                     struct comedi_insn *insn                                      |
 |                     unsigned int *data 										 |
-                      data[0]     Value to be written
-                      data[1]    :1 Set digital o/p ON
-                      data[1]     2 Set digital o/p OFF with memory ON
+|                      data[0]     Value to be written
+|                      data[1]    :1 Set digital o/p ON
+|                      data[1]     2 Set digital o/p OFF with memory ON
 +----------------------------------------------------------------------------+
 | Return Value      :              					                         |
 |                    													     |
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3120_InsnBitsDigitalOutput(struct comedi_device * dev,
+int i_APCI3120_InsnBitsDigitalOutput(struct comedi_device *dev,
 				     struct comedi_subdevice *s,
 				     struct comedi_insn *insn,
 				     unsigned int *data)
@@ -2530,7 +2493,7 @@ int i_APCI3120_InsnBitsDigitalOutput(struct comedi_device * dev,
 	default:
 		printk("\nThe parameter passed is in error \n");
 		return -EINVAL;
-	}			// switch(data[1])
+	}			/*  switch(data[1]) */
 	outb(data[0], devpriv->iobase + APCI3120_DIGITAL_OUTPUT);
 
 	devpriv->b_DigitalOutputRegister = data[0] & 0xF0;
@@ -2567,9 +2530,9 @@ int i_APCI3120_InsnWriteDigitalOutput(struct comedi_device *dev,
 				      unsigned int *data)
 {
 
-	UINT ui_Temp1;
+	unsigned int ui_Temp1;
 
-	UINT ui_NoOfChannel = CR_CHAN(insn->chanspec);	// get the channel
+	unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec);	/*  get the channel */
 
 	if ((data[0] != 0) && (data[0] != 1)) {
 		comedi_error(dev,
@@ -2586,7 +2549,7 @@ int i_APCI3120_InsnWriteDigitalOutput(struct comedi_device *dev,
 	switch (data[1]) {
 	case 1:
 		data[0] = (data[0] << ui_NoOfChannel);
-//ES05                   data[0]=(data[0]<<4)|ui_Temp;
+/* ES05                   data[0]=(data[0]<<4)|ui_Temp; */
 		data[0] = (data[0] << 4) | devpriv->b_DigitalOutputRegister;
 		break;
 
@@ -2595,24 +2558,24 @@ int i_APCI3120_InsnWriteDigitalOutput(struct comedi_device *dev,
 		ui_Temp1 = 1;
 		ui_Temp1 = ui_Temp1 << ui_NoOfChannel;
 		ui_Temp1 = ui_Temp1 << 4;
-//ES05                   ui_Temp=ui_Temp|ui_Temp1;
+/* ES05                   ui_Temp=ui_Temp|ui_Temp1; */
 		devpriv->b_DigitalOutputRegister =
 			devpriv->b_DigitalOutputRegister | ui_Temp1;
 
 		data[0] = (data[0] << ui_NoOfChannel) ^ 0xf;
 		data[0] = data[0] << 4;
-//ES05                   data[0]=data[0]& ui_Temp;
+/* ES05                   data[0]=data[0]& ui_Temp; */
 		data[0] = data[0] & devpriv->b_DigitalOutputRegister;
 		break;
 	default:
 		printk("\nThe parameter passed is in error \n");
 		return -EINVAL;
-	}			// switch(data[1])
+	}			/*  switch(data[1]) */
 	outb(data[0], devpriv->iobase + APCI3120_DIGITAL_OUTPUT);
 
-//ES05        ui_Temp=data[0] & 0xf0;
+/* ES05        ui_Temp=data[0] & 0xf0; */
 	devpriv->b_DigitalOutputRegister = data[0] & 0xf0;
-	return (insn->n);
+	return insn->n;
 
 }
 
@@ -2646,14 +2609,14 @@ int i_APCI3120_InsnWriteAnalogOutput(struct comedi_device *dev,
 				     struct comedi_insn *insn,
 				     unsigned int *data)
 {
-	UINT ui_Range, ui_Channel;
-	USHORT us_TmpValue;
+	unsigned int ui_Range, ui_Channel;
+	unsigned short us_TmpValue;
 
 	ui_Range = CR_RANGE(insn->chanspec);
 	ui_Channel = CR_CHAN(insn->chanspec);
 
-	//this_board->i_hwdrv_InsnWriteAnalogOutput(dev, ui_Range, ui_Channel,data[0]);
-	if (ui_Range)		// if 1 then unipolar
+	/* this_board->i_hwdrv_InsnWriteAnalogOutput(dev, ui_Range, ui_Channel,data[0]); */
+	if (ui_Range)		/*  if 1 then unipolar */
 	{
 
 		if (data[0] != 0)
@@ -2665,7 +2628,7 @@ int i_APCI3120_InsnWriteAnalogOutput(struct comedi_device *dev,
 				((((ui_Channel & 0x03) << 14) & 0xC000) | (1 <<
 					13) | 8192);
 
-	} else			// if 0 then   bipolar
+	} else			/*  if 0 then   bipolar */
 	{
 		data[0] =
 			((((ui_Channel & 0x03) << 14) & 0xC000) | (0 << 13) |
@@ -2673,24 +2636,30 @@ int i_APCI3120_InsnWriteAnalogOutput(struct comedi_device *dev,
 
 	}
 
-	//out put n values at the given channel.
-	// rt_printk("\nwaiting for DA_READY BIT");
-	do			//Waiting of DA_READY BIT
+/*
+ * out put n values at the given channel. printk("\nwaiting for
+ * DA_READY BIT");
+ */
+	do			/* Waiting of DA_READY BIT */
 	{
 		us_TmpValue =
-			((USHORT) inw(devpriv->iobase +
+			((unsigned short) inw(devpriv->iobase +
 				APCI3120_RD_STATUS)) & 0x0001;
 	} while (us_TmpValue != 0x0001);
 
 	if (ui_Channel <= 3)
-		// for channel 0-3 out at  the register 1 (wrDac1-8)
-		// data[i] typecasted to ushort since  word write is to be done
-		outw((USHORT) data[0],
+/*
+ * for channel 0-3 out at the register 1 (wrDac1-8) data[i]
+ * typecasted to ushort since word write is to be done
+ */
+		outw((unsigned short) data[0],
 			devpriv->iobase + APCI3120_ANALOG_OUTPUT_1);
 	else
-		// for channel 4-7 out at the register 2 (wrDac5-8)
-		//data[i] typecasted to ushort since  word write is to be done
-		outw((USHORT) data[0],
+/*
+ * for channel 4-7 out at the register 2 (wrDac5-8) data[i]
+ * typecasted to ushort since word write is to be done
+ */
+		outw((unsigned short) data[0],
 			devpriv->iobase + APCI3120_ANALOG_OUTPUT_2);
 
 	return insn->n;
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.h
index 59d5d87a845..fedfc9c58a8 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.h
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.h
@@ -1,5 +1,5 @@
 
-// hwdrv_apci3120.h
+/* hwdrv_apci3120.h */
 
 /*
  * Copyright (C) 2004,2005  ADDI-DATA GmbH for the source code of this module.
@@ -18,9 +18,9 @@
  * any later version.
  */
 
-// comedi related defines
+/* comedi related defines */
 
-//ANALOG INPUT RANGE
+/* ANALOG INPUT RANGE */
 static const struct comedi_lrange range_apci3120_ai = { 8, {
 						     BIP_RANGE(10),
 						     BIP_RANGE(5),
@@ -33,14 +33,14 @@ static const struct comedi_lrange range_apci3120_ai = { 8, {
 						     }
 };
 
-// ANALOG OUTPUT RANGE
+/* ANALOG OUTPUT RANGE */
 static const struct comedi_lrange range_apci3120_ao = { 2, {
 						     BIP_RANGE(10),
 						     UNI_RANGE(10)
 						     }
 };
 
-#define APCI3120_BIPOLAR_RANGES	4	// used for test on mixture of BIP/UNI ranges
+#define APCI3120_BIPOLAR_RANGES	4	/*  used for test on mixture of BIP/UNI ranges */
 
 #define APCI3120_BOARD_VENDOR_ID                 0x10E8
 #define APCI3120_ADDRESS_RANGE            			16
@@ -55,17 +55,17 @@ static const struct comedi_lrange range_apci3120_ao = { 2, {
 #define     APCI3120_EOS_MODE         2
 #define     APCI3120_DMA_MODE         3
 
-//DIGITAL INPUT-OUTPUT DEFINE
+/* DIGITAL INPUT-OUTPUT DEFINE */
 
 #define APCI3120_DIGITAL_OUTPUT                  	0x0D
 #define APCI3120_RD_STATUS                       	0x02
 #define APCI3120_RD_FIFO                     		0x00
 
-// digital output insn_write ON /OFF selection
+/* digital output insn_write ON /OFF selection */
 #define	APCI3120_SET4DIGITALOUTPUTON				1
 #define APCI3120_SET4DIGITALOUTPUTOFF				0
 
-// analog output SELECT BIT
+/* analog output SELECT BIT */
 #define APCI3120_ANALOG_OP_CHANNEL_1   0x0000
 #define APCI3120_ANALOG_OP_CHANNEL_2   0x4000
 #define APCI3120_ANALOG_OP_CHANNEL_3   0x8000
@@ -75,32 +75,32 @@ static const struct comedi_lrange range_apci3120_ao = { 2, {
 #define APCI3120_ANALOG_OP_CHANNEL_7   0x8000
 #define APCI3120_ANALOG_OP_CHANNEL_8   0xC000
 
-// Enable external trigger bit in nWrAddress
+/* Enable external trigger bit in nWrAddress */
 #define APCI3120_ENABLE_EXT_TRIGGER    0x8000
 
-//ANALOG OUTPUT AND INPUT DEFINE
-#define APCI3120_UNIPOLAR 0x80	//$$ RAM sequence polarity BIT
-#define APCI3120_BIPOLAR  0x00	//$$ RAM sequence polarity BIT
-#define APCI3120_ANALOG_OUTPUT_1 0x08	// (ADDRESS )
-#define APCI3120_ANALOG_OUTPUT_2 0x0A	// (ADDRESS )
-#define APCI3120_1_GAIN              0x00	//$$ RAM sequence Gain Bits for gain 1
-#define APCI3120_2_GAIN              0x10	//$$ RAM sequence Gain Bits for gain 2
-#define APCI3120_5_GAIN              0x20	//$$ RAM sequence Gain Bits for gain 5
-#define APCI3120_10_GAIN             0x30	//$$ RAM sequence Gain Bits for gain 10
-#define APCI3120_SEQ_RAM_ADDRESS        0x06	//$$ EARLIER NAMED APCI3120_FIFO_ADDRESS
-#define APCI3120_RESET_FIFO          0x0C	//(ADDRESS)
-#define APCI3120_TIMER_0_MODE_2      0x01	//$$ Bits for timer mode
+/* ANALOG OUTPUT AND INPUT DEFINE */
+#define APCI3120_UNIPOLAR 0x80	/* $$ RAM sequence polarity BIT */
+#define APCI3120_BIPOLAR  0x00	/* $$ RAM sequence polarity BIT */
+#define APCI3120_ANALOG_OUTPUT_1 0x08	/*  (ADDRESS ) */
+#define APCI3120_ANALOG_OUTPUT_2 0x0A	/*  (ADDRESS ) */
+#define APCI3120_1_GAIN              0x00	/* $$ RAM sequence Gain Bits for gain 1 */
+#define APCI3120_2_GAIN              0x10	/* $$ RAM sequence Gain Bits for gain 2 */
+#define APCI3120_5_GAIN              0x20	/* $$ RAM sequence Gain Bits for gain 5 */
+#define APCI3120_10_GAIN             0x30	/* $$ RAM sequence Gain Bits for gain 10 */
+#define APCI3120_SEQ_RAM_ADDRESS        0x06	/* $$ EARLIER NAMED APCI3120_FIFO_ADDRESS */
+#define APCI3120_RESET_FIFO          0x0C	/* (ADDRESS) */
+#define APCI3120_TIMER_0_MODE_2      0x01	/* $$ Bits for timer mode */
 #define APCI3120_TIMER_0_MODE_4       0x2
 #define APCI3120_SELECT_TIMER_0_WORD 0x00
-#define APCI3120_ENABLE_TIMER0     0x1000	//$$Gatebit 0 in nWrAddress
+#define APCI3120_ENABLE_TIMER0     0x1000	/* $$Gatebit 0 in nWrAddress */
 #define APCI3120_CLEAR_PR          0xF0FF
 #define APCI3120_CLEAR_PA          0xFFF0
 #define APCI3120_CLEAR_PA_PR       (APCI3120_CLEAR_PR & APCI3120_CLEAR_PA)
 
-// nWrMode_Select
-#define APCI3120_ENABLE_SCAN          0x8	//$$ bit in nWrMode_Select
+/* nWrMode_Select */
+#define APCI3120_ENABLE_SCAN          0x8	/* $$ bit in nWrMode_Select */
 #define APCI3120_DISABLE_SCAN      (~APCI3120_ENABLE_SCAN)
-#define APCI3120_ENABLE_EOS_INT       0x2	//$$ bit in nWrMode_Select
+#define APCI3120_ENABLE_EOS_INT       0x2	/* $$ bit in nWrMode_Select */
 
 #define APCI3120_DISABLE_EOS_INT   (~APCI3120_ENABLE_EOS_INT)
 #define APCI3120_ENABLE_EOC_INT       0x1
@@ -108,50 +108,50 @@ static const struct comedi_lrange range_apci3120_ao = { 2, {
 #define APCI3120_DISABLE_ALL_INTERRUPT_WITHOUT_TIMER   (APCI3120_DISABLE_EOS_INT & APCI3120_DISABLE_EOC_INT)
 #define APCI3120_DISABLE_ALL_INTERRUPT   (APCI3120_DISABLE_TIMER_INT & APCI3120_DISABLE_EOS_INT & APCI3120_DISABLE_EOC_INT)
 
-//status register bits
+/* status register bits */
 #define APCI3120_EOC                     0x8000
 #define APCI3120_EOS                     0x2000
 
-// software trigger dummy register
-#define APCI3120_START_CONVERSION        0x02	//(ADDRESS)
+/* software trigger dummy register */
+#define APCI3120_START_CONVERSION        0x02	/* (ADDRESS) */
 
-//TIMER DEFINE
+/* TIMER DEFINE */
 #define APCI3120_QUARTZ_A				  70
 #define APCI3120_QUARTZ_B				  50
 #define APCI3120_TIMER                            1
 #define APCI3120_WATCHDOG                         2
 #define APCI3120_TIMER_DISABLE                    0
 #define APCI3120_TIMER_ENABLE                     1
-#define APCI3120_ENABLE_TIMER2                    0x4000	//$$ gatebit 2 in nWrAddress
+#define APCI3120_ENABLE_TIMER2                    0x4000	/* $$ gatebit 2 in nWrAddress */
 #define APCI3120_DISABLE_TIMER2                   (~APCI3120_ENABLE_TIMER2)
-#define APCI3120_ENABLE_TIMER_INT                 0x04	//$$ ENAIRQ_FC_Bit in nWrModeSelect
+#define APCI3120_ENABLE_TIMER_INT                 0x04	/* $$ ENAIRQ_FC_Bit in nWrModeSelect */
 #define APCI3120_DISABLE_TIMER_INT                (~APCI3120_ENABLE_TIMER_INT)
-#define APCI3120_WRITE_MODE_SELECT                0x0E	// (ADDRESS)
+#define APCI3120_WRITE_MODE_SELECT                0x0E	/*  (ADDRESS) */
 #define APCI3120_SELECT_TIMER_0_WORD  0x00
 #define APCI3120_SELECT_TIMER_1_WORD  0x01
 #define APCI3120_TIMER_1_MODE_2       0x4
 
-//$$ BIT FOR MODE IN nCsTimerCtr1
+/* $$ BIT FOR MODE IN nCsTimerCtr1 */
 #define APCI3120_TIMER_2_MODE_0                   0x0
 #define APCI3120_TIMER_2_MODE_2                   0x10
 #define APCI3120_TIMER_2_MODE_5                   0x30
 
-//$$ BIT FOR MODE IN nCsTimerCtr0
+/* $$ BIT FOR MODE IN nCsTimerCtr0 */
 #define APCI3120_SELECT_TIMER_2_LOW_WORD          0x02
 #define APCI3120_SELECT_TIMER_2_HIGH_WORD         0x03
 
-#define APCI3120_TIMER_CRT0                       0x0D	//(ADDRESS for cCsTimerCtr0)
-#define APCI3120_TIMER_CRT1                       0x0C	//(ADDRESS for cCsTimerCtr1)
+#define APCI3120_TIMER_CRT0                       0x0D	/* (ADDRESS for cCsTimerCtr0) */
+#define APCI3120_TIMER_CRT1                       0x0C	/* (ADDRESS for cCsTimerCtr1) */
 
-#define APCI3120_TIMER_VALUE                      0x04	//ADDRESS for nCsTimerWert
-#define APCI3120_TIMER_STATUS_REGISTER            0x0D	//ADDRESS for delete timer 2 interrupt
-#define APCI3120_RD_STATUS                        0x02	//ADDRESS
-#define APCI3120_WR_ADDRESS                       0x00	//ADDRESS
-#define APCI3120_ENABLE_WATCHDOG                  0x20	//$$BIT in nWrMode_Select
+#define APCI3120_TIMER_VALUE                      0x04	/* ADDRESS for nCsTimerWert */
+#define APCI3120_TIMER_STATUS_REGISTER            0x0D	/* ADDRESS for delete timer 2 interrupt */
+#define APCI3120_RD_STATUS                        0x02	/* ADDRESS */
+#define APCI3120_WR_ADDRESS                       0x00	/* ADDRESS */
+#define APCI3120_ENABLE_WATCHDOG                  0x20	/* $$BIT in nWrMode_Select */
 #define APCI3120_DISABLE_WATCHDOG                 (~APCI3120_ENABLE_WATCHDOG)
-#define APCI3120_ENABLE_TIMER_COUNTER    		  0x10	//$$BIT in nWrMode_Select
+#define APCI3120_ENABLE_TIMER_COUNTER    		  0x10	/* $$BIT in nWrMode_Select */
 #define APCI3120_DISABLE_TIMER_COUNTER            (~APCI3120_ENABLE_TIMER_COUNTER)
-#define APCI3120_FC_TIMER                         0x1000	//bit in  status register
+#define APCI3120_FC_TIMER                         0x1000	/* bit in  status register */
 #define APCI3120_ENABLE_TIMER0                    0x1000
 #define APCI3120_ENABLE_TIMER1                    0x2000
 #define APCI3120_ENABLE_TIMER2                    0x4000
@@ -159,25 +159,27 @@ static const struct comedi_lrange range_apci3120_ao = { 2, {
 #define APCI3120_DISABLE_TIMER1		              (~APCI3120_ENABLE_TIMER1)
 #define APCI3120_DISABLE_TIMER2	                  (~APCI3120_ENABLE_TIMER2)
 
-#define APCI3120_TIMER2_SELECT_EOS                0xC0	// ADDED on 20-6
-#define APCI3120_COUNTER                          3	// on 20-6
-#define APCI3120_DISABLE_ALL_TIMER                ( APCI3120_DISABLE_TIMER0 & APCI3120_DISABLE_TIMER1 & APCI3120_DISABLE_TIMER2 )	// on 20-6
+#define APCI3120_TIMER2_SELECT_EOS                0xC0	/*  ADDED on 20-6 */
+#define APCI3120_COUNTER                          3	/*  on 20-6 */
+#define APCI3120_DISABLE_ALL_TIMER                (APCI3120_DISABLE_TIMER0 & APCI3120_DISABLE_TIMER1 & APCI3120_DISABLE_TIMER2)	/*  on 20-6 */
 
 #define MAX_ANALOGINPUT_CHANNELS    32
 
-typedef struct {
-	BYTE b_Type;		/* EOC or EOS */
-	BYTE b_InterruptFlag;	/* Interrupt use or not                    */
-	UINT ui_ConvertTiming;	/* Selection of the convertion time        */
-	BYTE b_NbrOfChannel;	/* Number of channel to read               */
-	UINT ui_ChannelList[MAX_ANALOGINPUT_CHANNELS];	/* Number of the channel to be read        */
-	UINT ui_RangeList[MAX_ANALOGINPUT_CHANNELS];	/* Gain of each channel                    */
+struct str_AnalogReadInformation {
 
-} str_AnalogReadInformation;
+	unsigned char b_Type;		/* EOC or EOS */
+	unsigned char b_InterruptFlag;	/* Interrupt use or not                    */
+	unsigned int ui_ConvertTiming;	/* Selection of the convertion time        */
+	unsigned char b_NbrOfChannel;	/* Number of channel to read               */
+	unsigned int ui_ChannelList[MAX_ANALOGINPUT_CHANNELS];	/* Number of the channel to be read        */
+	unsigned int ui_RangeList[MAX_ANALOGINPUT_CHANNELS];	/* Gain of each channel                    */
+
+};
 
-// Function Declaration For APCI-3120
 
-// Internal functions
+/* Function Declaration For APCI-3120 */
+
+/* Internal functions */
 int i_APCI3120_SetupChannelList(struct comedi_device *dev, struct comedi_subdevice *s,
 				int n_chan, unsigned int *chanlist, char check);
 int i_APCI3120_ExttrigEnable(struct comedi_device *dev);
@@ -186,9 +188,9 @@ int i_APCI3120_StopCyclicAcquisition(struct comedi_device *dev, struct comedi_su
 int i_APCI3120_Reset(struct comedi_device *dev);
 int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device *dev,
 				 struct comedi_subdevice *s);
-// Interrupt functions
+/* Interrupt functions */
 void v_APCI3120_Interrupt(int irq, void *d);
-//UPDATE-0.7.57->0.7.68 void v_APCI3120_InterruptDmaMoveBlock16bit(struct comedi_device *dev,struct comedi_subdevice *s,short *dma,short *data,int n);
+/* UPDATE-0.7.57->0.7.68 void v_APCI3120_InterruptDmaMoveBlock16bit(struct comedi_device *dev,struct comedi_subdevice *s,short *dma,short *data,int n); */
 void v_APCI3120_InterruptDmaMoveBlock16bit(struct comedi_device *dev,
 					   struct comedi_subdevice *s,
 					   short *dma_buffer,
@@ -196,7 +198,7 @@ void v_APCI3120_InterruptDmaMoveBlock16bit(struct comedi_device *dev,
 int i_APCI3120_InterruptHandleEos(struct comedi_device *dev);
 void v_APCI3120_InterruptDma(int irq, void *d);
 
-// TIMER
+/* TIMER */
 
 int i_APCI3120_InsnConfigTimer(struct comedi_device *dev, struct comedi_subdevice *s,
 			       struct comedi_insn *insn, unsigned int *data);
@@ -205,16 +207,19 @@ int i_APCI3120_InsnWriteTimer(struct comedi_device *dev, struct comedi_subdevice
 int i_APCI3120_InsnReadTimer(struct comedi_device *dev, struct comedi_subdevice *s,
 			     struct comedi_insn *insn, unsigned int *data);
 
-//DI
-// for di read
+/*
+* DI for di read
+*/
 
 int i_APCI3120_InsnBitsDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
 				    struct comedi_insn *insn, unsigned int *data);
 int i_APCI3120_InsnReadDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
 				    struct comedi_insn *insn, unsigned int *data);
 
-//DO
-//int i_APCI3120_WriteDigitalOutput(struct comedi_device *dev, BYTE data);
+/* DO */
+/* int i_APCI3120_WriteDigitalOutput(struct comedi_device *dev,
+ * unsigned char data);
+ */
 int i_APCI3120_InsnConfigDigitalOutput(struct comedi_device *dev,
 				       struct comedi_subdevice *s, struct comedi_insn *insn,
 				       unsigned int *data);
@@ -223,12 +228,15 @@ int i_APCI3120_InsnBitsDigitalOutput(struct comedi_device *dev, struct comedi_su
 int i_APCI3120_InsnWriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
 				      struct comedi_insn *insn, unsigned int *data);
 
-//AO
-//int i_APCI3120_Write1AnalogValue(struct comedi_device *dev,UINT ui_Range,UINT ui_Channel,UINT data );
+/* AO */
+/* int i_APCI3120_Write1AnalogValue(struct comedi_device *dev,UINT ui_Range,
+ * UINT ui_Channel,UINT data );
+ */
+
 int i_APCI3120_InsnWriteAnalogOutput(struct comedi_device *dev, struct comedi_subdevice *s,
 				     struct comedi_insn *insn, unsigned int *data);
 
-//AI HArdware layer
+/* AI HArdware layer */
 
 int i_APCI3120_InsnConfigAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
 				     struct comedi_insn *insn, unsigned int *data);
@@ -237,5 +245,5 @@ int i_APCI3120_InsnReadAnalogInput(struct comedi_device *dev, struct comedi_subd
 int i_APCI3120_CommandTestAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
 				      struct comedi_cmd *cmd);
 int i_APCI3120_CommandAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s);
-//int i_APCI3120_CancelAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s);
+/* int i_APCI3120_CancelAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s); */
 int i_APCI3120_StopCyclicAcquisition(struct comedi_device *dev, struct comedi_subdevice *s);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
index 1ff66bee548..9b53255bd45 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
@@ -3,13 +3,13 @@
 
 Copyright (C) 2004,2005  ADDI-DATA GmbH for the source code of this module.
 
-        ADDI-DATA GmbH
-        Dieselstrasse 3
-        D-77833 Ottersweier
-        Tel: +19(0)7223/9493-0
-        Fax: +49(0)7223/9493-92
-        http://www.addi-data-com
-        info@addi-data.com
+	ADDI-DATA GmbH
+	Dieselstrasse 3
+	D-77833 Ottersweier
+	Tel: +19(0)7223/9493-0
+	Fax: +49(0)7223/9493-92
+	http://www.addi-data-com
+	info@addi-data.com
 
 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
 
@@ -57,73 +57,73 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
   +----------------------------------------------------------------------------+
 */
 #include "hwdrv_apci3200.h"
-//Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+/* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 #include "addi_amcc_S5920.h"
-//#define PRINT_INFO
+/* #define PRINT_INFO */
 
-//End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+/* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 
-//BEGIN JK 06.07.04: Management of sevrals boards
+/* BEGIN JK 06.07.04: Management of sevrals boards */
 /*
-  INT i_CJCAvailable=1;
-  INT i_CJCPolarity=0;
-  INT i_CJCGain=2;//changed from 0 to 2
-  INT i_InterruptFlag=0;
-  INT i_ADDIDATAPolarity;
-  INT i_ADDIDATAGain;
-  INT i_AutoCalibration=0;   //: auto calibration
-  INT i_ADDIDATAConversionTime;
-  INT i_ADDIDATAConversionTimeUnit;
-  INT i_ADDIDATAType;
-  INT i_ChannelNo;
-  INT i_ChannelCount=0;
-  INT i_ScanType;
-  INT i_FirstChannel;
-  INT i_LastChannel;
-  INT i_Sum=0;
-  INT i_Offset;
-  UINT ui_Channel_num=0;
+  int i_CJCAvailable=1;
+  int i_CJCPolarity=0;
+  int i_CJCGain=2;/* changed from 0 to 2 */
+  int i_InterruptFlag=0;
+  int i_ADDIDATAPolarity;
+  int i_ADDIDATAGain;
+  int i_AutoCalibration=0;   /* : auto calibration */
+  int i_ADDIDATAConversionTime;
+  int i_ADDIDATAConversionTimeUnit;
+  int i_ADDIDATAType;
+  int i_ChannelNo;
+  int i_ChannelCount=0;
+  int i_ScanType;
+  int i_FirstChannel;
+  int i_LastChannel;
+  int i_Sum=0;
+  int i_Offset;
+  unsigned int ui_Channel_num=0;
   static int i_Count=0;
-  INT i_Initialised=0;
-  UINT ui_InterruptChannelValue[96]; //Buffer
+  int i_Initialised=0;
+  unsigned int ui_InterruptChannelValue[96]; /* Buffer */
 */
-str_BoardInfos s_BoardInfos[100];	// 100 will be the max number of boards to be used
-//END JK 06.07.04: Management of sevrals boards
+struct str_BoardInfos s_BoardInfos[100];	/*  100 will be the max number of boards to be used */
+/* END JK 06.07.04: Management of sevrals boards */
 
-//Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+/* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 
 /*+----------------------------------------------------------------------------+*/
-/*| Function   Name   : INT i_AddiHeaderRW_ReadEeprom                          |*/
-/*|                               (INT    i_NbOfWordsToRead,                   |*/
-/*|                                DWORD dw_PCIBoardEepromAddress,             |*/
-/*|                                WORD   w_EepromStartAddress,                |*/
-/*|                                PWORD pw_DataRead)                          |*/
+/*| Function   Name   : int i_AddiHeaderRW_ReadEeprom                          |*/
+/*|                               (int    i_NbOfWordsToRead,                   |*/
+/*|                                unsigned int dw_PCIBoardEepromAddress,             |*/
+/*|                                unsigned short   w_EepromStartAddress,                |*/
+/*|                                unsigned short * pw_DataRead)                          |*/
 /*+----------------------------------------------------------------------------+*/
 /*| Task              : Read word from the 5920 eeprom.                        |*/
 /*+----------------------------------------------------------------------------+*/
-/*| Input Parameters  : INT    i_NbOfWordsToRead : Nbr. of word to read        |*/
-/*|                     DWORD dw_PCIBoardEepromAddress : Address of the eeprom |*/
-/*|                     WORD   w_EepromStartAddress : Eeprom strat address     |*/
+/*| Input Parameters  : int    i_NbOfWordsToRead : Nbr. of word to read        |*/
+/*|                     unsigned int dw_PCIBoardEepromAddress : Address of the eeprom |*/
+/*|                     unsigned short   w_EepromStartAddress : Eeprom strat address     |*/
 /*+----------------------------------------------------------------------------+*/
-/*| Output Parameters : PWORD pw_DataRead : Read data                          |*/
+/*| Output Parameters : unsigned short * pw_DataRead : Read data                          |*/
 /*+----------------------------------------------------------------------------+*/
 /*| Return Value      : -                                                      |*/
 /*+----------------------------------------------------------------------------+*/
 
-INT i_AddiHeaderRW_ReadEeprom(INT i_NbOfWordsToRead,
-	DWORD dw_PCIBoardEepromAddress,
-	WORD w_EepromStartAddress, PWORD pw_DataRead)
+int i_AddiHeaderRW_ReadEeprom(int i_NbOfWordsToRead,
+	unsigned int dw_PCIBoardEepromAddress,
+	unsigned short w_EepromStartAddress, unsigned short *pw_DataRead)
 {
-	DWORD dw_eeprom_busy = 0;
-	INT i_Counter = 0;
-	INT i_WordCounter;
-	INT i;
-	BYTE pb_ReadByte[1];
-	BYTE b_ReadLowByte = 0;
-	BYTE b_ReadHighByte = 0;
-	BYTE b_SelectedAddressLow = 0;
-	BYTE b_SelectedAddressHigh = 0;
-	WORD w_ReadWord = 0;
+	unsigned int dw_eeprom_busy = 0;
+	int i_Counter = 0;
+	int i_WordCounter;
+	int i;
+	unsigned char pb_ReadByte[1];
+	unsigned char b_ReadLowByte = 0;
+	unsigned char b_ReadHighByte = 0;
+	unsigned char b_SelectedAddressLow = 0;
+	unsigned char b_SelectedAddressHigh = 0;
+	unsigned short w_ReadWord = 0;
 
 	for (i_WordCounter = 0; i_WordCounter < i_NbOfWordsToRead;
 		i_WordCounter++) {
@@ -132,106 +132,99 @@ INT i_AddiHeaderRW_ReadEeprom(INT i_NbOfWordsToRead,
 				inl(dw_PCIBoardEepromAddress +
 				AMCC_OP_REG_MCSR);
 			dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY;
-		}
-		while (dw_eeprom_busy == EEPROM_BUSY);
+		} while (dw_eeprom_busy == EEPROM_BUSY);
 
 		for (i_Counter = 0; i_Counter < 2; i_Counter++) {
-			b_SelectedAddressLow = (w_EepromStartAddress + i_Counter) % 256;	//Read the low 8 bit part
-			b_SelectedAddressHigh = (w_EepromStartAddress + i_Counter) / 256;	//Read the high 8 bit part
+			b_SelectedAddressLow = (w_EepromStartAddress + i_Counter) % 256;	/* Read the low 8 bit part */
+			b_SelectedAddressHigh = (w_EepromStartAddress + i_Counter) / 256;	/* Read the high 8 bit part */
 
-			//Select the load low address mode
+			/* Select the load low address mode */
 			outb(NVCMD_LOAD_LOW,
 				dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR +
 				3);
 
-			//Wait on busy
+			/* Wait on busy */
 			do {
 				dw_eeprom_busy =
 					inl(dw_PCIBoardEepromAddress +
 					AMCC_OP_REG_MCSR);
 				dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY;
-			}
-			while (dw_eeprom_busy == EEPROM_BUSY);
+			} while (dw_eeprom_busy == EEPROM_BUSY);
 
-			//Load the low address
+			/* Load the low address */
 			outb(b_SelectedAddressLow,
 				dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR +
 				2);
 
-			//Wait on busy
+			/* Wait on busy */
 			do {
 				dw_eeprom_busy =
 					inl(dw_PCIBoardEepromAddress +
 					AMCC_OP_REG_MCSR);
 				dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY;
-			}
-			while (dw_eeprom_busy == EEPROM_BUSY);
+			} while (dw_eeprom_busy == EEPROM_BUSY);
 
-			//Select the load high address mode
+			/* Select the load high address mode */
 			outb(NVCMD_LOAD_HIGH,
 				dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR +
 				3);
 
-			//Wait on busy
+			/* Wait on busy */
 			do {
 				dw_eeprom_busy =
 					inl(dw_PCIBoardEepromAddress +
 					AMCC_OP_REG_MCSR);
 				dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY;
-			}
-			while (dw_eeprom_busy == EEPROM_BUSY);
+			} while (dw_eeprom_busy == EEPROM_BUSY);
 
-			//Load the high address
+			/* Load the high address */
 			outb(b_SelectedAddressHigh,
 				dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR +
 				2);
 
-			//Wait on busy
+			/* Wait on busy */
 			do {
 				dw_eeprom_busy =
 					inl(dw_PCIBoardEepromAddress +
 					AMCC_OP_REG_MCSR);
 				dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY;
-			}
-			while (dw_eeprom_busy == EEPROM_BUSY);
+			} while (dw_eeprom_busy == EEPROM_BUSY);
 
-			//Select the READ mode
+			/* Select the READ mode */
 			outb(NVCMD_BEGIN_READ,
 				dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR +
 				3);
 
-			//Wait on busy
+			/* Wait on busy */
 			do {
 				dw_eeprom_busy =
 					inl(dw_PCIBoardEepromAddress +
 					AMCC_OP_REG_MCSR);
 				dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY;
-			}
-			while (dw_eeprom_busy == EEPROM_BUSY);
+			} while (dw_eeprom_busy == EEPROM_BUSY);
 
-			//Read data into the EEPROM
+			/* Read data into the EEPROM */
 			*pb_ReadByte =
 				inb(dw_PCIBoardEepromAddress +
 				AMCC_OP_REG_MCSR + 2);
 
-			//Wait on busy
+			/* Wait on busy */
 			do {
 				dw_eeprom_busy =
 					inl(dw_PCIBoardEepromAddress +
 					AMCC_OP_REG_MCSR);
 				dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY;
-			}
-			while (dw_eeprom_busy == EEPROM_BUSY);
+			} while (dw_eeprom_busy == EEPROM_BUSY);
 
-			//Select the upper address part
-			if (i_Counter == 0) {
+			/* Select the upper address part */
+			if (i_Counter == 0)
 				b_ReadLowByte = pb_ReadByte[0];
-			} else {
+			else
 				b_ReadHighByte = pb_ReadByte[0];
-			}
 
-			//Sleep
-			for (i = 0; i < 10000; i++) ;
+
+			/* Sleep */
+			msleep(1);
 
 		}
 		w_ReadWord =
@@ -240,10 +233,10 @@ INT i_AddiHeaderRW_ReadEeprom(INT i_NbOfWordsToRead,
 
 		pw_DataRead[i_WordCounter] = w_ReadWord;
 
-		w_EepromStartAddress += 2;	// to read the next word
+		w_EepromStartAddress += 2;	/*  to read the next word */
 
-	}			// for (...) i_NbOfWordsToRead
-	return (0);
+	}			/*  for (...) i_NbOfWordsToRead */
+	return 0;
 }
 
 /*+----------------------------------------------------------------------------+*/
@@ -258,31 +251,31 @@ INT i_AddiHeaderRW_ReadEeprom(INT i_NbOfWordsToRead,
 /*| Return Value      : -                                                      |*/
 /*+----------------------------------------------------------------------------+*/
 
-void v_GetAPCI3200EepromCalibrationValue(DWORD dw_PCIBoardEepromAddress,
-	str_BoardInfos * BoardInformations)
+void v_GetAPCI3200EepromCalibrationValue(unsigned int dw_PCIBoardEepromAddress,
+	struct str_BoardInfos *BoardInformations)
 {
-	WORD w_AnalogInputMainHeaderAddress;
-	WORD w_AnalogInputComponentAddress;
-	WORD w_NumberOfModuls = 0;
-	WORD w_CurrentSources[2];
-	WORD w_ModulCounter = 0;
-	WORD w_FirstHeaderSize = 0;
-	WORD w_NumberOfInputs = 0;
-	WORD w_CJCFlag = 0;
-	WORD w_NumberOfGainValue = 0;
-	WORD w_SingleHeaderAddress = 0;
-	WORD w_SingleHeaderSize = 0;
-	WORD w_Input = 0;
-	WORD w_GainFactorAddress = 0;
-	WORD w_GainFactorValue[2];
-	WORD w_GainIndex = 0;
-	WORD w_GainValue = 0;
+	unsigned short w_AnalogInputMainHeaderAddress;
+	unsigned short w_AnalogInputComponentAddress;
+	unsigned short w_NumberOfModuls = 0;
+	unsigned short w_CurrentSources[2];
+	unsigned short w_ModulCounter = 0;
+	unsigned short w_FirstHeaderSize = 0;
+	unsigned short w_NumberOfInputs = 0;
+	unsigned short w_CJCFlag = 0;
+	unsigned short w_NumberOfGainValue = 0;
+	unsigned short w_SingleHeaderAddress = 0;
+	unsigned short w_SingleHeaderSize = 0;
+	unsigned short w_Input = 0;
+	unsigned short w_GainFactorAddress = 0;
+	unsigned short w_GainFactorValue[2];
+	unsigned short w_GainIndex = 0;
+	unsigned short w_GainValue = 0;
 
   /*****************************************/
   /** Get the Analog input header address **/
   /*****************************************/
-	i_AddiHeaderRW_ReadEeprom(1,	//i_NbOfWordsToRead
-		dw_PCIBoardEepromAddress, 0x116,	//w_EepromStartAddress: Analog input header address
+	i_AddiHeaderRW_ReadEeprom(1,	/* i_NbOfWordsToRead */
+		dw_PCIBoardEepromAddress, 0x116,	/* w_EepromStartAddress: Analog input header address */
 		&w_AnalogInputMainHeaderAddress);
 
   /*******************************************/
@@ -293,8 +286,8 @@ void v_GetAPCI3200EepromCalibrationValue(DWORD dw_PCIBoardEepromAddress,
   /******************************/
   /** Get the number of moduls **/
   /******************************/
-	i_AddiHeaderRW_ReadEeprom(1,	//i_NbOfWordsToRead
-		dw_PCIBoardEepromAddress, w_AnalogInputMainHeaderAddress + 0x02,	//w_EepromStartAddress: Number of conponment
+	i_AddiHeaderRW_ReadEeprom(1,	/* i_NbOfWordsToRead */
+		dw_PCIBoardEepromAddress, w_AnalogInputMainHeaderAddress + 0x02,	/* w_EepromStartAddress: Number of conponment */
 		&w_NumberOfModuls);
 
 	for (w_ModulCounter = 0; w_ModulCounter < w_NumberOfModuls;
@@ -309,8 +302,8 @@ void v_GetAPCI3200EepromCalibrationValue(DWORD dw_PCIBoardEepromAddress,
       /****************************/
       /** Read first header size **/
       /****************************/
-		i_AddiHeaderRW_ReadEeprom(1,	//i_NbOfWordsToRead
-			dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress,	// Address of the first header
+		i_AddiHeaderRW_ReadEeprom(1,	/* i_NbOfWordsToRead */
+			dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress,	/*  Address of the first header */
 			&w_FirstHeaderSize);
 
 		w_FirstHeaderSize = w_FirstHeaderSize >> 4;
@@ -318,8 +311,8 @@ void v_GetAPCI3200EepromCalibrationValue(DWORD dw_PCIBoardEepromAddress,
       /***************************/
       /** Read number of inputs **/
       /***************************/
-		i_AddiHeaderRW_ReadEeprom(1,	//i_NbOfWordsToRead
-			dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 0x06,	// Number of inputs for the first modul
+		i_AddiHeaderRW_ReadEeprom(1,	/* i_NbOfWordsToRead */
+			dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 0x06,	/*  Number of inputs for the first modul */
 			&w_NumberOfInputs);
 
 		w_NumberOfInputs = w_NumberOfInputs >> 4;
@@ -327,17 +320,17 @@ void v_GetAPCI3200EepromCalibrationValue(DWORD dw_PCIBoardEepromAddress,
       /***********************/
       /** Read the CJC flag **/
       /***********************/
-		i_AddiHeaderRW_ReadEeprom(1,	//i_NbOfWordsToRead
-			dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 0x08,	// CJC flag
+		i_AddiHeaderRW_ReadEeprom(1,	/* i_NbOfWordsToRead */
+			dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 0x08,	/*  CJC flag */
 			&w_CJCFlag);
 
-		w_CJCFlag = (w_CJCFlag >> 3) & 0x1;	// Get only the CJC flag
+		w_CJCFlag = (w_CJCFlag >> 3) & 0x1;	/*  Get only the CJC flag */
 
       /*******************************/
       /** Read number of gain value **/
       /*******************************/
-		i_AddiHeaderRW_ReadEeprom(1,	//i_NbOfWordsToRead
-			dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 0x44,	// Number of gain value
+		i_AddiHeaderRW_ReadEeprom(1,	/* i_NbOfWordsToRead */
+			dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 0x44,	/*  Number of gain value */
 			&w_NumberOfGainValue);
 
 		w_NumberOfGainValue = w_NumberOfGainValue & 0xFF;
@@ -354,8 +347,8 @@ void v_GetAPCI3200EepromCalibrationValue(DWORD dw_PCIBoardEepromAddress,
       /********************************************/
       /** Read current sources value for input 1 **/
       /********************************************/
-		i_AddiHeaderRW_ReadEeprom(1,	//i_NbOfWordsToRead
-			dw_PCIBoardEepromAddress, w_SingleHeaderAddress,	//w_EepromStartAddress: Single header address
+		i_AddiHeaderRW_ReadEeprom(1,	/* i_NbOfWordsToRead */
+			dw_PCIBoardEepromAddress, w_SingleHeaderAddress,	/* w_EepromStartAddress: Single header address */
 			&w_SingleHeaderSize);
 
 		w_SingleHeaderSize = w_SingleHeaderSize >> 4;
@@ -370,8 +363,8 @@ void v_GetAPCI3200EepromCalibrationValue(DWORD dw_PCIBoardEepromAddress,
 	  /************************************/
 	  /** Read gain value for the module **/
 	  /************************************/
-			i_AddiHeaderRW_ReadEeprom(1,	//i_NbOfWordsToRead
-				dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 70 + (2 * (1 + (w_NumberOfGainValue / 16))) + (0x02 * w_GainIndex),	// Gain value
+			i_AddiHeaderRW_ReadEeprom(1,	/* i_NbOfWordsToRead */
+				dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 70 + (2 * (1 + (w_NumberOfGainValue / 16))) + (0x02 * w_GainIndex),	/*  Gain value */
 				&w_GainValue);
 
 			BoardInformations->s_Module[w_ModulCounter].
@@ -386,8 +379,8 @@ void v_GetAPCI3200EepromCalibrationValue(DWORD dw_PCIBoardEepromAddress,
 	  /*************************************/
 	  /** Read gain factor for the module **/
 	  /*************************************/
-			i_AddiHeaderRW_ReadEeprom(2,	//i_NbOfWordsToRead
-				dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 70 + ((2 * w_NumberOfGainValue) + (2 * (1 + (w_NumberOfGainValue / 16)))) + (0x04 * w_GainIndex),	// Gain factor
+			i_AddiHeaderRW_ReadEeprom(2,	/* i_NbOfWordsToRead */
+				dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 70 + ((2 * w_NumberOfGainValue) + (2 * (1 + (w_NumberOfGainValue / 16)))) + (0x04 * w_GainIndex),	/*  Gain factor */
 				w_GainFactorValue);
 
 			BoardInformations->s_Module[w_ModulCounter].
@@ -409,7 +402,7 @@ void v_GetAPCI3200EepromCalibrationValue(DWORD dw_PCIBoardEepromAddress,
 	  /********************************************/
 	  /** Read current sources value for input 1 **/
 	  /********************************************/
-			i_AddiHeaderRW_ReadEeprom(2,	//i_NbOfWordsToRead
+			i_AddiHeaderRW_ReadEeprom(2,	/* i_NbOfWordsToRead */
 				dw_PCIBoardEepromAddress,
 				(w_Input * w_SingleHeaderSize) +
 				w_SingleHeaderAddress + 0x0C, w_CurrentSources);
@@ -432,7 +425,7 @@ void v_GetAPCI3200EepromCalibrationValue(DWORD dw_PCIBoardEepromAddress,
       /***************************************/
       /** Read the CJC current source value **/
       /***************************************/
-		i_AddiHeaderRW_ReadEeprom(2,	//i_NbOfWordsToRead
+		i_AddiHeaderRW_ReadEeprom(2,	/* i_NbOfWordsToRead */
 			dw_PCIBoardEepromAddress,
 			(w_Input * w_SingleHeaderSize) + w_SingleHeaderAddress +
 			0x0C, w_CurrentSources);
@@ -453,9 +446,9 @@ void v_GetAPCI3200EepromCalibrationValue(DWORD dw_PCIBoardEepromAddress,
 	}
 }
 
-INT i_APCI3200_GetChannelCalibrationValue(struct comedi_device * dev,
-	unsigned int ui_Channel_num, unsigned int * CJCCurrentSource,
-	unsigned int * ChannelCurrentSource, unsigned int * ChannelGainFactor)
+int i_APCI3200_GetChannelCalibrationValue(struct comedi_device *dev,
+	unsigned int ui_Channel_num, unsigned int *CJCCurrentSource,
+	unsigned int *ChannelCurrentSource, unsigned int *ChannelGainFactor)
 {
 	int i_DiffChannel = 0;
 	int i_Module = 0;
@@ -464,9 +457,9 @@ INT i_APCI3200_GetChannelCalibrationValue(struct comedi_device * dev,
 	printk("\n Channel = %u", ui_Channel_num);
 #endif
 
-	//Test if single or differential mode
+	/* Test if single or differential mode */
 	if (s_BoardInfos[dev->minor].i_ConnectionType == 1) {
-		//if diff
+		/* if diff */
 
 		if ((ui_Channel_num >= 0) && (ui_Channel_num <= 1))
 			i_DiffChannel = ui_Channel_num, i_Module = 0;
@@ -478,7 +471,7 @@ INT i_APCI3200_GetChannelCalibrationValue(struct comedi_device * dev,
 			i_DiffChannel = ui_Channel_num - 6, i_Module = 3;
 
 	} else {
-		// if single
+		/*  if single */
 		if ((ui_Channel_num == 0) || (ui_Channel_num == 1))
 			i_DiffChannel = 0, i_Module = 0;
 		else if ((ui_Channel_num == 2) || (ui_Channel_num == 3))
@@ -497,7 +490,7 @@ INT i_APCI3200_GetChannelCalibrationValue(struct comedi_device * dev,
 			i_DiffChannel = 1, i_Module = 3;
 	}
 
-	//Test if thermocouple or RTD mode
+	/* Test if thermocouple or RTD mode */
 	*CJCCurrentSource =
 		s_BoardInfos[dev->minor].s_Module[i_Module].ul_CurrentSourceCJC;
 #ifdef PRINT_INFO
@@ -510,22 +503,22 @@ INT i_APCI3200_GetChannelCalibrationValue(struct comedi_device * dev,
 #ifdef PRINT_INFO
 	printk("\n ChannelCurrentSource = %lu", *ChannelCurrentSource);
 #endif
-	//      }
-	//   }
+	/*       } */
+	/*    } */
 
-	//Channle gain factor
+	/* Channle gain factor */
 	*ChannelGainFactor =
 		s_BoardInfos[dev->minor].s_Module[i_Module].
 		ul_GainFactor[s_BoardInfos[dev->minor].i_ADDIDATAGain];
 #ifdef PRINT_INFO
 	printk("\n ChannelGainFactor = %lu", *ChannelGainFactor);
 #endif
-	//End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+	/* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 
-	return (0);
+	return 0;
 }
 
-//End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+/* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 
 /*
   +----------------------------------------------------------------------------+
@@ -536,9 +529,9 @@ INT i_APCI3200_GetChannelCalibrationValue(struct comedi_device * dev,
   | Task              : Read  value  of the selected channel or port           |
   +----------------------------------------------------------------------------+
   | Input Parameters  : struct comedi_device *dev      : Driver handle                |
-  |                     UINT ui_NoOfChannels    : No Of Channels To read  for Port
+  |                     unsigned int ui_NoOfChannels    : No Of Channels To read  for Port
   Channel Numberfor single channel
-  |                     UINT data[0]            : 0: Read single channel
+  |                     unsigned int data[0]            : 0: Read single channel
   1: Read port value
   data[1]              Port number
   +----------------------------------------------------------------------------+
@@ -550,24 +543,24 @@ INT i_APCI3200_GetChannelCalibrationValue(struct comedi_device * dev,
   +----------------------------------------------------------------------------+
 */
 
-INT i_APCI3200_ReadDigitalInput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI3200_ReadDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_Temp = 0;
-	UINT ui_NoOfChannel = 0;
+	unsigned int ui_Temp = 0;
+	unsigned int ui_NoOfChannel = 0;
 	ui_NoOfChannel = CR_CHAN(insn->chanspec);
 	ui_Temp = data[0];
 	*data = inl(devpriv->i_IobaseReserved);
 
 	if (ui_Temp == 0) {
 		*data = (*data >> ui_NoOfChannel) & 0x1;
-	}			//if  (ui_Temp==0)
+	}			/* if  (ui_Temp==0) */
 	else {
 		if (ui_Temp == 1) {
 			if (data[1] < 0 || data[1] > 1) {
 				printk("\nThe port number is in error\n");
 				return -EINVAL;
-			}	//if(data[1] < 0 || data[1] >1)
+			}	/* if(data[1] < 0 || data[1] >1) */
 			switch (ui_NoOfChannel) {
 
 			case 2:
@@ -578,13 +571,13 @@ INT i_APCI3200_ReadDigitalInput(struct comedi_device * dev, struct comedi_subdev
 				break;
 			default:
 				comedi_error(dev, " chan spec wrong");
-				return -EINVAL;	// "sorry channel spec wrong "
+				return -EINVAL;	/*  "sorry channel spec wrong " */
 
-			}	//switch(ui_NoOfChannels)
-		}		//if  (ui_Temp==1)
+			}	/* switch(ui_NoOfChannels) */
+		}		/* if  (ui_Temp==1) */
 		else {
 			printk("\nSpecified channel not supported \n");
-		}		//elseif  (ui_Temp==1)
+		}		/* elseif  (ui_Temp==1) */
 	}
 	return insn->n;
 }
@@ -608,21 +601,21 @@ INT i_APCI3200_ReadDigitalInput(struct comedi_device * dev, struct comedi_subdev
   |																	 |
   +----------------------------------------------------------------------------+
 */
-int i_APCI3200_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI3200_ConfigDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 
 	if ((data[0] != 0) && (data[0] != 1)) {
 		comedi_error(dev,
 			"Not a valid Data !!! ,Data should be 1 or 0\n");
 		return -EINVAL;
-	}			//if  ( (data[0]!=0) && (data[0]!=1) )
+	}			/* if  ( (data[0]!=0) && (data[0]!=1) ) */
 	if (data[0]) {
 		devpriv->b_OutputMemoryStatus = ADDIDATA_ENABLE;
-	}			// if  (data[0])
+	}			/*  if  (data[0]) */
 	else {
 		devpriv->b_OutputMemoryStatus = ADDIDATA_DISABLE;
-	}			//else if  (data[0])
+	}			/* else if  (data[0]) */
 	return insn->n;
 }
 
@@ -653,23 +646,23 @@ int i_APCI3200_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_sub
   |			                                                         |
   +----------------------------------------------------------------------------+
 */
-INT i_APCI3200_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI3200_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_Temp = 0, ui_Temp1 = 0;
-	UINT ui_NoOfChannel = CR_CHAN(insn->chanspec);	// get the channel
+	unsigned int ui_Temp = 0, ui_Temp1 = 0;
+	unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec);	/*  get the channel */
 	if (devpriv->b_OutputMemoryStatus) {
 		ui_Temp = inl(devpriv->i_IobaseAddon);
 
-	}			//if(devpriv->b_OutputMemoryStatus )
+	}			/* if(devpriv->b_OutputMemoryStatus ) */
 	else {
 		ui_Temp = 0;
-	}			//if(devpriv->b_OutputMemoryStatus )
+	}			/* if(devpriv->b_OutputMemoryStatus ) */
 	if (data[3] == 0) {
 		if (data[1] == 0) {
 			data[0] = (data[0] << ui_NoOfChannel) | ui_Temp;
 			outl(data[0], devpriv->i_IobaseAddon);
-		}		//if(data[1]==0)
+		}		/* if(data[1]==0) */
 		else {
 			if (data[1] == 1) {
 				switch (ui_NoOfChannel) {
@@ -682,15 +675,15 @@ INT i_APCI3200_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 				case 3:
 					data[0] = (data[0] | ui_Temp);
 					break;
-				}	//switch(ui_NoOfChannels)
+				}	/* switch(ui_NoOfChannels) */
 
 				outl(data[0], devpriv->i_IobaseAddon);
-			}	// if(data[1]==1)
+			}	/*  if(data[1]==1) */
 			else {
 				printk("\nSpecified channel not supported\n");
-			}	//else if(data[1]==1)
-		}		//elseif(data[1]==0)
-	}			//if(data[3]==0)
+			}	/* else if(data[1]==1) */
+		}		/* elseif(data[1]==0) */
+	}			/* if(data[3]==0) */
 	else {
 		if (data[3] == 1) {
 			if (data[1] == 0) {
@@ -701,7 +694,7 @@ INT i_APCI3200_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 				data[0] = (data[0] << ui_NoOfChannel) ^ 0xf;
 				data[0] = data[0] & ui_Temp;
 				outl(data[0], devpriv->i_IobaseAddon);
-			}	//if(data[1]==0)
+			}	/* if(data[1]==0) */
 			else {
 				if (data[1] == 1) {
 					switch (ui_NoOfChannel) {
@@ -725,21 +718,21 @@ INT i_APCI3200_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 					default:
 						comedi_error(dev,
 							" chan spec wrong");
-						return -EINVAL;	// "sorry channel spec wrong "
-					}	//switch(ui_NoOfChannels)
+						return -EINVAL;	/*  "sorry channel spec wrong " */
+					}	/* switch(ui_NoOfChannels) */
 
 					outl(data[0], devpriv->i_IobaseAddon);
-				}	// if(data[1]==1)
+				}	/*  if(data[1]==1) */
 				else {
 					printk("\nSpecified channel not supported\n");
-				}	//else if(data[1]==1)
-			}	//elseif(data[1]==0)
-		}		//if(data[3]==1);
+				}	/* else if(data[1]==1) */
+			}	/* elseif(data[1]==0) */
+		}		/* if(data[3]==1); */
 		else {
 			printk("\nSpecified functionality does not exist\n");
 			return -EINVAL;
-		}		//if else data[3]==1)
-	}			//if else data[3]==0)
+		}		/* if else data[3]==1) */
+	}			/* if else data[3]==0) */
 	return insn->n;
 }
 
@@ -752,8 +745,8 @@ INT i_APCI3200_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
   | Task              : Read  value  of the selected channel or port           |
   +----------------------------------------------------------------------------+
   | Input Parameters  : struct comedi_device *dev      : Driver handle                |
-  |                     UINT ui_NoOfChannels    : No Of Channels To read       |
-  |                     UINT *data              : Data Pointer to read status  |
+  |                     unsigned int ui_NoOfChannels    : No Of Channels To read       |
+  |                     unsigned int *data              : Data Pointer to read status  |
   data[0]                 :0 read single channel
   1 read port value
   data[1]                  port no
@@ -766,23 +759,23 @@ INT i_APCI3200_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
   |			                                                         |
   +----------------------------------------------------------------------------+
 */
-INT i_APCI3200_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI3200_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_Temp;
-	UINT ui_NoOfChannel;
+	unsigned int ui_Temp;
+	unsigned int ui_NoOfChannel;
 	ui_NoOfChannel = CR_CHAN(insn->chanspec);
 	ui_Temp = data[0];
 	*data = inl(devpriv->i_IobaseAddon);
 	if (ui_Temp == 0) {
 		*data = (*data >> ui_NoOfChannel) & 0x1;
-	}			// if  (ui_Temp==0)
+	}			/*  if  (ui_Temp==0) */
 	else {
 		if (ui_Temp == 1) {
 			if (data[1] < 0 || data[1] > 1) {
 				printk("\nThe port selection is in error\n");
 				return -EINVAL;
-			}	//if(data[1] <0 ||data[1] >1)
+			}	/* if(data[1] <0 ||data[1] >1) */
 			switch (ui_NoOfChannel) {
 			case 2:
 				*data = (*data >> (2 * data[1])) & 3;
@@ -793,20 +786,20 @@ INT i_APCI3200_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subde
 
 			default:
 				comedi_error(dev, " chan spec wrong");
-				return -EINVAL;	// "sorry channel spec wrong "
+				return -EINVAL;	/*  "sorry channel spec wrong " */
 				break;
-			}	// switch(ui_NoOfChannels)
-		}		// if  (ui_Temp==1)
+			}	/*  switch(ui_NoOfChannels) */
+		}		/*  if  (ui_Temp==1) */
 		else {
 			printk("\nSpecified channel not supported \n");
-		}		// else if (ui_Temp==1)
-	}			// else if  (ui_Temp==0)
+		}		/*  else if (ui_Temp==1) */
+	}			/*  else if  (ui_Temp==0) */
 	return insn->n;
 }
 
 /*
   +----------------------------------------------------------------------------+
-  | Function   Name   : INT i_APCI3200_ConfigAnalogInput                       |
+  | Function   Name   : int i_APCI3200_ConfigAnalogInput                       |
   |			  (struct comedi_device *dev,struct comedi_subdevice *s,               |
   |                      struct comedi_insn *insn,unsigned int *data)                     |
   +----------------------------------------------------------------------------+
@@ -874,30 +867,30 @@ INT i_APCI3200_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subde
   |			                                                         |
   +----------------------------------------------------------------------------+
 */
-INT i_APCI3200_ConfigAnalogInput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI3200_ConfigAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 
-	UINT ul_Config = 0, ul_Temp = 0;
-	UINT ui_ChannelNo = 0;
-	UINT ui_Dummy = 0;
-	INT i_err = 0;
+	unsigned int ul_Config = 0, ul_Temp = 0;
+	unsigned int ui_ChannelNo = 0;
+	unsigned int ui_Dummy = 0;
+	int i_err = 0;
 
-	//Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+	/* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 
 #ifdef PRINT_INFO
-	INT i = 0, i2 = 0;
+	int i = 0, i2 = 0;
 #endif
-	//End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+	/* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 
-	//BEGIN JK 06.07.04: Management of sevrals boards
-	// Initialize the structure
+	/* BEGIN JK 06.07.04: Management of sevrals boards */
+	/*  Initialize the structure */
 	if (s_BoardInfos[dev->minor].b_StructInitialized != 1) {
 		s_BoardInfos[dev->minor].i_CJCAvailable = 1;
 		s_BoardInfos[dev->minor].i_CJCPolarity = 0;
-		s_BoardInfos[dev->minor].i_CJCGain = 2;	//changed from 0 to 2
+		s_BoardInfos[dev->minor].i_CJCGain = 2;	/* changed from 0 to 2 */
 		s_BoardInfos[dev->minor].i_InterruptFlag = 0;
-		s_BoardInfos[dev->minor].i_AutoCalibration = 0;	//: auto calibration
+		s_BoardInfos[dev->minor].i_AutoCalibration = 0;	/* : auto calibration */
 		s_BoardInfos[dev->minor].i_ChannelCount = 0;
 		s_BoardInfos[dev->minor].i_Sum = 0;
 		s_BoardInfos[dev->minor].ui_Channel_num = 0;
@@ -905,11 +898,11 @@ INT i_APCI3200_ConfigAnalogInput(struct comedi_device * dev, struct comedi_subde
 		s_BoardInfos[dev->minor].i_Initialised = 0;
 		s_BoardInfos[dev->minor].b_StructInitialized = 1;
 
-		//Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+		/* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 		s_BoardInfos[dev->minor].i_ConnectionType = 0;
-		//End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+		/* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 
-		//Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+		/* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 		memset(s_BoardInfos[dev->minor].s_Module, 0,
 			sizeof(s_BoardInfos[dev->minor].s_Module[MAX_MODULE]));
 
@@ -938,72 +931,72 @@ INT i_APCI3200_ConfigAnalogInput(struct comedi_device * dev, struct comedi_subde
 			}
 		}
 #endif
-		//End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+		/* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 	}
 
 	if (data[0] != 0 && data[0] != 1 && data[0] != 2) {
 		printk("\nThe selection of acquisition type is in error\n");
 		i_err++;
-	}			//if(data[0]!=0 && data[0]!=1 && data[0]!=2)
+	}			/* if(data[0]!=0 && data[0]!=1 && data[0]!=2) */
 	if (data[0] == 1) {
 		if (data[14] != 0 && data[14] != 1 && data[14] != 2
 			&& data[14] != 4) {
 			printk("\n Error in selection of RTD connection type\n");
 			i_err++;
-		}		//if(data[14]!=0 && data[14]!=1 && data[14]!=2 && data[14]!=4)
-	}			//if(data[0]==1 )
+		}		/* if(data[14]!=0 && data[14]!=1 && data[14]!=2 && data[14]!=4) */
+	}			/* if(data[0]==1 ) */
 	if (data[1] < 0 || data[1] > 7) {
 		printk("\nThe selection of gain is in error\n");
 		i_err++;
-	}			// if(data[1]<0 || data[1]>7)
+	}			/*  if(data[1]<0 || data[1]>7) */
 	if (data[2] != 0 && data[2] != 1) {
 		printk("\nThe selection of polarity is in error\n");
 		i_err++;
-	}			//if(data[2]!=0 &&  data[2]!=1)
+	}			/* if(data[2]!=0 &&  data[2]!=1) */
 	if (data[3] != 0) {
 		printk("\nThe selection of offset range  is in error\n");
 		i_err++;
-	}			// if(data[3]!=0)
+	}			/*  if(data[3]!=0) */
 	if (data[4] != 0 && data[4] != 1) {
 		printk("\nThe selection of coupling is in error\n");
 		i_err++;
-	}			//if(data[4]!=0 &&  data[4]!=1)
+	}			/* if(data[4]!=0 &&  data[4]!=1) */
 	if (data[5] != 0 && data[5] != 1) {
 		printk("\nThe selection of single/differential mode is in error\n");
 		i_err++;
-	}			//if(data[5]!=0 &&  data[5]!=1)
+	}			/* if(data[5]!=0 &&  data[5]!=1) */
 	if (data[8] != 0 && data[8] != 1 && data[2] != 2) {
 		printk("\nError in selection of functionality\n");
-	}			//if(data[8]!=0 && data[8]!=1 && data[2]!=2)
+	}			/* if(data[8]!=0 && data[8]!=1 && data[2]!=2) */
 	if (data[12] == 0 || data[12] == 1) {
 		if (data[6] != 20 && data[6] != 40 && data[6] != 80
 			&& data[6] != 160) {
 			printk("\nThe selection of conversion time reload value is in error\n");
 			i_err++;
-		}		// if (data[6]!=20 && data[6]!=40 && data[6]!=80 && data[6]!=160 )
+		}		/*  if (data[6]!=20 && data[6]!=40 && data[6]!=80 && data[6]!=160 ) */
 		if (data[7] != 2) {
 			printk("\nThe selection of conversion time unit  is in error\n");
 			i_err++;
-		}		// if(data[7]!=2)
+		}		/*  if(data[7]!=2) */
 	}
 	if (data[9] != 0 && data[9] != 1) {
 		printk("\nThe selection of interrupt enable is in error\n");
 		i_err++;
-	}			//if(data[9]!=0 &&  data[9]!=1)
+	}			/* if(data[9]!=0 &&  data[9]!=1) */
 	if (data[11] < 0 || data[11] > 4) {
 		printk("\nThe selection of module is in error\n");
 		i_err++;
-	}			//if(data[11] <0 ||  data[11]>1)
+	}			/* if(data[11] <0 ||  data[11]>1) */
 	if (data[12] < 0 || data[12] > 3) {
 		printk("\nThe selection of singlechannel/scan selection is in error\n");
 		i_err++;
-	}			//if(data[12] < 0 ||  data[12]> 3)
+	}			/* if(data[12] < 0 ||  data[12]> 3) */
 	if (data[13] < 0 || data[13] > 16) {
 		printk("\nThe selection of number of channels is in error\n");
 		i_err++;
-	}			// if(data[13] <0 ||data[13] >15)
+	}			/*  if(data[13] <0 ||data[13] >15) */
 
-	//BEGIN JK 06.07.04: Management of sevrals boards
+	/* BEGIN JK 06.07.04: Management of sevrals boards */
 	/*
 	   i_ChannelCount=data[13];
 	   i_ScanType=data[12];
@@ -1014,7 +1007,7 @@ INT i_APCI3200_ConfigAnalogInput(struct comedi_device * dev, struct comedi_subde
 	   i_ADDIDATAType=data[0];
 	 */
 
-	// Save acquisition configuration for the actual board
+	/*  Save acquisition configuration for the actual board */
 	s_BoardInfos[dev->minor].i_ChannelCount = data[13];
 	s_BoardInfos[dev->minor].i_ScanType = data[12];
 	s_BoardInfos[dev->minor].i_ADDIDATAPolarity = data[2];
@@ -1022,307 +1015,307 @@ INT i_APCI3200_ConfigAnalogInput(struct comedi_device * dev, struct comedi_subde
 	s_BoardInfos[dev->minor].i_ADDIDATAConversionTime = data[6];
 	s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit = data[7];
 	s_BoardInfos[dev->minor].i_ADDIDATAType = data[0];
-	//Begin JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
+	/* Begin JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
 	s_BoardInfos[dev->minor].i_ConnectionType = data[5];
-	//End JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
-	//END JK 06.07.04: Management of sevrals boards
+	/* End JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+	/* END JK 06.07.04: Management of sevrals boards */
 
-	//Begin JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
-	memset(s_BoardInfos[dev->minor].ui_ScanValueArray, 0, (7 + 12) * sizeof(unsigned int));	// 7 is the maximal number of channels
-	//End JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
+	/* Begin JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+	memset(s_BoardInfos[dev->minor].ui_ScanValueArray, 0, (7 + 12) * sizeof(unsigned int));	/*  7 is the maximal number of channels */
+	/* End JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
 
-	//BEGIN JK 02.07.04 : This while can't be do, it block the process when using severals boards
-	//while(i_InterruptFlag==1)
+	/* BEGIN JK 02.07.04 : This while can't be do, it block the process when using severals boards */
+	/* while(i_InterruptFlag==1) */
 	while (s_BoardInfos[dev->minor].i_InterruptFlag == 1) {
 #ifndef MSXBOX
 		udelay(1);
 #else
-		// In the case where the driver is compiled for the MSX-Box
-		// we used a printk to have a little delay because udelay
-		// seems to be broken under the MSX-Box.
-		// This solution hat to be studied.
+		/*  In the case where the driver is compiled for the MSX-Box */
+		/*  we used a printk to have a little delay because udelay */
+		/*  seems to be broken under the MSX-Box. */
+		/*  This solution hat to be studied. */
 		printk("");
 #endif
 	}
-	//END JK 02.07.04 : This while can't be do, it block the process when using severals boards
+	/* END JK 02.07.04 : This while can't be do, it block the process when using severals boards */
 
-	ui_ChannelNo = CR_CHAN(insn->chanspec);	// get the channel
-	//BEGIN JK 06.07.04: Management of sevrals boards
-	//i_ChannelNo=ui_ChannelNo;
-	//ui_Channel_num =ui_ChannelNo;
+	ui_ChannelNo = CR_CHAN(insn->chanspec);	/*  get the channel */
+	/* BEGIN JK 06.07.04: Management of sevrals boards */
+	/* i_ChannelNo=ui_ChannelNo; */
+	/* ui_Channel_num =ui_ChannelNo; */
 
 	s_BoardInfos[dev->minor].i_ChannelNo = ui_ChannelNo;
 	s_BoardInfos[dev->minor].ui_Channel_num = ui_ChannelNo;
 
-	//END JK 06.07.04: Management of sevrals boards
+	/* END JK 06.07.04: Management of sevrals boards */
 
 	if (data[5] == 0) {
 		if (ui_ChannelNo < 0 || ui_ChannelNo > 15) {
 			printk("\nThe Selection of the channel is in error\n");
 			i_err++;
-		}		// if(ui_ChannelNo<0 || ui_ChannelNo>15)
-	}			//if(data[5]==0)
+		}		/*  if(ui_ChannelNo<0 || ui_ChannelNo>15) */
+	}			/* if(data[5]==0) */
 	else {
 		if (data[14] == 2) {
 			if (ui_ChannelNo < 0 || ui_ChannelNo > 3) {
 				printk("\nThe Selection of the channel is in error\n");
 				i_err++;
-			}	// if(ui_ChannelNo<0 || ui_ChannelNo>3)
-		}		//if(data[14]==2)
+			}	/*  if(ui_ChannelNo<0 || ui_ChannelNo>3) */
+		}		/* if(data[14]==2) */
 		else {
 			if (ui_ChannelNo < 0 || ui_ChannelNo > 7) {
 				printk("\nThe Selection of the channel is in error\n");
 				i_err++;
-			}	// if(ui_ChannelNo<0 || ui_ChannelNo>7)
-		}		//elseif(data[14]==2)
-	}			//elseif(data[5]==0)
+			}	/*  if(ui_ChannelNo<0 || ui_ChannelNo>7) */
+		}		/* elseif(data[14]==2) */
+	}			/* elseif(data[5]==0) */
 	if (data[12] == 0 || data[12] == 1) {
 		switch (data[5]) {
 		case 0:
 			if (ui_ChannelNo >= 0 && ui_ChannelNo <= 3) {
-				//BEGIN JK 06.07.04: Management of sevrals boards
-				//i_Offset=0;
+				/* BEGIN JK 06.07.04: Management of sevrals boards */
+				/* i_Offset=0; */
 				s_BoardInfos[dev->minor].i_Offset = 0;
-				//END JK 06.07.04: Management of sevrals boards
-			}	//if(ui_ChannelNo >=0 && ui_ChannelNo <=3)
+				/* END JK 06.07.04: Management of sevrals boards */
+			}	/* if(ui_ChannelNo >=0 && ui_ChannelNo <=3) */
 			if (ui_ChannelNo >= 4 && ui_ChannelNo <= 7) {
-				//BEGIN JK 06.07.04: Management of sevrals boards
-				//i_Offset=64;
+				/* BEGIN JK 06.07.04: Management of sevrals boards */
+				/* i_Offset=64; */
 				s_BoardInfos[dev->minor].i_Offset = 64;
-				//END JK 06.07.04: Management of sevrals boards
-			}	//if(ui_ChannelNo >=4 && ui_ChannelNo <=7)
+				/* END JK 06.07.04: Management of sevrals boards */
+			}	/* if(ui_ChannelNo >=4 && ui_ChannelNo <=7) */
 			if (ui_ChannelNo >= 8 && ui_ChannelNo <= 11) {
-				//BEGIN JK 06.07.04: Management of sevrals boards
-				//i_Offset=128;
+				/* BEGIN JK 06.07.04: Management of sevrals boards */
+				/* i_Offset=128; */
 				s_BoardInfos[dev->minor].i_Offset = 128;
-				//END JK 06.07.04: Management of sevrals boards
-			}	//if(ui_ChannelNo >=8 && ui_ChannelNo <=11)
+				/* END JK 06.07.04: Management of sevrals boards */
+			}	/* if(ui_ChannelNo >=8 && ui_ChannelNo <=11) */
 			if (ui_ChannelNo >= 12 && ui_ChannelNo <= 15) {
-				//BEGIN JK 06.07.04: Management of sevrals boards
-				//i_Offset=192;
+				/* BEGIN JK 06.07.04: Management of sevrals boards */
+				/* i_Offset=192; */
 				s_BoardInfos[dev->minor].i_Offset = 192;
-				//END JK 06.07.04: Management of sevrals boards
-			}	//if(ui_ChannelNo >=12 && ui_ChannelNo <=15)
+				/* END JK 06.07.04: Management of sevrals boards */
+			}	/* if(ui_ChannelNo >=12 && ui_ChannelNo <=15) */
 			break;
 		case 1:
 			if (data[14] == 2) {
 				if (ui_ChannelNo == 0) {
-					//BEGIN JK 06.07.04: Management of sevrals boards
-					//i_Offset=0;
+					/* BEGIN JK 06.07.04: Management of sevrals boards */
+					/* i_Offset=0; */
 					s_BoardInfos[dev->minor].i_Offset = 0;
-					//END JK 06.07.04: Management of sevrals boards
-				}	//if(ui_ChannelNo ==0 )
+					/* END JK 06.07.04: Management of sevrals boards */
+				}	/* if(ui_ChannelNo ==0 ) */
 				if (ui_ChannelNo == 1) {
-					//BEGIN JK 06.07.04: Management of sevrals boards
-					//i_Offset=0;
+					/* BEGIN JK 06.07.04: Management of sevrals boards */
+					/* i_Offset=0; */
 					s_BoardInfos[dev->minor].i_Offset = 64;
-					//END JK 06.07.04: Management of sevrals boards
-				}	// if(ui_ChannelNo ==1)
+					/* END JK 06.07.04: Management of sevrals boards */
+				}	/*  if(ui_ChannelNo ==1) */
 				if (ui_ChannelNo == 2) {
-					//BEGIN JK 06.07.04: Management of sevrals boards
-					//i_Offset=128;
+					/* BEGIN JK 06.07.04: Management of sevrals boards */
+					/* i_Offset=128; */
 					s_BoardInfos[dev->minor].i_Offset = 128;
-					//END JK 06.07.04: Management of sevrals boards
-				}	//if(ui_ChannelNo ==2 )
+					/* END JK 06.07.04: Management of sevrals boards */
+				}	/* if(ui_ChannelNo ==2 ) */
 				if (ui_ChannelNo == 3) {
-					//BEGIN JK 06.07.04: Management of sevrals boards
-					//i_Offset=192;
+					/* BEGIN JK 06.07.04: Management of sevrals boards */
+					/* i_Offset=192; */
 					s_BoardInfos[dev->minor].i_Offset = 192;
-					//END JK 06.07.04: Management of sevrals boards
-				}	//if(ui_ChannelNo ==3)
+					/* END JK 06.07.04: Management of sevrals boards */
+				}	/* if(ui_ChannelNo ==3) */
 
-				//BEGIN JK 06.07.04: Management of sevrals boards
-				//i_ChannelNo=0;
+				/* BEGIN JK 06.07.04: Management of sevrals boards */
+				/* i_ChannelNo=0; */
 				s_BoardInfos[dev->minor].i_ChannelNo = 0;
-				//END JK 06.07.04: Management of sevrals boards
+				/* END JK 06.07.04: Management of sevrals boards */
 				ui_ChannelNo = 0;
 				break;
-			}	//if(data[14]==2)
+			}	/* if(data[14]==2) */
 			if (ui_ChannelNo >= 0 && ui_ChannelNo <= 1) {
-				//BEGIN JK 06.07.04: Management of sevrals boards
-				//i_Offset=0;
+				/* BEGIN JK 06.07.04: Management of sevrals boards */
+				/* i_Offset=0; */
 				s_BoardInfos[dev->minor].i_Offset = 0;
-				//END JK 06.07.04: Management of sevrals boards
-			}	//if(ui_ChannelNo >=0 && ui_ChannelNo <=1)
+				/* END JK 06.07.04: Management of sevrals boards */
+			}	/* if(ui_ChannelNo >=0 && ui_ChannelNo <=1) */
 			if (ui_ChannelNo >= 2 && ui_ChannelNo <= 3) {
-				//BEGIN JK 06.07.04: Management of sevrals boards
-				//i_ChannelNo=i_ChannelNo-2;
-				//i_Offset=64;
+				/* BEGIN JK 06.07.04: Management of sevrals boards */
+				/* i_ChannelNo=i_ChannelNo-2; */
+				/* i_Offset=64; */
 				s_BoardInfos[dev->minor].i_ChannelNo =
 					s_BoardInfos[dev->minor].i_ChannelNo -
 					2;
 				s_BoardInfos[dev->minor].i_Offset = 64;
-				//END JK 06.07.04: Management of sevrals boards
+				/* END JK 06.07.04: Management of sevrals boards */
 				ui_ChannelNo = ui_ChannelNo - 2;
-			}	//if(ui_ChannelNo >=2 && ui_ChannelNo <=3)
+			}	/* if(ui_ChannelNo >=2 && ui_ChannelNo <=3) */
 			if (ui_ChannelNo >= 4 && ui_ChannelNo <= 5) {
-				//BEGIN JK 06.07.04: Management of sevrals boards
-				//i_ChannelNo=i_ChannelNo-4;
-				//i_Offset=128;
+				/* BEGIN JK 06.07.04: Management of sevrals boards */
+				/* i_ChannelNo=i_ChannelNo-4; */
+				/* i_Offset=128; */
 				s_BoardInfos[dev->minor].i_ChannelNo =
 					s_BoardInfos[dev->minor].i_ChannelNo -
 					4;
 				s_BoardInfos[dev->minor].i_Offset = 128;
-				//END JK 06.07.04: Management of sevrals boards
+				/* END JK 06.07.04: Management of sevrals boards */
 				ui_ChannelNo = ui_ChannelNo - 4;
-			}	//if(ui_ChannelNo >=4 && ui_ChannelNo <=5)
+			}	/* if(ui_ChannelNo >=4 && ui_ChannelNo <=5) */
 			if (ui_ChannelNo >= 6 && ui_ChannelNo <= 7) {
-				//BEGIN JK 06.07.04: Management of sevrals boards
-				//i_ChannelNo=i_ChannelNo-6;
-				//i_Offset=192;
+				/* BEGIN JK 06.07.04: Management of sevrals boards */
+				/* i_ChannelNo=i_ChannelNo-6; */
+				/* i_Offset=192; */
 				s_BoardInfos[dev->minor].i_ChannelNo =
 					s_BoardInfos[dev->minor].i_ChannelNo -
 					6;
 				s_BoardInfos[dev->minor].i_Offset = 192;
-				//END JK 06.07.04: Management of sevrals boards
+				/* END JK 06.07.04: Management of sevrals boards */
 				ui_ChannelNo = ui_ChannelNo - 6;
-			}	//if(ui_ChannelNo >=6 && ui_ChannelNo <=7)
+			}	/* if(ui_ChannelNo >=6 && ui_ChannelNo <=7) */
 			break;
 
 		default:
 			printk("\n This selection of polarity does not exist\n");
 			i_err++;
-		}		//switch(data[2])
-	}			//if(data[12]==0 || data[12]==1)
+		}		/* switch(data[2]) */
+	}			/* if(data[12]==0 || data[12]==1) */
 	else {
 		switch (data[11]) {
 		case 1:
-			//BEGIN JK 06.07.04: Management of sevrals boards
-			//i_Offset=0;
+			/* BEGIN JK 06.07.04: Management of sevrals boards */
+			/* i_Offset=0; */
 			s_BoardInfos[dev->minor].i_Offset = 0;
-			//END JK 06.07.04: Management of sevrals boards
+			/* END JK 06.07.04: Management of sevrals boards */
 			break;
 		case 2:
-			//BEGIN JK 06.07.04: Management of sevrals boards
-			//i_Offset=64;
+			/* BEGIN JK 06.07.04: Management of sevrals boards */
+			/* i_Offset=64; */
 			s_BoardInfos[dev->minor].i_Offset = 64;
-			//END JK 06.07.04: Management of sevrals boards
+			/* END JK 06.07.04: Management of sevrals boards */
 			break;
 		case 3:
-			//BEGIN JK 06.07.04: Management of sevrals boards
-			//i_Offset=128;
+			/* BEGIN JK 06.07.04: Management of sevrals boards */
+			/* i_Offset=128; */
 			s_BoardInfos[dev->minor].i_Offset = 128;
-			//END JK 06.07.04: Management of sevrals boards
+			/* END JK 06.07.04: Management of sevrals boards */
 			break;
 		case 4:
-			//BEGIN JK 06.07.04: Management of sevrals boards
-			//i_Offset=192;
+			/* BEGIN JK 06.07.04: Management of sevrals boards */
+			/* i_Offset=192; */
 			s_BoardInfos[dev->minor].i_Offset = 192;
-			//END JK 06.07.04: Management of sevrals boards
+			/* END JK 06.07.04: Management of sevrals boards */
 			break;
 		default:
 			printk("\nError in module selection\n");
 			i_err++;
-		}		// switch(data[11])
-	}			// elseif(data[12]==0 || data[12]==1)
+		}		/*  switch(data[11]) */
+	}			/*  elseif(data[12]==0 || data[12]==1) */
 	if (i_err) {
 		i_APCI3200_Reset(dev);
 		return -EINVAL;
 	}
-	//if(i_ScanType!=1)
+	/* if(i_ScanType!=1) */
 	if (s_BoardInfos[dev->minor].i_ScanType != 1) {
-		//BEGIN JK 06.07.04: Management of sevrals boards
-		//i_Count=0;
-		//i_Sum=0;
+		/* BEGIN JK 06.07.04: Management of sevrals boards */
+		/* i_Count=0; */
+		/* i_Sum=0; */
 		s_BoardInfos[dev->minor].i_Count = 0;
 		s_BoardInfos[dev->minor].i_Sum = 0;
-		//END JK 06.07.04: Management of sevrals boards
-	}			//if(i_ScanType!=1)
+		/* END JK 06.07.04: Management of sevrals boards */
+	}			/* if(i_ScanType!=1) */
 
 	ul_Config =
 		data[1] | (data[2] << 6) | (data[5] << 7) | (data[3] << 8) |
 		(data[4] << 9);
-	//BEGIN JK 06.07.04: Management of sevrals boards
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* BEGIN JK 06.07.04: Management of sevrals boards */
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//END JK 06.07.04: Management of sevrals boards
+	/* END JK 06.07.04: Management of sevrals boards */
   /*********************************/
 	/* Write the channel to configure */
   /*********************************/
-	//BEGIN JK 06.07.04: Management of sevrals boards
-	//outl(0 | ui_ChannelNo , devpriv->iobase+i_Offset + 0x4);
+	/* BEGIN JK 06.07.04: Management of sevrals boards */
+	/* outl(0 | ui_ChannelNo , devpriv->iobase+i_Offset + 0x4); */
 	outl(0 | ui_ChannelNo,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x4);
-	//END JK 06.07.04: Management of sevrals boards
+	/* END JK 06.07.04: Management of sevrals boards */
 
-	//BEGIN JK 06.07.04: Management of sevrals boards
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* BEGIN JK 06.07.04: Management of sevrals boards */
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//END JK 06.07.04: Management of sevrals boards
+	/* END JK 06.07.04: Management of sevrals boards */
   /**************************/
 	/* Reset the configuration */
   /**************************/
-	//BEGIN JK 06.07.04: Management of sevrals boards
-	//outl(0 , devpriv->iobase+i_Offset + 0x0);
+	/* BEGIN JK 06.07.04: Management of sevrals boards */
+	/* outl(0 , devpriv->iobase+i_Offset + 0x0); */
 	outl(0, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x0);
-	//END JK 06.07.04: Management of sevrals boards
+	/* END JK 06.07.04: Management of sevrals boards */
 
-	//BEGIN JK 06.07.04: Management of sevrals boards
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* BEGIN JK 06.07.04: Management of sevrals boards */
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//END JK 06.07.04: Management of sevrals boards
+	/* END JK 06.07.04: Management of sevrals boards */
 
   /***************************/
 	/* Write the configuration */
   /***************************/
-	//BEGIN JK 06.07.04: Management of sevrals boards
-	//outl(ul_Config , devpriv->iobase+i_Offset + 0x0);
+	/* BEGIN JK 06.07.04: Management of sevrals boards */
+	/* outl(ul_Config , devpriv->iobase+i_Offset + 0x0); */
 	outl(ul_Config,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x0);
-	//END JK 06.07.04: Management of sevrals boards
+	/* END JK 06.07.04: Management of sevrals boards */
 
   /***************************/
 	/*Reset the calibration bit */
   /***************************/
-	//BEGIN JK 06.07.04: Management of sevrals boards
-	//ul_Temp = inl(devpriv->iobase+i_Offset + 12);
+	/* BEGIN JK 06.07.04: Management of sevrals boards */
+	/* ul_Temp = inl(devpriv->iobase+i_Offset + 12); */
 	ul_Temp = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
-	//END JK 06.07.04: Management of sevrals boards
+	/* END JK 06.07.04: Management of sevrals boards */
 
-	//BEGIN JK 06.07.04: Management of sevrals boards
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* BEGIN JK 06.07.04: Management of sevrals boards */
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//END JK 06.07.04: Management of sevrals boards
+	/* END JK 06.07.04: Management of sevrals boards */
 
-	//BEGIN JK 06.07.04: Management of sevrals boards
-	//outl((ul_Temp & 0xFFF9FFFF) , devpriv->iobase+.i_Offset + 12);
+	/* BEGIN JK 06.07.04: Management of sevrals boards */
+	/* outl((ul_Temp & 0xFFF9FFFF) , devpriv->iobase+.i_Offset + 12); */
 	outl((ul_Temp & 0xFFF9FFFF),
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
-	//END JK 06.07.04: Management of sevrals boards
+	/* END JK 06.07.04: Management of sevrals boards */
 
 	if (data[9] == 1) {
 		devpriv->tsk_Current = current;
-		//BEGIN JK 06.07.04: Management of sevrals boards
-		//i_InterruptFlag=1;
+		/* BEGIN JK 06.07.04: Management of sevrals boards */
+		/* i_InterruptFlag=1; */
 		s_BoardInfos[dev->minor].i_InterruptFlag = 1;
-		//END JK 06.07.04: Management of sevrals boards
-	}			// if(data[9]==1)
+		/* END JK 06.07.04: Management of sevrals boards */
+	}			/*  if(data[9]==1) */
 	else {
-		//BEGIN JK 06.07.04: Management of sevrals boards
-		//i_InterruptFlag=0;
+		/* BEGIN JK 06.07.04: Management of sevrals boards */
+		/* i_InterruptFlag=0; */
 		s_BoardInfos[dev->minor].i_InterruptFlag = 0;
-		//END JK 06.07.04: Management of sevrals boards
-	}			//else  if(data[9]==1)
+		/* END JK 06.07.04: Management of sevrals boards */
+	}			/* else  if(data[9]==1) */
 
-	//BEGIN JK 06.07.04: Management of sevrals boards
-	//i_Initialised=1;
+	/* BEGIN JK 06.07.04: Management of sevrals boards */
+	/* i_Initialised=1; */
 	s_BoardInfos[dev->minor].i_Initialised = 1;
-	//END JK 06.07.04: Management of sevrals boards
+	/* END JK 06.07.04: Management of sevrals boards */
 
-	//BEGIN JK 06.07.04: Management of sevrals boards
-	//if(i_ScanType==1)
+	/* BEGIN JK 06.07.04: Management of sevrals boards */
+	/* if(i_ScanType==1) */
 	if (s_BoardInfos[dev->minor].i_ScanType == 1)
-		//END JK 06.07.04: Management of sevrals boards
+		/* END JK 06.07.04: Management of sevrals boards */
 	{
-		//BEGIN JK 06.07.04: Management of sevrals boards
-		//i_Sum=i_Sum+1;
+		/* BEGIN JK 06.07.04: Management of sevrals boards */
+		/* i_Sum=i_Sum+1; */
 		s_BoardInfos[dev->minor].i_Sum =
 			s_BoardInfos[dev->minor].i_Sum + 1;
-		//END JK 06.07.04: Management of sevrals boards
+		/* END JK 06.07.04: Management of sevrals boards */
 
 		insn->unused[0] = 0;
 		i_APCI3200_ReadAnalogInput(dev, s, insn, &ui_Dummy);
@@ -1340,8 +1333,8 @@ INT i_APCI3200_ConfigAnalogInput(struct comedi_device * dev, struct comedi_subde
   | Task              : Read  value  of the selected channel			         |
   +----------------------------------------------------------------------------+
   | Input Parameters  : struct comedi_device *dev      : Driver handle                |
-  |                     UINT ui_NoOfChannels    : No Of Channels To read       |
-  |                     UINT *data              : Data Pointer to read status  |
+  |                     unsigned int ui_NoOfChannels    : No Of Channels To read       |
+  |                     unsigned int *data              : Data Pointer to read status  |
   +----------------------------------------------------------------------------+
   | Output Parameters :	--													 |
   |				data[0]  : Digital Value Of Input             |
@@ -1361,21 +1354,21 @@ INT i_APCI3200_ConfigAnalogInput(struct comedi_device * dev, struct comedi_subde
   |			                                                         |
   +----------------------------------------------------------------------------+
 */
-INT i_APCI3200_ReadAnalogInput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI3200_ReadAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_DummyValue = 0;
+	unsigned int ui_DummyValue = 0;
 	int i_ConvertCJCCalibration;
 	int i = 0;
 
-	//BEGIN JK 06.07.04: Management of sevrals boards
-	//if(i_Initialised==0)
+	/* BEGIN JK 06.07.04: Management of sevrals boards */
+	/* if(i_Initialised==0) */
 	if (s_BoardInfos[dev->minor].i_Initialised == 0)
-		//END JK 06.07.04: Management of sevrals boards
+		/* END JK 06.07.04: Management of sevrals boards */
 	{
 		i_APCI3200_Reset(dev);
 		return -EINVAL;
-	}			//if(i_Initialised==0);
+	}			/* if(i_Initialised==0); */
 
 #ifdef PRINT_INFO
 	printk("\n insn->unused[0] = %i", insn->unused[0]);
@@ -1386,14 +1379,14 @@ INT i_APCI3200_ReadAnalogInput(struct comedi_device * dev, struct comedi_subdevi
 
 		i_APCI3200_Read1AnalogInputChannel(dev, s, insn,
 			&ui_DummyValue);
-		//BEGIN JK 06.07.04: Management of sevrals boards
-		//ui_InterruptChannelValue[i_Count+0]=ui_DummyValue;
+		/* BEGIN JK 06.07.04: Management of sevrals boards */
+		/* ui_InterruptChannelValue[i_Count+0]=ui_DummyValue; */
 		s_BoardInfos[dev->minor].
 			ui_InterruptChannelValue[s_BoardInfos[dev->minor].
 			i_Count + 0] = ui_DummyValue;
-		//END JK 06.07.04: Management of sevrals boards
+		/* END JK 06.07.04: Management of sevrals boards */
 
-		//Begin JK 25.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+		/* Begin JK 25.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 		i_APCI3200_GetChannelCalibrationValue(dev,
 			s_BoardInfos[dev->minor].ui_Channel_num,
 			&s_BoardInfos[dev->minor].
@@ -1414,62 +1407,62 @@ INT i_APCI3200_ReadAnalogInput(struct comedi_device * dev, struct comedi_subdevi
 		printk("\n s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count+8] = %lu", s_BoardInfos[dev->minor].ui_InterruptChannelValue[s_BoardInfos[dev->minor].i_Count + 8]);
 #endif
 
-		//End JK 25.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+		/* End JK 25.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 
-		//BEGIN JK 06.07.04: Management of sevrals boards
-		//if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE) && (i_CJCAvailable==1))
+		/* BEGIN JK 06.07.04: Management of sevrals boards */
+		/* if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE) && (i_CJCAvailable==1)) */
 		if ((s_BoardInfos[dev->minor].i_ADDIDATAType == 2)
 			&& (s_BoardInfos[dev->minor].i_InterruptFlag == FALSE)
 			&& (s_BoardInfos[dev->minor].i_CJCAvailable == 1))
-			//END JK 06.07.04: Management of sevrals boards
+			/* END JK 06.07.04: Management of sevrals boards */
 		{
 			i_APCI3200_ReadCJCValue(dev, &ui_DummyValue);
-			//BEGIN JK 06.07.04: Management of sevrals boards
-			//ui_InterruptChannelValue[i_Count + 3]=ui_DummyValue;
+			/* BEGIN JK 06.07.04: Management of sevrals boards */
+			/* ui_InterruptChannelValue[i_Count + 3]=ui_DummyValue; */
 			s_BoardInfos[dev->minor].
 				ui_InterruptChannelValue[s_BoardInfos[dev->
 					minor].i_Count + 3] = ui_DummyValue;
-			//END JK 06.07.04: Management of sevrals boards
-		}		//if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE))
+			/* END JK 06.07.04: Management of sevrals boards */
+		}		/* if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE)) */
 		else {
-			//BEGIN JK 06.07.04: Management of sevrals boards
-			//ui_InterruptChannelValue[i_Count + 3]=0;
+			/* BEGIN JK 06.07.04: Management of sevrals boards */
+			/* ui_InterruptChannelValue[i_Count + 3]=0; */
 			s_BoardInfos[dev->minor].
 				ui_InterruptChannelValue[s_BoardInfos[dev->
 					minor].i_Count + 3] = 0;
-			//END JK 06.07.04: Management of sevrals boards
-		}		//elseif((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE) && (i_CJCAvailable==1))
+			/* END JK 06.07.04: Management of sevrals boards */
+		}		/* elseif((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE) && (i_CJCAvailable==1)) */
 
-		//BEGIN JK 06.07.04: Management of sevrals boards
-		//if (( i_AutoCalibration == FALSE) && (i_InterruptFlag == FALSE))
+		/* BEGIN JK 06.07.04: Management of sevrals boards */
+		/* if (( i_AutoCalibration == FALSE) && (i_InterruptFlag == FALSE)) */
 		if ((s_BoardInfos[dev->minor].i_AutoCalibration == FALSE)
 			&& (s_BoardInfos[dev->minor].i_InterruptFlag == FALSE))
-			//END JK 06.07.04: Management of sevrals boards
+			/* END JK 06.07.04: Management of sevrals boards */
 		{
 			i_APCI3200_ReadCalibrationOffsetValue(dev,
 				&ui_DummyValue);
-			//BEGIN JK 06.07.04: Management of sevrals boards
-			//ui_InterruptChannelValue[i_Count + 1]=ui_DummyValue;
+			/* BEGIN JK 06.07.04: Management of sevrals boards */
+			/* ui_InterruptChannelValue[i_Count + 1]=ui_DummyValue; */
 			s_BoardInfos[dev->minor].
 				ui_InterruptChannelValue[s_BoardInfos[dev->
 					minor].i_Count + 1] = ui_DummyValue;
-			//END JK 06.07.04: Management of sevrals boards
+			/* END JK 06.07.04: Management of sevrals boards */
 			i_APCI3200_ReadCalibrationGainValue(dev,
 				&ui_DummyValue);
-			//BEGIN JK 06.07.04: Management of sevrals boards
-			//ui_InterruptChannelValue[i_Count + 2]=ui_DummyValue;
+			/* BEGIN JK 06.07.04: Management of sevrals boards */
+			/* ui_InterruptChannelValue[i_Count + 2]=ui_DummyValue; */
 			s_BoardInfos[dev->minor].
 				ui_InterruptChannelValue[s_BoardInfos[dev->
 					minor].i_Count + 2] = ui_DummyValue;
-			//END JK 06.07.04: Management of sevrals boards
-		}		//if (( i_AutoCalibration == FALSE) && (i_InterruptFlag == FALSE))
+			/* END JK 06.07.04: Management of sevrals boards */
+		}		/* if (( i_AutoCalibration == FALSE) && (i_InterruptFlag == FALSE)) */
 
-		//BEGIN JK 06.07.04: Management of sevrals boards
-		//if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE)&& (i_CJCAvailable==1))
+		/* BEGIN JK 06.07.04: Management of sevrals boards */
+		/* if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE)&& (i_CJCAvailable==1)) */
 		if ((s_BoardInfos[dev->minor].i_ADDIDATAType == 2)
 			&& (s_BoardInfos[dev->minor].i_InterruptFlag == FALSE)
 			&& (s_BoardInfos[dev->minor].i_CJCAvailable == 1))
-			//END JK 06.07.04: Management of sevrals boards
+			/* END JK 06.07.04: Management of sevrals boards */
 		{
 	  /**********************************************************/
 			/*Test if the Calibration channel must be read for the CJC */
@@ -1477,52 +1470,52 @@ INT i_APCI3200_ReadAnalogInput(struct comedi_device * dev, struct comedi_subdevi
 	  /**********************************/
 			/*Test if the polarity is the same */
 	  /**********************************/
-			//BEGIN JK 06.07.04: Management of sevrals boards
-			//if(i_CJCPolarity!=i_ADDIDATAPolarity)
+			/* BEGIN JK 06.07.04: Management of sevrals boards */
+			/* if(i_CJCPolarity!=i_ADDIDATAPolarity) */
 			if (s_BoardInfos[dev->minor].i_CJCPolarity !=
 				s_BoardInfos[dev->minor].i_ADDIDATAPolarity)
-				//END JK 06.07.04: Management of sevrals boards
+				/* END JK 06.07.04: Management of sevrals boards */
 			{
 				i_ConvertCJCCalibration = 1;
-			}	//if(i_CJCPolarity!=i_ADDIDATAPolarity)
+			}	/* if(i_CJCPolarity!=i_ADDIDATAPolarity) */
 			else {
-				//BEGIN JK 06.07.04: Management of sevrals boards
-				//if(i_CJCGain==i_ADDIDATAGain)
+				/* BEGIN JK 06.07.04: Management of sevrals boards */
+				/* if(i_CJCGain==i_ADDIDATAGain) */
 				if (s_BoardInfos[dev->minor].i_CJCGain ==
 					s_BoardInfos[dev->minor].i_ADDIDATAGain)
-					//END JK 06.07.04: Management of sevrals boards
+					/* END JK 06.07.04: Management of sevrals boards */
 				{
 					i_ConvertCJCCalibration = 0;
-				}	//if(i_CJCGain==i_ADDIDATAGain)
+				}	/* if(i_CJCGain==i_ADDIDATAGain) */
 				else {
 					i_ConvertCJCCalibration = 1;
-				}	//elseif(i_CJCGain==i_ADDIDATAGain)
-			}	//elseif(i_CJCPolarity!=i_ADDIDATAPolarity)
+				}	/* elseif(i_CJCGain==i_ADDIDATAGain) */
+			}	/* elseif(i_CJCPolarity!=i_ADDIDATAPolarity) */
 			if (i_ConvertCJCCalibration == 1) {
 				i_APCI3200_ReadCJCCalOffset(dev,
 					&ui_DummyValue);
-				//BEGIN JK 06.07.04: Management of sevrals boards
-				//ui_InterruptChannelValue[i_Count+4]=ui_DummyValue;
+				/* BEGIN JK 06.07.04: Management of sevrals boards */
+				/* ui_InterruptChannelValue[i_Count+4]=ui_DummyValue; */
 				s_BoardInfos[dev->minor].
 					ui_InterruptChannelValue[s_BoardInfos
 					[dev->minor].i_Count + 4] =
 					ui_DummyValue;
-				//END JK 06.07.04: Management of sevrals boards
+				/* END JK 06.07.04: Management of sevrals boards */
 
 				i_APCI3200_ReadCJCCalGain(dev, &ui_DummyValue);
 
-				//BEGIN JK 06.07.04: Management of sevrals boards
-				//ui_InterruptChannelValue[i_Count+5]=ui_DummyValue;
+				/* BEGIN JK 06.07.04: Management of sevrals boards */
+				/* ui_InterruptChannelValue[i_Count+5]=ui_DummyValue; */
 				s_BoardInfos[dev->minor].
 					ui_InterruptChannelValue[s_BoardInfos
 					[dev->minor].i_Count + 5] =
 					ui_DummyValue;
-				//END JK 06.07.04: Management of sevrals boards
-			}	//if(i_ConvertCJCCalibration==1)
+				/* END JK 06.07.04: Management of sevrals boards */
+			}	/* if(i_ConvertCJCCalibration==1) */
 			else {
-				//BEGIN JK 06.07.04: Management of sevrals boards
-				//ui_InterruptChannelValue[i_Count+4]=0;
-				//ui_InterruptChannelValue[i_Count+5]=0;
+				/* BEGIN JK 06.07.04: Management of sevrals boards */
+				/* ui_InterruptChannelValue[i_Count+4]=0; */
+				/* ui_InterruptChannelValue[i_Count+5]=0; */
 
 				s_BoardInfos[dev->minor].
 					ui_InterruptChannelValue[s_BoardInfos
@@ -1530,36 +1523,36 @@ INT i_APCI3200_ReadAnalogInput(struct comedi_device * dev, struct comedi_subdevi
 				s_BoardInfos[dev->minor].
 					ui_InterruptChannelValue[s_BoardInfos
 					[dev->minor].i_Count + 5] = 0;
-				//END JK 06.07.04: Management of sevrals boards
-			}	//elseif(i_ConvertCJCCalibration==1)
-		}		//if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE))
+				/* END JK 06.07.04: Management of sevrals boards */
+			}	/* elseif(i_ConvertCJCCalibration==1) */
+		}		/* if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE)) */
 
-		//BEGIN JK 06.07.04: Management of sevrals boards
-		//if(i_ScanType!=1)
+		/* BEGIN JK 06.07.04: Management of sevrals boards */
+		/* if(i_ScanType!=1) */
 		if (s_BoardInfos[dev->minor].i_ScanType != 1) {
-			//i_Count=0;
+			/* i_Count=0; */
 			s_BoardInfos[dev->minor].i_Count = 0;
-		}		//if(i_ScanType!=1)
+		}		/* if(i_ScanType!=1) */
 		else {
-			//i_Count=i_Count +6;
-			//Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
-			//s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count +6;
+			/* i_Count=i_Count +6; */
+			/* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+			/* s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count +6; */
 			s_BoardInfos[dev->minor].i_Count =
 				s_BoardInfos[dev->minor].i_Count + 9;
-			//End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
-		}		//else if(i_ScanType!=1)
+			/* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+		}		/* else if(i_ScanType!=1) */
 
-		//if((i_ScanType==1) &&(i_InterruptFlag==1))
+		/* if((i_ScanType==1) &&(i_InterruptFlag==1)) */
 		if ((s_BoardInfos[dev->minor].i_ScanType == 1)
 			&& (s_BoardInfos[dev->minor].i_InterruptFlag == 1)) {
-			//i_Count=i_Count-6;
-			//Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
-			//s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count-6;
+			/* i_Count=i_Count-6; */
+			/* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+			/* s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count-6; */
 			s_BoardInfos[dev->minor].i_Count =
 				s_BoardInfos[dev->minor].i_Count - 9;
-			//End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+			/* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 		}
-		//if(i_ScanType==0)
+		/* if(i_ScanType==0) */
 		if (s_BoardInfos[dev->minor].i_ScanType == 0) {
 			/*
 			   data[0]= ui_InterruptChannelValue[0];
@@ -1591,41 +1584,41 @@ INT i_APCI3200_ReadAnalogInput(struct comedi_device * dev, struct comedi_subdevi
 				s_BoardInfos[dev->minor].
 				ui_InterruptChannelValue[5];
 
-			//Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
-			//printk("\n 0 - i_APCI3200_GetChannelCalibrationValue data [6] = %lu, data [7] = %lu, data [8] = %lu", data [6], data [7], data [8]);
+			/* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+			/* printk("\n 0 - i_APCI3200_GetChannelCalibrationValue data [6] = %lu, data [7] = %lu, data [8] = %lu", data [6], data [7], data [8]); */
 			i_APCI3200_GetChannelCalibrationValue(dev,
 				s_BoardInfos[dev->minor].ui_Channel_num,
 				&data[6], &data[7], &data[8]);
-			//End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+			/* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 		}
 		break;
 	case 1:
 
 		for (i = 0; i < insn->n; i++) {
-			//data[i]=ui_InterruptChannelValue[i];
+			/* data[i]=ui_InterruptChannelValue[i]; */
 			data[i] =
 				s_BoardInfos[dev->minor].
 				ui_InterruptChannelValue[i];
 		}
 
-		//i_Count=0;
-		//i_Sum=0;
-		//if(i_ScanType==1)
+		/* i_Count=0; */
+		/* i_Sum=0; */
+		/* if(i_ScanType==1) */
 		s_BoardInfos[dev->minor].i_Count = 0;
 		s_BoardInfos[dev->minor].i_Sum = 0;
 		if (s_BoardInfos[dev->minor].i_ScanType == 1) {
-			//i_Initialised=0;
-			//i_InterruptFlag=0;
+			/* i_Initialised=0; */
+			/* i_InterruptFlag=0; */
 			s_BoardInfos[dev->minor].i_Initialised = 0;
 			s_BoardInfos[dev->minor].i_InterruptFlag = 0;
-			//END JK 06.07.04: Management of sevrals boards
+			/* END JK 06.07.04: Management of sevrals boards */
 		}
 		break;
 	default:
 		printk("\nThe parameters passed are in error\n");
 		i_APCI3200_Reset(dev);
 		return -EINVAL;
-	}			//switch(insn->unused[0])
+	}			/* switch(insn->unused[0]) */
 
 	return insn->n;
 }
@@ -1639,8 +1632,8 @@ INT i_APCI3200_ReadAnalogInput(struct comedi_device * dev, struct comedi_subdevi
   | Task              : Read  value  of the selected channel			         |
   +----------------------------------------------------------------------------+
   | Input Parameters  : struct comedi_device *dev      : Driver handle                |
-  |                     UINT ui_NoOfChannel    : Channel No to read            |
-  |                     UINT *data              : Data Pointer to read status  |
+  |                     unsigned int ui_NoOfChannel    : Channel No to read            |
+  |                     unsigned int *data              : Data Pointer to read status  |
   +----------------------------------------------------------------------------+
   | Output Parameters :	--													 |
   |			          data[0]  : Digital Value read                   |
@@ -1651,49 +1644,49 @@ INT i_APCI3200_ReadAnalogInput(struct comedi_device * dev, struct comedi_subdevi
   |			                                                         |
   +----------------------------------------------------------------------------+
 */
-INT i_APCI3200_Read1AnalogInputChannel(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI3200_Read1AnalogInputChannel(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_EOC = 0;
-	UINT ui_ChannelNo = 0;
-	UINT ui_CommandRegister = 0;
+	unsigned int ui_EOC = 0;
+	unsigned int ui_ChannelNo = 0;
+	unsigned int ui_CommandRegister = 0;
 
-	//BEGIN JK 06.07.04: Management of sevrals boards
-	//ui_ChannelNo=i_ChannelNo;
+	/* BEGIN JK 06.07.04: Management of sevrals boards */
+	/* ui_ChannelNo=i_ChannelNo; */
 	ui_ChannelNo = s_BoardInfos[dev->minor].i_ChannelNo;
 
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
   /*********************************/
 	/* Write the channel to configure */
   /*********************************/
-	//Begin JK 20.10.2004: Bad channel value is used when using differential mode
-	//outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4);
-	//outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4);
+	/* Begin JK 20.10.2004: Bad channel value is used when using differential mode */
+	/* outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4); */
+	/* outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4); */
 	outl(0 | s_BoardInfos[dev->minor].i_ChannelNo,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x4);
-	//End JK 20.10.2004: Bad channel value is used when using differential mode
+	/* End JK 20.10.2004: Bad channel value is used when using differential mode */
 
   /*******************************/
 	/* Set the convert timing unit */
   /*******************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
 
-	//outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36);
+	/* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
 	outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
 
   /**************************/
 	/* Set the convert timing */
   /**************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
 
-	//outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32);
+	/* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
 	outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
 
@@ -1707,36 +1700,36 @@ INT i_APCI3200_Read1AnalogInputChannel(struct comedi_device * dev,
 	/*Test if the interrupt is enable */
   /*********************************/
 
-	//if (i_InterruptFlag == ADDIDATA_ENABLE)
+	/* if (i_InterruptFlag == ADDIDATA_ENABLE) */
 	if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {
       /************************/
 		/* Enable the interrupt */
       /************************/
 		ui_CommandRegister = ui_CommandRegister | 0x00100000;
-	}			//if (i_InterruptFlag == ADDIDATA_ENABLE)
+	}			/* if (i_InterruptFlag == ADDIDATA_ENABLE) */
 
   /******************************/
 	/* Write the command register */
   /******************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
 
-	//outl(ui_CommandRegister, devpriv->iobase+i_Offset + 8);
+	/* outl(ui_CommandRegister, devpriv->iobase+i_Offset + 8); */
 	outl(ui_CommandRegister,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
 
   /*****************************/
 	/*Test if interrupt is enable */
   /*****************************/
-	//if (i_InterruptFlag == ADDIDATA_DISABLE)
+	/* if (i_InterruptFlag == ADDIDATA_DISABLE) */
 	if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {
 		do {
 	  /*************************/
 			/*Read the EOC Status bit */
 	  /*************************/
 
-			//ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1;
+			/* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */
 			ui_EOC = inl(devpriv->iobase +
 				s_BoardInfos[dev->minor].i_Offset + 20) & 1;
 
@@ -1746,13 +1739,13 @@ INT i_APCI3200_Read1AnalogInputChannel(struct comedi_device * dev,
 		/* Read the digital value of the input */
       /***************************************/
 
-		//data[0] = inl (devpriv->iobase+i_Offset + 28);
+		/* data[0] = inl (devpriv->iobase+i_Offset + 28); */
 		data[0] =
 			inl(devpriv->iobase +
 			s_BoardInfos[dev->minor].i_Offset + 28);
-		//END JK 06.07.04: Management of sevrals boards
+		/* END JK 06.07.04: Management of sevrals boards */
 
-	}			// if (i_InterruptFlag == ADDIDATA_DISABLE)
+	}			/*  if (i_InterruptFlag == ADDIDATA_DISABLE) */
 	return 0;
 }
 
@@ -1765,7 +1758,7 @@ INT i_APCI3200_Read1AnalogInputChannel(struct comedi_device * dev,
   | Task              : Read calibration offset  value  of the selected channel|
   +----------------------------------------------------------------------------+
   | Input Parameters  : struct comedi_device *dev      : Driver handle                |
-  |                     UINT *data              : Data Pointer to read status  |
+  |                     unsigned int *data              : Data Pointer to read status  |
   +----------------------------------------------------------------------------+
   | Output Parameters :	--													 |
   |			          data[0]  : Calibration offset Value   |
@@ -1776,54 +1769,54 @@ INT i_APCI3200_Read1AnalogInputChannel(struct comedi_device * dev,
   |			                                                         |
   +----------------------------------------------------------------------------+
 */
-int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device * dev, UINT * data)
+int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device *dev, unsigned int *data)
 {
-	UINT ui_Temp = 0, ui_EOC = 0;
-	UINT ui_CommandRegister = 0;
+	unsigned int ui_Temp = 0, ui_EOC = 0;
+	unsigned int ui_CommandRegister = 0;
 
-	//BEGIN JK 06.07.04: Management of sevrals boards
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* BEGIN JK 06.07.04: Management of sevrals boards */
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
   /*********************************/
 	/* Write the channel to configure */
   /*********************************/
-	//Begin JK 20.10.2004: This seems not necessary !
-	//outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4);
-	//outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4);
-	//End JK 20.10.2004: This seems not necessary !
+	/* Begin JK 20.10.2004: This seems not necessary ! */
+	/* outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4); */
+	/* outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4); */
+	/* End JK 20.10.2004: This seems not necessary ! */
 
   /*******************************/
 	/* Set the convert timing unit */
   /*******************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36);
+	/* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
 	outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
   /**************************/
 	/* Set the convert timing */
   /**************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32);
+	/* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
 	outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
   /*****************************/
 	/*Read the calibration offset */
   /*****************************/
-	//ui_Temp = inl(devpriv->iobase+i_Offset + 12);
+	/* ui_Temp = inl(devpriv->iobase+i_Offset + 12); */
 	ui_Temp = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
 
   /*********************************/
 	/*Configure the Offset Conversion */
   /*********************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//outl((ui_Temp | 0x00020000), devpriv->iobase+i_Offset + 12);
+	/* outl((ui_Temp | 0x00020000), devpriv->iobase+i_Offset + 12); */
 	outl((ui_Temp | 0x00020000),
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
   /*******************************/
@@ -1836,7 +1829,7 @@ int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device * dev, UINT * dat
 	/*Test if the interrupt is enable */
   /*********************************/
 
-	//if (i_InterruptFlag == ADDIDATA_ENABLE)
+	/* if (i_InterruptFlag == ADDIDATA_ENABLE) */
 	if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {
 
       /**********************/
@@ -1845,7 +1838,7 @@ int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device * dev, UINT * dat
 
 		ui_CommandRegister = ui_CommandRegister | 0x00100000;
 
-	}			//if (i_InterruptFlag == ADDIDATA_ENABLE)
+	}			/* if (i_InterruptFlag == ADDIDATA_ENABLE) */
 
   /**********************/
 	/*Start the conversion */
@@ -1855,10 +1848,10 @@ int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device * dev, UINT * dat
   /***************************/
 	/*Write the command regiter */
   /***************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//outl(ui_CommandRegister, devpriv->iobase+i_Offset + 8);
+	/* outl(ui_CommandRegister, devpriv->iobase+i_Offset + 8); */
 	outl(ui_CommandRegister,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
 
@@ -1866,7 +1859,7 @@ int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device * dev, UINT * dat
 	/*Test if interrupt is enable */
   /*****************************/
 
-	//if (i_InterruptFlag == ADDIDATA_DISABLE)
+	/* if (i_InterruptFlag == ADDIDATA_DISABLE) */
 	if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {
 
 		do {
@@ -1874,7 +1867,7 @@ int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device * dev, UINT * dat
 			/*Read the EOC flag */
 	  /*******************/
 
-			//ui_EOC = inl (devpriv->iobase+i_Offset + 20) & 1;
+			/* ui_EOC = inl (devpriv->iobase+i_Offset + 20) & 1; */
 			ui_EOC = inl(devpriv->iobase +
 				s_BoardInfos[dev->minor].i_Offset + 20) & 1;
 
@@ -1884,11 +1877,11 @@ int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device * dev, UINT * dat
 		/*Read the digital value of the calibration Offset */
       /**************************************************/
 
-		//data[0] = inl(devpriv->iobase+i_Offset+ 28);
+		/* data[0] = inl(devpriv->iobase+i_Offset+ 28); */
 		data[0] =
 			inl(devpriv->iobase +
 			s_BoardInfos[dev->minor].i_Offset + 28);
-	}			//if (i_InterruptFlag == ADDIDATA_DISABLE)
+	}			/* if (i_InterruptFlag == ADDIDATA_DISABLE) */
 	return 0;
 }
 
@@ -1901,7 +1894,7 @@ int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device * dev, UINT * dat
   | Task              : Read calibration gain  value  of the selected channel  |
   +----------------------------------------------------------------------------+
   | Input Parameters  : struct comedi_device *dev      : Driver handle                |
-  |                     UINT *data              : Data Pointer to read status  |
+  |                     unsigned int *data              : Data Pointer to read status  |
   +----------------------------------------------------------------------------+
   | Output Parameters :	--													 |
   |			          data[0]  : Calibration gain Value Of Input     |
@@ -1912,21 +1905,21 @@ int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device * dev, UINT * dat
   |			                                                         |
   +----------------------------------------------------------------------------+
 */
-int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, UINT * data)
+int i_APCI3200_ReadCalibrationGainValue(struct comedi_device *dev, unsigned int *data)
 {
-	UINT ui_EOC = 0;
-	INT ui_CommandRegister = 0;
+	unsigned int ui_EOC = 0;
+	int ui_CommandRegister = 0;
 
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
   /*********************************/
 	/* Write the channel to configure */
   /*********************************/
-	//Begin JK 20.10.2004: This seems not necessary !
-	//outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4);
-	//outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4);
-	//End JK 20.10.2004: This seems not necessary !
+	/* Begin JK 20.10.2004: This seems not necessary ! */
+	/* outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4); */
+	/* outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4); */
+	/* End JK 20.10.2004: This seems not necessary ! */
 
   /***************************/
 	/*Read the calibration gain */
@@ -1934,28 +1927,28 @@ int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, UINT * data)
   /*******************************/
 	/* Set the convert timing unit */
   /*******************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36);
+	/* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
 	outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
   /**************************/
 	/* Set the convert timing */
   /**************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32);
+	/* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
 	outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
   /*******************************/
 	/*Configure the Gain Conversion */
   /*******************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//outl(0x00040000 , devpriv->iobase+i_Offset + 12);
+	/* outl(0x00040000 , devpriv->iobase+i_Offset + 12); */
 	outl(0x00040000,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
 
@@ -1969,7 +1962,7 @@ int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, UINT * data)
 	/*Test if the interrupt is enable */
   /*********************************/
 
-	//if (i_InterruptFlag == ADDIDATA_ENABLE)
+	/* if (i_InterruptFlag == ADDIDATA_ENABLE) */
 	if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {
 
       /**********************/
@@ -1978,7 +1971,7 @@ int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, UINT * data)
 
 		ui_CommandRegister = ui_CommandRegister | 0x00100000;
 
-	}			//if (i_InterruptFlag == ADDIDATA_ENABLE)
+	}			/* if (i_InterruptFlag == ADDIDATA_ENABLE) */
 
   /**********************/
 	/*Start the conversion */
@@ -1988,10 +1981,10 @@ int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, UINT * data)
   /***************************/
 	/*Write the command regiter */
   /***************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//outl(ui_CommandRegister , devpriv->iobase+i_Offset + 8);
+	/* outl(ui_CommandRegister , devpriv->iobase+i_Offset + 8); */
 	outl(ui_CommandRegister,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
 
@@ -1999,7 +1992,7 @@ int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, UINT * data)
 	/*Test if interrupt is enable */
   /*****************************/
 
-	//if (i_InterruptFlag == ADDIDATA_DISABLE)
+	/* if (i_InterruptFlag == ADDIDATA_DISABLE) */
 	if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {
 
 		do {
@@ -2008,7 +2001,7 @@ int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, UINT * data)
 			/*Read the EOC flag */
 	  /*******************/
 
-			//ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1;
+			/* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */
 			ui_EOC = inl(devpriv->iobase +
 				s_BoardInfos[dev->minor].i_Offset + 20) & 1;
 
@@ -2018,12 +2011,12 @@ int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, UINT * data)
 		/*Read the digital value of the calibration Gain */
       /************************************************/
 
-		//data[0] = inl(devpriv->iobase+i_Offset + 28);
+		/* data[0] = inl(devpriv->iobase+i_Offset + 28); */
 		data[0] =
 			inl(devpriv->iobase +
 			s_BoardInfos[dev->minor].i_Offset + 28);
 
-	}			//if (i_InterruptFlag == ADDIDATA_DISABLE)
+	}			/* if (i_InterruptFlag == ADDIDATA_DISABLE) */
 	return 0;
 }
 
@@ -2036,7 +2029,7 @@ int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, UINT * data)
   | Task              : Read CJC  value  of the selected channel               |
   +----------------------------------------------------------------------------+
   | Input Parameters  : struct comedi_device *dev      : Driver handle                |
-  |                     UINT *data              : Data Pointer to read status  |
+  |                     unsigned int *data              : Data Pointer to read status  |
   +----------------------------------------------------------------------------+
   | Output Parameters :	--													 |
   |			          data[0]  : CJC Value                           |
@@ -2048,41 +2041,41 @@ int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, UINT * data)
   +----------------------------------------------------------------------------+
 */
 
-int i_APCI3200_ReadCJCValue(struct comedi_device * dev, unsigned int * data)
+int i_APCI3200_ReadCJCValue(struct comedi_device *dev, unsigned int *data)
 {
-	UINT ui_EOC = 0;
-	INT ui_CommandRegister = 0;
+	unsigned int ui_EOC = 0;
+	int ui_CommandRegister = 0;
 
   /******************************/
 	/*Set the converting time unit */
   /******************************/
 
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
 
-	//outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36);
+	/* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
 	outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
   /**************************/
 	/* Set the convert timing */
   /**************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
 
-	//outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32);
+	/* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
 	outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
 
   /******************************/
 	/*Configure the CJC Conversion */
   /******************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
 
-	//outl( 0x00000400 , devpriv->iobase+i_Offset + 4);
+	/* outl( 0x00000400 , devpriv->iobase+i_Offset + 4); */
 	outl(0x00000400,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4);
   /*******************************/
@@ -2092,7 +2085,7 @@ int i_APCI3200_ReadCJCValue(struct comedi_device * dev, unsigned int * data)
   /*********************************/
 	/*Test if the interrupt is enable */
   /*********************************/
-	//if (i_InterruptFlag == ADDIDATA_ENABLE)
+	/* if (i_InterruptFlag == ADDIDATA_ENABLE) */
 	if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {
       /**********************/
 		/*Enable the interrupt */
@@ -2109,10 +2102,10 @@ int i_APCI3200_ReadCJCValue(struct comedi_device * dev, unsigned int * data)
   /***************************/
 	/*Write the command regiter */
   /***************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//outl(ui_CommandRegister , devpriv->iobase+i_Offset + 8);
+	/* outl(ui_CommandRegister , devpriv->iobase+i_Offset + 8); */
 	outl(ui_CommandRegister,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
 
@@ -2120,7 +2113,7 @@ int i_APCI3200_ReadCJCValue(struct comedi_device * dev, unsigned int * data)
 	/*Test if interrupt is enable */
   /*****************************/
 
-	//if (i_InterruptFlag == ADDIDATA_DISABLE)
+	/* if (i_InterruptFlag == ADDIDATA_DISABLE) */
 	if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {
 		do {
 
@@ -2128,7 +2121,7 @@ int i_APCI3200_ReadCJCValue(struct comedi_device * dev, unsigned int * data)
 			/*Read the EOC flag */
 	  /*******************/
 
-			//ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1;
+			/* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */
 			ui_EOC = inl(devpriv->iobase +
 				s_BoardInfos[dev->minor].i_Offset + 20) & 1;
 
@@ -2138,12 +2131,12 @@ int i_APCI3200_ReadCJCValue(struct comedi_device * dev, unsigned int * data)
 		/*Read the digital value of the CJC */
       /***********************************/
 
-		//data[0] = inl(devpriv->iobase+i_Offset + 28);
+		/* data[0] = inl(devpriv->iobase+i_Offset + 28); */
 		data[0] =
 			inl(devpriv->iobase +
 			s_BoardInfos[dev->minor].i_Offset + 28);
 
-	}			//if (i_InterruptFlag == ADDIDATA_DISABLE)
+	}			/* if (i_InterruptFlag == ADDIDATA_DISABLE) */
 	return 0;
 }
 
@@ -2156,7 +2149,7 @@ int i_APCI3200_ReadCJCValue(struct comedi_device * dev, unsigned int * data)
   | Task              : Read CJC calibration offset  value  of the selected channel
   +----------------------------------------------------------------------------+
   | Input Parameters  : struct comedi_device *dev      : Driver handle                |
-  |                     UINT *data              : Data Pointer to read status  |
+  |                     unsigned int *data              : Data Pointer to read status  |
   +----------------------------------------------------------------------------+
   | Output Parameters :	--													 |
   |			          data[0]  : CJC calibration offset Value
@@ -2167,47 +2160,47 @@ int i_APCI3200_ReadCJCValue(struct comedi_device * dev, unsigned int * data)
   |			                                                         |
   +----------------------------------------------------------------------------+
 */
-int i_APCI3200_ReadCJCCalOffset(struct comedi_device * dev, unsigned int * data)
+int i_APCI3200_ReadCJCCalOffset(struct comedi_device *dev, unsigned int *data)
 {
-	UINT ui_EOC = 0;
-	INT ui_CommandRegister = 0;
+	unsigned int ui_EOC = 0;
+	int ui_CommandRegister = 0;
   /*******************************************/
 	/*Read calibration offset value for the CJC */
   /*******************************************/
   /*******************************/
 	/* Set the convert timing unit */
   /*******************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36);
+	/* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
 	outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
   /**************************/
 	/* Set the convert timing */
   /**************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32);
+	/* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
 	outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
   /******************************/
 	/*Configure the CJC Conversion */
   /******************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//outl(0x00000400 , devpriv->iobase+i_Offset + 4);
+	/* outl(0x00000400 , devpriv->iobase+i_Offset + 4); */
 	outl(0x00000400,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4);
   /*********************************/
 	/*Configure the Offset Conversion */
   /*********************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//outl(0x00020000, devpriv->iobase+i_Offset + 12);
+	/* outl(0x00020000, devpriv->iobase+i_Offset + 12); */
 	outl(0x00020000,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
   /*******************************/
@@ -2218,7 +2211,7 @@ int i_APCI3200_ReadCJCCalOffset(struct comedi_device * dev, unsigned int * data)
 	/*Test if the interrupt is enable */
   /*********************************/
 
-	//if (i_InterruptFlag == ADDIDATA_ENABLE)
+	/* if (i_InterruptFlag == ADDIDATA_ENABLE) */
 	if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {
       /**********************/
 		/*Enable the interrupt */
@@ -2234,19 +2227,19 @@ int i_APCI3200_ReadCJCCalOffset(struct comedi_device * dev, unsigned int * data)
   /***************************/
 	/*Write the command regiter */
   /***************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//outl(ui_CommandRegister,devpriv->iobase+i_Offset + 8);
+	/* outl(ui_CommandRegister,devpriv->iobase+i_Offset + 8); */
 	outl(ui_CommandRegister,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
-	//if (i_InterruptFlag == ADDIDATA_DISABLE)
+	/* if (i_InterruptFlag == ADDIDATA_DISABLE) */
 	if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {
 		do {
 	  /*******************/
 			/*Read the EOC flag */
 	  /*******************/
-			//ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1;
+			/* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */
 			ui_EOC = inl(devpriv->iobase +
 				s_BoardInfos[dev->minor].i_Offset + 20) & 1;
 		} while (ui_EOC != 1);
@@ -2254,11 +2247,11 @@ int i_APCI3200_ReadCJCCalOffset(struct comedi_device * dev, unsigned int * data)
       /**************************************************/
 		/*Read the digital value of the calibration Offset */
       /**************************************************/
-		//data[0] = inl(devpriv->iobase+i_Offset + 28);
+		/* data[0] = inl(devpriv->iobase+i_Offset + 28); */
 		data[0] =
 			inl(devpriv->iobase +
 			s_BoardInfos[dev->minor].i_Offset + 28);
-	}			//if (i_InterruptFlag == ADDIDATA_DISABLE)
+	}			/* if (i_InterruptFlag == ADDIDATA_DISABLE) */
 	return 0;
 }
 
@@ -2271,8 +2264,8 @@ int i_APCI3200_ReadCJCCalOffset(struct comedi_device * dev, unsigned int * data)
   | Task              : Read CJC calibration gain value
   +----------------------------------------------------------------------------+
   | Input Parameters  : struct comedi_device *dev      : Driver handle                |
-  |                     UINT ui_NoOfChannels    : No Of Channels To read       |
-  |                     UINT *data              : Data Pointer to read status  |
+  |                     unsigned int ui_NoOfChannels    : No Of Channels To read       |
+  |                     unsigned int *data              : Data Pointer to read status  |
   +----------------------------------------------------------------------------+
   | Output Parameters :	--													 |
   |			          data[0]  : CJC calibration gain value
@@ -2283,44 +2276,44 @@ int i_APCI3200_ReadCJCCalOffset(struct comedi_device * dev, unsigned int * data)
   |			                                                         |
   +----------------------------------------------------------------------------+
 */
-int i_APCI3200_ReadCJCCalGain(struct comedi_device * dev, unsigned int * data)
+int i_APCI3200_ReadCJCCalGain(struct comedi_device *dev, unsigned int *data)
 {
-	UINT ui_EOC = 0;
-	INT ui_CommandRegister = 0;
+	unsigned int ui_EOC = 0;
+	int ui_CommandRegister = 0;
   /*******************************/
 	/* Set the convert timing unit */
   /*******************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36);
+	/* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */
 	outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
   /**************************/
 	/* Set the convert timing */
   /**************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32);
+	/* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */
 	outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
   /******************************/
 	/*Configure the CJC Conversion */
   /******************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//outl(0x00000400,devpriv->iobase+i_Offset + 4);
+	/* outl(0x00000400,devpriv->iobase+i_Offset + 4); */
 	outl(0x00000400,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4);
   /*******************************/
 	/*Configure the Gain Conversion */
   /*******************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//outl(0x00040000,devpriv->iobase+i_Offset + 12);
+	/* outl(0x00040000,devpriv->iobase+i_Offset + 12); */
 	outl(0x00040000,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
 
@@ -2331,7 +2324,7 @@ int i_APCI3200_ReadCJCCalGain(struct comedi_device * dev, unsigned int * data)
   /*********************************/
 	/*Test if the interrupt is enable */
   /*********************************/
-	//if (i_InterruptFlag == ADDIDATA_ENABLE)
+	/* if (i_InterruptFlag == ADDIDATA_ENABLE) */
 	if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) {
       /**********************/
 		/*Enable the interrupt */
@@ -2345,30 +2338,30 @@ int i_APCI3200_ReadCJCCalGain(struct comedi_device * dev, unsigned int * data)
   /***************************/
 	/*Write the command regiter */
   /***************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//outl(ui_CommandRegister ,devpriv->iobase+i_Offset + 8);
+	/* outl(ui_CommandRegister ,devpriv->iobase+i_Offset + 8); */
 	outl(ui_CommandRegister,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
-	//if (i_InterruptFlag == ADDIDATA_DISABLE)
+	/* if (i_InterruptFlag == ADDIDATA_DISABLE) */
 	if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) {
 		do {
 	  /*******************/
 			/*Read the EOC flag */
 	  /*******************/
-			//ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1;
+			/* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */
 			ui_EOC = inl(devpriv->iobase +
 				s_BoardInfos[dev->minor].i_Offset + 20) & 1;
 		} while (ui_EOC != 1);
       /************************************************/
 		/*Read the digital value of the calibration Gain */
       /************************************************/
-		//data[0] = inl (devpriv->iobase+i_Offset + 28);
+		/* data[0] = inl (devpriv->iobase+i_Offset + 28); */
 		data[0] =
 			inl(devpriv->iobase +
 			s_BoardInfos[dev->minor].i_Offset + 28);
-	}			//if (i_InterruptFlag == ADDIDATA_DISABLE)
+	}			/* if (i_InterruptFlag == ADDIDATA_DISABLE) */
 	return 0;
 }
 
@@ -2404,33 +2397,33 @@ int i_APCI3200_ReadCJCCalGain(struct comedi_device * dev, unsigned int * data)
   +----------------------------------------------------------------------------+
 */
 
-INT i_APCI3200_InsnBits_AnalogInput_Test(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI3200_InsnBits_AnalogInput_Test(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_Configuration = 0;
-	INT i_Temp;		//,i_TimeUnit;
-	//if(i_Initialised==0)
+	unsigned int ui_Configuration = 0;
+	int i_Temp;		/* ,i_TimeUnit; */
+	/* if(i_Initialised==0) */
 
 	if (s_BoardInfos[dev->minor].i_Initialised == 0) {
 		i_APCI3200_Reset(dev);
 		return -EINVAL;
-	}			//if(i_Initialised==0);
+	}			/* if(i_Initialised==0); */
 	if (data[0] != 0 && data[0] != 1) {
 		printk("\nError in selection of functionality\n");
 		i_APCI3200_Reset(dev);
 		return -EINVAL;
-	}			//if(data[0]!=0 && data[0]!=1)
+	}			/* if(data[0]!=0 && data[0]!=1) */
 
-	if (data[0] == 1)	//Perform Short Circuit TEST
+	if (data[0] == 1)	/* Perform Short Circuit TEST */
 	{
       /**************************/
 		/*Set the short-cicuit bit */
       /**************************/
-		//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+		/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 		while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].
 						i_Offset + 12) >> 19) & 1) !=
 			1) ;
-		//outl((0x00001000 |i_ChannelNo) , devpriv->iobase+i_Offset + 4);
+		/* outl((0x00001000 |i_ChannelNo) , devpriv->iobase+i_Offset + 4); */
 		outl((0x00001000 | s_BoardInfos[dev->minor].i_ChannelNo),
 			devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 			4);
@@ -2439,19 +2432,19 @@ INT i_APCI3200_InsnBits_AnalogInput_Test(struct comedi_device * dev,
       /*************************/
 		/* i_TimeUnit= i_ADDIDATAConversionTimeUnit;
 		   i_ADDIDATAConversionTimeUnit= 1; */
-		//i_Temp= i_InterruptFlag ;
+		/* i_Temp= i_InterruptFlag ; */
 		i_Temp = s_BoardInfos[dev->minor].i_InterruptFlag;
-		//i_InterruptFlag = ADDIDATA_DISABLE;
+		/* i_InterruptFlag = ADDIDATA_DISABLE; */
 		s_BoardInfos[dev->minor].i_InterruptFlag = ADDIDATA_DISABLE;
 		i_APCI3200_Read1AnalogInputChannel(dev, s, insn, data);
-		//if(i_AutoCalibration == FALSE)
+		/* if(i_AutoCalibration == FALSE) */
 		if (s_BoardInfos[dev->minor].i_AutoCalibration == FALSE) {
-			//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+			/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 			while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].
 							i_Offset +
 							12) >> 19) & 1) != 1) ;
 
-			//outl((0x00001000 |i_ChannelNo) , devpriv->iobase+i_Offset + 4);
+			/* outl((0x00001000 |i_ChannelNo) , devpriv->iobase+i_Offset + 4); */
 			outl((0x00001000 | s_BoardInfos[dev->minor].
 					i_ChannelNo),
 				devpriv->iobase +
@@ -2462,15 +2455,15 @@ INT i_APCI3200_InsnBits_AnalogInput_Test(struct comedi_device * dev,
 			i_APCI3200_ReadCalibrationGainValue(dev, data);
 		}
 	} else {
-		//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+		/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 		while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].
 						i_Offset + 12) >> 19) & 1) !=
 			1) ;
-		//outl((0x00000800|i_ChannelNo) , devpriv->iobase+i_Offset + 4);
+		/* outl((0x00000800|i_ChannelNo) , devpriv->iobase+i_Offset + 4); */
 		outl((0x00000800 | s_BoardInfos[dev->minor].i_ChannelNo),
 			devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 			4);
-		//ui_Configuration = inl(devpriv->iobase+i_Offset + 0);
+		/* ui_Configuration = inl(devpriv->iobase+i_Offset + 0); */
 		ui_Configuration =
 			inl(devpriv->iobase +
 			s_BoardInfos[dev->minor].i_Offset + 0);
@@ -2479,18 +2472,18 @@ INT i_APCI3200_InsnBits_AnalogInput_Test(struct comedi_device * dev,
       /*************************/
 		/* i_TimeUnit= i_ADDIDATAConversionTimeUnit;
 		   i_ADDIDATAConversionTimeUnit= 1; */
-		//i_Temp= i_InterruptFlag ;
+		/* i_Temp= i_InterruptFlag ; */
 		i_Temp = s_BoardInfos[dev->minor].i_InterruptFlag;
-		//i_InterruptFlag = ADDIDATA_DISABLE;
+		/* i_InterruptFlag = ADDIDATA_DISABLE; */
 		s_BoardInfos[dev->minor].i_InterruptFlag = ADDIDATA_DISABLE;
 		i_APCI3200_Read1AnalogInputChannel(dev, s, insn, data);
-		//if(i_AutoCalibration == FALSE)
+		/* if(i_AutoCalibration == FALSE) */
 		if (s_BoardInfos[dev->minor].i_AutoCalibration == FALSE) {
-			//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+			/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 			while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].
 							i_Offset +
 							12) >> 19) & 1) != 1) ;
-			//outl((0x00000800|i_ChannelNo) , devpriv->iobase+i_Offset + 4);
+			/* outl((0x00000800|i_ChannelNo) , devpriv->iobase+i_Offset + 4); */
 			outl((0x00000800 | s_BoardInfos[dev->minor].
 					i_ChannelNo),
 				devpriv->iobase +
@@ -2501,9 +2494,9 @@ INT i_APCI3200_InsnBits_AnalogInput_Test(struct comedi_device * dev,
 			i_APCI3200_ReadCalibrationGainValue(dev, data);
 		}
 	}
-	//i_InterruptFlag=i_Temp ;
+	/* i_InterruptFlag=i_Temp ; */
 	s_BoardInfos[dev->minor].i_InterruptFlag = i_Temp;
-	//printk("\ni_InterruptFlag=%d\n",i_InterruptFlag);
+	/* printk("\ni_InterruptFlag=%d\n",i_InterruptFlag); */
 	return insn->n;
 }
 
@@ -2529,8 +2522,8 @@ INT i_APCI3200_InsnBits_AnalogInput_Test(struct comedi_device * dev,
   +----------------------------------------------------------------------------+
 */
 
-INT i_APCI3200_InsnWriteReleaseAnalogInput(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI3200_InsnWriteReleaseAnalogInput(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 	i_APCI3200_Reset(dev);
 	return insn->n;
@@ -2560,23 +2553,23 @@ INT i_APCI3200_InsnWriteReleaseAnalogInput(struct comedi_device * dev,
   +----------------------------------------------------------------------------+
 */
 
-int i_APCI3200_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+int i_APCI3200_CommandTestAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 
 	int err = 0;
-	int tmp;		// divisor1,divisor2;
-	UINT ui_ConvertTime = 0;
-	UINT ui_ConvertTimeBase = 0;
-	UINT ui_DelayTime = 0;
-	UINT ui_DelayTimeBase = 0;
-	INT i_Triggermode = 0;
-	INT i_TriggerEdge = 0;
-	INT i_NbrOfChannel = 0;
-	INT i_Cpt = 0;
+	int tmp;		/*  divisor1,divisor2; */
+	unsigned int ui_ConvertTime = 0;
+	unsigned int ui_ConvertTimeBase = 0;
+	unsigned int ui_DelayTime = 0;
+	unsigned int ui_DelayTimeBase = 0;
+	int i_Triggermode = 0;
+	int i_TriggerEdge = 0;
+	int i_NbrOfChannel = 0;
+	int i_Cpt = 0;
 	double d_ConversionTimeForAllChannels = 0.0;
 	double d_SCANTimeNewUnit = 0.0;
-	// step 1: make sure trigger sources are trivially valid
+	/*  step 1: make sure trigger sources are trivially valid */
 
 	tmp = cmd->start_src;
 	cmd->start_src &= TRIG_NOW | TRIG_EXT;
@@ -2598,10 +2591,10 @@ int i_APCI3200_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_
 	cmd->stop_src &= TRIG_COUNT | TRIG_NONE;
 	if (!cmd->stop_src || tmp != cmd->stop_src)
 		err++;
-	//if(i_InterruptFlag==0)
+	/* if(i_InterruptFlag==0) */
 	if (s_BoardInfos[dev->minor].i_InterruptFlag == 0) {
 		err++;
-		//          printk("\nThe interrupt should be enabled\n");
+		/*           printk("\nThe interrupt should be enabled\n"); */
 	}
 	if (err) {
 		i_APCI3200_Reset(dev);
@@ -2643,9 +2636,9 @@ int i_APCI3200_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_
 		i_APCI3200_Reset(dev);
 		return 2;
 	}
-	//i_FirstChannel=cmd->chanlist[0];
+	/* i_FirstChannel=cmd->chanlist[0]; */
 	s_BoardInfos[dev->minor].i_FirstChannel = cmd->chanlist[0];
-	//i_LastChannel=cmd->chanlist[1];
+	/* i_LastChannel=cmd->chanlist[1]; */
 	s_BoardInfos[dev->minor].i_LastChannel = cmd->chanlist[1];
 
 	if (cmd->convert_src == TRIG_TIMER) {
@@ -2656,11 +2649,11 @@ int i_APCI3200_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_
 		{
 			printk("\nThe selection of conversion time reload value is in error\n");
 			err++;
-		}		// if (ui_ConvertTime!=20 && ui_ConvertTime!=40 && ui_ConvertTime!=80 && ui_ConvertTime!=160 )
+		}		/*  if (ui_ConvertTime!=20 && ui_ConvertTime!=40 && ui_ConvertTime!=80 && ui_ConvertTime!=160 ) */
 		if (ui_ConvertTimeBase != 2) {
 			printk("\nThe selection of conversion time unit  is in error\n");
 			err++;
-		}		//if(ui_ConvertTimeBase!=2)
+		}		/* if(ui_ConvertTimeBase!=2) */
 	} else {
 		ui_ConvertTime = 0;
 		ui_ConvertTimeBase = 0;
@@ -2668,7 +2661,7 @@ int i_APCI3200_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_
 	if (cmd->scan_begin_src == TRIG_FOLLOW) {
 		ui_DelayTime = 0;
 		ui_DelayTimeBase = 0;
-	}			//if(cmd->scan_begin_src==TRIG_FOLLOW)
+	}			/* if(cmd->scan_begin_src==TRIG_FOLLOW) */
 	else {
 		ui_DelayTime = cmd->scan_begin_arg & 0xFFFF;
 		ui_DelayTimeBase = cmd->scan_begin_arg >> 16;
@@ -2686,7 +2679,7 @@ int i_APCI3200_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_
 		}
 		fpu_begin();
 		d_SCANTimeNewUnit = (double)ui_DelayTime;
-		//i_NbrOfChannel= i_LastChannel-i_FirstChannel + 4;
+		/* i_NbrOfChannel= i_LastChannel-i_FirstChannel + 4; */
 		i_NbrOfChannel =
 			s_BoardInfos[dev->minor].i_LastChannel -
 			s_BoardInfos[dev->minor].i_FirstChannel + 4;
@@ -2736,7 +2729,7 @@ int i_APCI3200_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_
 			err++;
 		}
 		fpu_end();
-	}			//else if(cmd->scan_begin_src==TRIG_FOLLOW)
+	}			/* else if(cmd->scan_begin_src==TRIG_FOLLOW) */
 
 	if (err) {
 		i_APCI3200_Reset(dev);
@@ -2764,13 +2757,13 @@ int i_APCI3200_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_
   +----------------------------------------------------------------------------+
 */
 
-int i_APCI3200_StopCyclicAcquisition(struct comedi_device * dev, struct comedi_subdevice * s)
+int i_APCI3200_StopCyclicAcquisition(struct comedi_device *dev, struct comedi_subdevice *s)
 {
-	UINT ui_Configuration = 0;
-	//i_InterruptFlag=0;
-	//i_Initialised=0;
-	//i_Count=0;
-	//i_Sum=0;
+	unsigned int ui_Configuration = 0;
+	/* i_InterruptFlag=0; */
+	/* i_Initialised=0; */
+	/* i_Count=0; */
+	/* i_Sum=0; */
 	s_BoardInfos[dev->minor].i_InterruptFlag = 0;
 	s_BoardInfos[dev->minor].i_Initialised = 0;
 	s_BoardInfos[dev->minor].i_Count = 0;
@@ -2779,16 +2772,16 @@ int i_APCI3200_StopCyclicAcquisition(struct comedi_device * dev, struct comedi_s
   /*******************/
 	/*Read the register */
   /*******************/
-	//ui_Configuration = inl(devpriv->iobase+i_Offset + 8);
+	/* ui_Configuration = inl(devpriv->iobase+i_Offset + 8); */
 	ui_Configuration =
 		inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
   /*****************************/
 	/*Reset the START and IRQ bit */
   /*****************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//outl((ui_Configuration & 0xFFE7FFFF),devpriv->iobase+i_Offset + 8);
+	/* outl((ui_Configuration & 0xFFE7FFFF),devpriv->iobase+i_Offset + 8); */
 	outl((ui_Configuration & 0xFFE7FFFF),
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
 	return 0;
@@ -2814,52 +2807,52 @@ int i_APCI3200_StopCyclicAcquisition(struct comedi_device * dev, struct comedi_s
   +----------------------------------------------------------------------------+
 */
 
-int i_APCI3200_CommandAnalogInput(struct comedi_device * dev, struct comedi_subdevice * s)
+int i_APCI3200_CommandAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct comedi_cmd *cmd = &s->async->cmd;
-	UINT ui_Configuration = 0;
-	//INT  i_CurrentSource = 0;
-	UINT ui_Trigger = 0;
-	UINT ui_TriggerEdge = 0;
-	UINT ui_Triggermode = 0;
-	UINT ui_ScanMode = 0;
-	UINT ui_ConvertTime = 0;
-	UINT ui_ConvertTimeBase = 0;
-	UINT ui_DelayTime = 0;
-	UINT ui_DelayTimeBase = 0;
-	UINT ui_DelayMode = 0;
-	//i_FirstChannel=cmd->chanlist[0];
-	//i_LastChannel=cmd->chanlist[1];
+	unsigned int ui_Configuration = 0;
+	/* INT  i_CurrentSource = 0; */
+	unsigned int ui_Trigger = 0;
+	unsigned int ui_TriggerEdge = 0;
+	unsigned int ui_Triggermode = 0;
+	unsigned int ui_ScanMode = 0;
+	unsigned int ui_ConvertTime = 0;
+	unsigned int ui_ConvertTimeBase = 0;
+	unsigned int ui_DelayTime = 0;
+	unsigned int ui_DelayTimeBase = 0;
+	unsigned int ui_DelayMode = 0;
+	/* i_FirstChannel=cmd->chanlist[0]; */
+	/* i_LastChannel=cmd->chanlist[1]; */
 	s_BoardInfos[dev->minor].i_FirstChannel = cmd->chanlist[0];
 	s_BoardInfos[dev->minor].i_LastChannel = cmd->chanlist[1];
 	if (cmd->start_src == TRIG_EXT) {
 		ui_Trigger = 1;
 		ui_TriggerEdge = cmd->start_arg & 0xFFFF;
 		ui_Triggermode = cmd->start_arg >> 16;
-	}			//if(cmd->start_src==TRIG_EXT)
+	}			/* if(cmd->start_src==TRIG_EXT) */
 	else {
 		ui_Trigger = 0;
-	}			//elseif(cmd->start_src==TRIG_EXT)
+	}			/* elseif(cmd->start_src==TRIG_EXT) */
 
 	if (cmd->stop_src == TRIG_COUNT) {
 		ui_ScanMode = 0;
-	}			// if (cmd->stop_src==TRIG_COUNT)
+	}			/*  if (cmd->stop_src==TRIG_COUNT) */
 	else {
 		ui_ScanMode = 2;
-	}			//else if (cmd->stop_src==TRIG_COUNT)
+	}			/* else if (cmd->stop_src==TRIG_COUNT) */
 
 	if (cmd->scan_begin_src == TRIG_FOLLOW) {
 		ui_DelayTime = 0;
 		ui_DelayTimeBase = 0;
 		ui_DelayMode = 0;
-	}			//if(cmd->scan_begin_src==TRIG_FOLLOW)
+	}			/* if(cmd->scan_begin_src==TRIG_FOLLOW) */
 	else {
 		ui_DelayTime = cmd->scan_begin_arg & 0xFFFF;
 		ui_DelayTimeBase = cmd->scan_begin_arg >> 16;
 		ui_DelayMode = 1;
-	}			//else if(cmd->scan_begin_src==TRIG_FOLLOW)
-	//        printk("\nui_DelayTime=%u\n",ui_DelayTime);
-	//        printk("\nui_DelayTimeBase=%u\n",ui_DelayTimeBase);
+	}			/* else if(cmd->scan_begin_src==TRIG_FOLLOW) */
+	/*         printk("\nui_DelayTime=%u\n",ui_DelayTime); */
+	/*         printk("\nui_DelayTimeBase=%u\n",ui_DelayTimeBase); */
 	if (cmd->convert_src == TRIG_TIMER) {
 		ui_ConvertTime = cmd->convert_arg & 0xFFFF;
 		ui_ConvertTimeBase = cmd->convert_arg >> 16;
@@ -2868,34 +2861,34 @@ int i_APCI3200_CommandAnalogInput(struct comedi_device * dev, struct comedi_subd
 		ui_ConvertTimeBase = 0;
 	}
 
-	// if(i_ADDIDATAType ==1 || ((i_ADDIDATAType==2)))
-	//   {
+	/*  if(i_ADDIDATAType ==1 || ((i_ADDIDATAType==2))) */
+	/*    { */
   /**************************************************/
 	/*Read the old configuration of the current source */
   /**************************************************/
-	//ui_Configuration = inl(devpriv->iobase+i_Offset + 12);
+	/* ui_Configuration = inl(devpriv->iobase+i_Offset + 12); */
 	ui_Configuration =
 		inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
   /***********************************************/
 	/*Write the configuration of the current source */
   /***********************************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//outl((ui_Configuration & 0xFFC00000 ), devpriv->iobase+i_Offset +12);
+	/* outl((ui_Configuration & 0xFFC00000 ), devpriv->iobase+i_Offset +12); */
 	outl((ui_Configuration & 0xFFC00000),
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12);
-	// }
+	/*  } */
 	ui_Configuration = 0;
-	//     printk("\nfirstchannel=%u\n",i_FirstChannel);
-	//     printk("\nlastchannel=%u\n",i_LastChannel);
-	//     printk("\nui_Trigger=%u\n",ui_Trigger);
-	//     printk("\nui_TriggerEdge=%u\n",ui_TriggerEdge);
-	//     printk("\nui_Triggermode=%u\n",ui_Triggermode);
-	//      printk("\nui_DelayMode=%u\n",ui_DelayMode);
-	//     printk("\nui_ScanMode=%u\n",ui_ScanMode);
-
-	//ui_Configuration = i_FirstChannel |(i_LastChannel << 8)| 0x00100000 |
+	/*      printk("\nfirstchannel=%u\n",i_FirstChannel); */
+	/*      printk("\nlastchannel=%u\n",i_LastChannel); */
+	/*      printk("\nui_Trigger=%u\n",ui_Trigger); */
+	/*      printk("\nui_TriggerEdge=%u\n",ui_TriggerEdge); */
+	/*      printk("\nui_Triggermode=%u\n",ui_Triggermode); */
+	/*       printk("\nui_DelayMode=%u\n",ui_DelayMode); */
+	/*      printk("\nui_ScanMode=%u\n",ui_ScanMode); */
+
+	/* ui_Configuration = i_FirstChannel |(i_LastChannel << 8)| 0x00100000 | */
 	ui_Configuration =
 		s_BoardInfos[dev->minor].i_FirstChannel | (s_BoardInfos[dev->
 			minor].
@@ -2906,80 +2899,80 @@ int i_APCI3200_CommandAnalogInput(struct comedi_device * dev, struct comedi_subd
   /*************************/
 	/*Write the Configuration */
   /*************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//outl( ui_Configuration, devpriv->iobase+i_Offset + 0x8);
+	/* outl( ui_Configuration, devpriv->iobase+i_Offset + 0x8); */
 	outl(ui_Configuration,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x8);
   /***********************/
 	/*Write the Delay Value */
   /***********************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//outl(ui_DelayTime,devpriv->iobase+i_Offset + 40);
+	/* outl(ui_DelayTime,devpriv->iobase+i_Offset + 40); */
 	outl(ui_DelayTime,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 40);
   /***************************/
 	/*Write the Delay time base */
   /***************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//outl(ui_DelayTimeBase,devpriv->iobase+i_Offset + 44);
+	/* outl(ui_DelayTimeBase,devpriv->iobase+i_Offset + 44); */
 	outl(ui_DelayTimeBase,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 44);
   /*********************************/
 	/*Write the conversion time value */
   /*********************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//outl(ui_ConvertTime,devpriv->iobase+i_Offset + 32);
+	/* outl(ui_ConvertTime,devpriv->iobase+i_Offset + 32); */
 	outl(ui_ConvertTime,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32);
 
   /********************************/
 	/*Write the conversion time base */
   /********************************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//outl(ui_ConvertTimeBase,devpriv->iobase+i_Offset + 36);
+	/* outl(ui_ConvertTimeBase,devpriv->iobase+i_Offset + 36); */
 	outl(ui_ConvertTimeBase,
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36);
   /*******************/
 	/*Read the register */
   /*******************/
-	//ui_Configuration = inl(devpriv->iobase+i_Offset + 4);
+	/* ui_Configuration = inl(devpriv->iobase+i_Offset + 4); */
 	ui_Configuration =
 		inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4);
   /******************/
 	/*Set the SCAN bit */
   /******************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
 
-	//outl(((ui_Configuration & 0x1E0FF) | 0x00002000),devpriv->iobase+i_Offset + 4);
+	/* outl(((ui_Configuration & 0x1E0FF) | 0x00002000),devpriv->iobase+i_Offset + 4); */
 	outl(((ui_Configuration & 0x1E0FF) | 0x00002000),
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4);
   /*******************/
 	/*Read the register */
   /*******************/
 	ui_Configuration = 0;
-	//ui_Configuration = inl(devpriv->iobase+i_Offset + 8);
+	/* ui_Configuration = inl(devpriv->iobase+i_Offset + 8); */
 	ui_Configuration =
 		inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
 
   /*******************/
 	/*Set the START bit */
   /*******************/
-	//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
+	/* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */
 	while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset +
 					12) >> 19) & 1) != 1) ;
-	//outl((ui_Configuration | 0x00080000),devpriv->iobase+i_Offset + 8);
+	/* outl((ui_Configuration | 0x00080000),devpriv->iobase+i_Offset + 8); */
 	outl((ui_Configuration | 0x00080000),
 		devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8);
 	return 0;
@@ -3001,14 +2994,14 @@ int i_APCI3200_CommandAnalogInput(struct comedi_device * dev, struct comedi_subd
   +----------------------------------------------------------------------------+
 */
 
-int i_APCI3200_Reset(struct comedi_device * dev)
+int i_APCI3200_Reset(struct comedi_device *dev)
 {
-	INT i_Temp;
-	DWORD dw_Dummy;
-	//i_InterruptFlag=0;
-	//i_Initialised==0;
-	//i_Count=0;
-	//i_Sum=0;
+	int i_Temp;
+	unsigned int dw_Dummy;
+	/* i_InterruptFlag=0; */
+	/* i_Initialised==0; */
+	/* i_Count=0; */
+	/* i_Sum=0; */
 
 	s_BoardInfos[dev->minor].i_InterruptFlag = 0;
 	s_BoardInfos[dev->minor].i_Initialised = 0;
@@ -3018,17 +3011,17 @@ int i_APCI3200_Reset(struct comedi_device * dev)
 
 	outl(0x83838383, devpriv->i_IobaseAmcc + 0x60);
 
-	// Enable the interrupt for the controler
+	/*  Enable the interrupt for the controler */
 	dw_Dummy = inl(devpriv->i_IobaseAmcc + 0x38);
 	outl(dw_Dummy | 0x2000, devpriv->i_IobaseAmcc + 0x38);
-	outl(0, devpriv->i_IobaseAddon);	//Resets the output
+	outl(0, devpriv->i_IobaseAddon);	/* Resets the output */
   /***************/
 	/*Empty the buffer */
   /**************/
 	for (i_Temp = 0; i_Temp <= 95; i_Temp++) {
-		//ui_InterruptChannelValue[i_Temp]=0;
+		/* ui_InterruptChannelValue[i_Temp]=0; */
 		s_BoardInfos[dev->minor].ui_InterruptChannelValue[i_Temp] = 0;
-	}			//for(i_Temp=0;i_Temp<=95;i_Temp++)
+	}			/* for(i_Temp=0;i_Temp<=95;i_Temp++) */
   /*****************************/
 	/*Reset the START and IRQ bit */
   /*****************************/
@@ -3036,7 +3029,7 @@ int i_APCI3200_Reset(struct comedi_device * dev)
 		while (((inl(devpriv->iobase + i_Temp + 12) >> 19) & 1) != 1) ;
 		outl(0, devpriv->iobase + i_Temp + 8);
 		i_Temp = i_Temp + 64;
-	}			//for(i_Temp=0;i_Temp<=192;i_Temp+64)
+	}			/* for(i_Temp=0;i_Temp<=192;i_Temp+64) */
 	return 0;
 }
 
@@ -3060,26 +3053,26 @@ int i_APCI3200_Reset(struct comedi_device * dev)
 void v_APCI3200_Interrupt(int irq, void *d)
 {
 	struct comedi_device *dev = d;
-	UINT ui_StatusRegister = 0;
-	UINT ui_ChannelNumber = 0;
-	INT i_CalibrationFlag = 0;
-	INT i_CJCFlag = 0;
-	UINT ui_DummyValue = 0;
-	UINT ui_DigitalTemperature = 0;
-	UINT ui_DigitalInput = 0;
+	unsigned int ui_StatusRegister = 0;
+	unsigned int ui_ChannelNumber = 0;
+	int i_CalibrationFlag = 0;
+	int i_CJCFlag = 0;
+	unsigned int ui_DummyValue = 0;
+	unsigned int ui_DigitalTemperature = 0;
+	unsigned int ui_DigitalInput = 0;
 	int i_ConvertCJCCalibration;
 
-	//BEGIN JK TEST
+	/* BEGIN JK TEST */
 	int i_ReturnValue = 0;
-	//END JK TEST
+	/* END JK TEST */
 
-	//printk ("\n i_ScanType = %i i_ADDIDATAType = %i", s_BoardInfos [dev->minor].i_ScanType, s_BoardInfos [dev->minor].i_ADDIDATAType);
+	/* printk ("\n i_ScanType = %i i_ADDIDATAType = %i", s_BoardInfos [dev->minor].i_ScanType, s_BoardInfos [dev->minor].i_ADDIDATAType); */
 
-	//switch(i_ScanType)
+	/* switch(i_ScanType) */
 	switch (s_BoardInfos[dev->minor].i_ScanType) {
 	case 0:
 	case 1:
-		//switch(i_ADDIDATAType)
+		/* switch(i_ADDIDATAType) */
 		switch (s_BoardInfos[dev->minor].i_ADDIDATAType) {
 		case 0:
 		case 1:
@@ -3087,12 +3080,12 @@ void v_APCI3200_Interrupt(int irq, void *d)
 	  /************************************/
 			/*Read the interrupt status register */
 	  /************************************/
-			//ui_StatusRegister = inl(devpriv->iobase+i_Offset + 16);
+			/* ui_StatusRegister = inl(devpriv->iobase+i_Offset + 16); */
 			ui_StatusRegister =
 				inl(devpriv->iobase +
 				s_BoardInfos[dev->minor].i_Offset + 16);
 			if ((ui_StatusRegister & 0x2) == 0x2) {
-				//i_CalibrationFlag = ((inl(devpriv->iobase+i_Offset + 12) & 0x00060000) >> 17);
+				/* i_CalibrationFlag = ((inl(devpriv->iobase+i_Offset + 12) & 0x00060000) >> 17); */
 				i_CalibrationFlag =
 					((inl(devpriv->iobase +
 							s_BoardInfos[dev->
@@ -3103,12 +3096,12 @@ void v_APCI3200_Interrupt(int irq, void *d)
 	      /*************************/
 				/*Read the channel number */
 	      /*************************/
-				//ui_ChannelNumber = inl(devpriv->iobase+i_Offset + 24);
+				/* ui_ChannelNumber = inl(devpriv->iobase+i_Offset + 24); */
 
 	      /*************************************/
 				/*Read the digital analog input value */
 	      /*************************************/
-				//ui_DigitalInput = inl(devpriv->iobase+i_Offset + 28);
+				/* ui_DigitalInput = inl(devpriv->iobase+i_Offset + 28); */
 				ui_DigitalInput =
 					inl(devpriv->iobase +
 					s_BoardInfos[dev->minor].i_Offset + 28);
@@ -3117,13 +3110,13 @@ void v_APCI3200_Interrupt(int irq, void *d)
 				/* Test if the value read is the channel value */
 	      /***********************************************/
 				if (i_CalibrationFlag == 0) {
-					//ui_InterruptChannelValue[i_Count + 0] = ui_DigitalInput;
+					/* ui_InterruptChannelValue[i_Count + 0] = ui_DigitalInput; */
 					s_BoardInfos[dev->minor].
 						ui_InterruptChannelValue
 						[s_BoardInfos[dev->minor].
 						i_Count + 0] = ui_DigitalInput;
 
-					//Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+					/* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 					/*
 					   printk("\n 1 - i_APCI3200_GetChannelCalibrationValue (dev, s_BoardInfos %i", ui_ChannelNumber);
 					   i_APCI3200_GetChannelCalibrationValue (dev, s_BoardInfos [dev->minor].ui_Channel_num,
@@ -3131,14 +3124,14 @@ void v_APCI3200_Interrupt(int irq, void *d)
 					   &s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count + 7],
 					   &s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count + 8]);
 					 */
-					//End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+					/* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 
 		  /******************************************************/
 					/*Start the conversion of the calibration offset value */
 		  /******************************************************/
 					i_APCI3200_ReadCalibrationOffsetValue
 						(dev, &ui_DummyValue);
-				}	//if (i_CalibrationFlag == 0)
+				}	/* if (i_CalibrationFlag == 0) */
 	      /**********************************************************/
 				/* Test if the value read is the calibration offset value */
 	      /**********************************************************/
@@ -3149,7 +3142,7 @@ void v_APCI3200_Interrupt(int irq, void *d)
 					/* Save the value */
 		  /******************/
 
-					//ui_InterruptChannelValue[i_Count + 1] = ui_DigitalInput;
+					/* ui_InterruptChannelValue[i_Count + 1] = ui_DigitalInput; */
 					s_BoardInfos[dev->minor].
 						ui_InterruptChannelValue
 						[s_BoardInfos[dev->minor].
@@ -3160,7 +3153,7 @@ void v_APCI3200_Interrupt(int irq, void *d)
 		  /******************************************************/
 					i_APCI3200_ReadCalibrationGainValue(dev,
 						&ui_DummyValue);
-				}	//if (i_CalibrationFlag == 1)
+				}	/* if (i_CalibrationFlag == 1) */
 	      /******************************************************/
 				/*Test if the value read is the calibration gain value */
 	      /******************************************************/
@@ -3170,48 +3163,48 @@ void v_APCI3200_Interrupt(int irq, void *d)
 		  /****************/
 					/*Save the value */
 		  /****************/
-					//ui_InterruptChannelValue[i_Count + 2] = ui_DigitalInput;
+					/* ui_InterruptChannelValue[i_Count + 2] = ui_DigitalInput; */
 					s_BoardInfos[dev->minor].
 						ui_InterruptChannelValue
 						[s_BoardInfos[dev->minor].
 						i_Count + 2] = ui_DigitalInput;
-					//if(i_ScanType==1)
+					/* if(i_ScanType==1) */
 					if (s_BoardInfos[dev->minor].
 						i_ScanType == 1) {
 
-						//i_InterruptFlag=0;
+						/* i_InterruptFlag=0; */
 						s_BoardInfos[dev->minor].
 							i_InterruptFlag = 0;
-						//i_Count=i_Count + 6;
-						//Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
-						//s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count + 6;
+						/* i_Count=i_Count + 6; */
+						/* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+						/* s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count + 6; */
 						s_BoardInfos[dev->minor].
 							i_Count =
 							s_BoardInfos[dev->
 							minor].i_Count + 9;
-						//End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
-					}	//if(i_ScanType==1)
+						/* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+					}	/* if(i_ScanType==1) */
 					else {
-						//i_Count=0;
+						/* i_Count=0; */
 						s_BoardInfos[dev->minor].
 							i_Count = 0;
-					}	//elseif(i_ScanType==1)
-					//if(i_ScanType!=1)
+					}	/* elseif(i_ScanType==1) */
+					/* if(i_ScanType!=1) */
 					if (s_BoardInfos[dev->minor].
 						i_ScanType != 1) {
-						i_ReturnValue = send_sig(SIGIO, devpriv->tsk_Current, 0);	// send signal to the sample
-					}	//if(i_ScanType!=1)
+						i_ReturnValue = send_sig(SIGIO, devpriv->tsk_Current, 0);	/*  send signal to the sample */
+					}	/* if(i_ScanType!=1) */
 					else {
-						//if(i_ChannelCount==i_Sum)
+						/* if(i_ChannelCount==i_Sum) */
 						if (s_BoardInfos[dev->minor].
 							i_ChannelCount ==
 							s_BoardInfos[dev->
 								minor].i_Sum) {
-							send_sig(SIGIO, devpriv->tsk_Current, 0);	// send signal to the sample
+							send_sig(SIGIO, devpriv->tsk_Current, 0);	/*  send signal to the sample */
 						}
-					}	//if(i_ScanType!=1)
-				}	//if (i_CalibrationFlag == 2)
-			}	// if ((ui_StatusRegister & 0x2) == 0x2)
+					}	/* if(i_ScanType!=1) */
+				}	/* if (i_CalibrationFlag == 2) */
+			}	/*  if ((ui_StatusRegister & 0x2) == 0x2) */
 
 			break;
 
@@ -3220,7 +3213,7 @@ void v_APCI3200_Interrupt(int irq, void *d)
 			/*Read the interrupt status register */
 	  /************************************/
 
-			//ui_StatusRegister = inl(devpriv->iobase+i_Offset + 16);
+			/* ui_StatusRegister = inl(devpriv->iobase+i_Offset + 16); */
 			ui_StatusRegister =
 				inl(devpriv->iobase +
 				s_BoardInfos[dev->minor].i_Offset + 16);
@@ -3230,7 +3223,7 @@ void v_APCI3200_Interrupt(int irq, void *d)
 
 			if ((ui_StatusRegister & 0x2) == 0x2) {
 
-				//i_CJCFlag = ((inl(devpriv->iobase+i_Offset + 4) & 0x00000400) >> 10);
+				/* i_CJCFlag = ((inl(devpriv->iobase+i_Offset + 4) & 0x00000400) >> 10); */
 				i_CJCFlag =
 					((inl(devpriv->iobase +
 							s_BoardInfos[dev->
@@ -3238,7 +3231,7 @@ void v_APCI3200_Interrupt(int irq, void *d)
 							i_Offset +
 							4) & 0x00000400) >> 10);
 
-				//i_CalibrationFlag = ((inl(devpriv->iobase+i_Offset + 12) & 0x00060000) >> 17);
+				/* i_CalibrationFlag = ((inl(devpriv->iobase+i_Offset + 12) & 0x00060000) >> 17); */
 				i_CalibrationFlag =
 					((inl(devpriv->iobase +
 							s_BoardInfos[dev->
@@ -3251,19 +3244,19 @@ void v_APCI3200_Interrupt(int irq, void *d)
 				/*Read the channel number */
 	      /*************************/
 
-				//ui_ChannelNumber = inl(devpriv->iobase+i_Offset + 24);
+				/* ui_ChannelNumber = inl(devpriv->iobase+i_Offset + 24); */
 				ui_ChannelNumber =
 					inl(devpriv->iobase +
 					s_BoardInfos[dev->minor].i_Offset + 24);
-				//Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+				/* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 				s_BoardInfos[dev->minor].ui_Channel_num =
 					ui_ChannelNumber;
-				//End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+				/* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 
 	      /************************************/
 				/*Read the digital temperature value */
 	      /************************************/
-				//ui_DigitalTemperature = inl(devpriv->iobase+i_Offset + 28);
+				/* ui_DigitalTemperature = inl(devpriv->iobase+i_Offset + 28); */
 				ui_DigitalTemperature =
 					inl(devpriv->iobase +
 					s_BoardInfos[dev->minor].i_Offset + 28);
@@ -3274,7 +3267,7 @@ void v_APCI3200_Interrupt(int irq, void *d)
 
 				if ((i_CalibrationFlag == 0)
 					&& (i_CJCFlag == 0)) {
-					//ui_InterruptChannelValue[i_Count + 0]=ui_DigitalTemperature;
+					/* ui_InterruptChannelValue[i_Count + 0]=ui_DigitalTemperature; */
 					s_BoardInfos[dev->minor].
 						ui_InterruptChannelValue
 						[s_BoardInfos[dev->minor].
@@ -3287,7 +3280,7 @@ void v_APCI3200_Interrupt(int irq, void *d)
 					i_APCI3200_ReadCJCValue(dev,
 						&ui_DummyValue);
 
-				}	//if ((i_CalibrationFlag == 0) && (i_CJCFlag == 0))
+				}	/* if ((i_CalibrationFlag == 0) && (i_CJCFlag == 0)) */
 
 		 /*****************************************/
 				/*Test if the value read is the CJC value */
@@ -3295,7 +3288,7 @@ void v_APCI3200_Interrupt(int irq, void *d)
 
 				if ((i_CJCFlag == 1)
 					&& (i_CalibrationFlag == 0)) {
-					//ui_InterruptChannelValue[i_Count + 3]=ui_DigitalTemperature;
+					/* ui_InterruptChannelValue[i_Count + 3]=ui_DigitalTemperature; */
 					s_BoardInfos[dev->minor].
 						ui_InterruptChannelValue
 						[s_BoardInfos[dev->minor].
@@ -3307,7 +3300,7 @@ void v_APCI3200_Interrupt(int irq, void *d)
 		  /******************************************************/
 					i_APCI3200_ReadCalibrationOffsetValue
 						(dev, &ui_DummyValue);
-				}	// if ((i_CJCFlag == 1) && (i_CalibrationFlag == 0))
+				}	/*  if ((i_CJCFlag == 1) && (i_CalibrationFlag == 0)) */
 
 		 /********************************************************/
 				/*Test if the value read is the calibration offset value */
@@ -3315,7 +3308,7 @@ void v_APCI3200_Interrupt(int irq, void *d)
 
 				if ((i_CalibrationFlag == 1)
 					&& (i_CJCFlag == 0)) {
-					//ui_InterruptChannelValue[i_Count + 1]=ui_DigitalTemperature;
+					/* ui_InterruptChannelValue[i_Count + 1]=ui_DigitalTemperature; */
 					s_BoardInfos[dev->minor].
 						ui_InterruptChannelValue
 						[s_BoardInfos[dev->minor].
@@ -3328,7 +3321,7 @@ void v_APCI3200_Interrupt(int irq, void *d)
 					i_APCI3200_ReadCalibrationGainValue(dev,
 						&ui_DummyValue);
 
-				}	//if ((i_CalibrationFlag == 1) && (i_CJCFlag == 0))
+				}	/* if ((i_CalibrationFlag == 1) && (i_CJCFlag == 0)) */
 
 	      /******************************************************/
 				/*Test if the value read is the calibration gain value */
@@ -3336,7 +3329,7 @@ void v_APCI3200_Interrupt(int irq, void *d)
 
 				if ((i_CalibrationFlag == 2)
 					&& (i_CJCFlag == 0)) {
-					//ui_InterruptChannelValue[i_Count + 2]=ui_DigitalTemperature;
+					/* ui_InterruptChannelValue[i_Count + 2]=ui_DigitalTemperature; */
 					s_BoardInfos[dev->minor].
 						ui_InterruptChannelValue
 						[s_BoardInfos[dev->minor].
@@ -3349,15 +3342,15 @@ void v_APCI3200_Interrupt(int irq, void *d)
 
 					/*Test if the polarity is the same */
 		  /**********************************/
-					//if(i_CJCPolarity!=i_ADDIDATAPolarity)
+					/* if(i_CJCPolarity!=i_ADDIDATAPolarity) */
 					if (s_BoardInfos[dev->minor].
 						i_CJCPolarity !=
 						s_BoardInfos[dev->minor].
 						i_ADDIDATAPolarity) {
 						i_ConvertCJCCalibration = 1;
-					}	//if(i_CJCPolarity!=i_ADDIDATAPolarity)
+					}	/* if(i_CJCPolarity!=i_ADDIDATAPolarity) */
 					else {
-						//if(i_CJCGain==i_ADDIDATAGain)
+						/* if(i_CJCGain==i_ADDIDATAGain) */
 						if (s_BoardInfos[dev->minor].
 							i_CJCGain ==
 							s_BoardInfos[dev->
@@ -3365,12 +3358,12 @@ void v_APCI3200_Interrupt(int irq, void *d)
 							i_ADDIDATAGain) {
 							i_ConvertCJCCalibration
 								= 0;
-						}	//if(i_CJCGain==i_ADDIDATAGain)
+						}	/* if(i_CJCGain==i_ADDIDATAGain) */
 						else {
 							i_ConvertCJCCalibration
 								= 1;
-						}	//elseif(i_CJCGain==i_ADDIDATAGain)
-					}	//elseif(i_CJCPolarity!=i_ADDIDATAPolarity)
+						}	/* elseif(i_CJCGain==i_ADDIDATAGain) */
+					}	/* elseif(i_CJCPolarity!=i_ADDIDATAPolarity) */
 					if (i_ConvertCJCCalibration == 1) {
 		      /****************************************************************/
 						/*Start the conversion of the calibration gain value for the CJC */
@@ -3378,10 +3371,10 @@ void v_APCI3200_Interrupt(int irq, void *d)
 						i_APCI3200_ReadCJCCalOffset(dev,
 							&ui_DummyValue);
 
-					}	//if(i_ConvertCJCCalibration==1)
+					}	/* if(i_ConvertCJCCalibration==1) */
 					else {
-						//ui_InterruptChannelValue[i_Count + 4]=0;
-						//ui_InterruptChannelValue[i_Count + 5]=0;
+						/* ui_InterruptChannelValue[i_Count + 4]=0; */
+						/* ui_InterruptChannelValue[i_Count + 5]=0; */
 						s_BoardInfos[dev->minor].
 							ui_InterruptChannelValue
 							[s_BoardInfos[dev->
@@ -3392,8 +3385,8 @@ void v_APCI3200_Interrupt(int irq, void *d)
 							[s_BoardInfos[dev->
 								minor].i_Count +
 							5] = 0;
-					}	//elseif(i_ConvertCJCCalibration==1)
-				}	//else if ((i_CalibrationFlag == 2) && (i_CJCFlag == 0))
+					}	/* elseif(i_ConvertCJCCalibration==1) */
+				}	/* else if ((i_CalibrationFlag == 2) && (i_CJCFlag == 0)) */
 
 		 /********************************************************************/
 				/*Test if the value read is the calibration offset value for the CJC */
@@ -3401,7 +3394,7 @@ void v_APCI3200_Interrupt(int irq, void *d)
 
 				if ((i_CalibrationFlag == 1)
 					&& (i_CJCFlag == 1)) {
-					//ui_InterruptChannelValue[i_Count + 4]=ui_DigitalTemperature;
+					/* ui_InterruptChannelValue[i_Count + 4]=ui_DigitalTemperature; */
 					s_BoardInfos[dev->minor].
 						ui_InterruptChannelValue
 						[s_BoardInfos[dev->minor].
@@ -3414,7 +3407,7 @@ void v_APCI3200_Interrupt(int irq, void *d)
 					i_APCI3200_ReadCJCCalGain(dev,
 						&ui_DummyValue);
 
-				}	//if ((i_CalibrationFlag == 1) && (i_CJCFlag == 1))
+				}	/* if ((i_CalibrationFlag == 1) && (i_CJCFlag == 1)) */
 
 	      /******************************************************************/
 				/*Test if the value read is the calibration gain value for the CJC */
@@ -3422,61 +3415,61 @@ void v_APCI3200_Interrupt(int irq, void *d)
 
 				if ((i_CalibrationFlag == 2)
 					&& (i_CJCFlag == 1)) {
-					//ui_InterruptChannelValue[i_Count + 5]=ui_DigitalTemperature;
+					/* ui_InterruptChannelValue[i_Count + 5]=ui_DigitalTemperature; */
 					s_BoardInfos[dev->minor].
 						ui_InterruptChannelValue
 						[s_BoardInfos[dev->minor].
 						i_Count + 5] =
 						ui_DigitalTemperature;
 
-					//if(i_ScanType==1)
+					/* if(i_ScanType==1) */
 					if (s_BoardInfos[dev->minor].
 						i_ScanType == 1) {
 
-						//i_InterruptFlag=0;
+						/* i_InterruptFlag=0; */
 						s_BoardInfos[dev->minor].
 							i_InterruptFlag = 0;
-						//i_Count=i_Count + 6;
-						//Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
-						//s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count + 6;
+						/* i_Count=i_Count + 6; */
+						/* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+						/* s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count + 6; */
 						s_BoardInfos[dev->minor].
 							i_Count =
 							s_BoardInfos[dev->
 							minor].i_Count + 9;
-						//End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
-					}	//if(i_ScanType==1)
+						/* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+					}	/* if(i_ScanType==1) */
 					else {
-						//i_Count=0;
+						/* i_Count=0; */
 						s_BoardInfos[dev->minor].
 							i_Count = 0;
-					}	//elseif(i_ScanType==1)
+					}	/* elseif(i_ScanType==1) */
 
-					//if(i_ScanType!=1)
+					/* if(i_ScanType!=1) */
 					if (s_BoardInfos[dev->minor].
 						i_ScanType != 1) {
-						send_sig(SIGIO, devpriv->tsk_Current, 0);	// send signal to the sample
-					}	//if(i_ScanType!=1)
+						send_sig(SIGIO, devpriv->tsk_Current, 0);	/*  send signal to the sample */
+					}	/* if(i_ScanType!=1) */
 					else {
-						//if(i_ChannelCount==i_Sum)
+						/* if(i_ChannelCount==i_Sum) */
 						if (s_BoardInfos[dev->minor].
 							i_ChannelCount ==
 							s_BoardInfos[dev->
 								minor].i_Sum) {
-							send_sig(SIGIO, devpriv->tsk_Current, 0);	// send signal to the sample
+							send_sig(SIGIO, devpriv->tsk_Current, 0);	/*  send signal to the sample */
 
-						}	//if(i_ChannelCount==i_Sum)
-					}	//else if(i_ScanType!=1)
-				}	//if ((i_CalibrationFlag == 2) && (i_CJCFlag == 1))
+						}	/* if(i_ChannelCount==i_Sum) */
+					}	/* else if(i_ScanType!=1) */
+				}	/* if ((i_CalibrationFlag == 2) && (i_CJCFlag == 1)) */
 
-			}	//else if ((ui_StatusRegister & 0x2) == 0x2)
+			}	/* else if ((ui_StatusRegister & 0x2) == 0x2) */
 			break;
-		}		//switch(i_ADDIDATAType)
+		}		/* switch(i_ADDIDATAType) */
 		break;
 	case 2:
 	case 3:
 		i_APCI3200_InterruptHandleEos(dev);
 		break;
-	}			//switch(i_ScanType)
+	}			/* switch(i_ScanType) */
 	return;
 }
 
@@ -3499,22 +3492,22 @@ void v_APCI3200_Interrupt(int irq, void *d)
   |                    													     |
   +----------------------------------------------------------------------------+
 */
-int i_APCI3200_InterruptHandleEos(struct comedi_device * dev)
+int i_APCI3200_InterruptHandleEos(struct comedi_device *dev)
 {
-	UINT ui_StatusRegister = 0;
+	unsigned int ui_StatusRegister = 0;
 	struct comedi_subdevice *s = dev->subdevices + 0;
 
-	//BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
-	//comedi_async *async = s->async;
-	//UINT *data;
-	//data=async->data+async->buf_int_ptr;//new samples added from here onwards
+	/* BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+	/* comedi_async *async = s->async; */
+	/* UINT *data; */
+	/* data=async->data+async->buf_int_ptr;//new samples added from here onwards */
 	int n = 0, i = 0;
-	//END JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
+	/* END JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
 
   /************************************/
 	/*Read the interrupt status register */
   /************************************/
-	//ui_StatusRegister = inl(devpriv->iobase+i_Offset + 16);
+	/* ui_StatusRegister = inl(devpriv->iobase+i_Offset + 16); */
 	ui_StatusRegister =
 		inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 16);
 
@@ -3526,33 +3519,33 @@ int i_APCI3200_InterruptHandleEos(struct comedi_device * dev)
       /*************************/
 		/*Read the channel number */
       /*************************/
-		//ui_ChannelNumber = inl(devpriv->iobase+i_Offset + 24);
-		//BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
-		//This value is not used
-		//ui_ChannelNumber = inl(devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 24);
+		/* ui_ChannelNumber = inl(devpriv->iobase+i_Offset + 24); */
+		/* BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+		/* This value is not used */
+		/* ui_ChannelNumber = inl(devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 24); */
 		s->async->events = 0;
-		//END JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
+		/* END JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
 
       /*************************************/
 		/*Read the digital Analog Input value */
       /*************************************/
 
-		//data[i_Count] = inl(devpriv->iobase+i_Offset + 28);
-		//Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
-		//data[s_BoardInfos [dev->minor].i_Count] = inl(devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 28);
+		/* data[i_Count] = inl(devpriv->iobase+i_Offset + 28); */
+		/* Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+		/* data[s_BoardInfos [dev->minor].i_Count] = inl(devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 28); */
 		s_BoardInfos[dev->minor].ui_ScanValueArray[s_BoardInfos[dev->
 				minor].i_Count] =
 			inl(devpriv->iobase +
 			s_BoardInfos[dev->minor].i_Offset + 28);
-		//End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
+		/* End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
 
-		//if((i_Count == (i_LastChannel-i_FirstChannel+3)))
+		/* if((i_Count == (i_LastChannel-i_FirstChannel+3))) */
 		if ((s_BoardInfos[dev->minor].i_Count ==
 				(s_BoardInfos[dev->minor].i_LastChannel -
 					s_BoardInfos[dev->minor].
 					i_FirstChannel + 3))) {
 
-			//Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+			/* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 			s_BoardInfos[dev->minor].i_Count++;
 
 			for (i = s_BoardInfos[dev->minor].i_FirstChannel;
@@ -3582,61 +3575,61 @@ int i_APCI3200_InterruptHandleEos(struct comedi_device * dev)
 							* 3) + 2]);
 			}
 
-			//End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+			/* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 
-			//i_Count=-1;
+			/* i_Count=-1; */
 
 			s_BoardInfos[dev->minor].i_Count = -1;
 
-			//async->buf_int_count+=(i_LastChannel-i_FirstChannel+4)*sizeof(UINT);
-			//Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
-			//async->buf_int_count+=(s_BoardInfos [dev->minor].i_LastChannel-s_BoardInfos [dev->minor].i_FirstChannel+4)*sizeof(UINT);
-			//End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
-			//async->buf_int_ptr+=(i_LastChannel-i_FirstChannel+4)*sizeof(UINT);
-			//Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
-			//async->buf_int_ptr+=(s_BoardInfos [dev->minor].i_LastChannel-s_BoardInfos [dev->minor].i_FirstChannel+4)*sizeof(UINT);
-			//comedi_eos(dev,s);
+			/* async->buf_int_count+=(i_LastChannel-i_FirstChannel+4)*sizeof(unsigned int); */
+			/* Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+			/* async->buf_int_count+=(s_BoardInfos [dev->minor].i_LastChannel-s_BoardInfos [dev->minor].i_FirstChannel+4)*sizeof(unsigned int); */
+			/* End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+			/* async->buf_int_ptr+=(i_LastChannel-i_FirstChannel+4)*sizeof(unsigned int); */
+			/* Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+			/* async->buf_int_ptr+=(s_BoardInfos [dev->minor].i_LastChannel-s_BoardInfos [dev->minor].i_FirstChannel+4)*sizeof(unsigned int); */
+			/* comedi_eos(dev,s); */
 
-			// Set the event type (Comedi Buffer End Of Scan)
+			/*  Set the event type (Comedi Buffer End Of Scan) */
 			s->async->events |= COMEDI_CB_EOS;
 
-			// Test if enougth memory is available and allocate it for 7 values
-			//n = comedi_buf_write_alloc(s->async, 7*sizeof(unsigned int));
+			/*  Test if enougth memory is available and allocate it for 7 values */
+			/* n = comedi_buf_write_alloc(s->async, 7*sizeof(unsigned int)); */
 			n = comedi_buf_write_alloc(s->async,
 				(7 + 12) * sizeof(unsigned int));
 
-			// If not enougth memory available, event is set to Comedi Buffer Errror
+			/*  If not enougth memory available, event is set to Comedi Buffer Errror */
 			if (n > ((7 + 12) * sizeof(unsigned int))) {
 				printk("\ncomedi_buf_write_alloc n = %i", n);
 				s->async->events |= COMEDI_CB_ERROR;
 			}
-			// Write all 7 scan values in the comedi buffer
+			/*  Write all 7 scan values in the comedi buffer */
 			comedi_buf_memcpy_to(s->async, 0,
 				(unsigned int *) s_BoardInfos[dev->minor].
 				ui_ScanValueArray, (7 + 12) * sizeof(unsigned int));
 
-			// Update comedi buffer pinters indexes
+			/*  Update comedi buffer pinters indexes */
 			comedi_buf_write_free(s->async,
 				(7 + 12) * sizeof(unsigned int));
 
-			// Send events
+			/*  Send events */
 			comedi_event(dev, s);
-			//End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
-
-			//BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
-			//
-			//if (s->async->buf_int_ptr>=s->async->data_len) //  for buffer rool over
-			//  {
-			//    /* buffer rollover */
-			//    s->async->buf_int_ptr=0;
-			//    comedi_eobuf(dev,s);
-			//  }
-			//End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
+			/* End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+
+			/* BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+			/*  */
+			/* if (s->async->buf_int_ptr>=s->async->data_len) //  for buffer rool over */
+			/*   { */
+			/*     /* buffer rollover */ */
+			/*     s->async->buf_int_ptr=0; */
+			/*     comedi_eobuf(dev,s); */
+			/*   } */
+			/* End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
 		}
-		//i_Count++;
+		/* i_Count++; */
 		s_BoardInfos[dev->minor].i_Count++;
 	}
-	//i_InterruptFlag=0;
+	/* i_InterruptFlag=0; */
 	s_BoardInfos[dev->minor].i_InterruptFlag = 0;
 	return 0;
 }
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.h
index a6f57f55e79..f3e7ebf8c1f 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.h
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.h
@@ -15,26 +15,26 @@
  * any later version.
  */
 
-// Card Specific information
+/* Card Specific information */
 #define APCI3200_BOARD_VENDOR_ID                 0x15B8
-//#define APCI3200_ADDRESS_RANGE                   264
+/* #define APCI3200_ADDRESS_RANGE                   264 */
 
 int MODULE_NO;
 struct {
-	INT i_Gain;
-	INT i_Polarity;
-	INT i_OffsetRange;
-	INT i_Coupling;
-	INT i_SingleDiff;
-	INT i_AutoCalibration;
-	UINT ui_ReloadValue;
-	UINT ui_TimeUnitReloadVal;
-	INT i_Interrupt;
-	INT i_ModuleSelection;
+	int i_Gain;
+	int i_Polarity;
+	int i_OffsetRange;
+	int i_Coupling;
+	int i_SingleDiff;
+	int i_AutoCalibration;
+	unsigned int ui_ReloadValue;
+	unsigned int ui_TimeUnitReloadVal;
+	int i_Interrupt;
+	int i_ModuleSelection;
 } Config_Parameters_Module1, Config_Parameters_Module2,
     Config_Parameters_Module3, Config_Parameters_Module4;
 
-//ANALOG INPUT RANGE
+/* ANALOG INPUT RANGE */
 static const struct comedi_lrange range_apci3200_ai = { 8, {
 						     BIP_RANGE(10),
 						     BIP_RANGE(5),
@@ -55,7 +55,7 @@ static const struct comedi_lrange range_apci3300_ai = { 4, {
 						     }
 };
 
-//Analog Input related Defines
+/* Analog Input related Defines */
 #define APCI3200_AI_OFFSET_GAIN                  0
 #define APCI3200_AI_SC_TEST                      4
 #define APCI3200_AI_IRQ                          8
@@ -89,98 +89,102 @@ static const struct comedi_lrange range_apci3300_ai = { 4, {
 #define ADDIDATA_UNIPOLAR                        1
 #define ADDIDATA_BIPOLAR                         2
 
-//BEGIN JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+/* BEGIN JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 #define MAX_MODULE				4
-//END JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+/* END JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 
-typedef struct {
-	ULONG ul_NumberOfValue;
-	ULONG *pul_ResistanceValue;
-	ULONG *pul_TemperatureValue;
-} str_ADDIDATA_RTDStruct, *pstr_ADDIDATA_RTDStruct;
+struct str_ADDIDATA_RTDStruct {
+	unsigned int ul_NumberOfValue;
+	unsigned int *pul_ResistanceValue;
+	unsigned int *pul_TemperatureValue;
+};
+
+/* BEGIN JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+struct str_Module {
 
-//BEGIN JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
-typedef struct {
-	// Begin JK 05/08/2003 change for Linux
+	/*  Begin JK 05/08/2003 change for Linux */
 	unsigned long ul_CurrentSourceCJC;
 	unsigned long ul_CurrentSource[5];
-	// End JK 05/08/2003 change for Linux
+	/*  End JK 05/08/2003 change for Linux */
 
-	// Begin CG 15/02/02 Rev 1.0 -> Rev 1.1 : Add Header Type 1
-	unsigned long ul_GainFactor[8];	// Gain Factor
+	/*  Begin CG 15/02/02 Rev 1.0 -> Rev 1.1 : Add Header Type 1 */
+	unsigned long ul_GainFactor[8];	/*  Gain Factor */
 	unsigned int w_GainValue[10];
-	// End CG 15/02/02 Rev 1.0 -> Rev 1.1 : Add Header Type 1
-} str_Module;
-//END JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
-
-//BEGIN JK 06.07.04: Management of sevrals boards
-typedef struct {
-	INT i_CJCAvailable;
-	INT i_CJCPolarity;
-	INT i_CJCGain;
-	INT i_InterruptFlag;
-	INT i_ADDIDATAPolarity;
-	INT i_ADDIDATAGain;
-	INT i_AutoCalibration;
-	INT i_ADDIDATAConversionTime;
-	INT i_ADDIDATAConversionTimeUnit;
-	INT i_ADDIDATAType;
-	INT i_ChannelNo;
-	INT i_ChannelCount;
-	INT i_ScanType;
-	INT i_FirstChannel;
-	INT i_LastChannel;
-	INT i_Sum;
-	INT i_Offset;
-	UINT ui_Channel_num;
-	INT i_Count;
-	INT i_Initialised;
-	//UINT ui_InterruptChannelValue[96]; //Buffer
-	UINT ui_InterruptChannelValue[144];	//Buffer
-	BYTE b_StructInitialized;
-	//Begin JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
-	unsigned int ui_ScanValueArray[7 + 12];	// 7 is the maximal number of channels
-	//End JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
-
-	//Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
-	INT i_ConnectionType;
-	INT i_NbrOfModule;
-	str_Module s_Module[MAX_MODULE];
-	//End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
-} str_BoardInfos;
-//END JK 06.07.04: Management of sevrals boards
-
-// Hardware Layer  functions for Apci3200
-
-//AI
-
-INT i_APCI3200_ConfigAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
+	/*  End CG 15/02/02 Rev 1.0 -> Rev 1.1 : Add Header Type 1 */
+};
+
+/* END JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+
+/* BEGIN JK 06.07.04: Management of sevrals boards */
+struct str_BoardInfos {
+
+	int i_CJCAvailable;
+	int i_CJCPolarity;
+	int i_CJCGain;
+	int i_InterruptFlag;
+	int i_ADDIDATAPolarity;
+	int i_ADDIDATAGain;
+	int i_AutoCalibration;
+	int i_ADDIDATAConversionTime;
+	int i_ADDIDATAConversionTimeUnit;
+	int i_ADDIDATAType;
+	int i_ChannelNo;
+	int i_ChannelCount;
+	int i_ScanType;
+	int i_FirstChannel;
+	int i_LastChannel;
+	int i_Sum;
+	int i_Offset;
+	unsigned int ui_Channel_num;
+	int i_Count;
+	int i_Initialised;
+	/* UINT ui_InterruptChannelValue[96]; //Buffer */
+	unsigned int ui_InterruptChannelValue[144];	/* Buffer */
+	unsigned char b_StructInitialized;
+	/* Begin JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+	unsigned int ui_ScanValueArray[7 + 12];	/*  7 is the maximal number of channels */
+	/* End JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */
+
+	/* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+	int i_ConnectionType;
+	int i_NbrOfModule;
+	struct str_Module s_Module[MAX_MODULE];
+	/* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
+};
+
+/* END JK 06.07.04: Management of sevrals boards */
+
+/* Hardware Layer  functions for Apci3200 */
+
+/* AI */
+
+int i_APCI3200_ConfigAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
 				 struct comedi_insn *insn, unsigned int *data);
-INT i_APCI3200_ReadAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI3200_ReadAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
 			       struct comedi_insn *insn, unsigned int *data);
-INT i_APCI3200_InsnWriteReleaseAnalogInput(struct comedi_device *dev,
+int i_APCI3200_InsnWriteReleaseAnalogInput(struct comedi_device *dev,
 					   struct comedi_subdevice *s,
 					   struct comedi_insn *insn, unsigned int *data);
-INT i_APCI3200_InsnBits_AnalogInput_Test(struct comedi_device *dev,
+int i_APCI3200_InsnBits_AnalogInput_Test(struct comedi_device *dev,
 					 struct comedi_subdevice *s,
 					 struct comedi_insn *insn, unsigned int *data);
-INT i_APCI3200_StopCyclicAcquisition(struct comedi_device *dev, struct comedi_subdevice *s);
-INT i_APCI3200_InterruptHandleEos(struct comedi_device *dev);
-INT i_APCI3200_CommandTestAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI3200_StopCyclicAcquisition(struct comedi_device *dev, struct comedi_subdevice *s);
+int i_APCI3200_InterruptHandleEos(struct comedi_device *dev);
+int i_APCI3200_CommandTestAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
 				      struct comedi_cmd *cmd);
-INT i_APCI3200_CommandAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s);
-INT i_APCI3200_ReadDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI3200_CommandAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s);
+int i_APCI3200_ReadDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
 				struct comedi_insn *insn, unsigned int *data);
-//Interrupt
+/* Interrupt */
 void v_APCI3200_Interrupt(int irq, void *d);
 int i_APCI3200_InterruptHandleEos(struct comedi_device *dev);
-//Reset functions
-INT i_APCI3200_Reset(struct comedi_device *dev);
+/* Reset functions */
+int i_APCI3200_Reset(struct comedi_device *dev);
 
 int i_APCI3200_ReadCJCCalOffset(struct comedi_device *dev, unsigned int *data);
 int i_APCI3200_ReadCJCValue(struct comedi_device *dev, unsigned int *data);
-int i_APCI3200_ReadCalibrationGainValue(struct comedi_device *dev, UINT *data);
-int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device *dev, UINT *data);
+int i_APCI3200_ReadCalibrationGainValue(struct comedi_device *dev, unsigned int *data);
+int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device *dev, unsigned int *data);
 int i_APCI3200_Read1AnalogInputChannel(struct comedi_device *dev,
 				       struct comedi_subdevice *s, struct comedi_insn *insn,
 				       unsigned int *data);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.c
index 20391a91da0..ef21f03fc96 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.c
@@ -3,13 +3,13 @@
 
 Copyright (C) 2004,2005  ADDI-DATA GmbH for the source code of this module.
 
-        ADDI-DATA GmbH
-        Dieselstrasse 3
-        D-77833 Ottersweier
-        Tel: +19(0)7223/9493-0
-        Fax: +49(0)7223/9493-92
-        http://www.addi-data-com
-        info@addi-data.com
+	ADDI-DATA GmbH
+	Dieselstrasse 3
+	D-77833 Ottersweier
+	Tel: +19(0)7223/9493-0
+	Fax: +49(0)7223/9493-92
+	http://www.addi-data-com
+	info@addi-data.com
 
 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
 
@@ -62,8 +62,8 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 | Task              : Read  value  of the selected channel or port           |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev      : Driver handle                |
-|                     UINT ui_NoOfChannels    : No Of Channels To read       |
-|                     UINT *data              : Data Pointer to read status  |
+|                     unsigned int ui_NoOfChannels    : No Of Channels To read       |
+|                     unsigned int *data              : Data Pointer to read status  |
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
 +----------------------------------------------------------------------------+
@@ -73,26 +73,26 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 +----------------------------------------------------------------------------+
 */
 
-INT i_APCI3501_ReadDigitalInput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI3501_ReadDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_Temp;
-	UINT ui_NoOfChannel;
+	unsigned int ui_Temp;
+	unsigned int ui_NoOfChannel;
 	ui_NoOfChannel = CR_CHAN(insn->chanspec);
 	ui_Temp = data[0];
 	*data = inl(devpriv->iobase + APCI3501_DIGITAL_IP);
 	if (ui_Temp == 0) {
 		*data = (*data >> ui_NoOfChannel) & 0x1;
-	}			//if  (ui_Temp==0)
+	}			/* if  (ui_Temp==0) */
 	else {
 		if (ui_Temp == 1) {
 
 			*data = *data & 0x3;
-		}		//if  (ui_Temp==1)
+		}		/* if  (ui_Temp==1) */
 		else {
 			printk("\nSpecified channel not supported \n");
-		}		//elseif  (ui_Temp==1)
-	}			//elseif  (ui_Temp==0)
+		}		/* elseif  (ui_Temp==1) */
+	}			/* elseif  (ui_Temp==0) */
 	return insn->n;
 }
 
@@ -105,7 +105,7 @@ INT i_APCI3501_ReadDigitalInput(struct comedi_device * dev, struct comedi_subdev
 | Task              : Configures The Digital Output Subdevice.               |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev : Driver handle                     |
-|                     UINT *data         : Data Pointer contains             |
+|                     unsigned int *data         : Data Pointer contains             |
 |                                          configuration parameters as below |
 |                                                                            |
 |					  data[1]            : 1 Enable  VCC  Interrupt  |
@@ -121,21 +121,21 @@ INT i_APCI3501_ReadDigitalInput(struct comedi_device * dev, struct comedi_subdev
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-int i_APCI3501_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI3501_ConfigDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 
 	if ((data[0] != 0) && (data[0] != 1)) {
 		comedi_error(dev,
 			"Not a valid Data !!! ,Data should be 1 or 0\n");
 		return -EINVAL;
-	}			//if  ( (data[0]!=0) && (data[0]!=1) )
+	}			/* if  ( (data[0]!=0) && (data[0]!=1) ) */
 	if (data[0]) {
 		devpriv->b_OutputMemoryStatus = ADDIDATA_ENABLE;
-	}			// if  (data[0])
+	}			/*  if  (data[0]) */
 	else {
 		devpriv->b_OutputMemoryStatus = ADDIDATA_DISABLE;
-	}			//else if  (data[0])
+	}			/* else if  (data[0]) */
 	return insn->n;
 }
 
@@ -161,33 +161,33 @@ int i_APCI3501_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_sub
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-INT i_APCI3501_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI3501_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_Temp, ui_Temp1;
-	UINT ui_NoOfChannel = CR_CHAN(insn->chanspec);	// get the channel
+	unsigned int ui_Temp, ui_Temp1;
+	unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec);	/*  get the channel */
 	if (devpriv->b_OutputMemoryStatus) {
 		ui_Temp = inl(devpriv->iobase + APCI3501_DIGITAL_OP);
-	}			//if(devpriv->b_OutputMemoryStatus )
+	}			/* if(devpriv->b_OutputMemoryStatus ) */
 	else {
 		ui_Temp = 0;
-	}			//if(devpriv->b_OutputMemoryStatus )
+	}			/* if(devpriv->b_OutputMemoryStatus ) */
 	if (data[3] == 0) {
 		if (data[1] == 0) {
 			data[0] = (data[0] << ui_NoOfChannel) | ui_Temp;
 			outl(data[0], devpriv->iobase + APCI3501_DIGITAL_OP);
-		}		//if(data[1]==0)
+		}		/* if(data[1]==0) */
 		else {
 			if (data[1] == 1) {
 				data[0] = (data[0] << (2 * data[2])) | ui_Temp;
 				outl(data[0],
 					devpriv->iobase + APCI3501_DIGITAL_OP);
-			}	// if(data[1]==1)
+			}	/*  if(data[1]==1) */
 			else {
 				printk("\nSpecified channel not supported\n");
-			}	//else if(data[1]==1)
-		}		//elseif(data[1]==0)
-	}			//if(data[3]==0)
+			}	/* else if(data[1]==1) */
+		}		/* elseif(data[1]==0) */
+	}			/* if(data[3]==0) */
 	else {
 		if (data[3] == 1) {
 			if (data[1] == 0) {
@@ -201,7 +201,7 @@ INT i_APCI3501_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 				data[0] = data[0] & ui_Temp;
 				outl(data[0],
 					devpriv->iobase + APCI3501_DIGITAL_OP);
-			}	//if(data[1]==0)
+			}	/* if(data[1]==0) */
 			else {
 				if (data[1] == 1) {
 					data[0] = ~data[0] & 0x3;
@@ -215,17 +215,17 @@ INT i_APCI3501_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 					outl(data[0],
 						devpriv->iobase +
 						APCI3501_DIGITAL_OP);
-				}	// if(data[1]==1)
+				}	/*  if(data[1]==1) */
 				else {
 					printk("\nSpecified channel not supported\n");
-				}	//else if(data[1]==1)
-			}	//elseif(data[1]==0)
-		}		//if(data[3]==1);
+				}	/* else if(data[1]==1) */
+			}	/* elseif(data[1]==0) */
+		}		/* if(data[3]==1); */
 		else {
 			printk("\nSpecified functionality does not exist\n");
 			return -EINVAL;
-		}		//if else data[3]==1)
-	}			//if else data[3]==0)
+		}		/* if else data[3]==1) */
+	}			/* if else data[3]==0) */
 	return insn->n;
 }
 
@@ -238,8 +238,8 @@ INT i_APCI3501_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 | Task              : Read  value  of the selected channel or port           |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev      : Driver handle                |
-|                     UINT ui_NoOfChannels    : No Of Channels To read       |
-|                     UINT *data              : Data Pointer to read status  |
+|                     unsigned int ui_NoOfChannels    : No Of Channels To read       |
+|                     unsigned int *data              : Data Pointer to read status  |
 +----------------------------------------------------------------------------+
 | Output Parameters :	--													 |
 +----------------------------------------------------------------------------+
@@ -248,27 +248,27 @@ INT i_APCI3501_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-INT i_APCI3501_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI3501_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	UINT ui_Temp;
-	UINT ui_NoOfChannel;
+	unsigned int ui_Temp;
+	unsigned int ui_NoOfChannel;
 
 	ui_NoOfChannel = CR_CHAN(insn->chanspec);
 	ui_Temp = data[0];
 	*data = inl(devpriv->iobase + APCI3501_DIGITAL_OP);
 	if (ui_Temp == 0) {
 		*data = (*data >> ui_NoOfChannel) & 0x1;
-	}			// if  (ui_Temp==0)
+	}			/*  if  (ui_Temp==0) */
 	else {
 		if (ui_Temp == 1) {
 			*data = *data & 0x3;
 
-		}		// if  (ui_Temp==1)
+		}		/*  if  (ui_Temp==1) */
 		else {
 			printk("\nSpecified channel not supported \n");
-		}		// else if (ui_Temp==1)
-	}			// else if  (ui_Temp==0)
+		}		/*  else if (ui_Temp==1) */
+	}			/*  else if  (ui_Temp==0) */
 	return insn->n;
 }
 
@@ -298,8 +298,8 @@ INT i_APCI3501_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subde
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-INT i_APCI3501_ConfigAnalogOutput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI3501_ConfigAnalogOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	outl(data[0],
 		devpriv->iobase + APCI3501_ANALOG_OUTPUT +
@@ -336,10 +336,10 @@ INT i_APCI3501_ConfigAnalogOutput(struct comedi_device * dev, struct comedi_subd
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-INT i_APCI3501_WriteAnalogOutput(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+int i_APCI3501_WriteAnalogOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	ULONG ul_Command1 = 0, ul_Channel_no, ul_Polarity, ul_DAC_Ready = 0;;
+	unsigned int ul_Command1 = 0, ul_Channel_no, ul_Polarity, ul_DAC_Ready = 0;;
 
 	ul_Channel_no = CR_CHAN(insn->chanspec);
 
@@ -349,18 +349,18 @@ INT i_APCI3501_WriteAnalogOutput(struct comedi_device * dev, struct comedi_subde
 			printk("\nIn WriteAnalogOutput :: Not Valid Data\n");
 		}
 
-	}			// end if(devpriv->b_InterruptMode==MODE1)
+	}			/*  end if(devpriv->b_InterruptMode==MODE1) */
 	else {
 		ul_Polarity = 0;
 		if ((*data < 0) || (*data > 8192)) {
 			printk("\nIn WriteAnalogOutput :: Not Valid Data\n");
 		}
 
-	}			// end else
+	}			/*  end else */
 
 	if ((ul_Channel_no < 0) || (ul_Channel_no > 7)) {
 		printk("\nIn WriteAnalogOutput :: Not Valid Channel\n");
-	}			// end if((ul_Channel_no<0)||(ul_Channel_no>7))
+	}			/*  end if((ul_Channel_no<0)||(ul_Channel_no>7)) */
 
 	ul_DAC_Ready = inl(devpriv->iobase + APCI3501_ANALOG_OUTPUT);
 
@@ -370,11 +370,11 @@ INT i_APCI3501_WriteAnalogOutput(struct comedi_device * dev, struct comedi_subde
 	}
 
 	if (ul_DAC_Ready) {
-// Output the Value on the output channels.
+/* Output the Value on the output channels. */
 		ul_Command1 =
-			(ULONG) ((ULONG) (ul_Channel_no & 0xFF) |
-			(ULONG) ((*data << 0x8) & 0x7FFFFF00L) |
-			(ULONG) (ul_Polarity));
+			(unsigned int) ((unsigned int) (ul_Channel_no & 0xFF) |
+			(unsigned int) ((*data << 0x8) & 0x7FFFFF00L) |
+			(unsigned int) (ul_Polarity));
 		outl(ul_Command1,
 			devpriv->iobase + APCI3501_ANALOG_OUTPUT +
 			APCI3501_AO_PROG);
@@ -392,7 +392,7 @@ INT i_APCI3501_WriteAnalogOutput(struct comedi_device * dev, struct comedi_subde
 | Task              : Configures The Timer , Counter or Watchdog             |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev : Driver handle                     |
-|                     UINT *data         : Data Pointer contains             |
+|                     unsigned int *data         : Data Pointer contains             |
 |                                          configuration parameters as below |
 |                                                                            |
 |					  data[0]            : 0 Configure As Timer      |
@@ -410,78 +410,78 @@ INT i_APCI3501_WriteAnalogOutput(struct comedi_device * dev, struct comedi_subde
 |			                                                         |
 +----------------------------------------------------------------------------+
 */
-INT i_APCI3501_ConfigTimerCounterWatchdog(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI3501_ConfigTimerCounterWatchdog(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	ULONG ul_Command1 = 0;
+	unsigned int ul_Command1 = 0;
 	devpriv->tsk_Current = current;
 	if (data[0] == ADDIDATA_WATCHDOG) {
 
 		devpriv->b_TimerSelectMode = ADDIDATA_WATCHDOG;
-		//Disable the watchdog
-		outl(0x0, devpriv->iobase + APCI3501_WATCHDOG + APCI3501_TCW_PROG);	//disable Wa
+		/* Disable the watchdog */
+		outl(0x0, devpriv->iobase + APCI3501_WATCHDOG + APCI3501_TCW_PROG);	/* disable Wa */
 
 		if (data[1] == 1) {
-			//Enable TIMER int & DISABLE ALL THE OTHER int SOURCES
+			/* Enable TIMER int & DISABLE ALL THE OTHER int SOURCES */
 			outl(0x02,
 				devpriv->iobase + APCI3501_WATCHDOG +
 				APCI3501_TCW_PROG);
 		} else {
-			outl(0x0, devpriv->iobase + APCI3501_WATCHDOG + APCI3501_TCW_PROG);	//disable Timer interrupt
+			outl(0x0, devpriv->iobase + APCI3501_WATCHDOG + APCI3501_TCW_PROG);	/* disable Timer interrupt */
 		}
 
-		//Loading the Timebase value
+		/* Loading the Timebase value */
 		outl(data[2],
 			devpriv->iobase + APCI3501_WATCHDOG +
 			APCI3501_TCW_TIMEBASE);
 
-		//Loading the Reload value
+		/* Loading the Reload value */
 		outl(data[3],
 			devpriv->iobase + APCI3501_WATCHDOG +
 			APCI3501_TCW_RELOAD_VALUE);
-		//Set the mode
-		ul_Command1 = inl(devpriv->iobase + APCI3501_WATCHDOG + APCI3501_TCW_PROG) | 0xFFF819E0UL;	//e2->e0
+		/* Set the mode */
+		ul_Command1 = inl(devpriv->iobase + APCI3501_WATCHDOG + APCI3501_TCW_PROG) | 0xFFF819E0UL;	/* e2->e0 */
 		outl(ul_Command1,
 			devpriv->iobase + APCI3501_WATCHDOG +
 			APCI3501_TCW_PROG);
-	}			//end if(data[0]==ADDIDATA_WATCHDOG)
+	}			/* end if(data[0]==ADDIDATA_WATCHDOG) */
 
 	else if (data[0] == ADDIDATA_TIMER) {
-		//First Stop The Timer
+		/* First Stop The Timer */
 		ul_Command1 =
 			inl(devpriv->iobase + APCI3501_WATCHDOG +
 			APCI3501_TCW_PROG);
 		ul_Command1 = ul_Command1 & 0xFFFFF9FEUL;
-		outl(ul_Command1, devpriv->iobase + APCI3501_WATCHDOG + APCI3501_TCW_PROG);	//Stop The Timer
+		outl(ul_Command1, devpriv->iobase + APCI3501_WATCHDOG + APCI3501_TCW_PROG);	/* Stop The Timer */
 		devpriv->b_TimerSelectMode = ADDIDATA_TIMER;
 		if (data[1] == 1) {
-			//Enable TIMER int & DISABLE ALL THE OTHER int SOURCES
+			/* Enable TIMER int & DISABLE ALL THE OTHER int SOURCES */
 			outl(0x02,
 				devpriv->iobase + APCI3501_WATCHDOG +
 				APCI3501_TCW_PROG);
 		} else {
-			outl(0x0, devpriv->iobase + APCI3501_WATCHDOG + APCI3501_TCW_PROG);	//disable Timer interrupt
+			outl(0x0, devpriv->iobase + APCI3501_WATCHDOG + APCI3501_TCW_PROG);	/* disable Timer interrupt */
 		}
 
-		// Loading Timebase
+		/*  Loading Timebase */
 		outl(data[2],
 			devpriv->iobase + APCI3501_WATCHDOG +
 			APCI3501_TCW_TIMEBASE);
 
-		//Loading the Reload value
+		/* Loading the Reload value */
 		outl(data[3],
 			devpriv->iobase + APCI3501_WATCHDOG +
 			APCI3501_TCW_RELOAD_VALUE);
 
-		// printk ("\nTimer Address :: %x\n", (devpriv->iobase+APCI3501_WATCHDOG));
+		/*  printk ("\nTimer Address :: %x\n", (devpriv->iobase+APCI3501_WATCHDOG)); */
 		ul_Command1 =
 			inl(devpriv->iobase + APCI3501_WATCHDOG +
 			APCI3501_TCW_PROG);
 		ul_Command1 =
 			(ul_Command1 & 0xFFF719E2UL) | 2UL << 13UL | 0x10UL;
-		outl(ul_Command1, devpriv->iobase + APCI3501_WATCHDOG + APCI3501_TCW_PROG);	//mode 2
+		outl(ul_Command1, devpriv->iobase + APCI3501_WATCHDOG + APCI3501_TCW_PROG);	/* mode 2 */
 
-	}			//end if(data[0]==ADDIDATA_TIMER)
+	}			/* end if(data[0]==ADDIDATA_TIMER) */
 
 	return insn->n;
 }
@@ -495,7 +495,7 @@ INT i_APCI3501_ConfigTimerCounterWatchdog(struct comedi_device * dev,
 | Task              : Start / Stop The Selected Timer , Counter or Watchdog  |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev : Driver handle                     |
-|                     UINT *data         : Data Pointer contains             |
+|                     unsigned int *data         : Data Pointer contains             |
 |                                          configuration parameters as below |
 |                                                                            |
 |					  data[0]            : 0 Timer                   |
@@ -511,10 +511,10 @@ INT i_APCI3501_ConfigTimerCounterWatchdog(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3501_StartStopWriteTimerCounterWatchdog(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI3501_StartStopWriteTimerCounterWatchdog(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	ULONG ul_Command1 = 0;
+	unsigned int ul_Command1 = 0;
 	int i_Temp;
 	if (devpriv->b_TimerSelectMode == ADDIDATA_WATCHDOG) {
 
@@ -523,15 +523,15 @@ int i_APCI3501_StartStopWriteTimerCounterWatchdog(struct comedi_device * dev,
 				inl(devpriv->iobase + APCI3501_WATCHDOG +
 				APCI3501_TCW_PROG);
 			ul_Command1 = (ul_Command1 & 0xFFFFF9FFUL) | 0x1UL;
-			//Enable the Watchdog
+			/* Enable the Watchdog */
 			outl(ul_Command1,
 				devpriv->iobase + APCI3501_WATCHDOG +
 				APCI3501_TCW_PROG);
 		}
 
-		else if (data[1] == 0)	//Stop The Watchdog
+		else if (data[1] == 0)	/* Stop The Watchdog */
 		{
-			//Stop The Watchdog
+			/* Stop The Watchdog */
 			ul_Command1 =
 				inl(devpriv->iobase + APCI3501_WATCHDOG +
 				APCI3501_TCW_PROG);
@@ -547,8 +547,8 @@ int i_APCI3501_StartStopWriteTimerCounterWatchdog(struct comedi_device * dev,
 			outl(ul_Command1,
 				devpriv->iobase + APCI3501_WATCHDOG +
 				APCI3501_TCW_PROG);
-		}		//if(data[1]==2)
-	}			// end if (devpriv->b_TimerSelectMode==ADDIDATA_WATCHDOG)
+		}		/* if(data[1]==2) */
+	}			/*  end if (devpriv->b_TimerSelectMode==ADDIDATA_WATCHDOG) */
 
 	if (devpriv->b_TimerSelectMode == ADDIDATA_TIMER) {
 		if (data[1] == 1) {
@@ -557,12 +557,12 @@ int i_APCI3501_StartStopWriteTimerCounterWatchdog(struct comedi_device * dev,
 				inl(devpriv->iobase + APCI3501_WATCHDOG +
 				APCI3501_TCW_PROG);
 			ul_Command1 = (ul_Command1 & 0xFFFFF9FFUL) | 0x1UL;
-			//Enable the Timer
+			/* Enable the Timer */
 			outl(ul_Command1,
 				devpriv->iobase + APCI3501_WATCHDOG +
 				APCI3501_TCW_PROG);
 		} else if (data[1] == 0) {
-			//Stop The Timer
+			/* Stop The Timer */
 			ul_Command1 =
 				inl(devpriv->iobase + APCI3501_WATCHDOG +
 				APCI3501_TCW_PROG);
@@ -573,7 +573,7 @@ int i_APCI3501_StartStopWriteTimerCounterWatchdog(struct comedi_device * dev,
 		}
 
 		else if (data[1] == 2) {
-			//Trigger the Timer
+			/* Trigger the Timer */
 			ul_Command1 =
 				inl(devpriv->iobase + APCI3501_WATCHDOG +
 				APCI3501_TCW_PROG);
@@ -583,7 +583,7 @@ int i_APCI3501_StartStopWriteTimerCounterWatchdog(struct comedi_device * dev,
 				APCI3501_TCW_PROG);
 		}
 
-	}			// end if (devpriv->b_TimerSelectMode==ADDIDATA_TIMER)
+	}			/*  end if (devpriv->b_TimerSelectMode==ADDIDATA_TIMER) */
 	i_Temp = inl(devpriv->iobase + APCI3501_WATCHDOG +
 		APCI3501_TCW_TRIG_STATUS) & 0x1;
 	return insn->n;
@@ -598,7 +598,7 @@ int i_APCI3501_StartStopWriteTimerCounterWatchdog(struct comedi_device * dev,
 | Task              : Read The Selected Timer , Counter or Watchdog          |
 +----------------------------------------------------------------------------+
 | Input Parameters  : struct comedi_device *dev : Driver handle                     |
-|                     UINT *data         : Data Pointer contains             |
+|                     unsigned int *data         : Data Pointer contains             |
 |                                          configuration parameters as below |
 |                                                                            |
 |					  data[0]            : 0 Timer                   |
@@ -613,8 +613,8 @@ int i_APCI3501_StartStopWriteTimerCounterWatchdog(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3501_ReadTimerCounterWatchdog(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI3501_ReadTimerCounterWatchdog(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 
 	if (devpriv->b_TimerSelectMode == ADDIDATA_WATCHDOG) {
@@ -622,14 +622,14 @@ int i_APCI3501_ReadTimerCounterWatchdog(struct comedi_device * dev,
 			inl(devpriv->iobase + APCI3501_WATCHDOG +
 			APCI3501_TCW_TRIG_STATUS) & 0x1;
 		data[1] = inl(devpriv->iobase + APCI3501_WATCHDOG);
-	}			// end if  (devpriv->b_TimerSelectMode==ADDIDATA_WATCHDOG)
+	}			/*  end if  (devpriv->b_TimerSelectMode==ADDIDATA_WATCHDOG) */
 
 	else if (devpriv->b_TimerSelectMode == ADDIDATA_TIMER) {
 		data[0] =
 			inl(devpriv->iobase + APCI3501_WATCHDOG +
 			APCI3501_TCW_TRIG_STATUS) & 0x1;
 		data[1] = inl(devpriv->iobase + APCI3501_WATCHDOG);
-	}			// end if  (devpriv->b_TimerSelectMode==ADDIDATA_TIMER)
+	}			/*  end if  (devpriv->b_TimerSelectMode==ADDIDATA_TIMER) */
 
 	else if ((devpriv->b_TimerSelectMode != ADDIDATA_TIMER)
 		&& (devpriv->b_TimerSelectMode != ADDIDATA_WATCHDOG)) {
@@ -654,10 +654,10 @@ int i_APCI3501_ReadTimerCounterWatchdog(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3501_Reset(struct comedi_device * dev)
+int i_APCI3501_Reset(struct comedi_device *dev)
 {
 	int i_Count = 0, i_temp = 0;
-	ULONG ul_Command1 = 0, ul_Polarity, ul_DAC_Ready = 0;
+	unsigned int ul_Command1 = 0, ul_Polarity, ul_DAC_Ready = 0;
 	outl(0x0, devpriv->iobase + APCI3501_DIGITAL_OP);
 	outl(1, devpriv->iobase + APCI3501_ANALOG_OUTPUT +
 		APCI3501_AO_VOLT_MODE);
@@ -674,11 +674,11 @@ int i_APCI3501_Reset(struct comedi_device * dev)
 		}
 
 		if (ul_DAC_Ready) {
-			// Output the Value on the output channels.
+			/*  Output the Value on the output channels. */
 			ul_Command1 =
-				(ULONG) ((ULONG) (i_Count & 0xFF) |
-				(ULONG) ((i_temp << 0x8) & 0x7FFFFF00L) |
-				(ULONG) (ul_Polarity));
+				(unsigned int) ((unsigned int) (i_Count & 0xFF) |
+				(unsigned int) ((i_temp << 0x8) & 0x7FFFFF00L) |
+				(unsigned int) (ul_Polarity));
 			outl(ul_Command1,
 				devpriv->iobase + APCI3501_ANALOG_OUTPUT +
 				APCI3501_AO_PROG);
@@ -711,7 +711,7 @@ void v_APCI3501_Interrupt(int irq, void *d)
 	struct comedi_device *dev = d;
 	unsigned int ui_Timer_AOWatchdog;
 	unsigned long ul_Command1;
-	// Disable Interrupt
+	/*  Disable Interrupt */
 	ul_Command1 =
 		inl(devpriv->iobase + APCI3501_WATCHDOG + APCI3501_TCW_PROG);
 
@@ -728,8 +728,9 @@ void v_APCI3501_Interrupt(int irq, void *d)
 		return;
 	}
 
-	// Enable Interrupt
-	//Send a signal to from kernel to user space
+/*
+* Enable Interrupt Send a signal to from kernel to user space
+*/
 	send_sig(SIGIO, devpriv->tsk_Current, 0);
 	ul_Command1 =
 		inl(devpriv->iobase + APCI3501_WATCHDOG + APCI3501_TCW_PROG);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.h
index 51e7b66544a..c456d75674b 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.h
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.h
@@ -15,7 +15,7 @@
  * any later version.
  */
 
-// Card Specific information
+/* Card Specific information */
 #define APCI3501_BOARD_VENDOR_ID                 0x15B8
 #define APCI3501_ADDRESS_RANGE                   255
 
@@ -23,7 +23,7 @@
 #define APCI3501_DIGITAL_OP                       0x40
 #define APCI3501_ANALOG_OUTPUT                    0x00
 
-//Analog Output related Defines
+/* Analog Output related Defines */
 #define APCI3501_AO_VOLT_MODE                     0
 #define APCI3501_AO_PROG                          4
 #define APCI3501_AO_TRIG_SCS                      8
@@ -31,14 +31,14 @@
 #define BIPOLAR                                   1
 #define MODE0                                     0
 #define MODE1                                     1
-// ANALOG OUTPUT RANGE
+/* ANALOG OUTPUT RANGE */
 struct comedi_lrange range_apci3501_ao = { 2, {
 					BIP_RANGE(10),
 					UNI_RANGE(10)
 					}
 };
 
-//Watchdog Related Defines
+/* Watchdog Related Defines */
 
 #define APCI3501_WATCHDOG                         0x20
 #define APCI3501_TCW_SYNC_ENABLEDISABLE           0
@@ -52,32 +52,36 @@ struct comedi_lrange range_apci3501_ao = { 2, {
 #define ADDIDATA_TIMER                            0
 #define ADDIDATA_WATCHDOG                         2
 
-// Hardware Layer  functions for Apci3501
+/* Hardware Layer  functions for Apci3501 */
 
-//AO
-INT i_APCI3501_ConfigAnalogOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+/* AO */
+int i_APCI3501_ConfigAnalogOutput(struct comedi_device *dev, struct comedi_subdevice *s,
 				  struct comedi_insn *insn, unsigned int *data);
-INT i_APCI3501_WriteAnalogOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI3501_WriteAnalogOutput(struct comedi_device *dev, struct comedi_subdevice *s,
 				 struct comedi_insn *insn, unsigned int *data);
 
-//DI
-// for di read
-//INT i_APCI3501_ReadDigitalInput(struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data);
+/*
+* DI for di read INT i_APCI3501_ReadDigitalInput(struct
+* comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn
+* *insn,unsigned int *data);
+*/
 
-INT i_APCI3501_ReadDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI3501_ReadDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
 				struct comedi_insn *insn, unsigned int *data);
 
-//DO
+/* DO */
 int i_APCI3501_ConfigDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
 				   struct comedi_insn *insn, unsigned int *data);
-INT i_APCI3501_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI3501_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
 				  struct comedi_insn *insn, unsigned int *data);
-INT i_APCI3501_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
+int i_APCI3501_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s,
 				 struct comedi_insn *insn, unsigned int *data);
 
-// TIMER
-// timer value is passed as u seconds
-INT i_APCI3501_ConfigTimerCounterWatchdog(struct comedi_device *dev,
+/* TIMER
+ * timer value is passed as u seconds
+ */
+
+int i_APCI3501_ConfigTimerCounterWatchdog(struct comedi_device *dev,
 					  struct comedi_subdevice *s,
 					  struct comedi_insn *insn, unsigned int *data);
 int i_APCI3501_StartStopWriteTimerCounterWatchdog(struct comedi_device *dev,
@@ -87,8 +91,8 @@ int i_APCI3501_StartStopWriteTimerCounterWatchdog(struct comedi_device *dev,
 int i_APCI3501_ReadTimerCounterWatchdog(struct comedi_device *dev,
 					struct comedi_subdevice *s,
 					struct comedi_insn *insn, unsigned int *data);
-//Interrupt
+/* Interrupt */
 void v_APCI3501_Interrupt(int irq, void *d);
 
-//Reset functions
+/* Reset functions */
 int i_APCI3501_Reset(struct comedi_device *dev);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.c
index b7268e4da64..33872787982 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.c
@@ -3,13 +3,13 @@
 
 Copyright (C) 2004,2005  ADDI-DATA GmbH for the source code of this module.
 
-        ADDI-DATA GmbH
-        Dieselstrasse 3
-        D-77833 Ottersweier
-        Tel: +19(0)7223/9493-0
-        Fax: +49(0)7223/9493-92
-        http://www.addi-data-com
-        info@addi-data.com
+	ADDI-DATA GmbH
+	Dieselstrasse 3
+	D-77833 Ottersweier
+	Tel: +19(0)7223/9493-0
+	Fax: +49(0)7223/9493-92
+	http://www.addi-data-com
+	info@addi-data.com
 
 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
 
@@ -54,7 +54,7 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 
 /*
 +----------------------------------------------------------------------------+
-| Function Name     : INT   i_APCI3XXX_TestConversionStarted                 |
+| Function Name     : int   i_APCI3XXX_TestConversionStarted                 |
 |                          (struct comedi_device    *dev)                           |
 +----------------------------------------------------------------------------+
 | Task                Test if any conversion started                         |
@@ -68,18 +68,18 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3XXX_TestConversionStarted(struct comedi_device * dev)
+int i_APCI3XXX_TestConversionStarted(struct comedi_device *dev)
 {
-	if ((readl((void *)(devpriv->dw_AiBase + 8)) & 0x80000UL) == 0x80000UL) {
-		return (1);
-	} else {
-		return (0);
-	}
+	if ((readl((void *)(devpriv->dw_AiBase + 8)) & 0x80000UL) == 0x80000UL)
+		return 1;
+	else
+		return 0;
+
 }
 
 /*
 +----------------------------------------------------------------------------+
-| Function Name     : INT   i_APCI3XXX_AnalogInputConfigOperatingMode        |
+| Function Name     : int   i_APCI3XXX_AnalogInputConfigOperatingMode        |
 |                          (struct comedi_device    *dev,                           |
 |                           struct comedi_subdevice *s,                             |
 |                           struct comedi_insn      *insn,                          |
@@ -87,9 +87,9 @@ int i_APCI3XXX_TestConversionStarted(struct comedi_device * dev)
 +----------------------------------------------------------------------------+
 | Task           Converting mode and convert time selection                  |
 +----------------------------------------------------------------------------+
-| Input Parameters  : b_SingleDiff  = (BYTE)  data[1];                       |
-|                     b_TimeBase    = (BYTE)  data[2]; (0: ns, 1:micros 2:ms)|
-|                    dw_ReloadValue = (DWORD) data[3];                       |
+| Input Parameters  : b_SingleDiff  = (unsigned char)  data[1];                       |
+|                     b_TimeBase    = (unsigned char)  data[2]; (0: ns, 1:micros 2:ms)|
+|                    dw_ReloadValue = (unsigned int) data[3];                       |
 |                     ........                                               |
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
@@ -105,14 +105,14 @@ int i_APCI3XXX_TestConversionStarted(struct comedi_device * dev)
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3XXX_AnalogInputConfigOperatingMode(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI3XXX_AnalogInputConfigOperatingMode(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = insn->n;
-	BYTE b_TimeBase = 0;
-	BYTE b_SingleDiff = 0;
-	DWORD dw_ReloadValue = 0;
-	DWORD dw_TestReloadValue = 0;
+	int i_ReturnValue = insn->n;
+	unsigned char b_TimeBase = 0;
+	unsigned char b_SingleDiff = 0;
+	unsigned int dw_ReloadValue = 0;
+	unsigned int dw_TestReloadValue = 0;
 
 	/************************/
 	/* Test the buffer size */
@@ -123,19 +123,19 @@ int i_APCI3XXX_AnalogInputConfigOperatingMode(struct comedi_device * dev,
 		/* Get the Singel/Diff flag */
 	   /****************************/
 
-		b_SingleDiff = (BYTE) data[1];
+		b_SingleDiff = (unsigned char) data[1];
 
 	   /****************************/
 		/* Get the time base unitiy */
 	   /****************************/
 
-		b_TimeBase = (BYTE) data[2];
+		b_TimeBase = (unsigned char) data[2];
 
 	   /*************************************/
 		/* Get the convert time reload value */
 	   /*************************************/
 
-		dw_ReloadValue = (DWORD) data[3];
+		dw_ReloadValue = (unsigned int) data[3];
 
 	   /**********************/
 		/* Test the time base */
@@ -186,7 +186,7 @@ int i_APCI3XXX_AnalogInputConfigOperatingMode(struct comedi_device * dev,
 								devpriv->
 									ui_EocEosConversionTime
 									=
-									(UINT)
+									(unsigned int)
 									dw_ReloadValue;
 								devpriv->
 									b_EocEosConversionTimeBase
@@ -204,7 +204,7 @@ int i_APCI3XXX_AnalogInputConfigOperatingMode(struct comedi_device * dev,
 								/* Set the convert timing unit */
 			      /*******************************/
 
-								writel((DWORD)
+								writel((unsigned int)
 									b_TimeBase,
 									(void *)
 									(devpriv->
@@ -268,12 +268,12 @@ int i_APCI3XXX_AnalogInputConfigOperatingMode(struct comedi_device * dev,
 		i_ReturnValue = -101;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
-| Function Name     : INT   i_APCI3XXX_InsnConfigAnalogInput                 |
+| Function Name     : int   i_APCI3XXX_InsnConfigAnalogInput                 |
 |                          (struct comedi_device    *dev,                           |
 |                           struct comedi_subdevice *s,                             |
 |                           struct comedi_insn      *insn,                          |
@@ -281,9 +281,9 @@ int i_APCI3XXX_AnalogInputConfigOperatingMode(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 | Task           Converting mode and convert time selection                  |
 +----------------------------------------------------------------------------+
-| Input Parameters  : b_ConvertMode = (BYTE)  data[0];                       |
-|                     b_TimeBase    = (BYTE)  data[1]; (0: ns, 1:micros 2:ms)|
-|                    dw_ReloadValue = (DWORD) data[2];                       |
+| Input Parameters  : b_ConvertMode = (unsigned char)  data[0];                       |
+|                     b_TimeBase    = (unsigned char)  data[1]; (0: ns, 1:micros 2:ms)|
+|                    dw_ReloadValue = (unsigned int) data[2];                       |
 |                     ........                                               |
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
@@ -295,17 +295,17 @@ int i_APCI3XXX_AnalogInputConfigOperatingMode(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3XXX_InsnConfigAnalogInput(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI3XXX_InsnConfigAnalogInput(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = insn->n;
+	int i_ReturnValue = insn->n;
 
 	/************************/
 	/* Test the buffer size */
 	/************************/
 
 	if (insn->n >= 1) {
-		switch ((BYTE) data[0]) {
+		switch ((unsigned char) data[0]) {
 		case APCI3XXX_CONFIGURATION:
 			i_ReturnValue =
 				i_APCI3XXX_AnalogInputConfigOperatingMode(dev,
@@ -326,12 +326,12 @@ int i_APCI3XXX_InsnConfigAnalogInput(struct comedi_device * dev,
 		i_ReturnValue = -101;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
-| Function Name     : INT   i_APCI3XXX_InsnReadAnalogInput                   |
+| Function Name     : int   i_APCI3XXX_InsnReadAnalogInput                   |
 |                          (struct comedi_device    *dev,                           |
 |                           struct comedi_subdevice *s,                             |
 |                           struct comedi_insn      *insn,                          |
@@ -355,16 +355,16 @@ int i_APCI3XXX_InsnConfigAnalogInput(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3XXX_InsnReadAnalogInput(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI3XXX_InsnReadAnalogInput(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = insn->n;
-	BYTE b_Configuration = (BYTE) CR_RANGE(insn->chanspec);
-	BYTE b_Channel = (BYTE) CR_CHAN(insn->chanspec);
-	DWORD dw_Temp = 0;
-	DWORD dw_Configuration = 0;
-	DWORD dw_AcquisitionCpt = 0;
-	BYTE b_Interrupt = 0;
+	int i_ReturnValue = insn->n;
+	unsigned char b_Configuration = (unsigned char) CR_RANGE(insn->chanspec);
+	unsigned char b_Channel = (unsigned char) CR_CHAN(insn->chanspec);
+	unsigned int dw_Temp = 0;
+	unsigned int dw_Configuration = 0;
+	unsigned int dw_AcquisitionCpt = 0;
+	unsigned char b_Interrupt = 0;
 
 	/*************************************/
 	/* Test if operating mode configured */
@@ -449,8 +449,8 @@ int i_APCI3XXX_InsnReadAnalogInput(struct comedi_device * dev,
 
 					dw_Configuration =
 						(b_Configuration & 3) |
-						((DWORD) (b_Configuration >> 2)
-						<< 6) | ((DWORD) devpriv->
+						((unsigned int) (b_Configuration >> 2)
+						<< 6) | ((unsigned int) devpriv->
 						b_SingelDiff << 7);
 
 		    /***************************/
@@ -468,7 +468,7 @@ int i_APCI3XXX_InsnReadAnalogInput(struct comedi_device * dev,
 					writel(dw_Temp | 0x100UL,
 						(void *)(devpriv->dw_AiBase +
 							4));
-					writel((DWORD) b_Channel,
+					writel((unsigned int) b_Channel,
 						(void *)(devpriv->dw_AiBase +
 							0));
 
@@ -535,8 +535,7 @@ int i_APCI3XXX_InsnReadAnalogInput(struct comedi_device * dev,
 								dw_Temp =
 									dw_Temp
 									& 1;
-							}
-							while (dw_Temp != 1);
+							} while (dw_Temp != 1);
 
 			  /*************************/
 							/* Read the analog value */
@@ -585,7 +584,7 @@ int i_APCI3XXX_InsnReadAnalogInput(struct comedi_device * dev,
 		printk("Operating mode not configured\n");
 		i_ReturnValue = -1;
 	}
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
@@ -607,15 +606,15 @@ int i_APCI3XXX_InsnReadAnalogInput(struct comedi_device * dev,
 void v_APCI3XXX_Interrupt(int irq, void *d)
 {
 	struct comedi_device *dev = d;
-	BYTE b_CopyCpt = 0;
-	DWORD dw_Status = 0;
+	unsigned char b_CopyCpt = 0;
+	unsigned int dw_Status = 0;
 
 	/***************************/
 	/* Test if interrupt occur */
 	/***************************/
 
-	if (((dw_Status = readl((void *)(devpriv->dw_AiBase + 16))) & 0x2UL) ==
-		0x2UL) {
+	dw_Status = readl((void *)(devpriv->dw_AiBase + 16));
+	if ( (dw_Status & 0x2UL) == 0x2UL) {
 	   /***********************/
 		/* Reset the interrupt */
 	   /***********************/
@@ -635,7 +634,7 @@ void v_APCI3XXX_Interrupt(int irq, void *d)
 				b_CopyCpt < devpriv->ui_AiNbrofChannels;
 				b_CopyCpt++) {
 				devpriv->ui_AiReadData[b_CopyCpt] =
-					(UINT) readl((void *)(devpriv->
+					(unsigned int) readl((void *)(devpriv->
 						dw_AiBase + 28));
 			}
 
@@ -662,7 +661,7 @@ void v_APCI3XXX_Interrupt(int irq, void *d)
 
 /*
 +----------------------------------------------------------------------------+
-| Function Name     : INT   i_APCI3XXX_InsnWriteAnalogOutput                 |
+| Function Name     : int   i_APCI3XXX_InsnWriteAnalogOutput                 |
 |                          (struct comedi_device    *dev,                           |
 |                           struct comedi_subdevice *s,                             |
 |                           struct comedi_insn      *insn,                          |
@@ -684,13 +683,13 @@ void v_APCI3XXX_Interrupt(int irq, void *d)
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3XXX_InsnWriteAnalogOutput(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI3XXX_InsnWriteAnalogOutput(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	BYTE b_Range = (BYTE) CR_RANGE(insn->chanspec);
-	BYTE b_Channel = (BYTE) CR_CHAN(insn->chanspec);
-	DWORD dw_Status = 0;
-	INT i_ReturnValue = insn->n;
+	unsigned char b_Range = (unsigned char) CR_RANGE(insn->chanspec);
+	unsigned char b_Channel = (unsigned char) CR_CHAN(insn->chanspec);
+	unsigned int dw_Status = 0;
+	int i_ReturnValue = insn->n;
 
 	/************************/
 	/* Test the buffer size */
@@ -729,8 +728,7 @@ int i_APCI3XXX_InsnWriteAnalogOutput(struct comedi_device * dev,
 					dw_Status =
 						readl((void *)(devpriv->
 							dw_AiBase + 96));
-				}
-				while ((dw_Status & 0x100) != 0x100);
+				} while ((dw_Status & 0x100) != 0x100);
 			} else {
 		 /***************************/
 				/* Channel not initialised */
@@ -757,7 +755,7 @@ int i_APCI3XXX_InsnWriteAnalogOutput(struct comedi_device * dev,
 		i_ReturnValue = -101;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
@@ -768,7 +766,7 @@ int i_APCI3XXX_InsnWriteAnalogOutput(struct comedi_device * dev,
 
 /*
 +----------------------------------------------------------------------------+
-| Function Name     : INT   i_APCI3XXX_InsnConfigInitTTLIO                   |
+| Function Name     : int   i_APCI3XXX_InsnConfigInitTTLIO                   |
 |                          (struct comedi_device    *dev,                           |
 |                           struct comedi_subdevice *s,                             |
 |                           struct comedi_insn      *insn,                          |
@@ -778,8 +776,8 @@ int i_APCI3XXX_InsnWriteAnalogOutput(struct comedi_device * dev,
 |                for you call any other function witch access of TTL.        |
 |                APCI3XXX_TTL_INIT_DIRECTION_PORT2(user inputs for direction)|
 +----------------------------------------------------------------------------+
-| Input Parameters  : b_InitType    = (BYTE) data[0];                        |
-|                     b_Port2Mode   = (BYTE) data[1];                        |
+| Input Parameters  : b_InitType    = (unsigned char) data[0];                        |
+|                     b_Port2Mode   = (unsigned char) data[1];                        |
 +----------------------------------------------------------------------------+
 | Output Parameters : -                                                      |
 +----------------------------------------------------------------------------+
@@ -791,11 +789,11 @@ int i_APCI3XXX_InsnWriteAnalogOutput(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3XXX_InsnConfigInitTTLIO(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI3XXX_InsnConfigInitTTLIO(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = insn->n;
-	BYTE b_Command = 0;
+	int i_ReturnValue = insn->n;
+	unsigned char b_Command = 0;
 
 	/************************/
 	/* Test the buffer size */
@@ -806,7 +804,7 @@ int i_APCI3XXX_InsnConfigInitTTLIO(struct comedi_device * dev,
 		/* Get the command */
 		/* **************** */
 
-		b_Command = (BYTE) data[0];
+		b_Command = (unsigned char) data[0];
 
 	   /********************/
 		/* Test the command */
@@ -888,7 +886,7 @@ int i_APCI3XXX_InsnConfigInitTTLIO(struct comedi_device * dev,
 		}
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
@@ -899,7 +897,7 @@ int i_APCI3XXX_InsnConfigInitTTLIO(struct comedi_device * dev,
 
 /*
 +----------------------------------------------------------------------------+
-| Function Name     : INT     i_APCI3XXX_InsnBitsTTLIO                       |
+| Function Name     : int     i_APCI3XXX_InsnBitsTTLIO                       |
 |                          (struct comedi_device    *dev,                           |
 |                           struct comedi_subdevice *s,                             |
 |                           struct comedi_insn      *insn,                          |
@@ -919,14 +917,14 @@ int i_APCI3XXX_InsnConfigInitTTLIO(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3XXX_InsnBitsTTLIO(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI3XXX_InsnBitsTTLIO(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = insn->n;
-	BYTE b_ChannelCpt = 0;
-	DWORD dw_ChannelMask = 0;
-	DWORD dw_BitMask = 0;
-	DWORD dw_Status = 0;
+	int i_ReturnValue = insn->n;
+	unsigned char b_ChannelCpt = 0;
+	unsigned int dw_ChannelMask = 0;
+	unsigned int dw_BitMask = 0;
+	unsigned int dw_Status = 0;
 
 	/************************/
 	/* Test the buffer size */
@@ -1051,12 +1049,12 @@ int i_APCI3XXX_InsnBitsTTLIO(struct comedi_device * dev,
 		i_ReturnValue = -101;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
 +----------------------------------------------------------------------------+
-| Function Name     : INT i_APCI3XXX_InsnReadTTLIO                           |
+| Function Name     : int i_APCI3XXX_InsnReadTTLIO                           |
 |                          (struct comedi_device    *dev,                           |
 |                           struct comedi_subdevice *s,                             |
 |                           struct comedi_insn      *insn,                          |
@@ -1074,11 +1072,11 @@ int i_APCI3XXX_InsnBitsTTLIO(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3XXX_InsnReadTTLIO(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI3XXX_InsnReadTTLIO(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	BYTE b_Channel = (BYTE) CR_CHAN(insn->chanspec);
-	INT i_ReturnValue = insn->n;
+	unsigned char b_Channel = (unsigned char) CR_CHAN(insn->chanspec);
+	int i_ReturnValue = insn->n;
 	unsigned int *pls_ReadData = data;
 
 	/************************/
@@ -1157,7 +1155,7 @@ int i_APCI3XXX_InsnReadTTLIO(struct comedi_device * dev,
 		i_ReturnValue = -101;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
@@ -1168,7 +1166,7 @@ int i_APCI3XXX_InsnReadTTLIO(struct comedi_device * dev,
 
 /*
 +----------------------------------------------------------------------------+
-| Function Name     : INT     i_APCI3XXX_InsnWriteTTLIO                      |
+| Function Name     : int     i_APCI3XXX_InsnWriteTTLIO                      |
 |                          (struct comedi_device    *dev,                           |
 |                           struct comedi_subdevice *s,                             |
 |                           struct comedi_insn      *insn,                          |
@@ -1187,20 +1185,20 @@ int i_APCI3XXX_InsnReadTTLIO(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3XXX_InsnWriteTTLIO(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI3XXX_InsnWriteTTLIO(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = insn->n;
-	BYTE b_Channel = (BYTE) CR_CHAN(insn->chanspec);
-	BYTE b_State = 0;
-	DWORD dw_Status = 0;
+	int i_ReturnValue = insn->n;
+	unsigned char b_Channel = (unsigned char) CR_CHAN(insn->chanspec);
+	unsigned char b_State = 0;
+	unsigned int dw_Status = 0;
 
 	/************************/
 	/* Test the buffer size */
 	/************************/
 
 	if (insn->n >= 1) {
-		b_State = (BYTE) data[0];
+		b_State = (unsigned char) data[0];
 
 	   /***********************/
 		/* Test if read port 0 */
@@ -1269,7 +1267,7 @@ int i_APCI3XXX_InsnWriteTTLIO(struct comedi_device * dev,
 		i_ReturnValue = -101;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
@@ -1298,12 +1296,12 @@ int i_APCI3XXX_InsnWriteTTLIO(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3XXX_InsnReadDigitalInput(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI3XXX_InsnReadDigitalInput(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = insn->n;
-	BYTE b_Channel = (BYTE) CR_CHAN(insn->chanspec);
-	DWORD dw_Temp = 0;
+	int i_ReturnValue = insn->n;
+	unsigned char b_Channel = (unsigned char) CR_CHAN(insn->chanspec);
+	unsigned int dw_Temp = 0;
 
 	/***************************/
 	/* Test the channel number */
@@ -1334,7 +1332,7 @@ int i_APCI3XXX_InsnReadDigitalInput(struct comedi_device * dev,
 		i_ReturnValue = -3;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
@@ -1356,11 +1354,11 @@ int i_APCI3XXX_InsnReadDigitalInput(struct comedi_device * dev,
 |                    -101 : Data size error                                  |
 +----------------------------------------------------------------------------+
 */
-int i_APCI3XXX_InsnBitsDigitalInput(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI3XXX_InsnBitsDigitalInput(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = insn->n;
-	DWORD dw_Temp = 0;
+	int i_ReturnValue = insn->n;
+	unsigned int dw_Temp = 0;
 
 	/************************/
 	/* Test the buffer size */
@@ -1378,7 +1376,7 @@ int i_APCI3XXX_InsnBitsDigitalInput(struct comedi_device * dev,
 		i_ReturnValue = -101;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
@@ -1409,14 +1407,14 @@ int i_APCI3XXX_InsnBitsDigitalInput(struct comedi_device * dev,
 |                    -101 : Data size error                                  |
 +----------------------------------------------------------------------------+
 */
-int i_APCI3XXX_InsnBitsDigitalOutput(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI3XXX_InsnBitsDigitalOutput(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = insn->n;
-	BYTE b_ChannelCpt = 0;
-	DWORD dw_ChannelMask = 0;
-	DWORD dw_BitMask = 0;
-	DWORD dw_Status = 0;
+	int i_ReturnValue = insn->n;
+	unsigned char b_ChannelCpt = 0;
+	unsigned int dw_ChannelMask = 0;
+	unsigned int dw_BitMask = 0;
+	unsigned int dw_Status = 0;
 
 	/************************/
 	/* Test the buffer size */
@@ -1481,7 +1479,7 @@ int i_APCI3XXX_InsnBitsDigitalOutput(struct comedi_device * dev,
 		i_ReturnValue = -101;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
@@ -1505,13 +1503,13 @@ int i_APCI3XXX_InsnBitsDigitalOutput(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3XXX_InsnWriteDigitalOutput(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI3XXX_InsnWriteDigitalOutput(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = insn->n;
-	BYTE b_Channel = CR_CHAN(insn->chanspec);
-	BYTE b_State = 0;
-	DWORD dw_Status = 0;
+	int i_ReturnValue = insn->n;
+	unsigned char b_Channel = CR_CHAN(insn->chanspec);
+	unsigned char b_State = 0;
+	unsigned int dw_Status = 0;
 
 	/************************/
 	/* Test the buffer size */
@@ -1527,7 +1525,7 @@ int i_APCI3XXX_InsnWriteDigitalOutput(struct comedi_device * dev,
 			/* Get the command */
 	      /*******************/
 
-			b_State = (BYTE) data[0];
+			b_State = (unsigned char) data[0];
 
 	      /********************************/
 			/* Read the digital output port */
@@ -1557,7 +1555,7 @@ int i_APCI3XXX_InsnWriteDigitalOutput(struct comedi_device * dev,
 		i_ReturnValue = -101;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
@@ -1580,12 +1578,12 @@ int i_APCI3XXX_InsnWriteDigitalOutput(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3XXX_InsnReadDigitalOutput(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+int i_APCI3XXX_InsnReadDigitalOutput(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	INT i_ReturnValue = insn->n;
-	BYTE b_Channel = CR_CHAN(insn->chanspec);
-	DWORD dw_Status = 0;
+	int i_ReturnValue = insn->n;
+	unsigned char b_Channel = CR_CHAN(insn->chanspec);
+	unsigned int dw_Status = 0;
 
 	/************************/
 	/* Test the buffer size */
@@ -1622,7 +1620,7 @@ int i_APCI3XXX_InsnReadDigitalOutput(struct comedi_device * dev,
 		i_ReturnValue = -101;
 	}
 
-	return (i_ReturnValue);
+	return i_ReturnValue;
 }
 
 /*
@@ -1638,7 +1636,7 @@ int i_APCI3XXX_InsnReadDigitalOutput(struct comedi_device * dev,
 +----------------------------------------------------------------------------+
 */
 
-int i_APCI3XXX_Reset(struct comedi_device * dev)
+int i_APCI3XXX_Reset(struct comedi_device *dev)
 {
 	unsigned char b_Cpt = 0;
 
diff --git a/drivers/staging/comedi/drivers/addi_apci_035.c b/drivers/staging/comedi/drivers/addi_apci_035.c
index bac018202fe..da454e854c4 100644
--- a/drivers/staging/comedi/drivers/addi_apci_035.c
+++ b/drivers/staging/comedi/drivers/addi_apci_035.c
@@ -1,5 +1,5 @@
 #define CONFIG_APCI_035 1
 
-#define ADDIDATA_WATCHDOG 2	// Or shold it be something else
+#define ADDIDATA_WATCHDOG 2	/*  Or shold it be something else */
 
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/adl_pci6208.c b/drivers/staging/comedi/drivers/adl_pci6208.c
index f710f551820..b4807fc7eb0 100644
--- a/drivers/staging/comedi/drivers/adl_pci6208.c
+++ b/drivers/staging/comedi/drivers/adl_pci6208.c
@@ -61,35 +61,35 @@ struct pci6208_board {
 	const char *name;
 	unsigned short dev_id;	/* `lspci` will show you this */
 	int ao_chans;
-	//int ao_bits;
+	/* int ao_bits; */
 };
 
 static const struct pci6208_board pci6208_boards[] = {
 	/*{
-	   name :  "pci6208v",
-	   dev_id       :  0x6208,      //not sure
-	   ao_chans:  8
-	   //,  ao_bits :  16
+	.name = "pci6208v",
+	.dev_id = 0x6208,      // not sure
+	.ao_chans = 8
+	   // ,	.ao_bits = 16
 	   },
 	   {
-	   name :  "pci6216v",
-	   dev_id       :  0x6208,      //not sure
-	   ao_chans:  16
-	   //,  ao_bits :  16
+	.name = "pci6216v",
+	.dev_id = 0x6208,      // not sure
+	.ao_chans = 16
+	   // ,	.ao_bits = 16
 	   }, */
 	{
-	      name:	"pci6208a",
-	      dev_id:	0x6208,
-	      ao_chans:8
-			//,     ao_bits :  16
+	.name = "pci6208a",
+	.dev_id = 0x6208,
+	.ao_chans = 8
+			/* ,	.ao_bits = 16 */
 		}
 };
 
 /* This is used by modprobe to translate PCI IDs to drivers.  Should
  * only be used for PCI and ISA-PnP devices */
 static DEFINE_PCI_DEVICE_TABLE(pci6208_pci_table) = {
-	//{ PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
-	//{ PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	/* { PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */
+	/* { PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */
 	{PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{0}
 };
@@ -107,35 +107,32 @@ struct pci6208_private {
 
 #define devpriv ((struct pci6208_private *)dev->private)
 
-static int pci6208_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int pci6208_detach(struct comedi_device * dev);
-
-#define pci6208_board_nbr \
-	(sizeof(pci6208_boards) / sizeof(struct pci6208_board))
+static int pci6208_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int pci6208_detach(struct comedi_device *dev);
 
 static struct comedi_driver driver_pci6208 = {
-      driver_name:PCI6208_DRIVER_NAME,
-      module:THIS_MODULE,
-      attach:pci6208_attach,
-      detach:pci6208_detach,
+	.driver_name = PCI6208_DRIVER_NAME,
+	.module = THIS_MODULE,
+	.attach = pci6208_attach,
+	.detach = pci6208_detach,
 };
 
 COMEDI_PCI_INITCLEANUP(driver_pci6208, pci6208_pci_table);
 
-static int pci6208_find_device(struct comedi_device * dev, int bus, int slot);
+static int pci6208_find_device(struct comedi_device *dev, int bus, int slot);
 static int
 pci6208_pci_setup(struct pci_dev *pci_dev, unsigned long *io_base_ptr,
 	int dev_minor);
 
 /*read/write functions*/
-static int pci6208_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int pci6208_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-//static int pci6208_dio_insn_bits(struct comedi_device *dev,struct comedi_subdevice *s,
-//      struct comedi_insn *insn,unsigned int *data);
-//static int pci6208_dio_insn_config(struct comedi_device *dev,struct comedi_subdevice *s,
-//      struct comedi_insn *insn,unsigned int *data);
+static int pci6208_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int pci6208_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+/* static int pci6208_dio_insn_bits(struct comedi_device *dev,struct comedi_subdevice *s, */
+/* struct comedi_insn *insn,unsigned int *data); */
+/* static int pci6208_dio_insn_config(struct comedi_device *dev,struct comedi_subdevice *s, */
+/* struct comedi_insn *insn,unsigned int *data); */
 
 /*
  * Attach is called by the Comedi core to configure the driver
@@ -143,7 +140,7 @@ static int pci6208_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice
  * in the driver structure, dev->board_ptr contains that
  * address.
  */
-static int pci6208_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int pci6208_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	int retval;
@@ -176,22 +173,22 @@ static int pci6208_attach(struct comedi_device * dev, struct comedi_devconfig *
 	s = dev->subdevices + 0;
 	/* analog output subdevice */
 	s->type = COMEDI_SUBD_AO;
-	s->subdev_flags = SDF_WRITABLE;	//anything else to add here??
+	s->subdev_flags = SDF_WRITABLE;	/* anything else to add here?? */
 	s->n_chan = thisboard->ao_chans;
-	s->maxdata = 0xffff;	//16-bit DAC
-	s->range_table = &range_bipolar10;	//this needs to be checked.
+	s->maxdata = 0xffff;	/* 16-bit DAC */
+	s->range_table = &range_bipolar10;	/* this needs to be checked. */
 	s->insn_write = pci6208_ao_winsn;
 	s->insn_read = pci6208_ao_rinsn;
 
-	//s=dev->subdevices+1;
+	/* s=dev->subdevices+1; */
 	/* digital i/o subdevice */
-	//s->type=COMEDI_SUBD_DIO;
-	//s->subdev_flags=SDF_READABLE|SDF_WRITABLE;
-	//s->n_chan=16;
-	//s->maxdata=1;
-	//s->range_table=&range_digital;
-	//s->insn_bits = pci6208_dio_insn_bits;
-	//s->insn_config = pci6208_dio_insn_config;
+	/* s->type=COMEDI_SUBD_DIO; */
+	/* s->subdev_flags=SDF_READABLE|SDF_WRITABLE; */
+	/* s->n_chan=16; */
+	/* s->maxdata=1; */
+	/* s->range_table=&range_digital; */
+	/* s->insn_bits = pci6208_dio_insn_bits; */
+	/* s->insn_config = pci6208_dio_insn_config; */
 
 	printk("attached\n");
 
@@ -206,7 +203,7 @@ static int pci6208_attach(struct comedi_device * dev, struct comedi_devconfig *
  * allocated by _attach().  dev->private and dev->subdevices are
  * deallocated automatically by the core.
  */
-static int pci6208_detach(struct comedi_device * dev)
+static int pci6208_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: pci6208: remove\n", dev->minor);
 
@@ -220,8 +217,8 @@ static int pci6208_detach(struct comedi_device * dev)
 	return 0;
 }
 
-static int pci6208_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci6208_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i = 0, Data_Read;
 	unsigned short chan = CR_CHAN(insn->chanspec);
@@ -245,8 +242,8 @@ static int pci6208_ao_winsn(struct comedi_device * dev, struct comedi_subdevice
 
 /* AO subdevices should have a read insn as well as a write insn.
  * Usually this means copying a value stored in devpriv. */
-static int pci6208_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci6208_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
@@ -262,51 +259,51 @@ static int pci6208_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice
  * useful to applications if you implement the insn_bits interface.
  * This allows packed reading/writing of the DIO channels.  The
  * comedi core can convert between insn_bits and insn_read/write */
-//static int pci6208_dio_insn_bits(struct comedi_device *dev,struct comedi_subdevice *s,
-//      struct comedi_insn *insn,unsigned int *data)
-//{
-//      if(insn->n!=2)return -EINVAL;
+/* static int pci6208_dio_insn_bits(struct comedi_device *dev,struct comedi_subdevice *s, */
+/* struct comedi_insn *insn,unsigned int *data) */
+/* { */
+/* if(insn->n!=2)return -EINVAL; */
 
 	/* The insn data is a mask in data[0] and the new data
 	 * in data[1], each channel cooresponding to a bit. */
-//      if(data[0]){
-//              s->state &= ~data[0];
-//              s->state |= data[0]&data[1];
+/* if(data[0]){ */
+/* s->state &= ~data[0]; */
+/* s->state |= data[0]&data[1]; */
 		/* Write out the new digital output lines */
-		//outw(s->state,dev->iobase + SKEL_DIO);
-//      }
+		/* outw(s->state,dev->iobase + SKEL_DIO); */
+/* } */
 
 	/* on return, data[1] contains the value of the digital
 	 * input and output lines. */
-	//data[1]=inw(dev->iobase + SKEL_DIO);
+	/* data[1]=inw(dev->iobase + SKEL_DIO); */
 	/* or we could just return the software copy of the output values if
 	 * it was a purely digital output subdevice */
-	//data[1]=s->state;
+	/* data[1]=s->state; */
 
-//      return 2;
-//}
+/* return 2; */
+/* } */
 
-//static int pci6208_dio_insn_config(struct comedi_device *dev,struct comedi_subdevice *s,
-//      struct comedi_insn *insn,unsigned int *data)
-//{
-//      int chan=CR_CHAN(insn->chanspec);
+/* static int pci6208_dio_insn_config(struct comedi_device *dev,struct comedi_subdevice *s, */
+/* struct comedi_insn *insn,unsigned int *data) */
+/* { */
+/* int chan=CR_CHAN(insn->chanspec); */
 
 	/* The input or output configuration of each digital line is
 	 * configured by a special insn_config instruction.  chanspec
 	 * contains the channel to be changed, and data[0] contains the
 	 * value COMEDI_INPUT or COMEDI_OUTPUT. */
 
-//      if(data[0]==COMEDI_OUTPUT){
-//              s->io_bits |= 1<<chan;
-//      }else{
-//              s->io_bits &= ~(1<<chan);
-//      }
-	//outw(s->io_bits,dev->iobase + SKEL_DIO_CONFIG);
+/* if(data[0]==COMEDI_OUTPUT){ */
+/* s->io_bits |= 1<<chan; */
+/* }else{ */
+/* s->io_bits &= ~(1<<chan); */
+/* } */
+	/* outw(s->io_bits,dev->iobase + SKEL_DIO_CONFIG); */
 
-//      return 1;
-//}
+/* return 1; */
+/* } */
 
-static int pci6208_find_device(struct comedi_device * dev, int bus, int slot)
+static int pci6208_find_device(struct comedi_device *dev, int bus, int slot)
 {
 	struct pci_dev *pci_dev;
 	int i;
@@ -315,11 +312,11 @@ static int pci6208_find_device(struct comedi_device * dev, int bus, int slot)
 		pci_dev != NULL;
 		pci_dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pci_dev)) {
 		if (pci_dev->vendor == PCI_VENDOR_ID_ADLINK) {
-			for (i = 0; i < pci6208_board_nbr; i++) {
+			for (i = 0; i < ARRAY_SIZE(pci6208_boards); i++) {
 				if (pci6208_boards[i].dev_id == pci_dev->device) {
-					// was a particular bus/slot requested?
+					/*  was a particular bus/slot requested? */
 					if ((bus != 0) || (slot != 0)) {
-						// are we on the wrong bus/slot?
+						/*  are we on the wrong bus/slot? */
 						if (pci_dev->bus->number
 							!= bus ||
 							PCI_SLOT(pci_dev->devfn)
@@ -346,10 +343,10 @@ static int pci6208_find_device(struct comedi_device * dev, int bus, int slot)
 		PCI_SLOT(pci_dev->devfn),
 		PCI_FUNC(pci_dev->devfn), pci_dev->irq);
 
-	// TODO: Warn about non-tested boards.
-	//switch(board->device_id)
-	//{
-	//};
+	/*  TODO: Warn about non-tested boards. */
+	/* switch(board->device_id) */
+	/* { */
+	/* }; */
 
 	devpriv->pci_dev = pci_dev;
 
@@ -362,19 +359,19 @@ pci6208_pci_setup(struct pci_dev *pci_dev, unsigned long *io_base_ptr,
 {
 	unsigned long io_base, io_range, lcr_io_base, lcr_io_range;
 
-	// Enable PCI device and request regions
+	/*  Enable PCI device and request regions */
 	if (comedi_pci_enable(pci_dev, PCI6208_DRIVER_NAME) < 0) {
 		printk("comedi%d: Failed to enable PCI device and request regions\n", dev_minor);
 		return -EIO;
 	}
-	// Read local configuration register base address [PCI_BASE_ADDRESS #1].
+	/*  Read local configuration register base address [PCI_BASE_ADDRESS #1]. */
 	lcr_io_base = pci_resource_start(pci_dev, 1);
 	lcr_io_range = pci_resource_len(pci_dev, 1);
 
 	printk("comedi%d: local config registers at address 0x%4lx [0x%4lx]\n",
 		dev_minor, lcr_io_base, lcr_io_range);
 
-	// Read PCI6208 register base address [PCI_BASE_ADDRESS #2].
+	/*  Read PCI6208 register base address [PCI_BASE_ADDRESS #2]. */
 	io_base = pci_resource_start(pci_dev, 2);
 	io_range = pci_resource_end(pci_dev, 2) - io_base + 1;
 
@@ -382,10 +379,10 @@ pci6208_pci_setup(struct pci_dev *pci_dev, unsigned long *io_base_ptr,
 		dev_minor, io_base, io_range);
 
 	*io_base_ptr = io_base;
-	//devpriv->io_range = io_range;
-	//devpriv->is_valid=0;
-	//devpriv->lcr_io_base=lcr_io_base;
-	//devpriv->lcr_io_range=lcr_io_range;
+	/* devpriv->io_range = io_range; */
+	/* devpriv->is_valid=0; */
+	/* devpriv->lcr_io_base=lcr_io_base; */
+	/* devpriv->lcr_io_range=lcr_io_range; */
 
 	return 0;
 }
diff --git a/drivers/staging/comedi/drivers/adl_pci7296.c b/drivers/staging/comedi/drivers/adl_pci7296.c
index bd0f9ab226e..d2f23a88608 100644
--- a/drivers/staging/comedi/drivers/adl_pci7296.c
+++ b/drivers/staging/comedi/drivers/adl_pci7296.c
@@ -39,7 +39,7 @@ Configuration Options:
 
 #include "comedi_pci.h"
 #include "8255.h"
-// #include "8253.h"
+/* #include "8253.h" */
 
 #define PORT1A 0
 #define PORT2A 4
@@ -64,16 +64,16 @@ struct adl_pci7296_private {
 
 #define devpriv ((struct adl_pci7296_private *)dev->private)
 
-static int adl_pci7296_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int adl_pci7296_detach(struct comedi_device * dev);
+static int adl_pci7296_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int adl_pci7296_detach(struct comedi_device *dev);
 static struct comedi_driver driver_adl_pci7296 = {
-      driver_name:"adl_pci7296",
-      module:THIS_MODULE,
-      attach:adl_pci7296_attach,
-      detach:adl_pci7296_detach,
+	.driver_name = "adl_pci7296",
+	.module = THIS_MODULE,
+	.attach = adl_pci7296_attach,
+	.detach = adl_pci7296_detach,
 };
 
-static int adl_pci7296_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int adl_pci7296_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct pci_dev *pcidev;
 	struct comedi_subdevice *s;
@@ -115,7 +115,7 @@ static int adl_pci7296_attach(struct comedi_device * dev, struct comedi_devconfi
 			dev->iobase = pci_resource_start(pcidev, 2);
 			printk("comedi: base addr %4lx\n", dev->iobase);
 
-			// four 8255 digital io subdevices
+			/*  four 8255 digital io subdevices */
 			s = dev->subdevices + 0;
 			subdev_8255_init(dev, s, NULL,
 				(unsigned long)(dev->iobase));
@@ -149,7 +149,7 @@ static int adl_pci7296_attach(struct comedi_device * dev, struct comedi_devconfi
 	return -EIO;
 }
 
-static int adl_pci7296_detach(struct comedi_device * dev)
+static int adl_pci7296_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: pci7432: remove\n", dev->minor);
 
@@ -159,7 +159,7 @@ static int adl_pci7296_detach(struct comedi_device * dev)
 		}
 		pci_dev_put(devpriv->pci_dev);
 	}
-	// detach four 8255 digital io subdevices
+	/*  detach four 8255 digital io subdevices */
 	if (dev->subdevices) {
 		subdev_8255_cleanup(dev, dev->subdevices + 0);
 		subdev_8255_cleanup(dev, dev->subdevices + 1);
diff --git a/drivers/staging/comedi/drivers/adl_pci7432.c b/drivers/staging/comedi/drivers/adl_pci7432.c
index a8f1715608d..78becbdd17a 100644
--- a/drivers/staging/comedi/drivers/adl_pci7432.c
+++ b/drivers/staging/comedi/drivers/adl_pci7432.c
@@ -58,26 +58,26 @@ struct adl_pci7432_private {
 
 #define devpriv ((struct adl_pci7432_private *)dev->private)
 
-static int adl_pci7432_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int adl_pci7432_detach(struct comedi_device * dev);
+static int adl_pci7432_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int adl_pci7432_detach(struct comedi_device *dev);
 static struct comedi_driver driver_adl_pci7432 = {
-      driver_name:"adl_pci7432",
-      module:THIS_MODULE,
-      attach:adl_pci7432_attach,
-      detach:adl_pci7432_detach,
+	.driver_name = "adl_pci7432",
+	.module = THIS_MODULE,
+	.attach = adl_pci7432_attach,
+	.detach = adl_pci7432_detach,
 };
 
 /* Digital IO */
 
-static int adl_pci7432_di_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int adl_pci7432_di_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
-static int adl_pci7432_do_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int adl_pci7432_do_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
 /*            */
 
-static int adl_pci7432_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int adl_pci7432_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct pci_dev *pcidev;
 	struct comedi_subdevice *s;
@@ -150,7 +150,7 @@ static int adl_pci7432_attach(struct comedi_device * dev, struct comedi_devconfi
 	return -EIO;
 }
 
-static int adl_pci7432_detach(struct comedi_device * dev)
+static int adl_pci7432_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: pci7432: remove\n", dev->minor);
 
@@ -164,8 +164,8 @@ static int adl_pci7432_detach(struct comedi_device * dev)
 	return 0;
 }
 
-static int adl_pci7432_do_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int adl_pci7432_do_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	printk("comedi: pci7432_do_insn_bits called\n");
 	printk("comedi: data0: %8x data1: %8x\n", data[0], data[1]);
@@ -184,8 +184,8 @@ static int adl_pci7432_do_insn_bits(struct comedi_device * dev, struct comedi_su
 	return 2;
 }
 
-static int adl_pci7432_di_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int adl_pci7432_di_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	printk("comedi: pci7432_di_insn_bits called\n");
 	printk("comedi: data0: %8x data1: %8x\n", data[0], data[1]);
diff --git a/drivers/staging/comedi/drivers/adl_pci8164.c b/drivers/staging/comedi/drivers/adl_pci8164.c
index adf90be7998..2d7d68af6b1 100644
--- a/drivers/staging/comedi/drivers/adl_pci8164.c
+++ b/drivers/staging/comedi/drivers/adl_pci8164.c
@@ -70,40 +70,40 @@ struct adl_pci8164_private {
 
 #define devpriv ((struct adl_pci8164_private *)dev->private)
 
-static int adl_pci8164_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int adl_pci8164_detach(struct comedi_device * dev);
+static int adl_pci8164_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int adl_pci8164_detach(struct comedi_device *dev);
 static struct comedi_driver driver_adl_pci8164 = {
-      driver_name:"adl_pci8164",
-      module:THIS_MODULE,
-      attach:adl_pci8164_attach,
-      detach:adl_pci8164_detach,
+	.driver_name = "adl_pci8164",
+	.module = THIS_MODULE,
+	.attach = adl_pci8164_attach,
+	.detach = adl_pci8164_detach,
 };
 
-static int adl_pci8164_insn_read_msts(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int adl_pci8164_insn_read_msts(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
-static int adl_pci8164_insn_read_ssts(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int adl_pci8164_insn_read_ssts(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
-static int adl_pci8164_insn_read_buf0(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int adl_pci8164_insn_read_buf0(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
-static int adl_pci8164_insn_read_buf1(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int adl_pci8164_insn_read_buf1(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
-static int adl_pci8164_insn_write_cmd(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int adl_pci8164_insn_write_cmd(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
-static int adl_pci8164_insn_write_otp(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int adl_pci8164_insn_write_otp(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
-static int adl_pci8164_insn_write_buf0(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data);
+static int adl_pci8164_insn_write_buf0(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data);
 
-static int adl_pci8164_insn_write_buf1(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data);
+static int adl_pci8164_insn_write_buf1(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data);
 
-static int adl_pci8164_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int adl_pci8164_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct pci_dev *pcidev;
 	struct comedi_subdevice *s;
@@ -149,7 +149,7 @@ static int adl_pci8164_attach(struct comedi_device * dev, struct comedi_devconfi
 			s->n_chan = 4;
 			s->maxdata = 0xffff;
 			s->len_chanlist = 4;
-			//s->range_table = &range_axis;
+			/* s->range_table = &range_axis; */
 			s->insn_read = adl_pci8164_insn_read_msts;
 			s->insn_write = adl_pci8164_insn_write_cmd;
 
@@ -159,7 +159,7 @@ static int adl_pci8164_attach(struct comedi_device * dev, struct comedi_devconfi
 			s->n_chan = 4;
 			s->maxdata = 0xffff;
 			s->len_chanlist = 4;
-			//s->range_table = &range_axis;
+			/* s->range_table = &range_axis; */
 			s->insn_read = adl_pci8164_insn_read_ssts;
 			s->insn_write = adl_pci8164_insn_write_otp;
 
@@ -169,7 +169,7 @@ static int adl_pci8164_attach(struct comedi_device * dev, struct comedi_devconfi
 			s->n_chan = 4;
 			s->maxdata = 0xffff;
 			s->len_chanlist = 4;
-			//s->range_table = &range_axis;
+			/* s->range_table = &range_axis; */
 			s->insn_read = adl_pci8164_insn_read_buf0;
 			s->insn_write = adl_pci8164_insn_write_buf0;
 
@@ -179,7 +179,7 @@ static int adl_pci8164_attach(struct comedi_device * dev, struct comedi_devconfi
 			s->n_chan = 4;
 			s->maxdata = 0xffff;
 			s->len_chanlist = 4;
-			//s->range_table = &range_axis;
+			/* s->range_table = &range_axis; */
 			s->insn_read = adl_pci8164_insn_read_buf1;
 			s->insn_write = adl_pci8164_insn_write_buf1;
 
@@ -194,7 +194,7 @@ static int adl_pci8164_attach(struct comedi_device * dev, struct comedi_devconfi
 	return -EIO;
 }
 
-static int adl_pci8164_detach(struct comedi_device * dev)
+static int adl_pci8164_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: pci8164: remove\n", dev->minor);
 
@@ -208,8 +208,16 @@ static int adl_pci8164_detach(struct comedi_device * dev)
 	return 0;
 }
 
-static int adl_pci8164_insn_read_msts(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+/*
+ all the read commands are the same except for the addition a constant
+ * const to the data for inw()
+ */
+static void adl_pci8164_insn_read(struct comedi_device *dev,
+				  struct comedi_subdevice *s,
+				  struct comedi_insn *insn,
+				  unsigned int *data,
+				  char *action,
+				  unsigned short offset)
 {
 	int axis, axis_reg;
 	char *axisname;
@@ -238,127 +246,51 @@ static int adl_pci8164_insn_read_msts(struct comedi_device * dev, struct comedi_
 		axisname = "X";
 	}
 
-	data[0] = inw(dev->iobase + axis_reg + PCI8164_MSTS);
-	printk("comedi: pci8164 MSTS read -> %04X:%04X on axis %s\n", data[0],
+	data[0] = inw(dev->iobase + axis_reg + offset);
+	printk("comedi: pci8164 %s read -> %04X:%04X on axis %s\n", action, data[0],
 		data[1], axisname);
+}
 
+static int adl_pci8164_insn_read_msts(struct comedi_device *dev,
+				      struct comedi_subdevice *s,
+				      struct comedi_insn *insn,
+				      unsigned int *data)
+{
+	adl_pci8164_insn_read(dev, s, insn, data, "MSTS", PCI8164_MSTS);
 	return 2;
 }
 
-static int adl_pci8164_insn_read_ssts(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int adl_pci8164_insn_read_ssts(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	int axis, axis_reg;
-	char *axisname;
-
-	axis = CR_CHAN(insn->chanspec);
-
-	switch (axis) {
-	case 0:
-		axis_reg = PCI8164_AXIS_X;
-		axisname = "X";
-		break;
-	case 1:
-		axis_reg = PCI8164_AXIS_Y;
-		axisname = "Y";
-		break;
-	case 2:
-		axis_reg = PCI8164_AXIS_Z;
-		axisname = "Z";
-		break;
-	case 3:
-		axis_reg = PCI8164_AXIS_U;
-		axisname = "U";
-		break;
-	default:
-		axis_reg = PCI8164_AXIS_X;
-		axisname = "X";
-	}
-
-	data[0] = inw(dev->iobase + axis_reg + PCI8164_SSTS);
-	printk("comedi: pci8164 SSTS read -> %04X:%04X on axis %s\n", data[0],
-		data[1], axisname);
-
+	adl_pci8164_insn_read(dev, s, insn, data, "SSTS", PCI8164_SSTS);
 	return 2;
 }
 
-static int adl_pci8164_insn_read_buf0(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int adl_pci8164_insn_read_buf0(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	int axis, axis_reg;
-	char *axisname;
-
-	axis = CR_CHAN(insn->chanspec);
-
-	switch (axis) {
-	case 0:
-		axis_reg = PCI8164_AXIS_X;
-		axisname = "X";
-		break;
-	case 1:
-		axis_reg = PCI8164_AXIS_Y;
-		axisname = "Y";
-		break;
-	case 2:
-		axis_reg = PCI8164_AXIS_Z;
-		axisname = "Z";
-		break;
-	case 3:
-		axis_reg = PCI8164_AXIS_U;
-		axisname = "U";
-		break;
-	default:
-		axis_reg = PCI8164_AXIS_X;
-		axisname = "X";
-	}
-
-	data[0] = inw(dev->iobase + axis_reg + PCI8164_BUF0);
-	printk("comedi: pci8164 BUF0 read -> %04X:%04X on axis %s\n", data[0],
-		data[1], axisname);
-
+	adl_pci8164_insn_read(dev, s, insn, data, "BUF0", PCI8164_BUF0);
 	return 2;
 }
 
-static int adl_pci8164_insn_read_buf1(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int adl_pci8164_insn_read_buf1(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	int axis, axis_reg;
-
-	char *axisname;
-
-	axis = CR_CHAN(insn->chanspec);
-
-	switch (axis) {
-	case 0:
-		axis_reg = PCI8164_AXIS_X;
-		axisname = "X";
-		break;
-	case 1:
-		axis_reg = PCI8164_AXIS_Y;
-		axisname = "Y";
-		break;
-	case 2:
-		axis_reg = PCI8164_AXIS_Z;
-		axisname = "Z";
-		break;
-	case 3:
-		axis_reg = PCI8164_AXIS_U;
-		axisname = "U";
-		break;
-	default:
-		axis_reg = PCI8164_AXIS_X;
-		axisname = "X";
-	}
-
-	data[0] = inw(dev->iobase + axis_reg + PCI8164_BUF1);
-	printk("comedi: pci8164 BUF1 read -> %04X:%04X on axis %s\n", data[0],
-		data[1], axisname);
-
+	adl_pci8164_insn_read(dev, s, insn, data, "BUF1", PCI8164_BUF1);
 	return 2;
 }
 
-static int adl_pci8164_insn_write_cmd(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+/*
+ all the write commands are the same except for the addition a constant
+ * const to the data for outw()
+ */
+static void adl_pci8164_insn_out(struct comedi_device *dev,
+					struct comedi_subdevice *s,
+					struct comedi_insn *insn,
+					unsigned int *data,
+					char *action,
+					unsigned short offset)
 {
 	unsigned int axis, axis_reg;
 
@@ -388,124 +320,39 @@ static int adl_pci8164_insn_write_cmd(struct comedi_device * dev, struct comedi_
 		axisname = "X";
 	}
 
-	outw(data[0], dev->iobase + axis_reg + PCI8164_CMD);
-	printk("comedi: pci8164 CMD write -> %04X:%04X on axis %s\n", data[0],
-		data[1], axisname);
-
-	return 2;
-}
-
-static int adl_pci8164_insn_write_otp(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
-{
-	int axis, axis_reg;
-
-	char *axisname;
+	outw(data[0], dev->iobase + axis_reg + offset);
 
-	axis = CR_CHAN(insn->chanspec);
+	printk("comedi: pci8164 %s write -> %04X:%04X on axis %s\n", action,
+	       data[0], data[1], axisname);
 
-	switch (axis) {
-	case 0:
-		axis_reg = PCI8164_AXIS_X;
-		axisname = "X";
-		break;
-	case 1:
-		axis_reg = PCI8164_AXIS_Y;
-		axisname = "Y";
-		break;
-	case 2:
-		axis_reg = PCI8164_AXIS_Z;
-		axisname = "Z";
-		break;
-	case 3:
-		axis_reg = PCI8164_AXIS_U;
-		axisname = "U";
-		break;
-	default:
-		axis_reg = PCI8164_AXIS_X;
-		axisname = "X";
-	}
+}
 
-	outw(data[0], dev->iobase + axis_reg + PCI8164_OTP);
-	printk("comedi: pci8164 OTP write -> %04X:%04X on axis %s\n", data[0],
-		data[1], axisname);
 
+static int adl_pci8164_insn_write_cmd(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
+{
+	adl_pci8164_insn_out(dev, s, insn, data, "CMD", PCI8164_CMD);
 	return 2;
 }
 
-static int adl_pci8164_insn_write_buf0(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+static int adl_pci8164_insn_write_otp(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	int axis, axis_reg;
-
-	char *axisname;
-
-	axis = CR_CHAN(insn->chanspec);
-
-	switch (axis) {
-	case 0:
-		axis_reg = PCI8164_AXIS_X;
-		axisname = "X";
-		break;
-	case 1:
-		axis_reg = PCI8164_AXIS_Y;
-		axisname = "Y";
-		break;
-	case 2:
-		axis_reg = PCI8164_AXIS_Z;
-		axisname = "Z";
-		break;
-	case 3:
-		axis_reg = PCI8164_AXIS_U;
-		axisname = "U";
-		break;
-	default:
-		axis_reg = PCI8164_AXIS_X;
-		axisname = "X";
-	}
-
-	outw(data[0], dev->iobase + axis_reg + PCI8164_BUF0);
-	printk("comedi: pci8164 BUF0 write -> %04X:%04X on axis %s\n", data[0],
-		data[1], axisname);
-
+	adl_pci8164_insn_out(dev, s, insn, data, "OTP", PCI8164_OTP);
 	return 2;
 }
 
-static int adl_pci8164_insn_write_buf1(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+static int adl_pci8164_insn_write_buf0(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	int axis, axis_reg;
-
-	char *axisname;
-
-	axis = CR_CHAN(insn->chanspec);
-
-	switch (axis) {
-	case 0:
-		axis_reg = PCI8164_AXIS_X;
-		axisname = "X";
-		break;
-	case 1:
-		axis_reg = PCI8164_AXIS_Y;
-		axisname = "Y";
-		break;
-	case 2:
-		axis_reg = PCI8164_AXIS_Z;
-		axisname = "Z";
-		break;
-	case 3:
-		axis_reg = PCI8164_AXIS_U;
-		axisname = "U";
-		break;
-	default:
-		axis_reg = PCI8164_AXIS_X;
-		axisname = "X";
-	}
-
-	outw(data[0], dev->iobase + axis_reg + PCI8164_BUF1);
-	printk("comedi: pci8164 BUF1 write -> %04X:%04X on axis %s\n", data[0],
-		data[1], axisname);
+	adl_pci8164_insn_out(dev, s, insn, data, "BUF0", PCI8164_BUF0);
+	return 2;
+}
 
+static int adl_pci8164_insn_write_buf1(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
+{
+	adl_pci8164_insn_out(dev, s, insn, data, "BUF1", PCI8164_BUF1);
 	return 2;
 }
 
diff --git a/drivers/staging/comedi/drivers/adl_pci9111.c b/drivers/staging/comedi/drivers/adl_pci9111.c
index b4a61c560c5..0ac722e6f37 100644
--- a/drivers/staging/comedi/drivers/adl_pci9111.c
+++ b/drivers/staging/comedi/drivers/adl_pci9111.c
@@ -77,6 +77,7 @@ TODO:
 #include "../comedidev.h"
 
 #include <linux/delay.h>
+#include <linux/interrupt.h>
 
 #include "8253.h"
 #include "comedi_pci.h"
@@ -186,24 +187,24 @@ TODO:
   (inb(PCI9111_IO_BASE+PCI9111_REGISTER_AD_MODE_INTERRUPT_READBACK)&0x0F)
 
 #define pci9111_trigger_and_autoscan_set(flags) \
-  outb(flags,PCI9111_IO_BASE+PCI9111_REGISTER_TRIGGER_MODE_CONTROL)
+  outb(flags, PCI9111_IO_BASE+PCI9111_REGISTER_TRIGGER_MODE_CONTROL)
 
 #define pci9111_interrupt_and_fifo_get() \
   ((inb(PCI9111_IO_BASE+PCI9111_REGISTER_AD_MODE_INTERRUPT_READBACK) >> 4) &0x03)
 
 #define pci9111_interrupt_and_fifo_set(flags) \
-  outb(flags,PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CONTROL)
+  outb(flags, PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CONTROL)
 
 #define pci9111_interrupt_clear() \
-  outb(0,PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CLEAR)
+  outb(0, PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CLEAR)
 
 #define pci9111_software_trigger() \
-  outb(0,PCI9111_IO_BASE+PCI9111_REGISTER_SOFTWARE_TRIGGER)
+  outb(0, PCI9111_IO_BASE+PCI9111_REGISTER_SOFTWARE_TRIGGER)
 
 #define pci9111_fifo_reset() \
-  outb(PCI9111_FFEN_SET_FIFO_ENABLE,PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CONTROL); \
-  outb(PCI9111_FFEN_SET_FIFO_DISABLE,PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CONTROL); \
-  outb(PCI9111_FFEN_SET_FIFO_ENABLE,PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CONTROL)
+  outb(PCI9111_FFEN_SET_FIFO_ENABLE, PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CONTROL); \
+  outb(PCI9111_FFEN_SET_FIFO_DISABLE, PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CONTROL); \
+  outb(PCI9111_FFEN_SET_FIFO_ENABLE, PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CONTROL)
 
 #define pci9111_is_fifo_full() \
   ((inb(PCI9111_IO_BASE+PCI9111_REGISTER_RANGE_STATUS_READBACK)& \
@@ -218,13 +219,13 @@ TODO:
     PCI9111_FIFO_EMPTY_MASK)==0)
 
 #define pci9111_ai_channel_set(channel) \
-  outb((channel)&PCI9111_CHANNEL_MASK,PCI9111_IO_BASE+PCI9111_REGISTER_AD_CHANNEL_CONTROL)
+  outb((channel)&PCI9111_CHANNEL_MASK, PCI9111_IO_BASE+PCI9111_REGISTER_AD_CHANNEL_CONTROL)
 
 #define pci9111_ai_channel_get() \
   inb(PCI9111_IO_BASE+PCI9111_REGISTER_AD_CHANNEL_READBACK)&PCI9111_CHANNEL_MASK
 
 #define pci9111_ai_range_set(range) \
-  outb((range)&PCI9111_RANGE_MASK,PCI9111_IO_BASE+PCI9111_REGISTER_INPUT_SIGNAL_RANGE)
+  outb((range)&PCI9111_RANGE_MASK, PCI9111_IO_BASE+PCI9111_REGISTER_INPUT_SIGNAL_RANGE)
 
 #define pci9111_ai_range_get() \
   inb(PCI9111_IO_BASE+PCI9111_REGISTER_RANGE_STATUS_READBACK)&PCI9111_RANGE_MASK
@@ -238,34 +239,34 @@ TODO:
   ^ PCI9111_HR_AI_RESOLUTION_2_CMP_BIT
 
 #define pci9111_ao_set_data(data) \
-  outw(data&PCI9111_AO_RESOLUTION_MASK,PCI9111_IO_BASE+PCI9111_REGISTER_DA_OUTPUT)
+  outw(data&PCI9111_AO_RESOLUTION_MASK, PCI9111_IO_BASE+PCI9111_REGISTER_DA_OUTPUT)
 
 #define pci9111_di_get_bits() \
   inw(PCI9111_IO_BASE+PCI9111_REGISTER_DIGITAL_IO)
 
 #define pci9111_do_set_bits(bits) \
-  outw(bits,PCI9111_IO_BASE+PCI9111_REGISTER_DIGITAL_IO)
+  outw(bits, PCI9111_IO_BASE+PCI9111_REGISTER_DIGITAL_IO)
 
 #define pci9111_8254_control_set(flags) \
-  outb(flags,PCI9111_IO_BASE+PCI9111_REGISTER_8254_CONTROL)
+  outb(flags, PCI9111_IO_BASE+PCI9111_REGISTER_8254_CONTROL)
 
 #define pci9111_8254_counter_0_set(data) \
   outb(data & 0xFF, PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_0); \
-  outb( (data >> 8) & 0xFF, PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_0)
+  outb((data >> 8) & 0xFF, PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_0)
 
 #define pci9111_8254_counter_1_set(data) \
   outb(data & 0xFF, PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_1); \
-  outb( (data >> 8) & 0xFF, PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_1)
+  outb((data >> 8) & 0xFF, PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_1)
 
 #define pci9111_8254_counter_2_set(data) \
   outb(data & 0xFF, PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_2); \
-  outb( (data >> 8) & 0xFF, PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_2)
+  outb((data >> 8) & 0xFF, PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_2)
 
 /*  Function prototypes */
 
-static int pci9111_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int pci9111_detach(struct comedi_device * dev);
-static void pci9111_ai_munge(struct comedi_device * dev, struct comedi_subdevice * s,
+static int pci9111_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int pci9111_detach(struct comedi_device *dev);
+static void pci9111_ai_munge(struct comedi_device *dev, struct comedi_subdevice *s,
 	void *data, unsigned int num_bytes, unsigned int start_chan_index);
 
 static const struct comedi_lrange pci9111_hr_ai_range = {
@@ -308,27 +309,27 @@ struct pci9111_board {
 
 static const struct pci9111_board pci9111_boards[] = {
 	{
-	      name:	"pci9111_hr",
-	      device_id:PCI9111_HR_DEVICE_ID,
-	      ai_channel_nbr:PCI9111_AI_CHANNEL_NBR,
-	      ao_channel_nbr:PCI9111_AO_CHANNEL_NBR,
-	      ai_resolution:PCI9111_HR_AI_RESOLUTION,
-	      ai_resolution_mask:PCI9111_HR_AI_RESOLUTION_MASK,
-	      ao_resolution:PCI9111_AO_RESOLUTION,
-	      ao_resolution_mask:PCI9111_AO_RESOLUTION_MASK,
-	      ai_range_list:&pci9111_hr_ai_range,
-	      ao_range_list:&range_bipolar10,
-      ai_acquisition_period_min_ns:PCI9111_AI_ACQUISITION_PERIOD_MIN_NS}
+	.name = "pci9111_hr",
+	.device_id = PCI9111_HR_DEVICE_ID,
+	.ai_channel_nbr = PCI9111_AI_CHANNEL_NBR,
+	.ao_channel_nbr = PCI9111_AO_CHANNEL_NBR,
+	.ai_resolution = PCI9111_HR_AI_RESOLUTION,
+	.ai_resolution_mask = PCI9111_HR_AI_RESOLUTION_MASK,
+	.ao_resolution = PCI9111_AO_RESOLUTION,
+	.ao_resolution_mask = PCI9111_AO_RESOLUTION_MASK,
+	.ai_range_list = &pci9111_hr_ai_range,
+	.ao_range_list = &range_bipolar10,
+	.ai_acquisition_period_min_ns = PCI9111_AI_ACQUISITION_PERIOD_MIN_NS}
 };
 
 #define pci9111_board_nbr \
   (sizeof(pci9111_boards)/sizeof(struct pci9111_board))
 
 static struct comedi_driver pci9111_driver = {
-      driver_name:PCI9111_DRIVER_NAME,
-      module:THIS_MODULE,
-      attach:pci9111_attach,
-      detach:pci9111_detach,
+	.driver_name = PCI9111_DRIVER_NAME,
+	.module = THIS_MODULE,
+	.attach = pci9111_attach,
+	.detach = pci9111_detach,
 };
 
 COMEDI_PCI_INITCLEANUP(pci9111_driver, pci9111_pci_table);
@@ -405,7 +406,7 @@ static void plx9050_interrupt_control(unsigned long io_base,
 
 /*  8254 timer */
 
-static void pci9111_timer_set(struct comedi_device * dev)
+static void pci9111_timer_set(struct comedi_device *dev)
 {
 	pci9111_8254_control_set(PCI9111_8254_COUNTER_0 |
 		PCI9111_8254_READ_LOAD_LSB_MSB |
@@ -419,7 +420,7 @@ static void pci9111_timer_set(struct comedi_device * dev)
 		PCI9111_8254_READ_LOAD_LSB_MSB |
 		PCI9111_8254_MODE_2 | PCI9111_8254_BINARY_COUNTER);
 
-	comedi_udelay(1);
+	udelay(1);
 
 	pci9111_8254_counter_2_set(dev_private->timer_divisor_2);
 	pci9111_8254_counter_1_set(dev_private->timer_divisor_1);
@@ -431,7 +432,7 @@ enum pci9111_trigger_sources {
 	external
 };
 
-static void pci9111_trigger_source_set(struct comedi_device * dev,
+static void pci9111_trigger_source_set(struct comedi_device *dev,
 	enum pci9111_trigger_sources source)
 {
 	int flags;
@@ -455,7 +456,7 @@ static void pci9111_trigger_source_set(struct comedi_device * dev,
 	pci9111_trigger_and_autoscan_set(flags);
 }
 
-static void pci9111_pretrigger_set(struct comedi_device * dev, bool pretrigger)
+static void pci9111_pretrigger_set(struct comedi_device *dev, bool pretrigger)
 {
 	int flags;
 
@@ -467,7 +468,7 @@ static void pci9111_pretrigger_set(struct comedi_device * dev, bool pretrigger)
 	pci9111_trigger_and_autoscan_set(flags);
 }
 
-static void pci9111_autoscan_set(struct comedi_device * dev, bool autoscan)
+static void pci9111_autoscan_set(struct comedi_device *dev, bool autoscan)
 {
 	int flags;
 
@@ -489,7 +490,7 @@ enum pci9111_ISC1_sources {
 	irq_on_external_trigger
 };
 
-static void pci9111_interrupt_source_set(struct comedi_device * dev,
+static void pci9111_interrupt_source_set(struct comedi_device *dev,
 	enum pci9111_ISC0_sources irq_0_source, enum pci9111_ISC1_sources irq_1_source)
 {
 	int flags;
@@ -513,7 +514,7 @@ static void pci9111_interrupt_source_set(struct comedi_device * dev,
 
 #undef AI_DO_CMD_DEBUG
 
-static int pci9111_ai_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pci9111_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	/*  Disable interrupts */
 
@@ -535,14 +536,14 @@ static int pci9111_ai_cancel(struct comedi_device * dev, struct comedi_subdevice
 
 /*  Test analog input command */
 
-#define pci9111_check_trigger_src(src,flags) \
+#define pci9111_check_trigger_src(src, flags) \
   tmp = src; \
   src &= flags; \
   if (!src || tmp != src) error++
 
 static int
-pci9111_ai_do_cmd_test(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_cmd * cmd)
+pci9111_ai_do_cmd_test(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_cmd *cmd)
 {
 	int tmp;
 	int error = 0;
@@ -740,7 +741,7 @@ pci9111_ai_do_cmd_test(struct comedi_device * dev,
 
 /*  Analog input command */
 
-static int pci9111_ai_do_cmd(struct comedi_device * dev, struct comedi_subdevice * subdevice)
+static int pci9111_ai_do_cmd(struct comedi_device *dev, struct comedi_subdevice *subdevice)
 {
 	struct comedi_cmd *async_cmd = &subdevice->async->cmd;
 
@@ -858,7 +859,7 @@ static int pci9111_ai_do_cmd(struct comedi_device * dev, struct comedi_subdevice
 	return 0;
 }
 
-static void pci9111_ai_munge(struct comedi_device * dev, struct comedi_subdevice * s,
+static void pci9111_ai_munge(struct comedi_device *dev, struct comedi_subdevice *s,
 	void *data, unsigned int num_bytes, unsigned int start_chan_index)
 {
 	unsigned int i, num_samples = num_bytes / sizeof(short);
@@ -884,7 +885,7 @@ static void pci9111_ai_munge(struct comedi_device * dev, struct comedi_subdevice
 
 #undef INTERRUPT_DEBUG
 
-static irqreturn_t pci9111_interrupt(int irq, void *p_device PT_REGS_ARG)
+static irqreturn_t pci9111_interrupt(int irq, void *p_device)
 {
 	struct comedi_device *dev = p_device;
 	struct comedi_subdevice *subdevice = dev->read_subdev;
@@ -900,7 +901,7 @@ static irqreturn_t pci9111_interrupt(int irq, void *p_device PT_REGS_ARG)
 
 	async = subdevice->async;
 
-	comedi_spin_lock_irqsave(&dev->spinlock, irq_flags);
+	spin_lock_irqsave(&dev->spinlock, irq_flags);
 
 	/*  Check if we are source of interrupt */
 	intcsr = inb(dev_private->lcr_io_base +
@@ -918,7 +919,7 @@ static irqreturn_t pci9111_interrupt(int irq, void *p_device PT_REGS_ARG)
 						PLX9050_LINTI2_STATUS))))) {
 		/*  Not the source of the interrupt. */
 		/*  (N.B. not using PLX9050_SOFTWARE_INTERRUPT) */
-		comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+		spin_unlock_irqrestore(&dev->spinlock, irq_flags);
 		return IRQ_NONE;
 	}
 
@@ -927,7 +928,7 @@ static irqreturn_t pci9111_interrupt(int irq, void *p_device PT_REGS_ARG)
 		/*  Interrupt comes from fifo_half-full signal */
 
 		if (pci9111_is_fifo_full()) {
-			comedi_spin_unlock_irqrestore(&dev->spinlock,
+			spin_unlock_irqrestore(&dev->spinlock,
 				irq_flags);
 			comedi_error(dev, PCI9111_DRIVER_NAME " fifo overflow");
 			pci9111_interrupt_clear();
@@ -1027,7 +1028,7 @@ static irqreturn_t pci9111_interrupt(int irq, void *p_device PT_REGS_ARG)
 
 	pci9111_interrupt_clear();
 
-	comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+	spin_unlock_irqrestore(&dev->spinlock, irq_flags);
 
 	comedi_event(dev, subdevice);
 
@@ -1042,8 +1043,8 @@ static irqreturn_t pci9111_interrupt(int irq, void *p_device PT_REGS_ARG)
 
 #undef AI_INSN_DEBUG
 
-static int pci9111_ai_insn_read(struct comedi_device * dev,
-	struct comedi_subdevice * subdevice, struct comedi_insn * insn, unsigned int * data)
+static int pci9111_ai_insn_read(struct comedi_device *dev,
+	struct comedi_subdevice *subdevice, struct comedi_insn *insn, unsigned int *data)
 {
 	int resolution =
 		((struct pci9111_board *) dev->board_ptr)->ai_resolution;
@@ -1100,8 +1101,8 @@ static int pci9111_ai_insn_read(struct comedi_device * dev,
 /*  Analog instant output */
 
 static int
-pci9111_ao_insn_write(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+pci9111_ao_insn_write(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 
@@ -1115,8 +1116,8 @@ pci9111_ao_insn_write(struct comedi_device * dev,
 
 /*  Analog output readback */
 
-static int pci9111_ao_insn_read(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+static int pci9111_ao_insn_read(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 
@@ -1133,8 +1134,8 @@ static int pci9111_ao_insn_read(struct comedi_device * dev,
 
 /*  Digital inputs */
 
-static int pci9111_di_insn_bits(struct comedi_device * dev,
-	struct comedi_subdevice * subdevice, struct comedi_insn * insn, unsigned int * data)
+static int pci9111_di_insn_bits(struct comedi_device *dev,
+	struct comedi_subdevice *subdevice, struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int bits;
 
@@ -1146,8 +1147,8 @@ static int pci9111_di_insn_bits(struct comedi_device * dev,
 
 /*  Digital outputs */
 
-static int pci9111_do_insn_bits(struct comedi_device * dev,
-	struct comedi_subdevice * subdevice, struct comedi_insn * insn, unsigned int * data)
+static int pci9111_do_insn_bits(struct comedi_device *dev,
+	struct comedi_subdevice *subdevice, struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int bits;
 
@@ -1175,7 +1176,7 @@ static int pci9111_do_insn_bits(struct comedi_device * dev,
 
 /*  Reset device */
 
-static int pci9111_reset(struct comedi_device * dev)
+static int pci9111_reset(struct comedi_device *dev)
 {
 	/*  Set trigger source to software */
 
@@ -1200,7 +1201,7 @@ static int pci9111_reset(struct comedi_device * dev)
 /*       - Register PCI device */
 /*       - Declare device driver capability */
 
-static int pci9111_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int pci9111_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *subdevice;
 	unsigned long io_base, io_range, lcr_io_base, lcr_io_range;
@@ -1297,8 +1298,7 @@ static int pci9111_attach(struct comedi_device * dev, struct comedi_devconfig *
 
 	dev->irq = 0;
 	if (pci_device->irq > 0) {
-		if (comedi_request_irq(pci_device->irq,
-				pci9111_interrupt,
+		if (request_irq(pci_device->irq, pci9111_interrupt,
 				IRQF_SHARED, PCI9111_DRIVER_NAME, dev) != 0) {
 			printk("comedi%d: unable to allocate irq  %u\n",
 				dev->minor, pci_device->irq);
@@ -1309,7 +1309,8 @@ static int pci9111_attach(struct comedi_device * dev, struct comedi_devconfig *
 
 	/*  TODO: Add external multiplexer setup (according to option[2]). */
 
-	if ((error = alloc_subdevices(dev, 4)) < 0)
+	error = alloc_subdevices(dev, 4);
+	if (error < 0)
 		return error;
 
 	subdevice = dev->subdevices + 0;
@@ -1365,7 +1366,7 @@ static int pci9111_attach(struct comedi_device * dev, struct comedi_devconfig *
 
 /*  Detach */
 
-static int pci9111_detach(struct comedi_device * dev)
+static int pci9111_detach(struct comedi_device *dev)
 {
 	/*  Reset device */
 
@@ -1377,7 +1378,7 @@ static int pci9111_detach(struct comedi_device * dev)
 	/*  Release previously allocated irq */
 
 	if (dev->irq != 0) {
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 	}
 
 	if (dev_private != 0 && dev_private->pci_device != 0) {
diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c b/drivers/staging/comedi/drivers/adl_pci9118.c
index 278cf30cc4a..65f522be912 100644
--- a/drivers/staging/comedi/drivers/adl_pci9118.c
+++ b/drivers/staging/comedi/drivers/adl_pci9118.c
@@ -66,6 +66,7 @@ Configuration options:
 #include "../pci_ids.h"
 
 #include <linux/delay.h>
+#include <linux/interrupt.h>
 
 #include "amcc_s5933.h"
 #include "8253.h"
@@ -79,7 +80,7 @@ Configuration options:
 
 #undef DPRINTK
 #ifdef PCI9118_EXTDEBUG
-#define DPRINTK(fmt, args...) rt_printk(fmt, ## args)
+#define DPRINTK(fmt, args...) printk(fmt, ## args)
 #else
 #define DPRINTK(fmt, args...)
 #endif
@@ -107,7 +108,7 @@ Configuration options:
 #define PCI9118_INTSRC	0x38	/* R:   interrupt reason register */
 #define PCI9118_INTCTRL	0x38	/* W:   interrupt control register */
 
-// bits from A/D control register (PCI9118_ADCNTRL)
+/* bits from A/D control register (PCI9118_ADCNTRL) */
 #define AdControl_UniP	0x80	/* 1=bipolar, 0=unipolar */
 #define AdControl_Diff	0x40	/* 1=differential, 0= single end inputs */
 #define AdControl_SoftG	0x20	/* 1=8254 counter works, 0=counter stops */
@@ -117,7 +118,7 @@ Configuration options:
 #define AdControl_Int	0x02	/* 1=enable INT, 0=disable */
 #define AdControl_Dma	0x01	/* 1=enable DMA, 0=disable */
 
-// bits from A/D function register (PCI9118_ADFUNC)
+/* bits from A/D function register (PCI9118_ADFUNC) */
 #define AdFunction_PDTrg	0x80	/* 1=positive, 0=negative digital trigger (only positive is correct) */
 #define AdFunction_PETrg	0x40	/* 1=positive, 0=negative external trigger (only positive is correct) */
 #define AdFunction_BSSH		0x20	/* 1=with sample&hold, 0=without */
@@ -127,7 +128,7 @@ Configuration options:
 #define AdFunction_AM		0x02	/* 1=about trigger mode, 0=not about trigger */
 #define AdFunction_Start	0x01	/* 1=trigger start, 0=trigger stop */
 
-// bits from A/D status register (PCI9118_ADSTAT)
+/* bits from A/D status register (PCI9118_ADSTAT) */
 #define AdStatus_nFull	0x100	/* 0=FIFO full (fatal), 1=not full */
 #define AdStatus_nHfull	0x080	/* 0=FIFO half full, 1=FIFO not half full */
 #define AdStatus_nEpty	0x040	/* 0=FIFO empty, 1=FIFO not empty */
@@ -138,8 +139,8 @@ Configuration options:
 #define AdStatus_ADOR	0x002	/* 1=A/D overrun (fatal) */
 #define AdStatus_ADrdy	0x001	/* 1=A/D already ready, 0=not ready */
 
-// bits for interrupt reason and control (PCI9118_INTSRC, PCI9118_INTCTRL)
-// 1=interrupt occur, enable source,  0=interrupt not occur, disable source
+/* bits for interrupt reason and control (PCI9118_INTSRC, PCI9118_INTCTRL) */
+/* 1=interrupt occur, enable source,  0=interrupt not occur, disable source */
 #define Int_Timer	0x08	/* timer interrupt */
 #define Int_About	0x04	/* about trigger complete */
 #define Int_Hfull	0x02	/* A/D FIFO hlaf full */
@@ -178,27 +179,27 @@ static const struct comedi_lrange range_pci9118hg = { 8, {
 
 #define PCI9118_BIPOLAR_RANGES	4	/* used for test on mixture of BIP/UNI ranges */
 
-static int pci9118_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int pci9118_detach(struct comedi_device * dev);
+static int pci9118_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int pci9118_detach(struct comedi_device *dev);
 
 struct boardtype {
-	const char *name;	// board name
-	int vendor_id;		// PCI vendor a device ID of card
+	const char *name;	/*  board name */
+	int vendor_id;		/*  PCI vendor a device ID of card */
 	int device_id;
-	int iorange_amcc;	// iorange for own S5933 region
-	int iorange_9118;	// pass thru card region size
-	int n_aichan;		// num of A/D chans
-	int n_aichand;		// num of A/D chans in diff mode
-	int mux_aichan;		// num of A/D chans with external multiplexor
-	int n_aichanlist;	// len of chanlist
-	int n_aochan;		// num of D/A chans
-	int ai_maxdata;		// resolution of A/D
-	int ao_maxdata;		// resolution of D/A
-	const struct comedi_lrange *rangelist_ai;	// rangelist for A/D
-	const struct comedi_lrange *rangelist_ao;	// rangelist for D/A
-	unsigned int ai_ns_min;	// max sample speed of card v ns
-	unsigned int ai_pacer_min;	// minimal pacer value (c1*c2 or c1 in burst)
-	int half_fifo_size;	// size of FIFO/2
+	int iorange_amcc;	/*  iorange for own S5933 region */
+	int iorange_9118;	/*  pass thru card region size */
+	int n_aichan;		/*  num of A/D chans */
+	int n_aichand;		/*  num of A/D chans in diff mode */
+	int mux_aichan;		/*  num of A/D chans with external multiplexor */
+	int n_aichanlist;	/*  len of chanlist */
+	int n_aochan;		/*  num of D/A chans */
+	int ai_maxdata;		/*  resolution of A/D */
+	int ao_maxdata;		/*  resolution of D/A */
+	const struct comedi_lrange *rangelist_ai;	/*  rangelist for A/D */
+	const struct comedi_lrange *rangelist_ao;	/*  rangelist for D/A */
+	unsigned int ai_ns_min;	/*  max sample speed of card v ns */
+	unsigned int ai_pacer_min;	/*  minimal pacer value (c1*c2 or c1 in burst) */
+	int half_fifo_size;	/*  size of FIFO/2 */
 
 };
 
@@ -230,75 +231,75 @@ static const struct boardtype boardtypes[] = {
 #define n_boardtypes (sizeof(boardtypes)/sizeof(struct boardtype))
 
 static struct comedi_driver driver_pci9118 = {
-      driver_name:"adl_pci9118",
-      module:THIS_MODULE,
-      attach:pci9118_attach,
-      detach:pci9118_detach,
-      num_names:n_boardtypes,
-      board_name:&boardtypes[0].name,
-      offset:sizeof(struct boardtype),
+	.driver_name = "adl_pci9118",
+	.module = THIS_MODULE,
+	.attach = pci9118_attach,
+	.detach = pci9118_detach,
+	.num_names = n_boardtypes,
+	.board_name = &boardtypes[0].name,
+	.offset = sizeof(struct boardtype),
 };
 
 COMEDI_PCI_INITCLEANUP(driver_pci9118, pci9118_pci_table);
 
 struct pci9118_private {
-	unsigned long iobase_a;	// base+size for AMCC chip
-	unsigned int master;	// master capable
-	struct pci_dev *pcidev;	// ptr to actual pcidev
-	unsigned int usemux;	// we want to use external multiplexor!
+	unsigned long iobase_a;	/*  base+size for AMCC chip */
+	unsigned int master;	/*  master capable */
+	struct pci_dev *pcidev;	/*  ptr to actual pcidev */
+	unsigned int usemux;	/*  we want to use external multiplexor! */
 #ifdef PCI9118_PARANOIDCHECK
-	unsigned short chanlist[PCI9118_CHANLEN + 1];	// list of scaned channel
-	unsigned char chanlistlen;	// number of scanlist
+	unsigned short chanlist[PCI9118_CHANLEN + 1];	/*  list of scaned channel */
+	unsigned char chanlistlen;	/*  number of scanlist */
 #endif
-	unsigned char AdControlReg;	// A/D control register
-	unsigned char IntControlReg;	// Interrupt control register
-	unsigned char AdFunctionReg;	// A/D function register
-	char valid;		// driver is ok
-	char ai_neverending;	// we do unlimited AI
-	unsigned int i8254_osc_base;	// frequence of onboard oscilator
-	unsigned int ai_do;	// what do AI? 0=nothing, 1 to 4 mode
-	unsigned int ai_act_scan;	// how many scans we finished
-	unsigned int ai_buf_ptr;	// data buffer ptr in samples
-	unsigned int ai_n_chan;	// how many channels is measured
-	unsigned int ai_n_scanlen;	// len of actual scanlist
-	unsigned int ai_n_realscanlen;	// what we must transfer for one outgoing scan include front/back adds
-	unsigned int ai_act_dmapos;	// position in actual real stream
-	unsigned int ai_add_front;	// how many channels we must add before scan to satisfy S&H?
-	unsigned int ai_add_back;	// how many channels we must add before scan to satisfy DMA?
-	unsigned int *ai_chanlist;	// actaul chanlist
+	unsigned char AdControlReg;	/*  A/D control register */
+	unsigned char IntControlReg;	/*  Interrupt control register */
+	unsigned char AdFunctionReg;	/*  A/D function register */
+	char valid;		/*  driver is ok */
+	char ai_neverending;	/*  we do unlimited AI */
+	unsigned int i8254_osc_base;	/*  frequence of onboard oscilator */
+	unsigned int ai_do;	/*  what do AI? 0=nothing, 1 to 4 mode */
+	unsigned int ai_act_scan;	/*  how many scans we finished */
+	unsigned int ai_buf_ptr;	/*  data buffer ptr in samples */
+	unsigned int ai_n_chan;	/*  how many channels is measured */
+	unsigned int ai_n_scanlen;	/*  len of actual scanlist */
+	unsigned int ai_n_realscanlen;	/*  what we must transfer for one outgoing scan include front/back adds */
+	unsigned int ai_act_dmapos;	/*  position in actual real stream */
+	unsigned int ai_add_front;	/*  how many channels we must add before scan to satisfy S&H? */
+	unsigned int ai_add_back;	/*  how many channels we must add before scan to satisfy DMA? */
+	unsigned int *ai_chanlist;	/*  actaul chanlist */
 	unsigned int ai_timer1;
 	unsigned int ai_timer2;
 	unsigned int ai_flags;
-	char ai12_startstop;	// measure can start/stop on external trigger
-	unsigned int ai_divisor1, ai_divisor2;	// divisors for start of measure on external start
+	char ai12_startstop;	/*  measure can start/stop on external trigger */
+	unsigned int ai_divisor1, ai_divisor2;	/*  divisors for start of measure on external start */
 	unsigned int ai_data_len;
 	short *ai_data;
-	short ao_data[2];	// data output buffer
-	unsigned int ai_scans;	// number of scans to do
-	char dma_doublebuf;	// we can use double buffring
-	unsigned int dma_actbuf;	// which buffer is used now
-	short *dmabuf_virt[2];	// pointers to begin of DMA buffer
-	unsigned long dmabuf_hw[2];	// hw address of DMA buff
-	unsigned int dmabuf_size[2];	// size of dma buffer in bytes
-	unsigned int dmabuf_use_size[2];	// which size we may now used for transfer
-	unsigned int dmabuf_used_size[2];	// which size was trully used
+	short ao_data[2];	/*  data output buffer */
+	unsigned int ai_scans;	/*  number of scans to do */
+	char dma_doublebuf;	/*  we can use double buffring */
+	unsigned int dma_actbuf;	/*  which buffer is used now */
+	short *dmabuf_virt[2];	/*  pointers to begin of DMA buffer */
+	unsigned long dmabuf_hw[2];	/*  hw address of DMA buff */
+	unsigned int dmabuf_size[2];	/*  size of dma buffer in bytes */
+	unsigned int dmabuf_use_size[2];	/*  which size we may now used for transfer */
+	unsigned int dmabuf_used_size[2];	/*  which size was trully used */
 	unsigned int dmabuf_panic_size[2];
-	unsigned int dmabuf_samples[2];	// size in samples
-	int dmabuf_pages[2];	// number of pages in buffer
-	unsigned char cnt0_users;	// bit field of 8254 CNT0 users (0-unused, 1-AO, 2-DI, 3-DO)
-	unsigned char exttrg_users;	// bit field of external trigger users (0-AI, 1-AO, 2-DI, 3-DO)
-	unsigned int cnt0_divisor;	// actual CNT0 divisor
-	void (*int_ai_func) (struct comedi_device *, struct comedi_subdevice *, unsigned short, unsigned int, unsigned short);	// ptr to actual interrupt AI function
-	unsigned char ai16bits;	// =1 16 bit card
-	unsigned char usedma;	// =1 use DMA transfer and not INT
-	unsigned char useeoshandle;	// =1 change WAKE_EOS DMA transfer to fit on every second
-	unsigned char usessh;	// =1 turn on S&H support
-	int softsshdelay;	// >0 use software S&H, numer is requested delay in ns
-	unsigned char softsshsample;	// polarity of S&H signal in sample state
-	unsigned char softsshhold;	// polarity of S&H signal in hold state
-	unsigned int ai_maskerr;	// which warning was printed
-	unsigned int ai_maskharderr;	// on which error bits stops
-	unsigned int ai_inttrig_start;	// TRIG_INT for start
+	unsigned int dmabuf_samples[2];	/*  size in samples */
+	int dmabuf_pages[2];	/*  number of pages in buffer */
+	unsigned char cnt0_users;	/*  bit field of 8254 CNT0 users (0-unused, 1-AO, 2-DI, 3-DO) */
+	unsigned char exttrg_users;	/*  bit field of external trigger users (0-AI, 1-AO, 2-DI, 3-DO) */
+	unsigned int cnt0_divisor;	/*  actual CNT0 divisor */
+	void (*int_ai_func) (struct comedi_device *, struct comedi_subdevice *, unsigned short, unsigned int, unsigned short);	/*  ptr to actual interrupt AI function */
+	unsigned char ai16bits;	/*  =1 16 bit card */
+	unsigned char usedma;	/*  =1 use DMA transfer and not INT */
+	unsigned char useeoshandle;	/*  =1 change WAKE_EOS DMA transfer to fit on every second */
+	unsigned char usessh;	/*  =1 turn on S&H support */
+	int softsshdelay;	/*  >0 use software S&H, numer is requested delay in ns */
+	unsigned char softsshsample;	/*  polarity of S&H signal in sample state */
+	unsigned char softsshhold;	/*  polarity of S&H signal in hold state */
+	unsigned int ai_maskerr;	/*  which warning was printed */
+	unsigned int ai_maskharderr;	/*  on which error bits stops */
+	unsigned int ai_inttrig_start;	/*  TRIG_INT for start */
 };
 
 #define devpriv ((struct pci9118_private *)dev->private)
@@ -308,53 +309,53 @@ struct pci9118_private {
 ==============================================================================
 */
 
-static int check_channel_list(struct comedi_device * dev, struct comedi_subdevice * s,
+static int check_channel_list(struct comedi_device *dev, struct comedi_subdevice *s,
 	int n_chan, unsigned int *chanlist, int frontadd, int backadd);
-static int setup_channel_list(struct comedi_device * dev, struct comedi_subdevice * s,
+static int setup_channel_list(struct comedi_device *dev, struct comedi_subdevice *s,
 	int n_chan, unsigned int *chanlist, int rot, int frontadd, int backadd,
 	int usedma, char eoshandle);
-static void start_pacer(struct comedi_device * dev, int mode, unsigned int divisor1,
+static void start_pacer(struct comedi_device *dev, int mode, unsigned int divisor1,
 	unsigned int divisor2);
-static int pci9118_reset(struct comedi_device * dev);
-static int pci9118_exttrg_add(struct comedi_device * dev, unsigned char source);
-static int pci9118_exttrg_del(struct comedi_device * dev, unsigned char source);
-static int pci9118_ai_cancel(struct comedi_device * dev, struct comedi_subdevice * s);
-static void pci9118_calc_divisors(char mode, struct comedi_device * dev,
-	struct comedi_subdevice * s, unsigned int *tim1, unsigned int *tim2,
+static int pci9118_reset(struct comedi_device *dev);
+static int pci9118_exttrg_add(struct comedi_device *dev, unsigned char source);
+static int pci9118_exttrg_del(struct comedi_device *dev, unsigned char source);
+static int pci9118_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
+static void pci9118_calc_divisors(char mode, struct comedi_device *dev,
+	struct comedi_subdevice *s, unsigned int *tim1, unsigned int *tim2,
 	unsigned int flags, int chans, unsigned int *div1, unsigned int *div2,
 	char usessh, unsigned int chnsshfront);
 
 /*
 ==============================================================================
 */
-static int pci9118_insn_read_ai(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci9118_insn_read_ai(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 
 	int n, timeout;
 
 	devpriv->AdControlReg = AdControl_Int & 0xff;
 	devpriv->AdFunctionReg = AdFunction_PDTrg | AdFunction_PETrg;
-	outl(devpriv->AdFunctionReg, dev->iobase + PCI9118_ADFUNC);	// positive triggers, no S&H, no burst, burst stop, no post trigger, no about trigger, trigger stop
+	outl(devpriv->AdFunctionReg, dev->iobase + PCI9118_ADFUNC);	/*  positive triggers, no S&H, no burst, burst stop, no post trigger, no about trigger, trigger stop */
 
 	if (!setup_channel_list(dev, s, 1, &insn->chanspec, 0, 0, 0, 0, 0))
 		return -EINVAL;
 
-	outl(0, dev->iobase + PCI9118_DELFIFO);	// flush FIFO
+	outl(0, dev->iobase + PCI9118_DELFIFO);	/*  flush FIFO */
 
 	for (n = 0; n < insn->n; n++) {
 		outw(0, dev->iobase + PCI9118_SOFTTRG);	/* start conversion */
-		comedi_udelay(2);
+		udelay(2);
 		timeout = 100;
 		while (timeout--) {
 			if (inl(dev->iobase + PCI9118_ADSTAT) & AdStatus_ADrdy)
 				goto conv_finish;
-			comedi_udelay(1);
+			udelay(1);
 		}
 
 		comedi_error(dev, "A/D insn timeout");
 		data[n] = 0;
-		outl(0, dev->iobase + PCI9118_DELFIFO);	// flush FIFO
+		outl(0, dev->iobase + PCI9118_DELFIFO);	/*  flush FIFO */
 		return -ETIME;
 
 	      conv_finish:
@@ -369,7 +370,7 @@ static int pci9118_insn_read_ai(struct comedi_device * dev, struct comedi_subdev
 		}
 	}
 
-	outl(0, dev->iobase + PCI9118_DELFIFO);	// flush FIFO
+	outl(0, dev->iobase + PCI9118_DELFIFO);	/*  flush FIFO */
 	return n;
 
 }
@@ -377,8 +378,8 @@ static int pci9118_insn_read_ai(struct comedi_device * dev, struct comedi_subdev
 /*
 ==============================================================================
 */
-static int pci9118_insn_write_ao(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci9118_insn_write_ao(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n, chanreg, ch;
 
@@ -400,8 +401,8 @@ static int pci9118_insn_write_ao(struct comedi_device * dev, struct comedi_subde
 /*
 ==============================================================================
 */
-static int pci9118_insn_read_ao(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci9118_insn_read_ao(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n, chan;
 
@@ -415,8 +416,8 @@ static int pci9118_insn_read_ao(struct comedi_device * dev, struct comedi_subdev
 /*
 ==============================================================================
 */
-static int pci9118_insn_bits_di(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci9118_insn_bits_di(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	data[1] = inl(dev->iobase + PCI9118_DI) & 0xf;
 
@@ -426,8 +427,8 @@ static int pci9118_insn_bits_di(struct comedi_device * dev, struct comedi_subdev
 /*
 ==============================================================================
 */
-static int pci9118_insn_bits_do(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci9118_insn_bits_do(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (data[0]) {
 		s->state &= ~data[0];
@@ -442,7 +443,7 @@ static int pci9118_insn_bits_do(struct comedi_device * dev, struct comedi_subdev
 /*
 ==============================================================================
 */
-static void interrupt_pci9118_ai_mode4_switch(struct comedi_device * dev)
+static void interrupt_pci9118_ai_mode4_switch(struct comedi_device *dev)
 {
 	devpriv->AdFunctionReg =
 		AdFunction_PDTrg | AdFunction_PETrg | AdFunction_AM;
@@ -456,8 +457,8 @@ static void interrupt_pci9118_ai_mode4_switch(struct comedi_device * dev)
 	outl(devpriv->AdFunctionReg, dev->iobase + PCI9118_ADFUNC);
 }
 
-static unsigned int defragment_dma_buffer(struct comedi_device * dev,
-	struct comedi_subdevice * s, short * dma_buffer, unsigned int num_samples)
+static unsigned int defragment_dma_buffer(struct comedi_device *dev,
+	struct comedi_subdevice *s, short *dma_buffer, unsigned int num_samples)
 {
 	unsigned int i = 0, j = 0;
 	unsigned int start_pos = devpriv->ai_add_front,
@@ -480,8 +481,8 @@ static unsigned int defragment_dma_buffer(struct comedi_device * dev,
 /*
 ==============================================================================
 */
-static unsigned int move_block_from_dma(struct comedi_device * dev,
-	struct comedi_subdevice * s, short * dma_buffer, unsigned int num_samples)
+static unsigned int move_block_from_dma(struct comedi_device *dev,
+	struct comedi_subdevice *s, short *dma_buffer, unsigned int num_samples)
 {
 	unsigned int num_bytes;
 
@@ -501,8 +502,8 @@ static unsigned int move_block_from_dma(struct comedi_device * dev,
 /*
 ==============================================================================
 */
-static char pci9118_decode_error_status(struct comedi_device * dev,
-	struct comedi_subdevice * s, unsigned char m)
+static char pci9118_decode_error_status(struct comedi_device *dev,
+	struct comedi_subdevice *s, unsigned char m)
 {
 	if (m & 0x100) {
 		comedi_error(dev, "A/D FIFO Full status (Fatal Error!)");
@@ -531,7 +532,7 @@ static char pci9118_decode_error_status(struct comedi_device * dev,
 	return 0;
 }
 
-static void pci9118_ai_munge(struct comedi_device * dev, struct comedi_subdevice * s,
+static void pci9118_ai_munge(struct comedi_device *dev, struct comedi_subdevice *s,
 	void *data, unsigned int num_bytes, unsigned int start_chan_index)
 {
 	unsigned int i, num_samples = num_bytes / sizeof(short);
@@ -551,8 +552,8 @@ static void pci9118_ai_munge(struct comedi_device * dev, struct comedi_subdevice
 /*
 ==============================================================================
 */
-static void interrupt_pci9118_ai_onesample(struct comedi_device * dev,
-	struct comedi_subdevice * s, unsigned short int_adstat, unsigned int int_amcc,
+static void interrupt_pci9118_ai_onesample(struct comedi_device *dev,
+	struct comedi_subdevice *s, unsigned short int_adstat, unsigned int int_amcc,
 	unsigned short int_daq)
 {
 	register short sampl;
@@ -567,8 +568,8 @@ static void interrupt_pci9118_ai_onesample(struct comedi_device * dev,
 
 #ifdef PCI9118_PARANOIDCHECK
 	if (devpriv->ai16bits == 0) {
-		if ((sampl & 0x000f) != devpriv->chanlist[s->async->cur_chan]) {	// data dropout!
-			rt_printk
+		if ((sampl & 0x000f) != devpriv->chanlist[s->async->cur_chan]) {	/*  data dropout! */
+			printk
 				("comedi: A/D  SAMPL - data dropout: received channel %d, expected %d!\n",
 				sampl & 0x000f,
 				devpriv->chanlist[s->async->cur_chan]);
@@ -598,7 +599,7 @@ static void interrupt_pci9118_ai_onesample(struct comedi_device * dev,
 /*
 ==============================================================================
 */
-static void interrupt_pci9118_ai_dma(struct comedi_device * dev, struct comedi_subdevice * s,
+static void interrupt_pci9118_ai_dma(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned short int_adstat, unsigned int int_amcc,
 	unsigned short int_daq)
 {
@@ -621,14 +622,14 @@ static void interrupt_pci9118_ai_dma(struct comedi_device * dev, struct comedi_s
 	}
 
 	if (int_adstat & devpriv->ai_maskerr)
-//      if (int_adstat & 0x106)
+/* if (int_adstat & 0x106) */
 		if (pci9118_decode_error_status(dev, s, int_adstat))
 			return;
 
-	samplesinbuf = devpriv->dmabuf_use_size[devpriv->dma_actbuf] >> 1;	// number of received real samples
-//      DPRINTK("dma_actbuf=%d\n",devpriv->dma_actbuf);
+	samplesinbuf = devpriv->dmabuf_use_size[devpriv->dma_actbuf] >> 1;	/*  number of received real samples */
+/* DPRINTK("dma_actbuf=%d\n",devpriv->dma_actbuf); */
 
-	if (devpriv->dma_doublebuf) {	// switch DMA buffers if is used double buffering
+	if (devpriv->dma_doublebuf) {	/*  switch DMA buffers if is used double buffering */
 		next_dma_buf = 1 - devpriv->dma_actbuf;
 		outl(devpriv->dmabuf_hw[next_dma_buf],
 			devpriv->iobase_a + AMCC_OP_REG_MWAR);
@@ -641,15 +642,15 @@ static void interrupt_pci9118_ai_dma(struct comedi_device * dev, struct comedi_s
 	}
 
 	if (samplesinbuf) {
-		m = devpriv->ai_data_len >> 1;	// how many samples is to end of buffer
-//              DPRINTK("samps=%d m=%d %d %d\n",samplesinbuf,m,s->async->buf_int_count,s->async->buf_int_ptr);
+		m = devpriv->ai_data_len >> 1;	/*  how many samples is to end of buffer */
+/* DPRINTK("samps=%d m=%d %d %d\n",samplesinbuf,m,s->async->buf_int_count,s->async->buf_int_ptr); */
 		sampls = m;
 		move_block_from_dma(dev, s,
 			devpriv->dmabuf_virt[devpriv->dma_actbuf],
 			samplesinbuf);
-		m = m - sampls;	// m= how many samples was transfered
+		m = m - sampls;	/*  m= how many samples was transfered */
 	}
-//      DPRINTK("YYY\n");
+/* DPRINTK("YYY\n"); */
 
 	if (!devpriv->ai_neverending)
 		if (devpriv->ai_act_scan >= devpriv->ai_scans) {	/* all data sampled */
@@ -657,9 +658,9 @@ static void interrupt_pci9118_ai_dma(struct comedi_device * dev, struct comedi_s
 			s->async->events |= COMEDI_CB_EOA;
 		}
 
-	if (devpriv->dma_doublebuf) {	// switch dma buffers
+	if (devpriv->dma_doublebuf) {	/*  switch dma buffers */
 		devpriv->dma_actbuf = 1 - devpriv->dma_actbuf;
-	} else {		// restart DMA if is not used double buffering
+	} else {		/*  restart DMA if is not used double buffering */
 		outl(devpriv->dmabuf_hw[0],
 			devpriv->iobase_a + AMCC_OP_REG_MWAR);
 		outl(devpriv->dmabuf_use_size[0],
@@ -674,36 +675,36 @@ static void interrupt_pci9118_ai_dma(struct comedi_device * dev, struct comedi_s
 /*
 ==============================================================================
 */
-static irqreturn_t interrupt_pci9118(int irq, void *d PT_REGS_ARG)
+static irqreturn_t interrupt_pci9118(int irq, void *d)
 {
 	struct comedi_device *dev = d;
 	unsigned int int_daq = 0, int_amcc, int_adstat;
 
 	if (!dev->attached)
-		return IRQ_NONE;	// not fully initialized
+		return IRQ_NONE;	/*  not fully initialized */
 
-	int_daq = inl(dev->iobase + PCI9118_INTSRC) & 0xf;	// get IRQ reasons from card
-	int_amcc = inl(devpriv->iobase_a + AMCC_OP_REG_INTCSR);	// get INT register from AMCC chip
+	int_daq = inl(dev->iobase + PCI9118_INTSRC) & 0xf;	/*  get IRQ reasons from card */
+	int_amcc = inl(devpriv->iobase_a + AMCC_OP_REG_INTCSR);	/*  get INT register from AMCC chip */
 
-//      DPRINTK("INT daq=0x%01x amcc=0x%08x MWAR=0x%08x MWTC=0x%08x ADSTAT=0x%02x ai_do=%d\n", int_daq, int_amcc, inl(devpriv->iobase_a+AMCC_OP_REG_MWAR), inl(devpriv->iobase_a+AMCC_OP_REG_MWTC), inw(dev->iobase+PCI9118_ADSTAT)&0x1ff,devpriv->ai_do);
+/* DPRINTK("INT daq=0x%01x amcc=0x%08x MWAR=0x%08x MWTC=0x%08x ADSTAT=0x%02x ai_do=%d\n", int_daq, int_amcc, inl(devpriv->iobase_a+AMCC_OP_REG_MWAR), inl(devpriv->iobase_a+AMCC_OP_REG_MWTC), inw(dev->iobase+PCI9118_ADSTAT)&0x1ff,devpriv->ai_do); */
 
 	if ((!int_daq) && (!(int_amcc & ANY_S593X_INT)))
-		return IRQ_NONE;	// interrupt from other source
+		return IRQ_NONE;	/*  interrupt from other source */
 
-	outl(int_amcc | 0x00ff0000, devpriv->iobase_a + AMCC_OP_REG_INTCSR);	// shutdown IRQ reasons in AMCC
+	outl(int_amcc | 0x00ff0000, devpriv->iobase_a + AMCC_OP_REG_INTCSR);	/*  shutdown IRQ reasons in AMCC */
 
-	int_adstat = inw(dev->iobase + PCI9118_ADSTAT) & 0x1ff;	// get STATUS register
+	int_adstat = inw(dev->iobase + PCI9118_ADSTAT) & 0x1ff;	/*  get STATUS register */
 
 	if (devpriv->ai_do) {
 		if (devpriv->ai12_startstop)
-			if ((int_adstat & AdStatus_DTH) && (int_daq & Int_DTrg)) {	// start stop of measure
+			if ((int_adstat & AdStatus_DTH) && (int_daq & Int_DTrg)) {	/*  start stop of measure */
 				if (devpriv->ai12_startstop & START_AI_EXT) {
 					devpriv->ai12_startstop &=
 						~START_AI_EXT;
 					if (!(devpriv->ai12_startstop &
 							STOP_AI_EXT))
-						pci9118_exttrg_del(dev, EXTTRG_AI);	// deactivate EXT trigger
-					start_pacer(dev, devpriv->ai_do, devpriv->ai_divisor1, devpriv->ai_divisor2);	// start pacer
+						pci9118_exttrg_del(dev, EXTTRG_AI);	/*  deactivate EXT trigger */
+					start_pacer(dev, devpriv->ai_do, devpriv->ai_divisor1, devpriv->ai_divisor2);	/*  start pacer */
 					outl(devpriv->AdControlReg,
 						dev->iobase + PCI9118_ADCNTRL);
 				} else {
@@ -711,8 +712,8 @@ static irqreturn_t interrupt_pci9118(int irq, void *d PT_REGS_ARG)
 						ai12_startstop & STOP_AI_EXT) {
 						devpriv->ai12_startstop &=
 							~STOP_AI_EXT;
-						pci9118_exttrg_del(dev, EXTTRG_AI);	// deactivate EXT trigger
-						devpriv->ai_neverending = 0;	//well, on next interrupt from DMA/EOC measure will stop
+						pci9118_exttrg_del(dev, EXTTRG_AI);	/*  deactivate EXT trigger */
+						devpriv->ai_neverending = 0;	/* well, on next interrupt from DMA/EOC measure will stop */
 					}
 				}
 			}
@@ -727,7 +728,7 @@ static irqreturn_t interrupt_pci9118(int irq, void *d PT_REGS_ARG)
 /*
 ==============================================================================
 */
-static int pci9118_ai_inttrig(struct comedi_device * dev, struct comedi_subdevice * s,
+static int pci9118_ai_inttrig(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int trignum)
 {
 	if (trignum != devpriv->ai_inttrig_start)
@@ -751,8 +752,8 @@ static int pci9118_ai_inttrig(struct comedi_device * dev, struct comedi_subdevic
 /*
 ==============================================================================
 */
-static int pci9118_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int pci9118_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	int tmp, divisor1, divisor2;
@@ -949,11 +950,11 @@ static int pci9118_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevic
 
 	if (cmd->scan_begin_src == TRIG_TIMER) {
 		tmp = cmd->scan_begin_arg;
-//              rt_printk("S1 timer1=%u timer2=%u\n",cmd->scan_begin_arg,cmd->convert_arg);
+/* printk("S1 timer1=%u timer2=%u\n",cmd->scan_begin_arg,cmd->convert_arg); */
 		i8253_cascade_ns_to_timer(devpriv->i8254_osc_base, &divisor1,
 			&divisor2, &cmd->scan_begin_arg,
 			cmd->flags & TRIG_ROUND_MASK);
-//              rt_printk("S2 timer1=%u timer2=%u\n",cmd->scan_begin_arg,cmd->convert_arg);
+/* printk("S2 timer1=%u timer2=%u\n",cmd->scan_begin_arg,cmd->convert_arg); */
 		if (cmd->scan_begin_arg < this_board->ai_ns_min)
 			cmd->scan_begin_arg = this_board->ai_ns_min;
 		if (tmp != cmd->scan_begin_arg)
@@ -965,7 +966,7 @@ static int pci9118_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevic
 		i8253_cascade_ns_to_timer(devpriv->i8254_osc_base, &divisor1,
 			&divisor2, &cmd->convert_arg,
 			cmd->flags & TRIG_ROUND_MASK);
-//              rt_printk("s1 timer1=%u timer2=%u\n",cmd->scan_begin_arg,cmd->convert_arg);
+/* printk("s1 timer1=%u timer2=%u\n",cmd->scan_begin_arg,cmd->convert_arg); */
 		if (cmd->convert_arg < this_board->ai_ns_min)
 			cmd->convert_arg = this_board->ai_ns_min;
 		if (tmp != cmd->convert_arg)
@@ -979,7 +980,7 @@ static int pci9118_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevic
 					cmd->scan_begin_arg =
 						this_board->ai_ns_min *
 						(cmd->scan_end_arg + 2);
-//              rt_printk("s2 timer1=%u timer2=%u\n",cmd->scan_begin_arg,cmd->convert_arg);
+/* printk("s2 timer1=%u timer2=%u\n",cmd->scan_begin_arg,cmd->convert_arg); */
 					err++;
 				}
 			} else {
@@ -988,7 +989,7 @@ static int pci9118_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevic
 					cmd->scan_begin_arg =
 						cmd->convert_arg *
 						cmd->chanlist_len;
-//              rt_printk("s3 timer1=%u timer2=%u\n",cmd->scan_begin_arg,cmd->convert_arg);
+/* printk("s3 timer1=%u timer2=%u\n",cmd->scan_begin_arg,cmd->convert_arg); */
 					err++;
 				}
 			}
@@ -1001,7 +1002,7 @@ static int pci9118_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevic
 	if (cmd->chanlist)
 		if (!check_channel_list(dev, s, cmd->chanlist_len,
 				cmd->chanlist, 0, 0))
-			return 5;	// incorrect channels list
+			return 5;	/*  incorrect channels list */
 
 	return 0;
 }
@@ -1009,7 +1010,7 @@ static int pci9118_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevic
 /*
 ==============================================================================
 */
-static int Compute_and_setup_dma(struct comedi_device * dev)
+static int Compute_and_setup_dma(struct comedi_device *dev)
 {
 	unsigned int dmalen0, dmalen1, i;
 
@@ -1018,32 +1019,32 @@ static int Compute_and_setup_dma(struct comedi_device * dev)
 	dmalen1 = devpriv->dmabuf_size[1];
 	DPRINTK("1 dmalen0=%d dmalen1=%d ai_data_len=%d\n", dmalen0, dmalen1,
 		devpriv->ai_data_len);
-	// isn't output buff smaller that our DMA buff?
+	/*  isn't output buff smaller that our DMA buff? */
 	if (dmalen0 > (devpriv->ai_data_len)) {
-		dmalen0 = devpriv->ai_data_len & ~3L;	// allign to 32bit down
+		dmalen0 = devpriv->ai_data_len & ~3L;	/*  allign to 32bit down */
 	}
 	if (dmalen1 > (devpriv->ai_data_len)) {
-		dmalen1 = devpriv->ai_data_len & ~3L;	// allign to 32bit down
+		dmalen1 = devpriv->ai_data_len & ~3L;	/*  allign to 32bit down */
 	}
 	DPRINTK("2 dmalen0=%d dmalen1=%d \n", dmalen0, dmalen1);
 
-	// we want wake up every scan?
+	/*  we want wake up every scan? */
 	if (devpriv->ai_flags & TRIG_WAKE_EOS) {
 		if (dmalen0 < (devpriv->ai_n_realscanlen << 1)) {
-			// uff, too short DMA buffer, disable EOS support!
+			/*  uff, too short DMA buffer, disable EOS support! */
 			devpriv->ai_flags &= (~TRIG_WAKE_EOS);
-			rt_printk
+			printk
 				("comedi%d: WAR: DMA0 buf too short, cann't support TRIG_WAKE_EOS (%d<%d)\n",
 				dev->minor, dmalen0,
 				devpriv->ai_n_realscanlen << 1);
 		} else {
-			// short first DMA buffer to one scan
+			/*  short first DMA buffer to one scan */
 			dmalen0 = devpriv->ai_n_realscanlen << 1;
 			DPRINTK("21 dmalen0=%d ai_n_realscanlen=%d useeoshandle=%d\n", dmalen0, devpriv->ai_n_realscanlen, devpriv->useeoshandle);
 			if (devpriv->useeoshandle)
 				dmalen0 += 2;
 			if (dmalen0 < 4) {
-				rt_printk
+				printk
 					("comedi%d: ERR: DMA0 buf len bug? (%d<4)\n",
 					dev->minor, dmalen0);
 				dmalen0 = 4;
@@ -1052,20 +1053,20 @@ static int Compute_and_setup_dma(struct comedi_device * dev)
 	}
 	if (devpriv->ai_flags & TRIG_WAKE_EOS) {
 		if (dmalen1 < (devpriv->ai_n_realscanlen << 1)) {
-			// uff, too short DMA buffer, disable EOS support!
+			/*  uff, too short DMA buffer, disable EOS support! */
 			devpriv->ai_flags &= (~TRIG_WAKE_EOS);
-			rt_printk
+			printk
 				("comedi%d: WAR: DMA1 buf too short, cann't support TRIG_WAKE_EOS (%d<%d)\n",
 				dev->minor, dmalen1,
 				devpriv->ai_n_realscanlen << 1);
 		} else {
-			// short second DMA buffer to one scan
+			/*  short second DMA buffer to one scan */
 			dmalen1 = devpriv->ai_n_realscanlen << 1;
 			DPRINTK("22 dmalen1=%d ai_n_realscanlen=%d useeoshandle=%d\n", dmalen1, devpriv->ai_n_realscanlen, devpriv->useeoshandle);
 			if (devpriv->useeoshandle)
 				dmalen1 -= 2;
 			if (dmalen1 < 4) {
-				rt_printk
+				printk
 					("comedi%d: ERR: DMA1 buf len bug? (%d<4)\n",
 					dev->minor, dmalen1);
 				dmalen1 = 4;
@@ -1074,26 +1075,26 @@ static int Compute_and_setup_dma(struct comedi_device * dev)
 	}
 
 	DPRINTK("3 dmalen0=%d dmalen1=%d \n", dmalen0, dmalen1);
-	// transfer without TRIG_WAKE_EOS
+	/*  transfer without TRIG_WAKE_EOS */
 	if (!(devpriv->ai_flags & TRIG_WAKE_EOS)) {
-		// if it's possible then allign DMA buffers to length of scan
+		/*  if it's possible then allign DMA buffers to length of scan */
 		i = dmalen0;
 		dmalen0 =
 			(dmalen0 / (devpriv->ai_n_realscanlen << 1)) *
 			(devpriv->ai_n_realscanlen << 1);
 		dmalen0 &= ~3L;
 		if (!dmalen0)
-			dmalen0 = i;	// uff. very long scan?
+			dmalen0 = i;	/*  uff. very long scan? */
 		i = dmalen1;
 		dmalen1 =
 			(dmalen1 / (devpriv->ai_n_realscanlen << 1)) *
 			(devpriv->ai_n_realscanlen << 1);
 		dmalen1 &= ~3L;
 		if (!dmalen1)
-			dmalen1 = i;	// uff. very long scan?
-		// if measure isn't neverending then test, if it whole fits into one or two DMA buffers
+			dmalen1 = i;	/*  uff. very long scan? */
+		/*  if measure isn't neverending then test, if it whole fits into one or two DMA buffers */
 		if (!devpriv->ai_neverending) {
-			// fits whole measure into one DMA buffer?
+			/*  fits whole measure into one DMA buffer? */
 			if (dmalen0 >
 				((devpriv->ai_n_realscanlen << 1) *
 					devpriv->ai_scans)) {
@@ -1104,7 +1105,7 @@ static int Compute_and_setup_dma(struct comedi_device * dev)
 				DPRINTK("3.1 dmalen0=%d dmalen1=%d \n", dmalen0,
 					dmalen1);
 				dmalen0 &= ~3L;
-			} else {	// fits whole measure into two DMA buffer?
+			} else {	/*  fits whole measure into two DMA buffer? */
 				if (dmalen1 >
 					((devpriv->ai_n_realscanlen << 1) *
 						devpriv->ai_scans - dmalen0))
@@ -1121,7 +1122,7 @@ static int Compute_and_setup_dma(struct comedi_device * dev)
 
 	DPRINTK("4 dmalen0=%d dmalen1=%d \n", dmalen0, dmalen1);
 
-	// these DMA buffer size we'll be used
+	/*  these DMA buffer size we'll be used */
 	devpriv->dma_actbuf = 0;
 	devpriv->dmabuf_use_size[0] = dmalen0;
 	devpriv->dmabuf_use_size[1] = dmalen1;
@@ -1143,18 +1144,18 @@ static int Compute_and_setup_dma(struct comedi_device * dev)
 	}
 #endif
 
-	outl(inl(devpriv->iobase_a + AMCC_OP_REG_MCSR) & (~EN_A2P_TRANSFERS), devpriv->iobase_a + AMCC_OP_REG_MCSR);	// stop DMA
+	outl(inl(devpriv->iobase_a + AMCC_OP_REG_MCSR) & (~EN_A2P_TRANSFERS), devpriv->iobase_a + AMCC_OP_REG_MCSR);	/*  stop DMA */
 	outl(devpriv->dmabuf_hw[0], devpriv->iobase_a + AMCC_OP_REG_MWAR);
 	outl(devpriv->dmabuf_use_size[0], devpriv->iobase_a + AMCC_OP_REG_MWTC);
-	// init DMA transfer
+	/*  init DMA transfer */
 	outl(0x00000000 | AINT_WRITE_COMPL,
 		devpriv->iobase_a + AMCC_OP_REG_INTCSR);
-//      outl(0x02000000|AINT_WRITE_COMPL, devpriv->iobase_a+AMCC_OP_REG_INTCSR);
+/* outl(0x02000000|AINT_WRITE_COMPL, devpriv->iobase_a+AMCC_OP_REG_INTCSR); */
 
 	outl(inl(devpriv->iobase_a +
 			AMCC_OP_REG_MCSR) | RESET_A2P_FLAGS | A2P_HI_PRIORITY |
 		EN_A2P_TRANSFERS, devpriv->iobase_a + AMCC_OP_REG_MCSR);
-	outl(inl(devpriv->iobase_a + AMCC_OP_REG_INTCSR) | EN_A2P_TRANSFERS, devpriv->iobase_a + AMCC_OP_REG_INTCSR);	// allow bus mastering
+	outl(inl(devpriv->iobase_a + AMCC_OP_REG_INTCSR) | EN_A2P_TRANSFERS, devpriv->iobase_a + AMCC_OP_REG_INTCSR);	/*  allow bus mastering */
 
 	DPRINTK("adl_pci9118 EDBG: END: Compute_and_setup_dma()\n");
 	return 0;
@@ -1163,7 +1164,7 @@ static int Compute_and_setup_dma(struct comedi_device * dev)
 /*
 ==============================================================================
 */
-static int pci9118_ai_docmd_sampl(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pci9118_ai_docmd_sampl(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	DPRINTK("adl_pci9118 EDBG: BGN: pci9118_ai_docmd_sampl(%d,) [%d]\n",
 		dev->minor, devpriv->ai_do);
@@ -1186,17 +1187,17 @@ static int pci9118_ai_docmd_sampl(struct comedi_device * dev, struct comedi_subd
 		return -EIO;
 	};
 
-	devpriv->int_ai_func = interrupt_pci9118_ai_onesample;	//transfer function
+	devpriv->int_ai_func = interrupt_pci9118_ai_onesample;	/* transfer function */
 
 	if (devpriv->ai12_startstop)
-		pci9118_exttrg_add(dev, EXTTRG_AI);	// activate EXT trigger
+		pci9118_exttrg_add(dev, EXTTRG_AI);	/*  activate EXT trigger */
 
 	if ((devpriv->ai_do == 1) || (devpriv->ai_do == 2))
 		devpriv->IntControlReg |= Int_Timer;
 
 	devpriv->AdControlReg |= AdControl_Int;
 
-	outl(inl(devpriv->iobase_a + AMCC_OP_REG_INTCSR) | 0x1f00, devpriv->iobase_a + AMCC_OP_REG_INTCSR);	// allow INT in AMCC
+	outl(inl(devpriv->iobase_a + AMCC_OP_REG_INTCSR) | 0x1f00, devpriv->iobase_a + AMCC_OP_REG_INTCSR);	/*  allow INT in AMCC */
 
 	if (!(devpriv->ai12_startstop & (START_AI_EXT | START_AI_INT))) {
 		outl(devpriv->IntControlReg, dev->iobase + PCI9118_INTCTRL);
@@ -1216,7 +1217,7 @@ static int pci9118_ai_docmd_sampl(struct comedi_device * dev, struct comedi_subd
 /*
 ==============================================================================
 */
-static int pci9118_ai_docmd_dma(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pci9118_ai_docmd_dma(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	DPRINTK("adl_pci9118 EDBG: BGN: pci9118_ai_docmd_dma(%d,) [%d,%d]\n",
 		dev->minor, devpriv->ai_do, devpriv->usedma);
@@ -1261,10 +1262,10 @@ static int pci9118_ai_docmd_dma(struct comedi_device * dev, struct comedi_subdev
 	};
 
 	if (devpriv->ai12_startstop) {
-		pci9118_exttrg_add(dev, EXTTRG_AI);	// activate EXT trigger
+		pci9118_exttrg_add(dev, EXTTRG_AI);	/*  activate EXT trigger */
 	}
 
-	devpriv->int_ai_func = interrupt_pci9118_ai_dma;	//transfer function
+	devpriv->int_ai_func = interrupt_pci9118_ai_dma;	/* transfer function */
 
 	outl(0x02000000 | AINT_WRITE_COMPL,
 		devpriv->iobase_a + AMCC_OP_REG_INTCSR);
@@ -1287,7 +1288,7 @@ static int pci9118_ai_docmd_dma(struct comedi_device * dev, struct comedi_subdev
 /*
 ==============================================================================
 */
-static int pci9118_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pci9118_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct comedi_cmd *cmd = &s->async->cmd;
 	unsigned int addchans = 0;
@@ -1307,7 +1308,7 @@ static int pci9118_ai_cmd(struct comedi_device * dev, struct comedi_subdevice *
 	devpriv->ai_add_back = 0;
 	devpriv->ai_maskerr = 0x10e;
 
-	// prepare for start/stop conditions
+	/*  prepare for start/stop conditions */
 	if (cmd->start_src == TRIG_EXT)
 		devpriv->ai12_startstop |= START_AI_EXT;
 	if (cmd->stop_src == TRIG_EXT) {
@@ -1334,19 +1335,19 @@ static int pci9118_ai_cmd(struct comedi_device * dev, struct comedi_subdevice *
 		devpriv->ai_scans = 0;
 	}
 
-	// use sample&hold signal?
+	/*  use sample&hold signal? */
 	if (cmd->convert_src == TRIG_NOW) {
 		devpriv->usessh = 1;
-	}			// yes
+	}			/*  yes */
 	else {
 		devpriv->usessh = 0;
-	}			// no
+	}			/*  no */
 
 	DPRINTK("1 neverending=%d scans=%u usessh=%d ai_startstop=0x%2x\n",
 		devpriv->ai_neverending, devpriv->ai_scans, devpriv->usessh,
 		devpriv->ai12_startstop);
 
-	// use additional sample at end of every scan to satisty DMA 32 bit transfer?
+	/*  use additional sample at end of every scan to satisty DMA 32 bit transfer? */
 	devpriv->ai_add_front = 0;
 	devpriv->ai_add_back = 0;
 	devpriv->useeoshandle = 0;
@@ -1358,27 +1359,27 @@ static int pci9118_ai_cmd(struct comedi_device * dev, struct comedi_subdevice *
 				devpriv->ai_add_back = 1;
 			}
 			if (cmd->convert_src == TRIG_TIMER) {
-				devpriv->usedma = 0;	// use INT transfer if scanlist have only one channel
+				devpriv->usedma = 0;	/*  use INT transfer if scanlist have only one channel */
 			}
 		}
 		if ((cmd->flags & TRIG_WAKE_EOS) &&
 			(devpriv->ai_n_scanlen & 1) &&
 			(devpriv->ai_n_scanlen > 1)) {
 			if (cmd->scan_begin_src == TRIG_FOLLOW) {
-				//vpriv->useeoshandle=1; // change DMA transfer block to fit EOS on every second call
-				devpriv->usedma = 0;	// XXX maybe can be corrected to use 16 bit DMA
-			} else {	// well, we must insert one sample to end of EOS to meet 32 bit transfer
+				/* vpriv->useeoshandle=1; // change DMA transfer block to fit EOS on every second call */
+				devpriv->usedma = 0;	/*  XXX maybe can be corrected to use 16 bit DMA */
+			} else {	/*  well, we must insert one sample to end of EOS to meet 32 bit transfer */
 				devpriv->ai_add_back = 1;
 			}
 		}
-	} else {		// interrupt transfer don't need any correction
+	} else {		/*  interrupt transfer don't need any correction */
 		devpriv->usedma = 0;
 	}
 
-	// we need software S&H signal? It add  two samples before every scan as minimum
+	/*  we need software S&H signal? It add  two samples before every scan as minimum */
 	if (devpriv->usessh && devpriv->softsshdelay) {
 		devpriv->ai_add_front = 2;
-		if ((devpriv->usedma == 1) && (devpriv->ai_add_back == 1)) {	// move it to front
+		if ((devpriv->usedma == 1) && (devpriv->ai_add_back == 1)) {	/*  move it to front */
 			devpriv->ai_add_front++;
 			devpriv->ai_add_back = 0;
 		}
@@ -1387,17 +1388,17 @@ static int pci9118_ai_cmd(struct comedi_device * dev, struct comedi_subdevice *
 		addchans = devpriv->softsshdelay / cmd->convert_arg;
 		if (devpriv->softsshdelay % cmd->convert_arg)
 			addchans++;
-		if (addchans > (devpriv->ai_add_front - 1)) {	// uff, still short :-(
+		if (addchans > (devpriv->ai_add_front - 1)) {	/*  uff, still short :-( */
 			devpriv->ai_add_front = addchans + 1;
 			if (devpriv->usedma == 1)
 				if ((devpriv->ai_add_front +
 						devpriv->ai_n_chan +
 						devpriv->ai_add_back) & 1)
-					devpriv->ai_add_front++;	// round up to 32 bit
+					devpriv->ai_add_front++;	/*  round up to 32 bit */
 		}
-	}			// well, we now know what must be all added
+	}			/*  well, we now know what must be all added */
 
-	devpriv->ai_n_realscanlen =	// what we must take from card in real to have ai_n_scanlen on output?
+	devpriv->ai_n_realscanlen =	/*  what we must take from card in real to have ai_n_scanlen on output? */
 		(devpriv->ai_add_front + devpriv->ai_n_chan +
 		devpriv->ai_add_back) * (devpriv->ai_n_scanlen /
 		devpriv->ai_n_chan);
@@ -1408,7 +1409,7 @@ static int pci9118_ai_cmd(struct comedi_device * dev, struct comedi_subdevice *
 		devpriv->ai_n_chan, devpriv->ai_add_back,
 		devpriv->ai_n_scanlen);
 
-	// check and setup channel list
+	/*  check and setup channel list */
 	if (!check_channel_list(dev, s, devpriv->ai_n_chan,
 			devpriv->ai_chanlist, devpriv->ai_add_front,
 			devpriv->ai_add_back))
@@ -1419,9 +1420,9 @@ static int pci9118_ai_cmd(struct comedi_device * dev, struct comedi_subdevice *
 			devpriv->useeoshandle))
 		return -EINVAL;
 
-	// compute timers settings
-	// simplest way, fr=4Mhz/(tim1*tim2), channel manipulation without timers effect
-	if (((cmd->scan_begin_src == TRIG_FOLLOW) || (cmd->scan_begin_src == TRIG_EXT) || (cmd->scan_begin_src == TRIG_INT)) && (cmd->convert_src == TRIG_TIMER)) {	// both timer is used for one time
+	/*  compute timers settings */
+	/*  simplest way, fr=4Mhz/(tim1*tim2), channel manipulation without timers effect */
+	if (((cmd->scan_begin_src == TRIG_FOLLOW) || (cmd->scan_begin_src == TRIG_EXT) || (cmd->scan_begin_src == TRIG_INT)) && (cmd->convert_src == TRIG_TIMER)) {	/*  both timer is used for one time */
 		if (cmd->scan_begin_src == TRIG_EXT) {
 			devpriv->ai_do = 4;
 		} else {
@@ -1435,7 +1436,7 @@ static int pci9118_ai_cmd(struct comedi_device * dev, struct comedi_subdevice *
 		devpriv->ai_timer2 = cmd->convert_arg;
 	}
 
-	if ((cmd->scan_begin_src == TRIG_TIMER) && ((cmd->convert_src == TRIG_TIMER) || (cmd->convert_src == TRIG_NOW))) {	// double timed action
+	if ((cmd->scan_begin_src == TRIG_TIMER) && ((cmd->convert_src == TRIG_TIMER) || (cmd->convert_src == TRIG_NOW))) {	/*  double timed action */
 		if (!devpriv->usedma) {
 			comedi_error(dev,
 				"cmd->scan_begin_src=TRIG_TIMER works only with bus mastering!");
@@ -1457,15 +1458,15 @@ static int pci9118_ai_cmd(struct comedi_device * dev, struct comedi_subdevice *
 		devpriv->ai_do = 3;
 	}
 
-	start_pacer(dev, -1, 0, 0);	// stop pacer
+	start_pacer(dev, -1, 0, 0);	/*  stop pacer */
 
-	devpriv->AdControlReg = 0;	// bipolar, S.E., use 8254, stop 8354, internal trigger, soft trigger, disable DMA
+	devpriv->AdControlReg = 0;	/*  bipolar, S.E., use 8254, stop 8354, internal trigger, soft trigger, disable DMA */
 	outl(devpriv->AdControlReg, dev->iobase + PCI9118_ADCNTRL);
-	devpriv->AdFunctionReg = AdFunction_PDTrg | AdFunction_PETrg;	// positive triggers, no S&H, no burst, burst stop, no post trigger, no about trigger, trigger stop
+	devpriv->AdFunctionReg = AdFunction_PDTrg | AdFunction_PETrg;	/*  positive triggers, no S&H, no burst, burst stop, no post trigger, no about trigger, trigger stop */
 	outl(devpriv->AdFunctionReg, dev->iobase + PCI9118_ADFUNC);
-	comedi_udelay(1);
-	outl(0, dev->iobase + PCI9118_DELFIFO);	// flush FIFO
-	inl(dev->iobase + PCI9118_ADSTAT);	// flush A/D and INT status register
+	udelay(1);
+	outl(0, dev->iobase + PCI9118_DELFIFO);	/*  flush FIFO */
+	inl(dev->iobase + PCI9118_ADSTAT);	/*  flush A/D and INT status register */
 	inl(dev->iobase + PCI9118_INTSRC);
 
 	devpriv->ai_act_scan = 0;
@@ -1473,11 +1474,10 @@ static int pci9118_ai_cmd(struct comedi_device * dev, struct comedi_subdevice *
 	s->async->cur_chan = 0;
 	devpriv->ai_buf_ptr = 0;
 
-	if (devpriv->usedma) {
+	if (devpriv->usedma)
 		ret = pci9118_ai_docmd_dma(dev, s);
-	} else {
+	else
 		ret = pci9118_ai_docmd_sampl(dev, s);
-	}
 
 	DPRINTK("adl_pci9118 EDBG: END: pci9118_ai_cmd()\n");
 	return ret;
@@ -1486,7 +1486,7 @@ static int pci9118_ai_cmd(struct comedi_device * dev, struct comedi_subdevice *
 /*
 ==============================================================================
 */
-static int check_channel_list(struct comedi_device * dev, struct comedi_subdevice * s,
+static int check_channel_list(struct comedi_device *dev, struct comedi_subdevice *s,
 	int n_chan, unsigned int *chanlist, int frontadd, int backadd)
 {
 	unsigned int i, differencial = 0, bipolar = 0;
@@ -1497,7 +1497,7 @@ static int check_channel_list(struct comedi_device * dev, struct comedi_subdevic
 		return 0;
 	}
 	if ((frontadd + n_chan + backadd) > s->len_chanlist) {
-		rt_printk
+		printk
 			("comedi%d: range/channel list is too long for actual configuration (%d>%d)!",
 			dev->minor, n_chan,
 			s->len_chanlist - frontadd - backadd);
@@ -1505,11 +1505,11 @@ static int check_channel_list(struct comedi_device * dev, struct comedi_subdevic
 	}
 
 	if (CR_AREF(chanlist[0]) == AREF_DIFF)
-		differencial = 1;	// all input must be diff
+		differencial = 1;	/*  all input must be diff */
 	if (CR_RANGE(chanlist[0]) < PCI9118_BIPOLAR_RANGES)
-		bipolar = 1;	// all input must be bipolar
+		bipolar = 1;	/*  all input must be bipolar */
 	if (n_chan > 1)
-		for (i = 1; i < n_chan; i++) {	// check S.E/diff
+		for (i = 1; i < n_chan; i++) {	/*  check S.E/diff */
 			if ((CR_AREF(chanlist[i]) == AREF_DIFF) !=
 				(differencial)) {
 				comedi_error(dev,
@@ -1537,7 +1537,7 @@ static int check_channel_list(struct comedi_device * dev, struct comedi_subdevic
 /*
 ==============================================================================
 */
-static int setup_channel_list(struct comedi_device * dev, struct comedi_subdevice * s,
+static int setup_channel_list(struct comedi_device *dev, struct comedi_subdevice *s,
 	int n_chan, unsigned int *chanlist, int rot, int frontadd, int backadd,
 	int usedma, char useeos)
 {
@@ -1552,27 +1552,27 @@ static int setup_channel_list(struct comedi_device * dev, struct comedi_subdevic
 	}
 
 	if (CR_AREF(chanlist[0]) == AREF_DIFF)
-		differencial = 1;	// all input must be diff
+		differencial = 1;	/*  all input must be diff */
 	if (CR_RANGE(chanlist[0]) < PCI9118_BIPOLAR_RANGES)
-		bipolar = 1;	// all input must be bipolar
+		bipolar = 1;	/*  all input must be bipolar */
 
-	// All is ok, so we can setup channel/range list
+	/*  All is ok, so we can setup channel/range list */
 
 	if (!bipolar) {
-		devpriv->AdControlReg |= AdControl_UniP;	// set unibipolar
+		devpriv->AdControlReg |= AdControl_UniP;	/*  set unibipolar */
 	} else {
-		devpriv->AdControlReg &= ((~AdControl_UniP) & 0xff);	// enable bipolar
+		devpriv->AdControlReg &= ((~AdControl_UniP) & 0xff);	/*  enable bipolar */
 	}
 
 	if (differencial) {
-		devpriv->AdControlReg |= AdControl_Diff;	// enable diff inputs
+		devpriv->AdControlReg |= AdControl_Diff;	/*  enable diff inputs */
 	} else {
-		devpriv->AdControlReg &= ((~AdControl_Diff) & 0xff);	// set single ended inputs
+		devpriv->AdControlReg &= ((~AdControl_Diff) & 0xff);	/*  set single ended inputs */
 	}
 
-	outl(devpriv->AdControlReg, dev->iobase + PCI9118_ADCNTRL);	// setup mode
+	outl(devpriv->AdControlReg, dev->iobase + PCI9118_ADCNTRL);	/*  setup mode */
 
-	outl(2, dev->iobase + PCI9118_SCANMOD);	// gods know why this sequence!
+	outl(2, dev->iobase + PCI9118_SCANMOD);	/*  gods know why this sequence! */
 	outl(0, dev->iobase + PCI9118_SCANMOD);
 	outl(1, dev->iobase + PCI9118_SCANMOD);
 
@@ -1582,12 +1582,12 @@ static int setup_channel_list(struct comedi_device * dev, struct comedi_subdevic
 		devpriv->chanlist[i] = 0x55aa;
 #endif
 
-	if (frontadd) {		// insert channels for S&H
+	if (frontadd) {		/*  insert channels for S&H */
 		ssh = devpriv->softsshsample;
 		DPRINTK("FA: %04x: ", ssh);
-		for (i = 0; i < frontadd; i++) {	// store range list to card
-			scanquad = CR_CHAN(chanlist[0]);	// get channel number;
-			gain = CR_RANGE(chanlist[0]);	// get gain number
+		for (i = 0; i < frontadd; i++) {	/*  store range list to card */
+			scanquad = CR_CHAN(chanlist[0]);	/*  get channel number; */
+			gain = CR_RANGE(chanlist[0]);	/*  get gain number */
 			scanquad |= ((gain & 0x03) << 8);
 			outl(scanquad | ssh, dev->iobase + PCI9118_GAIN);
 			DPRINTK("%02x ", scanquad | ssh);
@@ -1597,23 +1597,23 @@ static int setup_channel_list(struct comedi_device * dev, struct comedi_subdevic
 	}
 
 	DPRINTK("SL: ", ssh);
-	for (i = 0; i < n_chan; i++) {	// store range list to card
-		scanquad = CR_CHAN(chanlist[i]);	// get channel number;
+	for (i = 0; i < n_chan; i++) {	/*  store range list to card */
+		scanquad = CR_CHAN(chanlist[i]);	/*  get channel number; */
 #ifdef PCI9118_PARANOIDCHECK
 		devpriv->chanlist[i ^ usedma] = (scanquad & 0xf) << rot;
 #endif
-		gain = CR_RANGE(chanlist[i]);	// get gain number
+		gain = CR_RANGE(chanlist[i]);	/*  get gain number */
 		scanquad |= ((gain & 0x03) << 8);
 		outl(scanquad | ssh, dev->iobase + PCI9118_GAIN);
 		DPRINTK("%02x ", scanquad | ssh);
 	}
 	DPRINTK("\n ");
 
-	if (backadd) {		// insert channels for fit onto 32bit DMA
+	if (backadd) {		/*  insert channels for fit onto 32bit DMA */
 		DPRINTK("BA: %04x: ", ssh);
-		for (i = 0; i < backadd; i++) {	// store range list to card
-			scanquad = CR_CHAN(chanlist[0]);	// get channel number;
-			gain = CR_RANGE(chanlist[0]);	// get gain number
+		for (i = 0; i < backadd; i++) {	/*  store range list to card */
+			scanquad = CR_CHAN(chanlist[0]);	/*  get channel number; */
+			gain = CR_RANGE(chanlist[0]);	/*  get gain number */
 			scanquad |= ((gain & 0x03) << 8);
 			outl(scanquad | ssh, dev->iobase + PCI9118_GAIN);
 			DPRINTK("%02x ", scanquad | ssh);
@@ -1621,13 +1621,13 @@ static int setup_channel_list(struct comedi_device * dev, struct comedi_subdevic
 		DPRINTK("\n ");
 	}
 #ifdef PCI9118_PARANOIDCHECK
-	devpriv->chanlist[n_chan ^ usedma] = devpriv->chanlist[0 ^ usedma];	// for 32bit oerations
+	devpriv->chanlist[n_chan ^ usedma] = devpriv->chanlist[0 ^ usedma];	/*  for 32bit oerations */
 	if (useeos) {
-		for (i = 1; i < n_chan; i++) {	// store range list to card
+		for (i = 1; i < n_chan; i++) {	/*  store range list to card */
 			devpriv->chanlist[(n_chan + i) ^ usedma] =
 				(CR_CHAN(chanlist[i]) & 0xf) << rot;
 		}
-		devpriv->chanlist[(2 * n_chan) ^ usedma] = devpriv->chanlist[0 ^ usedma];	// for 32bit oerations
+		devpriv->chanlist[(2 * n_chan) ^ usedma] = devpriv->chanlist[0 ^ usedma];	/*  for 32bit oerations */
 		useeos = 2;
 	} else {
 		useeos = 1;
@@ -1640,19 +1640,19 @@ static int setup_channel_list(struct comedi_device * dev, struct comedi_subdevic
 	DPRINTK("\n ");
 #endif
 #endif
-	outl(0, dev->iobase + PCI9118_SCANMOD);	// close scan queue
-//      comedi_udelay(100);                             // important delay, or first sample will be cripled
+	outl(0, dev->iobase + PCI9118_SCANMOD);	/*  close scan queue */
+/* udelay(100);                               important delay, or first sample will be cripled */
 
 	DPRINTK("adl_pci9118 EDBG: END: setup_channel_list()\n");
-	return 1;		// we can serve this with scan logic
+	return 1;		/*  we can serve this with scan logic */
 }
 
 /*
 ==============================================================================
   calculate 8254 divisors if they are used for dual timing
 */
-static void pci9118_calc_divisors(char mode, struct comedi_device * dev,
-	struct comedi_subdevice * s, unsigned int *tim1, unsigned int *tim2,
+static void pci9118_calc_divisors(char mode, struct comedi_device *dev,
+	struct comedi_subdevice *s, unsigned int *tim1, unsigned int *tim2,
 	unsigned int flags, int chans, unsigned int *div1, unsigned int *div2,
 	char usessh, unsigned int chnsshfront)
 {
@@ -1672,17 +1672,17 @@ static void pci9118_calc_divisors(char mode, struct comedi_device * dev,
 			*tim2 = this_board->ai_ns_min;
 		DPRINTK("1 div1=%u div2=%u timer1=%u timer2=%u\n", *div1, *div2,
 			*tim1, *tim2);
-		*div1 = *tim2 / devpriv->i8254_osc_base;	// convert timer (burst)
+		*div1 = *tim2 / devpriv->i8254_osc_base;	/*  convert timer (burst) */
 		DPRINTK("2 div1=%u div2=%u timer1=%u timer2=%u\n", *div1, *div2,
 			*tim1, *tim2);
 		if (*div1 < this_board->ai_pacer_min)
 			*div1 = this_board->ai_pacer_min;
 		DPRINTK("3 div1=%u div2=%u timer1=%u timer2=%u\n", *div1, *div2,
 			*tim1, *tim2);
-		*div2 = *tim1 / devpriv->i8254_osc_base;	// scan timer
+		*div2 = *tim1 / devpriv->i8254_osc_base;	/*  scan timer */
 		DPRINTK("4 div1=%u div2=%u timer1=%u timer2=%u\n", *div1, *div2,
 			*tim1, *tim2);
-		*div2 = *div2 / *div1;	// major timer is c1*c2
+		*div2 = *div2 / *div1;	/*  major timer is c1*c2 */
 		DPRINTK("5 div1=%u div2=%u timer1=%u timer2=%u\n", *div1, *div2,
 			*tim1, *tim2);
 		if (*div2 < chans)
@@ -1690,9 +1690,9 @@ static void pci9118_calc_divisors(char mode, struct comedi_device * dev,
 		DPRINTK("6 div1=%u div2=%u timer1=%u timer2=%u\n", *div1, *div2,
 			*tim1, *tim2);
 
-		*tim2 = *div1 * devpriv->i8254_osc_base;	// real convert timer
+		*tim2 = *div1 * devpriv->i8254_osc_base;	/*  real convert timer */
 
-		if (usessh & (chnsshfront == 0))	// use BSSH signal
+		if (usessh & (chnsshfront == 0))	/*  use BSSH signal */
 			if (*div2 < (chans + 2))
 				*div2 = chans + 2;
 
@@ -1710,13 +1710,13 @@ static void pci9118_calc_divisors(char mode, struct comedi_device * dev,
 /*
 ==============================================================================
 */
-static void start_pacer(struct comedi_device * dev, int mode, unsigned int divisor1,
+static void start_pacer(struct comedi_device *dev, int mode, unsigned int divisor1,
 	unsigned int divisor2)
 {
 	outl(0x74, dev->iobase + PCI9118_CNTCTRL);
 	outl(0xb4, dev->iobase + PCI9118_CNTCTRL);
-//      outl(0x30, dev->iobase + PCI9118_CNTCTRL);
-	comedi_udelay(1);
+/* outl(0x30, dev->iobase + PCI9118_CNTCTRL); */
+	udelay(1);
 
 	if ((mode == 1) || (mode == 2) || (mode == 4)) {
 		outl(divisor2 & 0xff, dev->iobase + PCI9118_CNT2);
@@ -1729,29 +1729,29 @@ static void start_pacer(struct comedi_device * dev, int mode, unsigned int divis
 /*
 ==============================================================================
 */
-static int pci9118_exttrg_add(struct comedi_device * dev, unsigned char source)
+static int pci9118_exttrg_add(struct comedi_device *dev, unsigned char source)
 {
 	if (source > 3)
-		return -1;	// incorrect source
+		return -1;	/*  incorrect source */
 	devpriv->exttrg_users |= (1 << source);
 	devpriv->IntControlReg |= Int_DTrg;
 	outl(devpriv->IntControlReg, dev->iobase + PCI9118_INTCTRL);
-	outl(inl(devpriv->iobase_a + AMCC_OP_REG_INTCSR) | 0x1f00, devpriv->iobase_a + AMCC_OP_REG_INTCSR);	// allow INT in AMCC
+	outl(inl(devpriv->iobase_a + AMCC_OP_REG_INTCSR) | 0x1f00, devpriv->iobase_a + AMCC_OP_REG_INTCSR);	/*  allow INT in AMCC */
 	return 0;
 }
 
 /*
 ==============================================================================
 */
-static int pci9118_exttrg_del(struct comedi_device * dev, unsigned char source)
+static int pci9118_exttrg_del(struct comedi_device *dev, unsigned char source)
 {
 	if (source > 3)
-		return -1;	// incorrect source
+		return -1;	/*  incorrect source */
 	devpriv->exttrg_users &= ~(1 << source);
-	if (!devpriv->exttrg_users) {	// shutdown ext trg intterrupts
+	if (!devpriv->exttrg_users) {	/*  shutdown ext trg intterrupts */
 		devpriv->IntControlReg &= ~Int_DTrg;
-		if (!devpriv->IntControlReg)	// all IRQ disabled
-			outl(inl(devpriv->iobase_a + AMCC_OP_REG_INTCSR) & (~0x00001f00), devpriv->iobase_a + AMCC_OP_REG_INTCSR);	// disable int in AMCC
+		if (!devpriv->IntControlReg)	/*  all IRQ disabled */
+			outl(inl(devpriv->iobase_a + AMCC_OP_REG_INTCSR) & (~0x00001f00), devpriv->iobase_a + AMCC_OP_REG_INTCSR);	/*  disable int in AMCC */
 		outl(devpriv->IntControlReg, dev->iobase + PCI9118_INTCTRL);
 	}
 	return 0;
@@ -1760,20 +1760,20 @@ static int pci9118_exttrg_del(struct comedi_device * dev, unsigned char source)
 /*
 ==============================================================================
 */
-static int pci9118_ai_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pci9118_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	if (devpriv->usedma)
-		outl(inl(devpriv->iobase_a + AMCC_OP_REG_MCSR) & (~EN_A2P_TRANSFERS), devpriv->iobase_a + AMCC_OP_REG_MCSR);	// stop DMA
+		outl(inl(devpriv->iobase_a + AMCC_OP_REG_MCSR) & (~EN_A2P_TRANSFERS), devpriv->iobase_a + AMCC_OP_REG_MCSR);	/*  stop DMA */
 	pci9118_exttrg_del(dev, EXTTRG_AI);
-	start_pacer(dev, 0, 0, 0);	// stop 8254 counters
+	start_pacer(dev, 0, 0, 0);	/*  stop 8254 counters */
 	devpriv->AdFunctionReg = AdFunction_PDTrg | AdFunction_PETrg;
-	outl(devpriv->AdFunctionReg, dev->iobase + PCI9118_ADFUNC);	// positive triggers, no S&H, no burst, burst stop, no post trigger, no about trigger, trigger stop
+	outl(devpriv->AdFunctionReg, dev->iobase + PCI9118_ADFUNC);	/*  positive triggers, no S&H, no burst, burst stop, no post trigger, no about trigger, trigger stop */
 	devpriv->AdControlReg = 0x00;
-	outl(devpriv->AdControlReg, dev->iobase + PCI9118_ADCNTRL);	// bipolar, S.E., use 8254, stop 8354, internal trigger, soft trigger, disable INT and DMA
+	outl(devpriv->AdControlReg, dev->iobase + PCI9118_ADCNTRL);	/*  bipolar, S.E., use 8254, stop 8354, internal trigger, soft trigger, disable INT and DMA */
 	outl(0, dev->iobase + PCI9118_BURST);
 	outl(1, dev->iobase + PCI9118_SCANMOD);
-	outl(2, dev->iobase + PCI9118_SCANMOD);	// reset scan queue
-	outl(0, dev->iobase + PCI9118_DELFIFO);	// flush FIFO
+	outl(2, dev->iobase + PCI9118_SCANMOD);	/*  reset scan queue */
+	outl(0, dev->iobase + PCI9118_DELFIFO);	/*  flush FIFO */
 
 	devpriv->ai_do = 0;
 	devpriv->usedma = 0;
@@ -1787,7 +1787,7 @@ static int pci9118_ai_cancel(struct comedi_device * dev, struct comedi_subdevice
 	devpriv->dma_actbuf = 0;
 
 	if (!devpriv->IntControlReg)
-		outl(inl(devpriv->iobase_a + AMCC_OP_REG_INTCSR) | 0x1f00, devpriv->iobase_a + AMCC_OP_REG_INTCSR);	// allow INT in AMCC
+		outl(inl(devpriv->iobase_a + AMCC_OP_REG_INTCSR) | 0x1f00, devpriv->iobase_a + AMCC_OP_REG_INTCSR);	/*  allow INT in AMCC */
 
 	return 0;
 }
@@ -1795,36 +1795,36 @@ static int pci9118_ai_cancel(struct comedi_device * dev, struct comedi_subdevice
 /*
 ==============================================================================
 */
-static int pci9118_reset(struct comedi_device * dev)
+static int pci9118_reset(struct comedi_device *dev)
 {
 	devpriv->IntControlReg = 0;
 	devpriv->exttrg_users = 0;
 	inl(dev->iobase + PCI9118_INTCTRL);
-	outl(devpriv->IntControlReg, dev->iobase + PCI9118_INTCTRL);	// disable interrupts source
+	outl(devpriv->IntControlReg, dev->iobase + PCI9118_INTCTRL);	/*  disable interrupts source */
 	outl(0x30, dev->iobase + PCI9118_CNTCTRL);
-//        outl(0xb4, dev->iobase + PCI9118_CNTCTRL);
-	start_pacer(dev, 0, 0, 0);	// stop 8254 counters
+/* outl(0xb4, dev->iobase + PCI9118_CNTCTRL); */
+	start_pacer(dev, 0, 0, 0);	/*  stop 8254 counters */
 	devpriv->AdControlReg = 0;
-	outl(devpriv->AdControlReg, dev->iobase + PCI9118_ADCNTRL);	// bipolar, S.E., use 8254, stop 8354, internal trigger, soft trigger, disable INT and DMA
+	outl(devpriv->AdControlReg, dev->iobase + PCI9118_ADCNTRL);	/*  bipolar, S.E., use 8254, stop 8354, internal trigger, soft trigger, disable INT and DMA */
 	outl(0, dev->iobase + PCI9118_BURST);
 	outl(1, dev->iobase + PCI9118_SCANMOD);
-	outl(2, dev->iobase + PCI9118_SCANMOD);	// reset scan queue
+	outl(2, dev->iobase + PCI9118_SCANMOD);	/*  reset scan queue */
 	devpriv->AdFunctionReg = AdFunction_PDTrg | AdFunction_PETrg;
-	outl(devpriv->AdFunctionReg, dev->iobase + PCI9118_ADFUNC);	// positive triggers, no S&H, no burst, burst stop, no post trigger, no about trigger, trigger stop
+	outl(devpriv->AdFunctionReg, dev->iobase + PCI9118_ADFUNC);	/*  positive triggers, no S&H, no burst, burst stop, no post trigger, no about trigger, trigger stop */
 
 	devpriv->ao_data[0] = 2047;
 	devpriv->ao_data[1] = 2047;
-	outl(devpriv->ao_data[0], dev->iobase + PCI9118_DA1);	// reset A/D outs to 0V
+	outl(devpriv->ao_data[0], dev->iobase + PCI9118_DA1);	/*  reset A/D outs to 0V */
 	outl(devpriv->ao_data[1], dev->iobase + PCI9118_DA2);
-	outl(0, dev->iobase + PCI9118_DO);	// reset digi outs to L
-	comedi_udelay(10);
+	outl(0, dev->iobase + PCI9118_DO);	/*  reset digi outs to L */
+	udelay(10);
 	inl(dev->iobase + PCI9118_AD_DATA);
-	outl(0, dev->iobase + PCI9118_DELFIFO);	// flush FIFO
-	outl(0, dev->iobase + PCI9118_INTSRC);	// remove INT requests
-	inl(dev->iobase + PCI9118_ADSTAT);	// flush A/D status register
-	inl(dev->iobase + PCI9118_INTSRC);	// flush INT requests
+	outl(0, dev->iobase + PCI9118_DELFIFO);	/*  flush FIFO */
+	outl(0, dev->iobase + PCI9118_INTSRC);	/*  remove INT requests */
+	inl(dev->iobase + PCI9118_ADSTAT);	/*  flush A/D status register */
+	inl(dev->iobase + PCI9118_INTSRC);	/*  flush INT requests */
 	devpriv->AdControlReg = 0;
-	outl(devpriv->AdControlReg, dev->iobase + PCI9118_ADCNTRL);	// bipolar, S.E., use 8254, stop 8354, internal trigger, soft trigger, disable INT and DMA
+	outl(devpriv->AdControlReg, dev->iobase + PCI9118_ADCNTRL);	/*  bipolar, S.E., use 8254, stop 8354, internal trigger, soft trigger, disable INT and DMA */
 
 	devpriv->cnt0_users = 0;
 	devpriv->exttrg_users = 0;
@@ -1835,7 +1835,7 @@ static int pci9118_reset(struct comedi_device * dev)
 /*
 ==============================================================================
 */
-static int pci9118_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int pci9118_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	int ret, pages, i;
@@ -1848,19 +1848,20 @@ static int pci9118_attach(struct comedi_device * dev, struct comedi_devconfig *
 	unsigned char pci_bus, pci_slot, pci_func;
 	u16 u16w;
 
-	rt_printk("comedi%d: adl_pci9118: board=%s", dev->minor,
+	printk("comedi%d: adl_pci9118: board=%s", dev->minor,
 		this_board->name);
 
 	opt_bus = it->options[0];
 	opt_slot = it->options[1];
 	if (it->options[3] & 1) {
-		master = 0;	// user don't want use bus master
+		master = 0;	/*  user don't want use bus master */
 	} else {
 		master = 1;
 	}
 
-	if ((ret = alloc_private(dev, sizeof(struct pci9118_private))) < 0) {
-		rt_printk(" - Allocation failed!\n");
+	ret = alloc_private(dev, sizeof(struct pci9118_private));
+	if (ret < 0) {
+		printk(" - Allocation failed!\n");
 		return -ENOMEM;
 	}
 
@@ -1889,10 +1890,10 @@ static int pci9118_attach(struct comedi_device * dev, struct comedi_devconfig *
 
 	if (!pcidev) {
 		if (opt_bus || opt_slot) {
-			rt_printk(" - Card at b:s %d:%d %s\n",
+			printk(" - Card at b:s %d:%d %s\n",
 				opt_bus, opt_slot, errstr);
 		} else {
-			rt_printk(" - Card %s\n", errstr);
+			printk(" - Card %s\n", errstr);
 		}
 		return -EIO;
 	}
@@ -1908,7 +1909,7 @@ static int pci9118_attach(struct comedi_device * dev, struct comedi_devconfig *
 	iobase_a = pci_resource_start(pcidev, 0);
 	iobase_9 = pci_resource_start(pcidev, 2);
 
-	rt_printk(", b:s:f=%d:%d:%d, io=0x%4lx, 0x%4lx", pci_bus, pci_slot,
+	printk(", b:s:f=%d:%d:%d, io=0x%4lx, 0x%4lx", pci_bus, pci_slot,
 		pci_func, iobase_9, iobase_a);
 
 	dev->iobase = iobase_9;
@@ -1920,30 +1921,32 @@ static int pci9118_attach(struct comedi_device * dev, struct comedi_devconfig *
 	pci9118_reset(dev);
 
 	if (it->options[3] & 2)
-		irq = 0;	// user don't want use IRQ
+		irq = 0;	/*  user don't want use IRQ */
 	if (irq > 0) {
-		if (comedi_request_irq(irq, interrupt_pci9118, IRQF_SHARED,
+		if (request_irq(irq, interrupt_pci9118, IRQF_SHARED,
 				"ADLink PCI-9118", dev)) {
-			rt_printk(", unable to allocate IRQ %d, DISABLING IT",
+			printk(", unable to allocate IRQ %d, DISABLING IT",
 				irq);
 			irq = 0;	/* Can't use IRQ */
 		} else {
-			rt_printk(", irq=%u", irq);
+			printk(", irq=%u", irq);
 		}
 	} else {
-		rt_printk(", IRQ disabled");
+		printk(", IRQ disabled");
 	}
 
 	dev->irq = irq;
 
-	if (master) {		// alloc DMA buffers
+	if (master) {		/*  alloc DMA buffers */
 		devpriv->dma_doublebuf = 0;
 		for (i = 0; i < 2; i++) {
-			for (pages = 4; pages >= 0; pages--)
-				if ((devpriv->dmabuf_virt[i] = (short *)
-						__get_free_pages(GFP_KERNEL,
-							pages)))
+			for (pages = 4; pages >= 0; pages--) {
+				devpriv->dmabuf_virt[i] =
+					(short *) __get_free_pages(GFP_KERNEL,
+								   pages);
+				if (devpriv->dmabuf_virt[i])
 					break;
+			}
 			if (devpriv->dmabuf_virt[i]) {
 				devpriv->dmabuf_pages[i] = pages;
 				devpriv->dmabuf_size[i] = PAGE_SIZE * pages;
@@ -1955,7 +1958,7 @@ static int pci9118_attach(struct comedi_device * dev, struct comedi_devconfig *
 			}
 		}
 		if (!devpriv->dmabuf_virt[0]) {
-			rt_printk(", Can't allocate DMA buffer, DMA disabled!");
+			printk(", Can't allocate DMA buffer, DMA disabled!");
 			master = 0;
 		}
 
@@ -1964,26 +1967,26 @@ static int pci9118_attach(struct comedi_device * dev, struct comedi_devconfig *
 
 	}
 
-	if ((devpriv->master = master)) {
-		rt_printk(", bus master");
-	} else {
-		rt_printk(", no bus master");
-	}
+	devpriv->master = master;
+	if (devpriv->master)
+		printk(", bus master");
+	else
+		printk(", no bus master");
 
 	devpriv->usemux = 0;
 	if (it->options[2] > 0) {
 		devpriv->usemux = it->options[2];
 		if (devpriv->usemux > 256)
-			devpriv->usemux = 256;	// max 256 channels!
+			devpriv->usemux = 256;	/*  max 256 channels! */
 		if (it->options[4] > 0)
 			if (devpriv->usemux > 128) {
-				devpriv->usemux = 128;	// max 128 channels with softare S&H!
+				devpriv->usemux = 128;	/*  max 128 channels with softare S&H! */
 			}
-		rt_printk(", ext. mux %d channels", devpriv->usemux);
+		printk(", ext. mux %d channels", devpriv->usemux);
 	}
 
 	devpriv->softsshdelay = it->options[4];
-	if (devpriv->softsshdelay < 0) {	// select sample&hold signal polarity
+	if (devpriv->softsshdelay < 0) {	/*  select sample&hold signal polarity */
 		devpriv->softsshdelay = -devpriv->softsshdelay;
 		devpriv->softsshsample = 0x80;
 		devpriv->softsshhold = 0x00;
@@ -1992,12 +1995,13 @@ static int pci9118_attach(struct comedi_device * dev, struct comedi_devconfig *
 		devpriv->softsshhold = 0x80;
 	}
 
-	rt_printk(".\n");
+	printk(".\n");
 
 	pci_read_config_word(devpriv->pcidev, PCI_COMMAND, &u16w);
-	pci_write_config_word(devpriv->pcidev, PCI_COMMAND, u16w | 64);	// Enable parity check for parity error
+	pci_write_config_word(devpriv->pcidev, PCI_COMMAND, u16w | 64);	/*  Enable parity check for parity error */
 
-	if ((ret = alloc_subdevices(dev, 4)) < 0)
+	ret = alloc_subdevices(dev, 4);
+	if (ret < 0)
 		return ret;
 
 	s = dev->subdevices + 0;
@@ -2052,9 +2056,9 @@ static int pci9118_attach(struct comedi_device * dev, struct comedi_devconfig *
 	s->insn_bits = pci9118_insn_bits_do;
 
 	devpriv->valid = 1;
-	devpriv->i8254_osc_base = 250;	// 250ns=4MHz
-	devpriv->ai_maskharderr = 0x10a;	// default measure crash condition
-	if (it->options[5])	// disable some requested
+	devpriv->i8254_osc_base = 250;	/*  250ns=4MHz */
+	devpriv->ai_maskharderr = 0x10a;	/*  default measure crash condition */
+	if (it->options[5])	/*  disable some requested */
 		devpriv->ai_maskharderr &= ~it->options[5];
 
 	switch (this_board->ai_maxdata) {
@@ -2071,13 +2075,13 @@ static int pci9118_attach(struct comedi_device * dev, struct comedi_devconfig *
 /*
 ==============================================================================
 */
-static int pci9118_detach(struct comedi_device * dev)
+static int pci9118_detach(struct comedi_device *dev)
 {
 	if (dev->private) {
 		if (devpriv->valid)
 			pci9118_reset(dev);
 		if (dev->irq)
-			comedi_free_irq(dev->irq, dev);
+			free_irq(dev->irq, dev);
 		if (devpriv->pcidev) {
 			if (dev->iobase) {
 				comedi_pci_disable(devpriv->pcidev);
diff --git a/drivers/staging/comedi/drivers/adq12b.c b/drivers/staging/comedi/drivers/adq12b.c
index 92f62854d6d..d09d1493a8b 100644
--- a/drivers/staging/comedi/drivers/adq12b.c
+++ b/drivers/staging/comedi/drivers/adq12b.c
@@ -81,7 +81,7 @@ If you do not specify any options, they will default to
 
 #include "../comedidev.h"
 
-// address scheme (page 2.17 of the manual)
+/* address scheme (page 2.17 of the manual) */
 #define ADQ12B_SIZE     16
 
 #define ADQ12B_CTREG    0x00
@@ -94,24 +94,24 @@ If you do not specify any options, they will default to
 #define ADQ12B_CONT2    0x0e
 #define ADQ12B_COWORD   0x0f
 
-// mask of the bit at STINR to check end of conversion
+/* mask of the bit at STINR to check end of conversion */
 #define ADQ12B_EOC     0x20
 
 #define TIMEOUT        20
 
-// available ranges through the PGA gains
+/* available ranges through the PGA gains */
 static const struct comedi_lrange range_adq12b_ai_bipolar = { 4, {
-        BIP_RANGE( 5 ),
-        BIP_RANGE( 2 ),
-        BIP_RANGE( 1 ),
-        BIP_RANGE( 0.5 )
+        BIP_RANGE(5),
+        BIP_RANGE(2),
+        BIP_RANGE(1),
+        BIP_RANGE(0.5)
 }};
 
 static const struct comedi_lrange range_adq12b_ai_unipolar = { 4, {
-        UNI_RANGE( 5 ),
-        UNI_RANGE( 2 ),
-        UNI_RANGE( 1 ),
-        UNI_RANGE( 0.5 )
+        UNI_RANGE(5),
+        UNI_RANGE(2),
+        UNI_RANGE(1),
+        UNI_RANGE(0.5)
 }};
 
 
@@ -127,20 +127,20 @@ struct adq12b_board {
 
 static const struct adq12b_board adq12b_boards[] = {
         {
-        name:           "adq12b",
-        ai_se_chans:    16,
-        ai_diff_chans:  8,
-        ai_bits:        12,
-        di_chans:       5,
-        do_chans:       8
+	.name = "adq12b",
+	.ai_se_chans = 16,
+	.ai_diff_chans = 8,
+	.ai_bits = 12,
+	.di_chans = 5,
+	.do_chans = 8
         }
-// potentially, more adq-based deviced will be added
+/* potentially, more adq-based deviced will be added */
 /*,
-        name:           "adq12b",
-        ai_chans:       16,  // this is just for reference, hardcoded again later
-        ai_bits:        12,
-        di_chans:       8,
-        do_chans:       5
+	.name = "adq12b",
+	.ai_chans = 16,  // this is just for reference, hardcoded again later
+	.ai_bits = 12,
+	.di_chans = 8,
+	.do_chans = 5
         }*/
 };
 
@@ -162,7 +162,7 @@ struct adq12b_private {
  * the board, and also about the kernel module that contains
  * the device code.
  */
-static int adq12b_attach(struct comedi_device *dev,struct comedi_devconfig *it);
+static int adq12b_attach(struct comedi_device *dev, struct comedi_devconfig *it);
 static int adq12b_detach(struct comedi_device *dev);
 static struct comedi_driver driver_adq12b={
         driver_name:    "adq12b",
@@ -171,12 +171,12 @@ static struct comedi_driver driver_adq12b={
         detach:         adq12b_detach,
         board_name:     &adq12b_boards[0].name,
         offset:         sizeof(struct adq12b_board),
-        num_names:      sizeof(adq12b_boards) / sizeof(struct adq12b_board),
+        num_names:      ARRAY_SIZE(adq12b_boards),
 };
 
-static int adq12b_ai_rinsn(struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data);
-static int adq12b_di_insn_bits(struct comedi_device *dev,struct comedi_subdevice *s, struct comedi_insn *insn,unsigned int *data);
-static int adq12b_do_insn_bits(struct comedi_device *dev,struct comedi_subdevice *s, struct comedi_insn *insn,unsigned int *data);
+static int adq12b_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data);
+static int adq12b_di_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data);
+static int adq12b_do_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data);
 
 /*
  * Attach is called by the Comedi core to configure the driver
@@ -184,7 +184,7 @@ static int adq12b_do_insn_bits(struct comedi_device *dev,struct comedi_subdevice
  * in the driver structure, dev->board_ptr contains that
  * address.
  */
-static int adq12b_attach(struct comedi_device *dev,struct comedi_devconfig *it)
+static int adq12b_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
         struct comedi_subdevice *s;
         unsigned long iobase;
@@ -194,7 +194,7 @@ static int adq12b_attach(struct comedi_device *dev,struct comedi_devconfig *it)
         unipolar = it->options[1];
         differential = it->options[2];
 
-        printk("comedi%d: adq12b called with options base=0x%03lx, %s and %s\n",dev->minor, iobase, (unipolar==1)?"unipolar":"bipolar", (differential==1)?"differential":"single-ended");
+        printk("comedi%d: adq12b called with options base=0x%03lx, %s and %s\n", dev->minor, iobase, (unipolar==1)?"unipolar":"bipolar", (differential==1) ? "differential" : "single-ended");
 
         /* if no address was specified, try the default 0x300 */
         if (iobase == 0) {
@@ -219,7 +219,7 @@ static int adq12b_attach(struct comedi_device *dev,struct comedi_devconfig *it)
  * Allocate the private structure area.  alloc_private() is a
  * convenient macro defined in comedidev.h.
  */
-        if(alloc_private(dev, sizeof(struct adq12b_private)) < 0)
+        if (alloc_private (dev, sizeof (struct adq12b_private)) < 0)
           return -ENOMEM;
 
 /* fill in devpriv structure */
@@ -236,7 +236,7 @@ static int adq12b_attach(struct comedi_device *dev,struct comedi_devconfig *it)
  * Allocate the subdevice structures.  alloc_subdevice() is a
  * convenient macro defined in comedidev.h.
  */
-        if(alloc_subdevices(dev, 3)<0)
+        if (alloc_subdevices (dev, 3)<0)
            return -ENOMEM;
 
         s = dev->subdevices+0;
@@ -304,7 +304,7 @@ static int adq12b_detach(struct comedi_device *dev)
 
         kfree(devpriv);
 
-        printk("comedi%d: adq12b: removed\n",dev->minor);
+        printk("comedi%d: adq12b: removed\n", dev->minor);
 
         return 0;
 }
@@ -314,7 +314,7 @@ static int adq12b_detach(struct comedi_device *dev)
  * mode.
  */
 
-static int adq12b_ai_rinsn(struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data)
+static int adq12b_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
         int n, i;
         int range, channel;
@@ -325,29 +325,29 @@ static int adq12b_ai_rinsn(struct comedi_device *dev,struct comedi_subdevice *s,
         channel = CR_CHAN(insn->chanspec);
         if (channel != devpriv->last_channel || range != devpriv->last_range) {
           outb((range << 4) | channel, dev->iobase + ADQ12B_CTREG);
-          comedi_udelay(50);   /* wait for the mux to settle */
+          udelay(50);   /* wait for the mux to settle */
         }
 
         /* trigger conversion */
         status = inb(dev->iobase + ADQ12B_ADLOW);
 
         /* convert n samples */
-        for(n=0; n < insn->n; n++){
+        for (n=0; n < insn->n; n++){
 
           /* wait for end of convertion */
 	  i = 0;
           do {
-//            comedi_udelay(1);
+/* udelay(1); */
 	    status = inb(dev->iobase + ADQ12B_STINR);
             status = status & ADQ12B_EOC;
           } while (status == 0 && ++i < TIMEOUT);
-//          } while (++i < 10);
+/* } while (++i < 10); */
 
           /* read data */
           hi = inb(dev->iobase + ADQ12B_ADHIG);
           lo = inb(dev->iobase + ADQ12B_ADLOW);
 
-          //rt_printk("debug: chan=%d range=%d status=%d hi=%d lo=%d\n", channel, range, status,  hi, lo);
+          /* printk("debug: chan=%d range=%d status=%d hi=%d lo=%d\n", channel, range, status,  hi, lo); */
           data[n] = (hi << 8) | lo;
 
         }
@@ -357,7 +357,7 @@ static int adq12b_ai_rinsn(struct comedi_device *dev,struct comedi_subdevice *s,
 }
 
 
-static int adq12b_di_insn_bits(struct comedi_device *dev,struct comedi_subdevice *s, 	struct comedi_insn *insn,unsigned int *data)
+static int adq12b_di_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s, 	struct comedi_insn *insn, unsigned int *data)
 {
 
         /* only bits 0-4 have information about digital inputs */
@@ -367,7 +367,7 @@ static int adq12b_di_insn_bits(struct comedi_device *dev,struct comedi_subdevice
 }
 
 
-static int adq12b_do_insn_bits(struct comedi_device *dev,struct comedi_subdevice *s, 	struct comedi_insn *insn,unsigned int *data)
+static int adq12b_do_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s, 	struct comedi_insn *insn, unsigned int *data)
 {
         int channel;
 
diff --git a/drivers/staging/comedi/drivers/adv_pci1710.c b/drivers/staging/comedi/drivers/adv_pci1710.c
index 29eac743c8e..0b56c14e2d5 100644
--- a/drivers/staging/comedi/drivers/adv_pci1710.c
+++ b/drivers/staging/comedi/drivers/adv_pci1710.c
@@ -41,6 +41,8 @@ Configuration options:
           device will be used.
 */
 
+#include <linux/interrupt.h>
+
 #include "../comedidev.h"
 
 #include "comedi_pci.h"
@@ -56,12 +58,12 @@ Configuration options:
 
 #undef DPRINTK
 #ifdef PCI171X_EXTDEBUG
-#define DPRINTK(fmt, args...) rt_printk(fmt, ## args)
+#define DPRINTK(fmt, args...) printk(fmt, ## args)
 #else
 #define DPRINTK(fmt, args...)
 #endif
 
-// hardware types of the cards
+/* hardware types of the cards */
 #define TYPE_PCI171X	0
 #define TYPE_PCI1713	2
 #define TYPE_PCI1720	3
@@ -87,12 +89,12 @@ Configuration options:
 #define PCI171x_CNT2	28	/* R/W: 8254 couter 2 */
 #define PCI171x_CNTCTRL	30	/* W:   8254 counter control */
 
-// upper bits from status register (PCI171x_STATUS) (lower is same woth control reg)
+/* upper bits from status register (PCI171x_STATUS) (lower is same woth control reg) */
 #define	Status_FE	0x0100	/* 1=FIFO is empty */
 #define Status_FH	0x0200	/* 1=FIFO is half full */
 #define Status_FF	0x0400	/* 1=FIFO is full, fatal error */
 #define Status_IRQ	0x0800	/* 1=IRQ occured */
-// bits from control register (PCI171x_CONTROL)
+/* bits from control register (PCI171x_CONTROL) */
 #define Control_CNT0	0x0040	/* 1=CNT0 have external source, 0=have internal 100kHz source */
 #define Control_ONEFH	0x0020	/* 1=IRQ on FIFO is half full, 0=every sample */
 #define Control_IRQEN	0x0010	/* 1=enable IRQ */
@@ -100,7 +102,7 @@ Configuration options:
 #define Control_EXT	0x0004	/* 1=external trigger source */
 #define Control_PACER	0x0002	/* 1=enable internal 8254 trigger source */
 #define Control_SW	0x0001	/* 1=enable software trigger source */
-// bits from counter control register (PCI171x_CNTCTRL)
+/* bits from counter control register (PCI171x_CNTCTRL) */
 #define Counter_BCD     0x0001	/* 0 = binary counter, 1 = BCD counter */
 #define Counter_M0      0x0002	/* M0-M2 select modes 0-5 */
 #define Counter_M1      0x0004	/* 000 = mode 0, 010 = mode 2 ... */
@@ -118,7 +120,7 @@ Configuration options:
 #define PCI1720_SYNCOUT	 9	/* W:   D/A synchronized output register */
 #define PCI1720_SYNCONT	15	/* R/W: D/A synchronized control */
 
-// D/A synchronized control (PCI1720_SYNCONT)
+/* D/A synchronized control (PCI1720_SYNCONT) */
 #define Syncont_SC0	 1	/* set synchronous output mode */
 
 static const struct comedi_lrange range_pci1710_3 = { 9, {
@@ -182,28 +184,28 @@ static const struct comedi_lrange range_pci171x_da = { 2, {
 	}
 };
 
-static int pci1710_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int pci1710_detach(struct comedi_device * dev);
+static int pci1710_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int pci1710_detach(struct comedi_device *dev);
 
 struct boardtype {
-	const char *name;	// board name
+	const char *name;	/*  board name */
 	int device_id;
-	int iorange;		// I/O range len
-	char have_irq;		// 1=card support IRQ
-	char cardtype;		// 0=1710& co. 2=1713, ...
-	int n_aichan;		// num of A/D chans
-	int n_aichand;		// num of A/D chans in diff mode
-	int n_aochan;		// num of D/A chans
-	int n_dichan;		// num of DI chans
-	int n_dochan;		// num of DO chans
-	int n_counter;		// num of counters
-	int ai_maxdata;		// resolution of A/D
-	int ao_maxdata;		// resolution of D/A
-	const struct comedi_lrange *rangelist_ai;	// rangelist for A/D
-	const char *rangecode_ai;	// range codes for programming
-	const struct comedi_lrange *rangelist_ao;	// rangelist for D/A
-	unsigned int ai_ns_min;	// max sample speed of card v ns
-	unsigned int fifo_half_size;	// size of FIFO/2
+	int iorange;		/*  I/O range len */
+	char have_irq;		/*  1=card support IRQ */
+	char cardtype;		/*  0=1710& co. 2=1713, ... */
+	int n_aichan;		/*  num of A/D chans */
+	int n_aichand;		/*  num of A/D chans in diff mode */
+	int n_aochan;		/*  num of D/A chans */
+	int n_dichan;		/*  num of DI chans */
+	int n_dochan;		/*  num of DO chans */
+	int n_counter;		/*  num of counters */
+	int ai_maxdata;		/*  resolution of A/D */
+	int ao_maxdata;		/*  resolution of D/A */
+	const struct comedi_lrange *rangelist_ai;	/*  rangelist for A/D */
+	const char *rangecode_ai;	/*  range codes for programming */
+	const struct comedi_lrange *rangelist_ao;	/*  rangelist for D/A */
+	unsigned int ai_ns_min;	/*  max sample speed of card v ns */
+	unsigned int fifo_half_size;	/*  size of FIFO/2 */
 };
 
 static DEFINE_PCI_DEVICE_TABLE(pci1710_pci_table) = {
@@ -250,7 +252,7 @@ static const struct boardtype boardtypes[] = {
 		16, 0, 0, 16, 16, 0, 0x0fff, 0x0000,
 		&range_pci17x1, range_codes_pci17x1, NULL,
 		10000, 512},
-	// dummy entry corresponding to driver name
+	/*  dummy entry corresponding to driver name */
 	{.name = DRV_NAME},
 };
 
@@ -267,34 +269,34 @@ static struct comedi_driver driver_pci1710 = {
 };
 
 struct pci1710_private {
-	struct pci_dev *pcidev;	// ptr to PCI device
-	char valid;		// card is usable
-	char neverending_ai;	// we do unlimited AI
-	unsigned int CntrlReg;	// Control register
-	unsigned int i8254_osc_base;	// frequence of onboard oscilator
-	unsigned int ai_do;	// what do AI? 0=nothing, 1 to 4 mode
-	unsigned int ai_act_scan;	// how many scans we finished
-	unsigned int ai_act_chan;	// actual position in actual scan
-	unsigned int ai_buf_ptr;	// data buffer ptr in samples
-	unsigned char ai_eos;	// 1=EOS wake up
+	struct pci_dev *pcidev;	/*  ptr to PCI device */
+	char valid;		/*  card is usable */
+	char neverending_ai;	/*  we do unlimited AI */
+	unsigned int CntrlReg;	/*  Control register */
+	unsigned int i8254_osc_base;	/*  frequence of onboard oscilator */
+	unsigned int ai_do;	/*  what do AI? 0=nothing, 1 to 4 mode */
+	unsigned int ai_act_scan;	/*  how many scans we finished */
+	unsigned int ai_act_chan;	/*  actual position in actual scan */
+	unsigned int ai_buf_ptr;	/*  data buffer ptr in samples */
+	unsigned char ai_eos;	/*  1=EOS wake up */
 	unsigned char ai_et;
 	unsigned int ai_et_CntrlReg;
 	unsigned int ai_et_MuxVal;
 	unsigned int ai_et_div1, ai_et_div2;
-	unsigned int act_chanlist[32];	// list of scaned channel
-	unsigned char act_chanlist_len;	// len of scanlist
-	unsigned char act_chanlist_pos;	// actual position in MUX list
-	unsigned char da_ranges;	// copy of D/A outpit range register
-	unsigned int ai_scans;	// len of scanlist
-	unsigned int ai_n_chan;	// how many channels is measured
-	unsigned int *ai_chanlist;	// actaul chanlist
-	unsigned int ai_flags;	// flaglist
-	unsigned int ai_data_len;	// len of data buffer
-	short *ai_data;	// data buffer
-	unsigned int ai_timer1;	// timers
+	unsigned int act_chanlist[32];	/*  list of scaned channel */
+	unsigned char act_chanlist_len;	/*  len of scanlist */
+	unsigned char act_chanlist_pos;	/*  actual position in MUX list */
+	unsigned char da_ranges;	/*  copy of D/A outpit range register */
+	unsigned int ai_scans;	/*  len of scanlist */
+	unsigned int ai_n_chan;	/*  how many channels is measured */
+	unsigned int *ai_chanlist;	/*  actaul chanlist */
+	unsigned int ai_flags;	/*  flaglist */
+	unsigned int ai_data_len;	/*  len of data buffer */
+	short *ai_data;	/*  data buffer */
+	unsigned int ai_timer1;	/*  timers */
 	unsigned int ai_timer2;
-	short ao_data[4];	// data output buffer
-	unsigned int cnt0_write_wait;	// after a write, wait for update of the internal state
+	short ao_data[4];	/*  data output buffer */
+	unsigned int cnt0_write_wait;	/*  after a write, wait for update of the internal state */
 };
 
 #define devpriv ((struct pci1710_private *)dev->private)
@@ -304,16 +306,16 @@ struct pci1710_private {
 ==============================================================================
 */
 
-static int check_channel_list(struct comedi_device * dev, struct comedi_subdevice * s,
+static int check_channel_list(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int *chanlist, unsigned int n_chan);
-static void setup_channel_list(struct comedi_device * dev, struct comedi_subdevice * s,
+static void setup_channel_list(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int *chanlist, unsigned int n_chan, unsigned int seglen);
-static void start_pacer(struct comedi_device * dev, int mode, unsigned int divisor1,
+static void start_pacer(struct comedi_device *dev, int mode, unsigned int divisor1,
 	unsigned int divisor2);
-static int pci1710_reset(struct comedi_device * dev);
-static int pci171x_ai_cancel(struct comedi_device * dev, struct comedi_subdevice * s);
+static int pci1710_reset(struct comedi_device *dev);
+static int pci171x_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
 
-static const unsigned int muxonechan[] = { 0x0000, 0x0101, 0x0202, 0x0303, 0x0404, 0x0505, 0x0606, 0x0707,	// used for gain list programming
+static const unsigned int muxonechan[] = { 0x0000, 0x0101, 0x0202, 0x0303, 0x0404, 0x0505, 0x0606, 0x0707,	/*  used for gain list programming */
 	0x0808, 0x0909, 0x0a0a, 0x0b0b, 0x0c0c, 0x0d0d, 0x0e0e, 0x0f0f,
 	0x1010, 0x1111, 0x1212, 0x1313, 0x1414, 0x1515, 0x1616, 0x1717,
 	0x1818, 0x1919, 0x1a1a, 0x1b1b, 0x1c1c, 0x1d1d, 0x1e1e, 0x1f1f
@@ -322,8 +324,8 @@ static const unsigned int muxonechan[] = { 0x0000, 0x0101, 0x0202, 0x0303, 0x040
 /*
 ==============================================================================
 */
-static int pci171x_insn_read_ai(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci171x_insn_read_ai(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n, timeout;
 #ifdef PCI171x_PARANOIDCHECK
@@ -332,7 +334,7 @@ static int pci171x_insn_read_ai(struct comedi_device * dev, struct comedi_subdev
 
 	DPRINTK("adv_pci1710 EDBG: BGN: pci171x_insn_read_ai(...)\n");
 	devpriv->CntrlReg &= Control_CNT0;
-	devpriv->CntrlReg |= Control_SW;	// set software trigger
+	devpriv->CntrlReg |= Control_SW;	/*  set software trigger */
 	outw(devpriv->CntrlReg, dev->iobase + PCI171x_CONTROL);
 	outb(0, dev->iobase + PCI171x_CLRFIFO);
 	outb(0, dev->iobase + PCI171x_CLRINT);
@@ -346,7 +348,7 @@ static int pci171x_insn_read_ai(struct comedi_device * dev, struct comedi_subdev
 		outw(0, dev->iobase + PCI171x_SOFTTRG);	/* start conversion */
 		DPRINTK("adv_pci1710 B n=%d ST=%4x\n", n,
 			inw(dev->iobase + PCI171x_STATUS));
-		//comedi_udelay(1);
+		/* udelay(1); */
 		DPRINTK("adv_pci1710 C n=%d ST=%4x\n", n,
 			inw(dev->iobase + PCI171x_STATUS));
 		timeout = 100;
@@ -390,8 +392,8 @@ static int pci171x_insn_read_ai(struct comedi_device * dev, struct comedi_subdev
 /*
 ==============================================================================
 */
-static int pci171x_insn_write_ao(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci171x_insn_write_ao(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n, chan, range, ofs;
 
@@ -421,8 +423,8 @@ static int pci171x_insn_write_ao(struct comedi_device * dev, struct comedi_subde
 /*
 ==============================================================================
 */
-static int pci171x_insn_read_ao(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci171x_insn_read_ao(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n, chan;
 
@@ -436,8 +438,8 @@ static int pci171x_insn_read_ao(struct comedi_device * dev, struct comedi_subdev
 /*
 ==============================================================================
 */
-static int pci171x_insn_bits_di(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci171x_insn_bits_di(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	data[1] = inw(dev->iobase + PCI171x_DI);
 
@@ -447,8 +449,8 @@ static int pci171x_insn_bits_di(struct comedi_device * dev, struct comedi_subdev
 /*
 ==============================================================================
 */
-static int pci171x_insn_bits_do(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci171x_insn_bits_do(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (data[0]) {
 		s->state &= ~data[0];
@@ -463,8 +465,8 @@ static int pci171x_insn_bits_do(struct comedi_device * dev, struct comedi_subdev
 /*
 ==============================================================================
 */
-static int pci171x_insn_counter_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci171x_insn_counter_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int msb, lsb, ccntrl;
 	int i;
@@ -485,8 +487,8 @@ static int pci171x_insn_counter_read(struct comedi_device * dev, struct comedi_s
 /*
 ==============================================================================
 */
-static int pci171x_insn_counter_write(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci171x_insn_counter_write(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	uint msb, lsb, ccntrl, status;
 
@@ -512,8 +514,8 @@ static int pci171x_insn_counter_write(struct comedi_device * dev, struct comedi_
 /*
 ==============================================================================
 */
-static int pci171x_insn_counter_config(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+static int pci171x_insn_counter_config(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 #ifdef unused
 	/* This doesn't work like a normal Comedi counter config */
@@ -548,8 +550,8 @@ static int pci171x_insn_counter_config(struct comedi_device * dev,
 /*
 ==============================================================================
 */
-static int pci1720_insn_write_ao(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci1720_insn_write_ao(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n, rangereg, chan;
 
@@ -563,7 +565,7 @@ static int pci1720_insn_write_ao(struct comedi_device * dev, struct comedi_subde
 
 	for (n = 0; n < insn->n; n++) {
 		outw(data[n], dev->iobase + PCI1720_DA0 + (chan << 1));
-		outb(0, dev->iobase + PCI1720_SYNCOUT);	// update outputs
+		outb(0, dev->iobase + PCI1720_SYNCOUT);	/*  update outputs */
 	}
 
 	devpriv->ao_data[chan] = data[n];
@@ -586,14 +588,14 @@ static void interrupt_pci1710_every_sample(void *d)
 	DPRINTK("adv_pci1710 EDBG: BGN: interrupt_pci1710_every_sample(...)\n");
 	m = inw(dev->iobase + PCI171x_STATUS);
 	if (m & Status_FE) {
-		rt_printk("comedi%d: A/D FIFO empty (%4x)\n", dev->minor, m);
+		printk("comedi%d: A/D FIFO empty (%4x)\n", dev->minor, m);
 		pci171x_ai_cancel(dev, s);
 		s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
 		comedi_event(dev, s);
 		return;
 	}
 	if (m & Status_FF) {
-		rt_printk
+		printk
 			("comedi%d: A/D FIFO Full status (Fatal Error!) (%4x)\n",
 			dev->minor, m);
 		pci171x_ai_cancel(dev, s);
@@ -602,7 +604,7 @@ static void interrupt_pci1710_every_sample(void *d)
 		return;
 	}
 
-	outb(0, dev->iobase + PCI171x_CLRINT);	// clear our INT request
+	outb(0, dev->iobase + PCI171x_CLRINT);	/*  clear our INT request */
 
 	DPRINTK("FOR ");
 	for (; !(inw(dev->iobase + PCI171x_STATUS) & Status_FE);) {
@@ -612,7 +614,7 @@ static void interrupt_pci1710_every_sample(void *d)
 		if (this_board->cardtype != TYPE_PCI1713)
 			if ((sampl & 0xf000) !=
 				devpriv->act_chanlist[s->async->cur_chan]) {
-				rt_printk
+				printk
 					("comedi: A/D data dropout: received data from channel %d, expected %d!\n",
 					(sampl & 0xf000) >> 12,
 					(devpriv->act_chanlist[s->async->
@@ -637,11 +639,11 @@ static void interrupt_pci1710_every_sample(void *d)
 			s->async->cur_chan = 0;
 		}
 
-		if (s->async->cur_chan == 0) {	// one scan done
+		if (s->async->cur_chan == 0) {	/*  one scan done */
 			devpriv->ai_act_scan++;
 			DPRINTK("adv_pci1710 EDBG: EOS1 bic %d bip %d buc %d bup %d\n", s->async->buf_int_count, s->async->buf_int_ptr, s->async->buf_user_count, s->async->buf_user_ptr);
 			DPRINTK("adv_pci1710 EDBG: EOS2\n");
-			if ((!devpriv->neverending_ai) && (devpriv->ai_act_scan >= devpriv->ai_scans)) {	// all data sampled
+			if ((!devpriv->neverending_ai) && (devpriv->ai_act_scan >= devpriv->ai_scans)) {	/*  all data sampled */
 				pci171x_ai_cancel(dev, s);
 				s->async->events |= COMEDI_CB_EOA;
 				comedi_event(dev, s);
@@ -650,7 +652,7 @@ static void interrupt_pci1710_every_sample(void *d)
 		}
 	}
 
-	outb(0, dev->iobase + PCI171x_CLRINT);	// clear our INT request
+	outb(0, dev->iobase + PCI171x_CLRINT);	/*  clear our INT request */
 	DPRINTK("adv_pci1710 EDBG: END: interrupt_pci1710_every_sample(...)\n");
 
 	comedi_event(dev, s);
@@ -659,7 +661,7 @@ static void interrupt_pci1710_every_sample(void *d)
 /*
 ==============================================================================
 */
-static int move_block_from_fifo(struct comedi_device * dev, struct comedi_subdevice * s,
+static int move_block_from_fifo(struct comedi_device *dev, struct comedi_subdevice *s,
 	int n, int turn)
 {
 	int i, j;
@@ -674,7 +676,7 @@ static int move_block_from_fifo(struct comedi_device * dev, struct comedi_subdev
 		sampl = inw(dev->iobase + PCI171x_AD_DATA);
 		if (this_board->cardtype != TYPE_PCI1713)
 			if ((sampl & 0xf000) != devpriv->act_chanlist[j]) {
-				rt_printk
+				printk
 					("comedi%d: A/D  FIFO data dropout: received data from channel %d, expected %d! (%d/%d/%d/%d/%d/%4x)\n",
 					dev->minor, (sampl & 0xf000) >> 12,
 					(devpriv->
@@ -714,7 +716,7 @@ static void interrupt_pci1710_half_fifo(void *d)
 	DPRINTK("adv_pci1710 EDBG: BGN: interrupt_pci1710_half_fifo(...)\n");
 	m = inw(dev->iobase + PCI171x_STATUS);
 	if (!(m & Status_FH)) {
-		rt_printk("comedi%d: A/D FIFO not half full! (%4x)\n",
+		printk("comedi%d: A/D FIFO not half full! (%4x)\n",
 			dev->minor, m);
 		pci171x_ai_cancel(dev, s);
 		s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
@@ -722,7 +724,7 @@ static void interrupt_pci1710_half_fifo(void *d)
 		return;
 	}
 	if (m & Status_FF) {
-		rt_printk
+		printk
 			("comedi%d: A/D FIFO Full status (Fatal Error!) (%4x)\n",
 			dev->minor, m);
 		pci171x_ai_cancel(dev, s);
@@ -751,7 +753,7 @@ static void interrupt_pci1710_half_fifo(void *d)
 			comedi_event(dev, s);
 			return;
 		}
-	outb(0, dev->iobase + PCI171x_CLRINT);	// clear our INT request
+	outb(0, dev->iobase + PCI171x_CLRINT);	/*  clear our INT request */
 	DPRINTK("adv_pci1710 EDBG: END: interrupt_pci1710_half_fifo(...)\n");
 
 	comedi_event(dev, s);
@@ -760,36 +762,36 @@ static void interrupt_pci1710_half_fifo(void *d)
 /*
 ==============================================================================
 */
-static irqreturn_t interrupt_service_pci1710(int irq, void *d PT_REGS_ARG)
+static irqreturn_t interrupt_service_pci1710(int irq, void *d)
 {
 	struct comedi_device *dev = d;
 
 	DPRINTK("adv_pci1710 EDBG: BGN: interrupt_service_pci1710(%d,...)\n",
 		irq);
-	if (!dev->attached)	// is device attached?
-		return IRQ_NONE;	// no, exit
+	if (!dev->attached)	/*  is device attached? */
+		return IRQ_NONE;	/*  no, exit */
 
-	if (!(inw(dev->iobase + PCI171x_STATUS) & Status_IRQ))	// is this interrupt from our board?
-		return IRQ_NONE;	// no, exit
+	if (!(inw(dev->iobase + PCI171x_STATUS) & Status_IRQ))	/*  is this interrupt from our board? */
+		return IRQ_NONE;	/*  no, exit */
 
 	DPRINTK("adv_pci1710 EDBG: interrupt_service_pci1710() ST: %4x\n",
 		inw(dev->iobase + PCI171x_STATUS));
 
-	if (devpriv->ai_et) {	// Switch from initial TRIG_EXT to TRIG_xxx.
+	if (devpriv->ai_et) {	/*  Switch from initial TRIG_EXT to TRIG_xxx. */
 		devpriv->ai_et = 0;
 		devpriv->CntrlReg &= Control_CNT0;
-		devpriv->CntrlReg |= Control_SW;	// set software trigger
+		devpriv->CntrlReg |= Control_SW;	/*  set software trigger */
 		outw(devpriv->CntrlReg, dev->iobase + PCI171x_CONTROL);
 		devpriv->CntrlReg = devpriv->ai_et_CntrlReg;
 		outb(0, dev->iobase + PCI171x_CLRFIFO);
 		outb(0, dev->iobase + PCI171x_CLRINT);
 		outw(devpriv->ai_et_MuxVal, dev->iobase + PCI171x_MUX);
 		outw(devpriv->CntrlReg, dev->iobase + PCI171x_CONTROL);
-		// start pacer
+		/*  start pacer */
 		start_pacer(dev, 1, devpriv->ai_et_div1, devpriv->ai_et_div2);
 		return IRQ_HANDLED;
 	}
-	if (devpriv->ai_eos) {	// We use FIFO half full INT or not?
+	if (devpriv->ai_eos) {	/*  We use FIFO half full INT or not? */
 		interrupt_pci1710_every_sample(d);
 	} else {
 		interrupt_pci1710_half_fifo(d);
@@ -801,15 +803,15 @@ static irqreturn_t interrupt_service_pci1710(int irq, void *d PT_REGS_ARG)
 /*
 ==============================================================================
 */
-static int pci171x_ai_docmd_and_mode(int mode, struct comedi_device * dev,
-	struct comedi_subdevice * s)
+static int pci171x_ai_docmd_and_mode(int mode, struct comedi_device *dev,
+	struct comedi_subdevice *s)
 {
 	unsigned int divisor1, divisor2;
 	unsigned int seglen;
 
 	DPRINTK("adv_pci1710 EDBG: BGN: pci171x_ai_docmd_and_mode(%d,...)\n",
 		mode);
-	start_pacer(dev, -1, 0, 0);	// stop pacer
+	start_pacer(dev, -1, 0, 0);	/*  stop pacer */
 
 	seglen = check_channel_list(dev, s, devpriv->ai_chanlist,
 		devpriv->ai_n_chan);
@@ -829,7 +831,7 @@ static int pci171x_ai_docmd_and_mode(int mode, struct comedi_device * dev,
 	devpriv->neverending_ai = 0;
 
 	devpriv->CntrlReg &= Control_CNT0;
-	if ((devpriv->ai_flags & TRIG_WAKE_EOS)) {	// don't we want wake up every scan?            devpriv->ai_eos=1;
+	if ((devpriv->ai_flags & TRIG_WAKE_EOS)) {	/*  don't we want wake up every scan?            devpriv->ai_eos=1; */
 		devpriv->ai_eos = 1;
 	} else {
 		devpriv->CntrlReg |= Control_ONEFH;
@@ -838,7 +840,7 @@ static int pci171x_ai_docmd_and_mode(int mode, struct comedi_device * dev,
 
 	if ((devpriv->ai_scans == 0) || (devpriv->ai_scans == -1)) {
 		devpriv->neverending_ai = 1;
-	}			//well, user want neverending
+	}			/* well, user want neverending */
 	else {
 		devpriv->neverending_ai = 0;
 	}
@@ -863,7 +865,7 @@ static int pci171x_ai_docmd_and_mode(int mode, struct comedi_device * dev,
 		DPRINTK("adv_pci1710 EDBG: OSC base=%u div1=%u div2=%u timer=%u\n", devpriv->i8254_osc_base, divisor1, divisor2, devpriv->ai_timer1);
 		outw(devpriv->CntrlReg, dev->iobase + PCI171x_CONTROL);
 		if (mode != 2) {
-			// start pacer
+			/*  start pacer */
 			start_pacer(dev, mode, divisor1, divisor2);
 		} else {
 			devpriv->ai_et_div1 = divisor1;
@@ -884,15 +886,15 @@ static int pci171x_ai_docmd_and_mode(int mode, struct comedi_device * dev,
 /*
 ==============================================================================
 */
-static void pci171x_cmdtest_out(int e, struct comedi_cmd * cmd)
+static void pci171x_cmdtest_out(int e, struct comedi_cmd *cmd)
 {
-	rt_printk("adv_pci1710 e=%d startsrc=%x scansrc=%x convsrc=%x\n", e,
+	printk("adv_pci1710 e=%d startsrc=%x scansrc=%x convsrc=%x\n", e,
 		cmd->start_src, cmd->scan_begin_src, cmd->convert_src);
-	rt_printk("adv_pci1710 e=%d startarg=%d scanarg=%d convarg=%d\n", e,
+	printk("adv_pci1710 e=%d startarg=%d scanarg=%d convarg=%d\n", e,
 		cmd->start_arg, cmd->scan_begin_arg, cmd->convert_arg);
-	rt_printk("adv_pci1710 e=%d stopsrc=%x scanend=%x\n", e, cmd->stop_src,
+	printk("adv_pci1710 e=%d stopsrc=%x scanend=%x\n", e, cmd->stop_src,
 		cmd->scan_end_src);
-	rt_printk("adv_pci1710 e=%d stoparg=%d scanendarg=%d chanlistlen=%d\n",
+	printk("adv_pci1710 e=%d stoparg=%d scanendarg=%d chanlistlen=%d\n",
 		e, cmd->stop_arg, cmd->scan_end_arg, cmd->chanlist_len);
 }
 #endif
@@ -900,8 +902,8 @@ static void pci171x_cmdtest_out(int e, struct comedi_cmd * cmd)
 /*
 ==============================================================================
 */
-static int pci171x_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int pci171x_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	int tmp, divisor1, divisor2;
@@ -1055,7 +1057,7 @@ static int pci171x_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevic
 	if (cmd->chanlist) {
 		if (!check_channel_list(dev, s, cmd->chanlist,
 				cmd->chanlist_len))
-			return 5;	// incorrect channels list
+			return 5;	/*  incorrect channels list */
 	}
 
 	DPRINTK("adv_pci1710 EDBG: BGN: pci171x_ai_cmdtest(...) ret=0\n");
@@ -1065,7 +1067,7 @@ static int pci171x_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevic
 /*
 ==============================================================================
 */
-static int pci171x_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pci171x_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct comedi_cmd *cmd = &s->async->cmd;
 
@@ -1084,13 +1086,13 @@ static int pci171x_ai_cmd(struct comedi_device * dev, struct comedi_subdevice *
 		devpriv->ai_scans = 0;
 	}
 
-	if (cmd->scan_begin_src == TRIG_FOLLOW) {	// mode 1, 2, 3
-		if (cmd->convert_src == TRIG_TIMER) {	// mode 1 and 2
+	if (cmd->scan_begin_src == TRIG_FOLLOW) {	/*  mode 1, 2, 3 */
+		if (cmd->convert_src == TRIG_TIMER) {	/*  mode 1 and 2 */
 			devpriv->ai_timer1 = cmd->convert_arg;
 			return pci171x_ai_docmd_and_mode(cmd->start_src ==
 				TRIG_EXT ? 2 : 1, dev, s);
 		}
-		if (cmd->convert_src == TRIG_EXT) {	// mode 3
+		if (cmd->convert_src == TRIG_EXT) {	/*  mode 3 */
 			return pci171x_ai_docmd_and_mode(3, dev, s);
 		}
 	}
@@ -1104,7 +1106,7 @@ static int pci171x_ai_cmd(struct comedi_device * dev, struct comedi_subdevice *
  If it's ok, then program scan/gain logic.
  This works for all cards.
 */
-static int check_channel_list(struct comedi_device * dev, struct comedi_subdevice * s,
+static int check_channel_list(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int *chanlist, unsigned int n_chan)
 {
 	unsigned int chansegment[32];
@@ -1118,12 +1120,12 @@ static int check_channel_list(struct comedi_device * dev, struct comedi_subdevic
 	}
 
 	if (n_chan > 1) {
-		chansegment[0] = chanlist[0];	// first channel is everytime ok
-		for (i = 1, seglen = 1; i < n_chan; i++, seglen++) {	// build part of chanlist
-			// rt_printk("%d. %d %d\n",i,CR_CHAN(chanlist[i]),CR_RANGE(chanlist[i]));
+		chansegment[0] = chanlist[0];	/*  first channel is everytime ok */
+		for (i = 1, seglen = 1; i < n_chan; i++, seglen++) {	/*  build part of chanlist */
+			/*  printk("%d. %d %d\n",i,CR_CHAN(chanlist[i]),CR_RANGE(chanlist[i])); */
 			if (chanlist[0] == chanlist[i])
-				break;	// we detect loop, this must by finish
-			if (CR_CHAN(chanlist[i]) & 1)	// odd channel cann't by differencial
+				break;	/*  we detect loop, this must by finish */
+			if (CR_CHAN(chanlist[i]) & 1)	/*  odd channel cann't by differencial */
 				if (CR_AREF(chanlist[i]) == AREF_DIFF) {
 					comedi_error(dev,
 						"Odd channel can't be differential input!\n");
@@ -1133,20 +1135,20 @@ static int check_channel_list(struct comedi_device * dev, struct comedi_subdevic
 				(CR_CHAN(chansegment[i - 1]) + 1) % s->n_chan;
 			if (CR_AREF(chansegment[i - 1]) == AREF_DIFF)
 				nowmustbechan = (nowmustbechan + 1) % s->n_chan;
-			if (nowmustbechan != CR_CHAN(chanlist[i])) {	// channel list isn't continous :-(
-				rt_printk
+			if (nowmustbechan != CR_CHAN(chanlist[i])) {	/*  channel list isn't continous :-( */
+				printk
 					("channel list must be continous! chanlist[%i]=%d but must be %d or %d!\n",
 					i, CR_CHAN(chanlist[i]), nowmustbechan,
 					CR_CHAN(chanlist[0]));
 				return 0;
 			}
-			chansegment[i] = chanlist[i];	// well, this is next correct channel in list
+			chansegment[i] = chanlist[i];	/*  well, this is next correct channel in list */
 		}
 
-		for (i = 0, segpos = 0; i < n_chan; i++) {	// check whole chanlist
-			//rt_printk("%d %d=%d %d\n",CR_CHAN(chansegment[i%seglen]),CR_RANGE(chansegment[i%seglen]),CR_CHAN(chanlist[i]),CR_RANGE(chanlist[i]));
+		for (i = 0, segpos = 0; i < n_chan; i++) {	/*  check whole chanlist */
+			/* printk("%d %d=%d %d\n",CR_CHAN(chansegment[i%seglen]),CR_RANGE(chansegment[i%seglen]),CR_CHAN(chanlist[i]),CR_RANGE(chanlist[i])); */
 			if (chanlist[i] != chansegment[i % seglen]) {
-				rt_printk
+				printk
 					("bad channel, reference or range number! chanlist[%i]=%d,%d,%d and not %d,%d,%d!\n",
 					i, CR_CHAN(chansegment[i]),
 					CR_RANGE(chansegment[i]),
@@ -1154,7 +1156,7 @@ static int check_channel_list(struct comedi_device * dev, struct comedi_subdevic
 					CR_CHAN(chanlist[i % seglen]),
 					CR_RANGE(chanlist[i % seglen]),
 					CR_AREF(chansegment[i % seglen]));
-				return 0;	// chan/gain list is strange
+				return 0;	/*  chan/gain list is strange */
 			}
 		}
 	} else {
@@ -1163,7 +1165,7 @@ static int check_channel_list(struct comedi_device * dev, struct comedi_subdevic
 	return seglen;
 }
 
-static void setup_channel_list(struct comedi_device * dev, struct comedi_subdevice * s,
+static void setup_channel_list(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int *chanlist, unsigned int n_chan, unsigned int seglen)
 {
 	unsigned int i, range, chanprog;
@@ -1174,7 +1176,7 @@ static void setup_channel_list(struct comedi_device * dev, struct comedi_subdevi
 	devpriv->act_chanlist_pos = 0;
 
 	DPRINTK("SegLen: %d\n", seglen);
-	for (i = 0; i < seglen; i++) {	// store range list to card
+	for (i = 0; i < seglen; i++) {	/*  store range list to card */
 		chanprog = muxonechan[CR_CHAN(chanlist[i])];
 		outw(chanprog, dev->iobase + PCI171x_MUX);	/* select channel */
 		range = this_board->rangecode_ai[CR_RANGE(chanlist[i])];
@@ -1200,7 +1202,7 @@ static void setup_channel_list(struct comedi_device * dev, struct comedi_subdevi
 /*
 ==============================================================================
 */
-static void start_pacer(struct comedi_device * dev, int mode, unsigned int divisor1,
+static void start_pacer(struct comedi_device *dev, int mode, unsigned int divisor1,
 	unsigned int divisor2)
 {
 	DPRINTK("adv_pci1710 EDBG: BGN: start_pacer(%d,%u,%u)\n", mode,
@@ -1220,7 +1222,7 @@ static void start_pacer(struct comedi_device * dev, int mode, unsigned int divis
 /*
 ==============================================================================
 */
-static int pci171x_ai_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pci171x_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	DPRINTK("adv_pci1710 EDBG: BGN: pci171x_ai_cancel(...)\n");
 
@@ -1229,7 +1231,7 @@ static int pci171x_ai_cancel(struct comedi_device * dev, struct comedi_subdevice
 		devpriv->CntrlReg &= Control_CNT0;
 		devpriv->CntrlReg |= Control_SW;
 
-		outw(devpriv->CntrlReg, dev->iobase + PCI171x_CONTROL);	// reset any operations
+		outw(devpriv->CntrlReg, dev->iobase + PCI171x_CONTROL);	/*  reset any operations */
 		start_pacer(dev, -1, 0, 0);
 		outb(0, dev->iobase + PCI171x_CLRFIFO);
 		outb(0, dev->iobase + PCI171x_CLRINT);
@@ -1249,28 +1251,28 @@ static int pci171x_ai_cancel(struct comedi_device * dev, struct comedi_subdevice
 /*
 ==============================================================================
 */
-static int pci171x_reset(struct comedi_device * dev)
+static int pci171x_reset(struct comedi_device *dev)
 {
 	DPRINTK("adv_pci1710 EDBG: BGN: pci171x_reset(...)\n");
 	outw(0x30, dev->iobase + PCI171x_CNTCTRL);
-	devpriv->CntrlReg = Control_SW | Control_CNT0;	// Software trigger, CNT0=external
-	outw(devpriv->CntrlReg, dev->iobase + PCI171x_CONTROL);	// reset any operations
-	outb(0, dev->iobase + PCI171x_CLRFIFO);	// clear FIFO
-	outb(0, dev->iobase + PCI171x_CLRINT);	// clear INT request
-	start_pacer(dev, -1, 0, 0);	// stop 8254
+	devpriv->CntrlReg = Control_SW | Control_CNT0;	/*  Software trigger, CNT0=external */
+	outw(devpriv->CntrlReg, dev->iobase + PCI171x_CONTROL);	/*  reset any operations */
+	outb(0, dev->iobase + PCI171x_CLRFIFO);	/*  clear FIFO */
+	outb(0, dev->iobase + PCI171x_CLRINT);	/*  clear INT request */
+	start_pacer(dev, -1, 0, 0);	/*  stop 8254 */
 	devpriv->da_ranges = 0;
 	if (this_board->n_aochan) {
-		outb(devpriv->da_ranges, dev->iobase + PCI171x_DAREF);	// set DACs to 0..5V
-		outw(0, dev->iobase + PCI171x_DA1);	// set DA outputs to 0V
+		outb(devpriv->da_ranges, dev->iobase + PCI171x_DAREF);	/*  set DACs to 0..5V */
+		outw(0, dev->iobase + PCI171x_DA1);	/*  set DA outputs to 0V */
 		devpriv->ao_data[0] = 0x0000;
 		if (this_board->n_aochan > 1) {
 			outw(0, dev->iobase + PCI171x_DA2);
 			devpriv->ao_data[1] = 0x0000;
 		}
 	}
-	outw(0, dev->iobase + PCI171x_DO);	// digital outputs to 0
-	outb(0, dev->iobase + PCI171x_CLRFIFO);	// clear FIFO
-	outb(0, dev->iobase + PCI171x_CLRINT);	// clear INT request
+	outw(0, dev->iobase + PCI171x_DO);	/*  digital outputs to 0 */
+	outb(0, dev->iobase + PCI171x_CLRFIFO);	/*  clear FIFO */
+	outb(0, dev->iobase + PCI171x_CLRINT);	/*  clear INT request */
 
 	DPRINTK("adv_pci1710 EDBG: END: pci171x_reset(...)\n");
 	return 0;
@@ -1279,17 +1281,17 @@ static int pci171x_reset(struct comedi_device * dev)
 /*
 ==============================================================================
 */
-static int pci1720_reset(struct comedi_device * dev)
+static int pci1720_reset(struct comedi_device *dev)
 {
 	DPRINTK("adv_pci1710 EDBG: BGN: pci1720_reset(...)\n");
-	outb(Syncont_SC0, dev->iobase + PCI1720_SYNCONT);	// set synchronous output mode
+	outb(Syncont_SC0, dev->iobase + PCI1720_SYNCONT);	/*  set synchronous output mode */
 	devpriv->da_ranges = 0xAA;
-	outb(devpriv->da_ranges, dev->iobase + PCI1720_RANGE);	// set all ranges to +/-5V
-	outw(0x0800, dev->iobase + PCI1720_DA0);	// set outputs to 0V
+	outb(devpriv->da_ranges, dev->iobase + PCI1720_RANGE);	/*  set all ranges to +/-5V */
+	outw(0x0800, dev->iobase + PCI1720_DA0);	/*  set outputs to 0V */
 	outw(0x0800, dev->iobase + PCI1720_DA1);
 	outw(0x0800, dev->iobase + PCI1720_DA2);
 	outw(0x0800, dev->iobase + PCI1720_DA3);
-	outb(0, dev->iobase + PCI1720_SYNCOUT);	// update outputs
+	outb(0, dev->iobase + PCI1720_SYNCOUT);	/*  update outputs */
 	devpriv->ao_data[0] = 0x0800;
 	devpriv->ao_data[1] = 0x0800;
 	devpriv->ao_data[2] = 0x0800;
@@ -1301,7 +1303,7 @@ static int pci1720_reset(struct comedi_device * dev)
 /*
 ==============================================================================
 */
-static int pci1710_reset(struct comedi_device * dev)
+static int pci1710_reset(struct comedi_device *dev)
 {
 	DPRINTK("adv_pci1710 EDBG: BGN: pci1710_reset(...)\n");
 	switch (this_board->cardtype) {
@@ -1316,7 +1318,7 @@ static int pci1710_reset(struct comedi_device * dev)
 /*
 ==============================================================================
 */
-static int pci1710_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int pci1710_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	int ret, subdev, n_subdevices;
@@ -1329,13 +1331,14 @@ static int pci1710_attach(struct comedi_device * dev, struct comedi_devconfig *
 	int i;
 	int board_index;
 
-	rt_printk("comedi%d: adv_pci1710: ", dev->minor);
+	printk("comedi%d: adv_pci1710: ", dev->minor);
 
 	opt_bus = it->options[0];
 	opt_slot = it->options[1];
 
-	if ((ret = alloc_private(dev, sizeof(struct pci1710_private))) < 0) {
-		rt_printk(" - Allocation failed!\n");
+	ret = alloc_private(dev, sizeof(struct pci1710_private));
+	if (ret < 0) {
+		printk(" - Allocation failed!\n");
 		return -ENOMEM;
 	}
 
@@ -1345,20 +1348,20 @@ static int pci1710_attach(struct comedi_device * dev, struct comedi_devconfig *
 	board_index = this_board - boardtypes;
 	while (NULL != (pcidev = pci_get_device(PCI_VENDOR_ID_ADVANTECH,
 		PCI_ANY_ID, pcidev))) {
-		if(strcmp(this_board->name, DRV_NAME) == 0)
+		if (strcmp (this_board->name, DRV_NAME) == 0)
 		{
-			for(i = 0; i < n_boardtypes; ++i)
+			for (i = 0; i < n_boardtypes; ++i)
 			{
-				if(pcidev->device == boardtypes[i].device_id)
+				if (pcidev->device == boardtypes[i].device_id)
 				{
 					board_index = i;
 					break;
 				}
 			}
-			if(i == n_boardtypes) continue;
+			if (i == n_boardtypes) continue;
 		}else
 		{
-			if(pcidev->device != boardtypes[board_index].device_id) continue;
+			if (pcidev->device != boardtypes[board_index].device_id) continue;
 		}
 
 		/* Found matching vendor/device. */
@@ -1376,17 +1379,17 @@ static int pci1710_attach(struct comedi_device * dev, struct comedi_devconfig *
 			errstr = "failed to enable PCI device and request regions!";
 			continue;
 		}
-		// fixup board_ptr in case we were using the dummy entry with the driver name
+		/*  fixup board_ptr in case we were using the dummy entry with the driver name */
 		dev->board_ptr = &boardtypes[board_index];
 		break;
 	}
 
 	if (!pcidev) {
 		if (opt_bus || opt_slot) {
-			rt_printk(" - Card at b:s %d:%d %s\n",
+			printk(" - Card at b:s %d:%d %s\n",
 				opt_bus, opt_slot, errstr);
 		} else {
-			rt_printk(" - Card %s\n", errstr);
+			printk(" - Card %s\n", errstr);
 		}
 		return -EIO;
 	}
@@ -1397,7 +1400,7 @@ static int pci1710_attach(struct comedi_device * dev, struct comedi_devconfig *
 	irq = pcidev->irq;
 	iobase = pci_resource_start(pcidev, 2);
 
-	rt_printk(", b:s:f=%d:%d:%d, io=0x%4lx", pci_bus, pci_slot, pci_func,
+	printk(", b:s:f=%d:%d:%d, io=0x%4lx", pci_bus, pci_slot, pci_func,
 		iobase);
 
 	dev->iobase = iobase;
@@ -1417,8 +1420,9 @@ static int pci1710_attach(struct comedi_device * dev, struct comedi_devconfig *
 	if (this_board->n_counter)
 		n_subdevices++;
 
-	if ((ret = alloc_subdevices(dev, n_subdevices)) < 0) {
-		rt_printk(" - Allocation failed!\n");
+	ret = alloc_subdevices(dev, n_subdevices);
+	if (ret < 0) {
+		printk(" - Allocation failed!\n");
 		return ret;
 	}
 
@@ -1426,18 +1430,18 @@ static int pci1710_attach(struct comedi_device * dev, struct comedi_devconfig *
 
 	if (this_board->have_irq) {
 		if (irq) {
-			if (comedi_request_irq(irq, interrupt_service_pci1710,
+			if (request_irq(irq, interrupt_service_pci1710,
 					IRQF_SHARED, "Advantech PCI-1710",
 					dev)) {
-				rt_printk
+				printk
 					(", unable to allocate IRQ %d, DISABLING IT",
 					irq);
 				irq = 0;	/* Can't use IRQ */
 			} else {
-				rt_printk(", irq=%u", irq);
+				printk(", irq=%u", irq);
 			}
 		} else {
-			rt_printk(", IRQ disabled");
+			printk(", IRQ disabled");
 		}
 	} else {
 		irq = 0;
@@ -1467,7 +1471,7 @@ static int pci1710_attach(struct comedi_device * dev, struct comedi_devconfig *
 			s->do_cmdtest = pci171x_ai_cmdtest;
 			s->do_cmd = pci171x_ai_cmd;
 		}
-		devpriv->i8254_osc_base = 100;	// 100ns=10MHz
+		devpriv->i8254_osc_base = 100;	/*  100ns=10MHz */
 		subdev++;
 	}
 
@@ -1540,14 +1544,14 @@ static int pci1710_attach(struct comedi_device * dev, struct comedi_devconfig *
 /*
 ==============================================================================
 */
-static int pci1710_detach(struct comedi_device * dev)
+static int pci1710_detach(struct comedi_device *dev)
 {
 
 	if (dev->private) {
 		if (devpriv->valid)
 			pci1710_reset(dev);
 		if (dev->irq)
-			comedi_free_irq(dev->irq, dev);
+			free_irq(dev->irq, dev);
 		if (devpriv->pcidev) {
 			if (dev->iobase) {
 				comedi_pci_disable(devpriv->pcidev);
diff --git a/drivers/staging/comedi/drivers/adv_pci1723.c b/drivers/staging/comedi/drivers/adv_pci1723.c
index 81f7ee18c15..e1994a5290b 100644
--- a/drivers/staging/comedi/drivers/adv_pci1723.c
+++ b/drivers/staging/comedi/drivers/adv_pci1723.c
@@ -54,7 +54,7 @@ TODO:
 
 #define ADVANTECH_VENDOR        0x13fe	/* Advantech PCI vendor ID */
 
-// hardware types of the cards
+/* hardware types of the cards */
 #define TYPE_PCI1723 0
 
 #define IORANGE_1723  0x2A
@@ -92,7 +92,7 @@ TODO:
 
 #define PCI1723_SELECT_CALIBRATION 0x28	/* Select the calibration Ref_V */
 
-//static unsigned short pci_list_builded=0;     /*=1 list of card is know */
+/* static unsigned short pci_list_builded=0;      =1 list of card is know */
 
 static const struct comedi_lrange range_pci1723 = { 1, {
 			BIP_RANGE(10)
@@ -104,27 +104,27 @@ static const struct comedi_lrange range_pci1723 = { 1, {
  */
 struct pci1723_board {
 	const char *name;
-	int vendor_id;		// PCI vendor a device ID of card
+	int vendor_id;		/*  PCI vendor a device ID of card */
 	int device_id;
 	int iorange;
 	char cardtype;
-	int n_aochan;		// num of D/A chans
-	int n_diochan;		// num of DIO chans
-	int ao_maxdata;		// resolution of D/A
-	const struct comedi_lrange *rangelist_ao;	// rangelist for D/A
+	int n_aochan;		/*  num of D/A chans */
+	int n_diochan;		/*  num of DIO chans */
+	int ao_maxdata;		/*  resolution of D/A */
+	const struct comedi_lrange *rangelist_ao;	/*  rangelist for D/A */
 };
 
 static const struct pci1723_board boardtypes[] = {
 	{
-	      name:	"pci1723",
-	      vendor_id:ADVANTECH_VENDOR,
-	      device_id:0x1723,
-	      iorange:	IORANGE_1723,
-	      cardtype:TYPE_PCI1723,
-	      n_aochan:8,
-	      n_diochan:16,
-	      ao_maxdata:0xffff,
-	      rangelist_ao:&range_pci1723,
+	.name = "pci1723",
+	.vendor_id = ADVANTECH_VENDOR,
+	.device_id = 0x1723,
+	.iorange = IORANGE_1723,
+	.cardtype = TYPE_PCI1723,
+	.n_aochan = 8,
+	.n_diochan = 16,
+	.ao_maxdata = 0xffff,
+	.rangelist_ao = &range_pci1723,
 		},
 };
 
@@ -143,26 +143,26 @@ MODULE_DEVICE_TABLE(pci, pci1723_pci_table);
  * the board, and also about the kernel module that contains
  * the device code.
  */
-static int pci1723_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int pci1723_detach(struct comedi_device * dev);
+static int pci1723_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int pci1723_detach(struct comedi_device *dev);
 
 #define n_boardtypes (sizeof(boardtypes)/sizeof(struct pci1723_board))
 
 static struct comedi_driver driver_pci1723 = {
-      driver_name:"adv_pci1723",
-      module:THIS_MODULE,
-      attach:pci1723_attach,
-      detach:pci1723_detach,
+	.driver_name = "adv_pci1723",
+	.module = THIS_MODULE,
+	.attach = pci1723_attach,
+	.detach = pci1723_detach,
 };
 
 /* this structure is for data unique to this hardware driver. */
 struct pci1723_private {
-	int valid;		//card is usable;
+	int valid;		/* card is usable; */
 
 	struct pci_dev *pcidev;
-	unsigned char da_range[8];	// D/A output range for each channel
+	unsigned char da_range[8];	/*  D/A output range for each channel */
 
-	short ao_data[8];	// data output buffer
+	short ao_data[8];	/*  data output buffer */
 };
 
 /*the following macro to make it easy to
@@ -175,35 +175,35 @@ struct pci1723_private {
 /*
  *   the pci1723 card reset;
  */
-static int pci1723_reset(struct comedi_device * dev)
+static int pci1723_reset(struct comedi_device *dev)
 {
 	int i;
 	DPRINTK("adv_pci1723 EDBG: BGN: pci1723_reset(...)\n");
 
-	outw(0x01, dev->iobase + PCI1723_SYN_SET);	// set synchronous output mode
+	outw(0x01, dev->iobase + PCI1723_SYN_SET);	/*  set synchronous output mode */
 
 	for (i = 0; i < 8; i++) {
-		// set all outputs to 0V
+		/*  set all outputs to 0V */
 		devpriv->ao_data[i] = 0x8000;
 		outw(devpriv->ao_data[i], dev->iobase + PCI1723_DA(i));
-		// set all ranges to +/- 10V
+		/*  set all ranges to +/- 10V */
 		devpriv->da_range[i] = 0;
 		outw(((devpriv->da_range[i] << 4) | i),
 			PCI1723_RANGE_CALIBRATION_MODE);
 	}
 
-	outw(0, dev->iobase + PCI1723_CHANGE_CHA_OUTPUT_TYPE_STROBE);	// update ranges
-	outw(0, dev->iobase + PCI1723_SYN_STROBE);	// update outputs
+	outw(0, dev->iobase + PCI1723_CHANGE_CHA_OUTPUT_TYPE_STROBE);	/*  update ranges */
+	outw(0, dev->iobase + PCI1723_SYN_STROBE);	/*  update outputs */
 
-	// set asynchronous output mode
+	/*  set asynchronous output mode */
 	outw(0, dev->iobase + PCI1723_SYN_SET);
 
 	DPRINTK("adv_pci1723 EDBG: END: pci1723_reset(...)\n");
 	return 0;
 }
 
-static int pci1723_insn_read_ao(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci1723_insn_read_ao(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n, chan;
 
@@ -218,8 +218,8 @@ static int pci1723_insn_read_ao(struct comedi_device * dev, struct comedi_subdev
 /*
   analog data output;
 */
-static int pci1723_ao_write_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci1723_ao_write_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n, chan;
 	chan = CR_CHAN(insn->chanspec);
@@ -238,8 +238,8 @@ static int pci1723_ao_write_winsn(struct comedi_device * dev, struct comedi_subd
 /*
   digital i/o config/query
 */
-static int pci1723_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci1723_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int mask;
 	unsigned int bits;
@@ -265,12 +265,12 @@ static int pci1723_dio_insn_config(struct comedi_device * dev, struct comedi_sub
 		return -EINVAL;
 	}
 
-	// update hardware DIO mode
-	dio_mode = 0x0000;	// low byte output, high byte output
+	/*  update hardware DIO mode */
+	dio_mode = 0x0000;	/*  low byte output, high byte output */
 	if ((s->io_bits & 0x00FF) == 0)
-		dio_mode |= 0x0001;	// low byte input
+		dio_mode |= 0x0001;	/*  low byte input */
 	if ((s->io_bits & 0xFF00) == 0)
-		dio_mode |= 0x0002;	// high byte input
+		dio_mode |= 0x0002;	/*  high byte input */
 	outw(dio_mode, dev->iobase + PCI1723_DIGITAL_IO_PORT_SET);
 	return 1;
 }
@@ -278,8 +278,8 @@ static int pci1723_dio_insn_config(struct comedi_device * dev, struct comedi_sub
 /*
   digital i/o bits read/write
 */
-static int pci1723_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci1723_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (data[0]) {
 		s->state &= ~data[0];
@@ -294,7 +294,7 @@ static int pci1723_dio_insn_bits(struct comedi_device * dev, struct comedi_subde
  * Attach is called by the Comedi core to configure the driver
  * for a pci1723 board.
  */
-static int pci1723_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int pci1723_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	int ret, subdev, n_subdevices;
@@ -304,14 +304,15 @@ static int pci1723_attach(struct comedi_device * dev, struct comedi_devconfig *
 	int opt_bus, opt_slot;
 	const char *errstr;
 
-	rt_printk("comedi%d: adv_pci1723: board=%s", dev->minor,
+	printk("comedi%d: adv_pci1723: board=%s", dev->minor,
 		this_board->name);
 
 	opt_bus = it->options[0];
 	opt_slot = it->options[1];
 
-	if ((ret = alloc_private(dev, sizeof(struct pci1723_private))) < 0) {
-		rt_printk(" - Allocation failed!\n");
+	ret = alloc_private(dev, sizeof(struct pci1723_private));
+	if (ret < 0) {
+		printk(" - Allocation failed!\n");
 		return -ENOMEM;
 	}
 
@@ -341,10 +342,10 @@ static int pci1723_attach(struct comedi_device * dev, struct comedi_devconfig *
 
 	if (!pcidev) {
 		if (opt_bus || opt_slot) {
-			rt_printk(" - Card at b:s %d:%d %s\n",
+			printk(" - Card at b:s %d:%d %s\n",
 				opt_bus, opt_slot, errstr);
 		} else {
-			rt_printk(" - Card %s\n", errstr);
+			printk(" - Card %s\n", errstr);
 		}
 		return -EIO;
 	}
@@ -354,7 +355,7 @@ static int pci1723_attach(struct comedi_device * dev, struct comedi_devconfig *
 	pci_func = PCI_FUNC(pcidev->devfn);
 	iobase = pci_resource_start(pcidev, 2);
 
-	rt_printk(", b:s:f=%d:%d:%d, io=0x%4x", pci_bus, pci_slot, pci_func,
+	printk(", b:s:f=%d:%d:%d, io=0x%4x", pci_bus, pci_slot, pci_func,
 		iobase);
 
 	dev->iobase = iobase;
@@ -369,8 +370,9 @@ static int pci1723_attach(struct comedi_device * dev, struct comedi_devconfig *
 	if (this_board->n_diochan)
 		n_subdevices++;
 
-	if ((ret = alloc_subdevices(dev, n_subdevices)) < 0) {
-		rt_printk(" - Allocation failed!\n");
+	ret = alloc_subdevices(dev, n_subdevices);
+	if (ret < 0) {
+		printk(" - Allocation failed!\n");
 		return ret;
 	}
 
@@ -389,22 +391,22 @@ static int pci1723_attach(struct comedi_device * dev, struct comedi_devconfig *
 		s->insn_write = pci1723_ao_write_winsn;
 		s->insn_read = pci1723_insn_read_ao;
 
-		// read DIO config
+		/*  read DIO config */
 		switch (inw(dev->iobase + PCI1723_DIGITAL_IO_PORT_MODE) & 0x03) {
-		case 0x00:	// low byte output, high byte output
+		case 0x00:	/*  low byte output, high byte output */
 			s->io_bits = 0xFFFF;
 			break;
-		case 0x01:	// low byte input, high byte output
+		case 0x01:	/*  low byte input, high byte output */
 			s->io_bits = 0xFF00;
 			break;
-		case 0x02:	// low byte output, high byte input
+		case 0x02:	/*  low byte output, high byte input */
 			s->io_bits = 0x00FF;
 			break;
-		case 0x03:	// low byte input, high byte input
+		case 0x03:	/*  low byte input, high byte input */
 			s->io_bits = 0x0000;
 			break;
 		}
-		// read DIO port state
+		/*  read DIO port state */
 		s->state = inw(dev->iobase + PCI1723_READ_DIGITAL_INPUT_DATA);
 
 		subdev++;
@@ -439,7 +441,7 @@ static int pci1723_attach(struct comedi_device * dev, struct comedi_devconfig *
  * allocated by _attach().  dev->private and dev->subdevices are
  * deallocated automatically by the core.
  */
-static int pci1723_detach(struct comedi_device * dev)
+static int pci1723_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: pci1723: remove\n", dev->minor);
 
diff --git a/drivers/staging/comedi/drivers/adv_pci_dio.c b/drivers/staging/comedi/drivers/adv_pci_dio.c
index 2604425c3a0..5a8c0a3bb2f 100644
--- a/drivers/staging/comedi/drivers/adv_pci_dio.c
+++ b/drivers/staging/comedi/drivers/adv_pci_dio.c
@@ -40,7 +40,7 @@ Configuration options:
 
 #undef DPRINTK
 #ifdef PCI_DIO_EXTDEBUG
-#define DPRINTK(fmt, args...) rt_printk(fmt, ## args)
+#define DPRINTK(fmt, args...) printk(fmt, ## args)
 #else
 #define DPRINTK(fmt, args...)
 #endif
@@ -183,8 +183,8 @@ enum hw_io_access {
 
 #define OMBCMD_RETRY	0x03	/* 3 times try request before error */
 
-static int pci_dio_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int pci_dio_detach(struct comedi_device * dev);
+static int pci_dio_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int pci_dio_detach(struct comedi_device *dev);
 
 struct diosubd_data {
 	int chans;		/*  num of chans */
@@ -323,10 +323,10 @@ static const struct dio_boardtype boardtypes[] = {
 #define n_boardtypes (sizeof(boardtypes)/sizeof(struct dio_boardtype))
 
 static struct comedi_driver driver_pci_dio = {
-      driver_name:"adv_pci_dio",
-      module:THIS_MODULE,
-      attach:pci_dio_attach,
-      detach:pci_dio_detach
+	.driver_name = "adv_pci_dio",
+	.module = THIS_MODULE,
+	.attach = pci_dio_attach,
+	.detach = pci_dio_detach
 };
 
 struct pci_dio_private {
@@ -357,8 +357,8 @@ static struct pci_dio_private *pci_priv = NULL;	/* list of allocated cards */
 /*
 ==============================================================================
 */
-static int pci_dio_insn_bits_di_b(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci_dio_insn_bits_di_b(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	const struct diosubd_data *d = (const struct diosubd_data *)s->private;
 	int i;
@@ -374,8 +374,8 @@ static int pci_dio_insn_bits_di_b(struct comedi_device * dev, struct comedi_subd
 /*
 ==============================================================================
 */
-static int pci_dio_insn_bits_di_w(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci_dio_insn_bits_di_w(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	const struct diosubd_data *d = (const struct diosubd_data *)s->private;
 	int i;
@@ -390,8 +390,8 @@ static int pci_dio_insn_bits_di_w(struct comedi_device * dev, struct comedi_subd
 /*
 ==============================================================================
 */
-static int pci_dio_insn_bits_do_b(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci_dio_insn_bits_do_b(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	const struct diosubd_data *d = (const struct diosubd_data *)s->private;
 	int i;
@@ -411,8 +411,8 @@ static int pci_dio_insn_bits_do_b(struct comedi_device * dev, struct comedi_subd
 /*
 ==============================================================================
 */
-static int pci_dio_insn_bits_do_w(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci_dio_insn_bits_do_w(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	const struct diosubd_data *d = (const struct diosubd_data *)s->private;
 	int i;
@@ -432,7 +432,7 @@ static int pci_dio_insn_bits_do_w(struct comedi_device * dev, struct comedi_subd
 /*
 ==============================================================================
 */
-static int pci1760_unchecked_mbxrequest(struct comedi_device * dev,
+static int pci1760_unchecked_mbxrequest(struct comedi_device *dev,
 	unsigned char *omb, unsigned char *imb, int repeats)
 {
 	int cnt, tout, ok = 0;
@@ -443,14 +443,15 @@ static int pci1760_unchecked_mbxrequest(struct comedi_device * dev,
 		outb(omb[2], dev->iobase + OMB2);
 		outb(omb[3], dev->iobase + OMB3);
 		for (tout = 0; tout < 251; tout++) {
-			if ((imb[2] = inb(dev->iobase + IMB2)) == omb[2]) {
+			imb[2] = inb(dev->iobase + IMB2);
+			if (imb[2] == omb[2]) {
 				imb[0] = inb(dev->iobase + IMB0);
 				imb[1] = inb(dev->iobase + IMB1);
 				imb[3] = inb(dev->iobase + IMB3);
 				ok = 1;
 				break;
 			}
-			comedi_udelay(1);
+			udelay(1);
 		}
 		if (ok)
 			return 0;
@@ -460,7 +461,7 @@ static int pci1760_unchecked_mbxrequest(struct comedi_device * dev,
 	return -ETIME;
 }
 
-static int pci1760_clear_imb2(struct comedi_device * dev)
+static int pci1760_clear_imb2(struct comedi_device *dev)
 {
 	unsigned char omb[4] = { 0x0, 0x0, CMD_ClearIMB2, 0x0 };
 	unsigned char imb[4];
@@ -470,7 +471,7 @@ static int pci1760_clear_imb2(struct comedi_device * dev)
 	return pci1760_unchecked_mbxrequest(dev, omb, imb, OMBCMD_RETRY);
 }
 
-static int pci1760_mbxrequest(struct comedi_device * dev,
+static int pci1760_mbxrequest(struct comedi_device *dev,
 	unsigned char *omb, unsigned char *imb)
 {
 	if (omb[2] == CMD_ClearIMB2) {
@@ -490,8 +491,8 @@ static int pci1760_mbxrequest(struct comedi_device * dev,
 /*
 ==============================================================================
 */
-static int pci1760_insn_bits_di(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci1760_insn_bits_di(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	data[1] = inb(dev->iobase + IMB3);
 
@@ -501,8 +502,8 @@ static int pci1760_insn_bits_di(struct comedi_device * dev, struct comedi_subdev
 /*
 ==============================================================================
 */
-static int pci1760_insn_bits_do(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci1760_insn_bits_do(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int ret;
 	unsigned char omb[4] = {
@@ -517,7 +518,8 @@ static int pci1760_insn_bits_do(struct comedi_device * dev, struct comedi_subdev
 		s->state &= ~data[0];
 		s->state |= (data[0] & data[1]);
 		omb[0] = s->state;
-		if (!(ret = pci1760_mbxrequest(dev, omb, imb)))
+		ret = pci1760_mbxrequest(dev, omb, imb);
+		if (!ret)
 			return ret;
 	}
 	data[1] = s->state;
@@ -528,8 +530,8 @@ static int pci1760_insn_bits_do(struct comedi_device * dev, struct comedi_subdev
 /*
 ==============================================================================
 */
-static int pci1760_insn_cnt_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci1760_insn_cnt_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int ret, n;
 	unsigned char omb[4] = {
@@ -541,7 +543,8 @@ static int pci1760_insn_cnt_read(struct comedi_device * dev, struct comedi_subde
 	unsigned char imb[4];
 
 	for (n = 0; n < insn->n; n++) {
-		if (!(ret = pci1760_mbxrequest(dev, omb, imb)))
+		ret = pci1760_mbxrequest(dev, omb, imb);
+		if (!ret)
 			return ret;
 		data[n] = (imb[1] << 8) + imb[0];
 	}
@@ -552,8 +555,8 @@ static int pci1760_insn_cnt_read(struct comedi_device * dev, struct comedi_subde
 /*
 ==============================================================================
 */
-static int pci1760_insn_cnt_write(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci1760_insn_cnt_write(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int ret;
 	unsigned char chan = CR_CHAN(insn->chanspec) & 0x07;
@@ -567,20 +570,23 @@ static int pci1760_insn_cnt_write(struct comedi_device * dev, struct comedi_subd
 	unsigned char imb[4];
 
 	if (devpriv->CntResValue[chan] != (data[0] & 0xffff)) {	/*  Set reset value if different */
-		if (!(ret = pci1760_mbxrequest(dev, omb, imb)))
+		ret =  pci1760_mbxrequest(dev, omb, imb);
+		if (!ret)
 			return ret;
 		devpriv->CntResValue[chan] = data[0] & 0xffff;
 	}
 
 	omb[0] = bitmask;	/*  reset counter to it reset value */
 	omb[2] = CMD_ResetIDICounters;
-	if (!(ret = pci1760_mbxrequest(dev, omb, imb)))
+	ret = pci1760_mbxrequest(dev, omb, imb);
+	if (!ret)
 		return ret;
 
 	if (!(bitmask & devpriv->IDICntEnable)) {	/*  start counter if it don't run */
 		omb[0] = bitmask;
 		omb[2] = CMD_EnableIDICounters;
-		if (!(ret = pci1760_mbxrequest(dev, omb, imb)))
+		ret = pci1760_mbxrequest(dev, omb, imb);
+		if (!ret)
 			return ret;
 		devpriv->IDICntEnable |= bitmask;
 	}
@@ -590,7 +596,7 @@ static int pci1760_insn_cnt_write(struct comedi_device * dev, struct comedi_subd
 /*
 ==============================================================================
 */
-static int pci1760_reset(struct comedi_device * dev)
+static int pci1760_reset(struct comedi_device *dev)
 {
 	int i;
 	unsigned char omb[4] = { 0x00, 0x00, 0x00, 0x00 };
@@ -667,7 +673,7 @@ static int pci1760_reset(struct comedi_device * dev)
 /*
 ==============================================================================
 */
-static int pci_dio_reset(struct comedi_device * dev)
+static int pci_dio_reset(struct comedi_device *dev)
 {
 	DPRINTK("adv_pci_dio EDBG: BGN: pci171x_reset(...)\n");
 
@@ -750,7 +756,7 @@ static int pci_dio_reset(struct comedi_device * dev)
 /*
 ==============================================================================
 */
-static int pci1760_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int pci1760_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	int subdev = 0;
@@ -802,8 +808,8 @@ static int pci1760_attach(struct comedi_device * dev, struct comedi_devconfig *
 /*
 ==============================================================================
 */
-static int pci_dio_add_di(struct comedi_device * dev, struct comedi_subdevice * s,
-	const struct diosubd_data * d, int subdev)
+static int pci_dio_add_di(struct comedi_device *dev, struct comedi_subdevice *s,
+	const struct diosubd_data *d, int subdev)
 {
 	s->type = COMEDI_SUBD_DI;
 	s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_COMMON | d->specflags;
@@ -829,8 +835,8 @@ static int pci_dio_add_di(struct comedi_device * dev, struct comedi_subdevice *
 /*
 ==============================================================================
 */
-static int pci_dio_add_do(struct comedi_device * dev, struct comedi_subdevice * s,
-	const struct diosubd_data * d, int subdev)
+static int pci_dio_add_do(struct comedi_device *dev, struct comedi_subdevice *s,
+	const struct diosubd_data *d, int subdev)
 {
 	s->type = COMEDI_SUBD_DO;
 	s->subdev_flags = SDF_WRITABLE | SDF_GROUND | SDF_COMMON;
@@ -857,7 +863,7 @@ static int pci_dio_add_do(struct comedi_device * dev, struct comedi_subdevice *
 /*
 ==============================================================================
 */
-static int CheckAndAllocCard(struct comedi_device * dev, struct comedi_devconfig * it,
+static int CheckAndAllocCard(struct comedi_device *dev, struct comedi_devconfig *it,
 	struct pci_dev *pcidev)
 {
 	struct pci_dio_private *pr, *prev;
@@ -883,17 +889,18 @@ static int CheckAndAllocCard(struct comedi_device * dev, struct comedi_devconfig
 /*
 ==============================================================================
 */
-static int pci_dio_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int pci_dio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	int ret, subdev, n_subdevices, i, j;
 	unsigned long iobase;
 	struct pci_dev *pcidev;
 
-	rt_printk("comedi%d: adv_pci_dio: ", dev->minor);
+	printk("comedi%d: adv_pci_dio: ", dev->minor);
 
-	if ((ret = alloc_private(dev, sizeof(struct pci_dio_private))) < 0) {
-		rt_printk(", Error: Cann't allocate private memory!\n");
+	ret = alloc_private(dev, sizeof(struct pci_dio_private));
+	if (ret < 0) {
+		printk(", Error: Cann't allocate private memory!\n");
 		return -ENOMEM;
 	}
 
@@ -925,18 +932,18 @@ static int pci_dio_attach(struct comedi_device * dev, struct comedi_devconfig *
 	}
 
 	if (!dev->board_ptr) {
-		rt_printk
+		printk
 			(", Error: Requested type of the card was not found!\n");
 		return -EIO;
 	}
 
 	if (comedi_pci_enable(pcidev, driver_pci_dio.driver_name)) {
-		rt_printk
+		printk
 			(", Error: Can't enable PCI device and request regions!\n");
 		return -EIO;
 	}
 	iobase = pci_resource_start(pcidev, this_board->main_pci_region);
-	rt_printk(", b:s:f=%d:%d:%d, io=0x%4lx",
+	printk(", b:s:f=%d:%d:%d, io=0x%4lx",
 		pcidev->bus->number, PCI_SLOT(pcidev->devfn),
 		PCI_FUNC(pcidev->devfn), iobase);
 
@@ -959,12 +966,13 @@ static int pci_dio_attach(struct comedi_device * dev, struct comedi_devconfig *
 			n_subdevices++;
 	}
 
-	if ((ret = alloc_subdevices(dev, n_subdevices)) < 0) {
-		rt_printk(", Error: Cann't allocate subdevice memory!\n");
+	ret = alloc_subdevices(dev, n_subdevices);
+	if (ret < 0) {
+		printk(", Error: Cann't allocate subdevice memory!\n");
 		return ret;
 	}
 
-	rt_printk(".\n");
+	printk(".\n");
 
 	subdev = 0;
 
@@ -1011,7 +1019,7 @@ static int pci_dio_attach(struct comedi_device * dev, struct comedi_devconfig *
 /*
 ==============================================================================
 */
-static int pci_dio_detach(struct comedi_device * dev)
+static int pci_dio_detach(struct comedi_device *dev)
 {
 	int i, j;
 	struct comedi_subdevice *s;
diff --git a/drivers/staging/comedi/drivers/aio_aio12_8.c b/drivers/staging/comedi/drivers/aio_aio12_8.c
index b97b4d82611..72283ae8136 100644
--- a/drivers/staging/comedi/drivers/aio_aio12_8.c
+++ b/drivers/staging/comedi/drivers/aio_aio12_8.c
@@ -77,7 +77,7 @@ struct aio12_8_boardtype {
 
 static const struct aio12_8_boardtype board_types[] = {
 	{
-      name:	"aio_aio12_8"},
+	.name = "aio_aio12_8"},
 };
 
 #define	thisboard	((const struct aio12_8_boardtype  *) dev->board_ptr)
@@ -88,29 +88,29 @@ struct aio12_8_private {
 
 #define devpriv	((struct aio12_8_private *) dev->private)
 
-static int aio_aio12_8_ai_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int aio_aio12_8_ai_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n;
 	unsigned char control =
 		ADC_MODE_NORMAL |
 		(CR_RANGE(insn->chanspec) << 3) | CR_CHAN(insn->chanspec);
 
-	//read status to clear EOC latch
+	/* read status to clear EOC latch */
 	inb(dev->iobase + AIO12_8_STATUS);
 
 	for (n = 0; n < insn->n; n++) {
 		int timeout = 5;
 
-		// Setup and start conversion
+		/*  Setup and start conversion */
 		outb(control, dev->iobase + AIO12_8_ADC);
 
-		// Wait for conversion to complete
+		/*  Wait for conversion to complete */
 		while (timeout &&
 			!(inb(dev->iobase + AIO12_8_STATUS) & STATUS_ADC_EOC)) {
 			timeout--;
 			printk("timeout %d\n", timeout);
-			comedi_udelay(1);
+			udelay(1);
 		}
 		if (timeout == 0) {
 			comedi_error(dev, "ADC timeout");
@@ -122,8 +122,8 @@ static int aio_aio12_8_ai_read(struct comedi_device * dev, struct comedi_subdevi
 	return n;
 }
 
-static int aio_aio12_8_ao_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int aio_aio12_8_ao_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int val = devpriv->ao_readback[CR_CHAN(insn->chanspec)];
@@ -133,19 +133,19 @@ static int aio_aio12_8_ao_read(struct comedi_device * dev, struct comedi_subdevi
 	return insn->n;
 }
 
-static int aio_aio12_8_ao_write(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int aio_aio12_8_ao_write(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
 	unsigned long port = dev->iobase + AIO12_8_DAC_0 + (2 * chan);
 
-	//enable DACs
+	/* enable DACs */
 	outb(0x01, dev->iobase + DAC_ENABLE);
 
 	for (i = 0; i < insn->n; i++) {
-		outb(data[i] & 0xFF, port);	// LSB
-		outb((data[i] >> 8) & 0x0F, port + 1);	// MSB
+		outb(data[i] & 0xFF, port);	/*  LSB */
+		outb((data[i] >> 8) & 0x0F, port + 1);	/*  MSB */
 		devpriv->ao_readback[chan] = data[i];
 	}
 	return insn->n;
@@ -161,7 +161,7 @@ static const struct comedi_lrange range_aio_aio12_8 = {
 		}
 };
 
-static int aio_aio12_8_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int aio_aio12_8_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int iobase;
 	struct comedi_subdevice *s;
@@ -205,7 +205,7 @@ static int aio_aio12_8_attach(struct comedi_device * dev, struct comedi_devconfi
 	return 0;
 }
 
-static int aio_aio12_8_detach(struct comedi_device * dev)
+static int aio_aio12_8_detach(struct comedi_device *dev)
 {
 	subdev_8255_cleanup(dev, &dev->subdevices[2]);
 	if (dev->iobase)
@@ -214,13 +214,13 @@ static int aio_aio12_8_detach(struct comedi_device * dev)
 }
 
 static struct comedi_driver driver_aio_aio12_8 = {
-      driver_name:"aio_aio12_8",
-      module:THIS_MODULE,
-      attach:aio_aio12_8_attach,
-      detach:aio_aio12_8_detach,
-      board_name:&board_types[0].name,
-      num_names:1,
-      offset:sizeof(struct aio12_8_boardtype),
+	.driver_name = "aio_aio12_8",
+	.module = THIS_MODULE,
+	.attach = aio_aio12_8_attach,
+	.detach = aio_aio12_8_detach,
+	.board_name = &board_types[0].name,
+	.num_names = 1,
+	.offset = sizeof(struct aio12_8_boardtype),
 };
 
 COMEDI_INITCLEANUP(driver_aio_aio12_8);
diff --git a/drivers/staging/comedi/drivers/aio_iiro_16.c b/drivers/staging/comedi/drivers/aio_iiro_16.c
index 9160fdf0ca3..d062f8619b6 100644
--- a/drivers/staging/comedi/drivers/aio_iiro_16.c
+++ b/drivers/staging/comedi/drivers/aio_iiro_16.c
@@ -52,9 +52,9 @@ struct aio_iiro_16_board {
 
 static const struct aio_iiro_16_board aio_iiro_16_boards[] = {
 	{
-	      name:	"aio_iiro_16",
-	      di:	16,
-      do_:	16},
+	.name = "aio_iiro_16",
+	.di = 16,
+	.do_ = 16},
 };
 
 #define	thisboard	((const struct aio_iiro_16_board *) dev->board_ptr)
@@ -67,27 +67,27 @@ struct aio_iiro_16_private {
 
 #define	devpriv	((struct aio_iiro_16_private *) dev->private)
 
-static int aio_iiro_16_attach(struct comedi_device * dev, struct comedi_devconfig * it);
+static int aio_iiro_16_attach(struct comedi_device *dev, struct comedi_devconfig *it);
 
-static int aio_iiro_16_detach(struct comedi_device * dev);
+static int aio_iiro_16_detach(struct comedi_device *dev);
 
 static struct comedi_driver driver_aio_iiro_16 = {
-      driver_name:"aio_iiro_16",
-      module:THIS_MODULE,
-      attach:aio_iiro_16_attach,
-      detach:aio_iiro_16_detach,
-      board_name:&aio_iiro_16_boards[0].name,
-      offset:sizeof(struct aio_iiro_16_board),
-      num_names:sizeof(aio_iiro_16_boards) / sizeof(struct aio_iiro_16_board),
+	.driver_name = "aio_iiro_16",
+	.module = THIS_MODULE,
+	.attach = aio_iiro_16_attach,
+	.detach = aio_iiro_16_detach,
+	.board_name = &aio_iiro_16_boards[0].name,
+	.offset = sizeof(struct aio_iiro_16_board),
+	.num_names = ARRAY_SIZE(aio_iiro_16_boards),
 };
 
-static int aio_iiro_16_dio_insn_bits_read(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data);
+static int aio_iiro_16_dio_insn_bits_read(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data);
 
-static int aio_iiro_16_dio_insn_bits_write(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data);
+static int aio_iiro_16_dio_insn_bits_write(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data);
 
-static int aio_iiro_16_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int aio_iiro_16_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int iobase;
 	struct comedi_subdevice *s;
@@ -132,7 +132,7 @@ static int aio_iiro_16_attach(struct comedi_device * dev, struct comedi_devconfi
 	return 1;
 }
 
-static int aio_iiro_16_detach(struct comedi_device * dev)
+static int aio_iiro_16_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: aio_iiro_16: remove\n", dev->minor);
 
@@ -142,8 +142,8 @@ static int aio_iiro_16_detach(struct comedi_device * dev)
 	return 0;
 }
 
-static int aio_iiro_16_dio_insn_bits_write(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+static int aio_iiro_16_dio_insn_bits_write(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -161,8 +161,8 @@ static int aio_iiro_16_dio_insn_bits_write(struct comedi_device * dev,
 	return 2;
 }
 
-static int aio_iiro_16_dio_insn_bits_read(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+static int aio_iiro_16_dio_insn_bits_read(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
diff --git a/drivers/staging/comedi/drivers/am9513.h b/drivers/staging/comedi/drivers/am9513.h
index f533cf1658c..73367d6afff 100644
--- a/drivers/staging/comedi/drivers/am9513.h
+++ b/drivers/staging/comedi/drivers/am9513.h
@@ -46,33 +46,33 @@
 
 #ifdef Am9513_8BITBUS
 
-#define Am9513_write_register(reg,val)				\
+#define Am9513_write_register(reg, val)				\
 	do{							\
 		Am9513_output_control(reg);			\
 		Am9513_output_data(val>>8);			\
 		Am9513_output_data(val&0xff);			\
-	}while(0)
+	}while (0)
 
-#define Am9513_read_register(reg,val)				\
+#define Am9513_read_register(reg, val)				\
 	do{							\
 		Am9513_output_control(reg);			\
 		val=Am9513_input_data()<<8;			\
 		val|=Am9513_input_data();			\
-	}while(0)
+	}while (0)
 
 #else /* Am9513_16BITBUS */
 
-#define Am9513_write_register(reg,val)				\
+#define Am9513_write_register(reg, val)				\
 	do{							\
 		Am9513_output_control(reg);			\
 		Am9513_output_data(val);			\
-	}while(0)
+	}while (0)
 
-#define Am9513_read_register(reg,val)				\
+#define Am9513_read_register(reg, val)				\
 	do{							\
 		Am9513_output_control(reg);			\
 		val=Am9513_input_data();			\
-	}while(0)
+	}while (0)
 
 #endif
 
diff --git a/drivers/staging/comedi/drivers/amcc_s5933.h b/drivers/staging/comedi/drivers/amcc_s5933.h
index aceffce7ef3..b810d5f3d97 100644
--- a/drivers/staging/comedi/drivers/amcc_s5933.h
+++ b/drivers/staging/comedi/drivers/amcc_s5933.h
@@ -48,12 +48,12 @@
 /****************************************************************************/
 #define INTCSR_OUTBOX_BYTE(x)	((x) & 0x3)
 #define INTCSR_OUTBOX_SELECT(x)	(((x) & 0x3) << 2)
-#define INTCSR_OUTBOX_EMPTY_INT	0x10	// enable outbox empty interrupt
+#define INTCSR_OUTBOX_EMPTY_INT	0x10	/*  enable outbox empty interrupt */
 #define INTCSR_INBOX_BYTE(x)	(((x) & 0x3) << 8)
 #define INTCSR_INBOX_SELECT(x)	(((x) & 0x3) << 10)
-#define INTCSR_INBOX_FULL_INT	0x1000	// enable inbox full interrupt
-#define INTCSR_INBOX_INTR_STATUS	0x20000	// read, or write clear inbox full interrupt
-#define INTCSR_INTR_ASSERTED	0x800000	// read only, interrupt asserted
+#define INTCSR_INBOX_FULL_INT	0x1000	/*  enable inbox full interrupt */
+#define INTCSR_INBOX_INTR_STATUS	0x20000	/*  read, or write clear inbox full interrupt */
+#define INTCSR_INTR_ASSERTED	0x800000	/*  read only, interrupt asserted */
 
 /****************************************************************************/
 /* AMCC - PCI non-volatile ram command register (byte 3 of master control/status register) */
@@ -153,7 +153,7 @@
 #define AINT_IMB_SELECT 	0x0000000c
 #define AINT_IMB_BYTE		0x00000003
 
-// these are bits from various different registers, needs cleanup XXX
+/* these are bits from various different registers, needs cleanup XXX */
 /* Enable Bus Mastering */
 #define EN_A2P_TRANSFERS	0x00000400
 /* FIFO Flag Reset */
diff --git a/drivers/staging/comedi/drivers/amplc_dio200.c b/drivers/staging/comedi/drivers/amplc_dio200.c
index 8555e272a86..744680059fa 100644
--- a/drivers/staging/comedi/drivers/amplc_dio200.c
+++ b/drivers/staging/comedi/drivers/amplc_dio200.c
@@ -205,6 +205,8 @@ is packed into a short value, one bit per requested channel, in the
 order they appear in the channel list.
 */
 
+#include <linux/interrupt.h>
+
 #include "../comedidev.h"
 
 #include "comedi_pci.h"
@@ -288,59 +290,59 @@ struct dio200_board {
 
 static const struct dio200_board dio200_boards[] = {
 	{
-	      name:	"pc212e",
-	      bustype:	isa_bustype,
-	      model:	pc212e_model,
-	      layout:	pc212_layout,
+	.name = "pc212e",
+	.bustype = isa_bustype,
+	.model = pc212e_model,
+	.layout = pc212_layout,
 		},
 	{
-	      name:	"pc214e",
-	      bustype:	isa_bustype,
-	      model:	pc214e_model,
-	      layout:	pc214_layout,
+	.name = "pc214e",
+	.bustype = isa_bustype,
+	.model = pc214e_model,
+	.layout = pc214_layout,
 		},
 	{
-	      name:	"pc215e",
-	      bustype:	isa_bustype,
-	      model:	pc215e_model,
-	      layout:	pc215_layout,
+	.name = "pc215e",
+	.bustype = isa_bustype,
+	.model = pc215e_model,
+	.layout = pc215_layout,
 		},
 #ifdef CONFIG_COMEDI_PCI
 	{
-	      name:	"pci215",
-	      devid:	PCI_DEVICE_ID_AMPLICON_PCI215,
-	      bustype:	pci_bustype,
-	      model:	pci215_model,
-	      layout:	pc215_layout,
+	.name = "pci215",
+	.devid = PCI_DEVICE_ID_AMPLICON_PCI215,
+	.bustype = pci_bustype,
+	.model = pci215_model,
+	.layout = pc215_layout,
 		},
 #endif
 	{
-	      name:	"pc218e",
-	      bustype:	isa_bustype,
-	      model:	pc218e_model,
-	      layout:	pc218_layout,
+	.name = "pc218e",
+	.bustype = isa_bustype,
+	.model = pc218e_model,
+	.layout = pc218_layout,
 		},
 	{
-	      name:	"pc272e",
-	      bustype:	isa_bustype,
-	      model:	pc272e_model,
-	      layout:	pc272_layout,
+	.name = "pc272e",
+	.bustype = isa_bustype,
+	.model = pc272e_model,
+	.layout = pc272_layout,
 		},
 #ifdef CONFIG_COMEDI_PCI
 	{
-	      name:	"pci272",
-	      devid:	PCI_DEVICE_ID_AMPLICON_PCI272,
-	      bustype:	pci_bustype,
-	      model:	pci272_model,
-	      layout:	pc272_layout,
+	.name = "pci272",
+	.devid = PCI_DEVICE_ID_AMPLICON_PCI272,
+	.bustype = pci_bustype,
+	.model = pci272_model,
+	.layout = pc272_layout,
 		},
 #endif
 #ifdef CONFIG_COMEDI_PCI
 	{
-	      name:	DIO200_DRIVER_NAME,
-	      devid:	PCI_DEVICE_ID_INVALID,
-	      bustype:	pci_bustype,
-	      model:	anypci_model,	/* wildcard */
+	.name = DIO200_DRIVER_NAME,
+	.devid = PCI_DEVICE_ID_INVALID,
+	.bustype = pci_bustype,
+	.model = anypci_model,	/* wildcard */
 		},
 #endif
 };
@@ -365,50 +367,50 @@ struct dio200_layout_struct {
 
 static const struct dio200_layout_struct dio200_layouts[] = {
 	[pc212_layout] = {
-	      n_subdevs:6,
-	      sdtype:	{sd_8255, sd_8254, sd_8254, sd_8254,
+	.n_subdevs = 6,
+	.sdtype = {sd_8255, sd_8254, sd_8254, sd_8254,
 					sd_8254,
 				sd_intr},
-	      sdinfo:	{0x00, 0x08, 0x0C, 0x10, 0x14,
+	.sdinfo = {0x00, 0x08, 0x0C, 0x10, 0x14,
 				0x3F},
-	      has_int_sce:1,
-	      has_clk_gat_sce:1,
+	.has_int_sce = 1,
+	.has_clk_gat_sce = 1,
 		},
 	[pc214_layout] = {
-	      n_subdevs:4,
-	      sdtype:	{sd_8255, sd_8255, sd_8254,
+	.n_subdevs = 4,
+	.sdtype = {sd_8255, sd_8255, sd_8254,
 				sd_intr},
-	      sdinfo:	{0x00, 0x08, 0x10, 0x01},
-	      has_int_sce:0,
-	      has_clk_gat_sce:0,
+	.sdinfo = {0x00, 0x08, 0x10, 0x01},
+	.has_int_sce = 0,
+	.has_clk_gat_sce = 0,
 		},
 	[pc215_layout] = {
-	      n_subdevs:5,
-	      sdtype:	{sd_8255, sd_8255, sd_8254,
+	.n_subdevs = 5,
+	.sdtype = {sd_8255, sd_8255, sd_8254,
 					sd_8254,
 				sd_intr},
-	      sdinfo:	{0x00, 0x08, 0x10, 0x14, 0x3F},
-	      has_int_sce:1,
-	      has_clk_gat_sce:1,
+	.sdinfo = {0x00, 0x08, 0x10, 0x14, 0x3F},
+	.has_int_sce = 1,
+	.has_clk_gat_sce = 1,
 		},
 	[pc218_layout] = {
-	      n_subdevs:7,
-	      sdtype:	{sd_8254, sd_8254, sd_8255, sd_8254,
+	.n_subdevs = 7,
+	.sdtype = {sd_8254, sd_8254, sd_8255, sd_8254,
 					sd_8254,
 				sd_intr},
-	      sdinfo:	{0x00, 0x04, 0x08, 0x0C, 0x10,
+	.sdinfo = {0x00, 0x04, 0x08, 0x0C, 0x10,
 					0x14,
 				0x3F},
-	      has_int_sce:1,
-	      has_clk_gat_sce:1,
+	.has_int_sce = 1,
+	.has_clk_gat_sce = 1,
 		},
 	[pc272_layout] = {
-	      n_subdevs:4,
-	      sdtype:	{sd_8255, sd_8255, sd_8255,
+	.n_subdevs = 4,
+	.sdtype = {sd_8255, sd_8255, sd_8255,
 				sd_intr},
-	      sdinfo:	{0x00, 0x08, 0x10, 0x3F},
-	      has_int_sce:1,
-	      has_clk_gat_sce:0,
+	.sdinfo = {0x00, 0x08, 0x10, 0x3F},
+	.has_int_sce = 1,
+	.has_clk_gat_sce = 0,
 		},
 };
 
@@ -473,16 +475,16 @@ struct dio200_subdev_intr {
  * the board, and also about the kernel module that contains
  * the device code.
  */
-static int dio200_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int dio200_detach(struct comedi_device * dev);
+static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int dio200_detach(struct comedi_device *dev);
 static struct comedi_driver driver_amplc_dio200 = {
-      driver_name:DIO200_DRIVER_NAME,
-      module:THIS_MODULE,
-      attach:dio200_attach,
-      detach:dio200_detach,
-      board_name:&dio200_boards[0].name,
-      offset:sizeof(struct dio200_board),
-      num_names:sizeof(dio200_boards) / sizeof(struct dio200_board),
+	.driver_name = DIO200_DRIVER_NAME,
+	.module = THIS_MODULE,
+	.attach = dio200_attach,
+	.detach = dio200_detach,
+	.board_name = &dio200_boards[0].name,
+	.offset = sizeof(struct dio200_board),
+	.num_names = ARRAY_SIZE(dio200_boards),
 };
 
 #ifdef CONFIG_COMEDI_PCI
@@ -497,7 +499,7 @@ COMEDI_INITCLEANUP(driver_amplc_dio200);
  */
 #ifdef CONFIG_COMEDI_PCI
 static int
-dio200_find_pci(struct comedi_device * dev, int bus, int slot,
+dio200_find_pci(struct comedi_device *dev, int bus, int slot,
 	struct pci_dev **pci_dev_p)
 {
 	struct pci_dev *pci_dev = NULL;
@@ -572,8 +574,8 @@ dio200_request_region(unsigned minor, unsigned long from, unsigned long extent)
  * 'insn_bits' function for an 'INTERRUPT' subdevice.
  */
 static int
-dio200_subdev_intr_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+dio200_subdev_intr_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	struct dio200_subdev_intr *subpriv = s->private;
 
@@ -591,7 +593,7 @@ dio200_subdev_intr_insn_bits(struct comedi_device * dev, struct comedi_subdevice
 /*
  * Called to stop acquisition for an 'INTERRUPT' subdevice.
  */
-static void dio200_stop_intr(struct comedi_device * dev, struct comedi_subdevice * s)
+static void dio200_stop_intr(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct dio200_subdev_intr *subpriv = s->private;
 
@@ -605,7 +607,7 @@ static void dio200_stop_intr(struct comedi_device * dev, struct comedi_subdevice
 /*
  * Called to start acquisition for an 'INTERRUPT' subdevice.
  */
-static int dio200_start_intr(struct comedi_device * dev, struct comedi_subdevice * s)
+static int dio200_start_intr(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	unsigned int n;
 	unsigned isn_bits;
@@ -641,7 +643,7 @@ static int dio200_start_intr(struct comedi_device * dev, struct comedi_subdevice
  * Internal trigger function to start acquisition for an 'INTERRUPT' subdevice.
  */
 static int
-dio200_inttrig_start_intr(struct comedi_device * dev, struct comedi_subdevice * s,
+dio200_inttrig_start_intr(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int trignum)
 {
 	struct dio200_subdev_intr *subpriv;
@@ -653,12 +655,12 @@ dio200_inttrig_start_intr(struct comedi_device * dev, struct comedi_subdevice *
 
 	subpriv = s->private;
 
-	comedi_spin_lock_irqsave(&subpriv->spinlock, flags);
+	spin_lock_irqsave(&subpriv->spinlock, flags);
 	s->async->inttrig = 0;
 	if (subpriv->active) {
 		event = dio200_start_intr(dev, s);
 	}
-	comedi_spin_unlock_irqrestore(&subpriv->spinlock, flags);
+	spin_unlock_irqrestore(&subpriv->spinlock, flags);
 
 	if (event) {
 		comedi_event(dev, s);
@@ -671,7 +673,7 @@ dio200_inttrig_start_intr(struct comedi_device * dev, struct comedi_subdevice *
  * This is called from the interrupt service routine to handle a read
  * scan on an 'INTERRUPT' subdevice.
  */
-static int dio200_handle_read_intr(struct comedi_device * dev, struct comedi_subdevice * s)
+static int dio200_handle_read_intr(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct dio200_subdev_intr *subpriv = s->private;
 	unsigned triggered;
@@ -682,7 +684,7 @@ static int dio200_handle_read_intr(struct comedi_device * dev, struct comedi_sub
 
 	triggered = 0;
 
-	comedi_spin_lock_irqsave(&subpriv->spinlock, flags);
+	spin_lock_irqsave(&subpriv->spinlock, flags);
 	oldevents = s->async->events;
 	if (subpriv->has_int_sce) {
 		/*
@@ -771,7 +773,7 @@ static int dio200_handle_read_intr(struct comedi_device * dev, struct comedi_sub
 			}
 		}
 	}
-	comedi_spin_unlock_irqrestore(&subpriv->spinlock, flags);
+	spin_unlock_irqrestore(&subpriv->spinlock, flags);
 
 	if (oldevents != s->async->events) {
 		comedi_event(dev, s);
@@ -783,16 +785,16 @@ static int dio200_handle_read_intr(struct comedi_device * dev, struct comedi_sub
 /*
  * 'cancel' function for an 'INTERRUPT' subdevice.
  */
-static int dio200_subdev_intr_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int dio200_subdev_intr_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct dio200_subdev_intr *subpriv = s->private;
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&subpriv->spinlock, flags);
+	spin_lock_irqsave(&subpriv->spinlock, flags);
 	if (subpriv->active) {
 		dio200_stop_intr(dev, s);
 	}
-	comedi_spin_unlock_irqrestore(&subpriv->spinlock, flags);
+	spin_unlock_irqrestore(&subpriv->spinlock, flags);
 
 	return 0;
 }
@@ -801,8 +803,8 @@ static int dio200_subdev_intr_cancel(struct comedi_device * dev, struct comedi_s
  * 'do_cmdtest' function for an 'INTERRUPT' subdevice.
  */
 static int
-dio200_subdev_intr_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+dio200_subdev_intr_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	unsigned int tmp;
@@ -907,14 +909,14 @@ dio200_subdev_intr_cmdtest(struct comedi_device * dev, struct comedi_subdevice *
 /*
  * 'do_cmd' function for an 'INTERRUPT' subdevice.
  */
-static int dio200_subdev_intr_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int dio200_subdev_intr_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct comedi_cmd *cmd = &s->async->cmd;
 	struct dio200_subdev_intr *subpriv = s->private;
 	unsigned long flags;
 	int event = 0;
 
-	comedi_spin_lock_irqsave(&subpriv->spinlock, flags);
+	spin_lock_irqsave(&subpriv->spinlock, flags);
 	subpriv->active = 1;
 
 	/* Set up end of acquisition. */
@@ -940,7 +942,7 @@ static int dio200_subdev_intr_cmd(struct comedi_device * dev, struct comedi_subd
 		event = dio200_start_intr(dev, s);
 		break;
 	}
-	comedi_spin_unlock_irqrestore(&subpriv->spinlock, flags);
+	spin_unlock_irqrestore(&subpriv->spinlock, flags);
 
 	if (event) {
 		comedi_event(dev, s);
@@ -953,7 +955,7 @@ static int dio200_subdev_intr_cmd(struct comedi_device * dev, struct comedi_subd
  * This function initializes an 'INTERRUPT' subdevice.
  */
 static int
-dio200_subdev_intr_init(struct comedi_device * dev, struct comedi_subdevice * s,
+dio200_subdev_intr_init(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned long iobase, unsigned valid_isns, int has_int_sce)
 {
 	struct dio200_subdev_intr *subpriv;
@@ -998,7 +1000,7 @@ dio200_subdev_intr_init(struct comedi_device * dev, struct comedi_subdevice * s,
  * This function cleans up an 'INTERRUPT' subdevice.
  */
 static void
-dio200_subdev_intr_cleanup(struct comedi_device * dev, struct comedi_subdevice * s)
+dio200_subdev_intr_cleanup(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct dio200_subdev_intr *subpriv = s->private;
 
@@ -1010,7 +1012,7 @@ dio200_subdev_intr_cleanup(struct comedi_device * dev, struct comedi_subdevice *
 /*
  * Interrupt service routine.
  */
-static irqreturn_t dio200_interrupt(int irq, void *d PT_REGS_ARG)
+static irqreturn_t dio200_interrupt(int irq, void *d)
 {
 	struct comedi_device *dev = d;
 	int handled;
@@ -1033,8 +1035,8 @@ static irqreturn_t dio200_interrupt(int irq, void *d PT_REGS_ARG)
  * Handle 'insn_read' for an '8254' counter subdevice.
  */
 static int
-dio200_subdev_8254_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+dio200_subdev_8254_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	struct dio200_subdev_8254 *subpriv = s->private;
 	int chan = CR_CHAN(insn->chanspec);
@@ -1048,8 +1050,8 @@ dio200_subdev_8254_read(struct comedi_device * dev, struct comedi_subdevice * s,
  * Handle 'insn_write' for an '8254' counter subdevice.
  */
 static int
-dio200_subdev_8254_write(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+dio200_subdev_8254_write(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	struct dio200_subdev_8254 *subpriv = s->private;
 	int chan = CR_CHAN(insn->chanspec);
@@ -1063,7 +1065,7 @@ dio200_subdev_8254_write(struct comedi_device * dev, struct comedi_subdevice * s
  * Set gate source for an '8254' counter subdevice channel.
  */
 static int
-dio200_set_gate_src(struct dio200_subdev_8254 * subpriv, unsigned int counter_number,
+dio200_set_gate_src(struct dio200_subdev_8254 *subpriv, unsigned int counter_number,
 	unsigned int gate_src)
 {
 	unsigned char byte;
@@ -1086,7 +1088,7 @@ dio200_set_gate_src(struct dio200_subdev_8254 * subpriv, unsigned int counter_nu
  * Get gate source for an '8254' counter subdevice channel.
  */
 static int
-dio200_get_gate_src(struct dio200_subdev_8254 * subpriv, unsigned int counter_number)
+dio200_get_gate_src(struct dio200_subdev_8254 *subpriv, unsigned int counter_number)
 {
 	if (!subpriv->has_clk_gat_sce)
 		return -1;
@@ -1100,7 +1102,7 @@ dio200_get_gate_src(struct dio200_subdev_8254 * subpriv, unsigned int counter_nu
  * Set clock source for an '8254' counter subdevice channel.
  */
 static int
-dio200_set_clock_src(struct dio200_subdev_8254 * subpriv, unsigned int counter_number,
+dio200_set_clock_src(struct dio200_subdev_8254 *subpriv, unsigned int counter_number,
 	unsigned int clock_src)
 {
 	unsigned char byte;
@@ -1123,8 +1125,8 @@ dio200_set_clock_src(struct dio200_subdev_8254 * subpriv, unsigned int counter_n
  * Get clock source for an '8254' counter subdevice channel.
  */
 static int
-dio200_get_clock_src(struct dio200_subdev_8254 * subpriv, unsigned int counter_number,
-	unsigned int * period_ns)
+dio200_get_clock_src(struct dio200_subdev_8254 *subpriv, unsigned int counter_number,
+	unsigned int *period_ns)
 {
 	unsigned clock_src;
 
@@ -1142,8 +1144,8 @@ dio200_get_clock_src(struct dio200_subdev_8254 * subpriv, unsigned int counter_n
  * Handle 'insn_config' for an '8254' counter subdevice.
  */
 static int
-dio200_subdev_8254_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+dio200_subdev_8254_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	struct dio200_subdev_8254 *subpriv = s->private;
 	int ret;
@@ -1194,7 +1196,7 @@ dio200_subdev_8254_config(struct comedi_device * dev, struct comedi_subdevice *
  * offset is the offset to the 8254 chip.
  */
 static int
-dio200_subdev_8254_init(struct comedi_device * dev, struct comedi_subdevice * s,
+dio200_subdev_8254_init(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned long iobase, unsigned offset, int has_clk_gat_sce)
 {
 	struct dio200_subdev_8254 *subpriv;
@@ -1247,7 +1249,7 @@ dio200_subdev_8254_init(struct comedi_device * dev, struct comedi_subdevice * s,
  * This function cleans up an '8254' counter subdevice.
  */
 static void
-dio200_subdev_8254_cleanup(struct comedi_device * dev, struct comedi_subdevice * s)
+dio200_subdev_8254_cleanup(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct dio200_subdev_intr *subpriv = s->private;
 
@@ -1262,7 +1264,7 @@ dio200_subdev_8254_cleanup(struct comedi_device * dev, struct comedi_subdevice *
  * in the driver structure, dev->board_ptr contains that
  * address.
  */
-static int dio200_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	unsigned long iobase = 0;
@@ -1280,7 +1282,8 @@ static int dio200_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	printk(KERN_DEBUG "comedi%d: %s: attach\n", dev->minor,
 		DIO200_DRIVER_NAME);
 
-	if ((ret = alloc_private(dev, sizeof(struct dio200_private))) < 0) {
+	ret = alloc_private(dev, sizeof(struct dio200_private));
+	if (ret < 0) {
 		printk(KERN_ERR "comedi%d: error! out of memory!\n",
 			dev->minor);
 		return ret;
@@ -1299,7 +1302,8 @@ static int dio200_attach(struct comedi_device * dev, struct comedi_devconfig * i
 		slot = it->options[1];
 		share_irq = 1;
 
-		if ((ret = dio200_find_pci(dev, bus, slot, &pci_dev)) < 0)
+		ret = dio200_find_pci(dev, bus, slot, &pci_dev);
+		if (ret < 0)
 			return ret;
 		devpriv->pci_dev = pci_dev;
 		break;
@@ -1337,7 +1341,9 @@ static int dio200_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	dev->iobase = iobase;
 
 	layout = thislayout;
-	if ((ret = alloc_subdevices(dev, layout->n_subdevs)) < 0) {
+
+	ret = alloc_subdevices(dev, layout->n_subdevs);
+	if (ret < 0) {
 		printk(KERN_ERR "comedi%d: error! out of memory!\n",
 			dev->minor);
 		return ret;
@@ -1392,7 +1398,7 @@ static int dio200_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	if (irq) {
 		unsigned long flags = share_irq ? IRQF_SHARED : 0;
 
-		if (comedi_request_irq(irq, dio200_interrupt, flags,
+		if (request_irq(irq, dio200_interrupt, flags,
 				DIO200_DRIVER_NAME, dev) >= 0) {
 			dev->irq = irq;
 		} else {
@@ -1429,7 +1435,7 @@ static int dio200_attach(struct comedi_device * dev, struct comedi_devconfig * i
  * allocated by _attach().  dev->private and dev->subdevices are
  * deallocated automatically by the core.
  */
-static int dio200_detach(struct comedi_device * dev)
+static int dio200_detach(struct comedi_device *dev)
 {
 	const struct dio200_layout_struct *layout;
 	unsigned n;
@@ -1438,7 +1444,7 @@ static int dio200_detach(struct comedi_device * dev)
 		DIO200_DRIVER_NAME);
 
 	if (dev->irq) {
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 	}
 	if (dev->subdevices) {
 		layout = thislayout;
diff --git a/drivers/staging/comedi/drivers/amplc_pc236.c b/drivers/staging/comedi/drivers/amplc_pc236.c
index 2027c75feac..48d7ccb4a3f 100644
--- a/drivers/staging/comedi/drivers/amplc_pc236.c
+++ b/drivers/staging/comedi/drivers/amplc_pc236.c
@@ -27,7 +27,7 @@ Driver: amplc_pc236
 Description: Amplicon PC36AT, PCI236
 Author: Ian Abbott <abbotti@mev.co.uk>
 Devices: [Amplicon] PC36AT (pc36at), PCI236 (pci236 or amplc_pc236)
-Updated: Wed, 22 Oct 2008 13:40:03 +0100
+Updated: Wed, 01 Apr 2009 15:41:25 +0100
 Status: works
 
 Configuration options - PC36AT:
@@ -45,13 +45,15 @@ as subdevice 0.
 
 Subdevice 1 pretends to be a digital input device, but it always returns
 0 when read. However, if you run a command with scan_begin_src=TRIG_EXT,
-a rising edge on port C bit 7 acts as an external trigger, which can be
+a rising edge on port C bit 3 acts as an external trigger, which can be
 used to wake up tasks.  This is like the comedi_parport device, but the
 only way to physically disable the interrupt on the PC36AT is to remove
 the IRQ jumper.  If no interrupt is connected, then subdevice 1 is
 unused.
 */
 
+#include <linux/interrupt.h>
+
 #include "../comedidev.h"
 
 #include "comedi_pci.h"
@@ -75,19 +77,19 @@ unused.
  * INTCSR values for PCI236.
  */
 /* Disable interrupt, also clear any interrupt there */
-#define PCI236_INTR_DISABLE ( PLX9052_INTCSR_LI1ENAB_DISABLED \
+#define PCI236_INTR_DISABLE (PLX9052_INTCSR_LI1ENAB_DISABLED \
         | PLX9052_INTCSR_LI1POL_HIGH \
         | PLX9052_INTCSR_LI2POL_HIGH \
         | PLX9052_INTCSR_PCIENAB_DISABLED \
         | PLX9052_INTCSR_LI1SEL_EDGE \
-        | PLX9052_INTCSR_LI1CLRINT_ASSERTED )
+        | PLX9052_INTCSR_LI1CLRINT_ASSERTED)
 /* Enable interrupt, also clear any interrupt there. */
-#define PCI236_INTR_ENABLE ( PLX9052_INTCSR_LI1ENAB_ENABLED \
+#define PCI236_INTR_ENABLE (PLX9052_INTCSR_LI1ENAB_ENABLED \
         | PLX9052_INTCSR_LI1POL_HIGH \
         | PLX9052_INTCSR_LI2POL_HIGH \
         | PLX9052_INTCSR_PCIENAB_ENABLED \
         | PLX9052_INTCSR_LI1SEL_EDGE \
-        | PLX9052_INTCSR_LI1CLRINT_ASSERTED )
+        | PLX9052_INTCSR_LI1CLRINT_ASSERTED)
 
 /*
  * Board descriptions for Amplicon PC36AT and PCI236.
@@ -105,27 +107,27 @@ struct pc236_board {
 };
 static const struct pc236_board pc236_boards[] = {
 	{
-	      name:	"pc36at",
-	      fancy_name:"PC36AT",
-	      bustype:	isa_bustype,
-	      model:	pc36at_model,
+	.name = "pc36at",
+	.fancy_name = "PC36AT",
+	.bustype = isa_bustype,
+	.model = pc36at_model,
 		},
 #ifdef CONFIG_COMEDI_PCI
 	{
-	      name:	"pci236",
-	      fancy_name:"PCI236",
-	      devid:	PCI_DEVICE_ID_AMPLICON_PCI236,
-	      bustype:	pci_bustype,
-	      model:	pci236_model,
+	.name = "pci236",
+	.fancy_name = "PCI236",
+	.devid = PCI_DEVICE_ID_AMPLICON_PCI236,
+	.bustype = pci_bustype,
+	.model = pci236_model,
 		},
 #endif
 #ifdef CONFIG_COMEDI_PCI
 	{
-	      name:	PC236_DRIVER_NAME,
-	      fancy_name:PC236_DRIVER_NAME,
-	      devid:	PCI_DEVICE_ID_INVALID,
-	      bustype:	pci_bustype,
-	      model:	anypci_model,	/* wildcard */
+	.name = PC236_DRIVER_NAME,
+	.fancy_name = PC236_DRIVER_NAME,
+	.devid = PCI_DEVICE_ID_INVALID,
+	.bustype = pci_bustype,
+	.model = anypci_model,	/* wildcard */
 		},
 #endif
 };
@@ -165,16 +167,16 @@ struct pc236_private {
  * the board, and also about the kernel module that contains
  * the device code.
  */
-static int pc236_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int pc236_detach(struct comedi_device * dev);
+static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int pc236_detach(struct comedi_device *dev);
 static struct comedi_driver driver_amplc_pc236 = {
-      driver_name:PC236_DRIVER_NAME,
-      module:THIS_MODULE,
-      attach:pc236_attach,
-      detach:pc236_detach,
-      board_name:&pc236_boards[0].name,
-      offset:sizeof(struct pc236_board),
-      num_names:sizeof(pc236_boards) / sizeof(struct pc236_board),
+	.driver_name = PC236_DRIVER_NAME,
+	.module = THIS_MODULE,
+	.attach = pc236_attach,
+	.detach = pc236_detach,
+	.board_name = &pc236_boards[0].name,
+	.offset = sizeof(struct pc236_board),
+	.num_names = ARRAY_SIZE(pc236_boards),
 };
 
 #ifdef CONFIG_COMEDI_PCI
@@ -185,16 +187,16 @@ COMEDI_INITCLEANUP(driver_amplc_pc236);
 
 static int pc236_request_region(unsigned minor, unsigned long from,
 	unsigned long extent);
-static void pc236_intr_disable(struct comedi_device * dev);
-static void pc236_intr_enable(struct comedi_device * dev);
-static int pc236_intr_check(struct comedi_device * dev);
-static int pc236_intr_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int pc236_intr_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd);
-static int pc236_intr_cmd(struct comedi_device * dev, struct comedi_subdevice * s);
-static int pc236_intr_cancel(struct comedi_device * dev, struct comedi_subdevice * s);
-static irqreturn_t pc236_interrupt(int irq, void *d PT_REGS_ARG);
+static void pc236_intr_disable(struct comedi_device *dev);
+static void pc236_intr_enable(struct comedi_device *dev);
+static int pc236_intr_check(struct comedi_device *dev);
+static int pc236_intr_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int pc236_intr_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd);
+static int pc236_intr_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
+static int pc236_intr_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
+static irqreturn_t pc236_interrupt(int irq, void *d);
 
 /*
  * This function looks for a PCI device matching the requested board name,
@@ -202,7 +204,7 @@ static irqreturn_t pc236_interrupt(int irq, void *d PT_REGS_ARG);
  */
 #ifdef CONFIG_COMEDI_PCI
 static int
-pc236_find_pci(struct comedi_device * dev, int bus, int slot,
+pc236_find_pci(struct comedi_device *dev, int bus, int slot,
 	struct pci_dev **pci_dev_p)
 {
 	struct pci_dev *pci_dev = NULL;
@@ -264,7 +266,7 @@ pc236_find_pci(struct comedi_device * dev, int bus, int slot,
  * in the driver structure, dev->board_ptr contains that
  * address.
  */
-static int pc236_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	unsigned long iobase = 0;
@@ -282,7 +284,8 @@ static int pc236_attach(struct comedi_device * dev, struct comedi_devconfig * it
  * Allocate the private structure area.  alloc_private() is a
  * convenient macro defined in comedidev.h.
  */
-	if ((ret = alloc_private(dev, sizeof(struct pc236_private))) < 0) {
+	ret = alloc_private(dev, sizeof(struct pc236_private));
+	if (ret < 0) {
 		printk(KERN_ERR "comedi%d: error! out of memory!\n",
 			dev->minor);
 		return ret;
@@ -300,7 +303,8 @@ static int pc236_attach(struct comedi_device * dev, struct comedi_devconfig * it
 		slot = it->options[1];
 		share_irq = 1;
 
-		if ((ret = pc236_find_pci(dev, bus, slot, &pci_dev)) < 0)
+		ret = pc236_find_pci(dev, bus, slot, &pci_dev);
+		if (ret < 0)
 			return ret;
 		devpriv->pci_dev = pci_dev;
 		break;
@@ -321,7 +325,9 @@ static int pc236_attach(struct comedi_device * dev, struct comedi_devconfig * it
 	/* Enable device and reserve I/O spaces. */
 #ifdef CONFIG_COMEDI_PCI
 	if (pci_dev) {
-		if ((ret = comedi_pci_enable(pci_dev, PC236_DRIVER_NAME)) < 0) {
+
+		ret = comedi_pci_enable(pci_dev, PC236_DRIVER_NAME);
+		if (ret < 0) {
 			printk(KERN_ERR
 				"comedi%d: error! cannot enable PCI device and request regions!\n",
 				dev->minor);
@@ -344,7 +350,8 @@ static int pc236_attach(struct comedi_device * dev, struct comedi_devconfig * it
  * Allocate the subdevice structures.  alloc_subdevice() is a
  * convenient macro defined in comedidev.h.
  */
-	if ((ret = alloc_subdevices(dev, 2)) < 0) {
+	ret = alloc_subdevices(dev, 2);
+	if (ret < 0) {
 		printk(KERN_ERR "comedi%d: error! out of memory!\n",
 			dev->minor);
 		return ret;
@@ -352,7 +359,8 @@ static int pc236_attach(struct comedi_device * dev, struct comedi_devconfig * it
 
 	s = dev->subdevices + 0;
 	/* digital i/o subdevice (8255) */
-	if ((ret = subdev_8255_init(dev, s, NULL, iobase)) < 0) {
+	ret = subdev_8255_init(dev, s, NULL, iobase);
+	if (ret < 0) {
 		printk(KERN_ERR "comedi%d: error! out of memory!\n",
 			dev->minor);
 		return ret;
@@ -364,7 +372,7 @@ static int pc236_attach(struct comedi_device * dev, struct comedi_devconfig * it
 	if (irq) {
 		unsigned long flags = share_irq ? IRQF_SHARED : 0;
 
-		if (comedi_request_irq(irq, pc236_interrupt, flags,
+		if (request_irq(irq, pc236_interrupt, flags,
 				PC236_DRIVER_NAME, dev) >= 0) {
 			dev->irq = irq;
 			s->type = COMEDI_SUBD_DI;
@@ -405,7 +413,7 @@ static int pc236_attach(struct comedi_device * dev, struct comedi_devconfig * it
  * allocated by _attach().  dev->private and dev->subdevices are
  * deallocated automatically by the core.
  */
-static int pc236_detach(struct comedi_device * dev)
+static int pc236_detach(struct comedi_device *dev)
 {
 	printk(KERN_DEBUG "comedi%d: %s: detach\n", dev->minor,
 		PC236_DRIVER_NAME);
@@ -413,7 +421,7 @@ static int pc236_detach(struct comedi_device * dev)
 		pc236_intr_disable(dev);
 	}
 	if (dev->irq)
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 	if (dev->subdevices) {
 		subdev_8255_cleanup(dev, dev->subdevices + 0);
 	}
@@ -459,17 +467,17 @@ static int pc236_request_region(unsigned minor, unsigned long from,
  * configured on subdevice 1) and to physically disable the interrupt
  * (not possible on the PC36AT, except by removing the IRQ jumper!).
  */
-static void pc236_intr_disable(struct comedi_device * dev)
+static void pc236_intr_disable(struct comedi_device *dev)
 {
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	spin_lock_irqsave(&dev->spinlock, flags);
 	devpriv->enable_irq = 0;
 #ifdef CONFIG_COMEDI_PCI
 	if (devpriv->lcr_iobase)
 		outl(PCI236_INTR_DISABLE, devpriv->lcr_iobase + PLX9052_INTCSR);
 #endif
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 }
 
 /*
@@ -477,17 +485,17 @@ static void pc236_intr_disable(struct comedi_device * dev)
  * configured on subdevice 1) and to physically enable the interrupt
  * (not possible on the PC36AT, except by (re)connecting the IRQ jumper!).
  */
-static void pc236_intr_enable(struct comedi_device * dev)
+static void pc236_intr_enable(struct comedi_device *dev)
 {
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	spin_lock_irqsave(&dev->spinlock, flags);
 	devpriv->enable_irq = 1;
 #ifdef CONFIG_COMEDI_PCI
 	if (devpriv->lcr_iobase)
 		outl(PCI236_INTR_ENABLE, devpriv->lcr_iobase + PLX9052_INTCSR);
 #endif
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 }
 
 /*
@@ -497,12 +505,12 @@ static void pc236_intr_enable(struct comedi_device * dev)
  * interrupt.
  * Returns 0 if the interrupt should be ignored.
  */
-static int pc236_intr_check(struct comedi_device * dev)
+static int pc236_intr_check(struct comedi_device *dev)
 {
 	int retval = 0;
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	spin_lock_irqsave(&dev->spinlock, flags);
 	if (devpriv->enable_irq) {
 		retval = 1;
 #ifdef CONFIG_COMEDI_PCI
@@ -519,7 +527,7 @@ static int pc236_intr_check(struct comedi_device * dev)
 		}
 #endif
 	}
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
 	return retval;
 }
@@ -528,8 +536,8 @@ static int pc236_intr_check(struct comedi_device * dev)
  * Input from subdevice 1.
  * Copied from the comedi_parport driver.
  */
-static int pc236_intr_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pc236_intr_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	data[1] = 0;
 	return 2;
@@ -539,8 +547,8 @@ static int pc236_intr_insn(struct comedi_device * dev, struct comedi_subdevice *
  * Subdevice 1 command test.
  * Copied from the comedi_parport driver.
  */
-static int pc236_intr_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int pc236_intr_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	int tmp;
@@ -617,7 +625,7 @@ static int pc236_intr_cmdtest(struct comedi_device * dev, struct comedi_subdevic
 /*
  * Subdevice 1 command.
  */
-static int pc236_intr_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pc236_intr_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	pc236_intr_enable(dev);
 
@@ -627,7 +635,7 @@ static int pc236_intr_cmd(struct comedi_device * dev, struct comedi_subdevice *
 /*
  * Subdevice 1 cancel command.
  */
-static int pc236_intr_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pc236_intr_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	pc236_intr_disable(dev);
 
@@ -638,7 +646,7 @@ static int pc236_intr_cancel(struct comedi_device * dev, struct comedi_subdevice
  * Interrupt service routine.
  * Based on the comedi_parport driver.
  */
-static irqreturn_t pc236_interrupt(int irq, void *d PT_REGS_ARG)
+static irqreturn_t pc236_interrupt(int irq, void *d)
 {
 	struct comedi_device *dev = d;
 	struct comedi_subdevice *s = dev->subdevices + 1;
diff --git a/drivers/staging/comedi/drivers/amplc_pc263.c b/drivers/staging/comedi/drivers/amplc_pc263.c
index 97ac4157ada..730b67743f0 100644
--- a/drivers/staging/comedi/drivers/amplc_pc263.c
+++ b/drivers/staging/comedi/drivers/amplc_pc263.c
@@ -74,27 +74,27 @@ struct pc263_board {
 };
 static const struct pc263_board pc263_boards[] = {
 	{
-	      name:	"pc263",
-	      fancy_name:"PC263",
-	      bustype:	isa_bustype,
-	      model:	pc263_model,
+	.name = "pc263",
+	.fancy_name = "PC263",
+	.bustype = isa_bustype,
+	.model = pc263_model,
 		},
 #ifdef CONFIG_COMEDI_PCI
 	{
-	      name:	"pci263",
-	      fancy_name:"PCI263",
-	      devid:	PCI_DEVICE_ID_AMPLICON_PCI263,
-	      bustype:	pci_bustype,
-	      model:	pci263_model,
+	.name = "pci263",
+	.fancy_name = "PCI263",
+	.devid = PCI_DEVICE_ID_AMPLICON_PCI263,
+	.bustype = pci_bustype,
+	.model = pci263_model,
 		},
 #endif
 #ifdef CONFIG_COMEDI_PCI
 	{
-	      name:	PC263_DRIVER_NAME,
-	      fancy_name:PC263_DRIVER_NAME,
-	      devid:	PCI_DEVICE_ID_INVALID,
-	      bustype:	pci_bustype,
-	      model:	anypci_model,	/* wildcard */
+	.name = PC263_DRIVER_NAME,
+	.fancy_name = PC263_DRIVER_NAME,
+	.devid = PCI_DEVICE_ID_INVALID,
+	.bustype = pci_bustype,
+	.model = anypci_model,	/* wildcard */
 		},
 #endif
 };
@@ -132,24 +132,24 @@ struct pc263_private {
  * the board, and also about the kernel module that contains
  * the device code.
  */
-static int pc263_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int pc263_detach(struct comedi_device * dev);
+static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int pc263_detach(struct comedi_device *dev);
 static struct comedi_driver driver_amplc_pc263 = {
-      driver_name:PC263_DRIVER_NAME,
-      module:THIS_MODULE,
-      attach:pc263_attach,
-      detach:pc263_detach,
-      board_name:&pc263_boards[0].name,
-      offset:sizeof(struct pc263_board),
-      num_names:sizeof(pc263_boards) / sizeof(struct pc263_board),
+	.driver_name = PC263_DRIVER_NAME,
+	.module = THIS_MODULE,
+	.attach = pc263_attach,
+	.detach = pc263_detach,
+	.board_name = &pc263_boards[0].name,
+	.offset = sizeof(struct pc263_board),
+	.num_names = ARRAY_SIZE(pc263_boards),
 };
 
 static int pc263_request_region(unsigned minor, unsigned long from,
 	unsigned long extent);
-static int pc263_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int pc263_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int pc263_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int pc263_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
 /*
  * This function looks for a PCI device matching the requested board name,
@@ -157,7 +157,7 @@ static int pc263_dio_insn_config(struct comedi_device * dev, struct comedi_subde
  */
 #ifdef CONFIG_COMEDI_PCI
 static int
-pc263_find_pci(struct comedi_device * dev, int bus, int slot,
+pc263_find_pci(struct comedi_device *dev, int bus, int slot,
 	struct pci_dev **pci_dev_p)
 {
 	struct pci_dev *pci_dev = NULL;
@@ -219,7 +219,7 @@ pc263_find_pci(struct comedi_device * dev, int bus, int slot,
  * in the driver structure, dev->board_ptr contains that
  * address.
  */
-static int pc263_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	unsigned long iobase = 0;
@@ -236,7 +236,8 @@ static int pc263_attach(struct comedi_device * dev, struct comedi_devconfig * it
  * convenient macro defined in comedidev.h.
  */
 #ifdef CONFIG_COMEDI_PCI
-	if ((ret = alloc_private(dev, sizeof(struct pc263_private))) < 0) {
+	ret = alloc_private(dev, sizeof(struct pc263_private));
+	if (ret < 0) {
 		printk(KERN_ERR "comedi%d: error! out of memory!\n",
 			dev->minor);
 		return ret;
@@ -252,7 +253,8 @@ static int pc263_attach(struct comedi_device * dev, struct comedi_devconfig * it
 		bus = it->options[0];
 		slot = it->options[1];
 
-		if ((ret = pc263_find_pci(dev, bus, slot, &pci_dev)) < 0)
+		ret = pc263_find_pci(dev, bus, slot, &pci_dev);
+		if (ret < 0)
 			return ret;
 		devpriv->pci_dev = pci_dev;
 		break;
@@ -273,7 +275,8 @@ static int pc263_attach(struct comedi_device * dev, struct comedi_devconfig * it
 	/* Enable device and reserve I/O spaces. */
 #ifdef CONFIG_COMEDI_PCI
 	if (pci_dev) {
-		if ((ret = comedi_pci_enable(pci_dev, PC263_DRIVER_NAME)) < 0) {
+		ret = comedi_pci_enable(pci_dev, PC263_DRIVER_NAME);
+		if (ret < 0) {
 			printk(KERN_ERR
 				"comedi%d: error! cannot enable PCI device and request regions!\n",
 				dev->minor);
@@ -294,7 +297,8 @@ static int pc263_attach(struct comedi_device * dev, struct comedi_devconfig * it
  * Allocate the subdevice structures.  alloc_subdevice() is a
  * convenient macro defined in comedidev.h.
  */
-	if ((ret = alloc_subdevices(dev, 1)) < 0) {
+	ret = alloc_subdevices(dev, 1);
+	if (ret < 0) {
 		printk(KERN_ERR "comedi%d: error! out of memory!\n",
 			dev->minor);
 		return ret;
@@ -303,7 +307,7 @@ static int pc263_attach(struct comedi_device * dev, struct comedi_devconfig * it
 	s = dev->subdevices + 0;
 	/* digital i/o subdevice */
 	s->type = COMEDI_SUBD_DIO;
-	s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_RT;
+	s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
 	s->n_chan = 16;
 	s->maxdata = 1;
 	s->range_table = &range_digital;
@@ -337,7 +341,7 @@ static int pc263_attach(struct comedi_device * dev, struct comedi_devconfig * it
  * allocated by _attach().  dev->private and dev->subdevices are
  * deallocated automatically by the core.
  */
-static int pc263_detach(struct comedi_device * dev)
+static int pc263_detach(struct comedi_device *dev)
 {
 	printk(KERN_DEBUG "comedi%d: %s: detach\n", dev->minor,
 		PC263_DRIVER_NAME);
@@ -387,8 +391,8 @@ static int pc263_request_region(unsigned minor, unsigned long from,
  * useful to applications if you implement the insn_bits interface.
  * This allows packed reading/writing of the DIO channels.  The
  * comedi core can convert between insn_bits and insn_read/write */
-static int pc263_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pc263_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -412,8 +416,8 @@ static int pc263_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevi
 	return 2;
 }
 
-static int pc263_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pc263_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 1)
 		return -EINVAL;
diff --git a/drivers/staging/comedi/drivers/amplc_pci224.c b/drivers/staging/comedi/drivers/amplc_pci224.c
index 770b9664893..d1a64e80cdd 100644
--- a/drivers/staging/comedi/drivers/amplc_pci224.c
+++ b/drivers/staging/comedi/drivers/amplc_pci224.c
@@ -103,6 +103,8 @@ Caveats:
      correctly.
 */
 
+#include <linux/interrupt.h>
+
 #include "../comedidev.h"
 
 #include "comedi_pci.h"
@@ -356,23 +358,23 @@ struct pci224_board {
 
 static const struct pci224_board pci224_boards[] = {
 	{
-	      name:	"pci224",
-	      devid: PCI_DEVICE_ID_AMPLICON_PCI224,
-	      model:	pci224_model,
-	      ao_chans:16,
-	      ao_bits:	12,
+	.name = "pci224",
+	.devid = PCI_DEVICE_ID_AMPLICON_PCI224,
+	.model = pci224_model,
+	.ao_chans = 16,
+	.ao_bits = 12,
 		},
 	{
-	      name:	"pci234",
-	      devid: PCI_DEVICE_ID_AMPLICON_PCI234,
-	      model:	pci234_model,
-	      ao_chans:4,
-	      ao_bits:	16,
+	.name = "pci234",
+	.devid = PCI_DEVICE_ID_AMPLICON_PCI234,
+	.model = pci234_model,
+	.ao_chans = 4,
+	.ao_bits = 16,
 		},
 	{
-	      name:	DRIVER_NAME,
-	      devid: PCI_DEVICE_ID_INVALID,
-	      model:	any_model,	/* wildcard */
+	.name = DRIVER_NAME,
+	.devid = PCI_DEVICE_ID_INVALID,
+	.model = any_model,	/* wildcard */
 		},
 };
 
@@ -426,16 +428,16 @@ struct pci224_private {
  * the board, and also about the kernel module that contains
  * the device code.
  */
-static int pci224_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int pci224_detach(struct comedi_device * dev);
+static int pci224_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int pci224_detach(struct comedi_device *dev);
 static struct comedi_driver driver_amplc_pci224 = {
-      driver_name:DRIVER_NAME,
-      module:THIS_MODULE,
-      attach:pci224_attach,
-      detach:pci224_detach,
-      board_name:&pci224_boards[0].name,
-      offset:sizeof(struct pci224_board),
-      num_names:sizeof(pci224_boards) / sizeof(struct pci224_board),
+	.driver_name = DRIVER_NAME,
+	.module = THIS_MODULE,
+	.attach = pci224_attach,
+	.detach = pci224_detach,
+	.board_name = &pci224_boards[0].name,
+	.offset = sizeof(struct pci224_board),
+	.num_names = ARRAY_SIZE(pci224_boards),
 };
 
 COMEDI_PCI_INITCLEANUP(driver_amplc_pci224, pci224_pci_table);
@@ -444,7 +446,7 @@ COMEDI_PCI_INITCLEANUP(driver_amplc_pci224, pci224_pci_table);
  * Called from the 'insn_write' function to perform a single write.
  */
 static void
-pci224_ao_set_data(struct comedi_device * dev, int chan, int range, unsigned int data)
+pci224_ao_set_data(struct comedi_device *dev, int chan, int range, unsigned int data)
 {
 	unsigned short mangled;
 
@@ -477,8 +479,8 @@ pci224_ao_set_data(struct comedi_device * dev, int chan, int range, unsigned int
  * 'insn_write' function for AO subdevice.
  */
 static int
-pci224_ao_insn_write(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+pci224_ao_insn_write(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan, range;
@@ -504,8 +506,8 @@ pci224_ao_insn_write(struct comedi_device * dev, struct comedi_subdevice * s,
  * command.
  */
 static int
-pci224_ao_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+pci224_ao_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan;
@@ -532,7 +534,7 @@ pci224_cascade_ns_to_timer(int osc_base, unsigned int *d1, unsigned int *d2,
 /*
  * Kills a command running on the AO subdevice.
  */
-static void pci224_ao_stop(struct comedi_device * dev, struct comedi_subdevice * s)
+static void pci224_ao_stop(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	unsigned long flags;
 
@@ -540,7 +542,7 @@ static void pci224_ao_stop(struct comedi_device * dev, struct comedi_subdevice *
 		return;
 	}
 
-	comedi_spin_lock_irqsave(&devpriv->ao_spinlock, flags);
+	spin_lock_irqsave(&devpriv->ao_spinlock, flags);
 	/* Kill the interrupts. */
 	devpriv->intsce = 0;
 	outb(0, devpriv->iobase1 + PCI224_INT_SCE);
@@ -556,10 +558,10 @@ static void pci224_ao_stop(struct comedi_device * dev, struct comedi_subdevice *
 	 * routine.
 	 */
 	while (devpriv->intr_running && devpriv->intr_cpuid != THISCPU) {
-		comedi_spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
-		comedi_spin_lock_irqsave(&devpriv->ao_spinlock, flags);
+		spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
+		spin_lock_irqsave(&devpriv->ao_spinlock, flags);
 	}
-	comedi_spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
+	spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
 	/* Reconfigure DAC for insn_write usage. */
 	outw(0, dev->iobase + PCI224_DACCEN);	/* Disable channels. */
 	devpriv->daccon = COMBINE(devpriv->daccon,
@@ -572,7 +574,7 @@ static void pci224_ao_stop(struct comedi_device * dev, struct comedi_subdevice *
 /*
  * Handles start of acquisition for the AO subdevice.
  */
-static void pci224_ao_start(struct comedi_device * dev, struct comedi_subdevice * s)
+static void pci224_ao_start(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct comedi_cmd *cmd = &s->async->cmd;
 	unsigned long flags;
@@ -585,21 +587,21 @@ static void pci224_ao_start(struct comedi_device * dev, struct comedi_subdevice
 		comedi_event(dev, s);
 	} else {
 		/* Enable interrupts. */
-		comedi_spin_lock_irqsave(&devpriv->ao_spinlock, flags);
+		spin_lock_irqsave(&devpriv->ao_spinlock, flags);
 		if (cmd->stop_src == TRIG_EXT) {
 			devpriv->intsce = PCI224_INTR_EXT | PCI224_INTR_DAC;
 		} else {
 			devpriv->intsce = PCI224_INTR_DAC;
 		}
 		outb(devpriv->intsce, devpriv->iobase1 + PCI224_INT_SCE);
-		comedi_spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
+		spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
 	}
 }
 
 /*
  * Handles interrupts from the DAC FIFO.
  */
-static void pci224_ao_handle_fifo(struct comedi_device * dev, struct comedi_subdevice * s)
+static void pci224_ao_handle_fifo(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct comedi_cmd *cmd = &s->async->cmd;
 	unsigned int num_scans;
@@ -653,7 +655,7 @@ static void pci224_ao_handle_fifo(struct comedi_device * dev, struct comedi_subd
 			/* Nothing left to put in the FIFO. */
 			pci224_ao_stop(dev, s);
 			s->async->events |= COMEDI_CB_OVERFLOW;
-			rt_printk(KERN_ERR "comedi%d: "
+			printk(KERN_ERR "comedi%d: "
 				"AO buffer underrun\n", dev->minor);
 		}
 	}
@@ -728,7 +730,7 @@ static void pci224_ao_handle_fifo(struct comedi_device * dev, struct comedi_subd
  * Internal trigger function to start acquisition on AO subdevice.
  */
 static int
-pci224_ao_inttrig_start(struct comedi_device * dev, struct comedi_subdevice * s,
+pci224_ao_inttrig_start(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int trignum)
 {
 	if (trignum != 0)
@@ -748,7 +750,7 @@ pci224_ao_inttrig_start(struct comedi_device * dev, struct comedi_subdevice * s,
  * 'do_cmdtest' function for AO subdevice.
  */
 static int
-pci224_ao_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s, struct comedi_cmd * cmd)
+pci224_ao_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_cmd *cmd)
 {
 	int err = 0;
 	unsigned int tmp;
@@ -1015,7 +1017,7 @@ pci224_ao_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s, struc
 /*
  * 'do_cmd' function for AO subdevice.
  */
-static int pci224_ao_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pci224_ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct comedi_cmd *cmd = &s->async->cmd;
 	int range;
@@ -1153,16 +1155,16 @@ static int pci224_ao_cmd(struct comedi_device * dev, struct comedi_subdevice * s
 	 */
 	switch (cmd->start_src) {
 	case TRIG_INT:
-		comedi_spin_lock_irqsave(&devpriv->ao_spinlock, flags);
+		spin_lock_irqsave(&devpriv->ao_spinlock, flags);
 		s->async->inttrig = &pci224_ao_inttrig_start;
-		comedi_spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
+		spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
 		break;
 	case TRIG_EXT:
 		/* Enable external interrupt trigger to start acquisition. */
-		comedi_spin_lock_irqsave(&devpriv->ao_spinlock, flags);
+		spin_lock_irqsave(&devpriv->ao_spinlock, flags);
 		devpriv->intsce |= PCI224_INTR_EXT;
 		outb(devpriv->intsce, devpriv->iobase1 + PCI224_INT_SCE);
-		comedi_spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
+		spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
 		break;
 	}
 
@@ -1172,7 +1174,7 @@ static int pci224_ao_cmd(struct comedi_device * dev, struct comedi_subdevice * s
 /*
  * 'cancel' function for AO subdevice.
  */
-static int pci224_ao_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pci224_ao_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	pci224_ao_stop(dev, s);
 	return 0;
@@ -1182,7 +1184,7 @@ static int pci224_ao_cancel(struct comedi_device * dev, struct comedi_subdevice
  * 'munge' data for AO command.
  */
 static void
-pci224_ao_munge(struct comedi_device * dev, struct comedi_subdevice * s, void *data,
+pci224_ao_munge(struct comedi_device *dev, struct comedi_subdevice *s, void *data,
 	unsigned int num_bytes, unsigned int chan_index)
 {
 	struct comedi_async *async = s->async;
@@ -1212,7 +1214,7 @@ pci224_ao_munge(struct comedi_device * dev, struct comedi_subdevice * s, void *d
 /*
  * Interrupt handler.
  */
-static irqreturn_t pci224_interrupt(int irq, void *d PT_REGS_ARG)
+static irqreturn_t pci224_interrupt(int irq, void *d)
 {
 	struct comedi_device *dev = d;
 	struct comedi_subdevice *s = &dev->subdevices[0];
@@ -1225,14 +1227,14 @@ static irqreturn_t pci224_interrupt(int irq, void *d PT_REGS_ARG)
 	intstat = inb(devpriv->iobase1 + PCI224_INT_SCE) & 0x3F;
 	if (intstat) {
 		retval = 1;
-		comedi_spin_lock_irqsave(&devpriv->ao_spinlock, flags);
+		spin_lock_irqsave(&devpriv->ao_spinlock, flags);
 		valid_intstat = devpriv->intsce & intstat;
 		/* Temporarily disable interrupt sources. */
 		curenab = devpriv->intsce & ~intstat;
 		outb(curenab, devpriv->iobase1 + PCI224_INT_SCE);
 		devpriv->intr_running = 1;
 		devpriv->intr_cpuid = THISCPU;
-		comedi_spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
+		spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
 		if (valid_intstat != 0) {
 			cmd = &s->async->cmd;
 			if (valid_intstat & PCI224_INTR_EXT) {
@@ -1248,13 +1250,13 @@ static irqreturn_t pci224_interrupt(int irq, void *d PT_REGS_ARG)
 			}
 		}
 		/* Reenable interrupt sources. */
-		comedi_spin_lock_irqsave(&devpriv->ao_spinlock, flags);
+		spin_lock_irqsave(&devpriv->ao_spinlock, flags);
 		if (curenab != devpriv->intsce) {
 			outb(devpriv->intsce,
 				devpriv->iobase1 + PCI224_INT_SCE);
 		}
 		devpriv->intr_running = 0;
-		comedi_spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
+		spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
 	}
 	return IRQ_RETVAL(retval);
 }
@@ -1264,7 +1266,7 @@ static irqreturn_t pci224_interrupt(int irq, void *d PT_REGS_ARG)
  * bus and slot.
  */
 static int
-pci224_find_pci(struct comedi_device * dev, int bus, int slot,
+pci224_find_pci(struct comedi_device *dev, int bus, int slot,
 	struct pci_dev **pci_dev_p)
 {
 	struct pci_dev *pci_dev = NULL;
@@ -1323,7 +1325,7 @@ pci224_find_pci(struct comedi_device * dev, int bus, int slot,
  * in the driver structure, dev->board_ptr contains that
  * address.
  */
-static int pci224_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int pci224_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	struct pci_dev *pci_dev;
@@ -1336,16 +1338,20 @@ static int pci224_attach(struct comedi_device * dev, struct comedi_devconfig * i
 
 	bus = it->options[0];
 	slot = it->options[1];
-	if ((ret = alloc_private(dev, sizeof(struct pci224_private))) < 0) {
+	ret = alloc_private(dev, sizeof(struct pci224_private));
+	if (ret < 0) {
 		printk(KERN_ERR "comedi%d: error! out of memory!\n",
 			dev->minor);
 		return ret;
 	}
-	if ((ret = pci224_find_pci(dev, bus, slot, &pci_dev)) < 0)
+
+	ret = pci224_find_pci(dev, bus, slot, &pci_dev);
+	if (ret < 0)
 		return ret;
-	devpriv->pci_dev = pci_dev;
 
-	if ((ret = comedi_pci_enable(pci_dev, DRIVER_NAME)) < 0) {
+	devpriv->pci_dev = pci_dev;
+	ret = comedi_pci_enable(pci_dev, DRIVER_NAME);
+	if (ret < 0) {
 		printk(KERN_ERR
 			"comedi%d: error! cannot enable PCI device "
 			"and request regions!\n", dev->minor);
@@ -1392,7 +1398,8 @@ static int pci224_attach(struct comedi_device * dev, struct comedi_devconfig * i
 		dev->iobase + PCI224_DACCON);
 
 	/* Allocate subdevices.  There is only one!  */
-	if ((ret = alloc_subdevices(dev, 1)) < 0) {
+	ret = alloc_subdevices(dev, 1);
+	if (ret < 0) {
 		printk(KERN_ERR "comedi%d: error! out of memory!\n",
 			dev->minor);
 		return ret;
@@ -1471,8 +1478,8 @@ static int pci224_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	dev->board_name = thisboard->name;
 
 	if (irq) {
-		ret = comedi_request_irq(irq, pci224_interrupt, IRQF_SHARED,
-			DRIVER_NAME, dev);
+		ret = request_irq(irq, pci224_interrupt, IRQF_SHARED,
+				  DRIVER_NAME, dev);
 		if (ret < 0) {
 			printk(KERN_ERR "comedi%d: error! "
 				"unable to allocate irq %u\n", dev->minor, irq);
@@ -1503,12 +1510,12 @@ static int pci224_attach(struct comedi_device * dev, struct comedi_devconfig * i
  * allocated by _attach().  dev->private and dev->subdevices are
  * deallocated automatically by the core.
  */
-static int pci224_detach(struct comedi_device * dev)
+static int pci224_detach(struct comedi_device *dev)
 {
 	printk(KERN_DEBUG "comedi%d: %s: detach\n", dev->minor, DRIVER_NAME);
 
 	if (dev->irq) {
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 	}
 	if (dev->subdevices) {
 		struct comedi_subdevice *s;
diff --git a/drivers/staging/comedi/drivers/amplc_pci230.c b/drivers/staging/comedi/drivers/amplc_pci230.c
index 0c9e5737e10..21133f068bf 100644
--- a/drivers/staging/comedi/drivers/amplc_pci230.c
+++ b/drivers/staging/comedi/drivers/amplc_pci230.c
@@ -187,9 +187,11 @@ Extra triggered scan functionality, interrupt bug-fix added by Steve Sharples.
 Support for PCI230+/260+, more triggered scan functionality, and workarounds
 for (or detection of) various hardware problems added by Ian Abbott.
 */
+
 #include "../comedidev.h"
 
 #include <linux/delay.h>
+#include <linux/interrupt.h>
 
 #include "comedi_pci.h"
 #include "8253.h"
@@ -455,46 +457,46 @@ struct pci230_board {
 };
 static const struct pci230_board pci230_boards[] = {
 	{
-	      name:	"pci230+",
-	      id:	PCI_DEVICE_ID_PCI230,
-	      ai_chans:16,
-	      ai_bits:	16,
-	      ao_chans:2,
-	      ao_bits:	12,
-	      have_dio:1,
-	      min_hwver:1,
+	.name = "pci230+",
+	.id = PCI_DEVICE_ID_PCI230,
+	.ai_chans = 16,
+	.ai_bits = 16,
+	.ao_chans = 2,
+	.ao_bits = 12,
+	.have_dio = 1,
+	.min_hwver = 1,
 		},
 	{
-	      name:	"pci260+",
-	      id:	PCI_DEVICE_ID_PCI260,
-	      ai_chans:16,
-	      ai_bits:	16,
-	      ao_chans:0,
-	      ao_bits:	0,
-	      have_dio:0,
-	      min_hwver:1,
+	.name = "pci260+",
+	.id = PCI_DEVICE_ID_PCI260,
+	.ai_chans = 16,
+	.ai_bits = 16,
+	.ao_chans = 0,
+	.ao_bits = 0,
+	.have_dio = 0,
+	.min_hwver = 1,
 		},
 	{
-	      name:	"pci230",
-	      id:	PCI_DEVICE_ID_PCI230,
-	      ai_chans:16,
-	      ai_bits:	12,
-	      ao_chans:2,
-	      ao_bits:	12,
-	      have_dio:1,
+	.name = "pci230",
+	.id = PCI_DEVICE_ID_PCI230,
+	.ai_chans = 16,
+	.ai_bits = 12,
+	.ao_chans = 2,
+	.ao_bits = 12,
+	.have_dio = 1,
 		},
 	{
-	      name:	"pci260",
-	      id:	PCI_DEVICE_ID_PCI260,
-	      ai_chans:16,
-	      ai_bits:	12,
-	      ao_chans:0,
-	      ao_bits:	0,
-	      have_dio:0,
+	.name = "pci260",
+	.id = PCI_DEVICE_ID_PCI260,
+	.ai_chans = 16,
+	.ai_bits = 12,
+	.ao_chans = 0,
+	.ao_bits = 0,
+	.have_dio = 0,
 		},
 	{
-	      name:	"amplc_pci230",	/* Wildcard matches any above */
-	      id:	PCI_DEVICE_ID_INVALID,
+	.name = "amplc_pci230",	/* Wildcard matches any above */
+	.id = PCI_DEVICE_ID_INVALID,
 		},
 };
 
@@ -601,46 +603,46 @@ static const unsigned char pci230_ao_bipolar[2] = { 0, 1 };
  * the board, and also about the kernel module that contains
  * the device code.
  */
-static int pci230_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int pci230_detach(struct comedi_device * dev);
+static int pci230_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int pci230_detach(struct comedi_device *dev);
 static struct comedi_driver driver_amplc_pci230 = {
-      driver_name:"amplc_pci230",
-      module:THIS_MODULE,
-      attach:pci230_attach,
-      detach:pci230_detach,
-      board_name:&pci230_boards[0].name,
-      offset:sizeof(pci230_boards[0]),
-      num_names:sizeof(pci230_boards) / sizeof(pci230_boards[0]),
+	.driver_name = "amplc_pci230",
+	.module = THIS_MODULE,
+	.attach = pci230_attach,
+	.detach = pci230_detach,
+	.board_name = &pci230_boards[0].name,
+	.offset = sizeof(pci230_boards[0]),
+	.num_names = ARRAY_SIZE(pci230_boards),
 };
 
 COMEDI_PCI_INITCLEANUP(driver_amplc_pci230, pci230_pci_table);
 
-static int pci230_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int pci230_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int pci230_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static void pci230_ct_setup_ns_mode(struct comedi_device * dev, unsigned int ct,
+static int pci230_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int pci230_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int pci230_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static void pci230_ct_setup_ns_mode(struct comedi_device *dev, unsigned int ct,
 	unsigned int mode, uint64_t ns, unsigned int round);
 static void pci230_ns_to_single_timer(unsigned int *ns, unsigned int round);
-static void pci230_cancel_ct(struct comedi_device * dev, unsigned int ct);
-static irqreturn_t pci230_interrupt(int irq, void *d PT_REGS_ARG);
-static int pci230_ao_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd);
-static int pci230_ao_cmd(struct comedi_device * dev, struct comedi_subdevice * s);
-static int pci230_ao_cancel(struct comedi_device * dev, struct comedi_subdevice * s);
-static void pci230_ao_stop(struct comedi_device * dev, struct comedi_subdevice * s);
-static void pci230_handle_ao_nofifo(struct comedi_device * dev, struct comedi_subdevice * s);
-static int pci230_handle_ao_fifo(struct comedi_device * dev, struct comedi_subdevice * s);
-static int pci230_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd);
-static int pci230_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s);
-static int pci230_ai_cancel(struct comedi_device * dev, struct comedi_subdevice * s);
-static void pci230_ai_stop(struct comedi_device * dev, struct comedi_subdevice * s);
-static void pci230_handle_ai(struct comedi_device * dev, struct comedi_subdevice * s);
-
-static short pci230_ai_read(struct comedi_device * dev)
+static void pci230_cancel_ct(struct comedi_device *dev, unsigned int ct);
+static irqreturn_t pci230_interrupt(int irq, void *d);
+static int pci230_ao_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd);
+static int pci230_ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
+static int pci230_ao_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
+static void pci230_ao_stop(struct comedi_device *dev, struct comedi_subdevice *s);
+static void pci230_handle_ao_nofifo(struct comedi_device *dev, struct comedi_subdevice *s);
+static int pci230_handle_ao_fifo(struct comedi_device *dev, struct comedi_subdevice *s);
+static int pci230_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd);
+static int pci230_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
+static int pci230_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
+static void pci230_ai_stop(struct comedi_device *dev, struct comedi_subdevice *s);
+static void pci230_handle_ai(struct comedi_device *dev, struct comedi_subdevice *s);
+
+static short pci230_ai_read(struct comedi_device *dev)
 {
 	/* Read sample. */
 	short data = (short) inw(dev->iobase + PCI230_ADCDATA);
@@ -658,7 +660,7 @@ static short pci230_ai_read(struct comedi_device * dev)
 	return data;
 }
 
-static inline unsigned short pci230_ao_mangle_datum(struct comedi_device * dev,
+static inline unsigned short pci230_ao_mangle_datum(struct comedi_device *dev,
 	short datum)
 {
 	/* If a bipolar range was specified, mangle it (straight binary->twos
@@ -674,7 +676,7 @@ static inline unsigned short pci230_ao_mangle_datum(struct comedi_device * dev,
 	return (unsigned short)datum;
 }
 
-static inline void pci230_ao_write_nofifo(struct comedi_device * dev, short datum,
+static inline void pci230_ao_write_nofifo(struct comedi_device *dev, short datum,
 	unsigned int chan)
 {
 	/* Store unmangled datum to be read back later. */
@@ -685,7 +687,7 @@ static inline void pci230_ao_write_nofifo(struct comedi_device * dev, short datu
 			? PCI230_DACOUT1 : PCI230_DACOUT2));
 }
 
-static inline void pci230_ao_write_fifo(struct comedi_device * dev, short datum,
+static inline void pci230_ao_write_fifo(struct comedi_device *dev, short datum,
 	unsigned int chan)
 {
 	/* Store unmangled datum to be read back later. */
@@ -702,7 +704,7 @@ static inline void pci230_ao_write_fifo(struct comedi_device * dev, short datum,
  * in the driver structure, dev->board_ptr contains that
  * address.
  */
-static int pci230_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int pci230_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	unsigned long iobase1, iobase2;
@@ -874,8 +876,8 @@ static int pci230_attach(struct comedi_device * dev, struct comedi_devconfig * i
 		dev->iobase + PCI230_ADCCON);
 
 	/* Register the interrupt handler. */
-	irq_hdl = comedi_request_irq(devpriv->pci_dev->irq, pci230_interrupt,
-		IRQF_SHARED, "amplc_pci230", dev);
+	irq_hdl = request_irq(devpriv->pci_dev->irq, pci230_interrupt,
+			      IRQF_SHARED, "amplc_pci230", dev);
 	if (irq_hdl < 0) {
 		printk("comedi%d: unable to register irq, "
 			"commands will not be available %d\n", dev->minor,
@@ -959,7 +961,7 @@ static int pci230_attach(struct comedi_device * dev, struct comedi_devconfig * i
  * allocated by _attach().  dev->private and dev->subdevices are
  * deallocated automatically by the core.
  */
-static int pci230_detach(struct comedi_device * dev)
+static int pci230_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: amplc_pci230: remove\n", dev->minor);
 
@@ -968,7 +970,7 @@ static int pci230_detach(struct comedi_device * dev)
 		subdev_8255_cleanup(dev, dev->subdevices + 2);
 
 	if (dev->irq)
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 
 	if (devpriv) {
 		if (devpriv->pci_dev) {
@@ -982,7 +984,7 @@ static int pci230_detach(struct comedi_device * dev)
 	return 0;
 }
 
-static int get_resources(struct comedi_device * dev, unsigned int res_mask,
+static int get_resources(struct comedi_device *dev, unsigned int res_mask,
 	unsigned char owner)
 {
 	int ok;
@@ -993,7 +995,7 @@ static int get_resources(struct comedi_device * dev, unsigned int res_mask,
 
 	ok = 1;
 	claimed = 0;
-	comedi_spin_lock_irqsave(&devpriv->res_spinlock, irqflags);
+	spin_lock_irqsave(&devpriv->res_spinlock, irqflags);
 	for (b = 1, i = 0; (i < NUM_RESOURCES)
 		&& (res_mask != 0); b <<= 1, i++) {
 		if ((res_mask & b) != 0) {
@@ -1014,24 +1016,24 @@ static int get_resources(struct comedi_device * dev, unsigned int res_mask,
 			}
 		}
 	}
-	comedi_spin_unlock_irqrestore(&devpriv->res_spinlock, irqflags);
+	spin_unlock_irqrestore(&devpriv->res_spinlock, irqflags);
 	return ok;
 }
 
-static inline int get_one_resource(struct comedi_device * dev, unsigned int resource,
+static inline int get_one_resource(struct comedi_device *dev, unsigned int resource,
 	unsigned char owner)
 {
 	return get_resources(dev, (1U << resource), owner);
 }
 
-static void put_resources(struct comedi_device * dev, unsigned int res_mask,
+static void put_resources(struct comedi_device *dev, unsigned int res_mask,
 	unsigned char owner)
 {
 	unsigned int i;
 	unsigned int b;
 	unsigned long irqflags;
 
-	comedi_spin_lock_irqsave(&devpriv->res_spinlock, irqflags);
+	spin_lock_irqsave(&devpriv->res_spinlock, irqflags);
 	for (b = 1, i = 0; (i < NUM_RESOURCES)
 		&& (res_mask != 0); b <<= 1, i++) {
 		if ((res_mask & b) != 0) {
@@ -1041,16 +1043,16 @@ static void put_resources(struct comedi_device * dev, unsigned int res_mask,
 			}
 		}
 	}
-	comedi_spin_unlock_irqrestore(&devpriv->res_spinlock, irqflags);
+	spin_unlock_irqrestore(&devpriv->res_spinlock, irqflags);
 }
 
-static inline void put_one_resource(struct comedi_device * dev, unsigned int resource,
+static inline void put_one_resource(struct comedi_device *dev, unsigned int resource,
 	unsigned char owner)
 {
 	put_resources(dev, (1U << resource), owner);
 }
 
-static inline void put_all_resources(struct comedi_device * dev, unsigned char owner)
+static inline void put_all_resources(struct comedi_device *dev, unsigned char owner)
 {
 	put_resources(dev, (1U << NUM_RESOURCES) - 1, owner);
 }
@@ -1058,8 +1060,8 @@ static inline void put_all_resources(struct comedi_device * dev, unsigned char o
 /*
  *  COMEDI_SUBD_AI instruction;
  */
-static int pci230_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci230_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int n, i;
 	unsigned int chan, range, aref;
@@ -1143,12 +1145,12 @@ static int pci230_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice *
 			status = inw(dev->iobase + PCI230_ADCCON);
 			if (!(status & PCI230_ADC_FIFO_EMPTY))
 				break;
-			comedi_udelay(1);
+			udelay(1);
 		}
 		if (i == TIMEOUT) {
-			/* rt_printk() should be used instead of printk()
+			/* printk() should be used instead of printk()
 			 * whenever the code can be called from real-time. */
-			rt_printk("timeout\n");
+			printk("timeout\n");
 			return -ETIMEDOUT;
 		}
 
@@ -1163,8 +1165,8 @@ static int pci230_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice *
 /*
  *  COMEDI_SUBD_AO instructions;
  */
-static int pci230_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci230_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan, range;
@@ -1191,8 +1193,8 @@ static int pci230_ao_winsn(struct comedi_device * dev, struct comedi_subdevice *
 
 /* AO subdevices should have a read insn as well as a write insn.
  * Usually this means copying a value stored in devpriv. */
-static int pci230_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci230_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
@@ -1203,8 +1205,8 @@ static int pci230_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice *
 	return i;
 }
 
-static int pci230_ao_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int pci230_ao_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	unsigned int tmp;
@@ -1416,20 +1418,20 @@ static int pci230_ao_cmdtest(struct comedi_device * dev, struct comedi_subdevice
 	return 0;
 }
 
-static int pci230_ao_inttrig_scan_begin(struct comedi_device * dev,
-	struct comedi_subdevice * s, unsigned int trig_num)
+static int pci230_ao_inttrig_scan_begin(struct comedi_device *dev,
+	struct comedi_subdevice *s, unsigned int trig_num)
 {
 	unsigned long irqflags;
 
 	if (trig_num != 0)
 		return -EINVAL;
 
-	comedi_spin_lock_irqsave(&devpriv->ao_stop_spinlock, irqflags);
+	spin_lock_irqsave(&devpriv->ao_stop_spinlock, irqflags);
 	if (test_bit(AO_CMD_STARTED, &devpriv->state)) {
 		/* Perform scan. */
 		if (devpriv->hwver < 2) {
 			/* Not using DAC FIFO. */
-			comedi_spin_unlock_irqrestore(&devpriv->
+			spin_unlock_irqrestore(&devpriv->
 				ao_stop_spinlock, irqflags);
 			pci230_handle_ao_nofifo(dev, s);
 			comedi_event(dev, s);
@@ -1437,18 +1439,18 @@ static int pci230_ao_inttrig_scan_begin(struct comedi_device * dev,
 			/* Using DAC FIFO. */
 			/* Read DACSWTRIG register to trigger conversion. */
 			inw(dev->iobase + PCI230P2_DACSWTRIG);
-			comedi_spin_unlock_irqrestore(&devpriv->
+			spin_unlock_irqrestore(&devpriv->
 				ao_stop_spinlock, irqflags);
 		}
 		/* Delay.  Should driver be responsible for this? */
 		/* XXX TODO: See if DAC busy bit can be used. */
-		comedi_udelay(8);
+		udelay(8);
 	}
 
 	return 1;
 }
 
-static void pci230_ao_start(struct comedi_device * dev, struct comedi_subdevice * s)
+static void pci230_ao_start(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct comedi_async *async = s->async;
 	struct comedi_cmd *cmd = &async->cmd;
@@ -1506,13 +1508,13 @@ static void pci230_ao_start(struct comedi_device * dev, struct comedi_subdevice
 			if (devpriv->hwver < 2) {
 				/* Not using DAC FIFO. */
 				/* Enable CT1 timer interrupt. */
-				comedi_spin_lock_irqsave(&devpriv->isr_spinlock,
+				spin_lock_irqsave(&devpriv->isr_spinlock,
 					irqflags);
 				devpriv->int_en |= PCI230_INT_ZCLK_CT1;
 				devpriv->ier |= PCI230_INT_ZCLK_CT1;
 				outb(devpriv->ier,
 					devpriv->iobase1 + PCI230_INT_SCE);
-				comedi_spin_unlock_irqrestore(&devpriv->
+				spin_unlock_irqrestore(&devpriv->
 					isr_spinlock, irqflags);
 			}
 			/* Set CT1 gate high to start counting. */
@@ -1525,18 +1527,18 @@ static void pci230_ao_start(struct comedi_device * dev, struct comedi_subdevice
 		}
 		if (devpriv->hwver >= 2) {
 			/* Using DAC FIFO.  Enable DAC FIFO interrupt. */
-			comedi_spin_lock_irqsave(&devpriv->isr_spinlock,
+			spin_lock_irqsave(&devpriv->isr_spinlock,
 				irqflags);
 			devpriv->int_en |= PCI230P2_INT_DAC;
 			devpriv->ier |= PCI230P2_INT_DAC;
 			outb(devpriv->ier, devpriv->iobase1 + PCI230_INT_SCE);
-			comedi_spin_unlock_irqrestore(&devpriv->isr_spinlock,
+			spin_unlock_irqrestore(&devpriv->isr_spinlock,
 				irqflags);
 		}
 	}
 }
 
-static int pci230_ao_inttrig_start(struct comedi_device * dev, struct comedi_subdevice * s,
+static int pci230_ao_inttrig_start(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int trig_num)
 {
 	if (trig_num != 0)
@@ -1548,7 +1550,7 @@ static int pci230_ao_inttrig_start(struct comedi_device * dev, struct comedi_sub
 	return 1;
 }
 
-static int pci230_ao_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pci230_ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	unsigned short daccon;
 	unsigned int range;
@@ -1624,7 +1626,7 @@ static int pci230_ao_cmd(struct comedi_device * dev, struct comedi_subdevice * s
 	return 0;
 }
 
-static int pci230_ai_check_scan_period(struct comedi_cmd * cmd)
+static int pci230_ai_check_scan_period(struct comedi_cmd *cmd)
 {
 	unsigned int min_scan_period, chanlist_len;
 	int err = 0;
@@ -1648,8 +1650,8 @@ static int pci230_ai_check_scan_period(struct comedi_cmd * cmd)
 	return !err;
 }
 
-static int pci230_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int pci230_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	unsigned int tmp;
@@ -2034,8 +2036,8 @@ static int pci230_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice
 	return 0;
 }
 
-static void pci230_ai_update_fifo_trigger_level(struct comedi_device * dev,
-	struct comedi_subdevice * s)
+static void pci230_ai_update_fifo_trigger_level(struct comedi_device *dev,
+	struct comedi_subdevice *s)
 {
 	struct comedi_cmd *cmd = &s->async->cmd;
 	unsigned int scanlen = cmd->scan_end_arg;
@@ -2078,7 +2080,7 @@ static void pci230_ai_update_fifo_trigger_level(struct comedi_device * dev,
 	}
 }
 
-static int pci230_ai_inttrig_convert(struct comedi_device * dev, struct comedi_subdevice * s,
+static int pci230_ai_inttrig_convert(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int trig_num)
 {
 	unsigned long irqflags;
@@ -2086,7 +2088,7 @@ static int pci230_ai_inttrig_convert(struct comedi_device * dev, struct comedi_s
 	if (trig_num != 0)
 		return -EINVAL;
 
-	comedi_spin_lock_irqsave(&devpriv->ai_stop_spinlock, irqflags);
+	spin_lock_irqsave(&devpriv->ai_stop_spinlock, irqflags);
 	if (test_bit(AI_CMD_STARTED, &devpriv->state)) {
 		unsigned int delayus;
 
@@ -2110,19 +2112,19 @@ static int pci230_ai_inttrig_convert(struct comedi_device * dev, struct comedi_s
 			/* single-ended or PCI230+/260+ */
 			delayus = 4;
 		}
-		comedi_spin_unlock_irqrestore(&devpriv->ai_stop_spinlock,
+		spin_unlock_irqrestore(&devpriv->ai_stop_spinlock,
 			irqflags);
-		comedi_udelay(delayus);
+		udelay(delayus);
 	} else {
-		comedi_spin_unlock_irqrestore(&devpriv->ai_stop_spinlock,
+		spin_unlock_irqrestore(&devpriv->ai_stop_spinlock,
 			irqflags);
 	}
 
 	return 1;
 }
 
-static int pci230_ai_inttrig_scan_begin(struct comedi_device * dev,
-	struct comedi_subdevice * s, unsigned int trig_num)
+static int pci230_ai_inttrig_scan_begin(struct comedi_device *dev,
+	struct comedi_subdevice *s, unsigned int trig_num)
 {
 	unsigned long irqflags;
 	unsigned char zgat;
@@ -2130,7 +2132,7 @@ static int pci230_ai_inttrig_scan_begin(struct comedi_device * dev,
 	if (trig_num != 0)
 		return -EINVAL;
 
-	comedi_spin_lock_irqsave(&devpriv->ai_stop_spinlock, irqflags);
+	spin_lock_irqsave(&devpriv->ai_stop_spinlock, irqflags);
 	if (test_bit(AI_CMD_STARTED, &devpriv->state)) {
 		/* Trigger scan by waggling CT0 gate source. */
 		zgat = GAT_CONFIG(0, GAT_GND);
@@ -2138,12 +2140,12 @@ static int pci230_ai_inttrig_scan_begin(struct comedi_device * dev,
 		zgat = GAT_CONFIG(0, GAT_VCC);
 		outb(zgat, devpriv->iobase1 + PCI230_ZGAT_SCE);
 	}
-	comedi_spin_unlock_irqrestore(&devpriv->ai_stop_spinlock, irqflags);
+	spin_unlock_irqrestore(&devpriv->ai_stop_spinlock, irqflags);
 
 	return 1;
 }
 
-static void pci230_ai_start(struct comedi_device * dev, struct comedi_subdevice * s)
+static void pci230_ai_start(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	unsigned long irqflags;
 	unsigned short conv;
@@ -2158,11 +2160,11 @@ static void pci230_ai_start(struct comedi_device * dev, struct comedi_subdevice
 		comedi_event(dev, s);
 	} else {
 		/* Enable ADC FIFO trigger level interrupt. */
-		comedi_spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
+		spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
 		devpriv->int_en |= PCI230_INT_ADC;
 		devpriv->ier |= PCI230_INT_ADC;
 		outb(devpriv->ier, devpriv->iobase1 + PCI230_INT_SCE);
-		comedi_spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
+		spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
 
 		/* Update conversion trigger source which is currently set
 		 * to CT2 output, which is currently stuck high. */
@@ -2280,7 +2282,7 @@ static void pci230_ai_start(struct comedi_device * dev, struct comedi_subdevice
 	}
 }
 
-static int pci230_ai_inttrig_start(struct comedi_device * dev, struct comedi_subdevice * s,
+static int pci230_ai_inttrig_start(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int trig_num)
 {
 	if (trig_num != 0)
@@ -2292,7 +2294,7 @@ static int pci230_ai_inttrig_start(struct comedi_device * dev, struct comedi_sub
 	return 1;
 }
 
-static int pci230_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pci230_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	unsigned int i, chan, range, diff;
 	unsigned int res_mask;
@@ -2424,7 +2426,7 @@ static int pci230_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s
 	 * FIFO reset (above) and the second FIFO reset (below). Setting the
 	 * channel gains and scan list _before_ the first FIFO reset also
 	 * helps, though only slightly. */
-	comedi_udelay(25);
+	udelay(25);
 
 	/* Reset FIFO again. */
 	outw(adccon | PCI230_ADC_FIFO_RESET, dev->iobase + PCI230_ADCCON);
@@ -2532,7 +2534,7 @@ static void pci230_ns_to_single_timer(unsigned int *ns, unsigned int round)
 	return;
 }
 
-static void pci230_ct_setup_ns_mode(struct comedi_device * dev, unsigned int ct,
+static void pci230_ct_setup_ns_mode(struct comedi_device *dev, unsigned int ct,
 	unsigned int mode, uint64_t ns, unsigned int round)
 {
 	unsigned int clk_src;
@@ -2551,7 +2553,7 @@ static void pci230_ct_setup_ns_mode(struct comedi_device * dev, unsigned int ct,
 	i8254_write(devpriv->iobase1 + PCI230_Z2_CT_BASE, 0, ct, count);
 }
 
-static void pci230_cancel_ct(struct comedi_device * dev, unsigned int ct)
+static void pci230_cancel_ct(struct comedi_device *dev, unsigned int ct)
 {
 	i8254_set_mode(devpriv->iobase1 + PCI230_Z2_CT_BASE, 0, ct,
 		I8254_MODE1);
@@ -2559,7 +2561,7 @@ static void pci230_cancel_ct(struct comedi_device * dev, unsigned int ct)
 }
 
 /* Interrupt handler */
-static irqreturn_t pci230_interrupt(int irq, void *d PT_REGS_ARG)
+static irqreturn_t pci230_interrupt(int irq, void *d)
 {
 	unsigned char status_int, valid_status_int;
 	struct comedi_device *dev = (struct comedi_device *) d;
@@ -2573,7 +2575,7 @@ static irqreturn_t pci230_interrupt(int irq, void *d PT_REGS_ARG)
 		return IRQ_NONE;
 	}
 
-	comedi_spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
+	spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
 	valid_status_int = devpriv->int_en & status_int;
 	/* Disable triggered interrupts.
 	 * (Only those interrupts that need re-enabling, are, later in the
@@ -2582,7 +2584,7 @@ static irqreturn_t pci230_interrupt(int irq, void *d PT_REGS_ARG)
 	outb(devpriv->ier, devpriv->iobase1 + PCI230_INT_SCE);
 	devpriv->intr_running = 1;
 	devpriv->intr_cpuid = THISCPU;
-	comedi_spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
+	spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
 
 	/*
 	 * Check the source of interrupt and handle it.
@@ -2611,18 +2613,18 @@ static irqreturn_t pci230_interrupt(int irq, void *d PT_REGS_ARG)
 	}
 
 	/* Reenable interrupts. */
-	comedi_spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
+	spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
 	if (devpriv->ier != devpriv->int_en) {
 		devpriv->ier = devpriv->int_en;
 		outb(devpriv->ier, devpriv->iobase1 + PCI230_INT_SCE);
 	}
 	devpriv->intr_running = 0;
-	comedi_spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
+	spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
 
 	return IRQ_HANDLED;
 }
 
-static void pci230_handle_ao_nofifo(struct comedi_device * dev, struct comedi_subdevice * s)
+static void pci230_handle_ao_nofifo(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	short data;
 	int i, ret;
@@ -2659,7 +2661,7 @@ static void pci230_handle_ao_nofifo(struct comedi_device * dev, struct comedi_su
 
 /* Loads DAC FIFO (if using it) from buffer. */
 /* Returns 0 if AO finished due to completion or error, 1 if still going. */
-static int pci230_handle_ao_fifo(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pci230_handle_ao_fifo(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct comedi_async *async = s->async;
 	struct comedi_cmd *cmd = &async->cmd;
@@ -2762,7 +2764,7 @@ static int pci230_handle_ao_fifo(struct comedi_device * dev, struct comedi_subde
 	return running;
 }
 
-static void pci230_handle_ai(struct comedi_device * dev, struct comedi_subdevice * s)
+static void pci230_handle_ai(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	unsigned int events = 0;
 	unsigned int status_fifo;
@@ -2861,16 +2863,16 @@ static void pci230_handle_ai(struct comedi_device * dev, struct comedi_subdevice
 	}
 }
 
-static void pci230_ao_stop(struct comedi_device * dev, struct comedi_subdevice * s)
+static void pci230_ao_stop(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	unsigned long irqflags;
 	unsigned char intsrc;
 	int started;
 	struct comedi_cmd *cmd;
 
-	comedi_spin_lock_irqsave(&devpriv->ao_stop_spinlock, irqflags);
+	spin_lock_irqsave(&devpriv->ao_stop_spinlock, irqflags);
 	started = test_and_clear_bit(AO_CMD_STARTED, &devpriv->state);
-	comedi_spin_unlock_irqrestore(&devpriv->ao_stop_spinlock, irqflags);
+	spin_unlock_irqrestore(&devpriv->ao_stop_spinlock, irqflags);
 	if (!started) {
 		return;
 	}
@@ -2891,17 +2893,17 @@ static void pci230_ao_stop(struct comedi_device * dev, struct comedi_subdevice *
 	}
 	/* Disable interrupt and wait for interrupt routine to finish running
 	 * unless we are called from the interrupt routine. */
-	comedi_spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
+	spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
 	devpriv->int_en &= ~intsrc;
 	while (devpriv->intr_running && devpriv->intr_cpuid != THISCPU) {
-		comedi_spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
-		comedi_spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
+		spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
+		spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
 	}
 	if (devpriv->ier != devpriv->int_en) {
 		devpriv->ier = devpriv->int_en;
 		outb(devpriv->ier, devpriv->iobase1 + PCI230_INT_SCE);
 	}
-	comedi_spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
+	spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
 
 	if (devpriv->hwver >= 2) {
 		/* Using DAC FIFO.  Reset FIFO, clear underrun error,
@@ -2916,21 +2918,21 @@ static void pci230_ao_stop(struct comedi_device * dev, struct comedi_subdevice *
 	put_all_resources(dev, OWNER_AOCMD);
 }
 
-static int pci230_ao_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pci230_ao_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	pci230_ao_stop(dev, s);
 	return 0;
 }
 
-static void pci230_ai_stop(struct comedi_device * dev, struct comedi_subdevice * s)
+static void pci230_ai_stop(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	unsigned long irqflags;
 	struct comedi_cmd *cmd;
 	int started;
 
-	comedi_spin_lock_irqsave(&devpriv->ai_stop_spinlock, irqflags);
+	spin_lock_irqsave(&devpriv->ai_stop_spinlock, irqflags);
 	started = test_and_clear_bit(AI_CMD_STARTED, &devpriv->state);
-	comedi_spin_unlock_irqrestore(&devpriv->ai_stop_spinlock, irqflags);
+	spin_unlock_irqrestore(&devpriv->ai_stop_spinlock, irqflags);
 	if (!started) {
 		return;
 	}
@@ -2945,19 +2947,19 @@ static void pci230_ai_stop(struct comedi_device * dev, struct comedi_subdevice *
 		pci230_cancel_ct(dev, 0);
 	}
 
-	comedi_spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
+	spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
 	/* Disable ADC interrupt and wait for interrupt routine to finish
 	 * running unless we are called from the interrupt routine. */
 	devpriv->int_en &= ~PCI230_INT_ADC;
 	while (devpriv->intr_running && devpriv->intr_cpuid != THISCPU) {
-		comedi_spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
-		comedi_spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
+		spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
+		spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
 	}
 	if (devpriv->ier != devpriv->int_en) {
 		devpriv->ier = devpriv->int_en;
 		outb(devpriv->ier, devpriv->iobase1 + PCI230_INT_SCE);
 	}
-	comedi_spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
+	spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
 
 	/* Reset FIFO, disable FIFO and set start conversion source to none.
 	 * Keep se/diff and bip/uni settings */
@@ -2970,7 +2972,7 @@ static void pci230_ai_stop(struct comedi_device * dev, struct comedi_subdevice *
 	put_all_resources(dev, OWNER_AICMD);
 }
 
-static int pci230_ai_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pci230_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	pci230_ai_stop(dev, s);
 	return 0;
diff --git a/drivers/staging/comedi/drivers/c6xdigio.c b/drivers/staging/comedi/drivers/c6xdigio.c
index 2efffb14610..b204793040e 100644
--- a/drivers/staging/comedi/drivers/c6xdigio.c
+++ b/drivers/staging/comedi/drivers/c6xdigio.c
@@ -77,7 +77,7 @@ struct pwmbitstype {
 	unsigned sb4:2;
 };
 union pwmcmdtype {
-	unsigned cmd;		// assuming here that int is 32bit
+	unsigned cmd;		/*  assuming here that int is 32bit */
 	struct pwmbitstype bits;
 };
 struct encbitstype {
@@ -97,20 +97,20 @@ union encvaluetype {
 
 #define C6XDIGIO_TIME_OUT 20
 
-static int c6xdigio_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int c6xdigio_detach(struct comedi_device * dev);
+static int c6xdigio_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int c6xdigio_detach(struct comedi_device *dev);
 struct comedi_driver driver_c6xdigio = {
-      driver_name:"c6xdigio",
-      module:THIS_MODULE,
-      attach:c6xdigio_attach,
-      detach:c6xdigio_detach,
+	.driver_name = "c6xdigio",
+	.module = THIS_MODULE,
+	.attach = c6xdigio_attach,
+	.detach = c6xdigio_detach,
 };
 
 static void C6X_pwmInit(unsigned long baseAddr)
 {
 	int timeout = 0;
 
-//printk("Inside C6X_pwmInit\n");
+/* printk("Inside C6X_pwmInit\n"); */
 
 	WriteByteToHwPort(baseAddr, 0x70);
 	while (((ReadByteFromHwPort(baseAddr + 1) & 0x80) == 0)
@@ -148,7 +148,7 @@ static void C6X_pwmOutput(unsigned long baseAddr, unsigned channel, int value)
 	int timeout = 0;
 	unsigned tmp;
 
-	//printk("Inside C6X_pwmOutput\n");
+	/* printk("Inside C6X_pwmOutput\n"); */
 
 	pwm.cmd = value;
 	if (pwm.cmd > 498)
@@ -158,7 +158,7 @@ static void C6X_pwmOutput(unsigned long baseAddr, unsigned channel, int value)
 
 	if (channel == 0) {
 		ppcmd = 0x28;
-	} else {		// if channel == 1
+	} else {		/*  if channel == 1 */
 		ppcmd = 0x30;
 	}			/* endif */
 
@@ -216,7 +216,7 @@ static int C6X_encInput(unsigned long baseAddr, unsigned channel)
 	int timeout = 0;
 	int tmp;
 
-	//printk("Inside C6X_encInput\n");
+	/* printk("Inside C6X_encInput\n"); */
 
 	enc.value = 0;
 	if (channel == 0) {
@@ -304,14 +304,14 @@ static int C6X_encInput(unsigned long baseAddr, unsigned channel)
 		timeout++;
 	}
 
-	return (enc.value ^ 0x800000);
+	return enc.value ^ 0x800000;
 }
 
 static void C6X_encResetAll(unsigned long baseAddr)
 {
 	unsigned timeout = 0;
 
-//printk("Inside C6X_encResetAll\n");
+/* printk("Inside C6X_encResetAll\n"); */
 
 	WriteByteToHwPort(baseAddr, 0x68);
 	while (((ReadByteFromHwPort(baseAddr + 1) & 0x80) == 0)
@@ -338,20 +338,20 @@ static void C6X_encResetAll(unsigned long baseAddr)
 	}
 }
 
-static int c6xdigio_pwmo_insn_read(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+static int c6xdigio_pwmo_insn_read(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 	printk("c6xdigio_pwmo_insn_read %x\n", insn->n);
 	return insn->n;
 }
 
-static int c6xdigio_pwmo_insn_write(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+static int c6xdigio_pwmo_insn_write(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
 
-	//  printk("c6xdigio_pwmo_insn_write %x\n", insn->n);
+	/*   printk("c6xdigio_pwmo_insn_write %x\n", insn->n); */
 	for (i = 0; i < insn->n; i++) {
 		C6X_pwmOutput(dev->iobase, chan, data[i]);
 		/*    devpriv->ao_readback[chan] = data[i]; */
@@ -359,32 +359,30 @@ static int c6xdigio_pwmo_insn_write(struct comedi_device * dev,
 	return i;
 }
 
-//static int c6xdigio_ei_init_insn_read(struct comedi_device *dev,
-//                                 struct comedi_subdevice *s,
-//                                 struct comedi_insn *insn,
-//                                 unsigned int *data)
-//{
-//  printk("c6xdigio_ei_init_insn_read %x\n", insn->n);
-//  return insn->n;
-//}
-
-//static int c6xdigio_ei_init_insn_write(struct comedi_device *dev,
-//                                 struct comedi_subdevice *s,
-//                                 struct comedi_insn *insn,
-//                                 unsigned int *data)
-//{
-//  int i;
-//  int chan = CR_CHAN(insn->chanspec);
-//
-//  C6X_encResetAll( dev->iobase );
-//
-//  return insn->n;
-//}
-
-static int c6xdigio_ei_insn_read(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+/* static int c6xdigio_ei_init_insn_read(struct comedi_device *dev, */
+/* struct comedi_subdevice *s, */
+/* struct comedi_insn *insn, */
+/* unsigned int *data) */
+/* { */
+/* printk("c6xdigio_ei_init_insn_read %x\n", insn->n); */
+/* return insn->n; */
+/* } */
+
+/* static int c6xdigio_ei_init_insn_write(struct comedi_device *dev, */
+/* struct comedi_subdevice *s, */
+/* struct comedi_insn *insn, */
+/* unsigned int *data) */
+/* { */
+/* int i; */
+/* int chan = CR_CHAN(insn->chanspec); */
+/*  *//* C6X_encResetAll( dev->iobase ); */
+/*  *//* return insn->n; */
+/* } */
+
+static int c6xdigio_ei_insn_read(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
-	//  printk("c6xdigio_ei__insn_read %x\n", insn->n);
+	/*   printk("c6xdigio_ei__insn_read %x\n", insn->n); */
 	int n;
 	int chan = CR_CHAN(insn->chanspec);
 
@@ -395,19 +393,19 @@ static int c6xdigio_ei_insn_read(struct comedi_device * dev,
 	return n;
 }
 
-static void board_init(struct comedi_device * dev)
+static void board_init(struct comedi_device *dev)
 {
 
-	//printk("Inside board_init\n");
+	/* printk("Inside board_init\n"); */
 
 	C6X_pwmInit(dev->iobase);
 	C6X_encResetAll(dev->iobase);
 
 }
 
-//static void board_halt(struct comedi_device *dev) {
-//  C6X_pwmInit(dev->iobase);
-//}
+/* static void board_halt(struct comedi_device *dev) { */
+/* C6X_pwmInit(dev->iobase); */
+/* } */
 
 /*
    options[0] - I/O port
@@ -417,9 +415,9 @@ static void board_init(struct comedi_device * dev)
 
 static const struct pnp_device_id c6xdigio_pnp_tbl[] = {
 	/* Standard LPT Printer Port */
-	{.id = "PNP0400",.driver_data = 0},
+	{.id = "PNP0400", .driver_data = 0},
 	/* ECP Printer Port */
-	{.id = "PNP0401",.driver_data = 0},
+	{.id = "PNP0401", .driver_data = 0},
 	{}
 };
 
@@ -428,7 +426,7 @@ static struct pnp_driver c6xdigio_pnp_driver = {
 	.id_table = c6xdigio_pnp_tbl,
 };
 
-static int c6xdigio_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int c6xdigio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int result = 0;
 	unsigned long iobase;
@@ -444,11 +442,11 @@ static int c6xdigio_attach(struct comedi_device * dev, struct comedi_devconfig *
 	dev->iobase = iobase;
 	dev->board_name = "c6xdigio";
 
-	result = alloc_subdevices(dev, 2);	// 3 with encoder_init write
+	result = alloc_subdevices(dev, 2);	/*  3 with encoder_init write */
 	if (result < 0)
 		return result;
 
-	// Make sure that PnP ports gets activated
+	/*  Make sure that PnP ports gets activated */
 	pnp_register_driver(&c6xdigio_pnp_driver);
 
 	irq = it->options[1];
@@ -460,14 +458,14 @@ static int c6xdigio_attach(struct comedi_device * dev, struct comedi_devconfig *
 
 	s = dev->subdevices + 0;
 	/* pwm output subdevice */
-	s->type = COMEDI_SUBD_AO;	// Not sure what to put here
+	s->type = COMEDI_SUBD_AO;	/*  Not sure what to put here */
 	s->subdev_flags = SDF_WRITEABLE;
 	s->n_chan = 2;
 	/*      s->trig[0] = c6xdigio_pwmo; */
 	s->insn_read = c6xdigio_pwmo_insn_read;
 	s->insn_write = c6xdigio_pwmo_insn_write;
 	s->maxdata = 500;
-	s->range_table = &range_bipolar10;	// A suitable lie
+	s->range_table = &range_bipolar10;	/*  A suitable lie */
 
 	s = dev->subdevices + 1;
 	/* encoder (counter) subdevice */
@@ -479,27 +477,27 @@ static int c6xdigio_attach(struct comedi_device * dev, struct comedi_devconfig *
 	s->maxdata = 0xffffff;
 	s->range_table = &range_unknown;
 
-	//          s = dev->subdevices + 2;
-	//      /* pwm output subdevice */
-	//      s->type = COMEDI_SUBD_COUNTER;  // Not sure what to put here
-	//      s->subdev_flags = SDF_WRITEABLE;
-	//      s->n_chan = 1;
-	//      /* s->trig[0] = c6xdigio_ei_init; */
-	//      s->insn_read = c6xdigio_ei_init_insn_read;
-	//      s->insn_write = c6xdigio_ei_init_insn_write;
-	//      s->maxdata = 0xFFFF;  // Really just a don't care
-	//      s->range_table = &range_unknown; // Not sure what to put here
-
-	// I will call this init anyway but more than likely the DSP board will not be connect
-	// when device driver is loaded.
+	/*           s = dev->subdevices + 2; */
+	      /* pwm output subdevice */
+	/*       s->type = COMEDI_SUBD_COUNTER;  // Not sure what to put here */
+	/*       s->subdev_flags = SDF_WRITEABLE; */
+	/*       s->n_chan = 1; */
+	/*       s->trig[0] = c6xdigio_ei_init; */
+	/*       s->insn_read = c6xdigio_ei_init_insn_read; */
+	/*       s->insn_write = c6xdigio_ei_init_insn_write; */
+	/*       s->maxdata = 0xFFFF;  // Really just a don't care */
+	/*       s->range_table = &range_unknown; // Not sure what to put here */
+
+	/*  I will call this init anyway but more than likely the DSP board will not be connect */
+	/*  when device driver is loaded. */
 	board_init(dev);
 
 	return 0;
 }
 
-static int c6xdigio_detach(struct comedi_device * dev)
+static int c6xdigio_detach(struct comedi_device *dev)
 {
-//  board_halt(dev);  // may not need this
+/* board_halt(dev);  may not need this */
 
 	printk("comedi%d: c6xdigio: remove\n", dev->minor);
 
@@ -508,7 +506,7 @@ static int c6xdigio_detach(struct comedi_device * dev)
 	}
 	if (dev->irq) {
 		free_irq(dev->irq, dev);
-	}			// Not using IRQ so I am not sure if I need this
+	}			/*  Not using IRQ so I am not sure if I need this */
 	pnp_unregister_driver(&c6xdigio_pnp_driver);
 
 	return 0;
diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c
index 0bfe4c954eb..7af245b42e5 100644
--- a/drivers/staging/comedi/drivers/cb_das16_cs.c
+++ b/drivers/staging/comedi/drivers/cb_das16_cs.c
@@ -31,6 +31,7 @@ Status: experimental
 
 */
 
+#include <linux/interrupt.h>
 #include "../comedidev.h"
 #include <linux/delay.h>
 #include <linux/pci.h>
@@ -61,19 +62,19 @@ struct das16cs_board {
 };
 static const struct das16cs_board das16cs_boards[] = {
 	{
-	      device_id:0x0000,/* unknown */
-	      name:	"PC-CARD DAS16/16",
-	      n_ao_chans:0,
+	.device_id = 0x0000,/* unknown */
+	.name = "PC-CARD DAS16/16",
+	.n_ao_chans = 0,
 		},
 	{
-	      device_id:0x0039,
-	      name:	"PC-CARD DAS16/16-AO",
-	      n_ao_chans:2,
+	.device_id = 0x0039,
+	.name = "PC-CARD DAS16/16-AO",
+	.n_ao_chans = 2,
 		},
 	{
-	      device_id:0x4009,
-	      name:	"PCM-DAS16s/16",
-	      n_ao_chans:0,
+	.device_id = 0x4009,
+	.name = "PCM-DAS16s/16",
+	.n_ao_chans = 0,
 		},
 };
 
@@ -89,13 +90,13 @@ struct das16cs_private {
 };
 #define devpriv ((struct das16cs_private *)dev->private)
 
-static int das16cs_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int das16cs_detach(struct comedi_device * dev);
+static int das16cs_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int das16cs_detach(struct comedi_device *dev);
 static struct comedi_driver driver_das16cs = {
-      driver_name:"cb_das16_cs",
-      module:THIS_MODULE,
-      attach:das16cs_attach,
-      detach:das16cs_detach,
+	.driver_name = "cb_das16_cs",
+	.module = THIS_MODULE,
+	.attach = das16cs_attach,
+	.detach = das16cs_detach,
 };
 
 static struct pcmcia_device *cur_dev = NULL;
@@ -108,26 +109,26 @@ static const struct comedi_lrange das16cs_ai_range = { 4, {
 	}
 };
 
-static irqreturn_t das16cs_interrupt(int irq, void *d PT_REGS_ARG);
-static int das16cs_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int das16cs_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s);
-static int das16cs_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd);
-static int das16cs_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int das16cs_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int das16cs_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int das16cs_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int das16cs_timer_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int das16cs_timer_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-
-static int get_prodid(struct comedi_device * dev, struct pcmcia_device *link)
+static irqreturn_t das16cs_interrupt(int irq, void *d);
+static int das16cs_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int das16cs_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
+static int das16cs_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd);
+static int das16cs_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int das16cs_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int das16cs_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int das16cs_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int das16cs_timer_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int das16cs_timer_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+
+static int get_prodid(struct comedi_device *dev, struct pcmcia_device *link)
 {
 	tuple_t tuple;
 	u_short buf[128];
@@ -165,7 +166,7 @@ static const struct das16cs_board *das16cs_probe(struct comedi_device * dev,
 	return NULL;
 }
 
-static int das16cs_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int das16cs_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct pcmcia_device *link;
 	struct comedi_subdevice *s;
@@ -187,8 +188,8 @@ static int das16cs_attach(struct comedi_device * dev, struct comedi_devconfig *
 	}
 	printk("\n");
 
-	ret = comedi_request_irq(link->irq.AssignedIRQ, das16cs_interrupt,
-		IRQF_SHARED, "cb_das16_cs", dev);
+	ret = request_irq(link->irq.AssignedIRQ, das16cs_interrupt,
+			  IRQF_SHARED, "cb_das16_cs", dev);
 	if (ret < 0) {
 		return ret;
 	}
@@ -265,20 +266,20 @@ static int das16cs_attach(struct comedi_device * dev, struct comedi_devconfig *
 	return 1;
 }
 
-static int das16cs_detach(struct comedi_device * dev)
+static int das16cs_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: das16cs: remove\n", dev->minor);
 
 	if (dev->irq) {
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 	}
 
 	return 0;
 }
 
-static irqreturn_t das16cs_interrupt(int irq, void *d PT_REGS_ARG)
+static irqreturn_t das16cs_interrupt(int irq, void *d)
 {
-	//struct comedi_device *dev = d;
+	/* struct comedi_device *dev = d; */
 	return IRQ_HANDLED;
 }
 
@@ -286,8 +287,8 @@ static irqreturn_t das16cs_interrupt(int irq, void *d PT_REGS_ARG)
  * "instructions" read/write data in "one-shot" or "software-triggered"
  * mode.
  */
-static int das16cs_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das16cs_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int to;
@@ -328,13 +329,13 @@ static int das16cs_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice
 	return i;
 }
 
-static int das16cs_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int das16cs_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	return -EINVAL;
 }
 
-static int das16cs_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int das16cs_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	int tmp;
@@ -489,8 +490,8 @@ static int das16cs_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevic
 	return 0;
 }
 
-static int das16cs_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das16cs_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
@@ -503,7 +504,7 @@ static int das16cs_ao_winsn(struct comedi_device * dev, struct comedi_subdevice
 		d = data[i];
 
 		outw(devpriv->status1, dev->iobase + 4);
-		comedi_udelay(1);
+		udelay(1);
 
 		status1 = devpriv->status1 & ~0xf;
 		if (chan)
@@ -513,17 +514,17 @@ static int das16cs_ao_winsn(struct comedi_device * dev, struct comedi_subdevice
 
 /* 		printk("0x%04x\n",status1);*/
 		outw(status1, dev->iobase + 4);
-		comedi_udelay(1);
+		udelay(1);
 
 		for (bit = 15; bit >= 0; bit--) {
 			int b = (d >> bit) & 0x1;
 			b <<= 1;
 /*			printk("0x%04x\n",status1 | b | 0x0000);*/
 			outw(status1 | b | 0x0000, dev->iobase + 4);
-			comedi_udelay(1);
+			udelay(1);
 /*			printk("0x%04x\n",status1 | b | 0x0004);*/
 			outw(status1 | b | 0x0004, dev->iobase + 4);
-			comedi_udelay(1);
+			udelay(1);
 		}
 /*		make high both DAC0CS and DAC1CS to load
 		new data and update analog output*/
@@ -535,8 +536,8 @@ static int das16cs_ao_winsn(struct comedi_device * dev, struct comedi_subdevice
 
 /* AO subdevices should have a read insn as well as a write insn.
  * Usually this means copying a value stored in devpriv. */
-static int das16cs_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das16cs_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
@@ -552,8 +553,8 @@ static int das16cs_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice
  * useful to applications if you implement the insn_bits interface.
  * This allows packed reading/writing of the DIO channels.  The
  * comedi core can convert between insn_bits and insn_read/write */
-static int das16cs_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das16cs_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -572,8 +573,8 @@ static int das16cs_dio_insn_bits(struct comedi_device * dev, struct comedi_subde
 	return 2;
 }
 
-static int das16cs_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das16cs_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int chan = CR_CHAN(insn->chanspec);
 	int bits;
@@ -610,14 +611,14 @@ static int das16cs_dio_insn_config(struct comedi_device * dev, struct comedi_sub
 	return insn->n;
 }
 
-static int das16cs_timer_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das16cs_timer_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	return -EINVAL;
 }
 
-static int das16cs_timer_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das16cs_timer_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	return -EINVAL;
 }
@@ -766,15 +767,22 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link)
 	tuple.TupleData = buf;
 	tuple.TupleDataMax = sizeof(buf);
 	tuple.TupleOffset = 0;
+
 	last_fn = GetFirstTuple;
-	if ((last_ret = pcmcia_get_first_tuple(link, &tuple)) != 0)
+	last_ret = pcmcia_get_first_tuple(link, &tuple);
+	if (last_ret != 0)
 		goto cs_failed;
+
 	last_fn = GetTupleData;
-	if ((last_ret = pcmcia_get_tuple_data(link, &tuple)) != 0)
+	last_ret = pcmcia_get_tuple_data(link, &tuple);
+	if (last_ret != 0)
 		goto cs_failed;
+
 	last_fn = ParseTuple;
-	if ((last_ret = pcmcia_parse_tuple(link, &tuple, &parse)) != 0)
+	last_ret = pcmcia_parse_tuple(&tuple, &parse);
+	if (last_ret != 0)
 		goto cs_failed;
+
 	link->conf.ConfigBase = parse.config.base;
 	link->conf.Present = parse.config.rmask[0];
 
@@ -792,13 +800,16 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link)
 	 */
 	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
 	last_fn = GetFirstTuple;
-	if ((last_ret = pcmcia_get_first_tuple(link, &tuple)) != 0)
+
+	last_ret = pcmcia_get_first_tuple(link, &tuple);
+	if (last_ret)
 		goto cs_failed;
+
 	while (1) {
 		cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
 		if (pcmcia_get_tuple_data(link, &tuple))
 			goto next_entry;
-		if (pcmcia_parse_tuple(link, &tuple, &parse))
+		if (pcmcia_parse_tuple(&tuple, &parse))
 			goto next_entry;
 
 		if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
@@ -844,7 +855,9 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link)
 
 	      next_entry:
 		last_fn = GetNextTuple;
-		if ((last_ret = pcmcia_get_next_tuple(link, &tuple)) != 0)
+
+		last_ret = pcmcia_get_next_tuple(link, &tuple);
+		if (last_ret)
 			goto cs_failed;
 	}
 
@@ -855,7 +868,9 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link)
 	 */
 	if (link->conf.Attributes & CONF_ENABLE_IRQ) {
 		last_fn = RequestIRQ;
-		if ((last_ret = pcmcia_request_irq(link, &link->irq)) != 0)
+
+		last_ret = pcmcia_request_irq(link, &link->irq);
+		if (last_ret)
 			goto cs_failed;
 	}
 	/*
@@ -864,7 +879,8 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link)
 	   card and host interface into "Memory and IO" mode.
 	 */
 	last_fn = RequestConfiguration;
-	if ((last_ret = pcmcia_request_configuration(link, &link->conf)) != 0)
+	last_ret = pcmcia_request_configuration(link, &link->conf);
+	if (last_ret)
 		goto cs_failed;
 
 	/*
@@ -973,4 +989,4 @@ void __exit cleanup_module(void)
 
 #else
 COMEDI_INITCLEANUP(driver_das16cs);
-#endif //CONFIG_PCMCIA
+#endif /* CONFIG_PCMCIA */
diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c
index fcc55165136..702de157122 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas.c
@@ -63,6 +63,7 @@ analog triggering on 1602 series
 
 #include "../comedidev.h"
 #include <linux/delay.h>
+#include <linux/interrupt.h>
 
 #include "8253.h"
 #include "8255.h"
@@ -70,14 +71,14 @@ analog triggering on 1602 series
 #include "comedi_pci.h"
 #include "comedi_fc.h"
 
-#undef CB_PCIDAS_DEBUG		// disable debugging code
-//#define CB_PCIDAS_DEBUG       // enable debugging code
+#undef CB_PCIDAS_DEBUG		/*  disable debugging code */
+/* #define CB_PCIDAS_DEBUG         enable debugging code */
 
-// PCI vendor number of ComputerBoards/MeasurementComputing
+/* PCI vendor number of ComputerBoards/MeasurementComputing */
 #define PCI_VENDOR_ID_CB	0x1307
-#define TIMER_BASE 100		// 10MHz master clock
-#define AI_BUFFER_SIZE 1024	// maximum fifo size of any supported board
-#define AO_BUFFER_SIZE 1024	// maximum fifo size of any supported board
+#define TIMER_BASE 100		/*  10MHz master clock */
+#define AI_BUFFER_SIZE 1024	/*  maximum fifo size of any supported board */
+#define AO_BUFFER_SIZE 1024	/*  maximum fifo size of any supported board */
 #define NUM_CHANNELS_8800 8
 #define NUM_CHANNELS_7376 1
 #define NUM_CHANNELS_8402 2
@@ -85,71 +86,71 @@ analog triggering on 1602 series
 
 /* PCI-DAS base addresses */
 
-// indices of base address regions
+/* indices of base address regions */
 #define S5933_BADRINDEX 0
 #define CONT_STAT_BADRINDEX 1
 #define ADC_FIFO_BADRINDEX 2
 #define PACER_BADRINDEX 3
 #define AO_BADRINDEX 4
-// sizes of io regions
+/* sizes of io regions */
 #define CONT_STAT_SIZE 10
 #define ADC_FIFO_SIZE 4
 #define PACER_SIZE 12
 #define AO_SIZE 4
 
 /* Control/Status registers */
-#define INT_ADCFIFO	0	// INTERRUPT / ADC FIFO register
-#define   INT_EOS 0x1		// interrupt end of scan
-#define   INT_FHF 0x2		// interrupt fifo half full
-#define   INT_FNE 0x3		// interrupt fifo not empty
-#define   INT_MASK 0x3		// mask of interrupt select bits
-#define   INTE 0x4		// interrupt enable
-#define   DAHFIE 0x8		// dac half full interrupt enable
-#define   EOAIE	0x10		// end of aquisition interrupt enable
-#define   DAHFI	0x20		// dac half full read status / write interrupt clear
-#define   EOAI 0x40		// read end of acq. interrupt status / write clear
-#define   INT 0x80		// read interrupt status / write clear
-#define   EOBI 0x200		// read end of burst interrupt status
-#define   ADHFI 0x400		// read half-full interrupt status
-#define   ADNEI 0x800		// read fifo not empty interrupt latch status
-#define   ADNE 0x1000		// read, fifo not empty (realtime, not latched) status
-#define   DAEMIE	0x1000	// write, dac empty interrupt enable
-#define   LADFUL 0x2000		// read fifo overflow / write clear
-#define   DAEMI 0x4000		// dac fifo empty interrupt status / write clear
-
-#define ADCMUX_CONT	2	// ADC CHANNEL MUX AND CONTROL register
+#define INT_ADCFIFO	0	/*  INTERRUPT / ADC FIFO register */
+#define   INT_EOS 0x1		/*  interrupt end of scan */
+#define   INT_FHF 0x2		/*  interrupt fifo half full */
+#define   INT_FNE 0x3		/*  interrupt fifo not empty */
+#define   INT_MASK 0x3		/*  mask of interrupt select bits */
+#define   INTE 0x4		/*  interrupt enable */
+#define   DAHFIE 0x8		/*  dac half full interrupt enable */
+#define   EOAIE	0x10		/*  end of aquisition interrupt enable */
+#define   DAHFI	0x20		/*  dac half full read status / write interrupt clear */
+#define   EOAI 0x40		/*  read end of acq. interrupt status / write clear */
+#define   INT 0x80		/*  read interrupt status / write clear */
+#define   EOBI 0x200		/*  read end of burst interrupt status */
+#define   ADHFI 0x400		/*  read half-full interrupt status */
+#define   ADNEI 0x800		/*  read fifo not empty interrupt latch status */
+#define   ADNE 0x1000		/*  read, fifo not empty (realtime, not latched) status */
+#define   DAEMIE	0x1000	/*  write, dac empty interrupt enable */
+#define   LADFUL 0x2000		/*  read fifo overflow / write clear */
+#define   DAEMI 0x4000		/*  dac fifo empty interrupt status / write clear */
+
+#define ADCMUX_CONT	2	/*  ADC CHANNEL MUX AND CONTROL register */
 #define   BEGIN_SCAN(x)	((x) & 0xf)
 #define   END_SCAN(x)	(((x) & 0xf) << 4)
 #define   GAIN_BITS(x)	(((x) & 0x3) << 8)
-#define   UNIP	0x800		// Analog front-end unipolar for range
-#define   SE	0x400		// Inputs in single-ended mode
-#define   PACER_MASK	0x3000	// pacer source bits
-#define   PACER_INT 0x1000	// internal pacer
-#define   PACER_EXT_FALL	0x2000	// external falling edge
-#define   PACER_EXT_RISE	0x3000	// external rising edge
-#define   EOC	0x4000		// adc not busy
-
-#define TRIG_CONTSTAT 4		// TRIGGER CONTROL/STATUS register
-#define   SW_TRIGGER 0x1	// software start trigger
-#define   EXT_TRIGGER 0x2	// external start trigger
-#define   ANALOG_TRIGGER 0x3	// external analog trigger
-#define   TRIGGER_MASK	0x3	// mask of bits that determine start trigger
-#define   TGEN	0x10		// enable external start trigger
-#define   BURSTE 0x20		// burst mode enable
-#define   XTRCL	0x80		// clear external trigger
-
-#define CALIBRATION_REG	6	// CALIBRATION register
-#define   SELECT_8800_BIT	0x100	// select 8800 caldac
-#define   SELECT_TRIMPOT_BIT	0x200	// select ad7376 trim pot
-#define   SELECT_DAC08_BIT	0x400	// select dac08 caldac
+#define   UNIP	0x800		/*  Analog front-end unipolar for range */
+#define   SE	0x400		/*  Inputs in single-ended mode */
+#define   PACER_MASK	0x3000	/*  pacer source bits */
+#define   PACER_INT 0x1000	/*  internal pacer */
+#define   PACER_EXT_FALL	0x2000	/*  external falling edge */
+#define   PACER_EXT_RISE	0x3000	/*  external rising edge */
+#define   EOC	0x4000		/*  adc not busy */
+
+#define TRIG_CONTSTAT 4		/*  TRIGGER CONTROL/STATUS register */
+#define   SW_TRIGGER 0x1	/*  software start trigger */
+#define   EXT_TRIGGER 0x2	/*  external start trigger */
+#define   ANALOG_TRIGGER 0x3	/*  external analog trigger */
+#define   TRIGGER_MASK	0x3	/*  mask of bits that determine start trigger */
+#define   TGEN	0x10		/*  enable external start trigger */
+#define   BURSTE 0x20		/*  burst mode enable */
+#define   XTRCL	0x80		/*  clear external trigger */
+
+#define CALIBRATION_REG	6	/*  CALIBRATION register */
+#define   SELECT_8800_BIT	0x100	/*  select 8800 caldac */
+#define   SELECT_TRIMPOT_BIT	0x200	/*  select ad7376 trim pot */
+#define   SELECT_DAC08_BIT	0x400	/*  select dac08 caldac */
 #define   CAL_SRC_BITS(x)	(((x) & 0x7) << 11)
-#define   CAL_EN_BIT	0x4000	// read calibration source instead of analog input channel 0
-#define   SERIAL_DATA_IN_BIT	0x8000	// serial data stream going to 8800 and 7376
+#define   CAL_EN_BIT	0x4000	/*  read calibration source instead of analog input channel 0 */
+#define   SERIAL_DATA_IN_BIT	0x8000	/*  serial data stream going to 8800 and 7376 */
 
-#define DAC_CSR	0x8		// dac control and status register
+#define DAC_CSR	0x8		/*  dac control and status register */
 enum dac_csr_bits {
-	DACEN = 0x2,		// dac enable
-	DAC_MODE_UPDATE_BOTH = 0x80,	// update both dacs when dac0 is written
+	DACEN = 0x2,		/*  dac enable */
+	DAC_MODE_UPDATE_BOTH = 0x80,	/*  update both dacs when dac0 is written */
 };
 static inline unsigned int DAC_RANGE(unsigned int channel, unsigned int range)
 {
@@ -160,42 +161,42 @@ static inline unsigned int DAC_RANGE_MASK(unsigned int channel)
 	return 0x3 << (8 + 2 * (channel & 0x1));
 };
 
-// bits for 1602 series only
+/* bits for 1602 series only */
 enum dac_csr_bits_1602 {
-	DAC_EMPTY = 0x1,	// dac fifo empty, read, write clear
-	DAC_START = 0x4,	// start/arm dac fifo operations
-	DAC_PACER_MASK = 0x18,	// bits that set dac pacer source
-	DAC_PACER_INT = 0x8,	// dac internal pacing
-	DAC_PACER_EXT_FALL = 0x10,	// dac external pacing, falling edge
-	DAC_PACER_EXT_RISE = 0x18,	// dac external pacing, rising edge
+	DAC_EMPTY = 0x1,	/*  dac fifo empty, read, write clear */
+	DAC_START = 0x4,	/*  start/arm dac fifo operations */
+	DAC_PACER_MASK = 0x18,	/*  bits that set dac pacer source */
+	DAC_PACER_INT = 0x8,	/*  dac internal pacing */
+	DAC_PACER_EXT_FALL = 0x10,	/*  dac external pacing, falling edge */
+	DAC_PACER_EXT_RISE = 0x18,	/*  dac external pacing, rising edge */
 };
 static inline unsigned int DAC_CHAN_EN(unsigned int channel)
 {
-	return 1 << (5 + (channel & 0x1));	// enable channel 0 or 1
+	return 1 << (5 + (channel & 0x1));	/*  enable channel 0 or 1 */
 };
 
 /* analog input fifo */
-#define ADCDATA	0		// ADC DATA register
-#define ADCFIFOCLR	2	// ADC FIFO CLEAR
+#define ADCDATA	0		/*  ADC DATA register */
+#define ADCFIFOCLR	2	/*  ADC FIFO CLEAR */
 
-// pacer, counter, dio registers
+/* pacer, counter, dio registers */
 #define ADC8254 0
 #define DIO_8255 4
 #define DAC8254 8
 
-// analog output registers for 100x, 1200 series
+/* analog output registers for 100x, 1200 series */
 static inline unsigned int DAC_DATA_REG(unsigned int channel)
 {
 	return 2 * (channel & 0x1);
 }
 
 /* analog output registers for 1602 series*/
-#define DACDATA	0		// DAC DATA register
-#define DACFIFOCLR	2	// DAC FIFO CLEAR
+#define DACDATA	0		/*  DAC DATA register */
+#define DACFIFOCLR	2	/*  DAC FIFO CLEAR */
 
-// bit in hexadecimal representation of range index that indicates unipolar input range
+/* bit in hexadecimal representation of range index that indicates unipolar input range */
 #define IS_UNIPOLAR 0x4
-// analog input ranges for most boards
+/* analog input ranges for most boards */
 static const struct comedi_lrange cb_pcidas_ranges = {
 	8,
 	{
@@ -210,7 +211,7 @@ static const struct comedi_lrange cb_pcidas_ranges = {
 		}
 };
 
-// pci-das1001 input ranges
+/* pci-das1001 input ranges */
 static const struct comedi_lrange cb_pcidas_alt_ranges = {
 	8,
 	{
@@ -225,7 +226,7 @@ static const struct comedi_lrange cb_pcidas_alt_ranges = {
 		}
 };
 
-// analog output ranges
+/* analog output ranges */
 static const struct comedi_lrange cb_pcidas_ao_ranges = {
 	4,
 	{
@@ -244,14 +245,14 @@ enum trimpot_model {
 struct cb_pcidas_board {
 	const char *name;
 	unsigned short device_id;
-	int ai_se_chans;	// Inputs in single-ended mode
-	int ai_diff_chans;	// Inputs in differential mode
-	int ai_bits;		// analog input resolution
-	int ai_speed;		// fastest conversion period in ns
-	int ao_nchan;		// number of analog out channels
-	int has_ao_fifo;	// analog output has fifo
-	int ao_scan_speed;	// analog output speed for 1602 series (for a scan, not conversion)
-	int fifo_size;		// number of samples fifo can hold
+	int ai_se_chans;	/*  Inputs in single-ended mode */
+	int ai_diff_chans;	/*  Inputs in differential mode */
+	int ai_bits;		/*  analog input resolution */
+	int ai_speed;		/*  fastest conversion period in ns */
+	int ao_nchan;		/*  number of analog out channels */
+	int has_ao_fifo;	/*  analog output has fifo */
+	int ao_scan_speed;	/*  analog output speed for 1602 series (for a scan, not conversion) */
+	int fifo_size;		/*  number of samples fifo can hold */
 	const struct comedi_lrange *ranges;
 	enum trimpot_model trimpot;
 	unsigned has_dac08:1;
@@ -259,124 +260,121 @@ struct cb_pcidas_board {
 
 static const struct cb_pcidas_board cb_pcidas_boards[] = {
 	{
-	      name:	"pci-das1602/16",
-	      device_id:0x1,
-	      ai_se_chans:16,
-	      ai_diff_chans:8,
-	      ai_bits:	16,
-	      ai_speed:5000,
-	      ao_nchan:2,
-	      has_ao_fifo:1,
-	      ao_scan_speed:10000,
-	      fifo_size:512,
-	      ranges:	&cb_pcidas_ranges,
-	      trimpot:	AD8402,
-	      has_dac08:1,
+	.name = "pci-das1602/16",
+	.device_id = 0x1,
+	.ai_se_chans = 16,
+	.ai_diff_chans = 8,
+	.ai_bits = 16,
+	.ai_speed = 5000,
+	.ao_nchan = 2,
+	.has_ao_fifo = 1,
+	.ao_scan_speed = 10000,
+	.fifo_size = 512,
+	.ranges = &cb_pcidas_ranges,
+	.trimpot = AD8402,
+	.has_dac08 = 1,
 		},
 	{
-	      name:	"pci-das1200",
-	      device_id:0xF,
-	      ai_se_chans:16,
-	      ai_diff_chans:8,
-	      ai_bits:	12,
-	      ai_speed:3200,
-	      ao_nchan:2,
-	      has_ao_fifo:0,
-	      fifo_size:1024,
-	      ranges:	&cb_pcidas_ranges,
-	      trimpot:	AD7376,
-	      has_dac08:0,
+	.name = "pci-das1200",
+	.device_id = 0xF,
+	.ai_se_chans = 16,
+	.ai_diff_chans = 8,
+	.ai_bits = 12,
+	.ai_speed = 3200,
+	.ao_nchan = 2,
+	.has_ao_fifo = 0,
+	.fifo_size = 1024,
+	.ranges = &cb_pcidas_ranges,
+	.trimpot = AD7376,
+	.has_dac08 = 0,
 		},
 	{
-	      name:	"pci-das1602/12",
-	      device_id:0x10,
-	      ai_se_chans:16,
-	      ai_diff_chans:8,
-	      ai_bits:	12,
-	      ai_speed:3200,
-	      ao_nchan:2,
-	      has_ao_fifo:1,
-	      ao_scan_speed:4000,
-	      fifo_size:1024,
-	      ranges:	&cb_pcidas_ranges,
-	      trimpot:	AD7376,
-	      has_dac08:0,
+	.name = "pci-das1602/12",
+	.device_id = 0x10,
+	.ai_se_chans = 16,
+	.ai_diff_chans = 8,
+	.ai_bits = 12,
+	.ai_speed = 3200,
+	.ao_nchan = 2,
+	.has_ao_fifo = 1,
+	.ao_scan_speed = 4000,
+	.fifo_size = 1024,
+	.ranges = &cb_pcidas_ranges,
+	.trimpot = AD7376,
+	.has_dac08 = 0,
 		},
 	{
-	      name:	"pci-das1200/jr",
-	      device_id:0x19,
-	      ai_se_chans:16,
-	      ai_diff_chans:8,
-	      ai_bits:	12,
-	      ai_speed:3200,
-	      ao_nchan:0,
-	      has_ao_fifo:0,
-	      fifo_size:1024,
-	      ranges:	&cb_pcidas_ranges,
-	      trimpot:	AD7376,
-	      has_dac08:0,
+	.name = "pci-das1200/jr",
+	.device_id = 0x19,
+	.ai_se_chans = 16,
+	.ai_diff_chans = 8,
+	.ai_bits = 12,
+	.ai_speed = 3200,
+	.ao_nchan = 0,
+	.has_ao_fifo = 0,
+	.fifo_size = 1024,
+	.ranges = &cb_pcidas_ranges,
+	.trimpot = AD7376,
+	.has_dac08 = 0,
 		},
 	{
-	      name:	"pci-das1602/16/jr",
-	      device_id:0x1C,
-	      ai_se_chans:16,
-	      ai_diff_chans:8,
-	      ai_bits:	16,
-	      ai_speed:5000,
-	      ao_nchan:0,
-	      has_ao_fifo:0,
-	      fifo_size:512,
-	      ranges:	&cb_pcidas_ranges,
-	      trimpot:	AD8402,
-	      has_dac08:1,
+	.name = "pci-das1602/16/jr",
+	.device_id = 0x1C,
+	.ai_se_chans = 16,
+	.ai_diff_chans = 8,
+	.ai_bits = 16,
+	.ai_speed = 5000,
+	.ao_nchan = 0,
+	.has_ao_fifo = 0,
+	.fifo_size = 512,
+	.ranges = &cb_pcidas_ranges,
+	.trimpot = AD8402,
+	.has_dac08 = 1,
 		},
 	{
-	      name:	"pci-das1000",
-	      device_id:0x4C,
-	      ai_se_chans:16,
-	      ai_diff_chans:8,
-	      ai_bits:	12,
-	      ai_speed:4000,
-	      ao_nchan:0,
-	      has_ao_fifo:0,
-	      fifo_size:1024,
-	      ranges:	&cb_pcidas_ranges,
-	      trimpot:	AD7376,
-	      has_dac08:0,
+	.name = "pci-das1000",
+	.device_id = 0x4C,
+	.ai_se_chans = 16,
+	.ai_diff_chans = 8,
+	.ai_bits = 12,
+	.ai_speed = 4000,
+	.ao_nchan = 0,
+	.has_ao_fifo = 0,
+	.fifo_size = 1024,
+	.ranges = &cb_pcidas_ranges,
+	.trimpot = AD7376,
+	.has_dac08 = 0,
 		},
 	{
-	      name:	"pci-das1001",
-	      device_id:0x1a,
-	      ai_se_chans:16,
-	      ai_diff_chans:8,
-	      ai_bits:	12,
-	      ai_speed:6800,
-	      ao_nchan:2,
-	      has_ao_fifo:0,
-	      fifo_size:1024,
-	      ranges:	&cb_pcidas_alt_ranges,
-	      trimpot:	AD7376,
-	      has_dac08:0,
+	.name = "pci-das1001",
+	.device_id = 0x1a,
+	.ai_se_chans = 16,
+	.ai_diff_chans = 8,
+	.ai_bits = 12,
+	.ai_speed = 6800,
+	.ao_nchan = 2,
+	.has_ao_fifo = 0,
+	.fifo_size = 1024,
+	.ranges = &cb_pcidas_alt_ranges,
+	.trimpot = AD7376,
+	.has_dac08 = 0,
 		},
 	{
-	      name:	"pci-das1002",
-	      device_id:0x1b,
-	      ai_se_chans:16,
-	      ai_diff_chans:8,
-	      ai_bits:	12,
-	      ai_speed:6800,
-	      ao_nchan:2,
-	      has_ao_fifo:0,
-	      fifo_size:1024,
-	      ranges:	&cb_pcidas_ranges,
-	      trimpot:	AD7376,
-	      has_dac08:0,
+	.name = "pci-das1002",
+	.device_id = 0x1b,
+	.ai_se_chans = 16,
+	.ai_diff_chans = 8,
+	.ai_bits = 12,
+	.ai_speed = 6800,
+	.ao_nchan = 2,
+	.has_ao_fifo = 0,
+	.fifo_size = 1024,
+	.ranges = &cb_pcidas_ranges,
+	.trimpot = AD7376,
+	.has_dac08 = 0,
 		},
 };
 
-// Number of boards in cb_pcidas_boards
-#define N_BOARDS	(sizeof(cb_pcidas_boards) / sizeof(struct cb_pcidas_board))
-
 static DEFINE_PCI_DEVICE_TABLE(cb_pcidas_pci_table) = {
 	{PCI_VENDOR_ID_CB, 0x0001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{PCI_VENDOR_ID_CB, 0x000f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
@@ -402,28 +400,28 @@ MODULE_DEVICE_TABLE(pci, cb_pcidas_pci_table);
 struct cb_pcidas_private {
 	/* would be useful for a PCI device */
 	struct pci_dev *pci_dev;
-	// base addresses
+	/*  base addresses */
 	unsigned long s5933_config;
 	unsigned long control_status;
 	unsigned long adc_fifo;
 	unsigned long pacer_counter_dio;
 	unsigned long ao_registers;
-	// divisors of master clock for analog input pacing
+	/*  divisors of master clock for analog input pacing */
 	unsigned int divisor1;
 	unsigned int divisor2;
-	volatile unsigned int count;	// number of analog input samples remaining
-	volatile unsigned int adc_fifo_bits;	// bits to write to interupt/adcfifo register
-	volatile unsigned int s5933_intcsr_bits;	// bits to write to amcc s5933 interrupt control/status register
-	volatile unsigned int ao_control_bits;	// bits to write to ao control and status register
+	volatile unsigned int count;	/*  number of analog input samples remaining */
+	volatile unsigned int adc_fifo_bits;	/*  bits to write to interupt/adcfifo register */
+	volatile unsigned int s5933_intcsr_bits;	/*  bits to write to amcc s5933 interrupt control/status register */
+	volatile unsigned int ao_control_bits;	/*  bits to write to ao control and status register */
 	short ai_buffer[AI_BUFFER_SIZE];
 	short ao_buffer[AO_BUFFER_SIZE];
-	// divisors of master clock for analog output pacing
+	/*  divisors of master clock for analog output pacing */
 	unsigned int ao_divisor1;
 	unsigned int ao_divisor2;
-	volatile unsigned int ao_count;	// number of analog output samples remaining
-	int ao_value[2];	// remember what the analog outputs are set to, to allow readback
-	unsigned int caldac_value[NUM_CHANNELS_8800];	// for readback of caldac
-	unsigned int trimpot_value[NUM_CHANNELS_8402];	// for readback of trimpot
+	volatile unsigned int ao_count;	/*  number of analog output samples remaining */
+	int ao_value[2];	/*  remember what the analog outputs are set to, to allow readback */
+	unsigned int caldac_value[NUM_CHANNELS_8800];	/*  for readback of caldac */
+	unsigned int trimpot_value[NUM_CHANNELS_8402];	/*  for readback of trimpot */
 	unsigned int dac08_value;
 	unsigned int calibration_source;
 };
@@ -440,66 +438,66 @@ struct cb_pcidas_private {
  * the board, and also about the kernel module that contains
  * the device code.
  */
-static int cb_pcidas_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int cb_pcidas_detach(struct comedi_device * dev);
+static int cb_pcidas_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int cb_pcidas_detach(struct comedi_device *dev);
 static struct comedi_driver driver_cb_pcidas = {
-      driver_name:"cb_pcidas",
-      module:THIS_MODULE,
-      attach:cb_pcidas_attach,
-      detach:cb_pcidas_detach,
+	.driver_name = "cb_pcidas",
+	.module = THIS_MODULE,
+	.attach = cb_pcidas_attach,
+	.detach = cb_pcidas_detach,
 };
 
 static int cb_pcidas_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int ai_config_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int cb_pcidas_ao_nofifo_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int cb_pcidas_ao_fifo_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int cb_pcidas_ao_readback_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int cb_pcidas_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s);
-static int cb_pcidas_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd);
-static int cb_pcidas_ao_cmd(struct comedi_device * dev, struct comedi_subdevice * s);
+	struct comedi_insn *insn, unsigned int *data);
+static int ai_config_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int cb_pcidas_ao_nofifo_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int cb_pcidas_ao_fifo_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int cb_pcidas_ao_readback_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int cb_pcidas_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
+static int cb_pcidas_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd);
+static int cb_pcidas_ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
 static int cb_pcidas_ao_inttrig(struct comedi_device *dev,
 				struct comedi_subdevice *subdev,
 				unsigned int trig_num);
-static int cb_pcidas_ao_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd);
-static irqreturn_t cb_pcidas_interrupt(int irq, void *d PT_REGS_ARG);
-static void handle_ao_interrupt(struct comedi_device * dev, unsigned int status);
-static int cb_pcidas_cancel(struct comedi_device * dev, struct comedi_subdevice * s);
-static int cb_pcidas_ao_cancel(struct comedi_device * dev, struct comedi_subdevice * s);
-static void cb_pcidas_load_counters(struct comedi_device * dev, unsigned int *ns,
+static int cb_pcidas_ao_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd);
+static irqreturn_t cb_pcidas_interrupt(int irq, void *d);
+static void handle_ao_interrupt(struct comedi_device *dev, unsigned int status);
+static int cb_pcidas_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
+static int cb_pcidas_ao_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
+static void cb_pcidas_load_counters(struct comedi_device *dev, unsigned int *ns,
 	int round_flags);
-static int eeprom_read_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int caldac_read_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int caldac_write_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int trimpot_read_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int cb_pcidas_trimpot_write(struct comedi_device * dev, unsigned int channel,
+static int eeprom_read_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int caldac_read_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int caldac_write_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int trimpot_read_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int cb_pcidas_trimpot_write(struct comedi_device *dev, unsigned int channel,
 	unsigned int value);
-static int trimpot_write_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int dac08_read_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int dac08_write(struct comedi_device * dev, unsigned int value);
-static int dac08_write_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int caldac_8800_write(struct comedi_device * dev, unsigned int address,
+static int trimpot_write_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int dac08_read_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int dac08_write(struct comedi_device *dev, unsigned int value);
+static int dac08_write_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int caldac_8800_write(struct comedi_device *dev, unsigned int address,
 	uint8_t value);
-static int trimpot_7376_write(struct comedi_device * dev, uint8_t value);
-static int trimpot_8402_write(struct comedi_device * dev, unsigned int channel,
+static int trimpot_7376_write(struct comedi_device *dev, uint8_t value);
+static int trimpot_8402_write(struct comedi_device *dev, unsigned int channel,
 	uint8_t value);
-static int nvram_read(struct comedi_device * dev, unsigned int address,
-	uint8_t * data);
+static int nvram_read(struct comedi_device *dev, unsigned int address,
+	uint8_t *data);
 
-static inline unsigned int cal_enable_bits(struct comedi_device * dev)
+static inline unsigned int cal_enable_bits(struct comedi_device *dev)
 {
 	return CAL_EN_BIT | CAL_SRC_BITS(devpriv->calibration_source);
 }
@@ -508,7 +506,7 @@ static inline unsigned int cal_enable_bits(struct comedi_device * dev)
  * Attach is called by the Comedi core to configure the driver
  * for a particular board.
  */
-static int cb_pcidas_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int cb_pcidas_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	struct pci_dev *pcidev;
@@ -531,16 +529,16 @@ static int cb_pcidas_attach(struct comedi_device * dev, struct comedi_devconfig
 	for (pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
 		pcidev != NULL;
 		pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pcidev)) {
-		// is it not a computer boards card?
+		/*  is it not a computer boards card? */
 		if (pcidev->vendor != PCI_VENDOR_ID_CB)
 			continue;
-		// loop through cards supported by this driver
-		for (index = 0; index < N_BOARDS; index++) {
+		/*  loop through cards supported by this driver */
+		for (index = 0; index < ARRAY_SIZE(cb_pcidas_boards); index++) {
 			if (cb_pcidas_boards[index].device_id != pcidev->device)
 				continue;
-			// was a particular bus/slot requested?
+			/*  was a particular bus/slot requested? */
 			if (it->options[0] || it->options[1]) {
-				// are we on the wrong bus/slot?
+				/*  are we on the wrong bus/slot? */
 				if (pcidev->bus->number != it->options[0] ||
 					PCI_SLOT(pcidev->devfn) !=
 					it->options[1]) {
@@ -585,19 +583,19 @@ static int cb_pcidas_attach(struct comedi_device * dev, struct comedi_devconfig
 		devpriv->ao_registers =
 			pci_resource_start(devpriv->pci_dev, AO_BADRINDEX);
 	}
-	// disable and clear interrupts on amcc s5933
+	/*  disable and clear interrupts on amcc s5933 */
 	outl(INTCSR_INBOX_INTR_STATUS,
 		devpriv->s5933_config + AMCC_OP_REG_INTCSR);
 
-	// get irq
-	if (comedi_request_irq(devpriv->pci_dev->irq, cb_pcidas_interrupt,
+	/*  get irq */
+	if (request_irq(devpriv->pci_dev->irq, cb_pcidas_interrupt,
 			IRQF_SHARED, "cb_pcidas", dev)) {
 		printk(" unable to allocate irq %d\n", devpriv->pci_dev->irq);
 		return -EINVAL;
 	}
 	dev->irq = devpriv->pci_dev->irq;
 
-	//Initialize dev->board_name
+	/* Initialize dev->board_name */
 	dev->board_name = thisboard->name;
 
 /*
@@ -628,7 +626,7 @@ static int cb_pcidas_attach(struct comedi_device * dev, struct comedi_devconfig
 		s->type = COMEDI_SUBD_AO;
 		s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_GROUND;
 		s->n_chan = thisboard->ao_nchan;
-		// analog out resolution is the same as analog input resolution, so use ai_bits
+		/*  analog out resolution is the same as analog input resolution, so use ai_bits */
 		s->maxdata = (1 << thisboard->ai_bits) - 1;
 		s->range_table = &cb_pcidas_ao_ranges;
 		s->insn_read = cb_pcidas_ao_readback_insn;
@@ -650,7 +648,7 @@ static int cb_pcidas_attach(struct comedi_device * dev, struct comedi_devconfig
 	s = dev->subdevices + 2;
 	subdev_8255_init(dev, s, NULL, devpriv->pacer_counter_dio + DIO_8255);
 
-	// serial EEPROM,
+	/*  serial EEPROM, */
 	s = dev->subdevices + 3;
 	s->type = COMEDI_SUBD_MEMORY;
 	s->subdev_flags = SDF_READABLE | SDF_INTERNAL;
@@ -658,7 +656,7 @@ static int cb_pcidas_attach(struct comedi_device * dev, struct comedi_devconfig
 	s->maxdata = 0xff;
 	s->insn_read = eeprom_read_insn;
 
-	// 8800 caldac
+	/*  8800 caldac */
 	s = dev->subdevices + 4;
 	s->type = COMEDI_SUBD_CALIB;
 	s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL;
@@ -669,7 +667,7 @@ static int cb_pcidas_attach(struct comedi_device * dev, struct comedi_devconfig
 	for (i = 0; i < s->n_chan; i++)
 		caldac_8800_write(dev, i, s->maxdata / 2);
 
-	// trim potentiometer
+	/*  trim potentiometer */
 	s = dev->subdevices + 5;
 	s->type = COMEDI_SUBD_CALIB;
 	s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL;
@@ -685,7 +683,7 @@ static int cb_pcidas_attach(struct comedi_device * dev, struct comedi_devconfig
 	for (i = 0; i < s->n_chan; i++)
 		cb_pcidas_trimpot_write(dev, i, s->maxdata / 2);
 
-	// dac08 caldac
+	/*  dac08 caldac */
 	s = dev->subdevices + 6;
 	if (thisboard->has_dac08) {
 		s->type = COMEDI_SUBD_CALIB;
@@ -698,13 +696,13 @@ static int cb_pcidas_attach(struct comedi_device * dev, struct comedi_devconfig
 	} else
 		s->type = COMEDI_SUBD_UNUSED;
 
-	// make sure mailbox 4 is empty
+	/*  make sure mailbox 4 is empty */
 	inl(devpriv->s5933_config + AMCC_OP_REG_IMB4);
 	/* Set bits to enable incoming mailbox interrupts on amcc s5933. */
 	devpriv->s5933_intcsr_bits =
 		INTCSR_INBOX_BYTE(3) | INTCSR_INBOX_SELECT(3) |
 		INTCSR_INBOX_FULL_INT;
-	// clear and enable interrupt on amcc s5933
+	/*  clear and enable interrupt on amcc s5933 */
 	outl(devpriv->s5933_intcsr_bits | INTCSR_INBOX_INTR_STATUS,
 		devpriv->s5933_config + AMCC_OP_REG_INTCSR);
 
@@ -719,24 +717,24 @@ static int cb_pcidas_attach(struct comedi_device * dev, struct comedi_devconfig
  * allocated by _attach().  dev->private and dev->subdevices are
  * deallocated automatically by the core.
  */
-static int cb_pcidas_detach(struct comedi_device * dev)
+static int cb_pcidas_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: cb_pcidas: remove\n", dev->minor);
 
 	if (devpriv) {
 		if (devpriv->s5933_config) {
-			// disable and clear interrupts on amcc s5933
+			/*  disable and clear interrupts on amcc s5933 */
 			outl(INTCSR_INBOX_INTR_STATUS,
 				devpriv->s5933_config + AMCC_OP_REG_INTCSR);
 #ifdef CB_PCIDAS_DEBUG
-			rt_printk("detaching, incsr is 0x%x\n",
+			printk("detaching, incsr is 0x%x\n",
 				inl(devpriv->s5933_config +
 					AMCC_OP_REG_INTCSR));
 #endif
 		}
 	}
 	if (dev->irq)
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 	if (dev->subdevices)
 		subdev_8255_cleanup(dev, dev->subdevices + 2);
 	if (devpriv && devpriv->pci_dev) {
@@ -753,14 +751,14 @@ static int cb_pcidas_detach(struct comedi_device * dev)
  * "instructions" read/write data in "one-shot" or "software-triggered"
  * mode.
  */
-static int cb_pcidas_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int cb_pcidas_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n, i;
 	unsigned int bits;
 	static const int timeout = 10000;
 	int channel;
-	// enable calibration input if appropriate
+	/*  enable calibration input if appropriate */
 	if (insn->chanspec & CR_ALT_SOURCE) {
 		outw(cal_enable_bits(dev),
 			devpriv->control_status + CALIBRATION_REG);
@@ -769,13 +767,13 @@ static int cb_pcidas_ai_rinsn(struct comedi_device * dev, struct comedi_subdevic
 		outw(0, devpriv->control_status + CALIBRATION_REG);
 		channel = CR_CHAN(insn->chanspec);
 	}
-	// set mux limits and gain
+	/*  set mux limits and gain */
 	bits = BEGIN_SCAN(channel) |
 		END_SCAN(channel) | GAIN_BITS(CR_RANGE(insn->chanspec));
-	// set unipolar/bipolar
+	/*  set unipolar/bipolar */
 	if (CR_RANGE(insn->chanspec) & IS_UNIPOLAR)
 		bits |= UNIP;
-	// set singleended/differential
+	/*  set singleended/differential */
 	if (CR_AREF(insn->chanspec) != AREF_DIFF)
 		bits |= SE;
 	outw(bits, devpriv->control_status + ADCMUX_CONT);
@@ -805,7 +803,7 @@ static int cb_pcidas_ai_rinsn(struct comedi_device * dev, struct comedi_subdevic
 	return n;
 }
 
-static int ai_config_calibration_source(struct comedi_device * dev, unsigned int * data)
+static int ai_config_calibration_source(struct comedi_device *dev, unsigned int *data)
 {
 	static const int num_calibration_sources = 8;
 	unsigned int source = data[1];
@@ -820,8 +818,8 @@ static int ai_config_calibration_source(struct comedi_device * dev, unsigned int
 	return 2;
 }
 
-static int ai_config_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ai_config_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int id = data[0];
 
@@ -836,44 +834,44 @@ static int ai_config_insn(struct comedi_device * dev, struct comedi_subdevice *
 	return -EINVAL;
 }
 
-// analog output insn for pcidas-1000 and 1200 series
-static int cb_pcidas_ao_nofifo_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+/* analog output insn for pcidas-1000 and 1200 series */
+static int cb_pcidas_ao_nofifo_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int channel;
 	unsigned long flags;
 
-	// set channel and range
+	/*  set channel and range */
 	channel = CR_CHAN(insn->chanspec);
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	spin_lock_irqsave(&dev->spinlock, flags);
 	devpriv->ao_control_bits &=
 		~DAC_MODE_UPDATE_BOTH & ~DAC_RANGE_MASK(channel);
 	devpriv->ao_control_bits |=
 		DACEN | DAC_RANGE(channel, CR_RANGE(insn->chanspec));
 	outw(devpriv->ao_control_bits, devpriv->control_status + DAC_CSR);
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
-	// remember value for readback
+	/*  remember value for readback */
 	devpriv->ao_value[channel] = data[0];
-	// send data
+	/*  send data */
 	outw(data[0], devpriv->ao_registers + DAC_DATA_REG(channel));
 
 	return 1;
 }
 
-// analog output insn for pcidas-1602 series
-static int cb_pcidas_ao_fifo_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+/* analog output insn for pcidas-1602 series */
+static int cb_pcidas_ao_fifo_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int channel;
 	unsigned long flags;
 
-	// clear dac fifo
+	/*  clear dac fifo */
 	outw(0, devpriv->ao_registers + DACFIFOCLR);
 
-	// set channel and range
+	/*  set channel and range */
 	channel = CR_CHAN(insn->chanspec);
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	spin_lock_irqsave(&dev->spinlock, flags);
 	devpriv->ao_control_bits &=
 		~DAC_CHAN_EN(0) & ~DAC_CHAN_EN(1) & ~DAC_RANGE_MASK(channel) &
 		~DAC_PACER_MASK;
@@ -881,28 +879,28 @@ static int cb_pcidas_ao_fifo_winsn(struct comedi_device * dev, struct comedi_sub
 		DACEN | DAC_RANGE(channel,
 		CR_RANGE(insn->chanspec)) | DAC_CHAN_EN(channel) | DAC_START;
 	outw(devpriv->ao_control_bits, devpriv->control_status + DAC_CSR);
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
-	// remember value for readback
+	/*  remember value for readback */
 	devpriv->ao_value[channel] = data[0];
-	// send data
+	/*  send data */
 	outw(data[0], devpriv->ao_registers + DACDATA);
 
 	return 1;
 }
 
-// analog output readback insn
-// XXX loses track of analog output value back after an analog ouput command is executed
-static int cb_pcidas_ao_readback_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+/* analog output readback insn */
+/* XXX loses track of analog output value back after an analog ouput command is executed */
+static int cb_pcidas_ao_readback_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	data[0] = devpriv->ao_value[CR_CHAN(insn->chanspec)];
 
 	return 1;
 }
 
-static int eeprom_read_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int eeprom_read_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	uint8_t nvram_data;
 	int retval;
@@ -916,16 +914,16 @@ static int eeprom_read_insn(struct comedi_device * dev, struct comedi_subdevice
 	return 1;
 }
 
-static int caldac_write_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int caldac_write_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	const unsigned int channel = CR_CHAN(insn->chanspec);
 
 	return caldac_8800_write(dev, channel, data[0]);
 }
 
-static int caldac_read_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int caldac_read_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	data[0] = devpriv->caldac_value[CR_CHAN(insn->chanspec)];
 
@@ -933,7 +931,7 @@ static int caldac_read_insn(struct comedi_device * dev, struct comedi_subdevice
 }
 
 /* 1602/16 pregain offset */
-static int dac08_write(struct comedi_device * dev, unsigned int value)
+static int dac08_write(struct comedi_device *dev, unsigned int value)
 {
 	if (devpriv->dac08_value == value)
 		return 1;
@@ -942,32 +940,32 @@ static int dac08_write(struct comedi_device * dev, unsigned int value)
 
 	outw(cal_enable_bits(dev) | (value & 0xff),
 		devpriv->control_status + CALIBRATION_REG);
-	comedi_udelay(1);
+	udelay(1);
 	outw(cal_enable_bits(dev) | SELECT_DAC08_BIT | (value & 0xff),
 		devpriv->control_status + CALIBRATION_REG);
-	comedi_udelay(1);
+	udelay(1);
 	outw(cal_enable_bits(dev) | (value & 0xff),
 		devpriv->control_status + CALIBRATION_REG);
-	comedi_udelay(1);
+	udelay(1);
 
 	return 1;
 }
 
-static int dac08_write_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dac08_write_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	return dac08_write(dev, data[0]);
 }
 
-static int dac08_read_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dac08_read_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	data[0] = devpriv->dac08_value;
 
 	return 1;
 }
 
-static int cb_pcidas_trimpot_write(struct comedi_device * dev,
+static int cb_pcidas_trimpot_write(struct comedi_device *dev,
 	unsigned int channel, unsigned int value)
 {
 	if (devpriv->trimpot_value[channel] == value)
@@ -990,16 +988,16 @@ static int cb_pcidas_trimpot_write(struct comedi_device * dev,
 	return 1;
 }
 
-static int trimpot_write_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int trimpot_write_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int channel = CR_CHAN(insn->chanspec);
 
 	return cb_pcidas_trimpot_write(dev, channel, data[0]);
 }
 
-static int trimpot_read_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int trimpot_read_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int channel = CR_CHAN(insn->chanspec);
 
@@ -1008,8 +1006,8 @@ static int trimpot_read_insn(struct comedi_device * dev, struct comedi_subdevice
 	return 1;
 }
 
-static int cb_pcidas_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int cb_pcidas_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	int tmp;
@@ -1066,7 +1064,7 @@ static int cb_pcidas_ai_cmdtest(struct comedi_device * dev, struct comedi_subdev
 	if (cmd->stop_src != TRIG_COUNT && cmd->stop_src != TRIG_NONE)
 		err++;
 
-	// make sure trigger sources are compatible with each other
+	/*  make sure trigger sources are compatible with each other */
 	if (cmd->scan_begin_src == TRIG_FOLLOW && cmd->convert_src == TRIG_NOW)
 		err++;
 	if (cmd->scan_begin_src != TRIG_FOLLOW && cmd->convert_src != TRIG_NOW)
@@ -1138,7 +1136,7 @@ static int cb_pcidas_ai_cmdtest(struct comedi_device * dev, struct comedi_subdev
 	if (err)
 		return 4;
 
-	// check channel/gain list against card's limitations
+	/*  check channel/gain list against card's limitations */
 	if (cmd->chanlist) {
 		gain = CR_RANGE(cmd->chanlist[0]);
 		start_chan = CR_CHAN(cmd->chanlist[0]);
@@ -1163,31 +1161,31 @@ static int cb_pcidas_ai_cmdtest(struct comedi_device * dev, struct comedi_subdev
 	return 0;
 }
 
-static int cb_pcidas_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int cb_pcidas_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct comedi_async *async = s->async;
 	struct comedi_cmd *cmd = &async->cmd;
 	unsigned int bits;
 	unsigned long flags;
 
-	// make sure CAL_EN_BIT is disabled
+	/*  make sure CAL_EN_BIT is disabled */
 	outw(0, devpriv->control_status + CALIBRATION_REG);
-	// initialize before settings pacer source and count values
+	/*  initialize before settings pacer source and count values */
 	outw(0, devpriv->control_status + TRIG_CONTSTAT);
-	// clear fifo
+	/*  clear fifo */
 	outw(0, devpriv->adc_fifo + ADCFIFOCLR);
 
-	// set mux limits, gain and pacer source
+	/*  set mux limits, gain and pacer source */
 	bits = BEGIN_SCAN(CR_CHAN(cmd->chanlist[0])) |
 		END_SCAN(CR_CHAN(cmd->chanlist[cmd->chanlist_len - 1])) |
 		GAIN_BITS(CR_RANGE(cmd->chanlist[0]));
-	// set unipolar/bipolar
+	/*  set unipolar/bipolar */
 	if (CR_RANGE(cmd->chanlist[0]) & IS_UNIPOLAR)
 		bits |= UNIP;
-	// set singleended/differential
+	/*  set singleended/differential */
 	if (CR_AREF(cmd->chanlist[0]) != AREF_DIFF)
 		bits |= SE;
-	// set pacer source
+	/*  set pacer source */
 	if (cmd->convert_src == TRIG_EXT || cmd->scan_begin_src == TRIG_EXT)
 		bits |= PACER_EXT_RISE;
 	else
@@ -1195,10 +1193,10 @@ static int cb_pcidas_ai_cmd(struct comedi_device * dev, struct comedi_subdevice
 	outw(bits, devpriv->control_status + ADCMUX_CONT);
 
 #ifdef CB_PCIDAS_DEBUG
-	rt_printk("comedi: sent 0x%x to adcmux control\n", bits);
+	printk("comedi: sent 0x%x to adcmux control\n", bits);
 #endif
 
-	// load counters
+	/*  load counters */
 	if (cmd->convert_src == TRIG_TIMER)
 		cb_pcidas_load_counters(dev, &cmd->convert_arg,
 			cmd->flags & TRIG_ROUND_MASK);
@@ -1206,31 +1204,31 @@ static int cb_pcidas_ai_cmd(struct comedi_device * dev, struct comedi_subdevice
 		cb_pcidas_load_counters(dev, &cmd->scan_begin_arg,
 			cmd->flags & TRIG_ROUND_MASK);
 
-	// set number of conversions
+	/*  set number of conversions */
 	if (cmd->stop_src == TRIG_COUNT) {
 		devpriv->count = cmd->chanlist_len * cmd->stop_arg;
 	}
-	// enable interrupts
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	/*  enable interrupts */
+	spin_lock_irqsave(&dev->spinlock, flags);
 	devpriv->adc_fifo_bits |= INTE;
 	devpriv->adc_fifo_bits &= ~INT_MASK;
 	if (cmd->flags & TRIG_WAKE_EOS) {
 		if (cmd->convert_src == TRIG_NOW && cmd->chanlist_len > 1)
-			devpriv->adc_fifo_bits |= INT_EOS;	// interrupt end of burst
+			devpriv->adc_fifo_bits |= INT_EOS;	/*  interrupt end of burst */
 		else
-			devpriv->adc_fifo_bits |= INT_FNE;	// interrupt fifo not empty
+			devpriv->adc_fifo_bits |= INT_FNE;	/*  interrupt fifo not empty */
 	} else {
-		devpriv->adc_fifo_bits |= INT_FHF;	//interrupt fifo half full
+		devpriv->adc_fifo_bits |= INT_FHF;	/* interrupt fifo half full */
 	}
 #ifdef CB_PCIDAS_DEBUG
-	rt_printk("comedi: adc_fifo_bits are 0x%x\n", devpriv->adc_fifo_bits);
+	printk("comedi: adc_fifo_bits are 0x%x\n", devpriv->adc_fifo_bits);
 #endif
-	// enable (and clear) interrupts
+	/*  enable (and clear) interrupts */
 	outw(devpriv->adc_fifo_bits | EOAI | INT | LADFUL,
 		devpriv->control_status + INT_ADCFIFO);
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
-	// set start trigger and burst mode
+	/*  set start trigger and burst mode */
 	bits = 0;
 	if (cmd->start_src == TRIG_NOW)
 		bits |= SW_TRIGGER;
@@ -1244,14 +1242,14 @@ static int cb_pcidas_ai_cmd(struct comedi_device * dev, struct comedi_subdevice
 		bits |= BURSTE;
 	outw(bits, devpriv->control_status + TRIG_CONTSTAT);
 #ifdef CB_PCIDAS_DEBUG
-	rt_printk("comedi: sent 0x%x to trig control\n", bits);
+	printk("comedi: sent 0x%x to trig control\n", bits);
 #endif
 
 	return 0;
 }
 
-static int cb_pcidas_ao_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int cb_pcidas_ao_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	int tmp;
@@ -1347,7 +1345,7 @@ static int cb_pcidas_ao_cmdtest(struct comedi_device * dev, struct comedi_subdev
 	if (err)
 		return 4;
 
-	// check channel/gain list against card's limitations
+	/*  check channel/gain list against card's limitations */
 	if (cmd->chanlist && cmd->chanlist_len > 1) {
 		if (CR_CHAN(cmd->chanlist[0]) != 0 ||
 			CR_CHAN(cmd->chanlist[1]) != 1) {
@@ -1363,32 +1361,32 @@ static int cb_pcidas_ao_cmdtest(struct comedi_device * dev, struct comedi_subdev
 	return 0;
 }
 
-static int cb_pcidas_ao_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int cb_pcidas_ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct comedi_async *async = s->async;
 	struct comedi_cmd *cmd = &async->cmd;
 	unsigned int i;
 	unsigned long flags;
 
-	// set channel limits, gain
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	/*  set channel limits, gain */
+	spin_lock_irqsave(&dev->spinlock, flags);
 	for (i = 0; i < cmd->chanlist_len; i++) {
-		// enable channel
+		/*  enable channel */
 		devpriv->ao_control_bits |=
 			DAC_CHAN_EN(CR_CHAN(cmd->chanlist[i]));
-		// set range
+		/*  set range */
 		devpriv->ao_control_bits |= DAC_RANGE(CR_CHAN(cmd->chanlist[i]),
 			CR_RANGE(cmd->chanlist[i]));
 	}
 
-	// disable analog out before settings pacer source and count values
+	/*  disable analog out before settings pacer source and count values */
 	outw(devpriv->ao_control_bits, devpriv->control_status + DAC_CSR);
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
-	// clear fifo
+	/*  clear fifo */
 	outw(0, devpriv->ao_registers + DACFIFOCLR);
 
-	// load counters
+	/*  load counters */
 	if (cmd->scan_begin_src == TRIG_TIMER) {
 		i8253_cascade_ns_to_timer_2div(TIMER_BASE,
 			&(devpriv->ao_divisor1), &(devpriv->ao_divisor2),
@@ -1400,12 +1398,12 @@ static int cb_pcidas_ao_cmd(struct comedi_device * dev, struct comedi_subdevice
 		i8254_load(devpriv->pacer_counter_dio + DAC8254, 0, 2,
 			devpriv->ao_divisor2, 2);
 	}
-	// set number of conversions
+	/*  set number of conversions */
 	if (cmd->stop_src == TRIG_COUNT) {
 		devpriv->ao_count = cmd->chanlist_len * cmd->stop_arg;
 	}
-	// set pacer source
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	/*  set pacer source */
+	spin_lock_irqsave(&dev->spinlock, flags);
 	switch (cmd->scan_begin_src) {
 	case TRIG_TIMER:
 		devpriv->ao_control_bits |= DAC_PACER_INT;
@@ -1414,12 +1412,12 @@ static int cb_pcidas_ao_cmd(struct comedi_device * dev, struct comedi_subdevice
 		devpriv->ao_control_bits |= DAC_PACER_EXT_RISE;
 		break;
 	default:
-		comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+		spin_unlock_irqrestore(&dev->spinlock, flags);
 		comedi_error(dev, "error setting dac pacer source");
 		return -1;
 		break;
 	}
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
 	async->inttrig = cb_pcidas_ao_inttrig;
 
@@ -1438,7 +1436,7 @@ static int cb_pcidas_ao_inttrig(struct comedi_device *dev,
 	if (trig_num != 0)
 		return -EINVAL;
 
-	// load up fifo
+	/*  load up fifo */
 	if (cmd->stop_src == TRIG_COUNT && devpriv->ao_count < num_points)
 		num_points = devpriv->ao_count;
 
@@ -1449,34 +1447,34 @@ static int cb_pcidas_ao_inttrig(struct comedi_device *dev,
 	if (cmd->stop_src == TRIG_COUNT) {
 		devpriv->ao_count -= num_points;
 	}
-	// write data to board's fifo
+	/*  write data to board's fifo */
 	outsw(devpriv->ao_registers + DACDATA, devpriv->ao_buffer, num_bytes);
 
-	// enable dac half-full and empty interrupts
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	/*  enable dac half-full and empty interrupts */
+	spin_lock_irqsave(&dev->spinlock, flags);
 	devpriv->adc_fifo_bits |= DAEMIE | DAHFIE;
 #ifdef CB_PCIDAS_DEBUG
-	rt_printk("comedi: adc_fifo_bits are 0x%x\n", devpriv->adc_fifo_bits);
+	printk("comedi: adc_fifo_bits are 0x%x\n", devpriv->adc_fifo_bits);
 #endif
-	// enable and clear interrupts
+	/*  enable and clear interrupts */
 	outw(devpriv->adc_fifo_bits | DAEMI | DAHFI,
 		devpriv->control_status + INT_ADCFIFO);
 
-	// start dac
+	/*  start dac */
 	devpriv->ao_control_bits |= DAC_START | DACEN | DAC_EMPTY;
 	outw(devpriv->ao_control_bits, devpriv->control_status + DAC_CSR);
 #ifdef CB_PCIDAS_DEBUG
-	rt_printk("comedi: sent 0x%x to dac control\n",
+	printk("comedi: sent 0x%x to dac control\n",
 		devpriv->ao_control_bits);
 #endif
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
 	async->inttrig = NULL;
 
 	return 0;
 }
 
-static irqreturn_t cb_pcidas_interrupt(int irq, void *d PT_REGS_ARG)
+static irqreturn_t cb_pcidas_interrupt(int irq, void *d)
 {
 	struct comedi_device *dev = (struct comedi_device *) d;
 	struct comedi_subdevice *s = dev->read_subdev;
@@ -1496,16 +1494,16 @@ static irqreturn_t cb_pcidas_interrupt(int irq, void *d PT_REGS_ARG)
 
 	s5933_status = inl(devpriv->s5933_config + AMCC_OP_REG_INTCSR);
 #ifdef CB_PCIDAS_DEBUG
-	rt_printk("intcsr 0x%x\n", s5933_status);
-	rt_printk("mbef 0x%x\n", inl(devpriv->s5933_config + AMCC_OP_REG_MBEF));
+	printk("intcsr 0x%x\n", s5933_status);
+	printk("mbef 0x%x\n", inl(devpriv->s5933_config + AMCC_OP_REG_MBEF));
 #endif
 
 	if ((INTCSR_INTR_ASSERTED & s5933_status) == 0)
 		return IRQ_NONE;
 
-	// make sure mailbox 4 is empty
+	/*  make sure mailbox 4 is empty */
 	inl_p(devpriv->s5933_config + AMCC_OP_REG_IMB4);
-	// clear interrupt on amcc s5933
+	/*  clear interrupt on amcc s5933 */
 	outl(devpriv->s5933_intcsr_bits | INTCSR_INBOX_INTR_STATUS,
 		devpriv->s5933_config + AMCC_OP_REG_INTCSR);
 
@@ -1516,14 +1514,14 @@ static irqreturn_t cb_pcidas_interrupt(int irq, void *d PT_REGS_ARG)
 	}
 #endif
 
-	// check for analog output interrupt
+	/*  check for analog output interrupt */
 	if (status & (DAHFI | DAEMI)) {
 		handle_ao_interrupt(dev, status);
 	}
-	// check for analog input interrupts
-	// if fifo half-full
+	/*  check for analog input interrupts */
+	/*  if fifo half-full */
 	if (status & ADHFI) {
-		// read data
+		/*  read data */
 		num_samples = half_fifo;
 		if (async->cmd.stop_src == TRIG_COUNT &&
 			num_samples > devpriv->count) {
@@ -1538,15 +1536,15 @@ static irqreturn_t cb_pcidas_interrupt(int irq, void *d PT_REGS_ARG)
 			async->events |= COMEDI_CB_EOA;
 			cb_pcidas_cancel(dev, s);
 		}
-		// clear half-full interrupt latch
-		comedi_spin_lock_irqsave(&dev->spinlock, flags);
+		/*  clear half-full interrupt latch */
+		spin_lock_irqsave(&dev->spinlock, flags);
 		outw(devpriv->adc_fifo_bits | INT,
 			devpriv->control_status + INT_ADCFIFO);
-		comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
-		// else if fifo not empty
+		spin_unlock_irqrestore(&dev->spinlock, flags);
+		/*  else if fifo not empty */
 	} else if (status & (ADNEI | EOBI)) {
 		for (i = 0; i < timeout; i++) {
-			// break if fifo is empty
+			/*  break if fifo is empty */
 			if ((ADNE & inw(devpriv->control_status +
 						INT_ADCFIFO)) == 0)
 				break;
@@ -1557,28 +1555,28 @@ static irqreturn_t cb_pcidas_interrupt(int irq, void *d PT_REGS_ARG)
 				break;
 			}
 		}
-		// clear not-empty interrupt latch
-		comedi_spin_lock_irqsave(&dev->spinlock, flags);
+		/*  clear not-empty interrupt latch */
+		spin_lock_irqsave(&dev->spinlock, flags);
 		outw(devpriv->adc_fifo_bits | INT,
 			devpriv->control_status + INT_ADCFIFO);
-		comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+		spin_unlock_irqrestore(&dev->spinlock, flags);
 	} else if (status & EOAI) {
 		comedi_error(dev,
 			"bug! encountered end of aquisition interrupt?");
-		// clear EOA interrupt latch
-		comedi_spin_lock_irqsave(&dev->spinlock, flags);
+		/*  clear EOA interrupt latch */
+		spin_lock_irqsave(&dev->spinlock, flags);
 		outw(devpriv->adc_fifo_bits | EOAI,
 			devpriv->control_status + INT_ADCFIFO);
-		comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+		spin_unlock_irqrestore(&dev->spinlock, flags);
 	}
-	//check for fifo overflow
+	/* check for fifo overflow */
 	if (status & LADFUL) {
 		comedi_error(dev, "fifo overflow");
-		// clear overflow interrupt latch
-		comedi_spin_lock_irqsave(&dev->spinlock, flags);
+		/*  clear overflow interrupt latch */
+		spin_lock_irqsave(&dev->spinlock, flags);
 		outw(devpriv->adc_fifo_bits | LADFUL,
 			devpriv->control_status + INT_ADCFIFO);
-		comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+		spin_unlock_irqrestore(&dev->spinlock, flags);
 		cb_pcidas_cancel(dev, s);
 		async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
 	}
@@ -1588,23 +1586,23 @@ static irqreturn_t cb_pcidas_interrupt(int irq, void *d PT_REGS_ARG)
 	return IRQ_HANDLED;
 }
 
-static void handle_ao_interrupt(struct comedi_device * dev, unsigned int status)
+static void handle_ao_interrupt(struct comedi_device *dev, unsigned int status)
 {
 	struct comedi_subdevice *s = dev->write_subdev;
 	struct comedi_async *async = s->async;
 	struct comedi_cmd *cmd = &async->cmd;
 	unsigned int half_fifo = thisboard->fifo_size / 2;
 	unsigned int num_points;
-	unsigned int flags;
+	unsigned long flags;
 
 	async->events = 0;
 
 	if (status & DAEMI) {
-		// clear dac empty interrupt latch
-		comedi_spin_lock_irqsave(&dev->spinlock, flags);
+		/*  clear dac empty interrupt latch */
+		spin_lock_irqsave(&dev->spinlock, flags);
 		outw(devpriv->adc_fifo_bits | DAEMI,
 			devpriv->control_status + INT_ADCFIFO);
-		comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+		spin_unlock_irqrestore(&dev->spinlock, flags);
 		if (inw(devpriv->ao_registers + DAC_CSR) & DAC_EMPTY) {
 			if (cmd->stop_src == TRIG_NONE ||
 				(cmd->stop_src == TRIG_COUNT
@@ -1618,7 +1616,7 @@ static void handle_ao_interrupt(struct comedi_device * dev, unsigned int status)
 	} else if (status & DAHFI) {
 		unsigned int num_bytes;
 
-		// figure out how many points we are writing to fifo
+		/*  figure out how many points we are writing to fifo */
 		num_points = half_fifo;
 		if (cmd->stop_src == TRIG_COUNT &&
 			devpriv->ao_count < num_points)
@@ -1631,33 +1629,33 @@ static void handle_ao_interrupt(struct comedi_device * dev, unsigned int status)
 		if (async->cmd.stop_src == TRIG_COUNT) {
 			devpriv->ao_count -= num_points;
 		}
-		// write data to board's fifo
+		/*  write data to board's fifo */
 		outsw(devpriv->ao_registers + DACDATA, devpriv->ao_buffer,
 			num_points);
-		// clear half-full interrupt latch
-		comedi_spin_lock_irqsave(&dev->spinlock, flags);
+		/*  clear half-full interrupt latch */
+		spin_lock_irqsave(&dev->spinlock, flags);
 		outw(devpriv->adc_fifo_bits | DAHFI,
 			devpriv->control_status + INT_ADCFIFO);
-		comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+		spin_unlock_irqrestore(&dev->spinlock, flags);
 	}
 
 	comedi_event(dev, s);
 }
 
 /* cancel analog input command */
-static int cb_pcidas_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int cb_pcidas_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
-	// disable interrupts
+	spin_lock_irqsave(&dev->spinlock, flags);
+	/*  disable interrupts */
 	devpriv->adc_fifo_bits &= ~INTE & ~EOAIE;
 	outw(devpriv->adc_fifo_bits, devpriv->control_status + INT_ADCFIFO);
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
-	// disable start trigger source and burst mode
+	/*  disable start trigger source and burst mode */
 	outw(0, devpriv->control_status + TRIG_CONTSTAT);
-	// software pacer source
+	/*  software pacer source */
 	outw(0, devpriv->control_status + ADCMUX_CONT);
 
 	return 0;
@@ -1669,20 +1667,20 @@ static int cb_pcidas_ao_cancel(struct comedi_device *dev,
 {
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
-	// disable interrupts
+	spin_lock_irqsave(&dev->spinlock, flags);
+	/*  disable interrupts */
 	devpriv->adc_fifo_bits &= ~DAHFIE & ~DAEMIE;
 	outw(devpriv->adc_fifo_bits, devpriv->control_status + INT_ADCFIFO);
 
-	// disable output
+	/*  disable output */
 	devpriv->ao_control_bits &= ~DACEN & ~DAC_PACER_MASK;
 	outw(devpriv->ao_control_bits, devpriv->control_status + DAC_CSR);
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
 	return 0;
 }
 
-static void cb_pcidas_load_counters(struct comedi_device * dev, unsigned int *ns,
+static void cb_pcidas_load_counters(struct comedi_device *dev, unsigned int *ns,
 	int rounding_flags)
 {
 	i8253_cascade_ns_to_timer_2div(TIMER_BASE, &(devpriv->divisor1),
@@ -1695,7 +1693,7 @@ static void cb_pcidas_load_counters(struct comedi_device * dev, unsigned int *ns
 		devpriv->divisor2, 2);
 }
 
-static void write_calibration_bitstream(struct comedi_device * dev,
+static void write_calibration_bitstream(struct comedi_device *dev,
 	unsigned int register_bits, unsigned int bitstream,
 	unsigned int bitstream_length)
 {
@@ -1707,18 +1705,18 @@ static void write_calibration_bitstream(struct comedi_device * dev,
 			register_bits |= SERIAL_DATA_IN_BIT;
 		else
 			register_bits &= ~SERIAL_DATA_IN_BIT;
-		comedi_udelay(write_delay);
+		udelay(write_delay);
 		outw(register_bits, devpriv->control_status + CALIBRATION_REG);
 	}
 }
 
-static int caldac_8800_write(struct comedi_device * dev, unsigned int address,
+static int caldac_8800_write(struct comedi_device *dev, unsigned int address,
 	uint8_t value)
 {
 	static const int num_caldac_channels = 8;
 	static const int bitstream_length = 11;
 	unsigned int bitstream = ((address & 0x7) << 8) | value;
-	static const int caldac_8800_comedi_udelay = 1;
+	static const int caldac_8800_udelay = 1;
 
 	if (address >= num_caldac_channels) {
 		comedi_error(dev, "illegal caldac channel");
@@ -1733,30 +1731,30 @@ static int caldac_8800_write(struct comedi_device * dev, unsigned int address,
 	write_calibration_bitstream(dev, cal_enable_bits(dev), bitstream,
 		bitstream_length);
 
-	comedi_udelay(caldac_8800_comedi_udelay);
+	udelay(caldac_8800_udelay);
 	outw(cal_enable_bits(dev) | SELECT_8800_BIT,
 		devpriv->control_status + CALIBRATION_REG);
-	comedi_udelay(caldac_8800_comedi_udelay);
+	udelay(caldac_8800_udelay);
 	outw(cal_enable_bits(dev), devpriv->control_status + CALIBRATION_REG);
 
 	return 1;
 }
 
-static int trimpot_7376_write(struct comedi_device * dev, uint8_t value)
+static int trimpot_7376_write(struct comedi_device *dev, uint8_t value)
 {
 	static const int bitstream_length = 7;
 	unsigned int bitstream = value & 0x7f;
 	unsigned int register_bits;
-	static const int ad7376_comedi_udelay = 1;
+	static const int ad7376_udelay = 1;
 
 	register_bits = cal_enable_bits(dev) | SELECT_TRIMPOT_BIT;
-	comedi_udelay(ad7376_comedi_udelay);
+	udelay(ad7376_udelay);
 	outw(register_bits, devpriv->control_status + CALIBRATION_REG);
 
 	write_calibration_bitstream(dev, register_bits, bitstream,
 		bitstream_length);
 
-	comedi_udelay(ad7376_comedi_udelay);
+	udelay(ad7376_udelay);
 	outw(cal_enable_bits(dev), devpriv->control_status + CALIBRATION_REG);
 
 	return 0;
@@ -1765,22 +1763,22 @@ static int trimpot_7376_write(struct comedi_device * dev, uint8_t value)
 /* For 1602/16 only
  * ch 0 : adc gain
  * ch 1 : adc postgain offset */
-static int trimpot_8402_write(struct comedi_device * dev, unsigned int channel,
+static int trimpot_8402_write(struct comedi_device *dev, unsigned int channel,
 	uint8_t value)
 {
 	static const int bitstream_length = 10;
 	unsigned int bitstream = ((channel & 0x3) << 8) | (value & 0xff);
 	unsigned int register_bits;
-	static const int ad8402_comedi_udelay = 1;
+	static const int ad8402_udelay = 1;
 
 	register_bits = cal_enable_bits(dev) | SELECT_TRIMPOT_BIT;
-	comedi_udelay(ad8402_comedi_udelay);
+	udelay(ad8402_udelay);
 	outw(register_bits, devpriv->control_status + CALIBRATION_REG);
 
 	write_calibration_bitstream(dev, register_bits, bitstream,
 		bitstream_length);
 
-	comedi_udelay(ad8402_comedi_udelay);
+	udelay(ad8402_udelay);
 	outw(cal_enable_bits(dev), devpriv->control_status + CALIBRATION_REG);
 
 	return 0;
@@ -1796,12 +1794,12 @@ static int wait_for_nvram_ready(unsigned long s5933_base_addr)
 					AMCC_OP_REG_MCSR_NVCMD) & MCSR_NV_BUSY)
 			== 0)
 			return 0;
-		comedi_udelay(1);
+		udelay(1);
 	}
 	return -1;
 }
 
-static int nvram_read(struct comedi_device * dev, unsigned int address, uint8_t * data)
+static int nvram_read(struct comedi_device *dev, unsigned int address, uint8_t *data)
 {
 	unsigned long iobase = devpriv->s5933_config;
 
diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c
index 1a580bd2247..210b462868b 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas64.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas64.c
@@ -85,6 +85,7 @@ TODO:
 
 #include "../comedidev.h"
 #include <linux/delay.h>
+#include <linux/interrupt.h>
 #include <asm/system.h>
 
 #include "comedi_pci.h"
@@ -93,17 +94,17 @@ TODO:
 #include "plx9080.h"
 #include "comedi_fc.h"
 
-#undef PCIDAS64_DEBUG		// disable debugging code
-//#define PCIDAS64_DEBUG        // enable debugging code
+#undef PCIDAS64_DEBUG		/*  disable debugging code */
+/* #define PCIDAS64_DEBUG         enable debugging code */
 
 #ifdef PCIDAS64_DEBUG
-#define DEBUG_PRINT(format, args...)  rt_printk(format , ## args )
+#define DEBUG_PRINT(format, args...)  printk(format , ## args)
 #else
 #define DEBUG_PRINT(format, args...)
 #endif
 
-#define TIMER_BASE 25		// 40MHz master clock
-#define PRESCALED_TIMER_BASE	10000	// 100kHz 'prescaled' clock for slow aquisition, maybe I'll support this someday
+#define TIMER_BASE 25		/*  40MHz master clock */
+#define PRESCALED_TIMER_BASE	10000	/*  100kHz 'prescaled' clock for slow aquisition, maybe I'll support this someday */
 #define DMA_BUFFER_SIZE 0x1000
 
 /* maximum value that can be loaded into board's 24-bit counters*/
@@ -111,41 +112,41 @@ static const int max_counter_value = 0xffffff;
 
 /* PCI-DAS64xxx base addresses */
 
-// indices of base address regions
+/* indices of base address regions */
 enum base_address_regions {
 	PLX9080_BADDRINDEX = 0,
 	MAIN_BADDRINDEX = 2,
 	DIO_COUNTER_BADDRINDEX = 3,
 };
 
-// priv(dev)->main_iobase registers
+/* priv(dev)->main_iobase registers */
 enum write_only_registers {
-	INTR_ENABLE_REG = 0x0,	// interrupt enable register
-	HW_CONFIG_REG = 0x2,	// hardware config register
+	INTR_ENABLE_REG = 0x0,	/*  interrupt enable register */
+	HW_CONFIG_REG = 0x2,	/*  hardware config register */
 	DAQ_SYNC_REG = 0xc,
 	DAQ_ATRIG_LOW_4020_REG = 0xc,
-	ADC_CONTROL0_REG = 0x10,	// adc control register 0
-	ADC_CONTROL1_REG = 0x12,	// adc control register 1
+	ADC_CONTROL0_REG = 0x10,	/*  adc control register 0 */
+	ADC_CONTROL1_REG = 0x12,	/*  adc control register 1 */
 	CALIBRATION_REG = 0x14,
-	ADC_SAMPLE_INTERVAL_LOWER_REG = 0x16,	// lower 16 bits of adc sample interval counter
-	ADC_SAMPLE_INTERVAL_UPPER_REG = 0x18,	// upper 8 bits of adc sample interval counter
-	ADC_DELAY_INTERVAL_LOWER_REG = 0x1a,	// lower 16 bits of delay interval counter
-	ADC_DELAY_INTERVAL_UPPER_REG = 0x1c,	// upper 8 bits of delay interval counter
-	ADC_COUNT_LOWER_REG = 0x1e,	// lower 16 bits of hardware conversion/scan counter
-	ADC_COUNT_UPPER_REG = 0x20,	// upper 8 bits of hardware conversion/scan counter
-	ADC_START_REG = 0x22,	// software trigger to start aquisition
-	ADC_CONVERT_REG = 0x24,	// initiates single conversion
-	ADC_QUEUE_CLEAR_REG = 0x26,	// clears adc queue
-	ADC_QUEUE_LOAD_REG = 0x28,	// loads adc queue
+	ADC_SAMPLE_INTERVAL_LOWER_REG = 0x16,	/*  lower 16 bits of adc sample interval counter */
+	ADC_SAMPLE_INTERVAL_UPPER_REG = 0x18,	/*  upper 8 bits of adc sample interval counter */
+	ADC_DELAY_INTERVAL_LOWER_REG = 0x1a,	/*  lower 16 bits of delay interval counter */
+	ADC_DELAY_INTERVAL_UPPER_REG = 0x1c,	/*  upper 8 bits of delay interval counter */
+	ADC_COUNT_LOWER_REG = 0x1e,	/*  lower 16 bits of hardware conversion/scan counter */
+	ADC_COUNT_UPPER_REG = 0x20,	/*  upper 8 bits of hardware conversion/scan counter */
+	ADC_START_REG = 0x22,	/*  software trigger to start aquisition */
+	ADC_CONVERT_REG = 0x24,	/*  initiates single conversion */
+	ADC_QUEUE_CLEAR_REG = 0x26,	/*  clears adc queue */
+	ADC_QUEUE_LOAD_REG = 0x28,	/*  loads adc queue */
 	ADC_BUFFER_CLEAR_REG = 0x2a,
-	ADC_QUEUE_HIGH_REG = 0x2c,	// high channel for internal queue, use adc_chan_bits() inline above
-	DAC_CONTROL0_REG = 0x50,	// dac control register 0
-	DAC_CONTROL1_REG = 0x52,	// dac control register 0
-	DAC_SAMPLE_INTERVAL_LOWER_REG = 0x54,	// lower 16 bits of dac sample interval counter
-	DAC_SAMPLE_INTERVAL_UPPER_REG = 0x56,	// upper 8 bits of dac sample interval counter
+	ADC_QUEUE_HIGH_REG = 0x2c,	/*  high channel for internal queue, use adc_chan_bits() inline above */
+	DAC_CONTROL0_REG = 0x50,	/*  dac control register 0 */
+	DAC_CONTROL1_REG = 0x52,	/*  dac control register 0 */
+	DAC_SAMPLE_INTERVAL_LOWER_REG = 0x54,	/*  lower 16 bits of dac sample interval counter */
+	DAC_SAMPLE_INTERVAL_UPPER_REG = 0x56,	/*  upper 8 bits of dac sample interval counter */
 	DAC_SELECT_REG = 0x60,
 	DAC_START_REG = 0x64,
-	DAC_BUFFER_CLEAR_REG = 0x66,	// clear dac buffer
+	DAC_BUFFER_CLEAR_REG = 0x66,	/*  clear dac buffer */
 };
 static inline unsigned int dac_convert_reg(unsigned int channel)
 {
@@ -161,7 +162,7 @@ static inline unsigned int dac_msb_4020_reg(unsigned int channel)
 }
 
 enum read_only_registers {
-	HW_STATUS_REG = 0x0,	// hardware status register, reading this apparently clears pending interrupts as well
+	HW_STATUS_REG = 0x0,	/*  hardware status register, reading this apparently clears pending interrupts as well */
 	PIPE1_READ_REG = 0x4,
 	ADC_READ_PNTR_REG = 0x8,
 	LOWER_XFER_REG = 0x10,
@@ -170,13 +171,13 @@ enum read_only_registers {
 };
 
 enum read_write_registers {
-	I8255_4020_REG = 0x48,	// 8255 offset, for 4020 only
-	ADC_QUEUE_FIFO_REG = 0x100,	// external channel/gain queue, uses same bits as ADC_QUEUE_LOAD_REG
+	I8255_4020_REG = 0x48,	/*  8255 offset, for 4020 only */
+	ADC_QUEUE_FIFO_REG = 0x100,	/*  external channel/gain queue, uses same bits as ADC_QUEUE_LOAD_REG */
 	ADC_FIFO_REG = 0x200,	/* adc data fifo */
 	DAC_FIFO_REG = 0x300,	/* dac data fifo, has weird interactions with external channel queue */
 };
 
-// priv(dev)->dio_counter_iobase registers
+/* priv(dev)->dio_counter_iobase registers */
 enum dio_counter_registers {
 	DIO_8255_OFFSET = 0x0,
 	DO_REG = 0x20,
@@ -185,47 +186,47 @@ enum dio_counter_registers {
 	DIO_DATA_60XX_REG = 0x48,
 };
 
-// bit definitions for write-only registers
+/* bit definitions for write-only registers */
 
 enum intr_enable_contents {
-	ADC_INTR_SRC_MASK = 0x3,	// bits that set adc interrupt source
-	ADC_INTR_QFULL_BITS = 0x0,	// interrupt fifo quater full
-	ADC_INTR_EOC_BITS = 0x1,	// interrupt end of conversion
-	ADC_INTR_EOSCAN_BITS = 0x2,	// interrupt end of scan
-	ADC_INTR_EOSEQ_BITS = 0x3,	// interrupt end of sequence (probably wont use this it's pretty fancy)
-	EN_ADC_INTR_SRC_BIT = 0x4,	// enable adc interrupt source
-	EN_ADC_DONE_INTR_BIT = 0x8,	// enable adc aquisition done interrupt
+	ADC_INTR_SRC_MASK = 0x3,	/*  bits that set adc interrupt source */
+	ADC_INTR_QFULL_BITS = 0x0,	/*  interrupt fifo quater full */
+	ADC_INTR_EOC_BITS = 0x1,	/*  interrupt end of conversion */
+	ADC_INTR_EOSCAN_BITS = 0x2,	/*  interrupt end of scan */
+	ADC_INTR_EOSEQ_BITS = 0x3,	/*  interrupt end of sequence (probably wont use this it's pretty fancy) */
+	EN_ADC_INTR_SRC_BIT = 0x4,	/*  enable adc interrupt source */
+	EN_ADC_DONE_INTR_BIT = 0x8,	/*  enable adc aquisition done interrupt */
 	DAC_INTR_SRC_MASK = 0x30,
 	DAC_INTR_QEMPTY_BITS = 0x0,
 	DAC_INTR_HIGH_CHAN_BITS = 0x10,
-	EN_DAC_INTR_SRC_BIT = 0x40,	// enable dac interrupt source
+	EN_DAC_INTR_SRC_BIT = 0x40,	/*  enable dac interrupt source */
 	EN_DAC_DONE_INTR_BIT = 0x80,
-	EN_ADC_ACTIVE_INTR_BIT = 0x200,	// enable adc active interrupt
-	EN_ADC_STOP_INTR_BIT = 0x400,	// enable adc stop trigger interrupt
-	EN_DAC_ACTIVE_INTR_BIT = 0x800,	// enable dac active interrupt
-	EN_DAC_UNDERRUN_BIT = 0x4000,	// enable dac underrun status bit
-	EN_ADC_OVERRUN_BIT = 0x8000,	// enable adc overrun status bit
+	EN_ADC_ACTIVE_INTR_BIT = 0x200,	/*  enable adc active interrupt */
+	EN_ADC_STOP_INTR_BIT = 0x400,	/*  enable adc stop trigger interrupt */
+	EN_DAC_ACTIVE_INTR_BIT = 0x800,	/*  enable dac active interrupt */
+	EN_DAC_UNDERRUN_BIT = 0x4000,	/*  enable dac underrun status bit */
+	EN_ADC_OVERRUN_BIT = 0x8000,	/*  enable adc overrun status bit */
 };
 
 enum hw_config_contents {
-	MASTER_CLOCK_4020_MASK = 0x3,	// bits that specify master clock source for 4020
-	INTERNAL_CLOCK_4020_BITS = 0x1,	// use 40 MHz internal master clock for 4020
-	BNC_CLOCK_4020_BITS = 0x2,	// use BNC input for master clock
-	EXT_CLOCK_4020_BITS = 0x3,	// use dio input for master clock
-	EXT_QUEUE_BIT = 0x200,	// use external channel/gain queue (more versatile than internal queue)
-	SLOW_DAC_BIT = 0x400,	// use 225 nanosec strobe when loading dac instead of 50 nanosec
-	HW_CONFIG_DUMMY_BITS = 0x2000,	// bit with unknown function yet given as default value in pci-das64 manual
-	DMA_CH_SELECT_BIT = 0x8000,	// bit selects channels 1/0 for analog input/output, otherwise 0/1
-	FIFO_SIZE_REG = 0x4,	// allows adjustment of fifo sizes
-	DAC_FIFO_SIZE_MASK = 0xff00,	// bits that set dac fifo size
+	MASTER_CLOCK_4020_MASK = 0x3,	/*  bits that specify master clock source for 4020 */
+	INTERNAL_CLOCK_4020_BITS = 0x1,	/*  use 40 MHz internal master clock for 4020 */
+	BNC_CLOCK_4020_BITS = 0x2,	/*  use BNC input for master clock */
+	EXT_CLOCK_4020_BITS = 0x3,	/*  use dio input for master clock */
+	EXT_QUEUE_BIT = 0x200,	/*  use external channel/gain queue (more versatile than internal queue) */
+	SLOW_DAC_BIT = 0x400,	/*  use 225 nanosec strobe when loading dac instead of 50 nanosec */
+	HW_CONFIG_DUMMY_BITS = 0x2000,	/*  bit with unknown function yet given as default value in pci-das64 manual */
+	DMA_CH_SELECT_BIT = 0x8000,	/*  bit selects channels 1/0 for analog input/output, otherwise 0/1 */
+	FIFO_SIZE_REG = 0x4,	/*  allows adjustment of fifo sizes */
+	DAC_FIFO_SIZE_MASK = 0xff00,	/*  bits that set dac fifo size */
 	DAC_FIFO_BITS = 0xf800,	/* 8k sample ao fifo */
 };
 #define DAC_FIFO_SIZE 0x2000
 
 enum daq_atrig_low_4020_contents {
-	EXT_AGATE_BNC_BIT = 0x8000,	// use trig/ext clk bnc input for analog gate signal
-	EXT_STOP_TRIG_BNC_BIT = 0x4000,	// use trig/ext clk bnc input for external stop trigger signal
-	EXT_START_TRIG_BNC_BIT = 0x2000,	// use trig/ext clk bnc input for external start trigger signal
+	EXT_AGATE_BNC_BIT = 0x8000,	/*  use trig/ext clk bnc input for analog gate signal */
+	EXT_STOP_TRIG_BNC_BIT = 0x4000,	/*  use trig/ext clk bnc input for external stop trigger signal */
+	EXT_START_TRIG_BNC_BIT = 0x2000,	/*  use trig/ext clk bnc input for external start trigger signal */
 };
 static inline uint16_t analog_trig_low_threshold_bits(uint16_t threshold)
 {
@@ -233,34 +234,34 @@ static inline uint16_t analog_trig_low_threshold_bits(uint16_t threshold)
 }
 
 enum adc_control0_contents {
-	ADC_GATE_SRC_MASK = 0x3,	// bits that select gate
-	ADC_SOFT_GATE_BITS = 0x1,	// software gate
-	ADC_EXT_GATE_BITS = 0x2,	// external digital gate
-	ADC_ANALOG_GATE_BITS = 0x3,	// analog level gate
-	ADC_GATE_LEVEL_BIT = 0x4,	// level-sensitive gate (for digital)
-	ADC_GATE_POLARITY_BIT = 0x8,	// gate active low
+	ADC_GATE_SRC_MASK = 0x3,	/*  bits that select gate */
+	ADC_SOFT_GATE_BITS = 0x1,	/*  software gate */
+	ADC_EXT_GATE_BITS = 0x2,	/*  external digital gate */
+	ADC_ANALOG_GATE_BITS = 0x3,	/*  analog level gate */
+	ADC_GATE_LEVEL_BIT = 0x4,	/*  level-sensitive gate (for digital) */
+	ADC_GATE_POLARITY_BIT = 0x8,	/*  gate active low */
 	ADC_START_TRIG_SOFT_BITS = 0x10,
 	ADC_START_TRIG_EXT_BITS = 0x20,
 	ADC_START_TRIG_ANALOG_BITS = 0x30,
 	ADC_START_TRIG_MASK = 0x30,
-	ADC_START_TRIG_FALLING_BIT = 0x40,	// trig 1 uses falling edge
-	ADC_EXT_CONV_FALLING_BIT = 0x800,	// external pacing uses falling edge
-	ADC_SAMPLE_COUNTER_EN_BIT = 0x1000,	// enable hardware scan counter
-	ADC_DMA_DISABLE_BIT = 0x4000,	// disables dma
-	ADC_ENABLE_BIT = 0x8000,	// master adc enable
+	ADC_START_TRIG_FALLING_BIT = 0x40,	/*  trig 1 uses falling edge */
+	ADC_EXT_CONV_FALLING_BIT = 0x800,	/*  external pacing uses falling edge */
+	ADC_SAMPLE_COUNTER_EN_BIT = 0x1000,	/*  enable hardware scan counter */
+	ADC_DMA_DISABLE_BIT = 0x4000,	/*  disables dma */
+	ADC_ENABLE_BIT = 0x8000,	/*  master adc enable */
 };
 
 enum adc_control1_contents {
-	ADC_QUEUE_CONFIG_BIT = 0x1,	// should be set for boards with > 16 channels
+	ADC_QUEUE_CONFIG_BIT = 0x1,	/*  should be set for boards with > 16 channels */
 	CONVERT_POLARITY_BIT = 0x10,
 	EOC_POLARITY_BIT = 0x20,
-	ADC_SW_GATE_BIT = 0x40,	// software gate of adc
-	ADC_DITHER_BIT = 0x200,	// turn on extra noise for dithering
+	ADC_SW_GATE_BIT = 0x40,	/*  software gate of adc */
+	ADC_DITHER_BIT = 0x200,	/*  turn on extra noise for dithering */
 	RETRIGGER_BIT = 0x800,
 	ADC_LO_CHANNEL_4020_MASK = 0x300,
 	ADC_HI_CHANNEL_4020_MASK = 0xc00,
-	TWO_CHANNEL_4020_BITS = 0x1000,	// two channel mode for 4020
-	FOUR_CHANNEL_4020_BITS = 0x2000,	// four channel mode for 4020
+	TWO_CHANNEL_4020_BITS = 0x1000,	/*  two channel mode for 4020 */
+	FOUR_CHANNEL_4020_BITS = 0x2000,	/*  four channel mode for 4020 */
 	CHANNEL_MODE_4020_MASK = 0x3000,
 	ADC_MODE_MASK = 0xf000,
 };
@@ -281,10 +282,10 @@ enum calibration_contents {
 	SELECT_8800_BIT = 0x1,
 	SELECT_8402_64XX_BIT = 0x2,
 	SELECT_1590_60XX_BIT = 0x2,
-	CAL_EN_64XX_BIT = 0x40,	// calibration enable for 64xx series
+	CAL_EN_64XX_BIT = 0x40,	/*  calibration enable for 64xx series */
 	SERIAL_DATA_IN_BIT = 0x80,
 	SERIAL_CLOCK_BIT = 0x100,
-	CAL_EN_60XX_BIT = 0x200,	// calibration enable for 60xx series
+	CAL_EN_60XX_BIT = 0x200,	/*  calibration enable for 60xx series */
 	CAL_GAIN_BIT = 0x800,
 };
 /* calibration sources for 6025 are:
@@ -308,11 +309,11 @@ static inline uint16_t adc_convert_chan_4020_bits(unsigned int channel)
 };
 
 enum adc_queue_load_contents {
-	UNIP_BIT = 0x800,	// unipolar/bipolar bit
-	ADC_SE_DIFF_BIT = 0x1000,	// single-ended/ differential bit
-	ADC_COMMON_BIT = 0x2000,	// non-referenced single-ended (common-mode input)
-	QUEUE_EOSEQ_BIT = 0x4000,	// queue end of sequence
-	QUEUE_EOSCAN_BIT = 0x8000,	// queue end of scan
+	UNIP_BIT = 0x800,	/*  unipolar/bipolar bit */
+	ADC_SE_DIFF_BIT = 0x1000,	/*  single-ended/ differential bit */
+	ADC_COMMON_BIT = 0x2000,	/*  non-referenced single-ended (common-mode input) */
+	QUEUE_EOSEQ_BIT = 0x4000,	/*  queue end of sequence */
+	QUEUE_EOSCAN_BIT = 0x8000,	/*  queue end of scan */
 };
 static inline uint16_t adc_chan_bits(unsigned int channel)
 {
@@ -320,7 +321,7 @@ static inline uint16_t adc_chan_bits(unsigned int channel)
 };
 
 enum dac_control0_contents {
-	DAC_ENABLE_BIT = 0x8000,	// dac controller enable bit
+	DAC_ENABLE_BIT = 0x8000,	/*  dac controller enable bit */
 	DAC_CYCLIC_STOP_BIT = 0x4000,
 	DAC_WAVEFORM_MODE_BIT = 0x100,
 	DAC_EXT_UPDATE_FALLING_BIT = 0x80,
@@ -340,14 +341,14 @@ enum dac_control1_contents {
 	DAC_WRITE_POLARITY_BIT = 0x800,	/* board-dependent setting */
 	DAC1_EXT_REF_BIT = 0x200,
 	DAC0_EXT_REF_BIT = 0x100,
-	DAC_OUTPUT_ENABLE_BIT = 0x80,	// dac output enable bit
+	DAC_OUTPUT_ENABLE_BIT = 0x80,	/*  dac output enable bit */
 	DAC_UPDATE_POLARITY_BIT = 0x40,	/* board-dependent setting */
 	DAC_SW_GATE_BIT = 0x20,
 	DAC1_UNIPOLAR_BIT = 0x8,
 	DAC0_UNIPOLAR_BIT = 0x2,
 };
 
-// bit definitions for read-only registers
+/* bit definitions for read-only registers */
 enum hw_status_contents {
 	DAC_UNDERRUN_BIT = 0x1,
 	ADC_OVERRUN_BIT = 0x2,
@@ -378,7 +379,7 @@ static inline unsigned int adc_upper_write_ptr_code(uint16_t prepost_bits)
 	return (prepost_bits >> 14) & 0x3;
 }
 
-// I2C addresses for 4020
+/* I2C addresses for 4020 */
 enum i2c_addresses {
 	RANGE_CAL_I2C_ADDR = 0x20,
 	CALDAC0_I2C_ADDR = 0xc,
@@ -386,8 +387,8 @@ enum i2c_addresses {
 };
 
 enum range_cal_i2c_contents {
-	ADC_SRC_4020_MASK = 0x70,	// bits that set what source the adc converter measures
-	BNC_TRIG_THRESHOLD_0V_BIT = 0x80,	// make bnc trig/ext clock threshold 0V instead of 2.5V
+	ADC_SRC_4020_MASK = 0x70,	/*  bits that set what source the adc converter measures */
+	BNC_TRIG_THRESHOLD_0V_BIT = 0x80,	/*  make bnc trig/ext clock threshold 0V instead of 2.5V */
 };
 static inline uint8_t adc_src_4020_bits(unsigned int source)
 {
@@ -395,11 +396,11 @@ static inline uint8_t adc_src_4020_bits(unsigned int source)
 };
 static inline uint8_t attenuate_bit(unsigned int channel)
 {
-	// attenuate channel (+-5V input range)
+	/*  attenuate channel (+-5V input range) */
 	return 1 << (channel & 0x3);
 };
 
-// analog input ranges for 64xx boards
+/* analog input ranges for 64xx boards */
 static const struct comedi_lrange ai_ranges_64xx = {
 	8,
 	{
@@ -468,7 +469,7 @@ static const struct comedi_lrange ai_ranges_6052 = {
 		}
 };
 
-// analog input ranges for 4020 board
+/* analog input ranges for 4020 board */
 static const struct comedi_lrange ai_ranges_4020 = {
 	2,
 	{
@@ -477,7 +478,7 @@ static const struct comedi_lrange ai_ranges_4020 = {
 		}
 };
 
-// analog output ranges
+/* analog output ranges */
 static const struct comedi_lrange ao_ranges_64xx = {
 	4,
 	{
@@ -543,40 +544,40 @@ struct hw_fifo_info {
 
 struct pcidas64_board {
 	const char *name;
-	int device_id;		// pci device id
-	int ai_se_chans;	// number of ai inputs in single-ended mode
-	int ai_bits;		// analog input resolution
-	int ai_speed;		// fastest conversion period in ns
+	int device_id;		/*  pci device id */
+	int ai_se_chans;	/*  number of ai inputs in single-ended mode */
+	int ai_bits;		/*  analog input resolution */
+	int ai_speed;		/*  fastest conversion period in ns */
 	const struct comedi_lrange *ai_range_table;
-	int ao_nchan;		// number of analog out channels
-	int ao_bits;		// analog output resolution
-	int ao_scan_speed;	// analog output speed (for a scan, not conversion)
+	int ao_nchan;		/*  number of analog out channels */
+	int ao_bits;		/*  analog output resolution */
+	int ao_scan_speed;	/*  analog output speed (for a scan, not conversion) */
 	const struct comedi_lrange *ao_range_table;
 	const int *ao_range_code;
 	const struct hw_fifo_info *const ai_fifo;
-	enum register_layout layout;	// different board families have slightly different registers
+	enum register_layout layout;	/*  different board families have slightly different registers */
 	unsigned has_8255:1;
 };
 
 static const struct hw_fifo_info ai_fifo_4020 = {
-      num_segments:2,
-      max_segment_length:0x8000,
-      sample_packing_ratio:2,
-      fifo_size_reg_mask:0x7f,
+	.num_segments = 2,
+	.max_segment_length = 0x8000,
+	.sample_packing_ratio = 2,
+	.fifo_size_reg_mask = 0x7f,
 };
 
 static const struct hw_fifo_info ai_fifo_64xx = {
-      num_segments:4,
-      max_segment_length:0x800,
-      sample_packing_ratio:1,
-      fifo_size_reg_mask:0x3f,
+	.num_segments = 4,
+	.max_segment_length = 0x800,
+	.sample_packing_ratio = 1,
+	.fifo_size_reg_mask = 0x3f,
 };
 
 static const struct hw_fifo_info ai_fifo_60xx = {
-      num_segments:4,
-      max_segment_length:0x800,
-      sample_packing_ratio:1,
-      fifo_size_reg_mask:0x7f,
+	.num_segments = 4,
+	.max_segment_length = 0x800,
+	.sample_packing_ratio = 1,
+	.fifo_size_reg_mask = 0x7f,
 };
 
 /* maximum number of dma transfers we will chain together into a ring
@@ -584,7 +585,7 @@ static const struct hw_fifo_info ai_fifo_60xx = {
 #define MAX_AI_DMA_RING_COUNT (0x80000 / DMA_BUFFER_SIZE)
 #define MIN_AI_DMA_RING_COUNT (0x10000 / DMA_BUFFER_SIZE)
 #define AO_DMA_RING_COUNT (0x10000 / DMA_BUFFER_SIZE)
-static inline unsigned int ai_dma_ring_count(struct pcidas64_board * board)
+static inline unsigned int ai_dma_ring_count(struct pcidas64_board *board)
 {
 	if (board->layout == LAYOUT_4020)
 		return MAX_AI_DMA_RING_COUNT;
@@ -596,84 +597,84 @@ static const int bytes_in_sample = 2;
 
 static const struct pcidas64_board pcidas64_boards[] = {
 	{
-	      name:	"pci-das6402/16",
-	      device_id:0x1d,
-	      ai_se_chans:64,
-	      ai_bits:	16,
-	      ai_speed:5000,
-	      ao_nchan:2,
-	      ao_bits:	16,
-	      ao_scan_speed:10000,
-	      layout:	LAYOUT_64XX,
-	      ai_range_table:&ai_ranges_64xx,
-	      ao_range_table:&ao_ranges_64xx,
-	      ao_range_code:ao_range_code_64xx,
-	      ai_fifo:	&ai_fifo_64xx,
-	      has_8255:1,
+	.name = "pci-das6402/16",
+	.device_id = 0x1d,
+	.ai_se_chans = 64,
+	.ai_bits = 16,
+	.ai_speed = 5000,
+	.ao_nchan = 2,
+	.ao_bits = 16,
+	.ao_scan_speed = 10000,
+	.layout = LAYOUT_64XX,
+	.ai_range_table = &ai_ranges_64xx,
+	.ao_range_table = &ao_ranges_64xx,
+	.ao_range_code = ao_range_code_64xx,
+	.ai_fifo = &ai_fifo_64xx,
+	.has_8255 = 1,
 		},
 	{
-	      name:	"pci-das6402/12",	// XXX check
-	      device_id:0x1e,
-	      ai_se_chans:64,
-	      ai_bits:	12,
-	      ai_speed:5000,
-	      ao_nchan:2,
-	      ao_bits:	12,
-	      ao_scan_speed:10000,
-	      layout:	LAYOUT_64XX,
-	      ai_range_table:&ai_ranges_64xx,
-	      ao_range_table:&ao_ranges_64xx,
-	      ao_range_code:ao_range_code_64xx,
-	      ai_fifo:	&ai_fifo_64xx,
-	      has_8255:1,
+	.name = "pci-das6402/12",	/*  XXX check */
+	.device_id = 0x1e,
+	.ai_se_chans = 64,
+	.ai_bits = 12,
+	.ai_speed = 5000,
+	.ao_nchan = 2,
+	.ao_bits = 12,
+	.ao_scan_speed = 10000,
+	.layout = LAYOUT_64XX,
+	.ai_range_table = &ai_ranges_64xx,
+	.ao_range_table = &ao_ranges_64xx,
+	.ao_range_code = ao_range_code_64xx,
+	.ai_fifo = &ai_fifo_64xx,
+	.has_8255 = 1,
 		},
 	{
-	      name:	"pci-das64/m1/16",
-	      device_id:0x35,
-	      ai_se_chans:64,
-	      ai_bits:	16,
-	      ai_speed:1000,
-	      ao_nchan:2,
-	      ao_bits:	16,
-	      ao_scan_speed:10000,
-	      layout:	LAYOUT_64XX,
-	      ai_range_table:&ai_ranges_64xx,
-	      ao_range_table:&ao_ranges_64xx,
-	      ao_range_code:ao_range_code_64xx,
-	      ai_fifo:	&ai_fifo_64xx,
-	      has_8255:1,
+	.name = "pci-das64/m1/16",
+	.device_id = 0x35,
+	.ai_se_chans = 64,
+	.ai_bits = 16,
+	.ai_speed = 1000,
+	.ao_nchan = 2,
+	.ao_bits = 16,
+	.ao_scan_speed = 10000,
+	.layout = LAYOUT_64XX,
+	.ai_range_table = &ai_ranges_64xx,
+	.ao_range_table = &ao_ranges_64xx,
+	.ao_range_code = ao_range_code_64xx,
+	.ai_fifo = &ai_fifo_64xx,
+	.has_8255 = 1,
 		},
 	{
-	      name:	"pci-das64/m2/16",
-	      device_id:0x36,
-	      ai_se_chans:64,
-	      ai_bits:	16,
-	      ai_speed:500,
-	      ao_nchan:2,
-	      ao_bits:	16,
-	      ao_scan_speed:10000,
-	      layout:	LAYOUT_64XX,
-	      ai_range_table:&ai_ranges_64xx,
-	      ao_range_table:&ao_ranges_64xx,
-	      ao_range_code:ao_range_code_64xx,
-	      ai_fifo:	&ai_fifo_64xx,
-	      has_8255:1,
+	.name = "pci-das64/m2/16",
+	.device_id = 0x36,
+	.ai_se_chans = 64,
+	.ai_bits = 16,
+	.ai_speed = 500,
+	.ao_nchan = 2,
+	.ao_bits = 16,
+	.ao_scan_speed = 10000,
+	.layout = LAYOUT_64XX,
+	.ai_range_table = &ai_ranges_64xx,
+	.ao_range_table = &ao_ranges_64xx,
+	.ao_range_code = ao_range_code_64xx,
+	.ai_fifo = &ai_fifo_64xx,
+	.has_8255 = 1,
 		},
 	{
-	      name:	"pci-das64/m3/16",
-	      device_id:0x37,
-	      ai_se_chans:64,
-	      ai_bits:	16,
-	      ai_speed:333,
-	      ao_nchan:2,
-	      ao_bits:	16,
-	      ao_scan_speed:10000,
-	      layout:	LAYOUT_64XX,
-	      ai_range_table:&ai_ranges_64xx,
-	      ao_range_table:&ao_ranges_64xx,
-	      ao_range_code:ao_range_code_64xx,
-	      ai_fifo:	&ai_fifo_64xx,
-	      has_8255:1,
+	.name = "pci-das64/m3/16",
+	.device_id = 0x37,
+	.ai_se_chans = 64,
+	.ai_bits = 16,
+	.ai_speed = 333,
+	.ao_nchan = 2,
+	.ao_bits = 16,
+	.ao_scan_speed = 10000,
+	.layout = LAYOUT_64XX,
+	.ai_range_table = &ai_ranges_64xx,
+	.ao_range_table = &ao_ranges_64xx,
+	.ao_range_code = ao_range_code_64xx,
+	.ai_fifo = &ai_fifo_64xx,
+	.has_8255 = 1,
 		},
 	{
 		.name = "pci-das6013",
@@ -691,334 +692,328 @@ static const struct pcidas64_board pcidas64_boards[] = {
 		.has_8255 = 0,
 		},
 	{
-	      name:	"pci-das6014",
-	      device_id:0x79,
-	      ai_se_chans:16,
-	      ai_bits:	16,
-	      ai_speed:5000,
-	      ao_nchan:2,
-	      ao_bits:	16,
-	      ao_scan_speed:100000,
-	      layout:	LAYOUT_60XX,
-	      ai_range_table:&ai_ranges_60xx,
-	      ao_range_table:&ao_ranges_60xx,
-	      ao_range_code:ao_range_code_60xx,
-	      ai_fifo:	&ai_fifo_60xx,
-	      has_8255:0,
+	.name = "pci-das6014",
+	.device_id = 0x79,
+	.ai_se_chans = 16,
+	.ai_bits = 16,
+	.ai_speed = 5000,
+	.ao_nchan = 2,
+	.ao_bits = 16,
+	.ao_scan_speed = 100000,
+	.layout = LAYOUT_60XX,
+	.ai_range_table = &ai_ranges_60xx,
+	.ao_range_table = &ao_ranges_60xx,
+	.ao_range_code = ao_range_code_60xx,
+	.ai_fifo = &ai_fifo_60xx,
+	.has_8255 = 0,
 		},
 	{
-	      name:	"pci-das6023",
-	      device_id:0x5d,
-	      ai_se_chans:16,
-	      ai_bits:	12,
-	      ai_speed:5000,
-	      ao_nchan:0,
-	      ao_scan_speed:100000,
-	      layout:	LAYOUT_60XX,
-	      ai_range_table:&ai_ranges_60xx,
-	      ao_range_table:&ao_ranges_60xx,
-	      ao_range_code:ao_range_code_60xx,
-	      ai_fifo:	&ai_fifo_60xx,
-	      has_8255:1,
+	.name = "pci-das6023",
+	.device_id = 0x5d,
+	.ai_se_chans = 16,
+	.ai_bits = 12,
+	.ai_speed = 5000,
+	.ao_nchan = 0,
+	.ao_scan_speed = 100000,
+	.layout = LAYOUT_60XX,
+	.ai_range_table = &ai_ranges_60xx,
+	.ao_range_table = &ao_ranges_60xx,
+	.ao_range_code = ao_range_code_60xx,
+	.ai_fifo = &ai_fifo_60xx,
+	.has_8255 = 1,
 		},
 	{
-	      name:	"pci-das6025",
-	      device_id:0x5e,
-	      ai_se_chans:16,
-	      ai_bits:	12,
-	      ai_speed:5000,
-	      ao_nchan:2,
-	      ao_bits:	12,
-	      ao_scan_speed:100000,
-	      layout:	LAYOUT_60XX,
-	      ai_range_table:&ai_ranges_60xx,
-	      ao_range_table:&ao_ranges_60xx,
-	      ao_range_code:ao_range_code_60xx,
-	      ai_fifo:	&ai_fifo_60xx,
-	      has_8255:1,
+	.name = "pci-das6025",
+	.device_id = 0x5e,
+	.ai_se_chans = 16,
+	.ai_bits = 12,
+	.ai_speed = 5000,
+	.ao_nchan = 2,
+	.ao_bits = 12,
+	.ao_scan_speed = 100000,
+	.layout = LAYOUT_60XX,
+	.ai_range_table = &ai_ranges_60xx,
+	.ao_range_table = &ao_ranges_60xx,
+	.ao_range_code = ao_range_code_60xx,
+	.ai_fifo = &ai_fifo_60xx,
+	.has_8255 = 1,
 		},
 	{
-	      name:	"pci-das6030",
-	      device_id:0x5f,
-	      ai_se_chans:16,
-	      ai_bits:	16,
-	      ai_speed:10000,
-	      ao_nchan:2,
-	      ao_bits:	16,
-	      ao_scan_speed:10000,
-	      layout:	LAYOUT_60XX,
-	      ai_range_table:&ai_ranges_6030,
-	      ao_range_table:&ao_ranges_6030,
-	      ao_range_code:ao_range_code_6030,
-	      ai_fifo:	&ai_fifo_60xx,
-	      has_8255:0,
+	.name = "pci-das6030",
+	.device_id = 0x5f,
+	.ai_se_chans = 16,
+	.ai_bits = 16,
+	.ai_speed = 10000,
+	.ao_nchan = 2,
+	.ao_bits = 16,
+	.ao_scan_speed = 10000,
+	.layout = LAYOUT_60XX,
+	.ai_range_table = &ai_ranges_6030,
+	.ao_range_table = &ao_ranges_6030,
+	.ao_range_code = ao_range_code_6030,
+	.ai_fifo = &ai_fifo_60xx,
+	.has_8255 = 0,
 		},
 	{
-	      name:	"pci-das6031",
-	      device_id:0x60,
-	      ai_se_chans:64,
-	      ai_bits:	16,
-	      ai_speed:10000,
-	      ao_nchan:2,
-	      ao_bits:	16,
-	      ao_scan_speed:10000,
-	      layout:	LAYOUT_60XX,
-	      ai_range_table:&ai_ranges_6030,
-	      ao_range_table:&ao_ranges_6030,
-	      ao_range_code:ao_range_code_6030,
-	      ai_fifo:	&ai_fifo_60xx,
-	      has_8255:0,
+	.name = "pci-das6031",
+	.device_id = 0x60,
+	.ai_se_chans = 64,
+	.ai_bits = 16,
+	.ai_speed = 10000,
+	.ao_nchan = 2,
+	.ao_bits = 16,
+	.ao_scan_speed = 10000,
+	.layout = LAYOUT_60XX,
+	.ai_range_table = &ai_ranges_6030,
+	.ao_range_table = &ao_ranges_6030,
+	.ao_range_code = ao_range_code_6030,
+	.ai_fifo = &ai_fifo_60xx,
+	.has_8255 = 0,
 		},
 	{
-	      name:	"pci-das6032",
-	      device_id:0x61,
-	      ai_se_chans:16,
-	      ai_bits:	16,
-	      ai_speed:10000,
-	      ao_nchan:0,
-	      layout:	LAYOUT_60XX,
-	      ai_range_table:&ai_ranges_6030,
-	      ai_fifo:	&ai_fifo_60xx,
-	      has_8255:0,
+	.name = "pci-das6032",
+	.device_id = 0x61,
+	.ai_se_chans = 16,
+	.ai_bits = 16,
+	.ai_speed = 10000,
+	.ao_nchan = 0,
+	.layout = LAYOUT_60XX,
+	.ai_range_table = &ai_ranges_6030,
+	.ai_fifo = &ai_fifo_60xx,
+	.has_8255 = 0,
 		},
 	{
-	      name:	"pci-das6033",
-	      device_id:0x62,
-	      ai_se_chans:64,
-	      ai_bits:	16,
-	      ai_speed:10000,
-	      ao_nchan:0,
-	      layout:	LAYOUT_60XX,
-	      ai_range_table:&ai_ranges_6030,
-	      ai_fifo:	&ai_fifo_60xx,
-	      has_8255:0,
+	.name = "pci-das6033",
+	.device_id = 0x62,
+	.ai_se_chans = 64,
+	.ai_bits = 16,
+	.ai_speed = 10000,
+	.ao_nchan = 0,
+	.layout = LAYOUT_60XX,
+	.ai_range_table = &ai_ranges_6030,
+	.ai_fifo = &ai_fifo_60xx,
+	.has_8255 = 0,
 		},
 	{
-	      name:	"pci-das6034",
-	      device_id:0x63,
-	      ai_se_chans:16,
-	      ai_bits:	16,
-	      ai_speed:5000,
-	      ao_nchan:0,
-	      ao_scan_speed:0,
-	      layout:	LAYOUT_60XX,
-	      ai_range_table:&ai_ranges_60xx,
-	      ai_fifo:	&ai_fifo_60xx,
-	      has_8255:0,
+	.name = "pci-das6034",
+	.device_id = 0x63,
+	.ai_se_chans = 16,
+	.ai_bits = 16,
+	.ai_speed = 5000,
+	.ao_nchan = 0,
+	.ao_scan_speed = 0,
+	.layout = LAYOUT_60XX,
+	.ai_range_table = &ai_ranges_60xx,
+	.ai_fifo = &ai_fifo_60xx,
+	.has_8255 = 0,
 		},
 	{
-	      name:	"pci-das6035",
-	      device_id:0x64,
-	      ai_se_chans:16,
-	      ai_bits:	16,
-	      ai_speed:5000,
-	      ao_nchan:2,
-	      ao_bits:	12,
-	      ao_scan_speed:100000,
-	      layout:	LAYOUT_60XX,
-	      ai_range_table:&ai_ranges_60xx,
-	      ao_range_table:&ao_ranges_60xx,
-	      ao_range_code:ao_range_code_60xx,
-	      ai_fifo:	&ai_fifo_60xx,
-	      has_8255:0,
+	.name = "pci-das6035",
+	.device_id = 0x64,
+	.ai_se_chans = 16,
+	.ai_bits = 16,
+	.ai_speed = 5000,
+	.ao_nchan = 2,
+	.ao_bits = 12,
+	.ao_scan_speed = 100000,
+	.layout = LAYOUT_60XX,
+	.ai_range_table = &ai_ranges_60xx,
+	.ao_range_table = &ao_ranges_60xx,
+	.ao_range_code = ao_range_code_60xx,
+	.ai_fifo = &ai_fifo_60xx,
+	.has_8255 = 0,
 		},
 	{
-	      name:	"pci-das6036",
-	      device_id:0x6f,
-	      ai_se_chans:16,
-	      ai_bits:	16,
-	      ai_speed:5000,
-	      ao_nchan:2,
-	      ao_bits:	16,
-	      ao_scan_speed:100000,
-	      layout:	LAYOUT_60XX,
-	      ai_range_table:&ai_ranges_60xx,
-	      ao_range_table:&ao_ranges_60xx,
-	      ao_range_code:ao_range_code_60xx,
-	      ai_fifo:	&ai_fifo_60xx,
-	      has_8255:0,
+	.name = "pci-das6036",
+	.device_id = 0x6f,
+	.ai_se_chans = 16,
+	.ai_bits = 16,
+	.ai_speed = 5000,
+	.ao_nchan = 2,
+	.ao_bits = 16,
+	.ao_scan_speed = 100000,
+	.layout = LAYOUT_60XX,
+	.ai_range_table = &ai_ranges_60xx,
+	.ao_range_table = &ao_ranges_60xx,
+	.ao_range_code = ao_range_code_60xx,
+	.ai_fifo = &ai_fifo_60xx,
+	.has_8255 = 0,
 		},
 	{
-	      name:	"pci-das6040",
-	      device_id:0x65,
-	      ai_se_chans:16,
-	      ai_bits:	12,
-	      ai_speed:2000,
-	      ao_nchan:2,
-	      ao_bits:	12,
-	      ao_scan_speed:1000,
-	      layout:	LAYOUT_60XX,
-	      ai_range_table:&ai_ranges_6052,
-	      ao_range_table:&ao_ranges_6030,
-	      ao_range_code:ao_range_code_6030,
-	      ai_fifo:	&ai_fifo_60xx,
-	      has_8255:0,
+	.name = "pci-das6040",
+	.device_id = 0x65,
+	.ai_se_chans = 16,
+	.ai_bits = 12,
+	.ai_speed = 2000,
+	.ao_nchan = 2,
+	.ao_bits = 12,
+	.ao_scan_speed = 1000,
+	.layout = LAYOUT_60XX,
+	.ai_range_table = &ai_ranges_6052,
+	.ao_range_table = &ao_ranges_6030,
+	.ao_range_code = ao_range_code_6030,
+	.ai_fifo = &ai_fifo_60xx,
+	.has_8255 = 0,
 		},
 	{
-	      name:	"pci-das6052",
-	      device_id:0x66,
-	      ai_se_chans:16,
-	      ai_bits:	16,
-	      ai_speed:3333,
-	      ao_nchan:2,
-	      ao_bits:	16,
-	      ao_scan_speed:3333,
-	      layout:	LAYOUT_60XX,
-	      ai_range_table:&ai_ranges_6052,
-	      ao_range_table:&ao_ranges_6030,
-	      ao_range_code:ao_range_code_6030,
-	      ai_fifo:	&ai_fifo_60xx,
-	      has_8255:0,
+	.name = "pci-das6052",
+	.device_id = 0x66,
+	.ai_se_chans = 16,
+	.ai_bits = 16,
+	.ai_speed = 3333,
+	.ao_nchan = 2,
+	.ao_bits = 16,
+	.ao_scan_speed = 3333,
+	.layout = LAYOUT_60XX,
+	.ai_range_table = &ai_ranges_6052,
+	.ao_range_table = &ao_ranges_6030,
+	.ao_range_code = ao_range_code_6030,
+	.ai_fifo = &ai_fifo_60xx,
+	.has_8255 = 0,
 		},
 	{
-	      name:	"pci-das6070",
-	      device_id:0x67,
-	      ai_se_chans:16,
-	      ai_bits:	12,
-	      ai_speed:800,
-	      ao_nchan:2,
-	      ao_bits:	12,
-	      ao_scan_speed:1000,
-	      layout:	LAYOUT_60XX,
-	      ai_range_table:&ai_ranges_6052,
-	      ao_range_table:&ao_ranges_6030,
-	      ao_range_code:ao_range_code_6030,
-	      ai_fifo:	&ai_fifo_60xx,
-	      has_8255:0,
+	.name = "pci-das6070",
+	.device_id = 0x67,
+	.ai_se_chans = 16,
+	.ai_bits = 12,
+	.ai_speed = 800,
+	.ao_nchan = 2,
+	.ao_bits = 12,
+	.ao_scan_speed = 1000,
+	.layout = LAYOUT_60XX,
+	.ai_range_table = &ai_ranges_6052,
+	.ao_range_table = &ao_ranges_6030,
+	.ao_range_code = ao_range_code_6030,
+	.ai_fifo = &ai_fifo_60xx,
+	.has_8255 = 0,
 		},
 	{
-	      name:	"pci-das6071",
-	      device_id:0x68,
-	      ai_se_chans:64,
-	      ai_bits:	12,
-	      ai_speed:800,
-	      ao_nchan:2,
-	      ao_bits:	12,
-	      ao_scan_speed:1000,
-	      layout:	LAYOUT_60XX,
-	      ai_range_table:&ai_ranges_6052,
-	      ao_range_table:&ao_ranges_6030,
-	      ao_range_code:ao_range_code_6030,
-	      ai_fifo:	&ai_fifo_60xx,
-	      has_8255:0,
+	.name = "pci-das6071",
+	.device_id = 0x68,
+	.ai_se_chans = 64,
+	.ai_bits = 12,
+	.ai_speed = 800,
+	.ao_nchan = 2,
+	.ao_bits = 12,
+	.ao_scan_speed = 1000,
+	.layout = LAYOUT_60XX,
+	.ai_range_table = &ai_ranges_6052,
+	.ao_range_table = &ao_ranges_6030,
+	.ao_range_code = ao_range_code_6030,
+	.ai_fifo = &ai_fifo_60xx,
+	.has_8255 = 0,
 		},
 	{
-	      name:	"pci-das4020/12",
-	      device_id:0x52,
-	      ai_se_chans:4,
-	      ai_bits:	12,
-	      ai_speed:50,
-	      ao_bits:	12,
-	      ao_nchan:2,
-	      ao_scan_speed:0,	// no hardware pacing on ao
-	      layout:	LAYOUT_4020,
-	      ai_range_table:&ai_ranges_4020,
-	      ao_range_table:&ao_ranges_4020,
-	      ao_range_code:ao_range_code_4020,
-	      ai_fifo:	&ai_fifo_4020,
-	      has_8255:1,
+	.name = "pci-das4020/12",
+	.device_id = 0x52,
+	.ai_se_chans = 4,
+	.ai_bits = 12,
+	.ai_speed = 50,
+	.ao_bits = 12,
+	.ao_nchan = 2,
+	.ao_scan_speed = 0,	/*  no hardware pacing on ao */
+	.layout = LAYOUT_4020,
+	.ai_range_table = &ai_ranges_4020,
+	.ao_range_table = &ao_ranges_4020,
+	.ao_range_code = ao_range_code_4020,
+	.ai_fifo = &ai_fifo_4020,
+	.has_8255 = 1,
 		},
 #if 0
 	{
-	      name:	"pci-das6402/16/jr",
-	      device_id:0	// XXX,
-	      ai_se_chans:64,
-	      ai_bits:	16,
-	      ai_speed:5000,
-	      ao_nchan:0,
-	      ao_scan_speed:10000,
-	      layout:	LAYOUT_64XX,
-	      ai_range_table:&ai_ranges_64xx,
-	      ai_fifo:	ai_fifo_64xx,
-	      has_8255:1,
+	.name = "pci-das6402/16/jr",
+	.device_id = 0	/*  XXX, */
+	.ai_se_chans = 64,
+	.ai_bits = 16,
+	.ai_speed = 5000,
+	.ao_nchan = 0,
+	.ao_scan_speed = 10000,
+	.layout = LAYOUT_64XX,
+	.ai_range_table = &ai_ranges_64xx,
+	.ai_fifo = ai_fifo_64xx,
+	.has_8255 = 1,
 		},
 	{
-	      name:	"pci-das64/m1/16/jr",
-	      device_id:0	// XXX,
-	      ai_se_chans:64,
-	      ai_bits:	16,
-	      ai_speed:1000,
-	      ao_nchan:0,
-	      ao_scan_speed:10000,
-	      layout:	LAYOUT_64XX,
-	      ai_range_table:&ai_ranges_64xx,
-	      ai_fifo:	ai_fifo_64xx,
-	      has_8255:1,
+	.name = "pci-das64/m1/16/jr",
+	.device_id = 0	/*  XXX, */
+	.ai_se_chans = 64,
+	.ai_bits = 16,
+	.ai_speed = 1000,
+	.ao_nchan = 0,
+	.ao_scan_speed = 10000,
+	.layout = LAYOUT_64XX,
+	.ai_range_table = &ai_ranges_64xx,
+	.ai_fifo = ai_fifo_64xx,
+	.has_8255 = 1,
 		},
 	{
-	      name:	"pci-das64/m2/16/jr",
-	      device_id:0	// XXX,
-	      ai_se_chans:64,
-	      ai_bits:	16,
-	      ai_speed:500,
-	      ao_nchan:0,
-	      ao_scan_speed:10000,
-	      layout:	LAYOUT_64XX,
-	      ai_range_table:&ai_ranges_64xx,
-	      ai_fifo:	ai_fifo_64xx,
-	      has_8255:1,
+	.name = "pci-das64/m2/16/jr",
+	.device_id = 0	/*  XXX, */
+	.ai_se_chans = 64,
+	.ai_bits = 16,
+	.ai_speed = 500,
+	.ao_nchan = 0,
+	.ao_scan_speed = 10000,
+	.layout = LAYOUT_64XX,
+	.ai_range_table = &ai_ranges_64xx,
+	.ai_fifo = ai_fifo_64xx,
+	.has_8255 = 1,
 		},
 	{
-	      name:	"pci-das64/m3/16/jr",
-	      device_id:0	// XXX,
-	      ai_se_chans:64,
-	      ai_bits:	16,
-	      ai_speed:333,
-	      ao_nchan:0,
-	      ao_scan_speed:10000,
-	      layout:	LAYOUT_64XX,
-	      ai_range_table:&ai_ranges_64xx,
-	      ai_fifo:	ai_fifo_64xx,
-	      has_8255:1,
+	.name = "pci-das64/m3/16/jr",
+	.device_id = 0	/*  XXX, */
+	.ai_se_chans = 64,
+	.ai_bits = 16,
+	.ai_speed = 333,
+	.ao_nchan = 0,
+	.ao_scan_speed = 10000,
+	.layout = LAYOUT_64XX,
+	.ai_range_table = &ai_ranges_64xx,
+	.ai_fifo = ai_fifo_64xx,
+	.has_8255 = 1,
 		},
 	{
-	      name:	"pci-das64/m1/14",
-	      device_id:0,	// XXX
-	      ai_se_chans:64,
-	      ai_bits:	14,
-	      ai_speed:1000,
-	      ao_nchan:2,
-	      ao_scan_speed:10000,
-	      layout:	LAYOUT_64XX,
-	      ai_range_table:&ai_ranges_64xx,
-	      ai_fifo:	ai_fifo_64xx,
-	      has_8255:1,
+	.name = "pci-das64/m1/14",
+	.device_id = 0,	/*  XXX */
+	.ai_se_chans = 64,
+	.ai_bits = 14,
+	.ai_speed = 1000,
+	.ao_nchan = 2,
+	.ao_scan_speed = 10000,
+	.layout = LAYOUT_64XX,
+	.ai_range_table = &ai_ranges_64xx,
+	.ai_fifo = ai_fifo_64xx,
+	.has_8255 = 1,
 		},
 	{
-	      name:	"pci-das64/m2/14",
-	      device_id:0,	// XXX
-	      ai_se_chans:64,
-	      ai_bits:	14,
-	      ai_speed:500,
-	      ao_nchan:2,
-	      ao_scan_speed:10000,
-	      layout:	LAYOUT_64XX,
-	      ai_range_table:&ai_ranges_64xx,
-	      ai_fifo:	ai_fifo_64xx,
-	      has_8255:1,
+	.name = "pci-das64/m2/14",
+	.device_id = 0,	/*  XXX */
+	.ai_se_chans = 64,
+	.ai_bits = 14,
+	.ai_speed = 500,
+	.ao_nchan = 2,
+	.ao_scan_speed = 10000,
+	.layout = LAYOUT_64XX,
+	.ai_range_table = &ai_ranges_64xx,
+	.ai_fifo = ai_fifo_64xx,
+	.has_8255 = 1,
 		},
 	{
-	      name:	"pci-das64/m3/14",
-	      device_id:0,	// XXX
-	      ai_se_chans:64,
-	      ai_bits:	14,
-	      ai_speed:333,
-	      ao_nchan:2,
-	      ao_scan_speed:10000,
-	      layout:	LAYOUT_64XX,
-	      ai_range_table:&ai_ranges_64xx,
-	      ai_fifo:	ai_fifo_64xx,
-	      has_8255:1,
+	.name = "pci-das64/m3/14",
+	.device_id = 0,	/*  XXX */
+	.ai_se_chans = 64,
+	.ai_bits = 14,
+	.ai_speed = 333,
+	.ao_nchan = 2,
+	.ao_scan_speed = 10000,
+	.layout = LAYOUT_64XX,
+	.ai_range_table = &ai_ranges_64xx,
+	.ai_fifo = ai_fifo_64xx,
+	.has_8255 = 1,
 		},
 #endif
 };
 
-// Number of boards in cb_pcidas_boards
-static inline unsigned int num_boards(void)
-{
-	return sizeof(pcidas64_boards) / sizeof(struct pcidas64_board);
-}
-
 static DEFINE_PCI_DEVICE_TABLE(pcidas64_pci_table) = {
 	{PCI_VENDOR_ID_COMPUTERBOARDS, 0x001d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{PCI_VENDOR_ID_COMPUTERBOARDS, 0x001e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
@@ -1049,7 +1044,7 @@ static inline struct pcidas64_board *board(const struct comedi_device * dev)
 	return (struct pcidas64_board *) dev->board_ptr;
 }
 
-static inline unsigned short se_diff_bit_6xxx(struct comedi_device * dev,
+static inline unsigned short se_diff_bit_6xxx(struct comedi_device *dev,
 	int use_differential)
 {
 	if ((board(dev)->layout == LAYOUT_64XX && !use_differential) ||
@@ -1060,50 +1055,50 @@ static inline unsigned short se_diff_bit_6xxx(struct comedi_device * dev,
 };
 
 struct ext_clock_info {
-	unsigned int divisor;	// master clock divisor to use for scans with external master clock
-	unsigned int chanspec;	// chanspec for master clock input when used as scan begin src
+	unsigned int divisor;	/*  master clock divisor to use for scans with external master clock */
+	unsigned int chanspec;	/*  chanspec for master clock input when used as scan begin src */
 };
 
 /* this structure is for data unique to this hardware driver. */
 struct pcidas64_private {
 
-	struct pci_dev *hw_dev;	// pointer to board's pci_dev struct
-	// base addresses (physical)
+	struct pci_dev *hw_dev;	/*  pointer to board's pci_dev struct */
+	/*  base addresses (physical) */
 	resource_size_t plx9080_phys_iobase;
 	resource_size_t main_phys_iobase;
 	resource_size_t dio_counter_phys_iobase;
-	// base addresses (ioremapped)
+	/*  base addresses (ioremapped) */
 	void *plx9080_iobase;
 	void *main_iobase;
 	void *dio_counter_iobase;
-	// local address (used by dma controller)
+	/*  local address (used by dma controller) */
 	uint32_t local0_iobase;
 	uint32_t local1_iobase;
-	volatile unsigned int ai_count;	// number of analog input samples remaining
-	uint16_t *ai_buffer[MAX_AI_DMA_RING_COUNT];	// dma buffers for analog input
-	dma_addr_t ai_buffer_bus_addr[MAX_AI_DMA_RING_COUNT];	// physical addresses of ai dma buffers
-	struct plx_dma_desc *ai_dma_desc;	// array of ai dma descriptors read by plx9080, allocated to get proper alignment
-	dma_addr_t ai_dma_desc_bus_addr;	// physical address of ai dma descriptor array
-	volatile unsigned int ai_dma_index;	// index of the ai dma descriptor/buffer that is currently being used
-	uint16_t *ao_buffer[AO_DMA_RING_COUNT];	// dma buffers for analog output
-	dma_addr_t ao_buffer_bus_addr[AO_DMA_RING_COUNT];	// physical addresses of ao dma buffers
+	volatile unsigned int ai_count;	/*  number of analog input samples remaining */
+	uint16_t *ai_buffer[MAX_AI_DMA_RING_COUNT];	/*  dma buffers for analog input */
+	dma_addr_t ai_buffer_bus_addr[MAX_AI_DMA_RING_COUNT];	/*  physical addresses of ai dma buffers */
+	struct plx_dma_desc *ai_dma_desc;	/*  array of ai dma descriptors read by plx9080, allocated to get proper alignment */
+	dma_addr_t ai_dma_desc_bus_addr;	/*  physical address of ai dma descriptor array */
+	volatile unsigned int ai_dma_index;	/*  index of the ai dma descriptor/buffer that is currently being used */
+	uint16_t *ao_buffer[AO_DMA_RING_COUNT];	/*  dma buffers for analog output */
+	dma_addr_t ao_buffer_bus_addr[AO_DMA_RING_COUNT];	/*  physical addresses of ao dma buffers */
 	struct plx_dma_desc *ao_dma_desc;
 	dma_addr_t ao_dma_desc_bus_addr;
-	volatile unsigned int ao_dma_index;	// keeps track of buffer where the next ao sample should go
-	volatile unsigned long ao_count;	// number of analog output samples remaining
-	volatile unsigned int ao_value[2];	// remember what the analog outputs are set to, to allow readback
-	unsigned int hw_revision;	// stc chip hardware revision number
-	volatile unsigned int intr_enable_bits;	// last bits sent to INTR_ENABLE_REG register
-	volatile uint16_t adc_control1_bits;	// last bits sent to ADC_CONTROL1_REG register
-	volatile uint16_t fifo_size_bits;	// last bits sent to FIFO_SIZE_REG register
-	volatile uint16_t hw_config_bits;	// last bits sent to HW_CONFIG_REG register
+	volatile unsigned int ao_dma_index;	/*  keeps track of buffer where the next ao sample should go */
+	volatile unsigned long ao_count;	/*  number of analog output samples remaining */
+	volatile unsigned int ao_value[2];	/*  remember what the analog outputs are set to, to allow readback */
+	unsigned int hw_revision;	/*  stc chip hardware revision number */
+	volatile unsigned int intr_enable_bits;	/*  last bits sent to INTR_ENABLE_REG register */
+	volatile uint16_t adc_control1_bits;	/*  last bits sent to ADC_CONTROL1_REG register */
+	volatile uint16_t fifo_size_bits;	/*  last bits sent to FIFO_SIZE_REG register */
+	volatile uint16_t hw_config_bits;	/*  last bits sent to HW_CONFIG_REG register */
 	volatile uint16_t dac_control1_bits;
-	volatile uint32_t plx_control_bits;	// last bits written to plx9080 control register
-	volatile uint32_t plx_intcsr_bits;	// last bits written to plx interrupt control and status register
-	volatile int calibration_source;	// index of calibration source readable through ai ch0
-	volatile uint8_t i2c_cal_range_bits;	// bits written to i2c calibration/range register
-	volatile unsigned int ext_trig_falling;	// configure digital triggers to trigger on falling edge
-	// states of various devices stored to enable read-back
+	volatile uint32_t plx_control_bits;	/*  last bits written to plx9080 control register */
+	volatile uint32_t plx_intcsr_bits;	/*  last bits written to plx interrupt control and status register */
+	volatile int calibration_source;	/*  index of calibration source readable through ai ch0 */
+	volatile uint8_t i2c_cal_range_bits;	/*  bits written to i2c calibration/range register */
+	volatile unsigned int ext_trig_falling;	/*  configure digital triggers to trigger on falling edge */
+	/*  states of various devices stored to enable read-back */
 	unsigned int ad8402_state[2];
 	unsigned int caldac_state[8];
 	volatile short ai_cmd_running;
@@ -1127,82 +1122,82 @@ static inline struct pcidas64_private *priv(struct comedi_device * dev)
  * the board, and also about the kernel module that contains
  * the device code.
  */
-static int attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int detach(struct comedi_device * dev);
+static int attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int detach(struct comedi_device *dev);
 static struct comedi_driver driver_cb_pcidas = {
-      driver_name:"cb_pcidas64",
-      module:THIS_MODULE,
-      attach:attach,
-      detach:detach,
+	.driver_name = "cb_pcidas64",
+	.module = THIS_MODULE,
+	.attach = attach,
+	.detach = detach,
 };
 
-static int ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int ai_config_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int ao_readback_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s);
-static int ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd);
-static int ao_cmd(struct comedi_device * dev, struct comedi_subdevice * s);
-static int ao_inttrig(struct comedi_device * dev, struct comedi_subdevice * subdev,
+static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int ai_config_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int ao_readback_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
+static int ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd);
+static int ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
+static int ao_inttrig(struct comedi_device *dev, struct comedi_subdevice *subdev,
 	unsigned int trig_num);
-static int ao_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd);
-static irqreturn_t handle_interrupt(int irq, void *d PT_REGS_ARG);
-static int ai_cancel(struct comedi_device * dev, struct comedi_subdevice * s);
-static int ao_cancel(struct comedi_device * dev, struct comedi_subdevice * s);
+static int ao_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd);
+static irqreturn_t handle_interrupt(int irq, void *d);
+static int ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
+static int ao_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
 static int dio_callback(int dir, int port, int data, unsigned long arg);
 static int dio_callback_4020(int dir, int port, int data, unsigned long arg);
-static int di_rbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int do_wbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int dio_60xx_config_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int dio_60xx_wbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int calib_read_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int calib_write_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int ad8402_read_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static void ad8402_write(struct comedi_device * dev, unsigned int channel,
+static int di_rbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int do_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int dio_60xx_config_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int dio_60xx_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int calib_read_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int calib_write_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int ad8402_read_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static void ad8402_write(struct comedi_device *dev, unsigned int channel,
 	unsigned int value);
-static int ad8402_write_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int eeprom_read_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static void check_adc_timing(struct comedi_device * dev, struct comedi_cmd * cmd);
+static int ad8402_write_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int eeprom_read_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static void check_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd);
 static unsigned int get_divisor(unsigned int ns, unsigned int flags);
-static void i2c_write(struct comedi_device * dev, unsigned int address,
-	const uint8_t * data, unsigned int length);
-static void caldac_write(struct comedi_device * dev, unsigned int channel,
+static void i2c_write(struct comedi_device *dev, unsigned int address,
+	const uint8_t *data, unsigned int length);
+static void caldac_write(struct comedi_device *dev, unsigned int channel,
 	unsigned int value);
-static int caldac_8800_write(struct comedi_device * dev, unsigned int address,
+static int caldac_8800_write(struct comedi_device *dev, unsigned int address,
 	uint8_t value);
-//static int dac_1590_write(struct comedi_device *dev, unsigned int dac_a, unsigned int dac_b);
-static int caldac_i2c_write(struct comedi_device * dev, unsigned int caldac_channel,
+/* static int dac_1590_write(struct comedi_device *dev, unsigned int dac_a, unsigned int dac_b); */
+static int caldac_i2c_write(struct comedi_device *dev, unsigned int caldac_channel,
 	unsigned int value);
-static void abort_dma(struct comedi_device * dev, unsigned int channel);
-static void disable_plx_interrupts(struct comedi_device * dev);
-static int set_ai_fifo_size(struct comedi_device * dev, unsigned int num_samples);
-static unsigned int ai_fifo_size(struct comedi_device * dev);
-static int set_ai_fifo_segment_length(struct comedi_device * dev,
+static void abort_dma(struct comedi_device *dev, unsigned int channel);
+static void disable_plx_interrupts(struct comedi_device *dev);
+static int set_ai_fifo_size(struct comedi_device *dev, unsigned int num_samples);
+static unsigned int ai_fifo_size(struct comedi_device *dev);
+static int set_ai_fifo_segment_length(struct comedi_device *dev,
 	unsigned int num_entries);
-static void disable_ai_pacing(struct comedi_device * dev);
-static void disable_ai_interrupts(struct comedi_device * dev);
-static void enable_ai_interrupts(struct comedi_device * dev, const struct comedi_cmd * cmd);
+static void disable_ai_pacing(struct comedi_device *dev);
+static void disable_ai_interrupts(struct comedi_device *dev);
+static void enable_ai_interrupts(struct comedi_device *dev, const struct comedi_cmd *cmd);
 static unsigned int get_ao_divisor(unsigned int ns, unsigned int flags);
-static void load_ao_dma(struct comedi_device * dev, const struct comedi_cmd * cmd);
+static void load_ao_dma(struct comedi_device *dev, const struct comedi_cmd *cmd);
 
 COMEDI_PCI_INITCLEANUP(driver_cb_pcidas, pcidas64_pci_table);
 
-static unsigned int ai_range_bits_6xxx(const struct comedi_device * dev,
+static unsigned int ai_range_bits_6xxx(const struct comedi_device *dev,
 	unsigned int range_index)
 {
 	const struct comedi_krange *range =
@@ -1246,7 +1241,7 @@ static unsigned int ai_range_bits_6xxx(const struct comedi_device * dev,
 	return bits;
 }
 
-static unsigned int hw_revision(const struct comedi_device * dev,
+static unsigned int hw_revision(const struct comedi_device *dev,
 	uint16_t hw_status_bits)
 {
 	if (board(dev)->layout == LAYOUT_4020)
@@ -1255,7 +1250,7 @@ static unsigned int hw_revision(const struct comedi_device * dev,
 	return (hw_status_bits >> 12) & 0xf;
 }
 
-static void set_dac_range_bits(struct comedi_device * dev, volatile uint16_t * bits,
+static void set_dac_range_bits(struct comedi_device *dev, volatile uint16_t *bits,
 	unsigned int channel, unsigned int range)
 {
 	unsigned int code = board(dev)->ao_range_code[range];
@@ -1269,13 +1264,13 @@ static void set_dac_range_bits(struct comedi_device * dev, volatile uint16_t * b
 	*bits |= code << (2 * channel);
 };
 
-static inline int ao_cmd_is_supported(const struct pcidas64_board * board)
+static inline int ao_cmd_is_supported(const struct pcidas64_board *board)
 {
 	return board->ao_nchan && board->layout != LAYOUT_4020;
 }
 
-// initialize plx9080 chip
-static void init_plx9080(struct comedi_device * dev)
+/* initialize plx9080 chip */
+static void init_plx9080(struct comedi_device *dev)
 {
 	uint32_t bits;
 	void *plx_iobase = priv(dev)->plx9080_iobase;
@@ -1283,7 +1278,7 @@ static void init_plx9080(struct comedi_device * dev)
 	priv(dev)->plx_control_bits =
 		readl(priv(dev)->plx9080_iobase + PLX_CONTROL_REG);
 
-	// plx9080 dump
+	/*  plx9080 dump */
 	DEBUG_PRINT(" plx interrupt status 0x%x\n",
 		readl(plx_iobase + PLX_INTRCS_REG));
 	DEBUG_PRINT(" plx id bits 0x%x\n", readl(plx_iobase + PLX_ID_REG));
@@ -1327,35 +1322,35 @@ static void init_plx9080(struct comedi_device * dev)
 	abort_dma(dev, 0);
 	abort_dma(dev, 1);
 
-	// configure dma0 mode
+	/*  configure dma0 mode */
 	bits = 0;
-	// enable ready input, not sure if this is necessary
+	/*  enable ready input, not sure if this is necessary */
 	bits |= PLX_DMA_EN_READYIN_BIT;
-	// enable bterm, not sure if this is necessary
+	/*  enable bterm, not sure if this is necessary */
 	bits |= PLX_EN_BTERM_BIT;
-	// enable dma chaining
+	/*  enable dma chaining */
 	bits |= PLX_EN_CHAIN_BIT;
-	// enable interrupt on dma done (probably don't need this, since chain never finishes)
+	/*  enable interrupt on dma done (probably don't need this, since chain never finishes) */
 	bits |= PLX_EN_DMA_DONE_INTR_BIT;
-	// don't increment local address during transfers (we are transferring from a fixed fifo register)
+	/*  don't increment local address during transfers (we are transferring from a fixed fifo register) */
 	bits |= PLX_LOCAL_ADDR_CONST_BIT;
-	// route dma interrupt to pci bus
+	/*  route dma interrupt to pci bus */
 	bits |= PLX_DMA_INTR_PCI_BIT;
-	// enable demand mode
+	/*  enable demand mode */
 	bits |= PLX_DEMAND_MODE_BIT;
-	// enable local burst mode
+	/*  enable local burst mode */
 	bits |= PLX_DMA_LOCAL_BURST_EN_BIT;
-	// 4020 uses 32 bit dma
+	/*  4020 uses 32 bit dma */
 	if (board(dev)->layout == LAYOUT_4020) {
 		bits |= PLX_LOCAL_BUS_32_WIDE_BITS;
-	} else {		// localspace0 bus is 16 bits wide
+	} else {		/*  localspace0 bus is 16 bits wide */
 		bits |= PLX_LOCAL_BUS_16_WIDE_BITS;
 	}
 	writel(bits, plx_iobase + PLX_DMA1_MODE_REG);
 	if (ao_cmd_is_supported(board(dev)))
 		writel(bits, plx_iobase + PLX_DMA0_MODE_REG);
 
-	// enable interrupts on plx 9080
+	/*  enable interrupts on plx 9080 */
 	priv(dev)->plx_intcsr_bits |=
 		ICS_AERR | ICS_PERR | ICS_PIE | ICS_PLIE | ICS_PAIE | ICS_LIE |
 		ICS_DMA0_E | ICS_DMA1_E;
@@ -1365,7 +1360,7 @@ static void init_plx9080(struct comedi_device * dev)
 
 /* Allocate and initialize the subdevice structures.
  */
-static int setup_subdevices(struct comedi_device * dev)
+static int setup_subdevices(struct comedi_device *dev)
 {
 	struct comedi_subdevice *s;
 	void *dio_8255_iobase;
@@ -1396,9 +1391,9 @@ static int setup_subdevices(struct comedi_device * dev)
 	if (board(dev)->layout == LAYOUT_4020) {
 		unsigned int i;
 		uint8_t data;
-		// set adc to read from inputs (not internal calibration sources)
+		/*  set adc to read from inputs (not internal calibration sources) */
 		priv(dev)->i2c_cal_range_bits = adc_src_4020_bits(4);
-		// set channels to +-5 volt input ranges
+		/*  set channels to +-5 volt input ranges */
 		for (i = 0; i < s->n_chan; i++)
 			priv(dev)->i2c_cal_range_bits |= attenuate_bit(i);
 		data = priv(dev)->i2c_cal_range_bits;
@@ -1428,7 +1423,7 @@ static int setup_subdevices(struct comedi_device * dev)
 		s->type = COMEDI_SUBD_UNUSED;
 	}
 
-	// digital input
+	/*  digital input */
 	s = dev->subdevices + 2;
 	if (board(dev)->layout == LAYOUT_64XX) {
 		s->type = COMEDI_SUBD_DI;
@@ -1440,7 +1435,7 @@ static int setup_subdevices(struct comedi_device * dev)
 	} else
 		s->type = COMEDI_SUBD_UNUSED;
 
-	// digital output
+	/*  digital output */
 	if (board(dev)->layout == LAYOUT_64XX) {
 		s = dev->subdevices + 3;
 		s->type = COMEDI_SUBD_DO;
@@ -1469,7 +1464,7 @@ static int setup_subdevices(struct comedi_device * dev)
 	} else
 		s->type = COMEDI_SUBD_UNUSED;
 
-	// 8 channel dio for 60xx
+	/*  8 channel dio for 60xx */
 	s = dev->subdevices + 5;
 	if (board(dev)->layout == LAYOUT_60XX) {
 		s->type = COMEDI_SUBD_DIO;
@@ -1482,7 +1477,7 @@ static int setup_subdevices(struct comedi_device * dev)
 	} else
 		s->type = COMEDI_SUBD_UNUSED;
 
-	// caldac
+	/*  caldac */
 	s = dev->subdevices + 6;
 	s->type = COMEDI_SUBD_CALIB;
 	s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL;
@@ -1496,7 +1491,7 @@ static int setup_subdevices(struct comedi_device * dev)
 	for (i = 0; i < s->n_chan; i++)
 		caldac_write(dev, i, s->maxdata / 2);
 
-	// 2 channel ad8402 potentiometer
+	/*  2 channel ad8402 potentiometer */
 	s = dev->subdevices + 7;
 	if (board(dev)->layout == LAYOUT_64XX) {
 		s->type = COMEDI_SUBD_CALIB;
@@ -1510,7 +1505,7 @@ static int setup_subdevices(struct comedi_device * dev)
 	} else
 		s->type = COMEDI_SUBD_UNUSED;
 
-	//serial EEPROM, if present
+	/* serial EEPROM, if present */
 	s = dev->subdevices + 8;
 	if (readl(priv(dev)->plx9080_iobase + PLX_CONTROL_REG) & CTL_EECHK) {
 		s->type = COMEDI_SUBD_MEMORY;
@@ -1521,34 +1516,34 @@ static int setup_subdevices(struct comedi_device * dev)
 	} else
 		s->type = COMEDI_SUBD_UNUSED;
 
-	// user counter subd XXX
+	/*  user counter subd XXX */
 	s = dev->subdevices + 9;
 	s->type = COMEDI_SUBD_UNUSED;
 
 	return 0;
 }
 
-static void disable_plx_interrupts(struct comedi_device * dev)
+static void disable_plx_interrupts(struct comedi_device *dev)
 {
 	priv(dev)->plx_intcsr_bits = 0;
 	writel(priv(dev)->plx_intcsr_bits,
 		priv(dev)->plx9080_iobase + PLX_INTRCS_REG);
 }
 
-static void init_stc_registers(struct comedi_device * dev)
+static void init_stc_registers(struct comedi_device *dev)
 {
 	uint16_t bits;
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	spin_lock_irqsave(&dev->spinlock, flags);
 
-	// bit should be set for 6025, although docs say boards with <= 16 chans should be cleared XXX
+	/*  bit should be set for 6025, although docs say boards with <= 16 chans should be cleared XXX */
 	if (1)
 		priv(dev)->adc_control1_bits |= ADC_QUEUE_CONFIG_BIT;
 	writew(priv(dev)->adc_control1_bits,
 		priv(dev)->main_iobase + ADC_CONTROL1_REG);
 
-	// 6402/16 manual says this register must be initialized to 0xff?
+	/*  6402/16 manual says this register must be initialized to 0xff? */
 	writew(0xff, priv(dev)->main_iobase + ADC_SAMPLE_INTERVAL_UPPER_REG);
 
 	bits = SLOW_DAC_BIT | DMA_CH_SELECT_BIT;
@@ -1561,9 +1556,9 @@ static void init_stc_registers(struct comedi_device * dev)
 	writew(0, priv(dev)->main_iobase + DAQ_SYNC_REG);
 	writew(0, priv(dev)->main_iobase + CALIBRATION_REG);
 
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
-	// set fifos to maximum size
+	/*  set fifos to maximum size */
 	priv(dev)->fifo_size_bits |= DAC_FIFO_BITS;
 	set_ai_fifo_segment_length(dev,
 		board(dev)->ai_fifo->max_segment_length);
@@ -1577,11 +1572,11 @@ static void init_stc_registers(struct comedi_device * dev)
 	disable_ai_pacing(dev);
 };
 
-int alloc_and_init_dma_members(struct comedi_device * dev)
+int alloc_and_init_dma_members(struct comedi_device *dev)
 {
 	int i;
 
-	// alocate pci dma buffers
+	/*  alocate pci dma buffers */
 	for (i = 0; i < ai_dma_ring_count(board(dev)); i++) {
 		priv(dev)->ai_buffer[i] =
 			pci_alloc_consistent(priv(dev)->hw_dev, DMA_BUFFER_SIZE,
@@ -1601,7 +1596,7 @@ int alloc_and_init_dma_members(struct comedi_device * dev)
 			}
 		}
 	}
-	// allocate dma descriptors
+	/*  allocate dma descriptors */
 	priv(dev)->ai_dma_desc =
 		pci_alloc_consistent(priv(dev)->hw_dev,
 		sizeof(struct plx_dma_desc) * ai_dma_ring_count(board(dev)),
@@ -1622,7 +1617,7 @@ int alloc_and_init_dma_members(struct comedi_device * dev)
 		DEBUG_PRINT("ao dma descriptors start at bus addr 0x%x\n",
 			priv(dev)->ao_dma_desc_bus_addr);
 	}
-	// initialize dma descriptors
+	/*  initialize dma descriptors */
 	for (i = 0; i < ai_dma_ring_count(board(dev)); i++) {
 		priv(dev)->ai_dma_desc[i].pci_start_addr =
 			cpu_to_le32(priv(dev)->ai_buffer_bus_addr[i]);
@@ -1663,7 +1658,7 @@ int alloc_and_init_dma_members(struct comedi_device * dev)
 	return 0;
 }
 
-static inline void warn_external_queue(struct comedi_device * dev)
+static inline void warn_external_queue(struct comedi_device *dev)
 {
 	comedi_error(dev,
 		"AO command and AI external channel queue cannot be used simultaneously.");
@@ -1697,16 +1692,16 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	for (pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
 		pcidev != NULL;
 		pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pcidev)) {
-		// is it not a computer boards card?
+		/*  is it not a computer boards card? */
 		if (pcidev->vendor != PCI_VENDOR_ID_COMPUTERBOARDS)
 			continue;
-		// loop through cards supported by this driver
-		for (index = 0; index < num_boards(); index++) {
+		/*  loop through cards supported by this driver */
+		for (index = 0; index < ARRAY_SIZE(pcidas64_boards); index++) {
 			if (pcidas64_boards[index].device_id != pcidev->device)
 				continue;
-			// was a particular bus/slot requested?
+			/*  was a particular bus/slot requested? */
 			if (it->options[0] || it->options[1]) {
-				// are we on the wrong bus/slot?
+				/*  are we on the wrong bus/slot? */
 				if (pcidev->bus->number != it->options[0] ||
 					PCI_SLOT(pcidev->devfn) !=
 					it->options[1]) {
@@ -1736,7 +1731,7 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	}
 	pci_set_master(pcidev);
 
-	//Initialize dev->board_name
+	/* Initialize dev->board_name */
 	dev->board_name = board(dev)->name;
 
 	priv(dev)->plx9080_phys_iobase =
@@ -1746,7 +1741,7 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	priv(dev)->dio_counter_phys_iobase =
 		pci_resource_start(pcidev, DIO_COUNTER_BADDRINDEX);
 
-	// remap, won't work with 2.0 kernels but who cares
+	/*  remap, won't work with 2.0 kernels but who cares */
 	priv(dev)->plx9080_iobase = ioremap(priv(dev)->plx9080_phys_iobase,
 		pci_resource_len(pcidev, PLX9080_BADDRINDEX));
 	priv(dev)->main_iobase = ioremap(priv(dev)->main_phys_iobase,
@@ -1766,7 +1761,7 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	DEBUG_PRINT(" diocounter remapped to 0x%p\n",
 		priv(dev)->dio_counter_iobase);
 
-	// figure out what local addresses are
+	/*  figure out what local addresses are */
 	local_range =
 		readl(priv(dev)->plx9080_iobase +
 		PLX_LAS0RNG_REG) & LRNG_MEM_MASK;
@@ -1798,8 +1793,8 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	printk(" stc hardware revision %i\n", priv(dev)->hw_revision);
 	init_plx9080(dev);
 	init_stc_registers(dev);
-	// get irq
-	if (comedi_request_irq(pcidev->irq, handle_interrupt, IRQF_SHARED,
+	/*  get irq */
+	if (request_irq(pcidev->irq, handle_interrupt, IRQF_SHARED,
 			"cb_pcidas64", dev)) {
 		printk(" unable to allocate irq %u\n", pcidev->irq);
 		return -EINVAL;
@@ -1823,14 +1818,14 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it)
  * allocated by _attach().  dev->private and dev->subdevices are
  * deallocated automatically by the core.
  */
-static int detach(struct comedi_device * dev)
+static int detach(struct comedi_device *dev)
 {
 	unsigned int i;
 
 	printk("comedi%d: cb_pcidas: remove\n", dev->minor);
 
 	if (dev->irq)
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 	if (priv(dev)) {
 		if (priv(dev)->hw_dev) {
 			if (priv(dev)->plx9080_iobase) {
@@ -1841,7 +1836,7 @@ static int detach(struct comedi_device * dev)
 				iounmap((void *)priv(dev)->main_iobase);
 			if (priv(dev)->dio_counter_iobase)
 				iounmap((void *)priv(dev)->dio_counter_iobase);
-			// free pci dma buffers
+			/*  free pci dma buffers */
 			for (i = 0; i < ai_dma_ring_count(board(dev)); i++) {
 				if (priv(dev)->ai_buffer[i])
 					pci_free_consistent(priv(dev)->hw_dev,
@@ -1858,7 +1853,7 @@ static int detach(struct comedi_device * dev)
 						priv(dev)->
 						ao_buffer_bus_addr[i]);
 			}
-			// free dma descriptors
+			/*  free dma descriptors */
 			if (priv(dev)->ai_dma_desc)
 				pci_free_consistent(priv(dev)->hw_dev,
 					sizeof(struct plx_dma_desc) *
@@ -1883,8 +1878,8 @@ static int detach(struct comedi_device * dev)
 	return 0;
 }
 
-static int ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int bits = 0, n, i;
 	unsigned int channel, range, aref;
@@ -1896,26 +1891,26 @@ static int ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
 	range = CR_RANGE(insn->chanspec);
 	aref = CR_AREF(insn->chanspec);
 
-	// disable card's analog input interrupt sources and pacing
-	// 4020 generates dac done interrupts even though they are disabled
+	/*  disable card's analog input interrupt sources and pacing */
+	/*  4020 generates dac done interrupts even though they are disabled */
 	disable_ai_pacing(dev);
 
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	spin_lock_irqsave(&dev->spinlock, flags);
 	if (insn->chanspec & CR_ALT_FILTER)
 		priv(dev)->adc_control1_bits |= ADC_DITHER_BIT;
 	else
 		priv(dev)->adc_control1_bits &= ~ADC_DITHER_BIT;
 	writew(priv(dev)->adc_control1_bits,
 		priv(dev)->main_iobase + ADC_CONTROL1_REG);
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
 	if (board(dev)->layout != LAYOUT_4020) {
-		// use internal queue
+		/*  use internal queue */
 		priv(dev)->hw_config_bits &= ~EXT_QUEUE_BIT;
 		writew(priv(dev)->hw_config_bits,
 			priv(dev)->main_iobase + HW_CONFIG_REG);
 
-		// ALT_SOURCE is internal calibration reference
+		/*  ALT_SOURCE is internal calibration reference */
 		if (insn->chanspec & CR_ALT_SOURCE) {
 			unsigned int cal_en_bit;
 
@@ -1924,27 +1919,27 @@ static int ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
 				cal_en_bit = CAL_EN_60XX_BIT;
 			else
 				cal_en_bit = CAL_EN_64XX_BIT;
-			// select internal reference source to connect to channel 0
+			/*  select internal reference source to connect to channel 0 */
 			writew(cal_en_bit | adc_src_bits(priv(dev)->
 					calibration_source),
 				priv(dev)->main_iobase + CALIBRATION_REG);
 		} else {
-			// make sure internal calibration source is turned off
+			/*  make sure internal calibration source is turned off */
 			writew(0, priv(dev)->main_iobase + CALIBRATION_REG);
 		}
-		// load internal queue
+		/*  load internal queue */
 		bits = 0;
-		// set gain
+		/*  set gain */
 		bits |= ai_range_bits_6xxx(dev, CR_RANGE(insn->chanspec));
-		// set single-ended / differential
+		/*  set single-ended / differential */
 		bits |= se_diff_bit_6xxx(dev, aref == AREF_DIFF);
 		if (aref == AREF_COMMON)
 			bits |= ADC_COMMON_BIT;
 		bits |= adc_chan_bits(channel);
-		// set stop channel
+		/*  set stop channel */
 		writew(adc_chan_bits(channel),
 			priv(dev)->main_iobase + ADC_QUEUE_HIGH_REG);
-		// set start channel, and rest of settings
+		/*  set start channel, and rest of settings */
 		writew(bits, priv(dev)->main_iobase + ADC_QUEUE_LOAD_REG);
 	} else {
 		uint8_t old_cal_range_bits = priv(dev)->i2c_cal_range_bits;
@@ -1955,16 +1950,16 @@ static int ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
 			priv(dev)->i2c_cal_range_bits |=
 				adc_src_4020_bits(priv(dev)->
 				calibration_source);
-		} else {	//select BNC inputs
+		} else {	/* select BNC inputs */
 			priv(dev)->i2c_cal_range_bits |= adc_src_4020_bits(4);
 		}
-		// select range
+		/*  select range */
 		if (range == 0)
 			priv(dev)->i2c_cal_range_bits |= attenuate_bit(channel);
 		else
 			priv(dev)->i2c_cal_range_bits &=
 				~attenuate_bit(channel);
-		// update calibration/range i2c register only if necessary, as it is very slow
+		/*  update calibration/range i2c register only if necessary, as it is very slow */
 		if (old_cal_range_bits != priv(dev)->i2c_cal_range_bits) {
 			uint8_t i2c_data = priv(dev)->i2c_cal_range_bits;
 			i2c_write(dev, RANGE_CAL_I2C_ADDR, &i2c_data,
@@ -1981,14 +1976,14 @@ static int ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
 
 	for (n = 0; n < insn->n; n++) {
 
-		// clear adc buffer (inside loop for 4020 sake)
+		/*  clear adc buffer (inside loop for 4020 sake) */
 		writew(0, priv(dev)->main_iobase + ADC_BUFFER_CLEAR_REG);
 
 		/* trigger conversion, bits sent only matter for 4020 */
 		writew(adc_convert_chan_4020_bits(CR_CHAN(insn->chanspec)),
 			priv(dev)->main_iobase + ADC_CONVERT_REG);
 
-		// wait for data
+		/*  wait for data */
 		for (i = 0; i < timeout; i++) {
 			bits = readw(priv(dev)->main_iobase + HW_STATUS_REG);
 			DEBUG_PRINT(" pipe bits 0x%x\n", pipe_full_bits(bits));
@@ -2000,12 +1995,12 @@ static int ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
 				if (pipe_full_bits(bits))
 					break;
 			}
-			comedi_udelay(1);
+			udelay(1);
 		}
 		DEBUG_PRINT(" looped %i times waiting for data\n", i);
 		if (i == timeout) {
 			comedi_error(dev, " analog input read insn timed out");
-			rt_printk(" status 0x%x\n", bits);
+			printk(" status 0x%x\n", bits);
 			return -ETIME;
 		}
 		if (board(dev)->layout == LAYOUT_4020)
@@ -2020,7 +2015,7 @@ static int ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
 	return n;
 }
 
-static int ai_config_calibration_source(struct comedi_device * dev, unsigned int * data)
+static int ai_config_calibration_source(struct comedi_device *dev, unsigned int *data)
 {
 	unsigned int source = data[1];
 	int num_calibration_sources;
@@ -2040,7 +2035,7 @@ static int ai_config_calibration_source(struct comedi_device * dev, unsigned int
 	return 2;
 }
 
-static int ai_config_block_size(struct comedi_device * dev, unsigned int * data)
+static int ai_config_block_size(struct comedi_device *dev, unsigned int *data)
 {
 	int fifo_size;
 	const struct hw_fifo_info *const fifo = board(dev)->ai_fifo;
@@ -2067,7 +2062,7 @@ static int ai_config_block_size(struct comedi_device * dev, unsigned int * data)
 	return 2;
 }
 
-static int ai_config_master_clock_4020(struct comedi_device * dev, unsigned int * data)
+static int ai_config_master_clock_4020(struct comedi_device *dev, unsigned int *data)
 {
 	unsigned int divisor = data[4];
 	int retval = 0;
@@ -2092,8 +2087,8 @@ static int ai_config_master_clock_4020(struct comedi_device * dev, unsigned int
 	return retval ? retval : 5;
 }
 
-// XXX could add support for 60xx series
-static int ai_config_master_clock(struct comedi_device * dev, unsigned int * data)
+/* XXX could add support for 60xx series */
+static int ai_config_master_clock(struct comedi_device *dev, unsigned int *data)
 {
 
 	switch (board(dev)->layout) {
@@ -2108,8 +2103,8 @@ static int ai_config_master_clock(struct comedi_device * dev, unsigned int * dat
 	return -EINVAL;
 }
 
-static int ai_config_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ai_config_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int id = data[0];
 
@@ -2130,8 +2125,8 @@ static int ai_config_insn(struct comedi_device * dev, struct comedi_subdevice *
 	return -EINVAL;
 }
 
-static int ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	int tmp;
@@ -2182,7 +2177,7 @@ static int ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
 
 	/* step 2: make sure trigger sources are unique and mutually compatible */
 
-	// uniqueness check
+	/*  uniqueness check */
 	if (cmd->start_src != TRIG_NOW && cmd->start_src != TRIG_EXT)
 		err++;
 	if (cmd->scan_begin_src != TRIG_TIMER &&
@@ -2196,7 +2191,7 @@ static int ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
 		cmd->stop_src != TRIG_NONE && cmd->stop_src != TRIG_EXT)
 		err++;
 
-	// compatibility check
+	/*  compatibility check */
 	if (cmd->convert_src == TRIG_EXT && cmd->scan_begin_src == TRIG_TIMER)
 		err++;
 	if (cmd->stop_src != TRIG_COUNT &&
@@ -2220,7 +2215,7 @@ static int ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
 				err++;
 			}
 			if (cmd->scan_begin_src == TRIG_TIMER) {
-				// if scans are timed faster than conversion rate allows
+				/*  if scans are timed faster than conversion rate allows */
 				if (cmd->convert_arg * cmd->chanlist_len >
 					cmd->scan_begin_arg) {
 					cmd->scan_begin_arg =
@@ -2278,7 +2273,7 @@ static int ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
 	if (err)
 		return 4;
 
-	// make sure user is doesn't change analog reference mid chanlist
+	/*  make sure user is doesn't change analog reference mid chanlist */
 	if (cmd->chanlist) {
 		aref = CR_AREF(cmd->chanlist[0]);
 		for (i = 1; i < cmd->chanlist_len; i++) {
@@ -2289,7 +2284,7 @@ static int ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
 				break;
 			}
 		}
-		// check 4020 chanlist
+		/*  check 4020 chanlist */
 		if (board(dev)->layout == LAYOUT_4020) {
 			unsigned int first_channel = CR_CHAN(cmd->chanlist[0]);
 			for (i = 1; i < cmd->chanlist_len; i++) {
@@ -2315,9 +2310,9 @@ static int ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
 	return 0;
 }
 
-static int use_hw_sample_counter(struct comedi_cmd * cmd)
+static int use_hw_sample_counter(struct comedi_cmd *cmd)
 {
-// disable for now until I work out a race
+/* disable for now until I work out a race */
 	return 0;
 
 	if (cmd->stop_src == TRIG_COUNT && cmd->stop_arg <= max_counter_value)
@@ -2326,13 +2321,13 @@ static int use_hw_sample_counter(struct comedi_cmd * cmd)
 		return 0;
 }
 
-static void setup_sample_counters(struct comedi_device * dev, struct comedi_cmd * cmd)
+static void setup_sample_counters(struct comedi_device *dev, struct comedi_cmd *cmd)
 {
 	if (cmd->stop_src == TRIG_COUNT) {
-		// set software count
+		/*  set software count */
 		priv(dev)->ai_count = cmd->stop_arg * cmd->chanlist_len;
 	}
-	// load hardware conversion counter
+	/*  load hardware conversion counter */
 	if (use_hw_sample_counter(cmd)) {
 		writew(cmd->stop_arg & 0xffff,
 			priv(dev)->main_iobase + ADC_COUNT_LOWER_REG);
@@ -2343,7 +2338,7 @@ static void setup_sample_counters(struct comedi_device * dev, struct comedi_cmd
 	}
 }
 
-static inline unsigned int dma_transfer_size(struct comedi_device * dev)
+static inline unsigned int dma_transfer_size(struct comedi_device *dev)
 {
 	unsigned int num_samples;
 
@@ -2356,71 +2351,71 @@ static inline unsigned int dma_transfer_size(struct comedi_device * dev)
 	return num_samples;
 }
 
-static void disable_ai_pacing(struct comedi_device * dev)
+static void disable_ai_pacing(struct comedi_device *dev)
 {
 	unsigned long flags;
 
 	disable_ai_interrupts(dev);
 
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	spin_lock_irqsave(&dev->spinlock, flags);
 	priv(dev)->adc_control1_bits &= ~ADC_SW_GATE_BIT;
 	writew(priv(dev)->adc_control1_bits,
 		priv(dev)->main_iobase + ADC_CONTROL1_REG);
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
 	/* disable pacing, triggering, etc */
 	writew(ADC_DMA_DISABLE_BIT | ADC_SOFT_GATE_BITS | ADC_GATE_LEVEL_BIT,
 		priv(dev)->main_iobase + ADC_CONTROL0_REG);
 }
 
-static void disable_ai_interrupts(struct comedi_device * dev)
+static void disable_ai_interrupts(struct comedi_device *dev)
 {
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	spin_lock_irqsave(&dev->spinlock, flags);
 	priv(dev)->intr_enable_bits &=
 		~EN_ADC_INTR_SRC_BIT & ~EN_ADC_DONE_INTR_BIT &
 		~EN_ADC_ACTIVE_INTR_BIT & ~EN_ADC_STOP_INTR_BIT &
 		~EN_ADC_OVERRUN_BIT & ~ADC_INTR_SRC_MASK;
 	writew(priv(dev)->intr_enable_bits,
 		priv(dev)->main_iobase + INTR_ENABLE_REG);
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
 	DEBUG_PRINT("intr enable bits 0x%x\n", priv(dev)->intr_enable_bits);
 }
 
-static void enable_ai_interrupts(struct comedi_device * dev, const struct comedi_cmd * cmd)
+static void enable_ai_interrupts(struct comedi_device *dev, const struct comedi_cmd *cmd)
 {
 	uint32_t bits;
 	unsigned long flags;
 
 	bits = EN_ADC_OVERRUN_BIT | EN_ADC_DONE_INTR_BIT |
 		EN_ADC_ACTIVE_INTR_BIT | EN_ADC_STOP_INTR_BIT;
-	// Use pio transfer and interrupt on end of conversion if TRIG_WAKE_EOS flag is set.
+	/*  Use pio transfer and interrupt on end of conversion if TRIG_WAKE_EOS flag is set. */
 	if (cmd->flags & TRIG_WAKE_EOS) {
-		// 4020 doesn't support pio transfers except for fifo dregs
+		/*  4020 doesn't support pio transfers except for fifo dregs */
 		if (board(dev)->layout != LAYOUT_4020)
 			bits |= ADC_INTR_EOSCAN_BITS | EN_ADC_INTR_SRC_BIT;
 	}
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	spin_lock_irqsave(&dev->spinlock, flags);
 	priv(dev)->intr_enable_bits |= bits;
 	writew(priv(dev)->intr_enable_bits,
 		priv(dev)->main_iobase + INTR_ENABLE_REG);
 	DEBUG_PRINT("intr enable bits 0x%x\n", priv(dev)->intr_enable_bits);
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 }
 
-static uint32_t ai_convert_counter_6xxx(const struct comedi_device * dev,
-	const struct comedi_cmd * cmd)
+static uint32_t ai_convert_counter_6xxx(const struct comedi_device *dev,
+	const struct comedi_cmd *cmd)
 {
-	// supposed to load counter with desired divisor minus 3
+	/*  supposed to load counter with desired divisor minus 3 */
 	return cmd->convert_arg / TIMER_BASE - 3;
 }
 
-static uint32_t ai_scan_counter_6xxx(struct comedi_device * dev, struct comedi_cmd * cmd)
+static uint32_t ai_scan_counter_6xxx(struct comedi_device *dev, struct comedi_cmd *cmd)
 {
 	uint32_t count;
-	// figure out how long we need to delay at end of scan
+	/*  figure out how long we need to delay at end of scan */
 	switch (cmd->scan_begin_src) {
 	case TRIG_TIMER:
 		count = (cmd->scan_begin_arg -
@@ -2437,7 +2432,7 @@ static uint32_t ai_scan_counter_6xxx(struct comedi_device * dev, struct comedi_c
 	return count - 3;
 }
 
-static uint32_t ai_convert_counter_4020(struct comedi_device * dev, struct comedi_cmd * cmd)
+static uint32_t ai_convert_counter_4020(struct comedi_device *dev, struct comedi_cmd *cmd)
 {
 	unsigned int divisor;
 
@@ -2448,20 +2443,20 @@ static uint32_t ai_convert_counter_4020(struct comedi_device * dev, struct comed
 	case TRIG_OTHER:
 		divisor = priv(dev)->ext_clock.divisor;
 		break;
-	default:		// should never happen
+	default:		/*  should never happen */
 		comedi_error(dev, "bug! failed to set ai pacing!");
 		divisor = 1000;
 		break;
 	}
 
-	// supposed to load counter with desired divisor minus 2 for 4020
+	/*  supposed to load counter with desired divisor minus 2 for 4020 */
 	return divisor - 2;
 }
 
-static void select_master_clock_4020(struct comedi_device * dev,
-	const struct comedi_cmd * cmd)
+static void select_master_clock_4020(struct comedi_device *dev,
+	const struct comedi_cmd *cmd)
 {
-	// select internal/external master clock
+	/*  select internal/external master clock */
 	priv(dev)->hw_config_bits &= ~MASTER_CLOCK_4020_MASK;
 	if (cmd->scan_begin_src == TRIG_OTHER) {
 		int chanspec = priv(dev)->ext_clock.chanspec;
@@ -2477,7 +2472,7 @@ static void select_master_clock_4020(struct comedi_device * dev,
 		priv(dev)->main_iobase + HW_CONFIG_REG);
 }
 
-static void select_master_clock(struct comedi_device * dev, const struct comedi_cmd * cmd)
+static void select_master_clock(struct comedi_device *dev, const struct comedi_cmd *cmd)
 {
 	switch (board(dev)->layout) {
 	case LAYOUT_4020:
@@ -2488,12 +2483,12 @@ static void select_master_clock(struct comedi_device * dev, const struct comedi_
 	}
 }
 
-static inline void dma_start_sync(struct comedi_device * dev, unsigned int channel)
+static inline void dma_start_sync(struct comedi_device *dev, unsigned int channel)
 {
 	unsigned long flags;
 
-	// spinlock for plx dma control/status reg
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	/*  spinlock for plx dma control/status reg */
+	spin_lock_irqsave(&dev->spinlock, flags);
 	if (channel)
 		writeb(PLX_DMA_EN_BIT | PLX_DMA_START_BIT |
 			PLX_CLEAR_DMA_INTR_BIT,
@@ -2502,10 +2497,10 @@ static inline void dma_start_sync(struct comedi_device * dev, unsigned int chann
 		writeb(PLX_DMA_EN_BIT | PLX_DMA_START_BIT |
 			PLX_CLEAR_DMA_INTR_BIT,
 			priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG);
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 }
 
-static void set_ai_pacing(struct comedi_device * dev, struct comedi_cmd * cmd)
+static void set_ai_pacing(struct comedi_device *dev, struct comedi_cmd *cmd)
 {
 	uint32_t convert_counter = 0, scan_counter = 0;
 
@@ -2520,23 +2515,23 @@ static void set_ai_pacing(struct comedi_device * dev, struct comedi_cmd * cmd)
 		scan_counter = ai_scan_counter_6xxx(dev, cmd);
 	}
 
-	// load lower 16 bits of convert interval
+	/*  load lower 16 bits of convert interval */
 	writew(convert_counter & 0xffff,
 		priv(dev)->main_iobase + ADC_SAMPLE_INTERVAL_LOWER_REG);
 	DEBUG_PRINT("convert counter 0x%x\n", convert_counter);
-	// load upper 8 bits of convert interval
+	/*  load upper 8 bits of convert interval */
 	writew((convert_counter >> 16) & 0xff,
 		priv(dev)->main_iobase + ADC_SAMPLE_INTERVAL_UPPER_REG);
-	// load lower 16 bits of scan delay
+	/*  load lower 16 bits of scan delay */
 	writew(scan_counter & 0xffff,
 		priv(dev)->main_iobase + ADC_DELAY_INTERVAL_LOWER_REG);
-	// load upper 8 bits of scan delay
+	/*  load upper 8 bits of scan delay */
 	writew((scan_counter >> 16) & 0xff,
 		priv(dev)->main_iobase + ADC_DELAY_INTERVAL_UPPER_REG);
 	DEBUG_PRINT("scan counter 0x%x\n", scan_counter);
 }
 
-static int use_internal_queue_6xxx(const struct comedi_cmd * cmd)
+static int use_internal_queue_6xxx(const struct comedi_cmd *cmd)
 {
 	int i;
 	for (i = 0; i + 1 < cmd->chanlist_len; i++) {
@@ -2552,7 +2547,7 @@ static int use_internal_queue_6xxx(const struct comedi_cmd * cmd)
 	return 1;
 }
 
-static int setup_channel_queue(struct comedi_device * dev, const struct comedi_cmd * cmd)
+static int setup_channel_queue(struct comedi_device *dev, const struct comedi_cmd *cmd)
 {
 	unsigned short bits;
 	int i;
@@ -2563,25 +2558,25 @@ static int setup_channel_queue(struct comedi_device * dev, const struct comedi_c
 			writew(priv(dev)->hw_config_bits,
 				priv(dev)->main_iobase + HW_CONFIG_REG);
 			bits = 0;
-			// set channel
+			/*  set channel */
 			bits |= adc_chan_bits(CR_CHAN(cmd->chanlist[0]));
-			// set gain
+			/*  set gain */
 			bits |= ai_range_bits_6xxx(dev,
 				CR_RANGE(cmd->chanlist[0]));
-			// set single-ended / differential
+			/*  set single-ended / differential */
 			bits |= se_diff_bit_6xxx(dev,
 				CR_AREF(cmd->chanlist[0]) == AREF_DIFF);
 			if (CR_AREF(cmd->chanlist[0]) == AREF_COMMON)
 				bits |= ADC_COMMON_BIT;
-			// set stop channel
+			/*  set stop channel */
 			writew(adc_chan_bits(CR_CHAN(cmd->chanlist[cmd->
 							chanlist_len - 1])),
 				priv(dev)->main_iobase + ADC_QUEUE_HIGH_REG);
-			// set start channel, and rest of settings
+			/*  set start channel, and rest of settings */
 			writew(bits,
 				priv(dev)->main_iobase + ADC_QUEUE_LOAD_REG);
 		} else {
-			// use external queue
+			/*  use external queue */
 			if (dev->write_subdev && dev->write_subdev->busy) {
 				warn_external_queue(dev);
 				return -EBUSY;
@@ -2589,26 +2584,26 @@ static int setup_channel_queue(struct comedi_device * dev, const struct comedi_c
 			priv(dev)->hw_config_bits |= EXT_QUEUE_BIT;
 			writew(priv(dev)->hw_config_bits,
 				priv(dev)->main_iobase + HW_CONFIG_REG);
-			// clear DAC buffer to prevent weird interactions
+			/*  clear DAC buffer to prevent weird interactions */
 			writew(0,
 				priv(dev)->main_iobase + DAC_BUFFER_CLEAR_REG);
-			// clear queue pointer
+			/*  clear queue pointer */
 			writew(0, priv(dev)->main_iobase + ADC_QUEUE_CLEAR_REG);
-			// load external queue
+			/*  load external queue */
 			for (i = 0; i < cmd->chanlist_len; i++) {
 				bits = 0;
-				// set channel
+				/*  set channel */
 				bits |= adc_chan_bits(CR_CHAN(cmd->
 						chanlist[i]));
-				// set gain
+				/*  set gain */
 				bits |= ai_range_bits_6xxx(dev,
 					CR_RANGE(cmd->chanlist[i]));
-				// set single-ended / differential
+				/*  set single-ended / differential */
 				bits |= se_diff_bit_6xxx(dev,
 					CR_AREF(cmd->chanlist[i]) == AREF_DIFF);
 				if (CR_AREF(cmd->chanlist[i]) == AREF_COMMON)
 					bits |= ADC_COMMON_BIT;
-				// mark end of queue
+				/*  mark end of queue */
 				if (i == cmd->chanlist_len - 1)
 					bits |= QUEUE_EOSCAN_BIT |
 						QUEUE_EOSEQ_BIT;
@@ -2622,7 +2617,7 @@ static int setup_channel_queue(struct comedi_device * dev, const struct comedi_c
 			/* doing a queue clear is not specified in board docs,
 			 * but required for reliable operation */
 			writew(0, priv(dev)->main_iobase + ADC_QUEUE_CLEAR_REG);
-			// prime queue holding register
+			/*  prime queue holding register */
 			writew(0, priv(dev)->main_iobase + ADC_QUEUE_LOAD_REG);
 		}
 	} else {
@@ -2630,9 +2625,9 @@ static int setup_channel_queue(struct comedi_device * dev, const struct comedi_c
 			priv(dev)->i2c_cal_range_bits;
 
 		priv(dev)->i2c_cal_range_bits &= ~ADC_SRC_4020_MASK;
-		//select BNC inputs
+		/* select BNC inputs */
 		priv(dev)->i2c_cal_range_bits |= adc_src_4020_bits(4);
-		// select ranges
+		/*  select ranges */
 		for (i = 0; i < cmd->chanlist_len; i++) {
 			unsigned int channel = CR_CHAN(cmd->chanlist[i]);
 			unsigned int range = CR_RANGE(cmd->chanlist[i]);
@@ -2644,7 +2639,7 @@ static int setup_channel_queue(struct comedi_device * dev, const struct comedi_c
 				priv(dev)->i2c_cal_range_bits &=
 					~attenuate_bit(channel);
 		}
-		// update calibration/range i2c register only if necessary, as it is very slow
+		/*  update calibration/range i2c register only if necessary, as it is very slow */
 		if (old_cal_range_bits != priv(dev)->i2c_cal_range_bits) {
 			uint8_t i2c_data = priv(dev)->i2c_cal_range_bits;
 			i2c_write(dev, RANGE_CAL_I2C_ADDR, &i2c_data,
@@ -2654,7 +2649,7 @@ static int setup_channel_queue(struct comedi_device * dev, const struct comedi_c
 	return 0;
 }
 
-static inline void load_first_dma_descriptor(struct comedi_device * dev,
+static inline void load_first_dma_descriptor(struct comedi_device *dev,
 	unsigned int dma_channel, unsigned int descriptor_bits)
 {
 	/* The transfer size, pci address, and local address registers
@@ -2681,7 +2676,7 @@ static inline void load_first_dma_descriptor(struct comedi_device * dev,
 	}
 }
 
-static int ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct comedi_async *async = s->async;
 	struct comedi_cmd *cmd = &async->cmd;
@@ -2697,7 +2692,7 @@ static int ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 	if (retval < 0)
 		return retval;
 
-	// make sure internal calibration source is turned off
+	/*  make sure internal calibration source is turned off */
 	writew(0, priv(dev)->main_iobase + CALIBRATION_REG);
 
 	set_ai_pacing(dev, cmd);
@@ -2706,16 +2701,16 @@ static int ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 
 	enable_ai_interrupts(dev, cmd);
 
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	spin_lock_irqsave(&dev->spinlock, flags);
 	/* set mode, allow conversions through software gate */
 	priv(dev)->adc_control1_bits |= ADC_SW_GATE_BIT;
 	priv(dev)->adc_control1_bits &= ~ADC_DITHER_BIT;
 	if (board(dev)->layout != LAYOUT_4020) {
 		priv(dev)->adc_control1_bits &= ~ADC_MODE_MASK;
 		if (cmd->convert_src == TRIG_EXT)
-			priv(dev)->adc_control1_bits |= adc_mode_bits(13);	// good old mode 13
+			priv(dev)->adc_control1_bits |= adc_mode_bits(13);	/*  good old mode 13 */
 		else
-			priv(dev)->adc_control1_bits |= adc_mode_bits(8);	// mode 8.  What else could you need?
+			priv(dev)->adc_control1_bits |= adc_mode_bits(8);	/*  mode 8.  What else could you need? */
 	} else {
 		priv(dev)->adc_control1_bits &= ~CHANNEL_MODE_4020_MASK;
 		if (cmd->chanlist_len == 4)
@@ -2733,22 +2728,22 @@ static int ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 	writew(priv(dev)->adc_control1_bits,
 		priv(dev)->main_iobase + ADC_CONTROL1_REG);
 	DEBUG_PRINT("control1 bits 0x%x\n", priv(dev)->adc_control1_bits);
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
-	// clear adc buffer
+	/*  clear adc buffer */
 	writew(0, priv(dev)->main_iobase + ADC_BUFFER_CLEAR_REG);
 
 	if ((cmd->flags & TRIG_WAKE_EOS) == 0 ||
 		board(dev)->layout == LAYOUT_4020) {
 		priv(dev)->ai_dma_index = 0;
 
-		// set dma transfer size
+		/*  set dma transfer size */
 		for (i = 0; i < ai_dma_ring_count(board(dev)); i++)
 			priv(dev)->ai_dma_desc[i].transfer_size =
 				cpu_to_le32(dma_transfer_size(dev) *
 				sizeof(uint16_t));
 
-		// give location of first dma descriptor
+		/*  give location of first dma descriptor */
 		load_first_dma_descriptor(dev, 1,
 			priv(dev)->
 			ai_dma_desc_bus_addr | PLX_DESC_IN_PCI_BIT |
@@ -2767,13 +2762,13 @@ static int ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 		writew(bits, priv(dev)->main_iobase + DAQ_ATRIG_LOW_4020_REG);
 	}
 
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	spin_lock_irqsave(&dev->spinlock, flags);
 
 	/* enable pacing, triggering, etc */
 	bits = ADC_ENABLE_BIT | ADC_SOFT_GATE_BITS | ADC_GATE_LEVEL_BIT;
 	if (cmd->flags & TRIG_WAKE_EOS)
 		bits |= ADC_DMA_DISABLE_BIT;
-	// set start trigger
+	/*  set start trigger */
 	if (cmd->start_src == TRIG_EXT) {
 		bits |= ADC_START_TRIG_EXT_BITS;
 		if (cmd->start_arg & CR_INVERT)
@@ -2787,9 +2782,9 @@ static int ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 
 	priv(dev)->ai_cmd_running = 1;
 
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
-	// start aquisition
+	/*  start aquisition */
 	if (cmd->start_src == TRIG_NOW) {
 		writew(0, priv(dev)->main_iobase + ADC_START_REG);
 		DEBUG_PRINT("soft trig\n");
@@ -2798,8 +2793,8 @@ static int ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 	return 0;
 }
 
-// read num_samples from 16 bit wide ai fifo
-static void pio_drain_ai_fifo_16(struct comedi_device * dev)
+/* read num_samples from 16 bit wide ai fifo */
+static void pio_drain_ai_fifo_16(struct comedi_device *dev)
 {
 	struct comedi_subdevice *s = dev->read_subdev;
 	struct comedi_async *async = s->async;
@@ -2810,7 +2805,7 @@ static void pio_drain_ai_fifo_16(struct comedi_device * dev)
 	int num_samples;
 
 	do {
-		// get least significant 15 bits
+		/*  get least significant 15 bits */
 		read_index =
 			readw(priv(dev)->main_iobase +
 			ADC_READ_PNTR_REG) & 0x7fff;
@@ -2847,7 +2842,7 @@ static void pio_drain_ai_fifo_16(struct comedi_device * dev)
 		}
 
 		if (num_samples < 0) {
-			rt_printk(" cb_pcidas64: bug! num_samples < 0\n");
+			printk(" cb_pcidas64: bug! num_samples < 0\n");
 			break;
 		}
 
@@ -2866,7 +2861,7 @@ static void pio_drain_ai_fifo_16(struct comedi_device * dev)
  * dma transfers (it only supports the use of pio for draining the last remaining
  * points from the fifo when a data aquisition operation has completed).
  */
-static void pio_drain_ai_fifo_32(struct comedi_device * dev)
+static void pio_drain_ai_fifo_32(struct comedi_device *dev)
 {
 	struct comedi_subdevice *s = dev->read_subdev;
 	struct comedi_async *async = s->async;
@@ -2899,8 +2894,8 @@ static void pio_drain_ai_fifo_32(struct comedi_device * dev)
 	priv(dev)->ai_count -= i;
 }
 
-// empty fifo
-static void pio_drain_ai_fifo(struct comedi_device * dev)
+/* empty fifo */
+static void pio_drain_ai_fifo(struct comedi_device *dev)
 {
 	if (board(dev)->layout == LAYOUT_4020) {
 		pio_drain_ai_fifo_32(dev);
@@ -2908,7 +2903,7 @@ static void pio_drain_ai_fifo(struct comedi_device * dev)
 		pio_drain_ai_fifo_16(dev);
 }
 
-static void drain_dma_buffers(struct comedi_device * dev, unsigned int channel)
+static void drain_dma_buffers(struct comedi_device *dev, unsigned int channel)
 {
 	struct comedi_async *async = dev->read_subdev->async;
 	uint32_t next_transfer_addr;
@@ -2923,7 +2918,7 @@ static void drain_dma_buffers(struct comedi_device * dev, unsigned int channel)
 		pci_addr_reg =
 			priv(dev)->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG;
 
-	// loop until we have read all the full buffers
+	/*  loop until we have read all the full buffers */
 	for (j = 0, next_transfer_addr = readl(pci_addr_reg);
 		(next_transfer_addr <
 			priv(dev)->ai_buffer_bus_addr[priv(dev)->ai_dma_index]
@@ -2931,7 +2926,7 @@ static void drain_dma_buffers(struct comedi_device * dev, unsigned int channel)
 			priv(dev)->ai_buffer_bus_addr[priv(dev)->ai_dma_index] +
 			DMA_BUFFER_SIZE) && j < ai_dma_ring_count(board(dev));
 		j++) {
-		// transfer data from dma buffer to comedi buffer
+		/*  transfer data from dma buffer to comedi buffer */
 		num_samples = dma_transfer_size(dev);
 		if (async->cmd.stop_src == TRIG_COUNT) {
 			if (num_samples > priv(dev)->ai_count)
@@ -2954,7 +2949,7 @@ static void drain_dma_buffers(struct comedi_device * dev, unsigned int channel)
 	 * unused buffer) */
 }
 
-void handle_ai_interrupt(struct comedi_device * dev, unsigned short status,
+void handle_ai_interrupt(struct comedi_device *dev, unsigned short status,
 	unsigned int plx_status)
 {
 	struct comedi_subdevice *s = dev->read_subdev;
@@ -2963,15 +2958,15 @@ void handle_ai_interrupt(struct comedi_device * dev, unsigned short status,
 	uint8_t dma1_status;
 	unsigned long flags;
 
-	// check for fifo overrun
+	/*  check for fifo overrun */
 	if (status & ADC_OVERRUN_BIT) {
 		comedi_error(dev, "fifo overrun");
 		async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
 	}
-	// spin lock makes sure noone else changes plx dma control reg
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	/*  spin lock makes sure noone else changes plx dma control reg */
+	spin_lock_irqsave(&dev->spinlock, flags);
 	dma1_status = readb(priv(dev)->plx9080_iobase + PLX_DMA1_CS_REG);
-	if (plx_status & ICS_DMA1_A) {	// dma chan 1 interrupt
+	if (plx_status & ICS_DMA1_A) {	/*  dma chan 1 interrupt */
 		writeb((dma1_status & PLX_DMA_EN_BIT) | PLX_CLEAR_DMA_INTR_BIT,
 			priv(dev)->plx9080_iobase + PLX_DMA1_CS_REG);
 		DEBUG_PRINT("dma1 status 0x%x\n", dma1_status);
@@ -2981,25 +2976,25 @@ void handle_ai_interrupt(struct comedi_device * dev, unsigned short status,
 		}
 		DEBUG_PRINT(" cleared dma ch1 interrupt\n");
 	}
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
 	if (status & ADC_DONE_BIT)
 		DEBUG_PRINT("adc done interrupt\n");
 
-	// drain fifo with pio
+	/*  drain fifo with pio */
 	if ((status & ADC_DONE_BIT) ||
 		((cmd->flags & TRIG_WAKE_EOS) &&
 			(status & ADC_INTR_PENDING_BIT) &&
 			(board(dev)->layout != LAYOUT_4020))) {
 		DEBUG_PRINT("pio fifo drain\n");
-		comedi_spin_lock_irqsave(&dev->spinlock, flags);
+		spin_lock_irqsave(&dev->spinlock, flags);
 		if (priv(dev)->ai_cmd_running) {
-			comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+			spin_unlock_irqrestore(&dev->spinlock, flags);
 			pio_drain_ai_fifo(dev);
 		} else
-			comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+			spin_unlock_irqrestore(&dev->spinlock, flags);
 	}
-	// if we are have all the data, then quit
+	/*  if we are have all the data, then quit */
 	if ((cmd->stop_src == TRIG_COUNT && priv(dev)->ai_count <= 0) ||
 		(cmd->stop_src == TRIG_EXT && (status & ADC_STOP_BIT))) {
 		async->events |= COMEDI_CB_EOA;
@@ -3008,7 +3003,7 @@ void handle_ai_interrupt(struct comedi_device * dev, unsigned short status,
 	cfc_handle_events(dev, s);
 }
 
-static inline unsigned int prev_ao_dma_index(struct comedi_device * dev)
+static inline unsigned int prev_ao_dma_index(struct comedi_device *dev)
 {
 	unsigned int buffer_index;
 
@@ -3019,7 +3014,7 @@ static inline unsigned int prev_ao_dma_index(struct comedi_device * dev)
 	return buffer_index;
 }
 
-static int last_ao_dma_load_completed(struct comedi_device * dev)
+static int last_ao_dma_load_completed(struct comedi_device *dev)
 {
 	unsigned int buffer_index;
 	unsigned int transfer_address;
@@ -3038,7 +3033,7 @@ static int last_ao_dma_load_completed(struct comedi_device * dev)
 	return 1;
 }
 
-static int ao_stopped_by_error(struct comedi_device * dev, const struct comedi_cmd * cmd)
+static int ao_stopped_by_error(struct comedi_device *dev, const struct comedi_cmd *cmd)
 {
 	if (cmd->stop_src == TRIG_NONE)
 		return 1;
@@ -3051,7 +3046,7 @@ static int ao_stopped_by_error(struct comedi_device * dev, const struct comedi_c
 	return 0;
 }
 
-static inline int ao_dma_needs_restart(struct comedi_device * dev,
+static inline int ao_dma_needs_restart(struct comedi_device *dev,
 	unsigned short dma_status)
 {
 	if ((dma_status & PLX_DMA_DONE_BIT) == 0 ||
@@ -3063,7 +3058,7 @@ static inline int ao_dma_needs_restart(struct comedi_device * dev,
 	return 1;
 }
 
-static void restart_ao_dma(struct comedi_device * dev)
+static void restart_ao_dma(struct comedi_device *dev)
 {
 	unsigned int dma_desc_bits;
 
@@ -3076,7 +3071,7 @@ static void restart_ao_dma(struct comedi_device * dev)
 	dma_start_sync(dev, 0);
 }
 
-static void handle_ao_interrupt(struct comedi_device * dev, unsigned short status,
+static void handle_ao_interrupt(struct comedi_device *dev, unsigned short status,
 	unsigned int plx_status)
 {
 	struct comedi_subdevice *s = dev->write_subdev;
@@ -3091,10 +3086,10 @@ static void handle_ao_interrupt(struct comedi_device * dev, unsigned short statu
 	async = s->async;
 	cmd = &async->cmd;
 
-	// spin lock makes sure noone else changes plx dma control reg
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	/*  spin lock makes sure noone else changes plx dma control reg */
+	spin_lock_irqsave(&dev->spinlock, flags);
 	dma0_status = readb(priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG);
-	if (plx_status & ICS_DMA0_A) {	// dma chan 0 interrupt
+	if (plx_status & ICS_DMA0_A) {	/*  dma chan 0 interrupt */
 		if ((dma0_status & PLX_DMA_EN_BIT)
 			&& !(dma0_status & PLX_DMA_DONE_BIT))
 			writeb(PLX_DMA_EN_BIT | PLX_CLEAR_DMA_INTR_BIT,
@@ -3102,7 +3097,7 @@ static void handle_ao_interrupt(struct comedi_device * dev, unsigned short statu
 		else
 			writeb(PLX_CLEAR_DMA_INTR_BIT,
 				priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG);
-		comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+		spin_unlock_irqrestore(&dev->spinlock, flags);
 		DEBUG_PRINT("dma0 status 0x%x\n", dma0_status);
 		if (dma0_status & PLX_DMA_EN_BIT) {
 			load_ao_dma(dev, cmd);
@@ -3112,7 +3107,7 @@ static void handle_ao_interrupt(struct comedi_device * dev, unsigned short statu
 		}
 		DEBUG_PRINT(" cleared dma ch0 interrupt\n");
 	} else
-		comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+		spin_unlock_irqrestore(&dev->spinlock, flags);
 
 	if ((status & DAC_DONE_BIT)) {
 		async->events |= COMEDI_CB_EOA;
@@ -3128,7 +3123,7 @@ static void handle_ao_interrupt(struct comedi_device * dev, unsigned short statu
 	cfc_handle_events(dev, s);
 }
 
-static irqreturn_t handle_interrupt(int irq, void *d PT_REGS_ARG)
+static irqreturn_t handle_interrupt(int irq, void *d)
 {
 	struct comedi_device *dev = d;
 	unsigned short status;
@@ -3152,8 +3147,8 @@ static irqreturn_t handle_interrupt(int irq, void *d PT_REGS_ARG)
 	handle_ai_interrupt(dev, status, plx_status);
 	handle_ao_interrupt(dev, status, plx_status);
 
-	// clear possible plx9080 interrupt sources
-	if (plx_status & ICS_LDIA) {	// clear local doorbell interrupt
+	/*  clear possible plx9080 interrupt sources */
+	if (plx_status & ICS_LDIA) {	/*  clear local doorbell interrupt */
 		plx_bits = readl(priv(dev)->plx9080_iobase + PLX_DBR_OUT_REG);
 		writel(plx_bits, priv(dev)->plx9080_iobase + PLX_DBR_OUT_REG);
 		DEBUG_PRINT(" cleared local doorbell bits 0x%x\n", plx_bits);
@@ -3164,29 +3159,29 @@ static irqreturn_t handle_interrupt(int irq, void *d PT_REGS_ARG)
 	return IRQ_HANDLED;
 }
 
-void abort_dma(struct comedi_device * dev, unsigned int channel)
+void abort_dma(struct comedi_device *dev, unsigned int channel)
 {
 	unsigned long flags;
 
-	// spinlock for plx dma control/status reg
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	/*  spinlock for plx dma control/status reg */
+	spin_lock_irqsave(&dev->spinlock, flags);
 
 	plx9080_abort_dma(priv(dev)->plx9080_iobase, channel);
 
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 }
 
-static int ai_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	spin_lock_irqsave(&dev->spinlock, flags);
 	if (priv(dev)->ai_cmd_running == 0) {
-		comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+		spin_unlock_irqrestore(&dev->spinlock, flags);
 		return 0;
 	}
 	priv(dev)->ai_cmd_running = 0;
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
 	disable_ai_pacing(dev);
 
@@ -3196,21 +3191,21 @@ static int ai_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
 	return 0;
 }
 
-static int ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int chan = CR_CHAN(insn->chanspec);
 	int range = CR_RANGE(insn->chanspec);
 
-	// do some initializing
+	/*  do some initializing */
 	writew(0, priv(dev)->main_iobase + DAC_CONTROL0_REG);
 
-	// set range
+	/*  set range */
 	set_dac_range_bits(dev, &priv(dev)->dac_control1_bits, chan, range);
 	writew(priv(dev)->dac_control1_bits,
 		priv(dev)->main_iobase + DAC_CONTROL1_REG);
 
-	// write to channel
+	/*  write to channel */
 	if (board(dev)->layout == LAYOUT_4020) {
 		writew(data[0] & 0xff,
 			priv(dev)->main_iobase + dac_lsb_4020_reg(chan));
@@ -3220,21 +3215,21 @@ static int ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
 		writew(data[0], priv(dev)->main_iobase + dac_convert_reg(chan));
 	}
 
-	// remember output value
+	/*  remember output value */
 	priv(dev)->ao_value[chan] = data[0];
 
 	return 1;
 }
 
-static int ao_readback_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ao_readback_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	data[0] = priv(dev)->ao_value[CR_CHAN(insn->chanspec)];
 
 	return 1;
 }
 
-static void set_dac_control0_reg(struct comedi_device * dev, const struct comedi_cmd * cmd)
+static void set_dac_control0_reg(struct comedi_device *dev, const struct comedi_cmd *cmd)
 {
 	unsigned int bits = DAC_ENABLE_BIT | WAVEFORM_GATE_LEVEL_BIT |
 		WAVEFORM_GATE_ENABLE_BIT | WAVEFORM_GATE_SELECT_BIT;
@@ -3254,7 +3249,7 @@ static void set_dac_control0_reg(struct comedi_device * dev, const struct comedi
 	writew(bits, priv(dev)->main_iobase + DAC_CONTROL0_REG);
 }
 
-static void set_dac_control1_reg(struct comedi_device * dev, const struct comedi_cmd * cmd)
+static void set_dac_control1_reg(struct comedi_device *dev, const struct comedi_cmd *cmd)
 {
 	int i;
 
@@ -3271,7 +3266,7 @@ static void set_dac_control1_reg(struct comedi_device * dev, const struct comedi
 		priv(dev)->main_iobase + DAC_CONTROL1_REG);
 }
 
-static void set_dac_select_reg(struct comedi_device * dev, const struct comedi_cmd * cmd)
+static void set_dac_select_reg(struct comedi_device *dev, const struct comedi_cmd *cmd)
 {
 	uint16_t bits;
 	unsigned int first_channel, last_channel;
@@ -3286,7 +3281,7 @@ static void set_dac_select_reg(struct comedi_device * dev, const struct comedi_c
 	writew(bits, priv(dev)->main_iobase + DAC_SELECT_REG);
 }
 
-static void set_dac_interval_regs(struct comedi_device * dev, const struct comedi_cmd * cmd)
+static void set_dac_interval_regs(struct comedi_device *dev, const struct comedi_cmd *cmd)
 {
 	unsigned int divisor;
 
@@ -3304,8 +3299,8 @@ static void set_dac_interval_regs(struct comedi_device * dev, const struct comed
 		priv(dev)->main_iobase + DAC_SAMPLE_INTERVAL_UPPER_REG);
 }
 
-static unsigned int load_ao_dma_buffer(struct comedi_device * dev,
-	const struct comedi_cmd * cmd)
+static unsigned int load_ao_dma_buffer(struct comedi_device *dev,
+	const struct comedi_cmd *cmd)
 {
 	unsigned int num_bytes, buffer_index, prev_buffer_index;
 	unsigned int next_bits;
@@ -3348,7 +3343,7 @@ static unsigned int load_ao_dma_buffer(struct comedi_device * dev,
 	return num_bytes;
 }
 
-static void load_ao_dma(struct comedi_device * dev, const struct comedi_cmd * cmd)
+static void load_ao_dma(struct comedi_device *dev, const struct comedi_cmd *cmd)
 {
 	unsigned int num_bytes;
 	unsigned int next_transfer_addr;
@@ -3370,7 +3365,7 @@ static void load_ao_dma(struct comedi_device * dev, const struct comedi_cmd * cm
 	} while (num_bytes >= DMA_BUFFER_SIZE);
 }
 
-static int prep_ao_dma(struct comedi_device * dev, const struct comedi_cmd * cmd)
+static int prep_ao_dma(struct comedi_device *dev, const struct comedi_cmd *cmd)
 {
 	unsigned int num_bytes;
 	int i;
@@ -3404,7 +3399,7 @@ static int prep_ao_dma(struct comedi_device * dev, const struct comedi_cmd * cmd
 	return 0;
 }
 
-static inline int external_ai_queue_in_use(struct comedi_device * dev)
+static inline int external_ai_queue_in_use(struct comedi_device *dev)
 {
 	if (dev->read_subdev->busy)
 		return 0;
@@ -3415,7 +3410,7 @@ static inline int external_ai_queue_in_use(struct comedi_device * dev)
 	return 1;
 }
 
-static int ao_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct comedi_cmd *cmd = &s->async->cmd;
 
@@ -3440,7 +3435,7 @@ static int ao_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 	return 0;
 }
 
-static int ao_inttrig(struct comedi_device * dev, struct comedi_subdevice * s,
+static int ao_inttrig(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int trig_num)
 {
 	struct comedi_cmd *cmd = &s->async->cmd;
@@ -3463,8 +3458,8 @@ static int ao_inttrig(struct comedi_device * dev, struct comedi_subdevice * s,
 	return 0;
 }
 
-static int ao_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int ao_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	int tmp;
@@ -3503,14 +3498,14 @@ static int ao_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
 
 	/* step 2: make sure trigger sources are unique and mutually compatible */
 
-	// uniqueness check
+	/*  uniqueness check */
 	if (cmd->start_src != TRIG_INT && cmd->start_src != TRIG_EXT)
 		err++;
 	if (cmd->scan_begin_src != TRIG_TIMER &&
 		cmd->scan_begin_src != TRIG_EXT)
 		err++;
 
-	// compatibility check
+	/*  compatibility check */
 	if (cmd->convert_src == TRIG_EXT && cmd->scan_begin_src == TRIG_TIMER)
 		err++;
 	if (cmd->stop_src != TRIG_COUNT &&
@@ -3579,7 +3574,7 @@ static int ao_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
 	return 0;
 }
 
-static int ao_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int ao_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	writew(0x0, priv(dev)->main_iobase + DAC_CONTROL0_REG);
 	abort_dma(dev, 0);
@@ -3607,8 +3602,8 @@ static int dio_callback_4020(int dir, int port, int data, unsigned long iobase)
 	}
 }
 
-static int di_rbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int di_rbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int bits;
 
@@ -3620,13 +3615,13 @@ static int di_rbits(struct comedi_device * dev, struct comedi_subdevice * s,
 	return 2;
 }
 
-static int do_wbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int do_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	data[0] &= 0xf;
-	// zero bits we are going to change
+	/*  zero bits we are going to change */
 	s->state &= ~data[0];
-	// set new bits
+	/*  set new bits */
 	s->state |= data[0] & data[1];
 
 	writeb(s->state, priv(dev)->dio_counter_iobase + DO_REG);
@@ -3636,8 +3631,8 @@ static int do_wbits(struct comedi_device * dev, struct comedi_subdevice * s,
 	return 2;
 }
 
-static int dio_60xx_config_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dio_60xx_config_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int mask;
 
@@ -3663,8 +3658,8 @@ static int dio_60xx_config_insn(struct comedi_device * dev, struct comedi_subdev
 	return 1;
 }
 
-static int dio_60xx_wbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dio_60xx_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (data[0]) {
 		s->state &= ~data[0];
@@ -3678,7 +3673,7 @@ static int dio_60xx_wbits(struct comedi_device * dev, struct comedi_subdevice *
 	return 2;
 }
 
-static void caldac_write(struct comedi_device * dev, unsigned int channel,
+static void caldac_write(struct comedi_device *dev, unsigned int channel,
 	unsigned int value)
 {
 	priv(dev)->caldac_state[channel] = value;
@@ -3696,8 +3691,8 @@ static void caldac_write(struct comedi_device * dev, unsigned int channel,
 	}
 }
 
-static int calib_write_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int calib_write_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int channel = CR_CHAN(insn->chanspec);
 
@@ -3711,8 +3706,8 @@ static int calib_write_insn(struct comedi_device * dev, struct comedi_subdevice
 	return 1;
 }
 
-static int calib_read_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int calib_read_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int channel = CR_CHAN(insn->chanspec);
 
@@ -3721,18 +3716,18 @@ static int calib_read_insn(struct comedi_device * dev, struct comedi_subdevice *
 	return 1;
 }
 
-static void ad8402_write(struct comedi_device * dev, unsigned int channel,
+static void ad8402_write(struct comedi_device *dev, unsigned int channel,
 	unsigned int value)
 {
 	static const int bitstream_length = 10;
 	unsigned int bit, register_bits;
 	unsigned int bitstream = ((channel & 0x3) << 8) | (value & 0xff);
-	static const int ad8402_comedi_udelay = 1;
+	static const int ad8402_udelay = 1;
 
 	priv(dev)->ad8402_state[channel] = value;
 
 	register_bits = SELECT_8402_64XX_BIT;
-	comedi_udelay(ad8402_comedi_udelay);
+	udelay(ad8402_udelay);
 	writew(register_bits, priv(dev)->main_iobase + CALIBRATION_REG);
 
 	for (bit = 1 << (bitstream_length - 1); bit; bit >>= 1) {
@@ -3740,20 +3735,20 @@ static void ad8402_write(struct comedi_device * dev, unsigned int channel,
 			register_bits |= SERIAL_DATA_IN_BIT;
 		else
 			register_bits &= ~SERIAL_DATA_IN_BIT;
-		comedi_udelay(ad8402_comedi_udelay);
+		udelay(ad8402_udelay);
 		writew(register_bits, priv(dev)->main_iobase + CALIBRATION_REG);
-		comedi_udelay(ad8402_comedi_udelay);
+		udelay(ad8402_udelay);
 		writew(register_bits | SERIAL_CLOCK_BIT,
 			priv(dev)->main_iobase + CALIBRATION_REG);
 	}
 
-	comedi_udelay(ad8402_comedi_udelay);
+	udelay(ad8402_udelay);
 	writew(0, priv(dev)->main_iobase + CALIBRATION_REG);
 }
 
 /* for pci-das6402/16, channel 0 is analog input gain and channel 1 is offset */
-static int ad8402_write_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ad8402_write_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int channel = CR_CHAN(insn->chanspec);
 
@@ -3769,8 +3764,8 @@ static int ad8402_write_insn(struct comedi_device * dev, struct comedi_subdevice
 	return 1;
 }
 
-static int ad8402_read_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ad8402_read_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int channel = CR_CHAN(insn->chanspec);
 
@@ -3779,7 +3774,7 @@ static int ad8402_read_insn(struct comedi_device * dev, struct comedi_subdevice
 	return 1;
 }
 
-static uint16_t read_eeprom(struct comedi_device * dev, uint8_t address)
+static uint16_t read_eeprom(struct comedi_device *dev, uint8_t address)
 {
 	static const int bitstream_length = 11;
 	static const int read_command = 0x6;
@@ -3789,60 +3784,60 @@ static uint16_t read_eeprom(struct comedi_device * dev, uint8_t address)
 		priv(dev)->plx9080_iobase + PLX_CONTROL_REG;
 	uint16_t value;
 	static const int value_length = 16;
-	static const int eeprom_comedi_udelay = 1;
+	static const int eeprom_udelay = 1;
 
-	comedi_udelay(eeprom_comedi_udelay);
+	udelay(eeprom_udelay);
 	priv(dev)->plx_control_bits &= ~CTL_EE_CLK & ~CTL_EE_CS;
-	// make sure we don't send anything to the i2c bus on 4020
+	/*  make sure we don't send anything to the i2c bus on 4020 */
 	priv(dev)->plx_control_bits |= CTL_USERO;
 	writel(priv(dev)->plx_control_bits, plx_control_addr);
-	// activate serial eeprom
-	comedi_udelay(eeprom_comedi_udelay);
+	/*  activate serial eeprom */
+	udelay(eeprom_udelay);
 	priv(dev)->plx_control_bits |= CTL_EE_CS;
 	writel(priv(dev)->plx_control_bits, plx_control_addr);
 
-	// write read command and desired memory address
+	/*  write read command and desired memory address */
 	for (bit = 1 << (bitstream_length - 1); bit; bit >>= 1) {
-		// set bit to be written
-		comedi_udelay(eeprom_comedi_udelay);
+		/*  set bit to be written */
+		udelay(eeprom_udelay);
 		if (bitstream & bit)
 			priv(dev)->plx_control_bits |= CTL_EE_W;
 		else
 			priv(dev)->plx_control_bits &= ~CTL_EE_W;
 		writel(priv(dev)->plx_control_bits, plx_control_addr);
-		// clock in bit
-		comedi_udelay(eeprom_comedi_udelay);
+		/*  clock in bit */
+		udelay(eeprom_udelay);
 		priv(dev)->plx_control_bits |= CTL_EE_CLK;
 		writel(priv(dev)->plx_control_bits, plx_control_addr);
-		comedi_udelay(eeprom_comedi_udelay);
+		udelay(eeprom_udelay);
 		priv(dev)->plx_control_bits &= ~CTL_EE_CLK;
 		writel(priv(dev)->plx_control_bits, plx_control_addr);
 	}
-	// read back value from eeprom memory location
+	/*  read back value from eeprom memory location */
 	value = 0;
 	for (bit = 1 << (value_length - 1); bit; bit >>= 1) {
-		// clock out bit
-		comedi_udelay(eeprom_comedi_udelay);
+		/*  clock out bit */
+		udelay(eeprom_udelay);
 		priv(dev)->plx_control_bits |= CTL_EE_CLK;
 		writel(priv(dev)->plx_control_bits, plx_control_addr);
-		comedi_udelay(eeprom_comedi_udelay);
+		udelay(eeprom_udelay);
 		priv(dev)->plx_control_bits &= ~CTL_EE_CLK;
 		writel(priv(dev)->plx_control_bits, plx_control_addr);
-		comedi_udelay(eeprom_comedi_udelay);
+		udelay(eeprom_udelay);
 		if (readl(plx_control_addr) & CTL_EE_R)
 			value |= bit;
 	}
 
-	// deactivate eeprom serial input
-	comedi_udelay(eeprom_comedi_udelay);
+	/*  deactivate eeprom serial input */
+	udelay(eeprom_udelay);
 	priv(dev)->plx_control_bits &= ~CTL_EE_CS;
 	writel(priv(dev)->plx_control_bits, plx_control_addr);
 
 	return value;
 }
 
-static int eeprom_read_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int eeprom_read_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	data[0] = read_eeprom(dev, CR_CHAN(insn->chanspec));
 
@@ -3880,7 +3875,7 @@ static void check_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd)
 	if (cmd->scan_begin_src == TRIG_TIMER) {
 		scan_divisor = get_divisor(cmd->scan_begin_arg, cmd->flags);
 		if (cmd->convert_src == TRIG_TIMER) {
-			// XXX check for integer overflows
+			/*  XXX check for integer overflows */
 			min_scan_divisor = convert_divisor * cmd->chanlist_len;
 			max_scan_divisor =
 				(convert_divisor * cmd->chanlist_len - 1) +
@@ -3926,8 +3921,8 @@ static unsigned int get_ao_divisor(unsigned int ns, unsigned int flags)
 	return get_divisor(ns, flags) - 2;
 }
 
-// adjusts the size of hardware fifo (which determines block size for dma xfers)
-static int set_ai_fifo_size(struct comedi_device * dev, unsigned int num_samples)
+/* adjusts the size of hardware fifo (which determines block size for dma xfers) */
+static int set_ai_fifo_size(struct comedi_device *dev, unsigned int num_samples)
 {
 	unsigned int num_fifo_entries;
 	int retval;
@@ -3947,15 +3942,15 @@ static int set_ai_fifo_size(struct comedi_device * dev, unsigned int num_samples
 	return num_samples;
 }
 
-// query length of fifo
-static unsigned int ai_fifo_size(struct comedi_device * dev)
+/* query length of fifo */
+static unsigned int ai_fifo_size(struct comedi_device *dev)
 {
 	return priv(dev)->ai_fifo_segment_length *
 		board(dev)->ai_fifo->num_segments *
 		board(dev)->ai_fifo->sample_packing_ratio;
 }
 
-static int set_ai_fifo_segment_length(struct comedi_device * dev,
+static int set_ai_fifo_segment_length(struct comedi_device *dev,
 	unsigned int num_entries)
 {
 	static const int increment_size = 0x100;
@@ -3968,7 +3963,7 @@ static int set_ai_fifo_segment_length(struct comedi_device * dev,
 	if (num_entries > fifo->max_segment_length)
 		num_entries = fifo->max_segment_length;
 
-	// 1 == 256 entries, 2 == 512 entries, etc
+	/*  1 == 256 entries, 2 == 512 entries, etc */
 	num_increments = (num_entries + increment_size / 2) / increment_size;
 
 	bits = (~(num_increments - 1)) & fifo->fifo_size_reg_mask;
@@ -4006,7 +4001,7 @@ static int set_ai_fifo_segment_length(struct comedi_device * dev,
  * address 7 == dac channel 1 fine offset
 */
 
-static int caldac_8800_write(struct comedi_device * dev, unsigned int address,
+static int caldac_8800_write(struct comedi_device *dev, unsigned int address,
 	uint8_t value)
 {
 	static const int num_caldac_channels = 8;
@@ -4023,28 +4018,28 @@ static int caldac_8800_write(struct comedi_device * dev, unsigned int address,
 		register_bits = 0;
 		if (bitstream & bit)
 			register_bits |= SERIAL_DATA_IN_BIT;
-		comedi_udelay(caldac_8800_udelay);
+		udelay(caldac_8800_udelay);
 		writew(register_bits, priv(dev)->main_iobase + CALIBRATION_REG);
 		register_bits |= SERIAL_CLOCK_BIT;
-		comedi_udelay(caldac_8800_udelay);
+		udelay(caldac_8800_udelay);
 		writew(register_bits, priv(dev)->main_iobase + CALIBRATION_REG);
 	}
-	comedi_udelay(caldac_8800_udelay);
+	udelay(caldac_8800_udelay);
 	writew(SELECT_8800_BIT, priv(dev)->main_iobase + CALIBRATION_REG);
-	comedi_udelay(caldac_8800_udelay);
+	udelay(caldac_8800_udelay);
 	writew(0, priv(dev)->main_iobase + CALIBRATION_REG);
-	comedi_udelay(caldac_8800_udelay);
+	udelay(caldac_8800_udelay);
 	return 0;
 }
 
-// 4020 caldacs
-static int caldac_i2c_write(struct comedi_device * dev, unsigned int caldac_channel,
+/* 4020 caldacs */
+static int caldac_i2c_write(struct comedi_device *dev, unsigned int caldac_channel,
 	unsigned int value)
 {
 	uint8_t serial_bytes[3];
 	uint8_t i2c_addr;
 	enum pointer_bits {
-		// manual has gain and offset bits switched
+		/*  manual has gain and offset bits switched */
 		OFFSET_0_2 = 0x1,
 		GAIN_0_2 = 0x2,
 		OFFSET_1_3 = 0x4,
@@ -4055,35 +4050,35 @@ static int caldac_i2c_write(struct comedi_device * dev, unsigned int caldac_chan
 	};
 
 	switch (caldac_channel) {
-	case 0:		// chan 0 offset
+	case 0:		/*  chan 0 offset */
 		i2c_addr = CALDAC0_I2C_ADDR;
 		serial_bytes[0] = OFFSET_0_2;
 		break;
-	case 1:		// chan 1 offset
+	case 1:		/*  chan 1 offset */
 		i2c_addr = CALDAC0_I2C_ADDR;
 		serial_bytes[0] = OFFSET_1_3;
 		break;
-	case 2:		// chan 2 offset
+	case 2:		/*  chan 2 offset */
 		i2c_addr = CALDAC1_I2C_ADDR;
 		serial_bytes[0] = OFFSET_0_2;
 		break;
-	case 3:		// chan 3 offset
+	case 3:		/*  chan 3 offset */
 		i2c_addr = CALDAC1_I2C_ADDR;
 		serial_bytes[0] = OFFSET_1_3;
 		break;
-	case 4:		// chan 0 gain
+	case 4:		/*  chan 0 gain */
 		i2c_addr = CALDAC0_I2C_ADDR;
 		serial_bytes[0] = GAIN_0_2;
 		break;
-	case 5:		// chan 1 gain
+	case 5:		/*  chan 1 gain */
 		i2c_addr = CALDAC0_I2C_ADDR;
 		serial_bytes[0] = GAIN_1_3;
 		break;
-	case 6:		// chan 2 gain
+	case 6:		/*  chan 2 gain */
 		i2c_addr = CALDAC1_I2C_ADDR;
 		serial_bytes[0] = GAIN_0_2;
 		break;
-	case 7:		// chan 3 gain
+	case 7:		/*  chan 3 gain */
 		i2c_addr = CALDAC1_I2C_ADDR;
 		serial_bytes[0] = GAIN_1_3;
 		break;
@@ -4098,49 +4093,49 @@ static int caldac_i2c_write(struct comedi_device * dev, unsigned int caldac_chan
 	return 0;
 }
 
-// Their i2c requires a huge delay on setting clock or data high for some reason
-static const int i2c_high_comedi_udelay = 1000;
-static const int i2c_low_comedi_udelay = 10;
+/* Their i2c requires a huge delay on setting clock or data high for some reason */
+static const int i2c_high_udelay = 1000;
+static const int i2c_low_udelay = 10;
 
-// set i2c data line high or low
-static void i2c_set_sda(struct comedi_device * dev, int state)
+/* set i2c data line high or low */
+static void i2c_set_sda(struct comedi_device *dev, int state)
 {
 	static const int data_bit = CTL_EE_W;
 	void *plx_control_addr = priv(dev)->plx9080_iobase + PLX_CONTROL_REG;
 
 	if (state) {
-		// set data line high
+		/*  set data line high */
 		priv(dev)->plx_control_bits &= ~data_bit;
 		writel(priv(dev)->plx_control_bits, plx_control_addr);
-		comedi_udelay(i2c_high_comedi_udelay);
-	} else			// set data line low
+		udelay(i2c_high_udelay);
+	} else			/*  set data line low */
 	{
 		priv(dev)->plx_control_bits |= data_bit;
 		writel(priv(dev)->plx_control_bits, plx_control_addr);
-		comedi_udelay(i2c_low_comedi_udelay);
+		udelay(i2c_low_udelay);
 	}
 }
 
-// set i2c clock line high or low
-static void i2c_set_scl(struct comedi_device * dev, int state)
+/* set i2c clock line high or low */
+static void i2c_set_scl(struct comedi_device *dev, int state)
 {
 	static const int clock_bit = CTL_USERO;
 	void *plx_control_addr = priv(dev)->plx9080_iobase + PLX_CONTROL_REG;
 
 	if (state) {
-		// set clock line high
+		/*  set clock line high */
 		priv(dev)->plx_control_bits &= ~clock_bit;
 		writel(priv(dev)->plx_control_bits, plx_control_addr);
-		comedi_udelay(i2c_high_comedi_udelay);
-	} else			// set clock line low
+		udelay(i2c_high_udelay);
+	} else			/*  set clock line low */
 	{
 		priv(dev)->plx_control_bits |= clock_bit;
 		writel(priv(dev)->plx_control_bits, plx_control_addr);
-		comedi_udelay(i2c_low_comedi_udelay);
+		udelay(i2c_low_udelay);
 	}
 }
 
-static void i2c_write_byte(struct comedi_device * dev, uint8_t byte)
+static void i2c_write_byte(struct comedi_device *dev, uint8_t byte)
 {
 	uint8_t bit;
 	unsigned int num_bits = 8;
@@ -4157,26 +4152,26 @@ static void i2c_write_byte(struct comedi_device * dev, uint8_t byte)
 	}
 }
 
-// we can't really read the lines, so fake it
-static int i2c_read_ack(struct comedi_device * dev)
+/* we can't really read the lines, so fake it */
+static int i2c_read_ack(struct comedi_device *dev)
 {
 	i2c_set_scl(dev, 0);
 	i2c_set_sda(dev, 1);
 	i2c_set_scl(dev, 1);
 
-	return 0;		// return fake acknowledge bit
+	return 0;		/*  return fake acknowledge bit */
 }
 
-// send start bit
-static void i2c_start(struct comedi_device * dev)
+/* send start bit */
+static void i2c_start(struct comedi_device *dev)
 {
 	i2c_set_scl(dev, 1);
 	i2c_set_sda(dev, 1);
 	i2c_set_sda(dev, 0);
 }
 
-// send stop bit
-static void i2c_stop(struct comedi_device * dev)
+/* send stop bit */
+static void i2c_stop(struct comedi_device *dev)
 {
 	i2c_set_scl(dev, 0);
 	i2c_set_sda(dev, 0);
@@ -4184,32 +4179,32 @@ static void i2c_stop(struct comedi_device * dev)
 	i2c_set_sda(dev, 1);
 }
 
-static void i2c_write(struct comedi_device * dev, unsigned int address,
-	const uint8_t * data, unsigned int length)
+static void i2c_write(struct comedi_device *dev, unsigned int address,
+	const uint8_t *data, unsigned int length)
 {
 	unsigned int i;
 	uint8_t bitstream;
 	static const int read_bit = 0x1;
 
-//XXX need mutex to prevent simultaneous attempts to access eeprom and i2c bus
+/* XXX need mutex to prevent simultaneous attempts to access eeprom and i2c bus */
 
-	// make sure we dont send anything to eeprom
+	/*  make sure we dont send anything to eeprom */
 	priv(dev)->plx_control_bits &= ~CTL_EE_CS;
 
 	i2c_stop(dev);
 	i2c_start(dev);
 
-	// send address and write bit
+	/*  send address and write bit */
 	bitstream = (address << 1) & ~read_bit;
 	i2c_write_byte(dev, bitstream);
 
-	// get acknowledge
+	/*  get acknowledge */
 	if (i2c_read_ack(dev) != 0) {
 		comedi_error(dev, "i2c write failed: no acknowledge");
 		i2c_stop(dev);
 		return;
 	}
-	// write data bytes
+	/*  write data bytes */
 	for (i = 0; i < length; i++) {
 		i2c_write_byte(dev, data[i]);
 		if (i2c_read_ack(dev) != 0) {
diff --git a/drivers/staging/comedi/drivers/cb_pcidda.c b/drivers/staging/comedi/drivers/cb_pcidda.c
index ed0a5eb3dd9..8f362941618 100644
--- a/drivers/staging/comedi/drivers/cb_pcidda.c
+++ b/drivers/staging/comedi/drivers/cb_pcidda.c
@@ -51,66 +51,66 @@ Please report success/failure with other different cards to
 #include "comedi_pci.h"
 #include "8255.h"
 
-#define PCI_VENDOR_ID_CB	0x1307	// PCI vendor number of ComputerBoards
-#define N_BOARDS	10	// Number of boards in cb_pcidda_boards
-#define EEPROM_SIZE	128	// number of entries in eeprom
-#define MAX_AO_CHANNELS 8	// maximum number of ao channels for supported boards
+#define PCI_VENDOR_ID_CB	0x1307	/*  PCI vendor number of ComputerBoards */
+#define N_BOARDS	10	/*  Number of boards in cb_pcidda_boards */
+#define EEPROM_SIZE	128	/*  number of entries in eeprom */
+#define MAX_AO_CHANNELS 8	/*  maximum number of ao channels for supported boards */
 
 /* PCI-DDA base addresses */
 #define DIGITALIO_BADRINDEX	2
-	// DIGITAL I/O is pci_dev->resource[2]
+	/*  DIGITAL I/O is pci_dev->resource[2] */
 #define DIGITALIO_SIZE 8
-	// DIGITAL I/O uses 8 I/O port addresses
+	/*  DIGITAL I/O uses 8 I/O port addresses */
 #define DAC_BADRINDEX	3
-	// DAC is pci_dev->resource[3]
+	/*  DAC is pci_dev->resource[3] */
 
 /* Digital I/O registers */
-#define PORT1A 0		// PORT 1A DATA
+#define PORT1A 0		/*  PORT 1A DATA */
 
-#define PORT1B 1		// PORT 1B DATA
+#define PORT1B 1		/*  PORT 1B DATA */
 
-#define PORT1C 2		// PORT 1C DATA
+#define PORT1C 2		/*  PORT 1C DATA */
 
-#define CONTROL1 3		// CONTROL REGISTER 1
+#define CONTROL1 3		/*  CONTROL REGISTER 1 */
 
-#define PORT2A 4		// PORT 2A DATA
+#define PORT2A 4		/*  PORT 2A DATA */
 
-#define PORT2B 5		// PORT 2B DATA
+#define PORT2B 5		/*  PORT 2B DATA */
 
-#define PORT2C 6		// PORT 2C DATA
+#define PORT2C 6		/*  PORT 2C DATA */
 
-#define CONTROL2 7		// CONTROL REGISTER 2
+#define CONTROL2 7		/*  CONTROL REGISTER 2 */
 
 /* DAC registers */
-#define DACONTROL	0	// D/A CONTROL REGISTER
-#define	SU	0000001		// Simultaneous update enabled
-#define NOSU	0000000		// Simultaneous update disabled
-#define	ENABLEDAC	0000002	// Enable specified DAC
-#define	DISABLEDAC	0000000	// Disable specified DAC
-#define RANGE2V5	0000000	// 2.5V
-#define RANGE5V	0000200		// 5V
-#define RANGE10V	0000300	// 10V
-#define UNIP	0000400		// Unipolar outputs
-#define BIP	0000000		// Bipolar outputs
-
-#define DACALIBRATION1	4	// D/A CALIBRATION REGISTER 1
-//write bits
-#define	SERIAL_IN_BIT	0x1	// serial data input for eeprom, caldacs, reference dac
+#define DACONTROL	0	/*  D/A CONTROL REGISTER */
+#define	SU	0000001		/*  Simultaneous update enabled */
+#define NOSU	0000000		/*  Simultaneous update disabled */
+#define	ENABLEDAC	0000002	/*  Enable specified DAC */
+#define	DISABLEDAC	0000000	/*  Disable specified DAC */
+#define RANGE2V5	0000000	/*  2.5V */
+#define RANGE5V	0000200		/*  5V */
+#define RANGE10V	0000300	/*  10V */
+#define UNIP	0000400		/*  Unipolar outputs */
+#define BIP	0000000		/*  Bipolar outputs */
+
+#define DACALIBRATION1	4	/*  D/A CALIBRATION REGISTER 1 */
+/* write bits */
+#define	SERIAL_IN_BIT	0x1	/*  serial data input for eeprom, caldacs, reference dac */
 #define	CAL_CHANNEL_MASK	(0x7 << 1)
 #define	CAL_CHANNEL_BITS(channel)	(((channel) << 1) & CAL_CHANNEL_MASK)
-//read bits
+/* read bits */
 #define	CAL_COUNTER_MASK	0x1f
-#define	CAL_COUNTER_OVERFLOW_BIT	0x20	// calibration counter overflow status bit
-#define	AO_BELOW_REF_BIT	0x40	// analog output is less than reference dac voltage
-#define	SERIAL_OUT_BIT	0x80	// serial data out, for reading from eeprom
+#define	CAL_COUNTER_OVERFLOW_BIT	0x20	/*  calibration counter overflow status bit */
+#define	AO_BELOW_REF_BIT	0x40	/*  analog output is less than reference dac voltage */
+#define	SERIAL_OUT_BIT	0x80	/*  serial data out, for reading from eeprom */
 
-#define DACALIBRATION2	6	// D/A CALIBRATION REGISTER 2
-#define	SELECT_EEPROM_BIT	0x1	// send serial data in to eeprom
-#define	DESELECT_REF_DAC_BIT	0x2	// don't send serial data to MAX542 reference dac
-#define	DESELECT_CALDAC_BIT(n)	(0x4 << (n))	// don't send serial data to caldac n
-#define	DUMMY_BIT	0x40	// manual says to set this bit with no explanation
+#define DACALIBRATION2	6	/*  D/A CALIBRATION REGISTER 2 */
+#define	SELECT_EEPROM_BIT	0x1	/*  send serial data in to eeprom */
+#define	DESELECT_REF_DAC_BIT	0x2	/*  don't send serial data to MAX542 reference dac */
+#define	DESELECT_CALDAC_BIT(n)	(0x4 << (n))	/*  don't send serial data to caldac n */
+#define	DUMMY_BIT	0x40	/*  manual says to set this bit with no explanation */
 
-#define DADATA	8		// FIRST D/A DATA REGISTER (0)
+#define DADATA	8		/*  FIRST D/A DATA REGISTER (0) */
 
 static const struct comedi_lrange cb_pcidda_ranges = {
 	6,
@@ -131,63 +131,68 @@ static const struct comedi_lrange cb_pcidda_ranges = {
  */
 struct cb_pcidda_board {
 	const char *name;
-	char status;		// Driver status:
-	// 0 - tested
-	// 1 - manual read, not tested
-	// 2 - manual not read
+	char status;		/*  Driver status: */
+
+	/*
+	 * 0 - tested
+	 * 1 - manual read, not tested
+	 * 2 - manual not read
+	 */
+
 	unsigned short device_id;
 	int ao_chans;
 	int ao_bits;
 	const struct comedi_lrange *ranges;
 };
+
 static const struct cb_pcidda_board cb_pcidda_boards[] = {
 	{
-	      name:	"pci-dda02/12",
-	      status:	1,
-	      device_id:0x20,
-	      ao_chans:2,
-	      ao_bits:	12,
-	      ranges:	&cb_pcidda_ranges,
+	.name = "pci-dda02/12",
+	.status = 1,
+	.device_id = 0x20,
+	.ao_chans = 2,
+	.ao_bits = 12,
+	.ranges = &cb_pcidda_ranges,
 		},
 	{
-	      name:	"pci-dda04/12",
-	      status:	1,
-	      device_id:0x21,
-	      ao_chans:4,
-	      ao_bits:	12,
-	      ranges:	&cb_pcidda_ranges,
+	.name = "pci-dda04/12",
+	.status = 1,
+	.device_id = 0x21,
+	.ao_chans = 4,
+	.ao_bits = 12,
+	.ranges = &cb_pcidda_ranges,
 		},
 	{
-	      name:	"pci-dda08/12",
-	      status:	0,
-	      device_id:0x22,
-	      ao_chans:8,
-	      ao_bits:	12,
-	      ranges:	&cb_pcidda_ranges,
+	.name = "pci-dda08/12",
+	.status = 0,
+	.device_id = 0x22,
+	.ao_chans = 8,
+	.ao_bits = 12,
+	.ranges = &cb_pcidda_ranges,
 		},
 	{
-	      name:	"pci-dda02/16",
-	      status:	2,
-	      device_id:0x23,
-	      ao_chans:2,
-	      ao_bits:	16,
-	      ranges:	&cb_pcidda_ranges,
+	.name = "pci-dda02/16",
+	.status = 2,
+	.device_id = 0x23,
+	.ao_chans = 2,
+	.ao_bits = 16,
+	.ranges = &cb_pcidda_ranges,
 		},
 	{
-	      name:	"pci-dda04/16",
-	      status:	2,
-	      device_id:0x24,
-	      ao_chans:4,
-	      ao_bits:	16,
-	      ranges:	&cb_pcidda_ranges,
+	.name = "pci-dda04/16",
+	.status = 2,
+	.device_id = 0x24,
+	.ao_chans = 4,
+	.ao_bits = 16,
+	.ranges = &cb_pcidda_ranges,
 		},
 	{
-	      name:	"pci-dda08/16",
-	      status:	0,
-	      device_id:0x25,
-	      ao_chans:8,
-	      ao_bits:	16,
-	      ranges:	&cb_pcidda_ranges,
+	.name = "pci-dda08/16",
+	.status = 0,
+	.device_id = 0x25,
+	.ao_chans = 8,
+	.ao_bits = 16,
+	.ranges = &cb_pcidda_ranges,
 		},
 };
 
@@ -219,11 +224,13 @@ struct cb_pcidda_private {
 
 	unsigned long digitalio;
 	unsigned long dac;
-	//unsigned long control_status;
-	//unsigned long adc_fifo;
-	unsigned int dac_cal1_bits;	// bits last written to da calibration register 1
-	unsigned int ao_range[MAX_AO_CHANNELS];	// current range settings for output channels
-	u16 eeprom_data[EEPROM_SIZE];	// software copy of board's eeprom
+
+	/* unsigned long control_status; */
+	/* unsigned long adc_fifo; */
+
+	unsigned int dac_cal1_bits;	/*  bits last written to da calibration register 1 */
+	unsigned int ao_range[MAX_AO_CHANNELS];	/*  current range settings for output channels */
+	u16 eeprom_data[EEPROM_SIZE];	/*  software copy of board's eeprom */
 };
 
 /*
@@ -232,20 +239,22 @@ struct cb_pcidda_private {
  */
 #define devpriv ((struct cb_pcidda_private *)dev->private)
 
-static int cb_pcidda_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int cb_pcidda_detach(struct comedi_device * dev);
-//static int cb_pcidda_ai_rinsn(struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data);
-static int cb_pcidda_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-//static int cb_pcidda_ai_cmd(struct comedi_device *dev,struct comedi_subdevice *s);
-//static int cb_pcidda_ai_cmdtest(struct comedi_device *dev,struct comedi_subdevice *s, struct comedi_cmd *cmd);
-//static int cb_pcidda_ns_to_timer(unsigned int *ns,int round);
-static unsigned int cb_pcidda_serial_in(struct comedi_device * dev);
-static void cb_pcidda_serial_out(struct comedi_device * dev, unsigned int value,
+static int cb_pcidda_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int cb_pcidda_detach(struct comedi_device *dev);
+/* static int cb_pcidda_ai_rinsn(struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data); */
+static int cb_pcidda_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+
+/* static int cb_pcidda_ai_cmd(struct comedi_device *dev, struct *comedi_subdevice *s);*/
+/* static int cb_pcidda_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_cmd *cmd); */
+/* static int cb_pcidda_ns_to_timer(unsigned int *ns,int *round); */
+
+static unsigned int cb_pcidda_serial_in(struct comedi_device *dev);
+static void cb_pcidda_serial_out(struct comedi_device *dev, unsigned int value,
 	unsigned int num_bits);
-static unsigned int cb_pcidda_read_eeprom(struct comedi_device * dev,
+static unsigned int cb_pcidda_read_eeprom(struct comedi_device *dev,
 	unsigned int address);
-static void cb_pcidda_calibrate(struct comedi_device * dev, unsigned int channel,
+static void cb_pcidda_calibrate(struct comedi_device *dev, unsigned int channel,
 	unsigned int range);
 
 /*
@@ -255,17 +264,17 @@ static void cb_pcidda_calibrate(struct comedi_device * dev, unsigned int channel
  * the device code.
  */
 static struct comedi_driver driver_cb_pcidda = {
-      driver_name:"cb_pcidda",
-      module:THIS_MODULE,
-      attach:cb_pcidda_attach,
-      detach:cb_pcidda_detach,
+	.driver_name = "cb_pcidda",
+	.module = THIS_MODULE,
+	.attach = cb_pcidda_attach,
+	.detach = cb_pcidda_detach,
 };
 
 /*
  * Attach is called by the Comedi core to configure the driver
  * for a particular board.
  */
-static int cb_pcidda_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int cb_pcidda_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	struct pci_dev *pcidev;
@@ -310,7 +319,7 @@ static int cb_pcidda_attach(struct comedi_device * dev, struct comedi_devconfig
       found:
 	devpriv->pci_dev = pcidev;
 	dev->board_ptr = cb_pcidda_boards + index;
-	// "thisboard" macro can be used from here.
+	/*  "thisboard" macro can be used from here. */
 	printk("Found %s at requested position\n", thisboard->name);
 
 	/*
@@ -353,11 +362,12 @@ static int cb_pcidda_attach(struct comedi_device * dev, struct comedi_devconfig
 	s->maxdata = (1 << thisboard->ao_bits) - 1;
 	s->range_table = thisboard->ranges;
 	s->insn_write = cb_pcidda_ao_winsn;
-//      s->subdev_flags |= SDF_CMD_READ;
-//      s->do_cmd = cb_pcidda_ai_cmd;
-//      s->do_cmdtest = cb_pcidda_ai_cmdtest;
 
-	// two 8255 digital io subdevices
+	/* s->subdev_flags |= SDF_CMD_READ; */
+	/* s->do_cmd = cb_pcidda_ai_cmd; */
+	/* s->do_cmdtest = cb_pcidda_ai_cmdtest; */
+
+	/*  two 8255 digital io subdevices */
 	s = dev->subdevices + 1;
 	subdev_8255_init(dev, s, NULL, devpriv->digitalio);
 	s = dev->subdevices + 2;
@@ -370,7 +380,7 @@ static int cb_pcidda_attach(struct comedi_device * dev, struct comedi_devconfig
 	}
 	printk("\n");
 
-	// set calibrations dacs
+	/*  set calibrations dacs */
 	for (index = 0; index < thisboard->ao_chans; index++)
 		cb_pcidda_calibrate(dev, index, devpriv->ao_range[index]);
 
@@ -385,7 +395,7 @@ static int cb_pcidda_attach(struct comedi_device * dev, struct comedi_devconfig
  * allocated by _attach().  dev->private and dev->subdevices are
  * deallocated automatically by the core.
  */
-static int cb_pcidda_detach(struct comedi_device * dev)
+static int cb_pcidda_detach(struct comedi_device *dev)
 {
 /*
  * Deallocate the I/O ports.
@@ -398,7 +408,7 @@ static int cb_pcidda_detach(struct comedi_device * dev)
 			pci_dev_put(devpriv->pci_dev);
 		}
 	}
-	// cleanup 8255
+	/*  cleanup 8255 */
 	if (dev->subdevices) {
 		subdev_8255_cleanup(dev, dev->subdevices + 1);
 		subdev_8255_cleanup(dev, dev->subdevices + 2);
@@ -413,7 +423,7 @@ static int cb_pcidda_detach(struct comedi_device * dev)
  * I will program this later... ;-)
  */
 #if 0
-static int cb_pcidda_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int cb_pcidda_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	printk("cb_pcidda_ai_cmd\n");
 	printk("subdev: %d\n", cmd->subdev);
@@ -432,8 +442,8 @@ static int cb_pcidda_ai_cmd(struct comedi_device * dev, struct comedi_subdevice
 #endif
 
 #if 0
-static int cb_pcidda_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int cb_pcidda_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	int tmp;
@@ -598,8 +608,8 @@ static int cb_pcidda_ns_to_timer(unsigned int *ns, int round)
 }
 #endif
 
-static int cb_pcidda_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int cb_pcidda_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int command;
 	unsigned int channel, range;
@@ -607,7 +617,7 @@ static int cb_pcidda_ao_winsn(struct comedi_device * dev, struct comedi_subdevic
 	channel = CR_CHAN(insn->chanspec);
 	range = CR_RANGE(insn->chanspec);
 
-	// adjust calibration dacs if range has changed
+	/*  adjust calibration dacs if range has changed */
 	if (range != devpriv->ao_range[channel])
 		cb_pcidda_calibrate(dev, channel, range);
 
@@ -647,15 +657,15 @@ static int cb_pcidda_ao_winsn(struct comedi_device * dev, struct comedi_subdevic
 	return 1;
 }
 
-// lowlevel read from eeprom
-static unsigned int cb_pcidda_serial_in(struct comedi_device * dev)
+/* lowlevel read from eeprom */
+static unsigned int cb_pcidda_serial_in(struct comedi_device *dev)
 {
 	unsigned int value = 0;
 	int i;
-	const int value_width = 16;	// number of bits wide values are
+	const int value_width = 16;	/*  number of bits wide values are */
 
 	for (i = 1; i <= value_width; i++) {
-		// read bits most significant bit first
+		/*  read bits most significant bit first */
 		if (inw_p(devpriv->dac + DACALIBRATION1) & SERIAL_OUT_BIT) {
 			value |= 1 << (value_width - i);
 		}
@@ -664,14 +674,14 @@ static unsigned int cb_pcidda_serial_in(struct comedi_device * dev)
 	return value;
 }
 
-// lowlevel write to eeprom/dac
-static void cb_pcidda_serial_out(struct comedi_device * dev, unsigned int value,
+/* lowlevel write to eeprom/dac */
+static void cb_pcidda_serial_out(struct comedi_device *dev, unsigned int value,
 	unsigned int num_bits)
 {
 	int i;
 
 	for (i = 1; i <= num_bits; i++) {
-		// send bits most significant bit first
+		/*  send bits most significant bit first */
 		if (value & (1 << (num_bits - i)))
 			devpriv->dac_cal1_bits |= SERIAL_IN_BIT;
 		else
@@ -680,136 +690,137 @@ static void cb_pcidda_serial_out(struct comedi_device * dev, unsigned int value,
 	}
 }
 
-// reads a 16 bit value from board's eeprom
-static unsigned int cb_pcidda_read_eeprom(struct comedi_device * dev,
+/* reads a 16 bit value from board's eeprom */
+static unsigned int cb_pcidda_read_eeprom(struct comedi_device *dev,
 	unsigned int address)
 {
 	unsigned int i;
 	unsigned int cal2_bits;
 	unsigned int value;
-	const int max_num_caldacs = 4;	// one caldac for every two dac channels
-	const int read_instruction = 0x6;	// bits to send to tell eeprom we want to read
+	const int max_num_caldacs = 4;	/*  one caldac for every two dac channels */
+	const int read_instruction = 0x6;	/*  bits to send to tell eeprom we want to read */
 	const int instruction_length = 3;
 	const int address_length = 8;
 
-	// send serial output stream to eeprom
+	/*  send serial output stream to eeprom */
 	cal2_bits = SELECT_EEPROM_BIT | DESELECT_REF_DAC_BIT | DUMMY_BIT;
-	// deactivate caldacs (one caldac for every two channels)
+	/*  deactivate caldacs (one caldac for every two channels) */
 	for (i = 0; i < max_num_caldacs; i++) {
 		cal2_bits |= DESELECT_CALDAC_BIT(i);
 	}
 	outw_p(cal2_bits, devpriv->dac + DACALIBRATION2);
 
-	// tell eeprom we want to read
+	/*  tell eeprom we want to read */
 	cb_pcidda_serial_out(dev, read_instruction, instruction_length);
-	// send address we want to read from
+	/*  send address we want to read from */
 	cb_pcidda_serial_out(dev, address, address_length);
 
 	value = cb_pcidda_serial_in(dev);
 
-	// deactivate eeprom
+	/*  deactivate eeprom */
 	cal2_bits &= ~SELECT_EEPROM_BIT;
 	outw_p(cal2_bits, devpriv->dac + DACALIBRATION2);
 
 	return value;
 }
 
-// writes to 8 bit calibration dacs
-static void cb_pcidda_write_caldac(struct comedi_device * dev, unsigned int caldac,
+/* writes to 8 bit calibration dacs */
+static void cb_pcidda_write_caldac(struct comedi_device *dev, unsigned int caldac,
 	unsigned int channel, unsigned int value)
 {
 	unsigned int cal2_bits;
 	unsigned int i;
-	const int num_channel_bits = 3;	// caldacs use 3 bit channel specification
-	const int num_caldac_bits = 8;	// 8 bit calibration dacs
-	const int max_num_caldacs = 4;	// one caldac for every two dac channels
+	const int num_channel_bits = 3;	/*  caldacs use 3 bit channel specification */
+	const int num_caldac_bits = 8;	/*  8 bit calibration dacs */
+	const int max_num_caldacs = 4;	/*  one caldac for every two dac channels */
 
 	/* write 3 bit channel */
 	cb_pcidda_serial_out(dev, channel, num_channel_bits);
-	// write 8 bit caldac value
+	/*  write 8 bit caldac value */
 	cb_pcidda_serial_out(dev, value, num_caldac_bits);
 
-	// latch stream into appropriate caldac
-	// deselect reference dac
+/*
+* latch stream into appropriate caldac deselect reference dac
+*/
 	cal2_bits = DESELECT_REF_DAC_BIT | DUMMY_BIT;
-	// deactivate caldacs (one caldac for every two channels)
+	/*  deactivate caldacs (one caldac for every two channels) */
 	for (i = 0; i < max_num_caldacs; i++) {
 		cal2_bits |= DESELECT_CALDAC_BIT(i);
 	}
-	// activate the caldac we want
+	/*  activate the caldac we want */
 	cal2_bits &= ~DESELECT_CALDAC_BIT(caldac);
 	outw_p(cal2_bits, devpriv->dac + DACALIBRATION2);
-	// deactivate caldac
+	/*  deactivate caldac */
 	cal2_bits |= DESELECT_CALDAC_BIT(caldac);
 	outw_p(cal2_bits, devpriv->dac + DACALIBRATION2);
 }
 
-// returns caldac that calibrates given analog out channel
+/* returns caldac that calibrates given analog out channel */
 static unsigned int caldac_number(unsigned int channel)
 {
 	return channel / 2;
 }
 
-// returns caldac channel that provides fine gain for given ao channel
+/* returns caldac channel that provides fine gain for given ao channel */
 static unsigned int fine_gain_channel(unsigned int ao_channel)
 {
 	return 4 * (ao_channel % 2);
 }
 
-// returns caldac channel that provides coarse gain for given ao channel
+/* returns caldac channel that provides coarse gain for given ao channel */
 static unsigned int coarse_gain_channel(unsigned int ao_channel)
 {
 	return 1 + 4 * (ao_channel % 2);
 }
 
-// returns caldac channel that provides coarse offset for given ao channel
+/* returns caldac channel that provides coarse offset for given ao channel */
 static unsigned int coarse_offset_channel(unsigned int ao_channel)
 {
 	return 2 + 4 * (ao_channel % 2);
 }
 
-// returns caldac channel that provides fine offset for given ao channel
+/* returns caldac channel that provides fine offset for given ao channel */
 static unsigned int fine_offset_channel(unsigned int ao_channel)
 {
 	return 3 + 4 * (ao_channel % 2);
 }
 
-// returns eeprom address that provides offset for given ao channel and range
+/* returns eeprom address that provides offset for given ao channel and range */
 static unsigned int offset_eeprom_address(unsigned int ao_channel,
 	unsigned int range)
 {
 	return 0x7 + 2 * range + 12 * ao_channel;
 }
 
-// returns eeprom address that provides gain calibration for given ao channel and range
+/* returns eeprom address that provides gain calibration for given ao channel and range */
 static unsigned int gain_eeprom_address(unsigned int ao_channel,
 	unsigned int range)
 {
 	return 0x8 + 2 * range + 12 * ao_channel;
 }
 
-// returns upper byte of eeprom entry, which gives the coarse adjustment values
+/* returns upper byte of eeprom entry, which gives the coarse adjustment values */
 static unsigned int eeprom_coarse_byte(unsigned int word)
 {
 	return (word >> 8) & 0xff;
 }
 
-// returns lower byte of eeprom entry, which gives the fine adjustment values
+/* returns lower byte of eeprom entry, which gives the fine adjustment values */
 static unsigned int eeprom_fine_byte(unsigned int word)
 {
 	return word & 0xff;
 }
 
-// set caldacs to eeprom values for given channel and range
-static void cb_pcidda_calibrate(struct comedi_device * dev, unsigned int channel,
+/* set caldacs to eeprom values for given channel and range */
+static void cb_pcidda_calibrate(struct comedi_device *dev, unsigned int channel,
 	unsigned int range)
 {
 	unsigned int coarse_offset, fine_offset, coarse_gain, fine_gain;
 
-	// remember range so we can tell when we need to readjust calibration
+	/*  remember range so we can tell when we need to readjust calibration */
 	devpriv->ao_range[channel] = range;
 
-	// get values from eeprom data
+	/*  get values from eeprom data */
 	coarse_offset =
 		eeprom_coarse_byte(devpriv->
 		eeprom_data[offset_eeprom_address(channel, range)]);
@@ -823,7 +834,7 @@ static void cb_pcidda_calibrate(struct comedi_device * dev, unsigned int channel
 		eeprom_fine_byte(devpriv->
 		eeprom_data[gain_eeprom_address(channel, range)]);
 
-	// set caldacs
+	/*  set caldacs */
 	cb_pcidda_write_caldac(dev, caldac_number(channel),
 		coarse_offset_channel(channel), coarse_offset);
 	cb_pcidda_write_caldac(dev, caldac_number(channel),
diff --git a/drivers/staging/comedi/drivers/cb_pcidio.c b/drivers/staging/comedi/drivers/cb_pcidio.c
index 71a4b1482e3..dc701273167 100644
--- a/drivers/staging/comedi/drivers/cb_pcidio.c
+++ b/drivers/staging/comedi/drivers/cb_pcidio.c
@@ -53,32 +53,32 @@ Passing a zero for an option is the same as leaving it unspecified.
  * Some drivers use arrays such as this, other do not.
  */
 struct pcidio_board {
-	const char *name;	// anme of the board
-	int n_8255;		// number of 8255 chips on board
+	const char *name;	/*  anme of the board */
+	int n_8255;		/*  number of 8255 chips on board */
 
-	// indices of base address regions
+	/*  indices of base address regions */
 	int pcicontroler_badrindex;
 	int dioregs_badrindex;
 };
 
 static const struct pcidio_board pcidio_boards[] = {
 	{
-	      name:	"pci-dio24",
-	      n_8255:	1,
-	      pcicontroler_badrindex:1,
-	      dioregs_badrindex:2,
+	.name = "pci-dio24",
+	.n_8255 = 1,
+	.pcicontroler_badrindex = 1,
+	.dioregs_badrindex = 2,
 		},
 	{
-	      name:	"pci-dio24h",
-	      n_8255:	1,
-	      pcicontroler_badrindex:1,
-	      dioregs_badrindex:2,
+	.name = "pci-dio24h",
+	.n_8255 = 1,
+	.pcicontroler_badrindex = 1,
+	.dioregs_badrindex = 2,
 		},
 	{
-	      name:	"pci-dio48h",
-	      n_8255:	2,
-	      pcicontroler_badrindex:0,
-	      dioregs_badrindex:1,
+	.name = "pci-dio48h",
+	.n_8255 = 2,
+	.pcicontroler_badrindex = 0,
+	.dioregs_badrindex = 1,
 		},
 };
 
@@ -104,7 +104,7 @@ MODULE_DEVICE_TABLE(pci, pcidio_pci_table);
    several hardware drivers keep similar information in this structure,
    feel free to suggest moving the variable to the struct comedi_device struct.  */
 struct pcidio_private {
-	int data;		// curently unused
+	int data;		/*  curently unused */
 
 	/* would be useful for a PCI device */
 	struct pci_dev *pci_dev;
@@ -112,7 +112,7 @@ struct pcidio_private {
 	/* used for DO readback, curently unused */
 	unsigned int do_readback[4];	/* up to 4 unsigned int suffice to hold 96 bits for PCI-DIO96 */
 
-	unsigned long dio_reg_base;	// address of port A of the first 8255 chip on board
+	unsigned long dio_reg_base;	/*  address of port A of the first 8255 chip on board */
 };
 
 /*
@@ -127,15 +127,17 @@ struct pcidio_private {
  * the board, and also about the kernel module that contains
  * the device code.
  */
-static int pcidio_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int pcidio_detach(struct comedi_device * dev);
+static int pcidio_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int pcidio_detach(struct comedi_device *dev);
 static struct comedi_driver driver_cb_pcidio = {
-      driver_name:"cb_pcidio",
-      module:THIS_MODULE,
-      attach:pcidio_attach,
-      detach:pcidio_detach,
+	.driver_name = "cb_pcidio",
+	.module = THIS_MODULE,
+	.attach = pcidio_attach,
+	.detach = pcidio_detach,
+
 /* It is not necessary to implement the following members if you are
  * writing a driver for a ISA PnP or PCI card */
+
 	/* Most drivers will support multiple types of boards by
 	 * having an array of board structures.  These were defined
 	 * in pcidio_boards[] above.  Note that the element 'name'
@@ -152,10 +154,15 @@ static struct comedi_driver driver_cb_pcidio = {
 	 * the type of board in software.  ISA PnP, PCI, and PCMCIA
 	 * devices are such boards.
 	 */
-// The following fields should NOT be initialized if you are dealing with PCI devices
-//      board_name:     pcidio_boards,
-//      offset:         sizeof(struct pcidio_board),
-//      num_names:      sizeof(pcidio_boards) / sizeof(struct pcidio_board),
+
+/* The following fields should NOT be initialized if you are dealing
+ * with PCI devices
+ *
+ *	.board_name = pcidio_boards,
+ *	.offset = sizeof(struct pcidio_board),
+ *	.num_names = sizeof(pcidio_boards) / sizeof(structpcidio_board),
+ */
+
 };
 
 /*------------------------------- FUNCTIONS -----------------------------------*/
@@ -166,7 +173,7 @@ static struct comedi_driver driver_cb_pcidio = {
  * in the driver structure, dev->board_ptr contains that
  * address.
  */
-static int pcidio_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int pcidio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct pci_dev *pcidev = NULL;
 	int index;
@@ -192,19 +199,19 @@ static int pcidio_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	for (pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
 		pcidev != NULL;
 		pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pcidev)) {
-		// is it not a computer boards card?
+		/*  is it not a computer boards card? */
 		if (pcidev->vendor != PCI_VENDOR_ID_CB)
 			continue;
-		// loop through cards supported by this driver
+		/*  loop through cards supported by this driver */
 		for (index = 0;
-			index < sizeof pcidio_boards / sizeof(struct pcidio_board);
+			index < ARRAY_SIZE(pcidio_boards);
 			index++) {
 			if (pcidio_pci_table[index].device != pcidev->device)
 				continue;
 
-			// was a particular bus/slot requested?
+			/*  was a particular bus/slot requested? */
 			if (it->options[0] || it->options[1]) {
-				// are we on the wrong bus/slot?
+				/*  are we on the wrong bus/slot? */
 				if (pcidev->bus->number != it->options[0] ||
 					PCI_SLOT(pcidev->devfn) !=
 					it->options[1]) {
@@ -267,7 +274,7 @@ static int pcidio_attach(struct comedi_device * dev, struct comedi_devconfig * i
  * allocated by _attach().  dev->private and dev->subdevices are
  * deallocated automatically by the core.
  */
-static int pcidio_detach(struct comedi_device * dev)
+static int pcidio_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: cb_pcidio: remove\n", dev->minor);
 	if (devpriv) {
diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/staging/comedi/drivers/cb_pcimdas.c
index af705fa092c..57d250c73ab 100644
--- a/drivers/staging/comedi/drivers/cb_pcimdas.c
+++ b/drivers/staging/comedi/drivers/cb_pcimdas.c
@@ -43,29 +43,30 @@ See http://www.measurementcomputing.com/PDFManuals/pcim-das1602_16.pdf for more
 #include "../comedidev.h"
 
 #include <linux/delay.h>
+#include <linux/interrupt.h>
 
 #include "comedi_pci.h"
 #include "plx9052.h"
 #include "8255.h"
 
-//#define CBPCIMDAS_DEBUG
+/* #define CBPCIMDAS_DEBUG */
 #undef CBPCIMDAS_DEBUG
 
 /* Registers for the PCIM-DAS1602/16 */
 
-// sizes of io regions (bytes)
-#define BADR0_SIZE 2		//??
+/* sizes of io regions (bytes) */
+#define BADR0_SIZE 2		/* ?? */
 #define BADR1_SIZE 4
 #define BADR2_SIZE 6
 #define BADR3_SIZE 16
 #define BADR4_SIZE 4
 
-//DAC Offsets
+/* DAC Offsets */
 #define ADC_TRIG 0
 #define DAC0_OFFSET 2
 #define DAC1_OFFSET 4
 
-//AI and Counter Constants
+/* AI and Counter Constants */
 #define MUX_LIMITS 0
 #define MAIN_CONN_DIO 1
 #define ADC_STAT 2
@@ -86,37 +87,37 @@ See http://www.measurementcomputing.com/PDFManuals/pcim-das1602_16.pdf for more
 struct cb_pcimdas_board {
 	const char *name;
 	unsigned short device_id;
-	int ai_se_chans;	// Inputs in single-ended mode
-	int ai_diff_chans;	// Inputs in differential mode
-	int ai_bits;		// analog input resolution
-	int ai_speed;		// fastest conversion period in ns
-	int ao_nchan;		// number of analog out channels
-	int ao_bits;		// analogue output resolution
-	int has_ao_fifo;	// analog output has fifo
-	int ao_scan_speed;	// analog output speed for 1602 series (for a scan, not conversion)
-	int fifo_size;		// number of samples fifo can hold
-	int dio_bits;		// number of dio bits
-	int has_dio;		// has DIO
+	int ai_se_chans;	/*  Inputs in single-ended mode */
+	int ai_diff_chans;	/*  Inputs in differential mode */
+	int ai_bits;		/*  analog input resolution */
+	int ai_speed;		/*  fastest conversion period in ns */
+	int ao_nchan;		/*  number of analog out channels */
+	int ao_bits;		/*  analogue output resolution */
+	int has_ao_fifo;	/*  analog output has fifo */
+	int ao_scan_speed;	/*  analog output speed for 1602 series (for a scan, not conversion) */
+	int fifo_size;		/*  number of samples fifo can hold */
+	int dio_bits;		/*  number of dio bits */
+	int has_dio;		/*  has DIO */
 	const struct comedi_lrange *ranges;
 };
 
 static const struct cb_pcimdas_board cb_pcimdas_boards[] = {
 	{
-	      name:	"PCIM-DAS1602/16",
-	      device_id:0x56,
-	      ai_se_chans:16,
-	      ai_diff_chans:8,
-	      ai_bits:	16,
-	      ai_speed:10000,	//??
-	      ao_nchan:2,
-	      ao_bits:	12,
-	      has_ao_fifo:0,	//??
-	      ao_scan_speed:10000,
-			//??
-	      fifo_size:1024,
-	      dio_bits:24,
-	      has_dio:	1,
-//              ranges:         &cb_pcimdas_ranges,
+	.name = "PCIM-DAS1602/16",
+	.device_id = 0x56,
+	.ai_se_chans = 16,
+	.ai_diff_chans = 8,
+	.ai_bits = 16,
+	.ai_speed = 10000,	/* ?? */
+	.ao_nchan = 2,
+	.ao_bits = 12,
+	.has_ao_fifo = 0,	/* ?? */
+	.ao_scan_speed = 10000,
+			/* ?? */
+	.fifo_size = 1024,
+	.dio_bits = 24,
+	.has_dio = 1,
+/*	.ranges = &cb_pcimdas_ranges, */
 		},
 };
 
@@ -129,7 +130,7 @@ static DEFINE_PCI_DEVICE_TABLE(cb_pcimdas_pci_table) = {
 
 MODULE_DEVICE_TABLE(pci, cb_pcimdas_pci_table);
 
-#define N_BOARDS 1		// Max number of boards supported
+#define N_BOARDS 1		/*  Max number of boards supported */
 
 /*
  * Useful for shorthand access to the particular board structure
@@ -142,10 +143,10 @@ MODULE_DEVICE_TABLE(pci, cb_pcimdas_pci_table);
 struct cb_pcimdas_private {
 	int data;
 
-	// would be useful for a PCI device
+	/*  would be useful for a PCI device */
 	struct pci_dev *pci_dev;
 
-	//base addresses
+	/* base addresses */
 	unsigned long BADR0;
 	unsigned long BADR1;
 	unsigned long BADR2;
@@ -155,11 +156,11 @@ struct cb_pcimdas_private {
 	/* Used for AO readback */
 	unsigned int ao_readback[2];
 
-	// Used for DIO
-	unsigned short int port_a;	// copy of BADR4+0
-	unsigned short int port_b;	// copy of BADR4+1
-	unsigned short int port_c;	// copy of BADR4+2
-	unsigned short int dio_mode;	// copy of BADR4+3
+	/*  Used for DIO */
+	unsigned short int port_a;	/*  copy of BADR4+0 */
+	unsigned short int port_b;	/*  copy of BADR4+1 */
+	unsigned short int port_c;	/*  copy of BADR4+2 */
+	unsigned short int dio_mode;	/*  copy of BADR4+3 */
 
 };
 
@@ -175,21 +176,21 @@ struct cb_pcimdas_private {
  * the board, and also about the kernel module that contains
  * the device code.
  */
-static int cb_pcimdas_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int cb_pcimdas_detach(struct comedi_device * dev);
+static int cb_pcimdas_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int cb_pcimdas_detach(struct comedi_device *dev);
 static struct comedi_driver driver_cb_pcimdas = {
-      driver_name:"cb_pcimdas",
-      module:THIS_MODULE,
-      attach:cb_pcimdas_attach,
-      detach:cb_pcimdas_detach,
+	.driver_name = "cb_pcimdas",
+	.module = THIS_MODULE,
+	.attach = cb_pcimdas_attach,
+	.detach = cb_pcimdas_detach,
 };
 
-static int cb_pcimdas_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int cb_pcimdas_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int cb_pcimdas_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int cb_pcimdas_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int cb_pcimdas_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int cb_pcimdas_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
 /*
  * Attach is called by the Comedi core to configure the driver
@@ -197,12 +198,12 @@ static int cb_pcimdas_ao_rinsn(struct comedi_device * dev, struct comedi_subdevi
  * in the driver structure, dev->board_ptr contains that
  * address.
  */
-static int cb_pcimdas_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int cb_pcimdas_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	struct pci_dev *pcidev;
 	int index;
-	//int i;
+	/* int i; */
 
 	printk("comedi%d: cb_pcimdas: ", dev->minor);
 
@@ -220,17 +221,17 @@ static int cb_pcimdas_attach(struct comedi_device * dev, struct comedi_devconfig
 	for (pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
 		pcidev != NULL;
 		pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pcidev)) {
-		// is it not a computer boards card?
+		/*  is it not a computer boards card? */
 		if (pcidev->vendor != PCI_VENDOR_ID_COMPUTERBOARDS)
 			continue;
-		// loop through cards supported by this driver
+		/*  loop through cards supported by this driver */
 		for (index = 0; index < N_BOARDS; index++) {
 			if (cb_pcimdas_boards[index].device_id !=
 				pcidev->device)
 				continue;
-			// was a particular bus/slot requested?
+			/*  was a particular bus/slot requested? */
 			if (it->options[0] || it->options[1]) {
-				// are we on the wrong bus/slot?
+				/*  are we on the wrong bus/slot? */
 				if (pcidev->bus->number != it->options[0] ||
 					PCI_SLOT(pcidev->devfn) !=
 					it->options[1]) {
@@ -252,7 +253,7 @@ static int cb_pcimdas_attach(struct comedi_device * dev, struct comedi_devconfig
 	printk("Found %s on bus %i, slot %i\n", cb_pcimdas_boards[index].name,
 		pcidev->bus->number, PCI_SLOT(pcidev->devfn));
 
-	// Warn about non-tested features
+	/*  Warn about non-tested features */
 	switch (thisboard->device_id) {
 	case 0x56:
 		break;
@@ -280,16 +281,16 @@ static int cb_pcimdas_attach(struct comedi_device * dev, struct comedi_devconfig
 	printk("devpriv->BADR4 = 0x%lx\n", devpriv->BADR4);
 #endif
 
-// Dont support IRQ yet
-//      // get irq
-//      if(comedi_request_irq(devpriv->pci_dev->irq, cb_pcimdas_interrupt, IRQF_SHARED, "cb_pcimdas", dev ))
-//      {
-//              printk(" unable to allocate irq %u\n", devpriv->pci_dev->irq);
-//              return -EINVAL;
-//      }
-//      dev->irq = devpriv->pci_dev->irq;
+/* Dont support IRQ yet */
+/*  get irq */
+/* if(request_irq(devpriv->pci_dev->irq, cb_pcimdas_interrupt, IRQF_SHARED, "cb_pcimdas", dev )) */
+/* { */
+/* printk(" unable to allocate irq %u\n", devpriv->pci_dev->irq); */
+/* return -EINVAL; */
+/* } */
+/* dev->irq = devpriv->pci_dev->irq; */
 
-	//Initialize dev->board_name
+	/* Initialize dev->board_name */
 	dev->board_name = thisboard->name;
 
 /*
@@ -300,24 +301,24 @@ static int cb_pcimdas_attach(struct comedi_device * dev, struct comedi_devconfig
 		return -ENOMEM;
 
 	s = dev->subdevices + 0;
-	//dev->read_subdev=s;
-	// analog input subdevice
+	/* dev->read_subdev=s; */
+	/*  analog input subdevice */
 	s->type = COMEDI_SUBD_AI;
 	s->subdev_flags = SDF_READABLE | SDF_GROUND;
 	s->n_chan = thisboard->ai_se_chans;
 	s->maxdata = (1 << thisboard->ai_bits) - 1;
 	s->range_table = &range_unknown;
-	s->len_chanlist = 1;	// This is the maximum chanlist length that
-	// the board can handle
+	s->len_chanlist = 1;	/*  This is the maximum chanlist length that */
+	/*  the board can handle */
 	s->insn_read = cb_pcimdas_ai_rinsn;
 
 	s = dev->subdevices + 1;
-	// analog output subdevice
+	/*  analog output subdevice */
 	s->type = COMEDI_SUBD_AO;
 	s->subdev_flags = SDF_WRITABLE;
 	s->n_chan = thisboard->ao_nchan;
 	s->maxdata = 1 << thisboard->ao_bits;
-	s->range_table = &range_unknown;	//ranges are hardware settable, but not software readable.
+	s->range_table = &range_unknown;	/* ranges are hardware settable, but not software readable. */
 	s->insn_write = &cb_pcimdas_ao_winsn;
 	s->insn_read = &cb_pcimdas_ao_rinsn;
 
@@ -342,7 +343,7 @@ static int cb_pcimdas_attach(struct comedi_device * dev, struct comedi_devconfig
  * allocated by _attach().  dev->private and dev->subdevices are
  * deallocated automatically by the core.
  */
-static int cb_pcimdas_detach(struct comedi_device * dev)
+static int cb_pcimdas_detach(struct comedi_device *dev)
 {
 #ifdef CBPCIMDAS_DEBUG
 	if (devpriv) {
@@ -355,7 +356,7 @@ static int cb_pcimdas_detach(struct comedi_device * dev)
 #endif
 	printk("comedi%d: cb_pcimdas: remove\n", dev->minor);
 	if (dev->irq)
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 	if (devpriv) {
 		if (devpriv->pci_dev) {
 			if (devpriv->BADR0) {
@@ -372,8 +373,8 @@ static int cb_pcimdas_detach(struct comedi_device * dev)
  * "instructions" read/write data in "one-shot" or "software-triggered"
  * mode.
  */
-static int cb_pcimdas_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int cb_pcimdas_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n, i;
 	unsigned int d;
@@ -382,27 +383,27 @@ static int cb_pcimdas_ai_rinsn(struct comedi_device * dev, struct comedi_subdevi
 	unsigned short chanlims;
 	int maxchans;
 
-	// only support sw initiated reads from a single channel
+	/*  only support sw initiated reads from a single channel */
 
-	//check channel number
-	if ((inb(devpriv->BADR3 + 2) & 0x20) == 0)	//differential mode
+	/* check channel number */
+	if ((inb(devpriv->BADR3 + 2) & 0x20) == 0)	/* differential mode */
 		maxchans = thisboard->ai_diff_chans;
 	else
 		maxchans = thisboard->ai_se_chans;
 
 	if (chan > (maxchans - 1))
-		return -ETIMEDOUT;	//*** Wrong error code. Fixme.
+		return -ETIMEDOUT;	/* *** Wrong error code. Fixme. */
 
-	//configure for sw initiated read
+	/* configure for sw initiated read */
 	d = inb(devpriv->BADR3 + 5);
-	if ((d & 0x03) > 0) {	//only reset if needed.
+	if ((d & 0x03) > 0) {	/* only reset if needed. */
 		d = d & 0xfd;
 		outb(d, devpriv->BADR3 + 5);
 	}
-	outb(0x01, devpriv->BADR3 + 6);	//set bursting off, conversions on
-	outb(0x00, devpriv->BADR3 + 7);	//set range to 10V. UP/BP is controlled by a switch on the board
+	outb(0x01, devpriv->BADR3 + 6);	/* set bursting off, conversions on */
+	outb(0x00, devpriv->BADR3 + 7);	/* set range to 10V. UP/BP is controlled by a switch on the board */
 
-	// write channel limits to multiplexer, set Low (bits 0-3) and High (bits 4-7) channels to chan.
+	/*  write channel limits to multiplexer, set Low (bits 0-3) and High (bits 4-7) channels to chan. */
 	chanlims = chan | (chan << 4);
 	outb(chanlims, devpriv->BADR3 + 0);
 
@@ -411,8 +412,8 @@ static int cb_pcimdas_ai_rinsn(struct comedi_device * dev, struct comedi_subdevi
 		/* trigger conversion */
 		outw(0, devpriv->BADR2 + 0);
 
-#define TIMEOUT 1000		//typically takes 5 loops on a lightly loaded Pentium 100MHz,
-		//this is likely to be 100 loops on a 2GHz machine, so set 1000 as the limit.
+#define TIMEOUT 1000		/* typically takes 5 loops on a lightly loaded Pentium 100MHz, */
+		/* this is likely to be 100 loops on a 2GHz machine, so set 1000 as the limit. */
 
 		/* wait for conversion to end */
 		for (i = 0; i < TIMEOUT; i++) {
@@ -428,7 +429,7 @@ static int cb_pcimdas_ai_rinsn(struct comedi_device * dev, struct comedi_subdevi
 		d = inw(devpriv->BADR2 + 0);
 
 		/* mangle the data as necessary */
-		//d ^= 1<<(thisboard->ai_bits-1); // 16 bit data from ADC, so no mangle needed.
+		/* d ^= 1<<(thisboard->ai_bits-1); // 16 bit data from ADC, so no mangle needed. */
 
 		data[n] = d;
 	}
@@ -437,8 +438,8 @@ static int cb_pcimdas_ai_rinsn(struct comedi_device * dev, struct comedi_subdevi
 	return n;
 }
 
-static int cb_pcimdas_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int cb_pcimdas_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
@@ -465,8 +466,8 @@ static int cb_pcimdas_ao_winsn(struct comedi_device * dev, struct comedi_subdevi
 
 /* AO subdevices should have a read insn as well as a write insn.
  * Usually this means copying a value stored in devpriv. */
-static int cb_pcimdas_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int cb_pcimdas_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
diff --git a/drivers/staging/comedi/drivers/cb_pcimdda.c b/drivers/staging/comedi/drivers/cb_pcimdda.c
index e4c5b460fbd..57bb1182480 100644
--- a/drivers/staging/comedi/drivers/cb_pcimdda.c
+++ b/drivers/staging/comedi/drivers/cb_pcimdda.c
@@ -118,15 +118,15 @@ enum DIO_METHODS {
 
 static const struct board_struct boards[] = {
 	{
-	      name:	"cb_pcimdda06-16",
-	      device_id:PCI_ID_PCIM_DDA06_16,
-	      ao_chans:6,
-	      ao_bits:	16,
-	      dio_chans:24,
-	      dio_method:DIO_8255,
-	      dio_offset:12,
-	      regs_badrindex:3,
-	      reg_sz:	16,
+	.name = "cb_pcimdda06-16",
+	.device_id = PCI_ID_PCIM_DDA06_16,
+	.ao_chans = 6,
+	.ao_bits = 16,
+	.dio_chans = 24,
+	.dio_method = DIO_8255,
+	.dio_offset = 12,
+	.regs_badrindex = 3,
+	.reg_sz = 16,
 		}
 };
 
@@ -135,8 +135,6 @@ static const struct board_struct boards[] = {
  */
 #define thisboard    ((const struct board_struct *)dev->board_ptr)
 
-/* Number of boards in boards[] */
-#define N_BOARDS	(sizeof(boards) / sizeof(struct board_struct))
 #define REG_SZ (thisboard->reg_sz)
 #define REGS_BADRINDEX (thisboard->regs_badrindex)
 
@@ -181,13 +179,13 @@ struct board_private_struct {
  * the board, and also about the kernel module that contains
  * the device code.
  */
-static int attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int detach(struct comedi_device * dev);
+static int attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int detach(struct comedi_device *dev);
 static struct comedi_driver cb_pcimdda_driver = {
-      driver_name:"cb_pcimdda",
-      module:THIS_MODULE,
-      attach:attach,
-      detach:detach,
+	.driver_name = "cb_pcimdda",
+	.module = THIS_MODULE,
+	.attach = attach,
+	.detach = detach,
 };
 
 MODULE_AUTHOR("Calin A. Culianu <calin@rtlab.org>");
@@ -197,10 +195,10 @@ MODULE_DESCRIPTION("Comedi low-level driver for the Computerboards PCIM-DDA "
 MODULE_LICENSE("GPL");
 COMEDI_PCI_INITCLEANUP_NOMODULE(cb_pcimdda_driver, pci_table);
 
-static int ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
 /*---------------------------------------------------------------------------
   HELPER FUNCTION DECLARATIONS
@@ -209,7 +207,7 @@ static int ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
 /* returns a maxdata value for a given n_bits */
 static inline unsigned int figure_out_maxdata(int bits)
 {
-	return (((unsigned int) 1 << bits) - 1);
+	return ((unsigned int) 1 << bits) - 1;
 }
 
 /*
@@ -226,7 +224,7 @@ static inline unsigned int figure_out_maxdata(int bits)
  *
  *  Otherwise, returns a -errno on error
  */
-static int probe(struct comedi_device * dev, const struct comedi_devconfig * it);
+static int probe(struct comedi_device *dev, const struct comedi_devconfig *it);
 
 /*---------------------------------------------------------------------------
   FUNCTION DEFINITIONS
@@ -238,7 +236,7 @@ static int probe(struct comedi_device * dev, const struct comedi_devconfig * it)
  * in the driver structure, dev->board_ptr contains that
  * address.
  */
-static int attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	int err;
@@ -257,7 +255,8 @@ static int attach(struct comedi_device * dev, struct comedi_devconfig * it)
  * it is, this is the place to do it.  Otherwise, dev->board_ptr
  * should already be initialized.
  */
-	if ((err = probe(dev, it)))
+	err = probe(dev, it);
+	if (err)
 		return err;
 
 /* Output some info */
@@ -326,7 +325,7 @@ static int attach(struct comedi_device * dev, struct comedi_devconfig * it)
  * allocated by _attach().  dev->private and dev->subdevices are
  * deallocated automatically by the core.
  */
-static int detach(struct comedi_device * dev)
+static int detach(struct comedi_device *dev)
 {
 	if (devpriv) {
 
@@ -352,8 +351,8 @@ static int detach(struct comedi_device * dev)
 	return 0;
 }
 
-static int ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
@@ -391,8 +390,8 @@ static int ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
    all AO channels update simultaneously.  This is useful for some control
    applications, I would imagine.
 */
-static int ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
@@ -425,7 +424,7 @@ static int ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
  *
  *  Otherwise, returns a -errno on error
  */
-static int probe(struct comedi_device * dev, const struct comedi_devconfig * it)
+static int probe(struct comedi_device *dev, const struct comedi_devconfig *it)
 {
 	struct pci_dev *pcidev;
 	int index;
@@ -434,16 +433,16 @@ static int probe(struct comedi_device * dev, const struct comedi_devconfig * it)
 	for (pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
 		pcidev != NULL;
 		pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pcidev)) {
-		// is it not a computer boards card?
+		/*  is it not a computer boards card? */
 		if (pcidev->vendor != PCI_VENDOR_ID_COMPUTERBOARDS)
 			continue;
-		// loop through cards supported by this driver
-		for (index = 0; index < N_BOARDS; index++) {
+		/*  loop through cards supported by this driver */
+		for (index = 0; index < ARRAY_SIZE(boards); index++) {
 			if (boards[index].device_id != pcidev->device)
 				continue;
-			// was a particular bus/slot requested?
+			/*  was a particular bus/slot requested? */
 			if (it->options[0] || it->options[1]) {
-				// are we on the wrong bus/slot?
+				/*  are we on the wrong bus/slot? */
 				if (pcidev->bus->number != it->options[0] ||
 					PCI_SLOT(pcidev->devfn) !=
 					it->options[1]) {
diff --git a/drivers/staging/comedi/drivers/comedi_bond.c b/drivers/staging/comedi/drivers/comedi_bond.c
index 1ee489864d3..45cd41f7fd2 100644
--- a/drivers/staging/comedi/drivers/comedi_bond.c
+++ b/drivers/staging/comedi/drivers/comedi_bond.c
@@ -210,7 +210,7 @@ static struct comedi_driver driver_bonding = {
 	 */
       .board_name =	&bondingBoards[0].name,
       .offset =		sizeof(struct BondingBoard),
-      .num_names =	sizeof(bondingBoards) / sizeof(struct BondingBoard),
+      .num_names =	ARRAY_SIZE(bondingBoards),
 };
 
 static int bonding_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
diff --git a/drivers/staging/comedi/drivers/comedi_fc.c b/drivers/staging/comedi/drivers/comedi_fc.c
index 9fa4cdc84d4..8ab8e733afb 100644
--- a/drivers/staging/comedi/drivers/comedi_fc.c
+++ b/drivers/staging/comedi/drivers/comedi_fc.c
@@ -53,7 +53,7 @@ unsigned int cfc_write_array_to_buffer(struct comedi_subdevice *subd, void *data
 
 	retval = comedi_buf_write_alloc(async, num_bytes);
 	if (retval != num_bytes) {
-		rt_printk("comedi: buffer overrun\n");
+		printk("comedi: buffer overrun\n");
 		async->events |= COMEDI_CB_OVERFLOW;
 		return 0;
 	}
diff --git a/drivers/staging/comedi/drivers/comedi_parport.c b/drivers/staging/comedi/drivers/comedi_parport.c
index a23339155ff..f42897de640 100644
--- a/drivers/staging/comedi/drivers/comedi_parport.c
+++ b/drivers/staging/comedi/drivers/comedi_parport.c
@@ -82,6 +82,7 @@ pin, which can be used to wake up tasks.
  */
 
 #include "../comedidev.h"
+#include <linux/interrupt.h>
 #include <linux/ioport.h>
 
 #define PARPORT_SIZE 3
@@ -274,7 +275,7 @@ static int parport_intr_cancel(struct comedi_device *dev, struct comedi_subdevic
 	return 0;
 }
 
-static irqreturn_t parport_interrupt(int irq, void *d PT_REGS_ARG)
+static irqreturn_t parport_interrupt(int irq, void *d)
 {
 	struct comedi_device *dev = d;
 	struct comedi_subdevice *s = dev->subdevices + 3;
@@ -309,8 +310,8 @@ static int parport_attach(struct comedi_device *dev, struct comedi_devconfig *it
 	irq = it->options[1];
 	if (irq) {
 		printk(" irq=%u", irq);
-		ret = comedi_request_irq(irq, parport_interrupt, 0,
-			"comedi_parport", dev);
+		ret = request_irq(irq, parport_interrupt, 0, "comedi_parport",
+				  dev);
 		if (ret < 0) {
 			printk(" irq not available\n");
 			return -EINVAL;
@@ -384,7 +385,7 @@ static int parport_detach(struct comedi_device *dev)
 		release_region(dev->iobase, PARPORT_SIZE);
 
 	if (dev->irq)
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 
 	return 0;
 }
diff --git a/drivers/staging/comedi/drivers/comedi_rt_timer.c b/drivers/staging/comedi/drivers/comedi_rt_timer.c
deleted file mode 100644
index f40c8cffd4b..00000000000
--- a/drivers/staging/comedi/drivers/comedi_rt_timer.c
+++ /dev/null
@@ -1,728 +0,0 @@
-/*
-    comedi/drivers/comedi_rt_timer.c
-    virtual driver for using RTL timing sources
-
-    Authors: David A. Schleef, Frank M. Hess
-
-    COMEDI - Linux Control and Measurement Device Interface
-    Copyright (C) 1999,2001 David A. Schleef <ds@schleef.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-**************************************************************************
-*/
-/*
-Driver: comedi_rt_timer
-Description: Command emulator using real-time tasks
-Author: ds, fmhess
-Devices:
-Status: works
-
-This driver requires RTAI or RTLinux to work correctly.  It doesn't
-actually drive hardware directly, but calls other drivers and uses
-a real-time task to emulate commands for drivers and devices that
-are incapable of native commands.  Thus, you can get accurately
-timed I/O on any device.
-
-Since the timing is all done in software, sampling jitter is much
-higher than with a device that has an on-board timer, and maximum
-sample rate is much lower.
-
-Configuration options:
-  [0] - minor number of device you wish to emulate commands for
-  [1] - subdevice number you wish to emulate commands for
-*/
-/*
-TODO:
-	Support for digital io commands could be added, except I can't see why
-		anyone would want to use them
-	What happens if device we are emulating for is de-configured?
-*/
-
-#include "../comedidev.h"
-#include "../comedilib.h"
-
-#include "comedi_fc.h"
-
-#ifdef CONFIG_COMEDI_RTL_V1
-#include <rtl_sched.h>
-#include <asm/rt_irq.h>
-#endif
-#ifdef CONFIG_COMEDI_RTL
-#include <rtl.h>
-#include <rtl_sched.h>
-#include <rtl_compat.h>
-#include <asm/div64.h>
-
-#ifndef RTLINUX_VERSION_CODE
-#define RTLINUX_VERSION_CODE 0
-#endif
-#ifndef RTLINUX_VERSION
-#define RTLINUX_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))
-#endif
-
-// begin hack to workaround broken HRT_TO_8254() function on rtlinux
-#if RTLINUX_VERSION_CODE <= RTLINUX_VERSION(3,0,100)
-// this function sole purpose is to divide a long long by 838
-static inline RTIME nano2count(long long ns)
-{
-	do_div(ns, 838);
-	return ns;
-}
-
-#ifdef rt_get_time()
-#undef rt_get_time()
-#endif
-#define rt_get_time() nano2count(gethrtime())
-
-#else
-
-#define nano2count(x) HRT_TO_8254(x)
-#endif
-// end hack
-
-// rtl-rtai compatibility
-#define rt_task_wait_period() rt_task_wait()
-#define rt_pend_linux_srq(irq) rtl_global_pend_irq(irq)
-#define rt_free_srq(irq) rtl_free_soft_irq(irq)
-#define rt_request_srq(x,y,z) rtl_get_soft_irq(y,"timer")
-#define rt_task_init(a,b,c,d,e,f,g) rt_task_init(a,b,c,d,(e)+1)
-#define rt_task_resume(x) rt_task_wakeup(x)
-#define rt_set_oneshot_mode()
-#define start_rt_timer(x)
-#define stop_rt_timer()
-
-#endif
-#ifdef CONFIG_COMEDI_RTAI
-#include <rtai.h>
-#include <rtai_sched.h>
-
-#if RTAI_VERSION_CODE < RTAI_MANGLE_VERSION(3,3,0)
-#define comedi_rt_task_context_t	int
-#else
-#define comedi_rt_task_context_t	long
-#endif
-
-#endif
-
-/* This defines the fastest speed we will emulate.  Note that
- * without a watchdog (like in RTAI), we could easily overrun our
- * task period because analog input tends to be slow. */
-#define SPEED_LIMIT 100000	/* in nanoseconds */
-
-static int timer_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int timer_detach(struct comedi_device * dev);
-static int timer_inttrig(struct comedi_device * dev, struct comedi_subdevice * s,
-	unsigned int trig_num);
-static int timer_start_cmd(struct comedi_device * dev, struct comedi_subdevice * s);
-
-static struct comedi_driver driver_timer = {
-      module:THIS_MODULE,
-      driver_name:"comedi_rt_timer",
-      attach:timer_attach,
-      detach:timer_detach,
-//      open:           timer_open,
-};
-
-COMEDI_INITCLEANUP(driver_timer);
-
-struct timer_private {
-	comedi_t *device;	// device we are emulating commands for
-	int subd;		// subdevice we are emulating commands for
-	RT_TASK *rt_task;	// rt task that starts scans
-	RT_TASK *scan_task;	// rt task that controls conversion timing in a scan
-	/* io_function can point to either an input or output function
-	 * depending on what kind of subdevice we are emulating for */
-	int (*io_function) (struct comedi_device * dev, struct comedi_cmd * cmd,
-		unsigned int index);
-	// RTIME has units of 1 = 838 nanoseconds
-	// time at which first scan started, used to check scan timing
-	RTIME start;
-	// time between scans
-	RTIME scan_period;
-	// time between conversions in a scan
-	RTIME convert_period;
-	// flags
-	volatile int stop;	// indicates we should stop
-	volatile int rt_task_active;	// indicates rt_task is servicing a struct comedi_cmd
-	volatile int scan_task_active;	// indicates scan_task is servicing a struct comedi_cmd
-	unsigned timer_running:1;
-};
-#define devpriv ((struct timer_private *)dev->private)
-
-static int timer_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
-{
-	devpriv->stop = 1;
-
-	return 0;
-}
-
-// checks for scan timing error
-inline static int check_scan_timing(struct comedi_device * dev,
-	unsigned long long scan)
-{
-	RTIME now, timing_error;
-
-	now = rt_get_time();
-	timing_error = now - (devpriv->start + scan * devpriv->scan_period);
-	if (timing_error > devpriv->scan_period) {
-		comedi_error(dev, "timing error");
-		rt_printk("scan started %i ns late\n", timing_error * 838);
-		return -1;
-	}
-
-	return 0;
-}
-
-// checks for conversion timing error
-inline static int check_conversion_timing(struct comedi_device * dev,
-	RTIME scan_start, unsigned int conversion)
-{
-	RTIME now, timing_error;
-
-	now = rt_get_time();
-	timing_error =
-		now - (scan_start + conversion * devpriv->convert_period);
-	if (timing_error > devpriv->convert_period) {
-		comedi_error(dev, "timing error");
-		rt_printk("conversion started %i ns late\n",
-			timing_error * 838);
-		return -1;
-	}
-
-	return 0;
-}
-
-// devpriv->io_function for an input subdevice
-static int timer_data_read(struct comedi_device * dev, struct comedi_cmd * cmd,
-	unsigned int index)
-{
-	struct comedi_subdevice *s = dev->read_subdev;
-	int ret;
-	unsigned int data;
-
-	ret = comedi_data_read(devpriv->device, devpriv->subd,
-		CR_CHAN(cmd->chanlist[index]),
-		CR_RANGE(cmd->chanlist[index]),
-		CR_AREF(cmd->chanlist[index]), &data);
-	if (ret < 0) {
-		comedi_error(dev, "read error");
-		return -EIO;
-	}
-	if (s->flags & SDF_LSAMPL) {
-		cfc_write_long_to_buffer(s, data);
-	} else {
-		comedi_buf_put(s->async, data);
-	}
-
-	return 0;
-}
-
-// devpriv->io_function for an output subdevice
-static int timer_data_write(struct comedi_device * dev, struct comedi_cmd * cmd,
-	unsigned int index)
-{
-	struct comedi_subdevice *s = dev->write_subdev;
-	unsigned int num_bytes;
-	short data;
-	unsigned int long_data;
-	int ret;
-
-	if (s->flags & SDF_LSAMPL) {
-		num_bytes =
-			cfc_read_array_from_buffer(s, &long_data,
-			sizeof(long_data));
-	} else {
-		num_bytes = cfc_read_array_from_buffer(s, &data, sizeof(data));
-		long_data = data;
-	}
-
-	if (num_bytes == 0) {
-		comedi_error(dev, "buffer underrun");
-		return -EAGAIN;
-	}
-	ret = comedi_data_write(devpriv->device, devpriv->subd,
-		CR_CHAN(cmd->chanlist[index]),
-		CR_RANGE(cmd->chanlist[index]),
-		CR_AREF(cmd->chanlist[index]), long_data);
-	if (ret < 0) {
-		comedi_error(dev, "write error");
-		return -EIO;
-	}
-
-	return 0;
-}
-
-// devpriv->io_function for DIO subdevices
-static int timer_dio_read(struct comedi_device * dev, struct comedi_cmd * cmd,
-	unsigned int index)
-{
-	struct comedi_subdevice *s = dev->read_subdev;
-	int ret;
-	unsigned int data;
-
-	ret = comedi_dio_bitfield(devpriv->device, devpriv->subd, 0, &data);
-	if (ret < 0) {
-		comedi_error(dev, "read error");
-		return -EIO;
-	}
-
-	if (s->flags & SDF_LSAMPL)
-		cfc_write_long_to_buffer(s, data);
-	else
-		cfc_write_to_buffer(s, data);
-
-	return 0;
-}
-
-// performs scans
-static void scan_task_func(comedi_rt_task_context_t d)
-{
-	struct comedi_device *dev = (struct comedi_device *) d;
-	struct comedi_subdevice *s = dev->subdevices + 0;
-	struct comedi_async *async = s->async;
-	struct comedi_cmd *cmd = &async->cmd;
-	int i, ret;
-	unsigned long long n;
-	RTIME scan_start;
-
-	// every struct comedi_cmd causes one execution of while loop
-	while (1) {
-		devpriv->scan_task_active = 1;
-		// each for loop completes one scan
-		for (n = 0; n < cmd->stop_arg || cmd->stop_src == TRIG_NONE;
-			n++) {
-			if (n) {
-				// suspend task until next scan
-				ret = rt_task_suspend(devpriv->scan_task);
-				if (ret < 0) {
-					comedi_error(dev,
-						"error suspending scan task");
-					async->events |= COMEDI_CB_ERROR;
-					goto cleanup;
-				}
-			}
-			// check if stop flag was set (by timer_cancel())
-			if (devpriv->stop)
-				goto cleanup;
-			ret = check_scan_timing(dev, n);
-			if (ret < 0) {
-				async->events |= COMEDI_CB_ERROR;
-				goto cleanup;
-			}
-			scan_start = rt_get_time();
-			for (i = 0; i < cmd->scan_end_arg; i++) {
-				// conversion timing
-				if (cmd->convert_src == TRIG_TIMER && i) {
-					rt_task_wait_period();
-					ret = check_conversion_timing(dev,
-						scan_start, i);
-					if (ret < 0) {
-						async->events |=
-							COMEDI_CB_ERROR;
-						goto cleanup;
-					}
-				}
-				ret = devpriv->io_function(dev, cmd, i);
-				if (ret < 0) {
-					async->events |= COMEDI_CB_ERROR;
-					goto cleanup;
-				}
-			}
-			s->async->events |= COMEDI_CB_BLOCK;
-			comedi_event(dev, s);
-			s->async->events = 0;
-		}
-
-	      cleanup:
-
-		comedi_unlock(devpriv->device, devpriv->subd);
-		async->events |= COMEDI_CB_EOA;
-		comedi_event(dev, s);
-		async->events = 0;
-		devpriv->scan_task_active = 0;
-		// suspend task until next struct comedi_cmd
-		rt_task_suspend(devpriv->scan_task);
-	}
-}
-
-static void timer_task_func(comedi_rt_task_context_t d)
-{
-	struct comedi_device *dev = (struct comedi_device *) d;
-	struct comedi_subdevice *s = dev->subdevices + 0;
-	struct comedi_cmd *cmd = &s->async->cmd;
-	int ret;
-	unsigned long long n;
-
-	// every struct comedi_cmd causes one execution of while loop
-	while (1) {
-		devpriv->rt_task_active = 1;
-		devpriv->scan_task_active = 1;
-		devpriv->start = rt_get_time();
-
-		for (n = 0; n < cmd->stop_arg || cmd->stop_src == TRIG_NONE;
-			n++) {
-			// scan timing
-			if (n)
-				rt_task_wait_period();
-			if (devpriv->scan_task_active == 0) {
-				goto cleanup;
-			}
-			ret = rt_task_make_periodic(devpriv->scan_task,
-				devpriv->start + devpriv->scan_period * n,
-				devpriv->convert_period);
-			if (ret < 0) {
-				comedi_error(dev, "bug!");
-			}
-		}
-
-	      cleanup:
-
-		devpriv->rt_task_active = 0;
-		// suspend until next struct comedi_cmd
-		rt_task_suspend(devpriv->rt_task);
-	}
-}
-
-static int timer_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
-{
-	struct comedi_insn xinsn = *insn;
-
-	xinsn.data = data;
-	xinsn.subdev = devpriv->subd;
-
-	return comedi_do_insn(devpriv->device, &xinsn);
-}
-
-static int cmdtest_helper(struct comedi_cmd * cmd,
-	unsigned int start_src,
-	unsigned int scan_begin_src,
-	unsigned int convert_src,
-	unsigned int scan_end_src, unsigned int stop_src)
-{
-	int err = 0;
-	int tmp;
-
-	tmp = cmd->start_src;
-	cmd->start_src &= start_src;
-	if (!cmd->start_src || tmp != cmd->start_src)
-		err++;
-
-	tmp = cmd->scan_begin_src;
-	cmd->scan_begin_src &= scan_begin_src;
-	if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src)
-		err++;
-
-	tmp = cmd->convert_src;
-	cmd->convert_src &= convert_src;
-	if (!cmd->convert_src || tmp != cmd->convert_src)
-		err++;
-
-	tmp = cmd->scan_end_src;
-	cmd->scan_end_src &= scan_end_src;
-	if (!cmd->scan_end_src || tmp != cmd->scan_end_src)
-		err++;
-
-	tmp = cmd->stop_src;
-	cmd->stop_src &= stop_src;
-	if (!cmd->stop_src || tmp != cmd->stop_src)
-		err++;
-
-	return err;
-}
-
-static int timer_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
-{
-	int err = 0;
-	unsigned int start_src = 0;
-
-	if (s->type == COMEDI_SUBD_AO)
-		start_src = TRIG_INT;
-	else
-		start_src = TRIG_NOW;
-
-	err = cmdtest_helper(cmd, start_src,	/* start_src */
-		TRIG_TIMER | TRIG_FOLLOW,	/* scan_begin_src */
-		TRIG_NOW | TRIG_TIMER,	/* convert_src */
-		TRIG_COUNT,	/* scan_end_src */
-		TRIG_COUNT | TRIG_NONE);	/* stop_src */
-	if (err)
-		return 1;
-
-	/* step 2: make sure trigger sources are unique and mutually
-	 * compatible */
-
-	if (cmd->start_src != TRIG_NOW && cmd->start_src != TRIG_INT)
-		err++;
-	if (cmd->scan_begin_src != TRIG_TIMER &&
-		cmd->scan_begin_src != TRIG_FOLLOW)
-		err++;
-	if (cmd->convert_src != TRIG_TIMER && cmd->convert_src != TRIG_NOW)
-		err++;
-	if (cmd->stop_src != TRIG_COUNT && cmd->stop_src != TRIG_NONE)
-		err++;
-	if (cmd->scan_begin_src == TRIG_FOLLOW
-		&& cmd->convert_src != TRIG_TIMER)
-		err++;
-	if (cmd->convert_src == TRIG_NOW && cmd->scan_begin_src != TRIG_TIMER)
-		err++;
-
-	if (err)
-		return 2;
-
-	/* step 3: make sure arguments are trivially compatible */
-	// limit frequency, this is fairly arbitrary
-	if (cmd->scan_begin_src == TRIG_TIMER) {
-		if (cmd->scan_begin_arg < SPEED_LIMIT) {
-			cmd->scan_begin_arg = SPEED_LIMIT;
-			err++;
-		}
-	}
-	if (cmd->convert_src == TRIG_TIMER) {
-		if (cmd->convert_arg < SPEED_LIMIT) {
-			cmd->convert_arg = SPEED_LIMIT;
-			err++;
-		}
-	}
-	// make sure conversion and scan frequencies are compatible
-	if (cmd->convert_src == TRIG_TIMER && cmd->scan_begin_src == TRIG_TIMER) {
-		if (cmd->convert_arg * cmd->scan_end_arg > cmd->scan_begin_arg) {
-			cmd->scan_begin_arg =
-				cmd->convert_arg * cmd->scan_end_arg;
-			err++;
-		}
-	}
-	if (err)
-		return 3;
-
-	/* step 4: fix up and arguments */
-	if (err)
-		return 4;
-
-	return 0;
-}
-
-static int timer_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
-{
-	int ret;
-	struct comedi_cmd *cmd = &s->async->cmd;
-
-	/* hack attack: drivers are not supposed to do this: */
-	dev->rt = 1;
-
-	// make sure tasks have finished cleanup of last struct comedi_cmd
-	if (devpriv->rt_task_active || devpriv->scan_task_active)
-		return -EBUSY;
-
-	ret = comedi_lock(devpriv->device, devpriv->subd);
-	if (ret < 0) {
-		comedi_error(dev, "failed to obtain lock");
-		return ret;
-	}
-	switch (cmd->scan_begin_src) {
-	case TRIG_TIMER:
-		devpriv->scan_period = nano2count(cmd->scan_begin_arg);
-		break;
-	case TRIG_FOLLOW:
-		devpriv->scan_period =
-			nano2count(cmd->convert_arg * cmd->scan_end_arg);
-		break;
-	default:
-		comedi_error(dev, "bug setting scan period!");
-		return -1;
-		break;
-	}
-	switch (cmd->convert_src) {
-	case TRIG_TIMER:
-		devpriv->convert_period = nano2count(cmd->convert_arg);
-		break;
-	case TRIG_NOW:
-		devpriv->convert_period = 1;
-		break;
-	default:
-		comedi_error(dev, "bug setting conversion period!");
-		return -1;
-		break;
-	}
-
-	if (cmd->start_src == TRIG_NOW)
-		return timer_start_cmd(dev, s);
-
-	s->async->inttrig = timer_inttrig;
-
-	return 0;
-}
-
-static int timer_inttrig(struct comedi_device * dev, struct comedi_subdevice * s,
-	unsigned int trig_num)
-{
-	if (trig_num != 0)
-		return -EINVAL;
-
-	s->async->inttrig = NULL;
-
-	return timer_start_cmd(dev, s);
-}
-
-static int timer_start_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
-{
-	struct comedi_async *async = s->async;
-	struct comedi_cmd *cmd = &async->cmd;
-	RTIME now, delay, period;
-	int ret;
-
-	devpriv->stop = 0;
-	s->async->events = 0;
-
-	if (cmd->start_src == TRIG_NOW)
-		delay = nano2count(cmd->start_arg);
-	else
-		delay = 0;
-
-	now = rt_get_time();
-	/* Using 'period' this way gets around some weird bug in gcc-2.95.2
-	 * that generates the compile error 'internal error--unrecognizable insn'
-	 * when rt_task_make_period() is called (observed with rtlinux-3.1, linux-2.2.19).
-	 *  - fmhess */
-	period = devpriv->scan_period;
-	ret = rt_task_make_periodic(devpriv->rt_task, now + delay, period);
-	if (ret < 0) {
-		comedi_error(dev, "error starting rt_task");
-		return ret;
-	}
-	return 0;
-}
-
-static int timer_attach(struct comedi_device * dev, struct comedi_devconfig * it)
-{
-	int ret;
-	struct comedi_subdevice *s, *emul_s;
-	struct comedi_device *emul_dev;
-	/* These should probably be devconfig options[] */
-	const int timer_priority = 4;
-	const int scan_priority = timer_priority + 1;
-	char path[20];
-
-	printk("comedi%d: timer: ", dev->minor);
-
-	dev->board_name = "timer";
-
-	if ((ret = alloc_subdevices(dev, 1)) < 0)
-		return ret;
-	if ((ret = alloc_private(dev, sizeof(struct timer_private))) < 0)
-		return ret;
-
-	sprintf(path, "/dev/comedi%d", it->options[0]);
-	devpriv->device = comedi_open(path);
-	devpriv->subd = it->options[1];
-
-	printk("emulating commands for minor %i, subdevice %d\n",
-		it->options[0], devpriv->subd);
-
-	emul_dev = devpriv->device;
-	emul_s = emul_dev->subdevices + devpriv->subd;
-
-	// input or output subdevice
-	s = dev->subdevices + 0;
-	s->type = emul_s->type;
-	s->subdev_flags = emul_s->subdev_flags;	/* SDF_GROUND (to fool check_driver) */
-	s->n_chan = emul_s->n_chan;
-	s->len_chanlist = 1024;
-	s->do_cmd = timer_cmd;
-	s->do_cmdtest = timer_cmdtest;
-	s->cancel = timer_cancel;
-	s->maxdata = emul_s->maxdata;
-	s->range_table = emul_s->range_table;
-	s->range_table_list = emul_s->range_table_list;
-	switch (emul_s->type) {
-	case COMEDI_SUBD_AI:
-		s->insn_read = timer_insn;
-		dev->read_subdev = s;
-		s->subdev_flags |= SDF_CMD_READ;
-		devpriv->io_function = timer_data_read;
-		break;
-	case COMEDI_SUBD_AO:
-		s->insn_write = timer_insn;
-		s->insn_read = timer_insn;
-		dev->write_subdev = s;
-		s->subdev_flags |= SDF_CMD_WRITE;
-		devpriv->io_function = timer_data_write;
-		break;
-	case COMEDI_SUBD_DIO:
-		s->insn_write = timer_insn;
-		s->insn_read = timer_insn;
-		s->insn_bits = timer_insn;
-		dev->read_subdev = s;
-		s->subdev_flags |= SDF_CMD_READ;
-		devpriv->io_function = timer_dio_read;
-		break;
-	default:
-		comedi_error(dev, "failed to determine subdevice type!");
-		return -EINVAL;
-	}
-
-	rt_set_oneshot_mode();
-	start_rt_timer(1);
-	devpriv->timer_running = 1;
-
-	devpriv->rt_task = kzalloc(sizeof(RT_TASK), GFP_KERNEL);
-
-	// initialize real-time tasks
-	ret = rt_task_init(devpriv->rt_task, timer_task_func,
-		(comedi_rt_task_context_t) dev, 3000, timer_priority, 0, 0);
-	if (ret < 0) {
-		comedi_error(dev, "error initalizing rt_task");
-		kfree(devpriv->rt_task);
-		devpriv->rt_task = 0;
-		return ret;
-	}
-
-	devpriv->scan_task = kzalloc(sizeof(RT_TASK), GFP_KERNEL);
-
-	ret = rt_task_init(devpriv->scan_task, scan_task_func,
-		(comedi_rt_task_context_t) dev, 3000, scan_priority, 0, 0);
-	if (ret < 0) {
-		comedi_error(dev, "error initalizing scan_task");
-		kfree(devpriv->scan_task);
-		devpriv->scan_task = 0;
-		return ret;
-	}
-
-	return 1;
-}
-
-// free allocated resources
-static int timer_detach(struct comedi_device * dev)
-{
-	printk("comedi%d: timer: remove\n", dev->minor);
-
-	if (devpriv) {
-		if (devpriv->rt_task) {
-			rt_task_delete(devpriv->rt_task);
-			kfree(devpriv->rt_task);
-		}
-		if (devpriv->scan_task) {
-			rt_task_delete(devpriv->scan_task);
-			kfree(devpriv->scan_task);
-		}
-		if (devpriv->timer_running)
-			stop_rt_timer();
-		if (devpriv->device)
-			comedi_close(devpriv->device);
-	}
-	return 0;
-}
diff --git a/drivers/staging/comedi/drivers/comedi_test.c b/drivers/staging/comedi/drivers/comedi_test.c
index e679328a4f8..9b8cf62973b 100644
--- a/drivers/staging/comedi/drivers/comedi_test.c
+++ b/drivers/staging/comedi/drivers/comedi_test.c
@@ -55,6 +55,7 @@ zero volts).
 #include <asm/div64.h>
 
 #include "comedi_fc.h"
+#include <linux/timer.h>
 
 /* Board descriptions */
 struct waveform_board {
@@ -102,7 +103,7 @@ static struct comedi_driver driver_waveform = {
       .detach =		waveform_detach,
       .board_name =	&waveform_boards[0].name,
       .offset =		sizeof(struct waveform_board),
-      .num_names =	sizeof(waveform_boards) / sizeof(struct waveform_board),
+      .num_names =	ARRAY_SIZE(waveform_boards),
 };
 
 COMEDI_INITCLEANUP(driver_waveform);
diff --git a/drivers/staging/comedi/drivers/contec_pci_dio.c b/drivers/staging/comedi/drivers/contec_pci_dio.c
index 1f194a0a45d..6c58e999032 100644
--- a/drivers/staging/comedi/drivers/contec_pci_dio.c
+++ b/drivers/staging/comedi/drivers/contec_pci_dio.c
@@ -75,29 +75,29 @@ struct contec_private {
 
 #define devpriv ((struct contec_private *)dev->private)
 
-static int contec_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int contec_detach(struct comedi_device * dev);
+static int contec_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int contec_detach(struct comedi_device *dev);
 static struct comedi_driver driver_contec = {
-      driver_name:"contec_pci_dio",
-      module:THIS_MODULE,
-      attach:contec_attach,
-      detach:contec_detach,
+	.driver_name = "contec_pci_dio",
+	.module = THIS_MODULE,
+	.attach = contec_attach,
+	.detach = contec_detach,
 };
 
 /* Classic digital IO */
-static int contec_di_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int contec_do_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int contec_di_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int contec_do_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
 #if 0
-static int contec_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd);
+static int contec_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd);
 
 static int contec_ns_to_timer(unsigned int *ns, int round);
 #endif
 
-static int contec_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int contec_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct pci_dev *pcidev;
 	struct comedi_subdevice *s;
@@ -164,7 +164,7 @@ static int contec_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	return -EIO;
 }
 
-static int contec_detach(struct comedi_device * dev)
+static int contec_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: contec: remove\n", dev->minor);
 
@@ -179,8 +179,8 @@ static int contec_detach(struct comedi_device * dev)
 }
 
 #if 0
-static int contec_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int contec_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	printk("contec_cmdtest called\n");
 	return 0;
@@ -192,8 +192,8 @@ static int contec_ns_to_timer(unsigned int *ns, int round)
 }
 #endif
 
-static int contec_do_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int contec_do_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 
 	printk("contec_do_insn_bits called\n");
@@ -205,19 +205,19 @@ static int contec_do_insn_bits(struct comedi_device * dev, struct comedi_subdevi
 	if (data[0]) {
 		s->state &= ~data[0];
 		s->state |= data[0] & data[1];
-		rt_printk("  out: %d on %lx\n", s->state,
+		printk("  out: %d on %lx\n", s->state,
 			dev->iobase + thisboard->out_offs);
 		outw(s->state, dev->iobase + thisboard->out_offs);
 	}
 	return 2;
 }
 
-static int contec_di_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int contec_di_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 
-	rt_printk("contec_di_insn_bits called\n");
-	rt_printk(" data: %d %d\n", data[0], data[1]);
+	printk("contec_di_insn_bits called\n");
+	printk(" data: %d %d\n", data[0], data[1]);
 
 	if (insn->n != 2)
 		return -EINVAL;
diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c
index 3b8444f09f2..d4526c616a9 100644
--- a/drivers/staging/comedi/drivers/daqboard2000.c
+++ b/drivers/staging/comedi/drivers/daqboard2000.c
@@ -119,6 +119,7 @@ Configuration options:
 #include "../comedidev.h"
 
 #include <linux/delay.h>
+#include <linux/interrupt.h>
 
 #include "comedi_pci.h"
 #include "8255.h"
@@ -129,7 +130,7 @@ Configuration options:
 #define DAQBOARD2000_DAQ_SIZE 		0x1002
 #define DAQBOARD2000_PLX_SIZE 		0x100
 
-// Initialization bits for the Serial EEPROM Control Register
+/* Initialization bits for the Serial EEPROM Control Register */
 #define DAQBOARD2000_SECRProgPinHi      0x8001767e
 #define DAQBOARD2000_SECRProgPinLo      0x8000767e
 #define DAQBOARD2000_SECRLocalBusHi     0xc000767e
@@ -137,14 +138,14 @@ Configuration options:
 #define DAQBOARD2000_SECRReloadHi       0xa000767e
 #define DAQBOARD2000_SECRReloadLo       0x8000767e
 
-// SECR status bits
+/* SECR status bits */
 #define DAQBOARD2000_EEPROM_PRESENT     0x10000000
 
-// CPLD status bits
+/* CPLD status bits */
 #define DAQBOARD2000_CPLD_INIT 		0x0002
 #define DAQBOARD2000_CPLD_DONE 		0x0004
 
-// Available ranges
+/* Available ranges */
 static const struct comedi_lrange range_daqboard2000_ai = { 13, {
 			RANGE(-10, 10),
 			RANGE(-5, 5),
@@ -168,65 +169,65 @@ static const struct comedi_lrange range_daqboard2000_ao = { 1, {
 };
 
 struct daqboard2000_hw {
-	volatile u16 acqControl;	// 0x00
-	volatile u16 acqScanListFIFO;	// 0x02
-	volatile u32 acqPacerClockDivLow;	// 0x04
-
-	volatile u16 acqScanCounter;	// 0x08
-	volatile u16 acqPacerClockDivHigh;	// 0x0a
-	volatile u16 acqTriggerCount;	// 0x0c
-	volatile u16 fill2;	// 0x0e
-	volatile u16 acqResultsFIFO;	// 0x10
-	volatile u16 fill3;	// 0x12
-	volatile u16 acqResultsShadow;	// 0x14
-	volatile u16 fill4;	// 0x16
-	volatile u16 acqAdcResult;	// 0x18
-	volatile u16 fill5;	// 0x1a
-	volatile u16 dacScanCounter;	// 0x1c
-	volatile u16 fill6;	// 0x1e
-
-	volatile u16 dacControl;	// 0x20
-	volatile u16 fill7;	// 0x22
-	volatile s16 dacFIFO;	// 0x24
-	volatile u16 fill8[2];	// 0x26
-	volatile u16 dacPacerClockDiv;	// 0x2a
-	volatile u16 refDacs;	// 0x2c
-	volatile u16 fill9;	// 0x2e
-
-	volatile u16 dioControl;	// 0x30
-	volatile s16 dioP3hsioData;	// 0x32
-	volatile u16 dioP3Control;	// 0x34
-	volatile u16 calEepromControl;	// 0x36
-	volatile s16 dacSetting[4];	// 0x38
-	volatile s16 dioP2ExpansionIO8Bit[32];	// 0x40
-
-	volatile u16 ctrTmrControl;	// 0x80
-	volatile u16 fill10[3];	// 0x82
-	volatile s16 ctrInput[4];	// 0x88
-	volatile u16 fill11[8];	// 0x90
-	volatile u16 timerDivisor[2];	// 0xa0
-	volatile u16 fill12[6];	// 0xa4
-
-	volatile u16 dmaControl;	// 0xb0
-	volatile u16 trigControl;	// 0xb2
-	volatile u16 fill13[2];	// 0xb4
-	volatile u16 calEeprom;	// 0xb8
-	volatile u16 acqDigitalMark;	// 0xba
-	volatile u16 trigDacs;	// 0xbc
-	volatile u16 fill14;	// 0xbe
-	volatile s16 dioP2ExpansionIO16Bit[32];	// 0xc0
+	volatile u16 acqControl;	/*  0x00 */
+	volatile u16 acqScanListFIFO;	/*  0x02 */
+	volatile u32 acqPacerClockDivLow;	/*  0x04 */
+
+	volatile u16 acqScanCounter;	/*  0x08 */
+	volatile u16 acqPacerClockDivHigh;	/*  0x0a */
+	volatile u16 acqTriggerCount;	/*  0x0c */
+	volatile u16 fill2;	/*  0x0e */
+	volatile u16 acqResultsFIFO;	/*  0x10 */
+	volatile u16 fill3;	/*  0x12 */
+	volatile u16 acqResultsShadow;	/*  0x14 */
+	volatile u16 fill4;	/*  0x16 */
+	volatile u16 acqAdcResult;	/*  0x18 */
+	volatile u16 fill5;	/*  0x1a */
+	volatile u16 dacScanCounter;	/*  0x1c */
+	volatile u16 fill6;	/*  0x1e */
+
+	volatile u16 dacControl;	/*  0x20 */
+	volatile u16 fill7;	/*  0x22 */
+	volatile s16 dacFIFO;	/*  0x24 */
+	volatile u16 fill8[2];	/*  0x26 */
+	volatile u16 dacPacerClockDiv;	/*  0x2a */
+	volatile u16 refDacs;	/*  0x2c */
+	volatile u16 fill9;	/*  0x2e */
+
+	volatile u16 dioControl;	/*  0x30 */
+	volatile s16 dioP3hsioData;	/*  0x32 */
+	volatile u16 dioP3Control;	/*  0x34 */
+	volatile u16 calEepromControl;	/*  0x36 */
+	volatile s16 dacSetting[4];	/*  0x38 */
+	volatile s16 dioP2ExpansionIO8Bit[32];	/*  0x40 */
+
+	volatile u16 ctrTmrControl;	/*  0x80 */
+	volatile u16 fill10[3];	/*  0x82 */
+	volatile s16 ctrInput[4];	/*  0x88 */
+	volatile u16 fill11[8];	/*  0x90 */
+	volatile u16 timerDivisor[2];	/*  0xa0 */
+	volatile u16 fill12[6];	/*  0xa4 */
+
+	volatile u16 dmaControl;	/*  0xb0 */
+	volatile u16 trigControl;	/*  0xb2 */
+	volatile u16 fill13[2];	/*  0xb4 */
+	volatile u16 calEeprom;	/*  0xb8 */
+	volatile u16 acqDigitalMark;	/*  0xba */
+	volatile u16 trigDacs;	/*  0xbc */
+	volatile u16 fill14;	/*  0xbe */
+	volatile s16 dioP2ExpansionIO16Bit[32];	/*  0xc0 */
 };
 
 /* Scan Sequencer programming */
 #define DAQBOARD2000_SeqStartScanList            0x0011
 #define DAQBOARD2000_SeqStopScanList             0x0010
 
-// Prepare for acquisition
+/* Prepare for acquisition */
 #define DAQBOARD2000_AcqResetScanListFifo        0x0004
 #define DAQBOARD2000_AcqResetResultsFifo         0x0002
 #define DAQBOARD2000_AcqResetConfigPipe          0x0001
 
-// Acqusition status bits
+/* Acqusition status bits */
 #define DAQBOARD2000_AcqResultsFIFOMore1Sample   0x0001
 #define DAQBOARD2000_AcqResultsFIFOHasValidData  0x0002
 #define DAQBOARD2000_AcqResultsFIFOOverrun       0x0004
@@ -239,7 +240,7 @@ struct daqboard2000_hw {
 #define DAQBOARD2000_DacPacerOverrun             0x0200
 #define DAQBOARD2000_AcqHardwareError            0x01c0
 
-// Scan Sequencer programming
+/* Scan Sequencer programming */
 #define DAQBOARD2000_SeqStartScanList            0x0011
 #define DAQBOARD2000_SeqStopScanList             0x0010
 
@@ -254,7 +255,7 @@ struct daqboard2000_hw {
 #define DAQBOARD2000_AdcPacerInternalOutEnable   0x0008
 #define DAQBOARD2000_AdcPacerExternalRising      0x0100
 
-// DAC status
+/* DAC status */
 #define DAQBOARD2000_DacFull                     0x0001
 #define DAQBOARD2000_RefBusy                     0x0002
 #define DAQBOARD2000_TrgBusy                     0x0004
@@ -264,7 +265,7 @@ struct daqboard2000_hw {
 #define DAQBOARD2000_Dac2Busy                    0x0040
 #define DAQBOARD2000_Dac3Busy                    0x0080
 
-// DAC control
+/* DAC control */
 #define DAQBOARD2000_Dac0Enable                  0x0021
 #define DAQBOARD2000_Dac1Enable                  0x0031
 #define DAQBOARD2000_Dac2Enable                  0x0041
@@ -292,18 +293,18 @@ struct daqboard2000_hw {
 #define DAQBOARD2000_TrigEnable                  0x0001
 #define DAQBOARD2000_TrigDisable                 0x0000
 
-// Reference Dac Selection
+/* Reference Dac Selection */
 #define DAQBOARD2000_PosRefDacSelect             0x0100
 #define DAQBOARD2000_NegRefDacSelect             0x0000
 
-static int daqboard2000_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int daqboard2000_detach(struct comedi_device * dev);
+static int daqboard2000_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int daqboard2000_detach(struct comedi_device *dev);
 
 static struct comedi_driver driver_daqboard2000 = {
-      driver_name:"daqboard2000",
-      module:THIS_MODULE,
-      attach:daqboard2000_attach,
-      detach:daqboard2000_detach,
+	.driver_name = "daqboard2000",
+	.module = THIS_MODULE,
+	.attach = daqboard2000_attach,
+	.detach = daqboard2000_detach,
 };
 
 struct daq200_boardtype {
@@ -338,17 +339,17 @@ struct daqboard2000_private {
 
 #define devpriv ((struct daqboard2000_private *)dev->private)
 
-static void writeAcqScanListEntry(struct comedi_device * dev, u16 entry)
+static void writeAcqScanListEntry(struct comedi_device *dev, u16 entry)
 {
 	struct daqboard2000_hw *fpga = devpriv->daq;
 
-//  comedi_udelay(4);
+/* udelay(4); */
 	fpga->acqScanListFIFO = entry & 0x00ff;
-//  comedi_udelay(4);
+/* udelay(4); */
 	fpga->acqScanListFIFO = (entry >> 8) & 0x00ff;
 }
 
-static void setup_sampling(struct comedi_device * dev, int chan, int gain)
+static void setup_sampling(struct comedi_device *dev, int chan, int gain)
 {
 	u16 word0, word1, word2, word3;
 
@@ -393,8 +394,8 @@ static void setup_sampling(struct comedi_device * dev, int chan, int gain)
 	writeAcqScanListEntry(dev, word3);
 }
 
-static int daqboard2000_ai_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int daqboard2000_ai_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	struct daqboard2000_hw *fpga = devpriv->daq;
@@ -425,14 +426,14 @@ static int daqboard2000_ai_insn_read(struct comedi_device * dev, struct comedi_s
 			if (fpga->acqControl & DAQBOARD2000_AcqConfigPipeFull) {
 				break;
 			}
-			//comedi_udelay(2);
+			/* udelay(2); */
 		}
 		fpga->acqControl = DAQBOARD2000_AdcPacerEnable;
 		for (timeout = 0; timeout < 20; timeout++) {
 			if (fpga->acqControl & DAQBOARD2000_AcqLogicScanning) {
 				break;
 			}
-			//comedi_udelay(2);
+			/* udelay(2); */
 		}
 		for (timeout = 0; timeout < 20; timeout++) {
 			if (fpga->
@@ -440,7 +441,7 @@ static int daqboard2000_ai_insn_read(struct comedi_device * dev, struct comedi_s
 				DAQBOARD2000_AcqResultsFIFOHasValidData) {
 				break;
 			}
-			//comedi_udelay(2);
+			/* udelay(2); */
 		}
 		data[i] = fpga->acqResultsFIFO;
 		fpga->acqControl = DAQBOARD2000_AdcPacerDisable;
@@ -450,8 +451,8 @@ static int daqboard2000_ai_insn_read(struct comedi_device * dev, struct comedi_s
 	return i;
 }
 
-static int daqboard2000_ao_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int daqboard2000_ao_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
@@ -463,8 +464,8 @@ static int daqboard2000_ao_insn_read(struct comedi_device * dev, struct comedi_s
 	return i;
 }
 
-static int daqboard2000_ao_insn_write(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int daqboard2000_ao_insn_write(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
@@ -476,54 +477,54 @@ static int daqboard2000_ao_insn_write(struct comedi_device * dev, struct comedi_
 		 * OK, since it works OK without enabling the DAC's, let's keep
 		 * it as simple as possible...
 		 */
-		//fpga->dacControl = (chan + 2) * 0x0010 | 0x0001; comedi_udelay(1000);
+		/* fpga->dacControl = (chan + 2) * 0x0010 | 0x0001; udelay(1000); */
 		fpga->dacSetting[chan] = data[i];
 		for (timeout = 0; timeout < 20; timeout++) {
 			if ((fpga->dacControl & ((chan + 1) * 0x0010)) == 0) {
 				break;
 			}
-			//comedi_udelay(2);
+			/* udelay(2); */
 		}
 		devpriv->ao_readback[chan] = data[i];
 		/*
 		 * Since we never enabled the DAC's, we don't need to disable it...
-		 * fpga->dacControl = (chan + 2) * 0x0010 | 0x0000; comedi_udelay(1000);
+		 * fpga->dacControl = (chan + 2) * 0x0010 | 0x0000; udelay(1000);
 		 */
 	}
 
 	return i;
 }
 
-static void daqboard2000_resetLocalBus(struct comedi_device * dev)
+static void daqboard2000_resetLocalBus(struct comedi_device *dev)
 {
 	printk("daqboard2000_resetLocalBus\n");
 	writel(DAQBOARD2000_SECRLocalBusHi, devpriv->plx + 0x6c);
-	comedi_udelay(10000);
+	udelay(10000);
 	writel(DAQBOARD2000_SECRLocalBusLo, devpriv->plx + 0x6c);
-	comedi_udelay(10000);
+	udelay(10000);
 }
 
-static void daqboard2000_reloadPLX(struct comedi_device * dev)
+static void daqboard2000_reloadPLX(struct comedi_device *dev)
 {
 	printk("daqboard2000_reloadPLX\n");
 	writel(DAQBOARD2000_SECRReloadLo, devpriv->plx + 0x6c);
-	comedi_udelay(10000);
+	udelay(10000);
 	writel(DAQBOARD2000_SECRReloadHi, devpriv->plx + 0x6c);
-	comedi_udelay(10000);
+	udelay(10000);
 	writel(DAQBOARD2000_SECRReloadLo, devpriv->plx + 0x6c);
-	comedi_udelay(10000);
+	udelay(10000);
 }
 
-static void daqboard2000_pulseProgPin(struct comedi_device * dev)
+static void daqboard2000_pulseProgPin(struct comedi_device *dev)
 {
 	printk("daqboard2000_pulseProgPin 1\n");
 	writel(DAQBOARD2000_SECRProgPinHi, devpriv->plx + 0x6c);
-	comedi_udelay(10000);
+	udelay(10000);
 	writel(DAQBOARD2000_SECRProgPinLo, devpriv->plx + 0x6c);
-	comedi_udelay(10000);	/* Not in the original code, but I like symmetry... */
+	udelay(10000);	/* Not in the original code, but I like symmetry... */
 }
 
-static int daqboard2000_pollCPLD(struct comedi_device * dev, int mask)
+static int daqboard2000_pollCPLD(struct comedi_device *dev, int mask)
 {
 	int result = 0;
 	int i;
@@ -536,17 +537,17 @@ static int daqboard2000_pollCPLD(struct comedi_device * dev, int mask)
 			result = 1;
 			break;
 		}
-		comedi_udelay(100);
+		udelay(100);
 	}
-	comedi_udelay(5);
+	udelay(5);
 	return result;
 }
 
-static int daqboard2000_writeCPLD(struct comedi_device * dev, int data)
+static int daqboard2000_writeCPLD(struct comedi_device *dev, int data)
 {
 	int result = 0;
 
-	comedi_udelay(10);
+	udelay(10);
 	writew(data, devpriv->daq + 0x1000);
 	if ((readw(devpriv->daq + 0x1000) & DAQBOARD2000_CPLD_INIT) ==
 		DAQBOARD2000_CPLD_INIT) {
@@ -555,7 +556,7 @@ static int daqboard2000_writeCPLD(struct comedi_device * dev, int data)
 	return result;
 }
 
-static int initialize_daqboard2000(struct comedi_device * dev,
+static int initialize_daqboard2000(struct comedi_device *dev,
 	unsigned char *cpld_array, int len)
 {
 	int result = -EIO;
@@ -613,75 +614,75 @@ static int initialize_daqboard2000(struct comedi_device * dev,
 	return result;
 }
 
-static void daqboard2000_adcStopDmaTransfer(struct comedi_device * dev)
+static void daqboard2000_adcStopDmaTransfer(struct comedi_device *dev)
 {
 /*  printk("Implement: daqboard2000_adcStopDmaTransfer\n");*/
 }
 
-static void daqboard2000_adcDisarm(struct comedi_device * dev)
+static void daqboard2000_adcDisarm(struct comedi_device *dev)
 {
 	struct daqboard2000_hw *fpga = devpriv->daq;
 
 	/* Disable hardware triggers */
-	comedi_udelay(2);
+	udelay(2);
 	fpga->trigControl = DAQBOARD2000_TrigAnalog | DAQBOARD2000_TrigDisable;
-	comedi_udelay(2);
+	udelay(2);
 	fpga->trigControl = DAQBOARD2000_TrigTTL | DAQBOARD2000_TrigDisable;
 
 	/* Stop the scan list FIFO from loading the configuration pipe */
-	comedi_udelay(2);
+	udelay(2);
 	fpga->acqControl = DAQBOARD2000_SeqStopScanList;
 
 	/* Stop the pacer clock */
-	comedi_udelay(2);
+	udelay(2);
 	fpga->acqControl = DAQBOARD2000_AdcPacerDisable;
 
 	/* Stop the input dma (abort channel 1) */
 	daqboard2000_adcStopDmaTransfer(dev);
 }
 
-static void daqboard2000_activateReferenceDacs(struct comedi_device * dev)
+static void daqboard2000_activateReferenceDacs(struct comedi_device *dev)
 {
 	struct daqboard2000_hw *fpga = devpriv->daq;
 	int timeout;
 
-	// Set the + reference dac value in the FPGA
+	/*  Set the + reference dac value in the FPGA */
 	fpga->refDacs = 0x80 | DAQBOARD2000_PosRefDacSelect;
 	for (timeout = 0; timeout < 20; timeout++) {
 		if ((fpga->dacControl & DAQBOARD2000_RefBusy) == 0) {
 			break;
 		}
-		comedi_udelay(2);
+		udelay(2);
 	}
 /*  printk("DAQBOARD2000_PosRefDacSelect %d\n", timeout);*/
 
-	// Set the - reference dac value in the FPGA
+	/*  Set the - reference dac value in the FPGA */
 	fpga->refDacs = 0x80 | DAQBOARD2000_NegRefDacSelect;
 	for (timeout = 0; timeout < 20; timeout++) {
 		if ((fpga->dacControl & DAQBOARD2000_RefBusy) == 0) {
 			break;
 		}
-		comedi_udelay(2);
+		udelay(2);
 	}
 /*  printk("DAQBOARD2000_NegRefDacSelect %d\n", timeout);*/
 }
 
-static void daqboard2000_initializeCtrs(struct comedi_device * dev)
+static void daqboard2000_initializeCtrs(struct comedi_device *dev)
 {
 /*  printk("Implement: daqboard2000_initializeCtrs\n");*/
 }
 
-static void daqboard2000_initializeTmrs(struct comedi_device * dev)
+static void daqboard2000_initializeTmrs(struct comedi_device *dev)
 {
 /*  printk("Implement: daqboard2000_initializeTmrs\n");*/
 }
 
-static void daqboard2000_dacDisarm(struct comedi_device * dev)
+static void daqboard2000_dacDisarm(struct comedi_device *dev)
 {
 /*  printk("Implement: daqboard2000_dacDisarm\n");*/
 }
 
-static void daqboard2000_initializeAdc(struct comedi_device * dev)
+static void daqboard2000_initializeAdc(struct comedi_device *dev)
 {
 	daqboard2000_adcDisarm(dev);
 	daqboard2000_activateReferenceDacs(dev);
@@ -689,7 +690,7 @@ static void daqboard2000_initializeAdc(struct comedi_device * dev)
 	daqboard2000_initializeTmrs(dev);
 }
 
-static void daqboard2000_initializeDac(struct comedi_device * dev)
+static void daqboard2000_initializeDac(struct comedi_device *dev)
 {
 	daqboard2000_dacDisarm(dev);
 }
@@ -717,7 +718,7 @@ static int daqboard2000_8255_cb(int dir, int port, int data,
 	return result;
 }
 
-static int daqboard2000_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int daqboard2000_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int result = 0;
 	struct comedi_subdevice *s;
@@ -772,7 +773,8 @@ static int daqboard2000_attach(struct comedi_device * dev, struct comedi_devconf
 		}
 	}
 
-	if ((result = comedi_pci_enable(card, "daqboard2000")) < 0) {
+	result = comedi_pci_enable(card, "daqboard2000");
+	if (result < 0) {
 		printk(" failed to enable PCI device and request regions\n");
 		return -EIO;
 	}
@@ -849,7 +851,7 @@ static int daqboard2000_attach(struct comedi_device * dev, struct comedi_devconf
 	return result;
 }
 
-static int daqboard2000_detach(struct comedi_device * dev)
+static int daqboard2000_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: daqboard2000: remove\n", dev->minor);
 
diff --git a/drivers/staging/comedi/drivers/das08.c b/drivers/staging/comedi/drivers/das08.c
index e4563331e96..c20cd8feb13 100644
--- a/drivers/staging/comedi/drivers/das08.c
+++ b/drivers/staging/comedi/drivers/das08.c
@@ -65,12 +65,12 @@ driver.
 #define PCI_DEVICE_ID_PCIDAS08 0x29
 #define PCIDAS08_SIZE 0x54
 
-// pci configuration registers
+/* pci configuration registers */
 #define INTCSR               0x4c
 #define   INTR1_ENABLE         0x1
 #define   INTR1_HIGH_POLARITY  0x2
 #define   PCI_INTR_ENABLE      0x40
-#define   INTR1_EDGE_TRIG      0x100	// requires high polarity
+#define   INTR1_EDGE_TRIG      0x100	/*  requires high polarity */
 #define CNTRL                0x50
 #define   CNTRL_DIR            0x2
 #define   CNTRL_INTR           0x4
@@ -154,20 +154,20 @@ driver.
 
 /* gainlist same as _pgx_ below */
 
-static int das08_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int das08_di_rbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int das08_do_wbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int das08jr_di_rbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int das08jr_do_wbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int das08jr_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int das08ao_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int das08_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int das08_di_rbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int das08_do_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int das08jr_di_rbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int das08jr_do_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int das08jr_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int das08ao_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 static void i8254_set_mode_low(unsigned int base, int channel,
 	unsigned int mode);
 
@@ -248,211 +248,211 @@ static const int *const das08_gainlists[] = {
 
 static const struct das08_board_struct das08_boards[] = {
 	{
-	      name:	"isa-das08",	// cio-das08.pdf
-	      bustype:	isa,
-	      ai:	das08_ai_rinsn,
-	      ai_nbits:12,
-	      ai_pg:	das08_pg_none,
-	      ai_encoding:das08_encode12,
-	      ao:	NULL,
-	      ao_nbits:12,
-	      di:	das08_di_rbits,
-	      do_:	das08_do_wbits,
-	      do_nchan:4,
-	      i8255_offset:8,
-	      i8254_offset:4,
-	      iosize:	16,	// unchecked
+	.name = "isa-das08",	/*  cio-das08.pdf */
+	.bustype = isa,
+	.ai = das08_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_pg = das08_pg_none,
+	.ai_encoding = das08_encode12,
+	.ao = NULL,
+	.ao_nbits = 12,
+	.di = das08_di_rbits,
+	.do_ = das08_do_wbits,
+	.do_nchan = 4,
+	.i8255_offset = 8,
+	.i8254_offset = 4,
+	.iosize = 16,	/*  unchecked */
 		},
 	{
-	      name:	"das08-pgm",	// cio-das08pgx.pdf
-	      bustype:	isa,
-	      ai:	das08_ai_rinsn,
-	      ai_nbits:12,
-	      ai_pg:	das08_pgm,
-	      ai_encoding:das08_encode12,
-	      ao:	NULL,
-	      di:	das08_di_rbits,
-	      do_:	das08_do_wbits,
-	      do_nchan:4,
-	      i8255_offset:0,
-	      i8254_offset:0x04,
-	      iosize:	16,	// unchecked
+	.name = "das08-pgm",	/*  cio-das08pgx.pdf */
+	.bustype = isa,
+	.ai = das08_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_pg = das08_pgm,
+	.ai_encoding = das08_encode12,
+	.ao = NULL,
+	.di = das08_di_rbits,
+	.do_ = das08_do_wbits,
+	.do_nchan = 4,
+	.i8255_offset = 0,
+	.i8254_offset = 0x04,
+	.iosize = 16,	/*  unchecked */
 		},
 	{
-	      name:	"das08-pgh",	// cio-das08pgx.pdf
-	      bustype:	isa,
-	      ai:	das08_ai_rinsn,
-	      ai_nbits:12,
-	      ai_pg:	das08_pgh,
-	      ai_encoding:das08_encode12,
-	      ao:	NULL,
-	      di:	das08_di_rbits,
-	      do_:	das08_do_wbits,
-	      do_nchan:4,
-	      i8255_offset:0,
-	      i8254_offset:0x04,
-	      iosize:	16,	// unchecked
+	.name = "das08-pgh",	/*  cio-das08pgx.pdf */
+	.bustype = isa,
+	.ai = das08_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_pg = das08_pgh,
+	.ai_encoding = das08_encode12,
+	.ao = NULL,
+	.di = das08_di_rbits,
+	.do_ = das08_do_wbits,
+	.do_nchan = 4,
+	.i8255_offset = 0,
+	.i8254_offset = 0x04,
+	.iosize = 16,	/*  unchecked */
 		},
 	{
-	      name:	"das08-pgl",	// cio-das08pgx.pdf
-	      bustype:	isa,
-	      ai:	das08_ai_rinsn,
-	      ai_nbits:12,
-	      ai_pg:	das08_pgl,
-	      ai_encoding:das08_encode12,
-	      ao:	NULL,
-	      di:	das08_di_rbits,
-	      do_:	das08_do_wbits,
-	      do_nchan:4,
-	      i8255_offset:0,
-	      i8254_offset:0x04,
-	      iosize:	16,	// unchecked
+	.name = "das08-pgl",	/*  cio-das08pgx.pdf */
+	.bustype = isa,
+	.ai = das08_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_pg = das08_pgl,
+	.ai_encoding = das08_encode12,
+	.ao = NULL,
+	.di = das08_di_rbits,
+	.do_ = das08_do_wbits,
+	.do_nchan = 4,
+	.i8255_offset = 0,
+	.i8254_offset = 0x04,
+	.iosize = 16,	/*  unchecked */
 		},
 	{
-	      name:	"das08-aoh",	// cio-das08_aox.pdf
-	      bustype:	isa,
-	      ai:	das08_ai_rinsn,
-	      ai_nbits:12,
-	      ai_pg:	das08_pgh,
-	      ai_encoding:das08_encode12,
-	      ao:	das08ao_ao_winsn,	// 8
-	      ao_nbits:12,
-	      di:	das08_di_rbits,
-	      do_:	das08_do_wbits,
-	      do_nchan:4,
-	      i8255_offset:0x0c,
-	      i8254_offset:0x04,
-	      iosize:	16,	// unchecked
+	.name = "das08-aoh",	/*  cio-das08_aox.pdf */
+	.bustype = isa,
+	.ai = das08_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_pg = das08_pgh,
+	.ai_encoding = das08_encode12,
+	.ao = das08ao_ao_winsn,	/*  8 */
+	.ao_nbits = 12,
+	.di = das08_di_rbits,
+	.do_ = das08_do_wbits,
+	.do_nchan = 4,
+	.i8255_offset = 0x0c,
+	.i8254_offset = 0x04,
+	.iosize = 16,	/*  unchecked */
 		},
 	{
-	      name:	"das08-aol",	// cio-das08_aox.pdf
-	      bustype:	isa,
-	      ai:	das08_ai_rinsn,
-	      ai_nbits:12,
-	      ai_pg:	das08_pgl,
-	      ai_encoding:das08_encode12,
-	      ao:	das08ao_ao_winsn,	// 8
-	      ao_nbits:12,
-	      di:	das08_di_rbits,
-	      do_:	das08_do_wbits,
-	      do_nchan:4,
-	      i8255_offset:0x0c,
-	      i8254_offset:0x04,
-	      iosize:	16,	// unchecked
+	.name = "das08-aol",	/*  cio-das08_aox.pdf */
+	.bustype = isa,
+	.ai = das08_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_pg = das08_pgl,
+	.ai_encoding = das08_encode12,
+	.ao = das08ao_ao_winsn,	/*  8 */
+	.ao_nbits = 12,
+	.di = das08_di_rbits,
+	.do_ = das08_do_wbits,
+	.do_nchan = 4,
+	.i8255_offset = 0x0c,
+	.i8254_offset = 0x04,
+	.iosize = 16,	/*  unchecked */
 		},
 	{
-	      name:	"das08-aom",	// cio-das08_aox.pdf
-	      bustype:	isa,
-	      ai:	das08_ai_rinsn,
-	      ai_nbits:12,
-	      ai_pg:	das08_pgm,
-	      ai_encoding:das08_encode12,
-	      ao:	das08ao_ao_winsn,	// 8
-	      ao_nbits:12,
-	      di:	das08_di_rbits,
-	      do_:	das08_do_wbits,
-	      do_nchan:4,
-	      i8255_offset:0x0c,
-	      i8254_offset:0x04,
-	      iosize:	16,	// unchecked
+	.name = "das08-aom",	/*  cio-das08_aox.pdf */
+	.bustype = isa,
+	.ai = das08_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_pg = das08_pgm,
+	.ai_encoding = das08_encode12,
+	.ao = das08ao_ao_winsn,	/*  8 */
+	.ao_nbits = 12,
+	.di = das08_di_rbits,
+	.do_ = das08_do_wbits,
+	.do_nchan = 4,
+	.i8255_offset = 0x0c,
+	.i8254_offset = 0x04,
+	.iosize = 16,	/*  unchecked */
 		},
 	{
-	      name:	"das08/jr-ao",	// cio-das08-jr-ao.pdf
-	      bustype:	isa,
-	      ai:	das08_ai_rinsn,
-	      ai_nbits:12,
-	      ai_pg:	das08_pg_none,
-	      ai_encoding:das08_encode12,
-	      ao:	das08jr_ao_winsn,
-	      ao_nbits:12,
-	      di:	das08jr_di_rbits,
-	      do_:	das08jr_do_wbits,
-	      do_nchan:8,
-	      i8255_offset:0,
-	      i8254_offset:0,
-	      iosize:	16,	// unchecked
+	.name = "das08/jr-ao",	/*  cio-das08-jr-ao.pdf */
+	.bustype = isa,
+	.ai = das08_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_pg = das08_pg_none,
+	.ai_encoding = das08_encode12,
+	.ao = das08jr_ao_winsn,
+	.ao_nbits = 12,
+	.di = das08jr_di_rbits,
+	.do_ = das08jr_do_wbits,
+	.do_nchan = 8,
+	.i8255_offset = 0,
+	.i8254_offset = 0,
+	.iosize = 16,	/*  unchecked */
 		},
 	{
-	      name:	"das08jr-16-ao",	// cio-das08jr-16-ao.pdf
-	      bustype:	isa,
-	      ai:	das08_ai_rinsn,
-	      ai_nbits:16,
-	      ai_pg:	das08_pg_none,
-	      ai_encoding:das08_encode12,
-	      ao:	das08jr_ao_winsn,
-	      ao_nbits:16,
-	      di:	das08jr_di_rbits,
-	      do_:	das08jr_do_wbits,
-	      do_nchan:8,
-	      i8255_offset:0,
-	      i8254_offset:0x04,
-	      iosize:	16,	// unchecked
+	.name = "das08jr-16-ao",	/*  cio-das08jr-16-ao.pdf */
+	.bustype = isa,
+	.ai = das08_ai_rinsn,
+	.ai_nbits = 16,
+	.ai_pg = das08_pg_none,
+	.ai_encoding = das08_encode12,
+	.ao = das08jr_ao_winsn,
+	.ao_nbits = 16,
+	.di = das08jr_di_rbits,
+	.do_ = das08jr_do_wbits,
+	.do_nchan = 8,
+	.i8255_offset = 0,
+	.i8254_offset = 0x04,
+	.iosize = 16,	/*  unchecked */
 		},
 #ifdef CONFIG_COMEDI_PCI
 	{
-	      name:	"das08",	// pci-das08
-	      id:	PCI_DEVICE_ID_PCIDAS08,
-	      bustype:	pci,
-	      ai:	das08_ai_rinsn,
-	      ai_nbits:12,
-	      ai_pg:	das08_bipolar5,
-	      ai_encoding:das08_encode12,
-	      ao:	NULL,
-	      ao_nbits:0,
-	      di:	das08_di_rbits,
-	      do_:	das08_do_wbits,
-	      do_nchan:4,
-	      i8255_offset:0,
-	      i8254_offset:4,
-	      iosize:	8,
+	.name = "das08",	/*  pci-das08 */
+	.id = PCI_DEVICE_ID_PCIDAS08,
+	.bustype = pci,
+	.ai = das08_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_pg = das08_bipolar5,
+	.ai_encoding = das08_encode12,
+	.ao = NULL,
+	.ao_nbits = 0,
+	.di = das08_di_rbits,
+	.do_ = das08_do_wbits,
+	.do_nchan = 4,
+	.i8255_offset = 0,
+	.i8254_offset = 4,
+	.iosize = 8,
 		},
 #endif
 	{
-	      name:	"pc104-das08",
-	      bustype:	pc104,
-	      ai:	das08_ai_rinsn,
-	      ai_nbits:12,
-	      ai_pg:	das08_pg_none,
-	      ai_encoding:das08_encode12,
-	      ao:	NULL,
-	      ao_nbits:0,
-	      di:	das08_di_rbits,
-	      do_:	das08_do_wbits,
-	      do_nchan:4,
-	      i8255_offset:0,
-	      i8254_offset:4,
-	      iosize:	16,	// unchecked
+	.name = "pc104-das08",
+	.bustype = pc104,
+	.ai = das08_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_pg = das08_pg_none,
+	.ai_encoding = das08_encode12,
+	.ao = NULL,
+	.ao_nbits = 0,
+	.di = das08_di_rbits,
+	.do_ = das08_do_wbits,
+	.do_nchan = 4,
+	.i8255_offset = 0,
+	.i8254_offset = 4,
+	.iosize = 16,	/*  unchecked */
 		},
 #if 0
 	{
-	      name:	"das08/f",
+	.name = "das08/f",
 		},
 	{
-	      name:	"das08jr",
+	.name = "das08jr",
 		},
 #endif
 	{
-	      name:	"das08jr/16",
-	      bustype:	isa,
-	      ai:	das08_ai_rinsn,
-	      ai_nbits:16,
-	      ai_pg:	das08_pg_none,
-	      ai_encoding:das08_encode16,
-	      ao:	NULL,
-	      ao_nbits:0,
-	      di:	das08jr_di_rbits,
-	      do_:	das08jr_do_wbits,
-	      do_nchan:8,
-	      i8255_offset:0,
-	      i8254_offset:0,
-	      iosize:	16,	// unchecked
+	.name = "das08jr/16",
+	.bustype = isa,
+	.ai = das08_ai_rinsn,
+	.ai_nbits = 16,
+	.ai_pg = das08_pg_none,
+	.ai_encoding = das08_encode16,
+	.ao = NULL,
+	.ao_nbits = 0,
+	.di = das08jr_di_rbits,
+	.do_ = das08jr_do_wbits,
+	.do_nchan = 8,
+	.i8255_offset = 0,
+	.i8254_offset = 0,
+	.iosize = 16,	/*  unchecked */
 		},
 #if 0
 	{
-	      name:	"das48-pga",	// cio-das48-pga.pdf
+	.name = "das48-pga",	/*  cio-das48-pga.pdf */
 		},
 	{
-	      name:	"das08-pga-g2",	// a KM board
+	.name = "das08-pga-g2",	/*  a KM board */
 		},
 #endif
 };
@@ -460,39 +460,39 @@ static const struct das08_board_struct das08_boards[] = {
 #ifdef CONFIG_COMEDI_PCMCIA
 struct das08_board_struct das08_cs_boards[NUM_DAS08_CS_BOARDS] = {
 	{
-	      name:	"pcm-das08",
-	      id:	0x0,	// XXX
-	      bustype:	pcmcia,
-	      ai:	das08_ai_rinsn,
-	      ai_nbits:12,
-	      ai_pg:	das08_bipolar5,
-	      ai_encoding:das08_pcm_encode12,
-	      ao:	NULL,
-	      ao_nbits:0,
-	      di:	das08_di_rbits,
-	      do_:	das08_do_wbits,
-	      do_nchan:3,
-	      i8255_offset:0,
-	      i8254_offset:0,
-	      iosize:	16,
+	.name = "pcm-das08",
+	.id = 0x0,	/*  XXX */
+	.bustype = pcmcia,
+	.ai = das08_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_pg = das08_bipolar5,
+	.ai_encoding = das08_pcm_encode12,
+	.ao = NULL,
+	.ao_nbits = 0,
+	.di = das08_di_rbits,
+	.do_ = das08_do_wbits,
+	.do_nchan = 3,
+	.i8255_offset = 0,
+	.i8254_offset = 0,
+	.iosize = 16,
 		},
-	// duplicate so driver name can be used also
+	/*  duplicate so driver name can be used also */
 	{
-	      name:	"das08_cs",
-	      id:	0x0,	// XXX
-	      bustype:	pcmcia,
-	      ai:	das08_ai_rinsn,
-	      ai_nbits:12,
-	      ai_pg:	das08_bipolar5,
-	      ai_encoding:das08_pcm_encode12,
-	      ao:	NULL,
-	      ao_nbits:0,
-	      di:	das08_di_rbits,
-	      do_:	das08_do_wbits,
-	      do_nchan:3,
-	      i8255_offset:0,
-	      i8254_offset:0,
-	      iosize:	16,
+	.name = "das08_cs",
+	.id = 0x0,	/*  XXX */
+	.bustype = pcmcia,
+	.ai = das08_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_pg = das08_bipolar5,
+	.ai_encoding = das08_pcm_encode12,
+	.ao = NULL,
+	.ao_nbits = 0,
+	.di = das08_di_rbits,
+	.do_ = das08_do_wbits,
+	.do_nchan = 3,
+	.i8255_offset = 0,
+	.i8254_offset = 0,
+	.iosize = 16,
 		},
 };
 #endif
@@ -512,8 +512,8 @@ MODULE_DEVICE_TABLE(pci, das08_pci_table);
 
 #define TIMEOUT 100000
 
-static int das08_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das08_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i, n;
 	int chan;
@@ -528,7 +528,7 @@ static int das08_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice *
 	inb(dev->iobase + DAS08_MSB);
 
 	/* set multiplexer */
-	spin_lock(&dev->spinlock);	// lock to prevent race with digital output
+	spin_lock(&dev->spinlock);	/*  lock to prevent race with digital output */
 	devpriv->do_mux_bits &= ~DAS08_MUX_MASK;
 	devpriv->do_mux_bits |= DAS08_MUX(chan);
 	outb(devpriv->do_mux_bits, dev->iobase + DAS08_CONTROL);
@@ -545,7 +545,7 @@ static int das08_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice *
 		/* clear over-range bits for 16-bit boards */
 		if (thisboard->ai_nbits == 16)
 			if (inb(dev->iobase + DAS08_MSB) & 0x80)
-				rt_printk("das08: over-range\n");
+				printk("das08: over-range\n");
 
 		/* trigger conversion */
 		outb_p(0, dev->iobase + DAS08_TRIG_12BIT);
@@ -555,7 +555,7 @@ static int das08_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice *
 				break;
 		}
 		if (i == TIMEOUT) {
-			rt_printk("das08: timeout\n");
+			printk("das08: timeout\n");
 			return -ETIME;
 		}
 		msb = inb(dev->iobase + DAS08_MSB);
@@ -579,8 +579,8 @@ static int das08_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice *
 	return n;
 }
 
-static int das08_di_rbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das08_di_rbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	data[0] = 0;
 	data[1] = DAS08_IP(inb(dev->iobase + DAS08_STATUS));
@@ -588,19 +588,19 @@ static int das08_di_rbits(struct comedi_device * dev, struct comedi_subdevice *
 	return 2;
 }
 
-static int das08_do_wbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das08_do_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int wbits;
 
-	// get current settings of digital output lines
+	/*  get current settings of digital output lines */
 	wbits = (devpriv->do_mux_bits >> 4) & 0xf;
-	// null bits we are going to set
+	/*  null bits we are going to set */
 	wbits &= ~data[0];
-	// set new bit values
+	/*  set new bit values */
 	wbits |= data[0] & data[1];
-	// remember digital output bits
-	spin_lock(&dev->spinlock);	// prevent race with setting of analog input mux
+	/*  remember digital output bits */
+	spin_lock(&dev->spinlock);	/*  prevent race with setting of analog input mux */
 	devpriv->do_mux_bits &= ~DAS08_DO_MASK;
 	devpriv->do_mux_bits |= DAS08_OP(wbits);
 	outb(devpriv->do_mux_bits, dev->iobase + DAS08_CONTROL);
@@ -611,8 +611,8 @@ static int das08_do_wbits(struct comedi_device * dev, struct comedi_subdevice *
 	return 2;
 }
 
-static int das08jr_di_rbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das08jr_di_rbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	data[0] = 0;
 	data[1] = inb(dev->iobase + DAS08JR_DIO);
@@ -620,12 +620,12 @@ static int das08jr_di_rbits(struct comedi_device * dev, struct comedi_subdevice
 	return 2;
 }
 
-static int das08jr_do_wbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das08jr_do_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	// null bits we are going to set
+	/*  null bits we are going to set */
 	devpriv->do_bits &= ~data[0];
-	// set new bit values
+	/*  set new bit values */
 	devpriv->do_bits |= data[0] & data[1];
 	outb(devpriv->do_bits, dev->iobase + DAS08JR_DIO);
 
@@ -634,8 +634,8 @@ static int das08jr_do_wbits(struct comedi_device * dev, struct comedi_subdevice
 	return 2;
 }
 
-static int das08jr_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das08jr_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n;
 	int lsb, msb;
@@ -668,8 +668,8 @@ static int das08jr_ao_winsn(struct comedi_device * dev, struct comedi_subdevice
  * a different method to force an update.
  *
  */
-static int das08ao_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das08ao_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n;
 	int lsb, msb;
@@ -782,31 +782,31 @@ static unsigned int i8254_read_status(struct i8254_struct *st, int channel)
 	return i8254_read_status_low(st->iobase, chan);
 }
 
-static int das08_counter_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das08_counter_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int chan = insn->chanspec;
 
-	//printk("Reading counter channel %d ",chan);
+	/* printk("Reading counter channel %d ",chan); */
 	data[0] = i8254_read_channel(&devpriv->i8254, chan);
-	//printk("=> 0x%08X\n",data[0]);
+	/* printk("=> 0x%08X\n",data[0]); */
 
 	return 1;
 }
 
-static int das08_counter_write(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das08_counter_write(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int chan = insn->chanspec;
 
-	//printk("Writing counter channel %d with 0x%04X\n",chan,data[0]);
+	/* printk("Writing counter channel %d with 0x%04X\n",chan,data[0]); */
 	i8254_write_channel(&devpriv->i8254, chan, data[0]);
 
 	return 1;
 }
 
-static int das08_counter_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das08_counter_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int chan = insn->chanspec;
 
@@ -827,25 +827,25 @@ static int das08_counter_config(struct comedi_device * dev, struct comedi_subdev
 	return 2;
 }
 
-static int das08_attach(struct comedi_device * dev, struct comedi_devconfig * it);
+static int das08_attach(struct comedi_device *dev, struct comedi_devconfig *it);
 
 static struct comedi_driver driver_das08 = {
-      driver_name: DRV_NAME,
-      module:THIS_MODULE,
-      attach:das08_attach,
-      detach:das08_common_detach,
-      board_name:&das08_boards[0].name,
-      num_names:sizeof(das08_boards) /
+	.driver_name = DRV_NAME,
+	.module = THIS_MODULE,
+	.attach = das08_attach,
+	.detach = das08_common_detach,
+	.board_name = &das08_boards[0].name,
+	.num_names = sizeof(das08_boards) /
 		sizeof(struct das08_board_struct),
-      offset:sizeof(struct das08_board_struct),
+	.offset = sizeof(struct das08_board_struct),
 };
 
-int das08_common_attach(struct comedi_device * dev, unsigned long iobase)
+int das08_common_attach(struct comedi_device *dev, unsigned long iobase)
 {
 	struct comedi_subdevice *s;
 	int ret;
 
-	// allocate ioports for non-pcmcia, non-pci boards
+	/*  allocate ioports for non-pcmcia, non-pci boards */
 	if ((thisboard->bustype != pcmcia) && (thisboard->bustype != pci)) {
 		printk(" iobase 0x%lx\n", iobase);
 		if (!request_region(iobase, thisboard->iosize, DRV_NAME)) {
@@ -857,7 +857,8 @@ int das08_common_attach(struct comedi_device * dev, unsigned long iobase)
 
 	dev->board_name = thisboard->name;
 
-	if ((ret = alloc_subdevices(dev, 6)) < 0)
+	ret = alloc_subdevices(dev, 6);
+	if (ret < 0)
 		return ret;
 
 	s = dev->subdevices + 0;
@@ -880,7 +881,7 @@ int das08_common_attach(struct comedi_device * dev, unsigned long iobase)
 	/* ao */
 	if (thisboard->ao) {
 		s->type = COMEDI_SUBD_AO;
-// XXX lacks read-back insn
+/* XXX lacks read-back insn */
 		s->subdev_flags = SDF_WRITABLE;
 		s->n_chan = 2;
 		s->maxdata = (1 << thisboard->ao_nbits) - 1;
@@ -952,7 +953,7 @@ int das08_common_attach(struct comedi_device * dev, unsigned long iobase)
 	return 0;
 }
 
-static int das08_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int das08_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int ret;
 	unsigned long iobase;
@@ -961,11 +962,12 @@ static int das08_attach(struct comedi_device * dev, struct comedi_devconfig * it
 	struct pci_dev *pdev;
 #endif
 
-	if ((ret = alloc_private(dev, sizeof(struct das08_private_struct))) < 0)
+	ret = alloc_private(dev, sizeof(struct das08_private_struct));
+	if (ret < 0)
 		return ret;
 
 	printk("comedi%d: das08: ", dev->minor);
-	// deal with a pci board
+	/*  deal with a pci board */
 	if (thisboard->bustype == pci) {
 #ifdef CONFIG_COMEDI_PCI
 		if (it->options[0] || it->options[1]) {
@@ -973,7 +975,7 @@ static int das08_attach(struct comedi_device * dev, struct comedi_devconfig * it
 				it->options[0], it->options[1]);
 		}
 		printk("\n");
-		// find card
+		/*  find card */
 		for (pdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
 			pdev != NULL;
 			pdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pdev)) {
@@ -995,12 +997,12 @@ static int das08_attach(struct comedi_device * dev, struct comedi_devconfig * it
 			return -EIO;
 		}
 		devpriv->pdev = pdev;
-		// enable PCI device and reserve I/O spaces
+		/*  enable PCI device and reserve I/O spaces */
 		if (comedi_pci_enable(pdev, DRV_NAME)) {
 			printk(" Error enabling PCI device and requesting regions\n");
 			return -EIO;
 		}
-		// read base addresses
+		/*  read base addresses */
 		pci_iobase = pci_resource_start(pdev, 1);
 		iobase = pci_resource_start(pdev, 2);
 		printk("pcibase 0x%lx  iobase 0x%lx\n", pci_iobase, iobase);
@@ -1028,14 +1030,14 @@ static int das08_attach(struct comedi_device * dev, struct comedi_devconfig * it
 	return das08_common_attach(dev, iobase);
 }
 
-int das08_common_detach(struct comedi_device * dev)
+int das08_common_detach(struct comedi_device *dev)
 {
 	printk(KERN_INFO "comedi%d: das08: remove\n", dev->minor);
 
 	if (dev->subdevices)
 		subdev_8255_cleanup(dev, dev->subdevices + 4);
 
-	// deallocate ioports for non-pcmcia, non-pci boards
+	/*  deallocate ioports for non-pcmcia, non-pci boards */
 	if ((thisboard->bustype != pcmcia) && (thisboard->bustype != pci)) {
 		if (dev->iobase)
 			release_region(dev->iobase, thisboard->iosize);
diff --git a/drivers/staging/comedi/drivers/das08.h b/drivers/staging/comedi/drivers/das08.h
index 69089ce690f..7cdb3fc4dae 100644
--- a/drivers/staging/comedi/drivers/das08.h
+++ b/drivers/staging/comedi/drivers/das08.h
@@ -25,14 +25,14 @@
 #define _DAS08_H
 
 enum das08_bustype { isa, pci, pcmcia, pc104 };
-// different ways ai data is encoded in first two registers
+/* different ways ai data is encoded in first two registers */
 enum das08_ai_encoding { das08_encode12, das08_encode16, das08_pcm_encode12 };
 enum das08_lrange { das08_pg_none, das08_bipolar5, das08_pgh, das08_pgl,
 		das08_pgm };
 
 struct das08_board_struct {
 	const char *name;
-	unsigned int id;	// id for pci/pcmcia boards
+	unsigned int id;	/*  id for pci/pcmcia boards */
 	enum das08_bustype bustype;
 	void *ai;
 	unsigned int ai_nbits;
@@ -45,13 +45,13 @@ struct das08_board_struct {
 	unsigned int do_nchan;
 	unsigned int i8255_offset;
 	unsigned int i8254_offset;
-	unsigned int iosize;	// number of ioports used
+	unsigned int iosize;	/*  number of ioports used */
 };
 
 struct i8254_struct {
-	int channels;		// available channels. Some could be used internally.
-	int logic2phys[3];	// to know which physical channel is.
-	int mode[3];		// the index is the real counter.
+	int channels;		/*  available channels. Some could be used internally. */
+	int logic2phys[3];	/*  to know which physical channel is. */
+	int mode[3];		/*  the index is the real counter. */
 	unsigned int iobase;
 };
 
@@ -61,18 +61,18 @@ struct i8254_struct {
 #define I8254_CTRL 3
 
 struct das08_private_struct {
-	unsigned int do_mux_bits;	// bits for do/mux register on boards without seperate do register
-	unsigned int do_bits;	// bits for do register on boards with register dedicated to digital out only
+	unsigned int do_mux_bits;	/*  bits for do/mux register on boards without seperate do register */
+	unsigned int do_bits;	/*  bits for do register on boards with register dedicated to digital out only */
 	const unsigned int *pg_gainlist;
-	struct pci_dev *pdev;	// struct for pci-das08
-	unsigned int pci_iobase;	// additional base address for pci-das08
+	struct pci_dev *pdev;	/*  struct for pci-das08 */
+	unsigned int pci_iobase;	/*  additional base address for pci-das08 */
 	struct i8254_struct i8254;
 };
 
 #define NUM_DAS08_CS_BOARDS 2
 extern struct das08_board_struct das08_cs_boards[NUM_DAS08_CS_BOARDS];
 
-int das08_common_attach(struct comedi_device * dev, unsigned long iobase);
-int das08_common_detach(struct comedi_device * dev);
+int das08_common_attach(struct comedi_device *dev, unsigned long iobase);
+int das08_common_detach(struct comedi_device *dev);
 
 #endif /* _DAS08_H */
diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c
index be6c88788c4..8e4464100e1 100644
--- a/drivers/staging/comedi/drivers/das08_cs.c
+++ b/drivers/staging/comedi/drivers/das08_cs.c
@@ -46,7 +46,7 @@ Command support does not exist, but could be added for this board.
 
 #include "das08.h"
 
-// pcmcia includes
+/* pcmcia includes */
 #include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
@@ -56,30 +56,31 @@ static struct pcmcia_device *cur_dev = NULL;
 
 #define thisboard ((const struct das08_board_struct *)dev->board_ptr)
 
-static int das08_cs_attach(struct comedi_device * dev, struct comedi_devconfig * it);
+static int das08_cs_attach(struct comedi_device *dev, struct comedi_devconfig *it);
 
 static struct comedi_driver driver_das08_cs = {
-      driver_name:"das08_cs",
-      module:THIS_MODULE,
-      attach:das08_cs_attach,
-      detach:das08_common_detach,
-      board_name:&das08_cs_boards[0].name,
-      num_names:sizeof(das08_cs_boards) /
+	.driver_name = "das08_cs",
+	.module = THIS_MODULE,
+	.attach = das08_cs_attach,
+	.detach = das08_common_detach,
+	.board_name = &das08_cs_boards[0].name,
+	.num_names = sizeof(das08_cs_boards) /
 		sizeof(struct das08_board_struct),
-      offset:sizeof(struct das08_board_struct),
+	.offset = sizeof(struct das08_board_struct),
 };
 
-static int das08_cs_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int das08_cs_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int ret;
 	unsigned long iobase;
-	struct pcmcia_device *link = cur_dev;	// XXX hack
+	struct pcmcia_device *link = cur_dev;	/*  XXX hack */
 
-	if ((ret = alloc_private(dev, sizeof(struct das08_private_struct))) < 0)
+	ret = alloc_private(dev, sizeof(struct das08_private_struct));
+	if (ret < 0)
 		return ret;
 
 	printk("comedi%d: das08_cs: ", dev->minor);
-	// deal with a pci board
+	/*  deal with a pci board */
 
 	if (thisboard->bustype == pcmcia) {
 		if (link == NULL) {
@@ -264,14 +265,23 @@ static void das08_pcmcia_config(struct pcmcia_device *link)
 	tuple.TupleDataMax = sizeof(buf);
 	tuple.TupleOffset = 0;
 	last_fn = GetFirstTuple;
-	if ((last_ret = pcmcia_get_first_tuple(link, &tuple)) != 0)
+
+	last_ret = pcmcia_get_first_tuple(link, &tuple);
+	if (last_ret)
 		goto cs_failed;
+
 	last_fn = GetTupleData;
-	if ((last_ret = pcmcia_get_tuple_data(link, &tuple)) != 0)
+
+	last_ret = pcmcia_get_tuple_data(link, &tuple);
+	if (last_ret)
 		goto cs_failed;
+
 	last_fn = ParseTuple;
-	if ((last_ret = pcmcia_parse_tuple(&tuple, &parse)) != 0)
+
+	last_ret = pcmcia_parse_tuple(&tuple, &parse);
+	if (last_ret)
 		goto cs_failed;
+
 	link->conf.ConfigBase = parse.config.base;
 	link->conf.Present = parse.config.rmask[0];
 
@@ -289,13 +299,20 @@ static void das08_pcmcia_config(struct pcmcia_device *link)
 	 */
 	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
 	last_fn = GetFirstTuple;
-	if ((last_ret = pcmcia_get_first_tuple(link, &tuple)) != 0)
+
+	last_ret = pcmcia_get_first_tuple(link, &tuple);
+	if (last_ret)
 		goto cs_failed;
+
 	while (1) {
 		cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
-		if ((last_ret = pcmcia_get_tuple_data(link, &tuple)) != 0)
+
+		last_ret = pcmcia_get_tuple_data(link, &tuple);
+		if (last_ret)
 			goto next_entry;
-		if ((last_ret = pcmcia_parse_tuple(&tuple, &parse)) != 0)
+
+		last_ret = pcmcia_parse_tuple(&tuple, &parse);
+		if (last_ret)
 			goto next_entry;
 
 		if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
@@ -341,13 +358,16 @@ static void das08_pcmcia_config(struct pcmcia_device *link)
 
 	      next_entry:
 		last_fn = GetNextTuple;
-		if ((last_ret = pcmcia_get_next_tuple(link, &tuple)) != 0)
+
+		last_ret = pcmcia_get_next_tuple(link, &tuple);
+		if (last_ret)
 			goto cs_failed;
 	}
 
 	if (link->conf.Attributes & CONF_ENABLE_IRQ) {
 		last_fn = RequestIRQ;
-		if ((last_ret = pcmcia_request_irq(link, &link->irq)) != 0)
+		last_ret = pcmcia_request_irq(link, &link->irq);
+		if (last_ret)
 			goto cs_failed;
 	}
 
@@ -357,7 +377,8 @@ static void das08_pcmcia_config(struct pcmcia_device *link)
 	   card and host interface into "Memory and IO" mode.
 	 */
 	last_fn = RequestConfiguration;
-	if ((last_ret = pcmcia_request_configuration(link, &link->conf)) != 0)
+	last_ret = pcmcia_request_configuration(link, &link->conf);
+	if (last_ret)
 		goto cs_failed;
 
 	/*
diff --git a/drivers/staging/comedi/drivers/das16.c b/drivers/staging/comedi/drivers/das16.c
index 6b6b042099d..59af86a8bbf 100644
--- a/drivers/staging/comedi/drivers/das16.c
+++ b/drivers/staging/comedi/drivers/das16.c
@@ -79,6 +79,7 @@ Computer boards manuals also available from their website www.measurementcomputi
 */
 
 #include <linux/pci.h>
+#include <linux/interrupt.h>
 #include <asm/dma.h>
 #include "../comedidev.h"
 
@@ -87,16 +88,16 @@ Computer boards manuals also available from their website www.measurementcomputi
 #include "comedi_fc.h"
 
 #undef DEBUG
-//#define DEBUG
+/* #define DEBUG */
 
 #ifdef DEBUG
-#define DEBUG_PRINT(format, args...) rt_printk("das16: " format, ## args)
+#define DEBUG_PRINT(format, args...) printk("das16: " format, ## args)
 #else
 #define DEBUG_PRINT(format, args...)
 #endif
 
-#define DAS16_SIZE 20		// number of ioports
-#define DAS16_DMA_SIZE 0xff00	// size in bytes of allocated dma buffer
+#define DAS16_SIZE 20		/*  number of ioports */
+#define DAS16_DMA_SIZE 0xff00	/*  size in bytes of allocated dma buffer */
 
 /*
     cio-das16.pdf
@@ -184,7 +185,7 @@ Computer boards manuals also available from their website www.measurementcomputi
 
 */
 
-static const int sample_size = 2;	// size in bytes of a sample from board
+static const int sample_size = 2;	/*  size in bytes of a sample from board */
 
 #define DAS16_TRIG		0
 #define DAS16_AI_LSB		0
@@ -265,7 +266,7 @@ static const struct comedi_lrange range_das1x02_unip = { 4, {
 	}
 };
 static const struct comedi_lrange range_das16jr = { 9, {
-			// also used by 16/330
+			/*  also used by 16/330 */
 			BIP_RANGE(10),
 			BIP_RANGE(5),
 			BIP_RANGE(2.5),
@@ -326,40 +327,40 @@ struct munge_info {
 	unsigned have_byte:1;
 };
 
-static int das16_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int das16_do_wbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int das16_di_rbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int das16_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-
-static int das16_cmd_test(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd);
-static int das16_cmd_exec(struct comedi_device * dev, struct comedi_subdevice * s);
-static int das16_cancel(struct comedi_device * dev, struct comedi_subdevice * s);
-static void das16_ai_munge(struct comedi_device * dev, struct comedi_subdevice * s,
+static int das16_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int das16_do_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int das16_di_rbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int das16_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+
+static int das16_cmd_test(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd);
+static int das16_cmd_exec(struct comedi_device *dev, struct comedi_subdevice *s);
+static int das16_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
+static void das16_ai_munge(struct comedi_device *dev, struct comedi_subdevice *s,
 	void *array, unsigned int num_bytes, unsigned int start_chan_index);
 
-static void das16_reset(struct comedi_device * dev);
-static irqreturn_t das16_dma_interrupt(int irq, void *d PT_REGS_ARG);
+static void das16_reset(struct comedi_device *dev);
+static irqreturn_t das16_dma_interrupt(int irq, void *d);
 static void das16_timer_interrupt(unsigned long arg);
-static void das16_interrupt(struct comedi_device * dev);
+static void das16_interrupt(struct comedi_device *dev);
 
-static unsigned int das16_set_pacer(struct comedi_device * dev, unsigned int ns,
+static unsigned int das16_set_pacer(struct comedi_device *dev, unsigned int ns,
 	int flags);
-static int das1600_mode_detect(struct comedi_device * dev);
-static unsigned int das16_suggest_transfer_size(struct comedi_device * dev,
+static int das1600_mode_detect(struct comedi_device *dev);
+static unsigned int das16_suggest_transfer_size(struct comedi_device *dev,
 	struct comedi_cmd cmd);
 
-static void reg_dump(struct comedi_device * dev);
+static void reg_dump(struct comedi_device *dev);
 
 struct das16_board {
 	const char *name;
 	void *ai;
 	unsigned int ai_nbits;
-	unsigned int ai_speed;	// max conversion speed in nanosec
+	unsigned int ai_speed;	/*  max conversion speed in nanosec */
 	unsigned int ai_pg;
 	void *ao;
 	unsigned int ao_nbits;
@@ -375,339 +376,337 @@ struct das16_board {
 
 static const struct das16_board das16_boards[] = {
 	{
-	      name:	"das-16",
-	      ai:	das16_ai_rinsn,
-	      ai_nbits:12,
-	      ai_speed:15000,
-	      ai_pg:	das16_pg_none,
-	      ao:	das16_ao_winsn,
-	      ao_nbits:12,
-	      di:	das16_di_rbits,
-	      do_:	das16_do_wbits,
-	      i8255_offset:0x10,
-	      i8254_offset:0x0c,
-	      size:	0x14,
-	      id:	0x00,
+	.name = "das-16",
+	.ai = das16_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_speed = 15000,
+	.ai_pg = das16_pg_none,
+	.ao = das16_ao_winsn,
+	.ao_nbits = 12,
+	.di = das16_di_rbits,
+	.do_ = das16_do_wbits,
+	.i8255_offset = 0x10,
+	.i8254_offset = 0x0c,
+	.size = 0x14,
+	.id = 0x00,
 		},
 	{
-	      name:	"das-16g",
-	      ai:	das16_ai_rinsn,
-	      ai_nbits:12,
-	      ai_speed:15000,
-	      ai_pg:	das16_pg_none,
-	      ao:	das16_ao_winsn,
-	      ao_nbits:12,
-	      di:	das16_di_rbits,
-	      do_:	das16_do_wbits,
-	      i8255_offset:0x10,
-	      i8254_offset:0x0c,
-	      size:	0x14,
-	      id:	0x00,
+	.name = "das-16g",
+	.ai = das16_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_speed = 15000,
+	.ai_pg = das16_pg_none,
+	.ao = das16_ao_winsn,
+	.ao_nbits = 12,
+	.di = das16_di_rbits,
+	.do_ = das16_do_wbits,
+	.i8255_offset = 0x10,
+	.i8254_offset = 0x0c,
+	.size = 0x14,
+	.id = 0x00,
 		},
 	{
-	      name:	"das-16f",
-	      ai:	das16_ai_rinsn,
-	      ai_nbits:12,
-	      ai_speed:8500,
-	      ai_pg:	das16_pg_none,
-	      ao:	das16_ao_winsn,
-	      ao_nbits:12,
-	      di:	das16_di_rbits,
-	      do_:	das16_do_wbits,
-	      i8255_offset:0x10,
-	      i8254_offset:0x0c,
-	      size:	0x14,
-	      id:	0x00,
+	.name = "das-16f",
+	.ai = das16_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_speed = 8500,
+	.ai_pg = das16_pg_none,
+	.ao = das16_ao_winsn,
+	.ao_nbits = 12,
+	.di = das16_di_rbits,
+	.do_ = das16_do_wbits,
+	.i8255_offset = 0x10,
+	.i8254_offset = 0x0c,
+	.size = 0x14,
+	.id = 0x00,
 		},
 	{
-	      name:	"cio-das16",	// cio-das16.pdf
-	      ai:	das16_ai_rinsn,
-	      ai_nbits:12,
-	      ai_speed:20000,
-	      ai_pg:	das16_pg_none,
-	      ao:	das16_ao_winsn,
-	      ao_nbits:12,
-	      di:	das16_di_rbits,
-	      do_:	das16_do_wbits,
-	      i8255_offset:0x10,
-	      i8254_offset:0x0c,
-	      size:	0x14,
-	      id:	0x80,
+	.name = "cio-das16",	/*  cio-das16.pdf */
+	.ai = das16_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_speed = 20000,
+	.ai_pg = das16_pg_none,
+	.ao = das16_ao_winsn,
+	.ao_nbits = 12,
+	.di = das16_di_rbits,
+	.do_ = das16_do_wbits,
+	.i8255_offset = 0x10,
+	.i8254_offset = 0x0c,
+	.size = 0x14,
+	.id = 0x80,
 		},
 	{
-	      name:	"cio-das16/f",	// das16.pdf
-	      ai:	das16_ai_rinsn,
-	      ai_nbits:12,
-	      ai_speed:10000,
-	      ai_pg:	das16_pg_none,
-	      ao:	das16_ao_winsn,
-	      ao_nbits:12,
-	      di:	das16_di_rbits,
-	      do_:	das16_do_wbits,
-	      i8255_offset:0x10,
-	      i8254_offset:0x0c,
-	      size:	0x14,
-	      id:	0x80,
+	.name = "cio-das16/f",	/*  das16.pdf */
+	.ai = das16_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_speed = 10000,
+	.ai_pg = das16_pg_none,
+	.ao = das16_ao_winsn,
+	.ao_nbits = 12,
+	.di = das16_di_rbits,
+	.do_ = das16_do_wbits,
+	.i8255_offset = 0x10,
+	.i8254_offset = 0x0c,
+	.size = 0x14,
+	.id = 0x80,
 		},
 	{
-	      name:	"cio-das16/jr",	// cio-das16jr.pdf
-	      ai:	das16_ai_rinsn,
-	      ai_nbits:12,
-	      ai_speed:7692,
-	      ai_pg:	das16_pg_16jr,
-	      ao:	NULL,
-	      di:	das16_di_rbits,
-	      do_:	das16_do_wbits,
-	      i8255_offset:0,
-	      i8254_offset:0x0c,
-	      size:	0x10,
-	      id:	0x00,
+	.name = "cio-das16/jr",	/*  cio-das16jr.pdf */
+	.ai = das16_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_speed = 7692,
+	.ai_pg = das16_pg_16jr,
+	.ao = NULL,
+	.di = das16_di_rbits,
+	.do_ = das16_do_wbits,
+	.i8255_offset = 0,
+	.i8254_offset = 0x0c,
+	.size = 0x10,
+	.id = 0x00,
 		},
 	{
-	      name:	"pc104-das16jr",	// pc104-das16jr_xx.pdf
-	      ai:	das16_ai_rinsn,
-	      ai_nbits:12,
-	      ai_speed:3300,
-	      ai_pg:	das16_pg_16jr,
-	      ao:	NULL,
-	      di:	das16_di_rbits,
-	      do_:	das16_do_wbits,
-	      i8255_offset:0,
-	      i8254_offset:0x0c,
-	      size:	0x10,
-	      id:	0x00,
+	.name = "pc104-das16jr",	/*  pc104-das16jr_xx.pdf */
+	.ai = das16_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_speed = 3300,
+	.ai_pg = das16_pg_16jr,
+	.ao = NULL,
+	.di = das16_di_rbits,
+	.do_ = das16_do_wbits,
+	.i8255_offset = 0,
+	.i8254_offset = 0x0c,
+	.size = 0x10,
+	.id = 0x00,
 		},
 	{
-	      name:	"cio-das16jr/16",	// cio-das16jr_16.pdf
-	      ai:	das16_ai_rinsn,
-	      ai_nbits:16,
-	      ai_speed:10000,
-	      ai_pg:	das16_pg_16jr_16,
-	      ao:	NULL,
-	      di:	das16_di_rbits,
-	      do_:	das16_do_wbits,
-	      i8255_offset:0,
-	      i8254_offset:0x0c,
-	      size:	0x10,
-	      id:	0x00,
+	.name = "cio-das16jr/16",	/*  cio-das16jr_16.pdf */
+	.ai = das16_ai_rinsn,
+	.ai_nbits = 16,
+	.ai_speed = 10000,
+	.ai_pg = das16_pg_16jr_16,
+	.ao = NULL,
+	.di = das16_di_rbits,
+	.do_ = das16_do_wbits,
+	.i8255_offset = 0,
+	.i8254_offset = 0x0c,
+	.size = 0x10,
+	.id = 0x00,
 		},
 	{
-	      name:	"pc104-das16jr/16",	// pc104-das16jr_xx.pdf
-	      ai:	das16_ai_rinsn,
-	      ai_nbits:16,
-	      ai_speed:10000,
-	      ai_pg:	das16_pg_16jr_16,
-	      ao:	NULL,
-	      di:	das16_di_rbits,
-	      do_:	das16_do_wbits,
-	      i8255_offset:0,
-	      i8254_offset:0x0c,
-	      size:	0x10,
-	      id:	0x00,
+	.name = "pc104-das16jr/16",	/*  pc104-das16jr_xx.pdf */
+	.ai = das16_ai_rinsn,
+	.ai_nbits = 16,
+	.ai_speed = 10000,
+	.ai_pg = das16_pg_16jr_16,
+	.ao = NULL,
+	.di = das16_di_rbits,
+	.do_ = das16_do_wbits,
+	.i8255_offset = 0,
+	.i8254_offset = 0x0c,
+	.size = 0x10,
+	.id = 0x00,
 		},
 	{
-	      name:	"das-1201",	// 4924.pdf (keithley user's manual)
-	      ai:	das16_ai_rinsn,
-	      ai_nbits:12,
-	      ai_speed:20000,
-	      ai_pg:	das16_pg_none,
-	      ao:	NULL,
-	      di:	das16_di_rbits,
-	      do_:	das16_do_wbits,
-	      i8255_offset:0x400,
-	      i8254_offset:0x0c,
-	      size:	0x408,
-	      id:	0x20,
+	.name = "das-1201",	/*  4924.pdf (keithley user's manual) */
+	.ai = das16_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_speed = 20000,
+	.ai_pg = das16_pg_none,
+	.ao = NULL,
+	.di = das16_di_rbits,
+	.do_ = das16_do_wbits,
+	.i8255_offset = 0x400,
+	.i8254_offset = 0x0c,
+	.size = 0x408,
+	.id = 0x20,
 		},
 	{
-	      name:	"das-1202",	// 4924.pdf (keithley user's manual)
-	      ai:	das16_ai_rinsn,
-	      ai_nbits:12,
-	      ai_speed:10000,
-	      ai_pg:	das16_pg_none,
-	      ao:	NULL,
-	      di:	das16_di_rbits,
-	      do_:	das16_do_wbits,
-	      i8255_offset:0x400,
-	      i8254_offset:0x0c,
-	      size:	0x408,
-	      id:	0x20,
+	.name = "das-1202",	/*  4924.pdf (keithley user's manual) */
+	.ai = das16_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_speed = 10000,
+	.ai_pg = das16_pg_none,
+	.ao = NULL,
+	.di = das16_di_rbits,
+	.do_ = das16_do_wbits,
+	.i8255_offset = 0x400,
+	.i8254_offset = 0x0c,
+	.size = 0x408,
+	.id = 0x20,
 		},
 	{
-	      name:	"das-1401",	// 4919.pdf and 4922.pdf (keithley user's manual)
-	      ai:	das16_ai_rinsn,
-	      ai_nbits:12,
-	      ai_speed:10000,
-	      ai_pg:	das16_pg_1601,
-	      ao:	NULL,
-	      di:	das16_di_rbits,
-	      do_:	das16_do_wbits,
-	      i8255_offset:0x0,
-	      i8254_offset:0x0c,
-	      size:	0x408,
-	      id:	0xc0	// 4919.pdf says id bits are 0xe0, 4922.pdf says 0xc0
+	.name = "das-1401",	/*  4919.pdf and 4922.pdf (keithley user's manual) */
+	.ai = das16_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_speed = 10000,
+	.ai_pg = das16_pg_1601,
+	.ao = NULL,
+	.di = das16_di_rbits,
+	.do_ = das16_do_wbits,
+	.i8255_offset = 0x0,
+	.i8254_offset = 0x0c,
+	.size = 0x408,
+	.id = 0xc0	/*  4919.pdf says id bits are 0xe0, 4922.pdf says 0xc0 */
 		},
 	{
-	      name:	"das-1402",	// 4919.pdf and 4922.pdf (keithley user's manual)
-	      ai:	das16_ai_rinsn,
-	      ai_nbits:12,
-	      ai_speed:10000,
-	      ai_pg:	das16_pg_1602,
-	      ao:	NULL,
-	      di:	das16_di_rbits,
-	      do_:	das16_do_wbits,
-	      i8255_offset:0x0,
-	      i8254_offset:0x0c,
-	      size:	0x408,
-	      id:	0xc0	// 4919.pdf says id bits are 0xe0, 4922.pdf says 0xc0
+	.name = "das-1402",	/*  4919.pdf and 4922.pdf (keithley user's manual) */
+	.ai = das16_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_speed = 10000,
+	.ai_pg = das16_pg_1602,
+	.ao = NULL,
+	.di = das16_di_rbits,
+	.do_ = das16_do_wbits,
+	.i8255_offset = 0x0,
+	.i8254_offset = 0x0c,
+	.size = 0x408,
+	.id = 0xc0	/*  4919.pdf says id bits are 0xe0, 4922.pdf says 0xc0 */
 		},
 	{
-	      name:	"das-1601",	// 4919.pdf
-	      ai:	das16_ai_rinsn,
-	      ai_nbits:12,
-	      ai_speed:10000,
-	      ai_pg:	das16_pg_1601,
-	      ao:	das16_ao_winsn,
-	      ao_nbits:12,
-	      di:	das16_di_rbits,
-	      do_:	das16_do_wbits,
-	      i8255_offset:0x400,
-	      i8254_offset:0x0c,
-	      size:	0x408,
-      id:	0xc0},
+	.name = "das-1601",	/*  4919.pdf */
+	.ai = das16_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_speed = 10000,
+	.ai_pg = das16_pg_1601,
+	.ao = das16_ao_winsn,
+	.ao_nbits = 12,
+	.di = das16_di_rbits,
+	.do_ = das16_do_wbits,
+	.i8255_offset = 0x400,
+	.i8254_offset = 0x0c,
+	.size = 0x408,
+	.id = 0xc0},
 	{
-	      name:	"das-1602",	// 4919.pdf
-	      ai:	das16_ai_rinsn,
-	      ai_nbits:12,
-	      ai_speed:10000,
-	      ai_pg:	das16_pg_1602,
-	      ao:	das16_ao_winsn,
-	      ao_nbits:12,
-	      di:	das16_di_rbits,
-	      do_:	das16_do_wbits,
-	      i8255_offset:0x400,
-	      i8254_offset:0x0c,
-	      size:	0x408,
-      id:	0xc0},
+	.name = "das-1602",	/*  4919.pdf */
+	.ai = das16_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_speed = 10000,
+	.ai_pg = das16_pg_1602,
+	.ao = das16_ao_winsn,
+	.ao_nbits = 12,
+	.di = das16_di_rbits,
+	.do_ = das16_do_wbits,
+	.i8255_offset = 0x400,
+	.i8254_offset = 0x0c,
+	.size = 0x408,
+	.id = 0xc0},
 	{
-	      name:	"cio-das1401/12",	// cio-das1400_series.pdf
-	      ai:	das16_ai_rinsn,
-	      ai_nbits:12,
-	      ai_speed:6250,
-	      ai_pg:	das16_pg_1601,
-	      ao:	NULL,
-	      di:	das16_di_rbits,
-	      do_:	das16_do_wbits,
-	      i8255_offset:0,
-	      i8254_offset:0x0c,
-	      size:	0x408,
-      id:	0xc0},
+	.name = "cio-das1401/12",	/*  cio-das1400_series.pdf */
+	.ai = das16_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_speed = 6250,
+	.ai_pg = das16_pg_1601,
+	.ao = NULL,
+	.di = das16_di_rbits,
+	.do_ = das16_do_wbits,
+	.i8255_offset = 0,
+	.i8254_offset = 0x0c,
+	.size = 0x408,
+	.id = 0xc0},
 	{
-	      name:	"cio-das1402/12",	// cio-das1400_series.pdf
-	      ai:	das16_ai_rinsn,
-	      ai_nbits:12,
-	      ai_speed:6250,
-	      ai_pg:	das16_pg_1602,
-	      ao:	NULL,
-	      di:	das16_di_rbits,
-	      do_:	das16_do_wbits,
-	      i8255_offset:0,
-	      i8254_offset:0x0c,
-	      size:	0x408,
-      id:	0xc0},
+	.name = "cio-das1402/12",	/*  cio-das1400_series.pdf */
+	.ai = das16_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_speed = 6250,
+	.ai_pg = das16_pg_1602,
+	.ao = NULL,
+	.di = das16_di_rbits,
+	.do_ = das16_do_wbits,
+	.i8255_offset = 0,
+	.i8254_offset = 0x0c,
+	.size = 0x408,
+	.id = 0xc0},
 	{
-	      name:	"cio-das1402/16",	// cio-das1400_series.pdf
-	      ai:	das16_ai_rinsn,
-	      ai_nbits:16,
-	      ai_speed:10000,
-	      ai_pg:	das16_pg_1602,
-	      ao:	NULL,
-	      di:	das16_di_rbits,
-	      do_:	das16_do_wbits,
-	      i8255_offset:0,
-	      i8254_offset:0x0c,
-	      size:	0x408,
-      id:	0xc0},
+	.name = "cio-das1402/16",	/*  cio-das1400_series.pdf */
+	.ai = das16_ai_rinsn,
+	.ai_nbits = 16,
+	.ai_speed = 10000,
+	.ai_pg = das16_pg_1602,
+	.ao = NULL,
+	.di = das16_di_rbits,
+	.do_ = das16_do_wbits,
+	.i8255_offset = 0,
+	.i8254_offset = 0x0c,
+	.size = 0x408,
+	.id = 0xc0},
 	{
-	      name:	"cio-das1601/12",	// cio-das160x-1x.pdf
-	      ai:	das16_ai_rinsn,
-	      ai_nbits:12,
-	      ai_speed:6250,
-	      ai_pg:	das16_pg_1601,
-	      ao:	das16_ao_winsn,
-	      ao_nbits:12,
-	      di:	das16_di_rbits,
-	      do_:	das16_do_wbits,
-	      i8255_offset:0x400,
-	      i8254_offset:0x0c,
-	      size:	0x408,
-      id:	0xc0},
+	.name = "cio-das1601/12",	/*  cio-das160x-1x.pdf */
+	.ai = das16_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_speed = 6250,
+	.ai_pg = das16_pg_1601,
+	.ao = das16_ao_winsn,
+	.ao_nbits = 12,
+	.di = das16_di_rbits,
+	.do_ = das16_do_wbits,
+	.i8255_offset = 0x400,
+	.i8254_offset = 0x0c,
+	.size = 0x408,
+	.id = 0xc0},
 	{
-	      name:	"cio-das1602/12",	// cio-das160x-1x.pdf
-	      ai:	das16_ai_rinsn,
-	      ai_nbits:12,
-	      ai_speed:10000,
-	      ai_pg:	das16_pg_1602,
-	      ao:	das16_ao_winsn,
-	      ao_nbits:12,
-	      di:	das16_di_rbits,
-	      do_:	das16_do_wbits,
-	      i8255_offset:0x400,
-	      i8254_offset:0x0c,
-	      size:	0x408,
-      id:	0xc0},
+	.name = "cio-das1602/12",	/*  cio-das160x-1x.pdf */
+	.ai = das16_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_speed = 10000,
+	.ai_pg = das16_pg_1602,
+	.ao = das16_ao_winsn,
+	.ao_nbits = 12,
+	.di = das16_di_rbits,
+	.do_ = das16_do_wbits,
+	.i8255_offset = 0x400,
+	.i8254_offset = 0x0c,
+	.size = 0x408,
+	.id = 0xc0},
 	{
-	      name:	"cio-das1602/16",	// cio-das160x-1x.pdf
-	      ai:	das16_ai_rinsn,
-	      ai_nbits:16,
-	      ai_speed:10000,
-	      ai_pg:	das16_pg_1602,
-	      ao:	das16_ao_winsn,
-	      ao_nbits:12,
-	      di:	das16_di_rbits,
-	      do_:	das16_do_wbits,
-	      i8255_offset:0x400,
-	      i8254_offset:0x0c,
-	      size:	0x408,
-      id:	0xc0},
+	.name = "cio-das1602/16",	/*  cio-das160x-1x.pdf */
+	.ai = das16_ai_rinsn,
+	.ai_nbits = 16,
+	.ai_speed = 10000,
+	.ai_pg = das16_pg_1602,
+	.ao = das16_ao_winsn,
+	.ao_nbits = 12,
+	.di = das16_di_rbits,
+	.do_ = das16_do_wbits,
+	.i8255_offset = 0x400,
+	.i8254_offset = 0x0c,
+	.size = 0x408,
+	.id = 0xc0},
 	{
-	      name:	"cio-das16/330",	// ?
-	      ai:	das16_ai_rinsn,
-	      ai_nbits:12,
-	      ai_speed:3030,
-	      ai_pg:	das16_pg_16jr,
-	      ao:	NULL,
-	      di:	das16_di_rbits,
-	      do_:	das16_do_wbits,
-	      i8255_offset:0,
-	      i8254_offset:0x0c,
-	      size:	0x14,
-      id:	0xf0},
+	.name = "cio-das16/330",	/*  ? */
+	.ai = das16_ai_rinsn,
+	.ai_nbits = 12,
+	.ai_speed = 3030,
+	.ai_pg = das16_pg_16jr,
+	.ao = NULL,
+	.di = das16_di_rbits,
+	.do_ = das16_do_wbits,
+	.i8255_offset = 0,
+	.i8254_offset = 0x0c,
+	.size = 0x14,
+	.id = 0xf0},
 #if 0
 	{
-	      name:	"das16/330i",	// ?
+	.name = "das16/330i",	/*  ? */
 		},
 	{
-	      name:	"das16/jr/ctr5",	// ?
+	.name = "das16/jr/ctr5",	/*  ? */
 		},
 	{
-	      name:	"cio-das16/m1/16",	// cio-das16_m1_16.pdf, this board is a bit quirky, no dma
+	.name = "cio-das16/m1/16",	/*  cio-das16_m1_16.pdf, this board is a bit quirky, no dma */
 		},
 #endif
 };
 
-#define n_das16_boards ((sizeof(das16_boards))/(sizeof(struct das16_board)))
-
-static int das16_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int das16_detach(struct comedi_device * dev);
+static int das16_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int das16_detach(struct comedi_device *dev);
 static struct comedi_driver driver_das16 = {
-      driver_name:"das16",
-      module:THIS_MODULE,
-      attach:das16_attach,
-      detach:das16_detach,
-      board_name:&das16_boards[0].name,
-      num_names:n_das16_boards,
-      offset:sizeof(das16_boards[0]),
+	.driver_name = "das16",
+	.module = THIS_MODULE,
+	.attach = das16_attach,
+	.detach = das16_detach,
+	.board_name = &das16_boards[0].name,
+	.num_names = ARRAY_SIZE(das16_boards),
+	.offset = sizeof(das16_boards[0]),
 };
 
 #define DAS16_TIMEOUT 1000
@@ -719,31 +718,31 @@ static inline int timer_period(void)
 	return HZ / 20;
 }
 struct das16_private_struct {
-	unsigned int ai_unipolar;	// unipolar flag
-	unsigned int ai_singleended;	// single ended flag
-	unsigned int clockbase;	// master clock speed in ns
-	volatile unsigned int control_state;	// dma, interrupt and trigger control bits
-	volatile unsigned long adc_byte_count;	// number of bytes remaining
-	unsigned int divisor1;	// divisor dividing master clock to get conversion frequency
-	unsigned int divisor2;	// divisor dividing master clock to get conversion frequency
-	unsigned int dma_chan;	// dma channel
+	unsigned int ai_unipolar;	/*  unipolar flag */
+	unsigned int ai_singleended;	/*  single ended flag */
+	unsigned int clockbase;	/*  master clock speed in ns */
+	volatile unsigned int control_state;	/*  dma, interrupt and trigger control bits */
+	volatile unsigned long adc_byte_count;	/*  number of bytes remaining */
+	unsigned int divisor1;	/*  divisor dividing master clock to get conversion frequency */
+	unsigned int divisor2;	/*  divisor dividing master clock to get conversion frequency */
+	unsigned int dma_chan;	/*  dma channel */
 	uint16_t *dma_buffer[2];
 	dma_addr_t dma_buffer_addr[2];
 	unsigned int current_buffer;
-	volatile unsigned int dma_transfer_size;	// target number of bytes to transfer per dma shot
-	// user-defined analog input and output ranges defined from config options
+	volatile unsigned int dma_transfer_size;	/*  target number of bytes to transfer per dma shot */
+	/*  user-defined analog input and output ranges defined from config options */
 	struct comedi_lrange *user_ai_range_table;
 	struct comedi_lrange *user_ao_range_table;
 
-	struct timer_list timer;	// for timed interrupt
+	struct timer_list timer;	/*  for timed interrupt */
 	volatile short timer_running;
-	volatile short timer_mode;	// true if using timer mode
+	volatile short timer_mode;	/*  true if using timer mode */
 };
 #define devpriv ((struct das16_private_struct *)(dev->private))
 #define thisboard ((struct das16_board *)(dev->board_ptr))
 
-static int das16_cmd_test(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int das16_cmd_test(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0, tmp;
 	int gain, start_chan, i;
@@ -757,7 +756,7 @@ static int das16_cmd_test(struct comedi_device * dev, struct comedi_subdevice *
 
 	tmp = cmd->scan_begin_src;
 	mask = TRIG_FOLLOW;
-	// if board supports burst mode
+	/*  if board supports burst mode */
 	if (thisboard->size > 0x400)
 		mask |= TRIG_TIMER | TRIG_EXT;
 	cmd->scan_begin_src &= mask;
@@ -766,7 +765,7 @@ static int das16_cmd_test(struct comedi_device * dev, struct comedi_subdevice *
 
 	tmp = cmd->convert_src;
 	mask = TRIG_TIMER | TRIG_EXT;
-	// if board supports burst mode
+	/*  if board supports burst mode */
 	if (thisboard->size > 0x400)
 		mask |= TRIG_NOW;
 	cmd->convert_src &= mask;
@@ -797,7 +796,7 @@ static int das16_cmd_test(struct comedi_device * dev, struct comedi_subdevice *
 	if (cmd->stop_src != TRIG_NONE && cmd->stop_src != TRIG_COUNT)
 		err++;
 
-	// make sure scan_begin_src and convert_src dont conflict
+	/*  make sure scan_begin_src and convert_src dont conflict */
 	if (cmd->scan_begin_src == TRIG_FOLLOW && cmd->convert_src == TRIG_NOW)
 		err++;
 	if (cmd->scan_begin_src != TRIG_FOLLOW && cmd->convert_src != TRIG_NOW)
@@ -824,7 +823,7 @@ static int das16_cmd_test(struct comedi_device * dev, struct comedi_subdevice *
 		cmd->scan_end_arg = cmd->chanlist_len;
 		err++;
 	}
-	// check against maximum frequency
+	/*  check against maximum frequency */
 	if (cmd->scan_begin_src == TRIG_TIMER) {
 		if (cmd->scan_begin_arg <
 			thisboard->ai_speed * cmd->chanlist_len) {
@@ -849,10 +848,10 @@ static int das16_cmd_test(struct comedi_device * dev, struct comedi_subdevice *
 	if (err)
 		return 3;
 
-	// step 4: fix up arguments
+	/*  step 4: fix up arguments */
 	if (cmd->scan_begin_src == TRIG_TIMER) {
 		unsigned int tmp = cmd->scan_begin_arg;
-		// set divisors, correct timing arguments
+		/*  set divisors, correct timing arguments */
 		i8253_cascade_ns_to_timer_2div(devpriv->clockbase,
 			&(devpriv->divisor1), &(devpriv->divisor2),
 			&(cmd->scan_begin_arg), cmd->flags & TRIG_ROUND_MASK);
@@ -860,7 +859,7 @@ static int das16_cmd_test(struct comedi_device * dev, struct comedi_subdevice *
 	}
 	if (cmd->convert_src == TRIG_TIMER) {
 		unsigned int tmp = cmd->convert_arg;
-		// set divisors, correct timing arguments
+		/*  set divisors, correct timing arguments */
 		i8253_cascade_ns_to_timer_2div(devpriv->clockbase,
 			&(devpriv->divisor1), &(devpriv->divisor2),
 			&(cmd->convert_arg), cmd->flags & TRIG_ROUND_MASK);
@@ -869,7 +868,7 @@ static int das16_cmd_test(struct comedi_device * dev, struct comedi_subdevice *
 	if (err)
 		return 4;
 
-	// check channel/gain list against card's limitations
+	/*  check channel/gain list against card's limitations */
 	if (cmd->chanlist) {
 		gain = CR_RANGE(cmd->chanlist[0]);
 		start_chan = CR_CHAN(cmd->chanlist[0]);
@@ -893,7 +892,7 @@ static int das16_cmd_test(struct comedi_device * dev, struct comedi_subdevice *
 	return 0;
 }
 
-static int das16_cmd_exec(struct comedi_device * dev, struct comedi_subdevice * s)
+static int das16_cmd_exec(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct comedi_async *async = s->async;
 	struct comedi_cmd *cmd = &async->cmd;
@@ -916,11 +915,11 @@ static int das16_cmd_exec(struct comedi_device * dev, struct comedi_subdevice *
 	devpriv->adc_byte_count =
 		cmd->stop_arg * cmd->chanlist_len * sizeof(uint16_t);
 
-	// disable conversions for das1600 mode
+	/*  disable conversions for das1600 mode */
 	if (thisboard->size > 0x400) {
 		outb(DAS1600_CONV_DISABLE, dev->iobase + DAS1600_CONV);
 	}
-	// set scan limits
+	/*  set scan limits */
 	byte = CR_CHAN(cmd->chanlist[0]);
 	byte |= CR_CHAN(cmd->chanlist[cmd->chanlist_len - 1]) << 4;
 	outb(byte, dev->iobase + DAS16_MUX);
@@ -945,7 +944,7 @@ static int das16_cmd_exec(struct comedi_device * dev, struct comedi_subdevice *
 	if (thisboard->size > 0x400) {
 		if (cmd->convert_src == TRIG_NOW) {
 			outb(DAS1600_BURST_VAL, dev->iobase + DAS1600_BURST);
-			// set burst length
+			/*  set burst length */
 			byte |= BURST_LEN_BITS(cmd->chanlist_len - 1);
 		} else {
 			outb(0, dev->iobase + DAS1600_BURST);
@@ -953,7 +952,7 @@ static int das16_cmd_exec(struct comedi_device * dev, struct comedi_subdevice *
 	}
 	outb(byte, dev->iobase + DAS16_PACER);
 
-	// set up dma transfer
+	/*  set up dma transfer */
 	flags = claim_dma_lock();
 	disable_dma(devpriv->dma_chan);
 	/* clear flip-flop to make sure 2-byte registers for
@@ -962,13 +961,13 @@ static int das16_cmd_exec(struct comedi_device * dev, struct comedi_subdevice *
 	devpriv->current_buffer = 0;
 	set_dma_addr(devpriv->dma_chan,
 		devpriv->dma_buffer_addr[devpriv->current_buffer]);
-	// set appropriate size of transfer
+	/*  set appropriate size of transfer */
 	devpriv->dma_transfer_size = das16_suggest_transfer_size(dev, *cmd);
 	set_dma_count(devpriv->dma_chan, devpriv->dma_transfer_size);
 	enable_dma(devpriv->dma_chan);
 	release_dma_lock(flags);
 
-	// set up interrupt
+	/*  set up interrupt */
 	if (devpriv->timer_mode) {
 		devpriv->timer_running = 1;
 		devpriv->timer.expires = jiffies + timer_period();
@@ -996,18 +995,18 @@ static int das16_cmd_exec(struct comedi_device * dev, struct comedi_subdevice *
 	return 0;
 }
 
-static int das16_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int das16_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	spin_lock_irqsave(&dev->spinlock, flags);
 	/* disable interrupts, dma and pacer clocked conversions */
 	devpriv->control_state &= ~DAS16_INTE & ~PACING_MASK & ~DMA_ENABLE;
 	outb(devpriv->control_state, dev->iobase + DAS16_CONTROL);
 	if (devpriv->dma_chan)
 		disable_dma(devpriv->dma_chan);
 
-	// disable SW timer
+	/*  disable SW timer */
 	if (devpriv->timer_mode && devpriv->timer_running) {
 		devpriv->timer_running = 0;
 		del_timer(&devpriv->timer);
@@ -1018,12 +1017,12 @@ static int das16_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
 		outb(0, dev->iobase + DAS1600_BURST);
 	}
 
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
 	return 0;
 }
 
-static void das16_reset(struct comedi_device * dev)
+static void das16_reset(struct comedi_device *dev)
 {
 	outb(0, dev->iobase + DAS16_STATUS);
 	outb(0, dev->iobase + DAS16_CONTROL);
@@ -1031,15 +1030,15 @@ static void das16_reset(struct comedi_device * dev)
 	outb(0, dev->iobase + DAS16_CNTR_CONTROL);
 }
 
-static int das16_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das16_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i, n;
 	int range;
 	int chan;
 	int msb, lsb;
 
-	// disable interrupts and pacing
+	/*  disable interrupts and pacing */
 	devpriv->control_state &= ~DAS16_INTE & ~DMA_ENABLE & ~PACING_MASK;
 	outb(devpriv->control_state, dev->iobase + DAS16_CONTROL);
 
@@ -1064,7 +1063,7 @@ static int das16_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice *
 				break;
 		}
 		if (i == DAS16_TIMEOUT) {
-			rt_printk("das16: timeout\n");
+			printk("das16: timeout\n");
 			return -ETIME;
 		}
 		msb = inb(dev->iobase + DAS16_AI_MSB);
@@ -1079,8 +1078,8 @@ static int das16_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice *
 	return n;
 }
 
-static int das16_di_rbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das16_di_rbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int bits;
 
@@ -1091,17 +1090,17 @@ static int das16_di_rbits(struct comedi_device * dev, struct comedi_subdevice *
 	return 2;
 }
 
-static int das16_do_wbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das16_do_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int wbits;
 
-	// only set bits that have been masked
+	/*  only set bits that have been masked */
 	data[0] &= 0xf;
 	wbits = s->state;
-	// zero bits that have been masked
+	/*  zero bits that have been masked */
 	wbits &= ~data[0];
-	// set masked bits
+	/*  set masked bits */
 	wbits |= data[0] & data[1];
 	s->state = wbits;
 	data[1] = wbits;
@@ -1111,8 +1110,8 @@ static int das16_do_wbits(struct comedi_device * dev, struct comedi_subdevice *
 	return 2;
 }
 
-static int das16_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das16_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int lsb, msb;
@@ -1135,7 +1134,7 @@ static int das16_ao_winsn(struct comedi_device * dev, struct comedi_subdevice *
 	return i;
 }
 
-static irqreturn_t das16_dma_interrupt(int irq, void *d PT_REGS_ARG)
+static irqreturn_t das16_dma_interrupt(int irq, void *d)
 {
 	int status;
 	struct comedi_device *dev = d;
@@ -1169,7 +1168,7 @@ static void das16_timer_interrupt(unsigned long arg)
 	an even transfer count after disabling dma
 	channel.
 */
-static int disable_dma_on_even(struct comedi_device * dev)
+static int disable_dma_on_even(struct comedi_device *dev)
 {
 	int residue;
 	int i;
@@ -1182,7 +1181,7 @@ static int disable_dma_on_even(struct comedi_device * dev)
 		enable_dma(devpriv->dma_chan);
 		for (j = 0; j < enable_timeout; ++j) {
 			int new_residue;
-			comedi_udelay(2);
+			udelay(2);
 			new_residue = get_dma_residue(devpriv->dma_chan);
 			if (new_residue != residue)
 				break;
@@ -1197,7 +1196,7 @@ static int disable_dma_on_even(struct comedi_device * dev)
 	return residue;
 }
 
-static void das16_interrupt(struct comedi_device * dev)
+static void das16_interrupt(struct comedi_device *dev)
 {
 	unsigned long dma_flags, spin_flags;
 	struct comedi_subdevice *s = dev->read_subdev;
@@ -1210,7 +1209,7 @@ static void das16_interrupt(struct comedi_device * dev)
 		comedi_error(dev, "premature interrupt");
 		return;
 	}
-	// initialize async here to make sure it is not NULL
+	/*  initialize async here to make sure it is not NULL */
 	async = s->async;
 	cmd = &async->cmd;
 
@@ -1219,9 +1218,9 @@ static void das16_interrupt(struct comedi_device * dev)
 		return;
 	}
 
-	comedi_spin_lock_irqsave(&dev->spinlock, spin_flags);
+	spin_lock_irqsave(&dev->spinlock, spin_flags);
 	if ((devpriv->control_state & DMA_ENABLE) == 0) {
-		comedi_spin_unlock_irqrestore(&dev->spinlock, spin_flags);
+		spin_unlock_irqrestore(&dev->spinlock, spin_flags);
 		DEBUG_PRINT("interrupt while dma disabled?\n");
 		return;
 	}
@@ -1230,7 +1229,7 @@ static void das16_interrupt(struct comedi_device * dev)
 	clear_dma_ff(devpriv->dma_chan);
 	residue = disable_dma_on_even(dev);
 
-	// figure out how many points to read
+	/*  figure out how many points to read */
 	if (residue > devpriv->dma_transfer_size) {
 		comedi_error(dev, "residue > transfer size!\n");
 		async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA;
@@ -1247,12 +1246,12 @@ static void das16_interrupt(struct comedi_device * dev)
 	devpriv->current_buffer = (devpriv->current_buffer + 1) % 2;
 	devpriv->adc_byte_count -= num_bytes;
 
-	// figure out how many bytes for next transfer
+	/*  figure out how many bytes for next transfer */
 	if (cmd->stop_src == TRIG_COUNT && devpriv->timer_mode == 0 &&
 		devpriv->dma_transfer_size > devpriv->adc_byte_count)
 		devpriv->dma_transfer_size = devpriv->adc_byte_count;
 
-	// re-enable  dma
+	/*  re-enable  dma */
 	if ((async->events & COMEDI_CB_EOA) == 0) {
 		set_dma_addr(devpriv->dma_chan,
 			devpriv->dma_buffer_addr[devpriv->current_buffer]);
@@ -1265,7 +1264,7 @@ static void das16_interrupt(struct comedi_device * dev)
 	}
 	release_dma_lock(dma_flags);
 
-	comedi_spin_unlock_irqrestore(&dev->spinlock, spin_flags);
+	spin_unlock_irqrestore(&dev->spinlock, spin_flags);
 
 	cfc_write_array_to_buffer(s,
 		devpriv->dma_buffer[buffer_index], num_bytes);
@@ -1273,7 +1272,7 @@ static void das16_interrupt(struct comedi_device * dev)
 	cfc_handle_events(dev, s);
 }
 
-static unsigned int das16_set_pacer(struct comedi_device * dev, unsigned int ns,
+static unsigned int das16_set_pacer(struct comedi_device *dev, unsigned int ns,
 	int rounding_flags)
 {
 	i8253_cascade_ns_to_timer_2div(devpriv->clockbase, &(devpriv->divisor1),
@@ -1286,7 +1285,7 @@ static unsigned int das16_set_pacer(struct comedi_device * dev, unsigned int ns,
 	return ns;
 }
 
-static void reg_dump(struct comedi_device * dev)
+static void reg_dump(struct comedi_device *dev)
 {
 	DEBUG_PRINT("********DAS1600 REGISTER DUMP********\n");
 	DEBUG_PRINT("DAS16_MUX: %x\n", inb(dev->iobase + DAS16_MUX));
@@ -1304,7 +1303,7 @@ static void reg_dump(struct comedi_device * dev)
 		inb(dev->iobase + DAS1600_STATUS_B));
 }
 
-static int das16_probe(struct comedi_device * dev, struct comedi_devconfig * it)
+static int das16_probe(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int status;
 	int diobits;
@@ -1338,7 +1337,7 @@ static int das16_probe(struct comedi_device * dev, struct comedi_devconfig * it)
 	return 0;
 }
 
-static int das1600_mode_detect(struct comedi_device * dev)
+static int das1600_mode_detect(struct comedi_device *dev)
 {
 	int status = 0;
 
@@ -1366,7 +1365,7 @@ static int das1600_mode_detect(struct comedi_device * dev)
  *   3  Clock speed (in MHz)
  */
 
-static int das16_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int das16_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	int ret;
@@ -1391,7 +1390,7 @@ static int das16_attach(struct comedi_device * dev, struct comedi_devconfig * it
 
 	printk("comedi%d: das16:", dev->minor);
 
-	// check that clock setting is valid
+	/*  check that clock setting is valid */
 	if (it->options[3]) {
 		if (it->options[3] != 0 &&
 			it->options[3] != 1 && it->options[3] != 10) {
@@ -1400,7 +1399,8 @@ static int das16_attach(struct comedi_device * dev, struct comedi_devconfig * it
 		}
 	}
 
-	if ((ret = alloc_private(dev, sizeof(struct das16_private_struct))) < 0)
+	ret = alloc_private(dev, sizeof(struct das16_private_struct));
+	if (ret < 0)
 		return ret;
 
 	if (thisboard->size < 0x400) {
@@ -1431,27 +1431,28 @@ static int das16_attach(struct comedi_device * dev, struct comedi_devconfig * it
 
 	dev->iobase = iobase;
 
-	// probe id bits to make sure they are consistent
+	/*  probe id bits to make sure they are consistent */
 	if (das16_probe(dev, it)) {
 		printk(" id bits do not match selected board, aborting\n");
 		return -EINVAL;
 	}
 	dev->board_name = thisboard->name;
 
-	// get master clock speed
+	/*  get master clock speed */
 	if (thisboard->size < 0x400) {
 		if (it->options[3])
 			devpriv->clockbase = 1000 / it->options[3];
 		else
-			devpriv->clockbase = 1000;	// 1 MHz default
+			devpriv->clockbase = 1000;	/*  1 MHz default */
 	} else {
 		das1600_mode_detect(dev);
 	}
 
 	/* now for the irq */
 	if (irq > 1 && irq < 8) {
-		if ((ret = comedi_request_irq(irq, das16_dma_interrupt, 0,
-					"das16", dev)) < 0)
+		ret = request_irq(irq, das16_dma_interrupt, 0, "das16", dev);
+
+		if (ret < 0)
 			return ret;
 		dev->irq = irq;
 		printk(" ( irq = %u )", irq);
@@ -1462,10 +1463,10 @@ static int das16_attach(struct comedi_device * dev, struct comedi_devconfig * it
 		return -EINVAL;
 	}
 
-	// initialize dma
+	/*  initialize dma */
 	dma_chan = it->options[2];
 	if (dma_chan == 1 || dma_chan == 3) {
-		// allocate dma buffers
+		/*  allocate dma buffers */
 		int i;
 		for (i = 0; i < 2; i++) {
 			devpriv->dma_buffer[i] = pci_alloc_consistent(NULL,
@@ -1491,27 +1492,27 @@ static int das16_attach(struct comedi_device * dev, struct comedi_devconfig * it
 		return -EINVAL;
 	}
 
-	// get any user-defined input range
+	/*  get any user-defined input range */
 	if (thisboard->ai_pg == das16_pg_none &&
 		(it->options[4] || it->options[5])) {
-		// allocate single-range range table
+		/*  allocate single-range range table */
 		devpriv->user_ai_range_table =
 			kmalloc(sizeof(struct comedi_lrange) + sizeof(struct comedi_krange),
 			GFP_KERNEL);
-		// initialize ai range
+		/*  initialize ai range */
 		devpriv->user_ai_range_table->length = 1;
 		user_ai_range = devpriv->user_ai_range_table->range;
 		user_ai_range->min = it->options[4];
 		user_ai_range->max = it->options[5];
 		user_ai_range->flags = UNIT_volt;
 	}
-	// get any user-defined output range
+	/*  get any user-defined output range */
 	if (it->options[6] || it->options[7]) {
-		// allocate single-range range table
+		/*  allocate single-range range table */
 		devpriv->user_ao_range_table =
 			kmalloc(sizeof(struct comedi_lrange) + sizeof(struct comedi_krange),
 			GFP_KERNEL);
-		// initialize ao range
+		/*  initialize ao range */
 		devpriv->user_ao_range_table->length = 1;
 		user_ao_range = devpriv->user_ao_range_table->range;
 		user_ao_range->min = it->options[6];
@@ -1526,7 +1527,8 @@ static int das16_attach(struct comedi_device * dev, struct comedi_devconfig * it
 	}
 	devpriv->timer_mode = timer_mode ? 1 : 0;
 
-	if ((ret = alloc_subdevices(dev, 5)) < 0)
+	ret = alloc_subdevices(dev, 5);
+	if (ret < 0)
 		return ret;
 
 	s = dev->subdevices + 0;
@@ -1545,7 +1547,7 @@ static int das16_attach(struct comedi_device * dev, struct comedi_devconfig * it
 			s->subdev_flags |= SDF_DIFF;
 		}
 		s->maxdata = (1 << thisboard->ai_nbits) - 1;
-		if (devpriv->user_ai_range_table) {	// user defined ai range
+		if (devpriv->user_ai_range_table) {	/*  user defined ai range */
 			s->range_table = devpriv->user_ai_range_table;
 		} else if (devpriv->ai_unipolar) {
 			s->range_table = das16_ai_uni_lranges[thisboard->ai_pg];
@@ -1568,7 +1570,7 @@ static int das16_attach(struct comedi_device * dev, struct comedi_devconfig * it
 		s->subdev_flags = SDF_WRITABLE;
 		s->n_chan = 2;
 		s->maxdata = (1 << thisboard->ao_nbits) - 1;
-		if (devpriv->user_ao_range_table) {	// user defined ao range
+		if (devpriv->user_ao_range_table) {	/*  user defined ao range */
 			s->range_table = devpriv->user_ao_range_table;
 		} else {
 			s->range_table = &range_unknown;
@@ -1600,7 +1602,7 @@ static int das16_attach(struct comedi_device * dev, struct comedi_devconfig * it
 		s->maxdata = 1;
 		s->range_table = &range_digital;
 		s->insn_bits = thisboard->do_;
-		// initialize digital output lines
+		/*  initialize digital output lines */
 		outb(s->state, dev->iobase + DAS16_DIO);
 	} else {
 		s->type = COMEDI_SUBD_UNUSED;
@@ -1620,7 +1622,7 @@ static int das16_attach(struct comedi_device * dev, struct comedi_devconfig * it
 	devpriv->control_state = DAS16_IRQ(dev->irq);
 	outb(devpriv->control_state, dev->iobase + DAS16_CONTROL);
 
-	// turn on das1600 mode if available
+	/*  turn on das1600 mode if available */
 	if (thisboard->size > 0x400) {
 		outb(DAS1600_ENABLE_VAL, dev->iobase + DAS1600_ENABLE);
 		outb(0, dev->iobase + DAS1600_CONV);
@@ -1630,7 +1632,7 @@ static int das16_attach(struct comedi_device * dev, struct comedi_devconfig * it
 	return 0;
 }
 
-static int das16_detach(struct comedi_device * dev)
+static int das16_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: das16: remove\n", dev->minor);
 
@@ -1656,7 +1658,7 @@ static int das16_detach(struct comedi_device * dev)
 	}
 
 	if (dev->irq)
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 
 	if (dev->iobase) {
 		if (thisboard->size < 0x400) {
@@ -1673,8 +1675,8 @@ static int das16_detach(struct comedi_device * dev)
 
 COMEDI_INITCLEANUP(driver_das16);
 
-// utility function that suggests a dma transfer size in bytes
-static unsigned int das16_suggest_transfer_size(struct comedi_device * dev,
+/* utility function that suggests a dma transfer size in bytes */
+static unsigned int das16_suggest_transfer_size(struct comedi_device *dev,
 	struct comedi_cmd cmd)
 {
 	unsigned int size;
@@ -1692,18 +1694,18 @@ static unsigned int das16_suggest_transfer_size(struct comedi_device * dev,
 		freq = 1000000000 / cmd.convert_arg;
 	else if (cmd.scan_begin_src == TRIG_TIMER)
 		freq = (1000000000 / cmd.scan_begin_arg) * cmd.chanlist_len;
-	// return some default value
+	/*  return some default value */
 	else
 		freq = 0xffffffff;
 
 	if (cmd.flags & TRIG_WAKE_EOS) {
 		size = sample_size * cmd.chanlist_len;
 	} else {
-		// make buffer fill in no more than 1/3 second
+		/*  make buffer fill in no more than 1/3 second */
 		size = (freq / 3) * sample_size;
 	}
 
-	// set a minimum and maximum size allowed
+	/*  set a minimum and maximum size allowed */
 	if (size > DAS16_DMA_SIZE)
 		size = DAS16_DMA_SIZE - DAS16_DMA_SIZE % sample_size;
 	else if (size < sample_size)
@@ -1715,7 +1717,7 @@ static unsigned int das16_suggest_transfer_size(struct comedi_device * dev,
 	return size;
 }
 
-static void das16_ai_munge(struct comedi_device * dev, struct comedi_subdevice * s,
+static void das16_ai_munge(struct comedi_device *dev, struct comedi_subdevice *s,
 	void *array, unsigned int num_bytes, unsigned int start_chan_index)
 {
 	unsigned int i, num_samples = num_bytes / sizeof(short);
diff --git a/drivers/staging/comedi/drivers/das16m1.c b/drivers/staging/comedi/drivers/das16m1.c
index 0e423e199ed..3da8bf47cbf 100644
--- a/drivers/staging/comedi/drivers/das16m1.c
+++ b/drivers/staging/comedi/drivers/das16m1.c
@@ -59,6 +59,7 @@ irq can be omitted, although the cmd interface will not work without it.
 */
 
 #include <linux/ioport.h>
+#include <linux/interrupt.h>
 #include "../comedidev.h"
 
 #include "8255.h"
@@ -68,9 +69,9 @@ irq can be omitted, although the cmd interface will not work without it.
 #define DAS16M1_SIZE 16
 #define DAS16M1_SIZE2 8
 
-#define DAS16M1_XTAL 100	//10 MHz master clock
+#define DAS16M1_XTAL 100	/* 10 MHz master clock */
 
-#define FIFO_SIZE 1024		// 1024 sample fifo
+#define FIFO_SIZE 1024		/*  1024 sample fifo */
 
 /*
     CIO-DAS16_M1.pdf
@@ -92,7 +93,7 @@ irq can be omitted, although the cmd interface will not work without it.
 
 */
 
-#define DAS16M1_AI             0	// 16-bit wide register
+#define DAS16M1_AI             0	/*  16-bit wide register */
 #define   AI_CHAN(x)             ((x) & 0xf)
 #define DAS16M1_CS             2
 #define   EXT_TRIG_BIT           0x1
@@ -131,23 +132,23 @@ static const struct comedi_lrange range_das16m1 = { 9,
 		}
 };
 
-static int das16m1_do_wbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int das16m1_di_rbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int das16m1_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int das16m1_do_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int das16m1_di_rbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int das16m1_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
-static int das16m1_cmd_test(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd);
-static int das16m1_cmd_exec(struct comedi_device * dev, struct comedi_subdevice * s);
-static int das16m1_cancel(struct comedi_device * dev, struct comedi_subdevice * s);
+static int das16m1_cmd_test(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd);
+static int das16m1_cmd_exec(struct comedi_device *dev, struct comedi_subdevice *s);
+static int das16m1_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
 
-static int das16m1_poll(struct comedi_device * dev, struct comedi_subdevice * s);
-static irqreturn_t das16m1_interrupt(int irq, void *d PT_REGS_ARG);
-static void das16m1_handler(struct comedi_device * dev, unsigned int status);
+static int das16m1_poll(struct comedi_device *dev, struct comedi_subdevice *s);
+static irqreturn_t das16m1_interrupt(int irq, void *d);
+static void das16m1_handler(struct comedi_device *dev, unsigned int status);
 
-static unsigned int das16m1_set_pacer(struct comedi_device * dev, unsigned int ns,
+static unsigned int das16m1_set_pacer(struct comedi_device *dev, unsigned int ns,
 	int round_flag);
 
 static int das16m1_irq_bits(unsigned int irq);
@@ -159,36 +160,34 @@ struct das16m1_board {
 
 static const struct das16m1_board das16m1_boards[] = {
 	{
-	      name:	"cio-das16/m1",	// CIO-DAS16_M1.pdf
-	      ai_speed:1000,	// 1MHz max speed
+	.name = "cio-das16/m1",	/*  CIO-DAS16_M1.pdf */
+	.ai_speed = 1000,	/*  1MHz max speed */
 		},
 };
 
-#define das16m1_num_boards ((sizeof(das16m1_boards)) / (sizeof(das16m1_boards[0])))
-
-static int das16m1_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int das16m1_detach(struct comedi_device * dev);
+static int das16m1_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int das16m1_detach(struct comedi_device *dev);
 static struct comedi_driver driver_das16m1 = {
-      driver_name:"das16m1",
-      module:THIS_MODULE,
-      attach:das16m1_attach,
-      detach:das16m1_detach,
-      board_name:&das16m1_boards[0].name,
-      num_names:das16m1_num_boards,
-      offset:sizeof(das16m1_boards[0]),
+	.driver_name = "das16m1",
+	.module = THIS_MODULE,
+	.attach = das16m1_attach,
+	.detach = das16m1_detach,
+	.board_name = &das16m1_boards[0].name,
+	.num_names = ARRAY_SIZE(das16m1_boards),
+	.offset = sizeof(das16m1_boards[0]),
 };
 
 struct das16m1_private_struct {
 	unsigned int control_state;
-	volatile unsigned int adc_count;	// number of samples completed
+	volatile unsigned int adc_count;	/*  number of samples completed */
 	/* initial value in lower half of hardware conversion counter,
 	 * needed to keep track of whether new count has been loaded into
 	 * counter yet (loaded by first sample conversion) */
 	u16 initial_hw_count;
 	short ai_buffer[FIFO_SIZE];
-	unsigned int do_bits;	// saves status of digital output bits
-	unsigned int divisor1;	// divides master clock to obtain conversion speed
-	unsigned int divisor2;	// divides master clock to obtain conversion speed
+	unsigned int do_bits;	/*  saves status of digital output bits */
+	unsigned int divisor1;	/*  divides master clock to obtain conversion speed */
+	unsigned int divisor2;	/*  divides master clock to obtain conversion speed */
 };
 #define devpriv ((struct das16m1_private_struct *)(dev->private))
 #define thisboard ((const struct das16m1_board *)(dev->board_ptr))
@@ -200,8 +199,8 @@ static inline short munge_sample(short data)
 	return (data >> 4) & 0xfff;
 }
 
-static int das16m1_cmd_test(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int das16m1_cmd_test(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	unsigned int err = 0, tmp, i;
 
@@ -299,10 +298,10 @@ static int das16m1_cmd_test(struct comedi_device * dev, struct comedi_subdevice
 	if (err)
 		return 4;
 
-	// check chanlist against board's peculiarities
+	/*  check chanlist against board's peculiarities */
 	if (cmd->chanlist && cmd->chanlist_len > 1) {
 		for (i = 0; i < cmd->chanlist_len; i++) {
-			// even/odd channels must go into even/odd queue addresses
+			/*  even/odd channels must go into even/odd queue addresses */
 			if ((i % 2) != (CR_CHAN(cmd->chanlist[i]) % 2)) {
 				comedi_error(dev, "bad chanlist:\n"
 					" even/odd channels must go have even/odd chanlist indices");
@@ -322,7 +321,7 @@ static int das16m1_cmd_test(struct comedi_device * dev, struct comedi_subdevice
 	return 0;
 }
 
-static int das16m1_cmd_exec(struct comedi_device * dev, struct comedi_subdevice * s)
+static int das16m1_cmd_exec(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct comedi_async *async = s->async;
 	struct comedi_cmd *cmd = &async->cmd;
@@ -337,7 +336,7 @@ static int das16m1_cmd_exec(struct comedi_device * dev, struct comedi_subdevice
 	devpriv->control_state &= ~INTE & ~PACER_MASK;
 	outb(devpriv->control_state, dev->iobase + DAS16M1_INTR_CONTROL);
 
-	// set software count
+	/*  set software count */
 	devpriv->adc_count = 0;
 	/* Initialize lower half of hardware counter, used to determine how
 	 * many samples are in fifo.  Value doesn't actually load into counter
@@ -361,7 +360,7 @@ static int das16m1_cmd_exec(struct comedi_device * dev, struct comedi_subdevice
 		das16m1_set_pacer(dev, cmd->convert_arg,
 		cmd->flags & TRIG_ROUND_MASK);
 
-	// set control & status register
+	/*  set control & status register */
 	byte = 0;
 	/* if we are using external start trigger (also board dislikes having
 	 * both start and conversion triggers external simultaneously) */
@@ -385,7 +384,7 @@ static int das16m1_cmd_exec(struct comedi_device * dev, struct comedi_subdevice
 	return 0;
 }
 
-static int das16m1_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int das16m1_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	devpriv->control_state &= ~INTE & ~PACER_MASK;
 	outb(devpriv->control_state, dev->iobase + DAS16M1_INTR_CONTROL);
@@ -393,8 +392,8 @@ static int das16m1_cancel(struct comedi_device * dev, struct comedi_subdevice *
 	return 0;
 }
 
-static int das16m1_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das16m1_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i, n;
 	int byte;
@@ -430,8 +429,8 @@ static int das16m1_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice
 	return n;
 }
 
-static int das16m1_di_rbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das16m1_di_rbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int bits;
 
@@ -442,17 +441,17 @@ static int das16m1_di_rbits(struct comedi_device * dev, struct comedi_subdevice
 	return 2;
 }
 
-static int das16m1_do_wbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das16m1_do_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int wbits;
 
-	// only set bits that have been masked
+	/*  only set bits that have been masked */
 	data[0] &= 0xf;
 	wbits = devpriv->do_bits;
-	// zero bits that have been masked
+	/*  zero bits that have been masked */
 	wbits &= ~data[0];
-	// set masked bits
+	/*  set masked bits */
 	wbits |= data[0] & data[1];
 	devpriv->do_bits = wbits;
 	data[1] = wbits;
@@ -462,21 +461,21 @@ static int das16m1_do_wbits(struct comedi_device * dev, struct comedi_subdevice
 	return 2;
 }
 
-static int das16m1_poll(struct comedi_device * dev, struct comedi_subdevice * s)
+static int das16m1_poll(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	unsigned long flags;
 	unsigned int status;
 
-	// prevent race with interrupt handler
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	/*  prevent race with interrupt handler */
+	spin_lock_irqsave(&dev->spinlock, flags);
 	status = inb(dev->iobase + DAS16M1_CS);
 	das16m1_handler(dev, status);
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
 	return s->async->buf_write_count - s->async->buf_read_count;
 }
 
-static irqreturn_t das16m1_interrupt(int irq, void *d PT_REGS_ARG)
+static irqreturn_t das16m1_interrupt(int irq, void *d)
 {
 	int status;
 	struct comedi_device *dev = d;
@@ -485,7 +484,7 @@ static irqreturn_t das16m1_interrupt(int irq, void *d PT_REGS_ARG)
 		comedi_error(dev, "premature interrupt");
 		return IRQ_HANDLED;
 	}
-	// prevent race with comedi_poll()
+	/*  prevent race with comedi_poll() */
 	spin_lock(&dev->spinlock);
 
 	status = inb(dev->iobase + DAS16M1_CS);
@@ -505,7 +504,7 @@ static irqreturn_t das16m1_interrupt(int irq, void *d PT_REGS_ARG)
 	return IRQ_HANDLED;
 }
 
-static void munge_sample_array(short * array, unsigned int num_elements)
+static void munge_sample_array(short *array, unsigned int num_elements)
 {
 	unsigned int i;
 
@@ -514,7 +513,7 @@ static void munge_sample_array(short * array, unsigned int num_elements)
 	}
 }
 
-static void das16m1_handler(struct comedi_device * dev, unsigned int status)
+static void das16m1_handler(struct comedi_device *dev, unsigned int status)
 {
 	struct comedi_subdevice *s;
 	struct comedi_async *async;
@@ -527,7 +526,7 @@ static void das16m1_handler(struct comedi_device * dev, unsigned int status)
 	async->events = 0;
 	cmd = &async->cmd;
 
-	// figure out how many samples are in fifo
+	/*  figure out how many samples are in fifo */
 	hw_counter = i8254_read(dev->iobase + DAS16M1_8254_FIRST, 0, 1);
 	/* make sure hardware counter reading is not bogus due to initial value
 	 * not having been loaded yet */
@@ -542,12 +541,12 @@ static void das16m1_handler(struct comedi_device * dev, unsigned int status)
 		 * hardware counter.  Work it out, and this is what you get. */
 		num_samples = -hw_counter - devpriv->adc_count;
 	}
-	// check if we only need some of the points
+	/*  check if we only need some of the points */
 	if (cmd->stop_src == TRIG_COUNT) {
 		if (num_samples > cmd->stop_arg * cmd->chanlist_len)
 			num_samples = cmd->stop_arg * cmd->chanlist_len;
 	}
-	// make sure we dont try to get too many points if fifo has overrun
+	/*  make sure we dont try to get too many points if fifo has overrun */
 	if (num_samples > FIFO_SIZE)
 		num_samples = FIFO_SIZE;
 	insw(dev->iobase, devpriv->ai_buffer, num_samples);
@@ -578,7 +577,7 @@ static void das16m1_handler(struct comedi_device * dev, unsigned int status)
 /* This function takes a time in nanoseconds and sets the     *
  * 2 pacer clocks to the closest frequency possible. It also  *
  * returns the actual sampling period.                        */
-static unsigned int das16m1_set_pacer(struct comedi_device * dev, unsigned int ns,
+static unsigned int das16m1_set_pacer(struct comedi_device *dev, unsigned int ns,
 	int rounding_flags)
 {
 	i8253_cascade_ns_to_timer_2div(DAS16M1_XTAL, &(devpriv->divisor1),
@@ -626,7 +625,7 @@ static int das16m1_irq_bits(unsigned int irq)
 		return -1;
 		break;
 	}
-	return (ret << 4);
+	return ret << 4;
 }
 
 /*
@@ -635,7 +634,7 @@ static int das16m1_irq_bits(unsigned int irq)
  *   1  IRQ
  */
 
-static int das16m1_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int das16m1_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	int ret;
@@ -646,8 +645,8 @@ static int das16m1_attach(struct comedi_device * dev, struct comedi_devconfig *
 
 	printk("comedi%d: das16m1:", dev->minor);
 
-	if ((ret = alloc_private(dev,
-				sizeof(struct das16m1_private_struct))) < 0)
+	ret = alloc_private(dev, sizeof(struct das16m1_private_struct));
+	if (ret < 0)
 		return ret;
 
 	dev->board_name = thisboard->name;
@@ -669,10 +668,10 @@ static int das16m1_attach(struct comedi_device * dev, struct comedi_devconfig *
 
 	/* now for the irq */
 	irq = it->options[1];
-	// make sure it is valid
+	/*  make sure it is valid */
 	if (das16m1_irq_bits(irq) >= 0) {
-		ret = comedi_request_irq(irq, das16m1_interrupt, 0,
-			driver_das16m1.driver_name, dev);
+		ret = request_irq(irq, das16m1_interrupt, 0,
+				  driver_das16m1.driver_name, dev);
 		if (ret < 0) {
 			printk(", irq unavailable\n");
 			return ret;
@@ -687,7 +686,8 @@ static int das16m1_attach(struct comedi_device * dev, struct comedi_devconfig *
 		return -EINVAL;
 	}
 
-	if ((ret = alloc_subdevices(dev, 4)) < 0)
+	ret = alloc_subdevices(dev, 4);
+	if (ret < 0)
 		return ret;
 
 	s = dev->subdevices + 0;
@@ -728,10 +728,10 @@ static int das16m1_attach(struct comedi_device * dev, struct comedi_devconfig *
 	/* 8255 */
 	subdev_8255_init(dev, s, NULL, dev->iobase + DAS16M1_82C55);
 
-	// disable upper half of hardware conversion counter so it doesn't mess with us
+	/*  disable upper half of hardware conversion counter so it doesn't mess with us */
 	outb(TOTAL_CLEAR, dev->iobase + DAS16M1_8254_FIRST_CNTRL);
 
-	// initialize digital output lines
+	/*  initialize digital output lines */
 	outb(devpriv->do_bits, dev->iobase + DAS16M1_DIO);
 
 	/* set the interrupt level */
@@ -744,17 +744,17 @@ static int das16m1_attach(struct comedi_device * dev, struct comedi_devconfig *
 	return 0;
 }
 
-static int das16m1_detach(struct comedi_device * dev)
+static int das16m1_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: das16m1: remove\n", dev->minor);
 
-//      das16m1_reset(dev);
+/* das16m1_reset(dev); */
 
 	if (dev->subdevices)
 		subdev_8255_cleanup(dev, dev->subdevices + 3);
 
 	if (dev->irq)
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 
 	if (dev->iobase) {
 		release_region(dev->iobase, DAS16M1_SIZE);
diff --git a/drivers/staging/comedi/drivers/das1800.c b/drivers/staging/comedi/drivers/das1800.c
index cd4cd4e6a79..a3434088c9e 100644
--- a/drivers/staging/comedi/drivers/das1800.c
+++ b/drivers/staging/comedi/drivers/das1800.c
@@ -100,6 +100,7 @@ TODO:
 	read insn for analog out
 */
 
+#include <linux/interrupt.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
@@ -108,12 +109,12 @@ TODO:
 #include "8253.h"
 #include "comedi_fc.h"
 
-// misc. defines
-#define DAS1800_SIZE           16	//uses 16 io addresses
-#define FIFO_SIZE              1024	// 1024 sample fifo
-#define TIMER_BASE             200	// 5 Mhz master clock
-#define UNIPOLAR               0x4	// bit that determines whether input range is uni/bipolar
-#define DMA_BUF_SIZE           0x1ff00	// size in bytes of dma buffers
+/* misc. defines */
+#define DAS1800_SIZE           16	/* uses 16 io addresses */
+#define FIFO_SIZE              1024	/*  1024 sample fifo */
+#define TIMER_BASE             200	/*  5 Mhz master clock */
+#define UNIPOLAR               0x4	/*  bit that determines whether input range is uni/bipolar */
+#define DMA_BUF_SIZE           0x1ff00	/*  size in bytes of dma buffers */
 
 /* Registers for the das1800 */
 #define DAS1800_FIFO            0x0
@@ -138,7 +139,7 @@ TODO:
 #define   DMA_CH5_CH6             0x5
 #define   DMA_CH6_CH7             0x6
 #define   DMA_CH7_CH5             0x7
-#define   DMA_ENABLED             0x3	//mask used to determine if dma is enabled
+#define   DMA_ENABLED             0x3	/* mask used to determine if dma is enabled */
 #define   DMA_DUAL                0x4
 #define   IRQ3                    0x8
 #define   IRQ5                    0x10
@@ -156,7 +157,7 @@ TODO:
 #define   SD                      0x40
 #define   UB                      0x80
 #define DAS1800_STATUS          0x7
-// bits that prevent interrupt status bits (and CVEN) from being cleared on write
+/* bits that prevent interrupt status bits (and CVEN) from being cleared on write */
 #define   CLEAR_INTR_MASK         (CVEN_MASK | 0x1f)
 #define   INT                     0x1
 #define   DMATC                   0x2
@@ -164,14 +165,14 @@ TODO:
 #define   OVF                     0x10
 #define   FHF                     0x20
 #define   FNE                     0x40
-#define   CVEN_MASK               0x40	// masks CVEN on write
+#define   CVEN_MASK               0x40	/*  masks CVEN on write */
 #define   CVEN                    0x80
 #define DAS1800_BURST_LENGTH    0x8
 #define DAS1800_BURST_RATE      0x9
 #define DAS1800_QRAM_ADDRESS    0xa
 #define DAS1800_COUNTER         0xc
 
-#define IOBASE2                   0x400	//offset of additional ioports used on 'ao' cards
+#define IOBASE2                   0x400	/* offset of additional ioports used on 'ao' cards */
 
 enum {
 	das1701st, das1701st_da, das1702st, das1702st_da, das1702hr,
@@ -180,39 +181,39 @@ enum {
 	das1802hr, das1802hr_da, das1801hc, das1802hc, das1801ao, das1802ao
 };
 
-static int das1800_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int das1800_detach(struct comedi_device * dev);
-static int das1800_probe(struct comedi_device * dev);
-static int das1800_cancel(struct comedi_device * dev, struct comedi_subdevice * s);
-static irqreturn_t das1800_interrupt(int irq, void *d PT_REGS_ARG);
-static int das1800_ai_poll(struct comedi_device * dev, struct comedi_subdevice * s);
-static void das1800_ai_handler(struct comedi_device * dev);
-static void das1800_handle_dma(struct comedi_device * dev, struct comedi_subdevice * s,
+static int das1800_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int das1800_detach(struct comedi_device *dev);
+static int das1800_probe(struct comedi_device *dev);
+static int das1800_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
+static irqreturn_t das1800_interrupt(int irq, void *d);
+static int das1800_ai_poll(struct comedi_device *dev, struct comedi_subdevice *s);
+static void das1800_ai_handler(struct comedi_device *dev);
+static void das1800_handle_dma(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int status);
-static void das1800_flush_dma(struct comedi_device * dev, struct comedi_subdevice * s);
-static void das1800_flush_dma_channel(struct comedi_device * dev, struct comedi_subdevice * s,
-	unsigned int channel, uint16_t * buffer);
-static void das1800_handle_fifo_half_full(struct comedi_device * dev,
-	struct comedi_subdevice * s);
-static void das1800_handle_fifo_not_empty(struct comedi_device * dev,
-	struct comedi_subdevice * s);
-static int das1800_ai_do_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd);
-static int das1800_ai_do_cmd(struct comedi_device * dev, struct comedi_subdevice * s);
-static int das1800_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int das1800_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int das1800_di_rbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int das1800_do_wbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-
-static int das1800_set_frequency(struct comedi_device * dev);
+static void das1800_flush_dma(struct comedi_device *dev, struct comedi_subdevice *s);
+static void das1800_flush_dma_channel(struct comedi_device *dev, struct comedi_subdevice *s,
+	unsigned int channel, uint16_t *buffer);
+static void das1800_handle_fifo_half_full(struct comedi_device *dev,
+	struct comedi_subdevice *s);
+static void das1800_handle_fifo_not_empty(struct comedi_device *dev,
+	struct comedi_subdevice *s);
+static int das1800_ai_do_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd);
+static int das1800_ai_do_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
+static int das1800_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int das1800_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int das1800_di_rbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int das1800_do_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+
+static int das1800_set_frequency(struct comedi_device *dev);
 static unsigned int burst_convert_arg(unsigned int convert_arg, int round_mode);
-static unsigned int suggest_transfer_size(struct comedi_cmd * cmd);
+static unsigned int suggest_transfer_size(struct comedi_cmd *cmd);
 
-// analog input ranges
+/* analog input ranges */
 static const struct comedi_lrange range_ai_das1801 = {
 	8,
 	{
@@ -259,202 +260,202 @@ struct das1800_board {
  */
 static const struct das1800_board das1800_boards[] = {
 	{
-	      name:	"das-1701st",
-	      ai_speed:6250,
-	      resolution:12,
-	      qram_len:256,
-	      common:	1,
-	      do_n_chan:4,
-	      ao_ability:0,
-	      ao_n_chan:0,
-	      range_ai:&range_ai_das1801,
+	.name = "das-1701st",
+	.ai_speed = 6250,
+	.resolution = 12,
+	.qram_len = 256,
+	.common = 1,
+	.do_n_chan = 4,
+	.ao_ability = 0,
+	.ao_n_chan = 0,
+	.range_ai = &range_ai_das1801,
 		},
 	{
-	      name:	"das-1701st-da",
-	      ai_speed:6250,
-	      resolution:12,
-	      qram_len:256,
-	      common:	1,
-	      do_n_chan:4,
-	      ao_ability:1,
-	      ao_n_chan:4,
-	      range_ai:&range_ai_das1801,
+	.name = "das-1701st-da",
+	.ai_speed = 6250,
+	.resolution = 12,
+	.qram_len = 256,
+	.common = 1,
+	.do_n_chan = 4,
+	.ao_ability = 1,
+	.ao_n_chan = 4,
+	.range_ai = &range_ai_das1801,
 		},
 	{
-	      name:	"das-1702st",
-	      ai_speed:6250,
-	      resolution:12,
-	      qram_len:256,
-	      common:	1,
-	      do_n_chan:4,
-	      ao_ability:0,
-	      ao_n_chan:0,
-	      range_ai:&range_ai_das1802,
+	.name = "das-1702st",
+	.ai_speed = 6250,
+	.resolution = 12,
+	.qram_len = 256,
+	.common = 1,
+	.do_n_chan = 4,
+	.ao_ability = 0,
+	.ao_n_chan = 0,
+	.range_ai = &range_ai_das1802,
 		},
 	{
-	      name:	"das-1702st-da",
-	      ai_speed:6250,
-	      resolution:12,
-	      qram_len:256,
-	      common:	1,
-	      do_n_chan:4,
-	      ao_ability:1,
-	      ao_n_chan:4,
-	      range_ai:&range_ai_das1802,
+	.name = "das-1702st-da",
+	.ai_speed = 6250,
+	.resolution = 12,
+	.qram_len = 256,
+	.common = 1,
+	.do_n_chan = 4,
+	.ao_ability = 1,
+	.ao_n_chan = 4,
+	.range_ai = &range_ai_das1802,
 		},
 	{
-	      name:	"das-1702hr",
-	      ai_speed:20000,
-	      resolution:16,
-	      qram_len:256,
-	      common:	1,
-	      do_n_chan:4,
-	      ao_ability:0,
-	      ao_n_chan:0,
-	      range_ai:&range_ai_das1802,
+	.name = "das-1702hr",
+	.ai_speed = 20000,
+	.resolution = 16,
+	.qram_len = 256,
+	.common = 1,
+	.do_n_chan = 4,
+	.ao_ability = 0,
+	.ao_n_chan = 0,
+	.range_ai = &range_ai_das1802,
 		},
 	{
-	      name:	"das-1702hr-da",
-	      ai_speed:20000,
-	      resolution:16,
-	      qram_len:256,
-	      common:	1,
-	      do_n_chan:4,
-	      ao_ability:1,
-	      ao_n_chan:2,
-	      range_ai:&range_ai_das1802,
+	.name = "das-1702hr-da",
+	.ai_speed = 20000,
+	.resolution = 16,
+	.qram_len = 256,
+	.common = 1,
+	.do_n_chan = 4,
+	.ao_ability = 1,
+	.ao_n_chan = 2,
+	.range_ai = &range_ai_das1802,
 		},
 	{
-	      name:	"das-1701ao",
-	      ai_speed:6250,
-	      resolution:12,
-	      qram_len:256,
-	      common:	1,
-	      do_n_chan:4,
-	      ao_ability:2,
-	      ao_n_chan:2,
-	      range_ai:&range_ai_das1801,
+	.name = "das-1701ao",
+	.ai_speed = 6250,
+	.resolution = 12,
+	.qram_len = 256,
+	.common = 1,
+	.do_n_chan = 4,
+	.ao_ability = 2,
+	.ao_n_chan = 2,
+	.range_ai = &range_ai_das1801,
 		},
 	{
-	      name:	"das-1702ao",
-	      ai_speed:6250,
-	      resolution:12,
-	      qram_len:256,
-	      common:	1,
-	      do_n_chan:4,
-	      ao_ability:2,
-	      ao_n_chan:2,
-	      range_ai:&range_ai_das1802,
+	.name = "das-1702ao",
+	.ai_speed = 6250,
+	.resolution = 12,
+	.qram_len = 256,
+	.common = 1,
+	.do_n_chan = 4,
+	.ao_ability = 2,
+	.ao_n_chan = 2,
+	.range_ai = &range_ai_das1802,
 		},
 	{
-	      name:	"das-1801st",
-	      ai_speed:3000,
-	      resolution:12,
-	      qram_len:256,
-	      common:	1,
-	      do_n_chan:4,
-	      ao_ability:0,
-	      ao_n_chan:0,
-	      range_ai:&range_ai_das1801,
+	.name = "das-1801st",
+	.ai_speed = 3000,
+	.resolution = 12,
+	.qram_len = 256,
+	.common = 1,
+	.do_n_chan = 4,
+	.ao_ability = 0,
+	.ao_n_chan = 0,
+	.range_ai = &range_ai_das1801,
 		},
 	{
-	      name:	"das-1801st-da",
-	      ai_speed:3000,
-	      resolution:12,
-	      qram_len:256,
-	      common:	1,
-	      do_n_chan:4,
-	      ao_ability:0,
-	      ao_n_chan:4,
-	      range_ai:&range_ai_das1801,
+	.name = "das-1801st-da",
+	.ai_speed = 3000,
+	.resolution = 12,
+	.qram_len = 256,
+	.common = 1,
+	.do_n_chan = 4,
+	.ao_ability = 0,
+	.ao_n_chan = 4,
+	.range_ai = &range_ai_das1801,
 		},
 	{
-	      name:	"das-1802st",
-	      ai_speed:3000,
-	      resolution:12,
-	      qram_len:256,
-	      common:	1,
-	      do_n_chan:4,
-	      ao_ability:0,
-	      ao_n_chan:0,
-	      range_ai:&range_ai_das1802,
+	.name = "das-1802st",
+	.ai_speed = 3000,
+	.resolution = 12,
+	.qram_len = 256,
+	.common = 1,
+	.do_n_chan = 4,
+	.ao_ability = 0,
+	.ao_n_chan = 0,
+	.range_ai = &range_ai_das1802,
 		},
 	{
-	      name:	"das-1802st-da",
-	      ai_speed:3000,
-	      resolution:12,
-	      qram_len:256,
-	      common:	1,
-	      do_n_chan:4,
-	      ao_ability:1,
-	      ao_n_chan:4,
-	      range_ai:&range_ai_das1802,
+	.name = "das-1802st-da",
+	.ai_speed = 3000,
+	.resolution = 12,
+	.qram_len = 256,
+	.common = 1,
+	.do_n_chan = 4,
+	.ao_ability = 1,
+	.ao_n_chan = 4,
+	.range_ai = &range_ai_das1802,
 		},
 	{
-	      name:	"das-1802hr",
-	      ai_speed:10000,
-	      resolution:16,
-	      qram_len:256,
-	      common:	1,
-	      do_n_chan:4,
-	      ao_ability:0,
-	      ao_n_chan:0,
-	      range_ai:&range_ai_das1802,
+	.name = "das-1802hr",
+	.ai_speed = 10000,
+	.resolution = 16,
+	.qram_len = 256,
+	.common = 1,
+	.do_n_chan = 4,
+	.ao_ability = 0,
+	.ao_n_chan = 0,
+	.range_ai = &range_ai_das1802,
 		},
 	{
-	      name:	"das-1802hr-da",
-	      ai_speed:10000,
-	      resolution:16,
-	      qram_len:256,
-	      common:	1,
-	      do_n_chan:4,
-	      ao_ability:1,
-	      ao_n_chan:2,
-	      range_ai:&range_ai_das1802,
+	.name = "das-1802hr-da",
+	.ai_speed = 10000,
+	.resolution = 16,
+	.qram_len = 256,
+	.common = 1,
+	.do_n_chan = 4,
+	.ao_ability = 1,
+	.ao_n_chan = 2,
+	.range_ai = &range_ai_das1802,
 		},
 	{
-	      name:	"das-1801hc",
-	      ai_speed:3000,
-	      resolution:12,
-	      qram_len:64,
-	      common:	0,
-	      do_n_chan:8,
-	      ao_ability:1,
-	      ao_n_chan:2,
-	      range_ai:&range_ai_das1801,
+	.name = "das-1801hc",
+	.ai_speed = 3000,
+	.resolution = 12,
+	.qram_len = 64,
+	.common = 0,
+	.do_n_chan = 8,
+	.ao_ability = 1,
+	.ao_n_chan = 2,
+	.range_ai = &range_ai_das1801,
 		},
 	{
-	      name:	"das-1802hc",
-	      ai_speed:3000,
-	      resolution:12,
-	      qram_len:64,
-	      common:	0,
-	      do_n_chan:8,
-	      ao_ability:1,
-	      ao_n_chan:2,
-	      range_ai:&range_ai_das1802,
+	.name = "das-1802hc",
+	.ai_speed = 3000,
+	.resolution = 12,
+	.qram_len = 64,
+	.common = 0,
+	.do_n_chan = 8,
+	.ao_ability = 1,
+	.ao_n_chan = 2,
+	.range_ai = &range_ai_das1802,
 		},
 	{
-	      name:	"das-1801ao",
-	      ai_speed:3000,
-	      resolution:12,
-	      qram_len:256,
-	      common:	1,
-	      do_n_chan:4,
-	      ao_ability:2,
-	      ao_n_chan:2,
-	      range_ai:&range_ai_das1801,
+	.name = "das-1801ao",
+	.ai_speed = 3000,
+	.resolution = 12,
+	.qram_len = 256,
+	.common = 1,
+	.do_n_chan = 4,
+	.ao_ability = 2,
+	.ao_n_chan = 2,
+	.range_ai = &range_ai_das1801,
 		},
 	{
-	      name:	"das-1802ao",
-	      ai_speed:3000,
-	      resolution:12,
-	      qram_len:256,
-	      common:	1,
-	      do_n_chan:4,
-	      ao_ability:2,
-	      ao_n_chan:2,
-	      range_ai:&range_ai_das1802,
+	.name = "das-1802ao",
+	.ai_speed = 3000,
+	.resolution = 12,
+	.qram_len = 256,
+	.common = 1,
+	.do_n_chan = 4,
+	.ao_ability = 2,
+	.ao_n_chan = 2,
+	.range_ai = &range_ai_das1802,
 		},
 };
 
@@ -485,7 +486,7 @@ struct das1800_private {
 
 #define devpriv ((struct das1800_private *)dev->private)
 
-// analog out range for boards with basic analog out
+/* analog out range for boards with basic analog out */
 static const struct comedi_lrange range_ao_1 = {
 	1,
 	{
@@ -493,7 +494,7 @@ static const struct comedi_lrange range_ao_1 = {
 		}
 };
 
-// analog out range for 'ao' boards
+/* analog out range for 'ao' boards */
 /*
 static const struct comedi_lrange range_ao_2 = {
 	2,
@@ -505,13 +506,13 @@ static const struct comedi_lrange range_ao_2 = {
 */
 
 static struct comedi_driver driver_das1800 = {
-      driver_name:"das1800",
-      module:THIS_MODULE,
-      attach:das1800_attach,
-      detach:das1800_detach,
-      num_names:sizeof(das1800_boards) / sizeof(struct das1800_board),
-      board_name:&das1800_boards[0].name,
-      offset:sizeof(struct das1800_board),
+	.driver_name = "das1800",
+	.module = THIS_MODULE,
+	.attach = das1800_attach,
+	.detach = das1800_detach,
+	.num_names = ARRAY_SIZE(das1800_boards),
+	.board_name = &das1800_boards[0].name,
+	.offset = sizeof(struct das1800_board),
 };
 
 /*
@@ -520,31 +521,31 @@ static struct comedi_driver driver_das1800 = {
  */
 COMEDI_INITCLEANUP(driver_das1800);
 
-static int das1800_init_dma(struct comedi_device * dev, unsigned int dma0,
+static int das1800_init_dma(struct comedi_device *dev, unsigned int dma0,
 	unsigned int dma1)
 {
 	unsigned long flags;
 
-	// need an irq to do dma
+	/*  need an irq to do dma */
 	if (dev->irq && dma0) {
-		//encode dma0 and dma1 into 2 digit hexadecimal for switch
+		/* encode dma0 and dma1 into 2 digit hexadecimal for switch */
 		switch ((dma0 & 0x7) | (dma1 << 4)) {
-		case 0x5:	// dma0 == 5
+		case 0x5:	/*  dma0 == 5 */
 			devpriv->dma_bits |= DMA_CH5;
 			break;
-		case 0x6:	// dma0 == 6
+		case 0x6:	/*  dma0 == 6 */
 			devpriv->dma_bits |= DMA_CH6;
 			break;
-		case 0x7:	// dma0 == 7
+		case 0x7:	/*  dma0 == 7 */
 			devpriv->dma_bits |= DMA_CH7;
 			break;
-		case 0x65:	// dma0 == 5, dma1 == 6
+		case 0x65:	/*  dma0 == 5, dma1 == 6 */
 			devpriv->dma_bits |= DMA_CH5_CH6;
 			break;
-		case 0x76:	// dma0 == 6, dma1 == 7
+		case 0x76:	/*  dma0 == 6, dma1 == 7 */
 			devpriv->dma_bits |= DMA_CH6_CH7;
 			break;
-		case 0x57:	// dma0 == 7, dma1 == 5
+		case 0x57:	/*  dma0 == 7, dma1 == 5 */
 			devpriv->dma_bits |= DMA_CH7_CH5;
 			break;
 		default:
@@ -590,7 +591,7 @@ static int das1800_init_dma(struct comedi_device * dev, unsigned int dma0,
 	return 0;
 }
 
-static int das1800_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int das1800_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	unsigned long iobase = it->options[0];
@@ -638,7 +639,7 @@ static int das1800_attach(struct comedi_device * dev, struct comedi_devconfig *
 	dev->board_ptr = das1800_boards + board;
 	dev->board_name = thisboard->name;
 
-	// if it is an 'ao' board with fancy analog out then we need extra io ports
+	/*  if it is an 'ao' board with fancy analog out then we need extra io ports */
 	if (thisboard->ao_ability == 2) {
 		iobase2 = iobase + IOBASE2;
 		if (!request_region(iobase2, DAS1800_SIZE,
@@ -651,7 +652,7 @@ static int das1800_attach(struct comedi_device * dev, struct comedi_devconfig *
 
 	/* grab our IRQ */
 	if (irq) {
-		if (comedi_request_irq(irq, das1800_interrupt, 0,
+		if (request_irq(irq, das1800_interrupt, 0,
 				driver_das1800.driver_name, dev)) {
 			printk(" unable to allocate irq %u\n", irq);
 			return -EINVAL;
@@ -659,7 +660,7 @@ static int das1800_attach(struct comedi_device * dev, struct comedi_devconfig *
 	}
 	dev->irq = irq;
 
-	// set bits that tell card which irq to use
+	/*  set bits that tell card which irq to use */
 	switch (irq) {
 	case 0:
 		break;
@@ -751,12 +752,12 @@ static int das1800_attach(struct comedi_device * dev, struct comedi_devconfig *
 
 	das1800_cancel(dev, dev->read_subdev);
 
-	// initialize digital out channels
+	/*  initialize digital out channels */
 	outb(devpriv->do_bits, dev->iobase + DAS1800_DIGITAL);
 
-	// initialize analog out channels
+	/*  initialize analog out channels */
 	if (thisboard->ao_ability == 1) {
-		// select 'update' dac channel for baseAddress + 0x0
+		/*  select 'update' dac channel for baseAddress + 0x0 */
 		outb(DAC(thisboard->ao_n_chan - 1),
 			dev->iobase + DAS1800_SELECT);
 		outw(devpriv->ao_update_bits, dev->iobase + DAS1800_DAC);
@@ -765,13 +766,13 @@ static int das1800_attach(struct comedi_device * dev, struct comedi_devconfig *
 	return 0;
 };
 
-static int das1800_detach(struct comedi_device * dev)
+static int das1800_detach(struct comedi_device *dev)
 {
 	/* only free stuff if it has been allocated by _attach */
 	if (dev->iobase)
 		release_region(dev->iobase, DAS1800_SIZE);
 	if (dev->irq)
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 	if (dev->private) {
 		if (devpriv->iobase2)
 			release_region(devpriv->iobase2, DAS1800_SIZE);
@@ -793,7 +794,7 @@ static int das1800_detach(struct comedi_device * dev)
 
 /* probes and checks das-1800 series board type
  */
-static int das1800_probe(struct comedi_device * dev)
+static int das1800_probe(struct comedi_device *dev)
 {
 	int id;
 	int board;
@@ -867,19 +868,19 @@ static int das1800_probe(struct comedi_device * dev)
 	return -1;
 }
 
-static int das1800_ai_poll(struct comedi_device * dev, struct comedi_subdevice * s)
+static int das1800_ai_poll(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	unsigned long flags;
 
-	// prevent race with interrupt handler
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	/*  prevent race with interrupt handler */
+	spin_lock_irqsave(&dev->spinlock, flags);
 	das1800_ai_handler(dev);
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
 	return s->async->buf_write_count - s->async->buf_read_count;
 }
 
-static irqreturn_t das1800_interrupt(int irq, void *d PT_REGS_ARG)
+static irqreturn_t das1800_interrupt(int irq, void *d)
 {
 	struct comedi_device *dev = d;
 	unsigned int status;
@@ -901,15 +902,15 @@ static irqreturn_t das1800_interrupt(int irq, void *d PT_REGS_ARG)
 	}
 	/* clear the interrupt status bit INT */
 	outb(CLEAR_INTR_MASK & ~INT, dev->iobase + DAS1800_STATUS);
-	// handle interrupt
+	/*  handle interrupt */
 	das1800_ai_handler(dev);
 
 	spin_unlock(&dev->spinlock);
 	return IRQ_HANDLED;
 }
 
-// the guts of the interrupt handler, that is shared with das1800_ai_poll
-static void das1800_ai_handler(struct comedi_device * dev)
+/* the guts of the interrupt handler, that is shared with das1800_ai_poll */
+static void das1800_ai_handler(struct comedi_device *dev)
 {
 	struct comedi_subdevice *s = dev->subdevices + 0;	/* analog input subdevice */
 	struct comedi_async *async = s->async;
@@ -917,22 +918,22 @@ static void das1800_ai_handler(struct comedi_device * dev)
 	unsigned int status = inb(dev->iobase + DAS1800_STATUS);
 
 	async->events = 0;
-	// select adc for base address + 0
+	/*  select adc for base address + 0 */
 	outb(ADC, dev->iobase + DAS1800_SELECT);
-	// dma buffer full
+	/*  dma buffer full */
 	if (devpriv->irq_dma_bits & DMA_ENABLED) {
-		// look for data from dma transfer even if dma terminal count hasn't happened yet
+		/*  look for data from dma transfer even if dma terminal count hasn't happened yet */
 		das1800_handle_dma(dev, s, status);
-	} else if (status & FHF) {	// if fifo half full
+	} else if (status & FHF) {	/*  if fifo half full */
 		das1800_handle_fifo_half_full(dev, s);
-	} else if (status & FNE) {	// if fifo not empty
+	} else if (status & FNE) {	/*  if fifo not empty */
 		das1800_handle_fifo_not_empty(dev, s);
 	}
 
 	async->events |= COMEDI_CB_BLOCK;
 	/* if the card's fifo has overflowed */
 	if (status & OVF) {
-		// clear OVF interrupt bit
+		/*  clear OVF interrupt bit */
 		outb(CLEAR_INTR_MASK & ~OVF, dev->iobase + DAS1800_STATUS);
 		comedi_error(dev, "DAS1800 FIFO overflow");
 		das1800_cancel(dev, s);
@@ -940,19 +941,19 @@ static void das1800_ai_handler(struct comedi_device * dev)
 		comedi_event(dev, s);
 		return;
 	}
-	// stop taking data if appropriate
+	/*  stop taking data if appropriate */
 	/* stop_src TRIG_EXT */
 	if (status & CT0TC) {
-		// clear CT0TC interrupt bit
+		/*  clear CT0TC interrupt bit */
 		outb(CLEAR_INTR_MASK & ~CT0TC, dev->iobase + DAS1800_STATUS);
-		// make sure we get all remaining data from board before quitting
+		/*  make sure we get all remaining data from board before quitting */
 		if (devpriv->irq_dma_bits & DMA_ENABLED)
 			das1800_flush_dma(dev, s);
 		else
 			das1800_handle_fifo_not_empty(dev, s);
 		das1800_cancel(dev, s);	/* disable hardware conversions */
 		async->events |= COMEDI_CB_EOA;
-	} else if (cmd->stop_src == TRIG_COUNT && devpriv->count == 0) {	// stop_src TRIG_COUNT
+	} else if (cmd->stop_src == TRIG_COUNT && devpriv->count == 0) {	/*  stop_src TRIG_COUNT */
 		das1800_cancel(dev, s);	/* disable hardware conversions */
 		async->events |= COMEDI_CB_EOA;
 	}
@@ -962,7 +963,7 @@ static void das1800_ai_handler(struct comedi_device * dev)
 	return;
 }
 
-static void das1800_handle_dma(struct comedi_device * dev, struct comedi_subdevice * s,
+static void das1800_handle_dma(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int status)
 {
 	unsigned long flags;
@@ -971,7 +972,7 @@ static void das1800_handle_dma(struct comedi_device * dev, struct comedi_subdevi
 	flags = claim_dma_lock();
 	das1800_flush_dma_channel(dev, s, devpriv->dma_current,
 		devpriv->dma_current_buf);
-	// re-enable  dma channel
+	/*  re-enable  dma channel */
 	set_dma_addr(devpriv->dma_current,
 		virt_to_bus(devpriv->dma_current_buf));
 	set_dma_count(devpriv->dma_current, devpriv->dma_transfer_size);
@@ -979,11 +980,11 @@ static void das1800_handle_dma(struct comedi_device * dev, struct comedi_subdevi
 	release_dma_lock(flags);
 
 	if (status & DMATC) {
-		// clear DMATC interrupt bit
+		/*  clear DMATC interrupt bit */
 		outb(CLEAR_INTR_MASK & ~DMATC, dev->iobase + DAS1800_STATUS);
-		// switch dma channels for next time, if appropriate
+		/*  switch dma channels for next time, if appropriate */
 		if (dual_dma) {
-			// read data from the other channel next time
+			/*  read data from the other channel next time */
 			if (devpriv->dma_current == devpriv->dma0) {
 				devpriv->dma_current = devpriv->dma1;
 				devpriv->dma_current_buf = devpriv->ai_buf1;
@@ -997,14 +998,14 @@ static void das1800_handle_dma(struct comedi_device * dev, struct comedi_subdevi
 	return;
 }
 
-static inline uint16_t munge_bipolar_sample(const struct comedi_device * dev,
+static inline uint16_t munge_bipolar_sample(const struct comedi_device *dev,
 	uint16_t sample)
 {
 	sample += 1 << (thisboard->resolution - 1);
 	return sample;
 }
 
-static void munge_data(struct comedi_device * dev, uint16_t * array,
+static void munge_data(struct comedi_device *dev, uint16_t *array,
 	unsigned int num_elements)
 {
 	unsigned int i;
@@ -1023,8 +1024,8 @@ static void munge_data(struct comedi_device * dev, uint16_t * array,
 
 /* Utility function used by das1800_flush_dma() and das1800_handle_dma().
  * Assumes dma lock is held */
-static void das1800_flush_dma_channel(struct comedi_device * dev, struct comedi_subdevice * s,
-	unsigned int channel, uint16_t * buffer)
+static void das1800_flush_dma_channel(struct comedi_device *dev, struct comedi_subdevice *s,
+	unsigned int channel, uint16_t *buffer)
 {
 	unsigned int num_bytes, num_samples;
 	struct comedi_cmd *cmd = &s->async->cmd;
@@ -1035,7 +1036,7 @@ static void das1800_flush_dma_channel(struct comedi_device * dev, struct comedi_
 	 * get set correctly */
 	clear_dma_ff(channel);
 
-	// figure out how many points to read
+	/*  figure out how many points to read */
 	num_bytes = devpriv->dma_transfer_size - get_dma_residue(channel);
 	num_samples = num_bytes / sizeof(short);
 
@@ -1053,7 +1054,7 @@ static void das1800_flush_dma_channel(struct comedi_device * dev, struct comedi_
 
 /* flushes remaining data from board when external trigger has stopped aquisition
  * and we are using dma transfers */
-static void das1800_flush_dma(struct comedi_device * dev, struct comedi_subdevice * s)
+static void das1800_flush_dma(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	unsigned long flags;
 	const int dual_dma = devpriv->irq_dma_bits & DMA_DUAL;
@@ -1063,7 +1064,7 @@ static void das1800_flush_dma(struct comedi_device * dev, struct comedi_subdevic
 		devpriv->dma_current_buf);
 
 	if (dual_dma) {
-		// switch to other channel and flush it
+		/*  switch to other channel and flush it */
 		if (devpriv->dma_current == devpriv->dma0) {
 			devpriv->dma_current = devpriv->dma1;
 			devpriv->dma_current_buf = devpriv->ai_buf1;
@@ -1077,14 +1078,14 @@ static void das1800_flush_dma(struct comedi_device * dev, struct comedi_subdevic
 
 	release_dma_lock(flags);
 
-	// get any remaining samples in fifo
+	/*  get any remaining samples in fifo */
 	das1800_handle_fifo_not_empty(dev, s);
 
 	return;
 }
 
-static void das1800_handle_fifo_half_full(struct comedi_device * dev,
-	struct comedi_subdevice * s)
+static void das1800_handle_fifo_half_full(struct comedi_device *dev,
+	struct comedi_subdevice *s)
 {
 	int numPoints = 0;	/* number of points to read */
 	struct comedi_cmd *cmd = &s->async->cmd;
@@ -1102,8 +1103,8 @@ static void das1800_handle_fifo_half_full(struct comedi_device * dev,
 	return;
 }
 
-static void das1800_handle_fifo_not_empty(struct comedi_device * dev,
-	struct comedi_subdevice * s)
+static void das1800_handle_fifo_not_empty(struct comedi_device *dev,
+	struct comedi_subdevice *s)
 {
 	short dpnt;
 	int unipolar;
@@ -1126,7 +1127,7 @@ static void das1800_handle_fifo_not_empty(struct comedi_device * dev,
 	return;
 }
 
-static int das1800_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int das1800_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	outb(0x0, dev->iobase + DAS1800_STATUS);	/* disable conversions */
 	outb(0x0, dev->iobase + DAS1800_CONTROL_B);	/* disable interrupts and dma */
@@ -1139,8 +1140,8 @@ static int das1800_cancel(struct comedi_device * dev, struct comedi_subdevice *
 }
 
 /* test analog input cmd */
-static int das1800_ai_do_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int das1800_ai_do_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	int tmp;
@@ -1180,7 +1181,7 @@ static int das1800_ai_do_cmdtest(struct comedi_device * dev, struct comedi_subde
 
 	/* step 2: make sure trigger sources are unique and mutually compatible */
 
-	// uniqueness check
+	/*  uniqueness check */
 	if (cmd->start_src != TRIG_NOW && cmd->start_src != TRIG_EXT)
 		err++;
 	if (cmd->scan_begin_src != TRIG_FOLLOW &&
@@ -1192,7 +1193,7 @@ static int das1800_ai_do_cmdtest(struct comedi_device * dev, struct comedi_subde
 	if (cmd->stop_src != TRIG_COUNT &&
 		cmd->stop_src != TRIG_NONE && cmd->stop_src != TRIG_EXT)
 		err++;
-	//compatibility check
+	/* compatibility check */
 	if (cmd->scan_begin_src != TRIG_FOLLOW &&
 		cmd->convert_src != TRIG_TIMER)
 		err++;
@@ -1244,7 +1245,7 @@ static int das1800_ai_do_cmdtest(struct comedi_device * dev, struct comedi_subde
 	/* step 4: fix up any arguments */
 
 	if (cmd->convert_src == TRIG_TIMER) {
-		// if we are not in burst mode
+		/*  if we are not in burst mode */
 		if (cmd->scan_begin_src == TRIG_FOLLOW) {
 			tmp_arg = cmd->convert_arg;
 			/* calculate counter values that give desired timing */
@@ -1255,9 +1256,9 @@ static int das1800_ai_do_cmdtest(struct comedi_device * dev, struct comedi_subde
 			if (tmp_arg != cmd->convert_arg)
 				err++;
 		}
-		// if we are in burst mode
+		/*  if we are in burst mode */
 		else {
-			// check that convert_arg is compatible
+			/*  check that convert_arg is compatible */
 			tmp_arg = cmd->convert_arg;
 			cmd->convert_arg =
 				burst_convert_arg(cmd->convert_arg,
@@ -1266,7 +1267,7 @@ static int das1800_ai_do_cmdtest(struct comedi_device * dev, struct comedi_subde
 				err++;
 
 			if (cmd->scan_begin_src == TRIG_TIMER) {
-				// if scans are timed faster than conversion rate allows
+				/*  if scans are timed faster than conversion rate allows */
 				if (cmd->convert_arg * cmd->chanlist_len >
 					cmd->scan_begin_arg) {
 					cmd->scan_begin_arg =
@@ -1290,7 +1291,7 @@ static int das1800_ai_do_cmdtest(struct comedi_device * dev, struct comedi_subde
 	if (err)
 		return 4;
 
-	// make sure user is not trying to mix unipolar and bipolar ranges
+	/*  make sure user is not trying to mix unipolar and bipolar ranges */
 	if (cmd->chanlist) {
 		unipolar = CR_RANGE(cmd->chanlist[0]) & UNIPOLAR;
 		for (i = 1; i < cmd->chanlist_len; i++) {
@@ -1311,14 +1312,14 @@ static int das1800_ai_do_cmdtest(struct comedi_device * dev, struct comedi_subde
 
 /* analog input cmd interface */
 
-// first, some utility functions used in the main ai_do_cmd()
+/* first, some utility functions used in the main ai_do_cmd() */
 
-// returns appropriate bits for control register a, depending on command
+/* returns appropriate bits for control register a, depending on command */
 static int control_a_bits(struct comedi_cmd cmd)
 {
 	int control_a;
 
-	control_a = FFEN;	//enable fifo
+	control_a = FFEN;	/* enable fifo */
 	if (cmd.stop_src == TRIG_EXT) {
 		control_a |= ATEN;
 	}
@@ -1336,7 +1337,7 @@ static int control_a_bits(struct comedi_cmd cmd)
 	return control_a;
 }
 
-// returns appropriate bits for control register c, depending on command
+/* returns appropriate bits for control register c, depending on command */
 static int control_c_bits(struct comedi_cmd cmd)
 {
 	int control_c;
@@ -1346,7 +1347,7 @@ static int control_c_bits(struct comedi_cmd cmd)
 	 * select unipolar / bipolar
 	 */
 	aref = CR_AREF(cmd.chanlist[0]);
-	control_c = UQEN;	//enable upper qram addresses
+	control_c = UQEN;	/* enable upper qram addresses */
 	if (aref != AREF_DIFF)
 		control_c |= SD;
 	if (aref == AREF_COMMON)
@@ -1355,7 +1356,7 @@ static int control_c_bits(struct comedi_cmd cmd)
 	if (CR_RANGE(cmd.chanlist[0]) & UNIPOLAR)
 		control_c |= UB;
 	switch (cmd.scan_begin_src) {
-	case TRIG_FOLLOW:	// not in burst mode
+	case TRIG_FOLLOW:	/*  not in burst mode */
 		switch (cmd.convert_src) {
 		case TRIG_TIMER:
 			/* trig on cascaded counters */
@@ -1370,11 +1371,11 @@ static int control_c_bits(struct comedi_cmd cmd)
 		}
 		break;
 	case TRIG_TIMER:
-		// burst mode with internal pacer clock
+		/*  burst mode with internal pacer clock */
 		control_c |= BMDE | IPCLK;
 		break;
 	case TRIG_EXT:
-		// burst mode with external trigger
+		/*  burst mode with external trigger */
 		control_c |= BMDE | XPCLK;
 		break;
 	default:
@@ -1384,12 +1385,12 @@ static int control_c_bits(struct comedi_cmd cmd)
 	return control_c;
 }
 
-// sets up counters
-static int setup_counters(struct comedi_device * dev, struct comedi_cmd cmd)
+/* sets up counters */
+static int setup_counters(struct comedi_device *dev, struct comedi_cmd cmd)
 {
-	// setup cascaded counters for conversion/scan frequency
+	/*  setup cascaded counters for conversion/scan frequency */
 	switch (cmd.scan_begin_src) {
-	case TRIG_FOLLOW:	// not in burst mode
+	case TRIG_FOLLOW:	/*  not in burst mode */
 		if (cmd.convert_src == TRIG_TIMER) {
 			/* set conversion frequency */
 			i8253_cascade_ns_to_timer_2div(TIMER_BASE,
@@ -1401,7 +1402,7 @@ static int setup_counters(struct comedi_device * dev, struct comedi_cmd cmd)
 			}
 		}
 		break;
-	case TRIG_TIMER:	// in burst mode
+	case TRIG_TIMER:	/*  in burst mode */
 		/* set scan frequency */
 		i8253_cascade_ns_to_timer_2div(TIMER_BASE, &(devpriv->divisor1),
 			&(devpriv->divisor2), &(cmd.scan_begin_arg),
@@ -1414,17 +1415,17 @@ static int setup_counters(struct comedi_device * dev, struct comedi_cmd cmd)
 		break;
 	}
 
-	// setup counter 0 for 'about triggering'
+	/*  setup counter 0 for 'about triggering' */
 	if (cmd.stop_src == TRIG_EXT) {
-		// load counter 0 in mode 0
+		/*  load counter 0 in mode 0 */
 		i8254_load(dev->iobase + DAS1800_COUNTER, 0, 0, 1, 0);
 	}
 
 	return 0;
 }
 
-// sets up dma
-static void setup_dma(struct comedi_device * dev, struct comedi_cmd cmd)
+/* sets up dma */
+static void setup_dma(struct comedi_device *dev, struct comedi_cmd cmd)
 {
 	unsigned long lock_flags;
 	const int dual_dma = devpriv->irq_dma_bits & DMA_DUAL;
@@ -1440,19 +1441,19 @@ static void setup_dma(struct comedi_device * dev, struct comedi_cmd cmd)
 	 * count and address get set correctly */
 	clear_dma_ff(devpriv->dma0);
 	set_dma_addr(devpriv->dma0, virt_to_bus(devpriv->ai_buf0));
-	// set appropriate size of transfer
+	/*  set appropriate size of transfer */
 	set_dma_count(devpriv->dma0, devpriv->dma_transfer_size);
 	devpriv->dma_current = devpriv->dma0;
 	devpriv->dma_current_buf = devpriv->ai_buf0;
 	enable_dma(devpriv->dma0);
-	// set up dual dma if appropriate
+	/*  set up dual dma if appropriate */
 	if (dual_dma) {
 		disable_dma(devpriv->dma1);
 		/* clear flip-flop to make sure 2-byte registers for
 		 * count and address get set correctly */
 		clear_dma_ff(devpriv->dma1);
 		set_dma_addr(devpriv->dma1, virt_to_bus(devpriv->ai_buf1));
-		// set appropriate size of transfer
+		/*  set appropriate size of transfer */
 		set_dma_count(devpriv->dma1, devpriv->dma_transfer_size);
 		enable_dma(devpriv->dma1);
 	}
@@ -1461,17 +1462,17 @@ static void setup_dma(struct comedi_device * dev, struct comedi_cmd cmd)
 	return;
 }
 
-// programs channel/gain list into card
-static void program_chanlist(struct comedi_device * dev, struct comedi_cmd cmd)
+/* programs channel/gain list into card */
+static void program_chanlist(struct comedi_device *dev, struct comedi_cmd cmd)
 {
 	int i, n, chan_range;
 	unsigned long irq_flags;
-	const int range_mask = 0x3;	//masks unipolar/bipolar bit off range
+	const int range_mask = 0x3;	/* masks unipolar/bipolar bit off range */
 	const int range_bitshift = 8;
 
 	n = cmd.chanlist_len;
-	// spinlock protects indirect addressing
-	comedi_spin_lock_irqsave(&dev->spinlock, irq_flags);
+	/*  spinlock protects indirect addressing */
+	spin_lock_irqsave(&dev->spinlock, irq_flags);
 	outb(QRAM, dev->iobase + DAS1800_SELECT);	/* select QRAM for baseAddress + 0x0 */
 	outb(n - 1, dev->iobase + DAS1800_QRAM_ADDRESS);	/*set QRAM address start */
 	/* make channel / gain list */
@@ -1483,13 +1484,13 @@ static void program_chanlist(struct comedi_device * dev, struct comedi_cmd cmd)
 		outw(chan_range, dev->iobase + DAS1800_QRAM);
 	}
 	outb(n - 1, dev->iobase + DAS1800_QRAM_ADDRESS);	/*finish write to QRAM */
-	comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+	spin_unlock_irqrestore(&dev->spinlock, irq_flags);
 
 	return;
 }
 
-// analog input do_cmd
-static int das1800_ai_do_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+/* analog input do_cmd */
+static int das1800_ai_do_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	int ret;
 	int control_a, control_c;
@@ -1509,22 +1510,22 @@ static int das1800_ai_do_cmd(struct comedi_device * dev, struct comedi_subdevice
 	} else {
 		devpriv->irq_dma_bits |= devpriv->dma_bits;
 	}
-	// interrupt on end of conversion for TRIG_WAKE_EOS
+	/*  interrupt on end of conversion for TRIG_WAKE_EOS */
 	if (cmd.flags & TRIG_WAKE_EOS) {
-		// interrupt fifo not empty
+		/*  interrupt fifo not empty */
 		devpriv->irq_dma_bits &= ~FIMD;
 	} else {
-		// interrupt fifo half full
+		/*  interrupt fifo half full */
 		devpriv->irq_dma_bits |= FIMD;
 	}
-	// determine how many conversions we need
+	/*  determine how many conversions we need */
 	if (cmd.stop_src == TRIG_COUNT) {
 		devpriv->count = cmd.stop_arg * cmd.chanlist_len;
 	}
 
 	das1800_cancel(dev, s);
 
-	// determine proper bits for control registers
+	/*  determine proper bits for control registers */
 	control_a = control_a_bits(cmd);
 	control_c = control_c_bits(cmd);
 
@@ -1537,14 +1538,14 @@ static int das1800_ai_do_cmd(struct comedi_device * dev, struct comedi_subdevice
 	}
 	setup_dma(dev, cmd);
 	outb(control_c, dev->iobase + DAS1800_CONTROL_C);
-	// set conversion rate and length for burst mode
+	/*  set conversion rate and length for burst mode */
 	if (control_c & BMDE) {
-		// program conversion period with number of microseconds minus 1
+		/*  program conversion period with number of microseconds minus 1 */
 		outb(cmd.convert_arg / 1000 - 1,
 			dev->iobase + DAS1800_BURST_RATE);
 		outb(cmd.chanlist_len - 1, dev->iobase + DAS1800_BURST_LENGTH);
 	}
-	outb(devpriv->irq_dma_bits, dev->iobase + DAS1800_CONTROL_B);	// enable irq/dma
+	outb(devpriv->irq_dma_bits, dev->iobase + DAS1800_CONTROL_B);	/*  enable irq/dma */
 	outb(control_a, dev->iobase + DAS1800_CONTROL_A);	/* enable fifo and triggering */
 	outb(CVEN, dev->iobase + DAS1800_STATUS);	/* enable conversions */
 
@@ -1552,8 +1553,8 @@ static int das1800_ai_do_cmd(struct comedi_device * dev, struct comedi_subdevice
 }
 
 /* read analog input */
-static int das1800_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das1800_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i, n;
 	int chan, range, aref, chan_range;
@@ -1582,7 +1583,7 @@ static int das1800_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice
 	/* mask of unipolar/bipolar bit from range */
 	range = CR_RANGE(insn->chanspec) & 0x3;
 	chan_range = chan | (range << 8);
-	comedi_spin_lock_irqsave(&dev->spinlock, irq_flags);
+	spin_lock_irqsave(&dev->spinlock, irq_flags);
 	outb(QRAM, dev->iobase + DAS1800_SELECT);	/* select QRAM for baseAddress + 0x0 */
 	outb(0x0, dev->iobase + DAS1800_QRAM_ADDRESS);	/* set QRAM address start */
 	outw(chan_range, dev->iobase + DAS1800_QRAM);
@@ -1606,43 +1607,43 @@ static int das1800_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice
 			dpnt += 1 << (thisboard->resolution - 1);
 		data[n] = dpnt;
 	}
-	comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+	spin_unlock_irqrestore(&dev->spinlock, irq_flags);
 
 	return n;
 }
 
 /* writes to an analog output channel */
-static int das1800_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das1800_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int chan = CR_CHAN(insn->chanspec);
-//      int range = CR_RANGE(insn->chanspec);
+/* int range = CR_RANGE(insn->chanspec); */
 	int update_chan = thisboard->ao_n_chan - 1;
 	short output;
 	unsigned long irq_flags;
 
-	//  card expects two's complement data
+	/*   card expects two's complement data */
 	output = data[0] - (1 << (thisboard->resolution - 1));
-	// if the write is to the 'update' channel, we need to remember its value
+	/*  if the write is to the 'update' channel, we need to remember its value */
 	if (chan == update_chan)
 		devpriv->ao_update_bits = output;
-	// write to channel
-	comedi_spin_lock_irqsave(&dev->spinlock, irq_flags);
+	/*  write to channel */
+	spin_lock_irqsave(&dev->spinlock, irq_flags);
 	outb(DAC(chan), dev->iobase + DAS1800_SELECT);	/* select dac channel for baseAddress + 0x0 */
 	outw(output, dev->iobase + DAS1800_DAC);
-	// now we need to write to 'update' channel to update all dac channels
+	/*  now we need to write to 'update' channel to update all dac channels */
 	if (chan != update_chan) {
 		outb(DAC(update_chan), dev->iobase + DAS1800_SELECT);	/* select 'update' channel for baseAddress + 0x0 */
 		outw(devpriv->ao_update_bits, dev->iobase + DAS1800_DAC);
 	}
-	comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+	spin_unlock_irqrestore(&dev->spinlock, irq_flags);
 
 	return 1;
 }
 
 /* reads from digital input channels */
-static int das1800_di_rbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das1800_di_rbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 
 	data[1] = inb(dev->iobase + DAS1800_DIGITAL) & 0xf;
@@ -1652,12 +1653,12 @@ static int das1800_di_rbits(struct comedi_device * dev, struct comedi_subdevice
 }
 
 /* writes to digital output channels */
-static int das1800_do_wbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das1800_do_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int wbits;
 
-	// only set bits that have been masked
+	/*  only set bits that have been masked */
 	data[0] &= (1 << s->n_chan) - 1;
 	wbits = devpriv->do_bits;
 	wbits &= ~data[0];
@@ -1672,15 +1673,15 @@ static int das1800_do_wbits(struct comedi_device * dev, struct comedi_subdevice
 }
 
 /* loads counters with divisor1, divisor2 from private structure */
-static int das1800_set_frequency(struct comedi_device * dev)
+static int das1800_set_frequency(struct comedi_device *dev)
 {
 	int err = 0;
 
-	// counter 1, mode 2
+	/*  counter 1, mode 2 */
 	if (i8254_load(dev->iobase + DAS1800_COUNTER, 0, 1, devpriv->divisor1,
 			2))
 		err++;
-	// counter 2, mode 2
+	/*  counter 2, mode 2 */
 	if (i8254_load(dev->iobase + DAS1800_COUNTER, 0, 2, devpriv->divisor2,
 			2))
 		err++;
@@ -1697,11 +1698,11 @@ static unsigned int burst_convert_arg(unsigned int convert_arg, int round_mode)
 {
 	unsigned int micro_sec;
 
-	// in burst mode, the maximum conversion time is 64 microseconds
+	/*  in burst mode, the maximum conversion time is 64 microseconds */
 	if (convert_arg > 64000)
 		convert_arg = 64000;
 
-	// the conversion time must be an integral number of microseconds
+	/*  the conversion time must be an integral number of microseconds */
 	switch (round_mode) {
 	case TRIG_ROUND_NEAREST:
 	default:
@@ -1715,21 +1716,21 @@ static unsigned int burst_convert_arg(unsigned int convert_arg, int round_mode)
 		break;
 	}
 
-	// return number of nanoseconds
+	/*  return number of nanoseconds */
 	return micro_sec * 1000;
 }
 
-// utility function that suggests a dma transfer size based on the conversion period 'ns'
-static unsigned int suggest_transfer_size(struct comedi_cmd * cmd)
+/* utility function that suggests a dma transfer size based on the conversion period 'ns' */
+static unsigned int suggest_transfer_size(struct comedi_cmd *cmd)
 {
 	unsigned int size = DMA_BUF_SIZE;
-	static const int sample_size = 2;	// size in bytes of one sample from board
-	unsigned int fill_time = 300000000;	// target time in nanoseconds for filling dma buffer
-	unsigned int max_size;	// maximum size we will allow for a transfer
+	static const int sample_size = 2;	/*  size in bytes of one sample from board */
+	unsigned int fill_time = 300000000;	/*  target time in nanoseconds for filling dma buffer */
+	unsigned int max_size;	/*  maximum size we will allow for a transfer */
 
-	// make dma buffer fill in 0.3 seconds for timed modes
+	/*  make dma buffer fill in 0.3 seconds for timed modes */
 	switch (cmd->scan_begin_src) {
-	case TRIG_FOLLOW:	// not in burst mode
+	case TRIG_FOLLOW:	/*  not in burst mode */
 		if (cmd->convert_src == TRIG_TIMER)
 			size = (fill_time / cmd->convert_arg) * sample_size;
 		break;
@@ -1742,9 +1743,9 @@ static unsigned int suggest_transfer_size(struct comedi_cmd * cmd)
 		break;
 	}
 
-	// set a minimum and maximum size allowed
+	/*  set a minimum and maximum size allowed */
 	max_size = DMA_BUF_SIZE;
-	// if we are taking limited number of conversions, limit transfer size to that
+	/*  if we are taking limited number of conversions, limit transfer size to that */
 	if (cmd->stop_src == TRIG_COUNT &&
 		cmd->stop_arg * cmd->chanlist_len * sample_size < max_size)
 		max_size = cmd->stop_arg * cmd->chanlist_len * sample_size;
diff --git a/drivers/staging/comedi/drivers/das6402.c b/drivers/staging/comedi/drivers/das6402.c
index 2a8ca052510..0114eb93530 100644
--- a/drivers/staging/comedi/drivers/das6402.c
+++ b/drivers/staging/comedi/drivers/das6402.c
@@ -38,6 +38,7 @@ Devices: [Keithley Metrabyte] DAS6402 (das6402)
 This driver has suffered bitrot.
 */
 
+#include <linux/interrupt.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
@@ -98,13 +99,13 @@ This driver has suffered bitrot.
 #define	C2 0x80
 #define	RWLH 0x30
 
-static int das6402_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int das6402_detach(struct comedi_device * dev);
+static int das6402_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int das6402_detach(struct comedi_device *dev);
 static struct comedi_driver driver_das6402 = {
-      driver_name:"das6402",
-      module:THIS_MODULE,
-      attach:das6402_attach,
-      detach:das6402_detach,
+	.driver_name = "das6402",
+	.module = THIS_MODULE,
+	.attach = das6402_attach,
+	.detach = das6402_detach,
 };
 
 COMEDI_INITCLEANUP(driver_das6402);
@@ -116,9 +117,9 @@ struct das6402_private {
 };
 #define devpriv ((struct das6402_private *)dev->private)
 
-static void das6402_ai_fifo_dregs(struct comedi_device * dev, struct comedi_subdevice * s);
+static void das6402_ai_fifo_dregs(struct comedi_device *dev, struct comedi_subdevice *s);
 
-static void das6402_setcounter(struct comedi_device * dev)
+static void das6402_setcounter(struct comedi_device *dev)
 {
 	BYTE p;
 	unsigned short ctrlwrd;
@@ -151,7 +152,7 @@ static void das6402_setcounter(struct comedi_device * dev)
 	outb_p(p, dev->iobase + 14);
 }
 
-static irqreturn_t intr_handler(int irq, void *d PT_REGS_ARG)
+static irqreturn_t intr_handler(int irq, void *d)
 {
 	struct comedi_device *dev = d;
 	struct comedi_subdevice *s = dev->subdevices;
@@ -186,7 +187,7 @@ static irqreturn_t intr_handler(int irq, void *d PT_REGS_ARG)
 }
 
 #if 0
-static void das6402_ai_fifo_read(struct comedi_device * dev, short * data, int n)
+static void das6402_ai_fifo_read(struct comedi_device *dev, short *data, int n)
 {
 	int i;
 
@@ -195,7 +196,7 @@ static void das6402_ai_fifo_read(struct comedi_device * dev, short * data, int n
 }
 #endif
 
-static void das6402_ai_fifo_dregs(struct comedi_device * dev, struct comedi_subdevice * s)
+static void das6402_ai_fifo_dregs(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	while (1) {
 		if (!(inb(dev->iobase + 8) & 0x01))
@@ -204,7 +205,7 @@ static void das6402_ai_fifo_dregs(struct comedi_device * dev, struct comedi_subd
 	}
 }
 
-static int das6402_ai_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int das6402_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	/*
 	 *  This function should reset the board from whatever condition it
@@ -226,8 +227,8 @@ static int das6402_ai_cancel(struct comedi_device * dev, struct comedi_subdevice
 }
 
 #ifdef unused
-static int das6402_ai_mode2(struct comedi_device * dev, struct comedi_subdevice * s,
-	comedi_trig * it)
+static int das6402_ai_mode2(struct comedi_device *dev, struct comedi_subdevice *s,
+	comedi_trig *it)
 {
 	devpriv->das6402_ignoreirq = 1;
 
@@ -249,7 +250,7 @@ static int das6402_ai_mode2(struct comedi_device * dev, struct comedi_subdevice
 }
 #endif
 
-static int board_init(struct comedi_device * dev)
+static int board_init(struct comedi_device *dev)
 {
 	BYTE b;
 
@@ -289,17 +290,17 @@ static int board_init(struct comedi_device * dev)
 	return 0;
 }
 
-static int das6402_detach(struct comedi_device * dev)
+static int das6402_detach(struct comedi_device *dev)
 {
 	if (dev->irq)
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 	if (dev->iobase)
 		release_region(dev->iobase, DAS6402_SIZE);
 
 	return 0;
 }
 
-static int das6402_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int das6402_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	unsigned int irq;
 	unsigned long iobase;
@@ -324,17 +325,19 @@ static int das6402_attach(struct comedi_device * dev, struct comedi_devconfig *
 
 	irq = it->options[0];
 	printk(" ( irq = %u )", irq);
-	ret = comedi_request_irq(irq, intr_handler, 0, "das6402", dev);
+	ret = request_irq(irq, intr_handler, 0, "das6402", dev);
 	if (ret < 0) {
 		printk("irq conflict\n");
 		return ret;
 	}
 	dev->irq = irq;
 
-	if ((ret = alloc_private(dev, sizeof(struct das6402_private))) < 0)
+	ret = alloc_private(dev, sizeof(struct das6402_private));
+	if (ret < 0)
 		return ret;
 
-	if ((ret = alloc_subdevices(dev, 1)) < 0)
+	ret = alloc_subdevices(dev, 1);
+	if (ret < 0)
 		return ret;
 
 	/* ai subdevice */
@@ -342,7 +345,7 @@ static int das6402_attach(struct comedi_device * dev, struct comedi_devconfig *
 	s->type = COMEDI_SUBD_AI;
 	s->subdev_flags = SDF_READABLE | SDF_GROUND;
 	s->n_chan = 8;
-	//s->trig[2]=das6402_ai_mode2;
+	/* s->trig[2]=das6402_ai_mode2; */
 	s->cancel = das6402_ai_cancel;
 	s->maxdata = (1 << 12) - 1;
 	s->len_chanlist = 16;	/* ? */
diff --git a/drivers/staging/comedi/drivers/das800.c b/drivers/staging/comedi/drivers/das800.c
index 7a6656bf809..70e9d699c7a 100644
--- a/drivers/staging/comedi/drivers/das800.c
+++ b/drivers/staging/comedi/drivers/das800.c
@@ -62,6 +62,7 @@ cmd triggers supported:
 
 */
 
+#include <linux/interrupt.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
@@ -72,7 +73,7 @@ cmd triggers supported:
 
 #define DAS800_SIZE           8
 #define TIMER_BASE            1000
-#define N_CHAN_AI             8	// number of analog input channels
+#define N_CHAN_AI             8	/*  number of analog input channels */
 
 /* Registers for the das800 */
 
@@ -94,8 +95,8 @@ cmd triggers supported:
 #define   IRQ                   0x8
 #define   BUSY                  0x80
 #define DAS800_GAIN           3
-#define   CIO_FFOV              0x8	// fifo overflow for cio-das802/16
-#define   CIO_ENHF              0x90	// interrupt fifo half full for cio-das802/16
+#define   CIO_FFOV              0x8	/*  fifo overflow for cio-das802/16 */
+#define   CIO_ENHF              0x90	/*  interrupt fifo half full for cio-das802/16 */
 #define   CONTROL1              0x80
 #define   CONV_CONTROL          0xa0
 #define   SCAN_LIMITS           0xc0
@@ -113,7 +114,7 @@ struct das800_board {
 	int resolution;
 };
 
-//analog input ranges
+/* analog input ranges */
 static const struct comedi_lrange range_das800_ai = {
 	1,
 	{
@@ -184,46 +185,46 @@ enum { das800, ciodas800, das801, ciodas801, das802, ciodas802, ciodas80216 };
 
 static const struct das800_board das800_boards[] = {
 	{
-	      name:	"das-800",
-	      ai_speed:25000,
-	      ai_range:&range_das800_ai,
-	      resolution:12,
+	.name = "das-800",
+	.ai_speed = 25000,
+	.ai_range = &range_das800_ai,
+	.resolution = 12,
 		},
 	{
-	      name:	"cio-das800",
-	      ai_speed:20000,
-	      ai_range:&range_das800_ai,
-	      resolution:12,
+	.name = "cio-das800",
+	.ai_speed = 20000,
+	.ai_range = &range_das800_ai,
+	.resolution = 12,
 		},
 	{
-	      name:	"das-801",
-	      ai_speed:25000,
-	      ai_range:&range_das801_ai,
-	      resolution:12,
+	.name = "das-801",
+	.ai_speed = 25000,
+	.ai_range = &range_das801_ai,
+	.resolution = 12,
 		},
 	{
-	      name:	"cio-das801",
-	      ai_speed:20000,
-	      ai_range:&range_cio_das801_ai,
-	      resolution:12,
+	.name = "cio-das801",
+	.ai_speed = 20000,
+	.ai_range = &range_cio_das801_ai,
+	.resolution = 12,
 		},
 	{
-	      name:	"das-802",
-	      ai_speed:25000,
-	      ai_range:&range_das802_ai,
-	      resolution:12,
+	.name = "das-802",
+	.ai_speed = 25000,
+	.ai_range = &range_das802_ai,
+	.resolution = 12,
 		},
 	{
-	      name:	"cio-das802",
-	      ai_speed:20000,
-	      ai_range:&range_das802_ai,
-	      resolution:12,
+	.name = "cio-das802",
+	.ai_speed = 20000,
+	.ai_range = &range_das802_ai,
+	.resolution = 12,
 		},
 	{
-	      name:	"cio-das802/16",
-	      ai_speed:10000,
-	      ai_range:&range_das80216_ai,
-	      resolution:16,
+	.name = "cio-das802/16",
+	.ai_speed = 10000,
+	.ai_range = &range_das80216_ai,
+	.resolution = 16,
 		},
 };
 
@@ -242,47 +243,47 @@ struct das800_private {
 
 #define devpriv ((struct das800_private *)dev->private)
 
-static int das800_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int das800_detach(struct comedi_device * dev);
-static int das800_cancel(struct comedi_device * dev, struct comedi_subdevice * s);
+static int das800_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int das800_detach(struct comedi_device *dev);
+static int das800_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
 
 static struct comedi_driver driver_das800 = {
-      driver_name:"das800",
-      module:THIS_MODULE,
-      attach:das800_attach,
-      detach:das800_detach,
-      num_names:sizeof(das800_boards) / sizeof(struct das800_board),
-      board_name:&das800_boards[0].name,
-      offset:sizeof(struct das800_board),
+	.driver_name = "das800",
+	.module = THIS_MODULE,
+	.attach = das800_attach,
+	.detach = das800_detach,
+	.num_names = ARRAY_SIZE(das800_boards),
+	.board_name = &das800_boards[0].name,
+	.offset = sizeof(struct das800_board),
 };
 
-static irqreturn_t das800_interrupt(int irq, void *d PT_REGS_ARG);
-static void enable_das800(struct comedi_device * dev);
-static void disable_das800(struct comedi_device * dev);
-static int das800_ai_do_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd);
-static int das800_ai_do_cmd(struct comedi_device * dev, struct comedi_subdevice * s);
-static int das800_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int das800_di_rbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int das800_do_wbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int das800_probe(struct comedi_device * dev);
-static int das800_set_frequency(struct comedi_device * dev);
+static irqreturn_t das800_interrupt(int irq, void *d);
+static void enable_das800(struct comedi_device *dev);
+static void disable_das800(struct comedi_device *dev);
+static int das800_ai_do_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd);
+static int das800_ai_do_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
+static int das800_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int das800_di_rbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int das800_do_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int das800_probe(struct comedi_device *dev);
+static int das800_set_frequency(struct comedi_device *dev);
 
 /* checks and probes das-800 series board type */
-static int das800_probe(struct comedi_device * dev)
+static int das800_probe(struct comedi_device *dev)
 {
 	int id_bits;
 	unsigned long irq_flags;
 	int board;
 
-	// 'comedi spin lock irqsave' disables even rt interrupts, we use them to protect indirect addressing
-	comedi_spin_lock_irqsave(&dev->spinlock, irq_flags);
+	/*  'comedi spin lock irqsave' disables even rt interrupts, we use them to protect indirect addressing */
+	spin_lock_irqsave(&dev->spinlock, irq_flags);
 	outb(ID, dev->iobase + DAS800_GAIN);	/* select base address + 7 to be ID register */
 	id_bits = inb(dev->iobase + DAS800_ID) & 0x3;	/* get id bits */
-	comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+	spin_unlock_irqrestore(&dev->spinlock, irq_flags);
 
 	board = thisboard - das800_boards;
 
@@ -343,7 +344,7 @@ static int das800_probe(struct comedi_device * dev)
 COMEDI_INITCLEANUP(driver_das800);
 
 /* interrupt service routine */
-static irqreturn_t das800_interrupt(int irq, void *d PT_REGS_ARG)
+static irqreturn_t das800_interrupt(int irq, void *d)
 {
 	short i;		/* loop index */
 	short dataPoint = 0;
@@ -352,8 +353,8 @@ static irqreturn_t das800_interrupt(int irq, void *d PT_REGS_ARG)
 	struct comedi_async *async;
 	int status;
 	unsigned long irq_flags;
-	static const int max_loops = 128;	// half-fifo size for cio-das802/16
-	// flags
+	static const int max_loops = 128;	/*  half-fifo size for cio-das802/16 */
+	/*  flags */
 	int fifo_empty = 0;
 	int fifo_overflow = 0;
 
@@ -369,13 +370,13 @@ static irqreturn_t das800_interrupt(int irq, void *d PT_REGS_ARG)
 	 */
 	async = s->async;
 
-	// if hardware conversions are not enabled, then quit
-	comedi_spin_lock_irqsave(&dev->spinlock, irq_flags);
+	/*  if hardware conversions are not enabled, then quit */
+	spin_lock_irqsave(&dev->spinlock, irq_flags);
 	outb(CONTROL1, dev->iobase + DAS800_GAIN);	/* select base address + 7 to be STATUS2 register */
 	status = inb(dev->iobase + DAS800_STATUS2) & STATUS2_HCEN;
 	/* don't release spinlock yet since we want to make sure noone else disables hardware conversions */
 	if (status == 0) {
-		comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+		spin_unlock_irqrestore(&dev->spinlock, irq_flags);
 		return IRQ_HANDLED;
 	}
 
@@ -390,7 +391,7 @@ static irqreturn_t das800_interrupt(int irq, void *d PT_REGS_ARG)
 			if (fifo_overflow)
 				break;
 		} else {
-			fifo_empty = 0;	// cio-das802/16 has no fifo empty status bit
+			fifo_empty = 0;	/*  cio-das802/16 has no fifo empty status bit */
 		}
 		if (fifo_empty) {
 			break;
@@ -410,12 +411,12 @@ static irqreturn_t das800_interrupt(int irq, void *d PT_REGS_ARG)
 	/* check for fifo overflow */
 	if (thisboard->resolution == 12) {
 		fifo_overflow = dataPoint & FIFO_OVF;
-		// else cio-das802/16
+		/*  else cio-das802/16 */
 	} else {
 		fifo_overflow = inb(dev->iobase + DAS800_GAIN) & CIO_FFOV;
 	}
 	if (fifo_overflow) {
-		comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+		spin_unlock_irqrestore(&dev->spinlock, irq_flags);
 		comedi_error(dev, "DAS800 FIFO overflow");
 		das800_cancel(dev, dev->subdevices + 0);
 		async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA;
@@ -429,10 +430,10 @@ static irqreturn_t das800_interrupt(int irq, void *d PT_REGS_ARG)
 		outb(CONTROL1, dev->iobase + DAS800_GAIN);	/* select dev->iobase + 2 to be control register 1 */
 		outb(CONTROL1_INTE | devpriv->do_bits,
 			dev->iobase + DAS800_CONTROL1);
-		comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+		spin_unlock_irqrestore(&dev->spinlock, irq_flags);
 		/* otherwise, stop taking data */
 	} else {
-		comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+		spin_unlock_irqrestore(&dev->spinlock, irq_flags);
 		disable_das800(dev);	/* diable hardware triggered conversions */
 		async->events |= COMEDI_CB_EOA;
 	}
@@ -441,7 +442,7 @@ static irqreturn_t das800_interrupt(int irq, void *d PT_REGS_ARG)
 	return IRQ_HANDLED;
 }
 
-static int das800_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int das800_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	unsigned long iobase = it->options[0];
@@ -484,7 +485,7 @@ static int das800_attach(struct comedi_device * dev, struct comedi_devconfig * i
 		return -EINVAL;
 	}
 	if (irq) {
-		if (comedi_request_irq(irq, das800_interrupt, 0, "das800", dev)) {
+		if (request_irq(irq, das800_interrupt, 0, "das800", dev)) {
 			printk("unable to allocate irq %u\n", irq);
 			return -EINVAL;
 		}
@@ -531,15 +532,15 @@ static int das800_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	disable_das800(dev);
 
 	/* initialize digital out channels */
-	comedi_spin_lock_irqsave(&dev->spinlock, irq_flags);
+	spin_lock_irqsave(&dev->spinlock, irq_flags);
 	outb(CONTROL1, dev->iobase + DAS800_GAIN);	/* select dev->iobase + 2 to be control register 1 */
 	outb(CONTROL1_INTE | devpriv->do_bits, dev->iobase + DAS800_CONTROL1);
-	comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+	spin_unlock_irqrestore(&dev->spinlock, irq_flags);
 
 	return 0;
 };
 
-static int das800_detach(struct comedi_device * dev)
+static int das800_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: das800: remove\n", dev->minor);
 
@@ -547,11 +548,11 @@ static int das800_detach(struct comedi_device * dev)
 	if (dev->iobase)
 		release_region(dev->iobase, DAS800_SIZE);
 	if (dev->irq)
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 	return 0;
 };
 
-static int das800_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int das800_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	devpriv->forever = 0;
 	devpriv->count = 0;
@@ -560,32 +561,32 @@ static int das800_cancel(struct comedi_device * dev, struct comedi_subdevice * s
 }
 
 /* enable_das800 makes the card start taking hardware triggered conversions */
-static void enable_das800(struct comedi_device * dev)
+static void enable_das800(struct comedi_device *dev)
 {
 	unsigned long irq_flags;
-	comedi_spin_lock_irqsave(&dev->spinlock, irq_flags);
-	// enable fifo-half full interrupts for cio-das802/16
+	spin_lock_irqsave(&dev->spinlock, irq_flags);
+	/*  enable fifo-half full interrupts for cio-das802/16 */
 	if (thisboard->resolution == 16)
 		outb(CIO_ENHF, dev->iobase + DAS800_GAIN);
 	outb(CONV_CONTROL, dev->iobase + DAS800_GAIN);	/* select dev->iobase + 2 to be conversion control register */
 	outb(CONV_HCEN, dev->iobase + DAS800_CONV_CONTROL);	/* enable hardware triggering */
 	outb(CONTROL1, dev->iobase + DAS800_GAIN);	/* select dev->iobase + 2 to be control register 1 */
 	outb(CONTROL1_INTE | devpriv->do_bits, dev->iobase + DAS800_CONTROL1);	/* enable card's interrupt */
-	comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+	spin_unlock_irqrestore(&dev->spinlock, irq_flags);
 }
 
 /* disable_das800 stops hardware triggered conversions */
-static void disable_das800(struct comedi_device * dev)
+static void disable_das800(struct comedi_device *dev)
 {
 	unsigned long irq_flags;
-	comedi_spin_lock_irqsave(&dev->spinlock, irq_flags);
+	spin_lock_irqsave(&dev->spinlock, irq_flags);
 	outb(CONV_CONTROL, dev->iobase + DAS800_GAIN);	/* select dev->iobase + 2 to be conversion control register */
 	outb(0x0, dev->iobase + DAS800_CONV_CONTROL);	/* disable hardware triggering of conversions */
-	comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+	spin_unlock_irqrestore(&dev->spinlock, irq_flags);
 }
 
-static int das800_ai_do_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int das800_ai_do_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	int tmp;
@@ -684,7 +685,7 @@ static int das800_ai_do_cmdtest(struct comedi_device * dev, struct comedi_subdev
 	if (err)
 		return 4;
 
-	// check channel/gain list against card's limitations
+	/*  check channel/gain list against card's limitations */
 	if (cmd->chanlist) {
 		gain = CR_RANGE(cmd->chanlist[0]);
 		startChan = CR_CHAN(cmd->chanlist[0]);
@@ -709,7 +710,7 @@ static int das800_ai_do_cmdtest(struct comedi_device * dev, struct comedi_subdev
 	return 0;
 }
 
-static int das800_ai_do_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int das800_ai_do_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	int startChan, endChan, scan, gain;
 	int conv_bits;
@@ -729,10 +730,10 @@ static int das800_ai_do_cmd(struct comedi_device * dev, struct comedi_subdevice
 	endChan = (startChan + async->cmd.chanlist_len - 1) % 8;
 	scan = (endChan << 3) | startChan;
 
-	comedi_spin_lock_irqsave(&dev->spinlock, irq_flags);
+	spin_lock_irqsave(&dev->spinlock, irq_flags);
 	outb(SCAN_LIMITS, dev->iobase + DAS800_GAIN);	/* select base address + 2 to be scan limits register */
 	outb(scan, dev->iobase + DAS800_SCAN_LIMITS);	/* set scan limits */
-	comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+	spin_unlock_irqrestore(&dev->spinlock, irq_flags);
 
 	/* set gain */
 	gain = CR_RANGE(async->cmd.chanlist[0]);
@@ -779,17 +780,17 @@ static int das800_ai_do_cmd(struct comedi_device * dev, struct comedi_subdevice
 		break;
 	}
 
-	comedi_spin_lock_irqsave(&dev->spinlock, irq_flags);
+	spin_lock_irqsave(&dev->spinlock, irq_flags);
 	outb(CONV_CONTROL, dev->iobase + DAS800_GAIN);	/* select dev->iobase + 2 to be conversion control register */
 	outb(conv_bits, dev->iobase + DAS800_CONV_CONTROL);
-	comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+	spin_unlock_irqrestore(&dev->spinlock, irq_flags);
 	async->events = 0;
 	enable_das800(dev);
 	return 0;
 }
 
-static int das800_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das800_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i, n;
 	int chan;
@@ -803,10 +804,10 @@ static int das800_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice *
 	/* set multiplexer */
 	chan = CR_CHAN(insn->chanspec);
 
-	comedi_spin_lock_irqsave(&dev->spinlock, irq_flags);
+	spin_lock_irqsave(&dev->spinlock, irq_flags);
 	outb(CONTROL1, dev->iobase + DAS800_GAIN);	/* select dev->iobase + 2 to be control register 1 */
 	outb(chan | devpriv->do_bits, dev->iobase + DAS800_CONTROL1);
-	comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+	spin_unlock_irqrestore(&dev->spinlock, irq_flags);
 
 	/* set gain / range */
 	range = CR_RANGE(insn->chanspec);
@@ -815,7 +816,7 @@ static int das800_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice *
 	range &= 0xf;
 	outb(range, dev->iobase + DAS800_GAIN);
 
-	comedi_udelay(5);
+	udelay(5);
 
 	for (n = 0; n < insn->n; n++) {
 		/* trigger conversion */
@@ -842,8 +843,8 @@ static int das800_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice *
 	return n;
 }
 
-static int das800_di_rbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das800_di_rbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int bits;
 
@@ -855,23 +856,23 @@ static int das800_di_rbits(struct comedi_device * dev, struct comedi_subdevice *
 	return 2;
 }
 
-static int das800_do_wbits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int das800_do_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int wbits;
 	unsigned long irq_flags;
 
-	// only set bits that have been masked
+	/*  only set bits that have been masked */
 	data[0] &= 0xf;
 	wbits = devpriv->do_bits >> 4;
 	wbits &= ~data[0];
 	wbits |= data[0] & data[1];
 	devpriv->do_bits = wbits << 4;
 
-	comedi_spin_lock_irqsave(&dev->spinlock, irq_flags);
+	spin_lock_irqsave(&dev->spinlock, irq_flags);
 	outb(CONTROL1, dev->iobase + DAS800_GAIN);	/* select dev->iobase + 2 to be control register 1 */
 	outb(devpriv->do_bits | CONTROL1_INTE, dev->iobase + DAS800_CONTROL1);
-	comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+	spin_unlock_irqrestore(&dev->spinlock, irq_flags);
 
 	data[1] = wbits;
 
@@ -879,7 +880,7 @@ static int das800_do_wbits(struct comedi_device * dev, struct comedi_subdevice *
 }
 
 /* loads counters with divisor1, divisor2 from private structure */
-static int das800_set_frequency(struct comedi_device * dev)
+static int das800_set_frequency(struct comedi_device *dev)
 {
 	int err = 0;
 
diff --git a/drivers/staging/comedi/drivers/dmm32at.c b/drivers/staging/comedi/drivers/dmm32at.c
index 829083651ed..573cbe72b20 100644
--- a/drivers/staging/comedi/drivers/dmm32at.c
+++ b/drivers/staging/comedi/drivers/dmm32at.c
@@ -74,6 +74,7 @@ Configuration Options:
  * options that are used with comedi_config.
  */
 
+#include <linux/interrupt.h>
 #include "../comedidev.h"
 #include <linux/ioport.h>
 
@@ -114,8 +115,8 @@ Configuration Options:
 #define DMM32AT_DIOC 0x0e
 #define DMM32AT_DIOCONF 0x0f
 
-#define dmm_inb(cdev,reg) inb((cdev->iobase)+reg)
-#define dmm_outb(cdev,reg,valu) outb(valu,(cdev->iobase)+reg)
+#define dmm_inb(cdev, reg) inb((cdev->iobase)+reg)
+#define dmm_outb(cdev, reg, valu) outb(valu, (cdev->iobase)+reg)
 
 /* Board register values. */
 
@@ -213,15 +214,15 @@ struct dmm32at_board {
 };
 static const struct dmm32at_board dmm32at_boards[] = {
 	{
-	      name:	"dmm32at",
-	      ai_chans:32,
-	      ai_bits:	16,
-	      ai_ranges:&dmm32at_airanges,
-	      ao_chans:4,
-	      ao_bits:	12,
-	      ao_ranges:&dmm32at_aoranges,
-	      have_dio:1,
-	      dio_chans:24,
+	.name = "dmm32at",
+	.ai_chans = 32,
+	.ai_bits = 16,
+	.ai_ranges = &dmm32at_airanges,
+	.ao_chans = 4,
+	.ao_bits = 12,
+	.ao_ranges = &dmm32at_aoranges,
+	.have_dio = 1,
+	.dio_chans = 24,
 		},
 };
 
@@ -258,13 +259,13 @@ struct dmm32at_private {
  * the board, and also about the kernel module that contains
  * the device code.
  */
-static int dmm32at_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int dmm32at_detach(struct comedi_device * dev);
+static int dmm32at_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int dmm32at_detach(struct comedi_device *dev);
 static struct comedi_driver driver_dmm32at = {
-      driver_name:"dmm32at",
-      module:THIS_MODULE,
-      attach:dmm32at_attach,
-      detach:dmm32at_detach,
+	.driver_name = "dmm32at",
+	.module = THIS_MODULE,
+	.attach = dmm32at_attach,
+	.detach = dmm32at_detach,
 /* It is not necessary to implement the following members if you are
  * writing a driver for a ISA PnP or PCI card */
 /* Most drivers will support multiple types of boards by
@@ -283,29 +284,29 @@ static struct comedi_driver driver_dmm32at = {
  * the type of board in software.  ISA PnP, PCI, and PCMCIA
  * devices are such boards.
  */
-      board_name:&dmm32at_boards[0].name,
-      offset:sizeof(struct dmm32at_board),
-      num_names:sizeof(dmm32at_boards) / sizeof(struct dmm32at_board),
+	.board_name = &dmm32at_boards[0].name,
+	.offset = sizeof(struct dmm32at_board),
+	.num_names = ARRAY_SIZE(dmm32at_boards),
 };
 
 /* prototypes for driver functions below */
-static int dmm32at_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int dmm32at_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int dmm32at_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int dmm32at_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int dmm32at_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int dmm32at_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd);
-static int dmm32at_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s);
-static int dmm32at_ai_cancel(struct comedi_device * dev, struct comedi_subdevice * s);
+static int dmm32at_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int dmm32at_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int dmm32at_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int dmm32at_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int dmm32at_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int dmm32at_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd);
+static int dmm32at_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
+static int dmm32at_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
 static int dmm32at_ns_to_timer(unsigned int *ns, int round);
-static irqreturn_t dmm32at_isr(int irq, void *d PT_REGS_ARG);
-void dmm32at_setaitimer(struct comedi_device * dev, unsigned int nansec);
+static irqreturn_t dmm32at_isr(int irq, void *d);
+void dmm32at_setaitimer(struct comedi_device *dev, unsigned int nansec);
 
 /*
  * Attach is called by the Comedi core to configure the driver
@@ -313,7 +314,7 @@ void dmm32at_setaitimer(struct comedi_device * dev, unsigned int nansec);
  * in the driver structure, dev->board_ptr contains that
  * address.
  */
-static int dmm32at_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int dmm32at_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int ret;
 	struct comedi_subdevice *s;
@@ -380,8 +381,7 @@ static int dmm32at_attach(struct comedi_device * dev, struct comedi_devconfig *
 
 	/* board is there, register interrupt */
 	if (irq) {
-		ret = comedi_request_irq(irq, dmm32at_isr, 0, thisboard->name,
-			dev);
+		ret = request_irq(irq, dmm32at_isr, 0, thisboard->name, dev);
 		if (ret < 0) {
 			printk("irq conflict\n");
 			return ret;
@@ -394,7 +394,7 @@ static int dmm32at_attach(struct comedi_device * dev, struct comedi_devconfig *
  * it is, this is the place to do it.  Otherwise, dev->board_ptr
  * should already be initialized.
  */
-	//dev->board_ptr = dmm32at_probe(dev);
+	/* dev->board_ptr = dmm32at_probe(dev); */
 
 /*
  * Initialize dev->board_name.  Note that we can use the "thisboard"
@@ -481,11 +481,11 @@ static int dmm32at_attach(struct comedi_device * dev, struct comedi_devconfig *
  * allocated by _attach().  dev->private and dev->subdevices are
  * deallocated automatically by the core.
  */
-static int dmm32at_detach(struct comedi_device * dev)
+static int dmm32at_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: dmm32at: remove\n", dev->minor);
 	if (dev->irq)
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 	if (dev->iobase)
 		release_region(dev->iobase, DMM32AT_MEMSIZE);
 
@@ -497,8 +497,8 @@ static int dmm32at_detach(struct comedi_device * dev)
  * mode.
  */
 
-static int dmm32at_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dmm32at_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n, i;
 	unsigned int d;
@@ -512,7 +512,7 @@ static int dmm32at_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice
 	chan = CR_CHAN(insn->chanspec) & (s->n_chan - 1);
 	range = CR_RANGE(insn->chanspec);
 
-	//printk("channel=0x%02x, range=%d\n",chan,range);
+	/* printk("channel=0x%02x, range=%d\n",chan,range); */
 
 	/* zero scan and fifo control and reset fifo */
 	dmm_outb(dev, DMM32AT_FIFOCNTRL, DMM32AT_FIFORESET);
@@ -568,14 +568,14 @@ static int dmm32at_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice
 	return n;
 }
 
-static int dmm32at_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int dmm32at_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	int tmp;
 	int start_chan, gain, i;
 
-	//printk("dmmat32 in command test\n");
+	/* printk("dmmat32 in command test\n"); */
 
 	/* cmdtest tests a particular command to see if it is valid.
 	 * Using the cmdtest ioctl, a user can create a valid cmd
@@ -752,7 +752,7 @@ static int dmm32at_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevic
 	return 0;
 }
 
-static int dmm32at_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int dmm32at_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct comedi_cmd *cmd = &s->async->cmd;
 	int i, range;
@@ -822,13 +822,13 @@ static int dmm32at_ai_cmd(struct comedi_device * dev, struct comedi_subdevice *
 
 }
 
-static int dmm32at_ai_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int dmm32at_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	devpriv->ai_scans_left = 1;
 	return 0;
 }
 
-static irqreturn_t dmm32at_isr(int irq, void *d PT_REGS_ARG)
+static irqreturn_t dmm32at_isr(int irq, void *d)
 {
 	unsigned char intstat;
 	unsigned int samp;
@@ -893,8 +893,8 @@ static int dmm32at_ns_to_timer(unsigned int *ns, int round)
 	return *ns;
 }
 
-static int dmm32at_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dmm32at_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
@@ -910,7 +910,7 @@ static int dmm32at_ao_winsn(struct comedi_device * dev, struct comedi_subdevice
 		lo = data[i] & 0x00ff;
 		/* high byte also contains channel number */
 		hi = (data[i] >> 8) + chan * (1 << 6);
-		//printk("writing 0x%02x  0x%02x\n",hi,lo);
+		/* printk("writing 0x%02x  0x%02x\n",hi,lo); */
 		/* write the low and high values to the board */
 		dmm_outb(dev, DMM32AT_DACLSB, lo);
 		dmm_outb(dev, DMM32AT_DACMSB, hi);
@@ -936,8 +936,8 @@ static int dmm32at_ao_winsn(struct comedi_device * dev, struct comedi_subdevice
 
 /* AO subdevices should have a read insn as well as a write insn.
  * Usually this means copying a value stored in devpriv. */
-static int dmm32at_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dmm32at_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
@@ -953,8 +953,8 @@ static int dmm32at_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice
  * useful to applications if you implement the insn_bits interface.
  * This allows packed reading/writing of the DIO channels.  The
  * comedi core can convert between insn_bits and insn_read/write */
-static int dmm32at_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dmm32at_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned char diobits;
 
@@ -967,7 +967,7 @@ static int dmm32at_dio_insn_bits(struct comedi_device * dev, struct comedi_subde
 		s->state &= ~data[0];
 		s->state |= data[0] & data[1];
 		/* Write out the new digital output lines */
-		//outw(s->state,dev->iobase + DMM32AT_DIO);
+		/* outw(s->state,dev->iobase + DMM32AT_DIO); */
 	}
 
 	/* get access to the DIO regs */
@@ -998,16 +998,16 @@ static int dmm32at_dio_insn_bits(struct comedi_device * dev, struct comedi_subde
 
 	/* on return, data[1] contains the value of the digital
 	 * input and output lines. */
-	//data[1]=inw(dev->iobase + DMM32AT_DIO);
+	/* data[1]=inw(dev->iobase + DMM32AT_DIO); */
 	/* or we could just return the software copy of the output values if
 	 * it was a purely digital output subdevice */
-	//data[1]=s->state;
+	/* data[1]=s->state; */
 
 	return 2;
 }
 
-static int dmm32at_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dmm32at_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned char chanbit;
 	int chan = CR_CHAN(insn->chanspec);
@@ -1043,7 +1043,7 @@ static int dmm32at_dio_insn_config(struct comedi_device * dev, struct comedi_sub
 	return 1;
 }
 
-void dmm32at_setaitimer(struct comedi_device * dev, unsigned int nansec)
+void dmm32at_setaitimer(struct comedi_device *dev, unsigned int nansec)
 {
 	unsigned char lo1, lo2, hi2;
 	unsigned short both2;
diff --git a/drivers/staging/comedi/drivers/dt2801.c b/drivers/staging/comedi/drivers/dt2801.c
index 5e0eed835d1..25a9b213b6f 100644
--- a/drivers/staging/comedi/drivers/dt2801.c
+++ b/drivers/staging/comedi/drivers/dt2801.c
@@ -88,19 +88,19 @@ Configuration options:
 #define DT2801_STATUS		1
 #define DT2801_CMD		1
 
-static int dt2801_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int dt2801_detach(struct comedi_device * dev);
+static int dt2801_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int dt2801_detach(struct comedi_device *dev);
 static struct comedi_driver driver_dt2801 = {
-      driver_name:"dt2801",
-      module:THIS_MODULE,
-      attach:dt2801_attach,
-      detach:dt2801_detach,
+	.driver_name = "dt2801",
+	.module = THIS_MODULE,
+	.attach = dt2801_attach,
+	.detach = dt2801_detach,
 };
 
 COMEDI_INITCLEANUP(driver_dt2801);
 
 #if 0
-// ignore 'defined but not used' warning
+/* ignore 'defined but not used' warning */
 static const struct comedi_lrange range_dt2801_ai_pgh_bipolar = { 4, {
 			RANGE(-10, 10),
 			RANGE(-5, 5),
@@ -118,7 +118,7 @@ static const struct comedi_lrange range_dt2801_ai_pgl_bipolar = { 4, {
 };
 
 #if 0
-// ignore 'defined but not used' warning
+/* ignore 'defined but not used' warning */
 static const struct comedi_lrange range_dt2801_ai_pgh_unipolar = { 4, {
 			RANGE(0, 10),
 			RANGE(0, 5),
@@ -152,72 +152,71 @@ struct dt2801_board {
    */
 static const struct dt2801_board boardtypes[] = {
 	{
-	      name:	"dt2801",
-	      boardcode:0x09,
-	      ad_diff:	2,
-	      ad_chan:	16,
-	      adbits:	12,
-	      adrangetype:0,
-      dabits:	12},
+	.name = "dt2801",
+	.boardcode = 0x09,
+	.ad_diff = 2,
+	.ad_chan = 16,
+	.adbits = 12,
+	.adrangetype = 0,
+	.dabits = 12},
 	{
-	      name:	"dt2801-a",
-	      boardcode:0x52,
-	      ad_diff:	2,
-	      ad_chan:	16,
-	      adbits:	12,
-	      adrangetype:0,
-      dabits:	12},
+	.name = "dt2801-a",
+	.boardcode = 0x52,
+	.ad_diff = 2,
+	.ad_chan = 16,
+	.adbits = 12,
+	.adrangetype = 0,
+	.dabits = 12},
 	{
-	      name:	"dt2801/5716a",
-	      boardcode:0x82,
-	      ad_diff:	1,
-	      ad_chan:	16,
-	      adbits:	16,
-	      adrangetype:1,
-      dabits:	12},
+	.name = "dt2801/5716a",
+	.boardcode = 0x82,
+	.ad_diff = 1,
+	.ad_chan = 16,
+	.adbits = 16,
+	.adrangetype = 1,
+	.dabits = 12},
 	{
-	      name:	"dt2805",
-	      boardcode:0x12,
-	      ad_diff:	1,
-	      ad_chan:	16,
-	      adbits:	12,
-	      adrangetype:0,
-      dabits:	12},
+	.name = "dt2805",
+	.boardcode = 0x12,
+	.ad_diff = 1,
+	.ad_chan = 16,
+	.adbits = 12,
+	.adrangetype = 0,
+	.dabits = 12},
 	{
-	      name:	"dt2805/5716a",
-	      boardcode:0x92,
-	      ad_diff:	1,
-	      ad_chan:	16,
-	      adbits:	16,
-	      adrangetype:1,
-      dabits:	12},
+	.name = "dt2805/5716a",
+	.boardcode = 0x92,
+	.ad_diff = 1,
+	.ad_chan = 16,
+	.adbits = 16,
+	.adrangetype = 1,
+	.dabits = 12},
 	{
-	      name:	"dt2808",
-	      boardcode:0x20,
-	      ad_diff:	0,
-	      ad_chan:	16,
-	      adbits:	12,
-	      adrangetype:2,
-      dabits:	8},
+	.name = "dt2808",
+	.boardcode = 0x20,
+	.ad_diff = 0,
+	.ad_chan = 16,
+	.adbits = 12,
+	.adrangetype = 2,
+	.dabits = 8},
 	{
-	      name:	"dt2818",
-	      boardcode:0xa2,
-	      ad_diff:	0,
-	      ad_chan:	4,
-	      adbits:	12,
-	      adrangetype:0,
-      dabits:	12},
+	.name = "dt2818",
+	.boardcode = 0xa2,
+	.ad_diff = 0,
+	.ad_chan = 4,
+	.adbits = 12,
+	.adrangetype = 0,
+	.dabits = 12},
 	{
-	      name:	"dt2809",
-	      boardcode:0xb0,
-	      ad_diff:	0,
-	      ad_chan:	8,
-	      adbits:	12,
-	      adrangetype:1,
-      dabits:	12},
+	.name = "dt2809",
+	.boardcode = 0xb0,
+	.ad_diff = 0,
+	.ad_chan = 8,
+	.adbits = 12,
+	.adrangetype = 1,
+	.dabits = 12},
 };
 
-#define n_boardtypes ((sizeof(boardtypes))/(sizeof(boardtypes[0])))
 #define boardtype (*(const struct dt2801_board *)dev->board_ptr)
 
 struct dt2801_private {
@@ -228,16 +227,16 @@ struct dt2801_private {
 
 #define devpriv ((struct dt2801_private *)dev->private)
 
-static int dt2801_ai_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int dt2801_ao_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int dt2801_ao_insn_write(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int dt2801_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int dt2801_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int dt2801_ai_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int dt2801_ao_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int dt2801_ao_insn_write(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int dt2801_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int dt2801_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
 /* These are the low-level routines:
    writecommand: write a command to the board
@@ -248,7 +247,7 @@ static int dt2801_dio_insn_config(struct comedi_device * dev, struct comedi_subd
 /* Only checks DataOutReady-flag, not the Ready-flag as it is done
    in the examples of the manual. I don't see why this should be
    necessary. */
-static int dt2801_readdata(struct comedi_device * dev, int *data)
+static int dt2801_readdata(struct comedi_device *dev, int *data)
 {
 	int stat = 0;
 	int timeout = DT2801_TIMEOUT;
@@ -267,7 +266,7 @@ static int dt2801_readdata(struct comedi_device * dev, int *data)
 	return -ETIME;
 }
 
-static int dt2801_readdata2(struct comedi_device * dev, int *data)
+static int dt2801_readdata2(struct comedi_device *dev, int *data)
 {
 	int lb, hb;
 	int ret;
@@ -283,7 +282,7 @@ static int dt2801_readdata2(struct comedi_device * dev, int *data)
 	return 0;
 }
 
-static int dt2801_writedata(struct comedi_device * dev, unsigned int data)
+static int dt2801_writedata(struct comedi_device *dev, unsigned int data)
 {
 	int stat = 0;
 	int timeout = DT2801_TIMEOUT;
@@ -309,7 +308,7 @@ static int dt2801_writedata(struct comedi_device * dev, unsigned int data)
 	return -ETIME;
 }
 
-static int dt2801_writedata2(struct comedi_device * dev, unsigned int data)
+static int dt2801_writedata2(struct comedi_device *dev, unsigned int data)
 {
 	int ret;
 
@@ -323,7 +322,7 @@ static int dt2801_writedata2(struct comedi_device * dev, unsigned int data)
 	return 0;
 }
 
-static int dt2801_wait_for_ready(struct comedi_device * dev)
+static int dt2801_wait_for_ready(struct comedi_device *dev)
 {
 	int timeout = DT2801_TIMEOUT;
 	int stat;
@@ -346,7 +345,7 @@ static int dt2801_wait_for_ready(struct comedi_device * dev)
 	return -ETIME;
 }
 
-static int dt2801_writecmd(struct comedi_device * dev, int command)
+static int dt2801_writecmd(struct comedi_device *dev, int command)
 {
 	int stat;
 
@@ -364,7 +363,7 @@ static int dt2801_writecmd(struct comedi_device * dev, int command)
 	return 0;
 }
 
-static int dt2801_reset(struct comedi_device * dev)
+static int dt2801_reset(struct comedi_device *dev)
 {
 	int board_code = 0;
 	unsigned int stat;
@@ -381,11 +380,11 @@ static int dt2801_reset(struct comedi_device * dev)
 	inb_p(dev->iobase + DT2801_DATA);
 
 	DPRINTK("dt2801: stop\n");
-	//dt2801_writecmd(dev,DT_C_STOP);
+	/* dt2801_writecmd(dev,DT_C_STOP); */
 	outb_p(DT_C_STOP, dev->iobase + DT2801_CMD);
 
-	//dt2801_wait_for_ready(dev);
-	comedi_udelay(100);
+	/* dt2801_wait_for_ready(dev); */
+	udelay(100);
 	timeout = 10000;
 	do {
 		stat = inb_p(dev->iobase + DT2801_STATUS);
@@ -395,14 +394,15 @@ static int dt2801_reset(struct comedi_device * dev)
 	if (!timeout) {
 		printk("dt2801: timeout 1 status=0x%02x\n", stat);
 	}
-	//printk("dt2801: reading dummy\n");
-	//dt2801_readdata(dev,&board_code);
+
+	/* printk("dt2801: reading dummy\n"); */
+	/* dt2801_readdata(dev,&board_code); */
 
 	DPRINTK("dt2801: reset\n");
 	outb_p(DT_C_RESET, dev->iobase + DT2801_CMD);
-	//dt2801_writecmd(dev,DT_C_RESET);
+	/* dt2801_writecmd(dev,DT_C_RESET); */
 
-	comedi_udelay(100);
+	udelay(100);
 	timeout = 10000;
 	do {
 		stat = inb_p(dev->iobase + DT2801_STATUS);
@@ -421,7 +421,7 @@ static int dt2801_reset(struct comedi_device * dev)
 	return board_code;
 }
 
-static int probe_number_of_ai_chans(struct comedi_device * dev)
+static int probe_number_of_ai_chans(struct comedi_device *dev)
 {
 	int n_chans;
 	int stat;
@@ -482,7 +482,7 @@ static const struct comedi_lrange *ai_range_lkup(int type, int opt)
 	[4] - dac0 range 0=[-10,10], 1=[-5,5], 2=[-2.5,2.5] 3=[0,10], 4=[0,5]
 	[5] - dac1 range 0=[-10,10], 1=[-5,5], 2=[-2.5,2.5] 3=[0,10], 4=[0,5]
 */
-static int dt2801_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int dt2801_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	unsigned long iobase;
@@ -505,7 +505,7 @@ static int dt2801_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	if (!board_code)
 		board_code = dt2801_reset(dev);
 
-	for (type = 0; type < n_boardtypes; type++) {
+	for (type = 0; type < ARRAY_SIZE(boardtypes); type++) {
 		if (boardtypes[type].boardcode == board_code)
 			goto havetype;
 	}
@@ -520,10 +520,12 @@ static int dt2801_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	n_ai_chans = probe_number_of_ai_chans(dev);
 	printk(" (ai channels = %d)", n_ai_chans);
 
-	if ((ret = alloc_subdevices(dev, 4)) < 0)
+	ret = alloc_subdevices(dev, 4);
+	if (ret < 0)
 		goto out;
 
-	if ((ret = alloc_private(dev, sizeof(struct dt2801_private))) < 0)
+	ret = alloc_private(dev, sizeof(struct dt2801_private));
+	if (ret < 0)
 		goto out;
 
 	dev->board_name = boardtype.name;
@@ -583,7 +585,7 @@ static int dt2801_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	return ret;
 }
 
-static int dt2801_detach(struct comedi_device * dev)
+static int dt2801_detach(struct comedi_device *dev)
 {
 	if (dev->iobase)
 		release_region(dev->iobase, DT2801_IOSIZE);
@@ -591,7 +593,7 @@ static int dt2801_detach(struct comedi_device * dev)
 	return 0;
 }
 
-static int dt2801_error(struct comedi_device * dev, int stat)
+static int dt2801_error(struct comedi_device *dev, int stat)
 {
 	if (stat < 0) {
 		if (stat == -ETIME) {
@@ -609,8 +611,8 @@ static int dt2801_error(struct comedi_device * dev, int stat)
 	return -EIO;
 }
 
-static int dt2801_ai_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dt2801_ai_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int d;
 	int stat;
@@ -631,16 +633,16 @@ static int dt2801_ai_insn_read(struct comedi_device * dev, struct comedi_subdevi
 	return i;
 }
 
-static int dt2801_ao_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dt2801_ao_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	data[0] = devpriv->ao_readback[CR_CHAN(insn->chanspec)];
 
 	return 1;
 }
 
-static int dt2801_ao_insn_write(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dt2801_ao_insn_write(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	dt2801_writecmd(dev, DT_C_WRITE_DAIM);
 	dt2801_writedata(dev, CR_CHAN(insn->chanspec));
@@ -651,8 +653,8 @@ static int dt2801_ao_insn_write(struct comedi_device * dev, struct comedi_subdev
 	return 1;
 }
 
-static int dt2801_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dt2801_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int which = 0;
 
@@ -675,8 +677,8 @@ static int dt2801_dio_insn_bits(struct comedi_device * dev, struct comedi_subdev
 	return 2;
 }
 
-static int dt2801_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dt2801_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int which = 0;
 
diff --git a/drivers/staging/comedi/drivers/dt2811.c b/drivers/staging/comedi/drivers/dt2811.c
index 795932ec67d..7853902be62 100644
--- a/drivers/staging/comedi/drivers/dt2811.c
+++ b/drivers/staging/comedi/drivers/dt2811.c
@@ -45,6 +45,7 @@ Configuration options:
   [4] - D/A 1 range (same choices)
 */
 
+#include <linux/interrupt.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
@@ -214,30 +215,30 @@ static const struct dt2811_board boardtypes[] = {
 
 #define this_board ((const struct dt2811_board *)dev->board_ptr)
 
-static int dt2811_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int dt2811_detach(struct comedi_device * dev);
+static int dt2811_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int dt2811_detach(struct comedi_device *dev);
 static struct comedi_driver driver_dt2811 = {
-      driver_name:"dt2811",
-      module:THIS_MODULE,
-      attach:dt2811_attach,
-      detach:dt2811_detach,
-      board_name:&boardtypes[0].name,
-      num_names:sizeof(boardtypes) / sizeof(struct dt2811_board),
-      offset:sizeof(struct dt2811_board),
+	.driver_name = "dt2811",
+	.module = THIS_MODULE,
+	.attach = dt2811_attach,
+	.detach = dt2811_detach,
+	.board_name = &boardtypes[0].name,
+	.num_names = ARRAY_SIZE(boardtypes),
+	.offset = sizeof(struct dt2811_board),
 };
 
 COMEDI_INITCLEANUP(driver_dt2811);
 
-static int dt2811_ai_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int dt2811_ao_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int dt2811_ao_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int dt2811_di_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int dt2811_do_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int dt2811_ai_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int dt2811_ao_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int dt2811_ao_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int dt2811_di_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int dt2811_do_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
 enum { card_2811_pgh, card_2811_pgl };
 
@@ -265,7 +266,7 @@ static const struct comedi_lrange *dac_range_types[] = {
 #define DT2811_TIMEOUT 5
 
 #if 0
-static irqreturn_t dt2811_interrupt(int irq, void *d PT_REGS_ARG)
+static irqreturn_t dt2811_interrupt(int irq, void *d)
 {
 	int lo, hi;
 	int data;
@@ -311,11 +312,12 @@ static irqreturn_t dt2811_interrupt(int irq, void *d PT_REGS_ARG)
                  2 == unipolar 5V  (0V -- +5V)
 */
 
-static int dt2811_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int dt2811_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
-	//int i, irq;
-	//unsigned long irqs;
-	//long flags;
+	/* int i, irq; */
+	/* unsigned long irqs; */
+	/* long flags; */
+
 	int ret;
 	struct comedi_subdevice *s;
 	unsigned long iobase;
@@ -334,7 +336,7 @@ static int dt2811_attach(struct comedi_device * dev, struct comedi_devconfig * i
 
 #if 0
 	outb(0, dev->iobase + DT2811_ADCSR);
-	comedi_udelay(100);
+	udelay(100);
 	i = inb(dev->iobase + DT2811_ADDATLO);
 	i = inb(dev->iobase + DT2811_ADDATHI);
 #endif
@@ -350,7 +352,7 @@ static int dt2811_attach(struct comedi_device * dev, struct comedi_devconfig * i
 			dev->iobase + DT2811_ADCSR);
 		outb(0, dev->iobase + DT2811_ADGCR);
 
-		comedi_udelay(100);
+		udelay(100);
 
 		irq = probe_irq_off(irqs);
 		restore_flags(flags);
@@ -365,7 +367,7 @@ static int dt2811_attach(struct comedi_device * dev, struct comedi_devconfig * i
 			i = inb(dev->iobase + DT2811_ADDATLO);
 			i = inb(dev->iobase + DT2811_ADDATHI);
 			printk("(irq = %d)\n", irq);
-			ret = comedi_request_irq(irq, dt2811_interrupt, 0,
+			ret = request_irq(irq, dt2811_interrupt, 0,
 				driver_name, dev);
 			if (ret < 0)
 				return -EIO;
@@ -378,10 +380,14 @@ static int dt2811_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	}
 #endif
 
-	if ((ret = alloc_subdevices(dev, 4)) < 0)
+	ret = alloc_subdevices(dev, 4);
+	if (ret < 0)
 		return ret;
-	if ((ret = alloc_private(dev, sizeof(struct dt2811_private))) < 0)
+
+	ret = alloc_private(dev, sizeof(struct dt2811_private));
+	if (ret < 0)
 		return ret;
+
 	switch (it->options[2]) {
 	case 0:
 		devpriv->adc_mux = adc_singleended;
@@ -479,12 +485,12 @@ static int dt2811_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	return 0;
 }
 
-static int dt2811_detach(struct comedi_device * dev)
+static int dt2811_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: dt2811: remove\n", dev->minor);
 
 	if (dev->irq) {
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 	}
 	if (dev->iobase) {
 		release_region(dev->iobase, DT2811_SIZE);
@@ -493,8 +499,8 @@ static int dt2811_detach(struct comedi_device * dev)
 	return 0;
 }
 
-static int dt2811_ai_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dt2811_ai_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int chan = CR_CHAN(insn->chanspec);
 	int timeout = DT2811_TIMEOUT;
@@ -520,7 +526,7 @@ static int dt2811_ai_insn(struct comedi_device * dev, struct comedi_subdevice *
 #if 0
 /* Wow.  This is code from the Comedi stone age.  But it hasn't been
  * replaced, so I'll let it stay. */
-int dt2811_adtrig(kdev_t minor, comedi_adtrig * adtrig)
+int dt2811_adtrig(kdev_t minor, comedi_adtrig *adtrig)
 {
 	struct comedi_device *dev = comedi_devices + minor;
 
@@ -531,7 +537,7 @@ int dt2811_adtrig(kdev_t minor, comedi_adtrig * adtrig)
 	case COMEDI_MDEMAND:
 		dev->ntrig = adtrig->n - 1;
 		/*printk("dt2811: AD soft trigger\n"); */
-		/*outb(DT2811_CLRERROR|DT2811_INTENB,dev->iobase+DT2811_ADCSR); *//* not neccessary */
+		/*outb(DT2811_CLRERROR|DT2811_INTENB,dev->iobase+DT2811_ADCSR); */ /* not neccessary */
 		outb(dev->curadchan, dev->iobase + DT2811_ADGCR);
 		do_gettimeofday(&trigtime);
 		break;
@@ -544,8 +550,8 @@ int dt2811_adtrig(kdev_t minor, comedi_adtrig * adtrig)
 }
 #endif
 
-static int dt2811_ao_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dt2811_ao_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan;
@@ -562,8 +568,8 @@ static int dt2811_ao_insn(struct comedi_device * dev, struct comedi_subdevice *
 	return i;
 }
 
-static int dt2811_ao_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dt2811_ao_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan;
@@ -577,8 +583,8 @@ static int dt2811_ao_insn_read(struct comedi_device * dev, struct comedi_subdevi
 	return i;
 }
 
-static int dt2811_di_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dt2811_di_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -588,8 +594,8 @@ static int dt2811_di_insn_bits(struct comedi_device * dev, struct comedi_subdevi
 	return 2;
 }
 
-static int dt2811_do_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dt2811_do_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
diff --git a/drivers/staging/comedi/drivers/dt2814.c b/drivers/staging/comedi/drivers/dt2814.c
index 8320139160a..5906ddddf65 100644
--- a/drivers/staging/comedi/drivers/dt2814.c
+++ b/drivers/staging/comedi/drivers/dt2814.c
@@ -39,6 +39,7 @@ a power of 10, from 1 to 10^7, of which only 3 or 4 are useful.  In
 addition, the clock does not seem to be very accurate.
 */
 
+#include <linux/interrupt.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
@@ -59,18 +60,18 @@ addition, the clock does not seem to be very accurate.
 #define DT2814_ENB 0x10
 #define DT2814_CHANMASK 0x0f
 
-static int dt2814_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int dt2814_detach(struct comedi_device * dev);
+static int dt2814_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int dt2814_detach(struct comedi_device *dev);
 static struct comedi_driver driver_dt2814 = {
-      driver_name:"dt2814",
-      module:THIS_MODULE,
-      attach:dt2814_attach,
-      detach:dt2814_detach,
+	.driver_name = "dt2814",
+	.module = THIS_MODULE,
+	.attach = dt2814_attach,
+	.detach = dt2814_detach,
 };
 
 COMEDI_INITCLEANUP(driver_dt2814);
 
-static irqreturn_t dt2814_interrupt(int irq, void *dev PT_REGS_ARG);
+static irqreturn_t dt2814_interrupt(int irq, void *dev);
 
 struct dt2814_private {
 
@@ -83,8 +84,8 @@ struct dt2814_private {
 #define DT2814_TIMEOUT 10
 #define DT2814_MAX_SPEED 100000	/* Arbitrary 10 khz limit */
 
-static int dt2814_ai_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dt2814_ai_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n, i, hi, lo;
 	int chan;
@@ -97,7 +98,7 @@ static int dt2814_ai_insn_read(struct comedi_device * dev, struct comedi_subdevi
 		for (i = 0; i < DT2814_TIMEOUT; i++) {
 			status = inb(dev->iobase + DT2814_CSR);
 			printk("dt2814: status: %02x\n", status);
-			comedi_udelay(10);
+			udelay(10);
 			if (status & DT2814_FINISH)
 				break;
 		}
@@ -134,8 +135,8 @@ static int dt2814_ns_to_timer(unsigned int *ns, unsigned int flags)
 	return i;
 }
 
-static int dt2814_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int dt2814_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	int tmp;
@@ -226,7 +227,7 @@ static int dt2814_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice
 	return 0;
 }
 
-static int dt2814_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int dt2814_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct comedi_cmd *cmd = &s->async->cmd;
 	int chan;
@@ -245,7 +246,7 @@ static int dt2814_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s
 
 }
 
-static int dt2814_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int dt2814_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int i, irq;
 	int ret;
@@ -262,7 +263,7 @@ static int dt2814_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	dev->board_name = "dt2814";
 
 	outb(0, dev->iobase + DT2814_CSR);
-	comedi_udelay(100);
+	udelay(100);
 	if (inb(dev->iobase + DT2814_CSR) & DT2814_ERR) {
 		printk("reset error (fatal)\n");
 		return -EIO;
@@ -279,7 +280,7 @@ static int dt2814_attach(struct comedi_device * dev, struct comedi_devconfig * i
 
 		outb(0, dev->iobase + DT2814_CSR);
 
-		comedi_udelay(100);
+		udelay(100);
 
 		irq = probe_irq_off(irqs);
 		restore_flags(flags);
@@ -293,7 +294,7 @@ static int dt2814_attach(struct comedi_device * dev, struct comedi_devconfig * i
 #endif
 	dev->irq = 0;
 	if (irq > 0) {
-		if (comedi_request_irq(irq, dt2814_interrupt, 0, "dt2814", dev)) {
+		if (request_irq(irq, dt2814_interrupt, 0, "dt2814", dev)) {
 			printk("(irq %d unavailable)\n", irq);
 		} else {
 			printk("( irq = %d )\n", irq);
@@ -309,9 +310,12 @@ static int dt2814_attach(struct comedi_device * dev, struct comedi_devconfig * i
 #endif
 	}
 
-	if ((ret = alloc_subdevices(dev, 1)) < 0)
+	ret = alloc_subdevices(dev, 1);
+	if (ret < 0)
 		return ret;
-	if ((ret = alloc_private(dev, sizeof(struct dt2814_private))) < 0)
+
+	ret = alloc_private(dev, sizeof(struct dt2814_private));
+	if (ret < 0)
 		return ret;
 
 	s = dev->subdevices + 0;
@@ -329,12 +333,12 @@ static int dt2814_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	return 0;
 }
 
-static int dt2814_detach(struct comedi_device * dev)
+static int dt2814_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: dt2814: remove\n", dev->minor);
 
 	if (dev->irq) {
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 	}
 	if (dev->iobase) {
 		release_region(dev->iobase, DT2814_SIZE);
@@ -343,7 +347,7 @@ static int dt2814_detach(struct comedi_device * dev)
 	return 0;
 }
 
-static irqreturn_t dt2814_interrupt(int irq, void *d PT_REGS_ARG)
+static irqreturn_t dt2814_interrupt(int irq, void *d)
 {
 	int lo, hi;
 	struct comedi_device *dev = d;
diff --git a/drivers/staging/comedi/drivers/dt2815.c b/drivers/staging/comedi/drivers/dt2815.c
index fccec8a77d5..b42dec60e1b 100644
--- a/drivers/staging/comedi/drivers/dt2815.c
+++ b/drivers/staging/comedi/drivers/dt2815.c
@@ -75,18 +75,18 @@ static const struct comedi_lrange range_dt2815_ao_20_current = { 1, {
 #define DT2815_DATA 0
 #define DT2815_STATUS 1
 
-static int dt2815_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int dt2815_detach(struct comedi_device * dev);
+static int dt2815_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int dt2815_detach(struct comedi_device *dev);
 static struct comedi_driver driver_dt2815 = {
-      driver_name:"dt2815",
-      module:THIS_MODULE,
-      attach:dt2815_attach,
-      detach:dt2815_detach,
+	.driver_name = "dt2815",
+	.module = THIS_MODULE,
+	.attach = dt2815_attach,
+	.detach = dt2815_detach,
 };
 
 COMEDI_INITCLEANUP(driver_dt2815);
 
-static void dt2815_free_resources(struct comedi_device * dev);
+static void dt2815_free_resources(struct comedi_device *dev);
 
 struct dt2815_private {
 
@@ -97,7 +97,7 @@ struct dt2815_private {
 
 #define devpriv ((struct dt2815_private *)dev->private)
 
-static int dt2815_wait_for_status(struct comedi_device * dev, int status)
+static int dt2815_wait_for_status(struct comedi_device *dev, int status)
 {
 	int i;
 
@@ -108,8 +108,8 @@ static int dt2815_wait_for_status(struct comedi_device * dev, int status)
 	return status;
 }
 
-static int dt2815_ao_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dt2815_ao_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
@@ -121,8 +121,8 @@ static int dt2815_ao_insn_read(struct comedi_device * dev, struct comedi_subdevi
 	return i;
 }
 
-static int dt2815_ao_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dt2815_ao_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
@@ -135,7 +135,7 @@ static int dt2815_ao_insn(struct comedi_device * dev, struct comedi_subdevice *
 
 		status = dt2815_wait_for_status(dev, 0x00);
 		if (status != 0) {
-			rt_printk
+			printk
 				("dt2815: failed to write low byte on %d reason %x\n",
 				chan, status);
 			return -EBUSY;
@@ -145,7 +145,7 @@ static int dt2815_ao_insn(struct comedi_device * dev, struct comedi_subdevice *
 
 		status = dt2815_wait_for_status(dev, 0x10);
 		if (status != 0x10) {
-			rt_printk
+			printk
 				("dt2815: failed to write high byte on %d reason %x\n",
 				chan, status);
 			return -EBUSY;
@@ -179,7 +179,7 @@ static int dt2815_ao_insn(struct comedi_device * dev, struct comedi_subdevice *
                  1 == current
  */
 
-static int dt2815_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int dt2815_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	int i;
@@ -226,7 +226,7 @@ static int dt2815_attach(struct comedi_device * dev, struct comedi_devconfig * i
 		/* This is incredibly slow (approx 20 ms) */
 		unsigned int status;
 
-		comedi_udelay(1000);
+		udelay(1000);
 		status = inb(dev->iobase + DT2815_STATUS);
 		if (status == 4) {
 			unsigned int program;
@@ -248,13 +248,13 @@ static int dt2815_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	return 0;
 }
 
-static void dt2815_free_resources(struct comedi_device * dev)
+static void dt2815_free_resources(struct comedi_device *dev)
 {
 	if (dev->iobase)
 		release_region(dev->iobase, DT2815_SIZE);
 }
 
-static int dt2815_detach(struct comedi_device * dev)
+static int dt2815_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: dt2815: remove\n", dev->minor);
 
diff --git a/drivers/staging/comedi/drivers/dt2817.c b/drivers/staging/comedi/drivers/dt2817.c
index 2dc396a44e6..b36f85632f8 100644
--- a/drivers/staging/comedi/drivers/dt2817.c
+++ b/drivers/staging/comedi/drivers/dt2817.c
@@ -47,19 +47,19 @@ Configuration options:
 #define DT2817_CR 0
 #define DT2817_DATA 1
 
-static int dt2817_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int dt2817_detach(struct comedi_device * dev);
+static int dt2817_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int dt2817_detach(struct comedi_device *dev);
 static struct comedi_driver driver_dt2817 = {
-      driver_name:"dt2817",
-      module:THIS_MODULE,
-      attach:dt2817_attach,
-      detach:dt2817_detach,
+	.driver_name = "dt2817",
+	.module = THIS_MODULE,
+	.attach = dt2817_attach,
+	.detach = dt2817_detach,
 };
 
 COMEDI_INITCLEANUP(driver_dt2817);
 
-static int dt2817_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dt2817_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int mask;
 	int chan;
@@ -96,8 +96,8 @@ static int dt2817_dio_insn_config(struct comedi_device * dev, struct comedi_subd
 	return 1;
 }
 
-static int dt2817_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dt2817_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int changed;
 
@@ -131,7 +131,7 @@ static int dt2817_dio_insn_bits(struct comedi_device * dev, struct comedi_subdev
 	return 2;
 }
 
-static int dt2817_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int dt2817_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int ret;
 	struct comedi_subdevice *s;
@@ -146,7 +146,8 @@ static int dt2817_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	dev->iobase = iobase;
 	dev->board_name = "dt2817";
 
-	if ((ret = alloc_subdevices(dev, 1)) < 0)
+	ret = alloc_subdevices(dev, 1);
+	if (ret < 0)
 		return ret;
 
 	s = dev->subdevices + 0;
@@ -167,7 +168,7 @@ static int dt2817_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	return 0;
 }
 
-static int dt2817_detach(struct comedi_device * dev)
+static int dt2817_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: dt2817: remove\n", dev->minor);
 
diff --git a/drivers/staging/comedi/drivers/dt282x.c b/drivers/staging/comedi/drivers/dt282x.c
index 4882c3e679c..22b7304af39 100644
--- a/drivers/staging/comedi/drivers/dt282x.c
+++ b/drivers/staging/comedi/drivers/dt282x.c
@@ -209,132 +209,132 @@ struct dt282x_board {
 };
 
 static const struct dt282x_board boardtypes[] = {
-      {name:"dt2821",
-	      adbits:	12,
-	      adchan_se:16,
-	      adchan_di:8,
-	      ai_speed:20000,
-	      ispgl:	0,
-	      dachan:	2,
-	      dabits:	12,
-		},
-      {name:"dt2821-f",
-	      adbits:	12,
-	      adchan_se:16,
-	      adchan_di:8,
-	      ai_speed:6500,
-	      ispgl:	0,
-	      dachan:	2,
-	      dabits:	12,
-		},
-      {name:"dt2821-g",
-	      adbits:	12,
-	      adchan_se:16,
-	      adchan_di:8,
-	      ai_speed:4000,
-	      ispgl:	0,
-	      dachan:	2,
-	      dabits:	12,
-		},
-      {name:"dt2823",
-	      adbits:	16,
-	      adchan_se:0,
-	      adchan_di:4,
-	      ai_speed:10000,
-	      ispgl:	0,
-	      dachan:	2,
-	      dabits:	16,
-		},
-      {name:"dt2824-pgh",
-	      adbits:	12,
-	      adchan_se:16,
-	      adchan_di:8,
-	      ai_speed:20000,
-	      ispgl:	0,
-	      dachan:	0,
-	      dabits:	0,
-		},
-      {name:"dt2824-pgl",
-	      adbits:	12,
-	      adchan_se:16,
-	      adchan_di:8,
-	      ai_speed:20000,
-	      ispgl:	1,
-	      dachan:	0,
-	      dabits:	0,
-		},
-      {name:"dt2825",
-	      adbits:	12,
-	      adchan_se:16,
-	      adchan_di:8,
-	      ai_speed:20000,
-	      ispgl:	1,
-	      dachan:	2,
-	      dabits:	12,
-		},
-      {name:"dt2827",
-	      adbits:	16,
-	      adchan_se:0,
-	      adchan_di:4,
-	      ai_speed:10000,
-	      ispgl:	0,
-	      dachan:	2,
-	      dabits:	12,
-		},
-      {name:"dt2828",
-	      adbits:	12,
-	      adchan_se:4,
-	      adchan_di:0,
-	      ai_speed:10000,
-	      ispgl:	0,
-	      dachan:	2,
-	      dabits:	12,
-		},
-      {name:"dt2829",
-	      adbits:	16,
-	      adchan_se:8,
-	      adchan_di:0,
-	      ai_speed:33250,
-	      ispgl:	0,
-	      dachan:	2,
-	      dabits:	16,
-		},
-      {name:"dt21-ez",
-	      adbits:	12,
-	      adchan_se:16,
-	      adchan_di:8,
-	      ai_speed:10000,
-	      ispgl:	0,
-	      dachan:	2,
-	      dabits:	12,
-		},
-      {name:"dt23-ez",
-	      adbits:	16,
-	      adchan_se:16,
-	      adchan_di:8,
-	      ai_speed:10000,
-	      ispgl:	0,
-	      dachan:	0,
-	      dabits:	0,
-		},
-      {name:"dt24-ez",
-	      adbits:	12,
-	      adchan_se:16,
-	      adchan_di:8,
-	      ai_speed:10000,
-	      ispgl:	0,
-	      dachan:	0,
-	      dabits:	0,
-		},
-      {name:"dt24-ez-pgl",
-	      adbits:	12,
-	      adchan_se:16,
-	      adchan_di:8,
-	      ai_speed:10000,
-	      ispgl:	1,
-	      dachan:	0,
-	      dabits:	0,
-		},
+	{.name = "dt2821",
+	 .adbits = 12,
+	 .adchan_se = 16,
+	 .adchan_di = 8,
+	 .ai_speed = 20000,
+	 .ispgl = 0,
+	 .dachan = 2,
+	 .dabits = 12,
+	},
+	{.name = "dt2821-f",
+	 .adbits = 12,
+	 .adchan_se = 16,
+	 .adchan_di = 8,
+	 .ai_speed = 6500,
+	 .ispgl = 0,
+	 .dachan = 2,
+	 .dabits = 12,
+	},
+	{.name = "dt2821-g",
+	 .adbits = 12,
+	 .adchan_se = 16,
+	 .adchan_di = 8,
+	 .ai_speed = 4000,
+	 .ispgl = 0,
+	 .dachan = 2,
+	 .dabits = 12,
+	},
+	{.name = "dt2823",
+	 .adbits = 16,
+	 .adchan_se = 0,
+	 .adchan_di = 4,
+	 .ai_speed = 10000,
+	 .ispgl = 0,
+	 .dachan = 2,
+	 .dabits = 16,
+	},
+	{.name = "dt2824-pgh",
+	  .adbits = 12,
+	  .adchan_se = 16,
+	  .adchan_di = 8,
+	  .ai_speed = 20000,
+	  .ispgl = 0,
+	  .dachan = 0,
+	  .dabits = 0,
+	},
+	{.name = "dt2824-pgl",
+	 .adbits = 12,
+	 .adchan_se = 16,
+	 .adchan_di = 8,
+	 .ai_speed = 20000,
+	 .ispgl = 1,
+	 .dachan = 0,
+	 .dabits = 0,
+	},
+	{.name = "dt2825",
+	 .adbits = 12,
+	 .adchan_se = 16,
+	 .adchan_di = 8,
+	 .ai_speed = 20000,
+	 .ispgl = 1,
+	 .dachan = 2,
+	 .dabits = 12,
+	},
+	{.name = "dt2827",
+	 .adbits = 16,
+	 .adchan_se = 0,
+	 .adchan_di = 4,
+	 .ai_speed = 10000,
+	 .ispgl = 0,
+	 .dachan = 2,
+	 .dabits = 12,
+	},
+	{.name = "dt2828",
+	 .adbits = 12,
+	 .adchan_se = 4,
+	 .adchan_di = 0,
+	 .ai_speed = 10000,
+	 .ispgl = 0,
+	 .dachan = 2,
+	 .dabits = 12,
+	},
+	{.name = "dt2829",
+	 .adbits = 16,
+	 .adchan_se = 8,
+	 .adchan_di = 0,
+	 .ai_speed = 33250,
+	 .ispgl = 0,
+	 .dachan = 2,
+	 .dabits = 16,
+	},
+	{.name = "dt21-ez",
+	 .adbits = 12,
+	 .adchan_se = 16,
+	 .adchan_di = 8,
+	 .ai_speed = 10000,
+	 .ispgl = 0,
+	 .dachan = 2,
+	 .dabits = 12,
+	},
+	{.name = "dt23-ez",
+	 .adbits = 16,
+	 .adchan_se = 16,
+	 .adchan_di = 8,
+	 .ai_speed = 10000,
+	 .ispgl = 0,
+	 .dachan = 0,
+	 .dabits = 0,
+	},
+	{.name = "dt24-ez",
+	 .adbits = 12,
+	 .adchan_se = 16,
+	 .adchan_di = 8,
+	 .ai_speed = 10000,
+	 .ispgl = 0,
+	 .dachan = 0,
+	 .dabits = 0,
+	},
+	{.name = "dt24-ez-pgl",
+	 .adbits = 12,
+	 .adchan_se = 16,
+	 .adchan_di = 8,
+	 .ai_speed = 10000,
+	 .ispgl = 1,
+	 .dachan = 0,
+	 .dabits = 0,
+	},
 };
 
 #define n_boardtypes sizeof(boardtypes)/sizeof(struct dt282x_board)
@@ -374,51 +374,51 @@ struct dt282x_private {
  *    Some useless abstractions
  */
 #define chan_to_DAC(a)	((a)&1)
-#define update_dacsr(a)	outw(devpriv->dacsr|(a),dev->iobase+DT2821_DACSR)
-#define update_adcsr(a)	outw(devpriv->adcsr|(a),dev->iobase+DT2821_ADCSR)
+#define update_dacsr(a)	outw(devpriv->dacsr|(a), dev->iobase+DT2821_DACSR)
+#define update_adcsr(a)	outw(devpriv->adcsr|(a), dev->iobase+DT2821_ADCSR)
 #define mux_busy() (inw(dev->iobase+DT2821_ADCSR)&DT2821_MUXBUSY)
 #define ad_done() (inw(dev->iobase+DT2821_ADCSR)&DT2821_ADDONE)
-#define update_supcsr(a)	outw(devpriv->supcsr|(a),dev->iobase+DT2821_SUPCSR)
+#define update_supcsr(a)	outw(devpriv->supcsr|(a), dev->iobase+DT2821_SUPCSR)
 
 /*
  *    danger! macro abuse... a is the expression to wait on, and b is
  *      the statement(s) to execute if it doesn't happen.
  */
-#define wait_for(a,b)	 				\
+#define wait_for(a, b)	 				\
 	do{						\
 		int _i;					\
-		for(_i=0;_i<DT2821_TIMEOUT;_i++){	\
-			if(a){_i=0;break;}		\
-			comedi_udelay(5);			\
+		for (_i=0;_i<DT2821_TIMEOUT;_i++){	\
+			if (a){_i=0;break;}		\
+			udelay(5);			\
 		}					\
-		if(_i){b}				\
-	}while(0)
+		if (_i){b}				\
+	}while (0)
 
-static int dt282x_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int dt282x_detach(struct comedi_device * dev);
+static int dt282x_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int dt282x_detach(struct comedi_device *dev);
 static struct comedi_driver driver_dt282x = {
-      driver_name:"dt282x",
-      module:THIS_MODULE,
-      attach:dt282x_attach,
-      detach:dt282x_detach,
-      board_name:&boardtypes[0].name,
-      num_names:n_boardtypes,
-      offset:sizeof(struct dt282x_board),
+	.driver_name = "dt282x",
+	.module = THIS_MODULE,
+	.attach = dt282x_attach,
+	.detach = dt282x_detach,
+	.board_name = &boardtypes[0].name,
+	.num_names = n_boardtypes,
+	.offset = sizeof(struct dt282x_board),
 };
 
 COMEDI_INITCLEANUP(driver_dt282x);
 
-static void free_resources(struct comedi_device * dev);
-static int prep_ai_dma(struct comedi_device * dev, int chan, int size);
-static int prep_ao_dma(struct comedi_device * dev, int chan, int size);
-static int dt282x_ai_cancel(struct comedi_device * dev, struct comedi_subdevice * s);
-static int dt282x_ao_cancel(struct comedi_device * dev, struct comedi_subdevice * s);
+static void free_resources(struct comedi_device *dev);
+static int prep_ai_dma(struct comedi_device *dev, int chan, int size);
+static int prep_ao_dma(struct comedi_device *dev, int chan, int size);
+static int dt282x_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
+static int dt282x_ao_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
 static int dt282x_ns_to_timer(int *nanosec, int round_mode);
-static void dt282x_disable_dma(struct comedi_device * dev);
+static void dt282x_disable_dma(struct comedi_device *dev);
 
-static int dt282x_grab_dma(struct comedi_device * dev, int dma1, int dma2);
+static int dt282x_grab_dma(struct comedi_device *dev, int dma1, int dma2);
 
-static void dt282x_munge(struct comedi_device * dev, short * buf,
+static void dt282x_munge(struct comedi_device *dev, short *buf,
 	unsigned int nbytes)
 {
 	unsigned int i;
@@ -440,7 +440,7 @@ static void dt282x_munge(struct comedi_device * dev, short * buf,
 	}
 }
 
-static void dt282x_ao_dma_interrupt(struct comedi_device * dev)
+static void dt282x_ao_dma_interrupt(struct comedi_device *dev)
 {
 	void *ptr;
 	int size;
@@ -463,7 +463,7 @@ static void dt282x_ao_dma_interrupt(struct comedi_device * dev)
 
 	size = cfc_read_array_from_buffer(s, ptr, devpriv->dma_maxsize);
 	if (size == 0) {
-		rt_printk("dt282x: AO underrun\n");
+		printk("dt282x: AO underrun\n");
 		dt282x_ao_cancel(dev, s);
 		s->async->events |= COMEDI_CB_OVERFLOW;
 		return;
@@ -472,7 +472,7 @@ static void dt282x_ao_dma_interrupt(struct comedi_device * dev)
 	return;
 }
 
-static void dt282x_ai_dma_interrupt(struct comedi_device * dev)
+static void dt282x_ai_dma_interrupt(struct comedi_device *dev)
 {
 	void *ptr;
 	int size;
@@ -524,7 +524,7 @@ static void dt282x_ai_dma_interrupt(struct comedi_device * dev)
 	prep_ai_dma(dev, i, 0);
 }
 
-static int prep_ai_dma(struct comedi_device * dev, int dma_index, int n)
+static int prep_ai_dma(struct comedi_device *dev, int dma_index, int n)
 {
 	int dma_chan;
 	unsigned long dma_ptr;
@@ -555,7 +555,7 @@ static int prep_ai_dma(struct comedi_device * dev, int dma_index, int n)
 	return n;
 }
 
-static int prep_ao_dma(struct comedi_device * dev, int dma_index, int n)
+static int prep_ao_dma(struct comedi_device *dev, int dma_index, int n)
 {
 	int dma_chan;
 	unsigned long dma_ptr;
@@ -577,7 +577,7 @@ static int prep_ao_dma(struct comedi_device * dev, int dma_index, int n)
 	return n;
 }
 
-static irqreturn_t dt282x_interrupt(int irq, void *d PT_REGS_ARG)
+static irqreturn_t dt282x_interrupt(int irq, void *d)
 {
 	struct comedi_device *dev = d;
 	struct comedi_subdevice *s;
@@ -653,7 +653,7 @@ static irqreturn_t dt282x_interrupt(int irq, void *d PT_REGS_ARG)
 	return IRQ_RETVAL(handled);
 }
 
-static void dt282x_load_changain(struct comedi_device * dev, int n,
+static void dt282x_load_changain(struct comedi_device *dev, int n,
 	unsigned int *chanlist)
 {
 	unsigned int i;
@@ -674,8 +674,8 @@ static void dt282x_load_changain(struct comedi_device * dev, int n,
  *      - preload multiplexer
  *      - trigger conversion and wait for it to finish
  */
-static int dt282x_ai_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dt282x_ai_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 
@@ -706,8 +706,8 @@ static int dt282x_ai_insn_read(struct comedi_device * dev, struct comedi_subdevi
 	return i;
 }
 
-static int dt282x_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int dt282x_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	int tmp;
@@ -818,7 +818,7 @@ static int dt282x_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice
 	return 0;
 }
 
-static int dt282x_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int dt282x_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct comedi_cmd *cmd = &s->async->cmd;
 	int timer;
@@ -879,7 +879,7 @@ static int dt282x_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s
 	return 0;
 }
 
-static void dt282x_disable_dma(struct comedi_device * dev)
+static void dt282x_disable_dma(struct comedi_device *dev)
 {
 	if (devpriv->usedma) {
 		disable_dma(devpriv->dma[0].chan);
@@ -887,7 +887,7 @@ static void dt282x_disable_dma(struct comedi_device * dev)
 	}
 }
 
-static int dt282x_ai_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int dt282x_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	dt282x_disable_dma(dev);
 
@@ -937,16 +937,16 @@ static int dt282x_ns_to_timer(int *nanosec, int round_mode)
  *      offset binary if necessary, loads the data into the DAC
  *      data register, and performs the conversion.
  */
-static int dt282x_ao_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dt282x_ao_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	data[0] = devpriv->ao[CR_CHAN(insn->chanspec)];
 
 	return 1;
 }
 
-static int dt282x_ao_insn_write(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dt282x_ao_insn_write(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	short d;
 	unsigned int chan;
@@ -978,8 +978,8 @@ static int dt282x_ao_insn_write(struct comedi_device * dev, struct comedi_subdev
 	return 1;
 }
 
-static int dt282x_ao_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int dt282x_ao_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	int tmp;
@@ -1029,7 +1029,7 @@ static int dt282x_ao_cmdtest(struct comedi_device * dev, struct comedi_subdevice
 		cmd->start_arg = 0;
 		err++;
 	}
-	if (cmd->scan_begin_arg < 5000 /* XXX unknown */ ) {
+	if (cmd->scan_begin_arg < 5000 /* XXX unknown */) {
 		cmd->scan_begin_arg = 5000;
 		err++;
 	}
@@ -1069,7 +1069,7 @@ static int dt282x_ao_cmdtest(struct comedi_device * dev, struct comedi_subdevice
 
 }
 
-static int dt282x_ao_inttrig(struct comedi_device * dev, struct comedi_subdevice * s,
+static int dt282x_ao_inttrig(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int x)
 {
 	int size;
@@ -1080,7 +1080,7 @@ static int dt282x_ao_inttrig(struct comedi_device * dev, struct comedi_subdevice
 	size = cfc_read_array_from_buffer(s, devpriv->dma[0].buf,
 		devpriv->dma_maxsize);
 	if (size == 0) {
-		rt_printk("dt282x: AO underrun\n");
+		printk("dt282x: AO underrun\n");
 		return -EPIPE;
 	}
 	prep_ao_dma(dev, 0, size);
@@ -1088,7 +1088,7 @@ static int dt282x_ao_inttrig(struct comedi_device * dev, struct comedi_subdevice
 	size = cfc_read_array_from_buffer(s, devpriv->dma[1].buf,
 		devpriv->dma_maxsize);
 	if (size == 0) {
-		rt_printk("dt282x: AO underrun\n");
+		printk("dt282x: AO underrun\n");
 		return -EPIPE;
 	}
 	prep_ao_dma(dev, 1, size);
@@ -1099,7 +1099,7 @@ static int dt282x_ao_inttrig(struct comedi_device * dev, struct comedi_subdevice
 	return 1;
 }
 
-static int dt282x_ao_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int dt282x_ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	int timer;
 	struct comedi_cmd *cmd = &s->async->cmd;
@@ -1132,7 +1132,7 @@ static int dt282x_ao_cmd(struct comedi_device * dev, struct comedi_subdevice * s
 	return 0;
 }
 
-static int dt282x_ao_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int dt282x_ao_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	dt282x_disable_dma(dev);
 
@@ -1145,8 +1145,8 @@ static int dt282x_ao_cancel(struct comedi_device * dev, struct comedi_subdevice
 	return 0;
 }
 
-static int dt282x_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dt282x_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (data[0]) {
 		s->state &= ~data[0];
@@ -1159,8 +1159,8 @@ static int dt282x_dio_insn_bits(struct comedi_device * dev, struct comedi_subdev
 	return 2;
 }
 
-static int dt282x_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dt282x_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int mask;
 
@@ -1240,7 +1240,7 @@ enum { opt_iobase = 0, opt_irq, opt_dma1, opt_dma2,	/* i/o base, irq, dma channe
    9	ao0 0=±10 V, 1=0-10 V, 2=±5 V, 3=0-5 V, 4=±2.5 V
    10	ao1 0=±10 V, 1=0-10 V, 2=±5 V, 3=0-5 V, 4=±2.5 V
  */
-static int dt282x_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int dt282x_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int i, irq;
 	int ret;
@@ -1298,19 +1298,18 @@ static int dt282x_attach(struct comedi_device * dev, struct comedi_devconfig * i
 
 		/* trigger interrupt */
 
-		comedi_udelay(100);
+		udelay(100);
 
 		irq = probe_irq_off(irqs);
 		restore_flags(flags);
-		if (0 /* error */ ) {
+		if (0 /* error */) {
 			printk(" error probing irq (bad)");
 		}
 	}
 #endif
 	if (irq > 0) {
 		printk(" ( irq = %d )", irq);
-		ret = comedi_request_irq(irq, dt282x_interrupt, 0, "dt282x",
-			dev);
+		ret = request_irq(irq, dt282x_interrupt, 0, "dt282x", dev);
 		if (ret < 0) {
 			printk(" failed to get irq\n");
 			return -EIO;
@@ -1326,7 +1325,8 @@ static int dt282x_attach(struct comedi_device * dev, struct comedi_devconfig * i
 #endif
 	}
 
-	if ((ret = alloc_private(dev, sizeof(struct dt282x_private))) < 0)
+	ret = alloc_private(dev, sizeof(struct dt282x_private));
+	if (ret < 0)
 		return ret;
 
 	ret = dt282x_grab_dma(dev, it->options[opt_dma1],
@@ -1334,7 +1334,8 @@ static int dt282x_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	if (ret < 0)
 		return ret;
 
-	if ((ret = alloc_subdevices(dev, 3)) < 0)
+	ret = alloc_subdevices(dev, 3);
+	if (ret < 0)
 		return ret;
 
 	s = dev->subdevices + 0;
@@ -1358,7 +1359,9 @@ static int dt282x_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	devpriv->ad_2scomp = it->options[opt_ai_twos];
 
 	s++;
-	if ((s->n_chan = boardtype.dachan)) {
+
+	s->n_chan = boardtype.dachan;
+	if (s->n_chan) {
 		/* ao subsystem */
 		s->type = COMEDI_SUBD_AO;
 		dev->write_subdev = s;
@@ -1396,10 +1399,10 @@ static int dt282x_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	return 0;
 }
 
-static void free_resources(struct comedi_device * dev)
+static void free_resources(struct comedi_device *dev)
 {
 	if (dev->irq) {
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 	}
 	if (dev->iobase)
 		release_region(dev->iobase, DT2821_SIZE);
@@ -1415,7 +1418,7 @@ static void free_resources(struct comedi_device * dev)
 	}
 }
 
-static int dt282x_detach(struct comedi_device * dev)
+static int dt282x_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: dt282x: remove\n", dev->minor);
 
@@ -1424,7 +1427,7 @@ static int dt282x_detach(struct comedi_device * dev)
 	return 0;
 }
 
-static int dt282x_grab_dma(struct comedi_device * dev, int dma1, int dma2)
+static int dt282x_grab_dma(struct comedi_device *dev, int dma1, int dma2)
 {
 	int ret;
 
diff --git a/drivers/staging/comedi/drivers/dt3000.c b/drivers/staging/comedi/drivers/dt3000.c
index d9467984706..2af8b59f906 100644
--- a/drivers/staging/comedi/drivers/dt3000.c
+++ b/drivers/staging/comedi/drivers/dt3000.c
@@ -59,6 +59,7 @@ AO commands are not supported.
 
 #define DEBUG 1
 
+#include <linux/interrupt.h>
 #include "../comedidev.h"
 #include <linux/delay.h>
 
@@ -95,69 +96,69 @@ struct dt3k_boardtype {
 
 
 static const struct dt3k_boardtype dt3k_boardtypes[] = {
-      {name:"dt3001",
-	      device_id:0x22,
-	      adchan:	16,
-	      adbits:	12,
-	      adrange:	&range_dt3000_ai,
-	      ai_speed:3000,
-	      dachan:	2,
-	      dabits:	12,
-		},
-      {name:"dt3001-pgl",
-	      device_id:0x27,
-	      adchan:	16,
-	      adbits:	12,
-	      adrange:	&range_dt3000_ai_pgl,
-	      ai_speed:3000,
-	      dachan:	2,
-	      dabits:	12,
-		},
-      {name:"dt3002",
-	      device_id:0x23,
-	      adchan:	32,
-	      adbits:	12,
-	      adrange:	&range_dt3000_ai,
-	      ai_speed:3000,
-	      dachan:	0,
-	      dabits:	0,
-		},
-      {name:"dt3003",
-	      device_id:0x24,
-	      adchan:	64,
-	      adbits:	12,
-	      adrange:	&range_dt3000_ai,
-	      ai_speed:3000,
-	      dachan:	2,
-	      dabits:	12,
-		},
-      {name:"dt3003-pgl",
-	      device_id:0x28,
-	      adchan:	64,
-	      adbits:	12,
-	      adrange:	&range_dt3000_ai_pgl,
-	      ai_speed:3000,
-	      dachan:	2,
-	      dabits:	12,
-		},
-      {name:"dt3004",
-	      device_id:0x25,
-	      adchan:	16,
-	      adbits:	16,
-	      adrange:	&range_dt3000_ai,
-	      ai_speed:10000,
-	      dachan:	2,
-	      dabits:	12,
-		},
-      {name:"dt3005",		/* a.k.a. 3004-200 */
-	      device_id:0x26,
-	      adchan:	16,
-	      adbits:	16,
-	      adrange:	&range_dt3000_ai,
-	      ai_speed:5000,
-	      dachan:	2,
-	      dabits:	12,
-		},
+	{.name = "dt3001",
+	 .device_id = 0x22,
+	 .adchan = 16,
+	 .adbits = 12,
+	 .adrange = &range_dt3000_ai,
+	 .ai_speed = 3000,
+	 .dachan = 2,
+	 .dabits = 12,
+	},
+	{.name = "dt3001-pgl",
+	 .device_id = 0x27,
+	 .adchan = 16,
+	 .adbits = 12,
+	 .adrange = &range_dt3000_ai_pgl,
+	 .ai_speed = 3000,
+	 .dachan = 2,
+	 .dabits = 12,
+	},
+	{.name = "dt3002",
+	 .device_id = 0x23,
+	 .adchan = 32,
+	 .adbits = 12,
+	 .adrange = &range_dt3000_ai,
+	 .ai_speed = 3000,
+	 .dachan = 0,
+	 .dabits = 0,
+	},
+	{.name = "dt3003",
+	 .device_id = 0x24,
+	 .adchan = 64,
+	 .adbits = 12,
+	 .adrange = &range_dt3000_ai,
+	 .ai_speed = 3000,
+	 .dachan = 2,
+	 .dabits = 12,
+	},
+	{.name = "dt3003-pgl",
+	 .device_id = 0x28,
+	 .adchan = 64,
+	 .adbits = 12,
+	 .adrange = &range_dt3000_ai_pgl,
+	 .ai_speed = 3000,
+	 .dachan = 2,
+	 .dabits = 12,
+	},
+	{.name = "dt3004",
+	 .device_id = 0x25,
+	 .adchan = 16,
+	 .adbits = 16,
+	 .adrange = &range_dt3000_ai,
+	 .ai_speed = 10000,
+	 .dachan = 2,
+	 .dabits = 12,
+	},
+        {.name = "dt3005",		/* a.k.a. 3004-200 */
+	 .device_id = 0x26,
+	 .adchan = 16,
+	 .adbits = 16,
+	 .adrange = &range_dt3000_ai,
+	 .ai_speed = 5000,
+	 .dachan = 2,
+	 .dabits = 12,
+	},
 };
 
 #define n_dt3k_boards sizeof(dt3k_boardtypes)/sizeof(struct dt3k_boardtype)
@@ -275,28 +276,28 @@ struct dt3k_private {
 
 #define devpriv ((struct dt3k_private *)dev->private)
 
-static int dt3000_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int dt3000_detach(struct comedi_device * dev);
+static int dt3000_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int dt3000_detach(struct comedi_device *dev);
 static struct comedi_driver driver_dt3000 = {
-      driver_name:"dt3000",
-      module:THIS_MODULE,
-      attach:dt3000_attach,
-      detach:dt3000_detach,
+	.driver_name = "dt3000",
+	.module = THIS_MODULE,
+	.attach = dt3000_attach,
+	.detach = dt3000_detach,
 };
 
 COMEDI_PCI_INITCLEANUP(driver_dt3000, dt3k_pci_table);
 
-static void dt3k_ai_empty_fifo(struct comedi_device * dev, struct comedi_subdevice * s);
+static void dt3k_ai_empty_fifo(struct comedi_device *dev, struct comedi_subdevice *s);
 static int dt3k_ns_to_timer(unsigned int timer_base, unsigned int *arg,
 	unsigned int round_mode);
-static int dt3k_ai_cancel(struct comedi_device * dev, struct comedi_subdevice * s);
+static int dt3k_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
 #ifdef DEBUG
 static void debug_intr_flags(unsigned int flags);
 #endif
 
 #define TIMEOUT 100
 
-static int dt3k_send_cmd(struct comedi_device * dev, unsigned int cmd)
+static int dt3k_send_cmd(struct comedi_device *dev, unsigned int cmd)
 {
 	int i;
 	unsigned int status = 0;
@@ -307,7 +308,7 @@ static int dt3k_send_cmd(struct comedi_device * dev, unsigned int cmd)
 		status = readw(devpriv->io_addr + DPR_Command_Mbx);
 		if ((status & DT3000_COMPLETION_MASK) != DT3000_NOTPROCESSED)
 			break;
-		comedi_udelay(1);
+		udelay(1);
 	}
 	if ((status & DT3000_COMPLETION_MASK) == DT3000_NOERROR) {
 		return 0;
@@ -318,7 +319,7 @@ static int dt3k_send_cmd(struct comedi_device * dev, unsigned int cmd)
 	return -ETIME;
 }
 
-static unsigned int dt3k_readsingle(struct comedi_device * dev, unsigned int subsys,
+static unsigned int dt3k_readsingle(struct comedi_device *dev, unsigned int subsys,
 	unsigned int chan, unsigned int gain)
 {
 	writew(subsys, devpriv->io_addr + DPR_SubSys);
@@ -331,7 +332,7 @@ static unsigned int dt3k_readsingle(struct comedi_device * dev, unsigned int sub
 	return readw(devpriv->io_addr + DPR_Params(2));
 }
 
-static void dt3k_writesingle(struct comedi_device * dev, unsigned int subsys,
+static void dt3k_writesingle(struct comedi_device *dev, unsigned int subsys,
 	unsigned int chan, unsigned int data)
 {
 	writew(subsys, devpriv->io_addr + DPR_SubSys);
@@ -345,9 +346,9 @@ static void dt3k_writesingle(struct comedi_device * dev, unsigned int subsys,
 
 static int debug_n_ints = 0;
 
-// FIXME! Assumes shared interrupt is for this card.
-// What's this debug_n_ints stuff? Obviously needs some work...
-static irqreturn_t dt3k_interrupt(int irq, void *d PT_REGS_ARG)
+/* FIXME! Assumes shared interrupt is for this card. */
+/* What's this debug_n_ints stuff? Obviously needs some work... */
+static irqreturn_t dt3k_interrupt(int irq, void *d)
 {
 	struct comedi_device *dev = d;
 	struct comedi_subdevice *s;
@@ -400,7 +401,7 @@ static void debug_intr_flags(unsigned int flags)
 }
 #endif
 
-static void dt3k_ai_empty_fifo(struct comedi_device * dev, struct comedi_subdevice * s)
+static void dt3k_ai_empty_fifo(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	int front;
 	int rear;
@@ -429,8 +430,8 @@ static void dt3k_ai_empty_fifo(struct comedi_device * dev, struct comedi_subdevi
 	writew(rear, devpriv->io_addr + DPR_AD_Buf_Rear);
 }
 
-static int dt3k_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int dt3k_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	int tmp;
@@ -591,7 +592,7 @@ static int dt3k_ns_to_timer(unsigned int timer_base, unsigned int *nanosec,
 	return (prescale << 16) | (divider);
 }
 
-static int dt3k_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int dt3k_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct comedi_cmd *cmd = &s->async->cmd;
 	int i;
@@ -659,7 +660,7 @@ static int dt3k_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 	return 0;
 }
 
-static int dt3k_ai_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int dt3k_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	int ret;
 
@@ -671,8 +672,8 @@ static int dt3k_ai_cancel(struct comedi_device * dev, struct comedi_subdevice *
 	return 0;
 }
 
-static int dt3k_ai_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dt3k_ai_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	unsigned int chan, gain, aref;
@@ -689,8 +690,8 @@ static int dt3k_ai_insn(struct comedi_device * dev, struct comedi_subdevice * s,
 	return i;
 }
 
-static int dt3k_ao_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dt3k_ao_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	unsigned int chan;
@@ -704,8 +705,8 @@ static int dt3k_ao_insn(struct comedi_device * dev, struct comedi_subdevice * s,
 	return i;
 }
 
-static int dt3k_ao_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dt3k_ao_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	unsigned int chan;
@@ -718,7 +719,7 @@ static int dt3k_ao_insn_read(struct comedi_device * dev, struct comedi_subdevice
 	return i;
 }
 
-static void dt3k_dio_config(struct comedi_device * dev, int bits)
+static void dt3k_dio_config(struct comedi_device *dev, int bits)
 {
 	/* XXX */
 	writew(SUBS_DOUT, devpriv->io_addr + DPR_SubSys);
@@ -733,8 +734,8 @@ static void dt3k_dio_config(struct comedi_device * dev, int bits)
 	dt3k_send_cmd(dev, CMD_CONFIG);
 }
 
-static int dt3k_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dt3k_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int mask;
 
@@ -764,8 +765,8 @@ static int dt3k_dio_insn_config(struct comedi_device * dev, struct comedi_subdev
 	return insn->n;
 }
 
-static int dt3k_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dt3k_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -780,8 +781,8 @@ static int dt3k_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevic
 	return 2;
 }
 
-static int dt3k_mem_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dt3k_mem_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int addr = CR_CHAN(insn->chanspec);
 	int i;
@@ -799,9 +800,9 @@ static int dt3k_mem_insn_read(struct comedi_device * dev, struct comedi_subdevic
 	return i;
 }
 
-static int dt_pci_probe(struct comedi_device * dev, int bus, int slot);
+static int dt_pci_probe(struct comedi_device *dev, int bus, int slot);
 
-static int dt3000_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int dt3000_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	int bus, slot;
@@ -811,7 +812,8 @@ static int dt3000_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	bus = it->options[0];
 	slot = it->options[1];
 
-	if ((ret = alloc_private(dev, sizeof(struct dt3k_private))) < 0)
+	ret = alloc_private(dev, sizeof(struct dt3k_private));
+	if (ret < 0)
 		return ret;
 
 	ret = dt_pci_probe(dev, bus, slot);
@@ -824,14 +826,15 @@ static int dt3000_attach(struct comedi_device * dev, struct comedi_devconfig * i
 
 	dev->board_name = this_board->name;
 
-	if (comedi_request_irq(devpriv->pci_dev->irq, dt3k_interrupt,
-			IRQF_SHARED, "dt3000", dev)) {
+	if (request_irq(devpriv->pci_dev->irq, dt3k_interrupt, IRQF_SHARED,
+			"dt3000", dev)) {
 		printk(" unable to allocate IRQ %u\n", devpriv->pci_dev->irq);
 		return -EINVAL;
 	}
 	dev->irq = devpriv->pci_dev->irq;
 
-	if ((ret = alloc_subdevices(dev, 4)) < 0)
+	ret = alloc_subdevices(dev, 4);
+	if (ret < 0)
 		return ret;
 
 	s = dev->subdevices;
@@ -890,10 +893,10 @@ static int dt3000_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	return 0;
 }
 
-static int dt3000_detach(struct comedi_device * dev)
+static int dt3000_detach(struct comedi_device *dev)
 {
 	if (dev->irq)
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 
 	if (devpriv) {
 		if (devpriv->pci_dev) {
@@ -911,9 +914,9 @@ static int dt3000_detach(struct comedi_device * dev)
 }
 
 static struct pci_dev *dt_pci_find_device(struct pci_dev *from, int *board);
-static int setup_pci(struct comedi_device * dev);
+static int setup_pci(struct comedi_device *dev);
 
-static int dt_pci_probe(struct comedi_device * dev, int bus, int slot)
+static int dt_pci_probe(struct comedi_device *dev, int bus, int slot)
 {
 	int board;
 	int ret;
@@ -935,13 +938,14 @@ static int dt_pci_probe(struct comedi_device * dev, int bus, int slot)
 	if (!devpriv->pci_dev)
 		return 0;
 
-	if ((ret = setup_pci(dev)) < 0)
+	ret = setup_pci(dev);
+	if (ret < 0)
 		return ret;
 
 	return 1;
 }
 
-static int setup_pci(struct comedi_device * dev)
+static int setup_pci(struct comedi_device *dev)
 {
 	resource_size_t addr;
 	int ret;
diff --git a/drivers/staging/comedi/drivers/fl512.c b/drivers/staging/comedi/drivers/fl512.c
index 6d7bb37d2b1..b8657c47d4c 100644
--- a/drivers/staging/comedi/drivers/fl512.c
+++ b/drivers/staging/comedi/drivers/fl512.c
@@ -42,30 +42,30 @@ static const struct comedi_lrange range_fl512 = { 4, {
 	}
 };
 
-static int fl512_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int fl512_detach(struct comedi_device * dev);
+static int fl512_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int fl512_detach(struct comedi_device *dev);
 
 static struct comedi_driver driver_fl512 = {
-      driver_name:"fl512",
-      module:THIS_MODULE,
-      attach:fl512_attach,
-      detach:fl512_detach,
+	.driver_name = "fl512",
+	.module = THIS_MODULE,
+	.attach = fl512_attach,
+	.detach = fl512_detach,
 };
 
 COMEDI_INITCLEANUP(driver_fl512);
 
-static int fl512_ai_insn(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data);
-static int fl512_ao_insn(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data);
-static int fl512_ao_insn_readback(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data);
+static int fl512_ai_insn(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data);
+static int fl512_ao_insn(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data);
+static int fl512_ao_insn_readback(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data);
 
 /*
  * fl512_ai_insn : this is the analog input function
  */
-static int fl512_ai_insn(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+static int fl512_ai_insn(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 	int n;
 	unsigned int lo_byte, hi_byte;
@@ -78,7 +78,7 @@ static int fl512_ai_insn(struct comedi_device * dev,
 		outb(chan, iobase + 2);	/* select chan */
 		outb(0, iobase + 3);	/* start conversion */
 		/* XXX should test "done" flag instead of delay */
-		comedi_udelay(30);	/* sleep 30 usec */
+		udelay(30);	/* sleep 30 usec */
 		lo_byte = inb(iobase + 2);	/* low 8 byte */
 		hi_byte = inb(iobase + 3) & 0xf;	/* high 4 bit and mask */
 		data[n] = lo_byte + (hi_byte << 8);
@@ -89,8 +89,8 @@ static int fl512_ai_insn(struct comedi_device * dev,
 /*
  * fl512_ao_insn : used to write to a DA port n times
  */
-static int fl512_ao_insn(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+static int fl512_ao_insn(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 	int n;
 	int chan = CR_CHAN(insn->chanspec);	/* get chan to write */
@@ -110,8 +110,8 @@ static int fl512_ao_insn(struct comedi_device * dev,
  * fl512_ao_insn_readback : used to read previous values written to
  * DA port
  */
-static int fl512_ao_insn_readback(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+static int fl512_ao_insn_readback(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 	int n;
 	int chan = CR_CHAN(insn->chanspec);
@@ -126,7 +126,7 @@ static int fl512_ao_insn_readback(struct comedi_device * dev,
 /*
  * start attach
  */
-static int fl512_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int fl512_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	unsigned long iobase;
 	struct comedi_subdevice *s;	/* pointer to the subdevice:
@@ -177,7 +177,7 @@ static int fl512_attach(struct comedi_device * dev, struct comedi_devconfig * it
 	return 1;
 }
 
-static int fl512_detach(struct comedi_device * dev)
+static int fl512_detach(struct comedi_device *dev)
 {
 	if (dev->iobase)
 		release_region(dev->iobase, FL512_SIZE);
diff --git a/drivers/staging/comedi/drivers/gsc_hpdi.c b/drivers/staging/comedi/drivers/gsc_hpdi.c
index 49e5c86c2dd..b156ae717ae 100644
--- a/drivers/staging/comedi/drivers/gsc_hpdi.c
+++ b/drivers/staging/comedi/drivers/gsc_hpdi.c
@@ -45,6 +45,7 @@ support could be added to this driver.
 
 */
 
+#include <linux/interrupt.h>
 #include "../comedidev.h"
 #include <linux/delay.h>
 
@@ -52,31 +53,31 @@ support could be added to this driver.
 #include "plx9080.h"
 #include "comedi_fc.h"
 
-static int hpdi_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int hpdi_detach(struct comedi_device * dev);
-void abort_dma(struct comedi_device * dev, unsigned int channel);
-static int hpdi_cmd(struct comedi_device * dev, struct comedi_subdevice * s);
-static int hpdi_cmd_test(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd);
-static int hpdi_cancel(struct comedi_device * dev, struct comedi_subdevice * s);
-static irqreturn_t handle_interrupt(int irq, void *d PT_REGS_ARG);
-static int dio_config_block_size(struct comedi_device * dev, unsigned int * data);
+static int hpdi_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int hpdi_detach(struct comedi_device *dev);
+void abort_dma(struct comedi_device *dev, unsigned int channel);
+static int hpdi_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
+static int hpdi_cmd_test(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd);
+static int hpdi_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
+static irqreturn_t handle_interrupt(int irq, void *d);
+static int dio_config_block_size(struct comedi_device *dev, unsigned int *data);
 
-#undef HPDI_DEBUG		// disable debugging messages
-//#define HPDI_DEBUG    // enable debugging code
+#undef HPDI_DEBUG		/*  disable debugging messages */
+/* #define HPDI_DEBUG      enable debugging code */
 
 #ifdef HPDI_DEBUG
-#define DEBUG_PRINT(format, args...)  rt_printk(format , ## args )
+#define DEBUG_PRINT(format, args...)  printk(format , ## args)
 #else
 #define DEBUG_PRINT(format, args...)
 #endif
 
-#define TIMER_BASE 50		// 20MHz master clock
+#define TIMER_BASE 50		/*  20MHz master clock */
 #define DMA_BUFFER_SIZE 0x10000
 #define NUM_DMA_BUFFERS 4
 #define NUM_DMA_DESCRIPTORS 256
 
-// indices of base address regions
+/* indices of base address regions */
 enum base_address_regions {
 	PLX9080_BADDRINDEX = 0,
 	HPDI_BADDRINDEX = 2,
@@ -109,13 +110,13 @@ enum hpdi_registers {
 int command_channel_valid(unsigned int channel)
 {
 	if (channel == 0 || channel > 6) {
-		rt_printk("gsc_hpdi: bug! invalid cable command channel\n");
+		printk("gsc_hpdi: bug! invalid cable command channel\n");
 		return 0;
 	}
 	return 1;
 }
 
-// bit definitions
+/* bit definitions */
 
 enum firmware_revision_bits {
 	FEATURES_REG_PRESENT_BIT = 0x8000,
@@ -184,7 +185,7 @@ enum board_status_bits {
 
 uint32_t almost_full_bits(unsigned int num_words)
 {
-// XXX need to add or subtract one?
+/* XXX need to add or subtract one? */
 	return (num_words << 16) & 0xff0000;
 }
 
@@ -194,7 +195,7 @@ uint32_t almost_empty_bits(unsigned int num_words)
 }
 unsigned int almost_full_num_words(uint32_t bits)
 {
-// XXX need to add or subtract one?
+/* XXX need to add or subtract one? */
 	return (bits >> 16) & 0xffff;
 }
 unsigned int almost_empty_num_words(uint32_t bits)
@@ -263,31 +264,26 @@ uint32_t intr_active_high_bit(int interrupt_source)
 struct hpdi_board {
 
 	char *name;
-	int device_id;		// pci device id
-	int subdevice_id;	// pci subdevice id
+	int device_id;		/*  pci device id */
+	int subdevice_id;	/*  pci subdevice id */
 };
 
 
 static const struct hpdi_board hpdi_boards[] = {
 	{
-	      name:	"pci-hpdi32",
-	      device_id:PCI_DEVICE_ID_PLX_9080,
-	      subdevice_id:0x2400,
+	.name = "pci-hpdi32",
+	.device_id = PCI_DEVICE_ID_PLX_9080,
+	.subdevice_id = 0x2400,
 		},
 #if 0
 	{
-	      name:	"pxi-hpdi32",
-	      device_id:0x9656,
-	      subdevice_id:0x2705,
+	.name = "pxi-hpdi32",
+	.device_id = 0x9656,
+	.subdevice_id = 0x2705,
 		},
 #endif
 };
 
-static inline unsigned int num_boards(void)
-{
-	return sizeof(hpdi_boards) / sizeof(struct hpdi_board);
-}
-
 static DEFINE_PCI_DEVICE_TABLE(hpdi_pci_table) = {
 	{PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9080, PCI_VENDOR_ID_PLX, 0x2400,
 		0, 0, 0},
@@ -303,25 +299,25 @@ static inline struct hpdi_board *board(const struct comedi_device * dev)
 
 struct hpdi_private {
 
-	struct pci_dev *hw_dev;	// pointer to board's pci_dev struct
-	// base addresses (physical)
+	struct pci_dev *hw_dev;	/*  pointer to board's pci_dev struct */
+	/*  base addresses (physical) */
 	resource_size_t plx9080_phys_iobase;
 	resource_size_t hpdi_phys_iobase;
-	// base addresses (ioremapped)
+	/*  base addresses (ioremapped) */
 	void *plx9080_iobase;
 	void *hpdi_iobase;
-	uint32_t *dio_buffer[NUM_DMA_BUFFERS];	// dma buffers
-	dma_addr_t dio_buffer_phys_addr[NUM_DMA_BUFFERS];	// physical addresses of dma buffers
-	struct plx_dma_desc *dma_desc;	// array of dma descriptors read by plx9080, allocated to get proper alignment
-	dma_addr_t dma_desc_phys_addr;	// physical address of dma descriptor array
+	uint32_t *dio_buffer[NUM_DMA_BUFFERS];	/*  dma buffers */
+	dma_addr_t dio_buffer_phys_addr[NUM_DMA_BUFFERS];	/*  physical addresses of dma buffers */
+	struct plx_dma_desc *dma_desc;	/*  array of dma descriptors read by plx9080, allocated to get proper alignment */
+	dma_addr_t dma_desc_phys_addr;	/*  physical address of dma descriptor array */
 	unsigned int num_dma_descriptors;
-	uint32_t *desc_dio_buffer[NUM_DMA_DESCRIPTORS];	// pointer to start of buffers indexed by descriptor
-	volatile unsigned int dma_desc_index;	// index of the dma descriptor that is currently being used
+	uint32_t *desc_dio_buffer[NUM_DMA_DESCRIPTORS];	/*  pointer to start of buffers indexed by descriptor */
+	volatile unsigned int dma_desc_index;	/*  index of the dma descriptor that is currently being used */
 	unsigned int tx_fifo_size;
 	unsigned int rx_fifo_size;
 	volatile unsigned long dio_count;
-	volatile uint32_t bits[24];	// software copies of values written to hpdi registers
-	volatile unsigned int block_size;	// number of bytes at which to generate COMEDI_CB_BLOCK events
+	volatile uint32_t bits[24];	/*  software copies of values written to hpdi registers */
+	volatile unsigned int block_size;	/*  number of bytes at which to generate COMEDI_CB_BLOCK events */
 	unsigned dio_config_output:1;
 };
 
@@ -332,16 +328,16 @@ static inline struct hpdi_private *priv(struct comedi_device * dev)
 }
 
 static struct comedi_driver driver_hpdi = {
-      driver_name:"gsc_hpdi",
-      module:THIS_MODULE,
-      attach:hpdi_attach,
-      detach:hpdi_detach,
+	.driver_name = "gsc_hpdi",
+	.module = THIS_MODULE,
+	.attach = hpdi_attach,
+	.detach = hpdi_detach,
 };
 
 COMEDI_PCI_INITCLEANUP(driver_hpdi, hpdi_pci_table);
 
-static int dio_config_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dio_config_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	switch (data[0]) {
 	case INSN_CONFIG_DIO_OUTPUT:
@@ -368,18 +364,18 @@ static int dio_config_insn(struct comedi_device * dev, struct comedi_subdevice *
 	return -EINVAL;
 }
 
-static void disable_plx_interrupts(struct comedi_device * dev)
+static void disable_plx_interrupts(struct comedi_device *dev)
 {
 	writel(0, priv(dev)->plx9080_iobase + PLX_INTRCS_REG);
 }
 
-// initialize plx9080 chip
-static void init_plx9080(struct comedi_device * dev)
+/* initialize plx9080 chip */
+static void init_plx9080(struct comedi_device *dev)
 {
 	uint32_t bits;
 	void *plx_iobase = priv(dev)->plx9080_iobase;
 
-	// plx9080 dump
+	/*  plx9080 dump */
 	DEBUG_PRINT(" plx interrupt status 0x%x\n",
 		readl(plx_iobase + PLX_INTRCS_REG));
 	DEBUG_PRINT(" plx id bits 0x%x\n", readl(plx_iobase + PLX_ID_REG));
@@ -417,21 +413,21 @@ static void init_plx9080(struct comedi_device * dev)
 	abort_dma(dev, 0);
 	abort_dma(dev, 1);
 
-	// configure dma0 mode
+	/*  configure dma0 mode */
 	bits = 0;
-	// enable ready input
+	/*  enable ready input */
 	bits |= PLX_DMA_EN_READYIN_BIT;
-	// enable dma chaining
+	/*  enable dma chaining */
 	bits |= PLX_EN_CHAIN_BIT;
-	// enable interrupt on dma done (probably don't need this, since chain never finishes)
+	/*  enable interrupt on dma done (probably don't need this, since chain never finishes) */
 	bits |= PLX_EN_DMA_DONE_INTR_BIT;
-	// don't increment local address during transfers (we are transferring from a fixed fifo register)
+	/*  don't increment local address during transfers (we are transferring from a fixed fifo register) */
 	bits |= PLX_LOCAL_ADDR_CONST_BIT;
-	// route dma interrupt to pci bus
+	/*  route dma interrupt to pci bus */
 	bits |= PLX_DMA_INTR_PCI_BIT;
-	// enable demand mode
+	/*  enable demand mode */
 	bits |= PLX_DEMAND_MODE_BIT;
-	// enable local burst mode
+	/*  enable local burst mode */
 	bits |= PLX_DMA_LOCAL_BURST_EN_BIT;
 	bits |= PLX_LOCAL_BUS_32_WIDE_BITS;
 	writel(bits, plx_iobase + PLX_DMA0_MODE_REG);
@@ -439,7 +435,7 @@ static void init_plx9080(struct comedi_device * dev)
 
 /* Allocate and initialize the subdevice structures.
  */
-static int setup_subdevices(struct comedi_device * dev)
+static int setup_subdevices(struct comedi_device *dev)
 {
 	struct comedi_subdevice *s;
 
@@ -465,12 +461,12 @@ static int setup_subdevices(struct comedi_device * dev)
 	return 0;
 }
 
-static int init_hpdi(struct comedi_device * dev)
+static int init_hpdi(struct comedi_device *dev)
 {
 	uint32_t plx_intcsr_bits;
 
 	writel(BOARD_RESET_BIT, priv(dev)->hpdi_iobase + BOARD_CONTROL_REG);
-	comedi_udelay(10);
+	udelay(10);
 
 	writel(almost_empty_bits(32) | almost_full_bits(32),
 		priv(dev)->hpdi_iobase + RX_PROG_ALMOST_REG);
@@ -484,7 +480,7 @@ static int init_hpdi(struct comedi_device * dev)
 
 	writel(0, priv(dev)->hpdi_iobase + INTERRUPT_CONTROL_REG);
 
-	// enable interrupts
+	/*  enable interrupts */
 	plx_intcsr_bits =
 		ICS_AERR | ICS_PERR | ICS_PIE | ICS_PLIE | ICS_PAIE | ICS_LIE |
 		ICS_DMA0_E;
@@ -493,8 +489,8 @@ static int init_hpdi(struct comedi_device * dev)
 	return 0;
 }
 
-// setup dma descriptors so a link completes every 'transfer_size' bytes
-static int setup_dma_descriptors(struct comedi_device * dev,
+/* setup dma descriptors so a link completes every 'transfer_size' bytes */
+static int setup_dma_descriptors(struct comedi_device *dev,
 	unsigned int transfer_size)
 {
 	unsigned int buffer_index, buffer_offset;
@@ -545,7 +541,7 @@ static int setup_dma_descriptors(struct comedi_device * dev,
 			(unsigned long)priv(dev)->dma_desc[i].next);
 	}
 	priv(dev)->num_dma_descriptors = i;
-	// fix last descriptor to point back to first
+	/*  fix last descriptor to point back to first */
 	priv(dev)->dma_desc[i - 1].next =
 		cpu_to_le32(priv(dev)->dma_desc_phys_addr | next_bits);
 	DEBUG_PRINT(" desc %i next fixup 0x%lx\n", i - 1,
@@ -556,7 +552,7 @@ static int setup_dma_descriptors(struct comedi_device * dev,
 	return transfer_size;
 }
 
-static int hpdi_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int hpdi_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct pci_dev *pcidev;
 	int i;
@@ -568,14 +564,14 @@ static int hpdi_attach(struct comedi_device * dev, struct comedi_devconfig * it)
 		return -ENOMEM;
 
 	pcidev = NULL;
-	for (i = 0; i < num_boards() && dev->board_ptr == NULL; i++) {
+	for (i = 0; i < ARRAY_SIZE(hpdi_boards) && dev->board_ptr == NULL; i++) {
 		do {
 			pcidev = pci_get_subsys(PCI_VENDOR_ID_PLX,
 				hpdi_boards[i].device_id, PCI_VENDOR_ID_PLX,
 				hpdi_boards[i].subdevice_id, pcidev);
-			// was a particular bus/slot requested?
+			/*  was a particular bus/slot requested? */
 			if (it->options[0] || it->options[1]) {
-				// are we on the wrong bus/slot?
+				/*  are we on the wrong bus/slot? */
 				if (pcidev->bus->number != it->options[0] ||
 					PCI_SLOT(pcidev->devfn) !=
 					it->options[1])
@@ -603,7 +599,7 @@ static int hpdi_attach(struct comedi_device * dev, struct comedi_devconfig * it)
 	}
 	pci_set_master(pcidev);
 
-	//Initialize dev->board_name
+	/* Initialize dev->board_name */
 	dev->board_name = board(dev)->name;
 
 	priv(dev)->plx9080_phys_iobase =
@@ -611,7 +607,7 @@ static int hpdi_attach(struct comedi_device * dev, struct comedi_devconfig * it)
 	priv(dev)->hpdi_phys_iobase =
 		pci_resource_start(pcidev, HPDI_BADDRINDEX);
 
-	// remap, won't work with 2.0 kernels but who cares
+	/*  remap, won't work with 2.0 kernels but who cares */
 	priv(dev)->plx9080_iobase = ioremap(priv(dev)->plx9080_phys_iobase,
 		pci_resource_len(pcidev, PLX9080_BADDRINDEX));
 	priv(dev)->hpdi_iobase = ioremap(priv(dev)->hpdi_phys_iobase,
@@ -626,8 +622,8 @@ static int hpdi_attach(struct comedi_device * dev, struct comedi_devconfig * it)
 
 	init_plx9080(dev);
 
-	// get irq
-	if (comedi_request_irq(pcidev->irq, handle_interrupt, IRQF_SHARED,
+	/*  get irq */
+	if (request_irq(pcidev->irq, handle_interrupt, IRQF_SHARED,
 			driver_hpdi.driver_name, dev)) {
 		printk(" unable to allocate irq %u\n", pcidev->irq);
 		return -EINVAL;
@@ -636,7 +632,7 @@ static int hpdi_attach(struct comedi_device * dev, struct comedi_devconfig * it)
 
 	printk(" irq %u\n", dev->irq);
 
-	// alocate pci dma buffers
+	/*  alocate pci dma buffers */
 	for (i = 0; i < NUM_DMA_BUFFERS; i++) {
 		priv(dev)->dio_buffer[i] =
 			pci_alloc_consistent(priv(dev)->hw_dev, DMA_BUFFER_SIZE,
@@ -645,7 +641,7 @@ static int hpdi_attach(struct comedi_device * dev, struct comedi_devconfig * it)
 			priv(dev)->dio_buffer[i],
 			(unsigned long)priv(dev)->dio_buffer_phys_addr[i]);
 	}
-	// allocate dma descriptors
+	/*  allocate dma descriptors */
 	priv(dev)->dma_desc = pci_alloc_consistent(priv(dev)->hw_dev,
 		sizeof(struct plx_dma_desc) * NUM_DMA_DESCRIPTORS,
 		&priv(dev)->dma_desc_phys_addr);
@@ -665,14 +661,14 @@ static int hpdi_attach(struct comedi_device * dev, struct comedi_devconfig * it)
 	return init_hpdi(dev);
 }
 
-static int hpdi_detach(struct comedi_device * dev)
+static int hpdi_detach(struct comedi_device *dev)
 {
 	unsigned int i;
 
 	printk("comedi%d: gsc_hpdi: remove\n", dev->minor);
 
 	if (dev->irq)
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 	if (priv(dev)) {
 		if (priv(dev)->hw_dev) {
 			if (priv(dev)->plx9080_iobase) {
@@ -681,7 +677,7 @@ static int hpdi_detach(struct comedi_device * dev)
 			}
 			if (priv(dev)->hpdi_iobase)
 				iounmap((void *)priv(dev)->hpdi_iobase);
-			// free pci dma buffers
+			/*  free pci dma buffers */
 			for (i = 0; i < NUM_DMA_BUFFERS; i++) {
 				if (priv(dev)->dio_buffer[i])
 					pci_free_consistent(priv(dev)->hw_dev,
@@ -690,7 +686,7 @@ static int hpdi_detach(struct comedi_device * dev)
 						priv(dev)->
 						dio_buffer_phys_addr[i]);
 			}
-			// free dma descriptors
+			/*  free dma descriptors */
 			if (priv(dev)->dma_desc)
 				pci_free_consistent(priv(dev)->hw_dev,
 					sizeof(struct plx_dma_desc) *
@@ -706,7 +702,7 @@ static int hpdi_detach(struct comedi_device * dev)
 	return 0;
 }
 
-static int dio_config_block_size(struct comedi_device * dev, unsigned int * data)
+static int dio_config_block_size(struct comedi_device *dev, unsigned int *data)
 {
 	unsigned int requested_block_size;
 	int retval;
@@ -722,8 +718,8 @@ static int dio_config_block_size(struct comedi_device * dev, unsigned int * data
 	return 2;
 }
 
-static int di_cmd_test(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int di_cmd_test(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	int tmp;
@@ -761,7 +757,7 @@ static int di_cmd_test(struct comedi_device * dev, struct comedi_subdevice * s,
 
 	/* step 2: make sure trigger sources are unique and mutually compatible */
 
-	// uniqueness check
+	/*  uniqueness check */
 	if (cmd->stop_src != TRIG_COUNT && cmd->stop_src != TRIG_NONE)
 		err++;
 
@@ -807,7 +803,7 @@ static int di_cmd_test(struct comedi_device * dev, struct comedi_subdevice * s,
 	if (cmd->chanlist) {
 		for (i = 1; i < cmd->chanlist_len; i++) {
 			if (CR_CHAN(cmd->chanlist[i]) != i) {
-				// XXX could support 8 channels or 16 channels
+				/*  XXX could support 8 channels or 16 channels */
 				comedi_error(dev,
 					"chanlist must be channels 0 to 31 in order");
 				err++;
@@ -822,8 +818,8 @@ static int di_cmd_test(struct comedi_device * dev, struct comedi_subdevice * s,
 	return 0;
 }
 
-static int hpdi_cmd_test(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int hpdi_cmd_test(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	if (priv(dev)->dio_config_output) {
 		return -EINVAL;
@@ -831,14 +827,14 @@ static int hpdi_cmd_test(struct comedi_device * dev, struct comedi_subdevice * s
 		return di_cmd_test(dev, s, cmd);
 }
 
-static inline void hpdi_writel(struct comedi_device * dev, uint32_t bits,
+static inline void hpdi_writel(struct comedi_device *dev, uint32_t bits,
 	unsigned int offset)
 {
 	writel(bits | priv(dev)->bits[offset / sizeof(uint32_t)],
 		priv(dev)->hpdi_iobase + offset);
 }
 
-static int di_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int di_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	uint32_t bits;
 	unsigned long flags;
@@ -860,28 +856,28 @@ static int di_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 	writel(0, priv(dev)->plx9080_iobase + PLX_DMA0_TRANSFER_SIZE_REG);
 	writel(0, priv(dev)->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG);
 	writel(0, priv(dev)->plx9080_iobase + PLX_DMA0_LOCAL_ADDRESS_REG);
-	// give location of first dma descriptor
+	/*  give location of first dma descriptor */
 	bits = priv(dev)->
 		dma_desc_phys_addr | PLX_DESC_IN_PCI_BIT | PLX_INTR_TERM_COUNT |
 		PLX_XFER_LOCAL_TO_PCI;
 	writel(bits, priv(dev)->plx9080_iobase + PLX_DMA0_DESCRIPTOR_REG);
 
-	// spinlock for plx dma control/status reg
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
-	// enable dma transfer
+	/*  spinlock for plx dma control/status reg */
+	spin_lock_irqsave(&dev->spinlock, flags);
+	/*  enable dma transfer */
 	writeb(PLX_DMA_EN_BIT | PLX_DMA_START_BIT | PLX_CLEAR_DMA_INTR_BIT,
 		priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG);
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
 	if (cmd->stop_src == TRIG_COUNT)
 		priv(dev)->dio_count = cmd->stop_arg;
 	else
 		priv(dev)->dio_count = 1;
 
-	// clear over/under run status flags
+	/*  clear over/under run status flags */
 	writel(RX_UNDERRUN_BIT | RX_OVERRUN_BIT,
 		priv(dev)->hpdi_iobase + BOARD_STATUS_REG);
-	// enable interrupts
+	/*  enable interrupts */
 	writel(intr_bit(RX_FULL_INTR),
 		priv(dev)->hpdi_iobase + INTERRUPT_CONTROL_REG);
 
@@ -891,7 +887,7 @@ static int di_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 	return 0;
 }
 
-static int hpdi_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int hpdi_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	if (priv(dev)->dio_config_output) {
 		return -EINVAL;
@@ -899,7 +895,7 @@ static int hpdi_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 		return di_cmd(dev, s);
 }
 
-static void drain_dma_buffers(struct comedi_device * dev, unsigned int channel)
+static void drain_dma_buffers(struct comedi_device *dev, unsigned int channel)
 {
 	struct comedi_async *async = dev->read_subdev->async;
 	uint32_t next_transfer_addr;
@@ -914,7 +910,7 @@ static void drain_dma_buffers(struct comedi_device * dev, unsigned int channel)
 		pci_addr_reg =
 			priv(dev)->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG;
 
-	// loop until we have read all the full buffers
+	/*  loop until we have read all the full buffers */
 	j = 0;
 	for (next_transfer_addr = readl(pci_addr_reg);
 		(next_transfer_addr <
@@ -925,7 +921,7 @@ static void drain_dma_buffers(struct comedi_device * dev, unsigned int channel)
 					dma_desc_index].pci_start_addr) +
 			priv(dev)->block_size)
 		&& j < priv(dev)->num_dma_descriptors; j++) {
-		// transfer data from dma buffer to comedi buffer
+		/*  transfer data from dma buffer to comedi buffer */
 		num_samples = priv(dev)->block_size / sizeof(uint32_t);
 		if (async->cmd.stop_src == TRIG_COUNT) {
 			if (num_samples > priv(dev)->dio_count)
@@ -942,10 +938,10 @@ static void drain_dma_buffers(struct comedi_device * dev, unsigned int channel)
 			priv(dev)->dma_desc[priv(dev)->dma_desc_index].next);
 		DEBUG_PRINT("pci addr reg 0x%x\n", next_transfer_addr);
 	}
-	// XXX check for buffer overrun somehow
+	/*  XXX check for buffer overrun somehow */
 }
 
-static irqreturn_t handle_interrupt(int irq, void *d PT_REGS_ARG)
+static irqreturn_t handle_interrupt(int irq, void *d)
 {
 	struct comedi_device *dev = d;
 	struct comedi_subdevice *s = dev->read_subdev;
@@ -975,10 +971,10 @@ static irqreturn_t handle_interrupt(int irq, void *d PT_REGS_ARG)
 		writel(hpdi_intr_status,
 			priv(dev)->hpdi_iobase + INTERRUPT_STATUS_REG);
 	}
-	// spin lock makes sure noone else changes plx dma control reg
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	/*  spin lock makes sure noone else changes plx dma control reg */
+	spin_lock_irqsave(&dev->spinlock, flags);
 	dma0_status = readb(priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG);
-	if (plx_status & ICS_DMA0_A) {	// dma chan 0 interrupt
+	if (plx_status & ICS_DMA0_A) {	/*  dma chan 0 interrupt */
 		writeb((dma0_status & PLX_DMA_EN_BIT) | PLX_CLEAR_DMA_INTR_BIT,
 			priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG);
 
@@ -988,23 +984,23 @@ static irqreturn_t handle_interrupt(int irq, void *d PT_REGS_ARG)
 		}
 		DEBUG_PRINT(" cleared dma ch0 interrupt\n");
 	}
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
-	// spin lock makes sure noone else changes plx dma control reg
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	/*  spin lock makes sure noone else changes plx dma control reg */
+	spin_lock_irqsave(&dev->spinlock, flags);
 	dma1_status = readb(priv(dev)->plx9080_iobase + PLX_DMA1_CS_REG);
-	if (plx_status & ICS_DMA1_A)	// XXX
-	{			// dma chan 1 interrupt
+	if (plx_status & ICS_DMA1_A)	/*  XXX */
+	{			/*  dma chan 1 interrupt */
 		writeb((dma1_status & PLX_DMA_EN_BIT) | PLX_CLEAR_DMA_INTR_BIT,
 			priv(dev)->plx9080_iobase + PLX_DMA1_CS_REG);
 		DEBUG_PRINT("dma1 status 0x%x\n", dma1_status);
 
 		DEBUG_PRINT(" cleared dma ch1 interrupt\n");
 	}
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
-	// clear possible plx9080 interrupt sources
-	if (plx_status & ICS_LDIA) {	// clear local doorbell interrupt
+	/*  clear possible plx9080 interrupt sources */
+	if (plx_status & ICS_LDIA) {	/*  clear local doorbell interrupt */
 		plx_bits = readl(priv(dev)->plx9080_iobase + PLX_DBR_OUT_REG);
 		writel(plx_bits, priv(dev)->plx9080_iobase + PLX_DBR_OUT_REG);
 		DEBUG_PRINT(" cleared local doorbell bits 0x%x\n", plx_bits);
@@ -1036,19 +1032,19 @@ static irqreturn_t handle_interrupt(int irq, void *d PT_REGS_ARG)
 	return IRQ_HANDLED;
 }
 
-void abort_dma(struct comedi_device * dev, unsigned int channel)
+void abort_dma(struct comedi_device *dev, unsigned int channel)
 {
 	unsigned long flags;
 
-	// spinlock for plx dma control/status reg
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	/*  spinlock for plx dma control/status reg */
+	spin_lock_irqsave(&dev->spinlock, flags);
 
 	plx9080_abort_dma(priv(dev)->plx9080_iobase, channel);
 
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 }
 
-static int hpdi_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int hpdi_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	hpdi_writel(dev, 0, BOARD_CONTROL_REG);
 
diff --git a/drivers/staging/comedi/drivers/icp_multi.c b/drivers/staging/comedi/drivers/icp_multi.c
index 15fce0190b2..984f995149b 100644
--- a/drivers/staging/comedi/drivers/icp_multi.c
+++ b/drivers/staging/comedi/drivers/icp_multi.c
@@ -50,6 +50,7 @@ Options:
  [1] - PCI slot number
 */
 
+#include <linux/interrupt.h>
 #include "../comedidev.h"
 
 #include <linux/delay.h>
@@ -282,7 +283,7 @@ static int icp_multi_insn_read_ai(struct comedi_device *dev, struct comedi_subde
 			readw(devpriv->io_addr + ICP_MULTI_ADC_CSR));
 #endif
 
-		comedi_udelay(1);
+		udelay(1);
 
 #ifdef ICP_MULTI_EXTDEBUG
 		printk("icp multi C n=%d ST=%4x\n", n,
@@ -304,7 +305,7 @@ static int icp_multi_insn_read_ai(struct comedi_device *dev, struct comedi_subde
 						ICP_MULTI_ADC_CSR));
 #endif
 
-			comedi_udelay(1);
+			udelay(1);
 		}
 
 		/*  If we reach here, a timeout has occurred */
@@ -411,7 +412,7 @@ static int icp_multi_insn_write_ao(struct comedi_device *dev, struct comedi_subd
 						ICP_MULTI_DAC_CSR));
 #endif
 
-			comedi_udelay(1);
+			udelay(1);
 		}
 
 		/*  If we reach here, a timeout has occurred */
@@ -618,7 +619,7 @@ static int icp_multi_insn_write_ctr(struct comedi_device *dev, struct comedi_sub
 
 ==============================================================================
 */
-static irqreturn_t interrupt_service_icp_multi(int irq, void *d PT_REGS_ARG)
+static irqreturn_t interrupt_service_icp_multi(int irq, void *d)
 {
 	struct comedi_device *dev = d;
 	int int_no;
@@ -842,7 +843,7 @@ static int icp_multi_reset(struct comedi_device *dev)
 				devpriv->io_addr + ICP_MULTI_DAC_CSR);
 
 			/*  Delay to allow DAC time to recover */
-			comedi_udelay(1);
+			udelay(1);
 		}
 	/*  Digital outputs to 0 */
 	writew(0, devpriv->io_addr + ICP_MULTI_DO);
@@ -954,7 +955,7 @@ static int icp_multi_attach(struct comedi_device *dev, struct comedi_devconfig *
 
 	if (this_board->have_irq) {
 		if (irq) {
-			if (comedi_request_irq(irq, interrupt_service_icp_multi,
+			if (request_irq(irq, interrupt_service_icp_multi,
 					IRQF_SHARED, "Inova Icp Multi", dev)) {
 				printk(", unable to allocate IRQ %u, DISABLING IT", irq);
 				irq = 0;	/* Can't use IRQ */
@@ -1072,7 +1073,7 @@ static int icp_multi_detach(struct comedi_device *dev)
 			icp_multi_reset(dev);
 
 	if (dev->irq)
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 
 	if (dev->private && devpriv->io_addr)
 		iounmap(devpriv->io_addr);
diff --git a/drivers/staging/comedi/drivers/icp_multi.h b/drivers/staging/comedi/drivers/icp_multi.h
index 21d84766fea..354ba8f14f8 100644
--- a/drivers/staging/comedi/drivers/icp_multi.h
+++ b/drivers/staging/comedi/drivers/icp_multi.h
@@ -168,14 +168,14 @@ static int pci_card_alloc(struct pcilst_struct *inova)
 	int i;
 
 	if (!inova) {
-		rt_printk(" - BUG!! inova is NULL!\n");
+		printk(" - BUG!! inova is NULL!\n");
 		return -1;
 	}
 
 	if (inova->used)
 		return 1;
 	if (comedi_pci_enable(inova->pcidev, "icp_multi")) {
-		rt_printk(" - Can't enable PCI device and request regions!\n");
+		printk(" - Can't enable PCI device and request regions!\n");
 		return -1;
 	}
 	/* Resources will be accurate now. */
@@ -248,19 +248,19 @@ static struct pcilst_struct *select_and_alloc_pci_card(unsigned short vendor_id,
 
 		card = find_free_pci_card_by_device(vendor_id, device_id);
 		if (card == NULL) {
-			rt_printk(" - Unused card not found in system!\n");
+			printk(" - Unused card not found in system!\n");
 			return NULL;
 		}
 	} else {
 		switch (find_free_pci_card_by_position(vendor_id, device_id,
 				pci_bus, pci_slot, &card)) {
 		case 1:
-			rt_printk
+			printk
 				(" - Card not found on requested position b:s %d:%d!\n",
 				pci_bus, pci_slot);
 			return NULL;
 		case 2:
-			rt_printk
+			printk
 				(" - Card on requested position is used b:s %d:%d!\n",
 				pci_bus, pci_slot);
 			return NULL;
@@ -270,7 +270,7 @@ static struct pcilst_struct *select_and_alloc_pci_card(unsigned short vendor_id,
 	err = pci_card_alloc(card);
 	if (err != 0) {
 		if (err > 0)
-			rt_printk(" - Can't allocate card!\n");
+			printk(" - Can't allocate card!\n");
 		/* else: error already printed. */
 		return NULL;
 	}
diff --git a/drivers/staging/comedi/drivers/ii_pci20kc.c b/drivers/staging/comedi/drivers/ii_pci20kc.c
index 80825ba2541..a90d65fde31 100644
--- a/drivers/staging/comedi/drivers/ii_pci20kc.c
+++ b/drivers/staging/comedi/drivers/ii_pci20kc.c
@@ -158,21 +158,21 @@ struct pci20xxx_private {
 #define devpriv ((struct pci20xxx_private *)dev->private)
 #define CHAN (CR_CHAN(it->chanlist[0]))
 
-static int pci20xxx_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int pci20xxx_detach(struct comedi_device * dev);
+static int pci20xxx_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int pci20xxx_detach(struct comedi_device *dev);
 
 static struct comedi_driver driver_pci20xxx = {
-      driver_name:"ii_pci20kc",
-      module:THIS_MODULE,
-      attach:pci20xxx_attach,
-      detach:pci20xxx_detach,
+	.driver_name = "ii_pci20kc",
+	.module = THIS_MODULE,
+	.attach = pci20xxx_attach,
+	.detach = pci20xxx_detach,
 };
 
-static int pci20006_init(struct comedi_device * dev, struct comedi_subdevice * s,
+static int pci20006_init(struct comedi_device *dev, struct comedi_subdevice *s,
 	int opt0, int opt1);
-static int pci20341_init(struct comedi_device * dev, struct comedi_subdevice * s,
+static int pci20341_init(struct comedi_device *dev, struct comedi_subdevice *s,
 	int opt0, int opt1);
-static int pci20xxx_dio_init(struct comedi_device * dev, struct comedi_subdevice * s);
+static int pci20xxx_dio_init(struct comedi_device *dev, struct comedi_subdevice *s);
 
 /*
   options[0]	Board base address
@@ -201,7 +201,7 @@ static int pci20xxx_dio_init(struct comedi_device * dev, struct comedi_subdevice
 		1 == unipolar 10V  (0V -- +10V)
 		2 == bipolar 5V  (-5V -- +5V)
 */
-static int pci20xxx_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int pci20xxx_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	unsigned char i;
 	int ret;
@@ -209,9 +209,12 @@ static int pci20xxx_attach(struct comedi_device * dev, struct comedi_devconfig *
 	struct comedi_subdevice *s;
 	union pci20xxx_subdev_private *sdp;
 
-	if ((ret = alloc_subdevices(dev, 1 + PCI20000_MODULES)) < 0)
+	ret = alloc_subdevices(dev, 1 + PCI20000_MODULES);
+	if (ret < 0)
 		return ret;
-	if ((ret = alloc_private(dev, sizeof(struct pci20xxx_private))) < 0)
+
+	ret = alloc_private(dev, sizeof(struct pci20xxx_private));
+	if (ret < 0)
 		return ret;
 
 	devpriv->ioaddr = (void *)(unsigned long)it->options[0];
@@ -263,7 +266,7 @@ static int pci20xxx_attach(struct comedi_device * dev, struct comedi_devconfig *
 	return 1;
 }
 
-static int pci20xxx_detach(struct comedi_device * dev)
+static int pci20xxx_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: pci20xxx: remove\n", dev->minor);
 
@@ -272,10 +275,10 @@ static int pci20xxx_detach(struct comedi_device * dev)
 
 /* pci20006m */
 
-static int pci20006_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int pci20006_insn_write(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int pci20006_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int pci20006_insn_write(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
 static const struct comedi_lrange *pci20006_range_list[] = {
 	&range_bipolar10,
@@ -283,7 +286,7 @@ static const struct comedi_lrange *pci20006_range_list[] = {
 	&range_bipolar5,
 };
 
-static int pci20006_init(struct comedi_device * dev, struct comedi_subdevice * s,
+static int pci20006_init(struct comedi_device *dev, struct comedi_subdevice *s,
 	int opt0, int opt1)
 {
 	union pci20xxx_subdev_private *sdp = s->private;
@@ -308,8 +311,8 @@ static int pci20006_init(struct comedi_device * dev, struct comedi_subdevice * s
 	return 0;
 }
 
-static int pci20006_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci20006_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	union pci20xxx_subdev_private *sdp = s->private;
 
@@ -318,8 +321,8 @@ static int pci20006_insn_read(struct comedi_device * dev, struct comedi_subdevic
 	return 1;
 }
 
-static int pci20006_insn_write(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci20006_insn_write(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	union pci20xxx_subdev_private *sdp = s->private;
 	int hi, lo;
@@ -351,8 +354,8 @@ static int pci20006_insn_write(struct comedi_device * dev, struct comedi_subdevi
 
 /* PCI20341M */
 
-static int pci20341_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int pci20341_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
 static const int pci20341_timebase[] = { 0x00, 0x00, 0x00, 0x04 };
 static const int pci20341_settling_time[] = { 0x58, 0x58, 0x93, 0x99 };
@@ -368,7 +371,7 @@ static const struct comedi_lrange *const pci20341_ranges[] = {
 	&range_bipolar0_025,
 };
 
-static int pci20341_init(struct comedi_device * dev, struct comedi_subdevice * s,
+static int pci20341_init(struct comedi_device *dev, struct comedi_subdevice *s,
 	int opt0, int opt1)
 {
 	union pci20xxx_subdev_private *sdp = s->private;
@@ -399,8 +402,8 @@ static int pci20341_init(struct comedi_device * dev, struct comedi_subdevice * s
 	return 0;
 }
 
-static int pci20341_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci20341_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
         union pci20xxx_subdev_private *sdp = s->private;
 	unsigned int i = 0, j = 0;
@@ -445,14 +448,14 @@ static int pci20341_insn_read(struct comedi_device * dev, struct comedi_subdevic
 
 /* native DIO */
 
-static void pci20xxx_dio_config(struct comedi_device * dev, struct comedi_subdevice * s);
-static int pci20xxx_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int pci20xxx_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static void pci20xxx_dio_config(struct comedi_device *dev, struct comedi_subdevice *s);
+static int pci20xxx_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int pci20xxx_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
 /* initialize struct pci20xxx_private */
-static int pci20xxx_dio_init(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pci20xxx_dio_init(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 
 	s->type = COMEDI_SUBD_DIO;
@@ -471,8 +474,8 @@ static int pci20xxx_dio_init(struct comedi_device * dev, struct comedi_subdevice
 	return 0;
 }
 
-static int pci20xxx_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci20xxx_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int mask, bits;
 
@@ -496,8 +499,8 @@ static int pci20xxx_dio_insn_config(struct comedi_device * dev, struct comedi_su
 	return 1;
 }
 
-static int pci20xxx_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pci20xxx_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int mask = data[0];
 
@@ -526,7 +529,7 @@ static int pci20xxx_dio_insn_bits(struct comedi_device * dev, struct comedi_subd
 	return 2;
 }
 
-static void pci20xxx_dio_config(struct comedi_device * dev, struct comedi_subdevice * s)
+static void pci20xxx_dio_config(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	unsigned char control_01;
 	unsigned char control_23;
@@ -582,7 +585,7 @@ static void pci20xxx_dio_config(struct comedi_device * dev, struct comedi_subdev
 }
 
 #if 0
-static void pci20xxx_do(struct comedi_device * dev, struct comedi_subdevice * s)
+static void pci20xxx_do(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	/* XXX if the channel is configured for input, does this
 	   do bad things? */
@@ -595,7 +598,7 @@ static void pci20xxx_do(struct comedi_device * dev, struct comedi_subdevice * s)
 	writeb((s->state >> 24) & 0xff, devpriv->ioaddr + PCI20000_DIO_3);
 }
 
-static unsigned int pci20xxx_di(struct comedi_device * dev, struct comedi_subdevice * s)
+static unsigned int pci20xxx_di(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	/* XXX same note as above */
 	unsigned int bits;
diff --git a/drivers/staging/comedi/drivers/jr3_pci.c b/drivers/staging/comedi/drivers/jr3_pci.c
index a3c887f3b2c..baf83c6a941 100644
--- a/drivers/staging/comedi/drivers/jr3_pci.c
+++ b/drivers/staging/comedi/drivers/jr3_pci.c
@@ -48,69 +48,20 @@ Devices: [JR3] PCI force sensor board (jr3_pci)
 #include "comedi_pci.h"
 #include "jr3_pci.h"
 
-/* Hotplug firmware loading stuff */
-
-static void comedi_fw_release(struct device *dev)
-{
-	printk(KERN_DEBUG "firmware_sample_driver: ghost_release\n");
-}
-
-static struct device comedi_fw_device = {
-	.init_name = "comedi",
-	.release = comedi_fw_release
-};
-
-typedef int comedi_firmware_callback(struct comedi_device * dev,
-	const u8 * data, size_t size);
-
-static int comedi_load_firmware(struct comedi_device * dev,
-	char *name, comedi_firmware_callback cb)
-{
-	int result = 0;
-	const struct firmware *fw;
-	char *firmware_path;
-	static const char *prefix = "comedi/";
-
-	firmware_path = kmalloc(strlen(prefix) + strlen(name) + 1, GFP_KERNEL);
-	if (!firmware_path) {
-		result = -ENOMEM;
-	} else {
-		firmware_path[0] = '\0';
-		strcat(firmware_path, prefix);
-		strcat(firmware_path, name);
-		result = device_register(&comedi_fw_device);
-		if (result == 0) {
-			result = request_firmware(&fw, firmware_path,
-				&comedi_fw_device);
-			if (result == 0) {
-				if (!cb) {
-					result = -EINVAL;
-				} else {
-					result = cb(dev, fw->data, fw->size);
-				}
-				release_firmware(fw);
-			}
-			device_unregister(&comedi_fw_device);
-		}
-		kfree(firmware_path);
-	}
-	return result;
-}
-
 #define PCI_VENDOR_ID_JR3 0x1762
 #define PCI_DEVICE_ID_JR3_1_CHANNEL 0x3111
 #define PCI_DEVICE_ID_JR3_2_CHANNEL 0x3112
 #define PCI_DEVICE_ID_JR3_3_CHANNEL 0x3113
 #define PCI_DEVICE_ID_JR3_4_CHANNEL 0x3114
 
-static int jr3_pci_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int jr3_pci_detach(struct comedi_device * dev);
+static int jr3_pci_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int jr3_pci_detach(struct comedi_device *dev);
 
 static struct comedi_driver driver_jr3_pci = {
-      driver_name:"jr3_pci",
-      module:THIS_MODULE,
-      attach:jr3_pci_attach,
-      detach:jr3_pci_detach,
+	.driver_name = "jr3_pci",
+	.module = THIS_MODULE,
+	.attach = jr3_pci_attach,
+	.detach = jr3_pci_detach,
 };
 
 static DEFINE_PCI_DEVICE_TABLE(jr3_pci_pci_table) = {
@@ -168,6 +119,41 @@ struct jr3_pci_subdev_private {
 	int retries;
 };
 
+/* Hotplug firmware loading stuff */
+
+typedef int comedi_firmware_callback(struct comedi_device *dev,
+				     const u8 *data, size_t size);
+
+static int comedi_load_firmware(struct comedi_device *dev, char *name,
+				comedi_firmware_callback cb)
+{
+	int result = 0;
+	const struct firmware *fw;
+	char *firmware_path;
+	static const char *prefix = "comedi/";
+	struct jr3_pci_dev_private *devpriv = dev->private;
+
+	firmware_path = kmalloc(strlen(prefix) + strlen(name) + 1, GFP_KERNEL);
+	if (!firmware_path) {
+		result = -ENOMEM;
+	} else {
+		firmware_path[0] = '\0';
+		strcat(firmware_path, prefix);
+		strcat(firmware_path, name);
+		result = request_firmware(&fw, firmware_path,
+			&devpriv->pci_dev->dev);
+		if (result == 0) {
+			if (!cb)
+				result = -EINVAL;
+			else
+				result = cb(dev, fw->data, fw->size);
+			release_firmware(fw);
+		}
+		kfree(firmware_path);
+	}
+	return result;
+}
+
 static struct poll_delay_t poll_delay_min_max(int min, int max)
 {
 	struct poll_delay_t result;
@@ -194,15 +180,15 @@ static void set_transforms(volatile struct jr3_channel *channel,
 {
 	int i;
 
-	num &= 0x000f;		// Make sure that 0 <= num <= 15
+	num &= 0x000f;		/*  Make sure that 0 <= num <= 15 */
 	for (i = 0; i < 8; i++) {
 
 		set_u16(&channel->transforms[num].link[i].link_type,
 			transf.link[i].link_type);
-		comedi_udelay(1);
+		udelay(1);
 		set_s16(&channel->transforms[num].link[i].link_amount,
 			transf.link[i].link_amount);
-		comedi_udelay(1);
+		udelay(1);
 		if (transf.link[i].link_type == end_x_form) {
 			break;
 		}
@@ -273,8 +259,8 @@ static struct six_axis_t get_max_full_scales(volatile struct jr3_channel *channe
 	return result;
 }
 
-static int jr3_pci_ai_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int jr3_pci_ai_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int result;
 	struct jr3_pci_subdev_private *p;
@@ -389,7 +375,7 @@ static int jr3_pci_ai_insn_read(struct comedi_device * dev, struct comedi_subdev
 	return result;
 }
 
-static void jr3_pci_open(struct comedi_device * dev)
+static void jr3_pci_open(struct comedi_device *dev)
 {
 	int i;
 	struct jr3_pci_dev_private *devpriv = dev->private;
@@ -406,14 +392,14 @@ static void jr3_pci_open(struct comedi_device * dev)
 	}
 }
 
-int read_idm_word(const u8 * data, size_t size, int *pos, unsigned int *val)
+int read_idm_word(const u8 *data, size_t size, int *pos, unsigned int *val)
 {
 	int result = 0;
 	if (pos != 0 && val != 0) {
-		// Skip over non hex
+		/*  Skip over non hex */
 		for (; *pos < size && !isxdigit(data[*pos]); (*pos)++) {
 		}
-		// Collect value
+		/*  Collect value */
 		*val = 0;
 		for (; *pos < size && isxdigit(data[*pos]); (*pos)++) {
 			char ch = tolower(data[*pos]);
@@ -428,7 +414,7 @@ int read_idm_word(const u8 * data, size_t size, int *pos, unsigned int *val)
 	return result;
 }
 
-static int jr3_download_firmware(struct comedi_device * dev, const u8 * data,
+static int jr3_download_firmware(struct comedi_device *dev, const u8 *data,
 	size_t size)
 {
 	/*
@@ -485,17 +471,17 @@ static int jr3_download_firmware(struct comedi_device * dev, const u8 * data,
 					count, addr);
 				while (more && count > 0) {
 					if (addr & 0x4000) {
-						// 16 bit data, never seen in real life!!
+						/*  16 bit data, never seen in real life!! */
 						unsigned int data1;
 
 						more = more
 							&& read_idm_word(data,
 							size, &pos, &data1);
 						count--;
-						// printk("jr3_data, not tested\n");
-						//        jr3[addr + 0x20000 * pnum] = data1;
+						/* printk("jr3_data, not tested\n"); */
+						/* jr3[addr + 0x20000 * pnum] = data1; */
 					} else {
-						//  Download 24 bit program
+						/*   Download 24 bit program */
 						unsigned int data1, data2;
 
 						more = more
@@ -510,12 +496,12 @@ static int jr3_download_firmware(struct comedi_device * dev, const u8 * data,
 								channel[i].
 								program_low
 								[addr], data1);
-							comedi_udelay(1);
+							udelay(1);
 							set_u16(&p->iobase->
 								channel[i].
 								program_high
 								[addr], data2);
-							comedi_udelay(1);
+							udelay(1);
 
 						}
 					}
@@ -527,7 +513,7 @@ static int jr3_download_firmware(struct comedi_device * dev, const u8 * data,
 	return result;
 }
 
-static struct poll_delay_t jr3_pci_poll_subdevice(struct comedi_subdevice * s)
+static struct poll_delay_t jr3_pci_poll_subdevice(struct comedi_subdevice *s)
 {
 	struct poll_delay_t result = poll_delay_min_max(1000, 2000);
 	struct jr3_pci_subdev_private *p = s->private;
@@ -541,7 +527,7 @@ static struct poll_delay_t jr3_pci_poll_subdevice(struct comedi_subdevice * s)
 			p->errors = errors;
 		}
 		if (errors & (watch_dog | watch_dog2 | sensor_change)) {
-			// Sensor communication lost, force poll mode
+			/*  Sensor communication lost, force poll mode */
 			p->state = state_jr3_poll;
 
 		}
@@ -551,9 +537,10 @@ static struct poll_delay_t jr3_pci_poll_subdevice(struct comedi_subdevice * s)
 				u16 serial_no = get_u16(&channel->serial_no);
 				if ((errors & (watch_dog | watch_dog2)) ||
 					model_no == 0 || serial_no == 0) {
-					// Still no sensor, keep on polling. Since it takes up to
-					// 10 seconds for offsets to stabilize, polling each
-					// second should suffice.
+/*
+ * Still no sensor, keep on polling. Since it takes up to 10 seconds
+ * for offsets to stabilize, polling each second should suffice.
+ */
 					result = poll_delay_min_max(1000, 2000);
 				} else {
 					p->retries = 0;
@@ -566,7 +553,7 @@ static struct poll_delay_t jr3_pci_poll_subdevice(struct comedi_subdevice * s)
 		case state_jr3_init_wait_for_offset:{
 				p->retries++;
 				if (p->retries < 10) {
-					// Wait for offeset to stabilize (< 10 s according to manual)
+					/*  Wait for offeset to stabilize (< 10 s according to manual) */
 					result = poll_delay_min_max(1000, 2000);
 				} else {
 					struct transform_t transf;
@@ -582,7 +569,7 @@ static struct poll_delay_t jr3_pci_poll_subdevice(struct comedi_subdevice * s)
 					printk("Sensor Serial    = %i\n",
 						p->serial_no);
 
-					// Transformation all zeros
+					/*  Transformation all zeros */
 					transf.link[0].link_type =
 						(enum link_types)0;
 					transf.link[0].link_amount = 0;
@@ -600,7 +587,7 @@ static struct poll_delay_t jr3_pci_poll_subdevice(struct comedi_subdevice * s)
 					use_transform(channel, 0);
 					p->state =
 						state_jr3_init_transform_complete;
-					result = poll_delay_min_max(20, 100);	// Allow 20 ms for completion
+					result = poll_delay_min_max(20, 100);	/*  Allow 20 ms for completion */
 				}
 			} break;
 		case state_jr3_init_transform_complete:{
@@ -608,7 +595,7 @@ static struct poll_delay_t jr3_pci_poll_subdevice(struct comedi_subdevice * s)
 					printk("state_jr3_init_transform_complete complete = %d\n", is_complete(channel));
 					result = poll_delay_min_max(20, 100);
 				} else {
-					// Set full scale
+					/*  Set full scale */
 					struct six_axis_t min_full_scale;
 					struct six_axis_t max_full_scale;
 
@@ -639,7 +626,7 @@ static struct poll_delay_t jr3_pci_poll_subdevice(struct comedi_subdevice * s)
 
 					p->state =
 						state_jr3_init_set_full_scale_complete;
-					result = poll_delay_min_max(20, 100);	// Allow 20 ms for completion
+					result = poll_delay_min_max(20, 100);	/*  Allow 20 ms for completion */
 				}
 			}
 			break;
@@ -650,7 +637,7 @@ static struct poll_delay_t jr3_pci_poll_subdevice(struct comedi_subdevice * s)
 				} else {
 					volatile struct force_array *full_scale;
 
-					// Use ranges in kN or we will overflow arount 2000N!
+					/*  Use ranges in kN or we will overflow arount 2000N! */
 					full_scale = &channel->full_scale;
 					p->range[0].range.min =
 						-get_s16(&full_scale->fx) *
@@ -679,10 +666,10 @@ static struct poll_delay_t jr3_pci_poll_subdevice(struct comedi_subdevice * s)
 						-get_s16(&full_scale->mz) * 100;
 					p->range[5].range.max =
 						get_s16(&full_scale->mz) * 100;
-					p->range[6].range.min = -get_s16(&full_scale->v1) * 100;	// ??
-					p->range[6].range.max = get_s16(&full_scale->v1) * 100;	// ??
-					p->range[7].range.min = -get_s16(&full_scale->v2) * 100;	// ??
-					p->range[7].range.max = get_s16(&full_scale->v2) * 100;	// ??
+					p->range[6].range.min = -get_s16(&full_scale->v1) * 100;	/*  ?? */
+					p->range[6].range.max = get_s16(&full_scale->v1) * 100;	/*  ?? */
+					p->range[7].range.min = -get_s16(&full_scale->v2) * 100;	/*  ?? */
+					p->range[7].range.max = get_s16(&full_scale->v2) * 100;	/*  ?? */
 					p->range[8].range.min = 0;
 					p->range[8].range.max = 65535;
 
@@ -701,7 +688,7 @@ static struct poll_delay_t jr3_pci_poll_subdevice(struct comedi_subdevice * s)
 					use_offset(channel, 0);
 					p->state =
 						state_jr3_init_use_offset_complete;
-					result = poll_delay_min_max(40, 100);	// Allow 40 ms for completion
+					result = poll_delay_min_max(40, 100);	/*  Allow 40 ms for completion */
 				}
 			}
 			break;
@@ -747,10 +734,10 @@ static void jr3_pci_poll_dev(unsigned long data)
 	int delay;
 	int i;
 
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	spin_lock_irqsave(&dev->spinlock, flags);
 	delay = 1000;
 	now = jiffies;
-	// Poll all channels that are ready to be polled
+	/*  Poll all channels that are ready to be polled */
 	for (i = 0; i < devpriv->n_channels; i++) {
 		struct jr3_pci_subdev_private *subdevpriv = dev->subdevices[i].private;
 		if (now > subdevpriv->next_time_min) {
@@ -762,19 +749,21 @@ static void jr3_pci_poll_dev(unsigned long data)
 			subdevpriv->next_time_max =
 				jiffies + msecs_to_jiffies(sub_delay.max);
 			if (sub_delay.max && sub_delay.max < delay) {
-				// Wake up as late as possible -> poll as many channels as
-				// possible at once
+/*
+* Wake up as late as possible -> poll as many channels as possible
+* at once
+*/
 				delay = sub_delay.max;
 			}
 		}
 	}
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
 	devpriv->timer.expires = jiffies + msecs_to_jiffies(delay);
 	add_timer(&devpriv->timer);
 }
 
-static int jr3_pci_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int jr3_pci_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int result = 0;
 	struct pci_dev *card = NULL;
@@ -845,9 +834,12 @@ static int jr3_pci_attach(struct comedi_device * dev, struct comedi_devconfig *
 		devpriv->pci_dev = card;
 		dev->board_name = "jr3_pci";
 	}
-	if ((result = comedi_pci_enable(card, "jr3_pci")) < 0) {
+
+	result = comedi_pci_enable(card, "jr3_pci");
+	if (result < 0) {
 		return -EIO;
 	}
+
 	devpriv->pci_enabled = 1;
 	devpriv->iobase = ioremap(pci_resource_start(card, 0), sizeof(struct jr3_t));
 	result = alloc_subdevices(dev, devpriv->n_channels);
@@ -881,7 +873,7 @@ static int jr3_pci_attach(struct comedi_device * dev, struct comedi_devconfig *
 				p->range[j].range.max = 1000000;
 				for (k = 0; k < 7; k++) {
 					p->range_table_list[j + k * 8] =
-						(struct comedi_lrange *) & p->range[j];
+						(struct comedi_lrange *) &p->range[j];
 					p->maxdata_list[j + k * 8] = 0x7fff;
 				}
 			}
@@ -890,12 +882,12 @@ static int jr3_pci_attach(struct comedi_device * dev, struct comedi_devconfig *
 			p->range[8].range.max = 65536;
 
 			p->range_table_list[56] =
-				(struct comedi_lrange *) & p->range[8];
+				(struct comedi_lrange *) &p->range[8];
 			p->range_table_list[57] =
-				(struct comedi_lrange *) & p->range[8];
+				(struct comedi_lrange *) &p->range[8];
 			p->maxdata_list[56] = 0xffff;
 			p->maxdata_list[57] = 0xffff;
-			// Channel specific range and maxdata
+			/*  Channel specific range and maxdata */
 			dev->subdevices[i].range_table = 0;
 			dev->subdevices[i].range_table_list =
 				p->range_table_list;
@@ -904,7 +896,7 @@ static int jr3_pci_attach(struct comedi_device * dev, struct comedi_devconfig *
 		}
 	}
 
-	// Reset DSP card
+	/*  Reset DSP card */
 	devpriv->iobase->channel[0].reset = 0;
 
 	result = comedi_load_firmware(dev, "jr3pci.idm", jr3_download_firmware);
@@ -913,13 +905,18 @@ static int jr3_pci_attach(struct comedi_device * dev, struct comedi_devconfig *
 	if (result < 0) {
 		goto out;
 	}
-	// TODO: use firmware to load preferred offset tables. Suggested format:
-	// model serial Fx Fy Fz Mx My Mz\n
-	//
-	// comedi_load_firmware(dev, "jr3_offsets_table", jr3_download_firmware);
+/*
+ * TODO: use firmware to load preferred offset tables. Suggested
+ * format:
+ *     model serial Fx Fy Fz Mx My Mz\n
+ *
+ *     comedi_load_firmware(dev, "jr3_offsets_table", jr3_download_firmware);
+ */
 
-	// It takes a few milliseconds for software to settle
-	// as much as we can read firmware version
+/*
+ * It takes a few milliseconds for software to settle as much as we
+ * can read firmware version
+ */
 	msleep_interruptible(25);
 	for (i = 0; i < 0x18; i++) {
 		printk("%c",
@@ -927,7 +924,7 @@ static int jr3_pci_attach(struct comedi_device * dev, struct comedi_devconfig *
 				copyright[i]) >> 8);
 	}
 
-	// Start card timer
+	/*  Start card timer */
 	for (i = 0; i < devpriv->n_channels; i++) {
 		struct jr3_pci_subdev_private *p = dev->subdevices[i].private;
 
@@ -944,7 +941,7 @@ static int jr3_pci_attach(struct comedi_device * dev, struct comedi_devconfig *
 	return result;
 }
 
-static int jr3_pci_detach(struct comedi_device * dev)
+static int jr3_pci_detach(struct comedi_device *dev)
 {
 	int i;
 	struct jr3_pci_dev_private *devpriv = dev->private;
diff --git a/drivers/staging/comedi/drivers/jr3_pci.h b/drivers/staging/comedi/drivers/jr3_pci.h
index 3585f2941bc..4f4bfb24c6d 100644
--- a/drivers/staging/comedi/drivers/jr3_pci.h
+++ b/drivers/staging/comedi/drivers/jr3_pci.h
@@ -2,22 +2,22 @@
  * is 16 bits, but aligned on a 32 bit PCI boundary
  */
 
-static inline u16 get_u16(volatile const u32 * p)
+static inline u16 get_u16(volatile const u32 *p)
 {
 	return (u16) readl(p);
 }
 
-static inline void set_u16(volatile u32 * p, u16 val)
+static inline void set_u16(volatile u32 *p, u16 val)
 {
 	writel(val, p);
 }
 
-static inline s16 get_s16(volatile const s32 * p)
+static inline s16 get_s16(volatile const s32 *p)
 {
 	return (s16) readl(p);
 }
 
-static inline void set_s16(volatile s32 * p, s16 val)
+static inline void set_s16(volatile s32 *p, s16 val)
 {
 	writel(val, p);
 }
diff --git a/drivers/staging/comedi/drivers/ke_counter.c b/drivers/staging/comedi/drivers/ke_counter.c
index 79f6fe5646c..b49aed5c4a0 100644
--- a/drivers/staging/comedi/drivers/ke_counter.c
+++ b/drivers/staging/comedi/drivers/ke_counter.c
@@ -48,8 +48,8 @@ Kolter Electronic PCI Counter Card.
 
 /*-- function prototypes ----------------------------------------------------*/
 
-static int cnt_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int cnt_detach(struct comedi_device * dev);
+static int cnt_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int cnt_detach(struct comedi_device *dev);
 
 static DEFINE_PCI_DEVICE_TABLE(cnt_pci_table) = {
 	{PCI_VENDOR_ID_KOLTER, CNT_CARD_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
@@ -72,10 +72,10 @@ struct cnt_board_struct {
 
 static const struct cnt_board_struct cnt_boards[] = {
 	{
-	      name:	CNT_DRIVER_NAME,
-	      device_id:CNT_CARD_DEVICE_ID,
-	      cnt_channel_nbr:3,
-      cnt_bits:24}
+	.name = CNT_DRIVER_NAME,
+	.device_id = CNT_CARD_DEVICE_ID,
+	.cnt_channel_nbr = 3,
+	.cnt_bits = 24}
 };
 
 #define cnt_board_nbr (sizeof(cnt_boards)/sizeof(struct cnt_board_struct))
@@ -91,10 +91,10 @@ struct cnt_device_private {
 #define devpriv ((struct cnt_device_private *)dev->private)
 
 static struct comedi_driver cnt_driver = {
-      driver_name:CNT_DRIVER_NAME,
-      module:THIS_MODULE,
-      attach:cnt_attach,
-      detach:cnt_detach,
+	.driver_name = CNT_DRIVER_NAME,
+	.module = THIS_MODULE,
+	.attach = cnt_attach,
+	.detach = cnt_detach,
 };
 
 COMEDI_PCI_INITCLEANUP(cnt_driver, cnt_pci_table);
@@ -103,8 +103,8 @@ COMEDI_PCI_INITCLEANUP(cnt_driver, cnt_pci_table);
 
 /* This should be used only for resetting the counters; maybe it is better
    to make a special command 'reset'. */
-static int cnt_winsn(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+static int cnt_winsn(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 	int chan = CR_CHAN(insn->chanspec);
 
@@ -123,8 +123,8 @@ static int cnt_winsn(struct comedi_device * dev,
 
 /*-- counter read -----------------------------------------------------------*/
 
-static int cnt_rinsn(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+static int cnt_rinsn(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned char a0, a1, a2, a3, a4;
 	int chan = CR_CHAN(insn->chanspec);
@@ -148,7 +148,7 @@ static int cnt_rinsn(struct comedi_device * dev,
 
 /*-- attach -----------------------------------------------------------------*/
 
-static int cnt_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int cnt_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *subdevice;
 	struct pci_dev *pci_device;
@@ -157,9 +157,9 @@ static int cnt_attach(struct comedi_device * dev, struct comedi_devconfig * it)
 	int error, i;
 
 	/* allocate device private structure */
-	if ((error = alloc_private(dev, sizeof(struct cnt_device_private))) < 0) {
+	error = alloc_private(dev, sizeof(struct cnt_device_private));
+	if (error < 0)
 		return error;
-	}
 
 	/* Probe the device to determine what device in the series it is. */
 	for (pci_device = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
@@ -203,7 +203,8 @@ static int cnt_attach(struct comedi_device * dev, struct comedi_devconfig * it)
 	dev->board_name = board->name;
 
 	/* enable PCI device and request regions */
-	if ((error = comedi_pci_enable(pci_device, CNT_DRIVER_NAME)) < 0) {
+	error = comedi_pci_enable(pci_device, CNT_DRIVER_NAME);
+	if (error < 0) {
 		printk("comedi%d: failed to enable PCI device and request regions!\n", dev->minor);
 		return error;
 	}
@@ -213,9 +214,9 @@ static int cnt_attach(struct comedi_device * dev, struct comedi_devconfig * it)
 	dev->iobase = io_base;
 
 	/* allocate the subdevice structures */
-	if ((error = alloc_subdevices(dev, 1)) < 0) {
+	error = alloc_subdevices(dev, 1);
+	if (error < 0)
 		return error;
-	}
 
 	subdevice = dev->subdevices + 0;
 	dev->read_subdev = subdevice;
@@ -227,10 +228,10 @@ static int cnt_attach(struct comedi_device * dev, struct comedi_devconfig * it)
 	subdevice->insn_read = cnt_rinsn;
 	subdevice->insn_write = cnt_winsn;
 
-	// select 20MHz clock
+	/*  select 20MHz clock */
 	outb(3, dev->iobase + 248);
 
-	// reset all counters
+	/*  reset all counters */
 	outb(0, dev->iobase);
 	outb(0, dev->iobase + 0x20);
 	outb(0, dev->iobase + 0x40);
@@ -241,7 +242,7 @@ static int cnt_attach(struct comedi_device * dev, struct comedi_devconfig * it)
 
 /*-- detach -----------------------------------------------------------------*/
 
-static int cnt_detach(struct comedi_device * dev)
+static int cnt_detach(struct comedi_device *dev)
 {
 	if (devpriv && devpriv->pcidev) {
 		if (dev->iobase) {
diff --git a/drivers/staging/comedi/drivers/me4000.c b/drivers/staging/comedi/drivers/me4000.c
index 12481a032b9..23684587173 100644
--- a/drivers/staging/comedi/drivers/me4000.c
+++ b/drivers/staging/comedi/drivers/me4000.c
@@ -51,6 +51,7 @@ broken.
 
  */
 
+#include <linux/interrupt.h>
 #include "../comedidev.h"
 
 #include <linux/delay.h>
@@ -113,7 +114,7 @@ static const struct me4000_board me4000_boards[] = {
 	{0},
 };
 
-#define ME4000_BOARD_VERSIONS (sizeof(me4000_boards) / sizeof(struct me4000_board) - 1)
+#define ME4000_BOARD_VERSIONS (ARRAY_SIZE(me4000_boards) - 1)
 
 /*-----------------------------------------------------------------------------
   Comedi function prototypes
@@ -183,7 +184,7 @@ static int ai_prepare(struct comedi_device *dev,
 static int ai_write_chanlist(struct comedi_device *dev,
 	struct comedi_subdevice *s, struct comedi_cmd *cmd);
 
-static irqreturn_t me4000_ai_isr(int irq, void *dev_id PT_REGS_ARG);
+static irqreturn_t me4000_ai_isr(int irq, void *dev_id);
 
 static int me4000_ai_do_cmd_test(struct comedi_device *dev,
 	struct comedi_subdevice *s, struct comedi_cmd *cmd);
@@ -283,7 +284,7 @@ static int me4000_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		s->insn_read = me4000_ai_insn_read;
 
 		if (info->irq > 0) {
-			if (comedi_request_irq(info->irq, me4000_ai_isr,
+			if (request_irq(info->irq, me4000_ai_isr,
 					IRQF_SHARED, "ME-4000", dev)) {
 				printk("comedi%d: me4000: me4000_attach(): Unable to allocate irq\n", dev->minor);
 			} else {
@@ -1740,7 +1741,7 @@ static int me4000_ai_do_cmd_test(struct comedi_device *dev,
 	return 0;
 }
 
-static irqreturn_t me4000_ai_isr(int irq, void *dev_id PT_REGS_ARG)
+static irqreturn_t me4000_ai_isr(int irq, void *dev_id)
 {
 	unsigned int tmp;
 	struct comedi_device *dev = dev_id;
diff --git a/drivers/staging/comedi/drivers/me_daq.c b/drivers/staging/comedi/drivers/me_daq.c
index 0f023d009e6..f21cecaa2e0 100644
--- a/drivers/staging/comedi/drivers/me_daq.c
+++ b/drivers/staging/comedi/drivers/me_daq.c
@@ -50,6 +50,7 @@ from http://www.comedi.org
 
 */
 
+#include <linux/interrupt.h>
 #include "../comedidev.h"
 
 #include "comedi_pci.h"
diff --git a/drivers/staging/comedi/drivers/mite.c b/drivers/staging/comedi/drivers/mite.c
index ae901774453..22a4029c30b 100644
--- a/drivers/staging/comedi/drivers/mite.c
+++ b/drivers/staging/comedi/drivers/mite.c
@@ -258,7 +258,7 @@ struct mite_channel *mite_request_channel_in_range(struct mite_struct *mite,
 	struct mite_channel *channel = NULL;
 
 	/*  spin lock so mite_release_channel can be called safely from interrupts */
-	comedi_spin_lock_irqsave(&mite->lock, flags);
+	spin_lock_irqsave(&mite->lock, flags);
 	for (i = min_channel; i <= max_channel; ++i) {
 		if (mite->channel_allocated[i] == 0) {
 			mite->channel_allocated[i] = 1;
@@ -267,7 +267,7 @@ struct mite_channel *mite_request_channel_in_range(struct mite_struct *mite,
 			break;
 		}
 	}
-	comedi_spin_unlock_irqrestore(&mite->lock, flags);
+	spin_unlock_irqrestore(&mite->lock, flags);
 	return channel;
 }
 
@@ -277,7 +277,7 @@ void mite_release_channel(struct mite_channel *mite_chan)
 	unsigned long flags;
 
 	/*  spin lock to prevent races with mite_request_channel */
-	comedi_spin_lock_irqsave(&mite->lock, flags);
+	spin_lock_irqsave(&mite->lock, flags);
 	if (mite->channel_allocated[mite_chan->channel]) {
 		mite_dma_disarm(mite_chan);
 		mite_dma_reset(mite_chan);
@@ -292,7 +292,7 @@ MITE_CHCR reg isn't changed while dma is still active!) */
 		mite_chan->ring = NULL;
 		mmiowb();
 	}
-	comedi_spin_unlock_irqrestore(&mite->lock, flags);
+	spin_unlock_irqrestore(&mite->lock, flags);
 }
 
 void mite_dma_arm(struct mite_channel *mite_chan)
@@ -307,11 +307,11 @@ void mite_dma_arm(struct mite_channel *mite_chan)
 	smp_mb();
 	/* arm */
 	chor = CHOR_START;
-	comedi_spin_lock_irqsave(&mite->lock, flags);
+	spin_lock_irqsave(&mite->lock, flags);
 	mite_chan->done = 0;
 	writel(chor, mite->mite_io_addr + MITE_CHOR(mite_chan->channel));
 	mmiowb();
-	comedi_spin_unlock_irqrestore(&mite->lock, flags);
+	spin_unlock_irqrestore(&mite->lock, flags);
 /*       mite_dma_tcr(mite, channel); */
 }
 
@@ -413,7 +413,7 @@ void mite_prep_dma(struct mite_channel *mite_chan,
 		mcr |= CR_PSIZE32;
 		break;
 	default:
-		rt_printk
+		printk
 			("mite: bug! invalid mem bit width for dma transfer\n");
 		break;
 	}
@@ -433,7 +433,7 @@ void mite_prep_dma(struct mite_channel *mite_chan,
 		dcr |= CR_PSIZE32;
 		break;
 	default:
-		rt_printk
+		printk
 			("mite: bug! invalid dev bit width for dma transfer\n");
 		break;
 	}
@@ -539,7 +539,7 @@ int mite_sync_input_dma(struct mite_channel *mite_chan, struct comedi_async * as
 	nbytes = mite_bytes_written_to_memory_lb(mite_chan);
 	if ((int)(mite_bytes_written_to_memory_ub(mite_chan) -
 			old_alloc_count) > 0) {
-		rt_printk("mite: DMA overwrite of free area\n");
+		printk("mite: DMA overwrite of free area\n");
 		async->events |= COMEDI_CB_OVERFLOW;
 		return -1;
 	}
@@ -581,7 +581,7 @@ int mite_sync_output_dma(struct mite_channel *mite_chan, struct comedi_async * a
 		(int)(nbytes_ub - stop_count) > 0)
 		nbytes_ub = stop_count;
 	if ((int)(nbytes_ub - old_alloc_count) > 0) {
-		rt_printk("mite: DMA underrun\n");
+		printk("mite: DMA underrun\n");
 		async->events |= COMEDI_CB_OVERFLOW;
 		return -1;
 	}
@@ -602,7 +602,7 @@ unsigned mite_get_status(struct mite_channel *mite_chan)
 	unsigned status;
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&mite->lock, flags);
+	spin_lock_irqsave(&mite->lock, flags);
 	status = readl(mite->mite_io_addr + MITE_CHSR(mite_chan->channel));
 	if (status & CHSR_DONE) {
 		mite_chan->done = 1;
@@ -610,7 +610,7 @@ unsigned mite_get_status(struct mite_channel *mite_chan)
 			mite->mite_io_addr + MITE_CHOR(mite_chan->channel));
 	}
 	mmiowb();
-	comedi_spin_unlock_irqrestore(&mite->lock, flags);
+	spin_unlock_irqrestore(&mite->lock, flags);
 	return status;
 }
 
@@ -621,9 +621,9 @@ int mite_done(struct mite_channel *mite_chan)
 	int done;
 
 	mite_get_status(mite_chan);
-	comedi_spin_lock_irqsave(&mite->lock, flags);
+	spin_lock_irqsave(&mite->lock, flags);
 	done = mite_chan->done;
-	comedi_spin_unlock_irqrestore(&mite->lock, flags);
+	spin_unlock_irqrestore(&mite->lock, flags);
 	return done;
 }
 
diff --git a/drivers/staging/comedi/drivers/mite.h b/drivers/staging/comedi/drivers/mite.h
index cdaf8a31688..31942319aa3 100644
--- a/drivers/staging/comedi/drivers/mite.h
+++ b/drivers/staging/comedi/drivers/mite.h
@@ -405,7 +405,7 @@ static inline int CR_RL(unsigned int retry_limit)
 		value++;
 	}
 	if (value > 0x7)
-		rt_printk("comedi: bug! retry_limit too large\n");
+		printk("comedi: bug! retry_limit too large\n");
 	return (value & 0x7) << 21;
 }
 
diff --git a/drivers/staging/comedi/drivers/mpc624.c b/drivers/staging/comedi/drivers/mpc624.c
index a151602929d..4a0e647f631 100644
--- a/drivers/staging/comedi/drivers/mpc624.c
+++ b/drivers/staging/comedi/drivers/mpc624.c
@@ -61,19 +61,19 @@ Configuration Options:
 #include <linux/ioport.h>
 #include <linux/delay.h>
 
-// Consecutive I/O port addresses
+/* Consecutive I/O port addresses */
 #define MPC624_SIZE             16
 
-// Offsets of different ports
-#define MPC624_MASTER_CONTROL	0	// not used
-#define MPC624_GNMUXCH          1	// Gain, Mux, Channel of ADC
-#define MPC624_ADC              2	// read/write to/from ADC
-#define MPC624_EE               3	// read/write to/from serial EEPROM via I2C
-#define MPC624_LEDS             4	// write to LEDs
-#define MPC624_DIO              5	// read/write to/from digital I/O ports
-#define MPC624_IRQ_MASK         6	// IRQ masking enable/disable
+/* Offsets of different ports */
+#define MPC624_MASTER_CONTROL	0	/*  not used */
+#define MPC624_GNMUXCH          1	/*  Gain, Mux, Channel of ADC */
+#define MPC624_ADC              2	/*  read/write to/from ADC */
+#define MPC624_EE               3	/*  read/write to/from serial EEPROM via I2C */
+#define MPC624_LEDS             4	/*  write to LEDs */
+#define MPC624_DIO              5	/*  read/write to/from digital I/O ports */
+#define MPC624_IRQ_MASK         6	/*  IRQ masking enable/disable */
 
-// Register bits' names
+/* Register bits' names */
 #define MPC624_ADBUSY           (1<<5)
 #define MPC624_ADSDO            (1<<4)
 #define MPC624_ADFO             (1<<3)
@@ -81,19 +81,19 @@ Configuration Options:
 #define MPC624_ADSCK            (1<<1)
 #define MPC624_ADSDI            (1<<0)
 
-// SDI Speed/Resolution Programming bits
+/* SDI Speed/Resolution Programming bits */
 #define MPC624_OSR4             (1<<31)
 #define MPC624_OSR3             (1<<30)
 #define MPC624_OSR2             (1<<29)
 #define MPC624_OSR1             (1<<28)
 #define MPC624_OSR0             (1<<27)
 
-// 32-bit output value bits' names
+/* 32-bit output value bits' names */
 #define MPC624_EOC_BIT          (1<<31)
 #define MPC624_DMY_BIT          (1<<30)
 #define MPC624_SGN_BIT          (1<<29)
 
-// Convertion speeds
+/* Convertion speeds */
 /* OSR4 OSR3 OSR2 OSR1 OSR0  Convertion rate  RMS noise  ENOB^
  *  X    0    0    0    1        3.52kHz        23uV      17
  *  X    0    0    1    0        1.76kHz       3.5uV      20
@@ -110,123 +110,123 @@ Configuration Options:
  */
 
 #define MPC624_SPEED_3_52_kHz   (MPC624_OSR4                                           | MPC624_OSR0)
-#define MPC624_SPEED_1_76_kHz   (MPC624_OSR4                             | MPC624_OSR1              )
+#define MPC624_SPEED_1_76_kHz   (MPC624_OSR4                             | MPC624_OSR1)
 #define MPC624_SPEED_880_Hz     (MPC624_OSR4                             | MPC624_OSR1 | MPC624_OSR0)
-#define MPC624_SPEED_440_Hz     (MPC624_OSR4               | MPC624_OSR2                            )
+#define MPC624_SPEED_440_Hz     (MPC624_OSR4               | MPC624_OSR2)
 #define MPC624_SPEED_220_Hz     (MPC624_OSR4               | MPC624_OSR2               | MPC624_OSR0)
-#define MPC624_SPEED_110_Hz     (MPC624_OSR4               | MPC624_OSR2 | MPC624_OSR1              )
+#define MPC624_SPEED_110_Hz     (MPC624_OSR4               | MPC624_OSR2 | MPC624_OSR1)
 #define MPC624_SPEED_55_Hz      (MPC624_OSR4               | MPC624_OSR2 | MPC624_OSR1 | MPC624_OSR0)
-#define MPC624_SPEED_27_5_Hz    (MPC624_OSR4 | MPC624_OSR3                                          )
+#define MPC624_SPEED_27_5_Hz    (MPC624_OSR4 | MPC624_OSR3)
 #define MPC624_SPEED_13_75_Hz   (MPC624_OSR4 | MPC624_OSR3                             | MPC624_OSR0)
 #define MPC624_SPEED_6_875_Hz   (MPC624_OSR4 | MPC624_OSR3 | MPC624_OSR2 | MPC624_OSR1 | MPC624_OSR0)
-//----------------------------------------------------------------------------
+/* ---------------------------------------------------------------------------- */
 struct skel_private {
 
-	unsigned long int ulConvertionRate;	// set by mpc624_attach() from driver's parameters
+	unsigned long int ulConvertionRate;	/*  set by mpc624_attach() from driver's parameters */
 };
 
 
 #define devpriv ((struct skel_private *)dev->private)
-//----------------------------------------------------------------------------
+/* ---------------------------------------------------------------------------- */
 static const struct comedi_lrange range_mpc624_bipolar1 = {
 	1,
 	{
-//    BIP_RANGE(1.01) // this is correct,
-			// but my MPC-624 actually seems to have a range of 2.02
+/* BIP_RANGE(1.01)  this is correct, */
+			/*  but my MPC-624 actually seems to have a range of 2.02 */
 			BIP_RANGE(2.02)
 		}
 };
 static const struct comedi_lrange range_mpc624_bipolar10 = {
 	1,
 	{
-//    BIP_RANGE(10.1) // this is correct,
-			// but my MPC-624 actually seems to have a range of 20.2
+/* BIP_RANGE(10.1)   this is correct, */
+			/*  but my MPC-624 actually seems to have a range of 20.2 */
 			BIP_RANGE(20.2)
 		}
 };
 
-//----------------------------------------------------------------------------
-static int mpc624_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int mpc624_detach(struct comedi_device * dev);
-//----------------------------------------------------------------------------
+/* ---------------------------------------------------------------------------- */
+static int mpc624_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int mpc624_detach(struct comedi_device *dev);
+/* ---------------------------------------------------------------------------- */
 static struct comedi_driver driver_mpc624 = {
-      driver_name:"mpc624",
-      module:THIS_MODULE,
-      attach:mpc624_attach,
-      detach:mpc624_detach
+	.driver_name = "mpc624",
+	.module = THIS_MODULE,
+	.attach = mpc624_attach,
+	.detach = mpc624_detach
 };
 
-//----------------------------------------------------------------------------
-static int mpc624_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-//----------------------------------------------------------------------------
-static int mpc624_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+/* ---------------------------------------------------------------------------- */
+static int mpc624_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+/* ---------------------------------------------------------------------------- */
+static int mpc624_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	unsigned long iobase;
 
 	iobase = it->options[0];
-	rt_printk("comedi%d: mpc624 [0x%04lx, ", dev->minor, iobase);
+	printk("comedi%d: mpc624 [0x%04lx, ", dev->minor, iobase);
 	if (request_region(iobase, MPC624_SIZE, "mpc624") == NULL) {
-		rt_printk("I/O port(s) in use\n");
+		printk("I/O port(s) in use\n");
 		return -EIO;
 	}
 
 	dev->iobase = iobase;
 	dev->board_name = "mpc624";
 
-	// Private structure initialization
+	/*  Private structure initialization */
 	if (alloc_private(dev, sizeof(struct skel_private)) < 0)
 		return -ENOMEM;
 
 	switch (it->options[1]) {
 	case 0:
 		devpriv->ulConvertionRate = MPC624_SPEED_3_52_kHz;
-		rt_printk("3.52 kHz, ");
+		printk("3.52 kHz, ");
 		break;
 	case 1:
 		devpriv->ulConvertionRate = MPC624_SPEED_1_76_kHz;
-		rt_printk("1.76 kHz, ");
+		printk("1.76 kHz, ");
 		break;
 	case 2:
 		devpriv->ulConvertionRate = MPC624_SPEED_880_Hz;
-		rt_printk("880 Hz, ");
+		printk("880 Hz, ");
 		break;
 	case 3:
 		devpriv->ulConvertionRate = MPC624_SPEED_440_Hz;
-		rt_printk("440 Hz, ");
+		printk("440 Hz, ");
 		break;
 	case 4:
 		devpriv->ulConvertionRate = MPC624_SPEED_220_Hz;
-		rt_printk("220 Hz, ");
+		printk("220 Hz, ");
 		break;
 	case 5:
 		devpriv->ulConvertionRate = MPC624_SPEED_110_Hz;
-		rt_printk("110 Hz, ");
+		printk("110 Hz, ");
 		break;
 	case 6:
 		devpriv->ulConvertionRate = MPC624_SPEED_55_Hz;
-		rt_printk("55 Hz, ");
+		printk("55 Hz, ");
 		break;
 	case 7:
 		devpriv->ulConvertionRate = MPC624_SPEED_27_5_Hz;
-		rt_printk("27.5 Hz, ");
+		printk("27.5 Hz, ");
 		break;
 	case 8:
 		devpriv->ulConvertionRate = MPC624_SPEED_13_75_Hz;
-		rt_printk("13.75 Hz, ");
+		printk("13.75 Hz, ");
 		break;
 	case 9:
 		devpriv->ulConvertionRate = MPC624_SPEED_6_875_Hz;
-		rt_printk("6.875 Hz, ");
+		printk("6.875 Hz, ");
 		break;
 	default:
-		rt_printk
+		printk
 			("illegal convertion rate setting! Valid numbers are 0..9. Using 9 => 6.875 Hz, ");
 		devpriv->ulConvertionRate = MPC624_SPEED_3_52_kHz;
 	}
 
-	// Subdevices structures
+	/*  Subdevices structures */
 	if (alloc_subdevices(dev, 1) < 0)
 		return -ENOMEM;
 
@@ -237,29 +237,29 @@ static int mpc624_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	switch (it->options[1]) {
 	default:
 		s->maxdata = 0x3FFFFFFF;
-		rt_printk("30 bit, ");
+		printk("30 bit, ");
 	}
 
 	switch (it->options[1]) {
 	case 0:
 		s->range_table = &range_mpc624_bipolar1;
-		rt_printk("1.01V]: ");
+		printk("1.01V]: ");
 		break;
 	default:
 		s->range_table = &range_mpc624_bipolar10;
-		rt_printk("10.1V]: ");
+		printk("10.1V]: ");
 	}
 	s->len_chanlist = 1;
 	s->insn_read = mpc624_ai_rinsn;
 
-	rt_printk("attached\n");
+	printk("attached\n");
 
 	return 1;
 }
 
-static int mpc624_detach(struct comedi_device * dev)
+static int mpc624_detach(struct comedi_device *dev)
 {
-	rt_printk("comedi%d: mpc624: remove\n", dev->minor);
+	printk("comedi%d: mpc624: remove\n", dev->minor);
 
 	if (dev->iobase)
 		release_region(dev->iobase, MPC624_SIZE);
@@ -267,119 +267,119 @@ static int mpc624_detach(struct comedi_device * dev)
 	return 0;
 }
 
-// Timeout 200ms
+/* Timeout 200ms */
 #define TIMEOUT 200
 
-static int mpc624_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int mpc624_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n, i;
 	unsigned long int data_in, data_out;
 	unsigned char ucPort;
 
-	// WARNING: We always write 0 to GNSWA bit, so the channel range is +-/10.1Vdc
+	/*  WARNING: We always write 0 to GNSWA bit, so the channel range is +-/10.1Vdc */
 	outb(insn->chanspec, dev->iobase + MPC624_GNMUXCH);
-//    rt_printk("Channel %d: \n", insn->chanspec);
+/* printk("Channel %d: \n", insn->chanspec); */
 	if (!insn->n) {
-		rt_printk("MPC624: Warning, no data to aquire\n");
+		printk("MPC624: Warning, no data to aquire\n");
 		return 0;
 	}
 
 	for (n = 0; n < insn->n; n++) {
-		// Trigger the convertion
+		/*  Trigger the convertion */
 		outb(MPC624_ADSCK, dev->iobase + MPC624_ADC);
-		comedi_udelay(1);
+		udelay(1);
 		outb(MPC624_ADCS | MPC624_ADSCK, dev->iobase + MPC624_ADC);
-		comedi_udelay(1);
+		udelay(1);
 		outb(0, dev->iobase + MPC624_ADC);
-		comedi_udelay(1);
+		udelay(1);
 
-		// Wait for the convertion to end
+		/*  Wait for the convertion to end */
 		for (i = 0; i < TIMEOUT; i++) {
 			ucPort = inb(dev->iobase + MPC624_ADC);
 			if (ucPort & MPC624_ADBUSY)
-				comedi_udelay(1000);
+				udelay(1000);
 			else
 				break;
 		}
 		if (i == TIMEOUT) {
-			rt_printk("MPC624: timeout (%dms)\n", TIMEOUT);
+			printk("MPC624: timeout (%dms)\n", TIMEOUT);
 			data[n] = 0;
 			return -ETIMEDOUT;
 		}
-		// Start reading data
+		/*  Start reading data */
 		data_in = 0;
 		data_out = devpriv->ulConvertionRate;
-		comedi_udelay(1);
+		udelay(1);
 		for (i = 0; i < 32; i++) {
-			// Set the clock low
+			/*  Set the clock low */
 			outb(0, dev->iobase + MPC624_ADC);
-			comedi_udelay(1);
+			udelay(1);
 
-			if (data_out & (1 << 31))	// the next bit is a 1
+			if (data_out & (1 << 31))	/*  the next bit is a 1 */
 			{
-				// Set the ADSDI line (send to MPC624)
+				/*  Set the ADSDI line (send to MPC624) */
 				outb(MPC624_ADSDI, dev->iobase + MPC624_ADC);
-				comedi_udelay(1);
-				// Set the clock high
+				udelay(1);
+				/*  Set the clock high */
 				outb(MPC624_ADSCK | MPC624_ADSDI,
 					dev->iobase + MPC624_ADC);
-			} else	// the next bit is a 0
+			} else	/*  the next bit is a 0 */
 			{
-				// Set the ADSDI line (send to MPC624)
+				/*  Set the ADSDI line (send to MPC624) */
 				outb(0, dev->iobase + MPC624_ADC);
-				comedi_udelay(1);
-				// Set the clock high
+				udelay(1);
+				/*  Set the clock high */
 				outb(MPC624_ADSCK, dev->iobase + MPC624_ADC);
 			}
-			// Read ADSDO on high clock (receive from MPC624)
-			comedi_udelay(1);
+			/*  Read ADSDO on high clock (receive from MPC624) */
+			udelay(1);
 			data_in <<= 1;
 			data_in |=
 				(inb(dev->iobase +
 					MPC624_ADC) & MPC624_ADSDO) >> 4;
-			comedi_udelay(1);
+			udelay(1);
 
 			data_out <<= 1;
 		}
 
-		// Received 32-bit long value consist of:
-		//   31: EOC (End Of Transmission) bit - should be 0
-		//   30: DMY (Dummy) bit               - should be 0
-		//   29: SIG (Sign) bit                - 1 if the voltage is positive, 0 if negative
-		//   28: MSB (Most Significant Bit)    - the first bit of convertion result
-		//   ....
-		//   05: LSB (Least Significant Bit)   - the last bit of convertion result
-		//   04: sub-LSB                       - sub-LSBs are basically noise, but when
-		//   03: sub-LSB                         averaged properly, they can increase convertion
-		//   02: sub-LSB                         precision up to 29 bits; they can be discarded
-		//   01: sub-LSB                         without loss of resolution.
-		//   00: sub-LSB
+		/*  Received 32-bit long value consist of: */
+		/*    31: EOC (End Of Transmission) bit - should be 0 */
+		/*    30: DMY (Dummy) bit               - should be 0 */
+		/*    29: SIG (Sign) bit                - 1 if the voltage is positive, 0 if negative */
+		/*    28: MSB (Most Significant Bit)    - the first bit of convertion result */
+		/*    .... */
+		/*    05: LSB (Least Significant Bit)   - the last bit of convertion result */
+		/*    04: sub-LSB                       - sub-LSBs are basically noise, but when */
+		/*    03: sub-LSB                         averaged properly, they can increase convertion */
+		/*    02: sub-LSB                         precision up to 29 bits; they can be discarded */
+		/*    01: sub-LSB                         without loss of resolution. */
+		/*    00: sub-LSB */
 
 		if (data_in & MPC624_EOC_BIT)
-			rt_printk("MPC624: EOC bit is set (data_in=%lu)!",
+			printk("MPC624: EOC bit is set (data_in=%lu)!",
 				data_in);
 		if (data_in & MPC624_DMY_BIT)
-			rt_printk("MPC624: DMY bit is set (data_in=%lu)!",
+			printk("MPC624: DMY bit is set (data_in=%lu)!",
 				data_in);
-		if (data_in & MPC624_SGN_BIT)	// check the sign bit
-		{		// The voltage is positive
-			data_in &= 0x3FFFFFFF;	// EOC and DMY should be 0, but we will mask them out just to be sure
-			data[n] = data_in;	// comedi operates on unsigned numbers, so we don't clear the SGN bit
-			// SGN bit is still set! It's correct, since we're converting to unsigned.
-		} else {	// The voltage is negative
-			// data_in contains a number in 30-bit two's complement code and we must deal with it
+		if (data_in & MPC624_SGN_BIT)	/*  check the sign bit */
+		{		/*  The voltage is positive */
+			data_in &= 0x3FFFFFFF;	/*  EOC and DMY should be 0, but we will mask them out just to be sure */
+			data[n] = data_in;	/*  comedi operates on unsigned numbers, so we don't clear the SGN bit */
+			/*  SGN bit is still set! It's correct, since we're converting to unsigned. */
+		} else {	/*  The voltage is negative */
+			/*  data_in contains a number in 30-bit two's complement code and we must deal with it */
 			data_in |= MPC624_SGN_BIT;
 			data_in = ~data_in;
 			data_in += 1;
 			data_in &= ~(MPC624_EOC_BIT | MPC624_DMY_BIT);
-			// clear EOC and DMY bits
+			/*  clear EOC and DMY bits */
 			data_in = 0x20000000 - data_in;
 			data[n] = data_in;
 		}
 	}
 
-	// Return the number of samples read/written
+	/*  Return the number of samples read/written */
 	return n;
 }
 
diff --git a/drivers/staging/comedi/drivers/mpc8260cpm.c b/drivers/staging/comedi/drivers/mpc8260cpm.c
index bac0a7bb9cb..c7ee3ef1013 100644
--- a/drivers/staging/comedi/drivers/mpc8260cpm.c
+++ b/drivers/staging/comedi/drivers/mpc8260cpm.c
@@ -46,23 +46,23 @@ struct mpc8260cpm_private {
 
 #define devpriv ((struct mpc8260cpm_private *)dev->private)
 
-static int mpc8260cpm_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int mpc8260cpm_detach(struct comedi_device * dev);
+static int mpc8260cpm_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int mpc8260cpm_detach(struct comedi_device *dev);
 static struct comedi_driver driver_mpc8260cpm = {
-      driver_name:"mpc8260cpm",
-      module:THIS_MODULE,
-      attach:mpc8260cpm_attach,
-      detach:mpc8260cpm_detach,
+	.driver_name = "mpc8260cpm",
+	.module = THIS_MODULE,
+	.attach = mpc8260cpm_attach,
+	.detach = mpc8260cpm_detach,
 };
 
 COMEDI_INITCLEANUP(driver_mpc8260cpm);
 
-static int mpc8260cpm_dio_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int mpc8260cpm_dio_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int mpc8260cpm_dio_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int mpc8260cpm_dio_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
-static int mpc8260cpm_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int mpc8260cpm_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	int i;
@@ -93,7 +93,7 @@ static int mpc8260cpm_attach(struct comedi_device * dev, struct comedi_devconfig
 	return 1;
 }
 
-static int mpc8260cpm_detach(struct comedi_device * dev)
+static int mpc8260cpm_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: mpc8260cpm: remove\n", dev->minor);
 
@@ -114,8 +114,8 @@ static unsigned long *cpm_pdat(int port)
 	}
 }
 
-static int mpc8260cpm_dio_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int mpc8260cpm_dio_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n;
 	unsigned int d;
@@ -157,8 +157,8 @@ static int mpc8260cpm_dio_config(struct comedi_device * dev, struct comedi_subde
 	return 1;
 }
 
-static int mpc8260cpm_dio_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int mpc8260cpm_dio_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int port;
 	unsigned long *p;
diff --git a/drivers/staging/comedi/drivers/multiq3.c b/drivers/staging/comedi/drivers/multiq3.c
index 9e47574171d..f7cce6cc776 100644
--- a/drivers/staging/comedi/drivers/multiq3.c
+++ b/drivers/staging/comedi/drivers/multiq3.c
@@ -29,6 +29,7 @@ Devices: [Quanser Consulting] MultiQ-3 (multiq3)
 
 */
 
+#include <linux/interrupt.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
@@ -82,13 +83,13 @@ Devices: [Quanser Consulting] MultiQ-3 (multiq3)
 
 #define MULTIQ3_TIMEOUT 30
 
-static int multiq3_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int multiq3_detach(struct comedi_device * dev);
+static int multiq3_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int multiq3_detach(struct comedi_device *dev);
 static struct comedi_driver driver_multiq3 = {
-      driver_name:"multiq3",
-      module:THIS_MODULE,
-      attach:multiq3_attach,
-      detach:multiq3_detach,
+	.driver_name = "multiq3",
+	.module = THIS_MODULE,
+	.attach = multiq3_attach,
+	.detach = multiq3_detach,
 };
 
 COMEDI_INITCLEANUP(driver_multiq3);
@@ -98,8 +99,8 @@ struct multiq3_private {
 };
 #define devpriv ((struct multiq3_private *)dev->private)
 
-static int multiq3_ai_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int multiq3_ai_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i, n;
 	int chan;
@@ -134,8 +135,8 @@ static int multiq3_ai_insn_read(struct comedi_device * dev, struct comedi_subdev
 	return n;
 }
 
-static int multiq3_ao_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int multiq3_ao_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
@@ -147,8 +148,8 @@ static int multiq3_ao_insn_read(struct comedi_device * dev, struct comedi_subdev
 	return i;
 }
 
-static int multiq3_ao_insn_write(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int multiq3_ao_insn_write(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
@@ -165,8 +166,8 @@ static int multiq3_ao_insn_write(struct comedi_device * dev, struct comedi_subde
 	return i;
 }
 
-static int multiq3_di_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int multiq3_di_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -176,8 +177,8 @@ static int multiq3_di_insn_bits(struct comedi_device * dev, struct comedi_subdev
 	return 2;
 }
 
-static int multiq3_do_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int multiq3_do_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -191,8 +192,8 @@ static int multiq3_do_insn_bits(struct comedi_device * dev, struct comedi_subdev
 	return 2;
 }
 
-static int multiq3_encoder_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int multiq3_encoder_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n;
 	int chan = CR_CHAN(insn->chanspec);
@@ -212,7 +213,7 @@ static int multiq3_encoder_insn_read(struct comedi_device * dev, struct comedi_s
 	return n;
 }
 
-static void encoder_reset(struct comedi_device * dev)
+static void encoder_reset(struct comedi_device *dev)
 {
 	int chan;
 	for (chan = 0; chan < dev->subdevices[4].n_chan; chan++) {
@@ -235,7 +236,7 @@ static void encoder_reset(struct comedi_device * dev)
    options[2] - number of encoder chips installed
  */
 
-static int multiq3_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int multiq3_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int result = 0;
 	unsigned long iobase;
@@ -318,7 +319,7 @@ static int multiq3_attach(struct comedi_device * dev, struct comedi_devconfig *
 	return 0;
 }
 
-static int multiq3_detach(struct comedi_device * dev)
+static int multiq3_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: multiq3: remove\n", dev->minor);
 
diff --git a/drivers/staging/comedi/drivers/ni_6527.c b/drivers/staging/comedi/drivers/ni_6527.c
index e01ecb6760f..67adc97265b 100644
--- a/drivers/staging/comedi/drivers/ni_6527.c
+++ b/drivers/staging/comedi/drivers/ni_6527.c
@@ -41,6 +41,7 @@ Updated: Sat, 25 Jan 2003 13:24:40 -0800
 #define DEBUG 1
 #define DEBUG_FLAGS
 
+#include <linux/interrupt.h>
 #include "../comedidev.h"
 
 #include "mite.h"
@@ -75,13 +76,13 @@ Updated: Sat, 25 Jan 2003 13:24:40 -0800
 #define Rising_Edge_Detection_Enable(x)		(0x018+(x))
 #define Falling_Edge_Detection_Enable(x)	(0x020+(x))
 
-static int ni6527_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int ni6527_detach(struct comedi_device * dev);
+static int ni6527_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int ni6527_detach(struct comedi_device *dev);
 static struct comedi_driver driver_ni6527 = {
-      driver_name:"ni6527",
-      module:THIS_MODULE,
-      attach:ni6527_attach,
-      detach:ni6527_detach,
+	.driver_name = "ni6527",
+	.module = THIS_MODULE,
+	.attach = ni6527_attach,
+	.detach = ni6527_detach,
 };
 
 struct ni6527_board {
@@ -92,12 +93,12 @@ struct ni6527_board {
 
 static const struct ni6527_board ni6527_boards[] = {
 	{
-	      dev_id:	0x2b20,
-	      name:	"pci-6527",
+	.dev_id = 0x2b20,
+	.name = "pci-6527",
 		},
 	{
-	      dev_id:	0x2b10,
-	      name:	"pxi-6527",
+	.dev_id = 0x2b10,
+	.name = "pxi-6527",
 		},
 };
 
@@ -120,10 +121,10 @@ struct ni6527_private {
 
 #define devpriv ((struct ni6527_private *)dev->private)
 
-static int ni6527_find_device(struct comedi_device * dev, int bus, int slot);
+static int ni6527_find_device(struct comedi_device *dev, int bus, int slot);
 
-static int ni6527_di_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni6527_di_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int chan = CR_CHAN(insn->chanspec);
 	unsigned int interval;
@@ -170,8 +171,8 @@ static int ni6527_di_insn_config(struct comedi_device * dev, struct comedi_subde
 	return 2;
 }
 
-static int ni6527_di_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni6527_di_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -183,8 +184,8 @@ static int ni6527_di_insn_bits(struct comedi_device * dev, struct comedi_subdevi
 	return 2;
 }
 
-static int ni6527_do_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni6527_do_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -212,7 +213,7 @@ static int ni6527_do_insn_bits(struct comedi_device * dev, struct comedi_subdevi
 	return 2;
 }
 
-static irqreturn_t ni6527_interrupt(int irq, void *d PT_REGS_ARG)
+static irqreturn_t ni6527_interrupt(int irq, void *d)
 {
 	struct comedi_device *dev = d;
 	struct comedi_subdevice *s = dev->subdevices + 2;
@@ -233,8 +234,8 @@ static irqreturn_t ni6527_interrupt(int irq, void *d PT_REGS_ARG)
 	return IRQ_HANDLED;
 }
 
-static int ni6527_intr_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int ni6527_intr_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	int tmp;
@@ -309,9 +310,9 @@ static int ni6527_intr_cmdtest(struct comedi_device * dev, struct comedi_subdevi
 	return 0;
 }
 
-static int ni6527_intr_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int ni6527_intr_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
-	//struct comedi_cmd *cmd = &s->async->cmd;
+	/* struct comedi_cmd *cmd = &s->async->cmd; */
 
 	writeb(ClrEdge | ClrOverflow,
 		devpriv->mite->daq_io_addr + Clear_Register);
@@ -322,15 +323,15 @@ static int ni6527_intr_cmd(struct comedi_device * dev, struct comedi_subdevice *
 	return 0;
 }
 
-static int ni6527_intr_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int ni6527_intr_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	writeb(0x00, devpriv->mite->daq_io_addr + Master_Interrupt_Control);
 
 	return 0;
 }
 
-static int ni6527_intr_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni6527_intr_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n < 1)
 		return -EINVAL;
@@ -339,8 +340,8 @@ static int ni6527_intr_insn_bits(struct comedi_device * dev, struct comedi_subde
 	return 2;
 }
 
-static int ni6527_intr_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni6527_intr_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n < 1)
 		return -EINVAL;
@@ -364,14 +365,15 @@ static int ni6527_intr_insn_config(struct comedi_device * dev, struct comedi_sub
 	return 2;
 }
 
-static int ni6527_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int ni6527_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	int ret;
 
 	printk("comedi%d: ni6527:", dev->minor);
 
-	if ((ret = alloc_private(dev, sizeof(struct ni6527_private))) < 0)
+	ret = alloc_private(dev, sizeof(struct ni6527_private));
+	if (ret < 0)
 		return ret;
 
 	ret = ni6527_find_device(dev, it->options[0], it->options[1]);
@@ -389,7 +391,8 @@ static int ni6527_attach(struct comedi_device * dev, struct comedi_devconfig * i
 
 	printk(" ID=0x%02x", readb(devpriv->mite->daq_io_addr + ID_Register));
 
-	if ((ret = alloc_subdevices(dev, 3)) < 0)
+	ret = alloc_subdevices(dev, 3);
+	if (ret < 0)
 		return ret;
 
 	s = dev->subdevices + 0;
@@ -430,8 +433,8 @@ static int ni6527_attach(struct comedi_device * dev, struct comedi_devconfig * i
 		devpriv->mite->daq_io_addr + Clear_Register);
 	writeb(0x00, devpriv->mite->daq_io_addr + Master_Interrupt_Control);
 
-	ret = comedi_request_irq(mite_irq(devpriv->mite), ni6527_interrupt,
-		IRQF_SHARED, "ni6527", dev);
+	ret = request_irq(mite_irq(devpriv->mite), ni6527_interrupt,
+			  IRQF_SHARED, "ni6527", dev);
 	if (ret < 0) {
 		printk(" irq not available");
 	} else
@@ -442,7 +445,7 @@ static int ni6527_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	return 0;
 }
 
-static int ni6527_detach(struct comedi_device * dev)
+static int ni6527_detach(struct comedi_device *dev)
 {
 	if (devpriv && devpriv->mite && devpriv->mite->daq_io_addr) {
 		writeb(0x00,
@@ -450,7 +453,7 @@ static int ni6527_detach(struct comedi_device * dev)
 	}
 
 	if (dev->irq) {
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 	}
 
 	if (devpriv && devpriv->mite) {
@@ -460,7 +463,7 @@ static int ni6527_detach(struct comedi_device * dev)
 	return 0;
 }
 
-static int ni6527_find_device(struct comedi_device * dev, int bus, int slot)
+static int ni6527_find_device(struct comedi_device *dev, int bus, int slot)
 {
 	struct mite_struct *mite;
 	int i;
diff --git a/drivers/staging/comedi/drivers/ni_65xx.c b/drivers/staging/comedi/drivers/ni_65xx.c
index 6e85da16a24..35708503dec 100644
--- a/drivers/staging/comedi/drivers/ni_65xx.c
+++ b/drivers/staging/comedi/drivers/ni_65xx.c
@@ -50,6 +50,7 @@ except maybe the 6514.
 #define _GNU_SOURCE
 #define DEBUG 1
 #define DEBUG_FLAGS
+#include <linux/interrupt.h>
 #include "../comedidev.h"
 
 #include "mite.h"
@@ -102,13 +103,13 @@ static inline unsigned Filter_Enable(unsigned port)
 #define OverflowIntEnable		0x02
 #define EdgeIntEnable			0x01
 
-static int ni_65xx_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int ni_65xx_detach(struct comedi_device * dev);
+static int ni_65xx_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int ni_65xx_detach(struct comedi_device *dev);
 static struct comedi_driver driver_ni_65xx = {
-      driver_name:"ni_65xx",
-      module:THIS_MODULE,
-      attach:ni_65xx_attach,
-      detach:ni_65xx_detach,
+	.driver_name = "ni_65xx",
+	.module = THIS_MODULE,
+	.attach = ni_65xx_attach,
+	.detach = ni_65xx_detach,
 };
 
 struct ni_65xx_board {
@@ -123,120 +124,120 @@ struct ni_65xx_board {
 
 static const struct ni_65xx_board ni_65xx_boards[] = {
 	{
-	      dev_id:	0x7085,
-	      name:	"pci-6509",
-	      num_dio_ports:12,
-      invert_outputs:0},
+	.dev_id = 0x7085,
+	.name = "pci-6509",
+	.num_dio_ports = 12,
+	.invert_outputs = 0},
 	{
-	      dev_id:	0x1710,
-	      name:	"pxi-6509",
-	      num_dio_ports:12,
-      invert_outputs:0},
+	.dev_id = 0x1710,
+	.name = "pxi-6509",
+	.num_dio_ports = 12,
+	.invert_outputs = 0},
 	{
-	      dev_id:	0x7124,
-	      name:	"pci-6510",
-      num_di_ports:4},
+	.dev_id = 0x7124,
+	.name = "pci-6510",
+	.num_di_ports = 4},
 	{
-	      dev_id:	0x70c3,
-	      name:	"pci-6511",
-      num_di_ports:8},
+	.dev_id = 0x70c3,
+	.name = "pci-6511",
+	.num_di_ports = 8},
 	{
-	      dev_id:	0x70d3,
-	      name:	"pxi-6511",
-      num_di_ports:8},
+	.dev_id = 0x70d3,
+	.name = "pxi-6511",
+	.num_di_ports = 8},
 	{
-	      dev_id:	0x70cc,
-	      name:	"pci-6512",
-      num_do_ports:8},
+	.dev_id = 0x70cc,
+	.name = "pci-6512",
+	.num_do_ports = 8},
 	{
-	      dev_id:	0x70d2,
-	      name:	"pxi-6512",
-      num_do_ports:8},
+	.dev_id = 0x70d2,
+	.name = "pxi-6512",
+	.num_do_ports = 8},
 	{
-	      dev_id:	0x70c8,
-	      name:	"pci-6513",
-	      num_do_ports:8,
-      invert_outputs:1},
+	.dev_id = 0x70c8,
+	.name = "pci-6513",
+	.num_do_ports = 8,
+	.invert_outputs = 1},
 	{
-	      dev_id:	0x70d1,
-	      name:	"pxi-6513",
-	      num_do_ports:8,
-      invert_outputs:1},
+	.dev_id = 0x70d1,
+	.name = "pxi-6513",
+	.num_do_ports = 8,
+	.invert_outputs = 1},
 	{
-	      dev_id:	0x7088,
-	      name:	"pci-6514",
-	      num_di_ports:4,
-	      num_do_ports:4,
-      invert_outputs:1},
+	.dev_id = 0x7088,
+	.name = "pci-6514",
+	.num_di_ports = 4,
+	.num_do_ports = 4,
+	.invert_outputs = 1},
 	{
-	      dev_id:	0x70CD,
-	      name:	"pxi-6514",
-	      num_di_ports:4,
-	      num_do_ports:4,
-      invert_outputs:1},
+	.dev_id = 0x70CD,
+	.name = "pxi-6514",
+	.num_di_ports = 4,
+	.num_do_ports = 4,
+	.invert_outputs = 1},
 	{
-	      dev_id:	0x7087,
-	      name:	"pci-6515",
-	      num_di_ports:4,
-	      num_do_ports:4,
-      invert_outputs:1},
+	.dev_id = 0x7087,
+	.name = "pci-6515",
+	.num_di_ports = 4,
+	.num_do_ports = 4,
+	.invert_outputs = 1},
 	{
-	      dev_id:	0x70c9,
-	      name:	"pxi-6515",
-	      num_di_ports:4,
-	      num_do_ports:4,
-      invert_outputs:1},
+	.dev_id = 0x70c9,
+	.name = "pxi-6515",
+	.num_di_ports = 4,
+	.num_do_ports = 4,
+	.invert_outputs = 1},
 	{
-	      dev_id:	0x7125,
-	      name:	"pci-6516",
-	      num_do_ports:4,
-      invert_outputs:1},
+	.dev_id = 0x7125,
+	.name = "pci-6516",
+	.num_do_ports = 4,
+	.invert_outputs = 1},
 	{
-	      dev_id:	0x7126,
-	      name:	"pci-6517",
-	      num_do_ports:4,
-      invert_outputs:1},
+	.dev_id = 0x7126,
+	.name = "pci-6517",
+	.num_do_ports = 4,
+	.invert_outputs = 1},
 	{
-	      dev_id:	0x7127,
-	      name:	"pci-6518",
-	      num_di_ports:2,
-	      num_do_ports:2,
-      invert_outputs:1},
+	.dev_id = 0x7127,
+	.name = "pci-6518",
+	.num_di_ports = 2,
+	.num_do_ports = 2,
+	.invert_outputs = 1},
 	{
-	      dev_id:	0x7128,
-	      name:	"pci-6519",
-	      num_di_ports:2,
-	      num_do_ports:2,
-      invert_outputs:1},
+	.dev_id = 0x7128,
+	.name = "pci-6519",
+	.num_di_ports = 2,
+	.num_do_ports = 2,
+	.invert_outputs = 1},
 	{
-	      dev_id:	0x71c5,
-	      name:	"pci-6520",
-	      num_di_ports:1,
-	      num_do_ports:1,
+	.dev_id = 0x71c5,
+	.name = "pci-6520",
+	.num_di_ports = 1,
+	.num_do_ports = 1,
 		},
 	{
-	      dev_id:	0x718b,
-	      name:	"pci-6521",
-	      num_di_ports:1,
-	      num_do_ports:1,
+	.dev_id = 0x718b,
+	.name = "pci-6521",
+	.num_di_ports = 1,
+	.num_do_ports = 1,
 		},
 	{
-	      dev_id:	0x718c,
-	      name:	"pxi-6521",
-	      num_di_ports:1,
-	      num_do_ports:1,
+	.dev_id = 0x718c,
+	.name = "pxi-6521",
+	.num_di_ports = 1,
+	.num_do_ports = 1,
 		},
 	{
-	      dev_id:	0x70a9,
-	      name:	"pci-6528",
-	      num_di_ports:3,
-	      num_do_ports:3,
+	.dev_id = 0x70a9,
+	.name = "pci-6528",
+	.num_di_ports = 3,
+	.num_do_ports = 3,
 		},
 	{
-	      dev_id:	0x7086,
-	      name:	"pxi-6528",
-	      num_di_ports:3,
-	      num_do_ports:3,
+	.dev_id = 0x7086,
+	.name = "pxi-6528",
+	.num_di_ports = 3,
+	.num_do_ports = 3,
 		},
 };
 
@@ -249,7 +250,7 @@ static inline unsigned ni_65xx_port_by_channel(unsigned channel)
 {
 	return channel / ni_65xx_channels_per_port;
 }
-static inline unsigned ni_65xx_total_num_ports(const struct ni_65xx_board * board)
+static inline unsigned ni_65xx_total_num_ports(const struct ni_65xx_board *board)
 {
 	return board->num_dio_ports + board->num_di_ports + board->num_do_ports;
 }
@@ -312,10 +313,10 @@ static struct ni_65xx_subdevice_private *ni_65xx_alloc_subdevice_private(void)
 	return subdev_private;
 }
 
-static int ni_65xx_find_device(struct comedi_device * dev, int bus, int slot);
+static int ni_65xx_find_device(struct comedi_device *dev, int bus, int slot);
 
-static int ni_65xx_config_filter(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_65xx_config_filter(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	const unsigned chan = CR_CHAN(insn->chanspec);
 	const unsigned port =
@@ -353,8 +354,8 @@ static int ni_65xx_config_filter(struct comedi_device * dev, struct comedi_subde
 	return 2;
 }
 
-static int ni_65xx_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_65xx_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned port;
 
@@ -392,8 +393,8 @@ static int ni_65xx_dio_insn_config(struct comedi_device * dev, struct comedi_sub
 	return -EINVAL;
 }
 
-static int ni_65xx_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_65xx_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned base_bitfield_channel;
 	const unsigned max_ports_per_bitfield = 5;
@@ -437,12 +438,12 @@ static int ni_65xx_dio_insn_bits(struct comedi_device * dev, struct comedi_subde
 			writeb(bits,
 				private(dev)->mite->daq_io_addr +
 				Port_Data(port));
-//                      rt_printk("wrote 0x%x to port %i\n", bits, port);
+/* printk("wrote 0x%x to port %i\n", bits, port); */
 		}
 		port_read_bits =
 			readb(private(dev)->mite->daq_io_addr +
 			Port_Data(port));
-//              rt_printk("read 0x%x from port %i\n", port_read_bits, port);
+/* printk("read 0x%x from port %i\n", port_read_bits, port); */
 		if (bitshift > 0) {
 			port_read_bits <<= bitshift;
 		} else {
@@ -454,7 +455,7 @@ static int ni_65xx_dio_insn_bits(struct comedi_device * dev, struct comedi_subde
 	return insn->n;
 }
 
-static irqreturn_t ni_65xx_interrupt(int irq, void *d PT_REGS_ARG)
+static irqreturn_t ni_65xx_interrupt(int irq, void *d)
 {
 	struct comedi_device *dev = d;
 	struct comedi_subdevice *s = dev->subdevices + 2;
@@ -475,8 +476,8 @@ static irqreturn_t ni_65xx_interrupt(int irq, void *d PT_REGS_ARG)
 	return IRQ_HANDLED;
 }
 
-static int ni_65xx_intr_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int ni_65xx_intr_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	int tmp;
@@ -551,9 +552,9 @@ static int ni_65xx_intr_cmdtest(struct comedi_device * dev, struct comedi_subdev
 	return 0;
 }
 
-static int ni_65xx_intr_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int ni_65xx_intr_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
-	//struct comedi_cmd *cmd = &s->async->cmd;
+	/* struct comedi_cmd *cmd = &s->async->cmd; */
 
 	writeb(ClrEdge | ClrOverflow,
 		private(dev)->mite->daq_io_addr + Clear_Register);
@@ -564,7 +565,7 @@ static int ni_65xx_intr_cmd(struct comedi_device * dev, struct comedi_subdevice
 	return 0;
 }
 
-static int ni_65xx_intr_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int ni_65xx_intr_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	writeb(0x00,
 		private(dev)->mite->daq_io_addr + Master_Interrupt_Control);
@@ -572,8 +573,8 @@ static int ni_65xx_intr_cancel(struct comedi_device * dev, struct comedi_subdevi
 	return 0;
 }
 
-static int ni_65xx_intr_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_65xx_intr_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n < 1)
 		return -EINVAL;
@@ -582,8 +583,8 @@ static int ni_65xx_intr_insn_bits(struct comedi_device * dev, struct comedi_subd
 	return 2;
 }
 
-static int ni_65xx_intr_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_65xx_intr_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n < 1)
 		return -EINVAL;
@@ -619,7 +620,7 @@ static int ni_65xx_intr_insn_config(struct comedi_device * dev, struct comedi_su
 	return 2;
 }
 
-static int ni_65xx_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int ni_65xx_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	unsigned i;
@@ -627,7 +628,8 @@ static int ni_65xx_attach(struct comedi_device * dev, struct comedi_devconfig *
 
 	printk("comedi%d: ni_65xx:", dev->minor);
 
-	if ((ret = alloc_private(dev, sizeof(struct ni_65xx_private))) < 0)
+	ret = alloc_private(dev, sizeof(struct ni_65xx_private));
+	if (ret < 0)
 		return ret;
 
 	ret = ni_65xx_find_device(dev, it->options[0], it->options[1]);
@@ -647,7 +649,8 @@ static int ni_65xx_attach(struct comedi_device * dev, struct comedi_devconfig *
 	printk(" ID=0x%02x",
 		readb(private(dev)->mite->daq_io_addr + ID_Register));
 
-	if ((ret = alloc_subdevices(dev, 4)) < 0)
+	ret = alloc_subdevices(dev, 4);
+	if (ret < 0)
 		return ret;
 
 	s = dev->subdevices + 0;
@@ -700,7 +703,7 @@ static int ni_65xx_attach(struct comedi_device * dev, struct comedi_devconfig *
 			return -ENOMEM;
 		sprivate(s)->base_port = 0;
 		for (i = 0; i < board(dev)->num_dio_ports; ++i) {
-			// configure all ports for input
+			/*  configure all ports for input */
 			writeb(0x1,
 				private(dev)->mite->daq_io_addr +
 				Port_Select(i));
@@ -740,8 +743,8 @@ static int ni_65xx_attach(struct comedi_device * dev, struct comedi_devconfig *
 	/* Set filter interval to 0  (32bit reg) */
 	writeb(0x00000000, private(dev)->mite->daq_io_addr + Filter_Interval);
 
-	ret = comedi_request_irq(dev->irq, ni_65xx_interrupt, IRQF_SHARED,
-		"ni_65xx", dev);
+	ret = request_irq(dev->irq, ni_65xx_interrupt, IRQF_SHARED,
+			  "ni_65xx", dev);
 	if (ret < 0) {
 		dev->irq = 0;
 		printk(" irq not available");
@@ -752,7 +755,7 @@ static int ni_65xx_attach(struct comedi_device * dev, struct comedi_devconfig *
 	return 0;
 }
 
-static int ni_65xx_detach(struct comedi_device * dev)
+static int ni_65xx_detach(struct comedi_device *dev)
 {
 	if (private(dev) && private(dev)->mite
 		&& private(dev)->mite->daq_io_addr) {
@@ -762,7 +765,7 @@ static int ni_65xx_detach(struct comedi_device * dev)
 	}
 
 	if (dev->irq) {
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 	}
 
 	if (private(dev)) {
@@ -780,7 +783,7 @@ static int ni_65xx_detach(struct comedi_device * dev)
 	return 0;
 }
 
-static int ni_65xx_find_device(struct comedi_device * dev, int bus, int slot)
+static int ni_65xx_find_device(struct comedi_device *dev, int bus, int slot)
 {
 	struct mite_struct *mite;
 	int i;
diff --git a/drivers/staging/comedi/drivers/ni_660x.c b/drivers/staging/comedi/drivers/ni_660x.c
index 14e35ba721e..11e9b041180 100644
--- a/drivers/staging/comedi/drivers/ni_660x.c
+++ b/drivers/staging/comedi/drivers/ni_660x.c
@@ -40,6 +40,7 @@ DAQ 6601/6602 User Manual (NI 322137B-01)
 
 */
 
+#include <linux/interrupt.h>
 #include "../comedidev.h"
 #include "mite.h"
 #include "ni_tio.h"
@@ -51,7 +52,7 @@ enum ni_660x_constants {
 };
 
 #define NUM_PFI_CHANNELS 40
-// really there are only up to 3 dma channels, but the register layout allows for 4
+/* really there are only up to 3 dma channels, but the register layout allows for 4 */
 #define MAX_DMA_CHANNEL 4
 
 /* See Register-Level Programmer Manual page 3.1 */
@@ -194,10 +195,10 @@ static inline unsigned NI_660X_GPCT_SUBDEV(unsigned index)
 
 struct NI_660xRegisterData {
 
-	const char *name;	// Register Name
-	int offset;		// Offset from base address from GPCT chip
+	const char *name;	/*  Register Name */
+	int offset;		/*  Offset from base address from GPCT chip */
 	enum ni_660x_register_direction direction;
-	enum ni_660x_register_width size;	// 1 byte, 2 bytes, or 4 bytes
+	enum ni_660x_register_width size;	/*  1 byte, 2 bytes, or 4 bytes */
 };
 
 
@@ -302,12 +303,12 @@ static const struct NI_660xRegisterData registerData[NumRegisters] = {
 	{"IO Config Register 38-39", 0x7A2, NI_660x_READ_WRITE, DATA_2B}
 };
 
-// kind of ENABLE for the second counter
+/* kind of ENABLE for the second counter */
 enum clock_config_register_bits {
 	CounterSwap = 0x1 << 21
 };
 
-// ioconfigreg
+/* ioconfigreg */
 static inline unsigned ioconfig_bitshift(unsigned pfi_channel)
 {
 	if (pfi_channel % 2)
@@ -334,7 +335,7 @@ static inline unsigned pfi_input_select_bits(unsigned pfi_channel,
 	return (input_select & 0x7) << (4 + ioconfig_bitshift(pfi_channel));
 }
 
-// dma configuration register bits
+/* dma configuration register bits */
 static inline unsigned dma_select_mask(unsigned dma_channel)
 {
 	BUG_ON(dma_channel >= MAX_DMA_CHANNEL);
@@ -374,7 +375,7 @@ enum global_interrupt_config_register_bits {
 	Global_Int_Enable_Bit = 0x80000000
 };
 
-// Offset of the GPCT chips from the base-adress of the card
+/* Offset of the GPCT chips from the base-adress of the card */
 static const unsigned GPCT_OFFSET[2] = { 0x0, 0x800 };	/* First chip is at base-address +
 							   0x00, etc. */
 
@@ -387,24 +388,24 @@ struct ni_660x_board {
 
 static const struct ni_660x_board ni_660x_boards[] = {
 	{
-	      dev_id:	0x2c60,
-	      name:	"PCI-6601",
-	      n_chips:	1,
+	.dev_id = 0x2c60,
+	.name = "PCI-6601",
+	.n_chips = 1,
 		},
 	{
-	      dev_id:	0x1310,
-	      name:	"PCI-6602",
-	      n_chips:	2,
+	.dev_id = 0x1310,
+	.name = "PCI-6602",
+	.n_chips = 2,
 		},
 	{
-	      dev_id:	0x1360,
-	      name:	"PXI-6602",
-	      n_chips:	2,
+	.dev_id = 0x1360,
+	.name = "PXI-6602",
+	.n_chips = 2,
 		},
 	{
-	      dev_id:	0x2cc0,
-	      name:	"PXI-6608",
-	      n_chips:	2,
+	.dev_id = 0x2cc0,
+	.name = "PXI-6608",
+	.n_chips = 2,
 		},
 };
 
@@ -428,6 +429,8 @@ struct ni_660x_private {
 	struct mite_dma_descriptor_ring
 	*mite_rings[NI_660X_MAX_NUM_CHIPS][counters_per_chip];
 	spinlock_t mite_channel_lock;
+	/* interrupt_lock prevents races between interrupt and comedi_poll */
+	spinlock_t interrupt_lock;
 	unsigned dma_configuration_soft_copies[NI_660X_MAX_NUM_CHIPS];
 	spinlock_t soft_reg_copy_lock;
 	unsigned short pfi_output_selects[NUM_PFI_CHANNELS];
@@ -446,40 +449,40 @@ static inline const struct ni_660x_board *board(struct comedi_device * dev)
 
 #define n_ni_660x_boards (sizeof(ni_660x_boards)/sizeof(ni_660x_boards[0]))
 
-static int ni_660x_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int ni_660x_detach(struct comedi_device * dev);
-static void init_tio_chip(struct comedi_device * dev, int chipset);
-static void ni_660x_select_pfi_output(struct comedi_device * dev, unsigned pfi_channel,
+static int ni_660x_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int ni_660x_detach(struct comedi_device *dev);
+static void init_tio_chip(struct comedi_device *dev, int chipset);
+static void ni_660x_select_pfi_output(struct comedi_device *dev, unsigned pfi_channel,
 	unsigned output_select);
 
 static struct comedi_driver driver_ni_660x = {
-      driver_name:"ni_660x",
-      module:THIS_MODULE,
-      attach:ni_660x_attach,
-      detach:ni_660x_detach,
+	.driver_name = "ni_660x",
+	.module = THIS_MODULE,
+	.attach = ni_660x_attach,
+	.detach = ni_660x_detach,
 };
 
 COMEDI_PCI_INITCLEANUP(driver_ni_660x, ni_660x_pci_table);
 
-static int ni_660x_find_device(struct comedi_device * dev, int bus, int slot);
-static int ni_660x_set_pfi_routing(struct comedi_device * dev, unsigned chan,
+static int ni_660x_find_device(struct comedi_device *dev, int bus, int slot);
+static int ni_660x_set_pfi_routing(struct comedi_device *dev, unsigned chan,
 	unsigned source);
 
 /* Possible instructions for a GPCT */
-static int ni_660x_GPCT_rinsn(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data);
-static int ni_660x_GPCT_insn_config(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data);
-static int ni_660x_GPCT_winsn(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data);
+static int ni_660x_GPCT_rinsn(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data);
+static int ni_660x_GPCT_insn_config(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data);
+static int ni_660x_GPCT_winsn(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data);
 
 /* Possible instructions for Digital IO */
-static int ni_660x_dio_insn_config(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data);
-static int ni_660x_dio_insn_bits(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data);
+static int ni_660x_dio_insn_config(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data);
+static int ni_660x_dio_insn_bits(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data);
 
-static inline unsigned ni_660x_num_counters(struct comedi_device * dev)
+static inline unsigned ni_660x_num_counters(struct comedi_device *dev)
 {
 	return board(dev)->n_chips * counters_per_chip;
 }
@@ -693,8 +696,8 @@ static enum NI_660x_Register ni_gpct_to_660x_register(enum ni_gpct_register reg)
 		ni_660x_register = G3InterruptEnable;
 		break;
 	default:
-		rt_printk("%s: unhandled register 0x%x in switch.\n",
-			__FUNCTION__, reg);
+		printk("%s: unhandled register 0x%x in switch.\n",
+			__func__, reg);
 		BUG();
 		return 0;
 		break;
@@ -702,7 +705,7 @@ static enum NI_660x_Register ni_gpct_to_660x_register(enum ni_gpct_register reg)
 	return ni_660x_register;
 }
 
-static inline void ni_660x_write_register(struct comedi_device * dev,
+static inline void ni_660x_write_register(struct comedi_device *dev,
 	unsigned chip_index, unsigned bits, enum NI_660x_Register reg)
 {
 	void *const write_address =
@@ -717,14 +720,14 @@ static inline void ni_660x_write_register(struct comedi_device * dev,
 		writel(bits, write_address);
 		break;
 	default:
-		rt_printk("%s: %s: bug! unhandled case (reg=0x%x) in switch.\n",
-			__FILE__, __FUNCTION__, reg);
+		printk("%s: %s: bug! unhandled case (reg=0x%x) in switch.\n",
+			__FILE__, __func__, reg);
 		BUG();
 		break;
 	}
 }
 
-static inline unsigned ni_660x_read_register(struct comedi_device * dev,
+static inline unsigned ni_660x_read_register(struct comedi_device *dev,
 	unsigned chip_index, enum NI_660x_Register reg)
 {
 	void *const read_address =
@@ -739,8 +742,8 @@ static inline unsigned ni_660x_read_register(struct comedi_device * dev,
 		return readl(read_address);
 		break;
 	default:
-		rt_printk("%s: %s: bug! unhandled case (reg=0x%x) in switch.\n",
-			__FILE__, __FUNCTION__, reg);
+		printk("%s: %s: bug! unhandled case (reg=0x%x) in switch.\n",
+			__FILE__, __func__, reg);
 		BUG();
 		break;
 	}
@@ -771,11 +774,11 @@ static inline struct mite_dma_descriptor_ring *mite_ring(struct ni_660x_private
 	return priv->mite_rings[counter->chip_index][counter->counter_index];
 }
 
-static inline void ni_660x_set_dma_channel(struct comedi_device * dev,
+static inline void ni_660x_set_dma_channel(struct comedi_device *dev,
 	unsigned mite_channel, struct ni_gpct *counter)
 {
 	unsigned long flags;
-	comedi_spin_lock_irqsave(&private(dev)->soft_reg_copy_lock, flags);
+	spin_lock_irqsave(&private(dev)->soft_reg_copy_lock, flags);
 	private(dev)->dma_configuration_soft_copies[counter->chip_index] &=
 		~dma_select_mask(mite_channel);
 	private(dev)->dma_configuration_soft_copies[counter->chip_index] |=
@@ -786,14 +789,14 @@ static inline void ni_660x_set_dma_channel(struct comedi_device * dev,
 			chip_index] | dma_reset_bit(mite_channel),
 		DMAConfigRegister);
 	mmiowb();
-	comedi_spin_unlock_irqrestore(&private(dev)->soft_reg_copy_lock, flags);
+	spin_unlock_irqrestore(&private(dev)->soft_reg_copy_lock, flags);
 }
 
-static inline void ni_660x_unset_dma_channel(struct comedi_device * dev,
+static inline void ni_660x_unset_dma_channel(struct comedi_device *dev,
 	unsigned mite_channel, struct ni_gpct *counter)
 {
 	unsigned long flags;
-	comedi_spin_lock_irqsave(&private(dev)->soft_reg_copy_lock, flags);
+	spin_lock_irqsave(&private(dev)->soft_reg_copy_lock, flags);
 	private(dev)->dma_configuration_soft_copies[counter->chip_index] &=
 		~dma_select_mask(mite_channel);
 	private(dev)->dma_configuration_soft_copies[counter->chip_index] |=
@@ -802,22 +805,22 @@ static inline void ni_660x_unset_dma_channel(struct comedi_device * dev,
 		private(dev)->dma_configuration_soft_copies[counter->
 			chip_index], DMAConfigRegister);
 	mmiowb();
-	comedi_spin_unlock_irqrestore(&private(dev)->soft_reg_copy_lock, flags);
+	spin_unlock_irqrestore(&private(dev)->soft_reg_copy_lock, flags);
 }
 
-static int ni_660x_request_mite_channel(struct comedi_device * dev,
+static int ni_660x_request_mite_channel(struct comedi_device *dev,
 	struct ni_gpct *counter, enum comedi_io_direction direction)
 {
 	unsigned long flags;
 	struct mite_channel *mite_chan;
 
-	comedi_spin_lock_irqsave(&private(dev)->mite_channel_lock, flags);
+	spin_lock_irqsave(&private(dev)->mite_channel_lock, flags);
 	BUG_ON(counter->mite_chan);
 	mite_chan =
 		mite_request_channel(private(dev)->mite, mite_ring(private(dev),
 			counter));
 	if (mite_chan == NULL) {
-		comedi_spin_unlock_irqrestore(&private(dev)->mite_channel_lock,
+		spin_unlock_irqrestore(&private(dev)->mite_channel_lock,
 			flags);
 		comedi_error(dev,
 			"failed to reserve mite dma channel for counter.");
@@ -826,15 +829,15 @@ static int ni_660x_request_mite_channel(struct comedi_device * dev,
 	mite_chan->dir = direction;
 	ni_tio_set_mite_channel(counter, mite_chan);
 	ni_660x_set_dma_channel(dev, mite_chan->channel, counter);
-	comedi_spin_unlock_irqrestore(&private(dev)->mite_channel_lock, flags);
+	spin_unlock_irqrestore(&private(dev)->mite_channel_lock, flags);
 	return 0;
 }
 
-void ni_660x_release_mite_channel(struct comedi_device * dev, struct ni_gpct *counter)
+void ni_660x_release_mite_channel(struct comedi_device *dev, struct ni_gpct *counter)
 {
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&private(dev)->mite_channel_lock, flags);
+	spin_lock_irqsave(&private(dev)->mite_channel_lock, flags);
 	if (counter->mite_chan) {
 		struct mite_channel *mite_chan = counter->mite_chan;
 
@@ -842,15 +845,15 @@ void ni_660x_release_mite_channel(struct comedi_device * dev, struct ni_gpct *co
 		ni_tio_set_mite_channel(counter, NULL);
 		mite_release_channel(mite_chan);
 	}
-	comedi_spin_unlock_irqrestore(&private(dev)->mite_channel_lock, flags);
+	spin_unlock_irqrestore(&private(dev)->mite_channel_lock, flags);
 }
 
-static int ni_660x_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int ni_660x_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	int retval;
 
 	struct ni_gpct *counter = subdev_to_counter(s);
-//      const struct comedi_cmd *cmd = &s->async->cmd;
+/* const struct comedi_cmd *cmd = &s->async->cmd; */
 
 	retval = ni_660x_request_mite_channel(dev, counter, COMEDI_INPUT);
 	if (retval) {
@@ -864,15 +867,15 @@ static int ni_660x_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 	return retval;
 }
 
-static int ni_660x_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int ni_660x_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	struct ni_gpct *counter = subdev_to_counter(s);
 
 	return ni_tio_cmdtest(counter, cmd);
 }
 
-static int ni_660x_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int ni_660x_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct ni_gpct *counter = subdev_to_counter(s);
 	int retval;
@@ -882,7 +885,7 @@ static int ni_660x_cancel(struct comedi_device * dev, struct comedi_subdevice *
 	return retval;
 }
 
-static void set_tio_counterswap(struct comedi_device * dev, int chipset)
+static void set_tio_counterswap(struct comedi_device *dev, int chipset)
 {
 	/* See P. 3.5 of the Register-Level Programming manual.  The
 	   CounterSwap bit has to be set on the second chip, otherwise
@@ -895,8 +898,8 @@ static void set_tio_counterswap(struct comedi_device * dev, int chipset)
 		ni_660x_write_register(dev, chipset, 0, ClockConfigRegister);
 }
 
-static void ni_660x_handle_gpct_interrupt(struct comedi_device * dev,
-	struct comedi_subdevice * s)
+static void ni_660x_handle_gpct_interrupt(struct comedi_device *dev,
+	struct comedi_subdevice *s)
 {
 	ni_tio_handle_interrupt(subdev_to_counter(s), s);
 	if (s->async->events) {
@@ -909,23 +912,38 @@ static void ni_660x_handle_gpct_interrupt(struct comedi_device * dev,
 	}
 }
 
-static irqreturn_t ni_660x_interrupt(int irq, void *d PT_REGS_ARG)
+static irqreturn_t ni_660x_interrupt(int irq, void *d)
 {
 	struct comedi_device *dev = d;
 	struct comedi_subdevice *s;
 	unsigned i;
+	unsigned long flags;
 
 	if (dev->attached == 0)
 		return IRQ_NONE;
+	/* lock to avoid race with comedi_poll */
+	spin_lock_irqsave(&private(dev)->interrupt_lock, flags);
 	smp_mb();
 	for (i = 0; i < ni_660x_num_counters(dev); ++i) {
 		s = dev->subdevices + NI_660X_GPCT_SUBDEV(i);
 		ni_660x_handle_gpct_interrupt(dev, s);
 	}
+	spin_unlock_irqrestore(&private(dev)->interrupt_lock, flags);
 	return IRQ_HANDLED;
 }
 
-static int ni_660x_buf_change(struct comedi_device * dev, struct comedi_subdevice * s,
+static int ni_660x_input_poll(struct comedi_device *dev,
+			      struct comedi_subdevice *s)
+{
+	unsigned long flags;
+	/* lock to avoid race with comedi_poll */
+	spin_lock_irqsave(&private(dev)->interrupt_lock, flags);
+	mite_sync_input_dma(subdev_to_counter(s)->mite_chan, s->async);
+	spin_unlock_irqrestore(&private(dev)->interrupt_lock, flags);
+	return comedi_buf_read_n_available(s->async);
+}
+
+static int ni_660x_buf_change(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned long new_size)
 {
 	int ret;
@@ -938,14 +956,17 @@ static int ni_660x_buf_change(struct comedi_device * dev, struct comedi_subdevic
 	return 0;
 }
 
-static int ni_660x_allocate_private(struct comedi_device * dev)
+static int ni_660x_allocate_private(struct comedi_device *dev)
 {
 	int retval;
 	unsigned i;
 
-	if ((retval = alloc_private(dev, sizeof(struct ni_660x_private))) < 0)
+	retval = alloc_private(dev, sizeof(struct ni_660x_private));
+	if (retval < 0)
 		return retval;
+
 	spin_lock_init(&private(dev)->mite_channel_lock);
+	spin_lock_init(&private(dev)->interrupt_lock);
 	spin_lock_init(&private(dev)->soft_reg_copy_lock);
 	for (i = 0; i < NUM_PFI_CHANNELS; ++i) {
 		private(dev)->pfi_output_selects[i] = pfi_output_select_counter;
@@ -953,7 +974,7 @@ static int ni_660x_allocate_private(struct comedi_device * dev)
 	return 0;
 }
 
-static int ni_660x_alloc_mite_rings(struct comedi_device * dev)
+static int ni_660x_alloc_mite_rings(struct comedi_device *dev)
 {
 	unsigned i;
 	unsigned j;
@@ -970,7 +991,7 @@ static int ni_660x_alloc_mite_rings(struct comedi_device * dev)
 	return 0;
 }
 
-static void ni_660x_free_mite_rings(struct comedi_device * dev)
+static void ni_660x_free_mite_rings(struct comedi_device *dev)
 {
 	unsigned i;
 	unsigned j;
@@ -982,7 +1003,7 @@ static void ni_660x_free_mite_rings(struct comedi_device * dev)
 	}
 }
 
-static int ni_660x_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int ni_660x_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	int ret;
@@ -1031,7 +1052,7 @@ static int ni_660x_attach(struct comedi_device * dev, struct comedi_devconfig *
 	s->insn_bits = ni_660x_dio_insn_bits;
 	s->insn_config = ni_660x_dio_insn_config;
 	s->io_bits = 0;		/* all bits default to input */
-	// we use the ioconfig registers to control dio direction, so zero output enables in stc dio control reg
+	/*  we use the ioconfig registers to control dio direction, so zero output enables in stc dio control reg */
 	ni_660x_write_register(dev, 0, 0, STCDIOControl);
 
 	private(dev)->counter_dev = ni_gpct_device_construct(dev,
@@ -1055,6 +1076,7 @@ static int ni_660x_attach(struct comedi_device * dev, struct comedi_devconfig *
 			s->len_chanlist = 1;
 			s->do_cmdtest = &ni_660x_cmdtest;
 			s->cancel = &ni_660x_cancel;
+			s->poll = &ni_660x_input_poll;
 			s->async_dma_dir = DMA_BIDIRECTIONAL;
 			s->buf_change = &ni_660x_buf_change;
 			s->private = &private(dev)->counter_dev->counters[i];
@@ -1086,9 +1108,9 @@ static int ni_660x_attach(struct comedi_device * dev, struct comedi_devconfig *
 	for (i = 0; i < board(dev)->n_chips; ++i) {
 		set_tio_counterswap(dev, i);
 	}
-	if ((ret = comedi_request_irq(mite_irq(private(dev)->mite),
-				&ni_660x_interrupt, IRQF_SHARED, "ni_660x",
-				dev)) < 0) {
+	ret = request_irq(mite_irq(private(dev)->mite), ni_660x_interrupt,
+			  IRQF_SHARED, "ni_660x", dev);
+	if (ret < 0) {
 		printk(" irq not available\n");
 		return ret;
 	}
@@ -1102,13 +1124,13 @@ static int ni_660x_attach(struct comedi_device * dev, struct comedi_devconfig *
 	return 0;
 }
 
-static int ni_660x_detach(struct comedi_device * dev)
+static int ni_660x_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: ni_660x: remove\n", dev->minor);
 
 	/* Free irq */
 	if (dev->irq)
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 
 	if (dev->private) {
 		if (private(dev)->counter_dev)
@@ -1122,17 +1144,17 @@ static int ni_660x_detach(struct comedi_device * dev)
 }
 
 static int
-ni_660x_GPCT_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+ni_660x_GPCT_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	return ni_tio_rinsn(subdev_to_counter(s), insn, data);
 }
 
-static void init_tio_chip(struct comedi_device * dev, int chipset)
+static void init_tio_chip(struct comedi_device *dev, int chipset)
 {
 	unsigned i;
 
-	// init dma configuration register
+	/*  init dma configuration register */
 	private(dev)->dma_configuration_soft_copies[chipset] = 0;
 	for (i = 0; i < MAX_DMA_CHANNEL; ++i) {
 		private(dev)->dma_configuration_soft_copies[chipset] |=
@@ -1142,26 +1164,26 @@ static void init_tio_chip(struct comedi_device * dev, int chipset)
 	ni_660x_write_register(dev, chipset,
 		private(dev)->dma_configuration_soft_copies[chipset],
 		DMAConfigRegister);
-	for(i = 0; i < NUM_PFI_CHANNELS; ++i)
+	for (i = 0; i < NUM_PFI_CHANNELS; ++i)
 	{
 		ni_660x_write_register(dev, chipset, 0, IOConfigReg(i));
 	}
 }
 
 static int
-ni_660x_GPCT_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+ni_660x_GPCT_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	return ni_tio_insn_config(subdev_to_counter(s), insn, data);
 }
 
-static int ni_660x_GPCT_winsn(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+static int ni_660x_GPCT_winsn(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 	return ni_tio_winsn(subdev_to_counter(s), insn, data);
 }
 
-static int ni_660x_find_device(struct comedi_device * dev, int bus, int slot)
+static int ni_660x_find_device(struct comedi_device *dev, int bus, int slot)
 {
 	struct mite_struct *mite;
 	int i;
@@ -1188,12 +1210,12 @@ static int ni_660x_find_device(struct comedi_device * dev, int bus, int slot)
 	return -EIO;
 }
 
-static int ni_660x_dio_insn_bits(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+static int ni_660x_dio_insn_bits(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned base_bitfield_channel = CR_CHAN(insn->chanspec);
 
-	// Check if we have to write some bits
+	/*  Check if we have to write some bits */
 	if (data[0]) {
 		s->state &= ~(data[0] << base_bitfield_channel);
 		s->state |= (data[0] & data[1]) << base_bitfield_channel;
@@ -1208,7 +1230,7 @@ static int ni_660x_dio_insn_bits(struct comedi_device * dev,
 	return 2;
 }
 
-static void ni_660x_select_pfi_output(struct comedi_device * dev, unsigned pfi_channel,
+static void ni_660x_select_pfi_output(struct comedi_device *dev, unsigned pfi_channel,
 	unsigned output_select)
 {
 	static const unsigned counter_4_7_first_pfi = 8;
@@ -1218,8 +1240,8 @@ static void ni_660x_select_pfi_output(struct comedi_device * dev, unsigned pfi_c
 	unsigned active_bits;
 	unsigned idle_bits;
 
-	if(board(dev)->n_chips > 1) {
-		if(output_select == pfi_output_select_counter &&
+	if (board (dev)->n_chips > 1) {
+		if (output_select == pfi_output_select_counter &&
 			pfi_channel >= counter_4_7_first_pfi &&
 			pfi_channel <= counter_4_7_last_pfi) {
 			active_chipset = 1;
@@ -1230,7 +1252,7 @@ static void ni_660x_select_pfi_output(struct comedi_device * dev, unsigned pfi_c
 		}
 	}
 
-	if(idle_chipset != active_chipset) {
+	if (idle_chipset != active_chipset) {
 		idle_bits = ni_660x_read_register(dev, idle_chipset, IOConfigReg(pfi_channel));
 		idle_bits &= ~pfi_output_select_mask(pfi_channel);
 		idle_bits |= pfi_output_select_bits(pfi_channel, pfi_output_select_high_Z);
@@ -1243,7 +1265,7 @@ static void ni_660x_select_pfi_output(struct comedi_device * dev, unsigned pfi_c
 	ni_660x_write_register(dev, active_chipset, active_bits, IOConfigReg(pfi_channel));
 }
 
-static int ni_660x_set_pfi_routing(struct comedi_device * dev, unsigned chan,
+static int ni_660x_set_pfi_routing(struct comedi_device *dev, unsigned chan,
 	unsigned source)
 {
 	if (source > num_pfi_output_selects)
@@ -1266,13 +1288,13 @@ static int ni_660x_set_pfi_routing(struct comedi_device * dev, unsigned chan,
 	return 0;
 }
 
-static unsigned ni_660x_get_pfi_routing(struct comedi_device * dev, unsigned chan)
+static unsigned ni_660x_get_pfi_routing(struct comedi_device *dev, unsigned chan)
 {
 	BUG_ON(chan >= NUM_PFI_CHANNELS);
 	return private(dev)->pfi_output_selects[chan];
 }
 
-static void ni660x_config_filter(struct comedi_device * dev, unsigned pfi_channel,
+static void ni660x_config_filter(struct comedi_device *dev, unsigned pfi_channel,
 	enum ni_gpct_filter_select filter)
 {
 	unsigned bits = ni_660x_read_register(dev, 0, IOConfigReg(pfi_channel));
@@ -1281,8 +1303,8 @@ static void ni660x_config_filter(struct comedi_device * dev, unsigned pfi_channe
 	ni_660x_write_register(dev, 0, bits, IOConfigReg(pfi_channel));
 }
 
-static int ni_660x_dio_insn_config(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+static int ni_660x_dio_insn_config(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 	int chan = CR_CHAN(insn->chanspec);
 
diff --git a/drivers/staging/comedi/drivers/ni_670x.c b/drivers/staging/comedi/drivers/ni_670x.c
index d1312e073a6..71f7d3ab3aa 100644
--- a/drivers/staging/comedi/drivers/ni_670x.c
+++ b/drivers/staging/comedi/drivers/ni_670x.c
@@ -41,6 +41,7 @@ Commands are not supported.
 
 */
 
+#include <linux/interrupt.h>
 #include "../comedidev.h"
 
 #include "mite.h"
@@ -69,29 +70,29 @@ struct ni_670x_board {
 
 static const struct ni_670x_board ni_670x_boards[] = {
 	{
-	      dev_id:	0x2c90,
-	      name:	"PCI-6703",
-	      ao_chans:16,
-	      ao_bits:	16,
+	.dev_id = 0x2c90,
+	.name = "PCI-6703",
+	.ao_chans = 16,
+	.ao_bits = 16,
 		},
 	{
-	      dev_id:	0x1920,
-	      name:	"PXI-6704",
-	      ao_chans:32,
-	      ao_bits:	16,
+	.dev_id = 0x1920,
+	.name = "PXI-6704",
+	.ao_chans = 32,
+	.ao_bits = 16,
 		},
 	{
-	      dev_id:	0x1290,
-	      name:	"PCI-6704",
-	      ao_chans:32,
-	      ao_bits:	16,
+	.dev_id = 0x1290,
+	.name = "PCI-6704",
+	.ao_chans = 32,
+	.ao_bits = 16,
 		},
 };
 
 static DEFINE_PCI_DEVICE_TABLE(ni_670x_pci_table) = {
 	{PCI_VENDOR_ID_NATINST, 0x2c90, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{PCI_VENDOR_ID_NATINST, 0x1920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	//{ PCI_VENDOR_ID_NATINST, 0x0000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	/* { PCI_VENDOR_ID_NATINST, 0x0000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */
 	{0}
 };
 
@@ -111,32 +112,32 @@ struct ni_670x_private {
 #define devpriv ((struct ni_670x_private *)dev->private)
 #define n_ni_670x_boards (sizeof(ni_670x_boards)/sizeof(ni_670x_boards[0]))
 
-static int ni_670x_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int ni_670x_detach(struct comedi_device * dev);
+static int ni_670x_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int ni_670x_detach(struct comedi_device *dev);
 
 static struct comedi_driver driver_ni_670x = {
-      driver_name:"ni_670x",
-      module:THIS_MODULE,
-      attach:ni_670x_attach,
-      detach:ni_670x_detach,
+	.driver_name = "ni_670x",
+	.module = THIS_MODULE,
+	.attach = ni_670x_attach,
+	.detach = ni_670x_detach,
 };
 
 COMEDI_PCI_INITCLEANUP(driver_ni_670x, ni_670x_pci_table);
 
 static struct comedi_lrange range_0_20mA = { 1, {RANGE_mA(0, 20)} };
 
-static int ni_670x_find_device(struct comedi_device * dev, int bus, int slot);
+static int ni_670x_find_device(struct comedi_device *dev, int bus, int slot);
 
-static int ni_670x_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int ni_670x_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int ni_670x_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int ni_670x_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int ni_670x_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int ni_670x_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int ni_670x_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int ni_670x_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
-static int ni_670x_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int ni_670x_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	int ret;
@@ -144,7 +145,8 @@ static int ni_670x_attach(struct comedi_device * dev, struct comedi_devconfig *
 
 	printk("comedi%d: ni_670x: ", dev->minor);
 
-	if ((ret = alloc_private(dev, sizeof(struct ni_670x_private))) < 0)
+	ret = alloc_private(dev, sizeof(struct ni_670x_private));
+	if (ret < 0)
 		return ret;
 
 	ret = ni_670x_find_device(dev, it->options[0], it->options[1]);
@@ -205,7 +207,7 @@ static int ni_670x_attach(struct comedi_device * dev, struct comedi_devconfig *
 	return 1;
 }
 
-static int ni_670x_detach(struct comedi_device * dev)
+static int ni_670x_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: ni_670x: remove\n", dev->minor);
 
@@ -216,13 +218,13 @@ static int ni_670x_detach(struct comedi_device * dev)
 		mite_unsetup(devpriv->mite);
 
 	if (dev->irq)
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 
 	return 0;
 }
 
-static int ni_670x_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_670x_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
@@ -247,8 +249,8 @@ static int ni_670x_ao_winsn(struct comedi_device * dev, struct comedi_subdevice
 	return i;
 }
 
-static int ni_670x_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_670x_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
@@ -259,8 +261,8 @@ static int ni_670x_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice
 	return i;
 }
 
-static int ni_670x_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_670x_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -281,8 +283,8 @@ static int ni_670x_dio_insn_bits(struct comedi_device * dev, struct comedi_subde
 	return 2;
 }
 
-static int ni_670x_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_670x_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int chan = CR_CHAN(insn->chanspec);
 
@@ -308,7 +310,7 @@ static int ni_670x_dio_insn_config(struct comedi_device * dev, struct comedi_sub
 	return insn->n;
 }
 
-static int ni_670x_find_device(struct comedi_device * dev, int bus, int slot)
+static int ni_670x_find_device(struct comedi_device *dev, int bus, int slot)
 {
 	struct mite_struct *mite;
 	int i;
diff --git a/drivers/staging/comedi/drivers/ni_at_a2150.c b/drivers/staging/comedi/drivers/ni_at_a2150.c
index 5d45bf24a5e..45c6809031d 100644
--- a/drivers/staging/comedi/drivers/ni_at_a2150.c
+++ b/drivers/staging/comedi/drivers/ni_at_a2150.c
@@ -64,6 +64,7 @@ TRIG_WAKE_EOS
 
 */
 
+#include <linux/interrupt.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
@@ -73,10 +74,10 @@ TRIG_WAKE_EOS
 #include "comedi_fc.h"
 
 #define A2150_SIZE           28
-#define A2150_DMA_BUFFER_SIZE	0xff00	// size in bytes of dma buffer
+#define A2150_DMA_BUFFER_SIZE	0xff00	/*  size in bytes of dma buffer */
 
-//#define A2150_DEBUG   // enable debugging code
-#undef A2150_DEBUG		// disable debugging code
+/* #define A2150_DEBUG     enable debugging code */
+#undef A2150_DEBUG		/*  disable debugging code */
 
 /* Registers and bits */
 #define CONFIG_REG		0x0
@@ -85,48 +86,48 @@ TRIG_WAKE_EOS
 #define   CLOCK_SELECT_BITS(x)		(((x) & 0x3) << 3)
 #define   CLOCK_DIVISOR_BITS(x)		(((x) & 0x3) << 5)
 #define   CLOCK_MASK		(0xf << 3)
-#define   ENABLE0_BIT		0x80	// enable (don't internally ground) channels 0 and 1
-#define   ENABLE1_BIT		0x100	// enable (don't internally ground) channels 2 and 3
-#define   AC0_BIT		0x200	// ac couple channels 0,1
-#define   AC1_BIT		0x400	// ac couple channels 2,3
-#define   APD_BIT		0x800	// analog power down
-#define   DPD_BIT		0x1000	// digital power down
-#define TRIGGER_REG		0x2	// trigger config register
+#define   ENABLE0_BIT		0x80	/*  enable (don't internally ground) channels 0 and 1 */
+#define   ENABLE1_BIT		0x100	/*  enable (don't internally ground) channels 2 and 3 */
+#define   AC0_BIT		0x200	/*  ac couple channels 0,1 */
+#define   AC1_BIT		0x400	/*  ac couple channels 2,3 */
+#define   APD_BIT		0x800	/*  analog power down */
+#define   DPD_BIT		0x1000	/*  digital power down */
+#define TRIGGER_REG		0x2	/*  trigger config register */
 #define   POST_TRIGGER_BITS		0x2
 #define   DELAY_TRIGGER_BITS		0x3
-#define   HW_TRIG_EN		0x10	// enable hardware trigger
-#define FIFO_START_REG		0x6	// software start aquistion trigger
-#define FIFO_RESET_REG		0x8	// clears fifo + fifo flags
-#define FIFO_DATA_REG		0xa	// read data
-#define DMA_TC_CLEAR_REG		0xe	// clear dma terminal count interrupt
-#define STATUS_REG		0x12	// read only
-#define   FNE_BIT		0x1	// fifo not empty
-#define   OVFL_BIT		0x8	// fifo overflow
-#define   EDAQ_BIT		0x10	// end of aquisition interrupt
-#define   DCAL_BIT		0x20	// offset calibration in progress
-#define   INTR_BIT		0x40	// interrupt has occured
-#define   DMA_TC_BIT		0x80	// dma terminal count interrupt has occured
+#define   HW_TRIG_EN		0x10	/*  enable hardware trigger */
+#define FIFO_START_REG		0x6	/*  software start aquistion trigger */
+#define FIFO_RESET_REG		0x8	/*  clears fifo + fifo flags */
+#define FIFO_DATA_REG		0xa	/*  read data */
+#define DMA_TC_CLEAR_REG		0xe	/*  clear dma terminal count interrupt */
+#define STATUS_REG		0x12	/*  read only */
+#define   FNE_BIT		0x1	/*  fifo not empty */
+#define   OVFL_BIT		0x8	/*  fifo overflow */
+#define   EDAQ_BIT		0x10	/*  end of aquisition interrupt */
+#define   DCAL_BIT		0x20	/*  offset calibration in progress */
+#define   INTR_BIT		0x40	/*  interrupt has occured */
+#define   DMA_TC_BIT		0x80	/*  dma terminal count interrupt has occured */
 #define   ID_BITS(x)	(((x) >> 8) & 0x3)
-#define IRQ_DMA_CNTRL_REG		0x12	// write only
-#define   DMA_CHAN_BITS(x)		((x) & 0x7)	// sets dma channel
-#define   DMA_EN_BIT		0x8	// enables dma
-#define   IRQ_LVL_BITS(x)		(((x) & 0xf) << 4)	// sets irq level
-#define   FIFO_INTR_EN_BIT		0x100	// enable fifo interrupts
-#define   FIFO_INTR_FHF_BIT		0x200	// interrupt fifo half full
-#define   DMA_INTR_EN_BIT 		0x800	// enable interrupt on dma terminal count
-#define   DMA_DEM_EN_BIT	0x1000	// enables demand mode dma
+#define IRQ_DMA_CNTRL_REG		0x12	/*  write only */
+#define   DMA_CHAN_BITS(x)		((x) & 0x7)	/*  sets dma channel */
+#define   DMA_EN_BIT		0x8	/*  enables dma */
+#define   IRQ_LVL_BITS(x)		(((x) & 0xf) << 4)	/*  sets irq level */
+#define   FIFO_INTR_EN_BIT		0x100	/*  enable fifo interrupts */
+#define   FIFO_INTR_FHF_BIT		0x200	/*  interrupt fifo half full */
+#define   DMA_INTR_EN_BIT 		0x800	/*  enable interrupt on dma terminal count */
+#define   DMA_DEM_EN_BIT	0x1000	/*  enables demand mode dma */
 #define I8253_BASE_REG		0x14
 #define I8253_MODE_REG		0x17
-#define   HW_COUNT_DISABLE		0x30	// disable hardware counting of conversions
+#define   HW_COUNT_DISABLE		0x30	/*  disable hardware counting of conversions */
 
 struct a2150_board {
 	const char *name;
-	int clock[4];		// master clock periods, in nanoseconds
-	int num_clocks;		// number of available master clock speeds
-	int ai_speed;		// maximum conversion rate in nanoseconds
+	int clock[4];		/*  master clock periods, in nanoseconds */
+	int num_clocks;		/*  number of available master clock speeds */
+	int ai_speed;		/*  maximum conversion rate in nanoseconds */
 };
 
-//analog input range
+/* analog input range */
 static const struct comedi_lrange range_a2150 = {
 	1,
 	{
@@ -134,20 +135,20 @@ static const struct comedi_lrange range_a2150 = {
 		}
 };
 
-// enum must match board indices
+/* enum must match board indices */
 enum { a2150_c, a2150_s };
 static const struct a2150_board a2150_boards[] = {
 	{
-	      name:	"at-a2150c",
-	      clock:	{31250, 22676, 20833, 19531},
-	      num_clocks:4,
-	      ai_speed:19531,
+	.name = "at-a2150c",
+	.clock = {31250, 22676, 20833, 19531},
+	.num_clocks = 4,
+	.ai_speed = 19531,
 		},
 	{
-	      name:	"at-a2150s",
-	      clock:	{62500, 50000, 41667, 0},
-	      num_clocks:3,
-	      ai_speed:41667,
+	.name = "at-a2150s",
+	.clock = {62500, 50000, 41667, 0},
+	.num_clocks = 3,
+	.ai_speed = 41667,
 		},
 };
 
@@ -159,37 +160,37 @@ static const struct a2150_board a2150_boards[] = {
 struct a2150_private {
 
 	volatile unsigned int count;	/* number of data points left to be taken */
-	unsigned int dma;	// dma channel
-	s16 *dma_buffer;	// dma buffer
-	unsigned int dma_transfer_size;	// size in bytes of dma transfers
-	int irq_dma_bits;	// irq/dma register bits
-	int config_bits;	// config register bits
+	unsigned int dma;	/*  dma channel */
+	s16 *dma_buffer;	/*  dma buffer */
+	unsigned int dma_transfer_size;	/*  size in bytes of dma transfers */
+	int irq_dma_bits;	/*  irq/dma register bits */
+	int config_bits;	/*  config register bits */
 };
 
 
 #define devpriv ((struct a2150_private *)dev->private)
 
-static int a2150_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int a2150_detach(struct comedi_device * dev);
-static int a2150_cancel(struct comedi_device * dev, struct comedi_subdevice * s);
+static int a2150_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int a2150_detach(struct comedi_device *dev);
+static int a2150_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
 
 static struct comedi_driver driver_a2150 = {
-      driver_name:"ni_at_a2150",
-      module:THIS_MODULE,
-      attach:a2150_attach,
-      detach:a2150_detach,
+	.driver_name = "ni_at_a2150",
+	.module = THIS_MODULE,
+	.attach = a2150_attach,
+	.detach = a2150_detach,
 };
 
-static irqreturn_t a2150_interrupt(int irq, void *d PT_REGS_ARG);
-static int a2150_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd);
-static int a2150_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s);
-static int a2150_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int a2150_get_timing(struct comedi_device * dev, unsigned int *period,
+static irqreturn_t a2150_interrupt(int irq, void *d);
+static int a2150_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd);
+static int a2150_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
+static int a2150_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int a2150_get_timing(struct comedi_device *dev, unsigned int *period,
 	int flags);
-static int a2150_probe(struct comedi_device * dev);
-static int a2150_set_chanlist(struct comedi_device * dev, unsigned int start_channel,
+static int a2150_probe(struct comedi_device *dev);
+static int a2150_set_chanlist(struct comedi_device *dev, unsigned int start_channel,
 	unsigned int num_channels);
 /*
  * A convenient macro that defines init_module() and cleanup_module(),
@@ -199,17 +200,17 @@ COMEDI_INITCLEANUP(driver_a2150);
 
 #ifdef A2150_DEBUG
 
-static void ni_dump_regs(struct comedi_device * dev)
+static void ni_dump_regs(struct comedi_device *dev)
 {
-	rt_printk("config bits 0x%x\n", devpriv->config_bits);
-	rt_printk("irq dma bits 0x%x\n", devpriv->irq_dma_bits);
-	rt_printk("status bits 0x%x\n", inw(dev->iobase + STATUS_REG));
+	printk("config bits 0x%x\n", devpriv->config_bits);
+	printk("irq dma bits 0x%x\n", devpriv->irq_dma_bits);
+	printk("status bits 0x%x\n", inw(dev->iobase + STATUS_REG));
 }
 
 #endif
 
 /* interrupt service routine */
-static irqreturn_t a2150_interrupt(int irq, void *d PT_REGS_ARG)
+static irqreturn_t a2150_interrupt(int irq, void *d)
 {
 	int i;
 	int status;
@@ -226,7 +227,7 @@ static irqreturn_t a2150_interrupt(int irq, void *d PT_REGS_ARG)
 		comedi_error(dev, "premature interrupt");
 		return IRQ_HANDLED;
 	}
-	// initialize async here to make sure s is not NULL
+	/*  initialize async here to make sure s is not NULL */
 	async = s->async;
 	async->events = 0;
 	cmd = &async->cmd;
@@ -258,7 +259,7 @@ static irqreturn_t a2150_interrupt(int irq, void *d PT_REGS_ARG)
 	 * count and address get set correctly */
 	clear_dma_ff(devpriv->dma);
 
-	// figure out how many points to read
+	/*  figure out how many points to read */
 	max_points = devpriv->dma_transfer_size / sample_size;
 	/* residue is the number of points left to be done on the dma
 	 * transfer.  It should always be zero at this point unless
@@ -269,7 +270,7 @@ static irqreturn_t a2150_interrupt(int irq, void *d PT_REGS_ARG)
 	if (devpriv->count < num_points && cmd->stop_src == TRIG_COUNT)
 		num_points = devpriv->count;
 
-	// figure out how many points will be stored next time
+	/*  figure out how many points will be stored next time */
 	leftover = 0;
 	if (cmd->stop_src == TRIG_NONE) {
 		leftover = devpriv->dma_transfer_size / sample_size;
@@ -288,7 +289,7 @@ static irqreturn_t a2150_interrupt(int irq, void *d PT_REGS_ARG)
 	for (i = 0; i < num_points; i++) {
 		/* write data point to comedi buffer */
 		dpnt = devpriv->dma_buffer[i];
-		// convert from 2's complement to unsigned coding
+		/*  convert from 2's complement to unsigned coding */
 		dpnt ^= 0x8000;
 		cfc_write_to_buffer(s, dpnt);
 		if (cmd->stop_src == TRIG_COUNT) {
@@ -299,7 +300,7 @@ static irqreturn_t a2150_interrupt(int irq, void *d PT_REGS_ARG)
 			}
 		}
 	}
-	// re-enable  dma
+	/*  re-enable  dma */
 	if (leftover) {
 		set_dma_addr(devpriv->dma, virt_to_bus(devpriv->dma_buffer));
 		set_dma_count(devpriv->dma, leftover * sample_size);
@@ -317,14 +318,14 @@ static irqreturn_t a2150_interrupt(int irq, void *d PT_REGS_ARG)
 	return IRQ_HANDLED;
 }
 
-// probes board type, returns offset
-static int a2150_probe(struct comedi_device * dev)
+/* probes board type, returns offset */
+static int a2150_probe(struct comedi_device *dev)
 {
 	int status = inw(dev->iobase + STATUS_REG);
 	return ID_BITS(status);
 }
 
-static int a2150_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int a2150_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	unsigned long iobase = it->options[0];
@@ -365,12 +366,12 @@ static int a2150_attach(struct comedi_device * dev, struct comedi_devconfig * it
 
 	/* grab our IRQ */
 	if (irq) {
-		// check that irq is supported
+		/*  check that irq is supported */
 		if (irq < 3 || irq == 8 || irq == 13 || irq > 15) {
 			printk(" invalid irq line %u\n", irq);
 			return -EINVAL;
 		}
-		if (comedi_request_irq(irq, a2150_interrupt, 0,
+		if (request_irq(irq, a2150_interrupt, 0,
 				driver_a2150.driver_name, dev)) {
 			printk("unable to allocate irq %u\n", irq);
 			return -EINVAL;
@@ -378,7 +379,7 @@ static int a2150_attach(struct comedi_device * dev, struct comedi_devconfig * it
 		devpriv->irq_dma_bits |= IRQ_LVL_BITS(irq);
 		dev->irq = irq;
 	}
-	// initialize dma
+	/*  initialize dma */
 	if (dma) {
 		if (dma == 4 || dma > 7) {
 			printk(" invalid dma channel %u\n", dma);
@@ -424,20 +425,20 @@ static int a2150_attach(struct comedi_device * dev, struct comedi_devconfig * it
 	 * prevent hardware count from stopping aquisition */
 	outw(HW_COUNT_DISABLE, dev->iobase + I8253_MODE_REG);
 
-	// set card's irq and dma levels
+	/*  set card's irq and dma levels */
 	outw(devpriv->irq_dma_bits, dev->iobase + IRQ_DMA_CNTRL_REG);
 
-	// reset and sync adc clock circuitry
+	/*  reset and sync adc clock circuitry */
 	outw_p(DPD_BIT | APD_BIT, dev->iobase + CONFIG_REG);
 	outw_p(DPD_BIT, dev->iobase + CONFIG_REG);
-	// initialize configuration register
+	/*  initialize configuration register */
 	devpriv->config_bits = 0;
 	outw(devpriv->config_bits, dev->iobase + CONFIG_REG);
-	// wait until offset calibration is done, then enable analog inputs
+	/*  wait until offset calibration is done, then enable analog inputs */
 	for (i = 0; i < timeout; i++) {
 		if ((DCAL_BIT & inw(dev->iobase + STATUS_REG)) == 0)
 			break;
-		comedi_udelay(1000);
+		udelay(1000);
 	}
 	if (i == timeout) {
 		printk(" timed out waiting for offset calibration to complete\n");
@@ -449,19 +450,19 @@ static int a2150_attach(struct comedi_device * dev, struct comedi_devconfig * it
 	return 0;
 };
 
-static int a2150_detach(struct comedi_device * dev)
+static int a2150_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: %s: remove\n", dev->minor, driver_a2150.driver_name);
 
 	/* only free stuff if it has been allocated by _attach */
 	if (dev->iobase) {
-		// put board in power-down mode
+		/*  put board in power-down mode */
 		outw(APD_BIT | DPD_BIT, dev->iobase + CONFIG_REG);
 		release_region(dev->iobase, A2150_SIZE);
 	}
 
 	if (dev->irq)
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 	if (devpriv) {
 		if (devpriv->dma)
 			free_dma(devpriv->dma);
@@ -472,23 +473,23 @@ static int a2150_detach(struct comedi_device * dev)
 	return 0;
 };
 
-static int a2150_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int a2150_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
-	// disable dma on card
+	/*  disable dma on card */
 	devpriv->irq_dma_bits &= ~DMA_INTR_EN_BIT & ~DMA_EN_BIT;
 	outw(devpriv->irq_dma_bits, dev->iobase + IRQ_DMA_CNTRL_REG);
 
-	// disable computer's dma
+	/*  disable computer's dma */
 	disable_dma(devpriv->dma);
 
-	// clear fifo and reset triggering circuitry
+	/*  clear fifo and reset triggering circuitry */
 	outw(0, dev->iobase + FIFO_RESET_REG);
 
 	return 0;
 }
 
-static int a2150_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int a2150_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	int tmp;
@@ -582,7 +583,7 @@ static int a2150_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice
 	if (err)
 		return 4;
 
-	// check channel/gain list against card's limitations
+	/*  check channel/gain list against card's limitations */
 	if (cmd->chanlist) {
 		startChan = CR_CHAN(cmd->chanlist[0]);
 		for (i = 1; i < cmd->chanlist_len; i++) {
@@ -617,7 +618,7 @@ static int a2150_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice
 	return 0;
 }
 
-static int a2150_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int a2150_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct comedi_async *async = s->async;
 	struct comedi_cmd *cmd = &async->cmd;
@@ -635,7 +636,7 @@ static int a2150_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 			" dma incompatible with hard real-time interrupt (TRIG_RT), aborting");
 		return -1;
 	}
-	// clear fifo and reset triggering circuitry
+	/*  clear fifo and reset triggering circuitry */
 	outw(0, dev->iobase + FIFO_RESET_REG);
 
 	/* setup chanlist */
@@ -643,7 +644,7 @@ static int a2150_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 			cmd->chanlist_len) < 0)
 		return -1;
 
-	// setup ac/dc coupling
+	/*  setup ac/dc coupling */
 	if (CR_AREF(cmd->chanlist[0]) == AREF_OTHER)
 		devpriv->config_bits |= AC0_BIT;
 	else
@@ -653,23 +654,23 @@ static int a2150_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 	else
 		devpriv->config_bits &= ~AC1_BIT;
 
-	// setup timing
+	/*  setup timing */
 	a2150_get_timing(dev, &cmd->scan_begin_arg, cmd->flags);
 
-	// send timing, channel, config bits
+	/*  send timing, channel, config bits */
 	outw(devpriv->config_bits, dev->iobase + CONFIG_REG);
 
-	// initialize number of samples remaining
+	/*  initialize number of samples remaining */
 	devpriv->count = cmd->stop_arg * cmd->chanlist_len;
 
-	// enable computer's dma
+	/*  enable computer's dma */
 	lock_flags = claim_dma_lock();
 	disable_dma(devpriv->dma);
 	/* clear flip-flop to make sure 2-byte registers for
 	 * count and address get set correctly */
 	clear_dma_ff(devpriv->dma);
 	set_dma_addr(devpriv->dma, virt_to_bus(devpriv->dma_buffer));
-	// set size of transfer to fill in 1/3 second
+	/*  set size of transfer to fill in 1/3 second */
 #define ONE_THIRD_SECOND 333333333
 	devpriv->dma_transfer_size =
 		sizeof(devpriv->dma_buffer[0]) * cmd->chanlist_len *
@@ -688,36 +689,36 @@ static int a2150_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 	 * one spurious interrupt that has been happening */
 	outw(0x00, dev->iobase + DMA_TC_CLEAR_REG);
 
-	// enable dma on card
+	/*  enable dma on card */
 	devpriv->irq_dma_bits |= DMA_INTR_EN_BIT | DMA_EN_BIT;
 	outw(devpriv->irq_dma_bits, dev->iobase + IRQ_DMA_CNTRL_REG);
 
-	// may need to wait 72 sampling periods if timing was changed
+	/*  may need to wait 72 sampling periods if timing was changed */
 	i8254_load(dev->iobase + I8253_BASE_REG, 0, 2, 72, 0);
 
-	// setup start triggering
+	/*  setup start triggering */
 	trigger_bits = 0;
-	// decide if we need to wait 72 periods for valid data
+	/*  decide if we need to wait 72 periods for valid data */
 	if (cmd->start_src == TRIG_NOW &&
 		(old_config_bits & CLOCK_MASK) !=
 		(devpriv->config_bits & CLOCK_MASK)) {
-		// set trigger source to delay trigger
+		/*  set trigger source to delay trigger */
 		trigger_bits |= DELAY_TRIGGER_BITS;
 	} else {
-		// otherwise no delay
+		/*  otherwise no delay */
 		trigger_bits |= POST_TRIGGER_BITS;
 	}
-	// enable external hardware trigger
+	/*  enable external hardware trigger */
 	if (cmd->start_src == TRIG_EXT) {
 		trigger_bits |= HW_TRIG_EN;
 	} else if (cmd->start_src == TRIG_OTHER) {
-		// XXX add support for level/slope start trigger using TRIG_OTHER
+		/*  XXX add support for level/slope start trigger using TRIG_OTHER */
 		comedi_error(dev, "you shouldn't see this?");
 	}
-	// send trigger config bits
+	/*  send trigger config bits */
 	outw(trigger_bits, dev->iobase + TRIGGER_REG);
 
-	// start aquisition for soft trigger
+	/*  start aquisition for soft trigger */
 	if (cmd->start_src == TRIG_NOW) {
 		outw(0, dev->iobase + FIFO_START_REG);
 	}
@@ -728,35 +729,35 @@ static int a2150_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 	return 0;
 }
 
-static int a2150_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int a2150_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int i, n;
 	static const int timeout = 100000;
 	static const int filter_delay = 36;
 
-	// clear fifo and reset triggering circuitry
+	/*  clear fifo and reset triggering circuitry */
 	outw(0, dev->iobase + FIFO_RESET_REG);
 
 	/* setup chanlist */
 	if (a2150_set_chanlist(dev, CR_CHAN(insn->chanspec), 1) < 0)
 		return -1;
 
-	// set dc coupling
+	/*  set dc coupling */
 	devpriv->config_bits &= ~AC0_BIT;
 	devpriv->config_bits &= ~AC1_BIT;
 
-	// send timing, channel, config bits
+	/*  send timing, channel, config bits */
 	outw(devpriv->config_bits, dev->iobase + CONFIG_REG);
 
-	// disable dma on card
+	/*  disable dma on card */
 	devpriv->irq_dma_bits &= ~DMA_INTR_EN_BIT & ~DMA_EN_BIT;
 	outw(devpriv->irq_dma_bits, dev->iobase + IRQ_DMA_CNTRL_REG);
 
-	// setup start triggering
+	/*  setup start triggering */
 	outw(0, dev->iobase + TRIGGER_REG);
 
-	// start aquisition for soft trigger
+	/*  start aquisition for soft trigger */
 	outw(0, dev->iobase + FIFO_START_REG);
 
 	/* there is a 35.6 sample delay for data to get through the antialias filter */
@@ -764,7 +765,7 @@ static int a2150_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice *
 		for (i = 0; i < timeout; i++) {
 			if (inw(dev->iobase + STATUS_REG) & FNE_BIT)
 				break;
-			comedi_udelay(1);
+			udelay(1);
 		}
 		if (i == timeout) {
 			comedi_error(dev, "timeout");
@@ -773,12 +774,12 @@ static int a2150_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice *
 		inw(dev->iobase + FIFO_DATA_REG);
 	}
 
-	// read data
+	/*  read data */
 	for (n = 0; n < insn->n; n++) {
 		for (i = 0; i < timeout; i++) {
 			if (inw(dev->iobase + STATUS_REG) & FNE_BIT)
 				break;
-			comedi_udelay(1);
+			udelay(1);
 		}
 		if (i == timeout) {
 			comedi_error(dev, "timeout");
@@ -789,12 +790,12 @@ static int a2150_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice *
 #endif
 		data[n] = inw(dev->iobase + FIFO_DATA_REG);
 #ifdef A2150_DEBUG
-		rt_printk(" data is %i\n", data[n]);
+		printk(" data is %i\n", data[n]);
 #endif
 		data[n] ^= 0x8000;
 	}
 
-	// clear fifo and reset triggering circuitry
+	/*  clear fifo and reset triggering circuitry */
 	outw(0, dev->iobase + FIFO_RESET_REG);
 
 	return n;
@@ -802,14 +803,14 @@ static int a2150_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice *
 
 /* sets bits in devpriv->clock_bits to nearest approximation of requested period,
  * adjusts requested period to actual timing. */
-static int a2150_get_timing(struct comedi_device * dev, unsigned int *period,
+static int a2150_get_timing(struct comedi_device *dev, unsigned int *period,
 	int flags)
 {
 	int lub, glb, temp;
 	int lub_divisor_shift, lub_index, glb_divisor_shift, glb_index;
 	int i, j;
 
-	// initialize greatest lower and least upper bounds
+	/*  initialize greatest lower and least upper bounds */
 	lub_divisor_shift = 3;
 	lub_index = 0;
 	lub = thisboard->clock[lub_index] * (1 << lub_divisor_shift);
@@ -817,19 +818,19 @@ static int a2150_get_timing(struct comedi_device * dev, unsigned int *period,
 	glb_index = thisboard->num_clocks - 1;
 	glb = thisboard->clock[glb_index] * (1 << glb_divisor_shift);
 
-	// make sure period is in available range
+	/*  make sure period is in available range */
 	if (*period < glb)
 		*period = glb;
 	if (*period > lub)
 		*period = lub;
 
-	// we can multiply period by 1, 2, 4, or 8, using (1 << i)
+	/*  we can multiply period by 1, 2, 4, or 8, using (1 << i) */
 	for (i = 0; i < 4; i++) {
-		// there are a maximum of 4 master clocks
+		/*  there are a maximum of 4 master clocks */
 		for (j = 0; j < thisboard->num_clocks; j++) {
-			// temp is the period in nanosec we are evaluating
+			/*  temp is the period in nanosec we are evaluating */
 			temp = thisboard->clock[j] * (1 << i);
-			// if it is the best match yet
+			/*  if it is the best match yet */
 			if (temp < lub && temp >= *period) {
 				lub_divisor_shift = i;
 				lub_index = j;
@@ -846,7 +847,7 @@ static int a2150_get_timing(struct comedi_device * dev, unsigned int *period,
 	switch (flags) {
 	case TRIG_ROUND_NEAREST:
 	default:
-		// if least upper bound is better approximation
+		/*  if least upper bound is better approximation */
 		if (lub - *period < *period - glb) {
 			*period = lub;
 		} else {
@@ -861,7 +862,7 @@ static int a2150_get_timing(struct comedi_device * dev, unsigned int *period,
 		break;
 	}
 
-	// set clock bits for config register appropriately
+	/*  set clock bits for config register appropriately */
 	devpriv->config_bits &= ~CLOCK_MASK;
 	if (*period == lub) {
 		devpriv->config_bits |=
@@ -876,7 +877,7 @@ static int a2150_get_timing(struct comedi_device * dev, unsigned int *period,
 	return 0;
 }
 
-static int a2150_set_chanlist(struct comedi_device * dev, unsigned int start_channel,
+static int a2150_set_chanlist(struct comedi_device *dev, unsigned int start_channel,
 	unsigned int num_channels)
 {
 	if (start_channel + num_channels > 4)
diff --git a/drivers/staging/comedi/drivers/ni_at_ao.c b/drivers/staging/comedi/drivers/ni_at_ao.c
index 2cc46b67258..4e8bf9ed167 100644
--- a/drivers/staging/comedi/drivers/ni_at_ao.c
+++ b/drivers/staging/comedi/drivers/ni_at_ao.c
@@ -158,12 +158,12 @@ struct atao_board {
 
 static const struct atao_board atao_boards[] = {
 	{
-	      name:	"ai-ao-6",
-	      n_ao_chans:6,
+	.name = "ai-ao-6",
+	.n_ao_chans = 6,
 		},
 	{
-	      name:	"ai-ao-10",
-	      n_ao_chans:10,
+	.name = "ai-ao-10",
+	.n_ao_chans = 10,
 		},
 };
 
@@ -181,36 +181,36 @@ struct atao_private {
 
 #define devpriv ((struct atao_private *)dev->private)
 
-static int atao_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int atao_detach(struct comedi_device * dev);
+static int atao_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int atao_detach(struct comedi_device *dev);
 static struct comedi_driver driver_atao = {
-      driver_name:"ni_at_ao",
-      module:THIS_MODULE,
-      attach:atao_attach,
-      detach:atao_detach,
-      board_name:&atao_boards[0].name,
-      offset:sizeof(struct atao_board),
-      num_names:sizeof(atao_boards) / sizeof(struct atao_board),
+	.driver_name = "ni_at_ao",
+	.module = THIS_MODULE,
+	.attach = atao_attach,
+	.detach = atao_detach,
+	.board_name = &atao_boards[0].name,
+	.offset = sizeof(struct atao_board),
+	.num_names = ARRAY_SIZE(atao_boards),
 };
 
 COMEDI_INITCLEANUP(driver_atao);
 
-static void atao_reset(struct comedi_device * dev);
-
-static int atao_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int atao_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int atao_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int atao_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int atao_calib_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int atao_calib_insn_write(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-
-static int atao_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static void atao_reset(struct comedi_device *dev);
+
+static int atao_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int atao_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int atao_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int atao_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int atao_calib_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int atao_calib_insn_write(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+
+static int atao_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	unsigned long iobase;
@@ -229,7 +229,7 @@ static int atao_attach(struct comedi_device * dev, struct comedi_devconfig * it)
 	}
 	dev->iobase = iobase;
 
-	//dev->board_ptr = atao_probe(dev);
+	/* dev->board_ptr = atao_probe(dev); */
 
 	dev->board_name = thisboard->name;
 
@@ -273,7 +273,7 @@ static int atao_attach(struct comedi_device * dev, struct comedi_devconfig * it)
 
 	s = dev->subdevices + 3;
 	/* eeprom subdevice */
-	//s->type=COMEDI_SUBD_EEPROM;
+	/* s->type=COMEDI_SUBD_EEPROM; */
 	s->type = COMEDI_SUBD_UNUSED;
 
 	atao_reset(dev);
@@ -283,7 +283,7 @@ static int atao_attach(struct comedi_device * dev, struct comedi_devconfig * it)
 	return 0;
 }
 
-static int atao_detach(struct comedi_device * dev)
+static int atao_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: atao: remove\n", dev->minor);
 
@@ -293,7 +293,7 @@ static int atao_detach(struct comedi_device * dev)
 	return 0;
 }
 
-static void atao_reset(struct comedi_device * dev)
+static void atao_reset(struct comedi_device *dev)
 {
 	/* This is the reset sequence described in the manual */
 
@@ -323,8 +323,8 @@ static void atao_reset(struct comedi_device * dev)
 	outw(devpriv->cfg1, dev->iobase + ATAO_CFG1);
 }
 
-static int atao_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int atao_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
@@ -347,8 +347,8 @@ static int atao_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s
 	return i;
 }
 
-static int atao_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int atao_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
@@ -359,8 +359,8 @@ static int atao_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s
 	return i;
 }
 
-static int atao_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int atao_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -376,8 +376,8 @@ static int atao_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevic
 	return 2;
 }
 
-static int atao_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int atao_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int chan = CR_CHAN(insn->chanspec);
 	unsigned int mask, bit;
@@ -421,8 +421,8 @@ static int atao_dio_insn_config(struct comedi_device * dev, struct comedi_subdev
  * DACs.  It is not explicitly stated in the manual how to access
  * the caldacs, but we can guess.
  */
-static int atao_calib_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int atao_calib_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	for (i = 0; i < insn->n; i++) {
@@ -431,8 +431,8 @@ static int atao_calib_insn_read(struct comedi_device * dev, struct comedi_subdev
 	return insn->n;
 }
 
-static int atao_calib_insn_write(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int atao_calib_insn_write(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int bitstring, bit;
 	unsigned int chan = CR_CHAN(insn->chanspec);
diff --git a/drivers/staging/comedi/drivers/ni_atmio.c b/drivers/staging/comedi/drivers/ni_atmio.c
index fcc38535afc..8839447538f 100644
--- a/drivers/staging/comedi/drivers/ni_atmio.c
+++ b/drivers/staging/comedi/drivers/ni_atmio.c
@@ -93,6 +93,7 @@ are not supported.
 
 */
 
+#include <linux/interrupt.h>
 #include "../comedidev.h"
 
 #include <linux/delay.h>
@@ -114,156 +115,156 @@ are not supported.
 
 #define MAX_N_CALDACS 32
 
-static const ni_board ni_boards[] = {
-      {device_id:44,
-	      isapnp_id:0x0000,/* XXX unknown */
-	      name:	"at-mio-16e-1",
-	      n_adchan:16,
-	      adbits:	12,
-	      ai_fifo_depth:8192,
-	      alwaysdither:0,
-	      gainlkup:ai_gain_16,
-	      ai_speed:800,
-	      n_aochan:2,
-	      aobits:	12,
-	      ao_fifo_depth:2048,
+static const struct ni_board_struct ni_boards[] = {
+	{.device_id = 44,
+	.isapnp_id = 0x0000,/* XXX unknown */
+	.name = "at-mio-16e-1",
+	.n_adchan = 16,
+	.adbits = 12,
+	.ai_fifo_depth = 8192,
+	.alwaysdither = 0,
+	.gainlkup = ai_gain_16,
+	.ai_speed = 800,
+	.n_aochan = 2,
+	.aobits = 12,
+	.ao_fifo_depth = 2048,
 			.ao_range_table = &range_ni_E_ao_ext,
-	      ao_unipolar:1,
-	      ao_speed:1000,
-	      has_8255:0,
+	.ao_unipolar = 1,
+	.ao_speed = 1000,
+	.has_8255 = 0,
 			.num_p0_dio_channels = 8,
-	      caldac:	{mb88341},
+	.caldac = {mb88341},
 		},
-      {device_id:25,
-	      isapnp_id:0x1900,
-	      name:	"at-mio-16e-2",
-	      n_adchan:16,
-	      adbits:	12,
-	      ai_fifo_depth:2048,
-	      alwaysdither:0,
-	      gainlkup:ai_gain_16,
-	      ai_speed:2000,
-	      n_aochan:2,
-	      aobits:	12,
-	      ao_fifo_depth:2048,
+	{.device_id = 25,
+	.isapnp_id = 0x1900,
+	.name = "at-mio-16e-2",
+	.n_adchan = 16,
+	.adbits = 12,
+	.ai_fifo_depth = 2048,
+	.alwaysdither = 0,
+	.gainlkup = ai_gain_16,
+	.ai_speed = 2000,
+	.n_aochan = 2,
+	.aobits = 12,
+	.ao_fifo_depth = 2048,
 			.ao_range_table = &range_ni_E_ao_ext,
-	      ao_unipolar:1,
-	      ao_speed:1000,
-	      has_8255:0,
+	.ao_unipolar = 1,
+	.ao_speed = 1000,
+	.has_8255 = 0,
 			.num_p0_dio_channels = 8,
-	      caldac:	{mb88341},
+	.caldac = {mb88341},
 		},
-      {device_id:36,
-	      isapnp_id:0x2400,
-	      name:	"at-mio-16e-10",
-	      n_adchan:16,
-	      adbits:	12,
-	      ai_fifo_depth:512,
-	      alwaysdither:0,
-	      gainlkup:ai_gain_16,
-	      ai_speed:10000,
-	      n_aochan:2,
-	      aobits:	12,
-	      ao_fifo_depth:0,
+	{.device_id = 36,
+	.isapnp_id = 0x2400,
+	.name = "at-mio-16e-10",
+	.n_adchan = 16,
+	.adbits = 12,
+	.ai_fifo_depth = 512,
+	.alwaysdither = 0,
+	.gainlkup = ai_gain_16,
+	.ai_speed = 10000,
+	.n_aochan = 2,
+	.aobits = 12,
+	.ao_fifo_depth = 0,
 			.ao_range_table = &range_ni_E_ao_ext,
-	      ao_unipolar:1,
-	      ao_speed:10000,
+	.ao_unipolar = 1,
+	.ao_speed = 10000,
 			.num_p0_dio_channels = 8,
-	      caldac:	{ad8804_debug},
-	      has_8255:0,
+	.caldac = {ad8804_debug},
+	.has_8255 = 0,
 		},
-      {device_id:37,
-	      isapnp_id:0x2500,
-	      name:	"at-mio-16de-10",
-	      n_adchan:16,
-	      adbits:	12,
-	      ai_fifo_depth:512,
-	      alwaysdither:0,
-	      gainlkup:ai_gain_16,
-	      ai_speed:10000,
-	      n_aochan:2,
-	      aobits:	12,
-	      ao_fifo_depth:0,
+	{.device_id = 37,
+	.isapnp_id = 0x2500,
+	.name = "at-mio-16de-10",
+	.n_adchan = 16,
+	.adbits = 12,
+	.ai_fifo_depth = 512,
+	.alwaysdither = 0,
+	.gainlkup = ai_gain_16,
+	.ai_speed = 10000,
+	.n_aochan = 2,
+	.aobits = 12,
+	.ao_fifo_depth = 0,
 			.ao_range_table = &range_ni_E_ao_ext,
-	      ao_unipolar:1,
-	      ao_speed:10000,
+	.ao_unipolar = 1,
+	.ao_speed = 10000,
 			.num_p0_dio_channels = 8,
-	      caldac:	{ad8804_debug},
-	      has_8255:1,
+	.caldac = {ad8804_debug},
+	.has_8255 = 1,
 		},
-      {device_id:38,
-	      isapnp_id:0x2600,
-	      name:	"at-mio-64e-3",
-	      n_adchan:64,
-	      adbits:	12,
-	      ai_fifo_depth:2048,
-	      alwaysdither:0,
-	      gainlkup:ai_gain_16,
-	      ai_speed:2000,
-	      n_aochan:2,
-	      aobits:	12,
-	      ao_fifo_depth:2048,
+	{.device_id = 38,
+	.isapnp_id = 0x2600,
+	.name = "at-mio-64e-3",
+	.n_adchan = 64,
+	.adbits = 12,
+	.ai_fifo_depth = 2048,
+	.alwaysdither = 0,
+	.gainlkup = ai_gain_16,
+	.ai_speed = 2000,
+	.n_aochan = 2,
+	.aobits = 12,
+	.ao_fifo_depth = 2048,
 			.ao_range_table = &range_ni_E_ao_ext,
-	      ao_unipolar:1,
-	      ao_speed:1000,
-	      has_8255:0,
+	.ao_unipolar = 1,
+	.ao_speed = 1000,
+	.has_8255 = 0,
 			.num_p0_dio_channels = 8,
-	      caldac:	{ad8804_debug},
+	.caldac = {ad8804_debug},
 		},
-      {device_id:39,
-	      isapnp_id:0x2700,
-	      name:	"at-mio-16xe-50",
-	      n_adchan:16,
-	      adbits:	16,
-	      ai_fifo_depth:512,
-	      alwaysdither:1,
-	      gainlkup:ai_gain_8,
-	      ai_speed:50000,
-	      n_aochan:2,
-	      aobits:	12,
-	      ao_fifo_depth:0,
+	{.device_id = 39,
+	.isapnp_id = 0x2700,
+	.name = "at-mio-16xe-50",
+	.n_adchan = 16,
+	.adbits = 16,
+	.ai_fifo_depth = 512,
+	.alwaysdither = 1,
+	.gainlkup = ai_gain_8,
+	.ai_speed = 50000,
+	.n_aochan = 2,
+	.aobits = 12,
+	.ao_fifo_depth = 0,
 			.ao_range_table = &range_bipolar10,
-	      ao_unipolar:0,
-	      ao_speed:50000,
+	.ao_unipolar = 0,
+	.ao_speed = 50000,
 			.num_p0_dio_channels = 8,
-	      caldac:	{dac8800, dac8043},
-	      has_8255:0,
+	.caldac = {dac8800, dac8043},
+	.has_8255 = 0,
 		},
-      {device_id:50,
-	      isapnp_id:0x0000,/* XXX unknown */
-	      name:	"at-mio-16xe-10",
-	      n_adchan:16,
-	      adbits:	16,
-	      ai_fifo_depth:512,
-	      alwaysdither:1,
-	      gainlkup:ai_gain_14,
-	      ai_speed:10000,
-	      n_aochan:2,
-	      aobits:	16,
-	      ao_fifo_depth:2048,
+	{.device_id = 50,
+	.isapnp_id = 0x0000,/* XXX unknown */
+	.name = "at-mio-16xe-10",
+	.n_adchan = 16,
+	.adbits = 16,
+	.ai_fifo_depth = 512,
+	.alwaysdither = 1,
+	.gainlkup = ai_gain_14,
+	.ai_speed = 10000,
+	.n_aochan = 2,
+	.aobits = 16,
+	.ao_fifo_depth = 2048,
 			.ao_range_table = &range_ni_E_ao_ext,
-	      ao_unipolar:1,
-	      ao_speed:1000,
+	.ao_unipolar = 1,
+	.ao_speed = 1000,
 			.num_p0_dio_channels = 8,
-	      caldac:	{dac8800, dac8043, ad8522},
-	      has_8255:0,
+	.caldac = {dac8800, dac8043, ad8522},
+	.has_8255 = 0,
 		},
-      {device_id:51,
-	      isapnp_id:0x0000,/* XXX unknown */
-	      name:	"at-ai-16xe-10",
-	      n_adchan:16,
-	      adbits:	16,
-	      ai_fifo_depth:512,
-	      alwaysdither:1,	/* unknown */
-	      gainlkup:ai_gain_14,
-	      ai_speed:10000,
-	      n_aochan:0,
-	      aobits:	0,
-	      ao_fifo_depth:0,
-	      ao_unipolar:0,
+	{.device_id = 51,
+	.isapnp_id = 0x0000,/* XXX unknown */
+	.name = "at-ai-16xe-10",
+	.n_adchan = 16,
+	.adbits = 16,
+	.ai_fifo_depth = 512,
+	.alwaysdither = 1,	/* unknown */
+	.gainlkup = ai_gain_14,
+	.ai_speed = 10000,
+	.n_aochan = 0,
+	.aobits = 0,
+	.ao_fifo_depth = 0,
+	.ao_unipolar = 0,
 			.num_p0_dio_channels = 8,
-	      caldac:	{dac8800, dac8043, ad8522},
-	      has_8255:0,
+	.caldac = {dac8800, dac8043, ad8522},
+	.has_8255 = 0,
 		}
 };
 
@@ -276,18 +277,19 @@ static const int ni_irqpin[] =
 
 #define NI_E_IRQ_FLAGS		0
 
-typedef struct {
+struct ni_private {
 	struct pnp_dev *isapnp_dev;
- NI_PRIVATE_COMMON} ni_private;
-#define devpriv ((ni_private *)dev->private)
+	NI_PRIVATE_COMMON
+};
+#define devpriv ((struct ni_private *)dev->private)
 
 /* How we access registers */
 
-#define ni_writel(a,b)		(outl((a),(b)+dev->iobase))
+#define ni_writel(a, b)		(outl((a), (b)+dev->iobase))
 #define ni_readl(a)		(inl((a)+dev->iobase))
-#define ni_writew(a,b)		(outw((a),(b)+dev->iobase))
+#define ni_writew(a, b)		(outw((a), (b)+dev->iobase))
 #define ni_readw(a)		(inw((a)+dev->iobase))
-#define ni_writeb(a,b)		(outb((a),(b)+dev->iobase))
+#define ni_writeb(a, b)		(outb((a), (b)+dev->iobase))
 #define ni_readb(a)		(inb((a)+dev->iobase))
 
 /* How we access windowed registers */
@@ -296,72 +298,72 @@ typedef struct {
  * read/written directly in the I/O space of the board.  The
  * AT-MIO devices map the low 8 STC registers to iobase+addr*2. */
 
-static void ni_atmio_win_out(struct comedi_device * dev, uint16_t data, int addr)
+static void ni_atmio_win_out(struct comedi_device *dev, uint16_t data, int addr)
 {
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&devpriv->window_lock, flags);
+	spin_lock_irqsave(&devpriv->window_lock, flags);
 	if ((addr) < 8) {
 		ni_writew(data, addr * 2);
 	} else {
 		ni_writew(addr, Window_Address);
 		ni_writew(data, Window_Data);
 	}
-	comedi_spin_unlock_irqrestore(&devpriv->window_lock, flags);
+	spin_unlock_irqrestore(&devpriv->window_lock, flags);
 }
 
-static uint16_t ni_atmio_win_in(struct comedi_device * dev, int addr)
+static uint16_t ni_atmio_win_in(struct comedi_device *dev, int addr)
 {
 	unsigned long flags;
 	uint16_t ret;
 
-	comedi_spin_lock_irqsave(&devpriv->window_lock, flags);
+	spin_lock_irqsave(&devpriv->window_lock, flags);
 	if (addr < 8) {
 		ret = ni_readw(addr * 2);
 	} else {
 		ni_writew(addr, Window_Address);
 		ret = ni_readw(Window_Data);
 	}
-	comedi_spin_unlock_irqrestore(&devpriv->window_lock, flags);
+	spin_unlock_irqrestore(&devpriv->window_lock, flags);
 
 	return ret;
 }
 
 static struct pnp_device_id device_ids[] = {
-	{.id = "NIC1900",.driver_data = 0},
-	{.id = "NIC2400",.driver_data = 0},
-	{.id = "NIC2500",.driver_data = 0},
-	{.id = "NIC2600",.driver_data = 0},
-	{.id = "NIC2700",.driver_data = 0},
+	{.id = "NIC1900", .driver_data = 0},
+	{.id = "NIC2400", .driver_data = 0},
+	{.id = "NIC2500", .driver_data = 0},
+	{.id = "NIC2600", .driver_data = 0},
+	{.id = "NIC2700", .driver_data = 0},
 	{.id = ""}
 };
 
 MODULE_DEVICE_TABLE(pnp, device_ids);
 
-static int ni_atmio_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int ni_atmio_detach(struct comedi_device * dev);
+static int ni_atmio_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int ni_atmio_detach(struct comedi_device *dev);
 static struct comedi_driver driver_atmio = {
-      driver_name:"ni_atmio",
-      module:THIS_MODULE,
-      attach:ni_atmio_attach,
-      detach:ni_atmio_detach,
+	.driver_name = "ni_atmio",
+	.module = THIS_MODULE,
+	.attach = ni_atmio_attach,
+	.detach = ni_atmio_detach,
 };
 
 COMEDI_INITCLEANUP(driver_atmio);
 
 #include "ni_mio_common.c"
 
-static int ni_getboardtype(struct comedi_device * dev);
+static int ni_getboardtype(struct comedi_device *dev);
 
 /* clean up allocated resources */
-static int ni_atmio_detach(struct comedi_device * dev)
+static int ni_atmio_detach(struct comedi_device *dev)
 {
 	mio_common_detach(dev);
 
 	if (dev->iobase)
 		release_region(dev->iobase, NI_SIZE);
 	if (dev->irq) {
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 	}
 	if (devpriv->isapnp_dev)
 		pnp_device_detach(devpriv->isapnp_dev);
@@ -404,7 +406,7 @@ static int ni_isapnp_find_board(struct pnp_dev **dev)
 	return 0;
 }
 
-static int ni_atmio_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int ni_atmio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct pnp_dev *isapnp_dev;
 	int ret;
@@ -413,8 +415,10 @@ static int ni_atmio_attach(struct comedi_device * dev, struct comedi_devconfig *
 	unsigned int irq;
 
 	/* allocate private area */
-	if ((ret = ni_alloc_private(dev)) < 0)
+	ret = ni_alloc_private(dev);
+	if (ret < 0)
 		return ret;
+
 	devpriv->stc_writew = &ni_atmio_win_out;
 	devpriv->stc_readw = &ni_atmio_win_in;
 	devpriv->stc_writel = &win_out2;
@@ -475,8 +479,10 @@ static int ni_atmio_attach(struct comedi_device * dev, struct comedi_devconfig *
 			return -EINVAL;
 		}
 		printk(" ( irq = %u )", irq);
-		if ((ret = comedi_request_irq(irq, ni_E_interrupt,
-					NI_E_IRQ_FLAGS, "ni_atmio", dev)) < 0) {
+		ret = request_irq(irq, ni_E_interrupt, NI_E_IRQ_FLAGS,
+				  "ni_atmio", dev);
+
+		if (ret < 0) {
 			printk(" irq not available\n");
 			return -EINVAL;
 		}
@@ -485,14 +491,15 @@ static int ni_atmio_attach(struct comedi_device * dev, struct comedi_devconfig *
 
 	/* generic E series stuff in ni_mio_common.c */
 
-	if ((ret = ni_E_init(dev, it)) < 0) {
+	ret = ni_E_init(dev, it);
+	if (ret < 0) {
 		return ret;
 	}
 
 	return 0;
 }
 
-static int ni_getboardtype(struct comedi_device * dev)
+static int ni_getboardtype(struct comedi_device *dev)
 {
 	int device_id = ni_read_eeprom(dev, 511);
 	int i;
diff --git a/drivers/staging/comedi/drivers/ni_atmio16d.c b/drivers/staging/comedi/drivers/ni_atmio16d.c
index 35fcd172af2..1a8c2ab20d3 100644
--- a/drivers/staging/comedi/drivers/ni_atmio16d.c
+++ b/drivers/staging/comedi/drivers/ni_atmio16d.c
@@ -35,6 +35,7 @@ Devices: [National Instruments] AT-MIO-16 (atmio16), AT-MIO-16D (atmio16d)
  *
  */
 
+#include <linux/interrupt.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
@@ -111,12 +112,12 @@ struct atmio16_board_t {
 
 static const struct atmio16_board_t atmio16_boards[] = {
 	{
-	      name:	"atmio16",
-	      has_8255:0,
+	.name = "atmio16",
+	.has_8255 = 0,
 		},
 	{
-	      name:	"atmio16d",
-	      has_8255:1,
+	.name = "atmio16d",
+	.has_8255 = 1,
 		},
 };
 
@@ -125,25 +126,25 @@ static const struct atmio16_board_t atmio16_boards[] = {
 #define boardtype ((const struct atmio16_board_t *)dev->board_ptr)
 
 /* function prototypes */
-static int atmio16d_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int atmio16d_detach(struct comedi_device * dev);
-static irqreturn_t atmio16d_interrupt(int irq, void *d PT_REGS_ARG);
-static int atmio16d_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd);
-static int atmio16d_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s);
-static int atmio16d_ai_cancel(struct comedi_device * dev, struct comedi_subdevice * s);
-static void reset_counters(struct comedi_device * dev);
-static void reset_atmio16d(struct comedi_device * dev);
+static int atmio16d_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int atmio16d_detach(struct comedi_device *dev);
+static irqreturn_t atmio16d_interrupt(int irq, void *d);
+static int atmio16d_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd);
+static int atmio16d_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
+static int atmio16d_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
+static void reset_counters(struct comedi_device *dev);
+static void reset_atmio16d(struct comedi_device *dev);
 
 /* main driver struct */
 static struct comedi_driver driver_atmio16d = {
-      driver_name:"atmio16",
-      module:THIS_MODULE,
-      attach:atmio16d_attach,
-      detach:atmio16d_detach,
-      board_name:&atmio16_boards[0].name,
-      num_names:n_atmio16_boards,
-      offset:sizeof(struct atmio16_board_t),
+	.driver_name = "atmio16",
+	.module = THIS_MODULE,
+	.attach = atmio16d_attach,
+	.detach = atmio16d_detach,
+	.board_name = &atmio16_boards[0].name,
+	.num_names = n_atmio16_boards,
+	.offset = sizeof(struct atmio16_board_t),
 };
 
 COMEDI_INITCLEANUP(driver_atmio16d);
@@ -187,7 +188,7 @@ struct atmio16d_private {
 	unsigned int com_reg_2_state;	/* current state of command register 2 */
 };
 
-static void reset_counters(struct comedi_device * dev)
+static void reset_counters(struct comedi_device *dev)
 {
 	/* Counter 2 */
 	outw(0xFFC2, dev->iobase + AM9513A_COM_REG);
@@ -225,7 +226,7 @@ static void reset_counters(struct comedi_device * dev)
 	outw(0, dev->iobase + AD_CLEAR_REG);
 }
 
-static void reset_atmio16d(struct comedi_device * dev)
+static void reset_atmio16d(struct comedi_device *dev)
 {
 	int i;
 
@@ -257,12 +258,12 @@ static void reset_atmio16d(struct comedi_device * dev)
 	outw(2048, dev->iobase + DAC1_REG);
 }
 
-static irqreturn_t atmio16d_interrupt(int irq, void *d PT_REGS_ARG)
+static irqreturn_t atmio16d_interrupt(int irq, void *d)
 {
 	struct comedi_device *dev = d;
 	struct comedi_subdevice *s = dev->subdevices + 0;
 
-//      printk("atmio16d_interrupt!\n");
+/* printk("atmio16d_interrupt!\n"); */
 
 	comedi_buf_put(s->async, inw(dev->iobase + AD_FIFO_REG));
 
@@ -270,8 +271,8 @@ static irqreturn_t atmio16d_interrupt(int irq, void *d PT_REGS_ARG)
 	return IRQ_HANDLED;
 }
 
-static int atmio16d_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int atmio16d_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0, tmp;
 #ifdef DEBUG1
@@ -371,7 +372,7 @@ static int atmio16d_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevi
 	return 0;
 }
 
-static int atmio16d_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int atmio16d_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct comedi_cmd *cmd = &s->async->cmd;
 	unsigned int timer, base_clock;
@@ -417,10 +418,10 @@ static int atmio16d_ai_cmd(struct comedi_device * dev, struct comedi_subdevice *
 	} else if (cmd->convert_arg < 655360000) {
 		base_clock = CLOCK_100_KHZ;
 		timer = cmd->convert_arg / 10000;
-	} else if (cmd->convert_arg <= 0xffffffff /* 6553600000 */ ) {
+	} else if (cmd->convert_arg <= 0xffffffff /* 6553600000 */) {
 		base_clock = CLOCK_10_KHZ;
 		timer = cmd->convert_arg / 100000;
-	} else if (cmd->convert_arg <= 0xffffffff /* 65536000000 */ ) {
+	} else if (cmd->convert_arg <= 0xffffffff /* 65536000000 */) {
 		base_clock = CLOCK_1_KHZ;
 		timer = cmd->convert_arg / 1000000;
 	}
@@ -449,11 +450,13 @@ static int atmio16d_ai_cmd(struct comedi_device * dev, struct comedi_subdevice *
 		outw(devpriv->com_reg_1_state, dev->iobase + COM_REG_1);
 	} else {
 		/* Counter 4 and 5 are needed */
-		if ((tmp = sample_count & 0xFFFF)) {
+
+		tmp = sample_count & 0xFFFF;
+		if (tmp)
 			outw(tmp - 1, dev->iobase + AM9513A_DATA_REG);
-		} else {
+		else
 			outw(0xFFFF, dev->iobase + AM9513A_DATA_REG);
-		}
+
 		outw(0xFF48, dev->iobase + AM9513A_COM_REG);
 		outw(0, dev->iobase + AM9513A_DATA_REG);
 		outw(0xFF28, dev->iobase + AM9513A_COM_REG);
@@ -483,10 +486,10 @@ static int atmio16d_ai_cmd(struct comedi_device * dev, struct comedi_subdevice *
 		} else if (cmd->scan_begin_arg < 655360000) {
 			base_clock = CLOCK_100_KHZ;
 			timer = cmd->scan_begin_arg / 10000;
-		} else if (cmd->scan_begin_arg < 0xffffffff /* 6553600000 */ ) {
+		} else if (cmd->scan_begin_arg < 0xffffffff /* 6553600000 */) {
 			base_clock = CLOCK_10_KHZ;
 			timer = cmd->scan_begin_arg / 100000;
-		} else if (cmd->scan_begin_arg < 0xffffffff /* 65536000000 */ ) {
+		} else if (cmd->scan_begin_arg < 0xffffffff /* 65536000000 */) {
 			base_clock = CLOCK_1_KHZ;
 			timer = cmd->scan_begin_arg / 1000000;
 		}
@@ -519,7 +522,7 @@ static int atmio16d_ai_cmd(struct comedi_device * dev, struct comedi_subdevice *
 }
 
 /* This will cancel a running acquisition operation */
-static int atmio16d_ai_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int atmio16d_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	reset_atmio16d(dev);
 
@@ -527,8 +530,8 @@ static int atmio16d_ai_cancel(struct comedi_device * dev, struct comedi_subdevic
 }
 
 /* Mode 0 is used to get a single conversion on demand */
-static int atmio16d_ai_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int atmio16d_ai_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i, t;
 	int chan;
@@ -542,9 +545,9 @@ static int atmio16d_ai_insn_read(struct comedi_device * dev, struct comedi_subde
 	gain = CR_RANGE(insn->chanspec);
 
 	/* reset the Analog input circuitry */
-	//outw( 0, dev->iobase+AD_CLEAR_REG );
+	/* outw( 0, dev->iobase+AD_CLEAR_REG ); */
 	/* reset the Analog Input MUX Counter to 0 */
-	//outw( 0, dev->iobase+MUX_CNTR_REG );
+	/* outw( 0, dev->iobase+MUX_CNTR_REG ); */
 
 	/* set the Input MUX gain */
 	outw(chan | (gain << 6), dev->iobase + MUX_GAIN_REG);
@@ -577,7 +580,7 @@ static int atmio16d_ai_insn_read(struct comedi_device * dev, struct comedi_subde
 		}
 		/* end waiting, now check if it timed out */
 		if (t == ATMIO16D_TIMEOUT) {
-			rt_printk("atmio16d: timeout\n");
+			printk("atmio16d: timeout\n");
 
 			return -ETIME;
 		}
@@ -586,8 +589,8 @@ static int atmio16d_ai_insn_read(struct comedi_device * dev, struct comedi_subde
 	return i;
 }
 
-static int atmio16d_ao_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int atmio16d_ao_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 #ifdef DEBUG1
@@ -601,8 +604,8 @@ static int atmio16d_ao_insn_read(struct comedi_device * dev, struct comedi_subde
 	return i;
 }
 
-static int atmio16d_ao_insn_write(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int atmio16d_ao_insn_write(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan;
@@ -636,8 +639,8 @@ static int atmio16d_ao_insn_write(struct comedi_device * dev, struct comedi_subd
 	return i;
 }
 
-static int atmio16d_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int atmio16d_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -652,8 +655,8 @@ static int atmio16d_dio_insn_bits(struct comedi_device * dev, struct comedi_subd
 	return 2;
 }
 
-static int atmio16d_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int atmio16d_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int mask;
@@ -706,7 +709,7 @@ static int atmio16d_dio_insn_config(struct comedi_device * dev, struct comedi_su
    options[12] - dac1 coding
  */
 
-static int atmio16d_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int atmio16d_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	unsigned int irq;
 	unsigned long iobase;
@@ -726,9 +729,12 @@ static int atmio16d_attach(struct comedi_device * dev, struct comedi_devconfig *
 	/* board name */
 	dev->board_name = boardtype->name;
 
-	if ((ret = alloc_subdevices(dev, 4)) < 0)
+	ret = alloc_subdevices(dev, 4);
+	if (ret < 0)
 		return ret;
-	if ((ret = alloc_private(dev, sizeof(struct atmio16d_private))) < 0)
+
+	ret = alloc_private(dev, sizeof(struct atmio16d_private));
+	if (ret < 0)
 		return ret;
 
 	/* reset the atmio16d hardware */
@@ -737,8 +743,9 @@ static int atmio16d_attach(struct comedi_device * dev, struct comedi_devconfig *
 	/* check if our interrupt is available and get it */
 	irq = it->options[1];
 	if (irq) {
-		if ((ret = comedi_request_irq(irq, atmio16d_interrupt,
-					0, "atmio16d", dev)) < 0) {
+
+		ret = request_irq(irq, atmio16d_interrupt, 0, "atmio16d", dev);
+		if (ret < 0) {
 			printk("failed to allocate irq %u\n", irq);
 			return ret;
 		}
@@ -841,7 +848,7 @@ static int atmio16d_attach(struct comedi_device * dev, struct comedi_devconfig *
 	return 0;
 }
 
-static int atmio16d_detach(struct comedi_device * dev)
+static int atmio16d_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: atmio16d: remove\n", dev->minor);
 
@@ -849,7 +856,7 @@ static int atmio16d_detach(struct comedi_device * dev)
 		subdev_8255_cleanup(dev, dev->subdevices + 3);
 
 	if (dev->irq)
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 
 	reset_atmio16d(dev);
 
diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c
index 61a31ad2d03..e3494820532 100644
--- a/drivers/staging/comedi/drivers/ni_daq_700.c
+++ b/drivers/staging/comedi/drivers/ni_daq_700.c
@@ -41,6 +41,7 @@ emu as port A output, port B input, port C N/A).
 IRQ is assigned but not used.
 */
 
+#include <linux/interrupt.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
@@ -53,36 +54,36 @@ IRQ is assigned but not used.
 
 static struct pcmcia_device *pcmcia_cur_dev = NULL;
 
-#define DIO700_SIZE 8		// size of io region used by board
+#define DIO700_SIZE 8		/*  size of io region used by board */
 
-static int dio700_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int dio700_detach(struct comedi_device * dev);
+static int dio700_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int dio700_detach(struct comedi_device *dev);
 
 enum dio700_bustype { pcmcia_bustype };
 
 struct dio700_board {
 	const char *name;
-	int device_id;		// device id for pcmcia board
-	enum dio700_bustype bustype;	// PCMCIA
-	int have_dio;		// have daqcard-700 dio
-	// function pointers so we can use inb/outb or readb/writeb
-	// as appropriate
+	int device_id;		/*  device id for pcmcia board */
+	enum dio700_bustype bustype;	/*  PCMCIA */
+	int have_dio;		/*  have daqcard-700 dio */
+	/*  function pointers so we can use inb/outb or readb/writeb */
+	/*  as appropriate */
 	unsigned int (*read_byte) (unsigned int address);
 	void (*write_byte) (unsigned int byte, unsigned int address);
 };
 
 static const struct dio700_board dio700_boards[] = {
 	{
-	      name:	"daqcard-700",
-	      device_id:0x4743,// 0x10b is manufacturer id, 0x4743 is device id
-	      bustype:	pcmcia_bustype,
-	      have_dio:1,
+	.name = "daqcard-700",
+	.device_id = 0x4743,/*  0x10b is manufacturer id, 0x4743 is device id */
+	.bustype = pcmcia_bustype,
+	.have_dio = 1,
 		},
 	{
-	      name:	"ni_daq_700",
-	      device_id:0x4743,// 0x10b is manufacturer id, 0x4743 is device id
-	      bustype:	pcmcia_bustype,
-	      have_dio:1,
+	.name = "ni_daq_700",
+	.device_id = 0x4743,/*  0x10b is manufacturer id, 0x4743 is device id */
+	.bustype = pcmcia_bustype,
+	.have_dio = 1,
 		},
 };
 
@@ -100,13 +101,13 @@ struct dio700_private {
 #define devpriv ((struct dio700_private *)dev->private)
 
 static struct comedi_driver driver_dio700 = {
-      driver_name:"ni_daq_700",
-      module:THIS_MODULE,
-      attach:dio700_attach,
-      detach:dio700_detach,
-      num_names:sizeof(dio700_boards) / sizeof(struct dio700_board),
-      board_name:&dio700_boards[0].name,
-      offset:sizeof(struct dio700_board),
+	.driver_name = "ni_daq_700",
+	.module = THIS_MODULE,
+	.attach = dio700_attach,
+	.detach = dio700_detach,
+	.num_names = ARRAY_SIZE(dio700_boards),
+	.board_name = &dio700_boards[0].name,
+	.offset = sizeof(struct dio700_board),
 };
 
 /*	the real driver routines	*/
@@ -128,9 +129,9 @@ struct subdev_700_struct {
 #define CALLBACK_FUNC	(((struct subdev_700_struct *)s->private)->cb_func)
 #define subdevpriv	((struct subdev_700_struct *)s->private)
 
-static void do_config(struct comedi_device * dev, struct comedi_subdevice * s);
+static void do_config(struct comedi_device *dev, struct comedi_subdevice *s);
 
-void subdev_700_interrupt(struct comedi_device * dev, struct comedi_subdevice * s)
+void subdev_700_interrupt(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	short d;
 
@@ -155,8 +156,8 @@ static int subdev_700_cb(int dir, int port, int data, unsigned long arg)
 	}
 }
 
-static int subdev_700_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int subdev_700_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (data[0]) {
 		s->state &= ~data[0];
@@ -173,8 +174,8 @@ static int subdev_700_insn(struct comedi_device * dev, struct comedi_subdevice *
 	return 2;
 }
 
-static int subdev_700_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int subdev_700_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 
 	switch (data[0]) {
@@ -196,13 +197,13 @@ static int subdev_700_insn_config(struct comedi_device * dev, struct comedi_subd
 	return 1;
 }
 
-static void do_config(struct comedi_device * dev, struct comedi_subdevice * s)
+static void do_config(struct comedi_device *dev, struct comedi_subdevice *s)
 {				/* use powerup defaults */
 	return;
 }
 
-static int subdev_700_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int subdev_700_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	unsigned int tmp;
@@ -276,21 +277,21 @@ static int subdev_700_cmdtest(struct comedi_device * dev, struct comedi_subdevic
 	return 0;
 }
 
-static int subdev_700_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int subdev_700_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	/* FIXME */
 
 	return 0;
 }
 
-static int subdev_700_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int subdev_700_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	/* FIXME */
 
 	return 0;
 }
 
-int subdev_700_init(struct comedi_device * dev, struct comedi_subdevice * s, int (*cb) (int,
+int subdev_700_init(struct comedi_device *dev, struct comedi_subdevice *s, int (*cb) (int,
 		int, int, unsigned long), unsigned long arg)
 {
 	s->type = COMEDI_SUBD_DIO;
@@ -319,7 +320,7 @@ int subdev_700_init(struct comedi_device * dev, struct comedi_subdevice * s, int
 	return 0;
 }
 
-int subdev_700_init_irq(struct comedi_device * dev, struct comedi_subdevice * s,
+int subdev_700_init_irq(struct comedi_device *dev, struct comedi_subdevice *s,
 	int (*cb) (int, int, int, unsigned long), unsigned long arg)
 {
 	int ret;
@@ -337,7 +338,7 @@ int subdev_700_init_irq(struct comedi_device * dev, struct comedi_subdevice * s,
 	return 0;
 }
 
-void subdev_700_cleanup(struct comedi_device * dev, struct comedi_subdevice * s)
+void subdev_700_cleanup(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	if (s->private) {
 		if (subdevpriv->have_irq) {
@@ -352,7 +353,7 @@ EXPORT_SYMBOL(subdev_700_init_irq);
 EXPORT_SYMBOL(subdev_700_cleanup);
 EXPORT_SYMBOL(subdev_700_interrupt);
 
-static int dio700_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int dio700_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	unsigned long iobase = 0;
@@ -365,7 +366,7 @@ static int dio700_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	if (alloc_private(dev, sizeof(struct dio700_private)) < 0)
 		return -ENOMEM;
 
-	// get base address, irq etc. based on bustype
+	/*  get base address, irq etc. based on bustype */
 	switch (thisboard->bustype) {
 	case pcmcia_bustype:
 		link = pcmcia_cur_dev;	/* XXX hack */
@@ -415,7 +416,7 @@ static int dio700_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	return 0;
 };
 
-static int dio700_detach(struct comedi_device * dev)
+static int dio700_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: ni_daq_700: cs-remove\n", dev->minor);
 
@@ -425,12 +426,12 @@ static int dio700_detach(struct comedi_device * dev)
 	if (thisboard->bustype != pcmcia_bustype && dev->iobase)
 		release_region(dev->iobase, DIO700_SIZE);
 	if (dev->irq)
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 
 	return 0;
 };
 
-// PCMCIA crap
+/* PCMCIA crap */
 
 /*
    All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
@@ -594,15 +595,21 @@ static void dio700_config(struct pcmcia_device *link)
 	tuple.TupleData = buf;
 	tuple.TupleDataMax = sizeof(buf);
 	tuple.TupleOffset = 0;
-	if ((last_ret = pcmcia_get_first_tuple(link, &tuple)) != 0) {
+
+	last_ret = pcmcia_get_first_tuple(link, &tuple);
+	if (last_ret) {
 		cs_error(link, GetFirstTuple, last_ret);
 		goto cs_failed;
 	}
-	if ((last_ret = pcmcia_get_tuple_data(link, &tuple)) != 0) {
+
+	last_ret = pcmcia_get_tuple_data(link, &tuple);
+	if (last_ret) {
 		cs_error(link, GetTupleData, last_ret);
 		goto cs_failed;
 	}
-	if ((last_ret = pcmcia_parse_tuple(&tuple, &parse)) != 0) {
+
+	last_ret = pcmcia_parse_tuple(&tuple, &parse);
+	 if (last_ret) {
 		cs_error(link, ParseTuple, last_ret);
 		goto cs_failed;
 	}
@@ -622,7 +629,8 @@ static void dio700_config(struct pcmcia_device *link)
 	   will only use the CIS to fill in implementation-defined details.
 	 */
 	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-	if ((last_ret = pcmcia_get_first_tuple(link, &tuple)) != 0) {
+	last_ret = pcmcia_get_first_tuple(link, &tuple);
+	if (last_ret != 0) {
 		cs_error(link, GetFirstTuple, last_ret);
 		goto cs_failed;
 	}
@@ -692,7 +700,9 @@ static void dio700_config(struct pcmcia_device *link)
 		break;
 
 	      next_entry:
-		if ((last_ret = pcmcia_get_next_tuple(link, &tuple)) != 0) {
+
+		last_ret = pcmcia_get_next_tuple(link, &tuple);
+		if (last_ret) {
 			cs_error(link, GetNextTuple, last_ret);
 			goto cs_failed;
 		}
@@ -703,18 +713,21 @@ static void dio700_config(struct pcmcia_device *link)
 	   handler to the interrupt, unless the 'Handler' member of the
 	   irq structure is initialized.
 	 */
-	if (link->conf.Attributes & CONF_ENABLE_IRQ)
-		if ((last_ret = pcmcia_request_irq(link, &link->irq)) != 0) {
+	if (link->conf.Attributes & CONF_ENABLE_IRQ) {
+		last_ret = pcmcia_request_irq(link, &link->irq);
+		if (last_ret) {
 			cs_error(link, RequestIRQ, last_ret);
 			goto cs_failed;
 		}
+	}
 
 	/*
 	   This actually configures the PCMCIA socket -- setting up
 	   the I/O windows and the interrupt mapping, and putting the
 	   card and host interface into "Memory and IO" mode.
 	 */
-	if ((last_ret = pcmcia_request_configuration(link, &link->conf)) != 0) {
+	last_ret = pcmcia_request_configuration(link, &link->conf);
+	if (last_ret != 0) {
 		cs_error(link, RequestConfiguration, last_ret);
 		goto cs_failed;
 	}
diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c
index daec5c4b4c9..a8ac02febc6 100644
--- a/drivers/staging/comedi/drivers/ni_daq_dio24.c
+++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c
@@ -37,9 +37,10 @@ This is just a wrapper around the 8255.o driver to properly handle
 the PCMCIA interface.
 */
 
-//#define LABPC_DEBUG   // enable debugging messages
+/* #define LABPC_DEBUG */   /*  enable debugging messages */
 #undef LABPC_DEBUG
 
+#include <linux/interrupt.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
@@ -54,42 +55,42 @@ the PCMCIA interface.
 
 static struct pcmcia_device *pcmcia_cur_dev = NULL;
 
-#define DIO24_SIZE 4		// size of io region used by board
+#define DIO24_SIZE 4		/*  size of io region used by board */
 
-static int dio24_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int dio24_detach(struct comedi_device * dev);
+static int dio24_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int dio24_detach(struct comedi_device *dev);
 
 enum dio24_bustype { pcmcia_bustype };
 
-typedef struct dio24_board_struct {
+struct dio24_board_struct {
 	const char *name;
-	int device_id;		// device id for pcmcia board
-	enum dio24_bustype bustype;	// PCMCIA
-	int have_dio;		// have 8255 chip
-	// function pointers so we can use inb/outb or readb/writeb as appropriate
+	int device_id;		/*  device id for pcmcia board */
+	enum dio24_bustype bustype;	/*  PCMCIA */
+	int have_dio;		/*  have 8255 chip */
+	/*  function pointers so we can use inb/outb or readb/writeb as appropriate */
 	unsigned int (*read_byte) (unsigned int address);
 	void (*write_byte) (unsigned int byte, unsigned int address);
-} dio24_board;
+};
 
-static const dio24_board dio24_boards[] = {
+static const struct dio24_board_struct dio24_boards[] = {
 	{
-	      name:	"daqcard-dio24",
-	      device_id:0x475c,// 0x10b is manufacturer id, 0x475c is device id
-	      bustype:	pcmcia_bustype,
-	      have_dio:1,
+	.name = "daqcard-dio24",
+	.device_id = 0x475c,/*  0x10b is manufacturer id, 0x475c is device id */
+	.bustype = pcmcia_bustype,
+	.have_dio = 1,
 		},
 	{
-	      name:	"ni_daq_dio24",
-	      device_id:0x475c,// 0x10b is manufacturer id, 0x475c is device id
-	      bustype:	pcmcia_bustype,
-	      have_dio:1,
+	.name = "ni_daq_dio24",
+	.device_id = 0x475c,/*  0x10b is manufacturer id, 0x475c is device id */
+	.bustype = pcmcia_bustype,
+	.have_dio = 1,
 		},
 };
 
 /*
  * Useful for shorthand access to the particular board structure
  */
-#define thisboard ((const dio24_board *)dev->board_ptr)
+#define thisboard ((const struct dio24_board_struct *)dev->board_ptr)
 
 struct dio24_private {
 
@@ -100,16 +101,16 @@ struct dio24_private {
 #define devpriv ((struct dio24_private *)dev->private)
 
 static struct comedi_driver driver_dio24 = {
-      driver_name:"ni_daq_dio24",
-      module:THIS_MODULE,
-      attach:dio24_attach,
-      detach:dio24_detach,
-      num_names:sizeof(dio24_boards) / sizeof(dio24_board),
-      board_name:&dio24_boards[0].name,
-      offset:sizeof(dio24_board),
+	.driver_name = "ni_daq_dio24",
+	.module = THIS_MODULE,
+	.attach = dio24_attach,
+	.detach = dio24_detach,
+	.num_names = ARRAY_SIZE(dio24_boards),
+	.board_name = &dio24_boards[0].name,
+	.offset = sizeof(struct dio24_board_struct),
 };
 
-static int dio24_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int dio24_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	unsigned long iobase = 0;
@@ -122,7 +123,7 @@ static int dio24_attach(struct comedi_device * dev, struct comedi_devconfig * it
 	if (alloc_private(dev, sizeof(struct dio24_private)) < 0)
 		return -ENOMEM;
 
-	// get base address, irq etc. based on bustype
+	/*  get base address, irq etc. based on bustype */
 	switch (thisboard->bustype) {
 	case pcmcia_bustype:
 		link = pcmcia_cur_dev;	/* XXX hack */
@@ -172,7 +173,7 @@ static int dio24_attach(struct comedi_device * dev, struct comedi_devconfig * it
 	return 0;
 };
 
-static int dio24_detach(struct comedi_device * dev)
+static int dio24_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: ni_daq_dio24: remove\n", dev->minor);
 
@@ -182,12 +183,12 @@ static int dio24_detach(struct comedi_device * dev)
 	if (thisboard->bustype != pcmcia_bustype && dev->iobase)
 		release_region(dev->iobase, DIO24_SIZE);
 	if (dev->irq)
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 
 	return 0;
 };
 
-// PCMCIA crap
+/* PCMCIA crap */
 
 /*
    All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
@@ -236,12 +237,12 @@ static void dio24_cs_detach(struct pcmcia_device *);
 
 static const dev_info_t dev_info = "ni_daq_dio24";
 
-typedef struct local_info_t {
+struct local_info_t {
 	struct pcmcia_device *link;
 	dev_node_t node;
 	int stop;
 	struct bus_operations *bus;
-} local_info_t;
+};
 
 /*======================================================================
 
@@ -257,14 +258,14 @@ typedef struct local_info_t {
 
 static int dio24_cs_attach(struct pcmcia_device *link)
 {
-	local_info_t *local;
+	struct local_info_t *local;
 
 	printk(KERN_INFO "ni_daq_dio24: HOLA SOY YO - CS-attach!\n");
 
 	DEBUG(0, "dio24_cs_attach()\n");
 
 	/* Allocate space for private device-specific data */
-	local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
+	local = kzalloc(sizeof(struct local_info_t), GFP_KERNEL);
 	if (!local)
 		return -ENOMEM;
 	local->link = link;
@@ -309,7 +310,7 @@ static void dio24_cs_detach(struct pcmcia_device *link)
 	DEBUG(0, "dio24_cs_detach(0x%p)\n", link);
 
 	if (link->dev_node) {
-		((local_info_t *) link->priv)->stop = 1;
+		((struct local_info_t *) link->priv)->stop = 1;
 		dio24_release(link);
 	}
 
@@ -329,7 +330,7 @@ static void dio24_cs_detach(struct pcmcia_device *link)
 
 static void dio24_config(struct pcmcia_device *link)
 {
-	local_info_t *dev = link->priv;
+	struct local_info_t *dev = link->priv;
 	tuple_t tuple;
 	cisparse_t parse;
 	int last_ret;
@@ -351,15 +352,21 @@ static void dio24_config(struct pcmcia_device *link)
 	tuple.TupleData = buf;
 	tuple.TupleDataMax = sizeof(buf);
 	tuple.TupleOffset = 0;
-	if ((last_ret = pcmcia_get_first_tuple(link, &tuple)) != 0) {
+
+	last_ret = pcmcia_get_first_tuple(link, &tuple);
+	if (last_ret) {
 		cs_error(link, GetFirstTuple, last_ret);
 		goto cs_failed;
 	}
-	if ((last_ret = pcmcia_get_tuple_data(link, &tuple)) != 0) {
+
+	last_ret = pcmcia_get_tuple_data(link, &tuple);
+	if (last_ret) {
 		cs_error(link, GetTupleData, last_ret);
 		goto cs_failed;
 	}
-	if ((last_ret = pcmcia_parse_tuple(&tuple, &parse)) != 0) {
+
+	last_ret = pcmcia_parse_tuple(&tuple, &parse);
+	if (last_ret) {
 		cs_error(link, ParseTuple, last_ret);
 		goto cs_failed;
 	}
@@ -379,7 +386,9 @@ static void dio24_config(struct pcmcia_device *link)
 	   will only use the CIS to fill in implementation-defined details.
 	 */
 	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-	if ((last_ret = pcmcia_get_first_tuple(link, &tuple)) != 0) {
+
+	last_ret = pcmcia_get_first_tuple(link, &tuple);
+	if (last_ret) {
 		cs_error(link, GetFirstTuple, last_ret);
 		goto cs_failed;
 	}
@@ -449,7 +458,9 @@ static void dio24_config(struct pcmcia_device *link)
 		break;
 
 	      next_entry:
-		if ((last_ret = pcmcia_get_next_tuple(link, &tuple)) != 0) {
+
+		last_ret = pcmcia_get_next_tuple(link, &tuple);
+		if (last_ret) {
 			cs_error(link, GetNextTuple, last_ret);
 			goto cs_failed;
 		}
@@ -460,18 +471,21 @@ static void dio24_config(struct pcmcia_device *link)
 	   handler to the interrupt, unless the 'Handler' member of the
 	   irq structure is initialized.
 	 */
-	if (link->conf.Attributes & CONF_ENABLE_IRQ)
-		if ((last_ret = pcmcia_request_irq(link, &link->irq)) != 0) {
+	if (link->conf.Attributes & CONF_ENABLE_IRQ) {
+		last_ret = pcmcia_request_irq(link, &link->irq);
+		if (last_ret) {
 			cs_error(link, RequestIRQ, last_ret);
 			goto cs_failed;
 		}
+	}
 
 	/*
 	   This actually configures the PCMCIA socket -- setting up
 	   the I/O windows and the interrupt mapping, and putting the
 	   card and host interface into "Memory and IO" mode.
 	 */
-	if ((last_ret = pcmcia_request_configuration(link, &link->conf)) != 0) {
+	last_ret = pcmcia_request_configuration(link, &link->conf);
+	if (last_ret) {
 		cs_error(link, RequestConfiguration, last_ret);
 		goto cs_failed;
 	}
@@ -529,7 +543,7 @@ static void dio24_release(struct pcmcia_device *link)
 
 static int dio24_cs_suspend(struct pcmcia_device *link)
 {
-	local_info_t *local = link->priv;
+	struct local_info_t *local = link->priv;
 
 	/* Mark the device as stopped, to block IO until later */
 	local->stop = 1;
@@ -538,7 +552,7 @@ static int dio24_cs_suspend(struct pcmcia_device *link)
 
 static int dio24_cs_resume(struct pcmcia_device *link)
 {
-	local_info_t *local = link->priv;
+	struct local_info_t *local = link->priv;
 
 	local->stop = 0;
 	return 0;
diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
index 37898d8474c..30e11f46a64 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -74,8 +74,9 @@ NI manuals:
 */
 
 #undef LABPC_DEBUG
-//#define LABPC_DEBUG   // enable debugging messages
+/* #define LABPC_DEBUG    enable debugging messages */
 
+#include <linux/interrupt.h>
 #include "../comedidev.h"
 
 #include <linux/delay.h>
@@ -89,120 +90,120 @@ NI manuals:
 
 #define DRV_NAME "ni_labpc"
 
-#define LABPC_SIZE           32	// size of io region used by board
-#define LABPC_TIMER_BASE            500	// 2 MHz master clock
+#define LABPC_SIZE           32	/*  size of io region used by board */
+#define LABPC_TIMER_BASE            500	/*  2 MHz master clock */
 
 /* Registers for the lab-pc+ */
 
-//write-only registers
+/* write-only registers */
 #define COMMAND1_REG	0x0
 #define   ADC_GAIN_MASK	(0x7 << 4)
 #define   ADC_CHAN_BITS(x)	((x) & 0x7)
-#define   ADC_SCAN_EN_BIT	0x80	// enables multi channel scans
+#define   ADC_SCAN_EN_BIT	0x80	/*  enables multi channel scans */
 #define COMMAND2_REG	0x1
-#define   PRETRIG_BIT	0x1	// enable pretriggering (used in conjunction with SWTRIG)
-#define   HWTRIG_BIT	0x2	// enable paced conversions on external trigger
-#define   SWTRIG_BIT	0x4	// enable paced conversions
-#define   CASCADE_BIT	0x8	// use two cascaded counters for pacing
+#define   PRETRIG_BIT	0x1	/*  enable pretriggering (used in conjunction with SWTRIG) */
+#define   HWTRIG_BIT	0x2	/*  enable paced conversions on external trigger */
+#define   SWTRIG_BIT	0x4	/*  enable paced conversions */
+#define   CASCADE_BIT	0x8	/*  use two cascaded counters for pacing */
 #define   DAC_PACED_BIT(channel)	(0x40 << ((channel) & 0x1))
 #define COMMAND3_REG	0x2
-#define   DMA_EN_BIT	0x1	// enable dma transfers
-#define   DIO_INTR_EN_BIT	0x2	// enable interrupts for 8255
-#define   DMATC_INTR_EN_BIT	0x4	// enable dma terminal count interrupt
-#define   TIMER_INTR_EN_BIT	0x8	// enable timer interrupt
-#define   ERR_INTR_EN_BIT	0x10	// enable error interrupt
-#define   ADC_FNE_INTR_EN_BIT	0x20	// enable fifo not empty interrupt
+#define   DMA_EN_BIT	0x1	/*  enable dma transfers */
+#define   DIO_INTR_EN_BIT	0x2	/*  enable interrupts for 8255 */
+#define   DMATC_INTR_EN_BIT	0x4	/*  enable dma terminal count interrupt */
+#define   TIMER_INTR_EN_BIT	0x8	/*  enable timer interrupt */
+#define   ERR_INTR_EN_BIT	0x10	/*  enable error interrupt */
+#define   ADC_FNE_INTR_EN_BIT	0x20	/*  enable fifo not empty interrupt */
 #define ADC_CONVERT_REG	0x3
 #define DAC_LSB_REG(channel)	(0x4 + 2 * ((channel) & 0x1))
 #define DAC_MSB_REG(channel)	(0x5 + 2 * ((channel) & 0x1))
 #define ADC_CLEAR_REG	0x8
 #define DMATC_CLEAR_REG	0xa
 #define TIMER_CLEAR_REG	0xc
-#define COMMAND6_REG	0xe	// 1200 boards only
-#define   ADC_COMMON_BIT	0x1	// select ground or common-mode reference
-#define   ADC_UNIP_BIT	0x2	// adc unipolar
-#define   DAC_UNIP_BIT(channel)	(0x4 << ((channel) & 0x1))	// dac unipolar
-#define   ADC_FHF_INTR_EN_BIT	0x20	// enable fifo half full interrupt
-#define   A1_INTR_EN_BIT	0x40	// enable interrupt on end of hardware count
-#define   ADC_SCAN_UP_BIT 0x80	// scan up from channel zero instead of down to zero
+#define COMMAND6_REG	0xe	/*  1200 boards only */
+#define   ADC_COMMON_BIT	0x1	/*  select ground or common-mode reference */
+#define   ADC_UNIP_BIT	0x2	/*  adc unipolar */
+#define   DAC_UNIP_BIT(channel)	(0x4 << ((channel) & 0x1))	/*  dac unipolar */
+#define   ADC_FHF_INTR_EN_BIT	0x20	/*  enable fifo half full interrupt */
+#define   A1_INTR_EN_BIT	0x40	/*  enable interrupt on end of hardware count */
+#define   ADC_SCAN_UP_BIT 0x80	/*  scan up from channel zero instead of down to zero */
 #define COMMAND4_REG	0xf
-#define   INTERVAL_SCAN_EN_BIT	0x1	// enables 'interval' scanning
-#define   EXT_SCAN_EN_BIT	0x2	// enables external signal on counter b1 output to trigger scan
-#define   EXT_CONVERT_OUT_BIT	0x4	// chooses direction (output or input) for EXTCONV* line
-#define   ADC_DIFF_BIT	0x8	// chooses differential inputs for adc (in conjunction with board jumper)
+#define   INTERVAL_SCAN_EN_BIT	0x1	/*  enables 'interval' scanning */
+#define   EXT_SCAN_EN_BIT	0x2	/*  enables external signal on counter b1 output to trigger scan */
+#define   EXT_CONVERT_OUT_BIT	0x4	/*  chooses direction (output or input) for EXTCONV* line */
+#define   ADC_DIFF_BIT	0x8	/*  chooses differential inputs for adc (in conjunction with board jumper) */
 #define   EXT_CONVERT_DISABLE_BIT	0x10
-#define COMMAND5_REG	0x1c	// 1200 boards only, calibration stuff
-#define   EEPROM_WRITE_UNPROTECT_BIT	0x4	// enable eeprom for write
-#define   DITHER_EN_BIT	0x8	// enable dithering
-#define   CALDAC_LOAD_BIT	0x10	// load calibration dac
-#define   SCLOCK_BIT	0x20	// serial clock - rising edge writes, falling edge reads
-#define   SDATA_BIT	0x40	// serial data bit for writing to eeprom or calibration dacs
-#define   EEPROM_EN_BIT	0x80	// enable eeprom for read/write
+#define COMMAND5_REG	0x1c	/*  1200 boards only, calibration stuff */
+#define   EEPROM_WRITE_UNPROTECT_BIT	0x4	/*  enable eeprom for write */
+#define   DITHER_EN_BIT	0x8	/*  enable dithering */
+#define   CALDAC_LOAD_BIT	0x10	/*  load calibration dac */
+#define   SCLOCK_BIT	0x20	/*  serial clock - rising edge writes, falling edge reads */
+#define   SDATA_BIT	0x40	/*  serial data bit for writing to eeprom or calibration dacs */
+#define   EEPROM_EN_BIT	0x80	/*  enable eeprom for read/write */
 #define INTERVAL_COUNT_REG	0x1e
 #define INTERVAL_LOAD_REG	0x1f
 #define   INTERVAL_LOAD_BITS	0x1
 
-// read-only registers
+/* read-only registers */
 #define STATUS1_REG	0x0
-#define   DATA_AVAIL_BIT	0x1	// data is available in fifo
-#define   OVERRUN_BIT	0x2	// overrun has occurred
-#define   OVERFLOW_BIT	0x4	// fifo overflow
-#define   TIMER_BIT	0x8	// timer interrupt has occured
-#define   DMATC_BIT	0x10	// dma terminal count has occured
-#define   EXT_TRIG_BIT	0x40	// external trigger has occured
-#define STATUS2_REG	0x1d	// 1200 boards only
-#define   EEPROM_OUT_BIT	0x1	// programmable eeprom serial output
-#define   A1_TC_BIT	0x2	// counter A1 terminal count
-#define   FNHF_BIT	0x4	// fifo not half full
+#define   DATA_AVAIL_BIT	0x1	/*  data is available in fifo */
+#define   OVERRUN_BIT	0x2	/*  overrun has occurred */
+#define   OVERFLOW_BIT	0x4	/*  fifo overflow */
+#define   TIMER_BIT	0x8	/*  timer interrupt has occured */
+#define   DMATC_BIT	0x10	/*  dma terminal count has occured */
+#define   EXT_TRIG_BIT	0x40	/*  external trigger has occured */
+#define STATUS2_REG	0x1d	/*  1200 boards only */
+#define   EEPROM_OUT_BIT	0x1	/*  programmable eeprom serial output */
+#define   A1_TC_BIT	0x2	/*  counter A1 terminal count */
+#define   FNHF_BIT	0x4	/*  fifo not half full */
 #define ADC_FIFO_REG	0xa
 
 #define DIO_BASE_REG	0x10
 #define COUNTER_A_BASE_REG	0x14
 #define COUNTER_A_CONTROL_REG	(COUNTER_A_BASE_REG + 0x3)
-#define   INIT_A0_BITS	0x14	// check modes put conversion pacer output in harmless state (a0 mode 2)
-#define   INIT_A1_BITS	0x70	// put hardware conversion counter output in harmless state (a1 mode 0)
+#define   INIT_A0_BITS	0x14	/*  check modes put conversion pacer output in harmless state (a0 mode 2) */
+#define   INIT_A1_BITS	0x70	/*  put hardware conversion counter output in harmless state (a1 mode 0) */
 #define COUNTER_B_BASE_REG	0x18
 
-static int labpc_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int labpc_cancel(struct comedi_device * dev, struct comedi_subdevice * s);
-static irqreturn_t labpc_interrupt(int irq, void *d PT_REGS_ARG);
-static int labpc_drain_fifo(struct comedi_device * dev);
-static void labpc_drain_dma(struct comedi_device * dev);
-static void handle_isa_dma(struct comedi_device * dev);
-static void labpc_drain_dregs(struct comedi_device * dev);
-static int labpc_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd);
-static int labpc_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s);
-static int labpc_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int labpc_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int labpc_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int labpc_calib_read_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int labpc_calib_write_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int labpc_eeprom_read_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int labpc_eeprom_write_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int labpc_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
+static irqreturn_t labpc_interrupt(int irq, void *d);
+static int labpc_drain_fifo(struct comedi_device *dev);
+static void labpc_drain_dma(struct comedi_device *dev);
+static void handle_isa_dma(struct comedi_device *dev);
+static void labpc_drain_dregs(struct comedi_device *dev);
+static int labpc_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd);
+static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
+static int labpc_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int labpc_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int labpc_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int labpc_calib_read_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int labpc_calib_write_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int labpc_eeprom_read_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int labpc_eeprom_write_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 static unsigned int labpc_suggest_transfer_size(struct comedi_cmd cmd);
-static void labpc_adc_timing(struct comedi_device * dev, struct comedi_cmd * cmd);
+static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd);
 #ifdef CONFIG_COMEDI_PCI
 static int labpc_find_device(struct comedi_device *dev, int bus, int slot);
 #endif
 static int labpc_dio_mem_callback(int dir, int port, int data,
 	unsigned long arg);
-static void labpc_serial_out(struct comedi_device * dev, unsigned int value,
+static void labpc_serial_out(struct comedi_device *dev, unsigned int value,
 	unsigned int num_bits);
-static unsigned int labpc_serial_in(struct comedi_device * dev);
-static unsigned int labpc_eeprom_read(struct comedi_device * dev,
+static unsigned int labpc_serial_in(struct comedi_device *dev);
+static unsigned int labpc_eeprom_read(struct comedi_device *dev,
 	unsigned int address);
-static unsigned int labpc_eeprom_read_status(struct comedi_device * dev);
-static unsigned int labpc_eeprom_write(struct comedi_device * dev,
+static unsigned int labpc_eeprom_read_status(struct comedi_device *dev);
+static unsigned int labpc_eeprom_write(struct comedi_device *dev,
 	unsigned int address, unsigned int value);
-static void write_caldac(struct comedi_device * dev, unsigned int channel,
+static void write_caldac(struct comedi_device *dev, unsigned int channel,
 	unsigned int value);
 
 enum scan_mode {
@@ -212,9 +213,9 @@ enum scan_mode {
 	MODE_MULT_CHAN_DOWN,
 };
 
-//analog input ranges
+/* analog input ranges */
 #define NUM_LABPC_PLUS_AI_RANGES 16
-// indicates unipolar ranges
+/* indicates unipolar ranges */
 static const int labpc_plus_is_unipolar[NUM_LABPC_PLUS_AI_RANGES] = {
 	0,
 	0,
@@ -234,7 +235,7 @@ static const int labpc_plus_is_unipolar[NUM_LABPC_PLUS_AI_RANGES] = {
 	1,
 };
 
-// map range index to gain bits
+/* map range index to gain bits */
 static const int labpc_plus_ai_gain_bits[NUM_LABPC_PLUS_AI_RANGES] = {
 	0x00,
 	0x10,
@@ -276,7 +277,7 @@ static const struct comedi_lrange range_labpc_plus_ai = {
 };
 
 #define NUM_LABPC_1200_AI_RANGES 14
-// indicates unipolar ranges
+/* indicates unipolar ranges */
 const int labpc_1200_is_unipolar[NUM_LABPC_1200_AI_RANGES] = {
 	0,
 	0,
@@ -294,7 +295,7 @@ const int labpc_1200_is_unipolar[NUM_LABPC_1200_AI_RANGES] = {
 	1,
 };
 
-// map range index to gain bits
+/* map range index to gain bits */
 const int labpc_1200_ai_gain_bits[NUM_LABPC_1200_AI_RANGES] = {
 	0x00,
 	0x20,
@@ -331,7 +332,7 @@ const struct comedi_lrange range_labpc_1200_ai = {
 		}
 };
 
-//analog output ranges
+/* analog output ranges */
 #define AO_RANGE_IS_UNIPOLAR 0x1
 static const struct comedi_lrange range_labpc_ao = {
 	2,
@@ -360,58 +361,58 @@ static inline void labpc_writeb(unsigned int byte, unsigned long address)
 	writeb(byte, (void *)address);
 }
 
-static const labpc_board labpc_boards[] = {
+static const struct labpc_board_struct labpc_boards[] = {
 	{
-	      name:	"lab-pc-1200",
-	      ai_speed:10000,
-	      bustype:	isa_bustype,
-	      register_layout:labpc_1200_layout,
-	      has_ao:	1,
-	      ai_range_table:&range_labpc_1200_ai,
-	      ai_range_code:labpc_1200_ai_gain_bits,
-	      ai_range_is_unipolar:labpc_1200_is_unipolar,
-	      ai_scan_up:1,
-	      memory_mapped_io:0,
+	.name = "lab-pc-1200",
+	.ai_speed = 10000,
+	.bustype = isa_bustype,
+	.register_layout = labpc_1200_layout,
+	.has_ao = 1,
+	.ai_range_table = &range_labpc_1200_ai,
+	.ai_range_code = labpc_1200_ai_gain_bits,
+	.ai_range_is_unipolar = labpc_1200_is_unipolar,
+	.ai_scan_up = 1,
+	.memory_mapped_io = 0,
 		},
 	{
-	      name:	"lab-pc-1200ai",
-	      ai_speed:10000,
-	      bustype:	isa_bustype,
-	      register_layout:labpc_1200_layout,
-	      has_ao:	0,
-	      ai_range_table:&range_labpc_1200_ai,
-	      ai_range_code:labpc_1200_ai_gain_bits,
-	      ai_range_is_unipolar:labpc_1200_is_unipolar,
-	      ai_scan_up:1,
-	      memory_mapped_io:0,
+	.name = "lab-pc-1200ai",
+	.ai_speed = 10000,
+	.bustype = isa_bustype,
+	.register_layout = labpc_1200_layout,
+	.has_ao = 0,
+	.ai_range_table = &range_labpc_1200_ai,
+	.ai_range_code = labpc_1200_ai_gain_bits,
+	.ai_range_is_unipolar = labpc_1200_is_unipolar,
+	.ai_scan_up = 1,
+	.memory_mapped_io = 0,
 		},
 	{
-	      name:	"lab-pc+",
-	      ai_speed:12000,
-	      bustype:	isa_bustype,
-	      register_layout:labpc_plus_layout,
-	      has_ao:	1,
-	      ai_range_table:&range_labpc_plus_ai,
-	      ai_range_code:labpc_plus_ai_gain_bits,
-	      ai_range_is_unipolar:labpc_plus_is_unipolar,
-	      ai_scan_up:0,
-	      memory_mapped_io:0,
+	.name = "lab-pc+",
+	.ai_speed = 12000,
+	.bustype = isa_bustype,
+	.register_layout = labpc_plus_layout,
+	.has_ao = 1,
+	.ai_range_table = &range_labpc_plus_ai,
+	.ai_range_code = labpc_plus_ai_gain_bits,
+	.ai_range_is_unipolar = labpc_plus_is_unipolar,
+	.ai_scan_up = 0,
+	.memory_mapped_io = 0,
 		},
 #ifdef CONFIG_COMEDI_PCI
 	{
-		name:	"pci-1200",
-		device_id:0x161,
-		ai_speed:10000,
-		bustype:	pci_bustype,
-		register_layout:labpc_1200_layout,
-		has_ao:	1,
-		ai_range_table:&range_labpc_1200_ai,
-		ai_range_code:labpc_1200_ai_gain_bits,
-		ai_range_is_unipolar:labpc_1200_is_unipolar,
-		ai_scan_up:1,
-		memory_mapped_io:1,
+	.name = "pci-1200",
+	.device_id = 0x161,
+	.ai_speed = 10000,
+	.bustype = pci_bustype,
+	.register_layout = labpc_1200_layout,
+	.has_ao = 1,
+	.ai_range_table = &range_labpc_1200_ai,
+	.ai_range_code = labpc_1200_ai_gain_bits,
+	.ai_range_is_unipolar = labpc_1200_is_unipolar,
+	.ai_scan_up = 1,
+	.memory_mapped_io = 1,
 		},
-	// dummy entry so pci board works when comedi_config is passed driver name
+	/*  dummy entry so pci board works when comedi_config is passed driver name */
 	{
 		.name = DRV_NAME,
 		.bustype = pci_bustype,
@@ -422,21 +423,21 @@ static const labpc_board labpc_boards[] = {
 /*
  * Useful for shorthand access to the particular board structure
  */
-#define thisboard ((labpc_board *)dev->board_ptr)
+#define thisboard ((struct labpc_board_struct *)dev->board_ptr)
 
-static const int dma_buffer_size = 0xff00;	// size in bytes of dma buffer
-static const int sample_size = 2;	// 2 bytes per sample
+static const int dma_buffer_size = 0xff00;	/*  size in bytes of dma buffer */
+static const int sample_size = 2;	/*  2 bytes per sample */
 
-#define devpriv ((labpc_private *)dev->private)
+#define devpriv ((struct labpc_private *)dev->private)
 
 static struct comedi_driver driver_labpc = {
 	.driver_name = DRV_NAME,
 	.module = THIS_MODULE,
 	.attach = labpc_attach,
 	.detach = labpc_common_detach,
-	.num_names = sizeof(labpc_boards) / sizeof(labpc_board),
+	.num_names = ARRAY_SIZE(labpc_boards),
 	.board_name = &labpc_boards[0].name,
-	.offset = sizeof(labpc_board),
+	.offset = sizeof(struct labpc_board_struct),
 };
 
 #ifdef CONFIG_COMEDI_PCI
@@ -448,7 +449,7 @@ static DEFINE_PCI_DEVICE_TABLE(labpc_pci_table) = {
 MODULE_DEVICE_TABLE(pci, labpc_pci_table);
 #endif /* CONFIG_COMEDI_PCI */
 
-static inline int labpc_counter_load(struct comedi_device * dev,
+static inline int labpc_counter_load(struct comedi_device *dev,
 	unsigned long base_address, unsigned int counter_number,
 	unsigned int count, unsigned int mode)
 {
@@ -459,7 +460,7 @@ static inline int labpc_counter_load(struct comedi_device * dev,
 		return i8254_load(base_address, 0, counter_number, count, mode);
 }
 
-int labpc_common_attach(struct comedi_device * dev, unsigned long iobase,
+int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
 	unsigned int irq, unsigned int dma_chan)
 {
 	struct comedi_subdevice *s;
@@ -481,7 +482,7 @@ int labpc_common_attach(struct comedi_device * dev, unsigned long iobase,
 		printk("io base address is zero!\n");
 		return -EINVAL;
 	}
-	// request io regions for isa boards
+	/*  request io regions for isa boards */
 	if (thisboard->bustype == isa_bustype) {
 		/* check if io addresses are available */
 		if (!request_region(iobase, LABPC_SIZE,
@@ -499,7 +500,7 @@ int labpc_common_attach(struct comedi_device * dev, unsigned long iobase,
 		devpriv->read_byte = labpc_inb;
 		devpriv->write_byte = labpc_outb;
 	}
-	// initialize board's command registers
+	/*  initialize board's command registers */
 	devpriv->write_byte(devpriv->command1_bits, dev->iobase + COMMAND1_REG);
 	devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG);
 	devpriv->write_byte(devpriv->command3_bits, dev->iobase + COMMAND3_REG);
@@ -516,7 +517,7 @@ int labpc_common_attach(struct comedi_device * dev, unsigned long iobase,
 		isr_flags = 0;
 		if (thisboard->bustype == pci_bustype)
 			isr_flags |= IRQF_SHARED;
-		if (comedi_request_irq(irq, labpc_interrupt, isr_flags,
+		if (request_irq(irq, labpc_interrupt, isr_flags,
 				driver_labpc.driver_name, dev)) {
 			printk("unable to allocate irq %u\n", irq);
 			return -EINVAL;
@@ -524,12 +525,12 @@ int labpc_common_attach(struct comedi_device * dev, unsigned long iobase,
 	}
 	dev->irq = irq;
 
-	// grab dma channel
+	/*  grab dma channel */
 	if (dma_chan > 3) {
 		printk(" invalid dma channel %u\n", dma_chan);
 		return -EINVAL;
 	} else if (dma_chan) {
-		// allocate dma buffer
+		/*  allocate dma buffer */
 		devpriv->dma_buffer =
 			kmalloc(dma_buffer_size, GFP_KERNEL | GFP_DMA);
 		if (devpriv->dma_buffer == NULL) {
@@ -562,7 +563,7 @@ int labpc_common_attach(struct comedi_device * dev, unsigned long iobase,
 		SDF_CMD_READ;
 	s->n_chan = 8;
 	s->len_chanlist = 8;
-	s->maxdata = (1 << 12) - 1;	// 12 bit resolution
+	s->maxdata = (1 << 12) - 1;	/*  12 bit resolution */
 	s->range_table = thisboard->ai_range_table;
 	s->do_cmd = labpc_ai_cmd;
 	s->do_cmdtest = labpc_ai_cmdtest;
@@ -577,7 +578,7 @@ int labpc_common_attach(struct comedi_device * dev, unsigned long iobase,
 		s->type = COMEDI_SUBD_AO;
 		s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_GROUND;
 		s->n_chan = NUM_AO_CHAN;
-		s->maxdata = (1 << 12) - 1;	// 12 bit resolution
+		s->maxdata = (1 << 12) - 1;	/*  12 bit resolution */
 		s->range_table = &range_labpc_ao;
 		s->insn_read = labpc_ao_rinsn;
 		s->insn_write = labpc_ao_winsn;
@@ -595,14 +596,14 @@ int labpc_common_attach(struct comedi_device * dev, unsigned long iobase,
 
 	/* 8255 dio */
 	s = dev->subdevices + 2;
-	// if board uses io memory we have to give a custom callback function to the 8255 driver
+	/*  if board uses io memory we have to give a custom callback function to the 8255 driver */
 	if (thisboard->memory_mapped_io)
 		subdev_8255_init(dev, s, labpc_dio_mem_callback,
 			(unsigned long)(dev->iobase + DIO_BASE_REG));
 	else
 		subdev_8255_init(dev, s, NULL, dev->iobase + DIO_BASE_REG);
 
-	// calibration subdevices for boards that have one
+	/*  calibration subdevices for boards that have one */
 	s = dev->subdevices + 3;
 	if (thisboard->register_layout == labpc_1200_layout) {
 		s->type = COMEDI_SUBD_CALIB;
@@ -643,7 +644,7 @@ int labpc_common_attach(struct comedi_device * dev, unsigned long iobase,
 	return 0;
 }
 
-static int labpc_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	unsigned long iobase = 0;
 	unsigned int irq = 0;
@@ -653,10 +654,10 @@ static int labpc_attach(struct comedi_device * dev, struct comedi_devconfig * it
 #endif
 
 	/* allocate and initialize dev->private */
-	if (alloc_private(dev, sizeof(labpc_private)) < 0)
+	if (alloc_private(dev, sizeof(struct labpc_private)) < 0)
 		return -ENOMEM;
 
-	// get base address, irq etc. based on bustype
+	/*  get base address, irq etc. based on bustype */
 	switch (thisboard->bustype) {
 	case isa_bustype:
 		iobase = it->options[0];
@@ -692,7 +693,7 @@ static int labpc_attach(struct comedi_device * dev, struct comedi_devconfig * it
 	return labpc_common_attach(dev, iobase, irq, dma_chan);
 }
 
-// adapted from ni_pcimio for finding mite based boards (pc-1200)
+/* adapted from ni_pcimio for finding mite based boards (pc-1200) */
 #ifdef CONFIG_COMEDI_PCI
 static int labpc_find_device(struct comedi_device *dev, int bus, int slot)
 {
@@ -701,7 +702,7 @@ static int labpc_find_device(struct comedi_device *dev, int bus, int slot)
 	for (mite = mite_devices; mite; mite = mite->next) {
 		if (mite->used)
 			continue;
-		// if bus/slot are specified then make sure we have the right bus/slot
+		/*  if bus/slot are specified then make sure we have the right bus/slot */
 		if (bus || slot) {
 			if (bus != mite->pcidev->bus->number
 				|| slot != PCI_SLOT(mite->pcidev->devfn))
@@ -712,7 +713,7 @@ static int labpc_find_device(struct comedi_device *dev, int bus, int slot)
 				continue;
 			if (mite_device_id(mite) == labpc_boards[i].device_id) {
 				devpriv->mite = mite;
-				// fixup board pointer, in case we were using the dummy "ni_labpc" entry
+				/*  fixup board pointer, in case we were using the dummy "ni_labpc" entry */
 				dev->board_ptr = &labpc_boards[i];
 				return 0;
 			}
@@ -724,7 +725,7 @@ static int labpc_find_device(struct comedi_device *dev, int bus, int slot)
 }
 #endif
 
-int labpc_common_detach(struct comedi_device * dev)
+int labpc_common_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: ni_labpc: detach\n", dev->minor);
 
@@ -737,7 +738,7 @@ int labpc_common_detach(struct comedi_device * dev)
 	if (devpriv->dma_chan)
 		free_dma(devpriv->dma_chan);
 	if (dev->irq)
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 	if (thisboard->bustype == isa_bustype && dev->iobase)
 		release_region(dev->iobase, LABPC_SIZE);
 #ifdef CONFIG_COMEDI_PCI
@@ -748,21 +749,21 @@ int labpc_common_detach(struct comedi_device * dev)
 	return 0;
 };
 
-static void labpc_clear_adc_fifo(const struct comedi_device * dev)
+static void labpc_clear_adc_fifo(const struct comedi_device *dev)
 {
 	devpriv->write_byte(0x1, dev->iobase + ADC_CLEAR_REG);
 	devpriv->read_byte(dev->iobase + ADC_FIFO_REG);
 	devpriv->read_byte(dev->iobase + ADC_FIFO_REG);
 }
 
-static int labpc_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int labpc_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	spin_lock_irqsave(&dev->spinlock, flags);
 	devpriv->command2_bits &= ~SWTRIG_BIT & ~HWTRIG_BIT & ~PRETRIG_BIT;
 	devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG);
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
 	devpriv->command3_bits = 0;
 	devpriv->write_byte(devpriv->command3_bits, dev->iobase + COMMAND3_REG);
@@ -770,7 +771,7 @@ static int labpc_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
 	return 0;
 }
 
-static enum scan_mode labpc_ai_scan_mode(const struct comedi_cmd * cmd)
+static enum scan_mode labpc_ai_scan_mode(const struct comedi_cmd *cmd)
 {
 	if (cmd->chanlist_len == 1)
 		return MODE_SINGLE_CHAN;
@@ -788,13 +789,13 @@ static enum scan_mode labpc_ai_scan_mode(const struct comedi_cmd * cmd)
 	if (CR_CHAN(cmd->chanlist[0]) > CR_CHAN(cmd->chanlist[1]))
 		return MODE_MULT_CHAN_DOWN;
 
-	rt_printk("ni_labpc: bug! this should never happen\n");
+	printk("ni_labpc: bug! this should never happen\n");
 
 	return 0;
 }
 
-static int labpc_ai_chanlist_invalid(const struct comedi_device * dev,
-	const struct comedi_cmd * cmd)
+static int labpc_ai_chanlist_invalid(const struct comedi_device *dev,
+	const struct comedi_cmd *cmd)
 {
 	int mode, channel, range, aref, i;
 
@@ -844,7 +845,7 @@ static int labpc_ai_chanlist_invalid(const struct comedi_device * dev,
 			}
 			break;
 		default:
-			rt_printk("ni_labpc: bug! in chanlist check\n");
+			printk("ni_labpc: bug! in chanlist check\n");
 			return 1;
 			break;
 		}
@@ -865,7 +866,7 @@ static int labpc_ai_chanlist_invalid(const struct comedi_device * dev,
 	return 0;
 }
 
-static int labpc_use_continuous_mode(const struct comedi_cmd * cmd)
+static int labpc_use_continuous_mode(const struct comedi_cmd *cmd)
 {
 	if (labpc_ai_scan_mode(cmd) == MODE_SINGLE_CHAN)
 		return 1;
@@ -876,7 +877,7 @@ static int labpc_use_continuous_mode(const struct comedi_cmd * cmd)
 	return 0;
 }
 
-static unsigned int labpc_ai_convert_period(const struct comedi_cmd * cmd)
+static unsigned int labpc_ai_convert_period(const struct comedi_cmd *cmd)
 {
 	if (cmd->convert_src != TRIG_TIMER)
 		return 0;
@@ -888,7 +889,7 @@ static unsigned int labpc_ai_convert_period(const struct comedi_cmd * cmd)
 	return cmd->convert_arg;
 }
 
-static void labpc_set_ai_convert_period(struct comedi_cmd * cmd, unsigned int ns)
+static void labpc_set_ai_convert_period(struct comedi_cmd *cmd, unsigned int ns)
 {
 	if (cmd->convert_src != TRIG_TIMER)
 		return;
@@ -902,7 +903,7 @@ static void labpc_set_ai_convert_period(struct comedi_cmd * cmd, unsigned int ns
 		cmd->convert_arg = ns;
 }
 
-static unsigned int labpc_ai_scan_period(const struct comedi_cmd * cmd)
+static unsigned int labpc_ai_scan_period(const struct comedi_cmd *cmd)
 {
 	if (cmd->scan_begin_src != TRIG_TIMER)
 		return 0;
@@ -914,7 +915,7 @@ static unsigned int labpc_ai_scan_period(const struct comedi_cmd * cmd)
 	return cmd->scan_begin_arg;
 }
 
-static void labpc_set_ai_scan_period(struct comedi_cmd * cmd, unsigned int ns)
+static void labpc_set_ai_scan_period(struct comedi_cmd *cmd, unsigned int ns)
 {
 	if (cmd->scan_begin_src != TRIG_TIMER)
 		return;
@@ -926,8 +927,8 @@ static void labpc_set_ai_scan_period(struct comedi_cmd * cmd, unsigned int ns)
 	cmd->scan_begin_arg = ns;
 }
 
-static int labpc_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int labpc_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	int tmp, tmp2;
@@ -980,7 +981,7 @@ static int labpc_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice
 		cmd->stop_src != TRIG_EXT && cmd->stop_src != TRIG_NONE)
 		err++;
 
-	// can't have external stop and start triggers at once
+	/*  can't have external stop and start triggers at once */
 	if (cmd->start_src == TRIG_EXT && cmd->stop_src == TRIG_EXT)
 		err++;
 
@@ -1008,7 +1009,7 @@ static int labpc_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice
 			err++;
 		}
 	}
-	// make sure scan timing is not too fast
+	/*  make sure scan timing is not too fast */
 	if (cmd->scan_begin_src == TRIG_TIMER) {
 		if (cmd->convert_src == TRIG_TIMER &&
 			cmd->scan_begin_arg <
@@ -1024,7 +1025,7 @@ static int labpc_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice
 			err++;
 		}
 	}
-	// stop source
+	/*  stop source */
 	switch (cmd->stop_src) {
 	case TRIG_COUNT:
 		if (!cmd->stop_arg) {
@@ -1038,7 +1039,7 @@ static int labpc_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice
 			err++;
 		}
 		break;
-		// TRIG_EXT doesn't care since it doesn't trigger off a numbered channel
+		/*  TRIG_EXT doesn't care since it doesn't trigger off a numbered channel */
 	default:
 		break;
 	}
@@ -1063,7 +1064,7 @@ static int labpc_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice
 	return 0;
 }
 
-static int labpc_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	int channel, range, aref;
 	unsigned long irq_flags;
@@ -1081,77 +1082,77 @@ static int labpc_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 	range = CR_RANGE(cmd->chanlist[0]);
 	aref = CR_AREF(cmd->chanlist[0]);
 
-	// make sure board is disabled before setting up aquisition
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	/*  make sure board is disabled before setting up aquisition */
+	spin_lock_irqsave(&dev->spinlock, flags);
 	devpriv->command2_bits &= ~SWTRIG_BIT & ~HWTRIG_BIT & ~PRETRIG_BIT;
 	devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG);
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
 	devpriv->command3_bits = 0;
 	devpriv->write_byte(devpriv->command3_bits, dev->iobase + COMMAND3_REG);
 
-	// initialize software conversion count
+	/*  initialize software conversion count */
 	if (cmd->stop_src == TRIG_COUNT) {
 		devpriv->count = cmd->stop_arg * cmd->chanlist_len;
 	}
-	// setup hardware conversion counter
+	/*  setup hardware conversion counter */
 	if (cmd->stop_src == TRIG_EXT) {
-		// load counter a1 with count of 3 (pc+ manual says this is minimum allowed) using mode 0
+		/*  load counter a1 with count of 3 (pc+ manual says this is minimum allowed) using mode 0 */
 		ret = labpc_counter_load(dev, dev->iobase + COUNTER_A_BASE_REG,
 			1, 3, 0);
 		if (ret < 0) {
 			comedi_error(dev, "error loading counter a1");
 			return -1;
 		}
-	} else			// otherwise, just put a1 in mode 0 with no count to set its output low
+	} else			/*  otherwise, just put a1 in mode 0 with no count to set its output low */
 		devpriv->write_byte(INIT_A1_BITS,
 			dev->iobase + COUNTER_A_CONTROL_REG);
 
-	// figure out what method we will use to transfer data
-	if (devpriv->dma_chan &&	// need a dma channel allocated
-		// dma unsafe at RT priority, and too much setup time for TRIG_WAKE_EOS for
+	/*  figure out what method we will use to transfer data */
+	if (devpriv->dma_chan &&	/*  need a dma channel allocated */
+		/*  dma unsafe at RT priority, and too much setup time for TRIG_WAKE_EOS for */
 		(cmd->flags & (TRIG_WAKE_EOS | TRIG_RT)) == 0 &&
-		// only available on the isa boards
+		/*  only available on the isa boards */
 		thisboard->bustype == isa_bustype) {
 		xfer = isa_dma_transfer;
-	} else if (thisboard->register_layout == labpc_1200_layout &&	// pc-plus has no fifo-half full interrupt
-		// wake-end-of-scan should interrupt on fifo not empty
+	} else if (thisboard->register_layout == labpc_1200_layout &&	/*  pc-plus has no fifo-half full interrupt */
+		/*  wake-end-of-scan should interrupt on fifo not empty */
 		(cmd->flags & TRIG_WAKE_EOS) == 0 &&
-		// make sure we are taking more than just a few points
+		/*  make sure we are taking more than just a few points */
 		(cmd->stop_src != TRIG_COUNT || devpriv->count > 256)) {
 		xfer = fifo_half_full_transfer;
 	} else
 		xfer = fifo_not_empty_transfer;
 	devpriv->current_transfer = xfer;
 
-	// setup command6 register for 1200 boards
+	/*  setup command6 register for 1200 boards */
 	if (thisboard->register_layout == labpc_1200_layout) {
-		// reference inputs to ground or common?
+		/*  reference inputs to ground or common? */
 		if (aref != AREF_GROUND)
 			devpriv->command6_bits |= ADC_COMMON_BIT;
 		else
 			devpriv->command6_bits &= ~ADC_COMMON_BIT;
-		// bipolar or unipolar range?
+		/*  bipolar or unipolar range? */
 		if (thisboard->ai_range_is_unipolar[range])
 			devpriv->command6_bits |= ADC_UNIP_BIT;
 		else
 			devpriv->command6_bits &= ~ADC_UNIP_BIT;
-		// interrupt on fifo half full?
+		/*  interrupt on fifo half full? */
 		if (xfer == fifo_half_full_transfer)
 			devpriv->command6_bits |= ADC_FHF_INTR_EN_BIT;
 		else
 			devpriv->command6_bits &= ~ADC_FHF_INTR_EN_BIT;
-		// enable interrupt on counter a1 terminal count?
+		/*  enable interrupt on counter a1 terminal count? */
 		if (cmd->stop_src == TRIG_EXT)
 			devpriv->command6_bits |= A1_INTR_EN_BIT;
 		else
 			devpriv->command6_bits &= ~A1_INTR_EN_BIT;
-		// are we scanning up or down through channels?
+		/*  are we scanning up or down through channels? */
 		if (labpc_ai_scan_mode(cmd) == MODE_MULT_CHAN_UP)
 			devpriv->command6_bits |= ADC_SCAN_UP_BIT;
 		else
 			devpriv->command6_bits &= ~ADC_SCAN_UP_BIT;
-		// write to register
+		/*  write to register */
 		devpriv->write_byte(devpriv->command6_bits,
 			dev->iobase + COMMAND6_REG);
 	}
@@ -1162,23 +1163,23 @@ static int labpc_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 		channel = CR_CHAN(cmd->chanlist[cmd->chanlist_len - 1]);
 	else
 		channel = CR_CHAN(cmd->chanlist[0]);
-	// munge channel bits for differential / scan disabled mode
+	/*  munge channel bits for differential / scan disabled mode */
 	if (labpc_ai_scan_mode(cmd) != MODE_SINGLE_CHAN && aref == AREF_DIFF)
 		channel *= 2;
 	devpriv->command1_bits |= ADC_CHAN_BITS(channel);
 	devpriv->command1_bits |= thisboard->ai_range_code[range];
 	devpriv->write_byte(devpriv->command1_bits, dev->iobase + COMMAND1_REG);
-	// manual says to set scan enable bit on second pass
+	/*  manual says to set scan enable bit on second pass */
 	if (labpc_ai_scan_mode(cmd) == MODE_MULT_CHAN_UP ||
 		labpc_ai_scan_mode(cmd) == MODE_MULT_CHAN_DOWN) {
 		devpriv->command1_bits |= ADC_SCAN_EN_BIT;
 		/* need a brief delay before enabling scan, or scan list will get screwed when you switch
 		 * between scan up to scan down mode - dunno why */
-		comedi_udelay(1);
+		udelay(1);
 		devpriv->write_byte(devpriv->command1_bits,
 			dev->iobase + COMMAND1_REG);
 	}
-	// setup any external triggering/pacing (command4 register)
+	/*  setup any external triggering/pacing (command4 register) */
 	devpriv->command4_bits = 0;
 	if (cmd->convert_src != TRIG_EXT)
 		devpriv->command4_bits |= EXT_CONVERT_DISABLE_BIT;
@@ -1189,21 +1190,21 @@ static int labpc_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 		if (cmd->scan_begin_src == TRIG_EXT)
 			devpriv->command4_bits |= EXT_SCAN_EN_BIT;
 	}
-	// single-ended/differential
+	/*  single-ended/differential */
 	if (aref == AREF_DIFF)
 		devpriv->command4_bits |= ADC_DIFF_BIT;
 	devpriv->write_byte(devpriv->command4_bits, dev->iobase + COMMAND4_REG);
 
 	devpriv->write_byte(cmd->chanlist_len,
 		dev->iobase + INTERVAL_COUNT_REG);
-	// load count
+	/*  load count */
 	devpriv->write_byte(INTERVAL_LOAD_BITS,
 		dev->iobase + INTERVAL_LOAD_REG);
 
 	if (cmd->convert_src == TRIG_TIMER || cmd->scan_begin_src == TRIG_TIMER) {
-		// set up pacing
+		/*  set up pacing */
 		labpc_adc_timing(dev, cmd);
-		// load counter b0 in mode 3
+		/*  load counter b0 in mode 3 */
 		ret = labpc_counter_load(dev, dev->iobase + COUNTER_B_BASE_REG,
 			0, devpriv->divisor_b0, 3);
 		if (ret < 0) {
@@ -1211,9 +1212,9 @@ static int labpc_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 			return -1;
 		}
 	}
-	// set up conversion pacing
+	/*  set up conversion pacing */
 	if (labpc_ai_convert_period(cmd)) {
-		// load counter a0 in mode 2
+		/*  load counter a0 in mode 2 */
 		ret = labpc_counter_load(dev, dev->iobase + COUNTER_A_BASE_REG,
 			0, devpriv->divisor_a0, 2);
 		if (ret < 0) {
@@ -1224,9 +1225,9 @@ static int labpc_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 		devpriv->write_byte(INIT_A0_BITS,
 			dev->iobase + COUNTER_A_CONTROL_REG);
 
-	// set up scan pacing
+	/*  set up scan pacing */
 	if (labpc_ai_scan_period(cmd)) {
-		// load counter b1 in mode 2
+		/*  load counter b1 in mode 2 */
 		ret = labpc_counter_load(dev, dev->iobase + COUNTER_B_BASE_REG,
 			1, devpriv->divisor_b1, 2);
 		if (ret < 0) {
@@ -1237,7 +1238,7 @@ static int labpc_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 
 	labpc_clear_adc_fifo(dev);
 
-	// set up dma transfer
+	/*  set up dma transfer */
 	if (xfer == isa_dma_transfer) {
 		irq_flags = claim_dma_lock();
 		disable_dma(devpriv->dma_chan);
@@ -1246,7 +1247,7 @@ static int labpc_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 		clear_dma_ff(devpriv->dma_chan);
 		set_dma_addr(devpriv->dma_chan,
 			virt_to_bus(devpriv->dma_buffer));
-		// set appropriate size of transfer
+		/*  set appropriate size of transfer */
 		devpriv->dma_transfer_size = labpc_suggest_transfer_size(*cmd);
 		if (cmd->stop_src == TRIG_COUNT &&
 			devpriv->count * sample_size <
@@ -1257,25 +1258,25 @@ static int labpc_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 		set_dma_count(devpriv->dma_chan, devpriv->dma_transfer_size);
 		enable_dma(devpriv->dma_chan);
 		release_dma_lock(irq_flags);
-		// enable board's dma
+		/*  enable board's dma */
 		devpriv->command3_bits |= DMA_EN_BIT | DMATC_INTR_EN_BIT;
 	} else
 		devpriv->command3_bits &= ~DMA_EN_BIT & ~DMATC_INTR_EN_BIT;
 
-	// enable error interrupts
+	/*  enable error interrupts */
 	devpriv->command3_bits |= ERR_INTR_EN_BIT;
-	// enable fifo not empty interrupt?
+	/*  enable fifo not empty interrupt? */
 	if (xfer == fifo_not_empty_transfer)
 		devpriv->command3_bits |= ADC_FNE_INTR_EN_BIT;
 	else
 		devpriv->command3_bits &= ~ADC_FNE_INTR_EN_BIT;
 	devpriv->write_byte(devpriv->command3_bits, dev->iobase + COMMAND3_REG);
 
-	// startup aquisition
+	/*  startup aquisition */
 
-	// command2 reg
-	// use 2 cascaded counters for pacing
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	/*  command2 reg */
+	/*  use 2 cascaded counters for pacing */
+	spin_lock_irqsave(&dev->spinlock, flags);
 	devpriv->command2_bits |= CASCADE_BIT;
 	switch (cmd->start_src) {
 	case TRIG_EXT:
@@ -1303,13 +1304,13 @@ static int labpc_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 		return -1;
 	}
 	devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG);
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
 	return 0;
 }
 
 /* interrupt service routine */
-static irqreturn_t labpc_interrupt(int irq, void *d PT_REGS_ARG)
+static irqreturn_t labpc_interrupt(int irq, void *d)
 {
 	struct comedi_device *dev = d;
 	struct comedi_subdevice *s = dev->read_subdev;
@@ -1325,7 +1326,7 @@ static irqreturn_t labpc_interrupt(int irq, void *d PT_REGS_ARG)
 	cmd = &async->cmd;
 	async->events = 0;
 
-	// read board status
+	/*  read board status */
 	devpriv->status1_bits = devpriv->read_byte(dev->iobase + STATUS1_REG);
 	if (thisboard->register_layout == labpc_1200_layout)
 		devpriv->status2_bits =
@@ -1339,7 +1340,7 @@ static irqreturn_t labpc_interrupt(int irq, void *d PT_REGS_ARG)
 	}
 
 	if (devpriv->status1_bits & OVERRUN_BIT) {
-		// clear error interrupt
+		/*  clear error interrupt */
 		devpriv->write_byte(0x1, dev->iobase + ADC_CLEAR_REG);
 		async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA;
 		comedi_event(dev, s);
@@ -1348,7 +1349,7 @@ static irqreturn_t labpc_interrupt(int irq, void *d PT_REGS_ARG)
 	}
 
 	if (devpriv->current_transfer == isa_dma_transfer) {
-		// if a dma terminal count of external stop trigger has occurred
+		/*  if a dma terminal count of external stop trigger has occurred */
 		if (devpriv->status1_bits & DMATC_BIT ||
 			(thisboard->register_layout == labpc_1200_layout
 				&& devpriv->status2_bits & A1_TC_BIT)) {
@@ -1359,19 +1360,19 @@ static irqreturn_t labpc_interrupt(int irq, void *d PT_REGS_ARG)
 
 	if (devpriv->status1_bits & TIMER_BIT) {
 		comedi_error(dev, "handled timer interrupt?");
-		// clear it
+		/*  clear it */
 		devpriv->write_byte(0x1, dev->iobase + TIMER_CLEAR_REG);
 	}
 
 	if (devpriv->status1_bits & OVERFLOW_BIT) {
-		// clear error interrupt
+		/*  clear error interrupt */
 		devpriv->write_byte(0x1, dev->iobase + ADC_CLEAR_REG);
 		async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA;
 		comedi_event(dev, s);
 		comedi_error(dev, "overflow");
 		return IRQ_HANDLED;
 	}
-	// handle external stop trigger
+	/*  handle external stop trigger */
 	if (cmd->stop_src == TRIG_EXT) {
 		if (devpriv->status2_bits & A1_TC_BIT) {
 			labpc_drain_dregs(dev);
@@ -1392,8 +1393,8 @@ static irqreturn_t labpc_interrupt(int irq, void *d PT_REGS_ARG)
 	return IRQ_HANDLED;
 }
 
-// read all available samples from ai fifo
-static int labpc_drain_fifo(struct comedi_device * dev)
+/* read all available samples from ai fifo */
+static int labpc_drain_fifo(struct comedi_device *dev)
 {
 	unsigned int lsb, msb;
 	short data;
@@ -1405,7 +1406,7 @@ static int labpc_drain_fifo(struct comedi_device * dev)
 
 	for (i = 0; (devpriv->status1_bits & DATA_AVAIL_BIT) && i < timeout;
 		i++) {
-		// quit if we have all the data we want
+		/*  quit if we have all the data we want */
 		if (async->cmd.stop_src == TRIG_COUNT) {
 			if (devpriv->count == 0)
 				break;
@@ -1427,7 +1428,7 @@ static int labpc_drain_fifo(struct comedi_device * dev)
 	return 0;
 }
 
-static void labpc_drain_dma(struct comedi_device * dev)
+static void labpc_drain_dma(struct comedi_device *dev)
 {
 	struct comedi_subdevice *s = dev->read_subdev;
 	struct comedi_async *async = s->async;
@@ -1444,7 +1445,7 @@ static void labpc_drain_dma(struct comedi_device * dev)
 	 * count and address get set correctly */
 	clear_dma_ff(devpriv->dma_chan);
 
-	// figure out how many points to read
+	/*  figure out how many points to read */
 	max_points = devpriv->dma_transfer_size / sample_size;
 	/* residue is the number of points left to be done on the dma
 	 * transfer.  It should always be zero at this point unless
@@ -1455,7 +1456,7 @@ static void labpc_drain_dma(struct comedi_device * dev)
 	if (devpriv->count < num_points && async->cmd.stop_src == TRIG_COUNT)
 		num_points = devpriv->count;
 
-	// figure out how many points will be stored next time
+	/*  figure out how many points will be stored next time */
 	leftover = 0;
 	if (async->cmd.stop_src != TRIG_COUNT) {
 		leftover = devpriv->dma_transfer_size / sample_size;
@@ -1472,7 +1473,7 @@ static void labpc_drain_dma(struct comedi_device * dev)
 	if (async->cmd.stop_src == TRIG_COUNT)
 		devpriv->count -= num_points;
 
-	// set address and count for next transfer
+	/*  set address and count for next transfer */
 	set_dma_addr(devpriv->dma_chan, virt_to_bus(devpriv->dma_buffer));
 	set_dma_count(devpriv->dma_chan, leftover * sample_size);
 	release_dma_lock(flags);
@@ -1480,19 +1481,19 @@ static void labpc_drain_dma(struct comedi_device * dev)
 	async->events |= COMEDI_CB_BLOCK;
 }
 
-static void handle_isa_dma(struct comedi_device * dev)
+static void handle_isa_dma(struct comedi_device *dev)
 {
 	labpc_drain_dma(dev);
 
 	enable_dma(devpriv->dma_chan);
 
-	// clear dma tc interrupt
+	/*  clear dma tc interrupt */
 	devpriv->write_byte(0x1, dev->iobase + DMATC_CLEAR_REG);
 }
 
 /* makes sure all data aquired by board is transfered to comedi (used
  * when aquisition is terminated by stop_src == TRIG_EXT). */
-static void labpc_drain_dregs(struct comedi_device * dev)
+static void labpc_drain_dregs(struct comedi_device *dev)
 {
 	if (devpriv->current_transfer == isa_dma_transfer)
 		labpc_drain_dma(dev);
@@ -1500,8 +1501,8 @@ static void labpc_drain_dregs(struct comedi_device * dev)
 	labpc_drain_fifo(dev);
 }
 
-static int labpc_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int labpc_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i, n;
 	int chan, range;
@@ -1509,13 +1510,13 @@ static int labpc_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice *
 	int timeout = 1000;
 	unsigned long flags;
 
-	// disable timed conversions
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	/*  disable timed conversions */
+	spin_lock_irqsave(&dev->spinlock, flags);
 	devpriv->command2_bits &= ~SWTRIG_BIT & ~HWTRIG_BIT & ~PRETRIG_BIT;
 	devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG);
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
-	// disable interrupt generation and dma
+	/*  disable interrupt generation and dma */
 	devpriv->command3_bits = 0;
 	devpriv->write_byte(devpriv->command3_bits, dev->iobase + COMMAND3_REG);
 
@@ -1524,41 +1525,41 @@ static int labpc_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice *
 	chan = CR_CHAN(insn->chanspec);
 	range = CR_RANGE(insn->chanspec);
 	devpriv->command1_bits |= thisboard->ai_range_code[range];
-	// munge channel bits for differential/scan disabled mode
+	/*  munge channel bits for differential/scan disabled mode */
 	if (CR_AREF(insn->chanspec) == AREF_DIFF)
 		chan *= 2;
 	devpriv->command1_bits |= ADC_CHAN_BITS(chan);
 	devpriv->write_byte(devpriv->command1_bits, dev->iobase + COMMAND1_REG);
 
-	// setup command6 register for 1200 boards
+	/*  setup command6 register for 1200 boards */
 	if (thisboard->register_layout == labpc_1200_layout) {
-		// reference inputs to ground or common?
+		/*  reference inputs to ground or common? */
 		if (CR_AREF(insn->chanspec) != AREF_GROUND)
 			devpriv->command6_bits |= ADC_COMMON_BIT;
 		else
 			devpriv->command6_bits &= ~ADC_COMMON_BIT;
-		// bipolar or unipolar range?
+		/*  bipolar or unipolar range? */
 		if (thisboard->ai_range_is_unipolar[range])
 			devpriv->command6_bits |= ADC_UNIP_BIT;
 		else
 			devpriv->command6_bits &= ~ADC_UNIP_BIT;
-		// don't interrupt on fifo half full
+		/*  don't interrupt on fifo half full */
 		devpriv->command6_bits &= ~ADC_FHF_INTR_EN_BIT;
-		// don't enable interrupt on counter a1 terminal count?
+		/*  don't enable interrupt on counter a1 terminal count? */
 		devpriv->command6_bits &= ~A1_INTR_EN_BIT;
-		// write to register
+		/*  write to register */
 		devpriv->write_byte(devpriv->command6_bits,
 			dev->iobase + COMMAND6_REG);
 	}
-	// setup command4 register
+	/*  setup command4 register */
 	devpriv->command4_bits = 0;
 	devpriv->command4_bits |= EXT_CONVERT_DISABLE_BIT;
-	// single-ended/differential
+	/*  single-ended/differential */
 	if (CR_AREF(insn->chanspec) == AREF_DIFF)
 		devpriv->command4_bits |= ADC_DIFF_BIT;
 	devpriv->write_byte(devpriv->command4_bits, dev->iobase + COMMAND4_REG);
 
-	// initialize pacer counter output to make sure it doesn't cause any problems
+	/*  initialize pacer counter output to make sure it doesn't cause any problems */
 	devpriv->write_byte(INIT_A0_BITS, dev->iobase + COUNTER_A_CONTROL_REG);
 
 	labpc_clear_adc_fifo(dev);
@@ -1571,7 +1572,7 @@ static int labpc_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice *
 			if (devpriv->read_byte(dev->iobase +
 					STATUS1_REG) & DATA_AVAIL_BIT)
 				break;
-			comedi_udelay(1);
+			udelay(1);
 		}
 		if (i == timeout) {
 			comedi_error(dev, "timeout");
@@ -1585,9 +1586,9 @@ static int labpc_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice *
 	return n;
 }
 
-// analog output insn
-static int labpc_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+/* analog output insn */
+static int labpc_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int channel, range;
 	unsigned long flags;
@@ -1595,56 +1596,56 @@ static int labpc_ao_winsn(struct comedi_device * dev, struct comedi_subdevice *
 
 	channel = CR_CHAN(insn->chanspec);
 
-	// turn off pacing of analog output channel
+	/*  turn off pacing of analog output channel */
 	/* note: hardware bug in daqcard-1200 means pacing cannot
 	 * be independently enabled/disabled for its the two channels */
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	spin_lock_irqsave(&dev->spinlock, flags);
 	devpriv->command2_bits &= ~DAC_PACED_BIT(channel);
 	devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG);
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
-	// set range
+	/*  set range */
 	if (thisboard->register_layout == labpc_1200_layout) {
 		range = CR_RANGE(insn->chanspec);
 		if (range & AO_RANGE_IS_UNIPOLAR)
 			devpriv->command6_bits |= DAC_UNIP_BIT(channel);
 		else
 			devpriv->command6_bits &= ~DAC_UNIP_BIT(channel);
-		// write to register
+		/*  write to register */
 		devpriv->write_byte(devpriv->command6_bits,
 			dev->iobase + COMMAND6_REG);
 	}
-	// send data
+	/*  send data */
 	lsb = data[0] & 0xff;
 	msb = (data[0] >> 8) & 0xff;
 	devpriv->write_byte(lsb, dev->iobase + DAC_LSB_REG(channel));
 	devpriv->write_byte(msb, dev->iobase + DAC_MSB_REG(channel));
 
-	// remember value for readback
+	/*  remember value for readback */
 	devpriv->ao_value[channel] = data[0];
 
 	return 1;
 }
 
-// analog output readback insn
-static int labpc_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+/* analog output readback insn */
+static int labpc_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	data[0] = devpriv->ao_value[CR_CHAN(insn->chanspec)];
 
 	return 1;
 }
 
-static int labpc_calib_read_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int labpc_calib_read_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	data[0] = devpriv->caldac[CR_CHAN(insn->chanspec)];
 
 	return 1;
 }
 
-static int labpc_calib_write_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int labpc_calib_write_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int channel = CR_CHAN(insn->chanspec);
 
@@ -1652,21 +1653,21 @@ static int labpc_calib_write_insn(struct comedi_device * dev, struct comedi_subd
 	return 1;
 }
 
-static int labpc_eeprom_read_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int labpc_eeprom_read_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	data[0] = devpriv->eeprom_data[CR_CHAN(insn->chanspec)];
 
 	return 1;
 }
 
-static int labpc_eeprom_write_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int labpc_eeprom_write_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int channel = CR_CHAN(insn->chanspec);
 	int ret;
 
-	// only allow writes to user area of eeprom
+	/*  only allow writes to user area of eeprom */
 	if (channel < 16 || channel > 127) {
 		printk("eeprom writes are only allowed to channels 16 through 127 (the pointer and user areas)");
 		return -EINVAL;
@@ -1679,7 +1680,7 @@ static int labpc_eeprom_write_insn(struct comedi_device * dev, struct comedi_sub
 	return 1;
 }
 
-// utility function that suggests a dma transfer size in bytes
+/* utility function that suggests a dma transfer size in bytes */
 static unsigned int labpc_suggest_transfer_size(struct comedi_cmd cmd)
 {
 	unsigned int size;
@@ -1687,14 +1688,14 @@ static unsigned int labpc_suggest_transfer_size(struct comedi_cmd cmd)
 
 	if (cmd.convert_src == TRIG_TIMER)
 		freq = 1000000000 / cmd.convert_arg;
-	// return some default value
+	/*  return some default value */
 	else
 		freq = 0xffffffff;
 
-	// make buffer fill in no more than 1/3 second
+	/*  make buffer fill in no more than 1/3 second */
 	size = (freq / 3) * sample_size;
 
-	// set a minimum and maximum size allowed
+	/*  set a minimum and maximum size allowed */
 	if (size > dma_buffer_size)
 		size = dma_buffer_size - dma_buffer_size % sample_size;
 	else if (size < sample_size)
@@ -1703,16 +1704,16 @@ static unsigned int labpc_suggest_transfer_size(struct comedi_cmd cmd)
 	return size;
 }
 
-// figures out what counter values to use based on command
-static void labpc_adc_timing(struct comedi_device * dev, struct comedi_cmd * cmd)
+/* figures out what counter values to use based on command */
+static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd)
 {
-	const int max_counter_value = 0x10000;	// max value for 16 bit counter in mode 2
-	const int min_counter_value = 2;	// min value for 16 bit counter in mode 2
+	const int max_counter_value = 0x10000;	/*  max value for 16 bit counter in mode 2 */
+	const int min_counter_value = 2;	/*  min value for 16 bit counter in mode 2 */
 	unsigned int base_period;
 
-	// if both convert and scan triggers are TRIG_TIMER, then they both rely on counter b0
+	/*  if both convert and scan triggers are TRIG_TIMER, then they both rely on counter b0 */
 	if (labpc_ai_convert_period(cmd) && labpc_ai_scan_period(cmd)) {
-		// pick the lowest b0 divisor value we can (for maximum input clock speed on convert and scan counters)
+		/*  pick the lowest b0 divisor value we can (for maximum input clock speed on convert and scan counters) */
 		devpriv->divisor_b0 = (labpc_ai_scan_period(cmd) - 1) /
 			(LABPC_TIMER_BASE * max_counter_value) + 1;
 		if (devpriv->divisor_b0 < min_counter_value)
@@ -1722,7 +1723,7 @@ static void labpc_adc_timing(struct comedi_device * dev, struct comedi_cmd * cmd
 
 		base_period = LABPC_TIMER_BASE * devpriv->divisor_b0;
 
-		// set a0 for conversion frequency and b1 for scan frequency
+		/*  set a0 for conversion frequency and b1 for scan frequency */
 		switch (cmd->flags & TRIG_ROUND_MASK) {
 		default:
 		case TRIG_ROUND_NEAREST:
@@ -1748,7 +1749,7 @@ static void labpc_adc_timing(struct comedi_device * dev, struct comedi_cmd * cmd
 				labpc_ai_scan_period(cmd) / base_period;
 			break;
 		}
-		// make sure a0 and b1 values are acceptable
+		/*  make sure a0 and b1 values are acceptable */
 		if (devpriv->divisor_a0 < min_counter_value)
 			devpriv->divisor_a0 = min_counter_value;
 		if (devpriv->divisor_a0 > max_counter_value)
@@ -1757,12 +1758,12 @@ static void labpc_adc_timing(struct comedi_device * dev, struct comedi_cmd * cmd
 			devpriv->divisor_b1 = min_counter_value;
 		if (devpriv->divisor_b1 > max_counter_value)
 			devpriv->divisor_b1 = max_counter_value;
-		// write corrected timings to command
+		/*  write corrected timings to command */
 		labpc_set_ai_convert_period(cmd,
 			base_period * devpriv->divisor_a0);
 		labpc_set_ai_scan_period(cmd,
 			base_period * devpriv->divisor_b1);
-		// if only one TRIG_TIMER is used, we can employ the generic cascaded timing functions
+		/*  if only one TRIG_TIMER is used, we can employ the generic cascaded timing functions */
 	} else if (labpc_ai_scan_period(cmd)) {
 		unsigned int scan_period;
 
@@ -1795,51 +1796,51 @@ static int labpc_dio_mem_callback(int dir, int port, int data,
 	}
 }
 
-// lowlevel write to eeprom/dac
-static void labpc_serial_out(struct comedi_device * dev, unsigned int value,
+/* lowlevel write to eeprom/dac */
+static void labpc_serial_out(struct comedi_device *dev, unsigned int value,
 	unsigned int value_width)
 {
 	int i;
 
 	for (i = 1; i <= value_width; i++) {
-		// clear serial clock
+		/*  clear serial clock */
 		devpriv->command5_bits &= ~SCLOCK_BIT;
-		// send bits most significant bit first
+		/*  send bits most significant bit first */
 		if (value & (1 << (value_width - i)))
 			devpriv->command5_bits |= SDATA_BIT;
 		else
 			devpriv->command5_bits &= ~SDATA_BIT;
-		comedi_udelay(1);
+		udelay(1);
 		devpriv->write_byte(devpriv->command5_bits,
 			dev->iobase + COMMAND5_REG);
-		// set clock to load bit
+		/*  set clock to load bit */
 		devpriv->command5_bits |= SCLOCK_BIT;
-		comedi_udelay(1);
+		udelay(1);
 		devpriv->write_byte(devpriv->command5_bits,
 			dev->iobase + COMMAND5_REG);
 	}
 }
 
-// lowlevel read from eeprom
-static unsigned int labpc_serial_in(struct comedi_device * dev)
+/* lowlevel read from eeprom */
+static unsigned int labpc_serial_in(struct comedi_device *dev)
 {
 	unsigned int value = 0;
 	int i;
-	const int value_width = 8;	// number of bits wide values are
+	const int value_width = 8;	/*  number of bits wide values are */
 
 	for (i = 1; i <= value_width; i++) {
-		// set serial clock
+		/*  set serial clock */
 		devpriv->command5_bits |= SCLOCK_BIT;
-		comedi_udelay(1);
+		udelay(1);
 		devpriv->write_byte(devpriv->command5_bits,
 			dev->iobase + COMMAND5_REG);
-		// clear clock bit
+		/*  clear clock bit */
 		devpriv->command5_bits &= ~SCLOCK_BIT;
-		comedi_udelay(1);
+		udelay(1);
 		devpriv->write_byte(devpriv->command5_bits,
 			dev->iobase + COMMAND5_REG);
-		// read bits most significant bit first
-		comedi_udelay(1);
+		/*  read bits most significant bit first */
+		udelay(1);
 		devpriv->status2_bits =
 			devpriv->read_byte(dev->iobase + STATUS2_REG);
 		if (devpriv->status2_bits & EEPROM_OUT_BIT) {
@@ -1850,46 +1851,46 @@ static unsigned int labpc_serial_in(struct comedi_device * dev)
 	return value;
 }
 
-static unsigned int labpc_eeprom_read(struct comedi_device * dev, unsigned int address)
+static unsigned int labpc_eeprom_read(struct comedi_device *dev, unsigned int address)
 {
 	unsigned int value;
-	const int read_instruction = 0x3;	// bits to tell eeprom to expect a read
-	const int write_length = 8;	// 8 bit write lengths to eeprom
+	const int read_instruction = 0x3;	/*  bits to tell eeprom to expect a read */
+	const int write_length = 8;	/*  8 bit write lengths to eeprom */
 
-	// enable read/write to eeprom
+	/*  enable read/write to eeprom */
 	devpriv->command5_bits &= ~EEPROM_EN_BIT;
-	comedi_udelay(1);
+	udelay(1);
 	devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
 	devpriv->command5_bits |= EEPROM_EN_BIT | EEPROM_WRITE_UNPROTECT_BIT;
-	comedi_udelay(1);
+	udelay(1);
 	devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
 
-	// send read instruction
+	/*  send read instruction */
 	labpc_serial_out(dev, read_instruction, write_length);
-	// send 8 bit address to read from
+	/*  send 8 bit address to read from */
 	labpc_serial_out(dev, address, write_length);
-	// read result
+	/*  read result */
 	value = labpc_serial_in(dev);
 
-	// disable read/write to eeprom
+	/*  disable read/write to eeprom */
 	devpriv->command5_bits &= ~EEPROM_EN_BIT & ~EEPROM_WRITE_UNPROTECT_BIT;
-	comedi_udelay(1);
+	udelay(1);
 	devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
 
 	return value;
 }
 
-static unsigned int labpc_eeprom_write(struct comedi_device * dev,
+static unsigned int labpc_eeprom_write(struct comedi_device *dev,
 	unsigned int address, unsigned int value)
 {
 	const int write_enable_instruction = 0x6;
 	const int write_instruction = 0x2;
-	const int write_length = 8;	// 8 bit write lengths to eeprom
+	const int write_length = 8;	/*  8 bit write lengths to eeprom */
 	const int write_in_progress_bit = 0x1;
 	const int timeout = 10000;
 	int i;
 
-	// make sure there isn't already a write in progress
+	/*  make sure there isn't already a write in progress */
 	for (i = 0; i < timeout; i++) {
 		if ((labpc_eeprom_read_status(dev) & write_in_progress_bit) ==
 			0)
@@ -1899,96 +1900,96 @@ static unsigned int labpc_eeprom_write(struct comedi_device * dev,
 		comedi_error(dev, "eeprom write timed out");
 		return -ETIME;
 	}
-	// update software copy of eeprom
+	/*  update software copy of eeprom */
 	devpriv->eeprom_data[address] = value;
 
-	// enable read/write to eeprom
+	/*  enable read/write to eeprom */
 	devpriv->command5_bits &= ~EEPROM_EN_BIT;
-	comedi_udelay(1);
+	udelay(1);
 	devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
 	devpriv->command5_bits |= EEPROM_EN_BIT | EEPROM_WRITE_UNPROTECT_BIT;
-	comedi_udelay(1);
+	udelay(1);
 	devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
 
-	// send write_enable instruction
+	/*  send write_enable instruction */
 	labpc_serial_out(dev, write_enable_instruction, write_length);
 	devpriv->command5_bits &= ~EEPROM_EN_BIT;
-	comedi_udelay(1);
+	udelay(1);
 	devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
 
-	// send write instruction
+	/*  send write instruction */
 	devpriv->command5_bits |= EEPROM_EN_BIT;
-	comedi_udelay(1);
+	udelay(1);
 	devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
 	labpc_serial_out(dev, write_instruction, write_length);
-	// send 8 bit address to write to
+	/*  send 8 bit address to write to */
 	labpc_serial_out(dev, address, write_length);
-	// write value
+	/*  write value */
 	labpc_serial_out(dev, value, write_length);
 	devpriv->command5_bits &= ~EEPROM_EN_BIT;
-	comedi_udelay(1);
+	udelay(1);
 	devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
 
-	// disable read/write to eeprom
+	/*  disable read/write to eeprom */
 	devpriv->command5_bits &= ~EEPROM_EN_BIT & ~EEPROM_WRITE_UNPROTECT_BIT;
-	comedi_udelay(1);
+	udelay(1);
 	devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
 
 	return 0;
 }
 
-static unsigned int labpc_eeprom_read_status(struct comedi_device * dev)
+static unsigned int labpc_eeprom_read_status(struct comedi_device *dev)
 {
 	unsigned int value;
 	const int read_status_instruction = 0x5;
-	const int write_length = 8;	// 8 bit write lengths to eeprom
+	const int write_length = 8;	/*  8 bit write lengths to eeprom */
 
-	// enable read/write to eeprom
+	/*  enable read/write to eeprom */
 	devpriv->command5_bits &= ~EEPROM_EN_BIT;
-	comedi_udelay(1);
+	udelay(1);
 	devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
 	devpriv->command5_bits |= EEPROM_EN_BIT | EEPROM_WRITE_UNPROTECT_BIT;
-	comedi_udelay(1);
+	udelay(1);
 	devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
 
-	// send read status instruction
+	/*  send read status instruction */
 	labpc_serial_out(dev, read_status_instruction, write_length);
-	// read result
+	/*  read result */
 	value = labpc_serial_in(dev);
 
-	// disable read/write to eeprom
+	/*  disable read/write to eeprom */
 	devpriv->command5_bits &= ~EEPROM_EN_BIT & ~EEPROM_WRITE_UNPROTECT_BIT;
-	comedi_udelay(1);
+	udelay(1);
 	devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
 
 	return value;
 }
 
-// writes to 8 bit calibration dacs
-static void write_caldac(struct comedi_device * dev, unsigned int channel,
+/* writes to 8 bit calibration dacs */
+static void write_caldac(struct comedi_device *dev, unsigned int channel,
 	unsigned int value)
 {
 	if (value == devpriv->caldac[channel])
 		return;
 	devpriv->caldac[channel] = value;
 
-	// clear caldac load bit and make sure we don't write to eeprom
+	/*  clear caldac load bit and make sure we don't write to eeprom */
 	devpriv->command5_bits &=
 		~CALDAC_LOAD_BIT & ~EEPROM_EN_BIT & ~EEPROM_WRITE_UNPROTECT_BIT;
-	comedi_udelay(1);
+	udelay(1);
 	devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
 
-	// write 4 bit channel
+	/*  write 4 bit channel */
 	labpc_serial_out(dev, channel, 4);
-	// write 8 bit caldac value
+	/*  write 8 bit caldac value */
 	labpc_serial_out(dev, value, 8);
 
-	// set and clear caldac bit to load caldac value
+	/*  set and clear caldac bit to load caldac value */
 	devpriv->command5_bits |= CALDAC_LOAD_BIT;
-	comedi_udelay(1);
+	udelay(1);
 	devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
 	devpriv->command5_bits &= ~CALDAC_LOAD_BIT;
-	comedi_udelay(1);
+	udelay(1);
 	devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
 }
 
diff --git a/drivers/staging/comedi/drivers/ni_labpc.h b/drivers/staging/comedi/drivers/ni_labpc.h
index b44b0d3d02f..c5d2d212612 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.h
+++ b/drivers/staging/comedi/drivers/ni_labpc.h
@@ -24,59 +24,59 @@
 #ifndef _NI_LABPC_H
 #define _NI_LABPC_H
 
-#define EEPROM_SIZE	256	// 256 byte eeprom
-#define NUM_AO_CHAN	2	// boards have two analog output channels
+#define EEPROM_SIZE	256	/*  256 byte eeprom */
+#define NUM_AO_CHAN	2	/*  boards have two analog output channels */
 
 enum labpc_bustype { isa_bustype, pci_bustype, pcmcia_bustype };
 enum labpc_register_layout { labpc_plus_layout, labpc_1200_layout };
 enum transfer_type { fifo_not_empty_transfer, fifo_half_full_transfer,
 		isa_dma_transfer };
 
-typedef struct labpc_board_struct {
+struct labpc_board_struct {
 	const char *name;
-	int device_id;		// device id for pci and pcmcia boards
-	int ai_speed;		// maximum input speed in nanoseconds
-	enum labpc_bustype bustype;	// ISA/PCI/etc.
-	enum labpc_register_layout register_layout;	// 1200 has extra registers compared to pc+
-	int has_ao;		// has analog output true/false
+	int device_id;		/*  device id for pci and pcmcia boards */
+	int ai_speed;		/*  maximum input speed in nanoseconds */
+	enum labpc_bustype bustype;	/*  ISA/PCI/etc. */
+	enum labpc_register_layout register_layout;	/*  1200 has extra registers compared to pc+ */
+	int has_ao;		/*  has analog output true/false */
 	const struct comedi_lrange *ai_range_table;
 	const int *ai_range_code;
 	const int *ai_range_is_unipolar;
-	unsigned ai_scan_up:1;	// board can auto scan up in ai channels, not just down
+	unsigned ai_scan_up:1;	/*  board can auto scan up in ai channels, not just down */
 	unsigned memory_mapped_io:1;	/* uses memory mapped io instead of ioports */
-} labpc_board;
+};
 
-typedef struct {
-	struct mite_struct *mite;	// for mite chip on pci-1200
+struct labpc_private {
+	struct mite_struct *mite;	/*  for mite chip on pci-1200 */
 	volatile unsigned long long count;	/* number of data points left to be taken */
-	unsigned int ao_value[NUM_AO_CHAN];	// software copy of analog output values
-	// software copys of bits written to command registers
+	unsigned int ao_value[NUM_AO_CHAN];	/*  software copy of analog output values */
+	/*  software copys of bits written to command registers */
 	volatile unsigned int command1_bits;
 	volatile unsigned int command2_bits;
 	volatile unsigned int command3_bits;
 	volatile unsigned int command4_bits;
 	volatile unsigned int command5_bits;
 	volatile unsigned int command6_bits;
-	// store last read of board status registers
+	/*  store last read of board status registers */
 	volatile unsigned int status1_bits;
 	volatile unsigned int status2_bits;
 	unsigned int divisor_a0;	/* value to load into board's counter a0 (conversion pacing) for timed conversions */
 	unsigned int divisor_b0;	/* value to load into board's counter b0 (master) for timed conversions */
 	unsigned int divisor_b1;	/* value to load into board's counter b1 (scan pacing) for timed conversions */
-	unsigned int dma_chan;	// dma channel to use
-	u16 *dma_buffer;	// buffer ai will dma into
-	unsigned int dma_transfer_size;	// transfer size in bytes for current transfer
-	enum transfer_type current_transfer;	// we are using dma/fifo-half-full/etc.
-	unsigned int eeprom_data[EEPROM_SIZE];	// stores contents of board's eeprom
-	unsigned int caldac[16];	// stores settings of calibration dacs
-	// function pointers so we can use inb/outb or readb/writeb as appropriate
+	unsigned int dma_chan;	/*  dma channel to use */
+	u16 *dma_buffer;	/*  buffer ai will dma into */
+	unsigned int dma_transfer_size;	/*  transfer size in bytes for current transfer */
+	enum transfer_type current_transfer;	/*  we are using dma/fifo-half-full/etc. */
+	unsigned int eeprom_data[EEPROM_SIZE];	/*  stores contents of board's eeprom */
+	unsigned int caldac[16];	/*  stores settings of calibration dacs */
+	/*  function pointers so we can use inb/outb or readb/writeb as appropriate */
 	unsigned int (*read_byte) (unsigned long address);
 	void (*write_byte) (unsigned int byte, unsigned long address);
-} labpc_private;
+};
 
-int labpc_common_attach(struct comedi_device * dev, unsigned long iobase,
+int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
 	unsigned int irq, unsigned int dma);
-int labpc_common_detach(struct comedi_device * dev);
+int labpc_common_detach(struct comedi_device *dev);
 
 extern const int labpc_1200_is_unipolar[];
 extern const int labpc_1200_ai_gain_bits[];
diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c
index ac0ce2f58f5..fb56c03a1b9 100644
--- a/drivers/staging/comedi/drivers/ni_labpc_cs.c
+++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c
@@ -60,7 +60,7 @@ NI manuals:
 */
 
 #undef LABPC_DEBUG
-//#define LABPC_DEBUG   // enable debugging messages
+/* #define LABPC_DEBUG */   /*  enable debugging messages */
 
 #include "../comedidev.h"
 
@@ -79,64 +79,64 @@ NI manuals:
 
 static struct pcmcia_device *pcmcia_cur_dev = NULL;
 
-static int labpc_attach(struct comedi_device * dev, struct comedi_devconfig * it);
+static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it);
 
-static const labpc_board labpc_cs_boards[] = {
+static const struct labpc_board_struct labpc_cs_boards[] = {
 	{
-	      name:	"daqcard-1200",
-	      device_id:0x103,	// 0x10b is manufacturer id, 0x103 is device id
-	      ai_speed:10000,
-	      bustype:	pcmcia_bustype,
-	      register_layout:labpc_1200_layout,
-	      has_ao:	1,
-	      ai_range_table:&range_labpc_1200_ai,
-	      ai_range_code:labpc_1200_ai_gain_bits,
-	      ai_range_is_unipolar:labpc_1200_is_unipolar,
-	      ai_scan_up:0,
-	      memory_mapped_io:0,
+	.name = "daqcard-1200",
+	.device_id = 0x103,	/*  0x10b is manufacturer id, 0x103 is device id */
+	.ai_speed = 10000,
+	.bustype = pcmcia_bustype,
+	.register_layout = labpc_1200_layout,
+	.has_ao = 1,
+	.ai_range_table = &range_labpc_1200_ai,
+	.ai_range_code = labpc_1200_ai_gain_bits,
+	.ai_range_is_unipolar = labpc_1200_is_unipolar,
+	.ai_scan_up = 0,
+	.memory_mapped_io = 0,
 		},
 	/* duplicate entry, to support using alternate name */
 	{
-	      name:	"ni_labpc_cs",
-	      device_id:0x103,
-	      ai_speed:10000,
-	      bustype:	pcmcia_bustype,
-	      register_layout:labpc_1200_layout,
-	      has_ao:	1,
-	      ai_range_table:&range_labpc_1200_ai,
-	      ai_range_code:labpc_1200_ai_gain_bits,
-	      ai_range_is_unipolar:labpc_1200_is_unipolar,
-	      ai_scan_up:0,
-	      memory_mapped_io:0,
+	.name = "ni_labpc_cs",
+	.device_id = 0x103,
+	.ai_speed = 10000,
+	.bustype = pcmcia_bustype,
+	.register_layout = labpc_1200_layout,
+	.has_ao = 1,
+	.ai_range_table = &range_labpc_1200_ai,
+	.ai_range_code = labpc_1200_ai_gain_bits,
+	.ai_range_is_unipolar = labpc_1200_is_unipolar,
+	.ai_scan_up = 0,
+	.memory_mapped_io = 0,
 		},
 };
 
 /*
  * Useful for shorthand access to the particular board structure
  */
-#define thisboard ((const labpc_board *)dev->board_ptr)
+#define thisboard ((const struct labpc_board_struct *)dev->board_ptr)
 
 static struct comedi_driver driver_labpc_cs = {
 	.driver_name = "ni_labpc_cs",
 	.module = THIS_MODULE,
 	.attach = &labpc_attach,
 	.detach = &labpc_common_detach,
-	.num_names = sizeof(labpc_cs_boards) / sizeof(labpc_board),
+	.num_names = ARRAY_SIZE(labpc_cs_boards),
 	.board_name = &labpc_cs_boards[0].name,
-	.offset = sizeof(labpc_board),
+	.offset = sizeof(struct labpc_board_struct),
 };
 
-static int labpc_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	unsigned long iobase = 0;
 	unsigned int irq = 0;
 	struct pcmcia_device *link;
 
 	/* allocate and initialize dev->private */
-	if (alloc_private(dev, sizeof(labpc_private)) < 0)
+	if (alloc_private(dev, sizeof(struct labpc_private)) < 0)
 		return -ENOMEM;
 
-	// get base address, irq etc. based on bustype
+	/*  get base address, irq etc. based on bustype */
 	switch (thisboard->bustype) {
 	case pcmcia_bustype:
 		link = pcmcia_cur_dev;	/* XXX hack */
@@ -213,12 +213,12 @@ static void labpc_cs_detach(struct pcmcia_device *);
 
 static const dev_info_t dev_info = "daqcard-1200";
 
-typedef struct local_info_t {
+struct local_info_t {
 	struct pcmcia_device *link;
 	dev_node_t node;
 	int stop;
 	struct bus_operations *bus;
-} local_info_t;
+};
 
 /*======================================================================
 
@@ -234,12 +234,12 @@ typedef struct local_info_t {
 
 static int labpc_cs_attach(struct pcmcia_device *link)
 {
-	local_info_t *local;
+	struct local_info_t *local;
 
 	DEBUG(0, "labpc_cs_attach()\n");
 
 	/* Allocate space for private device-specific data */
-	local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
+	local = kzalloc(sizeof(struct local_info_t), GFP_KERNEL);
 	if (!local)
 		return -ENOMEM;
 	local->link = link;
@@ -287,7 +287,7 @@ static void labpc_cs_detach(struct pcmcia_device *link)
 	   detach().
 	 */
 	if (link->dev_node) {
-		((local_info_t *) link->priv)->stop = 1;
+		((struct local_info_t *) link->priv)->stop = 1;
 		labpc_release(link);
 	}
 
@@ -307,7 +307,7 @@ static void labpc_cs_detach(struct pcmcia_device *link)
 
 static void labpc_config(struct pcmcia_device *link)
 {
-	local_info_t *dev = link->priv;
+	struct local_info_t *dev = link->priv;
 	tuple_t tuple;
 	cisparse_t parse;
 	int last_ret;
@@ -327,15 +327,21 @@ static void labpc_config(struct pcmcia_device *link)
 	tuple.TupleData = buf;
 	tuple.TupleDataMax = sizeof(buf);
 	tuple.TupleOffset = 0;
-	if ((last_ret = pcmcia_get_first_tuple(link, &tuple))) {
+
+	last_ret = pcmcia_get_first_tuple(link, &tuple);
+	if (last_ret) {
 		cs_error(link, GetFirstTuple, last_ret);
 		goto cs_failed;
 	}
-	if ((last_ret = pcmcia_get_tuple_data(link, &tuple))) {
+
+	last_ret = pcmcia_get_tuple_data(link, &tuple);
+	if (last_ret) {
 		cs_error(link, GetTupleData, last_ret);
 		goto cs_failed;
 	}
-	if ((last_ret = pcmcia_parse_tuple(&tuple, &parse))) {
+
+	last_ret = pcmcia_parse_tuple(&tuple, &parse);
+	if (last_ret) {
 		cs_error(link, ParseTuple, last_ret);
 		goto cs_failed;
 	}
@@ -355,7 +361,8 @@ static void labpc_config(struct pcmcia_device *link)
 	   will only use the CIS to fill in implementation-defined details.
 	 */
 	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-	if ((last_ret = pcmcia_get_first_tuple(link, &tuple))) {
+	last_ret = pcmcia_get_first_tuple(link, &tuple);
+	if (last_ret) {
 		cs_error(link, GetFirstTuple, last_ret);
 		goto cs_failed;
 	}
@@ -422,7 +429,8 @@ static void labpc_config(struct pcmcia_device *link)
 		break;
 
 	      next_entry:
-		if ((last_ret = pcmcia_get_next_tuple(link, &tuple))) {
+		last_ret = pcmcia_get_next_tuple(link, &tuple);
+		if (last_ret) {
 			cs_error(link, GetNextTuple, last_ret);
 			goto cs_failed;
 		}
@@ -433,18 +441,21 @@ static void labpc_config(struct pcmcia_device *link)
 	   handler to the interrupt, unless the 'Handler' member of the
 	   irq structure is initialized.
 	 */
-	if (link->conf.Attributes & CONF_ENABLE_IRQ)
-		if ((last_ret = pcmcia_request_irq(link, &link->irq))) {
+	if (link->conf.Attributes & CONF_ENABLE_IRQ) {
+		last_ret = pcmcia_request_irq(link, &link->irq);
+		if (last_ret) {
 			cs_error(link, RequestIRQ, last_ret);
 			goto cs_failed;
 		}
+	}
 
 	/*
 	   This actually configures the PCMCIA socket -- setting up
 	   the I/O windows and the interrupt mapping, and putting the
 	   card and host interface into "Memory and IO" mode.
 	 */
-	if ((last_ret = pcmcia_request_configuration(link, &link->conf))) {
+	last_ret = pcmcia_request_configuration(link, &link->conf);
+	if (last_ret) {
 		cs_error(link, RequestConfiguration, last_ret);
 		goto cs_failed;
 	}
@@ -501,7 +512,7 @@ static void labpc_release(struct pcmcia_device *link)
 
 static int labpc_cs_suspend(struct pcmcia_device *link)
 {
-	local_info_t *local = link->priv;
+	struct local_info_t *local = link->priv;
 
 	/* Mark the device as stopped, to block IO until later */
 	local->stop = 1;
@@ -510,7 +521,7 @@ static int labpc_cs_suspend(struct pcmcia_device *link)
 
 static int labpc_cs_resume(struct pcmcia_device *link)
 {
-	local_info_t *local = link->priv;
+	struct local_info_t *local = link->priv;
 
 	local->stop = 0;
 	return 0;
diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c
index 542bd0dcd44..d727d7533fc 100644
--- a/drivers/staging/comedi/drivers/ni_mio_common.c
+++ b/drivers/staging/comedi/drivers/ni_mio_common.c
@@ -57,16 +57,17 @@
 		fully tested as yet. Terry Barnaby, BEAM Ltd.
 */
 
-//#define DEBUG_INTERRUPT
-//#define DEBUG_STATUS_A
-//#define DEBUG_STATUS_B
+/* #define DEBUG_INTERRUPT */
+/* #define DEBUG_STATUS_A */
+/* #define DEBUG_STATUS_B */
 
+#include <linux/interrupt.h>
 #include "8255.h"
 #include "mite.h"
 #include "comedi_fc.h"
 
 #ifndef MDPRINTK
-#define MDPRINTK(format,args...)
+#define MDPRINTK(format, args...)
 #endif
 
 /* A timeout count */
@@ -193,49 +194,49 @@ static const struct comedi_lrange *const ni_range_lkup[] = {
 	[ai_gain_6143] = &range_ni_S_ai_6143
 };
 
-static int ni_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int ni_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int ni_cdio_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd);
-static int ni_cdio_cmd(struct comedi_device * dev, struct comedi_subdevice * s);
-static int ni_cdio_cancel(struct comedi_device * dev, struct comedi_subdevice * s);
-static void handle_cdio_interrupt(struct comedi_device * dev);
-static int ni_cdo_inttrig(struct comedi_device * dev, struct comedi_subdevice * s,
+static int ni_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int ni_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int ni_cdio_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd);
+static int ni_cdio_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
+static int ni_cdio_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
+static void handle_cdio_interrupt(struct comedi_device *dev);
+static int ni_cdo_inttrig(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int trignum);
 
-static int ni_serial_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int ni_serial_hw_readwrite8(struct comedi_device * dev, struct comedi_subdevice * s,
+static int ni_serial_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int ni_serial_hw_readwrite8(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned char data_out, unsigned char *data_in);
-static int ni_serial_sw_readwrite8(struct comedi_device * dev, struct comedi_subdevice * s,
+static int ni_serial_sw_readwrite8(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned char data_out, unsigned char *data_in);
 
-static int ni_calib_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int ni_calib_insn_write(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int ni_calib_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int ni_calib_insn_write(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
-static int ni_eeprom_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int ni_m_series_eeprom_insn_read(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data);
+static int ni_eeprom_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int ni_m_series_eeprom_insn_read(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data);
 
-static int ni_pfi_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int ni_pfi_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static unsigned ni_old_get_pfi_routing(struct comedi_device * dev, unsigned chan);
+static int ni_pfi_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int ni_pfi_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static unsigned ni_old_get_pfi_routing(struct comedi_device *dev, unsigned chan);
 
-static void ni_rtsi_init(struct comedi_device * dev);
-static int ni_rtsi_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int ni_rtsi_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static void ni_rtsi_init(struct comedi_device *dev);
+static int ni_rtsi_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int ni_rtsi_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
-static void caldac_setup(struct comedi_device * dev, struct comedi_subdevice * s);
-static int ni_read_eeprom(struct comedi_device * dev, int addr);
+static void caldac_setup(struct comedi_device *dev, struct comedi_subdevice *s);
+static int ni_read_eeprom(struct comedi_device *dev, int addr);
 
 #ifdef DEBUG_STATUS_A
 static void ni_mio_print_status_a(int status);
@@ -248,58 +249,58 @@ static void ni_mio_print_status_b(int status);
 #define ni_mio_print_status_b(a)
 #endif
 
-static int ni_ai_reset(struct comedi_device * dev, struct comedi_subdevice * s);
+static int ni_ai_reset(struct comedi_device *dev, struct comedi_subdevice *s);
 #ifndef PCIDMA
-static void ni_handle_fifo_half_full(struct comedi_device * dev);
-static int ni_ao_fifo_half_empty(struct comedi_device * dev, struct comedi_subdevice * s);
+static void ni_handle_fifo_half_full(struct comedi_device *dev);
+static int ni_ao_fifo_half_empty(struct comedi_device *dev, struct comedi_subdevice *s);
 #endif
-static void ni_handle_fifo_dregs(struct comedi_device * dev);
-static int ni_ai_inttrig(struct comedi_device * dev, struct comedi_subdevice * s,
+static void ni_handle_fifo_dregs(struct comedi_device *dev);
+static int ni_ai_inttrig(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int trignum);
-static void ni_load_channelgain_list(struct comedi_device * dev, unsigned int n_chan,
+static void ni_load_channelgain_list(struct comedi_device *dev, unsigned int n_chan,
 	unsigned int *list);
-static void shutdown_ai_command(struct comedi_device * dev);
+static void shutdown_ai_command(struct comedi_device *dev);
 
-static int ni_ao_inttrig(struct comedi_device * dev, struct comedi_subdevice * s,
+static int ni_ao_inttrig(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int trignum);
 
-static int ni_ao_reset(struct comedi_device * dev, struct comedi_subdevice * s);
+static int ni_ao_reset(struct comedi_device *dev, struct comedi_subdevice *s);
 
 static int ni_8255_callback(int dir, int port, int data, unsigned long arg);
 
-static int ni_gpct_insn_write(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int ni_gpct_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int ni_gpct_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int ni_gpct_cmd(struct comedi_device * dev, struct comedi_subdevice * s);
-static int ni_gpct_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd);
-static int ni_gpct_cancel(struct comedi_device * dev, struct comedi_subdevice * s);
-static void handle_gpct_interrupt(struct comedi_device * dev,
+static int ni_gpct_insn_write(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int ni_gpct_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int ni_gpct_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int ni_gpct_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
+static int ni_gpct_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd);
+static int ni_gpct_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
+static void handle_gpct_interrupt(struct comedi_device *dev,
 	unsigned short counter_index);
 
-static int init_cs5529(struct comedi_device * dev);
-static int cs5529_do_conversion(struct comedi_device * dev, unsigned short *data);
-static int cs5529_ai_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int init_cs5529(struct comedi_device *dev);
+static int cs5529_do_conversion(struct comedi_device *dev, unsigned short *data);
+static int cs5529_ai_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 #ifdef NI_CS5529_DEBUG
-static unsigned int cs5529_config_read(struct comedi_device * dev,
+static unsigned int cs5529_config_read(struct comedi_device *dev,
 	unsigned int reg_select_bits);
 #endif
-static void cs5529_config_write(struct comedi_device * dev, unsigned int value,
+static void cs5529_config_write(struct comedi_device *dev, unsigned int value,
 	unsigned int reg_select_bits);
 
-static int ni_m_series_pwm_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int ni_6143_pwm_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int ni_m_series_pwm_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int ni_6143_pwm_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
-static int ni_set_master_clock(struct comedi_device * dev, unsigned source,
+static int ni_set_master_clock(struct comedi_device *dev, unsigned source,
 	unsigned period_ns);
-static void ack_a_interrupt(struct comedi_device * dev, unsigned short a_status);
-static void ack_b_interrupt(struct comedi_device * dev, unsigned short b_status);
+static void ack_a_interrupt(struct comedi_device *dev, unsigned short a_status);
+static void ack_b_interrupt(struct comedi_device *dev, unsigned short b_status);
 
 enum aimodes {
 	AIMODE_NONE = 0,
@@ -353,19 +354,19 @@ enum timebase_nanoseconds {
 
 static const int num_adc_stages_611x = 3;
 
-static void handle_a_interrupt(struct comedi_device * dev, unsigned short status,
+static void handle_a_interrupt(struct comedi_device *dev, unsigned short status,
 	unsigned ai_mite_status);
-static void handle_b_interrupt(struct comedi_device * dev, unsigned short status,
+static void handle_b_interrupt(struct comedi_device *dev, unsigned short status,
 	unsigned ao_mite_status);
-static void get_last_sample_611x(struct comedi_device * dev);
-static void get_last_sample_6143(struct comedi_device * dev);
+static void get_last_sample_611x(struct comedi_device *dev);
+static void get_last_sample_6143(struct comedi_device *dev);
 
-static inline void ni_set_bitfield(struct comedi_device * dev, int reg,
+static inline void ni_set_bitfield(struct comedi_device *dev, int reg,
 	unsigned bit_mask, unsigned bit_values)
 {
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&devpriv->soft_reg_copy_lock, flags);
+	spin_lock_irqsave(&devpriv->soft_reg_copy_lock, flags);
 	switch (reg) {
 	case Interrupt_A_Enable_Register:
 		devpriv->int_a_enable_reg &= ~bit_mask;
@@ -396,22 +397,22 @@ static inline void ni_set_bitfield(struct comedi_device * dev, int reg,
 		ni_writeb(devpriv->g0_g1_select_reg, G0_G1_Select);
 		break;
 	default:
-		rt_printk("Warning %s() called with invalid register\n",
-			__FUNCTION__);
-		rt_printk("reg is %d\n", reg);
+		printk("Warning %s() called with invalid register\n",
+			__func__);
+		printk("reg is %d\n", reg);
 		break;
 	}
 	mmiowb();
-	comedi_spin_unlock_irqrestore(&devpriv->soft_reg_copy_lock, flags);
+	spin_unlock_irqrestore(&devpriv->soft_reg_copy_lock, flags);
 }
 
 #ifdef PCIDMA
-static int ni_ai_drain_dma(struct comedi_device * dev);
+static int ni_ai_drain_dma(struct comedi_device *dev);
 
 /* DMA channel setup */
 
-// negative channel means no channel
-static inline void ni_set_ai_dma_channel(struct comedi_device * dev, int channel)
+/* negative channel means no channel */
+static inline void ni_set_ai_dma_channel(struct comedi_device *dev, int channel)
 {
 	unsigned bitfield;
 
@@ -425,8 +426,8 @@ static inline void ni_set_ai_dma_channel(struct comedi_device * dev, int channel
 	ni_set_bitfield(dev, AI_AO_Select, AI_DMA_Select_Mask, bitfield);
 }
 
-// negative channel means no channel
-static inline void ni_set_ao_dma_channel(struct comedi_device * dev, int channel)
+/* negative channel means no channel */
+static inline void ni_set_ao_dma_channel(struct comedi_device *dev, int channel)
 {
 	unsigned bitfield;
 
@@ -440,8 +441,8 @@ static inline void ni_set_ao_dma_channel(struct comedi_device * dev, int channel
 	ni_set_bitfield(dev, AI_AO_Select, AO_DMA_Select_Mask, bitfield);
 }
 
-// negative mite_channel means no channel
-static inline void ni_set_gpct_dma_channel(struct comedi_device * dev,
+/* negative mite_channel means no channel */
+static inline void ni_set_gpct_dma_channel(struct comedi_device *dev,
 	unsigned gpct_index, int mite_channel)
 {
 	unsigned bitfield;
@@ -455,12 +456,12 @@ static inline void ni_set_gpct_dma_channel(struct comedi_device * dev,
 		bitfield);
 }
 
-// negative mite_channel means no channel
-static inline void ni_set_cdo_dma_channel(struct comedi_device * dev, int mite_channel)
+/* negative mite_channel means no channel */
+static inline void ni_set_cdo_dma_channel(struct comedi_device *dev, int mite_channel)
 {
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&devpriv->soft_reg_copy_lock, flags);
+	spin_lock_irqsave(&devpriv->soft_reg_copy_lock, flags);
 	devpriv->cdio_dma_select_reg &= ~CDO_DMA_Select_Mask;
 	if (mite_channel >= 0) {
 		/*XXX just guessing ni_stc_dma_channel_select_bitfield() returns the right bits,
@@ -472,19 +473,19 @@ static inline void ni_set_cdo_dma_channel(struct comedi_device * dev, int mite_c
 	}
 	ni_writeb(devpriv->cdio_dma_select_reg, M_Offset_CDIO_DMA_Select);
 	mmiowb();
-	comedi_spin_unlock_irqrestore(&devpriv->soft_reg_copy_lock, flags);
+	spin_unlock_irqrestore(&devpriv->soft_reg_copy_lock, flags);
 }
 
-static int ni_request_ai_mite_channel(struct comedi_device * dev)
+static int ni_request_ai_mite_channel(struct comedi_device *dev)
 {
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+	spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
 	BUG_ON(devpriv->ai_mite_chan);
 	devpriv->ai_mite_chan =
 		mite_request_channel(devpriv->mite, devpriv->ai_mite_ring);
 	if (devpriv->ai_mite_chan == NULL) {
-		comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock,
+		spin_unlock_irqrestore(&devpriv->mite_channel_lock,
 			flags);
 		comedi_error(dev,
 			"failed to reserve mite dma channel for analog input.");
@@ -492,20 +493,20 @@ static int ni_request_ai_mite_channel(struct comedi_device * dev)
 	}
 	devpriv->ai_mite_chan->dir = COMEDI_INPUT;
 	ni_set_ai_dma_channel(dev, devpriv->ai_mite_chan->channel);
-	comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+	spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
 	return 0;
 }
 
-static int ni_request_ao_mite_channel(struct comedi_device * dev)
+static int ni_request_ao_mite_channel(struct comedi_device *dev)
 {
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+	spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
 	BUG_ON(devpriv->ao_mite_chan);
 	devpriv->ao_mite_chan =
 		mite_request_channel(devpriv->mite, devpriv->ao_mite_ring);
 	if (devpriv->ao_mite_chan == NULL) {
-		comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock,
+		spin_unlock_irqrestore(&devpriv->mite_channel_lock,
 			flags);
 		comedi_error(dev,
 			"failed to reserve mite dma channel for analog outut.");
@@ -513,24 +514,24 @@ static int ni_request_ao_mite_channel(struct comedi_device * dev)
 	}
 	devpriv->ao_mite_chan->dir = COMEDI_OUTPUT;
 	ni_set_ao_dma_channel(dev, devpriv->ao_mite_chan->channel);
-	comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+	spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
 	return 0;
 }
 
-static int ni_request_gpct_mite_channel(struct comedi_device * dev,
+static int ni_request_gpct_mite_channel(struct comedi_device *dev,
 	unsigned gpct_index, enum comedi_io_direction direction)
 {
 	unsigned long flags;
 	struct mite_channel *mite_chan;
 
 	BUG_ON(gpct_index >= NUM_GPCT);
-	comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+	spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
 	BUG_ON(devpriv->counter_dev->counters[gpct_index].mite_chan);
 	mite_chan =
 		mite_request_channel(devpriv->mite,
 		devpriv->gpct_mite_ring[gpct_index]);
 	if (mite_chan == NULL) {
-		comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock,
+		spin_unlock_irqrestore(&devpriv->mite_channel_lock,
 			flags);
 		comedi_error(dev,
 			"failed to reserve mite dma channel for counter.");
@@ -540,23 +541,23 @@ static int ni_request_gpct_mite_channel(struct comedi_device * dev,
 	ni_tio_set_mite_channel(&devpriv->counter_dev->counters[gpct_index],
 		mite_chan);
 	ni_set_gpct_dma_channel(dev, gpct_index, mite_chan->channel);
-	comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+	spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
 	return 0;
 }
 
-#endif // PCIDMA
+#endif /*  PCIDMA */
 
-static int ni_request_cdo_mite_channel(struct comedi_device * dev)
+static int ni_request_cdo_mite_channel(struct comedi_device *dev)
 {
 #ifdef PCIDMA
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+	spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
 	BUG_ON(devpriv->cdo_mite_chan);
 	devpriv->cdo_mite_chan =
 		mite_request_channel(devpriv->mite, devpriv->cdo_mite_ring);
 	if (devpriv->cdo_mite_chan == NULL) {
-		comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock,
+		spin_unlock_irqrestore(&devpriv->mite_channel_lock,
 			flags);
 		comedi_error(dev,
 			"failed to reserve mite dma channel for correlated digital outut.");
@@ -564,48 +565,48 @@ static int ni_request_cdo_mite_channel(struct comedi_device * dev)
 	}
 	devpriv->cdo_mite_chan->dir = COMEDI_OUTPUT;
 	ni_set_cdo_dma_channel(dev, devpriv->cdo_mite_chan->channel);
-	comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
-#endif // PCIDMA
+	spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+#endif /*  PCIDMA */
 	return 0;
 }
 
-static void ni_release_ai_mite_channel(struct comedi_device * dev)
+static void ni_release_ai_mite_channel(struct comedi_device *dev)
 {
 #ifdef PCIDMA
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+	spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
 	if (devpriv->ai_mite_chan) {
 		ni_set_ai_dma_channel(dev, -1);
 		mite_release_channel(devpriv->ai_mite_chan);
 		devpriv->ai_mite_chan = NULL;
 	}
-	comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
-#endif // PCIDMA
+	spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+#endif /*  PCIDMA */
 }
 
-static void ni_release_ao_mite_channel(struct comedi_device * dev)
+static void ni_release_ao_mite_channel(struct comedi_device *dev)
 {
 #ifdef PCIDMA
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+	spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
 	if (devpriv->ao_mite_chan) {
 		ni_set_ao_dma_channel(dev, -1);
 		mite_release_channel(devpriv->ao_mite_chan);
 		devpriv->ao_mite_chan = NULL;
 	}
-	comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
-#endif // PCIDMA
+	spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+#endif /*  PCIDMA */
 }
 
-void ni_release_gpct_mite_channel(struct comedi_device * dev, unsigned gpct_index)
+void ni_release_gpct_mite_channel(struct comedi_device *dev, unsigned gpct_index)
 {
 #ifdef PCIDMA
 	unsigned long flags;
 
 	BUG_ON(gpct_index >= NUM_GPCT);
-	comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+	spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
 	if (devpriv->counter_dev->counters[gpct_index].mite_chan) {
 		struct mite_channel *mite_chan =
 			devpriv->counter_dev->counters[gpct_index].mite_chan;
@@ -615,28 +616,28 @@ void ni_release_gpct_mite_channel(struct comedi_device * dev, unsigned gpct_inde
 			counters[gpct_index], NULL);
 		mite_release_channel(mite_chan);
 	}
-	comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
-#endif // PCIDMA
+	spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+#endif /*  PCIDMA */
 }
 
-static void ni_release_cdo_mite_channel(struct comedi_device * dev)
+static void ni_release_cdo_mite_channel(struct comedi_device *dev)
 {
 #ifdef PCIDMA
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+	spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
 	if (devpriv->cdo_mite_chan) {
 		ni_set_cdo_dma_channel(dev, -1);
 		mite_release_channel(devpriv->cdo_mite_chan);
 		devpriv->cdo_mite_chan = NULL;
 	}
-	comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
-#endif // PCIDMA
+	spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+#endif /*  PCIDMA */
 }
 
-// e-series boards use the second irq signals to generate dma requests for their counters
+/* e-series boards use the second irq signals to generate dma requests for their counters */
 #ifdef PCIDMA
-static void ni_e_series_enable_second_irq(struct comedi_device * dev,
+static void ni_e_series_enable_second_irq(struct comedi_device *dev,
 	unsigned gpct_index, short enable)
 {
 	if (boardtype.reg_type & ni_reg_m_series_mask)
@@ -665,15 +666,15 @@ static void ni_e_series_enable_second_irq(struct comedi_device * dev,
 		break;
 	}
 }
-#endif // PCIDMA
+#endif /*  PCIDMA */
 
-static void ni_clear_ai_fifo(struct comedi_device * dev)
+static void ni_clear_ai_fifo(struct comedi_device *dev)
 {
 	if (boardtype.reg_type == ni_reg_6143) {
-		// Flush the 6143 data FIFO
-		ni_writel(0x10, AIFIFO_Control_6143);	// Flush fifo
-		ni_writel(0x00, AIFIFO_Control_6143);	// Flush fifo
-		while (ni_readl(AIFIFO_Status_6143) & 0x10) ;	// Wait for complete
+		/*  Flush the 6143 data FIFO */
+		ni_writel(0x10, AIFIFO_Control_6143);	/*  Flush fifo */
+		ni_writel(0x00, AIFIFO_Control_6143);	/*  Flush fifo */
+		while (ni_readl(AIFIFO_Status_6143) & 0x10) ;	/*  Wait for complete */
 	} else {
 		devpriv->stc_writew(dev, 1, ADC_FIFO_Clear);
 		if (boardtype.reg_type == ni_reg_625x) {
@@ -693,13 +694,13 @@ static void ni_clear_ai_fifo(struct comedi_device * dev)
 	}
 }
 
-static void win_out2(struct comedi_device * dev, uint32_t data, int reg)
+static void win_out2(struct comedi_device *dev, uint32_t data, int reg)
 {
 	devpriv->stc_writew(dev, data >> 16, reg);
 	devpriv->stc_writew(dev, data & 0xffff, reg + 1);
 }
 
-static uint32_t win_in2(struct comedi_device * dev, int reg)
+static uint32_t win_in2(struct comedi_device *dev, int reg)
 {
 	uint32_t bits;
 	bits = devpriv->stc_readw(dev, reg) << 16;
@@ -707,36 +708,36 @@ static uint32_t win_in2(struct comedi_device * dev, int reg)
 	return bits;
 }
 
-#define ao_win_out(data,addr) ni_ao_win_outw(dev,data,addr)
-static inline void ni_ao_win_outw(struct comedi_device * dev, uint16_t data, int addr)
+#define ao_win_out(data, addr) ni_ao_win_outw(dev, data, addr)
+static inline void ni_ao_win_outw(struct comedi_device *dev, uint16_t data, int addr)
 {
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&devpriv->window_lock, flags);
+	spin_lock_irqsave(&devpriv->window_lock, flags);
 	ni_writew(addr, AO_Window_Address_611x);
 	ni_writew(data, AO_Window_Data_611x);
-	comedi_spin_unlock_irqrestore(&devpriv->window_lock, flags);
+	spin_unlock_irqrestore(&devpriv->window_lock, flags);
 }
 
-static inline void ni_ao_win_outl(struct comedi_device * dev, uint32_t data, int addr)
+static inline void ni_ao_win_outl(struct comedi_device *dev, uint32_t data, int addr)
 {
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&devpriv->window_lock, flags);
+	spin_lock_irqsave(&devpriv->window_lock, flags);
 	ni_writew(addr, AO_Window_Address_611x);
 	ni_writel(data, AO_Window_Data_611x);
-	comedi_spin_unlock_irqrestore(&devpriv->window_lock, flags);
+	spin_unlock_irqrestore(&devpriv->window_lock, flags);
 }
 
-static inline unsigned short ni_ao_win_inw(struct comedi_device * dev, int addr)
+static inline unsigned short ni_ao_win_inw(struct comedi_device *dev, int addr)
 {
 	unsigned long flags;
 	unsigned short data;
 
-	comedi_spin_lock_irqsave(&devpriv->window_lock, flags);
+	spin_lock_irqsave(&devpriv->window_lock, flags);
 	ni_writew(addr, AO_Window_Address_611x);
 	data = ni_readw(AO_Window_Data_611x);
-	comedi_spin_unlock_irqrestore(&devpriv->window_lock, flags);
+	spin_unlock_irqrestore(&devpriv->window_lock, flags);
 	return data;
 }
 
@@ -750,7 +751,7 @@ static inline unsigned short ni_ao_win_inw(struct comedi_device * dev, int addr)
 *
 * value should only be 1 or 0.
 */
-static inline void ni_set_bits(struct comedi_device * dev, int reg, unsigned bits,
+static inline void ni_set_bits(struct comedi_device *dev, int reg, unsigned bits,
 	unsigned value)
 {
 	unsigned bit_values;
@@ -762,7 +763,7 @@ static inline void ni_set_bits(struct comedi_device * dev, int reg, unsigned bit
 	ni_set_bitfield(dev, reg, bits, bit_values);
 }
 
-static irqreturn_t ni_E_interrupt(int irq, void *d PT_REGS_ARG)
+static irqreturn_t ni_E_interrupt(int irq, void *d)
 {
 	struct comedi_device *dev = d;
 	unsigned short a_status;
@@ -776,18 +777,17 @@ static irqreturn_t ni_E_interrupt(int irq, void *d PT_REGS_ARG)
 
 	if (dev->attached == 0)
 		return IRQ_NONE;
-	smp_mb();		// make sure dev->attached is checked before handler does anything else.
+	smp_mb();		/*  make sure dev->attached is checked before handler does anything else. */
 
-	// lock to avoid race with comedi_poll
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	/*  lock to avoid race with comedi_poll */
+	spin_lock_irqsave(&dev->spinlock, flags);
 	a_status = devpriv->stc_readw(dev, AI_Status_1_Register);
 	b_status = devpriv->stc_readw(dev, AO_Status_1_Register);
 #ifdef PCIDMA
 	if (mite) {
 		unsigned long flags_too;
 
-		comedi_spin_lock_irqsave(&devpriv->mite_channel_lock,
-			flags_too);
+		spin_lock_irqsave(&devpriv->mite_channel_lock, flags_too);
 		if (devpriv->ai_mite_chan) {
 			ai_mite_status = mite_get_status(devpriv->ai_mite_chan);
 			if (ai_mite_status & CHSR_LINKC)
@@ -804,8 +804,7 @@ static irqreturn_t ni_E_interrupt(int irq, void *d PT_REGS_ARG)
 					MITE_CHOR(devpriv->ao_mite_chan->
 						channel));
 		}
-		comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock,
-			flags_too);
+		spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags_too);
 	}
 #endif
 	ack_a_interrupt(dev, a_status);
@@ -818,20 +817,20 @@ static irqreturn_t ni_E_interrupt(int irq, void *d PT_REGS_ARG)
 	handle_gpct_interrupt(dev, 1);
 	handle_cdio_interrupt(dev);
 
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 	return IRQ_HANDLED;
 }
 
 #ifdef PCIDMA
-static void ni_sync_ai_dma(struct comedi_device * dev)
+static void ni_sync_ai_dma(struct comedi_device *dev)
 {
 	struct comedi_subdevice *s = dev->subdevices + NI_AI_SUBDEV;
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+	spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
 	if (devpriv->ai_mite_chan)
 		mite_sync_input_dma(devpriv->ai_mite_chan, s->async);
-	comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+	spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
 }
 
 static void mite_handle_b_linkc(struct mite_struct *mite, struct comedi_device * dev)
@@ -839,14 +838,14 @@ static void mite_handle_b_linkc(struct mite_struct *mite, struct comedi_device *
 	struct comedi_subdevice *s = dev->subdevices + NI_AO_SUBDEV;
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+	spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
 	if (devpriv->ao_mite_chan) {
 		mite_sync_output_dma(devpriv->ao_mite_chan, s->async);
 	}
-	comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+	spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
 }
 
-static int ni_ao_wait_for_dma_load(struct comedi_device * dev)
+static int ni_ao_wait_for_dma_load(struct comedi_device *dev)
 {
 	static const int timeout = 10000;
 	int i;
@@ -858,7 +857,7 @@ static int ni_ao_wait_for_dma_load(struct comedi_device * dev)
 			break;
 		/* if we poll too often, the pci bus activity seems
 		   to slow the dma transfer down */
-		comedi_udelay(10);
+		udelay(10);
 	}
 	if (i == timeout) {
 		comedi_error(dev, "timed out waiting for dma load");
@@ -867,8 +866,8 @@ static int ni_ao_wait_for_dma_load(struct comedi_device * dev)
 	return 0;
 }
 
-#endif //PCIDMA
-static void ni_handle_eos(struct comedi_device * dev, struct comedi_subdevice * s)
+#endif /* PCIDMA */
+static void ni_handle_eos(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	if (devpriv->aimode == AIMODE_SCAN) {
 #ifdef PCIDMA
@@ -879,7 +878,7 @@ static void ni_handle_eos(struct comedi_device * dev, struct comedi_subdevice *
 			ni_sync_ai_dma(dev);
 			if ((s->async->events & COMEDI_CB_EOS))
 				break;
-			comedi_udelay(1);
+			udelay(1);
 		}
 #else
 		ni_handle_fifo_dregs(dev);
@@ -892,7 +891,7 @@ static void ni_handle_eos(struct comedi_device * dev, struct comedi_subdevice *
 	}
 }
 
-static void shutdown_ai_command(struct comedi_device * dev)
+static void shutdown_ai_command(struct comedi_device *dev)
 {
 	struct comedi_subdevice *s = dev->subdevices + NI_AI_SUBDEV;
 
@@ -906,7 +905,7 @@ static void shutdown_ai_command(struct comedi_device * dev)
 	s->async->events |= COMEDI_CB_EOA;
 }
 
-static void ni_event(struct comedi_device * dev, struct comedi_subdevice * s)
+static void ni_event(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	if (s->async->
 		events & (COMEDI_CB_ERROR | COMEDI_CB_OVERFLOW | COMEDI_CB_EOA))
@@ -932,7 +931,7 @@ static void ni_event(struct comedi_device * dev, struct comedi_subdevice * s)
 	comedi_event(dev, s);
 }
 
-static void handle_gpct_interrupt(struct comedi_device * dev,
+static void handle_gpct_interrupt(struct comedi_device *dev,
 	unsigned short counter_index)
 {
 #ifdef PCIDMA
@@ -945,7 +944,7 @@ static void handle_gpct_interrupt(struct comedi_device * dev,
 #endif
 }
 
-static void ack_a_interrupt(struct comedi_device * dev, unsigned short a_status)
+static void ack_a_interrupt(struct comedi_device *dev, unsigned short a_status)
 {
 	unsigned short ack = 0;
 
@@ -966,17 +965,17 @@ static void ack_a_interrupt(struct comedi_device * dev, unsigned short a_status)
 		devpriv->stc_writew(dev, ack, Interrupt_A_Ack_Register);
 }
 
-static void handle_a_interrupt(struct comedi_device * dev, unsigned short status,
+static void handle_a_interrupt(struct comedi_device *dev, unsigned short status,
 	unsigned ai_mite_status)
 {
 	struct comedi_subdevice *s = dev->subdevices + NI_AI_SUBDEV;
 
-	//67xx boards don't have ai subdevice, but their gpct0 might generate an a interrupt
+	/* 67xx boards don't have ai subdevice, but their gpct0 might generate an a interrupt */
 	if (s->type == COMEDI_SUBD_UNUSED)
 		return;
 
 #ifdef DEBUG_INTERRUPT
-	rt_printk
+	printk
 		("ni_mio_common: interrupt: a_status=%04x ai_mite_status=%08x\n",
 		status, ai_mite_status);
 	ni_mio_print_status_a(status);
@@ -989,12 +988,12 @@ static void handle_a_interrupt(struct comedi_device * dev, unsigned short status
 	if (ai_mite_status & ~(CHSR_INT | CHSR_LINKC | CHSR_DONE | CHSR_MRDY |
 			CHSR_DRDY | CHSR_DRQ1 | CHSR_DRQ0 | CHSR_ERROR |
 			CHSR_SABORT | CHSR_XFERR | CHSR_LxERR_mask)) {
-		rt_printk
+		printk
 			("unknown mite interrupt, ack! (ai_mite_status=%08x)\n",
 			ai_mite_status);
-		//mite_print_chsr(ai_mite_status);
+		/* mite_print_chsr(ai_mite_status); */
 		s->async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA;
-		//disable_irq(dev->irq);
+		/* disable_irq(dev->irq); */
 	}
 #endif
 
@@ -1002,7 +1001,7 @@ static void handle_a_interrupt(struct comedi_device * dev, unsigned short status
 	if (status & (AI_Overrun_St | AI_Overflow_St | AI_SC_TC_Error_St |
 			AI_SC_TC_St | AI_START1_St)) {
 		if (status == 0xffff) {
-			rt_printk
+			printk
 				("ni_mio_common: a_status=0xffff.  Card removed?\n");
 			/* we probably aren't even running a command now,
 			 * so it's a good idea to be careful. */
@@ -1015,7 +1014,7 @@ static void handle_a_interrupt(struct comedi_device * dev, unsigned short status
 		}
 		if (status & (AI_Overrun_St | AI_Overflow_St |
 				AI_SC_TC_Error_St)) {
-			rt_printk("ni_mio_common: ai error a_status=%04x\n",
+			printk("ni_mio_common: ai error a_status=%04x\n",
 				status);
 			ni_mio_print_status_a(status);
 
@@ -1031,7 +1030,7 @@ static void handle_a_interrupt(struct comedi_device * dev, unsigned short status
 		}
 		if (status & AI_SC_TC_St) {
 #ifdef DEBUG_INTERRUPT
-			rt_printk("ni_mio_common: SC_TC interrupt\n");
+			printk("ni_mio_common: SC_TC interrupt\n");
 #endif
 			if (!devpriv->ai_continuous) {
 				shutdown_ai_command(dev);
@@ -1052,7 +1051,7 @@ static void handle_a_interrupt(struct comedi_device * dev, unsigned short status
 				break;
 		}
 	}
-#endif // !PCIDMA
+#endif /*  !PCIDMA */
 
 	if ((status & AI_STOP_St)) {
 		ni_handle_eos(dev, s);
@@ -1063,14 +1062,14 @@ static void handle_a_interrupt(struct comedi_device * dev, unsigned short status
 #ifdef DEBUG_INTERRUPT
 	status = devpriv->stc_readw(dev, AI_Status_1_Register);
 	if (status & Interrupt_A_St) {
-		rt_printk
+		printk
 			("handle_a_interrupt: didn't clear interrupt? status=0x%x\n",
 			status);
 	}
 #endif
 }
 
-static void ack_b_interrupt(struct comedi_device * dev, unsigned short b_status)
+static void ack_b_interrupt(struct comedi_device *dev, unsigned short b_status)
 {
 	unsigned short ack = 0;
 	if (b_status & AO_BC_TC_St) {
@@ -1098,13 +1097,13 @@ static void ack_b_interrupt(struct comedi_device * dev, unsigned short b_status)
 		devpriv->stc_writew(dev, ack, Interrupt_B_Ack_Register);
 }
 
-static void handle_b_interrupt(struct comedi_device * dev, unsigned short b_status,
+static void handle_b_interrupt(struct comedi_device *dev, unsigned short b_status,
 	unsigned ao_mite_status)
 {
 	struct comedi_subdevice *s = dev->subdevices + NI_AO_SUBDEV;
-	//unsigned short ack=0;
+	/* unsigned short ack=0; */
 #ifdef DEBUG_INTERRUPT
-	rt_printk("ni_mio_common: interrupt: b_status=%04x m1_status=%08x\n",
+	printk("ni_mio_common: interrupt: b_status=%04x m1_status=%08x\n",
 		b_status, ao_mite_status);
 	ni_mio_print_status_b(b_status);
 #endif
@@ -1118,10 +1117,10 @@ static void handle_b_interrupt(struct comedi_device * dev, unsigned short b_stat
 	if (ao_mite_status & ~(CHSR_INT | CHSR_LINKC | CHSR_DONE | CHSR_MRDY |
 			CHSR_DRDY | CHSR_DRQ1 | CHSR_DRQ0 | CHSR_ERROR |
 			CHSR_SABORT | CHSR_XFERR | CHSR_LxERR_mask)) {
-		rt_printk
+		printk
 			("unknown mite interrupt, ack! (ao_mite_status=%08x)\n",
 			ao_mite_status);
-		//mite_print_chsr(ao_mite_status);
+		/* mite_print_chsr(ao_mite_status); */
 		s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
 	}
 #endif
@@ -1129,7 +1128,7 @@ static void handle_b_interrupt(struct comedi_device * dev, unsigned short b_stat
 	if (b_status == 0xffff)
 		return;
 	if (b_status & AO_Overrun_St) {
-		rt_printk
+		printk
 			("ni_mio_common: AO FIFO underrun status=0x%04x status2=0x%04x\n",
 			b_status, devpriv->stc_readw(dev,
 				AO_Status_2_Register));
@@ -1146,7 +1145,7 @@ static void handle_b_interrupt(struct comedi_device * dev, unsigned short b_stat
 
 		ret = ni_ao_fifo_half_empty(dev, s);
 		if (!ret) {
-			rt_printk("ni_mio_common: AO buffer underrun\n");
+			printk("ni_mio_common: AO buffer underrun\n");
 			ni_set_bits(dev, Interrupt_B_Enable_Register,
 				AO_FIFO_Interrupt_Enable |
 				AO_Error_Interrupt_Enable, 0);
@@ -1170,13 +1169,13 @@ static void ni_mio_print_status_a(int status)
 {
 	int i;
 
-	rt_printk("A status:");
+	printk("A status:");
 	for (i = 15; i >= 0; i--) {
 		if (status & (1 << i)) {
-			rt_printk(" %s", status_a_strings[i]);
+			printk(" %s", status_a_strings[i]);
 		}
 	}
-	rt_printk("\n");
+	printk("\n");
 }
 #endif
 
@@ -1192,19 +1191,19 @@ static void ni_mio_print_status_b(int status)
 {
 	int i;
 
-	rt_printk("B status:");
+	printk("B status:");
 	for (i = 15; i >= 0; i--) {
 		if (status & (1 << i)) {
-			rt_printk(" %s", status_b_strings[i]);
+			printk(" %s", status_b_strings[i]);
 		}
 	}
-	rt_printk("\n");
+	printk("\n");
 }
 #endif
 
 #ifndef PCIDMA
 
-static void ni_ao_fifo_load(struct comedi_device * dev, struct comedi_subdevice * s, int n)
+static void ni_ao_fifo_load(struct comedi_device *dev, struct comedi_subdevice *s, int n)
 {
 	struct comedi_async *async = s->async;
 	struct comedi_cmd *cmd = &async->cmd;
@@ -1263,7 +1262,7 @@ static void ni_ao_fifo_load(struct comedi_device * dev, struct comedi_subdevice
  *  RT code, as RT code might purposely be running close to the
  *  metal.  Needs to be fixed eventually.
  */
-static int ni_ao_fifo_half_empty(struct comedi_device * dev, struct comedi_subdevice * s)
+static int ni_ao_fifo_half_empty(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	int n;
 
@@ -1284,7 +1283,7 @@ static int ni_ao_fifo_half_empty(struct comedi_device * dev, struct comedi_subde
 	return 1;
 }
 
-static int ni_ao_prep_fifo(struct comedi_device * dev, struct comedi_subdevice * s)
+static int ni_ao_prep_fifo(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	int n;
 
@@ -1307,7 +1306,7 @@ static int ni_ao_prep_fifo(struct comedi_device * dev, struct comedi_subdevice *
 	return n;
 }
 
-static void ni_ai_fifo_read(struct comedi_device * dev, struct comedi_subdevice * s, int n)
+static void ni_ai_fifo_read(struct comedi_device *dev, struct comedi_subdevice *s, int n)
 {
 	struct comedi_async *async = s->async;
 	int i;
@@ -1333,7 +1332,7 @@ static void ni_ai_fifo_read(struct comedi_device * dev, struct comedi_subdevice
 		short data[2];
 		u32 dl;
 
-		// This just reads the FIFO assuming the data is present, no checks on the FIFO status are performed
+		/*  This just reads the FIFO assuming the data is present, no checks on the FIFO status are performed */
 		for (i = 0; i < n / 2; i++) {
 			dl = ni_readl(AIFIFO_Data_6143);
 
@@ -1343,7 +1342,7 @@ static void ni_ai_fifo_read(struct comedi_device * dev, struct comedi_subdevice
 		}
 		if (n % 2) {
 			/* Assume there is a single sample stuck in the FIFO */
-			ni_writel(0x01, AIFIFO_Control_6143);	// Get stranded sample into FIFO
+			ni_writel(0x01, AIFIFO_Control_6143);	/*  Get stranded sample into FIFO */
 			dl = ni_readl(AIFIFO_Data_6143);
 			data[0] = (dl >> 16) & 0xffff;
 			cfc_write_to_buffer(s, data[0]);
@@ -1364,7 +1363,7 @@ static void ni_ai_fifo_read(struct comedi_device * dev, struct comedi_subdevice
 	}
 }
 
-static void ni_handle_fifo_half_full(struct comedi_device * dev)
+static void ni_handle_fifo_half_full(struct comedi_device *dev)
 {
 	int n;
 	struct comedi_subdevice *s = dev->subdevices + NI_AI_SUBDEV;
@@ -1376,14 +1375,14 @@ static void ni_handle_fifo_half_full(struct comedi_device * dev)
 #endif
 
 #ifdef PCIDMA
-static int ni_ai_drain_dma(struct comedi_device * dev)
+static int ni_ai_drain_dma(struct comedi_device *dev)
 {
 	int i;
 	static const int timeout = 10000;
 	unsigned long flags;
 	int retval = 0;
 
-	comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+	spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
 	if (devpriv->ai_mite_chan) {
 		for (i = 0; i < timeout; i++) {
 			if ((devpriv->stc_readw(dev,
@@ -1392,19 +1391,19 @@ static int ni_ai_drain_dma(struct comedi_device * dev)
 				&& mite_bytes_in_transit(devpriv->
 					ai_mite_chan) == 0)
 				break;
-			comedi_udelay(5);
+			udelay(5);
 		}
 		if (i == timeout) {
-			rt_printk
+			printk
 				("ni_mio_common: wait for dma drain timed out\n");
-			rt_printk
+			printk
 				("mite_bytes_in_transit=%i, AI_Status1_Register=0x%x\n",
 				mite_bytes_in_transit(devpriv->ai_mite_chan),
 				devpriv->stc_readw(dev, AI_Status_1_Register));
 			retval = -1;
 		}
 	}
-	comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+	spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
 
 	ni_sync_ai_dma(dev);
 
@@ -1414,7 +1413,7 @@ static int ni_ai_drain_dma(struct comedi_device * dev)
 /*
    Empties the AI fifo
 */
-static void ni_handle_fifo_dregs(struct comedi_device * dev)
+static void ni_handle_fifo_dregs(struct comedi_device *dev)
 {
 	struct comedi_subdevice *s = dev->subdevices + NI_AI_SUBDEV;
 	short data[2];
@@ -1444,9 +1443,9 @@ static void ni_handle_fifo_dregs(struct comedi_device * dev)
 			cfc_write_array_to_buffer(s, data, sizeof(data));
 			i += 2;
 		}
-		// Check if stranded sample is present
+		/*  Check if stranded sample is present */
 		if (ni_readl(AIFIFO_Status_6143) & 0x01) {
-			ni_writel(0x01, AIFIFO_Control_6143);	// Get stranded sample into FIFO
+			ni_writel(0x01, AIFIFO_Control_6143);	/*  Get stranded sample into FIFO */
 			dl = ni_readl(AIFIFO_Data_6143);
 			data[0] = (dl >> 16) & 0xffff;
 			cfc_write_to_buffer(s, data[0]);
@@ -1476,7 +1475,7 @@ static void ni_handle_fifo_dregs(struct comedi_device * dev)
 	}
 }
 
-static void get_last_sample_611x(struct comedi_device * dev)
+static void get_last_sample_611x(struct comedi_device *dev)
 {
 	struct comedi_subdevice *s = dev->subdevices + NI_AI_SUBDEV;
 	short data;
@@ -1493,7 +1492,7 @@ static void get_last_sample_611x(struct comedi_device * dev)
 	}
 }
 
-static void get_last_sample_6143(struct comedi_device * dev)
+static void get_last_sample_6143(struct comedi_device *dev)
 {
 	struct comedi_subdevice *s = dev->subdevices + NI_AI_SUBDEV;
 	short data;
@@ -1504,7 +1503,7 @@ static void get_last_sample_6143(struct comedi_device * dev)
 
 	/* Check if there's a single sample stuck in the FIFO */
 	if (ni_readl(AIFIFO_Status_6143) & 0x01) {
-		ni_writel(0x01, AIFIFO_Control_6143);	// Get stranded sample into FIFO
+		ni_writel(0x01, AIFIFO_Control_6143);	/*  Get stranded sample into FIFO */
 		dl = ni_readl(AIFIFO_Data_6143);
 
 		/* This may get the hi/lo data in the wrong order */
@@ -1513,7 +1512,7 @@ static void get_last_sample_6143(struct comedi_device * dev)
 	}
 }
 
-static void ni_ai_munge(struct comedi_device * dev, struct comedi_subdevice * s,
+static void ni_ai_munge(struct comedi_device *dev, struct comedi_subdevice *s,
 	void *data, unsigned int num_bytes, unsigned int chan_index)
 {
 	struct comedi_async *async = s->async;
@@ -1539,7 +1538,7 @@ static void ni_ai_munge(struct comedi_device * dev, struct comedi_subdevice * s,
 
 #ifdef PCIDMA
 
-static int ni_ai_setup_MITE_dma(struct comedi_device * dev)
+static int ni_ai_setup_MITE_dma(struct comedi_device *dev)
 {
 	struct comedi_subdevice *s = dev->subdevices + NI_AI_SUBDEV;
 	int retval;
@@ -1548,15 +1547,14 @@ static int ni_ai_setup_MITE_dma(struct comedi_device * dev)
 	retval = ni_request_ai_mite_channel(dev);
 	if (retval)
 		return retval;
-//      rt_printk("comedi_debug: using mite channel %i for ai.\n", devpriv->ai_mite_chan->channel);
+/* printk("comedi_debug: using mite channel %i for ai.\n", devpriv->ai_mite_chan->channel); */
 
 	/* write alloc the entire buffer */
 	comedi_buf_write_alloc(s->async, s->async->prealloc_bufsz);
 
-	comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
-	if(devpriv->ai_mite_chan == NULL)
-	{
-		comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+	spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+	if (devpriv->ai_mite_chan == NULL) {
+		spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
 		return -EIO;
 	}
 
@@ -1574,12 +1572,12 @@ static int ni_ai_setup_MITE_dma(struct comedi_device * dev)
 	};
 	/*start the MITE */
 	mite_dma_arm(devpriv->ai_mite_chan);
-	comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+	spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
 
 	return 0;
 }
 
-static int ni_ao_setup_MITE_dma(struct comedi_device * dev)
+static int ni_ao_setup_MITE_dma(struct comedi_device *dev)
 {
 	struct comedi_subdevice *s = dev->subdevices + NI_AO_SUBDEV;
 	int retval;
@@ -1592,7 +1590,7 @@ static int ni_ao_setup_MITE_dma(struct comedi_device * dev)
 	/* read alloc the entire buffer */
 	comedi_buf_read_alloc(s->async, s->async->prealloc_bufsz);
 
-	comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+	spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
 	if (devpriv->ao_mite_chan) {
 		if (boardtype.reg_type & (ni_reg_611x | ni_reg_6713)) {
 			mite_prep_dma(devpriv->ao_mite_chan, 32, 32);
@@ -1604,12 +1602,12 @@ static int ni_ao_setup_MITE_dma(struct comedi_device * dev)
 		mite_dma_arm(devpriv->ao_mite_chan);
 	} else
 		retval = -EIO;
-	comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+	spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
 
 	return retval;
 }
 
-#endif // PCIDMA
+#endif /*  PCIDMA */
 
 /*
    used for both cancel ioctl and board initialization
@@ -1617,7 +1615,7 @@ static int ni_ao_setup_MITE_dma(struct comedi_device * dev)
    this is pretty harsh for a cancel, but it works...
  */
 
-static int ni_ai_reset(struct comedi_device * dev, struct comedi_subdevice * s)
+static int ni_ai_reset(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	ni_release_ai_mite_channel(dev);
 	/* ai configuration */
@@ -1698,14 +1696,14 @@ static int ni_ai_reset(struct comedi_device * dev, struct comedi_subdevice * s)
 	return 0;
 }
 
-static int ni_ai_poll(struct comedi_device * dev, struct comedi_subdevice * s)
+static int ni_ai_poll(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	unsigned long flags = 0;
 	int count;
 
-	// lock to avoid race with interrupt handler
+	/*  lock to avoid race with interrupt handler */
 	if (in_interrupt() == 0)
-		comedi_spin_lock_irqsave(&dev->spinlock, flags);
+		spin_lock_irqsave(&dev->spinlock, flags);
 #ifndef PCIDMA
 	ni_handle_fifo_dregs(dev);
 #else
@@ -1713,13 +1711,13 @@ static int ni_ai_poll(struct comedi_device * dev, struct comedi_subdevice * s)
 #endif
 	count = s->async->buf_write_count - s->async->buf_read_count;
 	if (in_interrupt() == 0)
-		comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+		spin_unlock_irqrestore(&dev->spinlock, flags);
 
 	return count;
 }
 
-static int ni_ai_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_ai_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i, n;
 	const unsigned int mask = (1 << boardtype.adbits) - 1;
@@ -1736,7 +1734,7 @@ static int ni_ai_insn_read(struct comedi_device * dev, struct comedi_subdevice *
 		for (n = 0; n < num_adc_stages_611x; n++) {
 			devpriv->stc_writew(dev, AI_CONVERT_Pulse,
 				AI_Command_1_Register);
-			comedi_udelay(1);
+			udelay(1);
 		}
 		for (n = 0; n < insn->n; n++) {
 			devpriv->stc_writew(dev, AI_CONVERT_Pulse,
@@ -1758,7 +1756,7 @@ static int ni_ai_insn_read(struct comedi_device * dev, struct comedi_subdevice *
 				}
 			}
 			if (i == NI_TIMEOUT) {
-				rt_printk
+				printk
 					("ni_mio_common: timeout in 611x ni_ai_insn_read\n");
 				return -ETIME;
 			}
@@ -1774,13 +1772,13 @@ static int ni_ai_insn_read(struct comedi_device * dev, struct comedi_subdevice *
 			dl = 0;
 			for (i = 0; i < NI_TIMEOUT; i++) {
 				if (ni_readl(AIFIFO_Status_6143) & 0x01) {
-					ni_writel(0x01, AIFIFO_Control_6143);	// Get stranded sample into FIFO
+					ni_writel(0x01, AIFIFO_Control_6143);	/*  Get stranded sample into FIFO */
 					dl = ni_readl(AIFIFO_Data_6143);
 					break;
 				}
 			}
 			if (i == NI_TIMEOUT) {
-				rt_printk
+				printk
 					("ni_mio_common: timeout in 6143 ni_ai_insn_read\n");
 				return -ETIME;
 			}
@@ -1797,7 +1795,7 @@ static int ni_ai_insn_read(struct comedi_device * dev, struct comedi_subdevice *
 					break;
 			}
 			if (i == NI_TIMEOUT) {
-				rt_printk
+				printk
 					("ni_mio_common: timeout in ni_ai_insn_read\n");
 				return -ETIME;
 			}
@@ -1814,7 +1812,7 @@ static int ni_ai_insn_read(struct comedi_device * dev, struct comedi_subdevice *
 	return insn->n;
 }
 
-void ni_prime_channelgain_list(struct comedi_device * dev)
+void ni_prime_channelgain_list(struct comedi_device *dev)
 {
 	int i;
 	devpriv->stc_writew(dev, AI_CONVERT_Pulse, AI_Command_1_Register);
@@ -1825,12 +1823,12 @@ void ni_prime_channelgain_list(struct comedi_device * dev)
 			devpriv->stc_writew(dev, 1, ADC_FIFO_Clear);
 			return;
 		}
-		comedi_udelay(1);
+		udelay(1);
 	}
-	rt_printk("ni_mio_common: timeout loading channel/gain list\n");
+	printk("ni_mio_common: timeout loading channel/gain list\n");
 }
 
-static void ni_m_series_load_channelgain_list(struct comedi_device * dev,
+static void ni_m_series_load_channelgain_list(struct comedi_device *dev,
 	unsigned int n_chan, unsigned int *list)
 {
 	unsigned int chan, range, aref;
@@ -1841,7 +1839,7 @@ static void ni_m_series_load_channelgain_list(struct comedi_device * dev,
 
 	devpriv->stc_writew(dev, 1, Configuration_Memory_Clear);
 
-//      offset = 1 << (boardtype.adbits - 1);
+/* offset = 1 << (boardtype.adbits - 1); */
 	if ((list[0] & CR_ALT_SOURCE)) {
 		unsigned bypass_bits;
 		chan = CR_CHAN(list[0]);
@@ -1859,7 +1857,7 @@ static void ni_m_series_load_channelgain_list(struct comedi_device * dev,
 		bypass_bits |= MSeries_AI_Bypass_Gain_Bits(range_code);
 		if (dither)
 			bypass_bits |= MSeries_AI_Bypass_Dither_Bit;
-		// don't use 2's complement encoding
+		/*  don't use 2's complement encoding */
 		bypass_bits |= MSeries_AI_Bypass_Polarity_Bit;
 		ni_writel(bypass_bits, M_Offset_AI_Config_FIFO_Bypass);
 	} else {
@@ -1899,7 +1897,7 @@ static void ni_m_series_load_channelgain_list(struct comedi_device * dev,
 			config_bits |= MSeries_AI_Config_Last_Channel_Bit;
 		if (dither)
 			config_bits |= MSeries_AI_Config_Dither_Bit;
-		// don't use 2's complement encoding
+		/*  don't use 2's complement encoding */
 		config_bits |= MSeries_AI_Config_Polarity_Bit;
 		ni_writew(config_bits, M_Offset_AI_Config_FIFO_Data);
 	}
@@ -1935,7 +1933,7 @@ static void ni_m_series_load_channelgain_list(struct comedi_device * dev,
  *   bits 0-2: channel
  *       valid channels are 0-3
  */
-static void ni_load_channelgain_list(struct comedi_device * dev, unsigned int n_chan,
+static void ni_load_channelgain_list(struct comedi_device *dev, unsigned int n_chan,
 	unsigned int *list)
 {
 	unsigned int chan, range, aref;
@@ -1952,7 +1950,7 @@ static void ni_load_channelgain_list(struct comedi_device * dev, unsigned int n_
 		&& (boardtype.reg_type != ni_reg_6143)) {
 		if (devpriv->changain_state
 			&& devpriv->changain_spec == list[0]) {
-			// ready to go.
+			/*  ready to go. */
 			return;
 		}
 		devpriv->changain_state = 1;
@@ -1963,11 +1961,11 @@ static void ni_load_channelgain_list(struct comedi_device * dev, unsigned int n_
 
 	devpriv->stc_writew(dev, 1, Configuration_Memory_Clear);
 
-	// Set up Calibration mode if required
+	/*  Set up Calibration mode if required */
 	if (boardtype.reg_type == ni_reg_6143) {
 		if ((list[0] & CR_ALT_SOURCE)
 			&& !devpriv->ai_calib_source_enabled) {
-			// Strobe Relay enable bit
+			/*  Strobe Relay enable bit */
 			ni_writew(devpriv->
 				ai_calib_source |
 				Calibration_Channel_6143_RelayOn,
@@ -1975,10 +1973,10 @@ static void ni_load_channelgain_list(struct comedi_device * dev, unsigned int n_
 			ni_writew(devpriv->ai_calib_source,
 				Calibration_Channel_6143);
 			devpriv->ai_calib_source_enabled = 1;
-			msleep_interruptible(100);	// Allow relays to change
+			msleep_interruptible(100);	/*  Allow relays to change */
 		} else if (!(list[0] & CR_ALT_SOURCE)
 			&& devpriv->ai_calib_source_enabled) {
-			// Strobe Relay disable bit
+			/*  Strobe Relay disable bit */
 			ni_writew(devpriv->
 				ai_calib_source |
 				Calibration_Channel_6143_RelayOff,
@@ -1986,7 +1984,7 @@ static void ni_load_channelgain_list(struct comedi_device * dev, unsigned int n_
 			ni_writew(devpriv->ai_calib_source,
 				Calibration_Channel_6143);
 			devpriv->ai_calib_source_enabled = 0;
-			msleep_interruptible(100);	// Allow relays to change
+			msleep_interruptible(100);	/*  Allow relays to change */
 		}
 	}
 
@@ -2055,7 +2053,7 @@ static void ni_load_channelgain_list(struct comedi_device * dev, unsigned int n_
 	}
 }
 
-static int ni_ns_to_timer(const struct comedi_device * dev, unsigned nanosec,
+static int ni_ns_to_timer(const struct comedi_device *dev, unsigned nanosec,
 	int round_mode)
 {
 	int divider;
@@ -2074,29 +2072,29 @@ static int ni_ns_to_timer(const struct comedi_device * dev, unsigned nanosec,
 	return divider - 1;
 }
 
-static unsigned ni_timer_to_ns(const struct comedi_device * dev, int timer)
+static unsigned ni_timer_to_ns(const struct comedi_device *dev, int timer)
 {
 	return devpriv->clock_ns * (timer + 1);
 }
 
-static unsigned ni_min_ai_scan_period_ns(struct comedi_device * dev,
+static unsigned ni_min_ai_scan_period_ns(struct comedi_device *dev,
 	unsigned num_channels)
 {
 	switch (boardtype.reg_type) {
 	case ni_reg_611x:
 	case ni_reg_6143:
-		// simultaneously-sampled inputs
+		/*  simultaneously-sampled inputs */
 		return boardtype.ai_speed;
 		break;
 	default:
-		// multiplexed inputs
+		/*  multiplexed inputs */
 		break;
 	};
 	return boardtype.ai_speed * num_channels;
 }
 
-static int ni_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int ni_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	int tmp;
@@ -2308,7 +2306,7 @@ static int ni_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s
 	return 0;
 }
 
-static int ni_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int ni_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	const struct comedi_cmd *cmd = &s->async->cmd;
 	int timer;
@@ -2367,10 +2365,10 @@ static int ni_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 	if (cmd->chanlist_len == 1 || (boardtype.reg_type == ni_reg_611x)
 		|| (boardtype.reg_type == ni_reg_6143)) {
 		start_stop_select |= AI_STOP_Polarity;
-		start_stop_select |= AI_STOP_Select(31);	// logic low
+		start_stop_select |= AI_STOP_Select(31);	/*  logic low */
 		start_stop_select |= AI_STOP_Sync;
 	} else {
-		start_stop_select |= AI_STOP_Select(19);	// ai configuration memory
+		start_stop_select |= AI_STOP_Select(19);	/*  ai configuration memory */
 	}
 	devpriv->stc_writew(dev, start_stop_select,
 		AI_START_STOP_Select_Register);
@@ -2381,7 +2379,7 @@ static int ni_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 		stop_count = cmd->stop_arg - 1;
 
 		if (boardtype.reg_type == ni_reg_611x) {
-			// have to take 3 stage adc pipeline into account
+			/*  have to take 3 stage adc pipeline into account */
 			stop_count += num_adc_stages_611x;
 		}
 		/* stage number of scans */
@@ -2396,7 +2394,7 @@ static int ni_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 		if (stop_count == 0) {
 			devpriv->ai_cmd2 |= AI_End_On_End_Of_Scan;
 			interrupt_a_enable |= AI_STOP_Interrupt_Enable;
-			// this is required to get the last sample for chanlist_len > 1, not sure why
+			/*  this is required to get the last sample for chanlist_len > 1, not sure why */
 			if (cmd->chanlist_len > 1)
 				start_stop_select |=
 					AI_STOP_Polarity | AI_STOP_Edge;
@@ -2440,7 +2438,7 @@ static int ni_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 		mode2 |= AI_SI_Reload_Mode(0);
 		/* AI_SI_Initial_Load_Source=A */
 		mode2 &= ~AI_SI_Initial_Load_Source;
-		//mode2 |= AI_SC_Reload_Mode;
+		/* mode2 |= AI_SC_Reload_Mode; */
 		devpriv->stc_writew(dev, mode2, AI_Mode_2_Register);
 
 		/* load SI */
@@ -2486,8 +2484,8 @@ static int ni_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 		/* AI_SI2_Load */
 		devpriv->stc_writew(dev, AI_SI2_Load, AI_Command_1_Register);
 
-		mode2 |= AI_SI2_Reload_Mode;	// alternate
-		mode2 |= AI_SI2_Initial_Load_Source;	// B
+		mode2 |= AI_SI2_Reload_Mode;	/*  alternate */
+		mode2 |= AI_SI2_Initial_Load_Source;	/*  B */
 
 		devpriv->stc_writew(dev, mode2, AI_Mode_2_Register);
 		break;
@@ -2589,7 +2587,7 @@ static int ni_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 		if (retval)
 			return retval;
 	}
-	//mite_dump_regs(devpriv->mite);
+	/* mite_dump_regs(devpriv->mite); */
 #endif
 
 	switch (cmd->start_src) {
@@ -2612,7 +2610,7 @@ static int ni_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 	return 0;
 }
 
-static int ni_ai_inttrig(struct comedi_device * dev, struct comedi_subdevice * s,
+static int ni_ai_inttrig(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int trignum)
 {
 	if (trignum != 0)
@@ -2625,11 +2623,11 @@ static int ni_ai_inttrig(struct comedi_device * dev, struct comedi_subdevice * s
 	return 1;
 }
 
-static int ni_ai_config_analog_trig(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int ni_ai_config_analog_trig(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
-static int ni_ai_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_ai_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n < 1)
 		return -EINVAL;
@@ -2679,8 +2677,8 @@ static int ni_ai_insn_config(struct comedi_device * dev, struct comedi_subdevice
 	return -EINVAL;
 }
 
-static int ni_ai_config_analog_trig(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_ai_config_analog_trig(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int a, b, modebits;
 	int err = 0;
@@ -2777,7 +2775,7 @@ static int ni_ai_config_analog_trig(struct comedi_device * dev, struct comedi_su
 }
 
 /* munge data from unsigned to 2's complement for analog output bipolar modes */
-static void ni_ao_munge(struct comedi_device * dev, struct comedi_subdevice * s,
+static void ni_ao_munge(struct comedi_device *dev, struct comedi_subdevice *s,
 	void *data, unsigned int num_bytes, unsigned int chan_index)
 {
 	struct comedi_async *async = s->async;
@@ -2800,8 +2798,8 @@ static void ni_ao_munge(struct comedi_device * dev, struct comedi_subdevice * s,
 	}
 }
 
-static int ni_m_series_ao_config_chanlist(struct comedi_device * dev,
-	struct comedi_subdevice * s, unsigned int chanspec[], unsigned int n_chans,
+static int ni_m_series_ao_config_chanlist(struct comedi_device *dev,
+	struct comedi_subdevice *s, unsigned int chanspec[], unsigned int n_chans,
 	int timed)
 {
 	unsigned int range;
@@ -2810,7 +2808,7 @@ static int ni_m_series_ao_config_chanlist(struct comedi_device * dev,
 	int i;
 	int invert = 0;
 
-	if(timed) {
+	if (timed) {
 		for (i = 0; i < boardtype.n_aochan; ++i) {
 			devpriv->ao_conf[i] &= ~MSeries_AO_Update_Timed_Bit;
 			ni_writeb(devpriv->ao_conf[i], M_Offset_AO_Config_Bank(i));
@@ -2844,8 +2842,8 @@ static int ni_m_series_ao_config_chanlist(struct comedi_device * dev,
 				M_Offset_AO_Reference_Attenuation(chan));
 			break;
 		default:
-			rt_printk("%s: bug! unhandled ao reference voltage\n",
-				__FUNCTION__);
+			printk("%s: bug! unhandled ao reference voltage\n",
+				__func__);
 			break;
 		}
 		switch (krange->max + krange->min) {
@@ -2856,8 +2854,8 @@ static int ni_m_series_ao_config_chanlist(struct comedi_device * dev,
 			conf |= MSeries_AO_DAC_Offset_5V_Bits;
 			break;
 		default:
-			rt_printk("%s: bug! unhandled ao offset voltage\n",
-				__FUNCTION__);
+			printk("%s: bug! unhandled ao offset voltage\n",
+				__func__);
 			break;
 		}
 		if (timed)
@@ -2869,7 +2867,7 @@ static int ni_m_series_ao_config_chanlist(struct comedi_device * dev,
 	return invert;
 }
 
-static int ni_old_ao_config_chanlist(struct comedi_device * dev, struct comedi_subdevice * s,
+static int ni_old_ao_config_chanlist(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int chanspec[], unsigned int n_chans)
 {
 	unsigned int range;
@@ -2912,7 +2910,7 @@ static int ni_old_ao_config_chanlist(struct comedi_device * dev, struct comedi_s
 	return invert;
 }
 
-static int ni_ao_config_chanlist(struct comedi_device * dev, struct comedi_subdevice * s,
+static int ni_ao_config_chanlist(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int chanspec[], unsigned int n_chans, int timed)
 {
 	if (boardtype.reg_type & ni_reg_m_series_mask)
@@ -2921,16 +2919,16 @@ static int ni_ao_config_chanlist(struct comedi_device * dev, struct comedi_subde
 	else
 		return ni_old_ao_config_chanlist(dev, s, chanspec, n_chans);
 }
-static int ni_ao_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_ao_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	data[0] = devpriv->ao[CR_CHAN(insn->chanspec)];
 
 	return 1;
 }
 
-static int ni_ao_insn_write(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_ao_insn_write(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int chan = CR_CHAN(insn->chanspec);
 	unsigned int invert;
@@ -2948,8 +2946,8 @@ static int ni_ao_insn_write(struct comedi_device * dev, struct comedi_subdevice
 	return 1;
 }
 
-static int ni_ao_insn_write_671x(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_ao_insn_write_671x(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int chan = CR_CHAN(insn->chanspec);
 	unsigned int invert;
@@ -2965,16 +2963,16 @@ static int ni_ao_insn_write_671x(struct comedi_device * dev, struct comedi_subde
 	return 1;
 }
 
-static int ni_ao_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_ao_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	switch (data[0]) {
 	case INSN_CONFIG_GET_HARDWARE_BUFFER_SIZE:
-		switch(data[1])
+		switch (data[1])
 		{
 		case COMEDI_OUTPUT:
 			data[2] = 1 + boardtype.ao_fifo_depth * sizeof(short);
-			if(devpriv->mite) data[2] += devpriv->mite->fifo_size;
+			if (devpriv->mite) data[2] += devpriv->mite->fifo_size;
 			break;
 		case COMEDI_INPUT:
 			data[2] = 0;
@@ -2991,7 +2989,7 @@ static int ni_ao_insn_config(struct comedi_device * dev, struct comedi_subdevice
 	return -EINVAL;
 }
 
-static int ni_ao_inttrig(struct comedi_device * dev, struct comedi_subdevice * s,
+static int ni_ao_inttrig(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int trignum)
 {
 	int ret;
@@ -3033,7 +3031,7 @@ static int ni_ao_inttrig(struct comedi_device * dev, struct comedi_subdevice * s
 	devpriv->stc_writew(dev, devpriv->ao_mode3, AO_Mode_3_Register);
 	/* wait for DACs to be loaded */
 	for (i = 0; i < timeout; i++) {
-		comedi_udelay(1);
+		udelay(1);
 		if ((devpriv->stc_readw(dev,
 					Joint_Status_2_Register) &
 				AO_TMRDACWRs_In_Progress_St) == 0)
@@ -3044,7 +3042,7 @@ static int ni_ao_inttrig(struct comedi_device * dev, struct comedi_subdevice * s
 			"timed out waiting for AO_TMRDACWRs_In_Progress_St to clear");
 		return -EIO;
 	}
-	// stc manual says we are need to clear error interrupt after AO_TMRDACWRs_In_Progress_St clears
+	/*  stc manual says we are need to clear error interrupt after AO_TMRDACWRs_In_Progress_St clears */
 	devpriv->stc_writew(dev, AO_Error_Interrupt_Ack,
 		Interrupt_B_Ack_Register);
 
@@ -3062,7 +3060,7 @@ static int ni_ao_inttrig(struct comedi_device * dev, struct comedi_subdevice * s
 	return 0;
 }
 
-static int ni_ao_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int ni_ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	const struct comedi_cmd *cmd = &s->async->cmd;
 	int bits;
@@ -3114,9 +3112,9 @@ static int ni_ao_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 	case TRIG_EXT:
                 devpriv->ao_trigger_select = AO_START1_Select(CR_CHAN(cmd->start_arg)+1);
 		if (cmd->start_arg & CR_INVERT)
-			devpriv->ao_trigger_select |= AO_START1_Polarity;  // 0=active high, 1=active low. see daq-stc 3-24 (p186)
+			devpriv->ao_trigger_select |= AO_START1_Polarity;  /*  0=active high, 1=active low. see daq-stc 3-24 (p186) */
 		if (cmd->start_arg & CR_EDGE)
-			devpriv->ao_trigger_select |= AO_START1_Edge;      // 0=edge detection disabled, 1=enabled
+			devpriv->ao_trigger_select |= AO_START1_Edge;      /*  0=edge detection disabled, 1=enabled */
 		devpriv->stc_writew(dev, devpriv->ao_trigger_select, AO_Trigger_Select_Register);
 		break;
 	default:
@@ -3139,9 +3137,9 @@ static int ni_ao_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 	devpriv->stc_writew(dev, devpriv->ao_mode2, AO_Mode_2_Register);
 	switch (cmd->stop_src) {
 	case TRIG_COUNT:
-		if(boardtype.reg_type & ni_reg_m_series_mask)
+		if (boardtype.reg_type & ni_reg_m_series_mask)
 		{
-			// this is how the NI example code does it for m-series boards, verified correct with 6259
+			/*  this is how the NI example code does it for m-series boards, verified correct with 6259 */
 			devpriv->stc_writel(dev, cmd->stop_arg - 1, AO_UC_Load_A_Register);
 			devpriv->stc_writew(dev, AO_UC_Load, AO_Command_1_Register);
 		}else
@@ -3244,7 +3242,7 @@ static int ni_ao_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 		bits |= AO_Number_Of_DAC_Packages;
 #endif
 	devpriv->stc_writew(dev, bits, AO_Personal_Register);
-	// enable sending of ao dma requests
+	/*  enable sending of ao dma requests */
 	devpriv->stc_writew(dev, AO_AOFREQ_Enable, AO_Start_Select_Register);
 
 	devpriv->stc_writew(dev, AO_Configuration_End, Joint_Reset_Register);
@@ -3261,8 +3259,8 @@ static int ni_ao_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 	return 0;
 }
 
-static int ni_ao_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int ni_ao_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	int tmp;
@@ -3384,13 +3382,13 @@ static int ni_ao_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s
 	return 0;
 }
 
-static int ni_ao_reset(struct comedi_device * dev, struct comedi_subdevice * s)
+static int ni_ao_reset(struct comedi_device *dev, struct comedi_subdevice *s)
 {
-	//devpriv->ao0p=0x0000;
-	//ni_writew(devpriv->ao0p,AO_Configuration);
+	/* devpriv->ao0p=0x0000; */
+	/* ni_writew(devpriv->ao0p,AO_Configuration); */
 
-	//devpriv->ao1p=AO_Channel(1);
-	//ni_writew(devpriv->ao1p,AO_Configuration);
+	/* devpriv->ao1p=AO_Channel(1); */
+	/* ni_writew(devpriv->ao1p,AO_Configuration); */
 
 	ni_release_ao_mite_channel(dev);
 
@@ -3422,7 +3420,7 @@ static int ni_ao_reset(struct comedi_device * dev, struct comedi_subdevice * s)
 	if (boardtype.reg_type & ni_reg_6xxx_mask) {
 		unsigned immediate_bits = 0;
 		unsigned i;
-		for(i = 0; i < s->n_chan; ++i)
+		for (i = 0; i < s->n_chan; ++i)
 		{
 			immediate_bits |= 1 << i;
 		}
@@ -3434,13 +3432,13 @@ static int ni_ao_reset(struct comedi_device * dev, struct comedi_subdevice * s)
 	return 0;
 }
 
-// digital io
+/* digital io */
 
-static int ni_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 #ifdef DEBUG_DIO
-	rt_printk("ni_dio_insn_config() chan=%d io=%d\n",
+	printk("ni_dio_insn_config() chan=%d io=%d\n",
 		CR_CHAN(insn->chanspec), data[0]);
 #endif
 	switch (data[0]) {
@@ -3468,11 +3466,11 @@ static int ni_dio_insn_config(struct comedi_device * dev, struct comedi_subdevic
 	return 1;
 }
 
-static int ni_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 #ifdef DEBUG_DIO
-	rt_printk("ni_dio_insn_bits() mask=0x%x bits=0x%x\n", data[0], data[1]);
+	printk("ni_dio_insn_bits() mask=0x%x bits=0x%x\n", data[0], data[1]);
 #endif
 	if (insn->n != 2)
 		return -EINVAL;
@@ -3495,11 +3493,11 @@ static int ni_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice
 	return 2;
 }
 
-static int ni_m_series_dio_insn_config(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+static int ni_m_series_dio_insn_config(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 #ifdef DEBUG_DIO
-	rt_printk("ni_m_series_dio_insn_config() chan=%d io=%d\n",
+	printk("ni_m_series_dio_insn_config() chan=%d io=%d\n",
 		CR_CHAN(insn->chanspec), data[0]);
 #endif
 	switch (data[0]) {
@@ -3525,11 +3523,11 @@ static int ni_m_series_dio_insn_config(struct comedi_device * dev,
 	return 1;
 }
 
-static int ni_m_series_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_m_series_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 #ifdef DEBUG_DIO
-	rt_printk("ni_m_series_dio_insn_bits() mask=0x%x bits=0x%x\n", data[0],
+	printk("ni_m_series_dio_insn_bits() mask=0x%x bits=0x%x\n", data[0],
 		data[1]);
 #endif
 	if (insn->n != 2)
@@ -3544,8 +3542,8 @@ static int ni_m_series_dio_insn_bits(struct comedi_device * dev, struct comedi_s
 	return 2;
 }
 
-static int ni_cdio_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int ni_cdio_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	int tmp;
@@ -3653,7 +3651,7 @@ static int ni_cdio_cmdtest(struct comedi_device * dev, struct comedi_subdevice *
 	return 0;
 }
 
-static int ni_cdio_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int ni_cdio_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	const struct comedi_cmd *cmd = &s->async->cmd;
 	unsigned cdo_mode_bits = CDO_FIFO_Mode_Bit | CDO_Halt_On_Error_Bit;
@@ -3690,7 +3688,7 @@ static int ni_cdio_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 	return 0;
 }
 
-static int ni_cdo_inttrig(struct comedi_device * dev, struct comedi_subdevice * s,
+static int ni_cdo_inttrig(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int trignum)
 {
 #ifdef PCIDMA
@@ -3706,7 +3704,7 @@ static int ni_cdo_inttrig(struct comedi_device * dev, struct comedi_subdevice *
 	comedi_buf_read_alloc(s->async, s->async->prealloc_bufsz);
 
 #ifdef PCIDMA
-	comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+	spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
 	if (devpriv->cdo_mite_chan) {
 		mite_prep_dma(devpriv->cdo_mite_chan, 32, 32);
 		mite_dma_arm(devpriv->cdo_mite_chan);
@@ -3714,17 +3712,19 @@ static int ni_cdo_inttrig(struct comedi_device * dev, struct comedi_subdevice *
 		comedi_error(dev, "BUG: no cdo mite channel?");
 		retval = -EIO;
 	}
-	comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+	spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
 	if (retval < 0)
 		return retval;
 #endif
-// XXX not sure what interrupt C group does
-//      ni_writeb(Interrupt_Group_C_Enable_Bit, M_Offset_Interrupt_C_Enable);
-	//wait for dma to fill output fifo
+/*
+* XXX not sure what interrupt C group does
+* ni_writeb(Interrupt_Group_C_Enable_Bit,
+* M_Offset_Interrupt_C_Enable); wait for dma to fill output fifo
+*/
 	for (i = 0; i < timeout; ++i) {
 		if (ni_readl(M_Offset_CDIO_Status) & CDO_FIFO_Full_Bit)
 			break;
-		comedi_udelay(10);
+		udelay(10);
 	}
 	if (i == timeout) {
 		comedi_error(dev, "dma failed to fill cdo fifo!");
@@ -3736,20 +3736,22 @@ static int ni_cdo_inttrig(struct comedi_device * dev, struct comedi_subdevice *
 	return retval;
 }
 
-static int ni_cdio_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int ni_cdio_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	ni_writel(CDO_Disarm_Bit | CDO_Error_Interrupt_Enable_Clear_Bit |
 		CDO_Empty_FIFO_Interrupt_Enable_Clear_Bit |
 		CDO_FIFO_Request_Interrupt_Enable_Clear_Bit,
 		M_Offset_CDIO_Command);
-// XXX not sure what interrupt C group does
-//      ni_writeb(0, M_Offset_Interrupt_C_Enable);
+/*
+* XXX not sure what interrupt C group does ni_writeb(0,
+* M_Offset_Interrupt_C_Enable);
+*/
 	ni_writel(0, M_Offset_CDO_Mask_Enable);
 	ni_release_cdo_mite_channel(dev);
 	return 0;
 }
 
-static void handle_cdio_interrupt(struct comedi_device * dev)
+static void handle_cdio_interrupt(struct comedi_device *dev)
 {
 	unsigned cdio_status;
 	struct comedi_subdevice *s = dev->subdevices + NI_DIO_SUBDEV;
@@ -3761,7 +3763,7 @@ static void handle_cdio_interrupt(struct comedi_device * dev)
 		return;
 	}
 #ifdef PCIDMA
-	comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+	spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
 	if (devpriv->cdo_mite_chan) {
 		unsigned cdo_mite_status =
 			mite_get_status(devpriv->cdo_mite_chan);
@@ -3772,26 +3774,26 @@ static void handle_cdio_interrupt(struct comedi_device * dev)
 		}
 		mite_sync_output_dma(devpriv->cdo_mite_chan, s->async);
 	}
-	comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+	spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
 #endif
 
 	cdio_status = ni_readl(M_Offset_CDIO_Status);
 	if (cdio_status & (CDO_Overrun_Bit | CDO_Underflow_Bit)) {
-//              rt_printk("cdio error: statux=0x%x\n", cdio_status);
-		ni_writel(CDO_Error_Interrupt_Confirm_Bit, M_Offset_CDIO_Command);	// XXX just guessing this is needed and does something useful
+/* printk("cdio error: statux=0x%x\n", cdio_status); */
+		ni_writel(CDO_Error_Interrupt_Confirm_Bit, M_Offset_CDIO_Command);	/*  XXX just guessing this is needed and does something useful */
 		s->async->events |= COMEDI_CB_OVERFLOW;
 	}
 	if (cdio_status & CDO_FIFO_Empty_Bit) {
-//              rt_printk("cdio fifo empty\n");
+/* printk("cdio fifo empty\n"); */
 		ni_writel(CDO_Empty_FIFO_Interrupt_Enable_Clear_Bit,
 			M_Offset_CDIO_Command);
-//              s->async->events |= COMEDI_CB_EOA;
+/* s->async->events |= COMEDI_CB_EOA; */
 	}
 	ni_event(dev, s);
 }
 
-static int ni_serial_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_serial_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int err = insn->n;
 	unsigned char byte_out, byte_in = 0;
@@ -3803,7 +3805,7 @@ static int ni_serial_insn_config(struct comedi_device * dev, struct comedi_subde
 	case INSN_CONFIG_SERIAL_CLOCK:
 
 #ifdef DEBUG_DIO
-		rt_printk("SPI serial clock Config cd\n", data[1]);
+		printk("SPI serial clock Config cd\n", data[1]);
 #endif
 		devpriv->serial_hw_mode = 1;
 		devpriv->dio_control |= DIO_HW_Serial_Enable;
@@ -3869,7 +3871,7 @@ static int ni_serial_insn_config(struct comedi_device * dev, struct comedi_subde
 			err = ni_serial_sw_readwrite8(dev, s, byte_out,
 				&byte_in);
 		} else {
-			rt_printk("ni_serial_insn_config: serial disabled!\n");
+			printk("ni_serial_insn_config: serial disabled!\n");
 			return -EINVAL;
 		}
 		if (err < 0)
@@ -3884,14 +3886,14 @@ static int ni_serial_insn_config(struct comedi_device * dev, struct comedi_subde
 
 }
 
-static int ni_serial_hw_readwrite8(struct comedi_device * dev, struct comedi_subdevice * s,
+static int ni_serial_hw_readwrite8(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned char data_out, unsigned char *data_in)
 {
 	unsigned int status1;
 	int err = 0, count = 20;
 
 #ifdef DEBUG_DIO
-	rt_printk("ni_serial_hw_readwrite8: outputting 0x%x\n", data_out);
+	printk("ni_serial_hw_readwrite8: outputting 0x%x\n", data_out);
 #endif
 
 	devpriv->dio_output &= ~DIO_Serial_Data_Mask;
@@ -3914,9 +3916,9 @@ static int ni_serial_hw_readwrite8(struct comedi_device * dev, struct comedi_sub
 				Joint_Status_1_Register)) &
 		DIO_Serial_IO_In_Progress_St) {
 		/* Delay one bit per loop */
-		comedi_udelay((devpriv->serial_interval_ns + 999) / 1000);
+		udelay((devpriv->serial_interval_ns + 999) / 1000);
 		if (--count < 0) {
-			rt_printk
+			printk
 				("ni_serial_hw_readwrite8: SPI serial I/O didn't finish in time!\n");
 			err = -ETIME;
 			goto Error;
@@ -3925,12 +3927,12 @@ static int ni_serial_hw_readwrite8(struct comedi_device * dev, struct comedi_sub
 
 	/* Delay for last bit. This delay is absolutely necessary, because
 	   DIO_Serial_IO_In_Progress_St goes high one bit too early. */
-	comedi_udelay((devpriv->serial_interval_ns + 999) / 1000);
+	udelay((devpriv->serial_interval_ns + 999) / 1000);
 
 	if (data_in != NULL) {
 		*data_in = devpriv->stc_readw(dev, DIO_Serial_Input_Register);
 #ifdef DEBUG_DIO
-		rt_printk("ni_serial_hw_readwrite8: inputted 0x%x\n", *data_in);
+		printk("ni_serial_hw_readwrite8: inputted 0x%x\n", *data_in);
 #endif
 	}
 
@@ -3940,17 +3942,17 @@ static int ni_serial_hw_readwrite8(struct comedi_device * dev, struct comedi_sub
 	return err;
 }
 
-static int ni_serial_sw_readwrite8(struct comedi_device * dev, struct comedi_subdevice * s,
+static int ni_serial_sw_readwrite8(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned char data_out, unsigned char *data_in)
 {
 	unsigned char mask, input = 0;
 
 #ifdef DEBUG_DIO
-	rt_printk("ni_serial_sw_readwrite8: outputting 0x%x\n", data_out);
+	printk("ni_serial_sw_readwrite8: outputting 0x%x\n", data_out);
 #endif
 
 	/* Wait for one bit before transfer */
-	comedi_udelay((devpriv->serial_interval_ns + 999) / 1000);
+	udelay((devpriv->serial_interval_ns + 999) / 1000);
 
 	for (mask = 0x80; mask; mask >>= 1) {
 		/* Output current bit; note that we cannot touch s->state
@@ -3969,23 +3971,23 @@ static int ni_serial_sw_readwrite8(struct comedi_device * dev, struct comedi_sub
 		devpriv->stc_writew(dev, devpriv->dio_control,
 			DIO_Control_Register);
 
-		comedi_udelay((devpriv->serial_interval_ns + 999) / 2000);
+		udelay((devpriv->serial_interval_ns + 999) / 2000);
 
 		devpriv->dio_control &= ~DIO_Software_Serial_Control;
 		devpriv->stc_writew(dev, devpriv->dio_control,
 			DIO_Control_Register);
 
-		comedi_udelay((devpriv->serial_interval_ns + 999) / 2000);
+		udelay((devpriv->serial_interval_ns + 999) / 2000);
 
 		/* Input current bit */
 		if (devpriv->stc_readw(dev,
 				DIO_Parallel_Input_Register) & DIO_SDIN) {
-/*			rt_printk("DIO_P_I_R: 0x%x\n", devpriv->stc_readw(dev, DIO_Parallel_Input_Register)); */
+/*			printk("DIO_P_I_R: 0x%x\n", devpriv->stc_readw(dev, DIO_Parallel_Input_Register)); */
 			input |= mask;
 		}
 	}
 #ifdef DEBUG_DIO
-	rt_printk("ni_serial_sw_readwrite8: inputted 0x%x\n", input);
+	printk("ni_serial_sw_readwrite8: inputted 0x%x\n", input);
 #endif
 	if (data_in)
 		*data_in = input;
@@ -3993,7 +3995,7 @@ static int ni_serial_sw_readwrite8(struct comedi_device * dev, struct comedi_sub
 	return 0;
 }
 
-static void mio_common_detach(struct comedi_device * dev)
+static void mio_common_detach(struct comedi_device *dev)
 {
 	if (dev->private) {
 		if (devpriv->counter_dev) {
@@ -4004,7 +4006,7 @@ static void mio_common_detach(struct comedi_device * dev)
 		subdev_8255_cleanup(dev, dev->subdevices + NI_8255_DIO_SUBDEV);
 }
 
-static void init_ao_67xx(struct comedi_device * dev, struct comedi_subdevice * s)
+static void init_ao_67xx(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	int i;
 
@@ -4099,8 +4101,8 @@ static unsigned ni_gpct_to_stc_register(enum ni_gpct_register reg)
 		stc_register = Interrupt_B_Enable_Register;
 		break;
 	default:
-		rt_printk("%s: unhandled register 0x%x in switch.\n",
-			__FUNCTION__, reg);
+		printk("%s: unhandled register 0x%x in switch.\n",
+			__func__, reg);
 		BUG();
 		return 0;
 		break;
@@ -4208,15 +4210,15 @@ static unsigned ni_gpct_read_register(struct ni_gpct *counter,
 	return 0;
 }
 
-static int ni_freq_out_insn_read(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+static int ni_freq_out_insn_read(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 	data[0] = devpriv->clock_and_fout & FOUT_Divider_mask;
 	return 1;
 }
 
-static int ni_freq_out_insn_write(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+static int ni_freq_out_insn_write(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 	devpriv->clock_and_fout &= ~FOUT_Enable;
 	devpriv->stc_writew(dev, devpriv->clock_and_fout,
@@ -4229,7 +4231,7 @@ static int ni_freq_out_insn_write(struct comedi_device * dev,
 	return insn->n;
 }
 
-static int ni_set_freq_out_clock(struct comedi_device * dev, unsigned int clock_source)
+static int ni_set_freq_out_clock(struct comedi_device *dev, unsigned int clock_source)
 {
 	switch (clock_source) {
 	case NI_FREQ_OUT_TIMEBASE_1_DIV_2_CLOCK_SRC:
@@ -4246,8 +4248,8 @@ static int ni_set_freq_out_clock(struct comedi_device * dev, unsigned int clock_
 	return 3;
 }
 
-static void ni_get_freq_out_clock(struct comedi_device * dev, unsigned int * clock_source,
-	unsigned int * clock_period_ns)
+static void ni_get_freq_out_clock(struct comedi_device *dev, unsigned int *clock_source,
+	unsigned int *clock_period_ns)
 {
 	if (devpriv->clock_and_fout & FOUT_Timebase_Select) {
 		*clock_source = NI_FREQ_OUT_TIMEBASE_2_CLOCK_SRC;
@@ -4258,8 +4260,8 @@ static void ni_get_freq_out_clock(struct comedi_device * dev, unsigned int * clo
 	}
 }
 
-static int ni_freq_out_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_freq_out_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	switch (data[0]) {
 	case INSN_CONFIG_SET_CLOCK_SRC:
@@ -4274,11 +4276,11 @@ static int ni_freq_out_insn_config(struct comedi_device * dev, struct comedi_sub
 	return -EINVAL;
 }
 
-static int ni_alloc_private(struct comedi_device * dev)
+static int ni_alloc_private(struct comedi_device *dev)
 {
 	int ret;
 
-	ret = alloc_private(dev, sizeof(ni_private));
+	ret = alloc_private(dev, sizeof(struct ni_private));
 	if (ret < 0)
 		return ret;
 
@@ -4289,7 +4291,7 @@ static int ni_alloc_private(struct comedi_device * dev)
 	return 0;
 };
 
-static int ni_E_init(struct comedi_device * dev, struct comedi_devconfig * it)
+static int ni_E_init(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	unsigned j;
@@ -4419,14 +4421,14 @@ static int ni_E_init(struct comedi_device * dev, struct comedi_devconfig * it)
 	s = dev->subdevices + NI_CALIBRATION_SUBDEV;
 	s->type = COMEDI_SUBD_CALIB;
 	if (boardtype.reg_type & ni_reg_m_series_mask) {
-		// internal PWM analog output used for AI nonlinearity calibration
+		/*  internal PWM analog output used for AI nonlinearity calibration */
 		s->subdev_flags = SDF_INTERNAL;
 		s->insn_config = &ni_m_series_pwm_config;
 		s->n_chan = 1;
 		s->maxdata = 0;
 		ni_writel(0x0, M_Offset_Cal_PWM);
 	} else if (boardtype.reg_type == ni_reg_6143) {
-		// internal PWM analog output used for AI nonlinearity calibration
+		/*  internal PWM analog output used for AI nonlinearity calibration */
 		s->subdev_flags = SDF_INTERNAL;
 		s->insn_config = &ni_6143_pwm_config;
 		s->n_chan = 1;
@@ -4478,7 +4480,7 @@ static int ni_E_init(struct comedi_device * dev, struct comedi_devconfig * it)
 	if (boardtype.reg_type & ni_reg_67xx_mask) {
 		s->type = COMEDI_SUBD_AI;
 		s->subdev_flags = SDF_READABLE | SDF_DIFF | SDF_INTERNAL;
-		// one channel for each analog output channel
+		/*  one channel for each analog output channel */
 		s->n_chan = boardtype.n_aochan;
 		s->maxdata = (1 << 16) - 1;
 		s->range_table = &range_unknown;	/* XXX */
@@ -4557,7 +4559,7 @@ static int ni_E_init(struct comedi_device * dev, struct comedi_devconfig * it)
 	/* ai configuration */
 	ni_ai_reset(dev, dev->subdevices + NI_AI_SUBDEV);
 	if ((boardtype.reg_type & ni_reg_6xxx_mask) == 0) {
-		// BEAM is this needed for PCI-6143 ??
+		/*  BEAM is this needed for PCI-6143 ?? */
 		devpriv->clock_and_fout =
 			Slow_Internal_Time_Divide_By_2 |
 			Slow_Internal_Timebase |
@@ -4623,8 +4625,8 @@ static int ni_8255_callback(int dir, int port, int data, unsigned long arg)
 	presents the EEPROM as a subdevice
 */
 
-static int ni_eeprom_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_eeprom_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	data[0] = ni_read_eeprom(dev, CR_CHAN(insn->chanspec));
 
@@ -4635,7 +4637,7 @@ static int ni_eeprom_insn_read(struct comedi_device * dev, struct comedi_subdevi
 	reads bytes out of eeprom
 */
 
-static int ni_read_eeprom(struct comedi_device * dev, int addr)
+static int ni_read_eeprom(struct comedi_device *dev, int addr)
 {
 	int bit;
 	int bitstring;
@@ -4659,23 +4661,23 @@ static int ni_read_eeprom(struct comedi_device * dev, int addr)
 	return bitstring;
 }
 
-static int ni_m_series_eeprom_insn_read(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+static int ni_m_series_eeprom_insn_read(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 	data[0] = devpriv->eeprom_buffer[CR_CHAN(insn->chanspec)];
 
 	return 1;
 }
 
-static int ni_get_pwm_config(struct comedi_device * dev, unsigned int * data)
+static int ni_get_pwm_config(struct comedi_device *dev, unsigned int *data)
 {
 	data[1] = devpriv->pwm_up_count * devpriv->clock_ns;
 	data[2] = devpriv->pwm_down_count * devpriv->clock_ns;
 	return 3;
 }
 
-static int ni_m_series_pwm_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_m_series_pwm_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned up_count, down_count;
 	switch (data[0]) {
@@ -4739,8 +4741,8 @@ static int ni_m_series_pwm_config(struct comedi_device * dev, struct comedi_subd
 	return 0;
 }
 
-static int ni_6143_pwm_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_6143_pwm_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned up_count, down_count;
 	switch (data[0]) {
@@ -4802,20 +4804,20 @@ static int ni_6143_pwm_config(struct comedi_device * dev, struct comedi_subdevic
 	return 0;
 }
 
-static void ni_write_caldac(struct comedi_device * dev, int addr, int val);
+static void ni_write_caldac(struct comedi_device *dev, int addr, int val);
 /*
 	calibration subdevice
 */
-static int ni_calib_insn_write(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_calib_insn_write(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	ni_write_caldac(dev, CR_CHAN(insn->chanspec), data[0]);
 
 	return 1;
 }
 
-static int ni_calib_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_calib_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	data[0] = devpriv->caldacs[CR_CHAN(insn->chanspec)];
 
@@ -4845,7 +4847,7 @@ static struct caldac_struct caldacs[] = {
 	[ad8804_debug] = {16, 8, pack_ad8804},
 };
 
-static void caldac_setup(struct comedi_device * dev, struct comedi_subdevice * s)
+static void caldac_setup(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	int i, j;
 	int n_dacs;
@@ -4898,13 +4900,13 @@ static void caldac_setup(struct comedi_device * dev, struct comedi_subdevice * s
 	}
 }
 
-static void ni_write_caldac(struct comedi_device * dev, int addr, int val)
+static void ni_write_caldac(struct comedi_device *dev, int addr, int val)
 {
 	unsigned int loadbit = 0, bits = 0, bit, bitstring = 0;
 	int i;
 	int type;
 
-	//printk("ni_write_caldac: chan=%d val=%d\n",addr,val);
+	/* printk("ni_write_caldac: chan=%d val=%d\n",addr,val); */
 	if (devpriv->caldacs[addr] == val)
 		return;
 	devpriv->caldacs[addr] = val;
@@ -4916,7 +4918,7 @@ static void ni_write_caldac(struct comedi_device * dev, int addr, int val)
 		if (addr < caldacs[type].n_chans) {
 			bits = caldacs[type].packbits(addr, val, &bitstring);
 			loadbit = SerDacLd(i);
-			//printk("caldac: using i=%d addr=%d %x\n",i,addr,bitstring);
+			/* printk("caldac: using i=%d addr=%d %x\n",i,addr,bitstring); */
 			break;
 		}
 		addr -= caldacs[type].n_chans;
@@ -4924,12 +4926,12 @@ static void ni_write_caldac(struct comedi_device * dev, int addr, int val)
 
 	for (bit = 1 << (bits - 1); bit; bit >>= 1) {
 		ni_writeb(((bit & bitstring) ? 0x02 : 0), Serial_Command);
-		comedi_udelay(1);
+		udelay(1);
 		ni_writeb(1 | ((bit & bitstring) ? 0x02 : 0), Serial_Command);
-		comedi_udelay(1);
+		udelay(1);
 	}
 	ni_writeb(loadbit, Serial_Command);
-	comedi_udelay(1);
+	udelay(1);
 	ni_writeb(0, Serial_Command);
 }
 
@@ -4985,7 +4987,7 @@ static int pack_ad8842(int addr, int val, int *bitstring)
 /*
  *	Read the GPCTs current value.
  */
-static int GPCT_G_Watch(struct comedi_device * dev, int chan)
+static int GPCT_G_Watch(struct comedi_device *dev, int chan)
 {
 	unsigned int hi1, hi2, lo;
 
@@ -5008,11 +5010,11 @@ static int GPCT_G_Watch(struct comedi_device * dev, int chan)
 	return (hi1 << 16) | lo;
 }
 
-static void GPCT_Reset(struct comedi_device * dev, int chan)
+static void GPCT_Reset(struct comedi_device *dev, int chan)
 {
 	int temp_ack_reg = 0;
 
-	//printk("GPCT_Reset...");
+	/* printk("GPCT_Reset..."); */
 	devpriv->gpct_cur_operation[chan] = GPCT_RESET;
 
 	switch (chan) {
@@ -5029,7 +5031,7 @@ static void GPCT_Reset(struct comedi_device * dev, int chan)
 		devpriv->stc_writew(dev, temp_ack_reg,
 			Interrupt_A_Ack_Register);
 
-		//problem...this interferes with the other ctr...
+		/* problem...this interferes with the other ctr... */
 		devpriv->an_trig_etc_reg |= GPFO_0_Output_Enable;
 		devpriv->stc_writew(dev, devpriv->an_trig_etc_reg,
 			Analog_Trigger_Etc_Register);
@@ -5065,38 +5067,38 @@ static void GPCT_Reset(struct comedi_device * dev, int chan)
 		G_Input_Select_Register(chan));
 	devpriv->stc_writew(dev, 0, G_Autoincrement_Register(chan));
 
-	//printk("exit GPCT_Reset\n");
+	/* printk("exit GPCT_Reset\n"); */
 }
 
 #endif
 
-static int ni_gpct_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_gpct_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	struct ni_gpct *counter = s->private;
 	return ni_tio_insn_config(counter, insn, data);
 }
 
-static int ni_gpct_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_gpct_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	struct ni_gpct *counter = s->private;
 	return ni_tio_rinsn(counter, insn, data);
 }
 
-static int ni_gpct_insn_write(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_gpct_insn_write(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	struct ni_gpct *counter = s->private;
 	return ni_tio_winsn(counter, insn, data);
 }
 
-static int ni_gpct_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int ni_gpct_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	int retval;
 #ifdef PCIDMA
 	struct ni_gpct *counter = s->private;
-//      const struct comedi_cmd *cmd = &s->async->cmd;
+/* const struct comedi_cmd *cmd = &s->async->cmd; */
 
 	retval = ni_request_gpct_mite_channel(dev, counter->counter_index,
 		COMEDI_INPUT);
@@ -5114,8 +5116,8 @@ static int ni_gpct_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 	return retval;
 }
 
-static int ni_gpct_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int ni_gpct_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 #ifdef PCIDMA
 	struct ni_gpct *counter = s->private;
@@ -5126,7 +5128,7 @@ static int ni_gpct_cmdtest(struct comedi_device * dev, struct comedi_subdevice *
 #endif
 }
 
-static int ni_gpct_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int ni_gpct_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 #ifdef PCIDMA
 	struct ni_gpct *counter = s->private;
@@ -5147,7 +5149,7 @@ static int ni_gpct_cancel(struct comedi_device * dev, struct comedi_subdevice *
  *
  */
 
-static int ni_m_series_set_pfi_routing(struct comedi_device * dev, unsigned chan,
+static int ni_m_series_set_pfi_routing(struct comedi_device *dev, unsigned chan,
 	unsigned source)
 {
 	unsigned pfi_reg_index;
@@ -5165,16 +5167,16 @@ static int ni_m_series_set_pfi_routing(struct comedi_device * dev, unsigned chan
 	return 2;
 }
 
-static int ni_old_set_pfi_routing(struct comedi_device * dev, unsigned chan,
+static int ni_old_set_pfi_routing(struct comedi_device *dev, unsigned chan,
 	unsigned source)
 {
-	// pre-m-series boards have fixed signals on pfi pins
+	/*  pre-m-series boards have fixed signals on pfi pins */
 	if (source != ni_old_get_pfi_routing(dev, chan))
 		return -EINVAL;
 	return 2;
 }
 
-static int ni_set_pfi_routing(struct comedi_device * dev, unsigned chan,
+static int ni_set_pfi_routing(struct comedi_device *dev, unsigned chan,
 	unsigned source)
 {
 	if (boardtype.reg_type & ni_reg_m_series_mask)
@@ -5183,16 +5185,16 @@ static int ni_set_pfi_routing(struct comedi_device * dev, unsigned chan,
 		return ni_old_set_pfi_routing(dev, chan, source);
 }
 
-static unsigned ni_m_series_get_pfi_routing(struct comedi_device * dev, unsigned chan)
+static unsigned ni_m_series_get_pfi_routing(struct comedi_device *dev, unsigned chan)
 {
 	const unsigned array_offset = chan / 3;
 	return MSeries_PFI_Output_Select_Source(chan,
 		devpriv->pfi_output_select_reg[array_offset]);
 }
 
-static unsigned ni_old_get_pfi_routing(struct comedi_device * dev, unsigned chan)
+static unsigned ni_old_get_pfi_routing(struct comedi_device *dev, unsigned chan)
 {
-	// pre-m-series boards have fixed signals on pfi pins
+	/*  pre-m-series boards have fixed signals on pfi pins */
 	switch (chan) {
 	case 0:
 		return NI_PFI_OUTPUT_AI_START1;
@@ -5225,13 +5227,13 @@ static unsigned ni_old_get_pfi_routing(struct comedi_device * dev, unsigned chan
 		return NI_PFI_OUTPUT_G_GATE0;
 		break;
 	default:
-		rt_printk("%s: bug, unhandled case in switch.\n", __FUNCTION__);
+		printk("%s: bug, unhandled case in switch.\n", __func__);
 		break;
 	}
 	return 0;
 }
 
-static unsigned ni_get_pfi_routing(struct comedi_device * dev, unsigned chan)
+static unsigned ni_get_pfi_routing(struct comedi_device *dev, unsigned chan)
 {
 	if (boardtype.reg_type & ni_reg_m_series_mask)
 		return ni_m_series_get_pfi_routing(dev, chan);
@@ -5239,7 +5241,7 @@ static unsigned ni_get_pfi_routing(struct comedi_device * dev, unsigned chan)
 		return ni_old_get_pfi_routing(dev, chan);
 }
 
-static int ni_config_filter(struct comedi_device * dev, unsigned pfi_channel,
+static int ni_config_filter(struct comedi_device *dev, unsigned pfi_channel,
 	enum ni_pfi_filter_select filter)
 {
 	unsigned bits;
@@ -5253,8 +5255,8 @@ static int ni_config_filter(struct comedi_device * dev, unsigned pfi_channel,
 	return 0;
 }
 
-static int ni_pfi_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_pfi_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if ((boardtype.reg_type & ni_reg_m_series_mask) == 0) {
 		return -ENOTSUPP;
@@ -5268,8 +5270,8 @@ static int ni_pfi_insn_bits(struct comedi_device * dev, struct comedi_subdevice
 	return 2;
 }
 
-static int ni_pfi_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_pfi_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int chan;
 
@@ -5312,16 +5314,16 @@ static int ni_pfi_insn_config(struct comedi_device * dev, struct comedi_subdevic
  *  NI RTSI Bus Functions
  *
  */
-static void ni_rtsi_init(struct comedi_device * dev)
+static void ni_rtsi_init(struct comedi_device *dev)
 {
-	// Initialises the RTSI bus signal switch to a default state
+	/*  Initialises the RTSI bus signal switch to a default state */
 
-	// Set clock mode to internal
+	/*  Set clock mode to internal */
 	devpriv->clock_and_fout2 = MSeries_RTSI_10MHz_Bit;
 	if (ni_set_master_clock(dev, NI_MIO_INTERNAL_CLOCK, 0) < 0) {
-		rt_printk("ni_set_master_clock failed, bug?");
+		printk("ni_set_master_clock failed, bug?");
 	}
-	// default internal lines routing to RTSI bus lines
+	/*  default internal lines routing to RTSI bus lines */
 	devpriv->rtsi_trig_a_output_reg =
 		RTSI_Trig_Output_Bits(0,
 		NI_RTSI_OUTPUT_ADR_START1) | RTSI_Trig_Output_Bits(1,
@@ -5341,12 +5343,14 @@ static void ni_rtsi_init(struct comedi_device * dev)
 	devpriv->stc_writew(dev, devpriv->rtsi_trig_b_output_reg,
 		RTSI_Trig_B_Output_Register);
 
-	// Sets the source and direction of the 4 on board lines
-//      devpriv->stc_writew(dev, 0x0000, RTSI_Board_Register);
+/*
+* Sets the source and direction of the 4 on board lines
+* devpriv->stc_writew(dev, 0x0000, RTSI_Board_Register);
+*/
 }
 
-static int ni_rtsi_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_rtsi_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -5389,8 +5393,8 @@ static int ni_mseries_get_pll_parameters(unsigned reference_period_ns,
 		}
 	}
 	if (best_period_picosec == 0) {
-		rt_printk("%s: bug, failed to find pll parameters\n",
-			__FUNCTION__);
+		printk("%s: bug, failed to find pll parameters\n",
+			__func__);
 		return -EIO;
 	}
 	*freq_divider = best_div;
@@ -5401,7 +5405,7 @@ static int ni_mseries_get_pll_parameters(unsigned reference_period_ns,
 	return 0;
 }
 
-static inline unsigned num_configurable_rtsi_channels(struct comedi_device * dev)
+static inline unsigned num_configurable_rtsi_channels(struct comedi_device *dev)
 {
 	if (boardtype.reg_type & ni_reg_m_series_mask)
 		return 8;
@@ -5409,7 +5413,7 @@ static inline unsigned num_configurable_rtsi_channels(struct comedi_device * dev
 		return 7;
 }
 
-static int ni_mseries_set_pll_master_clock(struct comedi_device * dev, unsigned source,
+static int ni_mseries_set_pll_master_clock(struct comedi_device *dev, unsigned source,
 	unsigned period_ns)
 {
 	static const unsigned min_period_ns = 50;
@@ -5422,11 +5426,11 @@ static int ni_mseries_set_pll_master_clock(struct comedi_device * dev, unsigned
 	int retval;
 	if (source == NI_MIO_PLL_PXI10_CLOCK)
 		period_ns = 100;
-	// these limits are somewhat arbitrary, but NI advertises 1 to 20MHz range so we'll use that
+	/*  these limits are somewhat arbitrary, but NI advertises 1 to 20MHz range so we'll use that */
 	if (period_ns < min_period_ns || period_ns > max_period_ns) {
-		rt_printk
+		printk
 			("%s: you must specify an input clock frequency between %i and %i nanosec "
-			"for the phased-lock loop.\n", __FUNCTION__,
+			"for the phased-lock loop.\n", __func__,
 			min_period_ns, max_period_ns);
 		return -EINVAL;
 	}
@@ -5484,8 +5488,10 @@ static int ni_mseries_set_pll_master_clock(struct comedi_device * dev, unsigned
 	pll_control_bits |=
 		MSeries_PLL_Divisor_Bits(freq_divider) |
 		MSeries_PLL_Multiplier_Bits(freq_multiplier);
-//      rt_printk("using divider=%i, multiplier=%i for PLL.  pll_control_bits = 0x%x\n", freq_divider, freq_multiplier, pll_control_bits);
-//      rt_printk("clock_ns=%d\n", devpriv->clock_ns);
+
+	/* printk("using divider=%i, multiplier=%i for PLL. pll_control_bits = 0x%x\n",
+	 * freq_divider, freq_multiplier, pll_control_bits); */
+	/* printk("clock_ns=%d\n", devpriv->clock_ns); */
 	ni_writew(pll_control_bits, M_Offset_PLL_Control);
 	devpriv->clock_source = source;
 	/* it seems to typically take a few hundred microseconds for PLL to lock */
@@ -5496,15 +5502,15 @@ static int ni_mseries_set_pll_master_clock(struct comedi_device * dev, unsigned
 		udelay(1);
 	}
 	if (i == timeout) {
-		rt_printk
+		printk
 			("%s: timed out waiting for PLL to lock to reference clock source %i with period %i ns.\n",
-			__FUNCTION__, source, period_ns);
+			__func__, source, period_ns);
 		return -ETIMEDOUT;
 	}
 	return 3;
 }
 
-static int ni_set_master_clock(struct comedi_device * dev, unsigned source,
+static int ni_set_master_clock(struct comedi_device *dev, unsigned source,
 	unsigned period_ns)
 {
 	if (source == NI_MIO_INTERNAL_CLOCK) {
@@ -5533,9 +5539,9 @@ static int ni_set_master_clock(struct comedi_device * dev, unsigned source,
 					devpriv->rtsi_trig_direction_reg,
 					RTSI_Trig_Direction_Register);
 				if (period_ns == 0) {
-					rt_printk
+					printk
 						("%s: we don't handle an unspecified clock period correctly yet, returning error.\n",
-						__FUNCTION__);
+						__func__);
 					return -EINVAL;
 				} else {
 					devpriv->clock_ns = period_ns;
@@ -5548,7 +5554,7 @@ static int ni_set_master_clock(struct comedi_device * dev, unsigned source,
 	return 3;
 }
 
-static int ni_valid_rtsi_output_source(struct comedi_device * dev, unsigned chan,
+static int ni_valid_rtsi_output_source(struct comedi_device *dev, unsigned chan,
 	unsigned source)
 {
 	if (chan >= num_configurable_rtsi_channels(dev)) {
@@ -5556,9 +5562,9 @@ static int ni_valid_rtsi_output_source(struct comedi_device * dev, unsigned chan
 			if (source == NI_RTSI_OUTPUT_RTSI_OSC)
 				return 1;
 			else {
-				rt_printk
+				printk
 					("%s: invalid source for channel=%i, channel %i is always the RTSI clock for pre-m-series boards.\n",
-					__FUNCTION__, chan,
+					__func__, chan,
 					old_RTSI_clock_channel);
 				return 0;
 			}
@@ -5589,7 +5595,7 @@ static int ni_valid_rtsi_output_source(struct comedi_device * dev, unsigned chan
 	}
 }
 
-static int ni_set_rtsi_routing(struct comedi_device * dev, unsigned chan,
+static int ni_set_rtsi_routing(struct comedi_device *dev, unsigned chan,
 	unsigned source)
 {
 	if (ni_valid_rtsi_output_source(dev, chan, source) == 0)
@@ -5610,7 +5616,7 @@ static int ni_set_rtsi_routing(struct comedi_device * dev, unsigned chan,
 	return 2;
 }
 
-static unsigned ni_get_rtsi_routing(struct comedi_device * dev, unsigned chan)
+static unsigned ni_get_rtsi_routing(struct comedi_device *dev, unsigned chan)
 {
 	if (chan < 4) {
 		return RTSI_Trig_Output_Source(chan,
@@ -5621,13 +5627,13 @@ static unsigned ni_get_rtsi_routing(struct comedi_device * dev, unsigned chan)
 	} else {
 		if (chan == old_RTSI_clock_channel)
 			return NI_RTSI_OUTPUT_RTSI_OSC;
-		rt_printk("%s: bug! should never get here?\n", __FUNCTION__);
+		printk("%s: bug! should never get here?\n", __func__);
 		return 0;
 	}
 }
 
-static int ni_rtsi_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ni_rtsi_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int chan = CR_CHAN(insn->chanspec);
 	switch (data[0]) {
@@ -5698,7 +5704,7 @@ static int ni_rtsi_insn_config(struct comedi_device * dev, struct comedi_subdevi
 	return 1;
 }
 
-static int cs5529_wait_for_idle(struct comedi_device * dev)
+static int cs5529_wait_for_idle(struct comedi_device *dev)
 {
 	unsigned short status;
 	const int timeout = HZ;
@@ -5714,15 +5720,15 @@ static int cs5529_wait_for_idle(struct comedi_device * dev)
 			return -EIO;
 		}
 	}
-//printk("looped %i times waiting for idle\n", i);
+/* printk("looped %i times waiting for idle\n", i); */
 	if (i == timeout) {
-		rt_printk("%s: %s: timeout\n", __FILE__, __FUNCTION__);
+		printk("%s: %s: timeout\n", __FILE__, __func__);
 		return -ETIME;
 	}
 	return 0;
 }
 
-static void cs5529_command(struct comedi_device * dev, unsigned short value)
+static void cs5529_command(struct comedi_device *dev, unsigned short value)
 {
 	static const int timeout = 100;
 	int i;
@@ -5735,16 +5741,16 @@ static void cs5529_command(struct comedi_device * dev, unsigned short value)
 	for (i = 0; i < timeout; i++) {
 		if ((ni_ao_win_inw(dev, CAL_ADC_Status_67xx) & CSS_ADC_BUSY))
 			break;
-		comedi_udelay(1);
+		udelay(1);
 	}
-//printk("looped %i times writing command to cs5529\n", i);
+/* printk("looped %i times writing command to cs5529\n", i); */
 	if (i == timeout) {
 		comedi_error(dev, "possible problem - never saw adc go busy?");
 	}
 }
 
 /* write to cs5529 register */
-static void cs5529_config_write(struct comedi_device * dev, unsigned int value,
+static void cs5529_config_write(struct comedi_device *dev, unsigned int value,
 	unsigned int reg_select_bits)
 {
 	ni_ao_win_outw(dev, ((value >> 16) & 0xff),
@@ -5759,7 +5765,7 @@ static void cs5529_config_write(struct comedi_device * dev, unsigned int value,
 
 #ifdef NI_CS5529_DEBUG
 /* read from cs5529 register */
-static unsigned int cs5529_config_read(struct comedi_device * dev,
+static unsigned int cs5529_config_read(struct comedi_device *dev,
 	unsigned int reg_select_bits)
 {
 	unsigned int value;
@@ -5775,7 +5781,7 @@ static unsigned int cs5529_config_read(struct comedi_device * dev,
 }
 #endif
 
-static int cs5529_do_conversion(struct comedi_device * dev, unsigned short *data)
+static int cs5529_do_conversion(struct comedi_device *dev, unsigned short *data)
 {
 	int retval;
 	unsigned short status;
@@ -5789,12 +5795,12 @@ static int cs5529_do_conversion(struct comedi_device * dev, unsigned short *data
 	}
 	status = ni_ao_win_inw(dev, CAL_ADC_Status_67xx);
 	if (status & CSS_OSC_DETECT) {
-		rt_printk
+		printk
 			("ni_mio_common: cs5529 conversion error, status CSS_OSC_DETECT\n");
 		return -EIO;
 	}
 	if (status & CSS_OVERRANGE) {
-		rt_printk
+		printk
 			("ni_mio_common: cs5529 conversion error, overrange (ignoring)\n");
 	}
 	if (data) {
@@ -5805,8 +5811,8 @@ static int cs5529_do_conversion(struct comedi_device * dev, unsigned short *data
 	return 0;
 }
 
-static int cs5529_ai_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int cs5529_ai_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n, retval;
 	unsigned short sample;
@@ -5831,7 +5837,7 @@ static int cs5529_ai_insn_read(struct comedi_device * dev, struct comedi_subdevi
 	return insn->n;
 }
 
-static int init_cs5529(struct comedi_device * dev)
+static int init_cs5529(struct comedi_device *dev)
 {
 	unsigned int config_bits =
 		CSCFG_PORT_MODE | CSCFG_WORD_RATE_2180_CYCLES;
@@ -5851,11 +5857,11 @@ static int init_cs5529(struct comedi_device * dev)
 		comedi_error(dev, "timeout or signal in init_cs5529()\n");
 #endif
 #ifdef NI_CS5529_DEBUG
-	rt_printk("config: 0x%x\n", cs5529_config_read(dev,
+	printk("config: 0x%x\n", cs5529_config_read(dev,
 		CSCMD_CONFIG_REGISTER));
-	rt_printk("gain: 0x%x\n", cs5529_config_read(dev,
+	printk("gain: 0x%x\n", cs5529_config_read(dev,
 		CSCMD_GAIN_REGISTER));
-	rt_printk("offset: 0x%x\n", cs5529_config_read(dev,
+	printk("offset: 0x%x\n", cs5529_config_read(dev,
 		CSCMD_OFFSET_REGISTER));
 #endif
 	return 0;
diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c
index d6357c25aca..4d408d410c2 100644
--- a/drivers/staging/comedi/drivers/ni_mio_cs.c
+++ b/drivers/staging/comedi/drivers/ni_mio_cs.c
@@ -66,103 +66,103 @@ See the notes in the ni_atmio.o driver.
 
 #define MAX_N_CALDACS 32
 
-static const ni_board ni_boards[] = {
-      {device_id:0x010d,
-	      name:	"DAQCard-ai-16xe-50",
-	      n_adchan:16,
-	      adbits:	16,
-	      ai_fifo_depth:1024,
-	      alwaysdither:0,
-	      gainlkup:ai_gain_8,
-	      ai_speed:5000,
-	      n_aochan:0,
-	      aobits:	0,
-	      ao_fifo_depth:0,
-	      ao_unipolar:0,
-	      num_p0_dio_channels:8,
-	      has_8255:0,
-	      caldac:	{dac8800, dac8043},
-		},
-      {device_id:0x010c,
-	      name:	"DAQCard-ai-16e-4",
-	      n_adchan:16,
-	      adbits:	12,
-	      ai_fifo_depth:1024,
-	      alwaysdither:0,
-	      gainlkup:ai_gain_16,
-	      ai_speed:4000,
-	      n_aochan:0,
-	      aobits:	0,
-	      ao_fifo_depth:0,
-	      ao_unipolar:0,
-	      num_p0_dio_channels:8,
-	      has_8255:0,
-	      caldac:	{mb88341},	/* verified */
-		},
-      {device_id:0x02c4,
-	      name:	"DAQCard-6062E",
-	      n_adchan:16,
-	      adbits:	12,
-	      ai_fifo_depth:8192,
-	      alwaysdither:0,
-	      gainlkup:ai_gain_16,
-	      ai_speed:2000,
-	      n_aochan:2,
-	      aobits:	12,
-	      ao_fifo_depth:2048,
-	      ao_range_table:&range_bipolar10,
-	      ao_unipolar:0,
-	      ao_speed:1176,
-	      num_p0_dio_channels:8,
-	      has_8255:0,
-	      caldac:	{ad8804_debug},	/* verified */
-		},
-      {device_id:0x075e,
-	      name:	"DAQCard-6024E",	/* specs incorrect! */
-	      n_adchan:16,
-	      adbits:	12,
-	      ai_fifo_depth:1024,
-	      alwaysdither:0,
-	      gainlkup:ai_gain_16,
-	      ai_speed:5000,
-	      n_aochan:2,
-	      aobits:	12,
-	      ao_fifo_depth:0,
-	      ao_range_table:&range_bipolar10,
-	      ao_unipolar:0,
-	      ao_speed:1000000,
-	      num_p0_dio_channels:8,
-	      has_8255:0,
-	      caldac:	{ad8804_debug},
-		},
-      {device_id:0x0245,
-	      name:	"DAQCard-6036E",	/* specs incorrect! */
-	      n_adchan:16,
-	      adbits:	16,
-	      ai_fifo_depth:1024,
-	      alwaysdither:1,
-	      gainlkup:ai_gain_4,
-	      ai_speed:5000,
-	      n_aochan:2,
-	      aobits:	16,
-	      ao_fifo_depth:0,
-	      ao_range_table:&range_bipolar10,
-	      ao_unipolar:0,
-	      ao_speed:1000000,
-	      num_p0_dio_channels:8,
-	      has_8255:0,
-	      caldac:	{ad8804_debug},
-		},
+static const struct ni_board_struct ni_boards[] = {
+	{.device_id = 0x010d,
+	 .name = "DAQCard-ai-16xe-50",
+	 .n_adchan = 16,
+	 .adbits = 16,
+	 .ai_fifo_depth = 1024,
+	 .alwaysdither = 0,
+	 .gainlkup = ai_gain_8,
+	 .ai_speed = 5000,
+	 .n_aochan = 0,
+	 .aobits = 0,
+	 .ao_fifo_depth = 0,
+	 .ao_unipolar = 0,
+	 .num_p0_dio_channels = 8,
+	 .has_8255 = 0,
+	 .caldac = {dac8800, dac8043},
+	},
+	{.device_id = 0x010c,
+	 .name = "DAQCard-ai-16e-4",
+	 .n_adchan = 16,
+	 .adbits = 12,
+	 .ai_fifo_depth = 1024,
+	 .alwaysdither = 0,
+	 .gainlkup = ai_gain_16,
+	 .ai_speed = 4000,
+	 .n_aochan = 0,
+	 .aobits = 0,
+	 .ao_fifo_depth = 0,
+	 .ao_unipolar = 0,
+	 .num_p0_dio_channels = 8,
+	 .has_8255 = 0,
+	 .caldac = {mb88341},	/* verified */
+	},
+	{.device_id = 0x02c4,
+	 .name = "DAQCard-6062E",
+	 .n_adchan = 16,
+	 .adbits = 12,
+	 .ai_fifo_depth = 8192,
+	 .alwaysdither = 0,
+	 .gainlkup = ai_gain_16,
+	 .ai_speed = 2000,
+	 .n_aochan = 2,
+	 .aobits = 12,
+	 .ao_fifo_depth = 2048,
+	 .ao_range_table = &range_bipolar10,
+	 .ao_unipolar = 0,
+	 .ao_speed = 1176,
+	 .num_p0_dio_channels = 8,
+	 .has_8255 = 0,
+	 .caldac = {ad8804_debug},	/* verified */
+	},
+	{.device_id = 0x075e,
+	 .name = "DAQCard-6024E",	/* specs incorrect! */
+	 .n_adchan = 16,
+	 .adbits = 12,
+	 .ai_fifo_depth = 1024,
+	 .alwaysdither = 0,
+	 .gainlkup = ai_gain_16,
+	 .ai_speed = 5000,
+	 .n_aochan = 2,
+	 .aobits = 12,
+	 .ao_fifo_depth = 0,
+	 .ao_range_table = &range_bipolar10,
+	 .ao_unipolar = 0,
+	 .ao_speed = 1000000,
+	 .num_p0_dio_channels = 8,
+	 .has_8255 = 0,
+	 .caldac = {ad8804_debug},
+	},
+	{.device_id = 0x0245,
+	 .name = "DAQCard-6036E",	/* specs incorrect! */
+	 .n_adchan = 16,
+	 .adbits = 16,
+	 .ai_fifo_depth = 1024,
+	 .alwaysdither = 1,
+	 .gainlkup = ai_gain_4,
+	 .ai_speed = 5000,
+	 .n_aochan = 2,
+	 .aobits = 16,
+	 .ao_fifo_depth = 0,
+	 .ao_range_table = &range_bipolar10,
+	 .ao_unipolar = 0,
+	 .ao_speed = 1000000,
+	 .num_p0_dio_channels = 8,
+	 .has_8255 = 0,
+	 .caldac = {ad8804_debug},
+	},
 #if 0
-      {device_id:0x0000,	/* unknown */
-	      name:	"DAQCard-6715",
-	      n_adchan:0,
-	      n_aochan:8,
-	      aobits:	12,
-	      ao_671x:	8192,
-	      num_p0_dio_channels:8,
-	      caldac:	{mb88341, mb88341},
-		},
+	{.device_id = 0x0000,	/* unknown */
+	 .name = "DAQCard-6715",
+	 .n_adchan = 0,
+	 .n_aochan = 8,
+	 .aobits = 12,
+	 .ao_671x = 8192,
+	 .num_p0_dio_channels = 8,
+	 .caldac = {mb88341, mb88341},
+	},
 #endif
 	/* N.B. Update ni_mio_cs_ids[] when entries added above. */
 };
@@ -183,11 +183,11 @@ struct ni_private {
 
 /* How we access registers */
 
-#define ni_writel(a,b)		(outl((a),(b)+dev->iobase))
+#define ni_writel(a, b)		(outl((a), (b)+dev->iobase))
 #define ni_readl(a)		(inl((a)+dev->iobase))
-#define ni_writew(a,b)		(outw((a),(b)+dev->iobase))
+#define ni_writew(a, b)		(outw((a), (b)+dev->iobase))
 #define ni_readw(a)		(inw((a)+dev->iobase))
-#define ni_writeb(a,b)		(outb((a),(b)+dev->iobase))
+#define ni_writeb(a, b)		(outb((a), (b)+dev->iobase))
 #define ni_readb(a)		(inb((a)+dev->iobase))
 
 /* How we access windowed registers */
@@ -196,60 +196,60 @@ struct ni_private {
  * read/written directly in the I/O space of the board.  The
  * DAQCard devices map the low 8 STC registers to iobase+addr*2. */
 
-static void mio_cs_win_out(struct comedi_device * dev, uint16_t data, int addr)
+static void mio_cs_win_out(struct comedi_device *dev, uint16_t data, int addr)
 {
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&devpriv->window_lock, flags);
+	spin_lock_irqsave(&devpriv->window_lock, flags);
 	if (addr < 8) {
 		ni_writew(data, addr * 2);
 	} else {
 		ni_writew(addr, Window_Address);
 		ni_writew(data, Window_Data);
 	}
-	comedi_spin_unlock_irqrestore(&devpriv->window_lock, flags);
+	spin_unlock_irqrestore(&devpriv->window_lock, flags);
 }
 
-static uint16_t mio_cs_win_in(struct comedi_device * dev, int addr)
+static uint16_t mio_cs_win_in(struct comedi_device *dev, int addr)
 {
 	unsigned long flags;
 	uint16_t ret;
 
-	comedi_spin_lock_irqsave(&devpriv->window_lock, flags);
+	spin_lock_irqsave(&devpriv->window_lock, flags);
 	if (addr < 8) {
 		ret = ni_readw(addr * 2);
 	} else {
 		ni_writew(addr, Window_Address);
 		ret = ni_readw(Window_Data);
 	}
-	comedi_spin_unlock_irqrestore(&devpriv->window_lock, flags);
+	spin_unlock_irqrestore(&devpriv->window_lock, flags);
 
 	return ret;
 }
 
-static int mio_cs_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int mio_cs_detach(struct comedi_device * dev);
+static int mio_cs_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int mio_cs_detach(struct comedi_device *dev);
 static struct comedi_driver driver_ni_mio_cs = {
-      driver_name:"ni_mio_cs",
-      module:THIS_MODULE,
-      attach:mio_cs_attach,
-      detach:mio_cs_detach,
+	.driver_name = "ni_mio_cs",
+	.module = THIS_MODULE,
+	.attach = mio_cs_attach,
+	.detach = mio_cs_detach,
 };
 
 #include "ni_mio_common.c"
 
-static int ni_getboardtype(struct comedi_device * dev, struct pcmcia_device *link);
+static int ni_getboardtype(struct comedi_device *dev, struct pcmcia_device *link);
 
 /* clean up allocated resources */
 /* called when driver is removed */
-static int mio_cs_detach(struct comedi_device * dev)
+static int mio_cs_detach(struct comedi_device *dev)
 {
 	mio_common_detach(dev);
 
 	/* PCMCIA layer frees the IO region */
 
 	if (dev->irq) {
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 	}
 
 	return 0;
@@ -344,7 +344,7 @@ static void mio_cs_config(struct pcmcia_device *link)
 		manfid = le16_to_cpu(buf[0]);
 		prodid = le16_to_cpu(buf[1]);
 	}
-	//printk("manfid = 0x%04x, 0x%04x\n",manfid,prodid);
+	/* printk("manfid = 0x%04x, 0x%04x\n",manfid,prodid); */
 
 	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
 	tuple.Attributes = 0;
@@ -381,7 +381,7 @@ static void mio_cs_config(struct pcmcia_device *link)
 		for (base = 0x000; base < 0x400; base += 0x20) {
 			link->io.BasePort1 = base;
 			ret = pcmcia_request_io(link, &link->io);
-			//printk("RequestIO 0x%02x\n",ret);
+			/* printk("RequestIO 0x%02x\n",ret); */
 			if (!ret)
 				break;
 		}
@@ -393,17 +393,17 @@ static void mio_cs_config(struct pcmcia_device *link)
 	if (ret) {
 		printk("pcmcia_request_irq() returned error: %i\n", ret);
 	}
-	//printk("RequestIRQ 0x%02x\n",ret);
+	/* printk("RequestIRQ 0x%02x\n",ret); */
 
 	link->conf.ConfigIndex = 1;
 
 	ret = pcmcia_request_configuration(link, &link->conf);
-	//printk("RequestConfiguration %d\n",ret);
+	/* printk("RequestConfiguration %d\n",ret); */
 
 	link->dev_node = &dev_node;
 }
 
-static int mio_cs_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int mio_cs_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct pcmcia_device *link;
 	unsigned int irq;
@@ -446,29 +446,33 @@ static int mio_cs_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	printk(" %s", boardtype.name);
 	dev->board_name = boardtype.name;
 
-	if ((ret = comedi_request_irq(irq, ni_E_interrupt, NI_E_IRQ_FLAGS,
-				"ni_mio_cs", dev)) < 0) {
+	ret = request_irq(irq, ni_E_interrupt, NI_E_IRQ_FLAGS,
+				 "ni_mio_cs", dev);
+	if (ret < 0) {
 		printk(" irq not available\n");
 		return -EINVAL;
 	}
 	dev->irq = irq;
 
 	/* allocate private area */
-	if ((ret = ni_alloc_private(dev)) < 0)
+	ret = ni_alloc_private(dev);
+	if (ret < 0)
 		return ret;
+
 	devpriv->stc_writew = &mio_cs_win_out;
 	devpriv->stc_readw = &mio_cs_win_in;
 	devpriv->stc_writel = &win_out2;
 	devpriv->stc_readl = &win_in2;
 
-	if ((ret = ni_E_init(dev, it)) < 0) {
+	ret = ni_E_init(dev, it);
+
+	if (ret < 0)
 		return ret;
-	}
 
 	return 0;
 }
 
-static int get_prodid(struct comedi_device * dev, struct pcmcia_device *link)
+static int get_prodid(struct comedi_device *dev, struct pcmcia_device *link)
 {
 	tuple_t tuple;
 	u_short buf[128];
@@ -487,7 +491,7 @@ static int get_prodid(struct comedi_device * dev, struct pcmcia_device *link)
 	return prodid;
 }
 
-static int ni_getboardtype(struct comedi_device * dev, struct pcmcia_device *link)
+static int ni_getboardtype(struct comedi_device *dev, struct pcmcia_device *link)
 {
 	int id;
 	int i;
diff --git a/drivers/staging/comedi/drivers/ni_pcidio.c b/drivers/staging/comedi/drivers/ni_pcidio.c
index 87def2cc9a2..6b86a39aac5 100644
--- a/drivers/staging/comedi/drivers/ni_pcidio.c
+++ b/drivers/staging/comedi/drivers/ni_pcidio.c
@@ -66,9 +66,10 @@ comedi_nonfree_firmware tarball available from http://www.comedi.org
  */
 
 #define USE_DMA
-//#define DEBUG 1
-//#define DEBUG_FLAGS
+/* #define DEBUG 1 */
+/* #define DEBUG_FLAGS */
 
+#include <linux/interrupt.h>
 #include "../comedidev.h"
 
 #include "mite.h"
@@ -117,9 +118,9 @@ comedi_nonfree_firmware tarball available from http://www.comedi.org
 #define Waited				(1<<5)
 #define PrimaryTC				(1<<6)
 #define SecondaryTC				(1<<7)
-  //#define SerialRose
-  //#define ReqRose
-  //#define Paused
+  /* #define SerialRose */
+  /* #define ReqRose */
+  /* #define Paused */
 
 #define Group_1_First_Clear		6	/* W */
 #define Group_2_First_Clear		7	/* W */
@@ -206,7 +207,7 @@ comedi_nonfree_firmware tarball available from http://www.comedi.org
 
 #define DMA_Line_Control_Group1		76
 #define DMA_Line_Control_Group2		108
-// channel zero is none
+/* channel zero is none */
 static inline unsigned primary_DMAChannel_bits(unsigned channel)
 {
 	return channel & 0x3;
@@ -287,15 +288,15 @@ enum FPGA_Control_Bits {
 #define IntEn (TransferReady|CountExpired|Waited|PrimaryTC|SecondaryTC)
 #endif
 
-static int nidio_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int nidio_detach(struct comedi_device * dev);
-static int ni_pcidio_cancel(struct comedi_device * dev, struct comedi_subdevice * s);
+static int nidio_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int nidio_detach(struct comedi_device *dev);
+static int ni_pcidio_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
 
 static struct comedi_driver driver_pcidio = {
-      driver_name:"ni_pcidio",
-      module:THIS_MODULE,
-      attach:nidio_attach,
-      detach:nidio_detach,
+	.driver_name = "ni_pcidio",
+	.module = THIS_MODULE,
+	.attach = nidio_attach,
+	.detach = nidio_detach,
 };
 
 struct nidio_board {
@@ -309,65 +310,65 @@ struct nidio_board {
 
 static const struct nidio_board nidio_boards[] = {
 	{
-	      dev_id:	0x1150,
-	      name:	"pci-dio-32hs",
-	      n_8255:	0,
-	      is_diodaq:1,
+	.dev_id = 0x1150,
+	.name = "pci-dio-32hs",
+	.n_8255 = 0,
+	.is_diodaq = 1,
 		},
 	{
-	      dev_id:	0x1320,
-	      name:	"pxi-6533",
-	      n_8255:	0,
-	      is_diodaq:1,
+	.dev_id = 0x1320,
+	.name = "pxi-6533",
+	.n_8255 = 0,
+	.is_diodaq = 1,
 		},
 	{
-	      dev_id:	0x12b0,
-	      name:	"pci-6534",
-	      n_8255:	0,
-	      is_diodaq:1,
-	      uses_firmware:1,
+	.dev_id = 0x12b0,
+	.name = "pci-6534",
+	.n_8255 = 0,
+	.is_diodaq = 1,
+	.uses_firmware = 1,
 		},
 	{
-	      dev_id:	0x0160,
-	      name:	"pci-dio-96",
-	      n_8255:	4,
-	      is_diodaq:0,
+	.dev_id = 0x0160,
+	.name = "pci-dio-96",
+	.n_8255 = 4,
+	.is_diodaq = 0,
 		},
 	{
-	      dev_id:	0x1630,
-	      name:	"pci-dio-96b",
-	      n_8255:	4,
-	      is_diodaq:0,
+	.dev_id = 0x1630,
+	.name = "pci-dio-96b",
+	.n_8255 = 4,
+	.is_diodaq = 0,
 		},
 	{
-	      dev_id:	0x13c0,
-	      name:	"pxi-6508",
-	      n_8255:	4,
-	      is_diodaq:0,
+	.dev_id = 0x13c0,
+	.name = "pxi-6508",
+	.n_8255 = 4,
+	.is_diodaq = 0,
 		},
 	{
-	      dev_id:	0x0400,
-	      name:	"pci-6503",
-	      n_8255:	1,
-	      is_diodaq:0,
+	.dev_id = 0x0400,
+	.name = "pci-6503",
+	.n_8255 = 1,
+	.is_diodaq = 0,
 		},
 	{
-	      dev_id:	0x1250,
-	      name:	"pci-6503b",
-	      n_8255:	1,
-	      is_diodaq:0,
+	.dev_id = 0x1250,
+	.name = "pci-6503b",
+	.n_8255 = 1,
+	.is_diodaq = 0,
 		},
 	{
-	      dev_id:	0x17d0,
-	      name:	"pci-6503x",
-	      n_8255:	1,
-	      is_diodaq:0,
+	.dev_id = 0x17d0,
+	.name = "pci-6503x",
+	.n_8255 = 1,
+	.is_diodaq = 0,
 		},
 	{
-	      dev_id:	0x1800,
-	      name:	"pxi-6503",
-	      n_8255:	1,
-	      is_diodaq:0,
+	.dev_id = 0x1800,
+	.name = "pxi-6503",
+	.n_8255 = 1,
+	.is_diodaq = 0,
 		},
 };
 
@@ -401,14 +402,14 @@ struct nidio96_private {
 };
 #define devpriv ((struct nidio96_private *)dev->private)
 
-static int ni_pcidio_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd);
-static int ni_pcidio_cmd(struct comedi_device * dev, struct comedi_subdevice * s);
-static int ni_pcidio_inttrig(struct comedi_device * dev, struct comedi_subdevice * s,
+static int ni_pcidio_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd);
+static int ni_pcidio_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
+static int ni_pcidio_inttrig(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int trignum);
-static int nidio_find_device(struct comedi_device * dev, int bus, int slot);
+static int nidio_find_device(struct comedi_device *dev, int bus, int slot);
 static int ni_pcidio_ns_to_timer(int *nanosec, int round_mode);
-static int setup_mite_dma(struct comedi_device * dev, struct comedi_subdevice * s);
+static int setup_mite_dma(struct comedi_device *dev, struct comedi_subdevice *s);
 
 #ifdef DEBUG_FLAGS
 static void ni_pcidio_print_flags(unsigned int flags);
@@ -418,18 +419,17 @@ static void ni_pcidio_print_status(unsigned int status);
 #define ni_pcidio_print_status(x)
 #endif
 
-static int ni_pcidio_request_di_mite_channel(struct comedi_device * dev)
+static int ni_pcidio_request_di_mite_channel(struct comedi_device *dev)
 {
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+	spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
 	BUG_ON(devpriv->di_mite_chan);
 	devpriv->di_mite_chan =
 		mite_request_channel_in_range(devpriv->mite,
 		devpriv->di_mite_ring, 1, 2);
 	if (devpriv->di_mite_chan == NULL) {
-		comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock,
-			flags);
+		spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
 		comedi_error(dev, "failed to reserve mite dma channel.");
 		return -EBUSY;
 	}
@@ -437,15 +437,15 @@ static int ni_pcidio_request_di_mite_channel(struct comedi_device * dev)
 		secondary_DMAChannel_bits(devpriv->di_mite_chan->channel),
 		devpriv->mite->daq_io_addr + DMA_Line_Control_Group1);
 	mmiowb();
-	comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+	spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
 	return 0;
 }
 
-static void ni_pcidio_release_di_mite_channel(struct comedi_device * dev)
+static void ni_pcidio_release_di_mite_channel(struct comedi_device *dev)
 {
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+	spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
 	if (devpriv->di_mite_chan) {
 		mite_dma_disarm(devpriv->di_mite_chan);
 		mite_dma_reset(devpriv->di_mite_chan);
@@ -456,7 +456,7 @@ static void ni_pcidio_release_di_mite_channel(struct comedi_device * dev)
 			devpriv->mite->daq_io_addr + DMA_Line_Control_Group1);
 		mmiowb();
 	}
-	comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+	spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
 }
 
 static int nidio96_8255_cb(int dir, int port, int data, unsigned long iobase)
@@ -469,7 +469,7 @@ static int nidio96_8255_cb(int dir, int port, int data, unsigned long iobase)
 	}
 }
 
-void ni_pcidio_event(struct comedi_device * dev, struct comedi_subdevice * s)
+void ni_pcidio_event(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	if (s->async->
 		events & (COMEDI_CB_EOA | COMEDI_CB_ERROR | COMEDI_CB_OVERFLOW))
@@ -479,14 +479,14 @@ void ni_pcidio_event(struct comedi_device * dev, struct comedi_subdevice * s)
 	comedi_event(dev, s);
 }
 
-static irqreturn_t nidio_interrupt(int irq, void *d PT_REGS_ARG)
+static irqreturn_t nidio_interrupt(int irq, void *d)
 {
 	struct comedi_device *dev = d;
 	struct comedi_subdevice *s = dev->subdevices;
 	struct comedi_async *async = s->async;
 	struct mite_struct *mite = devpriv->mite;
 
-	//int i, j;
+	/* int i, j; */
 	long int AuxData = 0;
 	short data1 = 0;
 	short data2 = 0;
@@ -496,9 +496,9 @@ static irqreturn_t nidio_interrupt(int irq, void *d PT_REGS_ARG)
 	unsigned int m_status = 0;
 	unsigned long irq_flags;
 
-	//interrupcions parasites
+	/* interrupcions parasites */
 	if (dev->attached == 0) {
-		// assume it's from another card
+		/* assume it's from another card */
 		return IRQ_NONE;
 	}
 
@@ -511,17 +511,17 @@ static irqreturn_t nidio_interrupt(int irq, void *d PT_REGS_ARG)
 	ni_pcidio_print_flags(flags);
 	ni_pcidio_print_status(status);
 
-	//printk("buf[0]=%08x\n",*(unsigned int *)async->prealloc_buf);
-	//printk("buf[4096]=%08x\n",*(unsigned int *)(async->prealloc_buf+4096));
+	/* printk("buf[0]=%08x\n",*(unsigned int *)async->prealloc_buf); */
+	/* printk("buf[4096]=%08x\n",*(unsigned int *)(async->prealloc_buf+4096)); */
 
-	comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, irq_flags);
+	spin_lock_irqsave(&devpriv->mite_channel_lock, irq_flags);
 	if (devpriv->di_mite_chan)
 		m_status = mite_get_status(devpriv->di_mite_chan);
 #ifdef MITE_DEBUG
 	mite_print_chsr(m_status);
 #endif
-	//printk("mite_bytes_transferred: %d\n",mite_bytes_transferred(mite,DI_DMA_CHAN));
-	//mite_dump_regs(mite);
+	/* printk("mite_bytes_transferred: %d\n",mite_bytes_transferred(mite,DI_DMA_CHAN)); */
+	/* mite_dump_regs(mite); */
 	if (m_status & CHSR_INT) {
 		if (m_status & CHSR_LINKC) {
 			writel(CHOR_CLRLC,
@@ -537,7 +537,7 @@ static irqreturn_t nidio_interrupt(int irq, void *d PT_REGS_ARG)
 			disable_irq(dev->irq);
 		}
 	}
-	comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, irq_flags);
+	spin_unlock_irqrestore(&devpriv->mite_channel_lock, irq_flags);
 
 	while (status & DataLeft) {
 		work++;
@@ -552,7 +552,7 @@ static irqreturn_t nidio_interrupt(int irq, void *d PT_REGS_ARG)
 		flags &= IntEn;
 
 		if (flags & TransferReady) {
-			//DPRINTK("TransferReady\n");
+			/* DPRINTK("TransferReady\n"); */
 			while (flags & TransferReady) {
 				work++;
 				if (work > 100) {
@@ -569,14 +569,14 @@ static irqreturn_t nidio_interrupt(int irq, void *d PT_REGS_ARG)
 				data2 = (AuxData & 0xffff0000) >> 16;
 				comedi_buf_put(async, data1);
 				comedi_buf_put(async, data2);
-				//DPRINTK("read:%d, %d\n",data1,data2);
+				/* DPRINTK("read:%d, %d\n",data1,data2); */
 				flags = readb(devpriv->mite->daq_io_addr +
 					Group_1_Flags);
 			}
-			//DPRINTK("buf_int_count: %d\n",async->buf_int_count);
-			//DPRINTK("1) IntEn=%d,flags=%d,status=%d\n",IntEn,flags,status);
-			//ni_pcidio_print_flags(flags);
-			//ni_pcidio_print_status(status);
+			/* DPRINTK("buf_int_count: %d\n",async->buf_int_count); */
+			/* DPRINTK("1) IntEn=%d,flags=%d,status=%d\n",IntEn,flags,status); */
+			/* ni_pcidio_print_flags(flags); */
+			/* ni_pcidio_print_status(status); */
 			async->events |= COMEDI_CB_BLOCK;
 		}
 
@@ -621,10 +621,10 @@ static irqreturn_t nidio_interrupt(int irq, void *d PT_REGS_ARG)
 		flags = readb(devpriv->mite->daq_io_addr + Group_1_Flags);
 		status = readb(devpriv->mite->daq_io_addr +
 			Interrupt_And_Window_Status);
-		//DPRINTK("loop end: IntEn=0x%02x,flags=0x%02x,status=0x%02x\n",
-		//      IntEn,flags,status);
-		//ni_pcidio_print_flags(flags);
-		//ni_pcidio_print_status(status);
+		/* DPRINTK("loop end: IntEn=0x%02x,flags=0x%02x,status=0x%02x\n", */
+		/* IntEn,flags,status); */
+		/* ni_pcidio_print_flags(flags); */
+		/* ni_pcidio_print_status(status); */
 	}
 
       out:
@@ -963,7 +963,7 @@ static int ni_pcidio_cmd(struct comedi_device * dev, struct comedi_subdevice * s
 
 	/* clear and enable interrupts */
 	writeb(0xff, devpriv->mite->daq_io_addr + Group_1_First_Clear);
-	//writeb(ClearExpired,devpriv->mite->daq_io_addr+Group_1_Second_Clear);
+	/* writeb(ClearExpired,devpriv->mite->daq_io_addr+Group_1_Second_Clear); */
 
 	writeb(IntEn, devpriv->mite->daq_io_addr + Interrupt_Control);
 	writeb(0x03,
@@ -971,7 +971,7 @@ static int ni_pcidio_cmd(struct comedi_device * dev, struct comedi_subdevice * s
 
 	if (cmd->stop_src == TRIG_NONE) {
 		devpriv->OpModeBits = DataLatching(0) | RunMode(7);
-	} else {		// TRIG_TIMER
+	} else {		/* TRIG_TIMER */
 		devpriv->OpModeBits = Numbered | RunMode(7);
 	}
 	if (cmd->start_src == TRIG_NOW) {
@@ -1235,8 +1235,8 @@ static int nidio_attach(struct comedi_device * dev, struct comedi_devconfig * it
 			devpriv->mite->daq_io_addr +
 			Master_DMA_And_Interrupt_Control);
 
-		ret = comedi_request_irq(irq, nidio_interrupt, IRQF_SHARED,
-			"ni_pcidio", dev);
+		ret = request_irq(irq, nidio_interrupt, IRQF_SHARED,
+				  "ni_pcidio", dev);
 		if (ret < 0) {
 			printk(" irq not available");
 		}
@@ -1259,7 +1259,7 @@ static int nidio_detach(struct comedi_device * dev)
 	}
 
 	if (dev->irq)
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 
 	if (devpriv) {
 		if (devpriv->di_mite_ring) {
diff --git a/drivers/staging/comedi/drivers/ni_pcimio.c b/drivers/staging/comedi/drivers/ni_pcimio.c
index 3a2aba7c8dd..1d04b75dec2 100644
--- a/drivers/staging/comedi/drivers/ni_pcimio.c
+++ b/drivers/staging/comedi/drivers/ni_pcimio.c
@@ -101,7 +101,7 @@ Bugs:
 
 	need to slow down DAC loading.  I don't trust NI's claim that
 	two writes to the PCI bus slows IO enough.  I would prefer to
-	use comedi_udelay().  Timing specs: (clock)
+	use udelay().  Timing specs: (clock)
 		AD8522		30ns
 		DAC8043		120ns
 		DAC8800		60ns
@@ -117,7 +117,7 @@ Bugs:
 #include "ni_stc.h"
 #include "mite.h"
 
-//#define PCI_DEBUG
+/* #define PCI_DEBUG */
 
 #define PCIDMA
 
@@ -216,9 +216,9 @@ static const struct comedi_lrange range_ni_M_622x_ao = { 1, {
 	}
 };
 
-static const ni_board ni_boards[] = {
+static const struct ni_board_struct ni_boards[] = {
 	{
-			.device_id = 0x0162,	// NI also says 0x1620.  typo?
+			.device_id = 0x0162,	/*  NI also says 0x1620.  typo? */
 			.name = "pci-mio-16xe-50",
 			.n_adchan = 16,
 			.adbits = 16,
@@ -238,7 +238,7 @@ static const ni_board ni_boards[] = {
 		},
 	{
 			.device_id = 0x1170,
-			.name = "pci-mio-16xe-10",	// aka pci-6030E
+			.name = "pci-mio-16xe-10",	/*  aka pci-6030E */
 			.n_adchan = 16,
 			.adbits = 16,
 			.ai_fifo_depth = 512,
@@ -320,7 +320,7 @@ static const ni_board ni_boards[] = {
 			.ai_fifo_depth = 512,
 			.alwaysdither = 0,
 			.gainlkup = ai_gain_16,
-			/* Note: there have been reported problems with full speed
+			/*	.Note = there have been reported problems with full speed
 			 * on this board */
 			.ai_speed = 2000,
 			.n_aochan = 2,
@@ -330,7 +330,7 @@ static const ni_board ni_boards[] = {
 			.ao_unipolar = 1,
 			.ao_speed = 1000,
 			.num_p0_dio_channels = 8,
-			.caldac = {ad8804_debug},	// doc says mb88341
+			.caldac = {ad8804_debug},	/*  doc says mb88341 */
 			.has_8255 = 0,
 		},
 	{
@@ -846,7 +846,7 @@ static const ni_board ni_boards[] = {
 			.n_adchan = 16,
 			.adbits = 16,
 			.ai_fifo_depth = 512,
-			//FIXME:  guess
+			/*	.FIXME = guess */
 			.gainlkup = ai_gain_622x,
 			.ai_speed = 4000,
 			.n_aochan = 0,
@@ -1207,28 +1207,29 @@ static const ni_board ni_boards[] = {
 
 #define n_pcimio_boards ((sizeof(ni_boards)/sizeof(ni_boards[0])))
 
-static int pcimio_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int pcimio_detach(struct comedi_device * dev);
+static int pcimio_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int pcimio_detach(struct comedi_device *dev);
 static struct comedi_driver driver_pcimio = {
-	driver_name: DRV_NAME,
-	module:THIS_MODULE,
-	attach:pcimio_attach,
-	detach:pcimio_detach,
+	.driver_name = DRV_NAME,
+	.module = THIS_MODULE,
+	.attach = pcimio_attach,
+	.detach = pcimio_detach,
 };
 
 COMEDI_PCI_INITCLEANUP(driver_pcimio, ni_pci_table)
 
-typedef struct {
-NI_PRIVATE_COMMON} ni_private;
-#define devpriv ((ni_private *)dev->private)
+struct ni_private {
+	NI_PRIVATE_COMMON
+};
+#define devpriv ((struct ni_private *)dev->private)
 
 /* How we access registers */
 
-#define ni_writel(a,b)	(writel((a), devpriv->mite->daq_io_addr + (b)))
+#define ni_writel(a, b)	(writel((a), devpriv->mite->daq_io_addr + (b)))
 #define ni_readl(a)	(readl(devpriv->mite->daq_io_addr + (a)))
-#define ni_writew(a,b)	(writew((a), devpriv->mite->daq_io_addr + (b)))
+#define ni_writew(a, b)	(writew((a), devpriv->mite->daq_io_addr + (b)))
 #define ni_readw(a)	(readw(devpriv->mite->daq_io_addr + (a)))
-#define ni_writeb(a,b)	(writeb((a), devpriv->mite->daq_io_addr + (b)))
+#define ni_writeb(a, b)	(writeb((a), devpriv->mite->daq_io_addr + (b)))
 #define ni_readb(a)	(readb(devpriv->mite->daq_io_addr + (a)))
 
 /* How we access STC registers */
@@ -1241,30 +1242,30 @@ NI_PRIVATE_COMMON} ni_private;
 /* However, the 611x boards still aren't working, so I'm disabling
  * non-windowed STC access temporarily */
 
-static void e_series_win_out(struct comedi_device * dev, uint16_t data, int reg)
+static void e_series_win_out(struct comedi_device *dev, uint16_t data, int reg)
 {
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&devpriv->window_lock, flags);
+	spin_lock_irqsave(&devpriv->window_lock, flags);
 	ni_writew(reg, Window_Address);
 	ni_writew(data, Window_Data);
-	comedi_spin_unlock_irqrestore(&devpriv->window_lock, flags);
+	spin_unlock_irqrestore(&devpriv->window_lock, flags);
 }
 
-static uint16_t e_series_win_in(struct comedi_device * dev, int reg)
+static uint16_t e_series_win_in(struct comedi_device *dev, int reg)
 {
 	unsigned long flags;
 	uint16_t ret;
 
-	comedi_spin_lock_irqsave(&devpriv->window_lock, flags);
+	spin_lock_irqsave(&devpriv->window_lock, flags);
 	ni_writew(reg, Window_Address);
 	ret = ni_readw(Window_Data);
-	comedi_spin_unlock_irqrestore(&devpriv->window_lock, flags);
+	spin_unlock_irqrestore(&devpriv->window_lock, flags);
 
 	return ret;
 }
 
-static void m_series_stc_writew(struct comedi_device * dev, uint16_t data, int reg)
+static void m_series_stc_writew(struct comedi_device *dev, uint16_t data, int reg)
 {
 	unsigned offset;
 	switch (reg) {
@@ -1293,12 +1294,12 @@ static void m_series_stc_writew(struct comedi_device * dev, uint16_t data, int r
 		offset = M_Offset_AI_Personal;
 		break;
 	case AI_SI2_Load_A_Register:
-		// this is actually a 32 bit register on m series boards
+		/*  this is actually a 32 bit register on m series boards */
 		ni_writel(data, M_Offset_AI_SI2_Load_A);
 		return;
 		break;
 	case AI_SI2_Load_B_Register:
-		// this is actually a 32 bit register on m series boards
+		/*  this is actually a 32 bit register on m series boards */
 		ni_writel(data, M_Offset_AI_SI2_Load_B);
 		return;
 		break;
@@ -1348,9 +1349,9 @@ static void m_series_stc_writew(struct comedi_device * dev, uint16_t data, int r
 		offset = M_Offset_AO_FIFO_Clear;
 		break;
 	case DIO_Control_Register:
-		rt_printk
+		printk
 			("%s: FIXME: register 0x%x does not map cleanly on to m-series boards.\n",
-			__FUNCTION__, reg);
+			__func__, reg);
 		return;
 		break;
 	case G_Autoincrement_Register(0):
@@ -1410,8 +1411,8 @@ static void m_series_stc_writew(struct comedi_device * dev, uint16_t data, int r
 		/* FIXME: DIO_Output_Register (16 bit reg) is replaced by M_Offset_Static_Digital_Output (32 bit)
 		   and M_Offset_SCXI_Serial_Data_Out (8 bit) */
 	default:
-		rt_printk("%s: bug! unhandled register=0x%x in switch.\n",
-			__FUNCTION__, reg);
+		printk("%s: bug! unhandled register=0x%x in switch.\n",
+			__func__, reg);
 		BUG();
 		return;
 		break;
@@ -1419,7 +1420,7 @@ static void m_series_stc_writew(struct comedi_device * dev, uint16_t data, int r
 	ni_writew(data, offset);
 }
 
-static uint16_t m_series_stc_readw(struct comedi_device * dev, int reg)
+static uint16_t m_series_stc_readw(struct comedi_device *dev, int reg)
 {
 	unsigned offset;
 	switch (reg) {
@@ -1445,8 +1446,8 @@ static uint16_t m_series_stc_readw(struct comedi_device * dev, int reg)
 		offset = M_Offset_G01_Status;
 		break;
 	default:
-		rt_printk("%s: bug! unhandled register=0x%x in switch.\n",
-			__FUNCTION__, reg);
+		printk("%s: bug! unhandled register=0x%x in switch.\n",
+			__func__, reg);
 		BUG();
 		return 0;
 		break;
@@ -1454,7 +1455,7 @@ static uint16_t m_series_stc_readw(struct comedi_device * dev, int reg)
 	return ni_readw(offset);
 }
 
-static void m_series_stc_writel(struct comedi_device * dev, uint32_t data, int reg)
+static void m_series_stc_writel(struct comedi_device *dev, uint32_t data, int reg)
 {
 	unsigned offset;
 	switch (reg) {
@@ -1486,8 +1487,8 @@ static void m_series_stc_writel(struct comedi_device * dev, uint32_t data, int r
 		offset = M_Offset_G1_Load_B;
 		break;
 	default:
-		rt_printk("%s: bug! unhandled register=0x%x in switch.\n",
-			__FUNCTION__, reg);
+		printk("%s: bug! unhandled register=0x%x in switch.\n",
+			__func__, reg);
 		BUG();
 		return;
 		break;
@@ -1495,7 +1496,7 @@ static void m_series_stc_writel(struct comedi_device * dev, uint32_t data, int r
 	ni_writel(data, offset);
 }
 
-static uint32_t m_series_stc_readl(struct comedi_device * dev, int reg)
+static uint32_t m_series_stc_readl(struct comedi_device *dev, int reg)
 {
 	unsigned offset;
 	switch (reg) {
@@ -1512,8 +1513,8 @@ static uint32_t m_series_stc_readl(struct comedi_device * dev, int reg)
 		offset = M_Offset_G1_Save;
 		break;
 	default:
-		rt_printk("%s: bug! unhandled register=0x%x in switch.\n",
-			__FUNCTION__, reg);
+		printk("%s: bug! unhandled register=0x%x in switch.\n",
+			__func__, reg);
 		BUG();
 		return 0;
 		break;
@@ -1528,19 +1529,19 @@ static uint32_t m_series_stc_readl(struct comedi_device * dev, int reg)
 
 #include "ni_mio_common.c"
 
-static int pcimio_find_device(struct comedi_device * dev, int bus, int slot);
-static int pcimio_ai_change(struct comedi_device * dev, struct comedi_subdevice * s,
+static int pcimio_find_device(struct comedi_device *dev, int bus, int slot);
+static int pcimio_ai_change(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned long new_size);
-static int pcimio_ao_change(struct comedi_device * dev, struct comedi_subdevice * s,
+static int pcimio_ao_change(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned long new_size);
-static int pcimio_gpct0_change(struct comedi_device * dev, struct comedi_subdevice * s,
+static int pcimio_gpct0_change(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned long new_size);
-static int pcimio_gpct1_change(struct comedi_device * dev, struct comedi_subdevice * s,
+static int pcimio_gpct1_change(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned long new_size);
-static int pcimio_dio_change(struct comedi_device * dev, struct comedi_subdevice * s,
+static int pcimio_dio_change(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned long new_size);
 
-static void m_series_init_eeprom_buffer(struct comedi_device * dev)
+static void m_series_init_eeprom_buffer(struct comedi_device *dev)
 {
 	static const int Start_Cal_EEPROM = 0x400;
 	static const unsigned window_size = 10;
@@ -1577,19 +1578,19 @@ static void m_series_init_eeprom_buffer(struct comedi_device * dev)
 	writel(0x0, devpriv->mite->mite_io_addr + 0x30);
 }
 
-static void init_6143(struct comedi_device * dev)
+static void init_6143(struct comedi_device *dev)
 {
-	// Disable interrupts
+	/*  Disable interrupts */
 	devpriv->stc_writew(dev, 0, Interrupt_Control_Register);
 
-	// Initialise 6143 AI specific bits
-	ni_writeb(0x00, Magic_6143);	// Set G0,G1 DMA mode to E series version
-	ni_writeb(0x80, PipelineDelay_6143);	// Set EOCMode, ADCMode and pipelinedelay
-	ni_writeb(0x00, EOC_Set_6143);	// Set EOC Delay
+	/*  Initialise 6143 AI specific bits */
+	ni_writeb(0x00, Magic_6143);	/*  Set G0,G1 DMA mode to E series version */
+	ni_writeb(0x80, PipelineDelay_6143);	/*  Set EOCMode, ADCMode and pipelinedelay */
+	ni_writeb(0x00, EOC_Set_6143);	/*  Set EOC Delay */
 
-	ni_writel(boardtype.ai_fifo_depth / 2, AIFIFO_Flag_6143);	// Set the FIFO half full level
+	ni_writel(boardtype.ai_fifo_depth / 2, AIFIFO_Flag_6143);	/*  Set the FIFO half full level */
 
-	// Strobe Relay disable bit
+	/*  Strobe Relay disable bit */
 	devpriv->ai_calib_source_enabled = 0;
 	ni_writew(devpriv->ai_calib_source | Calibration_Channel_6143_RelayOff,
 		Calibration_Channel_6143);
@@ -1597,11 +1598,11 @@ static void init_6143(struct comedi_device * dev)
 }
 
 /* cleans up allocated resources */
-static int pcimio_detach(struct comedi_device * dev)
+static int pcimio_detach(struct comedi_device *dev)
 {
 	mio_common_detach(dev);
 	if (dev->irq) {
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 	}
 	if (dev->private) {
 		mite_free_ring(devpriv->ai_mite_ring);
@@ -1616,7 +1617,7 @@ static int pcimio_detach(struct comedi_device * dev)
 	return 0;
 }
 
-static int pcimio_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int pcimio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int ret;
 
@@ -1678,9 +1679,9 @@ static int pcimio_attach(struct comedi_device * dev, struct comedi_devconfig * i
 		printk(" unknown irq (bad)\n");
 	} else {
 		printk(" ( irq = %u )", dev->irq);
-		if ((ret = comedi_request_irq(dev->irq, ni_E_interrupt,
-					NI_E_IRQ_FLAGS, DRV_NAME,
-					dev)) < 0) {
+		ret = request_irq(dev->irq, ni_E_interrupt, NI_E_IRQ_FLAGS,
+				  DRV_NAME, dev);
+		if (ret < 0) {
 			printk(" irq not available\n");
 			dev->irq = 0;
 		}
@@ -1699,7 +1700,7 @@ static int pcimio_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	return ret;
 }
 
-static int pcimio_find_device(struct comedi_device * dev, int bus, int slot)
+static int pcimio_find_device(struct comedi_device *dev, int bus, int slot)
 {
 	struct mite_struct *mite;
 	int i;
@@ -1727,7 +1728,7 @@ static int pcimio_find_device(struct comedi_device * dev, int bus, int slot)
 	return -EIO;
 }
 
-static int pcimio_ai_change(struct comedi_device * dev, struct comedi_subdevice * s,
+static int pcimio_ai_change(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned long new_size)
 {
 	int ret;
@@ -1739,7 +1740,7 @@ static int pcimio_ai_change(struct comedi_device * dev, struct comedi_subdevice
 	return 0;
 }
 
-static int pcimio_ao_change(struct comedi_device * dev, struct comedi_subdevice * s,
+static int pcimio_ao_change(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned long new_size)
 {
 	int ret;
@@ -1751,7 +1752,7 @@ static int pcimio_ao_change(struct comedi_device * dev, struct comedi_subdevice
 	return 0;
 }
 
-static int pcimio_gpct0_change(struct comedi_device * dev, struct comedi_subdevice * s,
+static int pcimio_gpct0_change(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned long new_size)
 {
 	int ret;
@@ -1763,7 +1764,7 @@ static int pcimio_gpct0_change(struct comedi_device * dev, struct comedi_subdevi
 	return 0;
 }
 
-static int pcimio_gpct1_change(struct comedi_device * dev, struct comedi_subdevice * s,
+static int pcimio_gpct1_change(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned long new_size)
 {
 	int ret;
@@ -1775,7 +1776,7 @@ static int pcimio_gpct1_change(struct comedi_device * dev, struct comedi_subdevi
 	return 0;
 }
 
-static int pcimio_dio_change(struct comedi_device * dev, struct comedi_subdevice * s,
+static int pcimio_dio_change(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned long new_size)
 {
 	int ret;
diff --git a/drivers/staging/comedi/drivers/ni_stc.h b/drivers/staging/comedi/drivers/ni_stc.h
index 1ebf521ab77..fcaedb346c4 100644
--- a/drivers/staging/comedi/drivers/ni_stc.h
+++ b/drivers/staging/comedi/drivers/ni_stc.h
@@ -262,7 +262,7 @@ enum Joint_Status_2_Bits {
 #define AO_Trigger_Once				_bit0
 
 #define AO_Mode_2_Register		39
-#define AO_FIFO_Mode_Mask ( 0x3 << 14 )
+#define AO_FIFO_Mode_Mask (0x3 << 14)
 enum AO_FIFO_Mode_Bits {
 	AO_FIFO_Mode_HF_to_F = (3 << 14),
 	AO_FIFO_Mode_F = (2 << 14),
@@ -318,7 +318,7 @@ enum Clock_and_FOUT_bits {
 };
 static inline unsigned FOUT_Divider(unsigned divider)
 {
-	return (divider & FOUT_Divider_mask);
+	return divider & FOUT_Divider_mask;
 }
 
 #define IO_Bidirection_Pin_Register	57
@@ -339,7 +339,7 @@ static inline unsigned RTSI_Output_Bit(unsigned channel, int is_mseries)
 		max_channel = 6;
 	}
 	if (channel > max_channel) {
-		rt_printk("%s: bug, invalid RTSI_channel=%i\n", __FUNCTION__,
+		printk("%s: bug, invalid RTSI_channel=%i\n", __func__,
 			channel);
 		return 0;
 	}
@@ -521,13 +521,13 @@ enum AO_Personal_Bits {
 	AO_FIFO_Flags_Polarity = 1 << 11,	/* M Series: reserved */
 	AO_TMRDACWR_Pulse_Width = 1 << 12,
 	AO_Fast_CPU = 1 << 13,	/* M Series: reserved */
-	AO_Number_Of_DAC_Packages = 1 << 14,	// 1 for "single" mode, 0 for "dual"
-	AO_Multiple_DACS_Per_Package = 1 << 15	// m-series only
+	AO_Number_Of_DAC_Packages = 1 << 14,	/*  1 for "single" mode, 0 for "dual" */
+	AO_Multiple_DACS_Per_Package = 1 << 15	/*  m-series only */
 };
 #define	RTSI_Trig_A_Output_Register	79
 #define	RTSI_Trig_B_Output_Register	80
 enum RTSI_Trig_B_Output_Bits {
-	RTSI_Sub_Selection_1_Bit = 0x8000	// not for m-series
+	RTSI_Sub_Selection_1_Bit = 0x8000	/*  not for m-series */
 };
 static inline unsigned RTSI_Trig_Output_Bits(unsigned rtsi_channel,
 	unsigned source)
@@ -539,7 +539,7 @@ static inline unsigned RTSI_Trig_Output_Mask(unsigned rtsi_channel)
 	return 0xf << ((rtsi_channel % 4) * 4);
 };
 
-// inverse to RTSI_Trig_Output_Bits()
+/* inverse to RTSI_Trig_Output_Bits() */
 static inline unsigned RTSI_Trig_Output_Source(unsigned rtsi_channel,
 	unsigned bits)
 {
@@ -759,7 +759,7 @@ enum Configuration_Memory_High_Bits {
 };
 static inline unsigned int AI_CONFIG_CHANNEL(unsigned int channel)
 {
-	return (channel & 0x3f);
+	return channel & 0x3f;
 }
 
 #define ADC_FIFO_Data_Register		0x1c
@@ -920,42 +920,42 @@ enum ni_reg_type {
 static const struct comedi_lrange range_ni_E_ao_ext;
 
 enum m_series_register_offsets {
-	M_Offset_CDIO_DMA_Select = 0x7,	// write
-	M_Offset_SCXI_Status = 0x7,	// read
-	M_Offset_AI_AO_Select = 0x9,	// write, same offset as e-series
-	M_Offset_SCXI_Serial_Data_In = 0x9,	// read
-	M_Offset_G0_G1_Select = 0xb,	// write, same offset as e-series
+	M_Offset_CDIO_DMA_Select = 0x7,	/*  write */
+	M_Offset_SCXI_Status = 0x7,	/*  read */
+	M_Offset_AI_AO_Select = 0x9,	/*  write, same offset as e-series */
+	M_Offset_SCXI_Serial_Data_In = 0x9,	/*  read */
+	M_Offset_G0_G1_Select = 0xb,	/*  write, same offset as e-series */
 	M_Offset_Misc_Command = 0xf,
 	M_Offset_SCXI_Serial_Data_Out = 0x11,
 	M_Offset_SCXI_Control = 0x13,
 	M_Offset_SCXI_Output_Enable = 0x15,
 	M_Offset_AI_FIFO_Data = 0x1c,
-	M_Offset_Static_Digital_Output = 0x24,	// write
-	M_Offset_Static_Digital_Input = 0x24,	// read
+	M_Offset_Static_Digital_Output = 0x24,	/*  write */
+	M_Offset_Static_Digital_Input = 0x24,	/*  read */
 	M_Offset_DIO_Direction = 0x28,
 	M_Offset_Cal_PWM = 0x40,
 	M_Offset_AI_Config_FIFO_Data = 0x5e,
-	M_Offset_Interrupt_C_Enable = 0x88,	// write
-	M_Offset_Interrupt_C_Status = 0x88,	// read
+	M_Offset_Interrupt_C_Enable = 0x88,	/*  write */
+	M_Offset_Interrupt_C_Status = 0x88,	/*  read */
 	M_Offset_Analog_Trigger_Control = 0x8c,
 	M_Offset_AO_Serial_Interrupt_Enable = 0xa0,
-	M_Offset_AO_Serial_Interrupt_Ack = 0xa1,	// write
-	M_Offset_AO_Serial_Interrupt_Status = 0xa1,	// read
+	M_Offset_AO_Serial_Interrupt_Ack = 0xa1,	/*  write */
+	M_Offset_AO_Serial_Interrupt_Status = 0xa1,	/*  read */
 	M_Offset_AO_Calibration = 0xa3,
 	M_Offset_AO_FIFO_Data = 0xa4,
 	M_Offset_PFI_Filter = 0xb0,
 	M_Offset_RTSI_Filter = 0xb4,
 	M_Offset_SCXI_Legacy_Compatibility = 0xbc,
-	M_Offset_Interrupt_A_Ack = 0x104,	// write
-	M_Offset_AI_Status_1 = 0x104,	// read
-	M_Offset_Interrupt_B_Ack = 0x106,	// write
-	M_Offset_AO_Status_1 = 0x106,	// read
-	M_Offset_AI_Command_2 = 0x108,	// write
-	M_Offset_G01_Status = 0x108,	// read
+	M_Offset_Interrupt_A_Ack = 0x104,	/*  write */
+	M_Offset_AI_Status_1 = 0x104,	/*  read */
+	M_Offset_Interrupt_B_Ack = 0x106,	/*  write */
+	M_Offset_AO_Status_1 = 0x106,	/*  read */
+	M_Offset_AI_Command_2 = 0x108,	/*  write */
+	M_Offset_G01_Status = 0x108,	/*  read */
 	M_Offset_AO_Command_2 = 0x10a,
-	M_Offset_AO_Status_2 = 0x10c,	// read
-	M_Offset_G0_Command = 0x10c,	// write
-	M_Offset_G1_Command = 0x10e,	// write
+	M_Offset_AO_Status_2 = 0x10c,	/*  read */
+	M_Offset_G0_Command = 0x10c,	/*  write */
+	M_Offset_G1_Command = 0x10e,	/*  write */
 	M_Offset_G0_HW_Save = 0x110,
 	M_Offset_G0_HW_Save_High = 0x110,
 	M_Offset_AI_Command_1 = 0x110,
@@ -973,17 +973,17 @@ enum m_series_register_offsets {
 	M_Offset_G1_Save = 0x11c,
 	M_Offset_G1_Save_High = 0x11c,
 	M_Offset_G1_Save_Low = 0x11e,
-	M_Offset_AI_SI_Load_B = 0x120,	// write
-	M_Offset_AO_UI_Save = 0x120,	// read
-	M_Offset_AI_SC_Load_A = 0x124,	// write
-	M_Offset_AO_BC_Save = 0x124,	// read
-	M_Offset_AI_SC_Load_B = 0x128,	// write
-	M_Offset_AO_UC_Save = 0x128,	//read
+	M_Offset_AI_SI_Load_B = 0x120,	/*  write */
+	M_Offset_AO_UI_Save = 0x120,	/*  read */
+	M_Offset_AI_SC_Load_A = 0x124,	/*  write */
+	M_Offset_AO_BC_Save = 0x124,	/*  read */
+	M_Offset_AI_SC_Load_B = 0x128,	/*  write */
+	M_Offset_AO_UC_Save = 0x128,	/* read */
 	M_Offset_AI_SI2_Load_A = 0x12c,
 	M_Offset_AI_SI2_Load_B = 0x130,
 	M_Offset_G0_Mode = 0x134,
-	M_Offset_G1_Mode = 0x136,	// write
-	M_Offset_Joint_Status_1 = 0x136,	// read
+	M_Offset_G1_Mode = 0x136,	/*  write */
+	M_Offset_Joint_Status_1 = 0x136,	/*  read */
 	M_Offset_G0_Load_A = 0x138,
 	M_Offset_Joint_Status_2 = 0x13a,
 	M_Offset_G0_Load_B = 0x13c,
@@ -1007,10 +1007,10 @@ enum m_series_register_offsets {
 	M_Offset_Analog_Trigger_Etc = 0x17a,
 	M_Offset_AI_START_STOP_Select = 0x17c,
 	M_Offset_AI_Trigger_Select = 0x17e,
-	M_Offset_AI_SI_Save = 0x180,	// read
-	M_Offset_AI_DIV_Load_A = 0x180,	// write
-	M_Offset_AI_SC_Save = 0x184,	// read
-	M_Offset_AO_Start_Select = 0x184,	// write
+	M_Offset_AI_SI_Save = 0x180,	/*  read */
+	M_Offset_AI_DIV_Load_A = 0x180,	/*  write */
+	M_Offset_AI_SC_Save = 0x184,	/*  read */
+	M_Offset_AO_Start_Select = 0x184,	/*  write */
 	M_Offset_AO_Trigger_Select = 0x186,
 	M_Offset_AO_Mode_3 = 0x18c,
 	M_Offset_G0_Autoincrement = 0x188,
@@ -1032,10 +1032,10 @@ enum m_series_register_offsets {
 	M_Offset_G1_Counting_Mode = 0x1b2,
 	M_Offset_G0_Second_Gate = 0x1b4,
 	M_Offset_G1_Second_Gate = 0x1b6,
-	M_Offset_G0_DMA_Config = 0x1b8,	// write
-	M_Offset_G0_DMA_Status = 0x1b8,	// read
-	M_Offset_G1_DMA_Config = 0x1ba,	// write
-	M_Offset_G1_DMA_Status = 0x1ba,	// read
+	M_Offset_G0_DMA_Config = 0x1b8,	/*  write */
+	M_Offset_G0_DMA_Status = 0x1b8,	/*  read */
+	M_Offset_G1_DMA_Config = 0x1ba,	/*  write */
+	M_Offset_G1_DMA_Status = 0x1ba,	/*  read */
 	M_Offset_G0_MSeries_ABZ = 0x1c0,
 	M_Offset_G1_MSeries_ABZ = 0x1c2,
 	M_Offset_Clock_and_Fout2 = 0x1c4,
@@ -1051,10 +1051,10 @@ enum m_series_register_offsets {
 	M_Offset_PFI_DO = 0x1de,
 	M_Offset_AI_Config_FIFO_Bypass = 0x218,
 	M_Offset_SCXI_DIO_Enable = 0x21c,
-	M_Offset_CDI_FIFO_Data = 0x220,	// read
-	M_Offset_CDO_FIFO_Data = 0x220,	// write
-	M_Offset_CDIO_Status = 0x224,	// read
-	M_Offset_CDIO_Command = 0x224,	// write
+	M_Offset_CDI_FIFO_Data = 0x220,	/*  read */
+	M_Offset_CDO_FIFO_Data = 0x220,	/*  write */
+	M_Offset_CDIO_Status = 0x224,	/*  read */
+	M_Offset_CDIO_Command = 0x224,	/*  write */
 	M_Offset_CDI_Mode = 0x228,
 	M_Offset_CDO_Mode = 0x22c,
 	M_Offset_CDI_Mask_Enable = 0x230,
@@ -1084,8 +1084,8 @@ static inline int M_Offset_Static_AI_Control(int i)
 		0x262,
 		0x263,
 	};
-	if (((unsigned)i) >= sizeof(offset) / sizeof(offset[0])) {
-		rt_printk("%s: invalid channel=%i\n", __FUNCTION__, i);
+	if (((unsigned)i) >= ARRAY_SIZE(offset)) {
+		printk("%s: invalid channel=%i\n", __func__, i);
 		return offset[0];
 	}
 	return offset[i];
@@ -1098,8 +1098,8 @@ static inline int M_Offset_AO_Reference_Attenuation(int channel)
 		0x266,
 		0x267
 	};
-	if (((unsigned)channel) >= sizeof(offset) / sizeof(offset[0])) {
-		rt_printk("%s: invalid channel=%i\n", __FUNCTION__, channel);
+	if (((unsigned)channel) >= ARRAY_SIZE(offset)) {
+		printk("%s: invalid channel=%i\n", __func__, channel);
 		return offset[0];
 	}
 	return offset[channel];
@@ -1107,8 +1107,8 @@ static inline int M_Offset_AO_Reference_Attenuation(int channel)
 static inline unsigned M_Offset_PFI_Output_Select(unsigned n)
 {
 	if (n < 1 || n > NUM_PFI_OUTPUT_SELECT_REGS) {
-		rt_printk("%s: invalid pfi output select register=%i\n",
-			__FUNCTION__, n);
+		printk("%s: invalid pfi output select register=%i\n",
+			__func__, n);
 		return M_Offset_PFI_Output_Select_1;
 	}
 	return M_Offset_PFI_Output_Select_1 + (n - 1) * 2;
@@ -1122,7 +1122,7 @@ enum MSeries_AI_Config_FIFO_Data_Bits {
 	MSeries_AI_Config_Channel_Type_Ground_Ref_Bits = 0x3 << 6,
 	MSeries_AI_Config_Channel_Type_Aux_Bits = 0x5 << 6,
 	MSeries_AI_Config_Channel_Type_Ghost_Bits = 0x7 << 6,
-	MSeries_AI_Config_Polarity_Bit = 0x1000,	// 0 for 2's complement encoding
+	MSeries_AI_Config_Polarity_Bit = 0x1000,	/*  0 for 2's complement encoding */
 	MSeries_AI_Config_Dither_Bit = 0x2000,
 	MSeries_AI_Config_Last_Channel_Bit = 0x4000,
 };
@@ -1151,8 +1151,8 @@ enum MSeries_Clock_and_Fout2_Bits {
 	MSeries_PLL_In_Source_Select_RTSI7_Bits = 0x1b,
 	MSeries_PLL_In_Source_Select_PXI_Clock10 = 0x1d,
 	MSeries_PLL_In_Source_Select_Mask = 0x1f,
-	MSeries_Timebase1_Select_Bit = 0x20,	// use PLL for timebase 1
-	MSeries_Timebase3_Select_Bit = 0x40,	// use PLL for timebase 3
+	MSeries_Timebase1_Select_Bit = 0x20,	/*  use PLL for timebase 1 */
+	MSeries_Timebase3_Select_Bit = 0x40,	/*  use PLL for timebase 3 */
 	/* use 10MHz instead of 20MHz for RTSI clock frequency.  Appears
 	   to have no effect, at least on pxi-6281, which always uses
 	   20MHz rtsi clock frequency */
@@ -1162,7 +1162,7 @@ static inline unsigned MSeries_PLL_In_Source_Select_RTSI_Bits(unsigned
 	RTSI_channel)
 {
 	if (RTSI_channel > 7) {
-		rt_printk("%s: bug, invalid RTSI_channel=%i\n", __FUNCTION__,
+		printk("%s: bug, invalid RTSI_channel=%i\n", __func__,
 			RTSI_channel);
 		return 0;
 	}
@@ -1183,7 +1183,7 @@ static inline unsigned MSeries_PLL_Divisor_Bits(unsigned divisor)
 {
 	static const unsigned max_divisor = 0x10;
 	if (divisor < 1 || divisor > max_divisor) {
-		rt_printk("%s: bug, invalid divisor=%i\n", __FUNCTION__,
+		printk("%s: bug, invalid divisor=%i\n", __func__,
 			divisor);
 		return 0;
 	}
@@ -1193,7 +1193,7 @@ static inline unsigned MSeries_PLL_Multiplier_Bits(unsigned multiplier)
 {
 	static const unsigned max_multiplier = 0x100;
 	if (multiplier < 1 || multiplier > max_multiplier) {
-		rt_printk("%s: bug, invalid multiplier=%i\n", __FUNCTION__,
+		printk("%s: bug, invalid multiplier=%i\n", __func__,
 			multiplier);
 		return 0;
 	}
@@ -1213,7 +1213,7 @@ enum MSeries_AI_Config_FIFO_Bypass_Bits {
 	MSeries_AO_Bypass_AO_Cal_Sel_Mask = 0x38000,
 	MSeries_AI_Bypass_Gain_Mask = 0x1c0000,
 	MSeries_AI_Bypass_Dither_Bit = 0x200000,
-	MSeries_AI_Bypass_Polarity_Bit = 0x400000,	// 0 for 2's complement encoding
+	MSeries_AI_Bypass_Polarity_Bit = 0x400000,	/*  0 for 2's complement encoding */
 	MSeries_AI_Bypass_Config_FIFO_Bit = 0x80000000
 };
 static inline unsigned MSeries_AI_Bypass_Cal_Sel_Pos_Bits(int
@@ -1239,7 +1239,7 @@ enum MSeries_AO_Config_Bank_Bits {
 	MSeries_AO_DAC_Reference_10V_Internal_Bits = 0x0,
 	MSeries_AO_DAC_Reference_5V_Internal_Bits = 0x8,
 	MSeries_AO_Update_Timed_Bit = 0x40,
-	MSeries_AO_Bipolar_Bit = 0x80	// turns on 2's complement encoding
+	MSeries_AO_Bipolar_Bit = 0x80	/*  turns on 2's complement encoding */
 };
 
 enum MSeries_AO_Reference_Attenuation_Bits {
@@ -1266,7 +1266,7 @@ static inline unsigned MSeries_PFI_Output_Select_Bits(unsigned channel,
 	return (source & 0x1f) << ((channel % 3) * 5);
 };
 
-// inverse to MSeries_PFI_Output_Select_Bits
+/* inverse to MSeries_PFI_Output_Select_Bits */
 static inline unsigned MSeries_PFI_Output_Select_Source(unsigned channel,
 	unsigned bits)
 {
@@ -1338,9 +1338,9 @@ enum CDIO_Command_Bits {
 enum CDI_Mode_Bits {
 	CDI_Sample_Source_Select_Mask = 0x3f,
 	CDI_Halt_On_Error_Bit = 0x200,
-	CDI_Polarity_Bit = 0x400,	// sample clock on falling edge
-	CDI_FIFO_Mode_Bit = 0x800,	// set for half full mode, clear for not empty mode
-	CDI_Data_Lane_Mask = 0x3000,	// data lanes specify which dio channels map to byte or word accesses to the dio fifos
+	CDI_Polarity_Bit = 0x400,	/*  sample clock on falling edge */
+	CDI_FIFO_Mode_Bit = 0x800,	/*  set for half full mode, clear for not empty mode */
+	CDI_Data_Lane_Mask = 0x3000,	/*  data lanes specify which dio channels map to byte or word accesses to the dio fifos */
 	CDI_Data_Lane_0_15_Bits = 0x0,
 	CDI_Data_Lane_16_31_Bits = 0x1000,
 	CDI_Data_Lane_0_7_Bits = 0x0,
@@ -1353,9 +1353,9 @@ enum CDO_Mode_Bits {
 	CDO_Sample_Source_Select_Mask = 0x3f,
 	CDO_Retransmit_Bit = 0x100,
 	CDO_Halt_On_Error_Bit = 0x200,
-	CDO_Polarity_Bit = 0x400,	// sample clock on falling edge
-	CDO_FIFO_Mode_Bit = 0x800,	// set for half full mode, clear for not full mode
-	CDO_Data_Lane_Mask = 0x3000,	// data lanes specify which dio channels map to byte or word accesses to the dio fifos
+	CDO_Polarity_Bit = 0x400,	/*  sample clock on falling edge */
+	CDO_FIFO_Mode_Bit = 0x800,	/*  set for half full mode, clear for not full mode */
+	CDO_Data_Lane_Mask = 0x3000,	/*  data lanes specify which dio channels map to byte or word accesses to the dio fifos */
 	CDO_Data_Lane_0_15_Bits = 0x0,
 	CDO_Data_Lane_16_31_Bits = 0x1000,
 	CDO_Data_Lane_0_7_Bits = 0x0,
@@ -1374,7 +1374,7 @@ enum Interrupt_C_Status_Bits {
 
 #define M_SERIES_EEPROM_SIZE 1024
 
-typedef struct ni_board_struct {
+struct ni_board_struct {
 	int device_id;
 	int isapnp_id;
 	char *name;
@@ -1401,11 +1401,11 @@ typedef struct ni_board_struct {
 	unsigned int has_analog_trig:1;
 
 	enum caldac_enum caldac[3];
-} ni_board;
+};
 
-#define n_ni_boards  (sizeof(ni_boards)/sizeof(ni_board))
+#define n_ni_boards  (sizeof(ni_boards)/sizeof(struct ni_board_struct))
 
-#define boardtype (*(ni_board *)dev->board_ptr)
+#define boardtype (*(struct ni_board_struct *)dev->board_ptr)
 
 #define MAX_N_AO_CHAN 8
 #define NUM_GPCT 2
@@ -1418,7 +1418,7 @@ typedef struct ni_board_struct {
 	\
 	unsigned short dio_output;				\
 	unsigned short dio_control;				\
-	int ao0p,ao1p;						\
+	int ao0p, ao1p;						\
 	int lastchan;						\
 	int last_do;						\
 	int rt_irq;						\
diff --git a/drivers/staging/comedi/drivers/ni_tio.c b/drivers/staging/comedi/drivers/ni_tio.c
index 05a95754039..785553d0cc9 100644
--- a/drivers/staging/comedi/drivers/ni_tio.c
+++ b/drivers/staging/comedi/drivers/ni_tio.c
@@ -149,13 +149,13 @@ static const unsigned ni_660x_max_rtsi_channel = 6;
 static inline unsigned NI_660x_RTSI_Clock(unsigned n)
 {
 	BUG_ON(n > ni_660x_max_rtsi_channel);
-	return (0xb + n);
+	return 0xb + n;
 }
 static const unsigned ni_660x_max_source_pin = 7;
 static inline unsigned NI_660x_Source_Pin_Clock(unsigned n)
 {
 	BUG_ON(n > ni_660x_max_source_pin);
-	return (0x2 + n);
+	return 0x2 + n;
 }
 
 /* clock sources for ni e and m series boards, get bits with Gi_Source_Select_Bits() */
@@ -279,9 +279,9 @@ static void __exit ni_tio_cleanup_module(void)
 module_exit(ni_tio_cleanup_module);
 
 struct ni_gpct_device *ni_gpct_device_construct(struct comedi_device * dev,
-	void (*write_register) (struct ni_gpct * counter, unsigned bits,
+	void (*write_register) (struct ni_gpct *counter, unsigned bits,
 		enum ni_gpct_register reg),
-	unsigned (*read_register) (struct ni_gpct * counter,
+	unsigned (*read_register) (struct ni_gpct *counter,
 		enum ni_gpct_register reg), enum ni_gpct_variant variant,
 	unsigned num_counters)
 {
@@ -669,7 +669,7 @@ static unsigned ni_m_series_source_select_bits(unsigned int clock_source)
 		}
 		if (i <= ni_m_series_max_pfi_channel)
 			break;
-		rt_printk("invalid clock source 0x%lx\n",
+		printk("invalid clock source 0x%lx\n",
 			(unsigned long)clock_source);
 		BUG();
 		ni_m_series_clock = 0;
@@ -965,7 +965,7 @@ static uint64_t ni_tio_clock_period_ps(const struct ni_gpct *counter,
 }
 
 static void ni_tio_get_clock_src(struct ni_gpct *counter,
-	unsigned int * clock_source, unsigned int * period_ns)
+	unsigned int *clock_source, unsigned int *period_ns)
 {
 	static const unsigned pico_per_nano = 1000;
 	uint64_t temp64;
@@ -1273,7 +1273,7 @@ static int ni_tio_set_other_src(struct ni_gpct *counter, unsigned index,
 		counter_dev->regs[abz_reg] &= ~mask;
 		counter_dev->regs[abz_reg] |= (source << shift) & mask;
 		write_register(counter, counter_dev->regs[abz_reg], abz_reg);
-//              rt_printk("%s %x %d %d\n", __FUNCTION__, counter_dev->regs[abz_reg], index, source);
+/* printk("%s %x %d %d\n", __func__, counter_dev->regs[abz_reg], index, source); */
 		return 0;
 	}
 	return -EINVAL;
@@ -1442,7 +1442,7 @@ static unsigned ni_m_series_second_gate_to_generic_gate_source(unsigned
 };
 
 static int ni_tio_get_gate_src(struct ni_gpct *counter, unsigned gate_index,
-	unsigned int * gate_source)
+	unsigned int *gate_source)
 {
 	struct ni_gpct_device *counter_dev = counter->counter_dev;
 	const unsigned mode_bits = ni_tio_get_soft_copy(counter,
@@ -1534,7 +1534,7 @@ static int ni_tio_get_gate_src(struct ni_gpct *counter, unsigned gate_index,
 }
 
 int ni_tio_insn_config(struct ni_gpct *counter,
-	struct comedi_insn * insn, unsigned int * data)
+	struct comedi_insn *insn, unsigned int *data)
 {
 	switch (data[0]) {
 	case INSN_CONFIG_SET_COUNTER_MODE:
diff --git a/drivers/staging/comedi/drivers/ni_tio.h b/drivers/staging/comedi/drivers/ni_tio.h
index 0729d60b01c..3aacfe2f242 100644
--- a/drivers/staging/comedi/drivers/ni_tio.h
+++ b/drivers/staging/comedi/drivers/ni_tio.h
@@ -25,7 +25,7 @@
 
 #include "../comedidev.h"
 
-// forward declarations
+/* forward declarations */
 struct mite_struct;
 struct ni_gpct_device;
 
@@ -120,9 +120,9 @@ struct ni_gpct {
 
 struct ni_gpct_device {
 	struct comedi_device *dev;
-	void (*write_register) (struct ni_gpct * counter, unsigned bits,
+	void (*write_register) (struct ni_gpct *counter, unsigned bits,
 		enum ni_gpct_register reg);
-	unsigned (*read_register) (struct ni_gpct * counter,
+	unsigned (*read_register) (struct ni_gpct *counter,
 		enum ni_gpct_register reg);
 	enum ni_gpct_variant variant;
 	struct ni_gpct *counters;
@@ -132,24 +132,24 @@ struct ni_gpct_device {
 };
 
 extern struct ni_gpct_device *ni_gpct_device_construct(struct comedi_device * dev,
-	void (*write_register) (struct ni_gpct * counter, unsigned bits,
+	void (*write_register) (struct ni_gpct *counter, unsigned bits,
 		enum ni_gpct_register reg),
-	unsigned (*read_register) (struct ni_gpct * counter,
+	unsigned (*read_register) (struct ni_gpct *counter,
 		enum ni_gpct_register reg), enum ni_gpct_variant variant,
 	unsigned num_counters);
 extern void ni_gpct_device_destroy(struct ni_gpct_device *counter_dev);
 extern void ni_tio_init_counter(struct ni_gpct *counter);
 extern int ni_tio_rinsn(struct ni_gpct *counter,
-	struct comedi_insn * insn, unsigned int * data);
+	struct comedi_insn *insn, unsigned int *data);
 extern int ni_tio_insn_config(struct ni_gpct *counter,
-	struct comedi_insn * insn, unsigned int * data);
+	struct comedi_insn *insn, unsigned int *data);
 extern int ni_tio_winsn(struct ni_gpct *counter,
-	struct comedi_insn * insn, unsigned int * data);
+	struct comedi_insn *insn, unsigned int *data);
 extern int ni_tio_cmd(struct ni_gpct *counter, struct comedi_async *async);
 extern int ni_tio_cmdtest(struct ni_gpct *counter, struct comedi_cmd * cmd);
 extern int ni_tio_cancel(struct ni_gpct *counter);
 extern void ni_tio_handle_interrupt(struct ni_gpct *counter,
-	struct comedi_subdevice * s);
+	struct comedi_subdevice *s);
 extern void ni_tio_set_mite_channel(struct ni_gpct *counter,
 	struct mite_channel *mite_chan);
 extern void ni_tio_acknowledge_and_confirm(struct ni_gpct *counter,
diff --git a/drivers/staging/comedi/drivers/ni_tio_internal.h b/drivers/staging/comedi/drivers/ni_tio_internal.h
index ac5b171cbe1..920dd221da0 100644
--- a/drivers/staging/comedi/drivers/ni_tio_internal.h
+++ b/drivers/staging/comedi/drivers/ni_tio_internal.h
@@ -487,8 +487,8 @@ enum Gi_Counting_Mode_Reg_Bits {
 #define Gi_Source_Select_Shift 2
 #define Gi_Gate_Select_Shift 7
 enum Gi_Input_Select_Bits {
-	Gi_Read_Acknowledges_Irq = 0x1,	// not present on 660x
-	Gi_Write_Acknowledges_Irq = 0x2,	// not present on 660x
+	Gi_Read_Acknowledges_Irq = 0x1,	/*  not present on 660x */
+	Gi_Write_Acknowledges_Irq = 0x2,	/*  not present on 660x */
 	Gi_Source_Select_Mask = 0x7c,
 	Gi_Gate_Select_Mask = 0x1f << Gi_Gate_Select_Shift,
 	Gi_Gate_Select_Load_Source_Bit = 0x1000,
@@ -656,7 +656,7 @@ static inline unsigned Gi_TC_Error_Confirm_Bit(unsigned counter_index)
 	return G0_TC_Error_Confirm_Bit;
 }
 
-// bits that are the same in G0/G2 and G1/G3 interrupt acknowledge registers
+/* bits that are the same in G0/G2 and G1/G3 interrupt acknowledge registers */
 enum Gxx_Interrupt_Acknowledge_Bits {
 	Gi_TC_Interrupt_Ack_Bit = 0x4000,
 	Gi_Gate_Interrupt_Ack_Bit = 0x8000
@@ -728,14 +728,14 @@ static inline void ni_tio_set_bits_transient(struct ni_gpct *counter,
 	unsigned long flags;
 
 	BUG_ON(register_index >= NITIO_Num_Registers);
-	comedi_spin_lock_irqsave(&counter_dev->regs_lock, flags);
+	spin_lock_irqsave(&counter_dev->regs_lock, flags);
 	counter_dev->regs[register_index] &= ~bit_mask;
 	counter_dev->regs[register_index] |= (bit_values & bit_mask);
 	write_register(counter,
 		counter_dev->regs[register_index] | transient_bit_values,
 		register_index);
 	mmiowb();
-	comedi_spin_unlock_irqrestore(&counter_dev->regs_lock, flags);
+	spin_unlock_irqrestore(&counter_dev->regs_lock, flags);
 }
 
 /* ni_tio_set_bits( ) is for safely writing to registers whose bits may be
@@ -761,9 +761,9 @@ static inline unsigned ni_tio_get_soft_copy(const struct ni_gpct *counter,
 	unsigned value;
 
 	BUG_ON(register_index >= NITIO_Num_Registers);
-	comedi_spin_lock_irqsave(&counter_dev->regs_lock, flags);
+	spin_lock_irqsave(&counter_dev->regs_lock, flags);
 	value = counter_dev->regs[register_index];
-	comedi_spin_unlock_irqrestore(&counter_dev->regs_lock, flags);
+	spin_unlock_irqrestore(&counter_dev->regs_lock, flags);
 	return value;
 }
 
diff --git a/drivers/staging/comedi/drivers/ni_tiocmd.c b/drivers/staging/comedi/drivers/ni_tiocmd.c
index 16a26e73c99..5be1e1a62c0 100644
--- a/drivers/staging/comedi/drivers/ni_tiocmd.c
+++ b/drivers/staging/comedi/drivers/ni_tiocmd.c
@@ -96,7 +96,7 @@ static void ni_tio_configure_dma(struct ni_gpct *counter, short enable,
 	}
 }
 
-static int ni_tio_input_inttrig(struct comedi_device * dev, struct comedi_subdevice * s,
+static int ni_tio_input_inttrig(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int trignum)
 {
 	unsigned long flags;
@@ -107,12 +107,12 @@ static int ni_tio_input_inttrig(struct comedi_device * dev, struct comedi_subdev
 	if (trignum != 0)
 		return -EINVAL;
 
-	comedi_spin_lock_irqsave(&counter->lock, flags);
+	spin_lock_irqsave(&counter->lock, flags);
 	if (counter->mite_chan)
 		mite_dma_arm(counter->mite_chan);
 	else
 		retval = -EIO;
-	comedi_spin_unlock_irqrestore(&counter->lock, flags);
+	spin_unlock_irqrestore(&counter->lock, flags);
 	if (retval < 0)
 		return retval;
 	retval = ni_tio_arm(counter, 1, NI_GPCT_ARM_IMMEDIATE);
@@ -171,7 +171,7 @@ static int ni_tio_input_cmd(struct ni_gpct *counter, struct comedi_async *async)
 
 static int ni_tio_output_cmd(struct ni_gpct *counter, struct comedi_async *async)
 {
-	rt_printk("ni_tio: output commands not yet implemented.\n");
+	printk("ni_tio: output commands not yet implemented.\n");
 	return -ENOTSUPP;
 
 	counter->mite_chan->dir = COMEDI_OUTPUT;
@@ -213,9 +213,9 @@ int ni_tio_cmd(struct ni_gpct *counter, struct comedi_async *async)
 	int retval = 0;
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&counter->lock, flags);
+	spin_lock_irqsave(&counter->lock, flags);
 	if (counter->mite_chan == NULL) {
-		rt_printk
+		printk
 			("ni_tio: commands only supported with DMA.  Interrupt-driven commands not yet implemented.\n");
 		retval = -EIO;
 	} else {
@@ -228,7 +228,7 @@ int ni_tio_cmd(struct ni_gpct *counter, struct comedi_async *async)
 			}
 		}
 	}
-	comedi_spin_unlock_irqrestore(&counter->lock, flags);
+	spin_unlock_irqrestore(&counter->lock, flags);
 	return retval;
 }
 
@@ -342,11 +342,11 @@ int ni_tio_cancel(struct ni_gpct *counter)
 	unsigned long flags;
 
 	ni_tio_arm(counter, 0, 0);
-	comedi_spin_lock_irqsave(&counter->lock, flags);
+	spin_lock_irqsave(&counter->lock, flags);
 	if (counter->mite_chan) {
 		mite_dma_disarm(counter->mite_chan);
 	}
-	comedi_spin_unlock_irqrestore(&counter->lock, flags);
+	spin_unlock_irqrestore(&counter->lock, flags);
 	ni_tio_configure_dma(counter, 0, 0);
 
 	ni_tio_set_bits(counter,
@@ -365,11 +365,11 @@ static int should_ack_gate(struct ni_gpct *counter)
 
 	switch (counter->counter_dev->variant) {
 	case ni_gpct_variant_m_series:
-	case ni_gpct_variant_660x:	// not sure if 660x really supports gate interrupts (the bits are not listed in register-level manual)
+	case ni_gpct_variant_660x:	/*  not sure if 660x really supports gate interrupts (the bits are not listed in register-level manual) */
 		return 1;
 		break;
 	case ni_gpct_variant_e_series:
-		comedi_spin_lock_irqsave(&counter->lock, flags);
+		spin_lock_irqsave(&counter->lock, flags);
 		{
 			if (counter->mite_chan == NULL ||
 				counter->mite_chan->dir != COMEDI_INPUT ||
@@ -377,7 +377,7 @@ static int should_ack_gate(struct ni_gpct *counter)
 				retval = 1;
 			}
 		}
-		comedi_spin_unlock_irqrestore(&counter->lock, flags);
+		spin_unlock_irqrestore(&counter->lock, flags);
 		break;
 	}
 	return retval;
@@ -439,7 +439,7 @@ void ni_tio_acknowledge_and_confirm(struct ni_gpct *counter, int *gate_error,
 				NITIO_Gxx_Joint_Status2_Reg(counter->
 					counter_index)) &
 			Gi_Permanent_Stale_Bit(counter->counter_index)) {
-			rt_printk("%s: Gi_Permanent_Stale_Data detected.\n",
+			printk("%s: Gi_Permanent_Stale_Data detected.\n",
 				__FUNCTION__);
 			if (perm_stale_data)
 				*perm_stale_data = 1;
@@ -458,7 +458,7 @@ void ni_tio_handle_interrupt(struct ni_gpct *counter, struct comedi_subdevice *
 	ni_tio_acknowledge_and_confirm(counter, &gate_error, &tc_error,
 		&perm_stale_data, NULL);
 	if (gate_error) {
-		rt_printk("%s: Gi_Gate_Error detected.\n", __FUNCTION__);
+		printk("%s: Gi_Gate_Error detected.\n", __FUNCTION__);
 		s->async->events |= COMEDI_CB_OVERFLOW;
 	}
 	if (perm_stale_data) {
@@ -470,16 +470,16 @@ void ni_tio_handle_interrupt(struct ni_gpct *counter, struct comedi_subdevice *
 		if (read_register(counter,
 				NITIO_Gi_DMA_Status_Reg(counter->
 					counter_index)) & Gi_DRQ_Error_Bit) {
-			rt_printk("%s: Gi_DRQ_Error detected.\n", __FUNCTION__);
+			printk("%s: Gi_DRQ_Error detected.\n", __FUNCTION__);
 			s->async->events |= COMEDI_CB_OVERFLOW;
 		}
 		break;
 	case ni_gpct_variant_e_series:
 		break;
 	}
-	comedi_spin_lock_irqsave(&counter->lock, flags);
+	spin_lock_irqsave(&counter->lock, flags);
 	if (counter->mite_chan == NULL) {
-		comedi_spin_unlock_irqrestore(&counter->lock, flags);
+		spin_unlock_irqrestore(&counter->lock, flags);
 		return;
 	}
 	gpct_mite_status = mite_get_status(counter->mite_chan);
@@ -489,7 +489,7 @@ void ni_tio_handle_interrupt(struct ni_gpct *counter, struct comedi_subdevice *
 			MITE_CHOR(counter->mite_chan->channel));
 	}
 	mite_sync_input_dma(counter->mite_chan, s->async);
-	comedi_spin_unlock_irqrestore(&counter->lock, flags);
+	spin_unlock_irqrestore(&counter->lock, flags);
 }
 
 void ni_tio_set_mite_channel(struct ni_gpct *counter,
@@ -497,9 +497,9 @@ void ni_tio_set_mite_channel(struct ni_gpct *counter,
 {
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&counter->lock, flags);
+	spin_lock_irqsave(&counter->lock, flags);
 	counter->mite_chan = mite_chan;
-	comedi_spin_unlock_irqrestore(&counter->lock, flags);
+	spin_unlock_irqrestore(&counter->lock, flags);
 }
 
 static int __init ni_tiocmd_init_module(void)
diff --git a/drivers/staging/comedi/drivers/pcl711.c b/drivers/staging/comedi/drivers/pcl711.c
index ce42506d47b..7b72b7af75c 100644
--- a/drivers/staging/comedi/drivers/pcl711.c
+++ b/drivers/staging/comedi/drivers/pcl711.c
@@ -58,6 +58,7 @@ supported.
 
  */
 
+#include <linux/interrupt.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
@@ -156,16 +157,16 @@ static const struct pcl711_board boardtypes[] = {
 #define n_boardtypes (sizeof(boardtypes)/sizeof(struct pcl711_board))
 #define this_board ((const struct pcl711_board *)dev->board_ptr)
 
-static int pcl711_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int pcl711_detach(struct comedi_device * dev);
+static int pcl711_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int pcl711_detach(struct comedi_device *dev);
 static struct comedi_driver driver_pcl711 = {
-      driver_name:"pcl711",
-      module:THIS_MODULE,
-      attach:pcl711_attach,
-      detach:pcl711_detach,
-      board_name:&boardtypes[0].name,
-      num_names:n_boardtypes,
-      offset:sizeof(struct pcl711_board),
+	.driver_name = "pcl711",
+	.module = THIS_MODULE,
+	.attach = pcl711_attach,
+	.detach = pcl711_detach,
+	.board_name = &boardtypes[0].name,
+	.num_names = n_boardtypes,
+	.offset = sizeof(struct pcl711_board),
 };
 
 COMEDI_INITCLEANUP(driver_pcl711);
@@ -185,7 +186,7 @@ struct pcl711_private {
 
 #define devpriv ((struct pcl711_private *)dev->private)
 
-static irqreturn_t pcl711_interrupt(int irq, void *d PT_REGS_ARG)
+static irqreturn_t pcl711_interrupt(int irq, void *d)
 {
 	int lo, hi;
 	int data;
@@ -217,7 +218,7 @@ static irqreturn_t pcl711_interrupt(int irq, void *d PT_REGS_ARG)
 	return IRQ_HANDLED;
 }
 
-static void pcl711_set_changain(struct comedi_device * dev, int chan)
+static void pcl711_set_changain(struct comedi_device *dev, int chan)
 {
 	int chan_register;
 
@@ -244,8 +245,8 @@ static void pcl711_set_changain(struct comedi_device * dev, int chan)
 	}
 }
 
-static int pcl711_ai_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcl711_ai_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i, n;
 	int hi, lo;
@@ -269,9 +270,9 @@ static int pcl711_ai_insn(struct comedi_device * dev, struct comedi_subdevice *
 			hi = inb(dev->iobase + PCL711_AD_HI);
 			if (!(hi & PCL711_DRDY))
 				goto ok;
-			comedi_udelay(1);
+			udelay(1);
 		}
-		rt_printk("comedi%d: pcl711: A/D timeout\n", dev->minor);
+		printk("comedi%d: pcl711: A/D timeout\n", dev->minor);
 		return -ETIME;
 
 	      ok:
@@ -283,8 +284,8 @@ static int pcl711_ai_insn(struct comedi_device * dev, struct comedi_subdevice *
 	return n;
 }
 
-static int pcl711_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int pcl711_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int tmp;
 	int err = 0;
@@ -385,7 +386,7 @@ static int pcl711_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice
 	return 0;
 }
 
-static int pcl711_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pcl711_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	int timer1, timer2;
 	struct comedi_cmd *cmd = &s->async->cmd;
@@ -431,8 +432,8 @@ static int pcl711_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s
 /*
    analog output
 */
-static int pcl711_ao_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcl711_ao_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n;
 	int chan = CR_CHAN(insn->chanspec);
@@ -449,8 +450,8 @@ static int pcl711_ao_insn(struct comedi_device * dev, struct comedi_subdevice *
 	return n;
 }
 
-static int pcl711_ao_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcl711_ao_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n;
 	int chan = CR_CHAN(insn->chanspec);
@@ -464,8 +465,8 @@ static int pcl711_ao_insn_read(struct comedi_device * dev, struct comedi_subdevi
 }
 
 /* Digital port read - Untested on 8112 */
-static int pcl711_di_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcl711_di_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -477,8 +478,8 @@ static int pcl711_di_insn_bits(struct comedi_device * dev, struct comedi_subdevi
 }
 
 /* Digital port write - Untested on 8112 */
-static int pcl711_do_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcl711_do_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -498,12 +499,12 @@ static int pcl711_do_insn_bits(struct comedi_device * dev, struct comedi_subdevi
 }
 
 /*  Free any resources that we have claimed  */
-static int pcl711_detach(struct comedi_device * dev)
+static int pcl711_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: pcl711: remove\n", dev->minor);
 
 	if (dev->irq)
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 
 	if (dev->iobase)
 		release_region(dev->iobase, PCL711_SIZE);
@@ -512,7 +513,7 @@ static int pcl711_detach(struct comedi_device * dev)
 }
 
 /*  Initialization */
-static int pcl711_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int pcl711_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int ret;
 	unsigned long iobase;
@@ -541,7 +542,7 @@ static int pcl711_attach(struct comedi_device * dev, struct comedi_devconfig * i
 		return -EINVAL;
 	}
 	if (irq) {
-		if (comedi_request_irq(irq, pcl711_interrupt, 0, "pcl711", dev)) {
+		if (request_irq(irq, pcl711_interrupt, 0, "pcl711", dev)) {
 			printk("unable to allocate irq %u\n", irq);
 			return -EINVAL;
 		} else {
@@ -550,9 +551,12 @@ static int pcl711_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	}
 	dev->irq = irq;
 
-	if ((ret = alloc_subdevices(dev, 4)) < 0)
+	ret = alloc_subdevices(dev, 4);
+	if (ret < 0)
 		return ret;
-	if ((ret = alloc_private(dev, sizeof(struct pcl711_private))) < 0)
+
+	ret = alloc_private(dev, sizeof(struct pcl711_private));
+	if (ret < 0)
 		return ret;
 
 	s = dev->subdevices + 0;
diff --git a/drivers/staging/comedi/drivers/pcl724.c b/drivers/staging/comedi/drivers/pcl724.c
index cd1e784f25f..699daff3035 100644
--- a/drivers/staging/comedi/drivers/pcl724.c
+++ b/drivers/staging/comedi/drivers/pcl724.c
@@ -54,18 +54,18 @@ See the source for configuration details.
 
 #define SIZE_8255	4
 
-// #define PCL724_IRQ   1  /* no IRQ support now */
+/* #define PCL724_IRQ   1  no IRQ support now */
 
-static int pcl724_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int pcl724_detach(struct comedi_device * dev);
+static int pcl724_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int pcl724_detach(struct comedi_device *dev);
 
 struct pcl724_board {
 
-	const char *name;	// board name
-	int dio;		// num of DIO
-	int numofports;		// num of 8255 subdevices
-	unsigned int IRQbits;	// allowed interrupts
-	unsigned int io_range;	// len of IO space
+	const char *name;	/*  board name */
+	int dio;		/*  num of DIO */
+	int numofports;		/*  num of 8255 subdevices */
+	unsigned int IRQbits;	/*  allowed interrupts */
+	unsigned int io_range;	/*  len of IO space */
 	char can_have96;
 	char is_pet48;
 };
@@ -84,13 +84,13 @@ static const struct pcl724_board boardtypes[] = {
 #define this_board ((const struct pcl724_board *)dev->board_ptr)
 
 static struct comedi_driver driver_pcl724 = {
-      driver_name:"pcl724",
-      module:THIS_MODULE,
-      attach:pcl724_attach,
-      detach:pcl724_detach,
-      board_name:&boardtypes[0].name,
-      num_names:n_boardtypes,
-      offset:sizeof(struct pcl724_board),
+	.driver_name = "pcl724",
+	.module = THIS_MODULE,
+	.attach = pcl724_attach,
+	.detach = pcl724_detach,
+	.board_name = &boardtypes[0].name,
+	.num_names = n_boardtypes,
+	.offset = sizeof(struct pcl724_board),
 };
 
 COMEDI_INITCLEANUP(driver_pcl724);
@@ -124,7 +124,7 @@ static int subdev_8255mapped_cb(int dir, int port, int data,
 	}
 }
 
-static int pcl724_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int pcl724_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	unsigned long iobase;
 	unsigned int iorange;
@@ -137,7 +137,7 @@ static int pcl724_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	iorange = this_board->io_range;
 	if ((this_board->can_have96) && ((it->options[1] == 1)
 			|| (it->options[1] == 96)))
-		iorange = PCL722_96_SIZE;	// PCL-724 in 96 DIO configuration
+		iorange = PCL722_96_SIZE;	/*  PCL-724 in 96 DIO configuration */
 	printk("comedi%d: pcl724: board=%s, 0x%03lx ", dev->minor,
 		this_board->name, iobase);
 	if (!request_region(iobase, iorange, "pcl724")) {
@@ -155,19 +155,18 @@ static int pcl724_attach(struct comedi_device * dev, struct comedi_devconfig * i
 		irq = it->options[1];
 		if (irq) {	/* we want to use IRQ */
 			if (((1 << irq) & this_board->IRQbits) == 0) {
-				rt_printk
+				printk
 					(", IRQ %u is out of allowed range, DISABLING IT",
 					irq);
 				irq = 0;	/* Bad IRQ */
 			} else {
-				if (comedi_request_irq(irq, interrupt_pcl724, 0,
-						"pcl724", dev)) {
-					rt_printk
+				if (request_irq(irq, interrupt_pcl724, 0, "pcl724", dev)) {
+					printk
 						(", unable to allocate IRQ %u, DISABLING IT",
 						irq);
 					irq = 0;	/* Can't use IRQ */
 				} else {
-					rt_printk(", irq=%u", irq);
+					printk(", irq=%u", irq);
 				}
 			}
 		}
@@ -181,9 +180,10 @@ static int pcl724_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	n_subdevices = this_board->numofports;
 	if ((this_board->can_have96) && ((it->options[1] == 1)
 			|| (it->options[1] == 96)))
-		n_subdevices = 4;	// PCL-724 in 96 DIO configuration
+		n_subdevices = 4;	/*  PCL-724 in 96 DIO configuration */
 
-	if ((ret = alloc_subdevices(dev, n_subdevices)) < 0)
+	ret = alloc_subdevices(dev, n_subdevices);
+	if (ret < 0)
 		return ret;
 
 	for (i = 0; i < dev->n_subdevices; i++) {
@@ -200,11 +200,11 @@ static int pcl724_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	return 0;
 }
 
-static int pcl724_detach(struct comedi_device * dev)
+static int pcl724_detach(struct comedi_device *dev)
 {
 	int i;
 
-//      printk("comedi%d: pcl724: remove\n",dev->minor);
+/* printk("comedi%d: pcl724: remove\n",dev->minor); */
 
 	for (i = 0; i < dev->n_subdevices; i++) {
 		subdev_8255_cleanup(dev, dev->subdevices + i);
@@ -212,7 +212,7 @@ static int pcl724_detach(struct comedi_device * dev)
 
 #ifdef PCL724_IRQ
 	if (dev->irq) {
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 	}
 #endif
 
diff --git a/drivers/staging/comedi/drivers/pcl725.c b/drivers/staging/comedi/drivers/pcl725.c
index 0766ba02bd0..1347624d051 100644
--- a/drivers/staging/comedi/drivers/pcl725.c
+++ b/drivers/staging/comedi/drivers/pcl725.c
@@ -20,19 +20,19 @@ Devices: [Advantech] PCL-725 (pcl725)
 #define PCL725_DO 0
 #define PCL725_DI 1
 
-static int pcl725_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int pcl725_detach(struct comedi_device * dev);
+static int pcl725_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int pcl725_detach(struct comedi_device *dev);
 static struct comedi_driver driver_pcl725 = {
-      driver_name:"pcl725",
-      module:THIS_MODULE,
-      attach:pcl725_attach,
-      detach:pcl725_detach,
+	.driver_name = "pcl725",
+	.module = THIS_MODULE,
+	.attach = pcl725_attach,
+	.detach = pcl725_detach,
 };
 
 COMEDI_INITCLEANUP(driver_pcl725);
 
-static int pcl725_do_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcl725_do_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -48,8 +48,8 @@ static int pcl725_do_insn(struct comedi_device * dev, struct comedi_subdevice *
 	return 2;
 }
 
-static int pcl725_di_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcl725_di_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -59,7 +59,7 @@ static int pcl725_di_insn(struct comedi_device * dev, struct comedi_subdevice *
 	return 2;
 }
 
-static int pcl725_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int pcl725_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	unsigned long iobase;
@@ -100,7 +100,7 @@ static int pcl725_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	return 0;
 }
 
-static int pcl725_detach(struct comedi_device * dev)
+static int pcl725_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: pcl725: remove\n", dev->minor);
 
diff --git a/drivers/staging/comedi/drivers/pcl726.c b/drivers/staging/comedi/drivers/pcl726.c
index 6dbd33d7907..149e75f0e09 100644
--- a/drivers/staging/comedi/drivers/pcl726.c
+++ b/drivers/staging/comedi/drivers/pcl726.c
@@ -111,22 +111,22 @@ static const struct comedi_lrange *const rangelist_728[] = {
 	&range_4_20mA, &range_0_20mA
 };
 
-static int pcl726_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int pcl726_detach(struct comedi_device * dev);
+static int pcl726_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int pcl726_detach(struct comedi_device *dev);
 
 struct pcl726_board {
 
-	const char *name;	// driver name
-	int n_aochan;		// num of D/A chans
-	int num_of_ranges;	// num of ranges
-	unsigned int IRQbits;	// allowed interrupts
-	unsigned int io_range;	// len of IO space
-	char have_dio;		// 1=card have DI/DO ports
-	int di_hi;		// ports for DI/DO operations
+	const char *name;	/*  driver name */
+	int n_aochan;		/*  num of D/A chans */
+	int num_of_ranges;	/*  num of ranges */
+	unsigned int IRQbits;	/*  allowed interrupts */
+	unsigned int io_range;	/*  len of IO space */
+	char have_dio;		/*  1=card have DI/DO ports */
+	int di_hi;		/*  ports for DI/DO operations */
 	int di_lo;
 	int do_hi;
 	int do_lo;
-	const struct comedi_lrange *const *range_type_list;	// list of supported ranges
+	const struct comedi_lrange *const *range_type_list;	/*  list of supported ranges */
 };
 
 
@@ -152,13 +152,13 @@ static const struct pcl726_board boardtypes[] = {
 #define this_board ((const struct pcl726_board *)dev->board_ptr)
 
 static struct comedi_driver driver_pcl726 = {
-      driver_name:"pcl726",
-      module:THIS_MODULE,
-      attach:pcl726_attach,
-      detach:pcl726_detach,
-      board_name:&boardtypes[0].name,
-      num_names:n_boardtypes,
-      offset:sizeof(struct pcl726_board),
+	.driver_name = "pcl726",
+	.module = THIS_MODULE,
+	.attach = pcl726_attach,
+	.detach = pcl726_detach,
+	.board_name = &boardtypes[0].name,
+	.num_names = n_boardtypes,
+	.offset = sizeof(struct pcl726_board),
 };
 
 COMEDI_INITCLEANUP(driver_pcl726);
@@ -172,8 +172,8 @@ struct pcl726_private {
 
 #define devpriv ((struct pcl726_private *)dev->private)
 
-static int pcl726_ao_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcl726_ao_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int hi, lo;
 	int n;
@@ -197,8 +197,8 @@ static int pcl726_ao_insn(struct comedi_device * dev, struct comedi_subdevice *
 	return n;
 }
 
-static int pcl726_ao_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcl726_ao_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int chan = CR_CHAN(insn->chanspec);
 	int n;
@@ -209,8 +209,8 @@ static int pcl726_ao_insn_read(struct comedi_device * dev, struct comedi_subdevi
 	return n;
 }
 
-static int pcl726_di_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcl726_di_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -221,8 +221,8 @@ static int pcl726_di_insn_bits(struct comedi_device * dev, struct comedi_subdevi
 	return 2;
 }
 
-static int pcl726_do_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcl726_do_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -241,7 +241,7 @@ static int pcl726_do_insn_bits(struct comedi_device * dev, struct comedi_subdevi
 	return 2;
 }
 
-static int pcl726_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int pcl726_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	unsigned long iobase;
@@ -264,7 +264,8 @@ static int pcl726_attach(struct comedi_device * dev, struct comedi_devconfig * i
 
 	dev->board_name = this_board->name;
 
-	if ((ret = alloc_private(dev, sizeof(struct pcl726_private))) < 0)
+	ret = alloc_private(dev, sizeof(struct pcl726_private));
+	if (ret < 0)
 		return -ENOMEM;
 
 	for (i = 0; i < 12; i++) {
@@ -279,19 +280,19 @@ static int pcl726_attach(struct comedi_device * dev, struct comedi_devconfig * i
 		devpriv->first_chan = 2;
 		if (irq) {	/* we want to use IRQ */
 			if (((1 << irq) & boardtypes[board].IRQbits) == 0) {
-				rt_printk
+				printk
 					(", IRQ %d is out of allowed range, DISABLING IT",
 					irq);
 				irq = 0;	/* Bad IRQ */
 			} else {
-				if (comedi_request_irq(irq, interrupt_pcl818, 0,
+				if (request_irq(irq, interrupt_pcl818, 0,
 						"pcl726", dev)) {
-					rt_printk
+					printk
 						(", unable to allocate IRQ %d, DISABLING IT",
 						irq);
 					irq = 0;	/* Can't use IRQ */
 				} else {
-					rt_printk(", irq=%d", irq);
+					printk(", irq=%d", irq);
 				}
 			}
 		}
@@ -302,7 +303,8 @@ static int pcl726_attach(struct comedi_device * dev, struct comedi_devconfig * i
 
 	printk("\n");
 
-	if ((ret = alloc_subdevices(dev, 3)) < 0)
+	ret = alloc_subdevices(dev, 3);
+	if (ret < 0)
 		return ret;
 
 	s = dev->subdevices + 0;
@@ -360,13 +362,13 @@ static int pcl726_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	return 0;
 }
 
-static int pcl726_detach(struct comedi_device * dev)
+static int pcl726_detach(struct comedi_device *dev)
 {
-//      printk("comedi%d: pcl726: remove\n",dev->minor);
+/* printk("comedi%d: pcl726: remove\n",dev->minor); */
 
 #ifdef ACL6126_IRQ
 	if (dev->irq) {
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 	}
 #endif
 
diff --git a/drivers/staging/comedi/drivers/pcl730.c b/drivers/staging/comedi/drivers/pcl730.c
index f2c6d7c5693..408cbffae41 100644
--- a/drivers/staging/comedi/drivers/pcl730.c
+++ b/drivers/staging/comedi/drivers/pcl730.c
@@ -26,13 +26,13 @@ The ACL-7130 card have an 8254 timer/counter not supported by this driver.
 #define PCL730_DIO_LO	2	/* TTL Digital I/O low byte (D0-D7) */
 #define PCL730_DIO_HI	3	/* TTL Digital I/O high byte (D8-D15) */
 
-static int pcl730_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int pcl730_detach(struct comedi_device * dev);
+static int pcl730_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int pcl730_detach(struct comedi_device *dev);
 
 struct pcl730_board {
 
-	const char *name;	// board name
-	unsigned int io_range;	// len of I/O space
+	const char *name;	/*  board name */
+	unsigned int io_range;	/*  len of I/O space */
 };
 
 
@@ -46,19 +46,19 @@ static const struct pcl730_board boardtypes[] = {
 #define this_board ((const struct pcl730_board *)dev->board_ptr)
 
 static struct comedi_driver driver_pcl730 = {
-      driver_name:"pcl730",
-      module:THIS_MODULE,
-      attach:pcl730_attach,
-      detach:pcl730_detach,
-      board_name:&boardtypes[0].name,
-      num_names:n_boardtypes,
-      offset:sizeof(struct pcl730_board),
+	.driver_name = "pcl730",
+	.module = THIS_MODULE,
+	.attach = pcl730_attach,
+	.detach = pcl730_detach,
+	.board_name = &boardtypes[0].name,
+	.num_names = n_boardtypes,
+	.offset = sizeof(struct pcl730_board),
 };
 
 COMEDI_INITCLEANUP(driver_pcl730);
 
-static int pcl730_do_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcl730_do_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -79,8 +79,8 @@ static int pcl730_do_insn(struct comedi_device * dev, struct comedi_subdevice *
 	return 2;
 }
 
-static int pcl730_di_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcl730_di_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -91,7 +91,7 @@ static int pcl730_di_insn(struct comedi_device * dev, struct comedi_subdevice *
 	return 2;
 }
 
-static int pcl730_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int pcl730_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	unsigned long iobase;
@@ -157,7 +157,7 @@ static int pcl730_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	return 0;
 }
 
-static int pcl730_detach(struct comedi_device * dev)
+static int pcl730_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: pcl730: remove\n", dev->minor);
 
diff --git a/drivers/staging/comedi/drivers/pcl812.c b/drivers/staging/comedi/drivers/pcl812.c
index 11dfd230e56..dd91fe9f5f5 100644
--- a/drivers/staging/comedi/drivers/pcl812.c
+++ b/drivers/staging/comedi/drivers/pcl812.c
@@ -107,6 +107,7 @@ Options for ACL-8113, ISO-813:
         3= 20V unipolar inputs
 */
 
+#include <linux/interrupt.h>
 #include "../comedidev.h"
 
 #include <linux/delay.h>
@@ -117,7 +118,7 @@ Options for ACL-8113, ISO-813:
 
 #undef PCL812_EXTDEBUG		/* if this is defined then a lot of messages is printed */
 
-// hardware types of the cards
+/* hardware types of the cards */
 #define boardPCL812PG 		 0	/* and ACL-8112PG */
 #define boardPCL813B 		 1
 #define boardPCL812		 2
@@ -292,27 +293,27 @@ static const struct comedi_lrange range_a821pgh_ai = { 4, {
 	}
 };
 
-static int pcl812_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int pcl812_detach(struct comedi_device * dev);
+static int pcl812_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int pcl812_detach(struct comedi_device *dev);
 
 struct pcl812_board {
 
-	const char *name;	// board name
-	int board_type;		// type of this board
-	int n_aichan;		// num of AI chans in S.E.
-	int n_aichan_diff;	// DIFF num of chans
-	int n_aochan;		// num of DA chans
-	int n_dichan;		// DI and DO chans
+	const char *name;	/*  board name */
+	int board_type;		/*  type of this board */
+	int n_aichan;		/*  num of AI chans in S.E. */
+	int n_aichan_diff;	/*  DIFF num of chans */
+	int n_aochan;		/*  num of DA chans */
+	int n_dichan;		/*  DI and DO chans */
 	int n_dochan;
-	int ai_maxdata;		// AI resolution
-	unsigned int ai_ns_min;	// max sample speed of card v ns
-	unsigned int i8254_osc_base;	// clock base
-	const struct comedi_lrange *rangelist_ai;	// rangelist for A/D
-	const struct comedi_lrange *rangelist_ao;	// rangelist for D/A
-	unsigned int IRQbits;	// allowed IRQ
-	unsigned char DMAbits;	// allowed DMA chans
-	unsigned char io_range;	// iorange for this board
-	unsigned char haveMPC508;	// 1=board use MPC508A multiplexor
+	int ai_maxdata;		/*  AI resolution */
+	unsigned int ai_ns_min;	/*  max sample speed of card v ns */
+	unsigned int i8254_osc_base;	/*  clock base */
+	const struct comedi_lrange *rangelist_ai;	/*  rangelist for A/D */
+	const struct comedi_lrange *rangelist_ao;	/*  rangelist for D/A */
+	unsigned int IRQbits;	/*  allowed IRQ */
+	unsigned char DMAbits;	/*  allowed DMA chans */
+	unsigned char io_range;	/*  iorange for this board */
+	unsigned char haveMPC508;	/*  1=board use MPC508A multiplexor */
 };
 
 
@@ -377,50 +378,50 @@ static const struct pcl812_board boardtypes[] = {
 #define this_board ((const struct pcl812_board *)dev->board_ptr)
 
 static struct comedi_driver driver_pcl812 = {
-      driver_name:"pcl812",
-      module:THIS_MODULE,
-      attach:pcl812_attach,
-      detach:pcl812_detach,
-      board_name:&boardtypes[0].name,
-      num_names:n_boardtypes,
-      offset:sizeof(struct pcl812_board),
+	.driver_name = "pcl812",
+	.module = THIS_MODULE,
+	.attach = pcl812_attach,
+	.detach = pcl812_detach,
+	.board_name = &boardtypes[0].name,
+	.num_names = n_boardtypes,
+	.offset = sizeof(struct pcl812_board),
 };
 
 COMEDI_INITCLEANUP(driver_pcl812);
 
 struct pcl812_private {
 
-	unsigned char valid;	// =1 device is OK
-	unsigned char dma;	// >0 use dma ( usedDMA channel)
-	unsigned char use_diff;	// =1 diff inputs
-	unsigned char use_MPC;	// 1=board uses MPC508A multiplexor
-	unsigned char use_ext_trg;	// 1=board uses external trigger
-	unsigned char range_correction;	// =1 we must add 1 to range number
-	unsigned char old_chan_reg;	// lastly used chan/gain pair
+	unsigned char valid;	/*  =1 device is OK */
+	unsigned char dma;	/*  >0 use dma ( usedDMA channel) */
+	unsigned char use_diff;	/*  =1 diff inputs */
+	unsigned char use_MPC;	/*  1=board uses MPC508A multiplexor */
+	unsigned char use_ext_trg;	/*  1=board uses external trigger */
+	unsigned char range_correction;	/*  =1 we must add 1 to range number */
+	unsigned char old_chan_reg;	/*  lastly used chan/gain pair */
 	unsigned char old_gain_reg;
-	unsigned char mode_reg_int;	// there is stored INT number for some card
-	unsigned char ai_neverending;	// =1 we do unlimited AI
-	unsigned char ai_eos;	// 1=EOS wake up
-	unsigned char ai_dma;	// =1 we use DMA
-	unsigned int ai_poll_ptr;	// how many sampes transfer poll
-	unsigned int ai_scans;	// len of scanlist
-	unsigned int ai_act_scan;	// how many scans we finished
-	unsigned int ai_chanlist[MAX_CHANLIST_LEN];	// our copy of channel/range list
-	unsigned int ai_n_chan;	// how many channels is measured
-	unsigned int ai_flags;	// flaglist
-	unsigned int ai_data_len;	// len of data buffer
-	short *ai_data;	// data buffer
-	unsigned int ai_is16b;	// =1 we have 16 bit card
-	unsigned long dmabuf[2];	// PTR to DMA buf
-	unsigned int dmapages[2];	// how many pages we have allocated
-	unsigned int hwdmaptr[2];	// HW PTR to DMA buf
-	unsigned int hwdmasize[2];	// DMA buf size in bytes
-	unsigned int dmabytestomove[2];	// how many bytes DMA transfer
-	int next_dma_buf;	// which buffer is next to use
-	unsigned int dma_runs_to_end;	// how many times we must switch DMA buffers
-	unsigned int last_dma_run;	// how many bytes to transfer on last DMA buffer
-	unsigned int max_812_ai_mode0_rangewait;	// setling time for gain
-	unsigned int ao_readback[2];	// data for AO readback
+	unsigned char mode_reg_int;	/*  there is stored INT number for some card */
+	unsigned char ai_neverending;	/*  =1 we do unlimited AI */
+	unsigned char ai_eos;	/*  1=EOS wake up */
+	unsigned char ai_dma;	/*  =1 we use DMA */
+	unsigned int ai_poll_ptr;	/*  how many sampes transfer poll */
+	unsigned int ai_scans;	/*  len of scanlist */
+	unsigned int ai_act_scan;	/*  how many scans we finished */
+	unsigned int ai_chanlist[MAX_CHANLIST_LEN];	/*  our copy of channel/range list */
+	unsigned int ai_n_chan;	/*  how many channels is measured */
+	unsigned int ai_flags;	/*  flaglist */
+	unsigned int ai_data_len;	/*  len of data buffer */
+	short *ai_data;	/*  data buffer */
+	unsigned int ai_is16b;	/*  =1 we have 16 bit card */
+	unsigned long dmabuf[2];	/*  PTR to DMA buf */
+	unsigned int dmapages[2];	/*  how many pages we have allocated */
+	unsigned int hwdmaptr[2];	/*  HW PTR to DMA buf */
+	unsigned int hwdmasize[2];	/*  DMA buf size in bytes */
+	unsigned int dmabytestomove[2];	/*  how many bytes DMA transfer */
+	int next_dma_buf;	/*  which buffer is next to use */
+	unsigned int dma_runs_to_end;	/*  how many times we must switch DMA buffers */
+	unsigned int last_dma_run;	/*  how many bytes to transfer on last DMA buffer */
+	unsigned int max_812_ai_mode0_rangewait;	/*  setling time for gain */
+	unsigned int ao_readback[2];	/*  data for AO readback */
 };
 
 
@@ -429,33 +430,33 @@ struct pcl812_private {
 /*
 ==============================================================================
 */
-static void start_pacer(struct comedi_device * dev, int mode, unsigned int divisor1,
+static void start_pacer(struct comedi_device *dev, int mode, unsigned int divisor1,
 	unsigned int divisor2);
-static void setup_range_channel(struct comedi_device * dev, struct comedi_subdevice * s,
+static void setup_range_channel(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int rangechan, char wait);
-static int pcl812_ai_cancel(struct comedi_device * dev, struct comedi_subdevice * s);
+static int pcl812_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
 /*
 ==============================================================================
 */
-static int pcl812_ai_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcl812_ai_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n;
 	int timeout, hi;
 
 	outb(devpriv->mode_reg_int | 1, dev->iobase + PCL812_MODE);	/* select software trigger */
-	setup_range_channel(dev, s, insn->chanspec, 1);	// select channel and renge
+	setup_range_channel(dev, s, insn->chanspec, 1);	/*  select channel and renge */
 	for (n = 0; n < insn->n; n++) {
 		outb(255, dev->iobase + PCL812_SOFTTRIG);	/* start conversion */
-		comedi_udelay(5);
+		udelay(5);
 		timeout = 50;	/* wait max 50us, it must finish under 33us */
 		while (timeout--) {
 			hi = inb(dev->iobase + PCL812_AD_HI);
 			if (!(hi & PCL812_DRDY))
 				goto conv_finish;
-			comedi_udelay(1);
+			udelay(1);
 		}
-		rt_printk
+		printk
 			("comedi%d: pcl812: (%s at 0x%lx) A/D insn read timeout\n",
 			dev->minor, dev->board_name, dev->iobase);
 		outb(devpriv->mode_reg_int | 0, dev->iobase + PCL812_MODE);
@@ -471,24 +472,24 @@ static int pcl812_ai_insn_read(struct comedi_device * dev, struct comedi_subdevi
 /*
 ==============================================================================
 */
-static int acl8216_ai_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int acl8216_ai_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n;
 	int timeout;
 
 	outb(1, dev->iobase + PCL812_MODE);	/* select software trigger */
-	setup_range_channel(dev, s, insn->chanspec, 1);	// select channel and renge
+	setup_range_channel(dev, s, insn->chanspec, 1);	/*  select channel and renge */
 	for (n = 0; n < insn->n; n++) {
 		outb(255, dev->iobase + PCL812_SOFTTRIG);	/* start conversion */
-		comedi_udelay(5);
+		udelay(5);
 		timeout = 50;	/* wait max 50us, it must finish under 33us */
 		while (timeout--) {
 			if (!(inb(dev->iobase + ACL8216_STATUS) & ACL8216_DRDY))
 				goto conv_finish;
-			comedi_udelay(1);
+			udelay(1);
 		}
-		rt_printk
+		printk
 			("comedi%d: pcl812: (%s at 0x%lx) A/D insn read timeout\n",
 			dev->minor, dev->board_name, dev->iobase);
 		outb(0, dev->iobase + PCL812_MODE);
@@ -507,8 +508,8 @@ static int acl8216_ai_insn_read(struct comedi_device * dev, struct comedi_subdev
 /*
 ==============================================================================
 */
-static int pcl812_ao_insn_write(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcl812_ao_insn_write(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int chan = CR_CHAN(insn->chanspec);
 	int i;
@@ -527,8 +528,8 @@ static int pcl812_ao_insn_write(struct comedi_device * dev, struct comedi_subdev
 /*
 ==============================================================================
 */
-static int pcl812_ao_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcl812_ao_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int chan = CR_CHAN(insn->chanspec);
 	int i;
@@ -543,8 +544,8 @@ static int pcl812_ao_insn_read(struct comedi_device * dev, struct comedi_subdevi
 /*
 ==============================================================================
 */
-static int pcl812_di_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcl812_di_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -558,8 +559,8 @@ static int pcl812_di_insn_bits(struct comedi_device * dev, struct comedi_subdevi
 /*
 ==============================================================================
 */
-static int pcl812_do_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcl812_do_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -579,15 +580,15 @@ static int pcl812_do_insn_bits(struct comedi_device * dev, struct comedi_subdevi
 /*
 ==============================================================================
 */
-static void pcl812_cmdtest_out(int e, struct comedi_cmd * cmd)
+static void pcl812_cmdtest_out(int e, struct comedi_cmd *cmd)
 {
-	rt_printk("pcl812 e=%d startsrc=%x scansrc=%x convsrc=%x\n", e,
+	printk("pcl812 e=%d startsrc=%x scansrc=%x convsrc=%x\n", e,
 		cmd->start_src, cmd->scan_begin_src, cmd->convert_src);
-	rt_printk("pcl812 e=%d startarg=%d scanarg=%d convarg=%d\n", e,
+	printk("pcl812 e=%d startarg=%d scanarg=%d convarg=%d\n", e,
 		cmd->start_arg, cmd->scan_begin_arg, cmd->convert_arg);
-	rt_printk("pcl812 e=%d stopsrc=%x scanend=%x\n", e, cmd->stop_src,
+	printk("pcl812 e=%d stopsrc=%x scanend=%x\n", e, cmd->stop_src,
 		cmd->scan_end_src);
-	rt_printk("pcl812 e=%d stoparg=%d scanendarg=%d chanlistlen=%d\n", e,
+	printk("pcl812 e=%d stoparg=%d scanendarg=%d chanlistlen=%d\n", e,
 		cmd->stop_arg, cmd->scan_end_arg, cmd->chanlist_len);
 }
 #endif
@@ -595,14 +596,14 @@ static void pcl812_cmdtest_out(int e, struct comedi_cmd * cmd)
 /*
 ==============================================================================
 */
-static int pcl812_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int pcl812_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	int tmp, divisor1, divisor2;
 
 #ifdef PCL812_EXTDEBUG
-	rt_printk("pcl812 EDBG: BGN: pcl812_ai_cmdtest(...)\n");
+	printk("pcl812 EDBG: BGN: pcl812_ai_cmdtest(...)\n");
 	pcl812_cmdtest_out(-1, cmd);
 #endif
 	/* step 1: make sure trigger sources are trivially valid */
@@ -639,7 +640,7 @@ static int pcl812_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice
 	if (err) {
 #ifdef PCL812_EXTDEBUG
 		pcl812_cmdtest_out(1, cmd);
-		rt_printk
+		printk
 			("pcl812 EDBG: BGN: pcl812_ai_cmdtest(...) err=%d ret=1\n",
 			err);
 #endif
@@ -681,7 +682,7 @@ static int pcl812_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice
 	if (err) {
 #ifdef PCL812_EXTDEBUG
 		pcl812_cmdtest_out(2, cmd);
-		rt_printk
+		printk
 			("pcl812 EDBG: BGN: pcl812_ai_cmdtest(...) err=%d ret=2\n",
 			err);
 #endif
@@ -739,7 +740,7 @@ static int pcl812_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice
 	if (err) {
 #ifdef PCL812_EXTDEBUG
 		pcl812_cmdtest_out(3, cmd);
-		rt_printk
+		printk
 			("pcl812 EDBG: BGN: pcl812_ai_cmdtest(...) err=%d ret=3\n",
 			err);
 #endif
@@ -761,7 +762,7 @@ static int pcl812_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice
 
 	if (err) {
 #ifdef PCL812_EXTDEBUG
-		rt_printk
+		printk
 			("pcl812 EDBG: BGN: pcl812_ai_cmdtest(...) err=%d ret=4\n",
 			err);
 #endif
@@ -774,13 +775,13 @@ static int pcl812_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice
 /*
 ==============================================================================
 */
-static int pcl812_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pcl812_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	unsigned int divisor1 = 0, divisor2 = 0, i, dma_flags, bytes;
 	struct comedi_cmd *cmd = &s->async->cmd;
 
 #ifdef PCL812_EXTDEBUG
-	rt_printk("pcl812 EDBG: BGN: pcl812_ai_cmd(...)\n");
+	printk("pcl812 EDBG: BGN: pcl812_ai_cmd(...)\n");
 #endif
 
 	if (cmd->start_src != TRIG_NOW)
@@ -809,18 +810,18 @@ static int pcl812_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s
 			cmd->flags & TRIG_ROUND_MASK);
 	}
 
-	start_pacer(dev, -1, 0, 0);	// stop pacer
+	start_pacer(dev, -1, 0, 0);	/*  stop pacer */
 
 	devpriv->ai_n_chan = cmd->chanlist_len;
 	memcpy(devpriv->ai_chanlist, cmd->chanlist,
 		sizeof(unsigned int) * cmd->scan_end_arg);
-	setup_range_channel(dev, s, devpriv->ai_chanlist[0], 1);	// select first channel and range
+	setup_range_channel(dev, s, devpriv->ai_chanlist[0], 1);	/*  select first channel and range */
 
-	if (devpriv->dma) {	// check if we can use DMA transfer
+	if (devpriv->dma) {	/*  check if we can use DMA transfer */
 		devpriv->ai_dma = 1;
 		for (i = 1; i < devpriv->ai_n_chan; i++)
 			if (devpriv->ai_chanlist[0] != devpriv->ai_chanlist[i]) {
-				devpriv->ai_dma = 0;	// we cann't use DMA :-(
+				devpriv->ai_dma = 0;	/*  we cann't use DMA :-( */
 				break;
 			}
 	} else
@@ -841,14 +842,14 @@ static int pcl812_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s
 	devpriv->ai_poll_ptr = 0;
 	s->async->cur_chan = 0;
 
-	if ((devpriv->ai_flags & TRIG_WAKE_EOS)) {	// don't we want wake up every scan?
+	if ((devpriv->ai_flags & TRIG_WAKE_EOS)) {	/*  don't we want wake up every scan? */
 		devpriv->ai_eos = 1;
 		if (devpriv->ai_n_chan == 1)
-			devpriv->ai_dma = 0;	// DMA is useless for this situation
+			devpriv->ai_dma = 0;	/*  DMA is useless for this situation */
 	}
 
 	if (devpriv->ai_dma) {
-		if (devpriv->ai_eos) {	// we use EOS, so adapt DMA buffer to one scan
+		if (devpriv->ai_eos) {	/*  we use EOS, so adapt DMA buffer to one scan */
 			devpriv->dmabytestomove[0] =
 				devpriv->ai_n_chan * sizeof(short);
 			devpriv->dmabytestomove[1] =
@@ -866,9 +867,9 @@ static int pcl812_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s
 			if (devpriv->ai_neverending) {
 				devpriv->dma_runs_to_end = 1;
 			} else {
-				bytes = devpriv->ai_n_chan * devpriv->ai_scans * sizeof(short);	// how many samples we must transfer?
-				devpriv->dma_runs_to_end = bytes / devpriv->dmabytestomove[0];	// how many DMA pages we must fill
-				devpriv->last_dma_run = bytes % devpriv->dmabytestomove[0];	//on last dma transfer must be moved
+				bytes = devpriv->ai_n_chan * devpriv->ai_scans * sizeof(short);	/*  how many samples we must transfer? */
+				devpriv->dma_runs_to_end = bytes / devpriv->dmabytestomove[0];	/*  how many DMA pages we must fill */
+				devpriv->last_dma_run = bytes % devpriv->dmabytestomove[0];	/* on last dma transfer must be moved */
 				if (devpriv->dma_runs_to_end == 0)
 					devpriv->dmabytestomove[0] =
 						devpriv->last_dma_run;
@@ -892,7 +893,7 @@ static int pcl812_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s
 		release_dma_lock(dma_flags);
 		enable_dma(devpriv->dma);
 #ifdef PCL812_EXTDEBUG
-		rt_printk
+		printk
 			("pcl812 EDBG:   DMA %d PTR 0x%0x/0x%0x LEN %u/%u EOS %d\n",
 			devpriv->dma, devpriv->hwdmaptr[0],
 			devpriv->hwdmaptr[1], devpriv->dmabytestomove[0],
@@ -907,13 +908,13 @@ static int pcl812_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s
 	}
 
 	if (devpriv->ai_dma) {
-		outb(devpriv->mode_reg_int | 2, dev->iobase + PCL812_MODE);	// let's go!
+		outb(devpriv->mode_reg_int | 2, dev->iobase + PCL812_MODE);	/*  let's go! */
 	} else {
-		outb(devpriv->mode_reg_int | 6, dev->iobase + PCL812_MODE);	// let's go!
+		outb(devpriv->mode_reg_int | 6, dev->iobase + PCL812_MODE);	/*  let's go! */
 	}
 
 #ifdef PCL812_EXTDEBUG
-	rt_printk("pcl812 EDBG: END: pcl812_ai_cmd(...)\n");
+	printk("pcl812 EDBG: END: pcl812_ai_cmd(...)\n");
 #endif
 
 	return 0;
@@ -939,7 +940,7 @@ static irqreturn_t interrupt_pcl812_ai_int(int irq, void *d)
 				err = 0;
 				break;
 			}
-			comedi_udelay(1);
+			udelay(1);
 		}
 	} else {
 		mask = 0x0fff;
@@ -948,12 +949,12 @@ static irqreturn_t interrupt_pcl812_ai_int(int irq, void *d)
 				err = 0;
 				break;
 			}
-			comedi_udelay(1);
+			udelay(1);
 		}
 	}
 
 	if (err) {
-		rt_printk
+		printk
 			("comedi%d: pcl812: (%s at 0x%lx) A/D cmd IRQ without DRDY!\n",
 			dev->minor, dev->board_name, dev->iobase);
 		pcl812_ai_cancel(dev, s);
@@ -984,14 +985,14 @@ static irqreturn_t interrupt_pcl812_ai_int(int irq, void *d)
 /*
 ==============================================================================
 */
-static void transfer_from_dma_buf(struct comedi_device * dev, struct comedi_subdevice * s,
-	short * ptr, unsigned int bufptr, unsigned int len)
+static void transfer_from_dma_buf(struct comedi_device *dev, struct comedi_subdevice *s,
+	short *ptr, unsigned int bufptr, unsigned int len)
 {
 	unsigned int i;
 
 	s->async->events = 0;
 	for (i = len; i; i--) {
-		comedi_buf_put(s->async, ptr[bufptr++]);	// get one sample
+		comedi_buf_put(s->async, ptr[bufptr++]);	/*  get one sample */
 
 		if (s->async->cur_chan == 0) {
 			devpriv->ai_act_scan++;
@@ -1019,7 +1020,7 @@ static irqreturn_t interrupt_pcl812_ai_dma(int irq, void *d)
 	short *ptr;
 
 #ifdef PCL812_EXTDEBUG
-	rt_printk("pcl812 EDBG: BGN: interrupt_pcl812_ai_dma(...)\n");
+	printk("pcl812 EDBG: BGN: interrupt_pcl812_ai_dma(...)\n");
 #endif
 	ptr = (short *) devpriv->dmabuf[devpriv->next_dma_buf];
 	len = (devpriv->dmabytestomove[devpriv->next_dma_buf] >> 1) -
@@ -1053,7 +1054,7 @@ static irqreturn_t interrupt_pcl812_ai_dma(int irq, void *d)
 	transfer_from_dma_buf(dev, s, ptr, bufptr, len);
 
 #ifdef PCL812_EXTDEBUG
-	rt_printk("pcl812 EDBG: END: interrupt_pcl812_ai_dma(...)\n");
+	printk("pcl812 EDBG: END: interrupt_pcl812_ai_dma(...)\n");
 #endif
 	return IRQ_HANDLED;
 }
@@ -1061,7 +1062,7 @@ static irqreturn_t interrupt_pcl812_ai_dma(int irq, void *d)
 /*
 ==============================================================================
 */
-static irqreturn_t interrupt_pcl812(int irq, void *d PT_REGS_ARG)
+static irqreturn_t interrupt_pcl812(int irq, void *d)
 {
 	struct comedi_device *dev = d;
 
@@ -1079,33 +1080,33 @@ static irqreturn_t interrupt_pcl812(int irq, void *d PT_REGS_ARG)
 /*
 ==============================================================================
 */
-static int pcl812_ai_poll(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pcl812_ai_poll(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	unsigned long flags;
 	unsigned int top1, top2, i;
 
 	if (!devpriv->ai_dma)
-		return 0;	// poll is valid only for DMA transfer
+		return 0;	/*  poll is valid only for DMA transfer */
 
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	spin_lock_irqsave(&dev->spinlock, flags);
 
 	for (i = 0; i < 10; i++) {
-		top1 = get_dma_residue(devpriv->ai_dma);	// where is now DMA
+		top1 = get_dma_residue(devpriv->ai_dma);	/*  where is now DMA */
 		top2 = get_dma_residue(devpriv->ai_dma);
 		if (top1 == top2)
 			break;
 	}
 
 	if (top1 != top2) {
-		comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+		spin_unlock_irqrestore(&dev->spinlock, flags);
 		return 0;
 	}
 
-	top1 = devpriv->dmabytestomove[1 - devpriv->next_dma_buf] - top1;	// where is now DMA in buffer
-	top1 >>= 1;		// sample position
+	top1 = devpriv->dmabytestomove[1 - devpriv->next_dma_buf] - top1;	/*  where is now DMA in buffer */
+	top1 >>= 1;		/*  sample position */
 	top2 = top1 - devpriv->ai_poll_ptr;
-	if (top2 < 1) {		// no new samples
-		comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	if (top2 < 1) {		/*  no new samples */
+		spin_unlock_irqrestore(&dev->spinlock, flags);
 		return 0;
 	}
 
@@ -1113,9 +1114,9 @@ static int pcl812_ai_poll(struct comedi_device * dev, struct comedi_subdevice *
 		(void *)devpriv->dmabuf[1 - devpriv->next_dma_buf],
 		devpriv->ai_poll_ptr, top2);
 
-	devpriv->ai_poll_ptr = top1;	// new buffer position
+	devpriv->ai_poll_ptr = top1;	/*  new buffer position */
 
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
 	return s->async->buf_write_count - s->async->buf_read_count;
 }
@@ -1123,27 +1124,27 @@ static int pcl812_ai_poll(struct comedi_device * dev, struct comedi_subdevice *
 /*
 ==============================================================================
 */
-static void setup_range_channel(struct comedi_device * dev, struct comedi_subdevice * s,
+static void setup_range_channel(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int rangechan, char wait)
 {
-	unsigned char chan_reg = CR_CHAN(rangechan);	// normal board
-	unsigned char gain_reg = CR_RANGE(rangechan) + devpriv->range_correction;	// gain index
+	unsigned char chan_reg = CR_CHAN(rangechan);	/*  normal board */
+	unsigned char gain_reg = CR_RANGE(rangechan) + devpriv->range_correction;	/*  gain index */
 
 	if ((chan_reg == devpriv->old_chan_reg)
 		&& (gain_reg == devpriv->old_gain_reg))
-		return;		// we can return, no change
+		return;		/*  we can return, no change */
 
 	devpriv->old_chan_reg = chan_reg;
 	devpriv->old_gain_reg = gain_reg;
 
 	if (devpriv->use_MPC) {
 		if (devpriv->use_diff) {
-			chan_reg = chan_reg | 0x30;	// DIFF inputs
+			chan_reg = chan_reg | 0x30;	/*  DIFF inputs */
 		} else {
 			if (chan_reg & 0x80) {
-				chan_reg = chan_reg | 0x20;	// SE inputs 8-15
+				chan_reg = chan_reg | 0x20;	/*  SE inputs 8-15 */
 			} else {
-				chan_reg = chan_reg | 0x10;	// SE inputs 0-7
+				chan_reg = chan_reg | 0x10;	/*  SE inputs 0-7 */
 			}
 		}
 	}
@@ -1152,23 +1153,23 @@ static void setup_range_channel(struct comedi_device * dev, struct comedi_subdev
 	outb(gain_reg, dev->iobase + PCL812_GAIN);	/* select gain */
 
 	if (wait) {
-		comedi_udelay(devpriv->max_812_ai_mode0_rangewait);	// XXX this depends on selected range and can be very long for some high gain ranges!
+		udelay(devpriv->max_812_ai_mode0_rangewait);	/*  XXX this depends on selected range and can be very long for some high gain ranges! */
 	}
 }
 
 /*
 ==============================================================================
 */
-static void start_pacer(struct comedi_device * dev, int mode, unsigned int divisor1,
+static void start_pacer(struct comedi_device *dev, int mode, unsigned int divisor1,
 	unsigned int divisor2)
 {
 #ifdef PCL812_EXTDEBUG
-	rt_printk("pcl812 EDBG: BGN: start_pacer(%d,%u,%u)\n", mode, divisor1,
+	printk("pcl812 EDBG: BGN: start_pacer(%d,%u,%u)\n", mode, divisor1,
 		divisor2);
 #endif
 	outb(0xb4, dev->iobase + PCL812_CTRCTL);
 	outb(0x74, dev->iobase + PCL812_CTRCTL);
-	comedi_udelay(1);
+	udelay(1);
 
 	if (mode == 1) {
 		outb(divisor2 & 0xff, dev->iobase + PCL812_CTR2);
@@ -1177,14 +1178,14 @@ static void start_pacer(struct comedi_device * dev, int mode, unsigned int divis
 		outb((divisor1 >> 8) & 0xff, dev->iobase + PCL812_CTR1);
 	}
 #ifdef PCL812_EXTDEBUG
-	rt_printk("pcl812 EDBG: END: start_pacer(...)\n");
+	printk("pcl812 EDBG: END: start_pacer(...)\n");
 #endif
 }
 
 /*
 ==============================================================================
 */
-static void free_resources(struct comedi_device * dev)
+static void free_resources(struct comedi_device *dev)
 {
 
 	if (dev->private) {
@@ -1196,7 +1197,7 @@ static void free_resources(struct comedi_device * dev)
 			free_dma(devpriv->dma);
 	}
 	if (dev->irq)
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 	if (dev->iobase)
 		release_region(dev->iobase, this_board->io_range);
 }
@@ -1204,19 +1205,19 @@ static void free_resources(struct comedi_device * dev)
 /*
 ==============================================================================
 */
-static int pcl812_ai_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pcl812_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 #ifdef PCL812_EXTDEBUG
-	rt_printk("pcl812 EDBG: BGN: pcl812_ai_cancel(...)\n");
+	printk("pcl812 EDBG: BGN: pcl812_ai_cancel(...)\n");
 #endif
 	if (devpriv->ai_dma)
 		disable_dma(devpriv->dma);
 	outb(0, dev->iobase + PCL812_CLRINT);	/* clear INT request */
 	outb(devpriv->mode_reg_int | 0, dev->iobase + PCL812_MODE);	/* Stop A/D */
-	start_pacer(dev, -1, 0, 0);	// stop 8254
+	start_pacer(dev, -1, 0, 0);	/*  stop 8254 */
 	outb(0, dev->iobase + PCL812_CLRINT);	/* clear INT request */
 #ifdef PCL812_EXTDEBUG
-	rt_printk("pcl812 EDBG: END: pcl812_ai_cancel(...)\n");
+	printk("pcl812 EDBG: END: pcl812_ai_cancel(...)\n");
 #endif
 	return 0;
 }
@@ -1224,14 +1225,14 @@ static int pcl812_ai_cancel(struct comedi_device * dev, struct comedi_subdevice
 /*
 ==============================================================================
 */
-static void pcl812_reset(struct comedi_device * dev)
+static void pcl812_reset(struct comedi_device *dev)
 {
 #ifdef PCL812_EXTDEBUG
-	rt_printk("pcl812 EDBG: BGN: pcl812_reset(...)\n");
+	printk("pcl812 EDBG: BGN: pcl812_reset(...)\n");
 #endif
 	outb(0, dev->iobase + PCL812_MUX);
 	outb(0 + devpriv->range_correction, dev->iobase + PCL812_GAIN);
-	devpriv->old_chan_reg = -1;	// invalidate chain/gain memory
+	devpriv->old_chan_reg = -1;	/*  invalidate chain/gain memory */
 	devpriv->old_gain_reg = -1;
 
 	switch (this_board->board_type) {
@@ -1244,7 +1245,7 @@ static void pcl812_reset(struct comedi_device * dev)
 	case boardA821:
 		outb(0, dev->iobase + PCL812_DA1_LO);
 		outb(0, dev->iobase + PCL812_DA1_HI);
-		start_pacer(dev, -1, 0, 0);	// stop 8254
+		start_pacer(dev, -1, 0, 0);	/*  stop 8254 */
 		outb(0, dev->iobase + PCL812_DO_HI);
 		outb(0, dev->iobase + PCL812_DO_LO);
 		outb(devpriv->mode_reg_int | 0, dev->iobase + PCL812_MODE);
@@ -1254,19 +1255,19 @@ static void pcl812_reset(struct comedi_device * dev)
 	case boardPCL813:
 	case boardISO813:
 	case boardACL8113:
-		comedi_udelay(5);
+		udelay(5);
 		break;
 	}
-	comedi_udelay(5);
+	udelay(5);
 #ifdef PCL812_EXTDEBUG
-	rt_printk("pcl812 EDBG: END: pcl812_reset(...)\n");
+	printk("pcl812 EDBG: END: pcl812_reset(...)\n");
 #endif
 }
 
 /*
 ==============================================================================
 */
-static int pcl812_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int pcl812_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int ret, subdev;
 	unsigned long iobase;
@@ -1286,7 +1287,8 @@ static int pcl812_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	}
 	dev->iobase = iobase;
 
-	if ((ret = alloc_private(dev, sizeof(struct pcl812_private))) < 0) {
+	ret = alloc_private(dev, sizeof(struct pcl812_private));
+	if (ret < 0) {
 		free_resources(dev);
 		return ret;	/* Can't alloc mem */
 	}
@@ -1301,8 +1303,7 @@ static int pcl812_attach(struct comedi_device * dev, struct comedi_devconfig * i
 				printk(", IRQ %u is out of allowed range, DISABLING IT", irq);
 				irq = 0;	/* Bad IRQ */
 			} else {
-				if (comedi_request_irq(irq, interrupt_pcl812, 0,
-						"pcl812", dev)) {
+				if (request_irq(irq, interrupt_pcl812, 0, "pcl812", dev)) {
 					printk(", unable to allocate IRQ %u, DISABLING IT", irq);
 					irq = 0;	/* Can't use IRQ */
 				} else {
@@ -1364,7 +1365,8 @@ static int pcl812_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	if (this_board->n_dochan > 0)
 		n_subdevices++;
 
-	if ((ret = alloc_subdevices(dev, n_subdevices)) < 0) {
+	ret = alloc_subdevices(dev, n_subdevices);
+	if (ret < 0) {
 		free_resources(dev);
 		return ret;
 	}
@@ -1570,7 +1572,7 @@ static int pcl812_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	case boardACL8112:
 		devpriv->max_812_ai_mode0_rangewait = 1;
 		if (it->options[3] > 0)
-			devpriv->use_ext_trg = 1;	// we use external trigger
+			devpriv->use_ext_trg = 1;	/*  we use external trigger */
 	case boardA821:
 		devpriv->max_812_ai_mode0_rangewait = 1;
 		devpriv->mode_reg_int = (irq << 4) & 0xf0;
@@ -1594,11 +1596,11 @@ static int pcl812_attach(struct comedi_device * dev, struct comedi_devconfig * i
 /*
 ==============================================================================
  */
-static int pcl812_detach(struct comedi_device * dev)
+static int pcl812_detach(struct comedi_device *dev)
 {
 
 #ifdef PCL812_EXTDEBUG
-	rt_printk("comedi%d: pcl812: remove\n", dev->minor);
+	printk("comedi%d: pcl812: remove\n", dev->minor);
 #endif
 	free_resources(dev);
 	return 0;
diff --git a/drivers/staging/comedi/drivers/pcl816.c b/drivers/staging/comedi/drivers/pcl816.c
index 515ba74cc7f..19465c1b53c 100644
--- a/drivers/staging/comedi/drivers/pcl816.c
+++ b/drivers/staging/comedi/drivers/pcl816.c
@@ -43,38 +43,38 @@ Configuration Options:
 
 #define DEBUG(x) x
 
-// boards constants
-// IO space len
+/* boards constants */
+/* IO space len */
 #define PCLx1x_RANGE 16
 
-//#define outb(x,y)  printk("OUTB(%x, 200+%d)\n", x,y-0x200); outb(x,y)
+/* #define outb(x,y)  printk("OUTB(%x, 200+%d)\n", x,y-0x200); outb(x,y) */
 
-// INTEL 8254 counters
+/* INTEL 8254 counters */
 #define PCL816_CTR0 4
 #define PCL816_CTR1 5
 #define PCL816_CTR2 6
-// R: counter read-back register W: counter control
+/* R: counter read-back register W: counter control */
 #define PCL816_CTRCTL 7
 
-// R: A/D high byte W: A/D range control
+/* R: A/D high byte W: A/D range control */
 #define PCL816_RANGE 9
-// W: clear INT request
+/* W: clear INT request */
 #define PCL816_CLRINT 10
-// R: next mux scan channel W: mux scan channel & range control pointer
+/* R: next mux scan channel W: mux scan channel & range control pointer */
 #define PCL816_MUX 11
-// R/W: operation control register
+/* R/W: operation control register */
 #define PCL816_CONTROL 12
 
-// R: return status byte  W: set DMA/IRQ
+/* R: return status byte  W: set DMA/IRQ */
 #define PCL816_STATUS 13
 #define PCL816_STATUS_DRDY_MASK 0x80
 
-// R: low byte of A/D W: soft A/D trigger
+/* R: low byte of A/D W: soft A/D trigger */
 #define PCL816_AD_LO 8
-// R: high byte of A/D W: A/D range control
+/* R: high byte of A/D W: A/D range control */
 #define PCL816_AD_HI 9
 
-// type of interrupt handler
+/* type of interrupt handler */
 #define INT_TYPE_AI1_INT 1
 #define INT_TYPE_AI1_DMA 2
 #define INT_TYPE_AI3_INT 4
@@ -83,7 +83,7 @@ Configuration Options:
 #define INT_TYPE_AI1_DMA_RTC 9
 #define INT_TYPE_AI3_DMA_RTC 10
 
-// RTC stuff...
+/* RTC stuff... */
 #define RTC_IRQ 	8
 #define RTC_IO_EXTENT	0x10
 #endif
@@ -103,35 +103,35 @@ static const struct comedi_lrange range_pcl816 = { 8, {
 };
 struct pcl816_board {
 
-	const char *name;	// board name
-	int n_ranges;		// len of range list
-	int n_aichan;		// num of A/D chans in diferencial mode
-	unsigned int ai_ns_min;	// minimal alllowed delay between samples (in ns)
-	int n_aochan;		// num of D/A chans
-	int n_dichan;		// num of DI chans
-	int n_dochan;		// num of DO chans
-	const struct comedi_lrange *ai_range_type;	// default A/D rangelist
-	const struct comedi_lrange *ao_range_type;	// dafault D/A rangelist
-	unsigned int io_range;	// len of IO space
-	unsigned int IRQbits;	// allowed interrupts
-	unsigned int DMAbits;	// allowed DMA chans
-	int ai_maxdata;		// maxdata for A/D
-	int ao_maxdata;		// maxdata for D/A
-	int ai_chanlist;	// allowed len of channel list A/D
-	int ao_chanlist;	// allowed len of channel list D/A
-	int i8254_osc_base;	// 1/frequency of on board oscilator in ns
+	const char *name;	/*  board name */
+	int n_ranges;		/*  len of range list */
+	int n_aichan;		/*  num of A/D chans in diferencial mode */
+	unsigned int ai_ns_min;	/*  minimal alllowed delay between samples (in ns) */
+	int n_aochan;		/*  num of D/A chans */
+	int n_dichan;		/*  num of DI chans */
+	int n_dochan;		/*  num of DO chans */
+	const struct comedi_lrange *ai_range_type;	/*  default A/D rangelist */
+	const struct comedi_lrange *ao_range_type;	/*  dafault D/A rangelist */
+	unsigned int io_range;	/*  len of IO space */
+	unsigned int IRQbits;	/*  allowed interrupts */
+	unsigned int DMAbits;	/*  allowed DMA chans */
+	int ai_maxdata;		/*  maxdata for A/D */
+	int ao_maxdata;		/*  maxdata for D/A */
+	int ai_chanlist;	/*  allowed len of channel list A/D */
+	int ao_chanlist;	/*  allowed len of channel list D/A */
+	int i8254_osc_base;	/*  1/frequency of on board oscilator in ns */
 };
 
 
 static const struct pcl816_board boardtypes[] = {
 	{"pcl816", 8, 16, 10000, 1, 16, 16, &range_pcl816,
 			&range_pcl816, PCLx1x_RANGE,
-			0x00fc,	// IRQ mask
-			0x0a,	// DMA mask
-			0xffff,	// 16-bit card
-			0xffff,	// D/A maxdata
+			0x00fc,	/*  IRQ mask */
+			0x0a,	/*  DMA mask */
+			0xffff,	/*  16-bit card */
+			0xffff,	/*  D/A maxdata */
 			1024,
-			1,	// ao chan list
+			1,	/*  ao chan list */
 		100},
 	{"pcl814b", 8, 16, 10000, 1, 16, 16, &range_pcl816,
 			&range_pcl816, PCLx1x_RANGE,
@@ -148,8 +148,8 @@ static const struct pcl816_board boardtypes[] = {
 #define devpriv ((struct pcl816_private *)dev->private)
 #define this_board ((const struct pcl816_board *)dev->board_ptr)
 
-static int pcl816_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int pcl816_detach(struct comedi_device * dev);
+static int pcl816_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int pcl816_detach(struct comedi_device *dev);
 
 #ifdef unused
 static int RTC_lock = 0;	/* RTC lock */
@@ -157,55 +157,55 @@ static int RTC_timer_lock = 0;	/* RTC int lock */
 #endif
 
 static struct comedi_driver driver_pcl816 = {
-      driver_name:"pcl816",
-      module:THIS_MODULE,
-      attach:pcl816_attach,
-      detach:pcl816_detach,
-      board_name:&boardtypes[0].name,
-      num_names:n_boardtypes,
-      offset:sizeof(struct pcl816_board),
+	.driver_name = "pcl816",
+	.module = THIS_MODULE,
+	.attach = pcl816_attach,
+	.detach = pcl816_detach,
+	.board_name = &boardtypes[0].name,
+	.num_names = n_boardtypes,
+	.offset = sizeof(struct pcl816_board),
 };
 
 COMEDI_INITCLEANUP(driver_pcl816);
 
 struct pcl816_private {
 
-	unsigned int dma;	// used DMA, 0=don't use DMA
-	int dma_rtc;		// 1=RTC used with DMA, 0=no RTC alloc
+	unsigned int dma;	/*  used DMA, 0=don't use DMA */
+	int dma_rtc;		/*  1=RTC used with DMA, 0=no RTC alloc */
 #ifdef unused
-	unsigned long rtc_iobase;	// RTC port region
+	unsigned long rtc_iobase;	/*  RTC port region */
 	unsigned int rtc_iosize;
 	unsigned int rtc_irq;
 #endif
-	unsigned long dmabuf[2];	// pointers to begin of DMA buffers
-	unsigned int dmapages[2];	// len of DMA buffers in PAGE_SIZEs
-	unsigned int hwdmaptr[2];	// hardware address of DMA buffers
-	unsigned int hwdmasize[2];	// len of DMA buffers in Bytes
-	unsigned int dmasamplsize;	// size in samples hwdmasize[0]/2
-	unsigned int last_top_dma;	// DMA pointer in last RTC int
-	int next_dma_buf;	// which DMA buffer will be used next round
-	long dma_runs_to_end;	// how many we must permorm DMA transfer to end of record
-	unsigned long last_dma_run;	// how many bytes we must transfer on last DMA page
-
-	unsigned int ai_scans;	// len of scanlist
-	unsigned char ai_neverending;	// if=1, then we do neverending record (you must use cancel())
-	int irq_free;		// 1=have allocated IRQ
-	int irq_blocked;	// 1=IRQ now uses any subdev
+	unsigned long dmabuf[2];	/*  pointers to begin of DMA buffers */
+	unsigned int dmapages[2];	/*  len of DMA buffers in PAGE_SIZEs */
+	unsigned int hwdmaptr[2];	/*  hardware address of DMA buffers */
+	unsigned int hwdmasize[2];	/*  len of DMA buffers in Bytes */
+	unsigned int dmasamplsize;	/*  size in samples hwdmasize[0]/2 */
+	unsigned int last_top_dma;	/*  DMA pointer in last RTC int */
+	int next_dma_buf;	/*  which DMA buffer will be used next round */
+	long dma_runs_to_end;	/*  how many we must permorm DMA transfer to end of record */
+	unsigned long last_dma_run;	/*  how many bytes we must transfer on last DMA page */
+
+	unsigned int ai_scans;	/*  len of scanlist */
+	unsigned char ai_neverending;	/*  if=1, then we do neverending record (you must use cancel()) */
+	int irq_free;		/*  1=have allocated IRQ */
+	int irq_blocked;	/*  1=IRQ now uses any subdev */
 #ifdef unused
-	int rtc_irq_blocked;	// 1=we now do AI with DMA&RTC
+	int rtc_irq_blocked;	/*  1=we now do AI with DMA&RTC */
 #endif
-	int irq_was_now_closed;	// when IRQ finish, there's stored int816_mode for last interrupt
-	int int816_mode;	// who now uses IRQ - 1=AI1 int, 2=AI1 dma, 3=AI3 int, 4AI3 dma
-	struct comedi_subdevice *last_int_sub;	// ptr to subdevice which now finish
-	int ai_act_scan;	// how many scans we finished
-	unsigned int ai_act_chanlist[16];	// MUX setting for actual AI operations
-	unsigned int ai_act_chanlist_len;	// how long is actual MUX list
-	unsigned int ai_act_chanlist_pos;	// actual position in MUX list
-	unsigned int ai_poll_ptr;	// how many sampes transfer poll
-	struct comedi_subdevice *sub_ai;	// ptr to AI subdevice
+	int irq_was_now_closed;	/*  when IRQ finish, there's stored int816_mode for last interrupt */
+	int int816_mode;	/*  who now uses IRQ - 1=AI1 int, 2=AI1 dma, 3=AI3 int, 4AI3 dma */
+	struct comedi_subdevice *last_int_sub;	/*  ptr to subdevice which now finish */
+	int ai_act_scan;	/*  how many scans we finished */
+	unsigned int ai_act_chanlist[16];	/*  MUX setting for actual AI operations */
+	unsigned int ai_act_chanlist_len;	/*  how long is actual MUX list */
+	unsigned int ai_act_chanlist_pos;	/*  actual position in MUX list */
+	unsigned int ai_poll_ptr;	/*  how many sampes transfer poll */
+	struct comedi_subdevice *sub_ai;	/*  ptr to AI subdevice */
 #ifdef unused
-	struct timer_list rtc_irq_timer;	// timer for RTC sanity check
-	unsigned long rtc_freq;	// RTC int freq
+	struct timer_list rtc_irq_timer;	/*  timer for RTC sanity check */
+	unsigned long rtc_freq;	/*  RTC int freq */
 #endif
 };
 
@@ -213,36 +213,36 @@ struct pcl816_private {
 /*
 ==============================================================================
 */
-static int check_and_setup_channel_list(struct comedi_device * dev,
-	struct comedi_subdevice * s, unsigned int *chanlist, int chanlen);
-static int pcl816_ai_cancel(struct comedi_device * dev, struct comedi_subdevice * s);
-static void start_pacer(struct comedi_device * dev, int mode, unsigned int divisor1,
+static int check_and_setup_channel_list(struct comedi_device *dev,
+	struct comedi_subdevice *s, unsigned int *chanlist, int chanlen);
+static int pcl816_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
+static void start_pacer(struct comedi_device *dev, int mode, unsigned int divisor1,
 	unsigned int divisor2);
 #ifdef unused
 static int set_rtc_irq_bit(unsigned char bit);
 #endif
 
-static int pcl816_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd);
-static int pcl816_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s);
+static int pcl816_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd);
+static int pcl816_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
 
 /*
 ==============================================================================
    ANALOG INPUT MODE0, 816 cards, slow version
 */
-static int pcl816_ai_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcl816_ai_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n;
 	int timeout;
 
 	DPRINTK("mode 0 analog input\n");
-	// software trigger, DMA and INT off
+	/*  software trigger, DMA and INT off */
 	outb(0, dev->iobase + PCL816_CONTROL);
-	// clear INT (conversion end) flag
+	/*  clear INT (conversion end) flag */
 	outb(0, dev->iobase + PCL816_CLRINT);
 
-	// Set the input channel
+	/*  Set the input channel */
 	outb(CR_CHAN(insn->chanspec) & 0xf, dev->iobase + PCL816_MUX);
 	outb(CR_RANGE(insn->chanspec), dev->iobase + PCL816_RANGE);	/* select gain */
 
@@ -254,7 +254,7 @@ static int pcl816_ai_insn_read(struct comedi_device * dev, struct comedi_subdevi
 		while (timeout--) {
 			if (!(inb(dev->iobase + PCL816_STATUS) &
 					PCL816_STATUS_DRDY_MASK)) {
-				// return read value
+				/*  return read value */
 				data[n] =
 					((inb(dev->iobase +
 							PCL816_AD_HI) << 8) |
@@ -263,9 +263,9 @@ static int pcl816_ai_insn_read(struct comedi_device * dev, struct comedi_subdevi
 				outb(0, dev->iobase + PCL816_CLRINT);	/* clear INT (conversion end) flag */
 				break;
 			}
-			comedi_udelay(1);
+			udelay(1);
 		}
-		// Return timeout error
+		/*  Return timeout error */
 		if (!timeout) {
 			comedi_error(dev, "A/D insn timeout\n");
 			data[0] = 0;
@@ -293,9 +293,9 @@ static irqreturn_t interrupt_pcl816_ai_mode13_int(int irq, void *d)
 		if (!(inb(dev->iobase + PCL816_STATUS) &
 				PCL816_STATUS_DRDY_MASK))
 			break;
-		comedi_udelay(1);
+		udelay(1);
 	}
-	if (!timeout) {		// timeout, bail error
+	if (!timeout) {		/*  timeout, bail error */
 		outb(0, dev->iobase + PCL816_CLRINT);	/* clear INT request */
 		comedi_error(dev, "A/D mode1/3 IRQ without DRDY!");
 		pcl816_ai_cancel(dev, s);
@@ -305,7 +305,7 @@ static irqreturn_t interrupt_pcl816_ai_mode13_int(int irq, void *d)
 
 	}
 
-	// get the sample
+	/*  get the sample */
 	low = inb(dev->iobase + PCL816_AD_LO);
 	hi = inb(dev->iobase + PCL816_AD_HI);
 
@@ -334,8 +334,8 @@ static irqreturn_t interrupt_pcl816_ai_mode13_int(int irq, void *d)
 ==============================================================================
    analog input dma mode 1 & 3, 816 cards
 */
-static void transfer_from_dma_buf(struct comedi_device * dev, struct comedi_subdevice * s,
-	short * ptr, unsigned int bufptr, unsigned int len)
+static void transfer_from_dma_buf(struct comedi_device *dev, struct comedi_subdevice *s,
+	short *ptr, unsigned int bufptr, unsigned int len)
 {
 	int i;
 
@@ -352,7 +352,7 @@ static void transfer_from_dma_buf(struct comedi_device * dev, struct comedi_subd
 		}
 
 		if (!devpriv->ai_neverending)
-			if (devpriv->ai_act_scan >= devpriv->ai_scans) {	// all data sampled
+			if (devpriv->ai_act_scan >= devpriv->ai_scans) {	/*  all data sampled */
 				pcl816_ai_cancel(dev, s);
 				s->async->events |= COMEDI_CB_EOA;
 				s->async->events |= COMEDI_CB_BLOCK;
@@ -374,12 +374,12 @@ static irqreturn_t interrupt_pcl816_ai_mode13_dma(int irq, void *d)
 	disable_dma(devpriv->dma);
 	this_dma_buf = devpriv->next_dma_buf;
 
-	if ((devpriv->dma_runs_to_end > -1) || devpriv->ai_neverending) {	// switch dma bufs
+	if ((devpriv->dma_runs_to_end > -1) || devpriv->ai_neverending) {	/*  switch dma bufs */
 
 		devpriv->next_dma_buf = 1 - devpriv->next_dma_buf;
 		set_dma_mode(devpriv->dma, DMA_MODE_READ);
 		dma_flags = claim_dma_lock();
-//  clear_dma_ff (devpriv->dma);
+/* clear_dma_ff (devpriv->dma); */
 		set_dma_addr(devpriv->dma,
 			devpriv->hwdmaptr[devpriv->next_dma_buf]);
 		if (devpriv->dma_runs_to_end) {
@@ -409,7 +409,7 @@ static irqreturn_t interrupt_pcl816_ai_mode13_dma(int irq, void *d)
 ==============================================================================
     INT procedure
 */
-static irqreturn_t interrupt_pcl816(int irq, void *d PT_REGS_ARG)
+static irqreturn_t interrupt_pcl816(int irq, void *d)
 {
 	struct comedi_device *dev = d;
 	DPRINTK("<I>");
@@ -433,7 +433,7 @@ static irqreturn_t interrupt_pcl816(int irq, void *d PT_REGS_ARG)
 		(!devpriv->int816_mode)) {
 		if (devpriv->irq_was_now_closed) {
 			devpriv->irq_was_now_closed = 0;
-			// comedi_error(dev,"last IRQ..");
+			/*  comedi_error(dev,"last IRQ.."); */
 			return IRQ_HANDLED;
 		}
 		comedi_error(dev, "bad IRQ!");
@@ -447,28 +447,28 @@ static irqreturn_t interrupt_pcl816(int irq, void *d PT_REGS_ARG)
 ==============================================================================
    COMMAND MODE
 */
-static void pcl816_cmdtest_out(int e, struct comedi_cmd * cmd)
+static void pcl816_cmdtest_out(int e, struct comedi_cmd *cmd)
 {
-	rt_printk("pcl816 e=%d startsrc=%x scansrc=%x convsrc=%x\n", e,
+	printk("pcl816 e=%d startsrc=%x scansrc=%x convsrc=%x\n", e,
 		cmd->start_src, cmd->scan_begin_src, cmd->convert_src);
-	rt_printk("pcl816 e=%d startarg=%d scanarg=%d convarg=%d\n", e,
+	printk("pcl816 e=%d startarg=%d scanarg=%d convarg=%d\n", e,
 		cmd->start_arg, cmd->scan_begin_arg, cmd->convert_arg);
-	rt_printk("pcl816 e=%d stopsrc=%x scanend=%x\n", e, cmd->stop_src,
+	printk("pcl816 e=%d stopsrc=%x scanend=%x\n", e, cmd->stop_src,
 		cmd->scan_end_src);
-	rt_printk("pcl816 e=%d stoparg=%d scanendarg=%d chanlistlen=%d\n", e,
+	printk("pcl816 e=%d stoparg=%d scanendarg=%d chanlistlen=%d\n", e,
 		cmd->stop_arg, cmd->scan_end_arg, cmd->chanlist_len);
 }
 
 /*
 ==============================================================================
 */
-static int pcl816_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int pcl816_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	int tmp, divisor1, divisor2;
 
-	DEBUG(rt_printk("pcl816 pcl812_ai_cmdtest\n");
+	DEBUG(printk("pcl816 pcl812_ai_cmdtest\n");
 		pcl816_cmdtest_out(-1, cmd););
 
 	/* step 1: make sure trigger sources are trivially valid */
@@ -482,7 +482,7 @@ static int pcl816_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice
 	if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src)
 		err++;
 
-	if (!cmd->convert_src & (TRIG_EXT | TRIG_TIMER))
+	if (!(cmd->convert_src & (TRIG_EXT | TRIG_TIMER)))
 		err++;
 
 	tmp = cmd->scan_end_src;
@@ -597,7 +597,7 @@ static int pcl816_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice
 	return 0;
 }
 
-static int pcl816_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pcl816_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	unsigned int divisor1 = 0, divisor2 = 0, dma_flags, bytes, dmairq;
 	struct comedi_cmd *cmd = &s->async->cmd;
@@ -610,7 +610,7 @@ static int pcl816_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s
 		return -EINVAL;
 	if (cmd->scan_end_arg != cmd->chanlist_len)
 		return -EINVAL;
-//      if(cmd->chanlist_len>MAX_CHANLIST_LEN) return -EINVAL;
+/* if(cmd->chanlist_len>MAX_CHANLIST_LEN) return -EINVAL; */
 	if (devpriv->irq_blocked)
 		return -EBUSY;
 
@@ -621,7 +621,7 @@ static int pcl816_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s
 		i8253_cascade_ns_to_timer(this_board->i8254_osc_base, &divisor1,
 			&divisor2, &cmd->convert_arg,
 			cmd->flags & TRIG_ROUND_MASK);
-		if (divisor1 == 1) {	// PCL816 crash if any divisor is set to 1
+		if (divisor1 == 1) {	/*  PCL816 crash if any divisor is set to 1 */
 			divisor1 = 2;
 			divisor2 /= 2;
 		}
@@ -631,12 +631,12 @@ static int pcl816_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s
 		}
 	}
 
-	start_pacer(dev, -1, 0, 0);	// stop pacer
+	start_pacer(dev, -1, 0, 0);	/*  stop pacer */
 
 	if (!check_and_setup_channel_list(dev, s, cmd->chanlist,
 			cmd->chanlist_len))
 		return -EINVAL;
-	comedi_udelay(1);
+	udelay(1);
 
 	devpriv->ai_act_scan = 0;
 	s->async->cur_chan = 0;
@@ -652,19 +652,19 @@ static int pcl816_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s
 		devpriv->ai_neverending = 1;
 	}
 
-	if ((cmd->flags & TRIG_WAKE_EOS)) {	// don't we want wake up every scan?
+	if ((cmd->flags & TRIG_WAKE_EOS)) {	/*  don't we want wake up every scan? */
 		printk("pl816: You wankt WAKE_EOS but I dont want handle it");
-		//              devpriv->ai_eos=1;
-		//if (devpriv->ai_n_chan==1)
-		//      devpriv->dma=0; // DMA is useless for this situation
+		/*               devpriv->ai_eos=1; */
+		/* if (devpriv->ai_n_chan==1) */
+		/*       devpriv->dma=0; // DMA is useless for this situation */
 	}
 
 	if (devpriv->dma) {
 		bytes = devpriv->hwdmasize[0];
 		if (!devpriv->ai_neverending) {
-			bytes = s->async->cmd.chanlist_len * s->async->cmd.chanlist_len * sizeof(short);	// how many
-			devpriv->dma_runs_to_end = bytes / devpriv->hwdmasize[0];	// how many DMA pages we must fill
-			devpriv->last_dma_run = bytes % devpriv->hwdmasize[0];	//on last dma transfer must be moved
+			bytes = s->async->cmd.chanlist_len * s->async->cmd.chanlist_len * sizeof(short);	/*  how many */
+			devpriv->dma_runs_to_end = bytes / devpriv->hwdmasize[0];	/*  how many DMA pages we must fill */
+			devpriv->last_dma_run = bytes % devpriv->hwdmasize[0];	/* on last dma transfer must be moved */
 			devpriv->dma_runs_to_end--;
 			if (devpriv->dma_runs_to_end >= 0)
 				bytes = devpriv->hwdmasize[0];
@@ -687,14 +687,14 @@ static int pcl816_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s
 	switch (cmd->convert_src) {
 	case TRIG_TIMER:
 		devpriv->int816_mode = INT_TYPE_AI1_DMA;
-		outb(0x32, dev->iobase + PCL816_CONTROL);	// Pacer+IRQ+DMA
-		outb(dmairq, dev->iobase + PCL816_STATUS);	// write irq and DMA to card
+		outb(0x32, dev->iobase + PCL816_CONTROL);	/*  Pacer+IRQ+DMA */
+		outb(dmairq, dev->iobase + PCL816_STATUS);	/*  write irq and DMA to card */
 		break;
 
 	default:
 		devpriv->int816_mode = INT_TYPE_AI3_DMA;
-		outb(0x34, dev->iobase + PCL816_CONTROL);	// Ext trig+IRQ+DMA
-		outb(dmairq, dev->iobase + PCL816_STATUS);	// write irq to card
+		outb(0x34, dev->iobase + PCL816_CONTROL);	/*  Ext trig+IRQ+DMA */
+		outb(dmairq, dev->iobase + PCL816_STATUS);	/*  write irq to card */
 		break;
 	}
 
@@ -702,32 +702,32 @@ static int pcl816_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s
 	return 0;
 }
 
-static int pcl816_ai_poll(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pcl816_ai_poll(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	unsigned long flags;
 	unsigned int top1, top2, i;
 
 	if (!devpriv->dma)
-		return 0;	// poll is valid only for DMA transfer
+		return 0;	/*  poll is valid only for DMA transfer */
 
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	spin_lock_irqsave(&dev->spinlock, flags);
 
 	for (i = 0; i < 20; i++) {
-		top1 = get_dma_residue(devpriv->dma);	// where is now DMA
+		top1 = get_dma_residue(devpriv->dma);	/*  where is now DMA */
 		top2 = get_dma_residue(devpriv->dma);
 		if (top1 == top2)
 			break;
 	}
 	if (top1 != top2) {
-		comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+		spin_unlock_irqrestore(&dev->spinlock, flags);
 		return 0;
 	}
 
-	top1 = devpriv->hwdmasize[0] - top1;	// where is now DMA in buffer
-	top1 >>= 1;		// sample position
+	top1 = devpriv->hwdmasize[0] - top1;	/*  where is now DMA in buffer */
+	top1 >>= 1;		/*  sample position */
 	top2 = top1 - devpriv->ai_poll_ptr;
-	if (top2 < 1) {		// no new samples
-		comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	if (top2 < 1) {		/*  no new samples */
+		spin_unlock_irqrestore(&dev->spinlock, flags);
 		return 0;
 	}
 
@@ -735,8 +735,8 @@ static int pcl816_ai_poll(struct comedi_device * dev, struct comedi_subdevice *
 		(short *) devpriv->dmabuf[devpriv->next_dma_buf],
 		devpriv->ai_poll_ptr, top2);
 
-	devpriv->ai_poll_ptr = top1;	// new buffer position
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	devpriv->ai_poll_ptr = top1;	/*  new buffer position */
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
 	return s->async->buf_write_count - s->async->buf_read_count;
 }
@@ -745,16 +745,16 @@ static int pcl816_ai_poll(struct comedi_device * dev, struct comedi_subdevice *
 ==============================================================================
  cancel any mode 1-4 AI
 */
-static int pcl816_ai_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pcl816_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
-//  DEBUG(rt_printk("pcl816_ai_cancel()\n");)
+/* DEBUG(printk("pcl816_ai_cancel()\n");) */
 
 	if (devpriv->irq_blocked > 0) {
 		switch (devpriv->int816_mode) {
 #ifdef unused
 		case INT_TYPE_AI1_DMA_RTC:
 		case INT_TYPE_AI3_DMA_RTC:
-			set_rtc_irq_bit(0);	// stop RTC
+			set_rtc_irq_bit(0);	/*  stop RTC */
 			del_timer(&devpriv->rtc_irq_timer);
 #endif
 		case INT_TYPE_AI1_DMA:
@@ -763,7 +763,7 @@ static int pcl816_ai_cancel(struct comedi_device * dev, struct comedi_subdevice
 		case INT_TYPE_AI1_INT:
 		case INT_TYPE_AI3_INT:
 			outb(inb(dev->iobase + PCL816_CONTROL) & 0x73, dev->iobase + PCL816_CONTROL);	/* Stop A/D */
-			comedi_udelay(1);
+			udelay(1);
 			outb(0, dev->iobase + PCL816_CONTROL);	/* Stop A/D */
 			outb(0xb0, dev->iobase + PCL816_CTRCTL);	/* Stop pacer */
 			outb(0x70, dev->iobase + PCL816_CTRCTL);
@@ -776,12 +776,12 @@ static int pcl816_ai_cancel(struct comedi_device * dev, struct comedi_subdevice
 			devpriv->irq_was_now_closed = devpriv->int816_mode;
 			devpriv->int816_mode = 0;
 			devpriv->last_int_sub = s;
-//        s->busy = 0;
+/* s->busy = 0; */
 			break;
 		}
 	}
 
-	DEBUG(rt_printk("comedi: pcl816_ai_cancel() successful\n");
+	DEBUG(printk("comedi: pcl816_ai_cancel() successful\n");
 		)
 		return 0;
 }
@@ -793,34 +793,34 @@ static int pcl816_ai_cancel(struct comedi_device * dev, struct comedi_subdevice
 static int pcl816_check(unsigned long iobase)
 {
 	outb(0x00, iobase + PCL816_MUX);
-	comedi_udelay(1);
+	udelay(1);
 	if (inb(iobase + PCL816_MUX) != 0x00)
-		return 1;	//there isn't card
+		return 1;	/* there isn't card */
 	outb(0x55, iobase + PCL816_MUX);
-	comedi_udelay(1);
+	udelay(1);
 	if (inb(iobase + PCL816_MUX) != 0x55)
-		return 1;	//there isn't card
+		return 1;	/* there isn't card */
 	outb(0x00, iobase + PCL816_MUX);
-	comedi_udelay(1);
+	udelay(1);
 	outb(0x18, iobase + PCL816_CONTROL);
-	comedi_udelay(1);
+	udelay(1);
 	if (inb(iobase + PCL816_CONTROL) != 0x18)
-		return 1;	//there isn't card
-	return 0;		// ok, card exist
+		return 1;	/* there isn't card */
+	return 0;		/*  ok, card exist */
 }
 
 /*
 ==============================================================================
  reset whole PCL-816 cards
 */
-static void pcl816_reset(struct comedi_device * dev)
+static void pcl816_reset(struct comedi_device *dev)
 {
-//  outb (0, dev->iobase + PCL818_DA_LO);       // DAC=0V
-//  outb (0, dev->iobase + PCL818_DA_HI);
-//  comedi_udelay (1);
-//  outb (0, dev->iobase + PCL818_DO_HI);       // DO=$0000
-//  outb (0, dev->iobase + PCL818_DO_LO);
-//  comedi_udelay (1);
+/* outb (0, dev->iobase + PCL818_DA_LO);         DAC=0V */
+/* outb (0, dev->iobase + PCL818_DA_HI); */
+/* udelay (1); */
+/* outb (0, dev->iobase + PCL818_DO_HI);        DO=$0000 */
+/* outb (0, dev->iobase + PCL818_DO_LO); */
+/* udelay (1); */
 	outb(0, dev->iobase + PCL816_CONTROL);
 	outb(0, dev->iobase + PCL816_MUX);
 	outb(0, dev->iobase + PCL816_CLRINT);
@@ -835,16 +835,16 @@ static void pcl816_reset(struct comedi_device * dev)
  Start/stop pacer onboard pacer
 */
 static void
-start_pacer(struct comedi_device * dev, int mode, unsigned int divisor1,
+start_pacer(struct comedi_device *dev, int mode, unsigned int divisor1,
 	unsigned int divisor2)
 {
 	outb(0x32, dev->iobase + PCL816_CTRCTL);
 	outb(0xff, dev->iobase + PCL816_CTR0);
 	outb(0x00, dev->iobase + PCL816_CTR0);
-	comedi_udelay(1);
-	outb(0xb4, dev->iobase + PCL816_CTRCTL);	// set counter 2 as mode 3
-	outb(0x74, dev->iobase + PCL816_CTRCTL);	// set counter 1 as mode 3
-	comedi_udelay(1);
+	udelay(1);
+	outb(0xb4, dev->iobase + PCL816_CTRCTL);	/*  set counter 2 as mode 3 */
+	outb(0x74, dev->iobase + PCL816_CTRCTL);	/*  set counter 1 as mode 3 */
+	udelay(1);
 
 	if (mode == 1) {
 		DPRINTK("mode %d, divisor1 %d, divisor2 %d\n", mode, divisor1,
@@ -856,7 +856,7 @@ start_pacer(struct comedi_device * dev, int mode, unsigned int divisor1,
 	}
 
 	/* clear pending interrupts (just in case) */
-//      outb(0, dev->iobase + PCL816_CLRINT);
+/* outb(0, dev->iobase + PCL816_CLRINT); */
 }
 
 /*
@@ -865,49 +865,49 @@ start_pacer(struct comedi_device * dev, int mode, unsigned int divisor1,
  If it's ok, then program scan/gain logic
 */
 static int
-check_and_setup_channel_list(struct comedi_device * dev, struct comedi_subdevice * s,
+check_and_setup_channel_list(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int *chanlist, int chanlen)
 {
 	unsigned int chansegment[16];
 	unsigned int i, nowmustbechan, seglen, segpos;
 
-	// correct channel and range number check itself comedi/range.c
+	/*  correct channel and range number check itself comedi/range.c */
 	if (chanlen < 1) {
 		comedi_error(dev, "range/channel list is empty!");
 		return 0;
 	}
 
 	if (chanlen > 1) {
-		chansegment[0] = chanlist[0];	// first channel is everytime ok
+		chansegment[0] = chanlist[0];	/*  first channel is everytime ok */
 		for (i = 1, seglen = 1; i < chanlen; i++, seglen++) {
-			// build part of chanlist
-			DEBUG(rt_printk("%d. %d %d\n", i, CR_CHAN(chanlist[i]),
+			/*  build part of chanlist */
+			DEBUG(printk("%d. %d %d\n", i, CR_CHAN(chanlist[i]),
 					CR_RANGE(chanlist[i]));
 				)
 				if (chanlist[0] == chanlist[i])
-				break;	// we detect loop, this must by finish
+				break;	/*  we detect loop, this must by finish */
 			nowmustbechan =
 				(CR_CHAN(chansegment[i - 1]) + 1) % chanlen;
 			if (nowmustbechan != CR_CHAN(chanlist[i])) {
-				// channel list isn't continous :-(
-				rt_printk
+				/*  channel list isn't continous :-( */
+				printk
 					("comedi%d: pcl816: channel list must be continous! chanlist[%i]=%d but must be %d or %d!\n",
 					dev->minor, i, CR_CHAN(chanlist[i]),
 					nowmustbechan, CR_CHAN(chanlist[0]));
 				return 0;
 			}
-			chansegment[i] = chanlist[i];	// well, this is next correct channel in list
+			chansegment[i] = chanlist[i];	/*  well, this is next correct channel in list */
 		}
 
-		for (i = 0, segpos = 0; i < chanlen; i++) {	// check whole chanlist
-			DEBUG(rt_printk("%d %d=%d %d\n",
+		for (i = 0, segpos = 0; i < chanlen; i++) {	/*  check whole chanlist */
+			DEBUG(printk("%d %d=%d %d\n",
 					CR_CHAN(chansegment[i % seglen]),
 					CR_RANGE(chansegment[i % seglen]),
 					CR_CHAN(chanlist[i]),
 					CR_RANGE(chanlist[i]));
 				)
 				if (chanlist[i] != chansegment[i % seglen]) {
-				rt_printk
+				printk
 					("comedi%d: pcl816: bad channel or range number! chanlist[%i]=%d,%d,%d and not %d,%d,%d!\n",
 					dev->minor, i, CR_CHAN(chansegment[i]),
 					CR_RANGE(chansegment[i]),
@@ -915,7 +915,7 @@ check_and_setup_channel_list(struct comedi_device * dev, struct comedi_subdevice
 					CR_CHAN(chanlist[i % seglen]),
 					CR_RANGE(chanlist[i % seglen]),
 					CR_AREF(chansegment[i % seglen]));
-				return 0;	// chan/gain list is strange
+				return 0;	/*  chan/gain list is strange */
 			}
 		}
 	} else {
@@ -925,17 +925,17 @@ check_and_setup_channel_list(struct comedi_device * dev, struct comedi_subdevice
 	devpriv->ai_act_chanlist_len = seglen;
 	devpriv->ai_act_chanlist_pos = 0;
 
-	for (i = 0; i < seglen; i++) {	// store range list to card
+	for (i = 0; i < seglen; i++) {	/*  store range list to card */
 		devpriv->ai_act_chanlist[i] = CR_CHAN(chanlist[i]);
 		outb(CR_CHAN(chanlist[0]) & 0xf, dev->iobase + PCL816_MUX);
 		outb(CR_RANGE(chanlist[0]), dev->iobase + PCL816_RANGE);	/* select gain */
 	}
 
-	comedi_udelay(1);
+	udelay(1);
 
 	outb(devpriv->ai_act_chanlist[0] | (devpriv->ai_act_chanlist[seglen - 1] << 4), dev->iobase + PCL816_MUX);	/* select channel interval to scan */
 
-	return 1;		// we can serve this with MUX logic
+	return 1;		/*  we can serve this with MUX logic */
 }
 
 #ifdef unused
@@ -979,9 +979,9 @@ static int set_rtc_irq_bit(unsigned char bit)
 ==============================================================================
   Free any resources that we have claimed
 */
-static void free_resources(struct comedi_device * dev)
+static void free_resources(struct comedi_device *dev)
 {
-	//rt_printk("free_resource()\n");
+	/* printk("free_resource()\n"); */
 	if (dev->private) {
 		pcl816_ai_cancel(dev, devpriv->sub_ai);
 		pcl816_reset(dev);
@@ -993,7 +993,7 @@ static void free_resources(struct comedi_device * dev)
 			free_pages(devpriv->dmabuf[1], devpriv->dmapages[1]);
 #ifdef unused
 		if (devpriv->rtc_irq)
-			comedi_free_irq(devpriv->rtc_irq, dev);
+			free_irq(devpriv->rtc_irq, dev);
 		if ((devpriv->dma_rtc) && (RTC_lock == 1)) {
 			if (devpriv->rtc_iobase)
 				release_region(devpriv->rtc_iobase,
@@ -1006,7 +1006,7 @@ static void free_resources(struct comedi_device * dev)
 		free_irq(dev->irq, dev);
 	if (dev->iobase)
 		release_region(dev->iobase, this_board->io_range);
-	//rt_printk("free_resource() end\n");
+	/* printk("free_resource() end\n"); */
 }
 
 /*
@@ -1015,13 +1015,13 @@ static void free_resources(struct comedi_device * dev)
    Initialization
 
 */
-static int pcl816_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int pcl816_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int ret;
 	unsigned long iobase;
 	unsigned int irq, dma;
 	unsigned long pages;
-	//int i;
+	/* int i; */
 	struct comedi_subdevice *s;
 
 	/* claim our I/O space */
@@ -1030,18 +1030,19 @@ static int pcl816_attach(struct comedi_device * dev, struct comedi_devconfig * i
 		this_board->name, iobase);
 
 	if (!request_region(iobase, this_board->io_range, "pcl816")) {
-		rt_printk("I/O port conflict\n");
+		printk("I/O port conflict\n");
 		return -EIO;
 	}
 
 	dev->iobase = iobase;
 
 	if (pcl816_check(iobase)) {
-		rt_printk(", I cann't detect board. FAIL!\n");
+		printk(", I cann't detect board. FAIL!\n");
 		return -EIO;
 	}
 
-	if ((ret = alloc_private(dev, sizeof(struct pcl816_private))) < 0)
+	ret = alloc_private(dev, sizeof(struct pcl816_private));
+	if (ret < 0)
 		return ret;	/* Can't alloc mem */
 
 	/* set up some name stuff */
@@ -1053,19 +1054,18 @@ static int pcl816_attach(struct comedi_device * dev, struct comedi_devconfig * i
 		irq = it->options[1];
 		if (irq) {	/* we want to use IRQ */
 			if (((1 << irq) & this_board->IRQbits) == 0) {
-				rt_printk
+				printk
 					(", IRQ %u is out of allowed range, DISABLING IT",
 					irq);
 				irq = 0;	/* Bad IRQ */
 			} else {
-				if (comedi_request_irq(irq, interrupt_pcl816, 0,
-						"pcl816", dev)) {
-					rt_printk
+				if (request_irq(irq, interrupt_pcl816, 0, "pcl816", dev)) {
+					printk
 						(", unable to allocate IRQ %u, DISABLING IT",
 						irq);
 					irq = 0;	/* Can't use IRQ */
 				} else {
-					rt_printk(", irq=%u", irq);
+					printk(", irq=%u", irq);
 				}
 			}
 		}
@@ -1084,7 +1084,7 @@ static int pcl816_attach(struct comedi_device * dev, struct comedi_devconfig * i
 #ifdef unused
 	/* grab RTC for DMA operations */
 	devpriv->dma_rtc = 0;
-	if (it->options[2] > 0) {	// we want to use DMA
+	if (it->options[2] > 0) {	/*  we want to use DMA */
 		if (RTC_lock == 0) {
 			if (!request_region(RTC_PORT(0), RTC_IO_EXTENT,
 					"pcl816 (RTC)"))
@@ -1094,12 +1094,11 @@ static int pcl816_attach(struct comedi_device * dev, struct comedi_devconfig * i
 		devpriv->rtc_iosize = RTC_IO_EXTENT;
 		RTC_lock++;
 #ifdef UNTESTED_CODE
-		if (!comedi_request_irq(RTC_IRQ,
-				interrupt_pcl816_ai_mode13_dma_rtc, 0,
+		if (!request_irq(RTC_IRQ, interrupt_pcl816_ai_mode13_dma_rtc, 0,
 				"pcl816 DMA (RTC)", dev)) {
 			devpriv->dma_rtc = 1;
 			devpriv->rtc_irq = RTC_IRQ;
-			rt_printk(", dma_irq=%u", devpriv->rtc_irq);
+			printk(", dma_irq=%u", devpriv->rtc_irq);
 		} else {
 			RTC_lock--;
 			if (RTC_lock == 0) {
@@ -1130,34 +1129,34 @@ static int pcl816_attach(struct comedi_device * dev, struct comedi_devconfig * i
 			goto no_dma;	/* DMA disabled */
 
 		if (((1 << dma) & this_board->DMAbits) == 0) {
-			rt_printk(", DMA is out of allowed range, FAIL!\n");
+			printk(", DMA is out of allowed range, FAIL!\n");
 			return -EINVAL;	/* Bad DMA */
 		}
 		ret = request_dma(dma, "pcl816");
 		if (ret) {
-			rt_printk(", unable to allocate DMA %u, FAIL!\n", dma);
+			printk(", unable to allocate DMA %u, FAIL!\n", dma);
 			return -EBUSY;	/* DMA isn't free */
 		}
 
 		devpriv->dma = dma;
-		rt_printk(", dma=%u", dma);
+		printk(", dma=%u", dma);
 		pages = 2;	/* we need 16KB */
 		devpriv->dmabuf[0] = __get_dma_pages(GFP_KERNEL, pages);
 
 		if (!devpriv->dmabuf[0]) {
-			rt_printk(", unable to allocate DMA buffer, FAIL!\n");
+			printk(", unable to allocate DMA buffer, FAIL!\n");
 			/* maybe experiment with try_to_free_pages() will help .... */
 			return -EBUSY;	/* no buffer :-( */
 		}
 		devpriv->dmapages[0] = pages;
 		devpriv->hwdmaptr[0] = virt_to_bus((void *)devpriv->dmabuf[0]);
 		devpriv->hwdmasize[0] = (1 << pages) * PAGE_SIZE;
-		//rt_printk("%d %d %ld, ",devpriv->dmapages[0],devpriv->hwdmasize[0],PAGE_SIZE);
+		/* printk("%d %d %ld, ",devpriv->dmapages[0],devpriv->hwdmasize[0],PAGE_SIZE); */
 
-		if (devpriv->dma_rtc == 0) {	// we must do duble buff :-(
+		if (devpriv->dma_rtc == 0) {	/*  we must do duble buff :-( */
 			devpriv->dmabuf[1] = __get_dma_pages(GFP_KERNEL, pages);
 			if (!devpriv->dmabuf[1]) {
-				rt_printk
+				printk
 					(", unable to allocate DMA buffer, FAIL!\n");
 				return -EBUSY;
 			}
@@ -1177,7 +1176,9 @@ static int pcl816_attach(struct comedi_device * dev, struct comedi_devconfig * i
   if (this_board->n_dochan > 0)
     subdevs[3] = COMEDI_SUBD_DO;
 */
-	if ((ret = alloc_subdevices(dev, 1)) < 0)
+
+	ret = alloc_subdevices(dev, 1);
+	if (ret < 0)
 		return ret;
 
 	s = dev->subdevices + 0;
@@ -1188,7 +1189,7 @@ static int pcl816_attach(struct comedi_device * dev, struct comedi_devconfig * i
 		s->subdev_flags = SDF_READABLE | SDF_CMD_READ;
 		s->n_chan = this_board->n_aichan;
 		s->subdev_flags |= SDF_DIFF;
-		//printk (", %dchans DIFF DAC - %d", s->n_chan, i);
+		/* printk (", %dchans DIFF DAC - %d", s->n_chan, i); */
 		s->maxdata = this_board->ai_maxdata;
 		s->len_chanlist = this_board->ai_chanlist;
 		s->range_table = this_board->ai_range_type;
@@ -1229,7 +1230,7 @@ case COMEDI_SUBD_DO:
 
 	pcl816_reset(dev);
 
-	rt_printk("\n");
+	printk("\n");
 
 	return 0;
 }
@@ -1238,9 +1239,9 @@ case COMEDI_SUBD_DO:
 ==============================================================================
   Removes device
  */
-static int pcl816_detach(struct comedi_device * dev)
+static int pcl816_detach(struct comedi_device *dev)
 {
-	DEBUG(rt_printk("comedi%d: pcl816: remove\n", dev->minor);
+	DEBUG(printk("comedi%d: pcl816: remove\n", dev->minor);
 		)
 		free_resources(dev);
 #ifdef unused
diff --git a/drivers/staging/comedi/drivers/pcl818.c b/drivers/staging/comedi/drivers/pcl818.c
index 43a9d56c6a4..039a77a6645 100644
--- a/drivers/staging/comedi/drivers/pcl818.c
+++ b/drivers/staging/comedi/drivers/pcl818.c
@@ -107,9 +107,9 @@ A word or two about DMA. Driver support DMA operations at two ways:
 
 #include "8253.h"
 
-// #define PCL818_MODE13_AO 1
+/* #define PCL818_MODE13_AO 1 */
 
-// boards constants
+/* boards constants */
 
 #define boardPCL818L 0
 #define boardPCL818H 1
@@ -118,60 +118,60 @@ A word or two about DMA. Driver support DMA operations at two ways:
 #define boardPCL818 4
 #define boardPCL718 5
 
-// IO space len
+/* IO space len */
 #define PCLx1x_RANGE 16
-// IO space len if we use FIFO
+/* IO space len if we use FIFO */
 #define PCLx1xFIFO_RANGE 32
 
-// W: clear INT request
+/* W: clear INT request */
 #define PCL818_CLRINT 8
-// R: return status byte
+/* R: return status byte */
 #define PCL818_STATUS 8
-// R: A/D high byte W: A/D range control
+/* R: A/D high byte W: A/D range control */
 #define PCL818_RANGE 1
-// R: next mux scan channel W: mux scan channel & range control pointer
+/* R: next mux scan channel W: mux scan channel & range control pointer */
 #define PCL818_MUX 2
-// R/W: operation control register
+/* R/W: operation control register */
 #define PCL818_CONTROL 9
-// W: counter enable
+/* W: counter enable */
 #define PCL818_CNTENABLE 10
 
-// R: low byte of A/D W: soft A/D trigger
+/* R: low byte of A/D W: soft A/D trigger */
 #define PCL818_AD_LO 0
-// R: high byte of A/D W: A/D range control
+/* R: high byte of A/D W: A/D range control */
 #define PCL818_AD_HI 1
-// W: D/A low&high byte
+/* W: D/A low&high byte */
 #define PCL818_DA_LO 4
 #define PCL818_DA_HI 5
-// R: low&high byte of DI
+/* R: low&high byte of DI */
 #define PCL818_DI_LO 3
 #define PCL818_DI_HI 11
-// W: low&high byte of DO
+/* W: low&high byte of DO */
 #define PCL818_DO_LO 3
 #define PCL818_DO_HI 11
-// W: PCL718 second D/A
+/* W: PCL718 second D/A */
 #define PCL718_DA2_LO 6
 #define PCL718_DA2_HI 7
-// counters
+/* counters */
 #define PCL818_CTR0 12
 #define PCL818_CTR1 13
 #define PCL818_CTR2 14
-// W: counter control
+/* W: counter control */
 #define PCL818_CTRCTL 15
 
-// W: fifo enable/disable
+/* W: fifo enable/disable */
 #define PCL818_FI_ENABLE 6
-// W: fifo interrupt clear
+/* W: fifo interrupt clear */
 #define PCL818_FI_INTCLR 20
-// W: fifo interrupt clear
+/* W: fifo interrupt clear */
 #define PCL818_FI_FLUSH 25
-// R: fifo status
+/* R: fifo status */
 #define PCL818_FI_STATUS 25
-// R: one record from FIFO
+/* R: one record from FIFO */
 #define PCL818_FI_DATALO 23
 #define PCL818_FI_DATAHI 23
 
-// type of interrupt handler
+/* type of interrupt handler */
 #define INT_TYPE_AI1_INT 1
 #define INT_TYPE_AI1_DMA 2
 #define INT_TYPE_AI1_FIFO 3
@@ -184,7 +184,7 @@ A word or two about DMA. Driver support DMA operations at two ways:
 #endif
 
 #ifdef unused
-// RTC stuff...
+/* RTC stuff... */
 #define INT_TYPE_AI1_DMA_RTC 9
 #define INT_TYPE_AI3_DMA_RTC 10
 
@@ -244,8 +244,8 @@ static const struct comedi_lrange range718_bipolar0_5 = { 1, {BIP_RANGE(0.5),} }
 static const struct comedi_lrange range718_unipolar2 = { 1, {UNI_RANGE(2),} };
 static const struct comedi_lrange range718_unipolar1 = { 1, {BIP_RANGE(1),} };
 
-static int pcl818_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int pcl818_detach(struct comedi_device * dev);
+static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int pcl818_detach(struct comedi_device *dev);
 
 #ifdef unused
 static int RTC_lock = 0;	/* RTC lock */
@@ -254,22 +254,22 @@ static int RTC_timer_lock = 0;	/* RTC int lock */
 
 struct pcl818_board {
 
-	const char *name;	// driver name
-	int n_ranges;		// len of range list
-	int n_aichan_se;	// num of A/D chans in single ended  mode
-	int n_aichan_diff;	// num of A/D chans in diferencial mode
-	unsigned int ns_min;	// minimal alllowed delay between samples (in ns)
-	int n_aochan;		// num of D/A chans
-	int n_dichan;		// num of DI chans
-	int n_dochan;		// num of DO chans
-	const struct comedi_lrange *ai_range_type;	// default A/D rangelist
-	const struct comedi_lrange *ao_range_type;	// default D/A rangelist
-	unsigned int io_range;	// len of IO space
-	unsigned int IRQbits;	// allowed interrupts
-	unsigned int DMAbits;	// allowed DMA chans
-	int ai_maxdata;		// maxdata for A/D
-	int ao_maxdata;		// maxdata for D/A
-	unsigned char fifo;	// 1=board has FIFO
+	const char *name;	/*  driver name */
+	int n_ranges;		/*  len of range list */
+	int n_aichan_se;	/*  num of A/D chans in single ended  mode */
+	int n_aichan_diff;	/*  num of A/D chans in diferencial mode */
+	unsigned int ns_min;	/*  minimal alllowed delay between samples (in ns) */
+	int n_aochan;		/*  num of D/A chans */
+	int n_dichan;		/*  num of DI chans */
+	int n_dochan;		/*  num of DO chans */
+	const struct comedi_lrange *ai_range_type;	/*  default A/D rangelist */
+	const struct comedi_lrange *ao_range_type;	/*  default D/A rangelist */
+	unsigned int io_range;	/*  len of IO space */
+	unsigned int IRQbits;	/*  allowed interrupts */
+	unsigned int DMAbits;	/*  allowed DMA chans */
+	int ai_maxdata;		/*  maxdata for A/D */
+	int ao_maxdata;		/*  maxdata for D/A */
+	unsigned char fifo;	/*  1=board has FIFO */
 	int is_818;
 };
 
@@ -302,67 +302,67 @@ static const struct pcl818_board boardtypes[] = {
 #define n_boardtypes (sizeof(boardtypes)/sizeof(struct pcl818_board))
 
 static struct comedi_driver driver_pcl818 = {
-      driver_name:"pcl818",
-      module:THIS_MODULE,
-      attach:pcl818_attach,
-      detach:pcl818_detach,
-      board_name:&boardtypes[0].name,
-      num_names:n_boardtypes,
-      offset:sizeof(struct pcl818_board),
+	.driver_name = "pcl818",
+	.module = THIS_MODULE,
+	.attach = pcl818_attach,
+	.detach = pcl818_detach,
+	.board_name = &boardtypes[0].name,
+	.num_names = n_boardtypes,
+	.offset = sizeof(struct pcl818_board),
 };
 
 COMEDI_INITCLEANUP(driver_pcl818);
 
 struct pcl818_private {
 
-	unsigned int dma;	// used DMA, 0=don't use DMA
-	int dma_rtc;		// 1=RTC used with DMA, 0=no RTC alloc
+	unsigned int dma;	/*  used DMA, 0=don't use DMA */
+	int dma_rtc;		/*  1=RTC used with DMA, 0=no RTC alloc */
 	unsigned int io_range;
 #ifdef unused
-	unsigned long rtc_iobase;	// RTC port region
+	unsigned long rtc_iobase;	/*  RTC port region */
 	unsigned int rtc_iosize;
 	unsigned int rtc_irq;
-	struct timer_list rtc_irq_timer;	// timer for RTC sanity check
-	unsigned long rtc_freq;	// RTC int freq
-	int rtc_irq_blocked;	// 1=we now do AI with DMA&RTC
+	struct timer_list rtc_irq_timer;	/*  timer for RTC sanity check */
+	unsigned long rtc_freq;	/*  RTC int freq */
+	int rtc_irq_blocked;	/*  1=we now do AI with DMA&RTC */
 #endif
-	unsigned long dmabuf[2];	// pointers to begin of DMA buffers
-	unsigned int dmapages[2];	// len of DMA buffers in PAGE_SIZEs
-	unsigned int hwdmaptr[2];	// hardware address of DMA buffers
-	unsigned int hwdmasize[2];	// len of DMA buffers in Bytes
-	unsigned int dmasamplsize;	// size in samples hwdmasize[0]/2
-	unsigned int last_top_dma;	// DMA pointer in last RTC int
-	int next_dma_buf;	// which DMA buffer will be used next round
-	long dma_runs_to_end;	// how many we must permorm DMA transfer to end of record
-	unsigned long last_dma_run;	// how many bytes we must transfer on last DMA page
-	unsigned char neverending_ai;	// if=1, then we do neverending record (you must use cancel())
-	unsigned int ns_min;	// manimal alllowed delay between samples (in us) for actual card
-	int i8253_osc_base;	// 1/frequency of on board oscilator in ns
-	int irq_free;		// 1=have allocated IRQ
-	int irq_blocked;	// 1=IRQ now uses any subdev
-	int irq_was_now_closed;	// when IRQ finish, there's stored int818_mode for last interrupt
-	int ai_mode;		// who now uses IRQ - 1=AI1 int, 2=AI1 dma, 3=AI3 int, 4AI3 dma
-	struct comedi_subdevice *last_int_sub;	// ptr to subdevice which now finish
-	int ai_act_scan;	// how many scans we finished
-	int ai_act_chan;	// actual position in actual scan
-	unsigned int act_chanlist[16];	// MUX setting for actual AI operations
-	unsigned int act_chanlist_len;	// how long is actual MUX list
-	unsigned int act_chanlist_pos;	// actual position in MUX list
-	unsigned int ai_scans;	// len of scanlist
-	unsigned int ai_n_chan;	// how many channels is measured
-	unsigned int *ai_chanlist;	// actaul chanlist
-	unsigned int ai_flags;	// flaglist
-	unsigned int ai_data_len;	// len of data buffer
-	short *ai_data;	// data buffer
-	unsigned int ai_timer1;	// timers
+	unsigned long dmabuf[2];	/*  pointers to begin of DMA buffers */
+	unsigned int dmapages[2];	/*  len of DMA buffers in PAGE_SIZEs */
+	unsigned int hwdmaptr[2];	/*  hardware address of DMA buffers */
+	unsigned int hwdmasize[2];	/*  len of DMA buffers in Bytes */
+	unsigned int dmasamplsize;	/*  size in samples hwdmasize[0]/2 */
+	unsigned int last_top_dma;	/*  DMA pointer in last RTC int */
+	int next_dma_buf;	/*  which DMA buffer will be used next round */
+	long dma_runs_to_end;	/*  how many we must permorm DMA transfer to end of record */
+	unsigned long last_dma_run;	/*  how many bytes we must transfer on last DMA page */
+	unsigned char neverending_ai;	/*  if=1, then we do neverending record (you must use cancel()) */
+	unsigned int ns_min;	/*  manimal alllowed delay between samples (in us) for actual card */
+	int i8253_osc_base;	/*  1/frequency of on board oscilator in ns */
+	int irq_free;		/*  1=have allocated IRQ */
+	int irq_blocked;	/*  1=IRQ now uses any subdev */
+	int irq_was_now_closed;	/*  when IRQ finish, there's stored int818_mode for last interrupt */
+	int ai_mode;		/*  who now uses IRQ - 1=AI1 int, 2=AI1 dma, 3=AI3 int, 4AI3 dma */
+	struct comedi_subdevice *last_int_sub;	/*  ptr to subdevice which now finish */
+	int ai_act_scan;	/*  how many scans we finished */
+	int ai_act_chan;	/*  actual position in actual scan */
+	unsigned int act_chanlist[16];	/*  MUX setting for actual AI operations */
+	unsigned int act_chanlist_len;	/*  how long is actual MUX list */
+	unsigned int act_chanlist_pos;	/*  actual position in MUX list */
+	unsigned int ai_scans;	/*  len of scanlist */
+	unsigned int ai_n_chan;	/*  how many channels is measured */
+	unsigned int *ai_chanlist;	/*  actaul chanlist */
+	unsigned int ai_flags;	/*  flaglist */
+	unsigned int ai_data_len;	/*  len of data buffer */
+	short *ai_data;	/*  data buffer */
+	unsigned int ai_timer1;	/*  timers */
 	unsigned int ai_timer2;
-	struct comedi_subdevice *sub_ai;	// ptr to AI subdevice
-	unsigned char usefifo;	// 1=use fifo
+	struct comedi_subdevice *sub_ai;	/*  ptr to AI subdevice */
+	unsigned char usefifo;	/*  1=use fifo */
 	unsigned int ao_readback[2];
 };
 
 
-static const unsigned int muxonechan[] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77,	// used for gain list programming
+static const unsigned int muxonechan[] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77,	/*  used for gain list programming */
 	0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff
 };
 
@@ -372,13 +372,13 @@ static const unsigned int muxonechan[] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0
 /*
 ==============================================================================
 */
-static void setup_channel_list(struct comedi_device * dev, struct comedi_subdevice * s,
+static void setup_channel_list(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int *chanlist, unsigned int n_chan, unsigned int seglen);
-static int check_channel_list(struct comedi_device * dev, struct comedi_subdevice * s,
+static int check_channel_list(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int *chanlist, unsigned int n_chan);
 
-static int pcl818_ai_cancel(struct comedi_device * dev, struct comedi_subdevice * s);
-static void start_pacer(struct comedi_device * dev, int mode, unsigned int divisor1,
+static int pcl818_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
+static void start_pacer(struct comedi_device *dev, int mode, unsigned int divisor1,
 	unsigned int divisor2);
 
 #ifdef unused
@@ -391,8 +391,8 @@ static int rtc_setfreq_irq(int freq);
 ==============================================================================
    ANALOG INPUT MODE0, 818 cards, slow version
 */
-static int pcl818_ai_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcl818_ai_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n;
 	int timeout;
@@ -418,7 +418,7 @@ static int pcl818_ai_insn_read(struct comedi_device * dev, struct comedi_subdevi
 		while (timeout--) {
 			if (inb(dev->iobase + PCL818_STATUS) & 0x10)
 				goto conv_finish;
-			comedi_udelay(1);
+			udelay(1);
 		}
 		comedi_error(dev, "A/D insn timeout");
 		/* clear INT (conversion end) flag */
@@ -438,8 +438,8 @@ static int pcl818_ai_insn_read(struct comedi_device * dev, struct comedi_subdevi
    ANALOG OUTPUT MODE0, 818 cards
    only one sample per call is supported
 */
-static int pcl818_ao_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcl818_ao_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n;
 	int chan = CR_CHAN(insn->chanspec);
@@ -451,8 +451,8 @@ static int pcl818_ao_insn_read(struct comedi_device * dev, struct comedi_subdevi
 	return n;
 }
 
-static int pcl818_ao_insn_write(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcl818_ao_insn_write(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n;
 	int chan = CR_CHAN(insn->chanspec);
@@ -460,9 +460,9 @@ static int pcl818_ao_insn_write(struct comedi_device * dev, struct comedi_subdev
 	for (n = 0; n < insn->n; n++) {
 		devpriv->ao_readback[chan] = data[n];
 		outb((data[n] & 0x000f) << 4, dev->iobase +
-			(chan) ? PCL718_DA2_LO : PCL818_DA_LO);
+			(chan ? PCL718_DA2_LO : PCL818_DA_LO));
 		outb((data[n] & 0x0ff0) >> 4, dev->iobase +
-			(chan) ? PCL718_DA2_HI : PCL818_DA_HI);
+			(chan ? PCL718_DA2_HI : PCL818_DA_HI));
 	}
 
 	return n;
@@ -474,8 +474,8 @@ static int pcl818_ao_insn_write(struct comedi_device * dev, struct comedi_subdev
 
    only one sample per call is supported
 */
-static int pcl818_di_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcl818_di_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -492,8 +492,8 @@ static int pcl818_di_insn_bits(struct comedi_device * dev, struct comedi_subdevi
 
    only one sample per call is supported
 */
-static int pcl818_do_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcl818_do_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -524,7 +524,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_int(int irq, void *d)
 	while (timeout--) {
 		if (inb(dev->iobase + PCL818_STATUS) & 0x10)
 			goto conv_finish;
-		comedi_udelay(1);
+		udelay(1);
 	}
 	outb(0, dev->iobase + PCL818_STATUS);	/* clear INT request */
 	comedi_error(dev, "A/D mode1/3 IRQ without DRDY!");
@@ -535,11 +535,11 @@ static irqreturn_t interrupt_pcl818_ai_mode13_int(int irq, void *d)
 
       conv_finish:
 	low = inb(dev->iobase + PCL818_AD_LO);
-	comedi_buf_put(s->async, ((inb(dev->iobase + PCL818_AD_HI) << 4) | (low >> 4)));	// get one sample
+	comedi_buf_put(s->async, ((inb(dev->iobase + PCL818_AD_HI) << 4) | (low >> 4)));	/*  get one sample */
 	outb(0, dev->iobase + PCL818_CLRINT);	/* clear INT request */
 
-	if ((low & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) {	// dropout!
-		rt_printk
+	if ((low & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) {	/*  dropout! */
+		printk
 			("comedi: A/D mode1/3 IRQ - channel dropout %x!=%x !\n",
 			(low & 0xf),
 			devpriv->act_chanlist[devpriv->act_chanlist_pos]);
@@ -549,7 +549,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_int(int irq, void *d)
 		return IRQ_HANDLED;
 	}
 	if (s->async->cur_chan == 0) {
-		// rt_printk("E");
+		/*  printk("E"); */
 		devpriv->ai_act_scan--;
 	}
 
@@ -577,7 +577,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma(int irq, void *d)
 
 	disable_dma(devpriv->dma);
 	devpriv->next_dma_buf = 1 - devpriv->next_dma_buf;
-	if ((devpriv->dma_runs_to_end) > -1 || devpriv->neverending_ai) {	// switch dma bufs
+	if ((devpriv->dma_runs_to_end) > -1 || devpriv->neverending_ai) {	/*  switch dma bufs */
 		set_dma_mode(devpriv->dma, DMA_MODE_READ);
 		flags = claim_dma_lock();
 		set_dma_addr(devpriv->dma,
@@ -591,7 +591,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma(int irq, void *d)
 		release_dma_lock(flags);
 		enable_dma(devpriv->dma);
 	}
-	rt_printk("comedi: A/D mode1/3 IRQ \n");
+	printk("comedi: A/D mode1/3 IRQ \n");
 
 	devpriv->dma_runs_to_end--;
 	outb(0, dev->iobase + PCL818_CLRINT);	/* clear INT request */
@@ -601,8 +601,8 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma(int irq, void *d)
 	bufptr = 0;
 
 	for (i = 0; i < len; i++) {
-		if ((ptr[bufptr] & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) {	// dropout!
-			rt_printk
+		if ((ptr[bufptr] & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) {	/*  dropout! */
+			printk
 				("comedi: A/D mode1/3 DMA - channel dropout %d(card)!=%d(chanlist) at %d !\n",
 				(ptr[bufptr] & 0xf),
 				devpriv->act_chanlist[devpriv->
@@ -614,7 +614,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma(int irq, void *d)
 			return IRQ_HANDLED;
 		}
 
-		comedi_buf_put(s->async, ptr[bufptr++] >> 4);	// get one sample
+		comedi_buf_put(s->async, ptr[bufptr++] >> 4);	/*  get one sample */
 
 		devpriv->act_chanlist_pos++;
 		if (devpriv->act_chanlist_pos >= devpriv->act_chanlist_len) {
@@ -627,7 +627,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma(int irq, void *d)
 				pcl818_ai_cancel(dev, s);
 				s->async->events |= COMEDI_CB_EOA;
 				comedi_event(dev, s);
-				// printk("done int ai13 dma\n");
+				/*  printk("done int ai13 dma\n"); */
 				return IRQ_HANDLED;
 			}
 	}
@@ -651,7 +651,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma_rtc(int irq, void *d)
 	long ofs_dats;
 	short *dmabuf = (short *) devpriv->dmabuf[0];
 
-	//outb(2,0x378);
+	/* outb(2,0x378); */
 	switch (devpriv->ai_mode) {
 	case INT_TYPE_AI1_DMA_RTC:
 	case INT_TYPE_AI3_DMA_RTC:
@@ -668,32 +668,32 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma_rtc(int irq, void *d)
 
 		if (top1 != top2)
 			return IRQ_HANDLED;
-		top1 = devpriv->hwdmasize[0] - top1;	// where is now DMA in buffer
+		top1 = devpriv->hwdmasize[0] - top1;	/*  where is now DMA in buffer */
 		top1 >>= 1;
-		ofs_dats = top1 - devpriv->last_top_dma;	// new samples from last call
+		ofs_dats = top1 - devpriv->last_top_dma;	/*  new samples from last call */
 		if (ofs_dats < 0)
 			ofs_dats = (devpriv->dmasamplsize) + ofs_dats;
 		if (!ofs_dats)
-			return IRQ_HANDLED;	// exit=no new samples from last call
-		// obsluz data
+			return IRQ_HANDLED;	/*  exit=no new samples from last call */
+		/*  obsluz data */
 		i = devpriv->last_top_dma - 1;
 		i &= (devpriv->dmasamplsize - 1);
 
-		if (dmabuf[i] != MAGIC_DMA_WORD) {	// DMA overflow!
+		if (dmabuf[i] != MAGIC_DMA_WORD) {	/*  DMA overflow! */
 			comedi_error(dev, "A/D mode1/3 DMA buffer overflow!");
-			//rt_printk("I %d dmabuf[i] %d %d\n",i,dmabuf[i],devpriv->dmasamplsize);
+			/* printk("I %d dmabuf[i] %d %d\n",i,dmabuf[i],devpriv->dmasamplsize); */
 			pcl818_ai_cancel(dev, s);
 			s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
 			comedi_event(dev, s);
 			return IRQ_HANDLED;
 		}
-		//rt_printk("r %ld ",ofs_dats);
+		/* printk("r %ld ",ofs_dats); */
 
 		bufptr = devpriv->last_top_dma;
 
 		for (i = 0; i < ofs_dats; i++) {
-			if ((dmabuf[bufptr] & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) {	// dropout!
-				rt_printk
+			if ((dmabuf[bufptr] & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) {	/*  dropout! */
+				printk
 					("comedi: A/D mode1/3 DMA - channel dropout %d!=%d !\n",
 					(dmabuf[bufptr] & 0xf),
 					devpriv->act_chanlist[devpriv->
@@ -705,7 +705,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma_rtc(int irq, void *d)
 				return IRQ_HANDLED;
 			}
 
-			comedi_buf_put(s->async, dmabuf[bufptr++] >> 4);	// get one sample
+			comedi_buf_put(s->async, dmabuf[bufptr++] >> 4);	/*  get one sample */
 			bufptr &= (devpriv->dmasamplsize - 1);
 
 			if (s->async->cur_chan == 0) {
@@ -717,7 +717,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma_rtc(int irq, void *d)
 					pcl818_ai_cancel(dev, s);
 					s->async->events |= COMEDI_CB_EOA;
 					comedi_event(dev, s);
-					//printk("done int ai13 dma\n");
+					/* printk("done int ai13 dma\n"); */
 					return IRQ_HANDLED;
 				}
 		}
@@ -727,11 +727,11 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma_rtc(int irq, void *d)
 		bufptr &= (devpriv->dmasamplsize - 1);
 		dmabuf[bufptr] = MAGIC_DMA_WORD;
 		comedi_event(dev, s);
-		//outb(0,0x378);
+		/* outb(0,0x378); */
 		return IRQ_HANDLED;
 	}
 
-	//outb(0,0x378);
+	/* outb(0,0x378); */
 	return IRQ_HANDLED;
 }
 #endif
@@ -746,7 +746,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_fifo(int irq, void *d)
 	struct comedi_subdevice *s = dev->subdevices + 0;
 	int i, len, lo;
 
-	outb(0, dev->iobase + PCL818_FI_INTCLR);	// clear fifo int request
+	outb(0, dev->iobase + PCL818_FI_INTCLR);	/*  clear fifo int request */
 
 	lo = inb(dev->iobase + PCL818_FI_STATUS);
 
@@ -774,8 +774,8 @@ static irqreturn_t interrupt_pcl818_ai_mode13_fifo(int irq, void *d)
 
 	for (i = 0; i < len; i++) {
 		lo = inb(dev->iobase + PCL818_FI_DATALO);
-		if ((lo & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) {	// dropout!
-			rt_printk
+		if ((lo & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) {	/*  dropout! */
+			printk
 				("comedi: A/D mode1/3 FIFO - channel dropout %d!=%d !\n",
 				(lo & 0xf),
 				devpriv->act_chanlist[devpriv->
@@ -786,7 +786,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_fifo(int irq, void *d)
 			return IRQ_HANDLED;
 		}
 
-		comedi_buf_put(s->async, (lo >> 4) | (inb(dev->iobase + PCL818_FI_DATAHI) << 4));	// get one sample
+		comedi_buf_put(s->async, (lo >> 4) | (inb(dev->iobase + PCL818_FI_DATAHI) << 4));	/*  get one sample */
 
 		if (s->async->cur_chan == 0) {
 			devpriv->ai_act_scan--;
@@ -810,7 +810,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_fifo(int irq, void *d)
 ==============================================================================
     INT procedure
 */
-static irqreturn_t interrupt_pcl818(int irq, void *d PT_REGS_ARG)
+static irqreturn_t interrupt_pcl818(int irq, void *d)
 {
 	struct comedi_device *dev = d;
 
@@ -818,7 +818,28 @@ static irqreturn_t interrupt_pcl818(int irq, void *d PT_REGS_ARG)
 		comedi_error(dev, "premature interrupt");
 		return IRQ_HANDLED;
 	}
-	//rt_printk("I\n");
+	/* printk("I\n"); */
+
+	if (devpriv->irq_blocked && devpriv->irq_was_now_closed) {
+		if ((devpriv->neverending_ai || (!devpriv->neverending_ai &&
+						devpriv->ai_act_scan > 0)) &&
+				(devpriv->ai_mode == INT_TYPE_AI1_DMA ||
+				 devpriv->ai_mode == INT_TYPE_AI3_DMA)) {
+			/* The cleanup from ai_cancel() has been delayed
+			   until now because the card doesn't seem to like
+			   being reprogrammed while a DMA transfer is in
+			   progress.
+			 */
+			struct comedi_subdevice *s = dev->subdevices + 0;
+			devpriv->ai_act_scan = 0;
+			devpriv->neverending_ai = 0;
+			pcl818_ai_cancel(dev, s);
+		}
+
+		outb(0, dev->iobase + PCL818_CLRINT);	/* clear INT request */
+
+		return IRQ_HANDLED;
+	}
 
 	switch (devpriv->ai_mode) {
 	case INT_TYPE_AI1_DMA:
@@ -843,25 +864,6 @@ static irqreturn_t interrupt_pcl818(int irq, void *d PT_REGS_ARG)
 
 	if ((!dev->irq) || (!devpriv->irq_free) || (!devpriv->irq_blocked)
 		|| (!devpriv->ai_mode)) {
-		if (devpriv->irq_was_now_closed) {
-			if (devpriv->neverending_ai &&
-				(devpriv->ai_mode == INT_TYPE_AI1_DMA
-					|| devpriv->ai_mode ==
-					INT_TYPE_AI3_DMA)) {
-				/* we had neverending ai but ai_cancel() has been called
-				   the cleanup from ai_cancel() has been delayed until know
-				   because the card doesn't seem to like being reprogrammed
-				   while a DMA transfer is in progress
-				 */
-				struct comedi_subdevice *s = dev->subdevices + 0;
-				devpriv->ai_mode = devpriv->irq_was_now_closed;
-				devpriv->irq_was_now_closed = 0;
-				devpriv->neverending_ai = 0;
-				pcl818_ai_cancel(dev, s);
-			}
-			devpriv->irq_was_now_closed = 0;
-			return IRQ_HANDLED;
-		}
 		comedi_error(dev, "bad IRQ!");
 		return IRQ_NONE;
 	}
@@ -874,19 +876,19 @@ static irqreturn_t interrupt_pcl818(int irq, void *d PT_REGS_ARG)
 ==============================================================================
    ANALOG INPUT MODE 1 or 3 DMA , 818 cards
 */
-static void pcl818_ai_mode13dma_int(int mode, struct comedi_device * dev,
-	struct comedi_subdevice * s)
+static void pcl818_ai_mode13dma_int(int mode, struct comedi_device *dev,
+	struct comedi_subdevice *s)
 {
 	unsigned int flags;
 	unsigned int bytes;
 
-	rt_printk("mode13dma_int, mode: %d\n", mode);
-	disable_dma(devpriv->dma);	// disable dma
+	printk("mode13dma_int, mode: %d\n", mode);
+	disable_dma(devpriv->dma);	/*  disable dma */
 	bytes = devpriv->hwdmasize[0];
 	if (!devpriv->neverending_ai) {
-		bytes = devpriv->ai_n_chan * devpriv->ai_scans * sizeof(short);	// how many
-		devpriv->dma_runs_to_end = bytes / devpriv->hwdmasize[0];	// how many DMA pages we must fiil
-		devpriv->last_dma_run = bytes % devpriv->hwdmasize[0];	//on last dma transfer must be moved
+		bytes = devpriv->ai_n_chan * devpriv->ai_scans * sizeof(short);	/*  how many */
+		devpriv->dma_runs_to_end = bytes / devpriv->hwdmasize[0];	/*  how many DMA pages we must fiil */
+		devpriv->last_dma_run = bytes % devpriv->hwdmasize[0];	/* on last dma transfer must be moved */
 		devpriv->dma_runs_to_end--;
 		if (devpriv->dma_runs_to_end >= 0)
 			bytes = devpriv->hwdmasize[0];
@@ -915,8 +917,8 @@ static void pcl818_ai_mode13dma_int(int mode, struct comedi_device * dev,
 ==============================================================================
    ANALOG INPUT MODE 1 or 3 DMA rtc, 818 cards
 */
-static void pcl818_ai_mode13dma_rtc(int mode, struct comedi_device * dev,
-	struct comedi_subdevice * s)
+static void pcl818_ai_mode13dma_rtc(int mode, struct comedi_device *dev,
+	struct comedi_subdevice *s)
 {
 	unsigned int flags;
 	short *pole;
@@ -928,7 +930,7 @@ static void pcl818_ai_mode13dma_rtc(int mode, struct comedi_device * dev,
 	set_dma_count(devpriv->dma, devpriv->hwdmasize[0]);
 	release_dma_lock(flags);
 	enable_dma(devpriv->dma);
-	devpriv->last_top_dma = 0;	//devpriv->hwdmasize[0];
+	devpriv->last_top_dma = 0;	/* devpriv->hwdmasize[0]; */
 	pole = (short *) devpriv->dmabuf[0];
 	devpriv->dmasamplsize = devpriv->hwdmasize[0] / 2;
 	pole[devpriv->dmasamplsize - 1] = MAGIC_DMA_WORD;
@@ -956,14 +958,14 @@ static void pcl818_ai_mode13dma_rtc(int mode, struct comedi_device * dev,
 ==============================================================================
    ANALOG INPUT MODE 1 or 3, 818 cards
 */
-static int pcl818_ai_cmd_mode(int mode, struct comedi_device * dev,
-	struct comedi_subdevice * s)
+static int pcl818_ai_cmd_mode(int mode, struct comedi_device *dev,
+	struct comedi_subdevice *s)
 {
 	struct comedi_cmd *cmd = &s->async->cmd;
 	int divisor1, divisor2;
 	unsigned int seglen;
 
-	rt_printk("pcl818_ai_cmd_mode()\n");
+	printk("pcl818_ai_cmd_mode()\n");
 	if ((!dev->irq) && (!devpriv->dma_rtc)) {
 		comedi_error(dev, "IRQ not defined!");
 		return -EINVAL;
@@ -972,7 +974,7 @@ static int pcl818_ai_cmd_mode(int mode, struct comedi_device * dev,
 	if (devpriv->irq_blocked)
 		return -EBUSY;
 
-	start_pacer(dev, -1, 0, 0);	// stop pacer
+	start_pacer(dev, -1, 0, 0);	/*  stop pacer */
 
 	seglen = check_channel_list(dev, s, devpriv->ai_chanlist,
 		devpriv->ai_n_chan);
@@ -981,7 +983,7 @@ static int pcl818_ai_cmd_mode(int mode, struct comedi_device * dev,
 	setup_channel_list(dev, s, devpriv->ai_chanlist,
 		devpriv->ai_n_chan, seglen);
 
-	comedi_udelay(1);
+	udelay(1);
 
 	devpriv->ai_act_scan = devpriv->ai_scans;
 	devpriv->ai_act_chan = 0;
@@ -992,7 +994,7 @@ static int pcl818_ai_cmd_mode(int mode, struct comedi_device * dev,
 	devpriv->dma_runs_to_end = 0;
 
 	if ((devpriv->ai_scans == 0) || (devpriv->ai_scans == -1))
-		devpriv->neverending_ai = 1;	//well, user want neverending
+		devpriv->neverending_ai = 1;	/* well, user want neverending */
 
 	if (mode == 1) {
 		i8253_cascade_ns_to_timer(devpriv->i8253_osc_base, &divisor1,
@@ -1010,7 +1012,7 @@ static int pcl818_ai_cmd_mode(int mode, struct comedi_device * dev,
 	outb(0, dev->iobase + PCL818_CNTENABLE);	/* enable pacer */
 
 	switch (devpriv->dma) {
-	case 1:		// DMA
+	case 1:		/*  DMA */
 	case 3:
 		if (devpriv->dma_rtc == 0) {
 			pcl818_ai_mode13dma_int(mode, dev, s);
@@ -1025,26 +1027,32 @@ static int pcl818_ai_cmd_mode(int mode, struct comedi_device * dev,
 		}
 #endif
 		break;
-	case 0:		// IRQ
-		// rt_printk("IRQ\n");
-		if (mode == 1) {
-			devpriv->ai_mode = INT_TYPE_AI1_INT;
-			outb(0x83 | (dev->irq << 4), dev->iobase + PCL818_CONTROL);	/* Pacer+IRQ */
-		} else {
-			devpriv->ai_mode = INT_TYPE_AI3_INT;
-			outb(0x82 | (dev->irq << 4), dev->iobase + PCL818_CONTROL);	/* Ext trig+IRQ */
-		};
-		break;
-	case -1:		// FIFO
-		outb(1, dev->iobase + PCL818_FI_ENABLE);	// enable FIFO
-		if (mode == 1) {
-			devpriv->ai_mode = INT_TYPE_AI1_FIFO;
-			outb(0x03, dev->iobase + PCL818_CONTROL);	/* Pacer */
+	case 0:
+		if (!devpriv->usefifo) {
+			/* IRQ */
+			/* printk("IRQ\n"); */
+			if (mode == 1) {
+				devpriv->ai_mode = INT_TYPE_AI1_INT;
+				/* Pacer+IRQ */
+				outb(0x83 | (dev->irq << 4), dev->iobase + PCL818_CONTROL);
+			} else {
+				devpriv->ai_mode = INT_TYPE_AI3_INT;
+				/* Ext trig+IRQ */
+				outb(0x82 | (dev->irq << 4), dev->iobase + PCL818_CONTROL);
+			}
 		} else {
-			devpriv->ai_mode = INT_TYPE_AI3_FIFO;
-			outb(0x02, dev->iobase + PCL818_CONTROL);
-		};		/* Ext trig */
-		break;
+			/* FIFO */
+			/* enable FIFO */
+			outb(1, dev->iobase + PCL818_FI_ENABLE);
+			if (mode == 1) {
+				devpriv->ai_mode = INT_TYPE_AI1_FIFO;
+				/* Pacer */
+				outb(0x03, dev->iobase + PCL818_CONTROL);
+			} else {
+				devpriv->ai_mode = INT_TYPE_AI3_FIFO;
+				outb(0x02, dev->iobase + PCL818_CONTROL);
+			}
+		}
 	}
 
 	start_pacer(dev, mode, divisor1, divisor2);
@@ -1057,7 +1065,7 @@ static int pcl818_ai_cmd_mode(int mode, struct comedi_device * dev,
 		break;
 	}
 #endif
-	rt_printk("pcl818_ai_cmd_mode() end\n");
+	printk("pcl818_ai_cmd_mode() end\n");
 	return 0;
 }
 
@@ -1067,8 +1075,8 @@ static int pcl818_ai_cmd_mode(int mode, struct comedi_device * dev,
    ANALOG OUTPUT MODE 1 or 3, 818 cards
 */
 #ifdef PCL818_MODE13_AO
-static int pcl818_ao_mode13(int mode, struct comedi_device * dev, struct comedi_subdevice * s,
-	comedi_trig * it)
+static int pcl818_ao_mode13(int mode, struct comedi_device *dev, struct comedi_subdevice *s,
+	comedi_trig *it)
 {
 	int divisor1, divisor2;
 
@@ -1080,7 +1088,7 @@ static int pcl818_ao_mode13(int mode, struct comedi_device * dev, struct comedi_
 	if (devpriv->irq_blocked)
 		return -EBUSY;
 
-	start_pacer(dev, -1, 0, 0);	// stop pacer
+	start_pacer(dev, -1, 0, 0);	/*  stop pacer */
 
 	devpriv->int13_act_scan = it->n;
 	devpriv->int13_act_chan = 0;
@@ -1120,8 +1128,8 @@ static int pcl818_ao_mode13(int mode, struct comedi_device * dev, struct comedi_
 ==============================================================================
    ANALOG OUTPUT MODE 1, 818 cards
 */
-static int pcl818_ao_mode1(struct comedi_device * dev, struct comedi_subdevice * s,
-	comedi_trig * it)
+static int pcl818_ao_mode1(struct comedi_device *dev, struct comedi_subdevice *s,
+	comedi_trig *it)
 {
 	return pcl818_ao_mode13(1, dev, s, it);
 }
@@ -1130,8 +1138,8 @@ static int pcl818_ao_mode1(struct comedi_device * dev, struct comedi_subdevice *
 ==============================================================================
    ANALOG OUTPUT MODE 3, 818 cards
 */
-static int pcl818_ao_mode3(struct comedi_device * dev, struct comedi_subdevice * s,
-	comedi_trig * it)
+static int pcl818_ao_mode3(struct comedi_device *dev, struct comedi_subdevice *s,
+	comedi_trig *it)
 {
 	return pcl818_ao_mode13(3, dev, s, it);
 }
@@ -1142,12 +1150,12 @@ static int pcl818_ao_mode3(struct comedi_device * dev, struct comedi_subdevice *
 ==============================================================================
  Start/stop pacer onboard pacer
 */
-static void start_pacer(struct comedi_device * dev, int mode, unsigned int divisor1,
+static void start_pacer(struct comedi_device *dev, int mode, unsigned int divisor1,
 	unsigned int divisor2)
 {
 	outb(0xb4, dev->iobase + PCL818_CTRCTL);
 	outb(0x74, dev->iobase + PCL818_CTRCTL);
-	comedi_udelay(1);
+	udelay(1);
 
 	if (mode == 1) {
 		outb(divisor2 & 0xff, dev->iobase + PCL818_CTR2);
@@ -1162,7 +1170,7 @@ static void start_pacer(struct comedi_device * dev, int mode, unsigned int divis
  Check if channel list from user is builded correctly
  If it's ok, then program scan/gain logic
 */
-static int check_channel_list(struct comedi_device * dev, struct comedi_subdevice * s,
+static int check_channel_list(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int *chanlist, unsigned int n_chan)
 {
 	unsigned int chansegment[16];
@@ -1175,32 +1183,36 @@ static int check_channel_list(struct comedi_device * dev, struct comedi_subdevic
 	}
 
 	if (n_chan > 1) {
-		// first channel is everytime ok
+		/*  first channel is everytime ok */
 		chansegment[0] = chanlist[0];
-		// build part of chanlist
+		/*  build part of chanlist */
 		for (i = 1, seglen = 1; i < n_chan; i++, seglen++) {
-			// rt_printk("%d. %d %d\n",i,CR_CHAN(it->chanlist[i]),CR_RANGE(it->chanlist[i]));
-			// we detect loop, this must by finish
+
+			/* printk("%d. %d * %d\n",i,
+			 * CR_CHAN(it->chanlist[i]),CR_RANGE(it->chanlist[i]));*/
+
+			/* we detect loop, this must by finish */
+
 			if (chanlist[0] == chanlist[i])
 				break;
 			nowmustbechan =
 				(CR_CHAN(chansegment[i - 1]) + 1) % s->n_chan;
-			if (nowmustbechan != CR_CHAN(chanlist[i])) {	// channel list isn't continous :-(
-				rt_printk
+			if (nowmustbechan != CR_CHAN(chanlist[i])) {	/*  channel list isn't continous :-( */
+				printk
 					("comedi%d: pcl818: channel list must be continous! chanlist[%i]=%d but must be %d or %d!\n",
 					dev->minor, i, CR_CHAN(chanlist[i]),
 					nowmustbechan, CR_CHAN(chanlist[0]));
 				return 0;
 			}
-			// well, this is next correct channel in list
+			/*  well, this is next correct channel in list */
 			chansegment[i] = chanlist[i];
 		}
 
-		// check whole chanlist
+		/*  check whole chanlist */
 		for (i = 0, segpos = 0; i < n_chan; i++) {
-			//rt_printk("%d %d=%d %d\n",CR_CHAN(chansegment[i%seglen]),CR_RANGE(chansegment[i%seglen]),CR_CHAN(it->chanlist[i]),CR_RANGE(it->chanlist[i]));
+			/* printk("%d %d=%d %d\n",CR_CHAN(chansegment[i%seglen]),CR_RANGE(chansegment[i%seglen]),CR_CHAN(it->chanlist[i]),CR_RANGE(it->chanlist[i])); */
 			if (chanlist[i] != chansegment[i % seglen]) {
-				rt_printk
+				printk
 					("comedi%d: pcl818: bad channel or range number! chanlist[%i]=%d,%d,%d and not %d,%d,%d!\n",
 					dev->minor, i, CR_CHAN(chansegment[i]),
 					CR_RANGE(chansegment[i]),
@@ -1208,17 +1220,17 @@ static int check_channel_list(struct comedi_device * dev, struct comedi_subdevic
 					CR_CHAN(chanlist[i % seglen]),
 					CR_RANGE(chanlist[i % seglen]),
 					CR_AREF(chansegment[i % seglen]));
-				return 0;	// chan/gain list is strange
+				return 0;	/*  chan/gain list is strange */
 			}
 		}
 	} else {
 		seglen = 1;
 	}
-	rt_printk("check_channel_list: seglen %d\n", seglen);
+	printk("check_channel_list: seglen %d\n", seglen);
 	return seglen;
 }
 
-static void setup_channel_list(struct comedi_device * dev, struct comedi_subdevice * s,
+static void setup_channel_list(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int *chanlist, unsigned int n_chan, unsigned int seglen)
 {
 	int i;
@@ -1226,13 +1238,13 @@ static void setup_channel_list(struct comedi_device * dev, struct comedi_subdevi
 	devpriv->act_chanlist_len = seglen;
 	devpriv->act_chanlist_pos = 0;
 
-	for (i = 0; i < seglen; i++) {	// store range list to card
+	for (i = 0; i < seglen; i++) {	/*  store range list to card */
 		devpriv->act_chanlist[i] = CR_CHAN(chanlist[i]);
 		outb(muxonechan[CR_CHAN(chanlist[i])], dev->iobase + PCL818_MUX);	/* select channel */
 		outb(CR_RANGE(chanlist[i]), dev->iobase + PCL818_RANGE);	/* select gain */
 	}
 
-	comedi_udelay(1);
+	udelay(1);
 
 	/* select channel interval to scan */
 	outb(devpriv->act_chanlist[0] | (devpriv->act_chanlist[seglen -
@@ -1255,8 +1267,8 @@ static int check_single_ended(unsigned int port)
 /*
 ==============================================================================
 */
-static int ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	int tmp, divisor1, divisor2;
@@ -1391,7 +1403,7 @@ static int ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
 	if (cmd->chanlist) {
 		if (!check_channel_list(dev, s, cmd->chanlist,
 				cmd->chanlist_len))
-			return 5;	// incorrect channels list
+			return 5;	/*  incorrect channels list */
 	}
 
 	return 0;
@@ -1400,12 +1412,12 @@ static int ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
 /*
 ==============================================================================
 */
-static int ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct comedi_cmd *cmd = &s->async->cmd;
 	int retval;
 
-	rt_printk("pcl818_ai_cmd()\n");
+	printk("pcl818_ai_cmd()\n");
 	devpriv->ai_n_chan = cmd->chanlist_len;
 	devpriv->ai_chanlist = cmd->chanlist;
 	devpriv->ai_flags = cmd->flags;
@@ -1420,14 +1432,14 @@ static int ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 		devpriv->ai_scans = 0;
 	}
 
-	if (cmd->scan_begin_src == TRIG_FOLLOW) {	// mode 1, 3
-		if (cmd->convert_src == TRIG_TIMER) {	// mode 1
+	if (cmd->scan_begin_src == TRIG_FOLLOW) {	/*  mode 1, 3 */
+		if (cmd->convert_src == TRIG_TIMER) {	/*  mode 1 */
 			devpriv->ai_timer1 = cmd->convert_arg;
 			retval = pcl818_ai_cmd_mode(1, dev, s);
-			rt_printk("pcl818_ai_cmd() end\n");
+			printk("pcl818_ai_cmd() end\n");
 			return retval;
 		}
-		if (cmd->convert_src == TRIG_EXT) {	// mode 3
+		if (cmd->convert_src == TRIG_EXT) {	/*  mode 3 */
 			return pcl818_ai_cmd_mode(3, dev, s);
 		}
 	}
@@ -1439,23 +1451,24 @@ static int ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 ==============================================================================
  cancel any mode 1-4 AI
 */
-static int pcl818_ai_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pcl818_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	if (devpriv->irq_blocked > 0) {
-		rt_printk("pcl818_ai_cancel()\n");
-		devpriv->irq_was_now_closed = devpriv->ai_mode;
-		devpriv->ai_mode = 0;
+		printk("pcl818_ai_cancel()\n");
+		devpriv->irq_was_now_closed = 1;
 
-		switch (devpriv->irq_was_now_closed) {
+		switch (devpriv->ai_mode) {
 #ifdef unused
 		case INT_TYPE_AI1_DMA_RTC:
 		case INT_TYPE_AI3_DMA_RTC:
-			set_rtc_irq_bit(0);	// stop RTC
+			set_rtc_irq_bit(0);	/*  stop RTC */
 			del_timer(&devpriv->rtc_irq_timer);
 #endif
 		case INT_TYPE_AI1_DMA:
 		case INT_TYPE_AI3_DMA:
-			if (devpriv->neverending_ai) {
+			if (devpriv->neverending_ai ||
+					(!devpriv->neverending_ai &&
+					 devpriv->ai_act_scan > 0)) {
 				/* wait for running dma transfer to end, do cleanup in interrupt */
 				goto end;
 			}
@@ -1469,14 +1482,14 @@ static int pcl818_ai_cancel(struct comedi_device * dev, struct comedi_subdevice
 		case INT_TYPE_AO3_INT:
 #endif
 			outb(inb(dev->iobase + PCL818_CONTROL) & 0x73, dev->iobase + PCL818_CONTROL);	/* Stop A/D */
-			comedi_udelay(1);
+			udelay(1);
 			start_pacer(dev, -1, 0, 0);
 			outb(0, dev->iobase + PCL818_AD_LO);
 			inb(dev->iobase + PCL818_AD_LO);
 			inb(dev->iobase + PCL818_AD_HI);
 			outb(0, dev->iobase + PCL818_CLRINT);	/* clear INT request */
 			outb(0, dev->iobase + PCL818_CONTROL);	/* Stop A/D */
-			if (devpriv->usefifo) {	// FIFO shutdown
+			if (devpriv->usefifo) {	/*  FIFO shutdown */
 				outb(0, dev->iobase + PCL818_FI_INTCLR);
 				outb(0, dev->iobase + PCL818_FI_FLUSH);
 				outb(0, dev->iobase + PCL818_FI_ENABLE);
@@ -1484,12 +1497,14 @@ static int pcl818_ai_cancel(struct comedi_device * dev, struct comedi_subdevice
 			devpriv->irq_blocked = 0;
 			devpriv->last_int_sub = s;
 			devpriv->neverending_ai = 0;
+			devpriv->ai_mode = 0;
+			devpriv->irq_was_now_closed = 0;
 			break;
 		}
 	}
 
       end:
-	rt_printk("pcl818_ai_cancel() end\n");
+	printk("pcl818_ai_cancel() end\n");
 	return 0;
 }
 
@@ -1500,39 +1515,39 @@ static int pcl818_ai_cancel(struct comedi_device * dev, struct comedi_subdevice
 static int pcl818_check(unsigned long iobase)
 {
 	outb(0x00, iobase + PCL818_MUX);
-	comedi_udelay(1);
+	udelay(1);
 	if (inb(iobase + PCL818_MUX) != 0x00)
-		return 1;	//there isn't card
+		return 1;	/* there isn't card */
 	outb(0x55, iobase + PCL818_MUX);
-	comedi_udelay(1);
+	udelay(1);
 	if (inb(iobase + PCL818_MUX) != 0x55)
-		return 1;	//there isn't card
+		return 1;	/* there isn't card */
 	outb(0x00, iobase + PCL818_MUX);
-	comedi_udelay(1);
+	udelay(1);
 	outb(0x18, iobase + PCL818_CONTROL);
-	comedi_udelay(1);
+	udelay(1);
 	if (inb(iobase + PCL818_CONTROL) != 0x18)
-		return 1;	//there isn't card
-	return 0;		// ok, card exist
+		return 1;	/* there isn't card */
+	return 0;		/*  ok, card exist */
 }
 
 /*
 ==============================================================================
  reset whole PCL-818 cards
 */
-static void pcl818_reset(struct comedi_device * dev)
+static void pcl818_reset(struct comedi_device *dev)
 {
-	if (devpriv->usefifo) {	// FIFO shutdown
+	if (devpriv->usefifo) {	/*  FIFO shutdown */
 		outb(0, dev->iobase + PCL818_FI_INTCLR);
 		outb(0, dev->iobase + PCL818_FI_FLUSH);
 		outb(0, dev->iobase + PCL818_FI_ENABLE);
 	}
-	outb(0, dev->iobase + PCL818_DA_LO);	// DAC=0V
+	outb(0, dev->iobase + PCL818_DA_LO);	/*  DAC=0V */
 	outb(0, dev->iobase + PCL818_DA_HI);
-	comedi_udelay(1);
-	outb(0, dev->iobase + PCL818_DO_HI);	// DO=$0000
+	udelay(1);
+	outb(0, dev->iobase + PCL818_DO_HI);	/*  DO=$0000 */
 	outb(0, dev->iobase + PCL818_DO_LO);
-	comedi_udelay(1);
+	udelay(1);
 	outb(0, dev->iobase + PCL818_CONTROL);
 	outb(0, dev->iobase + PCL818_CNTENABLE);
 	outb(0, dev->iobase + PCL818_MUX);
@@ -1641,9 +1656,9 @@ static int rtc_setfreq_irq(int freq)
 ==============================================================================
   Free any resources that we have claimed
 */
-static void free_resources(struct comedi_device * dev)
+static void free_resources(struct comedi_device *dev)
 {
-	//rt_printk("free_resource()\n");
+	/* printk("free_resource()\n"); */
 	if (dev->private) {
 		pcl818_ai_cancel(dev, devpriv->sub_ai);
 		pcl818_reset(dev);
@@ -1655,7 +1670,7 @@ static void free_resources(struct comedi_device * dev)
 			free_pages(devpriv->dmabuf[1], devpriv->dmapages[1]);
 #ifdef unused
 		if (devpriv->rtc_irq)
-			comedi_free_irq(devpriv->rtc_irq, dev);
+			free_irq(devpriv->rtc_irq, dev);
 		if ((devpriv->dma_rtc) && (RTC_lock == 1)) {
 			if (devpriv->rtc_iobase)
 				release_region(devpriv->rtc_iobase,
@@ -1670,7 +1685,7 @@ static void free_resources(struct comedi_device * dev)
 		free_irq(dev->irq, dev);
 	if (dev->iobase)
 		release_region(dev->iobase, devpriv->io_range);
-	//rt_printk("free_resource() end\n");
+	/* printk("free_resource() end\n"); */
 }
 
 /*
@@ -1679,15 +1694,17 @@ static void free_resources(struct comedi_device * dev)
    Initialization
 
 */
-static int pcl818_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int ret;
 	unsigned long iobase;
-	unsigned int irq, dma;
+	unsigned int irq;
+	int dma;
 	unsigned long pages;
 	struct comedi_subdevice *s;
 
-	if ((ret = alloc_private(dev, sizeof(struct pcl818_private))) < 0)
+	ret = alloc_private(dev, sizeof(struct pcl818_private));
+	if (ret < 0)
 		return ret;	/* Can't alloc mem */
 
 	/* claim our I/O space */
@@ -1695,19 +1712,19 @@ static int pcl818_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	printk("comedi%d: pcl818:  board=%s, ioport=0x%03lx",
 		dev->minor, this_board->name, iobase);
 	devpriv->io_range = this_board->io_range;
-	if ((this_board->fifo) && (it->options[2] == -1)) {	// we've board with FIFO and we want to use FIFO
+	if ((this_board->fifo) && (it->options[2] == -1)) {	/*  we've board with FIFO and we want to use FIFO */
 		devpriv->io_range = PCLx1xFIFO_RANGE;
 		devpriv->usefifo = 1;
 	}
 	if (!request_region(iobase, devpriv->io_range, "pcl818")) {
-		rt_printk("I/O port conflict\n");
+		printk("I/O port conflict\n");
 		return -EIO;
 	}
 
 	dev->iobase = iobase;
 
 	if (pcl818_check(iobase)) {
-		rt_printk(", I can't detect board. FAIL!\n");
+		printk(", I can't detect board. FAIL!\n");
 		return -EIO;
 	}
 
@@ -1719,19 +1736,18 @@ static int pcl818_attach(struct comedi_device * dev, struct comedi_devconfig * i
 		irq = it->options[1];
 		if (irq) {	/* we want to use IRQ */
 			if (((1 << irq) & this_board->IRQbits) == 0) {
-				rt_printk
+				printk
 					(", IRQ %u is out of allowed range, DISABLING IT",
 					irq);
 				irq = 0;	/* Bad IRQ */
 			} else {
-				if (comedi_request_irq(irq, interrupt_pcl818, 0,
-						"pcl818", dev)) {
-					rt_printk
+				if (request_irq(irq, interrupt_pcl818, 0, "pcl818", dev)) {
+					printk
 						(", unable to allocate IRQ %u, DISABLING IT",
 						irq);
 					irq = 0;	/* Can't use IRQ */
 				} else {
-					rt_printk(", irq=%u", irq);
+					printk(", irq=%u", irq);
 				}
 			}
 		}
@@ -1750,7 +1766,7 @@ static int pcl818_attach(struct comedi_device * dev, struct comedi_devconfig * i
 #ifdef unused
 	/* grab RTC for DMA operations */
 	devpriv->dma_rtc = 0;
-	if (it->options[2] > 0) {	// we want to use DMA
+	if (it->options[2] > 0) {	/*  we want to use DMA */
 		if (RTC_lock == 0) {
 			if (!request_region(RTC_PORT(0), RTC_IO_EXTENT,
 					"pcl818 (RTC)"))
@@ -1759,12 +1775,11 @@ static int pcl818_attach(struct comedi_device * dev, struct comedi_devconfig * i
 		devpriv->rtc_iobase = RTC_PORT(0);
 		devpriv->rtc_iosize = RTC_IO_EXTENT;
 		RTC_lock++;
-		if (!comedi_request_irq(RTC_IRQ,
-				interrupt_pcl818_ai_mode13_dma_rtc, 0,
+		if (!request_irq(RTC_IRQ, interrupt_pcl818_ai_mode13_dma_rtc, 0,
 				"pcl818 DMA (RTC)", dev)) {
 			devpriv->dma_rtc = 1;
 			devpriv->rtc_irq = RTC_IRQ;
-			rt_printk(", dma_irq=%u", devpriv->rtc_irq);
+			printk(", dma_irq=%u", devpriv->rtc_irq);
 		} else {
 			RTC_lock--;
 			if (RTC_lock == 0) {
@@ -1789,31 +1804,31 @@ static int pcl818_attach(struct comedi_device * dev, struct comedi_devconfig * i
 		if (dma < 1)
 			goto no_dma;	/* DMA disabled */
 		if (((1 << dma) & this_board->DMAbits) == 0) {
-			rt_printk(", DMA is out of allowed range, FAIL!\n");
+			printk(", DMA is out of allowed range, FAIL!\n");
 			return -EINVAL;	/* Bad DMA */
 		}
 		ret = request_dma(dma, "pcl818");
 		if (ret) {
-			rt_printk(", unable to allocate DMA %u, FAIL!\n", dma);
+			printk(", unable to allocate DMA %u, FAIL!\n", dma);
 			return -EBUSY;	/* DMA isn't free */
 		}
 		devpriv->dma = dma;
-		rt_printk(", dma=%u", dma);
+		printk(", dma=%u", dma);
 		pages = 2;	/* we need 16KB */
 		devpriv->dmabuf[0] = __get_dma_pages(GFP_KERNEL, pages);
 		if (!devpriv->dmabuf[0]) {
-			rt_printk(", unable to allocate DMA buffer, FAIL!\n");
+			printk(", unable to allocate DMA buffer, FAIL!\n");
 			/* maybe experiment with try_to_free_pages() will help .... */
 			return -EBUSY;	/* no buffer :-( */
 		}
 		devpriv->dmapages[0] = pages;
 		devpriv->hwdmaptr[0] = virt_to_bus((void *)devpriv->dmabuf[0]);
 		devpriv->hwdmasize[0] = (1 << pages) * PAGE_SIZE;
-		//rt_printk("%d %d %ld, ",devpriv->dmapages[0],devpriv->hwdmasize[0],PAGE_SIZE);
-		if (devpriv->dma_rtc == 0) {	// we must do duble buff :-(
+		/* printk("%d %d %ld, ",devpriv->dmapages[0],devpriv->hwdmasize[0],PAGE_SIZE); */
+		if (devpriv->dma_rtc == 0) {	/*  we must do duble buff :-( */
 			devpriv->dmabuf[1] = __get_dma_pages(GFP_KERNEL, pages);
 			if (!devpriv->dmabuf[1]) {
-				rt_printk
+				printk
 					(", unable to allocate DMA buffer, FAIL!\n");
 				return -EBUSY;
 			}
@@ -1826,7 +1841,8 @@ static int pcl818_attach(struct comedi_device * dev, struct comedi_devconfig * i
 
       no_dma:
 
-	if ((ret = alloc_subdevices(dev, 4)) < 0)
+	ret = alloc_subdevices(dev, 4);
+	if (ret < 0)
 		return ret;
 
 	s = dev->subdevices + 0;
@@ -1858,7 +1874,7 @@ static int pcl818_attach(struct comedi_device * dev, struct comedi_devconfig * i
 		}
 		if (this_board->is_818) {
 			if ((it->options[4] == 1) || (it->options[4] == 10))
-				s->range_table = &range_pcl818l_h_ai;	// secondary range list jumper selectable
+				s->range_table = &range_pcl818l_h_ai;	/*  secondary range list jumper selectable */
 		} else {
 			switch (it->options[4]) {
 			case 0:
@@ -1971,7 +1987,7 @@ static int pcl818_attach(struct comedi_device * dev, struct comedi_devconfig * i
 
 	pcl818_reset(dev);
 
-	rt_printk("\n");
+	printk("\n");
 
 	return 0;
 }
@@ -1980,9 +1996,9 @@ static int pcl818_attach(struct comedi_device * dev, struct comedi_devconfig * i
 ==============================================================================
   Removes device
  */
-static int pcl818_detach(struct comedi_device * dev)
+static int pcl818_detach(struct comedi_device *dev)
 {
-	//  rt_printk("comedi%d: pcl818: remove\n", dev->minor);
+	/*   printk("comedi%d: pcl818: remove\n", dev->minor); */
 	free_resources(dev);
 	return 0;
 }
diff --git a/drivers/staging/comedi/drivers/pcm3724.c b/drivers/staging/comedi/drivers/pcm3724.c
index a3ed3a0e855..a5d6b1d9a1a 100644
--- a/drivers/staging/comedi/drivers/pcm3724.c
+++ b/drivers/staging/comedi/drivers/pcm3724.c
@@ -62,18 +62,18 @@ Copy/pasted/hacked from pcm724.c
 #define CR_A_MODE(a)	((a)<<5)
 #define CR_CW		0x80
 
-static int pcm3724_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int pcm3724_detach(struct comedi_device * dev);
+static int pcm3724_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int pcm3724_detach(struct comedi_device *dev);
 
 struct pcm3724_board {
-	const char *name;	// driver name
-	int dio;		// num of DIO
-	int numofports;		// num of 8255 subdevices
-	unsigned int IRQbits;	// allowed interrupts
-	unsigned int io_range;	// len of IO space
+	const char *name;	/*  driver name */
+	int dio;		/*  num of DIO */
+	int numofports;		/*  num of 8255 subdevices */
+	unsigned int IRQbits;	/*  allowed interrupts */
+	unsigned int io_range;	/*  len of IO space */
 };
 
-//used to track configured dios
+/* used to track configured dios */
 struct priv_pcm3724 {
 	int dio_1;
 	int dio_2;
@@ -87,36 +87,36 @@ static const struct pcm3724_board boardtypes[] = {
 #define this_board ((const struct pcm3724_board *)dev->board_ptr)
 
 static struct comedi_driver driver_pcm3724 = {
-      driver_name:"pcm3724",
-      module:THIS_MODULE,
-      attach:pcm3724_attach,
-      detach:pcm3724_detach,
-      board_name:&boardtypes[0].name,
-      num_names:n_boardtypes,
-      offset:sizeof(struct pcm3724_board),
+	.driver_name = "pcm3724",
+	.module = THIS_MODULE,
+	.attach = pcm3724_attach,
+	.detach = pcm3724_detach,
+	.board_name = &boardtypes[0].name,
+	.num_names = n_boardtypes,
+	.offset = sizeof(struct pcm3724_board),
 };
 
 COMEDI_INITCLEANUP(driver_pcm3724);
 
-//          (setq c-basic-offset 8)
+/* (setq c-basic-offset 8) */
 
 static int subdev_8255_cb(int dir, int port, int data, unsigned long arg)
 {
 	unsigned long iobase = arg;
 	unsigned char inbres;
-	//printk("8255cb %d %d %d %lx\n", dir,port,data,arg);
+	/* printk("8255cb %d %d %d %lx\n", dir,port,data,arg); */
 	if (dir) {
-		//printk("8255 cb   outb(%x, %lx)\n", data, iobase+port);
+		/* printk("8255 cb   outb(%x, %lx)\n", data, iobase+port); */
 		outb(data, iobase + port);
 		return 0;
 	} else {
 		inbres = inb(iobase + port);
-		//printk("8255 cb   inb(%lx) = %x\n", iobase+port, inbres);
+		/* printk("8255 cb   inb(%lx) = %x\n", iobase+port, inbres); */
 		return inbres;
 	}
 }
 
-static int compute_buffer(int config, int devno, struct comedi_subdevice * s)
+static int compute_buffer(int config, int devno, struct comedi_subdevice *s)
 {
 	/* 1 in io_bits indicates output */
 	if (s->io_bits & 0x0000ff) {
@@ -143,7 +143,7 @@ static int compute_buffer(int config, int devno, struct comedi_subdevice * s)
 	return config;
 }
 
-static void do_3724_config(struct comedi_device * dev, struct comedi_subdevice * s,
+static void do_3724_config(struct comedi_device *dev, struct comedi_subdevice *s,
 	int chanspec)
 {
 	int config;
@@ -173,11 +173,11 @@ static void do_3724_config(struct comedi_device * dev, struct comedi_subdevice *
 		port_8255_cfg = dev->iobase + SIZE_8255 + _8255_CR;
 	}
 	outb(buffer_config, dev->iobase + 8);	/* update buffer register */
-	//printk("pcm3724 buffer_config (%lx) %d, %x\n", dev->iobase + _8255_CR, chanspec, buffer_config);
+	/* printk("pcm3724 buffer_config (%lx) %d, %x\n", dev->iobase + _8255_CR, chanspec, buffer_config); */
 	outb(config, port_8255_cfg);
 }
 
-static void enable_chan(struct comedi_device * dev, struct comedi_subdevice * s, int chanspec)
+static void enable_chan(struct comedi_device *dev, struct comedi_subdevice *s, int chanspec)
 {
 	unsigned int mask;
 	int gatecfg;
@@ -187,9 +187,9 @@ static void enable_chan(struct comedi_device * dev, struct comedi_subdevice * s,
 	priv = (struct priv_pcm3724 *) (dev->private);
 
 	mask = 1 << CR_CHAN(chanspec);
-	if (s == dev->subdevices) {	// subdev 0
+	if (s == dev->subdevices) {	/*  subdev 0 */
 		priv->dio_1 |= mask;
-	} else {		//subdev 1
+	} else {		/* subdev 1 */
 		priv->dio_2 |= mask;
 	}
 	if (priv->dio_1 & 0xff0000) {
@@ -210,13 +210,13 @@ static void enable_chan(struct comedi_device * dev, struct comedi_subdevice * s,
 	if (priv->dio_2 & 0xff) {
 		gatecfg |= GATE_A1;
 	}
-	//      printk("gate control %x\n", gatecfg);
+	/*       printk("gate control %x\n", gatecfg); */
 	outb(gatecfg, dev->iobase + 9);
 }
 
 /* overriding the 8255 insn config */
-static int subdev_3724_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int subdev_3724_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	unsigned int mask;
 	unsigned int bits;
@@ -252,7 +252,7 @@ static int subdev_3724_insn_config(struct comedi_device * dev, struct comedi_sub
 	return 1;
 }
 
-static int pcm3724_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int pcm3724_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	unsigned long iobase;
 	unsigned int iorange;
@@ -260,7 +260,9 @@ static int pcm3724_attach(struct comedi_device * dev, struct comedi_devconfig *
 
 	iobase = it->options[0];
 	iorange = this_board->io_range;
-	if ((ret = alloc_private(dev, sizeof(struct priv_pcm3724))) < 0)
+
+	ret = alloc_private(dev, sizeof(struct priv_pcm3724));
+	if (ret < 0)
 		return -ENOMEM;
 
 	((struct priv_pcm3724 *) (dev->private))->dio_1 = 0;
@@ -279,7 +281,8 @@ static int pcm3724_attach(struct comedi_device * dev, struct comedi_devconfig *
 
 	n_subdevices = this_board->numofports;
 
-	if ((ret = alloc_subdevices(dev, n_subdevices)) < 0)
+	ret = alloc_subdevices(dev, n_subdevices);
+	if (ret < 0)
 		return ret;
 
 	for (i = 0; i < dev->n_subdevices; i++) {
@@ -290,7 +293,7 @@ static int pcm3724_attach(struct comedi_device * dev, struct comedi_devconfig *
 	return 0;
 }
 
-static int pcm3724_detach(struct comedi_device * dev)
+static int pcm3724_detach(struct comedi_device *dev)
 {
 	int i;
 
diff --git a/drivers/staging/comedi/drivers/pcm3730.c b/drivers/staging/comedi/drivers/pcm3730.c
index 1de555fe645..ae90ea4ae3c 100644
--- a/drivers/staging/comedi/drivers/pcm3730.c
+++ b/drivers/staging/comedi/drivers/pcm3730.c
@@ -19,28 +19,28 @@ Configuration options:
 
 #include <linux/ioport.h>
 
-#define PCM3730_SIZE 4		// consecutive io port addresses
+#define PCM3730_SIZE 4		/*  consecutive io port addresses */
 
-#define PCM3730_DOA 0		// offsets for each port
+#define PCM3730_DOA 0		/*  offsets for each port */
 #define PCM3730_DOB 2
 #define PCM3730_DOC 3
 #define PCM3730_DIA 0
 #define PCM3730_DIB 2
 #define PCM3730_DIC 3
 
-static int pcm3730_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int pcm3730_detach(struct comedi_device * dev);
+static int pcm3730_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int pcm3730_detach(struct comedi_device *dev);
 static struct comedi_driver driver_pcm3730 = {
-      driver_name:"pcm3730",
-      module:THIS_MODULE,
-      attach:pcm3730_attach,
-      detach:pcm3730_detach,
+	.driver_name = "pcm3730",
+	.module = THIS_MODULE,
+	.attach = pcm3730_attach,
+	.detach = pcm3730_detach,
 };
 
 COMEDI_INITCLEANUP(driver_pcm3730);
 
-static int pcm3730_do_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcm3730_do_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -54,8 +54,8 @@ static int pcm3730_do_insn_bits(struct comedi_device * dev, struct comedi_subdev
 	return 2;
 }
 
-static int pcm3730_di_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcm3730_di_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -63,7 +63,7 @@ static int pcm3730_di_insn_bits(struct comedi_device * dev, struct comedi_subdev
 	return 2;
 }
 
-static int pcm3730_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int pcm3730_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	unsigned long iobase;
@@ -141,7 +141,7 @@ static int pcm3730_attach(struct comedi_device * dev, struct comedi_devconfig *
 	return 0;
 }
 
-static int pcm3730_detach(struct comedi_device * dev)
+static int pcm3730_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: pcm3730: remove\n", dev->minor);
 
diff --git a/drivers/staging/comedi/drivers/pcm_common.c b/drivers/staging/comedi/drivers/pcm_common.c
new file mode 100644
index 00000000000..ebd9838232a
--- /dev/null
+++ b/drivers/staging/comedi/drivers/pcm_common.c
@@ -0,0 +1,111 @@
+#include "../comedidev.h"
+#include "pcm_common.h"
+
+/*
+ * 'do_cmdtest' function for an 'INTERRUPT' subdevice.  This is for
+ * the PCM drivers.
+ */
+int comedi_pcm_cmdtest(struct comedi_device *dev,
+		       struct comedi_subdevice *s, struct comedi_cmd *cmd)
+{
+	int err = 0;
+	unsigned int tmp;
+
+	/* step 1: make sure trigger sources are trivially valid */
+
+	tmp = cmd->start_src;
+	cmd->start_src &= (TRIG_NOW | TRIG_INT);
+	if (!cmd->start_src || tmp != cmd->start_src)
+		err++;
+
+	tmp = cmd->scan_begin_src;
+	cmd->scan_begin_src &= TRIG_EXT;
+	if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src)
+		err++;
+
+	tmp = cmd->convert_src;
+	cmd->convert_src &= TRIG_NOW;
+	if (!cmd->convert_src || tmp != cmd->convert_src)
+		err++;
+
+	tmp = cmd->scan_end_src;
+	cmd->scan_end_src &= TRIG_COUNT;
+	if (!cmd->scan_end_src || tmp != cmd->scan_end_src)
+		err++;
+
+	tmp = cmd->stop_src;
+	cmd->stop_src &= (TRIG_COUNT | TRIG_NONE);
+	if (!cmd->stop_src || tmp != cmd->stop_src)
+		err++;
+
+	if (err)
+		return 1;
+
+	/* step 2: make sure trigger sources are unique and mutually compatible */
+
+	/* these tests are true if more than one _src bit is set */
+	if ((cmd->start_src & (cmd->start_src - 1)) != 0)
+		err++;
+	if ((cmd->scan_begin_src & (cmd->scan_begin_src - 1)) != 0)
+		err++;
+	if ((cmd->convert_src & (cmd->convert_src - 1)) != 0)
+		err++;
+	if ((cmd->scan_end_src & (cmd->scan_end_src - 1)) != 0)
+		err++;
+	if ((cmd->stop_src & (cmd->stop_src - 1)) != 0)
+		err++;
+
+	if (err)
+		return 2;
+
+	/* step 3: make sure arguments are trivially compatible */
+
+	/* cmd->start_src == TRIG_NOW || cmd->start_src == TRIG_INT */
+	if (cmd->start_arg != 0) {
+		cmd->start_arg = 0;
+		err++;
+	}
+
+	/* cmd->scan_begin_src == TRIG_EXT */
+	if (cmd->scan_begin_arg != 0) {
+		cmd->scan_begin_arg = 0;
+		err++;
+	}
+
+	/* cmd->convert_src == TRIG_NOW */
+	if (cmd->convert_arg != 0) {
+		cmd->convert_arg = 0;
+		err++;
+	}
+
+	/* cmd->scan_end_src == TRIG_COUNT */
+	if (cmd->scan_end_arg != cmd->chanlist_len) {
+		cmd->scan_end_arg = cmd->chanlist_len;
+		err++;
+	}
+
+	switch (cmd->stop_src) {
+	case TRIG_COUNT:
+		/* any count allowed */
+		break;
+	case TRIG_NONE:
+		if (cmd->stop_arg != 0) {
+			cmd->stop_arg = 0;
+			err++;
+		}
+		break;
+	default:
+		break;
+	}
+
+	if (err)
+		return 3;
+
+	/* step 4: fix up any arguments */
+
+	/* if (err) return 4; */
+
+	return 0;
+}
+
+EXPORT_SYMBOL(comedi_pcm_cmdtest);
diff --git a/drivers/staging/comedi/drivers/pcm_common.h b/drivers/staging/comedi/drivers/pcm_common.h
new file mode 100644
index 00000000000..cd4840c1144
--- /dev/null
+++ b/drivers/staging/comedi/drivers/pcm_common.h
@@ -0,0 +1,8 @@
+#ifndef _comedi_common_H
+#define _comedi_common_H
+
+extern int comedi_pcm_cmdtest(struct comedi_device *dev,
+			      struct comedi_subdevice *s,
+			      struct comedi_cmd *cmd);
+
+#endif
diff --git a/drivers/staging/comedi/drivers/pcmad.c b/drivers/staging/comedi/drivers/pcmad.c
index fc2a73d97c2..9bb26699f47 100644
--- a/drivers/staging/comedi/drivers/pcmad.c
+++ b/drivers/staging/comedi/drivers/pcmad.c
@@ -41,6 +41,7 @@ Configuration options:
           1 = two's complement
 */
 
+#include <linux/interrupt.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
@@ -58,12 +59,12 @@ struct pcmad_board_struct {
 };
 static const struct pcmad_board_struct pcmad_boards[] = {
 	{
-	      name:	"pcmad12",
-	      n_ai_bits:12,
+	.name = "pcmad12",
+	.n_ai_bits = 12,
 		},
 	{
-	      name:	"pcmad16",
-	      n_ai_bits:16,
+	.name = "pcmad16",
+	.n_ai_bits = 16,
 		},
 };
 
@@ -76,24 +77,24 @@ struct pcmad_priv_struct {
 };
 #define devpriv ((struct pcmad_priv_struct *)dev->private)
 
-static int pcmad_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int pcmad_detach(struct comedi_device * dev);
+static int pcmad_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int pcmad_detach(struct comedi_device *dev);
 static struct comedi_driver driver_pcmad = {
-      driver_name:"pcmad",
-      module:THIS_MODULE,
-      attach:pcmad_attach,
-      detach:pcmad_detach,
-      board_name:&pcmad_boards[0].name,
-      num_names:n_pcmad_boards,
-      offset:sizeof(pcmad_boards[0]),
+	.driver_name = "pcmad",
+	.module = THIS_MODULE,
+	.attach = pcmad_attach,
+	.detach = pcmad_detach,
+	.board_name = &pcmad_boards[0].name,
+	.num_names = n_pcmad_boards,
+	.offset = sizeof(pcmad_boards[0]),
 };
 
 COMEDI_INITCLEANUP(driver_pcmad);
 
 #define TIMEOUT	100
 
-static int pcmad_ai_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcmad_ai_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan;
@@ -126,7 +127,7 @@ static int pcmad_ai_insn_read(struct comedi_device * dev, struct comedi_subdevic
  * 2	0=single ended 1=differential
  * 3	0=straight binary 1=two's comp
  */
-static int pcmad_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int pcmad_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int ret;
 	struct comedi_subdevice *s;
@@ -140,9 +141,12 @@ static int pcmad_attach(struct comedi_device * dev, struct comedi_devconfig * it
 	}
 	dev->iobase = iobase;
 
-	if ((ret = alloc_subdevices(dev, 1)) < 0)
+	ret = alloc_subdevices(dev, 1);
+	if (ret < 0)
 		return ret;
-	if ((ret = alloc_private(dev, sizeof(struct pcmad_priv_struct))) < 0)
+
+	ret = alloc_private(dev, sizeof(struct pcmad_priv_struct));
+	if (ret < 0)
 		return ret;
 
 	dev->board_name = this_board->name;
@@ -159,7 +163,7 @@ static int pcmad_attach(struct comedi_device * dev, struct comedi_devconfig * it
 	return 0;
 }
 
-static int pcmad_detach(struct comedi_device * dev)
+static int pcmad_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: pcmad: remove\n", dev->minor);
 
diff --git a/drivers/staging/comedi/drivers/pcmda12.c b/drivers/staging/comedi/drivers/pcmda12.c
index 2a1ff465602..6e172a6b1cb 100644
--- a/drivers/staging/comedi/drivers/pcmda12.c
+++ b/drivers/staging/comedi/drivers/pcmda12.c
@@ -55,7 +55,6 @@ Configuration Options:
 
 #include <linux/pci.h>		/* for PCI devices */
 
-#define MIN(a,b) ( ((a) < (b)) ? (a) : (b) )
 #define SDEV_NO ((int)(s - dev->subdevices))
 #define CHANS 8
 #define IOSIZE 16
@@ -83,7 +82,7 @@ static const struct comedi_lrange pcmda12_ranges = {
 
 static const struct pcmda12_board pcmda12_boards[] = {
 	{
-	      name:	"pcmda12",
+	.name = "pcmda12",
 		},
 };
 
@@ -107,16 +106,16 @@ struct pcmda12_private {
  * the board, and also about the kernel module that contains
  * the device code.
  */
-static int pcmda12_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int pcmda12_detach(struct comedi_device * dev);
+static int pcmda12_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int pcmda12_detach(struct comedi_device *dev);
 
-static void zero_chans(struct comedi_device * dev);
+static void zero_chans(struct comedi_device *dev);
 
 static struct comedi_driver driver = {
-      driver_name:"pcmda12",
-      module:THIS_MODULE,
-      attach:pcmda12_attach,
-      detach:pcmda12_detach,
+	.driver_name = "pcmda12",
+	.module = THIS_MODULE,
+	.attach = pcmda12_attach,
+	.detach = pcmda12_detach,
 /* It is not necessary to implement the following members if you are
  * writing a driver for a ISA PnP or PCI card */
 	/* Most drivers will support multiple types of boards by
@@ -135,15 +134,15 @@ static struct comedi_driver driver = {
 	 * the type of board in software.  ISA PnP, PCI, and PCMCIA
 	 * devices are such boards.
 	 */
-      board_name:&pcmda12_boards[0].name,
-      offset:sizeof(struct pcmda12_board),
-      num_names:sizeof(pcmda12_boards) / sizeof(struct pcmda12_board),
+	.board_name = &pcmda12_boards[0].name,
+	.offset = sizeof(struct pcmda12_board),
+	.num_names = ARRAY_SIZE(pcmda12_boards),
 };
 
-static int ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
 /*
  * Attach is called by the Comedi core to configure the driver
@@ -151,7 +150,7 @@ static int ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
  * in the driver structure, dev->board_ptr contains that
  * address.
  */
-static int pcmda12_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int pcmda12_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	unsigned long iobase;
@@ -220,7 +219,7 @@ static int pcmda12_attach(struct comedi_device * dev, struct comedi_devconfig *
  * allocated by _attach().  dev->private and dev->subdevices are
  * deallocated automatically by the core.
  */
-static int pcmda12_detach(struct comedi_device * dev)
+static int pcmda12_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: %s: remove\n", dev->minor, driver.driver_name);
 	if (dev->iobase)
@@ -228,7 +227,7 @@ static int pcmda12_detach(struct comedi_device * dev)
 	return 0;
 }
 
-static void zero_chans(struct comedi_device * dev)
+static void zero_chans(struct comedi_device *dev)
 {				/* sets up an
 				   ASIC chip to defaults */
 	int i;
@@ -241,8 +240,8 @@ static void zero_chans(struct comedi_device * dev)
 	inb(LSB_PORT(0));	/* update chans. */
 }
 
-static int ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
@@ -283,8 +282,8 @@ static int ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
    DAC outputs, which makes all AO channels update simultaneously.
    This is useful for some control applications, I would imagine.
 */
-static int ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
diff --git a/drivers/staging/comedi/drivers/pcmmio.c b/drivers/staging/comedi/drivers/pcmmio.c
index 01e40f1b562..cdf501afa14 100644
--- a/drivers/staging/comedi/drivers/pcmmio.c
+++ b/drivers/staging/comedi/drivers/pcmmio.c
@@ -73,11 +73,11 @@ Configuration Options:
   [1] - IRQ (optional -- for edge-detect interrupt support only, leave out if you don't need this feature)
 */
 
+#include <linux/interrupt.h>
 #include "../comedidev.h"
+#include "pcm_common.h"
 #include <linux/pci.h>		/* for PCI devices */
 
-#define MIN(a,b) ( ((a) < (b)) ? (a) : (b) )
-
 /* This stuff is all from pcmuio.c -- it refers to the DIO subdevices only */
 #define CHANS_PER_PORT   8
 #define PORTS_PER_ASIC   6
@@ -179,19 +179,19 @@ static const struct comedi_lrange ranges_ao =
 
 static const struct pcmmio_board pcmmio_boards[] = {
 	{
-	      name:	"pcmmio",
-	      dio_num_asics:1,
-	      dio_num_ports:6,
-	      total_iosize:32,
-	      ai_bits:	16,
-	      ao_bits:	16,
-	      n_ai_chans:16,
-	      n_ao_chans:8,
-	      ai_range_table:&ranges_ai,
-	      ao_range_table:&ranges_ao,
-	      ai_rinsn:ai_rinsn,
-	      ao_rinsn:ao_rinsn,
-      ao_winsn:ao_winsn},
+	.name = "pcmmio",
+	.dio_num_asics = 1,
+	.dio_num_ports = 6,
+	.total_iosize = 32,
+	.ai_bits = 16,
+	.ao_bits = 16,
+	.n_ai_chans = 16,
+	.n_ao_chans = 8,
+	.ai_range_table = &ranges_ai,
+	.ao_range_table = &ranges_ao,
+	.ai_rinsn = ai_rinsn,
+	.ao_rinsn = ao_rinsn,
+	.ao_winsn = ao_winsn},
 };
 
 /*
@@ -264,14 +264,14 @@ struct pcmmio_private {
  * the board, and also about the kernel module that contains
  * the device code.
  */
-static int pcmmio_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int pcmmio_detach(struct comedi_device * dev);
+static int pcmmio_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int pcmmio_detach(struct comedi_device *dev);
 
 static struct comedi_driver driver = {
-      driver_name:"pcmmio",
-      module:THIS_MODULE,
-      attach:pcmmio_attach,
-      detach:pcmmio_detach,
+	.driver_name = "pcmmio",
+	.module = THIS_MODULE,
+	.attach = pcmmio_attach,
+	.detach = pcmmio_detach,
 /* It is not necessary to implement the following members if you are
  * writing a driver for a ISA PnP or PCI card */
 	/* Most drivers will support multiple types of boards by
@@ -290,29 +290,29 @@ static struct comedi_driver driver = {
 	 * the type of board in software.  ISA PnP, PCI, and PCMCIA
 	 * devices are such boards.
 	 */
-      board_name:&pcmmio_boards[0].name,
-      offset:sizeof(struct pcmmio_board),
-      num_names:sizeof(pcmmio_boards) / sizeof(struct pcmmio_board),
+	.board_name = &pcmmio_boards[0].name,
+	.offset = sizeof(struct pcmmio_board),
+	.num_names = ARRAY_SIZE(pcmmio_boards),
 };
 
-static int pcmmio_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int pcmmio_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int pcmmio_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int pcmmio_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
-static irqreturn_t interrupt_pcmmio(int irq, void *d PT_REGS_ARG);
+static irqreturn_t interrupt_pcmmio(int irq, void *d);
 static void pcmmio_stop_intr(struct comedi_device *, struct comedi_subdevice *);
-static int pcmmio_cancel(struct comedi_device * dev, struct comedi_subdevice * s);
-static int pcmmio_cmd(struct comedi_device * dev, struct comedi_subdevice * s);
-static int pcmmio_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd);
+static int pcmmio_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
+static int pcmmio_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
+static int pcmmio_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd);
 
 /* some helper functions to deal with specifics of this device's registers */
-static void init_asics(struct comedi_device * dev);	/* sets up/clears ASIC chips to defaults */
-static void switch_page(struct comedi_device * dev, int asic, int page);
+static void init_asics(struct comedi_device *dev);	/* sets up/clears ASIC chips to defaults */
+static void switch_page(struct comedi_device *dev, int asic, int page);
 #ifdef notused
-static void lock_port(struct comedi_device * dev, int asic, int port);
-static void unlock_port(struct comedi_device * dev, int asic, int port);
+static void lock_port(struct comedi_device *dev, int asic, int port);
+static void unlock_port(struct comedi_device *dev, int asic, int port);
 #endif
 
 /*
@@ -321,7 +321,7 @@ static void unlock_port(struct comedi_device * dev, int asic, int port);
  * in the driver structure, dev->board_ptr contains that
  * address.
  */
-static int pcmmio_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int pcmmio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	int sdev_no, chans_left, n_dio_subdevs, n_subdevs, port, asic,
@@ -364,7 +364,7 @@ static int pcmmio_attach(struct comedi_device * dev, struct comedi_devconfig * i
 			dev->iobase + 16 + asic * ASIC_IOSIZE;
 		devpriv->asics[asic].irq = 0;	/* this gets actually set at the end of
 						   this function when we
-						   comedi_request_irqs */
+						   request_irqs */
 		spin_lock_init(&devpriv->asics[asic].spinlock);
 	}
 
@@ -435,7 +435,7 @@ static int pcmmio_attach(struct comedi_device * dev, struct comedi_devconfig * i
 		s->type = COMEDI_SUBD_DIO;
 		s->insn_bits = pcmmio_dio_insn_bits;
 		s->insn_config = pcmmio_dio_insn_config;
-		s->n_chan = MIN(chans_left, MAX_CHANS_PER_SUBDEV);
+		s->n_chan = min(chans_left, MAX_CHANS_PER_SUBDEV);
 		subpriv->dio.intr.asic = -1;
 		subpriv->dio.intr.first_chan = -1;
 		subpriv->dio.intr.asic_chan = -1;
@@ -489,12 +489,12 @@ static int pcmmio_attach(struct comedi_device * dev, struct comedi_devconfig * i
 
 	for (asic = 0; irq[0] && asic < MAX_ASICS; ++asic) {
 		if (irq[asic]
-			&& comedi_request_irq(irq[asic], interrupt_pcmmio,
+			&& request_irq(irq[asic], interrupt_pcmmio,
 				IRQF_SHARED, thisboard->name, dev)) {
 			int i;
 			/* unroll the allocated irqs.. */
 			for (i = asic - 1; i >= 0; --i) {
-				comedi_free_irq(irq[i], dev);
+				free_irq(irq[i], dev);
 				devpriv->asics[i].irq = irq[i] = 0;
 			}
 			irq[asic] = 0;
@@ -526,7 +526,7 @@ static int pcmmio_attach(struct comedi_device * dev, struct comedi_devconfig * i
  * allocated by _attach().  dev->private and dev->subdevices are
  * deallocated automatically by the core.
  */
-static int pcmmio_detach(struct comedi_device * dev)
+static int pcmmio_detach(struct comedi_device *dev)
 {
 	int i;
 
@@ -536,7 +536,7 @@ static int pcmmio_detach(struct comedi_device * dev)
 
 	for (i = 0; i < MAX_ASICS; ++i) {
 		if (devpriv && devpriv->asics[i].irq)
-			comedi_free_irq(devpriv->asics[i].irq, dev);
+			free_irq(devpriv->asics[i].irq, dev);
 	}
 
 	if (devpriv && devpriv->sprivs)
@@ -550,8 +550,8 @@ static int pcmmio_detach(struct comedi_device * dev)
  * useful to applications if you implement the insn_bits interface.
  * This allows packed reading/writing of the DIO channels.  The
  * comedi core can convert between insn_bits and insn_read/write */
-static int pcmmio_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcmmio_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int byte_no;
 	if (insn->n != 2)
@@ -624,8 +624,8 @@ static int pcmmio_dio_insn_bits(struct comedi_device * dev, struct comedi_subdev
  * configured by a special insn_config instruction.  chanspec
  * contains the channel to be changed, and data[0] contains the
  * value COMEDI_INPUT or COMEDI_OUTPUT. */
-static int pcmmio_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcmmio_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int chan = CR_CHAN(insn->chanspec), byte_no = chan / 8, bit_no =
 		chan % 8;
@@ -685,7 +685,7 @@ static int pcmmio_dio_insn_config(struct comedi_device * dev, struct comedi_subd
 	return insn->n;
 }
 
-static void init_asics(struct comedi_device * dev)
+static void init_asics(struct comedi_device *dev)
 {				/* sets up an
 				   ASIC chip to defaults */
 	int asic;
@@ -722,7 +722,7 @@ static void init_asics(struct comedi_device * dev)
 	}
 }
 
-static void switch_page(struct comedi_device * dev, int asic, int page)
+static void switch_page(struct comedi_device *dev, int asic, int page)
 {
 	if (asic < 0 || asic >= thisboard->dio_num_asics)
 		return;		/* paranoia */
@@ -738,7 +738,7 @@ static void switch_page(struct comedi_device * dev, int asic, int page)
 }
 
 #ifdef notused
-static void lock_port(struct comedi_device * dev, int asic, int port)
+static void lock_port(struct comedi_device *dev, int asic, int port)
 {
 	if (asic < 0 || asic >= thisboard->dio_num_asics)
 		return;		/* paranoia */
@@ -752,7 +752,7 @@ static void lock_port(struct comedi_device * dev, int asic, int port)
 	return;
 }
 
-static void unlock_port(struct comedi_device * dev, int asic, int port)
+static void unlock_port(struct comedi_device *dev, int asic, int port)
 {
 	if (asic < 0 || asic >= thisboard->dio_num_asics)
 		return;		/* paranoia */
@@ -765,7 +765,7 @@ static void unlock_port(struct comedi_device * dev, int asic, int port)
 }
 #endif /* notused */
 
-static irqreturn_t interrupt_pcmmio(int irq, void *d PT_REGS_ARG)
+static irqreturn_t interrupt_pcmmio(int irq, void *d)
 {
 	int asic, got1 = 0;
 	struct comedi_device *dev = (struct comedi_device *) d;
@@ -778,8 +778,7 @@ static irqreturn_t interrupt_pcmmio(int irq, void *d PT_REGS_ARG)
 			/* it is an interrupt for ASIC #asic */
 			unsigned char int_pend;
 
-			comedi_spin_lock_irqsave(&devpriv->asics[asic].spinlock,
-				flags);
+			spin_lock_irqsave(&devpriv->asics[asic].spinlock, flags);
 
 			int_pend = inb(iobase + REG_INT_PENDING) & 0x07;
 
@@ -811,8 +810,7 @@ static irqreturn_t interrupt_pcmmio(int irq, void *d PT_REGS_ARG)
 				++got1;
 			}
 
-			comedi_spin_unlock_irqrestore(&devpriv->asics[asic].
-				spinlock, flags);
+			spin_unlock_irqrestore(&devpriv->asics[asic].  spinlock, flags);
 
 			if (triggered) {
 				struct comedi_subdevice *s;
@@ -825,9 +823,7 @@ static irqreturn_t interrupt_pcmmio(int irq, void *d PT_REGS_ARG)
 						unsigned long flags;
 						unsigned oldevents;
 
-						comedi_spin_lock_irqsave
-							(&subpriv->dio.intr.
-							spinlock, flags);
+						spin_lock_irqsave(&subpriv->dio.intr.spinlock, flags);
 
 						oldevents = s->async->events;
 
@@ -859,10 +855,10 @@ static irqreturn_t interrupt_pcmmio(int irq, void *d PT_REGS_ARG)
 									}
 								}
 								/* Write the scan to the buffer. */
-								if (comedi_buf_put(s->async, ((short *) & val)[0])
+								if (comedi_buf_put(s->async, ((short *) &val)[0])
 									&&
 									comedi_buf_put
-									(s->async, ((short *) & val)[1])) {
+									(s->async, ((short *) &val)[1])) {
 									s->async->events |= (COMEDI_CB_BLOCK | COMEDI_CB_EOS);
 								} else {
 									/* Overflow! Stop acquisition!! */
@@ -896,9 +892,7 @@ static irqreturn_t interrupt_pcmmio(int irq, void *d PT_REGS_ARG)
 							}
 						}
 
-						comedi_spin_unlock_irqrestore
-							(&subpriv->dio.intr.
-							spinlock, flags);
+						spin_unlock_irqrestore(&subpriv->dio.intr.spinlock, flags);
 
 						if (oldevents !=
 							s->async->events) {
@@ -917,11 +911,12 @@ static irqreturn_t interrupt_pcmmio(int irq, void *d PT_REGS_ARG)
 	return IRQ_HANDLED;
 }
 
-static void pcmmio_stop_intr(struct comedi_device * dev, struct comedi_subdevice * s)
+static void pcmmio_stop_intr(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	int nports, firstport, asic, port;
 
-	if ((asic = subpriv->dio.intr.asic) < 0)
+	asic = subpriv->dio.intr.asic;
+	if (asic < 0)
 		return;		/* not an interrupt subdev */
 
 	subpriv->dio.intr.enabled_mask = 0;
@@ -936,7 +931,7 @@ static void pcmmio_stop_intr(struct comedi_device * dev, struct comedi_subdevice
 	}
 }
 
-static int pcmmio_start_intr(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pcmmio_start_intr(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	if (!subpriv->dio.intr.continuous && subpriv->dio.intr.stop_count == 0) {
 		/* An empty acquisition! */
@@ -948,7 +943,8 @@ static int pcmmio_start_intr(struct comedi_device * dev, struct comedi_subdevice
 		int nports, firstport, asic, port;
 		struct comedi_cmd *cmd = &s->async->cmd;
 
-		if ((asic = subpriv->dio.intr.asic) < 0)
+		asic = subpriv->dio.intr.asic;
+		if (asic  < 0)
 			return 1;	/* not an interrupt
 					   subdev */
 		subpriv->dio.intr.enabled_mask = 0;
@@ -995,14 +991,14 @@ static int pcmmio_start_intr(struct comedi_device * dev, struct comedi_subdevice
 	return 0;
 }
 
-static int pcmmio_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pcmmio_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&subpriv->dio.intr.spinlock, flags);
+	spin_lock_irqsave(&subpriv->dio.intr.spinlock, flags);
 	if (subpriv->dio.intr.active)
 		pcmmio_stop_intr(dev, s);
-	comedi_spin_unlock_irqrestore(&subpriv->dio.intr.spinlock, flags);
+	spin_unlock_irqrestore(&subpriv->dio.intr.spinlock, flags);
 
 	return 0;
 }
@@ -1011,7 +1007,7 @@ static int pcmmio_cancel(struct comedi_device * dev, struct comedi_subdevice * s
  * Internal trigger function to start acquisition for an 'INTERRUPT' subdevice.
  */
 static int
-pcmmio_inttrig_start_intr(struct comedi_device * dev, struct comedi_subdevice * s,
+pcmmio_inttrig_start_intr(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int trignum)
 {
 	unsigned long flags;
@@ -1020,12 +1016,12 @@ pcmmio_inttrig_start_intr(struct comedi_device * dev, struct comedi_subdevice *
 	if (trignum != 0)
 		return -EINVAL;
 
-	comedi_spin_lock_irqsave(&subpriv->dio.intr.spinlock, flags);
+	spin_lock_irqsave(&subpriv->dio.intr.spinlock, flags);
 	s->async->inttrig = 0;
 	if (subpriv->dio.intr.active) {
 		event = pcmmio_start_intr(dev, s);
 	}
-	comedi_spin_unlock_irqrestore(&subpriv->dio.intr.spinlock, flags);
+	spin_unlock_irqrestore(&subpriv->dio.intr.spinlock, flags);
 
 	if (event) {
 		comedi_event(dev, s);
@@ -1037,13 +1033,13 @@ pcmmio_inttrig_start_intr(struct comedi_device * dev, struct comedi_subdevice *
 /*
  * 'do_cmd' function for an 'INTERRUPT' subdevice.
  */
-static int pcmmio_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pcmmio_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct comedi_cmd *cmd = &s->async->cmd;
 	unsigned long flags;
 	int event = 0;
 
-	comedi_spin_lock_irqsave(&subpriv->dio.intr.spinlock, flags);
+	spin_lock_irqsave(&subpriv->dio.intr.spinlock, flags);
 	subpriv->dio.intr.active = 1;
 
 	/* Set up end of acquisition. */
@@ -1069,7 +1065,7 @@ static int pcmmio_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 		event = pcmmio_start_intr(dev, s);
 		break;
 	}
-	comedi_spin_unlock_irqrestore(&subpriv->dio.intr.spinlock, flags);
+	spin_unlock_irqrestore(&subpriv->dio.intr.spinlock, flags);
 
 	if (event) {
 		comedi_event(dev, s);
@@ -1078,110 +1074,10 @@ static int pcmmio_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 	return 0;
 }
 
-/*
- * 'do_cmdtest' function for an 'INTERRUPT' subdevice.
- */
 static int
-pcmmio_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s, struct comedi_cmd * cmd)
+pcmmio_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_cmd *cmd)
 {
-	int err = 0;
-	unsigned int tmp;
-
-	/* step 1: make sure trigger sources are trivially valid */
-
-	tmp = cmd->start_src;
-	cmd->start_src &= (TRIG_NOW | TRIG_INT);
-	if (!cmd->start_src || tmp != cmd->start_src)
-		err++;
-
-	tmp = cmd->scan_begin_src;
-	cmd->scan_begin_src &= TRIG_EXT;
-	if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src)
-		err++;
-
-	tmp = cmd->convert_src;
-	cmd->convert_src &= TRIG_NOW;
-	if (!cmd->convert_src || tmp != cmd->convert_src)
-		err++;
-
-	tmp = cmd->scan_end_src;
-	cmd->scan_end_src &= TRIG_COUNT;
-	if (!cmd->scan_end_src || tmp != cmd->scan_end_src)
-		err++;
-
-	tmp = cmd->stop_src;
-	cmd->stop_src &= (TRIG_COUNT | TRIG_NONE);
-	if (!cmd->stop_src || tmp != cmd->stop_src)
-		err++;
-
-	if (err)
-		return 1;
-
-	/* step 2: make sure trigger sources are unique and mutually compatible */
-
-	/* these tests are true if more than one _src bit is set */
-	if ((cmd->start_src & (cmd->start_src - 1)) != 0)
-		err++;
-	if ((cmd->scan_begin_src & (cmd->scan_begin_src - 1)) != 0)
-		err++;
-	if ((cmd->convert_src & (cmd->convert_src - 1)) != 0)
-		err++;
-	if ((cmd->scan_end_src & (cmd->scan_end_src - 1)) != 0)
-		err++;
-	if ((cmd->stop_src & (cmd->stop_src - 1)) != 0)
-		err++;
-
-	if (err)
-		return 2;
-
-	/* step 3: make sure arguments are trivially compatible */
-
-	/* cmd->start_src == TRIG_NOW || cmd->start_src == TRIG_INT */
-	if (cmd->start_arg != 0) {
-		cmd->start_arg = 0;
-		err++;
-	}
-
-	/* cmd->scan_begin_src == TRIG_EXT */
-	if (cmd->scan_begin_arg != 0) {
-		cmd->scan_begin_arg = 0;
-		err++;
-	}
-
-	/* cmd->convert_src == TRIG_NOW */
-	if (cmd->convert_arg != 0) {
-		cmd->convert_arg = 0;
-		err++;
-	}
-
-	/* cmd->scan_end_src == TRIG_COUNT */
-	if (cmd->scan_end_arg != cmd->chanlist_len) {
-		cmd->scan_end_arg = cmd->chanlist_len;
-		err++;
-	}
-
-	switch (cmd->stop_src) {
-	case TRIG_COUNT:
-		/* any count allowed */
-		break;
-	case TRIG_NONE:
-		if (cmd->stop_arg != 0) {
-			cmd->stop_arg = 0;
-			err++;
-		}
-		break;
-	default:
-		break;
-	}
-
-	if (err)
-		return 3;
-
-	/* step 4: fix up any arguments */
-
-	/* if (err) return 4; */
-
-	return 0;
+	return comedi_pcm_cmdtest(dev, s, cmd);
 }
 
 static int adc_wait_ready(unsigned long iobase)
@@ -1194,8 +1090,8 @@ static int adc_wait_ready(unsigned long iobase)
 }
 
 /* All this is for AI and AO */
-static int ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n;
 	unsigned long iobase = subpriv->iobase;
@@ -1258,8 +1154,8 @@ static int ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
 	return n;
 }
 
-static int ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n;
 	for (n = 0; n < insn->n; n++) {
@@ -1288,8 +1184,8 @@ static int wait_dac_ready(unsigned long iobase)
 	return 1;
 }
 
-static int ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n;
 	unsigned iobase = subpriv->iobase, iooffset = 0;
diff --git a/drivers/staging/comedi/drivers/pcmuio.c b/drivers/staging/comedi/drivers/pcmuio.c
index 4e7d8b6327f..81ee7cdc0ca 100644
--- a/drivers/staging/comedi/drivers/pcmuio.c
+++ b/drivers/staging/comedi/drivers/pcmuio.c
@@ -75,11 +75,12 @@ Configuration Options:
   [2] - IRQ for second ASIC (pcmuio96 only - IRQ for chans 48-72 .. can be the same as first irq!)
 */
 
+#include <linux/interrupt.h>
 #include "../comedidev.h"
+#include "pcm_common.h"
 
 #include <linux/pci.h>		/* for PCI devices */
 
-#define MIN(a,b) ( ((a) < (b)) ? (a) : (b) )
 #define CHANS_PER_PORT   8
 #define PORTS_PER_ASIC   6
 #define INTR_PORTS_PER_ASIC   3
@@ -155,14 +156,14 @@ struct pcmuio_board {
 
 static const struct pcmuio_board pcmuio_boards[] = {
 	{
-	      name:	"pcmuio48",
-	      num_asics:1,
-	      num_ports:6,
+	.name = "pcmuio48",
+	.num_asics = 1,
+	.num_ports = 6,
 		},
 	{
-	      name:	"pcmuio96",
-	      num_asics:2,
-	      num_ports:12,
+	.name = "pcmuio96",
+	.num_asics = 2,
+	.num_ports = 12,
 		},
 };
 
@@ -222,14 +223,14 @@ struct pcmuio_private {
  * the board, and also about the kernel module that contains
  * the device code.
  */
-static int pcmuio_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int pcmuio_detach(struct comedi_device * dev);
+static int pcmuio_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int pcmuio_detach(struct comedi_device *dev);
 
 static struct comedi_driver driver = {
-      driver_name:"pcmuio",
-      module:THIS_MODULE,
-      attach:pcmuio_attach,
-      detach:pcmuio_detach,
+	.driver_name = "pcmuio",
+	.module = THIS_MODULE,
+	.attach = pcmuio_attach,
+	.detach = pcmuio_detach,
 /* It is not necessary to implement the following members if you are
  * writing a driver for a ISA PnP or PCI card */
 	/* Most drivers will support multiple types of boards by
@@ -248,29 +249,29 @@ static struct comedi_driver driver = {
 	 * the type of board in software.  ISA PnP, PCI, and PCMCIA
 	 * devices are such boards.
 	 */
-      board_name:&pcmuio_boards[0].name,
-      offset:sizeof(struct pcmuio_board),
-      num_names:sizeof(pcmuio_boards) / sizeof(struct pcmuio_board),
+	.board_name = &pcmuio_boards[0].name,
+	.offset = sizeof(struct pcmuio_board),
+	.num_names = ARRAY_SIZE(pcmuio_boards),
 };
 
-static int pcmuio_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int pcmuio_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int pcmuio_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int pcmuio_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
-static irqreturn_t interrupt_pcmuio(int irq, void *d PT_REGS_ARG);
+static irqreturn_t interrupt_pcmuio(int irq, void *d);
 static void pcmuio_stop_intr(struct comedi_device *, struct comedi_subdevice *);
-static int pcmuio_cancel(struct comedi_device * dev, struct comedi_subdevice * s);
-static int pcmuio_cmd(struct comedi_device * dev, struct comedi_subdevice * s);
-static int pcmuio_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd);
+static int pcmuio_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
+static int pcmuio_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
+static int pcmuio_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd);
 
 /* some helper functions to deal with specifics of this device's registers */
-static void init_asics(struct comedi_device * dev);	/* sets up/clears ASIC chips to defaults */
-static void switch_page(struct comedi_device * dev, int asic, int page);
+static void init_asics(struct comedi_device *dev);	/* sets up/clears ASIC chips to defaults */
+static void switch_page(struct comedi_device *dev, int asic, int page);
 #ifdef notused
-static void lock_port(struct comedi_device * dev, int asic, int port);
-static void unlock_port(struct comedi_device * dev, int asic, int port);
+static void lock_port(struct comedi_device *dev, int asic, int port);
+static void unlock_port(struct comedi_device *dev, int asic, int port);
 #endif
 
 /*
@@ -279,7 +280,7 @@ static void unlock_port(struct comedi_device * dev, int asic, int port);
  * in the driver structure, dev->board_ptr contains that
  * address.
  */
-static int pcmuio_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int pcmuio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	int sdev_no, chans_left, n_subdevs, port, asic, thisasic_chanct = 0;
@@ -322,7 +323,7 @@ static int pcmuio_attach(struct comedi_device * dev, struct comedi_devconfig * i
 		devpriv->asics[asic].iobase = dev->iobase + asic * ASIC_IOSIZE;
 		devpriv->asics[asic].irq = 0;	/* this gets actually set at the end of
 						   this function when we
-						   comedi_request_irqs */
+						   request_irqs */
 		spin_lock_init(&devpriv->asics[asic].spinlock);
 	}
 
@@ -359,7 +360,7 @@ static int pcmuio_attach(struct comedi_device * dev, struct comedi_devconfig * i
 		s->type = COMEDI_SUBD_DIO;
 		s->insn_bits = pcmuio_dio_insn_bits;
 		s->insn_config = pcmuio_dio_insn_config;
-		s->n_chan = MIN(chans_left, MAX_CHANS_PER_SUBDEV);
+		s->n_chan = min(chans_left, MAX_CHANS_PER_SUBDEV);
 		subpriv->intr.asic = -1;
 		subpriv->intr.first_chan = -1;
 		subpriv->intr.asic_chan = -1;
@@ -413,12 +414,12 @@ static int pcmuio_attach(struct comedi_device * dev, struct comedi_devconfig * i
 
 	for (asic = 0; irq[0] && asic < MAX_ASICS; ++asic) {
 		if (irq[asic]
-			&& comedi_request_irq(irq[asic], interrupt_pcmuio,
+			&& request_irq(irq[asic], interrupt_pcmuio,
 				IRQF_SHARED, thisboard->name, dev)) {
 			int i;
 			/* unroll the allocated irqs.. */
 			for (i = asic - 1; i >= 0; --i) {
-				comedi_free_irq(irq[i], dev);
+				free_irq(irq[i], dev);
 				devpriv->asics[i].irq = irq[i] = 0;
 			}
 			irq[asic] = 0;
@@ -450,7 +451,7 @@ static int pcmuio_attach(struct comedi_device * dev, struct comedi_devconfig * i
  * allocated by _attach().  dev->private and dev->subdevices are
  * deallocated automatically by the core.
  */
-static int pcmuio_detach(struct comedi_device * dev)
+static int pcmuio_detach(struct comedi_device *dev)
 {
 	int i;
 
@@ -460,7 +461,7 @@ static int pcmuio_detach(struct comedi_device * dev)
 
 	for (i = 0; i < MAX_ASICS; ++i) {
 		if (devpriv->asics[i].irq)
-			comedi_free_irq(devpriv->asics[i].irq, dev);
+			free_irq(devpriv->asics[i].irq, dev);
 	}
 
 	if (devpriv && devpriv->sprivs)
@@ -474,8 +475,8 @@ static int pcmuio_detach(struct comedi_device * dev)
  * useful to applications if you implement the insn_bits interface.
  * This allows packed reading/writing of the DIO channels.  The
  * comedi core can convert between insn_bits and insn_read/write */
-static int pcmuio_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcmuio_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int byte_no;
 	if (insn->n != 2)
@@ -548,8 +549,8 @@ static int pcmuio_dio_insn_bits(struct comedi_device * dev, struct comedi_subdev
  * configured by a special insn_config instruction.  chanspec
  * contains the channel to be changed, and data[0] contains the
  * value COMEDI_INPUT or COMEDI_OUTPUT. */
-static int pcmuio_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcmuio_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int chan = CR_CHAN(insn->chanspec), byte_no = chan / 8, bit_no =
 		chan % 8;
@@ -609,7 +610,7 @@ static int pcmuio_dio_insn_config(struct comedi_device * dev, struct comedi_subd
 	return insn->n;
 }
 
-static void init_asics(struct comedi_device * dev)
+static void init_asics(struct comedi_device *dev)
 {				/* sets up an
 				   ASIC chip to defaults */
 	int asic;
@@ -646,7 +647,7 @@ static void init_asics(struct comedi_device * dev)
 	}
 }
 
-static void switch_page(struct comedi_device * dev, int asic, int page)
+static void switch_page(struct comedi_device *dev, int asic, int page)
 {
 	if (asic < 0 || asic >= thisboard->num_asics)
 		return;		/* paranoia */
@@ -662,7 +663,7 @@ static void switch_page(struct comedi_device * dev, int asic, int page)
 }
 
 #ifdef notused
-static void lock_port(struct comedi_device * dev, int asic, int port)
+static void lock_port(struct comedi_device *dev, int asic, int port)
 {
 	if (asic < 0 || asic >= thisboard->num_asics)
 		return;		/* paranoia */
@@ -675,7 +676,7 @@ static void lock_port(struct comedi_device * dev, int asic, int port)
 		dev->iobase + ASIC_IOSIZE * asic + REG_PAGELOCK);
 }
 
-static void unlock_port(struct comedi_device * dev, int asic, int port)
+static void unlock_port(struct comedi_device *dev, int asic, int port)
 {
 	if (asic < 0 || asic >= thisboard->num_asics)
 		return;		/* paranoia */
@@ -688,7 +689,7 @@ static void unlock_port(struct comedi_device * dev, int asic, int port)
 }
 #endif /* notused */
 
-static irqreturn_t interrupt_pcmuio(int irq, void *d PT_REGS_ARG)
+static irqreturn_t interrupt_pcmuio(int irq, void *d)
 {
 	int asic, got1 = 0;
 	struct comedi_device *dev = (struct comedi_device *) d;
@@ -701,8 +702,7 @@ static irqreturn_t interrupt_pcmuio(int irq, void *d PT_REGS_ARG)
 			/* it is an interrupt for ASIC #asic */
 			unsigned char int_pend;
 
-			comedi_spin_lock_irqsave(&devpriv->asics[asic].spinlock,
-				flags);
+			spin_lock_irqsave(&devpriv->asics[asic].spinlock, flags);
 
 			int_pend = inb(iobase + REG_INT_PENDING) & 0x07;
 
@@ -734,8 +734,7 @@ static irqreturn_t interrupt_pcmuio(int irq, void *d PT_REGS_ARG)
 				++got1;
 			}
 
-			comedi_spin_unlock_irqrestore(&devpriv->asics[asic].
-				spinlock, flags);
+			spin_unlock_irqrestore(&devpriv->asics[asic].spinlock, flags);
 
 			if (triggered) {
 				struct comedi_subdevice *s;
@@ -748,9 +747,7 @@ static irqreturn_t interrupt_pcmuio(int irq, void *d PT_REGS_ARG)
 						unsigned long flags;
 						unsigned oldevents;
 
-						comedi_spin_lock_irqsave
-							(&subpriv->intr.
-							spinlock, flags);
+						spin_lock_irqsave (&subpriv->intr.spinlock, flags);
 
 						oldevents = s->async->events;
 
@@ -781,10 +778,10 @@ static irqreturn_t interrupt_pcmuio(int irq, void *d PT_REGS_ARG)
 									}
 								}
 								/* Write the scan to the buffer. */
-								if (comedi_buf_put(s->async, ((short *) & val)[0])
+								if (comedi_buf_put(s->async, ((short *) &val)[0])
 									&&
 									comedi_buf_put
-									(s->async, ((short *) & val)[1])) {
+									(s->async, ((short *) &val)[1])) {
 									s->async->events |= (COMEDI_CB_BLOCK | COMEDI_CB_EOS);
 								} else {
 									/* Overflow! Stop acquisition!! */
@@ -816,9 +813,7 @@ static irqreturn_t interrupt_pcmuio(int irq, void *d PT_REGS_ARG)
 							}
 						}
 
-						comedi_spin_unlock_irqrestore
-							(&subpriv->intr.
-							spinlock, flags);
+						spin_unlock_irqrestore(&subpriv->intr.spinlock, flags);
 
 						if (oldevents !=
 							s->async->events) {
@@ -837,11 +832,12 @@ static irqreturn_t interrupt_pcmuio(int irq, void *d PT_REGS_ARG)
 	return IRQ_HANDLED;
 }
 
-static void pcmuio_stop_intr(struct comedi_device * dev, struct comedi_subdevice * s)
+static void pcmuio_stop_intr(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	int nports, firstport, asic, port;
 
-	if ((asic = subpriv->intr.asic) < 0)
+	asic = subpriv->intr.asic;
+	if (asic < 0)
 		return;		/* not an interrupt subdev */
 
 	subpriv->intr.enabled_mask = 0;
@@ -856,7 +852,7 @@ static void pcmuio_stop_intr(struct comedi_device * dev, struct comedi_subdevice
 	}
 }
 
-static int pcmuio_start_intr(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pcmuio_start_intr(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	if (!subpriv->intr.continuous && subpriv->intr.stop_count == 0) {
 		/* An empty acquisition! */
@@ -868,7 +864,8 @@ static int pcmuio_start_intr(struct comedi_device * dev, struct comedi_subdevice
 		int nports, firstport, asic, port;
 		struct comedi_cmd *cmd = &s->async->cmd;
 
-		if ((asic = subpriv->intr.asic) < 0)
+		asic = subpriv->intr.asic;
+		if (asic < 0)
 			return 1;	/* not an interrupt
 					   subdev */
 		subpriv->intr.enabled_mask = 0;
@@ -905,14 +902,14 @@ static int pcmuio_start_intr(struct comedi_device * dev, struct comedi_subdevice
 	return 0;
 }
 
-static int pcmuio_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pcmuio_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	unsigned long flags;
 
-	comedi_spin_lock_irqsave(&subpriv->intr.spinlock, flags);
+	spin_lock_irqsave(&subpriv->intr.spinlock, flags);
 	if (subpriv->intr.active)
 		pcmuio_stop_intr(dev, s);
-	comedi_spin_unlock_irqrestore(&subpriv->intr.spinlock, flags);
+	spin_unlock_irqrestore(&subpriv->intr.spinlock, flags);
 
 	return 0;
 }
@@ -921,7 +918,7 @@ static int pcmuio_cancel(struct comedi_device * dev, struct comedi_subdevice * s
  * Internal trigger function to start acquisition for an 'INTERRUPT' subdevice.
  */
 static int
-pcmuio_inttrig_start_intr(struct comedi_device * dev, struct comedi_subdevice * s,
+pcmuio_inttrig_start_intr(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int trignum)
 {
 	unsigned long flags;
@@ -930,12 +927,12 @@ pcmuio_inttrig_start_intr(struct comedi_device * dev, struct comedi_subdevice *
 	if (trignum != 0)
 		return -EINVAL;
 
-	comedi_spin_lock_irqsave(&subpriv->intr.spinlock, flags);
+	spin_lock_irqsave(&subpriv->intr.spinlock, flags);
 	s->async->inttrig = 0;
 	if (subpriv->intr.active) {
 		event = pcmuio_start_intr(dev, s);
 	}
-	comedi_spin_unlock_irqrestore(&subpriv->intr.spinlock, flags);
+	spin_unlock_irqrestore(&subpriv->intr.spinlock, flags);
 
 	if (event) {
 		comedi_event(dev, s);
@@ -947,13 +944,13 @@ pcmuio_inttrig_start_intr(struct comedi_device * dev, struct comedi_subdevice *
 /*
  * 'do_cmd' function for an 'INTERRUPT' subdevice.
  */
-static int pcmuio_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int pcmuio_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct comedi_cmd *cmd = &s->async->cmd;
 	unsigned long flags;
 	int event = 0;
 
-	comedi_spin_lock_irqsave(&subpriv->intr.spinlock, flags);
+	spin_lock_irqsave(&subpriv->intr.spinlock, flags);
 	subpriv->intr.active = 1;
 
 	/* Set up end of acquisition. */
@@ -979,7 +976,7 @@ static int pcmuio_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 		event = pcmuio_start_intr(dev, s);
 		break;
 	}
-	comedi_spin_unlock_irqrestore(&subpriv->intr.spinlock, flags);
+	spin_unlock_irqrestore(&subpriv->intr.spinlock, flags);
 
 	if (event) {
 		comedi_event(dev, s);
@@ -988,110 +985,10 @@ static int pcmuio_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 	return 0;
 }
 
-/*
- * 'do_cmdtest' function for an 'INTERRUPT' subdevice.
- */
 static int
-pcmuio_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s, struct comedi_cmd * cmd)
+pcmuio_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_cmd *cmd)
 {
-	int err = 0;
-	unsigned int tmp;
-
-	/* step 1: make sure trigger sources are trivially valid */
-
-	tmp = cmd->start_src;
-	cmd->start_src &= (TRIG_NOW | TRIG_INT);
-	if (!cmd->start_src || tmp != cmd->start_src)
-		err++;
-
-	tmp = cmd->scan_begin_src;
-	cmd->scan_begin_src &= TRIG_EXT;
-	if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src)
-		err++;
-
-	tmp = cmd->convert_src;
-	cmd->convert_src &= TRIG_NOW;
-	if (!cmd->convert_src || tmp != cmd->convert_src)
-		err++;
-
-	tmp = cmd->scan_end_src;
-	cmd->scan_end_src &= TRIG_COUNT;
-	if (!cmd->scan_end_src || tmp != cmd->scan_end_src)
-		err++;
-
-	tmp = cmd->stop_src;
-	cmd->stop_src &= (TRIG_COUNT | TRIG_NONE);
-	if (!cmd->stop_src || tmp != cmd->stop_src)
-		err++;
-
-	if (err)
-		return 1;
-
-	/* step 2: make sure trigger sources are unique and mutually compatible */
-
-	/* these tests are true if more than one _src bit is set */
-	if ((cmd->start_src & (cmd->start_src - 1)) != 0)
-		err++;
-	if ((cmd->scan_begin_src & (cmd->scan_begin_src - 1)) != 0)
-		err++;
-	if ((cmd->convert_src & (cmd->convert_src - 1)) != 0)
-		err++;
-	if ((cmd->scan_end_src & (cmd->scan_end_src - 1)) != 0)
-		err++;
-	if ((cmd->stop_src & (cmd->stop_src - 1)) != 0)
-		err++;
-
-	if (err)
-		return 2;
-
-	/* step 3: make sure arguments are trivially compatible */
-
-	/* cmd->start_src == TRIG_NOW || cmd->start_src == TRIG_INT */
-	if (cmd->start_arg != 0) {
-		cmd->start_arg = 0;
-		err++;
-	}
-
-	/* cmd->scan_begin_src == TRIG_EXT */
-	if (cmd->scan_begin_arg != 0) {
-		cmd->scan_begin_arg = 0;
-		err++;
-	}
-
-	/* cmd->convert_src == TRIG_NOW */
-	if (cmd->convert_arg != 0) {
-		cmd->convert_arg = 0;
-		err++;
-	}
-
-	/* cmd->scan_end_src == TRIG_COUNT */
-	if (cmd->scan_end_arg != cmd->chanlist_len) {
-		cmd->scan_end_arg = cmd->chanlist_len;
-		err++;
-	}
-
-	switch (cmd->stop_src) {
-	case TRIG_COUNT:
-		/* any count allowed */
-		break;
-	case TRIG_NONE:
-		if (cmd->stop_arg != 0) {
-			cmd->stop_arg = 0;
-			err++;
-		}
-		break;
-	default:
-		break;
-	}
-
-	if (err)
-		return 3;
-
-	/* step 4: fix up any arguments */
-
-	/* if (err) return 4; */
-
-	return 0;
+	return comedi_pcm_cmdtest(dev, s, cmd);
 }
 
 /*
diff --git a/drivers/staging/comedi/drivers/plx9080.h b/drivers/staging/comedi/drivers/plx9080.h
index 9231ba80203..e4bbd5dc9a6 100644
--- a/drivers/staging/comedi/drivers/plx9080.h
+++ b/drivers/staging/comedi/drivers/plx9080.h
@@ -399,11 +399,11 @@ static inline int plx9080_abort_dma(void *iobase, unsigned int channel)
 
 	/*  wait to make sure done bit is zero */
 	for (i = 0; (dma_status & PLX_DMA_DONE_BIT) && i < timeout; i++) {
-		comedi_udelay(1);
+		udelay(1);
 		dma_status = readb(dma_cs_addr);
 	}
 	if (i == timeout) {
-		rt_printk
+		printk
 			("plx9080: cancel() timed out waiting for dma %i done clear\n",
 			channel);
 		return -ETIMEDOUT;
@@ -413,11 +413,11 @@ static inline int plx9080_abort_dma(void *iobase, unsigned int channel)
 	/*  wait for dma done bit */
 	dma_status = readb(dma_cs_addr);
 	for (i = 0; (dma_status & PLX_DMA_DONE_BIT) == 0 && i < timeout; i++) {
-		comedi_udelay(1);
+		udelay(1);
 		dma_status = readb(dma_cs_addr);
 	}
 	if (i == timeout) {
-		rt_printk
+		printk
 			("plx9080: cancel() timed out waiting for dma %i done set\n",
 			channel);
 		return -ETIMEDOUT;
diff --git a/drivers/staging/comedi/drivers/poc.c b/drivers/staging/comedi/drivers/poc.c
index 8a0bf685493..47850bd1548 100644
--- a/drivers/staging/comedi/drivers/poc.c
+++ b/drivers/staging/comedi/drivers/poc.c
@@ -41,17 +41,17 @@ Configuration options:
 
 #include <linux/ioport.h>
 
-static int poc_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int poc_detach(struct comedi_device * dev);
-static int readback_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-
-static int dac02_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int pcl733_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int pcl734_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int poc_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int poc_detach(struct comedi_device *dev);
+static int readback_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+
+static int dac02_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int pcl733_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int pcl734_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
 struct boarddef_struct {
 	const char *name;
@@ -70,33 +70,33 @@ struct boarddef_struct {
 };
 static const struct boarddef_struct boards[] = {
 	{
-	      name:	"dac02",
-	      iosize:	8,
-			//setup:                dac02_setup,
-	      type:	COMEDI_SUBD_AO,
-	      n_chan:	2,
-	      n_bits:	12,
-	      winsn:	dac02_ao_winsn,
-	      rinsn:	readback_insn,
-	      range:	&range_unknown,
+	.name = "dac02",
+	.iosize = 8,
+			/*	.setup = dac02_setup, */
+	.type = COMEDI_SUBD_AO,
+	.n_chan = 2,
+	.n_bits = 12,
+	.winsn = dac02_ao_winsn,
+	.rinsn = readback_insn,
+	.range = &range_unknown,
 		},
 	{
-	      name:	"pcl733",
-	      iosize:	4,
-	      type:	COMEDI_SUBD_DI,
-	      n_chan:	32,
-	      n_bits:	1,
-	      insnbits:pcl733_insn_bits,
-	      range:	&range_digital,
+	.name = "pcl733",
+	.iosize = 4,
+	.type = COMEDI_SUBD_DI,
+	.n_chan = 32,
+	.n_bits = 1,
+	.insnbits = pcl733_insn_bits,
+	.range = &range_digital,
 		},
 	{
-	      name:	"pcl734",
-	      iosize:	4,
-	      type:	COMEDI_SUBD_DO,
-	      n_chan:	32,
-	      n_bits:	1,
-	      insnbits:pcl734_insn_bits,
-	      range:	&range_digital,
+	.name = "pcl734",
+	.iosize = 4,
+	.type = COMEDI_SUBD_DO,
+	.n_chan = 32,
+	.n_bits = 1,
+	.insnbits = pcl734_insn_bits,
+	.range = &range_digital,
 		},
 };
 
@@ -104,16 +104,16 @@ static const struct boarddef_struct boards[] = {
 #define this_board ((const struct boarddef_struct *)dev->board_ptr)
 
 static struct comedi_driver driver_poc = {
-      driver_name:"poc",
-      module:THIS_MODULE,
-      attach:poc_attach,
-      detach:poc_detach,
-      board_name:&boards[0].name,
-      num_names:n_boards,
-      offset:sizeof(boards[0]),
+	.driver_name = "poc",
+	.module = THIS_MODULE,
+	.attach = poc_attach,
+	.detach = poc_detach,
+	.board_name = &boards[0].name,
+	.num_names = n_boards,
+	.offset = sizeof(boards[0]),
 };
 
-static int poc_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int poc_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	unsigned long iobase;
@@ -159,7 +159,7 @@ static int poc_attach(struct comedi_device * dev, struct comedi_devconfig * it)
 	return 0;
 }
 
-static int poc_detach(struct comedi_device * dev)
+static int poc_detach(struct comedi_device *dev)
 {
 	/* only free stuff if it has been allocated by _attach */
 	if (dev->iobase)
@@ -170,8 +170,8 @@ static int poc_detach(struct comedi_device * dev)
 	return 0;
 }
 
-static int readback_insn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int readback_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int chan;
 
@@ -185,8 +185,8 @@ static int readback_insn(struct comedi_device * dev, struct comedi_subdevice * s
 #define DAC02_LSB(a)	(2 * a)
 #define DAC02_MSB(a)	(2 * a + 1)
 
-static int dac02_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int dac02_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int temp;
 	int chan;
@@ -196,7 +196,7 @@ static int dac02_ao_winsn(struct comedi_device * dev, struct comedi_subdevice *
 	((unsigned int *) dev->private)[chan] = data[0];
 	output = data[0];
 #ifdef wrong
-	// convert to complementary binary if range is bipolar
+	/*  convert to complementary binary if range is bipolar */
 	if ((CR_RANGE(insn->chanspec) & 0x2) == 0)
 		output = ~output;
 #endif
@@ -208,8 +208,8 @@ static int dac02_ao_winsn(struct comedi_device * dev, struct comedi_subdevice *
 	return 1;
 }
 
-static int pcl733_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcl733_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -222,8 +222,8 @@ static int pcl733_insn_bits(struct comedi_device * dev, struct comedi_subdevice
 	return 2;
 }
 
-static int pcl734_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int pcl734_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
index 795c4522867..85b53c93e13 100644
--- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c
+++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
@@ -179,8 +179,8 @@ static struct local_info_t *dev_table[MAX_DEV] = { NULL, /* ... */  };
 #define DAQP_AUX_FIFO_EMPTY		0x01
 
 /* These range structures tell COMEDI how the sample values map to
- * voltages.  The A/D converter has four ranges: +/- 10V through
- * +/- 1.25V, and the D/A converter has only one: +/- 5V.
+ * voltages.  The A/D converter has four	.ranges = +/- 10V through
+ * +/- 1.25V, and the D/A converter has only	.one = +/- 5V.
  */
 
 static const struct comedi_lrange range_daqp_ai = { 4, {
@@ -197,18 +197,18 @@ static const struct comedi_lrange range_daqp_ao = { 1, {BIP_RANGE(5)} };
 
 /* comedi interface code */
 
-static int daqp_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int daqp_detach(struct comedi_device * dev);
+static int daqp_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int daqp_detach(struct comedi_device *dev);
 static struct comedi_driver driver_daqp = {
-      driver_name:"quatech_daqp_cs",
-      module:THIS_MODULE,
-      attach:daqp_attach,
-      detach:daqp_detach,
+	.driver_name = "quatech_daqp_cs",
+	.module = THIS_MODULE,
+	.attach = daqp_attach,
+	.detach = daqp_detach,
 };
 
 #ifdef DAQP_DEBUG
 
-static void daqp_dump(struct comedi_device * dev)
+static void daqp_dump(struct comedi_device *dev)
 {
 	printk("DAQP: status %02x; aux status %02x\n",
 		inb(dev->iobase + DAQP_STATUS), inb(dev->iobase + DAQP_AUX));
@@ -234,7 +234,7 @@ static void hex_dump(char *str, void *ptr, int len)
 
 /* Cancel a running acquisition */
 
-static int daqp_ai_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
+static int daqp_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct local_info_t *local = (struct local_info_t *) s->private;
 
@@ -262,7 +262,7 @@ static int daqp_ai_cancel(struct comedi_device * dev, struct comedi_subdevice *
  * which run pretty quick.
  */
 
-static void daqp_interrupt(int irq, void *dev_id PT_REGS_ARG)
+static void daqp_interrupt(int irq, void *dev_id)
 {
 	struct local_info_t *local = (struct local_info_t *) dev_id;
 	struct comedi_device *dev;
@@ -361,8 +361,8 @@ static void daqp_interrupt(int irq, void *dev_id PT_REGS_ARG)
 
 /* One-shot analog data acquisition routine */
 
-static int daqp_ai_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int daqp_ai_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	struct local_info_t *local = (struct local_info_t *) s->private;
 	int i;
@@ -467,8 +467,8 @@ static int daqp_ns_to_timer(unsigned int *ns, int round)
  * the command passes.
  */
 
-static int daqp_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int daqp_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	int tmp;
@@ -593,7 +593,7 @@ static int daqp_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice *
 	return 0;
 }
 
-static int daqp_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
+static int daqp_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct local_info_t *local = (struct local_info_t *) s->private;
 	struct comedi_cmd *cmd = &s->async->cmd;
@@ -793,8 +793,8 @@ static int daqp_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s)
 
 /* Single-shot analog output routine */
 
-static int daqp_ao_insn_write(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int daqp_ao_insn_write(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	struct local_info_t *local = (struct local_info_t *) s->private;
 	int d;
@@ -820,8 +820,8 @@ static int daqp_ao_insn_write(struct comedi_device * dev, struct comedi_subdevic
 
 /* Digital input routine */
 
-static int daqp_di_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int daqp_di_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	struct local_info_t *local = (struct local_info_t *) s->private;
 
@@ -836,8 +836,8 @@ static int daqp_di_insn_read(struct comedi_device * dev, struct comedi_subdevice
 
 /* Digital output routine */
 
-static int daqp_do_insn_write(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int daqp_do_insn_write(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	struct local_info_t *local = (struct local_info_t *) s->private;
 
@@ -856,7 +856,7 @@ static int daqp_do_insn_write(struct comedi_device * dev, struct comedi_subdevic
  * when it is inserted.
  */
 
-static int daqp_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int daqp_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int ret;
 	struct local_info_t *local = dev_table[it->options[0]];
@@ -908,7 +908,8 @@ static int daqp_attach(struct comedi_device * dev, struct comedi_devconfig * it)
 
 	dev->iobase = local->link->io.BasePort1;
 
-	if ((ret = alloc_subdevices(dev, 4)) < 0)
+	ret = alloc_subdevices(dev, 4);
+	if (ret < 0)
 		return ret;
 
 	printk("comedi%d: attaching daqp%d (io 0x%04lx)\n",
@@ -962,7 +963,7 @@ static int daqp_attach(struct comedi_device * dev, struct comedi_devconfig * it)
  * card is removed, daqp_cs_detach() is called by the pcmcia subsystem.
  */
 
-static int daqp_detach(struct comedi_device * dev)
+static int daqp_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: detaching daqp\n", dev->minor);
 
@@ -1149,15 +1150,21 @@ static void daqp_cs_config(struct pcmcia_device *link)
 	tuple.TupleData = buf;
 	tuple.TupleDataMax = sizeof(buf);
 	tuple.TupleOffset = 0;
-	if ((last_ret = pcmcia_get_first_tuple(link, &tuple))) {
+
+	last_ret = pcmcia_get_first_tuple(link, &tuple);
+	if (last_ret) {
 		cs_error(link, GetFirstTuple, last_ret);
 		goto cs_failed;
 	}
-	if ((last_ret = pcmcia_get_tuple_data(link, &tuple))) {
+
+	last_ret = pcmcia_get_tuple_data(link, &tuple);
+	if (last_ret) {
 		cs_error(link, GetTupleData, last_ret);
 		goto cs_failed;
 	}
-	if ((last_ret = pcmcia_parse_tuple(&tuple, &parse))) {
+
+	last_ret = pcmcia_parse_tuple(&tuple, &parse);
+	if (last_ret) {
 		cs_error(link, ParseTuple, last_ret);
 		goto cs_failed;
 	}
@@ -1177,10 +1184,12 @@ static void daqp_cs_config(struct pcmcia_device *link)
 	   will only use the CIS to fill in implementation-defined details.
 	 */
 	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-	if ((last_ret = pcmcia_get_first_tuple(link, &tuple))) {
+	last_ret = pcmcia_get_first_tuple(link, &tuple);
+	if (last_ret) {
 		cs_error(link, GetFirstTuple, last_ret);
 		goto cs_failed;
 	}
+
 	while (1) {
 		cistpl_cftable_entry_t dflt = { 0 };
 		cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
@@ -1226,7 +1235,8 @@ static void daqp_cs_config(struct pcmcia_device *link)
 		break;
 
 	      next_entry:
-		if ((last_ret = pcmcia_get_next_tuple(link, &tuple))) {
+		last_ret = pcmcia_get_next_tuple(link, &tuple);
+		if (last_ret) {
 			cs_error(link, GetNextTuple, last_ret);
 			goto cs_failed;
 		}
@@ -1237,18 +1247,21 @@ static void daqp_cs_config(struct pcmcia_device *link)
 	   handler to the interrupt, unless the 'Handler' member of the
 	   irq structure is initialized.
 	 */
-	if (link->conf.Attributes & CONF_ENABLE_IRQ)
-		if ((last_ret = pcmcia_request_irq(link, &link->irq))) {
+	if (link->conf.Attributes & CONF_ENABLE_IRQ) {
+		last_ret = pcmcia_request_irq(link, &link->irq);
+		if (last_ret) {
 			cs_error(link, RequestIRQ, last_ret);
 			goto cs_failed;
 		}
+	}
 
 	/*
 	   This actually configures the PCMCIA socket -- setting up
 	   the I/O windows and the interrupt mapping, and putting the
 	   card and host interface into "Memory and IO" mode.
 	 */
-	if ((last_ret = pcmcia_request_configuration(link, &link->conf))) {
+	last_ret = pcmcia_request_configuration(link, &link->conf);
+	if (last_ret) {
 		cs_error(link, RequestConfiguration, last_ret);
 		goto cs_failed;
 	}
diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
index ca347f21d14..243ee76c836 100644
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -101,6 +101,7 @@ Configuration options:
 
 */
 
+#include <linux/interrupt.h>
 #include <linux/delay.h>
 
 #include "../comedidev.h"
@@ -135,7 +136,7 @@ Configuration options:
 #define RTD_DMA_TIMEOUT	33000	/* 1 msec */
 #else
 /* by delaying, power and electrical noise are reduced somewhat */
-#define WAIT_QUIETLY	comedi_udelay (1)
+#define WAIT_QUIETLY	udelay (1)
 #define RTD_ADC_TIMEOUT	2000	/* in usec */
 #define RTD_DAC_TIMEOUT	2000	/* in usec */
 #define RTD_DMA_TIMEOUT	1000	/* in usec */
@@ -278,22 +279,22 @@ struct rtdBoard {
 
 static const struct rtdBoard rtd520Boards[] = {
 	{
-	      name:	"DM7520",
-	      device_id : 0x7520,
-	      aiChans:	16,
-	      aiBits:	12,
-	      aiMaxGain:32,
-	      range10Start:6,
-	      rangeUniStart:12,
+	.name = "DM7520",
+	.device_id = 0x7520,
+	.aiChans = 16,
+	.aiBits = 12,
+	.aiMaxGain = 32,
+	.range10Start = 6,
+	.rangeUniStart = 12,
 		},
 	{
-	      name:	"PCI4520",
-	      device_id : 0x4520,
-	      aiChans:	16,
-	      aiBits:	12,
-	      aiMaxGain:128,
-	      range10Start:8,
-	      rangeUniStart:16,
+	.name = "PCI4520",
+	.device_id = 0x4520,
+	.aiChans = 16,
+	.aiBits = 12,
+	.aiMaxGain = 128,
+	.range10Start = 8,
+	.rangeUniStart = 16,
 		},
 };
 
@@ -684,10 +685,10 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it);
 static int rtd_detach(struct comedi_device *dev);
 
 static struct comedi_driver rtd520Driver = {
-      driver_name: DRV_NAME,
-      module : THIS_MODULE,
-      attach : rtd_attach,
-      detach : rtd_detach,
+	.driver_name = DRV_NAME,
+	.module = THIS_MODULE,
+	.attach = rtd_attach,
+	.detach = rtd_detach,
 };
 
 static int rtd_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
@@ -706,7 +707,7 @@ static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
 static int rtd_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
 /* static int rtd_ai_poll (struct comedi_device *dev,struct comedi_subdevice *s); */
 static int rtd_ns_to_timer(unsigned int *ns, int roundMode);
-static irqreturn_t rtd_interrupt(int irq, void *d PT_REGS_ARG);
+static irqreturn_t rtd_interrupt(int irq, void *d);
 static int rtd520_probe_fifo_depth(struct comedi_device *dev);
 
 /*
@@ -757,15 +758,15 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 				continue;
 			}
 		}
-		for(i = 0; i < sizeof(rtd520Boards) / sizeof(rtd520Boards[0]); ++i)
+		for (i = 0; i < ARRAY_SIZE(rtd520Boards); ++i)
 		{
-			if(pcidev->device == rtd520Boards[i].device_id)
+			if (pcidev->device == rtd520Boards[i].device_id)
 			{
 				dev->board_ptr = &rtd520Boards[i];
 				break;
 			}
 		}
-		if(dev->board_ptr) break;	/* found one */
+		if (dev->board_ptr) break;	/* found one */
 	}
 	if (!pcidev) {
 		if (it->options[0] && it->options[1]) {
@@ -900,7 +901,7 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	/* initialize board, per RTD spec */
 	/* also, initialize shadow registers */
 	RtdResetBoard(dev);
-	comedi_udelay(100);	/* needed? */
+	udelay(100);	/* needed? */
 	RtdPlxInterruptWrite(dev, 0);
 	RtdInterruptMask(dev, 0);	/* and sets shadow */
 	RtdInterruptClearMask(dev, ~0);	/* and sets shadow */
@@ -919,7 +920,7 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	/* TODO: set user out source ??? */
 
 	/* check if our interrupt is available and get it */
-	ret = comedi_request_irq(devpriv->pci_dev->irq, rtd_interrupt,
+	ret = request_irq(devpriv->pci_dev->irq, rtd_interrupt,
 				 IRQF_SHARED, DRV_NAME, dev);
 
 	if (ret < 0) {
@@ -931,7 +932,7 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	printk("( irq=%u )", dev->irq);
 
 	ret = rtd520_probe_fifo_depth(dev);
-	if(ret < 0) {
+	if (ret < 0) {
 		return ret;
 	}
 	devpriv->fifoLen = ret;
@@ -1032,7 +1033,7 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		/* disable interrupt controller */
 		RtdPlxInterruptWrite(dev, RtdPlxInterruptRead(dev)
 			& ~(ICS_PLIE | ICS_DMA0_E | ICS_DMA1_E));
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 	}
 
 	/* release all regions that were allocated */
@@ -1111,7 +1112,7 @@ static int rtd_detach(struct comedi_device *dev)
 			/* disable interrupt controller */
 			RtdPlxInterruptWrite(dev, RtdPlxInterruptRead(dev)
 				& ~(ICS_PLIE | ICS_DMA0_E | ICS_DMA1_E));
-			comedi_free_irq(dev->irq, dev);
+			free_irq(dev->irq, dev);
 		}
 
 		/* release all regions that were allocated */
@@ -1224,22 +1225,22 @@ static int rtd520_probe_fifo_depth(struct comedi_device *dev)
 		unsigned fifo_status;
 		/* trigger conversion */
 		RtdAdcStart(dev);
-		comedi_udelay(1);
+		udelay(1);
 		fifo_status = RtdFifoStatus(dev);
-		if((fifo_status & FS_ADC_HEMPTY) == 0) {
+		if ((fifo_status & FS_ADC_HEMPTY) == 0) {
 			fifo_size = 2 * i;
 			break;
 		}
 	}
-	if(i == limit)
+	if (i == limit)
 	{
-		rt_printk("\ncomedi: %s: failed to probe fifo size.\n", DRV_NAME);
+		printk("\ncomedi: %s: failed to probe fifo size.\n", DRV_NAME);
 		return -EIO;
 	}
 	RtdAdcClearFifo(dev);
-	if(fifo_size != 0x400 && fifo_size != 0x2000)
+	if (fifo_size != 0x400 && fifo_size != 0x2000)
 	{
-		rt_printk("\ncomedi: %s: unexpected fifo size of %i, expected 1024 or 8192.\n",
+		printk("\ncomedi: %s: unexpected fifo size of %i, expected 1024 or 8192.\n",
 			DRV_NAME, fifo_size);
 		return -EIO;
 	}
@@ -1386,7 +1387,7 @@ void abort_dma(struct comedi_device *dev, unsigned int channel)
 		+ ((channel == 0) ? LCFG_DMACSR0 : LCFG_DMACSR1);
 
 	/*  spinlock for plx dma control/status reg */
-	/* comedi_spin_lock_irqsave( &dev->spinlock, flags ); */
+	/* spin_lock_irqsave( &dev->spinlock, flags ); */
 
 	/*  abort dma transfer if necessary */
 	status = readb(dma_cs_addr);
@@ -1409,7 +1410,7 @@ void abort_dma(struct comedi_device *dev, unsigned int channel)
 
 	/* disable channel (required) */
 	writeb(0, dma_cs_addr);
-	comedi_udelay(1);	/* needed?? */
+	udelay(1);	/* needed?? */
 	/* set abort bit for channel */
 	writeb(PLX_DMA_ABORT_BIT, dma_cs_addr);
 
@@ -1427,7 +1428,7 @@ void abort_dma(struct comedi_device *dev, unsigned int channel)
 	}
 
       abortDmaExit:
-	/* comedi_spin_unlock_irqrestore( &dev->spinlock, flags ); */
+	/* spin_unlock_irqrestore( &dev->spinlock, flags ); */
 }
 
 /*
@@ -1494,8 +1495,7 @@ static int ai_process_dma(struct comedi_device *dev, struct comedi_subdevice *s)
   The data conversion may someday happen in a "bottom half".
 */
 static irqreturn_t rtd_interrupt(int irq,	/* interrupt number (ignored) */
-	void *d			/* our data */
-	PT_REGS_ARG)
+	void *d)		/* our data */
 {				/* cpu context (ignored) */
 	struct comedi_device *dev = d;	/* must be called "dev" for devpriv */
 	u16 status;
diff --git a/drivers/staging/comedi/drivers/rti800.c b/drivers/staging/comedi/drivers/rti800.c
index 334ac5773a1..f1b7e0252f1 100644
--- a/drivers/staging/comedi/drivers/rti800.c
+++ b/drivers/staging/comedi/drivers/rti800.c
@@ -52,6 +52,7 @@ Configuration options:
   [8] - DAC 1 encoding (same as DAC 0)
 */
 
+#include <linux/interrupt.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
@@ -89,8 +90,8 @@ Configuration options:
 
 #define Am9513_8BITBUS
 
-#define Am9513_output_control(a)	outb(a,dev->iobase+RTI800_9513A_CNTRL)
-#define Am9513_output_data(a)		outb(a,dev->iobase+RTI800_9513A_DATA)
+#define Am9513_output_control(a)	outb(a, dev->iobase+RTI800_9513A_CNTRL)
+#define Am9513_output_data(a)		outb(a, dev->iobase+RTI800_9513A_DATA)
 #define Am9513_input_data()		inb(dev->iobase+RTI800_9513A_DATA)
 #define Am9513_input_status()		inb(dev->iobase+RTI800_9513A_STATUS)
 
@@ -131,21 +132,21 @@ static const struct rti800_board boardtypes[] = {
 
 #define this_board ((const struct rti800_board *)dev->board_ptr)
 
-static int rti800_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int rti800_detach(struct comedi_device * dev);
+static int rti800_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int rti800_detach(struct comedi_device *dev);
 static struct comedi_driver driver_rti800 = {
-      driver_name:"rti800",
-      module:THIS_MODULE,
-      attach:rti800_attach,
-      detach:rti800_detach,
-      num_names:sizeof(boardtypes) / sizeof(struct rti800_board),
-      board_name:&boardtypes[0].name,
-      offset:sizeof(struct rti800_board),
+	.driver_name = "rti800",
+	.module = THIS_MODULE,
+	.attach = rti800_attach,
+	.detach = rti800_detach,
+	.num_names = ARRAY_SIZE(boardtypes),
+	.board_name = &boardtypes[0].name,
+	.offset = sizeof(struct rti800_board),
 };
 
 COMEDI_INITCLEANUP(driver_rti800);
 
-static irqreturn_t rti800_interrupt(int irq, void *dev PT_REGS_ARG);
+static irqreturn_t rti800_interrupt(int irq, void *dev);
 
 struct rti800_private {
 	enum {
@@ -172,16 +173,16 @@ struct rti800_private {
 
 #define RTI800_TIMEOUT 100
 
-static irqreturn_t rti800_interrupt(int irq, void *dev PT_REGS_ARG)
+static irqreturn_t rti800_interrupt(int irq, void *dev)
 {
 	return IRQ_HANDLED;
 }
 
-// settling delay times in usec for different gains
+/* settling delay times in usec for different gains */
 static const int gaindelay[] = { 10, 20, 40, 80 };
 
-static int rti800_ai_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int rti800_ai_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i, t;
 	int status;
@@ -199,9 +200,8 @@ static int rti800_ai_insn_read(struct comedi_device * dev, struct comedi_subdevi
 		/* without a delay here, the RTI_OVERRUN bit
 		 * gets set, and you will have an error. */
 		if (insn->n > 0) {
-			BUG_ON(gain >=
-				sizeof(gaindelay) / sizeof(gaindelay[0]));
-			comedi_udelay(gaindelay[gain]);
+			BUG_ON(gain >= ARRAY_SIZE(gaindelay));
+			udelay(gaindelay[gain]);
 		}
 	}
 
@@ -210,16 +210,16 @@ static int rti800_ai_insn_read(struct comedi_device * dev, struct comedi_subdevi
 		for (t = RTI800_TIMEOUT; t; t--) {
 			status = inb(dev->iobase + RTI800_CSR);
 			if (status & RTI800_OVERRUN) {
-				rt_printk("rti800: a/d overrun\n");
+				printk("rti800: a/d overrun\n");
 				outb(0, dev->iobase + RTI800_CLRFLAGS);
 				return -EIO;
 			}
 			if (status & RTI800_DONE)
 				break;
-			comedi_udelay(1);
+			udelay(1);
 		}
 		if (t == 0) {
-			rt_printk("rti800: timeout\n");
+			printk("rti800: timeout\n");
 			return -ETIME;
 		}
 		data[i] = inb(dev->iobase + RTI800_ADCLO);
@@ -233,8 +233,8 @@ static int rti800_ai_insn_read(struct comedi_device * dev, struct comedi_subdevi
 	return i;
 }
 
-static int rti800_ao_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int rti800_ao_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
@@ -245,8 +245,8 @@ static int rti800_ao_insn_read(struct comedi_device * dev, struct comedi_subdevi
 	return i;
 }
 
-static int rti800_ao_insn_write(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int rti800_ao_insn_write(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int chan = CR_CHAN(insn->chanspec);
 	int d;
@@ -265,8 +265,8 @@ static int rti800_ao_insn_write(struct comedi_device * dev, struct comedi_subdev
 	return i;
 }
 
-static int rti800_di_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int rti800_di_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -274,8 +274,8 @@ static int rti800_di_insn_bits(struct comedi_device * dev, struct comedi_subdevi
 	return 2;
 }
 
-static int rti800_do_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int rti800_do_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -309,7 +309,7 @@ static int rti800_do_insn_bits(struct comedi_device * dev, struct comedi_subdevi
    options[8] - dac1 coding
  */
 
-static int rti800_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int rti800_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	unsigned int irq;
 	unsigned long iobase;
@@ -339,8 +339,8 @@ static int rti800_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	irq = it->options[1];
 	if (irq) {
 		printk("( irq = %u )", irq);
-		if ((ret = comedi_request_irq(irq, rti800_interrupt, 0,
-					"rti800", dev)) < 0) {
+		ret = request_irq(irq, rti800_interrupt, 0, "rti800", dev);
+		if (ret < 0) {
 			printk(" Failed to allocate IRQ\n");
 			return ret;
 		}
@@ -351,9 +351,12 @@ static int rti800_attach(struct comedi_device * dev, struct comedi_devconfig * i
 
 	dev->board_name = this_board->name;
 
-	if ((ret = alloc_subdevices(dev, 4)) < 0)
+	ret = alloc_subdevices(dev, 4);
+	if (ret < 0)
 		return ret;
-	if ((ret = alloc_private(dev, sizeof(struct rti800_private))) < 0)
+
+	ret = alloc_private(dev, sizeof(struct rti800_private));
+	if (ret < 0)
 		return ret;
 
 	devpriv->adc_mux = it->options[2];
@@ -444,7 +447,7 @@ static int rti800_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	return 0;
 }
 
-static int rti800_detach(struct comedi_device * dev)
+static int rti800_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: rti800: remove\n", dev->minor);
 
@@ -452,7 +455,7 @@ static int rti800_detach(struct comedi_device * dev)
 		release_region(dev->iobase, RTI800_SIZE);
 
 	if (dev->irq)
-		comedi_free_irq(dev->irq, dev);
+		free_irq(dev->irq, dev);
 
 	return 0;
 }
diff --git a/drivers/staging/comedi/drivers/rti802.c b/drivers/staging/comedi/drivers/rti802.c
index cc2c385db0b..fffde45a352 100644
--- a/drivers/staging/comedi/drivers/rti802.c
+++ b/drivers/staging/comedi/drivers/rti802.c
@@ -47,13 +47,13 @@ Configuration Options:
 #define RTI802_DATALOW 1
 #define RTI802_DATAHIGH 2
 
-static int rti802_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int rti802_detach(struct comedi_device * dev);
+static int rti802_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int rti802_detach(struct comedi_device *dev);
 static struct comedi_driver driver_rti802 = {
-      driver_name:"rti802",
-      module:THIS_MODULE,
-      attach:rti802_attach,
-      detach:rti802_detach,
+	.driver_name = "rti802",
+	.module = THIS_MODULE,
+	.attach = rti802_attach,
+	.detach = rti802_detach,
 };
 
 COMEDI_INITCLEANUP(driver_rti802);
@@ -68,8 +68,8 @@ struct rti802_private {
 
 #define devpriv ((struct rti802_private *)dev->private)
 
-static int rti802_ao_insn_read(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int rti802_ao_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 
@@ -79,8 +79,8 @@ static int rti802_ao_insn_read(struct comedi_device * dev, struct comedi_subdevi
 	return i;
 }
 
-static int rti802_ao_insn_write(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int rti802_ao_insn_write(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i, d;
 	int chan = CR_CHAN(insn->chanspec);
@@ -96,7 +96,7 @@ static int rti802_ao_insn_write(struct comedi_device * dev, struct comedi_subdev
 	return i;
 }
 
-static int rti802_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int rti802_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	int i;
@@ -140,7 +140,7 @@ static int rti802_attach(struct comedi_device * dev, struct comedi_devconfig * i
 	return 0;
 }
 
-static int rti802_detach(struct comedi_device * dev)
+static int rti802_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: rti802: remove\n", dev->minor);
 
diff --git a/drivers/staging/comedi/drivers/s526.c b/drivers/staging/comedi/drivers/s526.c
index a7b6f711afc..d9509d7a328 100644
--- a/drivers/staging/comedi/drivers/s526.c
+++ b/drivers/staging/comedi/drivers/s526.c
@@ -169,14 +169,14 @@ struct s526_board {
 
 static const struct s526_board s526_boards[] = {
 	{
-	      name:	"s526",
-	      gpct_chans:4,
-	      gpct_bits:24,
-	      ad_chans:8,
-	      ad_bits:	16,
-	      da_chans:4,
-	      da_bits:	16,
-	      have_dio:1,
+	.name = "s526",
+	.gpct_chans = 4,
+	.gpct_bits = 24,
+	.ad_chans = 8,
+	.ad_bits = 16,
+	.da_chans = 4,
+	.da_bits = 16,
+	.have_dio = 1,
 		}
 };
 
@@ -217,13 +217,13 @@ struct s526_private {
  * the board, and also about the kernel module that contains
  * the device code.
  */
-static int s526_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int s526_detach(struct comedi_device * dev);
+static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int s526_detach(struct comedi_device *dev);
 static struct comedi_driver driver_s526 = {
-      driver_name:"s526",
-      module:THIS_MODULE,
-      attach:s526_attach,
-      detach:s526_detach,
+	.driver_name = "s526",
+	.module = THIS_MODULE,
+	.attach = s526_attach,
+	.detach = s526_detach,
 /* It is not necessary to implement the following members if you are
  * writing a driver for a ISA PnP or PCI card */
 	/* Most drivers will support multiple types of boards by
@@ -242,29 +242,29 @@ static struct comedi_driver driver_s526 = {
 	 * the type of board in software.  ISA PnP, PCI, and PCMCIA
 	 * devices are such boards.
 	 */
-      board_name:&s526_boards[0].name,
-      offset:sizeof(struct s526_board),
-      num_names:sizeof(s526_boards) / sizeof(struct s526_board),
+	.board_name = &s526_boards[0].name,
+	.offset = sizeof(struct s526_board),
+	.num_names = ARRAY_SIZE(s526_boards),
 };
 
-static int s526_gpct_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int s526_gpct_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int s526_gpct_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int s526_ai_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int s526_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int s526_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int s526_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int s526_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int s526_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int s526_gpct_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int s526_gpct_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int s526_gpct_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int s526_ai_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int s526_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int s526_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int s526_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int s526_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int s526_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
 /*
  * Attach is called by the Comedi core to configure the driver
@@ -272,13 +272,13 @@ static int s526_dio_insn_config(struct comedi_device * dev, struct comedi_subdev
  * in the driver structure, dev->board_ptr contains that
  * address.
  */
-static int s526_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	int iobase;
 	int i, n;
-//      short value;
-//      int subdev_channel = 0;
+/* short value; */
+/* int subdev_channel = 0; */
 
 	printk("comedi%d: s526: ", dev->minor);
 
@@ -334,12 +334,12 @@ static int s526_attach(struct comedi_device * dev, struct comedi_devconfig * it)
 	/* Command are not implemented yet, however they are necessary to
 	   allocate the necessary memory for the comedi_async struct (used
 	   to trigger the GPCT in case of pulsegenerator function */
-	//s->do_cmd = s526_gpct_cmd;
-	//s->do_cmdtest = s526_gpct_cmdtest;
-	//s->cancel = s526_gpct_cancel;
+	/* s->do_cmd = s526_gpct_cmd; */
+	/* s->do_cmdtest = s526_gpct_cmdtest; */
+	/* s->cancel = s526_gpct_cancel; */
 
 	s = dev->subdevices + 1;
-	//dev->read_subdev=s;
+	/* dev->read_subdev=s; */
 	/* analog input subdevice */
 	s->type = COMEDI_SUBD_AI;
 	/* we support differential */
@@ -383,18 +383,18 @@ static int s526_attach(struct comedi_device * dev, struct comedi_devconfig * it)
 	return 1;
 
 #if 0
-	// Example of Counter Application
-	//One-shot (software trigger)
-	cmReg.reg.coutSource = 0;	// out RCAP
-	cmReg.reg.coutPolarity = 1;	// Polarity inverted
-	cmReg.reg.autoLoadResetRcap = 1;	// Auto load 0:disabled, 1:enabled
-	cmReg.reg.hwCtEnableSource = 3;	// NOT RCAP
-	cmReg.reg.ctEnableCtrl = 2;	// Hardware
-	cmReg.reg.clockSource = 2;	// Internal
-	cmReg.reg.countDir = 1;	// Down
-	cmReg.reg.countDirCtrl = 1;	// Software
-	cmReg.reg.outputRegLatchCtrl = 0;	// latch on read
-	cmReg.reg.preloadRegSel = 0;	// PR0
+	/*  Example of Counter Application */
+	/* One-shot (software trigger) */
+	cmReg.reg.coutSource = 0;	/*  out RCAP */
+	cmReg.reg.coutPolarity = 1;	/*  Polarity inverted */
+	cmReg.reg.autoLoadResetRcap = 1;	/*  Auto load 0:disabled, 1:enabled */
+	cmReg.reg.hwCtEnableSource = 3;	/*  NOT RCAP */
+	cmReg.reg.ctEnableCtrl = 2;	/*  Hardware */
+	cmReg.reg.clockSource = 2;	/*  Internal */
+	cmReg.reg.countDir = 1;	/*  Down */
+	cmReg.reg.countDirCtrl = 1;	/*  Software */
+	cmReg.reg.outputRegLatchCtrl = 0;	/*  latch on read */
+	cmReg.reg.preloadRegSel = 0;	/*  PR0 */
 	cmReg.reg.reserved = 0;
 
 	outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
@@ -402,24 +402,24 @@ static int s526_attach(struct comedi_device * dev, struct comedi_devconfig * it)
 	outw(0x0001, ADDR_CHAN_REG(REG_C0H, subdev_channel));
 	outw(0x3C68, ADDR_CHAN_REG(REG_C0L, subdev_channel));
 
-	outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel));	// Reset the counter
-	outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel));	// Load the counter from PR0
+	outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel));	/*  Reset the counter */
+	outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel));	/*  Load the counter from PR0 */
 
-	outw(0x0008, ADDR_CHAN_REG(REG_C0C, subdev_channel));	// Reset RCAP (fires one-shot)
+	outw(0x0008, ADDR_CHAN_REG(REG_C0C, subdev_channel));	/*  Reset RCAP (fires one-shot) */
 
 #else
 
-	// Set Counter Mode Register
-	cmReg.reg.coutSource = 0;	// out RCAP
-	cmReg.reg.coutPolarity = 0;	// Polarity inverted
-	cmReg.reg.autoLoadResetRcap = 0;	// Auto load disabled
-	cmReg.reg.hwCtEnableSource = 2;	// NOT RCAP
-	cmReg.reg.ctEnableCtrl = 1;	// 1: Software,  >1 : Hardware
-	cmReg.reg.clockSource = 3;	// x4
-	cmReg.reg.countDir = 0;	// up
-	cmReg.reg.countDirCtrl = 0;	// quadrature
-	cmReg.reg.outputRegLatchCtrl = 0;	// latch on read
-	cmReg.reg.preloadRegSel = 0;	// PR0
+	/*  Set Counter Mode Register */
+	cmReg.reg.coutSource = 0;	/*  out RCAP */
+	cmReg.reg.coutPolarity = 0;	/*  Polarity inverted */
+	cmReg.reg.autoLoadResetRcap = 0;	/*  Auto load disabled */
+	cmReg.reg.hwCtEnableSource = 2;	/*  NOT RCAP */
+	cmReg.reg.ctEnableCtrl = 1;	/*  1: Software,  >1 : Hardware */
+	cmReg.reg.clockSource = 3;	/*  x4 */
+	cmReg.reg.countDir = 0;	/*  up */
+	cmReg.reg.countDirCtrl = 0;	/*  quadrature */
+	cmReg.reg.outputRegLatchCtrl = 0;	/*  latch on read */
+	cmReg.reg.preloadRegSel = 0;	/*  PR0 */
 	cmReg.reg.reserved = 0;
 
 	n = 0;
@@ -429,21 +429,21 @@ static int s526_attach(struct comedi_device * dev, struct comedi_devconfig * it)
 	udelay(1000);
 	printk("Read back mode reg=0x%04x\n", inw(ADDR_CHAN_REG(REG_C0M, n)));
 
-	// Load the pre-laod register high word
-//                      value = (short) (0x55);
-//                      outw(value, ADDR_CHAN_REG(REG_C0H, n));
+	/*  Load the pre-laod register high word */
+/* value = (short) (0x55); */
+/* outw(value, ADDR_CHAN_REG(REG_C0H, n)); */
 
-	// Load the pre-laod register low word
-//                      value = (short)(0xaa55);
-//                      outw(value, ADDR_CHAN_REG(REG_C0L, n));
+	/*  Load the pre-laod register low word */
+/* value = (short)(0xaa55); */
+/* outw(value, ADDR_CHAN_REG(REG_C0L, n)); */
 
-	// Write the Counter Control Register
-//                      outw(value, ADDR_CHAN_REG(REG_C0C, 0));
+	/*  Write the Counter Control Register */
+/* outw(value, ADDR_CHAN_REG(REG_C0C, 0)); */
 
-	// Reset the counter if it is software preload
+	/*  Reset the counter if it is software preload */
 	if (cmReg.reg.autoLoadResetRcap == 0) {
-		outw(0x8000, ADDR_CHAN_REG(REG_C0C, n));	// Reset the counter
-		outw(0x4000, ADDR_CHAN_REG(REG_C0C, n));	// Load the counter from PR0
+		outw(0x8000, ADDR_CHAN_REG(REG_C0C, n));	/*  Reset the counter */
+		outw(0x4000, ADDR_CHAN_REG(REG_C0C, n));	/*  Load the counter from PR0 */
 	}
 
 	outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, n));
@@ -468,7 +468,7 @@ static int s526_attach(struct comedi_device * dev, struct comedi_devconfig * it)
  * allocated by _attach().  dev->private and dev->subdevices are
  * deallocated automatically by the core.
  */
-static int s526_detach(struct comedi_device * dev)
+static int s526_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: s526: remove\n", dev->minor);
 
@@ -478,47 +478,47 @@ static int s526_detach(struct comedi_device * dev)
 	return 0;
 }
 
-static int s526_gpct_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int s526_gpct_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	int i;			// counts the Data
+	int i;			/*  counts the Data */
 	int counter_channel = CR_CHAN(insn->chanspec);
 	unsigned short datalow;
 	unsigned short datahigh;
 
-	// Check if (n > 0)
+	/*  Check if (n > 0) */
 	if (insn->n <= 0) {
 		printk("s526: INSN_READ: n should be > 0\n");
 		return -EINVAL;
 	}
-	// Read the low word first
+	/*  Read the low word first */
 	for (i = 0; i < insn->n; i++) {
 		datalow = inw(ADDR_CHAN_REG(REG_C0L, counter_channel));
 		datahigh = inw(ADDR_CHAN_REG(REG_C0H, counter_channel));
 		data[i] = (int)(datahigh & 0x00FF);
 		data[i] = (data[i] << 16) | (datalow & 0xFFFF);
-//              printk("s526 GPCT[%d]: %x(0x%04x, 0x%04x)\n", counter_channel, data[i], datahigh, datalow);
+/* printk("s526 GPCT[%d]: %x(0x%04x, 0x%04x)\n", counter_channel, data[i], datahigh, datalow); */
 	}
 	return i;
 }
 
-static int s526_gpct_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int s526_gpct_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	int subdev_channel = CR_CHAN(insn->chanspec);	// Unpack chanspec
+	int subdev_channel = CR_CHAN(insn->chanspec);	/*  Unpack chanspec */
 	int i;
 	short value;
 
-//        printk("s526: GPCT_INSN_CONFIG: Configuring Channel %d\n", subdev_channel);
+/* printk("s526: GPCT_INSN_CONFIG: Configuring Channel %d\n", subdev_channel); */
 
 	for (i = 0; i < MAX_GPCT_CONFIG_DATA; i++) {
 		devpriv->s526_gpct_config[subdev_channel].data[i] =
 			insn->data[i];
-//              printk("data[%d]=%x\n", i, insn->data[i]);
+/* printk("data[%d]=%x\n", i, insn->data[i]); */
 	}
 
-	// Check what type of Counter the user requested, data[0] contains
-	// the Application type
+	/*  Check what type of Counter the user requested, data[0] contains */
+	/*  the Application type */
 	switch (insn->data[0]) {
 	case INSN_CONFIG_GPCT_QUADRATURE_ENCODER:
 		/*
@@ -531,19 +531,19 @@ static int s526_gpct_insn_config(struct comedi_device * dev, struct comedi_subde
 		devpriv->s526_gpct_config[subdev_channel].app =
 			PositionMeasurement;
 
-/*
-			// Example of Counter Application
-			//One-shot (software trigger)
-			cmReg.reg.coutSource		= 0; // out RCAP
-			cmReg.reg.coutPolarity		= 1; // Polarity inverted
-			cmReg.reg.autoLoadResetRcap	= 0; // Auto load disabled
-			cmReg.reg.hwCtEnableSource	= 3; // NOT RCAP
-			cmReg.reg.ctEnableCtrl		= 2; // Hardware
-			cmReg.reg.clockSource		= 2; // Internal
-			cmReg.reg.countDir		= 1; // Down
-			cmReg.reg.countDirCtrl		= 1; // Software
-			cmReg.reg.outputRegLatchCtrl	= 0; // latch on read
-			cmReg.reg.preloadRegSel		= 0; // PR0
+#if 0
+			/*  Example of Counter Application */
+			/* One-shot (software trigger) */
+			cmReg.reg.coutSource		= 0; /*  out RCAP */
+			cmReg.reg.coutPolarity		= 1; /*  Polarity inverted */
+			cmReg.reg.autoLoadResetRcap	= 0; /*  Auto load disabled */
+			cmReg.reg.hwCtEnableSource	= 3; /*  NOT RCAP */
+			cmReg.reg.ctEnableCtrl		= 2; /*  Hardware */
+			cmReg.reg.clockSource		= 2; /*  Internal */
+			cmReg.reg.countDir		= 1; /*  Down */
+			cmReg.reg.countDirCtrl		= 1; /*  Software */
+			cmReg.reg.outputRegLatchCtrl	= 0; /*  latch on read */
+			cmReg.reg.preloadRegSel		= 0; /*  PR0 */
 			cmReg.reg.reserved		= 0;
 
 			outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
@@ -551,40 +551,40 @@ static int s526_gpct_insn_config(struct comedi_device * dev, struct comedi_subde
 			outw(0x0001, ADDR_CHAN_REG(REG_C0H, subdev_channel));
 			outw(0x3C68, ADDR_CHAN_REG(REG_C0L, subdev_channel));
 
-			outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel));	// Reset the counter
-			outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel));	// Load the counter from PR0
+			outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel));	/*  Reset the counter */
+			outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel));	/*  Load the counter from PR0 */
 
-			outw(0x0008, ADDR_CHAN_REG(REG_C0C, subdev_channel));  // Reset RCAP (fires one-shot)
+			outw(0x0008, ADDR_CHAN_REG(REG_C0C, subdev_channel));  /*  Reset RCAP (fires one-shot) */
 
-*/
+#endif
 
 #if 1
-		// Set Counter Mode Register
-		cmReg.reg.coutSource = 0;	// out RCAP
-		cmReg.reg.coutPolarity = 0;	// Polarity inverted
-		cmReg.reg.autoLoadResetRcap = 0;	// Auto load disabled
-		cmReg.reg.hwCtEnableSource = 2;	// NOT RCAP
-		cmReg.reg.ctEnableCtrl = 1;	// 1: Software,  >1 : Hardware
-		cmReg.reg.clockSource = 3;	// x4
-		cmReg.reg.countDir = 0;	// up
-		cmReg.reg.countDirCtrl = 0;	// quadrature
-		cmReg.reg.outputRegLatchCtrl = 0;	// latch on read
-		cmReg.reg.preloadRegSel = 0;	// PR0
+		/*  Set Counter Mode Register */
+		cmReg.reg.coutSource = 0;	/*  out RCAP */
+		cmReg.reg.coutPolarity = 0;	/*  Polarity inverted */
+		cmReg.reg.autoLoadResetRcap = 0;	/*  Auto load disabled */
+		cmReg.reg.hwCtEnableSource = 2;	/*  NOT RCAP */
+		cmReg.reg.ctEnableCtrl = 1;	/*  1: Software,  >1 : Hardware */
+		cmReg.reg.clockSource = 3;	/*  x4 */
+		cmReg.reg.countDir = 0;	/*  up */
+		cmReg.reg.countDirCtrl = 0;	/*  quadrature */
+		cmReg.reg.outputRegLatchCtrl = 0;	/*  latch on read */
+		cmReg.reg.preloadRegSel = 0;	/*  PR0 */
 		cmReg.reg.reserved = 0;
 
-		// Set Counter Mode Register
-//                      printk("s526: Counter Mode register=%x\n", cmReg.value);
+		/*  Set Counter Mode Register */
+/* printk("s526: Counter Mode register=%x\n", cmReg.value); */
 		outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
 
-		// Reset the counter if it is software preload
+		/*  Reset the counter if it is software preload */
 		if (cmReg.reg.autoLoadResetRcap == 0) {
-			outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel));	// Reset the counter
-//                              outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel));   // Load the counter from PR0
+			outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel));	/*  Reset the counter */
+/* outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel));    Load the counter from PR0 */
 		}
 #else
-		cmReg.reg.countDirCtrl = 0;	// 0 quadrature, 1 software control
+		cmReg.reg.countDirCtrl = 0;	/*  0 quadrature, 1 software control */
 
-		// data[1] contains GPCT_X1, GPCT_X2 or GPCT_X4
+		/*  data[1] contains GPCT_X1, GPCT_X2 or GPCT_X4 */
 		if (insn->data[1] == GPCT_X2) {
 			cmReg.reg.clockSource = 1;
 		} else if (insn->data[1] == GPCT_X4) {
@@ -593,37 +593,37 @@ static int s526_gpct_insn_config(struct comedi_device * dev, struct comedi_subde
 			cmReg.reg.clockSource = 0;
 		}
 
-		// When to take into account the indexpulse:
+		/*  When to take into account the indexpulse: */
 		if (insn->data[2] == GPCT_IndexPhaseLowLow) {
 		} else if (insn->data[2] == GPCT_IndexPhaseLowHigh) {
 		} else if (insn->data[2] == GPCT_IndexPhaseHighLow) {
 		} else if (insn->data[2] == GPCT_IndexPhaseHighHigh) {
 		}
-		// Take into account the index pulse?
+		/*  Take into account the index pulse? */
 		if (insn->data[3] == GPCT_RESET_COUNTER_ON_INDEX)
-			cmReg.reg.autoLoadResetRcap = 4;	// Auto load with INDEX^
+			cmReg.reg.autoLoadResetRcap = 4;	/*  Auto load with INDEX^ */
 
-		// Set Counter Mode Register
+		/*  Set Counter Mode Register */
 		cmReg.value = (short) (insn->data[1] & 0xFFFF);
 		outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
 
-		// Load the pre-laod register high word
+		/*  Load the pre-laod register high word */
 		value = (short) ((insn->data[2] >> 16) & 0xFFFF);
 		outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel));
 
-		// Load the pre-laod register low word
+		/*  Load the pre-laod register low word */
 		value = (short) (insn->data[2] & 0xFFFF);
 		outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel));
 
-		// Write the Counter Control Register
+		/*  Write the Counter Control Register */
 		if (insn->data[3] != 0) {
 			value = (short) (insn->data[3] & 0xFFFF);
 			outw(value, ADDR_CHAN_REG(REG_C0C, subdev_channel));
 		}
-		// Reset the counter if it is software preload
+		/*  Reset the counter if it is software preload */
 		if (cmReg.reg.autoLoadResetRcap == 0) {
-			outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel));	// Reset the counter
-			outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel));	// Load the counter from PR0
+			outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel));	/*  Reset the counter */
+			outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel));	/*  Load the counter from PR0 */
 		}
 #endif
 		break;
@@ -640,33 +640,33 @@ static int s526_gpct_insn_config(struct comedi_device * dev, struct comedi_subde
 		devpriv->s526_gpct_config[subdev_channel].app =
 			SinglePulseGeneration;
 
-		// Set Counter Mode Register
+		/*  Set Counter Mode Register */
 		cmReg.value = (short) (insn->data[1] & 0xFFFF);
-		cmReg.reg.preloadRegSel = 0;	// PR0
+		cmReg.reg.preloadRegSel = 0;	/*  PR0 */
 		outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
 
-		// Load the pre-laod register 0 high word
+		/*  Load the pre-laod register 0 high word */
 		value = (short) ((insn->data[2] >> 16) & 0xFFFF);
 		outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel));
 
-		// Load the pre-laod register 0 low word
+		/*  Load the pre-laod register 0 low word */
 		value = (short) (insn->data[2] & 0xFFFF);
 		outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel));
 
-		// Set Counter Mode Register
+		/*  Set Counter Mode Register */
 		cmReg.value = (short) (insn->data[1] & 0xFFFF);
-		cmReg.reg.preloadRegSel = 1;	// PR1
+		cmReg.reg.preloadRegSel = 1;	/*  PR1 */
 		outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
 
-		// Load the pre-laod register 1 high word
+		/*  Load the pre-laod register 1 high word */
 		value = (short) ((insn->data[3] >> 16) & 0xFFFF);
 		outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel));
 
-		// Load the pre-laod register 1 low word
+		/*  Load the pre-laod register 1 low word */
 		value = (short) (insn->data[3] & 0xFFFF);
 		outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel));
 
-		// Write the Counter Control Register
+		/*  Write the Counter Control Register */
 		if (insn->data[3] != 0) {
 			value = (short) (insn->data[3] & 0xFFFF);
 			outw(value, ADDR_CHAN_REG(REG_C0C, subdev_channel));
@@ -685,33 +685,33 @@ static int s526_gpct_insn_config(struct comedi_device * dev, struct comedi_subde
 		devpriv->s526_gpct_config[subdev_channel].app =
 			PulseTrainGeneration;
 
-		// Set Counter Mode Register
+		/*  Set Counter Mode Register */
 		cmReg.value = (short) (insn->data[1] & 0xFFFF);
-		cmReg.reg.preloadRegSel = 0;	// PR0
+		cmReg.reg.preloadRegSel = 0;	/*  PR0 */
 		outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
 
-		// Load the pre-laod register 0 high word
+		/*  Load the pre-laod register 0 high word */
 		value = (short) ((insn->data[2] >> 16) & 0xFFFF);
 		outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel));
 
-		// Load the pre-laod register 0 low word
+		/*  Load the pre-laod register 0 low word */
 		value = (short) (insn->data[2] & 0xFFFF);
 		outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel));
 
-		// Set Counter Mode Register
+		/*  Set Counter Mode Register */
 		cmReg.value = (short) (insn->data[1] & 0xFFFF);
-		cmReg.reg.preloadRegSel = 1;	// PR1
+		cmReg.reg.preloadRegSel = 1;	/*  PR1 */
 		outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
 
-		// Load the pre-laod register 1 high word
+		/*  Load the pre-laod register 1 high word */
 		value = (short) ((insn->data[3] >> 16) & 0xFFFF);
 		outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel));
 
-		// Load the pre-laod register 1 low word
+		/*  Load the pre-laod register 1 low word */
 		value = (short) (insn->data[3] & 0xFFFF);
 		outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel));
 
-		// Write the Counter Control Register
+		/*  Write the Counter Control Register */
 		if (insn->data[3] != 0) {
 			value = (short) (insn->data[3] & 0xFFFF);
 			outw(value, ADDR_CHAN_REG(REG_C0C, subdev_channel));
@@ -727,16 +727,16 @@ static int s526_gpct_insn_config(struct comedi_device * dev, struct comedi_subde
 	return insn->n;
 }
 
-static int s526_gpct_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int s526_gpct_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
-	int subdev_channel = CR_CHAN(insn->chanspec);	// Unpack chanspec
+	int subdev_channel = CR_CHAN(insn->chanspec);	/*  Unpack chanspec */
 	short value;
 
 	printk("s526: GPCT_INSN_WRITE on channel %d\n", subdev_channel);
 	cmReg.value = inw(ADDR_CHAN_REG(REG_C0M, subdev_channel));
 	printk("s526: Counter Mode Register: %x\n", cmReg.value);
-	// Check what Application of Counter this channel is configured for
+	/*  Check what Application of Counter this channel is configured for */
 	switch (devpriv->s526_gpct_config[subdev_channel].app) {
 	case PositionMeasurement:
 		printk("S526: INSN_WRITE: PM\n");
@@ -776,18 +776,18 @@ static int s526_gpct_winsn(struct comedi_device * dev, struct comedi_subdevice *
 		value = (short) (*data & 0xFFFF);
 		outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel));
 		break;
-	default:		// Impossible
+	default:		/*  Impossible */
 		printk("s526: INSN_WRITE: Functionality %d not implemented yet\n", devpriv->s526_gpct_config[subdev_channel].app);
 		return -EINVAL;
 		break;
 	}
-	// return the number of samples written
+	/*  return the number of samples written */
 	return insn->n;
 }
 
 #define ISR_ADC_DONE 0x4
-static int s526_ai_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int s526_ai_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int result = -EINVAL;
 
@@ -803,14 +803,14 @@ static int s526_ai_insn_config(struct comedi_device * dev, struct comedi_subdevi
 	 * enable channels here.  The channel should be enabled in the
 	 * INSN_READ handler. */
 
-	// Enable ADC interrupt
+	/*  Enable ADC interrupt */
 	outw(ISR_ADC_DONE, ADDR_REG(REG_IER));
-//      printk("s526: ADC current value: 0x%04x\n", inw(ADDR_REG(REG_ADC)));
+/* printk("s526: ADC current value: 0x%04x\n", inw(ADDR_REG(REG_ADC))); */
 	devpriv->s526_ai_config = (data[0] & 0x3FF) << 5;
 	if (data[1] > 0)
-		devpriv->s526_ai_config |= 0x8000;	//set the delay
+		devpriv->s526_ai_config |= 0x8000;	/* set the delay */
 
-	devpriv->s526_ai_config |= 0x0001;	// ADC start bit.
+	devpriv->s526_ai_config |= 0x0001;	/*  ADC start bit. */
 
 	return result;
 }
@@ -819,8 +819,8 @@ static int s526_ai_insn_config(struct comedi_device * dev, struct comedi_subdevi
  * "instructions" read/write data in "one-shot" or "software-triggered"
  * mode.
  */
-static int s526_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int s526_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n, i;
 	int chan = CR_CHAN(insn->chanspec);
@@ -837,8 +837,8 @@ static int s526_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s
 	for (n = 0; n < insn->n; n++) {
 		/* trigger conversion */
 		outw(value, ADDR_REG(REG_ADC));
-//              printk("s526: Wrote 0x%04x to ADC\n", value);
-//              printk("s526: ADC reg=0x%04x\n", inw(ADDR_REG(REG_ADC)));
+/* printk("s526: Wrote 0x%04x to ADC\n", value); */
+/* printk("s526: ADC reg=0x%04x\n", inw(ADDR_REG(REG_ADC))); */
 
 #define TIMEOUT 100
 		/* wait for conversion to end */
@@ -850,16 +850,16 @@ static int s526_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s
 			}
 		}
 		if (i == TIMEOUT) {
-			/* rt_printk() should be used instead of printk()
+			/* printk() should be used instead of printk()
 			 * whenever the code can be called from real-time. */
-			rt_printk("s526: ADC(0x%04x) timeout\n",
+			printk("s526: ADC(0x%04x) timeout\n",
 				inw(ADDR_REG(REG_ISR)));
 			return -ETIMEDOUT;
 		}
 
 		/* read data */
 		d = inw(ADDR_REG(REG_ADD));
-//              printk("AI[%d]=0x%04x\n", n, (unsigned short)(d & 0xFFFF));
+/* printk("AI[%d]=0x%04x\n", n, (unsigned short)(d & 0xFFFF)); */
 
 		/* munge data */
 		data[n] = d ^ 0x8000;
@@ -869,27 +869,27 @@ static int s526_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s
 	return n;
 }
 
-static int s526_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int s526_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
 	unsigned short val;
 
-//      printk("s526_ao_winsn\n");
+/* printk("s526_ao_winsn\n"); */
 	val = chan << 1;
-//      outw(val, dev->iobase + REG_DAC);
+/* outw(val, dev->iobase + REG_DAC); */
 	outw(val, ADDR_REG(REG_DAC));
 
 	/* Writing a list of values to an AO channel is probably not
 	 * very useful, but that's how the interface is defined. */
 	for (i = 0; i < insn->n; i++) {
 		/* a typical programming sequence */
-//              outw(data[i], dev->iobase + REG_ADD);  // write the data to preload register
-		outw(data[i], ADDR_REG(REG_ADD));	// write the data to preload register
+/* outw(data[i], dev->iobase + REG_ADD);    write the data to preload register */
+		outw(data[i], ADDR_REG(REG_ADD));	/*  write the data to preload register */
 		devpriv->ao_readback[chan] = data[i];
-//              outw(val + 1, dev->iobase + REG_DAC); // starts the D/A conversion.
-		outw(val + 1, ADDR_REG(REG_DAC));	// starts the D/A conversion.
+/* outw(val + 1, dev->iobase + REG_DAC);  starts the D/A conversion. */
+		outw(val + 1, ADDR_REG(REG_DAC));	/*  starts the D/A conversion. */
 	}
 
 	/* return the number of samples read/written */
@@ -898,8 +898,8 @@ static int s526_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s
 
 /* AO subdevices should have a read insn as well as a write insn.
  * Usually this means copying a value stored in devpriv. */
-static int s526_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int s526_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
@@ -915,8 +915,8 @@ static int s526_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s
  * useful to applications if you implement the insn_bits interface.
  * This allows packed reading/writing of the DIO channels.  The
  * comedi core can convert between insn_bits and insn_read/write */
-static int s526_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int s526_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -932,16 +932,16 @@ static int s526_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevic
 
 	/* on return, data[1] contains the value of the digital
 	 * input and output lines. */
-	data[1] = inw(ADDR_REG(REG_DIO)) & 0xFF;	// low 8 bits are the data
+	data[1] = inw(ADDR_REG(REG_DIO)) & 0xFF;	/*  low 8 bits are the data */
 	/* or we could just return the software copy of the output values if
 	 * it was a purely digital output subdevice */
-	//data[1]=s->state;
+	/* data[1]=s->state; */
 
 	return 2;
 }
 
-static int s526_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int s526_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int chan = CR_CHAN(insn->chanspec);
 	short value;
@@ -959,10 +959,10 @@ static int s526_dio_insn_config(struct comedi_device * dev, struct comedi_subdev
 	 * value COMEDI_INPUT or COMEDI_OUTPUT. */
 
 	if (data[0] == COMEDI_OUTPUT) {
-		value |= 1 << (chan + 10);	// bit 10/11 set the group 1/2's mode
+		value |= 1 << (chan + 10);	/*  bit 10/11 set the group 1/2's mode */
 		s->io_bits |= (0xF << chan);
 	} else {
-		value &= ~(1 << (chan + 10));	// 1 is output, 0 is input.
+		value &= ~(1 << (chan + 10));	/*  1 is output, 0 is input. */
 		s->io_bits &= ~(0xF << chan);
 	}
 	outw(value, ADDR_REG(REG_DIO));
diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index 30dec9dab19..92121cf8c45 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -68,6 +68,7 @@ INSN_CONFIG instructions:
    comedi_do_insn(cf,&insn); //executing configuration
 */
 
+#include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 
@@ -95,14 +96,14 @@ struct s626_board {
 
 static const struct s626_board s626_boards[] = {
 	{
-	      name:	"s626",
-	      ai_chans : S626_ADC_CHANNELS,
-	      ai_bits:	14,
-	      ao_chans : S626_DAC_CHANNELS,
-	      ao_bits:	13,
-	      dio_chans : S626_DIO_CHANNELS,
-	      dio_banks : S626_DIO_BANKS,
-	      enc_chans : S626_ENCODER_CHANNELS,
+	.name = "s626",
+	.ai_chans = S626_ADC_CHANNELS,
+	.ai_bits = 14,
+	.ao_chans = S626_DAC_CHANNELS,
+	.ao_bits = 13,
+	.dio_chans = S626_DIO_CHANNELS,
+	.dio_banks = S626_DIO_BANKS,
+	.enc_chans = S626_ENCODER_CHANNELS,
 		}
 };
 
@@ -122,10 +123,10 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it);
 static int s626_detach(struct comedi_device *dev);
 
 static struct comedi_driver driver_s626 = {
-      driver_name:"s626",
-      module : THIS_MODULE,
-      attach : s626_attach,
-      detach : s626_detach,
+	.driver_name = "s626",
+	.module = THIS_MODULE,
+	.attach = s626_attach,
+	.detach = s626_detach,
 };
 
 struct s626_private {
@@ -173,39 +174,39 @@ struct dio_private {
 };
 
 static struct dio_private dio_private_A = {
-      RDDIn:LP_RDDINA,
-      WRDOut : LP_WRDOUTA,
-      RDEdgSel : LP_RDEDGSELA,
-      WREdgSel : LP_WREDGSELA,
-      RDCapSel : LP_RDCAPSELA,
-      WRCapSel : LP_WRCAPSELA,
-      RDCapFlg : LP_RDCAPFLGA,
-      RDIntSel : LP_RDINTSELA,
-      WRIntSel : LP_WRINTSELA,
+	.RDDIn = LP_RDDINA,
+	.WRDOut = LP_WRDOUTA,
+	.RDEdgSel = LP_RDEDGSELA,
+	.WREdgSel = LP_WREDGSELA,
+	.RDCapSel = LP_RDCAPSELA,
+	.WRCapSel = LP_WRCAPSELA,
+	.RDCapFlg = LP_RDCAPFLGA,
+	.RDIntSel = LP_RDINTSELA,
+	.WRIntSel = LP_WRINTSELA,
 };
 
 static struct dio_private dio_private_B = {
-      RDDIn:LP_RDDINB,
-      WRDOut : LP_WRDOUTB,
-      RDEdgSel : LP_RDEDGSELB,
-      WREdgSel : LP_WREDGSELB,
-      RDCapSel : LP_RDCAPSELB,
-      WRCapSel : LP_WRCAPSELB,
-      RDCapFlg : LP_RDCAPFLGB,
-      RDIntSel : LP_RDINTSELB,
-      WRIntSel : LP_WRINTSELB,
+	.RDDIn = LP_RDDINB,
+	.WRDOut = LP_WRDOUTB,
+	.RDEdgSel = LP_RDEDGSELB,
+	.WREdgSel = LP_WREDGSELB,
+	.RDCapSel = LP_RDCAPSELB,
+	.WRCapSel = LP_WRCAPSELB,
+	.RDCapFlg = LP_RDCAPFLGB,
+	.RDIntSel = LP_RDINTSELB,
+	.WRIntSel = LP_WRINTSELB,
 };
 
 static struct dio_private dio_private_C = {
-      RDDIn:LP_RDDINC,
-      WRDOut : LP_WRDOUTC,
-      RDEdgSel : LP_RDEDGSELC,
-      WREdgSel : LP_WREDGSELC,
-      RDCapSel : LP_RDCAPSELC,
-      WRCapSel : LP_WRCAPSELC,
-      RDCapFlg : LP_RDCAPFLGC,
-      RDIntSel : LP_RDINTSELC,
-      WRIntSel : LP_WRINTSELC,
+	.RDDIn = LP_RDDINC,
+	.WRDOut = LP_WRDOUTC,
+	.RDEdgSel = LP_RDEDGSELC,
+	.WREdgSel = LP_WREDGSELC,
+	.RDCapSel = LP_RDCAPSELC,
+	.WRCapSel = LP_WRCAPSELC,
+	.RDCapFlg = LP_RDCAPFLGC,
+	.RDIntSel = LP_RDINTSELC,
+	.WRIntSel = LP_WRINTSELC,
 };
 
 /* to group dio devices (48 bits mask and data are not allowed ???)
@@ -253,7 +254,7 @@ static int s626_ns_to_timer(int *nanosec, int round_mode);
 static int s626_ai_load_polllist(uint8_t *ppl, struct comedi_cmd *cmd);
 static int s626_ai_inttrig(struct comedi_device *dev, struct comedi_subdevice *s,
 	unsigned int trignum);
-static irqreturn_t s626_irq_handler(int irq, void *d PT_REGS_ARG);
+static irqreturn_t s626_irq_handler(int irq, void *d);
 static unsigned int s626_ai_reg_to_uint(int data);
 /* static unsigned int s626_uint_to_reg(struct comedi_subdevice *s, int data); */
 
@@ -355,100 +356,100 @@ static void CountersInit(struct comedi_device *dev);
 /* struct enc_private; */
 static struct enc_private enc_private_data[] = {
 	{
-	      GetEnable:GetEnable_A,
-	      GetIntSrc : GetIntSrc_A,
-	      GetLoadTrig : GetLoadTrig_A,
-	      GetMode :	GetMode_A,
-	      PulseIndex : PulseIndex_A,
-	      SetEnable : SetEnable_A,
-	      SetIntSrc : SetIntSrc_A,
-	      SetLoadTrig : SetLoadTrig_A,
-	      SetMode :	SetMode_A,
-	      ResetCapFlags : ResetCapFlags_A,
-	      MyCRA :	LP_CR0A,
-	      MyCRB :	LP_CR0B,
-	      MyLatchLsw : LP_CNTR0ALSW,
-	      MyEventBits : EVBITS(0),
+	.GetEnable = GetEnable_A,
+	.GetIntSrc = GetIntSrc_A,
+	.GetLoadTrig = GetLoadTrig_A,
+	.GetMode = GetMode_A,
+	.PulseIndex = PulseIndex_A,
+	.SetEnable = SetEnable_A,
+	.SetIntSrc = SetIntSrc_A,
+	.SetLoadTrig = SetLoadTrig_A,
+	.SetMode = SetMode_A,
+	.ResetCapFlags = ResetCapFlags_A,
+	.MyCRA = LP_CR0A,
+	.MyCRB = LP_CR0B,
+	.MyLatchLsw = LP_CNTR0ALSW,
+	.MyEventBits = EVBITS(0),
 		},
 	{
-	      GetEnable:GetEnable_A,
-	      GetIntSrc : GetIntSrc_A,
-	      GetLoadTrig : GetLoadTrig_A,
-	      GetMode :	GetMode_A,
-	      PulseIndex : PulseIndex_A,
-	      SetEnable : SetEnable_A,
-	      SetIntSrc : SetIntSrc_A,
-	      SetLoadTrig : SetLoadTrig_A,
-	      SetMode :	SetMode_A,
-	      ResetCapFlags : ResetCapFlags_A,
-	      MyCRA :	LP_CR1A,
-	      MyCRB :	LP_CR1B,
-	      MyLatchLsw : LP_CNTR1ALSW,
-	      MyEventBits : EVBITS(1),
+	.GetEnable = GetEnable_A,
+	.GetIntSrc = GetIntSrc_A,
+	.GetLoadTrig = GetLoadTrig_A,
+	.GetMode = GetMode_A,
+	.PulseIndex = PulseIndex_A,
+	.SetEnable = SetEnable_A,
+	.SetIntSrc = SetIntSrc_A,
+	.SetLoadTrig = SetLoadTrig_A,
+	.SetMode = SetMode_A,
+	.ResetCapFlags = ResetCapFlags_A,
+	.MyCRA = LP_CR1A,
+	.MyCRB = LP_CR1B,
+	.MyLatchLsw = LP_CNTR1ALSW,
+	.MyEventBits = EVBITS(1),
 		},
 	{
-	      GetEnable:GetEnable_A,
-	      GetIntSrc : GetIntSrc_A,
-	      GetLoadTrig : GetLoadTrig_A,
-	      GetMode :	GetMode_A,
-	      PulseIndex : PulseIndex_A,
-	      SetEnable : SetEnable_A,
-	      SetIntSrc : SetIntSrc_A,
-	      SetLoadTrig : SetLoadTrig_A,
-	      SetMode :	SetMode_A,
-	      ResetCapFlags : ResetCapFlags_A,
-	      MyCRA :	LP_CR2A,
-	      MyCRB :	LP_CR2B,
-	      MyLatchLsw : LP_CNTR2ALSW,
-	      MyEventBits : EVBITS(2),
+	.GetEnable = GetEnable_A,
+	.GetIntSrc = GetIntSrc_A,
+	.GetLoadTrig = GetLoadTrig_A,
+	.GetMode = GetMode_A,
+	.PulseIndex = PulseIndex_A,
+	.SetEnable = SetEnable_A,
+	.SetIntSrc = SetIntSrc_A,
+	.SetLoadTrig = SetLoadTrig_A,
+	.SetMode = SetMode_A,
+	.ResetCapFlags = ResetCapFlags_A,
+	.MyCRA = LP_CR2A,
+	.MyCRB = LP_CR2B,
+	.MyLatchLsw = LP_CNTR2ALSW,
+	.MyEventBits = EVBITS(2),
 		},
 	{
-	      GetEnable:GetEnable_B,
-	      GetIntSrc : GetIntSrc_B,
-	      GetLoadTrig : GetLoadTrig_B,
-	      GetMode :	GetMode_B,
-	      PulseIndex : PulseIndex_B,
-	      SetEnable : SetEnable_B,
-	      SetIntSrc : SetIntSrc_B,
-	      SetLoadTrig : SetLoadTrig_B,
-	      SetMode :	SetMode_B,
-	      ResetCapFlags : ResetCapFlags_B,
-	      MyCRA :	LP_CR0A,
-	      MyCRB :	LP_CR0B,
-	      MyLatchLsw : LP_CNTR0BLSW,
-	      MyEventBits : EVBITS(3),
+	.GetEnable = GetEnable_B,
+	.GetIntSrc = GetIntSrc_B,
+	.GetLoadTrig = GetLoadTrig_B,
+	.GetMode = GetMode_B,
+	.PulseIndex = PulseIndex_B,
+	.SetEnable = SetEnable_B,
+	.SetIntSrc = SetIntSrc_B,
+	.SetLoadTrig = SetLoadTrig_B,
+	.SetMode = SetMode_B,
+	.ResetCapFlags = ResetCapFlags_B,
+	.MyCRA = LP_CR0A,
+	.MyCRB = LP_CR0B,
+	.MyLatchLsw = LP_CNTR0BLSW,
+	.MyEventBits = EVBITS(3),
 		},
 	{
-	      GetEnable:GetEnable_B,
-	      GetIntSrc : GetIntSrc_B,
-	      GetLoadTrig : GetLoadTrig_B,
-	      GetMode :	GetMode_B,
-	      PulseIndex : PulseIndex_B,
-	      SetEnable : SetEnable_B,
-	      SetIntSrc : SetIntSrc_B,
-	      SetLoadTrig : SetLoadTrig_B,
-	      SetMode :	SetMode_B,
-	      ResetCapFlags : ResetCapFlags_B,
-	      MyCRA :	LP_CR1A,
-	      MyCRB :	LP_CR1B,
-	      MyLatchLsw : LP_CNTR1BLSW,
-	      MyEventBits : EVBITS(4),
+	.GetEnable = GetEnable_B,
+	.GetIntSrc = GetIntSrc_B,
+	.GetLoadTrig = GetLoadTrig_B,
+	.GetMode = GetMode_B,
+	.PulseIndex = PulseIndex_B,
+	.SetEnable = SetEnable_B,
+	.SetIntSrc = SetIntSrc_B,
+	.SetLoadTrig = SetLoadTrig_B,
+	.SetMode = SetMode_B,
+	.ResetCapFlags = ResetCapFlags_B,
+	.MyCRA = LP_CR1A,
+	.MyCRB = LP_CR1B,
+	.MyLatchLsw = LP_CNTR1BLSW,
+	.MyEventBits = EVBITS(4),
 		},
 	{
-	      GetEnable:GetEnable_B,
-	      GetIntSrc : GetIntSrc_B,
-	      GetLoadTrig : GetLoadTrig_B,
-	      GetMode :	GetMode_B,
-	      PulseIndex : PulseIndex_B,
-	      SetEnable : SetEnable_B,
-	      SetIntSrc : SetIntSrc_B,
-	      SetLoadTrig : SetLoadTrig_B,
-	      SetMode :	SetMode_B,
-	      ResetCapFlags : ResetCapFlags_B,
-	      MyCRA :	LP_CR2A,
-	      MyCRB :	LP_CR2B,
-	      MyLatchLsw : LP_CNTR2BLSW,
-	      MyEventBits : EVBITS(5),
+	.GetEnable = GetEnable_B,
+	.GetIntSrc = GetIntSrc_B,
+	.GetLoadTrig = GetLoadTrig_B,
+	.GetMode = GetMode_B,
+	.PulseIndex = PulseIndex_B,
+	.SetEnable = SetEnable_B,
+	.SetIntSrc = SetIntSrc_B,
+	.SetLoadTrig = SetLoadTrig_B,
+	.SetMode = SetMode_B,
+	.ResetCapFlags = ResetCapFlags_B,
+	.MyCRA = LP_CR2A,
+	.MyCRB = LP_CR2B,
+	.MyLatchLsw = LP_CNTR2BLSW,
+	.MyEventBits = EVBITS(5),
 		},
 };
 
@@ -596,8 +597,8 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	if (dev->irq == 0) {
 		printk(" unknown irq (bad)\n");
 	} else {
-		ret = comedi_request_irq(dev->irq, s626_irq_handler,
-					 IRQF_SHARED, "s626", dev);
+		ret = request_irq(dev->irq, s626_irq_handler, IRQF_SHARED,
+				  "s626", dev);
 
 		if (ret < 0) {
 			printk(" irq not available\n");
@@ -968,7 +969,7 @@ static unsigned int s626_ai_reg_to_uint(int data)
 /*   return 0; */
 /* } */
 
-static irqreturn_t s626_irq_handler(int irq, void *d PT_REGS_ARG)
+static irqreturn_t s626_irq_handler(int irq, void *d)
 {
 	struct comedi_device *dev = d;
 	struct comedi_subdevice *s;
@@ -987,7 +988,7 @@ static irqreturn_t s626_irq_handler(int irq, void *d PT_REGS_ARG)
 	if (dev->attached == 0)
 		return IRQ_NONE;
 	/*  lock to avoid race with comedi_poll */
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
+	spin_lock_irqsave(&dev->spinlock, flags);
 
 	/* save interrupt enable register state */
 	irqstatus = readl(devpriv->base_addr + P_IER);
@@ -1264,7 +1265,7 @@ static irqreturn_t s626_irq_handler(int irq, void *d PT_REGS_ARG)
 
 	DEBUG("s626_irq_handler: exit interrupt service routine.\n");
 
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 	return IRQ_HANDLED;
 }
 
@@ -1291,7 +1292,7 @@ static int s626_detach(struct comedi_device *dev)
 		}
 
 		if (dev->irq)
-			comedi_free_irq(dev->irq, dev);
+			free_irq(dev->irq, dev);
 
 		if (devpriv->base_addr)
 			iounmap(devpriv->base_addr);
@@ -1574,7 +1575,7 @@ static int s626_ai_insn_read(struct comedi_device *dev, struct comedi_subdevice
 	for (n = 0; n < insn->n; n++) {
 
 		/*  Delay 10 microseconds for analog input settling. */
-		comedi_udelay(10);
+		udelay(10);
 
 		/*  Start ADC by pulsing GPIO1 low. */
 		GpioImage = RR7146(P_GPIO);
@@ -1606,7 +1607,7 @@ static int s626_ai_insn_read(struct comedi_device *dev, struct comedi_subdevice
 		 * data value is sometimes set to the previous
 		 * conversion's data value.
 		 */
-		comedi_udelay(4);
+		udelay(4);
 	}
 
 	/* Start a dummy conversion to cause the data from the
@@ -1886,31 +1887,16 @@ static int s626_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s
 		err++;
 	}
 
-	if (cmd->start_src == TRIG_EXT && cmd->start_arg < 0) {
-		cmd->start_arg = 0;
-		err++;
-	}
-
 	if (cmd->start_src == TRIG_EXT && cmd->start_arg > 39) {
 		cmd->start_arg = 39;
 		err++;
 	}
 
-	if (cmd->scan_begin_src == TRIG_EXT && cmd->scan_begin_arg < 0) {
-		cmd->scan_begin_arg = 0;
-		err++;
-	}
-
 	if (cmd->scan_begin_src == TRIG_EXT && cmd->scan_begin_arg > 39) {
 		cmd->scan_begin_arg = 39;
 		err++;
 	}
 
-	if (cmd->convert_src == TRIG_EXT && cmd->convert_arg < 0) {
-		cmd->convert_arg = 0;
-		err++;
-	}
-
 	if (cmd->convert_src == TRIG_EXT && cmd->convert_arg > 39) {
 		cmd->convert_arg = 39;
 		err++;
@@ -2373,7 +2359,7 @@ static void LoadTrimDACs(struct comedi_device *dev)
 	register uint8_t i;
 
 	/*  Copy TrimDac setpoint values from EEPROM to TrimDacs. */
-	for (i = 0; i < (sizeof(trimchan) / sizeof(trimchan[0])); i++)
+	for (i = 0; i < ARRAY_SIZE(trimchan); i++)
 		WriteTrimDAC(dev, i, I2Cread(dev, trimadrs[i]));
 }
 
diff --git a/drivers/staging/comedi/drivers/s626.h b/drivers/staging/comedi/drivers/s626.h
index 891126f2509..27ae02be530 100644
--- a/drivers/staging/comedi/drivers/s626.h
+++ b/drivers/staging/comedi/drivers/s626.h
@@ -63,7 +63,7 @@
 */
 
 #ifdef _DEBUG_
-#define DEBUG(...);        rt_printk(__VA_ARGS__);
+#define DEBUG(...);        printk(__VA_ARGS__);
 #else
 #define DEBUG(...)
 #endif
diff --git a/drivers/staging/comedi/drivers/serial2002.c b/drivers/staging/comedi/drivers/serial2002.c
index 844fd5e2e3a..db18b11b9d3 100644
--- a/drivers/staging/comedi/drivers/serial2002.c
+++ b/drivers/staging/comedi/drivers/serial2002.c
@@ -52,7 +52,7 @@ struct serial2002_board {
 
 static const struct serial2002_board serial2002_boards[] = {
 	{
-      name:	"serial2002"}
+	.name = "serial2002"}
 };
 
 /*
@@ -62,7 +62,7 @@ static const struct serial2002_board serial2002_boards[] = {
 
 struct serial2002_range_table_t {
 
-	// HACK...
+	/*  HACK... */
 	int length;
 	struct comedi_krange range;
 };
@@ -70,8 +70,8 @@ struct serial2002_range_table_t {
 
 struct serial2002_private {
 
-	int port;		// /dev/ttyS<port>
-	int speed;		// baudrate
+	int port;		/*  /dev/ttyS<port> */
+	int speed;		/*  baudrate */
 	struct file *tty;
 	unsigned int ao_readback[32];
 	unsigned char digital_in_mapping[32];
@@ -89,28 +89,28 @@ struct serial2002_private {
  */
 #define devpriv ((struct serial2002_private *)dev->private)
 
-static int serial2002_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int serial2002_detach(struct comedi_device * dev);
+static int serial2002_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int serial2002_detach(struct comedi_device *dev);
 struct comedi_driver driver_serial2002 = {
-      driver_name:"serial2002",
-      module:THIS_MODULE,
-      attach:serial2002_attach,
-      detach:serial2002_detach,
-      board_name:&serial2002_boards[0].name,
-      offset:sizeof(struct serial2002_board),
-      num_names:sizeof(serial2002_boards) / sizeof(struct serial2002_board),
+	.driver_name = "serial2002",
+	.module = THIS_MODULE,
+	.attach = serial2002_attach,
+	.detach = serial2002_detach,
+	.board_name = &serial2002_boards[0].name,
+	.offset = sizeof(struct serial2002_board),
+	.num_names = ARRAY_SIZE(serial2002_boards),
 };
 
-static int serial2002_di_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int serial2002_do_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int serial2002_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int serial2002_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int serial2002_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
+static int serial2002_di_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int serial2002_do_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int serial2002_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int serial2002_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int serial2002_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
 
 struct serial_data {
 	enum { is_invalid, is_digital, is_channel } kind;
@@ -121,12 +121,12 @@ struct serial_data {
 static long tty_ioctl(struct file *f, unsigned op, unsigned long param)
 {
 #ifdef HAVE_UNLOCKED_IOCTL
-  	if (f->f_op->unlocked_ioctl) {
+	if (f->f_op->unlocked_ioctl) {
 		return f->f_op->unlocked_ioctl(f, op, param);
 	}
 #endif
 	if (f->f_op->ioctl) {
-	  	return f->f_op->ioctl(f->f_dentry->d_inode, f, op, param);
+		return f->f_op->ioctl(f->f_dentry->d_inode, f, op, param);
 	}
 	return -ENOSYS;
 }
@@ -211,7 +211,7 @@ static int tty_read(struct file *f, int timeout)
 			/* Device does not support poll, busy wait */
 			int retries = 0;
 			while (1) {
-			  	unsigned char ch;
+				unsigned char ch;
 
 				retries++;
 				if (retries >= timeout) {
@@ -220,10 +220,10 @@ static int tty_read(struct file *f, int timeout)
 
 				f->f_pos = 0;
 				if (f->f_op->read(f, &ch, 1, &f->f_pos) == 1) {
-				  	result = ch;
+					result = ch;
 					break;
 				}
-				comedi_udelay(100);
+				udelay(100);
 			}
 		}
 		set_fs(oldfs);
@@ -238,11 +238,11 @@ static void tty_setspeed(struct file *f, int speed)
 	oldfs = get_fs();
 	set_fs(KERNEL_DS);
 	{
-		// Set speed
+		/*  Set speed */
 		struct termios settings;
 
 		tty_ioctl(f, TCGETS, (unsigned long)&settings);
-//    printk("Speed: %d\n", settings.c_cflag & (CBAUD | CBAUDEX));
+/* printk("Speed: %d\n", settings.c_cflag & (CBAUD | CBAUDEX)); */
 		settings.c_iflag = 0;
 		settings.c_oflag = 0;
 		settings.c_lflag = 0;
@@ -284,10 +284,10 @@ static void tty_setspeed(struct file *f, int speed)
 			break;
 		}
 		tty_ioctl(f, TCSETS, (unsigned long)&settings);
-//    printk("Speed: %d\n", settings.c_cflag & (CBAUD | CBAUDEX));
+/* printk("Speed: %d\n", settings.c_cflag & (CBAUD | CBAUDEX)); */
 	}
 	{
-		// Set low latency
+		/*  Set low latency */
 		struct serial_struct settings;
 
 		tty_ioctl(f, TIOCGSERIAL, (unsigned long)&settings);
@@ -393,7 +393,7 @@ static void serial_write(struct file *f, struct serial_data data)
 	}
 }
 
-static void serial_2002_open(struct comedi_device * dev)
+static void serial_2002_open(struct comedi_device *dev)
 {
 	char port[20];
 
@@ -437,7 +437,7 @@ static void serial_2002_open(struct comedi_device * dev)
 		}
 
 		tty_setspeed(devpriv->tty, devpriv->speed);
-		poll_channel(devpriv->tty, 31);	// Start reading configuration
+		poll_channel(devpriv->tty, 31);	/*  Start reading configuration */
 		while (1) {
 			struct serial_data data;
 
@@ -557,7 +557,7 @@ static void serial_2002_open(struct comedi_device * dev)
 			}
 		}
 		for (i = 0; i <= 4; i++) {
-			// Fill in subdev data
+			/*  Fill in subdev data */
 			struct config_t *c;
 			unsigned char *mapping = 0;
 			struct serial2002_range_table_t *range = 0;
@@ -659,15 +659,15 @@ static void serial_2002_open(struct comedi_device * dev)
 	}
 }
 
-static void serial_2002_close(struct comedi_device * dev)
+static void serial_2002_close(struct comedi_device *dev)
 {
 	if (!IS_ERR(devpriv->tty) && (devpriv->tty != 0)) {
 		filp_close(devpriv->tty, 0);
 	}
 }
 
-static int serial2002_di_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int serial2002_di_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n;
 	int chan;
@@ -688,8 +688,8 @@ static int serial2002_di_rinsn(struct comedi_device * dev, struct comedi_subdevi
 	return n;
 }
 
-static int serial2002_do_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int serial2002_do_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n;
 	int chan;
@@ -706,8 +706,8 @@ static int serial2002_do_winsn(struct comedi_device * dev, struct comedi_subdevi
 	return n;
 }
 
-static int serial2002_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int serial2002_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n;
 	int chan;
@@ -728,8 +728,8 @@ static int serial2002_ai_rinsn(struct comedi_device * dev, struct comedi_subdevi
 	return n;
 }
 
-static int serial2002_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int serial2002_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n;
 	int chan;
@@ -747,8 +747,8 @@ static int serial2002_ao_winsn(struct comedi_device * dev, struct comedi_subdevi
 	return n;
 }
 
-static int serial2002_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int serial2002_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n;
 	int chan = CR_CHAN(insn->chanspec);
@@ -760,8 +760,8 @@ static int serial2002_ao_rinsn(struct comedi_device * dev, struct comedi_subdevi
 	return n;
 }
 
-static int serial2002_ei_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int serial2002_ei_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n;
 	int chan;
@@ -782,7 +782,7 @@ static int serial2002_ei_rinsn(struct comedi_device * dev, struct comedi_subdevi
 	return n;
 }
 
-static int serial2002_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int serial2002_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 
@@ -849,7 +849,7 @@ static int serial2002_attach(struct comedi_device * dev, struct comedi_devconfig
 	return 1;
 }
 
-static int serial2002_detach(struct comedi_device * dev)
+static int serial2002_detach(struct comedi_device *dev)
 {
 	struct comedi_subdevice *s;
 	int i;
diff --git a/drivers/staging/comedi/drivers/skel.c b/drivers/staging/comedi/drivers/skel.c
index c7700d134cc..07f580a4820 100644
--- a/drivers/staging/comedi/drivers/skel.c
+++ b/drivers/staging/comedi/drivers/skel.c
@@ -97,16 +97,16 @@ struct skel_board {
 
 static const struct skel_board skel_boards[] = {
 	{
-	      name:	"skel-100",
-	      ai_chans:16,
-	      ai_bits:	12,
-	      have_dio:1,
+	.name = "skel-100",
+	.ai_chans = 16,
+	.ai_bits = 12,
+	.have_dio = 1,
 		},
 	{
-	      name:	"skel-200",
-	      ai_chans:8,
-	      ai_bits:	16,
-	      have_dio:0,
+	.name = "skel-200",
+	.ai_chans = 8,
+	.ai_bits = 16,
+	.have_dio = 0,
 		},
 };
 
@@ -154,13 +154,13 @@ struct skel_private {
  * the board, and also about the kernel module that contains
  * the device code.
  */
-static int skel_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int skel_detach(struct comedi_device * dev);
+static int skel_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int skel_detach(struct comedi_device *dev);
 static struct comedi_driver driver_skel = {
-      driver_name:"dummy",
-      module:THIS_MODULE,
-      attach:skel_attach,
-      detach:skel_detach,
+	.driver_name = "dummy",
+	.module = THIS_MODULE,
+	.attach = skel_attach,
+	.detach = skel_detach,
 /* It is not necessary to implement the following members if you are
  * writing a driver for a ISA PnP or PCI card */
 	/* Most drivers will support multiple types of boards by
@@ -179,23 +179,23 @@ static struct comedi_driver driver_skel = {
 	 * the type of board in software.  ISA PnP, PCI, and PCMCIA
 	 * devices are such boards.
 	 */
-      board_name:&skel_boards[0].name,
-      offset:sizeof(struct skel_board),
-      num_names:sizeof(skel_boards) / sizeof(struct skel_board),
+	.board_name = &skel_boards[0].name,
+	.offset = sizeof(struct skel_board),
+	.num_names = ARRAY_SIZE(skel_boards),
 };
 
-static int skel_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int skel_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int skel_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int skel_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int skel_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data);
-static int skel_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd);
+static int skel_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int skel_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int skel_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int skel_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int skel_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data);
+static int skel_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd);
 static int skel_ns_to_timer(unsigned int *ns, int round);
 
 /*
@@ -204,7 +204,7 @@ static int skel_ns_to_timer(unsigned int *ns, int round);
  * in the driver structure, dev->board_ptr contains that
  * address.
  */
-static int skel_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int skel_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 
@@ -292,7 +292,7 @@ static int skel_attach(struct comedi_device * dev, struct comedi_devconfig * it)
  * allocated by _attach().  dev->private and dev->subdevices are
  * deallocated automatically by the core.
  */
-static int skel_detach(struct comedi_device * dev)
+static int skel_detach(struct comedi_device *dev)
 {
 	printk("comedi%d: skel: remove\n", dev->minor);
 
@@ -303,8 +303,8 @@ static int skel_detach(struct comedi_device * dev)
  * "instructions" read/write data in "one-shot" or "software-triggered"
  * mode.
  */
-static int skel_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int skel_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int n, i;
 	unsigned int d;
@@ -331,9 +331,9 @@ static int skel_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s
 				break;
 		}
 		if (i == TIMEOUT) {
-			/* rt_printk() should be used instead of printk()
+			/* printk() should be used instead of printk()
 			 * whenever the code can be called from real-time. */
-			rt_printk("timeout\n");
+			printk("timeout\n");
 			return -ETIMEDOUT;
 		}
 
@@ -351,8 +351,8 @@ static int skel_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s
 	return n;
 }
 
-static int skel_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_cmd * cmd)
+static int skel_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_cmd *cmd)
 {
 	int err = 0;
 	int tmp;
@@ -520,8 +520,8 @@ static int skel_ns_to_timer(unsigned int *ns, int round)
 	return *ns;
 }
 
-static int skel_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int skel_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
@@ -541,8 +541,8 @@ static int skel_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s
 
 /* AO subdevices should have a read insn as well as a write insn.
  * Usually this means copying a value stored in devpriv. */
-static int skel_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int skel_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
@@ -558,8 +558,8 @@ static int skel_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s
  * useful to applications if you implement the insn_bits interface.
  * This allows packed reading/writing of the DIO channels.  The
  * comedi core can convert between insn_bits and insn_read/write */
-static int skel_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int skel_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	if (insn->n != 2)
 		return -EINVAL;
@@ -583,8 +583,8 @@ static int skel_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevic
 	return 2;
 }
 
-static int skel_dio_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
-	struct comedi_insn * insn, unsigned int * data)
+static int skel_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int chan = CR_CHAN(insn->chanspec);
 
diff --git a/drivers/staging/comedi/drivers/ssv_dnp.c b/drivers/staging/comedi/drivers/ssv_dnp.c
index 1628d216cdd..13c29bb9910 100644
--- a/drivers/staging/comedi/drivers/ssv_dnp.c
+++ b/drivers/staging/comedi/drivers/ssv_dnp.c
@@ -61,10 +61,10 @@ struct dnp_board {
 
 static const struct dnp_board dnp_boards[] = {	/* we only support one DNP 'board'   */
 	{			/* variant at the moment             */
-	      name:	"dnp-1486",
-	      ai_chans:16,
-	      ai_bits:	12,
-	      have_dio:1,
+	.name = "dnp-1486",
+	.ai_chans = 16,
+	.ai_bits = 12,
+	.have_dio = 1,
 		},
 };
 
@@ -74,7 +74,6 @@ static const struct dnp_board dnp_boards[] = {	/* we only support one DNP 'board
 /* This structure is for data unique to the DNP driver --------------------- */
 struct dnp_private_data {
 
-	//
 };
 
 
@@ -89,27 +88,27 @@ struct dnp_private_data {
 /* In the following section we define the API of this driver.                */
 /* ------------------------------------------------------------------------- */
 
-static int dnp_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int dnp_detach(struct comedi_device * dev);
+static int dnp_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int dnp_detach(struct comedi_device *dev);
 
 static struct comedi_driver driver_dnp = {
-      driver_name:"ssv_dnp",
-      module:THIS_MODULE,
-      attach:dnp_attach,
-      detach:dnp_detach,
-      board_name:&dnp_boards[0].name,
+	.driver_name = "ssv_dnp",
+	.module = THIS_MODULE,
+	.attach = dnp_attach,
+	.detach = dnp_detach,
+	.board_name = &dnp_boards[0].name,
 	/* only necessary for non-PnP devs   */
-      offset:sizeof(struct dnp_board),/* like ISA-PnP, PCI or PCMCIA.      */
-      num_names:sizeof(dnp_boards) / sizeof(struct dnp_board),
+	.offset = sizeof(struct dnp_board),/* like ISA-PnP, PCI or PCMCIA.      */
+	.num_names = ARRAY_SIZE(dnp_boards),
 };
 
 COMEDI_INITCLEANUP(driver_dnp);
 
-static int dnp_dio_insn_bits(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data);
+static int dnp_dio_insn_bits(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data);
 
-static int dnp_dio_insn_config(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data);
+static int dnp_dio_insn_config(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data);
 
 /* ------------------------------------------------------------------------- */
 /* Attach is called by comedi core to configure the driver for a particular  */
@@ -117,7 +116,7 @@ static int dnp_dio_insn_config(struct comedi_device * dev,
 /* dev->board_ptr contains that address.                                     */
 /* ------------------------------------------------------------------------- */
 
-static int dnp_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int dnp_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 
 	struct comedi_subdevice *s;
@@ -126,7 +125,7 @@ static int dnp_attach(struct comedi_device * dev, struct comedi_devconfig * it)
 
 	/* Autoprobing: this should find out which board we have. Currently only   */
 	/* the 1486 board is supported and autoprobing is not implemented :-)      */
-	//dev->board_ptr = dnp_probe(dev);
+	/* dev->board_ptr = dnp_probe(dev); */
 
 	/* Initialize the name of the board. We can use the "thisboard" macro now. */
 	dev->board_name = thisboard->name;
@@ -178,7 +177,7 @@ static int dnp_attach(struct comedi_device * dev, struct comedi_devconfig * it)
 /* deallocated automatically by the core.                                    */
 /* ------------------------------------------------------------------------- */
 
-static int dnp_detach(struct comedi_device * dev)
+static int dnp_detach(struct comedi_device *dev)
 {
 
 	/* configure all ports as input (default)                                  */
@@ -202,8 +201,8 @@ static int dnp_detach(struct comedi_device * dev)
 /* are able to use these instructions as well.                               */
 /* ------------------------------------------------------------------------- */
 
-static int dnp_dio_insn_bits(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+static int dnp_dio_insn_bits(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 
 	if (insn->n != 2)
@@ -252,8 +251,8 @@ static int dnp_dio_insn_bits(struct comedi_device * dev,
 /* COMEDI_INPUT or COMEDI_OUTPUT.                                            */
 /* ------------------------------------------------------------------------- */
 
-static int dnp_dio_insn_config(struct comedi_device * dev,
-	struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
+static int dnp_dio_insn_config(struct comedi_device *dev,
+	struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
 {
 
 	u8 register_buffer;
diff --git a/drivers/staging/comedi/drivers/unioxx5.c b/drivers/staging/comedi/drivers/unioxx5.c
index dd3b1119319..96bb15ccccb 100644
--- a/drivers/staging/comedi/drivers/unioxx5.c
+++ b/drivers/staging/comedi/drivers/unioxx5.c
@@ -80,38 +80,38 @@ struct unioxx5_subd_priv {
 	unsigned char usp_prev_cn_val[3];	/* previous channel value */
 };
 
-static int unioxx5_attach(struct comedi_device * dev, struct comedi_devconfig * it);
-static int unioxx5_subdev_write(struct comedi_device * dev, struct comedi_subdevice * subdev,
-	struct comedi_insn * insn, unsigned int * data);
-static int unioxx5_subdev_read(struct comedi_device * dev, struct comedi_subdevice * subdev,
-	struct comedi_insn * insn, unsigned int * data);
-static int unioxx5_insn_config(struct comedi_device * dev, struct comedi_subdevice * subdev,
-	struct comedi_insn * insn, unsigned int * data);
-static int unioxx5_detach(struct comedi_device * dev);
-static int __unioxx5_subdev_init(struct comedi_subdevice * subdev, int subdev_iobase,
+static int unioxx5_attach(struct comedi_device *dev, struct comedi_devconfig *it);
+static int unioxx5_subdev_write(struct comedi_device *dev, struct comedi_subdevice *subdev,
+	struct comedi_insn *insn, unsigned int *data);
+static int unioxx5_subdev_read(struct comedi_device *dev, struct comedi_subdevice *subdev,
+	struct comedi_insn *insn, unsigned int *data);
+static int unioxx5_insn_config(struct comedi_device *dev, struct comedi_subdevice *subdev,
+	struct comedi_insn *insn, unsigned int *data);
+static int unioxx5_detach(struct comedi_device *dev);
+static int __unioxx5_subdev_init(struct comedi_subdevice *subdev, int subdev_iobase,
 	int minor);
-static int __unioxx5_digital_write(struct unioxx5_subd_priv * usp, unsigned int * data,
+static int __unioxx5_digital_write(struct unioxx5_subd_priv *usp, unsigned int *data,
 	int channel, int minor);
-static int __unioxx5_digital_read(struct unioxx5_subd_priv * usp, unsigned int * data,
+static int __unioxx5_digital_read(struct unioxx5_subd_priv *usp, unsigned int *data,
 	int channel, int minor);
-//static void __unioxx5_digital_config(struct unioxx5_subd_priv* usp, int mode);
-static int __unioxx5_analog_write(struct unioxx5_subd_priv * usp, unsigned int * data,
+/* static void __unioxx5_digital_config(struct unioxx5_subd_priv* usp, int mode); */
+static int __unioxx5_analog_write(struct unioxx5_subd_priv *usp, unsigned int *data,
 	int channel, int minor);
-static int __unioxx5_analog_read(struct unioxx5_subd_priv * usp, unsigned int * data,
+static int __unioxx5_analog_read(struct unioxx5_subd_priv *usp, unsigned int *data,
 	int channel, int minor);
 static int __unioxx5_define_chan_offset(int chan_num);
-static void __unioxx5_analog_config(struct unioxx5_subd_priv * usp, int channel);
+static void __unioxx5_analog_config(struct unioxx5_subd_priv *usp, int channel);
 
 static struct comedi_driver unioxx5_driver = {
-      driver_name:DRIVER_NAME,
-      module:THIS_MODULE,
-      attach:unioxx5_attach,
-      detach:unioxx5_detach
+	.driver_name = DRIVER_NAME,
+	.module = THIS_MODULE,
+	.attach = unioxx5_attach,
+	.detach = unioxx5_detach
 };
 
 COMEDI_INITCLEANUP(unioxx5_driver);
 
-static int unioxx5_attach(struct comedi_device * dev, struct comedi_devconfig * it)
+static int unioxx5_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int iobase, i, n_subd;
 	int id, num, ba;
@@ -156,8 +156,8 @@ static int unioxx5_attach(struct comedi_device * dev, struct comedi_devconfig *
 	return 0;
 }
 
-static int unioxx5_subdev_read(struct comedi_device * dev, struct comedi_subdevice * subdev,
-	struct comedi_insn * insn, unsigned int * data)
+static int unioxx5_subdev_read(struct comedi_device *dev, struct comedi_subdevice *subdev,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	struct unioxx5_subd_priv *usp = subdev->private;
 	int channel, type;
@@ -176,8 +176,8 @@ static int unioxx5_subdev_read(struct comedi_device * dev, struct comedi_subdevi
 	return 1;
 }
 
-static int unioxx5_subdev_write(struct comedi_device * dev, struct comedi_subdevice * subdev,
-	struct comedi_insn * insn, unsigned int * data)
+static int unioxx5_subdev_write(struct comedi_device *dev, struct comedi_subdevice *subdev,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	struct unioxx5_subd_priv *usp = subdev->private;
 	int channel, type;
@@ -197,8 +197,8 @@ static int unioxx5_subdev_write(struct comedi_device * dev, struct comedi_subdev
 }
 
 /* for digital modules only */
-static int unioxx5_insn_config(struct comedi_device * dev, struct comedi_subdevice * subdev,
-	struct comedi_insn * insn, unsigned int * data)
+static int unioxx5_insn_config(struct comedi_device *dev, struct comedi_subdevice *subdev,
+	struct comedi_insn *insn, unsigned int *data)
 {
 	int channel_offset, flags, channel = CR_CHAN(insn->chanspec), type;
 	struct unioxx5_subd_priv *usp = subdev->private;
@@ -213,7 +213,8 @@ static int unioxx5_insn_config(struct comedi_device * dev, struct comedi_subdevi
 		return -1;
 	}
 
-	if ((channel_offset = __unioxx5_define_chan_offset(channel)) < 0) {
+	channel_offset = __unioxx5_define_chan_offset(channel);
+	if (channel_offset < 0) {
 		printk(KERN_ERR
 			"comedi%d: undefined channel %d. channel range is 0 .. 23\n",
 			dev->minor, channel);
@@ -247,7 +248,7 @@ static int unioxx5_insn_config(struct comedi_device * dev, struct comedi_subdevi
 	return 0;
 }
 
-static int unioxx5_detach(struct comedi_device * dev)
+static int unioxx5_detach(struct comedi_device *dev)
 {
 	int i;
 	struct comedi_subdevice *subdev;
@@ -264,7 +265,7 @@ static int unioxx5_detach(struct comedi_device * dev)
 }
 
 /* initializing subdevice with given address */
-static int __unioxx5_subdev_init(struct comedi_subdevice * subdev, int subdev_iobase,
+static int __unioxx5_subdev_init(struct comedi_subdevice *subdev, int subdev_iobase,
 	int minor)
 {
 	struct unioxx5_subd_priv *usp;
@@ -275,8 +276,9 @@ static int __unioxx5_subdev_init(struct comedi_subdevice * subdev, int subdev_io
 		return -EIO;
 	}
 
-	if ((usp = (struct unioxx5_subd_priv *) kzalloc(sizeof(*usp),
-				GFP_KERNEL)) == NULL) {
+	usp = (struct unioxx5_subd_priv *) kzalloc(sizeof(*usp), GFP_KERNEL);
+
+	if (usp == NULL) {
 		printk(KERN_ERR "comedi%d: erorr! --> out of memory!\n", minor);
 		return -1;
 	}
@@ -309,7 +311,7 @@ static int __unioxx5_subdev_init(struct comedi_subdevice * subdev, int subdev_io
 			usp->usp_module_type[i] = inb(subdev_iobase + 6);
 
 		printk(" [%d] 0x%02x |", i, usp->usp_module_type[i]);
-		comedi_udelay(1);
+		udelay(1);
 	}
 
 	printk("\n");
@@ -330,13 +332,14 @@ static int __unioxx5_subdev_init(struct comedi_subdevice * subdev, int subdev_io
 	return 0;
 }
 
-static int __unioxx5_digital_write(struct unioxx5_subd_priv * usp, unsigned int * data,
+static int __unioxx5_digital_write(struct unioxx5_subd_priv *usp, unsigned int *data,
 	int channel, int minor)
 {
 	int channel_offset, val;
 	int mask = 1 << (channel & 0x07);
 
-	if ((channel_offset = __unioxx5_define_chan_offset(channel)) < 0) {
+	channel_offset = __unioxx5_define_chan_offset(channel);
+	if (channel_offset < 0) {
 		printk(KERN_ERR
 			"comedi%d: undefined channel %d. channel range is 0 .. 23\n",
 			minor, channel);
@@ -357,12 +360,13 @@ static int __unioxx5_digital_write(struct unioxx5_subd_priv * usp, unsigned int
 }
 
 /* function for digital reading */
-static int __unioxx5_digital_read(struct unioxx5_subd_priv * usp, unsigned int * data,
+static int __unioxx5_digital_read(struct unioxx5_subd_priv *usp, unsigned int *data,
 	int channel, int minor)
 {
 	int channel_offset, mask = 1 << (channel & 0x07);
 
-	if ((channel_offset = __unioxx5_define_chan_offset(channel)) < 0) {
+	channel_offset = __unioxx5_define_chan_offset(channel);
+	if (channel_offset < 0) {
 		printk(KERN_ERR
 			"comedi%d: undefined channel %d. channel range is 0 .. 23\n",
 			minor, channel);
@@ -380,7 +384,7 @@ static int __unioxx5_digital_read(struct unioxx5_subd_priv * usp, unsigned int *
 }
 
 #if 0				/* not used? */
-static void __unioxx5_digital_config(struct unioxx5_subd_priv * usp, int mode)
+static void __unioxx5_digital_config(struct unioxx5_subd_priv *usp, int mode)
 {
 	int i, mask;
 
@@ -396,7 +400,7 @@ static void __unioxx5_digital_config(struct unioxx5_subd_priv * usp, int mode)
 }
 #endif
 
-static int __unioxx5_analog_write(struct unioxx5_subd_priv * usp, unsigned int * data,
+static int __unioxx5_analog_write(struct unioxx5_subd_priv *usp, unsigned int *data,
 	int channel, int minor)
 {
 	int module, i;
@@ -418,7 +422,7 @@ static int __unioxx5_analog_write(struct unioxx5_subd_priv * usp, unsigned int *
 	/* saving major byte */
 	usp->usp_extra_data[module][i] = (unsigned char)((*data & 0xFF00) >> 8);
 
-	//while(!((inb(usp->usp_iobase + 0)) & TxBE));
+	/* while(!((inb(usp->usp_iobase + 0)) & TxBE)); */
 	outb(module + 1, usp->usp_iobase + 5);	/* sending module number to card(1 .. 12) */
 	outb('W', usp->usp_iobase + 6);	/* sends (W)rite command to module */
 
@@ -431,7 +435,7 @@ static int __unioxx5_analog_write(struct unioxx5_subd_priv * usp, unsigned int *
 	return 1;
 }
 
-static int __unioxx5_analog_read(struct unioxx5_subd_priv * usp, unsigned int * data,
+static int __unioxx5_analog_read(struct unioxx5_subd_priv *usp, unsigned int *data,
 	int channel, int minor)
 {
 	int module_no, read_ch;
@@ -471,7 +475,7 @@ static int __unioxx5_analog_read(struct unioxx5_subd_priv * usp, unsigned int *
 }
 
 /* configure channels for analog i/o (even to output, odd to input) */
-static void __unioxx5_analog_config(struct unioxx5_subd_priv * usp, int channel)
+static void __unioxx5_analog_config(struct unioxx5_subd_priv *usp, int channel)
 {
 	int chan_a, chan_b, conf, channel_offset;
 
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index d0b59e98314..171a6f2ff74 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -509,14 +509,19 @@ static void usbduxsub_ai_IsocIrq(struct urb *urb)
 	for (i = 0; i < n; i++) {
 		/* transfer data */
 		if (CR_RANGE(s->async->cmd.chanlist[i]) <= 1) {
-			comedi_buf_put
+			err = comedi_buf_put
 				(s->async,
-				le16_to_cpu(this_usbduxsub->
-					inBuffer[i]) ^ 0x800);
+				 le16_to_cpu(this_usbduxsub->
+					     inBuffer[i]) ^ 0x800);
 		} else {
-			comedi_buf_put
+			err = comedi_buf_put
 				(s->async,
-				le16_to_cpu(this_usbduxsub->inBuffer[i]));
+				 le16_to_cpu(this_usbduxsub->inBuffer[i]));
+		}
+		if (unlikely(err == 0)) {
+			/* buffer overflow */
+			usbdux_ai_stop(this_usbduxsub, 0);
+			return;
 		}
 	}
 	/* tell comedi that data is there */
@@ -809,32 +814,56 @@ static int usbduxsub_upload(struct usbduxsub *usbduxsub,
 	return 0;
 }
 
-static int firmwareUpload(struct usbduxsub *usbduxsub, uint8_t *firmwareBinary,
+#define FIRMWARE_MAX_LEN 0x2000
+
+static int firmwareUpload(struct usbduxsub *usbduxsub,
+			  const u8 *firmwareBinary,
 			  int sizeFirmware)
 {
 	int ret;
+	uint8_t *fwBuf;
 
 	if (!firmwareBinary)
 		return 0;
 
+	if (sizeFirmware>FIRMWARE_MAX_LEN) {
+		dev_err(&usbduxsub->interface->dev,
+			"comedi_: usbdux firmware binary it too large for FX2.\n");
+		return -ENOMEM;
+	}
+
+	/* we generate a local buffer for the firmware */
+	fwBuf = kzalloc(sizeFirmware, GFP_KERNEL);
+	if (!fwBuf) {
+		dev_err(&usbduxsub->interface->dev,
+			"comedi_: mem alloc for firmware failed\n");
+		return -ENOMEM;
+	}
+	memcpy(fwBuf,firmwareBinary,sizeFirmware);
+
 	ret = usbduxsub_stop(usbduxsub);
 	if (ret < 0) {
 		dev_err(&usbduxsub->interface->dev,
 			"comedi_: can not stop firmware\n");
+		kfree(fwBuf);
 		return ret;
 	}
-	ret = usbduxsub_upload(usbduxsub, firmwareBinary, 0, sizeFirmware);
+
+	ret = usbduxsub_upload(usbduxsub, fwBuf, 0, sizeFirmware);
 	if (ret < 0) {
 		dev_err(&usbduxsub->interface->dev,
 			"comedi_: firmware upload failed\n");
+		kfree(fwBuf);
 		return ret;
 	}
 	ret = usbduxsub_start(usbduxsub);
 	if (ret < 0) {
 		dev_err(&usbduxsub->interface->dev,
 			"comedi_: can not start firmware\n");
+		kfree(fwBuf);
 		return ret;
 	}
+	kfree(fwBuf);
 	return 0;
 }
 
@@ -2260,134 +2289,6 @@ static void tidy_up(struct usbduxsub *usbduxsub_tmp)
 	usbduxsub_tmp->pwm_cmd_running = 0;
 }
 
-static unsigned hex2unsigned(char *h)
-{
-	unsigned hi, lo;
-
-	if (h[0] > '9')
-		hi = h[0] - 'A' + 0x0a;
-	else
-		hi = h[0] - '0';
-
-	if (h[1] > '9')
-		lo = h[1] - 'A' + 0x0a;
-	else
-		lo = h[1] - '0';
-
-	return hi * 0x10 + lo;
-}
-
-/* for FX2 */
-#define FIRMWARE_MAX_LEN 0x2000
-
-/* taken from David Brownell's fxload and adjusted for this driver */
-static int read_firmware(struct usbduxsub *usbduxsub, const void *firmwarePtr,
-			 long size)
-{
-	struct device *dev = &usbduxsub->interface->dev;
-	int i = 0;
-	unsigned char *fp = (char *)firmwarePtr;
-	unsigned char *firmwareBinary;
-	int res = 0;
-	int maxAddr = 0;
-
-	firmwareBinary = kzalloc(FIRMWARE_MAX_LEN, GFP_KERNEL);
-	if (!firmwareBinary) {
-		dev_err(dev, "comedi_: mem alloc for firmware failed\n");
-		return -ENOMEM;
-	}
-
-	for (;;) {
-		char buf[256], *cp;
-		char type;
-		int len;
-		int idx, off;
-		int j = 0;
-
-		/* get one line */
-		while ((i < size) && (fp[i] != 13) && (fp[i] != 10)) {
-			buf[j] = fp[i];
-			i++;
-			j++;
-			if (j >= sizeof(buf)) {
-				dev_err(dev, "comedi_: bogus firmware file!\n");
-				kfree(firmwareBinary);
-				return -1;
-			}
-		}
-		/* get rid of LF/CR/... */
-		while ((i < size) && ((fp[i] == 13) || (fp[i] == 10)
-				|| (fp[i] == 0))) {
-			i++;
-		}
-
-		buf[j] = 0;
-		/* dev_dbg(dev, "comedi_: buf=%s\n", buf); */
-
-		/*
-		 * EXTENSION:
-		 * "# comment-till-end-of-line", for copyrights etc
-		 */
-		if (buf[0] == '#')
-			continue;
-
-		if (buf[0] != ':') {
-			dev_err(dev, "comedi_: upload: not an ihex record: %s",
-				buf);
-			kfree(firmwareBinary);
-			return -EFAULT;
-		}
-
-		/* Read the length field (up to 16 bytes) */
-		len = hex2unsigned(buf + 1);
-
-		/* Read the target offset */
-		off = (hex2unsigned(buf + 3) * 0x0100) + hex2unsigned(buf + 5);
-
-		if ((off + len) > maxAddr)
-			maxAddr = off + len;
-
-
-		if (maxAddr >= FIRMWARE_MAX_LEN) {
-			dev_err(dev, "comedi_: firmware upload goes "
-				"beyond FX2 RAM boundaries.\n");
-			kfree(firmwareBinary);
-			return -EFAULT;
-		}
-		/* dev_dbg(dev, "comedi_: off=%x, len=%x:\n", off, len); */
-
-		/* Read the record type */
-		type = hex2unsigned(buf + 7);
-
-		/* If this is an EOF record, then make it so. */
-		if (type == 1)
-			break;
-
-
-		if (type != 0) {
-			dev_err(dev, "comedi_: unsupported record type: %u\n",
-				type);
-			kfree(firmwareBinary);
-			return -EFAULT;
-		}
-
-		for (idx = 0, cp = buf + 9; idx < len; idx += 1, cp += 2) {
-			firmwareBinary[idx + off] = hex2unsigned(cp);
-			/*printk("%02x ",firmwareBinary[idx+off]); */
-		}
-		/*printk("\n"); */
-
-		if (i >= size) {
-			dev_err(dev, "comedi_: unexpected end of hex file\n");
-			break;
-		}
-
-	}
-	res = firmwareUpload(usbduxsub, firmwareBinary, maxAddr + 1);
-	kfree(firmwareBinary);
-	return res;
-}
-
 static void usbdux_firmware_request_complete_handler(const struct firmware *fw,
 						     void *context)
 {
@@ -2405,7 +2306,7 @@ static void usbdux_firmware_request_complete_handler(const struct firmware *fw,
 	 * we need to upload the firmware here because fw will be
 	 * freed once we've left this function
 	 */
-	ret = read_firmware(usbduxsub_tmp, fw->data, fw->size);
+	ret = firmwareUpload(usbduxsub_tmp, fw->data, fw->size);
 
 	if (ret) {
 		dev_err(&usbdev->dev,
@@ -2662,11 +2563,13 @@ static int usbduxsub_probe(struct usb_interface *uinterf,
 
 	ret = request_firmware_nowait(THIS_MODULE,
 				      FW_ACTION_HOTPLUG,
-				      "usbdux_firmware.hex",
+				      "usbdux_firmware.bin",
 				      &udev->dev,
 				      usbduxsub + index,
 				      usbdux_firmware_request_complete_handler);
 
+
+
 	if (ret) {
 		dev_err(dev, "Could not load firmware (err=%d)\n", ret);
 		return ret;
@@ -2739,8 +2642,8 @@ static int usbdux_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	/* trying to upload the firmware into the chip */
 	if (comedi_aux_data(it->options, 0) &&
 		it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]) {
-		read_firmware(udev, comedi_aux_data(it->options, 0),
-			      it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]);
+		firmwareUpload(udev, comedi_aux_data(it->options, 0),
+			       it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]);
 	}
 
 	dev->board_name = BOARDNAME;
diff --git a/drivers/staging/comedi/drivers/usbduxfast.c b/drivers/staging/comedi/drivers/usbduxfast.c
index 2fb64de3f86..939b53fa569 100644
--- a/drivers/staging/comedi/drivers/usbduxfast.c
+++ b/drivers/staging/comedi/drivers/usbduxfast.c
@@ -314,7 +314,7 @@ static int usbduxfast_ai_cancel(struct comedi_device *dev, struct comedi_subdevi
  * analogue IN
  * interrupt service routine
  */
-static void usbduxfastsub_ai_Irq(struct urb *urb PT_REGS_ARG)
+static void usbduxfastsub_ai_Irq(struct urb *urb)
 {
 	int n, err;
 	struct usbduxfastsub_s *udfs;
@@ -406,7 +406,7 @@ static void usbduxfastsub_ai_Irq(struct urb *urb PT_REGS_ARG)
 					udfs->ai_sample_count
 					* sizeof(uint16_t));
 				usbduxfast_ai_stop(udfs, 0);
-				/* say comedi that the acquistion is over */
+				/* tell comedi that the acquistion is over */
 				s->async->events |= COMEDI_CB_EOA;
 				comedi_event(udfs->comedidev, s);
 				return;
@@ -414,8 +414,13 @@ static void usbduxfastsub_ai_Irq(struct urb *urb PT_REGS_ARG)
 			udfs->ai_sample_count -= n;
 		}
 		/* write the full buffer to comedi */
-		cfc_write_array_to_buffer(s, urb->transfer_buffer,
-					  urb->actual_length);
+		err = cfc_write_array_to_buffer(s, urb->transfer_buffer,
+						urb->actual_length);
+		if (unlikely(err == 0)) {
+			/* buffer overflow */
+			usbduxfast_ai_stop(udfs, 0);
+			return;
+		}
 
 		/* tell comedi that data is there */
 		comedi_event(udfs->comedidev, s);
@@ -524,33 +529,6 @@ static int usbduxfastsub_upload(struct usbduxfastsub_s *udfs,
 	return 0;
 }
 
-int firmwareUpload(struct usbduxfastsub_s *udfs, unsigned char *firmwareBinary,
-		   int sizeFirmware)
-{
-	int ret;
-
-	if (!firmwareBinary)
-		return 0;
-
-	ret = usbduxfastsub_stop(udfs);
-	if (ret < 0) {
-		printk(KERN_ERR "comedi_: usbduxfast: can not stop firmware\n");
-		return ret;
-	}
-	ret = usbduxfastsub_upload(udfs, firmwareBinary, 0, sizeFirmware);
-	if (ret < 0) {
-		printk(KERN_ERR "comedi_: usbduxfast: firmware upload failed\n");
-		return ret;
-	}
-	ret = usbduxfastsub_start(udfs);
-	if (ret < 0) {
-		printk(KERN_ERR "comedi_: usbduxfast: can not start firmware\n");
-		return ret;
-	}
-
-	return 0;
-}
-
 int usbduxfastsub_submit_InURBs(struct usbduxfastsub_s *udfs)
 {
 	int ret;
@@ -1365,136 +1343,61 @@ static int usbduxfast_ai_insn_read(struct comedi_device *dev,
 	return i;
 }
 
-static unsigned hex2unsigned(char *h)
-{
-	unsigned hi, lo;
-
-	if (h[0] > '9')
-		hi = h[0] - 'A' + 0x0a;
-	else
-		hi = h[0] - '0';
-
-	if (h[1] > '9')
-		lo = h[1] - 'A' + 0x0a;
-	else
-		lo = h[1] - '0';
-
-	return hi * 0x10 + lo;
-}
-
-/* for FX2 */
 #define FIRMWARE_MAX_LEN 0x2000
 
-/*
- * taken from David Brownell's fxload and adjusted for this driver
- */
-static int read_firmware(struct usbduxfastsub_s *udfs, const void *firmwarePtr,
-			 long size)
+static int firmwareUpload(struct usbduxfastsub_s *usbduxfastsub,
+			  const u8 *firmwareBinary,
+			  int sizeFirmware)
 {
-	int i = 0;
-	unsigned char *fp = (char *)firmwarePtr;
-	unsigned char *firmwareBinary;
-	int res = 0;
-	int maxAddr = 0;
-
-	firmwareBinary = kmalloc(FIRMWARE_MAX_LEN, GFP_KERNEL);
-	if (!firmwareBinary) {
-		printk(KERN_ERR "comedi_: usbduxfast: mem alloc for firmware "
-		       " failed\n");
-		return -ENOMEM;
-	}
-
-	for (;;) {
-		char buf[256], *cp;
-		char type;
-		int len;
-		int idx, off;
-		int j = 0;
-
-		/* get one line */
-		while ((i < size) && (fp[i] != 13) && (fp[i] != 10)) {
-			buf[j] = fp[i];
-			i++;
-			j++;
-			if (j >= sizeof(buf)) {
-				printk(KERN_ERR "comedi_: usbduxfast: bogus "
-				       "firmware file!\n");
-				kfree(firmwareBinary);
-				return -1;
-			}
-		}
-		/* get rid of LF/CR/... */
-		while ((i < size) && ((fp[i] == 13) || (fp[i] == 10)
-					|| (fp[i] == 0)))
-			i++;
-
-		buf[j] = 0;
-		/* printk("comedi_: buf=%s\n",buf); */
-
-		/*
-		 * EXTENSION: "# comment-till-end-of-line",
-		 * for copyrights etc
-		 */
-		if (buf[0] == '#')
-			continue;
-
-		if (buf[0] != ':') {
-			printk(KERN_ERR "comedi_: usbduxfast: upload: not an "
-			       "ihex record: %s", buf);
-			kfree(firmwareBinary);
-			return -EFAULT;
-		}
-
-		/* Read the length field (up to 16 bytes) */
-		len = hex2unsigned(buf + 1);
-
-		/* Read the target offset */
-		off = (hex2unsigned(buf + 3) * 0x0100) + hex2unsigned(buf + 5);
-
-		if ((off + len) > maxAddr)
-			maxAddr = off + len;
-
-		if (maxAddr >= FIRMWARE_MAX_LEN) {
-			printk(KERN_ERR "comedi_: usbduxfast: firmware upload "
-			       "goes beyond FX2 RAM boundaries.");
-			kfree(firmwareBinary);
-			return -EFAULT;
-		}
-		/* printk("comedi_: usbduxfast: off=%x, len=%x:",off,len); */
-
-		/* Read the record type */
-		type = hex2unsigned(buf + 7);
-
-		/* If this is an EOF record, then make it so. */
-		if (type == 1)
-			break;
+	int ret;
+	uint8_t *fwBuf;
 
-		if (type != 0) {
-			printk(KERN_ERR "comedi_: usbduxfast: unsupported "
-			       "record type: %u\n", type);
-			kfree(firmwareBinary);
-			return -EFAULT;
-		}
+	if (!firmwareBinary)
+		return 0;
 
-		for (idx = 0, cp = buf + 9; idx < len; idx += 1, cp += 2) {
-			firmwareBinary[idx + off] = hex2unsigned(cp);
-			/* printk("%02x ",firmwareBinary[idx+off]); */
-		}
+	if (sizeFirmware>FIRMWARE_MAX_LEN) {
+		dev_err(&usbduxfastsub->interface->dev,
+			"comedi_: usbduxfast firmware binary it too large for FX2.\n");
+		return -ENOMEM;
+	}
 
-		/* printk("\n"); */
+	/* we generate a local buffer for the firmware */
+	fwBuf = kzalloc(sizeFirmware, GFP_KERNEL);
+	if (!fwBuf) {
+		dev_err(&usbduxfastsub->interface->dev,
+			"comedi_: mem alloc for firmware failed\n");
+		return -ENOMEM;
+	}
+	memcpy(fwBuf,firmwareBinary,sizeFirmware);
 
-		if (i >= size) {
-			printk(KERN_ERR "comedi_: usbduxfast: unexpected end "
-			       "of hex file\n");
-			break;
-		}
+	ret = usbduxfastsub_stop(usbduxfastsub);
+	if (ret < 0) {
+		dev_err(&usbduxfastsub->interface->dev,
+			"comedi_: can not stop firmware\n");
+		kfree(fwBuf);
+		return ret;
+	}
 
+	ret = usbduxfastsub_upload(usbduxfastsub, fwBuf, 0, sizeFirmware);
+	if (ret < 0) {
+		dev_err(&usbduxfastsub->interface->dev,
+			"comedi_: firmware upload failed\n");
+		kfree(fwBuf);
+		return ret;
 	}
-	res = firmwareUpload(udfs, firmwareBinary, maxAddr + 1);
-	kfree(firmwareBinary);
-	return res;
+	ret = usbduxfastsub_start(usbduxfastsub);
+	if (ret < 0) {
+		dev_err(&usbduxfastsub->interface->dev,
+			"comedi_: can not start firmware\n");
+		kfree(fwBuf);
+		return ret;
+	}
+	kfree(fwBuf);
+	return 0;
 }
 
+
+
 static void tidy_up(struct usbduxfastsub_s *udfs)
 {
 #ifdef CONFIG_COMEDI_DEBUG
@@ -1544,7 +1447,7 @@ static void usbduxfast_firmware_request_complete_handler(const struct firmware *
 	 * we need to upload the firmware here because fw will be
 	 * freed once we've left this function
 	 */
-	ret = read_firmware(usbduxfastsub_tmp, fw->data, fw->size);
+	ret = firmwareUpload(usbduxfastsub_tmp, fw->data, fw->size);
 
 	if (ret) {
 		dev_err(&usbdev->dev,
@@ -1666,7 +1569,7 @@ static int usbduxfastsub_probe(struct usb_interface *uinterf,
 
 	ret = request_firmware_nowait(THIS_MODULE,
 				      FW_ACTION_HOTPLUG,
-				      "usbduxfast_firmware.hex",
+				      "usbduxfast_firmware.bin",
 				      &udev->dev,
 				      usbduxfastsub + index,
 				      usbduxfast_firmware_request_complete_handler);
@@ -1751,9 +1654,9 @@ static int usbduxfast_attach(struct comedi_device *dev, struct comedi_devconfig
 	/* trying to upload the firmware into the chip */
 	if (comedi_aux_data(it->options, 0) &&
 	    it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]) {
-		read_firmware(&usbduxfastsub[index],
-			      comedi_aux_data(it->options, 0),
-			      it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]);
+		firmwareUpload(&usbduxfastsub[index],
+			       comedi_aux_data(it->options, 0),
+			       it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]);
 	}
 
 	dev->board_name = BOARDNAME;
diff --git a/drivers/staging/comedi/drivers/vmk80xx.c b/drivers/staging/comedi/drivers/vmk80xx.c
new file mode 100644
index 00000000000..9de43b5310d
--- /dev/null
+++ b/drivers/staging/comedi/drivers/vmk80xx.c
@@ -0,0 +1,1399 @@
+/*
+    comedi/drivers/vmk80xx.c
+    Velleman USB Board Low-Level Driver
+
+    Copyright (C) 2009 Manuel Gebele <forensixs@gmx.de>, Germany
+
+    COMEDI - Linux Control and Measurement Device Interface
+    Copyright (C) 2000 David A. Schleef <ds@schleef.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+/*
+Driver: vmk80xx
+Description: Velleman USB Board Low-Level Driver
+Devices: K8055/K8061 aka VM110/VM140
+Author: Manuel Gebele <forensixs@gmx.de>
+Updated: Sun, 10 May 2009 11:14:59 +0200
+Status: works
+
+Supports:
+ - analog input
+ - analog output
+ - digital input
+ - digital output
+ - counter
+ - pwm
+*/
+/*
+Changelog:
+
+0.8.81	-3-  code completely rewritten (adjust driver logic)
+0.8.81  -2-  full support for K8061
+0.8.81  -1-  fix some mistaken among others the number of
+	     supported boards and I/O handling
+
+0.7.76  -4-  renamed to vmk80xx
+0.7.76  -3-  detect K8061 (only theoretically supported)
+0.7.76  -2-  code completely rewritten (adjust driver logic)
+0.7.76  -1-  support for digital and counter subdevice
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/poll.h>
+#include <linux/usb.h>
+#include <linux/uaccess.h>
+
+#include "../comedidev.h"
+
+MODULE_AUTHOR("Manuel Gebele <forensixs@gmx.de>");
+MODULE_DESCRIPTION("Velleman USB Board Low-Level Driver");
+MODULE_SUPPORTED_DEVICE("K8055/K8061 aka VM110/VM140");
+MODULE_VERSION("0.8.01");
+MODULE_LICENSE("GPL");
+
+enum {
+	DEVICE_VMK8055,
+	DEVICE_VMK8061
+};
+
+static struct usb_device_id vmk80xx_id_table[] = {
+	{ USB_DEVICE(0x10cf, 0x5500), .driver_info = DEVICE_VMK8055 },
+	{ USB_DEVICE(0x10cf, 0x5501), .driver_info = DEVICE_VMK8055 },
+	{ USB_DEVICE(0x10cf, 0x5502), .driver_info = DEVICE_VMK8055 },
+	{ USB_DEVICE(0x10cf, 0x5503), .driver_info = DEVICE_VMK8055 },
+	{ USB_DEVICE(0x10cf, 0x8061), .driver_info = DEVICE_VMK8061 },
+	{ USB_DEVICE(0x10cf, 0x8062), .driver_info = DEVICE_VMK8061 },
+	{ USB_DEVICE(0x10cf, 0x8063), .driver_info = DEVICE_VMK8061 },
+	{ USB_DEVICE(0x10cf, 0x8064), .driver_info = DEVICE_VMK8061 },
+	{ USB_DEVICE(0x10cf, 0x8065), .driver_info = DEVICE_VMK8061 },
+	{ USB_DEVICE(0x10cf, 0x8066), .driver_info = DEVICE_VMK8061 },
+	{ USB_DEVICE(0x10cf, 0x8067), .driver_info = DEVICE_VMK8061 },
+	{ USB_DEVICE(0x10cf, 0x8068), .driver_info = DEVICE_VMK8061 },
+	{ } /* terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, vmk80xx_id_table);
+
+#define VMK8055_DI_REG          0x00
+#define VMK8055_DO_REG          0x01
+#define VMK8055_AO1_REG         0x02
+#define VMK8055_AO2_REG         0x03
+#define VMK8055_AI1_REG         0x02
+#define VMK8055_AI2_REG         0x03
+#define VMK8055_CNT1_REG        0x04
+#define VMK8055_CNT2_REG        0x06
+
+#define VMK8061_CH_REG          0x01
+#define VMK8061_DI_REG          0x01
+#define VMK8061_DO_REG          0x01
+#define VMK8061_PWM_REG1        0x01
+#define VMK8061_PWM_REG2        0x02
+#define VMK8061_CNT_REG         0x02
+#define VMK8061_AO_REG          0x02
+#define VMK8061_AI_REG1         0x02
+#define VMK8061_AI_REG2         0x03
+
+#define VMK8055_CMD_RST         0x00
+#define VMK8055_CMD_DEB1_TIME   0x01
+#define VMK8055_CMD_DEB2_TIME   0x02
+#define VMK8055_CMD_RST_CNT1    0x03
+#define VMK8055_CMD_RST_CNT2    0x04
+#define VMK8055_CMD_WRT_AD      0x05
+
+#define VMK8061_CMD_RD_AI       0x00
+#define VMK8061_CMR_RD_ALL_AI   0x01    /* !non-active! */
+#define VMK8061_CMD_SET_AO      0x02
+#define VMK8061_CMD_SET_ALL_AO  0x03    /* !non-active! */
+#define VMK8061_CMD_OUT_PWM     0x04
+#define VMK8061_CMD_RD_DI       0x05
+#define VMK8061_CMD_DO          0x06    /* !non-active! */
+#define VMK8061_CMD_CLR_DO      0x07
+#define VMK8061_CMD_SET_DO      0x08
+#define VMK8061_CMD_RD_CNT      0x09    /* TODO: completely pointless? */
+#define VMK8061_CMD_RST_CNT     0x0a    /* TODO: completely pointless? */
+#define VMK8061_CMD_RD_VERSION  0x0b    /* internal usage */
+#define VMK8061_CMD_RD_JMP_STAT 0x0c    /* TODO: not implemented yet */
+#define VMK8061_CMD_RD_PWR_STAT 0x0d    /* internal usage */
+#define VMK8061_CMD_RD_DO       0x0e
+#define VMK8061_CMD_RD_AO       0x0f
+#define VMK8061_CMD_RD_PWM      0x10
+
+#define VMK80XX_MAX_BOARDS      COMEDI_NUM_BOARD_MINORS
+
+#define TRANS_OUT_BUSY          1
+#define TRANS_IN_BUSY           2
+#define TRANS_IN_RUNNING        3
+
+#define IC3_VERSION             (1 << 0)
+#define IC6_VERSION             (1 << 1)
+
+#define URB_RCV_FLAG            (1 << 0)
+#define URB_SND_FLAG            (1 << 1)
+
+#define CONFIG_VMK80XX_DEBUG
+#undef CONFIG_VMK80XX_DEBUG
+
+#ifdef CONFIG_VMK80XX_DEBUG
+ static int dbgvm = 1;
+#else
+ static int dbgvm;
+#endif
+
+#ifdef CONFIG_COMEDI_DEBUG
+ static int dbgcm = 1;
+#else
+ static int dbgcm;
+#endif
+
+#define dbgvm(fmt, arg...)                     \
+do {                                           \
+	if (dbgvm)                             \
+		printk(KERN_DEBUG fmt, ##arg); \
+} while (0)
+
+#define dbgcm(fmt, arg...)                     \
+do {                                           \
+	if (dbgcm)                             \
+		printk(KERN_DEBUG fmt, ##arg); \
+} while (0)
+
+enum vmk80xx_model {
+	VMK8055_MODEL,
+	VMK8061_MODEL
+};
+
+struct firmware_version {
+	unsigned char ic3_vers[32]; /* USB-Controller */
+	unsigned char ic6_vers[32]; /* CPU */
+};
+
+static const struct comedi_lrange vmk8055_range = {
+	1, { UNI_RANGE(5) }
+};
+
+static const struct comedi_lrange vmk8061_range = {
+	2, { UNI_RANGE(5), UNI_RANGE(10) }
+};
+
+struct vmk80xx_board {
+	const char *name;
+	enum vmk80xx_model model;
+	const struct comedi_lrange *range;
+	__u8   ai_chans;
+	__le16 ai_bits;
+	__u8   ao_chans;
+	__le16 ao_bits;
+	__u8   di_chans;
+	__le16 di_bits;
+	__u8   do_chans;
+	__le16 do_bits;
+	__u8   cnt_chans;
+	__le16 cnt_bits;
+	__u8   pwm_chans;
+	__le16 pwm_bits;
+};
+
+enum {
+	VMK80XX_SUBD_AI,
+	VMK80XX_SUBD_AO,
+	VMK80XX_SUBD_DI,
+	VMK80XX_SUBD_DO,
+	VMK80XX_SUBD_CNT,
+	VMK80XX_SUBD_PWM,
+};
+
+struct vmk80xx_usb {
+	struct usb_device *udev;
+	struct usb_interface *intf;
+	struct usb_endpoint_descriptor *ep_rx;
+	struct usb_endpoint_descriptor *ep_tx;
+	struct usb_anchor rx_anchor;
+	struct usb_anchor tx_anchor;
+	struct vmk80xx_board board;
+	struct firmware_version fw;
+	struct semaphore limit_sem;
+	wait_queue_head_t read_wait;
+	wait_queue_head_t write_wait;
+	unsigned char *usb_rx_buf;
+	unsigned char *usb_tx_buf;
+	unsigned long flags;
+	int probed;
+	int attached;
+	int count;
+};
+
+static struct vmk80xx_usb vmb[VMK80XX_MAX_BOARDS];
+
+static DEFINE_MUTEX(glb_mutex);
+
+static void vmk80xx_tx_callback(struct urb *urb)
+{
+	struct vmk80xx_usb *dev = urb->context;
+	int stat = urb->status;
+
+	dbgvm("vmk80xx: %s\n", __func__);
+
+	if (stat && !(stat == -ENOENT
+		 ||   stat == -ECONNRESET
+		 ||   stat == -ESHUTDOWN))
+		dbgcm("comedi#: vmk80xx: %s - nonzero urb status (%d)\n",
+		      __func__, stat);
+
+	if (!test_bit(TRANS_OUT_BUSY, &dev->flags))
+		return;
+
+	clear_bit(TRANS_OUT_BUSY, &dev->flags);
+
+	wake_up_interruptible(&dev->write_wait);
+}
+
+static void vmk80xx_rx_callback(struct urb *urb)
+{
+	struct vmk80xx_usb *dev = urb->context;
+	int stat = urb->status;
+
+	dbgvm("vmk80xx: %s\n", __func__);
+
+	switch (stat) {
+	case 0:
+		break;
+	case -ENOENT:
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		break;
+	default:
+		dbgcm("comedi#: vmk80xx: %s - nonzero urb status (%d)\n",
+		      __func__, stat);
+		goto resubmit;
+	}
+
+	goto exit;
+resubmit:
+	if (test_bit(TRANS_IN_RUNNING, &dev->flags) && dev->intf) {
+		usb_anchor_urb(urb, &dev->rx_anchor);
+
+		if (!usb_submit_urb(urb, GFP_KERNEL))
+			goto exit;
+
+		err("comedi#: vmk80xx: %s - submit urb failed\n", __func__);
+
+		usb_unanchor_urb(urb);
+	}
+exit:
+	clear_bit(TRANS_IN_BUSY, &dev->flags);
+
+	wake_up_interruptible(&dev->read_wait);
+}
+
+static int vmk80xx_check_data_link(struct vmk80xx_usb *dev)
+{
+	unsigned int tx_pipe, rx_pipe;
+	unsigned char tx[1], rx[2];
+
+	dbgvm("vmk80xx: %s\n", __func__);
+
+	tx_pipe = usb_sndbulkpipe(dev->udev, 0x01);
+	rx_pipe = usb_rcvbulkpipe(dev->udev, 0x81);
+
+	tx[0] = VMK8061_CMD_RD_PWR_STAT;
+
+	/* Check that IC6 (PIC16F871) is powered and
+	 * running and the data link between IC3 and
+	 * IC6 is working properly */
+	usb_bulk_msg(dev->udev, tx_pipe, tx, 1, NULL,
+		     dev->ep_tx->bInterval);
+	usb_bulk_msg(dev->udev, rx_pipe, rx, 2, NULL,
+		     HZ * 10);
+
+	return (int)rx[1];
+}
+
+static void vmk80xx_read_eeprom(struct vmk80xx_usb *dev, int flag)
+{
+	unsigned int tx_pipe, rx_pipe;
+	unsigned char tx[1], rx[64];
+	int cnt;
+
+	dbgvm("vmk80xx: %s\n", __func__);
+
+	tx_pipe = usb_sndbulkpipe(dev->udev, 0x01);
+	rx_pipe = usb_rcvbulkpipe(dev->udev, 0x81);
+
+	tx[0] = VMK8061_CMD_RD_VERSION;
+
+	/* Read the firmware version info of IC3 and
+	 * IC6 from the internal EEPROM of the IC */
+	usb_bulk_msg(dev->udev, tx_pipe, tx,  1, NULL,
+		     dev->ep_tx->bInterval);
+	usb_bulk_msg(dev->udev, rx_pipe, rx, 64, &cnt,
+		     HZ * 10);
+
+	rx[cnt] = '\0';
+
+	if (flag & IC3_VERSION)
+		strncpy(dev->fw.ic3_vers, rx +  1, 24);
+	else /* IC6_VERSION */
+		strncpy(dev->fw.ic6_vers, rx + 25, 24);
+}
+
+static int vmk80xx_reset_device(struct vmk80xx_usb *dev)
+{
+	struct urb *urb;
+	unsigned int tx_pipe;
+	int ival;
+	size_t size;
+
+	dbgvm("vmk80xx: %s\n", __func__);
+
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!urb)
+		return -ENOMEM;
+
+	tx_pipe = usb_sndintpipe(dev->udev, 0x01);
+
+	ival = dev->ep_tx->bInterval;
+	size = le16_to_cpu(dev->ep_tx->wMaxPacketSize);
+
+	dev->usb_tx_buf[0] = VMK8055_CMD_RST;
+	dev->usb_tx_buf[1] = 0x00;
+	dev->usb_tx_buf[2] = 0x00;
+	dev->usb_tx_buf[3] = 0x00;
+	dev->usb_tx_buf[4] = 0x00;
+	dev->usb_tx_buf[5] = 0x00;
+	dev->usb_tx_buf[6] = 0x00;
+	dev->usb_tx_buf[7] = 0x00;
+
+	usb_fill_int_urb(urb, dev->udev, tx_pipe, dev->usb_tx_buf,
+			 size, vmk80xx_tx_callback, dev, ival);
+
+	usb_anchor_urb(urb, &dev->tx_anchor);
+
+	return usb_submit_urb(urb, GFP_KERNEL);
+}
+
+static void vmk80xx_build_int_urb(struct urb *urb, int flag)
+{
+	struct vmk80xx_usb *dev = urb->context;
+	__u8 rx_addr, tx_addr;
+	unsigned int pipe;
+	unsigned char *buf;
+	size_t size;
+	void (*callback)(struct urb *);
+	int ival;
+
+	dbgvm("vmk80xx: %s\n", __func__);
+
+	if (flag & URB_RCV_FLAG) {
+		rx_addr = dev->ep_rx->bEndpointAddress;
+		pipe = usb_rcvintpipe(dev->udev, rx_addr);
+		buf = dev->usb_rx_buf;
+		size = le16_to_cpu(dev->ep_rx->wMaxPacketSize);
+		callback = vmk80xx_rx_callback;
+		ival = dev->ep_rx->bInterval;
+	} else { /* URB_SND_FLAG */
+		tx_addr = dev->ep_tx->bEndpointAddress;
+		pipe = usb_sndintpipe(dev->udev, tx_addr);
+		buf = dev->usb_tx_buf;
+		size = le16_to_cpu(dev->ep_tx->wMaxPacketSize);
+		callback = vmk80xx_tx_callback;
+		ival = dev->ep_tx->bInterval;
+	}
+
+	usb_fill_int_urb(urb, dev->udev, pipe, buf,
+			 size, callback, dev, ival);
+}
+
+static void vmk80xx_do_bulk_msg(struct vmk80xx_usb *dev)
+{
+	__u8 tx_addr, rx_addr;
+	unsigned int tx_pipe, rx_pipe;
+	size_t size;
+
+	dbgvm("vmk80xx: %s\n", __func__);
+
+	set_bit(TRANS_IN_BUSY, &dev->flags);
+	set_bit(TRANS_OUT_BUSY, &dev->flags);
+
+	tx_addr = dev->ep_tx->bEndpointAddress;
+	rx_addr = dev->ep_rx->bEndpointAddress;
+	tx_pipe = usb_sndbulkpipe(dev->udev, tx_addr);
+	rx_pipe = usb_rcvbulkpipe(dev->udev, rx_addr);
+
+	/* The max packet size attributes of the K8061
+	 * input/output endpoints are identical */
+	size = le16_to_cpu(dev->ep_tx->wMaxPacketSize);
+
+	usb_bulk_msg(dev->udev, tx_pipe, dev->usb_tx_buf,
+		     size, NULL, dev->ep_tx->bInterval);
+	usb_bulk_msg(dev->udev, rx_pipe, dev->usb_rx_buf,
+		     size, NULL, HZ * 10);
+
+	clear_bit(TRANS_OUT_BUSY, &dev->flags);
+	clear_bit(TRANS_IN_BUSY, &dev->flags);
+}
+
+static int vmk80xx_read_packet(struct vmk80xx_usb *dev)
+{
+	struct urb *urb;
+	int retval;
+
+	dbgvm("vmk80xx: %s\n", __func__);
+
+	if (!dev->intf)
+		return -ENODEV;
+
+	/* Only useful for interrupt transfers */
+	if (test_bit(TRANS_IN_BUSY, &dev->flags))
+		if (wait_event_interruptible(dev->read_wait,
+			!test_bit(TRANS_IN_BUSY, &dev->flags)))
+			return -ERESTART;
+
+	if (dev->board.model == VMK8061_MODEL) {
+		vmk80xx_do_bulk_msg(dev);
+
+		return 0;
+	}
+
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!urb)
+		return -ENOMEM;
+
+	urb->context = dev;
+	vmk80xx_build_int_urb(urb, URB_RCV_FLAG);
+
+	set_bit(TRANS_IN_RUNNING, &dev->flags);
+	set_bit(TRANS_IN_BUSY, &dev->flags);
+
+	usb_anchor_urb(urb, &dev->rx_anchor);
+
+	retval = usb_submit_urb(urb, GFP_KERNEL);
+	if (!retval)
+		goto exit;
+
+	clear_bit(TRANS_IN_RUNNING, &dev->flags);
+	usb_unanchor_urb(urb);
+
+exit:
+	usb_free_urb(urb);
+
+	return retval;
+}
+
+static int vmk80xx_write_packet(struct vmk80xx_usb *dev, int cmd)
+{
+	struct urb *urb;
+	int retval;
+
+	dbgvm("vmk80xx: %s\n", __func__);
+
+	if (!dev->intf)
+		return -ENODEV;
+
+	if (test_bit(TRANS_OUT_BUSY, &dev->flags))
+		if (wait_event_interruptible(dev->write_wait,
+			!test_bit(TRANS_OUT_BUSY, &dev->flags)))
+			return -ERESTART;
+
+	if (dev->board.model == VMK8061_MODEL) {
+		dev->usb_tx_buf[0] = cmd;
+		vmk80xx_do_bulk_msg(dev);
+
+		return 0;
+	}
+
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!urb)
+		return -ENOMEM;
+
+	urb->context = dev;
+	vmk80xx_build_int_urb(urb, URB_SND_FLAG);
+
+	set_bit(TRANS_OUT_BUSY, &dev->flags);
+
+	usb_anchor_urb(urb, &dev->tx_anchor);
+
+	dev->usb_tx_buf[0] = cmd;
+
+	retval = usb_submit_urb(urb, GFP_KERNEL);
+	if (!retval)
+		goto exit;
+
+	clear_bit(TRANS_OUT_BUSY, &dev->flags);
+	usb_unanchor_urb(urb);
+
+exit:
+	usb_free_urb(urb);
+
+	return retval;
+}
+
+#define DIR_IN  1
+#define DIR_OUT 2
+
+#define rudimentary_check(dir)                             \
+do {                                                       \
+	if (!dev)                                          \
+		return -EFAULT;                            \
+	if (!dev->probed)                                  \
+		return -ENODEV;                            \
+	if (!dev->attached)                                \
+		return -ENODEV;                            \
+	if ((dir) & DIR_IN) {                              \
+		if (test_bit(TRANS_IN_BUSY, &dev->flags))  \
+			return -EBUSY;                     \
+	} else {  /* DIR_OUT */                            \
+		if (test_bit(TRANS_OUT_BUSY, &dev->flags)) \
+			return -EBUSY;                     \
+	}                                                  \
+} while (0)
+
+static int vmk80xx_ai_rinsn(struct comedi_device *cdev,
+			    struct comedi_subdevice *s,
+			    struct comedi_insn *insn, unsigned int *data)
+{
+	struct vmk80xx_usb *dev = cdev->private;
+	int chan, reg[2];
+	int n;
+
+	dbgvm("vmk80xx: %s\n", __func__);
+
+	rudimentary_check(DIR_IN);
+
+	down(&dev->limit_sem);
+	chan = CR_CHAN(insn->chanspec);
+
+	switch (dev->board.model) {
+	case VMK8055_MODEL:
+		if (!chan)
+			reg[0] = VMK8055_AI1_REG;
+		else
+			reg[0] = VMK8055_AI2_REG;
+		break;
+	case VMK8061_MODEL:
+		reg[0] = VMK8061_AI_REG1;
+		reg[1] = VMK8061_AI_REG2;
+		dev->usb_tx_buf[0] = VMK8061_CMD_RD_AI;
+		dev->usb_tx_buf[VMK8061_CH_REG] = chan;
+		break;
+	}
+
+	for (n = 0; n < insn->n; n++) {
+		if (vmk80xx_read_packet(dev))
+			break;
+
+		if (dev->board.model == VMK8055_MODEL) {
+			data[n] = dev->usb_rx_buf[reg[0]];
+			continue;
+		}
+
+		/* VMK8061_MODEL */
+		data[n] = dev->usb_rx_buf[reg[0]] + 256 *
+			  dev->usb_rx_buf[reg[1]];
+	}
+
+	up(&dev->limit_sem);
+
+	return n;
+}
+
+static int vmk80xx_ao_winsn(struct comedi_device *cdev,
+			    struct comedi_subdevice *s,
+			    struct comedi_insn *insn, unsigned int *data)
+{
+	struct vmk80xx_usb *dev = cdev->private;
+	int chan, cmd, reg;
+	int n;
+
+	dbgvm("vmk80xx: %s\n", __func__);
+
+	rudimentary_check(DIR_OUT);
+
+	down(&dev->limit_sem);
+	chan = CR_CHAN(insn->chanspec);
+
+	switch (dev->board.model) {
+	case VMK8055_MODEL:
+		cmd = VMK8055_CMD_WRT_AD;
+		if (!chan)
+			reg = VMK8055_AO1_REG;
+		else
+			reg = VMK8055_AO2_REG;
+		break;
+	default: /* NOTE: avoid compiler warnings */
+		cmd = VMK8061_CMD_SET_AO;
+		reg = VMK8061_AO_REG;
+		dev->usb_tx_buf[VMK8061_CH_REG] = chan;
+		break;
+	}
+
+	for (n = 0; n < insn->n; n++) {
+		dev->usb_tx_buf[reg] = data[n];
+
+		if (vmk80xx_write_packet(dev, cmd))
+			break;
+	}
+
+	up(&dev->limit_sem);
+
+	return n;
+}
+
+static int vmk80xx_ao_rinsn(struct comedi_device *cdev,
+			    struct comedi_subdevice *s,
+			    struct comedi_insn *insn, unsigned int *data)
+{
+	struct vmk80xx_usb *dev = cdev->private;
+	int chan, reg;
+	int n;
+
+	dbgvm("vmk80xx: %s\n", __func__);
+
+	rudimentary_check(DIR_IN);
+
+	down(&dev->limit_sem);
+	chan = CR_CHAN(insn->chanspec);
+
+	reg = VMK8061_AO_REG - 1;
+
+	dev->usb_tx_buf[0] = VMK8061_CMD_RD_AO;
+
+	for (n = 0; n < insn->n; n++) {
+		if (vmk80xx_read_packet(dev))
+			break;
+
+		data[n] = dev->usb_rx_buf[reg+chan];
+	}
+
+	up(&dev->limit_sem);
+
+	return n;
+}
+
+static int vmk80xx_di_rinsn(struct comedi_device *cdev,
+			    struct comedi_subdevice *s,
+			    struct comedi_insn *insn, unsigned int *data)
+{
+	struct vmk80xx_usb *dev = cdev->private;
+	int chan;
+	unsigned char *rx_buf;
+	int reg, inp;
+	int n;
+
+	dbgvm("vmk80xx: %s\n", __func__);
+
+	rudimentary_check(DIR_IN);
+
+	down(&dev->limit_sem);
+	chan = CR_CHAN(insn->chanspec);
+
+	rx_buf = dev->usb_rx_buf;
+
+	if (dev->board.model == VMK8061_MODEL) {
+		reg = VMK8061_DI_REG;
+		dev->usb_tx_buf[0] = VMK8061_CMD_RD_DI;
+	} else
+		reg = VMK8055_DI_REG;
+
+	for (n = 0; n < insn->n; n++) {
+		if (vmk80xx_read_packet(dev))
+			break;
+
+		if (dev->board.model == VMK8055_MODEL)
+			inp = (((rx_buf[reg] >> 4) & 0x03) |
+			       ((rx_buf[reg] << 2) & 0x04) |
+			       ((rx_buf[reg] >> 3) & 0x18));
+		else
+			inp = rx_buf[reg];
+
+		data[n] = ((inp & (1 << chan)) > 0);
+	}
+
+	up(&dev->limit_sem);
+
+	return n;
+}
+
+static int vmk80xx_do_winsn(struct comedi_device *cdev,
+			    struct comedi_subdevice *s,
+			    struct comedi_insn *insn, unsigned int *data)
+{
+
+	struct vmk80xx_usb *dev = cdev->private;
+	int chan;
+	unsigned char *tx_buf;
+	int reg, cmd;
+	int n;
+
+	dbgvm("vmk80xx: %s\n", __func__);
+
+	rudimentary_check(DIR_OUT);
+
+	down(&dev->limit_sem);
+	chan = CR_CHAN(insn->chanspec);
+
+	tx_buf = dev->usb_tx_buf;
+
+	for (n = 0; n < insn->n; n++) {
+		if (dev->board.model == VMK8055_MODEL) {
+			reg = VMK8055_DO_REG;
+			cmd = VMK8055_CMD_WRT_AD;
+			if (data[n] == 1)
+				tx_buf[reg] |= (1 << chan);
+			else
+				tx_buf[reg] ^= (1 << chan);
+
+			goto write_packet;
+		}
+
+		/* VMK8061_MODEL */
+		reg = VMK8061_DO_REG;
+		if (data[n] == 1) {
+			cmd = VMK8061_CMD_SET_DO;
+			tx_buf[reg] = 1 << chan;
+		} else {
+			cmd = VMK8061_CMD_CLR_DO;
+			tx_buf[reg] = 0xff - (1 << chan);
+		}
+
+write_packet:
+		if (vmk80xx_write_packet(dev, cmd))
+			break;
+	}
+
+	up(&dev->limit_sem);
+
+	return n;
+}
+
+static int vmk80xx_do_rinsn(struct comedi_device *cdev,
+			    struct comedi_subdevice *s,
+			    struct comedi_insn *insn, unsigned int *data)
+{
+	struct vmk80xx_usb *dev = cdev->private;
+	int chan, reg, mask;
+	int n;
+
+	dbgvm("vmk80xx: %s\n", __func__);
+
+	rudimentary_check(DIR_IN);
+
+	down(&dev->limit_sem);
+	chan = CR_CHAN(insn->chanspec);
+
+	reg = VMK8061_DO_REG;
+	mask = 1 << chan;
+
+	dev->usb_tx_buf[0] = VMK8061_CMD_RD_DO;
+
+	for (n = 0; n < insn->n; n++) {
+		if (vmk80xx_read_packet(dev))
+			break;
+
+		data[n] = (dev->usb_rx_buf[reg] & mask) >> chan;
+	}
+
+	up(&dev->limit_sem);
+
+	return n;
+}
+
+static int vmk80xx_cnt_rinsn(struct comedi_device *cdev,
+			     struct comedi_subdevice *s,
+			     struct comedi_insn *insn, unsigned int *data)
+{
+	struct vmk80xx_usb *dev = cdev->private;
+	int chan, reg[2];
+	int n;
+
+	dbgvm("vmk80xx: %s\n", __func__);
+
+	rudimentary_check(DIR_IN);
+
+	down(&dev->limit_sem);
+	chan = CR_CHAN(insn->chanspec);
+
+	switch (dev->board.model) {
+	case VMK8055_MODEL:
+		if (!chan)
+			reg[0] = VMK8055_CNT1_REG;
+		else
+			reg[0] = VMK8055_CNT2_REG;
+		break;
+	case VMK8061_MODEL:
+		reg[0] = VMK8061_CNT_REG;
+		reg[1] = VMK8061_CNT_REG;
+		dev->usb_tx_buf[0] = VMK8061_CMD_RD_CNT;
+		break;
+	}
+
+	for (n = 0; n < insn->n; n++) {
+		if (vmk80xx_read_packet(dev))
+			break;
+
+		if (dev->board.model == VMK8055_MODEL) {
+			data[n] = dev->usb_rx_buf[reg[0]];
+			continue;
+		}
+
+		/* VMK8061_MODEL */
+		data[n] = dev->usb_rx_buf[reg[0]*(chan+1)+1]
+		  + 256 * dev->usb_rx_buf[reg[1]*2+2];
+	}
+
+	up(&dev->limit_sem);
+
+	return n;
+}
+
+static int vmk80xx_cnt_cinsn(struct comedi_device *cdev,
+			     struct comedi_subdevice *s,
+			     struct comedi_insn *insn, unsigned int *data)
+{
+	struct vmk80xx_usb *dev = cdev->private;
+	unsigned int insn_cmd;
+	int chan, cmd, reg;
+	int n;
+
+	dbgvm("vmk80xx: %s\n", __func__);
+
+	rudimentary_check(DIR_OUT);
+
+	down(&dev->limit_sem);
+
+	insn_cmd = data[0];
+	if (insn_cmd != INSN_CONFIG_RESET && insn_cmd != GPCT_RESET)
+		return -EINVAL;
+
+	chan = CR_CHAN(insn->chanspec);
+
+	if (dev->board.model == VMK8055_MODEL) {
+		if (!chan) {
+			cmd = VMK8055_CMD_RST_CNT1;
+			reg = VMK8055_CNT1_REG;
+		} else {
+			cmd = VMK8055_CMD_RST_CNT2;
+			reg = VMK8055_CNT2_REG;
+		}
+
+		dev->usb_tx_buf[reg] = 0x00;
+	} else
+		cmd = VMK8061_CMD_RST_CNT;
+
+	for (n = 0; n < insn->n; n++)
+		if (vmk80xx_write_packet(dev, cmd))
+			break;
+
+	up(&dev->limit_sem);
+
+	return n;
+}
+
+static int vmk80xx_cnt_winsn(struct comedi_device *cdev,
+			     struct comedi_subdevice *s,
+			     struct comedi_insn *insn, unsigned int *data)
+{
+	struct vmk80xx_usb *dev = cdev->private;
+	unsigned long debtime, val;
+	int chan, cmd;
+	int n;
+
+	dbgvm("vmk80xx: %s\n", __func__);
+
+	rudimentary_check(DIR_OUT);
+
+	down(&dev->limit_sem);
+	chan = CR_CHAN(insn->chanspec);
+
+	if (!chan)
+		cmd = VMK8055_CMD_DEB1_TIME;
+	else
+		cmd = VMK8055_CMD_DEB2_TIME;
+
+	for (n = 0; n < insn->n; n++) {
+		debtime = data[n];
+		if (debtime == 0)
+			debtime = 1;
+
+		/* TODO: Prevent overflows */
+		if (debtime > 7450)
+			debtime = 7450;
+
+		val = int_sqrt(debtime * 1000 / 115);
+		if (((val + 1) * val) < debtime * 1000 / 115)
+			val += 1;
+
+		dev->usb_tx_buf[6+chan] = val;
+
+		if (vmk80xx_write_packet(dev, cmd))
+			break;
+	}
+
+	up(&dev->limit_sem);
+
+	return n;
+}
+
+static int vmk80xx_pwm_rinsn(struct comedi_device *cdev,
+			     struct comedi_subdevice *s,
+			     struct comedi_insn *insn, unsigned int *data)
+{
+	struct vmk80xx_usb *dev = cdev->private;
+	int reg[2];
+	int n;
+
+	dbgvm("vmk80xx: %s\n", __func__);
+
+	rudimentary_check(DIR_IN);
+
+	down(&dev->limit_sem);
+
+	reg[0] = VMK8061_PWM_REG1;
+	reg[1] = VMK8061_PWM_REG2;
+
+	dev->usb_tx_buf[0] = VMK8061_CMD_RD_PWM;
+
+	for (n = 0; n < insn->n; n++) {
+		if (vmk80xx_read_packet(dev))
+			break;
+
+		data[n] = dev->usb_rx_buf[reg[0]] + 4 *
+			  dev->usb_rx_buf[reg[1]];
+	}
+
+	up(&dev->limit_sem);
+
+	return n;
+}
+
+static int vmk80xx_pwm_winsn(struct comedi_device *cdev,
+			     struct comedi_subdevice *s,
+			     struct comedi_insn *insn, unsigned int *data)
+{
+	struct vmk80xx_usb *dev = cdev->private;
+	unsigned char *tx_buf;
+	int reg[2], cmd;
+	int n;
+
+	dbgvm("vmk80xx: %s\n", __func__);
+
+	rudimentary_check(DIR_OUT);
+
+	down(&dev->limit_sem);
+
+	tx_buf = dev->usb_tx_buf;
+
+	reg[0] = VMK8061_PWM_REG1;
+	reg[1] = VMK8061_PWM_REG2;
+
+	cmd = VMK8061_CMD_OUT_PWM;
+
+	/*
+	 * The followin piece of code was translated from the inline
+	 * assembler code in the DLL source code.
+	 *
+	 * asm
+	 *   mov eax, k  ; k is the value (data[n])
+	 *   and al, 03h ; al are the lower 8 bits of eax
+	 *   mov lo, al  ; lo is the low part (tx_buf[reg[0]])
+	 *   mov eax, k
+	 *   shr eax, 2  ; right shift eax register by 2
+	 *   mov hi, al  ; hi is the high part (tx_buf[reg[1]])
+	 * end;
+	 */
+	for (n = 0; n < insn->n; n++) {
+		tx_buf[reg[0]] = (unsigned char)(data[n] & 0x03);
+		tx_buf[reg[1]] = (unsigned char)(data[n] >> 2) & 0xff;
+
+		if (vmk80xx_write_packet(dev, cmd))
+			break;
+	}
+
+	up(&dev->limit_sem);
+
+	return n;
+}
+
+static int
+vmk80xx_attach(struct comedi_device *cdev, struct comedi_devconfig *it)
+{
+	int i;
+	struct vmk80xx_usb *dev;
+	int n_subd;
+	struct comedi_subdevice *s;
+	int minor;
+
+	dbgvm("vmk80xx: %s\n", __func__);
+
+	mutex_lock(&glb_mutex);
+
+	for (i = 0; i < VMK80XX_MAX_BOARDS; i++)
+		if (vmb[i].probed && !vmb[i].attached)
+			break;
+
+	if (i == VMK80XX_MAX_BOARDS) {
+		mutex_unlock(&glb_mutex);
+		return -ENODEV;
+	}
+
+	dev = &vmb[i];
+
+	down(&dev->limit_sem);
+
+	cdev->board_name = dev->board.name;
+	cdev->private = dev;
+
+	if (dev->board.model == VMK8055_MODEL)
+		n_subd = 5;
+	else
+		n_subd = 6;
+
+	if (alloc_subdevices(cdev, n_subd) < 0) {
+		up(&dev->limit_sem);
+		mutex_unlock(&glb_mutex);
+		return -ENOMEM;
+	}
+
+	/* Analog input subdevice */
+	s = cdev->subdevices + VMK80XX_SUBD_AI;
+	s->type = COMEDI_SUBD_AI;
+	s->subdev_flags = SDF_READABLE | SDF_GROUND;
+	s->n_chan = dev->board.ai_chans;
+	s->maxdata = (1 << dev->board.ai_bits) - 1;
+	s->range_table = dev->board.range;
+	s->insn_read = vmk80xx_ai_rinsn;
+
+	/* Analog output subdevice */
+	s = cdev->subdevices + VMK80XX_SUBD_AO;
+	s->type = COMEDI_SUBD_AO;
+	s->subdev_flags = SDF_WRITEABLE | SDF_GROUND;
+	s->n_chan = dev->board.ao_chans;
+	s->maxdata = (1 << dev->board.ao_bits) - 1;
+	s->range_table = dev->board.range;
+	s->insn_write = vmk80xx_ao_winsn;
+
+	if (dev->board.model == VMK8061_MODEL) {
+		s->subdev_flags |= SDF_READABLE;
+		s->insn_read = vmk80xx_ao_rinsn;
+	}
+
+	/* Digital input subdevice */
+	s = cdev->subdevices + VMK80XX_SUBD_DI;
+	s->type = COMEDI_SUBD_DI;
+	s->subdev_flags = SDF_READABLE | SDF_GROUND;
+	s->n_chan = dev->board.di_chans;
+	s->maxdata = (1 << dev->board.di_bits) - 1;
+	s->insn_read = vmk80xx_di_rinsn;
+
+	/* Digital output subdevice */
+	s = cdev->subdevices + VMK80XX_SUBD_DO;
+	s->type = COMEDI_SUBD_DO;
+	s->subdev_flags = SDF_WRITEABLE | SDF_GROUND;
+	s->n_chan = dev->board.do_chans;
+	s->maxdata = (1 << dev->board.do_bits) - 1;
+	s->insn_write = vmk80xx_do_winsn;
+
+	if (dev->board.model == VMK8061_MODEL) {
+		s->subdev_flags |= SDF_READABLE;
+		s->insn_read = vmk80xx_do_rinsn;
+	}
+
+	/* Counter subdevice */
+	s = cdev->subdevices + VMK80XX_SUBD_CNT;
+	s->type = COMEDI_SUBD_COUNTER;
+	s->subdev_flags = SDF_READABLE;
+	s->n_chan = dev->board.cnt_chans;
+	s->insn_read = vmk80xx_cnt_rinsn;
+	s->insn_config = vmk80xx_cnt_cinsn;
+
+	if (dev->board.model == VMK8055_MODEL) {
+		s->subdev_flags |= SDF_WRITEABLE;
+		s->maxdata = (1 << dev->board.cnt_bits) - 1;
+		s->insn_write = vmk80xx_cnt_winsn;
+	}
+
+	/* PWM subdevice */
+	if (dev->board.model == VMK8061_MODEL) {
+		s = cdev->subdevices + VMK80XX_SUBD_PWM;
+		s->type = COMEDI_SUBD_PWM;
+		s->subdev_flags = SDF_READABLE | SDF_WRITEABLE;
+		s->n_chan = dev->board.pwm_chans;
+		s->maxdata = (1 << dev->board.pwm_bits) - 1;
+		s->insn_read = vmk80xx_pwm_rinsn;
+		s->insn_write = vmk80xx_pwm_winsn;
+	}
+
+	dev->attached = 1;
+
+	minor = cdev->minor;
+
+	printk(KERN_INFO
+	       "comedi%d: vmk80xx: board #%d [%s] attached to comedi\n",
+	       minor, dev->count, dev->board.name);
+
+	up(&dev->limit_sem);
+	mutex_unlock(&glb_mutex);
+
+	return 0;
+}
+
+static int vmk80xx_detach(struct comedi_device *cdev)
+{
+	struct vmk80xx_usb *dev;
+	int minor;
+
+	dbgvm("vmk80xx: %s\n", __func__);
+
+	if (!cdev)
+		return -EFAULT;
+
+	dev = cdev->private;
+	if (!dev)
+		return -EFAULT;
+
+	down(&dev->limit_sem);
+
+	cdev->private = NULL;
+	dev->attached = 0;
+
+	minor = cdev->minor;
+
+	printk(KERN_INFO
+	       "comedi%d: vmk80xx: board #%d [%s] detached from comedi\n",
+	       minor, dev->count, dev->board.name);
+
+	up(&dev->limit_sem);
+
+	return 0;
+}
+
+static int
+vmk80xx_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	int i;
+	struct vmk80xx_usb *dev;
+	struct usb_host_interface *iface_desc;
+	struct usb_endpoint_descriptor *ep_desc;
+	size_t size;
+
+	dbgvm("vmk80xx: %s\n", __func__);
+
+	mutex_lock(&glb_mutex);
+
+	for (i = 0; i < VMK80XX_MAX_BOARDS; i++)
+		if (!vmb[i].probed)
+			break;
+
+	if (i == VMK80XX_MAX_BOARDS) {
+		mutex_unlock(&glb_mutex);
+		return -EMFILE;
+	}
+
+	dev = &vmb[i];
+
+	memset(dev, 0x00, sizeof(struct vmk80xx_usb));
+	dev->count = i;
+
+	iface_desc = intf->cur_altsetting;
+	if (iface_desc->desc.bNumEndpoints != 2)
+		goto error;
+
+	for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
+		ep_desc = &iface_desc->endpoint[i].desc;
+
+		if (usb_endpoint_is_int_in(ep_desc)) {
+			dev->ep_rx = ep_desc;
+			continue;
+		}
+
+		if (usb_endpoint_is_int_out(ep_desc)) {
+			dev->ep_tx = ep_desc;
+			continue;
+		}
+
+		if (usb_endpoint_is_bulk_in(ep_desc)) {
+			dev->ep_rx = ep_desc;
+			continue;
+		}
+
+		if (usb_endpoint_is_bulk_out(ep_desc)) {
+			dev->ep_tx = ep_desc;
+			continue;
+		}
+	}
+
+	if (!dev->ep_rx || !dev->ep_tx)
+		goto error;
+
+	size = le16_to_cpu(dev->ep_rx->wMaxPacketSize);
+	dev->usb_rx_buf = kmalloc(size, GFP_KERNEL);
+	if (!dev->usb_rx_buf) {
+		mutex_unlock(&glb_mutex);
+		return -ENOMEM;
+	}
+
+	size = le16_to_cpu(dev->ep_tx->wMaxPacketSize);
+	dev->usb_tx_buf = kmalloc(size, GFP_KERNEL);
+	if (!dev->usb_tx_buf) {
+		kfree(dev->usb_rx_buf);
+		mutex_unlock(&glb_mutex);
+		return -ENOMEM;
+	}
+
+	dev->udev = interface_to_usbdev(intf);
+	dev->intf = intf;
+
+	sema_init(&dev->limit_sem, 8);
+	init_waitqueue_head(&dev->read_wait);
+	init_waitqueue_head(&dev->write_wait);
+
+	init_usb_anchor(&dev->rx_anchor);
+	init_usb_anchor(&dev->tx_anchor);
+
+	usb_set_intfdata(intf, dev);
+
+	switch (id->driver_info) {
+	case DEVICE_VMK8055:
+		dev->board.name = "K8055 (VM110)";
+		dev->board.model = VMK8055_MODEL;
+		dev->board.range = &vmk8055_range;
+		dev->board.ai_chans = 2;
+		dev->board.ai_bits = 8;
+		dev->board.ao_chans = 2;
+		dev->board.ao_bits = 8;
+		dev->board.di_chans = 5;
+		dev->board.di_bits = 1;
+		dev->board.do_chans = 8;
+		dev->board.do_bits = 1;
+		dev->board.cnt_chans = 2;
+		dev->board.cnt_bits = 16;
+		dev->board.pwm_chans = 0;
+		dev->board.pwm_bits = 0;
+		break;
+	case DEVICE_VMK8061:
+		dev->board.name = "K8061 (VM140)";
+		dev->board.model = VMK8061_MODEL;
+		dev->board.range = &vmk8061_range;
+		dev->board.ai_chans = 8;
+		dev->board.ai_bits = 10;
+		dev->board.ao_chans = 8;
+		dev->board.ao_bits = 8;
+		dev->board.di_chans = 8;
+		dev->board.di_bits = 1;
+		dev->board.do_chans = 8;
+		dev->board.do_bits = 1;
+		dev->board.cnt_chans = 2;
+		dev->board.cnt_bits = 0;
+		dev->board.pwm_chans = 1;
+		dev->board.pwm_bits = 10;
+		break;
+	}
+
+	if (dev->board.model == VMK8061_MODEL) {
+		vmk80xx_read_eeprom(dev, IC3_VERSION);
+		printk(KERN_INFO "comedi#: vmk80xx: %s\n",
+		       dev->fw.ic3_vers);
+
+		if (vmk80xx_check_data_link(dev)) {
+			vmk80xx_read_eeprom(dev, IC6_VERSION);
+			printk(KERN_INFO "comedi#: vmk80xx: %s\n",
+			       dev->fw.ic6_vers);
+		} else
+			dbgcm("comedi#: vmk80xx: no conn. to CPU\n");
+	}
+
+	if (dev->board.model == VMK8055_MODEL)
+		vmk80xx_reset_device(dev);
+
+	dev->probed = 1;
+
+	printk(KERN_INFO "comedi#: vmk80xx: board #%d [%s] now attached\n",
+	       dev->count, dev->board.name);
+
+	mutex_unlock(&glb_mutex);
+
+	return 0;
+error:
+	mutex_unlock(&glb_mutex);
+
+	return -ENODEV;
+}
+
+static void vmk80xx_disconnect(struct usb_interface *intf)
+{
+	struct vmk80xx_usb *dev = usb_get_intfdata(intf);
+
+	dbgvm("vmk80xx: %s\n", __func__);
+
+	if (!dev)
+		return;
+
+	mutex_lock(&glb_mutex);
+	down(&dev->limit_sem);
+
+	dev->probed = 0;
+	usb_set_intfdata(dev->intf, NULL);
+
+	usb_kill_anchored_urbs(&dev->rx_anchor);
+	usb_kill_anchored_urbs(&dev->tx_anchor);
+
+	kfree(dev->usb_rx_buf);
+	kfree(dev->usb_tx_buf);
+
+	printk(KERN_INFO "comedi#: vmk80xx: board #%d [%s] now detached\n",
+	       dev->count, dev->board.name);
+
+	up(&dev->limit_sem);
+	mutex_unlock(&glb_mutex);
+}
+
+/* TODO: Add support for suspend, resume, pre_reset,
+ * post_reset and flush */
+static struct usb_driver vmk80xx_driver = {
+	.name       = "vmk80xx",
+	.probe      = vmk80xx_probe,
+	.disconnect = vmk80xx_disconnect,
+	.id_table   = vmk80xx_id_table
+};
+
+static struct comedi_driver driver_vmk80xx = {
+	.module      = THIS_MODULE,
+	.driver_name = "vmk80xx",
+	.attach      = vmk80xx_attach,
+	.detach      = vmk80xx_detach
+};
+
+static int __init vmk80xx_init(void)
+{
+	printk(KERN_INFO "vmk80xx: version 0.8.01 "
+	       "Manuel Gebele <forensixs@gmx.de>\n");
+	usb_register(&vmk80xx_driver);
+	return comedi_driver_register(&driver_vmk80xx);
+}
+
+static void __exit vmk80xx_exit(void)
+{
+	comedi_driver_unregister(&driver_vmk80xx);
+	usb_deregister(&vmk80xx_driver);
+}
+
+module_init(vmk80xx_init);
+module_exit(vmk80xx_exit);
diff --git a/drivers/staging/comedi/interrupt.h b/drivers/staging/comedi/interrupt.h
deleted file mode 100644
index d1f09892da2..00000000000
--- a/drivers/staging/comedi/interrupt.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
-    linux/interrupt.h compatibility header
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __COMPAT_LINUX_INTERRUPT_H_
-#define __COMPAT_LINUX_INTERRUPT_H_
-
-#include <linux/interrupt.h>
-
-#ifndef IRQF_DISABLED
-#define IRQF_DISABLED           SA_INTERRUPT
-#define IRQF_SAMPLE_RANDOM      SA_SAMPLE_RANDOM
-#define IRQF_SHARED             SA_SHIRQ
-#define IRQF_PROBE_SHARED       SA_PROBEIRQ
-#define IRQF_PERCPU             SA_PERCPU
-#ifdef SA_TRIGGER_MASK
-#define IRQF_TRIGGER_NONE       0
-#define IRQF_TRIGGER_LOW        SA_TRIGGER_LOW
-#define IRQF_TRIGGER_HIGH       SA_TRIGGER_HIGH
-#define IRQF_TRIGGER_FALLING    SA_TRIGGER_FALLING
-#define IRQF_TRIGGER_RISING     SA_TRIGGER_RISING
-#define IRQF_TRIGGER_MASK       SA_TRIGGER_MASK
-#else
-#define IRQF_TRIGGER_NONE       0
-#define IRQF_TRIGGER_LOW        0
-#define IRQF_TRIGGER_HIGH       0
-#define IRQF_TRIGGER_FALLING    0
-#define IRQF_TRIGGER_RISING     0
-#define IRQF_TRIGGER_MASK       0
-#endif
-#endif
-
-#define PT_REGS_ARG
-#define PT_REGS_CALL
-#define PT_REGS_NULL
-
-#endif
diff --git a/drivers/staging/comedi/kcomedilib/data.c b/drivers/staging/comedi/kcomedilib/data.c
index 9797e13e377..d808556460a 100644
--- a/drivers/staging/comedi/kcomedilib/data.c
+++ b/drivers/staging/comedi/kcomedilib/data.c
@@ -23,9 +23,10 @@
 
 #include "../comedi.h"
 #include "../comedilib.h"
-#include "../comedidev.h"	/* for comedi_udelay() */
+#include "../comedidev.h"
 
 #include <linux/string.h>
+#include <linux/delay.h>
 
 int comedi_data_write(void *dev, unsigned int subdev, unsigned int chan,
 	unsigned int range, unsigned int aref, unsigned int data)
@@ -83,7 +84,7 @@ int comedi_data_read_delayed(void *dev, unsigned int subdev,
 	if (retval < 0)
 		return retval;
 
-	comedi_udelay((nano_sec + 999) / 1000);
+	udelay((nano_sec + 999) / 1000);
 
 	return comedi_data_read(dev, subdev, chan, range, aref, data);
 }
diff --git a/drivers/staging/comedi/kcomedilib/kcomedilib_main.c b/drivers/staging/comedi/kcomedilib/kcomedilib_main.c
index a4fa9571c58..b39ea7c50b8 100644
--- a/drivers/staging/comedi/kcomedilib/kcomedilib_main.c
+++ b/drivers/staging/comedi/kcomedilib/kcomedilib_main.c
@@ -105,7 +105,7 @@ int comedi_loglevel(int newlevel)
 
 void comedi_perror(const char *message)
 {
-	rt_printk("%s: unknown error\n", message);
+	printk("%s: unknown error\n", message);
 }
 
 char *comedi_strerror(int err)
@@ -150,10 +150,6 @@ int comedi_command(void *d, struct comedi_cmd *cmd)
 
 	runflags = SRF_RUNNING;
 
-#ifdef CONFIG_COMEDI_RT
-	if (comedi_switch_to_rt(dev) == 0)
-		runflags |= SRF_RT;
-#endif
 	comedi_set_subdevice_runflags(s, ~0, runflags);
 
 	comedi_reset_async_buf(async);
@@ -208,7 +204,7 @@ int comedi_do_insn(void *d, struct comedi_insn *insn)
 				ret = -EINVAL;
 				break;
 			}
-			comedi_udelay(insn->data[0]);
+			udelay(insn->data[0]);
 			ret = 1;
 			break;
 		case INSN_INTTRIG:
@@ -217,19 +213,19 @@ int comedi_do_insn(void *d, struct comedi_insn *insn)
 				break;
 			}
 			if (insn->subdev >= dev->n_subdevices) {
-				rt_printk("%d not usable subdevice\n",
+				printk("%d not usable subdevice\n",
 					insn->subdev);
 				ret = -EINVAL;
 				break;
 			}
 			s = dev->subdevices + insn->subdev;
 			if (!s->async) {
-				rt_printk("no async\n");
+				printk("no async\n");
 				ret = -EINVAL;
 				break;
 			}
 			if (!s->async->inttrig) {
-				rt_printk("no inttrig\n");
+				printk("no inttrig\n");
 				ret = -EAGAIN;
 				break;
 			}
@@ -249,7 +245,7 @@ int comedi_do_insn(void *d, struct comedi_insn *insn)
 		s = dev->subdevices + insn->subdev;
 
 		if (s->type == COMEDI_SUBD_UNUSED) {
-			rt_printk("%d not useable subdevice\n", insn->subdev);
+			printk("%d not useable subdevice\n", insn->subdev);
 			ret = -EIO;
 			goto error;
 		}
@@ -258,7 +254,7 @@ int comedi_do_insn(void *d, struct comedi_insn *insn)
 
 		ret = check_chanlist(s, 1, &insn->chanspec);
 		if (ret < 0) {
-			rt_printk("bad chanspec\n");
+			printk("bad chanspec\n");
 			ret = -EINVAL;
 			goto error;
 		}
@@ -295,7 +291,7 @@ int comedi_do_insn(void *d, struct comedi_insn *insn)
 #if 0
 	/* XXX do we want this? -- abbotti #if'ed it out for now. */
 	if (ret != insn->n) {
-		rt_printk("BUG: result of insn != insn.n\n");
+		printk("BUG: result of insn != insn.n\n");
 		ret = -EINVAL;
 		goto error;
 	}
@@ -336,7 +332,7 @@ int comedi_lock(void *d, unsigned int subdevice)
 
 	s = dev->subdevices + subdevice;
 
-	comedi_spin_lock_irqsave(&s->spin_lock, flags);
+	spin_lock_irqsave(&s->spin_lock, flags);
 
 	if (s->busy) {
 		ret = -EBUSY;
@@ -348,7 +344,7 @@ int comedi_lock(void *d, unsigned int subdevice)
 		}
 	}
 
-	comedi_spin_unlock_irqrestore(&s->spin_lock, flags);
+	spin_unlock_irqrestore(&s->spin_lock, flags);
 
 	return ret;
 }
@@ -382,7 +378,7 @@ int comedi_unlock(void *d, unsigned int subdevice)
 
 	async = s->async;
 
-	comedi_spin_lock_irqsave(&s->spin_lock, flags);
+	spin_lock_irqsave(&s->spin_lock, flags);
 
 	if (s->busy) {
 		ret = -EBUSY;
@@ -400,7 +396,7 @@ int comedi_unlock(void *d, unsigned int subdevice)
 		ret = 0;
 	}
 
-	comedi_spin_unlock_irqrestore(&s->spin_lock, flags);
+	spin_unlock_irqrestore(&s->spin_lock, flags);
 
 	return ret;
 }
@@ -449,11 +445,6 @@ int comedi_cancel(void *d, unsigned int subdevice)
 	if (ret)
 		return ret;
 
-#ifdef CONFIG_COMEDI_RT
-	if (comedi_get_subdevice_runflags(s) & SRF_RT)
-		comedi_switch_to_non_rt(dev);
-
-#endif
 	comedi_set_subdevice_runflags(s, SRF_RUNNING | SRF_RT, 0);
 	s->async->inttrig = NULL;
 	s->busy = NULL;
diff --git a/drivers/staging/comedi/kcomedilib/ksyms.c b/drivers/staging/comedi/kcomedilib/ksyms.c
index 3db86dabf87..314765db51f 100644
--- a/drivers/staging/comedi/kcomedilib/ksyms.c
+++ b/drivers/staging/comedi/kcomedilib/ksyms.c
@@ -59,7 +59,7 @@ EXPORT_SYMBOL(comedi_close);
 EXPORT_SYMBOL(comedi_loglevel);
 EXPORT_SYMBOL(comedi_perror);
 EXPORT_SYMBOL(comedi_strerror);
-//EXPORT_SYMBOL(comedi_errno);
+/* EXPORT_SYMBOL(comedi_errno); */
 EXPORT_SYMBOL(comedi_fileno);
 
 /* device queries */
@@ -73,8 +73,10 @@ EXPORT_SYMBOL(comedi_get_subdevice_type);
 EXPORT_SYMBOL(comedi_find_subdevice_by_type);
 EXPORT_SYMBOL(comedi_get_subdevice_flags);
 EXPORT_SYMBOL(comedi_get_n_channels);
-//EXPORT_SYMBOL(comedi_range_is_chan_specific);
-//EXPORT_SYMBOL(comedi_maxdata_is_chan_specific);
+/*
+* EXPORT_SYMBOL(comedi_range_is_chan_specific);
+* EXPORT_SYMBOL(comedi_maxdata_is_chan_specific);
+*/
 
 /* channel queries */
 EXPORT_SYMBOL(comedi_get_maxdata);
@@ -82,25 +84,29 @@ EXPORT_SYMBOL(comedi_get_maxdata);
 EXPORT_SYMBOL(comedi_get_rangetype);
 #endif
 EXPORT_SYMBOL(comedi_get_n_ranges);
-//EXPORT_SYMBOL(comedi_find_range);
+/* EXPORT_SYMBOL(comedi_find_range); */
 
 /* buffer queries */
 EXPORT_SYMBOL(comedi_get_buffer_size);
-//EXPORT_SYMBOL(comedi_get_max_buffer_size);
-//EXPORT_SYMBOL(comedi_set_buffer_size);
+/*
+* EXPORT_SYMBOL(comedi_get_max_buffer_size);
+* EXPORT_SYMBOL(comedi_set_buffer_size);
+*/
 EXPORT_SYMBOL(comedi_get_buffer_contents);
 EXPORT_SYMBOL(comedi_get_buffer_offset);
 
 /* low-level stuff */
-//EXPORT_SYMBOL(comedi_trigger);
-//EXPORT_SYMBOL(comedi_do_insnlist);
+/*
+* EXPORT_SYMBOL(comedi_trigger); EXPORT_SYMBOL(comedi_do_insnlist);
+*/
 EXPORT_SYMBOL(comedi_do_insn);
 EXPORT_SYMBOL(comedi_lock);
 EXPORT_SYMBOL(comedi_unlock);
 
 /* physical units */
-//EXPORT_SYMBOL(comedi_to_phys);
-//EXPORT_SYMBOL(comedi_from_phys);
+/*
+* EXPORT_SYMBOL(comedi_to_phys); EXPORT_SYMBOL(comedi_from_phys);
+*/
 
 /* synchronous stuff */
 EXPORT_SYMBOL(comedi_data_read);
@@ -113,13 +119,16 @@ EXPORT_SYMBOL(comedi_dio_write);
 EXPORT_SYMBOL(comedi_dio_bitfield);
 
 /* slowly varying stuff */
-//EXPORT_SYMBOL(comedi_sv_init);
-//EXPORT_SYMBOL(comedi_sv_update);
-//EXPORT_SYMBOL(comedi_sv_measure);
+/*
+* EXPORT_SYMBOL(comedi_sv_init); EXPORT_SYMBOL(comedi_sv_update);
+* EXPORT_SYMBOL(comedi_sv_measure);
+*/
 
 /* commands */
-//EXPORT_SYMBOL(comedi_get_cmd_src_mask);
-//EXPORT_SYMBOL(comedi_get_cmd_generic_timed);
+/*
+* EXPORT_SYMBOL(comedi_get_cmd_src_mask);
+* EXPORT_SYMBOL(comedi_get_cmd_generic_timed);
+*/
 EXPORT_SYMBOL(comedi_cancel);
 EXPORT_SYMBOL(comedi_command);
 EXPORT_SYMBOL(comedi_command_test);
@@ -129,12 +138,14 @@ EXPORT_SYMBOL(comedi_poll);
 EXPORT_SYMBOL(comedi_mark_buffer_read);
 EXPORT_SYMBOL(comedi_mark_buffer_written);
 
-//EXPORT_SYMBOL(comedi_get_range);
+/* EXPORT_SYMBOL(comedi_get_range); */
 EXPORT_SYMBOL(comedi_get_len_chanlist);
 
 /* deprecated */
-//EXPORT_SYMBOL(comedi_get_timer);
-//EXPORT_SYMBOL(comedi_timed_1chan);
+/*
+* EXPORT_SYMBOL(comedi_get_timer);
+* EXPORT_SYMBOL(comedi_timed_1chan);
+*/
 
 /* alpha */
-//EXPORT_SYMBOL(comedi_set_global_oor_behavior);
+/* EXPORT_SYMBOL(comedi_set_global_oor_behavior); */
diff --git a/drivers/staging/comedi/range.c b/drivers/staging/comedi/range.c
index ac200d929f3..445909e6f33 100644
--- a/drivers/staging/comedi/range.c
+++ b/drivers/staging/comedi/range.c
@@ -32,7 +32,7 @@ const struct comedi_lrange range_unipolar5 = { 1, {UNI_RANGE(5)} };
 const struct comedi_lrange range_unknown = { 1, {{0, 1000000, UNIT_none}} };
 
 /*
-   	COMEDI_RANGEINFO
+	COMEDI_RANGEINFO
 	range information ioctl
 
 	arg:
@@ -130,8 +130,7 @@ int check_chanlist(struct comedi_subdevice *s, int n, unsigned int *chanlist)
 			if (CR_CHAN(chanlist[i]) >= s->n_chan ||
 				CR_RANGE(chanlist[i]) >= s->range_table->length
 				|| aref_invalid(s, chanlist[i])) {
-				rt_printk
-					("bad chanlist[%d]=0x%08x n_chan=%d range length=%d\n",
+				printk("bad chanlist[%d]=0x%08x n_chan=%d range length=%d\n",
 					i, chanlist[i], s->n_chan,
 					s->range_table->length);
 #if 0
@@ -147,13 +146,13 @@ int check_chanlist(struct comedi_subdevice *s, int n, unsigned int *chanlist)
 				CR_RANGE(chanlist[i]) >=
 				s->range_table_list[chan]->length
 				|| aref_invalid(s, chanlist[i])) {
-				rt_printk("bad chanlist[%d]=0x%08x\n", i,
+				printk("bad chanlist[%d]=0x%08x\n", i,
 					chanlist[i]);
 				return -EINVAL;
 			}
 		}
 	} else {
-		rt_printk("comedi: (bug) no range type list!\n");
+		printk("comedi: (bug) no range type list!\n");
 		return -EINVAL;
 	}
 	return 0;
diff --git a/drivers/staging/comedi/rt.c b/drivers/staging/comedi/rt.c
deleted file mode 100644
index e9f5777595a..00000000000
--- a/drivers/staging/comedi/rt.c
+++ /dev/null
@@ -1,411 +0,0 @@
-/*
-    comedi/rt.c
-    comedi kernel module
-
-    COMEDI - Linux Control and Measurement Device Interface
-    Copyright (C) 1997-2000 David A. Schleef <ds@schleef.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#undef DEBUG
-
-#define __NO_VERSION__
-#include <linux/comedidev.h>
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/fcntl.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <asm/io.h>
-
-#include "rt_pend_tq.h"
-
-#ifdef CONFIG_COMEDI_RTAI
-#include <rtai.h>
-#endif
-
-#ifdef CONFIG_COMEDI_FUSION
-#include <nucleus/asm/hal.h>
-#endif
-
-#ifdef CONFIG_COMEDI_RTL
-#include <rtl_core.h>
-#include <rtl_sync.h>
-#endif
-
-struct comedi_irq_struct {
-	int rt;
-	int irq;
-	 irqreturn_t(*handler) (int irq, void *dev_id PT_REGS_ARG);
-	unsigned long flags;
-	const char *device;
-	struct comedi_device *dev_id;
-};
-
-static int comedi_rt_get_irq(struct comedi_irq_struct *it);
-static int comedi_rt_release_irq(struct comedi_irq_struct *it);
-
-static struct comedi_irq_struct *comedi_irqs[NR_IRQS];
-
-int comedi_request_irq(unsigned irq, irqreturn_t(*handler) (int,
-		void *PT_REGS_ARG), unsigned long flags, const char *device,
-	struct comedi_device *dev_id)
-{
-	struct comedi_irq_struct *it;
-	int ret;
-	/* null shared interrupt flag, since rt interrupt handlers do not
-	 * support it, and this version of comedi_request_irq() is only
-	 * called for kernels with rt support */
-	unsigned long unshared_flags = flags & ~IRQF_SHARED;
-
-	ret = request_irq(irq, handler, unshared_flags, device, dev_id);
-	if (ret < 0) {
-		/*  we failed, so fall back on allowing shared interrupt (which we won't ever make RT) */
-		if (flags & IRQF_SHARED) {
-			rt_printk
-				("comedi: cannot get unshared interrupt, will not use RT interrupts.\n");
-			ret = request_irq(irq, handler, flags, device, dev_id);
-		}
-		if (ret < 0)
-			return ret;
-
-	} else {
-		it = kzalloc(sizeof(struct comedi_irq_struct), GFP_KERNEL);
-		if (!it)
-			return -ENOMEM;
-
-		it->handler = handler;
-		it->irq = irq;
-		it->dev_id = dev_id;
-		it->device = device;
-		it->flags = unshared_flags;
-		comedi_irqs[irq] = it;
-	}
-	return 0;
-}
-
-void comedi_free_irq(unsigned int irq, struct comedi_device *dev_id)
-{
-	struct comedi_irq_struct *it;
-
-	free_irq(irq, dev_id);
-
-	it = comedi_irqs[irq];
-	if (it == NULL)
-		return;
-
-	if (it->rt) {
-		printk("real-time IRQ allocated at board removal (ignore)\n");
-		comedi_rt_release_irq(it);
-	}
-
-	kfree(it);
-	comedi_irqs[irq] = NULL;
-}
-
-int comedi_switch_to_rt(struct comedi_device *dev)
-{
-	struct comedi_irq_struct *it;
-	unsigned long flags;
-
-	it = comedi_irqs[dev->irq];
-	/* drivers might not be using an interrupt for commands,
-	   or we might not have been able to get an unshared irq */
-	if (it == NULL)
-		return -1;
-
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
-
-	if (!dev->rt)
-		comedi_rt_get_irq(it);
-
-	dev->rt++;
-	it->rt = 1;
-
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
-
-	return 0;
-}
-
-void comedi_switch_to_non_rt(struct comedi_device *dev)
-{
-	struct comedi_irq_struct *it;
-	unsigned long flags;
-
-	it = comedi_irqs[dev->irq];
-	if (it == NULL)
-		return;
-
-	comedi_spin_lock_irqsave(&dev->spinlock, flags);
-
-	dev->rt--;
-	if (!dev->rt)
-		comedi_rt_release_irq(it);
-
-	it->rt = 0;
-
-	comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
-}
-
-void wake_up_int_handler(int arg1, void *arg2)
-{
-	wake_up_interruptible((wait_queue_head_t *) arg2);
-}
-
-void comedi_rt_pend_wakeup(wait_queue_head_t *q)
-{
-	rt_pend_call(wake_up_int_handler, 0, q);
-}
-
-/* RTAI section */
-#ifdef CONFIG_COMEDI_RTAI
-
-#ifndef HAVE_RT_REQUEST_IRQ_WITH_ARG
-#define DECLARE_VOID_IRQ(irq) \
-static void handle_void_irq_ ## irq (void){ handle_void_irq(irq); }
-
-static void handle_void_irq(int irq)
-{
-	struct comedi_irq_struct *it;
-
-	it = comedi_irqs[irq];
-	if (it == NULL) {
-		rt_printk("comedi: null irq struct?\n");
-		return;
-	}
-	it->handler(irq, it->dev_id PT_REGS_NULL);
-	rt_enable_irq(irq);	/* needed by rtai-adeos, seems like it shouldn't hurt earlier versions */
-}
-
-DECLARE_VOID_IRQ(0);
-DECLARE_VOID_IRQ(1);
-DECLARE_VOID_IRQ(2);
-DECLARE_VOID_IRQ(3);
-DECLARE_VOID_IRQ(4);
-DECLARE_VOID_IRQ(5);
-DECLARE_VOID_IRQ(6);
-DECLARE_VOID_IRQ(7);
-DECLARE_VOID_IRQ(8);
-DECLARE_VOID_IRQ(9);
-DECLARE_VOID_IRQ(10);
-DECLARE_VOID_IRQ(11);
-DECLARE_VOID_IRQ(12);
-DECLARE_VOID_IRQ(13);
-DECLARE_VOID_IRQ(14);
-DECLARE_VOID_IRQ(15);
-DECLARE_VOID_IRQ(16);
-DECLARE_VOID_IRQ(17);
-DECLARE_VOID_IRQ(18);
-DECLARE_VOID_IRQ(19);
-DECLARE_VOID_IRQ(20);
-DECLARE_VOID_IRQ(21);
-DECLARE_VOID_IRQ(22);
-DECLARE_VOID_IRQ(23);
-
-static void handle_void_irq_ptrs[] = {
-	handle_void_irq_0,
-	handle_void_irq_1,
-	handle_void_irq_2,
-	handle_void_irq_3,
-	handle_void_irq_4,
-	handle_void_irq_5,
-	handle_void_irq_6,
-	handle_void_irq_7,
-	handle_void_irq_8,
-	handle_void_irq_9,
-	handle_void_irq_10,
-	handle_void_irq_11,
-	handle_void_irq_12,
-	handle_void_irq_13,
-	handle_void_irq_14,
-	handle_void_irq_15,
-	handle_void_irq_16,
-	handle_void_irq_17,
-	handle_void_irq_18,
-	handle_void_irq_19,
-	handle_void_irq_20,
-	handle_void_irq_21,
-	handle_void_irq_22,
-	handle_void_irq_23,
-};
-
-static int comedi_rt_get_irq(struct comedi_irq_struct *it)
-{
-	rt_request_global_irq(it->irq, handle_void_irq_ptrs[it->irq]);
-	rt_startup_irq(it->irq);
-
-	return 0;
-}
-
-static int comedi_rt_release_irq(struct comedi_irq_struct *it)
-{
-	rt_shutdown_irq(it->irq);
-	rt_free_global_irq(it->irq);
-	return 0;
-}
-#else
-
-static int comedi_rt_get_irq(struct comedi_irq_struct *it)
-{
-	int ret;
-
-	ret = rt_request_global_irq_arg(it->irq, it->handler, it->flags,
-		it->device, it->dev_id);
-	if (ret < 0) {
-		rt_printk("rt_request_global_irq_arg() returned %d\n", ret);
-		return ret;
-	}
-	rt_startup_irq(it->irq);
-
-	return 0;
-}
-
-static int comedi_rt_release_irq(struct comedi_irq_struct *it)
-{
-	rt_shutdown_irq(it->irq);
-	rt_free_global_irq(it->irq);
-	return 0;
-}
-#endif
-
-void comedi_rt_init(void)
-{
-	rt_mount_rtai();
-	rt_pend_tq_init();
-}
-
-void comedi_rt_cleanup(void)
-{
-	rt_umount_rtai();
-	rt_pend_tq_cleanup();
-}
-
-#endif
-
-/* Fusion section */
-#ifdef CONFIG_COMEDI_FUSION
-
-static void fusion_handle_irq(unsigned int irq, void *cookie)
-{
-	struct comedi_irq_struct *it = cookie;
-
-	it->handler(irq, it->dev_id PT_REGS_NULL);
-	rthal_irq_enable(irq);
-}
-
-static int comedi_rt_get_irq(struct comedi_irq_struct *it)
-{
-	rthal_irq_request(it->irq, fusion_handle_irq, it);
-	rthal_irq_enable(it->irq);
-	return 0;
-}
-
-static int comedi_rt_release_irq(struct comedi_irq_struct *it)
-{
-	rthal_irq_disable(it->irq);
-	rthal_irq_release(it->irq);
-	return 0;
-}
-
-void comedi_rt_init(void)
-{
-	rt_pend_tq_init();
-}
-
-void comedi_rt_cleanup(void)
-{
-	rt_pend_tq_cleanup();
-}
-
-#endif /*CONFIG_COMEDI_FUSION */
-
-/* RTLinux section */
-#ifdef CONFIG_COMEDI_RTL
-
-static unsigned int handle_rtl_irq(unsigned int irq PT_REGS_ARG)
-{
-	struct comedi_irq_struct *it;
-
-	it = comedi_irqs[irq];
-	if (it == NULL)
-		return 0;
-	it->handler(irq, it->dev_id PT_REGS_NULL);
-	rtl_hard_enable_irq(irq);
-	return 0;
-}
-
-static int comedi_rt_get_irq(struct comedi_irq_struct *it)
-{
-	rtl_request_global_irq(it->irq, handle_rtl_irq);
-	return 0;
-}
-
-static int comedi_rt_release_irq(struct comedi_irq_struct *it)
-{
-	rtl_free_global_irq(it->irq);
-	return 0;
-}
-
-void comedi_rt_init(void)
-{
-	rt_pend_tq_init();
-}
-
-void comedi_rt_cleanup(void)
-{
-	rt_pend_tq_cleanup();
-}
-
-#endif
-
-#ifdef CONFIG_COMEDI_PIRQ
-static int comedi_rt_get_irq(struct comedi_irq_struct *it)
-{
-	int ret;
-
-	free_irq(it->irq, it->dev_id);
-	ret = request_irq(it->irq, it->handler, it->flags | SA_PRIORITY,
-		it->device, it->dev_id);
-
-	return ret;
-}
-
-static int comedi_rt_release_irq(struct comedi_irq_struct *it)
-{
-	int ret;
-
-	free_irq(it->irq, it->dev_id);
-	ret = request_irq(it->irq, it->handler, it->flags,
-		it->device, it->dev_id);
-
-	return ret;
-}
-
-void comedi_rt_init(void)
-{
-	/* rt_pend_tq_init(); */
-}
-
-void comedi_rt_cleanup(void)
-{
-	/* rt_pend_tq_cleanup(); */
-}
-#endif
diff --git a/drivers/staging/comedi/rt_pend_tq.c b/drivers/staging/comedi/rt_pend_tq.c
deleted file mode 100644
index f9dfd9d40cd..00000000000
--- a/drivers/staging/comedi/rt_pend_tq.c
+++ /dev/null
@@ -1,113 +0,0 @@
-#define __NO_VERSION__
-/* rt_pend_tq.c */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include "comedidev.h"	/* for rt spinlocks */
-#include "rt_pend_tq.h"
-#ifdef CONFIG_COMEDI_RTAI
-#include <rtai.h>
-#endif
-#ifdef CONFIG_COMEDI_FUSION
-#include <nucleus/asm/hal.h>
-#endif
-#ifdef CONFIG_COMEDI_RTL
-#include <rtl_core.h>
-#endif
-
-#ifdef standalone
-#include <linux/module.h>
-#define rt_pend_tq_init init_module
-#define rt_pend_tq_cleanup cleanup_module
-#endif
-
-volatile static struct rt_pend_tq rt_pend_tq[RT_PEND_TQ_SIZE];
-volatile static struct rt_pend_tq *volatile rt_pend_head = rt_pend_tq,
-	*volatile rt_pend_tail = rt_pend_tq;
-int rt_pend_tq_irq = 0;
-DEFINE_SPINLOCK(rt_pend_tq_lock);
-
-/* WARNING: following code not checked against race conditions yet. */
-#define INC_CIRCULAR_PTR(ptr,begin,size) do {if(++(ptr)>=(begin)+(size)) (ptr)=(begin); } while(0)
-#define DEC_CIRCULAR_PTR(ptr,begin,size) do {if(--(ptr)<(begin)) (ptr)=(begin)+(size)-1; } while(0)
-
-int rt_pend_call(void (*func) (int arg1, void *arg2), int arg1, void *arg2)
-{
-	unsigned long flags;
-
-	if (func == NULL)
-		return -EINVAL;
-	if (rt_pend_tq_irq <= 0)
-		return -ENODEV;
-	comedi_spin_lock_irqsave(&rt_pend_tq_lock, flags);
-	INC_CIRCULAR_PTR(rt_pend_head, rt_pend_tq, RT_PEND_TQ_SIZE);
-	if (rt_pend_head == rt_pend_tail) {
-		/* overflow, we just refuse to take this request */
-		DEC_CIRCULAR_PTR(rt_pend_head, rt_pend_tq, RT_PEND_TQ_SIZE);
-		comedi_spin_unlock_irqrestore(&rt_pend_tq_lock, flags);
-		return -EAGAIN;
-	}
-	rt_pend_head->func = func;
-	rt_pend_head->arg1 = arg1;
-	rt_pend_head->arg2 = arg2;
-	comedi_spin_unlock_irqrestore(&rt_pend_tq_lock, flags);
-#ifdef CONFIG_COMEDI_RTAI
-	rt_pend_linux_srq(rt_pend_tq_irq);
-#endif
-#ifdef CONFIG_COMEDI_FUSION
-	rthal_apc_schedule(rt_pend_tq_irq);
-#endif
-#ifdef CONFIG_COMEDI_RTL
-	rtl_global_pend_irq(rt_pend_tq_irq);
-
-#endif
-	return 0;
-}
-
-#ifdef CONFIG_COMEDI_RTAI
-void rt_pend_irq_handler(void)
-#elif defined(CONFIG_COMEDI_FUSION)
-void rt_pend_irq_handler(void *cookie)
-#elif defined(CONFIG_COMEDI_RTL)
-void rt_pend_irq_handler(int irq, void *dev PT_REGS_ARG)
-#endif
-{
-	while (rt_pend_head != rt_pend_tail) {
-		INC_CIRCULAR_PTR(rt_pend_tail, rt_pend_tq, RT_PEND_TQ_SIZE);
-		rt_pend_tail->func(rt_pend_tail->arg1, rt_pend_tail->arg2);
-	}
-}
-
-int rt_pend_tq_init(void)
-{
-	rt_pend_head = rt_pend_tail = rt_pend_tq;
-#ifdef CONFIG_COMEDI_RTAI
-	rt_pend_tq_irq = rt_request_srq(0, rt_pend_irq_handler, NULL);
-#endif
-#ifdef CONFIG_COMEDI_FUSION
-	rt_pend_tq_irq =
-		rthal_apc_alloc("comedi APC", rt_pend_irq_handler, NULL);
-#endif
-#ifdef CONFIG_COMEDI_RTL
-	rt_pend_tq_irq = rtl_get_soft_irq(rt_pend_irq_handler, "rt_pend_irq");
-#endif
-	if (rt_pend_tq_irq > 0)
-		printk("rt_pend_tq: RT bottom half scheduler initialized OK\n");
-	else
-		printk("rt_pend_tq: rtl_get_soft_irq failed\n");
-	return 0;
-}
-
-void rt_pend_tq_cleanup(void)
-{
-	printk("rt_pend_tq: unloading\n");
-#ifdef CONFIG_COMEDI_RTAI
-	rt_free_srq(rt_pend_tq_irq);
-#endif
-#ifdef CONFIG_COMEDI_FUSION
-	rthal_apc_free(rt_pend_tq_irq);
-#endif
-#ifdef CONFIG_COMEDI_RTL
-	free_irq(rt_pend_tq_irq, NULL);
-#endif
-}
diff --git a/drivers/staging/comedi/rt_pend_tq.h b/drivers/staging/comedi/rt_pend_tq.h
deleted file mode 100644
index 01ed71bf409..00000000000
--- a/drivers/staging/comedi/rt_pend_tq.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#define RT_PEND_TQ_SIZE 16
-struct rt_pend_tq {
-	void (*func) (int arg1, void *arg2);
-	int arg1;
-	void *arg2;
-};
-extern int rt_pend_call(void (*func) (int arg1, void *arg2), int arg1,
-	void *arg2);
-extern int rt_pend_tq_init(void);
-extern void rt_pend_tq_cleanup(void);
diff --git a/drivers/staging/cpc-usb/Kconfig b/drivers/staging/cpc-usb/Kconfig
new file mode 100644
index 00000000000..2be0bc9c39d
--- /dev/null
+++ b/drivers/staging/cpc-usb/Kconfig
@@ -0,0 +1,4 @@
+config USB_CPC
+	tristate "CPC CAN USB driver"
+	depends on USB && PROC_FS
+	default n
diff --git a/drivers/staging/cpc-usb/Makefile b/drivers/staging/cpc-usb/Makefile
new file mode 100644
index 00000000000..3f83170a8fa
--- /dev/null
+++ b/drivers/staging/cpc-usb/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_USB_CPC)	+= cpc-usb.o
+
+cpc-usb-y := cpc-usb_drv.o sja2m16c_2.o
diff --git a/drivers/staging/serqt_usb/TODO b/drivers/staging/cpc-usb/TODO
index 34ecca8992d..000e8bbc618 100644
--- a/drivers/staging/serqt_usb/TODO
+++ b/drivers/staging/cpc-usb/TODO
@@ -2,7 +2,8 @@ Things to do for this driver to get merged into the main portion of the
 kernel:
 	- checkpatch cleanups
 	- sparse clean
-	- port to the usb-serial layer instead of doing it all on its
-	  own.
+	- remove proc code
+	- tie into CAN socket interfaces if possible
+	- figure out sane userspace api
 
 Send patches to Greg Kroah-Hartman <greg@kroah.com>
diff --git a/drivers/staging/cpc-usb/cpc-usb_drv.c b/drivers/staging/cpc-usb/cpc-usb_drv.c
new file mode 100644
index 00000000000..9bf3f98c682
--- /dev/null
+++ b/drivers/staging/cpc-usb/cpc-usb_drv.c
@@ -0,0 +1,1185 @@
+/*
+ * CPC-USB CAN Interface Kernel Driver
+ *
+ * Copyright (C) 2004-2009 EMS Dr. Thomas Wuensche
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/module.h>
+#include <linux/poll.h>
+#include <linux/smp_lock.h>
+#include <linux/completion.h>
+#include <asm/uaccess.h>
+#include <linux/usb.h>
+
+#include <linux/version.h>
+
+#include <linux/proc_fs.h>
+
+#include "cpc.h"
+
+#include "cpc_int.h"
+#include "cpcusb.h"
+
+#include "sja2m16c.h"
+
+/* Version Information */
+#define DRIVER_AUTHOR  "Sebastian Haas <haas@ems-wuensche.com>"
+#define DRIVER_DESC    "CPC-USB Driver for Linux Kernel 2.6"
+#define DRIVER_VERSION CPC_DRIVER_VERSION
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL v2");
+
+/* Define these values to match your devices */
+#define USB_CPCUSB_VENDOR_ID	0x12D6
+
+#define USB_CPCUSB_M16C_PRODUCT_ID    0x0888
+#define USB_CPCUSB_LPC2119_PRODUCT_ID 0x0444
+
+#define CPC_USB_PROC_DIR     CPC_PROC_DIR "cpc-usb"
+
+static struct proc_dir_entry *procDir;
+static struct proc_dir_entry *procEntry;
+
+/* Module parameters */
+static int debug;
+module_param(debug, int, S_IRUGO);
+
+/* table of devices that work with this driver */
+static struct usb_device_id cpcusb_table[] = {
+	{USB_DEVICE(USB_CPCUSB_VENDOR_ID, USB_CPCUSB_M16C_PRODUCT_ID)},
+	{USB_DEVICE(USB_CPCUSB_VENDOR_ID, USB_CPCUSB_LPC2119_PRODUCT_ID)},
+	{}			/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, cpcusb_table);
+
+/* use to prevent kernel panic if driver is unloaded
+ * while a programm has still open the device
+ */
+DECLARE_WAIT_QUEUE_HEAD(rmmodWq);
+atomic_t useCount;
+
+static CPC_USB_T *CPCUSB_Table[CPC_USB_CARD_CNT] = { 0 };
+static unsigned int CPCUsbCnt;
+
+/* prevent races between open() and disconnect() */
+static DECLARE_MUTEX(disconnect_sem);
+
+/* local function prototypes */
+static ssize_t cpcusb_read(struct file *file, char *buffer, size_t count,
+			   loff_t *ppos);
+static ssize_t cpcusb_write(struct file *file, const char *buffer,
+			    size_t count, loff_t *ppos);
+static unsigned int cpcusb_poll(struct file *file, poll_table * wait);
+static int cpcusb_open(struct inode *inode, struct file *file);
+static int cpcusb_release(struct inode *inode, struct file *file);
+
+static int cpcusb_probe(struct usb_interface *interface,
+			const struct usb_device_id *id);
+static void cpcusb_disconnect(struct usb_interface *interface);
+
+static void cpcusb_read_bulk_callback(struct urb *urb);
+static void cpcusb_write_bulk_callback(struct urb *urb);
+static void cpcusb_read_interrupt_callback(struct urb *urb);
+
+static int cpcusb_setup_intrep(CPC_USB_T *card);
+
+static struct file_operations cpcusb_fops = {
+	/*
+	 * The owner field is part of the module-locking
+	 * mechanism. The idea is that the kernel knows
+	 * which module to increment the use-counter of
+	 * BEFORE it calls the device's open() function.
+	 * This also means that the kernel can decrement
+	 * the use-counter again before calling release()
+	 * or should the open() function fail.
+	 */
+	.owner = THIS_MODULE,
+
+	.read = cpcusb_read,
+	.write = cpcusb_write,
+	.poll = cpcusb_poll,
+	.open = cpcusb_open,
+	.release = cpcusb_release,
+};
+
+/*
+ * usb class driver info in order to get a minor number from the usb core,
+ * and to have the device registered with devfs and the driver core
+ */
+static struct usb_class_driver cpcusb_class = {
+	.name = "usb/cpc_usb%d",
+	.fops = &cpcusb_fops,
+	.minor_base = CPC_USB_BASE_MNR,
+};
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver cpcusb_driver = {
+	.name = "cpc-usb",
+	.probe = cpcusb_probe,
+	.disconnect = cpcusb_disconnect,
+	.id_table = cpcusb_table,
+};
+
+static int cpcusb_create_info_output(char *buf)
+{
+	int i = 0, j;
+
+	for (j = 0; j < CPC_USB_CARD_CNT; j++) {
+		if (CPCUSB_Table[j]) {
+			CPC_USB_T *card = CPCUSB_Table[j];
+			CPC_CHAN_T *chan = card->chan;
+
+			/* MINOR CHANNELNO BUSNO SLOTNO */
+			i += sprintf(&buf[i], "%d %s\n", chan->minor,
+				     card->serialNumber);
+		}
+	}
+
+	return i;
+}
+
+static int cpcusb_proc_read_info(char *page, char **start, off_t off,
+				 int count, int *eof, void *data)
+{
+	int len = cpcusb_create_info_output(page);
+
+	if (len <= off + count)
+		*eof = 1;
+	*start = page + off;
+	len -= off;
+	if (len > count)
+		len = count;
+	if (len < 0)
+		len = 0;
+
+	return len;
+}
+
+/*
+ * Remove CPC-USB and cleanup
+ */
+static inline void cpcusb_delete(CPC_USB_T *card)
+{
+	if (card) {
+		if (card->chan) {
+			if (card->chan->buf)
+				vfree(card->chan->buf);
+
+			if (card->chan->CPCWait_q)
+				kfree(card->chan->CPCWait_q);
+
+			kfree(card->chan);
+		}
+
+		CPCUSB_Table[card->idx] = NULL;
+		kfree(card);
+	}
+}
+
+/*
+ * setup the interrupt IN endpoint of a specific CPC-USB device
+ */
+static int cpcusb_setup_intrep(CPC_USB_T *card)
+{
+	int retval = 0;
+	struct usb_endpoint_descriptor *ep;
+
+	ep = &card->interface->altsetting[0].endpoint[card->num_intr_in].desc;
+
+	card->intr_in_buffer[0] = 0;
+	card->free_slots = 15;	/* initial size */
+
+	/* setup the urb */
+	usb_fill_int_urb(card->intr_in_urb, card->udev,
+			 usb_rcvintpipe(card->udev, card->num_intr_in),
+			 card->intr_in_buffer,
+			 sizeof(card->intr_in_buffer),
+			 cpcusb_read_interrupt_callback,
+			 card,
+			 ep->bInterval);
+
+	card->intr_in_urb->status = 0;	/* needed! */
+
+	/* submit the urb */
+	retval = usb_submit_urb(card->intr_in_urb, GFP_KERNEL);
+
+	if (retval)
+		err("%s - failed submitting intr urb, error %d", __func__,
+		    retval);
+
+	return retval;
+}
+
+static int cpcusb_open(struct inode *inode, struct file *file)
+{
+	CPC_USB_T *card = NULL;
+	struct usb_interface *interface;
+	int subminor;
+	int j, retval = 0;
+
+	subminor = iminor(inode);
+
+	/* prevent disconnects */
+	down(&disconnect_sem);
+
+	interface = usb_find_interface(&cpcusb_driver, subminor);
+	if (!interface) {
+		err("%s - error, can't find device for minor %d",
+				__func__, subminor);
+		retval = CPC_ERR_NO_INTERFACE_PRESENT;
+		goto exit_no_device;
+	}
+
+	card = usb_get_intfdata(interface);
+	if (!card) {
+		retval = CPC_ERR_NO_INTERFACE_PRESENT;
+		goto exit_no_device;
+	}
+
+	/* lock this device */
+	down(&card->sem);
+
+	/* increment our usage count for the driver */
+	if (card->open) {
+		dbg("device already opened");
+		retval = CPC_ERR_CHANNEL_ALREADY_OPEN;
+		goto exit_on_error;
+	}
+
+	/* save our object in the file's private structure */
+	file->private_data = card;
+	for (j = 0; j < CPC_USB_URB_CNT; j++) {
+		usb_fill_bulk_urb(card->urbs[j].urb, card->udev,
+				  usb_rcvbulkpipe(card->udev, card->num_bulk_in),
+				  card->urbs[j].buffer, card->urbs[j].size,
+				  cpcusb_read_bulk_callback, card);
+
+		retval = usb_submit_urb(card->urbs[j].urb, GFP_KERNEL);
+
+		if (retval) {
+			err("%s - failed submitting read urb, error %d",
+			    __func__, retval);
+			retval = CPC_ERR_TRANSMISSION_FAILED;
+			goto exit_on_error;
+		}
+	}
+
+	info("%s - %d URB's submitted", __func__, j);
+
+	ResetBuffer(card->chan);
+
+	cpcusb_setup_intrep(card);
+	card->open = 1;
+
+	atomic_inc(&useCount);
+
+exit_on_error:
+	/* unlock this device */
+	up(&card->sem);
+
+exit_no_device:
+	up(&disconnect_sem);
+
+	return retval;
+}
+
+static unsigned int cpcusb_poll(struct file *file, poll_table * wait)
+{
+	CPC_USB_T *card = (CPC_USB_T *) file->private_data;
+	unsigned int retval = 0;
+
+	if (!card) {
+		err("%s - device object lost", __func__);
+		return -EIO;
+	}
+
+	poll_wait(file, card->chan->CPCWait_q, wait);
+
+	if (IsBufferNotEmpty(card->chan) || !(card->present))
+		retval |= (POLLIN | POLLRDNORM);
+
+	if (card->free_slots)
+		retval |= (POLLOUT | POLLWRNORM);
+
+	return retval;
+}
+
+static int cpcusb_release(struct inode *inode, struct file *file)
+{
+	CPC_USB_T *card = (CPC_USB_T *) file->private_data;
+	int j, retval = 0;
+
+	if (card == NULL) {
+		dbg("%s - object is NULL", __func__);
+		return CPC_ERR_NO_INTERFACE_PRESENT;
+	}
+
+	/* lock our device */
+	down(&card->sem);
+
+	if (!card->open) {
+		dbg("%s - device not opened", __func__);
+		retval = CPC_ERR_NO_INTERFACE_PRESENT;
+		goto exit_not_opened;
+	}
+
+	/* if device wasn't unplugged kill all urbs */
+	if (card->present) {
+		/* kill read urbs */
+		for (j = 0; j < CPC_USB_URB_CNT; j++) {
+			usb_kill_urb(card->urbs[j].urb);
+		}
+
+		/* kill irq urb */
+		usb_kill_urb(card->intr_in_urb);
+
+		/* kill write urbs */
+		for (j = 0; j < CPC_USB_URB_CNT; j++) {
+			if (atomic_read(&card->wrUrbs[j].busy)) {
+				usb_kill_urb(card->wrUrbs[j].urb);
+				wait_for_completion(&card->wrUrbs[j].finished);
+			}
+		}
+	}
+
+	atomic_dec(&useCount);
+
+	/* last process detached */
+	if (atomic_read(&useCount) == 0) {
+		wake_up(&rmmodWq);
+	}
+
+	if (!card->present && card->open) {
+		/* the device was unplugged before the file was released */
+		up(&card->sem);
+		cpcusb_delete(card);
+		return 0;
+	}
+
+	card->open = 0;
+
+exit_not_opened:
+	up(&card->sem);
+
+	return 0;
+}
+
+static ssize_t cpcusb_read(struct file *file, char *buffer, size_t count,
+			   loff_t *ppos)
+{
+	CPC_USB_T *card = (CPC_USB_T *) file->private_data;
+	CPC_CHAN_T *chan;
+	int retval = 0;
+
+	if (count < sizeof(CPC_MSG_T))
+		return CPC_ERR_UNKNOWN;
+
+	/* check if can read from the given address */
+	if (!access_ok(VERIFY_WRITE, buffer, count))
+		return CPC_ERR_UNKNOWN;
+
+	/* lock this object */
+	down(&card->sem);
+
+	/* verify that the device wasn't unplugged */
+	if (!card->present) {
+		up(&card->sem);
+		return CPC_ERR_NO_INTERFACE_PRESENT;
+	}
+
+	if (IsBufferEmpty(card->chan)) {
+		retval = 0;
+	} else {
+		chan = card->chan;
+
+#if 0
+		/* convert LPC2119 params back to SJA1000 params */
+		if (card->deviceRevision >= 0x0200
+		    && chan->buf[chan->oidx].type == CPC_MSG_T_CAN_PRMS) {
+			LPC2119_TO_SJA1000_Params(&chan->buf[chan->oidx]);
+		}
+#endif
+
+		if (copy_to_user(buffer, &chan->buf[chan->oidx], count) != 0) {
+			retval = CPC_ERR_IO_TRANSFER;
+		} else {
+			chan->oidx = (chan->oidx + 1) % CPC_MSG_BUF_CNT;
+			chan->WnR = 1;
+			retval = sizeof(CPC_MSG_T);
+		}
+	}
+/*	spin_unlock_irqrestore(&card->slock, flags); */
+
+	/* unlock the device */
+	up(&card->sem);
+
+	return retval;
+}
+
+#define SHIFT  1
+static inline void cpcusb_align_buffer_alignment(unsigned char *buf)
+{
+	/* CPC-USB uploads packed bytes. */
+	CPC_MSG_T *cpc = (CPC_MSG_T *) buf;
+	unsigned int i;
+
+	for (i = 0; i < cpc->length + (2 * sizeof(unsigned long)); i++) {
+		((unsigned char *) &cpc->msgid)[1 + i] =
+		    ((unsigned char *) &cpc->msgid)[1 + SHIFT + i];
+	}
+}
+
+static int cpc_get_buffer_count(CPC_CHAN_T *chan)
+{
+	/* check the buffer parameters */
+	if (chan->iidx == chan->oidx)
+		return !chan->WnR ? CPC_MSG_BUF_CNT : 0;
+	else if (chan->iidx >= chan->oidx)
+		return (chan->iidx - chan->oidx) % CPC_MSG_BUF_CNT;
+
+	return (chan->iidx + CPC_MSG_BUF_CNT - chan->oidx) % CPC_MSG_BUF_CNT;
+}
+
+static ssize_t cpcusb_write(struct file *file, const char *buffer,
+			    size_t count, loff_t *ppos)
+{
+	CPC_USB_T *card = (CPC_USB_T *) file->private_data;
+	CPC_USB_WRITE_URB_T *wrUrb = NULL;
+
+	ssize_t bytes_written = 0;
+	int retval = 0;
+	int j;
+
+	unsigned char *obuf = NULL;
+	unsigned char type = 0;
+	CPC_MSG_T *info = NULL;
+
+	dbg("%s - entered minor %d, count = %zu, present = %d",
+	    __func__, card->minor, count, card->present);
+
+	if (count > sizeof(CPC_MSG_T))
+		return CPC_ERR_UNKNOWN;
+
+	/* check if can read from the given address */
+	if (!access_ok(VERIFY_READ, buffer, count))
+		return CPC_ERR_UNKNOWN;
+
+	/* lock this object */
+	down(&card->sem);
+
+	/* verify that the device wasn't unplugged */
+	if (!card->present) {
+		retval = CPC_ERR_NO_INTERFACE_PRESENT;
+		goto exit;
+	}
+
+	/* verify that we actually have some data to write */
+	if (count == 0) {
+		dbg("%s - write request of 0 bytes", __func__);
+		goto exit;
+	}
+
+	if (card->free_slots <= 5) {
+		info = (CPC_MSG_T *) buffer;
+
+		if (info->type != CPC_CMD_T_CLEAR_CMD_QUEUE
+		    || card->free_slots <= 0) {
+			dbg("%s - send buffer full please try again %d",
+			    __func__, card->free_slots);
+			retval = CPC_ERR_CAN_NO_TRANSMIT_BUF;
+			goto exit;
+		}
+	}
+
+	/* Find a free write urb */
+	for (j = 0; j < CPC_USB_URB_CNT; j++) {
+		if (!atomic_read(&card->wrUrbs[j].busy)) {
+			wrUrb = &card->wrUrbs[j];	/* remember found URB */
+			atomic_set(&wrUrb->busy, 1);	/* lock this URB      */
+			init_completion(&wrUrb->finished);	/* init completion    */
+			dbg("WR URB no. %d started", j);
+			break;
+		}
+	}
+
+	/* don't found write urb say error */
+	if (!wrUrb) {
+		dbg("%s - no free send urb available", __func__);
+		retval = CPC_ERR_CAN_NO_TRANSMIT_BUF;
+		goto exit;
+	}
+	dbg("URB write req");
+
+	obuf = (unsigned char *) wrUrb->urb->transfer_buffer;
+
+	/* copy the data from userspace into our transfer buffer;
+	 * this is the only copy required.
+	 */
+	if (copy_from_user(&obuf[4], buffer, count) != 0) {
+		atomic_set(&wrUrb->busy, 0);	/* release urb */
+		retval = CPC_ERR_IO_TRANSFER;
+		goto exit;
+	}
+
+	/* check if it is a DRIVER information message, so we can
+	 * response to that message and not the USB
+	 */
+	info = (CPC_MSG_T *) &obuf[4];
+
+	bytes_written = 11 + info->length;
+	if (bytes_written >= wrUrb->size) {
+		retval = CPC_ERR_IO_TRANSFER;
+		goto exit;
+	}
+
+	switch (info->type) {
+	case CPC_CMD_T_CLEAR_MSG_QUEUE:
+		ResetBuffer(card->chan);
+		break;
+
+	case CPC_CMD_T_INQ_MSG_QUEUE_CNT:
+		retval = cpc_get_buffer_count(card->chan);
+		atomic_set(&wrUrb->busy, 0);
+
+		goto exit;
+
+	case CPC_CMD_T_INQ_INFO:
+		if (info->msg.info.source == CPC_INFOMSG_T_DRIVER) {
+			/* release urb cause we'll use it for driver
+			 * information
+			 */
+			atomic_set(&wrUrb->busy, 0);
+			if (IsBufferFull(card->chan)) {
+				retval = CPC_ERR_IO_TRANSFER;
+				goto exit;
+			}
+
+			/* it is a driver information request message and we have
+			 * free rx slots to store the response
+			 */
+			type = info->msg.info.type;
+			info = &card->chan->buf[card->chan->iidx];
+
+			info->type = CPC_MSG_T_INFO;
+			info->msg.info.source = CPC_INFOMSG_T_DRIVER;
+			info->msg.info.type = type;
+
+			switch (type) {
+			case CPC_INFOMSG_T_VERSION:
+				info->length = strlen(CPC_DRIVER_VERSION) + 2;
+				sprintf(info->msg.info.msg, "%s\n",
+					CPC_DRIVER_VERSION);
+				break;
+
+			case CPC_INFOMSG_T_SERIAL:
+				info->length = strlen(CPC_DRIVER_SERIAL) + 2;
+				sprintf(info->msg.info.msg, "%s\n",
+					CPC_DRIVER_SERIAL);
+				break;
+
+			default:
+				info->length = 2;
+				info->msg.info.type =
+				    CPC_INFOMSG_T_UNKNOWN_TYPE;
+			}
+
+			card->chan->WnR = 0;
+			card->chan->iidx =
+			    (card->chan->iidx + 1) % CPC_MSG_BUF_CNT;
+
+			retval = info->length;
+			goto exit;
+		}
+		break;
+	case CPC_CMD_T_CAN_PRMS:
+		/* Check the controller type. If it's the new CPC-USB, make sure if these are SJA1000 params */
+		if (info->msg.canparams.cc_type != SJA1000
+		    && info->msg.canparams.cc_type != M16C_BASIC
+		    && (card->productId == USB_CPCUSB_LPC2119_PRODUCT_ID
+			&& info->msg.canparams.cc_type != SJA1000)) {
+			/* don't forget to release the urb */
+			atomic_set(&wrUrb->busy, 0);
+			retval = CPC_ERR_WRONG_CONTROLLER_TYPE;
+			goto exit;
+		}
+		break;
+	}
+
+	/* just convert the params if it is an old CPC-USB with M16C controller */
+	if (card->productId == USB_CPCUSB_M16C_PRODUCT_ID) {
+		/* if it is a parameter message convert it from SJA1000 controller
+		 * settings to M16C Basic controller settings
+		 */
+		SJA1000_TO_M16C_BASIC_Params((CPC_MSG_T *) &obuf[4]);
+	}
+
+	/* don't forget the byte alignment */
+	cpcusb_align_buffer_alignment(&obuf[4]);
+
+	/* setup a the 4 byte header */
+	obuf[0] = obuf[1] = obuf[2] = obuf[3] = 0;
+
+	/* this urb was already set up, except for this write size */
+	wrUrb->urb->transfer_buffer_length = bytes_written + 4;
+
+	/* send the data out the bulk port */
+	/* a character device write uses GFP_KERNEL,
+	   unless a spinlock is held */
+	retval = usb_submit_urb(wrUrb->urb, GFP_KERNEL);
+	if (retval) {
+		atomic_set(&wrUrb->busy, 0);	/* release urb */
+		err("%s - failed submitting write urb, error %d",
+		    __func__, retval);
+	} else {
+		retval = bytes_written;
+	}
+
+exit:
+	/* unlock the device */
+	up(&card->sem);
+
+	dbg("%s - leaved", __func__);
+
+	return retval;
+}
+
+/*
+ * callback for interrupt IN urb
+ */
+static void cpcusb_read_interrupt_callback(struct urb *urb)
+{
+	CPC_USB_T *card = (CPC_USB_T *) urb->context;
+	int retval;
+	unsigned long flags;
+
+	spin_lock_irqsave(&card->slock, flags);
+
+	if (!card->present) {
+		spin_unlock_irqrestore(&card->slock, flags);
+		info("%s - no such device", __func__);
+		return;
+	}
+
+	switch (urb->status) {
+	case 0: /* success */
+		card->free_slots = card->intr_in_buffer[1];
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* urb was killed */
+		spin_unlock_irqrestore(&card->slock, flags);
+		dbg("%s - intr urb killed", __func__);
+		return;
+	default:
+		info("%s - nonzero urb status %d", __func__, urb->status);
+		break;
+	}
+
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval) {
+		err("%s - failed resubmitting intr urb, error %d",
+		    __func__, retval);
+	}
+
+	spin_unlock_irqrestore(&card->slock, flags);
+	wake_up_interruptible(card->chan->CPCWait_q);
+
+	return;
+}
+
+#define UN_SHIFT  1
+#define CPCMSG_HEADER_LEN_FIRMWARE   11
+static inline int cpcusb_unalign_and_copy_buffy(unsigned char *out,
+						unsigned char *in)
+{
+	unsigned int i, j;
+
+	for (i = 0; i < 3; i++)
+		out[i] = in[i];
+
+	for (j = 0; j < (in[1] + (CPCMSG_HEADER_LEN_FIRMWARE - 3)); j++)
+		out[j + i + UN_SHIFT] = in[j + i];
+
+	return i + j;
+}
+
+/*
+ * callback for bulk IN urb
+ */
+static void cpcusb_read_bulk_callback(struct urb *urb)
+{
+	CPC_USB_T *card = (CPC_USB_T *) urb->context;
+	CPC_CHAN_T *chan;
+	unsigned char *ibuf = urb->transfer_buffer;
+	int retval, msgCnt, start, again = 0;
+	unsigned long flags;
+
+	if (!card) {
+		err("%s - device object lost", __func__);
+		return;
+	}
+
+	spin_lock_irqsave(&card->slock, flags);
+
+	if (!card->present) {
+		spin_unlock_irqrestore(&card->slock, flags);
+		info("%s - no such device", __func__);
+		return;
+	}
+
+	switch (urb->status) {
+	case 0:		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* urb was killed */
+		spin_unlock_irqrestore(&card->slock, flags);
+		dbg("%s - read urb killed", __func__);
+		return;
+	default:
+		info("%s - nonzero urb status %d", __func__, urb->status);
+		break;
+	}
+
+	if (urb->actual_length) {
+		msgCnt = ibuf[0] & ~0x80;
+		again = ibuf[0] & 0x80;
+
+		/* we have a 4 byte header */
+		start = 4;
+		chan = card->chan;
+		while (msgCnt) {
+			if (!(IsBufferFull(card->chan))) {
+				start +=
+				    cpcusb_unalign_and_copy_buffy((unsigned char *)
+							  &chan->buf[chan->iidx], &ibuf[start]);
+
+				if (start > urb->transfer_buffer_length) {
+					err("%d > %d", start, urb->transfer_buffer_length);
+					break;
+				}
+
+				chan->WnR = 0;
+				chan->iidx = (chan->iidx + 1) % CPC_MSG_BUF_CNT;
+				msgCnt--;
+			} else {
+				break;
+			}
+		}
+	}
+
+	usb_fill_bulk_urb(urb, card->udev,
+			  usb_rcvbulkpipe(card->udev, card->num_bulk_in),
+			  urb->transfer_buffer,
+			  urb->transfer_buffer_length,
+			  cpcusb_read_bulk_callback, card);
+
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+
+	if (retval) {
+		err("%s - failed resubmitting read urb, error %d", __func__, retval);
+	}
+
+	spin_unlock_irqrestore(&card->slock, flags);
+
+	wake_up_interruptible(card->chan->CPCWait_q);
+}
+
+/*
+ * callback for bulk IN urb
+ */
+static void cpcusb_write_bulk_callback(struct urb *urb)
+{
+	CPC_USB_T *card = (CPC_USB_T *) urb->context;
+	unsigned long flags;
+	int j;
+
+	spin_lock_irqsave(&card->slock, flags);
+
+	/* find this urb */
+	for (j = 0; j < CPC_USB_URB_CNT; j++) {
+		if (card->wrUrbs[j].urb == urb) {
+			dbg("URB found no. %d", j);
+			/* notify anyone waiting that the write has finished */
+			complete(&card->wrUrbs[j].finished);
+			atomic_set(&card->wrUrbs[j].busy, 0);
+			break;
+		}
+	}
+
+	switch (urb->status) {
+	case 0:		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* urb was killed */
+		spin_unlock_irqrestore(&card->slock, flags);
+		dbg("%s - write urb no. %d killed", __func__, j);
+		return;
+	default:
+		info("%s - nonzero urb status %d", __func__, urb->status);
+		break;
+	}
+
+	spin_unlock_irqrestore(&card->slock, flags);
+
+	wake_up_interruptible(card->chan->CPCWait_q);
+}
+
+static inline int cpcusb_get_free_slot(void)
+{
+	int i;
+
+	for (i = 0; i < CPC_USB_CARD_CNT; i++) {
+		if (!CPCUSB_Table[i])
+			return i;
+	}
+
+	return -1;
+}
+
+/*
+ * probe function for new CPC-USB devices
+ */
+static int cpcusb_probe(struct usb_interface *interface,
+			const struct usb_device_id *id)
+{
+	CPC_USB_T *card = NULL;
+	CPC_CHAN_T *chan = NULL;
+
+	struct usb_device *udev = interface_to_usbdev(interface);
+	struct usb_host_interface *iface_desc;
+	struct usb_endpoint_descriptor *endpoint;
+
+	int i, j, retval = -ENOMEM, slot;
+
+	slot = cpcusb_get_free_slot();
+	if (slot < 0) {
+		info("No more devices supported");
+		return -ENOMEM;
+	}
+
+	/* allocate memory for our device state and initialize it */
+	card = kzalloc(sizeof(CPC_USB_T), GFP_KERNEL);
+	if (!card) {
+		err("Out of memory");
+		return -ENOMEM;
+	}
+	CPCUSB_Table[slot] = card;
+
+	/* allocate and initialize the channel struct */
+	card->chan = kmalloc(sizeof(CPC_CHAN_T), GFP_KERNEL);
+	if (!card->chan) {
+		kfree(card);
+		err("Out of memory");
+		return -ENOMEM;
+	}
+
+	chan = card->chan;
+	memset(chan, 0, sizeof(CPC_CHAN_T));
+	ResetBuffer(chan);
+
+	init_MUTEX(&card->sem);
+	spin_lock_init(&card->slock);
+
+	card->udev = udev;
+	card->interface = interface;
+	if (udev->descriptor.iSerialNumber) {
+		usb_string(udev, udev->descriptor.iSerialNumber, card->serialNumber,
+				   128);
+		info("Serial %s", card->serialNumber);
+	}
+
+	card->productId = udev->descriptor.idProduct;
+	info("Product %s",
+	     card->productId == USB_CPCUSB_LPC2119_PRODUCT_ID ?
+			 "CPC-USB/ARM7" : "CPC-USB/M16C");
+
+	/* set up the endpoint information */
+	/* check out the endpoints */
+	/* use only the first bulk-in and bulk-out endpoints */
+	iface_desc = &interface->altsetting[0];
+	for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
+		endpoint = &iface_desc->endpoint[i].desc;
+
+		if (!card->num_intr_in &&
+		    (endpoint->bEndpointAddress & USB_DIR_IN) &&
+		    ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+		     == USB_ENDPOINT_XFER_INT)) {
+			card->intr_in_urb = usb_alloc_urb(0, GFP_KERNEL);
+			card->num_intr_in = 1;
+
+			if (!card->intr_in_urb) {
+				err("No free urbs available");
+				goto error;
+			}
+
+			dbg("intr_in urb %d", card->num_intr_in);
+		}
+
+		if (!card->num_bulk_in &&
+		    (endpoint->bEndpointAddress & USB_DIR_IN) &&
+		    ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+		     == USB_ENDPOINT_XFER_BULK)) {
+			card->num_bulk_in = 2;
+			for (j = 0; j < CPC_USB_URB_CNT; j++) {
+				card->urbs[j].size = endpoint->wMaxPacketSize;
+				card->urbs[j].urb = usb_alloc_urb(0, GFP_KERNEL);
+				if (!card->urbs[j].urb) {
+					err("No free urbs available");
+					goto error;
+				}
+				card->urbs[j].buffer =
+				    usb_buffer_alloc(udev,
+						     card->urbs[j].size,
+						     GFP_KERNEL,
+						     &card->urbs[j].urb->transfer_dma);
+				if (!card->urbs[j].buffer) {
+					err("Couldn't allocate bulk_in_buffer");
+					goto error;
+				}
+			}
+			info("%s - %d reading URB's allocated",
+			     __func__, CPC_USB_URB_CNT);
+		}
+
+		if (!card->num_bulk_out &&
+		    !(endpoint->bEndpointAddress & USB_DIR_IN) &&
+		    ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+		     == USB_ENDPOINT_XFER_BULK)) {
+
+			card->num_bulk_out = 2;
+
+			for (j = 0; j < CPC_USB_URB_CNT; j++) {
+				card->wrUrbs[j].size =
+				    endpoint->wMaxPacketSize;
+				card->wrUrbs[j].urb =
+				    usb_alloc_urb(0, GFP_KERNEL);
+				if (!card->wrUrbs[j].urb) {
+					err("No free urbs available");
+					goto error;
+				}
+				card->wrUrbs[j].buffer = usb_buffer_alloc(udev,
+							       card->wrUrbs[j].size, GFP_KERNEL,
+							       &card->wrUrbs[j].urb->transfer_dma);
+
+				if (!card->wrUrbs[j].buffer) {
+					err("Couldn't allocate bulk_out_buffer");
+					goto error;
+				}
+
+				usb_fill_bulk_urb(card->wrUrbs[j].urb, udev,
+						usb_sndbulkpipe(udev, endpoint->bEndpointAddress),
+						card->wrUrbs[j].buffer,
+						card->wrUrbs[j].size,
+						cpcusb_write_bulk_callback,
+						card);
+			}
+
+			info("%s - %d writing URB's allocated", __func__, CPC_USB_URB_CNT);
+		}
+	}
+
+	if (!(card->num_bulk_in && card->num_bulk_out)) {
+		err("Couldn't find both bulk-in and bulk-out endpoints");
+		goto error;
+	}
+
+	/* allow device read, write and ioctl */
+	card->present = 1;
+
+	/* we can register the device now, as it is ready */
+	usb_set_intfdata(interface, card);
+	retval = usb_register_dev(interface, &cpcusb_class);
+
+	if (retval) {
+		/* something prevented us from registering this driver */
+		err("Not able to get a minor for this device.");
+		usb_set_intfdata(interface, NULL);
+		goto error;
+	}
+
+	card->chan->minor = card->minor = interface->minor;
+
+	chan->buf = vmalloc(sizeof(CPC_MSG_T) * CPC_MSG_BUF_CNT);
+	if (chan->buf == NULL) {
+		err("Out of memory");
+		retval = -ENOMEM;
+		goto error;
+	}
+	info("Allocated memory for %d messages (%lu kbytes)",
+	     CPC_MSG_BUF_CNT, (long unsigned int)(sizeof(CPC_MSG_T) * CPC_MSG_BUF_CNT) / 1000);
+	memset(chan->buf, 0, sizeof(CPC_MSG_T) * CPC_MSG_BUF_CNT);
+
+	ResetBuffer(chan);
+
+	card->chan->CPCWait_q = kmalloc(sizeof(wait_queue_head_t), GFP_KERNEL);
+	if (!card->chan->CPCWait_q) {
+		err("Out of memory");
+		retval = -ENOMEM;
+		goto error;
+	}
+	init_waitqueue_head(card->chan->CPCWait_q);
+
+	CPCUSB_Table[slot] = card;
+	card->idx = slot;
+	CPCUsbCnt++;
+
+	/* let the user know what node this device is now attached to */
+	info("Device now attached to USB-%d", card->minor);
+	return 0;
+
+error:
+	for (j = 0; j < CPC_USB_URB_CNT; j++) {
+		if (card->urbs[j].buffer) {
+			usb_buffer_free(card->udev, card->urbs[j].size,
+					card->urbs[j].buffer,
+					card->urbs[j].urb->transfer_dma);
+			card->urbs[j].buffer = NULL;
+		}
+		if (card->urbs[j].urb) {
+			usb_free_urb(card->urbs[j].urb);
+			card->urbs[j].urb = NULL;
+		}
+	}
+
+	cpcusb_delete(card);
+	return retval;
+}
+
+/*
+ * called by the usb core when the device is removed from the system
+ */
+static void cpcusb_disconnect(struct usb_interface *interface)
+{
+	CPC_USB_T *card = NULL;
+	int minor, j;
+
+	/* prevent races with open() */
+	down(&disconnect_sem);
+
+	card = usb_get_intfdata(interface);
+	usb_set_intfdata(interface, NULL);
+
+	down(&card->sem);
+
+	/* prevent device read, write and ioctl */
+	card->present = 0;
+
+	minor = card->minor;
+
+	/* free all urbs and their buffers */
+	for (j = 0; j < CPC_USB_URB_CNT; j++) {
+		/* terminate an ongoing write */
+		if (atomic_read(&card->wrUrbs[j].busy)) {
+			usb_kill_urb(card->wrUrbs[j].urb);
+			wait_for_completion(&card->wrUrbs[j].finished);
+		}
+		usb_buffer_free(card->udev, card->wrUrbs[j].size,
+				card->wrUrbs[j].buffer,
+				card->wrUrbs[j].urb->transfer_dma);
+		usb_free_urb(card->wrUrbs[j].urb);
+	}
+	info("%d write URBs freed", CPC_USB_URB_CNT);
+
+	/* free all urbs and their buffers */
+	for (j = 0; j < CPC_USB_URB_CNT; j++) {
+		usb_buffer_free(card->udev, card->urbs[j].size,
+				card->urbs[j].buffer,
+				card->urbs[j].urb->transfer_dma);
+		usb_free_urb(card->urbs[j].urb);
+	}
+	info("%d read URBs freed", CPC_USB_URB_CNT);
+	usb_free_urb(card->intr_in_urb);
+
+	/* give back our minor */
+	usb_deregister_dev(interface, &cpcusb_class);
+
+	up(&card->sem);
+
+	/* if the device is opened, cpcusb_release will clean this up */
+	if (!card->open)
+		cpcusb_delete(card);
+	else
+		wake_up_interruptible(card->chan->CPCWait_q);
+
+	up(&disconnect_sem);
+
+	CPCUsbCnt--;
+	info("USB-%d now disconnected", minor);
+}
+
+static int __init CPCUsb_Init(void)
+{
+	int result, i;
+
+	info(DRIVER_DESC " v" DRIVER_VERSION);
+	info("Build on " __DATE__ " at " __TIME__);
+
+	for (i = 0; i < CPC_USB_CARD_CNT; i++)
+		CPCUSB_Table[i] = 0;
+
+	/* register this driver with the USB subsystem */
+	result = usb_register(&cpcusb_driver);
+	if (result) {
+		err("usb_register failed. Error number %d", result);
+		return result;
+	}
+
+	procDir = proc_mkdir(CPC_USB_PROC_DIR, NULL);
+	if (!procDir) {
+		err("Could not create proc entry");
+	} else {
+		procEntry = create_proc_read_entry("info", 0444, procDir,
+						   cpcusb_proc_read_info,
+						   NULL);
+		if (!procEntry) {
+			err("Could not create proc entry %s", CPC_USB_PROC_DIR "/info");
+			remove_proc_entry(CPC_USB_PROC_DIR, NULL);
+			procDir = NULL;
+		}
+	}
+
+	return 0;
+}
+
+static void __exit CPCUsb_Exit(void)
+{
+	wait_event(rmmodWq, !atomic_read(&useCount));
+
+	/* deregister this driver with the USB subsystem */
+	usb_deregister(&cpcusb_driver);
+
+	if (procDir) {
+		if (procEntry)
+			remove_proc_entry("info", procDir);
+		remove_proc_entry(CPC_USB_PROC_DIR, NULL);
+	}
+}
+
+module_init(CPCUsb_Init);
+module_exit(CPCUsb_Exit);
diff --git a/drivers/staging/cpc-usb/cpc.h b/drivers/staging/cpc-usb/cpc.h
new file mode 100644
index 00000000000..ed8cb34d476
--- /dev/null
+++ b/drivers/staging/cpc-usb/cpc.h
@@ -0,0 +1,440 @@
+/*
+ * CPC CAN Interface Definitions
+ *
+ * Copyright (C) 2000-2008 EMS Dr. Thomas Wuensche
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ */
+#ifndef CPC_HEADER
+#define CPC_HEADER
+
+// the maximum length of the union members within a CPC_MSG
+// this value can be defined by the customer, but has to be
+// >= 64 bytes
+// however, if not defined before, we set a length of 64 byte
+#if !defined(CPC_MSG_LEN) || (CPC_MSG_LEN < 64)
+#undef CPC_MSG_LEN
+#define CPC_MSG_LEN 64
+#endif
+
+// check the operating system used
+#ifdef _WIN32 // running a Windows OS
+
+// define basic types on Windows platforms
+#ifdef _MSC_VER // Visual Studio
+	typedef unsigned __int8 u8;
+	typedef unsigned __int16 u16;
+	typedef unsigned __int32 u32;
+#else // Borland Compiler
+	typedef unsigned char u8;
+	typedef unsigned short u16;
+	typedef unsigned int u32;
+#endif
+	// on Windows OS we use a byte alignment of 1
+	#pragma pack(push, 1)
+
+	// set the calling conventions for the library function calls
+	#define CALL_CONV __stdcall
+#else
+	// Kernel headers already define this types
+	#ifndef __KERNEL__
+		// define basic types
+		typedef unsigned char u8;
+		typedef unsigned short u16;
+		typedef unsigned int u32;
+	#endif
+
+	// Linux does not use this calling convention
+	#define CALL_CONV
+#endif
+
+// Transmission of events from CPC interfaces to PC can be individually
+// controlled per event type. Default state is: don't transmit
+// Control values are constructed by bit-or of Subject and Action
+// and passed to CPC_Control()
+
+// Control-Values for CPC_Control() Command Subject Selection
+#define CONTR_CAN_Message 0x04
+#define CONTR_Busload	  0x08
+#define	CONTR_CAN_State	  0x0C
+#define	CONTR_SendAck	  0x10
+#define	CONTR_Filter	  0x14
+#define CONTR_CmdQueue    0x18	// reserved, do not use
+#define CONTR_BusError    0x1C
+
+// Control Command Actions
+#define CONTR_CONT_OFF    0
+#define CONTR_CONT_ON     1
+#define CONTR_SING_ON     2
+// CONTR_SING_ON doesn't change CONTR_CONT_ON state, so it should be
+// read as: transmit at least once
+
+// defines for confirmed request
+#define DO_NOT_CONFIRM 0
+#define DO_CONFIRM     1
+
+// event flags
+#define EVENT_READ 0x01
+#define EVENT_WRITE 0x02
+
+// Messages from CPC to PC contain a message object type field.
+// The following message types are sent by CPC and can be used in
+// handlers, others should be ignored.
+#define CPC_MSG_T_RESYNC        0 // Normally to be ignored
+#define CPC_MSG_T_CAN           1 // CAN data frame
+#define CPC_MSG_T_BUSLOAD       2 // Busload message
+#define CPC_MSG_T_STRING        3 // Normally to be ignored
+#define CPC_MSG_T_CONTI         4 // Normally to be ignored
+#define CPC_MSG_T_MEM           7 // Normally not to be handled
+#define	CPC_MSG_T_RTR           8 // CAN remote frame
+#define CPC_MSG_T_TXACK	        9 // Send acknowledge
+#define CPC_MSG_T_POWERUP      10 // Power-up message
+#define	CPC_MSG_T_CMD_NO       11 // Normally to be ignored
+#define	CPC_MSG_T_CAN_PRMS     12 // Actual CAN parameters
+#define	CPC_MSG_T_ABORTED      13 // Command aborted message
+#define	CPC_MSG_T_CANSTATE     14 // CAN state message
+#define CPC_MSG_T_RESET        15 // used to reset CAN-Controller
+#define	CPC_MSG_T_XCAN         16 // XCAN data frame
+#define CPC_MSG_T_XRTR         17 // XCAN remote frame
+#define CPC_MSG_T_INFO         18 // information strings
+#define CPC_MSG_T_CONTROL      19 // used for control of interface/driver behaviour
+#define CPC_MSG_T_CONFIRM      20 // response type for confirmed requests
+#define CPC_MSG_T_OVERRUN      21 // response type for overrun conditions
+#define CPC_MSG_T_KEEPALIVE    22 // response type for keep alive conditions
+#define CPC_MSG_T_CANERROR     23 // response type for bus error conditions
+#define CPC_MSG_T_DISCONNECTED 24 // response type for a disconnected interface
+#define CPC_MSG_T_ERR_COUNTER  25 // RX/TX error counter of CAN controller
+
+#define CPC_MSG_T_FIRMWARE    100 // response type for USB firmware download
+
+// Messages from the PC to the CPC interface contain a command field
+// Most of the command types are wrapped by the library functions and have therefore
+// normally not to be used.
+// However, programmers who wish to circumvent the library and talk directly
+// to the drivers (mainly Linux programmers) can use the following
+// command types:
+
+#define CPC_CMD_T_CAN                 1	// CAN data frame
+#define CPC_CMD_T_CONTROL             3	// used for control of interface/driver behaviour
+#define	CPC_CMD_T_CAN_PRMS            6	// set CAN parameters
+#define	CPC_CMD_T_CLEARBUF            8	// clears input queue; this is depricated, use CPC_CMD_T_CLEAR_MSG_QUEUE instead
+#define	CPC_CMD_T_INQ_CAN_PARMS      11	// inquire actual CAN parameters
+#define	CPC_CMD_T_FILTER_PRMS        12	// set filter parameter
+#define	CPC_CMD_T_RTR                13	// CAN remote frame
+#define	CPC_CMD_T_CANSTATE           14	// CAN state message
+#define	CPC_CMD_T_XCAN               15	// XCAN data frame
+#define CPC_CMD_T_XRTR               16	// XCAN remote frame
+#define CPC_CMD_T_RESET              17	// used to reset CAN-Controller
+#define CPC_CMD_T_INQ_INFO           18	// miscellanous information strings
+#define CPC_CMD_T_OPEN_CHAN          19	// open a channel
+#define CPC_CMD_T_CLOSE_CHAN         20	// close a channel
+#define CPC_CMD_T_CNTBUF             21	// this is depricated, use CPC_CMD_T_INQ_MSG_QUEUE_CNT instead
+#define CPC_CMD_T_CAN_EXIT          200 // exit the CAN (disable interrupts; reset bootrate; reset output_cntr; mode = 1)
+
+#define CPC_CMD_T_INQ_MSG_QUEUE_CNT  CPC_CMD_T_CNTBUF   // inquires the count of elements in the message queue
+#define CPC_CMD_T_INQ_ERR_COUNTER    25	                // request the CAN controllers error counter
+#define	CPC_CMD_T_CLEAR_MSG_QUEUE    CPC_CMD_T_CLEARBUF // clear CPC_MSG queue
+#define	CPC_CMD_T_CLEAR_CMD_QUEUE    28	                // clear CPC_CMD queue
+#define CPC_CMD_T_FIRMWARE          100                 // reserved, must not be used
+#define CPC_CMD_T_USB_RESET         101                 // reserved, must not be used
+#define CPC_CMD_T_WAIT_NOTIFY       102                 // reserved, must not be used
+#define CPC_CMD_T_WAIT_SETUP        103                 // reserved, must not be used
+#define	CPC_CMD_T_ABORT             255                 // Normally not to be used
+
+// definitions for CPC_MSG_T_INFO
+// information sources
+#define CPC_INFOMSG_T_UNKNOWN_SOURCE 0
+#define CPC_INFOMSG_T_INTERFACE      1
+#define CPC_INFOMSG_T_DRIVER         2
+#define CPC_INFOMSG_T_LIBRARY        3
+
+// information types
+#define CPC_INFOMSG_T_UNKNOWN_TYPE   0
+#define CPC_INFOMSG_T_VERSION        1
+#define CPC_INFOMSG_T_SERIAL         2
+
+// definitions for controller types
+#define PCA82C200   1 // Philips basic CAN controller, replaced by SJA1000
+#define SJA1000     2 // Philips basic CAN controller
+#define AN82527     3 // Intel full CAN controller
+#define M16C_BASIC  4 // M16C controller running in basic CAN (not full CAN) mode
+
+// channel open error codes
+#define CPC_ERR_NO_FREE_CHANNEL            -1	// no more free space within the channel array
+#define CPC_ERR_CHANNEL_ALREADY_OPEN       -2	// the channel is already open
+#define CPC_ERR_CHANNEL_NOT_ACTIVE         -3	// access to a channel not active failed
+#define CPC_ERR_NO_DRIVER_PRESENT          -4	// no driver at the location searched by the library
+#define CPC_ERR_NO_INIFILE_PRESENT         -5	// the library could not find the inifile
+#define CPC_ERR_WRONG_PARAMETERS           -6	// wrong parameters in the inifile
+#define CPC_ERR_NO_INTERFACE_PRESENT       -7	// 1. The specified interface is not connected
+						// 2. The interface (mostly CPC-USB) was disconnected upon operation
+#define CPC_ERR_NO_MATCHING_CHANNEL        -8	// the driver couldn't find a matching channel
+#define CPC_ERR_NO_BUFFER_AVAILABLE        -9	// the driver couldn't allocate buffer for messages
+#define CPC_ERR_NO_INTERRUPT               -10	// the requested interrupt couldn't be claimed
+#define CPC_ERR_NO_MATCHING_INTERFACE      -11	// no interface type related to this channel was found
+#define CPC_ERR_NO_RESOURCES               -12	// the requested resources could not be claimed
+#define CPC_ERR_SOCKET                     -13	// error concerning TCP sockets
+
+// init error codes
+#define CPC_ERR_WRONG_CONTROLLER_TYPE      -14	// wrong CAN controller type within initialization
+#define CPC_ERR_NO_RESET_MODE              -15	// the controller could not be set into reset mode
+#define CPC_ERR_NO_CAN_ACCESS              -16	// the CAN controller could not be accessed
+
+// transmit error codes
+#define CPC_ERR_CAN_WRONG_ID               -20	// the provided CAN id is too big
+#define CPC_ERR_CAN_WRONG_LENGTH           -21	// the provided CAN length is too long
+#define CPC_ERR_CAN_NO_TRANSMIT_BUF        -22	// the transmit buffer was occupied
+#define CPC_ERR_CAN_TRANSMIT_TIMEOUT       -23	// The message could not be sent within a
+						// specified time
+
+// other error codes
+#define CPC_ERR_SERVICE_NOT_SUPPORTED      -30	// the requested service is not supported by the interface
+#define CPC_ERR_IO_TRANSFER                -31	// a transmission error down to the driver occurred
+#define CPC_ERR_TRANSMISSION_FAILED        -32	// a transmission error down to the interface occurred
+#define CPC_ERR_TRANSMISSION_TIMEOUT       -33	// a timeout occurred within transmission to the interface
+#define CPC_ERR_OP_SYS_NOT_SUPPORTED       -35	// the operating system is not supported
+#define CPC_ERR_UNKNOWN                    -40	// an unknown error ocurred (mostly IOCTL errors)
+
+#define CPC_ERR_LOADING_DLL                -50	// the library 'cpcwin.dll' could not be loaded
+#define CPC_ERR_ASSIGNING_FUNCTION         -51	// the specified function could not be assigned
+#define CPC_ERR_DLL_INITIALIZATION         -52	// the DLL was not initialized correctly
+#define CPC_ERR_MISSING_LICFILE            -55	// the file containing the licenses does not exist
+#define CPC_ERR_MISSING_LICENSE            -56	// a required license was not found
+
+// CAN state bit values. Ignore any bits not listed
+#define CPC_CAN_STATE_BUSOFF     0x80
+#define CPC_CAN_STATE_ERROR      0x40
+
+// Mask to help ignore undefined bits
+#define CPC_CAN_STATE_MASK       0xc0
+
+// CAN-Message representation in a CPC_MSG
+// Message object type is CPC_MSG_T_CAN or CPC_MSG_T_RTR
+// or CPC_MSG_T_XCAN or CPC_MSG_T_XRTR
+typedef struct CPC_CAN_MSG {
+	u32 id;
+	u8 length;
+	u8 msg[8];
+} CPC_CAN_MSG_T;
+
+
+// representation of the CAN parameters for the PCA82C200 controller
+typedef struct CPC_PCA82C200_PARAMS {
+	u8 acc_code;	// Acceptance-code for receive, Standard: 0
+	u8 acc_mask;	// Acceptance-mask for receive, Standard: 0xff (everything)
+	u8 btr0;	// Bus-timing register 0
+	u8 btr1;	// Bus-timing register 1
+	u8 outp_contr;	// Output-control register
+} CPC_PCA82C200_PARAMS_T;
+
+// representation of the CAN parameters for the SJA1000 controller
+typedef struct CPC_SJA1000_PARAMS {
+	u8 mode;	// enables single or dual acceptance filtering
+	u8 acc_code0;	// Acceptance-code for receive, Standard: 0
+	u8 acc_code1;
+	u8 acc_code2;
+	u8 acc_code3;
+	u8 acc_mask0;	// Acceptance-mask for receive, Standard: 0xff (everything)
+	u8 acc_mask1;
+	u8 acc_mask2;
+	u8 acc_mask3;
+	u8 btr0;	// Bus-timing register 0
+	u8 btr1;	// Bus-timing register 1
+	u8 outp_contr;	// Output-control register
+} CPC_SJA1000_PARAMS_T;
+
+// representation of the CAN parameters for the M16C controller
+// in basic CAN mode (means no full CAN)
+typedef struct CPC_M16C_BASIC_PARAMS {
+	u8 con0;
+	u8 con1;
+	u8 ctlr0;
+	u8 ctlr1;
+	u8 clk;
+	u8 acc_std_code0;
+	u8 acc_std_code1;
+	u8 acc_ext_code0;
+	u8 acc_ext_code1;
+	u8 acc_ext_code2;
+	u8 acc_ext_code3;
+	u8 acc_std_mask0;
+	u8 acc_std_mask1;
+	u8 acc_ext_mask0;
+	u8 acc_ext_mask1;
+	u8 acc_ext_mask2;
+	u8 acc_ext_mask3;
+} CPC_M16C_BASIC_PARAMS_T;
+
+// CAN params message representation
+typedef struct CPC_CAN_PARAMS {
+	u8 cc_type;	// represents the controller type
+	union {
+		CPC_M16C_BASIC_PARAMS_T m16c_basic;
+		CPC_SJA1000_PARAMS_T sja1000;
+		CPC_PCA82C200_PARAMS_T pca82c200;
+	} cc_params;
+} CPC_CAN_PARAMS_T;
+
+// the following structures are slightly different for Windows and Linux
+// To be able to use the 'Select' mechanism with Linux the application
+// needs to know the devices file desciptor.
+// This mechanism is not implemented within Windows and the file descriptor
+// is therefore not needed
+#ifdef _WIN32
+
+// CAN init params message representation
+typedef struct CPC_INIT_PARAMS {
+	CPC_CAN_PARAMS_T canparams;
+} CPC_INIT_PARAMS_T;
+
+#else// Linux
+
+// CHAN init params representation
+typedef struct CPC_CHAN_PARAMS {
+	int fd;
+} CPC_CHAN_PARAMS_T;
+
+// CAN init params message representation
+typedef struct CPC_INIT_PARAMS {
+	CPC_CHAN_PARAMS_T chanparams;
+	CPC_CAN_PARAMS_T canparams;
+} CPC_INIT_PARAMS_T;
+
+#endif
+
+// structure for confirmed message handling
+typedef struct CPC_CONFIRM {
+	u8 result; // error code
+} CPC_CONFIRM_T;
+
+// structure for information requests
+typedef struct CPC_INFO {
+	u8 source;                 // interface, driver or library
+	u8 type;                   // version or serial number
+	char msg[CPC_MSG_LEN - 2]; // string holding the requested information
+} CPC_INFO_T;
+
+// OVERRUN ///////////////////////////////////////
+// In general two types of overrun may occur.
+// A hardware overrun, where the CAN controller
+// lost a message, because the interrupt was
+// not handled before the next messgae comes in.
+// Or a software overrun, where i.e. a received
+// message could not be stored in the CPC_MSG
+// buffer.
+
+// After a software overrun has occurred
+// we wait until we have CPC_OVR_GAP slots
+// free in the CPC_MSG buffer.
+#define CPC_OVR_GAP               10
+
+// Two types of software overrun may occur.
+// A received CAN message or a CAN state event
+// can cause an overrun.
+// Note: A CPC_CMD which would normally store
+// its result immediately in the CPC_MSG
+// queue may fail, because the message queue is full.
+// This will not generate an overrun message, but
+// will halt command execution, until this command
+// is able to store its message in the message queue.
+#define CPC_OVR_EVENT_CAN       0x01
+#define CPC_OVR_EVENT_CANSTATE  0x02
+#define CPC_OVR_EVENT_BUSERROR  0x04
+
+// If the CAN controller lost a message
+// we indicate it with the highest bit
+// set in the count field.
+#define CPC_OVR_HW              0x80
+
+// structure for overrun conditions
+typedef struct {
+	u8 event;
+	u8 count;
+} CPC_OVERRUN_T;
+
+// CAN errors ////////////////////////////////////
+// Each CAN controller type has different
+// registers to record errors.
+// Therefor a structure containing the specific
+// errors is set up for each controller here
+
+// SJA1000 error structure
+// see the SJA1000 datasheet for detailed
+// explanation of the registers
+typedef struct CPC_SJA1000_CAN_ERROR {
+	u8 ecc;   // error capture code register
+	u8 rxerr; // RX error counter register
+	u8 txerr; // TX error counter register
+} CPC_SJA1000_CAN_ERROR_T;
+
+// M16C error structure
+// see the M16C datasheet for detailed
+// explanation of the registers
+typedef struct CPC_M16C_CAN_ERROR {
+	u8 tbd;	// to be defined
+} CPC_M16C_CAN_ERROR_T;
+
+// structure for CAN error conditions
+#define  CPC_CAN_ECODE_ERRFRAME   0x01
+typedef struct CPC_CAN_ERROR {
+	u8 ecode;
+	struct {
+		u8 cc_type; // CAN controller type
+		union {
+			CPC_SJA1000_CAN_ERROR_T sja1000;
+			CPC_M16C_CAN_ERROR_T m16c;
+		} regs;
+	} cc;
+} CPC_CAN_ERROR_T;
+
+// Structure containing RX/TX error counter.
+// This structure is used to request the
+// values of the CAN controllers TX and RX
+// error counter.
+typedef struct CPC_CAN_ERR_COUNTER {
+	u8 rx;
+	u8 tx;
+} CPC_CAN_ERR_COUNTER_T;
+
+// If this flag is set, transmissions from PC to CPC are protected against loss
+#define CPC_SECURE_TO_CPC	0x01
+
+// If this flag is set, transmissions from CPC to PC are protected against loss
+#define CPC_SECURE_TO_PC	0x02
+
+// If this flag is set, the CAN-transmit buffer is checked to be free before sending a message
+#define CPC_SECURE_SEND		0x04
+
+// If this flag is set, the transmission complete flag is checked
+// after sending a message
+// THIS IS CURRENTLY ONLY IMPLEMENTED IN THE PASSIVE INTERFACE DRIVERS
+#define CPC_SECURE_TRANSMIT	0x08
+
+// main message type used between library and application
+typedef struct CPC_MSG {
+	u8 type;	// type of message
+	u8 length;	// length of data within union 'msg'
+	u8 msgid;	// confirmation handle
+	u32 ts_sec;	// timestamp in seconds
+	u32 ts_nsec;	// timestamp in nano seconds
+	union {
+		u8 generic[CPC_MSG_LEN];
+		CPC_CAN_MSG_T canmsg;
+		CPC_CAN_PARAMS_T canparams;
+		CPC_CONFIRM_T confirmation;
+		CPC_INFO_T info;
+		CPC_OVERRUN_T overrun;
+		CPC_CAN_ERROR_T error;
+		CPC_CAN_ERR_COUNTER_T err_counter;
+		u8 busload;
+		u8 canstate;
+	} msg;
+} CPC_MSG_T;
+
+#ifdef _WIN32
+#pragma pack(pop)		// reset the byte alignment
+#endif
+
+#endif				// CPC_HEADER
diff --git a/drivers/staging/cpc-usb/cpc_int.h b/drivers/staging/cpc-usb/cpc_int.h
new file mode 100644
index 00000000000..a0d60c08081
--- /dev/null
+++ b/drivers/staging/cpc-usb/cpc_int.h
@@ -0,0 +1,83 @@
+/*
+ * CPCLIB
+ *
+ * Copyright (C) 2000-2008 EMS Dr. Thomas Wuensche
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ */
+#ifndef CPC_INT_H
+#define CPC_INT_H
+
+#include <linux/wait.h>
+
+#define CPC_MSG_BUF_CNT	1500
+
+#define CPC_PROC_DIR "driver/"
+
+#undef dbg
+#undef err
+#undef info
+
+/* Use our own dbg macro */
+#define dbg(format, arg...) do { if (debug) printk( KERN_INFO format "\n" , ## arg); } while (0)
+#define err(format, arg...) do { printk( KERN_INFO "ERROR " format "\n" , ## arg); } while (0)
+#define info(format, arg...) do { printk( KERN_INFO format "\n" , ## arg); } while (0)
+
+/* Macros help using of our buffers */
+#define IsBufferFull(x)     (!(x)->WnR) && ((x)->iidx == (x)->oidx)
+#define IsBufferEmpty(x)    ((x)->WnR) && ((x)->iidx == (x)->oidx)
+#define IsBufferNotEmpty(x) (!(x)->WnR) || ((x)->iidx != (x)->oidx)
+#define ResetBuffer(x)      do { (x)->oidx = (x)->iidx=0; (x)->WnR = 1; } while(0);
+
+#define CPC_BufWriteAllowed ((chan->oidx != chan->iidx) || chan->WnR)
+
+typedef void (*chan_write_byte_t) (void *chan, unsigned int reg,
+				   unsigned char val);
+typedef unsigned char (*chan_read_byte_t) (void *chan, unsigned int reg);
+
+typedef struct CPC_CHAN {
+	void __iomem * canBase;	// base address of SJA1000
+	chan_read_byte_t read_byte;	// CAN controller read access routine
+	chan_write_byte_t write_byte;	// CAN controller write access routine
+	CPC_MSG_T *buf;		// buffer for CPC msg
+	unsigned int iidx;
+	unsigned int oidx;
+	unsigned int WnR;
+	unsigned int minor;
+	unsigned int locked;
+	unsigned int irqDisabled;
+
+	unsigned char cpcCtrlCANMessage;
+	unsigned char cpcCtrlCANState;
+	unsigned char cpcCtrlBUSState;
+
+	unsigned char controllerType;
+
+	unsigned long ovrTimeSec;
+	unsigned long ovrTimeNSec;
+	unsigned long ovrLockedBuffer;
+	CPC_OVERRUN_T ovr;
+
+	/* for debugging only */
+	unsigned int handledIrqs;
+	unsigned int lostMessages;
+
+	unsigned int sentStdCan;
+	unsigned int sentExtCan;
+	unsigned int sentStdRtr;
+	unsigned int sentExtRtr;
+
+	unsigned int recvStdCan;
+	unsigned int recvExtCan;
+	unsigned int recvStdRtr;
+	unsigned int recvExtRtr;
+
+	wait_queue_head_t *CPCWait_q;
+
+	void *private;
+} CPC_CHAN_T;
+
+#endif
diff --git a/drivers/staging/cpc-usb/cpcusb.h b/drivers/staging/cpc-usb/cpcusb.h
new file mode 100644
index 00000000000..e5273ddd9e0
--- /dev/null
+++ b/drivers/staging/cpc-usb/cpcusb.h
@@ -0,0 +1,86 @@
+/* Header for CPC-USB Driver ********************
+ * Copyright 1999, 2000, 2001
+ *
+ * Company:  EMS Dr. Thomas Wuensche
+ *           Sonnenhang 3
+ *           85304 Ilmmuenster
+ *           Phone: +49-8441-490260
+ *           Fax:   +49-8441-81860
+ *           email: support@ems-wuensche.com
+ *           WWW:   www.ems-wuensche.com
+ */
+
+#ifndef CPCUSB_H
+#define CPCUSB_H
+
+#undef err
+#undef dbg
+#undef info
+
+/* Use our own dbg macro */
+#define dbg(format, arg...) do { if (debug) printk(KERN_INFO "CPC-USB: " format "\n" , ## arg); } while (0)
+#define info(format, arg...) do { printk(KERN_INFO "CPC-USB: " format "\n" , ## arg); } while (0)
+#define err(format, arg...) do { printk(KERN_INFO "CPC-USB(ERROR): " format "\n" , ## arg); } while (0)
+
+#define CPC_USB_CARD_CNT      4
+
+typedef struct CPC_USB_READ_URB {
+	unsigned char *buffer;	/* the buffer to send data */
+	size_t size;		/* the size of the send buffer */
+	struct urb *urb;	/* the urb used to send data */
+} CPC_USB_READ_URB_T;
+
+typedef struct CPC_USB_WRITE_URB {
+	unsigned char *buffer;	/* the buffer to send data */
+	size_t size;		/* the size of the send buffer */
+	struct urb *urb;	/* the urb used to send data */
+	atomic_t busy;		/* true if write urb is busy */
+	struct completion finished;	/* wait for the write to finish */
+} CPC_USB_WRITE_URB_T;
+
+#define CPC_USB_URB_CNT  10
+
+typedef struct CPC_USB {
+	struct usb_device *udev;	/* save off the usb device pointer */
+	struct usb_interface *interface;	/* the interface for this device */
+	unsigned char minor;	/* the starting minor number for this device */
+	unsigned char num_ports;	/* the number of ports this device has */
+	int num_intr_in;	/* number of interrupt in endpoints we have */
+	int num_bulk_in;	/* number of bulk in endpoints we have */
+	int num_bulk_out;	/* number of bulk out endpoints we have */
+
+	CPC_USB_READ_URB_T urbs[CPC_USB_URB_CNT];
+
+	unsigned char intr_in_buffer[4];	/* interrupt transfer buffer */
+	struct urb *intr_in_urb;	/* interrupt transfer urb */
+
+	CPC_USB_WRITE_URB_T wrUrbs[CPC_USB_URB_CNT];
+
+	int open;		/* if the port is open or not */
+	int present;		/* if the device is not disconnected */
+	struct semaphore sem;	/* locks this structure */
+
+	int free_slots;		/* free send slots of CPC-USB */
+	int idx;
+
+	spinlock_t slock;
+
+	char serialNumber[128];	/* serial number */
+	int productId;		/* product id to differ between M16C and LPC2119 */
+	CPC_CHAN_T *chan;
+} CPC_USB_T;
+
+#define CPCTable               CPCUSB_Table
+
+#define CPC_DRIVER_VERSION "0.724"
+#define CPC_DRIVER_SERIAL  "not applicable"
+
+#define OBUF_SIZE 255		// 4096
+
+/* read timeouts -- RD_NAK_TIMEOUT * RD_EXPIRE = Number of seconds */
+#define RD_NAK_TIMEOUT (10*HZ)	/* Default number of X seconds to wait */
+#define RD_EXPIRE 12		/* Number of attempts to wait X seconds */
+
+#define CPC_USB_BASE_MNR 0	/* CPC-USB start at minor 0  */
+
+#endif
diff --git a/drivers/staging/cpc-usb/sja2m16c.h b/drivers/staging/cpc-usb/sja2m16c.h
new file mode 100644
index 00000000000..654bd3fc91d
--- /dev/null
+++ b/drivers/staging/cpc-usb/sja2m16c.h
@@ -0,0 +1,41 @@
+#ifndef _SJA2M16C_H
+#define _SJA2M16C_H
+
+#include "cpc.h"
+
+#define BAUDRATE_TOLERANCE_PERCENT	1
+#define SAMPLEPOINT_TOLERANCE_PERCENT	5
+#define SAMPLEPOINT_UPPER_LIMIT		88
+
+/* M16C parameters */
+struct FIELD_C0CONR {
+	unsigned int brp:4;
+	unsigned int sam:1;
+	unsigned int pr:3;
+	unsigned int dummy:8;
+};
+struct FIELD_C1CONR {
+	unsigned int ph1:3;
+	unsigned int ph2:3;
+	unsigned int sjw:2;
+	unsigned int dummy:8;
+};
+typedef union C0CONR {
+	unsigned char c0con;
+	struct FIELD_C0CONR bc0con;
+} C0CONR_T;
+typedef union C1CONR {
+	unsigned char c1con;
+	struct FIELD_C1CONR bc1con;
+} C1CONR_T;
+
+#define SJA_TSEG1	((pParams->btr1 & 0x0f)+1)
+#define SJA_TSEG2	(((pParams->btr1 & 0x70)>>4)+1)
+#define SJA_BRP		((pParams->btr0 & 0x3f)+1)
+#define SJA_SJW		((pParams->btr0 & 0xc0)>>6)
+#define SJA_SAM		((pParams->btr1 & 0x80)>>7)
+int baudrate_m16c(int clk, int brp, int pr, int ph1, int ph2);
+int samplepoint_m16c(int brp, int pr, int ph1, int ph2);
+int SJA1000_TO_M16C_BASIC_Params(CPC_MSG_T *pMsg);
+
+#endif
diff --git a/drivers/staging/cpc-usb/sja2m16c_2.c b/drivers/staging/cpc-usb/sja2m16c_2.c
new file mode 100644
index 00000000000..bf0230fb778
--- /dev/null
+++ b/drivers/staging/cpc-usb/sja2m16c_2.c
@@ -0,0 +1,452 @@
+/****************************************************************************
+*
+*      Copyright (c) 2003,2004 by EMS Dr. Thomas Wuensche
+*
+*                  - All rights reserved -
+*
+* This code is provided "as is" without warranty of any kind, either
+* expressed or implied, including but not limited to the liability
+* concerning the freedom from material defects, the fitness for parti-
+* cular purposes or the freedom of proprietary rights of third parties.
+*
+*****************************************************************************
+* Module name.: cpcusb
+*****************************************************************************
+* Include file: cpc.h
+*****************************************************************************
+* Project.....: Windows Driver Development Kit
+* Filename....: sja2m16c.cpp
+* Authors.....: (GU) Gerhard Uttenthaler
+*               (CS) Christian Schoett
+*****************************************************************************
+* Short descr.: converts baudrate between SJA1000 and M16C
+*****************************************************************************
+* Description.: handles the baudrate conversion from SJA1000 parameters to
+*               M16C parameters
+*****************************************************************************
+* Address     : EMS Dr. Thomas Wuensche
+*               Sonnenhang 3
+*               D-85304 Ilmmuenster
+*               Tel. : +49-8441-490260
+*               Fax. : +49-8441-81860
+*               email: support@ems-wuensche.com
+*****************************************************************************
+*                            History
+*****************************************************************************
+* Version  Date        Auth Remark
+*
+* 01.00    ??          GU   - initial release
+* 01.10    ??????????  CS   - adapted to fit into the USB Windows driver
+* 02.00    18.08.2004  GU   - improved the baudrate calculating algorithm
+*                           - implemented acceptance filtering
+* 02.10    10.09.2004  CS   - adapted to fit into the USB Windows driver
+*****************************************************************************
+*                            ToDo's
+*****************************************************************************
+*/
+
+/****************************************************************************/
+/*     I N C L U D E S
+*/
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/module.h>
+#include <linux/poll.h>
+#include <linux/smp_lock.h>
+#include <linux/completion.h>
+#include <asm/uaccess.h>
+#include <linux/usb.h>
+
+#include "cpc.h"
+#include "cpc_int.h"
+#include "cpcusb.h"
+
+#include "sja2m16c.h"
+
+/*********************************************************************/
+int baudrate_m16c(int clk, int brp, int pr, int ph1, int ph2)
+{
+	return (16000000 / (1 << clk)) / 2 / (brp + 1) / (1 + pr + 1 +
+							    ph1 + 1 + ph2 +
+							    1);
+}
+
+
+/*********************************************************************/
+int samplepoint_m16c(int brp, int pr, int ph1, int ph2)
+{
+	return (100 * (1 + pr + 1 + ph1 + 1)) / (1 + pr + 1 + ph1 + 1 +
+						  ph2 + 1);
+}
+
+
+/****************************************************************************
+* Function.....: SJA1000_TO_M16C_BASIC_Params
+*
+* Task.........: This routine converts SJA1000 CAN btr parameters into M16C
+*                parameters based on the sample point and the error. In
+*                addition it converts the acceptance filter parameters to
+*                suit the M16C parameters
+*
+* Parameters...: None
+*
+* Return values: None
+*
+* Comments.....:
+*****************************************************************************
+*                History
+*****************************************************************************
+* 19.01.2005  CS   - modifed the conversion of SJA1000 filter params into
+*                    M16C params. Due to compatibility reasons with the
+*                    older 82C200 CAN controller the SJA1000
+****************************************************************************/
+int SJA1000_TO_M16C_BASIC_Params(CPC_MSG_T * in)
+{
+	int sjaBaudrate;
+	int sjaSamplepoint;
+	int *baudrate_error;	// BRP[0..15], PR[0..7], PH1[0..7], PH2[0..7]
+	int *samplepoint_error;	// BRP[0..15], PR[0..7], PH1[0..7], PH2[0..7]
+	int baudrate_error_merk;
+	int clk, brp, pr, ph1, ph2;
+	int clk_merk, brp_merk, pr_merk, ph1_merk, ph2_merk;
+	int index;
+	unsigned char acc_code0, acc_code1, acc_code2, acc_code3;
+	unsigned char acc_mask0, acc_mask1, acc_mask2, acc_mask3;
+	CPC_MSG_T * out;
+	C0CONR_T c0con;
+	C1CONR_T c1con;
+	int tmpAccCode;
+	int tmpAccMask;
+
+	    // we have to convert the parameters into M16C parameters
+	    CPC_SJA1000_PARAMS_T * pParams;
+
+	    // check if the type is CAN parameters and if we have to convert the given params
+	    if (in->type != CPC_CMD_T_CAN_PRMS
+		|| in->msg.canparams.cc_type != SJA1000)
+		return 0;
+	pParams =
+	    (CPC_SJA1000_PARAMS_T *) & in->msg.canparams.cc_params.sja1000;
+	acc_code0 = pParams->acc_code0;
+	acc_code1 = pParams->acc_code1;
+	acc_code2 = pParams->acc_code2;
+	acc_code3 = pParams->acc_code3;
+	acc_mask0 = pParams->acc_mask0;
+	acc_mask1 = pParams->acc_mask1;
+	acc_mask2 = pParams->acc_mask2;
+	acc_mask3 = pParams->acc_mask3;
+
+#ifdef _DEBUG_OUTPUT_CAN_PARAMS
+	    info("acc_code0: %2.2Xh\n", acc_code0);
+	info("acc_code1: %2.2Xh\n", acc_code1);
+	info("acc_code2: %2.2Xh\n", acc_code2);
+	info("acc_code3: %2.2Xh\n", acc_code3);
+	info("acc_mask0: %2.2Xh\n", acc_mask0);
+	info("acc_mask1: %2.2Xh\n", acc_mask1);
+	info("acc_mask2: %2.2Xh\n", acc_mask2);
+	info("acc_mask3: %2.2Xh\n", acc_mask3);
+
+#endif	/*  */
+	    if (!
+		 (baudrate_error =
+		  (int *) vmalloc(sizeof(int) * 16 * 8 * 8 * 8 * 5))) {
+		err("Could not allocate memory\n");
+		return -3;
+	}
+	if (!
+	      (samplepoint_error =
+	       (int *) vmalloc(sizeof(int) * 16 * 8 * 8 * 8 * 5))) {
+		err("Could not allocate memory\n");
+		vfree(baudrate_error);
+		return -3;
+	}
+	memset(baudrate_error, 0xff, sizeof(baudrate_error));
+	memset(samplepoint_error, 0xff, sizeof(baudrate_error));
+	sjaBaudrate =
+	    16000000 / 2 / SJA_BRP / (1 + SJA_TSEG1 + SJA_TSEG2);
+	sjaSamplepoint =
+	    100 * (1 + SJA_TSEG1) / (1 + SJA_TSEG1 + SJA_TSEG2);
+	if (sjaBaudrate == 0) {
+		vfree(baudrate_error);
+		vfree(samplepoint_error);
+		return -2;
+	}
+
+#ifdef _DEBUG_OUTPUT_CAN_PARAMS
+	    info("\nStarting SJA CAN params\n");
+	info("-------------------------\n");
+	info("TS1     : %2.2Xh TS2 : %2.2Xh\n", SJA_TSEG1, SJA_TSEG2);
+	info("BTR0    : %2.2Xh BTR1: %2.2Xh\n", pParams->btr0,
+	      pParams->btr1);
+	info("Baudrate: %d.%dkBaud\n", sjaBaudrate / 1000,
+	      sjaBaudrate % 1000);
+	info("Sample P: 0.%d\n", sjaSamplepoint);
+	info("\n");
+
+#endif	/*  */
+	    c0con.bc0con.sam = SJA_SAM;
+	c1con.bc1con.sjw = SJA_SJW;
+
+	    // calculate errors for all baudrates
+	    index = 0;
+	for (clk = 0; clk < 5; clk++) {
+		for (brp = 0; brp < 16; brp++) {
+			for (pr = 0; pr < 8; pr++) {
+				for (ph1 = 0; ph1 < 8; ph1++) {
+					for (ph2 = 0; ph2 < 8; ph2++) {
+						baudrate_error[index] =
+						    100 *
+						    abs(baudrate_m16c
+							(clk, brp, pr, ph1,
+							 ph2) -
+							sjaBaudrate) /
+						    sjaBaudrate;
+						samplepoint_error[index] =
+						    abs(samplepoint_m16c
+							(brp, pr, ph1,
+							 ph2) -
+							sjaSamplepoint);
+
+#if 0
+						    info
+						    ("Baudrate      : %d kBaud\n",
+						     baudrate_m16c(clk,
+								   brp, pr,
+								   ph1,
+								   ph2));
+						info
+						    ("Baudrate Error: %d\n",
+						     baudrate_error
+						     [index]);
+						info
+						    ("Sample P Error: %d\n",
+						     samplepoint_error
+						     [index]);
+						info
+						    ("clk           : %d\n",
+						     clk);
+
+#endif	/*  */
+						    index++;
+					}
+				}
+			}
+		}
+	}
+
+	    // mark all baudrate_error entries which are outer limits
+	    index = 0;
+	for (clk = 0; clk < 5; clk++) {
+		for (brp = 0; brp < 16; brp++) {
+			for (pr = 0; pr < 8; pr++) {
+				for (ph1 = 0; ph1 < 8; ph1++) {
+					for (ph2 = 0; ph2 < 8; ph2++) {
+						if ((baudrate_error[index]
+						      >
+						      BAUDRATE_TOLERANCE_PERCENT)
+						     ||
+						     (samplepoint_error
+						       [index] >
+						       SAMPLEPOINT_TOLERANCE_PERCENT)
+						     ||
+						     (samplepoint_m16c
+						       (brp, pr, ph1,
+							ph2) >
+						       SAMPLEPOINT_UPPER_LIMIT))
+						{
+							baudrate_error
+							    [index] = -1;
+						} else
+						    if (((1 + pr + 1 +
+							  ph1 + 1 + ph2 +
+							  1) < 8)
+							||
+							((1 + pr + 1 +
+							  ph1 + 1 + ph2 +
+							  1) > 25)) {
+							baudrate_error
+							    [index] = -1;
+						}
+
+#if 0
+						    else {
+							info
+							    ("Baudrate      : %d kBaud\n",
+							     baudrate_m16c
+							     (clk, brp, pr,
+							      ph1, ph2));
+							info
+							    ("Baudrate Error: %d\n",
+							     baudrate_error
+							     [index]);
+							info
+							    ("Sample P Error: %d\n",
+							     samplepoint_error
+							     [index]);
+						}
+
+#endif	/*  */
+						    index++;
+					}
+				}
+			}
+		}
+	}
+
+	    // find list of minimum of baudrate_error within unmarked entries
+	    clk_merk = brp_merk = pr_merk = ph1_merk = ph2_merk = 0;
+	baudrate_error_merk = 100;
+	index = 0;
+	for (clk = 0; clk < 5; clk++) {
+		for (brp = 0; brp < 16; brp++) {
+			for (pr = 0; pr < 8; pr++) {
+				for (ph1 = 0; ph1 < 8; ph1++) {
+					for (ph2 = 0; ph2 < 8; ph2++) {
+						if (baudrate_error[index]
+						     != -1) {
+							if (baudrate_error
+							     [index] <
+							     baudrate_error_merk)
+							{
+								baudrate_error_merk
+								    =
+								    baudrate_error
+								    [index];
+								brp_merk =
+								    brp;
+								pr_merk =
+								    pr;
+								ph1_merk =
+								    ph1;
+								ph2_merk =
+								    ph2;
+								clk_merk =
+								    clk;
+
+#if 0
+								    info
+								    ("brp: %2.2Xh pr: %2.2Xh ph1: %2.2Xh ph2: %2.2Xh\n",
+								     brp,
+								     pr,
+								     ph1,
+								     ph2);
+								info
+								    ("Baudrate      : %d kBaud\n",
+								     baudrate_m16c
+								     (clk,
+								      brp,
+								      pr,
+								      ph1,
+								      ph2));
+								info
+								    ("Baudrate Error: %d\n",
+								     baudrate_error
+								     [index]);
+								info
+								    ("Sample P Error: %d\n",
+								     samplepoint_error
+								     [index]);
+
+#endif	/*  */
+							}
+						}
+						index++;
+					}
+				}
+			}
+		}
+	}
+	if (baudrate_error_merk == 100) {
+		info("ERROR: Could not convert CAN init parameter\n");
+		vfree(baudrate_error);
+		vfree(samplepoint_error);
+		return -1;
+	}
+
+	    // setting m16c CAN parameter
+	    c0con.bc0con.brp = brp_merk;
+	c0con.bc0con.pr = pr_merk;
+	c1con.bc1con.ph1 = ph1_merk;
+	c1con.bc1con.ph2 = ph2_merk;
+
+#ifdef _DEBUG_OUTPUT_CAN_PARAMS
+	    info("\nResulting M16C CAN params\n");
+	info("-------------------------\n");
+	info("clk     : %2.2Xh\n", clk_merk);
+	info("ph1     : %2.2Xh ph2: %2.2Xh\n", c1con.bc1con.ph1 + 1,
+	      c1con.bc1con.ph2 + 1);
+	info("pr      : %2.2Xh brp: %2.2Xh\n", c0con.bc0con.pr + 1,
+	      c0con.bc0con.brp + 1);
+	info("sjw     : %2.2Xh sam: %2.2Xh\n", c1con.bc1con.sjw,
+	      c0con.bc0con.sam);
+	info("co1     : %2.2Xh co0: %2.2Xh\n", c1con.c1con, c0con.c0con);
+	info("Baudrate: %d.%dBaud\n",
+	       baudrate_m16c(clk_merk, c0con.bc0con.brp, c0con.bc0con.pr,
+			     c1con.bc1con.ph1, c1con.bc1con.ph2) / 1000,
+	       baudrate_m16c(clk_merk, c0con.bc0con.brp, c0con.bc0con.pr,
+			      c1con.bc1con.ph1, c1con.bc1con.ph2) % 1000);
+	info("Sample P: 0.%d\n",
+	      samplepoint_m16c(c0con.bc0con.brp, c0con.bc0con.pr,
+			       c1con.bc1con.ph1, c1con.bc1con.ph2));
+	info("\n");
+
+#endif	/*  */
+	    out = in;
+	out->type = 6;
+	out->length = sizeof(CPC_M16C_BASIC_PARAMS_T) + 1;
+	out->msg.canparams.cc_type = M16C_BASIC;
+	out->msg.canparams.cc_params.m16c_basic.con0 = c0con.c0con;
+	out->msg.canparams.cc_params.m16c_basic.con1 = c1con.c1con;
+	out->msg.canparams.cc_params.m16c_basic.ctlr0 = 0x4C;
+	out->msg.canparams.cc_params.m16c_basic.ctlr1 = 0x00;
+	out->msg.canparams.cc_params.m16c_basic.clk = clk_merk;
+	out->msg.canparams.cc_params.m16c_basic.acc_std_code0 =
+	    acc_code0;
+	out->msg.canparams.cc_params.m16c_basic.acc_std_code1 = acc_code1;
+
+//      info("code0: 0x%2.2X, code1: 0x%2.2X\n", out->msg.canparams.cc_params.m16c_basic.acc_std_code0, out->msg.canparams.cc_params.m16c_basic.acc_std_code1);
+	    tmpAccCode = (acc_code1 >> 5) + (acc_code0 << 3);
+	out->msg.canparams.cc_params.m16c_basic.acc_std_code0 =
+	    (unsigned char) tmpAccCode;
+	out->msg.canparams.cc_params.m16c_basic.acc_std_code1 =
+	    (unsigned char) (tmpAccCode >> 8);
+
+//      info("code0: 0x%2.2X, code1: 0x%2.2X\n", out->msg.canparams.cc_params.m16c_basic.acc_std_code0, out->msg.canparams.cc_params.m16c_basic.acc_std_code1);
+	    out->msg.canparams.cc_params.m16c_basic.acc_std_mask0 =
+	    ~acc_mask0;
+	out->msg.canparams.cc_params.m16c_basic.acc_std_mask1 =
+	    ~acc_mask1;
+
+//      info("mask0: 0x%2.2X, mask1: 0x%2.2X\n", out->msg.canparams.cc_params.m16c_basic.acc_std_mask0, out->msg.canparams.cc_params.m16c_basic.acc_std_mask1);
+	    tmpAccMask = ((acc_mask1) >> 5) + ((acc_mask0) << 3);
+
+//      info("tmpAccMask: 0x%4.4X\n", tmpAccMask);
+	    out->msg.canparams.cc_params.m16c_basic.acc_std_mask0 =
+	    (unsigned char) ~tmpAccMask;
+	out->msg.canparams.cc_params.m16c_basic.acc_std_mask1 =
+	    (unsigned char) ~(tmpAccMask >> 8);
+
+//      info("mask0: 0x%2.2X, mask1: 0x%2.2X\n", out->msg.canparams.cc_params.m16c_basic.acc_std_mask0, out->msg.canparams.cc_params.m16c_basic.acc_std_mask1);
+	    out->msg.canparams.cc_params.m16c_basic.acc_ext_code0 =
+	    (unsigned char) tmpAccCode;
+	out->msg.canparams.cc_params.m16c_basic.acc_ext_code1 =
+	    (unsigned char) (tmpAccCode >> 8);
+	out->msg.canparams.cc_params.m16c_basic.acc_ext_code2 = acc_code2;
+	out->msg.canparams.cc_params.m16c_basic.acc_ext_code3 = acc_code3;
+	out->msg.canparams.cc_params.m16c_basic.acc_ext_mask0 =
+	    (unsigned char) ~tmpAccMask;
+	out->msg.canparams.cc_params.m16c_basic.acc_ext_mask1 =
+	    (unsigned char) ~(tmpAccMask >> 8);
+	out->msg.canparams.cc_params.m16c_basic.acc_ext_mask2 =
+	    ~acc_mask2;
+	out->msg.canparams.cc_params.m16c_basic.acc_ext_mask3 =
+	    ~acc_mask3;
+	vfree(baudrate_error);
+	vfree(samplepoint_error);
+	return 0;
+}
+
+
diff --git a/drivers/staging/echo/echo.c b/drivers/staging/echo/echo.c
index 6d7217e1bd0..79d15c65bfe 100644
--- a/drivers/staging/echo/echo.c
+++ b/drivers/staging/echo/echo.c
@@ -395,7 +395,7 @@ int16_t oslec_update(struct oslec_state *ec, int16_t tx, int16_t rx)
 		old = (int)ec->fir_state.history[ec->fir_state.curr_pos] *
 		    (int)ec->fir_state.history[ec->fir_state.curr_pos];
 		ec->Pstates +=
-		    ((new - old) + (1 << ec->log2taps)) >> ec->log2taps;
+		    ((new - old) + (1 << (ec->log2taps-1))) >> ec->log2taps;
 		if (ec->Pstates < 0)
 			ec->Pstates = 0;
 	}
diff --git a/drivers/staging/epl/EplSdoUdpu.c b/drivers/staging/epl/EplSdoUdpu.c
index b409c9b7be4..c8e950fa835 100644
--- a/drivers/staging/epl/EplSdoUdpu.c
+++ b/drivers/staging/epl/EplSdoUdpu.c
@@ -334,7 +334,8 @@ tEplKernel EplSdoUdpuConfig(unsigned long ulIpAddr_p, unsigned int uiPort_p)
 	}
 	// create Listen-Thread
 	SdoUdpInstance_g.m_ThreadHandle =
-	    kernel_thread(EplSdoUdpThread, &SdoUdpInstance_g, CLONE_KERNEL);
+		kernel_thread(EplSdoUdpThread, &SdoUdpInstance_g,
+				CLONE_FS | CLONE_FILES);
 	if (SdoUdpInstance_g.m_ThreadHandle == 0) {
 		Ret = kEplSdoUdpThreadError;
 		goto Exit;
diff --git a/drivers/staging/epl/ShbIpc-LinuxKernel.c b/drivers/staging/epl/ShbIpc-LinuxKernel.c
index 497938bd09b..12d1eccde25 100644
--- a/drivers/staging/epl/ShbIpc-LinuxKernel.c
+++ b/drivers/staging/epl/ShbIpc-LinuxKernel.c
@@ -532,8 +532,8 @@ tShbError ShbIpcStartSignalingNewData(tShbInstance pShbInstance_p,
 
 	//create thread for signalling new data
 	pShbMemInst->m_tThreadNewDataId =
-	    kernel_thread(ShbIpcThreadSignalNewData, pShbInstance_p,
-			  CLONE_KERNEL);
+		kernel_thread(ShbIpcThreadSignalNewData, pShbInstance_p,
+				CLONE_FS | CLONE_FILES);
 
       Exit:
 	return ShbError;
@@ -636,8 +636,8 @@ tShbError ShbIpcStartSignalingJobReady(tShbInstance pShbInstance_p,
 	pShbMemHeader->m_fJobReady = FALSE;
 	//create thread for signalling new data
 	pShbMemInst->m_tThreadJobReadyId =
-	    kernel_thread(ShbIpcThreadSignalJobReady, pShbInstance_p,
-			  CLONE_KERNEL);
+		kernel_thread(ShbIpcThreadSignalJobReady, pShbInstance_p,
+				CLONE_FS | CLONE_FILES);
       Exit:
 	return ShbError;
 }
diff --git a/drivers/staging/frontier/alphatrack.c b/drivers/staging/frontier/alphatrack.c
index bcba17eae92..15aed87fe1b 100644
--- a/drivers/staging/frontier/alphatrack.c
+++ b/drivers/staging/frontier/alphatrack.c
@@ -39,7 +39,6 @@
 #include <linux/module.h>
 #include <linux/kobject.h>
 #include <linux/mutex.h>
-#include <linux/version.h>
 
 #include <linux/uaccess.h>
 #include <linux/input.h>
diff --git a/drivers/staging/frontier/tranzport.c b/drivers/staging/frontier/tranzport.c
index 274b82bd786..ef8fcc8c67b 100644
--- a/drivers/staging/frontier/tranzport.c
+++ b/drivers/staging/frontier/tranzport.c
@@ -38,7 +38,6 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
-#include <linux/version.h>
 
 #include <linux/uaccess.h>
 #include <linux/input.h>
diff --git a/drivers/staging/go7007/wis-sony-tuner.c b/drivers/staging/go7007/wis-sony-tuner.c
index c965c601ac9..086896cec49 100644
--- a/drivers/staging/go7007/wis-sony-tuner.c
+++ b/drivers/staging/go7007/wis-sony-tuner.c
@@ -370,7 +370,7 @@ static int set_if(struct i2c_client *client)
 	i2c_transfer(client->adapter, &msg, 1);
 
 	/* Select MPX mode if not forced by the user */
-	if (force_mpx_mode >= 0 || force_mpx_mode < MPX_NUM_MODES)
+	if (force_mpx_mode >= 0 && force_mpx_mode < MPX_NUM_MODES)
 		t->mpxmode = force_mpx_mode;
 	else
 		t->mpxmode = default_mpx_mode;
diff --git a/drivers/staging/heci/heci.h b/drivers/staging/heci/heci.h
index 14192e0cc22..48f120dc3b2 100644
--- a/drivers/staging/heci/heci.h
+++ b/drivers/staging/heci/heci.h
@@ -41,7 +41,6 @@
 #ifndef _HECI_H_
 #define _HECI_H_
 
-#include <linux/version.h>
 #include <linux/spinlock.h>
 #include <linux/list.h>
 #include <linux/pci.h>
diff --git a/drivers/staging/heci/heci_data_structures.h b/drivers/staging/heci/heci_data_structures.h
index 575e8f8e88a..ff30386d097 100644
--- a/drivers/staging/heci/heci_data_structures.h
+++ b/drivers/staging/heci/heci_data_structures.h
@@ -41,7 +41,6 @@
 #ifndef _HECI_DATA_STRUCTURES_H_
 #define _HECI_DATA_STRUCTURES_H_
 
-#include <linux/version.h>
 #include <linux/spinlock.h>
 #include <linux/list.h>
 #include <linux/pci.h>
diff --git a/drivers/staging/heci/heci_init.c b/drivers/staging/heci/heci_init.c
index a8a0da910cf..31fd891c099 100644
--- a/drivers/staging/heci/heci_init.c
+++ b/drivers/staging/heci/heci_init.c
@@ -249,7 +249,7 @@ int heci_hw_init(struct iamt_heci_device *dev)
 
 	if ((dev->host_hw_state & H_IS) == H_IS) {
 		/* acknowledge interrupt and stop interupts */
-		heci_set_csr_register(dev);
+		heci_csr_clear_his(dev);
 	}
 	dev->recvd_msg = 0;
 	DBG("reset in start the heci device.\n");
@@ -354,7 +354,7 @@ void heci_reset(struct iamt_heci_device *dev, int interrupts)
 	dev->host_hw_state &= ~H_RST;
 	dev->host_hw_state |= H_IG;
 
-	write_heci_register(dev, H_CSR, dev->host_hw_state);
+	heci_set_csr_register(dev);
 
 	DBG("currently saved host_hw_state = 0x%08x.\n",
 	    dev->host_hw_state);
@@ -998,8 +998,12 @@ int heci_disconnect_host_client(struct iamt_heci_device *dev,
 	if ((!dev) || (!file_ext))
 		return -ENODEV;
 
-	if (file_ext->state != HECI_FILE_DISCONNECTING)
+	spin_lock_bh(&dev->device_lock);
+	if (file_ext->state != HECI_FILE_DISCONNECTING) {
+		spin_unlock_bh(&dev->device_lock);
 		return 0;
+	}
+	spin_unlock_bh(&dev->device_lock);
 
 	priv_cb = kzalloc(sizeof(struct heci_cb_private), GFP_KERNEL);
 	if (!priv_cb)
@@ -1012,6 +1016,7 @@ int heci_disconnect_host_client(struct iamt_heci_device *dev,
 	if (dev->host_buffer_is_empty) {
 		dev->host_buffer_is_empty = 0;
 		if (heci_disconnect(dev, file_ext)) {
+			mdelay(10); /* Wait for hardware disconnection ready */
 			list_add_tail(&priv_cb->cb_list,
 				&dev->ctrl_rd_list.heci_cb.cb_list);
 		} else {
@@ -1030,6 +1035,8 @@ int heci_disconnect_host_client(struct iamt_heci_device *dev,
 	err = wait_event_timeout(dev->wait_recvd_msg,
 		 (HECI_FILE_DISCONNECTED == file_ext->state),
 		 timeout * HZ);
+
+	spin_lock_bh(&dev->device_lock);
 	if (HECI_FILE_DISCONNECTED == file_ext->state) {
 		rets = 0;
 		DBG("successfully disconnected from fw client.\n");
@@ -1044,7 +1051,6 @@ int heci_disconnect_host_client(struct iamt_heci_device *dev,
 		DBG("failed to disconnect from fw client.\n");
 	}
 
-	spin_lock_bh(&dev->device_lock);
 	heci_flush_list(&dev->ctrl_rd_list, file_ext);
 	heci_flush_list(&dev->ctrl_wr_list, file_ext);
 	spin_unlock_bh(&dev->device_lock);
diff --git a/drivers/staging/heci/heci_interface.c b/drivers/staging/heci/heci_interface.c
index c5f51a7ddf2..03e1df1a88a 100644
--- a/drivers/staging/heci/heci_interface.c
+++ b/drivers/staging/heci/heci_interface.c
@@ -44,12 +44,15 @@
 
 
 /**
- * heci_set_csr_register - write H_CSR register to the heci device
+ * heci_set_csr_register - write H_CSR register to the heci device,
+ * and ignore the H_IS bit for it is write-one-to-zero.
  *
  * @dev: device object for our driver
  */
 void heci_set_csr_register(struct iamt_heci_device *dev)
 {
+	if ((dev->host_hw_state & H_IS) == H_IS)
+		dev->host_hw_state &= ~H_IS;
 	write_heci_register(dev, H_CSR, dev->host_hw_state);
 	dev->host_hw_state = read_heci_register(dev, H_CSR);
 }
@@ -76,6 +79,16 @@ void heci_csr_disable_interrupts(struct iamt_heci_device *dev)
 	heci_set_csr_register(dev);
 }
 
+/**
+ * heci_csr_clear_his - clear H_IS bit in H_CSR
+ *
+ * @dev: device object for our driver
+ */
+void heci_csr_clear_his(struct iamt_heci_device *dev)
+{
+	write_heci_register(dev, H_CSR, dev->host_hw_state);
+	dev->host_hw_state = read_heci_register(dev, H_CSR);
+}
 
 /**
  * _host_get_filled_slots - get number of device filled buffer slots
@@ -185,7 +198,7 @@ int heci_write_message(struct iamt_heci_device *dev,
 	}
 
 	dev->host_hw_state |= H_IG;
-	write_heci_register(dev, H_CSR, dev->host_hw_state);
+	heci_set_csr_register(dev);
 	dev->me_hw_state = read_heci_register(dev, ME_CSR_HA);
 	if ((dev->me_hw_state & ME_RDY_HRA) != ME_RDY_HRA)
 		return 0;
diff --git a/drivers/staging/heci/heci_interface.h b/drivers/staging/heci/heci_interface.h
index 37336ebc0a5..34db7e52b8e 100644
--- a/drivers/staging/heci/heci_interface.h
+++ b/drivers/staging/heci/heci_interface.h
@@ -42,7 +42,6 @@
 #ifndef _HECI_INTERFACE_H_
 #define _HECI_INTERFACE_H_
 
-#include <linux/version.h>
 #include <linux/spinlock.h>
 #include <linux/list.h>
 #include <linux/pci.h>
@@ -134,6 +133,7 @@ enum client_disconnect_status_types{
 void heci_set_csr_register(struct iamt_heci_device *dev);
 void heci_csr_enable_interrupts(struct iamt_heci_device *dev);
 void heci_csr_disable_interrupts(struct iamt_heci_device *dev);
+void heci_csr_clear_his(struct iamt_heci_device *dev);
 
 void heci_read_slots(struct iamt_heci_device *dev,
 		     unsigned char *buffer, unsigned long buffer_length);
diff --git a/drivers/staging/heci/heci_main.c b/drivers/staging/heci/heci_main.c
index 00e44c78142..ddf48227e35 100644
--- a/drivers/staging/heci/heci_main.c
+++ b/drivers/staging/heci/heci_main.c
@@ -751,7 +751,9 @@ static int heci_open(struct inode *inode, struct file *file)
 		(1 << (file_ext->host_client_id % 8));
 	spin_unlock_bh(&dev->device_lock);
 	spin_lock(&file_ext->file_lock);
+	spin_lock_bh(&dev->device_lock);
 	file_ext->state = HECI_FILE_INITIALIZING;
+	spin_unlock_bh(&dev->device_lock);
 	file_ext->sm_state = 0;
 
 	file->private_data = file_ext;
@@ -785,8 +787,10 @@ static int heci_release(struct inode *inode, struct file *file)
 
 	if (file_ext != &dev->iamthif_file_ext) {
 		spin_lock(&file_ext->file_lock);
+		spin_lock_bh(&dev->device_lock);
 		if (file_ext->state == HECI_FILE_CONNECTED) {
 			file_ext->state = HECI_FILE_DISCONNECTING;
+			spin_unlock_bh(&dev->device_lock);
 			spin_unlock(&file_ext->file_lock);
 			DBG("disconnecting client host client = %d, "
 			    "ME client = %d\n",
@@ -794,8 +798,8 @@ static int heci_release(struct inode *inode, struct file *file)
 			    file_ext->me_client_id);
 			rets = heci_disconnect_host_client(dev, file_ext);
 			spin_lock(&file_ext->file_lock);
+			spin_lock_bh(&dev->device_lock);
 		}
-		spin_lock_bh(&dev->device_lock);
 		heci_flush_queues(dev, file_ext);
 		DBG("remove client host client = %d, ME client = %d\n",
 		    file_ext->host_client_id,
@@ -954,11 +958,11 @@ static ssize_t heci_read(struct file *file, char __user *ubuf,
 		goto out;
 	}
 
-	spin_lock(&file_ext->read_io_lock);
 	err = heci_start_read(dev, if_num, file_ext);
+	spin_lock_bh(&file_ext->read_io_lock);
 	if (err != 0 && err != -EBUSY) {
 		DBG("heci start read failure with status = %d\n", err);
-		spin_unlock(&file_ext->read_io_lock);
+		spin_unlock_bh(&file_ext->read_io_lock);
 		rets = err;
 		goto out;
 	}
@@ -966,10 +970,10 @@ static ssize_t heci_read(struct file *file, char __user *ubuf,
 			&& !waitqueue_active(&file_ext->rx_wait)) {
 		if (file->f_flags & O_NONBLOCK) {
 			rets = -EAGAIN;
-			spin_unlock(&file_ext->read_io_lock);
+			spin_unlock_bh(&file_ext->read_io_lock);
 			goto out;
 		}
-		spin_unlock(&file_ext->read_io_lock);
+		spin_unlock_bh(&file_ext->read_io_lock);
 
 		if (wait_event_interruptible(file_ext->rx_wait,
 			(HECI_READ_COMPLETE == file_ext->reading_state
@@ -983,26 +987,29 @@ static ssize_t heci_read(struct file *file, char __user *ubuf,
 			return -ERESTARTSYS;
 		}
 
+		spin_lock_bh(&dev->device_lock);
 		if (HECI_FILE_INITIALIZING == file_ext->state ||
 		    HECI_FILE_DISCONNECTED == file_ext->state ||
 		    HECI_FILE_DISCONNECTING == file_ext->state) {
+			spin_unlock_bh(&dev->device_lock);
 			rets = -EBUSY;
 			goto out;
 		}
-		spin_lock(&file_ext->read_io_lock);
+		spin_unlock_bh(&dev->device_lock);
+		spin_lock_bh(&file_ext->read_io_lock);
 	}
 
 	priv_cb = file_ext->read_cb;
 
 	if (!priv_cb) {
-		spin_unlock(&file_ext->read_io_lock);
+		spin_unlock_bh(&file_ext->read_io_lock);
 		return -ENODEV;
 	}
 	if (file_ext->reading_state != HECI_READ_COMPLETE) {
-		spin_unlock(&file_ext->read_io_lock);
+		spin_unlock_bh(&file_ext->read_io_lock);
 		return 0;
 	}
-	spin_unlock(&file_ext->read_io_lock);
+	spin_unlock_bh(&file_ext->read_io_lock);
 	/* now copy the data to user space */
 copy_buffer:
 	DBG("priv_cb->response_buffer size - %d\n",
@@ -1040,11 +1047,11 @@ free:
 		list_del(&priv_cb_pos->cb_list);
 	spin_unlock_bh(&dev->device_lock);
 	heci_free_cb_private(priv_cb);
-	spin_lock(&file_ext->read_io_lock);
+	spin_lock_bh(&file_ext->read_io_lock);
 	file_ext->reading_state = HECI_IDLE;
 	file_ext->read_cb = NULL;
 	file_ext->read_pending = 0;
-	spin_unlock(&file_ext->read_io_lock);
+	spin_unlock_bh(&file_ext->read_io_lock);
 out:	DBG("end heci read rets= %d\n", rets);
 	return rets;
 }
@@ -1088,7 +1095,7 @@ static ssize_t heci_write(struct file *file, const char __user *ubuf,
 	if (file_ext == &dev->iamthif_file_ext) {
 		priv_write_cb = find_pthi_read_list_entry(dev, file);
 		if ((priv_write_cb != NULL) &&
-		     (((currtime - priv_write_cb->read_time) >
+		     (((currtime - priv_write_cb->read_time) >=
 			    IAMTHIF_READ_TIMER) ||
 		      (file_ext->reading_state == HECI_READ_COMPLETE))) {
 			(*offset) = 0;
@@ -1106,11 +1113,11 @@ static ssize_t heci_write(struct file *file, const char __user *ubuf,
 			list_del(&priv_write_cb->cb_list);
 			heci_free_cb_private(priv_write_cb);
 			priv_write_cb = NULL;
-			spin_lock(&file_ext->read_io_lock);
+			spin_lock_bh(&file_ext->read_io_lock);
 			file_ext->reading_state = HECI_IDLE;
 			file_ext->read_cb = NULL;
 			file_ext->read_pending = 0;
-			spin_unlock(&file_ext->read_io_lock);
+			spin_unlock_bh(&file_ext->read_io_lock);
 		}
 	} else if (file_ext->reading_state == HECI_IDLE &&
 			file_ext->read_pending == 0)
@@ -1140,9 +1147,12 @@ static ssize_t heci_write(struct file *file, const char __user *ubuf,
 	spin_lock(&file_ext->file_lock);
 	file_ext->sm_state = 0;
 	if ((length == 4) &&
-	    ((memcmp(heci_wd_state_independence_msg[0], ubuf, 4) == 0) ||
-	     (memcmp(heci_wd_state_independence_msg[1], ubuf, 4) == 0) ||
-	     (memcmp(heci_wd_state_independence_msg[2], ubuf, 4) == 0)))
+	    ((memcmp(heci_wd_state_independence_msg[0],
+				 priv_write_cb->request_buffer.data, 4) == 0) ||
+	     (memcmp(heci_wd_state_independence_msg[1],
+				 priv_write_cb->request_buffer.data, 4) == 0) ||
+	     (memcmp(heci_wd_state_independence_msg[2],
+				 priv_write_cb->request_buffer.data, 4) == 0)))
 		file_ext->sm_state |= HECI_WD_STATE_INDEPENDENCE_MSG_SENT;
 	spin_unlock(&file_ext->file_lock);
 
@@ -1222,6 +1232,7 @@ static ssize_t heci_write(struct file *file, const char __user *ubuf,
 	priv_write_cb->request_buffer.size = length;
 
 	spin_lock(&file_ext->write_io_lock);
+	spin_lock_bh(&dev->device_lock);
 	DBG("host client = %d, ME client = %d\n",
 	    file_ext->host_client_id, file_ext->me_client_id);
 	if (file_ext->state != HECI_FILE_CONNECTED) {
@@ -1229,7 +1240,7 @@ static ssize_t heci_write(struct file *file, const char __user *ubuf,
 		DBG("host client = %d,  is not connected to ME client = %d",
 		    file_ext->host_client_id,
 		    file_ext->me_client_id);
-
+		spin_unlock_bh(&dev->device_lock);
 		goto unlock;
 	}
 	for (i = 0; i < dev->num_heci_me_clients; i++) {
@@ -1240,15 +1251,16 @@ static ssize_t heci_write(struct file *file, const char __user *ubuf,
 	BUG_ON(dev->me_clients[i].client_id != file_ext->me_client_id);
 	if (i == dev->num_heci_me_clients) {
 		rets = -ENODEV;
+		spin_unlock_bh(&dev->device_lock);
 		goto unlock;
 	}
 	if (length > dev->me_clients[i].props.max_msg_length || length <= 0) {
 		rets = -EINVAL;
+		spin_unlock_bh(&dev->device_lock);
 		goto unlock;
 	}
 	priv_write_cb->file_private = file_ext;
 
-	spin_lock_bh(&dev->device_lock);
 	if (flow_ctrl_creds(dev, file_ext) &&
 		dev->host_buffer_is_empty) {
 		spin_unlock_bh(&dev->device_lock);
diff --git a/drivers/staging/heci/interrupt.c b/drivers/staging/heci/interrupt.c
index aacd2624398..2a3a01a62bb 100644
--- a/drivers/staging/heci/interrupt.c
+++ b/drivers/staging/heci/interrupt.c
@@ -92,6 +92,9 @@ irqreturn_t heci_isr_interrupt(int irq, void *dev_id)
 	/* disable interrupts */
 	heci_csr_disable_interrupts(dev);
 
+	/* clear H_IS bit in H_CSR */
+	heci_csr_clear_his(dev);
+
 	/*
 	 * Our device interrupted, schedule work the heci_bh_handler
 	 * to handle the interrupt processing. This needs to be a
@@ -100,10 +103,8 @@ irqreturn_t heci_isr_interrupt(int irq, void *dev_id)
 	PREPARE_WORK(&dev->work, heci_bh_handler);
 	DBG("schedule work the heci_bh_handler.\n");
 	err = schedule_work(&dev->work);
-	if (!err) {
-		printk(KERN_ERR "heci: schedule the heci_bh_handler"
-		       " failed error=%x\n", err);
-	}
+	if (!err)
+		DBG("heci_bh_handler was already on the workqueue.\n");
 	return IRQ_HANDLED;
 }
 
@@ -251,13 +252,14 @@ end:
 		/* acknowledge interrupt and disable interrupts */
 		heci_csr_disable_interrupts(dev);
 
+		/* clear H_IS bit in H_CSR */
+		heci_csr_clear_his(dev);
+
 		PREPARE_WORK(&dev->work, heci_bh_handler);
 		DBG("schedule work the heci_bh_handler.\n");
 		rets = schedule_work(&dev->work);
-		if (!rets) {
-			printk(KERN_ERR "heci: schedule the heci_bh_handler"
-			       " failed error=%x\n", rets);
-		}
+		if (!rets)
+			DBG("heci_bh_handler was already queued.\n");
 	} else {
 		heci_csr_enable_interrupts(dev);
 	}
@@ -622,7 +624,7 @@ static int heci_bh_read_client_message(struct io_heci_list *complete_list,
 				priv_cb_pos->file_private;
 		if ((file_ext != NULL) &&
 		    (_heci_bh_state_ok(file_ext, heci_hdr))) {
-			spin_lock(&file_ext->read_io_lock);
+			spin_lock_bh(&file_ext->read_io_lock);
 			file_ext->reading_state = HECI_READING;
 			buffer = (unsigned char *)
 				(priv_cb_pos->response_buffer.data +
@@ -636,7 +638,7 @@ static int heci_bh_read_client_message(struct io_heci_list *complete_list,
 					priv_cb_pos->information) {
 				DBG("message overflow.\n");
 				list_del(&priv_cb_pos->cb_list);
-				spin_unlock(&file_ext->read_io_lock);
+				spin_unlock_bh(&file_ext->read_io_lock);
 				return -ENOMEM;
 			}
 			if (buffer) {
@@ -647,7 +649,7 @@ static int heci_bh_read_client_message(struct io_heci_list *complete_list,
 			if (heci_hdr->msg_complete) {
 				file_ext->status = 0;
 				list_del(&priv_cb_pos->cb_list);
-				spin_unlock(&file_ext->read_io_lock);
+				spin_unlock_bh(&file_ext->read_io_lock);
 				DBG("completed read host client = %d,"
 					"ME client = %d, "
 					"data length = %lu\n",
@@ -662,7 +664,7 @@ static int heci_bh_read_client_message(struct io_heci_list *complete_list,
 				list_add_tail(&priv_cb_pos->cb_list,
 					&complete_list->heci_cb.cb_list);
 			} else {
-				spin_unlock(&file_ext->read_io_lock);
+				spin_unlock_bh(&file_ext->read_io_lock);
 			}
 
 			break;
@@ -1054,7 +1056,7 @@ static int heci_bh_write_handler(struct io_heci_list *cmpl_list,
 				list_del(&priv_cb_pos->cb_list);
 				if ((HECI_WRITING == file_ext->writing_state) &&
 					(priv_cb_pos->major_file_operations ==
-						HECI_WRITING) &&
+						HECI_WRITE) &&
 					(file_ext != &dev->iamthif_file_ext)) {
 					DBG("HECI WRITE COMPLETE\n");
 					file_ext->writing_state =
diff --git a/drivers/staging/heci/io_heci.c b/drivers/staging/heci/io_heci.c
index f7544a7bbbe..1a6faf88e16 100644
--- a/drivers/staging/heci/io_heci.c
+++ b/drivers/staging/heci/io_heci.c
@@ -111,7 +111,7 @@ int heci_ioctl_get_version(struct iamt_heci_device *dev, int if_num,
 
 	rets = file_ext->status;
 	/* now copy the data to user space */
-	if (copy_to_user(k_msg.data, res_msg.data, res_msg.size)) {
+	if (copy_to_user((void __user *)k_msg.data, res_msg.data, res_msg.size)) {
 		rets = -EFAULT;
 		goto end;
 	}
@@ -188,7 +188,7 @@ int heci_ioctl_connect_client(struct iamt_heci_device *dev, int if_num,
 	/* copy the message to kernel space -
 	 * use a pointer already copied into kernel space
 	 */
-	if (copy_from_user(req_msg.data, k_msg.data, k_msg.size)) {
+	if (copy_from_user(req_msg.data, (void __user *)k_msg.data, k_msg.size)) {
 		rets = -EFAULT;
 		goto end;
 	}
@@ -266,7 +266,8 @@ int heci_ioctl_connect_client(struct iamt_heci_device *dev, int if_num,
 		spin_unlock_bh(&dev->device_lock);
 
 		/* now copy the data to user space */
-		if (copy_to_user(k_msg.data, res_msg.data, res_msg.size)) {
+		if (copy_to_user((void __user *)k_msg.data,
+					res_msg.data, res_msg.size)) {
 			rets = -EFAULT;
 			goto end;
 		}
@@ -276,14 +277,16 @@ int heci_ioctl_connect_client(struct iamt_heci_device *dev, int if_num,
 		}
 		goto end;
 	}
+	spin_unlock_bh(&dev->device_lock);
+
 	spin_lock(&file_ext->file_lock);
+	spin_lock_bh(&dev->device_lock);
 	if (file_ext->state != HECI_FILE_CONNECTING) {
 		rets = -ENODEV;
-		spin_unlock(&file_ext->file_lock);
 		spin_unlock_bh(&dev->device_lock);
+		spin_unlock(&file_ext->file_lock);
 		goto end;
 	}
-	spin_unlock(&file_ext->file_lock);
 	/* prepare the output buffer */
 	client = (struct heci_client *) res_msg.data;
 	client->max_msg_length = dev->me_clients[i].props.max_msg_length;
@@ -294,6 +297,7 @@ int heci_ioctl_connect_client(struct iamt_heci_device *dev, int if_num,
 		if (!heci_connect(dev, file_ext)) {
 			rets = -ENODEV;
 			spin_unlock_bh(&dev->device_lock);
+			spin_unlock(&file_ext->file_lock);
 			goto end;
 		} else {
 			file_ext->timer_count = HECI_CONNECT_TIMEOUT;
@@ -311,16 +315,20 @@ int heci_ioctl_connect_client(struct iamt_heci_device *dev, int if_num,
 			      &dev->ctrl_wr_list.heci_cb.cb_list);
 	}
 	spin_unlock_bh(&dev->device_lock);
+	spin_unlock(&file_ext->file_lock);
 	err = wait_event_timeout(dev->wait_recvd_msg,
 			(HECI_FILE_CONNECTED == file_ext->state
 			 || HECI_FILE_DISCONNECTED == file_ext->state),
 			timeout * HZ);
 
+	spin_lock_bh(&dev->device_lock);
 	if (HECI_FILE_CONNECTED == file_ext->state) {
+		spin_unlock_bh(&dev->device_lock);
 		DBG("successfully connected to FW client.\n");
 		rets = file_ext->status;
 		/* now copy the data to user space */
-		if (copy_to_user(k_msg.data, res_msg.data, res_msg.size)) {
+		if (copy_to_user((void __user *)k_msg.data,
+					res_msg.data, res_msg.size)) {
 			rets = -EFAULT;
 			goto end;
 		}
@@ -332,6 +340,7 @@ int heci_ioctl_connect_client(struct iamt_heci_device *dev, int if_num,
 	} else {
 		DBG("failed to connect to FW client.file_ext->state = %d.\n",
 		    file_ext->state);
+		spin_unlock_bh(&dev->device_lock);
 		if (!err) {
 			DBG("wait_event_interruptible_timeout failed on client"
 			    " connect message fw response message.\n");
@@ -394,7 +403,8 @@ int heci_ioctl_wd(struct iamt_heci_device *dev, int if_num,
 	/* copy the message to kernel space - use a pointer already
 	 * copied into kernel space
 	 */
-	if (copy_from_user(req_msg.data, k_msg.data, req_msg.size)) {
+	if (copy_from_user(req_msg.data,
+				(void __user *)k_msg.data, req_msg.size)) {
 		rets = -EFAULT;
 		goto end;
 	}
@@ -464,7 +474,7 @@ int heci_ioctl_bypass_wd(struct iamt_heci_device *dev, int if_num,
 		return -EMSGSIZE;
 	}
 	spin_unlock(&file_ext->file_lock);
-	if (copy_from_user(&flag, k_msg.data, 1)) {
+	if (copy_from_user(&flag, (void __user *)k_msg.data, 1)) {
 		rets = -EFAULT;
 		goto end;
 	}
@@ -631,28 +641,39 @@ int heci_start_read(struct iamt_heci_device *dev, int if_num,
 		DBG("received wrong function input param.\n");
 		return -ENODEV;
 	}
-	if (file_ext->state != HECI_FILE_CONNECTED)
-		return -ENODEV;
 
 	spin_lock_bh(&dev->device_lock);
+	if (file_ext->state != HECI_FILE_CONNECTED) {
+		spin_unlock_bh(&dev->device_lock);
+		return -ENODEV;
+	}
+
 	if (dev->heci_state != HECI_ENABLED) {
 		spin_unlock_bh(&dev->device_lock);
 		return -ENODEV;
 	}
 	spin_unlock_bh(&dev->device_lock);
 	DBG("check if read is pending.\n");
+	spin_lock_bh(&file_ext->read_io_lock);
 	if ((file_ext->read_pending) || (file_ext->read_cb != NULL)) {
 		DBG("read is pending.\n");
+		spin_unlock_bh(&file_ext->read_io_lock);
 		return -EBUSY;
 	}
+	spin_unlock_bh(&file_ext->read_io_lock);
+
 	priv_cb = kzalloc(sizeof(struct heci_cb_private), GFP_KERNEL);
 	if (!priv_cb)
 		return -ENOMEM;
 
+	spin_lock_bh(&file_ext->read_io_lock);
 	DBG("allocation call back success\n"
 	    "host client = %d, ME client = %d\n",
 	    file_ext->host_client_id, file_ext->me_client_id);
+	spin_unlock_bh(&file_ext->read_io_lock);
+
 	spin_lock_bh(&dev->device_lock);
+	spin_lock_bh(&file_ext->read_io_lock);
 	for (i = 0; i < dev->num_heci_me_clients; i++) {
 		if (dev->me_clients[i].client_id == file_ext->me_client_id)
 			break;
@@ -660,6 +681,7 @@ int heci_start_read(struct iamt_heci_device *dev, int if_num,
 	}
 
 	BUG_ON(dev->me_clients[i].client_id != file_ext->me_client_id);
+	spin_unlock_bh(&file_ext->read_io_lock);
 	if (i == dev->num_heci_me_clients) {
 		rets = -ENODEV;
 		goto unlock;
@@ -678,12 +700,14 @@ int heci_start_read(struct iamt_heci_device *dev, int if_num,
 	/* make sure information is zero before we start */
 	priv_cb->information = 0;
 	priv_cb->file_private = (void *) file_ext;
-	file_ext->read_cb = priv_cb;
 	spin_lock_bh(&dev->device_lock);
+	spin_lock_bh(&file_ext->read_io_lock);
+	file_ext->read_cb = priv_cb;
 	if (dev->host_buffer_is_empty) {
 		dev->host_buffer_is_empty = 0;
 		if (!heci_send_flow_control(dev, file_ext)) {
 			rets = -ENODEV;
+			spin_unlock_bh(&file_ext->read_io_lock);
 			goto unlock;
 		} else {
 			list_add_tail(&priv_cb->cb_list,
@@ -693,6 +717,7 @@ int heci_start_read(struct iamt_heci_device *dev, int if_num,
 		list_add_tail(&priv_cb->cb_list,
 			      &dev->ctrl_wr_list.heci_cb.cb_list);
 	}
+	spin_unlock_bh(&file_ext->read_io_lock);
 	spin_unlock_bh(&dev->device_lock);
 	return rets;
 unlock:
diff --git a/drivers/staging/meilhaus/me0600_ext_irq.c b/drivers/staging/meilhaus/me0600_ext_irq.c
index 2f6fedca322..1d098420a54 100644
--- a/drivers/staging/meilhaus/me0600_ext_irq.c
+++ b/drivers/staging/meilhaus/me0600_ext_irq.c
@@ -32,7 +32,6 @@
 /*
  * Includes
  */
-#include <linux/version.h>
 #include <linux/module.h>
 
 #include <linux/slab.h>
@@ -434,11 +433,7 @@ me0600_ext_irq_subdevice_t *me0600_ext_irq_constructor(uint32_t plx_reg_base,
 	subdevice->irq = irq;
 
 	err = request_irq(subdevice->irq, me0600_isr,
-#ifdef IRQF_DISABLED
 			  IRQF_DISABLED | IRQF_SHARED,
-#else
-			  SA_INTERRUPT | SA_SHIRQ,
-#endif
 			  ME0600_NAME, (void *)subdevice);
 
 	if (err) {
diff --git a/drivers/staging/meilhaus/me0900_di.c b/drivers/staging/meilhaus/me0900_di.c
index 4665b2acbea..b8c448f58e3 100644
--- a/drivers/staging/meilhaus/me0900_di.c
+++ b/drivers/staging/meilhaus/me0900_di.c
@@ -38,7 +38,6 @@
 #include <linux/io.h>
 #include <linux/types.h>
 #include <linux/interrupt.h>
-#include <linux/version.h>
 
 #include "medefines.h"
 #include "meinternal.h"
diff --git a/drivers/staging/meilhaus/me1400_device.c b/drivers/staging/meilhaus/me1400_device.c
index ca7498b9056..a018b5f7a19 100644
--- a/drivers/staging/meilhaus/me1400_device.c
+++ b/drivers/staging/meilhaus/me1400_device.c
@@ -47,7 +47,6 @@
 #include <linux/slab.h>
 #include <linux/sched.h>
 #include <linux/interrupt.h>
-#include <linux/version.h>
 
 #include "meids.h"
 #include "meerror.h"
diff --git a/drivers/staging/meilhaus/me1400_ext_irq.c b/drivers/staging/meilhaus/me1400_ext_irq.c
index 0dc6b4519b5..6841f41860a 100644
--- a/drivers/staging/meilhaus/me1400_ext_irq.c
+++ b/drivers/staging/meilhaus/me1400_ext_irq.c
@@ -32,7 +32,6 @@
 /*
  * Includes
  */
-#include <linux/version.h>
 #include <linux/module.h>
 
 #include <linux/slab.h>
@@ -458,11 +457,7 @@ me1400_ext_irq_subdevice_t *me1400_ext_irq_constructor(uint32_t device_id,
 	subdevice->irq = irq;
 
 	err = request_irq(irq, me1400_ext_irq_isr,
-#ifdef IRQF_DISABLED
 			  IRQF_DISABLED | IRQF_SHARED,
-#else
-			  SA_INTERRUPT | SA_SHIRQ,
-#endif
 			  ME1400_NAME, (void *)subdevice);
 
 	if (err) {
diff --git a/drivers/staging/meilhaus/me4600_ai.c b/drivers/staging/meilhaus/me4600_ai.c
index a3cfef09a4d..e496d0c8d48 100644
--- a/drivers/staging/meilhaus/me4600_ai.c
+++ b/drivers/staging/meilhaus/me4600_ai.c
@@ -299,11 +299,7 @@ me4600_ai_subdevice_t *me4600_ai_constructor(uint32_t reg_base,
 	// Register interrupt service routine.
 	subdevice->irq = irq;
 	if (request_irq(subdevice->irq, me4600_ai_isr,
-#ifdef IRQF_DISABLED
 			IRQF_DISABLED | IRQF_SHARED,
-#else
-			SA_INTERRUPT | SA_SHIRQ,
-#endif
 			ME4600_NAME, subdevice)) {
 		PERROR("Cannot register interrupt service routine.\n");
 		me_subdevice_deinit((me_subdevice_t *) subdevice);
diff --git a/drivers/staging/meilhaus/me4600_ai.h b/drivers/staging/meilhaus/me4600_ai.h
index 106e1959f9f..7055e44f32e 100644
--- a/drivers/staging/meilhaus/me4600_ai.h
+++ b/drivers/staging/meilhaus/me4600_ai.h
@@ -28,7 +28,6 @@
 #ifndef _ME4600_AI_H_
 #define _ME4600_AI_H_
 
-#include <linux/version.h>
 #include "mesubdevice.h"
 #include "meioctl.h"
 #include "mecirc_buf.h"
diff --git a/drivers/staging/meilhaus/me4600_ao.c b/drivers/staging/meilhaus/me4600_ao.c
index eb472692a7c..4000dac057e 100644
--- a/drivers/staging/meilhaus/me4600_ao.c
+++ b/drivers/staging/meilhaus/me4600_ao.c
@@ -2567,11 +2567,7 @@ me4600_ao_subdevice_t *me4600_ao_constructor(uint32_t reg_base,
 	if (subdevice->fifo) {
 		subdevice->irq = irq;
 		if (request_irq(subdevice->irq, me4600_ao_isr,
-#ifdef IRQF_DISABLED
 				IRQF_DISABLED | IRQF_SHARED,
-#else
-				SA_INTERRUPT | SA_SHIRQ,
-#endif
 				ME4600_NAME, subdevice)) {
 			PERROR("Cannot get interrupt line.\n");
 			PDEBUG("free circ_buf = %p size=%d",
@@ -5737,7 +5733,7 @@ me4600_ao_subdevice_t *me4600_ao_constructor(uint32_t reg_base,
 	subdevice->irq = irq;
 
 	if (request_irq
-	    (subdevice->irq, me4600_ao_isr, SA_INTERRUPT | SA_SHIRQ,
+	    (subdevice->irq, me4600_ao_isr, IRQF_DISABLED | IRQF_SHARED,
 	     ME4600_NAME, subdevice)) {
 		PERROR("Cannot get interrupt line.\n");
 		me_subdevice_deinit((me_subdevice_t *) subdevice);
diff --git a/drivers/staging/meilhaus/me4600_ext_irq.c b/drivers/staging/meilhaus/me4600_ext_irq.c
index 6b33cba3da8..cfb4adbd41a 100644
--- a/drivers/staging/meilhaus/me4600_ext_irq.c
+++ b/drivers/staging/meilhaus/me4600_ext_irq.c
@@ -39,7 +39,6 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/types.h>
-#include <linux/version.h>
 
 #include "medefines.h"
 #include "meinternal.h"
@@ -420,11 +419,7 @@ me4600_ext_irq_subdevice_t *me4600_ext_irq_constructor(uint32_t reg_base,
 	subdevice->irq = irq;
 
 	if (request_irq(subdevice->irq, me4600_ext_irq_isr,
-#ifdef IRQF_DISABLED
 			IRQF_DISABLED | IRQF_SHARED,
-#else
-			SA_INTERRUPT | SA_SHIRQ,
-#endif
 			ME4600_NAME, subdevice)) {
 		PERROR("Cannot register interrupt.\n");
 		kfree(subdevice);
diff --git a/drivers/staging/meilhaus/me6000_ao.c b/drivers/staging/meilhaus/me6000_ao.c
index f7abdbd485e..66652dc5b96 100644
--- a/drivers/staging/meilhaus/me6000_ao.c
+++ b/drivers/staging/meilhaus/me6000_ao.c
@@ -2627,11 +2627,7 @@ me6000_ao_subdevice_t *me6000_ao_constructor(uint32_t reg_base,
 	if (subdevice->fifo & ME6000_AO_HAS_FIFO) {
 		subdevice->irq = irq;
 		if (request_irq(subdevice->irq, me6000_ao_isr,
-#ifdef IRQF_DISABLED
 				IRQF_DISABLED | IRQF_SHARED,
-#else
-				SA_INTERRUPT | SA_SHIRQ,
-#endif
 				ME6000_NAME, subdevice)) {
 			PERROR("Cannot get interrupt line.\n");
 			PDEBUG("free circ_buf = %p size=%d",
diff --git a/drivers/staging/meilhaus/me6000_ao.h b/drivers/staging/meilhaus/me6000_ao.h
index ef4d0189bde..d86fb29265f 100644
--- a/drivers/staging/meilhaus/me6000_ao.h
+++ b/drivers/staging/meilhaus/me6000_ao.h
@@ -27,7 +27,6 @@
 #ifndef _ME6000_AO_H_
 #define _ME6000_AO_H_
 
-#include <linux/version.h>
 #include "mesubdevice.h"
 #include "mecirc_buf.h"
 #include "meioctl.h"
diff --git a/drivers/staging/meilhaus/me8100_di.c b/drivers/staging/meilhaus/me8100_di.c
index 301dbd8f96a..1a3f2692d7a 100644
--- a/drivers/staging/meilhaus/me8100_di.c
+++ b/drivers/staging/meilhaus/me8100_di.c
@@ -39,7 +39,6 @@
 #include <linux/io.h>
 #include <linux/types.h>
 #include <linux/interrupt.h>
-#include <linux/version.h>
 
 #include "medefines.h"
 #include "meerror.h"
@@ -633,11 +632,7 @@ me8100_di_subdevice_t *me8100_di_constructor(uint32_t me8100_reg_base,
 	/* Register interrupt service routine. */
 	subdevice->irq = irq;
 	err = request_irq(subdevice->irq, me8100_isr,
-#ifdef IRQF_DISABLED
 			  IRQF_DISABLED | IRQF_SHARED,
-#else
-			  SA_INTERRUPT | SA_SHIRQ,
-#endif
 			  ME8100_NAME, (void *)subdevice);
 
 	if (err) {
diff --git a/drivers/staging/meilhaus/me8200_di.c b/drivers/staging/meilhaus/me8200_di.c
index a931fb817c7..fd1af0f0565 100644
--- a/drivers/staging/meilhaus/me8200_di.c
+++ b/drivers/staging/meilhaus/me8200_di.c
@@ -37,7 +37,6 @@
 #include <linux/io.h>
 #include <linux/types.h>
 #include <linux/interrupt.h>
-#include <linux/version.h>
 
 #include "medefines.h"
 #include "meerror.h"
@@ -801,19 +800,11 @@ me8200_di_subdevice_t *me8200_di_constructor(uint32_t me8200_regbase,
 	subdevice->irq = irq;
 	if (subdevice->version > 0) {	// NEW
 		err = request_irq(subdevice->irq, me8200_isr_EX,
-#ifdef IRQF_DISABLED
 				  IRQF_DISABLED | IRQF_SHARED,
-#else
-				  SA_INTERRUPT | SA_SHIRQ,
-#endif
 				  ME8200_NAME, (void *)subdevice);
 	} else {		//OLD
 		err = request_irq(subdevice->irq, me8200_isr,
-#ifdef IRQF_DISABLED
 				  IRQF_DISABLED | IRQF_SHARED,
-#else
-				  SA_INTERRUPT | SA_SHIRQ,
-#endif
 				  ME8200_NAME, (void *)subdevice);
 	}
 
diff --git a/drivers/staging/meilhaus/me8200_do.c b/drivers/staging/meilhaus/me8200_do.c
index 40d536c71d5..e42a137617a 100644
--- a/drivers/staging/meilhaus/me8200_do.c
+++ b/drivers/staging/meilhaus/me8200_do.c
@@ -39,7 +39,6 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/types.h>
-#include <linux/version.h>
 
 #include "medefines.h"
 #include "meinternal.h"
@@ -556,11 +555,7 @@ me8200_do_subdevice_t *me8200_do_constructor(uint32_t reg_base,
 
 	/* Request the interrupt line */
 	err = request_irq(irq, me8200_do_isr,
-#ifdef IRQF_DISABLED
 			  IRQF_DISABLED | IRQF_SHARED,
-#else
-			  SA_INTERRUPT | SA_SHIRQ,
-#endif
 			  ME8200_NAME, (void *)subdevice);
 
 	if (err) {
diff --git a/drivers/staging/meilhaus/memain.c b/drivers/staging/meilhaus/memain.c
index fd9f079b0ed..c4908549192 100644
--- a/drivers/staging/meilhaus/memain.c
+++ b/drivers/staging/meilhaus/memain.c
@@ -38,7 +38,7 @@
 //#include <linux/usb.h>
 #include <linux/errno.h>
 #include <linux/uaccess.h>
-#include <linux/cdev.h>
+#include <linux/miscdevice.h>
 #include <linux/rwsem.h>
 
 #include "medefines.h"
@@ -68,13 +68,6 @@ MODULE_PARM_DESC(me_bosch_fw,
 		 "Flags which signals the ME-4600 driver to load the bosch firmware (default = 0).");
 #endif //BOSCH
 
-static unsigned int major = 0;
-#ifdef module_param
-module_param(major, int, S_IRUGO);
-#else
-MODULE_PARM(major, "i");
-#endif
-
 /* Global Driver Lock
 */
 
@@ -100,29 +93,131 @@ static int me_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
 //static int me_probe_usb(struct usb_interface *interface, const struct usb_device_id *id);
 //static void me_disconnect_usb(struct usb_interface *interface);
 
-/* Character device structure
-*/
-
-static struct cdev *cdevp;
-
 /* File operations provided by the module
 */
 
-static struct file_operations me_file_operations = {
+static const struct file_operations me_file_operations = {
 	.owner = THIS_MODULE,
 	.ioctl = me_ioctl,
 	.open = me_open,
 	.release = me_release,
 };
 
-struct pci_driver me_pci_driver = {
+static const struct pci_device_id me_pci_table[] = {
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME1000) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME1000_A) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME1000_B) },
+
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME1400) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME140A) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME140B) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME14E0) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME14EA) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME14EB) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME140C) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME140D) },
+
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME1600_4U) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME1600_8U) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME1600_12U) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME1600_16U) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME1600_16U_8I) },
+
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4610) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4650) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4660) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4660I) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4670) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4670I) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4670S) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4670IS) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4680) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4680I) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4680S) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4680IS) },
+
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6004) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6008) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME600F) },
+
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6014) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6018) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME601F) },
+
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6034) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6038) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME603F) },
+
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6104) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6108) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME610F) },
+
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6114) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6118) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME611F) },
+
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6134) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6138) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME613F) },
+
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6044) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6048) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME604F) },
+
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6054) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6058) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME605F) },
+
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6074) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6078) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME607F) },
+
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6144) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6148) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME614F) },
+
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6154) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6158) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME615F) },
+
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6174) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6178) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME617F) },
+
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6259) },
+
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6359) },
+
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME0630) },
+
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME8100_A) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME8100_B) },
+
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME8200_A) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME8200_B) },
+
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME0940) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME0950) },
+	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME0960) },
+
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, me_pci_table);
+
+static struct pci_driver me_pci_driver = {
 	.name = MEMAIN_NAME,
 	.id_table = me_pci_table,
 	.probe = me_probe_pci,
-	.remove = me_remove_pci
+	.remove = __devexit_p(me_remove_pci),
 };
 
-/* //me_usb_driver
+/*
+static struct usb_device_id me_usb_table[] = {
+	{ USB_DEVICE(USB_VENDOR_ID_MEPHISTO_S1, USB_DEVICE_ID_MEPHISTO_S1) },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE (usb, me_usb_table);
+
 static struct usb_driver me_usb_driver =
 {
 	.name = MEMAIN_NAME,
@@ -396,7 +491,8 @@ static me_device_t *get_dummy_instance(unsigned short vendor_id,
 	return instance;
 }
 
-static int me_probe_pci(struct pci_dev *dev, const struct pci_device_id *id)
+static int __devinit me_probe_pci(struct pci_dev *dev,
+		const struct pci_device_id *id)
 {
 	int err;
 	me_pci_constructor_t constructor = NULL;
@@ -424,7 +520,7 @@ static int me_probe_pci(struct pci_dev *dev, const struct pci_device_id *id)
 
 	if ((constructor =
 	     (me_pci_constructor_t) symbol_get(constructor_name)) == NULL) {
-		if (request_module(module_name)) {
+		if (request_module("%s", module_name)) {
 			PERROR("Error while request for module %s.\n",
 			       module_name);
 			return -ENODEV;
@@ -594,7 +690,7 @@ static int insert_to_device_list(me_device_t *n_device)
 	return 0;
 }
 
-static void me_remove_pci(struct pci_dev *dev)
+static void __devexit me_remove_pci(struct pci_dev *dev)
 {
 	int vendor_id = dev->vendor;
 	int device_id = dev->device;
@@ -1910,11 +2006,16 @@ static int me_ioctl(struct inode *inodep,
 	return -ENOTTY;
 }
 
+static struct miscdevice me_miscdev = {
+	.minor = MISC_DYNAMIC_MINOR,
+	.name = MEMAIN_NAME,
+	.fops = &me_file_operations,
+};
+
 // Init and exit of module.
 static int memain_init(void)
 {
 	int result = 0;
-	dev_t dev = MKDEV(major, 0);
 
 	PDEBUG("executed.\n");
 
@@ -1943,46 +2044,14 @@ static int memain_init(void)
 		}
 	}
 */
-	// Register the character device.
-	if (major) {
-		result = register_chrdev_region(dev, 1, MEMAIN_NAME);
-	} else {
-		result = alloc_chrdev_region(&dev, 0, 1, MEMAIN_NAME);
-		major = MAJOR(dev);
-	}
-
+	result = misc_register(&me_miscdev);
 	if (result < 0) {
-		PERROR("Can't get major driver no.\n");
+		printk(KERN_ERR MEMAIN_NAME ": can't register misc device\n");
 		goto INIT_ERROR_3;
 	}
 
-	cdevp = cdev_alloc();
-
-	if (!cdevp) {
-		PERROR("Can't get character device structure.\n");
-		result = -ENOMEM;
-		goto INIT_ERROR_4;
-	}
-
-	cdevp->ops = &me_file_operations;
-
-	cdevp->owner = THIS_MODULE;
-
-	result = cdev_add(cdevp, dev, 1);
-
-	if (result < 0) {
-		PERROR("Cannot add character device structure.\n");
-		goto INIT_ERROR_5;
-	}
-
 	return 0;
 
-      INIT_ERROR_5:
-	cdev_del(cdevp);
-
-      INIT_ERROR_4:
-	unregister_chrdev_region(dev, 1);
-
       INIT_ERROR_3:
 //      usb_deregister(&me_usb_driver);
 
@@ -1996,12 +2065,9 @@ static int memain_init(void)
 
 static void __exit memain_exit(void)
 {
-	dev_t dev = MKDEV(major, 0);
-
 	PDEBUG("executed.\n");
 
-	cdev_del(cdevp);
-	unregister_chrdev_region(dev, 1);
+	misc_deregister(&me_miscdev);
 	pci_unregister_driver(&me_pci_driver);
 //      usb_deregister(&me_usb_driver);
 	clear_device_list();
diff --git a/drivers/staging/meilhaus/memain.h b/drivers/staging/meilhaus/memain.h
index 7616ff7f65c..48f83679379 100644
--- a/drivers/staging/meilhaus/memain.h
+++ b/drivers/staging/meilhaus/memain.h
@@ -28,200 +28,6 @@
 #ifdef __KERNEL__
 
 /*=============================================================================
-  PCI device table.
-  This is used by modprobe to translate PCI IDs to drivers.
-  ===========================================================================*/
-
-static struct pci_device_id me_pci_table[] __devinitdata = {
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME1000, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME1000_A, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME1000_B, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME1400, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME140A, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME140B, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME14E0, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME14EA, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME14EB, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME140C, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME140D, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME1600_4U, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME1600_8U, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME1600_12U, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME1600_16U, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME1600_16U_8I,
-	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4610, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4650, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4660, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4660I, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4670, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4670I, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4670S, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4670IS, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4680, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4680I, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4680S, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4680IS, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6004, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6008, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME600F, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6014, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6018, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME601F, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6034, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6038, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME603F, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6104, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6108, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME610F, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6114, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6118, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME611F, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6134, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6138, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME613F, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6044, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6048, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME604F, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6054, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6058, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME605F, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6074, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6078, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME607F, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6144, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6148, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME614F, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6154, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6158, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME615F, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6174, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6178, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME617F, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6259, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6359, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME0630, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME8100_A, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME8100_B, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME8200_A, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME8200_B, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME0940, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME0950, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME0960, PCI_ANY_ID,
-	 PCI_ANY_ID, 0, 0, 0},
-
-	{0}
-};
-
-MODULE_DEVICE_TABLE(pci, me_pci_table);
-
-/*=============================================================================
-  USB device table.
-  This is used by modprobe to translate USB IDs to drivers.
-  ===========================================================================*/
-/*
-static struct usb_device_id me_usb_table[] __devinitdata = {
-	{ USB_DEVICE(USB_VENDOR_ID_MEPHISTO_S1, USB_DEVICE_ID_MEPHISTO_S1) },
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE (usb, me_usb_table);
-*/
-
-/*=============================================================================
   Templates
   ===========================================================================*/
 
diff --git a/drivers/staging/otus/80211core/ccmd.c b/drivers/staging/otus/80211core/ccmd.c
index 47997797367..83dd8ba1328 100644
--- a/drivers/staging/otus/80211core/ccmd.c
+++ b/drivers/staging/otus/80211core/ccmd.c
@@ -27,1019 +27,941 @@
 #include "../hal/hpreg.h"
 
 
-u16_t zfWlanReset(zdev_t* dev);
-u32_t zfUpdateRxRate(zdev_t* dev);
+u16_t zfWlanReset(zdev_t *dev);
+u32_t zfUpdateRxRate(zdev_t *dev);
 
 
 extern void zfiUsbRecv(zdev_t *dev, zbuf_t *buf);
-extern void zfiUsbRegIn(zdev_t* dev, u32_t* rsp, u16_t rspLen);
-extern void zfiUsbOutComplete(zdev_t* dev, zbuf_t *buf, u8_t status, u8_t *hdr);
-extern void zfiUsbRegOutComplete(zdev_t* dev);
-extern u16_t zfHpReinit(zdev_t* dev, u32_t frequency);
+extern void zfiUsbRegIn(zdev_t *dev, u32_t *rsp, u16_t rspLen);
+extern void zfiUsbOutComplete(zdev_t *dev, zbuf_t *buf, u8_t status, u8_t *hdr);
+extern void zfiUsbRegOutComplete(zdev_t *dev);
+extern u16_t zfHpReinit(zdev_t *dev, u32_t frequency);
 
 /* Get size (byte) of driver core global data structure.    */
 /* This size will be used by driver wrapper to allocate     */
 /* a memory space for driver core to store global variables */
-u16_t zfiGlobalDataSize(zdev_t* dev)
+u16_t zfiGlobalDataSize(zdev_t *dev)
 {
-    u32_t ret;
-    ret = (sizeof(struct zsWlanDev));
-    zm_assert((ret>>16) == 0);
-    return (u16_t)ret;
+	u32_t ret;
+	ret = (sizeof(struct zsWlanDev));
+	zm_assert((ret>>16) == 0);
+	return (u16_t)ret;
 }
 
 
 /* Initialize WLAN hardware and software, resource will be allocated */
 /* for WLAN operation, must be called first before other function.   */
-extern u16_t zfiWlanOpen(zdev_t* dev, struct zsCbFuncTbl* cbFuncTbl)
+extern u16_t zfiWlanOpen(zdev_t *dev, struct zsCbFuncTbl *cbFuncTbl)
 {
-    //u16_t ret;
-    //u32_t i;
-    //u8_t* ch;
-    //u8_t  bPassive;
-    u32_t devSize;
-    struct zfCbUsbFuncTbl cbUsbFuncTbl;
-    zmw_get_wlan_dev(dev);
+	/* u16_t ret;
+	   u32_t i;
+	   u8_t* ch;
+	   u8_t  bPassive;
+	*/
+	u32_t devSize;
+	struct zfCbUsbFuncTbl cbUsbFuncTbl;
+	zmw_get_wlan_dev(dev);
 
-    zm_debug_msg0("start");
+	zm_debug_msg0("start");
 
-    devSize = sizeof(struct zsWlanDev);
-    /* Zeroize zsWlanDev struct */
-    zfZeroMemory((u8_t*)wd, (u16_t)devSize);
+	devSize = sizeof(struct zsWlanDev);
+	/* Zeroize zsWlanDev struct */
+	zfZeroMemory((u8_t *)wd, (u16_t)devSize);
 
 #ifdef ZM_ENABLE_AGGREGATION
-    zfAggInit(dev);
+	zfAggInit(dev);
 #endif
 
-    zfCwmInit(dev);
-
-    wd->commTally.RateCtrlTxMPDU = 0;
-    wd->commTally.RateCtrlBAFail = 0;
-    wd->preambleTypeInUsed = ZM_PREAMBLE_TYPE_SHORT;
-
-    if (cbFuncTbl == NULL)
-    {
-        /* zfcbRecvEth() is mandatory */
-        zm_assert(0);
-    }
-    else
-    {
-        if (cbFuncTbl->zfcbRecvEth == NULL)
-        {
-            /* zfcbRecvEth() is mandatory */
-            zm_assert(0);
-        }
-        wd->zfcbAuthNotify = cbFuncTbl->zfcbAuthNotify;
-        wd->zfcbAuthNotify = cbFuncTbl->zfcbAuthNotify;
-        wd->zfcbAsocNotify = cbFuncTbl->zfcbAsocNotify;
-        wd->zfcbDisAsocNotify = cbFuncTbl->zfcbDisAsocNotify;
-        wd->zfcbApConnectNotify = cbFuncTbl->zfcbApConnectNotify;
-        wd->zfcbConnectNotify = cbFuncTbl->zfcbConnectNotify;
-        wd->zfcbScanNotify = cbFuncTbl->zfcbScanNotify;
-        wd->zfcbMicFailureNotify = cbFuncTbl->zfcbMicFailureNotify;
-        wd->zfcbApMicFailureNotify = cbFuncTbl->zfcbApMicFailureNotify;
-        wd->zfcbIbssPartnerNotify = cbFuncTbl->zfcbIbssPartnerNotify;
-        wd->zfcbMacAddressNotify = cbFuncTbl->zfcbMacAddressNotify;
-        wd->zfcbSendCompleteIndication = cbFuncTbl->zfcbSendCompleteIndication;
-        wd->zfcbRecvEth = cbFuncTbl->zfcbRecvEth;
-        wd->zfcbRestoreBufData = cbFuncTbl->zfcbRestoreBufData;
-        wd->zfcbRecv80211 = cbFuncTbl->zfcbRecv80211;
+	zfCwmInit(dev);
+
+	wd->commTally.RateCtrlTxMPDU = 0;
+	wd->commTally.RateCtrlBAFail = 0;
+	wd->preambleTypeInUsed = ZM_PREAMBLE_TYPE_SHORT;
+
+	if (cbFuncTbl == NULL) {
+		/* zfcbRecvEth() is mandatory */
+		zm_assert(0);
+	} else {
+		if (cbFuncTbl->zfcbRecvEth == NULL) {
+			/* zfcbRecvEth() is mandatory */
+			zm_assert(0);
+		}
+		wd->zfcbAuthNotify = cbFuncTbl->zfcbAuthNotify;
+		wd->zfcbAuthNotify = cbFuncTbl->zfcbAuthNotify;
+		wd->zfcbAsocNotify = cbFuncTbl->zfcbAsocNotify;
+		wd->zfcbDisAsocNotify = cbFuncTbl->zfcbDisAsocNotify;
+		wd->zfcbApConnectNotify = cbFuncTbl->zfcbApConnectNotify;
+		wd->zfcbConnectNotify = cbFuncTbl->zfcbConnectNotify;
+		wd->zfcbScanNotify = cbFuncTbl->zfcbScanNotify;
+		wd->zfcbMicFailureNotify = cbFuncTbl->zfcbMicFailureNotify;
+		wd->zfcbApMicFailureNotify = cbFuncTbl->zfcbApMicFailureNotify;
+		wd->zfcbIbssPartnerNotify = cbFuncTbl->zfcbIbssPartnerNotify;
+		wd->zfcbMacAddressNotify = cbFuncTbl->zfcbMacAddressNotify;
+		wd->zfcbSendCompleteIndication =
+					cbFuncTbl->zfcbSendCompleteIndication;
+		wd->zfcbRecvEth = cbFuncTbl->zfcbRecvEth;
+		wd->zfcbRestoreBufData = cbFuncTbl->zfcbRestoreBufData;
+		wd->zfcbRecv80211 = cbFuncTbl->zfcbRecv80211;
 #ifdef ZM_ENABLE_CENC
-        wd->zfcbCencAsocNotify = cbFuncTbl->zfcbCencAsocNotify;
-#endif //ZM_ENABLE_CENC
-        wd->zfcbClassifyTxPacket = cbFuncTbl->zfcbClassifyTxPacket;
-        wd->zfcbHwWatchDogNotify = cbFuncTbl->zfcbHwWatchDogNotify;
-    }
-
-    //add by honda 0330
-    cbUsbFuncTbl.zfcbUsbRecv = zfiUsbRecv;
-    cbUsbFuncTbl.zfcbUsbRegIn = zfiUsbRegIn;
-    cbUsbFuncTbl.zfcbUsbOutComplete = zfiUsbOutComplete;
-    cbUsbFuncTbl.zfcbUsbRegOutComplete = zfiUsbRegOutComplete;
-    zfwUsbRegisterCallBack(dev, &cbUsbFuncTbl);
-    /* Init OWN MAC address */
-    wd->macAddr[0] = 0x8000;
-    wd->macAddr[1] = 0x0000;
-    wd->macAddr[2] = 0x0000;
-
-    wd->regulationTable.regionCode = 0xffff;
-
-    zfHpInit(dev, wd->frequency);
-
-    /* init region code */
-    //wd->regulationTable.regionCode = NULL1_WORLD; //Only 2.4g RegCode
-    //zfHpGetRegulationTablefromRegionCode(dev, NULL1_WORLD);
-    //zfiWlanSetDot11DMode(dev , 1); // Enable 802.11d
-    /* Get the first channel */
-    //wd->frequency = zfChGetFirstChannel(dev, &bPassive);
+		wd->zfcbCencAsocNotify = cbFuncTbl->zfcbCencAsocNotify;
+#endif /* ZM_ENABLE_CENC */
+		wd->zfcbClassifyTxPacket = cbFuncTbl->zfcbClassifyTxPacket;
+		wd->zfcbHwWatchDogNotify = cbFuncTbl->zfcbHwWatchDogNotify;
+	}
+
+	/* add by honda 0330 */
+	cbUsbFuncTbl.zfcbUsbRecv = zfiUsbRecv;
+	cbUsbFuncTbl.zfcbUsbRegIn = zfiUsbRegIn;
+	cbUsbFuncTbl.zfcbUsbOutComplete = zfiUsbOutComplete;
+	cbUsbFuncTbl.zfcbUsbRegOutComplete = zfiUsbRegOutComplete;
+	zfwUsbRegisterCallBack(dev, &cbUsbFuncTbl);
+	/* Init OWN MAC address */
+	wd->macAddr[0] = 0x8000;
+	wd->macAddr[1] = 0x0000;
+	wd->macAddr[2] = 0x0000;
+
+	wd->regulationTable.regionCode = 0xffff;
+
+	zfHpInit(dev, wd->frequency);
+
+	/* init region code */
+	/* wd->regulationTable.regionCode = NULL1_WORLD; //Only 2.4g RegCode */
+	/* zfHpGetRegulationTablefromRegionCode(dev, NULL1_WORLD); */
+	/* zfiWlanSetDot11DMode(dev , 1); //Enable 802.11d */
+	/* Get the first channel */
+	/* wd->frequency = zfChGetFirstChannel(dev, &bPassive); */
 #ifdef ZM_AP_DEBUG
-    //wd->frequency = 2437;
+	/* wd->frequency = 2437; */
 #endif
 
-    //STA mode
-    wd->sta.mTxRate = 0x0;
-    wd->sta.uTxRate = 0x3;
-    wd->sta.mmTxRate = 0x0;
-    wd->sta.adapterState = ZM_STA_STATE_DISCONNECT;
-    wd->sta.capability[0] = 0x01;
-    wd->sta.capability[1] = 0x00;
-
-    wd->sta.preambleTypeHT = 0;
-    wd->sta.htCtrlBandwidth = 0;
-    wd->sta.htCtrlSTBC = 0;
-    wd->sta.htCtrlSG = 0;
-    wd->sta.defaultTA = 0;
-    //wd->sta.activescanTickPerChannel = ZM_TIME_ACTIVE_SCAN/ZM_MS_PER_TICK;
+	/* STA mode */
+	wd->sta.mTxRate = 0x0;
+	wd->sta.uTxRate = 0x3;
+	wd->sta.mmTxRate = 0x0;
+	wd->sta.adapterState = ZM_STA_STATE_DISCONNECT;
+	wd->sta.capability[0] = 0x01;
+	wd->sta.capability[1] = 0x00;
+
+	wd->sta.preambleTypeHT = 0;
+	wd->sta.htCtrlBandwidth = 0;
+	wd->sta.htCtrlSTBC = 0;
+	wd->sta.htCtrlSG = 0;
+	wd->sta.defaultTA = 0;
+	/*wd->sta.activescanTickPerChannel =
+	*ZM_TIME_ACTIVE_SCAN/ZM_MS_PER_TICK;
+	*/
 	{
 		u8_t Dur = ZM_TIME_ACTIVE_SCAN;
 		zfwGetActiveScanDur(dev, &Dur);
-		wd->sta.activescanTickPerChannel = Dur/ZM_MS_PER_TICK;
+		wd->sta.activescanTickPerChannel = Dur / ZM_MS_PER_TICK;
 
 	}
-    wd->sta.passiveScanTickPerChannel = ZM_TIME_PASSIVE_SCAN/ZM_MS_PER_TICK;
-    wd->sta.bAutoReconnect = TRUE;
-    wd->sta.dropUnencryptedPkts = FALSE;
+	wd->sta.passiveScanTickPerChannel = ZM_TIME_PASSIVE_SCAN/ZM_MS_PER_TICK;
+	wd->sta.bAutoReconnect = TRUE;
+	wd->sta.dropUnencryptedPkts = FALSE;
 
-    /* set default to bypass all multicast packet for linux, window XP would set 0 by wrapper initialization */
+	/* set default to bypass all multicast packet for linux,
+	*  window XP would set 0 by wrapper initialization
+	*/
 	wd->sta.bAllMulticast = 1;
 
-    /* Initial the RIFS Status / RIFS-like frame count / RIFS count */
-    wd->sta.rifsState = ZM_RIFS_STATE_DETECTING;
-    wd->sta.rifsLikeFrameCnt = 0;
-    wd->sta.rifsCount = 0;
-
-    wd->sta.osRxFilter = 0;
-    wd->sta.bSafeMode = 0;
-
-    //Common
-    zfResetSupportRate(dev, ZM_DEFAULT_SUPPORT_RATE_DISCONNECT);
-    wd->beaconInterval = 100;
-    wd->rtsThreshold = 2346;
-    wd->fragThreshold = 32767;
-    wd->wlanMode = ZM_MODE_INFRASTRUCTURE;
-    wd->txMCS = 0xff;    //AUTO
-    wd->dtim = 1;
-    //wd->txMT = 1;       //OFDM
-    wd->tick = 1;
-    wd->maxTxPower2 = 0xff;
-    wd->maxTxPower5 = 0xff;
-    wd->supportMode = 0xffffffff;
-    wd->ws.adhocMode = ZM_ADHOCBAND_G;
-    wd->ws.autoSetFrequency = 0xff;
-
-    //AP mode
-    //wd->bgMode = wd->ws.bgMode;
-    wd->ap.ssidLen[0] = 6;
-    wd->ap.ssid[0][0] = 'Z';
-    wd->ap.ssid[0][1] = 'D';
-    wd->ap.ssid[0][2] = '1';
-    wd->ap.ssid[0][3] = '2';
-    wd->ap.ssid[0][4] = '2';
-    wd->ap.ssid[0][5] = '1';
-
-    // Init the country iso name as NA
-    wd->ws.countryIsoName[0] = 0;
-    wd->ws.countryIsoName[1] = 0;
-    wd->ws.countryIsoName[2] = '\0';
+	/* Initial the RIFS Status / RIFS-like frame count / RIFS count */
+	wd->sta.rifsState = ZM_RIFS_STATE_DETECTING;
+	wd->sta.rifsLikeFrameCnt = 0;
+	wd->sta.rifsCount = 0;
+
+	wd->sta.osRxFilter = 0;
+	wd->sta.bSafeMode = 0;
+
+	/* Common */
+	zfResetSupportRate(dev, ZM_DEFAULT_SUPPORT_RATE_DISCONNECT);
+	wd->beaconInterval = 100;
+	wd->rtsThreshold = 2346;
+	wd->fragThreshold = 32767;
+	wd->wlanMode = ZM_MODE_INFRASTRUCTURE;
+	wd->txMCS = 0xff;    /* AUTO */
+	wd->dtim = 1;
+	/* wd->txMT = 1;       *//*OFDM */
+	wd->tick = 1;
+	wd->maxTxPower2 = 0xff;
+	wd->maxTxPower5 = 0xff;
+	wd->supportMode = 0xffffffff;
+	wd->ws.adhocMode = ZM_ADHOCBAND_G;
+	wd->ws.autoSetFrequency = 0xff;
+
+	/* AP mode */
+	/* wd->bgMode = wd->ws.bgMode; */
+	wd->ap.ssidLen[0] = 6;
+	wd->ap.ssid[0][0] = 'Z';
+	wd->ap.ssid[0][1] = 'D';
+	wd->ap.ssid[0][2] = '1';
+	wd->ap.ssid[0][3] = '2';
+	wd->ap.ssid[0][4] = '2';
+	wd->ap.ssid[0][5] = '1';
+
+	/* Init the country iso name as NA */
+	wd->ws.countryIsoName[0] = 0;
+	wd->ws.countryIsoName[1] = 0;
+	wd->ws.countryIsoName[2] = '\0';
 
 	/* init fragmentation is disabled */
-	//zfiWlanSetFragThreshold(dev, 0);
+	/* zfiWlanSetFragThreshold(dev, 0); */
 
 	/* airopeek : swSniffer 1=>on  0=>off */
 	wd->swSniffer = 0;
-    wd->XLinkMode = 0;
+	wd->XLinkMode = 0;
 
-// jhlee HT 0
+	/* jhlee HT 0 */
 #if 1
-    /* AP Mode*/
-    /* Init HT Capability Info */
-    wd->ap.HTCap.Data.ElementID = ZM_WLAN_EID_HT_CAPABILITY;
-    wd->ap.HTCap.Data.Length = 26;
-    //wd->ap.HTCap.Data.SupChannelWidthSet = 0;
-    //wd->ap.HTCap.Data.MIMOPowerSave = 3;
-    //wd->ap.HTCap.Data.ShortGIfor40MHz = 0;
-    //wd->ap.HTCap.Data.ShortGIfor20MHz = 0;
-    //wd->ap.HTCap.Data.DSSSandCCKin40MHz = 0;
-    wd->ap.HTCap.Data.AMPDUParam |= HTCAP_MaxRxAMPDU3;
-    wd->ap.HTCap.Data.MCSSet[0] = 0xFF; // MCS 0 ~  7
-    wd->ap.HTCap.Data.MCSSet[1] = 0xFF; // MCS 8 ~ 15
-
-    /* Init Extended HT Capability Info */
-    wd->ap.ExtHTCap.Data.ElementID = ZM_WLAN_EID_EXTENDED_HT_CAPABILITY;
-    wd->ap.ExtHTCap.Data.Length = 22;
-    wd->ap.ExtHTCap.Data.ControlChannel = 6;
-    //wd->ap.ExtHTCap.Data.ExtChannelOffset = 3;
-    wd->ap.ExtHTCap.Data.ChannelInfo |= ExtHtCap_RecomTxWidthSet;
-    //wd->ap.ExtHTCap.Data.RIFSMode = 1;
-    wd->ap.ExtHTCap.Data.OperatingInfo |= 1;
-
-    /* STA Mode*/
-    /* Init HT Capability Info */
-    wd->sta.HTCap.Data.ElementID = ZM_WLAN_EID_HT_CAPABILITY;
-    wd->sta.HTCap.Data.Length = 26;
-
-    /* Test with 5G-AP : 7603 */
-    //wd->sta.HTCap.Data.SupChannelWidthSet = 1;
-    wd->sta.HTCap.Data.HtCapInfo |= HTCAP_SMEnabled;
-    wd->sta.HTCap.Data.HtCapInfo |= HTCAP_SupChannelWidthSet;
-    wd->sta.HTCap.Data.HtCapInfo |= HTCAP_ShortGIfor40MHz;
-    wd->sta.HTCap.Data.HtCapInfo |= HTCAP_DSSSandCCKin40MHz;
+	/* AP Mode*/
+	/* Init HT Capability Info */
+	wd->ap.HTCap.Data.ElementID = ZM_WLAN_EID_HT_CAPABILITY;
+	wd->ap.HTCap.Data.Length = 26;
+	/*wd->ap.HTCap.Data.SupChannelWidthSet = 0;
+	wd->ap.HTCap.Data.MIMOPowerSave = 3;
+	wd->ap.HTCap.Data.ShortGIfor40MHz = 0;
+	wd->ap.HTCap.Data.ShortGIfor20MHz = 0;
+	wd->ap.HTCap.Data.DSSSandCCKin40MHz = 0;
+	*/
+	wd->ap.HTCap.Data.AMPDUParam |= HTCAP_MaxRxAMPDU3;
+	wd->ap.HTCap.Data.MCSSet[0] = 0xFF; /* MCS 0 ~  7 */
+	wd->ap.HTCap.Data.MCSSet[1] = 0xFF; /* MCS 8 ~ 15 */
+
+	/* Init Extended HT Capability Info */
+	wd->ap.ExtHTCap.Data.ElementID = ZM_WLAN_EID_EXTENDED_HT_CAPABILITY;
+	wd->ap.ExtHTCap.Data.Length = 22;
+	wd->ap.ExtHTCap.Data.ControlChannel = 6;
+	/* wd->ap.ExtHTCap.Data.ExtChannelOffset = 3; */
+	wd->ap.ExtHTCap.Data.ChannelInfo |= ExtHtCap_RecomTxWidthSet;
+	/* wd->ap.ExtHTCap.Data.RIFSMode = 1; */
+	wd->ap.ExtHTCap.Data.OperatingInfo |= 1;
+
+	/* STA Mode*/
+	/* Init HT Capability Info */
+	wd->sta.HTCap.Data.ElementID = ZM_WLAN_EID_HT_CAPABILITY;
+	wd->sta.HTCap.Data.Length = 26;
+
+	/* Test with 5G-AP : 7603 */
+	/* wd->sta.HTCap.Data.SupChannelWidthSet = 1; */
+	wd->sta.HTCap.Data.HtCapInfo |= HTCAP_SMEnabled;
+	wd->sta.HTCap.Data.HtCapInfo |= HTCAP_SupChannelWidthSet;
+	wd->sta.HTCap.Data.HtCapInfo |= HTCAP_ShortGIfor40MHz;
+	wd->sta.HTCap.Data.HtCapInfo |= HTCAP_DSSSandCCKin40MHz;
 #ifndef ZM_DISABLE_AMSDU8K_SUPPORT
-    wd->sta.HTCap.Data.HtCapInfo |= HTCAP_MaxAMSDULength;
+	wd->sta.HTCap.Data.HtCapInfo |= HTCAP_MaxAMSDULength;
 #endif
-    //wd->sta.HTCap.Data.MIMOPowerSave = 0;
-    //wd->sta.HTCap.Data.ShortGIfor40MHz = 0;
-    //wd->sta.HTCap.Data.ShortGIfor20MHz = 0;
-    //wd->sta.HTCap.Data.DSSSandCCKin40MHz = 0;
-    wd->sta.HTCap.Data.AMPDUParam |= HTCAP_MaxRxAMPDU3;
-    wd->sta.HTCap.Data.MCSSet[0] = 0xFF; // MCS 0 ~  7
-    wd->sta.HTCap.Data.MCSSet[1] = 0xFF; // MCS 8 ~ 15
-    wd->sta.HTCap.Data.PCO |= HTCAP_TransmissionTime3;
-    //wd->sta.HTCap.Data.TransmissionTime = 0;
-    /* Init Extended HT Capability Info */
-    wd->sta.ExtHTCap.Data.ElementID = ZM_WLAN_EID_EXTENDED_HT_CAPABILITY;
-    wd->sta.ExtHTCap.Data.Length = 22;
-    wd->sta.ExtHTCap.Data.ControlChannel = 6;
-
-    //wd->sta.ExtHTCap.Data.ExtChannelOffset |= 3;
-    wd->sta.ExtHTCap.Data.ChannelInfo |= ExtHtCap_ExtChannelOffsetBelow;
-
-    //wd->sta.ExtHTCap.Data.RecomTxWidthSet = 1;
-    //wd->sta.ExtHTCap.Data.RIFSMode = 1;
-    wd->sta.ExtHTCap.Data.OperatingInfo |= 1;
+	/*wd->sta.HTCap.Data.MIMOPowerSave = 0;
+	wd->sta.HTCap.Data.ShortGIfor40MHz = 0;
+	wd->sta.HTCap.Data.ShortGIfor20MHz = 0;
+	wd->sta.HTCap.Data.DSSSandCCKin40MHz = 0;
+	*/
+	wd->sta.HTCap.Data.AMPDUParam |= HTCAP_MaxRxAMPDU3;
+	wd->sta.HTCap.Data.MCSSet[0] = 0xFF; /* MCS 0 ~  7 */
+	wd->sta.HTCap.Data.MCSSet[1] = 0xFF; /* MCS 8 ~ 15 */
+	wd->sta.HTCap.Data.PCO |= HTCAP_TransmissionTime3;
+	/* wd->sta.HTCap.Data.TransmissionTime = 0; */
+	/* Init Extended HT Capability Info */
+	wd->sta.ExtHTCap.Data.ElementID = ZM_WLAN_EID_EXTENDED_HT_CAPABILITY;
+	wd->sta.ExtHTCap.Data.Length = 22;
+	wd->sta.ExtHTCap.Data.ControlChannel = 6;
+
+	/* wd->sta.ExtHTCap.Data.ExtChannelOffset |= 3; */
+	wd->sta.ExtHTCap.Data.ChannelInfo |= ExtHtCap_ExtChannelOffsetBelow;
+
+	/* wd->sta.ExtHTCap.Data.RecomTxWidthSet = 1; */
+	/* wd->sta.ExtHTCap.Data.RIFSMode = 1; */
+	wd->sta.ExtHTCap.Data.OperatingInfo |= 1;
 #endif
 
 #if 0
-    /* WME test code */
-    wd->ap.qosMode[0] = 1;
+	/* WME test code */
+	wd->ap.qosMode[0] = 1;
 #endif
 
-    wd->ledStruct.ledMode[0] = 0x2221;
-    wd->ledStruct.ledMode[1] = 0x2221;
+	wd->ledStruct.ledMode[0] = 0x2221;
+	wd->ledStruct.ledMode[1] = 0x2221;
 
-    zfTimerInit(dev);
+	zfTimerInit(dev);
 
-    ZM_PERFORMANCE_INIT(dev);
+	ZM_PERFORMANCE_INIT(dev);
 
-    zfBssInfoCreate(dev);
-    zfScanMgrInit(dev);
-    zfPowerSavingMgrInit(dev);
+	zfBssInfoCreate(dev);
+	zfScanMgrInit(dev);
+	zfPowerSavingMgrInit(dev);
 
 #if 0
-    /* Test code */
-    {
-        u32_t key[4] = {0xffffffff, 0xff, 0, 0};
-        u16_t addr[3] = {0x8000, 0x01ab, 0x0000};
-        //zfSetKey(dev, 0, 0, ZM_WEP64, addr, key);
-        //zfSetKey(dev, 0, 0, ZM_AES, addr, key);
-        //zfSetKey(dev, 64, 0, 1, wd->macAddr, key);
-    }
+	/* Test code */
+	{
+		u32_t key[4] = {0xffffffff, 0xff, 0, 0};
+		u16_t addr[3] = {0x8000, 0x01ab, 0x0000};
+		/*zfSetKey(dev, 0, 0, ZM_WEP64, addr, key);
+		zfSetKey(dev, 0, 0, ZM_AES, addr, key);
+		zfSetKey(dev, 64, 0, 1, wd->macAddr, key);
+		*/
+	}
 #endif
 
-    // WME settings
-    wd->ws.staWmeEnabled = 1;           // Enable WME by default
-    #define ZM_UAPSD_Q_SIZE 32 //2^N
-    wd->ap.uapsdQ = zfQueueCreate(dev, ZM_UAPSD_Q_SIZE);
-    zm_assert(wd->ap.uapsdQ != NULL);
-    wd->sta.uapsdQ = zfQueueCreate(dev, ZM_UAPSD_Q_SIZE);
-    zm_assert(wd->sta.uapsdQ != NULL);
+	/* WME settings */
+	wd->ws.staWmeEnabled = 1;           /* Enable WME by default */
+#define ZM_UAPSD_Q_SIZE 32 /* 2^N */
+	wd->ap.uapsdQ = zfQueueCreate(dev, ZM_UAPSD_Q_SIZE);
+	zm_assert(wd->ap.uapsdQ != NULL);
+	wd->sta.uapsdQ = zfQueueCreate(dev, ZM_UAPSD_Q_SIZE);
+	zm_assert(wd->sta.uapsdQ != NULL);
 
-    //zfHpInit(dev, wd->frequency);
+	/* zfHpInit(dev, wd->frequency); */
 
-    /* MAC address */
-    //zfHpSetMacAddress(dev, wd->macAddr, 0);
-    zfHpGetMacAddress(dev);
+	/* MAC address */
+	/* zfHpSetMacAddress(dev, wd->macAddr, 0); */
+	zfHpGetMacAddress(dev);
 
-    zfCoreSetFrequency(dev, wd->frequency);
+	zfCoreSetFrequency(dev, wd->frequency);
 
 #if ZM_PCI_LOOP_BACK == 1
-    zfwWriteReg(dev, ZM_REG_PCI_CONTROL, 6);
+	zfwWriteReg(dev, ZM_REG_PCI_CONTROL, 6);
 #endif /* #if ZM_PCI_LOOP_BACK == 1 */
 
-    //zfiWlanSetDot11DMode(dev , 1); // Enable 802.11d
-    //zfiWlanSetDot11HDFSMode(dev , 1); // Enable 802.11h DFS
-    wd->sta.DFSEnable = 1;
-    wd->sta.capability[1] |= ZM_BIT_0;
+	/* zfiWlanSetDot11DMode(dev , 1); // Enable 802.11d */
+	/* zfiWlanSetDot11HDFSMode(dev , 1); // Enable 802.11h DFS */
+	wd->sta.DFSEnable = 1;
+	wd->sta.capability[1] |= ZM_BIT_0;
 
-    //zfiWlanSetFrequency(dev, 5260000, TRUE);
-    //zfiWlanSetAniMode(dev , 1); // Enable ANI
+	/* zfiWlanSetFrequency(dev, 5260000, TRUE); */
+	/* zfiWlanSetAniMode(dev , 1); // Enable ANI */
 
-    /* Trgger Rx DMA */
-    zfHpStartRecv(dev);
+	/* Trgger Rx DMA */
+	zfHpStartRecv(dev);
 
-    zm_debug_msg0("end");
+	zm_debug_msg0("end");
 
-    return 0;
+	return 0;
 }
 
 /* WLAN hardware will be shutdown and all resource will be release */
-u16_t zfiWlanClose(zdev_t* dev)
+u16_t zfiWlanClose(zdev_t *dev)
 {
-    zmw_get_wlan_dev(dev);
+	zmw_get_wlan_dev(dev);
 
-    zm_msg0_init(ZM_LV_0, "enter");
+	zm_msg0_init(ZM_LV_0, "enter");
 
-    wd->state = ZM_WLAN_STATE_CLOSEDED;
+	wd->state = ZM_WLAN_STATE_CLOSEDED;
 
-    //zfiWlanDisable(dev, 1);
-    zfWlanReset(dev);
+	/* zfiWlanDisable(dev, 1); */
+	zfWlanReset(dev);
 
-    zfHpStopRecv(dev);
+	zfHpStopRecv(dev);
 
-    /* Disable MAC */
-    /* Disable PHY */
-    /* Disable RF */
+	/* Disable MAC */
+	/* Disable PHY */
+	/* Disable RF */
 
-    zfHpRelease(dev);
+	zfHpRelease(dev);
 
-    zfQueueDestroy(dev, wd->ap.uapsdQ);
-    zfQueueDestroy(dev, wd->sta.uapsdQ);
+	zfQueueDestroy(dev, wd->ap.uapsdQ);
+	zfQueueDestroy(dev, wd->sta.uapsdQ);
 
-    zfBssInfoDestroy(dev);
+	zfBssInfoDestroy(dev);
 
 #ifdef ZM_ENABLE_AGGREGATION
-    /* add by honda */
-    zfAggRxFreeBuf(dev, 1);  //1 for release structure memory
-    /* end of add by honda */
+	/* add by honda */
+	zfAggRxFreeBuf(dev, 1);  /* 1 for release structure memory */
+	/* end of add by honda */
 #endif
 
-    zm_msg0_init(ZM_LV_0, "exit");
+	zm_msg0_init(ZM_LV_0, "exit");
 
-    return 0;
+	return 0;
 }
 
-void zfGetWrapperSetting(zdev_t* dev)
+void zfGetWrapperSetting(zdev_t *dev)
 {
-    u8_t   bPassive;
-    u16_t vapId = 0;
+	u8_t bPassive;
+	u16_t vapId = 0;
 
-    zmw_get_wlan_dev(dev);
+	zmw_get_wlan_dev(dev);
 
-    zmw_declare_for_critical_section();
+	zmw_declare_for_critical_section();
 #if 0
-    if ( (wd->ws.countryIsoName[0] != 0)
-         || (wd->ws.countryIsoName[1] != 0)
-         || (wd->ws.countryIsoName[2] != '\0') )
-    {
-        zfHpGetRegulationTablefromRegionCode(
-            dev,
-            zfHpGetRegionCodeFromIsoName(dev, wd->ws.countryIsoName) );
-    }
+	if ((wd->ws.countryIsoName[0] != 0)
+		|| (wd->ws.countryIsoName[1] != 0)
+		|| (wd->ws.countryIsoName[2] != '\0')) {
+		zfHpGetRegulationTablefromRegionCode(dev,
+		zfHpGetRegionCodeFromIsoName(dev, wd->ws.countryIsoName));
+	}
 #endif
-    zmw_enter_critical_section(dev);
-
-    wd->wlanMode = wd->ws.wlanMode;
-
-    /* set channel */
-    if ( wd->ws.frequency )
-    {
-        wd->frequency = wd->ws.frequency;
-        wd->ws.frequency = 0;
-    }
-    else
-    {
-        wd->frequency = zfChGetFirstChannel(dev, &bPassive);
-
-        if ( wd->wlanMode == ZM_MODE_IBSS )
-        {
-            if (wd->ws.adhocMode == ZM_ADHOCBAND_A)
-            {
-                wd->frequency = ZM_CH_A_36;
-            }
-            else
-            {
-            wd->frequency = ZM_CH_G_6;
-            }
-        }
-    }
+	zmw_enter_critical_section(dev);
+
+	wd->wlanMode = wd->ws.wlanMode;
+
+	/* set channel */
+	if (wd->ws.frequency) {
+		wd->frequency = wd->ws.frequency;
+		wd->ws.frequency = 0;
+	} else {
+		wd->frequency = zfChGetFirstChannel(dev, &bPassive);
+
+		if (wd->wlanMode == ZM_MODE_IBSS) {
+			if (wd->ws.adhocMode == ZM_ADHOCBAND_A)
+				wd->frequency = ZM_CH_A_36;
+			else
+				wd->frequency = ZM_CH_G_6;
+		}
+	}
 #ifdef ZM_AP_DEBUG
-    /* honda add for debug, 2437 channel 6, 2452 channel 9 */
-    wd->frequency = 2437;
-    /* end of add by honda */
+	/* honda add for debug, 2437 channel 6, 2452 channel 9 */
+	wd->frequency = 2437;
+	/* end of add by honda */
 #endif
 
-    /* set preamble type */
-    switch (wd->ws.preambleType)
-    {
-    case ZM_PREAMBLE_TYPE_AUTO:
-    case ZM_PREAMBLE_TYPE_SHORT:
-    case ZM_PREAMBLE_TYPE_LONG:
-        wd->preambleType = wd->ws.preambleType;
-        break;
-    default:
-        wd->preambleType = ZM_PREAMBLE_TYPE_SHORT;
-        break;
-    }
-    wd->ws.preambleType = 0;
-
-    if ( wd->wlanMode == ZM_MODE_AP )
-    {
-        vapId = zfwGetVapId(dev);
-
-        if (vapId == 0xffff)
-        {
-            wd->ap.authAlgo[0] = wd->ws.authMode;
-            wd->ap.encryMode[0] = wd->ws.encryMode;
-        }
-        else
-        {
-            wd->ap.authAlgo[vapId + 1] = wd->ws.authMode;
-            wd->ap.encryMode[vapId + 1] = wd->ws.encryMode;
-        }
-        wd->ws.authMode = 0;
-        wd->ws.encryMode = ZM_NO_WEP;
-
-        /* Get beaconInterval from WrapperSetting */
-        if ((wd->ws.beaconInterval >= 20) && (wd->ws.beaconInterval <= 1000))
-        {
-            wd->beaconInterval = wd->ws.beaconInterval;
-        }
-        else
-        {
-            wd->beaconInterval = 100; //100ms
-        }
-
-        if (wd->ws.dtim > 0)
-        {
-            wd->dtim = wd->ws.dtim;
-        }
-        else
-        {
-            wd->dtim = 1;
-        }
-
-        wd->ap.qosMode = wd->ws.apWmeEnabled & 0x1;
-        wd->ap.uapsdEnabled = (wd->ws.apWmeEnabled & 0x2) >> 1;
-    }
-    else
-    {
-        wd->sta.authMode = wd->ws.authMode;
-        wd->sta.currentAuthMode = wd->ws.authMode;
-        wd->sta.wepStatus = wd->ws.wepStatus;
-
-        if ( wd->ws.beaconInterval )
-        {
-            wd->beaconInterval = wd->ws.beaconInterval;
-        }
-        else
-        {
-            wd->beaconInterval = 0x64;
-        }
-
-        if ( wd->wlanMode == ZM_MODE_IBSS )
-        {
-            /* 1. Set default channel 6 (2437MHz) */
-//            wd->frequency = 2437;
-
-            /* 2. Otus support 802.11g Mode */
-            if ((wd->ws.adhocMode == ZM_ADHOCBAND_G) ||
-                (wd->ws.adhocMode == ZM_ADHOCBAND_BG) ||
-                (wd->ws.adhocMode == ZM_ADHOCBAND_ABG) ) {
-                wd->wfc.bIbssGMode = 1;
-            } else {
-                wd->wfc.bIbssGMode = 0;
-            }
-
-            /* 3. set short preamble  */
-            //wd->sta.preambleType = ZM_PREAMBLE_TYPE_SHORT ;
-        }
-
-        /* set ATIM window */
-        if ( wd->ws.atimWindow )
-        {
-            wd->sta.atimWindow = wd->ws.atimWindow;
-        }
-        else
-        {
-            //wd->sta.atimWindow = 0x0a;
-            wd->sta.atimWindow = 0;
-        }
-
-        //wd->sta.connectingHiddenAP = 1;//wd->ws.connectingHiddenAP;
-        wd->sta.dropUnencryptedPkts = wd->ws.dropUnencryptedPkts;
-        wd->sta.ibssJoinOnly = wd->ws.ibssJoinOnly;
-
-        if ( wd->ws.bDesiredBssid )
-        {
-            zfMemoryCopy(wd->sta.desiredBssid, wd->ws.desiredBssid, 6);
-            wd->sta.bDesiredBssid = TRUE;
-            wd->ws.bDesiredBssid = FALSE;
-        }
-        else
-        {
-            wd->sta.bDesiredBssid = FALSE;
-        }
-
-        /* check ssid */
-        if ( wd->ws.ssidLen != 0 )
-        {
-            if ( (!zfMemoryIsEqual(wd->ws.ssid, wd->sta.ssid,
-                                   wd->sta.ssidLen))||
-                 (wd->ws.ssidLen != wd->sta.ssidLen)||
-                 (wd->sta.authMode == ZM_AUTH_MODE_WPA)||
-                 (wd->sta.authMode == ZM_AUTH_MODE_WPAPSK) ||
-                 (wd->ws.staWmeQosInfo!= 0) )
-            {
-                /*if u-APSD test(set QosInfo), clear connectByReasso to do association (not reassociation)*/
-                wd->sta.connectByReasso = FALSE;
-                wd->sta.failCntOfReasso = 0;
-                wd->sta.pmkidInfo.bssidCount = 0;
-
-                wd->sta.ssidLen = wd->ws.ssidLen;
-                zfMemoryCopy(wd->sta.ssid, wd->ws.ssid, wd->sta.ssidLen);
-
-                if ( wd->sta.ssidLen < 32 )
-                {
-                    wd->sta.ssid[wd->sta.ssidLen] = 0;
-                }
-            }
-        }
-        else
-        {   /* ANY BSS */
-            wd->sta.ssid[0] = 0;
-            wd->sta.ssidLen = 0;
-        }
-
-        wd->sta.wmeEnabled = wd->ws.staWmeEnabled;
-        wd->sta.wmeQosInfo = wd->ws.staWmeQosInfo;
-
-    }
-
-    zmw_leave_critical_section(dev);
+	/* set preamble type */
+	switch (wd->ws.preambleType) {
+	case ZM_PREAMBLE_TYPE_AUTO:
+	case ZM_PREAMBLE_TYPE_SHORT:
+	case ZM_PREAMBLE_TYPE_LONG:
+		wd->preambleType = wd->ws.preambleType;
+		break;
+	default:
+		wd->preambleType = ZM_PREAMBLE_TYPE_SHORT;
+		break;
+	}
+	wd->ws.preambleType = 0;
+
+	if (wd->wlanMode == ZM_MODE_AP) {
+		vapId = zfwGetVapId(dev);
+
+		if (vapId == 0xffff) {
+			wd->ap.authAlgo[0] = wd->ws.authMode;
+			wd->ap.encryMode[0] = wd->ws.encryMode;
+		} else {
+			wd->ap.authAlgo[vapId + 1] = wd->ws.authMode;
+			wd->ap.encryMode[vapId + 1] = wd->ws.encryMode;
+		}
+		wd->ws.authMode = 0;
+		wd->ws.encryMode = ZM_NO_WEP;
+
+		/* Get beaconInterval from WrapperSetting */
+		if ((wd->ws.beaconInterval >= 20) &&
+					(wd->ws.beaconInterval <= 1000))
+			wd->beaconInterval = wd->ws.beaconInterval;
+		else
+			wd->beaconInterval = 100; /* 100ms */
+
+		if (wd->ws.dtim > 0)
+			wd->dtim = wd->ws.dtim;
+		else
+			wd->dtim = 1;
+
+
+		wd->ap.qosMode = wd->ws.apWmeEnabled & 0x1;
+		wd->ap.uapsdEnabled = (wd->ws.apWmeEnabled & 0x2) >> 1;
+	} else {
+		wd->sta.authMode = wd->ws.authMode;
+		wd->sta.currentAuthMode = wd->ws.authMode;
+		wd->sta.wepStatus = wd->ws.wepStatus;
+
+		if (wd->ws.beaconInterval)
+			wd->beaconInterval = wd->ws.beaconInterval;
+		else
+			wd->beaconInterval = 0x64;
+
+		if (wd->wlanMode == ZM_MODE_IBSS) {
+			/* 1. Set default channel 6 (2437MHz) */
+			/* wd->frequency = 2437; */
+
+			/* 2. Otus support 802.11g Mode */
+			if ((wd->ws.adhocMode == ZM_ADHOCBAND_G) ||
+				(wd->ws.adhocMode == ZM_ADHOCBAND_BG) ||
+				(wd->ws.adhocMode == ZM_ADHOCBAND_ABG))
+				wd->wfc.bIbssGMode = 1;
+			else
+				wd->wfc.bIbssGMode = 0;
+
+			/* 3. set short preamble  */
+			/* wd->sta.preambleType = ZM_PREAMBLE_TYPE_SHORT; */
+		}
+
+		/* set ATIM window */
+		if (wd->ws.atimWindow)
+			wd->sta.atimWindow = wd->ws.atimWindow;
+		else {
+			/* wd->sta.atimWindow = 0x0a; */
+			wd->sta.atimWindow = 0;
+		}
+
+		/* wd->sta.connectingHiddenAP = 1;
+		   wd->ws.connectingHiddenAP;
+		*/
+		wd->sta.dropUnencryptedPkts = wd->ws.dropUnencryptedPkts;
+		wd->sta.ibssJoinOnly = wd->ws.ibssJoinOnly;
+
+		if (wd->ws.bDesiredBssid) {
+			zfMemoryCopy(wd->sta.desiredBssid,
+						wd->ws.desiredBssid, 6);
+			wd->sta.bDesiredBssid = TRUE;
+			wd->ws.bDesiredBssid = FALSE;
+		} else
+			wd->sta.bDesiredBssid = FALSE;
+
+		/* check ssid */
+		if (wd->ws.ssidLen != 0) {
+			if ((!zfMemoryIsEqual(wd->ws.ssid, wd->sta.ssid,
+				wd->sta.ssidLen)) ||
+				(wd->ws.ssidLen != wd->sta.ssidLen) ||
+				(wd->sta.authMode == ZM_AUTH_MODE_WPA) ||
+				(wd->sta.authMode == ZM_AUTH_MODE_WPAPSK) ||
+				(wd->ws.staWmeQosInfo != 0)) {
+				/* if u-APSD test(set QosInfo), clear
+				   connectByReasso to do association
+				   (not reassociation)
+				*/
+				wd->sta.connectByReasso = FALSE;
+				wd->sta.failCntOfReasso = 0;
+				wd->sta.pmkidInfo.bssidCount = 0;
+
+				wd->sta.ssidLen = wd->ws.ssidLen;
+				zfMemoryCopy(wd->sta.ssid, wd->ws.ssid,
+							wd->sta.ssidLen);
+
+				if (wd->sta.ssidLen < 32)
+					wd->sta.ssid[wd->sta.ssidLen] = 0;
+			}
+		} else {
+			/* ANY BSS */
+			wd->sta.ssid[0] = 0;
+			wd->sta.ssidLen = 0;
+		}
+
+		wd->sta.wmeEnabled = wd->ws.staWmeEnabled;
+		wd->sta.wmeQosInfo = wd->ws.staWmeQosInfo;
+
+	}
+
+	zmw_leave_critical_section(dev);
 }
 
-u16_t zfWlanEnable(zdev_t* dev)
+u16_t zfWlanEnable(zdev_t *dev)
 {
-    u8_t     bssid[6] = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0};
-    u16_t i;
-
-    zmw_get_wlan_dev(dev);
-
-    zmw_declare_for_critical_section();
-
-    if ( wd->wlanMode == ZM_MODE_UNKNOWN )
-    {
-        zm_debug_msg0("Unknown Mode...Skip...");
-        return 0;
-    }
-
-    if (wd->wlanMode == ZM_MODE_AP)
-    {
-        u16_t vapId;
-
-        vapId = zfwGetVapId(dev);
-
-        if (vapId == 0xffff)
-        {
-            /* AP mode */
-            zfApInitStaTbl(dev);
-
-            /* AP default parameters */
-            wd->bRate = 0xf;
-            wd->gRate = 0xff;
-            wd->bRateBasic = 0xf;
-            wd->gRateBasic = 0x0;
-            //wd->beaconInterval = 100;
-            wd->ap.apBitmap = 1;
-            wd->ap.beaconCounter = 0;
-            //wd->ap.vapNumber = 1;    //mark by ygwei for Vap
-
-            wd->ap.hideSsid[0] = 0;
-            wd->ap.staAgingTimeSec = 10*60;
-            wd->ap.staProbingTimeSec = 60;
-
-            for (i=0; i<ZM_MAX_AP_SUPPORT; i++)
-            {
-                wd->ap.bcmcHead[i] = wd->ap.bcmcTail[i] = 0;
-            }
-
-            //wd->ap.uniHead = wd->ap.uniTail = 0;
-
-            /* load AP parameters */
-            wd->bRateBasic = wd->ws.bRateBasic;
-            wd->gRateBasic = wd->ws.gRateBasic;
-            wd->bgMode = wd->ws.bgMode;
-            if ((wd->ws.ssidLen <= 32) && (wd->ws.ssidLen != 0))
-            {
-                wd->ap.ssidLen[0] = wd->ws.ssidLen;
-                for(i=0; i<wd->ws.ssidLen; i++)
-                {
-                    wd->ap.ssid[0][i] = wd->ws.ssid[i];
-                }
-                wd->ws.ssidLen = 0; // Reset Wrapper Variable
-            }
-
-            if (wd->ap.encryMode[0] == 0)
-            {
-                wd->ap.capab[0] = 0x001;
-            }
-            else
-            {
-                wd->ap.capab[0] = 0x011;
-            }
-            /* set Short Slot Time bit if not 11b */
-            if (wd->ap.wlanType[0] != ZM_WLAN_TYPE_PURE_B)
-            {
-              wd->ap.capab[0] |= 0x400;
-            }
-
-            // wd->ap.vapNumber = 1;    // mark by ygwei for Vap Test
-        }
-        else
-        {
+	u8_t bssid[6] = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0};
+	u16_t i;
+
+	zmw_get_wlan_dev(dev);
+
+	zmw_declare_for_critical_section();
+
+	if (wd->wlanMode == ZM_MODE_UNKNOWN) {
+		zm_debug_msg0("Unknown Mode...Skip...");
+		return 0;
+	}
+
+	if (wd->wlanMode == ZM_MODE_AP) {
+		u16_t vapId;
+
+		vapId = zfwGetVapId(dev);
+
+		if (vapId == 0xffff) {
+			/* AP mode */
+			zfApInitStaTbl(dev);
+
+			/* AP default parameters */
+			wd->bRate = 0xf;
+			wd->gRate = 0xff;
+			wd->bRateBasic = 0xf;
+			wd->gRateBasic = 0x0;
+			/* wd->beaconInterval = 100; */
+			wd->ap.apBitmap = 1;
+			wd->ap.beaconCounter = 0;
+			/* wd->ap.vapNumber = 1; //mark by ygwei for Vap */
+
+			wd->ap.hideSsid[0] = 0;
+			wd->ap.staAgingTimeSec = 10*60;
+			wd->ap.staProbingTimeSec = 60;
+
+			for (i = 0; i < ZM_MAX_AP_SUPPORT; i++)
+				wd->ap.bcmcHead[i] = wd->ap.bcmcTail[i] = 0;
+
+			/* wd->ap.uniHead = wd->ap.uniTail = 0; */
+
+			/* load AP parameters */
+			wd->bRateBasic = wd->ws.bRateBasic;
+			wd->gRateBasic = wd->ws.gRateBasic;
+			wd->bgMode = wd->ws.bgMode;
+			if ((wd->ws.ssidLen <= 32) && (wd->ws.ssidLen != 0)) {
+				wd->ap.ssidLen[0] = wd->ws.ssidLen;
+				for (i = 0; i < wd->ws.ssidLen; i++)
+					wd->ap.ssid[0][i] = wd->ws.ssid[i];
+				wd->ws.ssidLen = 0; /* Reset Wrapper Variable */
+			}
+
+			if (wd->ap.encryMode[0] == 0)
+				wd->ap.capab[0] = 0x001;
+			else
+				wd->ap.capab[0] = 0x011;
+			/* set Short Slot Time bit if not 11b */
+			if (wd->ap.wlanType[0] != ZM_WLAN_TYPE_PURE_B)
+				wd->ap.capab[0] |= 0x400;
+
+			/* wd->ap.vapNumber = 1; //mark by ygwei for Vap Test */
+		} else {
 #if 0
-            /* VAP Test Code */
-            wd->ap.apBitmap = 0x3;
-            wd->ap.capab[1] = 0x401;
-            wd->ap.ssidLen[1] = 4;
-            wd->ap.ssid[1][0] = 'v';
-            wd->ap.ssid[1][1] = 'a';
-            wd->ap.ssid[1][2] = 'p';
-            wd->ap.ssid[1][3] = '1';
-            wd->ap.authAlgo[1] = wd->ws.authMode;
-            wd->ap.encryMode[1] = wd->ws.encryMode;
-            wd->ap.vapNumber = 2;
+			/* VAP Test Code */
+			wd->ap.apBitmap = 0x3;
+			wd->ap.capab[1] = 0x401;
+			wd->ap.ssidLen[1] = 4;
+			wd->ap.ssid[1][0] = 'v';
+			wd->ap.ssid[1][1] = 'a';
+			wd->ap.ssid[1][2] = 'p';
+			wd->ap.ssid[1][3] = '1';
+			wd->ap.authAlgo[1] = wd->ws.authMode;
+			wd->ap.encryMode[1] = wd->ws.encryMode;
+			wd->ap.vapNumber = 2;
 #else
-            /* VAP Test Code */
-            wd->ap.apBitmap = 0x1 | (0x01 << (vapId+1));
-
-            if ((wd->ws.ssidLen <= 32) && (wd->ws.ssidLen != 0))
-            {
-                wd->ap.ssidLen[vapId+1] = wd->ws.ssidLen;
-                for(i=0; i<wd->ws.ssidLen; i++)
-                {
-                    wd->ap.ssid[vapId+1][i] = wd->ws.ssid[i];
-                }
-                wd->ws.ssidLen = 0; // Reset Wrapper Variable
-            }
-
-            if (wd->ap.encryMode[vapId+1] == 0)
-            {
-                wd->ap.capab[vapId+1] = 0x401;
-            }
-            else
-            {
-                wd->ap.capab[vapId+1] = 0x411;
-            }
-
-            wd->ap.authAlgo[vapId+1] = wd->ws.authMode;
-            wd->ap.encryMode[vapId+1] = wd->ws.encryMode;
-
-            /* Need to be modified when VAP is used */
-            //wd->ap.vapNumber = 2;
+			/* VAP Test Code */
+			wd->ap.apBitmap = 0x1 | (0x01 << (vapId+1));
+
+			if ((wd->ws.ssidLen <= 32) && (wd->ws.ssidLen != 0)) {
+				wd->ap.ssidLen[vapId+1] = wd->ws.ssidLen;
+				for (i = 0; i < wd->ws.ssidLen; i++)
+					wd->ap.ssid[vapId+1][i] =
+								wd->ws.ssid[i];
+				wd->ws.ssidLen = 0; /* Reset Wrapper Variable */
+			}
+
+			if (wd->ap.encryMode[vapId+1] == 0)
+				wd->ap.capab[vapId+1] = 0x401;
+			else
+				wd->ap.capab[vapId+1] = 0x411;
+
+			wd->ap.authAlgo[vapId+1] = wd->ws.authMode;
+			wd->ap.encryMode[vapId+1] = wd->ws.encryMode;
+
+			/* Need to be modified when VAP is used */
+			/* wd->ap.vapNumber = 2; */
 #endif
-        }
-
-        wd->ap.vapNumber++;
-
-        zfCoreSetFrequency(dev, wd->frequency);
-
-        zfInitMacApMode(dev);
-
-        /* Disable protection mode */
-        zfApSetProtectionMode(dev, 0);
-
-        zfApSendBeacon(dev);
-    } /*if (wd->wlanMode == ZM_MODE_AP) */
-    else
-    {
-        zfScanMgrScanStop(dev, ZM_SCAN_MGR_SCAN_INTERNAL);
-        zfScanMgrScanStop(dev, ZM_SCAN_MGR_SCAN_EXTERNAL);
-
-        zmw_enter_critical_section(dev);
-        wd->sta.oppositeCount = 0;    /* reset opposite count */
-        //wd->sta.bAutoReconnect = wd->sta.bAutoReconnectEnabled;
-        //wd->sta.scanWithSSID = 0;
-        zfStaInitOppositeInfo(dev);
-        zmw_leave_critical_section(dev);
-
-        zfStaResetStatus(dev, 0);
-
-        if ( (wd->sta.cmDisallowSsidLength != 0)&&
-             (wd->sta.ssidLen == wd->sta.cmDisallowSsidLength)&&
-             (zfMemoryIsEqual(wd->sta.ssid, wd->sta.cmDisallowSsid,
-                              wd->sta.ssidLen)) &&
-             (wd->sta.wepStatus == ZM_ENCRYPTION_TKIP))
-        {   /* countermeasures */
-            zm_debug_msg0("countermeasures disallow association");
-
-        }
-        else
-        {
-            switch( wd->wlanMode )
-            {
-                case ZM_MODE_IBSS:
-                    /* some registers may be set here */
-                    if ( wd->sta.authMode == ZM_AUTH_MODE_WPA2PSK )
-                    {
-                        zfHpSetApStaMode(dev, ZM_HAL_80211_MODE_IBSS_WPA2PSK);
-                    }
-                    else
-                    {
-                        zfHpSetApStaMode(dev, ZM_HAL_80211_MODE_IBSS_GENERAL);
-                    }
-
-                    zm_msg0_mm(ZM_LV_0, "ZM_MODE_IBSS");
-                    zfIbssConnectNetwork(dev);
-                    break;
-
-                case ZM_MODE_INFRASTRUCTURE:
-                    /* some registers may be set here */
-                    zfHpSetApStaMode(dev, ZM_HAL_80211_MODE_STA);
-
-                    zfInfraConnectNetwork(dev);
-                    break;
-
-                case ZM_MODE_PSEUDO:
-                    /* some registers may be set here */
-                    zfHpSetApStaMode(dev, ZM_HAL_80211_MODE_STA);
-
-                    zfUpdateBssid(dev, bssid);
-                    zfCoreSetFrequency(dev, wd->frequency);
-                    break;
-
-                default:
-                    break;
-            }
-        }
-
-    }
-
-
-    //if ( (wd->wlanMode != ZM_MODE_INFRASTRUCTURE)&&
-    //     (wd->wlanMode != ZM_MODE_AP) )
-    if ( wd->wlanMode == ZM_MODE_PSEUDO )
-    {
-        /* Reset Wlan status */
-        zfWlanReset(dev);
-
-        if (wd->zfcbConnectNotify != NULL)
-        {
-            wd->zfcbConnectNotify(dev, ZM_STATUS_MEDIA_CONNECT, wd->sta.bssid);
-        }
-        zfChangeAdapterState(dev, ZM_STA_STATE_CONNECTED);
-    }
-
-
-    if(wd->wlanMode == ZM_MODE_AP)
-    {
-        if (wd->zfcbConnectNotify != NULL)
-        {
-            wd->zfcbConnectNotify(dev, ZM_STATUS_MEDIA_CONNECT, wd->sta.bssid);
-        }
-        //zfChangeAdapterState(dev, ZM_STA_STATE_CONNECTED);
-    }
-
-    // Assign default Tx Rate
-    if ( wd->sta.EnableHT )
-    {
+		}
+
+		wd->ap.vapNumber++;
+
+		zfCoreSetFrequency(dev, wd->frequency);
+
+		zfInitMacApMode(dev);
+
+		/* Disable protection mode */
+		zfApSetProtectionMode(dev, 0);
+
+		zfApSendBeacon(dev);
+	} else { /*if (wd->wlanMode == ZM_MODE_AP) */
+
+		zfScanMgrScanStop(dev, ZM_SCAN_MGR_SCAN_INTERNAL);
+		zfScanMgrScanStop(dev, ZM_SCAN_MGR_SCAN_EXTERNAL);
+
+		zmw_enter_critical_section(dev);
+		wd->sta.oppositeCount = 0;    /* reset opposite count */
+		/* wd->sta.bAutoReconnect = wd->sta.bAutoReconnectEnabled; */
+		/* wd->sta.scanWithSSID = 0; */
+		zfStaInitOppositeInfo(dev);
+		zmw_leave_critical_section(dev);
+
+		zfStaResetStatus(dev, 0);
+
+		if ((wd->sta.cmDisallowSsidLength != 0) &&
+		(wd->sta.ssidLen == wd->sta.cmDisallowSsidLength) &&
+		(zfMemoryIsEqual(wd->sta.ssid, wd->sta.cmDisallowSsid,
+		wd->sta.ssidLen)) &&
+		(wd->sta.wepStatus == ZM_ENCRYPTION_TKIP)) {/*countermeasures*/
+			zm_debug_msg0("countermeasures disallow association");
+		} else {
+			switch (wd->wlanMode) {
+			case ZM_MODE_IBSS:
+				/* some registers may be set here */
+				if (wd->sta.authMode == ZM_AUTH_MODE_WPA2PSK)
+					zfHpSetApStaMode(dev,
+					ZM_HAL_80211_MODE_IBSS_WPA2PSK);
+				else
+					zfHpSetApStaMode(dev,
+					ZM_HAL_80211_MODE_IBSS_GENERAL);
+
+				zm_msg0_mm(ZM_LV_0, "ZM_MODE_IBSS");
+				zfIbssConnectNetwork(dev);
+				break;
+
+			case ZM_MODE_INFRASTRUCTURE:
+				/* some registers may be set here */
+				zfHpSetApStaMode(dev, ZM_HAL_80211_MODE_STA);
+
+				zfInfraConnectNetwork(dev);
+				break;
+
+			case ZM_MODE_PSEUDO:
+				/* some registers may be set here */
+				zfHpSetApStaMode(dev, ZM_HAL_80211_MODE_STA);
+
+				zfUpdateBssid(dev, bssid);
+				zfCoreSetFrequency(dev, wd->frequency);
+				break;
+
+			default:
+				break;
+			}
+		}
+
+	}
+
+
+	/* if ((wd->wlanMode != ZM_MODE_INFRASTRUCTURE) &&
+		(wd->wlanMode != ZM_MODE_AP))
+	*/
+	if (wd->wlanMode == ZM_MODE_PSEUDO) {
+		/* Reset Wlan status */
+		zfWlanReset(dev);
+
+		if (wd->zfcbConnectNotify != NULL)
+			wd->zfcbConnectNotify(dev, ZM_STATUS_MEDIA_CONNECT,
+								wd->sta.bssid);
+		zfChangeAdapterState(dev, ZM_STA_STATE_CONNECTED);
+	}
+
+
+	if (wd->wlanMode == ZM_MODE_AP) {
+		if (wd->zfcbConnectNotify != NULL)
+			wd->zfcbConnectNotify(dev, ZM_STATUS_MEDIA_CONNECT,
+								wd->sta.bssid);
+		/* zfChangeAdapterState(dev, ZM_STA_STATE_CONNECTED); */
+	}
+
+	/* Assign default Tx Rate */
+	if (wd->sta.EnableHT) {
 		u32_t oneTxStreamCap;
-		oneTxStreamCap = (zfHpCapability(dev) & ZM_HP_CAP_11N_ONE_TX_STREAM);
-		if(oneTxStreamCap)
+		oneTxStreamCap = (zfHpCapability(dev) &
+						ZM_HP_CAP_11N_ONE_TX_STREAM);
+		if (oneTxStreamCap)
 			wd->CurrentTxRateKbps = 135000;
 		else
 			wd->CurrentTxRateKbps = 270000;
-        wd->CurrentRxRateKbps = 270000;
-    }
-    else
-    {
-        wd->CurrentTxRateKbps = 54000;
-        wd->CurrentRxRateKbps = 54000;
-    }
+		wd->CurrentRxRateKbps = 270000;
+	} else {
+		wd->CurrentTxRateKbps = 54000;
+		wd->CurrentRxRateKbps = 54000;
+	}
 
-    wd->state = ZM_WLAN_STATE_ENABLED;
+	wd->state = ZM_WLAN_STATE_ENABLED;
 
-    return 0;
+	return 0;
 }
 
 /* Enable/disable Wlan operation */
-u16_t zfiWlanEnable(zdev_t* dev)
+u16_t zfiWlanEnable(zdev_t *dev)
 {
-    u16_t ret;
+	u16_t ret;
 
-    zmw_get_wlan_dev(dev);
+	zmw_get_wlan_dev(dev);
 
-    zm_msg0_mm(ZM_LV_1, "Enable Wlan");
+	zm_msg0_mm(ZM_LV_1, "Enable Wlan");
 
-    zfGetWrapperSetting(dev);
+	zfGetWrapperSetting(dev);
 
-    zfZeroMemory((u8_t*) &wd->trafTally, sizeof(struct zsTrafTally));
+	zfZeroMemory((u8_t *) &wd->trafTally, sizeof(struct zsTrafTally));
+
+	/* Reset cmMicFailureCount to 0 for new association request */
+	if (wd->sta.cmMicFailureCount == 1) {
+		zfTimerCancel(dev, ZM_EVENT_CM_TIMER);
+		wd->sta.cmMicFailureCount = 0;
+	}
 
-    // Reset cmMicFailureCount to 0 for new association request
-    if ( wd->sta.cmMicFailureCount == 1 )
-    {
-        zfTimerCancel(dev, ZM_EVENT_CM_TIMER);
-        wd->sta.cmMicFailureCount = 0;
-    }
+	zfFlushVtxq(dev);
+	if ((wd->queueFlushed & 0x10) != 0)
+		zfHpUsbReset(dev);
 
-    zfFlushVtxq(dev);
-    if ((wd->queueFlushed & 0x10) != 0)
-    {
-        zfHpUsbReset(dev);
-    }
-    ret = zfWlanEnable(dev);
+	ret = zfWlanEnable(dev);
 
-    return ret;
+	return ret;
 }
 /* Add a flag named ResetKeyCache to show if KeyCache should be cleared.
    for hostapd in AP mode, if driver receives iwconfig ioctl
-   after setting group key, it shouldn't clear KeyCache.                 */
-u16_t zfiWlanDisable(zdev_t* dev, u8_t ResetKeyCache)
+   after setting group key, it shouldn't clear KeyCache.
+*/
+u16_t zfiWlanDisable(zdev_t *dev, u8_t ResetKeyCache)
 {
-    u16_t  i;
-    u8_t isConnected;
+	u16_t  i;
+	u8_t isConnected;
 
-    zmw_get_wlan_dev(dev);
+	zmw_get_wlan_dev(dev);
 
 #ifdef ZM_ENABLE_IBSS_WPA2PSK
-    zmw_declare_for_critical_section();
+	zmw_declare_for_critical_section();
 #endif
-    wd->state = ZM_WLAN_STATE_DISABLED;
-
-    zm_msg0_mm(ZM_LV_1, "Disable Wlan");
-
-    if ( wd->wlanMode != ZM_MODE_AP )
-    {
-        isConnected = zfStaIsConnected(dev);
-
-        if ( (wd->wlanMode == ZM_MODE_INFRASTRUCTURE)&&
-             (wd->sta.currentAuthMode != ZM_AUTH_MODE_WPA2) )
-        {
-            /* send deauthentication frame */
-            if (isConnected)
-            {
-                //zfiWlanDeauth(dev, NULL, 0);
-                zfSendMmFrame(dev, ZM_WLAN_FRAME_TYPE_DEAUTH, wd->sta.bssid, 3, 0, 0);
-                //zmw_debug_msg0("send a Deauth frame!");
-            }
-        }
-
-        // Remove all the connected peer stations
-        if ( wd->wlanMode == ZM_MODE_IBSS )
-        {
-            wd->sta.ibssBssIsCreator = 0;
-            zfTimerCancel(dev, ZM_EVENT_IBSS_MONITOR);
-            zfStaIbssMonitoring(dev, 1);
-        }
+	wd->state = ZM_WLAN_STATE_DISABLED;
+
+	zm_msg0_mm(ZM_LV_1, "Disable Wlan");
+
+	if (wd->wlanMode != ZM_MODE_AP) {
+		isConnected = zfStaIsConnected(dev);
+
+		if ((wd->wlanMode == ZM_MODE_INFRASTRUCTURE) &&
+			(wd->sta.currentAuthMode != ZM_AUTH_MODE_WPA2)) {
+			/* send deauthentication frame */
+			if (isConnected) {
+				/* zfiWlanDeauth(dev, NULL, 0); */
+				zfSendMmFrame(dev, ZM_WLAN_FRAME_TYPE_DEAUTH,
+						wd->sta.bssid, 3, 0, 0);
+				/* zmw_debug_msg0("send a Deauth frame!"); */
+			}
+		}
+
+		/* Remove all the connected peer stations */
+		if (wd->wlanMode == ZM_MODE_IBSS) {
+			wd->sta.ibssBssIsCreator = 0;
+			zfTimerCancel(dev, ZM_EVENT_IBSS_MONITOR);
+			zfStaIbssMonitoring(dev, 1);
+		}
 
 #ifdef ZM_ENABLE_IBSS_WPA2PSK
-        zmw_enter_critical_section(dev);
-        wd->sta.ibssWpa2Psk = 0;
-        zmw_leave_critical_section(dev);
+		zmw_enter_critical_section(dev);
+		wd->sta.ibssWpa2Psk = 0;
+		zmw_leave_critical_section(dev);
 #endif
 
-        wd->sta.wpaState = ZM_STA_WPA_STATE_INIT;
-
-        /* reset connect timeout counter */
-        wd->sta.connectTimeoutCount = 0;
-
-        /* reset connectState to None */
-        wd->sta.connectState = ZM_STA_CONN_STATE_NONE;
-
-        /* reset leap enable variable */
-        wd->sta.leapEnabled = 0;
-
-        /* Disable the RIFS Status / RIFS-like frame count / RIFS count */
-        if( wd->sta.rifsState == ZM_RIFS_STATE_DETECTED )
-            zfHpDisableRifs(dev);
-        wd->sta.rifsState = ZM_RIFS_STATE_DETECTING;
-        wd->sta.rifsLikeFrameCnt = 0;
-        wd->sta.rifsCount = 0;
-
-        wd->sta.osRxFilter = 0;
-        wd->sta.bSafeMode = 0;
-
-        zfChangeAdapterState(dev, ZM_STA_STATE_DISCONNECT);
-        if (ResetKeyCache)
-            zfHpResetKeyCache(dev);
-
-        if (isConnected)
-        {
-            if (wd->zfcbConnectNotify != NULL)
-            {
-                wd->zfcbConnectNotify(dev, ZM_STATUS_MEDIA_CONNECTION_DISABLED, wd->sta.bssid);
-            }
-        }
-        else
-        {
-            if (wd->zfcbConnectNotify != NULL)
-            {
-                wd->zfcbConnectNotify(dev, ZM_STATUS_MEDIA_DISABLED, wd->sta.bssid);
-            }
-        }
-    }
-    else //if (wd->wlanMode == ZM_MODE_AP)
-    {
-        for (i=0; i<ZM_MAX_STA_SUPPORT; i++)
-        {
-            /* send deauthentication frame */
-            if (wd->ap.staTable[i].valid == 1)
-            {
-                /* Reason : Sending station is leaving */
-                zfSendMmFrame(dev, ZM_WLAN_FRAME_TYPE_DEAUTH,
-                        wd->ap.staTable[i].addr, 3, 0, 0);
-            }
-        }
-
-        if (ResetKeyCache)
-            zfHpResetKeyCache(dev);
-
-        wd->ap.vapNumber--;
-    }
-
-    /* stop beacon */
-    zfHpDisableBeacon(dev);
-
-    /* Flush VTxQ and MmQ */
-    zfFlushVtxq(dev);
-    /* Flush AP PS queues */
-    zfApFlushBufferedPsFrame(dev);
-    /* Free buffer in defragment list*/
-    zfAgingDefragList(dev, 1);
-
-    #ifdef ZM_ENABLE_AGGREGATION
-    /* add by honda */
-    zfAggRxFreeBuf(dev, 0);  //1 for release structure memory
-    /* end of add by honda */
-    #endif
-
-    // Clear the information for the peer stations of IBSS or AP of Station mode
-    zfZeroMemory((u8_t*)wd->sta.oppositeInfo, sizeof(struct zsOppositeInfo) * ZM_MAX_OPPOSITE_COUNT);
-
-    /* Turn off Software WEP/TKIP */
-    if (wd->sta.SWEncryptEnable != 0)
-    {
-        zm_debug_msg0("Disable software encryption");
-        zfStaDisableSWEncryption(dev);
-    }
-
-    /* Improve WEP/TKIP performace with HT AP, detail information please look bug#32495 */
-    //zfHpSetTTSIFSTime(dev, 0x8);
-
-    return 0;
-}
+		wd->sta.wpaState = ZM_STA_WPA_STATE_INIT;
+
+		/* reset connect timeout counter */
+		wd->sta.connectTimeoutCount = 0;
+
+		/* reset connectState to None */
+		wd->sta.connectState = ZM_STA_CONN_STATE_NONE;
+
+		/* reset leap enable variable */
+		wd->sta.leapEnabled = 0;
+
+		/* Disable the RIFS Status/RIFS-like frame count/RIFS count */
+		if (wd->sta.rifsState == ZM_RIFS_STATE_DETECTED)
+			zfHpDisableRifs(dev);
+		wd->sta.rifsState = ZM_RIFS_STATE_DETECTING;
+		wd->sta.rifsLikeFrameCnt = 0;
+		wd->sta.rifsCount = 0;
+
+		wd->sta.osRxFilter = 0;
+		wd->sta.bSafeMode = 0;
+
+		zfChangeAdapterState(dev, ZM_STA_STATE_DISCONNECT);
+		if (ResetKeyCache)
+			zfHpResetKeyCache(dev);
+
+		if (isConnected) {
+			if (wd->zfcbConnectNotify != NULL)
+				wd->zfcbConnectNotify(dev,
+				ZM_STATUS_MEDIA_CONNECTION_DISABLED,
+				wd->sta.bssid);
+		} else {
+			if (wd->zfcbConnectNotify != NULL)
+				wd->zfcbConnectNotify(dev,
+				ZM_STATUS_MEDIA_DISABLED, wd->sta.bssid);
+		}
+	} else { /* if (wd->wlanMode == ZM_MODE_AP) */
+		for (i = 0; i < ZM_MAX_STA_SUPPORT; i++) {
+			/* send deauthentication frame */
+			if (wd->ap.staTable[i].valid == 1) {
+				/* Reason : Sending station is leaving */
+				zfSendMmFrame(dev, ZM_WLAN_FRAME_TYPE_DEAUTH,
+				wd->ap.staTable[i].addr, 3, 0, 0);
+			}
+		}
+
+		if (ResetKeyCache)
+			zfHpResetKeyCache(dev);
+
+		wd->ap.vapNumber--;
+	}
 
-u16_t zfiWlanSuspend(zdev_t* dev)
-{
-    zmw_get_wlan_dev(dev);
-    zmw_declare_for_critical_section();
+	/* stop beacon */
+	zfHpDisableBeacon(dev);
+
+	/* Flush VTxQ and MmQ */
+	zfFlushVtxq(dev);
+	/* Flush AP PS queues */
+	zfApFlushBufferedPsFrame(dev);
+	/* Free buffer in defragment list*/
+	zfAgingDefragList(dev, 1);
+
+#ifdef ZM_ENABLE_AGGREGATION
+	/* add by honda */
+	zfAggRxFreeBuf(dev, 0);  /* 1 for release structure memory */
+	/* end of add by honda */
+#endif
+
+	/* Clear the information for the peer stations
+	of IBSS or AP of Station mode
+	*/
+	zfZeroMemory((u8_t *)wd->sta.oppositeInfo,
+			sizeof(struct zsOppositeInfo) * ZM_MAX_OPPOSITE_COUNT);
 
-    // Change the HAL state to init so that any packet can't be transmitted between
-    // resume & HAL reinit. This would cause the chip hang issue in OTUS.
-    zmw_enter_critical_section(dev);
-    wd->halState = ZM_HAL_STATE_INIT;
-    zmw_leave_critical_section(dev);
+	/* Turn off Software WEP/TKIP */
+	if (wd->sta.SWEncryptEnable != 0) {
+		zm_debug_msg0("Disable software encryption");
+		zfStaDisableSWEncryption(dev);
+	}
+
+	/* Improve WEP/TKIP performace with HT AP,
+	detail information please look bug#32495 */
+	/* zfHpSetTTSIFSTime(dev, 0x8); */
+
+	return 0;
+}
 
-    return 0;
+u16_t zfiWlanSuspend(zdev_t *dev)
+{
+	zmw_get_wlan_dev(dev);
+	zmw_declare_for_critical_section();
+
+	/* Change the HAL state to init so that any packet
+	can't be transmitted between resume & HAL reinit.
+	This would cause the chip hang issue in OTUS.
+	*/
+	zmw_enter_critical_section(dev);
+	wd->halState = ZM_HAL_STATE_INIT;
+	zmw_leave_critical_section(dev);
+
+	return 0;
 }
 
-u16_t zfiWlanResume(zdev_t* dev, u8_t doReconn)
+u16_t zfiWlanResume(zdev_t *dev, u8_t doReconn)
 {
-    u16_t ret;
-    zmw_get_wlan_dev(dev);
-    zmw_declare_for_critical_section();
-
-    /* Redownload firmware, Reinit MAC,PHY,RF */
-    zfHpReinit(dev, wd->frequency);
-
-    //Set channel according to AP's configuration
-    zfCoreSetFrequencyExV2(dev, wd->frequency, wd->BandWidth40,
-            wd->ExtOffset, NULL, 1);
-
-    zfHpSetMacAddress(dev, wd->macAddr, 0);
-
-    /* Start Rx */
-    zfHpStartRecv(dev);
-
-    zfFlushVtxq(dev);
-
-    if ( wd->wlanMode != ZM_MODE_INFRASTRUCTURE &&
-         wd->wlanMode != ZM_MODE_IBSS )
-    {
-        return 1;
-    }
-
-    zm_msg0_mm(ZM_LV_1, "Resume Wlan");
-    if ( (zfStaIsConnected(dev)) || (zfStaIsConnecting(dev)) )
-    {
-        if (doReconn == 1)
-        {
-            zm_msg0_mm(ZM_LV_1, "Re-connect...");
-            zmw_enter_critical_section(dev);
-            wd->sta.connectByReasso = FALSE;
-            zmw_leave_critical_section(dev);
-
-            zfWlanEnable(dev);
-        }
-        else if (doReconn == 0)
-        {
-            zfHpSetRollCallTable(dev);
-        }
-    }
-
-    ret = 0;
-
-    return ret;
+	u16_t ret;
+	zmw_get_wlan_dev(dev);
+	zmw_declare_for_critical_section();
+
+	/* Redownload firmware, Reinit MAC,PHY,RF */
+	zfHpReinit(dev, wd->frequency);
+
+	/* Set channel according to AP's configuration */
+	zfCoreSetFrequencyExV2(dev, wd->frequency, wd->BandWidth40,
+		wd->ExtOffset, NULL, 1);
+
+	zfHpSetMacAddress(dev, wd->macAddr, 0);
+
+	/* Start Rx */
+	zfHpStartRecv(dev);
+
+	zfFlushVtxq(dev);
+
+	if (wd->wlanMode != ZM_MODE_INFRASTRUCTURE &&
+			wd->wlanMode != ZM_MODE_IBSS)
+		return 1;
+
+	zm_msg0_mm(ZM_LV_1, "Resume Wlan");
+	if ((zfStaIsConnected(dev)) || (zfStaIsConnecting(dev))) {
+		if (doReconn == 1) {
+			zm_msg0_mm(ZM_LV_1, "Re-connect...");
+			zmw_enter_critical_section(dev);
+			wd->sta.connectByReasso = FALSE;
+			zmw_leave_critical_section(dev);
+
+			zfWlanEnable(dev);
+		} else if (doReconn == 0)
+			zfHpSetRollCallTable(dev);
+	}
+
+	ret = 0;
+
+	return ret;
 }
 
 /************************************************************************/
@@ -1057,235 +979,227 @@ u16_t zfiWlanResume(zdev_t* dev, u8_t doReconn)
 /*      Stephen Chen        Atheros Communications, INC.    2007.1      */
 /*                                                                      */
 /************************************************************************/
-void zfiWlanFlushAllQueuedBuffers(zdev_t* dev)
+void zfiWlanFlushAllQueuedBuffers(zdev_t *dev)
 {
-    /* Flush VTxQ and MmQ */
-    zfFlushVtxq(dev);
-    /* Flush AP PS queues */
-    zfApFlushBufferedPsFrame(dev);
-    /* Free buffer in defragment list*/
-    zfAgingDefragList(dev, 1);
+	/* Flush VTxQ and MmQ */
+	zfFlushVtxq(dev);
+	/* Flush AP PS queues */
+	zfApFlushBufferedPsFrame(dev);
+	/* Free buffer in defragment list*/
+	zfAgingDefragList(dev, 1);
 }
 
 /* Do WLAN site survey */
-u16_t zfiWlanScan(zdev_t* dev)
+u16_t zfiWlanScan(zdev_t *dev)
 {
-    u16_t ret = 1;
-    zmw_get_wlan_dev(dev);
-
-    zm_debug_msg0("");
-
-    zmw_declare_for_critical_section();
-
-    zmw_enter_critical_section(dev);
-
-    if (wd->wlanMode == ZM_MODE_AP)
-    {
-        wd->heartBeatNotification |= ZM_BSSID_LIST_SCAN;
-        wd->sta.scanFrequency = 0;
-        //wd->sta.pUpdateBssList->bssCount = 0;
-        ret = 0;
-    }
-    else
-    {
-        #if 0
-        if ( !zfStaBlockWlanScan(dev) )
-        {
-            zm_debug_msg0("scan request");
-            //zfTimerSchedule(dev, ZM_EVENT_SCAN, ZM_TICK_ZERO);
-            ret = 0;
-            goto start_scan;
-        }
-        #else
-            goto start_scan;
-        #endif
-    }
-
-    zmw_leave_critical_section(dev);
-
-    return ret;
+	u16_t ret = 1;
+	zmw_get_wlan_dev(dev);
+
+	zm_debug_msg0("");
+
+	zmw_declare_for_critical_section();
+
+	zmw_enter_critical_section(dev);
+
+	if (wd->wlanMode == ZM_MODE_AP) {
+		wd->heartBeatNotification |= ZM_BSSID_LIST_SCAN;
+		wd->sta.scanFrequency = 0;
+		/* wd->sta.pUpdateBssList->bssCount = 0; */
+		ret = 0;
+	} else {
+#if 0
+		if (!zfStaBlockWlanScan(dev)) {
+			zm_debug_msg0("scan request");
+			/*zfTimerSchedule(dev, ZM_EVENT_SCAN, ZM_TICK_ZERO);*/
+			ret = 0;
+			goto start_scan;
+		}
+#else
+		goto start_scan;
+#endif
+	}
+
+	zmw_leave_critical_section(dev);
+
+	return ret;
 
 start_scan:
-    zmw_leave_critical_section(dev);
+	zmw_leave_critical_section(dev);
 
-    if(wd->ledStruct.LEDCtrlFlagFromReg & ZM_LED_CTRL_FLAG_ALPHA)   // flag for Alpha
-        wd->ledStruct.LEDCtrlFlag |= ZM_LED_CTRL_FLAG_ALPHA;
+	if (wd->ledStruct.LEDCtrlFlagFromReg & ZM_LED_CTRL_FLAG_ALPHA) {
+		/* flag for Alpha */
+		wd->ledStruct.LEDCtrlFlag |= ZM_LED_CTRL_FLAG_ALPHA;
+	}
 
-    ret = zfScanMgrScanStart(dev, ZM_SCAN_MGR_SCAN_EXTERNAL);
+	ret = zfScanMgrScanStart(dev, ZM_SCAN_MGR_SCAN_EXTERNAL);
 
-    zm_debug_msg1("ret = ", ret);
+	zm_debug_msg1("ret = ", ret);
 
-    return ret;
+	return ret;
 }
 
 
-/* rate         */
-/*    0 : AUTO  */
-/*    1 : CCK 1M */
-/*    2 : CCK 2M */
-/*    3 : CCK 5.5M */
-/*    4 : CCK 11M */
-/*    5 : OFDM 6M */
-/*    6 : OFDM 9M */
-/*    7 : OFDM 12M */
-/*    8 : OFDM 18M */
-/*    9 : OFDM 24M */
-/*    10 : OFDM 36M */
-/*    11 : OFDM 48M */
-/*    12 : OFDM 54M */
-/*    13 : MCS 0 */
-/*    28 : MCS 15 */
+/* rate         	*/
+/*    0 : AUTO  	*/
+/*    1 : CCK 1M 	*/
+/*    2 : CCK 2M 	*/
+/*    3 : CCK 5.5M 	*/
+/*    4 : CCK 11M 	*/
+/*    5 : OFDM 6M 	*/
+/*    6 : OFDM 9M 	*/
+/*    7 : OFDM 12M 	*/
+/*    8 : OFDM 18M 	*/
+/*    9 : OFDM 24M 	*/
+/*    10 : OFDM 36M 	*/
+/*    11 : OFDM 48M 	*/
+/*    12 : OFDM 54M 	*/
+/*    13 : MCS 0 	*/
+/*    28 : MCS 15 	*/
 u16_t zcRateToMCS[] =
     {0xff, 0, 1, 2, 3, 0xb, 0xf, 0xa, 0xe, 0x9, 0xd, 0x8, 0xc};
 u16_t zcRateToMT[] = {0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1};
 
-u16_t zfiWlanSetTxRate(zdev_t* dev, u16_t rate)
-{   // jhlee HT 0
-    zmw_get_wlan_dev(dev);
-
-    if (rate <=12)
-    {
-        wd->txMCS = zcRateToMCS[rate];
-        wd->txMT = zcRateToMT[rate];
-        return ZM_SUCCESS;
-    }
-    else if ((rate<=28)||(rate==13+32))
-    {
-        wd->txMCS = rate - 12 - 1;
-        wd->txMT = 2;
-        return ZM_SUCCESS;
-    }
-
-    return ZM_ERR_INVALID_TX_RATE;
+u16_t zfiWlanSetTxRate(zdev_t *dev, u16_t rate)
+{
+	/* jhlee HT 0 */
+	zmw_get_wlan_dev(dev);
+
+	if (rate <= 12) {
+		wd->txMCS = zcRateToMCS[rate];
+		wd->txMT = zcRateToMT[rate];
+		return ZM_SUCCESS;
+	} else if ((rate <= 28) || (rate == 13 + 32)) {
+		wd->txMCS = rate - 12 - 1;
+		wd->txMT = 2;
+		return ZM_SUCCESS;
+	}
+
+	return ZM_ERR_INVALID_TX_RATE;
 }
 
 const u32_t zcRateIdToKbps40M[] =
-    {
-        1000, 2000, 5500, 11000,                  /* 1M, 2M, 5M, 11M          ,  0  1  2  3*/
-        6000, 9000, 12000, 18000,                 /* 6M  9M  12M  18M         ,  4  5  6  7*/
-        24000, 36000, 48000, 54000,               /* 24M  36M  48M  54M       ,  8  9 10 11*/
-        13500, 27000, 40500, 54000,               /* MCS0 MCS1 MCS2 MCS3      , 12 13 14 15*/
-        81000, 108000, 121500, 135000,            /* MCS4 MCS5 MCS6 MCS7      , 16 17 18 19*/
-        27000, 54000, 81000, 108000,              /* MCS8 MCS9 MCS10 MCS11    , 20 21 22 23*/
-        162000, 216000, 243000, 270000,           /* MCS12 MCS13 MCS14 MCS15  , 24 25 26 27*/
-        270000, 300000, 150000                    /* MCS14SG, MCS15SG, MCS7SG , 28 29 30*/
-    };
+{
+	1000, 2000, 5500, 11000, /* 1M, 2M, 5M, 11M ,  0  1  2  3             */
+	6000, 9000, 12000, 18000, /* 6M  9M  12M  18M ,  4  5  6  7           */
+	24000, 36000, 48000, 54000, /* 24M  36M  48M  54M ,  8  9 10 11       */
+	13500, 27000, 40500, 54000, /* MCS0 MCS1 MCS2 MCS3 , 12 13 14 15      */
+	81000, 108000, 121500, 135000, /* MCS4 MCS5 MCS6 MCS7 , 16 17 18 19   */
+	27000, 54000, 81000, 108000, /* MCS8 MCS9 MCS10 MCS11 , 20 21 22 23   */
+	162000, 216000, 243000, 270000, /*MCS12 MCS13 MCS14 MCS15, 24 25 26 27*/
+	270000, 300000, 150000  /* MCS14SG, MCS15SG, MCS7SG , 28 29 30        */
+};
 
 const u32_t zcRateIdToKbps20M[] =
-    {
-        1000, 2000, 5500, 11000,                  /* 1M, 2M, 5M, 11M          ,  0  1  2  3*/
-        6000, 9000, 12000, 18000,                 /* 6M  9M  12M  18M         ,  4  5  6  7*/
-        24000, 36000, 48000, 54000,               /* 24M  36M  48M  54M       ,  8  9 10 11*/
-        6500, 13000, 19500, 26000,                /* MCS0 MCS1 MCS2 MCS3      , 12 13 14 15*/
-        39000, 52000, 58500, 65000,               /* MCS4 MCS5 MCS6 MCS7      , 16 17 18 19*/
-        13000, 26000, 39000, 52000,               /* MCS8 MCS9 MCS10 MCS11    , 20 21 22 23*/
-        78000, 104000, 117000, 130000,            /* MCS12 MCS13 MCS14 MCS15  , 24 25 26 27*/
-        130000, 144400, 72200                     /* MCS14SG, MCS15SG, MSG7SG , 28 29 30*/
-    };
-
-u32_t zfiWlanQueryTxRate(zdev_t* dev)
 {
-    u8_t rateId = 0xff;
-    zmw_get_wlan_dev(dev);
-    zmw_declare_for_critical_section();
-
-    /* If Tx rate had not been trained, return maximum Tx rate instead */
-    if ((wd->wlanMode == ZM_MODE_INFRASTRUCTURE) && (zfStaIsConnected(dev)))
-    {
-        zmw_enter_critical_section(dev);
-        //Not in fixed rate mode
-        if (wd->txMCS == 0xff)
-        {
-            if ((wd->sta.oppositeInfo[0].rcCell.flag & ZM_RC_TRAINED_BIT) == 0)
-            {
-                rateId = wd->sta.oppositeInfo[0].rcCell.operationRateSet[wd->sta.oppositeInfo[0].rcCell.operationRateCount-1];
-            }
-            else
-            {
-                rateId = wd->sta.oppositeInfo[0].rcCell.operationRateSet[wd->sta.oppositeInfo[0].rcCell.currentRateIndex];
-            }
-        }
-        zmw_leave_critical_section(dev);
-    }
-    if (rateId != 0xff)
-    {
-        if (wd->sta.htCtrlBandwidth)
-        {
-            return zcRateIdToKbps40M[rateId];
-        }
-        else
-        {
-            return zcRateIdToKbps20M[rateId];
-        }
-    }
-    else
-    {
-        return wd->CurrentTxRateKbps;
-    }
+	1000, 2000, 5500, 11000, /* 1M, 2M, 5M, 11M ,  0  1  2  3             */
+	6000, 9000, 12000, 18000, /* 6M  9M  12M  18M  ,  4  5  6  7          */
+	24000, 36000, 48000, 54000, /* 24M  36M  48M  54M ,  8  9 10 11       */
+	6500, 13000, 19500, 26000, /* MCS0 MCS1 MCS2 MCS3 , 12 13 14 15       */
+	39000, 52000, 58500, 65000, /* MCS4 MCS5 MCS6 MCS7 , 16 17 18 19      */
+	13000, 26000, 39000, 52000, /* MCS8 MCS9 MCS10 MCS11 , 20 21 22 23    */
+	78000, 104000, 117000, 130000, /* MCS12 MCS13 MCS14 MCS15, 24 25 26 27*/
+	130000, 144400, 72200  /* MCS14SG, MCS15SG, MSG7SG , 28 29 30         */
+};
+
+u32_t zfiWlanQueryTxRate(zdev_t *dev)
+{
+	u8_t rateId = 0xff;
+	zmw_get_wlan_dev(dev);
+	zmw_declare_for_critical_section();
+
+	/* If Tx rate had not been trained, return maximum Tx rate instead */
+	if ((wd->wlanMode == ZM_MODE_INFRASTRUCTURE) &&
+						(zfStaIsConnected(dev))) {
+		zmw_enter_critical_section(dev);
+		/* Not in fixed rate mode */
+		if (wd->txMCS == 0xff) {
+			if ((wd->sta.oppositeInfo[0].rcCell.flag &
+							ZM_RC_TRAINED_BIT) == 0)
+				rateId = wd->sta.oppositeInfo[0].rcCell. \
+				operationRateSet[wd->sta.oppositeInfo[0]. \
+				rcCell.operationRateCount-1];
+			else
+				rateId = wd->sta.oppositeInfo[0].rcCell. \
+				operationRateSet[wd->sta.oppositeInfo[0]. \
+				rcCell.currentRateIndex];
+		}
+		zmw_leave_critical_section(dev);
+	}
+
+	if (rateId != 0xff) {
+		if (wd->sta.htCtrlBandwidth)
+			return zcRateIdToKbps40M[rateId];
+		else
+			return zcRateIdToKbps20M[rateId];
+	} else
+		return wd->CurrentTxRateKbps;
 }
 
-void zfWlanUpdateRxRate(zdev_t* dev, struct zsAdditionInfo* addInfo)
+void zfWlanUpdateRxRate(zdev_t *dev, struct zsAdditionInfo *addInfo)
 {
-    u32_t rxRateKbps;
-    zmw_get_wlan_dev(dev);
-    //zm_msg1_mm(ZM_LV_0, "addInfo->Tail.Data.RxMacStatus =", addInfo->Tail.Data.RxMacStatus & 0x03);
-
-    /* b5~b4: MPDU indication.                */
-    /*        00: Single MPDU.                */
-    /*        10: First MPDU of A-MPDU.       */
-    /*        11: Middle MPDU of A-MPDU.      */
-    /*        01: Last MPDU of A-MPDU.        */
-    /* Only First MPDU and Single MPDU have PLCP header */
-    /* First MPDU  : (mpduInd & 0x30) == 0x00 */
-    /* Single MPDU : (mpduInd & 0x30) == 0x20 */
-    if ((addInfo->Tail.Data.RxMacStatus & 0x10) == 0)
-    {
-        /* Modulation type */
-        wd->modulationType = addInfo->Tail.Data.RxMacStatus & 0x03;
-        switch(wd->modulationType)
-        {
-    		case 0x0: wd->rateField = addInfo->PlcpHeader[0] & 0xff; //CCK mode
-                      wd->rxInfo = 0;
-                      break;
-    		case 0x1: wd->rateField = addInfo->PlcpHeader[0] & 0x0f; //Legacy-OFDM mode
-                      wd->rxInfo = 0;
-                      break;
-    		case 0x2: wd->rateField = addInfo->PlcpHeader[3]; //HT-OFDM mode
-    		          wd->rxInfo = addInfo->PlcpHeader[6];
-                      break;
-            default: break;
-         }
-
-        rxRateKbps = zfUpdateRxRate(dev);
-        if (wd->CurrentRxRateUpdated == 1)
-        {
-            if (rxRateKbps > wd->CurrentRxRateKbps)
-            {
-                wd->CurrentRxRateKbps = rxRateKbps;
-            }
-        }
-        else
-        {
-            wd->CurrentRxRateKbps = rxRateKbps;
-            wd->CurrentRxRateUpdated = 1;
-        }
-    }
+	u32_t rxRateKbps;
+	zmw_get_wlan_dev(dev);
+	/* zm_msg1_mm(ZM_LV_0, "addInfo->Tail.Data.RxMacStatus =",
+	*  addInfo->Tail.Data.RxMacStatus & 0x03);
+	*/
+
+	/* b5~b4: MPDU indication.                */
+	/*        00: Single MPDU.                */
+	/*        10: First MPDU of A-MPDU.       */
+	/*        11: Middle MPDU of A-MPDU.      */
+	/*        01: Last MPDU of A-MPDU.        */
+	/* Only First MPDU and Single MPDU have PLCP header */
+	/* First MPDU  : (mpduInd & 0x30) == 0x00 */
+	/* Single MPDU : (mpduInd & 0x30) == 0x20 */
+	if ((addInfo->Tail.Data.RxMacStatus & 0x10) == 0) {
+		/* Modulation type */
+		wd->modulationType = addInfo->Tail.Data.RxMacStatus & 0x03;
+		switch (wd->modulationType) {
+		/* CCK mode */
+		case 0x0:
+			wd->rateField = addInfo->PlcpHeader[0] & 0xff;
+			wd->rxInfo = 0;
+			break;
+		/* Legacy-OFDM mode */
+		case 0x1:
+			wd->rateField = addInfo->PlcpHeader[0] & 0x0f;
+			wd->rxInfo = 0;
+			break;
+		/* HT-OFDM mode */
+		case 0x2:
+			wd->rateField = addInfo->PlcpHeader[3];
+			wd->rxInfo = addInfo->PlcpHeader[6];
+			break;
+		default:
+			break;
+		}
+
+		rxRateKbps = zfUpdateRxRate(dev);
+		if (wd->CurrentRxRateUpdated == 1) {
+			if (rxRateKbps > wd->CurrentRxRateKbps)
+				wd->CurrentRxRateKbps = rxRateKbps;
+		} else {
+			wd->CurrentRxRateKbps = rxRateKbps;
+			wd->CurrentRxRateUpdated = 1;
+		}
+	}
 }
+
 #if 0
 u16_t zcIndextoRateBG[16] = {1000, 2000, 5500, 11000, 0, 0, 0, 0, 48000,
-                               24000, 12000, 6000, 54000, 36000, 18000, 9000};
+			24000, 12000, 6000, 54000, 36000, 18000, 9000};
 u32_t zcIndextoRateN20L[16] = {6500, 13000, 19500, 26000, 39000, 52000, 58500,
-                              65000, 13000, 26000, 39000, 52000, 78000, 104000,
-                              117000, 130000};
+			65000, 13000, 26000, 39000, 52000, 78000, 104000,
+			117000, 130000};
 u32_t zcIndextoRateN20S[16] = {7200, 14400, 21700, 28900, 43300, 57800, 65000,
-                              72200, 14400, 28900, 43300, 57800, 86700, 115600,
-                              130000, 144400};
-u32_t zcIndextoRateN40L[16] = {13500, 27000, 40500, 54000, 81000, 108000, 121500,
-                              135000, 27000, 54000, 81000, 108000, 162000, 216000,
-                              243000, 270000};
-u32_t zcIndextoRateN40S[16] = {15000, 30000, 45000, 60000, 90000, 120000, 135000,
-                              150000, 30000, 60000, 90000, 120000, 180000, 240000,
-                              270000, 300000};
+			72200, 14400, 28900, 43300, 57800, 86700, 115600,
+			130000, 144400};
+u32_t zcIndextoRateN40L[16] = {13500, 27000, 40500, 54000, 81000, 108000,
+			121500, 135000, 27000, 54000, 81000, 108000,
+			162000, 216000, 243000, 270000};
+u32_t zcIndextoRateN40S[16] = {15000, 30000, 45000, 60000, 90000, 120000,
+			135000, 150000, 30000, 60000, 90000, 120000,
+			180000, 240000, 270000, 300000};
 #endif
 
 extern u16_t zcIndextoRateBG[16];
@@ -1294,568 +1208,558 @@ extern u32_t zcIndextoRateN20S[16];
 extern u32_t zcIndextoRateN40L[16];
 extern u32_t zcIndextoRateN40S[16];
 
-u32_t zfiWlanQueryRxRate(zdev_t* dev)
+u32_t zfiWlanQueryRxRate(zdev_t *dev)
 {
-    zmw_get_wlan_dev(dev);
+	zmw_get_wlan_dev(dev);
 
-    wd->CurrentRxRateUpdated = 0;
-    return wd->CurrentRxRateKbps;
+	wd->CurrentRxRateUpdated = 0;
+	return wd->CurrentRxRateKbps;
 }
 
-u32_t zfUpdateRxRate(zdev_t* dev)
+u32_t zfUpdateRxRate(zdev_t *dev)
 {
-    u8_t mcs, bandwidth;
-    u32_t rxRateKbps = 130000;
-    zmw_get_wlan_dev(dev);
-
-    switch (wd->modulationType)
-    {
-		case 0x0: //CCK mode
-                  switch (wd->rateField)
-                  {
-                      case 0x0a: rxRateKbps = 1000;
-                            break;
-                      case 0x14: rxRateKbps = 2000;
-
-                      case 0x37: rxRateKbps = 5500;
-                            break;
-                      case 0x6e: rxRateKbps = 11000;
-                            break;
-                      default:
-                            break;
-                  }
-                  break;
-		case 0x1: //Legacy-OFDM mode
-                  if (wd->rateField <= 15)
-                  {
-                      rxRateKbps = zcIndextoRateBG[wd->rateField];
-                  }
-                  break;
-		case 0x2: //HT-OFDM mode
-		          mcs = wd->rateField & 0x7F;
-		          bandwidth = wd->rateField & 0x80;
-                  if (mcs <= 15)
-                  {
-                      if (bandwidth != 0)
-                      {
-                          if((wd->rxInfo & 0x80) != 0)
-                          {
-                              /* Short GI 40 MHz MIMO Rate */
-                              rxRateKbps = zcIndextoRateN40S[mcs];
-                          }
-                          else
-                          {
-                              /* Long GI 40 MHz MIMO Rate */
-                              rxRateKbps = zcIndextoRateN40L[mcs];
-                          }
-                      }
-                      else
-                      {
-                          if((wd->rxInfo & 0x80) != 0)
-                          {
-                              /* Short GI 20 MHz MIMO Rate */
-                              rxRateKbps = zcIndextoRateN20S[mcs];
-                          }
-                          else
-                          {
-                              /* Long GI 20 MHz MIMO Rate */
-                              rxRateKbps = zcIndextoRateN20L[mcs];
-                          }
-                      }
-                  }
-                  break;
-        default:
-                  break;
-    }
-    //zm_msg1_mm(ZM_LV_0, "wd->CurrentRxRateKbps=", wd->CurrentRxRateKbps);
-
-     // ToDo: use bandwith field to define 40MB
-    return rxRateKbps;
+	u8_t mcs, bandwidth;
+	u32_t rxRateKbps = 130000;
+	zmw_get_wlan_dev(dev);
+
+	switch (wd->modulationType) {
+	/* CCK mode */
+	case 0x0:
+		switch (wd->rateField) {
+		case 0x0a:
+			rxRateKbps = 1000;
+			break;
+		case 0x14:
+			rxRateKbps = 2000;
+
+		case 0x37:
+			rxRateKbps = 5500;
+			break;
+		case 0x6e:
+			rxRateKbps = 11000;
+			break;
+		default:
+			break;
+		}
+		break;
+	/* Legacy-OFDM mode */
+	case 0x1:
+		if (wd->rateField <= 15)
+			rxRateKbps = zcIndextoRateBG[wd->rateField];
+		break;
+	/* HT-OFDM mode */
+	case 0x2:
+		mcs = wd->rateField & 0x7F;
+		bandwidth = wd->rateField & 0x80;
+		if (mcs <= 15) {
+			if (bandwidth != 0) {
+				if ((wd->rxInfo & 0x80) != 0) {
+					/* Short GI 40 MHz MIMO Rate */
+					rxRateKbps = zcIndextoRateN40S[mcs];
+				} else {
+					/* Long GI 40 MHz MIMO Rate */
+					rxRateKbps = zcIndextoRateN40L[mcs];
+				}
+			} else {
+				if ((wd->rxInfo & 0x80) != 0) {
+					/* Short GI 20 MHz MIMO Rate */
+					rxRateKbps = zcIndextoRateN20S[mcs];
+				} else {
+					/* Long GI 20 MHz MIMO Rate */
+					rxRateKbps = zcIndextoRateN20L[mcs];
+				}
+			}
+		}
+		break;
+	default:
+		break;
+	}
+	/*	zm_msg1_mm(ZM_LV_0, "wd->CurrentRxRateKbps=",
+		wd->CurrentRxRateKbps);
+	*/
+
+	/* ToDo: use bandwith field to define 40MB */
+	return rxRateKbps;
 }
 
 /* Get WLAN stastics */
-u16_t zfiWlanGetStatistics(zdev_t* dev)
+u16_t zfiWlanGetStatistics(zdev_t *dev)
 {
-    /* Return link statistics */
-    return 0;
+	/* Return link statistics */
+	return 0;
 }
 
-u16_t zfiWlanReset(zdev_t* dev)
+u16_t zfiWlanReset(zdev_t *dev)
 {
-    zmw_get_wlan_dev(dev);
+	zmw_get_wlan_dev(dev);
 
-    wd->state = ZM_WLAN_STATE_DISABLED;
+	wd->state = ZM_WLAN_STATE_DISABLED;
 
-    return zfWlanReset(dev);
+	return zfWlanReset(dev);
 }
 
 /* Reset WLAN */
-u16_t zfWlanReset(zdev_t* dev)
+u16_t zfWlanReset(zdev_t *dev)
 {
-    u8_t isConnected;
-    zmw_get_wlan_dev(dev);
-
-    zmw_declare_for_critical_section();
-
-    zm_debug_msg0("zfWlanReset");
-
-    isConnected = zfStaIsConnected(dev);
-
-    //if ( wd->wlanMode != ZM_MODE_AP )
-    {
-        if ( (wd->wlanMode == ZM_MODE_INFRASTRUCTURE)&&
-             (wd->sta.currentAuthMode != ZM_AUTH_MODE_WPA2) )
-        {
-            /* send deauthentication frame */
-            if (isConnected)
-            {
-                //zfiWlanDeauth(dev, NULL, 0);
-                zfSendMmFrame(dev, ZM_WLAN_FRAME_TYPE_DEAUTH, wd->sta.bssid, 3, 0, 0);
-                //zmw_debug_msg0("send a Deauth frame!");
-            }
-        }
-    }
-
-    zfChangeAdapterState(dev, ZM_STA_STATE_DISCONNECT);
-    zfHpResetKeyCache(dev);
-
-    if (isConnected)
-    {
-        //zfiWlanDisable(dev);
-        if (wd->zfcbConnectNotify != NULL)
-        {
-            wd->zfcbConnectNotify(dev, ZM_STATUS_MEDIA_CONNECTION_RESET, wd->sta.bssid);
-        }
-    }
-    else
-    {
-        if (wd->zfcbConnectNotify != NULL)
-        {
-            wd->zfcbConnectNotify(dev, ZM_STATUS_MEDIA_RESET, wd->sta.bssid);
-        }
-    }
-
-    /* stop beacon */
-    zfHpDisableBeacon(dev);
-
-    /* Free buffer in defragment list*/
-    zfAgingDefragList(dev, 1);
-
-    /* Flush VTxQ and MmQ */
-    zfFlushVtxq(dev);
-
-    #ifdef ZM_ENABLE_AGGREGATION
-    /* add by honda */
-    zfAggRxFreeBuf(dev, 0);  //1 for release structure memory
-    /* end of add by honda */
-    #endif
-
-    zfStaRefreshBlockList(dev, 1);
-
-    zmw_enter_critical_section(dev);
-
-    zfTimerCancel(dev, ZM_EVENT_IBSS_MONITOR);
-    zfTimerCancel(dev, ZM_EVENT_CM_BLOCK_TIMER);
-    zfTimerCancel(dev, ZM_EVENT_CM_DISCONNECT);
-
-    wd->sta.connectState = ZM_STA_CONN_STATE_NONE;
-    wd->sta.connectByReasso = FALSE;
-    wd->sta.cmDisallowSsidLength = 0;
-    wd->sta.bAutoReconnect = 0;
-    wd->sta.InternalScanReq = 0;
-    wd->sta.encryMode = ZM_NO_WEP;
-    wd->sta.wepStatus = ZM_ENCRYPTION_WEP_DISABLED;
-    wd->sta.wpaState = ZM_STA_WPA_STATE_INIT;
-    wd->sta.cmMicFailureCount = 0;
-    wd->sta.ibssBssIsCreator = 0;
+	u8_t isConnected;
+	zmw_get_wlan_dev(dev);
+
+	zmw_declare_for_critical_section();
+
+	zm_debug_msg0("zfWlanReset");
+
+	isConnected = zfStaIsConnected(dev);
+
+	/* if ( wd->wlanMode != ZM_MODE_AP ) */
+	{
+		if ((wd->wlanMode == ZM_MODE_INFRASTRUCTURE) &&
+		(wd->sta.currentAuthMode != ZM_AUTH_MODE_WPA2)) {
+			/* send deauthentication frame */
+			if (isConnected) {
+				/* zfiWlanDeauth(dev, NULL, 0); */
+				zfSendMmFrame(dev, ZM_WLAN_FRAME_TYPE_DEAUTH,
+						wd->sta.bssid, 3, 0, 0);
+				/* zmw_debug_msg0("send a Deauth frame!"); */
+			}
+		}
+	}
+
+	zfChangeAdapterState(dev, ZM_STA_STATE_DISCONNECT);
+	zfHpResetKeyCache(dev);
+
+	if (isConnected) {
+		/* zfiWlanDisable(dev); */
+		if (wd->zfcbConnectNotify != NULL)
+			wd->zfcbConnectNotify(dev,
+			ZM_STATUS_MEDIA_CONNECTION_RESET, wd->sta.bssid);
+	} else {
+		if (wd->zfcbConnectNotify != NULL)
+			wd->zfcbConnectNotify(dev, ZM_STATUS_MEDIA_RESET,
+								wd->sta.bssid);
+	}
+
+	/* stop beacon */
+	zfHpDisableBeacon(dev);
+
+	/* Free buffer in defragment list*/
+	zfAgingDefragList(dev, 1);
+
+	/* Flush VTxQ and MmQ */
+	zfFlushVtxq(dev);
+
+#ifdef ZM_ENABLE_AGGREGATION
+	/* add by honda */
+	zfAggRxFreeBuf(dev, 0);  /* 1 for release structure memory */
+	/* end of add by honda */
+#endif
+
+	zfStaRefreshBlockList(dev, 1);
+
+	zmw_enter_critical_section(dev);
+
+	zfTimerCancel(dev, ZM_EVENT_IBSS_MONITOR);
+	zfTimerCancel(dev, ZM_EVENT_CM_BLOCK_TIMER);
+	zfTimerCancel(dev, ZM_EVENT_CM_DISCONNECT);
+
+	wd->sta.connectState = ZM_STA_CONN_STATE_NONE;
+	wd->sta.connectByReasso = FALSE;
+	wd->sta.cmDisallowSsidLength = 0;
+	wd->sta.bAutoReconnect = 0;
+	wd->sta.InternalScanReq = 0;
+	wd->sta.encryMode = ZM_NO_WEP;
+	wd->sta.wepStatus = ZM_ENCRYPTION_WEP_DISABLED;
+	wd->sta.wpaState = ZM_STA_WPA_STATE_INIT;
+	wd->sta.cmMicFailureCount = 0;
+	wd->sta.ibssBssIsCreator = 0;
 #ifdef ZM_ENABLE_IBSS_WPA2PSK
-    wd->sta.ibssWpa2Psk = 0;
+	wd->sta.ibssWpa2Psk = 0;
 #endif
-    /* reset connect timeout counter */
-    wd->sta.connectTimeoutCount = 0;
-
-    /* reset leap enable variable */
-    wd->sta.leapEnabled = 0;
-
-    /* Reset the RIFS Status / RIFS-like frame count / RIFS count */
-    if( wd->sta.rifsState == ZM_RIFS_STATE_DETECTED )
-        zfHpDisableRifs(dev);
-    wd->sta.rifsState = ZM_RIFS_STATE_DETECTING;
-    wd->sta.rifsLikeFrameCnt = 0;
-    wd->sta.rifsCount = 0;
-
-    wd->sta.osRxFilter = 0;
-    wd->sta.bSafeMode = 0;
-
-    // Clear the information for the peer stations of IBSS or AP of Station mode
-    zfZeroMemory((u8_t*)wd->sta.oppositeInfo, sizeof(struct zsOppositeInfo) * ZM_MAX_OPPOSITE_COUNT);
-
-    zmw_leave_critical_section(dev);
-
-    zfScanMgrScanStop(dev, ZM_SCAN_MGR_SCAN_INTERNAL);
-    zfScanMgrScanStop(dev, ZM_SCAN_MGR_SCAN_EXTERNAL);
-
-    /* Turn off Software WEP/TKIP */
-    if (wd->sta.SWEncryptEnable != 0)
-    {
-        zm_debug_msg0("Disable software encryption");
-        zfStaDisableSWEncryption(dev);
-    }
-
-    /* Improve WEP/TKIP performace with HT AP, detail information please look bug#32495 */
-    //zfHpSetTTSIFSTime(dev, 0x8);
-
-    /* Keep Pseudo mode */
-    if ( wd->wlanMode != ZM_MODE_PSEUDO )
-    {
-        wd->wlanMode = ZM_MODE_INFRASTRUCTURE;
-    }
-    return 0;
+	/* reset connect timeout counter */
+	wd->sta.connectTimeoutCount = 0;
+
+	/* reset leap enable variable */
+	wd->sta.leapEnabled = 0;
+
+	/* Reset the RIFS Status / RIFS-like frame count / RIFS count */
+	if (wd->sta.rifsState == ZM_RIFS_STATE_DETECTED)
+		zfHpDisableRifs(dev);
+	wd->sta.rifsState = ZM_RIFS_STATE_DETECTING;
+	wd->sta.rifsLikeFrameCnt = 0;
+	wd->sta.rifsCount = 0;
+
+	wd->sta.osRxFilter = 0;
+	wd->sta.bSafeMode = 0;
+
+	/* 	Clear the information for the peer
+		stations of IBSS or AP of Station mode
+	*/
+	zfZeroMemory((u8_t *)wd->sta.oppositeInfo,
+			sizeof(struct zsOppositeInfo) * ZM_MAX_OPPOSITE_COUNT);
+
+	zmw_leave_critical_section(dev);
+
+	zfScanMgrScanStop(dev, ZM_SCAN_MGR_SCAN_INTERNAL);
+	zfScanMgrScanStop(dev, ZM_SCAN_MGR_SCAN_EXTERNAL);
+
+	/* Turn off Software WEP/TKIP */
+	if (wd->sta.SWEncryptEnable != 0) {
+		zm_debug_msg0("Disable software encryption");
+		zfStaDisableSWEncryption(dev);
+	}
+
+	/* 	Improve WEP/TKIP performace with HT AP,
+		detail information please look bug#32495
+	*/
+	/* zfHpSetTTSIFSTime(dev, 0x8); */
+
+	/* Keep Pseudo mode */
+	if (wd->wlanMode != ZM_MODE_PSEUDO)
+		wd->wlanMode = ZM_MODE_INFRASTRUCTURE;
+
+	return 0;
 }
 
 /* Deauthenticate a STA */
-u16_t zfiWlanDeauth(zdev_t* dev, u16_t* macAddr, u16_t reason)
+u16_t zfiWlanDeauth(zdev_t *dev, u16_t *macAddr, u16_t reason)
 {
-    zmw_get_wlan_dev(dev);
-
-    if ( wd->wlanMode == ZM_MODE_AP )
-    {
-        //u16_t id;
-
-        /*
-         * we will reset all key in zfHpResetKeyCache() when call
-         * zfiWlanDisable(), if we want to reset PairwiseKey for each sta,
-         * need to use a nullAddr to let keyindex not match.
-         * otherwise hardware will still find PairwiseKey when AP change
-         * encryption mode from WPA to WEP
-         */
-
-        /*
-        if ((id = zfApFindSta(dev, macAddr)) != 0xffff)
-        {
-            u32_t key[8];
-            u16_t nullAddr[3] = { 0x0, 0x0, 0x0 };
-
-            if (wd->ap.staTable[i].encryMode != ZM_NO_WEP)
-            {
-                zfHpSetApPairwiseKey(dev, nullAddr,
-                        ZM_NO_WEP, &key[0], &key[4], i+1);
-            }
-            //zfHpSetApPairwiseKey(dev, (u16_t *)macAddr,
-            //        ZM_NO_WEP, &key[0], &key[4], id+1);
-            wd->ap.staTable[id].encryMode = ZM_NO_WEP;
-            wd->ap.staTable[id].keyIdx = 0xff;
-        }
-        */
-
-        zfSendMmFrame(dev, ZM_WLAN_FRAME_TYPE_DEAUTH, macAddr, reason, 0, 0);
-    }
-    else
-    {
-        zfSendMmFrame(dev, ZM_WLAN_FRAME_TYPE_DEAUTH, wd->sta.bssid, 3, 0, 0);
-    }
-
-    /* Issue DEAUTH command to FW */
-    return 0;
+	zmw_get_wlan_dev(dev);
+
+	if (wd->wlanMode == ZM_MODE_AP) {
+		/* u16_t id; */
+
+		/*
+		* we will reset all key in zfHpResetKeyCache() when call
+		* zfiWlanDisable(), if we want to reset PairwiseKey for each
+		* sta, need to use a nullAddr to let keyindex not match.
+		* otherwise hardware will still find PairwiseKey when AP change
+		* encryption mode from WPA to WEP
+		*/
+
+		/*
+		if ((id = zfApFindSta(dev, macAddr)) != 0xffff)
+		{
+			u32_t key[8];
+			u16_t nullAddr[3] = { 0x0, 0x0, 0x0 };
+
+			if (wd->ap.staTable[i].encryMode != ZM_NO_WEP)
+			{
+				zfHpSetApPairwiseKey(dev, nullAddr,
+				ZM_NO_WEP, &key[0], &key[4], i+1);
+			}
+			//zfHpSetApPairwiseKey(dev, (u16_t *)macAddr,
+			//        ZM_NO_WEP, &key[0], &key[4], id+1);
+		wd->ap.staTable[id].encryMode = ZM_NO_WEP;
+		wd->ap.staTable[id].keyIdx = 0xff;
+		}
+		*/
+
+		zfSendMmFrame(dev, ZM_WLAN_FRAME_TYPE_DEAUTH, macAddr,
+								reason, 0, 0);
+	} else
+		zfSendMmFrame(dev, ZM_WLAN_FRAME_TYPE_DEAUTH,
+						wd->sta.bssid, 3, 0, 0);
+
+	/* Issue DEAUTH command to FW */
+	return 0;
 }
 
 
 /* XP packet filter feature : */
-/* 1=>enable: All multicast address packets, not just the ones enumerated in the multicast address list. */
+/* 1=>enable: All multicast address packets, not just the ones */
+/* enumerated in the multicast address list. */
 /* 0=>disable */
-void zfiWlanSetAllMulticast(zdev_t* dev, u32_t setting)
+void zfiWlanSetAllMulticast(zdev_t *dev, u32_t setting)
 {
-    zmw_get_wlan_dev(dev);
-    zm_msg1_mm(ZM_LV_0, "sta.bAllMulticast = ", setting);
-    wd->sta.bAllMulticast = (u8_t)setting;
+	zmw_get_wlan_dev(dev);
+	zm_msg1_mm(ZM_LV_0, "sta.bAllMulticast = ", setting);
+	wd->sta.bAllMulticast = (u8_t)setting;
 }
 
 
 /* HT configure API */
-void zfiWlanSetHTCtrl(zdev_t* dev, u32_t *setting, u32_t forceTxTPC)
+void zfiWlanSetHTCtrl(zdev_t *dev, u32_t *setting, u32_t forceTxTPC)
 {
-    zmw_get_wlan_dev(dev);
-
-    wd->preambleType        = (u8_t)setting[0];
-    wd->sta.preambleTypeHT  = (u8_t)setting[1];
-    wd->sta.htCtrlBandwidth = (u8_t)setting[2];
-    wd->sta.htCtrlSTBC      = (u8_t)setting[3];
-    wd->sta.htCtrlSG        = (u8_t)setting[4];
-    wd->sta.defaultTA       = (u8_t)setting[5];
-    wd->enableAggregation   = (u8_t)setting[6];
-    wd->enableWDS           = (u8_t)setting[7];
-
-    wd->forceTxTPC          = forceTxTPC;
+	zmw_get_wlan_dev(dev);
+
+	wd->preambleType        = (u8_t)setting[0];
+	wd->sta.preambleTypeHT  = (u8_t)setting[1];
+	wd->sta.htCtrlBandwidth = (u8_t)setting[2];
+	wd->sta.htCtrlSTBC      = (u8_t)setting[3];
+	wd->sta.htCtrlSG        = (u8_t)setting[4];
+	wd->sta.defaultTA       = (u8_t)setting[5];
+	wd->enableAggregation   = (u8_t)setting[6];
+	wd->enableWDS           = (u8_t)setting[7];
+
+	wd->forceTxTPC          = forceTxTPC;
 }
 
 /* FB50 in OS XP, RD private test code */
-void zfiWlanQueryHTCtrl(zdev_t* dev, u32_t *setting, u32_t *forceTxTPC)
+void zfiWlanQueryHTCtrl(zdev_t *dev, u32_t *setting, u32_t *forceTxTPC)
 {
-    zmw_get_wlan_dev(dev);
-
-    setting[0] = wd->preambleType;
-    setting[1] = wd->sta.preambleTypeHT;
-    setting[2] = wd->sta.htCtrlBandwidth;
-    setting[3] = wd->sta.htCtrlSTBC;
-    setting[4] = wd->sta.htCtrlSG;
-    setting[5] = wd->sta.defaultTA;
-    setting[6] = wd->enableAggregation;
-    setting[7] = wd->enableWDS;
-
-    *forceTxTPC = wd->forceTxTPC;
+	zmw_get_wlan_dev(dev);
+
+	setting[0] = wd->preambleType;
+	setting[1] = wd->sta.preambleTypeHT;
+	setting[2] = wd->sta.htCtrlBandwidth;
+	setting[3] = wd->sta.htCtrlSTBC;
+	setting[4] = wd->sta.htCtrlSG;
+	setting[5] = wd->sta.defaultTA;
+	setting[6] = wd->enableAggregation;
+	setting[7] = wd->enableWDS;
+
+	*forceTxTPC = wd->forceTxTPC;
 }
 
-void zfiWlanDbg(zdev_t* dev, u8_t setting)
+void zfiWlanDbg(zdev_t *dev, u8_t setting)
 {
-    zmw_get_wlan_dev(dev);
+	zmw_get_wlan_dev(dev);
 
-    wd->enableHALDbgInfo = setting;
+	wd->enableHALDbgInfo = setting;
 }
 
 /* FB50 in OS XP, RD private test code */
-void zfiWlanSetRxPacketDump(zdev_t* dev, u32_t setting)
+void zfiWlanSetRxPacketDump(zdev_t *dev, u32_t setting)
 {
-    zmw_get_wlan_dev(dev);
-    if (setting)
-    {
-        wd->rxPacketDump = 1;   /* enable */
-    }
-    else
-    {
-        wd->rxPacketDump = 0;   /* disable */
-    }
+	zmw_get_wlan_dev(dev);
+	if (setting)
+		wd->rxPacketDump = 1;   /* enable */
+	else
+		wd->rxPacketDump = 0;   /* disable */
 }
 
 
 /* FB50 in OS XP, RD private test code */
 /* Tally */
-void zfiWlanResetTally(zdev_t* dev)
+void zfiWlanResetTally(zdev_t *dev)
 {
-    zmw_get_wlan_dev(dev);
-
-    zmw_declare_for_critical_section();
-
-    zmw_enter_critical_section(dev);
-
-	   wd->commTally.txUnicastFrm = 0;		//txUnicastFrames
-	   wd->commTally.txMulticastFrm = 0;		//txMulticastFrames
-	   wd->commTally.txUnicastOctets = 0;	//txUniOctets  byte size
-	   wd->commTally.txMulticastOctets = 0;	//txMultiOctets  byte size
-	   wd->commTally.txFrmUpperNDIS = 0;
-	   wd->commTally.txFrmDrvMgt = 0;
-	   wd->commTally.RetryFailCnt = 0;
-	   wd->commTally.Hw_TotalTxFrm = 0;		//Hardware total Tx Frame
-	   wd->commTally.Hw_RetryCnt = 0;		//txMultipleRetriesFrames
-	   wd->commTally.Hw_UnderrunCnt = 0;//
-	   wd->commTally.DriverRxFrmCnt = 0;//
-	   wd->commTally.rxUnicastFrm = 0;		//rxUnicastFrames
-	   wd->commTally.rxMulticastFrm = 0;	//rxMulticastFrames
-	   wd->commTally.NotifyNDISRxFrmCnt = 0;//
-	   wd->commTally.rxUnicastOctets = 0;	//rxUniOctets  byte size
-	   wd->commTally.rxMulticastOctets = 0;	//rxMultiOctets  byte size
-	   wd->commTally.DriverDiscardedFrm = 0;// Discard by ValidateFrame
-	   wd->commTally.LessThanDataMinLen = 0;//
-	   wd->commTally.GreaterThanMaxLen = 0;//
-	   wd->commTally.DriverDiscardedFrmCauseByMulticastList = 0;
-	   wd->commTally.DriverDiscardedFrmCauseByFrmCtrl = 0;
-	   wd->commTally.rxNeedFrgFrm = 0;		// need more frg frm
-	   wd->commTally.DriverRxMgtFrmCnt = 0;
-	   wd->commTally.rxBroadcastFrm = 0;	//Receive broadcast frame count
-	   wd->commTally.rxBroadcastOctets = 0;	//Receive broadcast frame byte size
-	   wd->commTally.Hw_TotalRxFrm = 0;//
-	   wd->commTally.Hw_CRC16Cnt = 0;		//rxPLCPCRCErrCnt
-	   wd->commTally.Hw_CRC32Cnt = 0;		//rxCRC32ErrCnt
-	   wd->commTally.Hw_DecrypErr_UNI = 0;//
-	   wd->commTally.Hw_DecrypErr_Mul = 0;//
-	   wd->commTally.Hw_RxFIFOOverrun = 0;//
-	   wd->commTally.Hw_RxTimeOut = 0;
-	   wd->commTally.LossAP = 0;//
-
-	   wd->commTally.Tx_MPDU = 0;
-	   wd->commTally.BA_Fail = 0;
-	   wd->commTally.Hw_Tx_AMPDU = 0;
-	   wd->commTally.Hw_Tx_MPDU = 0;
-
-    wd->commTally.txQosDropCount[0] = 0;
-    wd->commTally.txQosDropCount[1] = 0;
-    wd->commTally.txQosDropCount[2] = 0;
-    wd->commTally.txQosDropCount[3] = 0;
-    wd->commTally.txQosDropCount[4] = 0;
-
-    wd->commTally.Hw_RxMPDU = 0;
-    wd->commTally.Hw_RxDropMPDU = 0;
-    wd->commTally.Hw_RxDelMPDU = 0;
-
-    wd->commTally.Hw_RxPhyMiscError = 0;
-    wd->commTally.Hw_RxPhyXRError = 0;
-    wd->commTally.Hw_RxPhyOFDMError = 0;
-    wd->commTally.Hw_RxPhyCCKError = 0;
-    wd->commTally.Hw_RxPhyHTError = 0;
-    wd->commTally.Hw_RxPhyTotalCount = 0;
-
-#if	(defined(GCCK) && defined(OFDM))
-	   wd->commTally.rx11bDataFrame = 0;
-	   wd->commTally.rxOFDMDataFrame = 0;
+	zmw_get_wlan_dev(dev);
+
+	zmw_declare_for_critical_section();
+
+	zmw_enter_critical_section(dev);
+
+	wd->commTally.txUnicastFrm = 0;		/* txUnicastFrames */
+	wd->commTally.txMulticastFrm = 0;	/* txMulticastFrames */
+	wd->commTally.txUnicastOctets = 0;	/* txUniOctets  byte size */
+	wd->commTally.txMulticastOctets = 0;	/* txMultiOctets  byte size */
+	wd->commTally.txFrmUpperNDIS = 0;
+	wd->commTally.txFrmDrvMgt = 0;
+	wd->commTally.RetryFailCnt = 0;
+	wd->commTally.Hw_TotalTxFrm = 0;	/* Hardware total Tx Frame */
+	wd->commTally.Hw_RetryCnt = 0;		/* txMultipleRetriesFrames */
+	wd->commTally.Hw_UnderrunCnt = 0;
+	wd->commTally.DriverRxFrmCnt = 0;
+	wd->commTally.rxUnicastFrm = 0;		/* rxUnicastFrames */
+	wd->commTally.rxMulticastFrm = 0;	/* rxMulticastFrames */
+	wd->commTally.NotifyNDISRxFrmCnt = 0;
+	wd->commTally.rxUnicastOctets = 0;	/* rxUniOctets  byte size */
+	wd->commTally.rxMulticastOctets = 0;	/* rxMultiOctets  byte size */
+	wd->commTally.DriverDiscardedFrm = 0;	/* Discard by ValidateFrame */
+	wd->commTally.LessThanDataMinLen = 0;
+	wd->commTally.GreaterThanMaxLen = 0;
+	wd->commTally.DriverDiscardedFrmCauseByMulticastList = 0;
+	wd->commTally.DriverDiscardedFrmCauseByFrmCtrl = 0;
+	wd->commTally.rxNeedFrgFrm = 0;		/* need more frg frm */
+	wd->commTally.DriverRxMgtFrmCnt = 0;
+	wd->commTally.rxBroadcastFrm = 0;/* Receive broadcast frame count */
+	wd->commTally.rxBroadcastOctets = 0;/*Receive broadcast framebyte size*/
+	wd->commTally.Hw_TotalRxFrm = 0;
+	wd->commTally.Hw_CRC16Cnt = 0;		/* rxPLCPCRCErrCnt */
+	wd->commTally.Hw_CRC32Cnt = 0;		/* rxCRC32ErrCnt */
+	wd->commTally.Hw_DecrypErr_UNI = 0;
+	wd->commTally.Hw_DecrypErr_Mul = 0;
+	wd->commTally.Hw_RxFIFOOverrun = 0;
+	wd->commTally.Hw_RxTimeOut = 0;
+	wd->commTally.LossAP = 0;
+
+	wd->commTally.Tx_MPDU = 0;
+	wd->commTally.BA_Fail = 0;
+	wd->commTally.Hw_Tx_AMPDU = 0;
+	wd->commTally.Hw_Tx_MPDU = 0;
+
+	wd->commTally.txQosDropCount[0] = 0;
+	wd->commTally.txQosDropCount[1] = 0;
+	wd->commTally.txQosDropCount[2] = 0;
+	wd->commTally.txQosDropCount[3] = 0;
+	wd->commTally.txQosDropCount[4] = 0;
+
+	wd->commTally.Hw_RxMPDU = 0;
+	wd->commTally.Hw_RxDropMPDU = 0;
+	wd->commTally.Hw_RxDelMPDU = 0;
+
+	wd->commTally.Hw_RxPhyMiscError = 0;
+	wd->commTally.Hw_RxPhyXRError = 0;
+	wd->commTally.Hw_RxPhyOFDMError = 0;
+	wd->commTally.Hw_RxPhyCCKError = 0;
+	wd->commTally.Hw_RxPhyHTError = 0;
+	wd->commTally.Hw_RxPhyTotalCount = 0;
+
+#if (defined(GCCK) && defined(OFDM))
+	wd->commTally.rx11bDataFrame = 0;
+	wd->commTally.rxOFDMDataFrame = 0;
 #endif
 
-    zmw_leave_critical_section(dev);
+	zmw_leave_critical_section(dev);
 }
 
 /* FB50 in OS XP, RD private test code */
-void zfiWlanQueryTally(zdev_t* dev, struct zsCommTally *tally)
+void zfiWlanQueryTally(zdev_t *dev, struct zsCommTally *tally)
 {
-    zmw_get_wlan_dev(dev);
+	zmw_get_wlan_dev(dev);
 
-    zmw_declare_for_critical_section();
+	zmw_declare_for_critical_section();
 
-    zmw_enter_critical_section(dev);
-    zfMemoryCopy((u8_t*)tally, (u8_t*)&wd->commTally, sizeof(struct zsCommTally));
-    zmw_leave_critical_section(dev);
+	zmw_enter_critical_section(dev);
+	zfMemoryCopy((u8_t *)tally, (u8_t *)&wd->commTally,
+						sizeof(struct zsCommTally));
+	zmw_leave_critical_section(dev);
 }
-void zfiWlanQueryTrafTally(zdev_t* dev, struct zsTrafTally *tally)
+
+void zfiWlanQueryTrafTally(zdev_t *dev, struct zsTrafTally *tally)
 {
-    zmw_get_wlan_dev(dev);
+	zmw_get_wlan_dev(dev);
 
-    zmw_declare_for_critical_section();
+	zmw_declare_for_critical_section();
 
-    zmw_enter_critical_section(dev);
-    zfMemoryCopy((u8_t*)tally, (u8_t*)&wd->trafTally, sizeof(struct zsTrafTally));
-    zmw_leave_critical_section(dev);
+	zmw_enter_critical_section(dev);
+	zfMemoryCopy((u8_t *)tally, (u8_t *)&wd->trafTally,
+						sizeof(struct zsTrafTally));
+	zmw_leave_critical_section(dev);
 }
 
-void zfiWlanQueryMonHalRxInfo(zdev_t* dev, struct zsMonHalRxInfo *monHalRxInfo)
+void zfiWlanQueryMonHalRxInfo(zdev_t *dev, struct zsMonHalRxInfo *monHalRxInfo)
 {
-    zfHpQueryMonHalRxInfo(dev, (u8_t *)monHalRxInfo);
+	zfHpQueryMonHalRxInfo(dev, (u8_t *)monHalRxInfo);
 }
 
 /* parse the modeMDKEnable to DrvCore */
-void zfiDKEnable(zdev_t* dev, u32_t enable)
+void zfiDKEnable(zdev_t *dev, u32_t enable)
 {
-    zmw_get_wlan_dev(dev);
+	zmw_get_wlan_dev(dev);
 
-    wd->modeMDKEnable = enable;
-    zm_debug_msg1("modeMDKEnable = ", wd->modeMDKEnable);
+	wd->modeMDKEnable = enable;
+	zm_debug_msg1("modeMDKEnable = ", wd->modeMDKEnable);
 }
 
 /* airoPeek */
-u32_t zfiWlanQueryPacketTypePromiscuous(zdev_t* dev)
+u32_t zfiWlanQueryPacketTypePromiscuous(zdev_t *dev)
 {
-    zmw_get_wlan_dev(dev);
+	zmw_get_wlan_dev(dev);
 
-    return wd->swSniffer;
+	return wd->swSniffer;
 }
 
 /* airoPeek */
-void zfiWlanSetPacketTypePromiscuous(zdev_t* dev, u32_t setValue)
+void zfiWlanSetPacketTypePromiscuous(zdev_t *dev, u32_t setValue)
 {
-    zmw_get_wlan_dev(dev);
-
-	   wd->swSniffer = setValue;
-	   zm_msg1_mm(ZM_LV_0, "wd->swSniffer ", wd->swSniffer);
-	   if (setValue)
-	   {
-	       	/* write register for sniffer mode */
-            zfHpSetSnifferMode(dev, 1);
-            zm_msg0_mm(ZM_LV_1, "enalbe sniffer mode");
-	   }
-	   else
-	   {
-            zfHpSetSnifferMode(dev, 0);
-            zm_msg0_mm(ZM_LV_0, "disalbe sniffer mode");
-	   }
+	zmw_get_wlan_dev(dev);
+
+	wd->swSniffer = setValue;
+	zm_msg1_mm(ZM_LV_0, "wd->swSniffer ", wd->swSniffer);
+	if (setValue) {
+		/* write register for sniffer mode */
+		zfHpSetSnifferMode(dev, 1);
+		zm_msg0_mm(ZM_LV_1, "enalbe sniffer mode");
+	} else {
+		zfHpSetSnifferMode(dev, 0);
+		zm_msg0_mm(ZM_LV_0, "disalbe sniffer mode");
+	}
 }
 
-void zfiWlanSetXLinkMode(zdev_t* dev, u32_t setValue)
+void zfiWlanSetXLinkMode(zdev_t *dev, u32_t setValue)
 {
-    zmw_get_wlan_dev(dev);
-
-    wd->XLinkMode = setValue;
-    if (setValue)
-    {
-        /* write register for sniffer mode */
-        zfHpSetSnifferMode(dev, 1);
-    }
-    else
-    {
-        zfHpSetSnifferMode(dev, 0);
-    }
+	zmw_get_wlan_dev(dev);
+
+	wd->XLinkMode = setValue;
+	if (setValue) {
+		/* write register for sniffer mode */
+		zfHpSetSnifferMode(dev, 1);
+	} else
+		zfHpSetSnifferMode(dev, 0);
 }
 
-extern void zfStaChannelManagement(zdev_t* dev, u8_t scan);
-void zfiSetChannelManagement(zdev_t* dev, u32_t setting)
+extern void zfStaChannelManagement(zdev_t *dev, u8_t scan);
+
+void zfiSetChannelManagement(zdev_t *dev, u32_t setting)
 {
-    zmw_get_wlan_dev(dev);
-
-    switch (setting)
-    {
-        case 1:
-            wd->sta.EnableHT = 1;
-            wd->BandWidth40 = 1;
-            wd->ExtOffset   = 1;
-            break;
-        case 3:
-            wd->sta.EnableHT = 1;
-            wd->BandWidth40 = 1;
-            wd->ExtOffset   = 3;
-            break;
-        case 0:
-            wd->sta.EnableHT = 1;
-            wd->BandWidth40 = 0;
-            wd->ExtOffset   = 0;
-            break;
-        default:
-            wd->BandWidth40 = 0;
-            wd->ExtOffset   = 0;
-            break;
-
-    }
-    zfCoreSetFrequencyEx(dev, wd->frequency, wd->BandWidth40,
-                    wd->ExtOffset, NULL);
+	zmw_get_wlan_dev(dev);
+
+	switch (setting) {
+	case 1:
+		wd->sta.EnableHT = 1;
+		wd->BandWidth40 = 1;
+		wd->ExtOffset   = 1;
+		break;
+	case 3:
+		wd->sta.EnableHT = 1;
+		wd->BandWidth40 = 1;
+		wd->ExtOffset   = 3;
+		break;
+	case 0:
+		wd->sta.EnableHT = 1;
+		wd->BandWidth40 = 0;
+		wd->ExtOffset   = 0;
+		break;
+	default:
+		wd->BandWidth40 = 0;
+		wd->ExtOffset   = 0;
+		break;
+	}
+
+	zfCoreSetFrequencyEx(dev, wd->frequency, wd->BandWidth40,
+							wd->ExtOffset, NULL);
 }
 
-void zfiSetRifs(zdev_t* dev, u16_t setting)
+void zfiSetRifs(zdev_t *dev, u16_t setting)
 {
-    zmw_get_wlan_dev(dev);
-
-    wd->sta.ie.HtInfo.ChannelInfo |= ExtHtCap_RIFSMode;
-    wd->sta.EnableHT = 1;
-    switch (setting)
-    {
-        case 0:
-            wd->sta.HT2040 = 0;
-//            zfHpSetRifs(dev, 1, 0, (wd->sta.currentFrequency < 3000)? 1:0);
-            break;
-        case 1:
-            wd->sta.HT2040 = 1;
-//            zfHpSetRifs(dev, 1, 1, (wd->sta.currentFrequency < 3000)? 1:0);
-            break;
-        default:
-            wd->sta.HT2040 = 0;
-//            zfHpSetRifs(dev, 1, 0, (wd->sta.currentFrequency < 3000)? 1:0);
-            break;
-    }
+	zmw_get_wlan_dev(dev);
+
+	wd->sta.ie.HtInfo.ChannelInfo |= ExtHtCap_RIFSMode;
+	wd->sta.EnableHT = 1;
+
+	switch (setting) {
+	case 0:
+		wd->sta.HT2040 = 0;
+		/* zfHpSetRifs(dev, 1, 0,
+		*  (wd->sta.currentFrequency < 3000)? 1:0);
+		*/
+		break;
+	case 1:
+		wd->sta.HT2040 = 1;
+		/* zfHpSetRifs(dev, 1, 1,
+		*  (wd->sta.currentFrequency < 3000)? 1:0);
+		*/
+		break;
+	default:
+		wd->sta.HT2040 = 0;
+		/* zfHpSetRifs(dev, 1, 0,
+		*  (wd->sta.currentFrequency < 3000)? 1:0);
+		*/
+		break;
+	}
 }
 
-void zfiCheckRifs(zdev_t* dev)
+void zfiCheckRifs(zdev_t *dev)
 {
-    zmw_get_wlan_dev(dev);
+	zmw_get_wlan_dev(dev);
 
-    if(wd->sta.ie.HtInfo.ChannelInfo & ExtHtCap_RIFSMode)
-    {
-//        zfHpSetRifs(dev, wd->sta.EnableHT, wd->sta.HT2040, (wd->sta.currentFrequency < 3000)? 1:0);
-    }
+	if (wd->sta.ie.HtInfo.ChannelInfo & ExtHtCap_RIFSMode)
+		;
+		/* zfHpSetRifs(dev, wd->sta.EnableHT, wd->sta.HT2040,
+		*  (wd->sta.currentFrequency < 3000)? 1:0);
+		*/
 }
 
-void zfiSetReorder(zdev_t* dev, u16_t value)
+void zfiSetReorder(zdev_t *dev, u16_t value)
 {
-    zmw_get_wlan_dev(dev);
+	zmw_get_wlan_dev(dev);
 
-    wd->reorder = value;
+	wd->reorder = value;
 }
 
-void zfiSetSeqDebug(zdev_t* dev, u16_t value)
+void zfiSetSeqDebug(zdev_t *dev, u16_t value)
 {
-    zmw_get_wlan_dev(dev);
+	zmw_get_wlan_dev(dev);
 
-    wd->seq_debug = value;
+	wd->seq_debug = value;
 }
diff --git a/drivers/staging/otus/80211core/coid.c b/drivers/staging/otus/80211core/coid.c
index 88f8d3491a8..0524e1f36f0 100644
--- a/drivers/staging/otus/80211core/coid.c
+++ b/drivers/staging/otus/80211core/coid.c
@@ -2013,7 +2013,7 @@ u16_t zfiConfigWdsPort(zdev_t* dev, u8_t wdsPortId, u16_t flag, u16_t* wdsAddr,
 
     zmw_get_wlan_dev(dev);
 
-    if (wdsPortId > ZM_MAX_WDS_SUPPORT)
+    if (wdsPortId >= ZM_MAX_WDS_SUPPORT)
     {
         return ZM_ERR_WDS_PORT_ID;
     }
diff --git a/drivers/staging/p9auth/p9auth.c b/drivers/staging/p9auth/p9auth.c
index 3cac89b26fa..9111dcba37a 100644
--- a/drivers/staging/p9auth/p9auth.c
+++ b/drivers/staging/p9auth/p9auth.c
@@ -180,8 +180,12 @@ static ssize_t cap_write(struct file *filp, const char __user *buf,
 	if (down_interruptible(&dev->sem))
 		return -ERESTARTSYS;
 
+	user_buf_running = NULL;
+	hash_str = NULL;
 	node_ptr = kmalloc(sizeof(struct cap_node), GFP_KERNEL);
 	user_buf = kzalloc(count, GFP_KERNEL);
+	if (!node_ptr || !user_buf)
+		goto out;
 
 	if (copy_from_user(user_buf, buf, count)) {
 		retval = -EFAULT;
@@ -193,11 +197,21 @@ static ssize_t cap_write(struct file *filp, const char __user *buf,
 	 * hashed capability supplied by the user to the list of hashes
 	 */
 	if (0 == iminor(filp->f_dentry->d_inode)) {
+		if (count > CAP_NODE_SIZE) {
+			retval = -EINVAL;
+			goto out;
+		}
 		printk(KERN_INFO "Capability being written to /dev/caphash : \n");
 		hexdump(user_buf, count);
 		memcpy(node_ptr->data, user_buf, count);
 		list_add(&(node_ptr->list), &(dev->head->list));
+		node_ptr = NULL;
 	} else {
+		if (!cap_devices[0].head ||
+				list_empty(&(cap_devices[0].head->list))) {
+			retval = -EINVAL;
+			goto out;
+		}
 		/*
 		 * break the supplied string into tokens with @ as the
 		 * delimiter If the string is "user1@user2@randomstring" we
@@ -208,6 +222,10 @@ static ssize_t cap_write(struct file *filp, const char __user *buf,
 		source_user = strsep(&user_buf_running, "@");
 		target_user = strsep(&user_buf_running, "@");
 		rand_str = strsep(&user_buf_running, "@");
+		if (!source_user || !target_user || !rand_str) {
+			retval = -EINVAL;
+			goto out;
+		}
 
 		/* hash the string user1@user2 with rand_str as the key */
 		len = strlen(source_user) + strlen(target_user) + 1;
@@ -224,7 +242,7 @@ static ssize_t cap_write(struct file *filp, const char __user *buf,
 			retval = -EFAULT;
 			goto out;
 		}
-		memcpy(node_ptr->data, result, CAP_NODE_SIZE);
+		memcpy(node_ptr->data, result, CAP_NODE_SIZE);  /* why? */
 		/* Change the process's uid if the hash is present in the
 		 * list of hashes
 		 */
@@ -299,6 +317,10 @@ static ssize_t cap_write(struct file *filp, const char __user *buf,
 		dev->size = *f_pos;
 
 out:
+	kfree(node_ptr);
+	kfree(user_buf);
+	kfree(user_buf_running);
+	kfree(hash_str);
 	up(&dev->sem);
 	return retval;
 }
diff --git a/drivers/staging/pata_rdc/Kconfig b/drivers/staging/pata_rdc/Kconfig
new file mode 100644
index 00000000000..7a406b02305
--- /dev/null
+++ b/drivers/staging/pata_rdc/Kconfig
@@ -0,0 +1,6 @@
+config RDC_17F3101X
+	tristate "RDC_17F3101X IDE support"
+	depends on PCI && ATA && ATA_SFF
+	---help---
+	  This is an experimental driver for RDC_17F31011 and
+	  RDC_17F31012 IDE driver.
diff --git a/drivers/staging/pata_rdc/Makefile b/drivers/staging/pata_rdc/Makefile
new file mode 100644
index 00000000000..f952c16f4b2
--- /dev/null
+++ b/drivers/staging/pata_rdc/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_RDC_17F3101X)	+= pata_rdc.o
+
diff --git a/drivers/staging/pata_rdc/pata_rdc.c b/drivers/staging/pata_rdc/pata_rdc.c
new file mode 100644
index 00000000000..6252745250e
--- /dev/null
+++ b/drivers/staging/pata_rdc/pata_rdc.c
@@ -0,0 +1,955 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <linux/pci.h>
+#include <linux/device.h>
+
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#include "pata_rdc.h"
+
+static const struct pci_device_id rdc_pata_id_table[] = {
+	{ PCI_DEVICE(0x17F3, 0x1011), RDC_17F31011},
+	{ PCI_DEVICE(0x17F3, 0x1012), RDC_17F31012},
+	{ }	/* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, rdc_pata_id_table);
+
+/* see ATA Host Adapters Standards. */
+static struct pci_bits ATA_Decode_Enable_Bits[] = {
+	{ 0x41U, 1U, 0x80UL, 0x80UL },	/* port (Channel) 0 */
+	{ 0x43U, 1U, 0x80UL, 0x80UL },	/* port (Channel) 1 */
+};
+
+static uint PCIDeviceIO_ReadPCIConfiguration(struct pci_dev *pdev, uint Offset, uint Length, void *pBuffer)
+{
+	uint funcresult;
+	unchar *pchar;
+	uint i;
+
+	funcresult = TRUE;
+
+	pchar = pBuffer;
+
+	for (i = 0; i < Length; i++) {
+		pci_read_config_byte(pdev, Offset, pchar);
+		Offset++;
+		pchar++;
+	}
+
+	funcresult = TRUE;
+
+	goto funcexit;
+funcexit:
+
+	return funcresult;
+}
+
+static uint PCIDeviceIO_WritePCIConfiguration(struct pci_dev *pdev, uint Offset, uint Length, void *pBuffer)
+{
+	uint funcresult;
+	unchar *pchar;
+	uint i;
+
+	funcresult = TRUE;
+
+	pchar = pBuffer;
+
+	for (i = 0; i < Length; i++) {
+		pci_write_config_byte(pdev, Offset, *pchar);
+		Offset++;
+		pchar++;
+	}
+
+	funcresult = TRUE;
+
+	goto funcexit;
+funcexit:
+
+	return funcresult;
+}
+
+static uint ATAHostAdapter_SetPrimaryPIO(struct pci_dev *pdev, uint DeviceID,
+					 uint PIOTimingMode, uint DMAEnable,
+					 uint PrefetchPostingEnable)
+{
+	uint funcresult;
+	uint result;
+	uint ATATimingRegister;
+	uint Device1TimingRegister;
+
+	funcresult = TRUE;
+
+	ATATimingRegister = 0;
+	Device1TimingRegister = 0;
+
+	result = PCIDeviceIO_ReadPCIConfiguration(pdev,
+						 ATAConfiguration_ID_PrimaryTiming + ATAConfiguration_PCIOffset,
+						 ATAConfiguration_ID_PrimaryTiming_Size,
+						 &ATATimingRegister);
+	if (result == FALSE) {
+		funcresult = FALSE;
+		goto funcexit;
+	}
+
+	result = PCIDeviceIO_ReadPCIConfiguration(pdev,
+						  ATAConfiguration_ID_Device1Timing + ATAConfiguration_PCIOffset,
+						  ATAConfiguration_ID_Device1Timing_Size,
+						  &Device1TimingRegister);
+	if (result == FALSE) {
+		funcresult = FALSE;
+		goto funcexit;
+	}
+
+	ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1TimingRegisterEnable;
+
+	switch (DeviceID) {
+	case 0:
+		/* mask clear */
+		ATATimingRegister &= ~(ATAConfiguration_PrimaryTiming_Device0FastTimingEnable |
+				      ATAConfiguration_PrimaryTiming_Device0IORDYSampleModeEnable |
+				      ATAConfiguration_PrimaryTiming_Device0PrefetchandPostingEnable |
+				      ATAConfiguration_PrimaryTiming_Device0DMATimingEnable |
+				      ATAConfiguration_PrimaryTiming_Device0RecoveryMode |
+				      ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode);
+
+		if (PIOTimingMode > PIO0)
+			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0FastTimingEnable;
+
+		if (PIOTimingMode >= PIO3)
+			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0IORDYSampleModeEnable;
+
+		if (PIOTimingMode >= PIO2 && PrefetchPostingEnable == TRUE)
+			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0PrefetchandPostingEnable;
+
+		if (DMAEnable == TRUE && PIOTimingMode >= PIO2)
+			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0DMATimingEnable;
+
+		if (PIOTimingMode <= PIO2)
+			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0RecoveryMode_0;
+		else if (PIOTimingMode == PIO3)
+			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0RecoveryMode_1;
+		else if (PIOTimingMode == PIO4)
+			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0RecoveryMode_3;
+
+		if (PIOTimingMode <= PIO1)
+			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode_0;
+		else if (PIOTimingMode == PIO2)
+			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode_1;
+		else if (PIOTimingMode <= PIO4)
+			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode_2;
+		break;
+	case 1:
+		ATATimingRegister &= ~(ATAConfiguration_PrimaryTiming_Device1FastTimingEnable |
+				       ATAConfiguration_PrimaryTiming_Device1IORDYSampleModeEnable |
+				       ATAConfiguration_PrimaryTiming_Device1PrefetchandPostingEnable |
+				       ATAConfiguration_PrimaryTiming_Device1DMATimingEnable);
+
+		if (PIOTimingMode > PIO0)
+			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1FastTimingEnable;
+
+		if (PIOTimingMode >= PIO3)
+			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1IORDYSampleModeEnable;
+
+		if (PIOTimingMode >= PIO2 && PrefetchPostingEnable == TRUE)
+			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1PrefetchandPostingEnable;
+
+		if (DMAEnable == TRUE && PIOTimingMode >= PIO2)
+			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1DMATimingEnable;
+
+		Device1TimingRegister &= ~(ATAConfiguration_Device1Timing_PrimaryRecoveryMode |
+					   ATAConfiguration_Device1Timing_PrimaryIORDYSampleMode);
+
+		if (PIOTimingMode <= PIO2)
+			Device1TimingRegister |= ATAConfiguration_Device1Timing_PrimaryRecoveryMode_0;
+		else if (PIOTimingMode == PIO3)
+			Device1TimingRegister |= ATAConfiguration_Device1Timing_PrimaryRecoveryMode_1;
+		else if (PIOTimingMode == PIO4)
+			Device1TimingRegister |= ATAConfiguration_Device1Timing_PrimaryRecoveryMode_3;
+
+		if (PIOTimingMode <= PIO1)
+			Device1TimingRegister |= ATAConfiguration_Device1Timing_PrimaryIORDYSampleMode_0;
+		else if (PIOTimingMode == PIO2)
+			Device1TimingRegister |= ATAConfiguration_Device1Timing_PrimaryIORDYSampleMode_1;
+		else if (PIOTimingMode <= PIO4)
+			Device1TimingRegister |= ATAConfiguration_Device1Timing_PrimaryIORDYSampleMode_2;
+		break;
+	default:
+		funcresult = FALSE;
+		goto funcexit;
+		break;
+	}
+
+	result = PCIDeviceIO_WritePCIConfiguration(pdev,
+						   ATAConfiguration_ID_PrimaryTiming + ATAConfiguration_PCIOffset,
+						   ATAConfiguration_ID_PrimaryTiming_Size,
+						   &ATATimingRegister);
+	if (result == FALSE) {
+		funcresult = FALSE;
+		goto funcexit;
+	}
+
+	result = PCIDeviceIO_WritePCIConfiguration(pdev,
+						   ATAConfiguration_ID_Device1Timing + ATAConfiguration_PCIOffset,
+						   ATAConfiguration_ID_Device1Timing_Size,
+						   &Device1TimingRegister);
+	if (result == FALSE) {
+		funcresult = FALSE;
+		goto funcexit;
+	}
+
+	goto funcexit;
+funcexit:
+
+	return funcresult;
+}
+
+static uint ATAHostAdapter_SetSecondaryPIO(struct pci_dev *pdev, uint DeviceID,
+					   uint PIOTimingMode, uint DMAEnable,
+					   uint PrefetchPostingEnable)
+{
+	uint funcresult;
+	uint result;
+	uint ATATimingRegister;
+	uint Device1TimingRegister;
+
+	funcresult = TRUE;
+
+	ATATimingRegister = 0;
+	Device1TimingRegister = 0;
+
+	result = PCIDeviceIO_ReadPCIConfiguration(pdev,
+						  ATAConfiguration_ID_SecondaryTiming + ATAConfiguration_PCIOffset,
+						  ATAConfiguration_ID_SecondaryTiming_Size,
+						  &ATATimingRegister);
+	if (result == FALSE) {
+		funcresult = FALSE;
+		goto funcexit;
+	}
+
+	result = PCIDeviceIO_ReadPCIConfiguration(pdev,
+						  ATAConfiguration_ID_Device1Timing + ATAConfiguration_PCIOffset,
+						  ATAConfiguration_ID_Device1Timing_Size,
+						  &Device1TimingRegister);
+	if (result == FALSE) {
+		funcresult = FALSE;
+		goto funcexit;
+	}
+
+	ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1TimingRegisterEnable;
+
+	switch (DeviceID) {
+	case 0:
+		/* mask clear */
+		ATATimingRegister &= ~(ATAConfiguration_PrimaryTiming_Device0FastTimingEnable |
+				       ATAConfiguration_PrimaryTiming_Device0IORDYSampleModeEnable |
+				       ATAConfiguration_PrimaryTiming_Device0PrefetchandPostingEnable |
+				       ATAConfiguration_PrimaryTiming_Device0DMATimingEnable |
+				       ATAConfiguration_PrimaryTiming_Device0RecoveryMode |
+				       ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode);
+
+		if (PIOTimingMode > PIO0)
+			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0FastTimingEnable;
+
+		if (PIOTimingMode >= PIO3)
+			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0IORDYSampleModeEnable;
+
+		if (PIOTimingMode >= PIO2 && PrefetchPostingEnable == TRUE)
+			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0PrefetchandPostingEnable;
+
+		if (DMAEnable == TRUE && PIOTimingMode >= PIO2)
+			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0DMATimingEnable;
+
+		if (PIOTimingMode <= PIO2)
+			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0RecoveryMode_0;
+		else if (PIOTimingMode == PIO3)
+			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0RecoveryMode_1;
+		else if (PIOTimingMode == PIO4)
+			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0RecoveryMode_3;
+
+		if (PIOTimingMode <= PIO1)
+			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode_0;
+		else if (PIOTimingMode == PIO2)
+			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode_1;
+		else if (PIOTimingMode <= PIO4)
+			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode_2;
+		break;
+	case 1:
+		ATATimingRegister &= ~(ATAConfiguration_PrimaryTiming_Device1FastTimingEnable |
+				       ATAConfiguration_PrimaryTiming_Device1IORDYSampleModeEnable |
+				       ATAConfiguration_PrimaryTiming_Device1PrefetchandPostingEnable |
+				       ATAConfiguration_PrimaryTiming_Device1DMATimingEnable);
+
+		if (PIOTimingMode > PIO0)
+			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1FastTimingEnable;
+
+		if (PIOTimingMode >= PIO3)
+			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1IORDYSampleModeEnable;
+
+		if (PIOTimingMode >= PIO2 && PrefetchPostingEnable == TRUE)
+			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1PrefetchandPostingEnable;
+
+		if (DMAEnable == TRUE && PIOTimingMode >= PIO2)
+			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1DMATimingEnable;
+
+		Device1TimingRegister &= ~(ATAConfiguration_Device1Timing_SecondaryRecoveryMode |
+					   ATAConfiguration_Device1Timing_SecondaryIORDYSampleMode);
+
+		if (PIOTimingMode <= PIO2)
+			Device1TimingRegister |= ATAConfiguration_Device1Timing_SecondaryRecoveryMode_0;
+		else if (PIOTimingMode == PIO3)
+			Device1TimingRegister |= ATAConfiguration_Device1Timing_SecondaryRecoveryMode_1;
+		else if (PIOTimingMode == PIO4)
+			Device1TimingRegister |= ATAConfiguration_Device1Timing_SecondaryRecoveryMode_3;
+
+		if (PIOTimingMode <= PIO1)
+			Device1TimingRegister |= ATAConfiguration_Device1Timing_SecondaryIORDYSampleMode_0;
+		else if (PIOTimingMode == PIO2)
+			Device1TimingRegister |= ATAConfiguration_Device1Timing_SecondaryIORDYSampleMode_1;
+		else if (PIOTimingMode <= PIO4)
+			Device1TimingRegister |= ATAConfiguration_Device1Timing_SecondaryIORDYSampleMode_2;
+		break;
+	default:
+		funcresult = FALSE;
+		goto funcexit;
+		break;
+	}
+
+	result = PCIDeviceIO_WritePCIConfiguration(pdev,
+						   ATAConfiguration_ID_SecondaryTiming + ATAConfiguration_PCIOffset,
+						   ATAConfiguration_ID_SecondaryTiming_Size,
+						   &ATATimingRegister);
+	if (result == FALSE) {
+		funcresult = FALSE;
+		goto funcexit;
+	}
+
+	result = PCIDeviceIO_WritePCIConfiguration(pdev,
+						   ATAConfiguration_ID_Device1Timing + ATAConfiguration_PCIOffset,
+						   ATAConfiguration_ID_Device1Timing_Size,
+						   &Device1TimingRegister);
+	if (result == FALSE) {
+		funcresult = FALSE;
+		goto funcexit;
+	}
+
+	goto funcexit;
+funcexit:
+	return funcresult;
+}
+
+static uint ATAHostAdapter_SetPrimaryUDMA(struct pci_dev *pdev, uint DeviceID,
+					  uint UDMAEnable, uint UDMATimingMode)
+{
+	uint funcresult;
+	uint result;
+	uint UDMAControlRegister;
+	uint UDMATimingRegister;
+	ulong IDEIOConfigurationRegister;
+
+	funcresult = TRUE;
+	UDMAControlRegister = 0;
+	UDMATimingRegister = 0;
+	IDEIOConfigurationRegister = 0;
+
+	result = PCIDeviceIO_ReadPCIConfiguration(pdev,
+						  ATAConfiguration_ID_UDMAControl + ATAConfiguration_PCIOffset,
+						  ATAConfiguration_ID_UDMAControl_Size,
+						  &UDMAControlRegister);
+	if (result == FALSE) {
+		funcresult = FALSE;
+		goto funcexit;
+	}
+
+	result = PCIDeviceIO_ReadPCIConfiguration(pdev,
+						  ATAConfiguration_ID_UDMATiming + ATAConfiguration_PCIOffset,
+						  ATAConfiguration_ID_UDMATiming_Size,
+						  &UDMATimingRegister);
+	if (result == FALSE) {
+		funcresult = FALSE;
+		goto funcexit;
+	}
+
+	result = PCIDeviceIO_ReadPCIConfiguration(pdev,
+						  ATAConfiguration_ID_IDEIOConfiguration + ATAConfiguration_PCIOffset,
+						  ATAConfiguration_ID_IDEIOConfiguration_Size,
+						  &IDEIOConfigurationRegister);
+	if (result == FALSE) {
+		funcresult = FALSE;
+		goto funcexit;
+	}
+
+	/*Rom Code will determine the device cable type and ATA 100.*/
+	/*IDEIOConfigurationRegister |= ATAConfiguration_IDEIOConfiguration_DeviceCable80Report;*/
+	/*IDEIOConfigurationRegister |= ATAConfiguration_IDEIOConfiguration_ATA100IsSupported;*/
+
+	switch (DeviceID) {
+	case 0:
+		UDMAControlRegister &= ~(ATAConfiguration_UDMAControl_PrimaryDevice0UDMAModeEnable);
+		if (UDMAEnable == TRUE)
+			UDMAControlRegister |= ATAConfiguration_UDMAControl_PrimaryDevice0UDMAModeEnable;
+
+		IDEIOConfigurationRegister &= ~(ATAConfiguration_IDEIOConfiguration_PrimaryDevice066MhzEnable |
+						ATAConfiguration_IDEIOConfiguration_PrimaryDevice0100MhzEnable);
+
+		if (UDMATimingMode >= UDMA5)
+			IDEIOConfigurationRegister |= ATAConfiguration_IDEIOConfiguration_PrimaryDevice0100MhzEnable;
+		else if (UDMATimingMode >= UDMA3)
+			IDEIOConfigurationRegister |= ATAConfiguration_IDEIOConfiguration_PrimaryDevice066MhzEnable;
+
+		/* if 80 cable report */
+		UDMATimingRegister &= ~(ATAConfiguration_UDMATiming_PrimaryDevice0CycleTime);
+
+		if (UDMATimingMode == UDMA0) {
+			UDMATimingRegister |= ATAConfiguration_UDMATiming_PrimaryDevice0CycleTime_0;
+		} else if (UDMATimingMode == UDMA1 ||
+			   UDMATimingMode == UDMA3 ||
+			   UDMATimingMode == UDMA5) {
+			UDMATimingRegister |= ATAConfiguration_UDMATiming_PrimaryDevice0CycleTime_1;
+		} else if (UDMATimingMode == UDMA2 ||
+			   UDMATimingMode == UDMA4) {
+			UDMATimingRegister |= ATAConfiguration_UDMATiming_PrimaryDevice0CycleTime_2;
+		}
+		break;
+	case 1:
+		UDMAControlRegister &= ~(ATAConfiguration_UDMAControl_PrimaryDevice1UDMAModeEnable);
+		if (UDMAEnable == TRUE)
+			UDMAControlRegister |= ATAConfiguration_UDMAControl_PrimaryDevice1UDMAModeEnable;
+
+		IDEIOConfigurationRegister &= ~(ATAConfiguration_IDEIOConfiguration_PrimaryDevice166MhzEnable |
+						ATAConfiguration_IDEIOConfiguration_PrimaryDevice1100MhzEnable);
+
+		if (UDMATimingMode >= UDMA5)
+			IDEIOConfigurationRegister |= ATAConfiguration_IDEIOConfiguration_PrimaryDevice1100MhzEnable;
+		else if (UDMATimingMode >= UDMA3)
+			IDEIOConfigurationRegister |= ATAConfiguration_IDEIOConfiguration_PrimaryDevice166MhzEnable;
+
+		/* if 80 cable report */
+		UDMATimingRegister &= ~(ATAConfiguration_UDMATiming_PrimaryDevice1CycleTime);
+
+		if (UDMATimingMode == UDMA0) {
+			UDMATimingRegister |= ATAConfiguration_UDMATiming_PrimaryDevice1CycleTime_0;
+		} else if (UDMATimingMode == UDMA1 ||
+			   UDMATimingMode == UDMA3 ||
+			   UDMATimingMode == UDMA5) {
+			UDMATimingRegister |= ATAConfiguration_UDMATiming_PrimaryDevice1CycleTime_1;
+		} else if (UDMATimingMode == UDMA2 ||
+			   UDMATimingMode == UDMA4) {
+			UDMATimingRegister |= ATAConfiguration_UDMATiming_PrimaryDevice1CycleTime_2;
+		}
+		break;
+	default:
+		funcresult = FALSE;
+		goto funcexit;
+		break;
+	}
+
+	result = PCIDeviceIO_WritePCIConfiguration(pdev,
+						   ATAConfiguration_ID_UDMAControl + ATAConfiguration_PCIOffset,
+						   ATAConfiguration_ID_UDMAControl_Size,
+						   &UDMAControlRegister);
+	if (result == FALSE) {
+		funcresult = FALSE;
+		goto funcexit;
+	}
+
+	result = PCIDeviceIO_WritePCIConfiguration(pdev,
+						   ATAConfiguration_ID_UDMATiming + ATAConfiguration_PCIOffset,
+						   ATAConfiguration_ID_UDMATiming_Size,
+						   &UDMATimingRegister);
+	if (result == FALSE) {
+		funcresult = FALSE;
+		goto funcexit;
+	}
+
+	result = PCIDeviceIO_WritePCIConfiguration(pdev,
+						   ATAConfiguration_ID_IDEIOConfiguration + ATAConfiguration_PCIOffset,
+						   ATAConfiguration_ID_IDEIOConfiguration_Size,
+						   &IDEIOConfigurationRegister);
+	if (result == FALSE) {
+		funcresult = FALSE;
+		goto funcexit;
+	}
+
+	goto funcexit;
+funcexit:
+	return funcresult;
+}
+
+static uint ATAHostAdapter_SetSecondaryUDMA(struct pci_dev *pdev, uint DeviceID,
+					    uint UDMAEnable, uint UDMATimingMode)
+{
+	uint funcresult;
+	uint result;
+	uint UDMAControlRegister;
+	uint UDMATimingRegister;
+	ulong IDEIOConfigurationRegister;
+
+	funcresult = TRUE;
+
+	UDMAControlRegister = 0;
+	UDMATimingRegister = 0;
+	IDEIOConfigurationRegister = 0;
+
+	result = PCIDeviceIO_ReadPCIConfiguration(pdev,
+						  ATAConfiguration_ID_UDMAControl + ATAConfiguration_PCIOffset,
+						  ATAConfiguration_ID_UDMAControl_Size,
+						  &UDMAControlRegister);
+	if (result == FALSE) {
+		funcresult = FALSE;
+		goto funcexit;
+	}
+
+	result = PCIDeviceIO_ReadPCIConfiguration(pdev,
+						  ATAConfiguration_ID_UDMATiming + ATAConfiguration_PCIOffset,
+						  ATAConfiguration_ID_UDMATiming_Size,
+						  &UDMATimingRegister);
+	if (result == FALSE) {
+		funcresult = FALSE;
+		goto funcexit;
+	}
+
+	result = PCIDeviceIO_ReadPCIConfiguration(pdev,
+						  ATAConfiguration_ID_IDEIOConfiguration + ATAConfiguration_PCIOffset,
+						  ATAConfiguration_ID_IDEIOConfiguration_Size,
+						  &IDEIOConfigurationRegister);
+	if (result == FALSE) {
+		funcresult = FALSE;
+		goto funcexit;
+	}
+
+	/* Rom Code will determine the device cable type and ATA 100. */
+	/* IDEIOConfigurationRegister |= ATAConfiguration_IDEIOConfiguration_DeviceCable80Report; */
+	/* IDEIOConfigurationRegister |= ATAConfiguration_IDEIOConfiguration_ATA100IsSupported; */
+
+	switch (DeviceID) {
+	case 0:
+		UDMAControlRegister &= ~(ATAConfiguration_UDMAControl_SecondaryDevice0UDMAModeEnable);
+		if (UDMAEnable == TRUE)
+			UDMAControlRegister |= ATAConfiguration_UDMAControl_SecondaryDevice0UDMAModeEnable;
+
+		IDEIOConfigurationRegister &= ~(ATAConfiguration_IDEIOConfiguration_SecondaryDevice066MhzEnable |
+						ATAConfiguration_IDEIOConfiguration_SecondaryDevice0100MhzEnable);
+
+		if (UDMATimingMode >= UDMA5)
+			IDEIOConfigurationRegister |= ATAConfiguration_IDEIOConfiguration_SecondaryDevice0100MhzEnable;
+		else if (UDMATimingMode >= UDMA3)
+			IDEIOConfigurationRegister |= ATAConfiguration_IDEIOConfiguration_SecondaryDevice066MhzEnable;
+
+		/* if 80 cable report */
+		UDMATimingRegister &= ~(ATAConfiguration_UDMATiming_SecondaryDevice0CycleTime);
+
+		if (UDMATimingMode == UDMA0) {
+			UDMATimingRegister |= ATAConfiguration_UDMATiming_SecondaryDevice0CycleTime_0;
+		} else if (UDMATimingMode == UDMA1 ||
+			   UDMATimingMode == UDMA3 ||
+			   UDMATimingMode == UDMA5) {
+			UDMATimingRegister |= ATAConfiguration_UDMATiming_SecondaryDevice0CycleTime_1;
+		} else if (UDMATimingMode == UDMA2 ||
+			   UDMATimingMode == UDMA4) {
+			UDMATimingRegister |= ATAConfiguration_UDMATiming_SecondaryDevice0CycleTime_2;
+		}
+		break;
+	case 1:
+		UDMAControlRegister &= ~(ATAConfiguration_UDMAControl_SecondaryDevice1UDMAModeEnable);
+		if (UDMAEnable == TRUE)
+			UDMAControlRegister |= ATAConfiguration_UDMAControl_SecondaryDevice1UDMAModeEnable;
+
+		IDEIOConfigurationRegister &= ~(ATAConfiguration_IDEIOConfiguration_SecondaryDevice166MhzEnable |
+						ATAConfiguration_IDEIOConfiguration_SecondaryDevice1100MhzEnable);
+
+		if (UDMATimingMode >= UDMA5)
+			IDEIOConfigurationRegister |= ATAConfiguration_IDEIOConfiguration_SecondaryDevice1100MhzEnable;
+		else if (UDMATimingMode >= UDMA3)
+			IDEIOConfigurationRegister |= ATAConfiguration_IDEIOConfiguration_SecondaryDevice166MhzEnable;
+
+		/* if 80 cable report */
+		UDMATimingRegister &= ~(ATAConfiguration_UDMATiming_SecondaryDevice1CycleTime);
+
+		if (UDMATimingMode == UDMA0) {
+			UDMATimingRegister |= ATAConfiguration_UDMATiming_SecondaryDevice1CycleTime_0;
+		} else if (UDMATimingMode == UDMA1 ||
+			   UDMATimingMode == UDMA3 ||
+			   UDMATimingMode == UDMA5) {
+			UDMATimingRegister |= ATAConfiguration_UDMATiming_SecondaryDevice1CycleTime_1;
+		} else if (UDMATimingMode == UDMA2 ||
+			   UDMATimingMode == UDMA4) {
+			UDMATimingRegister |= ATAConfiguration_UDMATiming_SecondaryDevice1CycleTime_2;
+		}
+		break;
+	default:
+		funcresult = FALSE;
+		goto funcexit;
+		break;
+	}
+
+	result = PCIDeviceIO_WritePCIConfiguration(pdev,
+						   ATAConfiguration_ID_UDMAControl + ATAConfiguration_PCIOffset,
+						   ATAConfiguration_ID_UDMAControl_Size,
+						   &UDMAControlRegister);
+	if (result == FALSE) {
+		funcresult = FALSE;
+		goto funcexit;
+	}
+
+	result = PCIDeviceIO_WritePCIConfiguration(pdev,
+						   ATAConfiguration_ID_UDMATiming + ATAConfiguration_PCIOffset,
+						   ATAConfiguration_ID_UDMATiming_Size,
+						   &UDMATimingRegister);
+	if (result == FALSE) {
+		funcresult = FALSE;
+		goto funcexit;
+	}
+
+	result = PCIDeviceIO_WritePCIConfiguration(pdev,
+						   ATAConfiguration_ID_IDEIOConfiguration + ATAConfiguration_PCIOffset,
+						   ATAConfiguration_ID_IDEIOConfiguration_Size,
+						   &IDEIOConfigurationRegister);
+	if (result == FALSE) {
+		funcresult = FALSE;
+		goto funcexit;
+	}
+
+	goto funcexit;
+funcexit:
+	return funcresult;
+}
+
+static int rdc_pata_port_start(struct ata_port *ap)
+{
+	uint    Channel;
+
+	Channel = ap->port_no;
+	dev_dbg(ap->dev, "%s: Channel: %u\n", __func__, Channel);
+	if (ap->ioaddr.bmdma_addr) {
+		return ata_port_start(ap);
+	} else {
+		dev_dbg(ap->dev, "%s: return 0!!!\n", __func__);
+		return 0;
+	}
+}
+
+static void rdc_pata_port_stop(struct ata_port *ap)
+{
+	uint    Channel;
+
+	Channel = ap->port_no;
+
+	dev_dbg(ap->dev, "%s Channel: %u\n", __func__, Channel);
+}
+
+static int rdc_pata_prereset(struct ata_link *link, unsigned long deadline)
+{
+	struct pci_dev *pdev;
+	struct ata_port *ap;
+	uint Channel;
+
+	dev_dbg(link->ap->dev, "%s\n", __func__);
+
+	ap = link->ap;
+	pdev = to_pci_dev(ap->host->dev);
+
+	Channel = ap->port_no;
+
+	/* test ATA Decode Enable Bits, should be enable. */
+	if (!pci_test_config_bits(pdev, &ATA_Decode_Enable_Bits[Channel])) {
+		dev_dbg(link->ap->dev, "%s: Channel: %u, Decode Disable\n",
+			__func__, Channel);
+		return -ENOENT;
+	} else {
+		dev_dbg(link->ap->dev, "%s: Channel: %u, Decode Enable\n",
+			__func__, Channel);
+		return ata_std_prereset(link, deadline);
+	}
+}
+
+static int rdc_pata_cable_detect(struct ata_port *ap)
+{
+	struct pci_dev *pdev;
+	uint Channel;
+	uint Mask;
+	u32 u32Value;
+
+	dev_dbg(ap->dev, "%s\n", __func__);
+
+	pdev = to_pci_dev(ap->host->dev);
+
+	Channel = ap->port_no;
+
+	if (Channel == 0)
+		Mask = ATAConfiguration_IDEIOConfiguration_PrimaryDeviceCable80Report;
+	else
+		Mask = ATAConfiguration_IDEIOConfiguration_SecondaryDeviceCable80Report;
+
+	/* check BIOS cable detect results */
+	pci_read_config_dword(pdev, ATAConfiguration_ID_IDEIOConfiguration + ATAConfiguration_PCIOffset, &u32Value);
+
+	if ((u32Value & Mask) == 0) {
+		dev_dbg(ap->dev, "%s: Channel: %u, PATA40 \n",
+			__func__, Channel);
+		return ATA_CBL_PATA40;
+	} else {
+		dev_dbg(ap->dev, "%s: Channel: %u, PATA80 \n",
+			__func__, Channel);
+		return ATA_CBL_PATA80;
+	}
+}
+
+static void rdc_pata_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	struct pci_dev *pdev;
+	uint    Channel;
+	uint    DeviceID;
+	uint    PIOTimingMode;
+	uint    PrefetchPostingEnable;
+
+	dev_dbg(ap->dev, "%s\n", __func__);
+
+	pdev = to_pci_dev(ap->host->dev);
+
+	Channel = ap->port_no;
+	DeviceID = adev->devno;
+	/*
+	 * piomode = 0, 1, 2, 3... ; adev->pio_mode = XFER_PIO_0, XFER_PIO_1,
+	 * XFER_PIO_2, XFER_PIO_3...
+	 */
+	PIOTimingMode = adev->pio_mode - XFER_PIO_0;
+
+	if (adev->class == ATA_DEV_ATA) {
+		PrefetchPostingEnable = TRUE;
+	} else {
+		/* ATAPI, CD DVD Rom */
+		PrefetchPostingEnable = FALSE;
+	}
+
+	/* PIO configuration clears DTE unconditionally.  It will be
+	 * programmed in set_dmamode which is guaranteed to be called
+	 * after set_piomode if any DMA mode is available.
+	 */
+
+	/* Ensure the UDMA bit is off - it will be turned back on if UDMA is
+	 * selected */
+
+	if (Channel == 0) {
+		ATAHostAdapter_SetPrimaryPIO(
+		    pdev,
+		    DeviceID,
+		    PIOTimingMode,
+		    TRUE,
+		    PrefetchPostingEnable
+		    );
+
+		ATAHostAdapter_SetPrimaryUDMA(
+		    pdev,
+		    DeviceID,
+		    FALSE,
+		    UDMA0
+		    );
+	} else {
+		ATAHostAdapter_SetSecondaryPIO(
+		    pdev,
+		    DeviceID,
+		    PIOTimingMode,
+		    TRUE,
+		    PrefetchPostingEnable
+		    );
+
+		ATAHostAdapter_SetSecondaryUDMA(
+		    pdev,
+		    DeviceID,
+		    FALSE,
+		    UDMA0
+		    );
+	}
+	dev_dbg(ap->dev, "%s: Channel: %u, DeviceID: %u, PIO: %d\n",
+		__func__, Channel, DeviceID, PIOTimingMode);
+}
+
+static void rdc_pata_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+	struct pci_dev *pdev;
+	uint    Channel;
+	uint    DeviceID;
+	uint    PIOTimingMode;
+	uint    PrefetchPostingEnable;
+	uint    DMATimingMode;
+	uint    UDMAEnable;
+
+	dev_dbg(ap->dev, "%s\n", __func__);
+
+	pdev = to_pci_dev(ap->host->dev);
+
+	Channel = ap->port_no;
+	DeviceID = adev->devno;
+	PIOTimingMode = adev->pio_mode - XFER_PIO_0;  /* piomode = 0, 1, 2, 3... ; adev->pio_mode = XFER_PIO_0, XFER_PIO_1, XFER_PIO_2, XFER_PIO_3... */
+	DMATimingMode = adev->dma_mode; /* UDMA or MDMA */
+
+	if (adev->class == ATA_DEV_ATA) {
+		PrefetchPostingEnable = TRUE;
+	} else {
+		/* ATAPI, CD DVD Rom */
+		PrefetchPostingEnable = FALSE;
+	}
+
+	if (ap->udma_mask == 0) {
+		/* ata_port dont support udma. depend on hardware spec. */
+		UDMAEnable = FALSE;
+	} else {
+		UDMAEnable = TRUE;
+	}
+
+	if (Channel == 0) {
+		if (DMATimingMode >= XFER_UDMA_0) {
+			/* UDMA */
+			ATAHostAdapter_SetPrimaryPIO(pdev,
+				DeviceID,
+				PIOTimingMode,
+				TRUE,
+				PrefetchPostingEnable);
+
+			ATAHostAdapter_SetPrimaryUDMA(pdev,
+				DeviceID,
+				UDMAEnable,
+				DMATimingMode - XFER_UDMA_0);
+			dev_dbg(ap->dev,
+				"%s: Channel: %u, DeviceID: %u, UDMA: %u\n",
+				__func__, Channel, DeviceID,
+				(uint)(DMATimingMode - XFER_UDMA_0));
+		} else {
+			/* MDMA */
+			ATAHostAdapter_SetPrimaryPIO(pdev,
+				DeviceID,
+				(DMATimingMode - XFER_MW_DMA_0) + PIO2, /* MDMA0 = PIO2 */
+				TRUE,
+				PrefetchPostingEnable);
+
+			ATAHostAdapter_SetPrimaryUDMA(pdev,
+				DeviceID,
+				FALSE,
+				UDMA0);
+			dev_dbg(ap->dev,
+				"%s: Channel: %u, DeviceID: %u, MDMA: %u\n",
+				__func__, Channel, DeviceID,
+				(uint)(DMATimingMode - XFER_MW_DMA_0));
+		}
+	} else {
+		if (DMATimingMode >= XFER_UDMA_0) {
+			/* UDMA */
+			ATAHostAdapter_SetSecondaryPIO(pdev,
+				DeviceID,
+				PIOTimingMode,
+				TRUE,
+				PrefetchPostingEnable);
+
+			ATAHostAdapter_SetSecondaryUDMA(pdev,
+				DeviceID,
+				UDMAEnable,
+				DMATimingMode - XFER_UDMA_0);
+			dev_dbg(ap->dev,
+				"%s: Channel: %u, DeviceID: %u, UDMA: %u\n",
+				__func__, Channel, DeviceID,
+				(uint)(DMATimingMode - XFER_UDMA_0));
+		} else {
+			/* MDMA */
+			ATAHostAdapter_SetSecondaryPIO(pdev,
+				DeviceID,
+				(DMATimingMode - XFER_MW_DMA_0) + PIO2, /* MDMA0 = PIO2 */
+				TRUE,
+				PrefetchPostingEnable);
+
+			ATAHostAdapter_SetSecondaryUDMA(pdev,
+				DeviceID,
+				FALSE,
+				UDMA0);
+			dev_dbg(ap->dev,
+				"%s: Channel: %u, DeviceID: %u, MDMA: %u \n",
+				__func__, Channel, DeviceID,
+				(uint)(DMATimingMode - XFER_MW_DMA_0));
+		}
+	}
+}
+
+static struct scsi_host_template rdc_pata_sht = {
+	ATA_BMDMA_SHT(KBUILD_MODNAME),
+};
+
+static struct ata_port_operations rdc_pata_ops = {
+	.inherits	= &ata_bmdma_port_ops,
+
+	.port_start	= rdc_pata_port_start,
+	.port_stop	= rdc_pata_port_stop,
+	.prereset	= rdc_pata_prereset,
+	.cable_detect	= rdc_pata_cable_detect,
+	.set_piomode	= rdc_pata_set_piomode,
+	.set_dmamode	= rdc_pata_set_dmamode,
+};
+
+static struct ata_port_info rdc_pata_port_info[] = {
+	[RDC_17F31011] = {
+	.flags		= ATA_FLAG_SLAVE_POSS,
+	.pio_mask	= 0x1f,		/* pio0-4 */
+	.mwdma_mask	= 0x07,		/* mwdma0-2 */
+	.udma_mask	= ATA_UDMA5,	/* udma0-5 */
+	.port_ops	= &rdc_pata_ops,
+	},
+
+	[RDC_17F31012] = {
+	.flags		= ATA_FLAG_SLAVE_POSS,
+	.pio_mask	= 0x1f,		/* pio0-4 */
+	.mwdma_mask	= 0x07,		/* mwdma0-2 */
+	.udma_mask	= ATA_UDMA5,	/* udma0-5 */
+	.port_ops	= &rdc_pata_ops,
+	},
+};
+
+static int __devinit rdc_init_one(struct pci_dev *pdev,
+				  const struct pci_device_id *ent)
+{
+	struct ata_port_info port_info[2];
+	const struct ata_port_info *ppinfo[] = { &port_info[0], &port_info[1] };
+
+	int rc;
+
+	dev_dbg(&pdev->dev, "%s\n", __func__);
+
+	port_info[0] = rdc_pata_port_info[ent->driver_data];
+	port_info[1] = rdc_pata_port_info[ent->driver_data];
+
+	rc = pci_enable_device(pdev);
+	if (rc) {
+		dev_dbg(&pdev->dev, "%s pci_enable_device failed\n", __func__);
+		return rc;
+	}
+	pci_intx(pdev, 1);
+
+	return ata_pci_sff_init_one(pdev, ppinfo, &rdc_pata_sht, NULL);
+}
+
+static struct pci_driver rdc_pata_driver = {
+	.name		= KBUILD_MODNAME,
+	.id_table	= rdc_pata_id_table,
+	.probe		= rdc_init_one,
+	.remove		= ata_pci_remove_one,
+#ifdef CONFIG_PM
+	.suspend	= ata_pci_device_suspend,
+	.resume		= ata_pci_device_resume,
+#endif
+};
+
+static int __init pata_rdc_init(void)
+{
+	return pci_register_driver(&rdc_pata_driver);
+}
+
+static void __exit pata_rdc_exit(void)
+{
+	pci_unregister_driver(&rdc_pata_driver);
+}
+
+module_init(pata_rdc_init);
+module_exit(pata_rdc_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("RDC PCI IDE Driver");
diff --git a/drivers/staging/pata_rdc/pata_rdc.h b/drivers/staging/pata_rdc/pata_rdc.h
new file mode 100644
index 00000000000..a833339886d
--- /dev/null
+++ b/drivers/staging/pata_rdc/pata_rdc.h
@@ -0,0 +1,144 @@
+#ifndef pata_rdc_H
+#define pata_rdc_H
+
+#ifndef TRUE
+#define TRUE	1
+#endif
+
+#ifndef FALSE
+#define FALSE	0
+#endif
+
+/* ATA Configuration Register ID offset address size */
+#define ATAConfiguration_PCIOffset			0x40
+#define ATAConfiguration_ID_PrimaryTiming		0x00
+#define ATAConfiguration_ID_SecondaryTiming		0x02
+#define ATAConfiguration_ID_Device1Timing		0x04
+#define ATAConfiguration_ID_UDMAControl			0x08
+#define ATAConfiguration_ID_UDMATiming			0x0A
+#define ATAConfiguration_ID_IDEIOConfiguration		0x14
+
+#define ATAConfiguration_ID_PrimaryTiming_Size		2
+#define ATAConfiguration_ID_SecondaryTiming_Size	2
+#define ATAConfiguration_ID_Device1Timing_Size		1
+#define ATAConfiguration_ID_UDMAControl_Size		1
+#define ATAConfiguration_ID_UDMATiming_Size		2
+#define ATAConfiguration_ID_IDEIOConfiguration_Size	4
+
+/* ATA Configuration Register bit define */
+#define ATAConfiguration_PrimaryTiming_Device0FastTimingEnable		0x0001
+#define ATAConfiguration_PrimaryTiming_Device0IORDYSampleModeEnable	0x0002	/* PIO 3 or greater */
+#define ATAConfiguration_PrimaryTiming_Device0PrefetchandPostingEnable	0x0004	/* PIO 2 or greater */
+#define ATAConfiguration_PrimaryTiming_Device0DMATimingEnable		0x0008
+#define ATAConfiguration_PrimaryTiming_Device1FastTimingEnable		0x0010
+#define ATAConfiguration_PrimaryTiming_Device1IORDYSampleModeEnable	0x0020	/* PIO 3 or greater */
+#define ATAConfiguration_PrimaryTiming_Device1PrefetchandPostingEnable	0x0040	/* PIO 2 or greater */
+#define ATAConfiguration_PrimaryTiming_Device1DMATimingEnable		0x0080
+#define ATAConfiguration_PrimaryTiming_Device0RecoveryMode		0x0300
+#define ATAConfiguration_PrimaryTiming_Device0RecoveryMode_0		0x0000	/* PIO 0, PIO 2, MDMA 0 */
+#define ATAConfiguration_PrimaryTiming_Device0RecoveryMode_1		0x0100	/* PIO 3, MDMA 1 */
+#define ATAConfiguration_PrimaryTiming_Device0RecoveryMode_2		0x0200	/* X */
+#define ATAConfiguration_PrimaryTiming_Device0RecoveryMode_3		0x0300	/* PIO 4, MDMA 2 */
+#define ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode		0x3000
+#define ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode_0		0x0000	/* PIO 0 */
+#define ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode_1		0x1000	/* PIO 2, MDMA 0 */
+#define ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode_2		0x2000	/* PIO 3, PIO 4, MDMA 1, MDMA 2 */
+#define ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode_3		0x3000	/* X */
+#define ATAConfiguration_PrimaryTiming_Device1TimingRegisterEnable	0x4000
+#define ATAConfiguration_PrimaryTiming_IDEDecodeEnable			0x8000
+
+#define ATAConfiguration_Device1Timing_PrimaryRecoveryMode		0x0003
+#define ATAConfiguration_Device1Timing_PrimaryRecoveryMode_0		0x0000
+#define ATAConfiguration_Device1Timing_PrimaryRecoveryMode_1		0x0001
+#define ATAConfiguration_Device1Timing_PrimaryRecoveryMode_2		0x0002
+#define ATAConfiguration_Device1Timing_PrimaryRecoveryMode_3		0x0003
+#define ATAConfiguration_Device1Timing_PrimaryIORDYSampleMode		0x000C
+#define ATAConfiguration_Device1Timing_PrimaryIORDYSampleMode_0		0x0000
+#define ATAConfiguration_Device1Timing_PrimaryIORDYSampleMode_1		0x0004
+#define ATAConfiguration_Device1Timing_PrimaryIORDYSampleMode_2		0x0008
+#define ATAConfiguration_Device1Timing_PrimaryIORDYSampleMode_3		0x000C
+#define ATAConfiguration_Device1Timing_SecondaryRecoveryMode		0x0030
+#define ATAConfiguration_Device1Timing_SecondaryRecoveryMode_0		0x0000
+#define ATAConfiguration_Device1Timing_SecondaryRecoveryMode_1		0x0010
+#define ATAConfiguration_Device1Timing_SecondaryRecoveryMode_2		0x0020
+#define ATAConfiguration_Device1Timing_SecondaryRecoveryMode_3		0x0030
+#define ATAConfiguration_Device1Timing_SecondaryIORDYSampleMode		0x00C0
+#define ATAConfiguration_Device1Timing_SecondaryIORDYSampleMode_0	0x0000
+#define ATAConfiguration_Device1Timing_SecondaryIORDYSampleMode_1	0x0040
+#define ATAConfiguration_Device1Timing_SecondaryIORDYSampleMode_2	0x0080
+#define ATAConfiguration_Device1Timing_SecondaryIORDYSampleMode_3	0x00C0
+
+#define ATAConfiguration_UDMAControl_PrimaryDevice0UDMAModeEnable	0x0001
+#define ATAConfiguration_UDMAControl_PrimaryDevice1UDMAModeEnable	0x0002
+#define ATAConfiguration_UDMAControl_SecondaryDevice0UDMAModeEnable	0x0004
+#define ATAConfiguration_UDMAControl_SecondaryDevice1UDMAModeEnable	0x0008
+
+#define ATAConfiguration_UDMATiming_PrimaryDevice0CycleTime		0x0003
+#define ATAConfiguration_UDMATiming_PrimaryDevice0CycleTime_0		0x0000	/* UDMA 0 */
+#define ATAConfiguration_UDMATiming_PrimaryDevice0CycleTime_1		0x0001	/* UDMA 1, UDMA 3, UDMA 5 */
+#define ATAConfiguration_UDMATiming_PrimaryDevice0CycleTime_2		0x0002	/* UDMA 2, UDMA 4 */
+#define ATAConfiguration_UDMATiming_PrimaryDevice0CycleTime_3		0x0003	/* X */
+#define ATAConfiguration_UDMATiming_PrimaryDevice1CycleTime		0x0030
+#define ATAConfiguration_UDMATiming_PrimaryDevice1CycleTime_0		0x0000	/* UDMA 0 */
+#define ATAConfiguration_UDMATiming_PrimaryDevice1CycleTime_1		0x0010	/* UDMA 1, UDMA 3, UDMA 5 */
+#define ATAConfiguration_UDMATiming_PrimaryDevice1CycleTime_2		0x0020	/* UDMA 2, UDMA 4 */
+#define ATAConfiguration_UDMATiming_PrimaryDevice1CycleTime_3		0x0030	/* X */
+#define ATAConfiguration_UDMATiming_SecondaryDevice0CycleTime		0x0300
+#define ATAConfiguration_UDMATiming_SecondaryDevice0CycleTime_0		0x0000	/* UDMA 0 */
+#define ATAConfiguration_UDMATiming_SecondaryDevice0CycleTime_1		0x0100	/* UDMA 1, UDMA 3, UDMA 5 */
+#define ATAConfiguration_UDMATiming_SecondaryDevice0CycleTime_2		0x0200	/* UDMA 2, UDMA 4 */
+#define ATAConfiguration_UDMATiming_SecondaryDevice0CycleTime_3		0x0300	/* X */
+#define ATAConfiguration_UDMATiming_SecondaryDevice1CycleTime		0x3000
+#define ATAConfiguration_UDMATiming_SecondaryDevice1CycleTime_0		0x0000	/* UDMA 0 */
+#define ATAConfiguration_UDMATiming_SecondaryDevice1CycleTime_1		0x1000	/* UDMA 1, UDMA 3, UDMA 5 */
+#define ATAConfiguration_UDMATiming_SecondaryDevice1CycleTime_2		0x2000	/* UDMA 2, UDMA 4 */
+#define ATAConfiguration_UDMATiming_SecondaryDevice1CycleTime_3		0x3000	/* X */
+
+#define ATAConfiguration_IDEIOConfiguration_PrimaryDevice066MhzEnable		0x00000001	/* UDMA 3, UDMA 4 */
+#define ATAConfiguration_IDEIOConfiguration_PrimaryDevice166MhzEnable		0x00000002
+#define ATAConfiguration_IDEIOConfiguration_SecondaryDevice066MhzEnable		0x00000004
+#define ATAConfiguration_IDEIOConfiguration_SecondaryDevice166MhzEnable		0x00000008
+#define ATAConfiguration_IDEIOConfiguration_DeviceCable80Report			0x000000F0
+#define ATAConfiguration_IDEIOConfiguration_PrimaryDeviceCable80Report		0x00000030
+#define ATAConfiguration_IDEIOConfiguration_PrimaryDevice0Cable80Report		0x00000010	/* UDMA 3, UDMA 4, UDMA 5 */
+#define ATAConfiguration_IDEIOConfiguration_PrimaryDevice1Cable80Report		0x00000020
+#define ATAConfiguration_IDEIOConfiguration_SecondaryDeviceCable80Report	0x000000C0
+#define ATAConfiguration_IDEIOConfiguration_SecondaryDevice0Cable80Report	0x00000040
+#define ATAConfiguration_IDEIOConfiguration_SecondaryDevice1Cable80Report	0x00000080
+#define ATAConfiguration_IDEIOConfiguration_PrimaryDevice0100MhzEnable		0x00001000	/* UDMA 5 */
+#define ATAConfiguration_IDEIOConfiguration_PrimaryDevice1100MhzEnable		0x00002000
+#define ATAConfiguration_IDEIOConfiguration_SecondaryDevice0100MhzEnable	0x00004000
+#define ATAConfiguration_IDEIOConfiguration_SecondaryDevice1100MhzEnable	0x00008000
+#define ATAConfiguration_IDEIOConfiguration_ATA100IsSupported			0x00F00000
+
+enum _PIOTimingMode {
+	PIO0 = 0,
+	PIO1,
+	PIO2,	/* MDMA 0 */
+	PIO3,	/* MDMA 1 */
+	PIO4	/* MDMA 2 */
+};
+
+enum _DMATimingMode {
+	MDMA0 = 0,
+	MDMA1,
+	MDMA2
+};
+
+enum _UDMATimingMode {
+	UDMA0 = 0,
+	UDMA1,
+	UDMA2,
+	UDMA3,
+	UDMA4,
+	UDMA5
+};
+
+
+enum rdc_controller_ids {
+	/* controller IDs */
+	RDC_17F31011,
+	RDC_17F31012
+};
+
+#endif
diff --git a/drivers/staging/pohmelfs/crypto.c b/drivers/staging/pohmelfs/crypto.c
index 31d765de92c..19781ad782f 100644
--- a/drivers/staging/pohmelfs/crypto.c
+++ b/drivers/staging/pohmelfs/crypto.c
@@ -832,8 +832,7 @@ int pohmelfs_trans_crypt(struct netfs_trans *trans, struct pohmelfs_sb *psb)
 	return pohmelfs_crypto_thread_get(psb, pohmelfs_trans_crypt_action, trans);
 }
 
-struct pohmelfs_crypto_input_action_data
-{
+struct pohmelfs_crypto_input_action_data {
 	struct page			*page;
 	struct pohmelfs_crypto_engine	*e;
 	u64				iv;
diff --git a/drivers/staging/pohmelfs/dir.c b/drivers/staging/pohmelfs/dir.c
index b5799842fb8..4c58e22c1fb 100644
--- a/drivers/staging/pohmelfs/dir.c
+++ b/drivers/staging/pohmelfs/dir.c
@@ -562,7 +562,7 @@ struct dentry *pohmelfs_lookup(struct inode *dir, struct dentry *dentry, struct
 		if (!inode) {
 			dprintk("%s: No inode for ino: %lu, name: '%s', hash: %x.\n",
 				__func__, ino, str.name, str.hash);
-			//return NULL;
+			/* return NULL; */
 			return ERR_PTR(-EACCES);
 		}
 	} else {
@@ -692,9 +692,9 @@ static int pohmelfs_remove_entry(struct inode *dir, struct dentry *dentry)
 	n = pohmelfs_search_hash(parent, str.hash);
 	if (n) {
 		pohmelfs_fix_offset(parent, n);
-		if (test_bit(NETFS_INODE_REMOTE_SYNCED, &pi->state)) {
+		if (test_bit(NETFS_INODE_REMOTE_SYNCED, &pi->state))
 			pohmelfs_remove_child(pi, n);
-		}
+
 		pohmelfs_name_free(parent, n);
 		err = 0;
 	}
@@ -1006,9 +1006,8 @@ static int pohmelfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	pi = POHMELFS_I(inode);
 	old_parent = POHMELFS_I(old_dir);
 
-	if (new_dir) {
+	if (new_dir)
 		new_dir->i_sb->s_op->write_inode(new_dir, 0);
-	}
 
 	old_hash = jhash(old_dentry->d_name.name, old_dentry->d_name.len, 0);
 	str.hash = jhash(new_dentry->d_name.name, new_dentry->d_name.len, 0);
diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c
index b2eaf904726..7b605795b77 100644
--- a/drivers/staging/pohmelfs/inode.c
+++ b/drivers/staging/pohmelfs/inode.c
@@ -386,7 +386,7 @@ static int pohmelfs_write_inode_create_children(struct inode *inode)
 		if (inode && (inode->i_state & I_DIRTY)) {
 			struct pohmelfs_inode *pi = POHMELFS_I(inode);
 			pohmelfs_write_create_inode(pi);
-			//pohmelfs_meta_command(pi, NETFS_INODE_INFO, 0, NULL, NULL, 0);
+			/* pohmelfs_meta_command(pi, NETFS_INODE_INFO, 0, NULL, NULL, 0); */
 			iput(inode);
 		}
 	}
@@ -845,7 +845,7 @@ static void pohmelfs_destroy_inode(struct inode *inode)
 	struct pohmelfs_sb *psb = POHMELFS_SB(sb);
 	struct pohmelfs_inode *pi = POHMELFS_I(inode);
 
-	//pohmelfs_data_unlock(pi, 0, inode->i_size, POHMELFS_READ_LOCK);
+	/* pohmelfs_data_unlock(pi, 0, inode->i_size, POHMELFS_READ_LOCK); */
 
 	pohmelfs_inode_del_inode(psb, pi);
 
@@ -943,7 +943,7 @@ err_out_unlock:
 	return ret;
 }
 
-const static struct file_operations pohmelfs_file_ops = {
+static const struct file_operations pohmelfs_file_ops = {
 	.open		= generic_file_open,
 	.fsync		= pohmelfs_fsync,
 
@@ -1529,9 +1529,9 @@ static void pohmelfs_drop_scan(struct work_struct *work)
 	struct pohmelfs_inode *pi;
 	unsigned int count = 0;
 
-	while ((pi = pohmelfs_get_inode_from_list(psb, &psb->drop_list, &count))) {
+	while ((pi = pohmelfs_get_inode_from_list(psb, &psb->drop_list, &count)))
 		pohmelfs_put_inode_count(pi, count);
-	}
+
 	pohmelfs_check_states(psb);
 
 	if (psb->drop_scan_timeout)
@@ -1568,9 +1568,8 @@ static void pohmelfs_trans_scan_state(struct netfs_state *st)
 		rb_node = rb_next(rb_node);
 
 		err = -ETIMEDOUT;
-		if (timeout && (++dst->retries < psb->trans_retries)) {
+		if (timeout && (++dst->retries < psb->trans_retries))
 			err = netfs_trans_resend(t, psb);
-		}
 
 		if (err || (t->flags & NETFS_TRANS_SINGLE_DST)) {
 			if (netfs_trans_remove_nolock(dst, st))
@@ -1777,7 +1776,7 @@ static int pohmelfs_show_stats(struct seq_file *m, struct vfsmount *mnt)
 		seq_printf(m, "%u ", ctl->idx);
 		if (ctl->addr.sa_family == AF_INET) {
 			struct sockaddr_in *sin = (struct sockaddr_in *)&st->ctl.addr;
-			//seq_printf(m, "%pi4:%u", &sin->sin_addr.s_addr, ntohs(sin->sin_port));
+			/* seq_printf(m, "%pi4:%u", &sin->sin_addr.s_addr, ntohs(sin->sin_port)); */
 			seq_printf(m, "%u.%u.%u.%u:%u", NIPQUAD(sin->sin_addr.s_addr), ntohs(sin->sin_port));
 		} else if (ctl->addr.sa_family == AF_INET6) {
 			struct sockaddr_in6 *sin = (struct sockaddr_in6 *)&st->ctl.addr;
diff --git a/drivers/staging/pohmelfs/net.c b/drivers/staging/pohmelfs/net.c
index 11ecac026ca..5f312c91aab 100644
--- a/drivers/staging/pohmelfs/net.c
+++ b/drivers/staging/pohmelfs/net.c
@@ -168,8 +168,7 @@ int pohmelfs_data_recv_and_check(struct netfs_state *st, void *data, unsigned in
  * Polling machinery.
  */
 
-struct netfs_poll_helper
-{
+struct netfs_poll_helper {
 	poll_table 		pt;
 	struct netfs_state	*st;
 };
@@ -915,9 +914,9 @@ static int pohmelfs_recv(void *data)
 				unsigned char *hash = e->data;
 
 				dprintk("%s: received hash: ", __func__);
-				for (i=0; i<cmd->csize; ++i) {
+				for (i=0; i<cmd->csize; ++i)
 					printk("%02x ", hash[i]);
-				}
+
 				printk("\n");
 			}
 #endif
diff --git a/drivers/staging/pohmelfs/netfs.h b/drivers/staging/pohmelfs/netfs.h
index c78cfcb042f..3b60c611ba8 100644
--- a/drivers/staging/pohmelfs/netfs.h
+++ b/drivers/staging/pohmelfs/netfs.h
@@ -30,8 +30,7 @@
  * Network command structure.
  * Will be extended.
  */
-struct netfs_cmd
-{
+struct netfs_cmd {
 	__u16			cmd;	/* Command number */
 	__u16			csize;	/* Attached crypto information size */
 	__u16			cpad;	/* Attached padding size */
@@ -96,8 +95,7 @@ enum {
  */
 #define _K_SS_MAXSIZE	128
 
-struct saddr
-{
+struct saddr {
 	unsigned short		sa_family;
 	char			addr[_K_SS_MAXSIZE];
 };
@@ -107,8 +105,7 @@ enum {
 	POHMELFS_CRYPTO_CIPHER,
 };
 
-struct pohmelfs_crypto
-{
+struct pohmelfs_crypto {
 	unsigned int		idx;		/* Config index */
 	unsigned short		strlen;		/* Size of the attached crypto string including 0-byte
 						 * "cbc(aes)" for example */
@@ -123,8 +120,7 @@ struct pohmelfs_crypto
 /*
  * Configuration command used to create table of different remote servers.
  */
-struct pohmelfs_ctl
-{
+struct pohmelfs_ctl {
 	__u32			idx;		/* Config index */
 	__u32			type;		/* Socket type */
 	__u32			proto;		/* Socket protocol */
@@ -137,8 +133,7 @@ struct pohmelfs_ctl
 /*
  * Ack for userspace about requested command.
  */
-struct pohmelfs_cn_ack
-{
+struct pohmelfs_cn_ack {
 	struct cn_msg		msg;
 	int			error;
 	int			msg_num;
@@ -150,8 +145,7 @@ struct pohmelfs_cn_ack
  * Inode info structure used to sync with server.
  * Check what stat() returns.
  */
-struct netfs_inode_info
-{
+struct netfs_inode_info {
 	unsigned int		mode;
 	unsigned int		nlink;
 	unsigned int		uid;
@@ -205,8 +199,7 @@ enum pohmelfs_capabilities {
 /* Extended attributes support on/off */
 #define POHMELFS_FLAGS_XATTR		(1<<1)
 
-struct netfs_root_capabilities
-{
+struct netfs_root_capabilities {
 	__u64			nr_files;
 	__u64			used, avail;
 	__u64			flags;
@@ -220,8 +213,7 @@ static inline void netfs_convert_root_capabilities(struct netfs_root_capabilitie
 	cap->flags = __cpu_to_be64(cap->flags);
 }
 
-struct netfs_crypto_capabilities
-{
+struct netfs_crypto_capabilities {
 	unsigned short		hash_strlen;	/* Hash string length, like "hmac(sha1) including 0 byte "*/
 	unsigned short		cipher_strlen;	/* Cipher string length with the same format */
 	unsigned int		cipher_keysize;	/* Cipher key size */
@@ -241,8 +233,7 @@ enum pohmelfs_lock_type {
 	POHMELFS_WRITE_LOCK,
 };
 
-struct netfs_lock
-{
+struct netfs_lock {
 	__u64			start;
 	__u64			ino;
 	__u32			size;
@@ -268,8 +259,7 @@ static inline void netfs_convert_lock(struct netfs_lock *lock)
 /*
  * Private POHMELFS cache of objects in directory.
  */
-struct pohmelfs_name
-{
+struct pohmelfs_name {
 	struct rb_node		hash_node;
 
 	struct list_head	sync_create_entry;
@@ -286,8 +276,7 @@ struct pohmelfs_name
 /*
  * POHMELFS inode. Main object.
  */
-struct pohmelfs_inode
-{
+struct pohmelfs_inode {
 	struct list_head	inode_entry;		/* Entry in superblock list.
 							 * Objects which are not bound to dentry require to be dropped
 							 * in ->put_super()
@@ -318,8 +307,7 @@ typedef int (* netfs_trans_complete_t)(struct page **pages, unsigned int page_nu
 struct netfs_state;
 struct pohmelfs_sb;
 
-struct netfs_trans
-{
+struct netfs_trans {
 	/*
 	 * Transaction header and attached contiguous data live here.
 	 */
@@ -426,8 +414,7 @@ static inline void netfs_trans_reset(struct netfs_trans *t)
 	t->complete = NULL;
 }
 
-struct netfs_trans_dst
-{
+struct netfs_trans_dst {
 	struct list_head		trans_entry;
 	struct rb_node			state_entry;
 
@@ -456,8 +443,7 @@ int netfs_trans_remove_nolock(struct netfs_trans_dst *dst, struct netfs_state *s
 int netfs_trans_init(void);
 void netfs_trans_exit(void);
 
-struct pohmelfs_crypto_engine
-{
+struct pohmelfs_crypto_engine {
 	u64				iv;		/* Crypto IV for current operation */
 	unsigned long			timeout;	/* Crypto waiting timeout */
 	unsigned int			size;		/* Size of crypto scratchpad */
@@ -474,8 +460,7 @@ struct pohmelfs_crypto_engine
 	unsigned int			page_num;
 };
 
-struct pohmelfs_crypto_thread
-{
+struct pohmelfs_crypto_thread {
 	struct list_head		thread_entry;
 
 	struct task_struct		*thread;
@@ -497,8 +482,7 @@ void pohmelfs_crypto_thread_make_ready(struct pohmelfs_crypto_thread *th);
 /*
  * Network state, attached to one server.
  */
-struct netfs_state
-{
+struct netfs_state {
 	struct mutex		__state_lock;		/* Can not allow to use the same socket simultaneously */
 	struct mutex		__state_send_lock;
 	struct netfs_cmd 	cmd;			/* Cached command */
@@ -580,8 +564,7 @@ static inline unsigned int netfs_state_poll(struct netfs_state *st)
 
 struct pohmelfs_config;
 
-struct pohmelfs_sb
-{
+struct pohmelfs_sb {
 	struct rb_root		mcache_root;
 	struct mutex		mcache_lock;
 	atomic_long_t		mcache_gen;
@@ -718,15 +701,13 @@ static inline void pohmelfs_put_inode(struct pohmelfs_inode *pi)
 	spin_unlock(&psb->ino_lock);
 }
 
-struct pohmelfs_config
-{
+struct pohmelfs_config {
 	struct list_head	config_entry;
 
 	struct netfs_state	state;
 };
 
-struct pohmelfs_config_group
-{
+struct pohmelfs_config_group {
 	/*
 	 * Entry in the global config group list.
 	 */
@@ -814,8 +795,7 @@ void pohmelfs_switch_active(struct pohmelfs_sb *psb);
 int pohmelfs_construct_path_string(struct pohmelfs_inode *pi, void *data, int len);
 int pohmelfs_path_length(struct pohmelfs_inode *pi);
 
-struct pohmelfs_crypto_completion
-{
+struct pohmelfs_crypto_completion {
 	struct completion	complete;
 	int			error;
 };
@@ -864,7 +844,7 @@ static inline int pohmelfs_need_lock(struct pohmelfs_inode *pi, int type)
 int __init pohmelfs_mcache_init(void);
 void pohmelfs_mcache_exit(void);
 
-//#define CONFIG_POHMELFS_DEBUG
+/* #define CONFIG_POHMELFS_DEBUG */
 
 #ifdef CONFIG_POHMELFS_DEBUG
 #define dprintka(f, a...) printk(f, ##a)
@@ -891,8 +871,7 @@ static inline void netfs_trans_put(struct netfs_trans *t)
 	}
 }
 
-struct pohmelfs_mcache
-{
+struct pohmelfs_mcache {
 	struct rb_node			mcache_entry;
 	struct completion		complete;
 
diff --git a/drivers/staging/pohmelfs/trans.c b/drivers/staging/pohmelfs/trans.c
index fef5f9bd692..4587f6d546a 100644
--- a/drivers/staging/pohmelfs/trans.c
+++ b/drivers/staging/pohmelfs/trans.c
@@ -101,7 +101,8 @@ static int netfs_trans_send_pages(struct netfs_trans *t, struct netfs_state *st)
 			goto err_out;
 		}
 
-		msg.msg_flags = MSG_WAITALL|(attached_pages == 1)?0:MSG_MORE;
+		msg.msg_flags = MSG_WAITALL | (attached_pages == 1 ? 0 :
+				MSG_MORE);
 
 		err = kernel_sendpage(st->socket, page, 0, size, msg.msg_flags);
 		if (err <= 0) {
@@ -177,9 +178,9 @@ int netfs_trans_send(struct netfs_trans *t, struct netfs_state *st)
 
 err_out_unlock_return:
 
-	if (st->need_reset) {
+	if (st->need_reset)
 		netfs_state_exit(st);
-	}
+
 	netfs_state_unlock_send(st);
 
 	dprintk("%s: t: %p, gen: %u, err: %d.\n",
diff --git a/drivers/staging/rspiusb/rspiusb.c b/drivers/staging/rspiusb/rspiusb.c
index ecaffb50311..1cdfe69585e 100644
--- a/drivers/staging/rspiusb/rspiusb.c
+++ b/drivers/staging/rspiusb/rspiusb.c
@@ -39,7 +39,11 @@ static int debug;
 #endif
 /* Use our own dbg macro */
 #undef dbg
-#define dbg(format, arg...) do { if (debug) printk(KERN_DEBUG __FILE__ ": " format "\n" , ## arg); } while (0)
+#define dbg(format, arg...) \
+	do { \
+		if (debug) \
+			printk(KERN_DEBUG __FILE__ ": " format "\n" , ##arg); \
+	} while (0)
 
 /* Version Information */
 #define DRIVER_VERSION "V1.0.1"
@@ -63,52 +67,58 @@ static DECLARE_MUTEX(disconnect_sem);
 
 /* Structure to hold all of our device specific stuff */
 struct device_extension {
-	struct usb_device *udev;	/* save off the usb device pointer */
-	struct usb_interface *interface;	/* the interface for this device */
-	unsigned char minor;	/* the starting minor number for this device */
+	struct usb_device *udev;	 /* save off the usb device pointer */
+	struct usb_interface *interface; /* the interface for this device */
+	unsigned char minor;		 /* the starting minor number
+					  * for this device
+					  */
 	size_t bulk_in_size_returned;
 	int bulk_in_byte_trk;
 	struct urb ***PixelUrb;
 	int frameIdx;
 	int urbIdx;
 	unsigned int *maplist_numPagesMapped;
-	int open;		/* if the port is open or not */
-	int present;		/* if the device is not disconnected */
-	int userBufMapped;	/* has the user buffer been mapped? */
-	struct scatterlist **sgl;	/* scatter-gather list for user buffer */
+	int open;		  /* if the port is open or not */
+	int present;		  /* if the device is not disconnected */
+	int userBufMapped;	  /* has the user buffer been mapped ? */
+	struct scatterlist **sgl; /* scatter-gather list for user buffer */
 	unsigned int *sgEntries;
 	struct kref kref;
 	int gotPixelData;
 	int pendingWrite;
 	char **pendedPixelUrbs;
-	int iama;		/*PIXIS or ST133 */
-	int num_frames;		/* the number of frames that will fit in the user buffer */
+	int iama;		 /* PIXIS or ST133 */
+	int num_frames;		 /* the number of frames that will fit
+				  * in the user buffer
+				  */
 	int active_frame;
 	unsigned long frameSize;
 	struct semaphore sem;
-	//FX2 specific endpoints
-	unsigned int hEP[8];
+	unsigned int hEP[8];	 /* FX2 specific endpoints */
 };
-#define to_pi_dev(d) container_of( d, struct device_extension, kref )
 
+#define to_pi_dev(d) container_of(d, struct device_extension, kref)
+
+/* Prototypes */
 static int MapUserBuffer(struct ioctl_struct *, struct device_extension *);
 static int UnMapUserBuffer(struct device_extension *);
 static int piusb_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 		       unsigned long arg);
-static int piusb_output(struct ioctl_struct *, unsigned char *, int, struct device_extension *);
+static int piusb_output(struct ioctl_struct *, unsigned char *, int,
+		struct device_extension *);
 static struct usb_driver piusb_driver;
 
 /* table of devices that work with this driver */
 static struct usb_device_id pi_device_table[] = {
 	{USB_DEVICE(VENDOR_ID, ST133_PID)},
 	{USB_DEVICE(VENDOR_ID, PIXIS_PID)},
-	{0, }			/* Terminating entry */
+	{0, } /* Terminating entry */
 };
 
 MODULE_DEVICE_TABLE(usb, pi_device_table);
 
-static int lastErr = 0;
-static int errCnt = 0;
+static int lastErr;
+static int errCnt;
 
 static void piusb_delete(struct kref *kref)
 {
@@ -143,25 +153,29 @@ static int piusb_open(struct inode *inode, struct file *file)
 	}
 	dbg("Alternate Setting = %d", interface->num_altsetting);
 
-	pdx->frameIdx = pdx->urbIdx = 0;
+	pdx->bulk_in_size_returned = 0;
+	pdx->bulk_in_byte_trk = 0;
+	pdx->PixelUrb = NULL;
+	pdx->frameIdx = 0;
+	pdx->urbIdx = 0;
+	pdx->maplist_numPagesMapped = NULL;
+	pdx->userBufMapped = 0;
+	pdx->sgl = NULL;
+	pdx->sgEntries = NULL;
 	pdx->gotPixelData = 0;
 	pdx->pendingWrite = 0;
-	pdx->frameSize = 0;
+	pdx->pendedPixelUrbs = NULL;
 	pdx->num_frames = 0;
 	pdx->active_frame = 0;
-	pdx->bulk_in_byte_trk = 0;
-	pdx->userBufMapped = 0;
-	pdx->pendedPixelUrbs = NULL;
-	pdx->sgEntries = NULL;
-	pdx->sgl = NULL;
-	pdx->maplist_numPagesMapped = NULL;
-	pdx->PixelUrb = NULL;
-	pdx->bulk_in_size_returned = 0;
+	pdx->frameSize = 0;
+
 	/* increment our usage count for the device */
 	kref_get(&pdx->kref);
+
 	/* save our object in the file's private structure */
 	file->private_data = pdx;
-      exit_no_device:
+
+exit_no_device:
 	return retval;
 }
 
@@ -174,13 +188,91 @@ static int piusb_release(struct inode *inode, struct file *file)
 	pdx = (struct device_extension *)file->private_data;
 	if (pdx == NULL) {
 		dbg("%s - object is NULL", __func__);
-		return -ENODEV;
+		retval = -ENODEV;
+		goto object_null;
 	}
 	/* decrement the count on our device */
 	kref_put(&pdx->kref, piusb_delete);
+
+object_null:
 	return retval;
 }
 
+static int pixis_io(struct ioctl_struct *ctrl, struct device_extension *pdx,
+		struct ioctl_struct *arg)
+{
+	unsigned int numToRead = 0;
+	unsigned int totalRead = 0;
+	unsigned char *uBuf;
+	int numbytes;
+	int i;
+
+	uBuf = kmalloc(ctrl->numbytes, GFP_KERNEL);
+	if (!uBuf) {
+		dbg("Alloc for uBuf failed");
+		return 0;
+	}
+	numbytes = (int) ctrl->numbytes;
+	numToRead = (unsigned int) ctrl->numbytes;
+	dbg("numbytes to read = %d", numbytes);
+	dbg("endpoint # %d", ctrl->endpoint);
+
+	if (copy_from_user(uBuf, ctrl->pData, numbytes)) {
+		dbg("copying ctrl->pData to dummyBuf failed");
+		return -EFAULT;
+	}
+
+	do {
+		i = usb_bulk_msg(pdx->udev, pdx->hEP[ctrl->endpoint],
+				(uBuf + totalRead),
+				/* EP0 can only handle 64 bytes at a time */
+				(numToRead > 64) ? 64 : numToRead,
+				&numbytes, HZ * 10);
+		if (i) {
+			dbg("CMD = %s, Address = 0x%02X",
+					((uBuf[3] == 0x02) ? "WRITE" : "READ"),
+					uBuf[1]);
+			dbg("Number of bytes Attempted to read = %d",
+					(int)ctrl->numbytes);
+			dbg("Blocking ReadI/O Failed with status %d", i);
+			kfree(uBuf);
+			return -1;
+		}
+		dbg("Pixis EP0 Read %d bytes", numbytes);
+		totalRead += numbytes;
+		numToRead -= numbytes;
+	} while (numToRead);
+
+	memcpy(ctrl->pData, uBuf, totalRead);
+	dbg("Total Bytes Read from PIXIS EP0 = %d", totalRead);
+	ctrl->numbytes = totalRead;
+
+	if (copy_to_user(arg, ctrl, sizeof(struct ioctl_struct)))
+		dbg("copy_to_user failed in IORB");
+
+	kfree(uBuf);
+	return ctrl->numbytes;
+}
+
+static int pixel_data(struct ioctl_struct *ctrl, struct device_extension *pdx)
+{
+	int i;
+
+	if (!pdx->gotPixelData)
+		return 0;
+
+	pdx->gotPixelData = 0;
+	ctrl->numbytes = pdx->bulk_in_size_returned;
+	pdx->bulk_in_size_returned -= pdx->frameSize;
+
+	for (i = 0; i < pdx->maplist_numPagesMapped[pdx->active_frame]; i++)
+		SetPageDirty(sg_page(&pdx->sgl[pdx->active_frame][i]));
+
+	pdx->active_frame = ((pdx->active_frame + 1) % pdx->num_frames);
+
+	return ctrl->numbytes;
+}
+
 /**
  *	piusb_ioctl
  */
@@ -190,12 +282,9 @@ static int piusb_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 	struct device_extension *pdx;
 	char dummyCtlBuf[] = { 0, 0, 0, 0, 0, 0, 0, 0 };
 	unsigned long devRB = 0;
-	int i = 0;
 	int err = 0;
 	int retval = 0;
 	struct ioctl_struct ctrl;
-	unsigned char *uBuf;
-	int numbytes = 0;
 	unsigned short controlData = 0;
 
 	pdx = (struct device_extension *)file->private_data;
@@ -206,18 +295,22 @@ static int piusb_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 	}
 	/* fill in your device specific stuff here */
 	if (_IOC_DIR(cmd) & _IOC_READ)
-		err = !access_ok(VERIFY_WRITE, (void __user *)arg, _IOC_SIZE(cmd));
+		err = !access_ok(VERIFY_WRITE, (void __user *)arg,
+				_IOC_SIZE(cmd));
 	else if (_IOC_DIR(cmd) & _IOC_WRITE)
-		err = !access_ok(VERIFY_READ, (void __user *)arg, _IOC_SIZE(cmd));
+		err = !access_ok(VERIFY_READ, (void __user *)arg,
+			       _IOC_SIZE(cmd));
 	if (err) {
 		dev_err(&pdx->udev->dev, "return with error = %d\n", err);
 		return -EFAULT;
 	}
 	switch (cmd) {
 	case PIUSB_GETVNDCMD:
-		if (copy_from_user
-		    (&ctrl, (void __user *)arg, sizeof(struct ioctl_struct)))
-			info("copy_from_user failed\n");
+		if (__copy_from_user
+		    (&ctrl, (void __user *)arg, sizeof(struct ioctl_struct))) {
+			dev_err(&pdx->udev->dev, "copy_from_user failed\n");
+			return -EFAULT;
+		}
 		dbg("%s %x\n", "Get Vendor Command = ", ctrl.cmd);
 		retval =
 		    usb_control_msg(pdx->udev, usb_rcvctrlpipe(pdx->udev, 0),
@@ -227,167 +320,85 @@ static int piusb_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			dbg("FW Version returned from HW = %ld.%ld",
 			    (devRB >> 8), (devRB & 0xFF));
 		}
-		return devRB;
+		if (retval >= 0)
+			retval = (int)devRB;
+		return retval;
+
 	case PIUSB_SETVNDCMD:
-		if (copy_from_user
-		    (&ctrl, (void __user *)arg, sizeof(struct ioctl_struct)))
-			info("copy_from_user failed\n");
-//            dbg( "%s %x", "Set Vendor Command = ",ctrl.cmd );
+		if (__copy_from_user
+		    (&ctrl, (void __user *)arg, sizeof(struct ioctl_struct))) {
+			dev_err(&pdx->udev->dev, "copy_from_user failed\n");
+			return -EFAULT;
+		}
+		/* dbg( "%s %x", "Set Vendor Command = ",ctrl.cmd ); */
 		controlData = ctrl.pData[0];
 		controlData |= (ctrl.pData[1] << 8);
-//            dbg( "%s %d", "Vendor Data =",controlData );
-		retval = usb_control_msg(pdx->udev, usb_sndctrlpipe(pdx->udev, 0), ctrl.cmd, (USB_DIR_OUT | USB_TYPE_VENDOR),	/* | USB_RECIP_ENDPOINT), */
-					 controlData,
-					 0,
-					 &dummyCtlBuf, ctrl.numbytes, HZ * 10);
+		/* dbg( "%s %d", "Vendor Data =",controlData ); */
+		retval = usb_control_msg(pdx->udev,
+				usb_sndctrlpipe(pdx->udev, 0),
+				ctrl.cmd,
+				(USB_DIR_OUT | USB_TYPE_VENDOR
+				 /* | USB_RECIP_ENDPOINT */),
+				controlData, 0,
+				&dummyCtlBuf, ctrl.numbytes, HZ * 10);
 		return retval;
-		break;
+
 	case PIUSB_ISHIGHSPEED:
 		return ((pdx->udev->speed == USB_SPEED_HIGH) ? 1 : 0);
-		break;
+
 	case PIUSB_WRITEPIPE:
-		if (copy_from_user(&ctrl, (void __user *)arg, _IOC_SIZE(cmd)))
-			info("copy_from_user WRITE_DUMMY failed\n");
+		if (__copy_from_user(&ctrl, (void __user *)arg, _IOC_SIZE(cmd))) {
+			dev_err(&pdx->udev->dev,
+					"copy_from_user WRITE_DUMMY failed\n");
+			return -EFAULT;
+		}
 		if (!access_ok(VERIFY_READ, ctrl.pData, ctrl.numbytes)) {
 			dbg("can't access pData");
 			return 0;
 		}
-		piusb_output(&ctrl, ctrl.pData /*uBuf */ , ctrl.numbytes, pdx);
+		piusb_output(&ctrl, ctrl.pData /* uBuf */, ctrl.numbytes, pdx);
 		return ctrl.numbytes;
-		break;
+
 	case PIUSB_USERBUFFER:
-		if (copy_from_user
-		    (&ctrl, (void __user *)arg, sizeof(struct ioctl_struct)))
-			info("copy_from_user failed\n");
-		return MapUserBuffer((struct ioctl_struct *) & ctrl, pdx);
-		break;
+		if (__copy_from_user
+		    (&ctrl, (void __user *)arg, sizeof(struct ioctl_struct))) {
+			dev_err(&pdx->udev->dev, "copy_from_user failed\n");
+			return -EFAULT;
+		}
+		return MapUserBuffer((struct ioctl_struct *) &ctrl, pdx);
+
 	case PIUSB_UNMAP_USERBUFFER:
-		UnMapUserBuffer(pdx);
-		return 0;
-		break;
+		retval = UnMapUserBuffer(pdx);
+		return retval;
+
 	case PIUSB_READPIPE:
-		if (copy_from_user
-		    (&ctrl, (void __user *)arg, sizeof(struct ioctl_struct)))
-			info("copy_from_user failed\n");
-		switch (ctrl.endpoint) {
-		case 0:	//ST133 Pixel Data or PIXIS IO
-			if (pdx->iama == PIXIS_PID) {
-				unsigned int numToRead = 0;
-				unsigned int totalRead = 0;
-				uBuf = kmalloc(ctrl.numbytes, GFP_KERNEL);
-				if (!uBuf) {
-					dbg("Alloc for uBuf failed");
-					return 0;
-				}
-				numbytes = ctrl.numbytes;
-				numToRead = numbytes;
-				dbg("numbytes to read = %d", numbytes);
-				dbg("endpoint # %d", ctrl.endpoint);
-				if (copy_from_user(uBuf, ctrl.pData, numbytes))
-					dbg("copying ctrl.pData to dummyBuf failed");
-				do {
-					i = usb_bulk_msg(pdx->udev, pdx->hEP[ctrl.endpoint], (uBuf + totalRead), (numToRead > 64) ? 64 : numToRead, &numbytes, HZ * 10);	//EP0 can only handle 64 bytes at a time
-					if (i) {
-						dbg("CMD = %s, Address = 0x%02X", ((uBuf[3] == 0x02) ? "WRITE" : "READ"), uBuf[1]);
-						dbg("Number of bytes Attempted to read = %d", (int)ctrl.numbytes);
-						dbg("Blocking ReadI/O Failed with status %d", i);
-						kfree(uBuf);
-						return -1;
-					} else {
-						dbg("Pixis EP0 Read %d bytes",
-						    numbytes);
-						totalRead += numbytes;
-						numToRead -= numbytes;
-					}
-				}
-				while (numToRead);
-				memcpy(ctrl.pData, uBuf, totalRead);
-				dbg("Total Bytes Read from PIXIS EP0 = %d",
-				    totalRead);
-				ctrl.numbytes = totalRead;
-				if (copy_to_user
-				    ((struct ioctl_struct *) arg, &ctrl,
-				     sizeof(struct ioctl_struct)))
-					dbg("copy_to_user failed in IORB");
-				kfree(uBuf);
-				return ctrl.numbytes;
-			} else	//ST133 Pixel Data
-			{
-				if (!pdx->gotPixelData)
-					return 0;
-				else {
-					pdx->gotPixelData = 0;
-					ctrl.numbytes =
-					    pdx->bulk_in_size_returned;
-					pdx->bulk_in_size_returned -=
-					    pdx->frameSize;
-					for (i = 0; i < pdx->maplist_numPagesMapped[pdx->active_frame]; i++)
-						SetPageDirty(pdx->sgl[pdx->active_frame][i].page_link);
-					pdx->active_frame =
-					    ((pdx->active_frame +
-					      1) % pdx->num_frames);
-					return ctrl.numbytes;
-				}
-			}
-			break;
-		case 1:	//ST133IO
-		case 4:	//PIXIS IO
-			uBuf = kmalloc(ctrl.numbytes, GFP_KERNEL);
-			if (!uBuf) {
-				dbg("Alloc for uBuf failed");
-				return 0;
-			}
-			numbytes = ctrl.numbytes;
-//                                      dbg( "numbytes to read = %d", numbytes );
-			if (copy_from_user(uBuf, ctrl.pData, numbytes))
-				dbg("copying ctrl.pData to dummyBuf failed");
-			i = usb_bulk_msg(pdx->udev, pdx->hEP[ctrl.endpoint],
-					 uBuf, numbytes, &numbytes, HZ * 10);
-			if (i) {
-				dbg("Blocking ReadI/O Failed with status %d",
-				    i);
-				kfree(uBuf);
-				return -1;
-			} else {
-				ctrl.numbytes = numbytes;
-				memcpy(ctrl.pData, uBuf, numbytes);
-				if (copy_to_user
-				    ((struct ioctl_struct *) arg, &ctrl,
-				     sizeof(struct ioctl_struct)))
-					dbg("copy_to_user failed in IORB");
-				kfree(uBuf);
-				return ctrl.numbytes;
-			}
-			break;
-
-		case 2:	//PIXIS Ping
-		case 3:	//PIXIS Pong
-			if (!pdx->gotPixelData)
-				return 0;
-			else {
-				pdx->gotPixelData = 0;
-				ctrl.numbytes = pdx->bulk_in_size_returned;
-				pdx->bulk_in_size_returned -= pdx->frameSize;
-				for (i = 0;
-				     i <
-				     pdx->maplist_numPagesMapped[pdx->
-								 active_frame];
-				     i++)
-					SetPageDirty(pdx->sgl[pdx->active_frame][i].page_link);
-				pdx->active_frame =
-				    ((pdx->active_frame + 1) % pdx->num_frames);
-				return ctrl.numbytes;
-			}
-			break;
+		if (__copy_from_user(&ctrl, (void __user *)arg,
+					sizeof(struct ioctl_struct))) {
+			dev_err(&pdx->udev->dev, "copy_from_user failed\n");
+			return -EFAULT;
 		}
+		if (((0 == ctrl.endpoint) && (PIXIS_PID == pdx->iama)) ||
+				(1 == ctrl.endpoint) ||	/* ST133IO */
+				(4 == ctrl.endpoint))	/* PIXIS IO */
+			return pixis_io(&ctrl, pdx,
+					(struct ioctl_struct *)arg);
+		else if ((0 == ctrl.endpoint) || /* ST133 Pixel Data */
+				(2 == ctrl.endpoint) || /* PIXIS Ping */
+				(3 == ctrl.endpoint))	/* PIXIS Pong */
+			return pixel_data(&ctrl, pdx);
+
 		break;
+
 	case PIUSB_WHATCAMERA:
 		return pdx->iama;
+
 	case PIUSB_SETFRAMESIZE:
 		dbg("PIUSB_SETFRAMESIZE");
-		if (copy_from_user
-		    (&ctrl, (void __user *)arg, sizeof(struct ioctl_struct)))
-			info("copy_from_user failed\n");
+		if (__copy_from_user
+		    (&ctrl, (void __user *)arg, sizeof(struct ioctl_struct))) {
+			dev_err(&pdx->udev->dev, "copy_from_user failed\n");
+			return -EFAULT;
+		}
 		pdx->frameSize = ctrl.numbytes;
 		pdx->num_frames = ctrl.numFrames;
 		if (!pdx->sgl)
@@ -410,6 +421,7 @@ static int piusb_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			    kmalloc(sizeof(char *) * pdx->num_frames,
 				    GFP_KERNEL);
 		return 0;
+
 	default:
 		dbg("%s\n", "No IOCTL found");
 		break;
@@ -436,7 +448,7 @@ static void piusb_write_bulk_callback(struct urb *urb)
 			urb->transfer_buffer, urb->transfer_dma);
 }
 
-int piusb_output(struct ioctl_struct * io, unsigned char *uBuf, int len,
+int piusb_output(struct ioctl_struct *io, unsigned char *uBuf, int len,
 		 struct device_extension *pdx)
 {
 	struct urb *urb = NULL;
@@ -449,10 +461,13 @@ int piusb_output(struct ioctl_struct * io, unsigned char *uBuf, int len,
 		    usb_buffer_alloc(pdx->udev, len, GFP_KERNEL,
 				     &urb->transfer_dma);
 		if (!kbuf) {
-			info("buffer_alloc failed\n");
+			dev_err(&pdx->udev->dev, "buffer_alloc failed\n");
 			return -ENOMEM;
 		}
-		memcpy(kbuf, uBuf, len);
+		if(__copy_from_user(kbuf, uBuf, len)) {
+			dev_err(&pdx->udev->dev, "__copy_from_user failed\n");
+			return -EFAULT;
+		}
 		usb_fill_bulk_urb(urb, pdx->udev, pdx->hEP[io->endpoint], kbuf,
 				  len, piusb_write_bulk_callback, pdx);
 		urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
@@ -472,6 +487,7 @@ static int UnMapUserBuffer(struct device_extension *pdx)
 	int i = 0;
 	int k = 0;
 	unsigned int epAddr;
+
 	for (k = 0; k < pdx->num_frames; k++) {
 		dbg("Killing Urbs for Frame %d", k);
 		for (i = 0; i < pdx->sgEntries[k]; i++) {
@@ -485,23 +501,19 @@ static int UnMapUserBuffer(struct device_extension *pdx)
 	}
 
 	for (k = 0; k < pdx->num_frames; k++) {
-		if (pdx->iama == PIXIS_PID)	//if so, which EP should we map this frame to
-		{
-			if (k % 2)	//check to see if this should use EP4(PONG)
-			{
-				epAddr = pdx->hEP[3];	//PONG, odd frames
-			} else {
-				epAddr = pdx->hEP[2];	//PING, even frames and zero
-			}
-		} else		//ST133 only has 1 endpoint for Pixel data transfer
-		{
+		if (pdx->iama == PIXIS_PID)
+			/* which EP should we map this frame to ? */
+			/* PONG, odd frames: hEP[3] */
+			/* PING, even frames and zero hEP[2] */
+			epAddr = (k % 2) ? pdx->hEP[3] : pdx->hEP[2];
+		else
+			/* ST133 only has 1 endpoint for Pixel data transfer */
 			epAddr = pdx->hEP[0];
-		}
+
 		usb_buffer_unmap_sg(pdx->udev, epAddr, pdx->sgl[k],
 				    pdx->maplist_numPagesMapped[k]);
-		for (i = 0; i < pdx->maplist_numPagesMapped[k]; i++) {
-			page_cache_release(pdx->sgl[k][i].page_link);
-		}
+		for (i = 0; i < pdx->maplist_numPagesMapped[k]; i++)
+			page_cache_release(sg_page(&pdx->sgl[k][i]));
 		kfree(pdx->sgl[k]);
 		kfree(pdx->PixelUrb[k]);
 		kfree(pdx->pendedPixelUrbs[k]);
@@ -509,6 +521,7 @@ static int UnMapUserBuffer(struct device_extension *pdx)
 		pdx->PixelUrb[k] = NULL;
 		pdx->pendedPixelUrbs[k] = NULL;
 	}
+
 	kfree(pdx->sgEntries);
 	vfree(pdx->maplist_numPagesMapped);
 	pdx->sgEntries = NULL;
@@ -519,6 +532,7 @@ static int UnMapUserBuffer(struct device_extension *pdx)
 	pdx->sgl = NULL;
 	pdx->pendedPixelUrbs = NULL;
 	pdx->PixelUrb = NULL;
+
 	return 0;
 }
 
@@ -539,26 +553,25 @@ static void piusb_readPIXEL_callback(struct urb *urb)
 		pdx->pendedPixelUrbs[pdx->frameIdx][pdx->urbIdx] = 0;
 	} else {
 		pdx->bulk_in_byte_trk += urb->actual_length;
-		{
-			i = usb_submit_urb(urb, GFP_ATOMIC);	//resubmit the URB
-			if (i) {
-				errCnt++;
-				if (i != lastErr) {
-					dbg("submit urb in callback failed with error code %d", i);
-					lastErr = i;
-				}
-			} else {
-				pdx->urbIdx++;	//point to next URB when we callback
-				if (pdx->bulk_in_byte_trk >= pdx->frameSize) {
-					pdx->bulk_in_size_returned =
-					    pdx->bulk_in_byte_trk;
-					pdx->bulk_in_byte_trk = 0;
-					pdx->gotPixelData = 1;
-					pdx->frameIdx =
-					    ((pdx->frameIdx +
-					      1) % pdx->num_frames);
-					pdx->urbIdx = 0;
-				}
+		i = usb_submit_urb(urb, GFP_ATOMIC);	/* resubmit the URB */
+		if (i) {
+			errCnt++;
+			if (i != lastErr) {
+				dbg("submit urb in callback failed "
+						"with error code %d", i);
+				lastErr = i;
+			}
+		} else {
+			pdx->urbIdx++; /* point to next URB when we callback */
+			if (pdx->bulk_in_byte_trk >= pdx->frameSize) {
+				pdx->bulk_in_size_returned =
+					pdx->bulk_in_byte_trk;
+				pdx->bulk_in_byte_trk = 0;
+				pdx->gotPixelData = 1;
+				pdx->frameIdx =
+					((pdx->frameIdx +
+					  1) % pdx->num_frames);
+				pdx->urbIdx = 0;
 			}
 		}
 	}
@@ -566,24 +579,37 @@ static void piusb_readPIXEL_callback(struct urb *urb)
 
 /* MapUserBuffer(
 	inputs:
-	struct ioctl_struct *io - structure containing user address, frame #, and size
+	struct ioctl_struct *io - structure containing user address,
+				frame #, and size
 	struct device_extension *pdx - the PIUSB device extension
+
 	returns:
 	int - status of the task
+
 	Notes:
-	MapUserBuffer maps a buffer passed down through an ioctl.  The user buffer is Page Aligned by the app
-	and then passed down.  The function get_free_pages(...) does the actual mapping of the buffer from user space to
-	kernel space.  From there a scatterlist is created from all the pages.  The next function called is to usb_buffer_map_sg
-	which allocated DMA addresses for each page, even coalescing them if possible.  The DMA address is placed in the scatterlist
-	structure.  The function returns the number of DMA addresses.  This may or may not be equal to the number of pages that
-	the user buffer uses.  We then build an URB for each DMA address and then submit them.
+	MapUserBuffer maps a buffer passed down through an ioctl.
+	The user buffer is Page Aligned by the app and then passed down.
+	The function get_free_pages(...) does the actual mapping of the buffer
+	from user space to kernel space.
+	From there a scatterlist is created from all the pages.
+	The next function called is to usb_buffer_map_sg which allocated
+	DMA addresses for each page, even coalescing them if possible.
+	The DMA address is placed in the scatterlist structure.
+	The function returns the number of DMA addresses.
+	This may or may not be equal to the number of pages that
+	the user buffer uses.
+	We then build an URB for each DMA address and then submit them.
+*/
+
+/*
+int MapUserBuffer(unsigned long uaddr, unsigned long numbytes,
+		unsigned long frameInfo, struct device_extension *pdx)
 */
-//int MapUserBuffer( unsigned long uaddr, unsigned long numbytes, unsigned long frameInfo, struct device_extension *pdx )
 static int MapUserBuffer(struct ioctl_struct *io, struct device_extension *pdx)
 {
 	unsigned long uaddr;
 	unsigned long numbytes;
-	int frameInfo;		//which frame we're mapping
+	int frameInfo;	/* which frame we're mapping */
 	unsigned int epAddr = 0;
 	unsigned long count = 0;
 	int i = 0;
@@ -591,45 +617,45 @@ static int MapUserBuffer(struct ioctl_struct *io, struct device_extension *pdx)
 	int err = 0;
 	struct page **maplist_p;
 	int numPagesRequired;
+
 	frameInfo = io->numFrames;
 	uaddr = (unsigned long)io->pData;
 	numbytes = io->numbytes;
 
-	if (pdx->iama == PIXIS_PID)	//if so, which EP should we map this frame to
-	{
-		if (frameInfo % 2)	//check to see if this should use EP4(PONG)
-		{
-			epAddr = pdx->hEP[3];	//PONG, odd frames
-		} else {
-			epAddr = pdx->hEP[2];	//PING, even frames and zero
-		}
+	if (pdx->iama == PIXIS_PID) {
+		/* which EP should we map this frame to ? */
+		/* PONG, odd frames: hEP[3] */
+		/* PING, even frames and zero hEP[2] */
+		epAddr = (frameInfo % 2) ? pdx->hEP[3] : pdx->hEP[2];
 		dbg("Pixis Frame #%d: EP=%d", frameInfo,
 		    (epAddr == pdx->hEP[2]) ? 2 : 4);
-	} else			//ST133 only has 1 endpoint for Pixel data transfer
-	{
+	} else { /* ST133 only has 1 endpoint for Pixel data transfer */
 		epAddr = pdx->hEP[0];
 		dbg("ST133 Frame #%d: EP=2", frameInfo);
 	}
 	count = numbytes;
 	dbg("UserAddress = 0x%08lX", uaddr);
 	dbg("numbytes = %d", (int)numbytes);
-	//number of pages to map the entire user space DMA buffer
+
+	/* number of pages to map the entire user space DMA buffer */
 	numPagesRequired =
 	    ((uaddr & ~PAGE_MASK) + count + ~PAGE_MASK) >> PAGE_SHIFT;
 	dbg("Number of pages needed = %d", numPagesRequired);
-	maplist_p = vmalloc(numPagesRequired * sizeof(struct page));	//, GFP_ATOMIC);
+	maplist_p = vmalloc(numPagesRequired * sizeof(struct page));
 	if (!maplist_p) {
 		dbg("Can't Allocate Memory for maplist_p");
 		return -ENOMEM;
 	}
-	//map the user buffer to kernel memory
+
+	/* map the user buffer to kernel memory */
 	down_write(&current->mm->mmap_sem);
-	pdx->maplist_numPagesMapped[frameInfo] = get_user_pages(current, current->mm, (uaddr & PAGE_MASK), numPagesRequired, WRITE, 0,	//Don't Force
-								maplist_p,
-								NULL);
+	pdx->maplist_numPagesMapped[frameInfo] = get_user_pages(current,
+			current->mm, (uaddr & PAGE_MASK), numPagesRequired,
+			WRITE, 0 /* Don't Force*/, maplist_p, NULL);
 	up_write(&current->mm->mmap_sem);
 	dbg("Number of pages mapped = %d",
 	    pdx->maplist_numPagesMapped[frameInfo]);
+
 	for (i = 0; i < pdx->maplist_numPagesMapped[frameInfo]; i++)
 		flush_dcache_page(maplist_p[i]);
 	if (!pdx->maplist_numPagesMapped[frameInfo]) {
@@ -637,7 +663,10 @@ static int MapUserBuffer(struct ioctl_struct *io, struct device_extension *pdx)
 		vfree(maplist_p);
 		return -ENOMEM;
 	}
-	//need to create a scatterlist that spans each frame that can fit into the mapped buffer
+
+	/* need to create a scatterlist that spans each frame
+	 * that can fit into the mapped buffer
+	 */
 	pdx->sgl[frameInfo] =
 	    kmalloc((pdx->maplist_numPagesMapped[frameInfo] *
 		     sizeof(struct scatterlist)), GFP_ATOMIC);
@@ -646,7 +675,7 @@ static int MapUserBuffer(struct ioctl_struct *io, struct device_extension *pdx)
 		dbg("can't allocate mem for sgl");
 		return -ENOMEM;
 	}
-	pdx->sgl[frameInfo][0].page_link = maplist_p[0];
+	sg_assign_page(&pdx->sgl[frameInfo][0], maplist_p[0]);
 	pdx->sgl[frameInfo][0].offset = uaddr & ~PAGE_MASK;
 	if (pdx->maplist_numPagesMapped[frameInfo] > 1) {
 		pdx->sgl[frameInfo][0].length =
@@ -654,10 +683,10 @@ static int MapUserBuffer(struct ioctl_struct *io, struct device_extension *pdx)
 		count -= pdx->sgl[frameInfo][0].length;
 		for (k = 1; k < pdx->maplist_numPagesMapped[frameInfo]; k++) {
 			pdx->sgl[frameInfo][k].offset = 0;
-			pdx->sgl[frameInfo][k].page_link = maplist_p[k];
+			sg_assign_page(&pdx->sgl[frameInfo][k], maplist_p[k]);
 			pdx->sgl[frameInfo][k].length =
 			    (count < PAGE_SIZE) ? count : PAGE_SIZE;
-			count -= PAGE_SIZE;	//example had PAGE_SIZE here;
+			count -= PAGE_SIZE; /* example had PAGE_SIZE here */
 		}
 	} else {
 		pdx->sgl[frameInfo][0].length = count;
@@ -668,7 +697,8 @@ static int MapUserBuffer(struct ioctl_struct *io, struct device_extension *pdx)
 	dbg("number of sgEntries = %d", pdx->sgEntries[frameInfo]);
 	pdx->userBufMapped = 1;
 	vfree(maplist_p);
-	//Create and Send the URB's for each s/g entry
+
+	/* Create and Send the URB's for each s/g entry */
 	pdx->PixelUrb[frameInfo] =
 	    kmalloc(pdx->sgEntries[frameInfo] * sizeof(struct urb *),
 		    GFP_KERNEL);
@@ -677,7 +707,8 @@ static int MapUserBuffer(struct ioctl_struct *io, struct device_extension *pdx)
 		return -ENOMEM;
 	}
 	for (i = 0; i < pdx->sgEntries[frameInfo]; i++) {
-		pdx->PixelUrb[frameInfo][i] = usb_alloc_urb(0, GFP_KERNEL);	//0 because we're using BULK transfers
+		/* 0 iso packets because we're using BULK transfers */
+		pdx->PixelUrb[frameInfo][i] = usb_alloc_urb(0, GFP_KERNEL);
 		usb_fill_bulk_urb(pdx->PixelUrb[frameInfo][i],
 				  pdx->udev,
 				  epAddr,
@@ -691,7 +722,8 @@ static int MapUserBuffer(struct ioctl_struct *io, struct device_extension *pdx)
 		pdx->PixelUrb[frameInfo][i]->transfer_flags =
 		    URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT;
 	}
-	pdx->PixelUrb[frameInfo][--i]->transfer_flags &= ~URB_NO_INTERRUPT;	//only interrupt when last URB completes
+	/* only interrupt when last URB completes */
+	pdx->PixelUrb[frameInfo][--i]->transfer_flags &= ~URB_NO_INTERRUPT;
 	pdx->pendedPixelUrbs[frameInfo] =
 	    kmalloc((pdx->sgEntries[frameInfo] * sizeof(char)), GFP_KERNEL);
 	if (!pdx->pendedPixelUrbs[frameInfo])
@@ -702,13 +734,13 @@ static int MapUserBuffer(struct ioctl_struct *io, struct device_extension *pdx)
 			dbg("%s %d\n", "submit urb error =", err);
 			pdx->pendedPixelUrbs[frameInfo][i] = 0;
 			return err;
-		} else
-			pdx->pendedPixelUrbs[frameInfo][i] = 1;;
+		}
+		pdx->pendedPixelUrbs[frameInfo][i] = 1;
 	}
 	return 0;
 }
 
-static struct file_operations piusb_fops = {
+static const struct file_operations piusb_fops = {
 	.owner = THIS_MODULE,
 	.ioctl = piusb_ioctl,
 	.open = piusb_open,
@@ -751,9 +783,9 @@ static int piusb_probe(struct usb_interface *interface,
 	/* See if the device offered us matches what we can accept */
 	if ((pdx->udev->descriptor.idVendor != VENDOR_ID)
 	    || ((pdx->udev->descriptor.idProduct != PIXIS_PID)
-		&& (pdx->udev->descriptor.idProduct != ST133_PID))) {
+		&& (pdx->udev->descriptor.idProduct != ST133_PID)))
 		return -ENODEV;
-	}
+
 	pdx->iama = pdx->udev->descriptor.idProduct;
 
 	if (debug) {
@@ -807,7 +839,7 @@ static int piusb_probe(struct usb_interface *interface,
 	dbg("PI USB2.0 device now attached to piusb-%d", pdx->minor);
 	return 0;
 
-      error:
+error:
 	if (pdx)
 		kref_put(&pdx->kref, piusb_delete);
 	return retval;
@@ -828,12 +860,17 @@ static void piusb_disconnect(struct usb_interface *interface)
 {
 	struct device_extension *pdx;
 	int minor = interface->minor;
+
 	lock_kernel();
+
 	pdx = usb_get_intfdata(interface);
 	usb_set_intfdata(interface, NULL);
+
 	/* give back our minor */
 	usb_deregister_dev(interface, &piusb_class);
+
 	unlock_kernel();
+
 	/* prevent device read, write and ioctl */
 	pdx->present = 0;
 	kref_put(&pdx->kref, piusb_delete);
@@ -853,16 +890,20 @@ static struct usb_driver piusb_driver = {
 static int __init piusb_init(void)
 {
 	int result;
+
+	lastErr = 0;
+	errCnt = 0;
+
 	/* register this driver with the USB subsystem */
 	result = usb_register(&piusb_driver);
-	if (result) {
+	if (result)
 		printk(KERN_ERR KBUILD_MODNAME
-		       ": usb_register failed. Error number %d\n", result);
-		return result;
-	}
-	printk(KERN_INFO KBUILD_MODNAME ":%s: %s\n", DRIVER_DESC,
-	       DRIVER_VERSION);
-	return 0;
+				": usb_register failed. Error number %d\n",
+				result);
+	else
+		printk(KERN_INFO KBUILD_MODNAME ":%s: %s\n", DRIVER_DESC,
+				DRIVER_VERSION);
+	return result;
 }
 
 /**
diff --git a/drivers/staging/rspiusb/rspiusb.h b/drivers/staging/rspiusb/rspiusb.h
index 965cd2d8c19..3fc1db7b1c4 100644
--- a/drivers/staging/rspiusb/rspiusb.h
+++ b/drivers/staging/rspiusb/rspiusb.h
@@ -3,20 +3,28 @@
 
 #define PIUSB_MAGIC		'm'
 #define PIUSB_IOCTL_BASE	192
-#define PIUSB_GETVNDCMD		_IOR(PIUSB_MAGIC, PIUSB_IOCTL_BASE + 1, struct ioctl_struct)
-#define PIUSB_SETVNDCMD		_IOW(PIUSB_MAGIC, PIUSB_IOCTL_BASE + 2, struct ioctl_struct)
-#define PIUSB_WRITEPIPE		_IOW(PIUSB_MAGIC, PIUSB_IOCTL_BASE + 3, struct ioctl_struct)
-#define PIUSB_READPIPE		_IOR(PIUSB_MAGIC, PIUSB_IOCTL_BASE + 4, struct ioctl_struct)
-#define PIUSB_SETFRAMESIZE	_IOW(PIUSB_MAGIC, PIUSB_IOCTL_BASE + 5, struct ioctl_struct)
-#define PIUSB_WHATCAMERA	_IO(PIUSB_MAGIC,  PIUSB_IOCTL_BASE + 6)
-#define PIUSB_USERBUFFER	_IOW(PIUSB_MAGIC, PIUSB_IOCTL_BASE + 7, struct ioctl_struct)
-#define PIUSB_ISHIGHSPEED	_IO(PIUSB_MAGIC,  PIUSB_IOCTL_BASE + 8)
-#define PIUSB_UNMAP_USERBUFFER	_IOW(PIUSB_MAGIC, PIUSB_IOCTL_BASE + 9, struct ioctl_struct)
+
+#define PIUSB_IOR(offset) \
+	_IOR(PIUSB_MAGIC, PIUSB_IOCTL_BASE + offset, struct ioctl_struct)
+#define PIUSB_IOW(offset) \
+	_IOW(PIUSB_MAGIC, PIUSB_IOCTL_BASE + offset, struct ioctl_struct)
+#define PIUSB_IO(offset) \
+	_IO(PIUSB_MAGIC, PIUSB_IOCTL_BASE + offset)
+
+#define PIUSB_GETVNDCMD		PIUSB_IOR(1)
+#define PIUSB_SETVNDCMD		PIUSB_IOW(2)
+#define PIUSB_WRITEPIPE		PIUSB_IOW(3)
+#define PIUSB_READPIPE		PIUSB_IOR(4)
+#define PIUSB_SETFRAMESIZE	PIUSB_IOW(5)
+#define PIUSB_WHATCAMERA	PIUSB_IO(6)
+#define PIUSB_USERBUFFER	PIUSB_IOW(7)
+#define PIUSB_ISHIGHSPEED	PIUSB_IO(8)
+#define PIUSB_UNMAP_USERBUFFER	PIUSB_IOW(9)
 
 struct ioctl_struct {
 	unsigned char cmd;
 	unsigned long numbytes;
-	unsigned char dir;	//1=out;0=in
+	unsigned char dir;	/* 1=out; 0=in */
 	int endpoint;
 	int numFrames;
 	unsigned char *pData;
diff --git a/drivers/staging/rt2860/2860_main_dev.c b/drivers/staging/rt2860/2860_main_dev.c
index ff7f8338073..c7038e03a4d 100644
--- a/drivers/staging/rt2860/2860_main_dev.c
+++ b/drivers/staging/rt2860/2860_main_dev.c
@@ -37,13 +37,6 @@
 
 #include "rt_config.h"
 
-
-#ifdef MULTIPLE_CARD_SUPPORT
-// record whether the card in the card list is used in the card file
-extern UINT8  MC_CardUsed[];
-#endif // MULTIPLE_CARD_SUPPORT //
-
-
 extern INT __devinit rt28xx_probe(IN void *_dev_p, IN void *_dev_id_p,
 									IN UINT argc, OUT PRTMP_ADAPTER *ppAd);
 
@@ -110,13 +103,10 @@ static struct pci_device_id rt2860_pci_tbl[] __devinitdata =
 };
 
 MODULE_DEVICE_TABLE(pci, rt2860_pci_tbl);
-#ifdef CONFIG_STA_SUPPORT
 MODULE_LICENSE("GPL");
 #ifdef MODULE_VERSION
 MODULE_VERSION(STA_DRIVER_VERSION);
 #endif
-#endif // CONFIG_STA_SUPPORT //
-
 
 //
 // Our PCI driver structure
@@ -328,14 +318,6 @@ static VOID __devexit rt2860_remove_one(
 
 	if (pAd != NULL)
 	{
-#ifdef MULTIPLE_CARD_SUPPORT
-		if ((pAd->MC_RowID >= 0) && (pAd->MC_RowID <= MAX_NUM_OF_MULTIPLE_CARD))
-			MC_CardUsed[pAd->MC_RowID] = 0; // not clear MAC address
-#endif // MULTIPLE_CARD_SUPPORT //
-
-
-
-
 		// Unregister network device
 		unregister_netdev(net_dev);
 
@@ -494,10 +476,8 @@ static void rx_done_tasklet(unsigned long data)
     pObj = (POS_COOKIE) pAd->OS_Cookie;
 
 	pAd->int_pending &= ~(INT_RX);
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		bReschedule = STARxDoneInterruptHandle(pAd, 0);
-#endif // CONFIG_STA_SUPPORT //
+
+	bReschedule = STARxDoneInterruptHandle(pAd, 0);
 
 	RTMP_INT_LOCK(&pAd->irq_lock, flags);
 	/*
@@ -933,15 +913,8 @@ rt2860_interrupt(int irq, void *dev_instance)
 		RTMPHandleTBTTInterrupt(pAd);
 	}
 
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if (IntSource.word & AutoWakeupInt)
-			RTMPHandleTwakeupInterrupt(pAd);
-	}
-#endif // CONFIG_STA_SUPPORT //
+	if (IntSource.word & AutoWakeupInt)
+		RTMPHandleTwakeupInterrupt(pAd);
 
     return  IRQ_HANDLED;
 }
@@ -1182,9 +1155,7 @@ VOID RT28xx_UpdateBeaconToAsic(
 	else
 	{
 		ptr = (PUCHAR)&pAd->BeaconTxWI;
-#ifdef RT_BIG_ENDIAN
-		RTMPWIEndianChange(ptr, TYPE_TXWI);
-#endif
+
 		for (i=0; i<TXWI_SIZE; i+=4)  // 16-byte TXWI field
 		{
 			UINT32 longptr =  *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
@@ -1212,7 +1183,6 @@ VOID RT28xx_UpdateBeaconToAsic(
 
 }
 
-#ifdef CONFIG_STA_SUPPORT
 VOID RTMPInitPCIeLinkCtrlValue(
 	IN	PRTMP_ADAPTER	pAd)
 {
@@ -1256,7 +1226,6 @@ VOID RTMPPCIeLinkCtrlSetting(
 	IN 	USHORT		Max)
 {
 }
-#endif // CONFIG_STA_SUPPORT //
 
 VOID rt2860_stop(struct net_device *net_dev)
 {
diff --git a/drivers/staging/rt2860/Makefile b/drivers/staging/rt2860/Makefile
index b9563647846..c9fe92583d7 100644
--- a/drivers/staging/rt2860/Makefile
+++ b/drivers/staging/rt2860/Makefile
@@ -2,11 +2,8 @@ obj-$(CONFIG_RT2860)	+= rt2860sta.o
 
 # TODO: all of these should be removed
 EXTRA_CFLAGS += -DLINUX -DAGGREGATION_SUPPORT -DPIGGYBACK_SUPPORT -DWMM_SUPPORT
-EXTRA_CFLAGS += -DCONFIG_STA_SUPPORT
+EXTRA_CFLAGS += -DRT2860
 EXTRA_CFLAGS += -DDBG
-EXTRA_CFLAGS += -DDOT11_N_SUPPORT
-EXTRA_CFLAGS += -DWPA_SUPPLICANT_SUPPORT
-EXTRA_CFLAGS += -DNATIVE_WPA_SUPPLICANT_SUPPORT
 
 rt2860sta-objs :=	\
 	common/md5.o		\
diff --git a/drivers/staging/rt2860/ap.h b/drivers/staging/rt2860/ap.h
index df6db281312..a814d55abef 100644
--- a/drivers/staging/rt2860/ap.h
+++ b/drivers/staging/rt2860/ap.h
@@ -159,9 +159,6 @@ USHORT APBuildAssociation(
     IN UCHAR  *pRSNLen,
     IN BOOLEAN bWmmCapable,
     IN ULONG  RalinkIe,
-#ifdef DOT11N_DRAFT3
-    IN EXT_CAP_INFO_ELEMENT ExtCapInfo,
-#endif // DOT11N_DRAFT3 //
 	IN HT_CAPABILITY_IE		*pHtCapability,
 	IN UCHAR		 HtCapabilityLen,
     OUT USHORT *pAid);
@@ -282,11 +279,6 @@ VOID SupportRate(
 BOOLEAN ApScanRunning(
 	IN PRTMP_ADAPTER pAd);
 
-#ifdef DOT11N_DRAFT3
-VOID APOverlappingBSSScan(
-	IN RTMP_ADAPTER *pAd);
-#endif // DOT11N_DRAFT3 //
-
 // ap_wpa.c
 
 VOID APWpaStateMachineInit(
@@ -332,6 +324,13 @@ VOID APQuickResponeForRateUpExec(
     IN PVOID SystemSpecific2,
     IN PVOID SystemSpecific3);
 
+#ifdef RT2870
+VOID BeaconUpdateExec(
+    IN PVOID SystemSpecific1,
+    IN PVOID FunctionContext,
+    IN PVOID SystemSpecific2,
+    IN PVOID SystemSpecific3);
+#endif // RT2870 //
 
 VOID RTMPSetPiggyBack(
 	IN PRTMP_ADAPTER	pAd,
@@ -408,10 +407,8 @@ VOID ApLogEvent(
     IN PUCHAR           pAddr,
     IN USHORT           Event);
 
-#ifdef DOT11_N_SUPPORT
 VOID APUpdateOperationMode(
     IN PRTMP_ADAPTER pAd);
-#endif // DOT11_N_SUPPORT //
 
 VOID APUpdateCapabilityAndErpIe(
 	IN PRTMP_ADAPTER pAd);
@@ -472,9 +469,6 @@ BOOLEAN PeerAssocReqCmmSanity(
     OUT UCHAR *pRSNLen,
     OUT BOOLEAN *pbWmmCapable,
     OUT ULONG  *pRalinkIe,
-#ifdef DOT11N_DRAFT3
-    OUT EXT_CAP_INFO_ELEMENT	*pExtCapInfo,
-#endif // DOT11N_DRAFT3 //
     OUT UCHAR		 *pHtCapabilityLen,
     OUT HT_CAPABILITY_IE *pHtCapability);
 
@@ -529,26 +523,6 @@ BOOLEAN APPeerBeaconAndProbeRspSanity(
     OUT BOOLEAN *ExtendedRateIeExist,
     OUT UCHAR *Erp);
 
-// ap_info.c
-
-#ifdef WIN_NDIS
-NDIS_STATUS APQueryInformation(
-    IN  NDIS_HANDLE MiniportAdapterContext,
-    IN  NDIS_OID    Oid,
-    IN  PVOID       pInformationBuffer,
-    IN  ULONG       InformationBufferLength,
-    OUT PULONG      pBytesWritten,
-    OUT PULONG      pBytesNeeded);
-
-NDIS_STATUS APSetInformation(
-    IN  NDIS_HANDLE MiniportAdapterContext,
-    IN  NDIS_OID    Oid,
-    IN  PVOID       pInformationBuffer,
-    IN  ULONG       InformationBufferLength,
-    OUT PULONG      pBytesRead,
-    OUT PULONG      pBytesNeeded);
-#endif
-
 
 // ================== end of AP RTMP.h ========================
 
diff --git a/drivers/staging/rt2860/chlist.h b/drivers/staging/rt2860/chlist.h
index 9e15b9daeb8..1ad26b57408 100644
--- a/drivers/staging/rt2860/chlist.h
+++ b/drivers/staging/rt2860/chlist.h
@@ -524,7 +524,12 @@ static CH_REGION ChRegion[] =
 			JAP,
 			{
 				{ 1,   14,  20, BOTH, FALSE},	// 2.4 G, ch 1~14
+#ifndef RT30xx
 				{ 36, 	4,  23, IDOR, FALSE},	// 5G, ch 36~48
+#endif
+#ifdef RT30xx
+				{ 34, 	4,  23, IDOR, FALSE},	// 5G, ch 34~46
+#endif
 				{ 0},							// end
 			}
 		},
@@ -957,16 +962,12 @@ static inline VOID ChBandCheck(
 	switch(PhyMode)
 	{
 		case PHY_11A:
-#ifdef DOT11_N_SUPPORT
 		case PHY_11AN_MIXED:
-#endif // DOT11_N_SUPPORT //
 			*pChType = BAND_5G;
 			break;
 		case PHY_11ABG_MIXED:
-#ifdef DOT11_N_SUPPORT
 		case PHY_11AGN_MIXED:
 		case PHY_11ABGN_MIXED:
-#endif // DOT11_N_SUPPORT //
 			*pChType = BAND_BOTH;
 			break;
 
@@ -1114,8 +1115,6 @@ static inline VOID BuildBeaconChList(
 	}
 }
 
-
-#ifdef DOT11_N_SUPPORT
 static inline BOOLEAN IsValidChannel(
 	IN PRTMP_ADAPTER pAd,
 	IN UCHAR channel)
@@ -1201,49 +1200,6 @@ static inline VOID N_ChannelCheck(
 				pAd->CommonCfg.RegTransmitSetting.field.BW  = BW_20;
 				//pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_NONE;	// We didn't set the ExtCh as NONE due to it'll set in RTMPSetHT()
 			}
-#if 0
-			switch (pAd->CommonCfg.CountryRegion  & 0x7f)
-			{
-				case REGION_0_BG_BAND:	// 1 -11
-				case REGION_1_BG_BAND:	// 1 - 13
-				case REGION_5_BG_BAND:	// 1 - 14
-					if (Channel <= 4)
-					{
-						pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_ABOVE;
-					}
-					else if (Channel >= 8)
-					{
-						if ((ChannelNum - Channel) < 4)
-							pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_BELOW;
-					}
-					break;
-
-				case REGION_2_BG_BAND:	// 10 - 11
-				case REGION_3_BG_BAND:	// 10 - 13
-				case REGION_4_BG_BAND:	// 14
-					pAd->CommonCfg.RegTransmitSetting.field.BW  = BW_20;
-					break;
-
-				case REGION_6_BG_BAND:	// 3 - 9
-					if (Channel <= 5)
-						pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_ABOVE;
-					else if (Channel == 6)
-						pAd->CommonCfg.RegTransmitSetting.field.BW  = BW_20;
-					else if (Channel >= 7)
-						pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_BELOW;
-					break;
-
-				case REGION_7_BG_BAND:  // 5 - 13
-					if (Channel <= 8)
-						pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_ABOVE;
-					else if (Channel >= 10)
-						pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_BELOW;
-					break;
-
-				default:	// Error. should never happen
-					break;
-			}
-#endif
 		}
 	}
 
@@ -1273,8 +1229,6 @@ static inline VOID N_SetCenCh(
 		pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel;
 	}
 }
-#endif // DOT11_N_SUPPORT //
-
 
 static inline UINT8 GetCuntryMaxTxPwr(
 	IN PRTMP_ADAPTER pAd,
diff --git a/drivers/staging/rt2860/common/2860_rtmp_init.c b/drivers/staging/rt2860/common/2860_rtmp_init.c
index 546f304ec33..0bc0fb99d2e 100644
--- a/drivers/staging/rt2860/common/2860_rtmp_init.c
+++ b/drivers/staging/rt2860/common/2860_rtmp_init.c
@@ -173,9 +173,6 @@ NDIS_STATUS	RTMPAllocTxRxRingMemory(
 				pTxD->SDPtr0 = BufBasePaLow;
 				// advance to next ring descriptor address
 				pTxD->DMADONE = 1;
-#ifdef RT_BIG_ENDIAN
-				RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-#endif
 				RingBasePaLow += TXD_SIZE;
 				RingBaseVa = (PUCHAR) RingBaseVa + TXD_SIZE;
 
@@ -236,9 +233,6 @@ NDIS_STATUS	RTMPAllocTxRxRingMemory(
 			pTxD = (PTXD_STRUC) pAd->MgmtRing.Cell[index].AllocVa;
 			pTxD->DMADONE = 1;
 
-#ifdef RT_BIG_ENDIAN
-			RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-#endif
 			// no pre-allocated buffer required in MgmtRing for scatter-gather case
 		}
 		DBGPRINT(RT_DEBUG_TRACE, ("MGMT Ring: total %d entry allocated\n", index));
@@ -318,10 +312,6 @@ NDIS_STATUS	RTMPAllocTxRxRingMemory(
 			pRxD = (PRXD_STRUC) pAd->RxRing.Cell[index].AllocVa;
 			pRxD->SDP0 = RTMP_GetPhysicalAddressLow(pDmaBuf->AllocPa);
 			pRxD->DDONE = 0;
-
-#ifdef RT_BIG_ENDIAN
-			RTMPDescriptorEndianChange((PUCHAR)pRxD, TYPE_RXD);
-#endif
 		}
 
 		DBGPRINT(RT_DEBUG_TRACE, ("Rx Ring: total %d entry allocated\n", index));
@@ -821,10 +811,6 @@ PNDIS_PACKET GetPacketFromRxRing(
 	IN OUT	UINT32			*pRxPending)
 {
 	PRXD_STRUC				pRxD;
-#ifdef RT_BIG_ENDIAN
-	PRXD_STRUC				pDestRxD;
-	RXD_STRUC				RxD;
-#endif
 	PNDIS_PACKET			pRxPacket = NULL;
 	PNDIS_PACKET			pNewPacket;
 	PVOID					AllocVa;
@@ -853,15 +839,8 @@ PNDIS_PACKET GetPacketFromRxRing(
 
 	}
 
-#ifdef RT_BIG_ENDIAN
-	pDestRxD = (PRXD_STRUC) pAd->RxRing.Cell[pAd->RxRing.RxSwReadIdx].AllocVa;
-	RxD = *pDestRxD;
-	pRxD = &RxD;
-	RTMPDescriptorEndianChange((PUCHAR)pRxD, TYPE_RXD);
-#else
 	// Point to Rx indexed rx ring descriptor
 	pRxD = (PRXD_STRUC) pAd->RxRing.Cell[pAd->RxRing.RxSwReadIdx].AllocVa;
-#endif
 
 	if (pRxD->DDONE == 0)
 	{
@@ -904,10 +883,6 @@ PNDIS_PACKET GetPacketFromRxRing(
 	*pRxPending = *pRxPending - 1;
 
 	// update rx descriptor and kick rx
-#ifdef RT_BIG_ENDIAN
-	RTMPDescriptorEndianChange((PUCHAR)pRxD, TYPE_RXD);
-	WriteBackToDescriptor((PUCHAR)pDestRxD, (PUCHAR)pRxD, FALSE, TYPE_RXD);
-#endif
 	INC_RING_INDEX(pAd->RxRing.RxSwReadIdx, RX_RING_SIZE);
 
 	pAd->RxRing.RxCpuIdx = (pAd->RxRing.RxSwReadIdx == 0) ? (RX_RING_SIZE-1) : (pAd->RxRing.RxSwReadIdx-1);
diff --git a/drivers/staging/rt2860/common/action.c b/drivers/staging/rt2860/common/action.c
index d6f530fb857..a4d9fdc0736 100644
--- a/drivers/staging/rt2860/common/action.c
+++ b/drivers/staging/rt2860/common/action.c
@@ -72,17 +72,12 @@ VOID ActionStateMachineInit(
 	StateMachineSetAction(S, ACT_IDLE, MT2_PEER_QOS_CATE, (STATE_MACHINE_FUNC)PeerQOSAction);
 
 	StateMachineSetAction(S, ACT_IDLE, MT2_PEER_DLS_CATE, (STATE_MACHINE_FUNC)ReservedAction);
-#ifdef QOS_DLS_SUPPORT
-		StateMachineSetAction(S, ACT_IDLE, MT2_PEER_DLS_CATE, (STATE_MACHINE_FUNC)PeerDLSAction);
-#endif // QOS_DLS_SUPPORT //
 
-#ifdef DOT11_N_SUPPORT
 	StateMachineSetAction(S, ACT_IDLE, MT2_PEER_BA_CATE, (STATE_MACHINE_FUNC)PeerBAAction);
 	StateMachineSetAction(S, ACT_IDLE, MT2_PEER_HT_CATE, (STATE_MACHINE_FUNC)PeerHTAction);
 	StateMachineSetAction(S, ACT_IDLE, MT2_MLME_ADD_BA_CATE, (STATE_MACHINE_FUNC)MlmeADDBAAction);
 	StateMachineSetAction(S, ACT_IDLE, MT2_MLME_ORI_DELBA_CATE, (STATE_MACHINE_FUNC)MlmeDELBAAction);
 	StateMachineSetAction(S, ACT_IDLE, MT2_MLME_REC_DELBA_CATE, (STATE_MACHINE_FUNC)MlmeDELBAAction);
-#endif // DOT11_N_SUPPORT //
 
 	StateMachineSetAction(S, ACT_IDLE, MT2_PEER_PUBLIC_CATE, (STATE_MACHINE_FUNC)PeerPublicAction);
 	StateMachineSetAction(S, ACT_IDLE, MT2_PEER_RM_CATE, (STATE_MACHINE_FUNC)PeerRMAction);
@@ -92,7 +87,6 @@ VOID ActionStateMachineInit(
 	StateMachineSetAction(S, ACT_IDLE, MT2_ACT_INVALID, (STATE_MACHINE_FUNC)MlmeInvalidAction);
 }
 
-#ifdef DOT11_N_SUPPORT
 VOID MlmeADDBAAction(
     IN PRTMP_ADAPTER pAd,
     IN MLME_QUEUE_ELEM *Elem)
@@ -131,21 +125,12 @@ VOID MlmeADDBAAction(
 			pBAEntry =&pAd->BATable.BAOriEntry[Idx];
 		}
 
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			if (ADHOC_ON(pAd))
 				ActHeaderInit(pAd, &Frame.Hdr, pInfo->pAddr, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
 			else
-#ifdef QOS_DLS_SUPPORT
-			if (pAd->MacTab.Content[pInfo->Wcid].ValidAsDls)
-				ActHeaderInit(pAd, &Frame.Hdr, pInfo->pAddr, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
-			else
-#endif // QOS_DLS_SUPPORT //
 				ActHeaderInit(pAd, &Frame.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pInfo->pAddr);
-
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 		Frame.Category = CATEGORY_BA;
 		Frame.Action = ADDBA_REQ;
@@ -220,10 +205,8 @@ VOID MlmeDELBAAction(
 
 		// SEND BAR (Send BAR to refresh peer reordering buffer.)
 		Idx = pAd->MacTab.Content[pInfo->Wcid].BAOriWcidArray[pInfo->TID];
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			BarHeaderInit(pAd, &FrameBar, pAd->MacTab.Content[pInfo->Wcid].Addr, pAd->CurrentAddress);
-#endif // CONFIG_STA_SUPPORT //
+
+		BarHeaderInit(pAd, &FrameBar, pAd->MacTab.Content[pInfo->Wcid].Addr, pAd->CurrentAddress);
 
 		FrameBar.StartingSeq.field.FragNum = 0; // make sure sequence not clear in DEL funciton.
 		FrameBar.StartingSeq.field.StartSeq = pAd->MacTab.Content[pInfo->Wcid].TxSeq[pInfo->TID]; // make sure sequence not clear in DEL funciton.
@@ -241,20 +224,14 @@ VOID MlmeDELBAAction(
 
 		// SEND DELBA FRAME
 		FrameLen = 0;
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+
 		{
 			if (ADHOC_ON(pAd))
 				ActHeaderInit(pAd, &Frame.Hdr, pAd->MacTab.Content[pInfo->Wcid].Addr, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
 			else
-#ifdef QOS_DLS_SUPPORT
-			if (pAd->MacTab.Content[pInfo->Wcid].ValidAsDls)
-				ActHeaderInit(pAd, &Frame.Hdr, pAd->MacTab.Content[pInfo->Wcid].Addr, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
-			else
-#endif // QOS_DLS_SUPPORT //
 				ActHeaderInit(pAd, &Frame.Hdr,  pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->MacTab.Content[pInfo->Wcid].Addr);
 		}
-#endif // CONFIG_STA_SUPPORT //
+
 		Frame.Category = CATEGORY_BA;
 		Frame.Action = DELBA;
 		Frame.DelbaParm.Initiator = pInfo->Initiator;
@@ -271,7 +248,6 @@ VOID MlmeDELBAAction(
 		DBGPRINT(RT_DEBUG_TRACE, ("BA - MlmeDELBAAction() . 3 DELBA sent. Initiator(%d)\n", pInfo->Initiator));
     	}
 }
-#endif // DOT11_N_SUPPORT //
 
 VOID MlmeQOSAction(
     IN PRTMP_ADAPTER pAd,
@@ -299,40 +275,6 @@ VOID PeerQOSAction(
 {
 }
 
-#ifdef QOS_DLS_SUPPORT
-VOID PeerDLSAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR	Action = Elem->Msg[LENGTH_802_11+1];
-
-	switch(Action)
-	{
-		case ACTION_DLS_REQUEST:
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			PeerDlsReqAction(pAd, Elem);
-#endif // CONFIG_STA_SUPPORT //
-			break;
-
-		case ACTION_DLS_RESPONSE:
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			PeerDlsRspAction(pAd, Elem);
-#endif // CONFIG_STA_SUPPORT //
-			break;
-
-		case ACTION_DLS_TEARDOWN:
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			PeerDlsTearDownAction(pAd, Elem);
-#endif // CONFIG_STA_SUPPORT //
-			break;
-	}
-}
-#endif // QOS_DLS_SUPPORT //
-
-#ifdef DOT11_N_SUPPORT
 VOID PeerBAAction(
 	IN PRTMP_ADAPTER pAd,
 	IN MLME_QUEUE_ELEM *Elem)
@@ -353,320 +295,12 @@ VOID PeerBAAction(
 	}
 }
 
-
-#ifdef DOT11N_DRAFT3
-
-#ifdef CONFIG_STA_SUPPORT
-VOID StaPublicAction(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR Bss2040Coexist)
-{
-	BSS_2040_COEXIST_IE		BssCoexist;
-	MLME_SCAN_REQ_STRUCT			ScanReq;
-
-	BssCoexist.word = Bss2040Coexist;
-	// AP asks Station to return a 20/40 BSS Coexistence mgmt frame.  So we first starts a scan, then send back 20/40 BSS Coexistence mgmt frame
-	if ((BssCoexist.field.InfoReq == 1) && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_SCAN_2040)))
-	{
-		// Clear record first.  After scan , will update those bit and send back to transmiter.
-		pAd->CommonCfg.BSSCoexist2040.field.InfoReq = 1;
-		pAd->CommonCfg.BSSCoexist2040.field.Intolerant40 = 0;
-		pAd->CommonCfg.BSSCoexist2040.field.BSS20WidthReq = 0;
-		// Fill out stuff for scan request
-		ScanParmFill(pAd, &ScanReq, ZeroSsid, 0, BSS_ANY, SCAN_2040_BSS_COEXIST);
-		MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_SCAN_REQ, sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq);
-		pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_LIST_SCAN;
-	}
-}
-
-
-/*
-Description : Build Intolerant Channel Rerpot from Trigger event table.
-return : how many bytes copied.
-*/
-ULONG BuildIntolerantChannelRep(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    PUCHAR  pDest)
-{
-	ULONG			FrameLen = 0;
-	ULONG			ReadOffset = 0;
-	UCHAR			i;
-	UCHAR			LastRegClass = 0xff;
-	PUCHAR			pLen;
-
-	for ( i = 0;i < MAX_TRIGGER_EVENT;i++)
-	{
-		if (pAd->CommonCfg.TriggerEventTab.EventA[i].bValid == TRUE)
-		{
-			if (pAd->CommonCfg.TriggerEventTab.EventA[i].RegClass == LastRegClass)
-			{
-				*(pDest + ReadOffset) = (UCHAR)pAd->CommonCfg.TriggerEventTab.EventA[i].Channel;
-				*pLen++;
-				ReadOffset++;
-				FrameLen++;
-			}
-			else
-			{
-				*(pDest + ReadOffset) = IE_2040_BSS_INTOLERANT_REPORT;  // IE
-				*(pDest + ReadOffset + 1) = 2;	// Len = RegClass byte + channel byte.
-				pLen = pDest + ReadOffset + 1;
-				LastRegClass = pAd->CommonCfg.TriggerEventTab.EventA[i].RegClass;
-				*(pDest + ReadOffset + 2) = LastRegClass;	// Len = RegClass byte + channel byte.
-				*(pDest + ReadOffset + 3) = (UCHAR)pAd->CommonCfg.TriggerEventTab.EventA[i].Channel;
-				FrameLen += 4;
-				ReadOffset += 4;
-			}
-
-		}
-	}
-	return FrameLen;
-}
-
-
-/*
-Description : Send 20/40 BSS Coexistence Action frame If one trigger event is triggered.
-*/
-VOID Send2040CoexistAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    UCHAR  Wcid,
-	IN	BOOLEAN	bAddIntolerantCha)
-{
-	PUCHAR			pOutBuffer = NULL;
-	NDIS_STATUS 	NStatus;
-	FRAME_ACTION_HDR	Frame;
-	ULONG			FrameLen;
-	ULONG			IntolerantChaRepLen;
-
-	IntolerantChaRepLen = 0;
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-	if(NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("ACT - Send2040CoexistAction() allocate memory failed \n"));
-		return;
-	}
-	ActHeaderInit(pAd, &Frame.Hdr, pAd->MacTab.Content[Wcid].Addr, pAd->CommonCfg.Bssid);
-	Frame.Category = CATEGORY_PUBLIC;
-	Frame.Action = ACTION_BSS_2040_COEXIST;
-
-	MakeOutgoingFrame(pOutBuffer,				&FrameLen,
-				  sizeof(FRAME_ACTION_HDR),	  &Frame,
-				  END_OF_ARGS);
-
-	*(pOutBuffer + FrameLen) = pAd->CommonCfg.BSSCoexist2040.word;
-	FrameLen++;
-
-	if (bAddIntolerantCha == TRUE)
-		IntolerantChaRepLen = BuildIntolerantChannelRep(pAd, pOutBuffer + FrameLen);
-
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen + IntolerantChaRepLen);
-	DBGPRINT(RT_DEBUG_ERROR,("ACT - Send2040CoexistAction( BSSCoexist2040 = 0x%x )  \n", pAd->CommonCfg.BSSCoexist2040.word));
-
-}
-
-
-/*
-	==========================================================================
-	Description:
-	After scan, Update 20/40 BSS Coexistence IE and send out.
-	According to 802.11n D3.03 11.14.10
-
-	Parameters:
-	==========================================================================
- */
-VOID Update2040CoexistFrameAndNotify(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    UCHAR  Wcid,
-	IN	BOOLEAN	bAddIntolerantCha)
-{
-	BSS_2040_COEXIST_IE	OldValue;
-
-	OldValue.word = pAd->CommonCfg.BSSCoexist2040.word;
-	if ((pAd->CommonCfg.TriggerEventTab.EventANo > 0) || (pAd->CommonCfg.TriggerEventTab.EventBCountDown > 0))
-		pAd->CommonCfg.BSSCoexist2040.field.BSS20WidthReq = 1;
-
-	// Need to check !!!!
-	// How STA will set Intolerant40 if implementation dependent. Now we don't set this bit first.!!!!!
-	// So Only check BSS20WidthReq change.
-	if (OldValue.field.BSS20WidthReq != pAd->CommonCfg.BSSCoexist2040.field.BSS20WidthReq)
-	{
-		Send2040CoexistAction(pAd, Wcid, bAddIntolerantCha);
-	}
-}
-#endif // CONFIG_STA_SUPPORT //
-
-
-BOOLEAN ChannelSwitchSanityCheck(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    UCHAR  Wcid,
-	IN    UCHAR  NewChannel,
-	IN    UCHAR  Secondary)
-{
-	UCHAR		i;
-
-	if (Wcid >= MAX_LEN_OF_MAC_TABLE)
-		return FALSE;
-
-	if ((NewChannel > 7) && (Secondary == 1))
-		return FALSE;
-
-	if ((NewChannel < 5) && (Secondary == 3))
-		return FALSE;
-
-	// 0. Check if new channel is in the channellist.
-	for (i = 0;i < pAd->ChannelListNum;i++)
-	{
-		if (pAd->ChannelList[i].Channel == NewChannel)
-		{
-			break;
-		}
-	}
-
-	if (i == pAd->ChannelListNum)
-		return FALSE;
-
-	return TRUE;
-}
-
-
-VOID ChannelSwitchAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    UCHAR  Wcid,
-	IN    UCHAR  NewChannel,
-	IN    UCHAR  Secondary)
-{
-	UCHAR		BBPValue = 0;
-	ULONG		MACValue;
-
-	DBGPRINT(RT_DEBUG_TRACE,("SPECTRUM - ChannelSwitchAction(NewChannel = %d , Secondary = %d)  \n", NewChannel, Secondary));
-
-	if (ChannelSwitchSanityCheck(pAd, Wcid, NewChannel, Secondary) == FALSE)
-		return;
-
-	// 1.  Switches to BW = 20.
-	if (Secondary == 0)
-	{
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
-		BBPValue&= (~0x18);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
-		if (pAd->MACVersion == 0x28600100)
-		{
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x16);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x08);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x11);
-			DBGPRINT(RT_DEBUG_TRACE, ("!!!rt2860C !!! \n" ));
-		}
-		pAd->CommonCfg.BBPCurrentBW = BW_20;
-		pAd->CommonCfg.Channel = NewChannel;
-		pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel;
-		AsicSwitchChannel(pAd, pAd->CommonCfg.Channel,FALSE);
-		AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-		pAd->MacTab.Content[Wcid].HTPhyMode.field.BW = 0;
-		DBGPRINT(RT_DEBUG_TRACE, ("!!!20MHz   !!! \n" ));
-	}
-	// 1.  Switches to BW = 40 And Station supports BW = 40.
-	else if (((Secondary == 1) || (Secondary == 3)) && (pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth == 1))
-	{
-		pAd->CommonCfg.Channel = NewChannel;
-
-		if (Secondary == 1)
-		{
-			// Secondary above.
-			pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel + 2;
-			RTMP_IO_READ32(pAd, TX_BAND_CFG, &MACValue);
-			MACValue &= 0xfe;
-			RTMP_IO_WRITE32(pAd, TX_BAND_CFG, MACValue);
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
-			BBPValue&= (~0x18);
-			BBPValue|= (0x10);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPValue);
-			BBPValue&= (~0x20);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPValue);
-			DBGPRINT(RT_DEBUG_TRACE, ("!!!40MHz Lower LINK UP !!! Control Channel at Below. Central = %d \n", pAd->CommonCfg.CentralChannel ));
-		}
-		else
-		{
-			// Secondary below.
-			pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel - 2;
-			RTMP_IO_READ32(pAd, TX_BAND_CFG, &MACValue);
-			MACValue &= 0xfe;
-			MACValue |= 0x1;
-			RTMP_IO_WRITE32(pAd, TX_BAND_CFG, MACValue);
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
-			BBPValue&= (~0x18);
-			BBPValue|= (0x10);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPValue);
-			BBPValue&= (~0x20);
-			BBPValue|= (0x20);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPValue);
-			DBGPRINT(RT_DEBUG_TRACE, ("!!!40MHz Upper LINK UP !!! Control Channel at UpperCentral = %d \n", pAd->CommonCfg.CentralChannel ));
-		}
-		pAd->CommonCfg.BBPCurrentBW = BW_40;
-		AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
-		AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
-		pAd->MacTab.Content[Wcid].HTPhyMode.field.BW = 1;
-	}
-}
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
-
 VOID PeerPublicAction(
 	IN PRTMP_ADAPTER pAd,
 	IN MLME_QUEUE_ELEM *Elem)
 {
-#ifdef DOT11N_DRAFT3
-	UCHAR	Action = Elem->Msg[LENGTH_802_11+1];
-#endif // DOT11N_DRAFT3 //
-
 	if (Elem->Wcid >= MAX_LEN_OF_MAC_TABLE)
 		return;
-
-#ifdef DOT11N_DRAFT3
-	switch(Action)
-	{
-		case ACTION_BSS_2040_COEXIST:	// Format defined in IEEE 7.4.7a.1 in 11n Draf3.03
-			{
-				//UCHAR	BssCoexist;
-				BSS_2040_COEXIST_ELEMENT		*pCoexistInfo;
-				BSS_2040_COEXIST_IE 			*pBssCoexistIe;
-				BSS_2040_INTOLERANT_CH_REPORT	*pIntolerantReport = NULL;
-
-				if (Elem->MsgLen <= (LENGTH_802_11 + sizeof(BSS_2040_COEXIST_ELEMENT)) )
-				{
-					DBGPRINT(RT_DEBUG_ERROR, ("ACTION - 20/40 BSS Coexistence Management Frame length too short! len = %ld!\n", Elem->MsgLen));
-					break;
-				}
-				DBGPRINT(RT_DEBUG_TRACE, ("ACTION - 20/40 BSS Coexistence Management action----> \n"));
-				hex_dump("CoexistenceMgmtFrame", Elem->Msg, Elem->MsgLen);
-
-
-				pCoexistInfo = (BSS_2040_COEXIST_ELEMENT *) &Elem->Msg[LENGTH_802_11+2];
-				//hex_dump("CoexistInfo", (PUCHAR)pCoexistInfo, sizeof(BSS_2040_COEXIST_ELEMENT));
-				if (Elem->MsgLen >= (LENGTH_802_11 + sizeof(BSS_2040_COEXIST_ELEMENT) + sizeof(BSS_2040_INTOLERANT_CH_REPORT)))
-				{
-					pIntolerantReport = (BSS_2040_INTOLERANT_CH_REPORT *)((PUCHAR)pCoexistInfo + sizeof(BSS_2040_COEXIST_ELEMENT));
-				}
-				//hex_dump("IntolerantReport ", (PUCHAR)pIntolerantReport, sizeof(BSS_2040_INTOLERANT_CH_REPORT));
-
-				pBssCoexistIe = (BSS_2040_COEXIST_IE *)(&pCoexistInfo->BssCoexistIe);
-
-#ifdef CONFIG_STA_SUPPORT
-				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				{
-					if (INFRA_ON(pAd))
-					{
-						StaPublicAction(pAd, pCoexistInfo);
-					}
-				}
-#endif // CONFIG_STA_SUPPORT //
-
-			}
-			break;
-	}
-
-#endif // DOT11N_DRAFT3 //
-
 }
 
 
@@ -694,7 +328,6 @@ VOID PeerRMAction(
 	return;
 }
 
-#ifdef DOT11_N_SUPPORT
 static VOID respond_ht_information_exchange_action(
 	IN PRTMP_ADAPTER pAd,
 	IN MLME_QUEUE_ELEM *Elem)
@@ -721,15 +354,12 @@ static VOID respond_ht_information_exchange_action(
 
 	NdisZeroMemory(&HTINFOframe, sizeof(FRAME_HT_INFO));
 	// 2-1. Prepare ADDBA Response frame.
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (ADHOC_ON(pAd))
 			ActHeaderInit(pAd, &HTINFOframe.Hdr, pAddr, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
 		else
 			ActHeaderInit(pAd, &HTINFOframe.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAddr);
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	HTINFOframe.Category = CATEGORY_HT;
 	HTINFOframe.Action = HT_INFO_EXCHANGE;
@@ -745,51 +375,6 @@ static VOID respond_ht_information_exchange_action(
 	MlmeFreeMemory(pAd, pOutBuffer);
 }
 
-
-#ifdef DOT11N_DRAFT3
-VOID SendNotifyBWActionFrame(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR  Wcid,
-	IN UCHAR apidx)
-{
-	PUCHAR			pOutBuffer = NULL;
-	NDIS_STATUS 	NStatus;
-	FRAME_ACTION_HDR	Frame;
-	ULONG			FrameLen;
-	PUCHAR			pAddr1;
-
-
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-	if(NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("ACT - SendNotifyBWAction() allocate memory failed \n"));
-		return;
-	}
-
-	if (Wcid == MCAST_WCID)
-		pAddr1 = &BROADCAST_ADDR[0];
-	else
-		pAddr1 = pAd->MacTab.Content[Wcid].Addr;
-	ActHeaderInit(pAd, &Frame.Hdr, pAddr1, pAd->ApCfg.MBSSID[apidx].Bssid, pAd->ApCfg.MBSSID[apidx].Bssid);
-
-	Frame.Category = CATEGORY_HT;
-	Frame.Action = NOTIFY_BW_ACTION;
-
-	MakeOutgoingFrame(pOutBuffer,				&FrameLen,
-				  sizeof(FRAME_ACTION_HDR),	  &Frame,
-				  END_OF_ARGS);
-
-	*(pOutBuffer + FrameLen) = pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth;
-	FrameLen++;
-
-
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-	DBGPRINT(RT_DEBUG_TRACE,("ACT - SendNotifyBWAction(NotifyBW= %d)!\n", pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth));
-
-}
-#endif // DOT11N_DRAFT3 //
-
-
 VOID PeerHTAction(
 	IN PRTMP_ADAPTER pAd,
 	IN MLME_QUEUE_ELEM *Elem)
@@ -803,7 +388,7 @@ VOID PeerHTAction(
 	{
 		case NOTIFY_BW_ACTION:
 			DBGPRINT(RT_DEBUG_TRACE,("ACTION - HT Notify Channel bandwidth action----> \n"));
-#ifdef CONFIG_STA_SUPPORT
+
 			if(pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE)
 			{
 				// Note, this is to patch DIR-1353 AP. When the AP set to Wep, it will use legacy mode. But AP still keeps
@@ -813,7 +398,6 @@ VOID PeerHTAction(
 								Elem->Msg[LENGTH_802_11+2] ));
 				break;
 			}
-#endif // CONFIG_STA_SUPPORT //
 
 			if (Elem->Msg[LENGTH_802_11+2] == 0)	// 7.4.8.2. if value is 1, keep the same as supported channel bandwidth.
 				pAd->MacTab.Content[Elem->Wcid].HTPhyMode.field.BW = 0;
@@ -881,11 +465,6 @@ VOID ORIBATimerTimeout(
 	INT			i, total;
 	UCHAR			TID;
 
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
 	total = pAd->MacTab.Size * NUM_OF_TID;
 
 	for (i = 1; ((i <MAX_LEN_OF_BA_ORI_TABLE) && (total > 0)) ; i++)
@@ -938,10 +517,8 @@ VOID SendRefreshBAR(
 			}
 
 			Sequence = pEntry->TxSeq[TID];
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				BarHeaderInit(pAd, &FrameBar, pEntry->Addr, pAd->CurrentAddress);
-#endif // CONFIG_STA_SUPPORT //
+
+			BarHeaderInit(pAd, &FrameBar, pEntry->Addr, pAd->CurrentAddress);
 
 			FrameBar.StartingSeq.field.FragNum = 0; // make sure sequence not clear in DEL function.
 			FrameBar.StartingSeq.field.StartSeq = Sequence; // make sure sequence not clear in DEL funciton.
@@ -950,15 +527,20 @@ VOID SendRefreshBAR(
 			MakeOutgoingFrame(pOutBuffer,				&FrameLen,
 							  sizeof(FRAME_BAR),	  &FrameBar,
 							  END_OF_ARGS);
+
 			if (1)	// Now we always send BAR.
 			{
+#ifndef RT30xx
 				MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
+#endif
+#ifdef RT30xx
+				MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
+#endif
 			}
 			MlmeFreeMemory(pAd, pOutBuffer);
 		}
 	}
 }
-#endif // DOT11_N_SUPPORT //
 
 VOID ActHeaderInit(
     IN	PRTMP_ADAPTER	pAd,
diff --git a/drivers/staging/rt2860/common/action.h b/drivers/staging/rt2860/common/action.h
index ce3877dce81..cfc2a5f8d1a 100644
--- a/drivers/staging/rt2860/common/action.h
+++ b/drivers/staging/rt2860/common/action.h
@@ -41,17 +41,10 @@
 
 typedef struct PACKED __HT_INFO_OCTET
 {
-#ifdef RT_BIG_ENDIAN
-	UCHAR	Reserved:5;
-	UCHAR 	STA_Channel_Width:1;
-	UCHAR	Forty_MHz_Intolerant:1;
-	UCHAR	Request:1;
-#else
 	UCHAR	Request:1;
 	UCHAR	Forty_MHz_Intolerant:1;
 	UCHAR 	STA_Channel_Width:1;
 	UCHAR	Reserved:5;
-#endif
 } HT_INFORMATION_OCTET;
 
 
diff --git a/drivers/staging/rt2860/common/ba_action.c b/drivers/staging/rt2860/common/ba_action.c
index 591d1e2158d..b95a341caac 100644
--- a/drivers/staging/rt2860/common/ba_action.c
+++ b/drivers/staging/rt2860/common/ba_action.c
@@ -25,8 +25,6 @@
  *************************************************************************
  */
 
-#ifdef DOT11_N_SUPPORT
-
 #include "../rt_config.h"
 
 
@@ -132,10 +130,7 @@ void Announce_Reordering_Packet(IN PRTMP_ADAPTER			pAd,
 		// pass this 802.3 packet to upper layer or forward this packet to WM directly
 		//
 
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pPacket, RTMP_GET_PACKET_IF(pPacket));
-#endif // CONFIG_STA_SUPPORT //
+		ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pPacket, RTMP_GET_PACKET_IF(pPacket));
 	}
 }
 
@@ -449,9 +444,6 @@ void ba_flush_reordering_timeout_mpdus(
 		&& (pBAEntry->list.qlen > 0)
 	   )
 		{
-//		printk("timeout[%d] (%lx-%lx = %d > %d): %x, ", pBAEntry->list.qlen, Now32, (pBAEntry->LastIndSeqAtTimer),
-//			   (int)((long) Now32 - (long)(pBAEntry->LastIndSeqAtTimer)), REORDERING_PACKET_TIMEOUT,
-//			   pBAEntry->LastIndSeq);
     		//
 		// force LastIndSeq to shift to LastIndSeq+1
     		//
@@ -468,22 +460,7 @@ void ba_flush_reordering_timeout_mpdus(
     			pBAEntry->LastIndSeq = Sequence;
     		}
 
-		//printk("%x, flush one!\n", pBAEntry->LastIndSeq);
-
 	}
-#if 0
-	else if (
-			 (RTMP_TIME_AFTER((unsigned long)Now32, (unsigned long)(pBAEntry->LastIndSeqAtTimer+(MAX_REORDERING_PACKET_TIMEOUT))) &&
-			  (pBAEntry->list.qlen > 1))
-			)
-		{
-		DBGPRINT(RT_DEBUG_TRACE,("timeout[%d] (%lx-%lx = %d > %d): %x\n ", pBAEntry->list.qlen, Now32, (pBAEntry->LastIndSeqAtTimer),
-			   (int)((long) Now32 - (long)(pBAEntry->LastIndSeqAtTimer)), MAX_REORDERING_PACKET_TIMEOUT,
-			   pBAEntry->LastIndSeq));
-		ba_refresh_reordering_mpdus(pAd, pBAEntry);
-			pBAEntry->LastIndSeqAtTimer = Now32;
-				}
-#endif
 }
 
 
@@ -554,6 +531,13 @@ VOID BAOriSessionSetUp(
 	pBAEntry->TimeOutValue = TimeOut;
 	pBAEntry->pAdapter = pAd;
 
+#ifdef RT30xx
+	DBGPRINT(RT_DEBUG_TRACE,("Send AddBA to %02x:%02x:%02x:%02x:%02x:%02x Tid:%d isForced:%d Wcid:%d\n"
+		,pEntry->Addr[0],pEntry->Addr[1],pEntry->Addr[2]
+		,pEntry->Addr[3],pEntry->Addr[4],pEntry->Addr[5]
+		,TID,isForced,pEntry->Aid));
+#endif
+
 	if (!(pEntry->TXBAbitmap & (1<<TID)))
 	{
 		RTMPInitTimer(pAd, &pBAEntry->ORIBATimer, GET_TIMER_FUNCTION(BAOriSessionSetupTimeout), pBAEntry, FALSE);
@@ -610,11 +594,7 @@ VOID BAOriSessionAdd(
 			return;
 		}
 
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			BarHeaderInit(pAd, &FrameBar, pAd->MacTab.Content[pBAEntry->Wcid].Addr, pAd->CurrentAddress);
-#endif // CONFIG_STA_SUPPORT //
+		BarHeaderInit(pAd, &FrameBar, pAd->MacTab.Content[pBAEntry->Wcid].Addr, pAd->CurrentAddress);
 
 		FrameBar.StartingSeq.field.FragNum = 0;	// make sure sequence not clear in DEL function.
 		FrameBar.StartingSeq.field.StartSeq = pBAEntry->Sequence; // make sure sequence not clear in DEL funciton.
@@ -701,10 +681,6 @@ BOOLEAN BARecSessionAdd(
 			RTMPInitTimer(pAd, &pBAEntry->RECBATimer, GET_TIMER_FUNCTION(BARecSessionIdleTimeout), pBAEntry, TRUE);
 		}
 
-#if 0	// for debugging
-		RTMPSetTimer(&pBAEntry->RECBATimer, REC_BA_SESSION_IDLE_TIMEOUT);
-#endif
-
 		// Set Bitmap flag.
 		pEntry->RXBAbitmap |= (1<<TID);
 		pEntry->BARecWcidArray[TID] = Idx;
@@ -1083,20 +1059,9 @@ VOID BAOriSessionSetupTimeout(
 
 	pAd = pBAEntry->pAdapter;
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// Do nothing if monitor mode is on
-		if (MONITOR_ON(pAd))
-			return;
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef RALINK_ATE
-	// Nothing to do in ATE mode.
-	if (ATE_ON(pAd))
+	// Do nothing if monitor mode is on
+	if (MONITOR_ON(pAd))
 		return;
-#endif // RALINK_ATE //
 
 	pEntry = &pAd->MacTab.Content[pBAEntry->Wcid];
 
@@ -1113,8 +1078,16 @@ VOID BAOriSessionSetupTimeout(
 		AddbaReq.Token = pBAEntry->Token;
 		MlmeEnqueue(pAd, ACTION_STATE_MACHINE, MT2_MLME_ADD_BA_CATE, sizeof(MLME_ADDBA_REQ_STRUCT), (PVOID)&AddbaReq);
 		RT28XX_MLME_HANDLER(pAd);
+#ifndef RT30xx
 		DBGPRINT(RT_DEBUG_TRACE,("BA Ori Session Timeout(%d) : Send ADD BA again\n", pBAEntry->Token));
-
+#endif
+#ifdef RT30xx
+		DBGPRINT(RT_DEBUG_TRACE,("BA Ori Session Timeout(%d) to %02x:%02x:%02x:%02x:%02x:%02x Tid:%d Wcid:%d\n"
+		,pBAEntry->Token
+		,pEntry->Addr[0],pEntry->Addr[1],pEntry->Addr[2]
+		,pEntry->Addr[3],pEntry->Addr[4],pEntry->Addr[5]
+		,pBAEntry->TID,pEntry->Aid));
+#endif
 		pBAEntry->Token++;
 		RTMPSetTimer(&pBAEntry->ORIBATimer, ORI_BA_SESSION_TIMEOUT);
 	}
@@ -1229,21 +1202,15 @@ VOID PeerAddBAReqAction(
 	}
 
 	NdisZeroMemory(&ADDframe, sizeof(FRAME_ADDBA_RSP));
+
 	// 2-1. Prepare ADDBA Response frame.
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (ADHOC_ON(pAd))
 			ActHeaderInit(pAd, &ADDframe.Hdr, pAddr, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
 		else
-#ifdef QOS_DLS_SUPPORT
-		if (pAd->MacTab.Content[Elem->Wcid].ValidAsDls)
-			ActHeaderInit(pAd, &ADDframe.Hdr, pAddr, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
-		else
-#endif // QOS_DLS_SUPPORT //
 			ActHeaderInit(pAd, &ADDframe.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAddr);
 	}
-#endif // CONFIG_STA_SUPPORT //
+
 	ADDframe.Category = CATEGORY_BA;
 	ADDframe.Action = ADDBA_RESP;
 	ADDframe.Token = pAddreqFrame->Token;
@@ -1310,9 +1277,7 @@ VOID PeerAddBARspAction(
 		}
 		// Rcv Decline StatusCode
 		if ((pFrame->StatusCode == 37)
-#ifdef CONFIG_STA_SUPPORT
             || ((pAd->OpMode == OPMODE_STA) && STA_TGN_WIFI_ON(pAd) && (pFrame->StatusCode != 0))
-#endif // CONFIG_STA_SUPPORT //
             )
 		{
 			pAd->MacTab.Content[Elem->Wcid].BADeclineBitmap |= 1<<pFrame->BaParm.TID;
@@ -1426,6 +1391,10 @@ VOID SendPSMPAction(
 	//ULONG           Idx;
 	FRAME_PSMP_ACTION   Frame;
 	ULONG           FrameLen;
+#ifdef RT30xx
+	UCHAR			bbpdata=0;
+	UINT32			macdata;
+#endif // RT30xx //
 
 	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);	 //Get an unused nonpaged memory
 	if (NStatus != NDIS_STATUS_SUCCESS)
@@ -1433,22 +1402,62 @@ VOID SendPSMPAction(
 		DBGPRINT(RT_DEBUG_ERROR,("BA - MlmeADDBAAction() allocate memory failed \n"));
 		return;
 	}
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		ActHeaderInit(pAd, &Frame.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->MacTab.Content[Wcid].Addr);
-#endif // CONFIG_STA_SUPPORT //
+
+	ActHeaderInit(pAd, &Frame.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->MacTab.Content[Wcid].Addr);
 
 	Frame.Category = CATEGORY_HT;
 	Frame.Action = SMPS_ACTION;
 	switch (Psmp)
 	{
 		case MMPS_ENABLE:
+#ifdef RT30xx
+			if (IS_RT3090(pAd))
+			{
+				// disable MMPS BBP control register
+				RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &bbpdata);
+				bbpdata &= ~(0x04);	//bit 2
+				RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, bbpdata);
+
+				// disable MMPS MAC control register
+				RTMP_IO_READ32(pAd, 0x1210, &macdata);
+				macdata &= ~(0x09);	//bit 0, 3
+				RTMP_IO_WRITE32(pAd, 0x1210, macdata);
+			}
+#endif // RT30xx //
 			Frame.Psmp = 0;
 			break;
 		case MMPS_DYNAMIC:
+#ifdef RT30xx
+			if (IS_RT3090(pAd))
+			{
+				// enable MMPS BBP control register
+				RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &bbpdata);
+				bbpdata |= 0x04;	//bit 2
+				RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, bbpdata);
+
+				// enable MMPS MAC control register
+				RTMP_IO_READ32(pAd, 0x1210, &macdata);
+				macdata |= 0x09;	//bit 0, 3
+				RTMP_IO_WRITE32(pAd, 0x1210, macdata);
+			}
+#endif // RT30xx //
 			Frame.Psmp = 3;
 			break;
 		case MMPS_STATIC:
+#ifdef RT30xx
+			if (IS_RT3090(pAd))
+			{
+				// enable MMPS BBP control register
+				RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &bbpdata);
+				bbpdata |= 0x04;	//bit 2
+				RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, bbpdata);
+
+				// enable MMPS MAC control register
+				RTMP_IO_READ32(pAd, 0x1210, &macdata);
+				macdata |= 0x09;	//bit 0, 3
+				RTMP_IO_WRITE32(pAd, 0x1210, macdata);
+			}
+#endif // RT30xx //
 			Frame.Psmp = 1;
 			break;
 	}
@@ -1501,10 +1510,7 @@ void convert_reordering_packet_to_preAMSDU_or_802_3_packet(
 	// 		a. pointer pRxBlk->pData to payload
 	//      b. modify pRxBlk->DataSize
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
-#endif // CONFIG_STA_SUPPORT //
+	RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
 
 	ASSERT(pRxBlk->pRxPacket);
 	pRxPkt = RTPKT_TO_OSPKT(pRxBlk->pRxPacket);
@@ -1519,18 +1525,9 @@ void convert_reordering_packet_to_preAMSDU_or_802_3_packet(
 	//
 	if (!RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU))
 	{
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
 #ifdef LINUX
-			NdisMoveMemory(skb_push(pRxPkt, LENGTH_802_3), Header802_3, LENGTH_802_3);
-#endif
-#ifdef UCOS
-			NdisMoveMemory(net_pkt_push(pRxPkt, LENGTH_802_3), Header802_3, LENGTH_802_3);
+		NdisMoveMemory(skb_push(pRxPkt, LENGTH_802_3), Header802_3, LENGTH_802_3);
 #endif
-		}
-#endif // CONFIG_STA_SUPPORT //
 	}
 }
 
@@ -1598,13 +1595,9 @@ static VOID ba_enqueue_reordering_packet(
 	}
 	else
 	{
-#if 0
-		DBGPRINT(RT_DEBUG_ERROR,  ("!!! (%d:%d) Can't allocate reordering mpdu blk\n",
-								   blk_count, pBAEntry->list.qlen));
-#else
 		DBGPRINT(RT_DEBUG_ERROR,  ("!!! (%d) Can't allocate reordering mpdu blk\n",
 								   pBAEntry->list.qlen));
-#endif
+
 		/*
 		 * flush all pending reordering mpdus
 		 * and receving mpdu to upper layer
@@ -1652,29 +1645,11 @@ VOID Indicate_AMPDU_Packet(
 
 	if (!RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU) &&  (pRxBlk->DataSize > MAX_RX_PKT_LEN))
 	{
-#if 0 // sample take off, no use
-		static int err_size;
-
-		err_size++;
-		if (err_size > 20) {
-			 printk("AMPDU DataSize = %d\n", pRxBlk->DataSize);
-			 hex_dump("802.11 Header", (UCHAR *)pRxBlk->pHeader, 24);
-			 hex_dump("Payload", pRxBlk->pData, 64);
-			 err_size = 0;
-		}
-#endif
 		// release packet
 		RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
 		return;
 	}
 
-
-#if 0 // test
-	/* Rec BA Session had been torn down */
-	INDICATE_LEGACY_OR_AMSDU(pAd, pRxBlk, FromWhichBSSID);
-	return;
-#endif
-
 	if (Wcid < MAX_LEN_OF_MAC_TABLE)
 	{
 		Idx = pAd->MacTab.Content[Wcid].BARecWcidArray[TID];
@@ -1769,10 +1744,6 @@ VOID Indicate_AMPDU_Packet(
 	//
 	else
 	{
-#if 0
-		ba_refresh_reordering_mpdus(pAd, pBAEntry);
-		INDICATE_LEGACY_OR_AMSDU(pAd, pRxBlk, FromWhichBSSID);
-#else
 		LONG WinStartSeq, TmpSeq;
 
 
@@ -1794,9 +1765,5 @@ VOID Indicate_AMPDU_Packet(
 		{
 			pBAEntry->LastIndSeq = TmpSeq;
 		}
-#endif
 	}
 }
-
-#endif // DOT11_N_SUPPORT //
-
diff --git a/drivers/staging/rt2860/common/cmm_data.c b/drivers/staging/rt2860/common/cmm_data.c
index b3f88f52af7..66eca202eae 100644
--- a/drivers/staging/rt2860/common/cmm_data.c
+++ b/drivers/staging/rt2860/common/cmm_data.c
@@ -105,7 +105,9 @@ NDIS_STATUS MiniportMMRequest(
 	PNDIS_PACKET	pPacket;
 	NDIS_STATUS  	Status = NDIS_STATUS_SUCCESS;
 	ULONG	 		FreeNum;
+#ifdef RT2860
 	unsigned long	IrqFlags = 0;
+#endif
 	UCHAR			IrqState;
 	UCHAR			rtmpHwHdr[TXINFO_SIZE + TXWI_SIZE]; //RTMP_HW_HDR_LEN];
 
@@ -117,9 +119,10 @@ NDIS_STATUS MiniportMMRequest(
 
 	IrqState = pAd->irq_disabled;
 
+#ifdef RT2860
 	if ((pAd->MACVersion == 0x28600100) && (!IrqState))
 		RTMP_IRQ_LOCK(&pAd->irq_lock, IrqFlags);
-
+#endif
 	do
 	{
 		// Reset is in progress, stop immediately
@@ -172,14 +175,15 @@ NDIS_STATUS MiniportMMRequest(
 
 	} while (FALSE);
 
+#ifdef RT2860
 	// 2860C use Tx Ring
 	if ((pAd->MACVersion == 0x28600100) && (!IrqState))
 		RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags);
-
+#endif
 	return Status;
 }
 
-
+#ifdef RT2860
 NDIS_STATUS MiniportMMRequestUnlock(
 	IN	PRTMP_ADAPTER	pAd,
 	IN	UCHAR			QueIdx,
@@ -247,7 +251,115 @@ NDIS_STATUS MiniportMMRequestUnlock(
 
 	return Status;
 }
+#endif
+#ifdef RT30xx
+NDIS_STATUS MlmeDataHardTransmit(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	UCHAR	QueIdx,
+	IN	PNDIS_PACKET	pPacket);
+
+#define MAX_DATAMM_RETRY	3
+/*
+	========================================================================
+
+	Routine Description:
+		API for MLME to transmit management frame to AP (BSS Mode)
+	or station (IBSS Mode)
+
+	Arguments:
+		pAd Pointer to our adapter
+		pData		Pointer to the outgoing 802.11 frame
+		Length		Size of outgoing management frame
+
+	Return Value:
+		NDIS_STATUS_FAILURE
+		NDIS_STATUS_PENDING
+		NDIS_STATUS_SUCCESS
+
+	IRQL = PASSIVE_LEVEL
+	IRQL = DISPATCH_LEVEL
+
+	Note:
+
+	========================================================================
+*/
+NDIS_STATUS MiniportDataMMRequest(
+							 IN  PRTMP_ADAPTER   pAd,
+							 IN  UCHAR           QueIdx,
+							 IN  PUCHAR          pData,
+							 IN  UINT            Length)
+{
+	PNDIS_PACKET    pPacket;
+	NDIS_STATUS  Status = NDIS_STATUS_SUCCESS;
+	ULONG    FreeNum;
+	int 	retry = 0;
+	UCHAR           IrqState;
+	UCHAR			rtmpHwHdr[TXINFO_SIZE + TXWI_SIZE]; //RTMP_HW_HDR_LEN];
+
+	ASSERT(Length <= MGMT_DMA_BUFFER_SIZE);
+
+	// 2860C use Tx Ring
+	IrqState = pAd->irq_disabled;
+
+	do
+	{
+		// Reset is in progress, stop immediately
+		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS) ||
+			 RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)||
+			!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP))
+		{
+			Status = NDIS_STATUS_FAILURE;
+			break;
+		}
+
+		// Check Free priority queue
+		// Since we use PBF Queue2 for management frame.  Its corresponding DMA ring should be using TxRing.
+
+		// 2860C use Tx Ring
+
+		// free Tx(QueIdx) resources
+		FreeNum = GET_TXRING_FREENO(pAd, QueIdx);
+
+		if ((FreeNum > 0))
+		{
+			// We need to reserve space for rtmp hardware header. i.e., TxWI for RT2860 and TxInfo+TxWI for RT2870
+			NdisZeroMemory(&rtmpHwHdr, (TXINFO_SIZE + TXWI_SIZE));
+			Status = RTMPAllocateNdisPacket(pAd, &pPacket, (PUCHAR)&rtmpHwHdr, (TXINFO_SIZE + TXWI_SIZE), pData, Length);
+			if (Status != NDIS_STATUS_SUCCESS)
+			{
+				DBGPRINT(RT_DEBUG_WARN, ("MiniportMMRequest (error:: can't allocate NDIS PACKET)\n"));
+				break;
+			}
+
+			//pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK;
+			//pAd->CommonCfg.MlmeRate = RATE_2;
+
+
+			Status = MlmeDataHardTransmit(pAd, QueIdx, pPacket);
+			if (Status != NDIS_STATUS_SUCCESS)
+				RTMPFreeNdisPacket(pAd, pPacket);
+			retry = MAX_DATAMM_RETRY;
+		}
+		else
+		{
+			retry ++;
+
+			printk("retry %d\n", retry);
+			pAd->RalinkCounters.MgmtRingFullCount++;
 
+			if (retry >= MAX_DATAMM_RETRY)
+			{
+				DBGPRINT(RT_DEBUG_ERROR, ("Qidx(%d), not enough space in DataRing, MgmtRingFullCount=%ld!\n",
+											QueIdx, pAd->RalinkCounters.MgmtRingFullCount));
+			}
+		}
+
+	} while (retry < MAX_DATAMM_RETRY);
+
+
+	return Status;
+}
+#endif /* RT30xx */
 
 /*
 	========================================================================
@@ -283,14 +395,16 @@ NDIS_STATUS MlmeHardTransmit(
 		return NDIS_STATUS_FAILURE;
 	}
 
+#ifdef RT2860
 	if ( pAd->MACVersion == 0x28600100 )
 		return MlmeHardTransmitTxRing(pAd,QueIdx,pPacket);
 	else
+#endif
 		return MlmeHardTransmitMgmtRing(pAd,QueIdx,pPacket);
 
 }
 
-
+#ifdef RT2860
 NDIS_STATUS MlmeHardTransmitTxRing(
 	IN	PRTMP_ADAPTER	pAd,
 	IN	UCHAR	QueIdx,
@@ -300,10 +414,6 @@ NDIS_STATUS MlmeHardTransmitTxRing(
 	PUCHAR			pSrcBufVA;
 	UINT			SrcBufLen;
 	PTXD_STRUC		pTxD;
-#ifdef RT_BIG_ENDIAN
-    PTXD_STRUC      pDestTxD;
-    TXD_STRUC       TxD;
-#endif
 	PHEADER_802_11	pHeader_802_11;
 	BOOLEAN 		bAckRequired, bInsertTimestamp;
 	ULONG			SrcBufPA;
@@ -335,14 +445,7 @@ NDIS_STATUS MlmeHardTransmitTxRing(
 
 	SwIdx = pAd->TxRing[QueIdx].TxCpuIdx;
 
-#ifndef RT_BIG_ENDIAN
 	pTxD  = (PTXD_STRUC) pAd->TxRing[QueIdx].Cell[SwIdx].AllocVa;
-#else
-    pDestTxD  = (PTXD_STRUC)pAd->TxRing[QueIdx].Cell[SwIdx].AllocVa;
-    TxD = *pDestTxD;
-    pTxD = &TxD;
-    RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-#endif
 
 	if (pAd->TxRing[QueIdx].Cell[SwIdx].pNdisPacket)
 	{
@@ -350,15 +453,10 @@ NDIS_STATUS MlmeHardTransmitTxRing(
 		return NDIS_STATUS_FAILURE;
 	}
 
+	// outgoing frame always wakeup PHY to prevent frame lost
+	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
+		AsicForceWakeup(pAd, FROM_TX);
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// outgoing frame always wakeup PHY to prevent frame lost
-		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
-			AsicForceWakeup(pAd, FROM_TX);
-	}
-#endif // CONFIG_STA_SUPPORT //
 	pFirstTxWI	=(PTXWI_STRUC)pSrcBufVA;
 
 	pHeader_802_11 = (PHEADER_802_11) (pSrcBufVA + TXWI_SIZE);
@@ -388,7 +486,7 @@ NDIS_STATUS MlmeHardTransmitTxRing(
 	//
 	//
 	// In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame
-#ifdef CONFIG_STA_SUPPORT
+
     // Data-Null packets alse pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD
 	if (pHeader_802_11->FC.Type != BTYPE_DATA)
     {
@@ -401,7 +499,6 @@ NDIS_STATUS MlmeHardTransmitTxRing(
     		pHeader_802_11->FC.PwrMgmt = pAd->CommonCfg.bAPSDForcePowerSave;
     	}
     }
-#endif // CONFIG_STA_SUPPORT //
 
 	bInsertTimestamp = FALSE;
 	if (pHeader_802_11->FC.Type == BTYPE_CNTL) // must be PS-POLL
@@ -438,9 +535,6 @@ NDIS_STATUS MlmeHardTransmitTxRing(
 		return (NDIS_STATUS_FAILURE);
 	}
 
-#ifdef RT_BIG_ENDIAN
-	RTMPFrameEndianChange(pAd, (PUCHAR)pHeader_802_11, DIR_WRITE, FALSE);
-#endif
 	//
 	// fill scatter-and-gather buffer list into TXD. Internally created NDIS PACKET
 	// should always has only one ohysical buffer, and the whole frame size equals
@@ -470,9 +564,7 @@ NDIS_STATUS MlmeHardTransmitTxRing(
 
 	pAd->TxRing[QueIdx].Cell[SwIdx].pNdisPacket = pPacket;
 	pAd->TxRing[QueIdx].Cell[SwIdx].pNextNdisPacket = NULL;
-#ifdef RT_BIG_ENDIAN
-	RTMPWIEndianChange((PUCHAR)pFirstTxWI, TYPE_TXWI);
-#endif
+
 	SrcBufPA = PCI_MAP_SINGLE(pAd, pSrcBufVA, SrcBufLen, 0, PCI_DMA_TODEVICE);
 
 
@@ -484,11 +576,6 @@ NDIS_STATUS MlmeHardTransmitTxRing(
 	pTxD->SDPtr0 = SrcBufPA;
 	pTxD->DMADONE = 0;
 
-#ifdef RT_BIG_ENDIAN
-    RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-    WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
-#endif
-
 	pAd->RalinkCounters.KickTxCount++;
 	pAd->RalinkCounters.OneSecTxDoneCount++;
 
@@ -499,7 +586,25 @@ NDIS_STATUS MlmeHardTransmitTxRing(
 
 	return NDIS_STATUS_SUCCESS;
 }
+#endif /* RT2860 */
 
+#ifdef RT30xx
+NDIS_STATUS MlmeDataHardTransmit(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	UCHAR	QueIdx,
+	IN	PNDIS_PACKET	pPacket)
+{
+	if ((pAd->CommonCfg.RadarDetect.RDMode != RD_NORMAL_MODE)
+		)
+	{
+		return NDIS_STATUS_FAILURE;
+	}
+
+#ifdef RT2870
+	return MlmeHardTransmitMgmtRing(pAd,QueIdx,pPacket);
+#endif // RT2870 //
+}
+#endif /* RT30xx */
 
 NDIS_STATUS MlmeHardTransmitMgmtRing(
 	IN	PRTMP_ADAPTER	pAd,
@@ -525,14 +630,14 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(
 		return NDIS_STATUS_FAILURE;
 	}
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// outgoing frame always wakeup PHY to prevent frame lost
-		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
-			AsicForceWakeup(pAd, FROM_TX);
-	}
-#endif // CONFIG_STA_SUPPORT //
+	// outgoing frame always wakeup PHY to prevent frame lost
+	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
+#ifdef RT2860
+		AsicForceWakeup(pAd, FROM_TX);
+#endif
+#ifdef RT2870
+		AsicForceWakeup(pAd, TRUE);
+#endif
 
 	pFirstTxWI = (PTXWI_STRUC)(pSrcBufVA +  TXINFO_SIZE);
 	pHeader_802_11 = (PHEADER_802_11) (pSrcBufVA + TXINFO_SIZE + TXWI_SIZE); //TXWI_SIZE);
@@ -556,14 +661,10 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(
 		pMacEntry = MacTableLookup(pAd, pHeader_802_11->Addr1);
 	}
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Fixed W52 with Activity scan issue in ABG_MIXED and ABGN_MIXED mode.
 		if (pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED
-#ifdef DOT11_N_SUPPORT
 			|| pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED
-#endif // DOT11_N_SUPPORT //
 		)
 		{
 			if (pAd->LatchRfRegs.Channel > 14)
@@ -572,7 +673,6 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(
 				pAd->CommonCfg.MlmeTransmit.field.MODE = 0;
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	//
 	// Should not be hard code to set PwrMgmt to 0 (PWR_ACTIVE)
@@ -582,7 +682,7 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(
 	// pHeader_802_11->FC.PwrMgmt = 0; // (pAd->StaCfg.Psm == PWR_SAVE);
 	//
 	// In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame
-#ifdef CONFIG_STA_SUPPORT
+
     // Data-Null packets alse pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD
 	if ((pHeader_802_11->FC.Type != BTYPE_DATA) && (pHeader_802_11->FC.Type != BTYPE_CNTL))
 	{
@@ -592,18 +692,15 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(
 		else
 			pHeader_802_11->FC.PwrMgmt = PWR_ACTIVE;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	bInsertTimestamp = FALSE;
 	if (pHeader_802_11->FC.Type == BTYPE_CNTL) // must be PS-POLL
 	{
-#ifdef CONFIG_STA_SUPPORT
 		//Set PM bit in ps-poll, to fix WLK 1.2  PowerSaveMode_ext failure issue.
 		if ((pAd->OpMode == OPMODE_STA) && (pHeader_802_11->FC.SubType == SUBTYPE_PS_POLL))
 		{
 			pHeader_802_11->FC.PwrMgmt = PWR_SAVE;
 		}
-#endif // CONFIG_STA_SUPPORT //
 		bAckRequired = FALSE;
 	}
 	else // BTYPE_MGMT or BTYPE_DATA(must be NULL frame)
@@ -639,10 +736,6 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(
 		return (NDIS_STATUS_FAILURE);
 	}
 
-#ifdef RT_BIG_ENDIAN
-	RTMPFrameEndianChange(pAd, (PUCHAR)pHeader_802_11, DIR_WRITE, FALSE);
-#endif
-
 	//
 	// fill scatter-and-gather buffer list into TXD. Internally created NDIS PACKET
 	// should always has only one ohysical buffer, and the whole frame size equals
@@ -669,10 +762,6 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(
 					IFS_BACKOFF, FALSE, &pMacEntry->MaxHTPhyMode);
 	}
 
-#ifdef RT_BIG_ENDIAN
-	RTMPWIEndianChange((PUCHAR)pFirstTxWI, TYPE_TXWI);
-#endif
-
 	// Now do hardware-depened kick out.
 	HAL_KickOutMgmtTx(pAd, QueIdx, pPacket, pSrcBufVA, SrcBufLen);
 
@@ -752,9 +841,7 @@ static UCHAR TxPktClassification(
 	UCHAR			TxFrameType = TX_UNKOWN_FRAME;
 	UCHAR			Wcid;
 	MAC_TABLE_ENTRY	*pMacEntry = NULL;
-#ifdef DOT11_N_SUPPORT
 	BOOLEAN			bHTRate = FALSE;
-#endif // DOT11_N_SUPPORT //
 
 	Wcid = RTMP_GET_PACKET_WCID(pPacket);
 	if (Wcid == MCAST_WCID)
@@ -768,7 +855,6 @@ static UCHAR TxPktClassification(
 	{	// It's a specific packet need to force low rate, i.e., bDHCPFrame, bEAPOLFrame, bWAIFrame
 		TxFrameType = TX_LEGACY_FRAME;
 	}
-#ifdef DOT11_N_SUPPORT
 	else if (IS_HT_RATE(pMacEntry))
 	{	// it's a 11n capable packet
 
@@ -788,7 +874,6 @@ static UCHAR TxPktClassification(
 		else
 			TxFrameType = TX_LEGACY_FRAME;
 	}
-#endif // DOT11_N_SUPPORT //
 	else
 	{	// it's a legacy b/g packet.
 		if ((CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_AGGREGATION_CAPABLE) && pAd->CommonCfg.bAggregationCapable) &&
@@ -874,16 +959,15 @@ BOOLEAN RTMP_FillTxBlkInfo(
 			TX_BLK_SET_FLAG(pTxBlk, fTX_bAckRequired);
 
 		{
-
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			{
-
-				// If support WMM, enable it.
-				if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED))
-					TX_BLK_SET_FLAG(pTxBlk, fTX_bWMM);
-			}
-#endif // CONFIG_STA_SUPPORT //
+			// If support WMM, enable it.
+#ifdef RT2860
+			if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED))
+#endif
+#ifdef RT2870
+			if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) &&
+				CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_WMM_CAPABLE))
+#endif
+				TX_BLK_SET_FLAG(pTxBlk, fTX_bWMM);
 		}
 
 		if (pTxBlk->TxFrameType == TX_LEGACY_FRAME)
@@ -892,7 +976,7 @@ BOOLEAN RTMP_FillTxBlkInfo(
                 ((pAd->OpMode == OPMODE_AP) && (pMacEntry->MaxHTPhyMode.field.MODE == MODE_CCK) && (pMacEntry->MaxHTPhyMode.field.MCS == RATE_1)))
 			{	// Specific packet, i.e., bDHCPFrame, bEAPOLFrame, bWAIFrame, need force low rate.
 				pTxBlk->pTransmit = &pAd->MacTab.Content[MCAST_WCID].HTPhyMode;
-#ifdef DOT11_N_SUPPORT
+
 				// Modify the WMM bit for ICV issue. If we have a packet with EOSP field need to set as 1, how to handle it???
 				if (IS_HT_STA(pTxBlk->pMacEntry) &&
 					(CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_RALINK_CHIPSET)) &&
@@ -901,16 +985,13 @@ BOOLEAN RTMP_FillTxBlkInfo(
 					TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bWMM);
 					TX_BLK_SET_FLAG(pTxBlk, fTX_bForceNonQoS);
 				}
-#endif // DOT11_N_SUPPORT //
 			}
 
-#ifdef DOT11_N_SUPPORT
 			if ( (IS_HT_RATE(pMacEntry) == FALSE) &&
 				(CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_PIGGYBACK_CAPABLE)))
 			{	// Currently piggy-back only support when peer is operate in b/g mode.
 				TX_BLK_SET_FLAG(pTxBlk, fTX_bPiggyBack);
 			}
-#endif // DOT11_N_SUPPORT //
 
 			if (RTMP_GET_PACKET_MOREDATA(pPacket))
 			{
@@ -932,6 +1013,11 @@ BOOLEAN RTMP_FillTxBlkInfo(
 	}
 
 	return TRUE;
+
+#ifdef RT30xx
+FillTxBlkErr:
+	return FALSE;
+#endif
 }
 
 
@@ -963,13 +1049,10 @@ BOOLEAN CanDoAggregateTransmit(
 		return FALSE;
 	}
 
-#ifdef CONFIG_STA_SUPPORT
 	if ((INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA)) // must be unicast to AP
 		return TRUE;
 	else
-#endif // CONFIG_STA_SUPPORT //
 		return FALSE;
-
 }
 
 
@@ -1022,6 +1105,7 @@ VOID RTMPDeQueuePacket(
 	if (QIdx == NUM_OF_TX_RING)
 	{
 		sQIdx = 0;
+//PS packets use HCCA queue when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA)
 		eQIdx = 3;	// 4 ACs, start from 0.
 	}
 	else
@@ -1064,7 +1148,7 @@ VOID RTMPDeQueuePacket(
 				DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
 				break;
 			}
-
+#ifdef RT2860
 			FreeNumber[QueIdx] = GET_TXRING_FREENO(pAd, QueIdx);
 
 #ifdef DBG_DIAGNOSE
@@ -1089,7 +1173,7 @@ VOID RTMPDeQueuePacket(
 				RTMPFreeTXDUponTxDmaDone(pAd, QueIdx);
 				FreeNumber[QueIdx] = GET_TXRING_FREENO(pAd, QueIdx);
 			}
-
+#endif /* RT2860 */
 			// probe the Queue Head
 			pQueue = &pAd->TxSwQueue[QueIdx];
 			if ((pEntry = pQueue->Head) == NULL)
@@ -1158,32 +1242,29 @@ VOID RTMPDeQueuePacket(
 					pTxBlk->TxFrameType = TX_LEGACY_FRAME;
 			}
 
+#ifdef RT2870
+			DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
+#endif // RT2870 //
 
 			Count += pTxBlk->TxPacketList.Number;
 
-				// Do HardTransmit now.
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				Status = STAHardTransmit(pAd, pTxBlk, QueIdx);
-#endif // CONFIG_STA_SUPPORT //
+			// Do HardTransmit now.
+			Status = STAHardTransmit(pAd, pTxBlk, QueIdx);
 
+#ifdef RT2860
 			DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
 			// static rate also need NICUpdateFifoStaCounters() function.
 			//if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED))
 				NICUpdateFifoStaCounters(pAd);
+#endif
 		}
 
 		RT28XX_STOP_DEQUEUE(pAd, QueIdx, IrqFlags);
 
-
-#ifdef BLOCK_NET_IF
-		if ((pAd->blockQueueTab[QueIdx].SwTxQueueBlockFlag == TRUE)
-			&& (pAd->TxSwQueue[QueIdx].Number < 1))
-		{
-			releaseNetIf(&pAd->blockQueueTab[QueIdx]);
-		}
-#endif // BLOCK_NET_IF //
-
+#ifdef RT2870
+		if (!hasTxDesc)
+			RTUSBKickBulkOut(pAd);
+#endif // RT2870 //
 	}
 
 }
@@ -1318,7 +1399,6 @@ VOID RTMPWriteTxWI(
 
 	pTxWI->NSEQ = NSeq;
 	// John tune the performace with Intel Client in 20 MHz performance
-#ifdef DOT11_N_SUPPORT
 	BASize = pAd->CommonCfg.TxBASize;
 
 	if( BASize >7 )
@@ -1326,7 +1406,6 @@ VOID RTMPWriteTxWI(
 	pTxWI->BAWinSize = BASize;
 	pTxWI->ShortGI = pTransmit->field.ShortGI;
 	pTxWI->STBC = pTransmit->field.STBC;
-#endif // DOT11_N_SUPPORT //
 
 	pTxWI->WirelessCliID = WCID;
 	pTxWI->MPDUtotalByteCount = Length;
@@ -1334,16 +1413,11 @@ VOID RTMPWriteTxWI(
 
 	// If CCK or OFDM, BW must be 20
 	pTxWI->BW = (pTransmit->field.MODE <= MODE_OFDM) ? (BW_20) : (pTransmit->field.BW);
-#ifdef DOT11N_DRAFT3
-	if (pTxWI->BW)
-		pTxWI->BW = (pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth == 0) ? (BW_20) : (pTransmit->field.BW);
-#endif // DOT11N_DRAFT3 //
 
 	pTxWI->MCS = pTransmit->field.MCS;
 	pTxWI->PHYMODE = pTransmit->field.MODE;
 	pTxWI->CFACK = CfAck;
 
-#ifdef DOT11_N_SUPPORT
 	if (pMac)
 	{
 		if (pAd->CommonCfg.bMIMOPSEnable)
@@ -1373,7 +1447,6 @@ VOID RTMPWriteTxWI(
 			pTxWI->MpduDensity = pMac->MpduDensity;
 		}
 	}
-#endif // DOT11_N_SUPPORT //
 
 	pTxWI->PacketId = pTxWI->MCS;
 	NdisMoveMemory(pOutTxWI, &TxWI, sizeof(TXWI_STRUC));
@@ -1387,10 +1460,7 @@ VOID RTMPWriteTxWI_Data(
 {
 	HTTRANSMIT_SETTING	*pTransmit;
 	PMAC_TABLE_ENTRY	pMacEntry;
-#ifdef DOT11_N_SUPPORT
 	UCHAR				BASize;
-#endif // DOT11_N_SUPPORT //
-
 
 	ASSERT(pTxWI);
 
@@ -1409,15 +1479,6 @@ VOID RTMPWriteTxWI_Data(
 	pTxWI->ACK		= TX_BLK_TEST_FLAG(pTxBlk, fTX_bAckRequired);
 	pTxWI->txop		= pTxBlk->FrameGap;
 
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-	if (pMacEntry &&
-		(pAd->StaCfg.BssType == BSS_INFRA) &&
-		(pMacEntry->ValidAsDls == TRUE))
-		pTxWI->WirelessCliID = BSSID_WCID;
-	else
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
 		pTxWI->WirelessCliID		= pTxBlk->Wcid;
 
 	pTxWI->MPDUtotalByteCount	= pTxBlk->MpduHeaderLen + pTxBlk->SrcBufLen;
@@ -1425,11 +1486,6 @@ VOID RTMPWriteTxWI_Data(
 
 	// If CCK or OFDM, BW must be 20
 	pTxWI->BW = (pTransmit->field.MODE <= MODE_OFDM) ? (BW_20) : (pTransmit->field.BW);
-#ifdef DOT11_N_SUPPORT
-#ifdef DOT11N_DRAFT3
-	if (pTxWI->BW)
-		pTxWI->BW = (pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth == 0) ? (BW_20) : (pTransmit->field.BW);
-#endif // DOT11N_DRAFT3 //
 	pTxWI->AMPDU	= ((pTxBlk->TxFrameType == TX_AMPDU_FRAME) ? TRUE : FALSE);
 
 	// John tune the performace with Intel Client in 20 MHz performance
@@ -1446,12 +1502,10 @@ VOID RTMPWriteTxWI_Data(
 	pTxWI->BAWinSize = BASize;
 	pTxWI->ShortGI = pTransmit->field.ShortGI;
 	pTxWI->STBC = pTransmit->field.STBC;
-#endif // DOT11_N_SUPPORT //
 
 	pTxWI->MCS = pTransmit->field.MCS;
 	pTxWI->PHYMODE = pTransmit->field.MODE;
 
-#ifdef DOT11_N_SUPPORT
 	if (pMacEntry)
 	{
 		if ((pMacEntry->MmpsMode == MMPS_DYNAMIC) && (pTransmit->field.MCS > 7))
@@ -1478,7 +1532,6 @@ VOID RTMPWriteTxWI_Data(
 			pTxWI->MpduDensity = pMacEntry->MpduDensity;
 		}
 	}
-#endif // DOT11_N_SUPPORT //
 
 #ifdef DBG_DIAGNOSE
 		if (pTxBlk->QueIdx== 0)
@@ -1523,15 +1576,9 @@ VOID RTMPWriteTxWI_Cache(
 		pTxWI->PacketId = pTransmit->field.MCS;
 	}
 
-#ifdef DOT11_N_SUPPORT
 	pTxWI->AMPDU = ((pMacEntry->NoBADataCountDown == 0) ? TRUE: FALSE);
 	pTxWI->MIMOps = 0;
 
-#ifdef DOT11N_DRAFT3
-	if (pTxWI->BW)
-		pTxWI->BW = (pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth == 0) ? (BW_20) : (pTransmit->field.BW);
-#endif // DOT11N_DRAFT3 //
-
 	if (pAd->CommonCfg.bMIMOPSEnable)
 	{
 		// MIMO Power Save Mode
@@ -1550,7 +1597,6 @@ VOID RTMPWriteTxWI_Cache(
 			}
 		}
 	}
-#endif // DOT11_N_SUPPORT //
 
 #ifdef DBG_DIAGNOSE
 	if (pTxBlk->QueIdx== 0)
@@ -1665,12 +1711,10 @@ BOOLEAN PeerIsAggreOn(
 
 	if (pMacEntry != NULL && CLIENT_STATUS_TEST_FLAG(pMacEntry, AFlags))
 	{
-#ifdef DOT11_N_SUPPORT
 		if (pMacEntry->HTPhyMode.field.MODE >= MODE_HTMIX)
 		{
 			return TRUE;
 		}
-#endif // DOT11_N_SUPPORT //
 
 #ifdef AGGREGATION_SUPPORT
 		if (TxRate >= RATE_6 && pAd->CommonCfg.bAggregationCapable && (!(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) && CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_WMM_CAPABLE))))
@@ -1748,16 +1792,13 @@ PQUEUE_HEADER	RTMPCheckTxSwQueue(
 	return (NULL);
 }
 
-
+#ifdef RT2860
 BOOLEAN  RTMPFreeTXDUponTxDmaDone(
 	IN PRTMP_ADAPTER	pAd,
 	IN UCHAR			QueIdx)
 {
 	PRTMP_TX_RING pTxRing;
 	PTXD_STRUC	  pTxD;
-#ifdef	RT_BIG_ENDIAN
-    PTXD_STRUC      pDestTxD;
-#endif
 	PNDIS_PACKET  pPacket;
 	UCHAR	FREE = 0;
 	TXD_STRUC	TxD, *pOriTxD;
@@ -1771,111 +1812,19 @@ BOOLEAN  RTMPFreeTXDUponTxDmaDone(
 	RTMP_IO_READ32(pAd, TX_DTX_IDX0 + QueIdx * RINGREG_DIFF, &pTxRing->TxDmaIdx);
 	while (pTxRing->TxSwFreeIdx != pTxRing->TxDmaIdx)
 	{
-#ifdef RALINK_ATE
-#ifdef RALINK_28xx_QA
-		PHEADER_802_11	pHeader80211;
-
-		if ((ATE_ON(pAd)) && (pAd->ate.bQATxStart == TRUE))
-		{
-			if (pAd->ate.QID == QueIdx)
-			{
-				pAd->ate.TxDoneCount++;
-				//pAd->ate.Repeat++;
-				pAd->RalinkCounters.KickTxCount++;
-
-				/* always use QID_AC_BE and FIFO_EDCA */
-				ASSERT(pAd->ate.QID == 0);
-				pAd->ate.TxAc0++;
-
-				FREE++;
-#ifndef RT_BIG_ENDIAN
-				pTxD = (PTXD_STRUC) (pTxRing->Cell[pTxRing->TxSwFreeIdx].AllocVa);
-				pOriTxD = pTxD;
-		        NdisMoveMemory(&TxD, pTxD, sizeof(TXD_STRUC));
-				pTxD = &TxD;
-#else
-		        pDestTxD = (PTXD_STRUC) (pTxRing->Cell[pTxRing->TxSwFreeIdx].AllocVa);
-		        pOriTxD = pDestTxD ;
-		        TxD = *pDestTxD;
-		        pTxD = &TxD;
-		        RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-#endif
-				pTxD->DMADONE = 0;
-
-				pHeader80211 = pTxRing->Cell[pTxRing->TxSwFreeIdx].DmaBuf.AllocVa + sizeof(TXWI_STRUC);
-#ifdef RT_BIG_ENDIAN
-				RTMPFrameEndianChange(pAd, (PUCHAR)pHeader80211, DIR_READ, FALSE);
-#endif
-				pHeader80211->Sequence = ++pAd->ate.seq;
-#ifdef RT_BIG_ENDIAN
-				RTMPFrameEndianChange(pAd, (PUCHAR)pHeader80211, DIR_WRITE, FALSE);
-#endif
-
-				if  ((pAd->ate.bQATxStart == TRUE) && (pAd->ate.Mode & ATE_TXFRAME) && (pAd->ate.TxDoneCount < pAd->ate.TxCount))
-				{
-					pAd->RalinkCounters.TransmittedByteCount +=  (pTxD->SDLen1 + pTxD->SDLen0);
-					pAd->RalinkCounters.OneSecDmaDoneCount[QueIdx] ++;
-					INC_RING_INDEX(pTxRing->TxSwFreeIdx, TX_RING_SIZE);
-					/* get tx_tdx_idx again */
-					RTMP_IO_READ32(pAd, TX_DTX_IDX0 + QueIdx * RINGREG_DIFF ,  &pTxRing->TxDmaIdx);
-					goto kick_out;
-				}
-				else if ((pAd->ate.TxStatus == 1)/* or (pAd->ate.bQATxStart == TRUE) ??? */ && (pAd->ate.TxDoneCount == pAd->ate.TxCount))//<========================PETER
-				{
-					DBGPRINT(RT_DEBUG_TRACE,("all Tx is done\n"));
-					// Tx status enters idle mode.
-					pAd->ate.TxStatus = 0;
-				}
-				else if (!(pAd->ate.Mode & ATE_TXFRAME))
-				{
-					/* not complete sending yet, but someone press the Stop TX botton. */
-					DBGPRINT(RT_DEBUG_ERROR,("not complete sending yet, but someone pressed the Stop TX bottom\n"));
-					DBGPRINT(RT_DEBUG_ERROR,("pAd->ate.Mode = 0x%02x\n", pAd->ate.Mode));
-				}
-				else
-				{
-					DBGPRINT(RT_DEBUG_OFF,("pTxRing->TxSwFreeIdx = %d\n", pTxRing->TxSwFreeIdx));
-  				}
-#ifndef RT_BIG_ENDIAN
-	        	NdisMoveMemory(pOriTxD, pTxD, sizeof(TXD_STRUC));
-#else
-        		RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-        		*pDestTxD = TxD;
-#endif // RT_BIG_ENDIAN //
-
-				INC_RING_INDEX(pTxRing->TxSwFreeIdx, TX_RING_SIZE);
-				continue;
-			}
-		}
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
 		// static rate also need NICUpdateFifoStaCounters() function.
 		//if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED))
 			NICUpdateFifoStaCounters(pAd);
 
 		/* Note : If (pAd->ate.bQATxStart == TRUE), we will never reach here. */
 		FREE++;
-#ifndef RT_BIG_ENDIAN
                 pTxD = (PTXD_STRUC) (pTxRing->Cell[pTxRing->TxSwFreeIdx].AllocVa);
 		pOriTxD = pTxD;
                 NdisMoveMemory(&TxD, pTxD, sizeof(TXD_STRUC));
 		pTxD = &TxD;
-#else
-        pDestTxD = (PTXD_STRUC) (pTxRing->Cell[pTxRing->TxSwFreeIdx].AllocVa);
-        pOriTxD = pDestTxD ;
-        TxD = *pDestTxD;
-        pTxD = &TxD;
-        RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-#endif
 
 		pTxD->DMADONE = 0;
 
-
-#ifdef RALINK_ATE
-		/* Execution of this block is not allowed when ATE is running. */
-		if (!(ATE_ON(pAd)))
-#endif // RALINK_ATE //
 /*====================================================================*/
 		{
 			pPacket = pTxRing->Cell[pTxRing->TxSwFreeIdx].pNdisPacket;
@@ -1915,59 +1864,8 @@ BOOLEAN  RTMPFreeTXDUponTxDmaDone(
 		INC_RING_INDEX(pTxRing->TxSwFreeIdx, TX_RING_SIZE);
 		/* get tx_tdx_idx again */
 		RTMP_IO_READ32(pAd, TX_DTX_IDX0 + QueIdx * RINGREG_DIFF ,  &pTxRing->TxDmaIdx);
-#ifdef RT_BIG_ENDIAN
-        RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-        *pDestTxD = TxD;
-#else
-        NdisMoveMemory(pOriTxD, pTxD, sizeof(TXD_STRUC));
-#endif
-
-#ifdef RALINK_ATE
-#ifdef RALINK_28xx_QA
-kick_out:
-#endif // RALINK_28xx_QA //
 
-		//
-		// ATE_TXCONT mode also need to send some normal frames, so let it in.
-		// ATE_STOP must be changed not to be 0xff
-		// to prevent it from running into this block.
-		//
-		if ((pAd->ate.Mode & ATE_TXFRAME) && (pAd->ate.QID == QueIdx))
-		{
-			// TxDoneCount++ has been done if QA is used.
-			if (pAd->ate.bQATxStart == FALSE)
-			{
-				pAd->ate.TxDoneCount++;
-			}
-			if (((pAd->ate.TxCount - pAd->ate.TxDoneCount + 1) >= TX_RING_SIZE))
-			{
-				/* Note : We increase TxCpuIdx here, not TxSwFreeIdx ! */
-				INC_RING_INDEX(pAd->TxRing[QueIdx].TxCpuIdx, TX_RING_SIZE);
-#ifndef RT_BIG_ENDIAN//<==========================PETER
-				pTxD = (PTXD_STRUC) (pTxRing->Cell[pAd->TxRing[QueIdx].TxCpuIdx].AllocVa);
-				pOriTxD = pTxD;
-		        NdisMoveMemory(&TxD, pTxD, sizeof(TXD_STRUC));
-				pTxD = &TxD;
-#else
-		        pDestTxD = (PTXD_STRUC) (pTxRing->Cell[pAd->TxRing[QueIdx].TxCpuIdx].AllocVa);
-		        pOriTxD = pDestTxD ;
-		        TxD = *pDestTxD;
-		        pTxD = &TxD;
-		        RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-#endif
-				pTxD->DMADONE = 0;
-#ifndef RT_BIG_ENDIAN//<==========================PETER
-        		NdisMoveMemory(pOriTxD, pTxD, sizeof(TXD_STRUC));
-#else
-        		RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-        		*pDestTxD = TxD;
-#endif
-				// kick Tx-Ring.
-				RTMP_IO_WRITE32(pAd, TX_CTX_IDX0 + QueIdx * RINGREG_DIFF, pAd->TxRing[QueIdx].TxCpuIdx);
-				pAd->RalinkCounters.KickTxCount++;
-			}
-		}
-#endif // RALINK_ATE //
+        NdisMoveMemory(pOriTxD, pTxD, sizeof(TXD_STRUC));
 	}
 
 
@@ -2050,10 +1948,6 @@ VOID	RTMPHandleMgmtRingDmaDoneInterrupt(
 	IN	PRTMP_ADAPTER	pAd)
 {
 	PTXD_STRUC	 pTxD;
-#ifdef RT_BIG_ENDIAN
-    PTXD_STRUC      pDestTxD;
-    TXD_STRUC       TxD;
-#endif
 	PNDIS_PACKET pPacket;
 	UCHAR	FREE = 0;
 	PRTMP_MGMT_RING pMgmtRing = &pAd->MgmtRing;
@@ -2064,14 +1958,7 @@ VOID	RTMPHandleMgmtRingDmaDoneInterrupt(
 	while (pMgmtRing->TxSwFreeIdx!= pMgmtRing->TxDmaIdx)
 	{
 		FREE++;
-#ifdef RT_BIG_ENDIAN
-        pDestTxD = (PTXD_STRUC) (pMgmtRing->Cell[pAd->MgmtRing.TxSwFreeIdx].AllocVa);
-        TxD = *pDestTxD;
-        pTxD = &TxD;
-		RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-#else
 		pTxD = (PTXD_STRUC) (pMgmtRing->Cell[pAd->MgmtRing.TxSwFreeIdx].AllocVa);
-#endif
 		pTxD->DMADONE = 0;
 		pPacket = pMgmtRing->Cell[pMgmtRing->TxSwFreeIdx].pNdisPacket;
 
@@ -2091,11 +1978,6 @@ VOID	RTMPHandleMgmtRingDmaDoneInterrupt(
 		}
 		pMgmtRing->Cell[pMgmtRing->TxSwFreeIdx].pNextNdisPacket = NULL;
 		INC_RING_INDEX(pMgmtRing->TxSwFreeIdx, MGMT_RING_SIZE);
-
-#ifdef RT_BIG_ENDIAN
-        RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-        WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, TRUE, TYPE_TXD);
-#endif
 	}
 	NdisReleaseSpinLock(&pAd->MgmtRingLock);
 
@@ -2293,6 +2175,7 @@ VOID DBGPRINT_RX_RING(
 	DBGPRINT_RAW(RT_DEBUG_TRACE,(" 	RxSwReadIdx [%d]=", AC0freeIdx));
 	DBGPRINT_RAW(RT_DEBUG_TRACE,("	pending-NDIS=%ld\n", pAd->RalinkCounters.PendingNdisPacketCount));
 }
+#endif /* RT2860 */
 
 /*
 	========================================================================
@@ -2352,7 +2235,15 @@ VOID RTMPResumeMsduTransmission(
 {
 	DBGPRINT(RT_DEBUG_TRACE,("SCAN done, resume MSDU transmission ...\n"));
 
-
+#ifdef RT30xx
+	// After finish BSS_SCAN_IN_PROGRESS, we need to restore Current R66 value
+	// R66 should not be 0
+	if (pAd->BbpTuning.R66CurrentValue == 0)
+	{
+		pAd->BbpTuning.R66CurrentValue = 0x38;
+		DBGPRINT_ERR(("RTMPResumeMsduTransmission, R66CurrentValue=0...\n"));
+	}
+#endif
 	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, pAd->BbpTuning.R66CurrentValue);
 
 	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
@@ -2401,7 +2292,6 @@ UINT deaggregate_AMSDU_announce(
 		// convert to 802.3 header
         CONVERT_TO_802_3(Header802_3, pDA, pSA, pPayload, PayloadSize, pRemovedLLCSNAP);
 
-#ifdef CONFIG_STA_SUPPORT
 		if ((Header802_3[12] == 0x88) && (Header802_3[13] == 0x8E) )
 		{
 		    // avoid local heap overflow, use dyanamic allocation
@@ -2411,10 +2301,7 @@ UINT deaggregate_AMSDU_announce(
 		   WpaEAPOLKeyAction(pAd, Elem);
 		   kfree(Elem);
 		}
-#endif // CONFIG_STA_SUPPORT //
 
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 	        	if (pRemovedLLCSNAP)
 	        	{
@@ -2423,15 +2310,11 @@ UINT deaggregate_AMSDU_announce(
 	    			NdisMoveMemory(pPayload, &Header802_3[0], LENGTH_802_3);
 	        	}
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 		pClonePacket = ClonePacket(pAd, pPacket, pPayload, PayloadSize);
 		if (pClonePacket)
 		{
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pClonePacket, RTMP_GET_PACKET_IF(pPacket));
-#endif // CONFIG_STA_SUPPORT //
+			ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pClonePacket, RTMP_GET_PACKET_IF(pPacket));
 		}
 
 
@@ -2527,11 +2410,9 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(
 		return NULL;
 
 	FirstWcid = 1;
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+
 	if (pAd->StaCfg.BssType == BSS_INFRA)
 		FirstWcid = 2;
-#endif // CONFIG_STA_SUPPORT //
 
 	// allocate one MAC entry
 	NdisAcquireSpinLock(&pAd->MacTabLock);
@@ -2542,11 +2423,6 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(
 			(pAd->MacTab.Content[i].ValidAsWDS == FALSE) &&
 			(pAd->MacTab.Content[i].ValidAsApCli== FALSE) &&
 			(pAd->MacTab.Content[i].ValidAsMesh == FALSE)
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-			&& (pAd->MacTab.Content[i].ValidAsDls == FALSE)
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
 			)
 		{
 			pEntry = &pAd->MacTab.Content[i];
@@ -2558,24 +2434,7 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(
 				pEntry->PairwiseKey.KeyLen = 0;
 				pEntry->PairwiseKey.CipherAlg = CIPHER_NONE;
 			}
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-			if (apidx >= MIN_NET_DEVICE_FOR_DLS)
-			{
-				pEntry->ValidAsCLI = FALSE;
-				pEntry->ValidAsWDS = FALSE;
-				pEntry->ValidAsApCli = FALSE;
-				pEntry->ValidAsMesh = FALSE;
-				pEntry->ValidAsDls = TRUE;
-				pEntry->isCached = FALSE;
-			}
-			else
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
 			{
-
-#ifdef CONFIG_STA_SUPPORT
-				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				{
 					pEntry->ValidAsCLI = TRUE;
 					pEntry->ValidAsWDS = FALSE;
@@ -2583,7 +2442,6 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(
 					pEntry->ValidAsMesh = FALSE;
 					pEntry->ValidAsDls = FALSE;
 				}
-#endif // CONFIG_STA_SUPPORT //
 			}
 
 			pEntry->bIAmBadAtheros = FALSE;
@@ -2600,43 +2458,32 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(
 				pEntry->apidx = (apidx - MIN_NET_DEVICE_FOR_APCLI);
 			else if (pEntry->ValidAsWDS)
 				pEntry->apidx = (apidx - MIN_NET_DEVICE_FOR_WDS);
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-			else if (pEntry->ValidAsDls)
-				pEntry->apidx = (apidx - MIN_NET_DEVICE_FOR_DLS);
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
 			else
 				pEntry->apidx = apidx;
 
 			{
-
-#ifdef CONFIG_STA_SUPPORT
-				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				{
 					pEntry->AuthMode = pAd->StaCfg.AuthMode;
 					pEntry->WepStatus = pAd->StaCfg.WepStatus;
 					pEntry->PrivacyFilter = Ndis802_11PrivFilterAcceptAll;
+#ifdef RT2860
 					AsicRemovePairwiseKeyEntry(pAd, pEntry->apidx, (UCHAR)i);
+#endif
 				}
-#endif // CONFIG_STA_SUPPORT //
 			}
 
 			pEntry->GTKState = REKEY_NEGOTIATING;
 			pEntry->PairwiseKey.KeyLen = 0;
 			pEntry->PairwiseKey.CipherAlg = CIPHER_NONE;
-#ifdef CONFIG_STA_SUPPORT
+
+#ifdef RT2860
 			if ((pAd->OpMode == OPMODE_STA) &&
 				(pAd->StaCfg.BssType == BSS_ADHOC))
 				pEntry->PortSecured = WPA_802_1X_PORT_SECURED;
 			else
-#ifdef QOS_DLS_SUPPORT
-			if (pEntry->ValidAsDls == TRUE)
-				pEntry->PortSecured = WPA_802_1X_PORT_SECURED;
-			else
-#endif //QOS_DLS_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
+#endif
 			pEntry->PortSecured = WPA_802_1X_PORT_NOT_SECURED;
+
 			pEntry->PMKID_CacheIdx = ENTRY_NOT_FOUND;
 			COPY_MAC_ADDR(pEntry->Addr, pAddr);
 			pEntry->Sst = SST_NOT_AUTH;
@@ -2706,11 +2553,6 @@ BOOLEAN MacTableDeleteEntry(
 	pEntry = &pAd->MacTab.Content[wcid];
 
 	if (pEntry && (pEntry->ValidAsCLI || pEntry->ValidAsApCli || pEntry->ValidAsWDS || pEntry->ValidAsMesh
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
- 		|| pEntry->ValidAsDls
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
 		))
 	{
 		if (MAC_ADDR_EQUAL(pEntry->Addr, pAddr))
@@ -2719,11 +2561,8 @@ BOOLEAN MacTableDeleteEntry(
 			// Delete this entry from ASIC on-chip WCID Table
 			RT28XX_STA_ENTRY_MAC_RESET(pAd, wcid);
 
-#ifdef DOT11_N_SUPPORT
 			// free resources of BA
 			BASessionTearDownALL(pAd, pEntry->Aid);
-#endif // DOT11_N_SUPPORT //
-
 
 			pPrevEntry = NULL;
 			pProbeEntry = pAd->MacTab.Hash[HashIdx];
@@ -2777,10 +2616,13 @@ BOOLEAN MacTableDeleteEntry(
 	//Reset operating mode when no Sta.
 	if (pAd->MacTab.Size == 0)
 	{
-#ifdef DOT11_N_SUPPORT
 		pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode = 0;
-#endif // DOT11_N_SUPPORT //
+#ifndef RT30xx
 		AsicUpdateProtect(pAd, 0 /*pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode*/, (ALLN_SETPROTECT), TRUE, 0 /*pAd->MacTab.fAnyStationNonGF*/);
+#endif
+#ifdef RT30xx
+		RT28XX_UPDATE_PROTECT(pAd);  // edit by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet
+#endif
 	}
 
 	return TRUE;
@@ -2804,19 +2646,22 @@ VOID MacTableReset(
 
 	for (i=1; i<MAX_LEN_OF_MAC_TABLE; i++)
 	{
+#ifdef RT2860
 		RT28XX_STA_ENTRY_MAC_RESET(pAd, i);
+#endif
 		if (pAd->MacTab.Content[i].ValidAsCLI == TRUE)
 	   {
-
-#ifdef DOT11_N_SUPPORT
 			// free resources of BA
 			BASessionTearDownALL(pAd, i);
-#endif // DOT11_N_SUPPORT //
 
 			pAd->MacTab.Content[i].ValidAsCLI = FALSE;
 
 
 
+#ifdef RT2870
+			NdisZeroMemory(pAd->MacTab.Content[i].Addr, 6);
+			RT28XX_STA_ENTRY_MAC_RESET(pAd, i);
+#endif // RT2870 //
 
 			//AsicDelWcidTab(pAd, i);
 		}
@@ -3116,10 +2961,7 @@ VOID Indicate_Legacy_Packet(
 	// 2. remove LLC
 	// 		a. pointer pRxBlk->pData to payload
 	//      b. modify pRxBlk->DataSize
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
-#endif // CONFIG_STA_SUPPORT //
+	RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
 
 	if (pRxBlk->DataSize > MAX_RX_PKT_LEN)
 	{
@@ -3132,17 +2974,44 @@ VOID Indicate_Legacy_Packet(
 
 	STATS_INC_RX_PACKETS(pAd, FromWhichBSSID);
 
+#ifdef RT2870
+	if (pAd->CommonCfg.bDisableReordering == 0)
+	{
+		PBA_REC_ENTRY		pBAEntry;
+		ULONG				Now32;
+		UCHAR				Wcid = pRxBlk->pRxWI->WirelessCliID;
+		UCHAR				TID = pRxBlk->pRxWI->TID;
+		USHORT				Idx;
+
+#define REORDERING_PACKET_TIMEOUT		((100 * HZ)/1000)	// system ticks -- 100 ms
+
+		if (Wcid < MAX_LEN_OF_MAC_TABLE)
+		{
+			Idx = pAd->MacTab.Content[Wcid].BARecWcidArray[TID];
+			if (Idx != 0)
+			{
+				pBAEntry = &pAd->BATable.BARecEntry[Idx];
+				// update last rx time
+				NdisGetSystemUpTime(&Now32);
+				if ((pBAEntry->list.qlen > 0) &&
+					 RTMP_TIME_AFTER((unsigned long)Now32, (unsigned long)(pBAEntry->LastIndSeqAtTimer+(REORDERING_PACKET_TIMEOUT)))
+	   				)
+				{
+					printk("Indicate_Legacy_Packet():flush reordering_timeout_mpdus! RxWI->Flags=%d, pRxWI.TID=%d, RxD->AMPDU=%d!\n", pRxBlk->Flags, pRxBlk->pRxWI->TID, pRxBlk->RxD.AMPDU);
+					hex_dump("Dump the legacy Packet:", GET_OS_PKT_DATAPTR(pRxBlk->pRxPacket), 64);
+					ba_flush_reordering_timeout_mpdus(pAd, pBAEntry, Now32);
+				}
+			}
+		}
+	}
+#endif // RT2870 //
 
 	wlan_802_11_to_802_3_packet(pAd, pRxBlk, Header802_3, FromWhichBSSID);
 
 	//
 	// pass this 802.3 packet to upper layer or forward this packet to WM directly
 	//
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pRxPacket, FromWhichBSSID);
-#endif // CONFIG_STA_SUPPORT //
-
+	ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pRxPacket, FromWhichBSSID);
 }
 
 
@@ -3152,22 +3021,18 @@ VOID CmmRxnonRalinkFrameIndicate(
 	IN	RX_BLK			*pRxBlk,
 	IN	UCHAR			FromWhichBSSID)
 {
-#ifdef DOT11_N_SUPPORT
 	if (RX_BLK_TEST_FLAG(pRxBlk, fRX_AMPDU) && (pAd->CommonCfg.bDisableReordering == 0))
 	{
 		Indicate_AMPDU_Packet(pAd, pRxBlk, FromWhichBSSID);
 	}
 	else
-#endif // DOT11_N_SUPPORT //
 	{
-#ifdef DOT11_N_SUPPORT
 		if (RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU))
 		{
 			// handle A-MSDU
 			Indicate_AMSDU_Packet(pAd, pRxBlk, FromWhichBSSID);
 		}
 		else
-#endif // DOT11_N_SUPPORT //
 		{
 			Indicate_Legacy_Packet(pAd, pRxBlk, FromWhichBSSID);
 		}
@@ -3205,11 +3070,7 @@ VOID CmmRxRalinkFrameIndicate(
 	}
 
 	// get 802.3 Header and  remove LLC
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
-#endif // CONFIG_STA_SUPPORT //
-
+	RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
 
 	ASSERT(pRxBlk->pRxPacket);
 
@@ -3219,10 +3080,8 @@ VOID CmmRxRalinkFrameIndicate(
 	Payload2Size = Msdu2Size - LENGTH_802_3;
 
 	pData2 = pRxBlk->pData + Payload1Size + LENGTH_802_3;
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		pPacket2 = duplicate_pkt(pAd, (pData2-LENGTH_802_3), LENGTH_802_3, pData2, Payload2Size, FromWhichBSSID);
-#endif // CONFIG_STA_SUPPORT //
+
+	pPacket2 = duplicate_pkt(pAd, (pData2-LENGTH_802_3), LENGTH_802_3, pData2, Payload2Size, FromWhichBSSID);
 
 	if (!pPacket2)
 	{
@@ -3235,17 +3094,11 @@ VOID CmmRxRalinkFrameIndicate(
 	pRxBlk->DataSize = Payload1Size;
 	wlan_802_11_to_802_3_packet(pAd, pRxBlk, Header802_3, FromWhichBSSID);
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pRxBlk->pRxPacket, FromWhichBSSID);
-#endif // CONFIG_STA_SUPPORT //
+	ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pRxBlk->pRxPacket, FromWhichBSSID);
 
 	if (pPacket2)
 	{
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pPacket2, FromWhichBSSID);
-#endif // CONFIG_STA_SUPPORT //
+		ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pPacket2, FromWhichBSSID);
 	}
 }
 
@@ -3388,15 +3241,11 @@ VOID Indicate_EAPOL_Packet(
 {
 	MAC_TABLE_ENTRY *pEntry = NULL;
 
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		pEntry = &pAd->MacTab.Content[BSSID_WCID];
 		STARxEAPOLFrameIndicate(pAd, pEntry, pRxBlk, FromWhichBSSID);
 		return;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	if (pEntry == NULL)
 	{
diff --git a/drivers/staging/rt2860/common/cmm_data_2860.c b/drivers/staging/rt2860/common/cmm_data_2860.c
index fae741e4bee..fb1735533b7 100644
--- a/drivers/staging/rt2860/common/cmm_data_2860.c
+++ b/drivers/staging/rt2860/common/cmm_data_2860.c
@@ -110,10 +110,6 @@ USHORT RtmpPCI_WriteSingleTxResource(
 	UCHAR			*pDMAHeaderBufVA;
 	USHORT			TxIdx, RetTxIdx;
 	PTXD_STRUC		pTxD;
-#ifdef RT_BIG_ENDIAN
-    PTXD_STRUC      pDestTxD;
-    TXD_STRUC       TxD;
-#endif
 	UINT32			BufBasePaLow;
 	PRTMP_TX_RING	pTxRing;
 	USHORT			hwHeaderLen;
@@ -137,13 +133,8 @@ USHORT RtmpPCI_WriteSingleTxResource(
 	//
 	// build Tx Descriptor
 	//
-#ifndef RT_BIG_ENDIAN
 	pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
-#else
-	pDestTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
-	TxD = *pDestTxD;
-	pTxD = &TxD;
-#endif
+
 	NdisZeroMemory(pTxD, TXD_SIZE);
 
 	pTxD->SDPtr0 = BufBasePaLow;
@@ -154,12 +145,6 @@ USHORT RtmpPCI_WriteSingleTxResource(
 	pTxD->LastSec1 = (bIsLast) ? 1 : 0;
 
 	RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
-#ifdef RT_BIG_ENDIAN
-	RTMPWIEndianChange((PUCHAR)(pDMAHeaderBufVA + TXINFO_SIZE), TYPE_TXWI);
-	RTMPFrameEndianChange(pAd, (PUCHAR)(pDMAHeaderBufVA + TXINFO_SIZE + TXWI_SIZE), DIR_WRITE, FALSE);
-	RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-    WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
-#endif // RT_BIG_ENDIAN //
 
 	RetTxIdx = TxIdx;
 	//
@@ -184,10 +169,6 @@ USHORT RtmpPCI_WriteMultiTxResource(
 	UCHAR			*pDMAHeaderBufVA;
 	USHORT			TxIdx, RetTxIdx;
 	PTXD_STRUC		pTxD;
-#ifdef RT_BIG_ENDIAN
-    PTXD_STRUC      pDestTxD;
-    TXD_STRUC       TxD;
-#endif
 	UINT32			BufBasePaLow;
 	PRTMP_TX_RING	pTxRing;
 	USHORT			hwHdrLen;
@@ -231,13 +212,8 @@ USHORT RtmpPCI_WriteMultiTxResource(
 	//
 	// build Tx Descriptor
 	//
-#ifndef RT_BIG_ENDIAN
 	pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
-#else
-	pDestTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
-	TxD = *pDestTxD;
-	pTxD = &TxD;
-#endif
+
 	NdisZeroMemory(pTxD, TXD_SIZE);
 
 	pTxD->SDPtr0 = BufBasePaLow;
@@ -249,17 +225,6 @@ USHORT RtmpPCI_WriteMultiTxResource(
 
 	RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
 
-#ifdef RT_BIG_ENDIAN
-	if (frameNum == 0)
-		RTMPFrameEndianChange(pAd, (PUCHAR)(pDMAHeaderBufVA+ TXINFO_SIZE + TXWI_SIZE), DIR_WRITE, FALSE);
-
-	if (frameNum != 0)
-		RTMPWIEndianChange((PUCHAR)(pDMAHeaderBufVA + TXINFO_SIZE), TYPE_TXWI);
-
-	RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-	WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
-#endif // RT_BIG_ENDIAN //
-
 	RetTxIdx = TxIdx;
 	//
 	// Update Tx index
@@ -290,10 +255,6 @@ VOID RtmpPCI_FinalWriteTxResource(
 	pTxRing = &pAd->TxRing[pTxBlk->QueIdx];
 	pTxWI = (PTXWI_STRUC) pTxRing->Cell[FirstTxIdx].DmaBuf.AllocVa;
 	pTxWI->MPDUtotalByteCount = totalMPDUSize;
-#ifdef RT_BIG_ENDIAN
-	RTMPWIEndianChange((PUCHAR)pTxWI, TYPE_TXWI);
-#endif // RT_BIG_ENDIAN //
-
 }
 
 
@@ -303,10 +264,6 @@ VOID RtmpPCIDataLastTxIdx(
 	IN	USHORT			LastTxIdx)
 {
 	PTXD_STRUC		pTxD;
-#ifdef RT_BIG_ENDIAN
-    PTXD_STRUC      pDestTxD;
-    TXD_STRUC       TxD;
-#endif
 	PRTMP_TX_RING	pTxRing;
 
 	//
@@ -317,21 +274,9 @@ VOID RtmpPCIDataLastTxIdx(
 	//
 	// build Tx Descriptor
 	//
-#ifndef RT_BIG_ENDIAN
 	pTxD = (PTXD_STRUC) pTxRing->Cell[LastTxIdx].AllocVa;
-#else
-	pDestTxD = (PTXD_STRUC) pTxRing->Cell[LastTxIdx].AllocVa;
-	TxD = *pDestTxD;
-	pTxD = &TxD;
-#endif
 
 	pTxD->LastSec1 = 1;
-
-#ifdef RT_BIG_ENDIAN
-	RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-    WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
-#endif // RT_BIG_ENDIAN //
-
 }
 
 
@@ -344,10 +289,6 @@ USHORT	RtmpPCI_WriteFragTxResource(
 	UCHAR			*pDMAHeaderBufVA;
 	USHORT			TxIdx, RetTxIdx;
 	PTXD_STRUC		pTxD;
-#ifdef RT_BIG_ENDIAN
-    PTXD_STRUC      pDestTxD;
-    TXD_STRUC       TxD;
-#endif
 	UINT32			BufBasePaLow;
 	PRTMP_TX_RING	pTxRing;
 	USHORT			hwHeaderLen;
@@ -373,13 +314,8 @@ USHORT	RtmpPCI_WriteFragTxResource(
 	//
 	// Build Tx Descriptor
 	//
-#ifndef RT_BIG_ENDIAN
 	pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
-#else
-	pDestTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
-	TxD = *pDestTxD;
-	pTxD = &TxD;
-#endif
+
 	NdisZeroMemory(pTxD, TXD_SIZE);
 
 	if (fragNum == pTxBlk->TotalFragNum)
@@ -397,13 +333,6 @@ USHORT	RtmpPCI_WriteFragTxResource(
 
 	RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
 
-#ifdef RT_BIG_ENDIAN
-	RTMPWIEndianChange((PUCHAR)(pDMAHeaderBufVA + TXINFO_SIZE), TYPE_TXWI);
-	RTMPFrameEndianChange(pAd, (PUCHAR)(pDMAHeaderBufVA + TXINFO_SIZE + TXWI_SIZE), DIR_WRITE, FALSE);
-	RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-    WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
-#endif // RT_BIG_ENDIAN //
-
 	RetTxIdx = TxIdx;
 	pTxBlk->Priv += pTxBlk->SrcBufLen;
 
@@ -431,20 +360,9 @@ int RtmpPCIMgmtKickOut(
 	IN UINT 			SrcBufLen)
 {
 	PTXD_STRUC		pTxD;
-#ifdef RT_BIG_ENDIAN
-    PTXD_STRUC      pDestTxD;
-    TXD_STRUC       TxD;
-#endif
 	ULONG			SwIdx = pAd->MgmtRing.TxCpuIdx;
 
-#ifdef RT_BIG_ENDIAN
-    pDestTxD  = (PTXD_STRUC)pAd->MgmtRing.Cell[SwIdx].AllocVa;
-    TxD = *pDestTxD;
-    pTxD = &TxD;
-    RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-#else
 	pTxD  = (PTXD_STRUC) pAd->MgmtRing.Cell[SwIdx].AllocVa;
-#endif
 
 	pAd->MgmtRing.Cell[SwIdx].pNdisPacket = pPacket;
 	pAd->MgmtRing.Cell[SwIdx].pNextNdisPacket = NULL;
@@ -457,11 +375,6 @@ int RtmpPCIMgmtKickOut(
 	pTxD->SDPtr0 = PCI_MAP_SINGLE(pAd, pSrcBufVA, SrcBufLen, 0, PCI_DMA_TODEVICE);;
 	pTxD->SDLen0 = SrcBufLen;
 
-#ifdef RT_BIG_ENDIAN
-	RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-    WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
-#endif
-
 	pAd->RalinkCounters.KickTxCount++;
 	pAd->RalinkCounters.OneSecTxDoneCount++;
 
@@ -473,8 +386,6 @@ int RtmpPCIMgmtKickOut(
 	return 0;
 }
 
-
-#ifdef CONFIG_STA_SUPPORT
 /*
 	========================================================================
 
@@ -570,12 +481,11 @@ NDIS_STATUS RTMPCheckRxError(
 		if (pRxD->CipherErr == 2)
 		{
 			pWpaKey = &pAd->SharedKey[BSS0][pRxWI->KeyIndex];
-#ifdef WPA_SUPPLICANT_SUPPORT
+
             if (pAd->StaCfg.WpaSupplicantUP)
                 WpaSendMicFailureToWpaSupplicant(pAd,
                                    (pWpaKey->Type == PAIRWISEKEY) ? TRUE:FALSE);
             else
-#endif // WPA_SUPPLICANT_SUPPORT //
 			    RTMPReportMicError(pAd, pWpaKey);
 
             if (((pRxD->CipherErr & 2) == 2) && pAd->CommonCfg.bWirelessEvent && INFRA_ON(pAd))
@@ -1128,8 +1038,6 @@ VOID  RadioOnExec(
 	}
 }
 
-#endif // CONFIG_STA_SUPPORT //
-
 VOID RT28xxPciMlmeRadioOn(
 	IN PRTMP_ADAPTER pAd)
 {
@@ -1163,7 +1071,6 @@ VOID RT28xxPciMlmeRadioOn(
 	    RTMPSetLED(pAd, LED_RADIO_ON);
     }
 
-#ifdef CONFIG_STA_SUPPORT
     if ((pAd->OpMode == OPMODE_STA) &&
         (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)))
     {
@@ -1176,7 +1083,6 @@ VOID RT28xxPciMlmeRadioOn(
     	RTMPCancelTimer(&pAd->Mlme.RadioOnOffTimer,	&Cancelled);
     	RTMPSetTimer(&pAd->Mlme.RadioOnOffTimer, 10);
     }
-#endif // CONFIG_STA_SUPPORT //
 }
 
 VOID RT28xxPciMlmeRadioOFF(
@@ -1199,8 +1105,6 @@ VOID RT28xxPciMlmeRadioOFF(
 	// Set LED
 	RTMPSetLED(pAd, LED_RADIO_OFF);
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
     {
     	BOOLEAN		Cancelled;
 
@@ -1249,7 +1153,6 @@ VOID RT28xxPciMlmeRadioOFF(
 			return;
 		}
     }
-#endif // CONFIG_STA_SUPPORT //
 
 	// Set Radio off flag
 	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
diff --git a/drivers/staging/rt2860/common/cmm_info.c b/drivers/staging/rt2860/common/cmm_info.c
index c3e13195e12..306c3a21f90 100644
--- a/drivers/staging/rt2860/common/cmm_info.c
+++ b/drivers/staging/rt2860/common/cmm_info.c
@@ -63,7 +63,6 @@ INT	Show_FragThreshold_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	OUT	PUCHAR			pBuf);
 
-#ifdef DOT11_N_SUPPORT
 INT	Show_HtBw_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	OUT	PUCHAR			pBuf);
@@ -103,7 +102,6 @@ INT	Show_HtAmsdu_Proc(
 INT	Show_HtAutoBa_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	OUT	PUCHAR			pBuf);
-#endif // DOT11_N_SUPPORT //
 
 INT	Show_CountryRegion_Proc(
 	IN	PRTMP_ADAPTER	pAd,
@@ -133,11 +131,9 @@ INT	Show_IEEE80211H_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	OUT	PUCHAR			pBuf);
 
-#ifdef CONFIG_STA_SUPPORT
 INT	Show_NetworkType_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	OUT	PUCHAR			pBuf);
-#endif // CONFIG_STA_SUPPORT //
 
 INT	Show_AuthMode_Proc(
 	IN	PRTMP_ADAPTER	pAd,
@@ -184,7 +180,6 @@ static struct {
 	{"BGProtection",			Show_BGProtection_Proc},
 	{"RTSThreshold",			Show_RTSThreshold_Proc},
 	{"FragThreshold",			Show_FragThreshold_Proc},
-#ifdef DOT11_N_SUPPORT
 	{"HtBw",					Show_HtBw_Proc},
 	{"HtMcs",					Show_HtMcs_Proc},
 	{"HtGi",					Show_HtGi_Proc},
@@ -195,7 +190,6 @@ static struct {
 	{"HtRdg",		        	Show_HtRdg_Proc},
 	{"HtAmsdu",		        	Show_HtAmsdu_Proc},
 	{"HtAutoBa",		        Show_HtAutoBa_Proc},
-#endif // DOT11_N_SUPPORT //
 	{"CountryRegion",			Show_CountryRegion_Proc},
 	{"CountryRegionABand",		Show_CountryRegionABand_Proc},
 	{"CountryCode",				Show_CountryCode_Proc},
@@ -207,9 +201,7 @@ static struct {
 	{"WmmCapable",				Show_WmmCapable_Proc},
 #endif
 	{"IEEE80211H",				Show_IEEE80211H_Proc},
-#ifdef CONFIG_STA_SUPPORT
     {"NetworkType",				Show_NetworkType_Proc},
-#endif // CONFIG_STA_SUPPORT //
 	{"AuthMode",				Show_AuthMode_Proc},
 	{"EncrypType",				Show_EncrypType_Proc},
 	{"DefaultKeyID",			Show_DefaultKeyID_Proc},
@@ -233,11 +225,7 @@ INT Set_DriverVersion_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	IN	PUCHAR			arg)
 {
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		DBGPRINT(RT_DEBUG_TRACE, ("Driver version-%s\n", STA_DRIVER_VERSION));
-#endif // CONFIG_STA_SUPPORT //
+	DBGPRINT(RT_DEBUG_TRACE, ("Driver version-%s\n", STA_DRIVER_VERSION));
 
     return TRUE;
 }
@@ -259,10 +247,6 @@ INT Set_CountryRegion_Proc(
 
 	region = simple_strtol(arg, 0, 10);
 
-#ifdef EXT_BUILD_CHANNEL_LIST
-	return -EOPNOTSUPP;
-#endif // EXT_BUILD_CHANNEL_LIST //
-
 	// Country can be set only when EEPROM not programmed
 	if (pAd->CommonCfg.CountryRegion & 0x80)
 	{
@@ -309,10 +293,6 @@ INT Set_CountryRegionABand_Proc(
 
 	region = simple_strtol(arg, 0, 10);
 
-#ifdef EXT_BUILD_CHANNEL_LIST
-	return -EOPNOTSUPP;
-#endif // EXT_BUILD_CHANNEL_LIST //
-
 	// Country can be set only when EEPROM not programmed
 	if (pAd->CommonCfg.CountryRegionForABand & 0x80)
 	{
@@ -355,20 +335,15 @@ INT	Set_WirelessMode_Proc(
 
 	WirelessMode = simple_strtol(arg, 0, 10);
 
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		INT MaxPhyMode = PHY_11G;
 
-#ifdef DOT11_N_SUPPORT
 		MaxPhyMode = PHY_11N_5G;
-#endif // DOT11_N_SUPPORT //
 
 		if (WirelessMode <= MaxPhyMode)
 		{
 			RTMPSetPhyMode(pAd, WirelessMode);
-#ifdef DOT11_N_SUPPORT
+
 			if (WirelessMode >= PHY_11ABGN_MIXED)
 			{
 				pAd->CommonCfg.BACapability.field.AutoBA = TRUE;
@@ -379,7 +354,7 @@ INT	Set_WirelessMode_Proc(
 				pAd->CommonCfg.BACapability.field.AutoBA = FALSE;
 				pAd->CommonCfg.REGBACapability.field.AutoBA = FALSE;
 			}
-#endif // DOT11_N_SUPPORT //
+
 			// Set AdhocMode rates
 			if (pAd->StaCfg.BssType == BSS_ADHOC)
 			{
@@ -393,14 +368,11 @@ INT	Set_WirelessMode_Proc(
 			success = FALSE;
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// it is needed to set SSID to take effect
 	if (success == TRUE)
 	{
-#ifdef DOT11_N_SUPPORT
 		SetCommonHT(pAd);
-#endif // DOT11_N_SUPPORT //
 		DBGPRINT(RT_DEBUG_TRACE, ("Set_WirelessMode_Proc::(=%ld)\n", WirelessMode));
 	}
 	else
@@ -431,14 +403,11 @@ INT	Set_Channel_Proc(
 	// check if this channel is valid
 	if (ChannelSanity(pAd, Channel) == TRUE)
 	{
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			pAd->CommonCfg.Channel = Channel;
 
 			if (MONITOR_ON(pAd))
 			{
-#ifdef DOT11_N_SUPPORT
 				N_ChannelCheck(pAd);
 				if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED &&
 					pAd->CommonCfg.RegTransmitSetting.field.BW == BW_40)
@@ -450,7 +419,6 @@ INT	Set_Channel_Proc(
 								pAd->CommonCfg.Channel, pAd->CommonCfg.CentralChannel));
 				}
 				else
-#endif // DOT11_N_SUPPORT //
 				{
 					AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
 					AsicLockChannel(pAd, pAd->CommonCfg.Channel);
@@ -458,16 +426,11 @@ INT	Set_Channel_Proc(
 				}
 			}
 		}
-#endif // CONFIG_STA_SUPPORT //
 		success = TRUE;
 	}
 	else
 	{
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			success = FALSE;
-#endif // CONFIG_STA_SUPPORT //
+		success = FALSE;
 	}
 
 
@@ -523,14 +486,10 @@ INT	Set_TxPower_Proc(
 	TxPower = (ULONG) simple_strtol(arg, 0, 10);
 	if (TxPower <= 100)
 	{
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			pAd->CommonCfg.TxPowerDefault = TxPower;
 			pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault;
 		}
-#endif // CONFIG_STA_SUPPORT //
 		success = TRUE;
 	}
 	else
@@ -595,22 +554,16 @@ INT	Set_TxPreamble_Proc(
 	{
 		case Rt802_11PreambleShort:
 			pAd->CommonCfg.TxPreamble = Preamble;
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				MlmeSetTxPreamble(pAd, Rt802_11PreambleShort);
-#endif // CONFIG_STA_SUPPORT //
+
+			MlmeSetTxPreamble(pAd, Rt802_11PreambleShort);
 			break;
 		case Rt802_11PreambleLong:
-#ifdef CONFIG_STA_SUPPORT
 		case Rt802_11PreambleAuto:
 			// if user wants AUTO, initialize to LONG here, then change according to AP's
 			// capability upon association.
-#endif // CONFIG_STA_SUPPORT //
 			pAd->CommonCfg.TxPreamble = Preamble;
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				MlmeSetTxPreamble(pAd, Rt802_11PreambleLong);
-#endif // CONFIG_STA_SUPPORT //
+
+			MlmeSetTxPreamble(pAd, Rt802_11PreambleLong);
 			break;
 		default: //Invalid argument
 			return FALSE;
@@ -639,10 +592,8 @@ INT	Set_RTSThreshold_Proc(
 
 	if((RtsThresh > 0) && (RtsThresh <= MAX_RTS_THRESHOLD))
 		pAd->CommonCfg.RtsThreshold  = (USHORT)RtsThresh;
-#ifdef CONFIG_STA_SUPPORT
 	else if (RtsThresh == 0)
 		pAd->CommonCfg.RtsThreshold = MAX_RTS_THRESHOLD;
-#endif // CONFIG_STA_SUPPORT //
 	else
 		return FALSE; //Invalid argument
 
@@ -683,15 +634,12 @@ INT	Set_FragThreshold_Proc(
 		pAd->CommonCfg.FragmentThreshold = (USHORT)FragThresh;
 	}
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (pAd->CommonCfg.FragmentThreshold == MAX_FRAG_THRESHOLD)
 			pAd->CommonCfg.bUseZeroToDisableFragment = TRUE;
 		else
 			pAd->CommonCfg.bUseZeroToDisableFragment = FALSE;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	DBGPRINT(RT_DEBUG_TRACE, ("Set_FragThreshold_Proc::(FragThreshold=%d)\n", pAd->CommonCfg.FragmentThreshold));
 
@@ -814,6 +762,7 @@ INT	Show_DescInfo_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	IN	PUCHAR			arg)
 {
+#ifdef RT2860
 	INT i, QueIdx=0;
 	PRT28XX_RXD_STRUC pRxD;
     PTXD_STRUC pTxD;
@@ -844,7 +793,7 @@ INT	Show_DescInfo_Proc(
 	    hex_dump("Rx Descriptor", (char *)pRxD, 16);
 		printk("pRxD->DDONE = %x\n", pRxD->DDONE);
 	}
-
+#endif /* RT2860 */
 	return TRUE;
 }
 
@@ -912,7 +861,6 @@ BOOLEAN RTMPCheckStrPrintAble(
 
 	========================================================================
 */
-#ifdef CONFIG_STA_SUPPORT
 VOID    RTMPSetDesiredRates(
     IN  PRTMP_ADAPTER   pAdapter,
     IN  LONG            Rates)
@@ -1125,10 +1073,7 @@ NDIS_STATUS RTMPWPARemoveKeyProc(
 
 	return (Status);
 }
-#endif // CONFIG_STA_SUPPORT //
-
 
-#ifdef CONFIG_STA_SUPPORT
 /*
 	========================================================================
 
@@ -1178,7 +1123,6 @@ VOID	RTMPWPARemoveAllKeys(
 	}
 
 }
-#endif // CONFIG_STA_SUPPORT //
 
 /*
 	========================================================================
@@ -1202,19 +1146,11 @@ VOID	RTMPSetPhyMode(
 	INT i;
 	// the selected phymode must be supported by the RF IC encoded in E2PROM
 
-	// if no change, do nothing
-	/* bug fix
-	if (pAd->CommonCfg.PhyMode == phymode)
-		return;
-    */
 	pAd->CommonCfg.PhyMode = (UCHAR)phymode;
 
 	DBGPRINT(RT_DEBUG_TRACE,("RTMPSetPhyMode : PhyMode=%d, channel=%d \n", pAd->CommonCfg.PhyMode, pAd->CommonCfg.Channel));
-#ifdef EXT_BUILD_CHANNEL_LIST
-	BuildChannelListEx(pAd);
-#else
+
 	BuildChannelList(pAd);
-#endif // EXT_BUILD_CHANNEL_LIST //
 
 	// sanity check user setting
 	for (i = 0; i < pAd->ChannelListNum; i++)
@@ -1225,10 +1161,7 @@ VOID	RTMPSetPhyMode(
 
 	if (i == pAd->ChannelListNum)
 	{
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			pAd->CommonCfg.Channel = FirstChannel(pAd);
-#endif // CONFIG_STA_SUPPORT //
+		pAd->CommonCfg.Channel = FirstChannel(pAd);
 		DBGPRINT(RT_DEBUG_ERROR, ("RTMPSetPhyMode: channel is out of range, use first channel=%d \n", pAd->CommonCfg.Channel));
 	}
 
@@ -1253,12 +1186,10 @@ VOID	RTMPSetPhyMode(
 		case PHY_11G:
 		case PHY_11BG_MIXED:
 		case PHY_11ABG_MIXED:
-#ifdef DOT11_N_SUPPORT
 		case PHY_11N_2_4G:
 		case PHY_11ABGN_MIXED:
 		case PHY_11BGN_MIXED:
 		case PHY_11GN_MIXED:
-#endif // DOT11_N_SUPPORT //
 			pAd->CommonCfg.SupRate[0]  = 0x82;	  // 1 mbps, in units of 0.5 Mbps, basic rate
 			pAd->CommonCfg.SupRate[1]  = 0x84;	  // 2 mbps, in units of 0.5 Mbps, basic rate
 			pAd->CommonCfg.SupRate[2]  = 0x8B;	  // 5.5 mbps, in units of 0.5 Mbps, basic rate
@@ -1288,11 +1219,9 @@ VOID	RTMPSetPhyMode(
 			break;
 
 		case PHY_11A:
-#ifdef DOT11_N_SUPPORT
 		case PHY_11AN_MIXED:
 		case PHY_11AGN_MIXED:
 		case PHY_11N_5G:
-#endif // DOT11_N_SUPPORT //
 			pAd->CommonCfg.SupRate[0]  = 0x8C;	  // 6 mbps, in units of 0.5 Mbps, basic rate
 			pAd->CommonCfg.SupRate[1]  = 0x12;	  // 9 mbps, in units of 0.5 Mbps
 			pAd->CommonCfg.SupRate[2]  = 0x98;	  // 12 mbps, in units of 0.5 Mbps, basic rate
@@ -1322,8 +1251,6 @@ VOID	RTMPSetPhyMode(
 	pAd->CommonCfg.BandState = UNKNOWN_BAND;
 }
 
-
-#ifdef DOT11_N_SUPPORT
 /*
 	========================================================================
 	Routine Description:
@@ -1492,6 +1419,16 @@ VOID	RTMPSetHT(
 		pAd->CommonCfg.DesiredHtPhy.RxSTBC = 0;
 	}
 
+#ifndef RT30xx
+#ifdef RT2870
+	/* Frank recommend ,If not, Tx maybe block in high power. Rx has no problem*/
+	if(IS_RT3070(pAd) && ((pAd->RfIcType == RFIC_3020) || (pAd->RfIcType == RFIC_2020)))
+	{
+		pAd->CommonCfg.HtCapability.HtCapInfo.TxSTBC = 0;
+		pAd->CommonCfg.DesiredHtPhy.TxSTBC = 0;
+	}
+#endif // RT2870 //
+#endif
 
 	if(pHTPhyMode->SHORTGI == GI_400)
 	{
@@ -1539,14 +1476,7 @@ VOID	RTMPSetHT(
 	}
 	AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm);
 
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		RTMPSetIndividualHT(pAd, 0);
-	}
-#endif // CONFIG_STA_SUPPORT //
-
+	RTMPSetIndividualHT(pAd, 0);
 }
 
 /*
@@ -1571,16 +1501,12 @@ VOID	RTMPSetIndividualHT(
 
 	do
 	{
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			pDesired_ht_phy = &pAd->StaCfg.DesiredHtPhyInfo;
 			DesiredMcs = pAd->StaCfg.DesiredTransmitSetting.field.MCS;
 			//pAd->StaCfg.bAutoTxRateSwitch = (DesiredMcs == MCS_AUTO) ? TRUE : FALSE;
 				break;
 		}
-#endif // CONFIG_STA_SUPPORT //
 	} while (FALSE);
 
 	if (pDesired_ht_phy == NULL)
@@ -1710,7 +1636,6 @@ VOID	RTMPUpdateHTIE(
 
         DBGPRINT(RT_DEBUG_TRACE,("RTMPUpdateHTIE <== \n"));
 }
-#endif // DOT11_N_SUPPORT //
 
 /*
 	========================================================================
@@ -1732,8 +1657,6 @@ VOID	RTMPAddWcidAttributeEntry(
 	USHORT		Wcid = 0;
 
 	{
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			if (BssIdx > BSS0)
 			{
@@ -1748,39 +1671,22 @@ VOID	RTMPAddWcidAttributeEntry(
 				Wcid = pEntry->Aid;
 			else if (pEntry && INFRA_ON(pAd))
 			{
-#ifdef QOS_DLS_SUPPORT
-				if (pEntry->ValidAsDls == TRUE)
-					Wcid = pEntry->Aid;
-				else
-#endif // QOS_DLS_SUPPORT //
 				Wcid = BSSID_WCID;
 			}
 			else
 				Wcid = MCAST_WCID;
 		}
-#endif // CONFIG_STA_SUPPORT //
 	}
 
 	// Update WCID attribute table
 	offset = MAC_WCID_ATTRIBUTE_BASE + (Wcid * HW_WCID_ATTRI_SIZE);
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (pEntry && pEntry->ValidAsMesh)
 			WCIDAttri = (CipherAlg<<1) | PAIRWISEKEYTABLE;
-#ifdef QOS_DLS_SUPPORT
-		else if ((pEntry) && (pEntry->ValidAsDls) &&
-					((CipherAlg == CIPHER_TKIP) ||
-				 	(CipherAlg == CIPHER_TKIP_NO_MIC) ||
-					(CipherAlg == CIPHER_AES) ||
-				 	(CipherAlg == CIPHER_NONE)))
-			WCIDAttri = (CipherAlg<<1) | PAIRWISEKEYTABLE;
-#endif // QOS_DLS_SUPPORT //
 		else
 			WCIDAttri = (CipherAlg<<1) | SHAREDKEYTABLE;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	RTMP_IO_WRITE32(pAd, offset, WCIDAttri);
 
@@ -1801,7 +1707,12 @@ VOID	RTMPAddWcidAttributeEntry(
 	}
 
 	// For key index and ext IV bit, so only need to update the position(offset+3).
+#ifdef RT2860
 	RTMP_IO_WRITE8(pAd, offset+3, IVEIV);
+#endif
+#ifdef RT2870
+	RTUSBMultiWrite_OneByte(pAd, offset+3, &IVEIV);
+#endif // RT2870 //
 
 	DBGPRINT(RT_DEBUG_TRACE,("RTMPAddWcidAttributeEntry: WCID #%d, KeyIndex #%d, Alg=%s\n",Wcid, KeyIdx, CipherName[CipherAlg]));
 	DBGPRINT(RT_DEBUG_TRACE,("	WCIDAttri = 0x%x \n",  WCIDAttri));
@@ -1864,7 +1775,6 @@ CHAR *GetAuthMode(CHAR auth)
     	return "UNKNOW";
 }
 
-#if 1 //#ifndef UCOS
 /*
     ==========================================================================
     Description:
@@ -1912,11 +1822,10 @@ VOID RTMPIoctlGetSiteSurvey(
 	    "Ch", "SSID", "BSSID", "Enc", "Auth", "Siganl(%)", "W-Mode", " NT");
 
 	WaitCnt = 0;
-#ifdef CONFIG_STA_SUPPORT
 	pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE;
+
 	while ((ScanRunning(pAdapter) == TRUE) && (WaitCnt++ < 200))
 		OS_WAIT(500);
-#endif // CONFIG_STA_SUPPORT //
 
 	for(i=0; i<pAdapter->ScanTab.BssNr ;i++)
 	{
@@ -1982,9 +1891,7 @@ VOID RTMPIoctlGetSiteSurvey(
         sprintf(msg+strlen(msg),"\n");
 	}
 
-#ifdef CONFIG_STA_SUPPORT
 	pAdapter->StaCfg.bScanReqIsFromWebUI = FALSE;
-#endif // CONFIG_STA_SUPPORT //
 	wrq->u.data.length = strlen(msg);
 	Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
 
@@ -2010,9 +1917,7 @@ VOID RTMPIoctlGetMacTable(
 			COPY_MAC_ADDR(MacTab.Entry[MacTab.Num].Addr, &pAd->MacTab.Content[i].Addr);
 			MacTab.Entry[MacTab.Num].Aid = (UCHAR)pAd->MacTab.Content[i].Aid;
 			MacTab.Entry[MacTab.Num].Psm = pAd->MacTab.Content[i].PsMode;
-#ifdef DOT11_N_SUPPORT
 			MacTab.Entry[MacTab.Num].MimoPs = pAd->MacTab.Content[i].MmpsMode;
-#endif // DOT11_N_SUPPORT //
 
 			// Fill in RSSI per entry
 			MacTab.Entry[MacTab.Num].AvgRssi0 = pAd->MacTab.Content[i].RssiSample.AvgRssi0;
@@ -2072,9 +1977,7 @@ VOID RTMPIoctlGetMacTable(
 
 	kfree(msg);
 }
-#endif // UCOS //
 
-#ifdef DOT11_N_SUPPORT
 INT	Set_BASetup_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	IN	PUCHAR			arg)
@@ -2089,7 +1992,6 @@ INT	Set_BASetup_Proc(
 		=>The six 2 digit hex-decimal number previous are the Mac address,
 		=>The seventh decimal number is the tid value.
 */
-	//printk("\n%s\n", arg);
 
 	if(strlen(arg) < 19)  //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and tid value in decimal format.
 		return FALSE;
@@ -2283,9 +2185,7 @@ INT	Set_HtMcs_Proc(
 	IN	PUCHAR			arg)
 {
 	ULONG HtMcs, Mcs_tmp;
-#ifdef CONFIG_STA_SUPPORT
     BOOLEAN bAutoRate = FALSE;
-#endif // CONFIG_STA_SUPPORT //
 
 	Mcs_tmp = simple_strtol(arg, 0, 10);
 
@@ -2294,8 +2194,6 @@ INT	Set_HtMcs_Proc(
 	else
 		HtMcs = MCS_AUTO;
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		pAd->StaCfg.DesiredTransmitSetting.field.MCS = HtMcs;
 		pAd->StaCfg.bAutoTxRateSwitch = (HtMcs == MCS_AUTO) ? TRUE:FALSE;
@@ -2330,7 +2228,6 @@ INT	Set_HtMcs_Proc(
         if (ADHOC_ON(pAd))
             return TRUE;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	SetCommonHT(pAd);
 
@@ -2592,13 +2489,26 @@ INT	Set_HtAutoBa_Proc(
 
 	Value = simple_strtol(arg, 0, 10);
 	if (Value == 0)
+	{
 		pAd->CommonCfg.BACapability.field.AutoBA = FALSE;
+#ifdef RT30xx
+		pAd->CommonCfg.BACapability.field.Policy = BA_NOTUSE;
+#endif
+	}
     else if (Value == 1)
+	{
 		pAd->CommonCfg.BACapability.field.AutoBA = TRUE;
+#ifdef RT30xx
+		pAd->CommonCfg.BACapability.field.Policy = IMMED_BA;
+#endif
+	}
 	else
 		return FALSE; //Invalid argument
 
     pAd->CommonCfg.REGBACapability.field.AutoBA = pAd->CommonCfg.BACapability.field.AutoBA;
+#ifdef RT30xx
+    pAd->CommonCfg.REGBACapability.field.Policy = pAd->CommonCfg.BACapability.field.Policy;
+#endif
 	SetCommonHT(pAd);
 
 	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtAutoBa_Proc::(HtAutoBa=%d)\n",pAd->CommonCfg.BACapability.field.AutoBA));
@@ -2762,10 +2672,7 @@ INT	Set_HtMimoPs_Proc(
 
 	return TRUE;
 }
-#endif // DOT11_N_SUPPORT //
-
 
-#ifdef DOT11_N_SUPPORT
 INT	SetCommonHT(
 	IN	PRTMP_ADAPTER	pAd)
 {
@@ -2787,7 +2694,6 @@ INT	SetCommonHT(
 
 	return TRUE;
 }
-#endif // DOT11_N_SUPPORT //
 
 INT	Set_FixedTxMode_Proc(
 	IN	PRTMP_ADAPTER	pAd,
@@ -2804,45 +2710,13 @@ INT	Set_FixedTxMode_Proc(
         fix_tx_mode = FIXED_TXMODE_CCK;
 	}
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode = fix_tx_mode;
-#endif // CONFIG_STA_SUPPORT //
+	pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode = fix_tx_mode;
 
 	DBGPRINT(RT_DEBUG_TRACE, ("Set_FixedTxMode_Proc::(FixedTxMode=%d)\n", fix_tx_mode));
 
 	return TRUE;
 }
 
-#ifdef CONFIG_APSTA_MIXED_SUPPORT
-INT	Set_OpMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("Can not switch operate mode on interface up !! \n"));
-		return FALSE;
-	}
-
-	if (Value == 0)
-		pAd->OpMode = OPMODE_STA;
-	else if (Value == 1)
-		pAd->OpMode = OPMODE_AP;
-	else
-		return FALSE; //Invalid argument
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_OpMode_Proc::(OpMode=%s)\n", pAd->OpMode == 1 ? "AP Mode" : "STA Mode"));
-
-	return TRUE;
-}
-#endif // CONFIG_APSTA_MIXED_SUPPORT //
-
-
 /////////////////////////////////////////////////////////////////////////
 PCHAR   RTMPGetRalinkAuthModeStr(
     IN  NDIS_802_11_AUTHENTICATION_MODE authMode)
@@ -2851,7 +2725,9 @@ PCHAR   RTMPGetRalinkAuthModeStr(
 	{
 		case Ndis802_11AuthModeOpen:
 			return "OPEN";
+#if defined(RT2860) || defined(RT30xx)
         default:
+#endif
 		case Ndis802_11AuthModeWPAPSK:
 			return "WPAPSK";
 		case Ndis802_11AuthModeShared:
@@ -2866,8 +2742,14 @@ PCHAR   RTMPGetRalinkAuthModeStr(
 			return "WPAPSKWPA2PSK";
         case Ndis802_11AuthModeWPA1WPA2:
 			return "WPA1WPA2";
+#ifndef RT30xx
 		case Ndis802_11AuthModeWPANone:
 			return "WPANONE";
+#ifdef RT2870
+		default:
+			return "UNKNOW";
+#endif
+#endif
 	}
 }
 
@@ -2876,7 +2758,9 @@ PCHAR   RTMPGetRalinkEncryModeStr(
 {
 	switch(encryMode)
 	{
+#if defined(RT2860) || defined(RT30xx)
 	    default:
+#endif
 		case Ndis802_11WEPDisabled:
 			return "NONE";
 		case Ndis802_11WEPEnabled:
@@ -2887,6 +2771,10 @@ PCHAR   RTMPGetRalinkEncryModeStr(
 			return "AES";
         case Ndis802_11Encryption4Enabled:
 			return "TKIPAES";
+#if !defined(RT2860) && !defined(RT30xx)
+		default:
+			return "UNKNOW";
+#endif
 	}
 }
 
@@ -2911,7 +2799,7 @@ INT RTMPShowCfgValue(
 	{
 		sprintf(pBuf, "\n");
 		for (PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC = RTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC++)
-			sprintf(pBuf, "%s%s\n", pBuf, PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name);
+			sprintf(pBuf + strlen(pBuf), "%s\n", PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name);
 	}
 
 	return Status;
@@ -2921,11 +2809,7 @@ INT	Show_SSID_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	OUT	PUCHAR			pBuf)
 {
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		sprintf(pBuf, "\t%s", pAd->CommonCfg.Ssid);
-#endif // CONFIG_STA_SUPPORT //
+	sprintf(pBuf, "\t%s", pAd->CommonCfg.Ssid);
 	return 0;
 }
 
@@ -2950,7 +2834,6 @@ INT	Show_WirelessMode_Proc(
 		case PHY_11G:
 			sprintf(pBuf, "\t11G");
 			break;
-#ifdef DOT11_N_SUPPORT
 		case PHY_11ABGN_MIXED:
 			sprintf(pBuf, "\t11A/B/G/N");
 			break;
@@ -2972,7 +2855,6 @@ INT	Show_WirelessMode_Proc(
 		case PHY_11N_5G:
 			sprintf(pBuf, "\t11N only with 5G");
 			break;
-#endif // DOT11_N_SUPPORT //
 		default:
 			sprintf(pBuf, "\tUnknow Value(%d)", pAd->CommonCfg.PhyMode);
 			break;
@@ -3066,7 +2948,6 @@ INT	Show_FragThreshold_Proc(
 	return 0;
 }
 
-#ifdef DOT11_N_SUPPORT
 INT	Show_HtBw_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	OUT	PUCHAR			pBuf)
@@ -3086,11 +2967,7 @@ INT	Show_HtMcs_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	OUT	PUCHAR			pBuf)
 {
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		sprintf(pBuf, "\t%u", pAd->StaCfg.DesiredTransmitSetting.field.MCS);
-#endif // CONFIG_STA_SUPPORT //
+	sprintf(pBuf, "\t%u", pAd->StaCfg.DesiredTransmitSetting.field.MCS);
 	return 0;
 }
 
@@ -3191,7 +3068,6 @@ INT	Show_HtAutoBa_Proc(
 	sprintf(pBuf, "\t%s", pAd->CommonCfg.BACapability.field.AutoBA ? "TRUE":"FALSE");
 	return 0;
 }
-#endif // DOT11_N_SUPPORT //
 
 INT	Show_CountryRegion_Proc(
 	IN	PRTMP_ADAPTER	pAd,
@@ -3232,11 +3108,7 @@ INT	Show_WmmCapable_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	OUT	PUCHAR			pBuf)
 {
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		sprintf(pBuf, "\t%s", pAd->CommonCfg.bWmmCapable ? "TRUE":"FALSE");
-#endif // CONFIG_STA_SUPPORT //
+	sprintf(pBuf, "\t%s", pAd->CommonCfg.bWmmCapable ? "TRUE":"FALSE");
 
 	return 0;
 }
@@ -3250,7 +3122,6 @@ INT	Show_IEEE80211H_Proc(
 	return 0;
 }
 
-#ifdef CONFIG_STA_SUPPORT
 INT	Show_NetworkType_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	OUT	PUCHAR			pBuf)
@@ -3275,7 +3146,6 @@ INT	Show_NetworkType_Proc(
 	}
 	return 0;
 }
-#endif // CONFIG_STA_SUPPORT //
 
 INT	Show_AuthMode_Proc(
 	IN	PRTMP_ADAPTER	pAd,
@@ -3283,10 +3153,7 @@ INT	Show_AuthMode_Proc(
 {
 	NDIS_802_11_AUTHENTICATION_MODE	AuthMode = Ndis802_11AuthModeOpen;
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		AuthMode = pAd->StaCfg.AuthMode;
-#endif // CONFIG_STA_SUPPORT //
+	AuthMode = pAd->StaCfg.AuthMode;
 
 	if ((AuthMode >= Ndis802_11AuthModeOpen) &&
 		(AuthMode <= Ndis802_11AuthModeWPA1PSKWPA2PSK))
@@ -3303,10 +3170,7 @@ INT	Show_EncrypType_Proc(
 {
 	NDIS_802_11_WEP_STATUS	WepStatus = Ndis802_11WEPDisabled;
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		WepStatus = pAd->StaCfg.WepStatus;
-#endif // CONFIG_STA_SUPPORT //
+	WepStatus = pAd->StaCfg.WepStatus;
 
 	if ((WepStatus >= Ndis802_11WEPEnabled) &&
 		(WepStatus <= Ndis802_11Encryption4KeyAbsent))
@@ -3323,10 +3187,7 @@ INT	Show_DefaultKeyID_Proc(
 {
 	UCHAR DefaultKeyId = 0;
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		DefaultKeyId = pAd->StaCfg.DefaultKeyId;
-#endif // CONFIG_STA_SUPPORT //
+	DefaultKeyId = pAd->StaCfg.DefaultKeyId;
 
 	sprintf(pBuf, "\t%d", DefaultKeyId);
 
@@ -3396,11 +3257,7 @@ INT	Show_WPAPSK_Proc(
 	INT 	idx;
 	UCHAR	PMK[32] = {0};
 
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		NdisMoveMemory(PMK, pAd->StaCfg.PMK, 32);
-#endif // CONFIG_STA_SUPPORT //
+	NdisMoveMemory(PMK, pAd->StaCfg.PMK, 32);
 
     sprintf(pBuf, "\tPMK = ");
     for (idx = 0; idx < 32; idx++)
diff --git a/drivers/staging/rt2860/common/cmm_sanity.c b/drivers/staging/rt2860/common/cmm_sanity.c
index b0f070d4313..843e44e41ab 100644
--- a/drivers/staging/rt2860/common/cmm_sanity.c
+++ b/drivers/staging/rt2860/common/cmm_sanity.c
@@ -275,9 +275,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
     OUT PQOS_CAPABILITY_PARM pQosCapability,
     OUT ULONG *pRalinkIe,
     OUT UCHAR		 *pHtCapabilityLen,
-#ifdef CONFIG_STA_SUPPORT
     OUT UCHAR		 *pPreNHtCapabilityLen,
-#endif // CONFIG_STA_SUPPORT //
     OUT HT_CAPABILITY_IE *pHtCapability,
 	OUT UCHAR		 *AddHtInfoLen,
 	OUT ADD_HT_INFO_IE *AddHtInfo,
@@ -286,9 +284,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
     OUT	PNDIS_802_11_VARIABLE_IEs pVIE)
 {
     CHAR				*Ptr;
-#ifdef CONFIG_STA_SUPPORT
 	CHAR 				TimLen;
-#endif // CONFIG_STA_SUPPORT //
     PFRAME_802_11		pFrame;
     PEID_STRUCT         pEid;
     UCHAR				SubType;
@@ -316,10 +312,8 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
     *pAironetCellPowerLimit = 0xFF;  // Default of AironetCellPowerLimit is 0xFF
     *LengthVIE = 0;					// Set the length of VIE to init value 0
     *pHtCapabilityLen = 0;					// Set the length of VIE to init value 0
-#ifdef CONFIG_STA_SUPPORT
 	if (pAd->OpMode == OPMODE_STA)
 		*pPreNHtCapabilityLen = 0;					// Set the length of VIE to init value 0
-#endif // CONFIG_STA_SUPPORT //
     *AddHtInfoLen = 0;					// Set the length of VIE to init value 0
     *pRalinkIe = 0;
     *pNewChannel = 0;
@@ -428,8 +422,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
 				*(USHORT *)(&pHtCapability->HtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->HtCapInfo));
 				*(USHORT *)(&pHtCapability->ExtHtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->ExtHtCapInfo));
 
-#ifdef CONFIG_STA_SUPPORT
-				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				{
 					*pPreNHtCapabilityLen = 0;	// Nnow we only support 26 bytes.
 
@@ -437,7 +429,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
 					NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid, pEid->Len + 2);
 					*LengthVIE += (pEid->Len + 2);
 				}
-#endif // CONFIG_STA_SUPPORT //
 			}
 			else
 			{
@@ -458,14 +449,11 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
 				*(USHORT *)(&AddHtInfo->AddHtInfo2) = cpu2le16(*(USHORT *)(&AddHtInfo->AddHtInfo2));
 				*(USHORT *)(&AddHtInfo->AddHtInfo3) = cpu2le16(*(USHORT *)(&AddHtInfo->AddHtInfo3));
 
-#ifdef CONFIG_STA_SUPPORT
-				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				{
 			                Ptr = (PUCHAR) pVIE;
 			                NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid, pEid->Len + 2);
 			                *LengthVIE += (pEid->Len + 2);
 				}
-#endif // CONFIG_STA_SUPPORT //
 			}
 			else
 			{
@@ -492,8 +480,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
                 if(pEid->Len == 1)
                 {
                     *pChannel = *pEid->Octet;
-#ifdef CONFIG_STA_SUPPORT
-					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+
 					{
 						if (ChannelSanity(pAd, *pChannel) == 0)
 						{
@@ -501,7 +488,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
 							return FALSE;
 						}
 					}
-#endif // CONFIG_STA_SUPPORT //
+
                     Sanity |= 0x4;
                 }
                 else
@@ -539,14 +526,13 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
                 }
                 break;
 
-#ifdef CONFIG_STA_SUPPORT
             case IE_TIM:
                 if(INFRA_ON(pAd) && SubType == SUBTYPE_BEACON)
                 {
                     GetTimBit((PUCHAR)pEid, pAd->StaActive.Aid, &TimLen, pBcastFlag, pDtimCount, pDtimPeriod, pMessageToMe);
                 }
                 break;
-#endif // CONFIG_STA_SUPPORT //
+
             case IE_CHANNEL_SWITCH_ANNOUNCEMENT:
                 if(pEid->Len == 3)
                 {
@@ -568,8 +554,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
         			else
         				*pRalinkIe = 0xf0000000; // Set to non-zero value (can't set bit0-2) to represent this is Ralink Chip. So at linkup, we will set ralinkchip flag.
                 }
-#ifdef CONFIG_STA_SUPPORT
-#ifdef DOT11_N_SUPPORT
 		// This HT IE is before IEEE draft set HT IE value.2006-09-28 by Jan.
 
                 // Other vendors had production before IE_HT_CAP value is assigned. To backward support those old-firmware AP,
@@ -588,8 +572,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
                         *AddHtInfoLen = SIZE_ADD_HT_INFO_IE;
                     }
                 }
-#endif // DOT11_N_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
                 else if (NdisEqualMemory(pEid->Octet, WPA_OUI, 4))
                 {
                     // Copy to pVIE which will report to microsoft bssid list.
@@ -712,15 +694,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
                     *LengthVIE += (pEid->Len + 2);
                 }
                 break;
-#ifdef CONFIG_STA_SUPPORT
-#ifdef EXT_BUILD_CHANNEL_LIST
-			case IE_COUNTRY:
-				Ptr = (PUCHAR) pVIE;
-                NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid, pEid->Len + 2);
-                *LengthVIE += (pEid->Len + 2);
-				break;
-#endif // EXT_BUILD_CHANNEL_LIST //
-#endif // CONFIG_STA_SUPPORT //
 
             default:
                 break;
@@ -731,8 +704,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
     }
 
     // For some 11a AP. it did not have the channel EID, patch here
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		UCHAR LatchRfChannel = MsgChannel;
 		if ((pAd->LatchRfRegs.Channel > 14) && ((Sanity & 0x4) == 0))
@@ -744,7 +715,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
 			Sanity |= 0x4;
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	if (Sanity != 0x7)
 	{
@@ -758,76 +728,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
 
 }
 
-#ifdef DOT11N_DRAFT3
-/*
-	==========================================================================
-	Description:
-		MLME message sanity check for some IE addressed  in 802.11n d3.03.
-	Return:
-		TRUE if all parameters are OK, FALSE otherwise
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-BOOLEAN PeerBeaconAndProbeRspSanity2(
-	IN PRTMP_ADAPTER pAd,
-	IN VOID *Msg,
-	IN ULONG MsgLen,
-	OUT UCHAR 	*RegClass)
-{
-	CHAR				*Ptr;
-	PFRAME_802_11		pFrame;
-	PEID_STRUCT			pEid;
-	ULONG				Length = 0;
-
-	pFrame = (PFRAME_802_11)Msg;
-
-	*RegClass = 0;
-	Ptr = pFrame->Octet;
-	Length += LENGTH_802_11;
-
-	// get timestamp from payload and advance the pointer
-	Ptr += TIMESTAMP_LEN;
-	Length += TIMESTAMP_LEN;
-
-	// get beacon interval from payload and advance the pointer
-	Ptr += 2;
-	Length += 2;
-
-	// get capability info from payload and advance the pointer
-	Ptr += 2;
-	Length += 2;
-
-	pEid = (PEID_STRUCT) Ptr;
-
-	// get variable fields from payload and advance the pointer
-	while ((Length + 2 + pEid->Len) <= MsgLen)
-	{
-		switch(pEid->Eid)
-		{
-			case IE_SUPP_REG_CLASS:
-				if(pEid->Len > 0)
-				{
-					*RegClass = *pEid->Octet;
-				}
-				else
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("PeerBeaconAndProbeRspSanity - wrong IE_SSID (len=%d)\n",pEid->Len));
-					return FALSE;
-				}
-				break;
-		}
-
-		Length = Length + 2 + pEid->Len;  // Eid[1] + Len[1]+ content[Len]
-		pEid = (PEID_STRUCT)((UCHAR*)pEid + 2 + pEid->Len);
-	}
-
-	return TRUE;
-
-}
-#endif // DOT11N_DRAFT3 //
-
 /*
     ==========================================================================
     Description:
@@ -855,10 +755,8 @@ BOOLEAN MlmeScanReqSanity(
 
 	if ((*pBssType == BSS_INFRA || *pBssType == BSS_ADHOC || *pBssType == BSS_ANY)
 		&& (*pScanType == SCAN_ACTIVE || *pScanType == SCAN_PASSIVE
-#ifdef CONFIG_STA_SUPPORT
 		|| *pScanType == SCAN_CISCO_PASSIVE || *pScanType == SCAN_CISCO_ACTIVE
 		|| *pScanType == SCAN_CISCO_CHANNEL_LOAD || *pScanType == SCAN_CISCO_NOISE
-#endif // CONFIG_STA_SUPPORT //
 		))
 	{
 		return TRUE;
@@ -940,9 +838,6 @@ BOOLEAN PeerAuthSanity(
     NdisMoveMemory(pStatus, &pFrame->Octet[4], 2);
 
     if ((*pAlg == Ndis802_11AuthModeOpen)
-#ifdef LEAP_SUPPORT
-      || (*pAlg == CISCO_AuthModeLEAP)
-#endif // LEAP_SUPPORT //
       )
     {
         if (*pSeq == 1 || *pSeq == 2)
@@ -1003,9 +898,6 @@ BOOLEAN MlmeAuthReqSanity(
     *pAlg = pInfo->Alg;
 
     if (((*pAlg == Ndis802_11AuthModeShared) ||(*pAlg == Ndis802_11AuthModeOpen)
-#ifdef LEAP_SUPPORT
-     || (*pAlg == CISCO_AuthModeLEAP)
-#endif // LEAP_SUPPORT //
      	) &&
         ((*pAddr & 0x01) == 0))
     {
@@ -1344,290 +1236,3 @@ BOOLEAN PeerWpaMessageSanity(
 	return TRUE;
 
 }
-
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-BOOLEAN MlmeDlsReqSanity(
-	IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PRT_802_11_DLS *pDLS,
-    OUT PUSHORT pReason)
-{
-	MLME_DLS_REQ_STRUCT *pInfo;
-
-    pInfo = (MLME_DLS_REQ_STRUCT *)Msg;
-
-	*pDLS = pInfo->pDLS;
-	*pReason = pInfo->Reason;
-
-	return TRUE;
-}
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef QOS_DLS_SUPPORT
-BOOLEAN PeerDlsReqSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pDA,
-    OUT PUCHAR pSA,
-    OUT USHORT *pCapabilityInfo,
-    OUT USHORT *pDlsTimeout,
-    OUT UCHAR *pRatesLen,
-    OUT UCHAR Rates[],
-	OUT UCHAR *pHtCapabilityLen,
-    OUT HT_CAPABILITY_IE *pHtCapability)
-{
-	CHAR            *Ptr;
-    PFRAME_802_11	Fr = (PFRAME_802_11)Msg;
-	PEID_STRUCT  eid_ptr;
-
-    // to prevent caller from using garbage output value
-    *pCapabilityInfo	= 0;
-    *pDlsTimeout	= 0;
-	*pHtCapabilityLen = 0;
-
-    Ptr = Fr->Octet;
-
-	// offset to destination MAC address (Category and Action field)
-    Ptr += 2;
-
-    // get DA from payload and advance the pointer
-    NdisMoveMemory(pDA, Ptr, MAC_ADDR_LEN);
-    Ptr += MAC_ADDR_LEN;
-
-    // get SA from payload and advance the pointer
-    NdisMoveMemory(pSA, Ptr, MAC_ADDR_LEN);
-    Ptr += MAC_ADDR_LEN;
-
-    // get capability info from payload and advance the pointer
-    NdisMoveMemory(pCapabilityInfo, Ptr, 2);
-    Ptr += 2;
-
-    // get capability info from payload and advance the pointer
-    NdisMoveMemory(pDlsTimeout, Ptr, 2);
-    Ptr += 2;
-
-	// Category and Action field + DA + SA + capability + Timeout
-	eid_ptr = (PEID_STRUCT) &Fr->Octet[18];
-
-	while (((UCHAR*)eid_ptr + eid_ptr->Len + 1) < ((UCHAR*)Fr + MsgLen))
-	{
-		switch(eid_ptr->Eid)
-		{
-			case IE_SUPP_RATES:
-                if ((eid_ptr->Len <= MAX_LEN_OF_SUPPORTED_RATES) && (eid_ptr->Len > 0))
-                {
-                    NdisMoveMemory(Rates, eid_ptr->Octet, eid_ptr->Len);
-                    DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsReqSanity - IE_SUPP_RATES., Len=%d. Rates[0]=%x\n",eid_ptr->Len, Rates[0]));
-                    DBGPRINT(RT_DEBUG_TRACE, ("Rates[1]=%x %x %x %x %x %x %x\n", Rates[1], Rates[2], Rates[3], Rates[4], Rates[5], Rates[6], Rates[7]));
-                    *pRatesLen = eid_ptr->Len;
-                }
-                else
-                {
-                    *pRatesLen = 8;
-					Rates[0] = 0x82;
-					Rates[1] = 0x84;
-					Rates[2] = 0x8b;
-					Rates[3] = 0x96;
-					Rates[4] = 0x12;
-					Rates[5] = 0x24;
-					Rates[6] = 0x48;
-					Rates[7] = 0x6c;
-                    DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsReqSanity - wrong IE_SUPP_RATES., Len=%d\n",eid_ptr->Len));
-                }
-				break;
-
-			case IE_EXT_SUPP_RATES:
-                if (eid_ptr->Len + *pRatesLen <= MAX_LEN_OF_SUPPORTED_RATES)
-                {
-                    NdisMoveMemory(&Rates[*pRatesLen], eid_ptr->Octet, eid_ptr->Len);
-                    *pRatesLen = (*pRatesLen) + eid_ptr->Len;
-                }
-                else
-                {
-                    NdisMoveMemory(&Rates[*pRatesLen], eid_ptr->Octet, MAX_LEN_OF_SUPPORTED_RATES - (*pRatesLen));
-                    *pRatesLen = MAX_LEN_OF_SUPPORTED_RATES;
-                }
-				break;
-
-			case IE_HT_CAP:
-				if (eid_ptr->Len >= sizeof(HT_CAPABILITY_IE))
-				{
-					NdisMoveMemory(pHtCapability, eid_ptr->Octet, sizeof(HT_CAPABILITY_IE));
-
-					*(USHORT *)(&pHtCapability->HtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->HtCapInfo));
-					*(USHORT *)(&pHtCapability->ExtHtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->ExtHtCapInfo));
-					*pHtCapabilityLen = sizeof(HT_CAPABILITY_IE);
-
-					DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsReqSanity - IE_HT_CAP\n"));
-				}
-				else
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsReqSanity - wrong IE_HT_CAP.eid_ptr->Len = %d\n", eid_ptr->Len));
-				}
-				break;
-
-			default:
-				break;
-		}
-
-		eid_ptr = (PEID_STRUCT)((UCHAR*)eid_ptr + 2 + eid_ptr->Len);
-	}
-
-    return TRUE;
-}
-
-BOOLEAN PeerDlsRspSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pDA,
-    OUT PUCHAR pSA,
-    OUT USHORT *pCapabilityInfo,
-    OUT USHORT *pStatus,
-    OUT UCHAR *pRatesLen,
-    OUT UCHAR Rates[],
-    OUT UCHAR *pHtCapabilityLen,
-    OUT HT_CAPABILITY_IE *pHtCapability)
-{
-    CHAR            *Ptr;
-    PFRAME_802_11	Fr = (PFRAME_802_11)Msg;
-	PEID_STRUCT  eid_ptr;
-
-    // to prevent caller from using garbage output value
-    *pStatus		= 0;
-    *pCapabilityInfo	= 0;
-	*pHtCapabilityLen = 0;
-
-    Ptr = Fr->Octet;
-
-	// offset to destination MAC address (Category and Action field)
-    Ptr += 2;
-
-	// get status code from payload and advance the pointer
-    NdisMoveMemory(pStatus, Ptr, 2);
-    Ptr += 2;
-
-    // get DA from payload and advance the pointer
-    NdisMoveMemory(pDA, Ptr, MAC_ADDR_LEN);
-    Ptr += MAC_ADDR_LEN;
-
-    // get SA from payload and advance the pointer
-    NdisMoveMemory(pSA, Ptr, MAC_ADDR_LEN);
-    Ptr += MAC_ADDR_LEN;
-
-	if (pStatus == 0)
-	{
-	    // get capability info from payload and advance the pointer
-	    NdisMoveMemory(pCapabilityInfo, Ptr, 2);
-	    Ptr += 2;
-	}
-
-	// Category and Action field + status code + DA + SA + capability
-	eid_ptr = (PEID_STRUCT) &Fr->Octet[18];
-
-	while (((UCHAR*)eid_ptr + eid_ptr->Len + 1) < ((UCHAR*)Fr + MsgLen))
-	{
-		switch(eid_ptr->Eid)
-		{
-			case IE_SUPP_RATES:
-                if ((eid_ptr->Len <= MAX_LEN_OF_SUPPORTED_RATES) && (eid_ptr->Len > 0))
-                {
-                    NdisMoveMemory(Rates, eid_ptr->Octet, eid_ptr->Len);
-                    DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsRspSanity - IE_SUPP_RATES., Len=%d. Rates[0]=%x\n",eid_ptr->Len, Rates[0]));
-                    DBGPRINT(RT_DEBUG_TRACE, ("Rates[1]=%x %x %x %x %x %x %x\n", Rates[1], Rates[2], Rates[3], Rates[4], Rates[5], Rates[6], Rates[7]));
-                    *pRatesLen = eid_ptr->Len;
-                }
-                else
-                {
-                    *pRatesLen = 8;
-					Rates[0] = 0x82;
-					Rates[1] = 0x84;
-					Rates[2] = 0x8b;
-					Rates[3] = 0x96;
-					Rates[4] = 0x12;
-					Rates[5] = 0x24;
-					Rates[6] = 0x48;
-					Rates[7] = 0x6c;
-                    DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsRspSanity - wrong IE_SUPP_RATES., Len=%d\n",eid_ptr->Len));
-                }
-				break;
-
-			case IE_EXT_SUPP_RATES:
-                if (eid_ptr->Len + *pRatesLen <= MAX_LEN_OF_SUPPORTED_RATES)
-                {
-                    NdisMoveMemory(&Rates[*pRatesLen], eid_ptr->Octet, eid_ptr->Len);
-                    *pRatesLen = (*pRatesLen) + eid_ptr->Len;
-                }
-                else
-                {
-                    NdisMoveMemory(&Rates[*pRatesLen], eid_ptr->Octet, MAX_LEN_OF_SUPPORTED_RATES - (*pRatesLen));
-                    *pRatesLen = MAX_LEN_OF_SUPPORTED_RATES;
-                }
-				break;
-
-			case IE_HT_CAP:
-				if (eid_ptr->Len >= sizeof(HT_CAPABILITY_IE))
-				{
-					NdisMoveMemory(pHtCapability, eid_ptr->Octet, sizeof(HT_CAPABILITY_IE));
-
-					*(USHORT *)(&pHtCapability->HtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->HtCapInfo));
-					*(USHORT *)(&pHtCapability->ExtHtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->ExtHtCapInfo));
-					*pHtCapabilityLen = sizeof(HT_CAPABILITY_IE);
-
-					DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsRspSanity - IE_HT_CAP\n"));
-				}
-				else
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsRspSanity - wrong IE_HT_CAP.eid_ptr->Len = %d\n", eid_ptr->Len));
-				}
-				break;
-
-			default:
-				break;
-		}
-
-		eid_ptr = (PEID_STRUCT)((UCHAR*)eid_ptr + 2 + eid_ptr->Len);
-	}
-
-    return TRUE;
-}
-
-BOOLEAN PeerDlsTearDownSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pDA,
-    OUT PUCHAR pSA,
-    OUT USHORT *pReason)
-{
-    CHAR            *Ptr;
-    PFRAME_802_11	Fr = (PFRAME_802_11)Msg;
-
-    // to prevent caller from using garbage output value
-    *pReason	= 0;
-
-    Ptr = Fr->Octet;
-
-	// offset to destination MAC address (Category and Action field)
-    Ptr += 2;
-
-    // get DA from payload and advance the pointer
-    NdisMoveMemory(pDA, Ptr, MAC_ADDR_LEN);
-    Ptr += MAC_ADDR_LEN;
-
-    // get SA from payload and advance the pointer
-    NdisMoveMemory(pSA, Ptr, MAC_ADDR_LEN);
-    Ptr += MAC_ADDR_LEN;
-
-	// get reason code from payload and advance the pointer
-    NdisMoveMemory(pReason, Ptr, 2);
-    Ptr += 2;
-
-    return TRUE;
-}
-#endif // QOS_DLS_SUPPORT //
-
diff --git a/drivers/staging/rt2860/common/cmm_sync.c b/drivers/staging/rt2860/common/cmm_sync.c
index d29e0b630e2..a6e1b6ddfe5 100644
--- a/drivers/staging/rt2860/common/cmm_sync.c
+++ b/drivers/staging/rt2860/common/cmm_sync.c
@@ -95,9 +95,7 @@ VOID BuildChannelList(
 
 	// if not 11a-only mode, channel list starts from 2.4Ghz band
 	if ((pAd->CommonCfg.PhyMode != PHY_11A)
-#ifdef DOT11_N_SUPPORT
 		&& (pAd->CommonCfg.PhyMode != PHY_11AN_MIXED) && (pAd->CommonCfg.PhyMode != PHY_11N_5G)
-#endif // DOT11_N_SUPPORT //
 	)
 	{
 		switch (pAd->CommonCfg.CountryRegion  & 0x7f)
@@ -146,10 +144,8 @@ VOID BuildChannelList(
 	}
 
 	if ((pAd->CommonCfg.PhyMode == PHY_11A) || (pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED)
-#ifdef DOT11_N_SUPPORT
 		|| (pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11AN_MIXED)
 		|| (pAd->CommonCfg.PhyMode == PHY_11AGN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11N_5G)
-#endif // DOT11_N_SUPPORT //
 	)
 	{
 		switch (pAd->CommonCfg.CountryRegionForABand & 0x7f)
@@ -383,33 +379,18 @@ VOID ScanNextChannel(
 	NDIS_STATUS     NStatus;
 	ULONG           FrameLen = 0;
 	UCHAR           SsidLen = 0, ScanType = pAd->MlmeAux.ScanType, BBPValue = 0;
-#ifdef CONFIG_STA_SUPPORT
 	USHORT          Status;
 	PHEADER_802_11  pHdr80211;
-#endif // CONFIG_STA_SUPPORT //
 	UINT			ScanTimeIn5gChannel = SHORT_CHANNEL_TIME;
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if (MONITOR_ON(pAd))
-			return;
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef RALINK_ATE
-	// Nothing to do in ATE mode.
-	if (ATE_ON(pAd))
+	if (MONITOR_ON(pAd))
 		return;
-#endif // RALINK_ATE //
 
 	if (pAd->MlmeAux.Channel == 0)
 	{
 		if ((pAd->CommonCfg.BBPCurrentBW == BW_40)
-#ifdef CONFIG_STA_SUPPORT
 			&& (INFRA_ON(pAd)
 				|| (pAd->OpMode == OPMODE_AP))
-#endif // CONFIG_STA_SUPPORT //
 			)
 		{
 			AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
@@ -427,8 +408,6 @@ VOID ScanNextChannel(
 			DBGPRINT(RT_DEBUG_TRACE, ("SYNC - End of SCAN, restore to channel %d, Total BSS[%02d]\n",pAd->CommonCfg.Channel, pAd->ScanTab.BssNr));
 		}
 
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			//
 			// To prevent data lost.
@@ -458,31 +437,35 @@ VOID ScanNextChannel(
 			Status = MLME_SUCCESS;
 			MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_SCAN_CONF, 2, &Status);
 		}
-#endif // CONFIG_STA_SUPPORT //
-
 
 		RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
 	}
+#ifdef RT2870
+	else if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST) && (pAd->OpMode == OPMODE_STA))
+	{
+		pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
+		MlmeCntlConfirm(pAd, MT2_SCAN_CONF, MLME_FAIL_NO_RESOURCE);
+	}
+#endif // RT2870 //
 	else
 	{
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 		// BBP and RF are not accessible in PS mode, we has to wake them up first
 		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
+#ifdef RT2860
 				AsicForceWakeup(pAd, FROM_TX);
-
+#endif
+#ifdef RT2870
+			AsicForceWakeup(pAd, TRUE);
+#endif
 			// leave PSM during scanning. otherwise we may lost ProbeRsp & BEACON
 			if (pAd->StaCfg.Psm == PWR_SAVE)
 				MlmeSetPsmBit(pAd, PWR_ACTIVE);
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 		AsicSwitchChannel(pAd, pAd->MlmeAux.Channel, TRUE);
 		AsicLockChannel(pAd, pAd->MlmeAux.Channel);
 
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			if (pAd->MlmeAux.Channel > 14)
 			{
@@ -492,19 +475,8 @@ VOID ScanNextChannel(
 					ScanTimeIn5gChannel = MIN_CHANNEL_TIME;
 				}
 			}
-
-#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier
-			// carrier detection
-			if (pAd->CommonCfg.CarrierDetect.Enable == TRUE)
-			{
-				ScanType = SCAN_PASSIVE;
-				ScanTimeIn5gChannel = MIN_CHANNEL_TIME;
-			}
-#endif // CARRIER_DETECTION_SUPPORT //
 		}
 
-#endif // CONFIG_STA_SUPPORT //
-
 		//Global country domain(ch1-11:active scan, ch12-14 passive scan)
 		if ((pAd->MlmeAux.Channel <= 14) && (pAd->MlmeAux.Channel >= 12) && ((pAd->CommonCfg.CountryRegion & 0x7f) == REGION_31_BG_BAND))
 		{
@@ -515,7 +487,6 @@ VOID ScanNextChannel(
 		// Chnage the channel scan time for CISCO stuff based on its IAPP announcement
 		if (ScanType == FAST_SCAN_ACTIVE)
 			RTMPSetTimer(&pAd->MlmeAux.ScanTimer, FAST_ACTIVE_SCAN_TIME);
-#ifdef CONFIG_STA_SUPPORT
 		else if (((ScanType == SCAN_CISCO_ACTIVE) ||
 				(ScanType == SCAN_CISCO_PASSIVE) ||
 				(ScanType == SCAN_CISCO_CHANNEL_LOAD) ||
@@ -526,13 +497,10 @@ VOID ScanNextChannel(
 			else
 				RTMPSetTimer(&pAd->MlmeAux.ScanTimer, pAd->StaCfg.CCXScanTime);
 		}
-#endif // CONFIG_STA_SUPPORT //
 		else // must be SCAN_PASSIVE or SCAN_ACTIVE
 		{
 			if ((pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED)
-#ifdef DOT11_N_SUPPORT
 				|| (pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11AGN_MIXED)
-#endif // DOT11_N_SUPPORT //
 			)
 			{
 				if (pAd->MlmeAux.Channel > 14)
@@ -551,14 +519,12 @@ VOID ScanNextChannel(
 			if (NStatus != NDIS_STATUS_SUCCESS)
 			{
 				DBGPRINT(RT_DEBUG_TRACE, ("SYNC - ScanNextChannel() allocate memory fail\n"));
-#ifdef CONFIG_STA_SUPPORT
-				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+
 				{
 					pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
 					Status = MLME_FAIL_NO_RESOURCE;
 					MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_SCAN_CONF, 2, &Status);
 				}
-#endif // CONFIG_STA_SUPPORT //
 
 				return;
 			}
@@ -592,78 +558,35 @@ VOID ScanNextChannel(
 				FrameLen += Tmp;
 			}
 
-#ifdef DOT11_N_SUPPORT
 			if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
 			{
 				ULONG	Tmp;
 				UCHAR	HtLen;
 				UCHAR	BROADCOM[4] = {0x0, 0x90, 0x4c, 0x33};
-#ifdef RT_BIG_ENDIAN
-				HT_CAPABILITY_IE HtCapabilityTmp;
-#endif
+
 				if (pAd->bBroadComHT == TRUE)
 				{
 					HtLen = pAd->MlmeAux.HtCapabilityLen + 4;
-#ifdef RT_BIG_ENDIAN
-					NdisMoveMemory(&HtCapabilityTmp, &pAd->MlmeAux.HtCapability, SIZE_HT_CAP_IE);
-					*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
-					*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
 
 					MakeOutgoingFrame(pOutBuffer + FrameLen,          &Tmp,
 									1,                                &WpaIe,
 									1,                                &HtLen,
 									4,                                &BROADCOM[0],
-									pAd->MlmeAux.HtCapabilityLen,     &HtCapabilityTmp,
-									END_OF_ARGS);
-#else
-					MakeOutgoingFrame(pOutBuffer + FrameLen,          &Tmp,
-									1,                                &WpaIe,
-									1,                                &HtLen,
-									4,                                &BROADCOM[0],
 									pAd->MlmeAux.HtCapabilityLen,     &pAd->MlmeAux.HtCapability,
 									END_OF_ARGS);
-#endif // RT_BIG_ENDIAN //
 				}
 				else
 				{
 					HtLen = pAd->MlmeAux.HtCapabilityLen;
-#ifdef RT_BIG_ENDIAN
-					NdisMoveMemory(&HtCapabilityTmp, &pAd->CommonCfg.HtCapability, SIZE_HT_CAP_IE);
-					*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
-					*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
 
 					MakeOutgoingFrame(pOutBuffer + FrameLen,          &Tmp,
 									1,                                &HtCapIe,
 									1,                                &HtLen,
-									HtLen,                            &HtCapabilityTmp,
-									END_OF_ARGS);
-#else
-					MakeOutgoingFrame(pOutBuffer + FrameLen,          &Tmp,
-									1,                                &HtCapIe,
-									1,                                &HtLen,
 									HtLen,                            &pAd->CommonCfg.HtCapability,
 									END_OF_ARGS);
-#endif // RT_BIG_ENDIAN //
 				}
 				FrameLen += Tmp;
-
-#ifdef DOT11N_DRAFT3
-				if (pAd->CommonCfg.BACapability.field.b2040CoexistScanSup == 1)
-				{
-					ULONG		Tmp;
-					HtLen = 1;
-					MakeOutgoingFrame(pOutBuffer + FrameLen,            &Tmp,
-									  1,					&ExtHtCapIe,
-									  1,					&HtLen,
-									  1,          			&pAd->CommonCfg.BSSCoexist2040.word,
-									  END_OF_ARGS);
-
-					FrameLen += Tmp;
-				}
-#endif // DOT11N_DRAFT3 //
 			}
-#endif // DOT11_N_SUPPORT //
-
 
 			MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
 			MlmeFreeMemory(pAd, pOutBuffer);
@@ -671,11 +594,7 @@ VOID ScanNextChannel(
 
 		// For SCAN_CISCO_PASSIVE, do nothing and silently wait for beacon or other probe reponse
 
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			pAd->Mlme.SyncMachine.CurrState = SCAN_LISTEN;
-#endif // CONFIG_STA_SUPPORT //
-
+		pAd->Mlme.SyncMachine.CurrState = SCAN_LISTEN;
 	}
 }
 
diff --git a/drivers/staging/rt2860/common/cmm_wpa.c b/drivers/staging/rt2860/common/cmm_wpa.c
index 69baf522fa0..bda69e76867 100644
--- a/drivers/staging/rt2860/common/cmm_wpa.c
+++ b/drivers/staging/rt2860/common/cmm_wpa.c
@@ -39,10 +39,14 @@
 // WPA OUI
 UCHAR		OUI_WPA_NONE_AKM[4]		= {0x00, 0x50, 0xF2, 0x00};
 UCHAR       OUI_WPA_VERSION[4]      = {0x00, 0x50, 0xF2, 0x01};
+#ifndef RT30xx
 UCHAR       OUI_WPA_WEP40[4]      = {0x00, 0x50, 0xF2, 0x01};
+#endif
 UCHAR       OUI_WPA_TKIP[4]     = {0x00, 0x50, 0xF2, 0x02};
 UCHAR       OUI_WPA_CCMP[4]     = {0x00, 0x50, 0xF2, 0x04};
+#ifndef RT30xx
 UCHAR       OUI_WPA_WEP104[4]      = {0x00, 0x50, 0xF2, 0x05};
+#endif
 UCHAR       OUI_WPA_8021X_AKM[4]	= {0x00, 0x50, 0xF2, 0x01};
 UCHAR       OUI_WPA_PSK_AKM[4]      = {0x00, 0x50, 0xF2, 0x02};
 // WPA2 OUI
@@ -51,7 +55,9 @@ UCHAR       OUI_WPA2_TKIP[4]        = {0x00, 0x0F, 0xAC, 0x02};
 UCHAR       OUI_WPA2_CCMP[4]        = {0x00, 0x0F, 0xAC, 0x04};
 UCHAR       OUI_WPA2_8021X_AKM[4]   = {0x00, 0x0F, 0xAC, 0x01};
 UCHAR       OUI_WPA2_PSK_AKM[4]   	= {0x00, 0x0F, 0xAC, 0x02};
+#ifndef RT30xx
 UCHAR       OUI_WPA2_WEP104[4]   = {0x00, 0x0F, 0xAC, 0x05};
+#endif
 // MSA OUI
 UCHAR   	OUI_MSA_8021X_AKM[4]    = {0x00, 0x0F, 0xAC, 0x05};		// Not yet final - IEEE 802.11s-D1.06
 UCHAR   	OUI_MSA_PSK_AKM[4]   	= {0x00, 0x0F, 0xAC, 0x06};		// Not yet final - IEEE 802.11s-D1.06
@@ -370,7 +376,7 @@ static VOID RTMPInsertRsnIeCipher(
                 break;
         }
 
-#ifdef CONFIG_STA_SUPPORT
+#ifndef RT30xx
 		if ((pAd->OpMode == OPMODE_STA) &&
 			(pAd->StaCfg.GroupCipher != Ndis802_11Encryption2Enabled) &&
 			(pAd->StaCfg.GroupCipher != Ndis802_11Encryption3Enabled))
@@ -386,8 +392,7 @@ static VOID RTMPInsertRsnIeCipher(
 					break;
 			}
 		}
-#endif // CONFIG_STA_SUPPORT //
-
+#endif
 		// swap for big-endian platform
 		pRsnie_cipher->version = cpu2le16(pRsnie_cipher->version);
 	    pRsnie_cipher->ucount = cpu2le16(pRsnie_cipher->ucount);
@@ -448,7 +453,7 @@ static VOID RTMPInsertRsnIeCipher(
                 break;
         }
 
-#ifdef CONFIG_STA_SUPPORT
+#ifndef RT30xx
 		if ((pAd->OpMode == OPMODE_STA) &&
 			(pAd->StaCfg.GroupCipher != Ndis802_11Encryption2Enabled) &&
 			(pAd->StaCfg.GroupCipher != Ndis802_11Encryption3Enabled))
@@ -464,8 +469,7 @@ static VOID RTMPInsertRsnIeCipher(
 					break;
 			}
 		}
-#endif // CONFIG_STA_SUPPORT //
-
+#endif
 		// swap for big-endian platform
 		pRsnie_cipher->version = cpu2le16(pRsnie_cipher->version);
 	    pRsnie_cipher->ucount = cpu2le16(pRsnie_cipher->ucount);
@@ -621,23 +625,19 @@ VOID RTMPMakeRSNIE(
 	UCHAR		PrimaryRsnie;
 	BOOLEAN		bMixCipher = FALSE;	// indicate the pairwise and group cipher are different
 	UCHAR		p_offset;
-	WPA_MIX_PAIR_CIPHER		FlexibleCipher = MIX_CIPHER_NOTUSE;	// it provide the more flexible cipher combination in WPA-WPA2 and TKIPAES mode
+	WPA_MIX_PAIR_CIPHER		FlexibleCipher = WPA_TKIPAES_WPA2_TKIPAES;	// it provide the more flexible cipher combination in WPA-WPA2 and TKIPAES mode
 
 	rsnielen_cur_p = NULL;
 	rsnielen_ex_cur_p = NULL;
 
 	{
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
-#ifdef WPA_SUPPLICANT_SUPPORT
 			if (pAd->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
 			{
 				if (AuthMode < Ndis802_11AuthModeWPA)
 					return;
 			}
 			else
-#endif // WPA_SUPPLICANT_SUPPORT //
 			{
 				// Support WPAPSK or WPA2PSK in STA-Infra mode
 				// Support WPANone in STA-Adhoc mode
@@ -660,7 +660,6 @@ VOID RTMPMakeRSNIE(
 
 			bMixCipher = pAd->StaCfg.bMixCipher;
 		}
-#endif // CONFIG_STA_SUPPORT //
 	}
 
 	// indicate primary RSNIE as WPA or WPA2
@@ -1131,11 +1130,6 @@ BOOLEAN RTMPParseEapolKeyData(
         return FALSE;
     }
 
-
-#ifdef CONFIG_STA_SUPPORT
-	// Todo
-#endif // CONFIG_STA_SUPPORT //
-
 	return TRUE;
 
 }
diff --git a/drivers/staging/rt2860/common/dfs.c b/drivers/staging/rt2860/common/dfs.c
index b09bba5cb20..23330f2661d 100644
--- a/drivers/staging/rt2860/common/dfs.c
+++ b/drivers/staging/rt2860/common/dfs.c
@@ -80,18 +80,6 @@ VOID BbpRadarDetectionStart(
 	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 124, 0x28);
 	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 125, 0xff);
 
-#if 0
-	// toggle Rx enable bit for radar detection.
-	// it's Andy's recommand.
-	{
-		UINT32 Value;
-	RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-	Value |= (0x1 << 3);
-	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-	Value &= ~(0x1 << 3);
-	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-	}
-#endif
 	RadarPeriod = ((UINT)RdIdleTimeTable[pAd->CommonCfg.RadarDetect.RDDurRegion][0] + (UINT)pAd->CommonCfg.RadarDetect.DfsSessionTime) < 250 ?
 			(RdIdleTimeTable[pAd->CommonCfg.RadarDetect.RDDurRegion][0] + pAd->CommonCfg.RadarDetect.DfsSessionTime) : 250;
 
@@ -314,15 +302,6 @@ ULONG RTMPReadRadarDuration(
 {
 	ULONG result = 0;
 
-#ifdef DFS_SUPPORT
-	UINT8 duration1 = 0, duration2 = 0, duration3 = 0;
-
-	BBP_IO_READ8_BY_REG_ID(pAd, BBP_R116, &duration1);
-	BBP_IO_READ8_BY_REG_ID(pAd, BBP_R117, &duration2);
-	BBP_IO_READ8_BY_REG_ID(pAd, BBP_R118, &duration3);
-	result = (duration1 << 16) + (duration2 << 8) + duration3;
-#endif // DFS_SUPPORT //
-
 	return result;
 
 }
diff --git a/drivers/staging/rt2860/common/eeprom.c b/drivers/staging/rt2860/common/eeprom.c
index bed2d666629..9729323baca 100644
--- a/drivers/staging/rt2860/common/eeprom.c
+++ b/drivers/staging/rt2860/common/eeprom.c
@@ -73,12 +73,16 @@ USHORT ShiftInBits(
         RaiseClock(pAd, &x);
 
         RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
-
+#ifdef RT30xx
+		LowerClock(pAd, &x); //prevent read failed
+#endif
         x &= ~(EEDI);
         if(x & EEDO)
             data |= 1;
 
+#ifndef RT30xx
         LowerClock(pAd, &x);
+#endif
     }
 
     return data;
@@ -181,6 +185,15 @@ USHORT RTMP_EEPROM_READ16(
     UINT32		x;
     USHORT		data;
 
+#ifdef RT30xx
+	if (pAd->NicConfig2.field.AntDiversity)
+    {
+    	pAd->EepromAccess = TRUE;
+    }
+//2008/09/11:KH add to support efuse<--
+//2008/09/11:KH add to support efuse-->
+{
+#endif
     Offset /= 2;
     // reset bits and set EECS
     RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
@@ -188,9 +201,17 @@ USHORT RTMP_EEPROM_READ16(
     x |= EECS;
     RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
 
+#ifdef RT30xx
+	// patch can not access e-Fuse issue
+    if (!IS_RT3090(pAd))
+    {
+#endif
 	// kick a pulse
 	RaiseClock(pAd, &x);
 	LowerClock(pAd, &x);
+#ifdef RT30xx
+    }
+#endif
 
     // output the read_opcode and register number in that order
     ShiftOutBits(pAd, EEPROM_READ_OPCODE, 3);
@@ -201,6 +222,17 @@ USHORT RTMP_EEPROM_READ16(
 
     EEpromCleanup(pAd);
 
+#ifdef RT30xx
+	// Antenna and EEPROM access are both using EESK pin,
+    // Therefor we should avoid accessing EESK at the same time
+    // Then restore antenna after EEPROM access
+	if ((pAd->NicConfig2.field.AntDiversity) || (pAd->RfIcType == RFIC_3020))
+    {
+	    pAd->EepromAccess = FALSE;
+	    AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt);
+    }
+}
+#endif
     return data;
 }	//ReadEEprom
 
@@ -211,6 +243,15 @@ VOID RTMP_EEPROM_WRITE16(
 {
     UINT32 x;
 
+#ifdef RT30xx
+	if (pAd->NicConfig2.field.AntDiversity)
+    {
+    	pAd->EepromAccess = TRUE;
+    }
+	//2008/09/11:KH add to support efuse<--
+//2008/09/11:KH add to support efuse-->
+	{
+#endif
 	Offset /= 2;
 
 	EWEN(pAd);
@@ -221,9 +262,17 @@ VOID RTMP_EEPROM_WRITE16(
     x |= EECS;
     RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
 
+#ifdef RT30xx
+	// patch can not access e-Fuse issue
+    if (!IS_RT3090(pAd))
+    {
+#endif
 	// kick a pulse
 	RaiseClock(pAd, &x);
 	LowerClock(pAd, &x);
+#ifdef RT30xx
+    }
+#endif
 
     // output the read_opcode ,register number and data in that order
     ShiftOutBits(pAd, EEPROM_WRITE_OPCODE, 3);
@@ -240,5 +289,1222 @@ VOID RTMP_EEPROM_WRITE16(
 	EWDS(pAd);
 
     EEpromCleanup(pAd);
+
+#ifdef RT30xx
+	// Antenna and EEPROM access are both using EESK pin,
+    // Therefor we should avoid accessing EESK at the same time
+    // Then restore antenna after EEPROM access
+	if ((pAd->NicConfig2.field.AntDiversity) || (pAd->RfIcType == RFIC_3020))
+    {
+	    pAd->EepromAccess = FALSE;
+	    AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt);
+    }
+}
+#endif
+}
+
+//2008/09/11:KH add to support efuse<--
+#ifdef RT30xx
+/*
+	========================================================================
+
+	Routine Description:
+
+	Arguments:
+
+	Return Value:
+
+	IRQL =
+
+	Note:
+
+	========================================================================
+*/
+UCHAR eFuseReadRegisters(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	USHORT Offset,
+	IN	USHORT Length,
+	OUT	USHORT* pData)
+{
+	EFUSE_CTRL_STRUC		eFuseCtrlStruc;
+	int	i;
+	USHORT	efuseDataOffset;
+	UINT32	data;
+
+	RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+
+	//Step0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
+	//Use the eeprom logical address and covert to address to block number
+	eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0;
+
+	//Step1. Write EFSROM_MODE (0x580, bit7:bit6) to 0.
+	eFuseCtrlStruc.field.EFSROM_MODE = 0;
+
+	//Step2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure.
+	eFuseCtrlStruc.field.EFSROM_KICK = 1;
+
+	NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
+	RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
+
+	//Step3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again.
+	i = 0;
+	while(i < 100)
+	{
+		//rtmp.HwMemoryReadDword(EFUSE_CTRL, (DWORD *) &eFuseCtrlStruc, 4);
+		RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+		if(eFuseCtrlStruc.field.EFSROM_KICK == 0)
+		{
+			break;
+		}
+		RTMPusecDelay(2);
+		i++;
+	}
+
+	//if EFSROM_AOUT is not found in physical address, write 0xffff
+	if (eFuseCtrlStruc.field.EFSROM_AOUT == 0x3f)
+	{
+		for(i=0; i<Length/2; i++)
+			*(pData+2*i) = 0xffff;
+	}
+	else
+	{
+		//Step4. Read 16-byte of data from EFUSE_DATA0-3 (0x590-0x59C)
+		efuseDataOffset =  EFUSE_DATA3 - (Offset & 0xC)  ;
+		//data hold 4 bytes data.
+		//In RTMP_IO_READ32 will automatically execute 32-bytes swapping
+		RTMP_IO_READ32(pAd, efuseDataOffset, &data);
+		//Decide the upper 2 bytes or the bottom 2 bytes.
+		// Little-endian		S	|	S	Big-endian
+		// addr	3	2	1	0	|	0	1	2	3
+		// Ori-V	D	C	B	A	|	A	B	C	D
+		//After swapping
+		//		D	C	B	A	|	D	C	B	A
+		//Return 2-bytes
+		//The return byte statrs from S. Therefore, the little-endian will return BA, the Big-endian will return DC.
+		//For returning the bottom 2 bytes, the Big-endian should shift right 2-bytes.
+		data = data >> (8*(Offset & 0x3));
+
+		NdisMoveMemory(pData, &data, Length);
+	}
+
+	return (UCHAR) eFuseCtrlStruc.field.EFSROM_AOUT;
+
+}
+
+/*
+	========================================================================
+
+	Routine Description:
+
+	Arguments:
+
+	Return Value:
+
+	IRQL =
+
+	Note:
+
+	========================================================================
+*/
+VOID eFusePhysicalReadRegisters(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	USHORT Offset,
+	IN	USHORT Length,
+	OUT	USHORT* pData)
+{
+	EFUSE_CTRL_STRUC		eFuseCtrlStruc;
+	int	i;
+	USHORT	efuseDataOffset;
+	UINT32	data;
+
+	RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+
+	//Step0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
+	eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0;
+
+	//Step1. Write EFSROM_MODE (0x580, bit7:bit6) to 1.
+	//Read in physical view
+	eFuseCtrlStruc.field.EFSROM_MODE = 1;
+
+	//Step2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure.
+	eFuseCtrlStruc.field.EFSROM_KICK = 1;
+
+	NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
+	RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
+
+	//Step3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again.
+	i = 0;
+	while(i < 100)
+	{
+		RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+		if(eFuseCtrlStruc.field.EFSROM_KICK == 0)
+			break;
+		RTMPusecDelay(2);
+		i++;
+	}
+
+	//Step4. Read 16-byte of data from EFUSE_DATA0-3 (0x59C-0x590)
+	//Because the size of each EFUSE_DATA is 4 Bytes, the size of address of each is 2 bits.
+	//The previous 2 bits is the EFUSE_DATA number, the last 2 bits is used to decide which bytes
+	//Decide which EFUSE_DATA to read
+	//590:F E D C
+	//594:B A 9 8
+	//598:7 6 5 4
+	//59C:3 2 1 0
+	efuseDataOffset =  EFUSE_DATA3 - (Offset & 0xC)  ;
+
+	RTMP_IO_READ32(pAd, efuseDataOffset, &data);
+
+	data = data >> (8*(Offset & 0x3));
+
+	NdisMoveMemory(pData, &data, Length);
+
+}
+
+/*
+	========================================================================
+
+	Routine Description:
+
+	Arguments:
+
+	Return Value:
+
+	IRQL =
+
+	Note:
+
+	========================================================================
+*/
+VOID eFuseReadPhysical(
+	IN	PRTMP_ADAPTER	pAd,
+  	IN	PUSHORT lpInBuffer,
+  	IN	ULONG nInBufferSize,
+  	OUT	PUSHORT lpOutBuffer,
+  	IN	ULONG nOutBufferSize
+)
+{
+	USHORT* pInBuf = (USHORT*)lpInBuffer;
+	USHORT* pOutBuf = (USHORT*)lpOutBuffer;
+
+	USHORT Offset = pInBuf[0];					//addr
+	USHORT Length = pInBuf[1];					//length
+	int 		i;
+
+	for(i=0; i<Length; i+=2)
+	{
+		eFusePhysicalReadRegisters(pAd,Offset+i, 2, &pOutBuf[i/2]);
+	}
+}
+
+/*
+	========================================================================
+
+	Routine Description:
+
+	Arguments:
+
+	Return Value:
+
+	IRQL =
+
+	Note:
+
+	========================================================================
+*/
+NTSTATUS eFuseRead(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	USHORT			Offset,
+	OUT	PUCHAR			pData,
+	IN	USHORT			Length)
+{
+	USHORT* pOutBuf = (USHORT*)pData;
+	NTSTATUS	Status = STATUS_SUCCESS;
+	UCHAR	EFSROM_AOUT;
+	int	i;
+
+	for(i=0; i<Length; i+=2)
+	{
+		EFSROM_AOUT = eFuseReadRegisters(pAd, Offset+i, 2, &pOutBuf[i/2]);
+	}
+	return Status;
+}
+
+/*
+	========================================================================
+
+	Routine Description:
+
+	Arguments:
+
+	Return Value:
+
+	IRQL =
+
+	Note:
+
+	========================================================================
+*/
+VOID eFusePhysicalWriteRegisters(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	USHORT Offset,
+	IN	USHORT Length,
+	OUT	USHORT* pData)
+{
+	EFUSE_CTRL_STRUC		eFuseCtrlStruc;
+	int	i;
+	USHORT	efuseDataOffset;
+	UINT32	data, eFuseDataBuffer[4];
+
+	//Step0. Write 16-byte of data to EFUSE_DATA0-3 (0x590-0x59C), where EFUSE_DATA0 is the LSB DW, EFUSE_DATA3 is the MSB DW.
+
+	/////////////////////////////////////////////////////////////////
+	//read current values of 16-byte block
+	RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+
+	//Step0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
+	eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0;
+
+	//Step1. Write EFSROM_MODE (0x580, bit7:bit6) to 1.
+	eFuseCtrlStruc.field.EFSROM_MODE = 1;
+
+	//Step2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure.
+	eFuseCtrlStruc.field.EFSROM_KICK = 1;
+
+	NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
+	RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
+
+	//Step3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again.
+	i = 0;
+	while(i < 100)
+	{
+		RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+
+		if(eFuseCtrlStruc.field.EFSROM_KICK == 0)
+			break;
+		RTMPusecDelay(2);
+		i++;
+	}
+
+	//Step4. Read 16-byte of data from EFUSE_DATA0-3 (0x59C-0x590)
+	efuseDataOffset =  EFUSE_DATA3;
+	for(i=0; i< 4; i++)
+	{
+		RTMP_IO_READ32(pAd, efuseDataOffset, (PUINT32) &eFuseDataBuffer[i]);
+		efuseDataOffset -=  4;
+	}
+
+	//Update the value, the offset is multiple of 2, length is 2
+	efuseDataOffset = (Offset & 0xc) >> 2;
+	data = pData[0] & 0xffff;
+	//The offset should be 0x***10 or 0x***00
+	if((Offset % 4) != 0)
+	{
+		eFuseDataBuffer[efuseDataOffset] = (eFuseDataBuffer[efuseDataOffset] & 0xffff) | (data << 16);
+	}
+	else
+	{
+		eFuseDataBuffer[efuseDataOffset] = (eFuseDataBuffer[efuseDataOffset] & 0xffff0000) | data;
+	}
+
+	efuseDataOffset =  EFUSE_DATA3;
+	for(i=0; i< 4; i++)
+	{
+		RTMP_IO_WRITE32(pAd, efuseDataOffset, eFuseDataBuffer[i]);
+		efuseDataOffset -= 4;
+	}
+	/////////////////////////////////////////////////////////////////
+
+	//Step1. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
+	eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0;
+
+	//Step2. Write EFSROM_MODE (0x580, bit7:bit6) to 3.
+	eFuseCtrlStruc.field.EFSROM_MODE = 3;
+
+	//Step3. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical write procedure.
+	eFuseCtrlStruc.field.EFSROM_KICK = 1;
+
+	NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
+	RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
+
+	//Step4. Polling EFSROM_KICK(0x580, bit30) until it become 0 again. It��s done.
+	i = 0;
+	while(i < 100)
+	{
+		RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+
+		if(eFuseCtrlStruc.field.EFSROM_KICK == 0)
+			break;
+
+		RTMPusecDelay(2);
+		i++;
+	}
+}
+
+/*
+	========================================================================
+
+	Routine Description:
+
+	Arguments:
+
+	Return Value:
+
+	IRQL =
+
+	Note:
+
+	========================================================================
+*/
+NTSTATUS eFuseWriteRegisters(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	USHORT Offset,
+	IN	USHORT Length,
+	IN	USHORT* pData)
+{
+	USHORT	i;
+	USHORT	eFuseData;
+	USHORT	LogicalAddress, BlkNum = 0xffff;
+	UCHAR	EFSROM_AOUT;
+
+	USHORT addr,tmpaddr, InBuf[3], tmpOffset;
+	USHORT buffer[8];
+	BOOLEAN		bWriteSuccess = TRUE;
+
+	DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters Offset=%x, pData=%x\n", Offset, *pData));
+
+	//Step 0. find the entry in the mapping table
+	//The address of EEPROM is 2-bytes alignment.
+	//The last bit is used for alignment, so it must be 0.
+	tmpOffset = Offset & 0xfffe;
+	EFSROM_AOUT = eFuseReadRegisters(pAd, tmpOffset, 2, &eFuseData);
+
+	if( EFSROM_AOUT == 0x3f)
+	{	//find available logical address pointer
+		//the logical address does not exist, find an empty one
+		//from the first address of block 45=16*45=0x2d0 to the last address of block 47
+		//==>48*16-3(reserved)=2FC
+		for (i=EFUSE_USAGE_MAP_START; i<=EFUSE_USAGE_MAP_END; i+=2)
+		{
+			//Retrive the logical block nubmer form each logical address pointer
+			//It will access two logical address pointer each time.
+			eFusePhysicalReadRegisters(pAd, i, 2, &LogicalAddress);
+			if( (LogicalAddress & 0xff) == 0)
+			{//Not used logical address pointer
+				BlkNum = i-EFUSE_USAGE_MAP_START;
+				break;
+			}
+			else if(( (LogicalAddress >> 8) & 0xff) == 0)
+			{//Not used logical address pointer
+				if (i != EFUSE_USAGE_MAP_END)
+				{
+					BlkNum = i-EFUSE_USAGE_MAP_START+1;
+				}
+				break;
+			}
+		}
+	}
+	else
+	{
+		BlkNum = EFSROM_AOUT;
+	}
+
+	DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters BlkNum = %d \n", BlkNum));
+
+	if(BlkNum == 0xffff)
+	{
+		DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters: out of free E-fuse space!!!\n"));
+		return FALSE;
+	}
+
+	//Step 1. Save data of this block	which is pointed by the avaible logical address pointer
+	// read and save the original block data
+	for(i =0; i<8; i++)
+	{
+		addr = BlkNum * 0x10 ;
+
+		InBuf[0] = addr+2*i;
+		InBuf[1] = 2;
+		InBuf[2] = 0x0;
+
+		eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
+
+		buffer[i] = InBuf[2];
+	}
+
+	//Step 2. Update the data in buffer, and write the data to Efuse
+	buffer[ (Offset >> 1) % 8] = pData[0];
+
+	do
+	{
+		//Step 3. Write the data to Efuse
+		if(!bWriteSuccess)
+		{
+			for(i =0; i<8; i++)
+			{
+				addr = BlkNum * 0x10 ;
+
+				InBuf[0] = addr+2*i;
+				InBuf[1] = 2;
+				InBuf[2] = buffer[i];
+
+				eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 2);
+			}
+		}
+		else
+		{
+				addr = BlkNum * 0x10 ;
+
+				InBuf[0] = addr+(Offset % 16);
+				InBuf[1] = 2;
+				InBuf[2] = pData[0];
+
+				eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 2);
+		}
+
+		//Step 4. Write mapping table
+		addr = EFUSE_USAGE_MAP_START+BlkNum;
+
+		tmpaddr = addr;
+
+		if(addr % 2 != 0)
+			addr = addr -1;
+		InBuf[0] = addr;
+		InBuf[1] = 2;
+
+		//convert the address from 10 to 8 bit ( bit7, 6 = parity and bit5 ~ 0 = bit9~4), and write to logical map entry
+		tmpOffset = Offset;
+		tmpOffset >>= 4;
+		tmpOffset |= ((~((tmpOffset & 0x01) ^ ( tmpOffset >> 1 & 0x01) ^  (tmpOffset >> 2 & 0x01) ^  (tmpOffset >> 3 & 0x01))) << 6) & 0x40;
+		tmpOffset |= ((~( (tmpOffset >> 2 & 0x01) ^ (tmpOffset >> 3 & 0x01) ^ (tmpOffset >> 4 & 0x01) ^ ( tmpOffset >> 5 & 0x01))) << 7) & 0x80;
+
+		// write the logical address
+		if(tmpaddr%2 != 0)
+			InBuf[2] = tmpOffset<<8;
+		else
+			InBuf[2] = tmpOffset;
+
+		eFuseWritePhysical(pAd,&InBuf[0], 6, NULL, 0);
+
+		//Step 5. Compare data if not the same, invalidate the mapping entry, then re-write the data until E-fuse is exhausted
+		bWriteSuccess = TRUE;
+		for(i =0; i<8; i++)
+		{
+			addr = BlkNum * 0x10 ;
+
+			InBuf[0] = addr+2*i;
+			InBuf[1] = 2;
+			InBuf[2] = 0x0;
+
+			eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
+
+			if(buffer[i] != InBuf[2])
+			{
+				bWriteSuccess = FALSE;
+				break;
+			}
+		}
+
+		//Step 6. invlidate mapping entry and find a free mapping entry if not succeed
+		if (!bWriteSuccess)
+		{
+			DBGPRINT(RT_DEBUG_TRACE, ("Not bWriteSuccess BlkNum = %d\n", BlkNum));
+
+			// the offset of current mapping entry
+			addr = EFUSE_USAGE_MAP_START+BlkNum;
+
+			//find a new mapping entry
+			BlkNum = 0xffff;
+			for (i=EFUSE_USAGE_MAP_START; i<=EFUSE_USAGE_MAP_END; i+=2)
+			{
+				eFusePhysicalReadRegisters(pAd, i, 2, &LogicalAddress);
+				if( (LogicalAddress & 0xff) == 0)
+				{
+					BlkNum = i-EFUSE_USAGE_MAP_START;
+					break;
+				}
+				else if(( (LogicalAddress >> 8) & 0xff) == 0)
+				{
+					if (i != EFUSE_USAGE_MAP_END)
+					{
+						BlkNum = i+1-EFUSE_USAGE_MAP_START;
+					}
+					break;
+				}
+			}
+			DBGPRINT(RT_DEBUG_TRACE, ("Not bWriteSuccess new BlkNum = %d\n", BlkNum));
+			if(BlkNum == 0xffff)
+			{
+				DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters: out of free E-fuse space!!!\n"));
+				return FALSE;
+			}
+
+			//invalidate the original mapping entry if new entry is not found
+			tmpaddr = addr;
+
+			if(addr % 2 != 0)
+				addr = addr -1;
+			InBuf[0] = addr;
+			InBuf[1] = 2;
+
+			eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
+
+			// write the logical address
+			if(tmpaddr%2 != 0)
+			{
+				// Invalidate the high byte
+				for (i=8; i<15; i++)
+				{
+					if( ( (InBuf[2] >> i) & 0x01) == 0)
+					{
+						InBuf[2] |= (0x1 <<i);
+						break;
+					}
+				}
+			}
+			else
+			{
+				// invalidate the low byte
+				for (i=0; i<8; i++)
+				{
+					if( ( (InBuf[2] >> i) & 0x01) == 0)
+					{
+						InBuf[2] |= (0x1 <<i);
+						break;
+					}
+				}
+			}
+			eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 0);
+		}
+	}
+	while(!bWriteSuccess);
+
+	return TRUE;
+}
+
+/*
+	========================================================================
+
+	Routine Description:
+
+	Arguments:
+
+	Return Value:
+
+	IRQL =
+
+	Note:
+
+	========================================================================
+*/
+VOID eFuseWritePhysical(
+	IN	PRTMP_ADAPTER	pAd,
+  	PUSHORT lpInBuffer,
+	ULONG nInBufferSize,
+  	PUCHAR lpOutBuffer,
+  	ULONG nOutBufferSize
+)
+{
+	USHORT* pInBuf = (USHORT*)lpInBuffer;
+	int 		i;
+	//USHORT* pOutBuf = (USHORT*)ioBuffer;
+
+	USHORT Offset = pInBuf[0];					//addr
+	USHORT Length = pInBuf[1];					//length
+	USHORT* pValueX = &pInBuf[2];				//value ...
+		// Little-endian		S	|	S	Big-endian
+		// addr	3	2	1	0	|	0	1	2	3
+		// Ori-V	D	C	B	A	|	A	B	C	D
+		//After swapping
+		//		D	C	B	A	|	D	C	B	A
+		//Both the little and big-endian use the same sequence to write  data.
+		//Therefore, we only need swap data when read the data.
+	for(i=0; i<Length; i+=2)
+	{
+		eFusePhysicalWriteRegisters(pAd, Offset+i, 2, &pValueX[i/2]);
+	}
+}
+
+
+/*
+	========================================================================
+
+	Routine Description:
+
+	Arguments:
+
+	Return Value:
+
+	IRQL =
+
+	Note:
+
+	========================================================================
+*/
+NTSTATUS eFuseWrite(
+   	IN	PRTMP_ADAPTER	pAd,
+	IN	USHORT			Offset,
+	IN	PUCHAR			pData,
+	IN	USHORT			length)
+{
+	int i;
+
+	USHORT* pValueX = (PUSHORT) pData;				//value ...
+		//The input value=3070 will be stored as following
+ 		// Little-endian		S	|	S	Big-endian
+		// addr			1	0	|	0	1
+		// Ori-V			30	70	|	30	70
+		//After swapping
+		//				30	70	|	70	30
+		//Casting
+		//				3070	|	7030 (x)
+		//The swapping should be removed for big-endian
+	for(i=0; i<length; i+=2)
+	{
+		eFuseWriteRegisters(pAd, Offset+i, 2, &pValueX[i/2]);
+	}
+
+	return TRUE;
+}
+
+/*
+	========================================================================
+
+	Routine Description:
+
+	Arguments:
+
+	Return Value:
+
+	IRQL =
+
+	Note:
+
+	========================================================================
+*/
+INT set_eFuseGetFreeBlockCount_Proc(
+   	IN	PRTMP_ADAPTER	pAd,
+	IN	PUCHAR			arg)
+{
+	USHORT i;
+	USHORT	LogicalAddress;
+	USHORT efusefreenum=0;
+	if(!pAd->bUseEfuse)
+		return FALSE;
+	for (i = EFUSE_USAGE_MAP_START; i <= EFUSE_USAGE_MAP_END; i+=2)
+	{
+		eFusePhysicalReadRegisters(pAd, i, 2, &LogicalAddress);
+		if( (LogicalAddress & 0xff) == 0)
+		{
+			efusefreenum= (UCHAR) (EFUSE_USAGE_MAP_END-i+1);
+			break;
+		}
+		else if(( (LogicalAddress >> 8) & 0xff) == 0)
+		{
+			efusefreenum = (UCHAR) (EFUSE_USAGE_MAP_END-i);
+			break;
+		}
+
+		if(i == EFUSE_USAGE_MAP_END)
+			efusefreenum = 0;
+	}
+	printk("efuseFreeNumber is %d\n",efusefreenum);
+	return TRUE;
+}
+INT set_eFusedump_Proc(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	PUCHAR			arg)
+{
+USHORT InBuf[3];
+	INT i=0;
+	if(!pAd->bUseEfuse)
+		return FALSE;
+	for(i =0; i<EFUSE_USAGE_MAP_END/2; i++)
+	{
+		InBuf[0] = 2*i;
+		InBuf[1] = 2;
+		InBuf[2] = 0x0;
+
+		eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
+		if(i%4==0)
+		printk("\nBlock %x:",i/8);
+		printk("%04x ",InBuf[2]);
+	}
+	return TRUE;
+}
+INT	set_eFuseLoadFromBin_Proc(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	PUCHAR			arg)
+{
+	CHAR					*src;
+	struct file				*srcf;
+	INT 					retval, orgfsuid, orgfsgid;
+   	mm_segment_t			orgfs;
+	UCHAR					*buffer;
+	UCHAR					BinFileSize=0;
+	INT						i = 0,j=0,k=1;
+	USHORT					*PDATA;
+	USHORT					DATA;
+	BinFileSize=strlen("RT30xxEEPROM.bin");
+	src = kmalloc(128, MEM_ALLOC_FLAG);
+	NdisZeroMemory(src, 128);
+
+ 	if(strlen(arg)>0)
+	{
+
+		NdisMoveMemory(src, arg, strlen(arg));
+ 	}
+
+	else
+	{
+
+		NdisMoveMemory(src, "RT30xxEEPROM.bin", BinFileSize);
+	}
+
+	DBGPRINT(RT_DEBUG_TRACE, ("FileName=%s\n",src));
+	buffer = kmalloc(MAX_EEPROM_BIN_FILE_SIZE, MEM_ALLOC_FLAG);
+
+	if(buffer == NULL)
+	{
+		kfree(src);
+		 return FALSE;
+}
+	PDATA=kmalloc(sizeof(USHORT)*8,MEM_ALLOC_FLAG);
+
+	if(PDATA==NULL)
+	{
+		kfree(src);
+
+		kfree(buffer);
+		return FALSE;
+	}
+	/* Don't change to uid 0, let the file be opened as the "normal" user */
+#if 0
+	orgfsuid = current->fsuid;
+	orgfsgid = current->fsgid;
+	current->fsuid=current->fsgid = 0;
+#endif
+    	orgfs = get_fs();
+   	 set_fs(KERNEL_DS);
+
+	if (src && *src)
+	{
+		srcf = filp_open(src, O_RDONLY, 0);
+		if (IS_ERR(srcf))
+		{
+			DBGPRINT(RT_DEBUG_ERROR, ("--> Error %ld opening %s\n", -PTR_ERR(srcf),src));
+			return FALSE;
+		}
+		else
+		{
+			// The object must have a read method
+			if (srcf->f_op && srcf->f_op->read)
+			{
+				memset(buffer, 0x00, MAX_EEPROM_BIN_FILE_SIZE);
+				while(srcf->f_op->read(srcf, &buffer[i], 1, &srcf->f_pos)==1)
+				{
+					DBGPRINT(RT_DEBUG_TRACE, ("%02X ",buffer[i]));
+					if((i+1)%8==0)
+						DBGPRINT(RT_DEBUG_TRACE, ("\n"));
+              			i++;
+						if(i>=MAX_EEPROM_BIN_FILE_SIZE)
+							{
+								DBGPRINT(RT_DEBUG_ERROR, ("--> Error %ld reading %s, The file is too large[1024]\n", -PTR_ERR(srcf),src));
+								kfree(PDATA);
+								kfree(buffer);
+								kfree(src);
+								return FALSE;
+							}
+			       }
+			}
+			else
+			{
+						DBGPRINT(RT_DEBUG_ERROR, ("--> Error!! System doest not support read function\n"));
+						kfree(PDATA);
+						kfree(buffer);
+						kfree(src);
+						return FALSE;
+			}
+      		}
+
+
+	}
+	else
+		{
+					DBGPRINT(RT_DEBUG_ERROR, ("--> Error src  or srcf is null\n"));
+					kfree(PDATA);
+					kfree(buffer);
+					return FALSE;
+
+		}
+
+
+	retval=filp_close(srcf,NULL);
+
+	if (retval)
+	{
+		DBGPRINT(RT_DEBUG_TRACE, ("--> Error %d closing %s\n", -retval, src));
+	}
+	set_fs(orgfs);
+#if 0
+	current->fsuid = orgfsuid;
+	current->fsgid = orgfsgid;
+#endif
+	for(j=0;j<i;j++)
+	{
+		DBGPRINT(RT_DEBUG_TRACE, ("%02X ",buffer[j]));
+		if((j+1)%2==0)
+			PDATA[j/2%8]=((buffer[j]<<8)&0xff00)|(buffer[j-1]&0xff);
+		if(j%16==0)
+		{
+			k=buffer[j];
+		}
+		else
+		{
+			k&=buffer[j];
+			if((j+1)%16==0)
+			{
+
+				DBGPRINT(RT_DEBUG_TRACE, (" result=%02X,blk=%02x\n",k,j/16));
+
+				if(k!=0xff)
+					eFuseWriteRegistersFromBin(pAd,(USHORT)j-15, 16, PDATA);
+				else
+					{
+						if(eFuseReadRegisters(pAd,j, 2,(PUSHORT)&DATA)!=0x3f)
+							eFuseWriteRegistersFromBin(pAd,(USHORT)j-15, 16, PDATA);
+					}
+				/*
+				for(l=0;l<8;l++)
+					printk("%04x ",PDATA[l]);
+				printk("\n");
+				*/
+				NdisZeroMemory(PDATA,16);
+
+
+			}
+		}
+
+
+	}
+
+
+	kfree(PDATA);
+	kfree(buffer);
+	kfree(src);
+	return TRUE;
+}
+NTSTATUS eFuseWriteRegistersFromBin(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	USHORT Offset,
+	IN	USHORT Length,
+	IN	USHORT* pData)
+{
+	USHORT	i;
+	USHORT	eFuseData;
+	USHORT	LogicalAddress, BlkNum = 0xffff;
+	UCHAR	EFSROM_AOUT,Loop=0;
+	EFUSE_CTRL_STRUC		eFuseCtrlStruc;
+	USHORT	efuseDataOffset;
+	UINT32	data,tempbuffer;
+	USHORT addr,tmpaddr, InBuf[3], tmpOffset;
+	UINT32 buffer[4];
+	BOOLEAN		bWriteSuccess = TRUE;
+	BOOLEAN		bNotWrite=TRUE;
+	BOOLEAN		bAllocateNewBlk=TRUE;
+
+	DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegistersFromBin Offset=%x, pData=%04x:%04x:%04x:%04x\n", Offset, *pData,*(pData+1),*(pData+2),*(pData+3)));
+
+	do
+	{
+	//Step 0. find the entry in the mapping table
+	//The address of EEPROM is 2-bytes alignment.
+	//The last bit is used for alignment, so it must be 0.
+	Loop++;
+	tmpOffset = Offset & 0xfffe;
+	EFSROM_AOUT = eFuseReadRegisters(pAd, tmpOffset, 2, &eFuseData);
+
+	if( EFSROM_AOUT == 0x3f)
+	{	//find available logical address pointer
+		//the logical address does not exist, find an empty one
+		//from the first address of block 45=16*45=0x2d0 to the last address of block 47
+		//==>48*16-3(reserved)=2FC
+		bAllocateNewBlk=TRUE;
+		for (i=EFUSE_USAGE_MAP_START; i<=EFUSE_USAGE_MAP_END; i+=2)
+		{
+			//Retrive the logical block nubmer form each logical address pointer
+			//It will access two logical address pointer each time.
+			eFusePhysicalReadRegisters(pAd, i, 2, &LogicalAddress);
+			if( (LogicalAddress & 0xff) == 0)
+			{//Not used logical address pointer
+				BlkNum = i-EFUSE_USAGE_MAP_START;
+				break;
+			}
+			else if(( (LogicalAddress >> 8) & 0xff) == 0)
+			{//Not used logical address pointer
+				if (i != EFUSE_USAGE_MAP_END)
+				{
+					BlkNum = i-EFUSE_USAGE_MAP_START+1;
+				}
+				break;
+			}
+		}
+	}
+	else
+	{
+		bAllocateNewBlk=FALSE;
+		BlkNum = EFSROM_AOUT;
+	}
+
+	DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters BlkNum = %d \n", BlkNum));
+
+	if(BlkNum == 0xffff)
+	{
+		DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters: out of free E-fuse space!!!\n"));
+		return FALSE;
+	}
+	//Step 1.1.0
+	//If the block is not existing in mapping table, create one
+	//and write down the 16-bytes data to the new block
+	if(bAllocateNewBlk)
+	{
+		DBGPRINT(RT_DEBUG_TRACE, ("Allocate New Blk\n"));
+		efuseDataOffset =  EFUSE_DATA3;
+		for(i=0; i< 4; i++)
+		{
+			DBGPRINT(RT_DEBUG_TRACE, ("Allocate New Blk, Data%d=%04x%04x\n",3-i,pData[2*i+1],pData[2*i]));
+			tempbuffer=((pData[2*i+1]<<16)&0xffff0000)|pData[2*i];
+
+
+			RTMP_IO_WRITE32(pAd, efuseDataOffset,tempbuffer);
+			efuseDataOffset -= 4;
+
+		}
+		/////////////////////////////////////////////////////////////////
+
+		//Step1.1.1. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
+		eFuseCtrlStruc.field.EFSROM_AIN = BlkNum* 0x10 ;
+
+		//Step1.1.2. Write EFSROM_MODE (0x580, bit7:bit6) to 3.
+		eFuseCtrlStruc.field.EFSROM_MODE = 3;
+
+		//Step1.1.3. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical write procedure.
+		eFuseCtrlStruc.field.EFSROM_KICK = 1;
+
+		NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
+
+		RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
+
+		//Step1.1.4. Polling EFSROM_KICK(0x580, bit30) until it become 0 again. It��s done.
+		i = 0;
+		while(i < 100)
+		{
+			RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+
+			if(eFuseCtrlStruc.field.EFSROM_KICK == 0)
+				break;
+
+			RTMPusecDelay(2);
+			i++;
+		}
+
+	}
+	else
+	{	//Step1.2.
+		//If the same logical number is existing, check if the writting data and the data
+		//saving in this block are the same.
+		/////////////////////////////////////////////////////////////////
+		//read current values of 16-byte block
+		RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+
+		//Step1.2.0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
+		eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0;
+
+		//Step1.2.1. Write EFSROM_MODE (0x580, bit7:bit6) to 1.
+		eFuseCtrlStruc.field.EFSROM_MODE = 0;
+
+		//Step1.2.2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure.
+		eFuseCtrlStruc.field.EFSROM_KICK = 1;
+
+		NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
+		RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
+
+		//Step1.2.3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again.
+		i = 0;
+		while(i < 100)
+		{
+			RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+
+			if(eFuseCtrlStruc.field.EFSROM_KICK == 0)
+				break;
+			RTMPusecDelay(2);
+			i++;
+		}
+
+		//Step1.2.4. Read 16-byte of data from EFUSE_DATA0-3 (0x59C-0x590)
+		efuseDataOffset =  EFUSE_DATA3;
+		for(i=0; i< 4; i++)
+		{
+			RTMP_IO_READ32(pAd, efuseDataOffset, (PUINT32) &buffer[i]);
+			efuseDataOffset -=  4;
+		}
+		//Step1.2.5. Check if the data of efuse and the writing data are the same.
+		for(i =0; i<4; i++)
+		{
+			tempbuffer=((pData[2*i+1]<<16)&0xffff0000)|pData[2*i];
+			DBGPRINT(RT_DEBUG_TRACE, ("buffer[%d]=%x,pData[%d]=%x,pData[%d]=%x,tempbuffer=%x\n",i,buffer[i],2*i,pData[2*i],2*i+1,pData[2*i+1],tempbuffer));
+
+			if(((buffer[i]&0xffff0000)==(pData[2*i+1]<<16))&&((buffer[i]&0xffff)==pData[2*i]))
+				bNotWrite&=TRUE;
+			else
+			{
+				bNotWrite&=FALSE;
+				break;
+			}
+		}
+		if(!bNotWrite)
+		{
+		printk("The data is not the same\n");
+
+			for(i =0; i<8; i++)
+			{
+				addr = BlkNum * 0x10 ;
+
+				InBuf[0] = addr+2*i;
+				InBuf[1] = 2;
+				InBuf[2] = pData[i];
+
+				eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 2);
+			}
+
+		}
+		else
+			return TRUE;
+	     }
+
+
+
+		//Step 2. Write mapping table
+		addr = EFUSE_USAGE_MAP_START+BlkNum;
+
+		tmpaddr = addr;
+
+		if(addr % 2 != 0)
+			addr = addr -1;
+		InBuf[0] = addr;
+		InBuf[1] = 2;
+
+		//convert the address from 10 to 8 bit ( bit7, 6 = parity and bit5 ~ 0 = bit9~4), and write to logical map entry
+		tmpOffset = Offset;
+		tmpOffset >>= 4;
+		tmpOffset |= ((~((tmpOffset & 0x01) ^ ( tmpOffset >> 1 & 0x01) ^  (tmpOffset >> 2 & 0x01) ^  (tmpOffset >> 3 & 0x01))) << 6) & 0x40;
+		tmpOffset |= ((~( (tmpOffset >> 2 & 0x01) ^ (tmpOffset >> 3 & 0x01) ^ (tmpOffset >> 4 & 0x01) ^ ( tmpOffset >> 5 & 0x01))) << 7) & 0x80;
+
+		// write the logical address
+		if(tmpaddr%2 != 0)
+			InBuf[2] = tmpOffset<<8;
+		else
+			InBuf[2] = tmpOffset;
+
+		eFuseWritePhysical(pAd,&InBuf[0], 6, NULL, 0);
+
+		//Step 3. Compare data if not the same, invalidate the mapping entry, then re-write the data until E-fuse is exhausted
+		bWriteSuccess = TRUE;
+		for(i =0; i<8; i++)
+		{
+			addr = BlkNum * 0x10 ;
+
+			InBuf[0] = addr+2*i;
+			InBuf[1] = 2;
+			InBuf[2] = 0x0;
+
+			eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
+			DBGPRINT(RT_DEBUG_TRACE, ("addr=%x, buffer[i]=%x,InBuf[2]=%x\n",InBuf[0],pData[i],InBuf[2]));
+			if(pData[i] != InBuf[2])
+			{
+				bWriteSuccess = FALSE;
+				break;
+			}
+		}
+
+		//Step 4. invlidate mapping entry and find a free mapping entry if not succeed
+
+		if (!bWriteSuccess&&Loop<2)
+		{
+			DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegistersFromBin::Not bWriteSuccess BlkNum = %d\n", BlkNum));
+
+			// the offset of current mapping entry
+			addr = EFUSE_USAGE_MAP_START+BlkNum;
+
+			//find a new mapping entry
+			BlkNum = 0xffff;
+			for (i=EFUSE_USAGE_MAP_START; i<=EFUSE_USAGE_MAP_END; i+=2)
+			{
+				eFusePhysicalReadRegisters(pAd, i, 2, &LogicalAddress);
+				if( (LogicalAddress & 0xff) == 0)
+				{
+					BlkNum = i-EFUSE_USAGE_MAP_START;
+					break;
+				}
+				else if(( (LogicalAddress >> 8) & 0xff) == 0)
+				{
+					if (i != EFUSE_USAGE_MAP_END)
+					{
+						BlkNum = i+1-EFUSE_USAGE_MAP_START;
+					}
+					break;
+				}
+			}
+			DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegistersFromBin::Not bWriteSuccess new BlkNum = %d\n", BlkNum));
+			if(BlkNum == 0xffff)
+			{
+				DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegistersFromBin: out of free E-fuse space!!!\n"));
+				return FALSE;
+			}
+
+			//invalidate the original mapping entry if new entry is not found
+			tmpaddr = addr;
+
+			if(addr % 2 != 0)
+				addr = addr -1;
+			InBuf[0] = addr;
+			InBuf[1] = 2;
+
+			eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
+
+			// write the logical address
+			if(tmpaddr%2 != 0)
+			{
+				// Invalidate the high byte
+				for (i=8; i<15; i++)
+				{
+					if( ( (InBuf[2] >> i) & 0x01) == 0)
+					{
+						InBuf[2] |= (0x1 <<i);
+						break;
+					}
+				}
+			}
+			else
+			{
+				// invalidate the low byte
+				for (i=0; i<8; i++)
+				{
+					if( ( (InBuf[2] >> i) & 0x01) == 0)
+					{
+						InBuf[2] |= (0x1 <<i);
+						break;
+					}
+				}
+			}
+			eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 0);
+		}
+
+	}
+	while(!bWriteSuccess&&Loop<2);
+
+	return TRUE;
 }
 
+#endif // RT30xx //
+//2008/09/11:KH add to support efuse-->
diff --git a/drivers/staging/rt2860/common/md5.c b/drivers/staging/rt2860/common/md5.c
index 774776b4b8c..ad883ca2ffc 100644
--- a/drivers/staging/rt2860/common/md5.c
+++ b/drivers/staging/rt2860/common/md5.c
@@ -131,19 +131,7 @@ void hmac_md5(u8 *key, size_t key_len, u8 *data, size_t data_len, u8 *mac)
 	MD5Final(mac, &context);			 /*	finish up 2nd pass */
 }
 
-#ifndef RT_BIG_ENDIAN
 #define byteReverse(buf, len)   /* Nothing */
-#else
-void byteReverse(unsigned char *buf, unsigned longs);
-void byteReverse(unsigned char *buf, unsigned longs)
-{
-    do {
-        *(UINT32 *)buf = SWAP32(*(UINT32 *)buf);
-        buf += 4;
-    } while (--longs);
-}
-#endif
-
 
 /* ==========================  MD5 implementation =========================== */
 // four base functions for MD5
diff --git a/drivers/staging/rt2860/common/mlme.c b/drivers/staging/rt2860/common/mlme.c
index 2edf2999f5c..bb6fccbdca4 100644
--- a/drivers/staging/rt2860/common/mlme.c
+++ b/drivers/staging/rt2860/common/mlme.c
@@ -50,11 +50,7 @@ UCHAR	Ccx2QosInfo[] = {0x00, 0x40, 0x96, 0x04};
 UCHAR   RALINK_OUI[]  = {0x00, 0x0c, 0x43};
 UCHAR   BROADCOM_OUI[]  = {0x00, 0x90, 0x4c};
 UCHAR   WPS_OUI[] = {0x00, 0x50, 0xf2, 0x04};
-#ifdef CONFIG_STA_SUPPORT
-#ifdef DOT11_N_SUPPORT
 UCHAR	PRE_N_HT_OUI[]	= {0x00, 0x90, 0x4c};
-#endif // DOT11_N_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
 
 UCHAR RateSwitchTable[] = {
 // Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
@@ -130,7 +126,6 @@ UCHAR RateSwitchTable11G[] = {
     0x07, 0x10,  7, 10, 13,
 };
 
-#ifdef DOT11_N_SUPPORT
 UCHAR RateSwitchTable11N1S[] = {
 // Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
     0x09, 0x00,  0,  0,  0,						// Initial used item after association
@@ -287,7 +282,6 @@ UCHAR RateSwitchTable11BGN3SForABand[] = { // 3*3
     0x0a, 0x20, 23,  8, 25,
     0x0b, 0x22, 23,  8, 25,
 };
-#endif // DOT11_N_SUPPORT //
 
 PUCHAR ReasonString[] = {
 	/* 0  */	 "Reserved",
@@ -334,14 +328,9 @@ USHORT RateIdTo500Kbps[] = { 2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108, 144,
 UCHAR  SsidIe	 = IE_SSID;
 UCHAR  SupRateIe = IE_SUPP_RATES;
 UCHAR  ExtRateIe = IE_EXT_SUPP_RATES;
-#ifdef DOT11_N_SUPPORT
 UCHAR  HtCapIe = IE_HT_CAP;
 UCHAR  AddHtInfoIe = IE_ADD_HT;
 UCHAR  NewExtChanIe = IE_SECONDARY_CH_OFFSET;
-#ifdef DOT11N_DRAFT3
-UCHAR  ExtHtCapIe = IE_EXT_CAPABILITY;
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
 UCHAR  ErpIe	 = IE_ERP;
 UCHAR  DsIe 	 = IE_DS_PARM;
 UCHAR  TimIe	 = IE_TIM;
@@ -349,6 +338,9 @@ UCHAR  WpaIe	 = IE_WPA;
 UCHAR  Wpa2Ie	 = IE_WPA2;
 UCHAR  IbssIe	 = IE_IBSS_PARM;
 UCHAR  Ccx2Ie	 = IE_CCX_V2;
+#ifdef RT2870
+UCHAR  WapiIe	 = IE_WAPI;
+#endif
 
 extern UCHAR	WPA_OUI[];
 
@@ -457,7 +449,13 @@ FREQUENCY_ITEM FreqItems3020[] =
 	{13,   247,	 2,  2},
 	{14,   248,	 2,  4},
 };
+#ifndef RT30xx
 #define	NUM_OF_3020_CHNL	(sizeof(FreqItems3020) / sizeof(FREQUENCY_ITEM))
+#endif
+#ifdef RT30xx
+//2008/07/10:KH Modified to share this variable
+UCHAR	NUM_OF_3020_CHNL=(sizeof(FreqItems3020) / sizeof(FREQUENCY_ITEM));
+#endif
 
 /*
 	==========================================================================
@@ -488,8 +486,6 @@ NDIS_STATUS MlmeInit(
 		pAd->Mlme.bRunning = FALSE;
 		NdisAllocateSpinLock(&pAd->Mlme.TaskLock);
 
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			BssTableInit(&pAd->ScanTab);
 
@@ -501,18 +497,10 @@ NDIS_STATUS MlmeInit(
 			WpaPskStateMachineInit(pAd, &pAd->Mlme.WpaPskMachine, pAd->Mlme.WpaPskFunc);
 			AironetStateMachineInit(pAd, &pAd->Mlme.AironetMachine, pAd->Mlme.AironetFunc);
 
-#ifdef QOS_DLS_SUPPORT
-			DlsStateMachineInit(pAd, &pAd->Mlme.DlsMachine, pAd->Mlme.DlsFunc);
-#endif // QOS_DLS_SUPPORT //
-
-
 			// Since we are using switch/case to implement it, the init is different from the above
 			// state machine init
 			MlmeCntlInit(pAd, &pAd->Mlme.CntlMachine, NULL);
 		}
-#endif // CONFIG_STA_SUPPORT //
-
-
 
 		ActionStateMachineInit(pAd, &pAd->Mlme.ActMachine, pAd->Mlme.ActFunc);
 
@@ -525,9 +513,7 @@ NDIS_STATUS MlmeInit(
 		// software-based RX Antenna diversity
 		RTMPInitTimer(pAd, &pAd->Mlme.RxAntEvalTimer, GET_TIMER_FUNCTION(AsicRxAntEvalTimeout), pAd, FALSE);
 
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+#ifdef RT2860
 		{
 	        if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
 	        {
@@ -536,8 +522,7 @@ NDIS_STATUS MlmeInit(
 	    		RTMPInitTimer(pAd, &pAd->Mlme.RadioOnOffTimer, GET_TIMER_FUNCTION(RadioOnExec), pAd, FALSE);
 	        }
 		}
-#endif // CONFIG_STA_SUPPORT //
-
+#endif
 	} while (FALSE);
 
 	DBGPRINT(RT_DEBUG_TRACE, ("<-- MLME Initialize\n"));
@@ -563,9 +548,6 @@ VOID MlmeHandler(
 	IN PRTMP_ADAPTER pAd)
 {
 	MLME_QUEUE_ELEM 	   *Elem = NULL;
-#ifdef APCLI_SUPPORT
-	SHORT apcliIfIndex;
-#endif
 
 	// Only accept MLME and Frame from peer side, no other (control/data) frame should
 	// get into this state machine
@@ -592,23 +574,24 @@ VOID MlmeHandler(
 			break;
 		}
 
-#ifdef RALINK_ATE
-		if(ATE_ON(pAd))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now in MlmeHandler\n"));
-			break;
-		}
-#endif // RALINK_ATE //
-
 		//From message type, determine which state machine I should drive
 		if (MlmeDequeue(&pAd->Mlme.Queue, &Elem))
 		{
+#ifdef RT2870
+			if (Elem->MsgType == MT2_RESET_CONF)
+			{
+				DBGPRINT_RAW(RT_DEBUG_TRACE, ("!!! reset MLME state machine !!!\n"));
+				MlmeRestartStateMachine(pAd);
+				Elem->Occupied = FALSE;
+				Elem->MsgLen = 0;
+				continue;
+			}
+#endif // RT2870 //
 
 			// if dequeue success
 			switch (Elem->Machine)
 			{
 				// STA state machines
-#ifdef	CONFIG_STA_SUPPORT
 				case ASSOC_STATE_MACHINE:
 					StateMachinePerformAction(pAd, &pAd->Mlme.AssocMachine, Elem);
 					break;
@@ -627,22 +610,9 @@ VOID MlmeHandler(
 				case WPA_PSK_STATE_MACHINE:
 					StateMachinePerformAction(pAd, &pAd->Mlme.WpaPskMachine, Elem);
 					break;
-#ifdef LEAP_SUPPORT
-				case LEAP_STATE_MACHINE:
-					LeapMachinePerformAction(pAd, &pAd->Mlme.LeapMachine, Elem);
-					break;
-#endif
 				case AIRONET_STATE_MACHINE:
 					StateMachinePerformAction(pAd, &pAd->Mlme.AironetMachine, Elem);
 					break;
-
-#ifdef QOS_DLS_SUPPORT
-				case DLS_STATE_MACHINE:
-					StateMachinePerformAction(pAd, &pAd->Mlme.DlsMachine, Elem);
-					break;
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
 				case ACTION_STATE_MACHINE:
 					StateMachinePerformAction(pAd, &pAd->Mlme.ActMachine, Elem);
 					break;
@@ -687,6 +657,9 @@ VOID MlmeHalt(
 	IN PRTMP_ADAPTER pAd)
 {
 	BOOLEAN 	  Cancelled;
+#ifdef RT3070
+	UINT32		TxPinCfg = 0x00050F0F;
+#endif // RT3070 //
 
 	DBGPRINT(RT_DEBUG_TRACE, ("==> MlmeHalt\n"));
 
@@ -696,12 +669,7 @@ VOID MlmeHalt(
 		AsicDisableSync(pAd);
 	}
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
-#ifdef QOS_DLS_SUPPORT
-		UCHAR		i;
-#endif // QOS_DLS_SUPPORT //
 		// Cancel pending timers
 		RTMPCancelTimer(&pAd->MlmeAux.AssocTimer,		&Cancelled);
 		RTMPCancelTimer(&pAd->MlmeAux.ReassocTimer,		&Cancelled);
@@ -709,20 +677,14 @@ VOID MlmeHalt(
 		RTMPCancelTimer(&pAd->MlmeAux.AuthTimer,		&Cancelled);
 		RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer,		&Cancelled);
 		RTMPCancelTimer(&pAd->MlmeAux.ScanTimer,		&Cancelled);
+#ifdef RT2860
 	    if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
 	    {
 	   	    RTMPCancelTimer(&pAd->Mlme.PsPollTimer,		&Cancelled);
 		    RTMPCancelTimer(&pAd->Mlme.RadioOnOffTimer,		&Cancelled);
 		}
-
-#ifdef QOS_DLS_SUPPORT
-		for (i=0; i<MAX_NUM_OF_DLS_ENTRY; i++)
-		{
-			RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &Cancelled);
-		}
-#endif // QOS_DLS_SUPPORT //
+#endif
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	RTMPCancelTimer(&pAd->Mlme.PeriodicTimer,		&Cancelled);
 	RTMPCancelTimer(&pAd->Mlme.RxAntEvalTimer,		&Cancelled);
@@ -734,6 +696,27 @@ VOID MlmeHalt(
 		// Set LED
 		RTMPSetLED(pAd, LED_HALT);
         RTMPSetSignalLED(pAd, -100);	// Force signal strength Led to be turned off, firmware is not done it.
+#ifdef RT2870
+        {
+            LED_CFG_STRUC LedCfg;
+            RTMP_IO_READ32(pAd, LED_CFG, &LedCfg.word);
+            LedCfg.field.LedPolar = 0;
+            LedCfg.field.RLedMode = 0;
+            LedCfg.field.GLedMode = 0;
+            LedCfg.field.YLedMode = 0;
+            RTMP_IO_WRITE32(pAd, LED_CFG, LedCfg.word);
+        }
+#endif // RT2870 //
+#ifdef RT3070
+		//
+		// Turn off LNA_PE
+		//
+		if (IS_RT3070(pAd) || IS_RT3071(pAd))
+		{
+			TxPinCfg &= 0xFFFFF0F0;
+			RTUSBWriteMACRegister(pAd, TX_PIN_CFG, TxPinCfg);
+		}
+#endif // RT3070 //
 	}
 
 	RTMPusecDelay(5000);    //  5 msec to gurantee Ant Diversity timer canceled
@@ -804,6 +787,7 @@ VOID MlmePeriodicExec(
 	ULONG			TxTotalCnt;
 	PRTMP_ADAPTER	pAd = (RTMP_ADAPTER *)FunctionContext;
 
+#ifdef RT2860
 	//Baron 2008/07/10
 	//printk("Baron_Test:\t%s", RTMPGetRalinkEncryModeStr(pAd->StaCfg.WepStatus));
 	//If the STA security setting is OPEN or WEP, pAd->StaCfg.WpaSupplicantUP = 0.
@@ -817,8 +801,6 @@ VOID MlmePeriodicExec(
 		pAd->StaCfg.WpaSupplicantUP = 1;
 	}
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 	    // If Hardware controlled Radio enabled, we have to check GPIO pin2 every 2 second.
 		// Move code to here, because following code will return when radio is off
@@ -858,7 +840,7 @@ VOID MlmePeriodicExec(
 			}
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
+#endif /* RT2860 */
 
 	// Do nothing if the driver is starting halt state.
 	// This might happen when timer already been fired before cancel timer with mlmehalt
@@ -868,7 +850,7 @@ VOID MlmePeriodicExec(
 								fRTMP_ADAPTER_RESET_IN_PROGRESS))))
 		return;
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+#ifdef RT2860
 	{
 		if ((pAd->RalinkCounters.LastReceivedByteCount == pAd->RalinkCounters.ReceivedByteCount) && (pAd->StaCfg.bRadio == TRUE))
 		{
@@ -906,23 +888,9 @@ VOID MlmePeriodicExec(
 			AsicResetFromDMABusy(pAd);
 		}
 	}
-
+#endif /* RT2860 */
 	RT28XX_MLME_PRE_SANITY_CHECK(pAd);
 
-#ifdef RALINK_ATE
-	/* Do not show RSSI until "Normal 1 second Mlme PeriodicExec". */
-	if (ATE_ON(pAd))
-	{
-		if (pAd->Mlme.PeriodicRound % MLME_TASK_EXEC_MULTIPLE != (MLME_TASK_EXEC_MULTIPLE - 1))
-	{
-			pAd->Mlme.PeriodicRound ++;
-			return;
-		}
-	}
-#endif // RALINK_ATE //
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Do nothing if monitor mode is on
 		if (MONITOR_ON(pAd))
@@ -947,26 +915,26 @@ VOID MlmePeriodicExec(
 				}
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	pAd->bUpdateBcnCntDone = FALSE;
 
 //	RECBATimerTimeout(SystemSpecific1,FunctionContext,SystemSpecific2,SystemSpecific3);
 	pAd->Mlme.PeriodicRound ++;
 
+#ifdef RT3070
+	// execute every 100ms, update the Tx FIFO Cnt for update Tx Rate.
+	NICUpdateFifoStaCounters(pAd);
+#endif // RT3070 //
 	// execute every 500ms
 	if ((pAd->Mlme.PeriodicRound % 5 == 0) && RTMPAutoRateSwitchCheck(pAd)/*(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED))*/)
 	{
-#ifdef CONFIG_STA_SUPPORT
 		// perform dynamic tx rate switching based on past TX history
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
 					)
 				&& (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)))
 				MlmeDynamicTxRateSwitching(pAd);
 		}
-#endif // CONFIG_STA_SUPPORT //
 	}
 
 	// Normal 1 second Mlme PeriodicExec.
@@ -974,30 +942,6 @@ VOID MlmePeriodicExec(
 	{
                 pAd->Mlme.OneSecPeriodicRound ++;
 
-#ifdef RALINK_ATE
-    	if (ATE_ON(pAd))
-    	{
-			/* request from Baron : move this routine from later to here */
-			/* for showing Rx error count in ATE RXFRAME */
-            NICUpdateRawCounters(pAd);
-			if (pAd->ate.bRxFer == 1)
-			{
-				pAd->ate.RxTotalCnt += pAd->ate.RxCntPerSec;
-			    ate_print(KERN_EMERG "MlmePeriodicExec: Rx packet cnt = %d/%d\n", pAd->ate.RxCntPerSec, pAd->ate.RxTotalCnt);
-				pAd->ate.RxCntPerSec = 0;
-
-				if (pAd->ate.RxAntennaSel == 0)
-					ate_print(KERN_EMERG "MlmePeriodicExec: Rx AvgRssi0=%d, AvgRssi1=%d, AvgRssi2=%d\n\n",
-						pAd->ate.AvgRssi0, pAd->ate.AvgRssi1, pAd->ate.AvgRssi2);
-				else
-					ate_print(KERN_EMERG "MlmePeriodicExec: Rx AvgRssi=%d\n\n", pAd->ate.AvgRssi0);
-			}
-			MlmeResetRalinkCounters(pAd);
-			return;
-    	}
-#endif // RALINK_ATE //
-
-
 		if (rx_Total)
 		{
 
@@ -1029,12 +973,12 @@ VOID MlmePeriodicExec(
 		// the dynamic tuning mechanism below are based on most up-to-date information
 		NICUpdateRawCounters(pAd);
 
+#ifdef RT2870
+		RT2870_WatchDog(pAd);
+#endif // RT2870 //
 
-#ifdef DOT11_N_SUPPORT
    		// Need statistics after read counter. So put after NICUpdateRawCounters
 		ORIBATimerTimeout(pAd);
-#endif // DOT11_N_SUPPORT //
-
 
 		// The time period for checking antenna is according to traffic
 		if (pAd->Mlme.bEnableAutoAntennaCheck)
@@ -1043,6 +987,7 @@ VOID MlmePeriodicExec(
 							 pAd->RalinkCounters.OneSecTxRetryOkCount +
 							 pAd->RalinkCounters.OneSecTxFailCount;
 
+			// dynamic adjust antenna evaluation period according to the traffic
 			if (TxTotalCnt > 50)
 			{
 				if (pAd->Mlme.OneSecPeriodicRound % 10 == 0)
@@ -1059,17 +1004,14 @@ VOID MlmePeriodicExec(
 			}
 		}
 
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			STAMlmePeriodicExec(pAd);
-#endif // CONFIG_STA_SUPPORT //
+		STAMlmePeriodicExec(pAd);
 
 		MlmeResetRalinkCounters(pAd);
 
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
+#ifdef RT2860
 			if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST) && (pAd->bPCIclkOff == FALSE))
+#endif
 			{
 				// When Adhoc beacon is enabled and RTS/CTS is enabled, there is a chance that hardware MAC FSM will run into a deadlock
 				// and sending CTS-to-self over and over.
@@ -1091,41 +1033,32 @@ VOID MlmePeriodicExec(
 				}
 			}
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 		RT28XX_MLME_HANDLER(pAd);
 	}
 
-
 	pAd->bUpdateBcnCntDone = FALSE;
 }
 
-#ifdef CONFIG_STA_SUPPORT
 VOID STAMlmePeriodicExec(
 	PRTMP_ADAPTER pAd)
 {
+#ifdef RT2860
 	ULONG			    TxTotalCnt;
+#endif
+#ifdef RT2870
+	ULONG	TxTotalCnt;
+	int 	i;
+#endif
 
-//
-// We return here in ATE mode, because the statistics
-// that ATE needs are not collected via this routine.
-//
-#ifdef RALINK_ATE
-	// It is supposed that we will never reach here in ATE mode.
-	ASSERT(!(ATE_ON(pAd)));
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-#ifdef WPA_SUPPLICANT_SUPPORT
     if (pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_DISABLE)
-#endif // WPA_SUPPLICANT_SUPPORT //
     {
     	// WPA MIC error should block association attempt for 60 seconds
     	if (pAd->StaCfg.bBlockAssoc && (pAd->StaCfg.LastMicErrorTime + (60 * OS_HZ) < pAd->Mlme.Now32))
     		pAd->StaCfg.bBlockAssoc = FALSE;
     }
 
+#ifdef RT2860
 	//Baron 2008/07/10
 	//printk("Baron_Test:\t%s", RTMPGetRalinkEncryModeStr(pAd->StaCfg.WepStatus));
 	//If the STA security setting is OPEN or WEP, pAd->StaCfg.WpaSupplicantUP = 0.
@@ -1138,6 +1071,7 @@ VOID STAMlmePeriodicExec(
 	{
 		pAd->StaCfg.WpaSupplicantUP = 1;
 	}
+#endif
 
     if ((pAd->PreMediaState != pAd->IndicateMediaState) && (pAd->CommonCfg.bWirelessEvent))
 	{
@@ -1148,6 +1082,7 @@ VOID STAMlmePeriodicExec(
 		pAd->PreMediaState = pAd->IndicateMediaState;
 	}
 
+#ifdef RT2860
 	if ((pAd->OpMode == OPMODE_STA) && (IDLE_ON(pAd)) &&
         (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) &&
 		(pAd->Mlme.SyncMachine.CurrState == SYNC_IDLE) &&
@@ -1157,6 +1092,7 @@ VOID STAMlmePeriodicExec(
 	{
 		RT28xxPciAsicRadioOff(pAd, GUI_IDLE_POWER_SAVE, 0);
 	}
+#endif
 
 
 
@@ -1179,11 +1115,6 @@ VOID STAMlmePeriodicExec(
 
 	if (INFRA_ON(pAd))
 	{
-#ifdef QOS_DLS_SUPPORT
-		// Check DLS time out, then tear down those session
-		RTMPCheckDLSTimeOut(pAd);
-#endif // QOS_DLS_SUPPORT //
-
 		// Is PSM bit consistent with user power management policy?
 		// This is the only place that will set PSM bit ON.
 		if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
@@ -1228,26 +1159,11 @@ VOID STAMlmePeriodicExec(
 			// Lost AP, send disconnect & link down event
 			LinkDown(pAd, FALSE);
 
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-            if (pAd->StaCfg.WpaSupplicantUP)
-			{
-                union iwreq_data    wrqu;
-                //send disassociate event to wpa_supplicant
-                memset(&wrqu, 0, sizeof(wrqu));
-                wrqu.data.flags = RT_DISASSOC_EVENT_FLAG;
-                wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL);
-            }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
             {
                 union iwreq_data    wrqu;
                 memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN);
                 wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
             }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
 
 			MlmeAutoReconnectLastSSID(pAd);
 		}
@@ -1273,6 +1189,7 @@ VOID STAMlmePeriodicExec(
 	}
 	else if (ADHOC_ON(pAd))
 	{
+#ifdef RT2860
 		// 2003-04-17 john. this is a patch that driver forces a BEACON out if ASIC fails
 		// the "TX BEACON competition" for the entire past 1 sec.
 		// So that even when ASIC's BEACONgen engine been blocked
@@ -1297,7 +1214,6 @@ VOID STAMlmePeriodicExec(
 			pAd->StaCfg.AdhocBOnlyJoined = FALSE;
 		}
 
-#ifdef DOT11_N_SUPPORT
 		if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
 		{
 			if ((pAd->StaCfg.AdhocBGJoined) &&
@@ -1314,7 +1230,7 @@ VOID STAMlmePeriodicExec(
 				pAd->StaCfg.Adhoc20NJoined = FALSE;
 			}
 		}
-#endif // DOT11_N_SUPPORT //
+#endif /* RT2860 */
 
 		//radar detect
 		if ((pAd->CommonCfg.Channel > 14)
@@ -1339,6 +1255,19 @@ VOID STAMlmePeriodicExec(
 			MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_START_REQ, sizeof(MLME_START_REQ_STRUCT), &StartReq);
 			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_START;
 		}
+
+#ifdef RT2870
+		for (i = 1; i < MAX_LEN_OF_MAC_TABLE; i++)
+		{
+			MAC_TABLE_ENTRY *pEntry = &pAd->MacTab.Content[i];
+
+			if (pEntry->ValidAsCLI == FALSE)
+				continue;
+
+			if (pEntry->LastBeaconRxTime + ADHOC_BEACON_LOST_TIME < pAd->Mlme.Now32)
+				MacTableDeleteEntry(pAd, pEntry->Aid, pEntry->Addr);
+		}
+#endif
 	}
 	else // no INFRA nor ADHOC connection
 	{
@@ -1378,14 +1307,6 @@ VOID STAMlmePeriodicExec(
 				}
 				else
 				{
-#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier
-					if (pAd->CommonCfg.CarrierDetect.Enable == TRUE)
-					{
-						if ((pAd->Mlme.OneSecPeriodicRound % 5) == 1)
-							MlmeAutoReconnectLastSSID(pAd);
-					}
-					else
-#endif // CARRIER_DETECTION_SUPPORT //
 						MlmeAutoReconnectLastSSID(pAd);
 				}
 			}
@@ -1394,7 +1315,6 @@ VOID STAMlmePeriodicExec(
 
 SKIP_AUTO_SCAN_CONN:
 
-#ifdef DOT11_N_SUPPORT
     if ((pAd->MacTab.Content[BSSID_WCID].TXBAbitmap !=0) && (pAd->MacTab.fAnyBASession == FALSE))
 	{
 		pAd->MacTab.fAnyBASession = TRUE;
@@ -1405,15 +1325,6 @@ SKIP_AUTO_SCAN_CONN:
 		pAd->MacTab.fAnyBASession = FALSE;
 		AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode,  ALLN_SETPROTECT, FALSE, FALSE);
 	}
-#endif // DOT11_N_SUPPORT //
-
-
-#ifdef DOT11_N_SUPPORT
-#ifdef DOT11N_DRAFT3
-	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_SCAN_2040))
-		TriEventCounterMaintenance(pAd);
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
 
 	return;
 }
@@ -1473,7 +1384,6 @@ VOID MlmeAutoReconnectLastSSID(
 		RT28XX_MLME_HANDLER(pAd);
 	}
 }
-#endif // CONFIG_STA_SUPPORT //
 
 /*
 	==========================================================================
@@ -1522,15 +1432,19 @@ VOID MlmeSelectTxRateTable(
 			break;
 		}
 
-#ifdef CONFIG_STA_SUPPORT
 		if ((pAd->OpMode == OPMODE_STA) && ADHOC_ON(pAd))
 		{
-#ifdef DOT11_N_SUPPORT
 			if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) &&
+#ifdef RT2860
 				!pAd->StaCfg.AdhocBOnlyJoined &&
 				!pAd->StaCfg.AdhocBGJoined &&
 				(pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) &&
 				((pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1)))
+#endif
+#ifdef RT2870
+				(pEntry->HTCapability.MCSSet[0] == 0xff) &&
+				((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1)))
+#endif
 			{// 11N 1S Adhoc
 				*ppTable = RateSwitchTable11N1S;
 				*pTableSize = RateSwitchTable11N1S[0];
@@ -1538,10 +1452,16 @@ VOID MlmeSelectTxRateTable(
 
 			}
 			else if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) &&
+#ifdef RT2860
 					!pAd->StaCfg.AdhocBOnlyJoined &&
 					!pAd->StaCfg.AdhocBGJoined &&
 					(pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) &&
 					(pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0xff) &&
+#endif
+#ifdef RT2870
+					(pEntry->HTCapability.MCSSet[0] == 0xff) &&
+					(pEntry->HTCapability.MCSSet[1] == 0xff) &&
+#endif
 					(pAd->Antenna.field.TxPath == 2))
 			{// 11N 2S Adhoc
 				if (pAd->LatchRfRegs.Channel <= 14)
@@ -1559,7 +1479,7 @@ VOID MlmeSelectTxRateTable(
 
 			}
 			else
-#endif // DOT11_N_SUPPORT //
+#ifdef RT2860
 				if (pAd->CommonCfg.PhyMode == PHY_11B)
 			{
 				*ppTable = RateSwitchTable11B;
@@ -1568,6 +1488,12 @@ VOID MlmeSelectTxRateTable(
 
 			}
 	        else if((pAd->LatchRfRegs.Channel <= 14) && (pAd->StaCfg.AdhocBOnlyJoined == TRUE))
+#endif
+#ifdef RT2870
+				if ((pEntry->RateLen == 4)
+					&& (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)
+					)
+#endif
 			{
 				// USe B Table when Only b-only Station in my IBSS .
 				*ppTable = RateSwitchTable11B;
@@ -1591,9 +1517,7 @@ VOID MlmeSelectTxRateTable(
 			}
 			break;
 		}
-#endif // CONFIG_STA_SUPPORT //
 
-#ifdef DOT11_N_SUPPORT
 		if ((pEntry->RateLen == 12) && (pEntry->HTCapability.MCSSet[0] == 0xff) &&
 			((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->CommonCfg.TxStream == 1)))
 		{// 11BGN 1S AP
@@ -1650,12 +1574,13 @@ VOID MlmeSelectTxRateTable(
 
 			break;
 		}
-#endif // DOT11_N_SUPPORT //
+
 		//else if ((pAd->StaActive.SupRateLen == 4) && (pAd->StaActive.ExtRateLen == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
 		if ((pEntry->RateLen == 4)
-#ifdef DOT11_N_SUPPORT
+#ifndef RT30xx
+//Iverson mark for Adhoc b mode,sta will use rate 54  Mbps when connect with sta b/g/n mode
 			&& (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)
-#endif // DOT11_N_SUPPORT //
+#endif
 			)
 		{// B only AP
 			*ppTable = RateSwitchTable11B;
@@ -1667,9 +1592,7 @@ VOID MlmeSelectTxRateTable(
 
 		//else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen > 8) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
 		if ((pEntry->RateLen > 8)
-#ifdef DOT11_N_SUPPORT
 			&& (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)
-#endif // DOT11_N_SUPPORT //
 			)
 		{// B/G  mixed AP
 			*ppTable = RateSwitchTable11BG;
@@ -1681,9 +1604,7 @@ VOID MlmeSelectTxRateTable(
 
 		//else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 8) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
 		if ((pEntry->RateLen == 8)
-#ifdef DOT11_N_SUPPORT
 			&& (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)
-#endif // DOT11_N_SUPPORT //
 			)
 		{// G only AP
 			*ppTable = RateSwitchTable11G;
@@ -1692,16 +1613,10 @@ VOID MlmeSelectTxRateTable(
 
 			break;
 		}
-#ifdef DOT11_N_SUPPORT
-#endif // DOT11_N_SUPPORT //
 
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
-#ifdef DOT11_N_SUPPORT
 			//else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
 			if ((pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0))
-#endif // DOT11_N_SUPPORT //
 			{	// Legacy mode
 				if (pAd->CommonCfg.MaxTxRate <= RATE_11)
 				{
@@ -1724,7 +1639,7 @@ VOID MlmeSelectTxRateTable(
 				}
 				break;
 			}
-#ifdef DOT11_N_SUPPORT
+
 			if (pAd->LatchRfRegs.Channel <= 14)
 			{
 				if (pAd->CommonCfg.TxStream == 1)
@@ -1759,15 +1674,13 @@ VOID MlmeSelectTxRateTable(
 					DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode,default use 11N 2S AP \n"));
 				}
 			}
-#endif // DOT11_N_SUPPORT //
+
 			DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode (SupRateLen=%d, ExtRateLen=%d, MCSSet[0]=0x%x, MCSSet[1]=0x%x)\n",
 				pAd->StaActive.SupRateLen, pAd->StaActive.ExtRateLen, pAd->StaActive.SupportedPhyInfo.MCSSet[0], pAd->StaActive.SupportedPhyInfo.MCSSet[1]));
 		}
-#endif // CONFIG_STA_SUPPORT //
 	} while(FALSE);
 }
 
-#ifdef CONFIG_STA_SUPPORT
 /*
 	==========================================================================
 	Description:
@@ -1921,14 +1834,6 @@ VOID MlmeCalculateChannelQuality(
 	CHAR  MaxRssi;
 	ULONG BeaconLostTime = BEACON_LOST_TIME;
 
-#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier
-	// longer beacon lost time when carrier detection enabled
-	if (pAd->CommonCfg.CarrierDetect.Enable == TRUE)
-	{
-		BeaconLostTime = BEACON_LOST_TIME + BEACON_LOST_TIME/2;
-	}
-#endif // CARRIER_DETECTION_SUPPORT //
-
 	MaxRssi = RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.LastRssi0, pAd->StaCfg.RssiSample.LastRssi1, pAd->StaCfg.RssiSample.LastRssi2);
 
 	//
@@ -1993,13 +1898,11 @@ VOID MlmeSetTxRate(
 {
 	UCHAR	MaxMode = MODE_OFDM;
 
-#ifdef DOT11_N_SUPPORT
 	MaxMode = MODE_HTGREENFIELD;
 
 	if (pTxRate->STBC && (pAd->StaCfg.MaxHTPhyMode.field.STBC) && (pAd->Antenna.field.TxPath == 2))
 		pAd->StaCfg.HTPhyMode.field.STBC = STBC_USE;
 	else
-#endif // DOT11_N_SUPPORT //
 		pAd->StaCfg.HTPhyMode.field.STBC = STBC_NONE;
 
 	if (pTxRate->CurrMCS < MCS_AUTO)
@@ -2029,14 +1932,11 @@ VOID MlmeSetTxRate(
 		if (pTxRate->Mode <= MaxMode)
 			pAd->StaCfg.HTPhyMode.field.MODE = pTxRate->Mode;
 
-#ifdef DOT11_N_SUPPORT
 		if (pTxRate->ShortGI && (pAd->StaCfg.MaxHTPhyMode.field.ShortGI))
 			pAd->StaCfg.HTPhyMode.field.ShortGI = GI_400;
 		else
-#endif // DOT11_N_SUPPORT //
 			pAd->StaCfg.HTPhyMode.field.ShortGI = GI_800;
 
-#ifdef DOT11_N_SUPPORT
 		// Reexam each bandwidth's SGI support.
 		if (pAd->StaCfg.HTPhyMode.field.ShortGI == GI_400)
 		{
@@ -2080,17 +1980,15 @@ VOID MlmeSetTxRate(
 		{
 			AsicUpdateProtect(pAd, HT_RTSCTS_6M, ALLN_SETPROTECT, TRUE, (BOOLEAN)pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent);
 		}
-#endif // DOT11_N_SUPPORT //
 
 		pEntry->HTPhyMode.field.STBC	= pAd->StaCfg.HTPhyMode.field.STBC;
 		pEntry->HTPhyMode.field.ShortGI	= pAd->StaCfg.HTPhyMode.field.ShortGI;
 		pEntry->HTPhyMode.field.MCS		= pAd->StaCfg.HTPhyMode.field.MCS;
 		pEntry->HTPhyMode.field.MODE	= pAd->StaCfg.HTPhyMode.field.MODE;
-#ifdef DOT11_N_SUPPORT
+
 		if ((pAd->StaCfg.MaxHTPhyMode.field.MODE == MODE_HTGREENFIELD) &&
 		    pAd->WIFItestbed.bGreenField)
 		    pEntry->HTPhyMode.field.MODE = MODE_HTGREENFIELD;
-#endif // DOT11_N_SUPPORT //
 	}
 
 	pAd->LastTxRate = (USHORT)(pEntry->HTPhyMode.word);
@@ -2130,18 +2028,6 @@ VOID MlmeDynamicTxRateSwitching(
 	ULONG					TxRetransmit = 0, TxSuccess = 0, TxFailCount = 0;
 	MAC_TABLE_ENTRY			*pEntry;
 
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-	{
-		return;
-	}
-#endif // RALINK_ATE //
-
-	/*if (pAd->Antenna.field.RxPath > 1)
-		Rssi = (pAd->StaCfg.RssiSample.AvgRssi0 + pAd->StaCfg.RssiSample.AvgRssi1) >> 1;
-	else
-		Rssi = pAd->StaCfg.RssiSample.AvgRssi0;*/
-
 	//
 	// walk through MAC table, see if need to change AP's TX rate toward each entry
 	//
@@ -2155,7 +2041,15 @@ VOID MlmeDynamicTxRateSwitching(
 
 		if ((pAd->MacTab.Size == 1) || (pEntry->ValidAsDls))
 		{
+#ifdef RT2860
 			Rssi = RTMPMaxRssi(pAd, (CHAR)pAd->StaCfg.RssiSample.AvgRssi0, (CHAR)pAd->StaCfg.RssiSample.AvgRssi1, (CHAR)pAd->StaCfg.RssiSample.AvgRssi2);
+#endif
+#ifdef RT2870
+			Rssi = RTMPMaxRssi(pAd,
+							   pAd->StaCfg.RssiSample.AvgRssi0,
+							   pAd->StaCfg.RssiSample.AvgRssi1,
+							   pAd->StaCfg.RssiSample.AvgRssi2);
+#endif
 
 			// Update statistic counter
 			RTMP_IO_READ32(pAd, TX_STA_CNT0, &TxStaCnt0.word);
@@ -2185,7 +2079,21 @@ VOID MlmeDynamicTxRateSwitching(
 		}
 		else
 		{
+#ifdef RT2860
 			Rssi = RTMPMaxRssi(pAd, (CHAR)pEntry->RssiSample.AvgRssi0, (CHAR)pEntry->RssiSample.AvgRssi1, (CHAR)pEntry->RssiSample.AvgRssi2);
+#endif
+#ifdef RT2870
+			if (INFRA_ON(pAd) && (i == 1))
+				Rssi = RTMPMaxRssi(pAd,
+								   pAd->StaCfg.RssiSample.AvgRssi0,
+								   pAd->StaCfg.RssiSample.AvgRssi1,
+								   pAd->StaCfg.RssiSample.AvgRssi2);
+			else
+				Rssi = RTMPMaxRssi(pAd,
+								   pEntry->RssiSample.AvgRssi0,
+								   pEntry->RssiSample.AvgRssi1,
+								   pEntry->RssiSample.AvgRssi2);
+#endif
 
 			TxTotalCnt = pEntry->OneSecTxNoRetryOkCount +
 				 pEntry->OneSecTxRetryOkCount +
@@ -2242,14 +2150,12 @@ VOID MlmeDynamicTxRateSwitching(
 
 		pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(CurrRateIdx+1)*5];
 
-#ifdef DOT11_N_SUPPORT
 		if ((Rssi > -65) && (pCurrTxRate->Mode >= MODE_HTMIX))
 		{
 			TrainUp		= (pCurrTxRate->TrainUp + (pCurrTxRate->TrainUp >> 1));
 			TrainDown	= (pCurrTxRate->TrainDown + (pCurrTxRate->TrainDown >> 1));
 		}
 		else
-#endif // DOT11_N_SUPPORT //
 		{
 			TrainUp		= pCurrTxRate->TrainUp;
 			TrainDown	= pCurrTxRate->TrainDown;
@@ -2327,7 +2233,6 @@ VOID MlmeDynamicTxRateSwitching(
 				{
 					MCS14 = idx;
 				}
-				//else if ((pCurrTxRate->CurrMCS == MCS_15)/* && (pCurrTxRate->ShortGI == GI_800)*/)	//we hope to use ShortGI as initial rate
 				else if ((pCurrTxRate->CurrMCS == MCS_15) && (pCurrTxRate->ShortGI == GI_800))	//we hope to use ShortGI as initial rate, however Atheros's chip has bugs when short GI
 				{
 					MCS15 = idx;
@@ -2373,7 +2278,7 @@ VOID MlmeDynamicTxRateSwitching(
 					RssiOffset = 8;
 				}
 			}
-#ifdef DOT11_N_SUPPORT
+
 			/*if (MCS15)*/
 			if ((pTable == RateSwitchTable11BGN3S) ||
 				(pTable == RateSwitchTable11N3S) ||
@@ -2439,7 +2344,6 @@ VOID MlmeDynamicTxRateSwitching(
 					TxRateIdx = MCS0;
 			}
 			else
-#endif // DOT11_N_SUPPORT //
 			{// Legacy mode
 				if (MCS7 && (Rssi > -70))
 					TxRateIdx = MCS7;
@@ -2613,7 +2517,12 @@ VOID StaQuickResponeForRateUpExec(
 	UCHAR					UpRateIdx = 0, DownRateIdx = 0, CurrRateIdx = 0;
 	ULONG					TxTotalCnt;
 	ULONG					TxErrorRatio = 0;
+#ifdef RT2860
 	BOOLEAN					bTxRateChanged = TRUE; //, bUpgradeQuality = FALSE;
+#endif
+#ifdef RT2870
+	BOOLEAN					bTxRateChanged; //, bUpgradeQuality = FALSE;
+#endif
 	PRTMP_TX_RATE_SWITCH	pCurrTxRate, pNextTxRate = NULL;
 	PUCHAR					pTable;
 	UCHAR					TableSize = 0;
@@ -2638,11 +2547,25 @@ VOID StaQuickResponeForRateUpExec(
 		if (RTMPCheckEntryEnableAutoRateSwitch(pAd, pEntry) == FALSE)
 			continue;
 
+#ifdef RT2860
 		//Rssi = RTMPMaxRssi(pAd, (CHAR)pAd->StaCfg.AvgRssi0, (CHAR)pAd->StaCfg.AvgRssi1, (CHAR)pAd->StaCfg.AvgRssi2);
 	    if (pAd->Antenna.field.TxPath > 1)
 			Rssi = (pAd->StaCfg.RssiSample.AvgRssi0 + pAd->StaCfg.RssiSample.AvgRssi1) >> 1;
 		else
 			Rssi = pAd->StaCfg.RssiSample.AvgRssi0;
+#endif
+#ifdef RT2870
+		if (INFRA_ON(pAd) && (i == 1))
+			Rssi = RTMPMaxRssi(pAd,
+							   pAd->StaCfg.RssiSample.AvgRssi0,
+							   pAd->StaCfg.RssiSample.AvgRssi1,
+							   pAd->StaCfg.RssiSample.AvgRssi2);
+		else
+			Rssi = RTMPMaxRssi(pAd,
+							   pEntry->RssiSample.AvgRssi0,
+							   pEntry->RssiSample.AvgRssi1,
+							   pEntry->RssiSample.AvgRssi2);
+#endif
 
 		CurrRateIdx = pAd->CommonCfg.TxRateIndex;
 
@@ -2667,14 +2590,12 @@ VOID StaQuickResponeForRateUpExec(
 
 		pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(CurrRateIdx+1)*5];
 
-#ifdef DOT11_N_SUPPORT
 		if ((Rssi > -65) && (pCurrTxRate->Mode >= MODE_HTMIX))
 		{
 			TrainUp		= (pCurrTxRate->TrainUp + (pCurrTxRate->TrainUp >> 1));
 			TrainDown	= (pCurrTxRate->TrainDown + (pCurrTxRate->TrainDown >> 1));
 		}
 		else
-#endif // DOT11_N_SUPPORT //
 		{
 			TrainUp		= pCurrTxRate->TrainUp;
 			TrainDown	= pCurrTxRate->TrainDown;
@@ -2784,6 +2705,9 @@ VOID StaQuickResponeForRateUpExec(
 			pAd->DrsCounters.TxRateUpPenalty = 0;
 			NdisZeroMemory(pAd->DrsCounters.TxQuality, sizeof(USHORT) * MAX_STEP_OF_TX_RATE_SWITCH);
 			NdisZeroMemory(pAd->DrsCounters.PER, sizeof(UCHAR) * MAX_STEP_OF_TX_RATE_SWITCH);
+#ifdef RT2870
+			bTxRateChanged = TRUE;
+#endif
 		}
 		// if rate-down happen, only clear DownRate's bad history
 		else if (pAd->CommonCfg.TxRateIndex < CurrRateIdx)
@@ -2793,6 +2717,9 @@ VOID StaQuickResponeForRateUpExec(
 			pAd->DrsCounters.TxRateUpPenalty = 0;           // no penalty
 			pAd->DrsCounters.TxQuality[pAd->CommonCfg.TxRateIndex] = 0;
 			pAd->DrsCounters.PER[pAd->CommonCfg.TxRateIndex] = 0;
+#ifdef RT2870
+			bTxRateChanged = TRUE;
+#endif
 		}
 		else
 		{
@@ -2848,7 +2775,13 @@ VOID MlmeCheckPsmChange(
 	if (INFRA_ON(pAd) &&
 		(PowerMode != Ndis802_11PowerModeCAM) &&
 		(pAd->StaCfg.Psm == PWR_ACTIVE) &&
+#ifdef RT2860
 		RTMP_TEST_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP))
+#endif
+#if !defined(RT2860) && !defined(RT30xx)
+		(pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE))
+#endif
+#ifndef RT30xx
 	{
 		NdisGetSystemUpTime(&pAd->Mlme.LastSendNULLpsmTime);
 		pAd->RalinkCounters.RxCountSinceLastNULL = 0;
@@ -2862,6 +2795,42 @@ VOID MlmeCheckPsmChange(
 			RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, TRUE);
 		}
 	}
+#endif
+#ifdef RT30xx
+//		(! RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
+		(pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) /*&&
+		(pAd->RalinkCounters.OneSecTxNoRetryOkCount == 0) &&
+		(pAd->RalinkCounters.OneSecTxRetryOkCount == 0)*/)
+	{
+		// add by johnli, use Rx OK data count per second to calculate throughput
+		// If Ttraffic is too high ( > 400 Rx per second), don't go to sleep mode. If tx rate is low, use low criteria
+		// Mode=CCK/MCS=3 => 11 Mbps, Mode=OFDM/MCS=3 => 18 Mbps
+		if (((pAd->StaCfg.HTPhyMode.field.MCS <= 3) &&
+/* Iverson mark
+				(pAd->StaCfg.HTPhyMode.field.MODE <= MODE_OFDM) &&
+*/
+				(pAd->RalinkCounters.OneSecRxOkDataCnt < (ULONG)100)) ||
+			((pAd->StaCfg.HTPhyMode.field.MCS > 3) &&
+/* Iverson mark
+			(pAd->StaCfg.HTPhyMode.field.MODE > MODE_OFDM) &&
+*/
+			(pAd->RalinkCounters.OneSecRxOkDataCnt < (ULONG)400)))
+		{
+				// Get this time
+			NdisGetSystemUpTime(&pAd->Mlme.LastSendNULLpsmTime);
+			pAd->RalinkCounters.RxCountSinceLastNULL = 0;
+			MlmeSetPsmBit(pAd, PWR_SAVE);
+			if (!(pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable))
+			{
+				RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, FALSE);
+			}
+			else
+			{
+				RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, TRUE);
+			}
+		}
+	}
+#endif
 }
 
 // IRQL = PASSIVE_LEVEL
@@ -2876,10 +2845,10 @@ VOID MlmeSetPsmBit(
 	RTMP_IO_READ32(pAd, AUTO_RSP_CFG, &csr4.word);
 	csr4.field.AckCtsPsmBit = (psm == PWR_SAVE)? 1:0;
 	RTMP_IO_WRITE32(pAd, AUTO_RSP_CFG, csr4.word);
+#ifndef RT30xx
 	DBGPRINT(RT_DEBUG_TRACE, ("MlmeSetPsmBit = %d\n", psm));
+#endif
 }
-#endif // CONFIG_STA_SUPPORT //
-
 
 // IRQL = DISPATCH_LEVEL
 VOID MlmeSetTxPreamble(
@@ -3018,9 +2987,6 @@ VOID MlmeUpdateTxRates(
 
 //===========================================================================
 //===========================================================================
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		pHtPhy 		= &pAd->StaCfg.HTPhyMode;
 		pMaxHtPhy	= &pAd->StaCfg.MaxHTPhyMode;
@@ -3036,7 +3002,6 @@ VOID MlmeUpdateTxRates(
 			MaxDesire = RATE_11;
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	pAd->CommonCfg.MaxDesiredRate = MaxDesire;
 	pMinHtPhy->word = 0;
@@ -3065,7 +3030,6 @@ VOID MlmeUpdateTxRates(
 	}
 #endif
 
-#ifdef CONFIG_STA_SUPPORT
 	if ((ADHOC_ON(pAd) || INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA))
 	{
 		pSupRate = &pAd->StaActive.SupRate[0];
@@ -3074,7 +3038,6 @@ VOID MlmeUpdateTxRates(
 		ExtRateLen = pAd->StaActive.ExtRateLen;
 	}
 	else
-#endif // CONFIG_STA_SUPPORT //
 	{
 		pSupRate = &pAd->CommonCfg.SupRate[0];
 		pExtRate = &pAd->CommonCfg.ExtRate[0];
@@ -3151,10 +3114,9 @@ VOID MlmeUpdateTxRates(
 	if (*auto_rate_cur_p)
 	{
 		short dbm = 0;
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			dbm = pAd->StaCfg.RssiSample.AvgRssi0 - pAd->BbpRssiToDbmDelta;
-#endif // CONFIG_STA_SUPPORT //
+
+		dbm = pAd->StaCfg.RssiSample.AvgRssi0 - pAd->BbpRssiToDbmDelta;
+
 		if (bLinkUp == TRUE)
 			pAd->CommonCfg.TxRate = RATE_24;
 		else
@@ -3212,9 +3174,7 @@ VOID MlmeUpdateTxRates(
 		{
 			case PHY_11BG_MIXED:
 			case PHY_11B:
-#ifdef DOT11_N_SUPPORT
 			case PHY_11BGN_MIXED:
-#endif // DOT11_N_SUPPORT //
 				pAd->CommonCfg.MlmeRate = RATE_1;
 				pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK;
 				pAd->CommonCfg.MlmeTransmit.field.MCS = RATE_1;
@@ -3222,22 +3182,18 @@ VOID MlmeUpdateTxRates(
 				break;
 			case PHY_11G:
 			case PHY_11A:
-#ifdef DOT11_N_SUPPORT
 			case PHY_11AGN_MIXED:
 			case PHY_11GN_MIXED:
 			case PHY_11N_2_4G:
 			case PHY_11AN_MIXED:
 			case PHY_11N_5G:
-#endif // DOT11_N_SUPPORT //
 				pAd->CommonCfg.MlmeRate = RATE_6;
 				pAd->CommonCfg.RtsRate = RATE_6;
 				pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM;
 				pAd->CommonCfg.MlmeTransmit.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate];
 				break;
 			case PHY_11ABG_MIXED:
-#ifdef DOT11_N_SUPPORT
 			case PHY_11ABGN_MIXED:
-#endif // DOT11_N_SUPPORT //
 				if (pAd->CommonCfg.Channel <= 14)
 				{
 					pAd->CommonCfg.MlmeRate = RATE_1;
@@ -3280,7 +3236,6 @@ VOID MlmeUpdateTxRates(
 			 pAd->CommonCfg.MlmeTransmit.word, pAd->MacTab.Content[BSSID_WCID].MinHTPhyMode.word ,pAd->MacTab.Content[BSSID_WCID].MaxHTPhyMode.word ,pAd->MacTab.Content[BSSID_WCID].HTPhyMode.word ));
 }
 
-#ifdef DOT11_N_SUPPORT
 /*
 	==========================================================================
 	Description:
@@ -3313,8 +3268,6 @@ VOID MlmeUpdateHtTxRates(
 
 	auto_rate_cur_p = NULL;
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		pDesireHtPhy	= &pAd->StaCfg.DesiredHtPhyInfo;
 		pActiveHtPhy	= &pAd->StaCfg.DesiredHtPhyInfo;
@@ -3324,9 +3277,7 @@ VOID MlmeUpdateHtTxRates(
 
 		auto_rate_cur_p = &pAd->StaCfg.bAutoTxRateSwitch;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
-#ifdef CONFIG_STA_SUPPORT
 	if ((ADHOC_ON(pAd) || INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA))
 	{
 		if (pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE)
@@ -3342,7 +3293,6 @@ VOID MlmeUpdateHtTxRates(
 			pMaxHtPhy->field.STBC = STBC_NONE;
 	}
 	else
-#endif // CONFIG_STA_SUPPORT //
 	{
 		if (pDesireHtPhy->bHtEnable == FALSE)
 			return;
@@ -3393,7 +3343,6 @@ VOID MlmeUpdateHtTxRates(
 	pMinHtPhy->field.STBC = 0;
 	pMinHtPhy->field.ShortGI = 0;
 	//If STA assigns fixed rate. update to fixed here.
-#ifdef CONFIG_STA_SUPPORT
 	if ( (pAd->OpMode == OPMODE_STA) && (pDesireHtPhy->MCSSet[0] != 0xff))
 	{
 		if (pDesireHtPhy->MCSSet[4] != 0)
@@ -3417,8 +3366,6 @@ VOID MlmeUpdateHtTxRates(
 				break;
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
-
 
 	// Decide ht rate
 	pHtPhy->field.STBC = pMaxHtPhy->field.STBC;
@@ -3438,7 +3385,6 @@ VOID MlmeUpdateHtTxRates(
 		pHtPhy->field.BW, pHtPhy->field.ShortGI, pHtPhy->field.MODE));
 	DBGPRINT(RT_DEBUG_TRACE,("MlmeUpdateHtTxRates<=== \n"));
 }
-#endif // DOT11_N_SUPPORT //
 
 // IRQL = DISPATCH_LEVEL
 VOID MlmeRadioOff(
@@ -3483,7 +3429,6 @@ VOID BssTableInit(
 	}
 }
 
-#ifdef DOT11_N_SUPPORT
 VOID BATableInit(
 	IN PRTMP_ADAPTER pAd,
     IN BA_TABLE *Tab)
@@ -3503,7 +3448,6 @@ VOID BATableInit(
 		Tab->BAOriEntry[i].ORI_BA_Status = Originator_NONE;
 	}
 }
-#endif // DOT11_N_SUPPORT //
 
 /*! \brief search the BSS table by SSID
  *	\param p_tab pointer to the bss table
@@ -3613,7 +3557,6 @@ VOID BssTableDeleteEntry(
 	}
 }
 
-#ifdef DOT11_N_SUPPORT
 /*
 	========================================================================
 	Routine Description:
@@ -3645,7 +3588,6 @@ VOID BATableDeleteORIEntry(
 		NdisReleaseSpinLock(&pAd->BATabLock);
 	}
 }
-#endif // DOT11_N_SUPPORT //
 
 /*! \brief
  *	\param
@@ -3762,7 +3704,7 @@ VOID BssEntrySet(
 
 	pBss->AddHtInfoLen = 0;
 	pBss->HtCapabilityLen = 0;
-#ifdef DOT11_N_SUPPORT
+
 	if (HtCapabilityLen> 0)
 	{
 		pBss->HtCapabilityLen = HtCapabilityLen;
@@ -3782,7 +3724,6 @@ VOID BssEntrySet(
 				}
 		}
 	}
-#endif // DOT11_N_SUPPORT //
 
 	BssCipherParse(pBss);
 
@@ -3800,8 +3741,6 @@ VOID BssEntrySet(
 	else
 		pBss->QbssLoad.bValid = FALSE;
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		PEID_STRUCT     pEid;
 		USHORT          Length = 0;
@@ -3809,11 +3748,9 @@ VOID BssEntrySet(
 
 		NdisZeroMemory(&pBss->WpaIE.IE[0], MAX_CUSTOM_LEN);
 		NdisZeroMemory(&pBss->RsnIE.IE[0], MAX_CUSTOM_LEN);
-#ifdef EXT_BUILD_CHANNEL_LIST
-		NdisZeroMemory(&pBss->CountryString[0], 3);
-		pBss->bHasCountryIE = FALSE;
-#endif // EXT_BUILD_CHANNEL_LIST //
+
 		pEid = (PEID_STRUCT) pVIE;
+
 		while ((Length + 2 + (USHORT)pEid->Len) <= LengthVIE)
 		{
 			switch(pEid->Eid)
@@ -3842,18 +3779,11 @@ VOID BssEntrySet(
 						NdisMoveMemory(pBss->RsnIE.IE, pEid, pBss->RsnIE.IELen);
 			}
 				break;
-#ifdef EXT_BUILD_CHANNEL_LIST
-				case IE_COUNTRY:
-					NdisMoveMemory(&pBss->CountryString[0], pEid->Octet, 3);
-					pBss->bHasCountryIE = TRUE;
-					break;
-#endif // EXT_BUILD_CHANNEL_LIST //
             }
 			Length = Length + 2 + (USHORT)pEid->Len;  // Eid[1] + Len[1]+ content[Len]
 			pEid = (PEID_STRUCT)((UCHAR*)pEid + 2 + pEid->Len);
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 }
 
 /*!
@@ -3947,119 +3877,22 @@ ULONG BssTableSetEntry(
 	}
 	else
 	{
+#ifdef RT30xx
+		/* avoid  Hidden SSID form beacon to overwirite correct SSID from probe response */
+		if ((SSID_EQUAL(Ssid, SsidLen, Tab->BssEntry[Idx].Ssid, Tab->BssEntry[Idx].SsidLen)) ||
+			(NdisEqualMemory(Tab->BssEntry[Idx].Ssid, ZeroSsid, Tab->BssEntry[Idx].SsidLen)))
+		{
+#endif
 		BssEntrySet(pAd, &Tab->BssEntry[Idx], pBssid, Ssid, SsidLen, BssType, BeaconPeriod,CfParm, AtimWin,
 					CapabilityInfo, SupRate, SupRateLen, ExtRate, ExtRateLen,pHtCapability, pAddHtInfo,HtCapabilityLen, AddHtInfoLen,
 					NewExtChanOffset, ChannelNo, Rssi, TimeStamp, CkipFlag, pEdcaParm, pQosCapability, pQbssLoad, LengthVIE, pVIE);
-	}
-
-	return Idx;
-}
-
-#ifdef CONFIG_STA_SUPPORT
-#ifdef DOT11_N_SUPPORT
-#ifdef DOT11N_DRAFT3
-VOID  TriEventInit(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	UCHAR		i;
-
-	for (i = 0;i < MAX_TRIGGER_EVENT;i++)
-		pAd->CommonCfg.TriggerEventTab.EventA[i].bValid = FALSE;
-
-	pAd->CommonCfg.TriggerEventTab.EventANo = 0;
-	pAd->CommonCfg.TriggerEventTab.EventBCountDown = 0;
-}
-
-ULONG TriEventTableSetEntry(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT TRIGGER_EVENT_TAB *Tab,
-	IN PUCHAR pBssid,
-	IN HT_CAPABILITY_IE *pHtCapability,
-	IN UCHAR			HtCapabilityLen,
-	IN UCHAR			RegClass,
-	IN UCHAR ChannelNo)
-{
-	// Event A
-	if (HtCapabilityLen == 0)
-	{
-		if (Tab->EventANo < MAX_TRIGGER_EVENT)
-		{
-			RTMPMoveMemory(Tab->EventA[Tab->EventANo].BSSID, pBssid, 6);
-			Tab->EventA[Tab->EventANo].bValid = TRUE;
-			Tab->EventA[Tab->EventANo].Channel = ChannelNo;
-			Tab->EventA[Tab->EventANo].CDCounter = pAd->CommonCfg.Dot11BssWidthChanTranDelay;
-			if (RegClass != 0)
-			{
-				// Beacon has Regulatory class IE. So use beacon's
-				Tab->EventA[Tab->EventANo].RegClass = RegClass;
-			}
-			else
-			{
-				// Use Station's Regulatory class instead.
-				if (pAd->StaActive.SupportedHtPhy.bHtEnable == TRUE)
-				{
-					if (pAd->CommonCfg.CentralChannel > pAd->CommonCfg.Channel)
-					{
-						Tab->EventA[Tab->EventANo].RegClass = 32;
-					}
-					else if (pAd->CommonCfg.CentralChannel < pAd->CommonCfg.Channel)
-						Tab->EventA[Tab->EventANo].RegClass = 33;
-				}
-				else
-					Tab->EventA[Tab->EventANo].RegClass = ??;
-
-			}
-
-			Tab->EventANo ++;
-		}
-	}
-	else if (pHtCapability->HtCapInfo.Intolerant40)
-	{
-		Tab->EventBCountDown = pAd->CommonCfg.Dot11BssWidthChanTranDelay;
-	}
-
-}
-
-/*
-	========================================================================
-	Routine Description:
-		Trigger Event table Maintainence called once every second.
-
-	Arguments:
-	// IRQL = DISPATCH_LEVEL
-	========================================================================
-*/
-VOID TriEventCounterMaintenance(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	UCHAR		i;
-	BOOLEAN			bNotify = FALSE;
-	for (i = 0;i < MAX_TRIGGER_EVENT;i++)
-	{
-		if (pAd->CommonCfg.TriggerEventTab.EventA[i].bValid && (pAd->CommonCfg.TriggerEventTab.EventA[i].CDCounter > 0))
-		{
-			pAd->CommonCfg.TriggerEventTab.EventA[i].CDCounter--;
-			if (pAd->CommonCfg.TriggerEventTab.EventA[i].CDCounter == 0)
-			{
-				pAd->CommonCfg.TriggerEventTab.EventA[i].bValid = FALSE;
-				pAd->CommonCfg.TriggerEventTab.EventANo --;
-				// Need to send 20/40 Coexistence Notify frame if has status change.
-				bNotify = TRUE;
-			}
+#ifdef RT30xx
 		}
-	}
-	if (pAd->CommonCfg.TriggerEventTab.EventBCountDown > 0)
-	{
-		pAd->CommonCfg.TriggerEventTab.EventBCountDown--;
-		if (pAd->CommonCfg.TriggerEventTab.EventBCountDown == 0)
-			bNotify = TRUE;
+#endif
 	}
 
-	if (bNotify == TRUE)
-		Update2040CoexistFrameAndNotify(pAd, BSSID_WCID, TRUE);
+	return Idx;
 }
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
 
 // IRQL = DISPATCH_LEVEL
 VOID BssTableSsidSort(
@@ -4079,9 +3912,6 @@ VOID BssTableSsidSort(
 		if (((pAd->CommonCfg.bIEEE80211H == 1) &&
             (pAd->MlmeAux.Channel > 14) &&
              RadarChannelCheck(pAd, pInBss->Channel))
-#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier
-             || (pAd->CommonCfg.CarrierDetect.Enable == TRUE)
-#endif // CARRIER_DETECTION_SUPPORT //
             )
 		{
 			if (pInBss->Hidden)
@@ -4093,18 +3923,6 @@ VOID BssTableSsidSort(
 		{
 			BSS_ENTRY *pOutBss = &OutTab->BssEntry[OutTab->BssNr];
 
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-			// If no Country IE exists no Connection will be established when IEEE80211dClientMode is strict.
-			if ((pAd->StaCfg.IEEE80211dClientMode == Rt802_11_D_Strict) &&
-				(pInBss->bHasCountryIE == FALSE))
-			{
-				DBGPRINT(RT_DEBUG_TRACE,("StaCfg.IEEE80211dClientMode == Rt802_11_D_Strict, but this AP doesn't have country IE.\n"));
-				continue;
-			}
-#endif // EXT_BUILD_CHANNEL_LIST //
-
-#ifdef DOT11_N_SUPPORT
 			// 2.4G/5G N only mode
 			if ((pInBss->HtCapabilityLen == 0) &&
 				((pAd->CommonCfg.PhyMode == PHY_11N_2_4G) || (pAd->CommonCfg.PhyMode == PHY_11N_5G)))
@@ -4112,7 +3930,6 @@ VOID BssTableSsidSort(
 				DBGPRINT(RT_DEBUG_TRACE,("STA is in N-only Mode, this AP don't have Ht capability in Beacon.\n"));
 				continue;
 			}
-#endif // DOT11_N_SUPPORT //
 
 			// New for WPA2
 			// Check the Authmode first
@@ -4132,9 +3949,14 @@ VOID BssTableSsidSort(
 							continue;
 
 					// check group cipher
+#ifndef RT30xx
 					if ((pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) &&
 						(pInBss->WPA.GroupCipher != Ndis802_11GroupWEP40Enabled) &&
 						(pInBss->WPA.GroupCipher != Ndis802_11GroupWEP104Enabled))
+#endif
+#ifdef RT30xx
+					if (pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher)
+#endif
 						continue;
 
 					// check pairwise cipher, skip if none matched
@@ -4153,9 +3975,14 @@ VOID BssTableSsidSort(
 							continue;
 
 					// check group cipher
+#ifndef RT30xx
 					if ((pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) &&
 						(pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP40Enabled) &&
 						(pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP104Enabled))
+#endif
+#ifdef RT30xx
+					if (pAd->StaCfg.WepStatus < pInBss->WPA2.GroupCipher)
+#endif
 						continue;
 
 					// check pairwise cipher, skip if none matched
@@ -4185,7 +4012,6 @@ VOID BssTableSsidSort(
 			if (SsidLen == 0)
 				continue;
 
-#ifdef DOT11_N_SUPPORT
 			// If both station and AP use 40MHz, still need to check if the 40MHZ band's legality in my country region
 			// If this 40MHz wideband is not allowed in my country list, use bandwidth 20MHZ instead,
 			if ((pInBss->CentralChannel != pInBss->Channel) &&
@@ -4205,7 +4031,6 @@ VOID BssTableSsidSort(
 					}
 				}
 			}
-#endif // DOT11_N_SUPPORT //
 
 			// copy matching BSS from InTab to OutTab
 			NdisMoveMemory(pOutBss, pInBss, sizeof(BSS_ENTRY));
@@ -4216,8 +4041,6 @@ VOID BssTableSsidSort(
 		{
 			BSS_ENTRY *pOutBss = &OutTab->BssEntry[OutTab->BssNr];
 
-
-#ifdef DOT11_N_SUPPORT
 			// 2.4G/5G N only mode
 			if ((pInBss->HtCapabilityLen == 0) &&
 				((pAd->CommonCfg.PhyMode == PHY_11N_2_4G) || (pAd->CommonCfg.PhyMode == PHY_11N_5G)))
@@ -4225,7 +4048,6 @@ VOID BssTableSsidSort(
 				DBGPRINT(RT_DEBUG_TRACE,("STA is in N-only Mode, this AP don't have Ht capability in Beacon.\n"));
 				continue;
 			}
-#endif // DOT11_N_SUPPORT //
 
 			// New for WPA2
 			// Check the Authmode first
@@ -4281,7 +4103,6 @@ VOID BssTableSsidSort(
 			else if (pAd->StaCfg.WepStatus != pInBss->WepStatus)
 					continue;
 
-#ifdef DOT11_N_SUPPORT
 			// If both station and AP use 40MHz, still need to check if the 40MHZ band's legality in my country region
 			// If this 40MHz wideband is not allowed in my country list, use bandwidth 20MHZ instead,
 			if ((pInBss->CentralChannel != pInBss->Channel) &&
@@ -4294,7 +4115,6 @@ VOID BssTableSsidSort(
 					pAd->CommonCfg.RegTransmitSetting.field.BW = BW_40;
 				}
 			}
-#endif // DOT11_N_SUPPORT //
 
 			// copy matching BSS from InTab to OutTab
 			NdisMoveMemory(pOutBss, pInBss, sizeof(BSS_ENTRY));
@@ -4330,8 +4150,6 @@ VOID BssTableSortByRssi(
 		}
 	}
 }
-#endif // CONFIG_STA_SUPPORT //
-
 
 VOID BssCipherParse(
 	IN OUT	PBSS_ENTRY	pBss)
@@ -4442,10 +4260,16 @@ VOID BssCipherParse(
 				switch (*pTmp)
 				{
 					case 1:
+#ifndef RT30xx
 						pBss->WPA.GroupCipher = Ndis802_11GroupWEP40Enabled;
 						break;
 					case 5:
 						pBss->WPA.GroupCipher = Ndis802_11GroupWEP104Enabled;
+#endif
+#ifdef RT30xx
+					case 5:	// Although WEP is not allowed in WPA related auth mode, we parse it anyway
+						pBss->WPA.GroupCipher = Ndis802_11Encryption1Enabled;
+#endif
 						break;
 					case 2:
 						pBss->WPA.GroupCipher = Ndis802_11Encryption2Enabled;
@@ -4532,7 +4356,6 @@ VOID BssCipherParse(
 					pBss->AuthMode	  = Ndis802_11AuthModeWPANone;
 					pBss->AuthModeAux = Ndis802_11AuthModeWPANone;
 					pBss->WepStatus   = pBss->WPA.GroupCipher;
-					// Patched bugs for old driver
 					if (pBss->WPA.PairCipherAux == Ndis802_11WEPDisabled)
 						pBss->WPA.PairCipherAux = pBss->WPA.GroupCipher;
 				}
@@ -4562,10 +4385,16 @@ VOID BssCipherParse(
 				switch (pCipher->Type)
 				{
 					case 1:
+#ifndef RT30xx
 						pBss->WPA2.GroupCipher = Ndis802_11GroupWEP40Enabled;
 						break;
 					case 5:
 						pBss->WPA2.GroupCipher = Ndis802_11GroupWEP104Enabled;
+#endif
+#ifdef RT30xx
+					case 5:	// Although WEP is not allowed in WPA related auth mode, we parse it anyway
+						pBss->WPA2.GroupCipher = Ndis802_11Encryption1Enabled;
+#endif
 						break;
 					case 2:
 						pBss->WPA2.GroupCipher = Ndis802_11Encryption2Enabled;
@@ -4659,7 +4488,6 @@ VOID BssCipherParse(
 					pBss->WPA.PairCipherAux = pBss->WPA2.PairCipherAux;
 					pBss->WPA.GroupCipher	= pBss->WPA2.GroupCipher;
 					pBss->WepStatus 		= pBss->WPA.GroupCipher;
-					// Patched bugs for old driver
 					if (pBss->WPA.PairCipherAux == Ndis802_11WEPDisabled)
 						pBss->WPA.PairCipherAux = pBss->WPA.GroupCipher;
 				}
@@ -4735,10 +4563,9 @@ VOID MgtMacHeaderInit(
 	pHdr80211->FC.SubType = SubType;
 	pHdr80211->FC.ToDs = ToDs;
 	COPY_MAC_ADDR(pHdr80211->Addr1, pDA);
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		COPY_MAC_ADDR(pHdr80211->Addr2, pAd->CurrentAddress);
-#endif // CONFIG_STA_SUPPORT //
+
+	COPY_MAC_ADDR(pHdr80211->Addr2, pAd->CurrentAddress);
+
 	COPY_MAC_ADDR(pHdr80211->Addr3, pBssid);
 }
 
@@ -4925,12 +4752,6 @@ BOOLEAN MlmeEnqueueForRecv(
 	INT		 MsgType;
 	MLME_QUEUE	*Queue = (MLME_QUEUE *)&pAd->Mlme.Queue;
 
-#ifdef RALINK_ATE
-	/* Nothing to do in ATE mode */
-	if(ATE_ON(pAd))
-		return FALSE;
-#endif // RALINK_ATE //
-
 	// Do nothing if the driver is starting halt state.
 	// This might happen when timer already been fired before cancel timer with mlmehalt
 	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
@@ -4951,8 +4772,6 @@ BOOLEAN MlmeEnqueueForRecv(
 		return FALSE;
 	}
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (!MsgTypeSubst(pAd, pFrame, &Machine, &MsgType))
 		{
@@ -4960,7 +4779,6 @@ BOOLEAN MlmeEnqueueForRecv(
 			return FALSE;
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// OK, we got all the informations, it is time to put things into queue
 	NdisAcquireSpinLock(&(Queue->Lock));
@@ -5028,13 +4846,14 @@ BOOLEAN MlmeDequeue(
 VOID	MlmeRestartStateMachine(
 	IN	PRTMP_ADAPTER	pAd)
 {
+#ifdef RT2860
 	MLME_QUEUE_ELEM		*Elem = NULL;
-#ifdef CONFIG_STA_SUPPORT
+#endif
 	BOOLEAN				Cancelled;
-#endif // CONFIG_STA_SUPPORT //
 
 	DBGPRINT(RT_DEBUG_TRACE, ("MlmeRestartStateMachine \n"));
 
+#ifdef RT2860
 	NdisAcquireSpinLock(&pAd->Mlme.TaskLock);
 	if(pAd->Mlme.bRunning)
 	{
@@ -5062,13 +4881,9 @@ VOID	MlmeRestartStateMachine(
 			DBGPRINT_ERR(("MlmeRestartStateMachine: MlmeQueue empty\n"));
 		}
 	}
+#endif /* RT2860 */
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
-#ifdef QOS_DLS_SUPPORT
-		UCHAR i;
-#endif // QOS_DLS_SUPPORT //
 		// Cancel all timer events
 		// Be careful to cancel new added timer
 		RTMPCancelTimer(&pAd->MlmeAux.AssocTimer,	  &Cancelled);
@@ -5077,15 +4892,7 @@ VOID	MlmeRestartStateMachine(
 		RTMPCancelTimer(&pAd->MlmeAux.AuthTimer,	   &Cancelled);
 		RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer,	   &Cancelled);
 		RTMPCancelTimer(&pAd->MlmeAux.ScanTimer,	   &Cancelled);
-
-#ifdef QOS_DLS_SUPPORT
-		for (i=0; i<MAX_NUM_OF_DLS_ENTRY; i++)
-		{
-			RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &Cancelled);
-		}
-#endif // QOS_DLS_SUPPORT //
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// Change back to original channel in case of doing scan
 	AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
@@ -5094,8 +4901,6 @@ VOID	MlmeRestartStateMachine(
 	// Resume MSDU which is turned off durning scan
 	RTMPResumeMsduTransmission(pAd);
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Set all state machines back IDLE
 		pAd->Mlme.CntlMachine.CurrState    = CNTL_IDLE;
@@ -5104,16 +4909,14 @@ VOID	MlmeRestartStateMachine(
 		pAd->Mlme.AuthRspMachine.CurrState = AUTH_RSP_IDLE;
 		pAd->Mlme.SyncMachine.CurrState    = SYNC_IDLE;
 		pAd->Mlme.ActMachine.CurrState    = ACT_IDLE;
-#ifdef QOS_DLS_SUPPORT
-		pAd->Mlme.DlsMachine.CurrState    = DLS_IDLE;
-#endif // QOS_DLS_SUPPORT //
 	}
-#endif // CONFIG_STA_SUPPORT //
 
+#ifdef RT2860
 	// Remove running state
 	NdisAcquireSpinLock(&pAd->Mlme.TaskLock);
 	pAd->Mlme.bRunning = FALSE;
 	NdisReleaseSpinLock(&pAd->Mlme.TaskLock);
+#endif
 }
 
 /*! \brief	test if the MLME Queue is empty
@@ -5191,7 +4994,6 @@ VOID MlmeQueueDestroy(
  IRQL = DISPATCH_LEVEL
 
  */
-#ifdef CONFIG_STA_SUPPORT
 BOOLEAN MsgTypeSubst(
 	IN PRTMP_ADAPTER  pAd,
 	IN PFRAME_802_11 pFrame,
@@ -5215,16 +5017,6 @@ BOOLEAN MsgTypeSubst(
 			*MsgType = MT2_AIRONET_MSG;
 			return (TRUE);
 		}
-#ifdef LEAP_SUPPORT
-		if ( pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP ) //LEAP
-		{
-			// LEAP frames
-			*Machine = LEAP_STATE_MACHINE;
-			EAPType = *((UCHAR*)pFrame + LENGTH_802_11 + LENGTH_802_1_H + 1);
-			return (LeapMsgTypeSubst(EAPType, MsgType));
-		}
-		else
-#endif // LEAP_SUPPORT //
 		{
 			*Machine = WPA_PSK_STATE_MACHINE;
 			EAPType = *((UCHAR*)pFrame + LENGTH_802_11 + LENGTH_802_1_H + 1);
@@ -5311,7 +5103,6 @@ BOOLEAN MsgTypeSubst(
 
 	return TRUE;
 }
-#endif // CONFIG_STA_SUPPORT //
 
 // ===========================================================================================
 // state_machine.c
@@ -5533,7 +5324,6 @@ VOID AsicUpdateAutoFallBackTable(
 					}
 				}
 				break;
-#ifdef DOT11_N_SUPPORT
 			case 2:		//HT-MIX
 			case 3:		//HT-GF
 				{
@@ -5595,7 +5385,6 @@ VOID AsicUpdateAutoFallBackTable(
 					}
 				}
 				break;
-#endif // DOT11_N_SUPPORT //
 		}
 
 		pNextTxRate = pCurrTxRate;
@@ -5637,12 +5426,6 @@ VOID 	AsicUpdateProtect(
 	UCHAR			i;
 	UINT32 MacReg = 0;
 
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-#ifdef DOT11_N_SUPPORT
 	if (!(pAd->CommonCfg.bHTProtect) && (OperationMode != 8))
 	{
 		return;
@@ -5656,19 +5439,14 @@ VOID 	AsicUpdateProtect(
 		SetMask = ALLN_SETPROTECT;
 		OperationMode = 8;
 	}
-#endif // DOT11_N_SUPPORT //
 
 	// Config ASIC RTS threshold register
 	RTMP_IO_READ32(pAd, TX_RTS_CFG, &MacReg);
 	MacReg &= 0xFF0000FF;
-#if 0
-	MacReg |= (pAd->CommonCfg.RtsThreshold << 8);
-#else
+
 	// If the user want disable RtsThreshold and enable Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
         if ((
-#ifdef DOT11_N_SUPPORT
 			(pAd->CommonCfg.BACapability.field.AmsduEnable) ||
-#endif // DOT11_N_SUPPORT //
 			(pAd->CommonCfg.bAggregationCapable == TRUE))
             && pAd->CommonCfg.RtsThreshold == MAX_RTS_THRESHOLD)
         {
@@ -5678,7 +5456,6 @@ VOID 	AsicUpdateProtect(
         {
 			MacReg |= (pAd->CommonCfg.RtsThreshold << 8);
         }
-#endif
 
 	RTMP_IO_WRITE32(pAd, TX_RTS_CFG, MacReg);
 
@@ -5717,7 +5494,6 @@ VOID 	AsicUpdateProtect(
 		Protect[1] = ProtCfg.word;
 	}
 
-#ifdef DOT11_N_SUPPORT
 	// Decide HT frame protection.
 	if ((SetMask & ALLN_SETPROTECT) != 0)
 	{
@@ -5848,7 +5624,6 @@ VOID 	AsicUpdateProtect(
 				break;
 		}
 	}
-#endif // DOT11_N_SUPPORT //
 
 	offset = CCK_PROT_CFG;
 	for (i = 0;i < 6;i++)
@@ -5860,6 +5635,276 @@ VOID 	AsicUpdateProtect(
 	}
 }
 
+#ifdef RT30xx
+/*
+	========================================================================
+
+	Routine Description: Write RT30xx RF register through MAC
+
+	Arguments:
+
+	Return Value:
+
+	IRQL =
+
+	Note:
+
+	========================================================================
+*/
+NTSTATUS RT30xxWriteRFRegister(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	UCHAR			RegID,
+	IN	UCHAR			Value)
+{
+	RF_CSR_CFG_STRUC	rfcsr;
+	UINT				i = 0;
+
+	do
+	{
+		RTMP_IO_READ32(pAd, RF_CSR_CFG, &rfcsr.word);
+
+		if (!rfcsr.field.RF_CSR_KICK)
+			break;
+		i++;
+	}
+	while ((i < RETRY_LIMIT) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)));
+
+	if ((i == RETRY_LIMIT) || (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
+	{
+		DBGPRINT_RAW(RT_DEBUG_ERROR, ("Retry count exhausted or device removed!!!\n"));
+		return STATUS_UNSUCCESSFUL;
+	}
+
+	rfcsr.field.RF_CSR_WR = 1;
+	rfcsr.field.RF_CSR_KICK = 1;
+	rfcsr.field.TESTCSR_RFACC_REGNUM = RegID;
+	rfcsr.field.RF_CSR_DATA = Value;
+
+	RTMP_IO_WRITE32(pAd, RF_CSR_CFG, rfcsr.word);
+
+	return STATUS_SUCCESS;
+}
+
+
+/*
+	========================================================================
+
+	Routine Description: Read RT30xx RF register through MAC
+
+	Arguments:
+
+	Return Value:
+
+	IRQL =
+
+	Note:
+
+	========================================================================
+*/
+NTSTATUS RT30xxReadRFRegister(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	UCHAR			RegID,
+	IN	PUCHAR			pValue)
+{
+	RF_CSR_CFG_STRUC	rfcsr;
+	UINT				i=0, k=0;
+
+	for (i=0; i<MAX_BUSY_COUNT; i++)
+	{
+		RTMP_IO_READ32(pAd, RF_CSR_CFG, &rfcsr.word);
+
+		if (rfcsr.field.RF_CSR_KICK == BUSY)
+		{
+			continue;
+		}
+		rfcsr.word = 0;
+		rfcsr.field.RF_CSR_WR = 0;
+		rfcsr.field.RF_CSR_KICK = 1;
+		rfcsr.field.TESTCSR_RFACC_REGNUM = RegID;
+		RTMP_IO_WRITE32(pAd, RF_CSR_CFG, rfcsr.word);
+		for (k=0; k<MAX_BUSY_COUNT; k++)
+		{
+			RTMP_IO_READ32(pAd, RF_CSR_CFG, &rfcsr.word);
+
+			if (rfcsr.field.RF_CSR_KICK == IDLE)
+				break;
+		}
+		if ((rfcsr.field.RF_CSR_KICK == IDLE) &&
+			(rfcsr.field.TESTCSR_RFACC_REGNUM == RegID))
+		{
+			*pValue = (UCHAR)rfcsr.field.RF_CSR_DATA;
+			break;
+		}
+	}
+	if (rfcsr.field.RF_CSR_KICK == BUSY)
+	{
+		DBGPRINT_ERR(("RF read R%d=0x%x fail, i[%d], k[%d]\n", RegID, rfcsr.word,i,k));
+		return STATUS_UNSUCCESSFUL;
+	}
+
+	return STATUS_SUCCESS;
+}
+#endif // RT30xx //
+
+#ifdef RT30xx
+// add by johnli, RF power sequence setup
+/*
+	==========================================================================
+	Description:
+
+	Load RF normal operation-mode setup
+
+	==========================================================================
+ */
+VOID RT30xxLoadRFNormalModeSetup(
+	IN PRTMP_ADAPTER 	pAd)
+{
+	UCHAR RFValue;
+
+	// RX0_PD & TX0_PD, RF R1 register Bit 2 & Bit 3 to 0 and RF_BLOCK_en,RX1_PD & TX1_PD, Bit0, Bit 4 & Bit5 to 1
+	RT30xxReadRFRegister(pAd, RF_R01, &RFValue);
+	RFValue = (RFValue & (~0x0C)) | 0x31;
+	RT30xxWriteRFRegister(pAd, RF_R01, RFValue);
+
+	// TX_LO2_en, RF R15 register Bit 3 to 0
+	RT30xxReadRFRegister(pAd, RF_R15, &RFValue);
+	RFValue &= (~0x08);
+	RT30xxWriteRFRegister(pAd, RF_R15, RFValue);
+
+	// TX_LO1_en, RF R17 register Bit 3 to 0
+	RT30xxReadRFRegister(pAd, RF_R17, &RFValue);
+	RFValue &= (~0x08);
+	// to fix rx long range issue
+	if (((pAd->MACVersion & 0xffff) >= 0x0211) && (pAd->NicConfig2.field.ExternalLNAForG == 0))
+	{
+		RFValue |= 0x20;
+	}
+	RT30xxWriteRFRegister(pAd, RF_R17, RFValue);
+
+	// RX_LO1_en, RF R20 register Bit 3 to 0
+	RT30xxReadRFRegister(pAd, RF_R20, &RFValue);
+	RFValue &= (~0x08);
+	RT30xxWriteRFRegister(pAd, RF_R20, RFValue);
+
+	// RX_LO2_en, RF R21 register Bit 3 to 0
+	RT30xxReadRFRegister(pAd, RF_R21, &RFValue);
+	RFValue &= (~0x08);
+	RT30xxWriteRFRegister(pAd, RF_R21, RFValue);
+
+	// LDORF_VC, RF R27 register Bit 2 to 0
+	RT30xxReadRFRegister(pAd, RF_R27, &RFValue);
+	if ((pAd->MACVersion & 0xffff) < 0x0211)
+		RFValue = (RFValue & (~0x77)) | 0x3;
+	else
+		RFValue = (RFValue & (~0x77));
+	RT30xxWriteRFRegister(pAd, RF_R27, RFValue);
+	/* end johnli */
+}
+
+/*
+	==========================================================================
+	Description:
+
+	Load RF sleep-mode setup
+
+	==========================================================================
+ */
+VOID RT30xxLoadRFSleepModeSetup(
+	IN PRTMP_ADAPTER 	pAd)
+{
+	UCHAR RFValue;
+	UINT32 MACValue;
+
+	// RF_BLOCK_en. RF R1 register Bit 0 to 0
+	RT30xxReadRFRegister(pAd, RF_R01, &RFValue);
+	RFValue &= (~0x01);
+	RT30xxWriteRFRegister(pAd, RF_R01, RFValue);
+
+	// VCO_IC, RF R7 register Bit 4 & Bit 5 to 0
+	RT30xxReadRFRegister(pAd, RF_R07, &RFValue);
+	RFValue &= (~0x30);
+	RT30xxWriteRFRegister(pAd, RF_R07, RFValue);
+
+	// Idoh, RF R9 register Bit 1, Bit 2 & Bit 3 to 0
+	RT30xxReadRFRegister(pAd, RF_R09, &RFValue);
+	RFValue &= (~0x0E);
+	RT30xxWriteRFRegister(pAd, RF_R09, RFValue);
+
+	// RX_CTB_en, RF R21 register Bit 7 to 0
+	RT30xxReadRFRegister(pAd, RF_R21, &RFValue);
+	RFValue &= (~0x80);
+	RT30xxWriteRFRegister(pAd, RF_R21, RFValue);
+
+	// LDORF_VC, RF R27 register Bit 0, Bit 1 & Bit 2 to 1
+	RT30xxReadRFRegister(pAd, RF_R27, &RFValue);
+	RFValue |= 0x77;
+	RT30xxWriteRFRegister(pAd, RF_R27, RFValue);
+
+	RTMP_IO_READ32(pAd, LDO_CFG0, &MACValue);
+	MACValue |= 0x1D000000;
+	RTMP_IO_WRITE32(pAd, LDO_CFG0, MACValue);
+}
+
+/*
+	==========================================================================
+	Description:
+
+	Reverse RF sleep-mode setup
+
+	==========================================================================
+ */
+VOID RT30xxReverseRFSleepModeSetup(
+	IN PRTMP_ADAPTER 	pAd)
+{
+	UCHAR RFValue;
+	UINT32 MACValue;
+
+	// RF_BLOCK_en, RF R1 register Bit 0 to 1
+	RT30xxReadRFRegister(pAd, RF_R01, &RFValue);
+	RFValue |= 0x01;
+	RT30xxWriteRFRegister(pAd, RF_R01, RFValue);
+
+	// VCO_IC, RF R7 register Bit 4 & Bit 5 to 1
+	RT30xxReadRFRegister(pAd, RF_R07, &RFValue);
+	RFValue |= 0x30;
+	RT30xxWriteRFRegister(pAd, RF_R07, RFValue);
+
+	// Idoh, RF R9 register Bit 1, Bit 2 & Bit 3 to 1
+	RT30xxReadRFRegister(pAd, RF_R09, &RFValue);
+	RFValue |= 0x0E;
+	RT30xxWriteRFRegister(pAd, RF_R09, RFValue);
+
+	// RX_CTB_en, RF R21 register Bit 7 to 1
+	RT30xxReadRFRegister(pAd, RF_R21, &RFValue);
+	RFValue |= 0x80;
+	RT30xxWriteRFRegister(pAd, RF_R21, RFValue);
+
+	// LDORF_VC, RF R27 register Bit 2 to 0
+	RT30xxReadRFRegister(pAd, RF_R27, &RFValue);
+	if ((pAd->MACVersion & 0xffff) < 0x0211)
+		RFValue = (RFValue & (~0x77)) | 0x3;
+	else
+		RFValue = (RFValue & (~0x77));
+	RT30xxWriteRFRegister(pAd, RF_R27, RFValue);
+
+	// RT3071 version E has fixed this issue
+	if ((pAd->NicConfig2.field.DACTestBit == 1) && ((pAd->MACVersion & 0xffff) < 0x0211))
+	{
+		// patch tx EVM issue temporarily
+		RTMP_IO_READ32(pAd, LDO_CFG0, &MACValue);
+		MACValue = ((MACValue & 0xE0FFFFFF) | 0x0D000000);
+		RTMP_IO_WRITE32(pAd, LDO_CFG0, MACValue);
+	}
+	else
+	{
+		RTMP_IO_READ32(pAd, LDO_CFG0, &MACValue);
+		MACValue = ((MACValue & 0xE0FFFFFF) | 0x01000000);
+		RTMP_IO_WRITE32(pAd, LDO_CFG0, MACValue);
+	}
+}
+// end johnli
+#endif // RT30xx //
+
 /*
 	==========================================================================
 	Description:
@@ -5881,6 +5926,21 @@ VOID AsicSwitchChannel(
 	RTMP_RF_REGS *RFRegTable;
 
 	// Search Tx power value
+#ifdef RT30xx
+	// We can't use ChannelList to search channel, since some central channl's txpowr doesn't list
+	// in ChannelList, so use TxPower array instead.
+	//
+	for (index = 0; index < MAX_NUM_OF_CHANNELS; index++)
+	{
+		if (Channel == pAd->TxPower[index].Channel)
+	{
+			TxPwer = pAd->TxPower[index].Power;
+			TxPwer2 = pAd->TxPower[index].Power2;
+			break;
+		}
+	}
+#endif
+#ifndef RT30xx
 	for (index = 0; index < pAd->ChannelListNum; index++)
 	{
 		if (Channel == pAd->ChannelList[index].Channel)
@@ -5890,12 +5950,152 @@ VOID AsicSwitchChannel(
 			break;
 		}
 	}
+#endif
 
 	if (index == MAX_NUM_OF_CHANNELS)
 	{
+#ifndef RT30xx
 		DBGPRINT(RT_DEBUG_ERROR, ("AsicSwitchChannel: Cant find the Channel#%d \n", Channel));
+#endif
+#ifdef RT30xx
+		DBGPRINT(RT_DEBUG_ERROR, ("AsicSwitchChannel: Can't find the Channel#%d \n", Channel));
+#endif
 	}
 
+#ifdef RT2870
+	// The RF programming sequence is difference between 3xxx and 2xxx
+#ifdef RT30xx
+	if ((IS_RT3070(pAd) || IS_RT3090(pAd)) && ((pAd->RfIcType == RFIC_3020) || (pAd->RfIcType == RFIC_2020) ||
+		(pAd->RfIcType == RFIC_3021) || (pAd->RfIcType == RFIC_3022)))
+#endif
+#ifndef RT30xx
+	if (IS_RT3070(pAd) && ((pAd->RfIcType == RFIC_3020) || (pAd->RfIcType == RFIC_2020)))
+#endif
+	{
+		/* modify by WY for Read RF Reg. error */
+		UCHAR RFValue;
+
+		for (index = 0; index < NUM_OF_3020_CHNL; index++)
+		{
+			if (Channel == FreqItems3020[index].Channel)
+			{
+				// Programming channel parameters
+				RT30xxWriteRFRegister(pAd, RF_R02, FreqItems3020[index].N);
+				RT30xxWriteRFRegister(pAd, RF_R03, FreqItems3020[index].K);
+
+#ifndef RT30xx
+				RT30xxReadRFRegister(pAd, RF_R06, (PUCHAR)&RFValue);
+				RFValue = (RFValue & 0xFC) | FreqItems3020[index].R;
+				RT30xxWriteRFRegister(pAd, RF_R06, (UCHAR)RFValue);
+
+				// Set Tx Power
+				RT30xxReadRFRegister(pAd, RF_R12, (PUCHAR)&RFValue);
+				RFValue = (RFValue & 0xE0) | TxPwer;
+				RT30xxWriteRFRegister(pAd, RF_R12, (UCHAR)RFValue);
+
+				// Set RF offset
+				RT30xxReadRFRegister(pAd, RF_R23, (PUCHAR)&RFValue);
+				RFValue = (RFValue & 0x80) | pAd->RfFreqOffset;
+				RT30xxWriteRFRegister(pAd, RF_R23, (UCHAR)RFValue);
+#endif
+#ifdef RT30xx
+				RT30xxReadRFRegister(pAd, RF_R06, &RFValue);
+				RFValue = (RFValue & 0xFC) | FreqItems3020[index].R;
+				RT30xxWriteRFRegister(pAd, RF_R06, RFValue);
+
+				// Set Tx0 Power
+				RT30xxReadRFRegister(pAd, RF_R12, &RFValue);
+				RFValue = (RFValue & 0xE0) | TxPwer;
+				RT30xxWriteRFRegister(pAd, RF_R12, RFValue);
+
+				// Set Tx1 Power
+				RT30xxReadRFRegister(pAd, RF_R13, &RFValue);
+				RFValue = (RFValue & 0xE0) | TxPwer2;
+				RT30xxWriteRFRegister(pAd, RF_R13, RFValue);
+
+				// Tx/Rx Stream setting
+				RT30xxReadRFRegister(pAd, RF_R01, &RFValue);
+				//if (IS_RT3090(pAd))
+				//	RFValue |= 0x01; // Enable RF block.
+				RFValue &= 0x03;	//clear bit[7~2]
+				if (pAd->Antenna.field.TxPath == 1)
+					RFValue |= 0xA0;
+				else if (pAd->Antenna.field.TxPath == 2)
+					RFValue |= 0x80;
+				if (pAd->Antenna.field.RxPath == 1)
+					RFValue |= 0x50;
+				else if (pAd->Antenna.field.RxPath == 2)
+					RFValue |= 0x40;
+				RT30xxWriteRFRegister(pAd, RF_R01, RFValue);
+
+				// Set RF offset
+				RT30xxReadRFRegister(pAd, RF_R23, &RFValue);
+				RFValue = (RFValue & 0x80) | pAd->RfFreqOffset;
+				RT30xxWriteRFRegister(pAd, RF_R23, RFValue);
+#endif
+
+				// Set BW
+				if (!bScan && (pAd->CommonCfg.BBPCurrentBW == BW_40))
+				{
+					RFValue = pAd->Mlme.CaliBW40RfR24;
+					//DISABLE_11N_CHECK(pAd);
+				}
+				else
+				{
+					RFValue = pAd->Mlme.CaliBW20RfR24;
+				}
+#ifndef RT30xx
+				RT30xxWriteRFRegister(pAd, RF_R24, (UCHAR)RFValue);
+
+				// Enable RF tuning
+				RT30xxReadRFRegister(pAd, RF_R07, (PUCHAR)&RFValue);
+				RFValue = RFValue | 0x1;
+				RT30xxWriteRFRegister(pAd, RF_R07, (UCHAR)RFValue);
+
+				// latch channel for future usage.
+				pAd->LatchRfRegs.Channel = Channel;
+#endif
+#ifdef RT30xx
+				RT30xxWriteRFRegister(pAd, RF_R24, RFValue);
+				RT30xxWriteRFRegister(pAd, RF_R31, RFValue);
+
+				// Enable RF tuning
+				RT30xxReadRFRegister(pAd, RF_R07, &RFValue);
+				RFValue = RFValue | 0x1;
+				RT30xxWriteRFRegister(pAd, RF_R07, RFValue);
+
+				// latch channel for future usage.
+				pAd->LatchRfRegs.Channel = Channel;
+
+				DBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, Pwr0=%d, Pwr1=%d, %dT), N=0x%02X, K=0x%02X, R=0x%02X\n",
+					Channel,
+					pAd->RfIcType,
+					TxPwer,
+					TxPwer2,
+					pAd->Antenna.field.TxPath,
+					FreqItems3020[index].N,
+					FreqItems3020[index].K,
+					FreqItems3020[index].R));
+#endif
+
+				break;
+			}
+		}
+
+#ifndef RT30xx
+		DBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, Pwr0=%d, Pwr1=%d, %dT), N=0x%02X, K=0x%02X, R=0x%02X\n",
+			Channel,
+			pAd->RfIcType,
+			TxPwer,
+			TxPwer2,
+			pAd->Antenna.field.TxPath,
+			FreqItems3020[index].N,
+			FreqItems3020[index].K,
+			FreqItems3020[index].R));
+#endif
+	}
+	else
+#endif // RT2870 //
 	{
 		RFRegTable = RF2850RegTable;
 
@@ -6149,6 +6349,53 @@ VOID	AsicAntennaSelect(
 	IN	PRTMP_ADAPTER	pAd,
 	IN	UCHAR			Channel)
 {
+#ifdef RT30xx
+			if (pAd->Mlme.OneSecPeriodicRound % 2 == 1)
+			{
+				// patch for AsicSetRxAnt failed
+				pAd->RxAnt.EvaluatePeriod = 0;
+
+				// check every 2 second. If rcv-beacon less than 5 in the past 2 second, then AvgRSSI is no longer a
+				// valid indication of the distance between this AP and its clients.
+				if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
+				{
+					SHORT	realavgrssi1;
+
+					// if no traffic then reset average rssi to trigger evaluation
+					if (pAd->StaCfg.NumOfAvgRssiSample < 5)
+					{
+						pAd->RxAnt.Pair1LastAvgRssi = (-99);
+						pAd->RxAnt.Pair2LastAvgRssi = (-99);
+						DBGPRINT(RT_DEBUG_TRACE, ("MlmePeriodicExec: no traffic/beacon, reset RSSI\n"));
+					}
+
+					pAd->StaCfg.NumOfAvgRssiSample = 0;
+					realavgrssi1 = (pAd->RxAnt.Pair1AvgRssi[pAd->RxAnt.Pair1PrimaryRxAnt] >> 3);
+
+					DBGPRINT(RT_DEBUG_TRACE,("Ant-realrssi0(%d), Lastrssi0(%d), EvaluateStableCnt=%d\n", realavgrssi1, pAd->RxAnt.Pair1LastAvgRssi, pAd->RxAnt.EvaluateStableCnt));
+
+					// if the difference between two rssi is larger or less than 5, then evaluate the other antenna
+					if ((pAd->RxAnt.EvaluateStableCnt < 2) || (realavgrssi1 > (pAd->RxAnt.Pair1LastAvgRssi + 5)) || (realavgrssi1 < (pAd->RxAnt.Pair1LastAvgRssi - 5)))
+					{
+						pAd->RxAnt.Pair1LastAvgRssi = realavgrssi1;
+						AsicEvaluateRxAnt(pAd);
+					}
+				}
+				else
+				{
+					// if not connected, always switch antenna to try to connect
+					UCHAR	temp;
+
+					temp = pAd->RxAnt.Pair1PrimaryRxAnt;
+					pAd->RxAnt.Pair1PrimaryRxAnt = pAd->RxAnt.Pair1SecondaryRxAnt;
+					pAd->RxAnt.Pair1SecondaryRxAnt = temp;
+
+					DBGPRINT(RT_DEBUG_TRACE, ("MlmePeriodicExec: no connect, switch to another one to try connection\n"));
+
+					AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt);
+				}
+			}
+#endif /* RT30xx */
 }
 
 /*
@@ -6218,11 +6465,13 @@ VOID AsicAdjustTxPower(
 	ULONG		TxPwr[5];
 	CHAR		Value;
 
+#ifdef RT2860
 	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)
 		|| (pAd->bPCIclkOff == TRUE)
 		|| RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF)
 		|| RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
 		return;
+#endif
 
 	if (pAd->CommonCfg.BBPCurrentBW == BW_40)
 	{
@@ -6364,95 +6613,6 @@ VOID AsicAdjustTxPower(
 	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BbpR1);
 	BbpR1 &= 0xFC;
 
-#ifdef SINGLE_SKU
-	// Handle regulatory max tx power constrain
-	do
-	{
-		UCHAR    TxPwrInEEPROM = 0xFF, CountryTxPwr = 0xFF, criterion;
-		UCHAR    AdjustMaxTxPwr[40];
-
-		if (pAd->CommonCfg.Channel > 14) // 5G band
-			TxPwrInEEPROM = ((pAd->CommonCfg.DefineMaxTxPwr & 0xFF00) >> 8);
-		else // 2.4G band
-			TxPwrInEEPROM = (pAd->CommonCfg.DefineMaxTxPwr & 0x00FF);
-		CountryTxPwr = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
-
-		// error handling, range check
-		if ((TxPwrInEEPROM > 0x50) || (CountryTxPwr > 0x50))
-		{
-			DBGPRINT(RT_DEBUG_ERROR,("AsicAdjustTxPower - Invalid max tx power (=0x%02x), CountryTxPwr=%d\n", TxPwrInEEPROM, CountryTxPwr));
-			break;
-		}
-
-		criterion = *((PUCHAR)TxPwr + 2) & 0xF;        // FAE use OFDM 6M as criterion
-
-		DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (criterion=%d, TxPwrInEEPROM=%d, CountryTxPwr=%d)\n", criterion, TxPwrInEEPROM, CountryTxPwr));
-
-		// Adjust max tx power according to the relationship of tx power in E2PROM
-		for (i=0; i<5; i++)
-		{
-			// CCK will have 4dBm larger than OFDM
-			// Therefore, we should separate to parse the tx power field
-			if (i == 0)
-			{
-				for (j=0; j<8; j++)
-				{
-					Value = (CHAR)((TxPwr[i] >> j*4) & 0x0F);
-
-					if (j < 4)
-					{
-						// CCK will have 4dBm larger than OFDM
-						AdjustMaxTxPwr[i*8+j] = TxPwrInEEPROM + (Value - criterion) + 4;
-					}
-					else
-					{
-						AdjustMaxTxPwr[i*8+j] = TxPwrInEEPROM + (Value - criterion);
-					}
-					DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (i/j=%d/%d, Value=%d, %d)\n", i, j, Value, AdjustMaxTxPwr[i*8+j]));
-				}
-			}
-			else
-			{
-				for (j=0; j<8; j++)
-				{
-					Value = (CHAR)((TxPwr[i] >> j*4) & 0x0F);
-
-					AdjustMaxTxPwr[i*8+j] = TxPwrInEEPROM + (Value - criterion);
-					DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (i/j=%d/%d, Value=%d, %d)\n", i, j, Value, AdjustMaxTxPwr[i*8+j]));
-				}
-			}
-		}
-
-		// Adjust tx power according to the relationship
-		for (i=0; i<5; i++)
-		{
-			if (TxPwr[i] != 0xffffffff)
-			{
-				for (j=0; j<8; j++)
-				{
-					Value = (CHAR)((TxPwr[i] >> j*4) & 0x0F);
-
-					// The system tx power is larger than the regulatory, the power should be restrain
-					if (AdjustMaxTxPwr[i*8+j] > CountryTxPwr)
-					{
-						// decrease to zero and don't need to take care BBPR1
-						if ((Value - (AdjustMaxTxPwr[i*8+j] - CountryTxPwr)) > 0)
-							Value -= (AdjustMaxTxPwr[i*8+j] - CountryTxPwr);
-						else
-							Value = 0;
-
-						DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (i/j=%d/%d, Value=%d, %d)\n", i, j, Value, AdjustMaxTxPwr[i*8+j]));
-					}
-					else
-						DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (i/j=%d/%d, Value=%d, %d, no change)\n", i, j, Value, AdjustMaxTxPwr[i*8+j]));
-
-						TxPwr[i] = (TxPwr[i] & ~(0x0000000F << j*4)) | (Value << j*4);
-				}
-			}
-		}
-	} while (FALSE);
-#endif // SINGLE_SKU //
-
 	/* calculate delta power based on the percentage specified from UI */
 	// E2PROM setting is calibrated for maximum TX power (i.e. 100%)
 	// We lower TX power here according to the percentage specified from UI
@@ -6522,7 +6682,6 @@ VOID AsicAdjustTxPower(
 
 }
 
-#ifdef CONFIG_STA_SUPPORT
 /*
 	==========================================================================
 	Description:
@@ -6568,12 +6727,22 @@ VOID AsicForceSleep(
  */
 VOID AsicForceWakeup(
 	IN PRTMP_ADAPTER pAd,
+#ifdef RT2860
 	IN UCHAR    	 Level)
+#endif
+#ifdef RT2870
+	IN BOOLEAN    bFromTx)
+#endif
 {
     DBGPRINT(RT_DEBUG_TRACE, ("--> AsicForceWakeup \n"));
+#ifdef RT2860
     RT28XX_STA_FORCE_WAKEUP(pAd, Level);
+#endif
+#ifdef RT2870
+    RT28XX_STA_FORCE_WAKEUP(pAd, bFromTx);
+#endif
 }
-#endif // CONFIG_STA_SUPPORT //
+
 /*
 	==========================================================================
 	Description:
@@ -6688,9 +6857,7 @@ VOID AsicDisableRDG(
 
 	Data  &= 0xFFFFFF00;
 	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_DYNAMIC_BE_TXOP_ACTIVE)
-#ifdef DOT11_N_SUPPORT
 		&& (pAd->MacTab.fAnyStationMIMOPSDynamic == FALSE)
-#endif // DOT11_N_SUPPORT //
 	)
 	{
 		// For CWC test, change txop from 0x30 to 0x20 in TxBurst mode
@@ -6745,8 +6912,7 @@ VOID AsicEnableBssSync(
 	DBGPRINT(RT_DEBUG_TRACE, ("--->AsicEnableBssSync(INFRA mode)\n"));
 
 	RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr.word);
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+
 	{
 		csr.field.BeaconInterval = pAd->CommonCfg.BeaconPeriod << 4; // ASIC register in units of 1/16 TU
 		csr.field.bTsfTicking = 1;
@@ -6754,7 +6920,7 @@ VOID AsicEnableBssSync(
 		csr.field.bBeaconGen  = 0; // do NOT generate BEACON
 		csr.field.bTBTTEnable = 1;
 	}
-#endif // CONFIG_STA_SUPPORT //
+
 	RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr.word);
 }
 
@@ -6785,6 +6951,7 @@ VOID AsicEnableIbssSync(
 	csr9.field.bTsfTicking = 0;
 	RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr9.word);
 
+#ifdef RT2860
 	// move BEACON TXD and frame content to on-chip memory
 	ptr = (PUCHAR)&pAd->BeaconTxWI;
 	for (i=0; i<TXWI_SIZE; i+=4)  // 16-byte TXWI field
@@ -6802,6 +6969,24 @@ VOID AsicEnableIbssSync(
 		RTMP_IO_WRITE32(pAd, HW_BEACON_BASE0 + TXWI_SIZE + i, longptr);
 		ptr +=4;
 	}
+#endif
+#ifdef RT2870
+	// move BEACON TXD and frame content to on-chip memory
+	ptr = (PUCHAR)&pAd->BeaconTxWI;
+	for (i=0; i<TXWI_SIZE; i+=2)  // 16-byte TXWI field
+	{
+		RTUSBMultiWrite(pAd, HW_BEACON_BASE0 + i, ptr, 2);
+		ptr += 2;
+	}
+
+	// start right after the 16-byte TXWI field
+	ptr = pAd->BeaconBuf;
+	for (i=0; i< pAd->BeaconTxWI.MPDUtotalByteCount; i+=2)
+	{
+		RTUSBMultiWrite(pAd, HW_BEACON_BASE0 + TXWI_SIZE + i, ptr, 2);
+		ptr +=2;
+	}
+#endif // RT2870 //
 
 	// start sending BEACON
 	csr9.field.BeaconInterval = pAd->CommonCfg.BeaconPeriod << 4; // ASIC register in units of 1/16 TU
@@ -6949,8 +7134,7 @@ VOID AsicSetEdcaParm(
 		Ac2Cfg.field.Cwmin = pEdcaParm->Cwmin[QID_AC_VI];
 		Ac2Cfg.field.Cwmax = pEdcaParm->Cwmax[QID_AC_VI];
 		Ac2Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_VI];
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+
 		{
 			// Tuning for Wi-Fi WMM S06
 			if (pAd->CommonCfg.bWiFiTest &&
@@ -6958,15 +7142,22 @@ VOID AsicSetEdcaParm(
 				Ac2Cfg.field.Aifsn -= 1;
 
 			// Tuning for TGn Wi-Fi 5.2.32
-			// STA TestBed changes in this item: conexant legacy sta ==> broadcom 11n sta
+			// STA TestBed changes in this item: connexant legacy sta ==> broadcom 11n sta
 			if (STA_TGN_WIFI_ON(pAd) &&
 				pEdcaParm->Aifsn[QID_AC_VI] == 10)
 			{
 				Ac0Cfg.field.Aifsn = 3;
 				Ac2Cfg.field.AcTxop = 5;
 			}
+
+#ifdef RT30xx
+			if (pAd->RfIcType == RFIC_3020 || pAd->RfIcType == RFIC_2020)
+			{
+				// Tuning for WiFi WMM S3-T07: connexant legacy sta ==> broadcom 11n sta.
+				Ac2Cfg.field.Aifsn = 5;
+			}
+#endif // RT30xx //
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 		Ac3Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_VO];
 		Ac3Cfg.field.Cwmin = pEdcaParm->Cwmin[QID_AC_VO];
@@ -7008,10 +7199,9 @@ VOID AsicSetEdcaParm(
 		CwminCsr.field.Cwmin0 = pEdcaParm->Cwmin[QID_AC_BE];
 		CwminCsr.field.Cwmin1 = pEdcaParm->Cwmin[QID_AC_BK];
 		CwminCsr.field.Cwmin2 = pEdcaParm->Cwmin[QID_AC_VI];
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			CwminCsr.field.Cwmin3 = pEdcaParm->Cwmin[QID_AC_VO] - 1; //for TGn wifi test
-#endif // CONFIG_STA_SUPPORT //
+
+		CwminCsr.field.Cwmin3 = pEdcaParm->Cwmin[QID_AC_VO] - 1; //for TGn wifi test
+
 		RTMP_IO_WRITE32(pAd, WMM_CWMIN_CFG, CwminCsr.word);
 
 		CwmaxCsr.word = 0;
@@ -7025,8 +7215,7 @@ VOID AsicSetEdcaParm(
 		AifsnCsr.field.Aifsn0 = Ac0Cfg.field.Aifsn; //pEdcaParm->Aifsn[QID_AC_BE];
 		AifsnCsr.field.Aifsn1 = Ac1Cfg.field.Aifsn; //pEdcaParm->Aifsn[QID_AC_BK];
 		AifsnCsr.field.Aifsn2 = Ac2Cfg.field.Aifsn; //pEdcaParm->Aifsn[QID_AC_VI];
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+
 		{
 			// Tuning for Wi-Fi WMM S06
 			if (pAd->CommonCfg.bWiFiTest &&
@@ -7034,20 +7223,25 @@ VOID AsicSetEdcaParm(
 				AifsnCsr.field.Aifsn2 = Ac2Cfg.field.Aifsn - 4;
 
 			// Tuning for TGn Wi-Fi 5.2.32
-			// STA TestBed changes in this item: conexant legacy sta ==> broadcom 11n sta
+			// STA TestBed changes in this item: connexant legacy sta ==> broadcom 11n sta
 			if (STA_TGN_WIFI_ON(pAd) &&
 				pEdcaParm->Aifsn[QID_AC_VI] == 10)
 			{
 				AifsnCsr.field.Aifsn0 = 3;
 				AifsnCsr.field.Aifsn2 = 7;
 			}
+#ifdef RT2870
+			if (INFRA_ON(pAd))
+				CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[BSSID_WCID], fCLIENT_STATUS_WMM_CAPABLE);
+#endif
 		}
-#endif // CONFIG_STA_SUPPORT //
 
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			AifsnCsr.field.Aifsn3 = Ac3Cfg.field.Aifsn - 1; //pEdcaParm->Aifsn[QID_AC_VO]; //for TGn wifi test
-#endif // CONFIG_STA_SUPPORT //
+		AifsnCsr.field.Aifsn3 = Ac3Cfg.field.Aifsn - 1; //pEdcaParm->Aifsn[QID_AC_VO]; //for TGn wifi test
+#ifdef RT30xx
+		if (pAd->RfIcType == RFIC_3020 || pAd->RfIcType == RFIC_2020)
+			AifsnCsr.field.Aifsn2 = 0x2; //pEdcaParm->Aifsn[QID_AC_VI]; //for WiFi WMM S4-T04.
+#endif // RT30xx //
+
 		RTMP_IO_WRITE32(pAd, WMM_AIFSN_CFG, AifsnCsr.word);
 
 		NdisMoveMemory(&pAd->CommonCfg.APEdcaParm, pEdcaParm, sizeof(EDCA_PARM));
@@ -7098,10 +7292,8 @@ VOID 	AsicSetSlotTime(
 	ULONG	SlotTime;
 	UINT32	RegValue = 0;
 
-#ifdef CONFIG_STA_SUPPORT
 	if (pAd->CommonCfg.Channel > 14)
 		bUseShortSlotTime = TRUE;
-#endif // CONFIG_STA_SUPPORT //
 
 	if (bUseShortSlotTime)
 		OPSTATUS_SET_FLAG(pAd, fOP_STATUS_SHORT_SLOT_INUSED);
@@ -7110,36 +7302,31 @@ VOID 	AsicSetSlotTime(
 
 	SlotTime = (bUseShortSlotTime)? 9 : 20;
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
+#ifndef RT30xx
 		// force using short SLOT time for FAE to demo performance when TxBurst is ON
 		if (((pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED)))
-#ifdef DOT11_N_SUPPORT
 			|| ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE) && (pAd->CommonCfg.BACapability.field.Policy == BA_NOTUSE))
-#endif // DOT11_N_SUPPORT //
 			)
 		{
 			// In this case, we will think it is doing Wi-Fi test
 			// And we will not set to short slot when bEnableTxBurst is TRUE.
 		}
 		else if (pAd->CommonCfg.bEnableTxBurst)
+#endif
+#ifdef RT30xx
+		if (pAd->CommonCfg.bEnableTxBurst)
+#endif
 			SlotTime = 9;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	//
 	// For some reasons, always set it to short slot time.
 	//
 	// ToDo: Should consider capability with 11B
 	//
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if (pAd->StaCfg.BssType == BSS_ADHOC)
-			SlotTime = 20;
-	}
-#endif // CONFIG_STA_SUPPORT //
+	if (pAd->StaCfg.BssType == BSS_ADHOC)
+		SlotTime = 20;
 
 	RTMP_IO_READ32(pAd, BKOFF_SLOT_CFG, &RegValue);
 	RegValue = RegValue & 0xFFFFFF00;
@@ -7170,7 +7357,9 @@ VOID AsicAddSharedKeyEntry(
 {
 	ULONG offset; //, csr0;
 	SHAREDKEY_MODE_STRUC csr1;
+#ifdef RT2860
 	INT   i;
+#endif
 
 	DBGPRINT(RT_DEBUG_TRACE, ("AsicAddSharedKeyEntry BssIndex=%d, KeyIdx=%d\n", BssIndex,KeyIdx));
 //============================================================================================
@@ -7192,28 +7381,43 @@ VOID AsicAddSharedKeyEntry(
 	//
 	// fill key material - key + TX MIC + RX MIC
 	//
+
 	offset = SHARED_KEY_TABLE_BASE + (4*BssIndex + KeyIdx)*HW_KEY_ENTRY_SIZE;
+#ifdef RT2860
 	for (i=0; i<MAX_LEN_OF_SHARE_KEY; i++)
 	{
 		RTMP_IO_WRITE8(pAd, offset + i, pKey[i]);
 	}
-
+#endif
+#ifdef RT2870
+	RTUSBMultiWrite(pAd, offset, pKey, MAX_LEN_OF_SHARE_KEY);
+#endif
 	offset += MAX_LEN_OF_SHARE_KEY;
 	if (pTxMic)
 	{
+#ifdef RT2860
 		for (i=0; i<8; i++)
 		{
 			RTMP_IO_WRITE8(pAd, offset + i, pTxMic[i]);
 		}
+#endif
+#ifdef RT2870
+		RTUSBMultiWrite(pAd, offset, pTxMic, 8);
+#endif
 	}
 
 	offset += 8;
 	if (pRxMic)
 	{
+#ifdef RT2860
 		for (i=0; i<8; i++)
 		{
 			RTMP_IO_WRITE8(pAd, offset + i, pRxMic[i]);
 		}
+#endif
+#ifdef RT2870
+		RTUSBMultiWrite(pAd, offset, pRxMic, 8);
+#endif
 	}
 
 
@@ -7389,7 +7593,9 @@ VOID AsicAddKeyEntry(
 	PUCHAR		pTxtsc = pCipherKey->TxTsc;
 	UCHAR		CipherAlg = pCipherKey->CipherAlg;
 	SHAREDKEY_MODE_STRUC csr1;
+#ifdef RT2860
 	UCHAR		i;
+#endif
 
 	DBGPRINT(RT_DEBUG_TRACE, ("==> AsicAddKeyEntry\n"));
 	//
@@ -7404,10 +7610,15 @@ VOID AsicAddKeyEntry(
 	// 2.) Set Key to Asic
 	//
 	//for (i = 0; i < KeyLen; i++)
+#ifdef RT2860
 	for (i = 0; i < MAX_LEN_OF_PEER_KEY; i++)
 	{
 		RTMP_IO_WRITE8(pAd, offset + i, pKey[i]);
 	}
+#endif
+#ifdef RT2870
+	RTUSBMultiWrite(pAd, offset, pKey, MAX_LEN_OF_PEER_KEY);
+#endif
 	offset += MAX_LEN_OF_PEER_KEY;
 
 	//
@@ -7415,19 +7626,29 @@ VOID AsicAddKeyEntry(
 	//
 	if (pTxMic)
 	{
+#ifdef RT2860
 		for (i = 0; i < 8; i++)
 		{
 			RTMP_IO_WRITE8(pAd, offset + i, pTxMic[i]);
 		}
+#endif
+#ifdef RT2870
+		RTUSBMultiWrite(pAd, offset, pTxMic, 8);
+#endif
 	}
 	offset += LEN_TKIP_TXMICK;
 
 	if (pRxMic)
 	{
+#ifdef RT2860
 		for (i = 0; i < 8; i++)
 		{
 			RTMP_IO_WRITE8(pAd, offset + i, pRxMic[i]);
 		}
+#endif
+#ifdef RT2870
+		RTUSBMultiWrite(pAd, offset, pRxMic, 8);
+#endif
 	}
 
 
@@ -7437,6 +7658,7 @@ VOID AsicAddKeyEntry(
 	//
 	if (bTxKey)
 	{
+#ifdef RT2860
 		offset = MAC_IVEIV_TABLE_BASE + (WCID * HW_IVEIV_ENTRY_SIZE);
 		//
 		// Write IV
@@ -7460,6 +7682,26 @@ VOID AsicAddKeyEntry(
 			RTMP_IO_WRITE8(pAd, offset + i, pTxtsc[i + 2]);
 		}
 
+#endif
+#ifdef RT2870
+		UINT32 tmpVal;
+
+		//
+		// Write IV
+		//
+		IV4 = (KeyIdx << 6);
+		if ((CipherAlg == CIPHER_TKIP) || (CipherAlg == CIPHER_TKIP_NO_MIC) ||(CipherAlg == CIPHER_AES))
+			IV4 |= 0x20;  // turn on extension bit means EIV existence
+
+		tmpVal = pTxtsc[1] + (((pTxtsc[1] | 0x20) & 0x7f) << 8) + (pTxtsc[0] << 16) + (IV4 << 24);
+		RTMP_IO_WRITE32(pAd, offset, tmpVal);
+
+		//
+		// Write EIV
+		//
+		offset += 4;
+		RTMP_IO_WRITE32(pAd, offset, *(PUINT32)&pCipherKey->TxTsc[2]);
+#endif // RT2870 //
 		AsicUpdateWCIDAttribute(pAd, WCID, BssIndex, CipherAlg, bUsePairewiseKeyTable);
 	}
 
@@ -7524,10 +7766,15 @@ VOID AsicAddPairwiseKeyEntry(
 
 	// EKEY
 	offset = PAIRWISE_KEY_TABLE_BASE + (WCID * HW_KEY_ENTRY_SIZE);
+#ifdef RT2860
 	for (i=0; i<MAX_LEN_OF_PEER_KEY; i++)
 	{
 		RTMP_IO_WRITE8(pAd, offset + i, pKey[i]);
 	}
+#endif
+#ifdef RT2870
+	RTUSBMultiWrite(pAd, offset, &pCipherKey->Key[0], MAX_LEN_OF_PEER_KEY);
+#endif // RT2870 //
 	for (i=0; i<MAX_LEN_OF_PEER_KEY; i+=4)
 	{
 		UINT32 Value;
@@ -7539,18 +7786,28 @@ VOID AsicAddPairwiseKeyEntry(
 	//  MIC KEY
 	if (pTxMic)
 	{
+#ifdef RT2860
 		for (i=0; i<8; i++)
 		{
 			RTMP_IO_WRITE8(pAd, offset+i, pTxMic[i]);
 		}
+#endif
+#ifdef RT2870
+		RTUSBMultiWrite(pAd, offset, &pCipherKey->TxMic[0], 8);
+#endif // RT2870 //
 	}
 	offset += 8;
 	if (pRxMic)
 	{
+#ifdef RT2860
 		for (i=0; i<8; i++)
 		{
 			RTMP_IO_WRITE8(pAd, offset+i, pRxMic[i]);
 		}
+#endif
+#ifdef RT2870
+		RTUSBMultiWrite(pAd, offset, &pCipherKey->RxMic[0], 8);
+#endif // RT2870 //
 	}
 
 	DBGPRINT(RT_DEBUG_TRACE,("AsicAddPairwiseKeyEntry: WCID #%d Alg=%s\n",WCID, CipherName[CipherAlg]));
@@ -7599,9 +7856,7 @@ BOOLEAN AsicSendCommandToMcu(
 	HOST_CMD_CSR_STRUC	H2MCmd;
 	H2M_MAILBOX_STRUC	H2MMailbox;
 	ULONG				i = 0;
-#ifdef RALINK_ATE
-	static UINT32 j = 0;
-#endif // RALINK_ATE //
+
 	do
 	{
 		RTMP_IO_READ32(pAd, H2M_MAILBOX_CSR, &H2MMailbox.word);
@@ -7611,33 +7866,10 @@ BOOLEAN AsicSendCommandToMcu(
 		RTMPusecDelay(2);
 	} while(i++ < 100);
 
-	if (i >= 100)
+	if (i > 100)
 	{
-#ifdef RALINK_ATE
-		if (pAd->ate.bFWLoading == TRUE)
-		{
-			/* reloading firmware when received iwpriv cmd "ATE=ATESTOP" */
-			if (j > 0)
-			{
-				if (j % 64 != 0)
-				{
-					DBGPRINT(RT_DEBUG_ERROR, ("#"));
-				}
-				else
-				{
-					DBGPRINT(RT_DEBUG_ERROR, ("\n"));
-				}
-				++j;
-			}
-			else if (j == 0)
-			{
-				DBGPRINT(RT_DEBUG_ERROR, ("Loading firmware. Please wait for a moment...\n"));
-				++j;
-			}
-		}
-		else
-#endif // RALINK_ATE //
 		{
+#ifdef RT2860
 			UINT32 Data;
 
 			// Reset DMA
@@ -7659,21 +7891,15 @@ BOOLEAN AsicSendCommandToMcu(
 			RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &Data);
 			Data &= 0xfffffffd;
 			RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data);
+#endif /* RT2860 */
 		DBGPRINT_ERR(("H2M_MAILBOX still hold by MCU. command fail\n"));
 		}
 		//return FALSE;
+#ifdef RT2870
+		return FALSE;
+#endif
 	}
 
-#ifdef RALINK_ATE
-	else if (pAd->ate.bFWLoading == TRUE)
-	{
-		/* reloading of firmware is completed */
-		pAd->ate.bFWLoading = FALSE;
-		DBGPRINT(RT_DEBUG_ERROR, ("\n"));
-		j = 0;
-	}
-#endif // RALINK_ATE //
-
 	H2MMailbox.field.Owner	  = 1;	   // pass ownership to MCU
 	H2MMailbox.field.CmdToken = Token;
 	H2MMailbox.field.HighByte = Arg1;
@@ -7691,6 +7917,7 @@ BOOLEAN AsicSendCommandToMcu(
 	return TRUE;
 }
 
+#ifdef RT2860
 BOOLEAN AsicCheckCommanOk(
 	IN PRTMP_ADAPTER pAd,
 	IN UCHAR		 Command)
@@ -7755,6 +7982,7 @@ BOOLEAN AsicCheckCommanOk(
 
 	return FALSE;
 }
+#endif /* RT8260 */
 
 /*
 	========================================================================
@@ -7797,8 +8025,6 @@ VOID	RTMPCheckRates(
 	NdisMoveMemory(SupRate, NewRate, NewRateLen);
 }
 
-#ifdef CONFIG_STA_SUPPORT
-#ifdef DOT11_N_SUPPORT
 BOOLEAN RTMPCheckChannel(
 	IN PRTMP_ADAPTER pAd,
 	IN UCHAR		CentralChannel,
@@ -7944,8 +8170,6 @@ BOOLEAN 	RTMPCheckHt(
 	COPY_AP_HTSETTINGS_FROM_BEACON(pAd, pHtCapability);
 	return TRUE;
 }
-#endif // DOT11_N_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
 
 /*
 	========================================================================
@@ -7978,10 +8202,8 @@ VOID RTMPUpdateMlmeRate(
 			MinimumRate = RATE_1;
 			break;
 		case PHY_11BG_MIXED:
-#ifdef DOT11_N_SUPPORT
 		case PHY_11ABGN_MIXED:
 		case PHY_11BGN_MIXED:
-#endif // DOT11_N_SUPPORT //
 			if ((pAd->MlmeAux.SupRateLen == 4) &&
 				(pAd->MlmeAux.ExtRateLen == 0))
 				// B only AP
@@ -7995,13 +8217,11 @@ VOID RTMPUpdateMlmeRate(
 				MinimumRate = RATE_6;
 			break;
 		case PHY_11A:
-#ifdef DOT11_N_SUPPORT
 		case PHY_11N_2_4G:	// rt2860 need to check mlmerate for 802.11n
 		case PHY_11GN_MIXED:
 		case PHY_11AGN_MIXED:
 		case PHY_11AN_MIXED:
 		case PHY_11N_5G:
-#endif // DOT11_N_SUPPORT //
 			ProperMlmeRate = RATE_24;
 			MinimumRate = RATE_6;
 			break;
@@ -8111,6 +8331,58 @@ CHAR RTMPMaxRssi(
 	return larger;
 }
 
+#ifdef RT30xx
+// Antenna divesity use GPIO3 and EESK pin for control
+// Antenna and EEPROM access are both using EESK pin,
+// Therefor we should avoid accessing EESK at the same time
+// Then restore antenna after EEPROM access
+VOID AsicSetRxAnt(
+	IN PRTMP_ADAPTER	pAd,
+	IN UCHAR			Ant)
+{
+#ifdef RT30xx
+	UINT32	Value;
+	UINT32	x;
+
+	if ((pAd->EepromAccess)										||
+		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS))	||
+		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS))	||
+		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))			||
+		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
+	{
+		return;
+	}
+
+	// the antenna selection is through firmware and MAC register(GPIO3)
+	if (Ant == 0)
+	{
+		// Main antenna
+		RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
+		x |= (EESK);
+		RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
+
+		RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
+		Value &= ~(0x0808);
+		RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);
+		DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicSetRxAnt, switch to main antenna\n"));
+	}
+	else
+	{
+		// Aux antenna
+		RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
+		x &= ~(EESK);
+		RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
+
+		RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
+		Value &= ~(0x0808);
+		Value |= 0x08;
+		RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);
+		DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicSetRxAnt, switch to aux antenna\n"));
+	}
+#endif // RT30xx //
+}
+#endif /* RT30xx */
+
 /*
     ========================================================================
     Routine Description:
@@ -8129,14 +8401,7 @@ VOID AsicEvaluateRxAnt(
 {
 	UCHAR	BBPR3 = 0;
 
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+#ifndef RT30xx
 	{
 		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS	|
 								fRTMP_ADAPTER_HALT_IN_PROGRESS	|
@@ -8148,7 +8413,6 @@ VOID AsicEvaluateRxAnt(
 		if (pAd->StaCfg.Psm == PWR_SAVE)
 			return;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3);
 	BBPR3 &= (~0x18);
@@ -8165,10 +8429,11 @@ VOID AsicEvaluateRxAnt(
 		BBPR3 |= (0x0);
 	}
 	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+
+#ifdef RT2860
     	pAd->StaCfg.BBPR3 = BBPR3;
-#endif // CONFIG_STA_SUPPORT //
+#endif
+#ifdef RT2870
 	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
 		)
 	{
@@ -8187,6 +8452,90 @@ VOID AsicEvaluateRxAnt(
 			pAd->Mlme.bLowThroughput = TRUE;
 		}
 	}
+#endif
+#endif /* RT30xx */
+#ifdef RT30xx
+	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS	|
+							fRTMP_ADAPTER_HALT_IN_PROGRESS	|
+							fRTMP_ADAPTER_RADIO_OFF			|
+							fRTMP_ADAPTER_NIC_NOT_EXIST		|
+							fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS) ||
+							OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)
+#ifdef RT30xx
+							|| (pAd->EepromAccess)
+#endif // RT30xx //
+							)
+		return;
+
+
+	{
+		//if (pAd->StaCfg.Psm == PWR_SAVE)
+		//	return;
+	}
+
+	// two antenna selection mechanism- one is antenna diversity, the other is failed antenna remove
+	// one is antenna diversity:there is only one antenna can rx and tx
+	// the other is failed antenna remove:two physical antenna can rx and tx
+	if (pAd->NicConfig2.field.AntDiversity)
+	{
+		DBGPRINT(RT_DEBUG_TRACE,("AntDiv - before evaluate Pair1-Ant (%d,%d)\n",
+			pAd->RxAnt.Pair1PrimaryRxAnt, pAd->RxAnt.Pair1SecondaryRxAnt));
+
+		AsicSetRxAnt(pAd, pAd->RxAnt.Pair1SecondaryRxAnt);
+
+		pAd->RxAnt.EvaluatePeriod = 1; // 1:Means switch to SecondaryRxAnt, 0:Means switch to Pair1PrimaryRxAnt
+		pAd->RxAnt.FirstPktArrivedWhenEvaluate = FALSE;
+		pAd->RxAnt.RcvPktNumWhenEvaluate = 0;
+
+		// a one-shot timer to end the evalution
+		// dynamic adjust antenna evaluation period according to the traffic
+		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
+			RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 100);
+		else
+			RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 300);
+	}
+	else
+	{
+		if (pAd->StaCfg.Psm == PWR_SAVE)
+			return;
+
+		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3);
+		BBPR3 &= (~0x18);
+		if(pAd->Antenna.field.RxPath == 3)
+		{
+			BBPR3 |= (0x10);
+		}
+		else if(pAd->Antenna.field.RxPath == 2)
+		{
+			BBPR3 |= (0x8);
+		}
+		else if(pAd->Antenna.field.RxPath == 1)
+		{
+			BBPR3 |= (0x0);
+		}
+		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
+	}
+#endif /* RT30xx */
+
+	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
+		)
+	{
+		ULONG	TxTotalCnt = pAd->RalinkCounters.OneSecTxNoRetryOkCount +
+								pAd->RalinkCounters.OneSecTxRetryOkCount +
+								pAd->RalinkCounters.OneSecTxFailCount;
+
+			// dynamic adjust antenna evaluation period according to the traffic
+		if (TxTotalCnt > 50)
+		{
+			RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 20);
+			pAd->Mlme.bLowThroughput = FALSE;
+		}
+		else
+		{
+			RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 300);
+			pAd->Mlme.bLowThroughput = TRUE;
+		}
+	}
 }
 
 /*
@@ -8209,19 +8558,10 @@ VOID AsicRxAntEvalTimeout(
 	IN PVOID SystemSpecific3)
 {
 	RTMP_ADAPTER	*pAd = (RTMP_ADAPTER *)FunctionContext;
-#ifdef CONFIG_STA_SUPPORT
 	UCHAR			BBPR3 = 0;
 	CHAR			larger = -127, rssi0, rssi1, rssi2;
-#endif // CONFIG_STA_SUPPORT //
 
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+#ifndef RT30xx
 	{
 		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)	||
 			RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)		||
@@ -8279,11 +8619,111 @@ VOID AsicRxAntEvalTimeout(
 			BBPR3 |= (0x0);
 		}
 		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
+#ifdef RT2860
 		pAd->StaCfg.BBPR3 = BBPR3;
+#endif
 	}
+#endif /* RT30xx */
+#ifdef RT30xx
+	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS	|
+							fRTMP_ADAPTER_HALT_IN_PROGRESS	|
+							fRTMP_ADAPTER_RADIO_OFF			|
+							fRTMP_ADAPTER_NIC_NOT_EXIST) ||
+							OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)
+#ifdef RT30xx
+							|| (pAd->EepromAccess)
+#endif // RT30xx //
+							)
+		return;
 
-#endif // CONFIG_STA_SUPPORT //
+	{
+		//if (pAd->StaCfg.Psm == PWR_SAVE)
+		//	return;
 
+		if (pAd->NicConfig2.field.AntDiversity)
+		{
+			if ((pAd->RxAnt.RcvPktNumWhenEvaluate != 0) && (pAd->RxAnt.Pair1AvgRssi[pAd->RxAnt.Pair1SecondaryRxAnt] >= pAd->RxAnt.Pair1AvgRssi[pAd->RxAnt.Pair1PrimaryRxAnt]))
+			{
+				UCHAR			temp;
+
+				//
+				// select PrimaryRxAntPair
+				//    Role change, Used Pair1SecondaryRxAnt as PrimaryRxAntPair.
+				//    Since Pair1SecondaryRxAnt Quality good than Pair1PrimaryRxAnt
+				//
+				temp = pAd->RxAnt.Pair1PrimaryRxAnt;
+				pAd->RxAnt.Pair1PrimaryRxAnt = pAd->RxAnt.Pair1SecondaryRxAnt;
+				pAd->RxAnt.Pair1SecondaryRxAnt = temp;
+
+				pAd->RxAnt.Pair1LastAvgRssi = (pAd->RxAnt.Pair1AvgRssi[pAd->RxAnt.Pair1SecondaryRxAnt] >> 3);
+				pAd->RxAnt.EvaluateStableCnt = 0;
+			}
+			else
+			{
+				// if the evaluated antenna is not better than original, switch back to original antenna
+				AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt);
+				pAd->RxAnt.EvaluateStableCnt ++;
+			}
+
+			pAd->RxAnt.EvaluatePeriod = 0; // 1:Means switch to SecondaryRxAnt, 0:Means switch to Pair1PrimaryRxAnt
+
+			DBGPRINT(RT_DEBUG_TRACE,("AsicRxAntEvalAction::After Eval(fix in #%d), <%d, %d>, RcvPktNumWhenEvaluate=%ld\n",
+					pAd->RxAnt.Pair1PrimaryRxAnt, (pAd->RxAnt.Pair1AvgRssi[0] >> 3), (pAd->RxAnt.Pair1AvgRssi[1] >> 3), pAd->RxAnt.RcvPktNumWhenEvaluate));
+		}
+		else
+		{
+			if (pAd->StaCfg.Psm == PWR_SAVE)
+				return;
+
+			// if the traffic is low, use average rssi as the criteria
+			if (pAd->Mlme.bLowThroughput == TRUE)
+			{
+				rssi0 = pAd->StaCfg.RssiSample.LastRssi0;
+				rssi1 = pAd->StaCfg.RssiSample.LastRssi1;
+				rssi2 = pAd->StaCfg.RssiSample.LastRssi2;
+			}
+			else
+			{
+				rssi0 = pAd->StaCfg.RssiSample.AvgRssi0;
+				rssi1 = pAd->StaCfg.RssiSample.AvgRssi1;
+				rssi2 = pAd->StaCfg.RssiSample.AvgRssi2;
+			}
+
+			if(pAd->Antenna.field.RxPath == 3)
+			{
+				larger = max(rssi0, rssi1);
+
+				if (larger > (rssi2 + 20))
+					pAd->Mlme.RealRxPath = 2;
+				else
+					pAd->Mlme.RealRxPath = 3;
+			}
+			else if(pAd->Antenna.field.RxPath == 2)
+			{
+				if (rssi0 > (rssi1 + 20))
+					pAd->Mlme.RealRxPath = 1;
+				else
+					pAd->Mlme.RealRxPath = 2;
+			}
+
+			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3);
+			BBPR3 &= (~0x18);
+			if(pAd->Mlme.RealRxPath == 3)
+			{
+				BBPR3 |= (0x10);
+			}
+			else if(pAd->Mlme.RealRxPath == 2)
+			{
+				BBPR3 |= (0x8);
+			}
+			else if(pAd->Mlme.RealRxPath == 1)
+			{
+				BBPR3 |= (0x0);
+			}
+			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
+		}
+	}
+#endif /* RT30xx */
 }
 
 
@@ -8350,9 +8790,6 @@ BOOLEAN RTMPCheckEntryEnableAutoRateSwitch(
 {
 	BOOLEAN		result = TRUE;
 
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// only associated STA counts
 		if (pEntry && (pEntry->ValidAsCLI) && (pEntry->Sst == SST_ASSOC))
@@ -8361,15 +8798,7 @@ BOOLEAN RTMPCheckEntryEnableAutoRateSwitch(
 		}
 		else
 			result = FALSE;
-
-#ifdef QOS_DLS_SUPPORT
-		if (pEntry && (pEntry->ValidAsDls))
-			result = pAd->StaCfg.bAutoTxRateSwitch;
-#endif // QOS_DLS_SUPPORT //
 	}
-#endif // CONFIG_STA_SUPPORT //
-
-
 
 	return result;
 }
@@ -8378,14 +8807,9 @@ BOOLEAN RTMPCheckEntryEnableAutoRateSwitch(
 BOOLEAN RTMPAutoRateSwitchCheck(
 	IN PRTMP_ADAPTER    pAd)
 {
+	if (pAd->StaCfg.bAutoTxRateSwitch)
+		return TRUE;
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if (pAd->StaCfg.bAutoTxRateSwitch)
-			return TRUE;
-	}
-#endif // CONFIG_STA_SUPPORT //
 	return FALSE;
 }
 
@@ -8411,13 +8835,7 @@ UCHAR RTMPStaFixedTxMode(
 {
 	UCHAR	tx_mode = FIXED_TXMODE_HT;
 
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		tx_mode = (UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode;
-	}
-#endif // CONFIG_STA_SUPPORT //
+	tx_mode = (UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode;
 
 	return tx_mode;
 }
@@ -8474,7 +8892,6 @@ VOID RTMPUpdateLegacyTxSetting(
 	}
 }
 
-#ifdef CONFIG_STA_SUPPORT
 /*
 	==========================================================================
 	Description:
@@ -8505,7 +8922,12 @@ VOID AsicStaBbpTuning(
 		&& (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
 			)
 		&& !(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
+#ifdef RT2860
 		&& (pAd->bPCIclkOff == FALSE))
+#endif
+#ifdef RT2870
+		)
+#endif
 	{
 		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66, &OrigR66Value);
 		R66 = OrigR66Value;
@@ -8517,6 +8939,45 @@ VOID AsicStaBbpTuning(
 
 		if (pAd->LatchRfRegs.Channel <= 14)
 		{	//BG band
+#ifdef RT2870
+			// RT3070 is a no LNA solution, it should have different control regarding to AGC gain control
+			// Otherwise, it will have some throughput side effect when low RSSI
+#ifndef RT30xx
+			if (IS_RT3070(pAd))
+#endif
+#ifdef RT30xx
+			if (IS_RT30xx(pAd))
+#endif
+			{
+				if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY)
+				{
+					R66 = 0x1C + 2*GET_LNA_GAIN(pAd) + 0x20;
+					if (OrigR66Value != R66)
+					{
+#ifndef RT30xx
+						RTUSBWriteBBPRegister(pAd, BBP_R66, R66);
+#endif
+#ifdef RT30xx
+						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
+#endif
+					}
+				}
+				else
+				{
+					R66 = 0x1C + 2*GET_LNA_GAIN(pAd);
+					if (OrigR66Value != R66)
+					{
+#ifndef RT30xx
+						RTUSBWriteBBPRegister(pAd, BBP_R66, R66);
+#endif
+#ifdef RT30xx
+						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
+#endif
+					}
+				}
+			}
+			else
+#endif // RT2870 //
 			{
 				if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY)
 				{
@@ -8582,6 +9043,7 @@ VOID AsicStaBbpTuning(
 	}
 }
 
+#ifdef RT2860
 VOID AsicResetFromDMABusy(
 	IN PRTMP_ADAPTER pAd)
 {
@@ -8681,7 +9143,7 @@ VOID AsicResetPBF(
 		DBGPRINT(RT_DEBUG_TRACE, ("<---  Asic HardReset PBF !!!! \n"));
 	}
 }
-#endif // CONFIG_STA_SUPPORT //
+#endif /* RT2860 */
 
 VOID RTMPSetAGCInitValue(
 	IN PRTMP_ADAPTER	pAd,
@@ -8701,13 +9163,11 @@ VOID RTMPSetAGCInitValue(
 			R66 = (UCHAR)(0x32 + (GET_LNA_GAIN(pAd)*5)/3);
 			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
 		}
-#ifdef DOT11_N_SUPPORT
 		else
 		{
 			R66 = (UCHAR)(0x3A + (GET_LNA_GAIN(pAd)*5)/3);
 			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
 		}
-#endif // DOT11_N_SUPPORT //
 	}
 
 }
@@ -8722,6 +9182,15 @@ VOID AsicTurnOffRFClk(
 	UCHAR			index;
 	RTMP_RF_REGS	*RFRegTable;
 
+#ifdef RT30xx
+	// The RF programming sequence is difference between 3xxx and 2xxx
+	if (IS_RT3090(pAd))
+	{
+		RT30xxLoadRFSleepModeSetup(pAd);  // add by johnli,  RF power sequence setup, load RF sleep-mode setup
+	}
+	else
+	{
+#endif // RT30xx //
 	RFRegTable = RF2850RegTable;
 
 	switch (pAd->RfIcType)
@@ -8763,6 +9232,10 @@ VOID AsicTurnOffRFClk(
 		default:
 			break;
 	}
+#ifdef RT30xx
+	}
+#endif // RT30xx //
+
 }
 
 
@@ -8776,6 +9249,14 @@ VOID AsicTurnOnRFClk(
 	UCHAR			index;
 	RTMP_RF_REGS	*RFRegTable;
 
+#ifdef RT30xx
+	// The RF programming sequence is difference between 3xxx and 2xxx
+	if (IS_RT3090(pAd))
+	{
+	}
+	else
+	{
+#endif // RT30xx //
 	RFRegTable = RF2850RegTable;
 
 	switch (pAd->RfIcType)
@@ -8822,9 +9303,14 @@ VOID AsicTurnOnRFClk(
 			break;
 	}
 
+#ifndef RT30xx
 	DBGPRINT(RT_DEBUG_TRACE, ("AsicTurnOnRFClk#%d(RF=%d, ) , R2=0x%08x\n",
 		Channel,
 		pAd->RfIcType,
 		R2));
+#endif
+#ifdef RT30xx
+	}
+#endif // RT30xx //
 }
 
diff --git a/drivers/staging/rt2860/common/netif_block.c b/drivers/staging/rt2860/common/netif_block.c
deleted file mode 100644
index d3f7d087e7f..00000000000
--- a/drivers/staging/rt2860/common/netif_block.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-#include "../rt_config.h"
-#include "netif_block.h"
-
-static NETIF_ENTRY freeNetIfEntryPool[FREE_NETIF_POOL_SIZE];
-static LIST_HEADER freeNetIfEntryList;
-
-void initblockQueueTab(
-	IN PRTMP_ADAPTER pAd)
-{
-	int i;
-
-	initList(&freeNetIfEntryList);
-	for (i = 0; i < FREE_NETIF_POOL_SIZE; i++)
-		insertTailList(&freeNetIfEntryList, (PLIST_ENTRY)&freeNetIfEntryPool[i]);
-
-	for (i=0; i < NUM_OF_TX_RING; i++)
-		initList(&pAd->blockQueueTab[i].NetIfList);
-
-	return;
-}
-
-BOOLEAN blockNetIf(
-	IN PBLOCK_QUEUE_ENTRY pBlockQueueEntry,
-	IN PNET_DEV pNetDev)
-{
-	PNETIF_ENTRY pNetIfEntry = NULL;
-
-	if ((pNetIfEntry = (PNETIF_ENTRY)removeHeadList(&freeNetIfEntryList)) != NULL)
-	{
-		netif_stop_queue(pNetDev);
-		pNetIfEntry->pNetDev = pNetDev;
-		insertTailList(&pBlockQueueEntry->NetIfList, (PLIST_ENTRY)pNetIfEntry);
-
-		pBlockQueueEntry->SwTxQueueBlockFlag = TRUE;
-		DBGPRINT(RT_DEBUG_TRACE, ("netif_stop_queue(%s)\n", pNetDev->name));
-	}
-	else
-		return FALSE;
-
-	return TRUE;
-}
-
-VOID releaseNetIf(
-	IN PBLOCK_QUEUE_ENTRY pBlockQueueEntry)
-{
-	PNETIF_ENTRY pNetIfEntry = NULL;
-	PLIST_HEADER pNetIfList = &pBlockQueueEntry->NetIfList;
-
-	while((pNetIfEntry = (PNETIF_ENTRY)removeHeadList(pNetIfList)) !=  NULL)
-	{
-		PNET_DEV pNetDev = pNetIfEntry->pNetDev;
-		netif_wake_queue(pNetDev);
-		insertTailList(&freeNetIfEntryList, (PLIST_ENTRY)pNetIfEntry);
-
-		DBGPRINT(RT_DEBUG_TRACE, ("netif_wake_queue(%s)\n", pNetDev->name));
-	}
-	pBlockQueueEntry->SwTxQueueBlockFlag = FALSE;
-	return;
-}
-
-
-VOID StopNetIfQueue(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR QueIdx,
-	IN PNDIS_PACKET pPacket)
-{
-	PNET_DEV NetDev = NULL;
-	UCHAR IfIdx = 0;
-	BOOLEAN valid = FALSE;
-
-#ifdef APCLI_SUPPORT
-	if (RTMP_GET_PACKET_NET_DEVICE(pPacket) >= MIN_NET_DEVICE_FOR_APCLI)
-	{
-		IfIdx = (RTMP_GET_PACKET_NET_DEVICE(pPacket) - MIN_NET_DEVICE_FOR_APCLI) % MAX_APCLI_NUM;
-		NetDev = pAd->ApCfg.ApCliTab[IfIdx].dev;
-	}
-	else
-#endif // APCLI_SUPPORT //
-#ifdef WDS_SUPPORT
-	if (RTMP_GET_PACKET_NET_DEVICE(pPacket) >= MIN_NET_DEVICE_FOR_WDS)
-	{
-		IfIdx = (RTMP_GET_PACKET_NET_DEVICE(pPacket) - MIN_NET_DEVICE_FOR_WDS) % MAX_WDS_ENTRY;
-		NetDev = pAd->WdsTab.WdsEntry[IfIdx].dev;
-	}
-	else
-#endif // WDS_SUPPORT //
-	{
-#ifdef MBSS_SUPPORT
-		if (pAd->OpMode == OPMODE_AP)
-		{
-			IfIdx = (RTMP_GET_PACKET_NET_DEVICE(pPacket) - MIN_NET_DEVICE_FOR_MBSSID) % MAX_MBSSID_NUM;
-			NetDev = pAd->ApCfg.MBSSID[IfIdx].MSSIDDev;
-		}
-		else
-		{
-			IfIdx = MAIN_MBSSID;
-			NetDev = pAd->net_dev;
-		}
-#else
-		IfIdx = MAIN_MBSSID;
-		NetDev = pAd->net_dev;
-#endif
-	}
-
-	// WMM support 4 software queues.
-	// One software queue full doesn't mean device have no capbility to transmit packet.
-	// So disable block Net-If queue function while WMM enable.
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		valid = (pAd->CommonCfg.bWmmCapable == TRUE) ? FALSE : TRUE;
-#endif // CONFIG_STA_SUPPORT //
-
-	if (valid)
-		blockNetIf(&pAd->blockQueueTab[QueIdx], NetDev);
-	return;
-}
-
diff --git a/drivers/staging/rt2860/common/netif_block.h b/drivers/staging/rt2860/common/netif_block.h
deleted file mode 100644
index 6e5151c4109..00000000000
--- a/drivers/staging/rt2860/common/netif_block.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-#ifndef __NET_IF_BLOCK_H__
-#define __NET_IF_BLOCK_H__
-
-//#include <linux/device.h>
-#include "link_list.h"
-#include "rtmp.h"
-
-#define FREE_NETIF_POOL_SIZE 32
-
-typedef struct _NETIF_ENTRY
-{
-	struct _NETIF_ENTRY *pNext;
-	PNET_DEV pNetDev;
-} NETIF_ENTRY, *PNETIF_ENTRY;
-
-void initblockQueueTab(
-	IN PRTMP_ADAPTER pAd);
-
-BOOLEAN blockNetIf(
-	IN PBLOCK_QUEUE_ENTRY pBlockQueueEntry,
-	IN PNET_DEV pNetDev);
-
-VOID releaseNetIf(
-	IN PBLOCK_QUEUE_ENTRY pBlockQueueEntry);
-
-VOID StopNetIfQueue(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR QueIdx,
-	IN PNDIS_PACKET pPacket);
-#endif // __NET_IF_BLOCK_H__
-
diff --git a/drivers/staging/rt2860/common/rtmp_init.c b/drivers/staging/rt2860/common/rtmp_init.c
index 8a00cee3ee9..004f53023b0 100644
--- a/drivers/staging/rt2860/common/rtmp_init.c
+++ b/drivers/staging/rt2860/common/rtmp_init.c
@@ -38,8 +38,18 @@
     Jan Lee  2006-09-15    RT2860. Change for 802.11n , EEPROM, Led, BA, HT.
 */
 #include "../rt_config.h"
-#include 	"firmware.h"
+#ifndef RT30xx
+#ifdef RT2860
+#include "firmware.h"
 #include <linux/bitrev.h>
+#endif
+#ifdef RT2870
+#include "../../rt2870/common/firmware.h"
+#endif
+#endif
+#ifdef RT30xx
+#include "../../rt3070/firmware.h"
+#endif
 
 UCHAR    BIT8[] = {0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80};
 ULONG    BIT32[] = {0x00000001, 0x00000002, 0x00000004, 0x00000008,
@@ -90,6 +100,22 @@ const unsigned short ccitt_16Table[] = {
 #define ByteCRC16(v, crc) \
 	(unsigned short)((crc << 8) ^  ccitt_16Table[((crc >> 8) ^ (v)) & 255])
 
+#ifdef RT2870
+unsigned char BitReverse(unsigned char x)
+{
+	int i;
+	unsigned char Temp=0;
+	for(i=0; ; i++)
+	{
+		if(x & 0x80)	Temp |= 0x80;
+		if(i==7)		break;
+		x	<<= 1;
+		Temp >>= 1;
+	}
+	return Temp;
+}
+#endif
+
 //
 // BBP register initialization set
 //
@@ -114,6 +140,38 @@ REG_PAIR   BBPRegTable[] = {
 //
 // RF register initialization set
 //
+#ifdef RT2870
+REG_PAIR   RT30xx_RFRegTable[] = {
+        {RF_R04,          0x40},
+        {RF_R05,          0x03},
+        {RF_R06,          0x02},
+        {RF_R07,          0x70},
+        {RF_R09,          0x0F},
+#ifndef RT30xx
+        {RF_R10,          0x71},
+#endif
+#ifdef RT30xx
+        {RF_R10,          0x41},
+#endif
+        {RF_R11,          0x21},
+        {RF_R12,          0x7B},
+        {RF_R14,          0x90},
+        {RF_R15,          0x58},
+        {RF_R16,          0xB3},
+        {RF_R17,          0x92},
+        {RF_R18,          0x2C},
+        {RF_R19,          0x02},
+        {RF_R20,          0xBA},
+        {RF_R21,          0xDB},
+        {RF_R24,          0x16},
+        {RF_R25,          0x01},
+#ifndef RT30xx
+        {RF_R27,          0x03},
+#endif
+        {RF_R29,          0x1F},
+};
+#define	NUM_RF_REG_PARMS	(sizeof(RT30xx_RFRegTable) / sizeof(REG_PAIR))
+#endif // RT2870 //
 
 //
 // ASIC register initialization sets
@@ -146,10 +204,18 @@ RTMP_REG_PAIR	MACRegTable[] =	{
 	{AUTO_RSP_CFG,			0x00000013},	// Initial Auto_Responder, because QA will turn off Auto-Responder
 	{CCK_PROT_CFG,			0x05740003 /*0x01740003*/},	// Initial Auto_Responder, because QA will turn off Auto-Responder. And RTS threshold is enabled.
 	{OFDM_PROT_CFG,			0x05740003 /*0x01740003*/},	// Initial Auto_Responder, because QA will turn off Auto-Responder. And RTS threshold is enabled.
+//PS packets use Tx1Q (for HCCA) when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA)
+#ifdef RT2870
+	{PBF_CFG, 				0xf40006}, 		// Only enable Queue 2
+	{MM40_PROT_CFG,			0x3F44084},		// Initial Auto_Responder, because QA will turn off Auto-Responder
+	{WPDMA_GLO_CFG,			0x00000030},
+#endif // RT2870 //
 	{GF20_PROT_CFG,			0x01744004},    // set 19:18 --> Short NAV for MIMO PS
 	{GF40_PROT_CFG,			0x03F44084},
 	{MM20_PROT_CFG,			0x01744004},
+#ifdef RT2860
 	{MM40_PROT_CFG,			0x03F54084},
+#endif
 	{TXOP_CTRL_CFG,			0x0000583f, /*0x0000243f*/ /*0x000024bf*/},	//Extension channel backoff.
 	{TX_RTS_CFG,			0x00092b20},
 	{EXP_ACK_TIME,			0x002400ca},	// default value
@@ -163,20 +229,22 @@ RTMP_REG_PAIR	MACRegTable[] =	{
 	{PWR_PIN_CFG,			0x00000003},	// patch for 2880-E
 };
 
-
-#ifdef CONFIG_STA_SUPPORT
 RTMP_REG_PAIR	STAMACRegTable[] =	{
 	{WMM_AIFSN_CFG,		0x00002273},
 	{WMM_CWMIN_CFG,	0x00002344},
 	{WMM_CWMAX_CFG,	0x000034aa},
 };
-#endif // CONFIG_STA_SUPPORT //
 
 #define	NUM_MAC_REG_PARMS		(sizeof(MACRegTable) / sizeof(RTMP_REG_PAIR))
-#ifdef CONFIG_STA_SUPPORT
 #define	NUM_STA_MAC_REG_PARMS	(sizeof(STAMACRegTable) / sizeof(RTMP_REG_PAIR))
-#endif // CONFIG_STA_SUPPORT //
 
+#ifdef RT2870
+//
+// RT2870 Firmware Spec only used 1 oct for version expression
+//
+#define FIRMWARE_MINOR_VERSION	7
+
+#endif // RT2870 //
 
 // New 8k byte firmware size for RT3071/RT3072
 #define FIRMWAREIMAGE_MAX_LENGTH	0x2000
@@ -186,7 +254,9 @@ RTMP_REG_PAIR	STAMACRegTable[] =	{
 #define FIRMWAREIMAGEV1_LENGTH	0x1000
 #define FIRMWAREIMAGEV2_LENGTH	0x1000
 
+#ifdef RT2860
 #define FIRMWARE_MINOR_VERSION	2
+#endif
 
 
 /*
@@ -244,7 +314,9 @@ NDIS_STATUS	RTMPAllocAdapterBlock(
 
 		// Init spin locks
 		NdisAllocateSpinLock(&pAd->MgmtRingLock);
+#ifdef RT2860
 		NdisAllocateSpinLock(&pAd->RxRingLock);
+#endif
 
 		for (index =0 ; index < NUM_OF_TX_RING; index++)
 		{
@@ -974,67 +1046,6 @@ VOID	RTMPReadChannelPwr(
 
 	// 4. Print and Debug
 	choffset = 14 + 12 + 16 + 7;
-
-
-#if 0
-	// Init the 802.11j channel number for TX channel power
-	// 0. 20MHz
-	for (i = 0; i < 3; i++)
-	{
-		pAd->TxPower11J[i].Channel = 8 + i * 4;
-		pAd->TxPower11J[i].BW = BW_20;
-	}
-
-	for (i = 0; i < 4; i++)
-	{
-		pAd->TxPower11J[i + 3].Channel = 34 + i * 4;
-		pAd->TxPower11J[i + 3].BW = BW_20;
-	}
-
-	for (i = 0; i < 4; i++)
-	{
-		pAd->TxPower11J[i + 7].Channel = 184 + i * 4;
-		pAd->TxPower11J[i + 7].BW = BW_20;
-	}
-
-	// 0. 10MHz
-	for (i = 0; i < 2; i++)
-	{
-		pAd->TxPower11J[i + 11].Channel = 7 + i;
-		pAd->TxPower11J[i + 11].BW = BW_10;
-	}
-	pAd->TxPower11J[13].Channel = 11;
-	pAd->TxPower11J[13].BW = BW_10;
-
-	for (i = 0; i < 3; i++)
-	{
-		pAd->TxPower11J[i + 14].Channel = 183 + i;
-		pAd->TxPower11J[i + 14].BW= BW_10;
-	}
-
-	for (i = 0; i < 3; i++)
-	{
-		pAd->TxPower11J[i + 17].Channel = 187 + i;
-		pAd->TxPower11J[i + 17].BW = BW_10;
-	}
-	for (i = 0; i < 10; i++)
-	{
-		Power.word = RTMP_EEPROM_READ16(pAd, EEPROM_Japan_TX_PWR_OFFSET + i * 2);
-		Power2.word = RTMP_EEPROM_READ16(pAd, EEPROM_Japan_TX2_PWR_OFFSET + i * 2);
-
-		if ((Power.field.Byte0 < 36) && (Power.field.Byte0 > -6))
-			pAd->TxPower11J[i * 2].Power = Power.field.Byte0;
-
-		if ((Power.field.Byte1 < 36) && (Power.field.Byte1 > -6))
-			pAd->TxPower11J[i * 2 + 1].Power = Power.field.Byte1;
-
-		if ((Power2.field.Byte0 < 36) && (Power2.field.Byte0 > -6))
-			pAd->TxPower11J[i * 2].Power2 = Power2.field.Byte0;
-
-		if ((Power2.field.Byte1 < 36) && (Power2.field.Byte1 > -6))
-			pAd->TxPower11J[i * 2 + 1].Power2 = Power2.field.Byte1;
-	}
-#endif
 }
 
 /*
@@ -1071,6 +1082,425 @@ NDIS_STATUS	NICReadRegParameters(
 }
 
 
+#ifdef RT2870
+/*
+	========================================================================
+
+	Routine Description:
+		For RF filter calibration purpose
+
+	Arguments:
+		pAd                          Pointer to our adapter
+
+	Return Value:
+		None
+
+	IRQL = PASSIVE_LEVEL
+
+	========================================================================
+*/
+#ifndef RT30xx
+VOID RTUSBFilterCalibration(
+	IN PRTMP_ADAPTER pAd)
+{
+	UCHAR	R55x = 0, value, FilterTarget = 0x1E, BBPValue;
+	UINT	loop = 0, count = 0, loopcnt = 0, ReTry = 0;
+	UCHAR	RF_R24_Value = 0;
+
+	// Give bbp filter initial value
+	pAd->Mlme.CaliBW20RfR24 = 0x16;
+	pAd->Mlme.CaliBW40RfR24 = 0x36;  //Bit[5] must be 1 for BW 40
+
+	do
+	{
+		if (loop == 1)	//BandWidth = 40 MHz
+		{
+			// Write 0x27 to RF_R24 to program filter
+			RF_R24_Value = 0x27;
+			RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
+			FilterTarget = 0x19;
+
+			// when calibrate BW40, BBP mask must set to BW40.
+			RTUSBReadBBPRegister(pAd, BBP_R4, &BBPValue);
+			BBPValue&= (~0x18);
+			BBPValue|= (0x10);
+			RTUSBWriteBBPRegister(pAd, BBP_R4, BBPValue);
+		}
+		else			//BandWidth = 20 MHz
+		{
+			// Write 0x07 to RF_R24 to program filter
+			RF_R24_Value = 0x07;
+			RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
+			FilterTarget = 0x16;
+		}
+
+		// Write 0x01 to RF_R22 to enable baseband loopback mode
+		RT30xxReadRFRegister(pAd, RF_R22, &value);
+		value |= 0x01;
+		RT30xxWriteRFRegister(pAd, RF_R22, value);
+
+		// Write 0x00 to BBP_R24 to set power & frequency of passband test tone
+		RTUSBWriteBBPRegister(pAd, BBP_R24, 0);
+
+		do
+		{
+			// Write 0x90 to BBP_R25 to transmit test tone
+			RTUSBWriteBBPRegister(pAd, BBP_R25, 0x90);
+
+			RTMPusecDelay(1000);
+			// Read BBP_R55[6:0] for received power, set R55x = BBP_R55[6:0]
+			RTUSBReadBBPRegister(pAd, BBP_R55, &value);
+			R55x = value & 0xFF;
+
+		} while ((ReTry++ < 100) && (R55x == 0));
+
+		// Write 0x06 to BBP_R24 to set power & frequency of stopband test tone
+		RTUSBWriteBBPRegister(pAd, BBP_R24, 0x06);
+
+		while(TRUE)
+		{
+			// Write 0x90 to BBP_R25 to transmit test tone
+			RTUSBWriteBBPRegister(pAd, BBP_R25, 0x90);
+
+			//We need to wait for calibration
+			RTMPusecDelay(1000);
+			RTUSBReadBBPRegister(pAd, BBP_R55, &value);
+			value &= 0xFF;
+			if ((R55x - value) < FilterTarget)
+			{
+				RF_R24_Value ++;
+			}
+			else if ((R55x - value) == FilterTarget)
+			{
+				RF_R24_Value ++;
+				count ++;
+			}
+			else
+			{
+				break;
+			}
+
+			// prevent infinite loop cause driver hang.
+			if (loopcnt++ > 100)
+			{
+				DBGPRINT(RT_DEBUG_ERROR, ("RTUSBFilterCalibration - can't find a valid value, loopcnt=%d stop calibrating", loopcnt));
+				break;
+			}
+
+			// Write RF_R24 to program filter
+			RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
+		}
+
+		if (count > 0)
+		{
+			RF_R24_Value = RF_R24_Value - ((count) ? (1) : (0));
+		}
+
+		// Store for future usage
+		if (loopcnt < 100)
+		{
+			if (loop++ == 0)
+			{
+				//BandWidth = 20 MHz
+				pAd->Mlme.CaliBW20RfR24 = (UCHAR)RF_R24_Value;
+			}
+			else
+			{
+				//BandWidth = 40 MHz
+				pAd->Mlme.CaliBW40RfR24 = (UCHAR)RF_R24_Value;
+				break;
+			}
+		}
+		else
+			break;
+
+		RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
+
+		// reset count
+		count = 0;
+	} while(TRUE);
+
+	//
+	// Set back to initial state
+	//
+	RTUSBWriteBBPRegister(pAd, BBP_R24, 0);
+
+	RT30xxReadRFRegister(pAd, RF_R22, &value);
+	value &= ~(0x01);
+	RT30xxWriteRFRegister(pAd, RF_R22, value);
+
+	// set BBP back to BW20
+	RTUSBReadBBPRegister(pAd, BBP_R4, &BBPValue);
+	BBPValue&= (~0x18);
+	RTUSBWriteBBPRegister(pAd, BBP_R4, BBPValue);
+
+	DBGPRINT(RT_DEBUG_TRACE, ("RTUSBFilterCalibration - CaliBW20RfR24=0x%x, CaliBW40RfR24=0x%x\n", pAd->Mlme.CaliBW20RfR24, pAd->Mlme.CaliBW40RfR24));
+}
+#endif /* RT30xx */
+#ifdef RT30xx
+VOID RTMPFilterCalibration(
+	IN PRTMP_ADAPTER pAd)
+{
+	UCHAR	R55x = 0, value, FilterTarget = 0x1E, BBPValue=0;
+	UINT	loop = 0, count = 0, loopcnt = 0, ReTry = 0;
+	UCHAR	RF_R24_Value = 0;
+
+	// Give bbp filter initial value
+	pAd->Mlme.CaliBW20RfR24 = 0x1F;
+	pAd->Mlme.CaliBW40RfR24 = 0x2F; //Bit[5] must be 1 for BW 40
+
+	do
+	{
+		if (loop == 1)	//BandWidth = 40 MHz
+		{
+			// Write 0x27 to RF_R24 to program filter
+			RF_R24_Value = 0x27;
+			RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
+			if (IS_RT3090(pAd))
+				FilterTarget = 0x15;
+			else
+				FilterTarget = 0x19;
+
+			// when calibrate BW40, BBP mask must set to BW40.
+			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
+			BBPValue&= (~0x18);
+			BBPValue|= (0x10);
+			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
+
+			// set to BW40
+			RT30xxReadRFRegister(pAd, RF_R31, &value);
+			value |= 0x20;
+			RT30xxWriteRFRegister(pAd, RF_R31, value);
+		}
+		else			//BandWidth = 20 MHz
+		{
+			// Write 0x07 to RF_R24 to program filter
+			RF_R24_Value = 0x07;
+			RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
+			if (IS_RT3090(pAd))
+				FilterTarget = 0x13;
+			else
+				FilterTarget = 0x16;
+
+			// set to BW20
+			RT30xxReadRFRegister(pAd, RF_R31, &value);
+			value &= (~0x20);
+			RT30xxWriteRFRegister(pAd, RF_R31, value);
+		}
+
+		// Write 0x01 to RF_R22 to enable baseband loopback mode
+		RT30xxReadRFRegister(pAd, RF_R22, &value);
+		value |= 0x01;
+		RT30xxWriteRFRegister(pAd, RF_R22, value);
+
+		// Write 0x00 to BBP_R24 to set power & frequency of passband test tone
+		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0);
+
+		do
+		{
+			// Write 0x90 to BBP_R25 to transmit test tone
+			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R25, 0x90);
+
+			RTMPusecDelay(1000);
+			// Read BBP_R55[6:0] for received power, set R55x = BBP_R55[6:0]
+			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R55, &value);
+			R55x = value & 0xFF;
+
+		} while ((ReTry++ < 100) && (R55x == 0));
+
+		// Write 0x06 to BBP_R24 to set power & frequency of stopband test tone
+		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0x06);
+
+		while(TRUE)
+		{
+			// Write 0x90 to BBP_R25 to transmit test tone
+			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R25, 0x90);
+
+			//We need to wait for calibration
+			RTMPusecDelay(1000);
+			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R55, &value);
+			value &= 0xFF;
+			if ((R55x - value) < FilterTarget)
+			{
+				RF_R24_Value ++;
+			}
+			else if ((R55x - value) == FilterTarget)
+			{
+				RF_R24_Value ++;
+				count ++;
+			}
+			else
+			{
+				break;
+			}
+
+			// prevent infinite loop cause driver hang.
+			if (loopcnt++ > 100)
+			{
+				DBGPRINT(RT_DEBUG_ERROR, ("RTMPFilterCalibration - can't find a valid value, loopcnt=%d stop calibrating", loopcnt));
+				break;
+			}
+
+			// Write RF_R24 to program filter
+			RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
+		}
+
+		if (count > 0)
+		{
+			RF_R24_Value = RF_R24_Value - ((count) ? (1) : (0));
+		}
+
+		// Store for future usage
+		if (loopcnt < 100)
+		{
+			if (loop++ == 0)
+			{
+				//BandWidth = 20 MHz
+				pAd->Mlme.CaliBW20RfR24 = (UCHAR)RF_R24_Value;
+			}
+			else
+			{
+				//BandWidth = 40 MHz
+				pAd->Mlme.CaliBW40RfR24 = (UCHAR)RF_R24_Value;
+				break;
+			}
+		}
+		else
+			break;
+
+		RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
+
+		// reset count
+		count = 0;
+	} while(TRUE);
+
+	//
+	// Set back to initial state
+	//
+	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0);
+
+	RT30xxReadRFRegister(pAd, RF_R22, &value);
+	value &= ~(0x01);
+	RT30xxWriteRFRegister(pAd, RF_R22, value);
+
+	// set BBP back to BW20
+	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
+	BBPValue&= (~0x18);
+	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
+
+	DBGPRINT(RT_DEBUG_TRACE, ("RTMPFilterCalibration - CaliBW20RfR24=0x%x, CaliBW40RfR24=0x%x\n", pAd->Mlme.CaliBW20RfR24, pAd->Mlme.CaliBW40RfR24));
+}
+#endif /* RT30xx */
+
+VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd)
+{
+	INT i;
+	// Driver must read EEPROM to get RfIcType before initial RF registers
+	// Initialize RF register to default value
+#ifndef RT30xx
+        if (IS_RT3070(pAd) && ((pAd->RfIcType == RFIC_3020) ||(pAd->RfIcType == RFIC_2020)))
+        {
+                // Init RF calibration
+                // Driver should toggle RF R30 bit7 before init RF registers
+                ULONG RfReg = 0;
+                RT30xxReadRFRegister(pAd, RF_R30, (PUCHAR)&RfReg);
+                RfReg |= 0x80;
+                RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg);
+                RTMPusecDelay(1000);
+                RfReg &= 0x7F;
+                RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg);
+
+                // Initialize RF register to default value
+                for (i = 0; i < NUM_RF_REG_PARMS; i++)
+                {
+                        RT30xxWriteRFRegister(pAd, RT30xx_RFRegTable[i].Register, RT30xx_RFRegTable[i].Value);
+                }
+
+                //For RF filter Calibration
+                RTUSBFilterCalibration(pAd);
+        }
+#endif
+#ifdef RT30xx
+	if (IS_RT3070(pAd) || IS_RT3071(pAd))
+	{
+		// Init RF calibration
+		// Driver should toggle RF R30 bit7 before init RF registers
+		UINT32 RfReg = 0;
+		UINT32 data;
+
+		RT30xxReadRFRegister(pAd, RF_R30, (PUCHAR)&RfReg);
+		RfReg |= 0x80;
+		RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg);
+		RTMPusecDelay(1000);
+		RfReg &= 0x7F;
+		RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg);
+
+		// Initialize RF register to default value
+		for (i = 0; i < NUM_RF_REG_PARMS; i++)
+		{
+			RT30xxWriteRFRegister(pAd, RT30xx_RFRegTable[i].Register, RT30xx_RFRegTable[i].Value);
+		}
+
+		// add by johnli
+		if (IS_RT3070(pAd))
+		{
+			//  Update MAC 0x05D4 from 01xxxxxx to 0Dxxxxxx (voltage 1.2V to 1.35V) for RT3070 to improve yield rate
+			RTUSBReadMACRegister(pAd, LDO_CFG0, &data);
+			data = ((data & 0xF0FFFFFF) | 0x0D000000);
+			RTUSBWriteMACRegister(pAd, LDO_CFG0, data);
+		}
+		else if (IS_RT3071(pAd))
+		{
+			// Driver should set RF R6 bit6 on before init RF registers
+			RT30xxReadRFRegister(pAd, RF_R06, (PUCHAR)&RfReg);
+			RfReg |= 0x40;
+			RT30xxWriteRFRegister(pAd, RF_R06, (UCHAR)RfReg);
+
+			// init R31
+			RT30xxWriteRFRegister(pAd, RF_R31, 0x14);
+
+			// RT3071 version E has fixed this issue
+			if ((pAd->NicConfig2.field.DACTestBit == 1) && ((pAd->MACVersion & 0xffff) < 0x0211))
+			{
+				// patch tx EVM issue temporarily
+				RTUSBReadMACRegister(pAd, LDO_CFG0, &data);
+				data = ((data & 0xE0FFFFFF) | 0x0D000000);
+				RTUSBWriteMACRegister(pAd, LDO_CFG0, data);
+			}
+			else
+			{
+				RTMP_IO_READ32(pAd, LDO_CFG0, &data);
+				data = ((data & 0xE0FFFFFF) | 0x01000000);
+				RTMP_IO_WRITE32(pAd, LDO_CFG0, data);
+			}
+
+			// patch LNA_PE_G1 failed issue
+			RTUSBReadMACRegister(pAd, GPIO_SWITCH, &data);
+			data &= ~(0x20);
+			RTUSBWriteMACRegister(pAd, GPIO_SWITCH, data);
+		}
+
+		//For RF filter Calibration
+		RTMPFilterCalibration(pAd);
+
+		// Initialize RF R27 register, set RF R27 must be behind RTMPFilterCalibration()
+		if ((pAd->MACVersion & 0xffff) < 0x0211)
+			RT30xxWriteRFRegister(pAd, RF_R27, 0x3);
+
+		// set led open drain enable
+		RTUSBReadMACRegister(pAd, OPT_14, &data);
+		data |= 0x01;
+		RTUSBWriteMACRegister(pAd, OPT_14, data);
+
+		if (IS_RT3071(pAd))
+		{
+			// add by johnli, RF power sequence setup, load RF normal operation-mode setup
+			RT30xxLoadRFNormalModeSetup(pAd);
+		}
+	}
+#endif
+}
+#endif // RT2870 //
 
 
 /*
@@ -1245,11 +1675,25 @@ VOID	NICReadEEPROMParameters(
 	Antenna.word = pAd->EEPROMDefaultValue[0];
 	if (Antenna.word == 0xFFFF)
 	{
+#ifdef RT30xx
+		if(IS_RT3090(pAd))
+		{
+			Antenna.word = 0;
+			Antenna.field.RfIcType = RFIC_3020;
+			Antenna.field.TxPath = 1;
+			Antenna.field.RxPath = 1;
+		}
+		else
+		{
+#endif // RT30xx //
 		Antenna.word = 0;
 		Antenna.field.RfIcType = RFIC_2820;
 		Antenna.field.TxPath = 1;
 		Antenna.field.RxPath = 2;
 		DBGPRINT(RT_DEBUG_WARN, ("E2PROM error, hard code as 0x%04x\n", Antenna.word));
+#ifdef RT30xx
+		}
+#endif // RT30xx //
 	}
 
 	// Choose the desired Tx&Rx stream.
@@ -1277,12 +1721,10 @@ VOID	NICReadEEPROMParameters(
 
 	NicConfig2.word = pAd->EEPROMDefaultValue[1];
 
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
+#ifndef RT30xx
 		NicConfig2.word = 0;
+#endif
 		if ((NicConfig2.word & 0x00ff) == 0xff)
 		{
 			NicConfig2.word &= 0xff00;
@@ -1293,7 +1735,6 @@ VOID	NICReadEEPROMParameters(
 			NicConfig2.word &= 0x00ff;
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	if (NicConfig2.field.DynamicTxAgcControl == 1)
 		pAd->bAutoTxAgcA = pAd->bAutoTxAgcG = TRUE;
@@ -1314,13 +1755,11 @@ VOID	NICReadEEPROMParameters(
 		if ((pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED) ||
 			(pAd->CommonCfg.PhyMode == PHY_11A))
 			pAd->CommonCfg.PhyMode = PHY_11BG_MIXED;
-#ifdef DOT11_N_SUPPORT
 		else if ((pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED)	||
 				 (pAd->CommonCfg.PhyMode == PHY_11AN_MIXED) 	||
 				 (pAd->CommonCfg.PhyMode == PHY_11AGN_MIXED) 	||
 				 (pAd->CommonCfg.PhyMode == PHY_11N_5G))
 			pAd->CommonCfg.PhyMode = PHY_11BGN_MIXED;
-#endif // DOT11_N_SUPPORT //
 	}
 
 	// Read TSSI reference and TSSI boundary for temperature compensation. This is ugly
@@ -1411,9 +1850,7 @@ VOID	NICReadEEPROMParameters(
 		TmpPhy = pAd->CommonCfg.PhyMode;
 		pAd->CommonCfg.PhyMode = 0xff;
 		RTMPSetPhyMode(pAd, TmpPhy);
-#ifdef DOT11_N_SUPPORT
 		SetCommonHT(pAd);
-#endif // DOT11_N_SUPPORT //
 	}
 
 	//
@@ -1480,10 +1917,13 @@ VOID	NICReadEEPROMParameters(
 
 	RTMPReadTxPwrPerRate(pAd);
 
-#ifdef SINGLE_SKU
-	//pAd->CommonCfg.DefineMaxTxPwr = RTMP_EEPROM_READ16(pAd, EEPROM_DEFINE_MAX_TXPWR);
-	RT28xx_EEPROM_READ16(pAd, EEPROM_DEFINE_MAX_TXPWR, pAd->CommonCfg.DefineMaxTxPwr);
-#endif // SINGLE_SKU //
+#ifdef RT30xx
+	if (IS_RT30xx(pAd))
+	{
+		eFusePhysicalReadRegisters(pAd, EFUSE_TAG, 2, &value);
+		pAd->EFuseTag = (value & 0xff);
+	}
+#endif // RT30xx //
 
 	DBGPRINT(RT_DEBUG_TRACE, ("<-- NICReadEEPROMParameters\n"));
 }
@@ -1509,10 +1949,8 @@ VOID	NICReadEEPROMParameters(
 VOID	NICInitAsicFromEEPROM(
 	IN	PRTMP_ADAPTER	pAd)
 {
-#ifdef CONFIG_STA_SUPPORT
 	UINT32					data = 0;
 	UCHAR	BBPR1 = 0;
-#endif // CONFIG_STA_SUPPORT //
 	USHORT					i;
 	EEPROM_ANTENNA_STRUC	Antenna;
 	EEPROM_NIC_CONFIG2_STRUC    NicConfig2;
@@ -1531,16 +1969,49 @@ VOID	NICInitAsicFromEEPROM(
 		}
 	}
 
+#ifndef RT30xx
 	Antenna.word = pAd->Antenna.word;
+#endif
+#ifdef RT30xx
+	Antenna.word = pAd->EEPROMDefaultValue[0];
+	if (Antenna.word == 0xFFFF)
+	{
+		DBGPRINT(RT_DEBUG_ERROR, ("E2PROM error, hard code as 0x%04x\n", Antenna.word));
+		BUG_ON(Antenna.word == 0xFFFF);
+	}
+#endif
 	pAd->Mlme.RealRxPath = (UCHAR) Antenna.field.RxPath;
 	pAd->RfIcType = (UCHAR) Antenna.field.RfIcType;
 
+#ifdef RT30xx
+	DBGPRINT(RT_DEBUG_WARN, ("pAd->RfIcType = %d, RealRxPath=%d, TxPath = %d\n", pAd->RfIcType, pAd->Mlme.RealRxPath,Antenna.field.TxPath));
+
+	// Save the antenna for future use
+	pAd->Antenna.word = Antenna.word;
+#endif
 	NicConfig2.word = pAd->EEPROMDefaultValue[1];
 
+#ifdef RT30xx
+	{
+		if ((NicConfig2.word & 0x00ff) == 0xff)
+		{
+			NicConfig2.word &= 0xff00;
+		}
 
+		if ((NicConfig2.word >> 8) == 0xff)
+		{
+			NicConfig2.word &= 0x00ff;
+		}
+	}
+#endif
 	// Save the antenna for future use
 	pAd->NicConfig2.word = NicConfig2.word;
 
+#ifdef RT30xx
+	// set default antenna as main
+	if (pAd->RfIcType == RFIC_3020)
+		AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt);
+#endif
 	//
 	// Send LED Setting to MCU.
 	//
@@ -1549,7 +2020,13 @@ VOID	NICInitAsicFromEEPROM(
 		pAd->LedCntl.word = 0x01;
 		pAd->Led1 = 0x5555;
 		pAd->Led2 = 0x2221;
+#ifdef RT2860
 		pAd->Led3 = 0xA9F8;
+#endif
+
+#ifdef RT2870
+		pAd->Led3 = 0x5627;
+#endif // RT2870 //
 	}
 
 	AsicSendCommandToMcu(pAd, 0x52, 0xff, (UCHAR)pAd->Led1, (UCHAR)(pAd->Led1 >> 8));
@@ -1558,8 +2035,6 @@ VOID	NICInitAsicFromEEPROM(
     pAd->LedIndicatorStregth = 0xFF;
     RTMPSetSignalLED(pAd, -100);	// Force signal strength Led to be turned off, before link up
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Read Hardware controlled Radio state enable bit
 		if (NicConfig2.field.HardwareRadioControl == 1)
@@ -1585,13 +2060,14 @@ VOID	NICInitAsicFromEEPROM(
 		else
 		{
 			RTMPSetLED(pAd, LED_RADIO_ON);
+#ifdef RT2860
 			AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x02);
 			AsicSendCommandToMcu(pAd, 0x31, PowerWakeCID, 0x00, 0x00);
 			// 2-1. wait command ok.
 			AsicCheckCommanOk(pAd, PowerWakeCID);
+#endif
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// Turn off patching for cardbus controller
 	if (NicConfig2.field.CardbusAcceleration == 1)
@@ -1624,8 +2100,6 @@ VOID	NICInitAsicFromEEPROM(
 	}
 	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Handle the difference when 1T
 		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BBPR1);
@@ -1637,7 +2111,7 @@ VOID	NICInitAsicFromEEPROM(
 
 		DBGPRINT(RT_DEBUG_TRACE, ("Use Hw Radio Control Pin=%d; if used Pin=%d;\n", pAd->CommonCfg.bHardwareRadio, pAd->CommonCfg.bHardwareRadio));
 	}
-#endif // CONFIG_STA_SUPPORT //
+
 	DBGPRINT(RT_DEBUG_TRACE, ("TxPath = %d, RxPath = %d, RFIC=%d, Polar+LED mode=%x\n", pAd->Antenna.field.TxPath, pAd->Antenna.field.RxPath, pAd->RfIcType, pAd->LedCntl.word));
 	DBGPRINT(RT_DEBUG_TRACE, ("<-- NICInitAsicFromEEPROM\n"));
 }
@@ -1666,8 +2140,10 @@ NDIS_STATUS	NICInitializeAdapter(
 {
 	NDIS_STATUS     Status = NDIS_STATUS_SUCCESS;
 	WPDMA_GLO_CFG_STRUC	GloCfg;
+#ifdef RT2860
 	UINT32			Value;
 	DELAY_INT_CFG_STRUC	IntCfg;
+#endif
 	ULONG	i =0, j=0;
 	AC_TXOP_CSR0_STRUC	csr0;
 
@@ -1706,9 +2182,11 @@ retry:
 
 	// asic simulation sequence put this ahead before loading firmware.
 	// pbf hardware reset
+#ifdef RT2860
 	RTMP_IO_WRITE32(pAd, WPDMA_RST_IDX, 0x1003f);	// 0x10000 for reset rx, 0x3f resets all 6 tx rings.
 	RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0xe1f);
 	RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0xe00);
+#endif
 
 	// Initialze ASIC for TX & Rx operation
 	if (NICInitializeAsic(pAd , bHardReset) != NDIS_STATUS_SUCCESS)
@@ -1722,6 +2200,7 @@ retry:
 	}
 
 
+#ifdef RT2860
 	// Write AC_BK base address register
 	Value = RTMP_GetPhysicalAddressLow(pAd->TxRing[QID_AC_BK].Cell[0].AllocPa);
 	RTMP_IO_WRITE32(pAd, TX_BASE_PTR1, Value);
@@ -1794,6 +2273,7 @@ retry:
 	// Write RX_RING_CSR register
 	Value = RX_RING_SIZE;
 	RTMP_IO_WRITE32(pAd, RX_MAX_CNT, Value);
+#endif /* RT2860 */
 
 
 	// WMM parameter
@@ -1812,6 +2292,7 @@ retry:
 	RTMP_IO_WRITE32(pAd, WMM_TXOP1_CFG, csr0.word);
 
 
+#ifdef RT2860
 	// 3. Set DMA global configuration except TX_DMA_EN and RX_DMA_EN bits:
 	i = 0;
 	do
@@ -1830,6 +2311,7 @@ retry:
 
 	IntCfg.word = 0;
 	RTMP_IO_WRITE32(pAd, DELAY_INT_CFG, IntCfg.word);
+#endif
 
 
 	// reset action
@@ -1865,36 +2347,133 @@ NDIS_STATUS	NICInitializeAsic(
 	ULONG			Index = 0;
 	UCHAR			R0 = 0xff;
 	UINT32			MacCsr12 = 0, Counter = 0;
+#ifdef RT2870
+	UINT32			MacCsr0 = 0;
+	NTSTATUS		Status;
+	UCHAR			Value = 0xff;
+#endif // RT2870 //
+#ifdef RT30xx
+	UINT32			eFuseCtrl;
+#endif // RT30xx //
 	USHORT			KeyIdx;
 	INT				i,apidx;
 
 	DBGPRINT(RT_DEBUG_TRACE, ("--> NICInitializeAsic\n"));
 
+#ifdef RT2860
 	if (bHardReset == TRUE)
 	{
 		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x3);
 	}
 	else
 		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x1);
+#endif
+#ifdef RT2870
+	//
+	// Make sure MAC gets ready after NICLoadFirmware().
+	//
+	Index = 0;
+
+	//To avoid hang-on issue when interface up in kernel 2.4,
+	//we use a local variable "MacCsr0" instead of using "pAd->MACVersion" directly.
+	do
+	{
+		RTMP_IO_READ32(pAd, MAC_CSR0, &MacCsr0);
+
+		if ((MacCsr0 != 0x00) && (MacCsr0 != 0xFFFFFFFF))
+			break;
+
+		RTMPusecDelay(10);
+	} while (Index++ < 100);
+
+	pAd->MACVersion = MacCsr0;
+	DBGPRINT(RT_DEBUG_TRACE, ("MAC_CSR0  [ Ver:Rev=0x%08x]\n", pAd->MACVersion));
+	// turn on bit13 (set to zero) after rt2860D. This is to solve high-current issue.
+	RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &MacCsr12);
+	MacCsr12 &= (~0x2000);
+	RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, MacCsr12);
+
+	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x3);
+	RTMP_IO_WRITE32(pAd, USB_DMA_CFG, 0x0);
+	Status = RTUSBVenderReset(pAd);
+#endif
 
 	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x0);
+
 	// Initialize MAC register to default value
+#ifdef RT2860
 	for (Index = 0; Index < NUM_MAC_REG_PARMS; Index++)
 	{
 		RTMP_IO_WRITE32(pAd, MACRegTable[Index].Register, MACRegTable[Index].Value);
 	}
+#endif
+#ifdef RT2870
+	for(Index=0; Index<NUM_MAC_REG_PARMS; Index++)
+	{
+#ifdef RT3070
+		if ((MACRegTable[Index].Register == TX_SW_CFG0) && (IS_RT3070(pAd) || IS_RT3071(pAd)))
+		{
+			MACRegTable[Index].Value = 0x00000400;
+		}
+#endif // RT3070 //
+		RTMP_IO_WRITE32(pAd, (USHORT)MACRegTable[Index].Register, MACRegTable[Index].Value);
+	}
+
+#ifndef RT30xx
+	if(IS_RT3070(pAd))
+	{
+		// According to Frank Hsu (from Gary Tsao)
+		RTMP_IO_WRITE32(pAd, (USHORT)TX_SW_CFG0, 0x00000400);
+
+		// Initialize RT3070 serial MAC registers which is different from RT2870 serial
+		RTUSBWriteMACRegister(pAd, TX_SW_CFG1, 0);
+		RTUSBWriteMACRegister(pAd, TX_SW_CFG2, 0);
+	}
+#endif
+#endif // RT2870 //
 
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		for (Index = 0; Index < NUM_STA_MAC_REG_PARMS; Index++)
 		{
+#ifdef RT2860
 			RTMP_IO_WRITE32(pAd, STAMACRegTable[Index].Register, STAMACRegTable[Index].Value);
+#endif
+#ifdef RT2870
+			RTMP_IO_WRITE32(pAd, (USHORT)STAMACRegTable[Index].Register, STAMACRegTable[Index].Value);
+#endif
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
+#ifdef RT30xx
+	// Initialize RT3070 serial MAc registers which is different from RT2870 serial
+	if (IS_RT3090(pAd))
+	{
+		RTMP_IO_WRITE32(pAd, TX_SW_CFG1, 0);
+
+		// RT3071 version E has fixed this issue
+		if ((pAd->MACVersion & 0xffff) < 0x0211)
+		{
+			if (pAd->NicConfig2.field.DACTestBit == 1)
+			{
+				RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x1F);	// To fix throughput drop drastically
+			}
+			else
+			{
+				RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x0F);	// To fix throughput drop drastically
+			}
+		}
+		else
+		{
+			RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x0);
+		}
+	}
+	else if (IS_RT3070(pAd))
+	{
+		RTMP_IO_WRITE32(pAd, TX_SW_CFG1, 0);
+		RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x1F);	// To fix throughput drop drastically
+	}
+#endif // RT30xx //
 
 	//
 	// Before program BBP, we need to wait BBP/RF get wake up.
@@ -1935,11 +2514,69 @@ NDIS_STATUS	NICInitializeAsic(
 		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBPRegTable[Index].Register, BBPRegTable[Index].Value);
 	}
 
+#ifndef RT30xx
 	// for rt2860E and after, init BBP_R84 with 0x19. This is for extension channel overlapping IOT.
 	if ((pAd->MACVersion&0xffff) != 0x0101)
 		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x19);
 
+#ifdef RT2870
+	//write RT3070 BBP wchich different with 2870 after write RT2870 BBP
+	if (IS_RT3070(pAd))
+	{
+		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x0a);
+		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x99);
+		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R105, 0x05);
+	}
+#endif // RT2870 //
+#endif
+#ifdef RT30xx
+	// for rt2860E and after, init BBP_R84 with 0x19. This is for extension channel overlapping IOT.
+	// RT3090 should not program BBP R84 to 0x19, otherwise TX will block.
+	if (((pAd->MACVersion&0xffff) != 0x0101) && (!IS_RT30xx(pAd)))
+		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x19);
+
+// add by johnli, RF power sequence setup
+	if (IS_RT30xx(pAd))
+	{	//update for RT3070/71/72/90/91/92.
+		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R79, 0x13);
+		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R80, 0x05);
+		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R81, 0x33);
+	}
+
+	if (IS_RT3090(pAd))
+	{
+		UCHAR		bbpreg=0;
+
+		// enable DC filter
+		if ((pAd->MACVersion & 0xffff) >= 0x0211)
+		{
+			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R103, 0xc0);
+		}
 
+		// improve power consumption
+		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R138, &bbpreg);
+		if (pAd->Antenna.field.TxPath == 1)
+		{
+			// turn off tx DAC_1
+			bbpreg = (bbpreg | 0x20);
+		}
+
+		if (pAd->Antenna.field.RxPath == 1)
+		{
+			// turn off tx ADC_1
+			bbpreg &= (~0x2);
+		}
+		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R138, bbpreg);
+
+		// improve power consumption in RT3071 Ver.E
+		if ((pAd->MACVersion & 0xffff) >= 0x0211)
+		{
+			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R31, &bbpreg);
+			bbpreg &= (~0x3);
+			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R31, bbpreg);
+		}
+	}
+#endif
 	if (pAd->MACVersion == 0x28600100)
 	{
 		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x16);
@@ -1956,10 +2593,20 @@ NDIS_STATUS	NICInitializeAsic(
 		RTMP_IO_WRITE32(pAd, MAX_LEN_CFG, csr);
 	}
 
+#ifdef RT2870
+{
+	UCHAR	MAC_Value[]={0xff,0xff,0xff,0xff,0xff,0xff,0xff,0,0};
+
+	//Initialize WCID table
+	Value = 0xff;
+	for(Index =0 ;Index < 254;Index++)
+	{
+		RTUSBMultiWrite(pAd, (USHORT)(MAC_WCID_BASE + Index * 8), MAC_Value, 8);
+	}
+}
+#endif // RT2870 //
 
 	// Add radio off control
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (pAd->StaCfg.bRadio == FALSE)
 		{
@@ -1968,7 +2615,6 @@ NDIS_STATUS	NICInitializeAsic(
 			DBGPRINT(RT_DEBUG_TRACE, ("Set Radio Off\n"));
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// Clear raw counters
 	RTMP_IO_READ32(pAd, RX_STA_CNT0, &Counter);
@@ -2006,21 +2652,48 @@ NDIS_STATUS	NICInitializeAsic(
 				RTMP_IO_WRITE32(pAd, pAd->BeaconOffset[apidx] + i, 0x00);
 		}
 	}
+#ifdef RT2870
+	AsicDisableSync(pAd);
+	// Clear raw counters
+	RTMP_IO_READ32(pAd, RX_STA_CNT0, &Counter);
+	RTMP_IO_READ32(pAd, RX_STA_CNT1, &Counter);
+	RTMP_IO_READ32(pAd, RX_STA_CNT2, &Counter);
+	RTMP_IO_READ32(pAd, TX_STA_CNT0, &Counter);
+	RTMP_IO_READ32(pAd, TX_STA_CNT1, &Counter);
+	RTMP_IO_READ32(pAd, TX_STA_CNT2, &Counter);
+	// Default PCI clock cycle per ms is different as default setting, which is based on PCI.
+	RTMP_IO_READ32(pAd, USB_CYC_CFG, &Counter);
+	Counter&=0xffffff00;
+	Counter|=0x000001e;
+	RTMP_IO_WRITE32(pAd, USB_CYC_CFG, Counter);
+#endif // RT2870 //
+#ifdef RT30xx
+	pAd->bUseEfuse=FALSE;
+	RTMP_IO_READ32(pAd, EFUSE_CTRL, &eFuseCtrl);
+	pAd->bUseEfuse = ( (eFuseCtrl & 0x80000000) == 0x80000000) ? 1 : 0;
+	if(pAd->bUseEfuse)
+	{
+			DBGPRINT(RT_DEBUG_TRACE, ("NVM is Efuse\n"));
+	}
+	else
+	{
+			DBGPRINT(RT_DEBUG_TRACE, ("NVM is EEPROM\n"));
+
+	}
+#endif // RT30xx //
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// for rt2860E and after, init TXOP_CTRL_CFG with 0x583f. This is for extension channel overlapping IOT.
 		if ((pAd->MACVersion&0xffff) != 0x0101)
 			RTMP_IO_WRITE32(pAd, TXOP_CTRL_CFG, 0x583f);
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	DBGPRINT(RT_DEBUG_TRACE, ("<-- NICInitializeAsic\n"));
 	return NDIS_STATUS_SUCCESS;
 }
 
 
+#ifdef RT2860
 VOID NICRestoreBBPValue(
 	IN PRTMP_ADAPTER pAd)
 {
@@ -2144,6 +2817,7 @@ VOID NICRestoreBBPValue(
 
 	DBGPRINT(RT_DEBUG_TRACE, ("<---  NICRestoreBBPValue !!!!!!!!!!!!!!!!!!!!!!!  \n"));
 }
+#endif /* RT2860 */
 
 /*
 	========================================================================
@@ -2214,12 +2888,6 @@ VOID NICUpdateFifoStaCounters(
 	CHAR				reTry;
 	UCHAR				succMCS;
 
-#ifdef RALINK_ATE
-	/* Nothing to do in ATE mode */
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
 		do
 		{
 			RTMP_IO_READ32(pAd, TX_STA_FIFO, &StaFifo.word);
@@ -2244,10 +2912,8 @@ VOID NICUpdateFifoStaCounters(
 
 			pEntry->DebugFIFOCount++;
 
-#ifdef DOT11_N_SUPPORT
 			if (StaFifo.field.TxBF) // 3*3
 				pEntry->TxBFCount++;
-#endif // DOT11_N_SUPPORT //
 
 #ifdef UAPSD_AP_SUPPORT
 			UAPSD_SP_AUE_Handle(pAd, pEntry, StaFifo.field.TxSuccess);
@@ -2261,23 +2927,15 @@ VOID NICUpdateFifoStaCounters(
 				if (pEntry->FIFOCount >= 1)
 				{
 					DBGPRINT(RT_DEBUG_TRACE, ("#"));
-#if 0
-					SendRefreshBAR(pAd, pEntry);
 					pEntry->NoBADataCountDown = 64;
-#else
-#ifdef DOT11_N_SUPPORT
-					pEntry->NoBADataCountDown = 64;
-#endif // DOT11_N_SUPPORT //
 
 					if(pEntry->PsMode == PWR_ACTIVE)
 					{
-#ifdef DOT11_N_SUPPORT
 						int tid;
 						for (tid=0; tid<NUM_OF_TID; tid++)
 						{
 							BAOriSessionTearDown(pAd, pEntry->Aid,  tid, FALSE, FALSE);
 						}
-#endif // DOT11_N_SUPPORT //
 
 						// Update the continuous transmission counter except PS mode
 						pEntry->ContinueTxFailCnt++;
@@ -2289,14 +2947,10 @@ VOID NICUpdateFifoStaCounters(
 						pEntry->FIFOCount = 0;
 						pEntry->ContinueTxFailCnt = 0;
 					}
-#endif
-					//pEntry->FIFOCount = 0;
 				}
-				//pEntry->bSendBAR = TRUE;
 			}
 			else
 			{
-#ifdef DOT11_N_SUPPORT
 				if ((pEntry->PsMode != PWR_SAVE) && (pEntry->NoBADataCountDown > 0))
 				{
 					pEntry->NoBADataCountDown--;
@@ -2305,7 +2959,7 @@ VOID NICUpdateFifoStaCounters(
 						DBGPRINT(RT_DEBUG_TRACE, ("@\n"));
 					}
 				}
-#endif // DOT11_N_SUPPORT //
+
 				pEntry->FIFOCount = 0;
 				pEntry->OneSecTxNoRetryOkCount++;
 				// update NoDataIdleCount when sucessful send packet to STA.
@@ -2416,6 +3070,22 @@ VOID NICUpdateRawCounters(
 	// Update RX Overflow counter
 	pAd->Counters8023.RxNoBuffer += (RxStaCnt2.field.RxFifoOverflowCount);
 
+#ifdef RT2870
+	if (pAd->RalinkCounters.RxCount != pAd->watchDogRxCnt)
+	{
+		pAd->watchDogRxCnt = pAd->RalinkCounters.RxCount;
+		pAd->watchDogRxOverFlowCnt = 0;
+	}
+	else
+	{
+		if (RxStaCnt2.field.RxFifoOverflowCount)
+			pAd->watchDogRxOverFlowCnt++;
+		else
+			pAd->watchDogRxOverFlowCnt = 0;
+	}
+#endif // RT2870 //
+
+
 	if (!pAd->bUpdateBcnCntDone)
 	{
 	// Update BEACON sent count
@@ -2643,217 +3313,46 @@ VOID NICEraseFirmware(
 NDIS_STATUS NICLoadFirmware(
 	IN PRTMP_ADAPTER pAd)
 {
-#ifdef BIN_IN_FILE
-#define NICLF_DEFAULT_USE()	\
-	flg_default_firm_use = TRUE; \
-	printk("%s - Use default firmware!\n", __func__);
-
 	NDIS_STATUS		Status = NDIS_STATUS_SUCCESS;
-	PUCHAR			src;
-	struct file		*srcf;
-	INT 			retval, orgfsuid, orgfsgid, i;
-   	mm_segment_t	orgfs;
 	PUCHAR			pFirmwareImage;
-	UINT			FileLength = 0;
-	UINT32			MacReg;
-	ULONG			Index;
-	ULONG			firm;
-	BOOLEAN			flg_default_firm_use = FALSE;
-
-
-	DBGPRINT(RT_DEBUG_TRACE, ("===> %s\n", __func__));
-
-	/* init */
-	pFirmwareImage = NULL;
-	src = RTMP_FIRMWARE_FILE_NAME;
-
-	/* save uid and gid used for filesystem access.
-	   set user and group to 0 (root) */
-	orgfsuid = current->fsuid;
-	orgfsgid = current->fsgid;
-	current->fsuid = current->fsgid = 0;
-    orgfs = get_fs();
-    set_fs(KERNEL_DS);
-
-	pAd->FirmwareVersion = (FIRMWARE_MAJOR_VERSION << 8) + \
-						   FIRMWARE_MINOR_VERSION;
-
-
-	/* allocate firmware buffer */
-    pFirmwareImage = kmalloc(MAX_FIRMWARE_IMAGE_SIZE, MEM_ALLOC_FLAG);
-    if (pFirmwareImage == NULL)
-	{
-		/* allocate fail, use default firmware array in firmware.h */
-		printk("%s - Allocate memory fail!\n", __func__);
-		NICLF_DEFAULT_USE();
-    }
-	else
-	{
-		/* allocate ok! zero the firmware buffer */
-		memset(pFirmwareImage, 0x00, MAX_FIRMWARE_IMAGE_SIZE);
-	} /* End of if */
-
+	ULONG			FileLength, Index;
+	//ULONG			firm;
+	UINT32			MacReg = 0;
+#ifdef RT2870
+	UINT32			Version = (pAd->MACVersion >> 16);
+#endif // RT2870 //
 
-	/* if ok, read firmware file from *.bin file */
-	if (flg_default_firm_use == FALSE)
+	pFirmwareImage = FirmwareImage;
+	FileLength = sizeof(FirmwareImage);
+#ifdef RT2870
+	// New 8k byte firmware size for RT3071/RT3072
+	//printk("Usb Chip\n");
+	if (FIRMWAREIMAGE_LENGTH == FIRMWAREIMAGE_MAX_LENGTH)
+	//The firmware image consists of two parts. One is the origianl and the other is the new.
+	//Use Second Part
 	{
-		do
-		{
-			/* open the bin file */
-			srcf = filp_open(src, O_RDONLY, 0);
-
-			if (IS_ERR(srcf))
-			{
-				printk("%s - Error %ld opening %s\n",
-					   __func__, -PTR_ERR(srcf), src);
-				NICLF_DEFAULT_USE();
-				break;
-			} /* End of if */
-
-			/* the object must have a read method */
-			if ((srcf->f_op == NULL) || (srcf->f_op->read == NULL))
-			{
-				printk("%s - %s does not have a write method\n", __func__, src);
-				NICLF_DEFAULT_USE();
-				break;
-			} /* End of if */
-
-			/* read the firmware from the file *.bin */
-			FileLength = srcf->f_op->read(srcf,
-										  pFirmwareImage,
-										  MAX_FIRMWARE_IMAGE_SIZE,
-										  &srcf->f_pos);
-
-			if (FileLength != MAX_FIRMWARE_IMAGE_SIZE)
-			{
-				printk("%s: error file length (=%d) in RT2860AP.BIN\n",
-					   __func__, FileLength);
-				NICLF_DEFAULT_USE();
-				break;
-			}
-			else
-			{
-				PUCHAR ptr = pFirmwareImage;
-				USHORT crc = 0xffff;
-
-
-				/* calculate firmware CRC */
-				for(i=0; i<(MAX_FIRMWARE_IMAGE_SIZE-2); i++, ptr++)
-					crc = ByteCRC16(bitrev8(*ptr), crc);
-				/* End of for */
-
-				if ((pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-2] != \
-								(UCHAR)bitrev8((UCHAR)(crc>>8))) ||
-					(pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-1] != \
-								(UCHAR)bitrev8((UCHAR)crc)))
-				{
-					/* CRC fail */
-					printk("%s: CRC = 0x%02x 0x%02x "
-						   "error, should be 0x%02x 0x%02x\n",
-						   __func__,
-						   pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-2],
-						   pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-1],
-						   (UCHAR)(crc>>8), (UCHAR)(crc));
-					NICLF_DEFAULT_USE();
-					break;
-				}
-				else
-				{
-					/* firmware is ok */
-					pAd->FirmwareVersion = \
-						(pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-4] << 8) +
-						pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-3];
-
-					/* check if firmware version of the file is too old */
-					if ((pAd->FirmwareVersion) < \
-											((FIRMWARE_MAJOR_VERSION << 8) +
-									  	 	 FIRMWARE_MINOR_VERSION))
-					{
-						printk("%s: firmware version too old!\n", __func__);
-						NICLF_DEFAULT_USE();
-						break;
-					} /* End of if */
-				} /* End of if */
-
-				DBGPRINT(RT_DEBUG_TRACE,
-						 ("NICLoadFirmware: CRC ok, ver=%d.%d\n",
-						  pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-4],
-						  pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-3]));
-			} /* End of if (FileLength == MAX_FIRMWARE_IMAGE_SIZE) */
-			break;
-		} while(TRUE);
-
-		/* close firmware file */
-		if (IS_ERR(srcf))
-			;
+		if ((Version != 0x2860) && (Version != 0x2872) && (Version != 0x3070))
+		{	// Use Firmware V2.
+			//printk("KH:Use New Version,part2\n");
+			pFirmwareImage = (PUCHAR)&FirmwareImage[FIRMWAREIMAGEV1_LENGTH];
+			FileLength = FIRMWAREIMAGEV2_LENGTH;
+		}
 		else
 		{
-			retval = filp_close(srcf, NULL);
-			if (retval)
-			{
-				DBGPRINT(RT_DEBUG_ERROR,
-						 ("--> Error %d closing %s\n", -retval, src));
-			} /* End of if */
-		} /* End of if */
-	} /* End of if */
-
-
-	/* write firmware to ASIC */
-	if (flg_default_firm_use == TRUE)
-	{
-		/* use default fimeware, free allocated buffer */
-		if (pFirmwareImage != NULL)
-			kfree(pFirmwareImage);
-		/* End of if */
-
-		/* use default *.bin array */
-		pFirmwareImage = FirmwareImage;
-		FileLength = sizeof(FirmwareImage);
-	} /* End of if */
-
-	/* enable Host program ram write selection */
-	RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0x10000);
-
-	for(i=0; i<FileLength; i+=4)
-	{
-		firm = pFirmwareImage[i] +
-			   (pFirmwareImage[i+3] << 24) +
-			   (pFirmwareImage[i+2] << 16) +
-			   (pFirmwareImage[i+1] << 8);
-
-		RTMP_IO_WRITE32(pAd, FIRMWARE_IMAGE_BASE + i, firm);
-	} /* End of for */
-
-	RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0x00000);
-	RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0x00001);
-
-	/* initialize BBP R/W access agent */
-	RTMP_IO_WRITE32(pAd, H2M_BBP_AGENT, 0);
-	RTMP_IO_WRITE32(pAd, H2M_MAILBOX_CSR, 0);
-
-	if (flg_default_firm_use == FALSE)
+			//printk("KH:Use New Version,part1\n");
+			pFirmwareImage = FirmwareImage;
+			FileLength = FIRMWAREIMAGEV1_LENGTH;
+		}
+	}
+	else
 	{
-		/* use file firmware, free allocated buffer */
-		if (pFirmwareImage != NULL)
-			kfree(pFirmwareImage);
-		/* End of if */
-	} /* End of if */
+		DBGPRINT(RT_DEBUG_ERROR, ("KH: bin file should be 8KB.\n"));
+		Status = NDIS_STATUS_FAILURE;
+	}
 
-	set_fs(orgfs);
-	current->fsuid = orgfsuid;
-	current->fsgid = orgfsgid;
-#else
+#endif // RT2870 //
 
-	NDIS_STATUS		Status = NDIS_STATUS_SUCCESS;
-	PUCHAR			pFirmwareImage;
-	ULONG			FileLength, Index;
-	//ULONG			firm;
-	UINT32			MacReg = 0;
-
-	pFirmwareImage = FirmwareImage;
-	FileLength = sizeof(FirmwareImage);
 	RT28XX_WRITE_FIRMWARE(pAd, pFirmwareImage, FileLength);
-#endif
 
 	/* check if MCU is ready */
 	Index = 0;
@@ -2867,7 +3366,7 @@ NDIS_STATUS NICLoadFirmware(
 		RTMPusecDelay(1000);
 	} while (Index++ < 1000);
 
-    if (Index >= 1000)
+    if (Index > 1000)
 	{
 		Status = NDIS_STATUS_FAILURE;
 		DBGPRINT(RT_DEBUG_ERROR, ("NICLoadFirmware: MCU is not ready\n\n\n"));
@@ -3118,6 +3617,31 @@ VOID	UserCfgInit(
 	//
 	//  part I. intialize common configuration
 	//
+#ifdef RT2870
+	pAd->BulkOutReq = 0;
+
+	pAd->BulkOutComplete = 0;
+	pAd->BulkOutCompleteOther = 0;
+	pAd->BulkOutCompleteCancel = 0;
+	pAd->BulkInReq = 0;
+	pAd->BulkInComplete = 0;
+	pAd->BulkInCompleteFail = 0;
+
+	//pAd->QuickTimerP = 100;
+	//pAd->TurnAggrBulkInCount = 0;
+	pAd->bUsbTxBulkAggre = 0;
+
+	// init as unsed value to ensure driver will set to MCU once.
+	pAd->LedIndicatorStregth = 0xFF;
+
+	pAd->CommonCfg.MaxPktOneTxBulk = 2;
+	pAd->CommonCfg.TxBulkFactor = 1;
+	pAd->CommonCfg.RxBulkFactor =1;
+
+	pAd->CommonCfg.TxPower = 100; //mW
+
+	NdisZeroMemory(&pAd->CommonCfg.IOTestParm, sizeof(pAd->CommonCfg.IOTestParm));
+#endif // RT2870 //
 
 	for(key_index=0; key_index<SHARE_KEY_NUM; key_index++)
 	{
@@ -3128,14 +3652,19 @@ VOID	UserCfgInit(
 		}
 	}
 
+#ifdef RT30xx
+	pAd->EepromAccess = FALSE;
+#endif
 	pAd->Antenna.word = 0;
 	pAd->CommonCfg.BBPCurrentBW = BW_20;
 
 	pAd->LedCntl.word = 0;
+#ifdef RT2860
 	pAd->LedIndicatorStregth = 0;
 	pAd->RLnkCtrlOffset = 0;
 	pAd->HostLnkCtrlOffset = 0;
 	pAd->CheckDmaBusyCount = 0;
+#endif
 
 	pAd->bAutoTxAgcA = FALSE;			// Default is OFF
 	pAd->bAutoTxAgcG = FALSE;			// Default is OFF
@@ -3176,23 +3705,11 @@ VOID	UserCfgInit(
 
 	NdisZeroMemory(&pAd->BeaconTxWI, sizeof(pAd->BeaconTxWI));
 
-#ifdef DOT11_N_SUPPORT
 	NdisZeroMemory(&pAd->CommonCfg.HtCapability, sizeof(pAd->CommonCfg.HtCapability));
 	pAd->HTCEnable = FALSE;
 	pAd->bBroadComHT = FALSE;
 	pAd->CommonCfg.bRdg = FALSE;
 
-#ifdef DOT11N_DRAFT3
-	pAd->CommonCfg.Dot11OBssScanPassiveDwell = dot11OBSSScanPassiveDwell;	// Unit : TU. 5~1000
-	pAd->CommonCfg.Dot11OBssScanActiveDwell = dot11OBSSScanActiveDwell;	// Unit : TU. 10~1000
-	pAd->CommonCfg.Dot11BssWidthTriggerScanInt = dot11BSSWidthTriggerScanInterval;	// Unit : Second
-	pAd->CommonCfg.Dot11OBssScanPassiveTotalPerChannel = dot11OBSSScanPassiveTotalPerChannel;	// Unit : TU. 200~10000
-	pAd->CommonCfg.Dot11OBssScanActiveTotalPerChannel = dot11OBSSScanActiveTotalPerChannel;	// Unit : TU. 20~10000
-	pAd->CommonCfg.Dot11BssWidthChanTranDelayFactor = dot11BSSWidthChannelTransactionDelayFactor;
-	pAd->CommonCfg.Dot11OBssScanActivityThre = dot11BSSScanActivityThreshold;	// Unit : percentage
-	pAd->CommonCfg.Dot11BssWidthChanTranDelay = (pAd->CommonCfg.Dot11BssWidthTriggerScanInt * pAd->CommonCfg.Dot11BssWidthChanTranDelayFactor);
-#endif  // DOT11N_DRAFT3 //
-
 	NdisZeroMemory(&pAd->CommonCfg.AddHTInfo, sizeof(pAd->CommonCfg.AddHTInfo));
 	pAd->CommonCfg.BACapability.field.MMPSmode = MMPS_ENABLE;
 	pAd->CommonCfg.BACapability.field.MpduDensity = 0;
@@ -3213,7 +3730,6 @@ VOID	UserCfgInit(
 	pAd->CommonCfg.TxBASize = 7;
 
 	pAd->CommonCfg.REGBACapability.word = pAd->CommonCfg.BACapability.word;
-#endif // DOT11_N_SUPPORT //
 
 	//pAd->CommonCfg.HTPhyMode.field.BW = BW_20;
 	//pAd->CommonCfg.HTPhyMode.field.MCS = MCS_AUTO;
@@ -3230,8 +3746,6 @@ VOID	UserCfgInit(
 	//
 	// part II. intialize STA specific configuration
 	//
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		RX_FILTER_SET_FLAG(pAd, fRX_FILTER_ACCEPT_DIRECT);
 		RX_FILTER_CLEAR_FLAG(pAd, fRX_FILTER_ACCEPT_MULTICAST);
@@ -3270,11 +3784,6 @@ VOID	UserCfgInit(
 		pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
 	}
 
-#ifdef EXT_BUILD_CHANNEL_LIST
-	pAd->StaCfg.IEEE80211dClientMode = Rt802_11_D_None;
-#endif // EXT_BUILD_CHANNEL_LIST //
-#endif // CONFIG_STA_SUPPORT //
-
 	// global variables mXXXX used in MAC protocol state machines
 	OPSTATUS_SET_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM);
 	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_ADHOC_ON);
@@ -3284,21 +3793,12 @@ VOID	UserCfgInit(
 	pAd->CommonCfg.PhyMode = PHY_11BG_MIXED;		// default PHY mode
 	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);  // CCK use LONG preamble
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// user desired power mode
 		pAd->StaCfg.WindowsPowerMode = Ndis802_11PowerModeCAM;
 		pAd->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeCAM;
 		pAd->StaCfg.bWindowsACCAMEnable = FALSE;
 
-#ifdef LEAP_SUPPORT
-		// CCX v1.0 releated init value
-		RTMPInitTimer(pAd, &pAd->StaCfg.LeapAuthTimer, GET_TIMER_FUNCTION(LeapAuthTimeout), pAd, FALSE);
-		pAd->StaCfg.LeapAuthMode = CISCO_AuthModeLEAPNone;
-		pAd->StaCfg.bCkipOn = FALSE;
-#endif // LEAP_SUPPORT //
-
 		RTMPInitTimer(pAd, &pAd->StaCfg.StaQuickResponeForRateUpTimer, GET_TIMER_FUNCTION(StaQuickResponeForRateUpExec), pAd, FALSE);
 		pAd->StaCfg.StaQuickResponeForRateUpTimerRunning = FALSE;
 
@@ -3326,17 +3826,11 @@ VOID	UserCfgInit(
 		NdisZeroMemory(pAd->nickname, IW_ESSID_MAX_SIZE+1);
 		sprintf(pAd->nickname, "%s", STA_NIC_DEVICE_NAME);
 		RTMPInitTimer(pAd, &pAd->StaCfg.WpaDisassocAndBlockAssocTimer, GET_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc), pAd, FALSE);
-#ifdef WPA_SUPPLICANT_SUPPORT
 		pAd->StaCfg.IEEE8021X = FALSE;
 		pAd->StaCfg.IEEE8021x_required_keys = FALSE;
 		pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_DISABLE;
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
 		pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_ENABLE;
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// Default for extra information is not valid
 	pAd->ExtraInfo = EXTRA_INFO_CLEAR;
@@ -3373,41 +3867,12 @@ VOID	UserCfgInit(
 	InitializeQueueHeader(&pAd->MacTab.McastPsQueue);
 	NdisAllocateSpinLock(&pAd->MacTabLock);
 
-#ifdef RALINK_ATE
-	NdisZeroMemory(&pAd->ate, sizeof(ATE_INFO));
-	pAd->ate.Mode = ATE_STOP;
-	pAd->ate.TxCount = 200;/* to exceed TX_RING_SIZE ... */
-	pAd->ate.TxLength = 1024;
-	pAd->ate.TxWI.ShortGI = 0;// LONG GI : 800 ns
-	pAd->ate.TxWI.PHYMODE = MODE_CCK;
-	pAd->ate.TxWI.MCS = 3;
-	pAd->ate.TxWI.BW = BW_20;
-	pAd->ate.Channel = 1;
-	pAd->ate.QID = QID_AC_BE;
-	pAd->ate.Addr1[0] = 0x00;
-	pAd->ate.Addr1[1] = 0x11;
-	pAd->ate.Addr1[2] = 0x22;
-	pAd->ate.Addr1[3] = 0xAA;
-	pAd->ate.Addr1[4] = 0xBB;
-	pAd->ate.Addr1[5] = 0xCC;
-	NdisMoveMemory(pAd->ate.Addr2, pAd->ate.Addr1, ETH_LENGTH_OF_ADDRESS);
-	NdisMoveMemory(pAd->ate.Addr3, pAd->ate.Addr1, ETH_LENGTH_OF_ADDRESS);
-	pAd->ate.bRxFer = 0;
-	pAd->ate.bQATxStart = FALSE;
-	pAd->ate.bQARxStart = FALSE;
-	pAd->ate.bFWLoading = FALSE;
-#ifdef RALINK_28xx_QA
-	//pAd->ate.Repeat = 0;
-	pAd->ate.TxStatus = 0;
-	pAd->ate.AtePid = THREAD_PID_INIT_VALUE;
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
-
 	pAd->CommonCfg.bWiFiTest = FALSE;
+#ifdef RT2860
 	pAd->bPCIclkOff = FALSE;
 
 	RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
+#endif
 	DBGPRINT(RT_DEBUG_TRACE, ("<-- UserCfgInit\n"));
 }
 
@@ -3509,6 +3974,9 @@ VOID	RTMPInitTimer(
 	pTimer->State      = FALSE;
 	pTimer->cookie = (ULONG) pData;
 
+#ifdef RT2870
+	pTimer->pAd = pAd;
+#endif // RT2870 //
 
 	RTMP_OS_Init_Timer(pAd,	&pTimer->TimerObj,	pTimerFunc, (PVOID) pTimer);
 }
@@ -3635,6 +4103,12 @@ VOID	RTMPCancelTimer(
 		if (*pCancelled == TRUE)
 			pTimer->State = TRUE;
 
+#ifdef RT2870
+		// We need to go-through the TimerQ to findout this timer handler and remove it if
+		//		it's still waiting for execution.
+
+		RT2870_TimerQ_Remove(pTimer->pAd, pTimer);
+#endif // RT2870 //
 	}
 	else
 	{
@@ -3674,13 +4148,6 @@ VOID RTMPSetLED(
 	UCHAR			HighByte = 0;
 	UCHAR			LowByte;
 
-// In ATE mode of RT2860 AP/STA, we have erased 8051 firmware.
-// So LED mode is not supported when ATE is running.
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
 	LowByte = pAd->LedCntl.field.LedMode&0x7f;
 	switch (Status)
 	{
diff --git a/drivers/staging/rt2860/common/rtmp_tkip.c b/drivers/staging/rt2860/common/rtmp_tkip.c
index a87ea3a5d3e..4a7fda69f9b 100644
--- a/drivers/staging/rt2860/common/rtmp_tkip.c
+++ b/drivers/staging/rt2860/common/rtmp_tkip.c
@@ -199,15 +199,9 @@ typedef	struct	PACKED _IV_CONTROL_
 			{
 				struct PACKED
 				{
-#ifdef RT_BIG_ENDIAN
-					UCHAR	KeyID:2;
-					UCHAR	ExtIV:1;
-					UCHAR	Rsvd:5;
-#else
 					UCHAR	Rsvd:5;
 					UCHAR	ExtIV:1;
 					UCHAR	KeyID:2;
-#endif
 				}	field;
 				UCHAR		Byte;
 			}	CONTROL;
@@ -1114,10 +1108,6 @@ BOOLEAN RTMPSoftDecryptTKIP(
 	UCHAR			MIC[8];
 	UCHAR			TrailMIC[8];
 
-#ifdef RT_BIG_ENDIAN
-	RTMPFrameEndianChange(pAd, (PUCHAR)pData, DIR_READ, FALSE);
-#endif
-
 	fc0 = *pData;
 	fc1 = *(pData + 1);
 
@@ -1224,9 +1214,6 @@ BOOLEAN RTMPSoftDecryptTKIP(
 		return (FALSE);
 	}
 
-#ifdef RT_BIG_ENDIAN
-	RTMPFrameEndianChange(pAd, (PUCHAR)pData, DIR_READ, FALSE);
-#endif
 	return TRUE;
 }
 
@@ -1266,10 +1253,6 @@ BOOLEAN RTMPSoftDecryptAES(
 	UCHAR			MIC[8];
 	UCHAR			TrailMIC[8];
 
-#ifdef RT_BIG_ENDIAN
-	RTMPFrameEndianChange(pAd, (PUCHAR)pData, DIR_READ, FALSE);
-#endif
-
 	fc0 = *pData;
 	fc1 = *(pData + 1);
 
@@ -1437,10 +1420,6 @@ BOOLEAN RTMPSoftDecryptAES(
 		return FALSE;
 	}
 
-#ifdef RT_BIG_ENDIAN
-	RTMPFrameEndianChange(pAd, (PUCHAR)pData, DIR_READ, FALSE);
-#endif
-
 	return TRUE;
 }
 
diff --git a/drivers/staging/rt2860/common/rtmp_wep.c b/drivers/staging/rt2860/common/rtmp_wep.c
index ffe26c23795..8e833e7011b 100644
--- a/drivers/staging/rt2860/common/rtmp_wep.c
+++ b/drivers/staging/rt2860/common/rtmp_wep.c
@@ -144,14 +144,12 @@ VOID	RTMPInitWepEngine(
 
 	pAd->PrivateInfo.FCSCRC32 = PPPINITFCS32;   //Init crc32.
 
-#ifdef CONFIG_STA_SUPPORT
     if (pAd->StaCfg.bCkipOn && (pAd->StaCfg.CkipFlag & 0x10) && (pAd->OpMode == OPMODE_STA))
     {
         ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, pKey, KeyLen);  //INIT SBOX, KEYLEN+3(IV)
         NdisMoveMemory(pDest, pKey, 3);  //Append Init Vector
     }
     else
-#endif // CONFIG_STA_SUPPORT //
     {
 		NdisMoveMemory(WEPKEY + 3, pKey, KeyLen);
 
diff --git a/drivers/staging/rt2860/common/spectrum.c b/drivers/staging/rt2860/common/spectrum.c
index b3650ec4656..101c2923ca3 100644
--- a/drivers/staging/rt2860/common/spectrum.c
+++ b/drivers/staging/rt2860/common/spectrum.c
@@ -1060,27 +1060,6 @@ VOID NotifyChSwAnnToPeerAPs(
 	IN UINT8 ChSwMode,
 	IN UINT8 Channel)
 {
-#ifdef WDS_SUPPORT
-	if (!((pRA[0] & 0xff) == 0xff)) // is pRA a broadcase address.
-	{
-		INT i;
-		// info neighbor APs that Radar signal found throgh WDS link.
-		for (i = 0; i < MAX_WDS_ENTRY; i++)
-		{
-			if (ValidWdsEntry(pAd, i))
-			{
-				PUCHAR pDA = pAd->WdsTab.WdsEntry[i].PeerWdsAddr;
-
-				// DA equal to SA. have no necessary orignal AP which found Radar signal.
-				if (MAC_ADDR_EQUAL(pTA, pDA))
-					continue;
-
-				// send Channel Switch Action frame to info Neighbro APs.
-				EnqueueChSwAnn(pAd, pDA, ChSwMode, Channel);
-			}
-		}
-	}
-#endif // WDS_SUPPORT //
 }
 
 static VOID StartDFSProcedure(
@@ -1090,9 +1069,9 @@ static VOID StartDFSProcedure(
 {
 	// start DFS procedure
 	pAd->CommonCfg.Channel = Channel;
-#ifdef DOT11_N_SUPPORT
+
 	N_ChannelCheck(pAd);
-#endif // DOT11_N_SUPPORT //
+
 	pAd->CommonCfg.RadarDetect.RDMode = RD_SWITCHING_MODE;
 	pAd->CommonCfg.RadarDetect.CSCount = 0;
 }
@@ -1475,10 +1454,8 @@ static VOID PeerChSwAnnAction(
 {
 	CH_SW_ANN_INFO ChSwAnnInfo;
 	PFRAME_802_11 pFr = (PFRAME_802_11)Elem->Msg;
-#ifdef CONFIG_STA_SUPPORT
 	UCHAR index = 0, Channel = 0, NewChannel = 0;
 	ULONG Bssidx = 0;
-#endif // CONFIG_STA_SUPPORT //
 
 	NdisZeroMemory(&ChSwAnnInfo, sizeof(CH_SW_ANN_INFO));
 	if (! PeerChSwAnnSanity(pAd, Elem->Msg, Elem->MsgLen, &ChSwAnnInfo))
@@ -1487,8 +1464,6 @@ static VOID PeerChSwAnnAction(
 		return;
 	}
 
-
-#ifdef CONFIG_STA_SUPPORT
 	if (pAd->OpMode == OPMODE_STA)
 	{
 		Bssidx = BssTableSearch(&pAd->ScanTab, pFr->Hdr.Addr3, pAd->CommonCfg.Channel);
@@ -1535,7 +1510,6 @@ static VOID PeerChSwAnnAction(
 			}
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	return;
 }
@@ -1596,7 +1570,12 @@ static VOID PeerMeasureReportAction(
 
 	if ((pMeasureReportInfo = kmalloc(sizeof(MEASURE_RPI_REPORT), GFP_ATOMIC)) == NULL)
 	{
+#ifndef RT30xx
 		DBGPRINT(RT_DEBUG_ERROR, ("%s unable to alloc memory for measure report buffer (size=%zu).\n", __func__, sizeof(MEASURE_RPI_REPORT)));
+#endif
+#ifdef RT30xx
+		DBGPRINT(RT_DEBUG_ERROR, ("%s unable to alloc memory for measure report buffer (size=%d).\n", __func__, sizeof(MEASURE_RPI_REPORT)));
+#endif
 		return;
 	}
 
@@ -1756,28 +1735,6 @@ VOID PeerSpectrumAction(
 
 		case SPEC_CHANNEL_SWITCH:
 {
-#ifdef DOT11N_DRAFT3
-				SEC_CHA_OFFSET_IE	Secondary;
-				CHA_SWITCH_ANNOUNCE_IE	ChannelSwitch;
-
-				// 802.11h only has Channel Switch Announcement IE.
-				RTMPMoveMemory(&ChannelSwitch, &Elem->Msg[LENGTH_802_11+4], sizeof (CHA_SWITCH_ANNOUNCE_IE));
-
-				// 802.11n D3.03 adds secondary channel offset element in the end.
-				if (Elem->MsgLen ==  (LENGTH_802_11 + 2 + sizeof (CHA_SWITCH_ANNOUNCE_IE) + sizeof (SEC_CHA_OFFSET_IE)))
-				{
-					RTMPMoveMemory(&Secondary, &Elem->Msg[LENGTH_802_11+9], sizeof (SEC_CHA_OFFSET_IE));
-				}
-				else
-				{
-					Secondary.SecondaryChannelOffset = 0;
-				}
-
-				if ((Elem->Msg[LENGTH_802_11+2] == IE_CHANNEL_SWITCH_ANNOUNCEMENT) && (Elem->Msg[LENGTH_802_11+3] == 3))
-				{
-					ChannelSwitchAction(pAd, Elem->Wcid, ChannelSwitch.NewChannel, Secondary.SecondaryChannelOffset);
-				}
-#endif // DOT11N_DRAFT3 //
 }
 			PeerChSwAnnAction(pAd, Elem);
 			break;
diff --git a/drivers/staging/rt2860/leap.h b/drivers/staging/rt2860/leap.h
deleted file mode 100644
index 6818c1ff4d7..00000000000
--- a/drivers/staging/rt2860/leap.h
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	leap.h
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Name		Date			Modification logs
-*/
-#ifndef __LEAP_H__
-#define __LEAP_H__
-
-// Messages for Associate state machine
-#define LEAP_MACHINE_BASE                   30
-
-#define LEAP_MSG_REQUEST_IDENTITY           31
-#define LEAP_MSG_REQUEST_LEAP               32
-#define LEAP_MSG_SUCCESS                    33
-#define LEAP_MSG_FAILED                     34
-#define LEAP_MSG_RESPONSE_LEAP              35
-#define LEAP_MSG_EAPOLKEY                   36
-#define LEAP_MSG_UNKNOWN                    37
-#define LEAP_MSG                            38
-//! assoc state-machine states
-#define LEAP_IDLE                           0
-#define LEAP_WAIT_IDENTITY_REQUEST          1
-#define LEAP_WAIT_CHANLLENGE_REQUEST        2
-#define LEAP_WAIT_SUCCESS                   3
-#define LEAP_WAIT_CHANLLENGE_RESPONSE       4
-#define LEAP_WAIT_EAPOLKEY                  5
-
-#define LEAP_REASON_INVALID_AUTH                    0x01
-#define LEAP_REASON_AUTH_TIMEOUT                    0x02
-#define LEAP_REASON_CHALLENGE_FROM_AP_FAILED        0x03
-#define LEAP_REASON_CHALLENGE_TO_AP_FAILED          0x04
-
-#define CISCO_AuthModeLEAP                          0x80
-#define CISCO_AuthModeLEAPNone                      0x00
-#define LEAP_AUTH_TIMEOUT                           30000
-#define LEAP_CHALLENGE_RESPONSE_LENGTH              24
-#define LEAP_CHALLENGE_REQUEST_LENGTH               8
-
-typedef struct _LEAP_EAPOL_HEADER_ {
-    UCHAR       Version;
-    UCHAR       Type;
-    UCHAR       Length[2];
-} LEAP_EAPOL_HEADER, *PLEAP_EAPOL_HEADER;
-
-typedef struct _LEAP_EAPOL_PACKET_ {
-    UCHAR       Code;
-    UCHAR       Identifier;
-    UCHAR       Length[2];
-    UCHAR       Type;
-} LEAP_EAPOL_PACKET, *PLEAP_EAPOL_PACKET;
-
-typedef struct _LEAP_EAP_CONTENTS_ {
-    UCHAR       Version;
-    UCHAR       Reserved;
-    UCHAR       Length;
-} LEAP_EAP_CONTENTS, *PLEAP_EAP_CONTENTS;
-
-/*** EAPOL key ***/
-typedef struct _EAPOL_KEY_HEADER_ {
-    UCHAR       Type;
-    UCHAR       Length[2];
-    UCHAR       Counter[8];
-    UCHAR       IV[16];
-    UCHAR       Index;
-    UCHAR       Signature[16];
-} EAPOL_KEY_HEADER, *PEAPOL_KEY_HEADER;
-
-BOOLEAN LeapMsgTypeSubst(
-    IN  UCHAR   EAPType,
-    OUT ULONG   *MsgType);
-
-VOID LeapMachinePerformAction(
-    IN PRTMP_ADAPTER    pAd,
-    IN STATE_MACHINE    *S,
-    IN MLME_QUEUE_ELEM  *Elem);
-
-VOID LeapMacHeaderInit(
-    IN  PRTMP_ADAPTER       pAd,
-    IN  OUT PHEADER_802_11  pHdr80211,
-    IN  UCHAR               wep,
-    IN  PUCHAR              pAddr3);
-
-VOID LeapStartAction(
-    IN PRTMP_ADAPTER    pAd,
-    IN MLME_QUEUE_ELEM  *Elem);
-
-VOID LeapIdentityAction(
-    IN PRTMP_ADAPTER    pAd,
-    IN MLME_QUEUE_ELEM  *Elem);
-
-VOID LeapPeerChallengeAction(
-    IN PRTMP_ADAPTER    pAd,
-    IN MLME_QUEUE_ELEM  *Elem);
-
-VOID HashPwd(
-    IN  PUCHAR  pwd,
-    IN  INT     pwdlen,
-    OUT PUCHAR  hash);
-
-VOID PeerChallengeResponse(
-    IN  PUCHAR  szChallenge,
-    IN  PUCHAR  smbPasswd,
-    OUT PUCHAR  szResponse);
-
-VOID ParityKey(
-    OUT PUCHAR  szOut,
-    IN  PUCHAR  szIn);
-
-VOID DesKey(
-    OUT ULONG   k[16][2],
-    IN  PUCHAR  key,
-    IN  INT     decrypt);
-
-VOID Des(
-    IN  ULONG   ks[16][2],
-    OUT UCHAR   block[8]);
-
-VOID DesEncrypt(
-    IN  PUCHAR  szClear,
-    IN  PUCHAR  szKey,
-    OUT PUCHAR  szOut);
-
-VOID LeapNetworkChallengeAction(
-    IN PRTMP_ADAPTER    pAd,
-    IN MLME_QUEUE_ELEM  *Elem);
-
-VOID LeapNetworkChallengeResponse(
-    IN PRTMP_ADAPTER    pAd,
-    IN MLME_QUEUE_ELEM  *Elem);
-
-VOID HashpwdHash(
-    IN  PUCHAR  hash,
-    IN  PUCHAR  hashhash);
-
-VOID ProcessSessionKey(
-    OUT PUCHAR  SessionKey,
-    IN  PUCHAR  hash2,
-    IN  PUCHAR  ChallengeToRadius,
-    IN  PUCHAR  ChallengeResponseFromRadius,
-    IN  PUCHAR  ChallengeFromRadius,
-    IN  PUCHAR  ChallengeResponseToRadius);
-
-VOID LeapEapolKeyAction(
-    IN PRTMP_ADAPTER    pAd,
-    IN MLME_QUEUE_ELEM  *Elem);
-
-VOID RogueApTableInit(
-    IN ROGUEAP_TABLE    *Tab);
-
-ULONG RogueApTableSearch(
-    IN ROGUEAP_TABLE    *Tab,
-    IN PUCHAR           pAddr);
-
-VOID RogueApEntrySet(
-    IN  PRTMP_ADAPTER   pAd,
-    OUT ROGUEAP_ENTRY   *pRogueAp,
-    IN PUCHAR           pAddr,
-    IN UCHAR            FaileCode);
-
-ULONG RogueApTableSetEntry(
-    IN  PRTMP_ADAPTER   pAd,
-    OUT ROGUEAP_TABLE  *Tab,
-    IN PUCHAR           pAddr,
-    IN UCHAR            FaileCode);
-
-VOID RogueApTableDeleteEntry(
-    IN OUT ROGUEAP_TABLE *Tab,
-    IN PUCHAR          pAddr);
-
-VOID LeapAuthTimeout(
-    IN PVOID SystemSpecific1,
-    IN PVOID FunctionContext,
-    IN PVOID SystemSpecific2,
-    IN PVOID SystemSpecific3);
-
-VOID LeapSendRogueAPReport(
-    IN  PRTMP_ADAPTER   pAd);
-
-BOOLEAN CCKMAssocRspSanity(
-    IN PRTMP_ADAPTER    pAd,
-    IN VOID             *Msg,
-    IN ULONG            MsgLen);
-
-#endif  // __LEAP_H__
diff --git a/drivers/staging/rt2860/mlme.h b/drivers/staging/rt2860/mlme.h
index 5cb61652b66..3d1a8284fbd 100644
--- a/drivers/staging/rt2860/mlme.h
+++ b/drivers/staging/rt2860/mlme.h
@@ -73,17 +73,7 @@
 #define MAX_CHANNEL_TIME            140       // unit: msec, for single band scan
 #define	FAST_ACTIVE_SCAN_TIME	    30 		  // Active scan waiting for probe response time
 #define CW_MIN_IN_BITS              4         // actual CwMin = 2^CW_MIN_IN_BITS - 1
-
-
-#ifdef CONFIG_STA_SUPPORT
-#ifndef CONFIG_AP_SUPPORT
 #define CW_MAX_IN_BITS              10        // actual CwMax = 2^CW_MAX_IN_BITS - 1
-#endif
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef CONFIG_APSTA_MIXED_SUPPORT
-extern UINT32 CW_MAX_IN_BITS;
-#endif // CONFIG_APSTA_MIXED_SUPPORT //
 
 // Note: RSSI_TO_DBM_OFFSET has been changed to variable for new RF (2004-0720).
 // SHould not refer to this constant anymore
@@ -115,10 +105,7 @@ extern UINT32 CW_MAX_IN_BITS;
 
 #define BSS_NOT_FOUND                    0xFFFFFFFF
 
-
-#ifdef CONFIG_STA_SUPPORT
 #define MAX_LEN_OF_MLME_QUEUE            40 //10
-#endif // CONFIG_STA_SUPPORT //
 
 #define SCAN_PASSIVE                     18		// scan with no probe request, only wait beacon and probe response
 #define SCAN_ACTIVE                      19		// scan with probe request, and wait beacon and probe response
@@ -128,10 +115,6 @@ extern UINT32 CW_MAX_IN_BITS;
 #define	SCAN_CISCO_CHANNEL_LOAD			 23		// Single channel passive scan for channel load collection
 #define FAST_SCAN_ACTIVE                 24		// scan with probe request, and wait beacon and probe response
 
-#ifdef DOT11N_DRAFT3
-#define SCAN_2040_BSS_COEXIST                  26
-#endif // DOT11N_DRAFT3 //
-
 #define MAC_ADDR_IS_GROUP(Addr)       (((Addr[0]) & 0x01))
 #define MAC_ADDR_HASH(Addr)            (Addr[0] ^ Addr[1] ^ Addr[2] ^ Addr[3] ^ Addr[4] ^ Addr[5])
 #define MAC_ADDR_HASH_INDEX(Addr)      (MAC_ADDR_HASH(Addr) % HASH_TABLE_SIZE)
@@ -204,22 +187,6 @@ if (((__pEntry)) != NULL) \
 //
 //  HT Capability INFO field in HT Cap IE .
 typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-	USHORT	LSIGTxopProSup:1;
-	USHORT	Forty_Mhz_Intolerant:1;
-	USHORT	PSMP:1;
-	USHORT	CCKmodein40:1;
-	USHORT	AMsduSize:1;
-	USHORT	DelayedBA:1;	//rt2860c not support
-	USHORT	RxSTBC:2;
-	USHORT	TxSTBC:1;
-	USHORT	ShortGIfor40:1;	//for40MHz
-	USHORT	ShortGIfor20:1;
-	USHORT	GF:1;	//green field
-	USHORT	MimoPs:2;//momi power safe
-	USHORT	ChannelWidth:1;
-	USHORT	AdvCoding:1;
-#else
 	USHORT	AdvCoding:1;
 	USHORT	ChannelWidth:1;
 	USHORT	MimoPs:2;//momi power safe
@@ -234,53 +201,29 @@ typedef struct PACKED {
 	USHORT	PSMP:1;
 	USHORT	Forty_Mhz_Intolerant:1;
 	USHORT	LSIGTxopProSup:1;
-#endif	/* !RT_BIG_ENDIAN */
 } HT_CAP_INFO, *PHT_CAP_INFO;
 
 //  HT Capability INFO field in HT Cap IE .
 typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-	UCHAR	rsv:3;//momi power safe
-	UCHAR	MpduDensity:3;
-	UCHAR	MaxRAmpduFactor:2;
-#else
 	UCHAR	MaxRAmpduFactor:2;
 	UCHAR	MpduDensity:3;
 	UCHAR	rsv:3;//momi power safe
-#endif /* !RT_BIG_ENDIAN */
 } HT_CAP_PARM, *PHT_CAP_PARM;
 
 //  HT Capability INFO field in HT Cap IE .
 typedef struct PACKED {
 	UCHAR	MCSSet[10];
 	UCHAR	SupRate[2];  // unit : 1Mbps
-#ifdef RT_BIG_ENDIAN
-	UCHAR	rsv:3;
-	UCHAR	MpduDensity:1;
-	UCHAR	TxStream:2;
-	UCHAR	TxRxNotEqual:1;
-	UCHAR	TxMCSSetDefined:1;
-#else
 	UCHAR	TxMCSSetDefined:1;
 	UCHAR	TxRxNotEqual:1;
 	UCHAR	TxStream:2;
 	UCHAR	MpduDensity:1;
 	UCHAR	rsv:3;
-#endif // RT_BIG_ENDIAN //
 	UCHAR	rsv3[3];
 } HT_MCS_SET, *PHT_MCS_SET;
 
 //  HT Capability INFO field in HT Cap IE .
 typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-	USHORT	rsv2:4;
-	USHORT	RDGSupport:1;	//reverse Direction Grant  support
-	USHORT	PlusHTC:1;	//+HTC control field support
-	USHORT	MCSFeedback:2;	//0:no MCS feedback, 2:unsolicited MCS feedback, 3:Full MCS feedback,  1:rsv.
-	USHORT	rsv:5;//momi power safe
-	USHORT	TranTime:2;
-	USHORT	Pco:1;
-#else
 	USHORT	Pco:1;
 	USHORT	TranTime:2;
 	USHORT	rsv:5;//momi power safe
@@ -288,33 +231,10 @@ typedef struct PACKED {
 	USHORT	PlusHTC:1;	//+HTC control field support
 	USHORT	RDGSupport:1;	//reverse Direction Grant  support
 	USHORT	rsv2:4;
-#endif /* RT_BIG_ENDIAN */
 } EXT_HT_CAP_INFO, *PEXT_HT_CAP_INFO;
 
 //  HT Beamforming field in HT Cap IE .
 typedef struct PACKED _HT_BF_CAP{
-#ifdef RT_BIG_ENDIAN
-	ULONG	rsv:3;
-	ULONG	ChanEstimation:2;
-	ULONG	CSIRowBFSup:2;
-	ULONG	ComSteerBFAntSup:2;
-	ULONG	NoComSteerBFAntSup:2;
-	ULONG	CSIBFAntSup:2;
-	ULONG	MinGrouping:2;
-	ULONG	ExpComBF:2;
-	ULONG	ExpNoComBF:2;
-	ULONG	ExpCSIFbk:2;
-	ULONG	ExpComSteerCapable:1;
-	ULONG	ExpNoComSteerCapable:1;
-	ULONG	ExpCSICapable:1;
-	ULONG	Calibration:2;
-	ULONG	ImpTxBFCapable:1;
-	ULONG	TxNDPCapable:1;
-	ULONG	RxNDPCapable:1;
-	ULONG	TxSoundCapable:1;
-	ULONG	RxSoundCapable:1;
-	ULONG	TxBFRecCapable:1;
-#else
 	ULONG	TxBFRecCapable:1;
 	ULONG	RxSoundCapable:1;
 	ULONG	TxSoundCapable:1;
@@ -335,21 +255,10 @@ typedef struct PACKED _HT_BF_CAP{
 	ULONG	CSIRowBFSup:2;
 	ULONG	ChanEstimation:2;
 	ULONG	rsv:3;
-#endif // RT_BIG_ENDIAN //
 } HT_BF_CAP, *PHT_BF_CAP;
 
 //  HT antenna selection field in HT Cap IE .
 typedef struct PACKED _HT_AS_CAP{
-#ifdef RT_BIG_ENDIAN
-	UCHAR	rsv:1;
-	UCHAR	TxSoundPPDU:1;
-	UCHAR	RxASel:1;
-	UCHAR	AntIndFbk:1;
-	UCHAR	ExpCSIFbk:1;
-	UCHAR	AntIndFbkTxASEL:1;
-	UCHAR	ExpCSIFbkTxASEL:1;
-	UCHAR	AntSelect:1;
-#else
 	UCHAR	AntSelect:1;
 	UCHAR	ExpCSIFbkTxASEL:1;
 	UCHAR	AntIndFbkTxASEL:1;
@@ -358,7 +267,6 @@ typedef struct PACKED _HT_AS_CAP{
 	UCHAR	RxASel:1;
 	UCHAR	TxSoundPPDU:1;
 	UCHAR	rsv:1;
-#endif // RT_BIG_ENDIAN //
 } HT_AS_CAP, *PHT_AS_CAP;
 
 // Draft 1.0 set IE length 26, but is extensible..
@@ -402,17 +310,10 @@ typedef struct PACKED _OVERLAP_BSS_SCAN_IE{
 //  7.3.2.56. 20/40 Coexistence element used in  Element ID = 72 = IE_2040_BSS_COEXIST
 typedef union PACKED _BSS_2040_COEXIST_IE{
  struct PACKED {
- #ifdef RT_BIG_ENDIAN
-	UCHAR	rsv:5;
-	UCHAR	BSS20WidthReq:1;
-	UCHAR	Intolerant40:1;
-	UCHAR	InfoReq:1;
- #else
 	UCHAR	InfoReq:1;
 	UCHAR	Intolerant40:1;			// Inter-BSS. set 1 when prohibits a receiving BSS from operating as a 20/40 Mhz BSS.
 	UCHAR	BSS20WidthReq:1;		// Intra-BSS set 1 when prohibits a receiving AP from operating its BSS as a 20/40MHz BSS.
 	UCHAR	rsv:5;
-#endif // RT_BIG_ENDIAN //
     } field;
  UCHAR   word;
 } BSS_2040_COEXIST_IE, *PBSS_2040_COEXIST_IE;
@@ -438,17 +339,10 @@ typedef struct  _TRIGGER_EVENT_TAB{
 // 7.3.27 20/40 Bss Coexistence Mgmt capability used in extended capabilities information IE( ID = 127 = IE_EXT_CAPABILITY).
 //	This is the first octet and was defined in 802.11n D3.03 and 802.11yD9.0
 typedef struct PACKED _EXT_CAP_INFO_ELEMENT{
-#ifdef RT_BIG_ENDIAN
-	UCHAR	rsv2:5;
-	UCHAR	ExtendChannelSwitch:1;
-	UCHAR	rsv:1;
-	UCHAR	BssCoexistMgmtSupport:1;
-#else
 	UCHAR	BssCoexistMgmtSupport:1;
 	UCHAR	rsv:1;
 	UCHAR	ExtendChannelSwitch:1;
 	UCHAR	rsv2:5;
-#endif // RT_BIG_ENDIAN //
 }EXT_CAP_INFO_ELEMENT, *PEXT_CAP_INFO_ELEMENT;
 
 
@@ -494,18 +388,6 @@ typedef struct {
 //This structure substracts ralink supports from all 802.11n-related features.
 //Features not listed here but contained in 802.11n spec are not supported in rt2860.
 typedef struct {
-#ifdef RT_BIG_ENDIAN
-	USHORT	rsv:5;
-	USHORT	AmsduSize:1;	// Max receiving A-MSDU size
-	USHORT	AmsduEnable:1;	// Enable to transmit A-MSDU. Suggest disable. We should use A-MPDU to gain best benifit of 802.11n
-	USHORT	RxSTBC:2;	// 2 bits
-	USHORT	TxSTBC:1;
-	USHORT	ShortGIfor40:1;	//for40MHz
-	USHORT	ShortGIfor20:1;
-	USHORT	GF:1;	//green field
-	USHORT	MimoPs:2;//mimo power safe MMPS_
-	USHORT	ChannelWidth:1;
-#else
 	USHORT	ChannelWidth:1;
 	USHORT	MimoPs:2;//mimo power safe MMPS_
 	USHORT	GF:1;	//green field
@@ -516,34 +398,18 @@ typedef struct {
 	USHORT	AmsduEnable:1;	// Enable to transmit A-MSDU. Suggest disable. We should use A-MPDU to gain best benifit of 802.11n
 	USHORT	AmsduSize:1;	// Max receiving A-MSDU size
 	USHORT	rsv:5;
-#endif
 
 	//Substract from Addiont HT INFO IE
-#ifdef RT_BIG_ENDIAN
-	UCHAR	RecomWidth:1;
-	UCHAR	ExtChanOffset:2;	// Please not the difference with following 	UCHAR	NewExtChannelOffset; from 802.11n
-	UCHAR	MpduDensity:3;
-	UCHAR	MaxRAmpduFactor:2;
-#else
 	UCHAR	MaxRAmpduFactor:2;
 	UCHAR	MpduDensity:3;
 	UCHAR	ExtChanOffset:2;	// Please not the difference with following 	UCHAR	NewExtChannelOffset; from 802.11n
 	UCHAR	RecomWidth:1;
-#endif
 
-#ifdef RT_BIG_ENDIAN
-	USHORT	rsv2:11;
-	USHORT	OBSS_NonHTExist:1;
-	USHORT	rsv3:1;
-	USHORT	NonGfPresent:1;
-	USHORT	OperaionMode:2;
-#else
 	USHORT	OperaionMode:2;
 	USHORT	NonGfPresent:1;
 	USHORT	rsv3:1;
 	USHORT	OBSS_NonHTExist:1;
 	USHORT	rsv2:11;
-#endif
 
 	// New Extension Channel Offset IE
 	UCHAR	NewExtChannelOffset;
@@ -553,50 +419,24 @@ typedef struct {
 
 //   field in Addtional HT Information IE .
 typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-	UCHAR	SerInterGranu:3;
-	UCHAR	S_PSMPSup:1;
-	UCHAR	RifsMode:1;
-	UCHAR	RecomWidth:1;
-	UCHAR	ExtChanOffset:2;
-#else
 	UCHAR	ExtChanOffset:2;
 	UCHAR	RecomWidth:1;
 	UCHAR	RifsMode:1;
 	UCHAR	S_PSMPSup:1;	 //Indicate support for scheduled PSMP
 	UCHAR	SerInterGranu:3;	 //service interval granularity
-#endif
 } ADD_HTINFO, *PADD_HTINFO;
 
 typedef struct PACKED{
-#ifdef RT_BIG_ENDIAN
-	USHORT	rsv2:11;
-	USHORT	OBSS_NonHTExist:1;
-	USHORT	rsv:1;
-	USHORT	NonGfPresent:1;
-	USHORT	OperaionMode:2;
-#else
 	USHORT	OperaionMode:2;
 	USHORT	NonGfPresent:1;
 	USHORT	rsv:1;
 	USHORT	OBSS_NonHTExist:1;
 	USHORT	rsv2:11;
-#endif
 } ADD_HTINFO2, *PADD_HTINFO2;
 
 
 // TODO: Need sync with spec about the definition of StbcMcs. In Draft 3.03, it's reserved.
 typedef struct PACKED{
-#ifdef RT_BIG_ENDIAN
-	USHORT	rsv:4;
-	USHORT	PcoPhase:1;
-	USHORT	PcoActive:1;
-	USHORT	LsigTxopProt:1;
-	USHORT	STBCBeacon:1;
-	USHORT	DualCTSProtect:1;
-	USHORT	DualBeacon:1;
-	USHORT	StbcMcs:6;
-#else
 	USHORT	StbcMcs:6;
 	USHORT	DualBeacon:1;
 	USHORT	DualCTSProtect:1;
@@ -605,7 +445,6 @@ typedef struct PACKED{
 	USHORT	PcoActive:1;
 	USHORT	PcoPhase:1;
 	USHORT	rsv:4;
-#endif // RT_BIG_ENDIAN //
 } ADD_HTINFO3, *PADD_HTINFO3;
 
 #define SIZE_ADD_HT_INFO_IE		22
@@ -624,22 +463,6 @@ typedef struct  PACKED{
 
 // 4-byte HTC field.  maybe included in any frame except non-QOS data frame.  The Order bit must set 1.
 typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-    UINT32		RDG:1;	//RDG / More PPDU
-    UINT32		ACConstraint:1;	//feedback request
-    UINT32		rsv:5;  //calibration sequence
-    UINT32		ZLFAnnouce:1;	// ZLF announcement
-    UINT32		CSISTEERING:2;	//CSI/ STEERING
-    UINT32		FBKReq:2;	//feedback request
-    UINT32		CalSeq:2;  //calibration sequence
-    UINT32		CalPos:2;	// calibration position
-    UINT32		MFBorASC:7;	//Link adaptation feedback containing recommended MCS. 0x7f for no feedback or not available
-    UINT32		MFS:3;	//SET to the received value of MRS. 0x111 for unsolicited MFB.
-    UINT32		MRSorASI:3;	// MRQ Sequence identifier. unchanged during entire procedure. 0x000-0x110.
-    UINT32		MRQ:1;	//MCS feedback. Request for a MCS feedback
-    UINT32		TRQ:1;	//sounding request
-    UINT32		MA:1;	//management action payload exist in (QoS Null+HTC)
-#else
     UINT32		MA:1;	//management action payload exist in (QoS Null+HTC)
     UINT32		TRQ:1;	//sounding request
     UINT32		MRQ:1;	//MCS feedback. Request for a MCS feedback
@@ -654,41 +477,19 @@ typedef struct PACKED {
     UINT32		rsv:5;  //calibration sequence
     UINT32		ACConstraint:1;	//feedback request
     UINT32		RDG:1;	//RDG / More PPDU
-#endif /* !RT_BIG_ENDIAN */
 } HT_CONTROL, *PHT_CONTROL;
 
 // 2-byte QOS CONTROL field
 typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-    USHORT      Txop_QueueSize:8;
-    USHORT      AMsduPresent:1;
-    USHORT      AckPolicy:2;  //0: normal ACK 1:No ACK 2:scheduled under MTBA/PSMP  3: BA
-    USHORT      EOSP:1;
-    USHORT      TID:4;
-#else
     USHORT      TID:4;
     USHORT      EOSP:1;
     USHORT      AckPolicy:2;  //0: normal ACK 1:No ACK 2:scheduled under MTBA/PSMP  3: BA
     USHORT      AMsduPresent:1;
     USHORT      Txop_QueueSize:8;
-#endif /* !RT_BIG_ENDIAN */
 } QOS_CONTROL, *PQOS_CONTROL;
 
 // 2-byte Frame control field
 typedef	struct	PACKED {
-#ifdef RT_BIG_ENDIAN
-	USHORT		Order:1;			// Strict order expected
-	USHORT		Wep:1;				// Wep data
-	USHORT		MoreData:1;			// More data bit
-	USHORT		PwrMgmt:1;			// Power management bit
-	USHORT		Retry:1;			// Retry status bit
-	USHORT		MoreFrag:1;			// More fragment bit
-	USHORT		FrDs:1;				// From DS indication
-	USHORT		ToDs:1;				// To DS indication
-	USHORT		SubType:4;			// MSDU subtype
-	USHORT		Type:2;				// MSDU type
-	USHORT		Ver:2;				// Protocol version
-#else
 	USHORT		Ver:2;				// Protocol version
 	USHORT		Type:2;				// MSDU type
 	USHORT		SubType:4;			// MSDU subtype
@@ -700,7 +501,6 @@ typedef	struct	PACKED {
 	USHORT		MoreData:1;			// More data bit
 	USHORT		Wep:1;				// Wep data
 	USHORT		Order:1;			// Strict order expected
-#endif /* !RT_BIG_ENDIAN */
 } FRAME_CONTROL, *PFRAME_CONTROL;
 
 typedef	struct	PACKED _HEADER_802_11	{
@@ -709,13 +509,8 @@ typedef	struct	PACKED _HEADER_802_11	{
     UCHAR           Addr1[MAC_ADDR_LEN];
     UCHAR           Addr2[MAC_ADDR_LEN];
 	UCHAR			Addr3[MAC_ADDR_LEN];
-#ifdef RT_BIG_ENDIAN
-	USHORT			Sequence:12;
-	USHORT			Frag:4;
-#else
 	USHORT			Frag:4;
 	USHORT			Sequence:12;
-#endif /* !RT_BIG_ENDIAN */
 	UCHAR			Octet[0];
 }	HEADER_802_11, *PHEADER_802_11;
 
@@ -739,42 +534,24 @@ typedef	struct	PACKED _HEADER_802_3	{
 ////Block ACK related format
 // 2-byte BA Parameter  field  in 	DELBA frames to terminate an already set up bA
 typedef struct PACKED{
-#ifdef RT_BIG_ENDIAN
-    USHORT      TID:4;	// value of TC os TS
-    USHORT      Initiator:1;	// 1: originator    0:recipient
-    USHORT      Rsv:11;	// always set to 0
-#else
     USHORT      Rsv:11;	// always set to 0
     USHORT      Initiator:1;	// 1: originator    0:recipient
     USHORT      TID:4;	// value of TC os TS
-#endif /* !RT_BIG_ENDIAN */
 } DELBA_PARM, *PDELBA_PARM;
 
 // 2-byte BA Parameter Set field  in ADDBA frames to signal parm for setting up a BA
 typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-    USHORT      BufSize:10;	// number of buffe of size 2304 octetsr
-    USHORT      TID:4;	// value of TC os TS
-    USHORT      BAPolicy:1;	// 1: immediately BA    0:delayed BA
-    USHORT      AMSDUSupported:1;	// 0: not permitted		1: permitted
-#else
     USHORT      AMSDUSupported:1;	// 0: not permitted		1: permitted
     USHORT      BAPolicy:1;	// 1: immediately BA    0:delayed BA
     USHORT      TID:4;	// value of TC os TS
     USHORT      BufSize:10;	// number of buffe of size 2304 octetsr
-#endif /* !RT_BIG_ENDIAN */
 } BA_PARM, *PBA_PARM;
 
 // 2-byte BA Starting Seq CONTROL field
 typedef union PACKED {
     struct PACKED {
-#ifdef RT_BIG_ENDIAN
-    USHORT      StartSeq:12;   // sequence number of the 1st MSDU for which this BAR is sent
-	USHORT      FragNum:4;	// always set to 0
-#else
     USHORT      FragNum:4;	// always set to 0
 	USHORT      StartSeq:12;   // sequence number of the 1st MSDU for which this BAR is sent
-#endif /* RT_BIG_ENDIAN */
     }   field;
     USHORT           word;
 } BASEQ_CONTROL, *PBASEQ_CONTROL;
@@ -782,63 +559,34 @@ typedef union PACKED {
 //BAControl and BARControl are the same
 // 2-byte BA CONTROL field in BA frame
 typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-    USHORT      TID:4;
-    USHORT      Rsv:9;
-    USHORT      Compressed:1;
-    USHORT      MTID:1;		//EWC V1.24
-    USHORT      ACKPolicy:1; // only related to N-Delayed BA. But not support in RT2860b. 0:NormalACK  1:No ACK
-#else
     USHORT      ACKPolicy:1; // only related to N-Delayed BA. But not support in RT2860b. 0:NormalACK  1:No ACK
     USHORT      MTID:1;		//EWC V1.24
     USHORT      Compressed:1;
     USHORT      Rsv:9;
     USHORT      TID:4;
-#endif /* !RT_BIG_ENDIAN */
 } BA_CONTROL, *PBA_CONTROL;
 
 // 2-byte BAR CONTROL field in BAR frame
 typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-    USHORT      TID:4;
-    USHORT      Rsv1:9;
-    USHORT      Compressed:1;
-    USHORT      MTID:1;		//if this bit1, use  FRAME_MTBA_REQ,  if 0, use FRAME_BA_REQ
-    USHORT      ACKPolicy:1;
-#else
     USHORT      ACKPolicy:1; // 0:normal ack,  1:no ack.
     USHORT      MTID:1;		//if this bit1, use  FRAME_MTBA_REQ,  if 0, use FRAME_BA_REQ
     USHORT      Compressed:1;
     USHORT      Rsv1:9;
     USHORT      TID:4;
-#endif /* !RT_BIG_ENDIAN */
 } BAR_CONTROL, *PBAR_CONTROL;
 
 // BARControl in MTBAR frame
 typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-    USHORT      NumTID:4;
-    USHORT      Rsv1:9;
-    USHORT      Compressed:1;
-    USHORT      MTID:1;
-    USHORT      ACKPolicy:1;
-#else
     USHORT      ACKPolicy:1;
     USHORT      MTID:1;
     USHORT      Compressed:1;
     USHORT      Rsv1:9;
     USHORT      NumTID:4;
-#endif /* !RT_BIG_ENDIAN */
 } MTBAR_CONTROL, *PMTBAR_CONTROL;
 
 typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-    USHORT      TID:4;
-    USHORT      Rsv1:12;
-#else
     USHORT      Rsv1:12;
     USHORT      TID:4;
-#endif /* !RT_BIG_ENDIAN */
 } PER_TID_INFO, *PPER_TID_INFO;
 
 typedef struct {
@@ -1058,15 +806,6 @@ typedef struct {
 
 // QBSS Info field in QSTA's assoc req
 typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-	UCHAR		Rsv2:1;
-	UCHAR		MaxSPLength:2;
-	UCHAR		Rsv1:1;
-	UCHAR		UAPSD_AC_BE:1;
-	UCHAR		UAPSD_AC_BK:1;
-	UCHAR		UAPSD_AC_VI:1;
-	UCHAR		UAPSD_AC_VO:1;
-#else
     UCHAR		UAPSD_AC_VO:1;
 	UCHAR		UAPSD_AC_VI:1;
 	UCHAR		UAPSD_AC_BK:1;
@@ -1074,20 +813,13 @@ typedef struct PACKED {
 	UCHAR		Rsv1:1;
 	UCHAR		MaxSPLength:2;
 	UCHAR		Rsv2:1;
-#endif /* !RT_BIG_ENDIAN */
 } QBSS_STA_INFO_PARM, *PQBSS_STA_INFO_PARM;
 
 // QBSS Info field in QAP's Beacon/ProbeRsp
 typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-	UCHAR		UAPSD:1;
-	UCHAR		Rsv:3;
-    UCHAR		ParamSetCount:4;
-#else
     UCHAR		ParamSetCount:4;
 	UCHAR		Rsv:3;
 	UCHAR		UAPSD:1;
-#endif /* !RT_BIG_ENDIAN */
 } QBSS_AP_INFO_PARM, *PQBSS_AP_INFO_PARM;
 
 // QOS Capability reported in QAP's BEACON/ProbeRsp
@@ -1101,13 +833,10 @@ typedef struct {
     UCHAR       EdcaUpdateCount;
 } QOS_CAPABILITY_PARM, *PQOS_CAPABILITY_PARM;
 
-#ifdef CONFIG_STA_SUPPORT
 typedef struct {
     UCHAR       IELen;
     UCHAR       IE[MAX_CUSTOM_LEN];
 } WPA_IE_;
-#endif // CONFIG_STA_SUPPORT //
-
 
 typedef struct {
     UCHAR   Bssid[MAC_ADDR_LEN];
@@ -1167,14 +896,8 @@ typedef struct {
 	EDCA_PARM           EdcaParm;
 	QOS_CAPABILITY_PARM QosCapability;
 	QBSS_LOAD_PARM      QbssLoad;
-#ifdef CONFIG_STA_SUPPORT
     WPA_IE_     WpaIE;
     WPA_IE_     RsnIE;
-#ifdef EXT_BUILD_CHANNEL_LIST
-	UCHAR		CountryString[3];
-	BOOLEAN		bHasCountryIE;
-#endif // EXT_BUILD_CHANNEL_LIST //
-#endif // CONFIG_STA_SUPPORT //
 } BSS_ENTRY, *PBSS_ENTRY;
 
 typedef struct {
@@ -1333,29 +1056,6 @@ typedef struct _MLME_START_REQ_STRUCT {
     UCHAR       SsidLen;
 } MLME_START_REQ_STRUCT, *PMLME_START_REQ_STRUCT;
 
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-// structure for DLS
-typedef struct _RT_802_11_DLS {
-	USHORT						TimeOut;		// Use to time out while slience, unit: second , set by UI
-	USHORT						CountDownTimer;	// Use to time out while slience,unit: second , used by driver only
-	NDIS_802_11_MAC_ADDRESS		MacAddr;		// set by UI
-	UCHAR						Status;			// 0: none , 1: wait STAkey, 2: finish DLS setup , set by driver only
-	BOOLEAN						Valid;			// 1: valid , 0: invalid , set by UI, use to setup or tear down DLS link
-	RALINK_TIMER_STRUCT			Timer;			// Use to time out while handshake
-	USHORT						Sequence;
-	USHORT						MacTabMatchWCID;	// ASIC
-	BOOLEAN						bHTCap;
-	PVOID						pAd;
-} RT_802_11_DLS, *PRT_802_11_DLS;
-
-typedef struct _MLME_DLS_REQ_STRUCT {
-    PRT_802_11_DLS	pDLS;
-    USHORT			Reason;
-} MLME_DLS_REQ_STRUCT, *PMLME_DLS_REQ_STRUCT;
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
 typedef struct PACKED {
     UCHAR   Eid;
     UCHAR   Len;
@@ -1365,21 +1065,12 @@ typedef struct PACKED {
 typedef struct PACKED _RTMP_TX_RATE_SWITCH
 {
 	UCHAR   ItemNo;
-#ifdef RT_BIG_ENDIAN
-	UCHAR	Rsv2:2;
-	UCHAR	Mode:2;
-	UCHAR	Rsv1:1;
-	UCHAR	BW:1;
-	UCHAR	ShortGI:1;
-	UCHAR	STBC:1;
-#else
 	UCHAR	STBC:1;
 	UCHAR	ShortGI:1;
 	UCHAR	BW:1;
 	UCHAR	Rsv1:1;
 	UCHAR	Mode:2;
 	UCHAR	Rsv2:2;
-#endif
 	UCHAR   CurrMCS;
 	UCHAR   TrainUp;
 	UCHAR   TrainDown;
diff --git a/drivers/staging/rt2860/oid.h b/drivers/staging/rt2860/oid.h
index 5e6ed9f62f9..8519afccd97 100644
--- a/drivers/staging/rt2860/oid.h
+++ b/drivers/staging/rt2860/oid.h
@@ -80,13 +80,8 @@
 #define MAX_LENGTH_OF_SUPPORT_RATES		12    // 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
 #define MAX_NUMBER_OF_DLS_ENTRY			4
 
-#ifndef UNDER_CE
-
 #define OID_GEN_MACHINE_NAME               0x0001021A
 
-#ifdef RALINK_ATE
-#define RT_QUERY_ATE_TXDONE_COUNT			0x0401
-#endif // RALINK_ATE //
 #define RT_QUERY_SIGNAL_CONTEXT				0x0402
 #define RT_SET_IAPP_PID                 	0x0404
 #define RT_SET_APD_PID						0x0405
@@ -163,7 +158,7 @@
 #define	RT_OID_802_11_QUERY_LAST_RX_RATE			0x0613
 #define	RT_OID_802_11_TX_POWER_LEVEL_1				0x0614
 #define	RT_OID_802_11_QUERY_PIDVID					0x0615
-//for WPA_SUPPLICANT_SUPPORT
+
 #define OID_SET_COUNTERMEASURES                     0x0616
 #define OID_802_11_SET_IEEE8021X                    0x0617
 #define OID_802_11_SET_IEEE8021X_REQUIRE_KEY        0x0618
@@ -388,9 +383,6 @@ typedef struct PACKED _RADIUS_CONF
 	RADIUS_KEY_INFO	RadiusInfo[8/*MAX_MBSSID_NUM*/];
 } RADIUS_CONF, *PRADIUS_CONF;
 
-
-
-#ifdef CONFIG_STA_SUPPORT
 // Key mapping keys require a BSSID
 typedef struct _NDIS_802_11_KEY
 {
@@ -401,7 +393,6 @@ typedef struct _NDIS_802_11_KEY
     NDIS_802_11_KEY_RSC KeyRSC;
     UCHAR           KeyMaterial[1];     // variable length depending on above field
 } NDIS_802_11_KEY, *PNDIS_802_11_KEY;
-#endif // CONFIG_STA_SUPPORT //
 
 typedef struct _NDIS_802_11_REMOVE_KEY
 {
@@ -544,8 +535,10 @@ typedef enum _NDIS_802_11_WEP_STATUS
     Ndis802_11Encryption3KeyAbsent,
     Ndis802_11Encryption4Enabled,	// TKIP or AES mix
     Ndis802_11Encryption4KeyAbsent,
+#ifndef RT30xx
     Ndis802_11GroupWEP40Enabled,
 	Ndis802_11GroupWEP104Enabled,
+#endif
 } NDIS_802_11_WEP_STATUS, *PNDIS_802_11_WEP_STATUS,
   NDIS_802_11_ENCRYPTION_STATUS, *PNDIS_802_11_ENCRYPTION_STATUS;
 
@@ -605,7 +598,6 @@ typedef enum _NDIS_802_11_MEDIA_STREAM_MODE
 // PMKID Structures
 typedef UCHAR   NDIS_802_11_PMKID_VALUE[16];
 
-#ifdef CONFIG_STA_SUPPORT
 typedef struct _BSSID_INFO
 {
     NDIS_802_11_MAC_ADDRESS BSSID;
@@ -618,8 +610,6 @@ typedef struct _NDIS_802_11_PMKID
     UINT    BSSIDInfoCount;
     BSSID_INFO BSSIDInfo[1];
 } NDIS_802_11_PMKID, *PNDIS_802_11_PMKID;
-#endif // CONFIG_STA_SUPPORT //
-
 
 typedef struct _NDIS_802_11_AUTHENTICATION_ENCRYPTION
 {
@@ -636,9 +626,6 @@ typedef struct _NDIS_802_11_CAPABILITY
      NDIS_802_11_AUTHENTICATION_ENCRYPTION AuthenticationEncryptionSupported[1];
 } NDIS_802_11_CAPABILITY, *PNDIS_802_11_CAPABILITY;
 
-//#endif //of WIN 2k
-#endif //UNDER_CE
-
 #if WIRELESS_EXT <= 11
 #ifndef SIOCDEVPRIVATE
 #define SIOCDEVPRIVATE                              0x8BE0
@@ -646,21 +633,20 @@ typedef struct _NDIS_802_11_CAPABILITY
 #define SIOCIWFIRSTPRIV								SIOCDEVPRIVATE
 #endif
 
-#ifdef CONFIG_STA_SUPPORT
+#ifdef RT30xx
+#define RT_PRIV_IOCTL_EXT							(SIOCIWFIRSTPRIV + 0x01) // Sync. with AP for wsc upnp daemon
+#endif
 #define RTPRIV_IOCTL_SET							(SIOCIWFIRSTPRIV + 0x02)
 
 #ifdef DBG
 #define RTPRIV_IOCTL_BBP                            (SIOCIWFIRSTPRIV + 0x03)
 #define RTPRIV_IOCTL_MAC                            (SIOCIWFIRSTPRIV + 0x05)
+#ifdef RT30xx
+#define RTPRIV_IOCTL_RF                             (SIOCIWFIRSTPRIV + 0x13)
+#endif
 #define RTPRIV_IOCTL_E2P                            (SIOCIWFIRSTPRIV + 0x07)
 #endif
 
-#ifdef RALINK_ATE
-#ifdef RALINK_28xx_QA
-#define RTPRIV_IOCTL_ATE							(SIOCIWFIRSTPRIV + 0x08)
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
 #define RTPRIV_IOCTL_STATISTICS                     (SIOCIWFIRSTPRIV + 0x09)
 #define RTPRIV_IOCTL_ADD_PMKID_CACHE                (SIOCIWFIRSTPRIV + 0x0A)
 #define RTPRIV_IOCTL_RADIUS_DATA                    (SIOCIWFIRSTPRIV + 0x0C)
@@ -674,67 +660,61 @@ enum {
     SHOW_DRVIER_VERION = 5,
     SHOW_BA_INFO = 6,
 	SHOW_DESC_INFO = 7,
+#ifdef RT2870
+	SHOW_RXBULK_INFO = 8,
+	SHOW_TXBULK_INFO = 9,
+#endif // RT2870 //
     RAIO_OFF = 10,
     RAIO_ON = 11,
-#ifdef QOS_DLS_SUPPORT
-	SHOW_DLS_ENTRY_INFO = 19,
-#endif // QOS_DLS_SUPPORT //
 	SHOW_CFG_VALUE = 20,
+#if !defined(RT2860) && !defined(RT30xx)
+	SHOW_ADHOC_ENTRY_INFO = 21,
+#endif
 };
 
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef SNMP_SUPPORT
-//SNMP ieee 802dot11, kathy , 2008_0220
-// dot11res(3)
-#define RT_OID_802_11_MANUFACTUREROUI			0x0700
-#define RT_OID_802_11_MANUFACTURERNAME			0x0701
-#define RT_OID_802_11_RESOURCETYPEIDNAME		0x0702
-
-// dot11smt(1)
-#define RT_OID_802_11_PRIVACYOPTIONIMPLEMENTED	0x0703
-#define RT_OID_802_11_POWERMANAGEMENTMODE		0x0704
-#define OID_802_11_WEPDEFAULTKEYVALUE			0x0705 // read , write
-#define OID_802_11_WEPDEFAULTKEYID				0x0706
-#define RT_OID_802_11_WEPKEYMAPPINGLENGTH		0x0707
-#define OID_802_11_SHORTRETRYLIMIT				0x0708
-#define OID_802_11_LONGRETRYLIMIT				0x0709
-#define RT_OID_802_11_PRODUCTID					0x0710
-#define RT_OID_802_11_MANUFACTUREID				0x0711
-
-// //dot11Phy(4)
-#define OID_802_11_CURRENTCHANNEL				0x0712
-
-//dot11mac
-#define RT_OID_802_11_MAC_ADDRESS				0x0713
-#endif // SNMP_SUPPORT //
-
 #define OID_802_11_BUILD_CHANNEL_EX				0x0714
 #define OID_802_11_GET_CH_LIST					0x0715
 #define OID_802_11_GET_COUNTRY_CODE				0x0716
 #define OID_802_11_GET_CHANNEL_GEOGRAPHY		0x0717
 
+#ifdef RT30xx
+#define RT_OID_WSC_SET_PASSPHRASE                   0x0740 // passphrase for wpa(2)-psk
+#define RT_OID_WSC_DRIVER_AUTO_CONNECT              0x0741
+#define RT_OID_WSC_QUERY_DEFAULT_PROFILE            0x0742
+#define RT_OID_WSC_SET_CONN_BY_PROFILE_INDEX        0x0743
+#define RT_OID_WSC_SET_ACTION                       0x0744
+#define RT_OID_WSC_SET_SSID                         0x0745
+#define RT_OID_WSC_SET_PIN_CODE                     0x0746
+#define RT_OID_WSC_SET_MODE                         0x0747 // PIN or PBC
+#define RT_OID_WSC_SET_CONF_MODE                    0x0748 // Enrollee or Registrar
+#define RT_OID_WSC_SET_PROFILE                      0x0749
+
+#define RT_OID_802_11_WSC_QUERY_PROFILE				0x0750
+// for consistency with RT61
+#define RT_OID_WSC_QUERY_STATUS						0x0751
+#define RT_OID_WSC_PIN_CODE							0x0752
+#define RT_OID_WSC_UUID								0x0753
+#define RT_OID_WSC_SET_SELECTED_REGISTRAR			0x0754
+#define RT_OID_WSC_EAPMSG							0x0755
+#define RT_OID_WSC_MANUFACTURER						0x0756
+#define RT_OID_WSC_MODEL_NAME						0x0757
+#define RT_OID_WSC_MODEL_NO							0x0758
+#define RT_OID_WSC_SERIAL_NO						0x0759
+#define RT_OID_WSC_MAC_ADDRESS						0x0760
+#endif
+
 #ifdef LLTD_SUPPORT
 // for consistency with RT61
 #define RT_OID_GET_PHY_MODE                         0x761
 #endif // LLTD_SUPPORT //
 
+#if defined(RT2860) || defined(RT30xx)
 // New for MeetingHouse Api support
 #define OID_MH_802_1X_SUPPORTED               0xFFEDC100
+#endif
 
 // MIMO Tx parameter, ShortGI, MCS, STBC, etc.  these are fields in TXWI. Don't change this definition!!!
 typedef union  _HTTRANSMIT_SETTING {
-#ifdef RT_BIG_ENDIAN
-	struct	{
-	USHORT		MODE:2;	// Use definition MODE_xxx.
-	USHORT		TxBF:1;
-	USHORT		rsv:2;
-	USHORT		STBC:2;	//SPACE
-	USHORT		ShortGI:1;
-	USHORT		BW:1;	//channel bandwidth 20MHz or 40 MHz
-	USHORT   	MCS:7;                 // MCS
-	}	field;
-#else
 	struct	{
 	USHORT   	MCS:7;                 // MCS
 	USHORT		BW:1;	//channel bandwidth 20MHz or 40 MHz
@@ -744,7 +724,6 @@ typedef union  _HTTRANSMIT_SETTING {
 	USHORT		TxBF:1;
 	USHORT		MODE:2;	// Use definition MODE_xxx.
 	}	field;
-#endif
 	USHORT		word;
  } HTTRANSMIT_SETTING, *PHTTRANSMIT_SETTING;
 
@@ -755,14 +734,12 @@ typedef enum _RT_802_11_PREAMBLE {
 } RT_802_11_PREAMBLE, *PRT_802_11_PREAMBLE;
 
 // Only for STA, need to sync with AP
-// 2005-03-08 match current RaConfig.
 typedef enum _RT_802_11_PHY_MODE {
 	PHY_11BG_MIXED = 0,
 	PHY_11B,
 	PHY_11A,
 	PHY_11ABG_MIXED,
 	PHY_11G,
-#ifdef DOT11_N_SUPPORT
 	PHY_11ABGN_MIXED,	// both band   5
 	PHY_11N_2_4G,		// 11n-only with 2.4G band   	6
 	PHY_11GN_MIXED,	// 2.4G band      7
@@ -770,7 +747,6 @@ typedef enum _RT_802_11_PHY_MODE {
 	PHY_11BGN_MIXED,	// if check 802.11b.      9
 	PHY_11AGN_MIXED,	// if check 802.11b.      10
 	PHY_11N_5G,			// 11n-only with 5G band		11
-#endif // DOT11_N_SUPPORT //
 } RT_802_11_PHY_MODE;
 
 // put all proprietery for-query objects here to reduce # of Query_OID
@@ -937,54 +913,14 @@ typedef struct _RT_LLTD_ASSOICATION_TABLE {
 } RT_LLTD_ASSOICATION_TABLE, *PRT_LLTD_ASSOICATION_TABLE;
 #endif // LLTD_SUPPORT //
 
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-//rt2860, kathy 2007-0118
-// structure for DLS
-typedef struct _RT_802_11_DLS_UI {
-	USHORT						TimeOut;		// unit: second , set by UI
-	USHORT						CountDownTimer;	// unit: second , used by driver only
-	NDIS_802_11_MAC_ADDRESS		MacAddr;		// set by UI
-	UCHAR						Status;			// 0: none , 1: wait STAkey, 2: finish DLS setup , set by driver only
-	BOOLEAN						Valid;			// 1: valid , 0: invalid , set by UI, use to setup or tear down DLS link
-} RT_802_11_DLS_UI, *PRT_802_11_DLS_UI;
-
-typedef struct _RT_802_11_DLS_INFO {
-	RT_802_11_DLS_UI	Entry[MAX_NUMBER_OF_DLS_ENTRY];
-	UCHAR				num;
-} RT_802_11_DLS_INFO, *PRT_802_11_DLS_INFO;
-
-typedef enum _RT_802_11_DLS_MODE {
-    DLS_NONE,
-    DLS_WAIT_KEY,
-    DLS_FINISH
-} RT_802_11_DLS_MODE;
-#endif // QOS_DLS_SUPPORT //
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-#define	RT_ASSOC_EVENT_FLAG                         0x0101
-#define	RT_DISASSOC_EVENT_FLAG                      0x0102
-#define	RT_REQIE_EVENT_FLAG                         0x0103
-#define	RT_RESPIE_EVENT_FLAG                        0x0104
-#define	RT_ASSOCINFO_EVENT_FLAG                     0x0105
-#define RT_PMKIDCAND_FLAG                           0x0106
-#define RT_INTERFACE_DOWN                           0x0107
-#define RT_INTERFACE_UP                             0x0108
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
 #define MAX_CUSTOM_LEN 128
 
-#ifdef CONFIG_STA_SUPPORT
 typedef enum _RT_802_11_D_CLIENT_MODE
 {
    Rt802_11_D_None,
    Rt802_11_D_Flexible,
    Rt802_11_D_Strict,
 } RT_802_11_D_CLIENT_MODE, *PRT_802_11_D_CLIENT_MODE;
-#endif // CONFIG_STA_SUPPORT //
 
 typedef struct _RT_CHANNEL_LIST_INFO
 {
@@ -992,6 +928,27 @@ typedef struct _RT_CHANNEL_LIST_INFO
 	UCHAR ChannelListNum; // number of channel in ChannelList[]
 } RT_CHANNEL_LIST_INFO, *PRT_CHANNEL_LIST_INFO;
 
+#ifdef RT2870
+// WSC configured credential
+typedef	struct	_WSC_CREDENTIAL
+{
+	NDIS_802_11_SSID	SSID;				// mandatory
+	USHORT				AuthType;			// mandatory, 1: open, 2: wpa-psk, 4: shared, 8:wpa, 0x10: wpa2, 0x20: wpa2-psk
+	USHORT				EncrType;			// mandatory, 1: none, 2: wep, 4: tkip, 8: aes
+	UCHAR				Key[64];			// mandatory, Maximum 64 byte
+	USHORT				KeyLength;
+	UCHAR				MacAddr[6];			// mandatory, AP MAC address
+	UCHAR				KeyIndex;			// optional, default is 1
+	UCHAR				Rsvd[3];			// Make alignment
+}	WSC_CREDENTIAL, *PWSC_CREDENTIAL;
+
+// WSC configured profiles
+typedef	struct	_WSC_PROFILE
+{
+	UINT			ProfileCnt;
+	WSC_CREDENTIAL	Profile[8];				// Support up to 8 profiles
+}	WSC_PROFILE, *PWSC_PROFILE;
+#endif
 
 #endif // _OID_H_
 
diff --git a/drivers/staging/rt2860/rt28xx.h b/drivers/staging/rt2860/rt28xx.h
index e5e6f0a8de6..6e71acb16dc 100644
--- a/drivers/staging/rt2860/rt28xx.h
+++ b/drivers/staging/rt2860/rt28xx.h
@@ -47,6 +47,15 @@
 #define PCI_EECTRL			0x0004
 #define PCI_MCUCTRL			0x0008
 
+#ifdef RT30xx
+#define	OPT_14			0x114
+
+typedef int				NTSTATUS;
+#define	RETRY_LIMIT             10
+#define STATUS_SUCCESS				0x00
+#define STATUS_UNSUCCESSFUL 		0x01
+#endif
+
 //
 // SCH/DMA registers - base address 0x0200
 //
@@ -54,32 +63,6 @@
 //
 #define DMA_CSR0      0x200
 #define INT_SOURCE_CSR      0x200
-#ifdef RT_BIG_ENDIAN
-typedef	union	_INT_SOURCE_CSR_STRUC	{
-	struct	{
-		UINT32       	:14;
-		UINT32       	TxCoherent:1;
-		UINT32       	RxCoherent:1;
-		UINT32       	GPTimer:1;
-		UINT32       	AutoWakeup:1;//bit14
-		UINT32       	TXFifoStatusInt:1;//FIFO Statistics is full, sw should read 0x171c
-		UINT32       	PreTBTT:1;
-		UINT32       	TBTTInt:1;
-		UINT32       	RxTxCoherent:1;
-		UINT32       	MCUCommandINT:1;
-		UINT32       	MgmtDmaDone:1;
-		UINT32       	HccaDmaDone:1;
-		UINT32       	Ac3DmaDone:1;
-		UINT32       	Ac2DmaDone:1;
-		UINT32       	Ac1DmaDone:1;
-		UINT32		Ac0DmaDone:1;
-		UINT32		RxDone:1;
-		UINT32		TxDelayINT:1;	//delayed interrupt, not interrupt until several int or time limit hit
-		UINT32		RxDelayINT:1; //dealyed interrupt
-	}	field;
-	UINT32			word;
-}	INT_SOURCE_CSR_STRUC, *PINT_SOURCE_CSR_STRUC;
-#else
 typedef	union	_INT_SOURCE_CSR_STRUC	{
 	struct	{
 		UINT32		RxDelayINT:1;
@@ -104,32 +87,11 @@ typedef	union	_INT_SOURCE_CSR_STRUC	{
 	}	field;
 	UINT32			word;
 } INT_SOURCE_CSR_STRUC, *PINT_SOURCE_CSR_STRUC;
-#endif
 
 //
 // INT_MASK_CSR:   Interrupt MASK register.   1: the interrupt is mask OFF
 //
 #define INT_MASK_CSR        0x204
-#ifdef RT_BIG_ENDIAN
-typedef	union	_INT_MASK_CSR_STRUC	{
-	struct	{
-		UINT32       	TxCoherent:1;
-		UINT32       	RxCoherent:1;
-		UINT32       	:20;
-		UINT32       	MCUCommandINT:1;
-		UINT32       	MgmtDmaDone:1;
-		UINT32       	HccaDmaDone:1;
-		UINT32       	Ac3DmaDone:1;
-		UINT32       	Ac2DmaDone:1;
-		UINT32       	Ac1DmaDone:1;
-		UINT32		Ac0DmaDone:1;
-		UINT32		RxDone:1;
-		UINT32		TxDelay:1;
-		UINT32		RXDelay_INT_MSK:1;
-	}	field;
-	UINT32			word;
-}INT_MASK_CSR_STRUC, *PINT_MASK_CSR_STRUC;
-#else
 typedef	union	_INT_MASK_CSR_STRUC	{
 	struct	{
 		UINT32		RXDelay_INT_MSK:1;
@@ -148,24 +110,8 @@ typedef	union	_INT_MASK_CSR_STRUC	{
 	}	field;
 	UINT32			word;
 } INT_MASK_CSR_STRUC, *PINT_MASK_CSR_STRUC;
-#endif
+
 #define WPDMA_GLO_CFG 	0x208
-#ifdef RT_BIG_ENDIAN
-typedef	union	_WPDMA_GLO_CFG_STRUC	{
-	struct	{
-		UINT32       	HDR_SEG_LEN:16;
-		UINT32       	RXHdrScater:8;
-		UINT32       	BigEndian:1;
-		UINT32       	EnTXWriteBackDDONE:1;
-		UINT32       	WPDMABurstSIZE:2;
-		UINT32		RxDMABusy:1;
-		UINT32		EnableRxDMA:1;
-		UINT32		TxDMABusy:1;
-		UINT32		EnableTxDMA:1;
-	}	field;
-	UINT32			word;
-}WPDMA_GLO_CFG_STRUC, *PWPDMA_GLO_CFG_STRUC;
-#else
 typedef	union	_WPDMA_GLO_CFG_STRUC	{
 	struct	{
 		UINT32		EnableTxDMA:1;
@@ -180,24 +126,8 @@ typedef	union	_WPDMA_GLO_CFG_STRUC	{
 	}	field;
 	UINT32			word;
 } WPDMA_GLO_CFG_STRUC, *PWPDMA_GLO_CFG_STRUC;
-#endif
+
 #define WPDMA_RST_IDX 	0x20c
-#ifdef RT_BIG_ENDIAN
-typedef	union	_WPDMA_RST_IDX_STRUC	{
-	struct	{
-		UINT32       	:15;
-		UINT32       	RST_DRX_IDX0:1;
-		UINT32       	rsv:10;
-		UINT32       	RST_DTX_IDX5:1;
-		UINT32       	RST_DTX_IDX4:1;
-		UINT32		RST_DTX_IDX3:1;
-		UINT32		RST_DTX_IDX2:1;
-		UINT32		RST_DTX_IDX1:1;
-		UINT32		RST_DTX_IDX0:1;
-	}	field;
-	UINT32			word;
-}WPDMA_RST_IDX_STRUC, *PWPDMA_RST_IDX_STRUC;
-#else
 typedef	union	_WPDMA_RST_IDX_STRUC	{
 	struct	{
 		UINT32		RST_DTX_IDX0:1;
@@ -212,21 +142,8 @@ typedef	union	_WPDMA_RST_IDX_STRUC	{
 	}	field;
 	UINT32			word;
 } WPDMA_RST_IDX_STRUC, *PWPDMA_RST_IDX_STRUC;
-#endif
+
 #define DELAY_INT_CFG  0x0210
-#ifdef RT_BIG_ENDIAN
-typedef	union	_DELAY_INT_CFG_STRUC	{
-	struct	{
-		UINT32       	TXDLY_INT_EN:1;
-		UINT32       	TXMAX_PINT:7;
-		UINT32       	TXMAX_PTIME:8;
-		UINT32       	RXDLY_INT_EN:1;
-		UINT32       	RXMAX_PINT:7;
-		UINT32		RXMAX_PTIME:8;
-	}	field;
-	UINT32			word;
-}DELAY_INT_CFG_STRUC, *PDELAY_INT_CFG_STRUC;
-#else
 typedef	union	_DELAY_INT_CFG_STRUC	{
 	struct	{
 		UINT32		RXMAX_PTIME:8;
@@ -238,20 +155,8 @@ typedef	union	_DELAY_INT_CFG_STRUC	{
 	}	field;
 	UINT32			word;
 } DELAY_INT_CFG_STRUC, *PDELAY_INT_CFG_STRUC;
-#endif
+
 #define WMM_AIFSN_CFG   0x0214
-#ifdef RT_BIG_ENDIAN
-typedef	union	_AIFSN_CSR_STRUC	{
-	struct	{
-	    UINT32   Rsv:16;
-	    UINT32   Aifsn3:4;       // for AC_VO
-	    UINT32   Aifsn2:4;       // for AC_VI
-	    UINT32   Aifsn1:4;       // for AC_BK
-	    UINT32   Aifsn0:4;       // for AC_BE
-	}	field;
-	UINT32			word;
-}	AIFSN_CSR_STRUC, *PAIFSN_CSR_STRUC;
-#else
 typedef	union	_AIFSN_CSR_STRUC	{
 	struct	{
 	    UINT32   Aifsn0:4;       // for AC_BE
@@ -262,23 +167,11 @@ typedef	union	_AIFSN_CSR_STRUC	{
 	}	field;
 	UINT32			word;
 }	AIFSN_CSR_STRUC, *PAIFSN_CSR_STRUC;
-#endif
+
 //
 // CWMIN_CSR: CWmin for each EDCA AC
 //
 #define WMM_CWMIN_CFG   0x0218
-#ifdef RT_BIG_ENDIAN
-typedef	union	_CWMIN_CSR_STRUC	{
-	struct	{
-	    UINT32   Rsv:16;
-	    UINT32   Cwmin3:4;       // for AC_VO
-	    UINT32   Cwmin2:4;       // for AC_VI
-	    UINT32   Cwmin1:4;       // for AC_BK
-	    UINT32   Cwmin0:4;       // for AC_BE
-	}	field;
-	UINT32			word;
-}	CWMIN_CSR_STRUC, *PCWMIN_CSR_STRUC;
-#else
 typedef	union	_CWMIN_CSR_STRUC	{
 	struct	{
 	    UINT32   Cwmin0:4;       // for AC_BE
@@ -289,24 +182,11 @@ typedef	union	_CWMIN_CSR_STRUC	{
 	}	field;
 	UINT32			word;
 }	CWMIN_CSR_STRUC, *PCWMIN_CSR_STRUC;
-#endif
 
 //
 // CWMAX_CSR: CWmin for each EDCA AC
 //
 #define WMM_CWMAX_CFG   0x021c
-#ifdef RT_BIG_ENDIAN
-typedef	union	_CWMAX_CSR_STRUC	{
-	struct	{
-	    UINT32   Rsv:16;
-	    UINT32   Cwmax3:4;       // for AC_VO
-	    UINT32   Cwmax2:4;       // for AC_VI
-	    UINT32   Cwmax1:4;       // for AC_BK
-	    UINT32   Cwmax0:4;       // for AC_BE
-	}	field;
-	UINT32			word;
-}	CWMAX_CSR_STRUC, *PCWMAX_CSR_STRUC;
-#else
 typedef	union	_CWMAX_CSR_STRUC	{
 	struct	{
 	    UINT32   Cwmax0:4;       // for AC_BE
@@ -317,22 +197,11 @@ typedef	union	_CWMAX_CSR_STRUC	{
 	}	field;
 	UINT32			word;
 }	CWMAX_CSR_STRUC, *PCWMAX_CSR_STRUC;
-#endif
-
 
 //
 // AC_TXOP_CSR0: AC_BK/AC_BE TXOP register
 //
 #define WMM_TXOP0_CFG    0x0220
-#ifdef RT_BIG_ENDIAN
-typedef	union	_AC_TXOP_CSR0_STRUC	{
-	struct	{
-	    USHORT  Ac1Txop;        // for AC_BE, in unit of 32us
-	    USHORT  Ac0Txop;        // for AC_BK, in unit of 32us
-	}	field;
-	UINT32			word;
-}	AC_TXOP_CSR0_STRUC, *PAC_TXOP_CSR0_STRUC;
-#else
 typedef	union	_AC_TXOP_CSR0_STRUC	{
 	struct	{
 	    USHORT  Ac0Txop;        // for AC_BK, in unit of 32us
@@ -340,21 +209,11 @@ typedef	union	_AC_TXOP_CSR0_STRUC	{
 	}	field;
 	UINT32			word;
 }	AC_TXOP_CSR0_STRUC, *PAC_TXOP_CSR0_STRUC;
-#endif
 
 //
 // AC_TXOP_CSR1: AC_VO/AC_VI TXOP register
 //
 #define WMM_TXOP1_CFG    0x0224
-#ifdef RT_BIG_ENDIAN
-typedef	union	_AC_TXOP_CSR1_STRUC	{
-	struct	{
-	    USHORT  Ac3Txop;        // for AC_VO, in unit of 32us
-	    USHORT  Ac2Txop;        // for AC_VI, in unit of 32us
-	}	field;
-	UINT32			word;
-}	AC_TXOP_CSR1_STRUC, *PAC_TXOP_CSR1_STRUC;
-#else
 typedef	union	_AC_TXOP_CSR1_STRUC	{
 	struct	{
 	    USHORT  Ac2Txop;        // for AC_VI, in unit of 32us
@@ -362,7 +221,7 @@ typedef	union	_AC_TXOP_CSR1_STRUC	{
 	}	field;
 	UINT32			word;
 }	AC_TXOP_CSR1_STRUC, *PAC_TXOP_CSR1_STRUC;
-#endif
+
 #define RINGREG_DIFF			0x10
 #define GPIO_CTRL_CFG    0x0228	//MAC_CSR13
 #define MCU_CMD_CFG    0x022c
@@ -398,25 +257,7 @@ typedef	union	_AC_TXOP_CSR1_STRUC	{
 #define RX_CRX_IDX       0x0298
 #define RX_DRX_IDX      0x029c
 #define USB_DMA_CFG      0x02a0
-#ifdef RT_BIG_ENDIAN
-typedef	union	_USB_DMA_CFG_STRUC	{
-	struct	{
-	    UINT32  TxBusy:1;   	//USB DMA TX FSM busy . debug only
-	    UINT32  RxBusy:1;        //USB DMA RX FSM busy . debug only
-	    UINT32  EpoutValid:6;        //OUT endpoint data valid. debug only
-	    UINT32  TxBulkEn:1;        //Enable USB DMA Tx
-	    UINT32  RxBulkEn:1;        //Enable USB DMA Rx
-	    UINT32  RxBulkAggEn:1;        //Enable Rx Bulk Aggregation
-	    UINT32  TxopHalt:1;        //Halt TXOP count down when TX buffer is full.
-	    UINT32  TxClear:1;        //Clear USB DMA TX path
-	    UINT32  rsv:2;
-	    UINT32  phyclear:1;        		//phy watch dog enable. write 1
-	    UINT32  RxBulkAggLmt:8;        //Rx Bulk Aggregation Limit  in unit of 1024 bytes
-	    UINT32  RxBulkAggTOut:8;        //Rx Bulk Aggregation TimeOut  in unit of 33ns
-	}	field;
-	UINT32			word;
-}	USB_DMA_CFG_STRUC, *PUSB_DMA_CFG_STRUC;
-#else
+
 typedef	union	_USB_DMA_CFG_STRUC	{
 	struct	{
 	    UINT32  RxBulkAggTOut:8;        //Rx Bulk Aggregation TimeOut  in unit of 33ns
@@ -434,7 +275,6 @@ typedef	union	_USB_DMA_CFG_STRUC	{
 	}	field;
 	UINT32			word;
 }	USB_DMA_CFG_STRUC, *PUSB_DMA_CFG_STRUC;
-#endif
 
 //
 //  3  PBF  registers
@@ -451,6 +291,36 @@ typedef	union	_USB_DMA_CFG_STRUC	{
 #define 	PBF_DBG 	 	 0x043c
 #define     PBF_CAP_CTRL     0x0440
 
+#ifdef RT30xx
+// eFuse registers
+#define EFUSE_CTRL              0x0580
+#define EFUSE_DATA0             0x0590
+#define EFUSE_DATA1             0x0594
+#define EFUSE_DATA2             0x0598
+#define EFUSE_DATA3             0x059c
+#define EFUSE_USAGE_MAP_START   0x2d0
+#define EFUSE_USAGE_MAP_END     0x2fc
+#define EFUSE_TAG               0x2fe
+#define EFUSE_USAGE_MAP_SIZE    45
+
+typedef	union	_EFUSE_CTRL_STRUC {
+	struct	{
+		UINT32            EFSROM_AOUT:6;
+		UINT32            EFSROM_MODE:2;
+		UINT32            EFSROM_LDO_OFF_TIME:6;
+		UINT32            EFSROM_LDO_ON_TIME:2;
+		UINT32            EFSROM_AIN:10;
+		UINT32            RESERVED:4;
+		UINT32            EFSROM_KICK:1;
+		UINT32            SEL_EFUSE:1;
+	}	field;
+	UINT32			word;
+}	EFUSE_CTRL_STRUC, *PEFUSE_CTRL_STRUC;
+
+#define LDO_CFG0 				0x05d4
+#define GPIO_SWITCH				0x05dc
+#endif /* RT30xx */
+
 //
 //  4  MAC  registers
 //
@@ -458,15 +328,6 @@ typedef	union	_USB_DMA_CFG_STRUC	{
 //  4.1 MAC SYSTEM  configuration registers (offset:0x1000)
 //
 #define MAC_CSR0            0x1000
-#ifdef RT_BIG_ENDIAN
-typedef	union	_ASIC_VER_ID_STRUC	{
-	struct	{
-	    USHORT  ASICVer;        // version : 2860
-	    USHORT  ASICRev;        // reversion  : 0
-	}	field;
-	UINT32			word;
-}	ASIC_VER_ID_STRUC, *PASIC_VER_ID_STRUC;
-#else
 typedef	union	_ASIC_VER_ID_STRUC	{
 	struct	{
 	    USHORT  ASICRev;        // reversion  : 0
@@ -474,24 +335,13 @@ typedef	union	_ASIC_VER_ID_STRUC	{
 	}	field;
 	UINT32			word;
 }	ASIC_VER_ID_STRUC, *PASIC_VER_ID_STRUC;
-#endif
+
 #define MAC_SYS_CTRL            0x1004		//MAC_CSR1
 #define MAC_ADDR_DW0            		0x1008		// MAC ADDR DW0
 #define MAC_ADDR_DW1           		 0x100c		// MAC ADDR DW1
 //
 // MAC_CSR2: STA MAC register 0
 //
-#ifdef RT_BIG_ENDIAN
-typedef	union	_MAC_DW0_STRUC	{
-	struct	{
-		UCHAR		Byte3;		// MAC address byte 3
-		UCHAR		Byte2;		// MAC address byte 2
-		UCHAR		Byte1;		// MAC address byte 1
-		UCHAR		Byte0;		// MAC address byte 0
-	}	field;
-	UINT32			word;
-}	MAC_DW0_STRUC, *PMAC_DW0_STRUC;
-#else
 typedef	union	_MAC_DW0_STRUC	{
 	struct	{
 		UCHAR		Byte0;		// MAC address byte 0
@@ -501,22 +351,10 @@ typedef	union	_MAC_DW0_STRUC	{
 	}	field;
 	UINT32			word;
 }	MAC_DW0_STRUC, *PMAC_DW0_STRUC;
-#endif
 
 //
 // MAC_CSR3: STA MAC register 1
 //
-#ifdef RT_BIG_ENDIAN
-typedef	union	_MAC_DW1_STRUC	{
-	struct	{
-		UCHAR		Rsvd1;
-		UCHAR		U2MeMask;
-		UCHAR		Byte5;		// MAC address byte 5
-		UCHAR		Byte4;		// MAC address byte 4
-	}	field;
-	UINT32			word;
-}	MAC_DW1_STRUC, *PMAC_DW1_STRUC;
-#else
 typedef	union	_MAC_DW1_STRUC	{
 	struct	{
 		UCHAR		Byte4;		// MAC address byte 4
@@ -526,7 +364,6 @@ typedef	union	_MAC_DW1_STRUC	{
 	}	field;
 	UINT32			word;
 }	MAC_DW1_STRUC, *PMAC_DW1_STRUC;
-#endif
 
 #define MAC_BSSID_DW0            		0x1010		// MAC BSSID DW0
 #define MAC_BSSID_DW1            		0x1014		// MAC BSSID DW1
@@ -534,18 +371,6 @@ typedef	union	_MAC_DW1_STRUC	{
 //
 // MAC_CSR5: BSSID register 1
 //
-#ifdef RT_BIG_ENDIAN
-typedef	union	_MAC_CSR5_STRUC	{
-	struct	{
-		USHORT		Rsvd:11;
-		USHORT		MBssBcnNum:3;
-		USHORT		BssIdMode:2; // 0: one BSSID, 10: 4 BSSID,  01: 2 BSSID , 11: 8BSSID
-		UCHAR		Byte5;		 // BSSID byte 5
-		UCHAR		Byte4;		 // BSSID byte 4
-	}	field;
-	UINT32			word;
-}	MAC_CSR5_STRUC, *PMAC_CSR5_STRUC;
-#else
 typedef	union	_MAC_CSR5_STRUC	{
 	struct	{
 		UCHAR		Byte4;		 // BSSID byte 4
@@ -556,27 +381,12 @@ typedef	union	_MAC_CSR5_STRUC	{
 	}	field;
 	UINT32			word;
 }	MAC_CSR5_STRUC, *PMAC_CSR5_STRUC;
-#endif
 
 #define MAX_LEN_CFG              0x1018		// rt2860b max 16k bytes. bit12:13 Maximum PSDU length (power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16
 #define BBP_CSR_CFG            		0x101c		//
 //
 // BBP_CSR_CFG: BBP serial control register
 //
-#ifdef RT_BIG_ENDIAN
-typedef	union	_BBP_CSR_CFG_STRUC	{
-	struct	{
-		UINT32		:12;
-		UINT32		BBP_RW_MODE:1;		// 0: use serial mode  1:parallel
-		UINT32		BBP_PAR_DUR:1;		    // 0: 4 MAC clock cycles  1: 8 MAC clock cycles
-		UINT32		Busy:1;				// 1: ASIC is busy execute BBP programming.
-		UINT32		fRead:1;		    // 0: Write	BBP, 1:	Read BBP
-		UINT32		RegNum:8;			// Selected	BBP	register
-		UINT32		Value:8;			// Register	value to program into BBP
-	}	field;
-	UINT32			word;
-}	BBP_CSR_CFG_STRUC, *PBBP_CSR_CFG_STRUC;
-#else
 typedef	union	_BBP_CSR_CFG_STRUC	{
 	struct	{
 		UINT32		Value:8;			// Register	value to program into BBP
@@ -589,23 +399,11 @@ typedef	union	_BBP_CSR_CFG_STRUC	{
 	}	field;
 	UINT32			word;
 }	BBP_CSR_CFG_STRUC, *PBBP_CSR_CFG_STRUC;
-#endif
+
 #define RF_CSR_CFG0            		0x1020
 //
 // RF_CSR_CFG: RF control register
 //
-#ifdef RT_BIG_ENDIAN
-typedef	union	_RF_CSR_CFG0_STRUC	{
-	struct	{
-		UINT32		Busy:1;		    // 0: idle 1: 8busy
-		UINT32		Sel:1;				// 0:RF_LE0 activate  1:RF_LE1 activate
-		UINT32		StandbyMode:1;		    // 0: high when stand by 1:	low when standby
-		UINT32		bitwidth:5;			// Selected	BBP	register
-		UINT32		RegIdAndContent:24;			// Register	value to program into BBP
-	}	field;
-	UINT32			word;
-}	RF_CSR_CFG0_STRUC, *PRF_CSR_CFG0_STRUC;
-#else
 typedef	union	_RF_CSR_CFG0_STRUC	{
 	struct	{
 		UINT32		RegIdAndContent:24;			// Register	value to program into BBP
@@ -616,18 +414,8 @@ typedef	union	_RF_CSR_CFG0_STRUC	{
 	}	field;
 	UINT32			word;
 }	RF_CSR_CFG0_STRUC, *PRF_CSR_CFG0_STRUC;
-#endif
+
 #define RF_CSR_CFG1           		0x1024
-#ifdef RT_BIG_ENDIAN
-typedef	union	_RF_CSR_CFG1_STRUC	{
-	struct	{
-		UINT32		rsv:7;		    // 0: idle 1: 8busy
-		UINT32		RFGap:5;			// Gap between BB_CONTROL_RF and RF_LE. 0: 3 system clock cycle (37.5usec) 1: 5 system clock cycle (62.5usec)
-		UINT32		RegIdAndContent:24;			// Register	value to program into BBP
-	}	field;
-	UINT32			word;
-}	RF_CSR_CFG1_STRUC, *PRF_CSR_CFG1_STRUC;
-#else
 typedef	union	_RF_CSR_CFG1_STRUC	{
 	struct	{
 		UINT32		RegIdAndContent:24;			// Register	value to program into BBP
@@ -636,17 +424,8 @@ typedef	union	_RF_CSR_CFG1_STRUC	{
 	}	field;
 	UINT32			word;
 }	RF_CSR_CFG1_STRUC, *PRF_CSR_CFG1_STRUC;
-#endif
+
 #define RF_CSR_CFG2           		0x1028		//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_RF_CSR_CFG2_STRUC	{
-	struct	{
-		UINT32		rsv:8;		    // 0: idle 1: 8busy
-		UINT32		RegIdAndContent:24;			// Register	value to program into BBP
-	}	field;
-	UINT32			word;
-}	RF_CSR_CFG2_STRUC, *PRF_CSR_CFG2_STRUC;
-#else
 typedef	union	_RF_CSR_CFG2_STRUC	{
 	struct	{
 		UINT32		RegIdAndContent:24;			// Register	value to program into BBP
@@ -654,24 +433,8 @@ typedef	union	_RF_CSR_CFG2_STRUC	{
 	}	field;
 	UINT32			word;
 }	RF_CSR_CFG2_STRUC, *PRF_CSR_CFG2_STRUC;
-#endif
+
 #define LED_CFG           		0x102c		//  MAC_CSR14
-#ifdef RT_BIG_ENDIAN
-typedef	union	_LED_CFG_STRUC	{
-	struct	{
-		UINT32		:1;
-		UINT32		LedPolar:1;			// Led Polarity.  0: active low1: active high
-		UINT32		YLedMode:2;			// yellow Led Mode
-		UINT32		GLedMode:2;			// green Led Mode
-		UINT32		RLedMode:2;			// red Led Mode    0: off1: blinking upon TX2: periodic slow blinking3: always on
-		UINT32		rsv:2;
-		UINT32		SlowBlinkPeriod:6;			// slow blinking period. unit:1ms
-		UINT32		OffPeriod:8;			// blinking off period unit 1ms
-		UINT32		OnPeriod:8;			// blinking on period unit 1ms
-	}	field;
-	UINT32			word;
-}	LED_CFG_STRUC, *PLED_CFG_STRUC;
-#else
 typedef	union	_LED_CFG_STRUC	{
 	struct	{
 		UINT32		OnPeriod:8;			// blinking on period unit 1ms
@@ -686,24 +449,11 @@ typedef	union	_LED_CFG_STRUC	{
 	}	field;
 	UINT32			word;
 }	LED_CFG_STRUC, *PLED_CFG_STRUC;
-#endif
+
 //
 //  4.2 MAC TIMING  configuration registers (offset:0x1100)
 //
 #define XIFS_TIME_CFG             0x1100		 // MAC_CSR8  MAC_CSR9
-#ifdef RT_BIG_ENDIAN
-typedef	union	_IFS_SLOT_CFG_STRUC	{
-	struct	{
-	    UINT32  rsv:2;
-	    UINT32  BBRxendEnable:1;        //  reference RXEND signal to begin XIFS defer
-	    UINT32  EIFS:9;        //  unit 1us
-	    UINT32  OfdmXifsTime:4;        //OFDM SIFS. unit 1us. Applied after OFDM RX when MAC doesn't reference BBP signal BBRXEND
-	    UINT32  OfdmSifsTime:8;        //  unit 1us. Applied after OFDM RX/TX
-	    UINT32  CckmSifsTime:8;        //  unit 1us. Applied after CCK RX/TX
-	}	field;
-	UINT32			word;
-}	IFS_SLOT_CFG_STRUC, *PIFS_SLOT_CFG_STRUC;
-#else
 typedef	union	_IFS_SLOT_CFG_STRUC	{
 	struct	{
 	    UINT32  CckmSifsTime:8;        //  unit 1us. Applied after CCK RX/TX
@@ -715,7 +465,6 @@ typedef	union	_IFS_SLOT_CFG_STRUC	{
 	}	field;
 	UINT32			word;
 }	IFS_SLOT_CFG_STRUC, *PIFS_SLOT_CFG_STRUC;
-#endif
 
 #define BKOFF_SLOT_CFG             0x1104		 //  mac_csr9 last 8 bits
 #define NAV_TIME_CFG             0x1108		 // NAV  (MAC_CSR15)
@@ -729,20 +478,6 @@ typedef	union	_IFS_SLOT_CFG_STRUC	{
 //
 // BCN_TIME_CFG : Synchronization control register
 //
-#ifdef RT_BIG_ENDIAN
-typedef	union	_BCN_TIME_CFG_STRUC	{
-	struct	{
-		UINT32		TxTimestampCompensate:8;
-        UINT32       :3;
-		UINT32		bBeaconGen:1;		// Enable beacon generator
-        UINT32       bTBTTEnable:1;
-		UINT32		TsfSyncMode:2;		// Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode
-		UINT32		bTsfTicking:1;		// Enable TSF auto counting
-		UINT32       BeaconInterval:16;  // in unit of 1/16 TU
-	}	field;
-	UINT32			word;
-}	BCN_TIME_CFG_STRUC, *PBCN_TIME_CFG_STRUC;
-#else
 typedef	union	_BCN_TIME_CFG_STRUC	{
 	struct	{
 		UINT32       BeaconInterval:16;  // in unit of 1/16 TU
@@ -755,7 +490,7 @@ typedef	union	_BCN_TIME_CFG_STRUC	{
 	}	field;
 	UINT32			word;
 }	BCN_TIME_CFG_STRUC, *PBCN_TIME_CFG_STRUC;
-#endif
+
 #define TBTT_SYNC_CFG            0x1118  		// txrx_csr10
 #define TSF_TIMER_DW0             0x111C  		// Local TSF timer lsb 32 bits. Read-only
 #define TSF_TIMER_DW1             0x1120  		// msb 32 bits. Read-only.
@@ -773,17 +508,6 @@ typedef	union	_BCN_TIME_CFG_STRUC	{
 //
 // AUTO_WAKEUP_CFG: Manual power control / status register
 //
-#ifdef RT_BIG_ENDIAN
-typedef	union	_AUTO_WAKEUP_STRUC	{
-	struct	{
-		UINT32		:16;
-		UINT32		EnableAutoWakeup:1;	// 0:sleep, 1:awake
-		UINT32       NumofSleepingTbtt:7;          // ForceWake has high privilege than PutToSleep when both set
-		UINT32       AutoLeadTime:8;
-	}	field;
-	UINT32			word;
-}	AUTO_WAKEUP_STRUC, *PAUTO_WAKEUP_STRUC;
-#else
 typedef	union	_AUTO_WAKEUP_STRUC	{
 	struct	{
 		UINT32       AutoLeadTime:8;
@@ -793,7 +517,7 @@ typedef	union	_AUTO_WAKEUP_STRUC	{
 	}	field;
 	UINT32			word;
 }	AUTO_WAKEUP_STRUC, *PAUTO_WAKEUP_STRUC;
-#endif
+
 //
 //  4.3 MAC TX  configuration registers (offset:0x1300)
 //
@@ -802,18 +526,6 @@ typedef	union	_AUTO_WAKEUP_STRUC	{
 #define EDCA_AC1_CFG	0x1304
 #define EDCA_AC2_CFG	0x1308
 #define EDCA_AC3_CFG	0x130c
-#ifdef RT_BIG_ENDIAN
-typedef	union	_EDCA_AC_CFG_STRUC	{
-	struct	{
-	    UINT32  :12;        //
-	    UINT32  Cwmax:4;        //unit power of 2
-	    UINT32  Cwmin:4;        //
-	    UINT32  Aifsn:4;        // # of slot time
-	    UINT32  AcTxop:8;        //  in unit of 32us
-	}	field;
-	UINT32			word;
-}	EDCA_AC_CFG_STRUC, *PEDCA_AC_CFG_STRUC;
-#else
 typedef	union	_EDCA_AC_CFG_STRUC	{
 	struct	{
 	    UINT32  AcTxop:8;        //  in unit of 32us
@@ -824,7 +536,6 @@ typedef	union	_EDCA_AC_CFG_STRUC	{
 	}	field;
 	UINT32			word;
 }	EDCA_AC_CFG_STRUC, *PEDCA_AC_CFG_STRUC;
-#endif
 
 #define EDCA_TID_AC_MAP	0x1310
 #define TX_PWR_CFG_0	0x1314
@@ -841,17 +552,6 @@ typedef	union	_EDCA_AC_CFG_STRUC	{
 #define TXOP_CTRL_CFG		0x1340
 #define TX_RTS_CFG		0x1344
 
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_RTS_CFG_STRUC	{
-	struct	{
-	    UINT32       rsv:7;
-	    UINT32       RtsFbkEn:1;    // enable rts rate fallback
-	    UINT32       RtsThres:16;    // unit:byte
-	    UINT32       AutoRtsRetryLimit:8;
-	}	field;
-	UINT32			word;
-}	TX_RTS_CFG_STRUC, *PTX_RTS_CFG_STRUC;
-#else
 typedef	union	_TX_RTS_CFG_STRUC	{
 	struct	{
 	    UINT32       AutoRtsRetryLimit:8;
@@ -861,20 +561,8 @@ typedef	union	_TX_RTS_CFG_STRUC	{
 	}	field;
 	UINT32			word;
 }	TX_RTS_CFG_STRUC, *PTX_RTS_CFG_STRUC;
-#endif
+
 #define TX_TIMEOUT_CFG	0x1348
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_TIMEOUT_CFG_STRUC	{
-	struct	{
-	    UINT32       rsv2:8;
-	    UINT32       TxopTimeout:8;	//TXOP timeout value for TXOP truncation.  It is recommended that (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT)
-	    UINT32       RxAckTimeout:8;	// unit:slot. Used for TX precedure
-	    UINT32       MpduLifeTime:4;    //  expiration time = 2^(9+MPDU LIFE TIME)  us
-	    UINT32       rsv:4;
-	}	field;
-	UINT32			word;
-}	TX_TIMEOUT_CFG_STRUC, *PTX_TIMEOUT_CFG_STRUC;
-#else
 typedef	union	_TX_TIMEOUT_CFG_STRUC	{
 	struct	{
 	    UINT32       rsv:4;
@@ -885,23 +573,8 @@ typedef	union	_TX_TIMEOUT_CFG_STRUC	{
 	}	field;
 	UINT32			word;
 }	TX_TIMEOUT_CFG_STRUC, *PTX_TIMEOUT_CFG_STRUC;
-#endif
-#define TX_RTY_CFG	0x134c
-#ifdef RT_BIG_ENDIAN
-typedef	union PACKED _TX_RTY_CFG_STRUC	{
-	struct	{
-	    UINT32       rsv:1;
-	    UINT32       TxautoFBEnable:1;    // Tx retry PHY rate auto fallback enable
-	    UINT32       AggRtyMode:1;	// Aggregate MPDU retry mode.  0:expired by retry limit, 1: expired by mpdu life timer
-	    UINT32       NonAggRtyMode:1;	// Non-Aggregate MPDU retry mode.  0:expired by retry limit, 1: expired by mpdu life timer
-	    UINT32       LongRtyThre:12;	// Long retry threshoold
-	    UINT32       LongRtyLimit:8;	//long retry limit
-	    UINT32       ShortRtyLimit:8;	//  short retry limit
 
-	}	field;
-	UINT32			word;
-}	TX_RTY_CFG_STRUC, *PTX_RTY_CFG_STRUC;
-#else
+#define TX_RTY_CFG	0x134c
 typedef	union PACKED _TX_RTY_CFG_STRUC	{
 	struct	{
 	    UINT32       ShortRtyLimit:8;	//  short retry limit
@@ -914,24 +587,8 @@ typedef	union PACKED _TX_RTY_CFG_STRUC	{
 	}	field;
 	UINT32			word;
 }	TX_RTY_CFG_STRUC, *PTX_RTY_CFG_STRUC;
-#endif
+
 #define TX_LINK_CFG	0x1350
-#ifdef RT_BIG_ENDIAN
-typedef	union	PACKED _TX_LINK_CFG_STRUC	{
-	struct PACKED {
-	    UINT32       RemotMFS:8;	//remote MCS feedback sequence number
-	    UINT32       RemotMFB:8;    //  remote MCS feedback
-	    UINT32       rsv:3;	//
-	    UINT32       TxCFAckEn:1;	//   Piggyback CF-ACK enable
-	    UINT32       TxRDGEn:1;	// RDG TX enable
-	    UINT32       TxMRQEn:1;	//  MCS request TX enable
-	    UINT32       RemoteUMFSEnable:1;	//  remote unsolicit  MFB enable.  0: not apply remote remote unsolicit (MFS=7)
-	    UINT32       MFBEnable:1;	//  TX apply remote MFB 1:enable
-	    UINT32       RemoteMFBLifeTime:8;	//remote MFB life time. unit : 32us
-	}	field;
-	UINT32			word;
-}	TX_LINK_CFG_STRUC, *PTX_LINK_CFG_STRUC;
-#else
 typedef	union	PACKED _TX_LINK_CFG_STRUC	{
 	struct PACKED {
 	    UINT32       RemoteMFBLifeTime:8;	//remote MFB life time. unit : 32us
@@ -946,23 +603,8 @@ typedef	union	PACKED _TX_LINK_CFG_STRUC	{
 	}	field;
 	UINT32			word;
 }	TX_LINK_CFG_STRUC, *PTX_LINK_CFG_STRUC;
-#endif
+
 #define HT_FBK_CFG0	0x1354
-#ifdef RT_BIG_ENDIAN
-typedef	union PACKED _HT_FBK_CFG0_STRUC	{
-	struct	{
-	    UINT32       HTMCS7FBK:4;
-	    UINT32       HTMCS6FBK:4;
-	    UINT32       HTMCS5FBK:4;
-	    UINT32       HTMCS4FBK:4;
-	    UINT32       HTMCS3FBK:4;
-	    UINT32       HTMCS2FBK:4;
-	    UINT32       HTMCS1FBK:4;
-	    UINT32       HTMCS0FBK:4;
-	}	field;
-	UINT32			word;
-}	HT_FBK_CFG0_STRUC, *PHT_FBK_CFG0_STRUC;
-#else
 typedef	union PACKED _HT_FBK_CFG0_STRUC	{
 	struct	{
 	    UINT32       HTMCS0FBK:4;
@@ -976,23 +618,8 @@ typedef	union PACKED _HT_FBK_CFG0_STRUC	{
 	}	field;
 	UINT32			word;
 }	HT_FBK_CFG0_STRUC, *PHT_FBK_CFG0_STRUC;
-#endif
+
 #define HT_FBK_CFG1	0x1358
-#ifdef RT_BIG_ENDIAN
-typedef	union	_HT_FBK_CFG1_STRUC	{
-	struct	{
-	    UINT32       HTMCS15FBK:4;
-	    UINT32       HTMCS14FBK:4;
-	    UINT32       HTMCS13FBK:4;
-	    UINT32       HTMCS12FBK:4;
-	    UINT32       HTMCS11FBK:4;
-	    UINT32       HTMCS10FBK:4;
-	    UINT32       HTMCS9FBK:4;
-	    UINT32       HTMCS8FBK:4;
-	}	field;
-	UINT32			word;
-}	HT_FBK_CFG1_STRUC, *PHT_FBK_CFG1_STRUC;
-#else
 typedef	union	_HT_FBK_CFG1_STRUC	{
 	struct	{
 	    UINT32       HTMCS8FBK:4;
@@ -1006,23 +633,8 @@ typedef	union	_HT_FBK_CFG1_STRUC	{
 	}	field;
 	UINT32			word;
 }	HT_FBK_CFG1_STRUC, *PHT_FBK_CFG1_STRUC;
-#endif
+
 #define LG_FBK_CFG0	0x135c
-#ifdef RT_BIG_ENDIAN
-typedef	union	_LG_FBK_CFG0_STRUC	{
-	struct	{
-	    UINT32       OFDMMCS7FBK:4;	//initial value is 6
-	    UINT32       OFDMMCS6FBK:4;	//initial value is 5
-	    UINT32       OFDMMCS5FBK:4;	//initial value is 4
-	    UINT32       OFDMMCS4FBK:4;	//initial value is 3
-	    UINT32       OFDMMCS3FBK:4;	//initial value is 2
-	    UINT32       OFDMMCS2FBK:4;	//initial value is 1
-	    UINT32       OFDMMCS1FBK:4;	//initial value is 0
-	    UINT32       OFDMMCS0FBK:4;	//initial value is 0
-	}	field;
-	UINT32			word;
-}	LG_FBK_CFG0_STRUC, *PLG_FBK_CFG0_STRUC;
-#else
 typedef	union	_LG_FBK_CFG0_STRUC	{
 	struct	{
 	    UINT32       OFDMMCS0FBK:4;	//initial value is 0
@@ -1036,20 +648,8 @@ typedef	union	_LG_FBK_CFG0_STRUC	{
 	}	field;
 	UINT32			word;
 }	LG_FBK_CFG0_STRUC, *PLG_FBK_CFG0_STRUC;
-#endif
+
 #define LG_FBK_CFG1		0x1360
-#ifdef RT_BIG_ENDIAN
-typedef	union	_LG_FBK_CFG1_STRUC	{
-	struct	{
-	    UINT32       rsv:16;
-	    UINT32       CCKMCS3FBK:4;	//initial value is 2
-	    UINT32       CCKMCS2FBK:4;	//initial value is 1
-	    UINT32       CCKMCS1FBK:4;	//initial value is 0
-	    UINT32       CCKMCS0FBK:4;	//initial value is 0
-	}	field;
-	UINT32			word;
-}	LG_FBK_CFG1_STRUC, *PLG_FBK_CFG1_STRUC;
-#else
 typedef	union	_LG_FBK_CFG1_STRUC	{
 	struct	{
 	    UINT32       CCKMCS0FBK:4;	//initial value is 0
@@ -1060,7 +660,6 @@ typedef	union	_LG_FBK_CFG1_STRUC	{
 	}	field;
 	UINT32			word;
 }	LG_FBK_CFG1_STRUC, *PLG_FBK_CFG1_STRUC;
-#endif
 
 //=======================================================
 //================ Protection Paramater================================
@@ -1070,24 +669,6 @@ typedef	union	_LG_FBK_CFG1_STRUC	{
 #define ASIC_LONGNAV		2
 #define ASIC_RTS		1
 #define ASIC_CTS		2
-#ifdef RT_BIG_ENDIAN
-typedef	union	_PROT_CFG_STRUC	{
-	struct	{
-	    UINT32       rsv:5;
-	    UINT32       RTSThEn:1;	//RTS threshold enable on CCK TX
-	    UINT32       TxopAllowGF40:1;	//CCK TXOP allowance.0:disallow.
-	    UINT32       TxopAllowGF20:1;	//CCK TXOP allowance.0:disallow.
-	    UINT32       TxopAllowMM40:1;	//CCK TXOP allowance.0:disallow.
-	    UINT32       TxopAllowMM20:1;	//CCK TXOP allowance. 0:disallow.
-	    UINT32       TxopAllowOfdm:1;	//CCK TXOP allowance.0:disallow.
-	    UINT32       TxopAllowCck:1;	//CCK TXOP allowance.0:disallow.
-	    UINT32       ProtectNav:2;	//TXOP protection type for CCK TX. 0:None, 1:ShortNAVprotect,  2:LongNAVProtect, 3:rsv
-	    UINT32       ProtectCtrl:2;	//Protection control frame type for CCK TX. 1:RTS/CTS, 2:CTS-to-self, 0:None, 3:rsv
-	    UINT32       ProtectRate:16;	//Protection control frame rate for CCK TX(RTS/CTS/CFEnd).
-	}	field;
-	UINT32			word;
-}	PROT_CFG_STRUC, *PPROT_CFG_STRUC;
-#else
 typedef	union	_PROT_CFG_STRUC	{
 	struct	{
 	    UINT32       ProtectRate:16;	//Protection control frame rate for CCK TX(RTS/CTS/CFEnd).
@@ -1104,7 +685,6 @@ typedef	union	_PROT_CFG_STRUC	{
 	}	field;
 	UINT32			word;
 }	PROT_CFG_STRUC, *PPROT_CFG_STRUC;
-#endif
 
 #define OFDM_PROT_CFG	0x1368		//OFDM Protection
 #define MM20_PROT_CFG	0x136C		//MM20 Protection
@@ -1122,22 +702,6 @@ typedef	union	_PROT_CFG_STRUC	{
 //
 // TXRX_CSR4: Auto-Responder/
 //
-#ifdef RT_BIG_ENDIAN
-typedef union _AUTO_RSP_CFG_STRUC {
- struct {
-     UINT32        :24;
-     UINT32       AckCtsPsmBit:1;   // Power bit value in conrtrol frame
-     UINT32       DualCTSEn:1;   // Power bit value in conrtrol frame
-     UINT32       rsv:1;   // Power bit value in conrtrol frame
-     UINT32       AutoResponderPreamble:1;    // 0:long, 1:short preamble
-     UINT32       CTS40MRef:1;  // Response CTS 40MHz duplicate mode
-     UINT32       CTS40MMode:1;  // Response CTS 40MHz duplicate mode
-     UINT32       BACAckPolicyEnable:1;    // 0:long, 1:short preamble
-     UINT32       AutoResponderEnable:1;
- } field;
- UINT32   word;
-} AUTO_RSP_CFG_STRUC, *PAUTO_RSP_CFG_STRUC;
-#else
 typedef union _AUTO_RSP_CFG_STRUC {
  struct {
      UINT32       AutoResponderEnable:1;
@@ -1152,7 +716,6 @@ typedef union _AUTO_RSP_CFG_STRUC {
  } field;
  UINT32   word;
 } AUTO_RSP_CFG_STRUC, *PAUTO_RSP_CFG_STRUC;
-#endif
 
 #define LEGACY_BASIC_RATE	0x1408	//  TXRX_CSR5           0x3054
 #define HT_BASIC_RATE		0x140c
@@ -1185,15 +748,6 @@ typedef union _AUTO_RSP_CFG_STRUC {
 //
 // RX_STA_CNT0_STRUC: RX PLCP error count & RX CRC error count
 //
-#ifdef RT_BIG_ENDIAN
-typedef	union	_RX_STA_CNT0_STRUC	{
-	struct	{
-	    USHORT  PhyErr;
-	    USHORT  CrcErr;
-	}	field;
-	UINT32			word;
-}	RX_STA_CNT0_STRUC, *PRX_STA_CNT0_STRUC;
-#else
 typedef	union	_RX_STA_CNT0_STRUC	{
 	struct	{
 	    USHORT  CrcErr;
@@ -1201,20 +755,10 @@ typedef	union	_RX_STA_CNT0_STRUC	{
 	}	field;
 	UINT32			word;
 }	RX_STA_CNT0_STRUC, *PRX_STA_CNT0_STRUC;
-#endif
 
 //
 // RX_STA_CNT1_STRUC: RX False CCA count & RX LONG frame count
 //
-#ifdef RT_BIG_ENDIAN
-typedef	union	_RX_STA_CNT1_STRUC	{
-	struct	{
-	    USHORT  PlcpErr;
-	    USHORT  FalseCca;
-	}	field;
-	UINT32			word;
-}	RX_STA_CNT1_STRUC, *PRX_STA_CNT1_STRUC;
-#else
 typedef	union	_RX_STA_CNT1_STRUC	{
 	struct	{
 	    USHORT  FalseCca;
@@ -1222,20 +766,10 @@ typedef	union	_RX_STA_CNT1_STRUC	{
 	}	field;
 	UINT32			word;
 }	RX_STA_CNT1_STRUC, *PRX_STA_CNT1_STRUC;
-#endif
 
 //
 // RX_STA_CNT2_STRUC:
 //
-#ifdef RT_BIG_ENDIAN
-typedef	union	_RX_STA_CNT2_STRUC	{
-	struct	{
-	    USHORT  RxFifoOverflowCount;
-	    USHORT  RxDupliCount;
-	}	field;
-	UINT32			word;
-}	RX_STA_CNT2_STRUC, *PRX_STA_CNT2_STRUC;
-#else
 typedef	union	_RX_STA_CNT2_STRUC	{
 	struct	{
 	    USHORT  RxDupliCount;
@@ -1243,20 +777,11 @@ typedef	union	_RX_STA_CNT2_STRUC	{
 	}	field;
 	UINT32			word;
 }	RX_STA_CNT2_STRUC, *PRX_STA_CNT2_STRUC;
-#endif
+
 #define TX_STA_CNT0		0x170C		//
 //
 // STA_CSR3: TX Beacon count
 //
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_STA_CNT0_STRUC	{
-	struct	{
-	    USHORT  TxBeaconCount;
-	    USHORT  TxFailCount;
-	}	field;
-	UINT32			word;
-}	TX_STA_CNT0_STRUC, *PTX_STA_CNT0_STRUC;
-#else
 typedef	union	_TX_STA_CNT0_STRUC	{
 	struct	{
 	    USHORT  TxFailCount;
@@ -1264,20 +789,11 @@ typedef	union	_TX_STA_CNT0_STRUC	{
 	}	field;
 	UINT32			word;
 }	TX_STA_CNT0_STRUC, *PTX_STA_CNT0_STRUC;
-#endif
+
 #define TX_STA_CNT1		0x1710		//
 //
 // TX_STA_CNT1: TX tx count
 //
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_STA_CNT1_STRUC	{
-	struct	{
-	    USHORT  TxRetransmit;
-	    USHORT  TxSuccess;
-	}	field;
-	UINT32			word;
-}	TX_STA_CNT1_STRUC, *PTX_STA_CNT1_STRUC;
-#else
 typedef	union	_TX_STA_CNT1_STRUC	{
 	struct	{
 	    USHORT  TxSuccess;
@@ -1285,20 +801,11 @@ typedef	union	_TX_STA_CNT1_STRUC	{
 	}	field;
 	UINT32			word;
 }	TX_STA_CNT1_STRUC, *PTX_STA_CNT1_STRUC;
-#endif
+
 #define TX_STA_CNT2		0x1714		//
 //
 // TX_STA_CNT2: TX tx count
 //
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_STA_CNT2_STRUC	{
-	struct	{
-	    USHORT  TxUnderFlowCount;
-	    USHORT  TxZeroLenCount;
-	}	field;
-	UINT32			word;
-}	TX_STA_CNT2_STRUC, *PTX_STA_CNT2_STRUC;
-#else
 typedef	union	_TX_STA_CNT2_STRUC	{
 	struct	{
 	    USHORT  TxZeroLenCount;
@@ -1306,28 +813,11 @@ typedef	union	_TX_STA_CNT2_STRUC	{
 	}	field;
 	UINT32			word;
 }	TX_STA_CNT2_STRUC, *PTX_STA_CNT2_STRUC;
-#endif
+
 #define TX_STA_FIFO		0x1718		//
 //
 // TX_STA_FIFO_STRUC: TX Result for specific PID status fifo register
 //
-#ifdef RT_BIG_ENDIAN
-typedef	union PACKED _TX_STA_FIFO_STRUC	{
-	struct	{
-		UINT32		Reserve:2;
-		UINT32		TxBF:1; // 3*3
-		UINT32		SuccessRate:13;	//include MCS, mode ,shortGI, BW settingSame format as TXWI Word 0 Bit 31-16.
-//		UINT32		SuccessRate:16;	//include MCS, mode ,shortGI, BW settingSame format as TXWI Word 0 Bit 31-16.
-		UINT32		wcid:8;		//wireless client index
-		UINT32       	TxAckRequired:1;    // ack required
-		UINT32       	TxAggre:1;    // Tx is aggregated
-		UINT32       	TxSuccess:1;   // Tx success. whether success or not
-		UINT32       	PidType:4;
-		UINT32       	bValid:1;   // 1:This register contains a valid TX result
-	}	field;
-	UINT32			word;
-}	TX_STA_FIFO_STRUC, *PTX_STA_FIFO_STRUC;
-#else
 typedef	union PACKED _TX_STA_FIFO_STRUC	{
 	struct	{
 		UINT32       	bValid:1;   // 1:This register contains a valid TX result
@@ -1343,18 +833,9 @@ typedef	union PACKED _TX_STA_FIFO_STRUC	{
 	}	field;
 	UINT32			word;
 }	TX_STA_FIFO_STRUC, *PTX_STA_FIFO_STRUC;
-#endif
+
 // Debug counter
 #define TX_AGG_CNT	0x171c
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_AGG_CNT_STRUC	{
-	struct	{
-	    USHORT  AggTxCount;
-	    USHORT  NonAggTxCount;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT_STRUC, *PTX_AGG_CNT_STRUC;
-#else
 typedef	union	_TX_AGG_CNT_STRUC	{
 	struct	{
 	    USHORT  NonAggTxCount;
@@ -1362,18 +843,9 @@ typedef	union	_TX_AGG_CNT_STRUC	{
 	}	field;
 	UINT32			word;
 }	TX_AGG_CNT_STRUC, *PTX_AGG_CNT_STRUC;
-#endif
+
 // Debug counter
 #define TX_AGG_CNT0	0x1720
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_AGG_CNT0_STRUC	{
-	struct	{
-	    USHORT  AggSize2Count;
-	    USHORT  AggSize1Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT0_STRUC, *PTX_AGG_CNT0_STRUC;
-#else
 typedef	union	_TX_AGG_CNT0_STRUC	{
 	struct	{
 	    USHORT  AggSize1Count;
@@ -1381,18 +853,9 @@ typedef	union	_TX_AGG_CNT0_STRUC	{
 	}	field;
 	UINT32			word;
 }	TX_AGG_CNT0_STRUC, *PTX_AGG_CNT0_STRUC;
-#endif
+
 // Debug counter
 #define TX_AGG_CNT1	0x1724
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_AGG_CNT1_STRUC	{
-	struct	{
-	    USHORT  AggSize4Count;
-	    USHORT  AggSize3Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT1_STRUC, *PTX_AGG_CNT1_STRUC;
-#else
 typedef	union	_TX_AGG_CNT1_STRUC	{
 	struct	{
 	    USHORT  AggSize3Count;
@@ -1400,17 +863,8 @@ typedef	union	_TX_AGG_CNT1_STRUC	{
 	}	field;
 	UINT32			word;
 }	TX_AGG_CNT1_STRUC, *PTX_AGG_CNT1_STRUC;
-#endif
+
 #define TX_AGG_CNT2	0x1728
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_AGG_CNT2_STRUC	{
-	struct	{
-	    USHORT  AggSize6Count;
-	    USHORT  AggSize5Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT2_STRUC, *PTX_AGG_CNT2_STRUC;
-#else
 typedef	union	_TX_AGG_CNT2_STRUC	{
 	struct	{
 	    USHORT  AggSize5Count;
@@ -1418,18 +872,9 @@ typedef	union	_TX_AGG_CNT2_STRUC	{
 	}	field;
 	UINT32			word;
 }	TX_AGG_CNT2_STRUC, *PTX_AGG_CNT2_STRUC;
-#endif
+
 // Debug counter
 #define TX_AGG_CNT3	0x172c
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_AGG_CNT3_STRUC	{
-	struct	{
-	    USHORT  AggSize8Count;
-	    USHORT  AggSize7Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT3_STRUC, *PTX_AGG_CNT3_STRUC;
-#else
 typedef	union	_TX_AGG_CNT3_STRUC	{
 	struct	{
 	    USHORT  AggSize7Count;
@@ -1437,18 +882,9 @@ typedef	union	_TX_AGG_CNT3_STRUC	{
 	}	field;
 	UINT32			word;
 }	TX_AGG_CNT3_STRUC, *PTX_AGG_CNT3_STRUC;
-#endif
+
 // Debug counter
 #define TX_AGG_CNT4	0x1730
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_AGG_CNT4_STRUC	{
-	struct	{
-	    USHORT  AggSize10Count;
-	    USHORT  AggSize9Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT4_STRUC, *PTX_AGG_CNT4_STRUC;
-#else
 typedef	union	_TX_AGG_CNT4_STRUC	{
 	struct	{
 	    USHORT  AggSize9Count;
@@ -1456,17 +892,8 @@ typedef	union	_TX_AGG_CNT4_STRUC	{
 	}	field;
 	UINT32			word;
 }	TX_AGG_CNT4_STRUC, *PTX_AGG_CNT4_STRUC;
-#endif
+
 #define TX_AGG_CNT5	0x1734
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_AGG_CNT5_STRUC	{
-	struct	{
-	    USHORT  AggSize12Count;
-	    USHORT  AggSize11Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT5_STRUC, *PTX_AGG_CNT5_STRUC;
-#else
 typedef	union	_TX_AGG_CNT5_STRUC	{
 	struct	{
 	    USHORT  AggSize11Count;
@@ -1474,17 +901,8 @@ typedef	union	_TX_AGG_CNT5_STRUC	{
 	}	field;
 	UINT32			word;
 }	TX_AGG_CNT5_STRUC, *PTX_AGG_CNT5_STRUC;
-#endif
+
 #define TX_AGG_CNT6		0x1738
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_AGG_CNT6_STRUC	{
-	struct	{
-	    USHORT  AggSize14Count;
-	    USHORT  AggSize13Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT6_STRUC, *PTX_AGG_CNT6_STRUC;
-#else
 typedef	union	_TX_AGG_CNT6_STRUC	{
 	struct	{
 	    USHORT  AggSize13Count;
@@ -1492,17 +910,8 @@ typedef	union	_TX_AGG_CNT6_STRUC	{
 	}	field;
 	UINT32			word;
 }	TX_AGG_CNT6_STRUC, *PTX_AGG_CNT6_STRUC;
-#endif
+
 #define TX_AGG_CNT7		0x173c
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_AGG_CNT7_STRUC	{
-	struct	{
-	    USHORT  AggSize16Count;
-	    USHORT  AggSize15Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT7_STRUC, *PTX_AGG_CNT7_STRUC;
-#else
 typedef	union	_TX_AGG_CNT7_STRUC	{
 	struct	{
 	    USHORT  AggSize15Count;
@@ -1510,17 +919,8 @@ typedef	union	_TX_AGG_CNT7_STRUC	{
 	}	field;
 	UINT32			word;
 }	TX_AGG_CNT7_STRUC, *PTX_AGG_CNT7_STRUC;
-#endif
+
 #define MPDU_DENSITY_CNT		0x1740
-#ifdef RT_BIG_ENDIAN
-typedef	union	_MPDU_DEN_CNT_STRUC	{
-	struct	{
-	    USHORT  RXZeroDelCount;	//RX zero length delimiter count
-	    USHORT  TXZeroDelCount;	//TX zero length delimiter count
-	}	field;
-	UINT32			word;
-}	MPDU_DEN_CNT_STRUC, *PMPDU_DEN_CNT_STRUC;
-#else
 typedef	union	_MPDU_DEN_CNT_STRUC	{
 	struct	{
 	    USHORT  TXZeroDelCount;	//TX zero length delimiter count
@@ -1528,7 +928,7 @@ typedef	union	_MPDU_DEN_CNT_STRUC	{
 	}	field;
 	UINT32			word;
 }	MPDU_DEN_CNT_STRUC, *PMPDU_DEN_CNT_STRUC;
-#endif
+
 //
 // TXRX control registers - base address 0x3000
 //
@@ -1554,30 +954,6 @@ typedef	union	_MPDU_DEN_CNT_STRUC	{
 #define SHAREDKEYTABLE			0
 #define PAIRWISEKEYTABLE			1
 
-
-#ifdef RT_BIG_ENDIAN
-typedef	union	_SHAREDKEY_MODE_STRUC	{
-	struct	{
-		UINT32       :1;
-		UINT32       Bss1Key3CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss1Key2CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss1Key1CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss1Key0CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss0Key3CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss0Key2CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss0Key1CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss0Key0CipherAlg:3;
-	}	field;
-	UINT32			word;
-}	SHAREDKEY_MODE_STRUC, *PSHAREDKEY_MODE_STRUC;
-#else
 typedef	union	_SHAREDKEY_MODE_STRUC	{
 	struct	{
 		UINT32       Bss0Key0CipherAlg:3;
@@ -1599,7 +975,7 @@ typedef	union	_SHAREDKEY_MODE_STRUC	{
 	}	field;
 	UINT32			word;
 }	SHAREDKEY_MODE_STRUC, *PSHAREDKEY_MODE_STRUC;
-#endif
+
 // 64-entry for pairwise key table
 typedef struct _HW_WCID_ENTRY {  // 8-byte per entry
     UCHAR   Address[6];
@@ -1670,10 +1046,16 @@ typedef struct _HW_WCID_ENTRY {  // 8-byte per entry
 #define E2PROM_CSR          0x0004
 #define IO_CNTL_CSR         0x77d0
 
+#ifdef RT2860
 // 8051 firmware image for RT2860 - base address = 0x4000
 #define FIRMWARE_IMAGE_BASE     0x2000
 #define MAX_FIRMWARE_IMAGE_SIZE 0x2000    // 8kbyte
-
+#endif
+#ifdef RT2870
+// 8051 firmware image for usb - use last-half base address = 0x3000
+#define FIRMWARE_IMAGE_BASE     0x3000
+#define MAX_FIRMWARE_IMAGE_SIZE 0x1000    // 4kbyte
+#endif // RT2870 //
 
 // ================================================================
 // Tx /	Rx / Mgmt ring descriptor definition
@@ -1754,6 +1136,9 @@ typedef struct _HW_WCID_ENTRY {  // 8-byte per entry
 #define BBP_R22                     22
 #define BBP_R24                     24
 #define BBP_R25                     25
+#ifdef RT30xx
+#define BBP_R31                     31
+#endif
 #define BBP_R49                     49 //TSSI
 #define BBP_R50                     50
 #define BBP_R51                     51
@@ -1771,6 +1156,10 @@ typedef struct _HW_WCID_ENTRY {  // 8-byte per entry
 #define BBP_R73                     73
 #define BBP_R75						75
 #define BBP_R77                     77
+#ifdef RT30xx
+#define BBP_R79                     79
+#define BBP_R80                     80
+#endif
 #define BBP_R81                     81
 #define BBP_R82                     82
 #define BBP_R83                     83
@@ -1792,6 +1181,9 @@ typedef struct _HW_WCID_ENTRY {  // 8-byte per entry
 #define BBP_R121                    121
 #define BBP_R122                    122
 #define BBP_R123                    123
+#ifdef RT30xx
+#define BBP_R138                    138 // add by johnli, RF power sequence setup, ADC dynamic on/off control
+#endif // RT30xx //
 
 
 #define BBPR94_DEFAULT              0x06 // Add 1 value will gain 1db
@@ -1872,15 +1264,6 @@ typedef struct _HW_KEY_ENTRY {          // 32-byte per entry
 //8.1.2	IV/EIV  format  : 2DW
 
 //8.1.3	RX attribute entry format  : 1DW
-#ifdef RT_BIG_ENDIAN
-typedef	struct	_MAC_ATTRIBUTE_STRUC {
-	UINT32		rsv:22;
-	UINT32		RXWIUDF:3;
-	UINT32		BSSIDIdx:3; //multipleBSS index for the WCID
-	UINT32		PairKeyMode:3;
-	UINT32		KeyTab:1;	// 0 for shared key table.  1 for pairwise key table
-}	MAC_ATTRIBUTE_STRUC, *PMAC_ATTRIBUTE_STRUC;
-#else
 typedef	struct	_MAC_ATTRIBUTE_STRUC {
 	UINT32		KeyTab:1;	// 0 for shared key table.  1 for pairwise key table
 	UINT32		PairKeyMode:3;
@@ -1888,8 +1271,6 @@ typedef	struct	_MAC_ATTRIBUTE_STRUC {
 	UINT32		RXWIUDF:3;
 	UINT32		rsv:22;
 }	MAC_ATTRIBUTE_STRUC, *PMAC_ATTRIBUTE_STRUC;
-#endif
-
 
 // =================================================================================
 // TX / RX ring descriptor format
@@ -1904,29 +1285,6 @@ typedef	struct	_MAC_ATTRIBUTE_STRUC {
 //
 // TX descriptor format, Tx	ring, Mgmt Ring
 //
-#ifdef RT_BIG_ENDIAN
-typedef	struct	PACKED _TXD_STRUC {
-	// Word 0
-	UINT32		SDPtr0;
-	// Word 1
-	UINT32		DMADONE:1;
-	UINT32		LastSec0:1;
-	UINT32		SDLen0:14;
-	UINT32		Burst:1;
-	UINT32		LastSec1:1;
-	UINT32		SDLen1:14;
-	// Word 2
-	UINT32		SDPtr1;
-	// Word 3
-	UINT32		ICO:1;
-	UINT32		UCO:1;
-	UINT32		TCO:1;
-	UINT32		rsv:2;
-	UINT32		QSEL:2;	// select on-chip FIFO ID for 2nd-stage output scheduler.0:MGMT, 1:HCCA 2:EDCA
-	UINT32		WIV:1;	// Wireless Info Valid. 1 if Driver already fill WI,  o if DMA needs to copy WI to correctposition
-	UINT32		rsv2:24;
-}	TXD_STRUC, *PTXD_STRUC;
-#else
 typedef	struct	PACKED _TXD_STRUC {
 	// Word	0
 	UINT32		SDPtr0;
@@ -1948,8 +1306,6 @@ typedef	struct	PACKED _TXD_STRUC {
 	UINT32		UCO:1;	//
 	UINT32		ICO:1;	//
 }	TXD_STRUC, *PTXD_STRUC;
-#endif
-
 
 //
 // TXD Wireless Information format for Tx ring and Mgmt Ring
@@ -1957,40 +1313,6 @@ typedef	struct	PACKED _TXD_STRUC {
 //txop : for txop mode
 // 0:txop for the MPDU frame will be handles by ASIC by register
 // 1/2/3:the MPDU frame is send after PIFS/backoff/SIFS
-#ifdef RT_BIG_ENDIAN
-typedef	struct	PACKED _TXWI_STRUC {
-	// Word 0
-	UINT32		PHYMODE:2;
-	UINT32		TxBF:1;	// 3*3
-	UINT32		rsv2:1;
-	UINT32		Ifs:1;	//
-	UINT32		STBC:2;	//channel bandwidth 20MHz or 40 MHz
-	UINT32		ShortGI:1;
-	UINT32		BW:1;	//channel bandwidth 20MHz or 40 MHz
-	UINT32		MCS:7;
-
-	UINT32		rsv:6;
-	UINT32		txop:2;	//tx back off mode 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs only when previous frame exchange is successful.
-	UINT32		MpduDensity:3;
-	UINT32		AMPDU:1;
-
-	UINT32		TS:1;
-	UINT32		CFACK:1;
-	UINT32		MIMOps:1;	// the remote peer is in dynamic MIMO-PS mode
-	UINT32		FRAG:1;		// 1 to inform TKIP engine this is a fragment.
-	// Word 1
-	UINT32		PacketId:4;
-	UINT32		MPDUtotalByteCount:12;
-	UINT32		WirelessCliID:8;
-	UINT32		BAWinSize:6;
-	UINT32		NSEQ:1;
-	UINT32		ACK:1;
-	// Word 2
-	UINT32		IV;
-	// Word 3
-	UINT32		EIV;
-}	TXWI_STRUC, *PTXWI_STRUC;
-#else
 typedef	struct	PACKED _TXWI_STRUC {
 	// Word	0
 	UINT32		FRAG:1;		// 1 to inform TKIP engine this is a fragment.
@@ -2023,45 +1345,11 @@ typedef	struct	PACKED _TXWI_STRUC {
 	//Word3
 	UINT32		EIV;
 }	TXWI_STRUC, *PTXWI_STRUC;
-#endif
+
 //
 // Rx descriptor format, Rx	Ring
 //
-#ifdef RT_BIG_ENDIAN
-typedef	struct	PACKED _RXD_STRUC	{
-	// Word 0
-	UINT32		SDP0;
-	// Word 1
-	UINT32		DDONE:1;
-	UINT32		LS0:1;
-	UINT32		SDL0:14;
-	UINT32		Rsv:2;
-	UINT32		SDL1:14;
-	// Word 2
-	UINT32		SDP1;
-	// Word 3
-	UINT32		Rsv1:13;
-	UINT32		PlcpRssil:1;// To be moved
-	UINT32		PlcpSignal:1;		// To be moved
-	UINT32		Decrypted:1;	// this frame is being decrypted.
-	UINT32		AMPDU:1;
-	UINT32		L2PAD:1;
-	UINT32		RSSI:1;
-	UINT32		HTC:1;
-	UINT32		AMSDU:1;		// rx with 802.3 header, not 802.11 header. obsolete.
-	UINT32		CipherErr:2;        // 0: decryption okay, 1:ICV error, 2:MIC error, 3:KEY not valid
-	UINT32		Crc:1;              // 1: CRC error
-	UINT32		MyBss:1;  	// 1: this frame belongs to the same BSSID
-	UINT32		Bcast:1;            // 1: this is a broadcast frame
-	UINT32		Mcast:1;            // 1: this is a multicast frame
-	UINT32		U2M:1;              // 1: this RX frame is unicast to me
-	UINT32		FRAG:1;
-	UINT32		NULLDATA:1;
-	UINT32		DATA:1;
-	UINT32		BA:1;
-
-}	RXD_STRUC, *PRXD_STRUC, RT28XX_RXD_STRUC, *PRT28XX_RXD_STRUC;
-#else
+#ifdef RT2860
 typedef	struct	PACKED _RXD_STRUC	{
 	// Word	0
 	UINT32		SDP0;
@@ -2094,39 +1382,11 @@ typedef	struct	PACKED _RXD_STRUC	{
 	UINT32		PlcpRssil:1;// To be moved
 	UINT32		Rsv1:13;
 }	RXD_STRUC, *PRXD_STRUC, RT28XX_RXD_STRUC, *PRT28XX_RXD_STRUC;
-#endif
+#endif /* RT2860 */
+
 //
 // RXWI wireless information format, in PBF. invisible in driver.
 //
-#ifdef RT_BIG_ENDIAN
-typedef	struct	PACKED _RXWI_STRUC {
-	// Word 0
-	UINT32		TID:4;
-	UINT32		MPDUtotalByteCount:12;
-	UINT32		UDF:3;
-	UINT32		BSSID:3;
-	UINT32		KeyIndex:2;
-	UINT32		WirelessCliID:8;
-	// Word 1
-	UINT32		PHYMODE:2;              // 1: this RX frame is unicast to me
-	UINT32		rsv:3;
-	UINT32		STBC:2;
-	UINT32		ShortGI:1;
-	UINT32		BW:1;
-	UINT32		MCS:7;
-	UINT32		SEQUENCE:12;
-	UINT32		FRAG:4;
-	// Word 2
-	UINT32		rsv1:8;
-	UINT32		RSSI2:8;
-	UINT32		RSSI1:8;
-	UINT32		RSSI0:8;
-	// Word 3
-	UINT32		rsv2:16;
-	UINT32		SNR1:8;
-	UINT32		SNR0:8;
-}	RXWI_STRUC, *PRXWI_STRUC;
-#else
 typedef	struct	PACKED _RXWI_STRUC {
 	// Word	0
 	UINT32		WirelessCliID:8;
@@ -2154,8 +1414,6 @@ typedef	struct	PACKED _RXWI_STRUC {
 	UINT32		SNR1:8;
 	UINT32		rsv2:16;
 }	RXWI_STRUC, *PRXWI_STRUC;
-#endif
-
 
 // =================================================================================
 // HOST-MCU communication data structure
@@ -2164,17 +1422,6 @@ typedef	struct	PACKED _RXWI_STRUC {
 //
 // H2M_MAILBOX_CSR: Host-to-MCU Mailbox
 //
-#ifdef RT_BIG_ENDIAN
-typedef union  _H2M_MAILBOX_STRUC {
-    struct {
-        UINT32       Owner:8;
-        UINT32       CmdToken:8;    // 0xff tells MCU not to report CmdDoneInt after excuting the command
-        UINT32       HighByte:8;
-        UINT32       LowByte:8;
-    }   field;
-    UINT32           word;
-} H2M_MAILBOX_STRUC, *PH2M_MAILBOX_STRUC;
-#else
 typedef union  _H2M_MAILBOX_STRUC {
     struct {
         UINT32       LowByte:8;
@@ -2184,22 +1431,10 @@ typedef union  _H2M_MAILBOX_STRUC {
     }   field;
     UINT32           word;
 } H2M_MAILBOX_STRUC, *PH2M_MAILBOX_STRUC;
-#endif
 
 //
 // M2H_CMD_DONE_CSR: MCU-to-Host command complete indication
 //
-#ifdef RT_BIG_ENDIAN
-typedef union _M2H_CMD_DONE_STRUC {
-    struct  {
-        UINT32       CmdToken3;
-        UINT32       CmdToken2;
-        UINT32       CmdToken1;
-        UINT32       CmdToken0;
-    } field;
-    UINT32           word;
-} M2H_CMD_DONE_STRUC, *PM2H_CMD_DONE_STRUC;
-#else
 typedef union _M2H_CMD_DONE_STRUC {
     struct  {
         UINT32       CmdToken0;
@@ -2209,22 +1444,10 @@ typedef union _M2H_CMD_DONE_STRUC {
     } field;
     UINT32           word;
 } M2H_CMD_DONE_STRUC, *PM2H_CMD_DONE_STRUC;
-#endif
-
-
 
 //
 // MCU_LEDCS: MCU LED Control Setting.
 //
-#ifdef RT_BIG_ENDIAN
-typedef union  _MCU_LEDCS_STRUC {
-	struct	{
-		UCHAR		Polarity:1;
-		UCHAR		LedMode:7;
-	} field;
-	UCHAR				word;
-} MCU_LEDCS_STRUC, *PMCU_LEDCS_STRUC;
-#else
 typedef union  _MCU_LEDCS_STRUC {
 	struct	{
 		UCHAR		LedMode:7;
@@ -2232,7 +1455,7 @@ typedef union  _MCU_LEDCS_STRUC {
 	} field;
 	UCHAR			word;
 } MCU_LEDCS_STRUC, *PMCU_LEDCS_STRUC;
-#endif
+
 // =================================================================================
 // Register format
 // =================================================================================
@@ -2240,18 +1463,6 @@ typedef union  _MCU_LEDCS_STRUC {
 
 
 //NAV_TIME_CFG :NAV
-#ifdef RT_BIG_ENDIAN
-typedef	union	_NAV_TIME_CFG_STRUC	{
-	struct	{
-		USHORT		rsv:6;
-		USHORT		ZeroSifs:1;               // Applied zero SIFS timer after OFDM RX 0: disable
-		USHORT		Eifs:9;               // in unit of 1-us
-		UCHAR       SlotTime;    // in unit of 1-us
-		UCHAR		Sifs;               // in unit of 1-us
-	}	field;
-	UINT32			word;
-}	NAV_TIME_CFG_STRUC, *PNAV_TIME_CFG_STRUC;
-#else
 typedef	union	_NAV_TIME_CFG_STRUC	{
 	struct	{
 		UCHAR		Sifs;               // in unit of 1-us
@@ -2262,44 +1473,10 @@ typedef	union	_NAV_TIME_CFG_STRUC	{
 	}	field;
 	UINT32			word;
 }	NAV_TIME_CFG_STRUC, *PNAV_TIME_CFG_STRUC;
-#endif
-
-
-
-
 
 //
 // RX_FILTR_CFG:  /RX configuration register
 //
-#ifdef RT_BIG_ENDIAN
-typedef	union	RX_FILTR_CFG_STRUC	{
-	struct	{
-		UINT32		:15;
-		UINT32       DropRsvCntlType:1;
-
-        	UINT32       	DropBAR:1;       //
-		UINT32		DropBA:1;		//
-		UINT32		DropPsPoll:1;		// Drop Ps-Poll
-		UINT32		DropRts:1;		// Drop Ps-Poll
-
-		UINT32		DropCts:1;		// Drop Ps-Poll
-		UINT32		DropAck:1;		// Drop Ps-Poll
-		UINT32		DropCFEnd:1;		// Drop Ps-Poll
-		UINT32		DropCFEndAck:1;		// Drop Ps-Poll
-
-		UINT32		DropDuplicate:1;		// Drop duplicate frame
-		UINT32		DropBcast:1;		// Drop broadcast frames
-		UINT32		DropMcast:1;		// Drop multicast frames
-		UINT32		DropVerErr:1;	    // Drop version error frame
-
-		UINT32		DropNotMyBSSID:1;			// Drop fram ToDs bit is true
-		UINT32		DropNotToMe:1;		// Drop not to me unicast frame
-		UINT32		DropPhyErr:1;		// Drop physical error
-		UINT32		DropCRCErr:1;		// Drop CRC error
-	}	field;
-	UINT32			word;
-}	RX_FILTR_CFG_STRUC, *PRX_FILTR_CFG_STRUC;
-#else
 typedef	union	_RX_FILTR_CFG_STRUC	{
 	struct	{
 		UINT32		DropCRCErr:1;		// Drop CRC error
@@ -2327,26 +1504,10 @@ typedef	union	_RX_FILTR_CFG_STRUC	{
 	}	field;
 	UINT32			word;
 }	RX_FILTR_CFG_STRUC, *PRX_FILTR_CFG_STRUC;
-#endif
-
-
-
 
 //
 // PHY_CSR4: RF serial control register
 //
-#ifdef RT_BIG_ENDIAN
-typedef	union	_PHY_CSR4_STRUC	{
-	struct	{
-		UINT32		Busy:1;				// 1: ASIC is busy execute RF programming.
-		UINT32		PLL_LD:1;			// RF PLL_LD status
-		UINT32		IFSelect:1;			// 1: select IF	to program,	0: select RF to	program
-		UINT32		NumberOfBits:5;		// Number of bits used in RFRegValue (I:20,	RFMD:22)
-		UINT32		RFRegValue:24;		// Register	value (include register	id)	serial out to RF/IF	chip.
-	}	field;
-	UINT32			word;
-}	PHY_CSR4_STRUC, *PPHY_CSR4_STRUC;
-#else
 typedef	union	_PHY_CSR4_STRUC	{
 	struct	{
 		UINT32		RFRegValue:24;		// Register	value (include register	id)	serial out to RF/IF	chip.
@@ -2357,35 +1518,10 @@ typedef	union	_PHY_CSR4_STRUC	{
 	}	field;
 	UINT32			word;
 }	PHY_CSR4_STRUC, *PPHY_CSR4_STRUC;
-#endif
-
 
 //
 // SEC_CSR5: shared key table security mode register
 //
-#ifdef RT_BIG_ENDIAN
-typedef	union	_SEC_CSR5_STRUC	{
-	struct	{
-        UINT32       :1;
-        UINT32       Bss3Key3CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss3Key2CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss3Key1CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss3Key0CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss2Key3CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss2Key2CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss2Key1CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss2Key0CipherAlg:3;
-	}	field;
-	UINT32			word;
-}	SEC_CSR5_STRUC, *PSEC_CSR5_STRUC;
-#else
 typedef	union	_SEC_CSR5_STRUC	{
 	struct	{
         UINT32       Bss2Key0CipherAlg:3;
@@ -2407,21 +1543,10 @@ typedef	union	_SEC_CSR5_STRUC	{
 	}	field;
 	UINT32			word;
 }	SEC_CSR5_STRUC, *PSEC_CSR5_STRUC;
-#endif
-
 
 //
 // HOST_CMD_CSR: For HOST to interrupt embedded processor
 //
-#ifdef RT_BIG_ENDIAN
-typedef	union	_HOST_CMD_CSR_STRUC	{
-	struct	{
-	    UINT32   Rsv:24;
-	    UINT32   HostCommand:8;
-	}	field;
-	UINT32			word;
-}	HOST_CMD_CSR_STRUC, *PHOST_CMD_CSR_STRUC;
-#else
 typedef	union	_HOST_CMD_CSR_STRUC	{
 	struct	{
 	    UINT32   HostCommand:8;
@@ -2429,8 +1554,6 @@ typedef	union	_HOST_CMD_CSR_STRUC	{
 	}	field;
 	UINT32			word;
 }	HOST_CMD_CSR_STRUC, *PHOST_CMD_CSR_STRUC;
-#endif
-
 
 //
 // AIFSN_CSR: AIFSN for each EDCA AC
@@ -2441,21 +1564,6 @@ typedef	union	_HOST_CMD_CSR_STRUC	{
 //
 // E2PROM_CSR: EEPROM control register
 //
-#ifdef RT_BIG_ENDIAN
-typedef	union	_E2PROM_CSR_STRUC	{
-	struct	{
-		UINT32		Rsvd:25;
-		UINT32       LoadStatus:1;   // 1:loading, 0:done
-		UINT32		Type:1;			// 1: 93C46, 0:93C66
-		UINT32		EepromDO:1;
-		UINT32		EepromDI:1;
-		UINT32		EepromCS:1;
-		UINT32		EepromSK:1;
-		UINT32		Reload:1;		// Reload EEPROM content, write one to reload, self-cleared.
-	}	field;
-	UINT32			word;
-}	E2PROM_CSR_STRUC, *PE2PROM_CSR_STRUC;
-#else
 typedef	union	_E2PROM_CSR_STRUC	{
 	struct	{
 		UINT32		Reload:1;		// Reload EEPROM content, write one to reload, self-cleared.
@@ -2469,8 +1577,6 @@ typedef	union	_E2PROM_CSR_STRUC	{
 	}	field;
 	UINT32			word;
 }	E2PROM_CSR_STRUC, *PE2PROM_CSR_STRUC;
-#endif
-
 
 // -------------------------------------------------------------------
 //  E2PROM data layout
@@ -2479,17 +1585,6 @@ typedef	union	_E2PROM_CSR_STRUC	{
 //
 // EEPROM antenna select format
 //
-#ifdef RT_BIG_ENDIAN
-typedef	union	_EEPROM_ANTENNA_STRUC	{
-	struct	{
-		USHORT      Rsv:4;
-		USHORT      RfIcType:4;             // see E2PROM document
-		USHORT		TxPath:4;	// 1: 1T, 2: 2T
-		USHORT		RxPath:4;	// 1: 1R, 2: 2R, 3: 3R
-	}	field;
-	USHORT			word;
-}	EEPROM_ANTENNA_STRUC, *PEEPROM_ANTENNA_STRUC;
-#else
 typedef	union	_EEPROM_ANTENNA_STRUC	{
 	struct	{
 		USHORT		RxPath:4;	// 1: 1R, 2: 2R, 3: 3R
@@ -2499,26 +1594,7 @@ typedef	union	_EEPROM_ANTENNA_STRUC	{
 	}	field;
 	USHORT			word;
 }	EEPROM_ANTENNA_STRUC, *PEEPROM_ANTENNA_STRUC;
-#endif
 
-#ifdef RT_BIG_ENDIAN
-typedef	union _EEPROM_NIC_CINFIG2_STRUC	{
-	struct	{
-        USHORT		Rsv2:6;					// must be 0
-		USHORT		BW40MAvailForA:1;			// 0:enable, 1:disable
-		USHORT		BW40MAvailForG:1;			// 0:enable, 1:disable
-		USHORT		EnableWPSPBC:1;                 // WPS PBC Control bit
-		USHORT		BW40MSidebandForA:1;
-		USHORT		BW40MSidebandForG:1;
-		USHORT		CardbusAcceleration:1;	// !!! NOTE: 0 - enable, 1 - disable
-		USHORT		ExternalLNAForA:1;			// external LNA enable for 5G
-		USHORT		ExternalLNAForG:1;			// external LNA enable for 2.4G
-		USHORT		DynamicTxAgcControl:1;			//
-		USHORT		HardwareRadioControl:1;	// Whether RF is controlled by driver or HW. 1:enable hw control, 0:disable
-	}	field;
-	USHORT			word;
-}	EEPROM_NIC_CONFIG2_STRUC, *PEEPROM_NIC_CONFIG2_STRUC;
-#else
 typedef	union _EEPROM_NIC_CINFIG2_STRUC	{
 	struct {
 		USHORT		HardwareRadioControl:1;	// 1:enable, 0:disable
@@ -2531,24 +1607,22 @@ typedef	union _EEPROM_NIC_CINFIG2_STRUC	{
 		USHORT		EnableWPSPBC:1;                 // WPS PBC Control bit
 		USHORT		BW40MAvailForG:1;			// 0:enable, 1:disable
 		USHORT		BW40MAvailForA:1;			// 0:enable, 1:disable
+#ifndef RT30xx
 		USHORT		Rsv2:6;                 // must be 0
+#endif
+#ifdef RT30xx
+		USHORT		Rsv1:1;					// must be 0
+		USHORT		AntDiversity:1;			// Antenna diversity
+		USHORT		Rsv2:3;					// must be 0
+		USHORT		DACTestBit:1;			// control if driver should patch the DAC issue
+#endif
 	}	field;
 	USHORT			word;
 }	EEPROM_NIC_CONFIG2_STRUC, *PEEPROM_NIC_CONFIG2_STRUC;
-#endif
 
 //
 // TX_PWR Value valid range 0xFA(-6) ~ 0x24(36)
 //
-#ifdef RT_BIG_ENDIAN
-typedef	union	_EEPROM_TX_PWR_STRUC	{
-	struct	{
-		CHAR	Byte1;				// High Byte
-		CHAR	Byte0;				// Low Byte
-	}	field;
-	USHORT	word;
-}	EEPROM_TX_PWR_STRUC, *PEEPROM_TX_PWR_STRUC;
-#else
 typedef	union	_EEPROM_TX_PWR_STRUC	{
 	struct	{
 		CHAR	Byte0;				// Low Byte
@@ -2556,17 +1630,7 @@ typedef	union	_EEPROM_TX_PWR_STRUC	{
 	}	field;
 	USHORT	word;
 }	EEPROM_TX_PWR_STRUC, *PEEPROM_TX_PWR_STRUC;
-#endif
 
-#ifdef RT_BIG_ENDIAN
-typedef	union	_EEPROM_VERSION_STRUC	{
-	struct	{
-		UCHAR	Version;			// High Byte
-		UCHAR	FaeReleaseNumber;	// Low Byte
-	}	field;
-	USHORT	word;
-}	EEPROM_VERSION_STRUC, *PEEPROM_VERSION_STRUC;
-#else
 typedef	union	_EEPROM_VERSION_STRUC	{
 	struct	{
 		UCHAR	FaeReleaseNumber;	// Low Byte
@@ -2574,25 +1638,7 @@ typedef	union	_EEPROM_VERSION_STRUC	{
 	}	field;
 	USHORT	word;
 }	EEPROM_VERSION_STRUC, *PEEPROM_VERSION_STRUC;
-#endif
 
-#ifdef RT_BIG_ENDIAN
-typedef	union	_EEPROM_LED_STRUC	{
-	struct	{
-		USHORT	Rsvd:3;				// Reserved
-		USHORT	LedMode:5;			// Led mode.
-		USHORT	PolarityGPIO_4:1;	// Polarity GPIO#4 setting.
-		USHORT	PolarityGPIO_3:1;	// Polarity GPIO#3 setting.
-		USHORT	PolarityGPIO_2:1;	// Polarity GPIO#2 setting.
-		USHORT	PolarityGPIO_1:1;	// Polarity GPIO#1 setting.
-		USHORT	PolarityGPIO_0:1;	// Polarity GPIO#0 setting.
-		USHORT	PolarityACT:1;		// Polarity ACT setting.
-		USHORT	PolarityRDY_A:1;		// Polarity RDY_A setting.
-		USHORT	PolarityRDY_G:1;		// Polarity RDY_G setting.
-	}	field;
-	USHORT	word;
-}	EEPROM_LED_STRUC, *PEEPROM_LED_STRUC;
-#else
 typedef	union	_EEPROM_LED_STRUC	{
 	struct	{
 		USHORT	PolarityRDY_G:1;		// Polarity RDY_G setting.
@@ -2608,18 +1654,7 @@ typedef	union	_EEPROM_LED_STRUC	{
 	}	field;
 	USHORT	word;
 }	EEPROM_LED_STRUC, *PEEPROM_LED_STRUC;
-#endif
 
-#ifdef RT_BIG_ENDIAN
-typedef	union	_EEPROM_TXPOWER_DELTA_STRUC	{
-	struct	{
-		UCHAR	TxPowerEnable:1;// Enable
-		UCHAR	Type:1;			// 1: plus the delta value, 0: minus the delta value
-		UCHAR	DeltaValue:6;	// Tx Power dalta value (MAX=4)
-	}	field;
-	UCHAR	value;
-}	EEPROM_TXPOWER_DELTA_STRUC, *PEEPROM_TXPOWER_DELTA_STRUC;
-#else
 typedef	union	_EEPROM_TXPOWER_DELTA_STRUC	{
 	struct	{
 		UCHAR	DeltaValue:6;	// Tx Power dalta value (MAX=4)
@@ -2628,22 +1663,10 @@ typedef	union	_EEPROM_TXPOWER_DELTA_STRUC	{
 	}	field;
 	UCHAR	value;
 }	EEPROM_TXPOWER_DELTA_STRUC, *PEEPROM_TXPOWER_DELTA_STRUC;
-#endif
 
 //
 // QOS_CSR0: TXOP holder address0 register
 //
-#ifdef RT_BIG_ENDIAN
-typedef	union	_QOS_CSR0_STRUC	{
-	struct	{
-		UCHAR		Byte3;		// MAC address byte 3
-		UCHAR		Byte2;		// MAC address byte 2
-		UCHAR		Byte1;		// MAC address byte 1
-		UCHAR		Byte0;		// MAC address byte 0
-	}	field;
-	UINT32			word;
-}	QOS_CSR0_STRUC, *PQOS_CSR0_STRUC;
-#else
 typedef	union	_QOS_CSR0_STRUC	{
 	struct	{
 		UCHAR		Byte0;		// MAC address byte 0
@@ -2653,22 +1676,10 @@ typedef	union	_QOS_CSR0_STRUC	{
 	}	field;
 	UINT32			word;
 }	QOS_CSR0_STRUC, *PQOS_CSR0_STRUC;
-#endif
 
 //
 // QOS_CSR1: TXOP holder address1 register
 //
-#ifdef RT_BIG_ENDIAN
-typedef	union	_QOS_CSR1_STRUC	{
-	struct	{
-		UCHAR		Rsvd1;
-		UCHAR		Rsvd0;
-		UCHAR		Byte5;		// MAC address byte 5
-		UCHAR		Byte4;		// MAC address byte 4
-	}	field;
-	UINT32			word;
-}	QOS_CSR1_STRUC, *PQOS_CSR1_STRUC;
-#else
 typedef	union	_QOS_CSR1_STRUC	{
 	struct	{
 		UCHAR		Byte4;		// MAC address byte 4
@@ -2678,22 +1689,8 @@ typedef	union	_QOS_CSR1_STRUC	{
 	}	field;
 	UINT32			word;
 }	QOS_CSR1_STRUC, *PQOS_CSR1_STRUC;
-#endif
 
 #define	RF_CSR_CFG	0x500
-#ifdef RT_BIG_ENDIAN
-typedef	union	_RF_CSR_CFG_STRUC	{
-	struct	{
-		UINT	Rsvd1:14;				// Reserved
-		UINT	RF_CSR_KICK:1;			// kick RF register read/write
-		UINT	RF_CSR_WR:1;			// 0: read  1: write
-		UINT	Rsvd2:3;				// Reserved
-		UINT	TESTCSR_RFACC_REGNUM:5;	// RF register ID
-		UINT	RF_CSR_DATA:8;			// DATA
-	}	field;
-	UINT	word;
-}	RF_CSR_CFG_STRUC, *PRF_CSR_CFG_STRUC;
-#else
 typedef	union	_RF_CSR_CFG_STRUC	{
 	struct	{
 		UINT	RF_CSR_DATA:8;			// DATA
@@ -2705,6 +1702,5 @@ typedef	union	_RF_CSR_CFG_STRUC	{
 	}	field;
 	UINT	word;
 }	RF_CSR_CFG_STRUC, *PRF_CSR_CFG_STRUC;
-#endif
 
 #endif	// __RT28XX_H__
diff --git a/drivers/staging/rt2860/rt_ate.c b/drivers/staging/rt2860/rt_ate.c
deleted file mode 100644
index 1ed73c9e6b6..00000000000
--- a/drivers/staging/rt2860/rt_ate.c
+++ /dev/null
@@ -1,6009 +0,0 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-#include "rt_config.h"
-
-#ifdef RALINK_ATE
-UCHAR TemplateFrame[24] = {0x08/* Data type */,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0xAA,0xBB,0x12,0x34,0x56,0x00,0x11,0x22,0xAA,0xBB,0xCC,0x00,0x00};	// 802.11 MAC Header, Type:Data, Length:24bytes
-extern RTMP_RF_REGS RF2850RegTable[];
-extern UCHAR NUM_OF_2850_CHNL;
-
-static CHAR CCKRateTable[] = {0, 1, 2, 3, 8, 9, 10, 11, -1}; /* CCK Mode. */
-static CHAR OFDMRateTable[] = {0, 1, 2, 3, 4, 5, 6, 7, -1}; /* OFDM Mode. */
-static CHAR HTMIXRateTable[] = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1}; /* HT Mix Mode. */
-
-static INT TxDmaBusy(
-	IN PRTMP_ADAPTER pAd);
-
-static INT RxDmaBusy(
-	IN PRTMP_ADAPTER pAd);
-
-static VOID RtmpDmaEnable(
-	IN PRTMP_ADAPTER pAd,
-	IN INT Enable);
-
-static VOID BbpSoftReset(
-	IN PRTMP_ADAPTER pAd);
-
-static VOID RtmpRfIoWrite(
-	IN PRTMP_ADAPTER pAd);
-
-static INT ATESetUpFrame(
-	IN PRTMP_ADAPTER pAd,
-	IN UINT32 TxIdx);
-
-static INT ATETxPwrHandler(
-	IN PRTMP_ADAPTER pAd,
-	IN char index);
-
-static INT ATECmdHandler(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-static int CheckMCSValid(
-	IN UCHAR Mode,
-	IN UCHAR Mcs);
-
-static VOID ATEWriteTxWI(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PTXWI_STRUC 	pOutTxWI,
-	IN	BOOLEAN			FRAG,
-	IN	BOOLEAN			CFACK,
-	IN	BOOLEAN			InsTimestamp,
-	IN	BOOLEAN 		AMPDU,
-	IN	BOOLEAN 		Ack,
-	IN	BOOLEAN 		NSeq,		// HW new a sequence.
-	IN	UCHAR			BASize,
-	IN	UCHAR			WCID,
-	IN	ULONG			Length,
-	IN	UCHAR 			PID,
-	IN	UCHAR			TID,
-	IN	UCHAR			TxRate,
-	IN	UCHAR			Txopmode,
-	IN	BOOLEAN			CfAck,
-	IN	HTTRANSMIT_SETTING	*pTransmit);
-
-
-static VOID SetJapanFilter(
-	IN	PRTMP_ADAPTER	pAd);
-
-/*=========================end of prototype=========================*/
-
-static INT TxDmaBusy(
-	IN PRTMP_ADAPTER pAd)
-{
-	INT result;
-	WPDMA_GLO_CFG_STRUC GloCfg;
-
-	RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &GloCfg.word);	// disable DMA
-	if (GloCfg.field.TxDMABusy)
-		result = 1;
-	else
-		result = 0;
-
-	return result;
-}
-
-static INT RxDmaBusy(
-	IN PRTMP_ADAPTER pAd)
-{
-	INT result;
-	WPDMA_GLO_CFG_STRUC GloCfg;
-
-	RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &GloCfg.word);	// disable DMA
-	if (GloCfg.field.RxDMABusy)
-		result = 1;
-	else
-		result = 0;
-
-	return result;
-}
-
-static VOID RtmpDmaEnable(
-	IN PRTMP_ADAPTER pAd,
-	IN INT Enable)
-{
-	BOOLEAN value;
-	ULONG WaitCnt;
-	WPDMA_GLO_CFG_STRUC GloCfg;
-
-	value = Enable > 0 ? 1 : 0;
-
-	// check DMA is in busy mode.
-	WaitCnt = 0;
-	while (TxDmaBusy(pAd) || RxDmaBusy(pAd))
-	{
-		RTMPusecDelay(10);
-		if (WaitCnt++ > 100)
-			break;
-	}
-
-	RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &GloCfg.word);	// disable DMA
-	GloCfg.field.EnableTxDMA = value;
-	GloCfg.field.EnableRxDMA = value;
-	RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, GloCfg.word);	// abort all TX rings
-	RTMPusecDelay(5000);
-
-	return;
-}
-
-
-static VOID BbpSoftReset(
-	IN PRTMP_ADAPTER pAd)
-{
-	UCHAR BbpData = 0;
-
-	// Soft reset, set BBP R21 bit0=1->0
-	ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R21, &BbpData);
-	BbpData |= 0x00000001; //set bit0=1
-	ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R21, BbpData);
-
-	ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R21, &BbpData);
-	BbpData &= ~(0x00000001); //set bit0=0
-	ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R21, BbpData);
-
-	return;
-}
-
-static VOID RtmpRfIoWrite(
-	IN PRTMP_ADAPTER pAd)
-{
-	// Set RF value 1's set R3[bit2] = [0]
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1);
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2);
-	RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 & (~0x04)));
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4);
-
-	RTMPusecDelay(200);
-
-	// Set RF value 2's set R3[bit2] = [1]
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1);
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2);
-	RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 | 0x04));
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4);
-
-	RTMPusecDelay(200);
-
-	// Set RF value 3's set R3[bit2] = [0]
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1);
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2);
-	RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 & (~0x04)));
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4);
-
-	return;
-}
-
-static int CheckMCSValid(
-	UCHAR Mode,
-	UCHAR Mcs)
-{
-	int i;
-	PCHAR pRateTab;
-
-	switch(Mode)
-	{
-		case 0:
-			pRateTab = CCKRateTable;
-			break;
-		case 1:
-			pRateTab = OFDMRateTable;
-			break;
-		case 2:
-		case 3:
-			pRateTab = HTMIXRateTable;
-			break;
-		default:
-			ATEDBGPRINT(RT_DEBUG_ERROR, ("unrecognizable Tx Mode %d\n", Mode));
-			return -1;
-			break;
-	}
-
-	i = 0;
-	while(pRateTab[i] != -1)
-	{
-		if (pRateTab[i] == Mcs)
-			return 0;
-		i++;
-	}
-
-	return -1;
-}
-
-#if 1
-static INT ATETxPwrHandler(
-	IN PRTMP_ADAPTER pAd,
-	IN char index)
-{
-	ULONG R;
-	CHAR TxPower;
-	UCHAR Bbp94 = 0;
-	BOOLEAN bPowerReduce = FALSE;
-
-#ifdef RALINK_28xx_QA
-	if ((pAd->ate.bQATxStart == TRUE) || (pAd->ate.bQARxStart == TRUE))
-	{
-		/* When QA is used for Tx, pAd->ate.TxPower0/1 and real tx power
-		** are not synchronized.
-		*/
-/*
-		pAd->ate.TxPower0 = pAd->LatchRfRegs.xxx;
-		pAd->ate.TxPower1 = pAd->LatchRfRegs.xxx;
-*/
-		return 0;
-	}
-	else
-#endif // RALINK_28xx_QA //
-	{
-		TxPower = index == 0 ? pAd->ate.TxPower0 : pAd->ate.TxPower1;
-
-		if (pAd->ate.Channel <= 14)
-		{
-			if (TxPower > 31)
-			{
-				//
-				// R3, R4 can't large than 31 (0x24), 31 ~ 36 used by BBP 94
-				//
-				R = 31;
-				if (TxPower <= 36)
-					Bbp94 = BBPR94_DEFAULT + (UCHAR)(TxPower - 31);
-			}
-			else if (TxPower < 0)
-			{
-				//
-				// R3, R4 can't less than 0, -1 ~ -6 used by BBP 94
-				//
-				R = 0;
-				if (TxPower >= -6)
-					Bbp94 = BBPR94_DEFAULT + TxPower;
-			}
-			else
-			{
-				// 0 ~ 31
-				R = (ULONG) TxPower;
-				Bbp94 = BBPR94_DEFAULT;
-			}
-
-			ATEDBGPRINT(RT_DEBUG_TRACE, ("%s (TxPower=%d, R=%ld, BBP_R94=%d)\n", __func__, TxPower, R, Bbp94));
-		}
-		else// 5.5 GHz
-		{
-			if (TxPower > 15)
-			{
-				//
-				// R3, R4 can't large than 15 (0x0F)
-				//
-				R = 15;
-			}
-			else if (TxPower < 0)
-			{
-				//
-				// R3, R4 can't less than 0
-				//
-				// -1 ~ -7
-				ASSERT((TxPower >= -7));
-				R = (ULONG)(TxPower + 7);
-				bPowerReduce = TRUE;
-			}
-			else
-			{
-				// 0 ~ 15
-				R = (ULONG) TxPower;
-			}
-
-			ATEDBGPRINT(RT_DEBUG_TRACE, ("%s (TxPower=%d, R=%lu)\n", __func__, TxPower, R));
-		}
-
-		if (pAd->ate.Channel <= 14)
-		{
-			if (index == 0)
-			{
-				R = R << 9;		// shift TX power control to correct RF(R3) register bit position
-				R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
-				pAd->LatchRfRegs.R3 = R;
-			}
-			else
-			{
-				R = R << 6;		// shift TX power control to correct RF(R4) register bit position
-				R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
-				pAd->LatchRfRegs.R4 = R;
-			}
-		}
-		else// 5.5GHz
-		{
-			if (bPowerReduce == FALSE)
-			{
-				if (index == 0)
-				{
-					R = (R << 10) | (1 << 9);		// shift TX power control to correct RF(R3) register bit position
-					R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
-					pAd->LatchRfRegs.R3 = R;
-				}
-				else
-				{
-					R = (R << 7) | (1 << 6);		// shift TX power control to correct RF(R4) register bit position
-					R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
-					pAd->LatchRfRegs.R4 = R;
-				}
-			}
-			else
-			{
-				if (index == 0)
-				{
-					R = (R << 10);		// shift TX power control to correct RF(R3) register bit position
-					R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
-
-					/* Clear bit 9 of R3 to reduce 7dB. */
-					pAd->LatchRfRegs.R3 = (R & (~(1 << 9)));
-				}
-				else
-				{
-					R = (R << 7);		// shift TX power control to correct RF(R4) register bit position
-					R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
-
-					/* Clear bit 6 of R4 to reduce 7dB. */
-					pAd->LatchRfRegs.R4 = (R & (~(1 << 6)));
-				}
-			}
-		}
-
-		RtmpRfIoWrite(pAd);
-
-		return 0;
-	}
-}
-#else// 1 //
-static INT ATETxPwrHandler(
-	IN PRTMP_ADAPTER pAd,
-	IN char index)
-{
-	ULONG R;
-	CHAR TxPower;
-	UCHAR Bbp94 = 0;
-
-#ifdef RALINK_28xx_QA
-	if ((pAd->ate.bQATxStart == TRUE) || (pAd->ate.bQARxStart == TRUE))
-	{
-		// TODO: how to get current TxPower0/1 from pAd->LatchRfRegs ?
-		/* When QA is used for Tx, pAd->ate.TxPower0/1 and real tx power
-		** are not synchronized.
-		*/
-/*
-		pAd->ate.TxPower0 = pAd->LatchRfRegs.xxx;
-		pAd->ate.TxPower1 = pAd->LatchRfRegs.xxx;
-*/
-		return 0;
-	}
-	else
-#endif // RALINK_28xx_QA //
-	{
-		TxPower = index == 0 ? pAd->ate.TxPower0 : pAd->ate.TxPower1;
-
-	if (TxPower > 31)
-	{
-		//
-		// R3, R4 can't large than 36 (0x24), 31 ~ 36 used by BBP 94
-		//
-		R = 31;
-		if (TxPower <= 36)
-			Bbp94 = BBPR94_DEFAULT + (UCHAR)(TxPower - 31);
-	}
-	else if (TxPower < 0)
-	{
-		//
-		// R3, R4 can't less than 0, -1 ~ -6 used by BBP 94
-		//
-		R = 0;
-		if (TxPower >= -6)
-			Bbp94 = BBPR94_DEFAULT + TxPower;
-	}
-	else
-	{
-		// 0 ~ 31
-		R = (ULONG) TxPower;
-		Bbp94 = BBPR94_DEFAULT;
-	}
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("%s (TxPower=%d, R3=%ld, BBP_R94=%d)\n", __func__, TxPower, R, Bbp94));
-
-		if (pAd->ate.Channel <= 14)
-		{
-	if (index == 0)
-	{
-		R = R << 9;		// shift TX power control to correct RF(R3) register bit position
-		R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
-		pAd->LatchRfRegs.R3 = R;
-	}
-	else
-	{
-		R = R << 6;		// shift TX power control to correct RF(R4) register bit position
-		R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
-		pAd->LatchRfRegs.R4 = R;
-	}
-		}
-		else
-		{
-			if (index == 0)
-			{
-				R = (R << 10) | (1 << 9);		// shift TX power control to correct RF(R3) register bit position
-				R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
-				pAd->LatchRfRegs.R3 = R;
-			}
-			else
-			{
-				R = (R << 7) | (1 << 6);		// shift TX power control to correct RF(R4) register bit position
-				R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
-				pAd->LatchRfRegs.R4 = R;
-			}
-		}
-
-	RtmpRfIoWrite(pAd);
-
-	return 0;
-	}
-}
-#endif // 1 //
-/*
-    ==========================================================================
-    Description:
-        Set ATE operation mode to
-        0. ATESTART  = Start ATE Mode
-        1. ATESTOP   = Stop ATE Mode
-        2. TXCONT    = Continuous Transmit
-        3. TXCARR    = Transmit Carrier
-        4. TXFRAME   = Transmit Frames
-        5. RXFRAME   = Receive Frames
-#ifdef RALINK_28xx_QA
-        6. TXSTOP    = Stop Any Type of Transmition
-        7. RXSTOP    = Stop Receiving Frames
-#endif // RALINK_28xx_QA //
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-static INT	ATECmdHandler(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UINT32			Value = 0;
-	UCHAR			BbpData;
-	UINT32			MacData = 0;
-	PTXD_STRUC		pTxD;
-	INT				index;
-	UINT			i=0, atemode;
-	PRXD_STRUC		pRxD;
-	PRTMP_TX_RING 	pTxRing = &pAd->TxRing[QID_AC_BE];
-#ifndef UCOS
-	NDIS_STATUS		Status = NDIS_STATUS_SUCCESS;
-#endif // UCOS //
-#ifdef	RT_BIG_ENDIAN
-    PTXD_STRUC      pDestTxD;
-    TXD_STRUC       TxD;
-#endif
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("===> ATECmdHandler()\n"));
-
-	ATEAsicSwitchChannel(pAd);
-	AsicLockChannel(pAd, pAd->ate.Channel);
-
-	RTMPusecDelay(5000);
-
-	// read MAC_SYS_CTRL and backup MAC_SYS_CTRL value.
-	RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
-
-	// Default value in BBP R22 is 0x0.
-	BbpData = 0;
-
-	// clean bit4 to stop continuous Tx production test.
-	MacData &= 0xFFFFFFEF;
-
-	if (!strcmp(arg, "ATESTART")) 		//Enter ATE mode and set Tx/Rx Idle
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: ATESTART\n"));
-
-#ifndef UCOS
-		// check if we have removed the firmware
-		if (!(ATE_ON(pAd)))
-		{
-			NICEraseFirmware(pAd);
-		}
-#endif // !UCOS //
-		atemode = pAd->ate.Mode;
-		pAd->ate.Mode = ATE_START;
-//		pAd->ate.TxDoneCount = pAd->ate.TxCount;
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
-
-		if (atemode & ATE_TXCARR)
-		{
-			// No Carrier Test set BBP R22 bit7=0, bit6=0, bit[5~0]=0x0
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-			BbpData &= 0xFFFFFF00; //clear bit7, bit6, bit[5~0]
-		    ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-		}
-		else if (atemode & ATE_TXCARRSUPP)
-		{
-			// No Cont. TX set BBP R22 bit7=0
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-			BbpData &= ~(1 << 7); //set bit7=0
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-
-			// No Carrier Suppression set BBP R24 bit0=0
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R24, &BbpData);
-			BbpData &= 0xFFFFFFFE; //clear bit0
-		    ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, BbpData);
-		}
-		// We should free some resource which was allocated when ATE_TXFRAME , ATE_STOP, and ATE_TXCONT.
-		else if ((atemode & ATE_TXFRAME) || (atemode == ATE_STOP))
-		{
-			PRTMP_TX_RING pTxRing = &pAd->TxRing[QID_AC_BE];
-
-			if (atemode & ATE_TXCONT)
-			{
-				// No Cont. TX set BBP R22 bit7=0
-				ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-				BbpData &= ~(1 << 7); //set bit7=0
-				ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-			}
-			// Abort Tx, Rx DMA.
-			RtmpDmaEnable(pAd, 0);
-			for (i=0; i<TX_RING_SIZE; i++)
-			{
-				PNDIS_PACKET  pPacket;
-
-#ifndef RT_BIG_ENDIAN
-			    pTxD = (PTXD_STRUC)pAd->TxRing[QID_AC_BE].Cell[i].AllocVa;
-#else
-        		pDestTxD = (PTXD_STRUC)pAd->TxRing[QID_AC_BE].Cell[i].AllocVa;
-        		TxD = *pDestTxD;
-        		pTxD = &TxD;
-        		RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-#endif
-				pTxD->DMADONE = 0;
-				pPacket = pTxRing->Cell[i].pNdisPacket;
-				if (pPacket)
-				{
-					PCI_UNMAP_SINGLE(pAd, pTxD->SDPtr0, pTxD->SDLen0, PCI_DMA_TODEVICE);
-					RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);
-				}
-				//Always assign pNdisPacket as NULL after clear
-				pTxRing->Cell[i].pNdisPacket = NULL;
-
-				pPacket = pTxRing->Cell[i].pNextNdisPacket;
-				if (pPacket)
-				{
-					PCI_UNMAP_SINGLE(pAd, pTxD->SDPtr1, pTxD->SDLen1, PCI_DMA_TODEVICE);
-					RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);
-				}
-				//Always assign pNextNdisPacket as NULL after clear
-				pTxRing->Cell[i].pNextNdisPacket = NULL;
-#ifdef RT_BIG_ENDIAN
-				RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-				WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
-#endif
-			}
-			// Start Tx, RX DMA
-			RtmpDmaEnable(pAd, 1);
-		}
-		// reset Rx statistics.
-		pAd->ate.LastSNR0 = 0;
-		pAd->ate.LastSNR1 = 0;
-		pAd->ate.LastRssi0 = 0;
-		pAd->ate.LastRssi1 = 0;
-		pAd->ate.LastRssi2 = 0;
-		pAd->ate.AvgRssi0 = 0;
-		pAd->ate.AvgRssi1 = 0;
-		pAd->ate.AvgRssi2 = 0;
-		pAd->ate.AvgRssi0X8 = 0;
-		pAd->ate.AvgRssi1X8 = 0;
-		pAd->ate.AvgRssi2X8 = 0;
-		pAd->ate.NumOfAvgRssiSample = 0;
-
-#ifdef RALINK_28xx_QA
-		// Tx frame
-		pAd->ate.bQATxStart = FALSE;
-		pAd->ate.bQARxStart = FALSE;
-		pAd->ate.seq = 0;
-
-		// counters
-		pAd->ate.U2M = 0;
-		pAd->ate.OtherData = 0;
-		pAd->ate.Beacon = 0;
-		pAd->ate.OtherCount = 0;
-		pAd->ate.TxAc0 = 0;
-		pAd->ate.TxAc1 = 0;
-		pAd->ate.TxAc2 = 0;
-		pAd->ate.TxAc3 = 0;
-		pAd->ate.TxHCCA = 0;
-		pAd->ate.TxMgmt = 0;
-		pAd->ate.RSSI0 = 0;
-		pAd->ate.RSSI1 = 0;
-		pAd->ate.RSSI2 = 0;
-		pAd->ate.SNR0 = 0;
-		pAd->ate.SNR1 = 0;
-
-		// control
-		pAd->ate.TxDoneCount = 0;
-		pAd->ate.TxStatus = 0; // task Tx status // 0 --> task is idle, 1 --> task is running
-#endif // RALINK_28xx_QA //
-
-		// Soft reset BBP.
-		BbpSoftReset(pAd);
-
-
-#ifdef CONFIG_STA_SUPPORT
-		//
-		// LinkDown() has "AsicDisableSync();" and "RTMP_BBP_IO_R/W8_BY_REG_ID();" inside.
-		//
-//      LinkDown(pAd, FALSE);
-//		AsicEnableBssSync(pAd);
-#ifndef UCOS
-		netif_stop_queue(pAd->net_dev);
-#endif // !UCOS //
-		//
-		// If we skip "LinkDown()", we should disable protection
-		// to prevent from sending out RTS or CTS-to-self.
-		//
-		ATEDisableAsicProtect(pAd);
-		RTMPStationStop(pAd);
-#endif // CONFIG_STA_SUPPORT //
-
-		/* Disable Tx */
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 2);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		/* Disable Rx */
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-	}
-	else if (!strcmp(arg, "ATESTOP"))
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: ATESTOP\n"));
-
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData); // recover the MAC_SYS_CTRL register back.
-
-		// Disable Tx, Rx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= (0xfffffff3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// Abort Tx, RX DMA.
-		RtmpDmaEnable(pAd, 0);
-
-#ifndef UCOS
-		pAd->ate.bFWLoading = TRUE;
-		Status = NICLoadFirmware(pAd);
-		if (Status != NDIS_STATUS_SUCCESS)
-		{
-			ATEDBGPRINT(RT_DEBUG_ERROR, ("NICLoadFirmware failed, Status[=0x%08x]\n", Status));
-			return FALSE;
-		}
-#endif // !UCOS //
-		pAd->ate.Mode = ATE_STOP;
-
-
-#ifdef CONFIG_STA_SUPPORT
-		//
-		// Even the firmware has been loaded,
-		// we still could use ATE_BBP_IO_READ8_BY_REG_ID().
-		// But this is not suggested.
-		//
-		BbpSoftReset(pAd);
-#endif // CONFIG_STA_SUPPORT //
-
-		NICDisableInterrupt(pAd);
-
-		NICInitializeAdapter(pAd, TRUE);
-
-
-		// Reinitialize Rx Ring before Rx DMA is enabled.
-		// The nightmare of >>>RxCoherent<<< was gone !
-		for (index = 0; index < RX_RING_SIZE; index++)
-		{
-			pRxD = (PRXD_STRUC) pAd->RxRing.Cell[index].AllocVa;
-			pRxD->DDONE = 0;
-		}
-
-		// We should read EEPROM for all cases.
-		NICReadEEPROMParameters(pAd, NULL);
-		NICInitAsicFromEEPROM(pAd);
-
-		AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
-		AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-
-		//
-		// Enable Interrupt
-		//
-
-		//
-		// These steps are only for APAutoSelectChannel().
-		//
-#if 0
-		//pAd->bStaFifoTest = TRUE;
-		pAd->int_enable_reg = ((DELAYINTMASK)  | (RxINT|TxDataInt|TxMgmtInt)) & ~(0x03);
-		pAd->int_disable_mask = 0;
-		pAd->int_pending = 0;
-#endif
-		RTMP_IO_WRITE32(pAd, INT_SOURCE_CSR, 0xffffffff);  // clear garbage interrupts
-		NICEnableInterrupt(pAd);
-
-
-/*=========================================================================*/
-		/* restore RX_FILTR_CFG */
-#ifdef CONFIG_STA_SUPPORT
-		/* restore RX_FILTR_CFG due to that QA maybe set it to 0x3 */
-		RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, STANORMAL);
-#endif // CONFIG_STA_SUPPORT //
-/*=========================================================================*/
-
-		// Enable Tx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value |= (1 << 2);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// Enable Tx, Rx DMA.
-		RtmpDmaEnable(pAd, 1);
-
-		// Enable Rx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value |= (1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-
-#ifdef CONFIG_STA_SUPPORT
-		RTMPStationStart(pAd);
-#endif // CONFIG_STA_SUPPORT //
-#ifndef UCOS
-		netif_start_queue(pAd->net_dev);
-#endif // !UCOS //
-	}
-	else if (!strcmp(arg, "TXCARR"))	// Tx Carrier
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: TXCARR\n"));
-		pAd->ate.Mode |= ATE_TXCARR;
-
-		// QA has done the following steps if it is used.
-		if (pAd->ate.bQATxStart == FALSE)
-		{
-			// Soft reset BBP.
-			BbpSoftReset(pAd);
-
-			// Carrier Test set BBP R22 bit7=1, bit6=1, bit[5~0]=0x01
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-			BbpData &= 0xFFFFFF00; //clear bit7, bit6, bit[5~0]
-			BbpData |= 0x000000C1; //set bit7=1, bit6=1, bit[5~0]=0x01
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-
-			// set MAC_SYS_CTRL(0x1004) Continuous Tx Production Test (bit4) = 1
-			RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-			Value = Value | 0x00000010;
-			RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-		}
-	}
-	else if (!strcmp(arg, "TXCONT"))	// Tx Continue
-	{
-		if (pAd->ate.bQATxStart == TRUE)
-		{
-			/* set MAC_SYS_CTRL(0x1004) bit4(Continuous Tx Production Test)
-			   and bit2(MAC TX enable) back to zero. */
-			RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
-			MacData &= 0xFFFFFFEB;
-			RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
-
-			// set BBP R22 bit7=0
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-			BbpData &= 0xFFFFFF7F; //set bit7=0
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-		}
-
-		/* for TxCont mode.
-		** Step 1: Send 50 packets first then wait for a moment.
-		** Step 2: Send more 50 packet then start continue mode.
-		*/
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: TXCONT\n"));
-		// Step 1: send 50 packets first.
-		pAd->ate.Mode |= ATE_TXCONT;
-		pAd->ate.TxCount = 50;
-                /* Do it after Tx/Rx DMA is aborted. */
-//		pAd->ate.TxDoneCount = 0;
-
-		// Soft reset BBP.
-		BbpSoftReset(pAd);
-
-		// Abort Tx, RX DMA.
-		RtmpDmaEnable(pAd, 0);
-
-		// Fix can't smooth kick
-		{
-			RTMP_IO_READ32(pAd, TX_DTX_IDX0 + QID_AC_BE * 0x10,  &pTxRing->TxDmaIdx);
-			pTxRing->TxSwFreeIdx = pTxRing->TxDmaIdx;
-			pTxRing->TxCpuIdx = pTxRing->TxDmaIdx;
-			RTMP_IO_WRITE32(pAd, TX_CTX_IDX0 + QID_AC_BE * 0x10, pTxRing->TxCpuIdx);
-		}
-
-		pAd->ate.TxDoneCount = 0;
-
-		/* Only needed if we have to send some normal frames. */
-		SetJapanFilter(pAd);
-
-		for (i = 0; (i < TX_RING_SIZE-1) && (i < pAd->ate.TxCount); i++)
-		{
-			PNDIS_PACKET pPacket;
-			UINT32 TxIdx = pTxRing->TxCpuIdx;
-
-#ifndef RT_BIG_ENDIAN
-			pTxD = (PTXD_STRUC)pTxRing->Cell[TxIdx].AllocVa;
-#else
-			pDestTxD = (PTXD_STRUC)pTxRing->Cell[TxIdx].AllocVa;
-			TxD = *pDestTxD;
-			pTxD = &TxD;
-			RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-#endif
-			// Clean current cell.
-			pPacket = pTxRing->Cell[TxIdx].pNdisPacket;
-			if (pPacket)
-			{
-				PCI_UNMAP_SINGLE(pAd, pTxD->SDPtr0, pTxD->SDLen0, PCI_DMA_TODEVICE);
-				RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);
-			}
-			//Always assign pNdisPacket as NULL after clear
-			pTxRing->Cell[TxIdx].pNdisPacket = NULL;
-
-			pPacket = pTxRing->Cell[TxIdx].pNextNdisPacket;
-			if (pPacket)
-			{
-				PCI_UNMAP_SINGLE(pAd, pTxD->SDPtr1, pTxD->SDLen1, PCI_DMA_TODEVICE);
-				RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);
-			}
-			//Always assign pNextNdisPacket as NULL after clear
-			pTxRing->Cell[TxIdx].pNextNdisPacket = NULL;
-
-#ifdef RT_BIG_ENDIAN
-			RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-			WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
-#endif
-
-			if (ATESetUpFrame(pAd, TxIdx) != 0)
-				break;
-
-			INC_RING_INDEX(pTxRing->TxCpuIdx, TX_RING_SIZE);
-		}
-
-                // Setup frame format.
-		ATESetUpFrame(pAd, pTxRing->TxCpuIdx);
-
-		// Start Tx, RX DMA.
-		RtmpDmaEnable(pAd, 1);
-
-		// Enable Tx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value |= (1 << 2);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// Disable Rx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-#ifdef RALINK_28xx_QA
-		if (pAd->ate.bQATxStart == TRUE)
-		{
-			pAd->ate.TxStatus = 1;
-			//pAd->ate.Repeat = 0;
-		}
-#endif // RALINK_28xx_QA //
-
-		// kick Tx-Ring.
-		RTMP_IO_WRITE32(pAd, TX_CTX_IDX0 + QID_AC_BE * RINGREG_DIFF, pAd->TxRing[QID_AC_BE].TxCpuIdx);
-
-		RTMPusecDelay(5000);
-
-
-		// Step 2: send more 50 packets then start continue mode.
-		// Abort Tx, RX DMA.
-		RtmpDmaEnable(pAd, 0);
-
-		// Cont. TX set BBP R22 bit7=1
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-		BbpData |= 0x00000080; //set bit7=1
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-
-		pAd->ate.TxCount = 50;
-
-		// Fix can't smooth kick
-		{
-			RTMP_IO_READ32(pAd, TX_DTX_IDX0 + QID_AC_BE * 0x10,  &pTxRing->TxDmaIdx);
-			pTxRing->TxSwFreeIdx = pTxRing->TxDmaIdx;
-			pTxRing->TxCpuIdx = pTxRing->TxDmaIdx;
-			RTMP_IO_WRITE32(pAd, TX_CTX_IDX0 + QID_AC_BE * 0x10, pTxRing->TxCpuIdx);
-		}
-
-		pAd->ate.TxDoneCount = 0;
-
-		SetJapanFilter(pAd);
-
-		for (i = 0; (i < TX_RING_SIZE-1) && (i < pAd->ate.TxCount); i++)
-		{
-			PNDIS_PACKET pPacket;
-			UINT32 TxIdx = pTxRing->TxCpuIdx;
-
-#ifndef RT_BIG_ENDIAN
-			pTxD = (PTXD_STRUC)pTxRing->Cell[TxIdx].AllocVa;
-#else
-			pDestTxD = (PTXD_STRUC)pTxRing->Cell[TxIdx].AllocVa;
-			TxD = *pDestTxD;
-			pTxD = &TxD;
-			RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-#endif
-			// clean current cell.
-			pPacket = pTxRing->Cell[TxIdx].pNdisPacket;
-			if (pPacket)
-			{
-				PCI_UNMAP_SINGLE(pAd, pTxD->SDPtr0, pTxD->SDLen0, PCI_DMA_TODEVICE);
-				RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);
-			}
-			//Always assign pNdisPacket as NULL after clear
-			pTxRing->Cell[TxIdx].pNdisPacket = NULL;
-
-			pPacket = pTxRing->Cell[TxIdx].pNextNdisPacket;
-			if (pPacket)
-			{
-				PCI_UNMAP_SINGLE(pAd, pTxD->SDPtr1, pTxD->SDLen1, PCI_DMA_TODEVICE);
-				RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);
-			}
-			//Always assign pNextNdisPacket as NULL after clear
-			pTxRing->Cell[TxIdx].pNextNdisPacket = NULL;
-
-#ifdef RT_BIG_ENDIAN
-			RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-			WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
-#endif
-
-			if (ATESetUpFrame(pAd, TxIdx) != 0)
-				break;
-
-			INC_RING_INDEX(pTxRing->TxCpuIdx, TX_RING_SIZE);
-		}
-
-		ATESetUpFrame(pAd, pTxRing->TxCpuIdx);
-
-		// Start Tx, RX DMA.
-		RtmpDmaEnable(pAd, 1);
-
-		// Enable Tx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value |= (1 << 2);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// Disable Rx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-#ifdef RALINK_28xx_QA
-		if (pAd->ate.bQATxStart == TRUE)
-		{
-			pAd->ate.TxStatus = 1;
-			//pAd->ate.Repeat = 0;
-		}
-#endif // RALINK_28xx_QA //
-
-		// kick Tx-Ring.
-		RTMP_IO_WRITE32(pAd, TX_CTX_IDX0 + QID_AC_BE * RINGREG_DIFF, pAd->TxRing[QID_AC_BE].TxCpuIdx);
-
-		RTMPusecDelay(500);
-
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
-		MacData |= 0x00000010;
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
-	}
-	else if (!strcmp(arg, "TXFRAME")) // Tx Frames
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: TXFRAME(Count=%d)\n", pAd->ate.TxCount));
-		pAd->ate.Mode |= ATE_TXFRAME;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-
-		// Soft reset BBP.
-		BbpSoftReset(pAd);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
-
-		// Abort Tx, RX DMA.
-		RtmpDmaEnable(pAd, 0);
-
-		// Fix can't smooth kick
-		{
-			RTMP_IO_READ32(pAd, TX_DTX_IDX0 + QID_AC_BE * 0x10,  &pTxRing->TxDmaIdx);
-			pTxRing->TxSwFreeIdx = pTxRing->TxDmaIdx;
-			pTxRing->TxCpuIdx = pTxRing->TxDmaIdx;
-			RTMP_IO_WRITE32(pAd, TX_CTX_IDX0 + QID_AC_BE * 0x10, pTxRing->TxCpuIdx);
-		}
-
-		pAd->ate.TxDoneCount = 0;
-
-		SetJapanFilter(pAd);
-
-		for (i = 0; (i < TX_RING_SIZE-1) && (i < pAd->ate.TxCount); i++)
-		{
-			PNDIS_PACKET pPacket;
-			UINT32 TxIdx = pTxRing->TxCpuIdx;
-
-#ifndef RT_BIG_ENDIAN
-			pTxD = (PTXD_STRUC)pTxRing->Cell[TxIdx].AllocVa;
-#else
-			pDestTxD = (PTXD_STRUC)pTxRing->Cell[TxIdx].AllocVa;
-			TxD = *pDestTxD;
-			pTxD = &TxD;
-			RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-#endif
-			// Clean current cell.
-			pPacket = pTxRing->Cell[TxIdx].pNdisPacket;
-			if (pPacket)
-			{
-				PCI_UNMAP_SINGLE(pAd, pTxD->SDPtr0, pTxD->SDLen0, PCI_DMA_TODEVICE);
-				RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);
-			}
-			//Always assign pNdisPacket as NULL after clear
-			pTxRing->Cell[TxIdx].pNdisPacket = NULL;
-
-			pPacket = pTxRing->Cell[TxIdx].pNextNdisPacket;
-			if (pPacket)
-			{
-				PCI_UNMAP_SINGLE(pAd, pTxD->SDPtr1, pTxD->SDLen1, PCI_DMA_TODEVICE);
-				RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);
-			}
-			//Always assign pNextNdisPacket as NULL after clear
-			pTxRing->Cell[TxIdx].pNextNdisPacket = NULL;
-
-#ifdef RT_BIG_ENDIAN
-			RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-			WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
-#endif
-
-			if (ATESetUpFrame(pAd, TxIdx) != 0)
-				break;
-
-			INC_RING_INDEX(pTxRing->TxCpuIdx, TX_RING_SIZE);
-
-		}
-
-		ATESetUpFrame(pAd, pTxRing->TxCpuIdx);
-
-		// Start Tx, Rx DMA.
-		RtmpDmaEnable(pAd, 1);
-
-		// Enable Tx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value |= (1 << 2);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-#ifdef RALINK_28xx_QA
-		// add this for LoopBack mode
-		if (pAd->ate.bQARxStart == FALSE)
-		{
-			// Disable Rx
-			RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-			Value &= ~(1 << 3);
-			RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-		}
-
-		if (pAd->ate.bQATxStart == TRUE)
-		{
-			pAd->ate.TxStatus = 1;
-			//pAd->ate.Repeat = 0;
-		}
-#else
-		// Disable Rx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-#endif // RALINK_28xx_QA //
-
-		RTMP_IO_READ32(pAd, TX_DTX_IDX0 + QID_AC_BE * RINGREG_DIFF, &pAd->TxRing[QID_AC_BE].TxDmaIdx);
-		// kick Tx-Ring.
-		RTMP_IO_WRITE32(pAd, TX_CTX_IDX0 + QID_AC_BE * RINGREG_DIFF, pAd->TxRing[QID_AC_BE].TxCpuIdx);
-
-		pAd->RalinkCounters.KickTxCount++;
-	}
-#ifdef RALINK_28xx_QA
-	else if (!strcmp(arg, "TXSTOP"))
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: TXSTOP\n"));
-		atemode = pAd->ate.Mode;
-		pAd->ate.Mode &= ATE_TXSTOP;
-		pAd->ate.bQATxStart = FALSE;
-//		pAd->ate.TxDoneCount = pAd->ate.TxCount;
-
-		if (atemode & ATE_TXCARR)
-		{
-			// No Carrier Test set BBP R22 bit7=0, bit6=0, bit[5~0]=0x0
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-			BbpData &= 0xFFFFFF00; //clear bit7, bit6, bit[5~0]
-		    ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-		}
-		else if (atemode & ATE_TXCARRSUPP)
-		{
-			// No Cont. TX set BBP R22 bit7=0
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-			BbpData &= ~(1 << 7); //set bit7=0
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-
-			// No Carrier Suppression set BBP R24 bit0=0
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R24, &BbpData);
-			BbpData &= 0xFFFFFFFE; //clear bit0
-		    ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, BbpData);
-		}
-		// We should free some resource which allocate when ATE_TXFRAME , ATE_STOP, and ATE_TXCONT.
-		else if ((atemode & ATE_TXFRAME) || (atemode == ATE_STOP))
-		{
-
-			PRTMP_TX_RING pTxRing = &pAd->TxRing[QID_AC_BE];
-
-			if (atemode & ATE_TXCONT)
-			{
-				// No Cont. TX set BBP R22 bit7=0
-				ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-				BbpData &= ~(1 << 7); //set bit7=0
-				ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-			}
-
-			// Abort Tx, Rx DMA.
-			RtmpDmaEnable(pAd, 0);
-			for (i=0; i<TX_RING_SIZE; i++)
-			{
-				PNDIS_PACKET  pPacket;
-
-#ifndef RT_BIG_ENDIAN
-			    pTxD = (PTXD_STRUC)pAd->TxRing[QID_AC_BE].Cell[i].AllocVa;
-#else
-        		pDestTxD = (PTXD_STRUC)pAd->TxRing[QID_AC_BE].Cell[i].AllocVa;
-        		TxD = *pDestTxD;
-        		pTxD = &TxD;
-        		RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-#endif
-				pTxD->DMADONE = 0;
-				pPacket = pTxRing->Cell[i].pNdisPacket;
-				if (pPacket)
-				{
-					PCI_UNMAP_SINGLE(pAd, pTxD->SDPtr0, pTxD->SDLen0, PCI_DMA_TODEVICE);
-					RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);
-				}
-				//Always assign pNdisPacket as NULL after clear
-				pTxRing->Cell[i].pNdisPacket = NULL;
-
-				pPacket = pTxRing->Cell[i].pNextNdisPacket;
-				if (pPacket)
-				{
-					PCI_UNMAP_SINGLE(pAd, pTxD->SDPtr1, pTxD->SDLen1, PCI_DMA_TODEVICE);
-					RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);
-				}
-				//Always assign pNextNdisPacket as NULL after clear
-				pTxRing->Cell[i].pNextNdisPacket = NULL;
-#ifdef RT_BIG_ENDIAN
-				RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-				WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
-#endif
-			}
-			// Enable Tx, Rx DMA
-			RtmpDmaEnable(pAd, 1);
-
-		}
-
-		// control
-//		pAd->ate.TxDoneCount = 0;
-		pAd->ate.TxStatus = 0; // task Tx status // 0 --> task is idle, 1 --> task is running
-
-		// Soft reset BBP.
-		BbpSoftReset(pAd);
-
-		// Disable Tx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 2);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-	}
-	else if (!strcmp(arg, "RXSTOP"))
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: RXSTOP\n"));
-		atemode = pAd->ate.Mode;
-		pAd->ate.Mode &= ATE_RXSTOP;
-		pAd->ate.bQARxStart = FALSE;
-//		pAd->ate.TxDoneCount = pAd->ate.TxCount;
-
-		if (atemode & ATE_TXCARR)
-		{
-			;
-		}
-		else if (atemode & ATE_TXCARRSUPP)
-		{
-			;
-		}
-
-		// We should free some resource which was allocated when ATE_TXFRAME , ATE_STOP, and ATE_TXCONT.
-		else if ((atemode & ATE_TXFRAME) || (atemode == ATE_STOP))
-		{
-			if (atemode & ATE_TXCONT)
-			{
-				;
-			}
-		}
-
-		// control
-//		pAd->ate.TxDoneCount = 0;
-//		pAd->ate.TxStatus = 0; // task Tx status // 0 --> task is idle, 1 --> task is running
-
-		// Soft reset BBP.
-		BbpSoftReset(pAd);
-
-		// Disable Rx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-	}
-#endif // RALINK_28xx_QA //
-	else if (!strcmp(arg, "RXFRAME")) // Rx Frames
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: RXFRAME\n"));
-
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
-
-		pAd->ate.Mode |= ATE_RXFRAME;
-
-		// Disable Tx of MAC block.
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 2);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// Enable Rx of MAC block.
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value |= (1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-	}
-	else
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: Invalid arg!\n"));
-		return FALSE;
-	}
-	RTMPusecDelay(5000);
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("<=== ATECmdHandler()\n"));
-
-	return TRUE;
-}
-/*                                                           */
-/*                                                           */
-/*=======================End of RT2860=======================*/
-
-
-/*======================Start of RT2870======================*/
-/*                                                           */
-/*                                                           */
-
-
-INT	Set_ATE_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	if (ATECmdHandler(pAd, arg))
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_Proc Success\n"));
-
-
-		return TRUE;
-	}
-	else
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_Proc Failed\n"));
-		return FALSE;
-	}
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE ADDR1=DA for TxFrame(AP  : To DS = 0 ; From DS = 1)
-        or
-        Set ATE ADDR3=DA for TxFrame(STA : To DS = 1 ; From DS = 0)
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_DA_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR				*value;
-	INT					i;
-
-	if(strlen(arg) != 17)  //Mac address acceptable format 01:02:03:04:05:06 length 17
-		return FALSE;
-
-    for (i=0, value = rstrtok(arg, ":"); value; value = rstrtok(NULL, ":"))
-	{
-		if((strlen(value) != 2) || (!isxdigit(*value)) || (!isxdigit(*(value+1))) )
-			return FALSE;  //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
-		AtoH(value, &pAd->ate.Addr3[i++], 1);
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-	if(i != 6)
-		return FALSE;  //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_DA_Proc (DA = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAd->ate.Addr3[0],
-		pAd->ate.Addr3[1], pAd->ate.Addr3[2], pAd->ate.Addr3[3], pAd->ate.Addr3[4], pAd->ate.Addr3[5]));
-#endif // CONFIG_STA_SUPPORT //
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_DA_Proc Success\n"));
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE ADDR3=SA for TxFrame(AP  : To DS = 0 ; From DS = 1)
-        or
-        Set ATE ADDR2=SA for TxFrame(STA : To DS = 1 ; From DS = 0)
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_SA_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR				*value;
-	INT					i;
-
-	if(strlen(arg) != 17)  //Mac address acceptable format 01:02:03:04:05:06 length 17
-		return FALSE;
-
-    for (i=0, value = rstrtok(arg, ":"); value; value = rstrtok(NULL, ":"))
-	{
-		if((strlen(value) != 2) || (!isxdigit(*value)) || (!isxdigit(*(value+1))) )
-			return FALSE;  //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
-		AtoH(value, &pAd->ate.Addr2[i++], 1);
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-	if(i != 6)
-		return FALSE;  //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_SA_Proc (SA = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAd->ate.Addr2[0],
-		pAd->ate.Addr2[1], pAd->ate.Addr2[2], pAd->ate.Addr2[3], pAd->ate.Addr2[4], pAd->ate.Addr2[5]));
-#endif // CONFIG_STA_SUPPORT //
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_SA_Proc Success\n"));
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE ADDR2=BSSID for TxFrame(AP  : To DS = 0 ; From DS = 1)
-        or
-        Set ATE ADDR1=BSSID for TxFrame(STA : To DS = 1 ; From DS = 0)
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_BSSID_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR				*value;
-	INT					i;
-
-	if(strlen(arg) != 17)  //Mac address acceptable format 01:02:03:04:05:06 length 17
-		return FALSE;
-
-    for (i=0, value = rstrtok(arg, ":"); value; value = rstrtok(NULL, ":"))
-	{
-		if((strlen(value) != 2) || (!isxdigit(*value)) || (!isxdigit(*(value+1))) )
-			return FALSE;  //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
-		AtoH(value, &pAd->ate.Addr1[i++], 1);
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-	if(i != 6)
-		return FALSE;  //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_BSSID_Proc (BSSID = %2X:%2X:%2X:%2X:%2X:%2X)\n",	pAd->ate.Addr1[0],
-		pAd->ate.Addr1[1], pAd->ate.Addr1[2], pAd->ate.Addr1[3], pAd->ate.Addr1[4], pAd->ate.Addr1[5]));
-#endif // CONFIG_STA_SUPPORT //
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_BSSID_Proc Success\n"));
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx Channel
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_CHANNEL_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UCHAR channel;
-
-	channel = simple_strtol(arg, 0, 10);
-
-	if ((channel < 1) || (channel > 216))// to allow A band channel : ((channel < 1) || (channel > 14))
-	{
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_CHANNEL_Proc::Out of range, it should be in range of 1~14.\n"));
-		return FALSE;
-	}
-	pAd->ate.Channel = channel;
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_CHANNEL_Proc (ATE Channel = %d)\n", pAd->ate.Channel));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_CHANNEL_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx Power0
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_POWER0_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR TxPower;
-
-	TxPower = simple_strtol(arg, 0, 10);
-
-	if (pAd->ate.Channel <= 14)
-	{
-		if ((TxPower > 31) || (TxPower < 0))
-		{
-			ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_POWER0_Proc::Out of range (Value=%d)\n", TxPower));
-			return FALSE;
-		}
-	}
-	else// 5.5GHz
-	{
-		if ((TxPower > 15) || (TxPower < -7))
-		{
-			ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_POWER0_Proc::Out of range (Value=%d)\n", TxPower));
-			return FALSE;
-		}
-	}
-
-	pAd->ate.TxPower0 = TxPower;
-	ATETxPwrHandler(pAd, 0);
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_POWER0_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx Power1
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_POWER1_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR TxPower;
-
-	TxPower = simple_strtol(arg, 0, 10);
-
-	if (pAd->ate.Channel <= 14)
-	{
-	if ((TxPower > 31) || (TxPower < 0))
-	{
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_POWER1_Proc::Out of range (Value=%d)\n", TxPower));
-		return FALSE;
-	}
-	}
-	else
-	{
-		if ((TxPower > 15) || (TxPower < -7))
-		{
-			ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_POWER1_Proc::Out of range (Value=%d)\n", TxPower));
-			return FALSE;
-		}
-	}
-
-	pAd->ate.TxPower1 = TxPower;
-	ATETxPwrHandler(pAd, 1);
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_POWER1_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx Antenna
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_Antenna_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR value;
-
-	value = simple_strtol(arg, 0, 10);
-
-	if ((value > 2) || (value < 0))
-	{
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_Antenna_Proc::Out of range (Value=%d)\n", value));
-		return FALSE;
-	}
-
-	pAd->ate.TxAntennaSel = value;
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_Antenna_Proc (Antenna = %d)\n", pAd->ate.TxAntennaSel));
-	ATEDBGPRINT(RT_DEBUG_TRACE,("Ralink: Set_ATE_TX_Antenna_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Rx Antenna
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_RX_Antenna_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR value;
-
-	value = simple_strtol(arg, 0, 10);
-
-	if ((value > 3) || (value < 0))
-	{
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_RX_Antenna_Proc::Out of range (Value=%d)\n", value));
-		return FALSE;
-	}
-
-	pAd->ate.RxAntennaSel = value;
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_RX_Antenna_Proc (Antenna = %d)\n", pAd->ate.RxAntennaSel));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_RX_Antenna_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE RF frequence offset
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_FREQOFFSET_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UCHAR RFFreqOffset;
-	ULONG R4;
-
-	RFFreqOffset = simple_strtol(arg, 0, 10);
-
-	if(RFFreqOffset >= 64)
-	{
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_FREQOFFSET_Proc::Out of range, it should be in range of 0~63.\n"));
-		return FALSE;
-	}
-
-	pAd->ate.RFFreqOffset = RFFreqOffset;
-	R4 = pAd->ate.RFFreqOffset << 15;		// shift TX power control to correct RF register bit position
-	R4 |= (pAd->LatchRfRegs.R4 & ((~0x001f8000)));
-	pAd->LatchRfRegs.R4 = R4;
-
-	RtmpRfIoWrite(pAd);
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_FREQOFFSET_Proc (RFFreqOffset = %d)\n", pAd->ate.RFFreqOffset));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_FREQOFFSET_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE RF BW
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_BW_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	int i;
-	UCHAR value = 0;
-	UCHAR BBPCurrentBW;
-
-	BBPCurrentBW = simple_strtol(arg, 0, 10);
-
-	if(BBPCurrentBW == 0)
-		pAd->ate.TxWI.BW = BW_20;
-	else
-		pAd->ate.TxWI.BW = BW_40;
-
-	if(pAd->ate.TxWI.BW == BW_20)
-	{
-		if(pAd->ate.Channel <= 14)
-		{
- 		for (i=0; i<5; i++)
- 		{
-				if (pAd->Tx20MPwrCfgGBand[i] != 0xffffffff)
-				{
-					RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, pAd->Tx20MPwrCfgGBand[i]);
-					RTMPusecDelay(5000);
-				}
-			}
-		}
-		else
-		{
-			for (i=0; i<5; i++)
-			{
-				if (pAd->Tx20MPwrCfgABand[i] != 0xffffffff)
- 			{
-					RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, pAd->Tx20MPwrCfgABand[i]);
- 				RTMPusecDelay(5000);
- 			}
- 		}
-		}
-
-		//Set BBP R4 bit[4:3]=0:0
- 		ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &value);
- 		value &= (~0x18);
- 		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, value);
-
-  		//Set BBP R66=0x3C
- 		value = 0x3C;
- 		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, value);
-		//Set BBP R68=0x0B
-		//to improve Rx sensitivity.
-		value = 0x0B;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R68, value);
-		//Set BBP R69=0x16
-		value = 0x16;
- 		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, value);
-		//Set BBP R70=0x08
-		value = 0x08;
- 		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, value);
-		//Set BBP R73=0x11
-		value = 0x11;
- 		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, value);
-
-	    // If Channel=14, Bandwidth=20M and Mode=CCK, Set BBP R4 bit5=1
-	    // (Japan filter coefficients)
-	    // This segment of code will only works when ATETXMODE and ATECHANNEL
-	    // were set to MODE_CCK and 14 respectively before ATETXBW is set to 0.
-	    //=====================================================================
-		if (pAd->ate.Channel == 14)
-		{
-			int TxMode = pAd->ate.TxWI.PHYMODE;
-			if (TxMode == MODE_CCK)
-			{
-				// when Channel==14 && Mode==CCK && BandWidth==20M, BBP R4 bit5=1
- 				ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &value);
-				value |= 0x20; //set bit5=1
- 				ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, value);
-			}
-		}
-
-	    //=====================================================================
-		// If bandwidth != 40M, RF Reg4 bit 21 = 0.
-		pAd->LatchRfRegs.R4 &= ~0x00200000;
-		RtmpRfIoWrite(pAd);
-	}
-	else if(pAd->ate.TxWI.BW == BW_40)
-	{
-		if(pAd->ate.Channel <= 14)
-		{
-			for (i=0; i<5; i++)
-			{
-				if (pAd->Tx40MPwrCfgGBand[i] != 0xffffffff)
-				{
-					RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, pAd->Tx40MPwrCfgGBand[i]);
-					RTMPusecDelay(5000);
-				}
-			}
-		}
-		else
-		{
-			for (i=0; i<5; i++)
-			{
-				if (pAd->Tx40MPwrCfgABand[i] != 0xffffffff)
-				{
-					RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, pAd->Tx40MPwrCfgABand[i]);
-					RTMPusecDelay(5000);
-				}
-			}
-#ifdef DOT11_N_SUPPORT
-			if ((pAd->ate.TxWI.PHYMODE >= MODE_HTMIX) && (pAd->ate.TxWI.MCS == 7))
-			{
-    			value = 0x28;
-    			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R67, value);
-			}
-#endif // DOT11_N_SUPPORT //
-		}
-
-		//Set BBP R4 bit[4:3]=1:0
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &value);
-		value &= (~0x18);
-		value |= 0x10;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, value);
-
-		//Set BBP R66=0x3C
-		value = 0x3C;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, value);
-		//Set BBP R68=0x0C
-		//to improve Rx sensitivity.
-		value = 0x0C;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R68, value);
-		//Set BBP R69=0x1A
-		value = 0x1A;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, value);
-		//Set BBP R70=0x0A
-		value = 0x0A;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, value);
-		//Set BBP R73=0x16
-		value = 0x16;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, value);
-
-		// If bandwidth = 40M, set RF Reg4 bit 21 = 1.
-		pAd->LatchRfRegs.R4 |= 0x00200000;
-		RtmpRfIoWrite(pAd);
-	}
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_BW_Proc (BBPCurrentBW = %d)\n", pAd->ate.TxWI.BW));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_BW_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx frame length
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_LENGTH_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	pAd->ate.TxLength = simple_strtol(arg, 0, 10);
-
-	if((pAd->ate.TxLength < 24) || (pAd->ate.TxLength > (MAX_FRAME_SIZE - 34/* == 2312 */)))
-	{
-		pAd->ate.TxLength = (MAX_FRAME_SIZE - 34/* == 2312 */);
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_LENGTH_Proc::Out of range, it should be in range of 24~%d.\n", (MAX_FRAME_SIZE - 34/* == 2312 */)));
-		return FALSE;
-	}
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_LENGTH_Proc (TxLength = %d)\n", pAd->ate.TxLength));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_LENGTH_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx frame count
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_COUNT_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	pAd->ate.TxCount = simple_strtol(arg, 0, 10);
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_COUNT_Proc (TxCount = %d)\n", pAd->ate.TxCount));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_COUNT_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx frame MCS
-
-        Return:
-        	TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_MCS_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UCHAR MCS;
-	int result;
-
-	MCS = simple_strtol(arg, 0, 10);
-	result = CheckMCSValid(pAd->ate.TxWI.PHYMODE, MCS);
-
-	if (result != -1)
-	{
-		pAd->ate.TxWI.MCS = (UCHAR)MCS;
-	}
-	else
-	{
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_MCS_Proc::Out of range, refer to rate table.\n"));
-		return FALSE;
-	}
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_MCS_Proc (MCS = %d)\n", pAd->ate.TxWI.MCS));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_MCS_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx frame Mode
-        0: MODE_CCK
-        1: MODE_OFDM
-        2: MODE_HTMIX
-        3: MODE_HTGREENFIELD
-
-        Return:
-        	TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_MODE_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	pAd->ate.TxWI.PHYMODE = simple_strtol(arg, 0, 10);
-
-	if(pAd->ate.TxWI.PHYMODE > 3)
-	{
-		pAd->ate.TxWI.PHYMODE = 0;
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_MODE_Proc::Out of range. it should be in range of 0~3\n"));
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("0: CCK, 1: OFDM, 2: HT_MIX, 3: HT_GREEN_FIELD.\n"));
-		return FALSE;
-	}
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_MODE_Proc (TxMode = %d)\n", pAd->ate.TxWI.PHYMODE));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_MODE_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx frame GI
-
-        Return:
-        	TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_GI_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	pAd->ate.TxWI.ShortGI = simple_strtol(arg, 0, 10);
-
-	if(pAd->ate.TxWI.ShortGI > 1)
-	{
-		pAd->ate.TxWI.ShortGI = 0;
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_GI_Proc::Out of range\n"));
-		return FALSE;
-	}
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_GI_Proc (GI = %d)\n", pAd->ate.TxWI.ShortGI));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_GI_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-    ==========================================================================
- */
-INT	Set_ATE_RX_FER_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	pAd->ate.bRxFer = simple_strtol(arg, 0, 10);
-
-	if (pAd->ate.bRxFer == 1)
-	{
-		pAd->ate.RxCntPerSec = 0;
-		pAd->ate.RxTotalCnt = 0;
-	}
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_RX_FER_Proc (bRxFer = %d)\n", pAd->ate.bRxFer));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_RX_FER_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-INT Set_ATE_Read_RF_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ate_print(KERN_EMERG "R1 = %lx\n", pAd->LatchRfRegs.R1);
-	ate_print(KERN_EMERG "R2 = %lx\n", pAd->LatchRfRegs.R2);
-	ate_print(KERN_EMERG "R3 = %lx\n", pAd->LatchRfRegs.R3);
-	ate_print(KERN_EMERG "R4 = %lx\n", pAd->LatchRfRegs.R4);
-
-	return TRUE;
-}
-
-INT Set_ATE_Write_RF1_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UINT32 value = simple_strtol(arg, 0, 16);
-
-	pAd->LatchRfRegs.R1 = value;
-	RtmpRfIoWrite(pAd);
-
-	return TRUE;
-}
-
-INT Set_ATE_Write_RF2_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UINT32 value = simple_strtol(arg, 0, 16);
-
-	pAd->LatchRfRegs.R2 = value;
-	RtmpRfIoWrite(pAd);
-
-	return TRUE;
-}
-
-INT Set_ATE_Write_RF3_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UINT32 value = simple_strtol(arg, 0, 16);
-
-	pAd->LatchRfRegs.R3 = value;
-	RtmpRfIoWrite(pAd);
-
-	return TRUE;
-}
-
-INT Set_ATE_Write_RF4_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UINT32 value = simple_strtol(arg, 0, 16);
-
-	pAd->LatchRfRegs.R4 = value;
-	RtmpRfIoWrite(pAd);
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Load and Write EEPROM from a binary file prepared in advance.
-
-        Return:
-        	TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-#ifndef UCOS
-INT Set_ATE_Load_E2P_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	BOOLEAN		    ret = FALSE;
-	PUCHAR			src = EEPROM_BIN_FILE_NAME;
-	struct file		*srcf;
-	INT32 			retval, orgfsuid, orgfsgid;
-   	mm_segment_t	orgfs;
-	USHORT 			WriteEEPROM[(EEPROM_SIZE/2)];
-	UINT32			FileLength = 0;
-	UINT32 			value = simple_strtol(arg, 0, 10);
-
-	ATEDBGPRINT(RT_DEBUG_ERROR, ("===> %s (value=%d)\n\n", __func__, value));
-
-	if (value > 0)
-	{
-		/* zero the e2p buffer */
-		NdisZeroMemory((PUCHAR)WriteEEPROM, EEPROM_SIZE);
-
-		/* save uid and gid used for filesystem access.
-	    ** set user and group to 0 (root)
-	    */
-		orgfsuid = current->fsuid;
-		orgfsgid = current->fsgid;
-		/* as root */
-		current->fsuid = current->fsgid = 0;
-    	orgfs = get_fs();
-    	set_fs(KERNEL_DS);
-
-		do
-		{
-			/* open the bin file */
-			srcf = filp_open(src, O_RDONLY, 0);
-
-			if (IS_ERR(srcf))
-			{
-				ate_print("%s - Error %ld opening %s\n", __func__, -PTR_ERR(srcf), src);
-				break;
-			}
-
-			/* the object must have a read method */
-			if ((srcf->f_op == NULL) || (srcf->f_op->read == NULL))
-			{
-				ate_print("%s - %s does not have a read method\n", __func__, src);
-				break;
-			}
-
-			/* read the firmware from the file *.bin */
-			FileLength = srcf->f_op->read(srcf,
-										  (PUCHAR)WriteEEPROM,
-										  EEPROM_SIZE,
-										  &srcf->f_pos);
-
-			if (FileLength != EEPROM_SIZE)
-			{
-				ate_print("%s: error file length (=%d) in e2p.bin\n",
-					   __func__, FileLength);
-				break;
-			}
-			else
-			{
-				/* write the content of .bin file to EEPROM */
-				rt_ee_write_all(pAd, WriteEEPROM);
-				ret = TRUE;
-			}
-			break;
-		} while(TRUE);
-
-		/* close firmware file */
-		if (IS_ERR(srcf))
-		{
-				;
-		}
-		else
-		{
-			retval = filp_close(srcf, NULL);
-			if (retval)
-			{
-				ATEDBGPRINT(RT_DEBUG_ERROR, ("--> Error %d closing %s\n", -retval, src));
-
-			}
-		}
-
-		/* restore */
-		set_fs(orgfs);
-		current->fsuid = orgfsuid;
-		current->fsgid = orgfsgid;
-	}
-    ATEDBGPRINT(RT_DEBUG_ERROR, ("<=== %s (ret=%d)\n", __func__, ret));
-
-    return ret;
-
-}
-#else
-INT Set_ATE_Load_E2P_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	USHORT 			WriteEEPROM[(EEPROM_SIZE/2)];
-	struct iwreq	*wrq = (struct iwreq *)arg;
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("===> %s (wrq->u.data.length = %d)\n\n", __func__, wrq->u.data.length));
-
-	if (wrq->u.data.length != EEPROM_SIZE)
-	{
-		ate_print("%s: error length (=%d) from host\n",
-			   __func__, wrq->u.data.length);
-		return FALSE;
-	}
-	else/* (wrq->u.data.length == EEPROM_SIZE) */
-	{
-		/* zero the e2p buffer */
-		NdisZeroMemory((PUCHAR)WriteEEPROM, EEPROM_SIZE);
-
-		/* fill the local buffer */
-		NdisMoveMemory((PUCHAR)WriteEEPROM, wrq->u.data.pointer, wrq->u.data.length);
-
-		do
-		{
-				/* write the content of .bin file to EEPROM */
-				rt_ee_write_all(pAd, WriteEEPROM);
-
-		} while(FALSE);
-		}
-
-    ATEDBGPRINT(RT_DEBUG_TRACE, ("<=== %s\n", __func__));
-
-    return TRUE;
-
-}
-#endif // !UCOS //
-
-INT Set_ATE_Read_E2P_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	USHORT buffer[EEPROM_SIZE/2];
-	USHORT *p;
-	int i;
-
-	rt_ee_read_all(pAd, (USHORT *)buffer);
-	p = buffer;
-	for (i = 0; i < (EEPROM_SIZE/2); i++)
-	{
-		ate_print("%4.4x ", *p);
-		if (((i+1) % 16) == 0)
-			ate_print("\n");
-		p++;
-	}
-	return TRUE;
-}
-
-INT	Set_ATE_Show_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ate_print("Mode=%d\n", pAd->ate.Mode);
-	ate_print("TxPower0=%d\n", pAd->ate.TxPower0);
-	ate_print("TxPower1=%d\n", pAd->ate.TxPower1);
-	ate_print("TxAntennaSel=%d\n", pAd->ate.TxAntennaSel);
-	ate_print("RxAntennaSel=%d\n", pAd->ate.RxAntennaSel);
-	ate_print("BBPCurrentBW=%d\n", pAd->ate.TxWI.BW);
-	ate_print("GI=%d\n", pAd->ate.TxWI.ShortGI);
-	ate_print("MCS=%d\n", pAd->ate.TxWI.MCS);
-	ate_print("TxMode=%d\n", pAd->ate.TxWI.PHYMODE);
-	ate_print("Addr1=%02x:%02x:%02x:%02x:%02x:%02x\n",
-		pAd->ate.Addr1[0], pAd->ate.Addr1[1], pAd->ate.Addr1[2], pAd->ate.Addr1[3], pAd->ate.Addr1[4], pAd->ate.Addr1[5]);
-	ate_print("Addr2=%02x:%02x:%02x:%02x:%02x:%02x\n",
-		pAd->ate.Addr2[0], pAd->ate.Addr2[1], pAd->ate.Addr2[2], pAd->ate.Addr2[3], pAd->ate.Addr2[4], pAd->ate.Addr2[5]);
-	ate_print("Addr3=%02x:%02x:%02x:%02x:%02x:%02x\n",
-		pAd->ate.Addr3[0], pAd->ate.Addr3[1], pAd->ate.Addr3[2], pAd->ate.Addr3[3], pAd->ate.Addr3[4], pAd->ate.Addr3[5]);
-	ate_print("Channel=%d\n", pAd->ate.Channel);
-	ate_print("TxLength=%d\n", pAd->ate.TxLength);
-	ate_print("TxCount=%u\n", pAd->ate.TxCount);
-	ate_print("RFFreqOffset=%d\n", pAd->ate.RFFreqOffset);
-	ate_print(KERN_EMERG "Set_ATE_Show_Proc Success\n");
-	return TRUE;
-}
-
-INT	Set_ATE_Help_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ate_print("ATE=ATESTART, ATESTOP, TXCONT, TXCARR, TXFRAME, RXFRAME\n");
-	ate_print("ATEDA\n");
-	ate_print("ATESA\n");
-	ate_print("ATEBSSID\n");
-	ate_print("ATECHANNEL, range:0~14(unless A band !)\n");
-	ate_print("ATETXPOW0, set power level of antenna 1.\n");
-	ate_print("ATETXPOW1, set power level of antenna 2.\n");
-	ate_print("ATETXANT, set TX antenna. 0:all, 1:antenna one, 2:antenna two.\n");
-	ate_print("ATERXANT, set RX antenna.0:all, 1:antenna one, 2:antenna two, 3:antenna three.\n");
-	ate_print("ATETXFREQOFFSET, set frequency offset, range 0~63\n");
-	ate_print("ATETXBW, set BandWidth, 0:20MHz, 1:40MHz.\n");
-	ate_print("ATETXLEN, set Frame length, range 24~%d\n", (MAX_FRAME_SIZE - 34/* == 2312 */));
-	ate_print("ATETXCNT, set how many frame going to transmit.\n");
-	ate_print("ATETXMCS, set MCS, reference to rate table.\n");
-	ate_print("ATETXMODE, set Mode 0:CCK, 1:OFDM, 2:HT-Mix, 3:GreenField, reference to rate table.\n");
-	ate_print("ATETXGI, set GI interval, 0:Long, 1:Short\n");
-	ate_print("ATERXFER, 0:disable Rx Frame error rate. 1:enable Rx Frame error rate.\n");
-	ate_print("ATERRF, show all RF registers.\n");
-	ate_print("ATEWRF1, set RF1 register.\n");
-	ate_print("ATEWRF2, set RF2 register.\n");
-	ate_print("ATEWRF3, set RF3 register.\n");
-	ate_print("ATEWRF4, set RF4 register.\n");
-	ate_print("ATELDE2P, load EEPROM from .bin file.\n");
-	ate_print("ATERE2P, display all EEPROM content.\n");
-	ate_print("ATESHOW, display all parameters of ATE.\n");
-	ate_print("ATEHELP, online help.\n");
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	AsicSwitchChannel() dedicated for ATE.
-
-    ==========================================================================
-*/
-VOID ATEAsicSwitchChannel(
-    IN PRTMP_ADAPTER pAd)
-{
-	UINT32 R2 = 0, R3 = DEFAULT_RF_TX_POWER, R4 = 0, Value = 0;
-	CHAR TxPwer = 0, TxPwer2 = 0;
-	UCHAR index, BbpValue = 0, R66 = 0x30;
-	RTMP_RF_REGS *RFRegTable;
-	UCHAR Channel;
-
-#ifdef RALINK_28xx_QA
-	if ((pAd->ate.bQATxStart == TRUE) || (pAd->ate.bQARxStart == TRUE))
-	{
-		if (pAd->ate.Channel != pAd->LatchRfRegs.Channel)
-		{
-			pAd->ate.Channel = pAd->LatchRfRegs.Channel;
-		}
-		return;
-	}
-	else
-#endif // RALINK_28xx_QA //
-	Channel = pAd->ate.Channel;
-
-	// Select antenna
-	AsicAntennaSelect(pAd, Channel);
-
-	// fill Tx power value
-	TxPwer = pAd->ate.TxPower0;
-	TxPwer2 = pAd->ate.TxPower1;
-
-	RFRegTable = RF2850RegTable;
-
-	switch (pAd->RfIcType)
-	{
-		/* But only 2850 and 2750 support 5.5GHz band... */
-		case RFIC_2820:
-		case RFIC_2850:
-		case RFIC_2720:
-		case RFIC_2750:
-
-			for (index = 0; index < NUM_OF_2850_CHNL; index++)
-			{
-				if (Channel == RFRegTable[index].Channel)
-				{
-					R2 = RFRegTable[index].R2;
-					if (pAd->Antenna.field.TxPath == 1)
-					{
-						R2 |= 0x4000;	// If TXpath is 1, bit 14 = 1;
-					}
-
-					if (pAd->Antenna.field.RxPath == 2)
-					{
-						switch (pAd->ate.RxAntennaSel)
-						{
-							case 1:
-								R2 |= 0x20040;
-								ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
-								BbpValue &= 0xE4;
-								BbpValue |= 0x00;
-								ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
-								break;
-							case 2:
-								R2 |= 0x10040;
-								ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
-								BbpValue &= 0xE4;
-								BbpValue |= 0x01;
-								ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
-								break;
-							default:
-								R2 |= 0x40;
-								ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
-								BbpValue &= 0xE4;
-								/* Only enable two Antenna to receive. */
-								BbpValue |= 0x08;
-								ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
-								break;
-						}
-					}
-					else if (pAd->Antenna.field.RxPath == 1)
-					{
-						R2 |= 0x20040;	// write 1 to off RxPath
-					}
-
-					if (pAd->Antenna.field.TxPath == 2)
-					{
-						if (pAd->ate.TxAntennaSel == 1)
-						{
-							R2 |= 0x4000;	// If TX Antenna select is 1 , bit 14 = 1; Disable Ant 2
-							ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BbpValue);
-							BbpValue &= 0xE7;		//11100111B
-							ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BbpValue);
-						}
-						else if (pAd->ate.TxAntennaSel == 2)
-						{
-							R2 |= 0x8000;	// If TX Antenna select is 2 , bit 15 = 1; Disable Ant 1
-							ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BbpValue);
-							BbpValue &= 0xE7;
-							BbpValue |= 0x08;
-							ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BbpValue);
-						}
-						else
-						{
-							ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BbpValue);
-							BbpValue &= 0xE7;
-							BbpValue |= 0x10;
-							ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BbpValue);
-						}
-					}
-					if (pAd->Antenna.field.RxPath == 3)
-					{
-						switch (pAd->ate.RxAntennaSel)
-						{
-							case 1:
-								R2 |= 0x20040;
-								ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
-								BbpValue &= 0xE4;
-								BbpValue |= 0x00;
-								ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
-								break;
-							case 2:
-								R2 |= 0x10040;
-								ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
-								BbpValue &= 0xE4;
-								BbpValue |= 0x01;
-								ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
-								break;
-							case 3:
-								R2 |= 0x30000;
-								ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
-								BbpValue &= 0xE4;
-								BbpValue |= 0x02;
-								ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
-								break;
-							default:
-								ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
-								BbpValue &= 0xE4;
-								BbpValue |= 0x10;
-								ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
-								break;
-						}
-					}
-
-					if (Channel > 14)
-					{
-						// initialize R3, R4
-						R3 = (RFRegTable[index].R3 & 0xffffc1ff);
-						R4 = (RFRegTable[index].R4 & (~0x001f87c0)) | (pAd->ate.RFFreqOffset << 15);
-
-                        // According the Rory's suggestion to solve the middle range issue.
-						// 5.5G band power range: 0xF9~0X0F, TX0 Reg3 bit9/TX1 Reg4 bit6="0" means the TX power reduce 7dB
-						// R3
-						if ((TxPwer >= -7) && (TxPwer < 0))
-						{
-							TxPwer = (7+TxPwer);
-							TxPwer = (TxPwer > 0xF) ? (0xF) : (TxPwer);
-							R3 |= (TxPwer << 10);
-							ATEDBGPRINT(RT_DEBUG_TRACE, ("ATEAsicSwitchChannel: TxPwer=%d \n", TxPwer));
-						}
-						else
-						{
-							TxPwer = (TxPwer > 0xF) ? (0xF) : (TxPwer);
-							R3 |= (TxPwer << 10) | (1 << 9);
-						}
-
-						// R4
-						if ((TxPwer2 >= -7) && (TxPwer2 < 0))
-						{
-							TxPwer2 = (7+TxPwer2);
-							TxPwer2 = (TxPwer2 > 0xF) ? (0xF) : (TxPwer2);
-							R4 |= (TxPwer2 << 7);
-							ATEDBGPRINT(RT_DEBUG_TRACE, ("ATEAsicSwitchChannel: TxPwer2=%d \n", TxPwer2));
-						}
-						else
-						{
-							TxPwer2 = (TxPwer2 > 0xF) ? (0xF) : (TxPwer2);
-							R4 |= (TxPwer2 << 7) | (1 << 6);
-						}
-					}
-					else
-					{
-						R3 = (RFRegTable[index].R3 & 0xffffc1ff) | (TxPwer << 9); // set TX power0
-						R4 = (RFRegTable[index].R4 & (~0x001f87c0)) | (pAd->ate.RFFreqOffset << 15) | (TxPwer2 <<6);// Set freq offset & TxPwr1
-					}
-
-					// Based on BBP current mode before changing RF channel.
-					if (pAd->ate.TxWI.BW == BW_40)
-					{
-						R4 |=0x200000;
-					}
-
-					// Update variables
-					pAd->LatchRfRegs.Channel = Channel;
-					pAd->LatchRfRegs.R1 = RFRegTable[index].R1;
-					pAd->LatchRfRegs.R2 = R2;
-					pAd->LatchRfRegs.R3 = R3;
-					pAd->LatchRfRegs.R4 = R4;
-
-					RtmpRfIoWrite(pAd);
-
-					break;
-				}
-			}
-			break;
-
-		default:
-			break;
-	}
-
-	// Change BBP setting during switch from a->g, g->a
-	if (Channel <= 14)
-	{
-	    ULONG	TxPinCfg = 0x00050F0A;// 2007.10.09 by Brian : 0x0005050A ==> 0x00050F0A
-
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R62, (0x37 - GET_LNA_GAIN(pAd)));
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R63, (0x37 - GET_LNA_GAIN(pAd)));
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R64, (0x37 - GET_LNA_GAIN(pAd)));
-
-		/* For 1T/2R chip only... */
-	    if (pAd->NicConfig2.field.ExternalLNAForG)
-	    {
-	        ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0x62);
-	    }
-	    else
-	    {
-	        ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0x84);
-	    }
-
-        // According the Rory's suggestion to solve the middle range issue.
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R86, &BbpValue);
-		ASSERT((BbpValue == 0x00));
-		if ((BbpValue != 0x00))
-		{
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0x00);
-		}
-
-		// 5.5GHz band selection PIN, bit1 and bit2 are complement
-		RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
-		Value &= (~0x6);
-		Value |= (0x04);
-		RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
-
-        // Turn off unused PA or LNA when only 1T or 1R.
-		if (pAd->Antenna.field.TxPath == 1)
-		{
-			TxPinCfg &= 0xFFFFFFF3;
-		}
-		if (pAd->Antenna.field.RxPath == 1)
-		{
-			TxPinCfg &= 0xFFFFF3FF;
-		}
-
-		RTMP_IO_WRITE32(pAd, TX_PIN_CFG, TxPinCfg);
-	}
-	else
-	{
-	    ULONG	TxPinCfg = 0x00050F05;//2007.10.09 by Brian : 0x00050505 ==> 0x00050F05
-
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R62, (0x37 - GET_LNA_GAIN(pAd)));
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R63, (0x37 - GET_LNA_GAIN(pAd)));
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R64, (0x37 - GET_LNA_GAIN(pAd)));
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0xF2);
-
-        // According the Rory's suggestion to solve the middle range issue.
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R86, &BbpValue);
-		ASSERT((BbpValue == 0x00));
-		if ((BbpValue != 0x00))
-		{
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0x00);
-		}
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R91, &BbpValue);
-		ASSERT((BbpValue == 0x04));
-
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R92, &BbpValue);
-		ASSERT((BbpValue == 0x00));
-
-		// 5.5GHz band selection PIN, bit1 and bit2 are complement
-		RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
-		Value &= (~0x6);
-		Value |= (0x02);
-		RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
-
-        // Turn off unused PA or LNA when only 1T or 1R.
-		if (pAd->Antenna.field.TxPath == 1)
-		{
-			TxPinCfg &= 0xFFFFFFF3;
-	    }
-		if (pAd->Antenna.field.RxPath == 1)
-		{
-			TxPinCfg &= 0xFFFFF3FF;
-		}
-
-		RTMP_IO_WRITE32(pAd, TX_PIN_CFG, TxPinCfg);
-	}
-
-    // R66 should be set according to Channel and use 20MHz when scanning
-	if (Channel <= 14)
-	{
-		// BG band
-		R66 = 0x2E + GET_LNA_GAIN(pAd);
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-	}
-	else
-	{
-		// 5.5 GHz band
-		if (pAd->ate.TxWI.BW == BW_20)
-		{
-			R66 = (UCHAR)(0x32 + (GET_LNA_GAIN(pAd)*5)/3);
-    		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-		}
-		else
-		{
-			R66 = (UCHAR)(0x3A + (GET_LNA_GAIN(pAd)*5)/3);
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-		}
-	}
-
-	//
-	// On 11A, We should delay and wait RF/BBP to be stable
-	// and the appropriate time should be 1000 micro seconds
-	// 2005/06/05 - On 11G, We also need this delay time. Otherwise it's difficult to pass the WHQL.
-	//
-	RTMPusecDelay(1000);
-
-	if (Channel > 14)
-	{
-		// When 5.5GHz band the LSB of TxPwr will be used to reduced 7dB or not.
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, %dT) to , R1=0x%08lx, R2=0x%08lx, R3=0x%08lx, R4=0x%08lx\n",
-								  Channel,
-								  pAd->RfIcType,
-								  pAd->Antenna.field.TxPath,
-								  pAd->LatchRfRegs.R1,
-								  pAd->LatchRfRegs.R2,
-								  pAd->LatchRfRegs.R3,
-								  pAd->LatchRfRegs.R4));
-	}
-	else
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, Pwr0=%u, Pwr1=%u, %dT) to , R1=0x%08lx, R2=0x%08lx, R3=0x%08lx, R4=0x%08lx\n",
-								  Channel,
-								  pAd->RfIcType,
-								  (R3 & 0x00003e00) >> 9,
-								  (R4 & 0x000007c0) >> 6,
-								  pAd->Antenna.field.TxPath,
-								  pAd->LatchRfRegs.R1,
-								  pAd->LatchRfRegs.R2,
-								  pAd->LatchRfRegs.R3,
-								  pAd->LatchRfRegs.R4));
-    }
-}
-
-//
-// In fact, no one will call this routine so far !
-//
-/*
-	==========================================================================
-	Description:
-		Gives CCK TX rate 2 more dB TX power.
-		This routine works only in ATE mode.
-
-		calculate desired Tx power in RF R3.Tx0~5,	should consider -
-		0. if current radio is a noisy environment (pAd->DrsCounters.fNoisyEnvironment)
-		1. TxPowerPercentage
-		2. auto calibration based on TSSI feedback
-		3. extra 2 db for CCK
-		4. -10 db upon very-short distance (AvgRSSI >= -40db) to AP
-
-	NOTE: Since this routine requires the value of (pAd->DrsCounters.fNoisyEnvironment),
-		it should be called AFTER MlmeDynamicTxRateSwitching()
-	==========================================================================
- */
-VOID ATEAsicAdjustTxPower(
-	IN PRTMP_ADAPTER pAd)
-{
-	INT			i, j;
-	CHAR		DeltaPwr = 0;
-	BOOLEAN		bAutoTxAgc = FALSE;
-	UCHAR		TssiRef, *pTssiMinusBoundary, *pTssiPlusBoundary, TxAgcStep;
-	UCHAR		BbpR49 = 0, idx;
-	PCHAR		pTxAgcCompensate;
-	ULONG		TxPwr[5];
-	CHAR		Value;
-
-	/* no one calls this procedure so far */
-	if (pAd->ate.TxWI.BW == BW_40)
-	{
-		if (pAd->ate.Channel > 14)
-		{
-			TxPwr[0] = pAd->Tx40MPwrCfgABand[0];
-			TxPwr[1] = pAd->Tx40MPwrCfgABand[1];
-			TxPwr[2] = pAd->Tx40MPwrCfgABand[2];
-			TxPwr[3] = pAd->Tx40MPwrCfgABand[3];
-			TxPwr[4] = pAd->Tx40MPwrCfgABand[4];
-		}
-		else
-		{
-			TxPwr[0] = pAd->Tx40MPwrCfgGBand[0];
-			TxPwr[1] = pAd->Tx40MPwrCfgGBand[1];
-			TxPwr[2] = pAd->Tx40MPwrCfgGBand[2];
-			TxPwr[3] = pAd->Tx40MPwrCfgGBand[3];
-			TxPwr[4] = pAd->Tx40MPwrCfgGBand[4];
-		}
-	}
-	else
-	{
-		if (pAd->ate.Channel > 14)
-		{
-			TxPwr[0] = pAd->Tx20MPwrCfgABand[0];
-			TxPwr[1] = pAd->Tx20MPwrCfgABand[1];
-			TxPwr[2] = pAd->Tx20MPwrCfgABand[2];
-			TxPwr[3] = pAd->Tx20MPwrCfgABand[3];
-			TxPwr[4] = pAd->Tx20MPwrCfgABand[4];
-		}
-		else
-		{
-			TxPwr[0] = pAd->Tx20MPwrCfgGBand[0];
-			TxPwr[1] = pAd->Tx20MPwrCfgGBand[1];
-			TxPwr[2] = pAd->Tx20MPwrCfgGBand[2];
-			TxPwr[3] = pAd->Tx20MPwrCfgGBand[3];
-			TxPwr[4] = pAd->Tx20MPwrCfgGBand[4];
-		}
-	}
-
-	// TX power compensation for temperature variation based on TSSI.
-	// Do it per 4 seconds.
-	if (pAd->Mlme.OneSecPeriodicRound % 4 == 0)
-	{
-		if (pAd->ate.Channel <= 14)
-		{
-			/* bg channel */
-			bAutoTxAgc         = pAd->bAutoTxAgcG;
-			TssiRef            = pAd->TssiRefG;
-			pTssiMinusBoundary = &pAd->TssiMinusBoundaryG[0];
-			pTssiPlusBoundary  = &pAd->TssiPlusBoundaryG[0];
-			TxAgcStep          = pAd->TxAgcStepG;
-			pTxAgcCompensate   = &pAd->TxAgcCompensateG;
-		}
-		else
-		{
-			/* a channel */
-			bAutoTxAgc         = pAd->bAutoTxAgcA;
-			TssiRef            = pAd->TssiRefA;
-			pTssiMinusBoundary = &pAd->TssiMinusBoundaryA[0];
-			pTssiPlusBoundary  = &pAd->TssiPlusBoundaryA[0];
-			TxAgcStep          = pAd->TxAgcStepA;
-			pTxAgcCompensate   = &pAd->TxAgcCompensateA;
-		}
-
-		if (bAutoTxAgc)
-		{
-			/* BbpR49 is unsigned char */
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R49, &BbpR49);
-
-			/* (p) TssiPlusBoundaryG[0] = 0 = (m) TssiMinusBoundaryG[0] */
-			/* compensate: +4     +3   +2   +1    0   -1   -2   -3   -4 * steps */
-			/* step value is defined in pAd->TxAgcStepG for tx power value */
-
-			/* [4]+1+[4]   p4     p3   p2   p1   o1   m1   m2   m3   m4 */
-			/* ex:         0x00 0x15 0x25 0x45 0x88 0xA0 0xB5 0xD0 0xF0
-			   above value are examined in mass factory production */
-			/*             [4]    [3]  [2]  [1]  [0]  [1]  [2]  [3]  [4] */
-
-			/* plus is 0x10 ~ 0x40, minus is 0x60 ~ 0x90 */
-			/* if value is between p1 ~ o1 or o1 ~ s1, no need to adjust tx power */
-			/* if value is 0x65, tx power will be -= TxAgcStep*(2-1) */
-
-			if (BbpR49 > pTssiMinusBoundary[1])
-			{
-				// Reading is larger than the reference value.
-				// Check for how large we need to decrease the Tx power.
-				for (idx = 1; idx < 5; idx++)
-				{
-					if (BbpR49 <= pTssiMinusBoundary[idx])  // Found the range
-						break;
-				}
-				// The index is the step we should decrease, idx = 0 means there is nothing to compensate
-//				if (R3 > (ULONG) (TxAgcStep * (idx-1)))
-					*pTxAgcCompensate = -(TxAgcStep * (idx-1));
-//				else
-//					*pTxAgcCompensate = -((UCHAR)R3);
-
-				DeltaPwr += (*pTxAgcCompensate);
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("-- Tx Power, BBP R1=%x, TssiRef=%x, TxAgcStep=%x, step = -%d\n",
-					BbpR49, TssiRef, TxAgcStep, idx-1));
-			}
-			else if (BbpR49 < pTssiPlusBoundary[1])
-			{
-				// Reading is smaller than the reference value
-				// check for how large we need to increase the Tx power
-				for (idx = 1; idx < 5; idx++)
-				{
-					if (BbpR49 >= pTssiPlusBoundary[idx])   // Found the range
-						break;
-				}
-				// The index is the step we should increase, idx = 0 means there is nothing to compensate
-				*pTxAgcCompensate = TxAgcStep * (idx-1);
-				DeltaPwr += (*pTxAgcCompensate);
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("++ Tx Power, BBP R1=%x, TssiRef=%x, TxAgcStep=%x, step = +%d\n",
-					BbpR49, TssiRef, TxAgcStep, idx-1));
-			}
-			else
-			{
-				*pTxAgcCompensate = 0;
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("   Tx Power, BBP R1=%x, TssiRef=%x, TxAgcStep=%x, step = +%d\n",
-					BbpR49, TssiRef, TxAgcStep, 0));
-			}
-		}
-	}
-	else
-	{
-		if (pAd->ate.Channel <= 14)
-		{
-			bAutoTxAgc         = pAd->bAutoTxAgcG;
-			pTxAgcCompensate   = &pAd->TxAgcCompensateG;
-		}
-		else
-		{
-			bAutoTxAgc         = pAd->bAutoTxAgcA;
-			pTxAgcCompensate   = &pAd->TxAgcCompensateA;
-		}
-
-		if (bAutoTxAgc)
-			DeltaPwr += (*pTxAgcCompensate);
-	}
-
-	/* calculate delta power based on the percentage specified from UI */
-	// E2PROM setting is calibrated for maximum TX power (i.e. 100%)
-	// We lower TX power here according to the percentage specified from UI
-	if (pAd->CommonCfg.TxPowerPercentage == 0xffffffff)       // AUTO TX POWER control
-		;
-	else if (pAd->CommonCfg.TxPowerPercentage > 90)  // 91 ~ 100% & AUTO, treat as 100% in terms of mW
-		;
-	else if (pAd->CommonCfg.TxPowerPercentage > 60)  // 61 ~ 90%, treat as 75% in terms of mW
-	{
-		DeltaPwr -= 1;
-	}
-	else if (pAd->CommonCfg.TxPowerPercentage > 30)  // 31 ~ 60%, treat as 50% in terms of mW
-	{
-		DeltaPwr -= 3;
-	}
-	else if (pAd->CommonCfg.TxPowerPercentage > 15)  // 16 ~ 30%, treat as 25% in terms of mW
-	{
-		DeltaPwr -= 6;
-	}
-	else if (pAd->CommonCfg.TxPowerPercentage > 9)   // 10 ~ 15%, treat as 12.5% in terms of mW
-	{
-		DeltaPwr -= 9;
-	}
-	else                                           // 0 ~ 9 %, treat as MIN(~3%) in terms of mW
-	{
-		DeltaPwr -= 12;
-	}
-
-	/* reset different new tx power for different TX rate */
-	for(i=0; i<5; i++)
-	{
-		if (TxPwr[i] != 0xffffffff)
-		{
-			for (j=0; j<8; j++)
-			{
-				Value = (CHAR)((TxPwr[i] >> j*4) & 0x0F); /* 0 ~ 15 */
-
-				if ((Value + DeltaPwr) < 0)
-				{
-					Value = 0; /* min */
-				}
-				else if ((Value + DeltaPwr) > 0xF)
-				{
-					Value = 0xF; /* max */
-				}
-				else
-				{
-					Value += DeltaPwr; /* temperature compensation */
-				}
-
-				/* fill new value to CSR offset */
-				TxPwr[i] = (TxPwr[i] & ~(0x0000000F << j*4)) | (Value << j*4);
-			}
-
-			/* write tx power value to CSR */
-			/* TX_PWR_CFG_0 (8 tx rate) for	TX power for OFDM 12M/18M
-											TX power for OFDM 6M/9M
-											TX power for CCK5.5M/11M
-											TX power for CCK1M/2M */
-			/* TX_PWR_CFG_1 ~ TX_PWR_CFG_4 */
-			RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, TxPwr[i]);
-
-
-		}
-	}
-
-}
-
-/*
-	========================================================================
-	Routine Description:
-		Write TxWI for ATE mode.
-
-	Return Value:
-		None
-	========================================================================
-*/
-static VOID ATEWriteTxWI(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PTXWI_STRUC 	pOutTxWI,
-	IN	BOOLEAN			FRAG,
-	IN	BOOLEAN			CFACK,
-	IN	BOOLEAN			InsTimestamp,
-	IN	BOOLEAN 		AMPDU,
-	IN	BOOLEAN 		Ack,
-	IN	BOOLEAN 		NSeq,		// HW new a sequence.
-	IN	UCHAR			BASize,
-	IN	UCHAR			WCID,
-	IN	ULONG			Length,
-	IN	UCHAR 			PID,
-	IN	UCHAR			TID,
-	IN	UCHAR			TxRate,
-	IN	UCHAR			Txopmode,
-	IN	BOOLEAN			CfAck,
-	IN	HTTRANSMIT_SETTING	*pTransmit)
-{
-	TXWI_STRUC 		TxWI;
-	PTXWI_STRUC 	pTxWI;
-
-	//
-	// Always use Long preamble before verifiation short preamble functionality works well.
-	// Todo: remove the following line if short preamble functionality works
-	//
-	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
-	NdisZeroMemory(&TxWI, TXWI_SIZE);
-	pTxWI = &TxWI;
-
-	pTxWI->FRAG= FRAG;
-
-	pTxWI->CFACK = CFACK;
-	pTxWI->TS= InsTimestamp;
-	pTxWI->AMPDU = AMPDU;
-	pTxWI->ACK = Ack;
-	pTxWI->txop= Txopmode;
-
-	pTxWI->NSEQ = NSeq;
-	// John tune the performace with Intel Client in 20 MHz performance
-	if( BASize >7 )
-		BASize =7;
-
-	pTxWI->BAWinSize = BASize;
-	pTxWI->WirelessCliID = WCID;
-	pTxWI->MPDUtotalByteCount = Length;
-	pTxWI->PacketId = PID;
-
-	// If CCK or OFDM, BW must be 20
-	pTxWI->BW = (pTransmit->field.MODE <= MODE_OFDM) ? (BW_20) : (pTransmit->field.BW);
-	pTxWI->ShortGI = pTransmit->field.ShortGI;
-	pTxWI->STBC = pTransmit->field.STBC;
-
-	pTxWI->MCS = pTransmit->field.MCS;
-	pTxWI->PHYMODE = pTransmit->field.MODE;
-	pTxWI->CFACK = CfAck;
-	pTxWI->MIMOps = 0;
-	pTxWI->MpduDensity = 0;
-
-	pTxWI->PacketId = pTxWI->MCS;
-	NdisMoveMemory(pOutTxWI, &TxWI, sizeof(TXWI_STRUC));
-
-        return;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Disable protection for ATE.
-	========================================================================
-*/
-VOID ATEDisableAsicProtect(
-	IN		PRTMP_ADAPTER	pAd)
-{
-	PROT_CFG_STRUC	ProtCfg, ProtCfg4;
-	UINT32 Protect[6];
-	USHORT			offset;
-	UCHAR			i;
-	UINT32 MacReg = 0;
-
-	// Config ASIC RTS threshold register
-	RTMP_IO_READ32(pAd, TX_RTS_CFG, &MacReg);
-	MacReg &= 0xFF0000FF;
-	MacReg |= (pAd->CommonCfg.RtsThreshold << 8);
-	RTMP_IO_WRITE32(pAd, TX_RTS_CFG, MacReg);
-
-	// Initial common protection settings
-	RTMPZeroMemory(Protect, sizeof(Protect));
-	ProtCfg4.word = 0;
-	ProtCfg.word = 0;
-	ProtCfg.field.TxopAllowGF40 = 1;
-	ProtCfg.field.TxopAllowGF20 = 1;
-	ProtCfg.field.TxopAllowMM40 = 1;
-	ProtCfg.field.TxopAllowMM20 = 1;
-	ProtCfg.field.TxopAllowOfdm = 1;
-	ProtCfg.field.TxopAllowCck = 1;
-	ProtCfg.field.RTSThEn = 1;
-	ProtCfg.field.ProtectNav = ASIC_SHORTNAV;
-
-	// Handle legacy(B/G) protection
-	ProtCfg.field.ProtectRate = pAd->CommonCfg.RtsRate;
-	ProtCfg.field.ProtectCtrl = 0;
-	Protect[0] = ProtCfg.word;
-	Protect[1] = ProtCfg.word;
-
-	// NO PROTECT
-	// 1.All STAs in the BSS are 20/40 MHz HT
-	// 2. in ai 20/40MHz BSS
-	// 3. all STAs are 20MHz in a 20MHz BSS
-	// Pure HT. no protection.
-
-	// MM20_PROT_CFG
-	//	Reserved (31:27)
-	// 	PROT_TXOP(25:20) -- 010111
-	//	PROT_NAV(19:18)  -- 01 (Short NAV protection)
-	//  PROT_CTRL(17:16) -- 00 (None)
-	// 	PROT_RATE(15:0)  -- 0x4004 (OFDM 24M)
-	Protect[2] = 0x01744004;
-
-	// MM40_PROT_CFG
-	//	Reserved (31:27)
-	// 	PROT_TXOP(25:20) -- 111111
-	//	PROT_NAV(19:18)  -- 01 (Short NAV protection)
-	//  PROT_CTRL(17:16) -- 00 (None)
-	// 	PROT_RATE(15:0)  -- 0x4084 (duplicate OFDM 24M)
-	Protect[3] = 0x03f44084;
-
-	// CF20_PROT_CFG
-	//	Reserved (31:27)
-	// 	PROT_TXOP(25:20) -- 010111
-	//	PROT_NAV(19:18)  -- 01 (Short NAV protection)
-	//  PROT_CTRL(17:16) -- 00 (None)
-	// 	PROT_RATE(15:0)  -- 0x4004 (OFDM 24M)
-	Protect[4] = 0x01744004;
-
-	// CF40_PROT_CFG
-	//	Reserved (31:27)
-	// 	PROT_TXOP(25:20) -- 111111
-	//	PROT_NAV(19:18)  -- 01 (Short NAV protection)
-	//  PROT_CTRL(17:16) -- 00 (None)
-	// 	PROT_RATE(15:0)  -- 0x4084 (duplicate OFDM 24M)
-	Protect[5] = 0x03f44084;
-
-	pAd->CommonCfg.IOTestParm.bRTSLongProtOn = FALSE;
-
-	offset = CCK_PROT_CFG;
-	for (i = 0;i < 6;i++)
-		RTMP_IO_WRITE32(pAd, offset + i*4, Protect[i]);
-
-}
-
-
-/* There are two ways to convert Rssi */
-#if 1
-//
-// The way used with GET_LNA_GAIN().
-//
-CHAR ATEConvertToRssi(
-	IN PRTMP_ADAPTER pAd,
-	IN	CHAR	Rssi,
-	IN  UCHAR   RssiNumber)
-{
-	UCHAR	RssiOffset, LNAGain;
-
-	// Rssi equals to zero should be an invalid value
-	if (Rssi == 0)
-		return -99;
-
-	LNAGain = GET_LNA_GAIN(pAd);
-	if (pAd->LatchRfRegs.Channel > 14)
-	{
-		if (RssiNumber == 0)
-			RssiOffset = pAd->ARssiOffset0;
-		else if (RssiNumber == 1)
-			RssiOffset = pAd->ARssiOffset1;
-		else
-			RssiOffset = pAd->ARssiOffset2;
-	}
-	else
-	{
-		if (RssiNumber == 0)
-			RssiOffset = pAd->BGRssiOffset0;
-		else if (RssiNumber == 1)
-			RssiOffset = pAd->BGRssiOffset1;
-		else
-			RssiOffset = pAd->BGRssiOffset2;
-	}
-
-	return (-12 - RssiOffset - LNAGain - Rssi);
-}
-#else
-//
-// The way originally used in ATE of rt2860ap.
-//
-CHAR ATEConvertToRssi(
-	IN PRTMP_ADAPTER pAd,
-	IN	CHAR			Rssi,
-	IN  UCHAR   RssiNumber)
-{
-	UCHAR	RssiOffset, LNAGain;
-
-	// Rssi equals to zero should be an invalid value
-	if (Rssi == 0)
-		return -99;
-
-    if (pAd->LatchRfRegs.Channel > 14)
-    {
-        LNAGain = pAd->ALNAGain;
-        if (RssiNumber == 0)
-			RssiOffset = pAd->ARssiOffset0;
-		else if (RssiNumber == 1)
-			RssiOffset = pAd->ARssiOffset1;
-		else
-			RssiOffset = pAd->ARssiOffset2;
-    }
-    else
-    {
-        LNAGain = pAd->BLNAGain;
-        if (RssiNumber == 0)
-			RssiOffset = pAd->BGRssiOffset0;
-		else if (RssiNumber == 1)
-			RssiOffset = pAd->BGRssiOffset1;
-		else
-			RssiOffset = pAd->BGRssiOffset2;
-    }
-
-    return (-32 - RssiOffset + LNAGain - Rssi);
-}
-#endif /* end of #if 1 */
-
-/*
-	========================================================================
-
-	Routine Description:
-		Set Japan filter coefficients if needed.
-	Note:
-		This routine should only be called when
-		entering TXFRAME mode or TXCONT mode.
-
-	========================================================================
-*/
-static VOID SetJapanFilter(
-	IN		PRTMP_ADAPTER	pAd)
-{
-	UCHAR			BbpData = 0;
-
-	//
-	// If Channel=14 and Bandwidth=20M and Mode=CCK, set BBP R4 bit5=1
-	// (Japan Tx filter coefficients)when (TXFRAME or TXCONT).
-	//
-	ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BbpData);
-
-    if ((pAd->ate.TxWI.PHYMODE == MODE_CCK) && (pAd->ate.Channel == 14) && (pAd->ate.TxWI.BW == BW_20))
-    {
-        BbpData |= 0x20;    // turn on
-        ATEDBGPRINT(RT_DEBUG_TRACE, ("SetJapanFilter!!!\n"));
-    }
-    else
-    {
-		BbpData &= 0xdf;    // turn off
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ClearJapanFilter!!!\n"));
-    }
-
-	ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BbpData);
-}
-
-VOID ATESampleRssi(
-	IN PRTMP_ADAPTER	pAd,
-	IN PRXWI_STRUC		pRxWI)
-{
-	/* There are two ways to collect RSSI. */
-#if 1
-	//pAd->LastRxRate = (USHORT)((pRxWI->MCS) + (pRxWI->BW <<7) + (pRxWI->ShortGI <<8)+ (pRxWI->PHYMODE <<14)) ;
-	if (pRxWI->RSSI0 != 0)
-	{
-		pAd->ate.LastRssi0	= ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI0, RSSI_0);
-		pAd->ate.AvgRssi0X8	= (pAd->ate.AvgRssi0X8 - pAd->ate.AvgRssi0) + pAd->ate.LastRssi0;
-		pAd->ate.AvgRssi0  	= pAd->ate.AvgRssi0X8 >> 3;
-	}
-	if (pRxWI->RSSI1 != 0)
-	{
-		pAd->ate.LastRssi1	= ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI1, RSSI_1);
-		pAd->ate.AvgRssi1X8	= (pAd->ate.AvgRssi1X8 - pAd->ate.AvgRssi1) + pAd->ate.LastRssi1;
-		pAd->ate.AvgRssi1	= pAd->ate.AvgRssi1X8 >> 3;
-	}
-	if (pRxWI->RSSI2 != 0)
-	{
-		pAd->ate.LastRssi2	= ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI2, RSSI_2);
-		pAd->ate.AvgRssi2X8	= (pAd->ate.AvgRssi2X8 - pAd->ate.AvgRssi2) + pAd->ate.LastRssi2;
-		pAd->ate.AvgRssi2	= pAd->ate.AvgRssi2X8 >> 3;
-	}
-
-	pAd->ate.LastSNR0 = (CHAR)(pRxWI->SNR0);// CHAR ==> UCHAR ?
-	pAd->ate.LastSNR1 = (CHAR)(pRxWI->SNR1);// CHAR ==> UCHAR ?
-
-	pAd->ate.NumOfAvgRssiSample ++;
-#else
-	pAd->ate.LastSNR0 = (CHAR)(pRxWI->SNR0);
-	pAd->ate.LastSNR1 = (CHAR)(pRxWI->SNR1);
-	pAd->ate.RxCntPerSec++;
-	pAd->ate.LastRssi0 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI0, RSSI_0);
-	pAd->ate.LastRssi1 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI1, RSSI_1);
-	pAd->ate.LastRssi2 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI2, RSSI_2);
-	pAd->ate.AvgRssi0X8 = (pAd->ate.AvgRssi0X8 - pAd->ate.AvgRssi0) + pAd->ate.LastRssi0;
-	pAd->ate.AvgRssi0 = pAd->ate.AvgRssi0X8 >> 3;
-	pAd->ate.AvgRssi1X8 = (pAd->ate.AvgRssi1X8 - pAd->ate.AvgRssi1) + pAd->ate.LastRssi1;
-	pAd->ate.AvgRssi1 = pAd->ate.AvgRssi1X8 >> 3;
-	pAd->ate.AvgRssi2X8 = (pAd->ate.AvgRssi2X8 - pAd->ate.AvgRssi2) + pAd->ate.LastRssi2;
-	pAd->ate.AvgRssi2 = pAd->ate.AvgRssi2X8 >> 3;
-	pAd->ate.NumOfAvgRssiSample ++;
-#endif
-}
-
-#ifdef CONFIG_STA_SUPPORT
-VOID RTMPStationStop(
-    IN  PRTMP_ADAPTER   pAd)
-{
-//	BOOLEAN       Cancelled;
-
-    ATEDBGPRINT(RT_DEBUG_TRACE, ("==> RTMPStationStop\n"));
-
-#if 0
-	RTMPCancelTimer(&pAd->MlmeAux.AssocTimer,      &Cancelled);
-	RTMPCancelTimer(&pAd->MlmeAux.ReassocTimer,    &Cancelled);
-	RTMPCancelTimer(&pAd->MlmeAux.DisassocTimer,   &Cancelled);
-	RTMPCancelTimer(&pAd->MlmeAux.AuthTimer,       &Cancelled);
-	RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer,     &Cancelled);
-	RTMPCancelTimer(&pAd->MlmeAux.ScanTimer,       &Cancelled);
-#endif
-	// For rx statistics, we need to keep this timer running.
-//	RTMPCancelTimer(&pAd->Mlme.PeriodicTimer,      &Cancelled);
-
-    ATEDBGPRINT(RT_DEBUG_TRACE, ("<== RTMPStationStop\n"));
-}
-
-VOID RTMPStationStart(
-    IN  PRTMP_ADAPTER   pAd)
-{
-    ATEDBGPRINT(RT_DEBUG_TRACE, ("==> RTMPStationStart\n"));
-epAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-	//
-	// We did not cancel this timer when entering ATE mode.
-	//
-//	RTMPSetTimer(&pAd->Mlme.PeriodicTimer, MLME_TASK_EXEC_INTV);
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("<== RTMPStationStart\n"));
-}
-#endif // CONFIG_STA_SUPPORT //
-
-/*
-	==========================================================================
-	Description:
-		Setup Frame format.
-	NOTE:
-		This routine should only be used in ATE mode.
-	==========================================================================
- */
-static INT ATESetUpFrame(
-	IN PRTMP_ADAPTER pAd,
-	IN UINT32 TxIdx)
-{
-	UINT j;
-	PTXD_STRUC pTxD;
-#ifdef RT_BIG_ENDIAN
-    PTXD_STRUC      pDestTxD;
-    TXD_STRUC       TxD;
-#endif
-	PNDIS_PACKET pPacket;
-	PUCHAR pDest;
-	PVOID AllocVa;
-	NDIS_PHYSICAL_ADDRESS AllocPa;
-	HTTRANSMIT_SETTING	TxHTPhyMode;
-
-	PRTMP_TX_RING pTxRing = &pAd->TxRing[QID_AC_BE];
-	PTXWI_STRUC pTxWI = (PTXWI_STRUC) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
-	PUCHAR pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
-
-#ifdef RALINK_28xx_QA
-	PHEADER_802_11	pHeader80211;
-#endif // RALINK_28xx_QA //
-
-	if (pAd->ate.bQATxStart == TRUE)
-	{
-		// always use QID_AC_BE and FIFO_EDCA
-
-		// fill TxWI
-		TxHTPhyMode.field.BW = pAd->ate.TxWI.BW;
-		TxHTPhyMode.field.ShortGI = pAd->ate.TxWI.ShortGI;
-		TxHTPhyMode.field.STBC = 0;
-		TxHTPhyMode.field.MCS = pAd->ate.TxWI.MCS;
-		TxHTPhyMode.field.MODE = pAd->ate.TxWI.PHYMODE;
-		ATEWriteTxWI(pAd, pTxWI, pAd->ate.TxWI.FRAG, pAd->ate.TxWI.CFACK, pAd->ate.TxWI.TS,  pAd->ate.TxWI.AMPDU, pAd->ate.TxWI.ACK, pAd->ate.TxWI.NSEQ,
-			pAd->ate.TxWI.BAWinSize, 0, pAd->ate.TxWI.MPDUtotalByteCount, pAd->ate.TxWI.PacketId, 0, 0, pAd->ate.TxWI.txop/*IFS_HTTXOP*/, pAd->ate.TxWI.CFACK/*FALSE*/, &TxHTPhyMode);
-	}
-	else
-	{
-		TxHTPhyMode.field.BW = pAd->ate.TxWI.BW;
-		TxHTPhyMode.field.ShortGI = pAd->ate.TxWI.ShortGI;
-		TxHTPhyMode.field.STBC = 0;
-		TxHTPhyMode.field.MCS = pAd->ate.TxWI.MCS;
-		TxHTPhyMode.field.MODE = pAd->ate.TxWI.PHYMODE;
-		ATEWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE,  FALSE, FALSE, FALSE,
-			4, 0, pAd->ate.TxLength, 0, 0, 0, IFS_HTTXOP, FALSE, &TxHTPhyMode);
-	}
-
-	// fill 802.11 header.
-#ifdef RALINK_28xx_QA
-	if (pAd->ate.bQATxStart == TRUE)
-	{
-		NdisMoveMemory(pDMAHeaderBufVA+TXWI_SIZE, pAd->ate.Header, pAd->ate.HLen);
-	}
-	else
-#endif // RALINK_28xx_QA //
-	{
-		NdisMoveMemory(pDMAHeaderBufVA+TXWI_SIZE, TemplateFrame, LENGTH_802_11);
-		NdisMoveMemory(pDMAHeaderBufVA+TXWI_SIZE+4, pAd->ate.Addr1, ETH_LENGTH_OF_ADDRESS);
-		NdisMoveMemory(pDMAHeaderBufVA+TXWI_SIZE+10, pAd->ate.Addr2, ETH_LENGTH_OF_ADDRESS);
-		NdisMoveMemory(pDMAHeaderBufVA+TXWI_SIZE+16, pAd->ate.Addr3, ETH_LENGTH_OF_ADDRESS);
-	}
-
-#ifdef RT_BIG_ENDIAN
-	RTMPFrameEndianChange(pAd, (((PUCHAR)pDMAHeaderBufVA)+TXWI_SIZE), DIR_READ, FALSE);
-#endif // RT_BIG_ENDIAN //
-
-	/* alloc buffer for payload */
-#ifdef RALINK_28xx_QA
-	if (pAd->ate.bQATxStart == TRUE)
-	{
-		/* Why not use RTMP_AllocateTxPacketBuffer() instead of RTMP_AllocateRxPacketBuffer()? */
-		pPacket = RTMP_AllocateRxPacketBuffer(pAd, pAd->ate.DLen + 0x100, FALSE, &AllocVa, &AllocPa);
-	}
-	else
-#endif // RALINK_28xx_QA //
-	{
-		/* Why not use RTMP_AllocateTxPacketBuffer() instead of RTMP_AllocateRxPacketBuffer()? */
-		pPacket = RTMP_AllocateRxPacketBuffer(pAd, pAd->ate.TxLength, FALSE, &AllocVa, &AllocPa);
-	}
-
-	if (pPacket == NULL)
-	{
-		pAd->ate.TxCount = 0;
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("%s fail to alloc packet space.\n", __func__));
-		return -1;
-	}
-	pTxRing->Cell[TxIdx].pNextNdisPacket = pPacket;
-
-	pDest = (PUCHAR) AllocVa;
-
-#ifdef RALINK_28xx_QA
-	if (pAd->ate.bQATxStart == TRUE)
-	{
-		RTPKT_TO_OSPKT(pPacket)->len = pAd->ate.DLen;
-	}
-	else
-#endif // RALINK_28xx_QA //
-	{
-		RTPKT_TO_OSPKT(pPacket)->len = pAd->ate.TxLength - LENGTH_802_11;
-	}
-
-	// Prepare frame payload
-#ifdef RALINK_28xx_QA
-	if (pAd->ate.bQATxStart == TRUE)
-	{
-		// copy pattern
-		if ((pAd->ate.PLen != 0))
-		{
-			int j;
-
-			for (j = 0; j < pAd->ate.DLen; j+=pAd->ate.PLen)
-			{
-				memcpy(RTPKT_TO_OSPKT(pPacket)->data + j, pAd->ate.Pattern, pAd->ate.PLen);
-			}
-		}
-	}
-	else
-#endif // RALINK_28xx_QA //
-	{
-		for(j = 0; j < RTPKT_TO_OSPKT(pPacket)->len; j++)
-			pDest[j] = 0xA5;
-	}
-
-	//
-	// build Tx Descriptor
-	//
-#ifndef RT_BIG_ENDIAN
-	pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
-#else
-    pDestTxD  = (PTXD_STRUC)pTxRing->Cell[TxIdx].AllocVa;
-    TxD = *pDestTxD;
-    pTxD = &TxD;
-#endif // !RT_BIG_ENDIAN //
-
-#ifdef RALINK_28xx_QA
-	if (pAd->ate.bQATxStart == TRUE)
-	{
-		// prepare TxD
-		NdisZeroMemory(pTxD, TXD_SIZE);
-		RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
-		// build TX DESC
-		pTxD->SDPtr0 = RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
-		pTxD->SDLen0 = TXWI_SIZE + pAd->ate.HLen;
-		pTxD->LastSec0 = 0;
-		pTxD->SDPtr1 = AllocPa;
-		pTxD->SDLen1 = RTPKT_TO_OSPKT(pPacket)->len;
-		pTxD->LastSec1 = 1;
-
-		pDest = (PUCHAR)pTxWI;
-		pDest += TXWI_SIZE;
-		pHeader80211 = (PHEADER_802_11)pDest;
-
-		// modify sequence number....
-		if (pAd->ate.TxDoneCount == 0)
-		{
-			pAd->ate.seq = pHeader80211->Sequence;
-		}
-		else
-			pHeader80211->Sequence = ++pAd->ate.seq;
-	}
-	else
-#endif // RALINK_28xx_QA //
-	{
-		NdisZeroMemory(pTxD, TXD_SIZE);
-		RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
-		// build TX DESC
-		pTxD->SDPtr0 = RTMP_GetPhysicalAddressLow (pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
-		pTxD->SDLen0 = TXWI_SIZE + LENGTH_802_11;
-		pTxD->LastSec0 = 0;
-		pTxD->SDPtr1 = AllocPa;
-		pTxD->SDLen1 = RTPKT_TO_OSPKT(pPacket)->len;
-		pTxD->LastSec1 = 1;
-	}
-
-#ifdef RT_BIG_ENDIAN
-	RTMPWIEndianChange((PUCHAR)pTxWI, TYPE_TXWI);
-	RTMPFrameEndianChange(pAd, (((PUCHAR)pDMAHeaderBufVA)+TXWI_SIZE), DIR_WRITE, FALSE);
-    RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-    WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
-#endif // RT_BIG_ENDIAN //
-	return 0;
-}
-/*                                                           */
-/*                                                           */
-/*=======================End of RT2860=======================*/
-
-
-VOID rt_ee_read_all(PRTMP_ADAPTER pAd, USHORT *Data)
-{
-	USHORT i;
-	USHORT value;
-
-	for (i = 0 ; i < EEPROM_SIZE/2 ; )
-	{
-		/* "value" is expecially for some compilers... */
-		RT28xx_EEPROM_READ16(pAd, i*2, value);
-		Data[i] = value;
-		i++;
-	}
-}
-
-VOID rt_ee_write_all(PRTMP_ADAPTER pAd, USHORT *Data)
-{
-	USHORT i;
-	USHORT value;
-
-	for (i = 0 ; i < EEPROM_SIZE/2 ; )
-	{
-		/* "value" is expecially for some compilers... */
-		value = Data[i];
-		RT28xx_EEPROM_WRITE16(pAd, i*2, value);
-		i ++;
-	}
-}
-#ifdef RALINK_28xx_QA
-VOID ATE_QA_Statistics(
-	IN PRTMP_ADAPTER			pAd,
-	IN PRXWI_STRUC				pRxWI,
-	IN PRT28XX_RXD_STRUC		pRxD,
-	IN PHEADER_802_11			pHeader)
-{
-	// update counter first
-	if (pHeader != NULL)
-	{
-		if (pHeader->FC.Type == BTYPE_DATA)
-		{
-			if (pRxD->U2M)
-				pAd->ate.U2M++;
-			else
-				pAd->ate.OtherData++;
-		}
-		else if (pHeader->FC.Type == BTYPE_MGMT)
-		{
-			if (pHeader->FC.SubType == SUBTYPE_BEACON)
-				pAd->ate.Beacon++;
-			else
-				pAd->ate.OtherCount++;
-		}
-		else if (pHeader->FC.Type == BTYPE_CNTL)
-		{
-			pAd->ate.OtherCount++;
-		}
-	}
-	pAd->ate.RSSI0 = pRxWI->RSSI0;
-	pAd->ate.RSSI1 = pRxWI->RSSI1;
-	pAd->ate.RSSI2 = pRxWI->RSSI2;
-	pAd->ate.SNR0 = pRxWI->SNR0;
-	pAd->ate.SNR1 = pRxWI->SNR1;
-}
-
-/* command id with Cmd Type == 0x0008(for 28xx)/0x0005(for iNIC) */
-#define RACFG_CMD_RF_WRITE_ALL		0x0000
-#define RACFG_CMD_E2PROM_READ16		0x0001
-#define RACFG_CMD_E2PROM_WRITE16	0x0002
-#define RACFG_CMD_E2PROM_READ_ALL	0x0003
-#define RACFG_CMD_E2PROM_WRITE_ALL	0x0004
-#define RACFG_CMD_IO_READ			0x0005
-#define RACFG_CMD_IO_WRITE			0x0006
-#define RACFG_CMD_IO_READ_BULK		0x0007
-#define RACFG_CMD_BBP_READ8			0x0008
-#define RACFG_CMD_BBP_WRITE8		0x0009
-#define RACFG_CMD_BBP_READ_ALL		0x000a
-#define RACFG_CMD_GET_COUNTER		0x000b
-#define RACFG_CMD_CLEAR_COUNTER		0x000c
-
-#define RACFG_CMD_RSV1				0x000d
-#define RACFG_CMD_RSV2				0x000e
-#define RACFG_CMD_RSV3				0x000f
-
-#define RACFG_CMD_TX_START			0x0010
-#define RACFG_CMD_GET_TX_STATUS		0x0011
-#define RACFG_CMD_TX_STOP			0x0012
-#define RACFG_CMD_RX_START			0x0013
-#define RACFG_CMD_RX_STOP			0x0014
-#define RACFG_CMD_GET_NOISE_LEVEL	0x0015
-
-#define RACFG_CMD_ATE_START			0x0080
-#define RACFG_CMD_ATE_STOP			0x0081
-
-#define RACFG_CMD_ATE_START_TX_CARRIER		0x0100
-#define RACFG_CMD_ATE_START_TX_CONT			0x0101
-#define RACFG_CMD_ATE_START_TX_FRAME		0x0102
-#define RACFG_CMD_ATE_SET_BW	            0x0103
-#define RACFG_CMD_ATE_SET_TX_POWER0	        0x0104
-#define RACFG_CMD_ATE_SET_TX_POWER1			0x0105
-#define RACFG_CMD_ATE_SET_FREQ_OFFSET		0x0106
-#define RACFG_CMD_ATE_GET_STATISTICS		0x0107
-#define RACFG_CMD_ATE_RESET_COUNTER			0x0108
-#define RACFG_CMD_ATE_SEL_TX_ANTENNA		0x0109
-#define RACFG_CMD_ATE_SEL_RX_ANTENNA		0x010a
-#define RACFG_CMD_ATE_SET_PREAMBLE			0x010b
-#define RACFG_CMD_ATE_SET_CHANNEL			0x010c
-#define RACFG_CMD_ATE_SET_ADDR1				0x010d
-#define RACFG_CMD_ATE_SET_ADDR2				0x010e
-#define RACFG_CMD_ATE_SET_ADDR3				0x010f
-#define RACFG_CMD_ATE_SET_RATE				0x0110
-#define RACFG_CMD_ATE_SET_TX_FRAME_LEN		0x0111
-#define RACFG_CMD_ATE_SET_TX_FRAME_COUNT	0x0112
-#define RACFG_CMD_ATE_START_RX_FRAME		0x0113
-#define RACFG_CMD_ATE_E2PROM_READ_BULK	0x0114
-#define RACFG_CMD_ATE_E2PROM_WRITE_BULK	0x0115
-#define RACFG_CMD_ATE_IO_WRITE_BULK		0x0116
-#define RACFG_CMD_ATE_BBP_READ_BULK		0x0117
-#define RACFG_CMD_ATE_BBP_WRITE_BULK	0x0118
-#define RACFG_CMD_ATE_RF_READ_BULK		0x0119
-#define RACFG_CMD_ATE_RF_WRITE_BULK		0x011a
-
-
-
-#define A2Hex(_X, _p) 				\
-{									\
-	UCHAR *p;						\
-	_X = 0;							\
-	p = _p;							\
-	while (((*p >= 'a') && (*p <= 'f')) || ((*p >= 'A') && (*p <= 'F')) || ((*p >= '0') && (*p <= '9')))		\
-	{												\
-		if ((*p >= 'a') && (*p <= 'f'))				\
-			_X = _X * 16 + *p - 87;					\
-		else if ((*p >= 'A') && (*p <= 'F'))		\
-			_X = _X * 16 + *p - 55;					\
-		else if ((*p >= '0') && (*p <= '9'))		\
-			_X = _X * 16 + *p - 48;					\
-		p++;										\
-	}												\
-}
-
-
-static VOID memcpy_exl(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len);
-static VOID memcpy_exs(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len);
-static VOID RTMP_IO_READ_BULK(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, UINT32 len);
-
-#ifdef UCOS
-int ate_copy_to_user(
-	IN PUCHAR payload,
-	IN PUCHAR msg,
-	IN INT    len)
-{
-	memmove(payload, msg, len);
-	return 0;
-}
-
-#undef	copy_to_user
-#define copy_to_user(x,y,z) ate_copy_to_user((PUCHAR)x, (PUCHAR)y, z)
-#endif // UCOS //
-
-#define	LEN_OF_ARG 16
-
-VOID RtmpDoAte(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq)
-{
-	unsigned short Command_Id;
-	struct ate_racfghdr *pRaCfg;
-	INT	Status = NDIS_STATUS_SUCCESS;
-
-
-
-	if((pRaCfg = kmalloc(sizeof(struct ate_racfghdr), GFP_KERNEL)) == NULL)
-	{
-		Status = -EINVAL;
-		return;
-	}
-
-	NdisZeroMemory(pRaCfg, sizeof(struct ate_racfghdr));
-
-    if (copy_from_user((PUCHAR)pRaCfg, wrq->u.data.pointer, wrq->u.data.length))
-	{
-		Status = -EFAULT;
-		kfree(pRaCfg);
-		return;
-	}
-
-
-	Command_Id = ntohs(pRaCfg->command_id);
-
-	ATEDBGPRINT(RT_DEBUG_TRACE,("\n%s: Command_Id = 0x%04x !\n", __func__, Command_Id));
-
-	switch (Command_Id)
-	{
- 		// We will get this command when QA starts.
-		case RACFG_CMD_ATE_START:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_START\n"));
-
-				// prepare feedback as soon as we can to avoid QA timeout.
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_TRACE, ("copy_to_user() fail in case RACFG_CMD_ATE_START\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_START is done !\n"));
-				}
-				Set_ATE_Proc(pAdapter, "ATESTART");
-			}
-			break;
-
- 		// We will get this command either QA is closed or ated is killed by user.
-		case RACFG_CMD_ATE_STOP:
-			{
-#ifndef UCOS
-				INT32 ret;
-#endif // !UCOS //
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_STOP\n"));
-
-				// Distinguish this command came from QA(via ated)
-				// or ate daemon according to the existence of pid in payload.
-				// No need to prepare feedback if this cmd came directly from ate daemon.
-				pRaCfg->length = ntohs(pRaCfg->length);
-
-				if (pRaCfg->length == sizeof(pAdapter->ate.AtePid))
-				{
-					// This command came from QA.
-					// Get the pid of ATE daemon.
-					memcpy((UCHAR *)&pAdapter->ate.AtePid,
-						(&pRaCfg->data[0]) - 2/* == &(pRaCfg->status) */,
-						sizeof(pAdapter->ate.AtePid));
-
-					// prepare feedback as soon as we can to avoid QA timeout.
-					pRaCfg->length = htons(2);
-					pRaCfg->status = htons(0);
-
-					wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-										+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-										+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-					ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
-	            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-	            	{
-	            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_STOP\n"));
-	                    Status = -EFAULT;
-	            	}
-
-					//
-					// kill ATE daemon when leaving ATE mode.
-					// We must kill ATE daemon first before setting ATESTOP,
-					// or Microsoft will report sth. wrong.
-#ifndef UCOS
-					ret = KILL_THREAD_PID(pAdapter->ate.AtePid, SIGTERM, 1);
-					if (ret)
-					{
-						ATEDBGPRINT(RT_DEBUG_ERROR, ("%s: unable to signal thread\n", pAdapter->net_dev->name));
-					}
-#endif // !UCOS //
-				}
-
-				// AP might have in ATE_STOP mode due to cmd from QA.
-				if (ATE_ON(pAdapter))
-				{
-					// Someone has killed ate daemon while QA GUI is still open.
-					Set_ATE_Proc(pAdapter, "ATESTOP");
-					ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_AP_START is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_RF_WRITE_ALL:
-			{
-				UINT32 R1, R2, R3, R4;
-				USHORT channel;
-
-				memcpy(&R1, pRaCfg->data-2, 4);
-				memcpy(&R2, pRaCfg->data+2, 4);
-				memcpy(&R3, pRaCfg->data+6, 4);
-				memcpy(&R4, pRaCfg->data+10, 4);
-				memcpy(&channel, pRaCfg->data+14, 2);
-
-				pAdapter->LatchRfRegs.R1 = ntohl(R1);
-				pAdapter->LatchRfRegs.R2 = ntohl(R2);
-				pAdapter->LatchRfRegs.R3 = ntohl(R3);
-				pAdapter->LatchRfRegs.R4 = ntohl(R4);
-				pAdapter->LatchRfRegs.Channel = ntohs(channel);
-
-				RTMP_RF_IO_WRITE32(pAdapter, pAdapter->LatchRfRegs.R1);
-				RTMP_RF_IO_WRITE32(pAdapter, pAdapter->LatchRfRegs.R2);
-				RTMP_RF_IO_WRITE32(pAdapter, pAdapter->LatchRfRegs.R3);
-				RTMP_RF_IO_WRITE32(pAdapter, pAdapter->LatchRfRegs.R4);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_RF_WRITE_ALL\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_RF_WRITE_ALL is done !\n"));
-				}
-			}
-            break;
-
-		case RACFG_CMD_E2PROM_READ16:
-			{
-				USHORT	offset, value, tmp;
-
-				offset = ntohs(pRaCfg->status);
-				/* "tmp" is expecially for some compilers... */
-				RT28xx_EEPROM_READ16(pAdapter, offset, tmp);
-				value = tmp;
-				value = htons(value);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("EEPROM Read offset = 0x%04x, value = 0x%04x\n", offset, value));
-
-				// prepare feedback
-				pRaCfg->length = htons(4);
-				pRaCfg->status = htons(0);
-				memcpy(pRaCfg->data, &value, 2);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("sizeof(struct ate_racfghdr) = %d\n", sizeof(struct ate_racfghdr)));
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_E2PROM_READ16\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_E2PROM_READ16 is done !\n"));
-				}
-           	}
-			break;
-
-		case RACFG_CMD_E2PROM_WRITE16:
-			{
-				USHORT	offset, value;
-
-				offset = ntohs(pRaCfg->status);
-				memcpy(&value, pRaCfg->data, 2);
-				value = ntohs(value);
-				RT28xx_EEPROM_WRITE16(pAdapter, offset, value);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_E2PROM_WRITE16\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_E2PROM_WRITE16 is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_E2PROM_READ_ALL:
-			{
-				USHORT buffer[EEPROM_SIZE/2];
-
-				rt_ee_read_all(pAdapter,(USHORT *)buffer);
-				memcpy_exs(pAdapter, pRaCfg->data, (UCHAR *)buffer, EEPROM_SIZE);
-
-				// prepare feedback
-				pRaCfg->length = htons(2+EEPROM_SIZE);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_E2PROM_READ_ALL\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_E2PROM_READ_ALL is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_E2PROM_WRITE_ALL:
-			{
-				USHORT buffer[EEPROM_SIZE/2];
-
-				NdisZeroMemory((UCHAR *)buffer, EEPROM_SIZE);
-				memcpy_exs(pAdapter, (UCHAR *)buffer, (UCHAR *)&pRaCfg->status, EEPROM_SIZE);
-				rt_ee_write_all(pAdapter,(USHORT *)buffer);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_E2PROM_WRITE_ALL\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_ERROR, ("RACFG_CMD_E2PROM_WRITE_ALL is done !\n"));
-				}
-
-			}
-			break;
-
-		case RACFG_CMD_IO_READ:
-			{
-				UINT32	offset;
-				UINT32	value;
-
-				memcpy(&offset, &pRaCfg->status, 4);
-				offset = ntohl(offset);
-
-				// We do not need the base address.
-				// So just extract the offset out.
-				offset &= 0x0000FFFF;
-				RTMP_IO_READ32(pAdapter, offset, &value);
-				value = htonl(value);
-
-				// prepare feedback
-				pRaCfg->length = htons(6);
-				pRaCfg->status = htons(0);
-				memcpy(pRaCfg->data, &value, 4);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_IO_READ\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_IO_READ is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_IO_WRITE:
-			{
-				UINT32	offset, value;
-
-				memcpy(&offset, pRaCfg->data-2, 4);
-				memcpy(&value, pRaCfg->data+2, 4);
-
-				offset = ntohl(offset);
-
-				// We do not need the base address.
-				// So just extract out the offset.
-				offset &= 0x0000FFFF;
-				value = ntohl(value);
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_IO_WRITE: offset = %x, value = %x\n", offset, value));
-				RTMP_IO_WRITE32(pAdapter, offset, value);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_IO_WRITE\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_IO_WRITE is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_IO_READ_BULK:
-			{
-				UINT32	offset;
-				USHORT	len;
-
-				memcpy(&offset, &pRaCfg->status, 4);
-				offset = ntohl(offset);
-
-				// We do not need the base address.
-				// So just extract the offset.
-				offset &= 0x0000FFFF;
-				memcpy(&len, pRaCfg->data+2, 2);
-				len = ntohs(len);
-
-				if (len > 371)
-				{
-					ATEDBGPRINT(RT_DEBUG_TRACE,("len is too large, make it smaller\n"));
-					pRaCfg->length = htons(2);
-					pRaCfg->status = htons(1);
-					break;
-				}
-
-				RTMP_IO_READ_BULK(pAdapter, pRaCfg->data, (UCHAR *)offset, len*4);// unit in four bytes
-
-				// prepare feedback
-				pRaCfg->length = htons(2+len*4);// unit in four bytes
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_IO_READ_BULK\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_IO_READ_BULK is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_BBP_READ8:
-			{
-				USHORT	offset;
-				UCHAR	value;
-
-				value = 0;
-				offset = ntohs(pRaCfg->status);
-
-				if (ATE_ON(pAdapter))
-				{
-					ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, offset,  &value);
-				}
-				else
-				{
-					RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, offset,  &value);
-				}
-				// prepare feedback
-				pRaCfg->length = htons(3);
-				pRaCfg->status = htons(0);
-				pRaCfg->data[0] = value;
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("BBP value = %x\n", value));
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_BBP_READ8\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_BBP_READ8 is done !\n"));
-				}
-			}
-			break;
-		case RACFG_CMD_BBP_WRITE8:
-			{
-				USHORT	offset;
-				UCHAR	value;
-
-				offset = ntohs(pRaCfg->status);
-				memcpy(&value, pRaCfg->data, 1);
-
-				if (ATE_ON(pAdapter))
-				{
-					ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, offset,  value);
-				}
-				else
-				{
-					RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, offset,  value);
-				}
-
-				if ((offset == BBP_R1) || (offset == BBP_R3))
-				{
-					SyncTxRxConfig(pAdapter, offset, value);
-				}
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_BBP_WRITE8\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_BBP_WRITE8 is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_BBP_READ_ALL:
-			{
-				USHORT j;
-
-				for (j = 0; j < 137; j++)
-				{
-					pRaCfg->data[j] = 0;
-
-					if (ATE_ON(pAdapter))
-					{
-						ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, j,  &pRaCfg->data[j]);
-					}
-					else
-					{
-						RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, j,  &pRaCfg->data[j]);
-					}
-				}
-
-				// prepare feedback
-				pRaCfg->length = htons(2+137);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_BBP_READ_ALL\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_BBP_READ_ALL is done !\n"));
-				}
-			}
-
-			break;
-
-		case RACFG_CMD_ATE_E2PROM_READ_BULK:
-		{
-			USHORT offset;
-			USHORT len;
-			USHORT buffer[EEPROM_SIZE/2];
-
-			offset = ntohs(pRaCfg->status);
-			memcpy(&len, pRaCfg->data, 2);
-			len = ntohs(len);
-
-			rt_ee_read_all(pAdapter,(USHORT *)buffer);
-			if (offset + len <= EEPROM_SIZE)
-				memcpy_exs(pAdapter, pRaCfg->data, (UCHAR *)buffer+offset, len);
-			else
-				ATEDBGPRINT(RT_DEBUG_ERROR, ("exceed EEPROM size\n"));
-
-			// prepare feedback
-			pRaCfg->length = htons(2+len);
-			pRaCfg->status = htons(0);
-			wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            {
-            	ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_E2PROM_READ_BULK\n"));
-                Status = -EFAULT;
-            }
-			else
-			{
-               	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_E2PROM_READ_BULK is done !\n"));
-			}
-
-		}
-			break;
-
-		case RACFG_CMD_ATE_E2PROM_WRITE_BULK:
-		{
-			USHORT offset;
-			USHORT len;
-			USHORT buffer[EEPROM_SIZE/2];
-
-			offset = ntohs(pRaCfg->status);
-			memcpy(&len, pRaCfg->data, 2);
-			len = ntohs(len);
-
-			rt_ee_read_all(pAdapter,(USHORT *)buffer);
-			memcpy_exs(pAdapter, (UCHAR *)buffer + offset, (UCHAR *)pRaCfg->data + 2, len);
-			rt_ee_write_all(pAdapter,(USHORT *)buffer);
-
-			// prepare feedback
-			pRaCfg->length = htons(2);
-			pRaCfg->status = htons(0);
-			wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-								+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-								+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-            if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            {
-            	ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_E2PROM_WRITE_BULK\n"));
-                   Status = -EFAULT;
-            }
-			else
-			{
-               	ATEDBGPRINT(RT_DEBUG_ERROR, ("RACFG_CMD_ATE_E2PROM_WRITE_BULK is done !\n"));
-			}
-
-		}
-			break;
-
-		case RACFG_CMD_ATE_IO_WRITE_BULK:
-		{
-			UINT32 offset, i, value;
-			USHORT len;
-
-			memcpy(&offset, &pRaCfg->status, 4);
-			offset = ntohl(offset);
-			memcpy(&len, pRaCfg->data+2, 2);
-			len = ntohs(len);
-
-			for (i = 0; i < len; i += 4)
-			{
-				memcpy_exl(pAdapter, (UCHAR *)&value, pRaCfg->data+4+i, 4);
-				printk("Write %x %x\n", offset + i, value);
-				RTMP_IO_WRITE32(pAdapter, (offset +i) & 0xffff, value);
-			}
-
-			// prepare feedback
-			pRaCfg->length = htons(2);
-			pRaCfg->status = htons(0);
-			wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-								+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-								+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-            if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            {
-            	ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_IO_WRITE_BULK\n"));
-                   Status = -EFAULT;
-            }
-			else
-			{
-               	ATEDBGPRINT(RT_DEBUG_ERROR, ("RACFG_CMD_ATE_IO_WRITE_BULK is done !\n"));
-			}
-
-		}
-			break;
-
-		case RACFG_CMD_ATE_BBP_READ_BULK:
-		{
-			USHORT offset;
-			USHORT len;
-			USHORT j;
-
-			offset = ntohs(pRaCfg->status);
-			memcpy(&len, pRaCfg->data, 2);
-			len = ntohs(len);
-
-
-			for (j = offset; j < (offset+len); j++)
-			{
-				pRaCfg->data[j - offset] = 0;
-
-				if (pAdapter->ate.Mode == ATE_STOP)
-				{
-					RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, j,  &pRaCfg->data[j - offset]);
-				}
-				else
-				{
-					ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, j,  &pRaCfg->data[j - offset]);
-				}
-			}
-
-			// prepare feedback
-			pRaCfg->length = htons(2+len);
-			pRaCfg->status = htons(0);
-			wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-								+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-								+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            {
-            	ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_BBP_READ_BULK\n"));
-                   Status = -EFAULT;
-            }
-			else
-			{
-               	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_BBP_READ_BULK is done !\n"));
-			}
-
-		}
-			break;
-
-		case RACFG_CMD_ATE_BBP_WRITE_BULK:
-		{
-			USHORT offset;
-			USHORT len;
-			USHORT j;
-			UCHAR *value;
-
-			offset = ntohs(pRaCfg->status);
-			memcpy(&len, pRaCfg->data, 2);
-			len = ntohs(len);
-
-			for (j = offset; j < (offset+len); j++)
-			{
-				value = pRaCfg->data + 2 + (j - offset);
-				if (pAdapter->ate.Mode == ATE_STOP)
-				{
-					RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, j,  *value);
-				}
-				else
-				{
-					ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, j,  *value);
-				}
-			}
-
-			// prepare feedback
-			pRaCfg->length = htons(2);
-			pRaCfg->status = htons(0);
-			wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-								+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-								+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            {
-            	ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_BBP_WRITE_BULK\n"));
-                   Status = -EFAULT;
-            }
-			else
-			{
-               	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_BBP_WRITE_BULK is done !\n"));
-			}
-		}
-			break;
-
-#ifdef CONFIG_RALINK_RT3052
-		case RACFG_CMD_ATE_RF_READ_BULK:
-		{
-			USHORT offset;
-			USHORT len;
-			USHORT j;
-
-			offset = ntohs(pRaCfg->status);
-			memcpy(&len, pRaCfg->data, 2);
-			len = ntohs(len);
-
-			for (j = offset; j < (offset+len); j++)
-			{
-				pRaCfg->data[j - offset] = 0;
-				RT30xxReadRFRegister(pAdapter, j,  &pRaCfg->data[j - offset]);
-			}
-
-			// prepare feedback
-			pRaCfg->length = htons(2+len);
-			pRaCfg->status = htons(0);
-			wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-								+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-								+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            {
-            	ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_RF_READ_BULK\n"));
-                   Status = -EFAULT;
-            }
-			else
-			{
-               	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_RF_READ_BULK is done !\n"));
-			}
-
-		}
-			break;
-
-		case RACFG_CMD_ATE_RF_WRITE_BULK:
-		{
-			USHORT offset;
-			USHORT len;
-			USHORT j;
-			UCHAR *value;
-
-			offset = ntohs(pRaCfg->status);
-			memcpy(&len, pRaCfg->data, 2);
-			len = ntohs(len);
-
-			for (j = offset; j < (offset+len); j++)
-			{
-				value = pRaCfg->data + 2 + (j - offset);
-				RT30xxWriteRFRegister(pAdapter, j,  *value);
-			}
-
-			// prepare feedback
-			pRaCfg->length = htons(2);
-			pRaCfg->status = htons(0);
-			wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-								+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-								+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            {
-            	ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_RF_WRITE_BULK\n"));
-                   Status = -EFAULT;
-            }
-			else
-			{
-               	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_RF_WRITE_BULK is done !\n"));
-			}
-
-		}
-			break;
-#endif
-
-
-		case RACFG_CMD_GET_NOISE_LEVEL:
-			{
-				UCHAR	channel;
-				INT32   buffer[3][10];/* 3 : RxPath ; 10 : no. of per rssi samples */
-
-				channel = (ntohs(pRaCfg->status) & 0x00FF);
-				CalNoiseLevel(pAdapter, channel, buffer);
-				memcpy_exl(pAdapter, (UCHAR *)pRaCfg->data, (UCHAR *)&(buffer[0][0]), (sizeof(INT32)*3*10));
-
-				// prepare feedback
-				pRaCfg->length = htons(2 + (sizeof(INT32)*3*10));
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_GET_NOISE_LEVEL\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_GET_NOISE_LEVEL is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_GET_COUNTER:
-			{
-				memcpy_exl(pAdapter, &pRaCfg->data[0], (UCHAR *)&pAdapter->ate.U2M, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[4], (UCHAR *)&pAdapter->ate.OtherData, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[8], (UCHAR *)&pAdapter->ate.Beacon, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[12], (UCHAR *)&pAdapter->ate.OtherCount, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[16], (UCHAR *)&pAdapter->ate.TxAc0, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[20], (UCHAR *)&pAdapter->ate.TxAc1, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[24], (UCHAR *)&pAdapter->ate.TxAc2, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[28], (UCHAR *)&pAdapter->ate.TxAc3, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[32], (UCHAR *)&pAdapter->ate.TxHCCA, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[36], (UCHAR *)&pAdapter->ate.TxMgmt, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[40], (UCHAR *)&pAdapter->ate.RSSI0, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[44], (UCHAR *)&pAdapter->ate.RSSI1, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[48], (UCHAR *)&pAdapter->ate.RSSI2, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[52], (UCHAR *)&pAdapter->ate.SNR0, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[56], (UCHAR *)&pAdapter->ate.SNR1, 4);
-
-				pRaCfg->length = htons(2+60);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_GET_COUNTER\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_GET_COUNTER is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_CLEAR_COUNTER:
-			{
-				pAdapter->ate.U2M = 0;
-				pAdapter->ate.OtherData = 0;
-				pAdapter->ate.Beacon = 0;
-				pAdapter->ate.OtherCount = 0;
-				pAdapter->ate.TxAc0 = 0;
-				pAdapter->ate.TxAc1 = 0;
-				pAdapter->ate.TxAc2 = 0;
-				pAdapter->ate.TxAc3 = 0;
-				pAdapter->ate.TxHCCA = 0;
-				pAdapter->ate.TxMgmt = 0;
-				pAdapter->ate.TxDoneCount = 0;
-
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_CLEAR_COUNTER\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_CLEAR_COUNTER is done !\n"));
-				}
-			}
-
-			break;
-
-		case RACFG_CMD_TX_START:
-			{
-				USHORT *p;
-				USHORT	err = 1;
-				UCHAR   Bbp22Value = 0, Bbp24Value = 0;
-
-				if ((pAdapter->ate.TxStatus != 0) && (pAdapter->ate.Mode & ATE_TXFRAME))
-				{
-					ATEDBGPRINT(RT_DEBUG_TRACE,("Ate Tx is already running, to run next Tx, you must stop it first\n"));
-					err = 2;
-					goto TX_START_ERROR;
-				}
-				else if ((pAdapter->ate.TxStatus != 0) && !(pAdapter->ate.Mode & ATE_TXFRAME))
-				{
-					int i = 0;
-
-					while ((i++ < 10) && (pAdapter->ate.TxStatus != 0))
-					{
-						RTMPusecDelay(5000);
-					}
-
-					// force it to stop
-					pAdapter->ate.TxStatus = 0;
-					pAdapter->ate.TxDoneCount = 0;
-					//pAdapter->ate.Repeat = 0;
-					pAdapter->ate.bQATxStart = FALSE;
-				}
-
-				// If pRaCfg->length == 0, this "RACFG_CMD_TX_START" is for Carrier test or Carrier Suppression.
-				if (ntohs(pRaCfg->length) != 0)
-				{
-					// Get frame info
-
-					NdisMoveMemory(&pAdapter->ate.TxWI, pRaCfg->data + 2, 16);
-#ifdef RT_BIG_ENDIAN
-					RTMPWIEndianChange((PUCHAR)&pAdapter->ate.TxWI, TYPE_TXWI);
-#endif // RT_BIG_ENDIAN //
-
-					NdisMoveMemory(&pAdapter->ate.TxCount, pRaCfg->data + 18, 4);
-					pAdapter->ate.TxCount = ntohl(pAdapter->ate.TxCount);
-
-					p = (USHORT *)(&pRaCfg->data[22]);
-					//p = pRaCfg->data + 22;
-					// always use QID_AC_BE
-					pAdapter->ate.QID = 0;
-					p = (USHORT *)(&pRaCfg->data[24]);
-					//p = pRaCfg->data + 24;
-					pAdapter->ate.HLen = ntohs(*p);
-
-					if (pAdapter->ate.HLen > 32)
-					{
-						ATEDBGPRINT(RT_DEBUG_ERROR,("pAdapter->ate.HLen > 32\n"));
-						err = 3;
-						goto TX_START_ERROR;
-					}
-
-					NdisMoveMemory(&pAdapter->ate.Header, pRaCfg->data + 26, pAdapter->ate.HLen);
-
-
-					pAdapter->ate.PLen = ntohs(pRaCfg->length) - (pAdapter->ate.HLen + 28);
-
-					if (pAdapter->ate.PLen > 32)
-					{
-						ATEDBGPRINT(RT_DEBUG_ERROR,("pAdapter->ate.PLen > 32\n"));
-						err = 4;
-						goto TX_START_ERROR;
-					}
-
-					NdisMoveMemory(&pAdapter->ate.Pattern, pRaCfg->data + 26 + pAdapter->ate.HLen, pAdapter->ate.PLen);
-					pAdapter->ate.DLen = pAdapter->ate.TxWI.MPDUtotalByteCount - pAdapter->ate.HLen;
-				}
-
-				ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R22, &Bbp22Value);
-
-				switch (Bbp22Value)
-				{
-					case BBP22_TXFRAME:
-						{
-							if (pAdapter->ate.TxCount == 0)
-							{
-								pAdapter->ate.TxCount = 0xFFFFFFFF;
-							}
-							ATEDBGPRINT(RT_DEBUG_TRACE,("START TXFRAME\n"));
-							pAdapter->ate.bQATxStart = TRUE;
-							Set_ATE_Proc(pAdapter, "TXFRAME");
-						}
-						break;
-
-					case BBP22_TXCONT_OR_CARRSUPP:
-						{
-							ATEDBGPRINT(RT_DEBUG_TRACE,("BBP22_TXCONT_OR_CARRSUPP\n"));
-							ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, 24, &Bbp24Value);
-
-							switch (Bbp24Value)
-							{
-								case BBP24_TXCONT:
-									{
-										ATEDBGPRINT(RT_DEBUG_TRACE,("START TXCONT\n"));
-										pAdapter->ate.bQATxStart = TRUE;
-										Set_ATE_Proc(pAdapter, "TXCONT");
-									}
-									break;
-
-								case BBP24_CARRSUPP:
-									{
-										ATEDBGPRINT(RT_DEBUG_TRACE,("START TXCARRSUPP\n"));
-										pAdapter->ate.bQATxStart = TRUE;
-										pAdapter->ate.Mode |= ATE_TXCARRSUPP;
-									}
-									break;
-
-								default:
-									{
-										ATEDBGPRINT(RT_DEBUG_ERROR,("Unknown Start TX subtype !"));
-									}
-									break;
-							}
-						}
-						break;
-
-					case BBP22_TXCARR:
-						{
-							ATEDBGPRINT(RT_DEBUG_TRACE,("START TXCARR\n"));
-							pAdapter->ate.bQATxStart = TRUE;
-							Set_ATE_Proc(pAdapter, "TXCARR");
-						}
-						break;
-
-					default:
-						{
-							ATEDBGPRINT(RT_DEBUG_ERROR,("Unknown Start TX subtype !"));
-						}
-						break;
-				}
-
-				if (pAdapter->ate.bQATxStart == TRUE)
-				{
-					// prepare feedback
-					pRaCfg->length = htons(2);
-					pRaCfg->status = htons(0);
-
-					wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-										+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-										+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-	            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-	            	{
-	            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() was failed in case RACFG_CMD_TX_START\n"));
-	                    Status = -EFAULT;
-	            	}
-					else
-					{
-	                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_TX_START is done !\n"));
-					}
-					break;
-				}
-
-TX_START_ERROR:
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(err);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_TX_START\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("feedback of TX_START_ERROR is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_GET_TX_STATUS:
-			{
-				UINT32 count;
-
-				// prepare feedback
-				pRaCfg->length = htons(6);
-				pRaCfg->status = htons(0);
-				count = htonl(pAdapter->ate.TxDoneCount);
-				NdisMoveMemory(pRaCfg->data, &count, 4);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_GET_TX_STATUS\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_GET_TX_STATUS is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_TX_STOP:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_TX_STOP\n"));
-
-				Set_ATE_Proc(pAdapter, "TXSTOP");
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_TRACE, ("copy_to_user() fail in case RACFG_CMD_TX_STOP\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_TX_STOP is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_RX_START:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_RX_START\n"));
-
-				pAdapter->ate.bQARxStart = TRUE;
-				Set_ATE_Proc(pAdapter, "RXFRAME");
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_RX_START\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_RX_START is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_RX_STOP:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_RX_STOP\n"));
-
-				Set_ATE_Proc(pAdapter, "RXSTOP");
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_RX_STOP\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_RX_STOP is done !\n"));
-				}
-			}
-			break;
-
-		/* The following cases are for new ATE GUI(not QA). */
-		/*==================================================*/
-		case RACFG_CMD_ATE_START_TX_CARRIER:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_START_TX_CARRIER\n"));
-
-				Set_ATE_Proc(pAdapter, "TXCARR");
-
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_START_TX_CARRIER\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_START_TX_CARRIER is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_START_TX_CONT:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_START_TX_CONT\n"));
-
-				Set_ATE_Proc(pAdapter, "TXCONT");
-
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_START_TX_CONT\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_START_TX_CONT is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_START_TX_FRAME:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_START_TX_FRAME\n"));
-
-				Set_ATE_Proc(pAdapter, "TXFRAME");
-
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_START_TX_FRAME\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_START_TX_FRAME is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_BW:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_BW\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-
-				Set_ATE_TX_BW_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_BW\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_BW is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_TX_POWER0:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_TX_POWER0\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_TX_POWER0_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_TX_POWER0\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_TX_POWER0 is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_TX_POWER1:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_TX_POWER1\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_TX_POWER1_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_TX_POWER1\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_TX_POWER1 is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_FREQ_OFFSET:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_FREQ_OFFSET\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_TX_FREQOFFSET_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_FREQ_OFFSET\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_FREQ_OFFSET is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_GET_STATISTICS:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_GET_STATISTICS\n"));
-
-				memcpy_exl(pAdapter, &pRaCfg->data[0], (UCHAR *)&pAdapter->ate.TxDoneCount, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[4], (UCHAR *)&pAdapter->WlanCounters.RetryCount.u.LowPart, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[8], (UCHAR *)&pAdapter->WlanCounters.FailedCount.u.LowPart, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[12], (UCHAR *)&pAdapter->WlanCounters.RTSSuccessCount.u.LowPart, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[16], (UCHAR *)&pAdapter->WlanCounters.RTSFailureCount.u.LowPart, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[20], (UCHAR *)&pAdapter->WlanCounters.ReceivedFragmentCount.QuadPart, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[24], (UCHAR *)&pAdapter->WlanCounters.FCSErrorCount.u.LowPart, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[28], (UCHAR *)&pAdapter->Counters8023.RxNoBuffer, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[32], (UCHAR *)&pAdapter->WlanCounters.FrameDuplicateCount.u.LowPart, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[36], (UCHAR *)&pAdapter->RalinkCounters.OneSecFalseCCACnt, 4);
-
-				if (pAdapter->ate.RxAntennaSel == 0)
-				{
-					INT32 RSSI0 = 0;
-					INT32 RSSI1 = 0;
-					INT32 RSSI2 = 0;
-
-					RSSI0 = (INT32)(pAdapter->ate.LastRssi0 - pAdapter->BbpRssiToDbmDelta);
-					RSSI1 = (INT32)(pAdapter->ate.LastRssi1 - pAdapter->BbpRssiToDbmDelta);
-					RSSI2 = (INT32)(pAdapter->ate.LastRssi2 - pAdapter->BbpRssiToDbmDelta);
-					memcpy_exl(pAdapter, &pRaCfg->data[40], (UCHAR *)&RSSI0, 4);
-					memcpy_exl(pAdapter, &pRaCfg->data[44], (UCHAR *)&RSSI1, 4);
-					memcpy_exl(pAdapter, &pRaCfg->data[48], (UCHAR *)&RSSI2, 4);
-					pRaCfg->length = htons(2+52);
-				}
-				else
-				{
-					INT32 RSSI0 = 0;
-
-					RSSI0 = (INT32)(pAdapter->ate.LastRssi0 - pAdapter->BbpRssiToDbmDelta);
-					memcpy_exl(pAdapter, &pRaCfg->data[40], (UCHAR *)&RSSI0, 4);
-					pRaCfg->length = htons(2+44);
-				}
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_GET_STATISTICS\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_GET_STATISTICS is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_RESET_COUNTER:
-			{
-				SHORT    value = 1;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_RESET_COUNTER\n"));
-
-				sprintf((PCHAR)str, "%d", value);
-				Set_ResetStatCounter_Proc(pAdapter, str);
-
-				pAdapter->ate.TxDoneCount = 0;
-
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_RESET_COUNTER\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_RESET_COUNTER is done !\n"));
-				}
-			}
-
-			break;
-
-		case RACFG_CMD_ATE_SEL_TX_ANTENNA:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SEL_TX_ANTENNA\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_TX_Antenna_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SEL_TX_ANTENNA\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SEL_TX_ANTENNA is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SEL_RX_ANTENNA:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SEL_RX_ANTENNA\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_RX_Antenna_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SEL_RX_ANTENNA\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SEL_RX_ANTENNA is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_PREAMBLE:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_PREAMBLE\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_TX_MODE_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_PREAMBLE\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_PREAMBLE is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_CHANNEL:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_CHANNEL\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_CHANNEL_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_CHANNEL\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_CHANNEL is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_ADDR1:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_ADDR1\n"));
-
-				// Addr is an array of UCHAR,
-				// so no need to perform endian swap.
-				memcpy(pAdapter->ate.Addr1, (PUCHAR)(pRaCfg->data - 2), MAC_ADDR_LEN);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_ADDR1\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-					ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_ADDR1 is done !\n (ADDR1 = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAdapter->ate.Addr1[0],
-						pAdapter->ate.Addr1[1], pAdapter->ate.Addr1[2], pAdapter->ate.Addr1[3], pAdapter->ate.Addr1[4], pAdapter->ate.Addr1[5]));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_ADDR2:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_ADDR2\n"));
-
-				// Addr is an array of UCHAR,
-				// so no need to perform endian swap.
-				memcpy(pAdapter->ate.Addr2, (PUCHAR)(pRaCfg->data - 2), MAC_ADDR_LEN);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_ADDR2\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-					ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_ADDR2 is done !\n (ADDR2 = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAdapter->ate.Addr2[0],
-						pAdapter->ate.Addr2[1], pAdapter->ate.Addr2[2], pAdapter->ate.Addr2[3], pAdapter->ate.Addr2[4], pAdapter->ate.Addr2[5]));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_ADDR3:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_ADDR3\n"));
-
-				// Addr is an array of UCHAR,
-				// so no need to perform endian swap.
-				memcpy(pAdapter->ate.Addr3, (PUCHAR)(pRaCfg->data - 2), MAC_ADDR_LEN);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_ADDR3\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-					ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_ADDR3 is done !\n (ADDR3 = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAdapter->ate.Addr3[0],
-						pAdapter->ate.Addr3[1], pAdapter->ate.Addr3[2], pAdapter->ate.Addr3[3], pAdapter->ate.Addr3[4], pAdapter->ate.Addr3[5]));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_RATE:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_RATE\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_TX_MCS_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_RATE\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_RATE is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_TX_FRAME_LEN:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_TX_FRAME_LEN\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_TX_LENGTH_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_TX_FRAME_LEN\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_TX_FRAME_LEN is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_TX_FRAME_COUNT:
-			{
-				USHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_TX_FRAME_COUNT\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				/* TX_FRAME_COUNT == 0 means tx infinitely */
-				if (value == 0)
-				{
-					/* Use TxCount = 0xFFFFFFFF to approximate the infinity. */
-					pAdapter->ate.TxCount = 0xFFFFFFFF;
-					ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_COUNT_Proc (TxCount = %d)\n", pAdapter->ate.TxCount));
-					ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_COUNT_Proc Success\n"));
-
-
-				}
-				else
-				{
-					sprintf((PCHAR)str, "%d", value);
-					Set_ATE_TX_COUNT_Proc(pAdapter, str);
-				}
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_TX_FRAME_COUNT\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_TX_FRAME_COUNT is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_START_RX_FRAME:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_RX_START\n"));
-
-				Set_ATE_Proc(pAdapter, "RXFRAME");
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_RX_START\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_RX_START is done !\n"));
-				}
-			}
-			break;
-		default:
-			break;
-	}
-    ASSERT(pRaCfg != NULL);
-    if (pRaCfg != NULL)
-    {
-    kfree(pRaCfg);
-    }
-	return;
-}
-
-VOID BubbleSort(INT32 n, INT32 a[])
-{
-	INT32 k, j, temp;
-
-	for (k = n-1;  k>0;  k--)
-	{
-		for (j = 0; j<k; j++)
-		{
-			if(a[j] > a[j+1])
-			{
-				temp = a[j];
-				a[j]=a[j+1];
-				a[j+1]=temp;
-			}
-		}
-	}
-}
-
-VOID CalNoiseLevel(PRTMP_ADAPTER pAd, UCHAR channel, INT32 RSSI[3][10])
-{
-	INT32		RSSI0, RSSI1, RSSI2;
- 	CHAR		Rssi0Offset, Rssi1Offset, Rssi2Offset;
-	UCHAR		BbpR50Rssi0 = 0, BbpR51Rssi1 = 0, BbpR52Rssi2 = 0;
-	UCHAR		Org_BBP66value = 0, Org_BBP69value = 0, Org_BBP70value = 0, data = 0;
-	USHORT		LNA_Gain = 0;
-	INT32       j = 0;
-	UCHAR		Org_Channel = pAd->ate.Channel;
-	USHORT	    GainValue = 0, OffsetValue = 0;
-
-	ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66, &Org_BBP66value);
-	ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R69, &Org_BBP69value);
-	ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R70, &Org_BBP70value);
-
-	//**********************************************************************
-	// Read the value of LNA gain and Rssi offset
-	//**********************************************************************
-	RT28xx_EEPROM_READ16(pAd, EEPROM_LNA_OFFSET, GainValue);
-
-	// for Noise Level
-	if (channel <= 14)
-	{
-		LNA_Gain = GainValue & 0x00FF;
-
-		RT28xx_EEPROM_READ16(pAd, EEPROM_RSSI_BG_OFFSET, OffsetValue);
-		Rssi0Offset = OffsetValue & 0x00FF;
-		Rssi1Offset = (OffsetValue & 0xFF00) >> 8;
-		RT28xx_EEPROM_READ16(pAd, (EEPROM_RSSI_BG_OFFSET + 2)/* 0x48 */, OffsetValue);
-		Rssi2Offset = OffsetValue & 0x00FF;
-	}
-	else
-	{
-		LNA_Gain = (GainValue & 0xFF00) >> 8;
-
-		RT28xx_EEPROM_READ16(pAd, EEPROM_RSSI_A_OFFSET, OffsetValue);
-		Rssi0Offset = OffsetValue & 0x00FF;
-		Rssi1Offset = (OffsetValue & 0xFF00) >> 8;
-		RT28xx_EEPROM_READ16(pAd, (EEPROM_RSSI_A_OFFSET + 2)/* 0x4C */, OffsetValue);
-		Rssi2Offset = OffsetValue & 0x00FF;
-	}
-	//**********************************************************************
-	{
-		pAd->ate.Channel = channel;
-		ATEAsicSwitchChannel(pAd);
-		mdelay(5);
-
-		data = 0x10;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, data);
-		data = 0x40;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, data);
-		data = 0x40;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, data);
-		mdelay(5);
-
-		// Start Rx
-		pAd->ate.bQARxStart = TRUE;
-		Set_ATE_Proc(pAd, "RXFRAME");
-
-		mdelay(5);
-
-		for (j = 0; j < 10; j++)
-		{
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R50, &BbpR50Rssi0);
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R51, &BbpR51Rssi1);
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R52, &BbpR52Rssi2);
-
-			mdelay(10);
-
-			// Calculate RSSI 0
-			if (BbpR50Rssi0 == 0)
-			{
-				RSSI0 = -100;
-			}
-			else
-			{
-				RSSI0 = (INT32)(-12 - BbpR50Rssi0 - LNA_Gain - Rssi0Offset);
-			}
-			RSSI[0][j] = RSSI0;
-
-			if ( pAd->Antenna.field.RxPath >= 2 ) // 2R
-			{
-				// Calculate RSSI 1
-				if (BbpR51Rssi1 == 0)
-				{
-					RSSI1 = -100;
-				}
-				else
-				{
-					RSSI1 = (INT32)(-12 - BbpR51Rssi1 - LNA_Gain - Rssi1Offset);
-				}
-				RSSI[1][j] = RSSI1;
-			}
-
-			if ( pAd->Antenna.field.RxPath >= 3 ) // 3R
-			{
-				// Calculate RSSI 2
-				if (BbpR52Rssi2 == 0)
-					RSSI2 = -100;
-				else
-					RSSI2 = (INT32)(-12 - BbpR52Rssi2 - LNA_Gain - Rssi2Offset);
-
-				RSSI[2][j] = RSSI2;
-			}
-		}
-
-		// Stop Rx
-		Set_ATE_Proc(pAd, "RXSTOP");
-
-		mdelay(5);
-
-#if 0// Debug Message................
-		ate_print("\n**********************************************************\n");
-		ate_print("Noise Level: Channel %d\n", channel);
-		ate_print("RSSI0 = %d, %d, %d, %d, %d, %d, %d, %d, %d, %d\n",
-			RSSI[0][0], RSSI[0][1], RSSI[0][2],
-			RSSI[0][3], RSSI[0][4], RSSI[0][5],
-			RSSI[0][6], RSSI[0][7], RSSI[0][8],
-			RSSI[0][9]);
-		if ( pAd->Antenna.field.RxPath >= 2 ) // 2R
-		{
-			ate_print("RSSI1 = %d, %d, %d, %d, %d, %d, %d, %d, %d, %d\n",
-				RSSI[1][0], RSSI[1][1], RSSI[1][2],
-				RSSI[1][3], RSSI[1][4], RSSI[1][5],
-				RSSI[1][6], RSSI[1][7], RSSI[1][8],
-				RSSI[1][9]);
-		}
-		if ( pAd->Antenna.field.RxPath >= 3 ) // 3R
-		{
-			ate_print("RSSI2 = %d, %d, %d, %d, %d, %d, %d, %d, %d, %d\n",
-				RSSI[2][0], RSSI[2][1], RSSI[2][2],
-				RSSI[2][3], RSSI[2][4], RSSI[2][5],
-				RSSI[2][6], RSSI[2][7], RSSI[2][8],
-				RSSI[2][9]);
-		}
-#endif // 0 //
-		BubbleSort(10, RSSI[0]);	// 1R
-
-		if ( pAd->Antenna.field.RxPath >= 2 ) // 2R
-		{
-			BubbleSort(10, RSSI[1]);
-		}
-
-		if ( pAd->Antenna.field.RxPath >= 3 ) // 3R
-		{
-			BubbleSort(10, RSSI[2]);
-		}
-
-#if 0// Debug Message................
-		ate_print("\nAfter Sorting....Channel %d\n", channel);
-		ate_print("RSSI0 = %d, %d, %d, %d, %d, %d, %d, %d, %d, %d\n",
-			RSSI[0][0], RSSI[0][1], RSSI[0][2],
-			RSSI[0][3], RSSI[0][4], RSSI[0][5],
-			RSSI[0][6], RSSI[0][7], RSSI[0][8],
-			RSSI[0][9]);
-		if ( pAd->Antenna.field.RxPath >= 2 ) // 2R
-		{
-			ate_print("RSSI1 = %d, %d, %d, %d, %d, %d, %d, %d, %d, %d\n",
-				RSSI[1][0], RSSI[1][1], RSSI[1][2],
-				RSSI[1][3], RSSI[1][4], RSSI[1][5],
-				RSSI[1][6], RSSI[1][7], RSSI[1][8],
-				RSSI[1][9]);
-		}
-		if ( pAd->Antenna.field.RxPath >= 3 ) // 3R
-		{
-			ate_print("RSSI2 = %d, %d, %d, %d, %d, %d, %d, %d, %d, %d\n",
-				RSSI[2][0], RSSI[2][1], RSSI[2][2],
-				RSSI[2][3], RSSI[2][4], RSSI[2][5],
-				RSSI[2][6], RSSI[2][7], RSSI[2][8],
-				RSSI[2][9]);
-		}
-		ate_print("**********************************************************\n");
-#endif // 0 //
-	}
-
-	pAd->ate.Channel = Org_Channel;
-	ATEAsicSwitchChannel(pAd);
-
-	// Restore original value
-    ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, Org_BBP66value);
-    ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, Org_BBP69value);
-    ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, Org_BBP70value);
-
-	return;
-}
-
-BOOLEAN SyncTxRxConfig(PRTMP_ADAPTER pAd, USHORT offset, UCHAR value)
-{
-	UCHAR tmp = 0, bbp_data = 0;
-
-	if (ATE_ON(pAd))
-	{
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, offset, &bbp_data);
-	}
-	else
-	{
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, offset, &bbp_data);
-	}
-
-	/* confirm again */
-	ASSERT(bbp_data == value);
-
-	switch(offset)
-	{
-		case BBP_R1:
-			/* Need to sync. tx configuration with legacy ATE. */
-			tmp = (bbp_data & ((1 << 4) | (1 << 3))/* 0x18 */) >> 3;
-		    switch(tmp)
-		    {
-				/* The BBP R1 bit[4:3] = 2 :: Both DACs will be used by QA. */
-		        case 2:
-					/* All */
-					pAd->ate.TxAntennaSel = 0;
-		            break;
-				/* The BBP R1 bit[4:3] = 0 :: DAC 0 will be used by QA. */
-		        case 0:
-					/* Antenna one */
-					pAd->ate.TxAntennaSel = 1;
-		            break;
-				/* The BBP R1 bit[4:3] = 1 :: DAC 1 will be used by QA. */
-		        case 1:
-					/* Antenna two */
-					pAd->ate.TxAntennaSel = 2;
-		            break;
-		        default:
-		            DBGPRINT(RT_DEBUG_TRACE, ("%s -- Sth. wrong!  : return FALSE; \n", __func__));
-		            return FALSE;
-		    }
-			break;/* case BBP_R1 */
-
-		case BBP_R3:
-			/* Need to sync. rx configuration with legacy ATE. */
-			tmp = (bbp_data & ((1 << 1) | (1 << 0))/* 0x03 */);
-		    switch(tmp)
-		    {
-				/* The BBP R3 bit[1:0] = 3 :: All ADCs will be used by QA. */
-		        case 3:
-					/* All */
-					pAd->ate.RxAntennaSel = 0;
-		            break;
-				/* The BBP R3 bit[1:0] = 0 :: ADC 0 will be used by QA, */
-				/* unless the BBP R3 bit[4:3] = 2 */
-		        case 0:
-					/* Antenna one */
-					pAd->ate.RxAntennaSel = 1;
-					tmp = ((bbp_data & ((1 << 4) | (1 << 3))/* 0x03 */) >> 3);
-					if (tmp == 2)// 3R
-					{
-						/* Default : All ADCs will be used by QA */
-						pAd->ate.RxAntennaSel = 0;
-					}
-		            break;
-				/* The BBP R3 bit[1:0] = 1 :: ADC 1 will be used by QA. */
-		        case 1:
-					/* Antenna two */
-					pAd->ate.RxAntennaSel = 2;
-		            break;
-				/* The BBP R3 bit[1:0] = 2 :: ADC 2 will be used by QA. */
-		        case 2:
-					/* Antenna three */
-					pAd->ate.RxAntennaSel = 3;
-		            break;
-		        default:
-		            DBGPRINT(RT_DEBUG_ERROR, ("%s -- Impossible!  : return FALSE; \n", __func__));
-		            return FALSE;
-		    }
-			break;/* case BBP_R3 */
-
-        default:
-            DBGPRINT(RT_DEBUG_ERROR, ("%s -- Sth. wrong!  : return FALSE; \n", __func__));
-            return FALSE;
-
-	}
-	return TRUE;
-}
-
-static VOID memcpy_exl(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len)
-{
-	ULONG i, Value = 0;
-	ULONG *pDst, *pSrc;
-	UCHAR *p8;
-
-	p8 = src;
-	pDst = (ULONG *) dst;
-	pSrc = (ULONG *) src;
-
-	for (i = 0 ; i < (len/4); i++)
-	{
-		/* For alignment issue, we need a variable "Value". */
-		memmove(&Value, pSrc, 4);
-		Value = htonl(Value);
-		memmove(pDst, &Value, 4);
-		pDst++;
-		pSrc++;
-	}
-	if ((len % 4) != 0)
-	{
-		/* wish that it will never reach here */
-		memmove(&Value, pSrc, (len % 4));
-		Value = htonl(Value);
-		memmove(pDst, &Value, (len % 4));
-	}
-}
-
-static VOID memcpy_exs(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len)
-{
-	ULONG i;
-	UCHAR *pDst, *pSrc;
-
-	pDst = dst;
-	pSrc = src;
-
-	for (i = 0; i < (len/2); i++)
-	{
-		memmove(pDst, pSrc, 2);
-		*((USHORT *)pDst) = htons(*((USHORT *)pDst));
-		pDst+=2;
-		pSrc+=2;
-	}
-
-	if ((len % 2) != 0)
-	{
-		memmove(pDst, pSrc, 1);
-	}
-}
-
-static VOID RTMP_IO_READ_BULK(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, UINT32 len)
-{
-	UINT32 i, Value;
-	UINT32 *pDst, *pSrc;
-
-	pDst = (UINT32 *) dst;
-	pSrc = (UINT32 *) src;
-
-	for (i = 0 ; i < (len/4); i++)
-	{
-		RTMP_IO_READ32(pAd, (ULONG)pSrc, &Value);
-		Value = htonl(Value);
-		memmove(pDst, &Value, 4);
-		pDst++;
-		pSrc++;
-	}
-	return;
-}
-
-// TODO:
-#if 0
-/* These work only when RALINK_ATE is defined */
-INT Set_TxStart_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG value = simple_strtol(arg, 0, 10);
-	UCHAR buffer[26] = {0x88, 0x02, 0x2c, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x00, 0x55, 0x44, 0x33, 0x22, 0x11, 0xc0, 0x22, 0x00, 0x00};
-	POS_COOKIE pObj;
-
-	if (pAd->ate.TxStatus != 0)
-		return FALSE;
-
-	pAd->ate.TxInfo = 0x04000000;
-	bzero(&pAd->ate.TxWI, sizeof(TXWI_STRUC));
-	pAd->ate.TxWI.PHYMODE = 0;// MODE_CCK
-	pAd->ate.TxWI.MPDUtotalByteCount = 1226;
-	pAd->ate.TxWI.MCS = 3;
-	//pAd->ate.Mode = ATE_START;
-	pAd->ate.Mode |= ATE_TXFRAME;
-	pAd->ate.TxCount = value;
-	pAd->ate.QID = 0;
-	pAd->ate.HLen = 26;
-	pAd->ate.PLen = 0;
-	pAd->ate.DLen = 1200;
-	memcpy(pAd->ate.Header, buffer, 26);
-	pAd->ate.bQATxStart = TRUE;
-	//pObj = (POS_COOKIE) pAd->OS_Cookie;
-	//tasklet_hi_schedule(&pObj->AteTxTask);
-	return TRUE;
-}
-#endif  /* end of #if 0 */
-
-INT Set_TxStop_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ATEDBGPRINT(RT_DEBUG_TRACE,("Set_TxStop_Proc\n"));
-
-	if (Set_ATE_Proc(pAd, "TXSTOP"))
-	{
-	return TRUE;
-}
-	else
-	{
-		return FALSE;
-	}
-}
-
-INT Set_RxStop_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ATEDBGPRINT(RT_DEBUG_TRACE,("Set_RxStop_Proc\n"));
-
-	if (Set_ATE_Proc(pAd, "RXSTOP"))
-	{
-	return TRUE;
-}
-	else
-	{
-		return FALSE;
-	}
-}
-
-#if 0
-INT Set_EEWrite_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	USHORT offset = 0, value;
-	PUCHAR p2 = arg;
-
-	while((*p2 != ':') && (*p2 != '\0'))
-	{
-		p2++;
-	}
-
-	if (*p2 == ':')
-	{
-		A2Hex(offset, arg);
-		A2Hex(value, p2+ 1);
-	}
-	else
-	{
-		A2Hex(value, arg);
-	}
-
-	if (offset >= EEPROM_SIZE)
-	{
-		ate_print("Offset can not exceed EEPROM_SIZE( == 0x%04x)\n", EEPROM_SIZE);
-		return FALSE;
-	}
-
-	RTMP_EEPROM_WRITE16(pAd, offset, value);
-
-	return TRUE;
-}
-
-INT Set_BBPRead_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UCHAR value = 0, offset;
-
-	A2Hex(offset, arg);
-
-	if (ATE_ON(pAd))
-	{
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, offset,  &value);
-	}
-	else
-	{
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, offset,  &value);
-	}
-
-	ate_print("%x\n", value);
-
-	return TRUE;
-}
-
-
-INT Set_BBPWrite_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	USHORT offset = 0;
-	PUCHAR p2 = arg;
-	UCHAR value;
-
-	while((*p2 != ':') && (*p2 != '\0'))
-	{
-		p2++;
-	}
-
-	if (*p2 == ':')
-	{
-		A2Hex(offset, arg);
-		A2Hex(value, p2+ 1);
-	}
-	else
-	{
-		A2Hex(value, arg);
-	}
-
-	if (ATE_ON(pAd))
-	{
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, offset,  value);
-	}
-	else
-	{
-		RTNP_BBP_IO_WRITE8_BY_REG_ID(pAd, offset,  value);
-	}
-
-	return TRUE;
-}
-
-INT Set_RFWrite_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	PUCHAR p2, p3, p4;
-	ULONG R1, R2, R3, R4;
-
-	p2 = arg;
-
-	while((*p2 != ':') && (*p2 != '\0'))
-	{
-		p2++;
-	}
-
-	if (*p2 != ':')
-		return FALSE;
-
-	p3 = p2 + 1;
-
-	while((*p3 != ':') && (*p3 != '\0'))
-	{
-		p3++;
-	}
-
-	if (*p3 != ':')
-		return FALSE;
-
-	p4 = p3 + 1;
-
-	while((*p4 != ':') && (*p4 != '\0'))
-	{
-		p4++;
-	}
-
-	if (*p4 != ':')
-		return FALSE;
-
-
-	A2Hex(R1, arg);
-	A2Hex(R2, p2 + 1);
-	A2Hex(R3, p3 + 1);
-	A2Hex(R4, p4 + 1);
-
-	RTMP_RF_IO_WRITE32(pAd, R1);
-	RTMP_RF_IO_WRITE32(pAd, R2);
-	RTMP_RF_IO_WRITE32(pAd, R3);
-	RTMP_RF_IO_WRITE32(pAd, R4);
-
-	return TRUE;
-}
-#endif  // end of #if 0 //
-#endif	// RALINK_28xx_QA //
-
-#endif	// RALINK_ATE //
-
diff --git a/drivers/staging/rt2860/rt_ate.h b/drivers/staging/rt2860/rt_ate.h
deleted file mode 100644
index 38f5c4af546..00000000000
--- a/drivers/staging/rt2860/rt_ate.h
+++ /dev/null
@@ -1,347 +0,0 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-#ifndef __ATE_H__
-#define __ATE_H__
-
-#ifndef UCOS
-#define ate_print printk
-#define ATEDBGPRINT DBGPRINT
-#define EEPROM_SIZE								0x200
-#ifdef CONFIG_STA_SUPPORT
-#define EEPROM_BIN_FILE_NAME  "/etc/Wireless/RT2860STA/e2p.bin"
-#endif // CONFIG_STA_SUPPORT //
-
-#else // !UCOS //
-#define fATE_LOAD_EEPROM						0x0C43
-#ifdef CONFIG_PRINTK
-extern INT ConsoleResponse(IN PUCHAR buff);
-extern int (*remote_display)(char *);
-extern void puts (const char *s);
-
-/* specificly defined to redirect and show ate-related messages to host. */
-/* Try to define ate_print as a macro. */
-#define ate_print(fmt, args...)                 \
-do{   int (*org_remote_display)(char *) = NULL;   \
-	org_remote_display = remote_display;\
-	/* Save original "remote_display" */\
-	remote_display = (int (*)(char *))ConsoleResponse;           \
-	printk(fmt, ## args);                       \
-	/* Restore the remote_display function pointer */        \
-	remote_display = org_remote_display; }while(0)
-
-#define ATEDBGPRINT(Level, Fmt)    	\
-{                                   \
-    if ((Level) <= RTDebugLevel)      \
-    {                               \
-        ate_print Fmt;					\
-    }                               \
-}
-#endif // CONFIG_PRINTK //
-#endif // !UCOS //
-
-#define ATE_ON(_p)              (((_p)->ate.Mode) != ATE_STOP)
-
-/* RT2880_iNIC will define "RT2860". */
-#define ATE_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV)        \
-{                                                       \
-    BBP_CSR_CFG_STRUC  BbpCsr;                             \
-    int             i, k;                               \
-    for (i=0; i<MAX_BUSY_COUNT; i++)                    \
-    {                                                   \
-        RTMP_IO_READ32(_A, BBP_CSR_CFG, &BbpCsr.word);     \
-        if (BbpCsr.field.Busy == BUSY)                  \
-        {                                               \
-            continue;                                   \
-        }                                               \
-        BbpCsr.word = 0;                                \
-        BbpCsr.field.fRead = 1;                         \
-        BbpCsr.field.BBP_RW_MODE = 1;                         \
-        BbpCsr.field.Busy = 1;                          \
-        BbpCsr.field.RegNum = _I;                       \
-        RTMP_IO_WRITE32(_A, BBP_CSR_CFG, BbpCsr.word);     \
-        for (k=0; k<MAX_BUSY_COUNT; k++)                \
-        {                                               \
-            RTMP_IO_READ32(_A, BBP_CSR_CFG, &BbpCsr.word); \
-            if (BbpCsr.field.Busy == IDLE)              \
-                break;                                  \
-        }                                               \
-        if ((BbpCsr.field.Busy == IDLE) &&              \
-            (BbpCsr.field.RegNum == _I))                \
-        {                                               \
-            *(_pV) = (UCHAR)BbpCsr.field.Value;         \
-            break;                                      \
-        }                                               \
-    }                                                   \
-    if (BbpCsr.field.Busy == BUSY)                      \
-    {                                                   \
-        ATEDBGPRINT(RT_DEBUG_ERROR, ("BBP read R%d fail\n", _I));      \
-        *(_pV) = (_A)->BbpWriteLatch[_I];               \
-    }                                                   \
-}
-
-#define ATE_BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V)        \
-{                                                       \
-    BBP_CSR_CFG_STRUC  BbpCsr;                             \
-    int             BusyCnt;                            \
-    for (BusyCnt=0; BusyCnt<MAX_BUSY_COUNT; BusyCnt++)  \
-    {                                                   \
-        RTMP_IO_READ32(_A, BBP_CSR_CFG, &BbpCsr.word);     \
-        if (BbpCsr.field.Busy == BUSY)                  \
-            continue;                                   \
-        BbpCsr.word = 0;                                \
-        BbpCsr.field.fRead = 0;                         \
-        BbpCsr.field.BBP_RW_MODE = 1;                         \
-        BbpCsr.field.Busy = 1;                          \
-        BbpCsr.field.Value = _V;                        \
-        BbpCsr.field.RegNum = _I;                       \
-        RTMP_IO_WRITE32(_A, BBP_CSR_CFG, BbpCsr.word);     \
-        (_A)->BbpWriteLatch[_I] = _V;                   \
-        break;                                          \
-    }                                                   \
-    if (BusyCnt == MAX_BUSY_COUNT)                      \
-    {                                                   \
-        ATEDBGPRINT(RT_DEBUG_ERROR, ("BBP write R%d fail\n", _I));     \
-    }                                                   \
-}
-
-/* RT2880_iNIC will define RT2860. */
-#define EEPROM_SIZE								0x200
-/* iNIC has its own EEPROM_BIN_FILE_NAME */
-#ifndef UCOS
-#ifdef CONFIG_STA_SUPPORT
-#define EEPROM_BIN_FILE_NAME  "/etc/Wireless/RT2860STA/e2p.bin"
-#endif // CONFIG_STA_SUPPORT //
-#endif // !UCOS //
-
-
-
-VOID rt_ee_read_all(
-	IN  PRTMP_ADAPTER   pAd,
-	OUT USHORT *Data);
-
-
-VOID rt_ee_write_all(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  USHORT *Data);
-
-INT Set_ATE_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_DA_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_SA_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_BSSID_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_CHANNEL_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_POWER0_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_POWER1_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_Antenna_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_RX_Antenna_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_FREQOFFSET_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_BW_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_LENGTH_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_COUNT_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_MCS_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_MODE_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_GI_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-
-INT	Set_ATE_RX_FER_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Read_RF_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Write_RF1_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Write_RF2_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Write_RF3_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Write_RF4_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Load_E2P_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Read_E2P_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_Show_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_Help_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-#ifdef RALINK_ATE
-#ifdef RALINK_28xx_QA
-VOID ATE_QA_Statistics(
-	IN PRTMP_ADAPTER		pAd,
-	IN PRXWI_STRUC			pRxWI,
-	IN PRT28XX_RXD_STRUC    p28xxRxD,
-	IN PHEADER_802_11		pHeader);
-
-VOID RtmpDoAte(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq);
-
-VOID BubbleSort(
-	IN  INT32 n,
-	IN  INT32 a[]);
-
-VOID CalNoiseLevel(
-	IN  PRTMP_ADAPTER   pAdapter,
-	IN  UCHAR           channel,
-	OUT INT32           buffer[3][10]);
-
-BOOLEAN SyncTxRxConfig(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	USHORT			offset,
-	IN	UCHAR			value);
-
-#if 0
-INT Set_TxStart_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-#endif  // 0 //
-
-INT Set_TxStop_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_RxStop_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-#if 0
-INT Set_EERead_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_EEWrite_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_BBPRead_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_BBPWrite_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_RFWrite_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-#endif // end of #if 0 //
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
-VOID ATEAsicSwitchChannel(
-	IN PRTMP_ADAPTER pAd);
-
-VOID ATEAsicAdjustTxPower(
-	IN PRTMP_ADAPTER pAd);
-
-VOID ATEDisableAsicProtect(
-	IN		PRTMP_ADAPTER	pAd);
-
-CHAR ATEConvertToRssi(
-	IN PRTMP_ADAPTER  pAd,
-	IN CHAR				Rssi,
-	IN UCHAR    RssiNumber);
-
-VOID ATESampleRssi(
-	IN PRTMP_ADAPTER	pAd,
-	IN PRXWI_STRUC		pRxWI);
-
-
-#ifdef CONFIG_STA_SUPPORT
-VOID RTMPStationStop(
-    IN  PRTMP_ADAPTER   pAd);
-
-VOID RTMPStationStart(
-    IN  PRTMP_ADAPTER   pAd);
-#endif // CONFIG_STA_SUPPORT //
-#endif // __ATE_H__ //
diff --git a/drivers/staging/rt2860/rt_config.h b/drivers/staging/rt2860/rt_config.h
index a67024fb437..a19cbe1dede 100644
--- a/drivers/staging/rt2860/rt_config.h
+++ b/drivers/staging/rt2860/rt_config.h
@@ -41,20 +41,18 @@
 #define	__RT_CONFIG_H__
 
 #include    "rtmp_type.h"
-#ifdef UCOS
-#include "includes.h"
-#include <stdio.h>
-#include 	"rt_ucos.h"
-#endif
-
 #ifdef LINUX
 #include	"rt_linux.h"
 #endif
 #include    "rtmp_def.h"
 #include    "rt28xx.h"
 
+#ifdef RT2860
 #include	"rt2860.h"
-
+#endif
+#ifdef RT2870
+#include	"../rt2870/rt2870.h"
+#endif // RT2870 //
 
 #include    "oid.h"
 #include    "mlme.h"
@@ -66,31 +64,10 @@
 #include	"chlist.h"
 #include	"spectrum.h"
 
-#ifdef LEAP_SUPPORT
-#include    "leap.h"
-#endif // LEAP_SUPPORT //
-
-#ifdef BLOCK_NET_IF
-#include "netif_block.h"
-#endif // BLOCK_NET_IF //
-
 #ifdef IGMP_SNOOP_SUPPORT
 #include "igmp_snoop.h"
 #endif // IGMP_SNOOP_SUPPORT //
 
-#ifdef RALINK_ATE
-#include "rt_ate.h"
-#endif // RALINK_ATE //
-
-#ifdef CONFIG_STA_SUPPORT
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-#ifndef WPA_SUPPLICANT_SUPPORT
-#error "Build for being controlled by NetworkManager or wext, please set HAS_WPA_SUPPLICANT=y and HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y"
-#endif // WPA_SUPPLICANT_SUPPORT //
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-
-#endif // CONFIG_STA_SUPPORT //
-
 #ifdef IKANOS_VX_1X0
 #include	"vr_ikans.h"
 #endif // IKANOS_VX_1X0 //
diff --git a/drivers/staging/rt2860/rt_linux.c b/drivers/staging/rt2860/rt_linux.c
index f3c128c72a2..80176b20db0 100644
--- a/drivers/staging/rt2860/rt_linux.c
+++ b/drivers/staging/rt2860/rt_linux.c
@@ -33,9 +33,10 @@ BUILD_TIMER_FUNCTION(MlmePeriodicExec);
 BUILD_TIMER_FUNCTION(AsicRxAntEvalTimeout);
 BUILD_TIMER_FUNCTION(APSDPeriodicExec);
 BUILD_TIMER_FUNCTION(AsicRfTuningExec);
+#ifdef RT2870
+BUILD_TIMER_FUNCTION(BeaconUpdateExec);
+#endif // RT2870 //
 
-
-#ifdef CONFIG_STA_SUPPORT
 BUILD_TIMER_FUNCTION(BeaconTimeout);
 BUILD_TIMER_FUNCTION(ScanTimeout);
 BUILD_TIMER_FUNCTION(AuthTimeout);
@@ -43,17 +44,12 @@ BUILD_TIMER_FUNCTION(AssocTimeout);
 BUILD_TIMER_FUNCTION(ReassocTimeout);
 BUILD_TIMER_FUNCTION(DisassocTimeout);
 BUILD_TIMER_FUNCTION(LinkDownExec);
-#ifdef LEAP_SUPPORT
-BUILD_TIMER_FUNCTION(LeapAuthTimeout);
-#endif
 BUILD_TIMER_FUNCTION(StaQuickResponeForRateUpExec);
 BUILD_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc);
+#ifdef RT2860
 BUILD_TIMER_FUNCTION(PsPollWakeExec);
 BUILD_TIMER_FUNCTION(RadioOnExec);
-#ifdef QOS_DLS_SUPPORT
-BUILD_TIMER_FUNCTION(DlsTimeoutAction);
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
+#endif
 
 // for wireless system event message
 char const *pWirelessSysEventText[IW_SYS_EVENT_TYPE_NUM] = {
@@ -290,9 +286,9 @@ VOID	RTMPFreeAdapter(
 
 
 	NdisFreeSpinLock(&pAd->MgmtRingLock);
-
+#ifdef RT2860
 	NdisFreeSpinLock(&pAd->RxRingLock);
-
+#endif
 	for (index =0 ; index < NUM_OF_TX_RING; index++)
 	{
     	NdisFreeSpinLock(&pAd->TxSwQueueLock[index]);
@@ -495,12 +491,7 @@ PNET_DEV get_netdev_from_bssid(
 {
     PNET_DEV dev_p = NULL;
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		dev_p = pAd->net_dev;
-	}
-#endif // CONFIG_STA_SUPPORT //
+	dev_p = pAd->net_dev;
 
 	ASSERT(dev_p);
 	return dev_p; /* return one of MBSS */
@@ -656,13 +647,8 @@ void wlan_802_11_to_802_3_packet(
 	//
 	//
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		NdisMoveMemory(skb_push(pOSPkt, LENGTH_802_3), pHeader802_3, LENGTH_802_3);
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-
+	NdisMoveMemory(skb_push(pOSPkt, LENGTH_802_3), pHeader802_3, LENGTH_802_3);
+}
 
 void announce_802_3_packet(
 	IN	PRTMP_ADAPTER	pAd,
@@ -824,8 +810,6 @@ VOID RTMPSendWirelessEvent(
 #endif  /* WIRELESS_EXT >= 15 */
 }
 
-
-#ifdef CONFIG_STA_SUPPORT
 void send_monitor_packets(
 	IN	PRTMP_ADAPTER	pAd,
 	IN	RX_BLK			*pRxBlk)
@@ -850,7 +834,12 @@ void send_monitor_packets(
 
     if (pRxBlk->DataSize + sizeof(wlan_ng_prism2_header) > RX_BUFFER_AGGRESIZE)
     {
+#ifndef RT30xx
         DBGPRINT(RT_DEBUG_ERROR, ("%s : Size is too large! (%zu)\n", __func__, pRxBlk->DataSize + sizeof(wlan_ng_prism2_header)));
+#endif
+#ifdef RT30xx
+        DBGPRINT(RT_DEBUG_ERROR, ("%s : Size is too large! (%d)\n", __func__, pRxBlk->DataSize + sizeof(wlan_ng_prism2_header)));
+#endif
 		goto err_free_sk_buff;
     }
 
@@ -957,13 +946,11 @@ void send_monitor_packets(
 	ph->noise.len = 4;
 	ph->noise.data = 0;
 
-#ifdef DOT11_N_SUPPORT
     if (pRxBlk->pRxWI->PHYMODE >= MODE_HTMIX)
     {
     	rate_index = 16 + ((UCHAR)pRxBlk->pRxWI->BW *16) + ((UCHAR)pRxBlk->pRxWI->ShortGI *32) + ((UCHAR)pRxBlk->pRxWI->MCS);
     }
     else
-#endif // DOT11_N_SUPPORT //
 	if (pRxBlk->pRxWI->PHYMODE == MODE_OFDM)
     	rate_index = (UCHAR)(pRxBlk->pRxWI->MCS) + 4;
     else
@@ -996,8 +983,6 @@ err_free_sk_buff:
 	return;
 
 }
-#endif // CONFIG_STA_SUPPORT //
-
 
 void rtmp_os_thread_init(PUCHAR pThreadName, PVOID pNotify)
 {
diff --git a/drivers/staging/rt2860/rt_linux.h b/drivers/staging/rt2860/rt_linux.h
index 708923cecaa..85175c18243 100644
--- a/drivers/staging/rt2860/rt_linux.h
+++ b/drivers/staging/rt2860/rt_linux.h
@@ -42,8 +42,10 @@
 
 #include "rtmp_type.h"
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
+#if !defined(RT2860) && !defined(RT30xx)
+#include <linux/kthread.h>
+#endif
 
 #include <linux/spinlock.h>
 #include <linux/init.h>
@@ -65,6 +67,9 @@
 #include <linux/vmalloc.h>
 
 
+#ifdef RT30xx
+#include <linux/wireless.h>
+#endif
 #include <net/iw_handler.h>
 
 // load firmware
@@ -88,23 +93,31 @@ typedef int (*HARD_START_XMIT_FUNC)(struct sk_buff *skb, struct net_device *net_
 
 // add by kathy
 
-#ifdef CONFIG_STA_SUPPORT
+#ifdef RT2860
 #define STA_PROFILE_PATH			"/etc/Wireless/RT2860STA/RT2860STA.dat"
 #define STA_RTMP_FIRMWARE_FILE_NAME "/etc/Wireless/RT2860STA/RT2860STA.bin"
 #define STA_NIC_DEVICE_NAME			"RT2860STA"
 #define STA_DRIVER_VERSION			"1.8.1.1"
-#ifdef MULTIPLE_CARD_SUPPORT
-#define CARD_INFO_PATH			"/etc/Wireless/RT2860STA/RT2860STACard.dat"
-#endif // MULTIPLE_CARD_SUPPORT //
-
-
-#endif // CONFIG_STA_SUPPORT //
+#endif
+#ifdef RT2870
+#define STA_PROFILE_PATH			"/etc/Wireless/RT2870STA/RT2870STA.dat"
+#define STA_RT2870_IMAGE_FILE_NAME  "/etc/Wireless/RT2870STA/rt2870.bin"
+#define STA_NIC_DEVICE_NAME			"RT2870STA"
+#ifndef RT30xx
+#define STA_DRIVER_VERSION			"1.4.0.0"
+#endif
+#ifdef RT30xx
+#define STA_DRIVER_VERSION			"2.0.1.0"
+#endif
+#endif
 
+#ifdef RT2860
 #ifndef PCI_DEVICE
 #define PCI_DEVICE(vend,dev) \
 	.vendor = (vend), .device = (dev), \
 	.subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID
 #endif // PCI_DEVICE //
+#endif
 
 #define RTMP_TIME_AFTER(a,b)		\
 	(typecheck(unsigned long, (unsigned long)a) && \
@@ -144,24 +157,23 @@ typedef int (*HARD_START_XMIT_FUNC)(struct sk_buff *skb, struct net_device *net_
 #define MIN_NET_DEVICE_FOR_WDS			0x10		//0x40,0x50,0x60,0x70
 #define MIN_NET_DEVICE_FOR_APCLI		0x20
 #define MIN_NET_DEVICE_FOR_MESH			0x30
-#ifdef CONFIG_STA_SUPPORT
 #define MIN_NET_DEVICE_FOR_DLS			0x40
-#endif // CONFIG_STA_SUPPORT //
-
 
-#ifdef CONFIG_STA_SUPPORT
 #define NDIS_PACKET_TYPE_DIRECTED		0
 #define NDIS_PACKET_TYPE_MULTICAST		1
 #define NDIS_PACKET_TYPE_BROADCAST		2
 #define NDIS_PACKET_TYPE_ALL_MULTICAST	3
-#endif // CONFIG_STA_SUPPORT //
 
+#ifndef RT30xx
 typedef	struct pid *	THREAD_PID;
+#ifdef RT2860
 #define	THREAD_PID_INIT_VALUE	NULL
+#endif
 #define	GET_PID(_v)	find_get_pid(_v)
 #define	GET_PID_NUMBER(_v)	pid_nr(_v)
 #define CHECK_PID_LEGALITY(_pid)	if (pid_nr(_pid) >= 0)
 #define KILL_THREAD_PID(_A, _B, _C)	kill_pid(_A, _B, _C)
+#endif
 
 struct os_lock  {
 	spinlock_t		lock;
@@ -170,10 +182,25 @@ struct os_lock  {
 
 
 struct os_cookie {
+#ifdef RT2860
 	struct pci_dev 			*pci_dev;
 	struct pci_dev 			*parent_pci_dev;
 	dma_addr_t		  		pAd_pa;
+#endif
+#ifdef RT2870
+	struct usb_device	*pUsb_Dev;
 
+#ifndef RT30xx
+	struct task_struct	*MLMEThr_task;
+	struct task_struct	*RTUSBCmdThr_task;
+	struct task_struct	*TimerQThr_task;
+#endif
+#ifdef RT30xx
+	struct pid	*MLMEThr_pid;
+	struct pid	*RTUSBCmdThr_pid;
+	struct pid	*TimerQThr_pid;
+#endif
+#endif // RT2870 //
 
 	struct tasklet_struct 	rx_done_task;
 	struct tasklet_struct 	mgmt_dma_done_task;
@@ -183,8 +210,14 @@ struct os_cookie {
 	struct tasklet_struct 	ac3_dma_done_task;
 	struct tasklet_struct 	hcca_dma_done_task;
 	struct tasklet_struct	tbtt_task;
+#ifdef RT2860
 	struct tasklet_struct	fifo_statistic_full_task;
-
+#endif
+#ifdef RT2870
+	struct tasklet_struct	null_frame_complete_task;
+	struct tasklet_struct	rts_frame_complete_task;
+	struct tasklet_struct	pspoll_frame_complete_task;
+#endif // RT2870 //
 
 	unsigned long			apd_pid; //802.1x daemon pid
 	INT						ioctl_if_type;
@@ -198,13 +231,7 @@ typedef struct _VIRTUAL_ADAPTER
 } VIRTUAL_ADAPTER, PVIRTUAL_ADAPTER;
 
 #undef  ASSERT
-#define ASSERT(x)                                                               \
-{                                                                               \
-    if (!(x))                                                                   \
-    {                                                                           \
-        printk(KERN_WARNING __FILE__ ":%d assert " #x "failed\n", __LINE__);    \
-    }                                                                           \
-}
+#define ASSERT(x)
 
 typedef struct os_cookie	* POS_COOKIE;
 typedef struct pci_dev 		* PPCI_DEV;
@@ -238,6 +265,7 @@ void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size, int
 
 #define RT2860_PCI_DEVICE_ID		0x0601
 
+#ifdef RT2860
 #define PCI_MAP_SINGLE(_handle, _ptr, _size, _sd_idx, _dir) \
 	linux_pci_map_single(_handle, _ptr, _size, _sd_idx, _dir)
 
@@ -252,7 +280,12 @@ void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size, int
 
 #define DEV_ALLOC_SKB(_length) \
 	dev_alloc_skb(_length)
+#endif
+#ifdef RT2870
+#define PCI_MAP_SINGLE(_handle, _ptr, _size, _dir) (ULONG)0
 
+#define PCI_UNMAP_SINGLE(_handle, _ptr, _size, _dir)
+#endif // RT2870 //
 
 
 #define BEACON_FRAME_DMA_CACHE_WBACK(_ptr, _size)	\
@@ -266,9 +299,20 @@ void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size, int
 
 #define NdisMIndicateStatus(_w, _x, _y, _z)
 
-
 typedef struct timer_list	RTMP_OS_TIMER;
 
+#ifdef RT2870
+/* ----------------- Timer Related MARCO ---------------*/
+// In RT2870, we have a lot of timer functions and will read/write register, it's
+//	not allowed in Linux USB sub-system to do it ( because of sleep issue when submit
+//  to ctrl pipe). So we need a wrapper function to take care it.
+
+typedef VOID (*RT2870_TIMER_HANDLE)(
+	IN  PVOID   SystemSpecific1,
+	IN  PVOID   FunctionContext,
+	IN  PVOID   SystemSpecific2,
+	IN  PVOID   SystemSpecific3);
+#endif // RT2870 //
 
 
 typedef struct  _RALINK_TIMER_STRUCT    {
@@ -279,9 +323,42 @@ typedef struct  _RALINK_TIMER_STRUCT    {
     BOOLEAN             Repeat;         // True if periodic timer
     ULONG               TimerValue;     // Timer value in milliseconds
 	ULONG				cookie;			// os specific object
+#ifdef RT2870
+	RT2870_TIMER_HANDLE	handle;
+	void				*pAd;
+#endif // RT2870 //
 }   RALINK_TIMER_STRUCT, *PRALINK_TIMER_STRUCT;
 
 
+#ifdef RT2870
+
+typedef enum _RT2870_KERNEL_THREAD_STATUS_
+{
+	RT2870_THREAD_UNKNOWN = 0,
+	RT2870_THREAD_INITED = 1,
+	RT2870_THREAD_RUNNING = 2,
+	RT2870_THREAD_STOPED = 4,
+}RT2870_KERNEL_THREAD_STATUS;
+
+#define RT2870_THREAD_CAN_DO_INSERT		(RT2870_THREAD_INITED |RT2870_THREAD_RUNNING)
+
+typedef struct _RT2870_TIMER_ENTRY_
+{
+	RALINK_TIMER_STRUCT 			*pRaTimer;
+	struct _RT2870_TIMER_ENTRY_ 	*pNext;
+}RT2870_TIMER_ENTRY;
+
+
+#define TIMER_QUEUE_SIZE_MAX	128
+typedef struct _RT2870_TIMER_QUEUE_
+{
+	unsigned int		status;
+	UCHAR				*pTimerQPoll;
+	RT2870_TIMER_ENTRY	*pQPollFreeList;
+	RT2870_TIMER_ENTRY 	*pQHead;
+	RT2870_TIMER_ENTRY 	*pQTail;
+}RT2870_TIMER_QUEUE;
+#endif // RT2870 //
 
 
 //#define DBG	1
@@ -371,6 +448,7 @@ extern ULONG    RTDebugLevel;
 	spin_unlock_irqrestore((spinlock_t *)(__lock), ((unsigned long)__irqflag));	\
 }
 
+#ifdef RT2860
 #if defined(INF_TWINPASS) || defined(INF_DANUBE) || defined(IKANOS_VX_1X0)
 //Patch for ASIC turst read/write bug, needs to remove after metel fix
 #define RTMP_IO_READ32(_A, _R, _pV)									\
@@ -472,7 +550,32 @@ extern ULONG    RTDebugLevel;
 	writew((_V), (PUSHORT)((_A)->CSRBaseAddress + (_R)));	\
 }
 #endif
+#endif /* RT2860 */
+#ifdef RT2870
+//Patch for ASIC turst read/write bug, needs to remove after metel fix
+#define RTMP_IO_READ32(_A, _R, _pV)								\
+	RTUSBReadMACRegister(_A, _R, _pV)
+
+#define RTMP_IO_READ8(_A, _R, _pV)								\
+{																\
+}
+
+#define RTMP_IO_WRITE32(_A, _R, _V)								\
+	RTUSBWriteMACRegister(_A, _R, _V)
+
+
+#define RTMP_IO_WRITE8(_A, _R, _V)								\
+{																\
+	USHORT	_Val = _V;											\
+	RTUSBSingleWrite(_A, _R, _Val);								\
+}
+
 
+#define RTMP_IO_WRITE16(_A, _R, _V)								\
+{																\
+	RTUSBSingleWrite(_A, _R, _V);								\
+}
+#endif // RT2870 //
 
 #ifndef wait_event_interruptible_timeout
 #define __wait_event_interruptible_timeout(wq, condition, ret) \
@@ -515,7 +618,6 @@ do { \
 		wait_event_interruptible_timeout(_wait, 0, ONE_TICK); }
 
 
-/* Modified by Wu Xi-Kun 4/21/2006 */
 typedef void (*TIMER_FUNCTION)(unsigned long);
 
 #define COPY_MAC_ADDR(Addr1, Addr2)             memcpy((Addr1), (Addr2), MAC_ADDR_LEN)
@@ -523,6 +625,7 @@ typedef void (*TIMER_FUNCTION)(unsigned long);
 #define MlmeAllocateMemory(_pAd, _ppVA) os_alloc_mem(_pAd, _ppVA, MGMT_DMA_BUFFER_SIZE)
 #define MlmeFreeMemory(_pAd, _pVA)     os_free_mem(_pAd, _pVA)
 
+#ifdef RT2860
 #define BUILD_TIMER_FUNCTION(_func)												\
 void linux_##_func(unsigned long data)											\
 {																				\
@@ -532,7 +635,22 @@ void linux_##_func(unsigned long data)											\
 	if (pTimer->Repeat)															\
 		RTMP_OS_Add_Timer(&pTimer->TimerObj, pTimer->TimerValue);				\
 }
-
+#endif
+#ifdef RT2870
+#define BUILD_TIMER_FUNCTION(_func)													\
+void linux_##_func(unsigned long data)												\
+{																					\
+	PRALINK_TIMER_STRUCT	_pTimer = (PRALINK_TIMER_STRUCT)data;					\
+	RT2870_TIMER_ENTRY		*_pQNode;												\
+	RTMP_ADAPTER			*_pAd;													\
+																				\
+	_pTimer->handle = _func;															\
+	_pAd = (RTMP_ADAPTER *)_pTimer->pAd;												\
+	_pQNode = RT2870_TimerQ_Insert(_pAd, _pTimer); 									\
+	if ((_pQNode == NULL) && (_pAd->TimerQ.status & RT2870_THREAD_CAN_DO_INSERT))	\
+		RTMP_OS_Add_Timer(&_pTimer->TimerObj, HZ);               					\
+}
+#endif // RT2870 //
 
 
 #define DECLARE_TIMER_FUNCTION(_func)			\
@@ -546,9 +664,10 @@ DECLARE_TIMER_FUNCTION(MlmeRssiReportExec);
 DECLARE_TIMER_FUNCTION(AsicRxAntEvalTimeout);
 DECLARE_TIMER_FUNCTION(APSDPeriodicExec);
 DECLARE_TIMER_FUNCTION(AsicRfTuningExec);
+#ifdef RT2870
+DECLARE_TIMER_FUNCTION(BeaconUpdateExec);
+#endif // RT2870 //
 
-
-#ifdef CONFIG_STA_SUPPORT
 DECLARE_TIMER_FUNCTION(BeaconTimeout);
 DECLARE_TIMER_FUNCTION(ScanTimeout);
 DECLARE_TIMER_FUNCTION(AuthTimeout);
@@ -556,19 +675,11 @@ DECLARE_TIMER_FUNCTION(AssocTimeout);
 DECLARE_TIMER_FUNCTION(ReassocTimeout);
 DECLARE_TIMER_FUNCTION(DisassocTimeout);
 DECLARE_TIMER_FUNCTION(LinkDownExec);
-#ifdef LEAP_SUPPORT
-DECLARE_TIMER_FUNCTION(LeapAuthTimeout);
-#endif
 DECLARE_TIMER_FUNCTION(StaQuickResponeForRateUpExec);
 DECLARE_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc);
 DECLARE_TIMER_FUNCTION(PsPollWakeExec);
 DECLARE_TIMER_FUNCTION(RadioOnExec);
 
-#ifdef QOS_DLS_SUPPORT
-DECLARE_TIMER_FUNCTION(DlsTimeoutAction);
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
 void RTMP_GetCurrentSystemTime(LARGE_INTEGER *time);
 
 
@@ -676,10 +787,6 @@ void RTMP_GetCurrentSystemTime(LARGE_INTEGER *time);
 #define RTMP_GET_PACKET_MOREDATA(_p)				(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+7])
 
 
-#if 0
-//#define RTMP_SET_PACKET_DHCP(_p, _flg)   	(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] = _flg)
-//#define RTMP_GET_PACKET_DHCP(_p)         	(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11])
-#else
 //
 //	Sepcific Pakcet Type definition
 //
@@ -759,8 +866,6 @@ void RTMP_GetCurrentSystemTime(LARGE_INTEGER *time);
 
 #define RTMP_GET_PACKET_IPV4(_p)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_IPV4)
 
-#endif
-
 
 // If this flag is set, it indicates that this EAPoL frame MUST be clear.
 #define RTMP_SET_PACKET_CLEAR_EAP_FRAME(_p, _flg)   (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+12] = _flg)
@@ -884,6 +989,7 @@ int rt28xx_packet_xmit(struct sk_buff *skb);
 
 void rtmp_os_thread_init(PUCHAR pThreadName, PVOID pNotify);
 
+#ifdef RT2860
 #if !defined(PCI_CAP_ID_EXP)
 #define PCI_CAP_ID_EXP			    0x10
 #endif
@@ -897,5 +1003,5 @@ void rtmp_os_thread_init(PUCHAR pThreadName, PVOID pNotify);
 #endif
 
 #define PCIBUS_INTEL_VENDOR         0x8086
-
+#endif
 
diff --git a/drivers/staging/rt2860/rt_main_dev.c b/drivers/staging/rt2860/rt_main_dev.c
index 6c4396f0903..f298b9bcec3 100644
--- a/drivers/staging/rt2860/rt_main_dev.c
+++ b/drivers/staging/rt2860/rt_main_dev.c
@@ -40,17 +40,6 @@
 
 #define FORTY_MHZ_INTOLERANT_INTERVAL	(60*1000) // 1 min
 
-#ifdef MULTIPLE_CARD_SUPPORT
-// record whether the card in the card list is used in the card file
-UINT8  MC_CardUsed[MAX_NUM_OF_MULTIPLE_CARD];
-// record used card mac address in the card list
-static UINT8  MC_CardMac[MAX_NUM_OF_MULTIPLE_CARD][6];
-#endif // MULTIPLE_CARD_SUPPORT //
-
-#ifdef CONFIG_APSTA_MIXED_SUPPORT
-UINT32 CW_MAX_IN_BITS;
-#endif // CONFIG_APSTA_MIXED_SUPPORT //
-
 /*---------------------------------------------------------------------*/
 /* Private Variables Used                                              */
 /*---------------------------------------------------------------------*/
@@ -65,13 +54,13 @@ MODULE_PARM_DESC (mac, "rt28xx: wireless mac addr");
 /*---------------------------------------------------------------------*/
 /* Prototypes of Functions Used                                        */
 /*---------------------------------------------------------------------*/
-#ifdef DOT11_N_SUPPORT
 extern BOOLEAN ba_reordering_resource_init(PRTMP_ADAPTER pAd, int num);
 extern void ba_reordering_resource_release(PRTMP_ADAPTER pAd);
-#endif // DOT11_N_SUPPORT //
 extern NDIS_STATUS NICLoadRateSwitchingParams(IN PRTMP_ADAPTER pAd);
 
+#ifdef RT2860
 extern void init_thread_task(PRTMP_ADAPTER pAd);
+#endif
 
 // public function prototype
 INT __devinit rt28xx_probe(IN void *_dev_p, IN void *_dev_id_p,
@@ -83,13 +72,7 @@ INT rt28xx_send_packets(IN struct sk_buff *skb_p, IN struct net_device *net_dev)
 
 static void CfgInitHook(PRTMP_ADAPTER pAd);
 
-#ifdef CONFIG_STA_SUPPORT
 extern	const struct iw_handler_def rt28xx_iw_handler_def;
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef CONFIG_APSTA_MIXED_SUPPORT
-extern	const struct iw_handler_def rt28xx_ap_iw_handler_def;
-#endif // CONFIG_APSTA_MIXED_SUPPORT //
 
 #if WIRELESS_EXT >= 12
 // This function will be called when query /proc
@@ -206,6 +189,12 @@ int rt28xx_close(IN PNET_DEV dev)
     RTMP_ADAPTER	*pAd = net_dev->ml_priv;
 	BOOLEAN 		Cancelled = FALSE;
 	UINT32			i = 0;
+#ifdef RT2870
+	DECLARE_WAIT_QUEUE_HEAD(unlink_wakeup);
+	DECLARE_WAITQUEUE(wait, current);
+
+	//RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
+#endif // RT2870 //
 
 
     DBGPRINT(RT_DEBUG_TRACE, ("===> rt28xx_close\n"));
@@ -214,54 +203,26 @@ int rt28xx_close(IN PNET_DEV dev)
 	if (pAd == NULL)
 		return 0; // close ok
 
-
-#ifdef WDS_SUPPORT
-	WdsDown(pAd);
-#endif // WDS_SUPPORT //
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// If dirver doesn't wake up firmware here,
 		// NICLoadFirmware will hang forever when interface is up again.
+#ifdef RT2860
 		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) ||
 			RTMP_SET_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND) ||
 			RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF))
+#endif
+#ifdef RT2870
+		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
+#endif
         {
+#ifdef RT2860
 		    AsicForceWakeup(pAd, RTMP_HALT);
+#endif
+#ifdef RT2870
+		    AsicForceWakeup(pAd, TRUE);
+#endif
         }
 
-#ifdef QOS_DLS_SUPPORT
-		// send DLS-TEAR_DOWN message,
-		if (pAd->CommonCfg.bDLSCapable)
-		{
-			UCHAR i;
-
-			// tear down local dls table entry
-			for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-			{
-				if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
-				{
-					RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
-					pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-					pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-				}
-			}
-
-			// tear down peer dls table entry
-			for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
-			{
-				if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
-				{
-					RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
-					pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
-					pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-				}
-			}
-			RT28XX_MLME_HANDLER(pAd);
-		}
-#endif // QOS_DLS_SUPPORT //
-
 		if (INFRA_ON(pAd) &&
 			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
 		{
@@ -287,6 +248,9 @@ int rt28xx_close(IN PNET_DEV dev)
 			RTMPusecDelay(1000);
 		}
 
+#ifdef RT2870
+	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
+#endif // RT2870 //
 
 #ifdef CCX_SUPPORT
 		RTMPCancelTimer(&pAd->StaCfg.LeapAuthTimer, &Cancelled);
@@ -295,22 +259,11 @@ int rt28xx_close(IN PNET_DEV dev)
 		RTMPCancelTimer(&pAd->StaCfg.StaQuickResponeForRateUpTimer, &Cancelled);
 		RTMPCancelTimer(&pAd->StaCfg.WpaDisassocAndBlockAssocTimer, &Cancelled);
 
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-		{
-			union iwreq_data    wrqu;
-			// send wireless event to wpa_supplicant for infroming interface down.
-			memset(&wrqu, 0, sizeof(wrqu));
-			wrqu.data.flags = RT_INTERFACE_DOWN;
-			wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL);
-		}
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
 		MlmeRadioOff(pAd);
+#ifdef RT2860
 		pAd->bPCIclkOff = FALSE;
+#endif
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
 
@@ -323,25 +276,52 @@ int rt28xx_close(IN PNET_DEV dev)
 		}
 	}
 
+#ifdef RT2870
+	// ensure there are no more active urbs.
+	add_wait_queue (&unlink_wakeup, &wait);
+	pAd->wait = &unlink_wakeup;
+
+	// maybe wait for deletions to finish.
+	i = 0;
+	//while((i < 25) && atomic_read(&pAd->PendingRx) > 0)
+	while(i < 25)
+	{
+		unsigned long IrqFlags;
+
+		RTMP_IRQ_LOCK(&pAd->BulkInLock, IrqFlags);
+		if (pAd->PendingRx == 0)
+		{
+			RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
+			break;
+		}
+		RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
+
+		msleep(UNLINK_TIMEOUT_MS);	//Time in millisecond
+		i++;
+	}
+	pAd->wait = NULL;
+	remove_wait_queue (&unlink_wakeup, &wait);
+#endif // RT2870 //
+
+#ifdef RT2870
+	// We need clear timerQ related structure before exits of the timer thread.
+	RT2870_TimerQ_Exit(pAd);
+	// Close kernel threads or tasklets
+	RT28xxThreadTerminate(pAd);
+#endif // RT2870 //
+
 	// Stop Mlme state machine
 	MlmeHalt(pAd);
 
 	// Close kernel threads or tasklets
 	kill_thread_task(pAd);
 
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		MacTableReset(pAd);
-	}
-#endif // CONFIG_STA_SUPPORT //
-
+	MacTableReset(pAd);
 
 	MeasureReqTabExit(pAd);
 	TpcReqTabExit(pAd);
 
-
+#ifdef RT2860
 	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE))
 	{
 		NICDisableInterrupt(pAd);
@@ -357,18 +337,15 @@ int rt28xx_close(IN PNET_DEV dev)
 		RT28XX_IRQ_RELEASE(net_dev)
 		RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
 	}
-
+#endif
 
 	// Free Ring or USB buffers
 	RTMPFreeTxRxRingMemory(pAd);
 
 	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
 
-#ifdef DOT11_N_SUPPORT
 	// Free BA reorder resource
 	ba_reordering_resource_release(pAd);
-#endif // DOT11_N_SUPPORT //
-
 
 	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_START_UP);
 
@@ -377,17 +354,19 @@ int rt28xx_close(IN PNET_DEV dev)
 
 static int rt28xx_init(IN struct net_device *net_dev)
 {
+#ifdef RT2860
 	PRTMP_ADAPTER 			pAd = (PRTMP_ADAPTER)net_dev->ml_priv;
+#endif
+#ifdef RT2870
+	PRTMP_ADAPTER 			pAd = net_dev->ml_priv;
+#endif
 	UINT					index;
 	UCHAR					TmpPhy;
 	NDIS_STATUS				Status;
 	UINT32 		MacCsr0 = 0;
 
-
-#ifdef DOT11_N_SUPPORT
 	// Allocate BA Reordering memory
 	ba_reordering_resource_init(pAd, MAX_REORDERING_MPDU_NUM);
-#endif // DOT11_N_SUPPORT //
 
 	// Make sure MAC gets ready.
 	index = 0;
@@ -403,11 +382,11 @@ static int rt28xx_init(IN struct net_device *net_dev)
 	} while (index++ < 100);
 
 	DBGPRINT(RT_DEBUG_TRACE, ("MAC_CSR0  [ Ver:Rev=0x%08x]\n", pAd->MACVersion));
+/*Iverson patch PCIE L1 issue */
 
 	// Disable DMA
 	RT28XXDMADisable(pAd);
 
-
 	// Load 8051 firmware
 	Status = NICLoadFirmware(pAd);
 	if (Status != NDIS_STATUS_SUCCESS)
@@ -420,10 +399,12 @@ static int rt28xx_init(IN struct net_device *net_dev)
 
 	// Disable interrupts here which is as soon as possible
 	// This statement should never be true. We might consider to remove it later
+#ifdef RT2860
 	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE))
 	{
 		NICDisableInterrupt(pAd);
 	}
+#endif
 
 	Status = RTMPAllocTxRxRingMemory(pAd);
 	if (Status != NDIS_STATUS_SUCCESS)
@@ -448,6 +429,10 @@ static int rt28xx_init(IN struct net_device *net_dev)
 	//
 	UserCfgInit(pAd);
 
+#ifdef RT2870
+	// We need init timerQ related structure before create the timer thread.
+	RT2870_TimerQ_Init(pAd);
+#endif // RT2870 //
 
 	RT28XX_TASK_THREAD_INIT(pAd, Status);
 	if (Status != NDIS_STATUS_SUCCESS)
@@ -455,15 +440,7 @@ static int rt28xx_init(IN struct net_device *net_dev)
 
 	CfgInitHook(pAd);
 
-
-#ifdef BLOCK_NET_IF
-	initblockQueueTab(pAd);
-#endif // BLOCK_NET_IF //
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		NdisAllocateSpinLock(&pAd->MacTabLock);
-#endif // CONFIG_STA_SUPPORT //
+	NdisAllocateSpinLock(&pAd->MacTabLock);
 
 	MeasureReqTabInit(pAd);
 	TpcReqTabInit(pAd);
@@ -489,10 +466,17 @@ static int rt28xx_init(IN struct net_device *net_dev)
 		goto err4;
 	}
 
+#ifdef RT2870
+	pAd->CommonCfg.bMultipleIRP = FALSE;
+
+	if (pAd->CommonCfg.bMultipleIRP)
+		pAd->CommonCfg.NumOfBulkInIRP = RX_RING_SIZE;
+	else
+		pAd->CommonCfg.NumOfBulkInIRP = 1;
+#endif // RT2870 //
 
 
    	//Init Ba Capability parameters.
-#ifdef DOT11_N_SUPPORT
 	pAd->CommonCfg.DesiredHtPhy.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
 	pAd->CommonCfg.DesiredHtPhy.AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable;
 	pAd->CommonCfg.DesiredHtPhy.AmsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
@@ -501,7 +485,6 @@ static int rt28xx_init(IN struct net_device *net_dev)
 	pAd->CommonCfg.HtCapability.HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
 	pAd->CommonCfg.HtCapability.HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
 	pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
-#endif // DOT11_N_SUPPORT //
 
 	printk("2. Phy Mode = %d\n", pAd->CommonCfg.PhyMode);
 
@@ -516,9 +499,7 @@ static int rt28xx_init(IN struct net_device *net_dev)
 	TmpPhy = pAd->CommonCfg.PhyMode;
 	pAd->CommonCfg.PhyMode = 0xff;
 	RTMPSetPhyMode(pAd, TmpPhy);
-#ifdef DOT11_N_SUPPORT
 	SetCommonHT(pAd);
-#endif // DOT11_N_SUPPORT //
 
 	// No valid channels.
 	if (pAd->ChannelListNum == 0)
@@ -527,11 +508,14 @@ static int rt28xx_init(IN struct net_device *net_dev)
 		goto err4;
 	}
 
-#ifdef DOT11_N_SUPPORT
 	printk("MCS Set = %02x %02x %02x %02x %02x\n", pAd->CommonCfg.HtCapability.MCSSet[0],
            pAd->CommonCfg.HtCapability.MCSSet[1], pAd->CommonCfg.HtCapability.MCSSet[2],
            pAd->CommonCfg.HtCapability.MCSSet[3], pAd->CommonCfg.HtCapability.MCSSet[4]);
-#endif // DOT11_N_SUPPORT //
+
+#ifdef RT2870
+    //Init RT30xx RFRegisters after read RFIC type from EEPROM
+	NICInitRT30xxRFRegisters(pAd);
+#endif // RT2870 //
 
 #ifdef IKANOS_VX_1X0
 	VR_IKANOS_FP_Init(pAd->ApCfg.BssidNum, pAd->PermanentAddress);
@@ -543,8 +527,10 @@ static int rt28xx_init(IN struct net_device *net_dev)
 	AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
 	AsicLockChannel(pAd, pAd->CommonCfg.Channel);
 
+#ifndef RT30xx
 	// 8051 firmware require the signal during booting time.
 	AsicSendCommandToMcu(pAd, 0x72, 0xFF, 0x00, 0x00);
+#endif
 
 	if (pAd && (Status != NDIS_STATUS_SUCCESS))
 	{
@@ -561,9 +547,24 @@ static int rt28xx_init(IN struct net_device *net_dev)
 		// Microsoft HCT require driver send a disconnect event after driver initialization.
 		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
 		RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE);
+
 		DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event B!\n"));
 
 
+#ifdef RT2870
+		RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS);
+		RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
+
+		//
+		// Support multiple BulkIn IRP,
+		// the value on pAd->CommonCfg.NumOfBulkInIRP may be large than 1.
+		//
+		for(index=0; index<pAd->CommonCfg.NumOfBulkInIRP; index++)
+		{
+			RTUSBBulkReceive(pAd);
+			DBGPRINT(RT_DEBUG_TRACE, ("RTUSBBulkReceive!\n" ));
+		}
+#endif // RT2870 //
 	}// end of else
 
 
@@ -578,17 +579,12 @@ err3:
 err2:
 	RTMPFreeTxRxRingMemory(pAd);
 err1:
-
-#ifdef DOT11_N_SUPPORT
 	os_free_mem(pAd, pAd->mpdu_blk_pool.mem); // free BA pool
-#endif // DOT11_N_SUPPORT //
 	RT28XX_IRQ_RELEASE(net_dev);
 
 	// shall not set ml_priv to NULL here because the ml_priv didn't been free yet.
 	//net_dev->ml_priv = 0;
-#ifdef INF_AMAZON_SE
-err0:
-#endif // INF_AMAZON_SE //
+
 	printk("!!! %s Initialized fail !!!\n", RT28xx_CHIP_NAME);
 	return FALSE;
 } /* End of rt28xx_init */
@@ -625,27 +621,6 @@ int rt28xx_open(IN PNET_DEV dev)
 		return -1;
 	}
 
-#ifdef CONFIG_APSTA_MIXED_SUPPORT
-	if (pAd->OpMode == OPMODE_AP)
-	{
-		CW_MAX_IN_BITS = 6;
-	}
-	else if (pAd->OpMode == OPMODE_STA)
-	{
-		CW_MAX_IN_BITS = 10;
-	}
-
-#if WIRELESS_EXT >= 12
-	if (net_dev->priv_flags == INT_MAIN)
-	{
-		if (pAd->OpMode == OPMODE_AP)
-			net_dev->wireless_handlers = (struct iw_handler_def *) &rt28xx_ap_iw_handler_def;
-		else if (pAd->OpMode == OPMODE_STA)
-			net_dev->wireless_handlers = (struct iw_handler_def *) &rt28xx_iw_handler_def;
-	}
-#endif // WIRELESS_EXT >= 12 //
-#endif // CONFIG_APSTA_MIXED_SUPPORT //
-
 	// Init
  	pObj = (POS_COOKIE)pAd->OS_Cookie;
 
@@ -664,13 +639,8 @@ int rt28xx_open(IN PNET_DEV dev)
 	if (rt28xx_init(net_dev) == FALSE)
 		goto err;
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		NdisZeroMemory(pAd->StaCfg.dev_name, 16);
-		NdisMoveMemory(pAd->StaCfg.dev_name, net_dev->name, strlen(net_dev->name));
-	}
-#endif // CONFIG_STA_SUPPORT //
+	NdisZeroMemory(pAd->StaCfg.dev_name, 16);
+	NdisMoveMemory(pAd->StaCfg.dev_name, net_dev->name, strlen(net_dev->name));
 
 	// Set up the Mac address
 	NdisMoveMemory(net_dev->dev_addr, (void *) pAd->CurrentAddress, 6);
@@ -680,24 +650,6 @@ int rt28xx_open(IN PNET_DEV dev)
 
 	// Various AP function init
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-		{
-			union iwreq_data    wrqu;
-			// send wireless event to wpa_supplicant for infroming interface down.
-			memset(&wrqu, 0, sizeof(wrqu));
-			wrqu.data.flags = RT_INTERFACE_UP;
-			wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL);
-		}
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-	}
-#endif // CONFIG_STA_SUPPORT //
-
 	// Enable Interrupt
 	RT28XX_IRQ_ENABLE(pAd);
 
@@ -711,11 +663,9 @@ int rt28xx_open(IN PNET_DEV dev)
 	printk("0x1300 = %08x\n", reg);
 	}
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+#ifdef RT2860
         RTMPInitPCIeLinkCtrlValue(pAd);
-#endif // CONFIG_STA_SUPPORT //
-
+#endif
 	return (retval);
 
 err:
@@ -745,26 +695,12 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p
 	CHAR    slot_name[IFNAMSIZ];
 	struct net_device   *device;
 
-
-	//ether_setup(dev);
-
-#ifdef CONFIG_STA_SUPPORT
 #if WIRELESS_EXT >= 12
 	if (pAd->OpMode == OPMODE_STA)
 	{
 		dev->wireless_handlers = &rt28xx_iw_handler_def;
 	}
 #endif //WIRELESS_EXT >= 12
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef CONFIG_APSTA_MIXED_SUPPORT
-#if WIRELESS_EXT >= 12
-	if (pAd->OpMode == OPMODE_AP)
-	{
-		dev->wireless_handlers = &rt28xx_ap_iw_handler_def;
-	}
-#endif //WIRELESS_EXT >= 12
-#endif // CONFIG_APSTA_MIXED_SUPPORT //
 
 #if WIRELESS_EXT < 21
 		dev->get_wireless_stats = rt28xx_get_wireless_stats;
@@ -774,11 +710,6 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p
 	// find available device name
 	for (i = 0; i < 8; i++)
 	{
-#ifdef MULTIPLE_CARD_SUPPORT
-		if (pAd->MC_RowID >= 0)
-			sprintf(slot_name, "ra%02d_%d", pAd->MC_RowID, i);
-		else
-#endif // MULTIPLE_CARD_SUPPORT //
 		sprintf(slot_name, "ra%d", i);
 
 		device = dev_get_by_name(dev_net(dev), slot_name);
@@ -796,11 +727,6 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p
 	}
 	else
 	{
-#ifdef MULTIPLE_CARD_SUPPORT
-		if (pAd->MC_RowID >= 0)
-	        sprintf(dev->name, "ra%02d_%d", pAd->MC_RowID, i);
-		else
-#endif // MULTIPLE_CARD_SUPPORT //
 		sprintf(dev->name, "ra%d", i);
 		Status = NDIS_STATUS_SUCCESS;
 	}
@@ -809,369 +735,6 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p
 
 }
 
-
-#ifdef MULTIPLE_CARD_SUPPORT
-/*
-========================================================================
-Routine Description:
-    Get card profile path.
-
-Arguments:
-    pAd
-
-Return Value:
-    TRUE		- Find a card profile
-	FALSE		- use default profile
-
-Note:
-========================================================================
-*/
-extern INT RTMPGetKeyParameter(
-    IN  PCHAR   key,
-    OUT PCHAR   dest,
-    IN  INT     destsize,
-    IN  PCHAR   buffer);
-
-BOOLEAN RTMP_CardInfoRead(
-	IN	PRTMP_ADAPTER pAd)
-{
-#define MC_SELECT_CARDID		0	/* use CARD ID (0 ~ 31) to identify different cards */
-#define MC_SELECT_MAC			1	/* use CARD MAC to identify different cards */
-#define MC_SELECT_CARDTYPE		2	/* use CARD type (abgn or bgn) to identify different cards */
-
-#define LETTER_CASE_TRANSLATE(txt_p, card_id)			\
-	{	UINT32 _len; char _char;						\
-		for(_len=0; _len<strlen(card_id); _len++) {		\
-			_char = *(txt_p + _len);					\
-			if (('A' <= _char) && (_char <= 'Z'))		\
-				*(txt_p+_len) = 'a'+(_char-'A');		\
-		} }
-
-	struct file *srcf;
-	INT retval, orgfsuid, orgfsgid;
-   	mm_segment_t orgfs;
-	CHAR *buffer, *tmpbuf, card_id_buf[30], RFIC_word[30];
-	BOOLEAN flg_match_ok = FALSE;
-	INT32 card_select_method;
-	INT32 card_free_id, card_nouse_id, card_same_mac_id, card_match_id;
-	EEPROM_ANTENNA_STRUC antenna;
-	USHORT addr01, addr23, addr45;
-	UINT8 mac[6];
-	UINT32 data, card_index;
-	UCHAR *start_ptr;
-
-
-	// init
-	buffer = kmalloc(MAX_INI_BUFFER_SIZE, MEM_ALLOC_FLAG);
-	if (buffer == NULL)
-        return FALSE;
-
-	tmpbuf = kmalloc(MAX_PARAM_BUFFER_SIZE, MEM_ALLOC_FLAG);
-	if(tmpbuf == NULL)
-	{
-		kfree(buffer);
-        return NDIS_STATUS_FAILURE;
-	}
-
-	orgfsuid = current->fsuid;
-	orgfsgid = current->fsgid;
-	current->fsuid = current->fsgid = 0;
-    orgfs = get_fs();
-    set_fs(KERNEL_DS);
-
-	// get RF IC type
-	RTMP_IO_READ32(pAd, E2PROM_CSR, &data);
-
-	if ((data & 0x30) == 0)
-		pAd->EEPROMAddressNum = 6;	// 93C46
-	else if ((data & 0x30) == 0x10)
-		pAd->EEPROMAddressNum = 8;	// 93C66
-	else
-		pAd->EEPROMAddressNum = 8;	// 93C86
-
-	RT28xx_EEPROM_READ16(pAd, EEPROM_NIC1_OFFSET, antenna.word);
-
-	if ((antenna.field.RfIcType == RFIC_2850) ||
-		(antenna.field.RfIcType == RFIC_2750))
-	{
-		/* ABGN card */
-		strcpy(RFIC_word, "abgn");
-	}
-	else
-	{
-		/* BGN card */
-		strcpy(RFIC_word, "bgn");
-	}
-
-	// get MAC address
-	RT28xx_EEPROM_READ16(pAd, 0x04, addr01);
-	RT28xx_EEPROM_READ16(pAd, 0x06, addr23);
-	RT28xx_EEPROM_READ16(pAd, 0x08, addr45);
-
-	mac[0] = (UCHAR)(addr01 & 0xff);
-	mac[1] = (UCHAR)(addr01 >> 8);
-	mac[2] = (UCHAR)(addr23 & 0xff);
-	mac[3] = (UCHAR)(addr23 >> 8);
-	mac[4] = (UCHAR)(addr45 & 0xff);
-	mac[5] = (UCHAR)(addr45 >> 8);
-
-	// open card information file
-	srcf = filp_open(CARD_INFO_PATH, O_RDONLY, 0);
-	if (IS_ERR(srcf))
-	{
-		/* card information file does not exist */
-			DBGPRINT(RT_DEBUG_TRACE,
-				("--> Error %ld opening %s\n", -PTR_ERR(srcf), CARD_INFO_PATH));
-		return FALSE;
-	}
-
-	if (srcf->f_op && srcf->f_op->read)
-	{
-		/* card information file exists so reading the card information */
-		memset(buffer, 0x00, MAX_INI_BUFFER_SIZE);
-		retval = srcf->f_op->read(srcf, buffer, MAX_INI_BUFFER_SIZE, &srcf->f_pos);
-		if (retval < 0)
-		{
-			/* read fail */
-				DBGPRINT(RT_DEBUG_TRACE,
-					("--> Read %s error %d\n", CARD_INFO_PATH, -retval));
-		}
-		else
-		{
-			/* get card selection method */
-			memset(tmpbuf, 0x00, MAX_PARAM_BUFFER_SIZE);
-			card_select_method = MC_SELECT_CARDTYPE; // default
-
-			if (RTMPGetKeyParameter("SELECT", tmpbuf, 256, buffer))
-			{
-				if (strcmp(tmpbuf, "CARDID") == 0)
-					card_select_method = MC_SELECT_CARDID;
-				else if (strcmp(tmpbuf, "MAC") == 0)
-					card_select_method = MC_SELECT_MAC;
-				else if (strcmp(tmpbuf, "CARDTYPE") == 0)
-					card_select_method = MC_SELECT_CARDTYPE;
-			}
-
-			DBGPRINT(RT_DEBUG_TRACE,
-					("MC> Card Selection = %d\n", card_select_method));
-
-			// init
-			card_free_id = -1;
-			card_nouse_id = -1;
-			card_same_mac_id = -1;
-			card_match_id = -1;
-
-			// search current card information records
-			for(card_index=0;
-				card_index<MAX_NUM_OF_MULTIPLE_CARD;
-				card_index++)
-			{
-				if ((*(UINT32 *)&MC_CardMac[card_index][0] == 0) &&
-					(*(UINT16 *)&MC_CardMac[card_index][4] == 0))
-				{
-					// MAC is all-0 so the entry is available
-					MC_CardUsed[card_index] = 0;
-
-					if (card_free_id < 0)
-						card_free_id = card_index; // 1st free entry
-				}
-				else
-				{
-					if (memcmp(MC_CardMac[card_index], mac, 6) == 0)
-					{
-						// we find the entry with same MAC
-						if (card_same_mac_id < 0)
-							card_same_mac_id = card_index; // 1st same entry
-					}
-					else
-					{
-						// MAC is not all-0 but used flag == 0
-						if ((MC_CardUsed[card_index] == 0) &&
-							(card_nouse_id < 0))
-						{
-							card_nouse_id = card_index; // 1st available entry
-						}
-					}
-				}
-			}
-
-			DBGPRINT(RT_DEBUG_TRACE,
-					("MC> Free = %d, Same = %d, NOUSE = %d\n",
-					card_free_id, card_same_mac_id, card_nouse_id));
-
-			if ((card_same_mac_id >= 0) &&
-				((card_select_method == MC_SELECT_CARDID) ||
-				(card_select_method == MC_SELECT_CARDTYPE)))
-			{
-				// same MAC entry is found
-				card_match_id = card_same_mac_id;
-
-				if (card_select_method == MC_SELECT_CARDTYPE)
-				{
-					// for CARDTYPE
-					sprintf(card_id_buf, "%02dCARDTYPE%s",
-							card_match_id, RFIC_word);
-
-					if ((start_ptr=rtstrstruncasecmp(buffer, card_id_buf)) != NULL)
-					{
-						// we found the card ID
-						LETTER_CASE_TRANSLATE(start_ptr, card_id_buf);
-					}
-				}
-			}
-			else
-			{
-				// the card is 1st plug-in, try to find the match card profile
-				switch(card_select_method)
-				{
-					case MC_SELECT_CARDID: // CARDID
-					default:
-						if (card_free_id >= 0)
-							card_match_id = card_free_id;
-						else
-							card_match_id = card_nouse_id;
-						break;
-
-					case MC_SELECT_MAC: // MAC
-						sprintf(card_id_buf, "MAC%02x:%02x:%02x:%02x:%02x:%02x",
-								mac[0], mac[1], mac[2],
-								mac[3], mac[4], mac[5]);
-
-						/* try to find the key word in the card file */
-						if ((start_ptr=rtstrstruncasecmp(buffer, card_id_buf)) != NULL)
-						{
-							LETTER_CASE_TRANSLATE(start_ptr, card_id_buf);
-
-							/* get the row ID (2 ASCII characters) */
-							start_ptr -= 2;
-							card_id_buf[0] = *(start_ptr);
-							card_id_buf[1] = *(start_ptr+1);
-							card_id_buf[2] = 0x00;
-
-							card_match_id = simple_strtol(card_id_buf, 0, 10);
-						}
-						break;
-
-					case MC_SELECT_CARDTYPE: // CARDTYPE
-						card_nouse_id = -1;
-
-						for(card_index=0;
-							card_index<MAX_NUM_OF_MULTIPLE_CARD;
-							card_index++)
-						{
-							sprintf(card_id_buf, "%02dCARDTYPE%s",
-									card_index, RFIC_word);
-
-							if ((start_ptr=rtstrstruncasecmp(buffer,
-														card_id_buf)) != NULL)
-							{
-								LETTER_CASE_TRANSLATE(start_ptr, card_id_buf);
-
-								if (MC_CardUsed[card_index] == 0)
-								{
-									/* current the card profile is not used */
-									if ((*(UINT32 *)&MC_CardMac[card_index][0] == 0) &&
-										(*(UINT16 *)&MC_CardMac[card_index][4] == 0))
-									{
-										// find it and no previous card use it
-										card_match_id = card_index;
-										break;
-									}
-									else
-									{
-										// ever a card use it
-										if (card_nouse_id < 0)
-											card_nouse_id = card_index;
-									}
-								}
-							}
-						}
-
-						// if not find a free one, use the available one
-						if (card_match_id < 0)
-							card_match_id = card_nouse_id;
-						break;
-				}
-			}
-
-			if (card_match_id >= 0)
-			{
-				// make up search keyword
-				switch(card_select_method)
-				{
-					case MC_SELECT_CARDID: // CARDID
-						sprintf(card_id_buf, "%02dCARDID", card_match_id);
-						break;
-
-					case MC_SELECT_MAC: // MAC
-						sprintf(card_id_buf,
-								"%02dmac%02x:%02x:%02x:%02x:%02x:%02x",
-								card_match_id,
-								mac[0], mac[1], mac[2],
-								mac[3], mac[4], mac[5]);
-						break;
-
-					case MC_SELECT_CARDTYPE: // CARDTYPE
-					default:
-						sprintf(card_id_buf, "%02dcardtype%s",
-								card_match_id, RFIC_word);
-						break;
-				}
-
-				DBGPRINT(RT_DEBUG_TRACE, ("Search Keyword = %s\n", card_id_buf));
-
-				// read card file path
-				if (RTMPGetKeyParameter(card_id_buf, tmpbuf, 256, buffer))
-				{
-					if (strlen(tmpbuf) < sizeof(pAd->MC_FileName))
-					{
-						// backup card information
-						pAd->MC_RowID = card_match_id; /* base 0 */
-						MC_CardUsed[card_match_id] = 1;
-						memcpy(MC_CardMac[card_match_id], mac, sizeof(mac));
-
-						// backup card file path
-						NdisMoveMemory(pAd->MC_FileName, tmpbuf , strlen(tmpbuf));
-						pAd->MC_FileName[strlen(tmpbuf)] = '\0';
-						flg_match_ok = TRUE;
-
-						DBGPRINT(RT_DEBUG_TRACE,
-								("Card Profile Name = %s\n", pAd->MC_FileName));
-					}
-					else
-					{
-						DBGPRINT(RT_DEBUG_ERROR,
-								("Card Profile Name length too large!\n"));
-					}
-				}
-				else
-				{
-					DBGPRINT(RT_DEBUG_ERROR,
-							("Can not find search key word in card.dat!\n"));
-				}
-
-				if ((flg_match_ok != TRUE) &&
-					(card_match_id < MAX_NUM_OF_MULTIPLE_CARD))
-				{
-					MC_CardUsed[card_match_id] = 0;
-					memset(MC_CardMac[card_match_id], 0, sizeof(mac));
-				}
-			} // if (card_match_id >= 0)
-		}
-	}
-
-	// close file
-	retval = filp_close(srcf, NULL);
-	set_fs(orgfs);
-	current->fsuid = orgfsuid;
-	current->fsgid = orgfsgid;
-	kfree(buffer);
-	kfree(tmpbuf);
-	return flg_match_ok;
-}
-#endif // MULTIPLE_CARD_SUPPORT //
-
-
 /*
 ========================================================================
 Routine Description:
@@ -1198,12 +761,17 @@ INT __devinit   rt28xx_probe(
     PRTMP_ADAPTER       pAd = (PRTMP_ADAPTER) NULL;
     INT                 status;
 	PVOID				handle;
+#ifdef RT2860
 	struct pci_dev *dev_p = (struct pci_dev *)_dev_p;
+#endif
+#ifdef RT2870
+	struct usb_interface *intf = (struct usb_interface *)_dev_p;
+	struct usb_device *dev_p = interface_to_usbdev(intf);
 
+	dev_p = usb_get_dev(dev_p);
+#endif // RT2870 //
 
-#ifdef CONFIG_STA_SUPPORT
     DBGPRINT(RT_DEBUG_TRACE, ("STA Driver version-%s\n", STA_DRIVER_VERSION));
-#endif // CONFIG_STA_SUPPORT //
 
     net_dev = alloc_etherdev(sizeof(PRTMP_ADAPTER));
     if (net_dev == NULL)
@@ -1214,13 +782,12 @@ INT __devinit   rt28xx_probe(
     }
 
 	netif_stop_queue(net_dev);
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
+
 /* for supporting Network Manager */
 /* Set the sysfs physical device reference for the network logical device
  * if set prior to registration will cause a symlink during initialization.
  */
     SET_NETDEV_DEV(net_dev, &(dev_p->dev));
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
 
 	// Allocate RTMP_ADAPTER miniport adapter structure
 	handle = kmalloc(sizeof(struct os_cookie), GFP_KERNEL);
@@ -1235,32 +802,13 @@ INT __devinit   rt28xx_probe(
 
 	RT28XXNetDevInit(_dev_p, net_dev, pAd);
 
-#ifdef CONFIG_STA_SUPPORT
     pAd->StaCfg.OriDevType = net_dev->type;
-#endif // CONFIG_STA_SUPPORT //
 
 	// Post config
 	if (RT28XXProbePostConfig(_dev_p, pAd, 0) == FALSE)
 		goto err_out_unmap;
 
-#ifdef CONFIG_STA_SUPPORT
 	pAd->OpMode = OPMODE_STA;
-#endif // CONFIG_STA_SUPPORT //
-
-
-#ifdef MULTIPLE_CARD_SUPPORT
-	// find its profile path
-	pAd->MC_RowID = -1; // use default profile path
-	RTMP_CardInfoRead(pAd);
-
-	if (pAd->MC_RowID == -1)
-#ifdef CONFIG_STA_SUPPORT
-		strcpy(pAd->MC_FileName, STA_PROFILE_PATH);
-#endif // CONFIG_STA_SUPPORT //
-
-	DBGPRINT(RT_DEBUG_TRACE,
-			("MC> ROW = %d, PATH = %s\n", pAd->MC_RowID, pAd->MC_FileName));
-#endif // MULTIPLE_CARD_SUPPORT //
 
 	// sample move
 	if (rt_ieee80211_if_setup(net_dev, pAd) != NDIS_STATUS_SUCCESS)
@@ -1317,17 +865,6 @@ int rt28xx_packet_xmit(struct sk_buff *skb)
 	int status = 0;
 	PNDIS_PACKET pPacket = (PNDIS_PACKET) skb;
 
-	/* RT2870STA does this in RTMPSendPackets() */
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-	{
-		RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_RESOURCES);
-		return 0;
-	}
-#endif // RALINK_ATE //
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Drop send request since we are in monitor mode
 		if (MONITOR_ON(pAd))
@@ -1336,7 +873,6 @@ int rt28xx_packet_xmit(struct sk_buff *skb)
 			goto done;
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
         // EapolStart size is 18
 	if (skb->len < 14)
@@ -1354,16 +890,7 @@ int rt28xx_packet_xmit(struct sk_buff *skb)
     }
 #endif
 
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-
-		STASendPackets((NDIS_HANDLE)pAd, (PPNDIS_PACKET) &pPacket, 1);
-	}
-
-#endif // CONFIG_STA_SUPPORT //
+	STASendPackets((NDIS_HANDLE)pAd, (PPNDIS_PACKET) &pPacket, 1);
 
 	status = 0;
 done:
@@ -1432,10 +959,8 @@ struct iw_statistics *rt28xx_get_wireless_stats(
 	if(pAd->iw_stats.qual.qual > 100)
 		pAd->iw_stats.qual.qual = 100;
 
-#ifdef CONFIG_STA_SUPPORT
 	if (pAd->OpMode == OPMODE_STA)
 		pAd->iw_stats.qual.level = RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.LastRssi0, pAd->StaCfg.RssiSample.LastRssi1, pAd->StaCfg.RssiSample.LastRssi2);
-#endif // CONFIG_STA_SUPPORT //
 
 	pAd->iw_stats.qual.noise = pAd->BbpWriteLatch[66]; // noise level (dBm)
 
@@ -1487,13 +1012,7 @@ INT rt28xx_ioctl(
 		return -ENETDOWN;
 	}
 
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		ret = rt28xx_sta_ioctl(net_dev, rq, cmd);
-	}
-#endif // CONFIG_STA_SUPPORT //
+	ret = rt28xx_sta_ioctl(net_dev, rq, cmd);
 
 	return ret;
 }
diff --git a/drivers/staging/rt2860/rt_profile.c b/drivers/staging/rt2860/rt_profile.c
index 62141f37697..d92b14328d4 100644
--- a/drivers/staging/rt2860/rt_profile.c
+++ b/drivers/staging/rt2860/rt_profile.c
@@ -27,12 +27,10 @@
 
 #include "rt_config.h"
 
-#ifdef DOT11_N_SUPPORT
 static void HTParametersHook(
 	IN	PRTMP_ADAPTER pAd,
 	IN	CHAR		  *pValueStr,
 	IN	CHAR		  *pInput);
-#endif // DOT11_N_SUPPORT //
 
 #define ETH_MAC_ADDR_STR_LEN 17  // in format of xx:xx:xx:xx:xx:xx
 
@@ -756,9 +754,6 @@ static void rtmp_read_key_parms_from_file(IN  PRTMP_ADAPTER pAd, char *tmpbuf, c
 	//DefaultKeyID
 	if(RTMPGetKeyParameter("DefaultKeyID", tmpbuf, 25, buffer))
 	{
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			KeyIdx = simple_strtol(tmpbuf, 0, 10);
 			if((KeyIdx >= 1 ) && (KeyIdx <= 4))
@@ -768,7 +763,6 @@ static void rtmp_read_key_parms_from_file(IN  PRTMP_ADAPTER pAd, char *tmpbuf, c
 
 			DBGPRINT(RT_DEBUG_TRACE, ("DefaultKeyID(0~3)=%d\n", pAd->StaCfg.DefaultKeyId));
 		}
-#endif // CONFIG_STA_SUPPORT //
 	}
 
 
@@ -783,8 +777,6 @@ static void rtmp_read_key_parms_from_file(IN  PRTMP_ADAPTER pAd, char *tmpbuf, c
 			    KeyType[i] = simple_strtol(macptr, 0, 10);
 		    }
 
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			{
 				sprintf(tok_str, "Key%dStr", idx + 1);
 				if (RTMPGetCriticalParameter(tok_str, tmpbuf, 128, buffer))
@@ -792,13 +784,10 @@ static void rtmp_read_key_parms_from_file(IN  PRTMP_ADAPTER pAd, char *tmpbuf, c
 					rtmp_parse_key_buffer_from_file(pAd, tmpbuf, KeyType[BSS0], BSS0, idx);
 				}
 			}
-#endif // CONFIG_STA_SUPPORT //
 		}
 	}
 }
 
-
-#ifdef CONFIG_STA_SUPPORT
 static void rtmp_read_sta_wmm_parms_from_file(IN  PRTMP_ADAPTER pAd, char *tmpbuf, char *buffer)
 {
 	PUCHAR					macptr;
@@ -821,23 +810,6 @@ static void rtmp_read_sta_wmm_parms_from_file(IN  PRTMP_ADAPTER pAd, char *tmpbu
 		DBGPRINT(RT_DEBUG_TRACE, ("WmmCapable=%d\n", pAd->CommonCfg.bWmmCapable));
 	}
 
-#ifdef QOS_DLS_SUPPORT
-	//DLSCapable
-	if(RTMPGetKeyParameter("DLSCapable", tmpbuf, 32, buffer))
-	{
-		if(simple_strtol(tmpbuf, 0, 10) != 0)  //Enable
-		{
-			pAd->CommonCfg.bDLSCapable = TRUE;
-		}
-		else //Disable
-		{
-			pAd->CommonCfg.bDLSCapable = FALSE;
-		}
-
-		DBGPRINT(RT_DEBUG_TRACE, ("bDLSCapable=%d\n", pAd->CommonCfg.bDLSCapable));
-	}
-#endif // QOS_DLS_SUPPORT //
-
 	//AckPolicy for AC_BK, AC_BE, AC_VI, AC_VO
 	if(RTMPGetKeyParameter("AckPolicy", tmpbuf, 32, buffer))
 	{
@@ -882,8 +854,6 @@ static void rtmp_read_sta_wmm_parms_from_file(IN  PRTMP_ADAPTER pAd, char *tmpbu
 	}
 
 }
-#endif // CONFIG_STA_SUPPORT //
-
 
 NDIS_STATUS	RTMPReadParametersHook(
 	IN	PRTMP_ADAPTER pAd)
@@ -896,10 +866,7 @@ NDIS_STATUS	RTMPReadParametersHook(
 	CHAR					*tmpbuf;
 	ULONG					RtsThresh;
 	ULONG					FragThresh;
-#ifdef CONFIG_STA_SUPPORT
 	UCHAR	                keyMaterial[40];
-#endif // CONFIG_STA_SUPPORT //
-
 
 	PUCHAR					macptr;
 	INT						i = 0;
@@ -915,21 +882,17 @@ NDIS_STATUS	RTMPReadParametersHook(
         return NDIS_STATUS_FAILURE;
 	}
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		src = STA_PROFILE_PATH;
-#endif // CONFIG_STA_SUPPORT //
-#ifdef MULTIPLE_CARD_SUPPORT
-	src = pAd->MC_FileName;
-#endif // MULTIPLE_CARD_SUPPORT //
+	src = STA_PROFILE_PATH;
 
 	// Save uid and gid used for filesystem access.
 	// Set user and group to 0 (root)
+#ifndef RT30xx
 	orgfsuid = current_fsuid();
 	orgfsgid = current_fsgid();
 	/* Hm, can't really do this nicely anymore, so rely on these files
 	 * being set to the proper permission to read them... */
 	/* current->cred->fsuid = current->cred->fsgid = 0; */
+#endif
     orgfs = get_fs();
     set_fs(KERNEL_DS);
 
@@ -970,12 +933,7 @@ NDIS_STATUS	RTMPReadParametersHook(
 					if(RTMPGetKeyParameter("CountryCode", tmpbuf, 25, buffer))
 					{
 						NdisMoveMemory(pAd->CommonCfg.CountryCode, tmpbuf , 2);
-#ifdef CONFIG_STA_SUPPORT
-#ifdef EXT_BUILD_CHANNEL_LIST
-						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-							NdisMoveMemory(pAd->StaCfg.StaOriCountryCode, tmpbuf , 2);
-#endif // EXT_BUILD_CHANNEL_LIST //
-#endif // CONFIG_STA_SUPPORT //
+
 						if (strlen(pAd->CommonCfg.CountryCode) != 0)
 						{
 							pAd->CommonCfg.bCountryFlag = TRUE;
@@ -991,12 +949,6 @@ NDIS_STATUS	RTMPReadParametersHook(
 							pAd->CommonCfg.Geography = Geography;
 							pAd->CommonCfg.CountryCode[2] =
 								(pAd->CommonCfg.Geography == BOTH) ? ' ' : ((pAd->CommonCfg.Geography == IDOR) ? 'I' : 'O');
-#ifdef CONFIG_STA_SUPPORT
-#ifdef EXT_BUILD_CHANNEL_LIST
-						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-							pAd->StaCfg.StaOriGeography = pAd->CommonCfg.Geography;
-#endif // EXT_BUILD_CHANNEL_LIST //
-#endif // CONFIG_STA_SUPPORT //
 							DBGPRINT(RT_DEBUG_TRACE, ("ChannelGeography=%d\n", pAd->CommonCfg.Geography));
 						}
 					}
@@ -1006,9 +958,6 @@ NDIS_STATUS	RTMPReadParametersHook(
 						pAd->CommonCfg.CountryCode[2] = ' ';
 					}
 
-
-#ifdef CONFIG_STA_SUPPORT
-					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 					{
 						//SSID
 						if (RTMPGetCriticalParameter("SSID", tmpbuf, 256, buffer))
@@ -1028,10 +977,7 @@ NDIS_STATUS	RTMPReadParametersHook(
 							}
 						}
 					}
-#endif // CONFIG_STA_SUPPORT //
 
-#ifdef CONFIG_STA_SUPPORT
-					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 					{
 						//NetworkType
 						if (RTMPGetKeyParameter("NetworkType", tmpbuf, 25, buffer))
@@ -1046,7 +992,7 @@ NDIS_STATUS	RTMPReadParametersHook(
 							DBGPRINT(RT_DEBUG_TRACE, ("%s::(NetworkType=%d)\n", __func__, pAd->StaCfg.BssType));
 						}
 					}
-#endif // CONFIG_STA_SUPPORT //
+
 					//Channel
 					if(RTMPGetKeyParameter("Channel", tmpbuf, 10, buffer))
 					{
@@ -1058,9 +1004,7 @@ NDIS_STATUS	RTMPReadParametersHook(
 					{
 						int value  = 0, maxPhyMode = PHY_11G;
 
-#ifdef DOT11_N_SUPPORT
 						maxPhyMode = PHY_11N_5G;
-#endif // DOT11_N_SUPPORT //
 
 						value = simple_strtol(tmpbuf, 0, 10);
 
@@ -1086,10 +1030,9 @@ NDIS_STATUS	RTMPReadParametersHook(
 					if(RTMPGetKeyParameter("TxPower", tmpbuf, 10, buffer))
 					{
 						pAd->CommonCfg.TxPowerPercentage = (ULONG) simple_strtol(tmpbuf, 0, 10);
-#ifdef CONFIG_STA_SUPPORT
-						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-							pAd->CommonCfg.TxPowerDefault = pAd->CommonCfg.TxPowerPercentage;
-#endif // CONFIG_STA_SUPPORT //
+
+						pAd->CommonCfg.TxPowerDefault = pAd->CommonCfg.TxPowerPercentage;
+
 						DBGPRINT(RT_DEBUG_TRACE, ("TxPower=%ld\n", pAd->CommonCfg.TxPowerPercentage));
 					}
 					//BGProtection
@@ -1206,11 +1149,7 @@ NDIS_STATUS	RTMPReadParametersHook(
 #endif // AGGREGATION_SUPPORT //
 
 					// WmmCapable
-
-#ifdef CONFIG_STA_SUPPORT
-					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-						rtmp_read_sta_wmm_parms_from_file(pAd, tmpbuf, buffer);
-#endif // CONFIG_STA_SUPPORT //
+					rtmp_read_sta_wmm_parms_from_file(pAd, tmpbuf, buffer);
 
 					//ShortSlot
 					if(RTMPGetKeyParameter("ShortSlot", tmpbuf, 10, buffer))
@@ -1313,8 +1252,6 @@ NDIS_STATUS	RTMPReadParametersHook(
 					//AuthMode
 					if(RTMPGetKeyParameter("AuthMode", tmpbuf, 128, buffer))
 					{
-#ifdef CONFIG_STA_SUPPORT
-						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 						{
 							if ((strcmp(tmpbuf, "WEPAUTO") == 0) || (strcmp(tmpbuf, "wepauto") == 0))
 							    pAd->StaCfg.AuthMode = Ndis802_11AuthModeAutoSwitch;
@@ -1326,12 +1263,10 @@ NDIS_STATUS	RTMPReadParametersHook(
 							    pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPANone;
 							else if ((strcmp(tmpbuf, "WPA2PSK") == 0) || (strcmp(tmpbuf, "wpa2psk") == 0))
 							    pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPA2PSK;
-#ifdef WPA_SUPPLICANT_SUPPORT
 							else if ((strcmp(tmpbuf, "WPA") == 0) || (strcmp(tmpbuf, "wpa") == 0))
 							    pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPA;
 							else if ((strcmp(tmpbuf, "WPA2") == 0) || (strcmp(tmpbuf, "wpa2") == 0))
 							    pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPA2;
-#endif // WPA_SUPPLICANT_SUPPORT //
 				                        else
 				                            pAd->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
 
@@ -1339,14 +1274,10 @@ NDIS_STATUS	RTMPReadParametersHook(
 
 							DBGPRINT(RT_DEBUG_TRACE, ("%s::(EncrypType=%d)\n", __func__, pAd->StaCfg.WepStatus));
 						}
-#endif // CONFIG_STA_SUPPORT //
 					}
 					//EncrypType
 					if(RTMPGetKeyParameter("EncrypType", tmpbuf, 128, buffer))
 					{
-
-#ifdef CONFIG_STA_SUPPORT
-						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 						{
 							if ((strcmp(tmpbuf, "WEP") == 0) || (strcmp(tmpbuf, "wep") == 0))
 								pAd->StaCfg.WepStatus	= Ndis802_11WEPEnabled;
@@ -1365,13 +1296,8 @@ NDIS_STATUS	RTMPReadParametersHook(
 
 							DBGPRINT(RT_DEBUG_TRACE, ("%s::(EncrypType=%d)\n", __func__, pAd->StaCfg.WepStatus));
 						}
-#endif // CONFIG_STA_SUPPORT //
 					}
 
-
-
-#ifdef CONFIG_STA_SUPPORT
-					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 					{
 						if(RTMPGetCriticalParameter("WPAPSK", tmpbuf, 512, buffer))
 						{
@@ -1420,38 +1346,20 @@ NDIS_STATUS	RTMPReadParametersHook(
 							}
 						}
 					}
-#endif // CONFIG_STA_SUPPORT //
 
 					//DefaultKeyID, KeyType, KeyStr
 					rtmp_read_key_parms_from_file(pAd, tmpbuf, buffer);
 
-#ifdef DOT11_N_SUPPORT
 					HTParametersHook(pAd, tmpbuf, buffer);
-#endif // DOT11_N_SUPPORT //
 
-
-#ifdef CARRIER_DETECTION_SUPPORT
-						//CarrierDetect
-						if(RTMPGetKeyParameter("CarrierDetect", tmpbuf, 128, buffer))
-						{
-							if ((strncmp(tmpbuf, "0", 1) == 0))
-								pAd->CommonCfg.CarrierDetect.Enable = FALSE;
-							else if ((strncmp(tmpbuf, "1", 1) == 0))
-								pAd->CommonCfg.CarrierDetect.Enable = TRUE;
-							else
-								pAd->CommonCfg.CarrierDetect.Enable = FALSE;
-
-							DBGPRINT(RT_DEBUG_TRACE, ("CarrierDetect.Enable=%d\n", pAd->CommonCfg.CarrierDetect.Enable));
-						}
-						else
-							pAd->CommonCfg.CarrierDetect.Enable = FALSE;
-#endif // CARRIER_DETECTION_SUPPORT //
-
-#ifdef CONFIG_STA_SUPPORT
-					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 					{
 						//PSMode
+#ifdef RT2860
 						if (RTMPGetKeyParameter("PSMode", tmpbuf, 32, buffer))
+#endif
+#ifdef RT2870
+						if (RTMPGetKeyParameter("PSMode", tmpbuf, 10, buffer))
+#endif
 						{
 							if (pAd->StaCfg.BssType == BSS_INFRA)
 							{
@@ -1534,8 +1442,23 @@ NDIS_STATUS	RTMPReadParametersHook(
 								DBGPRINT(RT_DEBUG_TRACE, ("TGnWifiTest=%d\n", pAd->StaCfg.bTGnWifiTest));
 						}
 					}
-#endif // CONFIG_STA_SUPPORT //
 
+#ifdef RT30xx
+						{
+							if(RTMPGetKeyParameter("AntDiversity", tmpbuf, 10, buffer))
+							{
+								for (i = 0, macptr = rstrtok(tmpbuf,";"); macptr; macptr = rstrtok(NULL,";"), i++)
+								{
+									if(simple_strtol(macptr, 0, 10) != 0)  //Enable
+										pAd->CommonCfg.bRxAntDiversity = TRUE;
+									else //Disable
+										pAd->CommonCfg.bRxAntDiversity = FALSE;
+
+									DBGPRINT(RT_DEBUG_ERROR, ("AntDiversity=%d\n", pAd->CommonCfg.bRxAntDiversity));
+								}
+							}
+						}
+#endif // RT30xx //
 				}
 			}
 			else
@@ -1554,18 +1477,12 @@ NDIS_STATUS	RTMPReadParametersHook(
 
 	set_fs(orgfs);
 
-#if 0
-	current->cred->fsuid = orgfsuid;
-	current->cred->fsgid = orgfsgid;
-#endif
-
 	kfree(buffer);
 	kfree(tmpbuf);
 
 	return (NDIS_STATUS_SUCCESS);
 }
 
-#ifdef DOT11_N_SUPPORT
 static void	HTParametersHook(
 	IN	PRTMP_ADAPTER pAd,
 	IN	CHAR		  *pValueStr,
@@ -1654,12 +1571,21 @@ static void	HTParametersHook(
         if (Value == 0)
         {
             pAd->CommonCfg.BACapability.field.AutoBA = FALSE;
+#ifdef RT30xx
+	    pAd->CommonCfg.BACapability.field.Policy = BA_NOTUSE;
+#endif
         }
         else
         {
             pAd->CommonCfg.BACapability.field.AutoBA = TRUE;
+#ifdef RT30xx
+	    pAd->CommonCfg.BACapability.field.Policy = IMMED_BA;
+#endif
         }
         pAd->CommonCfg.REGBACapability.field.AutoBA = pAd->CommonCfg.BACapability.field.AutoBA;
+#ifdef RT30xx
+	pAd->CommonCfg.REGBACapability.field.Policy = pAd->CommonCfg.BACapability.field.Policy;
+#endif
         DBGPRINT(RT_DEBUG_TRACE, ("HT: Auto BA  = %s\n", (Value==0) ? "Disable" : "Enable"));
     }
 
@@ -1804,8 +1730,6 @@ static void	HTParametersHook(
 	{
 		UCHAR	fix_tx_mode;
 
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			fix_tx_mode = FIXED_TXMODE_HT;
 
@@ -1837,7 +1761,6 @@ static void	HTParametersHook(
 			DBGPRINT(RT_DEBUG_TRACE, ("Fixed Tx Mode = %d\n", fix_tx_mode));
 
 		}
-#endif // CONFIG_STA_SUPPORT //
 	}
 
 
@@ -1882,9 +1805,6 @@ static void	HTParametersHook(
 	// MSC
 	if (RTMPGetKeyParameter("HT_MCS", pValueStr, 50, pInput))
 	{
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			Value = simple_strtol(pValueStr, 0, 10);
 
@@ -1901,7 +1821,6 @@ static void	HTParametersHook(
 				DBGPRINT(RT_DEBUG_TRACE, ("HT: MCS = AUTO\n"));
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 	}
 
 	// STBC
@@ -1977,5 +1896,3 @@ static void	HTParametersHook(
 	}
 
 }
-#endif // DOT11_N_SUPPORT //
-
diff --git a/drivers/staging/rt2860/rtmp.h b/drivers/staging/rt2860/rtmp.h
index b904b7886c2..25c31998d07 100644
--- a/drivers/staging/rt2860/rtmp.h
+++ b/drivers/staging/rt2860/rtmp.h
@@ -43,25 +43,112 @@
 #include "link_list.h"
 #include "spectrum_def.h"
 
-
-#ifdef CONFIG_STA_SUPPORT
 #include "aironet.h"
-#endif // CONFIG_STA_SUPPORT //
 
 //#define DBG_DIAGNOSE		1
 
-#if defined(CONFIG_AP_SUPPORT) && defined(CONFIG_STA_SUPPORT)
-#define IF_DEV_CONFIG_OPMODE_ON_AP(_pAd)	if(_pAd->OpMode == OPMODE_AP)
-#define IF_DEV_CONFIG_OPMODE_ON_STA(_pAd)	if(_pAd->OpMode == OPMODE_STA)
-#else
-#define IF_DEV_CONFIG_OPMODE_ON_AP(_pAd)
-#define IF_DEV_CONFIG_OPMODE_ON_STA(_pAd)
-#endif
-
 #define VIRTUAL_IF_INC(__pAd) ((__pAd)->VirtualIfCnt++)
 #define VIRTUAL_IF_DEC(__pAd) ((__pAd)->VirtualIfCnt--)
 #define VIRTUAL_IF_NUM(__pAd) ((__pAd)->VirtualIfCnt)
 
+#ifdef RT2870
+////////////////////////////////////////////////////////////////////////////
+// The TX_BUFFER structure forms the transmitted USB packet to the device
+////////////////////////////////////////////////////////////////////////////
+typedef struct __TX_BUFFER{
+	union	{
+		UCHAR			WirelessPacket[TX_BUFFER_NORMSIZE];
+		HEADER_802_11	NullFrame;
+		PSPOLL_FRAME	PsPollPacket;
+		RTS_FRAME		RTSFrame;
+	}field;
+	UCHAR			Aggregation[4];  //Buffer for save Aggregation size.
+} TX_BUFFER, *PTX_BUFFER;
+
+typedef struct __HTTX_BUFFER{
+	union	{
+		UCHAR			WirelessPacket[MAX_TXBULK_SIZE];
+		HEADER_802_11	NullFrame;
+		PSPOLL_FRAME	PsPollPacket;
+		RTS_FRAME		RTSFrame;
+	}field;
+	UCHAR			Aggregation[4];  //Buffer for save Aggregation size.
+} HTTX_BUFFER, *PHTTX_BUFFER;
+
+
+// used to track driver-generated write irps
+typedef struct _TX_CONTEXT
+{
+	PVOID			pAd;		//Initialized in MiniportInitialize
+	PURB			pUrb;			//Initialized in MiniportInitialize
+	PIRP			pIrp;			//used to cancel pending bulk out.
+									//Initialized in MiniportInitialize
+	PTX_BUFFER		TransferBuffer;	//Initialized in MiniportInitialize
+	ULONG			BulkOutSize;
+	UCHAR			BulkOutPipeId;
+	UCHAR			SelfIdx;
+	BOOLEAN			InUse;
+	BOOLEAN			bWaitingBulkOut; // at least one packet is in this TxContext, ready for making IRP anytime.
+	BOOLEAN			bFullForBulkOut; // all tx buffer are full , so waiting for tx bulkout.
+	BOOLEAN			IRPPending;
+	BOOLEAN			LastOne;
+	BOOLEAN			bAggregatible;
+	UCHAR			Header_802_3[LENGTH_802_3];
+	UCHAR			Rsv[2];
+	ULONG			DataOffset;
+	UINT			TxRate;
+	dma_addr_t		data_dma;		// urb dma on linux
+
+}	TX_CONTEXT, *PTX_CONTEXT, **PPTX_CONTEXT;
+
+
+// used to track driver-generated write irps
+typedef struct _HT_TX_CONTEXT
+{
+	PVOID			pAd;		//Initialized in MiniportInitialize
+	PURB			pUrb;			//Initialized in MiniportInitialize
+	PIRP			pIrp;			//used to cancel pending bulk out.
+									//Initialized in MiniportInitialize
+	PHTTX_BUFFER	TransferBuffer;	//Initialized in MiniportInitialize
+	ULONG			BulkOutSize;	// Indicate the total bulk-out size in bytes in one bulk-transmission
+	UCHAR			BulkOutPipeId;
+	BOOLEAN			IRPPending;
+	BOOLEAN			LastOne;
+	BOOLEAN			bCurWriting;
+	BOOLEAN			bRingEmpty;
+	BOOLEAN			bCopySavePad;
+	UCHAR			SavedPad[8];
+	UCHAR			Header_802_3[LENGTH_802_3];
+	ULONG			CurWritePosition;		// Indicate the buffer offset which packet will be inserted start from.
+	ULONG			CurWriteRealPos;		// Indicate the buffer offset which packet now are writing to.
+	ULONG			NextBulkOutPosition;	// Indicate the buffer start offset of a bulk-transmission
+	ULONG			ENextBulkOutPosition;	// Indicate the buffer end offset of a bulk-transmission
+	UINT			TxRate;
+	dma_addr_t		data_dma;		// urb dma on linux
+}	HT_TX_CONTEXT, *PHT_TX_CONTEXT, **PPHT_TX_CONTEXT;
+
+
+//
+// Structure to keep track of receive packets and buffers to indicate
+// receive data to the protocol.
+//
+typedef struct _RX_CONTEXT
+{
+	PUCHAR				TransferBuffer;
+	PVOID				pAd;
+	PIRP				pIrp;//used to cancel pending bulk in.
+	PURB				pUrb;
+	//These 2 Boolean shouldn't both be 1 at the same time.
+	ULONG				BulkInOffset;	// number of packets waiting for reordering .
+	BOOLEAN				bRxHandling;	// Notify this packet is being process now.
+	BOOLEAN				InUse;			// USB Hardware Occupied. Wait for USB HW to put packet.
+	BOOLEAN				Readable;		// Receive Complete back. OK for driver to indicate receiving packet.
+	BOOLEAN				IRPPending;		// TODO: To be removed
+	atomic_t			IrpLock;
+	NDIS_SPIN_LOCK		RxContextLock;
+	dma_addr_t			data_dma;		// urb dma on linux
+}	RX_CONTEXT, *PRX_CONTEXT;
+#endif // RT2870 //
 
 
 //
@@ -136,14 +223,9 @@ extern UCHAR  SsidIe;
 extern UCHAR  SupRateIe;
 extern UCHAR  ExtRateIe;
 
-#ifdef DOT11_N_SUPPORT
 extern UCHAR  HtCapIe;
 extern UCHAR  AddHtInfoIe;
 extern UCHAR  NewExtChanIe;
-#ifdef DOT11N_DRAFT3
-extern UCHAR  ExtHtCapIe;
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
 
 extern UCHAR  ErpIe;
 extern UCHAR  DsIe;
@@ -152,9 +234,15 @@ extern UCHAR  WpaIe;
 extern UCHAR  Wpa2Ie;
 extern UCHAR  IbssIe;
 extern UCHAR  Ccx2Ie;
+#ifdef RT30xx
+extern UCHAR  WapiIe;
+#endif
 
 extern UCHAR  WPA_OUI[];
 extern UCHAR  RSN_OUI[];
+#ifdef RT30xx
+extern UCHAR  WAPI_OUI[];
+#endif
 extern UCHAR  WME_INFO_ELEM[];
 extern UCHAR  WME_PARM_ELEM[];
 extern UCHAR  Ccx2QosInfo[];
@@ -168,7 +256,6 @@ extern UCHAR  RateSwitchTable11B[];
 extern UCHAR  RateSwitchTable11G[];
 extern UCHAR  RateSwitchTable11BG[];
 
-#ifdef DOT11_N_SUPPORT
 extern UCHAR  RateSwitchTable11BGN1S[];
 extern UCHAR  RateSwitchTable11BGN2S[];
 extern UCHAR  RateSwitchTable11BGN2SForABand[];
@@ -176,97 +263,10 @@ extern UCHAR  RateSwitchTable11N1S[];
 extern UCHAR  RateSwitchTable11N2S[];
 extern UCHAR  RateSwitchTable11N2SForABand[];
 
-#ifdef CONFIG_STA_SUPPORT
 extern UCHAR  PRE_N_HT_OUI[];
-#endif // CONFIG_STA_SUPPORT //
-#endif // DOT11_N_SUPPORT //
 
 #define	MAXSEQ		(0xFFF)
 
-#ifdef RALINK_ATE
-typedef	struct _ATE_INFO {
-	UCHAR	Mode;
-	CHAR	TxPower0;
-	CHAR	TxPower1;
-	CHAR    TxAntennaSel;
-	CHAR    RxAntennaSel;
-	TXWI_STRUC  TxWI; 	  // TXWI
-	USHORT	QID;
-	UCHAR	Addr1[MAC_ADDR_LEN];
-	UCHAR	Addr2[MAC_ADDR_LEN];
-	UCHAR	Addr3[MAC_ADDR_LEN];
-	UCHAR	Channel;
-	UINT32	TxLength;
-	UINT32	TxCount;
-	UINT32	TxDoneCount; // Tx DMA Done
-	UINT32	RFFreqOffset;
-	BOOLEAN	bRxFer;
-	BOOLEAN	bQATxStart; // Have compiled QA in and use it to ATE tx.
-	BOOLEAN	bQARxStart;	// Have compiled QA in and use it to ATE rx.
-	BOOLEAN	bFWLoading;	// Reload firmware when ATE is done.
-	UINT32	RxTotalCnt;
-	UINT32	RxCntPerSec;
-
-	CHAR	LastSNR0;             // last received SNR
-	CHAR    LastSNR1;             // last received SNR for 2nd  antenna
-	CHAR    LastRssi0;            // last received RSSI
-	CHAR    LastRssi1;            // last received RSSI for 2nd  antenna
-	CHAR    LastRssi2;            // last received RSSI for 3rd  antenna
-	CHAR    AvgRssi0;             // last 8 frames' average RSSI
-	CHAR    AvgRssi1;             // last 8 frames' average RSSI
-	CHAR    AvgRssi2;             // last 8 frames' average RSSI
-	SHORT   AvgRssi0X8;           // sum of last 8 frames' RSSI
-	SHORT   AvgRssi1X8;           // sum of last 8 frames' RSSI
-	SHORT   AvgRssi2X8;           // sum of last 8 frames' RSSI
-
-	UINT32	NumOfAvgRssiSample;
-
-#ifdef RALINK_28xx_QA
-	// Tx frame
-	USHORT		HLen; // Header Length
-	USHORT		PLen; // Pattern Length
-	UCHAR 		Header[32]; // Header buffer
-	UCHAR		Pattern[32]; // Pattern buffer
-	USHORT		DLen; // Data Length
-	USHORT		seq;
-	UINT32		CID;
-	THREAD_PID 		AtePid;
-	// counters
-	UINT32		U2M;
-	UINT32		OtherData;
-	UINT32		Beacon;
-	UINT32		OtherCount;
-	UINT32		TxAc0;
-	UINT32		TxAc1;
-	UINT32		TxAc2;
-	UINT32		TxAc3;
-	UINT32		TxHCCA;
-	UINT32		TxMgmt;
-	UINT32		RSSI0;
-	UINT32		RSSI1;
-	UINT32		RSSI2;
-	UINT32		SNR0;
-	UINT32		SNR1;
-	// control
-	//UINT32		Repeat; // Tx Cpu count
-	UCHAR		TxStatus; // task Tx status // 0 --> task is idle, 1 --> task is running
-#endif // RALINK_28xx_QA //
-}	ATE_INFO, *PATE_INFO;
-
-#ifdef RALINK_28xx_QA
-struct ate_racfghdr {
- 	UINT32		magic_no;
-	USHORT		command_type;
-	USHORT		command_id;
-	USHORT		length;
-	USHORT		sequence;
-	USHORT		status;
-	UCHAR		data[2046];
-}  __attribute__((packed));
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
-#ifdef DOT11_N_SUPPORT
 struct reordering_mpdu
 {
 	struct reordering_mpdu	*next;
@@ -287,7 +287,6 @@ struct reordering_mpdu_pool
 	NDIS_SPIN_LOCK			lock;
 	struct reordering_list 	freelist;
 };
-#endif // DOT11_N_SUPPORT //
 
 typedef struct 	_RSSI_SAMPLE {
 	CHAR			LastRssi0;             // last received RSSI
@@ -364,12 +363,14 @@ typedef struct  _QUEUE_HEADER   {
 #define RTMP_TEST_FLAG(_M, _F)      (((_M)->Flags & (_F)) != 0)
 #define RTMP_TEST_FLAGS(_M, _F)     (((_M)->Flags & (_F)) == (_F))
 
+#ifdef RT2860
 // Macro for power save flag.
 #define RTMP_SET_PSFLAG(_M, _F)       ((_M)->PSFlags |= (_F))
 #define RTMP_CLEAR_PSFLAG(_M, _F)     ((_M)->PSFlags &= ~(_F))
 #define RTMP_CLEAR_PSFLAGS(_M)        ((_M)->PSFlags = 0)
 #define RTMP_TEST_PSFLAG(_M, _F)      (((_M)->PSFlags & (_F)) != 0)
 #define RTMP_TEST_PSFLAGS(_M, _F)     (((_M)->PSFlags & (_F)) == (_F))
+#endif
 
 #define OPSTATUS_SET_FLAG(_pAd, _F)     ((_pAd)->CommonCfg.OpStatusFlags |= (_F))
 #define OPSTATUS_CLEAR_FLAG(_pAd, _F)   ((_pAd)->CommonCfg.OpStatusFlags &= ~(_F))
@@ -383,14 +384,12 @@ typedef struct  _QUEUE_HEADER   {
 #define RX_FILTER_CLEAR_FLAG(_pAd, _F)  ((_pAd)->CommonCfg.PacketFilter &= ~(_F))
 #define RX_FILTER_TEST_FLAG(_pAd, _F)   (((_pAd)->CommonCfg.PacketFilter & (_F)) != 0)
 
-#ifdef CONFIG_STA_SUPPORT
 #define STA_NO_SECURITY_ON(_p)          (_p->StaCfg.WepStatus == Ndis802_11EncryptionDisabled)
 #define STA_WEP_ON(_p)                  (_p->StaCfg.WepStatus == Ndis802_11Encryption1Enabled)
 #define STA_TKIP_ON(_p)                 (_p->StaCfg.WepStatus == Ndis802_11Encryption2Enabled)
 #define STA_AES_ON(_p)                  (_p->StaCfg.WepStatus == Ndis802_11Encryption3Enabled)
 
 #define STA_TGN_WIFI_ON(_p)             (_p->StaCfg.bTGnWifiTest == TRUE)
-#endif // CONFIG_STA_SUPPORT //
 
 #define CKIP_KP_ON(_p)				((((_p)->StaCfg.CkipFlag) & 0x10) && ((_p)->StaCfg.bCkipCmicOn == TRUE))
 #define CKIP_CMIC_ON(_p)			((((_p)->StaCfg.CkipFlag) & 0x08) && ((_p)->StaCfg.bCkipCmicOn == TRUE))
@@ -401,7 +400,17 @@ typedef struct  _QUEUE_HEADER   {
     (_idx) = (_idx+1) % (_RingSize);       \
 }
 
+#ifdef RT30xx
+// We will have a cost down version which mac version is 0x3090xxxx
+#define IS_RT3090(_pAd)				((((_pAd)->MACVersion & 0xffff0000) == 0x30710000) || (((_pAd)->MACVersion & 0xffff0000) == 0x30900000))
+#endif
 #define IS_RT3070(_pAd)				(((_pAd)->MACVersion & 0xffff0000) == 0x30700000)
+#ifdef RT30xx
+#define IS_RT3071(_pAd)				(((_pAd)->MACVersion & 0xffff0000) == 0x30710000)
+#define IS_RT2070(_pAd)				(((_pAd)->RfIcType == RFIC_2020) || ((_pAd)->EFuseTag == 0x27))
+
+#define IS_RT30xx(_pAd)				(((_pAd)->MACVersion & 0xfff00000) == 0x30700000)
+#endif
 
 #define RING_PACKET_INIT(_TxRing, _idx)    \
 {                                          \
@@ -437,7 +446,6 @@ typedef struct  _QUEUE_HEADER   {
     }                                                   \
 }
 
-#ifdef DOT11_N_SUPPORT
 // StaActive.SupportedHtPhy.MCSSet is copied from AP beacon.  Don't need to update here.
 #define COPY_HTSETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(_pAd)                                 \
 {                                                                                       \
@@ -461,7 +469,6 @@ typedef struct  _QUEUE_HEADER   {
 	_pAd->MacTab.Content[BSSID_WCID].MmpsMode= (UCHAR)(_pHtCapability->HtCapInfo.MimoPs);	\
 	_pAd->MacTab.Content[BSSID_WCID].MaxRAmpduFactor = (UCHAR)(_pHtCapability->HtCapParm.MaxRAmpduFactor);	\
 }
-#endif // DOT11_N_SUPPORT //
 
 //
 // MACRO for 32-bit PCI register read / write
@@ -483,6 +490,7 @@ typedef struct  _QUEUE_HEADER   {
 //
 #define MAX_BUSY_COUNT  100         // Number of retry before failing access BBP & RF indirect register
 //
+#ifdef RT2860
 #define RTMP_RF_IO_WRITE32(_A, _V)                  \
 {                                                   \
     PHY_CSR4_STRUC  Value;                          \
@@ -646,7 +654,20 @@ typedef struct  _QUEUE_HEADER   {
     }                                                   \
     }                                                   \
 }
+#endif /* RT2860 */
+#ifdef RT2870
+#define RTMP_RF_IO_WRITE32(_A, _V)                 RTUSBWriteRFRegister(_A, _V)
+#define RTMP_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV)   RTUSBReadBBPRegister(_A, _I, _pV)
+#define RTMP_BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V)   RTUSBWriteBBPRegister(_A, _I, _V)
 
+#define BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V)			RTUSBWriteBBPRegister(_A, _I, _V)
+#define BBP_IO_READ8_BY_REG_ID(_A, _I, _pV)   		RTUSBReadBBPRegister(_A, _I, _pV)
+#endif // RT2870 //
+
+#ifdef RT30xx
+#define RTMP_RF_IO_READ8_BY_REG_ID(_A, _I, _pV)    RT30xxReadRFRegister(_A, _I, _pV)
+#define RTMP_RF_IO_WRITE8_BY_REG_ID(_A, _I, _V)    RT30xxWriteRFRegister(_A, _I, _V)
+#endif // RT30xx //
 
 #define     MAP_CHANNEL_ID_TO_KHZ(ch, khz)  {               \
                 switch (ch)                                 \
@@ -897,6 +918,7 @@ typedef struct _RTMP_SCATTER_GATHER_LIST {
 // Enqueue this frame to MLME engine
 // We need to enqueue the whole frame because MLME need to pass data type
 // information from 802.11 header
+#ifdef RT2860
 #define REPORT_MGMT_FRAME_TO_MLME(_pAd, Wcid, _pFrame, _FrameSize, _Rssi0, _Rssi1, _Rssi2, _PlcpSignal)        \
 {                                                                                       \
     UINT32 High32TSF, Low32TSF;                                                          \
@@ -904,6 +926,49 @@ typedef struct _RTMP_SCATTER_GATHER_LIST {
     RTMP_IO_READ32(_pAd, TSF_TIMER_DW0, &Low32TSF);                                        \
     MlmeEnqueueForRecv(_pAd, Wcid, High32TSF, Low32TSF, (UCHAR)_Rssi0, (UCHAR)_Rssi1,(UCHAR)_Rssi2,_FrameSize, _pFrame, (UCHAR)_PlcpSignal);   \
 }
+#endif
+#ifdef RT2870
+#define REPORT_MGMT_FRAME_TO_MLME(_pAd, Wcid, _pFrame, _FrameSize, _Rssi0, _Rssi1, _Rssi2, _PlcpSignal)        \
+{                                                                                       \
+    UINT32 High32TSF=0, Low32TSF=0;                                                          \
+    MlmeEnqueueForRecv(_pAd, Wcid, High32TSF, Low32TSF, (UCHAR)_Rssi0, (UCHAR)_Rssi1,(UCHAR)_Rssi2,_FrameSize, _pFrame, (UCHAR)_PlcpSignal);   \
+}
+#endif // RT2870 //
+
+#ifdef RT30xx
+//Need to collect each ant's rssi concurrently
+//rssi1 is report to pair2 Ant and rss2 is reprot to pair1 Ant when 4 Ant
+#define COLLECT_RX_ANTENNA_AVERAGE_RSSI(_pAd, _rssi1, _rssi2)					\
+{																				\
+	SHORT	AvgRssi;															\
+	UCHAR	UsedAnt;															\
+	if (_pAd->RxAnt.EvaluatePeriod == 0)									\
+	{																		\
+		UsedAnt = _pAd->RxAnt.Pair1PrimaryRxAnt;							\
+		AvgRssi = _pAd->RxAnt.Pair1AvgRssi[UsedAnt];						\
+		if (AvgRssi < 0)													\
+			AvgRssi = AvgRssi - (AvgRssi >> 3) + _rssi1;					\
+		else																\
+			AvgRssi = _rssi1 << 3;											\
+		_pAd->RxAnt.Pair1AvgRssi[UsedAnt] = AvgRssi;						\
+	}																		\
+	else																	\
+	{																		\
+		UsedAnt = _pAd->RxAnt.Pair1SecondaryRxAnt;							\
+		AvgRssi = _pAd->RxAnt.Pair1AvgRssi[UsedAnt];						\
+		if ((AvgRssi < 0) && (_pAd->RxAnt.FirstPktArrivedWhenEvaluate))		\
+			AvgRssi = AvgRssi - (AvgRssi >> 3) + _rssi1;					\
+		else																\
+		{																	\
+			_pAd->RxAnt.FirstPktArrivedWhenEvaluate = TRUE;					\
+			AvgRssi = _rssi1 << 3;											\
+		}																	\
+		_pAd->RxAnt.Pair1AvgRssi[UsedAnt] = AvgRssi;						\
+		_pAd->RxAnt.RcvPktNumWhenEvaluate++;								\
+	}																		\
+}
+#endif // RT30xx //
+
 
 #define NDIS_QUERY_BUFFER(_NdisBuf, _ppVA, _pBufLen)                    \
     NdisQueryBuffer(_NdisBuf, _ppVA, _pBufLen)
@@ -916,7 +981,7 @@ typedef struct _RTMP_SCATTER_GATHER_LIST {
 //
 #define JapanChannelCheck(channel)  ((channel == 52) || (channel == 56) || (channel == 60) || (channel == 64))
 
-#ifdef CONFIG_STA_SUPPORT
+#ifdef RT2860
 #define STA_PORT_SECURED(_pAd) \
 { \
 	_pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; \
@@ -925,8 +990,16 @@ typedef struct _RTMP_SCATTER_GATHER_LIST {
 	_pAd->MacTab.Content[BSSID_WCID].PortSecured = _pAd->StaCfg.PortSecured; \
 	NdisReleaseSpinLock(&(_pAd)->MacTabLock); \
 }
-#endif // CONFIG_STA_SUPPORT //
-
+#endif
+#ifdef RT2870
+#define STA_PORT_SECURED(_pAd) \
+{ \
+	_pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; \
+	NdisAcquireSpinLock(&_pAd->MacTabLock); \
+	_pAd->MacTab.Content[BSSID_WCID].PortSecured = _pAd->StaCfg.PortSecured; \
+	NdisReleaseSpinLock(&_pAd->MacTabLock); \
+}
+#endif
 
 //
 // Register set pair for initialzation register set definition
@@ -975,17 +1048,10 @@ typedef struct  _RTMP_DMABUF
 
 
 typedef	union	_HEADER_802_11_SEQ{
-#ifdef RT_BIG_ENDIAN
-    struct {
-   	USHORT			Sequence:12;
-	USHORT			Frag:4;
-    }   field;
-#else
     struct {
 	USHORT			Frag:4;
 	USHORT			Sequence:12;
     }   field;
-#endif
     USHORT           value;
 }	HEADER_802_11_SEQ, *PHEADER_802_11_SEQ;
 
@@ -1002,7 +1068,12 @@ typedef struct  _RTMP_REORDERBUF
 	UCHAR 		DataOffset;
 	USHORT 		Datasize;
 	ULONG                   AllocSize;
+#ifdef RT2860
 	NDIS_PHYSICAL_ADDRESS   AllocPa;            // TxBuf physical address
+#endif
+#ifdef RT2870
+	PUCHAR					AllocPa;
+#endif // RT2870 //
 }   RTMP_REORDERBUF, *PRTMP_REORDERBUF;
 
 //
@@ -1101,7 +1172,9 @@ typedef struct _COUNTER_802_11 {
 
 typedef struct _COUNTER_RALINK {
 	ULONG           TransmittedByteCount;   // both successful and failure, used to calculate TX throughput
+#ifdef RT2860
 	ULONG           LastReceivedByteCount;
+#endif
 	ULONG           ReceivedByteCount;      // both CRC okay and CRC error, used to calculate RX throughput
 	ULONG           BeenDisassociatedCount;
 	ULONG           BadCQIAutoRecoveryCount;
@@ -1124,6 +1197,9 @@ typedef struct _COUNTER_RALINK {
 
 	UINT32   		OneSecFrameDuplicateCount;
 
+#ifdef RT2870
+	ULONG           OneSecTransmittedByteCount;   // both successful and failure, used to calculate TX throughput
+#endif // RT2870 //
 
 	UINT32          OneSecTxNoRetryOkCount;
 	UINT32          OneSecTxRetryOkCount;
@@ -1197,15 +1273,6 @@ typedef struct  _ARCFOUR
 
 // MIMO Tx parameter, ShortGI, MCS, STBC, etc.  these are fields in TXWI too. just copy to TXWI.
 typedef struct  _RECEIVE_SETTING {
-#ifdef RT_BIG_ENDIAN
-	USHORT		MIMO:1;
-	USHORT		OFDM:1;
-	USHORT		rsv:3;
-	USHORT		STBC:2;	//SPACE
-	USHORT		ShortGI:1;
-	USHORT		Mode:2;	//channel bandwidth 20MHz or 40 MHz
-	USHORT   	NumOfRX:2;                 // MIMO. WE HAVE 3R
-#else
 	USHORT   	NumOfRX:2;                 // MIMO. WE HAVE 3R
 	USHORT		Mode:2;	//channel bandwidth 20MHz or 40 MHz
 	USHORT		ShortGI:1;
@@ -1213,7 +1280,6 @@ typedef struct  _RECEIVE_SETTING {
 	USHORT		rsv:3;
 	USHORT		OFDM:1;
 	USHORT		MIMO:1;
-#endif
  } RECEIVE_SETTING, *PRECEIVE_SETTING;
 
 // Shared key data structure
@@ -1230,9 +1296,7 @@ typedef struct _CIPHER_KEY {
 	UCHAR   RxTsc[6];           // 48bit TSC value
 	UCHAR   CipherAlg;          // 0-none, 1:WEP64, 2:WEP128, 3:TKIP, 4:AES, 5:CKIP64, 6:CKIP128
 	UCHAR   KeyLen;
-#ifdef CONFIG_STA_SUPPORT
 	UCHAR   BssId[6];
-#endif // CONFIG_STA_SUPPORT //
             // Key length for each key, 0: entry is invalid
 	UCHAR   Type;               // Indicate Pairwise/Group when reporting MIC error
 } CIPHER_KEY, *PCIPHER_KEY;
@@ -1248,6 +1312,9 @@ typedef struct _BBP_TUNING_STRUCT {
 
 typedef struct _SOFT_RX_ANT_DIVERSITY_STRUCT {
 	UCHAR     EvaluatePeriod;		 // 0:not evalute status, 1: evaluate status, 2: switching status
+#ifdef RT30xx
+	UCHAR     EvaluateStableCnt;
+#endif
 	UCHAR     Pair1PrimaryRxAnt;     // 0:Ant-E1, 1:Ant-E2
 	UCHAR     Pair1SecondaryRxAnt;   // 0:Ant-E1, 1:Ant-E2
 	UCHAR     Pair2PrimaryRxAnt;     // 0:Ant-E3, 1:Ant-E4
@@ -1368,9 +1435,6 @@ typedef struct _BBP_R66_TUNING {
 typedef struct _CHANNEL_TX_POWER {
 	USHORT     RemainingTimeForUse;		//unit: sec
 	UCHAR      Channel;
-#ifdef DOT11N_DRAFT3
-	BOOLEAN       bEffectedChannel;	// For BW 40 operating in 2.4GHz , the "effected channel" is the channel that is covered in 40Mhz.
-#endif // DOT11N_DRAFT3 //
 	CHAR       Power;
 	CHAR       Power2;
 	UCHAR      MaxTxPwr;
@@ -1393,7 +1457,6 @@ typedef enum _ABGBAND_STATE_ {
 } ABGBAND_STATE;
 
 typedef struct _MLME_STRUCT {
-#ifdef CONFIG_STA_SUPPORT
 	// STA state machines
 	STATE_MACHINE           CntlMachine;
 	STATE_MACHINE           AssocMachine;
@@ -1409,20 +1472,10 @@ typedef struct _MLME_STRUCT {
 	STATE_MACHINE_FUNC      SyncFunc[SYNC_FUNC_SIZE];
 	STATE_MACHINE_FUNC      WpaPskFunc[WPA_PSK_FUNC_SIZE];
 	STATE_MACHINE_FUNC      AironetFunc[AIRONET_FUNC_SIZE];
-#endif // CONFIG_STA_SUPPORT //
 	STATE_MACHINE_FUNC      ActFunc[ACT_FUNC_SIZE];
 	// Action
 	STATE_MACHINE           ActMachine;
 
-
-#ifdef QOS_DLS_SUPPORT
-	STATE_MACHINE			DlsMachine;
-	STATE_MACHINE_FUNC      DlsFunc[DLS_FUNC_SIZE];
-#endif // QOS_DLS_SUPPORT //
-
-
-
-
 	ULONG                   ChannelQuality;  // 0..100, Channel Quality Indication for Roaming
 	ULONG                   Now32;           // latch the value of NdisGetSystemUpTime()
 	ULONG                   LastSendNULLpsmTime;
@@ -1437,9 +1490,11 @@ typedef struct _MLME_STRUCT {
 	RALINK_TIMER_STRUCT     APSDPeriodicTimer;
 	RALINK_TIMER_STRUCT     LinkDownTimer;
 	RALINK_TIMER_STRUCT     LinkUpTimer;
+#ifdef RT2860
     UCHAR                   bPsPollTimerRunning;
     RALINK_TIMER_STRUCT     PsPollTimer;
 	RALINK_TIMER_STRUCT     RadioOnOffTimer;
+#endif
 	ULONG                   PeriodicRound;
 	ULONG                   OneSecPeriodicRound;
 
@@ -1448,7 +1503,10 @@ typedef struct _MLME_STRUCT {
 	BOOLEAN					bEnableAutoAntennaCheck;
 	RALINK_TIMER_STRUCT		RxAntEvalTimer;
 
-
+#ifdef RT2870
+	UCHAR CaliBW40RfR24;
+	UCHAR CaliBW20RfR24;
+#endif // RT2870 //
 } MLME_STRUCT, *PMLME_STRUCT;
 
 // structure for radar detection and channel switch
@@ -1471,23 +1529,6 @@ typedef struct _RADAR_DETECT_STRUCT {
 	UINT8		LongPulseRadarTh;
 } RADAR_DETECT_STRUCT, *PRADAR_DETECT_STRUCT;
 
-#ifdef CARRIER_DETECTION_SUPPORT
-typedef enum CD_STATE_n
-{
-	CD_NORMAL,
-	CD_SILENCE,
-	CD_MAX_STATE
-} CD_STATE;
-
-typedef struct CARRIER_DETECTION_s
-{
-	BOOLEAN					Enable;
-	UINT8					CDSessionTime;
-	UINT8					CDPeriod;
-	CD_STATE				CD_State;
-} CARRIER_DETECTION, *PCARRIER_DETECTION;
-#endif // CARRIER_DETECTION_SUPPORT //
-
 typedef enum _REC_BLOCKACK_STATUS
 {
     Recipient_NONE=0,
@@ -1504,7 +1545,6 @@ typedef enum _ORI_BLOCKACK_STATUS
     Originator_Done
 } ORI_BLOCKACK_STATUS, *PORI_BLOCKACK_STATUS;
 
-#ifdef DOT11_N_SUPPORT
 typedef struct _BA_ORI_ENTRY{
 	UCHAR   Wcid;
 	UCHAR   TID;
@@ -1568,21 +1608,6 @@ typedef struct _QUERYBA_TABLE{
 } QUERYBA_TABLE, *PQUERYBA_TABLE;
 
 typedef	union	_BACAP_STRUC	{
-#ifdef RT_BIG_ENDIAN
-	struct	{
-		UINT32     :4;
-		UINT32     b2040CoexistScanSup:1;		//As Sta, support do 2040 coexistence scan for AP. As Ap, support monitor trigger event to check if can use BW 40MHz.
-		UINT32     bHtAdhoc:1;			// adhoc can use ht rate.
-		UINT32     MMPSmode:2;	// MIMO power save more, 0:static, 1:dynamic, 2:rsv, 3:mimo enable
-		UINT32     AmsduSize:1;	// 0:3839, 1:7935 bytes. UINT  MSDUSizeToBytes[]	= { 3839, 7935};
-		UINT32     AmsduEnable:1;	//Enable AMSDU transmisstion
-		UINT32		MpduDensity:3;
-		UINT32		Policy:2;	// 0: DELAY_BA 1:IMMED_BA  (//BA Policy subfiled value in ADDBA frame)   2:BA-not use
-		UINT32		AutoBA:1;	// automatically BA
-		UINT32		TxBAWinLimit:8;
-		UINT32		RxBAWinLimit:8;
-	}	field;
-#else
 	struct	{
 		UINT32		RxBAWinLimit:8;
 		UINT32		TxBAWinLimit:8;
@@ -1596,10 +1621,8 @@ typedef	union	_BACAP_STRUC	{
 		UINT32       	b2040CoexistScanSup:1;		//As Sta, support do 2040 coexistence scan for AP. As Ap, support monitor trigger event to check if can use BW 40MHz.
 		UINT32       	:4;
 	}	field;
-#endif
 	UINT32			word;
 } BACAP_STRUC, *PBACAP_STRUC;
-#endif // DOT11_N_SUPPORT //
 
 //This structure is for all 802.11n card InterOptibilityTest action. Reset all Num every n second.  (Details see MLMEPeriodic)
 typedef	struct	_IOT_STRUC	{
@@ -1614,30 +1637,15 @@ typedef	struct	_IOT_STRUC	{
 	UCHAR			RTSShortProt;
 	UCHAR			RTSLongProt;
 	BOOLEAN			bRTSLongProtOn;
-#ifdef CONFIG_STA_SUPPORT
 	BOOLEAN			bLastAtheros;
     BOOLEAN			bCurrentAtheros;
     BOOLEAN         bNowAtherosBurstOn;
 	BOOLEAN			bNextDisableRxBA;
     BOOLEAN			bToggle;
-#endif // CONFIG_STA_SUPPORT //
 } IOT_STRUC, *PIOT_STRUC;
 
 // This is the registry setting for 802.11n transmit setting.  Used in advanced page.
 typedef union _REG_TRANSMIT_SETTING {
-#ifdef RT_BIG_ENDIAN
- struct {
-         UINT32  rsv:13;
-		 UINT32  EXTCHA:2;
-		 UINT32  HTMODE:1;
-		 UINT32  TRANSNO:2;
-		 UINT32  STBC:1; //SPACE
-		 UINT32  ShortGI:1;
-		 UINT32  BW:1; //channel bandwidth 20MHz or 40 MHz
-		 UINT32  TxBF:1; // 3*3
-		 UINT32  rsv0:10;
-    } field;
-#else
  struct {
 		 UINT32  rsv0:10;
 		 UINT32  TxBF:1;
@@ -1649,26 +1657,16 @@ typedef union _REG_TRANSMIT_SETTING {
          UINT32  EXTCHA:2;
          UINT32  rsv:13;
     } field;
-#endif
  UINT32   word;
 } REG_TRANSMIT_SETTING, *PREG_TRANSMIT_SETTING;
 
 typedef union  _DESIRED_TRANSMIT_SETTING {
-#ifdef RT_BIG_ENDIAN
-	struct	{
-			USHORT		rsv:3;
-			USHORT		FixedTxMode:2;			// If MCS isn't AUTO, fix rate in CCK, OFDM or HT mode.
-			USHORT		PhyMode:4;
-			USHORT   	MCS:7;                 // MCS
-	}	field;
-#else
 	struct	{
 			USHORT   	MCS:7;                 	// MCS
 			USHORT		PhyMode:4;
 			USHORT	 	FixedTxMode:2;			// If MCS isn't AUTO, fix rate in CCK, OFDM or HT mode.
 			USHORT		rsv:3;
 	}	field;
-#endif
 	USHORT		word;
  } DESIRED_TRANSMIT_SETTING, *PDESIRED_TRANSMIT_SETTING;
 
@@ -1707,6 +1705,19 @@ typedef struct {
 		UCHAR bit_offset = wcid & 0x7; \
 		ad_p->ApCfg.MBSSID[apidx].TimBitmaps[tim_offset] |= BIT8[bit_offset]; }
 
+#ifdef RT2870
+#define BEACON_BITMAP_MASK		0xff
+typedef struct _BEACON_SYNC_STRUCT_
+{
+	UCHAR        			BeaconBuf[HW_BEACON_MAX_COUNT][HW_BEACON_OFFSET];
+	UCHAR					BeaconTxWI[HW_BEACON_MAX_COUNT][TXWI_SIZE];
+	ULONG 					TimIELocationInBeacon[HW_BEACON_MAX_COUNT];
+	ULONG					CapabilityInfoLocationInBeacon[HW_BEACON_MAX_COUNT];
+	BOOLEAN					EnableBeacon;		// trigger to enable beacon transmission.
+	UCHAR					BeaconBitMap;		// NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change.
+	UCHAR					DtimBitOn;			// NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change.
+}BEACON_SYNC_STRUCT;
+#endif // RT2870 //
 
 typedef struct _MULTISSID_STRUCT {
 	UCHAR								Bssid[MAC_ADDR_LEN];
@@ -1813,17 +1824,6 @@ typedef struct _MULTISSID_STRUCT {
 	UCHAR					BcnBufIdx;
 } MULTISSID_STRUCT, *PMULTISSID_STRUCT;
 
-
-
-#ifdef DOT11N_DRAFT3
-typedef enum _BSS2040COEXIST_FLAG{
-	BSS_2040_COEXIST_DISABLE = 0,
-	BSS_2040_COEXIST_TIMER_FIRED  = 1,
-	BSS_2040_COEXIST_INFO_SYNC = 2,
-	BSS_2040_COEXIST_INFO_NOTIFY = 4,
-}BSS2040COEXIST_FLAG;
-#endif // DOT11N_DRAFT3 //
-
 // configuration common to OPMODE_AP as well as OPMODE_STA
 typedef struct _COMMON_CONFIG {
 
@@ -1886,10 +1886,9 @@ typedef struct _COMMON_CONFIG {
 	ULONG       TxPowerPercentage;      // 0~100 %
 	ULONG       TxPowerDefault;         // keep for TxPowerPercentage
 
-#ifdef DOT11_N_SUPPORT
 	BACAP_STRUC        BACapability; //   NO USE = 0XFF  ;  IMMED_BA =1  ;  DELAY_BA=0
 	BACAP_STRUC        REGBACapability; //   NO USE = 0XFF  ;  IMMED_BA =1  ;  DELAY_BA=0
-#endif // DOT11_N_SUPPORT //
+
 	IOT_STRUC		IOTestParm;	// 802.11n InterOpbility Test Parameter;
 	ULONG       TxPreamble;             // Rt802_11PreambleLong, Rt802_11PreambleShort, Rt802_11PreambleAuto
 	BOOLEAN     bUseZeroToDisableFragment;     // Microsoft use 0 as disable
@@ -1901,17 +1900,14 @@ typedef struct _COMMON_CONFIG {
 	BOOLEAN     bIEEE80211H;			// 1: enable IEEE802.11h spec.
 	ULONG		DisableOLBCDetect;		// 0: enable OLBC detect; 1 disable OLBC detect
 
-#ifdef DOT11_N_SUPPORT
 	BOOLEAN				bRdg;
-#endif // DOT11_N_SUPPORT //
+
 	BOOLEAN             bWmmCapable;        // 0:disable WMM, 1:enable WMM
 	QOS_CAPABILITY_PARM APQosCapability;    // QOS capability of the current associated AP
 	EDCA_PARM           APEdcaParm;         // EDCA parameters of the current associated AP
 	QBSS_LOAD_PARM      APQbssLoad;         // QBSS load of the current associated AP
 	UCHAR               AckPolicy[4];       // ACK policy of the specified AC. see ACK_xxx
-#ifdef CONFIG_STA_SUPPORT
 	BOOLEAN				bDLSCapable;		// 0:disable DLS, 1:enable DLS
-#endif // CONFIG_STA_SUPPORT //
 	// a bitmap of BOOLEAN flags. each bit represent an operation status of a particular
 	// BOOLEAN control, either ON or OFF. These flags should always be accessed via
 	// OPSTATUS_TEST_FLAG(), OPSTATUS_SET_FLAG(), OP_STATUS_CLEAR_FLAG() macros.
@@ -1920,15 +1916,13 @@ typedef struct _COMMON_CONFIG {
 
 	BOOLEAN				NdisRadioStateOff; //For HCT 12.0, set this flag to TRUE instead of called MlmeRadioOff.
 	ABGBAND_STATE		BandState;		// For setting BBP used on B/G or A mode.
+#ifdef RT30xx
+	BOOLEAN				bRxAntDiversity; // 0:disable, 1:enable Software Rx Antenna Diversity.
+#endif
 
 	// IEEE802.11H--DFS.
 	RADAR_DETECT_STRUCT	RadarDetect;
 
-#ifdef CARRIER_DETECTION_SUPPORT
-	CARRIER_DETECTION		CarrierDetect;
-#endif // CARRIER_DETECTION_SUPPORT //
-
-#ifdef DOT11_N_SUPPORT
 	// HT
 	UCHAR			BASize;		// USer desired BAWindowSize. Should not exceed our max capability
 	//RT_HT_CAPABILITY	SupportedHtPhy;
@@ -1939,33 +1933,6 @@ typedef struct _COMMON_CONFIG {
 	//This IE is included in channel switch ammouncement frames 7.4.1.5, beacons, probe Rsp.
 	NEW_EXT_CHAN_IE	NewExtChanOffset;	//7.3.2.20A, 1 if extension channel is above the control channel, 3 if below, 0 if not present
 
-#ifdef DOT11N_DRAFT3
-	UCHAR					Bss2040CoexistFlag;		// bit 0: bBssCoexistTimerRunning, bit 1: NeedSyncAddHtInfo.
-	RALINK_TIMER_STRUCT	Bss2040CoexistTimer;
-
-	//This IE is used for 20/40 BSS Coexistence.
-	BSS_2040_COEXIST_IE		BSS2040CoexistInfo;
-	// ====== 11n D3.0 =======================>
-	USHORT					Dot11OBssScanPassiveDwell;				// Unit : TU. 5~1000
-	USHORT					Dot11OBssScanActiveDwell;				// Unit : TU. 10~1000
-	USHORT					Dot11BssWidthTriggerScanInt;			// Unit : Second
-	USHORT					Dot11OBssScanPassiveTotalPerChannel;	// Unit : TU. 200~10000
-	USHORT					Dot11OBssScanActiveTotalPerChannel;	// Unit : TU. 20~10000
-	USHORT					Dot11BssWidthChanTranDelayFactor;
-	USHORT					Dot11OBssScanActivityThre;				// Unit : percentage
-
-	ULONG					Dot11BssWidthChanTranDelay;			// multiple of (Dot11BssWidthTriggerScanInt * Dot11BssWidthChanTranDelayFactor)
-	ULONG					CountDownCtr;	// CountDown Counter from (Dot11BssWidthTriggerScanInt * Dot11BssWidthChanTranDelayFactor)
-
-	NDIS_SPIN_LOCK          TriggerEventTabLock;
-	BSS_2040_COEXIST_IE		LastBSSCoexist2040;
-	BSS_2040_COEXIST_IE		BSSCoexist2040;
-	TRIGGER_EVENT_TAB		TriggerEventTab;
-	UCHAR					ChannelListIdx;
-	// <====== 11n D3.0 =======================
-	BOOLEAN					bOverlapScanning;
-#endif // DOT11N_DRAFT3 //
-
     BOOLEAN                 bHTProtect;
     BOOLEAN                 bMIMOPSEnable;
     BOOLEAN					bBADecline;
@@ -1976,7 +1943,6 @@ typedef struct _COMMON_CONFIG {
 	ULONG					LastRcvBSSWidthTriggerEventsTime;
 
 	UCHAR					TxBASize;
-#endif // DOT11_N_SUPPORT //
 
 	// Enable wireless event
 	BOOLEAN				bWirelessEvent;
@@ -1994,6 +1960,20 @@ typedef struct _COMMON_CONFIG {
 
 	BOOLEAN     		bHardwareRadio;     // Hardware controlled Radio enabled
 
+#ifdef RT2870
+	BOOLEAN     		bMultipleIRP;       // Multiple Bulk IN flag
+	UCHAR       		NumOfBulkInIRP;     // if bMultipleIRP == TRUE, NumOfBulkInIRP will be 4 otherwise be 1
+ 	RT_HT_CAPABILITY	SupportedHtPhy;
+	ULONG				MaxPktOneTxBulk;
+	UCHAR				TxBulkFactor;
+	UCHAR				RxBulkFactor;
+
+	BEACON_SYNC_STRUCT	*pBeaconSync;
+	RALINK_TIMER_STRUCT	BeaconUpdateTimer;
+	UINT32				BeaconAdjust;
+	UINT32				BeaconFactor;
+	UINT32				BeaconRemain;
+#endif // RT2870 //
 
 
  	NDIS_SPIN_LOCK			MeasureReqTabLock;
@@ -2006,16 +1986,8 @@ typedef struct _COMMON_CONFIG {
 #ifdef MCAST_RATE_SPECIFIC
 	HTTRANSMIT_SETTING		MCastPhyMode;
 #endif // MCAST_RATE_SPECIFIC //
-
-#ifdef SINGLE_SKU
-	UINT16					DefineMaxTxPwr;
-#endif // SINGLE_SKU //
-
-
 } COMMON_CONFIG, *PCOMMON_CONFIG;
 
-
-#ifdef CONFIG_STA_SUPPORT
 /* Modified by Wu Xi-Kun 4/21/2006 */
 // STA configuration and status
 typedef struct _STA_ADMIN_CONFIG {
@@ -2103,11 +2075,11 @@ typedef struct _STA_ADMIN_CONFIG {
 	BOOLEAN     bRadio;             // Radio state, And of Sw & Hw radio state
 	BOOLEAN     bHardwareRadio;     // Hardware controlled Radio enabled
 	BOOLEAN     bShowHiddenSSID;    // Show all known SSID in SSID list get operation
-
+#ifdef RT2860
     BOOLEAN		AdhocBOnlyJoined;	// Indicate Adhoc B Join.
     BOOLEAN		AdhocBGJoined;		// Indicate Adhoc B/G Join.
     BOOLEAN		Adhoc20NJoined;		// Indicate Adhoc 20MHz N Join.
-
+#endif
 	// New for WPA, windows want us to to keep association information and
 	// Fixed IEs from last association response
 	NDIS_802_11_ASSOCIATION_INFORMATION     AssocInfo;
@@ -2189,10 +2161,6 @@ typedef struct _STA_ADMIN_CONFIG {
 	UCHAR           	DtimCount;      // 0.. DtimPeriod-1
 	UCHAR           	DtimPeriod;     // default = 3
 
-#ifdef QOS_DLS_SUPPORT
-	RT_802_11_DLS		DLSEntry[MAX_NUM_OF_DLS_ENTRY];
-	UCHAR				DlsReplayCounter[8];
-#endif // QOS_DLS_SUPPORT //
 	////////////////////////////////////////////////////////////////////////////////////////
 	// This is only for WHQL test.
 	BOOLEAN				WhqlTest;
@@ -2203,7 +2171,6 @@ typedef struct _STA_ADMIN_CONFIG {
 	BOOLEAN		        bFastRoaming;       // 0:disable fast roaming, 1:enable fast roaming
 	CHAR		        dBmToRoam;          // the condition to roam when receiving Rssi less than this value. It's negative value.
 
-#ifdef WPA_SUPPLICANT_SUPPORT
     BOOLEAN             IEEE8021X;
     BOOLEAN             IEEE8021x_required_keys;
     CIPHER_KEY	        DesireSharedKey[4];	// Record user desired WEP keys
@@ -2214,7 +2181,6 @@ typedef struct _STA_ADMIN_CONFIG {
     // 2: driver takes care of scanning, AP selection, and IEEE 802.11 association parameters
     UCHAR               WpaSupplicantUP;
 	UCHAR				WpaSupplicantScanCount;
-#endif // WPA_SUPPLICANT_SUPPORT //
 
     CHAR                dev_name[16];
     USHORT              OriDevType;
@@ -2227,13 +2193,9 @@ typedef struct _STA_ADMIN_CONFIG {
 	RT_HT_PHY_INFO					DesiredHtPhyInfo;
 	BOOLEAN							bAutoTxRateSwitch;
 
+#ifdef RT2860
     UCHAR       BBPR3;
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-	UCHAR				IEEE80211dClientMode;
-	UCHAR				StaOriCountryCode[3];
-	UCHAR				StaOriGeography;
-#endif // EXT_BUILD_CHANNEL_LIST //
+#endif
 } STA_ADMIN_CONFIG, *PSTA_ADMIN_CONFIG;
 
 // This data structure keep the current active BSS/IBSS's configuration that this STA
@@ -2259,7 +2221,15 @@ typedef struct _STA_ACTIVE_CONFIG {
 	RT_HT_PHY_INFO		SupportedPhyInfo;
 	RT_HT_CAPABILITY	SupportedHtPhy;
 } STA_ACTIVE_CONFIG, *PSTA_ACTIVE_CONFIG;
-#endif // CONFIG_STA_SUPPORT //
+
+#ifdef RT2870
+// for USB interface, avoid in interrupt when write key
+typedef struct   RT_ADD_PAIRWISE_KEY_ENTRY {
+        NDIS_802_11_MAC_ADDRESS         MacAddr;
+        USHORT                          MacTabMatchWCID;        // ASIC
+        CIPHER_KEY                      CipherKey;
+} RT_ADD_PAIRWISE_KEY_ENTRY,*PRT_ADD_PAIRWISE_KEY_ENTRY;
+#endif // RT2870 //
 
 // ----------- start of AP --------------------------
 // AUTH-RSP State Machine Aux data structure
@@ -2325,14 +2295,11 @@ typedef struct _MAC_TABLE_ENTRY {
 
 	UINT32			StaConnectTime;		// the live time of this station since associated with AP
 
-
-#ifdef DOT11_N_SUPPORT
 	BOOLEAN			bSendBAR;
 	USHORT			NoBADataCountDown;
 
 	UINT32   		CachedBuf[16];		// UINT (4 bytes) for alignment
 	UINT			TxBFCount; // 3*3
-#endif // DOT11_N_SUPPORT //
 	UINT			FIFOCount;
 	UINT			DebugFIFOCount;
 	UINT			DebugTxCount;
@@ -2356,14 +2323,6 @@ typedef struct _MAC_TABLE_ENTRY {
 	UCHAR           TxRateUpPenalty;      // extra # of second penalty due to last unstable condition
 //====================================================
 
-
-
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-	UINT			MatchDlsEntryIdx; // indicate the index in pAd->StaCfg.DLSEntry
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
 	BOOLEAN         fNoisyEnvironment;
 	BOOLEAN			fLastSecAccordingRSSI;
 	UCHAR           LastSecTxRateChangeAction; // 0: no change, 1:rate UP, 2:rate down
@@ -2377,10 +2336,8 @@ typedef struct _MAC_TABLE_ENTRY {
 	// see fOP_STATUS_xxx in RTMP_DEF.C for detail bit definition. fCLIENT_STATUS_AMSDU_INUSED
 	ULONG           ClientStatusFlags;
 
-	// TODO: Shall we move that to DOT11_N_SUPPORT???
 	HTTRANSMIT_SETTING	HTPhyMode, MaxHTPhyMode, MinHTPhyMode;// For transmit phy setting in TXWI.
 
-#ifdef DOT11_N_SUPPORT
 	// HT EWC MIMO-N used parameters
 	USHORT		RXBAbitmap;	// fill to on-chip  RXWI_BA_BITMASK in 8.1.3RX attribute entry format
 	USHORT		TXBAbitmap;	// This bitmap as originator, only keep in software used to mark AMPDU bit in TXWI
@@ -2398,11 +2355,6 @@ typedef struct _MAC_TABLE_ENTRY {
 
 	HT_CAPABILITY_IE		HTCapability;
 
-#ifdef DOT11N_DRAFT3
-	UCHAR		BSS2040CoexistenceMgmtSupport;
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
-
 	BOOLEAN		bAutoTxRateSwitch;
 
 	UCHAR       RateLen;
@@ -2416,6 +2368,9 @@ typedef struct _MAC_TABLE_ENTRY {
 	UINT32			TXMCSSuccessful[16];
 	UINT32			TXMCSFailed[16];
 	UINT32			TXMCSAutoFallBack[16][16];
+#ifdef RT2870
+	ULONG   		LastBeaconRxTime;
+#endif
 } MAC_TABLE_ENTRY, *PMAC_TABLE_ENTRY;
 
 typedef struct _MAC_TABLE {
@@ -2427,16 +2382,16 @@ typedef struct _MAC_TABLE {
 	BOOLEAN         fAnyStationInPsm;
 	BOOLEAN         fAnyStationBadAtheros;	// Check if any Station is atheros 802.11n Chip.  We need to use RTS/CTS with Atheros 802,.11n chip.
 	BOOLEAN			fAnyTxOPForceDisable;	// Check if it is necessary to disable BE TxOP
-#ifdef DOT11_N_SUPPORT
+#ifdef RT2870
+	BOOLEAN			fAllStationAsRalink; 	// Check if all stations are ralink-chipset
+#endif
 	BOOLEAN         fAnyStationIsLegacy;	// Check if I use legacy rate to transmit to my BSS Station/
 	BOOLEAN         fAnyStationNonGF;		// Check if any Station can't support GF.
 	BOOLEAN         fAnyStation20Only;		// Check if any Station can't support GF.
 	BOOLEAN			fAnyStationMIMOPSDynamic; // Check if any Station is MIMO Dynamic
 	BOOLEAN         fAnyBASession;   // Check if there is BA session.  Force turn on RTS/CTS
-#endif // DOT11_N_SUPPORT //
 } MAC_TABLE, *PMAC_TABLE;
 
-#ifdef DOT11_N_SUPPORT
 #define IS_HT_STA(_pMacEntry)	\
 	(_pMacEntry->MaxHTPhyMode.field.MODE >= MODE_HTMIX)
 
@@ -2445,7 +2400,6 @@ typedef struct _MAC_TABLE {
 
 #define PEER_IS_HT_RATE(_pMacEntry)	\
 	(_pMacEntry->HTPhyMode.field.MODE >= MODE_HTMIX)
-#endif // DOT11_N_SUPPORT //
 
 typedef struct _WDS_ENTRY {
 	BOOLEAN         Valid;
@@ -2549,10 +2503,6 @@ typedef struct _APCLI_STRUCT {
 	UCHAR       	SNonce[32];         // SNonce for WPA-PSK
 	UCHAR			GNonce[32];			// GNonce for WPA-PSK from authenticator
 
-#ifdef WSC_AP_SUPPORT
-	WSC_CTRL	           WscControl;
-#endif // WSC_AP_SUPPORT //
-
 	HTTRANSMIT_SETTING				HTPhyMode, MaxHTPhyMode, MinHTPhyMode;
 	RT_HT_PHY_INFO					DesiredHtPhyInfo;
 	BOOLEAN							bAutoTxRateSwitch;
@@ -2561,14 +2511,6 @@ typedef struct _APCLI_STRUCT {
 
 // ----------- end of AP ----------------------------
 
-#ifdef BLOCK_NET_IF
-typedef struct _BLOCK_QUEUE_ENTRY
-{
-	BOOLEAN SwTxQueueBlockFlag;
-	LIST_HEADER NetIfList;
-} BLOCK_QUEUE_ENTRY, *PBLOCK_QUEUE_ENTRY;
-#endif // BLOCK_NET_IF //
-
 struct wificonf
 {
 	BOOLEAN	bShortGI;
@@ -2600,28 +2542,6 @@ typedef struct _INF_USB_CONFIG
 	};
 #endif // IKANOS_VX_1X0 //
 
-#ifdef NINTENDO_AP
-typedef struct _NINDO_CTRL_BLOCK {
-
-	RT_NINTENDO_TABLE	DS_TABLE;
-
-#ifdef CHIP25XX
-	spinlock_t			NINTENDO_TABLE_Lock;
-#else
-	NDIS_SPIN_LOCK		NINTENDO_TABLE_Lock;
-#endif // CHIP25XX //
-
-	UCHAR				NINTENDO_UP_BUFFER[512];
-	UCHAR				Local_KeyIdx;
-	CIPHER_KEY			Local_SharedKey;
-	UCHAR				Local_bHideSsid;
-	UCHAR				Local_AuthMode;
-	UCHAR				Local_WepStatus;
-	USHORT				Local_CapabilityInfo;
-} NINDO_CTRL_BLOCK;
-#endif // NINTENDO_AP //
-
-
 #ifdef DBG_DIAGNOSE
 #define DIAGNOSE_TIME	10   // 10 sec
 typedef struct _RtmpDiagStrcut_
@@ -2660,6 +2580,7 @@ typedef struct _RTMP_ADAPTER
 	PNET_DEV				net_dev;
 	ULONG					VirtualIfCnt;
 
+#ifdef RT2860
     USHORT		            LnkCtrlBitMask;
     USHORT		            RLnkCtrlConfiguration;
     USHORT                  RLnkCtrlOffset;
@@ -2686,11 +2607,51 @@ typedef struct _RTMP_ADAPTER
 	RTMP_DMABUF             RxDescRing;                 // Shared memory for RX descriptors
 	RTMP_DMABUF             TxDescRing[NUM_OF_TX_RING]; 	// Shared memory for Tx descriptors
 	RTMP_TX_RING            TxRing[NUM_OF_TX_RING];     	// AC0~4 + HCCA
-
+#endif
 
 	NDIS_SPIN_LOCK          irq_lock;
 	UCHAR                   irq_disabled;
 
+#ifdef RT2870
+/*****************************************************************************************/
+/*      USB related parameters                                                           */
+/*****************************************************************************************/
+	struct usb_config_descriptor		*config;
+	UINT								BulkInEpAddr;		// bulk-in endpoint address
+	UINT								BulkOutEpAddr[6];	// bulk-out endpoint address
+
+	UINT								NumberOfPipes;
+	USHORT								BulkOutMaxPacketSize;
+	USHORT								BulkInMaxPacketSize;
+
+	//======Control Flags
+	LONG                    	PendingIoCount;
+	ULONG						BulkFlags;
+	BOOLEAN                     bUsbTxBulkAggre;	// Flags for bulk out data priority
+
+
+	//======Timer Thread
+	RT2870_TIMER_QUEUE		TimerQ;
+	NDIS_SPIN_LOCK			TimerQLock;
+
+
+	//======Cmd Thread
+	CmdQ					CmdQ;
+	NDIS_SPIN_LOCK			CmdQLock;				// CmdQLock spinlock
+
+	BOOLEAN					TimerFunc_kill;
+	BOOLEAN					mlme_kill;
+
+
+	//======Semaphores (event)
+	struct semaphore			mlme_semaphore;			/* to sleep thread on	*/
+	struct semaphore			RTUSBCmd_semaphore;		/* to sleep thread on	*/
+	struct semaphore			RTUSBTimer_semaphore;
+	struct completion			TimerQComplete;
+	struct completion			mlmeComplete;
+	struct completion			CmdQComplete;
+	wait_queue_head_t			*wait;
+#endif // RT2870 //
 
 
 /*****************************************************************************************/
@@ -2704,6 +2665,22 @@ typedef struct _RTMP_ADAPTER
 	BOOLEAN                 DeQueueRunning[NUM_OF_TX_RING];  // for ensuring RTUSBDeQueuePacket get call once
 	NDIS_SPIN_LOCK          DeQueueLock[NUM_OF_TX_RING];
 
+#ifdef RT2870
+	// Data related context and AC specified, 4 AC supported
+	NDIS_SPIN_LOCK			BulkOutLock[6];			// BulkOut spinlock for 4 ACs
+	NDIS_SPIN_LOCK			MLMEBulkOutLock;	// MLME BulkOut lock
+
+	HT_TX_CONTEXT			TxContext[NUM_OF_TX_RING];
+	NDIS_SPIN_LOCK			TxContextQueueLock[NUM_OF_TX_RING];		// TxContextQueue spinlock
+
+	// 4 sets of Bulk Out index and pending flag
+	UCHAR					NextBulkOutIndex[4];	// only used for 4 EDCA bulkout pipe
+
+	BOOLEAN					BulkOutPending[6];	// used for total 6 bulkout pipe
+	UCHAR					bulkResetPipeid;
+	BOOLEAN					MgmtBulkPending;
+	ULONG					bulkResetReq[6];
+#endif // RT2870 //
 
 	// resource for software backlog queues
 	QUEUE_HEADER            TxSwQueue[NUM_OF_TX_RING];  // 4 AC + 1 HCCA
@@ -2717,10 +2694,20 @@ typedef struct _RTMP_ADAPTER
 /*****************************************************************************************/
 /*      Rx related parameters                                                           */
 /*****************************************************************************************/
-
+#ifdef RT2860
 	RTMP_RX_RING            RxRing;
 	NDIS_SPIN_LOCK          RxRingLock;                 // Rx Ring spinlock
-
+#endif
+#ifdef RT2870
+	RX_CONTEXT				RxContext[RX_RING_SIZE];  // 1 for redundant multiple IRP bulk in.
+	NDIS_SPIN_LOCK			BulkInLock;				// BulkIn spinlock for 4 ACs
+	UCHAR					PendingRx;				// The Maxima pending Rx value should be 	RX_RING_SIZE.
+	UCHAR					NextRxBulkInIndex;		// Indicate the current RxContext Index which hold by Host controller.
+	UCHAR					NextRxBulkInReadIndex;	// Indicate the current RxContext Index which driver can read & process it.
+	ULONG					NextRxBulkInPosition;   // Want to contatenate 2 URB buffer while 1st is bulkin failed URB. This Position is 1st URB TransferLength.
+	ULONG					TransferBufferLength;	// current length of the packet buffer
+	ULONG					ReadPosition;			// current read position in a packet buffer
+#endif // RT2870 //
 
 
 /*****************************************************************************************/
@@ -2734,6 +2721,10 @@ typedef struct _RTMP_ADAPTER
 	ULONG                   EepromVersion;          // byte 0: version, byte 1: revision, byte 2~3: unused
 	UCHAR                   EEPROMAddressNum;       // 93c46=6  93c66=8
 	USHORT                  EEPROMDefaultValue[NUM_EEPROM_BBP_PARMS];
+#ifdef RT30xx
+	BOOLEAN                 EepromAccess;
+	UCHAR                   EFuseTag;
+#endif
 	ULONG                   FirmwareVersion;        // byte 0: Minor version, byte 1: Major version, otherwise unused.
 
 	// ---------------------------
@@ -2826,11 +2817,19 @@ typedef struct _RTMP_ADAPTER
 	PSPOLL_FRAME            	PsPollFrame;
 	HEADER_802_11           	NullFrame;
 
+#ifdef RT2870
+	TX_CONTEXT				BeaconContext[BEACON_RING_SIZE];
+	TX_CONTEXT				NullContext;
+	TX_CONTEXT				PsPollContext;
+	TX_CONTEXT				RTSContext;
+#endif // RT2870 //
+
+
+
 //=========AP===========
 
 
 //=======STA===========
-#ifdef CONFIG_STA_SUPPORT
 /* Modified by Wu Xi-Kun 4/21/2006 */
 	// -----------------------------------------------
 	// STA specific configuration & operation status
@@ -2840,7 +2839,6 @@ typedef struct _RTMP_ADAPTER
 	STA_ACTIVE_CONFIG       StaActive;         // valid only when ADHOC_ON(pAd) || INFRA_ON(pAd)
 	CHAR                    nickname[IW_ESSID_MAX_SIZE+1]; // nickname, only used in the iwconfig i/f
 	NDIS_MEDIA_STATE        PreMediaState;
-#endif // CONFIG_STA_SUPPORT //
 
 //=======Common===========
 	// OP mode: either AP or STA
@@ -2848,7 +2846,6 @@ typedef struct _RTMP_ADAPTER
 
 	NDIS_MEDIA_STATE        IndicateMediaState;			// Base on Indication state, default is NdisMediaStateDisConnected
 
-	// MAT related parameters
 
 	// configuration: read from Registry & E2PROM
 	BOOLEAN                 bLocalAdminMAC;             // Use user changed MAC
@@ -2869,9 +2866,8 @@ typedef struct _RTMP_ADAPTER
 	MAC_TABLE                 MacTab;     // ASIC on-chip WCID entry table.  At TX, ASIC always use key according to this on-chip table.
 	NDIS_SPIN_LOCK          MacTabLock;
 
-#ifdef DOT11_N_SUPPORT
 	BA_TABLE			BATable;
-#endif // DOT11_N_SUPPORT //
+
 	NDIS_SPIN_LOCK          BATabLock;
 	RALINK_TIMER_STRUCT RECBATimer;
 
@@ -2890,16 +2886,13 @@ typedef struct _RTMP_ADAPTER
 
 	// flags, see fRTMP_ADAPTER_xxx flags
 	ULONG                   Flags;                      // Represent current device status
+#ifdef RT2860
 	ULONG                   PSFlags;                    // Power Save operation flag.
+#endif
 
 	// current TX sequence #
 	USHORT                  Sequence;
 
-#ifdef UNDER_CE
-	NDIS_HANDLE             hGiISR;
-#endif
-
-
 	// Control disconnect / connect event generation
 	//+++Didn't used anymore
 	ULONG                   LinkDownTime;
@@ -2928,6 +2921,14 @@ typedef struct _RTMP_ADAPTER
 	/*****************************************************************************************/
 	/*      Statistic related parameters                                                     */
 	/*****************************************************************************************/
+#ifdef RT2870
+	ULONG						BulkOutDataOneSecCount;
+	ULONG						BulkInDataOneSecCount;
+	ULONG						BulkLastOneSecCount; // BulkOutDataOneSecCount + BulkInDataOneSecCount
+	ULONG						watchDogRxCnt;
+	ULONG						watchDogRxOverFlowCnt;
+	ULONG						watchDogTxPendingCnt[NUM_OF_TX_RING];
+#endif // RT2870 //
 
 	BOOLEAN						bUpdateBcnCntDone;
 	ULONG						watchDogMacDeadlock;	// prevent MAC/BBP into deadlock condition
@@ -2967,13 +2968,7 @@ typedef struct _RTMP_ADAPTER
 
     struct wificonf			WIFItestbed;
 
-#ifdef RALINK_ATE
-	ATE_INFO				ate;
-#endif // RALINK_ATE //
-
-#ifdef DOT11_N_SUPPORT
 	struct reordering_mpdu_pool mpdu_blk_pool;
-#endif // DOT11_N_SUPPORT //
 
 	ULONG					OneSecondnonBEpackets;		// record non BE packets per second
 
@@ -2983,17 +2978,6 @@ typedef struct _RTMP_ADAPTER
 
 	struct net_device_stats	stats;
 
-#ifdef BLOCK_NET_IF
-	BLOCK_QUEUE_ENTRY		blockQueueTab[NUM_OF_TX_RING];
-#endif // BLOCK_NET_IF //
-
-
-
-#ifdef MULTIPLE_CARD_SUPPORT
-	INT32					MC_RowID;
-	UCHAR					MC_FileName[256];
-#endif // MULTIPLE_CARD_SUPPORT //
-
 	ULONG					TbttTickCount;
 #ifdef PCI_MSI_SUPPORT
 	BOOLEAN					HaveMsi;
@@ -3007,11 +2991,6 @@ typedef struct _RTMP_ADAPTER
 	UCHAR					flg_be_adjust;
 	ULONG					be_adjust_last_time;
 
-#ifdef NINTENDO_AP
-	NINDO_CTRL_BLOCK		nindo_ctrl_block;
-#endif // NINTENDO_AP //
-
-
 #ifdef IKANOS_VX_1X0
 	struct IKANOS_TX_INFO	IkanosTxInfo;
 	struct IKANOS_TX_INFO	IkanosRxInfo[MAX_MBSSID_NUM + MAX_WDS_ENTRY + MAX_APCLI_NUM + MAX_MESH_NUM];
@@ -3024,6 +3003,13 @@ typedef struct _RTMP_ADAPTER
 
 
 	UINT8					PM_FlgSuspend;
+
+#ifdef RT30xx
+//======efuse
+	BOOLEAN		bUseEfuse;
+	BOOLEAN		bEEPROMFile;
+#endif // RT30xx //
+
 } RTMP_ADAPTER, *PRTMP_ADAPTER;
 
 //
@@ -3176,7 +3162,7 @@ typedef struct _TX_BLK_
 
 //------------------------------------------------------------------------------------------
 
-
+#ifdef RT2860
 //
 // Enable & Disable NIC interrupt via writing interrupt mask register
 // Since it use ADAPTER structure, it have to be put after structure definition.
@@ -3210,243 +3196,6 @@ __inline    VOID    NICEnableInterrupt(
 	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE);
 }
 
-#ifdef RT_BIG_ENDIAN
-static inline VOID	WriteBackToDescriptor(
-	IN  PUCHAR			Dest,
- 	IN	PUCHAR			Src,
-    IN  BOOLEAN			DoEncrypt,
-	IN  ULONG           DescriptorType)
-{
-	UINT32 *p1, *p2;
-
-	p1 = ((UINT32 *)Dest);
-	p2 = ((UINT32 *)Src);
-
-	*p1 = *p2;
-	*(p1+2) = *(p2+2);
-	*(p1+3) = *(p2+3);
-	*(p1+1) = *(p2+1); // Word 1; this must be written back last
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Endian conversion of Tx/Rx descriptor .
-
-	Arguments:
-		pAd 	Pointer to our adapter
-		pData			Pointer to Tx/Rx descriptor
-		DescriptorType	Direction of the frame
-
-	Return Value:
-		None
-
-	Note:
-		Call this function when read or update descriptor
-	========================================================================
-*/
-static inline VOID	RTMPWIEndianChange(
-	IN	PUCHAR			pData,
-	IN	ULONG			DescriptorType)
-{
-	int size;
-	int i;
-
-	size = ((DescriptorType == TYPE_TXWI) ? TXWI_SIZE : RXWI_SIZE);
-
-	if(DescriptorType == TYPE_TXWI)
-	{
-		*((UINT32 *)(pData)) = SWAP32(*((UINT32 *)(pData)));		// Byte 0~3
-		*((UINT32 *)(pData + 4)) = SWAP32(*((UINT32 *)(pData+4)));	// Byte 4~7
-	}
-	else
-	{
-		for(i=0; i < size/4 ; i++)
-			*(((UINT32 *)pData) +i) = SWAP32(*(((UINT32 *)pData)+i));
-	}
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Endian conversion of Tx/Rx descriptor .
-
-	Arguments:
-		pAd 	Pointer to our adapter
-		pData			Pointer to Tx/Rx descriptor
-		DescriptorType	Direction of the frame
-
-	Return Value:
-		None
-
-	Note:
-		Call this function when read or update descriptor
-	========================================================================
-*/
-static inline VOID	RTMPDescriptorEndianChange(
-	IN	PUCHAR			pData,
-	IN	ULONG			DescriptorType)
-{
-	*((UINT32 *)(pData)) = SWAP32(*((UINT32 *)(pData)));		// Byte 0~3
-	*((UINT32 *)(pData + 8)) = SWAP32(*((UINT32 *)(pData+8)));	// Byte 8~11
-	*((UINT32 *)(pData +12)) = SWAP32(*((UINT32 *)(pData + 12)));	// Byte 12~15
-	*((UINT32 *)(pData + 4)) = SWAP32(*((UINT32 *)(pData + 4)));				// Byte 4~7, this must be swapped last
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Endian conversion of all kinds of 802.11 frames .
-
-	Arguments:
-		pAd 	Pointer to our adapter
-		pData			Pointer to the 802.11 frame structure
-		Dir 			Direction of the frame
-		FromRxDoneInt	Caller is from RxDone interrupt
-
-	Return Value:
-		None
-
-	Note:
-		Call this function when read or update buffer data
-	========================================================================
-*/
-static inline VOID	RTMPFrameEndianChange(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pData,
-	IN	ULONG			Dir,
-	IN	BOOLEAN 		FromRxDoneInt)
-{
-	PHEADER_802_11 pFrame;
-	PUCHAR	pMacHdr;
-
-	// swab 16 bit fields - Frame Control field
-	if(Dir == DIR_READ)
-	{
-		*(USHORT *)pData = SWAP16(*(USHORT *)pData);
-	}
-
-	pFrame = (PHEADER_802_11) pData;
-	pMacHdr = (PUCHAR) pFrame;
-
-	// swab 16 bit fields - Duration/ID field
-	*(USHORT *)(pMacHdr + 2) = SWAP16(*(USHORT *)(pMacHdr + 2));
-
-	// swab 16 bit fields - Sequence Control field
-	*(USHORT *)(pMacHdr + 22) = SWAP16(*(USHORT *)(pMacHdr + 22));
-
-	if(pFrame->FC.Type == BTYPE_MGMT)
-	{
-		switch(pFrame->FC.SubType)
-		{
-			case SUBTYPE_ASSOC_REQ:
-			case SUBTYPE_REASSOC_REQ:
-				// swab 16 bit fields - CapabilityInfo field
-				pMacHdr += sizeof(HEADER_802_11);
-				*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-
-				// swab 16 bit fields - Listen Interval field
-				pMacHdr += 2;
-				*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-				break;
-
-			case SUBTYPE_ASSOC_RSP:
-			case SUBTYPE_REASSOC_RSP:
-				// swab 16 bit fields - CapabilityInfo field
-				pMacHdr += sizeof(HEADER_802_11);
-				*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-
-				// swab 16 bit fields - Status Code field
-				pMacHdr += 2;
-				*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-
-				// swab 16 bit fields - AID field
-				pMacHdr += 2;
-				*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-				break;
-
-			case SUBTYPE_AUTH:
-				// If from APHandleRxDoneInterrupt routine, it is still a encrypt format.
-				// The convertion is delayed to RTMPHandleDecryptionDoneInterrupt.
-				if(!FromRxDoneInt && pFrame->FC.Wep == 1)
-					break;
-				else
-				{
-					// swab 16 bit fields - Auth Alg No. field
-					pMacHdr += sizeof(HEADER_802_11);
-					*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-
-					// swab 16 bit fields - Auth Seq No. field
-					pMacHdr += 2;
-					*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-
-					// swab 16 bit fields - Status Code field
-					pMacHdr += 2;
-					*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-				}
-				break;
-
-			case SUBTYPE_BEACON:
-			case SUBTYPE_PROBE_RSP:
-				// swab 16 bit fields - BeaconInterval field
-				pMacHdr += (sizeof(HEADER_802_11) + TIMESTAMP_LEN);
-				*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-
-				// swab 16 bit fields - CapabilityInfo field
-				pMacHdr += sizeof(USHORT);
-				*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-				break;
-
-			case SUBTYPE_DEAUTH:
-			case SUBTYPE_DISASSOC:
-				// swab 16 bit fields - Reason code field
-				pMacHdr += sizeof(HEADER_802_11);
-				*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-				break;
-		}
-	}
-	else if( pFrame->FC.Type == BTYPE_DATA )
-	{
-	}
-	else if(pFrame->FC.Type == BTYPE_CNTL)
-	{
-		switch(pFrame->FC.SubType)
-		{
-			case SUBTYPE_BLOCK_ACK_REQ:
-				{
-					PFRAME_BA_REQ pBAReq = (PFRAME_BA_REQ)pFrame;
-					*(USHORT *)(&pBAReq->BARControl) = SWAP16(*(USHORT *)(&pBAReq->BARControl));
-					pBAReq->BAStartingSeq.word = SWAP16(pBAReq->BAStartingSeq.word);
-				}
-				break;
-			case SUBTYPE_BLOCK_ACK:
-				// For Block Ack packet, the HT_CONTROL field is in the same offset with Addr3
-				*(UINT32 *)(&pFrame->Addr3[0]) = SWAP32(*(UINT32 *)(&pFrame->Addr3[0]));
-				break;
-
-			case SUBTYPE_ACK:
-				//For ACK packet, the HT_CONTROL field is in the same offset with Addr2
-				*(UINT32 *)(&pFrame->Addr2[0])=	SWAP32(*(UINT32 *)(&pFrame->Addr2[0]));
-				break;
-		}
-	}
-	else
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("Invalid Frame Type!!!\n"));
-	}
-
-	// swab 16 bit fields - Frame Control
-	if(Dir == DIR_WRITE)
-	{
-		*(USHORT *)pData = SWAP16(*(USHORT *)pData);
-	}
-}
-#endif // RT_BIG_ENDIAN //
-
-
 static inline VOID ConvertMulticastIP2MAC(
 	IN PUCHAR pIpAddr,
 	IN PUCHAR *ppMacAddr,
@@ -3484,6 +3233,7 @@ static inline VOID ConvertMulticastIP2MAC(
 
 	return;
 }
+#endif /* RT2860 */
 
 BOOLEAN RTMPCheckForHang(
 	IN  NDIS_HANDLE MiniportAdapterContext
@@ -3523,6 +3273,10 @@ NDIS_STATUS NICReadRegParameters(
 	IN  NDIS_HANDLE         WrapperConfigurationContext
 	);
 
+#ifdef RT2870
+VOID NICInitRT30xxRFRegisters(
+	IN PRTMP_ADAPTER pAd);
+#endif // RT2870 //
 
 VOID NICReadEEPROMParameters(
 	IN  PRTMP_ADAPTER       pAd,
@@ -3541,10 +3295,10 @@ NDIS_STATUS NICInitializeAdapter(
 NDIS_STATUS NICInitializeAsic(
 	IN  PRTMP_ADAPTER   pAd,
 	IN  BOOLEAN		bHardReset);
-
+#ifdef RT2860
 VOID NICRestoreBBPValue(
 	IN PRTMP_ADAPTER pAd);
-
+#endif
 VOID NICIssueReset(
 	IN  PRTMP_ADAPTER   pAd);
 
@@ -3691,7 +3445,6 @@ VOID MlmeQOSAction(
     IN PRTMP_ADAPTER pAd,
     IN MLME_QUEUE_ELEM *Elem);
 
-#ifdef DOT11_N_SUPPORT
 VOID PeerAddBAReqAction(
 	IN PRTMP_ADAPTER pAd,
 	IN MLME_QUEUE_ELEM *Elem);
@@ -3707,53 +3460,12 @@ VOID PeerDelBAAction(
 VOID PeerBAAction(
     IN PRTMP_ADAPTER pAd,
     IN MLME_QUEUE_ELEM *Elem);
-#endif // DOT11_N_SUPPORT //
 
 VOID SendPSMPAction(
 	IN PRTMP_ADAPTER	pAd,
 	IN UCHAR			Wcid,
 	IN UCHAR			Psmp);
 
-
-#ifdef DOT11N_DRAFT3
-VOID SendBSS2040CoexistMgmtAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR	Wcid,
-	IN	UCHAR	apidx,
-	IN	UCHAR	InfoReq);
-
-VOID SendNotifyBWActionFrame(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR  Wcid,
-	IN UCHAR apidx);
-
-BOOLEAN ChannelSwitchSanityCheck(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    UCHAR  Wcid,
-	IN    UCHAR  NewChannel,
-	IN    UCHAR  Secondary);
-
-VOID ChannelSwitchAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    UCHAR  Wcid,
-	IN    UCHAR  Channel,
-	IN    UCHAR  Secondary);
-
-ULONG BuildIntolerantChannelRep(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    PUCHAR  pDest);
-
-VOID Update2040CoexistFrameAndNotify(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    UCHAR  Wcid,
-	IN	BOOLEAN	bAddIntolerantCha);
-
-VOID Send2040CoexistAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    UCHAR  Wcid,
-	IN	BOOLEAN	bAddIntolerantCha);
-#endif // DOT11N_DRAFT3 //
-
 VOID PeerRMAction(
 	IN PRTMP_ADAPTER pAd,
 	IN MLME_QUEUE_ELEM *Elem);
@@ -3762,44 +3474,22 @@ VOID PeerPublicAction(
 	IN PRTMP_ADAPTER pAd,
 	IN MLME_QUEUE_ELEM *Elem);
 
-#ifdef CONFIG_STA_SUPPORT
 VOID StaPublicAction(
 	IN PRTMP_ADAPTER pAd,
 	IN UCHAR Bss2040Coexist);
-#endif // CONFIG_STA_SUPPORT //
-
 
 VOID PeerBSSTranAction(
 	IN PRTMP_ADAPTER pAd,
 	IN MLME_QUEUE_ELEM *Elem);
 
-#ifdef DOT11_N_SUPPORT
 VOID PeerHTAction(
 	IN PRTMP_ADAPTER pAd,
 	IN MLME_QUEUE_ELEM *Elem);
-#endif // DOT11_N_SUPPORT //
 
 VOID PeerQOSAction(
     IN PRTMP_ADAPTER pAd,
     IN MLME_QUEUE_ELEM *Elem);
 
-#ifdef QOS_DLS_SUPPORT
-VOID PeerDLSAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-#endif // QOS_DLS_SUPPORT //
-
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-VOID DlsParmFill(
-	IN PRTMP_ADAPTER pAd,
-	IN OUT MLME_DLS_REQ_STRUCT *pDlsReq,
-	IN PRT_802_11_DLS pDls,
-	IN USHORT reason);
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef DOT11_N_SUPPORT
 VOID RECBATimerTimeout(
     IN PVOID SystemSpecific1,
     IN PVOID FunctionContext,
@@ -3812,7 +3502,6 @@ VOID ORIBATimerTimeout(
 VOID SendRefreshBAR(
 	IN	PRTMP_ADAPTER	pAd,
 	IN	MAC_TABLE_ENTRY	*pEntry);
-#endif // DOT11_N_SUPPORT //
 
 VOID ActHeaderInit(
     IN	PRTMP_ADAPTER	pAd,
@@ -3845,7 +3534,6 @@ BOOLEAN QosBADataParse(
 	IN USHORT Datasize,
 	IN UINT   CurRxIndex);
 
-#ifdef DOT11_N_SUPPORT
 BOOLEAN CntlEnqueueForRecv(
     IN	PRTMP_ADAPTER	pAd,
 	IN ULONG Wcid,
@@ -3854,7 +3542,6 @@ BOOLEAN CntlEnqueueForRecv(
 
 VOID BaAutoManSwitch(
 	IN	PRTMP_ADAPTER	pAd);
-#endif // DOT11_N_SUPPORT //
 
 VOID HTIOTCheck(
 	IN	PRTMP_ADAPTER	pAd,
@@ -4010,7 +3697,13 @@ NDIS_STATUS MiniportMMRequest(
 	IN	UCHAR			QueIdx,
 	IN	PUCHAR			pData,
 	IN  UINT            Length);
-
+#ifdef RT2870
+NDIS_STATUS MiniportDataMMRequest(
+	 IN  PRTMP_ADAPTER   pAd,
+	 IN  UCHAR           QueIdx,
+	 IN  PUCHAR          pData,
+	 IN  UINT            Length);
+#endif
 VOID RTMPSendNullFrame(
 	IN  PRTMP_ADAPTER   pAd,
 	IN  UCHAR           TxRate,
@@ -4039,7 +3732,6 @@ PQUEUE_HEADER   RTMPCheckTxSwQueue(
 	IN  PRTMP_ADAPTER   pAd,
 	OUT UCHAR           *QueIdx);
 
-#ifdef CONFIG_STA_SUPPORT
 VOID RTMPReportMicError(
 	IN  PRTMP_ADAPTER   pAd,
 	IN  PCIPHER_KEY     pWpaKey);
@@ -4053,7 +3745,6 @@ VOID    WpaDisassocApAndBlockAssoc(
     IN  PVOID FunctionContext,
     IN  PVOID SystemSpecific2,
     IN  PVOID SystemSpecific3);
-#endif // CONFIG_STA_SUPPORT //
 
 NDIS_STATUS RTMPCloneNdisPacket(
 	IN  PRTMP_ADAPTER   pAd,
@@ -4193,7 +3884,6 @@ VOID AsicRfTuningExec(
 	IN PVOID SystemSpecific2,
 	IN PVOID SystemSpecific3);
 
-#ifdef CONFIG_STA_SUPPORT
 VOID AsicSleepThenAutoWakeup(
 	IN  PRTMP_ADAPTER   pAd,
 	IN  USHORT TbttNumToNextWakeUp);
@@ -4203,8 +3893,12 @@ VOID AsicForceSleep(
 
 VOID AsicForceWakeup(
 	IN PRTMP_ADAPTER pAd,
+#ifdef RT2860
 	IN UCHAR    	 Level);
-#endif // CONFIG_STA_SUPPORT //
+#endif
+#ifdef RT2870
+	IN BOOLEAN    bFromTx);
+#endif
 
 VOID AsicSetBssid(
 	IN  PRTMP_ADAPTER   pAd,
@@ -4298,11 +3992,11 @@ BOOLEAN AsicSendCommandToMcu(
 	IN UCHAR         Token,
 	IN UCHAR         Arg0,
 	IN UCHAR         Arg1);
-
+#ifdef RT2860
 BOOLEAN AsicCheckCommanOk(
 	IN PRTMP_ADAPTER pAd,
 	IN UCHAR		 Command);
-
+#endif
 VOID MacAddrRandomBssid(
 	IN  PRTMP_ADAPTER   pAd,
 	OUT PUCHAR pAddr);
@@ -4325,11 +4019,9 @@ VOID MlmeRadioOn(
 VOID BssTableInit(
 	IN BSS_TABLE *Tab);
 
-#ifdef DOT11_N_SUPPORT
 VOID BATableInit(
 	IN PRTMP_ADAPTER pAd,
     IN BA_TABLE *Tab);
-#endif // DOT11_N_SUPPORT //
 
 ULONG BssTableSearch(
 	IN BSS_TABLE *Tab,
@@ -4355,7 +4047,6 @@ VOID BssTableDeleteEntry(
 	IN      PUCHAR pBssid,
 	IN      UCHAR Channel);
 
-#ifdef DOT11_N_SUPPORT
 VOID BATableDeleteORIEntry(
 	IN OUT	PRTMP_ADAPTER pAd,
 	IN		BA_ORI_ENTRY	*pBAORIEntry);
@@ -4376,7 +4067,6 @@ VOID BATableTearRECEntry(
 	IN		UCHAR TID,
 	IN		UCHAR WCID,
 	IN		BOOLEAN ALL);
-#endif // DOT11_N_SUPPORT //
 
 VOID  BssEntrySet(
 	IN  PRTMP_ADAPTER   pAd,
@@ -4438,7 +4128,6 @@ ULONG  BssTableSetEntry(
 	IN USHORT LengthVIE,
 	IN PNDIS_802_11_VARIABLE_IEs pVIE);
 
-#ifdef DOT11_N_SUPPORT
 VOID BATableInsertEntry(
     IN	PRTMP_ADAPTER	pAd,
 	IN USHORT Aid,
@@ -4449,31 +4138,6 @@ VOID BATableInsertEntry(
 	IN UCHAR OriginatorStatus,
     IN BOOLEAN IsRecipient);
 
-#ifdef DOT11N_DRAFT3
-VOID Bss2040CoexistTimeOut(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-
-VOID  TriEventInit(
-	IN	PRTMP_ADAPTER	pAd);
-
-ULONG TriEventTableSetEntry(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT TRIGGER_EVENT_TAB *Tab,
-	IN PUCHAR pBssid,
-	IN HT_CAPABILITY_IE *pHtCapability,
-	IN UCHAR			HtCapabilityLen,
-	IN UCHAR			RegClass,
-	IN UCHAR ChannelNo);
-
-VOID TriEventCounterMaintenance(
-	IN	PRTMP_ADAPTER	pAd);
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
-
 VOID BssTableSsidSort(
 	IN  PRTMP_ADAPTER   pAd,
 	OUT BSS_TABLE *OutTab,
@@ -4638,6 +4302,12 @@ VOID InvalidStateWhenDisassociate(
 	IN  PRTMP_ADAPTER pAd,
 	IN  MLME_QUEUE_ELEM *Elem);
 
+#ifdef RT2870
+VOID MlmeCntlConfirm(
+	IN PRTMP_ADAPTER pAd,
+	IN ULONG MsgType,
+	IN USHORT Msg);
+#endif // RT2870 //
 
 VOID  ComposePsPoll(
 	IN  PRTMP_ADAPTER   pAd);
@@ -4721,142 +4391,6 @@ VOID PeerAuthSimpleRspGenAndSend(
 // Private routines in dls.c
 //
 
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-void DlsStateMachineInit(
-    IN PRTMP_ADAPTER pAd,
-    IN STATE_MACHINE *Sm,
-    OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID MlmeDlsReqAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerDlsReqAction(
-    IN PRTMP_ADAPTER	pAd,
-    IN MLME_QUEUE_ELEM	*Elem);
-
-VOID PeerDlsRspAction(
-    IN PRTMP_ADAPTER	pAd,
-    IN MLME_QUEUE_ELEM	*Elem);
-
-VOID MlmeDlsTearDownAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerDlsTearDownAction(
-    IN PRTMP_ADAPTER	pAd,
-    IN MLME_QUEUE_ELEM	*Elem);
-
-VOID RTMPCheckDLSTimeOut(
-	IN PRTMP_ADAPTER	pAd);
-
-BOOLEAN RTMPRcvFrameDLSCheck(
-	IN PRTMP_ADAPTER	pAd,
-	IN PHEADER_802_11	pHeader,
-	IN ULONG			Len,
-	IN PRT28XX_RXD_STRUC	pRxD);
-
-INT	RTMPCheckDLSFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN  PUCHAR          pDA);
-
-VOID RTMPSendDLSTearDownFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN  PUCHAR          pDA);
-
-NDIS_STATUS RTMPSendSTAKeyRequest(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pDA);
-
-NDIS_STATUS RTMPSendSTAKeyHandShake(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pDA);
-
-VOID DlsTimeoutAction(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-BOOLEAN MlmeDlsReqSanity(
-	IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PRT_802_11_DLS *pDLS,
-    OUT PUSHORT pReason);
-
-INT Set_DlsEntryInfo_Display_Proc(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR arg);
-
-MAC_TABLE_ENTRY *MacTableInsertDlsEntry(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR	pAddr,
-	IN  UINT	DlsEntryIdx);
-
-BOOLEAN MacTableDeleteDlsEntry(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT wcid,
-	IN PUCHAR pAddr);
-
-MAC_TABLE_ENTRY *DlsEntryTableLookup(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR	pAddr,
-	IN BOOLEAN	bResetIdelCount);
-
-MAC_TABLE_ENTRY *DlsEntryTableLookupByWcid(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR	wcid,
-	IN PUCHAR	pAddr,
-	IN BOOLEAN	bResetIdelCount);
-
-INT	Set_DlsAddEntry_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_DlsTearDownEntry_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef QOS_DLS_SUPPORT
-BOOLEAN PeerDlsReqSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pDA,
-    OUT PUCHAR pSA,
-    OUT USHORT *pCapabilityInfo,
-    OUT USHORT *pDlsTimeout,
-    OUT UCHAR *pRatesLen,
-    OUT UCHAR Rates[],
-    OUT UCHAR *pHtCapabilityLen,
-    OUT HT_CAPABILITY_IE *pHtCapability);
-
-BOOLEAN PeerDlsRspSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pDA,
-    OUT PUCHAR pSA,
-    OUT USHORT *pCapabilityInfo,
-    OUT USHORT *pStatus,
-    OUT UCHAR *pRatesLen,
-    OUT UCHAR Rates[],
-    OUT UCHAR *pHtCapabilityLen,
-    OUT HT_CAPABILITY_IE *pHtCapability);
-
-BOOLEAN PeerDlsTearDownSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pDA,
-    OUT PUCHAR pSA,
-    OUT USHORT *pReason);
-#endif // QOS_DLS_SUPPORT //
-
 //========================================
 
 VOID SyncStateMachineInit(
@@ -4961,12 +4495,6 @@ VOID CntlWaitAssocProc(
 	IN  PRTMP_ADAPTER   pAd,
 	IN  MLME_QUEUE_ELEM *Elem);
 
-#ifdef QOS_DLS_SUPPORT
-VOID CntlOidDLSSetupProc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-#endif // QOS_DLS_SUPPORT //
-
 VOID LinkUp(
 	IN  PRTMP_ADAPTER   pAd,
 	IN  UCHAR BssType);
@@ -5113,9 +4641,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
 	OUT PQOS_CAPABILITY_PARM pQosCapability,
 	OUT ULONG *pRalinkIe,
 	OUT UCHAR		 *pHtCapabilityLen,
-#ifdef CONFIG_STA_SUPPORT
 	OUT UCHAR		 *pPreNHtCapabilityLen,
-#endif // CONFIG_STA_SUPPORT //
 	OUT HT_CAPABILITY_IE *pHtCapability,
 	OUT UCHAR		 *AddHtInfoLen,
 	OUT ADD_HT_INFO_IE *AddHtInfo,
@@ -5343,23 +4869,19 @@ VOID MlmeUpdateTxRates(
 	IN 	BOOLEAN		 	bLinkUp,
 	IN	UCHAR			apidx);
 
-#ifdef DOT11_N_SUPPORT
 VOID MlmeUpdateHtTxRates(
 	IN PRTMP_ADAPTER 		pAd,
 	IN	UCHAR				apidx);
-#endif // DOT11_N_SUPPORT //
 
 VOID    RTMPCheckRates(
 	IN      PRTMP_ADAPTER   pAd,
 	IN OUT  UCHAR           SupRate[],
 	IN OUT  UCHAR           *SupRateLen);
 
-#ifdef CONFIG_STA_SUPPORT
 BOOLEAN RTMPCheckChannel(
 	IN PRTMP_ADAPTER pAd,
 	IN UCHAR		CentralChannel,
 	IN UCHAR		Channel);
-#endif // CONFIG_STA_SUPPORT //
 
 BOOLEAN 	RTMPCheckHt(
 	IN		PRTMP_ADAPTER	pAd,
@@ -5388,6 +4910,12 @@ CHAR RTMPMaxRssi(
 	IN CHAR				Rssi1,
 	IN CHAR				Rssi2);
 
+#ifdef RT30xx
+VOID AsicSetRxAnt(
+	IN PRTMP_ADAPTER	pAd,
+	IN UCHAR			Ant);
+#endif
+
 VOID AsicEvaluateRxAnt(
 	IN PRTMP_ADAPTER	pAd);
 
@@ -5600,15 +5128,12 @@ VOID RTMPIndicateWPA2Status(
 VOID	RTMPOPModeSwitching(
 	IN	PRTMP_ADAPTER	pAd);
 
-#ifdef CONFIG_STA_SUPPORT
 VOID    RTMPAddBSSIDCipher(
     IN  PRTMP_ADAPTER   pAd,
 	IN	UCHAR	Aid,
     IN  PNDIS_802_11_KEY    pKey,
     IN  UCHAR   CipherAlg);
-#endif // CONFIG_STA_SUPPORT //
 
-#ifdef DOT11_N_SUPPORT
 VOID	RTMPSetHT(
 	IN	PRTMP_ADAPTER	pAd,
 	IN	OID_SET_HT_PHYMODE *pHTPhyMode);
@@ -5616,7 +5141,6 @@ VOID	RTMPSetHT(
 VOID	RTMPSetIndividualHT(
 	IN	PRTMP_ADAPTER		pAd,
 	IN	UCHAR				apidx);
-#endif // DOT11_N_SUPPORT //
 
 VOID RTMPSendWirelessEvent(
 	IN	PRTMP_ADAPTER	pAd,
@@ -5793,13 +5317,6 @@ CHAR    ConvertToRssi(
 	IN CHAR				Rssi,
 	IN UCHAR    RssiNumber);
 
-
-#ifdef DOT11N_DRAFT3
-VOID BuildEffectedChannelList(
-	IN PRTMP_ADAPTER pAd);
-#endif // DOT11N_DRAFT3 //
-
-
 VOID APAsicEvaluateRxAnt(
 	IN PRTMP_ADAPTER	pAd);
 
@@ -6072,6 +5589,10 @@ VOID	RTMPSendTriggerFrame(
 	IN  UCHAR           TxRate,
 	IN	BOOLEAN			bQosNull);
 
+#ifdef RT30xx
+VOID RTMPFilterCalibration(
+	IN PRTMP_ADAPTER pAd);
+#endif // RT30xx //
 
 /* timeout -- ms */
 VOID RTMP_SetPeriodicTimer(
@@ -6263,7 +5784,6 @@ UCHAR VLAN_8023_Header_Copy(
 	OUT PUCHAR			pData,
 	IN	UCHAR			FromWhichBSSID);
 
-#ifdef DOT11_N_SUPPORT
 void ba_flush_reordering_timeout_mpdus(
 	IN PRTMP_ADAPTER	pAd,
 	IN PBA_REC_ENTRY	pBAEntry,
@@ -6281,7 +5801,6 @@ VOID BAOriSessionSetUp(
 VOID BASessionTearDownALL(
 	IN OUT	PRTMP_ADAPTER pAd,
 	IN		UCHAR Wcid);
-#endif // DOT11_N_SUPPORT //
 
 BOOLEAN OS_Need_Clone_Packet(void);
 
@@ -6429,7 +5948,6 @@ INT	Set_ResetStatCounter_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	IN	PUCHAR			arg);
 
-#ifdef DOT11_N_SUPPORT
 INT	Set_BASetup_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	IN	PUCHAR			arg);
@@ -6530,24 +6048,17 @@ INT	Set_HtMIMOPSmode_Proc(
 INT	Set_HtTxBASize_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	IN	PUCHAR			arg);
-#endif // DOT11_N_SUPPORT //
-
 
-
-#ifdef CONFIG_STA_SUPPORT
 //Dls ,	kathy
 VOID RTMPSendDLSTearDownFrame(
 	IN	PRTMP_ADAPTER	pAd,
 	IN	PUCHAR			pDA);
 
-#ifdef DOT11_N_SUPPORT
 //Block ACK
 VOID QueryBATABLE(
 	IN  PRTMP_ADAPTER pAd,
 	OUT PQUERYBA_TABLE pBAT);
-#endif // DOT11_N_SUPPORT //
 
-#ifdef WPA_SUPPLICANT_SUPPORT
 INT	    WpaCheckEapCode(
 	IN  PRTMP_ADAPTER   	pAd,
 	IN  PUCHAR				pFrame,
@@ -6560,26 +6071,16 @@ VOID    WpaSendMicFailureToWpaSupplicant(
 
 VOID    SendAssocIEsToWpaSupplicant(
     IN  PRTMP_ADAPTER       pAd);
-#endif // WPA_SUPPLICANT_SUPPORT //
 
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
 int wext_notify_event_assoc(
 	IN  RTMP_ADAPTER *pAd);
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-
-#endif // CONFIG_STA_SUPPORT //
 
-
-
-#ifdef DOT11_N_SUPPORT
 VOID Handle_BSS_Width_Trigger_Events(
 	IN PRTMP_ADAPTER pAd);
 
 void build_ext_channel_switch_ie(
 	IN PRTMP_ADAPTER pAd,
 	IN HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE *pIE);
-#endif // DOT11_N_SUPPORT //
-
 
 BOOLEAN APRxDoneInterruptHandle(
 	IN	PRTMP_ADAPTER	pAd);
@@ -6588,7 +6089,6 @@ BOOLEAN STARxDoneInterruptHandle(
 	IN	PRTMP_ADAPTER	pAd,
 	IN	BOOLEAN			argc);
 
-#ifdef DOT11_N_SUPPORT
 // AMPDU packet indication
 VOID Indicate_AMPDU_Packet(
 	IN	PRTMP_ADAPTER	pAd,
@@ -6600,7 +6100,6 @@ VOID Indicate_AMSDU_Packet(
 	IN	PRTMP_ADAPTER	pAd,
 	IN	RX_BLK			*pRxBlk,
 	IN	UCHAR			FromWhichBSSID);
-#endif // DOT11_N_SUPPORT //
 
 // Normal legacy Rx packet indication
 VOID Indicate_Legacy_Packet(
@@ -6630,8 +6129,6 @@ UINT deaggregate_AMSDU_announce(
 	IN	PUCHAR			pData,
 	IN	ULONG			DataSize);
 
-
-#ifdef CONFIG_STA_SUPPORT
 // remove LLC and get 802_3 Header
 #define  RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(_pRxBlk, _pHeader802_3)	\
 {																				\
@@ -6662,8 +6159,6 @@ UINT deaggregate_AMSDU_announce(
 	CONVERT_TO_802_3(_pHeader802_3, _pDA, _pSA, _pRxBlk->pData, 				\
 		_pRxBlk->DataSize, _pRemovedLLCSNAP);                                   \
 }
-#endif // CONFIG_STA_SUPPORT //
-
 
 BOOLEAN APFowardWirelessStaToWirelessSta(
 	IN	PRTMP_ADAPTER	pAd,
@@ -6680,13 +6175,9 @@ VOID Sta_Announce_or_Forward_802_3_Packet(
 	IN	PNDIS_PACKET	pPacket,
 	IN	UCHAR			FromWhichBSSID);
 
-
-#ifdef CONFIG_STA_SUPPORT
 #define ANNOUNCE_OR_FORWARD_802_3_PACKET(_pAd, _pPacket, _FromWhichBSS)\
 			Sta_Announce_or_Forward_802_3_Packet(_pAd, _pPacket, _FromWhichBSS);
 			//announce_802_3_packet(_pAd, _pPacket);
-#endif // CONFIG_STA_SUPPORT //
-
 
 PNDIS_PACKET DuplicatePacket(
 	IN	PRTMP_ADAPTER	pAd,
@@ -6729,22 +6220,6 @@ PNDIS_PACKET RTMPDeFragmentDataFrame(
 	IN	RX_BLK			*pRxBlk);
 
 ////////////////////////////////////////
-
-
-
-
-
-#ifdef SNMP_SUPPORT
-//for snmp , kathy
-typedef struct _DefaultKeyIdxValue
-{
-	UCHAR	KeyIdx;
-	UCHAR	Value[16];
-} DefaultKeyIdxValue, *PDefaultKeyIdxValue;
-#endif
-
-
-#ifdef CONFIG_STA_SUPPORT
 enum {
 	DIDmsg_lnxind_wlansniffrm		= 0x00000044,
 	DIDmsg_lnxind_wlansniffrm_hosttime	= 0x00010044,
@@ -6857,18 +6332,11 @@ struct iw_statistics *rt28xx_get_wireless_stats(
 VOID    RTMPSetDesiredRates(
     IN  PRTMP_ADAPTER   pAdapter,
     IN  LONG            Rates);
-#endif // CONFIG_STA_SUPPORT //
 
 INT	Set_FixedTxMode_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	IN	PUCHAR			arg);
 
-#ifdef CONFIG_APSTA_MIXED_SUPPORT
-INT	Set_OpMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-#endif // CONFIG_APSTA_MIXED_SUPPORT //
-
 static inline char* GetPhyMode(
 	int Mode)
 {
@@ -6879,13 +6347,11 @@ static inline char* GetPhyMode(
 
 		case MODE_OFDM:
 			return "OFDM";
-#ifdef DOT11_N_SUPPORT
 		case MODE_HTMIX:
 			return "HTMIX";
 
 		case MODE_HTGREENFIELD:
 			return "GREEN";
-#endif // DOT11_N_SUPPORT //
 		default:
 			return "N/A";
 	}
@@ -6902,10 +6368,8 @@ static inline char* GetBW(
 
 		case BW_20:
 			return "20M";
-#ifdef DOT11_N_SUPPORT
 		case BW_40:
 			return "40M";
-#endif // DOT11_N_SUPPORT //
 		default:
 			return "N/A";
 	}
@@ -6945,13 +6409,10 @@ INT rt28xx_ioctl(
 	IN	OUT	struct ifreq	*rq,
 	IN	INT			cmd);
 
-
-#ifdef CONFIG_STA_SUPPORT
 INT rt28xx_sta_ioctl(
 	IN	struct net_device	*net_dev,
 	IN	OUT	struct ifreq	*rq,
 	IN	INT			cmd);
-#endif // CONFIG_STA_SUPPORT //
 
 BOOLEAN RT28XXSecurityKeyAdd(
 	IN		PRTMP_ADAPTER		pAd,
@@ -6971,6 +6432,7 @@ void kill_thread_task(PRTMP_ADAPTER pAd);
 
 void tbtt_tasklet(unsigned long data);
 
+#ifdef RT2860
 //
 // Function Prototype in cmm_data_2860.c
 //
@@ -7035,7 +6497,6 @@ NDIS_STATUS RTMPCheckRxError(
 	IN	PRXWI_STRUC	pRxWI,
 	IN  PRT28XX_RXD_STRUC      pRxD);
 
-#ifdef CONFIG_STA_SUPPORT
 VOID RTMPInitPCIeLinkCtrlValue(
 	IN	PRTMP_ADAPTER	pAd);
 
@@ -7078,13 +6539,13 @@ VOID  RadioOnExec(
 	IN PVOID FunctionContext,
 	IN PVOID SystemSpecific2,
 	IN PVOID SystemSpecific3);
-#endif // CONFIG_STA_SUPPORT //
 
 VOID RT28xxPciMlmeRadioOn(
 	IN PRTMP_ADAPTER pAd);
 
 VOID RT28xxPciMlmeRadioOFF(
 	IN PRTMP_ADAPTER pAd);
+#endif /* RT2860 */
 
 VOID AsicTurnOffRFClk(
 	IN PRTMP_ADAPTER    pAd,
@@ -7094,6 +6555,493 @@ VOID AsicTurnOnRFClk(
 	IN PRTMP_ADAPTER 	pAd,
 	IN	UCHAR			Channel);
 
+#ifdef RT30xx
+NTSTATUS RT30xxWriteRFRegister(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	UCHAR			RegID,
+	IN	UCHAR			Value);
+
+NTSTATUS RT30xxReadRFRegister(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	UCHAR			RegID,
+	IN	PUCHAR			pValue);
+
+//2008/09/11:KH add to support efuse<--
+UCHAR eFuseReadRegisters(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	USHORT Offset,
+	IN	USHORT Length,
+	OUT	USHORT* pData);
+
+VOID eFuseReadPhysical(
+	IN	PRTMP_ADAPTER	pAd,
+  	IN	PUSHORT lpInBuffer,
+  	IN	ULONG nInBufferSize,
+  	OUT	PUSHORT lpOutBuffer,
+  	IN	ULONG nOutBufferSize
+);
+
+NTSTATUS eFuseRead(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	USHORT			Offset,
+	OUT	PUCHAR			pData,
+	IN	USHORT			Length);
+
+VOID eFusePhysicalWriteRegisters(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	USHORT Offset,
+	IN	USHORT Length,
+	OUT	USHORT* pData);
+
+NTSTATUS eFuseWriteRegisters(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	USHORT Offset,
+	IN	USHORT Length,
+	IN	USHORT* pData);
+
+VOID eFuseWritePhysical(
+	IN	PRTMP_ADAPTER	pAd,
+  	PUSHORT lpInBuffer,
+	ULONG nInBufferSize,
+  	PUCHAR lpOutBuffer,
+  	ULONG nOutBufferSize
+);
+
+NTSTATUS eFuseWrite(
+   	IN	PRTMP_ADAPTER	pAd,
+	IN	USHORT			Offset,
+	IN	PUCHAR			pData,
+	IN	USHORT			length);
+
+INT set_eFuseGetFreeBlockCount_Proc(
+   	IN	PRTMP_ADAPTER	pAd,
+	IN	PUCHAR			arg);
+
+INT set_eFusedump_Proc(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	PUCHAR			arg);
+
+INT set_eFuseLoadFromBin_Proc(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	PUCHAR			arg);
+
+NTSTATUS eFuseWriteRegistersFromBin(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	USHORT Offset,
+	IN	USHORT Length,
+	IN	USHORT* pData);
+
+VOID eFusePhysicalReadRegisters(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	USHORT Offset,
+	IN	USHORT Length,
+	OUT	USHORT* pData);
+
+NDIS_STATUS NICLoadEEPROM(
+	IN PRTMP_ADAPTER pAd);
+
+BOOLEAN bNeedLoadEEPROM(
+	IN	PRTMP_ADAPTER	pAd);
+//2008/09/11:KH add to support efuse-->
+#endif // RT30xx //
+
+#ifdef RT30xx
+// add by johnli, RF power sequence setup
+VOID RT30xxLoadRFNormalModeSetup(
+	IN PRTMP_ADAPTER 	pAd);
+
+VOID RT30xxLoadRFSleepModeSetup(
+	IN PRTMP_ADAPTER 	pAd);
+
+VOID RT30xxReverseRFSleepModeSetup(
+	IN PRTMP_ADAPTER 	pAd);
+// end johnli
+#endif // RT30xx //
+
+#ifdef RT2870
+//
+// Function Prototype in rtusb_bulk.c
+//
+VOID	RTUSBInitTxDesc(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	PTX_CONTEXT		pTxContext,
+	IN	UCHAR			BulkOutPipeId,
+	IN	usb_complete_t	Func);
+
+VOID	RTUSBInitHTTxDesc(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	PHT_TX_CONTEXT	pTxContext,
+	IN	UCHAR			BulkOutPipeId,
+	IN	ULONG			BulkOutSize,
+	IN	usb_complete_t	Func);
+
+VOID	RTUSBInitRxDesc(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	PRX_CONTEXT		pRxContext);
+
+VOID RTUSBCleanUpDataBulkOutQueue(
+	IN	PRTMP_ADAPTER	pAd);
+
+VOID RTUSBCancelPendingBulkOutIRP(
+	IN	PRTMP_ADAPTER	pAd);
+
+VOID RTUSBBulkOutDataPacket(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	UCHAR			BulkOutPipeId,
+	IN	UCHAR			Index);
+
+VOID RTUSBBulkOutNullFrame(
+	IN	PRTMP_ADAPTER	pAd);
+
+VOID RTUSBBulkOutRTSFrame(
+	IN	PRTMP_ADAPTER	pAd);
+
+VOID RTUSBCancelPendingBulkInIRP(
+	IN	PRTMP_ADAPTER	pAd);
+
+VOID RTUSBCancelPendingIRPs(
+	IN	PRTMP_ADAPTER	pAd);
+
+VOID RTUSBBulkOutMLMEPacket(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	UCHAR			Index);
+
+VOID RTUSBBulkOutPsPoll(
+	IN	PRTMP_ADAPTER	pAd);
+
+VOID RTUSBCleanUpMLMEBulkOutQueue(
+	IN	PRTMP_ADAPTER	pAd);
+
+VOID RTUSBKickBulkOut(
+	IN	PRTMP_ADAPTER pAd);
+
+VOID	RTUSBBulkReceive(
+	IN	PRTMP_ADAPTER	pAd);
+
+VOID DoBulkIn(
+	IN RTMP_ADAPTER *pAd);
+
+VOID RTUSBInitRxDesc(
+	IN	PRTMP_ADAPTER	pAd,
+	IN  PRX_CONTEXT		pRxContext);
+
+VOID RTUSBBulkRxHandle(
+	IN unsigned long data);
+
+//
+// Function Prototype in rtusb_io.c
+//
+NTSTATUS RTUSBMultiRead(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	USHORT			Offset,
+	OUT	PUCHAR			pData,
+	IN	USHORT			length);
+
+NTSTATUS RTUSBMultiWrite(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	USHORT			Offset,
+	IN	PUCHAR			pData,
+	IN	USHORT			length);
+
+NTSTATUS RTUSBMultiWrite_OneByte(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	USHORT			Offset,
+	IN	PUCHAR			pData);
+
+NTSTATUS RTUSBReadBBPRegister(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	UCHAR			Id,
+	IN	PUCHAR			pValue);
+
+NTSTATUS RTUSBWriteBBPRegister(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	UCHAR			Id,
+	IN	UCHAR			Value);
+
+NTSTATUS RTUSBWriteRFRegister(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	UINT32			Value);
+
+#ifndef RT30xx
+NTSTATUS	RT30xxWriteRFRegister(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	UCHAR			RegID,
+	IN	UCHAR			Value);
+
+NTSTATUS	RT30xxReadRFRegister(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	UCHAR			RegID,
+	IN	PUCHAR			pValue);
+#endif
+
+NTSTATUS RTUSB_VendorRequest(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	UINT32			TransferFlags,
+	IN	UCHAR			ReservedBits,
+	IN	UCHAR			Request,
+	IN	USHORT			Value,
+	IN	USHORT			Index,
+	IN	PVOID			TransferBuffer,
+	IN	UINT32			TransferBufferLength);
+
+NTSTATUS RTUSBReadEEPROM(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	USHORT			Offset,
+	OUT	PUCHAR			pData,
+	IN	USHORT			length);
+
+NTSTATUS RTUSBWriteEEPROM(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	USHORT			Offset,
+	IN	PUCHAR			pData,
+	IN	USHORT			length);
+
+VOID RTUSBPutToSleep(
+	IN	PRTMP_ADAPTER	pAd);
+
+NTSTATUS RTUSBWakeUp(
+	IN	PRTMP_ADAPTER	pAd);
+
+VOID RTUSBInitializeCmdQ(
+	IN	PCmdQ	cmdq);
+
+NDIS_STATUS	RTUSBEnqueueCmdFromNdis(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	NDIS_OID		Oid,
+	IN	BOOLEAN			SetInformation,
+	IN	PVOID			pInformationBuffer,
+	IN	UINT32			InformationBufferLength);
+
+NDIS_STATUS RTUSBEnqueueInternalCmd(
+	IN	PRTMP_ADAPTER	pAd,
+	IN NDIS_OID			Oid,
+	IN PVOID			pInformationBuffer,
+	IN UINT32			InformationBufferLength);
+
+VOID RTUSBDequeueCmd(
+	IN	PCmdQ		cmdq,
+	OUT	PCmdQElmt	*pcmdqelmt);
+
+INT RTUSBCmdThread(
+	IN OUT PVOID Context);
+
+INT TimerQThread(
+	IN OUT PVOID Context);
+
+RT2870_TIMER_ENTRY *RT2870_TimerQ_Insert(
+	IN RTMP_ADAPTER *pAd,
+	IN RALINK_TIMER_STRUCT *pTimer);
+
+BOOLEAN RT2870_TimerQ_Remove(
+	IN RTMP_ADAPTER *pAd,
+	IN RALINK_TIMER_STRUCT *pTimer);
+
+void RT2870_TimerQ_Exit(
+	IN RTMP_ADAPTER *pAd);
+
+void RT2870_TimerQ_Init(
+	IN RTMP_ADAPTER *pAd);
+
+VOID RT2870_BssBeaconExit(
+	IN RTMP_ADAPTER *pAd);
+
+VOID RT2870_BssBeaconStop(
+	IN RTMP_ADAPTER *pAd);
+
+VOID RT2870_BssBeaconStart(
+	IN RTMP_ADAPTER * pAd);
+
+VOID RT2870_BssBeaconInit(
+	IN RTMP_ADAPTER *pAd);
+
+VOID RT2870_WatchDog(
+	IN RTMP_ADAPTER *pAd);
+
+NTSTATUS RTUSBWriteMACRegister(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	USHORT			Offset,
+	IN	UINT32			Value);
+
+NTSTATUS RTUSBReadMACRegister(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	USHORT			Offset,
+	OUT	PUINT32			pValue);
+
+NTSTATUS RTUSBSingleWrite(
+	IN 	RTMP_ADAPTER 	*pAd,
+	IN	USHORT			Offset,
+	IN	USHORT			Value);
+
+NTSTATUS RTUSBFirmwareRun(
+	IN	PRTMP_ADAPTER	pAd);
+
+NTSTATUS RTUSBFirmwareWrite(
+	IN PRTMP_ADAPTER pAd,
+	IN PUCHAR		pFwImage,
+	IN ULONG		FwLen);
+
+NTSTATUS	RTUSBFirmwareOpmode(
+	IN	PRTMP_ADAPTER	pAd,
+	OUT	PUINT32			pValue);
+
+NTSTATUS	RTUSBVenderReset(
+	IN	PRTMP_ADAPTER	pAd);
+
+NDIS_STATUS RTUSBSetHardWareRegister(
+	IN	PRTMP_ADAPTER	pAdapter,
+	IN	PVOID			pBuf);
+
+NDIS_STATUS RTUSBQueryHardWareRegister(
+	IN	PRTMP_ADAPTER	pAdapter,
+	IN	PVOID			pBuf);
+
+VOID CMDHandler(
+    IN PRTMP_ADAPTER pAd);
+
+
+NDIS_STATUS	 CreateThreads(
+	IN	struct net_device *net_dev );
+
+
+VOID MacTableInitialize(
+	IN  PRTMP_ADAPTER   pAd);
+
+VOID MlmeSetPsm(
+	IN PRTMP_ADAPTER pAd,
+	IN USHORT psm);
+
+NDIS_STATUS RTMPWPAAddKeyProc(
+	IN  PRTMP_ADAPTER   pAd,
+	IN  PVOID           pBuf);
+
+VOID AsicRxAntEvalAction(
+	IN PRTMP_ADAPTER pAd);
+
+void append_pkt(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	PUCHAR			pHeader802_3,
+    IN  UINT            HdrLen,
+	IN	PUCHAR			pData,
+	IN	ULONG			DataSize,
+	OUT  PNDIS_PACKET	*ppPacket);
+
+UINT deaggregate_AMSDU_announce(
+	IN	PRTMP_ADAPTER	pAd,
+	PNDIS_PACKET		pPacket,
+	IN	PUCHAR			pData,
+	IN	ULONG			DataSize);
+
+NDIS_STATUS	RTMPCheckRxError(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	PHEADER_802_11	pHeader,
+	IN	PRXWI_STRUC	pRxWI,
+	IN	PRT28XX_RXD_STRUC	pRxINFO);
+
+
+VOID RTUSBMlmeHardTransmit(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	PMGMT_STRUC		pMgmt);
+
+INT MlmeThread(
+	IN PVOID Context);
+
+//
+// Function Prototype in rtusb_data.c
+//
+NDIS_STATUS	RTUSBFreeDescriptorRequest(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	UCHAR			BulkOutPipeId,
+	IN	UINT32			NumberRequired);
+
+
+BOOLEAN	RTUSBNeedQueueBackForAgg(
+	IN RTMP_ADAPTER *pAd,
+	IN UCHAR		BulkOutPipeId);
+
+
+VOID RTMPWriteTxInfo(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	PTXINFO_STRUC 	pTxInfo,
+	IN	  USHORT		USBDMApktLen,
+	IN	  BOOLEAN		bWiv,
+	IN	  UCHAR			QueueSel,
+	IN	  UCHAR			NextValid,
+	IN	  UCHAR			TxBurst);
+
+//
+// Function Prototype in cmm_data_2870.c
+//
+USHORT RtmpUSB_WriteSubTxResource(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	TX_BLK			*pTxBlk,
+	IN	BOOLEAN			bIsLast,
+	OUT	USHORT			*FreeNumber);
+
+USHORT RtmpUSB_WriteSingleTxResource(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	TX_BLK			*pTxBlk,
+	IN	BOOLEAN			bIsLast,
+	OUT	USHORT			*FreeNumber);
+
+USHORT	RtmpUSB_WriteFragTxResource(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	TX_BLK			*pTxBlk,
+	IN	UCHAR			fragNum,
+	OUT	USHORT			*FreeNumber);
+
+USHORT RtmpUSB_WriteMultiTxResource(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	TX_BLK			*pTxBlk,
+	IN	UCHAR			frameNum,
+	OUT	USHORT			*FreeNumber);
+
+VOID RtmpUSB_FinalWriteTxResource(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	TX_BLK			*pTxBlk,
+	IN	USHORT			totalMPDUSize,
+#ifdef RT2860
+	IN	USHORT			FirstTxIdx);
+#endif
+	IN	USHORT			TxIdx);
+
+VOID RtmpUSBDataLastTxIdx(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	UCHAR			QueIdx,
+	IN	USHORT			TxIdx);
+
+VOID RtmpUSBDataKickOut(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	TX_BLK			*pTxBlk,
+	IN	UCHAR			QueIdx);
+
+
+int RtmpUSBMgmtKickOut(
+	IN RTMP_ADAPTER 	*pAd,
+	IN UCHAR 			QueIdx,
+	IN PNDIS_PACKET		pPacket,
+	IN PUCHAR			pSrcBufVA,
+	IN UINT 			SrcBufLen);
+
+VOID RtmpUSBNullFrameKickOut(
+	IN RTMP_ADAPTER *pAd,
+	IN UCHAR		QueIdx,
+	IN UCHAR		*pNullFrame,
+	IN UINT32		frameLen);
+
+VOID RT28xxUsbStaAsicForceWakeup(
+	IN PRTMP_ADAPTER pAd,
+	IN BOOLEAN       bFromTx);
+
+VOID RT28xxUsbStaAsicSleepThenAutoWakeup(
+	IN PRTMP_ADAPTER pAd,
+	IN USHORT TbttNumToNextWakeUp);
+
+VOID RT28xxUsbMlmeRadioOn(
+	IN PRTMP_ADAPTER pAd);
+
+VOID RT28xxUsbMlmeRadioOFF(
+	IN PRTMP_ADAPTER pAd);
+#endif // RT2870 //
 
 ////////////////////////////////////////
 
@@ -7120,10 +7068,10 @@ PCHAR   RTMPGetRalinkEncryModeStr(
     IN  USHORT encryMode);
 //////////////////////////////////////
 
-#ifdef CONFIG_STA_SUPPORT
 VOID AsicStaBbpTuning(
 	IN PRTMP_ADAPTER pAd);
 
+#ifdef RT2860
 VOID AsicResetFromDMABusy(
 	IN PRTMP_ADAPTER pAd);
 
@@ -7135,7 +7083,16 @@ VOID AsicResetMAC(
 
 VOID AsicResetPBF(
 	IN PRTMP_ADAPTER pAd);
-#endif // CONFIG_STA_SUPPORT //
+#endif
+#ifdef RT2870
+BOOLEAN StaAddMacTableEntry(
+	IN  PRTMP_ADAPTER		pAd,
+	IN  PMAC_TABLE_ENTRY	pEntry,
+	IN  UCHAR				MaxSupportedRateIn500Kbps,
+	IN  HT_CAPABILITY_IE	*pHtCapability,
+	IN  UCHAR				HtCapabilityLen,
+	IN  USHORT        		CapabilityInfo);
+#endif
 
 void RTMP_IndicateMediaState(
 	IN	PRTMP_ADAPTER	pAd);
diff --git a/drivers/staging/rt2860/rtmp_def.h b/drivers/staging/rt2860/rtmp_def.h
index 25a53d83a0d..5dde860cbbd 100644
--- a/drivers/staging/rt2860/rtmp_def.h
+++ b/drivers/staging/rt2860/rtmp_def.h
@@ -54,15 +54,6 @@
 #define NIC_TAG             ((ULONG)'0682')
 #define NIC_DBG_STRING      ("**RT28xx**")
 
-#ifdef SNMP_SUPPORT
-// for snmp
-// to get manufacturer OUI, kathy, 2008_0220
-#define ManufacturerOUI_LEN			3
-#define ManufacturerNAME			("Ralink Technology Company.")
-#define	ResourceTypeIdName			("Ralink_ID")
-#endif
-
-
 #define RALINK_2883_VERSION		((UINT32)0x28830300)
 #define RALINK_2880E_VERSION	((UINT32)0x28720200)
 #define RALINK_3070_VERSION		((UINT32)0x30700200)
@@ -111,6 +102,7 @@
 // Entry number for each DMA descriptor ring
 //
 
+#ifdef RT2860
 #define TX_RING_SIZE            64 //64
 #define MGMT_RING_SIZE          128
 #define RX_RING_SIZE            128 //64
@@ -118,12 +110,15 @@
 #define MAX_DMA_DONE_PROCESS    TX_RING_SIZE
 #define MAX_TX_DONE_PROCESS     TX_RING_SIZE //8
 #define LOCAL_TXBUF_SIZE        2
-
-
-#ifdef MULTIPLE_CARD_SUPPORT
-// MC: Multple Cards
-#define MAX_NUM_OF_MULTIPLE_CARD		32
-#endif // MULTIPLE_CARD_SUPPORT //
+#endif
+#ifdef RT2870
+#define TX_RING_SIZE            8 // 1
+#define PRIO_RING_SIZE          8
+#define MGMT_RING_SIZE       32 // PRIO_RING_SIZE
+#define RX_RING_SIZE            8
+#define MAX_TX_PROCESS          4
+#define LOCAL_TXBUF_SIZE        2048
+#endif // RT2870 //
 
 #define MAX_RX_PROCESS          128 //64 //32
 #define NUM_OF_LOCAL_TXBUF      2
@@ -153,7 +148,11 @@
 #define MAX_PACKETS_IN_PS_QUEUE				128	//32
 #define WMM_NUM_OF_AC                       4  /* AC0, AC1, AC2, and AC3 */
 
-
+#ifdef RT30xx
+//2008/09/11:KH add to support efuse<--
+#define MAX_EEPROM_BIN_FILE_SIZE					1024
+//2008/09/11:KH add to support efuse-->
+#endif
 
 // RxFilter
 #define STANORMAL	 0x17f97
@@ -210,6 +209,7 @@
 #define fOP_STATUS_WAKEUP_NOW               0x00008000
 #define fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE       0x00020000
 
+#ifdef RT2860
 //
 //  RTMP_ADAPTER PSFlags : related to advanced power save.
 //
@@ -222,10 +222,7 @@
 // Indicate driver should IMMEDIATELY fo to sleep after receiving AP's beacon in which  doesn't indicate unicate nor multicast packets for me
 //. This flag is used ONLY in RTMPHandleRxDoneInterrupt routine.
 #define fRTMP_PS_GO_TO_SLEEP_NOW         0x00000008
-
-#ifdef DOT11N_DRAFT3
-#define fOP_STATUS_SCAN_2040               	    0x00040000
-#endif // DOT11N_DRAFT3 //
+#endif
 
 #define CCKSETPROTECT		0x1
 #define OFDMSETPROTECT		0x2
@@ -251,10 +248,6 @@
 #define fCLIENT_STATUS_MCSFEEDBACK_CAPABLE  0x00000400
 #define fCLIENT_STATUS_APSD_CAPABLE         0x00000800  /* UAPSD STATION */
 
-#ifdef DOT11N_DRAFT3
-#define fCLIENT_STATUS_BSSCOEXIST_CAPABLE	0x00001000
-#endif // DOT11N_DRAFT3 //
-
 #define fCLIENT_STATUS_RALINK_CHIPSET		0x00100000
 //
 //  STA configuration flags
@@ -330,16 +323,14 @@
 #define MAX_MESH_NUM				0
 
 #define MAX_APCLI_NUM				0
-#ifdef APCLI_SUPPORT
-#undef	MAX_APCLI_NUM
-#define MAX_APCLI_NUM				1
-#endif // APCLI_SUPPORT //
 
 #define MAX_MBSSID_NUM				1
+#if defined(RT2860) || defined(RT30xx)
 #ifdef MBSS_SUPPORT
 #undef	MAX_MBSSID_NUM
 #define MAX_MBSSID_NUM				(8 - MAX_MESH_NUM - MAX_APCLI_NUM)
 #endif // MBSS_SUPPORT //
+#endif
 
 /* sanity check for apidx */
 #define MBSS_MR_APIDX_SANITY_CHECK(apidx) \
@@ -582,6 +573,9 @@
 // For 802.11n D3.03
 //#define IE_NEW_EXT_CHA_OFFSET             62    // 802.11n d1. New extension channel offset elemet
 #define IE_SECONDARY_CH_OFFSET		62	// 802.11n D3.03	Secondary Channel Offset element
+#ifdef RT2870
+#define IE_WAPI							68		// WAPI information element
+#endif
 #define IE_2040_BSS_COEXIST               72    // 802.11n D3.0.3
 #define IE_2040_BSS_INTOLERANT_REPORT     73    // 802.11n D3.03
 #define IE_OVERLAPBSS_SCAN_PARM           74    // 802.11n D3.03
@@ -630,9 +624,10 @@
 #define AP_CNTL_STATE_MACHINE           15
 #define AP_WPA_STATE_MACHINE            16
 
-#ifdef QOS_DLS_SUPPORT
-#define DLS_STATE_MACHINE               26
-#endif // QOS_DLS_SUPPORT //
+#ifdef RT30xx
+#define WSC_STATE_MACHINE            17
+#define WSC_UPNP_STATE_MACHINE		    18
+#endif
 
 //
 // STA's CONTROL/CONNECT state machine: states, events, total function #
@@ -647,6 +642,9 @@
 #define CNTL_WAIT_AUTH2                 7
 #define CNTL_WAIT_OID_LIST_SCAN         8
 #define CNTL_WAIT_OID_DISASSOC          9
+#ifdef RT2870
+#define CNTL_WAIT_SCAN_FOR_CONNECT      10
+#endif // RT2870 //
 
 #define MT2_ASSOC_CONF                  34
 #define MT2_AUTH_CONF                   35
@@ -948,79 +946,6 @@
 
 #define AP_WPA_FUNC_SIZE                (AP_MAX_WPA_PTK_STATE * AP_MAX_WPA_MSG)
 
-#ifdef APCLI_SUPPORT
-//ApCli authentication state machine
-#define APCLI_AUTH_REQ_IDLE                0
-#define APCLI_AUTH_WAIT_SEQ2               1
-#define APCLI_AUTH_WAIT_SEQ4               2
-#define APCLI_MAX_AUTH_STATE               3
-
-#define APCLI_AUTH_MACHINE_BASE            0
-#define APCLI_MT2_MLME_AUTH_REQ            0
-#define APCLI_MT2_MLME_DEAUTH_REQ          1
-#define APCLI_MT2_PEER_AUTH_EVEN           2
-#define APCLI_MT2_PEER_DEAUTH              3
-#define APCLI_MT2_AUTH_TIMEOUT             4
-#define APCLI_MAX_AUTH_MSG                 5
-
-#define APCLI_AUTH_FUNC_SIZE               (APCLI_MAX_AUTH_STATE * APCLI_MAX_AUTH_MSG)
-
-//ApCli association state machine
-#define APCLI_ASSOC_IDLE                   0
-#define APCLI_ASSOC_WAIT_RSP               1
-#define APCLI_MAX_ASSOC_STATE              2
-
-#define APCLI_ASSOC_MACHINE_BASE           0
-#define APCLI_MT2_MLME_ASSOC_REQ           0
-#define APCLI_MT2_MLME_DISASSOC_REQ        1
-#define APCLI_MT2_PEER_DISASSOC_REQ        2
-#define APCLI_MT2_PEER_ASSOC_RSP           3
-#define APCLI_MT2_ASSOC_TIMEOUT            4
-#define APCLI_MAX_ASSOC_MSG                5
-
-#define APCLI_ASSOC_FUNC_SIZE              (APCLI_MAX_ASSOC_STATE * APCLI_MAX_ASSOC_MSG)
-
-//ApCli sync state machine
-#define APCLI_SYNC_IDLE                   0  // merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state
-#define APCLI_JOIN_WAIT_PROBE_RSP         1
-#define APCLI_MAX_SYNC_STATE              2
-
-#define APCLI_SYNC_MACHINE_BASE           0
-#define APCLI_MT2_MLME_PROBE_REQ          0
-#define APCLI_MT2_PEER_PROBE_RSP          1
-#define APCLI_MT2_PROBE_TIMEOUT           2
-#define APCLI_MAX_SYNC_MSG                3
-
-#define APCLI_SYNC_FUNC_SIZE              (APCLI_MAX_SYNC_STATE * APCLI_MAX_SYNC_MSG)
-
-//ApCli ctrl state machine
-#define APCLI_CTRL_DISCONNECTED           0  // merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state
-#define APCLI_CTRL_PROBE                  1
-#define APCLI_CTRL_AUTH                   2
-#define APCLI_CTRL_AUTH_2                 3
-#define APCLI_CTRL_ASSOC                  4
-#define APCLI_CTRL_DEASSOC                5
-#define APCLI_CTRL_CONNECTED              6
-#define APCLI_MAX_CTRL_STATE              7
-
-#define APCLI_CTRL_MACHINE_BASE           0
-#define APCLI_CTRL_JOIN_REQ               0
-#define APCLI_CTRL_PROBE_RSP              1
-#define APCLI_CTRL_AUTH_RSP               2
-#define APCLI_CTRL_DISCONNECT_REQ         3
-#define APCLI_CTRL_PEER_DISCONNECT_REQ    4
-#define APCLI_CTRL_ASSOC_RSP              5
-#define APCLI_CTRL_DEASSOC_RSP            6
-#define APCLI_CTRL_JOIN_REQ_TIMEOUT       7
-#define APCLI_CTRL_AUTH_REQ_TIMEOUT       8
-#define APCLI_CTRL_ASSOC_REQ_TIMEOUT      9
-#define APCLI_MAX_CTRL_MSG                10
-
-#define APCLI_CTRL_FUNC_SIZE              (APCLI_MAX_CTRL_STATE * APCLI_MAX_CTRL_MSG)
-
-#endif	// APCLI_SUPPORT //
-
-
 // =============================================================================
 
 // value domain of 802.11 header FC.Tyte, which is b3..b2 of the 1st-byte of MAC header
@@ -1107,10 +1032,9 @@
 // Preamble MODE in TxD
 #define MODE_CCK	0
 #define MODE_OFDM   1
-#ifdef DOT11_N_SUPPORT
 #define MODE_HTMIX	2
 #define MODE_HTGREENFIELD	3
-#endif // DOT11_N_SUPPORT //
+
 // MCS for CCK.  BW.SGI.STBC are reserved
 #define MCS_LONGP_RATE_1                      0	 // long preamble CCK 1Mbps
 #define MCS_LONGP_RATE_2                      1	// long preamble CCK 1Mbps
@@ -1157,12 +1081,10 @@
 #define MCS_32		32
 #define MCS_AUTO		33
 
-#ifdef DOT11_N_SUPPORT
 // OID_HTPHYMODE
 // MODE
 #define HTMODE_MM	0
 #define HTMODE_GF	1
-#endif // DOT11_N_SUPPORT //
 
 // Fixed Tx MODE - HT, CCK or OFDM
 #define FIXED_TXMODE_HT		0
@@ -1174,15 +1096,12 @@
 #define BW_BOTH		BAND_WIDTH_BOTH
 #define BW_10		BAND_WIDTH_10	// 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field.
 
-#ifdef DOT11_N_SUPPORT
 // SHORTGI
 #define GI_400		GAP_INTERVAL_400	// only support in HT mode
 #define GI_BOTH		GAP_INTERVAL_BOTH
-#endif // DOT11_N_SUPPORT //
 #define GI_800		GAP_INTERVAL_800
 // STBC
 #define STBC_NONE	0
-#ifdef DOT11_N_SUPPORT
 #define STBC_USE	1	// limited use in rt2860b phy
 #define RXSTBC_ONE	1	// rx support of one spatial stream
 #define RXSTBC_TWO	2	// rx support of 1 and 2 spatial stream
@@ -1204,8 +1123,6 @@
 #define	AMSDU_0	0
 #define	AMSDU_1		1
 
-#endif // DOT11_N_SUPPORT //
-
 // MCS use 7 bits
 #define TXRATEMIMO		0x80
 #define TXRATEMCS		0x7F
@@ -1298,6 +1215,10 @@
 #define RFIC_2750                   4       // 2.4G/5G 1T2R
 #define RFIC_3020                   5       // 2.4G 1T1R
 #define RFIC_2020                   6       // 2.4G B/G
+#ifdef RT30xx
+#define RFIC_3021                   7       // 2.4G 1T2R
+#define RFIC_3022                   8       // 2.4G 2T2R
+#endif
 
 // LED Status.
 #define LED_LINK_DOWN               0
@@ -1353,17 +1274,6 @@
 #define OPMODE_AP                   1
 //#define OPMODE_L3_BRG               2       // as AP and STA at the same time
 
-#ifdef RT_BIG_ENDIAN
-#define DIR_READ                    0
-#define DIR_WRITE                   1
-#define TYPE_TXD                    0
-#define TYPE_RXD                    1
-#define TYPE_TXINFO					0
-#define TYPE_RXINFO					1
-#define TYPE_TXWI					0
-#define TYPE_RXWI					1
-#endif
-
 // ========================= AP rtmp_def.h ===========================
 // value domain for pAd->EventTab.Log[].Event
 #define EVENT_RESET_ACCESS_POINT    0 // Log = "hh:mm:ss   Restart Access Point"
@@ -1410,24 +1320,6 @@
 #define INT_MESH                   	0x0500
 
 // Use bitmap to allow coexist of ATE_TXFRAME and ATE_RXFRAME(i.e.,to support LoopBack mode)
-#ifdef RALINK_ATE
-#define	ATE_START                   0x00   // Start ATE
-#define	ATE_STOP                    0x80   // Stop ATE
-#define	ATE_TXCONT                  0x05   // Continuous Transmit
-#define	ATE_TXCARR                  0x09   // Transmit Carrier
-#define	ATE_TXCARRSUPP              0x11   // Transmit Carrier Suppression
-#define	ATE_TXFRAME                 0x01   // Transmit Frames
-#define	ATE_RXFRAME                 0x02   // Receive Frames
-#ifdef RALINK_28xx_QA
-#define ATE_TXSTOP                  0xe2   // Stop Transmition(i.e., TXCONT, TXCARR, TXCARRSUPP, and TXFRAME)
-#define ATE_RXSTOP					0xfd   // Stop receiving Frames
-#define	BBP22_TXFRAME     			0x00   // Transmit Frames
-#define	BBP22_TXCONT_OR_CARRSUPP    0x80   // Continuous Transmit or Carrier Suppression
-#define	BBP22_TXCARR                0xc1   // Transmit Carrier
-#define	BBP24_TXCONT                0x00   // Continuous Transmit
-#define	BBP24_CARRSUPP              0x01   // Carrier Suppression
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
 
 // WEP Key TYPE
 #define WEP_HEXADECIMAL_TYPE    0
@@ -1498,7 +1390,6 @@
 
 // End - WIRELESS EVENTS definition
 
-#ifdef CONFIG_STA_SUPPORT
 // definition for DLS, kathy
 #define	MAX_NUM_OF_INIT_DLS_ENTRY   1
 #define	MAX_NUM_OF_DLS_ENTRY        MAX_NUMBER_OF_DLS_ENTRY
@@ -1508,15 +1399,12 @@
 #define MAX_RX_REORDERBUF		64
 #define DEFAULT_TX_TIMEOUT		30
 #define DEFAULT_RX_TIMEOUT		30
-#ifndef CONFIG_AP_SUPPORT
 #define MAX_BARECI_SESSION		8
-#endif
 
 #ifndef IW_ESSID_MAX_SIZE
 /* Maximum size of the ESSID and pAd->nickname strings */
 #define IW_ESSID_MAX_SIZE   		32
 #endif
-#endif // CONFIG_STA_SUPPORT //
 
 #ifdef MCAST_RATE_SPECIFIC
 #define MCAST_DISABLE	0
@@ -1525,6 +1413,7 @@
 #define MCAST_HTMIX		3
 #endif // MCAST_RATE_SPECIFIC //
 
+#ifdef RT2860
 // For AsicRadioOff/AsicRadioOn/AsicForceWakeup function
 // This is to indicate from where to call this function.
 #define DOT11POWERSAVE		0	// TO do .11 power save sleep
@@ -1532,8 +1421,14 @@
 #define RTMP_HALT			2	// Called from Halt handler.
 #define GUI_IDLE_POWER_SAVE	3	// Call to sleep before link up with AP
 #define FROM_TX				4	// Force wake up from Tx packet.
-
-
+#endif
+#ifdef RT2870
+// For AsicRadioOff/AsicRadioOn function
+#define DOT11POWERSAVE		0
+#define GUIRADIO_OFF		1
+#define RTMP_HALT		    2
+#define GUI_IDLE_POWER_SAVE		3
+#endif
 
 // definition for WpaSupport flag
 #define WPA_SUPPLICANT_DISABLE				0
@@ -1564,23 +1459,6 @@
     (UINT64)(((UINT64)(x) & (UINT64) 0x00ff000000000000ULL) >> 40) | \
     (UINT64)(((UINT64)(x) & (UINT64) 0xff00000000000000ULL) >> 56) ))
 
-#ifdef RT_BIG_ENDIAN
-
-#define cpu2le64(x) SWAP64((x))
-#define le2cpu64(x) SWAP64((x))
-#define cpu2le32(x) SWAP32((x))
-#define le2cpu32(x) SWAP32((x))
-#define cpu2le16(x) SWAP16((x))
-#define le2cpu16(x) SWAP16((x))
-#define cpu2be64(x) ((UINT64)(x))
-#define be2cpu64(x) ((UINT64)(x))
-#define cpu2be32(x) ((UINT32)(x))
-#define be2cpu32(x) ((UINT32)(x))
-#define cpu2be16(x) ((UINT16)(x))
-#define be2cpu16(x) ((UINT16)(x))
-
-#else   // Little_Endian
-
 #define cpu2le64(x) ((UINT64)(x))
 #define le2cpu64(x) ((UINT64)(x))
 #define cpu2le32(x) ((UINT32)(x))
@@ -1594,8 +1472,6 @@
 #define cpu2be16(x) SWAP16((x))
 #define be2cpu16(x) SWAP16((x))
 
-#endif  // RT_BIG_ENDIAN
-
 #endif  // __RTMP_DEF_H__
 
 
diff --git a/drivers/staging/rt2860/spectrum.h b/drivers/staging/rt2860/spectrum.h
index 60f25dbdba9..0a878ba81b4 100644
--- a/drivers/staging/rt2860/spectrum.h
+++ b/drivers/staging/rt2860/spectrum.h
@@ -46,16 +46,6 @@ typedef struct PACKED _CH_SW_ANN_INFO
 
 typedef union PACKED _MEASURE_REQ_MODE
 {
-#ifdef RT_BIG_ENDIAN
-	struct PACKED
-	{
-		UINT8 Rev1:4;
-		UINT8 Report:1;
-		UINT8 Request:1;
-		UINT8 Enable:1;
-		UINT8 Rev0:1;
-	} field;
-#else
 	struct PACKED
 	{
 		UINT8 Rev0:1;
@@ -64,7 +54,6 @@ typedef union PACKED _MEASURE_REQ_MODE
 		UINT8 Report:1;
 		UINT8 Rev1:4;
 	} field;
-#endif // RT_BIG_ENDIAN //
 	UINT8 word;
 } MEASURE_REQ_MODE, *PMEASURE_REQ_MODE;
 
@@ -85,17 +74,6 @@ typedef struct PACKED _MEASURE_REQ_INFO
 
 typedef union PACKED _MEASURE_BASIC_REPORT_MAP
 {
-#ifdef RT_BIG_ENDIAN
-	struct PACKED
-	{
-		UINT8 Rev:3;
-		UINT8 Unmeasure:1;
-		UINT8 Radar:1;
-		UINT8 UnidentifiedSignal:1;
-		UINT8 OfdmPreamble:1;
-		UINT8 BSS:1;
-	} field;
-#else
 	struct PACKED
 	{
 		UINT8 BSS:1;
@@ -105,7 +83,6 @@ typedef union PACKED _MEASURE_BASIC_REPORT_MAP
 		UINT8 Unmeasure:1;
 		UINT8 Rev:3;
 	} field;
-#endif // RT_BIG_ENDIAN //
 	UINT8 word;
 } MEASURE_BASIC_REPORT_MAP, *PMEASURE_BASIC_REPORT_MAP;
 
@@ -137,17 +114,10 @@ typedef union PACKED _MEASURE_REPORT_MODE
 {
 	struct PACKED
 	{
-#ifdef RT_BIG_ENDIAN
-		UINT8 Rev:5;
-		UINT8 Refused:1;
-		UINT8 Incapable:1;
-		UINT8 Late:1;
-#else
 		UINT8 Late:1;
 		UINT8 Incapable:1;
 		UINT8 Refused:1;
 		UINT8 Rev:5;
-#endif // RT_BIG_ENDIAN //
 	} field;
 	UINT8 word;
 } MEASURE_REPORT_MODE, *PMEASURE_REPORT_MODE;
diff --git a/drivers/staging/rt2860/sta/assoc.c b/drivers/staging/rt2860/sta/assoc.c
index 34f1c1490f4..a0734c65bc2 100644
--- a/drivers/staging/rt2860/sta/assoc.c
+++ b/drivers/staging/rt2860/sta/assoc.c
@@ -341,7 +341,6 @@ VOID MlmeAssocReqAction(
 			FrameLen += tmp;
 		}
 
-#ifdef DOT11_N_SUPPORT
 		// HT
 		if ((pAd->MlmeAux.HtCapabilityLen > 0) && (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
 		{
@@ -360,32 +359,14 @@ VOID MlmeAssocReqAction(
 			}
 			else
 			{
-#ifdef RT_BIG_ENDIAN
-		        HT_CAPABILITY_IE HtCapabilityTmp;
-#endif
-
-#ifndef RT_BIG_ENDIAN
 				MakeOutgoingFrame(pOutBuffer + FrameLen,            &TmpLen,
 							  1,                                &HtCapIe,
 							  1,                                &pAd->MlmeAux.HtCapabilityLen,
 							 pAd->MlmeAux.HtCapabilityLen,          &pAd->MlmeAux.HtCapability,
 							  END_OF_ARGS);
-#else
-                NdisZeroMemory(&HtCapabilityTmp, sizeof(HT_CAPABILITY_IE));
-                NdisMoveMemory(&HtCapabilityTmp, &pAd->MlmeAux.HtCapability, pAd->MlmeAux.HtCapabilityLen);
-        		*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
-        		*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
-
-        		MakeOutgoingFrame(pOutBuffer + FrameLen,         &TmpLen,
-        							1,                           &HtCapIe,
-        							1,                           &pAd->MlmeAux.HtCapabilityLen,
-        							pAd->MlmeAux.HtCapabilityLen,&HtCapabilityTmp,
-        							END_OF_ARGS);
-#endif
 			}
 			FrameLen += TmpLen;
 		}
-#endif // DOT11_N_SUPPORT //
 
 		// add Ralink proprietary IE to inform AP this STA is going to use AGGREGATION or PIGGY-BACK+AGGREGATION
 		// Case I: (Aggregation + Piggy-Back)
@@ -473,6 +454,11 @@ VOID MlmeAssocReqAction(
 				RSNIe = IE_WPA2;
 			}
 
+#ifdef RT30xx
+#ifdef SIOCSIWGENIE
+			if (pAd->StaCfg.WpaSupplicantUP != 1)
+#endif // SIOCSIWGENIE //
+#endif
             RTMPMakeRSNIE(pAd, pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus, BSS0);
 
             // Check for WPA PMK cache list
@@ -499,6 +485,17 @@ VOID MlmeAssocReqAction(
 				}
 			}
 
+#ifdef RT30xx
+#ifdef SIOCSIWGENIE
+			if (pAd->StaCfg.WpaSupplicantUP == 1)
+			{
+				MakeOutgoingFrame(pOutBuffer + FrameLen,    		&tmp,
+		                        	pAd->StaCfg.RSNIE_Len,			pAd->StaCfg.RSN_IE,
+		                        	END_OF_ARGS);
+			}
+			else
+#endif
+#endif
 			{
 				MakeOutgoingFrame(pOutBuffer + FrameLen,    		&tmp,
 				              		1,                              &RSNIe,
@@ -509,6 +506,11 @@ VOID MlmeAssocReqAction(
 
 			FrameLen += tmp;
 
+#ifdef RT30xx
+#ifdef SIOCSIWGENIE
+			if (pAd->StaCfg.WpaSupplicantUP != 1)
+#endif
+#endif
 			{
 	            // Append Variable IE
 	            NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, &RSNIe, 1);
@@ -560,34 +562,6 @@ VOID MlmeAssocReqAction(
 						END_OF_ARGS);
 			FrameLen += tmp;
 
-			//
-			// Add CipherSuite CCKM or LeapTkip if setting.
-			//
-#ifdef LEAP_SUPPORT
-			if (LEAP_CCKM_ON(pAd))
-			{
-				MakeOutgoingFrame(pOutBuffer + FrameLen,	&tmp,
-						CipherSuiteCiscoCCKMLen,		CipherSuiteCiscoCCKM,
-						END_OF_ARGS);
-				FrameLen += tmp;
-
-				// Third add RSN
-				NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, CipherSuiteCiscoCCKM, CipherSuiteCiscoCCKMLen); //Save CipherSuite
-				VarIesOffset += CipherSuiteCiscoCCKMLen;
-			}
-			else if ((pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP) && (pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled))
-			{
-				MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp,
-						CipherSuiteCCXTkipLen,	    CipherSuiteCCXTkip,
-						END_OF_ARGS);
-				FrameLen += tmp;
-
-				// Third add RSN
-				NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, CipherSuiteCCXTkip, CipherSuiteCCXTkipLen);
-				VarIesOffset += CipherSuiteCCXTkipLen;
-			}
-#endif // LEAP_SUPPORT //
-
 			// Add by James 03/06/27
 			// Set Variable IEs Length
 			pAd->StaCfg.ReqVarIELen = VarIesOffset;
@@ -647,23 +621,6 @@ VOID MlmeReassocReqAction(
 	NDIS_STATUS		NStatus;
 	ULONG			tmp;
 	PUCHAR			pOutBuffer = NULL;
-//CCX 2.X
-#ifdef LEAP_SUPPORT
-	UCHAR			CkipFlag;
-	UCHAR			CkipNegotiationBuffer[CKIP_NEGOTIATION_LENGTH];
-	UCHAR			AironetCkipIe = IE_AIRONET_CKIP;
-	UCHAR			AironetCkipLen = CKIP_NEGOTIATION_LENGTH;
-	UCHAR			AironetIPAddressIE = IE_AIRONET_IPADDRESS;
-	UCHAR			AironetIPAddressLen = AIRONET_IPADDRESS_LENGTH;
-	UCHAR			AironetIPAddressBuffer[AIRONET_IPADDRESS_LENGTH] = {0x00, 0x40, 0x96, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00};
-	UCHAR			AironetCCKMReassocIE = IE_AIRONET_CCKMREASSOC;
-	UCHAR			AironetCCKMReassocLen = AIRONET_CCKMREASSOC_LENGTH;
-	UCHAR			AironetCCKMReassocBuffer[AIRONET_CCKMREASSOC_LENGTH];
-	UCHAR			AironetOUI[] = {0x00, 0x40, 0x96, 0x00};
-	UCHAR			MICMN[16];
-	UCHAR			CalcMicBuffer[80];
-	ULONG			CalcMicBufferLen = 0;
-#endif // LEAP_SUPPORT //
 	USHORT			Status;
 
 	// Block all authentication request durning WPA block period
@@ -738,7 +695,6 @@ VOID MlmeReassocReqAction(
 			FrameLen += tmp;
 		}
 
-#ifdef DOT11_N_SUPPORT
 		// HT
 		if ((pAd->MlmeAux.HtCapabilityLen > 0) && (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
 		{
@@ -765,7 +721,6 @@ VOID MlmeReassocReqAction(
 			}
 			FrameLen += TmpLen;
 		}
-#endif // DOT11_N_SUPPORT //
 
 		// add Ralink proprietary IE to inform AP this STA is going to use AGGREGATION or PIGGY-BACK+AGGREGATION
 		// Case I: (Aggregation + Piggy-Back)
@@ -805,73 +760,6 @@ VOID MlmeReassocReqAction(
 							  END_OF_ARGS);
 			FrameLen += TmpLen;
 		}
-#ifdef LEAP_SUPPORT
-		if (LEAP_CCKM_ON(pAd) && (pAd->StaCfg.CCKMLinkUpFlag == TRUE))
-		{
-			CkipFlag = pAd->StaCfg.CkipFlag;	// We have update that at PeerBeaconAtJoinRequest()
-			if (CkipFlag != 0)
-			{
-				NdisZeroMemory(CkipNegotiationBuffer, CKIP_NEGOTIATION_LENGTH);
-				CkipNegotiationBuffer[2] = 0x66;
-				// Make it try KP & MIC, since we have to follow the result from AssocRsp
-				CkipNegotiationBuffer[8] = 0x18;
-				CkipNegotiationBuffer[CKIP_NEGOTIATION_LENGTH - 1] = 0x22;
-
-				MakeOutgoingFrame(pOutBuffer + FrameLen,            &tmp,
-									1,                              &AironetCkipIe,
-									1,                              &AironetCkipLen,
-									AironetCkipLen,                 CkipNegotiationBuffer,
-									END_OF_ARGS);
-				FrameLen += tmp;
-			}
-
-			MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp,
-							1,                              &AironetIPAddressIE,
-							1,                              &AironetIPAddressLen,
-							AironetIPAddressLen,            AironetIPAddressBuffer,
-							END_OF_ARGS);
-			FrameLen += tmp;
-
-			//
-			// The RN is incremented before each reassociation request.
-			//
-			pAd->StaCfg.CCKMRN++;
-			//
-			// Calculate MIC = hmac-md5(krk, STA-ID|BSSID|RSNIE|TSF|RN);
-			//
-			COPY_MAC_ADDR(CalcMicBuffer, pAd->CurrentAddress);
-			CalcMicBufferLen = MAC_ADDR_LEN;
-			COPY_MAC_ADDR(CalcMicBuffer + CalcMicBufferLen, pAd->MlmeAux.Bssid);
-			CalcMicBufferLen += MAC_ADDR_LEN;
-			NdisMoveMemory(CalcMicBuffer + CalcMicBufferLen, CipherSuiteCiscoCCKM, CipherSuiteCiscoCCKMLen);
-			CalcMicBufferLen += CipherSuiteCiscoCCKMLen;
-			NdisMoveMemory(CalcMicBuffer + CalcMicBufferLen, (PUCHAR) &pAd->StaCfg.CCKMBeaconAtJoinTimeStamp, sizeof(pAd->StaCfg.CCKMBeaconAtJoinTimeStamp));
-			CalcMicBufferLen += sizeof(pAd->StaCfg.CCKMBeaconAtJoinTimeStamp);
-			NdisMoveMemory(CalcMicBuffer + CalcMicBufferLen, (PUCHAR)&pAd->StaCfg.CCKMRN, sizeof(pAd->StaCfg.CCKMRN));
-			CalcMicBufferLen += sizeof(pAd->StaCfg.CCKMRN);
-			hmac_md5(pAd->StaCfg.KRK, LEN_EAP_MICK, CalcMicBuffer, CalcMicBufferLen, MICMN);
-
-			//
-			// fill up CCKM reassociation request element
-			//
-			NdisMoveMemory(AironetCCKMReassocBuffer, AironetOUI, 4);
-			NdisMoveMemory(AironetCCKMReassocBuffer + 4, (PUCHAR)&pAd->StaCfg.CCKMBeaconAtJoinTimeStamp, 8);
-			NdisMoveMemory(AironetCCKMReassocBuffer + 12, (PUCHAR) &pAd->StaCfg.CCKMRN, 4);
-			NdisMoveMemory(AironetCCKMReassocBuffer +16, MICMN, 8);
-
-			MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp,
-							1,                      &AironetCCKMReassocIE,
-							1,                      &AironetCCKMReassocLen,
-							AironetCCKMReassocLen,  AironetCCKMReassocBuffer,
-							END_OF_ARGS);
-			FrameLen += tmp;
-
-			MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp,
-							CipherSuiteCiscoCCKMLen,CipherSuiteCiscoCCKM,
-							END_OF_ARGS);
-			FrameLen += tmp;
-		}
-#endif // LEAP_SUPPORT //
 
 		// Add CCX v2 request if CCX2 admin state is on
 		if (pAd->StaCfg.CCXControl.field.Enable == 1)
@@ -927,36 +815,6 @@ VOID MlmeDisassocReqAction(
 	ULONG                 Timeout = 0;
 	USHORT                Status;
 
-#ifdef QOS_DLS_SUPPORT
-	// send DLS-TEAR_DOWN message,
-	if (pAd->CommonCfg.bDLSCapable)
-	{
-		UCHAR i;
-
-		// tear down local dls table entry
-		for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-		{
-			if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
-			{
-				RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
-				pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-				pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-			}
-		}
-
-		// tear down peer dls table entry
-		for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
-		{
-			if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
-			{
-				RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
-				pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
-				pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-			}
-		}
-	}
-#endif // QOS_DLS_SUPPORT //
-
 	// skip sanity check
 	pDisassocReq = (PMLME_DISASSOC_REQ_STRUCT)(Elem->Msg);
 
@@ -999,27 +857,11 @@ VOID MlmeDisassocReqAction(
 	RTMPSetTimer(&pAd->MlmeAux.DisassocTimer, Timeout); /* in mSec */
 	pAd->Mlme.AssocMachine.CurrState = DISASSOC_WAIT_RSP;
 
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-    if (pAd->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
-	{
-        union iwreq_data    wrqu;
-        //send disassociate event to wpa_supplicant
-        memset(&wrqu, 0, sizeof(wrqu));
-        wrqu.data.flags = RT_DISASSOC_EVENT_FLAG;
-        wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL);
-    }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
     {
         union iwreq_data    wrqu;
         memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN);
         wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
     }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-
 }
 
 /*
@@ -1057,31 +899,15 @@ VOID PeerAssocRspAction(
 		if(MAC_ADDR_EQUAL(Addr2, pAd->MlmeAux.Bssid))
 		{
 			DBGPRINT(RT_DEBUG_TRACE, ("PeerAssocRspAction():ASSOC - receive ASSOC_RSP to me (status=%d)\n", Status));
-#ifdef DOT11_N_SUPPORT
 			DBGPRINT(RT_DEBUG_TRACE, ("PeerAssocRspAction():MacTable [%d].AMsduSize = %d. ClientStatusFlags = 0x%lx \n",Elem->Wcid, pAd->MacTab.Content[BSSID_WCID].AMsduSize, pAd->MacTab.Content[BSSID_WCID].ClientStatusFlags));
-#endif // DOT11_N_SUPPORT //
 			RTMPCancelTimer(&pAd->MlmeAux.AssocTimer, &TimerCancelled);
 			if(Status == MLME_SUCCESS)
 			{
+#ifdef RT2860
 				// go to procedure listed on page 376
 				AssocPostProc(pAd, Addr2, CapabilityInfo, Aid, SupRate, SupRateLen, ExtRate, ExtRateLen,
 					&EdcaParm, &HtCapability, HtCapabilityLen, &AddHtInfo);
 
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-                if (pAd->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
-                {
-                    union iwreq_data    wrqu;
-
-                    SendAssocIEsToWpaSupplicant(pAd);
-                    memset(&wrqu, 0, sizeof(wrqu));
-                    wrqu.data.flags = RT_ASSOC_EVENT_FLAG;
-                    wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL);
-                }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
                 {
                     union iwreq_data    wrqu;
                     wext_notify_event_assoc(pAd);
@@ -1091,9 +917,29 @@ VOID PeerAssocRspAction(
                     wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
 
                 }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
+#endif
+#ifdef RT2870
+				UCHAR			MaxSupportedRateIn500Kbps = 0;
+				UCHAR			idx;
 
+				// supported rates array may not be sorted. sort it and find the maximum rate
+			    for (idx=0; idx<SupRateLen; idx++)
+                {
+			        if (MaxSupportedRateIn500Kbps < (SupRate[idx] & 0x7f))
+			            MaxSupportedRateIn500Kbps = SupRate[idx] & 0x7f;
+			    }
+
+				for (idx=0; idx<ExtRateLen; idx++)
+			    {
+			        if (MaxSupportedRateIn500Kbps < (ExtRate[idx] & 0x7f))
+			            MaxSupportedRateIn500Kbps = ExtRate[idx] & 0x7f;
+                }
+				// go to procedure listed on page 376
+				AssocPostProc(pAd, Addr2, CapabilityInfo, Aid, SupRate, SupRateLen, ExtRate, ExtRateLen,
+					&EdcaParm, &HtCapability, HtCapabilityLen, &AddHtInfo);
 
+				StaAddMacTableEntry(pAd, &pAd->MacTab.Content[BSSID_WCID], MaxSupportedRateIn500Kbps, &HtCapability, HtCapabilityLen, CapabilityInfo);
+#endif
 				pAd->StaCfg.CkipFlag = CkipFlag;
 				if (CkipFlag & 0x18)
 				{
@@ -1109,14 +955,6 @@ VOID PeerAssocRspAction(
 			}
 			else
 			{
-				// Faile on Association, we need to check the status code
-				// Is that a Rogue AP?
-#ifdef LEAP_SUPPORT
-				if ((pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP) && (Status == MLME_ALG_NOT_SUPPORT))
-				{ //Possibly Rogue AP
-					RogueApTableSetEntry(pAd, &pAd->StaCfg.RogueApTab, pAd->MlmeAux.Bssid, LEAP_REASON_INVALID_AUTH);
-				}
-#endif // LEAP_SUPPORT //
 			}
 			pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
 			MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_ASSOC_CONF, 2, &Status);
@@ -1172,21 +1010,6 @@ VOID PeerReassocRspAction(
 				AssocPostProc(pAd, Addr2, CapabilityInfo, Aid, SupRate, SupRateLen, ExtRate, ExtRateLen,
 					 &EdcaParm, &HtCapability, HtCapabilityLen, &AddHtInfo);
 
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-                if (pAd->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
-                {
-                    union iwreq_data    wrqu;
-
-                    SendAssocIEsToWpaSupplicant(pAd);
-                    memset(&wrqu, 0, sizeof(wrqu));
-                    wrqu.data.flags = RT_ASSOC_EVENT_FLAG;
-                    wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL);
-                }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
                 {
                     union iwreq_data    wrqu;
                     wext_notify_event_assoc(pAd);
@@ -1196,41 +1019,9 @@ VOID PeerReassocRspAction(
                     wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
 
                 }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
 
 			}
 
-			//
-			// Cisco Leap CCKM supported Re-association.
-			//
-#ifdef LEAP_SUPPORT
-			if (LEAP_CCKM_ON(pAd) && (pAd->StaCfg.CCKMLinkUpFlag == TRUE))
-			{
-				if (CCKMAssocRspSanity(pAd, Elem->Msg, Elem->MsgLen) == TRUE)
-				{
-					pAd->StaCfg.CkipFlag = CkipFlag;
-					if (CkipFlag & 0x18)
-					{
-						NdisZeroMemory(pAd->StaCfg.TxSEQ, 4);
-						NdisZeroMemory(pAd->StaCfg.RxSEQ, 4);
-						NdisZeroMemory(pAd->StaCfg.CKIPMIC, 4);
-						pAd->StaCfg.GIV[0] = RandomByte(pAd);
-						pAd->StaCfg.GIV[1] = RandomByte(pAd);
-						pAd->StaCfg.GIV[2] = RandomByte(pAd);
-						pAd->StaCfg.bCkipOn = TRUE;
-						DBGPRINT(RT_DEBUG_TRACE, ("<CCX> pAd->StaCfg.CkipFlag = 0x%02x\n", pAd->StaCfg.CkipFlag));
-					}
-
-					pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-					MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_REASSOC_CONF, 2, &Status);
-				}
-				else
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - CCKMAssocRspSanity() sanity check fail\n"));
-				}
-			}
-			else
-#endif // LEAP_SUPPORT //
 			{
 				// CkipFlag is no use for reassociate
 				pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
@@ -1275,7 +1066,7 @@ VOID AssocPostProc(
 	COPY_MAC_ADDR(pAd->MlmeAux.Bssid, pAddr2);
 	pAd->MlmeAux.Aid = Aid;
 	pAd->MlmeAux.CapabilityInfo = CapabilityInfo & SUPPORTED_CAPABILITY_INFO;
-#ifdef DOT11_N_SUPPORT
+
 	// Some HT AP might lost WMM IE. We add WMM ourselves. beacuase HT requires QoS on.
 	if ((HtCapabilityLen > 0) && (pEdcaParm->bValid == FALSE))
 	{
@@ -1301,7 +1092,6 @@ VOID AssocPostProc(
 		pEdcaParm->Txop[3]  = 48;
 
 	}
-#endif // DOT11_N_SUPPORT //
 
 	NdisMoveMemory(&pAd->MlmeAux.APEdcaParm, pEdcaParm, sizeof(EDCA_PARM));
 
@@ -1315,7 +1105,6 @@ VOID AssocPostProc(
 	NdisMoveMemory(pAd->MlmeAux.ExtRate, ExtRate, ExtRateLen);
 	RTMPCheckRates(pAd, pAd->MlmeAux.ExtRate, &pAd->MlmeAux.ExtRateLen);
 
-#ifdef DOT11_N_SUPPORT
 	if (HtCapabilityLen > 0)
 	{
 		RTMPCheckHt(pAd, BSSID_WCID, pHtCapability, pAddHtInfo);
@@ -1324,7 +1113,6 @@ VOID AssocPostProc(
 
 	DBGPRINT(RT_DEBUG_TRACE, ("AssocPostProc===>    (Mmps=%d, AmsduSize=%d, )\n",
 		pAd->MacTab.Content[BSSID_WCID].MmpsMode, pAd->MacTab.Content[BSSID_WCID].AMsduSize));
-#endif // DOT11_N_SUPPORT //
 
 	// Set New WPA information
 	Idx = BssTableSearch(&pAd->ScanTab, pAddr2, pAd->MlmeAux.Channel);
@@ -1414,21 +1202,6 @@ VOID PeerDisassocAction(
 				RTMPSendWirelessEvent(pAd, IW_DISASSOC_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
 			}
 
-
-#ifdef LEAP_SUPPORT
-			if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-			{
-				// Cisco_LEAP has start a timer
-				// We should cancel it if using LEAP
-				RTMPCancelTimer(&pAd->StaCfg.LeapAuthTimer, &TimerCancelled);
-				//Check is it mach the LEAP Authentication failed as possible a Rogue AP
-				//on it's PortSecured not equal to WPA_802_1X_PORT_SECURED while process the Association.
-				if ((pAd->Mlme.LeapMachine.CurrState != LEAP_IDLE) && (pAd->StaCfg.PortSecured != WPA_802_1X_PORT_SECURED))
-				{
-					RogueApTableSetEntry(pAd, &pAd->StaCfg.RogueApTab, Addr2, LEAP_REASON_AUTH_TIMEOUT);
-				}
-			}
-#endif	// LEAP_SUPPORT //
 			//
 			// Get Current System time and Turn on AdjacentAPReport
 			//
@@ -1437,26 +1210,11 @@ VOID PeerDisassocAction(
 			LinkDown(pAd, TRUE);
 			pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
 
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-            if (pAd->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
-			{
-                union iwreq_data    wrqu;
-                //send disassociate event to wpa_supplicant
-                memset(&wrqu, 0, sizeof(wrqu));
-                wrqu.data.flags = RT_DISASSOC_EVENT_FLAG;
-                wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL);
-            }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
             {
                 union iwreq_data    wrqu;
                 memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN);
                 wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
             }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
 		}
 	}
 	else
@@ -1739,36 +1497,6 @@ VOID SwitchBetweenWepAndCkip(
 	}
 }
 
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-VOID    SendAssocIEsToWpaSupplicant(
-    IN  PRTMP_ADAPTER pAd)
-{
-    union iwreq_data    wrqu;
-    unsigned char custom[IW_CUSTOM_MAX] = {0};
-
-    if ((pAd->StaCfg.ReqVarIELen + 17) <= IW_CUSTOM_MAX)
-    {
-        sprintf(custom, "ASSOCINFO_ReqIEs=");
-	    NdisMoveMemory(custom+17, pAd->StaCfg.ReqVarIEs, pAd->StaCfg.ReqVarIELen);
-	    memset(&wrqu, 0, sizeof(wrqu));
-        wrqu.data.length = pAd->StaCfg.ReqVarIELen + 17;
-        wrqu.data.flags = RT_REQIE_EVENT_FLAG;
-        wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, custom);
-
-        memset(&wrqu, 0, sizeof(wrqu));
-        wrqu.data.flags = RT_ASSOCINFO_EVENT_FLAG;
-        wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL);
-    }
-    else
-        DBGPRINT(RT_DEBUG_TRACE, ("pAd->StaCfg.ReqVarIELen + 17 > MAX_CUSTOM_LEN\n"));
-
-    return;
-}
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
 int wext_notify_event_assoc(
 	IN  RTMP_ADAPTER *pAd)
 {
@@ -1791,7 +1519,7 @@ int wext_notify_event_assoc(
         wrqu.data.length = (pAd->StaCfg.ReqVarIELen*2) + 17;
         sprintf(custom, "ASSOCINFO(ReqIEs=");
         for (idx=0; idx<pAd->StaCfg.ReqVarIELen; idx++)
-                sprintf(custom, "%s%02x", custom, pAd->StaCfg.ReqVarIEs[idx]);
+                sprintf(custom + strlen(custom), "%02x", pAd->StaCfg.ReqVarIEs[idx]);
         wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, custom);
     }
     else
@@ -1801,5 +1529,227 @@ int wext_notify_event_assoc(
 	return 0;
 
 }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
 
+#ifdef RT2870
+BOOLEAN StaAddMacTableEntry(
+	IN  PRTMP_ADAPTER		pAd,
+	IN  PMAC_TABLE_ENTRY	pEntry,
+	IN  UCHAR				MaxSupportedRateIn500Kbps,
+	IN  HT_CAPABILITY_IE	*pHtCapability,
+	IN  UCHAR				HtCapabilityLen,
+	IN  USHORT        		CapabilityInfo)
+{
+	UCHAR            MaxSupportedRate = RATE_11;
+
+	if (ADHOC_ON(pAd))
+		CLIENT_STATUS_CLEAR_FLAG(pEntry, fCLIENT_STATUS_WMM_CAPABLE);
+
+	switch (MaxSupportedRateIn500Kbps)
+    {
+        case 108: MaxSupportedRate = RATE_54;   break;
+        case 96:  MaxSupportedRate = RATE_48;   break;
+        case 72:  MaxSupportedRate = RATE_36;   break;
+        case 48:  MaxSupportedRate = RATE_24;   break;
+        case 36:  MaxSupportedRate = RATE_18;   break;
+        case 24:  MaxSupportedRate = RATE_12;   break;
+        case 18:  MaxSupportedRate = RATE_9;    break;
+        case 12:  MaxSupportedRate = RATE_6;    break;
+        case 22:  MaxSupportedRate = RATE_11;   break;
+        case 11:  MaxSupportedRate = RATE_5_5;  break;
+        case 4:   MaxSupportedRate = RATE_2;    break;
+        case 2:   MaxSupportedRate = RATE_1;    break;
+        default:  MaxSupportedRate = RATE_11;   break;
+    }
+
+    if ((pAd->CommonCfg.PhyMode == PHY_11G) && (MaxSupportedRate < RATE_FIRST_OFDM_RATE))
+        return FALSE;
+
+	// 11n only
+	if (((pAd->CommonCfg.PhyMode == PHY_11N_2_4G) || (pAd->CommonCfg.PhyMode == PHY_11N_5G))&& (HtCapabilityLen == 0))
+		return FALSE;
+
+	if (!pEntry)
+        return FALSE;
+
+	NdisAcquireSpinLock(&pAd->MacTabLock);
+	if (pEntry)
+	{
+		pEntry->PortSecured = WPA_802_1X_PORT_SECURED;
+		if ((MaxSupportedRate < RATE_FIRST_OFDM_RATE) ||
+			(pAd->CommonCfg.PhyMode == PHY_11B))
+		{
+			pEntry->RateLen = 4;
+			if (MaxSupportedRate >= RATE_FIRST_OFDM_RATE)
+				MaxSupportedRate = RATE_11;
+		}
+		else
+			pEntry->RateLen = 12;
+
+		pEntry->MaxHTPhyMode.word = 0;
+		pEntry->MinHTPhyMode.word = 0;
+		pEntry->HTPhyMode.word = 0;
+		pEntry->MaxSupportedRate = MaxSupportedRate;
+		if (pEntry->MaxSupportedRate < RATE_FIRST_OFDM_RATE)
+		{
+			pEntry->MaxHTPhyMode.field.MODE = MODE_CCK;
+			pEntry->MaxHTPhyMode.field.MCS = pEntry->MaxSupportedRate;
+			pEntry->MinHTPhyMode.field.MODE = MODE_CCK;
+			pEntry->MinHTPhyMode.field.MCS = pEntry->MaxSupportedRate;
+			pEntry->HTPhyMode.field.MODE = MODE_CCK;
+			pEntry->HTPhyMode.field.MCS = pEntry->MaxSupportedRate;
+		}
+		else
+		{
+			pEntry->MaxHTPhyMode.field.MODE = MODE_OFDM;
+			pEntry->MaxHTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
+			pEntry->MinHTPhyMode.field.MODE = MODE_OFDM;
+			pEntry->MinHTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
+			pEntry->HTPhyMode.field.MODE = MODE_OFDM;
+			pEntry->HTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
+		}
+		pEntry->CapabilityInfo = CapabilityInfo;
+		CLIENT_STATUS_CLEAR_FLAG(pEntry, fCLIENT_STATUS_AGGREGATION_CAPABLE);
+		CLIENT_STATUS_CLEAR_FLAG(pEntry, fCLIENT_STATUS_PIGGYBACK_CAPABLE);
+	}
+
+	// If this Entry supports 802.11n, upgrade to HT rate.
+	if ((HtCapabilityLen != 0) && (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
+	{
+		UCHAR	j, bitmask; //k,bitmask;
+		CHAR    i;
+
+		if (ADHOC_ON(pAd))
+			CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_WMM_CAPABLE);
+		if ((pHtCapability->HtCapInfo.GF) && (pAd->CommonCfg.DesiredHtPhy.GF))
+		{
+			pEntry->MaxHTPhyMode.field.MODE = MODE_HTGREENFIELD;
+		}
+		else
+		{
+			pEntry->MaxHTPhyMode.field.MODE = MODE_HTMIX;
+			pAd->MacTab.fAnyStationNonGF = TRUE;
+			pAd->CommonCfg.AddHTInfo.AddHtInfo2.NonGfPresent = 1;
+		}
+
+		if ((pHtCapability->HtCapInfo.ChannelWidth) && (pAd->CommonCfg.DesiredHtPhy.ChannelWidth))
+		{
+			pEntry->MaxHTPhyMode.field.BW= BW_40;
+			pEntry->MaxHTPhyMode.field.ShortGI = ((pAd->CommonCfg.DesiredHtPhy.ShortGIfor40)&(pHtCapability->HtCapInfo.ShortGIfor40));
+		}
+		else
+		{
+			pEntry->MaxHTPhyMode.field.BW = BW_20;
+			pEntry->MaxHTPhyMode.field.ShortGI = ((pAd->CommonCfg.DesiredHtPhy.ShortGIfor20)&(pHtCapability->HtCapInfo.ShortGIfor20));
+			pAd->MacTab.fAnyStation20Only = TRUE;
+		}
+
+		// 3*3
+		if (pAd->MACVersion >= RALINK_2883_VERSION && pAd->MACVersion < RALINK_3070_VERSION)
+			pEntry->MaxHTPhyMode.field.TxBF = pAd->CommonCfg.RegTransmitSetting.field.TxBF;
+
+		// find max fixed rate
+		for (i=23; i>=0; i--) // 3*3
+		{
+			j = i/8;
+			bitmask = (1<<(i-(j*8)));
+			if ((pAd->StaCfg.DesiredHtPhyInfo.MCSSet[j] & bitmask) && (pHtCapability->MCSSet[j] & bitmask))
+			{
+				pEntry->MaxHTPhyMode.field.MCS = i;
+				break;
+			}
+			if (i==0)
+				break;
+		}
+
+
+		if (pAd->StaCfg.DesiredTransmitSetting.field.MCS != MCS_AUTO)
+		{
+			if (pAd->StaCfg.DesiredTransmitSetting.field.MCS == 32)
+			{
+				// Fix MCS as HT Duplicated Mode
+				pEntry->MaxHTPhyMode.field.BW = 1;
+				pEntry->MaxHTPhyMode.field.MODE = MODE_HTMIX;
+				pEntry->MaxHTPhyMode.field.STBC = 0;
+				pEntry->MaxHTPhyMode.field.ShortGI = 0;
+				pEntry->MaxHTPhyMode.field.MCS = 32;
+			}
+			else if (pEntry->MaxHTPhyMode.field.MCS > pAd->StaCfg.HTPhyMode.field.MCS)
+			{
+				// STA supports fixed MCS
+				pEntry->MaxHTPhyMode.field.MCS = pAd->StaCfg.HTPhyMode.field.MCS;
+			}
+		}
+
+		pEntry->MaxHTPhyMode.field.STBC = (pHtCapability->HtCapInfo.RxSTBC & (pAd->CommonCfg.DesiredHtPhy.TxSTBC));
+		pEntry->MpduDensity = pHtCapability->HtCapParm.MpduDensity;
+		pEntry->MaxRAmpduFactor = pHtCapability->HtCapParm.MaxRAmpduFactor;
+		pEntry->MmpsMode = (UCHAR)pHtCapability->HtCapInfo.MimoPs;
+		pEntry->AMsduSize = (UCHAR)pHtCapability->HtCapInfo.AMsduSize;
+		pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word;
+
+		if (pAd->CommonCfg.DesiredHtPhy.AmsduEnable && (pAd->CommonCfg.REGBACapability.field.AutoBA == FALSE))
+			CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_AMSDU_INUSED);
+		if (pHtCapability->HtCapInfo.ShortGIfor20)
+			CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI20_CAPABLE);
+		if (pHtCapability->HtCapInfo.ShortGIfor40)
+			CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI40_CAPABLE);
+		if (pHtCapability->HtCapInfo.TxSTBC)
+			CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_TxSTBC_CAPABLE);
+		if (pHtCapability->HtCapInfo.RxSTBC)
+			CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RxSTBC_CAPABLE);
+		if (pHtCapability->ExtHtCapInfo.PlusHTC)
+			CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_HTC_CAPABLE);
+		if (pAd->CommonCfg.bRdg && pHtCapability->ExtHtCapInfo.RDGSupport)
+			CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RDG_CAPABLE);
+		if (pHtCapability->ExtHtCapInfo.MCSFeedback == 0x03)
+			CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_MCSFEEDBACK_CAPABLE);
+	}
+	else
+	{
+		pAd->MacTab.fAnyStationIsLegacy = TRUE;
+	}
+
+	NdisMoveMemory(&pEntry->HTCapability, pHtCapability, sizeof(HT_CAPABILITY_IE));
+
+	pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word;
+	pEntry->CurrTxRate = pEntry->MaxSupportedRate;
+
+	// Set asic auto fall back
+	if (pAd->StaCfg.bAutoTxRateSwitch == TRUE)
+	{
+		PUCHAR					pTable;
+		UCHAR					TableSize = 0;
+
+		MlmeSelectTxRateTable(pAd, pEntry, &pTable, &TableSize, &pEntry->CurrTxRateIndex);
+		pEntry->bAutoTxRateSwitch = TRUE;
+	}
+	else
+	{
+		pEntry->HTPhyMode.field.MODE	= pAd->StaCfg.HTPhyMode.field.MODE;
+		pEntry->HTPhyMode.field.MCS	= pAd->StaCfg.HTPhyMode.field.MCS;
+		pEntry->bAutoTxRateSwitch = FALSE;
+
+		// If the legacy mode is set, overwrite the transmit setting of this entry.
+		RTMPUpdateLegacyTxSetting((UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode, pEntry);
+	}
+
+	pEntry->PortSecured = WPA_802_1X_PORT_SECURED;
+	pEntry->Sst = SST_ASSOC;
+	pEntry->AuthState = AS_AUTH_OPEN;
+	pEntry->AuthMode = pAd->StaCfg.AuthMode;
+	pEntry->WepStatus = pAd->StaCfg.WepStatus;
+
+	NdisReleaseSpinLock(&pAd->MacTabLock);
+
+    {
+        union iwreq_data    wrqu;
+        wext_notify_event_assoc(pAd);
+
+        memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN);
+        memcpy(wrqu.ap_addr.sa_data, pAd->MlmeAux.Bssid, MAC_ADDR_LEN);
+        wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
+
+    }
+	return TRUE;
+}
+#endif /* RT2870 */
diff --git a/drivers/staging/rt2860/sta/auth.c b/drivers/staging/rt2860/sta/auth.c
index 73fb8d6ea76..d8414eac42f 100644
--- a/drivers/staging/rt2860/sta/auth.c
+++ b/drivers/staging/rt2860/sta/auth.c
@@ -218,15 +218,9 @@ VOID PeerAuthRspAtSeq2Action(
             {
                 // Authentication Mode "LEAP" has allow for CCX 1.X
                 if ((pAd->MlmeAux.Alg == Ndis802_11AuthModeOpen)
-#ifdef LEAP_SUPPORT
-					|| (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-#endif // LEAP_SUPPORT //
 				)
                 {
                     pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
-#ifdef LEAP_SUPPORT
-                    pAd->Mlme.LeapMachine.CurrState = LEAP_IDLE;
-#endif // LEAP_SUPPORT //
                     MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_AUTH_CONF, 2, &Status);
                 }
                 else
@@ -282,14 +276,6 @@ VOID PeerAuthRspAtSeq2Action(
             }
             else
             {
-#ifdef LEAP_SUPPORT
-                if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-                {
-                    //Invalid Authentication possible rogue AP
-                    //Add this Ap to Rogue AP.
-                    RogueApTableSetEntry(pAd, &pAd->StaCfg.RogueApTab, Addr2, LEAP_REASON_INVALID_AUTH);
-				}
-#endif // LEAP_SUPPORT //
                 pAd->StaCfg.AuthFailReason = Status;
                 COPY_MAC_ADDR(pAd->StaCfg.AuthFailSta, Addr2);
                 pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
diff --git a/drivers/staging/rt2860/sta/auth_rsp.c b/drivers/staging/rt2860/sta/auth_rsp.c
index f7aa4b99cf5..cc639b1c6c1 100644
--- a/drivers/staging/rt2860/sta/auth_rsp.c
+++ b/drivers/staging/rt2860/sta/auth_rsp.c
@@ -127,36 +127,17 @@ VOID PeerDeauthAction(
         {
             DBGPRINT(RT_DEBUG_TRACE,("AUTH_RSP - receive DE-AUTH from our AP (Reason=%d)\n", Reason));
 
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
             {
                 union iwreq_data    wrqu;
                 memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN);
                 wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
             }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-
 
 			// send wireless event - for deauthentication
 			if (pAd->CommonCfg.bWirelessEvent)
 				RTMPSendWirelessEvent(pAd, IW_DEAUTH_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
 
             LinkDown(pAd, TRUE);
-
-            // Authentication Mode Cisco_LEAP has start a timer
-            // We should cancel it if using LEAP
-#ifdef LEAP_SUPPORT
-            if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-            {
-                RTMPCancelTimer(&pAd->StaCfg.LeapAuthTimer, &TimerCancelled);
-                //Check is it mach the LEAP Authentication failed as possible a Rogue AP
-                //on it's PortSecured not equal to WPA_802_1X_PORT_SECURED while process the Authenticaton.
-                if ((pAd->StaCfg.PortSecured != WPA_802_1X_PORT_SECURED) && (pAd->Mlme.LeapMachine.CurrState != LEAP_IDLE))
-                {
-                    RogueApTableSetEntry(pAd, &pAd->StaCfg.RogueApTab, Addr2, LEAP_REASON_AUTH_TIMEOUT);
-                }
-            }
-#endif // LEAP_SUPPORT //
         }
     }
     else
diff --git a/drivers/staging/rt2860/sta/connect.c b/drivers/staging/rt2860/sta/connect.c
index d8bcc76688a..ac713518666 100644
--- a/drivers/staging/rt2860/sta/connect.c
+++ b/drivers/staging/rt2860/sta/connect.c
@@ -178,13 +178,6 @@ VOID MlmeCntlMachinePerformAction(
 					pAd->bLedOnScanning = FALSE;
 					RTMPSetLED(pAd, pAd->LedStatus);
 				}
-#ifdef DOT11N_DRAFT3
-				// AP sent a 2040Coexistence mgmt frame, then station perform a scan, and then send back the respone.
-				if (pAd->CommonCfg.BSSCoexist2040.field.InfoReq == 1)
-				{
-					Update2040CoexistFrameAndNotify(pAd, BSSID_WCID, TRUE);
-				}
-#endif // DOT11N_DRAFT3 //
 			}
 			break;
 
@@ -195,6 +188,38 @@ VOID MlmeCntlMachinePerformAction(
 				pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
 			}
 			break;
+#ifdef RT2870
+		//
+		// This state is for that we want to connect to an AP but
+		// it didn't find on BSS List table. So we need to scan the air first,
+		// after that we can try to connect to the desired AP if available.
+		//
+		case CNTL_WAIT_SCAN_FOR_CONNECT:
+			if(Elem->MsgType == MT2_SCAN_CONF)
+			{
+				// Resume TxRing after SCANING complete. We hope the out-of-service time
+				// won't be too long to let upper layer time-out the waiting frames
+				RTMPResumeMsduTransmission(pAd);
+#ifdef CCX_SUPPORT
+				if (pAd->StaCfg.CCXReqType != MSRN_TYPE_UNUSED)
+				{
+					// Cisco scan request is finished, prepare beacon report
+					MlmeEnqueue(pAd, AIRONET_STATE_MACHINE, MT2_AIRONET_SCAN_DONE, 0, NULL);
+				}
+#endif // CCX_SUPPORT //
+				pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
+
+				//
+				// Check if we can connect to.
+				//
+				BssTableSsidSort(pAd, &pAd->MlmeAux.SsidBssTab, pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
+				if (pAd->MlmeAux.SsidBssTab.BssNr > 0)
+				{
+					MlmeAutoReconnectLastSSID(pAd);
+				}
+			}
+			break;
+#endif // RT2870 //
 		default:
 			DBGPRINT_ERR(("!ERROR! CNTL - Illegal message type(=%ld)", Elem->MsgType));
 			break;
@@ -234,19 +259,11 @@ VOID CntlIdleProc(
 			break;
 
 		case OID_802_11_DISASSOCIATE:
-#ifdef RALINK_ATE
-			if(ATE_ON(pAd))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				break;
-			}
-#endif // RALINK_ATE //
 			DisassocParmFill(pAd, &DisassocReq, pAd->CommonCfg.Bssid, REASON_DISASSOC_STA_LEAVING);
 			MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ, sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq);
 			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
-#ifdef WPA_SUPPLICANT_SUPPORT
+
             if (pAd->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_ENABLE_WITH_WEB_UI)
-#endif // WPA_SUPPLICANT_SUPPORT //
             {
     			// Set the AutoReconnectSsid to prevent it reconnect to old SSID
     			// Since calling this indicate user don't want to connect to that SSID anymore.
@@ -263,12 +280,6 @@ VOID CntlIdleProc(
             WpaMicFailureReportFrame(pAd, Elem);
             break;
 
-#ifdef QOS_DLS_SUPPORT
-		case RT_OID_802_11_SET_DLS_PARAM:
-			CntlOidDLSSetupProc(pAd, Elem);
-			break;
-#endif // QOS_DLS_SUPPORT //
-
 		default:
 			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Illegal message in CntlIdleProc(MsgType=%ld)\n",Elem->MsgType));
 			break;
@@ -283,13 +294,6 @@ VOID CntlOidScanProc(
 	ULONG                      BssIdx = BSS_NOT_FOUND;
 	BSS_ENTRY                  CurrBss;
 
-#ifdef RALINK_ATE
-/* Disable scanning when ATE is running. */
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-
 	// record current BSS if network is connected.
 	// 2003-2-13 do not include current IBSS if this is the only STA in this IBSS.
 	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
@@ -337,9 +341,11 @@ VOID CntlOidSsidProc(
 	MLME_DISASSOC_REQ_STRUCT   DisassocReq;
 	ULONG					   Now;
 
+#ifdef RT2860
 	// BBP and RF are not accessible in PS mode, we has to wake them up first
 	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
 		AsicForceWakeup(pAd, RTMP_HALT);
+#endif
 
 	// Step 1. record the desired user settings to MlmeAux
 	NdisZeroMemory(pAd->MlmeAux.Ssid, MAX_LEN_OF_SSID);
@@ -377,9 +383,6 @@ VOID CntlOidSsidProc(
 			 (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
 			 (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) ||
 			 (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)
-#ifdef LEAP_SUPPORT
-			 || (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-#endif // LEAP_SUPPORT //
 			 ) &&
 			(pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
 		{
@@ -420,7 +423,7 @@ VOID CntlOidSsidProc(
 			}
 
 			pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
+
             {
                 union iwreq_data    wrqu;
 
@@ -429,7 +432,6 @@ VOID CntlOidSsidProc(
                 wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
 
             }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
 		}
 	}
 	else if (INFRA_ON(pAd))
@@ -513,12 +515,6 @@ VOID CntlOidRTBssidProc(
 	MLME_DISASSOC_REQ_STRUCT    DisassocReq;
 	MLME_JOIN_REQ_STRUCT        JoinReq;
 
-#ifdef RALINK_ATE
-/* No need to perform this routine when ATE is running. */
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
 	// record user desired settings
 	COPY_MAC_ADDR(pAd->MlmeAux.Bssid, pOidBssid);
 	pAd->MlmeAux.BssType = pAd->StaCfg.BssType;
@@ -558,7 +554,7 @@ VOID CntlOidRTBssidProc(
 		// already connected to the same BSSID, go back to idle state directly
 		DBGPRINT(RT_DEBUG_TRACE, ("CNTL - already in this BSSID. ignore this SET_BSSID request\n"));
 		pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
+
             {
                 union iwreq_data    wrqu;
 
@@ -567,7 +563,6 @@ VOID CntlOidRTBssidProc(
                 wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
 
             }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
 	}
 	else
 	{
@@ -672,113 +667,6 @@ VOID CntlMlmeRoamingProc(
 	IterateOnBssTab(pAd);
 }
 
-#ifdef QOS_DLS_SUPPORT
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID CntlOidDLSSetupProc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	PRT_802_11_DLS		pDLS = (PRT_802_11_DLS)Elem->Msg;
-	MLME_DLS_REQ_STRUCT	MlmeDlsReq;
-	INT					i;
-	USHORT				reason = REASON_UNSPECIFY;
-
-	DBGPRINT(RT_DEBUG_TRACE,("CNTL - (OID set %02x:%02x:%02x:%02x:%02x:%02x with Valid=%d, Status=%d, TimeOut=%d, CountDownTimer=%d)\n",
-		pDLS->MacAddr[0], pDLS->MacAddr[1], pDLS->MacAddr[2], pDLS->MacAddr[3], pDLS->MacAddr[4], pDLS->MacAddr[5],
-		pDLS->Valid, pDLS->Status, pDLS->TimeOut, pDLS->CountDownTimer));
-
-	if (!pAd->CommonCfg.bDLSCapable)
-		return;
-
-	// DLS will not be supported when Adhoc mode
-	if (INFRA_ON(pAd))
-	{
-		for (i = 0; i < MAX_NUM_OF_DLS_ENTRY; i++)
-		{
-			if (pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH) &&
-				(pDLS->TimeOut == pAd->StaCfg.DLSEntry[i].TimeOut) && MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
-			{
-				// 1. Same setting, just drop it
-				DBGPRINT(RT_DEBUG_TRACE,("CNTL - setting unchanged\n"));
-				break;
-			}
-			else if (!pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH) &&
-				MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
-			{
-				// 2. Disable DLS link case, just tear down DLS link
-				reason = REASON_QOS_UNWANTED_MECHANISM;
-				pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-				pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-				DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-				MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-				DBGPRINT(RT_DEBUG_TRACE,("CNTL - start tear down procedure\n"));
-				break;
-			}
-			else if ((i < MAX_NUM_OF_DLS_ENTRY) && pDLS->Valid && !pAd->StaCfg.DLSEntry[i].Valid)
-			{
-				// 3. Enable case, start DLS setup procedure
-				NdisMoveMemory(&pAd->StaCfg.DLSEntry[i], pDLS, sizeof(RT_802_11_DLS_UI));
-
-				//Update countdown timer
-				pAd->StaCfg.DLSEntry[i].CountDownTimer = pAd->StaCfg.DLSEntry[i].TimeOut;
-				DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-				MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_REQ, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-				DBGPRINT(RT_DEBUG_TRACE,("CNTL - DLS setup case\n"));
-				break;
-			}
-			else if ((i < MAX_NUM_OF_DLS_ENTRY) && pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid &&
-				(pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH) && !MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
-			{
-				// 4. update mac case, tear down old DLS and setup new DLS
-				reason = REASON_QOS_UNWANTED_MECHANISM;
-				pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-				pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-				DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-				MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-				NdisMoveMemory(&pAd->StaCfg.DLSEntry[i], pDLS, sizeof(RT_802_11_DLS_UI));
-				DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-				MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_REQ, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-				DBGPRINT(RT_DEBUG_TRACE,("CNTL - DLS tear down and restart case\n"));
-				break;
-			}
-			else if (pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid &&
-				MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr) && (pAd->StaCfg.DLSEntry[i].TimeOut != pDLS->TimeOut))
-			{
-				// 5. update timeout case, start DLS setup procedure (no tear down)
-				pAd->StaCfg.DLSEntry[i].TimeOut	= pDLS->TimeOut;
-				//Update countdown timer
-				pAd->StaCfg.DLSEntry[i].CountDownTimer = pAd->StaCfg.DLSEntry[i].TimeOut;
-				DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-				MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_REQ, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-				DBGPRINT(RT_DEBUG_TRACE,("CNTL - DLS update timeout case\n"));
-				break;
-			}
-			else if (pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid &&
-				(pAd->StaCfg.DLSEntry[i].Status != DLS_FINISH) && MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
-			{
-				// 6. re-setup case, start DLS setup procedure (no tear down)
-				DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-				MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_REQ, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-				DBGPRINT(RT_DEBUG_TRACE,("CNTL - DLS retry setup procedure\n"));
-				break;
-			}
-			else
-			{
-				DBGPRINT(RT_DEBUG_WARN,("CNTL - DLS not changed in entry - %d - Valid=%d, Status=%d, TimeOut=%d\n",
-					i, pAd->StaCfg.DLSEntry[i].Valid, pAd->StaCfg.DLSEntry[i].Status, pAd->StaCfg.DLSEntry[i].TimeOut));
-			}
-		}
-	}
-}
-#endif // QOS_DLS_SUPPORT //
-
 /*
 	==========================================================================
 	Description:
@@ -870,14 +758,6 @@ VOID CntlWaitJoinProc(
 			// 2. joined a new INFRA network, start from authentication
 			else
 			{
-#ifdef LEAP_SUPPORT
-				// Add AuthMode "LEAP" for CCX 1.X
-				if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-				{
-					AuthParmFill(pAd, &AuthReq, pAd->MlmeAux.Bssid, CISCO_AuthModeLEAP);
-				}
-				else
-#endif // LEAP_SUPPORT //
 				{
 					// either Ndis802_11AuthModeShared or Ndis802_11AuthModeAutoSwitch, try shared key first
 					if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeShared) ||
@@ -937,7 +817,7 @@ VOID CntlWaitStartProc(
 				DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Channel=%d, Start adhoc on W53(52,56,60,64) Channels are not accepted\n", pAd->CommonCfg.Channel));
 				return;
 			}
-#ifdef DOT11_N_SUPPORT
+
 			if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
 			{
 				N_ChannelCheck(pAd);
@@ -961,7 +841,6 @@ VOID CntlWaitStartProc(
 				}
 			}
 			else
-#endif // DOT11_N_SUPPORT //
 			{
 				pAd->StaActive.SupportedPhyInfo.bHtEnable = FALSE;
 			}
@@ -974,9 +853,6 @@ VOID CntlWaitStartProc(
 			{
 				pAd->CommonCfg.RadarDetect.RDMode = RD_SILENCE_MODE;
 				pAd->CommonCfg.RadarDetect.RDCount = 0;
-#ifdef DFS_SUPPORT
-				BbpRadarDetectionStart(pAd);
-#endif // DFS_SUPPORT //
 			}
 
 			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - start a new IBSS = %02x:%02x:%02x:%02x:%02x:%02x ...\n",
@@ -1016,21 +892,6 @@ VOID CntlWaitAuthProc(
 			AssocParmFill(pAd, &AssocReq, pAd->MlmeAux.Bssid, pAd->MlmeAux.CapabilityInfo,
 						  ASSOC_TIMEOUT, pAd->StaCfg.DefaultListenCount);
 
-#ifdef LEAP_SUPPORT
-			//
-			// Cisco Leap CCKM supported Re-association.
-			//
-			if (LEAP_CCKM_ON(pAd) && (pAd->StaCfg.CCKMLinkUpFlag == TRUE))
-			{
-				//if CCKM is turn on , that's mean Fast Reauthentication
-				//Use CCKM Reassociation instead of normal association for Fast Roaming.
-				MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_REASSOC_REQ,
-							sizeof(MLME_ASSOC_REQ_STRUCT), &AssocReq);
-
-				pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_REASSOC;
-			}
-			else
-#endif // LEAP_SUPPORT //
 			{
 				MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_ASSOC_REQ,
 							sizeof(MLME_ASSOC_REQ_STRUCT), &AssocReq);
@@ -1044,14 +905,7 @@ VOID CntlWaitAuthProc(
 			// ageing-out. The previous authentication attempt must have let it remove us.
 			// so try Authentication again may help. For D-Link DWL-900AP+ compatibility.
 			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - AUTH FAIL, try again...\n"));
-#ifdef LEAP_SUPPORT
-			//Add AuthMode "LEAP" for CCX 1.X
-			if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-			{
-				AuthParmFill(pAd, &AuthReq, pAd->MlmeAux.Bssid, CISCO_AuthModeLEAP);
-			}
-			else
-#endif // LEAP_SUPPORT //
+
 			{
 				if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeShared) ||
 					(pAd->StaCfg.AuthMode == Ndis802_11AuthModeAutoSwitch))
@@ -1103,20 +957,6 @@ VOID CntlWaitAuthProc2(
 		}
 		else
 		{
-#ifdef LEAP_SUPPORT
-			// Process LEAP first, since it use different control variable
-			// We don't want to affect other poven operation
-			if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-			{
-				// LEAP Auth not success, try next BSS
-				DBGPRINT(RT_DEBUG_TRACE, ("CNTL - *LEAP* AUTH FAIL, give up; try next BSS\n"));
-				DBGPRINT(RT_DEBUG_TRACE, ("Total match BSSID [=%d]\n", pAd->MlmeAux.SsidBssTab.BssNr));
-				pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-				pAd->MlmeAux.BssIdx++;
-				IterateOnBssTab(pAd);
-			}
-			else
-#endif // LEAP_SUPPORT //
 			if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeAutoSwitch) &&
 				 (pAd->MlmeAux.Alg == Ndis802_11AuthModeShared))
 			{
@@ -1205,14 +1045,6 @@ VOID CntlWaitReassocProc(
 			if (pAd->CommonCfg.bWirelessEvent)
 				RTMPSendWirelessEvent(pAd, IW_ASSOC_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
 
-
-#ifdef LEAP_SUPPORT
-			if (LEAP_CCKM_ON(pAd))
-			{
-				STA_PORT_SECURED(pAd);
-				pAd->StaCfg.WpaState = SS_FINISH;
-			}
-#endif // LEAP_SUPPORT //
 			pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
 			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Re-assocition successful on BSS #%ld\n", pAd->MlmeAux.RoamIdx));
 		}
@@ -1226,6 +1058,44 @@ VOID CntlWaitReassocProc(
 	}
 }
 
+
+#ifdef RT2870
+VOID	AdhocTurnOnQos(
+	IN  PRTMP_ADAPTER pAd)
+{
+#define AC0_DEF_TXOP		0
+#define AC1_DEF_TXOP		0
+#define AC2_DEF_TXOP		94
+#define AC3_DEF_TXOP		47
+
+	// Turn on QOs if use HT rate.
+	if (pAd->CommonCfg.APEdcaParm.bValid == FALSE)
+	{
+		pAd->CommonCfg.APEdcaParm.bValid = TRUE;
+		pAd->CommonCfg.APEdcaParm.Aifsn[0] = 3;
+		pAd->CommonCfg.APEdcaParm.Aifsn[1] = 7;
+		pAd->CommonCfg.APEdcaParm.Aifsn[2] = 1;
+		pAd->CommonCfg.APEdcaParm.Aifsn[3] = 1;
+
+		pAd->CommonCfg.APEdcaParm.Cwmin[0] = 4;
+		pAd->CommonCfg.APEdcaParm.Cwmin[1] = 4;
+		pAd->CommonCfg.APEdcaParm.Cwmin[2] = 3;
+		pAd->CommonCfg.APEdcaParm.Cwmin[3] = 2;
+
+		pAd->CommonCfg.APEdcaParm.Cwmax[0] = 10;
+		pAd->CommonCfg.APEdcaParm.Cwmax[1] = 6;
+		pAd->CommonCfg.APEdcaParm.Cwmax[2] = 4;
+		pAd->CommonCfg.APEdcaParm.Cwmax[3] = 3;
+
+		pAd->CommonCfg.APEdcaParm.Txop[0]  = 0;
+		pAd->CommonCfg.APEdcaParm.Txop[1]  = 0;
+		pAd->CommonCfg.APEdcaParm.Txop[2]  = AC2_DEF_TXOP;
+		pAd->CommonCfg.APEdcaParm.Txop[3]  = AC3_DEF_TXOP;
+	}
+	AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm);
+}
+#endif /* RT2870 */
+
 /*
 	==========================================================================
 	Description:
@@ -1244,12 +1114,14 @@ VOID LinkUp(
 	UCHAR	Value = 0, idx;
 	MAC_TABLE_ENTRY *pEntry = NULL, *pCurrEntry;
 
+#ifdef RT2860
 	if (RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND))
 	{
 		RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_HALT);
 		RTMPusecDelay(6000);
 		pAd->bPCIclkOff = FALSE;
 	}
+#endif
 
 	pEntry = &pAd->MacTab.Content[BSSID_WCID];
 
@@ -1266,15 +1138,15 @@ VOID LinkUp(
 
 	COPY_SETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(pAd);
 
-#ifdef DOT11_N_SUPPORT
 	COPY_HTSETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(pAd);
-#endif // DOT11_N_SUPPORT //
+
 	// It's quite difficult to tell if a newly added KEY is WEP or CKIP until a new BSS
 	// is formed (either ASSOC/RE-ASSOC done or IBSS started. LinkUP should be a safe place
 	// to examine if cipher algorithm switching is required.
 	//rt2860b. Don't know why need this
 	SwitchBetweenWepAndCkip(pAd);
 
+#ifdef RT2860
 	// Before power save before link up function, We will force use 1R.
 	// So after link up, check Rx antenna # again.
 	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
@@ -1292,17 +1164,30 @@ VOID LinkUp(
 	}
 	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
 	pAd->StaCfg.BBPR3 = Value;
+#endif /* RT2860 */
 
 	if (BssType == BSS_ADHOC)
 	{
 		OPSTATUS_SET_FLAG(pAd, fOP_STATUS_ADHOC_ON);
 		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_INFRA_ON);
 
-#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier
-		// No carrier detection when adhoc
-		// CarrierDetectionStop(pAd);
-		pAd->CommonCfg.CarrierDetect.CD_State = CD_NORMAL;
-#endif // CARRIER_DETECTION_SUPPORT //
+#ifdef RT30xx
+		if ((pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth  == BW_40) &&
+			(pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset == EXTCHA_ABOVE))
+		{
+			pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel + 2;
+		}
+		else if ((pAd->CommonCfg.Channel > 2) &&
+				 (pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth  == BW_40) &&
+				 (pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset == EXTCHA_BELOW))
+		{
+			pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel - 2;
+		}
+#endif
+#ifdef RT2870
+		if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
+			AdhocTurnOnQos(pAd);
+#endif
 
 		DBGPRINT(RT_DEBUG_TRACE, ("!!!Adhoc LINK UP !!! \n" ));
 	}
@@ -1321,7 +1206,6 @@ VOID LinkUp(
 	Value |= pAd->CommonCfg.RegTransmitSetting.field.TxBF;
 	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value);
 
-#ifdef DOT11_N_SUPPORT
 	// Change to AP channel
     if ((pAd->CommonCfg.CentralChannel > pAd->CommonCfg.Channel) && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40))
 	{
@@ -1339,7 +1223,9 @@ VOID LinkUp(
 		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
 		Value &= (~0x20);
 		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
+#ifdef RT2860
         pAd->StaCfg.BBPR3 = Value;
+#endif
 
 		RTMP_IO_READ32(pAd, TX_BAND_CFG, &Data);
 		Data &= 0xfffffffe;
@@ -1374,7 +1260,9 @@ VOID LinkUp(
 		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
 	    Value |= (0x20);
 		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
+#ifdef RT2860
         pAd->StaCfg.BBPR3 = Value;
+#endif
 
 		if (pAd->MACVersion == 0x28600100)
 		{
@@ -1387,7 +1275,6 @@ VOID LinkUp(
 	    DBGPRINT(RT_DEBUG_TRACE, ("!!! 40MHz Upper LINK UP !!! Control Channel at UpperCentral = %d \n", pAd->CommonCfg.CentralChannel ));
     }
     else
-#endif // DOT11_N_SUPPORT //
     {
 	    pAd->CommonCfg.BBPCurrentBW = BW_20;
 		pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel;
@@ -1405,7 +1292,9 @@ VOID LinkUp(
 		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
 		Value &= (~0x20);
 		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
+#ifdef RT2860
         pAd->StaCfg.BBPR3 = Value;
+#endif
 
 		if (pAd->MACVersion == 0x28600100)
 		{
@@ -1427,9 +1316,7 @@ VOID LinkUp(
 	DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK UP !!! (BssType=%d, AID=%d, ssid=%s, Channel=%d, CentralChannel = %d)\n",
 		BssType, pAd->StaActive.Aid, pAd->CommonCfg.Ssid, pAd->CommonCfg.Channel, pAd->CommonCfg.CentralChannel));
 
-#ifdef DOT11_N_SUPPORT
 	DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK UP !!! (Density =%d, )\n", pAd->MacTab.Content[BSSID_WCID].MpduDensity));
-#endif // DOT11_N_SUPPORT //
 
 		AsicSetBssid(pAd, pAd->CommonCfg.Bssid);
 
@@ -1439,7 +1326,6 @@ VOID LinkUp(
 	// Call this for RTS protectionfor legacy rate, we will always enable RTS threshold, but normally it will not hit
 	AsicUpdateProtect(pAd, 0, (OFDMSETPROTECT | CCKSETPROTECT), TRUE, FALSE);
 
-#ifdef DOT11_N_SUPPORT
 	if ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE))
 	{
 		// Update HT protectionfor based on AP's operating mode.
@@ -1450,7 +1336,6 @@ VOID LinkUp(
     	else
    			AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode,  ALLN_SETPROTECT, FALSE, FALSE);
 	}
-#endif // DOT11_N_SUPPORT //
 
 	NdisZeroMemory(&pAd->DrsCounters, sizeof(COUNTER_DRS));
 
@@ -1467,9 +1352,6 @@ VOID LinkUp(
 
 	if (pAd->CommonCfg.RadarDetect.RDMode == RD_SILENCE_MODE)
 	{
-#ifdef DFS_SUPPORT
-		RadarDetectionStop(pAd);
-#endif // DFS_SUPPORT //
 	}
 	pAd->CommonCfg.RadarDetect.RDMode = RD_NORMAL_MODE;
 
@@ -1602,7 +1484,9 @@ VOID LinkUp(
 			IV |= (pAd->StaCfg.DefaultKeyId << 30);
 			AsicUpdateWCIDIVEIV(pAd, BSSID_WCID, IV, 0);
 
+#ifdef RT2860
 			RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
+#endif
 		}
 		// NOTE:
 		// the decision of using "short slot time" or not may change dynamically due to
@@ -1643,15 +1527,11 @@ VOID LinkUp(
 
 
 		// If WEP is enabled, add paiewise and shared key
-#ifdef WPA_SUPPLICANT_SUPPORT
         if (((pAd->StaCfg.WpaSupplicantUP)&&
              (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled)&&
              (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED)) ||
             ((pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_DISABLE)&&
               (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled)))
-#else
-		if (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled)
-#endif // WPA_SUPPLICANT_SUPPORT //
 		{
 			PUCHAR	Key;
 			UCHAR 	CipherAlg;
@@ -1687,9 +1567,14 @@ VOID LinkUp(
 		{
 			pAd->IndicateMediaState = NdisMediaStateConnected;
 			pAd->ExtraInfo = GENERAL_LINK_UP;
+#ifdef RT2870
+			RTMP_IndicateMediaState(pAd);
+#endif
 		}
         // --
+#ifdef RT2860
 		RTMP_IndicateMediaState(pAd);
+#endif
 
 		// Add BSSID in my MAC Table.
         NdisAcquireSpinLock(&pAd->MacTabLock);
@@ -1700,6 +1585,9 @@ VOID LinkUp(
 		pAd->MacTab.Size = 1;	// infra mode always set MACtab size =1.
 		pAd->MacTab.Content[BSSID_WCID].Sst = SST_ASSOC;
 		pAd->MacTab.Content[BSSID_WCID].AuthState = SST_ASSOC;
+#ifdef RT30xx
+		pAd->MacTab.Content[BSSID_WCID].AuthMode = pAd->StaCfg.AuthMode;
+#endif
 		pAd->MacTab.Content[BSSID_WCID].WepStatus = pAd->StaCfg.WepStatus;
         NdisReleaseSpinLock(&pAd->MacTabLock);
 
@@ -1707,17 +1595,8 @@ VOID LinkUp(
 			pAd->MacTab.Content[BSSID_WCID].ClientStatusFlags));
 
 		MlmeUpdateTxRates(pAd, TRUE, BSS0);
-#ifdef DOT11_N_SUPPORT
 		MlmeUpdateHtTxRates(pAd, BSS0);
 		DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK UP !! (StaActive.bHtEnable =%d, )\n", pAd->StaActive.SupportedPhyInfo.bHtEnable));
-#endif // DOT11_N_SUPPORT //
-
-		//
-		// Report Adjacent AP report.
-		//
-#ifdef LEAP_SUPPORT
-		CCXAdjacentAPReport(pAd);
-#endif // LEAP_SUPPORT //
 
 		if (pAd->CommonCfg.bAggregationCapable)
 		{
@@ -1737,12 +1616,11 @@ VOID LinkUp(
 
 		if (pAd->MlmeAux.APRalinkIe != 0x0)
 		{
-#ifdef DOT11_N_SUPPORT
 			if (CLIENT_STATUS_TEST_FLAG(&pAd->MacTab.Content[BSSID_WCID], fCLIENT_STATUS_RDG_CAPABLE))
 			{
 				AsicEnableRDG(pAd);
 			}
-#endif // DOT11_N_SUPPORT //
+
 			OPSTATUS_SET_FLAG(pAd, fCLIENT_STATUS_RALINK_CHIPSET);
 			CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[BSSID_WCID], fCLIENT_STATUS_RALINK_CHIPSET);
 		}
@@ -1753,9 +1631,7 @@ VOID LinkUp(
 		}
 	}
 
-#ifdef DOT11_N_SUPPORT
 	DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_CONNECT Event B!.BACapability = %x. ClientStatusFlags = %lx\n", pAd->CommonCfg.BACapability.word, pAd->MacTab.Content[BSSID_WCID].ClientStatusFlags));
-#endif // DOT11_N_SUPPORT //
 
 	// Set LED
 	RTMPSetLED(pAd, LED_LINK_UP);
@@ -1780,13 +1656,13 @@ VOID LinkUp(
 	if (pAd->StaCfg.bAutoTxRateSwitch == FALSE)
 	{
 		pEntry->bAutoTxRateSwitch = FALSE;
-#ifdef DOT11_N_SUPPORT
+
 		if (pEntry->HTPhyMode.field.MCS == 32)
 			pEntry->HTPhyMode.field.ShortGI = GI_800;
 
 		if ((pEntry->HTPhyMode.field.MCS > MCS_7) || (pEntry->HTPhyMode.field.MCS == 32))
 			pEntry->HTPhyMode.field.STBC = STBC_NONE;
-#endif // DOT11_N_SUPPORT //
+
 		// If the legacy mode is set, overwrite the transmit setting of this entry.
 		if (pEntry->HTPhyMode.field.MODE <= MODE_OFDM)
 			RTMPUpdateLegacyTxSetting((UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode, pEntry);
@@ -1815,7 +1691,6 @@ VOID LinkUp(
 		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, Value);
 	}
 
-#ifdef DOT11_N_SUPPORT
 	if (pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE)
 	{
 	}
@@ -1825,7 +1700,6 @@ VOID LinkUp(
 	    // Because our Init value is 1 at MACRegTable.
 		RTMP_IO_WRITE32(pAd, MAX_LEN_CFG, 0x0fff);
 	}
-#endif // DOT11_N_SUPPORT //
 
 	// Patch for Marvel AP to gain high throughput
 	// Need to set as following,
@@ -1837,9 +1711,15 @@ VOID LinkUp(
 	// Txop can only be modified when RDG is off, WMM is disable and TxBurst is enable
 	//
 	// if 1. Legacy AP WMM on,  or 2. 11n AP, AMPDU disable.  Force turn off burst no matter what bEnableTxBurst is.
-#ifdef DOT11_N_SUPPORT
+#ifdef RT30xx
+	if (!((pAd->CommonCfg.RxStream == 1)&&(pAd->CommonCfg.TxStream == 1)) &&
+		(((pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED))
+		|| ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE) && (pAd->CommonCfg.BACapability.field.Policy == BA_NOTUSE))))
+#endif
+#ifndef RT30xx
 	if (((pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED)))
 		|| ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE) && (pAd->CommonCfg.BACapability.field.Policy == BA_NOTUSE)))
+#endif
 	{
 		RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &Data);
 		Data  &= 0xFFFFFF00;
@@ -1849,7 +1729,6 @@ VOID LinkUp(
 		DBGPRINT(RT_DEBUG_TRACE, ("Txburst 1\n"));
 	}
 	else
-#endif // DOT11_N_SUPPORT //
 	if (pAd->CommonCfg.bEnableTxBurst)
 	{
 		RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &Data);
@@ -1871,7 +1750,6 @@ VOID LinkUp(
 		DBGPRINT(RT_DEBUG_TRACE, ("Txburst 3\n"));
 	}
 
-#ifdef DOT11_N_SUPPORT
 	// Re-check to turn on TX burst or not.
 	if ((pAd->CommonCfg.IOTestParm.bLastAtheros == TRUE) && ((STA_WEP_ON(pAd))||(STA_TKIP_ON(pAd))))
 	{
@@ -1891,7 +1769,6 @@ VOID LinkUp(
 	{
 		pAd->CommonCfg.IOTestParm.bNextDisableRxBA = FALSE;
 	}
-#endif // DOT11_N_SUPPORT //
 
 	pAd->CommonCfg.IOTestParm.bLastAtheros = FALSE;
 	COPY_MAC_ADDR(pAd->CommonCfg.LastBssid, pAd->CommonCfg.Bssid);
@@ -1924,17 +1801,9 @@ VOID LinkUp(
 	}
 
 	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
+#ifdef RT2860
 	RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW);
-
-#ifdef DOT11_N_SUPPORT
-#ifdef DOT11N_DRAFT3
-	if ((pAd->CommonCfg.BACapability.field.b2040CoexistScanSup) && (pAd->CommonCfg.Channel <= 11))
-	{
-		OPSTATUS_SET_FLAG(pAd, fOP_STATUS_SCAN_2040);
-		BuildEffectedChannelList(pAd);
-	}
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
+#endif
 }
 
 /*
@@ -1967,23 +1836,21 @@ VOID LinkDown(
 	IN  BOOLEAN      IsReqFromAP)
 {
 	UCHAR			    i, ByteValue = 0;
+#ifdef RT2860
 	BOOLEAN		Cancelled;
+#endif
 
 	// Do nothing if monitor mode is on
 	if (MONITOR_ON(pAd))
 		return;
 
-#ifdef RALINK_ATE
-	// Nothing to do in ATE mode.
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
+#ifdef RT2860
 	RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW);
 	RTMPCancelTimer(&pAd->Mlme.PsPollTimer,		&Cancelled);
 
 	// Not allow go to sleep within linkdown function.
 	RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
+#endif
 
     if (pAd->CommonCfg.bWirelessEvent)
 	{
@@ -1993,6 +1860,7 @@ VOID LinkDown(
 	DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK DOWN !!!\n"));
 	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED);
 
+#ifdef RT2860
     if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
     {
 	    BOOLEAN Cancelled;
@@ -2009,6 +1877,7 @@ VOID LinkDown(
     }
 
     pAd->bPCIclkOff = FALSE;
+#endif
 	if (ADHOC_ON(pAd))		// Adhoc mode link down
 	{
 		DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK DOWN 1!!!\n"));
@@ -2025,33 +1894,6 @@ VOID LinkDown(
 	{
 		DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK DOWN 2!!!\n"));
 
-#ifdef QOS_DLS_SUPPORT
-		// DLS tear down frame must be sent before link down
-		// send DLS-TEAR_DOWN message
-		if (pAd->CommonCfg.bDLSCapable)
-		{
-			// tear down local dls table entry
-			for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-			{
-				if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
-				{
-					pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
-					RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
-				}
-			}
-
-			// tear down peer dls table entry
-			for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
-			{
-				if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status ==  DLS_FINISH))
-				{
-					pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
-					RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
-				}
-			}
-		}
-#endif // QOS_DLS_SUPPORT //
-
 		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_INFRA_ON);
 		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
 
@@ -2095,17 +1937,6 @@ VOID LinkDown(
 			NdisMoveMemory(pAd->StaCfg.CCXAdjacentAPSsid, pAd->CommonCfg.Ssid, pAd->StaCfg.CCXAdjacentAPSsidLen);
 			COPY_MAC_ADDR(pAd->StaCfg.CCXAdjacentAPBssid, pAd->CommonCfg.Bssid);
 		}
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-		// Country IE of the AP will be evaluated and will be used.
-		if (pAd->StaCfg.IEEE80211dClientMode != Rt802_11_D_None)
-		{
-			NdisMoveMemory(&pAd->CommonCfg.CountryCode[0], &pAd->StaCfg.StaOriCountryCode[0], 2);
-			pAd->CommonCfg.Geography = pAd->StaCfg.StaOriGeography;
-			BuildChannelListEx(pAd);
-		}
-#endif // EXT_BUILD_CHANNEL_LIST //
-
 	}
 
 	for (i=1; i<MAX_LEN_OF_MAC_TABLE; i++)
@@ -2137,12 +1968,11 @@ VOID LinkDown(
 		NdisZeroMemory(pAd->CommonCfg.Ssid, MAX_LEN_OF_SSID);
 		pAd->CommonCfg.SsidLen = 0;
 	}
-#ifdef DOT11_N_SUPPORT
+
 	NdisZeroMemory(&pAd->MlmeAux.HtCapability, sizeof(HT_CAPABILITY_IE));
 	NdisZeroMemory(&pAd->MlmeAux.AddHtInfo, sizeof(ADD_HT_INFO_IE));
 	pAd->MlmeAux.HtCapabilityLen = 0;
 	pAd->MlmeAux.NewExtChannelOffset = 0xff;
-#endif // DOT11_N_SUPPORT //
 
 	// Reset WPA-PSK state. Only reset when supplicant enabled
 	if (pAd->StaCfg.WpaState != SS_NOTUSE)
@@ -2150,11 +1980,6 @@ VOID LinkDown(
 		pAd->StaCfg.WpaState = SS_START;
 		// Clear Replay counter
 		NdisZeroMemory(pAd->StaCfg.ReplayCounter, 8);
-
-#ifdef QOS_DLS_SUPPORT
-		if (pAd->CommonCfg.bDLSCapable)
-			NdisZeroMemory(pAd->StaCfg.DlsReplayCounter, 8);
-#endif // QOS_DLS_SUPPORT //
 	}
 
 
@@ -2169,7 +1994,7 @@ VOID LinkDown(
 	}
 
 	// 802.1x port control
-#ifdef WPA_SUPPLICANT_SUPPORT
+
 	// Prevent clear PortSecured here with static WEP
 	// NetworkManger set security policy first then set SSID to connect AP.
 	if (pAd->StaCfg.WpaSupplicantUP &&
@@ -2179,7 +2004,6 @@ VOID LinkDown(
 		pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
 	}
 	else
-#endif // WPA_SUPPLICANT_SUPPORT //
 	{
 		pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
 		pAd->StaCfg.PrivacyFilter = Ndis802_11PrivFilter8021xWEP;
@@ -2199,13 +2023,18 @@ VOID LinkDown(
 	// Update extra information to link is up
 	pAd->ExtraInfo = GENERAL_LINK_DOWN;
 
+#ifdef RT2860
     pAd->StaCfg.AdhocBOnlyJoined = FALSE;
 	pAd->StaCfg.AdhocBGJoined = FALSE;
 	pAd->StaCfg.Adhoc20NJoined = FALSE;
+#endif
     pAd->StaActive.SupportedPhyInfo.bHtEnable = FALSE;
 
 	// Reset the Current AP's IP address
 	NdisZeroMemory(pAd->StaCfg.AironetIPAddress, 4);
+#ifdef RT2870
+	pAd->bUsbTxBulkAggre = FALSE;
+#endif // RT2870 //
 
 	// Clean association information
 	NdisZeroMemory(&pAd->StaCfg.AssocInfo, sizeof(NDIS_802_11_ASSOCIATION_INFORMATION));
@@ -2227,7 +2056,6 @@ VOID LinkDown(
 	pAd->CommonCfg.MlmeRate = pAd->CommonCfg.BasicMlmeRate;
 	pAd->CommonCfg.RtsRate = pAd->CommonCfg.BasicMlmeRate;
 
-#ifdef DOT11_N_SUPPORT
 	//
 	// After Link down, reset piggy-back setting in ASIC. Disable RDG.
 	//
@@ -2238,7 +2066,7 @@ VOID LinkDown(
 		ByteValue &= (~0x18);
 		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, ByteValue);
 	}
-#endif // DOT11_N_SUPPORT //
+
 	// Reset DAC
 	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &ByteValue);
 	ByteValue &= (~0x18);
@@ -2251,9 +2079,7 @@ VOID LinkDown(
 	RTMPSetPiggyBack(pAd,FALSE);
 	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_PIGGYBACK_INUSED);
 
-#ifdef DOT11_N_SUPPORT
 	pAd->CommonCfg.BACapability.word = pAd->CommonCfg.REGBACapability.word;
-#endif // DOT11_N_SUPPORT //
 
 	// Restore all settings in the following.
 	AsicUpdateProtect(pAd, 0, (ALLN_SETPROTECT|CCKSETPROTECT|OFDMSETPROTECT), TRUE, FALSE);
@@ -2261,43 +2087,35 @@ VOID LinkDown(
 	pAd->CommonCfg.IOTestParm.bCurrentAtheros = FALSE;
 	pAd->CommonCfg.IOTestParm.bNowAtherosBurstOn = FALSE;
 
-#ifdef DOT11_N_SUPPORT
-#ifdef DOT11N_DRAFT3
-	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SCAN_2040);
-	pAd->CommonCfg.BSSCoexist2040.word = 0;
-	TriEventInit(pAd);
-	for (i = 0; i < (pAd->ChannelListNum - 1); i++)
-	{
-		pAd->ChannelList[i].bEffectedChannel = FALSE;
-	}
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
-
 	RTMP_IO_WRITE32(pAd, MAX_LEN_CFG, 0x1fff);
 	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
 
+#ifdef RT2860
 	// Allow go to sleep after linkdown steps.
 	RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
+#endif
 
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-	if (pAd->StaCfg.WpaSupplicantUP) {
-		union iwreq_data    wrqu;
-		//send disassociate event to wpa_supplicant
-		memset(&wrqu, 0, sizeof(wrqu));
-		wrqu.data.flags = RT_DISASSOC_EVENT_FLAG;
-		wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL);
-	}
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
 	{
 		union iwreq_data    wrqu;
 		memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN);
 		wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
 	}
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
+
+#ifdef RT30xx
+	if (IS_RT3090(pAd))
+	{
+		UINT32				macdata;
+		// disable MMPS BBP control register
+		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &ByteValue);
+		ByteValue &= ~(0x04);	//bit 2
+		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, ByteValue);
+
+		// disable MMPS MAC control register
+		RTMP_IO_READ32(pAd, 0x1210, &macdata);
+		macdata &= ~(0x09);	//bit 0, 3
+		RTMP_IO_WRITE32(pAd, 0x1210, macdata);
+	}
+#endif // RT30xx //
 }
 
 /*
@@ -2457,26 +2275,6 @@ VOID ScanParmFill(
 	ScanReq->ScanType = ScanType;
 }
 
-#ifdef QOS_DLS_SUPPORT
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID DlsParmFill(
-	IN PRTMP_ADAPTER pAd,
-	IN OUT MLME_DLS_REQ_STRUCT *pDlsReq,
-	IN PRT_802_11_DLS pDls,
-	IN USHORT reason)
-{
-	pDlsReq->pDLS = pDls;
-	pDlsReq->Reason = reason;
-}
-#endif // QOS_DLS_SUPPORT //
-
 /*
 	==========================================================================
 	Description:
@@ -2523,21 +2321,61 @@ VOID AuthParmFill(
 
 	==========================================================================
  */
+
+
+#ifdef RT2870
+
+VOID MlmeCntlConfirm(
+	IN PRTMP_ADAPTER pAd,
+	IN ULONG MsgType,
+	IN USHORT Msg)
+{
+	MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MsgType, sizeof(USHORT), &Msg);
+}
+#endif
+
 VOID ComposePsPoll(
 	IN PRTMP_ADAPTER pAd)
 {
+#ifdef RT2870
+	PTXINFO_STRUC		pTxInfo;
+	PTXWI_STRUC		pTxWI;
+
+	DBGPRINT(RT_DEBUG_TRACE, ("ComposePsPoll\n"));
+#endif
 	NdisZeroMemory(&pAd->PsPollFrame, sizeof(PSPOLL_FRAME));
+
+#ifdef RT2870
+	pAd->PsPollFrame.FC.PwrMgmt = 0;
+#endif
 	pAd->PsPollFrame.FC.Type = BTYPE_CNTL;
 	pAd->PsPollFrame.FC.SubType = SUBTYPE_PS_POLL;
 	pAd->PsPollFrame.Aid = pAd->StaActive.Aid | 0xC000;
 	COPY_MAC_ADDR(pAd->PsPollFrame.Bssid, pAd->CommonCfg.Bssid);
 	COPY_MAC_ADDR(pAd->PsPollFrame.Ta, pAd->CurrentAddress);
+
+#ifdef RT2870
+	RTMPZeroMemory(&pAd->PsPollContext.TransferBuffer->field.WirelessPacket[0], 100);
+	pTxInfo = (PTXINFO_STRUC)&pAd->PsPollContext.TransferBuffer->field.WirelessPacket[0];
+	RTMPWriteTxInfo(pAd, pTxInfo, (USHORT)(sizeof(PSPOLL_FRAME)+TXWI_SIZE), TRUE, EpToQueue[MGMTPIPEIDX], FALSE,  FALSE);
+	pTxWI = (PTXWI_STRUC)&pAd->PsPollContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE];
+	RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE, TRUE, FALSE, 0, BSSID_WCID, (sizeof(PSPOLL_FRAME)),
+		0,  0, (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_BACKOFF, FALSE, &pAd->CommonCfg.MlmeTransmit);
+	RTMPMoveMemory(&pAd->PsPollContext.TransferBuffer->field.WirelessPacket[TXWI_SIZE+TXINFO_SIZE], &pAd->PsPollFrame, sizeof(PSPOLL_FRAME));
+	// Append 4 extra zero bytes.
+	pAd->PsPollContext.BulkOutSize =  TXINFO_SIZE + TXWI_SIZE + sizeof(PSPOLL_FRAME) + 4;
+#endif
 }
 
 // IRQL = DISPATCH_LEVEL
 VOID ComposeNullFrame(
 	IN PRTMP_ADAPTER pAd)
 {
+#ifdef RT2870
+	PTXINFO_STRUC		pTxInfo;
+	PTXWI_STRUC		pTxWI;
+#endif
+
 	NdisZeroMemory(&pAd->NullFrame, sizeof(HEADER_802_11));
 	pAd->NullFrame.FC.Type = BTYPE_DATA;
 	pAd->NullFrame.FC.SubType = SUBTYPE_NULL_FUNC;
@@ -2545,6 +2383,16 @@ VOID ComposeNullFrame(
 	COPY_MAC_ADDR(pAd->NullFrame.Addr1, pAd->CommonCfg.Bssid);
 	COPY_MAC_ADDR(pAd->NullFrame.Addr2, pAd->CurrentAddress);
 	COPY_MAC_ADDR(pAd->NullFrame.Addr3, pAd->CommonCfg.Bssid);
+#ifdef RT2870
+	RTMPZeroMemory(&pAd->NullContext.TransferBuffer->field.WirelessPacket[0], 100);
+	pTxInfo = (PTXINFO_STRUC)&pAd->NullContext.TransferBuffer->field.WirelessPacket[0];
+	RTMPWriteTxInfo(pAd, pTxInfo, (USHORT)(sizeof(HEADER_802_11)+TXWI_SIZE), TRUE, EpToQueue[MGMTPIPEIDX], FALSE,  FALSE);
+	pTxWI = (PTXWI_STRUC)&pAd->NullContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE];
+	RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE, TRUE, FALSE, 0, BSSID_WCID, (sizeof(HEADER_802_11)),
+		0, 0, (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_BACKOFF, FALSE, &pAd->CommonCfg.MlmeTransmit);
+	RTMPMoveMemory(&pAd->NullContext.TransferBuffer->field.WirelessPacket[TXWI_SIZE+TXINFO_SIZE], &pAd->NullFrame, sizeof(HEADER_802_11));
+	pAd->NullContext.BulkOutSize =  TXINFO_SIZE + TXWI_SIZE + sizeof(pAd->NullFrame) + 4;
+#endif
 }
 
 
@@ -2688,22 +2536,15 @@ ULONG MakeIbssBeacon(
 		FrameLen += tmp;
 	}
 
-#ifdef DOT11_N_SUPPORT
 	if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
 	{
 		ULONG TmpLen;
 		UCHAR HtLen, HtLen1;
 
-#ifdef RT_BIG_ENDIAN
-		HT_CAPABILITY_IE HtCapabilityTmp;
-		ADD_HT_INFO_IE	addHTInfoTmp;
-		USHORT	b2lTmp, b2lTmp2;
-#endif
-
 		// add HT Capability IE
 		HtLen = sizeof(pAd->CommonCfg.HtCapability);
 		HtLen1 = sizeof(pAd->CommonCfg.AddHTInfo);
-#ifndef RT_BIG_ENDIAN
+
 		MakeOutgoingFrame(pBeaconFrame+FrameLen,	&TmpLen,
 						  1,						&HtCapIe,
 						  1,						&HtLen,
@@ -2712,27 +2553,9 @@ ULONG MakeIbssBeacon(
 						  1,						&HtLen1,
 						  HtLen1,					&pAd->CommonCfg.AddHTInfo,
 						  END_OF_ARGS);
-#else
-		NdisMoveMemory(&HtCapabilityTmp, &pAd->CommonCfg.HtCapability, HtLen);
-		*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
-		*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
-
-		NdisMoveMemory(&addHTInfoTmp, &pAd->CommonCfg.AddHTInfo, HtLen1);
-		*(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
-		*(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
 
-		MakeOutgoingFrame(pBeaconFrame+FrameLen,	&TmpLen,
-						  1,						&HtCapIe,
-						  1,						&HtLen,
-						  HtLen,					&HtCapabilityTmp,
-						  1,						&AddHtInfoIe,
-						  1,						&HtLen1,
-						  HtLen1,					&addHTInfoTmp,
-						  END_OF_ARGS);
-#endif
 		FrameLen += TmpLen;
 	}
-#endif // DOT11_N_SUPPORT //
 
 	//beacon use reserved WCID 0xff
     if (pAd->CommonCfg.Channel > 14)
@@ -2749,11 +2572,6 @@ ULONG MakeIbssBeacon(
     		PID_MGMT, PID_BEACON, RATE_1, IFS_HTTXOP, FALSE, &Transmit);
     }
 
-#ifdef RT_BIG_ENDIAN
-	RTMPFrameEndianChange(pAd, pBeaconFrame, DIR_WRITE, FALSE);
-	RTMPWIEndianChange((PUCHAR)pTxWI, TYPE_TXWI);
-#endif
-
     DBGPRINT(RT_DEBUG_TRACE, ("MakeIbssBeacon (len=%ld), SupRateLen=%d, ExtRateLen=%d, Channel=%d, PhyMode=%d\n",
 					FrameLen, SupRateLen, ExtRateLen, pAd->CommonCfg.Channel, pAd->CommonCfg.PhyMode));
 	return FrameLen;
diff --git a/drivers/staging/rt2860/sta/dls.c b/drivers/staging/rt2860/sta/dls.c
deleted file mode 100644
index 873cf7f1de9..00000000000
--- a/drivers/staging/rt2860/sta/dls.c
+++ /dev/null
@@ -1,2197 +0,0 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-    dls.c
-
-    Abstract:
-    Handle WMM-DLS state machine
-
-    Revision History:
-    Who         When          What
-    --------    ----------    ----------------------------------------------
-    Rory Chen   02-14-2006
-	Arvin Tai	06-03-2008	  Modified for RT28xx
- */
-
-#include "../rt_config.h"
-
-/*
-    ==========================================================================
-    Description:
-        dls state machine init, including state transition and timer init
-    Parameters:
-        Sm - pointer to the dls state machine
-    Note:
-        The state machine looks like this
-
-                            DLS_IDLE
-    MT2_MLME_DLS_REQUEST   MlmeDlsReqAction
-    MT2_PEER_DLS_REQUEST   PeerDlsReqAction
-    MT2_PEER_DLS_RESPONSE  PeerDlsRspAction
-    MT2_MLME_DLS_TEARDOWN  MlmeTearDownAction
-    MT2_PEER_DLS_TEARDOWN  PeerTearDownAction
-
-	IRQL = PASSIVE_LEVEL
-
-    ==========================================================================
- */
-void DlsStateMachineInit(
-    IN PRTMP_ADAPTER pAd,
-    IN STATE_MACHINE *Sm,
-    OUT STATE_MACHINE_FUNC Trans[])
-{
-	UCHAR	i;
-
-    StateMachineInit(Sm, (STATE_MACHINE_FUNC*)Trans, MAX_DLS_STATE, MAX_DLS_MSG, (STATE_MACHINE_FUNC)Drop, DLS_IDLE, DLS_MACHINE_BASE);
-
-    // the first column
-    StateMachineSetAction(Sm, DLS_IDLE, MT2_MLME_DLS_REQ, (STATE_MACHINE_FUNC)MlmeDlsReqAction);
-    StateMachineSetAction(Sm, DLS_IDLE, MT2_PEER_DLS_REQ, (STATE_MACHINE_FUNC)PeerDlsReqAction);
-    StateMachineSetAction(Sm, DLS_IDLE, MT2_PEER_DLS_RSP, (STATE_MACHINE_FUNC)PeerDlsRspAction);
-    StateMachineSetAction(Sm, DLS_IDLE, MT2_MLME_DLS_TEAR_DOWN, (STATE_MACHINE_FUNC)MlmeDlsTearDownAction);
-    StateMachineSetAction(Sm, DLS_IDLE, MT2_PEER_DLS_TEAR_DOWN, (STATE_MACHINE_FUNC)PeerDlsTearDownAction);
-
-	for (i=0; i<MAX_NUM_OF_DLS_ENTRY; i++)
-	{
-		pAd->StaCfg.DLSEntry[i].pAd = pAd;
-		RTMPInitTimer(pAd, &pAd->StaCfg.DLSEntry[i].Timer, GET_TIMER_FUNCTION(DlsTimeoutAction), pAd, FALSE);
-	}
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID MlmeDlsReqAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-	PUCHAR			pOutBuffer = NULL;
-	NDIS_STATUS		NStatus;
-	ULONG			FrameLen = 0;
-	HEADER_802_11	DlsReqHdr;
-	PRT_802_11_DLS	pDLS = NULL;
-	UCHAR			Category = CATEGORY_DLS;
-	UCHAR			Action = ACTION_DLS_REQUEST;
-	ULONG			tmp;
-	USHORT			reason;
-	ULONG			Timeout;
-	BOOLEAN			TimerCancelled;
-
-	if(!MlmeDlsReqSanity(pAd, Elem->Msg, Elem->MsgLen, &pDLS, &reason))
-		return;
-
-	DBGPRINT(RT_DEBUG_TRACE,("DLS - MlmeDlsReqAction() \n"));
-
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-	if (NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("DLS - MlmeDlsReqAction() allocate memory failed \n"));
-		return;
-	}
-
-	ActHeaderInit(pAd, &DlsReqHdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
-
-	// Build basic frame first
-	MakeOutgoingFrame(pOutBuffer,				&FrameLen,
-					sizeof(HEADER_802_11),		&DlsReqHdr,
-					1,							&Category,
-					1,							&Action,
-					6,							&pDLS->MacAddr,
-					6,							pAd->CurrentAddress,
-					2,							&pAd->StaActive.CapabilityInfo,
-					2,							&pDLS->TimeOut,
-					1,							&SupRateIe,
-					1,							&pAd->MlmeAux.SupRateLen,
-					pAd->MlmeAux.SupRateLen,	pAd->MlmeAux.SupRate,
-					END_OF_ARGS);
-
-	if (pAd->MlmeAux.ExtRateLen != 0)
-	{
-		MakeOutgoingFrame(pOutBuffer + FrameLen,	&tmp,
-						  1,						&ExtRateIe,
-						  1,						&pAd->MlmeAux.ExtRateLen,
-						  pAd->MlmeAux.ExtRateLen,	pAd->MlmeAux.ExtRate,
-						  END_OF_ARGS);
-		FrameLen += tmp;
-	}
-
-#ifdef DOT11_N_SUPPORT
-	if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
-	{
-		UCHAR HtLen;
-
-#ifdef RT_BIG_ENDIAN
-		HT_CAPABILITY_IE HtCapabilityTmp;
-#endif
-
-		// add HT Capability IE
-		HtLen = sizeof(HT_CAPABILITY_IE);
-#ifndef RT_BIG_ENDIAN
-		MakeOutgoingFrame(pOutBuffer + FrameLen,	&tmp,
-							1,						&HtCapIe,
-							1,						&HtLen,
-							HtLen,					&pAd->CommonCfg.HtCapability,
-							END_OF_ARGS);
-#else
-		NdisMoveMemory(&HtCapabilityTmp, &pAd->CommonCfg.HtCapability, HtLen);
-							*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
-							*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
-
-		MakeOutgoingFrame(pOutBuffer + FrameLen,	&tmp,
-							1,						&HtCapIe,
-							1,						&HtLen,
-							HtLen,					&HtCapabilityTmp,
-							END_OF_ARGS);
-#endif
-		FrameLen = FrameLen + tmp;
-	}
-#endif // DOT11_N_SUPPORT //
-
-	RTMPCancelTimer(&pDLS->Timer, &TimerCancelled);
-	Timeout = DLS_TIMEOUT;
-	RTMPSetTimer(&pDLS->Timer, Timeout);
-
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID PeerDlsReqAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-	PUCHAR			pOutBuffer = NULL;
-	NDIS_STATUS		NStatus;
-	ULONG			FrameLen = 0;
-	USHORT			StatusCode = MLME_SUCCESS;
-	HEADER_802_11	DlsRspHdr;
-	UCHAR			Category = CATEGORY_DLS;
-	UCHAR			Action = ACTION_DLS_RESPONSE;
-	ULONG			tmp;
-	USHORT			CapabilityInfo;
-	UCHAR			DA[MAC_ADDR_LEN], SA[MAC_ADDR_LEN];
-	USHORT			DLSTimeOut;
-	SHORT			i;
-	ULONG			Timeout;
-	BOOLEAN			TimerCancelled;
-	PRT_802_11_DLS	pDLS = NULL;
-	UCHAR			MaxSupportedRateIn500Kbps = 0;
-    UCHAR			SupportedRatesLen;
-    UCHAR			SupportedRates[MAX_LEN_OF_SUPPORTED_RATES];
-	UCHAR			HtCapabilityLen;
-	HT_CAPABILITY_IE	HtCapability;
-
-	if (!PeerDlsReqSanity(pAd, Elem->Msg, Elem->MsgLen, DA, SA, &CapabilityInfo, &DLSTimeOut,
-							&SupportedRatesLen, &SupportedRates[0], &HtCapabilityLen, &HtCapability))
-		return;
-
-    // supported rates array may not be sorted. sort it and find the maximum rate
-    for (i = 0; i < SupportedRatesLen; i++)
-    {
-        if (MaxSupportedRateIn500Kbps < (SupportedRates[i] & 0x7f))
-            MaxSupportedRateIn500Kbps = SupportedRates[i] & 0x7f;
-    }
-
-	DBGPRINT(RT_DEBUG_TRACE,("DLS - PeerDlsReqAction() from %02x:%02x:%02x:%02x:%02x:%02x\n", SA[0], SA[1], SA[2], SA[3], SA[4], SA[5]));
-
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-	if (NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("DLS - PeerDlsReqAction() allocate memory failed \n"));
-		return;
-	}
-
-	if (!INFRA_ON(pAd))
-	{
-		StatusCode = MLME_REQUEST_DECLINED;
-	}
-	else if (!pAd->CommonCfg.bWmmCapable)
-	{
-		StatusCode = MLME_DEST_STA_IS_NOT_A_QSTA;
-	}
-	else if (!pAd->CommonCfg.bDLSCapable)
-	{
-		StatusCode = MLME_REQUEST_DECLINED;
-	}
-	else
-	{
-		// find table to update parameters
-		for (i = (MAX_NUM_OF_DLS_ENTRY-1); i >= 0; i--)
-		{
-			if (pAd->StaCfg.DLSEntry[i].Valid && MAC_ADDR_EQUAL(SA, pAd->StaCfg.DLSEntry[i].MacAddr))
-			{
-				if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-					pAd->StaCfg.DLSEntry[i].Status = DLS_WAIT_KEY;
-				else
-				{
-					RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-					pAd->StaCfg.DLSEntry[i].Status = DLS_FINISH;
-				}
-
-				pAd->StaCfg.DLSEntry[i].Sequence = 0;
-				pAd->StaCfg.DLSEntry[i].TimeOut = DLSTimeOut;
-				pAd->StaCfg.DLSEntry[i].CountDownTimer = DLSTimeOut;
-				if (HtCapabilityLen != 0)
-					pAd->StaCfg.DLSEntry[i].bHTCap = TRUE;
-				else
-					pAd->StaCfg.DLSEntry[i].bHTCap = FALSE;
-				pDLS = &pAd->StaCfg.DLSEntry[i];
-				break;
-			}
-		}
-
-		// can not find in table, create a new one
-		if (i < 0)
-		{
-			DBGPRINT(RT_DEBUG_TRACE,("DLS - PeerDlsReqAction() can not find same entry \n"));
-			for (i=(MAX_NUM_OF_DLS_ENTRY - 1); i >= MAX_NUM_OF_INIT_DLS_ENTRY; i--)
-			{
-				if (!pAd->StaCfg.DLSEntry[i].Valid)
-				{
-					MAC_TABLE_ENTRY *pEntry;
-					UCHAR MaxSupportedRate = RATE_11;
-
-					if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-					{
-						pAd->StaCfg.DLSEntry[i].Status = DLS_WAIT_KEY;
-					}
-					else
-					{
-						RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-						pAd->StaCfg.DLSEntry[i].Status = DLS_FINISH;
-					}
-
-					pAd->StaCfg.DLSEntry[i].Sequence = 0;
-					pAd->StaCfg.DLSEntry[i].Valid = TRUE;
-					pAd->StaCfg.DLSEntry[i].TimeOut = DLSTimeOut;
-					pAd->StaCfg.DLSEntry[i].CountDownTimer = DLSTimeOut;
-					NdisMoveMemory(pAd->StaCfg.DLSEntry[i].MacAddr, SA, MAC_ADDR_LEN);
-					if (HtCapabilityLen != 0)
-						pAd->StaCfg.DLSEntry[i].bHTCap = TRUE;
-					else
-						pAd->StaCfg.DLSEntry[i].bHTCap = FALSE;
-					pDLS = &pAd->StaCfg.DLSEntry[i];
-					pEntry = MacTableInsertDlsEntry(pAd, SA, i);
-
-					switch (MaxSupportedRateIn500Kbps)
-					{
-						case 108: MaxSupportedRate = RATE_54;   break;
-						case 96:  MaxSupportedRate = RATE_48;   break;
-						case 72:  MaxSupportedRate = RATE_36;   break;
-						case 48:  MaxSupportedRate = RATE_24;   break;
-						case 36:  MaxSupportedRate = RATE_18;   break;
-						case 24:  MaxSupportedRate = RATE_12;   break;
-						case 18:  MaxSupportedRate = RATE_9;    break;
-						case 12:  MaxSupportedRate = RATE_6;    break;
-						case 22:  MaxSupportedRate = RATE_11;   break;
-						case 11:  MaxSupportedRate = RATE_5_5;  break;
-						case 4:   MaxSupportedRate = RATE_2;    break;
-						case 2:   MaxSupportedRate = RATE_1;    break;
-						default:  MaxSupportedRate = RATE_11;   break;
-					}
-
-					pEntry->MaxSupportedRate = min(pAd->CommonCfg.MaxTxRate, MaxSupportedRate);
-
-					if (pEntry->MaxSupportedRate < RATE_FIRST_OFDM_RATE)
-					{
-						pEntry->MaxHTPhyMode.field.MODE = MODE_CCK;
-						pEntry->MaxHTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-						pEntry->MinHTPhyMode.field.MODE = MODE_CCK;
-						pEntry->MinHTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-						pEntry->HTPhyMode.field.MODE = MODE_CCK;
-						pEntry->HTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-					}
-					else
-					{
-						pEntry->MaxHTPhyMode.field.MODE = MODE_OFDM;
-						pEntry->MaxHTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-						pEntry->MinHTPhyMode.field.MODE = MODE_OFDM;
-						pEntry->MinHTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-						pEntry->HTPhyMode.field.MODE = MODE_OFDM;
-						pEntry->HTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-					}
-
-					pEntry->MaxHTPhyMode.field.BW = BW_20;
-					pEntry->MinHTPhyMode.field.BW = BW_20;
-
-#ifdef DOT11_N_SUPPORT
-					pEntry->HTCapability.MCSSet[0] = 0;
-					pEntry->HTCapability.MCSSet[1] = 0;
-
-					// If this Entry supports 802.11n, upgrade to HT rate.
-					if ((HtCapabilityLen != 0) && (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
-					{
-						UCHAR	j, bitmask; //k,bitmask;
-						CHAR    ii;
-
-						DBGPRINT(RT_DEBUG_OFF, ("DLS - PeerDlsReqAction() Receive Peer HT Capable STA from %02x:%02x:%02x:%02x:%02x:%02x\n",
-									SA[0], SA[1], SA[2], SA[3], SA[4], SA[5]));
-
-						if ((HtCapability.HtCapInfo.GF) && (pAd->CommonCfg.DesiredHtPhy.GF))
-						{
-							pEntry->MaxHTPhyMode.field.MODE = MODE_HTGREENFIELD;
-						}
-						else
-						{
-							pEntry->MaxHTPhyMode.field.MODE = MODE_HTMIX;
-							pAd->MacTab.fAnyStationNonGF = TRUE;
-							pAd->CommonCfg.AddHTInfo.AddHtInfo2.NonGfPresent = 1;
-						}
-
-						if ((HtCapability.HtCapInfo.ChannelWidth) && (pAd->CommonCfg.DesiredHtPhy.ChannelWidth))
-						{
-							pEntry->MaxHTPhyMode.field.BW= BW_40;
-							pEntry->MaxHTPhyMode.field.ShortGI = ((pAd->CommonCfg.DesiredHtPhy.ShortGIfor40)&(HtCapability.HtCapInfo.ShortGIfor40));
-						}
-						else
-						{
-							pEntry->MaxHTPhyMode.field.BW = BW_20;
-							pEntry->MaxHTPhyMode.field.ShortGI = ((pAd->CommonCfg.DesiredHtPhy.ShortGIfor20)&(HtCapability.HtCapInfo.ShortGIfor20));
-							pAd->MacTab.fAnyStation20Only = TRUE;
-						}
-
-						// find max fixed rate
-						for (ii=15; ii>=0; ii--)
-						{
-							j = ii/8;
-							bitmask = (1<<(ii-(j*8)));
-							if ( (pAd->StaCfg.DesiredHtPhyInfo.MCSSet[j]&bitmask) && (HtCapability.MCSSet[j]&bitmask))
-							{
-								pEntry->MaxHTPhyMode.field.MCS = ii;
-								break;
-							}
-							if (ii==0)
-								break;
-						}
-
-
-						if (pAd->StaCfg.DesiredTransmitSetting.field.MCS != MCS_AUTO)
-						{
-
-							printk("@@@ pAd->CommonCfg.RegTransmitSetting.field.MCS = %d\n",
-								pAd->StaCfg.DesiredTransmitSetting.field.MCS);
-							if (pAd->StaCfg.DesiredTransmitSetting.field.MCS == 32)
-							{
-								// Fix MCS as HT Duplicated Mode
-								pEntry->MaxHTPhyMode.field.BW = 1;
-								pEntry->MaxHTPhyMode.field.MODE = MODE_HTMIX;
-								pEntry->MaxHTPhyMode.field.STBC = 0;
-								pEntry->MaxHTPhyMode.field.ShortGI = 0;
-								pEntry->MaxHTPhyMode.field.MCS = 32;
-							}
-							else if (pEntry->MaxHTPhyMode.field.MCS > pAd->StaCfg.HTPhyMode.field.MCS)
-							{
-								// STA supports fixed MCS
-								pEntry->MaxHTPhyMode.field.MCS = pAd->StaCfg.HTPhyMode.field.MCS;
-							}
-						}
-
-						pEntry->MaxHTPhyMode.field.STBC = (HtCapability.HtCapInfo.RxSTBC & (pAd->CommonCfg.DesiredHtPhy.TxSTBC));
-						pEntry->MpduDensity = HtCapability.HtCapParm.MpduDensity;
-						pEntry->MaxRAmpduFactor = HtCapability.HtCapParm.MaxRAmpduFactor;
-						pEntry->MmpsMode = (UCHAR)HtCapability.HtCapInfo.MimoPs;
-						pEntry->AMsduSize = (UCHAR)HtCapability.HtCapInfo.AMsduSize;
-						pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word;
-
-						if (HtCapability.HtCapInfo.ShortGIfor20)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI20_CAPABLE);
-						if (HtCapability.HtCapInfo.ShortGIfor40)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI40_CAPABLE);
-						if (HtCapability.HtCapInfo.TxSTBC)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_TxSTBC_CAPABLE);
-						if (HtCapability.HtCapInfo.RxSTBC)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RxSTBC_CAPABLE);
-						if (HtCapability.ExtHtCapInfo.PlusHTC)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_HTC_CAPABLE);
-						if (pAd->CommonCfg.bRdg && HtCapability.ExtHtCapInfo.RDGSupport)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RDG_CAPABLE);
-						if (HtCapability.ExtHtCapInfo.MCSFeedback == 0x03)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_MCSFEEDBACK_CAPABLE);
-
-						NdisMoveMemory(&pEntry->HTCapability, &HtCapability, sizeof(HT_CAPABILITY_IE));
-					}
-#endif // DOT11_N_SUPPORT //
-
-					pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word;
-					pEntry->CurrTxRate = pEntry->MaxSupportedRate;
-					CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_WMM_CAPABLE);
-
-					if (pAd->StaCfg.bAutoTxRateSwitch == TRUE)
-					{
-						PUCHAR pTable;
-						UCHAR TableSize = 0;
-
-						MlmeSelectTxRateTable(pAd, pEntry, &pTable, &TableSize, &pEntry->CurrTxRateIndex);
-						pEntry->bAutoTxRateSwitch = TRUE;
-					}
-					else
-					{
-						pEntry->HTPhyMode.field.MODE	= pAd->StaCfg.HTPhyMode.field.MODE;
-						pEntry->HTPhyMode.field.MCS	= pAd->StaCfg.HTPhyMode.field.MCS;
-						pEntry->bAutoTxRateSwitch = FALSE;
-
-						RTMPUpdateLegacyTxSetting((UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode, pEntry);
-					}
-					pEntry->RateLen = SupportedRatesLen;
-
-					break;
-				}
-			}
-		}
-		StatusCode = MLME_SUCCESS;
-
-		// can not find in table, create a new one
-		if (i < 0)
-		{
-			StatusCode = MLME_QOS_UNSPECIFY;
-			DBGPRINT(RT_DEBUG_ERROR,("DLS - PeerDlsReqAction() DLSEntry table full(only can support %d DLS session) \n", MAX_NUM_OF_DLS_ENTRY - MAX_NUM_OF_INIT_DLS_ENTRY));
-		}
-		else
-		{
-			DBGPRINT(RT_DEBUG_TRACE,("DLS - PeerDlsReqAction() use entry(%d) %02x:%02x:%02x:%02x:%02x:%02x\n",
-				i, SA[0], SA[1], SA[2], SA[3], SA[4], SA[5]));
-		}
-	}
-
-	ActHeaderInit(pAd, &DlsRspHdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
-
-	// Build basic frame first
-	if (StatusCode == MLME_SUCCESS)
-	{
-		MakeOutgoingFrame(pOutBuffer,				&FrameLen,
-						sizeof(HEADER_802_11),		&DlsRspHdr,
-						1,							&Category,
-						1,							&Action,
-						2,							&StatusCode,
-						6,							SA,
-						6,							pAd->CurrentAddress,
-						2,							&pAd->StaActive.CapabilityInfo,
-						1,							&SupRateIe,
-						1,							&pAd->MlmeAux.SupRateLen,
-						pAd->MlmeAux.SupRateLen,	pAd->MlmeAux.SupRate,
-						END_OF_ARGS);
-
-		if (pAd->MlmeAux.ExtRateLen != 0)
-		{
-			MakeOutgoingFrame(pOutBuffer + FrameLen,	&tmp,
-							  1,						&ExtRateIe,
-							  1,						&pAd->MlmeAux.ExtRateLen,
-							  pAd->MlmeAux.ExtRateLen, 	pAd->MlmeAux.ExtRate,
-							  END_OF_ARGS);
-			FrameLen += tmp;
-		}
-
-#ifdef DOT11_N_SUPPORT
-		if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
-		{
-			UCHAR HtLen;
-
-#ifdef RT_BIG_ENDIAN
-			HT_CAPABILITY_IE HtCapabilityTmp;
-#endif
-
-			// add HT Capability IE
-			HtLen = sizeof(HT_CAPABILITY_IE);
-#ifndef RT_BIG_ENDIAN
-			MakeOutgoingFrame(pOutBuffer + FrameLen,	&tmp,
-								1,						&HtCapIe,
-								1,						&HtLen,
-								HtLen,					&pAd->CommonCfg.HtCapability,
-								END_OF_ARGS);
-#else
-			NdisMoveMemory(&HtCapabilityTmp, &pAd->CommonCfg.HtCapability, HtLen);
-								*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
-								*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
-
-			MakeOutgoingFrame(pOutBuffer + FrameLen,	&tmp,
-								1,						&HtCapIe,
-								1,						&HtLen,
-								HtLen,					&HtCapabilityTmp,
-								END_OF_ARGS);
-#endif
-			FrameLen = FrameLen + tmp;
-		}
-#endif // DOT11_N_SUPPORT //
-
-		if (pDLS && (pDLS->Status != DLS_FINISH))
-		{
-			RTMPCancelTimer(&pDLS->Timer, &TimerCancelled);
-			Timeout = DLS_TIMEOUT;
-			RTMPSetTimer(&pDLS->Timer, Timeout);
-		}
-	}
-	else
-	{
-		MakeOutgoingFrame(pOutBuffer,				&FrameLen,
-						sizeof(HEADER_802_11),		&DlsRspHdr,
-						1,							&Category,
-						1,							&Action,
-						2,							&StatusCode,
-						6,							SA,
-						6,							pAd->CurrentAddress,
-						END_OF_ARGS);
-	}
-
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID PeerDlsRspAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT		CapabilityInfo;
-	UCHAR		DA[MAC_ADDR_LEN], SA[MAC_ADDR_LEN];
-	USHORT		StatusCode;
-	SHORT		i;
-	BOOLEAN		TimerCancelled;
-	UCHAR		MaxSupportedRateIn500Kbps = 0;
-    UCHAR		SupportedRatesLen;
-    UCHAR		SupportedRates[MAX_LEN_OF_SUPPORTED_RATES];
-	UCHAR		HtCapabilityLen;
-	HT_CAPABILITY_IE	HtCapability;
-
-	if (!pAd->CommonCfg.bDLSCapable)
-		return;
-
-	if (!INFRA_ON(pAd))
-		return;
-
-	if (!PeerDlsRspSanity(pAd, Elem->Msg, Elem->MsgLen, DA, SA, &CapabilityInfo, &StatusCode,
-							&SupportedRatesLen, &SupportedRates[0], &HtCapabilityLen, &HtCapability))
-		return;
-
-    // supported rates array may not be sorted. sort it and find the maximum rate
-    for (i=0; i<SupportedRatesLen; i++)
-    {
-        if (MaxSupportedRateIn500Kbps < (SupportedRates[i] & 0x7f))
-            MaxSupportedRateIn500Kbps = SupportedRates[i] & 0x7f;
-    }
-
-	DBGPRINT(RT_DEBUG_TRACE,("DLS - PeerDlsRspAction() from %02x:%02x:%02x:%02x:%02x:%02x with StatusCode=%d, CapabilityInfo=0x%x\n",
-		SA[0], SA[1], SA[2], SA[3], SA[4], SA[5], StatusCode, CapabilityInfo));
-
-	for (i = 0; i < MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-	{
-		if (pAd->StaCfg.DLSEntry[i].Valid && MAC_ADDR_EQUAL(SA, pAd->StaCfg.DLSEntry[i].MacAddr))
-		{
-			if (StatusCode == MLME_SUCCESS)
-			{
-				MAC_TABLE_ENTRY *pEntry;
-				UCHAR MaxSupportedRate = RATE_11;
-
-				pEntry = MacTableInsertDlsEntry(pAd, SA, i);
-
-				switch (MaxSupportedRateIn500Kbps)
-				{
-					case 108: MaxSupportedRate = RATE_54;   break;
-					case 96:  MaxSupportedRate = RATE_48;   break;
-					case 72:  MaxSupportedRate = RATE_36;   break;
-					case 48:  MaxSupportedRate = RATE_24;   break;
-					case 36:  MaxSupportedRate = RATE_18;   break;
-					case 24:  MaxSupportedRate = RATE_12;   break;
-					case 18:  MaxSupportedRate = RATE_9;    break;
-					case 12:  MaxSupportedRate = RATE_6;    break;
-					case 22:  MaxSupportedRate = RATE_11;   break;
-					case 11:  MaxSupportedRate = RATE_5_5;  break;
-					case 4:   MaxSupportedRate = RATE_2;    break;
-					case 2:   MaxSupportedRate = RATE_1;    break;
-					default:  MaxSupportedRate = RATE_11;   break;
-				}
-
-				pEntry->MaxSupportedRate = min(pAd->CommonCfg.MaxTxRate, MaxSupportedRate);
-
-				if (pEntry->MaxSupportedRate < RATE_FIRST_OFDM_RATE)
-				{
-					pEntry->MaxHTPhyMode.field.MODE = MODE_CCK;
-					pEntry->MaxHTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-					pEntry->MinHTPhyMode.field.MODE = MODE_CCK;
-					pEntry->MinHTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-					pEntry->HTPhyMode.field.MODE = MODE_CCK;
-					pEntry->HTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-				}
-				else
-				{
-					pEntry->MaxHTPhyMode.field.MODE = MODE_OFDM;
-					pEntry->MaxHTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-					pEntry->MinHTPhyMode.field.MODE = MODE_OFDM;
-					pEntry->MinHTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-					pEntry->HTPhyMode.field.MODE = MODE_OFDM;
-					pEntry->HTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-				}
-
-				pEntry->MaxHTPhyMode.field.BW = BW_20;
-				pEntry->MinHTPhyMode.field.BW = BW_20;
-
-#ifdef DOT11_N_SUPPORT
-				pEntry->HTCapability.MCSSet[0] = 0;
-				pEntry->HTCapability.MCSSet[1] = 0;
-
-				// If this Entry supports 802.11n, upgrade to HT rate.
-				if ((HtCapabilityLen != 0) && (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
-				{
-					UCHAR	j, bitmask; //k,bitmask;
-					CHAR    ii;
-
-					DBGPRINT(RT_DEBUG_OFF, ("DLS - PeerDlsRspAction Receive Peer HT Capable STA from %02x:%02x:%02x:%02x:%02x:%02x\n",
-								SA[0], SA[1], SA[2], SA[3], SA[4], SA[5]));
-
-					if ((HtCapability.HtCapInfo.GF) && (pAd->CommonCfg.DesiredHtPhy.GF))
-					{
-						pEntry->MaxHTPhyMode.field.MODE = MODE_HTGREENFIELD;
-					}
-					else
-					{
-						pEntry->MaxHTPhyMode.field.MODE = MODE_HTMIX;
-						pAd->MacTab.fAnyStationNonGF = TRUE;
-						pAd->CommonCfg.AddHTInfo.AddHtInfo2.NonGfPresent = 1;
-					}
-
-					if ((HtCapability.HtCapInfo.ChannelWidth) && (pAd->CommonCfg.DesiredHtPhy.ChannelWidth))
-					{
-						pEntry->MaxHTPhyMode.field.BW= BW_40;
-						pEntry->MaxHTPhyMode.field.ShortGI = ((pAd->CommonCfg.DesiredHtPhy.ShortGIfor40)&(HtCapability.HtCapInfo.ShortGIfor40));
-					}
-					else
-					{
-						pEntry->MaxHTPhyMode.field.BW = BW_20;
-						pEntry->MaxHTPhyMode.field.ShortGI = ((pAd->CommonCfg.DesiredHtPhy.ShortGIfor20)&(HtCapability.HtCapInfo.ShortGIfor20));
-						pAd->MacTab.fAnyStation20Only = TRUE;
-					}
-
-					// find max fixed rate
-					for (ii=15; ii>=0; ii--)
-					{
-						j = ii/8;
-						bitmask = (1<<(ii-(j*8)));
-						if ( (pAd->StaCfg.DesiredHtPhyInfo.MCSSet[j]&bitmask) && (HtCapability.MCSSet[j]&bitmask))
-						{
-							pEntry->MaxHTPhyMode.field.MCS = ii;
-							break;
-						}
-						if (ii==0)
-							break;
-					}
-
-					if (pAd->StaCfg.DesiredTransmitSetting.field.MCS != MCS_AUTO)
-					{
-						if (pAd->StaCfg.DesiredTransmitSetting.field.MCS == 32)
-						{
-							// Fix MCS as HT Duplicated Mode
-							pEntry->MaxHTPhyMode.field.BW = 1;
-							pEntry->MaxHTPhyMode.field.MODE = MODE_HTMIX;
-							pEntry->MaxHTPhyMode.field.STBC = 0;
-							pEntry->MaxHTPhyMode.field.ShortGI = 0;
-							pEntry->MaxHTPhyMode.field.MCS = 32;
-						}
-						else if (pEntry->MaxHTPhyMode.field.MCS > pAd->StaCfg.HTPhyMode.field.MCS)
-						{
-							// STA supports fixed MCS
-							pEntry->MaxHTPhyMode.field.MCS = pAd->StaCfg.HTPhyMode.field.MCS;
-						}
-					}
-
-					pEntry->MaxHTPhyMode.field.STBC = (HtCapability.HtCapInfo.RxSTBC & (pAd->CommonCfg.DesiredHtPhy.TxSTBC));
-					pEntry->MpduDensity = HtCapability.HtCapParm.MpduDensity;
-					pEntry->MaxRAmpduFactor = HtCapability.HtCapParm.MaxRAmpduFactor;
-					pEntry->MmpsMode = (UCHAR)HtCapability.HtCapInfo.MimoPs;
-					pEntry->AMsduSize = (UCHAR)HtCapability.HtCapInfo.AMsduSize;
-					pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word;
-
-					if (HtCapability.HtCapInfo.ShortGIfor20)
-						CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI20_CAPABLE);
-					if (HtCapability.HtCapInfo.ShortGIfor40)
-						CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI40_CAPABLE);
-					if (HtCapability.HtCapInfo.TxSTBC)
-						CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_TxSTBC_CAPABLE);
-					if (HtCapability.HtCapInfo.RxSTBC)
-						CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RxSTBC_CAPABLE);
-					if (HtCapability.ExtHtCapInfo.PlusHTC)
-						CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_HTC_CAPABLE);
-					if (pAd->CommonCfg.bRdg && HtCapability.ExtHtCapInfo.RDGSupport)
-						CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RDG_CAPABLE);
-					if (HtCapability.ExtHtCapInfo.MCSFeedback == 0x03)
-						CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_MCSFEEDBACK_CAPABLE);
-
-					NdisMoveMemory(&pEntry->HTCapability, &HtCapability, sizeof(HT_CAPABILITY_IE));
-				}
-#endif // DOT11_N_SUPPORT //
-				pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word;
-				pEntry->CurrTxRate = pEntry->MaxSupportedRate;
-				CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_WMM_CAPABLE);
-
-				if (pAd->StaCfg.bAutoTxRateSwitch == TRUE)
-				{
-					PUCHAR pTable;
-					UCHAR TableSize = 0;
-
-					MlmeSelectTxRateTable(pAd, pEntry, &pTable, &TableSize, &pEntry->CurrTxRateIndex);
-					pEntry->bAutoTxRateSwitch = TRUE;
-				}
-				else
-				{
-					pEntry->HTPhyMode.field.MODE	= pAd->StaCfg.HTPhyMode.field.MODE;
-					pEntry->HTPhyMode.field.MCS	= pAd->StaCfg.HTPhyMode.field.MCS;
-					pEntry->bAutoTxRateSwitch = FALSE;
-
-					RTMPUpdateLegacyTxSetting((UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode, pEntry);
-				}
-				pEntry->RateLen = SupportedRatesLen;
-
-				if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-				{
-					// If support WPA or WPA2, start STAKey hand shake,
-					// If failed hand shake, just tear down peer DLS
-					if (RTMPSendSTAKeyRequest(pAd, pAd->StaCfg.DLSEntry[i].MacAddr) != NDIS_STATUS_SUCCESS)
-					{
-						MLME_DLS_REQ_STRUCT	MlmeDlsReq;
-						USHORT				reason = REASON_QOS_CIPHER_NOT_SUPPORT;
-
-						DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-						MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-						pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
-						pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-						DBGPRINT(RT_DEBUG_ERROR,("DLS - PeerDlsRspAction failed when call RTMPSendSTAKeyRequest \n"));
-					}
-					else
-					{
-						pAd->StaCfg.DLSEntry[i].Status = DLS_WAIT_KEY;
-						DBGPRINT(RT_DEBUG_TRACE,("DLS - waiting for STAKey handshake procedure\n"));
-					}
-				}
-				else
-				{
-					RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-					pAd->StaCfg.DLSEntry[i].Status = DLS_FINISH;
-					DBGPRINT(RT_DEBUG_TRACE,("DLS - PeerDlsRspAction() from %02x:%02x:%02x:%02x:%02x:%02x Succeed with WEP or no security\n", SA[0], SA[1], SA[2], SA[3], SA[4], SA[5]));
-				}
-
-				//initialize seq no for DLS frames.
-				pAd->StaCfg.DLSEntry[i].Sequence = 0;
-				if (HtCapabilityLen != 0)
-					pAd->StaCfg.DLSEntry[i].bHTCap = TRUE;
-				else
-					pAd->StaCfg.DLSEntry[i].bHTCap = FALSE;
-			}
-			else
-			{
-				// DLS setup procedure failed.
-				pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
-				pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-				RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-				DBGPRINT(RT_DEBUG_ERROR,("DLS - PeerDlsRspAction failed with StatusCode=%d \n", StatusCode));
-			}
-		}
-	}
-
-	if (i >= MAX_NUM_OF_INIT_DLS_ENTRY)
-	{
-		DBGPRINT(RT_DEBUG_TRACE,("DLS - PeerDlsRspAction() update timeout value \n"));
-		for (i=(MAX_NUM_OF_DLS_ENTRY-1); i>=MAX_NUM_OF_INIT_DLS_ENTRY; i--)
-		{
-			if (pAd->StaCfg.DLSEntry[i].Valid && MAC_ADDR_EQUAL(SA, pAd->StaCfg.DLSEntry[i].MacAddr))
-			{
-				if (StatusCode == MLME_SUCCESS)
-				{
-					MAC_TABLE_ENTRY *pEntry;
-					UCHAR MaxSupportedRate = RATE_11;
-
-					pEntry = MacTableInsertDlsEntry(pAd, SA, i);
-
-					switch (MaxSupportedRateIn500Kbps)
-					{
-						case 108: MaxSupportedRate = RATE_54;   break;
-						case 96:  MaxSupportedRate = RATE_48;   break;
-						case 72:  MaxSupportedRate = RATE_36;   break;
-						case 48:  MaxSupportedRate = RATE_24;   break;
-						case 36:  MaxSupportedRate = RATE_18;   break;
-						case 24:  MaxSupportedRate = RATE_12;   break;
-						case 18:  MaxSupportedRate = RATE_9;    break;
-						case 12:  MaxSupportedRate = RATE_6;    break;
-						case 22:  MaxSupportedRate = RATE_11;   break;
-						case 11:  MaxSupportedRate = RATE_5_5;  break;
-						case 4:   MaxSupportedRate = RATE_2;    break;
-						case 2:   MaxSupportedRate = RATE_1;    break;
-						default:  MaxSupportedRate = RATE_11;   break;
-					}
-
-					pEntry->MaxSupportedRate = min(pAd->CommonCfg.MaxTxRate, MaxSupportedRate);
-
-					if (pEntry->MaxSupportedRate < RATE_FIRST_OFDM_RATE)
-					{
-						pEntry->MaxHTPhyMode.field.MODE = MODE_CCK;
-						pEntry->MaxHTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-						pEntry->MinHTPhyMode.field.MODE = MODE_CCK;
-						pEntry->MinHTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-						pEntry->HTPhyMode.field.MODE = MODE_CCK;
-						pEntry->HTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-					}
-					else
-					{
-						pEntry->MaxHTPhyMode.field.MODE = MODE_OFDM;
-						pEntry->MaxHTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-						pEntry->MinHTPhyMode.field.MODE = MODE_OFDM;
-						pEntry->MinHTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-						pEntry->HTPhyMode.field.MODE = MODE_OFDM;
-						pEntry->HTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-					}
-
-					pEntry->MaxHTPhyMode.field.BW = BW_20;
-					pEntry->MinHTPhyMode.field.BW = BW_20;
-
-#ifdef DOT11_N_SUPPORT
-					pEntry->HTCapability.MCSSet[0] = 0;
-					pEntry->HTCapability.MCSSet[1] = 0;
-
-					// If this Entry supports 802.11n, upgrade to HT rate.
-					if ((HtCapabilityLen != 0) && (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
-					{
-						UCHAR	j, bitmask; //k,bitmask;
-						CHAR    ii;
-
-						DBGPRINT(RT_DEBUG_OFF, ("DLS - PeerDlsRspAction Receive Peer HT Capable STA from %02x:%02x:%02x:%02x:%02x:%02x\n",
-									SA[0], SA[1], SA[2], SA[3], SA[4], SA[5]));
-
-						if ((HtCapability.HtCapInfo.GF) && (pAd->CommonCfg.DesiredHtPhy.GF))
-						{
-							pEntry->MaxHTPhyMode.field.MODE = MODE_HTGREENFIELD;
-						}
-						else
-						{
-							pEntry->MaxHTPhyMode.field.MODE = MODE_HTMIX;
-							pAd->MacTab.fAnyStationNonGF = TRUE;
-							pAd->CommonCfg.AddHTInfo.AddHtInfo2.NonGfPresent = 1;
-						}
-
-						if ((HtCapability.HtCapInfo.ChannelWidth) && (pAd->CommonCfg.DesiredHtPhy.ChannelWidth))
-						{
-							pEntry->MaxHTPhyMode.field.BW= BW_40;
-							pEntry->MaxHTPhyMode.field.ShortGI = ((pAd->CommonCfg.DesiredHtPhy.ShortGIfor40)&(HtCapability.HtCapInfo.ShortGIfor40));
-						}
-						else
-						{
-							pEntry->MaxHTPhyMode.field.BW = BW_20;
-							pEntry->MaxHTPhyMode.field.ShortGI = ((pAd->CommonCfg.DesiredHtPhy.ShortGIfor20)&(HtCapability.HtCapInfo.ShortGIfor20));
-							pAd->MacTab.fAnyStation20Only = TRUE;
-						}
-
-						// find max fixed rate
-						for (ii=15; ii>=0; ii--)
-						{
-							j = ii/8;
-							bitmask = (1<<(ii-(j*8)));
-							if ( (pAd->StaCfg.DesiredHtPhyInfo.MCSSet[j]&bitmask) && (HtCapability.MCSSet[j]&bitmask))
-							{
-								pEntry->MaxHTPhyMode.field.MCS = ii;
-								break;
-							}
-							if (ii==0)
-								break;
-						}
-
-						if (pAd->StaCfg.DesiredTransmitSetting.field.MCS != MCS_AUTO)
-						{
-							printk("@@@ pAd->CommonCfg.RegTransmitSetting.field.MCS = %d\n",
-								pAd->StaCfg.DesiredTransmitSetting.field.MCS);
-							if (pAd->StaCfg.DesiredTransmitSetting.field.MCS == 32)
-							{
-								// Fix MCS as HT Duplicated Mode
-								pEntry->MaxHTPhyMode.field.BW = 1;
-								pEntry->MaxHTPhyMode.field.MODE = MODE_HTMIX;
-								pEntry->MaxHTPhyMode.field.STBC = 0;
-								pEntry->MaxHTPhyMode.field.ShortGI = 0;
-								pEntry->MaxHTPhyMode.field.MCS = 32;
-							}
-							else if (pEntry->MaxHTPhyMode.field.MCS > pAd->StaCfg.HTPhyMode.field.MCS)
-							{
-								// STA supports fixed MCS
-								pEntry->MaxHTPhyMode.field.MCS = pAd->StaCfg.HTPhyMode.field.MCS;
-							}
-						}
-
-						pEntry->MaxHTPhyMode.field.STBC = (HtCapability.HtCapInfo.RxSTBC & (pAd->CommonCfg.DesiredHtPhy.TxSTBC));
-						pEntry->MpduDensity = HtCapability.HtCapParm.MpduDensity;
-						pEntry->MaxRAmpduFactor = HtCapability.HtCapParm.MaxRAmpduFactor;
-						pEntry->MmpsMode = (UCHAR)HtCapability.HtCapInfo.MimoPs;
-						pEntry->AMsduSize = (UCHAR)HtCapability.HtCapInfo.AMsduSize;
-						pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word;
-
-						if (HtCapability.HtCapInfo.ShortGIfor20)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI20_CAPABLE);
-						if (HtCapability.HtCapInfo.ShortGIfor40)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI40_CAPABLE);
-						if (HtCapability.HtCapInfo.TxSTBC)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_TxSTBC_CAPABLE);
-						if (HtCapability.HtCapInfo.RxSTBC)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RxSTBC_CAPABLE);
-						if (HtCapability.ExtHtCapInfo.PlusHTC)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_HTC_CAPABLE);
-						if (pAd->CommonCfg.bRdg && HtCapability.ExtHtCapInfo.RDGSupport)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RDG_CAPABLE);
-						if (HtCapability.ExtHtCapInfo.MCSFeedback == 0x03)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_MCSFEEDBACK_CAPABLE);
-
-						NdisMoveMemory(&pEntry->HTCapability, &HtCapability, sizeof(HT_CAPABILITY_IE));
-					}
-#endif // DOT11_N_SUPPORT //
-
-					pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word;
-					pEntry->CurrTxRate = pEntry->MaxSupportedRate;
-					CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_WMM_CAPABLE);
-
-					if (pAd->StaCfg.bAutoTxRateSwitch == TRUE)
-					{
-						PUCHAR pTable;
-						UCHAR TableSize = 0;
-
-						MlmeSelectTxRateTable(pAd, pEntry, &pTable, &TableSize, &pEntry->CurrTxRateIndex);
-						pEntry->bAutoTxRateSwitch = TRUE;
-					}
-					else
-					{
-						pEntry->HTPhyMode.field.MODE	= pAd->StaCfg.HTPhyMode.field.MODE;
-						pEntry->HTPhyMode.field.MCS	= pAd->StaCfg.HTPhyMode.field.MCS;
-						pEntry->bAutoTxRateSwitch = FALSE;
-
-						RTMPUpdateLegacyTxSetting((UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode, pEntry);
-					}
-					pEntry->RateLen = SupportedRatesLen;
-
-					if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-					{
-						// If support WPA or WPA2, start STAKey hand shake,
-						// If failed hand shake, just tear down peer DLS
-						if (RTMPSendSTAKeyRequest(pAd, pAd->StaCfg.DLSEntry[i].MacAddr) != NDIS_STATUS_SUCCESS)
-						{
-							MLME_DLS_REQ_STRUCT	MlmeDlsReq;
-							USHORT				reason = REASON_QOS_CIPHER_NOT_SUPPORT;
-
-							DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-							MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-							pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
-							pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-							DBGPRINT(RT_DEBUG_ERROR,("DLS - PeerDlsRspAction failed when call RTMPSendSTAKeyRequest \n"));
-						}
-						else
-						{
-							pAd->StaCfg.DLSEntry[i].Status = DLS_WAIT_KEY;
-							DBGPRINT(RT_DEBUG_TRACE,("DLS - waiting for STAKey handshake procedure\n"));
-						}
-					}
-					else
-					{
-						RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-						pAd->StaCfg.DLSEntry[i].Status = DLS_FINISH;
-						DBGPRINT(RT_DEBUG_TRACE,("DLS - PeerDlsRspAction() from %02x:%02x:%02x:%02x:%02x:%02x Succeed with WEP or no security\n", SA[0], SA[1], SA[2], SA[3], SA[4], SA[5]));
-					}
-					pAd->StaCfg.DLSEntry[i].Sequence = 0;
-					if (HtCapabilityLen != 0)
-						pAd->StaCfg.DLSEntry[i].bHTCap = TRUE;
-					else
-						pAd->StaCfg.DLSEntry[i].bHTCap = FALSE;
-				}
-				else
-				{
-					// DLS setup procedure failed.
-					pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
-					pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-					RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-					DBGPRINT(RT_DEBUG_ERROR,("DLS - PeerDlsRspAction failed with StatusCode=%d \n", StatusCode));
-				}
-			}
-		}
-	}
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID MlmeDlsTearDownAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-	PUCHAR			pOutBuffer = NULL;
-	NDIS_STATUS		NStatus;
-	ULONG			FrameLen = 0;
-	UCHAR			Category = CATEGORY_DLS;
-	UCHAR			Action = ACTION_DLS_TEARDOWN;
-	USHORT			ReasonCode = REASON_QOS_UNSPECIFY;
-	HEADER_802_11	DlsTearDownHdr;
-	PRT_802_11_DLS	pDLS;
-	BOOLEAN			TimerCancelled;
-	UCHAR			i;
-
-	if(!MlmeDlsReqSanity(pAd, Elem->Msg, Elem->MsgLen, &pDLS, &ReasonCode))
-		return;
-
-	DBGPRINT(RT_DEBUG_TRACE,("DLS - MlmeDlsTearDownAction() with ReasonCode=%d \n", ReasonCode));
-
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-	if (NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("DLS - MlmeDlsTearDownAction() allocate memory failed \n"));
-		return;
-	}
-
-	ActHeaderInit(pAd, &DlsTearDownHdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
-
-	// Build basic frame first
-	MakeOutgoingFrame(pOutBuffer,				&FrameLen,
-					sizeof(HEADER_802_11),		&DlsTearDownHdr,
-					1,							&Category,
-					1,							&Action,
-					6,							&pDLS->MacAddr,
-					6,							pAd->CurrentAddress,
-					2,							&ReasonCode,
-					END_OF_ARGS);
-
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-	RTMPCancelTimer(&pDLS->Timer, &TimerCancelled);
-
-	// Remove key in local dls table entry
-	for (i = 0; i < MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-	{
-		if (MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
-		{
-			MacTableDeleteDlsEntry(pAd, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID, pAd->StaCfg.DLSEntry[i].MacAddr);
-		}
-	}
-
-	// clear peer dls table entry
-	for (i = MAX_NUM_OF_INIT_DLS_ENTRY; i < MAX_NUM_OF_DLS_ENTRY; i++)
-	{
-		if (MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
-		{
-			pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-			pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-			RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-			MacTableDeleteDlsEntry(pAd, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID, pAd->StaCfg.DLSEntry[i].MacAddr);
-		}
-	}
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID PeerDlsTearDownAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR			DA[MAC_ADDR_LEN], SA[MAC_ADDR_LEN];
-	USHORT			ReasonCode;
-	UINT			i;
-	BOOLEAN			TimerCancelled;
-
-	if (!pAd->CommonCfg.bDLSCapable)
-		return;
-
-	if (!INFRA_ON(pAd))
-		return;
-
-	if (!PeerDlsTearDownSanity(pAd, Elem->Msg, Elem->MsgLen, DA, SA, &ReasonCode))
-		return;
-
-	DBGPRINT(RT_DEBUG_TRACE,("DLS - PeerDlsTearDownAction() from %02x:%02x:%02x:%02x:%02x:%02x with ReasonCode=%d\n", SA[0], SA[1], SA[2], SA[3], SA[4], SA[5], ReasonCode));
-
-	// clear local dls table entry
-	for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-	{
-		if (pAd->StaCfg.DLSEntry[i].Valid && MAC_ADDR_EQUAL(SA, pAd->StaCfg.DLSEntry[i].MacAddr))
-		{
-			pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-			pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-			RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-			//AsicDelWcidTab(pAd, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID);
-			//AsicRemovePairwiseKeyEntry(pAd, BSS0, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID);
-			MacTableDeleteDlsEntry(pAd, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID, pAd->StaCfg.DLSEntry[i].MacAddr);
-		}
-	}
-
-	// clear peer dls table entry
-	for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
-	{
-		if (pAd->StaCfg.DLSEntry[i].Valid && MAC_ADDR_EQUAL(SA, pAd->StaCfg.DLSEntry[i].MacAddr))
-		{
-			pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-			pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-			RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-			//AsicDelWcidTab(pAd, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID);
-			//AsicRemovePairwiseKeyEntry(pAd, BSS0, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID);
-			MacTableDeleteDlsEntry(pAd, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID, pAd->StaCfg.DLSEntry[i].MacAddr);
-		}
-	}
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID RTMPCheckDLSTimeOut(
-	IN PRTMP_ADAPTER	pAd)
-{
-	ULONG				i;
-	MLME_DLS_REQ_STRUCT	MlmeDlsReq;
-	USHORT				reason = REASON_QOS_UNSPECIFY;
-
-	if (! pAd->CommonCfg.bDLSCapable)
-		return;
-
-	if (! INFRA_ON(pAd))
-		return;
-
-	// If timeout value is equaled to zero, it means always not be timeout.
-
-	// update local dls table entry
-	for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-	{
-		if ((pAd->StaCfg.DLSEntry[i].Valid) && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH)
-			&& (pAd->StaCfg.DLSEntry[i].TimeOut != 0))
-		{
-			pAd->StaCfg.DLSEntry[i].CountDownTimer --;
-
-			if (pAd->StaCfg.DLSEntry[i].CountDownTimer == 0)
-			{
-				reason = REASON_QOS_REQUEST_TIMEOUT;
-				pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-				pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-				DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-				MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-			}
-		}
-	}
-
-	// update peer dls table entry
-	for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
-	{
-		if ((pAd->StaCfg.DLSEntry[i].Valid) && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH)
-			&& (pAd->StaCfg.DLSEntry[i].TimeOut != 0))
-		{
-			pAd->StaCfg.DLSEntry[i].CountDownTimer --;
-
-			if (pAd->StaCfg.DLSEntry[i].CountDownTimer == 0)
-			{
-				reason = REASON_QOS_REQUEST_TIMEOUT;
-				pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-				pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-				DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-				MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-			}
-		}
-	}
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-BOOLEAN RTMPRcvFrameDLSCheck(
-	IN PRTMP_ADAPTER	pAd,
-	IN PHEADER_802_11	pHeader,
-	IN ULONG			Len,
-	IN PRT28XX_RXD_STRUC	pRxD)
-{
-	ULONG			i;
-	BOOLEAN			bFindEntry = FALSE;
-	BOOLEAN			bSTAKeyFrame = FALSE;
-	PEAPOL_PACKET	pEap;
-	PUCHAR			pProto, pAddr = NULL;
-	PUCHAR			pSTAKey = NULL;
-	UCHAR			ZeroReplay[LEN_KEY_DESC_REPLAY];
-	UCHAR			Mic[16], OldMic[16];
-	UCHAR			digest[80];
-	UCHAR			DlsPTK[80];
-	UCHAR			temp[64];
-	BOOLEAN			TimerCancelled;
-	CIPHER_KEY		PairwiseKey;
-
-
-	if (! pAd->CommonCfg.bDLSCapable)
-		return bSTAKeyFrame;
-
-	if (! INFRA_ON(pAd))
-		return bSTAKeyFrame;
-
-	if (! (pHeader->FC.SubType & 0x08))
-		return bSTAKeyFrame;
-
-	if (Len < LENGTH_802_11 + 6 + 2 + 2)
-		return bSTAKeyFrame;
-
-	pProto	= (PUCHAR)pHeader + LENGTH_802_11 + 2 + 6;	// QOS Control field , 0xAA 0xAA 0xAA 0x00 0x00 0x00
-	pAddr	= pHeader->Addr2;
-
-	// L2PAD bit on will pad 2 bytes at LLC
-	if (pRxD->L2PAD)
-	{
-		pProto += 2;
-	}
-
-	if (RTMPEqualMemory(EAPOL, pProto, 2) && (pAd->StaCfg.AuthMode >=  Ndis802_11AuthModeWPA))
-	{
-		pEap = (PEAPOL_PACKET) (pProto + 2);
-
-		DBGPRINT(RT_DEBUG_TRACE,("DLS - Sniff Len=%ld, DataLen=%d, KeyMic=%d, Install=%d, KeyAck=%d, Secure=%d, EKD_DL=%d, Error=%d, Request=%d\n", Len,
-			                                                             (LENGTH_802_11 + 6 + 2 + 2 + sizeof(EAPOL_PACKET) - MAX_LEN_OF_RSNIE + 16),
-			                                                             pEap->KeyDesc.KeyInfo.KeyMic,
-			                                                             pEap->KeyDesc.KeyInfo.Install,
-			                                                             pEap->KeyDesc.KeyInfo.KeyAck,
-			                                                             pEap->KeyDesc.KeyInfo.Secure,
-			                                                             pEap->KeyDesc.KeyInfo.EKD_DL,
-			                                                             pEap->KeyDesc.KeyInfo.Error,
-			                                                             pEap->KeyDesc.KeyInfo.Request));
-
-		if ((Len >= (LENGTH_802_11 + 6 + 2 + 2 + sizeof(EAPOL_PACKET) - MAX_LEN_OF_RSNIE + 16)) && pEap->KeyDesc.KeyInfo.KeyMic
-			&& pEap->KeyDesc.KeyInfo.Install && pEap->KeyDesc.KeyInfo.KeyAck && pEap->KeyDesc.KeyInfo.Secure
-			&& pEap->KeyDesc.KeyInfo.EKD_DL && !pEap->KeyDesc.KeyInfo.Error && !pEap->KeyDesc.KeyInfo.Request)
-		{
-			// First validate replay counter, only accept message with larger replay counter
-			// Let equal pass, some AP start with all zero replay counter
-			NdisZeroMemory(ZeroReplay, LEN_KEY_DESC_REPLAY);
-			if ((RTMPCompareMemory(pEap->KeyDesc.ReplayCounter, pAd->StaCfg.ReplayCounter, LEN_KEY_DESC_REPLAY) != 1) &&
-				(RTMPCompareMemory(pEap->KeyDesc.ReplayCounter, ZeroReplay, LEN_KEY_DESC_REPLAY) != 0))
-				return bSTAKeyFrame;
-
-			//RTMPMoveMemory(pAd->StaCfg.ReplayCounter, pEap->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-			RTMPMoveMemory(pAd->StaCfg.DlsReplayCounter, pEap->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-			DBGPRINT(RT_DEBUG_TRACE,("DLS - Sniff replay counter (%02x-%02x-%02x-%02x-%02x-%02x-%02x-%02x) Len=%ld, KeyDataLen=%d\n",
-				pAd->StaCfg.ReplayCounter[0], pAd->StaCfg.ReplayCounter[1], pAd->StaCfg.ReplayCounter[2],
-				pAd->StaCfg.ReplayCounter[3], pAd->StaCfg.ReplayCounter[4],	pAd->StaCfg.ReplayCounter[5],
-				pAd->StaCfg.ReplayCounter[6], pAd->StaCfg.ReplayCounter[7], Len, pEap->KeyDesc.KeyData[1]));
-
-			// put these code segment to get the replay counter
-			if (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED)
-				return bSTAKeyFrame;
-
-			// Check MIC value
-			// Save the MIC and replace with zero
-			// use proprietary PTK
-			NdisZeroMemory(temp, 64);
-			NdisMoveMemory(temp, "IEEE802.11 WIRELESS ACCESS POINT", 32);
-			WpaCountPTK(pAd, temp, temp, pAd->CommonCfg.Bssid, temp, pAd->CurrentAddress, DlsPTK, LEN_PTK);
-
-			NdisMoveMemory(OldMic, pEap->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
-			NdisZeroMemory(pEap->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
-			if (pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled)
-			{
-				// AES
-				HMAC_SHA1((PUCHAR) pEap, pEap->Body_Len[1] + 4, DlsPTK, LEN_EAP_MICK, digest);
-				NdisMoveMemory(Mic,	digest,	LEN_KEY_DESC_MIC);
-			}
-			else
-			{
-				hmac_md5(DlsPTK, LEN_EAP_MICK, (PUCHAR) pEap, pEap->Body_Len[1] + 4, Mic);
-			}
-
-			if (!NdisEqualMemory(OldMic, Mic, LEN_KEY_DESC_MIC))
-			{
-				DBGPRINT(RT_DEBUG_ERROR, ("MIC Different in Msg1 of STAKey handshake! \n"));
-				return bSTAKeyFrame;
-			}
-			else
-				DBGPRINT(RT_DEBUG_TRACE, ("MIC VALID in Msg1 of STAKey handshake! \n"));
-#if 1
-			if ((pEap->KeyDesc.KeyData[0] == 0xDD) && (pEap->KeyDesc.KeyData[2] == 0x00) && (pEap->KeyDesc.KeyData[3] == 0x0C)
-				&& (pEap->KeyDesc.KeyData[4] == 0x43) && (pEap->KeyDesc.KeyData[5] == 0x02))
-			{
-				pAddr			= pEap->KeyDesc.KeyData + 8;		// Tpe(1), Len(1), OUI(3), DataType(1), Reserved(2)
-				pSTAKey			= pEap->KeyDesc.KeyData + 14;	// Tpe(1), Len(1), OUI(3), DataType(1), Reserved(2), STAKey_Mac_Addr(6)
-
-				DBGPRINT(RT_DEBUG_TRACE,("DLS - Receive STAKey Message-1 from %02x:%02x:%02x:%02x:%02x:%02x Len=%ld, KeyDataLen=%d\n",
-					pAddr[0], pAddr[1], pAddr[2], pAddr[3], pAddr[4], pAddr[5], Len, pEap->KeyDesc.KeyData[1]));
-
-				bSTAKeyFrame = TRUE;
-			}
-#else
-			if ((pEap->KeyDesc.KeyData[0] == 0xDD) && (pEap->KeyDesc.KeyData[2] == 0x00) && (pEap->KeyDesc.KeyData[3] == 0x0F)
-				&& (pEap->KeyDesc.KeyData[4] == 0xAC) && (pEap->KeyDesc.KeyData[5] == 0x02))
-			{
-				pAddr			= pEap->KeyDesc.KeyData + 8;		// Tpe(1), Len(1), OUI(3), DataType(1), Reserved(2)
-				pSTAKey			= pEap->KeyDesc.KeyData + 14;	// Tpe(1), Len(1), OUI(3), DataType(1), Reserved(2), STAKey_Mac_Addr(6)
-
-				DBGPRINT(RT_DEBUG_TRACE,("DLS - Receive STAKey Message-1 from %02x:%02x:%02x:%02x:%02x:%02x Len=%d, KeyDataLen=%d\n",
-					pAddr[0], pAddr[1], pAddr[2], pAddr[3], pAddr[4], pAddr[5], Len, pEap->KeyDesc.KeyData[1]));
-
-				bSTAKeyFrame = TRUE;
-			}
-#endif
-
-		}
-		else if (Len >= (LENGTH_802_11 + 6 + 2 + 2 + sizeof(EAPOL_PACKET) - MAX_LEN_OF_RSNIE))
-		{
-#if 0
-			RTMPMoveMemory(pAd->StaCfg.ReplayCounter, pEap->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-
-#endif
-			RTMPMoveMemory(pAd->StaCfg.DlsReplayCounter, pEap->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-			DBGPRINT(RT_DEBUG_TRACE,("DLS - Sniff replay counter 2(%02x-%02x-%02x-%02x-%02x-%02x-%02x-%02x) Len=%ld, KeyDataLen=%d\n",
-				pAd->StaCfg.ReplayCounter[0], pAd->StaCfg.ReplayCounter[1], pAd->StaCfg.ReplayCounter[2],
-				pAd->StaCfg.ReplayCounter[3], pAd->StaCfg.ReplayCounter[4],	pAd->StaCfg.ReplayCounter[5],
-				pAd->StaCfg.ReplayCounter[6], pAd->StaCfg.ReplayCounter[7], Len, pEap->KeyDesc.KeyData[1]));
-
-		}
-	}
-
-	// If timeout value is equaled to zero, it means always not be timeout.
-	// update local dls table entry
-	for (i= 0; i < MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-	{
-		if (pAd->StaCfg.DLSEntry[i].Valid && MAC_ADDR_EQUAL(pAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
-		{
-			if (bSTAKeyFrame)
-			{
-				PMAC_TABLE_ENTRY pEntry;
-
-				// STAKey frame, add pairwise key table
-				pAd->StaCfg.DLSEntry[i].Status = DLS_FINISH;
-				RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-
-				PairwiseKey.KeyLen = LEN_TKIP_EK;
-				NdisMoveMemory(PairwiseKey.Key, &pSTAKey[0], LEN_TKIP_EK);
-				NdisMoveMemory(PairwiseKey.TxMic, &pSTAKey[16], LEN_TKIP_RXMICK);
-				NdisMoveMemory(PairwiseKey.RxMic, &pSTAKey[24], LEN_TKIP_TXMICK);
-
-				PairwiseKey.CipherAlg = pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg;
-
-				pEntry = DlsEntryTableLookup(pAd, pAd->StaCfg.DLSEntry[i].MacAddr, TRUE);
-				//AsicAddKeyEntry(pAd, (USHORT)(i + 2), BSS0, 0, &PairwiseKey, TRUE, TRUE);	// reserve 0 for multicast, 1 for unicast
-				//AsicUpdateRxWCIDTable(pAd, (USHORT)(i + 2), pAddr);
-				// Add Pair-wise key to Asic
-            	AsicAddPairwiseKeyEntry(pAd,
-										pAd->StaCfg.DLSEntry[i].MacAddr,
-										(UCHAR)pAd->StaCfg.DLSEntry[i].MacTabMatchWCID,
-										&PairwiseKey);
-
-				RTMPAddWcidAttributeEntry(pAd,
-										  BSS0,
-										  0,
-										  PairwiseKey.CipherAlg,
-										  pEntry);
-
-				NdisMoveMemory(&pEntry->PairwiseKey, &PairwiseKey, sizeof(CIPHER_KEY));
-				DBGPRINT(RT_DEBUG_TRACE,("DLS - Receive STAKey Message-1 (Peer STA MAC Address STAKey) \n"));
-
-				RTMPSendSTAKeyHandShake(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
-
-				DBGPRINT(RT_DEBUG_TRACE,("DLS - Finish STAKey handshake procedure (Initiator side)\n"));
-			}
-			else
-			{
-				// Data frame, update timeout value
-				if (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH)
-				{
-					pAd->StaCfg.DLSEntry[i].CountDownTimer = pAd->StaCfg.DLSEntry[i].TimeOut;
-					//AsicUpdateRxWCIDTable(pAd, (USHORT)(i + 2), pAddr);
-				}
-			}
-
-			bFindEntry = TRUE;
-		}
-	}
-
-	// update peer dls table entry
-	for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
-	{
-		if (pAd->StaCfg.DLSEntry[i].Valid && MAC_ADDR_EQUAL(pAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
-		{
-			if (bSTAKeyFrame)
-			{
-				PMAC_TABLE_ENTRY pEntry = NULL;
-
-				// STAKey frame, add pairwise key table, and send STAkey Msg-2
-				pAd->StaCfg.DLSEntry[i].Status = DLS_FINISH;
-				RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-
-				PairwiseKey.KeyLen = LEN_TKIP_EK;
-				NdisMoveMemory(PairwiseKey.Key, &pSTAKey[0], LEN_TKIP_EK);
-				NdisMoveMemory(PairwiseKey.TxMic, &pSTAKey[16], LEN_TKIP_RXMICK);
-				NdisMoveMemory(PairwiseKey.RxMic, &pSTAKey[24], LEN_TKIP_TXMICK);
-
-				PairwiseKey.CipherAlg = pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg;
-
-				pEntry = DlsEntryTableLookup(pAd, pAd->StaCfg.DLSEntry[i].MacAddr, TRUE);
-				//AsicAddKeyEntry(pAd, (USHORT)(i + 2), BSS0, 0, &PairwiseKey, TRUE, TRUE);	// reserve 0 for multicast, 1 for unicast
-				//AsicUpdateRxWCIDTable(pAd, (USHORT)(i + 2), pAddr);
-				// Add Pair-wise key to Asic
-            	AsicAddPairwiseKeyEntry(pAd,
-										pAd->StaCfg.DLSEntry[i].MacAddr,
-										(UCHAR)pAd->StaCfg.DLSEntry[i].MacTabMatchWCID,
-										&PairwiseKey);
-
-				RTMPAddWcidAttributeEntry(pAd,
-										  BSS0,
-										  0,
-										  PairwiseKey.CipherAlg,
-										  pEntry);
-				NdisMoveMemory(&pEntry->PairwiseKey, &PairwiseKey, sizeof(CIPHER_KEY));
-				DBGPRINT(RT_DEBUG_TRACE,("DLS - Receive STAKey Message-1 (Initiator STA MAC Address STAKey)\n"));
-
-				// If support WPA or WPA2, start STAKey hand shake,
-				// If failed hand shake, just tear down peer DLS
-				if (RTMPSendSTAKeyHandShake(pAd, pAddr) != NDIS_STATUS_SUCCESS)
-				{
-					MLME_DLS_REQ_STRUCT	MlmeDlsReq;
-					USHORT				reason = REASON_QOS_CIPHER_NOT_SUPPORT;
-
-					pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-					pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-					DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-					MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-				}
-				else
-				{
-					DBGPRINT(RT_DEBUG_TRACE,("DLS - Finish STAKey handshake procedure (Peer side)\n"));
-				}
-			}
-			else
-			{
-				// Data frame, update timeout value
-				if (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH)
-				{
-					pAd->StaCfg.DLSEntry[i].CountDownTimer = pAd->StaCfg.DLSEntry[i].TimeOut;
-				}
-			}
-
-			bFindEntry = TRUE;
-		}
-	}
-
-
-	return bSTAKeyFrame;
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Check if the frame can be sent through DLS direct link interface
-
-	Arguments:
-		pAd		Pointer	to adapter
-
-	Return Value:
-		DLS entry index
-
-	Note:
-
-	========================================================================
-*/
-INT	RTMPCheckDLSFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN  PUCHAR          pDA)
-{
-	INT rval = -1;
-	INT	i;
-
-	if (!pAd->CommonCfg.bDLSCapable)
-		return rval;
-
-	if (!INFRA_ON(pAd))
-		return rval;
-
-	do{
-		// check local dls table entry
-		for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-		{
-			if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH) &&
-				MAC_ADDR_EQUAL(pDA, pAd->StaCfg.DLSEntry[i].MacAddr))
-			{
-				rval = i;
-				break;
-			}
-		}
-
-		// check peer dls table entry
-		for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
-		{
-			if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH) &&
-				MAC_ADDR_EQUAL(pDA, pAd->StaCfg.DLSEntry[i].MacAddr))
-			{
-				rval = i;
-				break;
-			}
-		}
-	} while (FALSE);
-
-	return rval;
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID RTMPSendDLSTearDownFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN  PUCHAR          pDA)
-{
-	PUCHAR			pOutBuffer = NULL;
-	NDIS_STATUS		NStatus;
-	HEADER_802_11	DlsTearDownHdr;
-	ULONG			FrameLen = 0;
-	USHORT			Reason = REASON_QOS_QSTA_LEAVING_QBSS;
-	UCHAR			Category = CATEGORY_DLS;
-	UCHAR			Action = ACTION_DLS_TEARDOWN;
-	UCHAR			i = 0;
-
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS) ||
-		RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS))
-		return;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Send DLS TearDown Frame \n"));
-
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-	if (NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("ASSOC - RTMPSendDLSTearDownFrame() allocate memory failed \n"));
-		return;
-	}
-
-	ActHeaderInit(pAd, &DlsTearDownHdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
-	MakeOutgoingFrame(pOutBuffer,				&FrameLen,
-					sizeof(HEADER_802_11),		&DlsTearDownHdr,
-					1,							&Category,
-					1,							&Action,
-					6,							pDA,
-					6,							pAd->CurrentAddress,
-					2,							&Reason,
-					END_OF_ARGS);
-
-	MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-	// Remove key in local dls table entry
-	for (i = 0; i < MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-	{
-		if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH)
-			&& MAC_ADDR_EQUAL(pDA, pAd->StaCfg.DLSEntry[i].MacAddr))
-		{
-			MacTableDeleteDlsEntry(pAd, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID, pAd->StaCfg.DLSEntry[i].MacAddr);
-		}
-	}
-
-	// Remove key in peer dls table entry
-	for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
-	{
-		if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH)
-			&& MAC_ADDR_EQUAL(pDA, pAd->StaCfg.DLSEntry[i].MacAddr))
-		{
-			MacTableDeleteDlsEntry(pAd, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID, pAd->StaCfg.DLSEntry[i].MacAddr);
-		}
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Send DLS TearDown Frame and remove key in (i=%d) \n", i));
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-NDIS_STATUS RTMPSendSTAKeyRequest(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pDA)
-{
-	UCHAR				Header802_3[14];
-	NDIS_STATUS			NStatus;
-	ULONG				FrameLen = 0;
-	EAPOL_PACKET		Packet;
-	UCHAR				Mic[16];
-	UCHAR				digest[80];
-	PUCHAR				pOutBuffer = NULL;
-	PNDIS_PACKET		pNdisPacket;
-	UCHAR				temp[64];
-	UCHAR				DlsPTK[80];
-
-	DBGPRINT(RT_DEBUG_TRACE,("DLS - RTMPSendSTAKeyRequest() to %02x:%02x:%02x:%02x:%02x:%02x\n", pDA[0], pDA[1], pDA[2], pDA[3], pDA[4], pDA[5]));
-
-	pAd->Sequence ++;
-	MAKE_802_3_HEADER(Header802_3, pAd->CommonCfg.Bssid, pAd->CurrentAddress, EAPOL);
-
-	// Zero message body
-	NdisZeroMemory(&Packet, sizeof(Packet));
-	Packet.ProVer = EAPOL_VER;
-	Packet.ProType    = EAPOLKey;
-	Packet.Body_Len[1]  = sizeof(KEY_DESCRIPTER) - MAX_LEN_OF_RSNIE + 6 + MAC_ADDR_LEN;		// data field contain KDE andPeer MAC address
-
-	// STAKey Message is as EAPOL-Key(1,1,0,0,G/0,0,0, MIC, 0,Peer MAC KDE)
-	if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK))
-    {
-        Packet.KeyDesc.Type = WPA1_KEY_DESC;
-    }
-    else if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK))
-    {
-        Packet.KeyDesc.Type = WPA2_KEY_DESC;
-    }
-
-	// Key descriptor version
-	Packet.KeyDesc.KeyInfo.KeyDescVer =
-		(((pAd->StaCfg.PairCipher == Ndis802_11Encryption3Enabled) || (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled)) ? (DESC_TYPE_AES) : (DESC_TYPE_TKIP));
-
-	Packet.KeyDesc.KeyInfo.KeyMic	= 1;
-	Packet.KeyDesc.KeyInfo.Secure	= 1;
-	Packet.KeyDesc.KeyInfo.Request	= 1;
-
-	Packet.KeyDesc.KeyDataLen[1]	= 12;
-
-	// use our own OUI to distinguish proprietary with standard.
-	Packet.KeyDesc.KeyData[0]		= 0xDD;
-	Packet.KeyDesc.KeyData[1]		= 0x0A;
-	Packet.KeyDesc.KeyData[2]		= 0x00;
-	Packet.KeyDesc.KeyData[3]		= 0x0C;
-	Packet.KeyDesc.KeyData[4]		= 0x43;
-	Packet.KeyDesc.KeyData[5]		= 0x03;
-	NdisMoveMemory(&Packet.KeyDesc.KeyData[6], pDA, MAC_ADDR_LEN);
-
-	NdisMoveMemory(Packet.KeyDesc.ReplayCounter, pAd->StaCfg.DlsReplayCounter, LEN_KEY_DESC_REPLAY);
-
-	// Allocate buffer for transmitting message
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);
-	if (NStatus	!= NDIS_STATUS_SUCCESS)
-		return NStatus;
-
-	// Prepare EAPOL frame for MIC calculation
-	// Be careful, only EAPOL frame is counted for MIC calculation
-	MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-		              Packet.Body_Len[1] + 4,    &Packet,
-		              END_OF_ARGS);
-
-	// use proprietary PTK
-	NdisZeroMemory(temp, 64);
-	NdisMoveMemory(temp, "IEEE802.11 WIRELESS ACCESS POINT", 32);
-	WpaCountPTK(pAd, temp, temp, pAd->CommonCfg.Bssid, temp, pAd->CurrentAddress, DlsPTK, LEN_PTK);
-
-	// calculate MIC
-	if (pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled)
-	{
-		// AES
-		NdisZeroMemory(digest,	sizeof(digest));
-		HMAC_SHA1(pOutBuffer, FrameLen, DlsPTK, LEN_EAP_MICK, digest);
-		NdisMoveMemory(Packet.KeyDesc.KeyMic, digest, LEN_KEY_DESC_MIC);
-	}
-	else
-	{
-		NdisZeroMemory(Mic,	sizeof(Mic));
-		hmac_md5(DlsPTK, LEN_EAP_MICK, pOutBuffer, FrameLen, Mic);
-		NdisMoveMemory(Packet.KeyDesc.KeyMic, Mic, LEN_KEY_DESC_MIC);
-	}
-
-	MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-	                  sizeof(Header802_3),	Header802_3,
-		              Packet.Body_Len[1] + 4,	&Packet,
-		              END_OF_ARGS);
-
-	NStatus = RTMPAllocateNdisPacket(pAd, &pNdisPacket, NULL, 0, pOutBuffer, FrameLen);
-	if (NStatus == NDIS_STATUS_SUCCESS)
-	{
-		RTMP_SET_PACKET_WCID(pNdisPacket, BSSID_WCID);
-		STASendPacket(pAd, pNdisPacket);
-		RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS);
-	}
-
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("RTMPSendSTAKeyRequest- Send STAKey request (NStatus=%x, FrameLen=%ld)\n", NStatus, FrameLen));
-
-	return NStatus;
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-NDIS_STATUS RTMPSendSTAKeyHandShake(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pDA)
-{
-	UCHAR				Header802_3[14];
-	NDIS_STATUS			NStatus;
-	ULONG				FrameLen = 0;
-	EAPOL_PACKET		Packet;
-	UCHAR				Mic[16];
-	UCHAR				digest[80];
-	PUCHAR				pOutBuffer = NULL;
-	PNDIS_PACKET		pNdisPacket;
-	UCHAR				temp[64];
-	UCHAR				DlsPTK[80];			// Due to dirver can not get PTK, use proprietary PTK
-
-	DBGPRINT(RT_DEBUG_TRACE,("DLS - RTMPSendSTAKeyHandShake() to %02x:%02x:%02x:%02x:%02x:%02x\n", pDA[0], pDA[1], pDA[2], pDA[3], pDA[4], pDA[5]));
-
-	pAd->Sequence ++;
-	MAKE_802_3_HEADER(Header802_3, pAd->CommonCfg.Bssid, pAd->CurrentAddress, EAPOL);
-
-	// Zero message body
-	NdisZeroMemory(&Packet, sizeof(Packet));
-	Packet.ProVer = EAPOL_VER;
-	Packet.ProType    = EAPOLKey;
-	Packet.Body_Len[1]  = sizeof(KEY_DESCRIPTER) - MAX_LEN_OF_RSNIE + 6 + MAC_ADDR_LEN;		// data field contain KDE and Peer MAC address
-
-	// STAKey Message is as EAPOL-Key(1,1,0,0,G/0,0,0, MIC, 0,Peer MAC KDE)
-	if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK))
-    {
-        Packet.KeyDesc.Type = WPA1_KEY_DESC;
-    }
-    else if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK))
-    {
-        Packet.KeyDesc.Type = WPA2_KEY_DESC;
-    }
-
-	// Key descriptor version
-	Packet.KeyDesc.KeyInfo.KeyDescVer =
-		(((pAd->StaCfg.PairCipher == Ndis802_11Encryption3Enabled) || (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled)) ? (DESC_TYPE_AES) : (DESC_TYPE_TKIP));
-
-	Packet.KeyDesc.KeyInfo.KeyMic	= 1;
-	Packet.KeyDesc.KeyInfo.Secure	= 1;
-
-	Packet.KeyDesc.KeyDataLen[1]	= 12;
-
-	// use our own OUI to distinguish proprietary with standard.
-	Packet.KeyDesc.KeyData[0]		= 0xDD;
-	Packet.KeyDesc.KeyData[1]		= 0x0A;
-	Packet.KeyDesc.KeyData[2]		= 0x00;
-	Packet.KeyDesc.KeyData[3]		= 0x0C;
-	Packet.KeyDesc.KeyData[4]		= 0x43;
-	Packet.KeyDesc.KeyData[5]		= 0x03;
-	NdisMoveMemory(&Packet.KeyDesc.KeyData[6], pDA, MAC_ADDR_LEN);
-
-	NdisMoveMemory(Packet.KeyDesc.ReplayCounter, pAd->StaCfg.DlsReplayCounter, LEN_KEY_DESC_REPLAY);
-
-	// Allocate buffer for transmitting message
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);
-	if (NStatus	!= NDIS_STATUS_SUCCESS)
-		return NStatus;
-
-	// Prepare EAPOL frame for MIC calculation
-	// Be careful, only EAPOL frame is counted for MIC calculation
-	MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-		              Packet.Body_Len[1] + 4,    &Packet,
-		              END_OF_ARGS);
-
-	// use proprietary PTK
-	NdisZeroMemory(temp, 64);
-	NdisMoveMemory(temp, "IEEE802.11 WIRELESS ACCESS POINT", 32);
-	WpaCountPTK(pAd, temp, temp, pAd->CommonCfg.Bssid, temp, pAd->CurrentAddress, DlsPTK, LEN_PTK);
-
-	// calculate MIC
-	if (pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled)
-	{
-		// AES
-		NdisZeroMemory(digest,	sizeof(digest));
-		HMAC_SHA1(pOutBuffer, FrameLen, DlsPTK, LEN_EAP_MICK, digest);
-		NdisMoveMemory(Packet.KeyDesc.KeyMic, digest, LEN_KEY_DESC_MIC);
-	}
-	else
-	{
-		NdisZeroMemory(Mic,	sizeof(Mic));
-		hmac_md5(DlsPTK, LEN_EAP_MICK, pOutBuffer, FrameLen, Mic);
-		NdisMoveMemory(Packet.KeyDesc.KeyMic, Mic, LEN_KEY_DESC_MIC);
-	}
-
-	MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-	                  sizeof(Header802_3),	Header802_3,
-		              Packet.Body_Len[1] + 4,	&Packet,
-		              END_OF_ARGS);
-
-	NStatus = RTMPAllocateNdisPacket(pAd, &pNdisPacket, NULL, 0, pOutBuffer, FrameLen);
-	if (NStatus == NDIS_STATUS_SUCCESS)
-	{
-		RTMP_SET_PACKET_WCID(pNdisPacket, BSSID_WCID);
-		STASendPacket(pAd, pNdisPacket);
-		RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS);
-	}
-
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("RTMPSendSTAKeyHandShake- Send STAKey Message-2 (NStatus=%x, FrameLen=%ld)\n", NStatus, FrameLen));
-
-	return NStatus;
-}
-
-VOID DlsTimeoutAction(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3)
-{
-	MLME_DLS_REQ_STRUCT		MlmeDlsReq;
-	USHORT					reason;
-	PRT_802_11_DLS			pDLS = (PRT_802_11_DLS)FunctionContext;
-	PRTMP_ADAPTER			pAd = pDLS->pAd;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("DlsTimeout - Tear down DLS links (%02x:%02x:%02x:%02x:%02x:%02x)\n",
-		pDLS->MacAddr[0], pDLS->MacAddr[1], pDLS->MacAddr[2], pDLS->MacAddr[3], pDLS->MacAddr[4], pDLS->MacAddr[5]));
-
-	if ((pDLS) && (pDLS->Valid))
-	{
-		reason			= REASON_QOS_REQUEST_TIMEOUT;
-		pDLS->Valid		= FALSE;
-		pDLS->Status	= DLS_NONE;
-		DlsParmFill(pAd, &MlmeDlsReq, pDLS, reason);
-		MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-		RT28XX_MLME_HANDLER(pAd);
-	}
-}
-
-/*
-================================================================
-Description : because DLS and CLI share the same WCID table in ASIC.
-Mesh entry also insert to pAd->MacTab.content[].  Such is marked as ValidAsDls = TRUE.
-Also fills the pairwise key.
-Because front MAX_AID_BA entries have direct mapping to BAEntry, which is only used as CLI. So we insert Dls
-from index MAX_AID_BA.
-================================================================
-*/
-MAC_TABLE_ENTRY *MacTableInsertDlsEntry(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR	pAddr,
-	IN  UINT	DlsEntryIdx)
-{
-	PMAC_TABLE_ENTRY pEntry = NULL;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("====> MacTableInsertDlsEntry\n"));
-	// if FULL, return
-	if (pAd->MacTab.Size >= MAX_LEN_OF_MAC_TABLE)
-		return NULL;
-
-	do
-	{
-		if((pEntry = DlsEntryTableLookup(pAd, pAddr, TRUE)) != NULL)
-			break;
-
-		// allocate one MAC entry
-		pEntry = MacTableInsertEntry(pAd, pAddr, DlsEntryIdx + MIN_NET_DEVICE_FOR_DLS, TRUE);
-		if (pEntry)
-		{
-			pAd->StaCfg.DLSEntry[DlsEntryIdx].MacTabMatchWCID = pEntry->Aid;
-			pEntry->MatchDlsEntryIdx = DlsEntryIdx;
-			pEntry->AuthMode = pAd->StaCfg.AuthMode;
-			pEntry->WepStatus = pAd->StaCfg.WepStatus;
-			pEntry->PortSecured = WPA_802_1X_PORT_SECURED;
-
-			DBGPRINT(RT_DEBUG_TRACE, ("MacTableInsertDlsEntry - allocate entry #%d, Total= %d\n",pEntry->Aid, pAd->MacTab.Size));
-
-			// If legacy WEP is used, set pair-wise cipherAlg into WCID attribute table for this entry
-			if ((pEntry->ValidAsDls) && (pEntry->WepStatus == Ndis802_11WEPEnabled))
-			{
-				UCHAR KeyIdx = 0;
-				UCHAR CipherAlg = 0;
-
-				KeyIdx	= pAd->StaCfg.DefaultKeyId;
-
-				CipherAlg 	= pAd->SharedKey[BSS0][KeyIdx].CipherAlg;
-
-				RTMPAddWcidAttributeEntry(pAd,
-											BSS0,
-											pAd->StaCfg.DefaultKeyId,
-											pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg,
-											pEntry);
-			}
-
-			break;
-		}
-	} while(FALSE);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<==== MacTableInsertDlsEntry\n"));
-
-	return pEntry;
-}
-
-
-/*
-	==========================================================================
-	Description:
-		Delete all Mesh Entry in pAd->MacTab
-	==========================================================================
- */
-BOOLEAN MacTableDeleteDlsEntry(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT wcid,
-	IN PUCHAR pAddr)
-{
-	DBGPRINT(RT_DEBUG_TRACE, ("====> MacTableDeleteDlsEntry\n"));
-
-	if (!VALID_WCID(wcid))
-		return FALSE;
-
-	MacTableDeleteEntry(pAd, wcid, pAddr);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<==== MacTableDeleteDlsEntry\n"));
-
-	return TRUE;
-}
-
-MAC_TABLE_ENTRY *DlsEntryTableLookup(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR	pAddr,
-	IN BOOLEAN	bResetIdelCount)
-{
-	ULONG HashIdx;
-	MAC_TABLE_ENTRY *pEntry = NULL;
-
-	RTMP_SEM_LOCK(&pAd->MacTabLock);
-	HashIdx = MAC_ADDR_HASH_INDEX(pAddr);
-	pEntry = pAd->MacTab.Hash[HashIdx];
-
-	while (pEntry)
-	{
-		if ((pEntry->ValidAsDls == TRUE)
-			&& MAC_ADDR_EQUAL(pEntry->Addr, pAddr))
-		{
-			if(bResetIdelCount)
-				pEntry->NoDataIdleCount = 0;
-			break;
-		}
-		else
-			pEntry = pEntry->pNext;
-	}
-
-	RTMP_SEM_UNLOCK(&pAd->MacTabLock);
-	return pEntry;
-}
-
-MAC_TABLE_ENTRY *DlsEntryTableLookupByWcid(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR	wcid,
-	IN PUCHAR	pAddr,
-	IN BOOLEAN	bResetIdelCount)
-{
-	ULONG DLsIndex;
-	PMAC_TABLE_ENTRY pCurEntry = NULL;
-	PMAC_TABLE_ENTRY pEntry = NULL;
-
-	if (!VALID_WCID(wcid))
-		return NULL;
-
-	RTMP_SEM_LOCK(&pAd->MacTabLock);
-
-	do
-	{
-		pCurEntry = &pAd->MacTab.Content[wcid];
-
-		DLsIndex = 0xff;
-		if ((pCurEntry) && (pCurEntry->ValidAsDls== TRUE))
-		{
-			DLsIndex = pCurEntry->MatchDlsEntryIdx;
-		}
-
-		if (DLsIndex == 0xff)
-			break;
-
-		if (MAC_ADDR_EQUAL(pCurEntry->Addr, pAddr))
-		{
-			if(bResetIdelCount)
-				pCurEntry->NoDataIdleCount = 0;
-			pEntry = pCurEntry;
-			break;
-		}
-	} while(FALSE);
-
-	RTMP_SEM_UNLOCK(&pAd->MacTabLock);
-
-	return pEntry;
-}
-
-INT Set_DlsEntryInfo_Display_Proc(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR arg)
-{
-	INT i;
-
-	printk("\n%-19s%-8s\n", "MAC", "TIMEOUT\n");
-	for (i=0; i<MAX_NUM_OF_DLS_ENTRY; i++)
-	{
-		if ((pAd->StaCfg.DLSEntry[i].Valid) && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
-		{
-			PMAC_TABLE_ENTRY pEntry = &pAd->MacTab.Content[pAd->StaCfg.DLSEntry[i].MacTabMatchWCID];
-
-			printk("%02x:%02x:%02x:%02x:%02x:%02x  ",
-				pAd->StaCfg.DLSEntry[i].MacAddr[0], pAd->StaCfg.DLSEntry[i].MacAddr[1], pAd->StaCfg.DLSEntry[i].MacAddr[2],
-				pAd->StaCfg.DLSEntry[i].MacAddr[3], pAd->StaCfg.DLSEntry[i].MacAddr[4], pAd->StaCfg.DLSEntry[i].MacAddr[5]);
-			printk("%-8d\n", pAd->StaCfg.DLSEntry[i].TimeOut);
-
-			printk("\n");
-			printk("\n%-19s%-4s%-4s%-4s%-4s%-8s%-7s%-7s%-7s%-10s%-6s%-6s%-6s%-6s\n",
-				   "MAC", "AID", "BSS", "PSM", "WMM", "MIMOPS", "RSSI0", "RSSI1", "RSSI2", "PhMd", "BW", "MCS", "SGI", "STBC");
-			printk("%02X:%02X:%02X:%02X:%02X:%02X  ",
-				pEntry->Addr[0], pEntry->Addr[1], pEntry->Addr[2],
-				pEntry->Addr[3], pEntry->Addr[4], pEntry->Addr[5]);
-			printk("%-4d", (int)pEntry->Aid);
-			printk("%-4d", (int)pEntry->apidx);
-			printk("%-4d", (int)pEntry->PsMode);
-			printk("%-4d", (int)CLIENT_STATUS_TEST_FLAG(pEntry, fCLIENT_STATUS_WMM_CAPABLE));
-			printk("%-8d", (int)pEntry->MmpsMode);
-			printk("%-7d", pEntry->RssiSample.AvgRssi0);
-			printk("%-7d", pEntry->RssiSample.AvgRssi1);
-			printk("%-7d", pEntry->RssiSample.AvgRssi2);
-			printk("%-10s", GetPhyMode(pEntry->HTPhyMode.field.MODE));
-			printk("%-6s", GetBW(pEntry->HTPhyMode.field.BW));
-			printk("%-6d", pEntry->HTPhyMode.field.MCS);
-			printk("%-6d", pEntry->HTPhyMode.field.ShortGI);
-			printk("%-6d", pEntry->HTPhyMode.field.STBC);
-			printk("%-10d, %d, %d%%\n", pEntry->DebugFIFOCount, pEntry->DebugTxCount,
-						(pEntry->DebugTxCount) ? ((pEntry->DebugTxCount-pEntry->DebugFIFOCount)*100/pEntry->DebugTxCount) : 0);
-			printk("\n");
-
-		}
-	}
-
-	return TRUE;
-}
-
-INT	Set_DlsAddEntry_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-    UCHAR	mac[MAC_ADDR_LEN];
-	USHORT	Timeout;
-	char *token, sepValue[] = ":", DASH = '-';
-	INT i;
-    RT_802_11_DLS	Dls;
-
-    if(strlen(arg) < 19)  //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and timeout value in decimal format.
-		return FALSE;
-
-	token = strchr(arg, DASH);
-	if ((token != NULL) && (strlen(token)>1))
-	{
-		Timeout = simple_strtol((token+1), 0, 10);
-
-		*token = '\0';
-		for (i = 0, token = rstrtok(arg, &sepValue[0]); token; token = rstrtok(NULL, &sepValue[0]), i++)
-		{
-			if((strlen(token) != 2) || (!isxdigit(*token)) || (!isxdigit(*(token+1))))
-				return FALSE;
-			AtoH(token, (PUCHAR)(&mac[i]), 1);
-		}
-		if(i != 6)
-			return FALSE;
-
-	    printk("\n%02x:%02x:%02x:%02x:%02x:%02x-%d", mac[0], mac[1],
-	           mac[2], mac[3], mac[4], mac[5], (int)Timeout);
-
-		NdisZeroMemory(&Dls, sizeof(RT_802_11_DLS));
-		Dls.TimeOut = Timeout;
-		COPY_MAC_ADDR(Dls.MacAddr, mac);
-		Dls.Valid = 1;
-
-		MlmeEnqueue(pAd,
-					MLME_CNTL_STATE_MACHINE,
-					RT_OID_802_11_SET_DLS_PARAM,
-					sizeof(RT_802_11_DLS),
-					&Dls);
-
-		return TRUE;
-	}
-
-	return FALSE;
-
-}
-
-INT	Set_DlsTearDownEntry_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UCHAR			macAddr[MAC_ADDR_LEN];
-	CHAR			*value;
-	INT				i;
-	RT_802_11_DLS	Dls;
-
-	if(strlen(arg) != 17)  //Mac address acceptable format 01:02:03:04:05:06 length 17
-		return FALSE;
-
-	for (i=0, value = rstrtok(arg,":"); value; value = rstrtok(NULL,":"))
-	{
-		if((strlen(value) != 2) || (!isxdigit(*value)) || (!isxdigit(*(value+1))) )
-			return FALSE;  //Invalid
-
-		AtoH(value, &macAddr[i++], 2);
-	}
-
-	printk("\n%02x:%02x:%02x:%02x:%02x:%02x", macAddr[0], macAddr[1],
-	           macAddr[2], macAddr[3], macAddr[4], macAddr[5]);
-
-	NdisZeroMemory(&Dls, sizeof(RT_802_11_DLS));
-	COPY_MAC_ADDR(Dls.MacAddr, macAddr);
-	Dls.Valid = 0;
-
-	MlmeEnqueue(pAd,
-				MLME_CNTL_STATE_MACHINE,
-				RT_OID_802_11_SET_DLS_PARAM,
-				sizeof(RT_802_11_DLS),
-				&Dls);
-
-	return TRUE;
-}
-
diff --git a/drivers/staging/rt2860/sta/rtmp_data.c b/drivers/staging/rt2860/sta/rtmp_data.c
index c5e76a2da56..b41ce230c50 100644
--- a/drivers/staging/rt2860/sta/rtmp_data.c
+++ b/drivers/staging/rt2860/sta/rtmp_data.c
@@ -50,7 +50,6 @@ VOID STARxEAPOLFrameIndicate(
 	PRXWI_STRUC		pRxWI = pRxBlk->pRxWI;
 	UCHAR			*pTmpBuf;
 
-#ifdef WPA_SUPPLICANT_SUPPORT
 	if (pAd->StaCfg.WpaSupplicantUP)
 	{
 		// All EAPoL frames have to pass to upper layer (ex. WPA_SUPPLICANT daemon)
@@ -75,6 +74,7 @@ VOID STARxEAPOLFrameIndicate(
 
                     if (pAd->StaCfg.DesireSharedKey[idx].KeyLen > 0)
     				{
+#ifdef RT2860
 						MAC_TABLE_ENTRY *pEntry = &pAd->MacTab.Content[BSSID_WCID];
 
 						// Set key material and cipherAlg to Asic
@@ -88,6 +88,32 @@ VOID STARxEAPOLFrameIndicate(
 
                         pAd->IndicateMediaState = NdisMediaStateConnected;
                         pAd->ExtraInfo = GENERAL_LINK_UP;
+#endif
+#ifdef RT2870
+						union
+						{
+							char buf[sizeof(NDIS_802_11_WEP)+MAX_LEN_OF_KEY- 1];
+							NDIS_802_11_WEP keyinfo;
+						}  WepKey;
+						int len;
+
+
+						NdisZeroMemory(&WepKey, sizeof(WepKey));
+						len =pAd->StaCfg.DesireSharedKey[idx].KeyLen;
+
+						NdisMoveMemory(WepKey.keyinfo.KeyMaterial,
+							pAd->StaCfg.DesireSharedKey[idx].Key,
+							pAd->StaCfg.DesireSharedKey[idx].KeyLen);
+
+						WepKey.keyinfo.KeyIndex = 0x80000000 + idx;
+						WepKey.keyinfo.KeyLength = len;
+						pAd->SharedKey[BSS0][idx].KeyLen =(UCHAR) (len <= 5 ? 5 : 13);
+
+						pAd->IndicateMediaState = NdisMediaStateConnected;
+						pAd->ExtraInfo = GENERAL_LINK_UP;
+						// need to enqueue cmd to thread
+						RTUSBEnqueueCmdFromNdis(pAd, OID_802_11_ADD_WEP, TRUE, &WepKey, sizeof(WepKey.keyinfo) + len - 1);
+#endif // RT2870 //
 						// For Preventing ShardKey Table is cleared by remove key procedure.
     					pAd->SharedKey[BSS0][idx].CipherAlg = CipherAlg;
 						pAd->SharedKey[BSS0][idx].KeyLen = pAd->StaCfg.DesireSharedKey[idx].KeyLen;
@@ -103,7 +129,6 @@ VOID STARxEAPOLFrameIndicate(
 		}
 	}
 	else
-#endif // WPA_SUPPLICANT_SUPPORT //
 	{
 		// Special DATA frame that has to pass to MLME
 		//	 1. Cisco Aironet frames for CCX2. We need pass it to MLME for special process
@@ -168,20 +193,16 @@ VOID STARxDataFrameAnnounce(
 			// ARALINK
 			CmmRxRalinkFrameIndicate(pAd, pEntry, pRxBlk, FromWhichBSSID);
 		}
-#ifdef QOS_DLS_SUPPORT
-		RX_BLK_CLEAR_FLAG(pRxBlk, fRX_DLS);
-#endif // QOS_DLS_SUPPORT //
 	}
 	else
 	{
 		RX_BLK_SET_FLAG(pRxBlk, fRX_EAP);
-#ifdef DOT11_N_SUPPORT
+
 		if (RX_BLK_TEST_FLAG(pRxBlk, fRX_AMPDU) && (pAd->CommonCfg.bDisableReordering == 0))
 		{
 			Indicate_AMPDU_Packet(pAd, pRxBlk, FromWhichBSSID);
 		}
 		else
-#endif // DOT11_N_SUPPORT //
 		{
 			// Determin the destination of the EAP frame
 			//  to WPA state machine or upper layer
@@ -226,13 +247,11 @@ BOOLEAN STACheckTkipMICValue(
 	{
 		DBGPRINT_RAW(RT_DEBUG_ERROR,("Rx MIC Value error 2\n"));
 
-#ifdef WPA_SUPPLICANT_SUPPORT
 		if (pAd->StaCfg.WpaSupplicantUP)
 		{
 			WpaSendMicFailureToWpaSupplicant(pAd, (pWpaKey->Type == PAIRWISEKEY) ? TRUE : FALSE);
 		}
 		else
-#endif // WPA_SUPPLICANT_SUPPORT //
 		{
 			RTMPReportMicError(pAd, pWpaKey);
 		}
@@ -276,14 +295,6 @@ VOID STAHandleRxDataFrame(
 			return;
 		}
 
-#ifdef QOS_DLS_SUPPORT
-		//if ((pHeader->FC.FrDs == 0) && (pHeader->FC.ToDs == 0))
-		if (RTMPRcvFrameDLSCheck(pAd, pHeader, pRxWI->MPDUtotalByteCount, pRxD))
-		{
-			return;
-		}
-#endif // QOS_DLS_SUPPORT //
-
 		// Drop not my BSS frames
 		if (pRxD->MyBss == 0)
 		{
@@ -342,10 +353,7 @@ VOID STAHandleRxDataFrame(
 		}
 
 	    // Drop not my BSS frame (we can not only check the MyBss bit in RxD)
-#ifdef QOS_DLS_SUPPORT
-	    if (!pAd->CommonCfg.bDLSCapable)
-	    {
-#endif // QOS_DLS_SUPPORT //
+
 		if (INFRA_ON(pAd))
 		{
 			// Infrastructure mode, check address 2 for BSSID
@@ -368,9 +376,6 @@ VOID STAHandleRxDataFrame(
 				return;
 			}
 		}
-#ifdef QOS_DLS_SUPPORT
-	    }
-#endif // QOS_DLS_SUPPORT //
 
 		//
 		// find pEntry
@@ -391,11 +396,6 @@ VOID STAHandleRxDataFrame(
 		if (INFRA_ON(pAd))
 		{
 			RX_BLK_SET_FLAG(pRxBlk, fRX_INFRA);
-#ifdef QOS_DLS_SUPPORT
-			if ((pHeader->FC.FrDs == 0) && (pHeader->FC.ToDs == 0))
-				RX_BLK_SET_FLAG(pRxBlk, fRX_DLS);
-			else
-#endif // QOS_DLS_SUPPORT //
 			ASSERT(pRxWI->WirelessCliID == BSSID_WCID);
 		}
 
@@ -453,12 +453,10 @@ VOID STAHandleRxDataFrame(
 		else
 #endif
 		{
-#ifdef DOT11_N_SUPPORT
 			RX_BLK_SET_FLAG(pRxBlk, fRX_HTC);
 			// skip HTC contorl field
 			pRxBlk->pData += 4;
 			pRxBlk->DataSize -= 4;
-#endif // DOT11_N_SUPPORT //
 		}
 	}
 
@@ -471,13 +469,10 @@ VOID STAHandleRxDataFrame(
 		pRxBlk->pData += 2;
 	}
 
-#ifdef DOT11_N_SUPPORT
 	if (pRxD->BA)
 	{
 		RX_BLK_SET_FLAG(pRxBlk, fRX_AMPDU);
 	}
-#endif // DOT11_N_SUPPORT //
-
 
 	//
 	// Case I  Process Broadcast & Multicast data frame
@@ -509,18 +504,6 @@ VOID STAHandleRxDataFrame(
 	{
 		pAd->LastRxRate = (USHORT)((pRxWI->MCS) + (pRxWI->BW <<7) + (pRxWI->ShortGI <<8)+ (pRxWI->PHYMODE <<14)) ;
 
-
-#ifdef QOS_DLS_SUPPORT
-        if (RX_BLK_TEST_FLAG(pRxBlk, fRX_DLS))
-		{
-			MAC_TABLE_ENTRY *pDlsEntry = NULL;
-
-			pDlsEntry = DlsEntryTableLookupByWcid(pAd, pRxWI->WirelessCliID, pHeader->Addr2, TRUE);
-										                        if(pDlsEntry)
-			Update_Rssi_Sample(pAd, &pDlsEntry->RssiSample, pRxWI);
-		}
-		else
-#endif // QOS_DLS_SUPPORT //
 		if (ADHOC_ON(pAd))
 		{
 			pEntry = MacTableLookup(pAd, pHeader->Addr2);
@@ -592,7 +575,13 @@ VOID STAHandleRxMgmtFrame(
 	{
 
 		// We should collect RSSI not only U2M data but also my beacon
+#ifdef RT30xx
+		if ((pHeader->FC.SubType == SUBTYPE_BEACON) && (MAC_ADDR_EQUAL(&pAd->CommonCfg.Bssid, &pHeader->Addr2))
+			&& (pAd->RxAnt.EvaluatePeriod == 0))
+#endif
+#ifndef RT30xx
 		if ((pHeader->FC.SubType == SUBTYPE_BEACON) && (MAC_ADDR_EQUAL(&pAd->CommonCfg.Bssid, &pHeader->Addr2)))
+#endif
 		{
 			Update_Rssi_Sample(pAd, &pAd->StaCfg.RssiSample, pRxWI);
 
@@ -600,6 +589,18 @@ VOID STAHandleRxMgmtFrame(
 			pAd->StaCfg.LastSNR1 = (UCHAR)(pRxWI->SNR1);
 		}
 
+#ifdef RT30xx
+		// collect rssi information for antenna diversity
+		if (pAd->NicConfig2.field.AntDiversity)
+		{
+			if ((pRxD->U2M) || ((pHeader->FC.SubType == SUBTYPE_BEACON) && (MAC_ADDR_EQUAL(&pAd->CommonCfg.Bssid, &pHeader->Addr2))))
+			{
+					COLLECT_RX_ANTENNA_AVERAGE_RSSI(pAd, ConvertToRssi(pAd, (UCHAR)pRxWI->RSSI0, RSSI_0), 0); //Note: RSSI2 not used on RT73
+					pAd->StaCfg.NumOfAvgRssiSample ++;
+			}
+		}
+#endif // RT30xx //
+
 		// First check the size, it MUST not exceed the mlme queue size
 		if (pRxWI->MPDUtotalByteCount > MGMT_DMA_BUFFER_SIZE)
 		{
@@ -618,21 +619,17 @@ VOID STAHandleRxControlFrame(
 	IN	PRTMP_ADAPTER	pAd,
 	IN	RX_BLK			*pRxBlk)
 {
-#ifdef DOT11_N_SUPPORT
 	PRXWI_STRUC		pRxWI = pRxBlk->pRxWI;
-#endif // DOT11_N_SUPPORT //
 	PHEADER_802_11	pHeader = pRxBlk->pHeader;
 	PNDIS_PACKET	pRxPacket = pRxBlk->pRxPacket;
 
 	switch (pHeader->FC.SubType)
 	{
 		case SUBTYPE_BLOCK_ACK_REQ:
-#ifdef DOT11_N_SUPPORT
 			{
 				CntlEnqueueForRecv(pAd, pRxWI->WirelessCliID, (pRxWI->MPDUtotalByteCount), (PFRAME_BA_REQ)pHeader);
 			}
 			break;
-#endif // DOT11_N_SUPPORT //
 		case SUBTYPE_BLOCK_ACK:
 		case SUBTYPE_ACK:
 		default:
@@ -691,12 +688,14 @@ BOOLEAN STARxDoneInterruptHandle(
 			break;
 		}
 
+#ifdef RT2860
 		if (RxProcessed++ > MAX_RX_PROCESS_CNT)
 		{
 			// need to reschedule rx handle
 			bReschedule = TRUE;
 			break;
 		}
+#endif
 
 		RxProcessed ++; // test
 
@@ -721,11 +720,6 @@ BOOLEAN STARxDoneInterruptHandle(
 		pRxWI	= (PRXWI_STRUC) pData;
 		pHeader = (PHEADER_802_11) (pData+RXWI_SIZE) ;
 
-#ifdef RT_BIG_ENDIAN
-	    RTMPFrameEndianChange(pAd, (PUCHAR)pHeader, DIR_READ, TRUE);
-		RTMPWIEndianChange((PUCHAR)pRxWI, TYPE_RXWI);
-#endif
-
 		// build RxCell
 		RxCell.pRxWI = pRxWI;
 		RxCell.pHeader = pHeader;
@@ -749,22 +743,6 @@ BOOLEAN STARxDoneInterruptHandle(
 			break;
 		}
 		/* RT2870 invokes STARxDoneInterruptHandle() in rtusb_bulk.c */
-#ifdef RALINK_ATE
-		if (ATE_ON(pAd))
-		{
-			pAd->ate.RxCntPerSec++;
-			ATESampleRssi(pAd, pRxWI);
-#ifdef RALINK_28xx_QA
-			if (pAd->ate.bQARxStart == TRUE)
-			{
-				/* (*pRxD) has been swapped in GetPacketFromRxRing() */
-				ATE_QA_Statistics(pAd, pRxWI, pRxD,	pHeader);
-			}
-#endif // RALINK_28xx_QA //
-			RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_SUCCESS);
-			continue;
-		}
-#endif // RALINK_ATE //
 
 		// Check for all RxD errors
 		Status = RTMPCheckRxError(pAd, pHeader, pRxWI, pRxD);
@@ -807,6 +785,7 @@ BOOLEAN STARxDoneInterruptHandle(
 		}
 	}
 
+#ifdef RT2860
 	// fRTMP_PS_GO_TO_SLEEP_NOW is set if receiving beacon.
 	if (RTMP_TEST_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW) && (INFRA_ON(pAd)))
 	{
@@ -814,6 +793,7 @@ BOOLEAN STARxDoneInterruptHandle(
 		AsicSleepThenAutoWakeup(pAd, pAd->ThisTbttNumToNextWakeUp);
 		bReschedule = FALSE;
 	}
+#endif
 	return bReschedule;
 }
 
@@ -831,7 +811,12 @@ BOOLEAN STARxDoneInterruptHandle(
 VOID	RTMPHandleTwakeupInterrupt(
 	IN PRTMP_ADAPTER pAd)
 {
+#ifdef RT2860
 	AsicForceWakeup(pAd, DOT11POWERSAVE);
+#endif
+#ifdef RT2870
+	AsicForceWakeup(pAd, FALSE);
+#endif
 }
 
 /*
@@ -885,17 +870,6 @@ VOID STASendPackets(
 			{
 				// Record that orignal packet source is from NDIS layer,so that
 				// later on driver knows how to release this NDIS PACKET
-#ifdef QOS_DLS_SUPPORT
-				MAC_TABLE_ENTRY *pEntry;
-				PUCHAR pSrcBufVA = GET_OS_PKT_DATAPTR(pPacket);
-
-				pEntry = MacTableLookup(pAd, pSrcBufVA);
-				if (pEntry && (pEntry->ValidAsDls == TRUE))
-				{
-					RTMP_SET_PACKET_WCID(pPacket, pEntry->Aid);
-				}
-				else
-#endif // QOS_DLS_SUPPORT //
 				RTMP_SET_PACKET_WCID(pPacket, 0); // this field is useless when in STA mode
 				RTMP_SET_PACKET_SOURCE(pPacket, PKTSRC_NDIS);
 				NDIS_SET_PACKET_STATUS(pPacket, NDIS_STATUS_PENDING);
@@ -977,18 +951,6 @@ NDIS_STATUS STASendPacket(
 	{
 		if(INFRA_ON(pAd))
 		{
-#ifdef QOS_DLS_SUPPORT
-			USHORT	tmpWcid;
-
-			tmpWcid = RTMP_GET_PACKET_WCID(pPacket);
-			if (VALID_WCID(tmpWcid) &&
-				(pAd->MacTab.Content[tmpWcid].ValidAsDls== TRUE))
-			{
-				pEntry = &pAd->MacTab.Content[tmpWcid];
-				Rate = pAd->MacTab.Content[tmpWcid].CurrTxRate;
-			}
-			else
-#endif // QOS_DLS_SUPPORT //
 			{
 			pEntry = &pAd->MacTab.Content[BSSID_WCID];
 			RTMP_SET_PACKET_WCID(pPacket, BSSID_WCID);
@@ -1039,12 +1001,7 @@ NDIS_STATUS STASendPacket(
 		 (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
 		 (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) ||
 		 (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)
-#ifdef WPA_SUPPLICANT_SUPPORT
 		  || (pAd->StaCfg.IEEE8021X == TRUE)
-#endif // WPA_SUPPLICANT_SUPPORT //
-#ifdef LEAP_SUPPORT
-		  || (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-#endif // LEAP_SUPPORT //
 		  )
 		  && ((pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED) || (pAd->StaCfg.MicErrCnt >= 2))
 		  && (RTMP_GET_PACKET_EAPOL(pPacket)== FALSE)
@@ -1070,10 +1027,8 @@ NDIS_STATUS STASendPacket(
 		NumberOfFrag = 1;	// Aggregation overwhelms fragmentation
 	else if (CLIENT_STATUS_TEST_FLAG(pEntry, fCLIENT_STATUS_AMSDU_INUSED))
 		NumberOfFrag = 1;	// Aggregation overwhelms fragmentation
-#ifdef DOT11_N_SUPPORT
 	else if ((pAd->StaCfg.HTPhyMode.field.MODE == MODE_HTMIX) || (pAd->StaCfg.HTPhyMode.field.MODE == MODE_HTGREENFIELD))
 		NumberOfFrag = 1;	// MIMO RATE overwhelms fragmentation
-#endif // DOT11_N_SUPPORT //
 	else
 	{
 		// The calculated "NumberOfFrag" is a rough estimation because of various
@@ -1110,7 +1065,13 @@ NDIS_STATUS STASendPacket(
 	//
 	UserPriority = 0;
 	QueIdx		 = QID_AC_BE;
+#ifdef RT2860
 	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED))
+#endif
+#ifdef RT2870
+	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) &&
+		CLIENT_STATUS_TEST_FLAG(pEntry, fCLIENT_STATUS_WMM_CAPABLE))
+#endif
 	{
 		USHORT Protocol;
 		UCHAR  LlcSnapLen = 0, Byte0, Byte1;
@@ -1163,9 +1124,6 @@ NDIS_STATUS STASendPacket(
 	if (pAd->TxSwQueue[QueIdx].Number >= MAX_PACKETS_IN_QUEUE)
 	{
 		RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags);
-#ifdef BLOCK_NET_IF
-		StopNetIfQueue(pAd, QueIdx, pPacket);
-#endif // BLOCK_NET_IF //
 		RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
 
 		return NDIS_STATUS_FAILURE;
@@ -1176,9 +1134,13 @@ NDIS_STATUS STASendPacket(
 	}
 	RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags);
 
-#ifdef DOT11_N_SUPPORT
     if ((pAd->CommonCfg.BACapability.field.AutoBA == TRUE)&&
+#ifdef RT2860
         (pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE))
+#endif
+#ifdef RT2870
+        IS_HT_STA(pEntry))
+#endif
 	{
 		if (((pEntry->TXBAbitmap & (1<<UserPriority)) == 0) &&
             ((pEntry->BADeclineBitmap & (1<<UserPriority)) == 0) &&
@@ -1194,7 +1156,6 @@ NDIS_STATUS STASendPacket(
 			BAOriSessionSetUp(pAd, pEntry, 0, 0, 10, FALSE);
 		}
 	}
-#endif // DOT11_N_SUPPORT //
 
 	pAd->RalinkCounters.OneSecOsTxCount[QueIdx]++; // TODO: for debug only. to be removed
 	return NDIS_STATUS_SUCCESS;
@@ -1223,14 +1184,27 @@ NDIS_STATUS STASendPacket(
 
 	========================================================================
 */
+
+#ifdef RT2870
+/*
+	Actually, this function used to check if the TxHardware Queue still has frame need to send.
+	If no frame need to send, go to sleep, else, still wake up.
+*/
+#endif
 NDIS_STATUS RTMPFreeTXDRequest(
 	IN		PRTMP_ADAPTER	pAd,
 	IN		UCHAR			QueIdx,
 	IN		UCHAR			NumberRequired,
 	IN		PUCHAR			FreeNumberIs)
 {
+#ifdef RT2860
 	ULONG		FreeNumber = 0;
+#endif
 	NDIS_STATUS 	Status = NDIS_STATUS_FAILURE;
+#ifdef RT2870
+	unsigned long   IrqFlags;
+	HT_TX_CONTEXT	*pHTTXContext;
+#endif
 
 	switch (QueIdx)
 	{
@@ -1239,6 +1213,7 @@ NDIS_STATUS RTMPFreeTXDRequest(
 		case QID_AC_VI:
 		case QID_AC_VO:
 		case QID_HCCA:
+#ifdef RT2860
 			if (pAd->TxRing[QueIdx].TxSwFreeIdx > pAd->TxRing[QueIdx].TxCpuIdx)
 				FreeNumber = pAd->TxRing[QueIdx].TxSwFreeIdx - pAd->TxRing[QueIdx].TxCpuIdx - 1;
 			else
@@ -1246,9 +1221,27 @@ NDIS_STATUS RTMPFreeTXDRequest(
 
 			if (FreeNumber >= NumberRequired)
 				Status = NDIS_STATUS_SUCCESS;
+#endif
+#ifdef RT2870
+			{
+				pHTTXContext = &pAd->TxContext[QueIdx];
+				RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
+				if ((pHTTXContext->CurWritePosition != pHTTXContext->ENextBulkOutPosition) ||
+					(pHTTXContext->IRPPending == TRUE))
+				{
+					Status = NDIS_STATUS_FAILURE;
+				}
+				else
+				{
+					Status = NDIS_STATUS_SUCCESS;
+				}
+				RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
+			}
+#endif
 			break;
 
 		case QID_MGMT:
+#ifdef RT2860
 			if (pAd->MgmtRing.TxSwFreeIdx > pAd->MgmtRing.TxCpuIdx)
 				FreeNumber = pAd->MgmtRing.TxSwFreeIdx - pAd->MgmtRing.TxCpuIdx - 1;
 			else
@@ -1256,13 +1249,22 @@ NDIS_STATUS RTMPFreeTXDRequest(
 
 			if (FreeNumber >= NumberRequired)
 				Status = NDIS_STATUS_SUCCESS;
+#endif
+#ifdef RT2870
+			if (pAd->MgmtRing.TxSwFreeIdx != MGMT_RING_SIZE)
+				Status = NDIS_STATUS_FAILURE;
+			else
+				Status = NDIS_STATUS_SUCCESS;
+#endif
 			break;
 
 		default:
 			DBGPRINT(RT_DEBUG_ERROR,("RTMPFreeTXDRequest::Invalid QueIdx(=%d)\n", QueIdx));
 			break;
 	}
+#ifdef RT2860
 	*FreeNumberIs = (UCHAR)FreeNumber;
+#endif
 
 	return (Status);
 }
@@ -1283,22 +1285,12 @@ VOID	RTMPSendNullFrame(
 	ULONG	Length;
 	PHEADER_802_11	pHeader_802_11;
 
-
-#ifdef RALINK_ATE
-	if(ATE_ON(pAd))
-	{
-		return;
-	}
-#endif // RALINK_ATE //
-
     // WPA 802.1x secured port control
     if (((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) ||
          (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
          (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) ||
          (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)
-#ifdef WPA_SUPPLICANT_SUPPORT
 			  || (pAd->StaCfg.IEEE8021X == TRUE)
-#endif
         ) &&
        (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
 	{
@@ -1402,30 +1394,6 @@ VOID STAFindCipherAlgorithm(
 		}
 		else if (Cipher == Ndis802_11Encryption1Enabled)
 		{
-#ifdef LEAP_SUPPORT
-			if (pAd->StaCfg.CkipFlag & 0x10) // Cisco CKIP KP is on
-			{
-				if (LEAP_CCKM_ON(pAd))
-				{
-					if (((*pSrcBufVA & 0x01) && (ADHOC_ON(pAd))))
-						KeyIdx = 1;
-					else
-						KeyIdx = 0;
-				}
-				else
-					KeyIdx = pAd->StaCfg.DefaultKeyId;
-			}
-			else if (pAd->StaCfg.CkipFlag & 0x08) // only CKIP CMIC
-				KeyIdx = pAd->StaCfg.DefaultKeyId;
-			else if (LEAP_CCKM_ON(pAd))
-			{
-				if ((*pSrcBufVA & 0x01) && (ADHOC_ON(pAd)))
-					KeyIdx = 1;
-				else
-					KeyIdx = 0;
-			}
-			else	// standard WEP64 or WEP128
-#endif // LEAP_SUPPORT //
 				KeyIdx = pAd->StaCfg.DefaultKeyId;
 		}
 		else if ((Cipher == Ndis802_11Encryption2Enabled) ||
@@ -1443,13 +1411,11 @@ VOID STAFindCipherAlgorithm(
 			CipherAlg = CIPHER_NONE;
 		else if ((Cipher == Ndis802_11EncryptionDisabled) || (pAd->SharedKey[BSS0][KeyIdx].KeyLen == 0))
 			CipherAlg = CIPHER_NONE;
-#ifdef WPA_SUPPLICANT_SUPPORT
 	    else if ( pAd->StaCfg.WpaSupplicantUP &&
 	             (Cipher == Ndis802_11Encryption1Enabled) &&
 	             (pAd->StaCfg.IEEE8021X == TRUE) &&
 	             (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
 	        CipherAlg = CIPHER_NONE;
-#endif // WPA_SUPPLICANT_SUPPORT //
 		else
 		{
 			//Header_802_11.FC.Wep = 1;
@@ -1467,12 +1433,7 @@ VOID STABuildCommon802_11Header(
 	IN  PRTMP_ADAPTER   pAd,
 	IN  TX_BLK          *pTxBlk)
 {
-
 	HEADER_802_11	*pHeader_802_11;
-#ifdef QOS_DLS_SUPPORT
-	BOOLEAN	bDLSFrame = FALSE;
-	INT	DlsEntryIndex = 0;
-#endif // QOS_DLS_SUPPORT //
 
 	//
 	// MAKE A COMMON 802.11 HEADER
@@ -1489,19 +1450,6 @@ VOID STABuildCommon802_11Header(
 	pHeader_802_11->FC.Type = BTYPE_DATA;
 	pHeader_802_11->FC.SubType = ((TX_BLK_TEST_FLAG(pTxBlk, fTX_bWMM)) ? SUBTYPE_QDATA : SUBTYPE_DATA);
 
-#ifdef QOS_DLS_SUPPORT
-	if (INFRA_ON(pAd))
-	{
-		// Check if the frame can be sent through DLS direct link interface
-		// If packet can be sent through DLS, then force aggregation disable. (Hard to determine peer STA's capability)
-		DlsEntryIndex = RTMPCheckDLSFrame(pAd, pTxBlk->pSrcBufHeader);
-		if (DlsEntryIndex >= 0)
-			bDLSFrame = TRUE;
-		else
-			bDLSFrame = FALSE;
-	}
-#endif // QOS_DLS_SUPPORT //
-
     if (pTxBlk->pMacEntry)
 	{
 		if (TX_BLK_TEST_FLAG(pTxBlk, fTX_bForceNonQoS))
@@ -1511,14 +1459,6 @@ VOID STABuildCommon802_11Header(
 		}
 		else
 		{
-#ifdef QOS_DLS_SUPPORT
-			if (bDLSFrame)
-			{
-				pHeader_802_11->Sequence = pAd->StaCfg.DLSEntry[DlsEntryIndex].Sequence;
-				pAd->StaCfg.DLSEntry[DlsEntryIndex].Sequence = (pAd->StaCfg.DLSEntry[DlsEntryIndex].Sequence+1) & MAXSEQ;
-			}
-			else
-#endif // QOS_DLS_SUPPORT //
 			{
     	    pHeader_802_11->Sequence = pTxBlk->pMacEntry->TxSeq[pTxBlk->UserPriority];
     	    pTxBlk->pMacEntry->TxSeq[pTxBlk->UserPriority] = (pTxBlk->pMacEntry->TxSeq[pTxBlk->UserPriority]+1) & MAXSEQ;
@@ -1538,16 +1478,6 @@ VOID STABuildCommon802_11Header(
 	{
 		if (INFRA_ON(pAd))
 		{
-#ifdef QOS_DLS_SUPPORT
-			if (bDLSFrame)
-			{
-				COPY_MAC_ADDR(pHeader_802_11->Addr1, pTxBlk->pSrcBufHeader);
-				COPY_MAC_ADDR(pHeader_802_11->Addr2, pAd->CurrentAddress);
-				COPY_MAC_ADDR(pHeader_802_11->Addr3, pAd->CommonCfg.Bssid);
-				pHeader_802_11->FC.ToDs = 0;
-			}
-			else
-#endif // QOS_DLS_SUPPORT //
 			{
 			COPY_MAC_ADDR(pHeader_802_11->Addr1, pAd->CommonCfg.Bssid);
 			COPY_MAC_ADDR(pHeader_802_11->Addr2, pAd->CurrentAddress);
@@ -1576,7 +1506,6 @@ VOID STABuildCommon802_11Header(
     	pHeader_802_11->FC.PwrMgmt = (pAd->StaCfg.Psm == PWR_SAVE);
 }
 
-#ifdef DOT11_N_SUPPORT
 VOID STABuildCache802_11Header(
 	IN RTMP_ADAPTER		*pAd,
 	IN TX_BLK			*pTxBlk,
@@ -1603,29 +1532,7 @@ VOID STABuildCache802_11Header(
     pMacEntry->TxSeq[pTxBlk->UserPriority] = (pMacEntry->TxSeq[pTxBlk->UserPriority]+1) & MAXSEQ;
 
 	{
-		// Check if the frame can be sent through DLS direct link interface
-		// If packet can be sent through DLS, then force aggregation disable. (Hard to determine peer STA's capability)
-#ifdef QOS_DLS_SUPPORT
-		BOOLEAN	bDLSFrame = FALSE;
-		INT	DlsEntryIndex = 0;
-
-		DlsEntryIndex = RTMPCheckDLSFrame(pAd, pTxBlk->pSrcBufHeader);
-		if (DlsEntryIndex >= 0)
-			bDLSFrame = TRUE;
-		else
-			bDLSFrame = FALSE;
-#endif // QOS_DLS_SUPPORT //
-
 		// The addr3 of normal packet send from DS is Dest Mac address.
-#ifdef QOS_DLS_SUPPORT
-		if (bDLSFrame)
-		{
-			COPY_MAC_ADDR(pHeader80211->Addr1, pTxBlk->pSrcBufHeader);
-			COPY_MAC_ADDR(pHeader80211->Addr3, pAd->CommonCfg.Bssid);
-			pHeader80211->FC.ToDs = 0;
-		}
-		else
-#endif // QOS_DLS_SUPPORT //
 		if (ADHOC_ON(pAd))
 			COPY_MAC_ADDR(pHeader80211->Addr3, pAd->CommonCfg.Bssid);
 		else
@@ -1640,7 +1547,6 @@ VOID STABuildCache802_11Header(
 	else
     	pHeader80211->FC.PwrMgmt = (pAd->StaCfg.Psm == PWR_SAVE);
 }
-#endif // DOT11_N_SUPPORT //
 
 static inline PUCHAR STA_Build_ARalink_Frame_Header(
 	IN RTMP_ADAPTER *pAd,
@@ -1700,7 +1606,6 @@ static inline PUCHAR STA_Build_ARalink_Frame_Header(
 
 }
 
-#ifdef DOT11_N_SUPPORT
 static inline PUCHAR STA_Build_AMSDU_Frame_Header(
 	IN RTMP_ADAPTER *pAd,
 	IN TX_BLK		*pTxBlk)
@@ -1890,7 +1795,9 @@ VOID STA_AMPDU_Frame_Tx(
 		//
 		// Kick out Tx
 		//
+#ifdef RT2860
 		if (!RTMP_TEST_PSFLAG(pAd, fRTMP_PS_DISABLE_TX))
+#endif
 			HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx);
 
 		pAd->RalinkCounters.KickTxCount++;
@@ -2021,10 +1928,11 @@ VOID STA_AMSDU_Frame_Tx(
 	//
 	// Kick out Tx
 	//
+#ifdef RT2860
 	if (!RTMP_TEST_PSFLAG(pAd, fRTMP_PS_DISABLE_TX))
+#endif
 		HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx);
 }
-#endif // DOT11_N_SUPPORT //
 
 VOID STA_Legacy_Frame_Tx(
 	IN	PRTMP_ADAPTER	pAd,
@@ -2142,7 +2050,9 @@ VOID STA_Legacy_Frame_Tx(
 	//
 	// Kick out Tx
 	//
+#ifdef RT2860
 	if (!RTMP_TEST_PSFLAG(pAd, fRTMP_PS_DISABLE_TX))
+#endif
 		HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx);
 }
 
@@ -2253,7 +2163,9 @@ VOID STA_ARalink_Frame_Tx(
 	//
 	// Kick out Tx
 	//
+#ifdef RT2860
 	if (!RTMP_TEST_PSFLAG(pAd, fRTMP_PS_DISABLE_TX))
+#endif
 		HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx);
 
 }
@@ -2513,15 +2425,6 @@ NDIS_STATUS STAHardTransmit(
 
 	pPacket = QUEUE_ENTRY_TO_PACKET(pTxBlk->TxPacketList.Head);
 
-#if 0 //def CARRIER_DETECTION_SUPPORT // Roger sync Carrier
-		if ((pAd->CommonCfg.CarrierDetect.Enable == TRUE) && (isCarrierDetectExist(pAd) == TRUE))
-	{
-		DBGPRINT(RT_DEBUG_INFO,("STAHardTransmit --> radar detect not in normal mode !!!\n"));
-		RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
-		return (NDIS_STATUS_FAILURE);
-	}
-#endif // CARRIER_DETECTION_SUPPORT //
-
 	// ------------------------------------------------------------------
 	// STEP 1. WAKE UP PHY
 	//		outgoing frame always wakeup PHY to prevent frame lost and
@@ -2531,7 +2434,12 @@ NDIS_STATUS STAHardTransmit(
 	if ((pAd->StaCfg.Psm == PWR_SAVE) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
 	{
 	    DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicForceWakeup At HardTx\n"));
+#ifdef RT2860
 		AsicForceWakeup(pAd, FROM_TX);
+#endif
+#ifdef RT2870
+		AsicForceWakeup(pAd, TRUE);
+#endif
 	}
 
 	// It should not change PSM bit, when APSD turn on.
@@ -2546,14 +2454,12 @@ NDIS_STATUS STAHardTransmit(
 
 	switch (pTxBlk->TxFrameType)
 	{
-#ifdef DOT11_N_SUPPORT
 		case TX_AMPDU_FRAME:
 				STA_AMPDU_Frame_Tx(pAd, pTxBlk);
 			break;
 		case TX_AMSDU_FRAME:
 				STA_AMSDU_Frame_Tx(pAd, pTxBlk);
 			break;
-#endif // DOT11_N_SUPPORT //
 		case TX_LEGACY_FRAME:
 				STA_Legacy_Frame_Tx(pAd, pTxBlk);
 			break;
diff --git a/drivers/staging/rt2860/sta/sanity.c b/drivers/staging/rt2860/sta/sanity.c
index 239872464be..7d530f60160 100644
--- a/drivers/staging/rt2860/sta/sanity.c
+++ b/drivers/staging/rt2860/sta/sanity.c
@@ -184,7 +184,6 @@ BOOLEAN PeerAssocRspSanity(
 			}
 
 		break;
-#ifdef DOT11_N_SUPPORT
             case IE_ADD_HT:
             case IE_ADD_HT2:
 			if (pEid->Len >= sizeof(ADD_HT_INFO_IE))
@@ -213,7 +212,6 @@ BOOLEAN PeerAssocRspSanity(
 			{
 				DBGPRINT(RT_DEBUG_WARN, ("PeerAssocRspSanity - wrong IE_SECONDARY_CH_OFFSET. \n"));
 			}
-#endif // DOT11_N_SUPPORT //
 		break;
             case IE_AIRONET_CKIP:
                 // 0. Check Aironet IE length, it must be larger or equal to 28
diff --git a/drivers/staging/rt2860/sta/sync.c b/drivers/staging/rt2860/sta/sync.c
index 148037a79d5..87b5e49cec5 100644
--- a/drivers/staging/rt2860/sta/sync.c
+++ b/drivers/staging/rt2860/sta/sync.c
@@ -37,6 +37,7 @@
 */
 #include "../rt_config.h"
 
+#ifdef RT2860
 #define AC0_DEF_TXOP		0
 #define AC1_DEF_TXOP		0
 #define AC2_DEF_TXOP		94
@@ -71,6 +72,10 @@ VOID	AdhocTurnOnQos(
 	}
 	AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm);
 }
+#endif /* RT2860 */
+#ifdef RT2870
+#define ADHOC_ENTRY_BEACON_LOST_TIME	(2*OS_HZ)	// 2 sec
+#endif
 
 /*
 	==========================================================================
@@ -141,7 +146,6 @@ VOID BeaconTimeout(
 	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS))
 		return;
 
-#ifdef DOT11_N_SUPPORT
 	if ((pAd->CommonCfg.BBPCurrentBW == BW_40)
 		)
 	{
@@ -154,7 +158,6 @@ VOID BeaconTimeout(
 		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
 		DBGPRINT(RT_DEBUG_TRACE, ("SYNC - End of SCAN, restore to 40MHz channel %d, Total BSS[%02d]\n",pAd->CommonCfg.CentralChannel, pAd->ScanTab.BssNr));
 	}
-#endif // DOT11_N_SUPPORT //
 
 	MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_BEACON_TIMEOUT, 0, NULL);
 	RT28XX_MLME_HANDLER(pAd);
@@ -228,6 +231,7 @@ VOID MlmeScanReqAction(
 	// Increase the scan retry counters.
 	pAd->StaCfg.ScanCnt++;
 
+#ifdef RT2860
     if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) &&
         (IDLE_ON(pAd)) &&
 		(pAd->StaCfg.bRadio == TRUE) &&
@@ -235,6 +239,7 @@ VOID MlmeScanReqAction(
 	{
 		RT28xxPciAsicRadioOn(pAd, GUI_IDLE_POWER_SAVE);
 	}
+#endif
 
 	// first check the parameter sanity
 	if (MlmeScanReqSanity(pAd,
@@ -347,6 +352,7 @@ VOID MlmeJoinReqAction(
 
 	DBGPRINT(RT_DEBUG_TRACE, ("SYNC - MlmeJoinReqAction(BSS #%ld)\n", pInfo->BssIdx));
 
+#ifdef RT2860
     if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) &&
         (IDLE_ON(pAd)) &&
 		(pAd->StaCfg.bRadio == TRUE) &&
@@ -354,6 +360,7 @@ VOID MlmeJoinReqAction(
 	{
 		RT28xxPciAsicRadioOn(pAd, GUI_IDLE_POWER_SAVE);
 	}
+#endif
 
 	// reset all the timers
 	RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &TimerCancelled);
@@ -375,22 +382,6 @@ VOID MlmeJoinReqAction(
 	pAd->MlmeAux.Channel = pBss->Channel;
 	pAd->MlmeAux.CentralChannel = pBss->CentralChannel;
 
-#ifdef EXT_BUILD_CHANNEL_LIST
-	// Country IE of the AP will be evaluated and will be used.
-	if ((pAd->StaCfg.IEEE80211dClientMode != Rt802_11_D_None) &&
-		(pBss->bHasCountryIE == TRUE))
-	{
-		NdisMoveMemory(&pAd->CommonCfg.CountryCode[0], &pBss->CountryString[0], 2);
-		if (pBss->CountryString[2] == 'I')
-			pAd->CommonCfg.Geography = IDOR;
-		else if (pBss->CountryString[2] == 'O')
-			pAd->CommonCfg.Geography = ODOR;
-		else
-			pAd->CommonCfg.Geography = BOTH;
-		BuildChannelListEx(pAd);
-	}
-#endif // EXT_BUILD_CHANNEL_LIST //
-
 	// Let BBP register at 20MHz to do scan
 	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
 	BBPValue &= (~0x18);
@@ -407,9 +398,6 @@ VOID MlmeJoinReqAction(
 		if (((pAd->CommonCfg.bIEEE80211H == 1) &&
             (pAd->MlmeAux.Channel > 14) &&
              RadarChannelCheck(pAd, pAd->MlmeAux.Channel))
-#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier
-             || (pAd->CommonCfg.CarrierDetect.Enable == TRUE)
-#endif // CARRIER_DETECTION_SUPPORT //
             )
 		{
 			//
@@ -541,7 +529,7 @@ VOID MlmeStartReqAction(
 		pAd->MlmeAux.ExtRateLen = pAd->CommonCfg.ExtRateLen;
 		NdisMoveMemory(pAd->MlmeAux.ExtRate, pAd->CommonCfg.ExtRate, MAX_LEN_OF_SUPPORTED_RATES);
 		RTMPCheckRates(pAd, pAd->MlmeAux.ExtRate, &pAd->MlmeAux.ExtRateLen);
-#ifdef DOT11_N_SUPPORT
+
 		if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
 		{
 			RTMPUpdateHTIE(&pAd->CommonCfg.DesiredHtPhy, &pAd->StaCfg.DesiredHtPhyInfo.MCSSet[0], &pAd->MlmeAux.HtCapability, &pAd->MlmeAux.AddHtInfo);
@@ -550,7 +538,6 @@ VOID MlmeStartReqAction(
 			DBGPRINT(RT_DEBUG_TRACE, ("SYNC -pAd->StaActive.SupportedHtPhy.bHtEnable = TRUE\n"));
 		}
 		else
-#endif // DOT11_N_SUPPORT //
 		{
 			pAd->MlmeAux.HtCapabilityLen = 0;
 			pAd->StaActive.SupportedPhyInfo.bHtEnable = FALSE;
@@ -618,10 +605,9 @@ VOID PeerBeaconAtScanAction(
 	// Init Variable IE structure
 	pVIE = (PNDIS_802_11_VARIABLE_IEs) VarIE;
 	pVIE->Length = 0;
-#ifdef DOT11_N_SUPPORT
+
     RTMPZeroMemory(&HtCapability, sizeof(HtCapability));
 	RTMPZeroMemory(&AddHtInfo, sizeof(ADD_HT_INFO_IE));
-#endif // DOT11_N_SUPPORT //
 
 	if (PeerBeaconAndProbeRspSanity(pAd,
 								Elem->Msg,
@@ -672,11 +658,9 @@ VOID PeerBeaconAtScanAction(
 
 		Rssi = RTMPMaxRssi(pAd, ConvertToRssi(pAd, Elem->Rssi0, RSSI_0), ConvertToRssi(pAd, Elem->Rssi1, RSSI_1), ConvertToRssi(pAd, Elem->Rssi2, RSSI_2));
 
-
-#ifdef DOT11_N_SUPPORT
 		if ((HtCapabilityLen > 0) || (PreNHtCapabilityLen > 0))
 			HtCapabilityLen = SIZE_HT_CAP_IE;
-#endif // DOT11_N_SUPPORT //
+
 		if ((pAd->StaCfg.CCXReqType != MSRN_TYPE_UNUSED) && (Channel == pAd->StaCfg.CCXScanChannel))
 		{
 			Idx = BssTableSetEntry(pAd, &pAd->StaCfg.CCXBssTab, Bssid, Ssid, SsidLen, BssType, BeaconPeriod,
@@ -698,16 +682,7 @@ VOID PeerBeaconAtScanAction(
 						  &CfParm, AtimWin, CapabilityInfo, SupRate, SupRateLen, ExtRate, ExtRateLen,  &HtCapability,
 						 &AddHtInfo, HtCapabilityLen, AddHtInfoLen, NewExtChannelOffset, Channel, Rssi, TimeStamp, CkipFlag,
 						 &EdcaParm, &QosCapability, &QbssLoad, LenVIE, pVIE);
-#ifdef DOT11_N_SUPPORT
-#ifdef DOT11N_DRAFT3
-			if (pAd->ChannelList[pAd->CommonCfg.ChannelListIdx].bEffectedChannel == TRUE)
-			{
-				UCHAR		RegClass;
-				PeerBeaconAndProbeRspSanity2(pAd, Elem->Msg, Elem->MsgLen, &RegClass);
-				TriEventTableSetEntry(pAd, &pAd->CommonCfg.TriggerEventTab, Bssid, &HtCapability, HtCapabilityLen, RegClass, Channel);
-			}
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
+
 			if (Idx != BSS_NOT_FOUND)
 			{
 				NdisMoveMemory(pAd->ScanTab.BssEntry[Idx].PTSF, &Elem->Msg[24], 4);
@@ -755,9 +730,7 @@ VOID PeerBeaconAtJoinAction(
 	UCHAR				HtCapabilityLen = 0, PreNHtCapabilityLen = 0;
 	UCHAR			AddHtInfoLen;
 	UCHAR			NewExtChannelOffset = 0xff;
-#ifdef DOT11_N_SUPPORT
 	UCHAR			CentralChannel;
-#endif // DOT11_N_SUPPORT //
 
 	// Init Variable IE structure
 	pVIE = (PNDIS_802_11_VARIABLE_IEs) VarIE;
@@ -873,7 +846,7 @@ VOID PeerBeaconAtJoinAction(
 			RTMPCheckRates(pAd, pAd->MlmeAux.ExtRate, &pAd->MlmeAux.ExtRateLen);
 
             NdisZeroMemory(pAd->StaActive.SupportedPhyInfo.MCSSet, 16);
-#ifdef DOT11_N_SUPPORT
+
 			pAd->MlmeAux.NewExtChannelOffset = NewExtChannelOffset;
 			pAd->MlmeAux.HtCapabilityLen = HtCapabilityLen;
 
@@ -918,7 +891,6 @@ VOID PeerBeaconAtJoinAction(
 
 			}
 			else
-#endif // DOT11_N_SUPPORT //
 			{
    				// To prevent error, let legacy AP must have same CentralChannel and Channel.
 				if ((HtCapabilityLen == 0) && (PreNHtCapabilityLen == 0))
@@ -933,9 +905,7 @@ VOID PeerBeaconAtJoinAction(
 
 			// copy QOS related information
 			if ((pAd->CommonCfg.bWmmCapable)
-#ifdef DOT11_N_SUPPORT
 				 || (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
-#endif // DOT11_N_SUPPORT //
 				)
 			{
 				NdisMoveMemory(&pAd->MlmeAux.APEdcaParm, &EdcaParm, sizeof(EDCA_PARM));
@@ -952,15 +922,6 @@ VOID PeerBeaconAtJoinAction(
 			DBGPRINT(RT_DEBUG_TRACE, ("SYNC - after JOIN, SupRateLen=%d, ExtRateLen=%d\n",
 										pAd->MlmeAux.SupRateLen, pAd->MlmeAux.ExtRateLen));
 
-#ifdef LEAP_SUPPORT
-			// Update CkipFlag
-			pAd->StaCfg.CkipFlag = CkipFlag;
-
-			// Keep TimeStamp for Re-Association used.
-			if (LEAP_CCKM_ON(pAd) && (pAd->StaCfg.CCKMLinkUpFlag == TRUE))
-				pAd->StaCfg.CCKMBeaconAtJoinTimeStamp = TimeStamp;
-#endif // LEAP_SUPPORT //
-
 			if (AironetCellPowerLimit != 0xFF)
 			{
 				//We need to change our TxPower for CCX 2.0 AP Control of Client Transmit Power
@@ -1018,14 +979,6 @@ VOID PeerBeacon(
 	UCHAR			AddHtInfoLen;
 	UCHAR			NewExtChannelOffset = 0xff;
 
-
-#ifdef RALINK_ATE
-    if (ATE_ON(pAd))
-    {
-		return;
-    }
-#endif // RALINK_ATE //
-
 	if (!(INFRA_ON(pAd) || ADHOC_ON(pAd)
 		))
 		return;
@@ -1093,14 +1046,12 @@ VOID PeerBeacon(
 		if (pAd->Mlme.CntlMachine.CurrState == CNTL_WAIT_DISASSOC)
 			return;
 
-#ifdef DOT11_N_SUPPORT
 		// Copy Control channel for this BSSID.
 		if (AddHtInfoLen != 0)
 			Channel = AddHtInfo.ControlChan;
 
 		if ((HtCapabilityLen > 0) || (PreNHtCapabilityLen > 0))
 			HtCapabilityLen = SIZE_HT_CAP_IE;
-#endif // DOT11_N_SUPPORT //
 
 		//
 		// Housekeeping "SsidBssTab" table for later-on ROAMing usage.
@@ -1165,6 +1116,10 @@ VOID PeerBeacon(
 			// Add the safeguard against the mismatch of adhoc wep status
 			if (pAd->StaCfg.WepStatus != pAd->ScanTab.BssEntry[Bssidx].WepStatus)
 			{
+#ifdef RT30xx
+				DBGPRINT(RT_DEBUG_TRACE, ("SYNC - Not matched wep status %d %d\n", pAd->StaCfg.WepStatus, pAd->ScanTab.BssEntry[Bssidx].WepStatus));
+				DBGPRINT(RT_DEBUG_TRACE, ("bssid=%s\n", pAd->ScanTab.BssEntry[Bssidx].Bssid));
+#endif
 				return;
 			}
 
@@ -1228,11 +1183,14 @@ VOID PeerBeacon(
 				pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault;
 			}
 
+#ifdef RT2860
 			// at least one 11b peer joined. downgrade the MaxTxRate to 11Mbps
 			// after last 11b peer left for several seconds, we'll auto switch back to 11G rate
 			// in MlmePeriodicExec()
+#endif
 			if (ADHOC_ON(pAd) && (CAP_IS_IBSS_ON(CapabilityInfo)))
 			{
+#ifdef RT2860
 				BOOLEAN	bRestart;
                 BOOLEAN	bnRestart;
 
@@ -1260,7 +1218,7 @@ VOID PeerBeacon(
 						pAd->StaCfg.Last11bBeaconRxTime = Now;
 						break;
 					}
-#ifdef DOT11_N_SUPPORT
+
 					// Update Ht Phy.
 					if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
 					{
@@ -1316,7 +1274,6 @@ VOID PeerBeacon(
 
 					}
 					else
-#endif // DOT11_N_SUPPORT //
 					{
 						RTMPZeroMemory(&pAd->MlmeAux.HtCapability, SIZE_HT_CAP_IE);
 						RTMPZeroMemory(&pAd->MlmeAux.AddHtInfo, SIZE_ADD_HT_INFO_IE);
@@ -1330,7 +1287,6 @@ VOID PeerBeacon(
 					MakeIbssBeacon(pAd);        // re-build BEACON frame
 					AsicEnableIbssSync(pAd);    // copy to on-chip memory
 				}
-#ifdef DOT11_N_SUPPORT
 				else if ((bRestart == TRUE) && (bnRestart == TRUE))
 				{
 					MlmeUpdateTxRates(pAd, FALSE, BSS0);
@@ -1338,7 +1294,6 @@ VOID PeerBeacon(
 					MakeIbssBeacon(pAd);        // re-build BEACON frame
 					AsicEnableIbssSync(pAd);    // copy to on-chip memory
 				}
-#endif // DOT11_N_SUPPORT //
 
 				// At least another peer in this IBSS, declare MediaState as CONNECTED
 				if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
@@ -1402,29 +1357,12 @@ VOID PeerBeacon(
 	        					}
 								MlmeUpdateTxRates(pAd, FALSE, 0);
 	                        }
-#ifdef DOT11_N_SUPPORT
 							else
 							{
 								MlmeUpdateTxRates(pAd, FALSE, 0);
 								MlmeUpdateHtTxRates(pAd, BSS0);
 							}
-#endif // DOT11_N_SUPPORT //
 
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-	                        if (pAd->StaCfg.WpaSupplicantUP)
-	                        {
-	                            union iwreq_data    wrqu;
-
-	                            SendAssocIEsToWpaSupplicant(pAd);
-	                            memset(&wrqu, 0, sizeof(wrqu));
-	                            wrqu.data.flags = RT_ASSOC_EVENT_FLAG;
-	                            wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL);
-	                        }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
 	                        {
 	                            union iwreq_data    wrqu;
 	                            wext_notify_event_assoc(pAd);
@@ -1434,10 +1372,82 @@ VOID PeerBeacon(
 	                            wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
 
 	                        }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
 						}
 					}
 				}
+#endif /* RT2860 */
+#ifdef RT2870
+				UCHAR			MaxSupportedRateIn500Kbps = 0;
+				UCHAR			idx;
+				MAC_TABLE_ENTRY *pEntry;
+
+				// supported rates array may not be sorted. sort it and find the maximum rate
+			    for (idx=0; idx<SupRateLen; idx++)
+			    {
+			        if (MaxSupportedRateIn500Kbps < (SupRate[idx] & 0x7f))
+			            MaxSupportedRateIn500Kbps = SupRate[idx] & 0x7f;
+			    }
+
+				for (idx=0; idx<ExtRateLen; idx++)
+			    {
+			        if (MaxSupportedRateIn500Kbps < (ExtRate[idx] & 0x7f))
+			            MaxSupportedRateIn500Kbps = ExtRate[idx] & 0x7f;
+			    }
+
+				// look up the existing table
+				pEntry = MacTableLookup(pAd, Addr2);
+
+				// Ad-hoc mode is using MAC address as BA session. So we need to continuously find newly joined adhoc station by receiving beacon.
+				// To prevent always check this, we use wcid == RESERVED_WCID to recognize it as newly joined adhoc station.
+				if ((ADHOC_ON(pAd) && (Elem->Wcid == RESERVED_WCID)) ||
+					(pEntry && ((pEntry->LastBeaconRxTime + ADHOC_ENTRY_BEACON_LOST_TIME) < Now)))
+				{
+					if (pEntry == NULL)
+						// Another adhoc joining, add to our MAC table.
+						pEntry = MacTableInsertEntry(pAd, Addr2, BSS0, FALSE);
+
+					if (StaAddMacTableEntry(pAd, pEntry, MaxSupportedRateIn500Kbps, &HtCapability, HtCapabilityLen, CapabilityInfo) == FALSE)
+					{
+						DBGPRINT(RT_DEBUG_TRACE, ("ADHOC - Add Entry failed.\n"));
+						return;
+					}
+
+					if (pEntry &&
+						(Elem->Wcid == RESERVED_WCID))
+					{
+						idx = pAd->StaCfg.DefaultKeyId;
+						RT28XX_STA_SECURITY_INFO_ADD(pAd, BSS0, idx, pEntry);
+					}
+				}
+
+				if (pEntry && pEntry->ValidAsCLI)
+					pEntry->LastBeaconRxTime = Now;
+
+				// At least another peer in this IBSS, declare MediaState as CONNECTED
+				if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
+				{
+					OPSTATUS_SET_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
+
+					pAd->IndicateMediaState = NdisMediaStateConnected;
+					RTMP_IndicateMediaState(pAd);
+	                pAd->ExtraInfo = GENERAL_LINK_UP;
+					AsicSetBssid(pAd, pAd->CommonCfg.Bssid);
+
+					// 2003/03/12 - john
+					// Make sure this entry in "ScanTab" table, thus complies to Microsoft's policy that
+					// "site survey" result should always include the current connected network.
+					//
+					Bssidx = BssTableSearch(&pAd->ScanTab, Bssid, Channel);
+					if (Bssidx == BSS_NOT_FOUND)
+					{
+						Bssidx = BssTableSetEntry(pAd, &pAd->ScanTab, Bssid, Ssid, SsidLen, BssType, BeaconPeriod,
+									&CfParm, AtimWin, CapabilityInfo, SupRate, SupRateLen, ExtRate, ExtRateLen, &HtCapability,
+									&AddHtInfo, HtCapabilityLen, AddHtInfoLen, NewExtChannelOffset, Channel, RealRssi, TimeStamp, 0,
+									&EdcaParm, &QosCapability, &QbssLoad, LenVIE, pVIE);
+					}
+					DBGPRINT(RT_DEBUG_TRACE, ("ADHOC  fOP_STATUS_MEDIA_STATE_CONNECTED.\n"));
+				}
+#endif /* RT2870 */
 			}
 
 			if (INFRA_ON(pAd))
@@ -1476,7 +1486,6 @@ VOID PeerBeacon(
 					DBGPRINT(RT_DEBUG_WARN, ("SYNC - AP changed B/G protection to %d\n", bUseBGProtection));
 				}
 
-#ifdef DOT11_N_SUPPORT
 				// check Ht protection mode. and adhere to the Non-GF device indication by AP.
 				if ((AddHtInfoLen != 0) &&
 					((AddHtInfo.AddHtInfo2.OperaionMode != pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode) ||
@@ -1493,7 +1502,6 @@ VOID PeerBeacon(
 
 					DBGPRINT(RT_DEBUG_TRACE, ("SYNC - AP changed N OperaionMode to %d\n", pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode));
 				}
-#endif // DOT11_N_SUPPORT //
 
 				if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED) &&
 					ERP_IS_USE_BARKER_PREAMBLE(Erp))
@@ -1528,10 +1536,12 @@ VOID PeerBeacon(
 				//  5. otherwise, put PHY back to sleep to save battery.
 				if (MessageToMe)
 				{
+#ifdef RT2860
 					if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
 					{
 						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, pAd->StaCfg.BBPR3);
 					}
+#endif
 					if (pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable &&
 						pAd->CommonCfg.bAPSDAC_BE && pAd->CommonCfg.bAPSDAC_BK && pAd->CommonCfg.bAPSDAC_VI && pAd->CommonCfg.bAPSDAC_VO)
 					{
@@ -1542,10 +1552,12 @@ VOID PeerBeacon(
 				}
 				else if (BcastFlag && (DtimCount == 0) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM))
 				{
+#ifdef RT2860
 					if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
 					{
 						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, pAd->StaCfg.BBPR3);
 					}
+#endif
 				}
 				else if ((pAd->TxSwQueue[QID_AC_BK].Number != 0)													||
 						(pAd->TxSwQueue[QID_AC_BE].Number != 0)														||
@@ -1559,10 +1571,12 @@ VOID PeerBeacon(
 				{
 					// TODO: consider scheduled HCCA. might not be proper to use traditional DTIM-based power-saving scheme
 					// can we cheat here (i.e. just check MGMT & AC_BE) for better performance?
+#ifdef RT2860
 					if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
 					{
 						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, pAd->StaCfg.BBPR3);
 					}
+#endif
 				}
 				else
 				{
@@ -1577,10 +1591,14 @@ VOID PeerBeacon(
 
 					if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
 					{
+#ifdef RT2860
 						// Set a flag to go to sleep . Then after parse this RxDoneInterrupt, will go to sleep mode.
 						RTMP_SET_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW);
 						pAd->ThisTbttNumToNextWakeUp = TbttNumToNextWakeUp;
-						//AsicSleepThenAutoWakeup(pAd, TbttNumToNextWakeUp);
+#endif
+#ifdef RT2870
+						AsicSleepThenAutoWakeup(pAd, TbttNumToNextWakeUp);
+#endif
 					}
 				}
 			}
@@ -1603,9 +1621,7 @@ VOID PeerProbeReqAction(
 	UCHAR         Addr2[MAC_ADDR_LEN];
 	CHAR          Ssid[MAX_LEN_OF_SSID];
 	UCHAR         SsidLen;
-#ifdef DOT11_N_SUPPORT
 	UCHAR		  HtLen, AddHtLen, NewExtLen;
-#endif // DOT11_N_SUPPORT //
 	HEADER_802_11 ProbeRspHdr;
 	NDIS_STATUS   NStatus;
 	PUCHAR        pOutBuffer = NULL;
@@ -1678,7 +1694,7 @@ VOID PeerProbeReqAction(
 						  			END_OF_ARGS);
 				FrameLen += tmp;
 			}
-#ifdef DOT11_N_SUPPORT
+
 			if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
 			{
 				ULONG TmpLen;
@@ -1711,7 +1727,7 @@ VOID PeerProbeReqAction(
 				}
 				FrameLen += TmpLen;
 			}
-#endif // DOT11_N_SUPPORT //
+
 			MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
 			MlmeFreeMemory(pAd, pOutBuffer);
 		}
@@ -1811,14 +1827,6 @@ VOID InvalidStateWhenStart(
 VOID EnqueuePsPoll(
 	IN PRTMP_ADAPTER pAd)
 {
-#ifdef RALINK_ATE
-    if (ATE_ON(pAd))
-    {
-		return;
-    }
-#endif // RALINK_ATE //
-
-
 	if (pAd->StaCfg.WindowsPowerMode == Ndis802_11PowerModeLegacy_PSP)
     	pAd->PsPollFrame.FC.PwrMgmt = PWR_SAVE;
 	MiniportMMRequest(pAd, 0, (PUCHAR)&pAd->PsPollFrame, sizeof(PSPOLL_FRAME));
@@ -1861,88 +1869,6 @@ VOID EnqueueProbeRequest(
 
 }
 
-#ifdef DOT11_N_SUPPORT
-#ifdef DOT11N_DRAFT3
-VOID BuildEffectedChannelList(
-	IN PRTMP_ADAPTER pAd)
-{
-	UCHAR		EChannel[11];
-	UCHAR		i, j, k;
-	UCHAR		UpperChannel = 0, LowerChannel = 0;
-
-	RTMPZeroMemory(EChannel, 11);
-	i = 0;
-	// Find upper channel and lower channel.
-	if (pAd->CommonCfg.CentralChannel < pAd->CommonCfg.Channel)
-	{
-		UpperChannel = pAd->CommonCfg.Channel;
-		LowerChannel = pAd->CommonCfg.CentralChannel;
-	}
-	else if (pAd->CommonCfg.CentralChannel > pAd->CommonCfg.Channel)
-	{
-		UpperChannel = pAd->CommonCfg.CentralChannel;
-		LowerChannel = pAd->CommonCfg.Channel;
-	}
-	else
-	{
-		return;
-	}
-
-	// Record channels that is below lower channel..
-	if (LowerChannel > 1)
-	{
-		EChannel[0] = LowerChannel - 1;
-		i = 1;
-		if (LowerChannel > 2)
-		{
-			EChannel[1] = LowerChannel - 2;
-			i = 2;
-			if (LowerChannel > 3)
-			{
-				EChannel[2] = LowerChannel - 3;
-				i = 3;
-			}
-		}
-	}
-	// Record channels that is between  lower channel and upper channel.
-	for (k = LowerChannel;k < UpperChannel;k++)
-	{
-		EChannel[i] = k;
-		i++;
-	}
-	// Record channels that is above upper channel..
-	if (LowerChannel < 11)
-	{
-		EChannel[i] = UpperChannel + 1;
-		i++;
-		if (LowerChannel < 10)
-		{
-			EChannel[i] = LowerChannel + 2;
-			i++;
-			if (LowerChannel < 9)
-			{
-				EChannel[i] = LowerChannel + 3;
-				i++;
-			}
-		}
-	}
-	//
-	for (j = 0;j < i;j++)
-	{
-		for (k = 0;k < pAd->ChannelListNum;k++)
-		{
-			if (pAd->ChannelList[k].Channel == EChannel[j])
-			{
-				pAd->ChannelList[k].bEffectedChannel = TRUE;
-				DBGPRINT(RT_DEBUG_TRACE,(" EffectedChannel( =%d)\n", EChannel[j]));
-				break;
-			}
-		}
-	}
-}
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
-
 BOOLEAN ScanRunning(
 		IN PRTMP_ADAPTER pAd)
 {
diff --git a/drivers/staging/rt2860/sta/wpa.c b/drivers/staging/rt2860/sta/wpa.c
index 2609d845fd5..58274364d78 100644
--- a/drivers/staging/rt2860/sta/wpa.c
+++ b/drivers/staging/rt2860/sta/wpa.c
@@ -1384,10 +1384,12 @@ VOID	WpaGroupMsg1Action(
 			pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_TKIP;
 		else if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled)
 			pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_AES;
+#ifndef RT30xx
 		else if (pAd->StaCfg.GroupCipher == Ndis802_11GroupWEP40Enabled)
 			pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_WEP64;
 		else if (pAd->StaCfg.GroupCipher == Ndis802_11GroupWEP104Enabled)
 			pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_WEP128;
+#endif
 
     	//hex_dump("Group Key :", pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key, LEN_TKIP_EK);
 	}
@@ -1764,7 +1766,12 @@ BOOLEAN ParseKeyData(
 	// Get GTK length - refer to IEEE 802.11i-2004 p.82
 	GTKLEN = pKDE->Len -6;
 
+#ifdef RT30xx
+	if (GTKLEN < LEN_AES_KEY)
+#endif
+#ifndef RT30xx
 	if (GTKLEN < MIN_LEN_OF_GTK)
+#endif
 	{
 		DBGPRINT(RT_DEBUG_ERROR, ("ERROR: GTK Key length is too short (%d) \n", GTKLEN));
         return FALSE;
@@ -1790,10 +1797,12 @@ BOOLEAN ParseKeyData(
 		pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_TKIP;
 	else if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled)
 		pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_AES;
+#ifndef RT30xx
 	else if (pAd->StaCfg.GroupCipher == Ndis802_11GroupWEP40Enabled)
 		pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_WEP64;
 	else if (pAd->StaCfg.GroupCipher == Ndis802_11GroupWEP104Enabled)
 		pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_WEP128;
+#endif
 
 	return TRUE;
 
@@ -1915,8 +1924,6 @@ VOID	RTMPReportMicError(
     }
 }
 
-
-#ifdef WPA_SUPPLICANT_SUPPORT
 #define	LENGTH_EAP_H    4
 // If the received frame is EAP-Packet ,find out its EAP-Code (Request(0x01), Response(0x02), Success(0x03), Failure(0x04)).
 INT	    WpaCheckEapCode(
@@ -1957,7 +1964,6 @@ VOID    WpaSendMicFailureToWpaSupplicant(
 
     return;
 }
-#endif // WPA_SUPPLICANT_SUPPORT //
 
 VOID	WpaMicFailureReportFrame(
 	IN  PRTMP_ADAPTER   pAd,
diff --git a/drivers/staging/rt2860/sta_ioctl.c b/drivers/staging/rt2860/sta_ioctl.c
index c5452f152a2..eb0109ad2fc 100644
--- a/drivers/staging/rt2860/sta_ioctl.c
+++ b/drivers/staging/rt2860/sta_ioctl.c
@@ -49,10 +49,6 @@ extern ULONG    RTDebugLevel;
 
 #define GROUP_KEY_NO                4
 
-#define IWE_STREAM_ADD_EVENT(_A, _B, _C, _D, _E)		iwe_stream_add_event(_A, _B, _C, _D, _E)
-#define IWE_STREAM_ADD_POINT(_A, _B, _C, _D, _E)		iwe_stream_add_point(_A, _B, _C, _D, _E)
-#define IWE_STREAM_ADD_VALUE(_A, _B, _C, _D, _E, _F)	iwe_stream_add_value(_A, _B, _C, _D, _E, _F)
-
 extern UCHAR    CipherWpa2Template[];
 extern UCHAR    CipherWpaPskTkip[];
 extern UCHAR    CipherWpaPskTkipLen;
@@ -89,12 +85,12 @@ struct iw_priv_args privtab[] = {
 	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "radio_off" },
 	{ RAIO_ON,
 	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "radio_on" },
-#ifdef QOS_DLS_SUPPORT
-	{ SHOW_DLS_ENTRY_INFO,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "dlsentryinfo" },
-#endif // QOS_DLS_SUPPORT //
 	{ SHOW_CFG_VALUE,
 	  IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "show" },
+#if !defined(RT2860) && !defined(RT30xx)
+	{ SHOW_ADHOC_ENTRY_INFO,
+	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "adhocEntry" },
+#endif
 /* --- sub-ioctls relations --- */
 
 #ifdef DBG
@@ -104,6 +100,11 @@ struct iw_priv_args privtab[] = {
 { RTPRIV_IOCTL_MAC,
   IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | 1024,
   "mac"},
+#ifdef RT30xx
+{ RTPRIV_IOCTL_RF,
+  IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
+  "rf"},
+#endif // RT30xx //
 { RTPRIV_IOCTL_E2P,
   IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | 1024,
   "e2p"},
@@ -168,16 +169,16 @@ INT Set_PSMode_Proc(
     IN  PRTMP_ADAPTER   pAdapter,
     IN  PUCHAR          arg);
 
-#ifdef WPA_SUPPLICANT_SUPPORT
 INT Set_Wpa_Support(
     IN	PRTMP_ADAPTER	pAd,
 	IN	PUCHAR			arg);
-#endif // WPA_SUPPLICANT_SUPPORT //
 
 #ifdef DBG
+#if !defined(RT2860) && !defined(RT30xx)
 VOID RTMPIoctlBBP(
 	IN	PRTMP_ADAPTER	pAdapter,
 	IN	struct iwreq	*wrq);
+#endif
 
 VOID RTMPIoctlMAC(
 	IN	PRTMP_ADAPTER	pAdapter,
@@ -186,6 +187,12 @@ VOID RTMPIoctlMAC(
 VOID RTMPIoctlE2PROM(
     IN  PRTMP_ADAPTER   pAdapter,
     IN  struct iwreq    *wrq);
+
+#ifdef RT30xx
+VOID RTMPIoctlRF(
+    IN  PRTMP_ADAPTER   pAdapter,
+    IN  struct iwreq    *wrq);
+#endif // RT30xx //
 #endif // DBG //
 
 
@@ -197,11 +204,9 @@ INT Set_FragTest_Proc(
     IN  PRTMP_ADAPTER   pAdapter,
     IN  PUCHAR          arg);
 
-#ifdef DOT11_N_SUPPORT
 INT Set_TGnWifiTest_Proc(
     IN  PRTMP_ADAPTER   pAd,
     IN  PUCHAR          arg);
-#endif // DOT11_N_SUPPORT //
 
 INT Set_LongRetryLimit_Proc(
 	IN	PRTMP_ADAPTER	pAdapter,
@@ -211,17 +216,11 @@ INT Set_ShortRetryLimit_Proc(
 	IN	PRTMP_ADAPTER	pAdapter,
 	IN	PUCHAR			arg);
 
-#ifdef EXT_BUILD_CHANNEL_LIST
-INT Set_Ieee80211dClientMode_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-#endif // EXT_BUILD_CHANNEL_LIST //
-
-#ifdef CARRIER_DETECTION_SUPPORT
-INT Set_CarrierDetect_Proc(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          arg);
-#endif // CARRIER_DETECTION_SUPPORT //
+#if !defined(RT2860) && !defined(RT30xx)
+INT	Show_Adhoc_MacTable_Proc(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	PCHAR			extra);
+#endif
 
 static struct {
 	CHAR *name;
@@ -239,7 +238,6 @@ static struct {
 	{"BGProtection",				Set_BGProtection_Proc},
 	{"RTSThreshold",				Set_RTSThreshold_Proc},
 	{"FragThreshold",				Set_FragThreshold_Proc},
-#ifdef DOT11_N_SUPPORT
 	{"HtBw",		                Set_HtBw_Proc},
 	{"HtMcs",		                Set_HtMcs_Proc},
 	{"HtGi",		                Set_HtGi_Proc},
@@ -253,8 +251,6 @@ static struct {
 	{"HtBaDecline",					Set_BADecline_Proc},
 	{"HtProtect",		        	Set_HtProtect_Proc},
 	{"HtMimoPs",		        	Set_HtMimoPs_Proc},
-#endif // DOT11_N_SUPPORT //
-
 #ifdef AGGREGATION_SUPPORT
 	{"PktAggregate",				Set_PktAggregate_Proc},
 #endif
@@ -277,68 +273,19 @@ static struct {
 #ifdef DBG
 	{"Debug",						Set_Debug_Proc},
 #endif
-
-#ifdef RALINK_ATE
-	{"ATE",							Set_ATE_Proc},
-	{"ATEDA",						Set_ATE_DA_Proc},
-	{"ATESA",						Set_ATE_SA_Proc},
-	{"ATEBSSID",					Set_ATE_BSSID_Proc},
-	{"ATECHANNEL",					Set_ATE_CHANNEL_Proc},
-	{"ATETXPOW0",					Set_ATE_TX_POWER0_Proc},
-	{"ATETXPOW1",					Set_ATE_TX_POWER1_Proc},
-	{"ATETXANT",					Set_ATE_TX_Antenna_Proc},
-	{"ATERXANT",					Set_ATE_RX_Antenna_Proc},
-	{"ATETXFREQOFFSET",				Set_ATE_TX_FREQOFFSET_Proc},
-	{"ATETXBW",						Set_ATE_TX_BW_Proc},
-	{"ATETXLEN",					Set_ATE_TX_LENGTH_Proc},
-	{"ATETXCNT",					Set_ATE_TX_COUNT_Proc},
-	{"ATETXMCS",					Set_ATE_TX_MCS_Proc},
-	{"ATETXMODE",					Set_ATE_TX_MODE_Proc},
-	{"ATETXGI",						Set_ATE_TX_GI_Proc},
-	{"ATERXFER",					Set_ATE_RX_FER_Proc},
-	{"ATERRF",						Set_ATE_Read_RF_Proc},
-	{"ATEWRF1",						Set_ATE_Write_RF1_Proc},
-	{"ATEWRF2",						Set_ATE_Write_RF2_Proc},
-	{"ATEWRF3",						Set_ATE_Write_RF3_Proc},
-	{"ATEWRF4",						Set_ATE_Write_RF4_Proc},
-	{"ATELDE2P",				    Set_ATE_Load_E2P_Proc},
-	{"ATERE2P",						Set_ATE_Read_E2P_Proc},
-	{"ATESHOW",						Set_ATE_Show_Proc},
-	{"ATEHELP",						Set_ATE_Help_Proc},
-
-#ifdef RALINK_28xx_QA
-	{"TxStop",						Set_TxStop_Proc},
-	{"RxStop",						Set_RxStop_Proc},
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
-#ifdef WPA_SUPPLICANT_SUPPORT
     {"WpaSupport",                  Set_Wpa_Support},
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-
-
 	{"FixedTxMode",                 Set_FixedTxMode_Proc},
-#ifdef CONFIG_APSTA_MIXED_SUPPORT
-	{"OpMode",						Set_OpMode_Proc},
-#endif // CONFIG_APSTA_MIXED_SUPPORT //
-#ifdef DOT11_N_SUPPORT
     {"TGnWifiTest",                 Set_TGnWifiTest_Proc},
     {"ForceGF",		        		Set_ForceGF_Proc},
-#endif // DOT11_N_SUPPORT //
-#ifdef QOS_DLS_SUPPORT
-	{"DlsAddEntry",					Set_DlsAddEntry_Proc},
-	{"DlsTearDownEntry",			Set_DlsTearDownEntry_Proc},
-#endif // QOS_DLS_SUPPORT //
 	{"LongRetry",	        		Set_LongRetryLimit_Proc},
 	{"ShortRetry",	        		Set_ShortRetryLimit_Proc},
-#ifdef EXT_BUILD_CHANNEL_LIST
-	{"11dClientMode",				Set_Ieee80211dClientMode_Proc},
-#endif // EXT_BUILD_CHANNEL_LIST //
-#ifdef CARRIER_DETECTION_SUPPORT
-	{"CarrierDetect",				Set_CarrierDetect_Proc},
-#endif // CARRIER_DETECTION_SUPPORT //
-
+//2008/09/11:KH add to support efuse<--
+#ifdef RT30xx
+	{"efuseFreeNumber",				set_eFuseGetFreeBlockCount_Proc},
+	{"efuseDump",					set_eFusedump_Proc},
+	{"efuseLoadFromBin",				set_eFuseLoadFromBin_Proc},
+#endif // RT30xx //
+//2008/09/11:KH add to support efuse-->
 	{NULL,}
 };
 
@@ -352,6 +299,7 @@ VOID RTMPAddKey(
 
     DBGPRINT(RT_DEBUG_TRACE, ("RTMPAddKey ------>\n"));
 
+#ifdef RT2860
 	RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
 	if (RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND))
 	{
@@ -365,6 +313,7 @@ VOID RTMPAddKey(
 		RTMPusecDelay(6000);
 		pAd->bPCIclkOff = FALSE;
 	}
+#endif
 
 	if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
 	{
@@ -380,14 +329,13 @@ VOID RTMPAddKey(
 		    NdisZeroMemory(&pAd->SharedKey[BSS0][0], sizeof(CIPHER_KEY));
             pAd->SharedKey[BSS0][0].KeyLen = LEN_TKIP_EK;
             NdisMoveMemory(pAd->SharedKey[BSS0][0].Key, pKey->KeyMaterial, LEN_TKIP_EK);
-#ifdef WPA_SUPPLICANT_SUPPORT
+
             if (pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled)
             {
                 NdisMoveMemory(pAd->SharedKey[BSS0][0].RxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK);
                 NdisMoveMemory(pAd->SharedKey[BSS0][0].TxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK);
             }
             else
-#endif // WPA_SUPPLICANT_SUPPORT //
             {
             	NdisMoveMemory(pAd->SharedKey[BSS0][0].TxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK);
                 NdisMoveMemory(pAd->SharedKey[BSS0][0].RxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK);
@@ -440,14 +388,13 @@ VOID RTMPAddKey(
             NdisZeroMemory(&pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId], sizeof(CIPHER_KEY));
             pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].KeyLen = LEN_TKIP_EK;
             NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key, pKey->KeyMaterial, LEN_TKIP_EK);
-#ifdef WPA_SUPPLICANT_SUPPORT
+
             if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption2Enabled)
             {
                 NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].RxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK);
                 NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].TxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK);
             }
             else
-#endif // WPA_SUPPLICANT_SUPPORT //
             {
             	NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].TxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK);
                 NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].RxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK);
@@ -559,8 +506,10 @@ VOID RTMPAddKey(
 		}
 	}
 end:
+#ifdef RT2860
 	RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
     DBGPRINT(RT_DEBUG_INFO, ("<------ RTMPAddKey\n"));
+#endif
 	return;
 }
 
@@ -582,8 +531,12 @@ rt_ioctl_giwname(struct net_device *dev,
 		   char *name, char *extra)
 {
 //	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
+#ifdef RT2860
     strncpy(name, "RT2860 Wireless", IFNAMSIZ);
+#endif
+#ifdef RT2870
+	strncpy(name, "RT2870 Wireless", IFNAMSIZ);
+#endif // RT2870 //
 	return 0;
 }
 
@@ -625,7 +578,12 @@ int rt_ioctl_giwfreq(struct net_device *dev,
 		   struct iw_freq *freq, char *extra)
 {
     VIRTUAL_ADAPTER *pVirtualAd = NULL;
+#ifndef RT30xx
 	PRTMP_ADAPTER pAdapter = NULL;
+#endif
+#ifdef RT30xx
+	PRTMP_ADAPTER pAdapter;
+#endif
 	UCHAR ch;
 	ULONG	m;
 
@@ -636,7 +594,9 @@ int rt_ioctl_giwfreq(struct net_device *dev,
 	else
 	{
 		pVirtualAd = dev->ml_priv;
+#ifndef RT30xx
 		if (pVirtualAd && pVirtualAd->RtmpDev)
+#endif
 			pAdapter = pVirtualAd->RtmpDev->ml_priv;
 	}
 
@@ -696,6 +656,7 @@ int rt_ioctl_giwmode(struct net_device *dev,
 		   struct iw_request_info *info,
 		   __u32 *mode, char *extra)
 {
+#ifndef RT30xx
 	PRTMP_ADAPTER 	pAdapter = NULL;
 	VIRTUAL_ADAPTER *pVirtualAd = NULL;
 
@@ -716,6 +677,10 @@ int rt_ioctl_giwmode(struct net_device *dev,
 		   So the net_dev->ml_priv will be NULL in 2rd open */
 		return -ENETDOWN;
 	}
+#endif
+#ifdef RT30xx
+	PRTMP_ADAPTER pAdapter = dev->ml_priv;
+#endif
 
 	if (ADHOC_ON(pAdapter))
 		*mode = IW_MODE_ADHOC;
@@ -759,12 +724,18 @@ int rt_ioctl_giwrange(struct net_device *dev,
 		   struct iw_request_info *info,
 		   struct iw_point *data, char *extra)
 {
+#ifndef RT30xx
 	PRTMP_ADAPTER 	pAdapter = NULL;
 	VIRTUAL_ADAPTER *pVirtualAd = NULL;
+#endif
+#ifdef RT30xx
+	PRTMP_ADAPTER pAdapter = dev->ml_priv;
+#endif
 	struct iw_range *range = (struct iw_range *) extra;
 	u16 val;
 	int i;
 
+#ifndef RT30xx
 	if (dev->priv_flags == INT_MAIN)
 	{
 		pAdapter = dev->ml_priv;
@@ -782,6 +753,7 @@ int rt_ioctl_giwrange(struct net_device *dev,
 		   So the net_dev->ml_priv will be NULL in 2rd open */
 		return -ENETDOWN;
 	}
+#endif
 
 	DBGPRINT(RT_DEBUG_TRACE ,("===>rt_ioctl_giwrange\n"));
 	data->length = sizeof(struct iw_range);
@@ -901,6 +873,7 @@ int rt_ioctl_giwap(struct net_device *dev,
 		      struct iw_request_info *info,
 		      struct sockaddr *ap_addr, char *extra)
 {
+#ifndef RT30xx
 	PRTMP_ADAPTER 	pAdapter = NULL;
 	VIRTUAL_ADAPTER *pVirtualAd = NULL;
 
@@ -921,20 +894,22 @@ int rt_ioctl_giwap(struct net_device *dev,
 		   So the net_dev->ml_priv will be NULL in 2rd open */
 		return -ENETDOWN;
 	}
+#endif
+#ifdef RT30xx
+	PRTMP_ADAPTER pAdapter = dev->ml_priv;
+#endif
 
 	if (INFRA_ON(pAdapter) || ADHOC_ON(pAdapter))
 	{
 		ap_addr->sa_family = ARPHRD_ETHER;
 		memcpy(ap_addr->sa_data, &pAdapter->CommonCfg.Bssid, ETH_ALEN);
 	}
-#ifdef WPA_SUPPLICANT_SUPPORT
     // Add for RT2870
     else if (pAdapter->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
     {
         ap_addr->sa_family = ARPHRD_ETHER;
         memcpy(ap_addr->sa_data, &pAdapter->MlmeAux.Bssid, ETH_ALEN);
     }
-#endif // WPA_SUPPLICANT_SUPPORT //
 	else
 	{
 		DBGPRINT(RT_DEBUG_TRACE, ("IOCTL::SIOCGIWAP(=EMPTY)\n"));
@@ -1041,7 +1016,7 @@ int rt_ioctl_siwscan(struct net_device *dev,
         DBGPRINT(RT_DEBUG_TRACE, ("!!! Driver is in Monitor Mode now !!!\n"));
         return -EINVAL;
     }
-
+#ifdef RT2860
 	if ((pAdapter->OpMode == OPMODE_STA) && (IDLE_ON(pAdapter))
 		&& (pAdapter->StaCfg.bRadio == TRUE)
 		&& (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_IDLE_RADIO_OFF)))
@@ -1051,13 +1026,11 @@ int rt_ioctl_siwscan(struct net_device *dev,
 	// Check if still radio off.
 	else if (pAdapter->bPCIclkOff == TRUE)
 		return 0;
-
-#ifdef WPA_SUPPLICANT_SUPPORT
+#endif
 	if (pAdapter->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE)
 	{
 		pAdapter->StaCfg.WpaSupplicantScanCount++;
 	}
-#endif // WPA_SUPPLICANT_SUPPORT //
 
     pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE;
 	if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
@@ -1065,7 +1038,6 @@ int rt_ioctl_siwscan(struct net_device *dev,
 	do{
 		Now = jiffies;
 
-#ifdef WPA_SUPPLICANT_SUPPORT
 		if ((pAdapter->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE) &&
 			(pAdapter->StaCfg.WpaSupplicantScanCount > 3))
 		{
@@ -1073,7 +1045,6 @@ int rt_ioctl_siwscan(struct net_device *dev,
 			Status = NDIS_STATUS_SUCCESS;
 			break;
 		}
-#endif // WPA_SUPPLICANT_SUPPORT //
 
 		if ((OPSTATUS_TEST_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED)) &&
 			((pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA) ||
@@ -1133,13 +1104,10 @@ int rt_ioctl_giwscan(struct net_device *dev,
 		return -EAGAIN;
 	}
 
-
-#ifdef WPA_SUPPLICANT_SUPPORT
 	if (pAdapter->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE)
 	{
 		pAdapter->StaCfg.WpaSupplicantScanCount = 0;
 	}
-#endif // WPA_SUPPLICANT_SUPPORT //
 
 	if (pAdapter->ScanTab.BssNr == 0)
 	{
@@ -1175,7 +1143,88 @@ int rt_ioctl_giwscan(struct net_device *dev,
 		memcpy(iwe.u.ap_addr.sa_data, &pAdapter->ScanTab.BssEntry[i].Bssid, ETH_ALEN);
 
         previous_ev = current_ev;
-		current_ev = IWE_STREAM_ADD_EVENT(info, current_ev,end_buf, &iwe, IW_EV_ADDR_LEN);
+		current_ev = iwe_stream_add_event(info, current_ev,end_buf, &iwe, IW_EV_ADDR_LEN);
+#ifdef RT30xx
+        if (current_ev == previous_ev)
+#if WIRELESS_EXT >= 17
+            return -E2BIG;
+#else
+			break;
+#endif
+
+		/*
+		Protocol:
+			it will show scanned AP's WirelessMode .
+			it might be
+					802.11a
+					802.11a/n
+					802.11g/n
+					802.11b/g/n
+					802.11g
+					802.11b/g
+		*/
+		memset(&iwe, 0, sizeof(iwe));
+		iwe.cmd = SIOCGIWNAME;
+
+
+	{
+		PBSS_ENTRY pBssEntry=&pAdapter->ScanTab.BssEntry[i];
+		BOOLEAN isGonly=FALSE;
+		int rateCnt=0;
+
+		if (pBssEntry->Channel>14)
+		{
+			if (pBssEntry->HtCapabilityLen!=0)
+				strcpy(iwe.u.name,"802.11a/n");
+			else
+				strcpy(iwe.u.name,"802.11a");
+		}
+		else
+		{
+			/*
+				if one of non B mode rate is set supported rate . it mean G only.
+			*/
+			for (rateCnt=0;rateCnt<pBssEntry->SupRateLen;rateCnt++)
+			{
+				/*
+					6Mbps(140) 9Mbps(146) and >=12Mbps(152) are supported rate , it mean G only.
+				*/
+				if (pBssEntry->SupRate[rateCnt]==140 || pBssEntry->SupRate[rateCnt]==146 || pBssEntry->SupRate[rateCnt]>=152)
+					isGonly=TRUE;
+			}
+
+			for (rateCnt=0;rateCnt<pBssEntry->ExtRateLen;rateCnt++)
+			{
+				if (pBssEntry->ExtRate[rateCnt]==140 || pBssEntry->ExtRate[rateCnt]==146 || pBssEntry->ExtRate[rateCnt]>=152)
+					isGonly=TRUE;
+			}
+
+
+			if (pBssEntry->HtCapabilityLen!=0)
+			{
+				if (isGonly==TRUE)
+					strcpy(iwe.u.name,"802.11g/n");
+				else
+					strcpy(iwe.u.name,"802.11b/g/n");
+			}
+			else
+			{
+				if (isGonly==TRUE)
+					strcpy(iwe.u.name,"802.11g");
+				else
+				{
+					if (pBssEntry->SupRateLen==4 && pBssEntry->ExtRateLen==0)
+						strcpy(iwe.u.name,"802.11b");
+					else
+						strcpy(iwe.u.name,"802.11b/g");
+				}
+			}
+		}
+	}
+
+		previous_ev = current_ev;
+		current_ev	 = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_ADDR_LEN);
+#endif /* RT30xx */
         if (current_ev == previous_ev)
 #if WIRELESS_EXT >= 17
             return -E2BIG;
@@ -1191,7 +1240,7 @@ int rt_ioctl_giwscan(struct net_device *dev,
 		iwe.u.data.flags = 1;
 
         previous_ev = current_ev;
-		current_ev = IWE_STREAM_ADD_POINT(info, current_ev,end_buf, &iwe, pAdapter->ScanTab.BssEntry[i].Ssid);
+		current_ev = iwe_stream_add_point(info, current_ev,end_buf, &iwe, pAdapter->ScanTab.BssEntry[i].Ssid);
         if (current_ev == previous_ev)
 #if WIRELESS_EXT >= 17
             return -E2BIG;
@@ -1218,7 +1267,7 @@ int rt_ioctl_giwscan(struct net_device *dev,
 		iwe.len = IW_EV_UINT_LEN;
 
         previous_ev = current_ev;
-		current_ev = IWE_STREAM_ADD_EVENT(info, current_ev, end_buf, &iwe,  IW_EV_UINT_LEN);
+		current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe,  IW_EV_UINT_LEN);
         if (current_ev == previous_ev)
 #if WIRELESS_EXT >= 17
             return -E2BIG;
@@ -1238,7 +1287,7 @@ int rt_ioctl_giwscan(struct net_device *dev,
 		iwe.u.freq.i = 0;
 
 		previous_ev = current_ev;
-		current_ev = IWE_STREAM_ADD_EVENT(info, current_ev,end_buf, &iwe, IW_EV_FREQ_LEN);
+		current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_FREQ_LEN);
         if (current_ev == previous_ev)
 #if WIRELESS_EXT >= 17
             return -E2BIG;
@@ -1253,7 +1302,7 @@ int rt_ioctl_giwscan(struct net_device *dev,
     	iwe.u.qual.level = 0;
     	iwe.u.qual.noise = 0;
         set_quality(pAdapter, &iwe.u.qual, pAdapter->ScanTab.BssEntry[i].Rssi);
-    	current_ev = IWE_STREAM_ADD_EVENT(info, current_ev, end_buf, &iwe, IW_EV_QUAL_LEN);
+    	current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_QUAL_LEN);
         if (current_ev == previous_ev)
 #if WIRELESS_EXT >= 17
             return -E2BIG;
@@ -1271,7 +1320,7 @@ int rt_ioctl_giwscan(struct net_device *dev,
 			iwe.u.data.flags = IW_ENCODE_DISABLED;
 
         previous_ev = current_ev;
-        current_ev = IWE_STREAM_ADD_POINT(info, current_ev, end_buf,&iwe, (char *)pAdapter->SharedKey[BSS0][(iwe.u.data.flags & IW_ENCODE_INDEX)-1].Key);
+        current_ev = iwe_stream_add_point(info, current_ev, end_buf,&iwe, (char *)pAdapter->SharedKey[BSS0][(iwe.u.data.flags & IW_ENCODE_INDEX)-1].Key);
         if (current_ev == previous_ev)
 #if WIRELESS_EXT >= 17
             return -E2BIG;
@@ -1299,7 +1348,7 @@ int rt_ioctl_giwscan(struct net_device *dev,
     		    iwe.u.bitrate.value =  (tmpRate/2) * 1000000;
 
 			iwe.u.bitrate.disabled = 0;
-			current_val = IWE_STREAM_ADD_VALUE(info, current_ev,
+			current_val = iwe_stream_add_value(info, current_ev,
 				current_val, end_buf, &iwe,
     			IW_EV_PARAM_LEN);
 
@@ -1323,7 +1372,7 @@ int rt_ioctl_giwscan(struct net_device *dev,
 						   pAdapter->ScanTab.BssEntry[i].WpaIE.IELen);
 			iwe.cmd = IWEVGENIE;
 			iwe.u.data.length = pAdapter->ScanTab.BssEntry[i].WpaIE.IELen;
-			current_ev = IWE_STREAM_ADD_POINT(info, current_ev, end_buf, &iwe, custom);
+			current_ev = iwe_stream_add_point(info, current_ev, end_buf, &iwe, custom);
 			if (current_ev == previous_ev)
 #if WIRELESS_EXT >= 17
                 return -E2BIG;
@@ -1341,7 +1390,7 @@ int rt_ioctl_giwscan(struct net_device *dev,
 						   pAdapter->ScanTab.BssEntry[i].RsnIE.IELen);
 			iwe.cmd = IWEVGENIE;
 			iwe.u.data.length = pAdapter->ScanTab.BssEntry[i].RsnIE.IELen;
-			current_ev = IWE_STREAM_ADD_POINT(info, current_ev, end_buf, &iwe, custom);
+			current_ev = iwe_stream_add_point(info, current_ev, end_buf, &iwe, custom);
 			if (current_ev == previous_ev)
 #if WIRELESS_EXT >= 17
                 return -E2BIG;
@@ -1360,9 +1409,9 @@ int rt_ioctl_giwscan(struct net_device *dev,
             iwe.u.data.length = (pAdapter->ScanTab.BssEntry[i].WpaIE.IELen * 2) + 7;
             NdisMoveMemory(custom, "wpa_ie=", 7);
             for (idx = 0; idx < pAdapter->ScanTab.BssEntry[i].WpaIE.IELen; idx++)
-                sprintf(custom, "%s%02x", custom, pAdapter->ScanTab.BssEntry[i].WpaIE.IE[idx]);
+                sprintf(custom + strlen(custom), "%02x", pAdapter->ScanTab.BssEntry[i].WpaIE.IE[idx]);
             previous_ev = current_ev;
-    		current_ev = IWE_STREAM_ADD_POINT(info, current_ev, end_buf, &iwe,  custom);
+    		current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe,  custom);
             if (current_ev == previous_ev)
 #if WIRELESS_EXT >= 17
                 return -E2BIG;
@@ -1380,9 +1429,9 @@ int rt_ioctl_giwscan(struct net_device *dev,
             iwe.u.data.length = (pAdapter->ScanTab.BssEntry[i].RsnIE.IELen * 2) + 7;
             NdisMoveMemory(custom, "rsn_ie=", 7);
 			for (idx = 0; idx < pAdapter->ScanTab.BssEntry[i].RsnIE.IELen; idx++)
-                sprintf(custom, "%s%02x", custom, pAdapter->ScanTab.BssEntry[i].RsnIE.IE[idx]);
+                sprintf(custom + strlen(custom), "%02x", pAdapter->ScanTab.BssEntry[i].RsnIE.IE[idx]);
             previous_ev = current_ev;
-    		current_ev = IWE_STREAM_ADD_POINT(info, current_ev, end_buf, &iwe,  custom);
+    		current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe,  custom);
             if (current_ev == previous_ev)
 #if WIRELESS_EXT >= 17
                 return -E2BIG;
@@ -1445,6 +1494,7 @@ int rt_ioctl_giwessid(struct net_device *dev,
 			 struct iw_request_info *info,
 			 struct iw_point *data, char *essid)
 {
+#ifndef RT30xx
 	PRTMP_ADAPTER 	pAdapter = NULL;
 	VIRTUAL_ADAPTER *pVirtualAd = NULL;
 
@@ -1465,6 +1515,10 @@ int rt_ioctl_giwessid(struct net_device *dev,
 		   So the net_dev->ml_priv will be NULL in 2rd open */
 		return -ENETDOWN;
 	}
+#endif
+#ifdef RT30xx
+	PRTMP_ADAPTER pAdapter = dev->ml_priv;
+#endif
 
 	data->flags = 1;
     if (MONITOR_ON(pAdapter))
@@ -1479,6 +1533,14 @@ int rt_ioctl_giwessid(struct net_device *dev,
 		data->length = pAdapter->CommonCfg.SsidLen;
 		memcpy(essid, pAdapter->CommonCfg.Ssid, pAdapter->CommonCfg.SsidLen);
 	}
+#ifdef RT2870
+    // Add for RT2870
+    else if (pAdapter->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
+    {
+        data->length = pAdapter->CommonCfg.SsidLen;
+		memcpy(essid, pAdapter->CommonCfg.Ssid, pAdapter->CommonCfg.SsidLen);
+	}
+#endif // RT2870 //
 	else
 	{//the ANY ssid was specified
 		data->length  = 0;
@@ -1516,6 +1578,7 @@ int rt_ioctl_giwnickn(struct net_device *dev,
 			 struct iw_request_info *info,
 			 struct iw_point *data, char *nickname)
 {
+#ifndef RT30xx
 	PRTMP_ADAPTER 	pAdapter = NULL;
 	VIRTUAL_ADAPTER *pVirtualAd = NULL;
 
@@ -1536,6 +1599,10 @@ int rt_ioctl_giwnickn(struct net_device *dev,
 		   So the net_dev->ml_priv will be NULL in 2rd open */
 		return -ENETDOWN;
 	}
+#endif
+#ifdef RT30xx
+	PRTMP_ADAPTER pAdapter = dev->ml_priv;
+#endif
 
 	if (data->length > strlen(pAdapter->nickname) + 1)
 		data->length = strlen(pAdapter->nickname) + 1;
@@ -1579,6 +1646,7 @@ int rt_ioctl_giwrts(struct net_device *dev,
 		       struct iw_request_info *info,
 		       struct iw_param *rts, char *extra)
 {
+#ifndef RT30xx
 	PRTMP_ADAPTER 	pAdapter = NULL;
 	VIRTUAL_ADAPTER *pVirtualAd = NULL;
 
@@ -1599,6 +1667,10 @@ int rt_ioctl_giwrts(struct net_device *dev,
 		   So the net_dev->ml_priv will be NULL in 2rd open */
 		return -ENETDOWN;
 	}
+#endif
+#ifdef RT30xx
+	PRTMP_ADAPTER pAdapter = dev->ml_priv;
+#endif
 
 	//check if the interface is down
     	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
@@ -1645,6 +1717,7 @@ int rt_ioctl_giwfrag(struct net_device *dev,
 			struct iw_request_info *info,
 			struct iw_param *frag, char *extra)
 {
+#ifndef RT30xx
 	PRTMP_ADAPTER 	pAdapter = NULL;
 	VIRTUAL_ADAPTER *pVirtualAd = NULL;
 
@@ -1665,6 +1738,10 @@ int rt_ioctl_giwfrag(struct net_device *dev,
 		   So the net_dev->ml_priv will be NULL in 2rd open */
 		return -ENETDOWN;
 	}
+#endif
+#ifdef RT30xx
+	PRTMP_ADAPTER pAdapter = dev->ml_priv;
+#endif
 
 	//check if the interface is down
     	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
@@ -1705,8 +1782,13 @@ int rt_ioctl_siwencode(struct net_device *dev,
         pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
         goto done;
 	}
+#ifndef RT30xx
 	else if ((erq->length == 0) &&
              (erq->flags & IW_ENCODE_RESTRICTED || erq->flags & IW_ENCODE_OPEN))
+#endif
+#ifdef RT30xx
+	else if (erq->flags & IW_ENCODE_RESTRICTED || erq->flags & IW_ENCODE_OPEN)
+#endif
 	{
 		STA_PORT_SECURED(pAdapter);
 		pAdapter->StaCfg.PairCipher = Ndis802_11WEPEnabled;
@@ -1717,7 +1799,9 @@ int rt_ioctl_siwencode(struct net_device *dev,
 			pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeShared;
     	else
 			pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
+#ifndef RT30xx
         goto done;
+#endif
 	}
 
     if (erq->length > 0)
@@ -1736,6 +1820,12 @@ int rt_ioctl_siwencode(struct net_device *dev,
             //Using default key
 			keyIdx = pAdapter->StaCfg.DefaultKeyId;
         }
+#ifdef RT30xx
+		else
+		{
+			pAdapter->StaCfg.DefaultKeyId=keyIdx;
+		}
+#endif
 
         NdisZeroMemory(pAdapter->SharedKey[BSS0][keyIdx].Key,  16);
 
@@ -1787,7 +1877,11 @@ rt_ioctl_giwencode(struct net_device *dev,
 			  struct iw_request_info *info,
 			  struct iw_point *erq, char *key)
 {
+#ifdef RT30xx
+	PRTMP_ADAPTER pAdapter = dev->ml_priv;
+#endif
 	int kid;
+#ifndef RT30xx
 	PRTMP_ADAPTER 	pAdapter = NULL;
 	VIRTUAL_ADAPTER *pVirtualAd = NULL;
 
@@ -1808,6 +1902,7 @@ rt_ioctl_giwencode(struct net_device *dev,
 		   So the net_dev->ml_priv will be NULL in 2rd open */
 		return -ENETDOWN;
 	}
+#endif
 
 	//check if the interface is down
 	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
@@ -1952,14 +2047,6 @@ rt_private_get_statistics(struct net_device *dev, struct iw_request_info *info,
     memset(extra, 0x00, IW_PRIV_SIZE_MASK);
     sprintf(extra, "\n\n");
 
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-	{
-	    sprintf(extra+strlen(extra), "Tx success                      = %ld\n", (ULONG)pAd->ate.TxDoneCount);
-	    //sprintf(extra+strlen(extra), "Tx success without retry        = %ld\n", (ULONG)pAd->ate.TxDoneCount);
-	}
-	else
-#endif // RALINK_ATE //
 	{
     sprintf(extra+strlen(extra), "Tx success                      = %ld\n", (ULONG)pAd->WlanCounters.TransmittedFragmentCount.QuadPart);
     sprintf(extra+strlen(extra), "Tx success without retry        = %ld\n", (ULONG)pAd->WlanCounters.TransmittedFragmentCount.QuadPart - (ULONG)pAd->WlanCounters.RetryCount.QuadPart);
@@ -1975,31 +2062,12 @@ rt_private_get_statistics(struct net_device *dev, struct iw_request_info *info,
     sprintf(extra+strlen(extra), "Rx duplicate frame              = %ld\n", (ULONG)pAd->WlanCounters.FrameDuplicateCount.QuadPart);
 
     sprintf(extra+strlen(extra), "False CCA (one second)          = %ld\n", (ULONG)pAd->RalinkCounters.OneSecFalseCCACnt);
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-	{
-		if (pAd->ate.RxAntennaSel == 0)
-		{
-    		sprintf(extra+strlen(extra), "RSSI-A                          = %ld\n", (LONG)(pAd->ate.LastRssi0 - pAd->BbpRssiToDbmDelta));
-			sprintf(extra+strlen(extra), "RSSI-B (if available)           = %ld\n", (LONG)(pAd->ate.LastRssi1 - pAd->BbpRssiToDbmDelta));
-			sprintf(extra+strlen(extra), "RSSI-C (if available)           = %ld\n\n", (LONG)(pAd->ate.LastRssi2 - pAd->BbpRssiToDbmDelta));
-		}
-		else
-		{
-    		sprintf(extra+strlen(extra), "RSSI                            = %ld\n", (LONG)(pAd->ate.LastRssi0 - pAd->BbpRssiToDbmDelta));
-		}
-	}
-	else
-#endif // RALINK_ATE //
 	{
     	sprintf(extra+strlen(extra), "RSSI-A                          = %ld\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi0 - pAd->BbpRssiToDbmDelta));
         sprintf(extra+strlen(extra), "RSSI-B (if available)           = %ld\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi1 - pAd->BbpRssiToDbmDelta));
         sprintf(extra+strlen(extra), "RSSI-C (if available)           = %ld\n\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi2 - pAd->BbpRssiToDbmDelta));
 	}
-#ifdef WPA_SUPPLICANT_SUPPORT
     sprintf(extra+strlen(extra), "WpaSupplicantUP                 = %d\n\n", pAd->StaCfg.WpaSupplicantUP);
-#endif // WPA_SUPPLICANT_SUPPORT //
-
 
     wrq->length = strlen(extra) + 1; // 1: size of '\0'
     DBGPRINT(RT_DEBUG_TRACE, ("<== rt_private_get_statistics, wrq->length = %d\n", wrq->length));
@@ -2007,7 +2075,6 @@ rt_private_get_statistics(struct net_device *dev, struct iw_request_info *info,
     return Status;
 }
 
-#ifdef DOT11_N_SUPPORT
 void	getBaInfo(
 	IN	PRTMP_ADAPTER	pAd,
 	IN	PUCHAR			pOutBuf)
@@ -2022,8 +2089,7 @@ void	getBaInfo(
 		if (((pEntry->ValidAsCLI || pEntry->ValidAsApCli) && (pEntry->Sst == SST_ASSOC))
 			|| (pEntry->ValidAsWDS) || (pEntry->ValidAsMesh))
 		{
-			sprintf(pOutBuf, "%s\n%02X:%02X:%02X:%02X:%02X:%02X (Aid = %d) (AP) -\n",
-                pOutBuf,
+			sprintf(pOutBuf + strlen(pOutBuf), "\n%02X:%02X:%02X:%02X:%02X:%02X (Aid = %d) (AP) -\n",
 				pEntry->Addr[0], pEntry->Addr[1], pEntry->Addr[2],
 				pEntry->Addr[3], pEntry->Addr[4], pEntry->Addr[5], pEntry->Aid);
 
@@ -2033,7 +2099,7 @@ void	getBaInfo(
 				if (pEntry->BARecWcidArray[j] != 0)
 				{
 					pRecBAEntry =&pAd->BATable.BARecEntry[pEntry->BARecWcidArray[j]];
-					sprintf(pOutBuf, "%sTID=%d, BAWinSize=%d, LastIndSeq=%d, ReorderingPkts=%d\n", pOutBuf, j, pRecBAEntry->BAWinSize, pRecBAEntry->LastIndSeq, pRecBAEntry->list.qlen);
+					sprintf(pOutBuf + strlen(pOutBuf), "TID=%d, BAWinSize=%d, LastIndSeq=%d, ReorderingPkts=%d\n", j, pRecBAEntry->BAWinSize, pRecBAEntry->LastIndSeq, pRecBAEntry->list.qlen);
 				}
 			}
 			sprintf(pOutBuf, "%s\n", pOutBuf);
@@ -2044,7 +2110,7 @@ void	getBaInfo(
 				if (pEntry->BAOriWcidArray[j] != 0)
 				{
 					pOriBAEntry =&pAd->BATable.BAOriEntry[pEntry->BAOriWcidArray[j]];
-					sprintf(pOutBuf, "%sTID=%d, BAWinSize=%d, StartSeq=%d, CurTxSeq=%d\n", pOutBuf, j, pOriBAEntry->BAWinSize, pOriBAEntry->Sequence, pEntry->TxSeq[j]);
+					sprintf(pOutBuf + strlen(pOutBuf), "TID=%d, BAWinSize=%d, StartSeq=%d, CurTxSeq=%d\n", j, pOriBAEntry->BAWinSize, pOriBAEntry->Sequence, pEntry->TxSeq[j]);
 				}
 			}
 			sprintf(pOutBuf, "%s\n\n", pOutBuf);
@@ -2055,7 +2121,6 @@ void	getBaInfo(
 
 	return;
 }
-#endif // DOT11_N_SUPPORT //
 
 static int
 rt_private_show(struct net_device *dev, struct iw_request_info *info,
@@ -2101,12 +2166,10 @@ rt_private_show(struct net_device *dev, struct iw_request_info *info,
         case SHOW_CONN_STATUS:
             if (MONITOR_ON(pAd))
             {
-#ifdef DOT11_N_SUPPORT
                 if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED &&
                     pAd->CommonCfg.RegTransmitSetting.field.BW)
                     sprintf(extra, "Monitor Mode(CentralChannel %d)\n", pAd->CommonCfg.CentralChannel);
                 else
-#endif // DOT11_N_SUPPORT //
                     sprintf(extra, "Monitor Mode(Channel %d)\n", pAd->CommonCfg.Channel);
             }
             else
@@ -2140,12 +2203,10 @@ rt_private_show(struct net_device *dev, struct iw_request_info *info,
             sprintf(extra, "Driver version-%s, %s %s\n", STA_DRIVER_VERSION, __DATE__, __TIME__ );
             wrq->length = strlen(extra) + 1; // 1: size of '\0'
             break;
-#ifdef DOT11_N_SUPPORT
         case SHOW_BA_INFO:
             getBaInfo(pAd, extra);
             wrq->length = strlen(extra) + 1; // 1: size of '\0'
             break;
-#endif // DOT11_N_SUPPORT //
 		case SHOW_DESC_INFO:
 			{
 				Show_DescInfo_Proc(pAd, NULL);
@@ -2174,6 +2235,14 @@ rt_private_show(struct net_device *dev, struct iw_request_info *info,
             wrq->length = strlen(extra) + 1; // 1: size of '\0'
             break;
         case RAIO_ON:
+#ifdef RT2870
+            if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
+            {
+                sprintf(extra, "Scanning\n");
+                wrq->length = strlen(extra) + 1; // 1: size of '\0'
+                break;
+            }
+#endif
             pAd->StaCfg.bSwRadio = TRUE;
             //if (pAd->StaCfg.bRadio != (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio))
             {
@@ -2189,16 +2258,6 @@ rt_private_show(struct net_device *dev, struct iw_request_info *info,
             wrq->length = strlen(extra) + 1; // 1: size of '\0'
             break;
 
-
-#ifdef QOS_DLS_SUPPORT
-		case SHOW_DLS_ENTRY_INFO:
-			{
-				Set_DlsEntryInfo_Display_Proc(pAd, NULL);
-				wrq->length = 0; // 1: size of '\0'
-			}
-			break;
-#endif // QOS_DLS_SUPPORT //
-
 		case SHOW_CFG_VALUE:
 			{
 				Status = RTMPShowCfgValue(pAd, wrq->pointer, extra);
@@ -2206,6 +2265,12 @@ rt_private_show(struct net_device *dev, struct iw_request_info *info,
 					wrq->length = strlen(extra) + 1; // 1: size of '\0'
 			}
 			break;
+#if !defined(RT2860) && !defined(RT30xx)
+		case SHOW_ADHOC_ENTRY_INFO:
+			Show_Adhoc_MacTable_Proc(pAd, extra);
+			wrq->length = strlen(extra) + 1; // 1: size of '\0'
+			break;
+#endif
         default:
             DBGPRINT(RT_DEBUG_TRACE, ("%s - unknow subcmd = %d\n", __func__, subcmd));
             break;
@@ -2312,9 +2377,7 @@ int rt_ioctl_siwauth(struct net_device *dev,
                 pAdapter->StaCfg.WepStatus = Ndis802_11WEPEnabled;
                 pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
                 pAdapter->StaCfg.PairCipher = Ndis802_11WEPEnabled;
-#ifdef WPA_SUPPLICANT_SUPPORT
                 pAdapter->StaCfg.IEEE8021X = FALSE;
-#endif // WPA_SUPPLICANT_SUPPORT //
             }
             else if (param->value == IW_AUTH_CIPHER_TKIP)
             {
@@ -2356,22 +2419,16 @@ int rt_ioctl_siwauth(struct net_device *dev,
                 if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK)
                 {
                     pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA;
-#ifdef WPA_SUPPLICANT_SUPPORT
                     pAdapter->StaCfg.IEEE8021X = FALSE;
-#endif // WPA_SUPPLICANT_SUPPORT //
                 }
                 else if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)
                 {
                     pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2;
-#ifdef WPA_SUPPLICANT_SUPPORT
                     pAdapter->StaCfg.IEEE8021X = FALSE;
-#endif // WPA_SUPPLICANT_SUPPORT //
                 }
-#ifdef WPA_SUPPLICANT_SUPPORT
                 else
                     // WEP 1x
                     pAdapter->StaCfg.IEEE8021X = TRUE;
-#endif // WPA_SUPPLICANT_SUPPORT //
             }
             else if (param->value == 0)
             {
@@ -2457,6 +2514,7 @@ void fnSetCipherKey(
     IN  BOOLEAN         bGTK,
     IN  struct iw_encode_ext *ext)
 {
+#ifdef RT2860
 	RTMP_CLEAR_PSFLAG(pAdapter, fRTMP_PS_CAN_GO_SLEEP);
 	if (RTMP_TEST_PSFLAG(pAdapter, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND))
 	{
@@ -2470,7 +2528,7 @@ void fnSetCipherKey(
 		RTMPusecDelay(6000);
 		pAdapter->bPCIclkOff = FALSE;
 	}
-
+#endif
     NdisZeroMemory(&pAdapter->SharedKey[BSS0][keyIdx], sizeof(CIPHER_KEY));
     pAdapter->SharedKey[BSS0][keyIdx].KeyLen = LEN_TKIP_EK;
     NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, ext->key, LEN_TKIP_EK);
@@ -2501,8 +2559,9 @@ void fnSetCipherKey(
     							  keyIdx,
     							  pAdapter->SharedKey[BSS0][keyIdx].CipherAlg,
     							  &pAdapter->MacTab.Content[BSSID_WCID]);
-
+#ifdef RT2860
 	RTMP_SET_PSFLAG(pAdapter, fRTMP_PS_CAN_GO_SLEEP);
+#endif
 }
 
 int rt_ioctl_siwencodeext(struct net_device *dev,
@@ -2567,7 +2626,7 @@ int rt_ioctl_siwencodeext(struct net_device *dev,
 
                 NdisZeroMemory(pAdapter->SharedKey[BSS0][keyIdx].Key,  16);
 			    NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, ext->key, ext->key_len);
-
+#ifndef RT30xx
 				if (pAdapter->StaCfg.GroupCipher == Ndis802_11GroupWEP40Enabled ||
 					pAdapter->StaCfg.GroupCipher == Ndis802_11GroupWEP104Enabled)
 				{
@@ -2582,6 +2641,7 @@ int rt_ioctl_siwencodeext(struct net_device *dev,
     				// Indicate Connected for GUI
     				pAdapter->IndicateMediaState = NdisMediaStateConnected;
 				}
+#endif
     			break;
             case IW_ENCODE_ALG_TKIP:
                 DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_ENCODE_ALG_TKIP - keyIdx = %d, ext->key_len = %d\n", __func__, keyIdx, ext->key_len));
@@ -2752,7 +2812,6 @@ int rt_ioctl_giwgenie(struct net_device *dev,
 		return 0;
 	}
 
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
 #ifdef SIOCSIWGENIE
 	if (pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE)
 	{
@@ -2764,7 +2823,6 @@ int rt_ioctl_giwgenie(struct net_device *dev,
 	}
 	else
 #endif // SIOCSIWGENIE //
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
 	{
 		UCHAR RSNIe = IE_WPA;
 
@@ -2895,15 +2953,13 @@ rt_private_ioctl_bbp(struct net_device *dev, struct iw_request_info *info,
 			DBGPRINT(RT_DEBUG_TRACE, ("this_char=%s, value=%s\n", this_char, value));
 			if (sscanf(this_char, "%d", &(bbpId)) == 1)
 			{
+#ifndef RT30xx
 				if (bbpId <= 136)
+#endif // RT30xx //
+#ifdef RT30xx
+				if (bbpId <= 138)  // edit by johnli, RF power sequence setup, add BBP R138 for ADC dynamic on/off control
+#endif // RT30xx //
 				{
-#ifdef RALINK_ATE
-					if (ATE_ON(pAdapter))
-					{
-						ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-					}
-					else
-#endif // RALINK_ATE //
 					{
 					RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
 					}
@@ -2927,17 +2983,13 @@ rt_private_ioctl_bbp(struct net_device *dev, struct iw_request_info *info,
 		{ //Write
 			if ((sscanf(this_char, "%d", &(bbpId)) == 1) && (sscanf(value, "%x", &(bbpValue)) == 1))
 			{
+#ifndef RT30xx
 				if (bbpId <= 136)
+#endif // RT30xx //
+#ifdef RT30xx
+				if (bbpId <= 138)  // edit by johnli, RF power sequence setup, add BBP R138 for ADC dynamic on/off control
+#endif // RT30xx //
 				{
-#ifdef RALINK_ATE
-					if (ATE_ON(pAdapter))
-					{
-						ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, bbpId, bbpValue);
-						//Read it back for showing
-						ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-					}
-					else
-#endif // RALINK_ATE //
 					{
 					    RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, bbpId, bbpValue);
     					//Read it back for showing
@@ -2968,21 +3020,24 @@ next:
 	{
 		memset(extra, 0x00, IW_PRIV_SIZE_MASK);
 		sprintf(extra, "\n");
+#ifndef RT30xx
 		for (bbpId = 0; bbpId <= 136; bbpId++)
+#endif // RT30xx //
+#ifdef RT30xx
+		for (bbpId = 0; bbpId <= 138; bbpId++)  // edit by johnli, RF power sequence setup, add BBP R138 for ADC dynamic on/off control
+#endif // RT30xx //
 		{
 		    if (strlen(extra) >= (IW_PRIV_SIZE_MASK - 10))
                 break;
-#ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-			}
-			else
-#endif // RALINK_ATE //
 			RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
+#ifndef RT30xx
 			sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X    ", bbpId, bbpId*2, regBBP);
 			if (bbpId%5 == 4)
 				sprintf(extra+strlen(extra), "\n");
+#endif
+#ifdef RT30xx
+			sprintf(extra+strlen(extra), "%03d = %02X\n", bbpId, regBBP);  // edit by johnli, change display format
+#endif
 		}
 
         wrq->length = strlen(extra) + 1; // 1: size of '\0'
@@ -3022,9 +3077,7 @@ int rt_ioctl_siwrate(struct net_device *dev,
 		    (pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE <= MODE_OFDM))
 			RTMPSetDesiredRates(pAd, -1);
 
-#ifdef DOT11_N_SUPPORT
 		SetCommonHT(pAd);
-#endif // DOT11_N_SUPPORT //
     }
     else
     {
@@ -3037,9 +3090,7 @@ int rt_ioctl_siwrate(struct net_device *dev,
             else
             {
                 pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
-#ifdef DOT11_N_SUPPORT
                 SetCommonHT(pAd);
-#endif // DOT11_N_SUPPORT //
             }
             DBGPRINT(RT_DEBUG_TRACE, ("rt_ioctl_siwrate::(HtMcs=%d)\n",pAd->StaCfg.DesiredTransmitSetting.field.MCS));
         }
@@ -3087,13 +3138,11 @@ int rt_ioctl_giwrate(struct net_device *dev,
     else
         ht_setting.word = pAd->MacTab.Content[BSSID_WCID].HTPhyMode.word;
 
-#ifdef DOT11_N_SUPPORT
     if (ht_setting.field.MODE >= MODE_HTMIX)
     {
     	rate_index = 12 + ((UCHAR)ht_setting.field.BW *24) + ((UCHAR)ht_setting.field.ShortGI *48) + ((UCHAR)ht_setting.field.MCS);
     }
     else
-#endif // DOT11_N_SUPPORT //
     if (ht_setting.field.MODE == MODE_OFDM)
     	rate_index = (UCHAR)(ht_setting.field.MCS) + 4;
     else if (ht_setting.field.MODE == MODE_CCK)
@@ -3184,11 +3233,7 @@ static const iw_handler rt_handler[] =
 static const iw_handler rt_priv_handlers[] = {
 	(iw_handler) NULL, /* + 0x00 */
 	(iw_handler) NULL, /* + 0x01 */
-#ifndef CONFIG_AP_SUPPORT
 	(iw_handler) rt_ioctl_setparam, /* + 0x02 */
-#else
-	(iw_handler) NULL, /* + 0x02 */
-#endif // CONFIG_AP_SUPPORT //
 #ifdef DBG
 	(iw_handler) rt_private_ioctl_bbp, /* + 0x03 */
 #else
@@ -3258,27 +3303,13 @@ INT RTMPSetInformation(
     ULONG                               PowerTemp;
     BOOLEAN                             RadioState;
     BOOLEAN                             StateMachineTouched = FALSE;
-#ifdef DOT11_N_SUPPORT
 	OID_SET_HT_PHYMODE					HT_PhyMode;	//11n ,kathy
-#endif // DOT11_N_SUPPORT //
-#ifdef WPA_SUPPLICANT_SUPPORT
     PNDIS_802_11_PMKID                  pPmkId = NULL;
     BOOLEAN				                IEEE8021xState = FALSE;
     BOOLEAN				                IEEE8021x_required_keys = FALSE;
     UCHAR                               wpa_supplicant_enable = 0;
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef SNMP_SUPPORT
-	TX_RTY_CFG_STRUC			tx_rty_cfg;
-	ULONG						ShortRetryLimit, LongRetryLimit;
-	UCHAR						ctmp;
-#endif // SNMP_SUPPORT //
-
 
-#ifdef DOT11_N_SUPPORT
 	MaxPhyMode = PHY_11N_5G;
-#endif // DOT11_N_SUPPORT //
-
 
 	DBGPRINT(RT_DEBUG_TRACE, ("-->RTMPSetInformation(),	0x%08x\n", cmd&0x7FFF));
     switch(cmd & 0x7FFF) {
@@ -3298,21 +3329,12 @@ INT RTMPSetInformation(
 				pAdapter->CommonCfg.PhyMode = 0xff;
 				// Build all corresponding channel information
 				RTMPSetPhyMode(pAdapter, TmpPhy);
-#ifdef DOT11_N_SUPPORT
 				SetCommonHT(pAdapter);
-#endif // DOT11_N_SUPPORT //
 				DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_COUNTRY_REGION (A:%d  B/G:%d)\n", pAdapter->CommonCfg.CountryRegionForABand,
 				    pAdapter->CommonCfg.CountryRegion));
             }
             break;
         case OID_802_11_BSSID_LIST_SCAN:
- #ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				break;
-			}
-#endif // RALINK_ATE //
             Now = jiffies;
 			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_BSSID_LIST_SCAN, TxCnt = %d \n", pAdapter->RalinkCounters.LastOneSecTotalTxCount));
 
@@ -3414,13 +3436,6 @@ INT RTMPSetInformation(
             }
             break;
         case OID_802_11_BSSID:
-#ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				break;
-			}
-#endif // RALINK_ATE //
             if (wrq->u.data.length != sizeof(NDIS_802_11_MAC_ADDRESS))
                 Status  = -EINVAL;
             else
@@ -3492,9 +3507,7 @@ INT RTMPSetInformation(
 				if (PhyMode <= MaxPhyMode)
 				{
                 	RTMPSetPhyMode(pAdapter, PhyMode);
-#ifdef DOT11_N_SUPPORT
 					SetCommonHT(pAdapter);
-#endif // DOT11_N_SUPPORT //
 				}
                 DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_PHY_MODE (=%d)\n", PhyMode));
             }
@@ -3513,9 +3526,14 @@ INT RTMPSetInformation(
                 {
                     // allow dynamic change of "USE OFDM rate or not" in ADHOC mode
                     // if setting changed, need to reset current TX rate as well as BEACON frame format
+#ifdef RT30xx
+                    pAdapter->CommonCfg.PhyMode = StaConfig.AdhocMode;
+#endif
                     if (pAdapter->StaCfg.BssType == BSS_ADHOC)
                     {
+#ifndef RT30xx
 						pAdapter->CommonCfg.PhyMode = StaConfig.AdhocMode;
+#endif
                     	RTMPSetPhyMode(pAdapter, PhyMode);
                         MlmeUpdateTxRates(pAdapter, FALSE, 0);
                         MakeIbssBeacon(pAdapter);           // re-build BEACON frame
@@ -3679,6 +3697,15 @@ INT RTMPSetInformation(
             pAdapter->Counters8023.RxNoBuffer   = 0;
 			pAdapter->Counters8023.GoodReceives = 0;
 			pAdapter->Counters8023.RxNoBuffer   = 0;
+#ifdef RT2870
+			pAdapter->BulkOutComplete	= 0;
+			pAdapter->BulkOutCompleteOther= 0;
+			pAdapter->BulkOutCompleteCancel = 0;
+			pAdapter->BulkOutReq = 0;
+			pAdapter->BulkInReq= 0;
+			pAdapter->BulkInComplete = 0;
+			pAdapter->BulkInCompleteFail = 0;
+#endif // RT2870 //
             DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_RESET_COUNTERS \n"));
             break;
         case OID_802_11_RTS_THRESHOLD:
@@ -3763,10 +3790,10 @@ INT RTMPSetInformation(
 					RTMPSetPhyMode(pAdapter, PHY_11A);
 				else
 					Status = -EINVAL;
-#ifdef DOT11_N_SUPPORT
+
 				if (Status == NDIS_STATUS_SUCCESS)
 					SetCommonHT(pAdapter);
-#endif // DOT11_N_SUPPORT //
+
                 DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_NETWORK_TYPE_IN_USE (=%d)\n",NetType));
 		    }
 			break;
@@ -3910,7 +3937,6 @@ INT RTMPSetInformation(
                 pAdapter->bConfigChanged = TRUE;
             }
             break;
-#ifdef DOT11_N_SUPPORT
 		case RT_OID_802_11_SET_HT_PHYMODE:
 			if (wrq->u.data.length	!= sizeof(OID_SET_HT_PHYMODE))
 				Status = -EINVAL;
@@ -3929,7 +3955,6 @@ INT RTMPSetInformation(
 				pAdapter->StaCfg.HTPhyMode.field.MCS, pAdapter->StaCfg.HTPhyMode.field.BW, pAdapter->StaCfg.HTPhyMode.field.ShortGI,
 				pAdapter->StaCfg.HTPhyMode.field.STBC));
 			break;
-#endif // DOT11_N_SUPPORT //
 		case RT_OID_802_11_SET_APSD_SETTING:
 			if (wrq->u.data.length != sizeof(ULONG))
 				Status = -EINVAL;
@@ -3970,62 +3995,7 @@ INT RTMPSetInformation(
 				DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_APSD_PSM (bAPSDForcePowerSave:%d)\n",	pAdapter->CommonCfg.bAPSDForcePowerSave));
 			}
 			break;
-#ifdef QOS_DLS_SUPPORT
-		case RT_OID_802_11_SET_DLS:
-			if (wrq->u.data.length != sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				BOOLEAN	oldvalue = pAdapter->CommonCfg.bDLSCapable;
-				Status = copy_from_user(&pAdapter->CommonCfg.bDLSCapable, wrq->u.data.pointer, wrq->u.data.length);
-				if (oldvalue &&	!pAdapter->CommonCfg.bDLSCapable)
-				{
-					int	i;
-					// tear	down local dls table entry
-					for	(i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-					{
-						if (pAdapter->StaCfg.DLSEntry[i].Valid && (pAdapter->StaCfg.DLSEntry[i].Status == DLS_FINISH))
-						{
-							pAdapter->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-							pAdapter->StaCfg.DLSEntry[i].Valid	= FALSE;
-							RTMPSendDLSTearDownFrame(pAdapter, pAdapter->StaCfg.DLSEntry[i].MacAddr);
-						}
-					}
 
-					// tear	down peer dls table	entry
-					for	(i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
-					{
-						if (pAdapter->StaCfg.DLSEntry[i].Valid && (pAdapter->StaCfg.DLSEntry[i].Status == DLS_FINISH))
-						{
-							pAdapter->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-							pAdapter->StaCfg.DLSEntry[i].Valid	= FALSE;
-							RTMPSendDLSTearDownFrame(pAdapter, pAdapter->StaCfg.DLSEntry[i].MacAddr);
-						}
-					}
-				}
-
-				DBGPRINT(RT_DEBUG_TRACE,("Set::RT_OID_802_11_SET_DLS (=%d)\n", pAdapter->CommonCfg.bDLSCapable));
-			}
-			break;
-
-		case RT_OID_802_11_SET_DLS_PARAM:
-			if (wrq->u.data.length	!= sizeof(RT_802_11_DLS_UI))
-				Status = -EINVAL;
-			else
-			{
-				RT_802_11_DLS	Dls;
-
-				NdisZeroMemory(&Dls, sizeof(RT_802_11_DLS));
-				RTMPMoveMemory(&Dls, wrq->u.data.pointer, sizeof(RT_802_11_DLS_UI));
-				MlmeEnqueue(pAdapter,
-							MLME_CNTL_STATE_MACHINE,
-							RT_OID_802_11_SET_DLS_PARAM,
-							sizeof(RT_802_11_DLS),
-							&Dls);
-				DBGPRINT(RT_DEBUG_TRACE,("Set::RT_OID_802_11_SET_DLS_PARAM \n"));
-			}
-			break;
-#endif // QOS_DLS_SUPPORT //
 		case RT_OID_802_11_SET_WMM:
 			if (wrq->u.data.length	!= sizeof(BOOLEAN))
 				Status = -EINVAL;
@@ -4037,13 +4007,6 @@ INT RTMPSetInformation(
 			break;
 
 		case OID_802_11_DISASSOCIATE:
-#ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				break;
-			}
-#endif // RALINK_ATE //
 			//
 			// Set NdisRadioStateOff to	TRUE, instead of called	MlmeRadioOff.
 			// Later on, NDIS_802_11_BSSID_LIST_EX->NumberOfItems should be	0
@@ -4074,8 +4037,6 @@ INT RTMPSetInformation(
 				StateMachineTouched	= TRUE;
 			}
 			break;
-
-#ifdef DOT11_N_SUPPORT
 		case RT_OID_802_11_SET_IMME_BA_CAP:
 				if (wrq->u.data.length != sizeof(OID_BACAP_STRUC))
 					Status = -EINVAL;
@@ -4230,8 +4191,6 @@ INT RTMPSetInformation(
 				}
             }
             break;
-#endif // DOT11_N_SUPPORT //
-
         // For WPA_SUPPLICANT to set static wep key
     	case OID_802_11_ADD_WEP:
     	    pWepKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
@@ -4285,19 +4244,21 @@ INT RTMPSetInformation(
                     // Default key for tx (shared key)
                     if (pWepKey->KeyIndex & 0x80000000)
                     {
-#ifdef WPA_SUPPLICANT_SUPPORT
                         // set key material and key length
                         NdisZeroMemory(pAdapter->StaCfg.DesireSharedKey[KeyIdx].Key, 16);
                         pAdapter->StaCfg.DesireSharedKey[KeyIdx].KeyLen = (UCHAR) pWepKey->KeyLength;
                         NdisMoveMemory(pAdapter->StaCfg.DesireSharedKey[KeyIdx].Key, &pWepKey->KeyMaterial, pWepKey->KeyLength);
                         pAdapter->StaCfg.DesireSharedKeyId = KeyIdx;
                         pAdapter->StaCfg.DesireSharedKey[KeyIdx].CipherAlg = CipherAlg;
-#endif // WPA_SUPPLICANT_SUPPORT //
                         pAdapter->StaCfg.DefaultKeyId = (UCHAR) KeyIdx;
                     }
-
-#ifdef WPA_SUPPLICANT_SUPPORT
+#ifndef RT30xx
+#ifdef RT2860
 					if ((pAdapter->StaCfg.WpaSupplicantUP != 0) &&
+#endif
+#ifdef RT2870
+					if ((pAdapter->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE) &&
+#endif
 						(pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA))
 					{
 						Key = pWepKey->KeyMaterial;
@@ -4314,7 +4275,10 @@ INT RTMPSetInformation(
         				pAdapter->IndicateMediaState = NdisMediaStateConnected;
 					}
                     else if (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED)
-#endif // WPA_SUPPLICANT_SUPPORT
+#endif
+#ifdef RT30xx
+                    if (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED)
+#endif
                     {
                         Key = pAdapter->SharedKey[BSS0][KeyIdx].Key;
 
@@ -4335,7 +4299,6 @@ INT RTMPSetInformation(
             }
             kfree(pWepKey);
             break;
-#ifdef WPA_SUPPLICANT_SUPPORT
 	    case OID_SET_COUNTERMEASURES:
             if (wrq->u.data.length != sizeof(int))
                 Status  = -EINVAL;
@@ -4469,95 +4432,6 @@ INT RTMPSetInformation(
 			if(pPmkId)
 				kfree(pPmkId);
 	        break;
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-
-
-#ifdef SNMP_SUPPORT
-		case OID_802_11_SHORTRETRYLIMIT:
-			if (wrq->u.data.length != sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&ShortRetryLimit, wrq->u.data.pointer, wrq->u.data.length);
-				RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
-				tx_rty_cfg.field.ShortRtyLimit = ShortRetryLimit;
-				RTMP_IO_WRITE32(pAdapter, TX_RTY_CFG, tx_rty_cfg.word);
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_SHORTRETRYLIMIT (tx_rty_cfg.field.ShortRetryLimit=%d, ShortRetryLimit=%ld)\n", tx_rty_cfg.field.ShortRtyLimit, ShortRetryLimit));
-			}
-			break;
-
-		case OID_802_11_LONGRETRYLIMIT:
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_LONGRETRYLIMIT \n"));
-			if (wrq->u.data.length != sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&LongRetryLimit, wrq->u.data.pointer, wrq->u.data.length);
-				RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
-				tx_rty_cfg.field.LongRtyLimit = LongRetryLimit;
-				RTMP_IO_WRITE32(pAdapter, TX_RTY_CFG, tx_rty_cfg.word);
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_LONGRETRYLIMIT (tx_rty_cfg.field.LongRetryLimit= %d,LongRetryLimit=%ld)\n", tx_rty_cfg.field.LongRtyLimit, LongRetryLimit));
-			}
-			break;
-
-		case OID_802_11_WEPDEFAULTKEYVALUE:
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_WEPDEFAULTKEYVALUE\n"));
-			pKey = kmalloc(wrq->u.data.length, GFP_KERNEL);
-			Status = copy_from_user(pKey, wrq->u.data.pointer, wrq->u.data.length);
-			//pKey = &WepKey;
-
-			if ( pKey->Length != wrq->u.data.length)
-			{
-				Status = -EINVAL;
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_WEPDEFAULTKEYVALUE, Failed!!\n"));
-			}
-			KeyIdx = pKey->KeyIndex & 0x0fffffff;
-			DBGPRINT(RT_DEBUG_TRACE,("pKey->KeyIndex =%d, pKey->KeyLength=%d\n", pKey->KeyIndex, pKey->KeyLength));
-
-			// it is a shared key
-			if (KeyIdx > 4)
-				Status = -EINVAL;
-			else
-			{
-				pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen = (UCHAR) pKey->KeyLength;
-				NdisMoveMemory(&pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].Key, &pKey->KeyMaterial, pKey->KeyLength);
-				if (pKey->KeyIndex & 0x80000000)
-				{
-					// Default key for tx (shared key)
-					pAdapter->StaCfg.DefaultKeyId = (UCHAR) KeyIdx;
-				}
-				//RestartAPIsRequired = TRUE;
-			}
-			break;
-
-
-		case OID_802_11_WEPDEFAULTKEYID:
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_WEPDEFAULTKEYID \n"));
-
-			if (wrq->u.data.length != sizeof(UCHAR))
-				Status = -EINVAL;
-			else
-				Status = copy_from_user(&pAdapter->StaCfg.DefaultKeyId, wrq->u.data.pointer, wrq->u.data.length);
-
-			break;
-
-
-		case OID_802_11_CURRENTCHANNEL:
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_CURRENTCHANNEL \n"));
-			if (wrq->u.data.length != sizeof(UCHAR))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&ctmp, wrq->u.data.pointer, wrq->u.data.length);
-				sprintf(&ctmp,"%d", ctmp);
-				Set_Channel_Proc(pAdapter, &ctmp);
-			}
-			break;
-#endif
-
-
-
         default:
             DBGPRINT(RT_DEBUG_TRACE, ("Set::unknown IOCTL's subcmd = 0x%08x\n", cmd));
             Status = -EOPNOTSUPP;
@@ -4599,16 +4473,6 @@ INT RTMPQueryInformation(
 	UCHAR	driverVersion[8];
     OID_SET_HT_PHYMODE			        *pHTPhyMode = NULL;
 
-
-#ifdef SNMP_SUPPORT
-	//for snmp, kathy
-	DefaultKeyIdxValue			*pKeyIdxValue;
-	INT							valueLen;
-	TX_RTY_CFG_STRUC			tx_rty_cfg;
-	ULONG						ShortRetryLimit, LongRetryLimit;
-	UCHAR						tmp[64];
-#endif //SNMP
-
     switch(cmd)
     {
         case RT_OID_DEVICE_NAME:
@@ -4625,16 +4489,6 @@ INT RTMPQueryInformation(
 				Status = -EFAULT;
             }
             break;
-#ifdef RALINK_ATE
-		case RT_QUERY_ATE_TXDONE_COUNT:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_QUERY_ATE_TXDONE_COUNT \n"));
-			wrq->u.data.length = sizeof(UINT32);
-			if (copy_to_user(wrq->u.data.pointer, &pAdapter->ate.TxDoneCount, wrq->u.data.length))
-			{
-				Status = -EFAULT;
-			}
-			break;
-#endif // RALINK_ATE //
         case OID_802_11_BSSID_LIST:
             if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
             {
@@ -4776,14 +4630,6 @@ INT RTMPQueryInformation(
             Status = copy_to_user(wrq->u.data.pointer, &MediaState, wrq->u.data.length);
             break;
         case OID_802_11_BSSID:
-#ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				Status = NDIS_STATUS_RESOURCES;
-				break;
-			}
-#endif // RALINK_ATE //
             if (INFRA_ON(pAdapter) || ADHOC_ON(pAdapter))
             {
                 Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.Bssid, sizeof(NDIS_802_11_MAC_ADDRESS));
@@ -5121,7 +4967,6 @@ INT RTMPQueryInformation(
 			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.bWmmCapable, wrq->u.data.length);
 			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_WMM (=%d)\n",	pAdapter->CommonCfg.bWmmCapable));
 			break;
-#ifdef WPA_SUPPLICANT_SUPPORT
         case RT_OID_NEW_DRIVER:
             {
                 UCHAR enabled = 1;
@@ -5135,8 +4980,6 @@ INT RTMPQueryInformation(
 	        Status = copy_to_user(wrq->u.data.pointer, &pAdapter->StaCfg.WpaSupplicantUP, wrq->u.data.length);
             DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_WPA_SUPPLICANT_SUPPORT (=%d)\n", pAdapter->StaCfg.WpaSupplicantUP));
 	        break;
-#endif // WPA_SUPPLICANT_SUPPORT //
-
         case RT_OID_DRIVER_DEVICE_NAME:
             DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_DRIVER_DEVICE_NAME \n"));
 			wrq->u.data.length = 16;
@@ -5211,154 +5054,20 @@ INT RTMPQueryInformation(
         case RT_OID_QUERY_MULTIPLE_CARD_SUPPORT:
 			wrq->u.data.length = sizeof(UCHAR);
             i = 0;
-#ifdef MULTIPLE_CARD_SUPPORT
-            i = 1;
-#endif // MULTIPLE_CARD_SUPPORT //
 			if (copy_to_user(wrq->u.data.pointer, &i, wrq->u.data.length))
             {
 				Status = -EFAULT;
             }
             DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_QUERY_MULTIPLE_CARD_SUPPORT(=%d) \n", i));
             break;
-#ifdef SNMP_SUPPORT
-		case RT_OID_802_11_MAC_ADDRESS:
-            wrq->u.data.length = MAC_ADDR_LEN;
-            Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CurrentAddress, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_MANUFACTUREROUI:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_MANUFACTUREROUI \n"));
-			wrq->u.data.length = ManufacturerOUI_LEN;
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CurrentAddress, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_MANUFACTURERNAME:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_MANUFACTURERNAME \n"));
-			wrq->u.data.length = strlen(ManufacturerNAME);
-			Status = copy_to_user(wrq->u.data.pointer, ManufacturerNAME, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_RESOURCETYPEIDNAME:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_RESOURCETYPEIDNAME \n"));
-			wrq->u.data.length = strlen(ResourceTypeIdName);
-			Status = copy_to_user(wrq->u.data.pointer, ResourceTypeIdName, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_PRIVACYOPTIONIMPLEMENTED:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_PRIVACYOPTIONIMPLEMENTED \n"));
-			ulInfo = 1; // 1 is support wep else 2 is not support.
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_POWERMANAGEMENTMODE:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_POWERMANAGEMENTMODE \n"));
-			if (pAdapter->StaCfg.Psm == PSMP_ACTION)
-				ulInfo = 1; // 1 is power active else 2 is power save.
-			else
-				ulInfo = 2;
-
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-			break;
-
-		case OID_802_11_WEPDEFAULTKEYVALUE:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_WEPDEFAULTKEYVALUE \n"));
-			//KeyIdxValue.KeyIdx = pAd->PortCfg.MBSSID[pAd->IoctlIF].DefaultKeyId;
-			pKeyIdxValue = wrq->u.data.pointer;
-			DBGPRINT(RT_DEBUG_TRACE,("KeyIdxValue.KeyIdx = %d, \n",pKeyIdxValue->KeyIdx));
-			valueLen = pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen;
-			NdisMoveMemory(pKeyIdxValue->Value,
-						   &pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].Key,
-						   valueLen);
-			pKeyIdxValue->Value[valueLen]='\0';
-
-			wrq->u.data.length = sizeof(DefaultKeyIdxValue);
-
-			Status = copy_to_user(wrq->u.data.pointer, pKeyIdxValue, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE,("DefaultKeyId = %d, total len = %d, str len=%d, KeyValue= %02x %02x %02x %02x \n", pAdapter->StaCfg.DefaultKeyId, wrq->u.data.length, pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen,
-			pAdapter->SharedKey[BSS0][0].Key[0],
-			pAdapter->SharedKey[BSS0][1].Key[0],
-			pAdapter->SharedKey[BSS0][2].Key[0],
-			pAdapter->SharedKey[BSS0][3].Key[0]));
-			break;
-
-		case OID_802_11_WEPDEFAULTKEYID:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_WEPDEFAULTKEYID \n"));
-			wrq->u.data.length = sizeof(UCHAR);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->StaCfg.DefaultKeyId, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("DefaultKeyId =%d \n", pAdapter->StaCfg.DefaultKeyId));
-			break;
-
-		case RT_OID_802_11_WEPKEYMAPPINGLENGTH:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_WEPKEYMAPPINGLENGTH \n"));
-			wrq->u.data.length = sizeof(UCHAR);
-			Status = copy_to_user(wrq->u.data.pointer,
-									&pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen,
-									wrq->u.data.length);
-			break;
-
-		case OID_802_11_SHORTRETRYLIMIT:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_SHORTRETRYLIMIT \n"));
-			wrq->u.data.length = sizeof(ULONG);
-			RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
-			ShortRetryLimit = tx_rty_cfg.field.ShortRtyLimit;
-			DBGPRINT(RT_DEBUG_TRACE, ("ShortRetryLimit =%ld,  tx_rty_cfg.field.ShortRetryLimit=%d\n", ShortRetryLimit, tx_rty_cfg.field.ShortRtyLimit));
-			Status = copy_to_user(wrq->u.data.pointer, &ShortRetryLimit, wrq->u.data.length);
-			break;
-
-		case OID_802_11_LONGRETRYLIMIT:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_LONGRETRYLIMIT \n"));
-			wrq->u.data.length = sizeof(ULONG);
-			RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
-			LongRetryLimit = tx_rty_cfg.field.LongRtyLimit;
-			DBGPRINT(RT_DEBUG_TRACE, ("LongRetryLimit =%ld,  tx_rty_cfg.field.LongRtyLimit=%d\n", LongRetryLimit, tx_rty_cfg.field.LongRtyLimit));
-			Status = copy_to_user(wrq->u.data.pointer, &LongRetryLimit, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_PRODUCTID:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_PRODUCTID \n"));
-
-			{
-
-				USHORT  device_id;
-				if (((POS_COOKIE)pAdapter->OS_Cookie)->pci_dev != NULL)
-			    	pci_read_config_word(((POS_COOKIE)pAdapter->OS_Cookie)->pci_dev, PCI_DEVICE_ID, &device_id);
-				else
-					DBGPRINT(RT_DEBUG_TRACE, (" pci_dev = NULL\n"));
-				sprintf(tmp, "%04x %04x\n", NIC_PCI_VENDOR_ID, device_id);
-			}
-			wrq->u.data.length = strlen(tmp);
-			Status = copy_to_user(wrq->u.data.pointer, tmp, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_MANUFACTUREID:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_MANUFACTUREID \n"));
-			wrq->u.data.length = strlen(ManufacturerNAME);
-			Status = copy_to_user(wrq->u.data.pointer, ManufacturerNAME, wrq->u.data.length);
-			break;
-
-		case OID_802_11_CURRENTCHANNEL:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_CURRENTCHANNEL \n"));
-			wrq->u.data.length = sizeof(UCHAR);
-			DBGPRINT(RT_DEBUG_TRACE, ("sizeof UCHAR=%d, channel=%d \n", sizeof(UCHAR), pAdapter->CommonCfg.Channel));
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.Channel, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
-			break;
-#endif //SNMP_SUPPORT
 
 		case OID_802_11_BUILD_CHANNEL_EX:
 			{
 				UCHAR value;
 				DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_BUILD_CHANNEL_EX \n"));
 				wrq->u.data.length = sizeof(UCHAR);
-#ifdef EXT_BUILD_CHANNEL_LIST
-				DBGPRINT(RT_DEBUG_TRACE, ("Support EXT_BUILD_CHANNEL_LIST.\n"));
-				value = 1;
-#else
 				DBGPRINT(RT_DEBUG_TRACE, ("Doesn't support EXT_BUILD_CHANNEL_LIST.\n"));
 				value = 0;
-#endif // EXT_BUILD_CHANNEL_LIST //
 				Status = copy_to_user(wrq->u.data.pointer, &value, 1);
 				DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
 			}
@@ -5409,35 +5118,6 @@ INT RTMPQueryInformation(
 			DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
 			break;
 
-
-#ifdef QOS_DLS_SUPPORT
-		case RT_OID_802_11_QUERY_DLS:
-			wrq->u.data.length = sizeof(BOOLEAN);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.bDLSCapable, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_DLS(=%d)\n", pAdapter->CommonCfg.bDLSCapable));
-			break;
-
-		case RT_OID_802_11_QUERY_DLS_PARAM:
-			{
-				PRT_802_11_DLS_INFO	pDlsInfo = kmalloc(sizeof(RT_802_11_DLS_INFO), GFP_ATOMIC);
-				if (pDlsInfo == NULL)
-					break;
-
-				for (i=0; i<MAX_NUM_OF_DLS_ENTRY; i++)
-				{
-					RTMPMoveMemory(&pDlsInfo->Entry[i], &pAdapter->StaCfg.DLSEntry[i], sizeof(RT_802_11_DLS_UI));
-				}
-
-				pDlsInfo->num = MAX_NUM_OF_DLS_ENTRY;
-				wrq->u.data.length = sizeof(RT_802_11_DLS_INFO);
-				Status = copy_to_user(wrq->u.data.pointer, pDlsInfo, wrq->u.data.length);
-				DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_DLS_PARAM\n"));
-
-				if (pDlsInfo)
-					kfree(pDlsInfo);
-			}
-			break;
-#endif // QOS_DLS_SUPPORT //
         default:
             DBGPRINT(RT_DEBUG_TRACE, ("Query::unknown IOCTL's subcmd = 0x%08x\n", cmd));
             Status = -EOPNOTSUPP;
@@ -5480,14 +5160,6 @@ INT rt28xx_sta_ioctl(
     //check if the interface is down
     if(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
     {
-#ifdef CONFIG_APSTA_MIXED_SUPPORT
-	    if (wrq->u.data.pointer == NULL)
-	    {
-		    return Status;
-	    }
-
-	    if (strstr(wrq->u.data.pointer, "OpMode") == NULL)
-#endif // CONFIG_APSTA_MIXED_SUPPORT //
         {
             DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
 		    return -ENETDOWN;
@@ -5501,15 +5173,6 @@ INT rt28xx_sta_ioctl(
 
 	switch(cmd)
 	{
-#ifdef RALINK_ATE
-#ifdef RALINK_28xx_QA
-		case RTPRIV_IOCTL_ATE:
-			{
-				RtmpDoAte(pAd, wrq);
-			}
-			break;
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
         case SIOCGIFHWADDR:
 			DBGPRINT(RT_DEBUG_TRACE, ("IOCTL::SIOCGIFHWADDR\n"));
 			memcpy(wrq->u.name, pAd->CurrentAddress, ETH_ALEN);
@@ -5640,6 +5303,9 @@ INT rt28xx_sta_ioctl(
 			Status = -EOPNOTSUPP;
 			break;
 		case RT_PRIV_IOCTL:
+#ifdef RT30xx
+        case RT_PRIV_IOCTL_EXT:
+#endif
 			subcmd = wrq->u.data.flags;
 			if( subcmd & OID_GET_SET_TOGGLE)
 				Status = RTMPSetInformation(pAd, rq, subcmd);
@@ -5671,6 +5337,11 @@ INT rt28xx_sta_ioctl(
 		case RTPRIV_IOCTL_E2P:
 			RTMPIoctlE2PROM(pAd, wrq);
 			break;
+#ifdef RT30xx
+		case RTPRIV_IOCTL_RF:
+			RTMPIoctlRF(pAd, wrq);
+			break;
+#endif // RT30xx //
 #endif // DBG //
         case SIOCETHTOOL:
                 break;
@@ -5766,6 +5437,9 @@ INT	Set_WmmCapable_Proc(
 	bWmmCapable = simple_strtol(arg, 0, 10);
 
 	if ((bWmmCapable == 1)
+#ifdef RT2870
+		&& (pAd->NumberOfPipes >= 5)
+#endif // RT2870 //
 		)
 		pAd->CommonCfg.bWmmCapable = TRUE;
 	else if (bWmmCapable == 0)
@@ -5873,19 +5547,14 @@ INT Set_NetworkType_Proc(
 		DBGPRINT(RT_DEBUG_TRACE, ("fOP_STATUS_MEDIA_STATE_CONNECTED \n"));
         if (pAdapter->CommonCfg.CentralChannel == 0)
         {
-#ifdef DOT11_N_SUPPORT
             if (pAdapter->CommonCfg.PhyMode == PHY_11AN_MIXED)
                 pAdapter->CommonCfg.CentralChannel = 36;
             else
-#endif // DOT11_N_SUPPORT //
                 pAdapter->CommonCfg.CentralChannel = 6;
         }
-#ifdef DOT11_N_SUPPORT
         else
             N_ChannelCheck(pAdapter);
-#endif // DOT11_N_SUPPORT //
 
-#ifdef DOT11_N_SUPPORT
 	if (pAdapter->CommonCfg.PhyMode >= PHY_11ABGN_MIXED &&
             pAdapter->CommonCfg.RegTransmitSetting.field.BW == BW_40 &&
             pAdapter->CommonCfg.RegTransmitSetting.field.EXTCHA == EXTCHA_ABOVE)
@@ -5936,7 +5605,6 @@ INT Set_NetworkType_Proc(
                                        pAdapter->CommonCfg.CentralChannel));
 		}
 		else
-#endif // DOT11_N_SUPPORT //
 		{
 			// 20MHz
 			RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R4, &bbpValue);
@@ -5997,12 +5665,10 @@ INT Set_AuthMode_Proc(
         pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPANone;
     else if ((strcmp(arg, "WPA2PSK") == 0) || (strcmp(arg, "wpa2psk") == 0))
         pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2PSK;
-#ifdef WPA_SUPPLICANT_SUPPORT
     else if ((strcmp(arg, "WPA") == 0) || (strcmp(arg, "wpa") == 0))
         pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA;
     else if ((strcmp(arg, "WPA2") == 0) || (strcmp(arg, "wpa2") == 0))
         pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2;
-#endif // WPA_SUPPLICANT_SUPPORT //
     else
         return FALSE;
 
@@ -6544,7 +6210,6 @@ INT Set_PSMode_Proc(
     return TRUE;
 }
 
-#ifdef WPA_SUPPLICANT_SUPPORT
 /*
     ==========================================================================
     Description:
@@ -6575,7 +6240,6 @@ INT Set_Wpa_Support(
 
     return TRUE;
 }
-#endif // WPA_SUPPLICANT_SUPPORT //
 
 #ifdef DBG
 /*
@@ -6608,7 +6272,9 @@ VOID RTMPIoctlMAC(
 	UCHAR				temp[16], temp2[16];
 	UINT32				macValue = 0;
 	INT					Status;
-
+#ifdef RT30xx
+	BOOLEAN				bIsPrintAllMAC = FALSE;
+#endif
 
 	memset(msg, 0x00, 1024);
 	if (wrq->u.data.length > 1) //No parameters.
@@ -6659,7 +6325,13 @@ VOID RTMPIoctlMAC(
 					sprintf(msg+strlen(msg), "[0x%08lX]:%08X  ", macAddr , macValue);
 				}
 				else
+#ifndef RT30xx
 				{//Invalid parametes, so default printk all bbp
+#endif
+#ifdef RT30xx
+				{//Invalid parametes, so default printk all mac
+					bIsPrintAllMAC = TRUE;
+#endif
 					goto next;
 				}
 			}
@@ -6730,13 +6402,6 @@ VOID RTMPIoctlMAC(
                         UCHAR R66;
                         pAdapter->BbpTuning.bEnable = FALSE;
                         R66 = 0x26 + GET_LNA_GAIN(pAdapter);
-#ifdef RALINK_ATE
-						if (ATE_ON(pAdapter))
-						{
-							ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R66, (0x26 + GET_LNA_GAIN(pAdapter)));
-						}
-						else
-#endif // RALINK_ATE //
 						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R66, (0x26 + GET_LNA_GAIN(pAdapter)));
                         DBGPRINT(RT_DEBUG_TRACE,("turn off R17 tuning, restore to 0x%02x\n", R66));
                     }
@@ -6750,7 +6415,52 @@ VOID RTMPIoctlMAC(
 			}
 		}
 	}
+#ifdef RT30xx
+	else
+		bIsPrintAllMAC = TRUE;
+#endif
 next:
+#ifdef RT30xx
+	if (bIsPrintAllMAC)
+	{
+		struct file		*file_w;
+		PCHAR			fileName = "MacDump.txt";
+		mm_segment_t	orig_fs;
+
+		orig_fs = get_fs();
+		set_fs(KERNEL_DS);
+
+		// open file
+		file_w = filp_open(fileName, O_WRONLY|O_CREAT, 0);
+		if (IS_ERR(file_w))
+		{
+			DBGPRINT(RT_DEBUG_TRACE, ("-->2) %s: Error %ld opening %s\n", __func__, -PTR_ERR(file_w), fileName));
+		}
+		else
+		{
+			if (file_w->f_op && file_w->f_op->write)
+			{
+				file_w->f_pos = 0;
+				macAddr = 0x1000;
+
+				while (macAddr <= 0x1800)
+				{
+					RTMP_IO_READ32(pAdapter, macAddr, &macValue);
+					sprintf(msg, "%08lx = %08X\n", macAddr, macValue);
+
+					// write data to file
+					file_w->f_op->write(file_w, msg, strlen(msg), &file_w->f_pos);
+
+					printk("%s", msg);
+					macAddr += 4;
+				}
+				sprintf(msg, "\nDump all MAC values to %s\n", fileName);
+			}
+			filp_close(file_w, NULL);
+		}
+		set_fs(orig_fs);
+	}
+#endif /* RT30xx */
 	if(strlen(msg) == 1)
 		sprintf(msg+strlen(msg), "===>Error command format!");
 
@@ -6791,7 +6501,9 @@ VOID RTMPIoctlE2PROM(
 	UCHAR				temp[16], temp2[16];
 	USHORT				eepValue;
 	int					Status;
-
+#ifdef RT30xx
+	BOOLEAN				bIsPrintAllE2P = FALSE;
+#endif
 
 	memset(msg, 0x00, 1024);
 	if (wrq->u.data.length > 1) //No parameters.
@@ -6845,6 +6557,9 @@ VOID RTMPIoctlE2PROM(
 				}
 				else
 				{//Invalid parametes, so default printk all bbp
+#ifdef RT30xx
+					bIsPrintAllE2P = TRUE;
+#endif
 					goto next;
 				}
 			}
@@ -6903,7 +6618,52 @@ VOID RTMPIoctlE2PROM(
 			sprintf(msg+strlen(msg), "[0x%02X]:%02X  ", eepAddr, eepValue);
 		}
 	}
+#ifdef RT30xx
+	else
+		bIsPrintAllE2P = TRUE;
+#endif
 next:
+#ifdef RT30xx
+	if (bIsPrintAllE2P)
+	{
+		struct file		*file_w;
+		PCHAR			fileName = "EEPROMDump.txt";
+		mm_segment_t	orig_fs;
+
+		orig_fs = get_fs();
+		set_fs(KERNEL_DS);
+
+		// open file
+		file_w = filp_open(fileName, O_WRONLY|O_CREAT, 0);
+		if (IS_ERR(file_w))
+		{
+			DBGPRINT(RT_DEBUG_TRACE, ("-->2) %s: Error %ld opening %s\n", __func__, -PTR_ERR(file_w), fileName));
+		}
+		else
+		{
+			if (file_w->f_op && file_w->f_op->write)
+			{
+				file_w->f_pos = 0;
+				eepAddr = 0x00;
+
+				while (eepAddr <= 0xFE)
+				{
+					RT28xx_EEPROM_READ16(pAdapter, eepAddr, eepValue);
+					sprintf(msg, "%08x = %04x\n", eepAddr , eepValue);
+
+					// write data to file
+					file_w->f_op->write(file_w, msg, strlen(msg), &file_w->f_pos);
+
+					printk("%s", msg);
+					eepAddr += 2;
+				}
+				sprintf(msg, "\nDump all EEPROM values to %s\n", fileName);
+			}
+			filp_close(file_w, NULL);
+		}
+		set_fs(orig_fs);
+	}
+#endif /* RT30xx */
 	if(strlen(msg) == 1)
 		sprintf(msg+strlen(msg), "===>Error command format!");
 
@@ -6914,6 +6674,154 @@ next:
 
 	DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlE2PROM\n"));
 }
+#ifdef RT30xx
+/*
+    ==========================================================================
+    Description:
+        Read / Write RF register
+Arguments:
+    pAdapter                    Pointer to our adapter
+    wrq                         Pointer to the ioctl argument
+
+    Return Value:
+        None
+
+    Note:
+        Usage:
+               1.) iwpriv ra0 rf                ==> read all RF registers
+               2.) iwpriv ra0 rf 1              ==> read RF where RegID=1
+               3.) iwpriv ra0 rf 1=10		    ==> write RF R1=0x10
+    ==========================================================================
+*/
+VOID RTMPIoctlRF(
+	IN	PRTMP_ADAPTER	pAdapter,
+	IN	struct iwreq	*wrq)
+{
+	CHAR				*this_char;
+	CHAR				*value;
+	UCHAR				regRF = 0;
+	CHAR				msg[2048];
+	CHAR				arg[255];
+	INT					rfId;
+	LONG				rfValue;
+	int					Status;
+	BOOLEAN				bIsPrintAllRF = FALSE;
+
+
+	memset(msg, 0x00, 2048);
+	if (wrq->u.data.length > 1) //No parameters.
+	{
+	    Status = copy_from_user(arg, wrq->u.data.pointer, (wrq->u.data.length > 255) ? 255 : wrq->u.data.length);
+		sprintf(msg, "\n");
+
+	    //Parsing Read or Write
+		this_char = arg;
+		if (!*this_char)
+			goto next;
+
+		if ((value = strchr(this_char, '=')) != NULL)
+			*value++ = 0;
+
+		if (!value || !*value)
+		{ //Read
+			if (sscanf(this_char, "%d", &(rfId)) == 1)
+			{
+				if (rfId <= 31)
+				{
+					// In RT2860 ATE mode, we do not load 8051 firmware.
+                                            //We must access RF directly.
+                    // For RT2870 ATE mode, ATE_RF_IO_WRITE8(/READ8)_BY_REG_ID are redefined.
+					// according to Andy, Gary, David require.
+					// the command rf shall read rf register directly for dubug.
+					// BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
+					RT30xxReadRFRegister(pAdapter, rfId, &regRF);
+
+					sprintf(msg+strlen(msg), "R%02d[0x%02x]:%02X  ", rfId, rfId*2, regRF);
+				}
+				else
+				{//Invalid parametes, so default printk all RF
+					bIsPrintAllRF = TRUE;
+					goto next;
+				}
+			}
+			else
+			{ //Invalid parametes, so default printk all RF
+				bIsPrintAllRF = TRUE;
+				goto next;
+			}
+		}
+		else
+		{ //Write
+			if ((sscanf(this_char, "%d", &(rfId)) == 1) && (sscanf(value, "%lx", &(rfValue)) == 1))
+			{
+				if (rfId <= 31)
+				{
+					// In RT2860 ATE mode, we do not load 8051 firmware.
+					// We should access RF registers directly.
+                    // For RT2870 ATE mode, ATE_RF_IO_WRITE8/READ8_BY_REG_ID are redefined.
+						{
+							// according to Andy, Gary, David require.
+							// the command RF shall read/write RF register directly for dubug.
+							//BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
+					                //BBP_IO_WRITE8_BY_REG_ID(pAdapter, (UCHAR)bbpId,(UCHAR) bbpValue);
+							RT30xxReadRFRegister(pAdapter, rfId, &regRF);
+							RT30xxWriteRFRegister(pAdapter, (UCHAR)rfId,(UCHAR) rfValue);
+					                //Read it back for showing
+							//BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
+							RT30xxReadRFRegister(pAdapter, rfId, &regRF);
+					                sprintf(msg+strlen(msg), "R%02d[0x%02X]:%02X\n", rfId, rfId*2, regRF);
+				                }
+				}
+				else
+				{//Invalid parametes, so default printk all RF
+					bIsPrintAllRF = TRUE;
+				}
+			}
+			else
+			{ //Invalid parametes, so default printk all RF
+				bIsPrintAllRF = TRUE;
+			}
+		}
+	}
+	else
+		bIsPrintAllRF = TRUE;
+next:
+	if (bIsPrintAllRF)
+	{
+		memset(msg, 0x00, 2048);
+		sprintf(msg, "\n");
+		for (rfId = 0; rfId <= 31; rfId++)
+		{
+			// according to Andy, Gary, David require.
+			// the command RF shall read/write RF register directly for dubug.
+			RT30xxReadRFRegister(pAdapter, rfId, &regRF);
+			sprintf(msg+strlen(msg), "%03d = %02X\n", rfId, regRF);
+		}
+		// Copy the information into the user buffer
+		DBGPRINT(RT_DEBUG_TRACE, ("strlen(msg)=%d\n", (UINT32)strlen(msg)));
+		wrq->u.data.length = strlen(msg);
+		if (copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length))
+		{
+			DBGPRINT(RT_DEBUG_TRACE, ("%s: copy_to_user() fail\n", __func__));
+		}
+	}
+	else
+	{
+		if(strlen(msg) == 1)
+			sprintf(msg+strlen(msg), "===>Error command format!");
+
+		DBGPRINT(RT_DEBUG_TRACE, ("copy to user [msg=%s]\n", msg));
+		// Copy the information into the user buffer
+		DBGPRINT(RT_DEBUG_TRACE, ("strlen(msg) =%d\n", (UINT32)strlen(msg)));
+
+		// Copy the information into the user buffer
+		wrq->u.data.length = strlen(msg);
+		Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
+	}
+
+	DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlRF\n\n"));
+}
+#endif // RT30xx //
 #endif // DBG //
 
 
@@ -6960,37 +6868,47 @@ INT Set_ShortRetryLimit_Proc(
 	return TRUE;
 }
 
-#ifdef EXT_BUILD_CHANNEL_LIST
-INT Set_Ieee80211dClientMode_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
+#if !defined(RT2860) && !defined(RT30xx)
+INT	Show_Adhoc_MacTable_Proc(
+	IN	PRTMP_ADAPTER	pAd,
+	IN	PCHAR			extra)
 {
-    if (simple_strtol(arg, 0, 10) == 0)
-        pAdapter->StaCfg.IEEE80211dClientMode = Rt802_11_D_None;
-    else if (simple_strtol(arg, 0, 10) == 1)
-        pAdapter->StaCfg.IEEE80211dClientMode = Rt802_11_D_Flexible;
-    else if (simple_strtol(arg, 0, 10) == 2)
-        pAdapter->StaCfg.IEEE80211dClientMode = Rt802_11_D_Strict;
-    else
-        return FALSE;
+	INT i;
 
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_Ieee802dMode_Proc::(IEEEE0211dMode=%d)\n", pAdapter->StaCfg.IEEE80211dClientMode));
-    return TRUE;
-}
-#endif // EXT_BUILD_CHANNEL_LIST //
+	sprintf(extra, "\n");
 
-#ifdef CARRIER_DETECTION_SUPPORT
-INT Set_CarrierDetect_Proc(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          arg)
-{
-    if (simple_strtol(arg, 0, 10) == 0)
-        pAd->CommonCfg.CarrierDetect.Enable = FALSE;
-    else
-        pAd->CommonCfg.CarrierDetect.Enable = TRUE;
+	sprintf(extra + strlen(extra), "HT Operating Mode : %d\n", pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode);
+
+	sprintf(extra + strlen(extra), "\n%-19s%-4s%-4s%-7s%-7s%-7s%-10s%-6s%-6s%-6s%-6s\n",
+			"MAC", "AID", "BSS", "RSSI0", "RSSI1", "RSSI2", "PhMd", "BW", "MCS", "SGI", "STBC");
+
+	for (i=1; i<MAX_LEN_OF_MAC_TABLE; i++)
+	{
+		PMAC_TABLE_ENTRY pEntry = &pAd->MacTab.Content[i];
+
+		if (strlen(extra) > (IW_PRIV_SIZE_MASK - 30))
+		    break;
+		if ((pEntry->ValidAsCLI || pEntry->ValidAsApCli) && (pEntry->Sst == SST_ASSOC))
+		{
+			sprintf(extra + strlen(extra), "%02X:%02X:%02X:%02X:%02X:%02X  ",
+				pEntry->Addr[0], pEntry->Addr[1], pEntry->Addr[2],
+				pEntry->Addr[3], pEntry->Addr[4], pEntry->Addr[5]);
+			sprintf(extra + strlen(extra), "%-4d", (int)pEntry->Aid);
+			sprintf(extra + strlen(extra), "%-4d", (int)pEntry->apidx);
+			sprintf(extra + strlen(extra), "%-7d", pEntry->RssiSample.AvgRssi0);
+			sprintf(extra + strlen(extra), "%-7d", pEntry->RssiSample.AvgRssi1);
+			sprintf(extra + strlen(extra), "%-7d", pEntry->RssiSample.AvgRssi2);
+			sprintf(extra + strlen(extra), "%-10s", GetPhyMode(pEntry->HTPhyMode.field.MODE));
+			sprintf(extra + strlen(extra), "%-6s", GetBW(pEntry->HTPhyMode.field.BW));
+			sprintf(extra + strlen(extra), "%-6d", pEntry->HTPhyMode.field.MCS);
+			sprintf(extra + strlen(extra), "%-6d", pEntry->HTPhyMode.field.ShortGI);
+			sprintf(extra + strlen(extra), "%-6d", pEntry->HTPhyMode.field.STBC);
+			sprintf(extra + strlen(extra), "%-10d, %d, %d%%\n", pEntry->DebugFIFOCount, pEntry->DebugTxCount,
+						(pEntry->DebugTxCount) ? ((pEntry->DebugTxCount-pEntry->DebugFIFOCount)*100/pEntry->DebugTxCount) : 0);
+			sprintf(extra, "%s\n", extra);
+		}
+	}
 
-    DBGPRINT(RT_DEBUG_TRACE, ("IF Set_CarrierDetect_Proc::(CarrierDetect.Enable=%d)\n", pAd->CommonCfg.CarrierDetect.Enable));
 	return TRUE;
 }
-#endif // CARRIER_DETECTION_SUPPORT //
-
+#endif /* RT2870 */
diff --git a/drivers/staging/rt2860/wpa.h b/drivers/staging/rt2860/wpa.h
index 0134ae6097c..e6716748adf 100644
--- a/drivers/staging/rt2860/wpa.h
+++ b/drivers/staging/rt2860/wpa.h
@@ -90,7 +90,9 @@
 #define TKIP_AP_RXMICK_OFFSET		(TKIP_AP_TXMICK_OFFSET+LEN_TKIP_TXMICK)
 #define TKIP_GTK_LENGTH				((LEN_TKIP_EK)+(LEN_TKIP_RXMICK)+(LEN_TKIP_TXMICK))
 #define LEN_PTK						((LEN_EAP_KEY)+(LEN_TKIP_KEY))
+#ifndef RT30xx
 #define MIN_LEN_OF_GTK				5
+#endif
 
 // RSN IE Length definition
 #define MAX_LEN_OF_RSNIE         	90
@@ -150,19 +152,6 @@
 // EAPOL Key Information definition within Key descriptor format
 typedef	struct PACKED _KEY_INFO
 {
-#ifdef RT_BIG_ENDIAN
-	UCHAR	KeyAck:1;
-    UCHAR	Install:1;
-    UCHAR	KeyIndex:2;
-    UCHAR	KeyType:1;
-    UCHAR	KeyDescVer:3;
-    UCHAR	Rsvd:3;
-    UCHAR	EKD_DL:1;		// EKD for AP; DL for STA
-    UCHAR	Request:1;
-    UCHAR	Error:1;
-    UCHAR	Secure:1;
-    UCHAR	KeyMic:1;
-#else
 	UCHAR	KeyMic:1;
 	UCHAR	Secure:1;
 	UCHAR	Error:1;
@@ -174,7 +163,6 @@ typedef	struct PACKED _KEY_INFO
 	UCHAR	KeyIndex:2;
 	UCHAR	Install:1;
 	UCHAR	KeyAck:1;
-#endif
 }	KEY_INFO, *PKEY_INFO;
 
 // EAPOL Key descriptor format
@@ -204,17 +192,10 @@ typedef	struct PACKED _EAPOL_PACKET
 //802.11i D10 page 83
 typedef struct PACKED _GTK_ENCAP
 {
-#ifndef RT_BIG_ENDIAN
     UCHAR               Kid:2;
     UCHAR               tx:1;
     UCHAR               rsv:5;
     UCHAR               rsv1;
-#else
-    UCHAR               rsv:5;
-    UCHAR               tx:1;
-    UCHAR               Kid:2;
-    UCHAR               rsv1;
-#endif
     UCHAR               GTK[TKIP_GTK_LENGTH];
 }   GTK_ENCAP, *PGTK_ENCAP;
 
@@ -258,19 +239,11 @@ typedef struct PACKED _RSNIE_AUTH {
 
 typedef	union PACKED _RSN_CAPABILITIES	{
 	struct	PACKED {
-#ifdef RT_BIG_ENDIAN
-        USHORT		Rsvd:10;
-        USHORT		GTKSA_R_Counter:2;
-        USHORT		PTKSA_R_Counter:2;
-        USHORT		No_Pairwise:1;
-		USHORT		PreAuth:1;
-#else
         USHORT		PreAuth:1;
 		USHORT		No_Pairwise:1;
 		USHORT		PTKSA_R_Counter:2;
 		USHORT		GTKSA_R_Counter:2;
 		USHORT		Rsvd:10;
-#endif
 	}	field;
 	USHORT			word;
 }	RSN_CAPABILITIES, *PRSN_CAPABILITIES;
diff --git a/drivers/staging/rt2870/2870_main_dev.c b/drivers/staging/rt2870/2870_main_dev.c
index 9d59e3167fe..dd01c64fbf6 100644
--- a/drivers/staging/rt2870/2870_main_dev.c
+++ b/drivers/staging/rt2870/2870_main_dev.c
@@ -46,17 +46,10 @@
 // Otherwise post to forum in ralinktech's web site(www.ralinktech.com) and let all users help you. ***
 MODULE_AUTHOR("Paul Lin <paul_lin@ralinktech.com>");
 MODULE_DESCRIPTION("RT2870 Wireless Lan Linux Driver");
-#ifdef CONFIG_STA_SUPPORT
 MODULE_LICENSE("GPL");
 #ifdef MODULE_VERSION
 MODULE_VERSION(STA_DRIVER_VERSION);
 #endif
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef MULTIPLE_CARD_SUPPORT
-// record whether the card in the card list is used in the card file
-extern UINT8  MC_CardUsed[];
-#endif // MULTIPLE_CARD_SUPPORT //
 
 /* Kernel thread and vars, which handles packets that are completed. Only
  * packets that have a "complete" function are sent here. This way, the
@@ -77,26 +70,6 @@ MODULE_DEVICE_TABLE(usb, rtusb_usb_id);
 #endif
 
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-
-/**************************************************************************/
-/**************************************************************************/
-//tested for kernel 2.4 series
-/**************************************************************************/
-/**************************************************************************/
-static void *rtusb_probe(struct usb_device *dev, UINT interface,
-						const struct usb_device_id *id_table);
-static void rtusb_disconnect(struct usb_device *dev, void *ptr);
-
-struct usb_driver rtusb_driver = {
-		name:"rt2870",
-		probe:rtusb_probe,
-		disconnect:rtusb_disconnect,
-		id_table:rtusb_usb_id,
-	};
-
-#else
-
 #ifdef CONFIG_PM
 static int rt2870_suspend(struct usb_interface *intf, pm_message_t state);
 static int rt2870_resume(struct usb_interface *intf);
@@ -112,9 +85,6 @@ static int rtusb_probe (struct usb_interface *intf,
 static void rtusb_disconnect(struct usb_interface *intf);
 
 struct usb_driver rtusb_driver = {
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,15)
-	.owner = THIS_MODULE,
-#endif
 	.name="rt2870",
 	.probe=rtusb_probe,
 	.disconnect=rtusb_disconnect,
@@ -176,7 +146,6 @@ static int rt2870_resume(
 	return 0;
 }
 #endif // CONFIG_PM //
-#endif // LINUX_VERSION_CODE //
 
 
 // Init driver module
@@ -265,7 +234,12 @@ INT MlmeThread(
 	 */
 	DBGPRINT(RT_DEBUG_TRACE,( "<---%s\n",__func__));
 
+#ifndef RT30xx
 	pObj->MLMEThr_task = NULL;
+#endif
+#ifdef RT30xx
+	pObj->MLMEThr_pid = NULL;
+#endif
 
 	complete_and_exit (&pAd->mlmeComplete, 0);
 	return 0;
@@ -373,7 +347,12 @@ INT RTUSBCmdThread(
 	 */
 	DBGPRINT(RT_DEBUG_TRACE,( "<---RTUSBCmdThread\n"));
 
+#ifndef RT30xx
 	pObj->RTUSBCmdThr_task = NULL;
+#endif
+#ifdef RT30xx
+	pObj->RTUSBCmdThr_pid = NULL;
+#endif
 
 	complete_and_exit (&pAd->CmdQComplete, 0);
 	return 0;
@@ -467,8 +446,12 @@ INT TimerQThread(
 	 */
 	DBGPRINT(RT_DEBUG_TRACE,( "<---%s\n",__func__));
 
+#ifndef RT30xx
 	pObj->TimerQThr_task = NULL;
-
+#endif
+#ifdef RT30xx
+	pObj->TimerQThr_pid = NULL;
+#endif
 	complete_and_exit(&pAd->TimerQComplete, 0);
 	return 0;
 
@@ -636,6 +619,7 @@ VOID RT2870_WatchDog(IN RTMP_ADAPTER *pAd)
 		RTMP_IO_WRITE32(pAd, PBF_CFG, 0xf40006);
 	}
 
+//PS packets use HCCA queue when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA)
 	idx = 0;
 	if ((MACValue & 0xff00) !=0 )
 	{
@@ -649,7 +633,6 @@ VOID RT2870_WatchDog(IN RTMP_ADAPTER *pAd)
 		RTMP_IO_WRITE32(pAd, PBF_CFG, 0xf40006);
 	}
 
-
 	if (pAd->watchDogRxOverFlowCnt >= 2)
 	{
 		DBGPRINT(RT_DEBUG_TRACE, ("Maybe the Rx Bulk-In hanged! Cancel the pending Rx bulks request!\n"));
@@ -740,7 +723,6 @@ VOID RT2870_WatchDog(IN RTMP_ADAPTER *pAd)
 		}
 	}
 
-#ifdef DOT11_N_SUPPORT
 	// For Sigma debug, dump the ba_reordering sequence.
 	if((needDumpSeq == TRUE) && (pAd->CommonCfg.bDisableReordering == 0))
 	{
@@ -768,7 +750,6 @@ VOID RT2870_WatchDog(IN RTMP_ADAPTER *pAd)
 			NdisReleaseSpinLock(&pBAEntry->RxReRingLock);
 		}
 	}
-#endif // DOT11_N_SUPPORT //
 }
 
 /*
@@ -795,19 +776,7 @@ static void _rtusb_disconnect(struct usb_device *dev, PRTMP_ADAPTER pAd)
 				dev->bus->bus_name, dev->devpath));
 	if (!pAd)
 	{
-#ifdef MULTIPLE_CARD_SUPPORT
-		if ((pAd->MC_RowID >= 0) && (pAd->MC_RowID <= MAX_NUM_OF_MULTIPLE_CARD))
-			MC_CardUsed[pAd->MC_RowID] = 0; // not clear MAC address
-#endif // MULTIPLE_CARD_SUPPORT //
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)	/* kernel 2.4 series */
-		while(MOD_IN_USE > 0)
-		{
-			MOD_DEC_USE_COUNT;
-		}
-#else
 		usb_put_dev(dev);
-#endif // LINUX_VERSION_CODE //
 
 		printk("rtusb_disconnect: pAd == NULL!\n");
 		return;
@@ -829,31 +798,17 @@ static void _rtusb_disconnect(struct usb_device *dev, PRTMP_ADAPTER pAd)
 		unregister_netdev (pAd->net_dev);
 	}
 	udelay(1);
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)	/* kernel 2.4 series */
-#else
 	flush_scheduled_work();
-#endif // LINUX_VERSION_CODE //
 	udelay(1);
 
 	// free net_device memory
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)	/* kernel 2.4 series */
-	kfree(net_dev);
-#else
 	free_netdev(net_dev);
-#endif // LINUX_VERSION_CODE //
 
 	// free adapter memory
 	RTMPFreeAdapter(pAd);
 
 	// release a use of the usb device structure
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)	/* kernel 2.4 series */
-	while(MOD_IN_USE > 0)
-	{
-		MOD_DEC_USE_COUNT;
-	}
-#else
 	usb_put_dev(dev);
-#endif // LINUX_VERSION_CODE //
 	udelay(1);
 
 	DBGPRINT(RT_DEBUG_ERROR, (" RTUSB disconnect successfully\n"));
@@ -876,22 +831,6 @@ Return Value:
 Note:
 ========================================================================
 */
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)	/* kernel 2.4 series */
-static void *rtusb_probe(struct usb_device *dev, UINT interface,
-						const struct usb_device_id *id)
-{
-	PRTMP_ADAPTER pAd;
-	rt28xx_probe((void *)dev, (void *)id, interface, &pAd);
-	return (void *)pAd;
-}
-
-//Disconnect function is called within exit routine
-static void rtusb_disconnect(struct usb_device *dev, void *ptr)
-{
-	_rtusb_disconnect(dev, ((PRTMP_ADAPTER)ptr));
-}
-
-#else	/* kernel 2.6 series */
 static int rtusb_probe (struct usb_interface *intf,
 						const struct usb_device_id *id)
 {
@@ -911,7 +850,6 @@ static void rtusb_disconnect(struct usb_interface *intf)
 
 	_rtusb_disconnect(dev, pAd);
 }
-#endif // LINUX_VERSION_CODE //
 
 
 /*
@@ -944,6 +882,7 @@ VOID RT28xxThreadTerminate(
 	RTUSBCancelPendingIRPs(pAd);
 
 	// Terminate Threads
+#ifndef RT30xx
 	BUG_ON(pObj->TimerQThr_task == NULL);
 	CHECK_PID_LEGALITY(task_pid(pObj->TimerQThr_task))
 	{
@@ -985,7 +924,72 @@ VOID RT28xxThreadTerminate(
 		kthread_stop(pObj->RTUSBCmdThr_task);
 		pObj->RTUSBCmdThr_task = NULL;
 	}
+#endif
+#ifdef RT30xx
+	if (pObj->MLMEThr_pid)
+	{
+		printk("Terminate the MLMEThr_pid=%d!\n", pid_nr(pObj->MLMEThr_pid));
+		mb();
+		pAd->mlme_kill = 1;
+		//RT28XX_MLME_HANDLER(pAd);
+		mb();
+		ret = kill_pid(pObj->MLMEThr_pid, SIGTERM, 1);
+		if (ret)
+		{
+			printk (KERN_WARNING "%s: unable to Mlme thread, pid=%d, ret=%d!\n",
+					pAd->net_dev->name, pid_nr(pObj->MLMEThr_pid), ret);
+		}
+		else
+		{
+			//wait_for_completion (&pAd->notify);
+			wait_for_completion (&pAd->mlmeComplete);
+			pObj->MLMEThr_pid = NULL;
+		}
+	}
 
+	if (pObj->RTUSBCmdThr_pid >= 0)
+	{
+		printk("Terminate the RTUSBCmdThr_pid=%d!\n", pid_nr(pObj->RTUSBCmdThr_pid));
+		mb();
+		NdisAcquireSpinLock(&pAd->CmdQLock);
+		pAd->CmdQ.CmdQState = RT2870_THREAD_STOPED;
+		NdisReleaseSpinLock(&pAd->CmdQLock);
+		mb();
+		//RTUSBCMDUp(pAd);
+		ret = kill_pid(pObj->RTUSBCmdThr_pid, SIGTERM, 1);
+		if (ret)
+		{
+			printk(KERN_WARNING "%s: unable to RTUSBCmd thread, pid=%d, ret=%d!\n",
+					pAd->net_dev->name, pid_nr(pObj->RTUSBCmdThr_pid), ret);
+	}
+		else
+		{
+			//wait_for_completion (&pAd->notify);
+			wait_for_completion (&pAd->CmdQComplete);
+			pObj->RTUSBCmdThr_pid = NULL;
+		}
+	}
+	if (pObj->TimerQThr_pid >= 0)
+	{
+		POS_COOKIE pObj = (POS_COOKIE)pAd->OS_Cookie;
+		printk("Terminate the TimerQThr_pid=%d!\n", pid_nr(pObj->TimerQThr_pid));
+		mb();
+		pAd->TimerFunc_kill = 1;
+		mb();
+		ret = kill_pid(pObj->TimerQThr_pid, SIGTERM, 1);
+		if (ret)
+		{
+			printk(KERN_WARNING "%s: unable to stop TimerQThread, pid=%d, ret=%d!\n",
+					pAd->net_dev->name, pid_nr(pObj->TimerQThr_pid), ret);
+		}
+		else
+		{
+			printk("wait_for_completion TimerQThr\n");
+			wait_for_completion(&pAd->TimerQComplete);
+			pObj->TimerQThr_pid = NULL;
+		}
+	}
+#endif
 
 	// Kill tasklets
 	pAd->mlme_kill = 0;
@@ -1030,12 +1034,8 @@ Note:
 BOOLEAN RT28XXChipsetCheck(
 	IN void *_dev_p)
 {
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)	/* kernel 2.4 series */
-	struct usb_device *dev_p = (struct usb_device *)_dev_p;
-#else
 	struct usb_interface *intf = (struct usb_interface *)_dev_p;
 	struct usb_device *dev_p = interface_to_usbdev(intf);
-#endif // LINUX_VERSION_CODE //
 	UINT32 i;
 
 
@@ -1044,7 +1044,12 @@ BOOLEAN RT28XXChipsetCheck(
 		if (dev_p->descriptor.idVendor == rtusb_usb_id[i].idVendor &&
 			dev_p->descriptor.idProduct == rtusb_usb_id[i].idProduct)
 		{
+#ifndef RT30xx
 			printk(KERN_DEBUG "rt2870: idVendor = 0x%x, idProduct = 0x%x\n",
+#endif
+#ifdef RT30xx
+			printk("rt2870: idVendor = 0x%x, idProduct = 0x%x\n",
+#endif
 					dev_p->descriptor.idVendor, dev_p->descriptor.idProduct);
 			break;
 		}
@@ -1082,19 +1087,11 @@ BOOLEAN RT28XXNetDevInit(
 	IN struct  net_device	*net_dev,
 	IN RTMP_ADAPTER 		*pAd)
 {
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)	/* kernel 2.4 series */
-	struct usb_device *dev_p = (struct usb_device *)_dev_p;
-#else
 	struct usb_interface *intf = (struct usb_interface *)_dev_p;
 	struct usb_device *dev_p = interface_to_usbdev(intf);
-#endif // LINUX_VERSION_CODE //
 
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)	/* kernel 2.4 series */
-	pAd->config = dev_p->config;
-#else
 	pAd->config = &dev_p->config->desc;
-#endif // LINUX_VERSION_CODE //
 	return TRUE;
 }
 
@@ -1115,70 +1112,6 @@ Return Value:
 Note:
 ========================================================================
 */
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-BOOLEAN RT28XXProbePostConfig(
-	IN void 				*_dev_p,
-	IN RTMP_ADAPTER 		*pAd,
-	IN INT32				interface)
-{
-	struct usb_device *dev_p = (struct usb_device *)_dev_p;
-	struct usb_interface *intf;
-	struct usb_interface_descriptor *iface_desc;
-	struct usb_endpoint_descriptor *endpoint;
-	ULONG BulkOutIdx;
-	UINT32 i;
-
-
-	/* get the active interface descriptor */
-	intf = &dev_p->actconfig->interface[interface];
-	iface_desc = &intf->altsetting[0];
-
-	/* get # of enpoints */
-	pAd->NumberOfPipes = iface_desc->bNumEndpoints;
-	DBGPRINT(RT_DEBUG_TRACE, ("NumEndpoints=%d\n", iface_desc->bNumEndpoints));
-
-	/* Configure Pipes */
-	endpoint = &iface_desc->endpoint[0];
-	BulkOutIdx = 0;
-
-	for(i=0; i<pAd->NumberOfPipes; i++)
-	{
-		if ((endpoint[i].bmAttributes == USB_ENDPOINT_XFER_BULK) &&
-			((endpoint[i].bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN))
-		{
-			pAd->BulkInEpAddr = endpoint[i].bEndpointAddress;
-			pAd->BulkInMaxPacketSize = endpoint[i].wMaxPacketSize;
-
-			DBGPRINT_RAW(RT_DEBUG_TRACE,
-				("BULK IN MaximumPacketSize = %d\n", pAd->BulkInMaxPacketSize));
-			DBGPRINT_RAW(RT_DEBUG_TRACE,
-				("EP address = 0x%2x  \n", endpoint[i].bEndpointAddress));
-		}
-		else if ((endpoint[i].bmAttributes == USB_ENDPOINT_XFER_BULK) &&
-				((endpoint[i].bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT))
-		{
-			// There are 6 bulk out EP. EP6 highest priority.
-			// EP1-4 is EDCA.  EP5 is HCCA.
-			pAd->BulkOutEpAddr[BulkOutIdx++] = endpoint[i].bEndpointAddress;
-			pAd->BulkOutMaxPacketSize = endpoint[i].wMaxPacketSize;
-
-			DBGPRINT_RAW(RT_DEBUG_TRACE,
-				("BULK OUT MaximumPacketSize = %d\n", pAd->BulkOutMaxPacketSize));
-			DBGPRINT_RAW(RT_DEBUG_TRACE,
-				("EP address = 0x%2x  \n", endpoint[i].bEndpointAddress));
-		}
-	}
-
-	if (!(pAd->BulkInEpAddr && pAd->BulkOutEpAddr[0]))
-	{
-		printk("Could not find both bulk-in and bulk-out endpoints\n");
-		return FALSE;
-	}
-
-	return TRUE;
-}
-
-#else
 BOOLEAN RT28XXProbePostConfig(
 	IN void 				*_dev_p,
 	IN RTMP_ADAPTER 		*pAd,
@@ -1241,7 +1174,6 @@ BOOLEAN RT28XXProbePostConfig(
 
 	return TRUE;
 }
-#endif // LINUX_VERSION_CODE //
 
 
 /*
@@ -1380,9 +1312,7 @@ VOID RT28xx_UpdateBeaconToAsic(
 	else
 	{
 		ptr = (PUCHAR)&pAd->BeaconTxWI;
-#ifdef RT_BIG_ENDIAN
-		RTMPWIEndianChange(ptr, TYPE_TXWI);
-#endif
+
 		if (NdisEqualMemory(pBeaconSync->BeaconTxWI[bcn_idx], &pAd->BeaconTxWI, TXWI_SIZE) == FALSE)
 		{	// If BeaconTxWI changed, we need to rewrite the TxWI for the Beacon frames.
 			pBeaconSync->BeaconBitMap &= (~(BEACON_BITMAP_MASK & (1 << bcn_idx)));
@@ -1417,6 +1347,8 @@ VOID RT28xx_UpdateBeaconToAsic(
 		}
 
 		pBeaconSync->BeaconBitMap |= (1 << bcn_idx);
+
+		// For AP interface, set the DtimBitOn so that we can send Bcast/Mcast frame out after this beacon frame.
 	}
 
 }
@@ -1434,13 +1366,7 @@ VOID RT2870_BssBeaconStop(
 	{
 		INT NumOfBcn;
 
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			NumOfBcn = MAX_MESH_NUM;
-		}
-#endif // CONFIG_STA_SUPPORT //
+		NumOfBcn = MAX_MESH_NUM;
 
 		RTMPCancelTimer(&pAd->CommonCfg.BeaconUpdateTimer, &Cancelled);
 
@@ -1473,13 +1399,7 @@ VOID RT2870_BssBeaconStart(
 	{
 		INT NumOfBcn;
 
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			NumOfBcn = MAX_MESH_NUM;
-		}
-#endif // CONFIG_STA_SUPPORT //
+		NumOfBcn = MAX_MESH_NUM;
 
 		for(apidx=0; apidx<NumOfBcn; apidx++)
 		{
diff --git a/drivers/staging/rt2870/Makefile b/drivers/staging/rt2870/Makefile
index 1a015f408e6..3c17921b74a 100644
--- a/drivers/staging/rt2870/Makefile
+++ b/drivers/staging/rt2870/Makefile
@@ -3,11 +3,7 @@ obj-$(CONFIG_RT2870)	+= rt2870sta.o
 # TODO: all of these should be removed
 EXTRA_CFLAGS += -DLINUX -DAGGREGATION_SUPPORT -DPIGGYBACK_SUPPORT -DWMM_SUPPORT
 EXTRA_CFLAGS += -DRT2870
-EXTRA_CFLAGS += -DCONFIG_STA_SUPPORT
 EXTRA_CFLAGS += -DDBG
-EXTRA_CFLAGS += -DDOT11_N_SUPPORT
-EXTRA_CFLAGS += -DWPA_SUPPLICANT_SUPPORT
-EXTRA_CFLAGS += -DNATIVE_WPA_SUPPLICANT_SUPPORT
 
 rt2870sta-objs :=		\
 	common/md5.o		\
diff --git a/drivers/staging/rt2870/aironet.h b/drivers/staging/rt2870/aironet.h
index 1e07b19b8cd..ae6259710a4 100644
--- a/drivers/staging/rt2870/aironet.h
+++ b/drivers/staging/rt2870/aironet.h
@@ -1,210 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	aironet.h
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Name		Date			Modification logs
-	Paul Lin	04-06-15		Initial
-*/
-
-#ifndef	__AIRONET_H__
-#define	__AIRONET_H__
-
-// Measurement Type definition
-#define	MSRN_TYPE_UNUSED				0
-#define	MSRN_TYPE_CHANNEL_LOAD_REQ		1
-#define	MSRN_TYPE_NOISE_HIST_REQ		2
-#define	MSRN_TYPE_BEACON_REQ			3
-#define	MSRN_TYPE_FRAME_REQ				4
-
-// Scan Mode in Beacon Request
-#define	MSRN_SCAN_MODE_PASSIVE			0
-#define	MSRN_SCAN_MODE_ACTIVE			1
-#define	MSRN_SCAN_MODE_BEACON_TABLE		2
-
-// PHY type definition for Aironet beacon report, CCX 2 table 36-9
-#define	PHY_FH							1
-#define	PHY_DSS							2
-#define	PHY_UNUSED						3
-#define	PHY_OFDM						4
-#define	PHY_HR_DSS						5
-#define	PHY_ERP							6
-
-// RPI table in dBm
-#define	RPI_0			0			//	Power <= -87
-#define	RPI_1			1			//	-87 < Power <= -82
-#define	RPI_2			2			//	-82 < Power <= -77
-#define	RPI_3			3			//	-77 < Power <= -72
-#define	RPI_4			4			//	-72 < Power <= -67
-#define	RPI_5			5			//	-67 < Power <= -62
-#define	RPI_6			6			//	-62 < Power <= -57
-#define	RPI_7			7			//	-57 < Power
-
-// Cisco Aironet IAPP definetions
-#define	AIRONET_IAPP_TYPE					0x32
-#define	AIRONET_IAPP_SUBTYPE_REQUEST		0x01
-#define	AIRONET_IAPP_SUBTYPE_REPORT			0x81
-
-// Measurement Request detail format
-typedef	struct	_MEASUREMENT_REQUEST	{
-	UCHAR	Channel;
-	UCHAR	ScanMode;			// Use only in beacon request, other requests did not use this field
-	USHORT	Duration;
-}	MEASUREMENT_REQUEST, *PMEASUREMENT_REQUEST;
-
-// Beacon Measurement Report
-// All these field might change to UCHAR, because we didn't do anything to these report.
-// We copy all these beacons and report to CCX 2 AP.
-typedef	struct	_BEACON_REPORT	{
-	UCHAR	Channel;
-	UCHAR	Spare;
-	USHORT	Duration;
-	UCHAR	PhyType;			// Definiation is listed above table 36-9
-	UCHAR	RxPower;
-	UCHAR	BSSID[6];
-	UCHAR	ParentTSF[4];
-	UCHAR	TargetTSF[8];
-	USHORT	BeaconInterval;
-	USHORT	CapabilityInfo;
-}	BEACON_REPORT, *PBEACON_REPORT;
-
-// Frame Measurement Report (Optional)
-typedef	struct	_FRAME_REPORT	{
-	UCHAR	Channel;
-	UCHAR	Spare;
-	USHORT	Duration;
-	UCHAR	TA;
-	UCHAR	BSSID[6];
-	UCHAR	RSSI;
-	UCHAR	Count;
-}	FRAME_REPORT, *PFRAME_REPORT;
-
-#pragma pack(1)
-// Channel Load Report
-typedef	struct	_CHANNEL_LOAD_REPORT	{
-	UCHAR	Channel;
-	UCHAR	Spare;
-	USHORT	Duration;
-	UCHAR	CCABusy;
-}	CHANNEL_LOAD_REPORT, *PCHANNEL_LOAD_REPORT;
-#pragma pack()
-
-// Nosie Histogram Report
-typedef	struct	_NOISE_HIST_REPORT	{
-	UCHAR	Channel;
-	UCHAR	Spare;
-	USHORT	Duration;
-	UCHAR	Density[8];
-}	NOISE_HIST_REPORT, *PNOISE_HIST_REPORT;
-
-// Radio Management Capability element
-typedef	struct	_RADIO_MANAGEMENT_CAPABILITY	{
-	UCHAR	Eid;				// TODO: Why the Eid is 1 byte, not normal 2 bytes???
-	UCHAR	Length;
-	UCHAR	AironetOui[3];		// AIronet OUI (00 40 96)
-	UCHAR	Type;				// Type / Version
-	USHORT	Status;				// swap16 required
-}	RADIO_MANAGEMENT_CAPABILITY, *PRADIO_MANAGEMENT_CAPABILITY;
-
-// Measurement Mode Bit definition
-typedef	struct	_MEASUREMENT_MODE	{
-	UCHAR	Rsvd:4;
-	UCHAR	Report:1;
-	UCHAR	NotUsed:1;
-	UCHAR	Enable:1;
-	UCHAR	Parallel:1;
-}	MEASUREMENT_MODE, *PMEASUREMENT_MODE;
-
-// Measurement Request element, This is little endian mode
-typedef	struct	_MEASUREMENT_REQUEST_ELEMENT	{
-	USHORT				Eid;
-	USHORT				Length;				// swap16 required
-	USHORT				Token;				// non-zero unique token
-	UCHAR				Mode;				// Measurement Mode
-	UCHAR				Type;				// Measurement type
-}	MEASUREMENT_REQUEST_ELEMENT, *PMEASUREMENT_REQUEST_ELEMENT;
-
-// Measurement Report element, This is little endian mode
-typedef	struct	_MEASUREMENT_REPORT_ELEMENT	{
-	USHORT				Eid;
-	USHORT				Length;				// swap16 required
-	USHORT				Token;				// non-zero unique token
-	UCHAR				Mode;				// Measurement Mode
-	UCHAR				Type;				// Measurement type
-}	MEASUREMENT_REPORT_ELEMENT, *PMEASUREMENT_REPORT_ELEMENT;
-
-// Cisco Aironet IAPP Frame Header, Network byte order used
-typedef	struct	_AIRONET_IAPP_HEADER {
-	UCHAR	CiscoSnapHeader[8];	// 8 bytes Cisco snap header
-	USHORT	Length;				// IAPP ID & length, remember to swap16 in LE system
-	UCHAR	Type;				// IAPP type
-	UCHAR	SubType;			// IAPP subtype
-	UCHAR	DA[6];				// Destination MAC address
-	UCHAR	SA[6];				// Source MAC address
-	USHORT	Token;				// Dialog token, no need to swap16 since it is for yoken usage only
-}	AIRONET_IAPP_HEADER, *PAIRONET_IAPP_HEADER;
-
-// Radio Measurement Request frame
-typedef	struct	_AIRONET_RM_REQUEST_FRAME	{
-    AIRONET_IAPP_HEADER	IAPP;			// Common header
-	UCHAR				Delay;			// Activation Delay
-	UCHAR				Offset;			// Measurement offset
-}	AIRONET_RM_REQUEST_FRAME, *PAIRONET_RM_REQUEST_FRAME;
-
-// Radio Measurement Report frame
-typedef	struct	_AIRONET_RM_REPORT_FRAME	{
-    AIRONET_IAPP_HEADER	IAPP;			// Common header
-}	AIRONET_RM_REPORT_FRAME, *PAIRONET_RM_REPORT_FRAME;
-
-// Saved element request actions which will saved in StaCfg.
-typedef	struct	_RM_REQUEST_ACTION	{
-	MEASUREMENT_REQUEST_ELEMENT	ReqElem;		// Saved request element
-	MEASUREMENT_REQUEST			Measurement;	// Saved measurement within the request element
-}	RM_REQUEST_ACTION, *PRM_REQUEST_ACTION;
-
-// CCX administration control
-typedef	union	_CCX_CONTROL	{
-	struct	{
-		UINT32		Enable:1;			// Enable CCX2
-		UINT32		LeapEnable:1;		// Enable LEAP at CCX2
-		UINT32		RMEnable:1;			// Radio Measurement Enable
-		UINT32		DCRMEnable:1;		// Non serving channel Radio Measurement enable
-		UINT32		QOSEnable:1;		// Enable QOS for CCX 2.0 support
-		UINT32		FastRoamEnable:1;	// Enable fast roaming
-		UINT32		Rsvd:2;				// Not used
-		UINT32		dBmToRoam:8;		// the condition to roam when receiving Rssi less than this value. It's negative value.
-		UINT32		TuLimit:16;			// Limit for different channel scan
-	}	field;
-	UINT32			word;
-}	CCX_CONTROL, *PCCX_CONTROL;
-
-#endif	// __AIRONET_H__
+#include "../rt2860/aironet.h"
diff --git a/drivers/staging/rt2870/ap.h b/drivers/staging/rt2870/ap.h
index 0dc55751679..fe04b5f45f2 100644
--- a/drivers/staging/rt2870/ap.h
+++ b/drivers/staging/rt2870/ap.h
@@ -1,562 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-    ap.h
-
-    Abstract:
-    Miniport generic portion header file
-
-    Revision History:
-    Who         When          What
-    --------    ----------    ----------------------------------------------
-    Paul Lin    08-01-2002    created
-    James Tan   09-06-2002    modified (Revise NTCRegTable)
-    John Chang  12-22-2004    modified for RT2561/2661. merge with STA driver
-*/
-#ifndef __AP_H__
-#define __AP_H__
-
-
-
-// ========================= AP RTMP.h ================================
-
-
-
-// =============================================================
-//      Function Prototypes
-// =============================================================
-
-// ap_data.c
-
-BOOLEAN APBridgeToWirelessSta(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          pHeader,
-    IN  UINT            HdrLen,
-    IN  PUCHAR          pData,
-    IN  UINT            DataLen,
-    IN  ULONG           fromwdsidx);
-
-BOOLEAN APHandleRxDoneInterrupt(
-    IN  PRTMP_ADAPTER   pAd);
-
-VOID	APSendPackets(
-	IN	NDIS_HANDLE		MiniportAdapterContext,
-	IN	PPNDIS_PACKET	ppPacketArray,
-	IN	UINT			NumberOfPackets);
-
-NDIS_STATUS APSendPacket(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PNDIS_PACKET    pPacket);
-
-
-NDIS_STATUS APHardTransmit(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk,
-	IN	UCHAR			QueIdx);
-
-VOID APRxEAPOLFrameIndicate(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MAC_TABLE_ENTRY	*pEntry,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID);
-
-NDIS_STATUS APCheckRxError(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PRT28XX_RXD_STRUC		pRxD,
-	IN	UCHAR			Wcid);
-
-BOOLEAN APCheckClass2Class3Error(
-    IN  PRTMP_ADAPTER   pAd,
-	IN ULONG Wcid,
-	IN  PHEADER_802_11  pHeader);
-
-VOID APHandleRxPsPoll(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pAddr,
-	IN	USHORT			Aid,
-    IN	BOOLEAN			isActive);
-
-VOID    RTMPDescriptorEndianChange(
-    IN  PUCHAR          pData,
-    IN  ULONG           DescriptorType);
-
-VOID    RTMPFrameEndianChange(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          pData,
-    IN  ULONG           Dir,
-    IN  BOOLEAN         FromRxDoneInt);
-
-// ap_assoc.c
-
-VOID APAssocStateMachineInit(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  STATE_MACHINE *S,
-    OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID  APPeerAssocReqAction(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  MLME_QUEUE_ELEM *Elem);
-
-VOID  APPeerReassocReqAction(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  MLME_QUEUE_ELEM *Elem);
-
-VOID  APPeerDisassocReqAction(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  MLME_QUEUE_ELEM *Elem);
-
-VOID MbssKickOutStas(
-	IN PRTMP_ADAPTER pAd,
-	IN INT apidx,
-	IN USHORT Reason);
-
-VOID APMlmeKickOutSta(
-    IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pStaAddr,
-	IN UCHAR Wcid,
-	IN USHORT Reason);
-
-VOID APMlmeDisassocReqAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-
-VOID  APCls3errAction(
-    IN  PRTMP_ADAPTER   pAd,
-	IN 	ULONG Wcid,
-    IN	PHEADER_802_11	pHeader);
-
-
-USHORT APBuildAssociation(
-    IN PRTMP_ADAPTER pAd,
-    IN MAC_TABLE_ENTRY *pEntry,
-    IN USHORT CapabilityInfo,
-    IN UCHAR  MaxSupportedRateIn500Kbps,
-    IN UCHAR  *RSN,
-    IN UCHAR  *pRSNLen,
-    IN BOOLEAN bWmmCapable,
-    IN ULONG  RalinkIe,
-#ifdef DOT11N_DRAFT3
-    IN EXT_CAP_INFO_ELEMENT ExtCapInfo,
-#endif // DOT11N_DRAFT3 //
-	IN HT_CAPABILITY_IE		*pHtCapability,
-	IN UCHAR		 HtCapabilityLen,
-    OUT USHORT *pAid);
-
-/*
-VOID	RTMPAddClientSec(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR	BssIdx,
-	IN UCHAR		 KeyIdx,
-	IN UCHAR		 CipherAlg,
-	IN PUCHAR		 pKey,
-	IN PUCHAR		 pTxMic,
-	IN PUCHAR		 pRxMic,
-	IN MAC_TABLE_ENTRY *pEntry);
-*/
-
-// ap_auth.c
-
-void APAuthStateMachineInit(
-    IN PRTMP_ADAPTER pAd,
-    IN STATE_MACHINE *Sm,
-    OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID APMlmeDeauthReqAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-
-VOID APCls2errAction(
-    IN PRTMP_ADAPTER pAd,
-	IN 	ULONG Wcid,
-    IN	PHEADER_802_11	pHeader);
-
-// ap_authrsp.c
-
-VOID APAuthRspStateMachineInit(
-    IN PRTMP_ADAPTER pAd,
-    IN PSTATE_MACHINE Sm,
-    IN STATE_MACHINE_FUNC Trans[]);
-
-VOID APPeerAuthAtAuthRspIdleAction(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  MLME_QUEUE_ELEM *Elem);
-
-VOID APPeerDeauthReqAction(
-    IN PRTMP_ADAPTER	pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-
-VOID APPeerAuthSimpleRspGenAndSend(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PHEADER_802_11 pHdr80211,
-    IN  USHORT Alg,
-    IN  USHORT Seq,
-    IN  USHORT StatusCode);
-
-// ap_connect.c
-
-BOOLEAN BeaconTransmitRequired(
-	IN PRTMP_ADAPTER	pAd,
-	IN INT				apidx);
-
-VOID APMakeBssBeacon(
-    IN  PRTMP_ADAPTER   pAd,
-	IN	INT				apidx);
-
-VOID  APUpdateBeaconFrame(
-    IN  PRTMP_ADAPTER   pAd,
-	IN	INT				apidx);
-
-VOID APMakeAllBssBeacon(
-    IN  PRTMP_ADAPTER   pAd);
-
-VOID  APUpdateAllBeaconFrame(
-    IN  PRTMP_ADAPTER   pAd);
-
-
-// ap_sync.c
-
-VOID APSyncStateMachineInit(
-    IN PRTMP_ADAPTER pAd,
-    IN STATE_MACHINE *Sm,
-    OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID APScanTimeout(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-VOID APInvalidStateWhenScan(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID APScanTimeoutAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID APPeerProbeReqAction(
-    IN  PRTMP_ADAPTER pAd,
-    IN  MLME_QUEUE_ELEM *Elem);
-
-VOID APPeerBeaconAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-
-VOID APMlmeScanReqAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID APPeerBeaconAtScanAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID APScanCnclAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID ApSiteSurvey(
-	IN PRTMP_ADAPTER pAd);
-
-VOID SupportRate(
-	IN PUCHAR SupRate,
-	IN UCHAR SupRateLen,
-	IN PUCHAR ExtRate,
-	IN UCHAR ExtRateLen,
-	OUT PUCHAR *Rates,
-	OUT PUCHAR RatesLen,
-	OUT PUCHAR pMaxSupportRate);
-
-
-BOOLEAN ApScanRunning(
-	IN PRTMP_ADAPTER pAd);
-
-#ifdef DOT11N_DRAFT3
-VOID APOverlappingBSSScan(
-	IN RTMP_ADAPTER *pAd);
-#endif // DOT11N_DRAFT3 //
-
-// ap_wpa.c
-
-VOID APWpaStateMachineInit(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  STATE_MACHINE *Sm,
-    OUT STATE_MACHINE_FUNC Trans[]);
-
-// ap_mlme.c
-
-VOID APMlmePeriodicExec(
-    IN  PRTMP_ADAPTER   pAd);
-
-VOID APMlmeSelectTxRateTable(
-	IN PRTMP_ADAPTER		pAd,
-	IN PMAC_TABLE_ENTRY		pEntry,
-	IN PUCHAR				*ppTable,
-	IN PUCHAR				pTableSize,
-	IN PUCHAR				pInitTxRateIdx);
-
-VOID APMlmeSetTxRate(
-	IN PRTMP_ADAPTER		pAd,
-	IN PMAC_TABLE_ENTRY		pEntry,
-	IN PRTMP_TX_RATE_SWITCH	pTxRate);
-
-VOID APMlmeDynamicTxRateSwitching(
-    IN PRTMP_ADAPTER pAd);
-
-VOID APQuickResponeForRateUpExec(
-    IN PVOID SystemSpecific1,
-    IN PVOID FunctionContext,
-    IN PVOID SystemSpecific2,
-    IN PVOID SystemSpecific3);
-
-BOOLEAN APMsgTypeSubst(
-    IN PRTMP_ADAPTER pAd,
-    IN PFRAME_802_11 pFrame,
-    OUT INT *Machine,
-    OUT INT *MsgType);
-
-VOID APQuickResponeForRateUpExec(
-    IN PVOID SystemSpecific1,
-    IN PVOID FunctionContext,
-    IN PVOID SystemSpecific2,
-    IN PVOID SystemSpecific3);
-
-#ifdef RT2870
-VOID BeaconUpdateExec(
-    IN PVOID SystemSpecific1,
-    IN PVOID FunctionContext,
-    IN PVOID SystemSpecific2,
-    IN PVOID SystemSpecific3);
-#endif // RT2870 //
-
-VOID RTMPSetPiggyBack(
-	IN PRTMP_ADAPTER	pAd,
-	IN BOOLEAN			bPiggyBack);
-
-VOID APAsicEvaluateRxAnt(
-	IN PRTMP_ADAPTER	pAd);
-
-VOID APAsicRxAntEvalTimeout(
-	IN PRTMP_ADAPTER	pAd);
-
-// ap.c
-
-VOID APSwitchChannel(
-	IN PRTMP_ADAPTER pAd,
-	IN INT Channel);
-
-NDIS_STATUS APInitialize(
-    IN  PRTMP_ADAPTER   pAd);
-
-VOID APShutdown(
-    IN PRTMP_ADAPTER    pAd);
-
-VOID APStartUp(
-    IN  PRTMP_ADAPTER   pAd);
-
-VOID APStop(
-    IN  PRTMP_ADAPTER   pAd);
-
-VOID APCleanupPsQueue(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PQUEUE_HEADER   pQueue);
-
-VOID MacTableReset(
-    IN  PRTMP_ADAPTER   pAd);
-
-MAC_TABLE_ENTRY *MacTableInsertEntry(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          pAddr,
-	IN	UCHAR			apidx,
-	IN BOOLEAN	CleanAll);
-
-BOOLEAN MacTableDeleteEntry(
-    IN  PRTMP_ADAPTER   pAd,
-	IN USHORT wcid,
-    IN  PUCHAR          pAddr);
-
-MAC_TABLE_ENTRY *MacTableLookup(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          pAddr);
-
-VOID MacTableMaintenance(
-    IN PRTMP_ADAPTER pAd);
-
-UINT32 MacTableAssocStaNumGet(
-	IN PRTMP_ADAPTER pAd);
-
-MAC_TABLE_ENTRY *APSsPsInquiry(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          pAddr,
-    OUT SST             *Sst,
-    OUT USHORT          *Aid,
-    OUT UCHAR           *PsMode,
-    OUT UCHAR           *Rate);
-
-BOOLEAN APPsIndicate(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          pAddr,
-	IN ULONG Wcid,
-    IN  UCHAR           Psm);
-
-VOID ApLogEvent(
-    IN PRTMP_ADAPTER    pAd,
-    IN PUCHAR           pAddr,
-    IN USHORT           Event);
-
-#ifdef DOT11_N_SUPPORT
-VOID APUpdateOperationMode(
-    IN PRTMP_ADAPTER pAd);
-#endif // DOT11_N_SUPPORT //
-
-VOID APUpdateCapabilityAndErpIe(
-	IN PRTMP_ADAPTER pAd);
-
-BOOLEAN ApCheckAccessControlList(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR        pAddr,
-	IN UCHAR         Apidx);
-
-VOID ApUpdateAccessControlList(
-    IN PRTMP_ADAPTER pAd,
-    IN UCHAR         Apidx);
-
-VOID ApEnqueueNullFrame(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR        pAddr,
-	IN UCHAR         TxRate,
-	IN UCHAR         PID,
-	IN UCHAR         apidx,
-    IN BOOLEAN       bQosNull,
-    IN BOOLEAN       bEOSP,
-    IN UCHAR         OldUP);
-
-VOID ApSendFrame(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PVOID           pBuffer,
-    IN  ULONG           Length,
-    IN  UCHAR           TxRate,
-    IN  UCHAR           PID);
-
-VOID ApEnqueueAckFrame(
-    IN PRTMP_ADAPTER pAd,
-    IN PUCHAR        pAddr,
-    IN UCHAR         TxRate,
-	IN UCHAR         apidx);
-
-UCHAR APAutoSelectChannel(
-	IN PRTMP_ADAPTER pAd,
-	IN BOOLEAN Optimal);
-
-// ap_sanity.c
-
-
-BOOLEAN PeerAssocReqCmmSanity(
-    IN PRTMP_ADAPTER pAd,
-	IN BOOLEAN isRessoc,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pAddr2,
-    OUT USHORT *pCapabilityInfo,
-    OUT USHORT *pListenInterval,
-    OUT PUCHAR pApAddr,
-    OUT UCHAR *pSsidLen,
-    OUT char *Ssid,
-    OUT UCHAR *pRatesLen,
-    OUT UCHAR Rates[],
-    OUT UCHAR *RSN,
-    OUT UCHAR *pRSNLen,
-    OUT BOOLEAN *pbWmmCapable,
-#ifdef WSC_AP_SUPPORT
-    OUT BOOLEAN *pWscCapable,
-#endif // WSC_AP_SUPPORT //
-    OUT ULONG  *pRalinkIe,
-#ifdef DOT11N_DRAFT3
-    OUT EXT_CAP_INFO_ELEMENT	*pExtCapInfo,
-#endif // DOT11N_DRAFT3 //
-    OUT UCHAR		 *pHtCapabilityLen,
-    OUT HT_CAPABILITY_IE *pHtCapability);
-
-BOOLEAN PeerDisassocReqSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pAddr2,
-    OUT USHORT *Reason);
-
-BOOLEAN PeerDeauthReqSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pAddr2,
-    OUT USHORT *Reason);
-
-BOOLEAN APPeerAuthSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-	OUT PUCHAR pAddr1,
-    OUT PUCHAR pAddr2,
-    OUT USHORT *Alg,
-    OUT USHORT *Seq,
-    OUT USHORT *Status,
-    CHAR *ChlgText);
-
-BOOLEAN APPeerProbeReqSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pAddr2,
-    OUT CHAR Ssid[],
-    OUT UCHAR *SsidLen);
-
-BOOLEAN APPeerBeaconAndProbeRspSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pAddr2,
-    OUT PUCHAR pBssid,
-    OUT CHAR Ssid[],
-    OUT UCHAR *SsidLen,
-    OUT UCHAR *BssType,
-    OUT USHORT *BeaconPeriod,
-    OUT UCHAR *Channel,
-    OUT LARGE_INTEGER *Timestamp,
-    OUT USHORT *CapabilityInfo,
-    OUT UCHAR Rate[],
-    OUT UCHAR *RateLen,
-    OUT BOOLEAN *ExtendedRateIeExist,
-    OUT UCHAR *Erp);
-
-// ap_info.c
-
-
-
-// ================== end of AP RTMP.h ========================
-
-
-#endif  // __AP_H__
-
+#include "../rt2860/ap.h"
diff --git a/drivers/staging/rt2870/chlist.h b/drivers/staging/rt2870/chlist.h
index 9e15b9daeb8..31999583b37 100644
--- a/drivers/staging/rt2870/chlist.h
+++ b/drivers/staging/rt2870/chlist.h
@@ -1,1296 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	chlist.c
-
-	Abstract:
-
-	Revision History:
-	Who         When          What
-	--------    ----------    ----------------------------------------------
-	Fonchi Wu   2007-12-19    created
-*/
-
-#ifndef __CHLIST_H__
-#define __CHLIST_H__
-
-#include "rtmp_type.h"
-#include "rtmp_def.h"
-
-
-#define ODOR			0
-#define IDOR			1
-#define BOTH			2
-
-#define BAND_5G         0
-#define BAND_24G        1
-#define BAND_BOTH       2
-
-typedef struct _CH_DESP {
-	UCHAR FirstChannel;
-	UCHAR NumOfCh;
-	CHAR MaxTxPwr;			// dBm
-	UCHAR Geography;			// 0:out door, 1:in door, 2:both
-	BOOLEAN DfsReq;			// Dfs require, 0: No, 1: yes.
-} CH_DESP, *PCH_DESP;
-
-typedef struct _CH_REGION {
-	UCHAR CountReg[3];
-	UCHAR DfsType;			// 0: CE, 1: FCC, 2: JAP, 3:JAP_W53, JAP_W56
-	CH_DESP ChDesp[10];
-} CH_REGION, *PCH_REGION;
-
-static CH_REGION ChRegion[] =
-{
-		{	// Antigua and Berbuda
-			"AG",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  23, BOTH, FALSE},	// 5G, ch 52~64
-				{ 100, 11, 30, BOTH, FALSE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Argentina
-			"AR",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 52,  4,  24, BOTH, FALSE},	// 5G, ch 52~64
-				{ 149, 4,  30, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Aruba
-			"AW",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  23, BOTH, FALSE},	// 5G, ch 52~64
-				{ 100, 11, 30, BOTH, FALSE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Australia
-			"AU",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  24, BOTH, FALSE},	// 5G, ch 52~64
-				{ 149, 5,  30, BOTH, FALSE},	// 5G, ch 149~165
-				{ 0},							// end
-			}
-		},
-
-		{	// Austria
-			"AT",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  23, IDOR, TRUE},		// 5G, ch 36~48
-				{ 52,  4,  23, IDOR, TRUE},		// 5G, ch 52~64
-				{ 100, 11, 30, BOTH, TRUE},		// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Bahamas
-			"BS",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  24, BOTH, FALSE},	// 5G, ch 52~64
-				{ 149, 5,  30, BOTH, FALSE},	// 5G, ch 149~165
-				{ 0},							// end
-			}
-		},
-
-		{	// Barbados
-			"BB",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  24, BOTH, FALSE},	// 5G, ch 52~64
-				{ 100, 11, 30, BOTH, FALSE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Bermuda
-			"BM",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  24, BOTH, FALSE},	// 5G, ch 52~64
-				{ 100, 11, 30, BOTH, FALSE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Brazil
-			"BR",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  24, BOTH, FALSE},	// 5G, ch 52~64
-				{ 100, 11, 24, BOTH, FALSE},	// 5G, ch 100~140
-				{ 149, 5,  30, BOTH, FALSE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Belgium
-			"BE",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  18, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  18, IDOR, FALSE},	// 5G, ch 52~64
-				{ 0},							// end
-			}
-		},
-
-		{	// Bulgaria
-			"BG",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11, 30, ODOR, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Canada
-			"CA",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  23, BOTH, FALSE},	// 5G, ch 52~64
-				{ 149, 5,  30, BOTH, FALSE},	// 5G, ch 149~165
-				{ 0},							// end
-			}
-		},
-
-		{	// Cayman IsLands
-			"KY",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  24, BOTH, FALSE},	// 5G, ch 52~64
-				{ 100, 11, 30, BOTH, FALSE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Chile
-			"CL",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  20, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  20, BOTH, FALSE},	// 5G, ch 52~64
-				{ 149, 5,  20, BOTH, FALSE},	// 5G, ch 149~165
-				{ 0},							// end
-			}
-		},
-
-		{	// China
-			"CN",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 149, 4,  27, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Colombia
-			"CO",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  17, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  24, BOTH, FALSE},	// 5G, ch 52~64
-				{ 100, 11, 30, BOTH, FALSE},	// 5G, ch 100~140
-				{ 149, 5,  30, BOTH, FALSE},	// 5G, ch 149~165
-				{ 0},							// end
-			}
-		},
-
-		{	// Costa Rica
-			"CR",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  17, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  24, BOTH, FALSE},	// 5G, ch 52~64
-				{ 149, 4,  30, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Cyprus
-			"CY",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  24, IDOR, TRUE},		// 5G, ch 52~64
-				{ 100, 11, 30, BOTH, TRUE},		// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Czech_Republic
-			"CZ",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  23, IDOR, TRUE},		// 5G, ch 52~64
-				{ 0},							// end
-			}
-		},
-
-		{	// Denmark
-			"DK",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  23, IDOR, TRUE},		// 5G, ch 52~64
-				{ 100, 11, 30, BOTH, TRUE},		// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Dominican Republic
-			"DO",
-			CE,
-			{
-				{ 1,   0,  20, BOTH, FALSE},	// 2.4 G, ch 0
-				{ 149, 4,  20, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Equador
-			"EC",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 100, 11,  27, BOTH, FALSE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// El Salvador
-			"SV",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,   23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,  4,   30, BOTH, TRUE},	// 5G, ch 52~64
-				{ 149, 4,   36, BOTH, TRUE},	// 5G, ch 149~165
-				{ 0},							// end
-			}
-		},
-
-		{	// Finland
-			"FI",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,   23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,  4,   23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// France
-			"FR",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,   23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,  4,   23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 0},							// end
-			}
-		},
-
-		{	// Germany
-			"DE",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,   23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,  4,   23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Greece
-			"GR",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,   23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,  4,   23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, ODOR, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Guam
-			"GU",
-			CE,
-			{
-				{ 1,   11,  20, BOTH, FALSE},	// 2.4 G, ch 1~11
-				{ 36,  4,   17, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,   24, BOTH, FALSE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, FALSE},	// 5G, ch 100~140
-				{ 149,  5,  30, BOTH, FALSE},	// 5G, ch 149~165
-				{ 0},							// end
-			}
-		},
-
-		{	// Guatemala
-			"GT",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,   17, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,   24, BOTH, FALSE},	// 5G, ch 52~64
-				{ 149,  4,  30, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Haiti
-			"HT",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,   17, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,   24, BOTH, FALSE},	// 5G, ch 52~64
-				{ 149,  4,  30, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Honduras
-			"HN",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 149,  4,  27, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Hong Kong
-			"HK",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  23, IDOR, FALSE},	// 5G, ch 52~64
-				{ 149,  4,  30, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Hungary
-			"HU",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 0},							// end
-			}
-		},
-
-		{	// Iceland
-			"IS",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// India
-			"IN",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 149, 	4,  24, IDOR, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Indonesia
-			"ID",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 149, 	4,  27, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Ireland
-			"IE",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36, 	4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52, 	4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, ODOR, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Israel
-			"IL",
-			CE,
-			{
-				{ 1,    3,  20, IDOR, FALSE},	// 2.4 G, ch 1~3
-				{ 4, 	6,  20, BOTH, FALSE},	// 2.4 G, ch 4~9
-				{ 10, 	4,  20, IDOR, FALSE},	// 2.4 G, ch 10~13
-				{ 0},							// end
-			}
-		},
-
-		{	// Italy
-			"IT",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36, 	4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52, 	4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, ODOR, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Japan
-			"JP",
-			JAP,
-			{
-				{ 1,   14,  20, BOTH, FALSE},	// 2.4 G, ch 1~14
-				{ 36, 	4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 0},							// end
-			}
-		},
-
-		{	// Jordan
-			"JO",
-			CE,
-			{
-				{ 1,   13,  20, IDOR, FALSE},	// 2.4 G, ch 1~13
-				{ 36, 	4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 149, 	4,  23, IDOR, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Latvia
-			"LV",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36, 	4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52, 	4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Liechtenstein
-			"LI",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 52, 	4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Lithuania
-			"LT",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36, 	4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52, 	4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Luxemburg
-			"LU",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36, 	4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52, 	4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Malaysia
-			"MY",
-			CE,
-			{
-				{ 36, 	4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52, 	4,  23, BOTH, FALSE},	// 5G, ch 52~64
-				{ 149,  5,  20, BOTH, FALSE},	// 5G, ch 149~165
-				{ 0},							// end
-			}
-		},
-
-		{	// Malta
-			"MT",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36, 	4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52, 	4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Marocco
-			"MA",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36, 	4,  24, IDOR, FALSE},	// 5G, ch 36~48
-				{ 0},							// end
-			}
-		},
-
-		{	// Mexico
-			"MX",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36, 	4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52, 	4,  24, BOTH, FALSE},	// 5G, ch 52~64
-				{ 149,  5,  30, IDOR, FALSE},	// 5G, ch 149~165
-				{ 0},							// end
-			}
-		},
-
-		{	// Netherlands
-			"NL",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36, 	4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52, 	4,  24, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// New Zealand
-			"NZ",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36, 	4,  24, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52, 	4,  24, BOTH, FALSE},	// 5G, ch 52~64
-				{ 149,  4,  30, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Norway
-			"NO",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36, 	4,  24, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52, 	4,  24, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Peru
-			"PE",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 149,  4,  27, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Portugal
-			"PT",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Poland
-			"PL",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Romania
-			"RO",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Russia
-			"RU",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 149,  4,  20, IDOR, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Saudi Arabia
-			"SA",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  23, BOTH, FALSE},	// 5G, ch 52~64
-				{ 149,  4,  23, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Serbia_and_Montenegro
-			"CS",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 0},							// end
-			}
-		},
-
-		{	// Singapore
-			"SG",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  23, BOTH, FALSE},	// 5G, ch 52~64
-				{ 149,  4,  20, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Slovakia
-			"SK",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Slovenia
-			"SI",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 0},							// end
-			}
-		},
-
-		{	// South Africa
-			"ZA",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  23, IDOR, FALSE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 149,  4,  30, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// South Korea
-			"KR",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  20, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  20, BOTH, FALSE},	// 5G, ch 52~64
-				{ 100,  8,  20, BOTH, FALSE},	// 5G, ch 100~128
-				{ 149,  4,  20, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Spain
-			"ES",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  17, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Sweden
-			"SE",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Switzerland
-			"CH",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  23, IDOR, TRUE},	// 5G, ch 36~48
-				{ 52,   4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 0},							// end
-			}
-		},
-
-		{	// Taiwan
-			"TW",
-			CE,
-			{
-				{ 1,   11,  30, BOTH, FALSE},	// 2.4 G, ch 1~11
-				{ 52,   4,  23, IDOR, FALSE},	// 5G, ch 52~64
-				{ 0},							// end
-			}
-		},
-
-		{	// Turkey
-			"TR",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~11
-				{ 36,   4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  23, BOTH, FALSE},	// 5G, ch 52~64
-				{ 0},							// end
-			}
-		},
-
-		{	// UK
-			"GB",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~11
-				{ 36,   4,  23, IDOR, FALSE},	// 5G, ch 52~64
-				{ 52,   4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Ukraine
-			"UA",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~11
-				{ 0},							// end
-			}
-		},
-
-		{	// United_Arab_Emirates
-			"AE",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~11
-				{ 0},							// end
-			}
-		},
-
-		{	// United_States
-			"US",
-			CE,
-			{
-				{ 1,   11,  30, BOTH, FALSE},	// 2.4 G, ch 1~11
-				{ 36,   4,  17, IDOR, FALSE},	// 5G, ch 52~64
-				{ 52,   4,  24, BOTH, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 149,  5,  30, BOTH, FALSE},	// 5G, ch 149~165
-				{ 0},							// end
-			}
-		},
-
-		{	// Venezuela
-			"VE",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~11
-				{ 149,  4,  27, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Default
-			"",
-			CE,
-			{
-				{ 1,   11,  20, BOTH, FALSE},	// 2.4 G, ch 1~11
-				{ 36,   4,  20, BOTH, FALSE},	// 5G, ch 52~64
-				{ 52,   4,  20, BOTH, FALSE},	// 5G, ch 52~64
-				{ 100, 11,  20, BOTH, FALSE},	// 5G, ch 100~140
-				{ 149,  5,  20, BOTH, FALSE},	// 5G, ch 149~165
-				{ 0},							// end
-			}
-		},
-};
-
-static inline PCH_REGION GetChRegion(
-	IN PUCHAR CntryCode)
-{
-	INT loop = 0;
-	PCH_REGION pChRegion = NULL;
-
-	while (strcmp(ChRegion[loop].CountReg, "") != 0)
-	{
-		if (strncmp(ChRegion[loop].CountReg, CntryCode, 2) == 0)
-		{
-			pChRegion = &ChRegion[loop];
-			break;
-		}
-		loop++;
-	}
-
-	if (pChRegion == NULL)
-		pChRegion = &ChRegion[loop];
-	return pChRegion;
-}
-
-static inline VOID ChBandCheck(
-	IN UCHAR PhyMode,
-	OUT PUCHAR pChType)
-{
-	switch(PhyMode)
-	{
-		case PHY_11A:
-#ifdef DOT11_N_SUPPORT
-		case PHY_11AN_MIXED:
-#endif // DOT11_N_SUPPORT //
-			*pChType = BAND_5G;
-			break;
-		case PHY_11ABG_MIXED:
-#ifdef DOT11_N_SUPPORT
-		case PHY_11AGN_MIXED:
-		case PHY_11ABGN_MIXED:
-#endif // DOT11_N_SUPPORT //
-			*pChType = BAND_BOTH;
-			break;
-
-		default:
-			*pChType = BAND_24G;
-			break;
-	}
-}
-
-static inline UCHAR FillChList(
-	IN PRTMP_ADAPTER pAd,
-	IN PCH_DESP pChDesp,
-	IN UCHAR Offset,
-	IN UCHAR increment)
-{
-	INT i, j, l;
-	UCHAR channel;
-
-	j = Offset;
-	for (i = 0; i < pChDesp->NumOfCh; i++)
-	{
-		channel = pChDesp->FirstChannel + i * increment;
-		for (l=0; l<MAX_NUM_OF_CHANNELS; l++)
-		{
-			if (channel == pAd->TxPower[l].Channel)
-			{
-				pAd->ChannelList[j].Power = pAd->TxPower[l].Power;
-				pAd->ChannelList[j].Power2 = pAd->TxPower[l].Power2;
-				break;
-			}
-		}
-		if (l == MAX_NUM_OF_CHANNELS)
-			continue;
-
-		pAd->ChannelList[j].Channel = pChDesp->FirstChannel + i * increment;
-		pAd->ChannelList[j].MaxTxPwr = pChDesp->MaxTxPwr;
-		pAd->ChannelList[j].DfsReq = pChDesp->DfsReq;
-		j++;
-	}
-	pAd->ChannelListNum = j;
-
-	return j;
-}
-
-static inline VOID CreateChList(
-	IN PRTMP_ADAPTER pAd,
-	IN PCH_REGION pChRegion,
-	IN UCHAR Geography)
-{
-	INT i;
-	UCHAR offset = 0;
-	PCH_DESP pChDesp;
-	UCHAR ChType;
-	UCHAR increment;
-
-	if (pChRegion == NULL)
-		return;
-
-	ChBandCheck(pAd->CommonCfg.PhyMode, &ChType);
-
-	for (i=0; i<10; i++)
-	{
-		pChDesp = &pChRegion->ChDesp[i];
-		if (pChDesp->FirstChannel == 0)
-			break;
-
-		if (ChType == BAND_5G)
-		{
-			if (pChDesp->FirstChannel <= 14)
-				continue;
-		}
-		else if (ChType == BAND_24G)
-		{
-			if (pChDesp->FirstChannel > 14)
-				continue;
-		}
-
-		if ((pChDesp->Geography == BOTH)
-			|| (pChDesp->Geography == Geography))
-        {
-			if (pChDesp->FirstChannel > 14)
-                increment = 4;
-            else
-                increment = 1;
-			offset = FillChList(pAd, pChDesp, offset, increment);
-        }
-	}
-}
-
-static inline VOID BuildChannelListEx(
-	IN PRTMP_ADAPTER pAd)
-{
-	PCH_REGION pChReg;
-
-	pChReg = GetChRegion(pAd->CommonCfg.CountryCode);
-	CreateChList(pAd, pChReg, pAd->CommonCfg.Geography);
-}
-
-static inline VOID BuildBeaconChList(
-	IN PRTMP_ADAPTER pAd,
-	OUT PUCHAR pBuf,
-	OUT	PULONG pBufLen)
-{
-	INT i;
-	ULONG TmpLen;
-	PCH_REGION pChRegion;
-	PCH_DESP pChDesp;
-	UCHAR ChType;
-
-	pChRegion = GetChRegion(pAd->CommonCfg.CountryCode);
-
-	if (pChRegion == NULL)
-		return;
-
-	ChBandCheck(pAd->CommonCfg.PhyMode, &ChType);
-	*pBufLen = 0;
-
-	for (i=0; i<10; i++)
-	{
-		pChDesp = &pChRegion->ChDesp[i];
-		if (pChDesp->FirstChannel == 0)
-			break;
-
-		if (ChType == BAND_5G)
-		{
-			if (pChDesp->FirstChannel <= 14)
-				continue;
-		}
-		else if (ChType == BAND_24G)
-		{
-			if (pChDesp->FirstChannel > 14)
-				continue;
-		}
-
-		if ((pChDesp->Geography == BOTH)
-			|| (pChDesp->Geography == pAd->CommonCfg.Geography))
-		{
-			MakeOutgoingFrame(pBuf + *pBufLen,		&TmpLen,
-								1,                 	&pChDesp->FirstChannel,
-								1,                 	&pChDesp->NumOfCh,
-								1,                 	&pChDesp->MaxTxPwr,
-								END_OF_ARGS);
-			*pBufLen += TmpLen;
-		}
-	}
-}
-
-
-#ifdef DOT11_N_SUPPORT
-static inline BOOLEAN IsValidChannel(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR channel)
-
-{
-	INT i;
-
-	for (i = 0; i < pAd->ChannelListNum; i++)
-	{
-		if (pAd->ChannelList[i].Channel == channel)
-			break;
-	}
-
-	if (i == pAd->ChannelListNum)
-		return FALSE;
-	else
-		return TRUE;
-}
-
-
-static inline UCHAR GetExtCh(
-	IN UCHAR Channel,
-	IN UCHAR Direction)
-{
-	CHAR ExtCh;
-
-	if (Direction == EXTCHA_ABOVE)
-		ExtCh = Channel + 4;
-	else
-		ExtCh = (Channel - 4) > 0 ? (Channel - 4) : 0;
-
-	return ExtCh;
-}
-
-
-static inline VOID N_ChannelCheck(
-	IN PRTMP_ADAPTER pAd)
-{
-	//UCHAR ChannelNum = pAd->ChannelListNum;
-	UCHAR Channel = pAd->CommonCfg.Channel;
-
-	if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) && (pAd->CommonCfg.RegTransmitSetting.field.BW  == BW_40))
-	{
-		if (Channel > 14)
-		{
-			if ((Channel == 36) || (Channel == 44) || (Channel == 52) || (Channel == 60) || (Channel == 100) || (Channel == 108) ||
-			    (Channel == 116) || (Channel == 124) || (Channel == 132) || (Channel == 149) || (Channel == 157))
-			{
-				pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_ABOVE;
-			}
-			else if ((Channel == 40) || (Channel == 48) || (Channel == 56) || (Channel == 64) || (Channel == 104) || (Channel == 112) ||
-					(Channel == 120) || (Channel == 128) || (Channel == 136) || (Channel == 153) || (Channel == 161))
-			{
-				pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_BELOW;
-			}
-			else
-			{
-				pAd->CommonCfg.RegTransmitSetting.field.BW  = BW_20;
-			}
-		}
-		else
-		{
-			do
-			{
-				UCHAR ExtCh;
-				UCHAR Dir = pAd->CommonCfg.RegTransmitSetting.field.EXTCHA;
-				ExtCh = GetExtCh(Channel, Dir);
-				if (IsValidChannel(pAd, ExtCh))
-					break;
-
-				Dir = (Dir == EXTCHA_ABOVE) ? EXTCHA_BELOW : EXTCHA_ABOVE;
-				ExtCh = GetExtCh(Channel, Dir);
-				if (IsValidChannel(pAd, ExtCh))
-				{
-					pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = Dir;
-					break;
-				}
-				pAd->CommonCfg.RegTransmitSetting.field.BW  = BW_20;
-			} while(FALSE);
-
-			if (Channel == 14)
-			{
-				pAd->CommonCfg.RegTransmitSetting.field.BW  = BW_20;
-				//pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_NONE;	// We didn't set the ExtCh as NONE due to it'll set in RTMPSetHT()
-			}
-#if 0
-			switch (pAd->CommonCfg.CountryRegion  & 0x7f)
-			{
-				case REGION_0_BG_BAND:	// 1 -11
-				case REGION_1_BG_BAND:	// 1 - 13
-				case REGION_5_BG_BAND:	// 1 - 14
-					if (Channel <= 4)
-					{
-						pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_ABOVE;
-					}
-					else if (Channel >= 8)
-					{
-						if ((ChannelNum - Channel) < 4)
-							pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_BELOW;
-					}
-					break;
-
-				case REGION_2_BG_BAND:	// 10 - 11
-				case REGION_3_BG_BAND:	// 10 - 13
-				case REGION_4_BG_BAND:	// 14
-					pAd->CommonCfg.RegTransmitSetting.field.BW  = BW_20;
-					break;
-
-				case REGION_6_BG_BAND:	// 3 - 9
-					if (Channel <= 5)
-						pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_ABOVE;
-					else if (Channel == 6)
-						pAd->CommonCfg.RegTransmitSetting.field.BW  = BW_20;
-					else if (Channel >= 7)
-						pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_BELOW;
-					break;
-
-				case REGION_7_BG_BAND:  // 5 - 13
-					if (Channel <= 8)
-						pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_ABOVE;
-					else if (Channel >= 10)
-						pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_BELOW;
-					break;
-
-				default:	// Error. should never happen
-					break;
-			}
-#endif
-		}
-	}
-
-
-}
-
-
-static inline VOID N_SetCenCh(
-	IN PRTMP_ADAPTER pAd)
-{
-	if (pAd->CommonCfg.RegTransmitSetting.field.BW == BW_40)
-	{
-		if (pAd->CommonCfg.RegTransmitSetting.field.EXTCHA == EXTCHA_ABOVE)
-		{
-			pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel + 2;
-		}
-		else
-		{
-			if (pAd->CommonCfg.Channel == 14)
-				pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel - 1;
-			else
-				pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel - 2;
-		}
-	}
-	else
-	{
-		pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel;
-	}
-}
-#endif // DOT11_N_SUPPORT //
-
-
-static inline UINT8 GetCuntryMaxTxPwr(
-	IN PRTMP_ADAPTER pAd,
-	IN UINT8 channel)
-{
-	int i;
-	for (i = 0; i < pAd->ChannelListNum; i++)
-	{
-		if (pAd->ChannelList[i].Channel == channel)
-			break;
-	}
-
-	if (i == pAd->ChannelListNum)
-		return 0xff;
-	else
-		return pAd->ChannelList[i].MaxTxPwr;
-}
-#endif // __CHLIST_H__
-
+#include "../rt2860/chlist.h"
diff --git a/drivers/staging/rt2870/common/2870_rtmp_init.c b/drivers/staging/rt2870/common/2870_rtmp_init.c
index cb16d2fcf60..0f4c8af97e4 100644
--- a/drivers/staging/rt2870/common/2870_rtmp_init.c
+++ b/drivers/staging/rt2870/common/2870_rtmp_init.c
@@ -266,27 +266,6 @@ NDIS_STATUS	NICInitTransmit(
 		//
 		// MGMT_RING_SIZE
 		//
-#if 0
-		for(i=0; i<MGMT_RING_SIZE; i++) // 8
-		{
-			PTX_CONTEXT	pMLMEContext = &(pAd->MLMEContext[i]);
-
-
-			NdisZeroMemory(pMLMEContext, sizeof(TX_CONTEXT));
-
-			//Allocate URB
-			LM_USB_ALLOC(pObj, pMLMEContext, PTX_BUFFER, sizeof(TX_BUFFER), Status,
-							("<-- ERROR in Alloc TX MLMEContext[%d] urb!! \n", i),
-							out2,
-							("<-- ERROR in Alloc TX MLMEContext[%d] TX_BUFFER !! \n", i),
-							out2);
-
-			pMLMEContext->pAd = pAd;
-			pMLMEContext->pIrp = NULL;
-			pMLMEContext->InUse = FALSE;
-			pMLMEContext->IRPPending = FALSE;
-		}
-#else
 		// Allocate MGMT ring descriptor's memory
 		pAd->MgmtDescRing.AllocSize = MGMT_RING_SIZE * sizeof(TX_CONTEXT);
 		RTMPAllocateMemory(&pAd->MgmtDescRing.AllocVa, pAd->MgmtDescRing.AllocSize);
@@ -336,7 +315,6 @@ NDIS_STATUS	NICInitTransmit(
 		pAd->MgmtRing.TxSwFreeIdx = MGMT_RING_SIZE;
 		pAd->MgmtRing.TxCpuIdx = 0;
 		pAd->MgmtRing.TxDmaIdx = 0;
-#endif
 
 		//
 		// BEACON_RING_SIZE
@@ -518,10 +496,6 @@ NDIS_STATUS	RTMPAllocTxRxRingMemory(
 			NdisAllocateSpinLock(&pAd->TxContextQueueLock[num]);
 		}
 
-#ifdef RALINK_ATE
-		NdisAllocateSpinLock(&pAd->GenericLock);
-#endif // RALINK_ATE //
-
 //		NdisAllocateSpinLock(&pAd->MemLock);	// Not used in RT28XX
 
 //		NdisAllocateSpinLock(&pAd->MacTabLock); // init it in UserCfgInit()
@@ -665,7 +639,7 @@ VOID	RTMPFreeTxRxRingMemory(
 
 
 	// Free Tx frame resource
-	for (acidx = 0; acidx < 4; acidx++)
+		for(acidx=0; acidx<4; acidx++)
 		{
 		PHT_TX_CONTEXT pHTTXContext = &(pAd->TxContext[acidx]);
 			if (pHTTXContext)
@@ -684,9 +658,7 @@ VOID	RTMPFreeTxRxRingMemory(
 	NdisFreeSpinLock(&pAd->MLMEBulkOutLock);
 
 	NdisFreeSpinLock(&pAd->CmdQLock);
-#ifdef RALINK_ATE
-	NdisFreeSpinLock(&pAd->GenericLock);
-#endif // RALINK_ATE //
+
 	// Clear all pending bulk-out request flags.
 	RTUSB_CLEAR_BULK_FLAG(pAd, 0xffffffff);
 
@@ -727,9 +699,14 @@ NDIS_STATUS AdapterBlockAllocateMemory(
 
 	usb_dev = pObj->pUsb_Dev;
 
+#ifndef RT30xx
 	pObj->MLMEThr_task		= NULL;
 	pObj->RTUSBCmdThr_task	= NULL;
-
+#endif
+#ifdef RT30xx
+	pObj->MLMEThr_pid	= NULL;
+	pObj->RTUSBCmdThr_pid	= NULL;
+#endif
 	*ppAd = (PVOID)vmalloc(sizeof(RTMP_ADAPTER));
 
 	if (*ppAd)
@@ -765,7 +742,12 @@ NDIS_STATUS	 CreateThreads(
 {
 	PRTMP_ADAPTER pAd = net_dev->ml_priv;
 	POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;
+#ifndef RT30xx
 	struct task_struct *tsk;
+#endif
+#ifdef RT30xx
+	pid_t pid_number;
+#endif
 
 	//init_MUTEX(&(pAd->usbdev_semaphore));
 
@@ -779,39 +761,76 @@ NDIS_STATUS	 CreateThreads(
 	init_completion (&pAd->TimerQComplete);
 
 	// Creat MLME Thread
+#ifndef RT30xx
 	pObj->MLMEThr_task = NULL;
-	tsk = kthread_run(MlmeThread, pAd, pAd->net_dev->name);
+	tsk = kthread_run(MlmeThread, pAd, "%s", pAd->net_dev->name);
 
 	if (IS_ERR(tsk)) {
+#endif
+#ifdef RT30xx
+	pObj->MLMEThr_pid = NULL;
+	pid_number = kernel_thread(MlmeThread, pAd, CLONE_VM);
+	if (pid_number < 0)
+	{
+#endif
 		printk (KERN_WARNING "%s: unable to start Mlme thread\n",pAd->net_dev->name);
 		return NDIS_STATUS_FAILURE;
 	}
 
+#ifndef RT30xx
 	pObj->MLMEThr_task = tsk;
+#endif
+#ifdef RT30xx
+	pObj->MLMEThr_pid = find_get_pid(pid_number);
+#endif
 	// Wait for the thread to start
 	wait_for_completion(&(pAd->mlmeComplete));
 
 	// Creat Command Thread
+#ifndef RT30xx
 	pObj->RTUSBCmdThr_task = NULL;
-	tsk = kthread_run(RTUSBCmdThread, pAd, pAd->net_dev->name);
+	tsk = kthread_run(RTUSBCmdThread, pAd, "%s", pAd->net_dev->name);
 
 	if (IS_ERR(tsk) < 0)
+#endif
+#ifdef RT30xx
+	pObj->RTUSBCmdThr_pid = NULL;
+	pid_number = kernel_thread(RTUSBCmdThread, pAd, CLONE_VM);
+	if (pid_number < 0)
+#endif
 	{
 		printk (KERN_WARNING "%s: unable to start RTUSBCmd thread\n",pAd->net_dev->name);
 		return NDIS_STATUS_FAILURE;
 	}
 
+#ifndef RT30xx
 	pObj->RTUSBCmdThr_task = tsk;
+#endif
+#ifdef RT30xx
+	pObj->RTUSBCmdThr_pid = find_get_pid(pid_number);
+#endif
 	wait_for_completion(&(pAd->CmdQComplete));
 
+#ifndef RT30xx
 	pObj->TimerQThr_task = NULL;
-	tsk = kthread_run(TimerQThread, pAd, pAd->net_dev->name);
+	tsk = kthread_run(TimerQThread, pAd, "%s", pAd->net_dev->name);
 	if (IS_ERR(tsk) < 0)
+#endif
+#ifdef RT30xx
+	pObj->TimerQThr_pid = NULL;
+	pid_number = kernel_thread(TimerQThread, pAd, CLONE_VM);
+	if (pid_number < 0)
+#endif
 	{
 		printk (KERN_WARNING "%s: unable to start TimerQThread\n",pAd->net_dev->name);
 		return NDIS_STATUS_FAILURE;
 	}
+#ifndef RT30xx
 	pObj->TimerQThr_task = tsk;
+#endif
+#ifdef RT30xx
+	pObj->TimerQThr_pid = find_get_pid(pid_number);
+#endif
 	// Wait for the thread to start
 	wait_for_completion(&(pAd->TimerQComplete));
 
@@ -831,8 +850,6 @@ NDIS_STATUS	 CreateThreads(
 	return NDIS_STATUS_SUCCESS;
 }
 
-
-#ifdef CONFIG_STA_SUPPORT
 /*
 ========================================================================
 Routine Description:
@@ -1013,7 +1030,6 @@ VOID	RTMPAddBSSIDCipher(
 		DBGPRINT_RAW(RT_DEBUG_TRACE,(" %x:", pKey->KeyMaterial[i]));
 	DBGPRINT(RT_DEBUG_TRACE,("	 \n"));
 }
-#endif // CONFIG_STA_SUPPORT //
 
 /*
 ========================================================================
@@ -1084,18 +1100,13 @@ PNDIS_PACKET GetPacketFromRxRing(
 	// skip USB frame length field
 	pData += RT2870_RXDMALEN_FIELD_SIZE;
 	pRxWI = (PRXWI_STRUC)pData;
-#ifdef RT_BIG_ENDIAN
-	RTMPWIEndianChange(pData, TYPE_RXWI);
-#endif // RT_BIG_ENDIAN //
+
 	if (pRxWI->MPDUtotalByteCount > ThisFrameLen)
 	{
 		DBGPRINT(RT_DEBUG_ERROR, ("%s():pRxWIMPDUtotalByteCount(%d) large than RxDMALen(%ld)\n",
 									__func__, pRxWI->MPDUtotalByteCount, ThisFrameLen));
 		goto label_null;
 	}
-#ifdef RT_BIG_ENDIAN
-	RTMPWIEndianChange(pData, TYPE_RXWI);
-#endif // RT_BIG_ENDIAN //
 
 	// allocate a rx packet
 	pSkb = dev_alloc_skb(ThisFrameLen);
@@ -1112,9 +1123,6 @@ PNDIS_PACKET GetPacketFromRxRing(
 
 	// copy RxD
 	*pSaveRxD = *(PRXINFO_STRUC)(pData + ThisFrameLen);
-#ifdef RT_BIG_ENDIAN
-	RTMPDescriptorEndianChange((PUCHAR)pSaveRxD, TYPE_RXINFO);
-#endif // RT_BIG_ENDIAN //
 
 	// update next packet read position.
 	pAd->ReadPosition += (ThisFrameLen + RT2870_RXDMALEN_FIELD_SIZE + RXINFO_SIZE);	// 8 for (RT2870_RXDMALEN_FIELD_SIZE + sizeof(RXINFO_STRUC))
@@ -1197,17 +1205,6 @@ static void rx_done_tasklet(unsigned long data)
 
 	ASSERT((pRxContext->InUse == pRxContext->IRPPending));
 
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-    {
-		// If the driver is in ATE mode and Rx frame is set into here.
-		if (pAd->ContinBulkIn == TRUE)
-		{
-			RTUSBBulkReceive(pAd);
-		}
-	}
-	else
-#endif // RALINK_ATE //
 	RTUSBBulkReceive(pAd);
 
 	return;
@@ -1310,9 +1307,9 @@ static void rt2870_hcca_dma_done_tasklet(unsigned long data)
 	UCHAR				BulkOutPipeId = 4;
 	purbb_t				pUrb;
 
-
+#ifndef RT30xx
 	DBGPRINT_RAW(RT_DEBUG_ERROR, ("--->hcca_dma_done_tasklet\n"));
-
+#endif
 
 	pUrb			= (purbb_t)data;
 	pHTTXContext	= (PHT_TX_CONTEXT)pUrb->context;
@@ -1342,13 +1339,19 @@ static void rt2870_hcca_dma_done_tasklet(unsigned long data)
 				RTMPDeQueuePacket(pAd, FALSE, BulkOutPipeId, MAX_TX_PROCESS);
 			}
 
+#ifndef RT30xx
 			RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL);
+#endif
+#ifdef RT30xx
+			RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL<<4);
+#endif
 			RTUSBKickBulkOut(pAd);
 		}
 	}
 
+#ifndef RT30xx
 	DBGPRINT_RAW(RT_DEBUG_ERROR, ("<---hcca_dma_done_tasklet\n"));
-
+#endif
 		return;
 }
 
diff --git a/drivers/staging/rt2870/common/action.c b/drivers/staging/rt2870/common/action.c
index 3a48a7f5e2b..fd806c3871a 100644
--- a/drivers/staging/rt2870/common/action.c
+++ b/drivers/staging/rt2870/common/action.c
@@ -1,1046 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-	action.c
-
-    Abstract:
-    Handle association related requests either from WSTA or from local MLME
-
-    Revision History:
-    Who         When          What
-    --------    ----------    ----------------------------------------------
-	Jan Lee		2006	  	created for rt2860
- */
-
-#include "../rt_config.h"
-#include "action.h"
-
-
-static VOID ReservedAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-/*
-    ==========================================================================
-    Description:
-        association state machine init, including state transition and timer init
-    Parameters:
-        S - pointer to the association state machine
-    Note:
-        The state machine looks like the following
-
-                                    ASSOC_IDLE
-        MT2_MLME_DISASSOC_REQ    mlme_disassoc_req_action
-        MT2_PEER_DISASSOC_REQ    peer_disassoc_action
-        MT2_PEER_ASSOC_REQ       drop
-        MT2_PEER_REASSOC_REQ     drop
-        MT2_CLS3ERR              cls3err_action
-    ==========================================================================
- */
-VOID ActionStateMachineInit(
-    IN	PRTMP_ADAPTER	pAd,
-    IN  STATE_MACHINE *S,
-    OUT STATE_MACHINE_FUNC Trans[])
-{
-	StateMachineInit(S, (STATE_MACHINE_FUNC *)Trans, MAX_ACT_STATE, MAX_ACT_MSG, (STATE_MACHINE_FUNC)Drop, ACT_IDLE, ACT_MACHINE_BASE);
-
-	StateMachineSetAction(S, ACT_IDLE, MT2_PEER_SPECTRUM_CATE, (STATE_MACHINE_FUNC)PeerSpectrumAction);
-	StateMachineSetAction(S, ACT_IDLE, MT2_PEER_QOS_CATE, (STATE_MACHINE_FUNC)PeerQOSAction);
-
-	StateMachineSetAction(S, ACT_IDLE, MT2_PEER_DLS_CATE, (STATE_MACHINE_FUNC)ReservedAction);
-#ifdef QOS_DLS_SUPPORT
-		StateMachineSetAction(S, ACT_IDLE, MT2_PEER_DLS_CATE, (STATE_MACHINE_FUNC)PeerDLSAction);
-#endif // QOS_DLS_SUPPORT //
-
-#ifdef DOT11_N_SUPPORT
-	StateMachineSetAction(S, ACT_IDLE, MT2_PEER_BA_CATE, (STATE_MACHINE_FUNC)PeerBAAction);
-	StateMachineSetAction(S, ACT_IDLE, MT2_PEER_HT_CATE, (STATE_MACHINE_FUNC)PeerHTAction);
-	StateMachineSetAction(S, ACT_IDLE, MT2_MLME_ADD_BA_CATE, (STATE_MACHINE_FUNC)MlmeADDBAAction);
-	StateMachineSetAction(S, ACT_IDLE, MT2_MLME_ORI_DELBA_CATE, (STATE_MACHINE_FUNC)MlmeDELBAAction);
-	StateMachineSetAction(S, ACT_IDLE, MT2_MLME_REC_DELBA_CATE, (STATE_MACHINE_FUNC)MlmeDELBAAction);
-#endif // DOT11_N_SUPPORT //
-
-	StateMachineSetAction(S, ACT_IDLE, MT2_PEER_PUBLIC_CATE, (STATE_MACHINE_FUNC)PeerPublicAction);
-	StateMachineSetAction(S, ACT_IDLE, MT2_PEER_RM_CATE, (STATE_MACHINE_FUNC)PeerRMAction);
-
-	StateMachineSetAction(S, ACT_IDLE, MT2_MLME_QOS_CATE, (STATE_MACHINE_FUNC)MlmeQOSAction);
-	StateMachineSetAction(S, ACT_IDLE, MT2_MLME_DLS_CATE, (STATE_MACHINE_FUNC)MlmeDLSAction);
-	StateMachineSetAction(S, ACT_IDLE, MT2_ACT_INVALID, (STATE_MACHINE_FUNC)MlmeInvalidAction);
-}
-
-#ifdef DOT11_N_SUPPORT
-VOID MlmeADDBAAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-
-{
-	MLME_ADDBA_REQ_STRUCT *pInfo;
-	UCHAR           Addr[6];
-	PUCHAR         pOutBuffer = NULL;
-	NDIS_STATUS     NStatus;
-	ULONG		Idx;
-	FRAME_ADDBA_REQ  Frame;
-	ULONG		FrameLen;
-	BA_ORI_ENTRY			*pBAEntry = NULL;
-
-	pInfo = (MLME_ADDBA_REQ_STRUCT *)Elem->Msg;
-	NdisZeroMemory(&Frame, sizeof(FRAME_ADDBA_REQ));
-
-	if(MlmeAddBAReqSanity(pAd, Elem->Msg, Elem->MsgLen, Addr))
-	{
-		NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-		if(NStatus != NDIS_STATUS_SUCCESS)
-		{
-			DBGPRINT(RT_DEBUG_TRACE,("BA - MlmeADDBAAction() allocate memory failed \n"));
-			return;
-		}
-		// 1. find entry
-		Idx = pAd->MacTab.Content[pInfo->Wcid].BAOriWcidArray[pInfo->TID];
-		if (Idx == 0)
-		{
-			MlmeFreeMemory(pAd, pOutBuffer);
-			DBGPRINT(RT_DEBUG_ERROR,("BA - MlmeADDBAAction() can't find BAOriEntry \n"));
-			return;
-		}
-		else
-		{
-			pBAEntry =&pAd->BATable.BAOriEntry[Idx];
-		}
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			if (ADHOC_ON(pAd))
-				ActHeaderInit(pAd, &Frame.Hdr, pInfo->pAddr, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
-			else
-#ifdef QOS_DLS_SUPPORT
-			if (pAd->MacTab.Content[pInfo->Wcid].ValidAsDls)
-				ActHeaderInit(pAd, &Frame.Hdr, pInfo->pAddr, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
-			else
-#endif // QOS_DLS_SUPPORT //
-				ActHeaderInit(pAd, &Frame.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pInfo->pAddr);
-
-		}
-#endif // CONFIG_STA_SUPPORT //
-
-		Frame.Category = CATEGORY_BA;
-		Frame.Action = ADDBA_REQ;
-		Frame.BaParm.AMSDUSupported = 0;
-		Frame.BaParm.BAPolicy = IMMED_BA;
-		Frame.BaParm.TID = pInfo->TID;
-		Frame.BaParm.BufSize = pInfo->BaBufSize;
-		Frame.Token = pInfo->Token;
-		Frame.TimeOutValue = pInfo->TimeOutValue;
-		Frame.BaStartSeq.field.FragNum = 0;
-		Frame.BaStartSeq.field.StartSeq = pAd->MacTab.Content[pInfo->Wcid].TxSeq[pInfo->TID];
-
-		*(USHORT *)(&Frame.BaParm) = cpu2le16(*(USHORT *)(&Frame.BaParm));
-		Frame.TimeOutValue = cpu2le16(Frame.TimeOutValue);
-		Frame.BaStartSeq.word = cpu2le16(Frame.BaStartSeq.word);
-
-		MakeOutgoingFrame(pOutBuffer,		   &FrameLen,
-		              sizeof(FRAME_ADDBA_REQ), &Frame,
-		              END_OF_ARGS);
-		MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-		MlmeFreeMemory(pAd, pOutBuffer);
-
-		DBGPRINT(RT_DEBUG_TRACE, ("BA - Send ADDBA request. StartSeq = %x,  FrameLen = %ld. BufSize = %d\n", Frame.BaStartSeq.field.StartSeq, FrameLen, Frame.BaParm.BufSize));
-    }
-}
-
-/*
-    ==========================================================================
-    Description:
-        send DELBA and delete BaEntry if any
-    Parametrs:
-        Elem - MLME message MLME_DELBA_REQ_STRUCT
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID MlmeDELBAAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-	MLME_DELBA_REQ_STRUCT *pInfo;
-	PUCHAR         pOutBuffer = NULL;
-	PUCHAR		   pOutBuffer2 = NULL;
-	NDIS_STATUS     NStatus;
-	ULONG		Idx;
-	FRAME_DELBA_REQ  Frame;
-	ULONG		FrameLen;
-	FRAME_BAR	FrameBar;
-
-	pInfo = (MLME_DELBA_REQ_STRUCT *)Elem->Msg;
-	// must send back DELBA
-	NdisZeroMemory(&Frame, sizeof(FRAME_DELBA_REQ));
-	DBGPRINT(RT_DEBUG_TRACE, ("==> MlmeDELBAAction(), Initiator(%d) \n", pInfo->Initiator));
-
-	if(MlmeDelBAReqSanity(pAd, Elem->Msg, Elem->MsgLen))
-	{
-		NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-		if(NStatus != NDIS_STATUS_SUCCESS)
-		{
-			DBGPRINT(RT_DEBUG_ERROR,("BA - MlmeDELBAAction() allocate memory failed 1. \n"));
-			return;
-		}
-
-		NStatus = MlmeAllocateMemory(pAd, &pOutBuffer2);  //Get an unused nonpaged memory
-		if(NStatus != NDIS_STATUS_SUCCESS)
-		{
-			MlmeFreeMemory(pAd, pOutBuffer);
-			DBGPRINT(RT_DEBUG_ERROR, ("BA - MlmeDELBAAction() allocate memory failed 2. \n"));
-			return;
-		}
-
-		// SEND BAR (Send BAR to refresh peer reordering buffer.)
-		Idx = pAd->MacTab.Content[pInfo->Wcid].BAOriWcidArray[pInfo->TID];
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			BarHeaderInit(pAd, &FrameBar, pAd->MacTab.Content[pInfo->Wcid].Addr, pAd->CurrentAddress);
-#endif // CONFIG_STA_SUPPORT //
-
-		FrameBar.StartingSeq.field.FragNum = 0; // make sure sequence not clear in DEL funciton.
-		FrameBar.StartingSeq.field.StartSeq = pAd->MacTab.Content[pInfo->Wcid].TxSeq[pInfo->TID]; // make sure sequence not clear in DEL funciton.
-		FrameBar.BarControl.TID = pInfo->TID; // make sure sequence not clear in DEL funciton.
-		FrameBar.BarControl.ACKPolicy = IMMED_BA; // make sure sequence not clear in DEL funciton.
-		FrameBar.BarControl.Compressed = 1; // make sure sequence not clear in DEL funciton.
-		FrameBar.BarControl.MTID = 0; // make sure sequence not clear in DEL funciton.
-
-		MakeOutgoingFrame(pOutBuffer2,				&FrameLen,
-					  sizeof(FRAME_BAR),	  &FrameBar,
-					  END_OF_ARGS);
-		MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer2, FrameLen);
-		MlmeFreeMemory(pAd, pOutBuffer2);
-		DBGPRINT(RT_DEBUG_TRACE,("BA - MlmeDELBAAction() . Send BAR to refresh peer reordering buffer \n"));
-
-		// SEND DELBA FRAME
-		FrameLen = 0;
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			if (ADHOC_ON(pAd))
-				ActHeaderInit(pAd, &Frame.Hdr, pAd->MacTab.Content[pInfo->Wcid].Addr, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
-			else
-#ifdef QOS_DLS_SUPPORT
-			if (pAd->MacTab.Content[pInfo->Wcid].ValidAsDls)
-				ActHeaderInit(pAd, &Frame.Hdr, pAd->MacTab.Content[pInfo->Wcid].Addr, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
-			else
-#endif // QOS_DLS_SUPPORT //
-				ActHeaderInit(pAd, &Frame.Hdr,  pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->MacTab.Content[pInfo->Wcid].Addr);
-		}
-#endif // CONFIG_STA_SUPPORT //
-		Frame.Category = CATEGORY_BA;
-		Frame.Action = DELBA;
-		Frame.DelbaParm.Initiator = pInfo->Initiator;
-		Frame.DelbaParm.TID = pInfo->TID;
-		Frame.ReasonCode = 39; // Time Out
-		*(USHORT *)(&Frame.DelbaParm) = cpu2le16(*(USHORT *)(&Frame.DelbaParm));
-		Frame.ReasonCode = cpu2le16(Frame.ReasonCode);
-
-		MakeOutgoingFrame(pOutBuffer,               &FrameLen,
-		              sizeof(FRAME_DELBA_REQ),    &Frame,
-		              END_OF_ARGS);
-		MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-		MlmeFreeMemory(pAd, pOutBuffer);
-		DBGPRINT(RT_DEBUG_TRACE, ("BA - MlmeDELBAAction() . 3 DELBA sent. Initiator(%d)\n", pInfo->Initiator));
-    	}
-}
-#endif // DOT11_N_SUPPORT //
-
-VOID MlmeQOSAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-}
-
-VOID MlmeDLSAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-}
-
-VOID MlmeInvalidAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-	//PUCHAR		   pOutBuffer = NULL;
-	//Return the receiving frame except the MSB of category filed set to 1.  7.3.1.11
-}
-
-VOID PeerQOSAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-}
-
-#ifdef QOS_DLS_SUPPORT
-VOID PeerDLSAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR	Action = Elem->Msg[LENGTH_802_11+1];
-
-	switch(Action)
-	{
-		case ACTION_DLS_REQUEST:
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			PeerDlsReqAction(pAd, Elem);
-#endif // CONFIG_STA_SUPPORT //
-			break;
-
-		case ACTION_DLS_RESPONSE:
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			PeerDlsRspAction(pAd, Elem);
-#endif // CONFIG_STA_SUPPORT //
-			break;
-
-		case ACTION_DLS_TEARDOWN:
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			PeerDlsTearDownAction(pAd, Elem);
-#endif // CONFIG_STA_SUPPORT //
-			break;
-	}
-}
-#endif // QOS_DLS_SUPPORT //
-
-#ifdef DOT11_N_SUPPORT
-VOID PeerBAAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR	Action = Elem->Msg[LENGTH_802_11+1];
-
-	switch(Action)
-	{
-		case ADDBA_REQ:
-			PeerAddBAReqAction(pAd,Elem);
-			break;
-		case ADDBA_RESP:
-			PeerAddBARspAction(pAd,Elem);
-			break;
-		case DELBA:
-			PeerDelBAAction(pAd,Elem);
-			break;
-	}
-}
-
-
-#ifdef DOT11N_DRAFT3
-
-#ifdef CONFIG_STA_SUPPORT
-VOID StaPublicAction(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR Bss2040Coexist)
-{
-	BSS_2040_COEXIST_IE		BssCoexist;
-	MLME_SCAN_REQ_STRUCT			ScanReq;
-
-	BssCoexist.word = Bss2040Coexist;
-	// AP asks Station to return a 20/40 BSS Coexistence mgmt frame.  So we first starts a scan, then send back 20/40 BSS Coexistence mgmt frame
-	if ((BssCoexist.field.InfoReq == 1) && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_SCAN_2040)))
-	{
-		// Clear record first.  After scan , will update those bit and send back to transmiter.
-		pAd->CommonCfg.BSSCoexist2040.field.InfoReq = 1;
-		pAd->CommonCfg.BSSCoexist2040.field.Intolerant40 = 0;
-		pAd->CommonCfg.BSSCoexist2040.field.BSS20WidthReq = 0;
-		// Fill out stuff for scan request
-		ScanParmFill(pAd, &ScanReq, ZeroSsid, 0, BSS_ANY, SCAN_2040_BSS_COEXIST);
-		MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_SCAN_REQ, sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq);
-		pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_LIST_SCAN;
-	}
-}
-
-
-/*
-Description : Build Intolerant Channel Rerpot from Trigger event table.
-return : how many bytes copied.
-*/
-ULONG BuildIntolerantChannelRep(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    PUCHAR  pDest)
-{
-	ULONG			FrameLen = 0;
-	ULONG			ReadOffset = 0;
-	UCHAR			i;
-	UCHAR			LastRegClass = 0xff;
-	PUCHAR			pLen;
-
-	for ( i = 0;i < MAX_TRIGGER_EVENT;i++)
-	{
-		if (pAd->CommonCfg.TriggerEventTab.EventA[i].bValid == TRUE)
-		{
-			if (pAd->CommonCfg.TriggerEventTab.EventA[i].RegClass == LastRegClass)
-			{
-				*(pDest + ReadOffset) = (UCHAR)pAd->CommonCfg.TriggerEventTab.EventA[i].Channel;
-				*pLen++;
-				ReadOffset++;
-				FrameLen++;
-			}
-			else
-			{
-				*(pDest + ReadOffset) = IE_2040_BSS_INTOLERANT_REPORT;  // IE
-				*(pDest + ReadOffset + 1) = 2;	// Len = RegClass byte + channel byte.
-				pLen = pDest + ReadOffset + 1;
-				LastRegClass = pAd->CommonCfg.TriggerEventTab.EventA[i].RegClass;
-				*(pDest + ReadOffset + 2) = LastRegClass;	// Len = RegClass byte + channel byte.
-				*(pDest + ReadOffset + 3) = (UCHAR)pAd->CommonCfg.TriggerEventTab.EventA[i].Channel;
-				FrameLen += 4;
-				ReadOffset += 4;
-			}
-
-		}
-	}
-	return FrameLen;
-}
-
-
-/*
-Description : Send 20/40 BSS Coexistence Action frame If one trigger event is triggered.
-*/
-VOID Send2040CoexistAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    UCHAR  Wcid,
-	IN	BOOLEAN	bAddIntolerantCha)
-{
-	PUCHAR			pOutBuffer = NULL;
-	NDIS_STATUS 	NStatus;
-	FRAME_ACTION_HDR	Frame;
-	ULONG			FrameLen;
-	ULONG			IntolerantChaRepLen;
-
-	IntolerantChaRepLen = 0;
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-	if(NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("ACT - Send2040CoexistAction() allocate memory failed \n"));
-		return;
-	}
-	ActHeaderInit(pAd, &Frame.Hdr, pAd->MacTab.Content[Wcid].Addr, pAd->CommonCfg.Bssid);
-	Frame.Category = CATEGORY_PUBLIC;
-	Frame.Action = ACTION_BSS_2040_COEXIST;
-
-	MakeOutgoingFrame(pOutBuffer,				&FrameLen,
-				  sizeof(FRAME_ACTION_HDR),	  &Frame,
-				  END_OF_ARGS);
-
-	*(pOutBuffer + FrameLen) = pAd->CommonCfg.BSSCoexist2040.word;
-	FrameLen++;
-
-	if (bAddIntolerantCha == TRUE)
-		IntolerantChaRepLen = BuildIntolerantChannelRep(pAd, pOutBuffer + FrameLen);
-
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen + IntolerantChaRepLen);
-	DBGPRINT(RT_DEBUG_ERROR,("ACT - Send2040CoexistAction( BSSCoexist2040 = 0x%x )  \n", pAd->CommonCfg.BSSCoexist2040.word));
-
-}
-
-
-/*
-	==========================================================================
-	Description:
-	After scan, Update 20/40 BSS Coexistence IE and send out.
-	According to 802.11n D3.03 11.14.10
-
-	Parameters:
-	==========================================================================
- */
-VOID Update2040CoexistFrameAndNotify(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    UCHAR  Wcid,
-	IN	BOOLEAN	bAddIntolerantCha)
-{
-	BSS_2040_COEXIST_IE	OldValue;
-
-	OldValue.word = pAd->CommonCfg.BSSCoexist2040.word;
-	if ((pAd->CommonCfg.TriggerEventTab.EventANo > 0) || (pAd->CommonCfg.TriggerEventTab.EventBCountDown > 0))
-		pAd->CommonCfg.BSSCoexist2040.field.BSS20WidthReq = 1;
-
-	// Need to check !!!!
-	// How STA will set Intolerant40 if implementation dependent. Now we don't set this bit first.!!!!!
-	// So Only check BSS20WidthReq change.
-	if (OldValue.field.BSS20WidthReq != pAd->CommonCfg.BSSCoexist2040.field.BSS20WidthReq)
-	{
-		Send2040CoexistAction(pAd, Wcid, bAddIntolerantCha);
-	}
-}
-#endif // CONFIG_STA_SUPPORT //
-
-
-BOOLEAN ChannelSwitchSanityCheck(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    UCHAR  Wcid,
-	IN    UCHAR  NewChannel,
-	IN    UCHAR  Secondary)
-{
-	UCHAR		i;
-
-	if (Wcid >= MAX_LEN_OF_MAC_TABLE)
-		return FALSE;
-
-	if ((NewChannel > 7) && (Secondary == 1))
-		return FALSE;
-
-	if ((NewChannel < 5) && (Secondary == 3))
-		return FALSE;
-
-	// 0. Check if new channel is in the channellist.
-	for (i = 0;i < pAd->ChannelListNum;i++)
-	{
-		if (pAd->ChannelList[i].Channel == NewChannel)
-		{
-			break;
-		}
-	}
-
-	if (i == pAd->ChannelListNum)
-		return FALSE;
-
-	return TRUE;
-}
-
-
-VOID ChannelSwitchAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    UCHAR  Wcid,
-	IN    UCHAR  NewChannel,
-	IN    UCHAR  Secondary)
-{
-	UCHAR		BBPValue = 0;
-	ULONG		MACValue;
-
-	DBGPRINT(RT_DEBUG_TRACE,("SPECTRUM - ChannelSwitchAction(NewChannel = %d , Secondary = %d)  \n", NewChannel, Secondary));
-
-	if (ChannelSwitchSanityCheck(pAd, Wcid, NewChannel, Secondary) == FALSE)
-		return;
-
-	// 1.  Switches to BW = 20.
-	if (Secondary == 0)
-	{
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
-		BBPValue&= (~0x18);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
-		if (pAd->MACVersion == 0x28600100)
-		{
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x16);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x08);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x11);
-			DBGPRINT(RT_DEBUG_TRACE, ("!!!rt2860C !!! \n" ));
-		}
-		pAd->CommonCfg.BBPCurrentBW = BW_20;
-		pAd->CommonCfg.Channel = NewChannel;
-		pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel;
-		AsicSwitchChannel(pAd, pAd->CommonCfg.Channel,FALSE);
-		AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-		pAd->MacTab.Content[Wcid].HTPhyMode.field.BW = 0;
-		DBGPRINT(RT_DEBUG_TRACE, ("!!!20MHz   !!! \n" ));
-	}
-	// 1.  Switches to BW = 40 And Station supports BW = 40.
-	else if (((Secondary == 1) || (Secondary == 3)) && (pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth == 1))
-	{
-		pAd->CommonCfg.Channel = NewChannel;
-
-		if (Secondary == 1)
-		{
-			// Secondary above.
-			pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel + 2;
-			RTMP_IO_READ32(pAd, TX_BAND_CFG, &MACValue);
-			MACValue &= 0xfe;
-			RTMP_IO_WRITE32(pAd, TX_BAND_CFG, MACValue);
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
-			BBPValue&= (~0x18);
-			BBPValue|= (0x10);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPValue);
-			BBPValue&= (~0x20);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPValue);
-			DBGPRINT(RT_DEBUG_TRACE, ("!!!40MHz Lower LINK UP !!! Control Channel at Below. Central = %d \n", pAd->CommonCfg.CentralChannel ));
-		}
-		else
-		{
-			// Secondary below.
-			pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel - 2;
-			RTMP_IO_READ32(pAd, TX_BAND_CFG, &MACValue);
-			MACValue &= 0xfe;
-			MACValue |= 0x1;
-			RTMP_IO_WRITE32(pAd, TX_BAND_CFG, MACValue);
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
-			BBPValue&= (~0x18);
-			BBPValue|= (0x10);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPValue);
-			BBPValue&= (~0x20);
-			BBPValue|= (0x20);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPValue);
-			DBGPRINT(RT_DEBUG_TRACE, ("!!!40MHz Upper LINK UP !!! Control Channel at UpperCentral = %d \n", pAd->CommonCfg.CentralChannel ));
-		}
-		pAd->CommonCfg.BBPCurrentBW = BW_40;
-		AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
-		AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
-		pAd->MacTab.Content[Wcid].HTPhyMode.field.BW = 1;
-	}
-}
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
-
-VOID PeerPublicAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-#ifdef DOT11N_DRAFT3
-	UCHAR	Action = Elem->Msg[LENGTH_802_11+1];
-#endif // DOT11N_DRAFT3 //
-
-	if (Elem->Wcid >= MAX_LEN_OF_MAC_TABLE)
-		return;
-
-#ifdef DOT11N_DRAFT3
-	switch(Action)
-	{
-		case ACTION_BSS_2040_COEXIST:	// Format defined in IEEE 7.4.7a.1 in 11n Draf3.03
-			{
-				//UCHAR	BssCoexist;
-				BSS_2040_COEXIST_ELEMENT		*pCoexistInfo;
-				BSS_2040_COEXIST_IE 			*pBssCoexistIe;
-				BSS_2040_INTOLERANT_CH_REPORT	*pIntolerantReport = NULL;
-
-				if (Elem->MsgLen <= (LENGTH_802_11 + sizeof(BSS_2040_COEXIST_ELEMENT)) )
-				{
-					DBGPRINT(RT_DEBUG_ERROR, ("ACTION - 20/40 BSS Coexistence Management Frame length too short! len = %ld!\n", Elem->MsgLen));
-					break;
-				}
-				DBGPRINT(RT_DEBUG_TRACE, ("ACTION - 20/40 BSS Coexistence Management action----> \n"));
-				hex_dump("CoexistenceMgmtFrame", Elem->Msg, Elem->MsgLen);
-
-
-				pCoexistInfo = (BSS_2040_COEXIST_ELEMENT *) &Elem->Msg[LENGTH_802_11+2];
-				//hex_dump("CoexistInfo", (PUCHAR)pCoexistInfo, sizeof(BSS_2040_COEXIST_ELEMENT));
-				if (Elem->MsgLen >= (LENGTH_802_11 + sizeof(BSS_2040_COEXIST_ELEMENT) + sizeof(BSS_2040_INTOLERANT_CH_REPORT)))
-				{
-					pIntolerantReport = (BSS_2040_INTOLERANT_CH_REPORT *)((PUCHAR)pCoexistInfo + sizeof(BSS_2040_COEXIST_ELEMENT));
-				}
-				//hex_dump("IntolerantReport ", (PUCHAR)pIntolerantReport, sizeof(BSS_2040_INTOLERANT_CH_REPORT));
-
-				pBssCoexistIe = (BSS_2040_COEXIST_IE *)(&pCoexistInfo->BssCoexistIe);
-
-#ifdef CONFIG_STA_SUPPORT
-				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				{
-					if (INFRA_ON(pAd))
-					{
-						StaPublicAction(pAd, pCoexistInfo);
-					}
-				}
-#endif // CONFIG_STA_SUPPORT //
-
-			}
-			break;
-	}
-
-#endif // DOT11N_DRAFT3 //
-
-}
-
-
-static VOID ReservedAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR Category;
-
-	if (Elem->MsgLen <= LENGTH_802_11)
-	{
-		return;
-	}
-
-	Category = Elem->Msg[LENGTH_802_11];
-	DBGPRINT(RT_DEBUG_TRACE,("Rcv reserved category(%d) Action Frame\n", Category));
-	hex_dump("Reserved Action Frame", &Elem->Msg[0], Elem->MsgLen);
-}
-
-VOID PeerRMAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-
-{
-	return;
-}
-
-#ifdef DOT11_N_SUPPORT
-static VOID respond_ht_information_exchange_action(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	PUCHAR			pOutBuffer = NULL;
-	NDIS_STATUS		NStatus;
-	ULONG			FrameLen;
-	FRAME_HT_INFO	HTINFOframe, *pFrame;
-	UCHAR   		*pAddr;
-
-
-	// 2. Always send back ADDBA Response
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);	 //Get an unused nonpaged memory
-
-	if (NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_TRACE,("ACTION - respond_ht_information_exchange_action() allocate memory failed \n"));
-		return;
-	}
-
-	// get RA
-	pFrame = (FRAME_HT_INFO *) &Elem->Msg[0];
-	pAddr = pFrame->Hdr.Addr2;
-
-	NdisZeroMemory(&HTINFOframe, sizeof(FRAME_HT_INFO));
-	// 2-1. Prepare ADDBA Response frame.
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if (ADHOC_ON(pAd))
-			ActHeaderInit(pAd, &HTINFOframe.Hdr, pAddr, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
-		else
-			ActHeaderInit(pAd, &HTINFOframe.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAddr);
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	HTINFOframe.Category = CATEGORY_HT;
-	HTINFOframe.Action = HT_INFO_EXCHANGE;
-	HTINFOframe.HT_Info.Request = 0;
-	HTINFOframe.HT_Info.Forty_MHz_Intolerant = pAd->CommonCfg.HtCapability.HtCapInfo.Forty_Mhz_Intolerant;
-	HTINFOframe.HT_Info.STA_Channel_Width	 = pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth;
-
-	MakeOutgoingFrame(pOutBuffer,					&FrameLen,
-					  sizeof(FRAME_HT_INFO),	&HTINFOframe,
-					  END_OF_ARGS);
-
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-}
-
-
-#ifdef DOT11N_DRAFT3
-VOID SendNotifyBWActionFrame(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR  Wcid,
-	IN UCHAR apidx)
-{
-	PUCHAR			pOutBuffer = NULL;
-	NDIS_STATUS 	NStatus;
-	FRAME_ACTION_HDR	Frame;
-	ULONG			FrameLen;
-	PUCHAR			pAddr1;
-
-
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-	if(NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("ACT - SendNotifyBWAction() allocate memory failed \n"));
-		return;
-	}
-
-	if (Wcid == MCAST_WCID)
-		pAddr1 = &BROADCAST_ADDR[0];
-	else
-		pAddr1 = pAd->MacTab.Content[Wcid].Addr;
-	ActHeaderInit(pAd, &Frame.Hdr, pAddr1, pAd->ApCfg.MBSSID[apidx].Bssid, pAd->ApCfg.MBSSID[apidx].Bssid);
-
-	Frame.Category = CATEGORY_HT;
-	Frame.Action = NOTIFY_BW_ACTION;
-
-	MakeOutgoingFrame(pOutBuffer,				&FrameLen,
-				  sizeof(FRAME_ACTION_HDR),	  &Frame,
-				  END_OF_ARGS);
-
-	*(pOutBuffer + FrameLen) = pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth;
-	FrameLen++;
-
-
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-	DBGPRINT(RT_DEBUG_TRACE,("ACT - SendNotifyBWAction(NotifyBW= %d)!\n", pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth));
-
-}
-#endif // DOT11N_DRAFT3 //
-
-
-VOID PeerHTAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR	Action = Elem->Msg[LENGTH_802_11+1];
-
-	if (Elem->Wcid >= MAX_LEN_OF_MAC_TABLE)
-		return;
-
-	switch(Action)
-	{
-		case NOTIFY_BW_ACTION:
-			DBGPRINT(RT_DEBUG_TRACE,("ACTION - HT Notify Channel bandwidth action----> \n"));
-#ifdef CONFIG_STA_SUPPORT
-			if(pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE)
-			{
-				// Note, this is to patch DIR-1353 AP. When the AP set to Wep, it will use legacy mode. But AP still keeps
-				// sending BW_Notify Action frame, and cause us to linkup and linkdown.
-				// In legacy mode, don't need to parse HT action frame.
-				DBGPRINT(RT_DEBUG_TRACE,("ACTION -Ignore HT Notify Channel BW when link as legacy mode. BW = %d---> \n",
-								Elem->Msg[LENGTH_802_11+2] ));
-				break;
-			}
-#endif // CONFIG_STA_SUPPORT //
-
-			if (Elem->Msg[LENGTH_802_11+2] == 0)	// 7.4.8.2. if value is 1, keep the same as supported channel bandwidth.
-				pAd->MacTab.Content[Elem->Wcid].HTPhyMode.field.BW = 0;
-
-			break;
-
-		case SMPS_ACTION:
-			// 7.3.1.25
- 			DBGPRINT(RT_DEBUG_TRACE,("ACTION - SMPS action----> \n"));
-			if (((Elem->Msg[LENGTH_802_11+2]&0x1) == 0))
-			{
-				pAd->MacTab.Content[Elem->Wcid].MmpsMode = MMPS_ENABLE;
-			}
-			else if (((Elem->Msg[LENGTH_802_11+2]&0x2) == 0))
-			{
-				pAd->MacTab.Content[Elem->Wcid].MmpsMode = MMPS_STATIC;
-			}
-			else
-			{
-				pAd->MacTab.Content[Elem->Wcid].MmpsMode = MMPS_DYNAMIC;
-			}
-
-			DBGPRINT(RT_DEBUG_TRACE,("Aid(%d) MIMO PS = %d\n", Elem->Wcid, pAd->MacTab.Content[Elem->Wcid].MmpsMode));
-			// rt2860c : add something for smps change.
-			break;
-
-		case SETPCO_ACTION:
-			break;
-
-		case MIMO_CHA_MEASURE_ACTION:
-			break;
-
-		case HT_INFO_EXCHANGE:
-			{
-				HT_INFORMATION_OCTET	*pHT_info;
-
-				pHT_info = (HT_INFORMATION_OCTET *) &Elem->Msg[LENGTH_802_11+2];
-    				// 7.4.8.10
-    				DBGPRINT(RT_DEBUG_TRACE,("ACTION - HT Information Exchange action----> \n"));
-    				if (pHT_info->Request)
-    				{
-    					respond_ht_information_exchange_action(pAd, Elem);
-    				}
-			}
-    			break;
-	}
-}
-
-
-/*
-	==========================================================================
-	Description:
-		Retry sending ADDBA Reqest.
-
-	IRQL = DISPATCH_LEVEL
-
-	Parametrs:
-	p8023Header: if this is already 802.3 format, p8023Header is NULL
-
-	Return	: TRUE if put into rx reordering buffer, shouldn't indicaterxhere.
-				FALSE , then continue indicaterx at this moment.
-	==========================================================================
- */
-VOID ORIBATimerTimeout(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	MAC_TABLE_ENTRY	*pEntry;
-	INT			i, total;
-//	FRAME_BAR			FrameBar;
-//	ULONG			FrameLen;
-//	NDIS_STATUS 	NStatus;
-//	PUCHAR			pOutBuffer = NULL;
-//	USHORT			Sequence;
-	UCHAR			TID;
-
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-	total = pAd->MacTab.Size * NUM_OF_TID;
-
-	for (i = 1; ((i <MAX_LEN_OF_BA_ORI_TABLE) && (total > 0)) ; i++)
-	{
-		if  (pAd->BATable.BAOriEntry[i].ORI_BA_Status == Originator_Done)
-		{
-			pEntry = &pAd->MacTab.Content[pAd->BATable.BAOriEntry[i].Wcid];
-			TID = pAd->BATable.BAOriEntry[i].TID;
-
-			ASSERT(pAd->BATable.BAOriEntry[i].Wcid < MAX_LEN_OF_MAC_TABLE);
-		}
-		total --;
-	}
-}
-
-
-VOID SendRefreshBAR(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MAC_TABLE_ENTRY	*pEntry)
-{
-	FRAME_BAR		FrameBar;
-	ULONG			FrameLen;
-	NDIS_STATUS 	NStatus;
-	PUCHAR			pOutBuffer = NULL;
-	USHORT			Sequence;
-	UCHAR			i, TID;
-	USHORT			idx;
-	BA_ORI_ENTRY	*pBAEntry;
-
-	for (i = 0; i <NUM_OF_TID; i++)
-	{
-		idx = pEntry->BAOriWcidArray[i];
-		if (idx == 0)
-		{
-			continue;
-		}
-		pBAEntry = &pAd->BATable.BAOriEntry[idx];
-
-		if  (pBAEntry->ORI_BA_Status == Originator_Done)
-		{
-			TID = pBAEntry->TID;
-
-			ASSERT(pBAEntry->Wcid < MAX_LEN_OF_MAC_TABLE);
-
-			NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-			if(NStatus != NDIS_STATUS_SUCCESS)
-			{
-				DBGPRINT(RT_DEBUG_ERROR,("BA - MlmeADDBAAction() allocate memory failed \n"));
-				return;
-			}
-
-			Sequence = pEntry->TxSeq[TID];
-
-
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				BarHeaderInit(pAd, &FrameBar, pEntry->Addr, pAd->CurrentAddress);
-#endif // CONFIG_STA_SUPPORT //
-
-			FrameBar.StartingSeq.field.FragNum = 0; // make sure sequence not clear in DEL function.
-			FrameBar.StartingSeq.field.StartSeq = Sequence; // make sure sequence not clear in DEL funciton.
-			FrameBar.BarControl.TID = TID; // make sure sequence not clear in DEL funciton.
-
-			MakeOutgoingFrame(pOutBuffer,				&FrameLen,
-							  sizeof(FRAME_BAR),	  &FrameBar,
-							  END_OF_ARGS);
-			//if (!(CLIENT_STATUS_TEST_FLAG(pEntry, fCLIENT_STATUS_RALINK_CHIPSET)))
-			if (1)	// Now we always send BAR.
-			{
-				//MiniportMMRequestUnlock(pAd, 0, pOutBuffer, FrameLen);
-				MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-			}
-			MlmeFreeMemory(pAd, pOutBuffer);
-		}
-	}
-}
-#endif // DOT11_N_SUPPORT //
-
-VOID ActHeaderInit(
-    IN	PRTMP_ADAPTER	pAd,
-    IN OUT PHEADER_802_11 pHdr80211,
-    IN PUCHAR Addr1,
-    IN PUCHAR Addr2,
-    IN PUCHAR Addr3)
-{
-    NdisZeroMemory(pHdr80211, sizeof(HEADER_802_11));
-    pHdr80211->FC.Type = BTYPE_MGMT;
-    pHdr80211->FC.SubType = SUBTYPE_ACTION;
-
-    COPY_MAC_ADDR(pHdr80211->Addr1, Addr1);
-	COPY_MAC_ADDR(pHdr80211->Addr2, Addr2);
-    COPY_MAC_ADDR(pHdr80211->Addr3, Addr3);
-}
-
-VOID BarHeaderInit(
-	IN	PRTMP_ADAPTER	pAd,
-	IN OUT PFRAME_BAR pCntlBar,
-	IN PUCHAR pDA,
-	IN PUCHAR pSA)
-{
-//	USHORT	Duration;
-
-	NdisZeroMemory(pCntlBar, sizeof(FRAME_BAR));
-	pCntlBar->FC.Type = BTYPE_CNTL;
-	pCntlBar->FC.SubType = SUBTYPE_BLOCK_ACK_REQ;
-   	pCntlBar->BarControl.MTID = 0;
-	pCntlBar->BarControl.Compressed = 1;
-	pCntlBar->BarControl.ACKPolicy = 0;
-
-
-	pCntlBar->Duration = 16 + RTMPCalcDuration(pAd, RATE_1, sizeof(FRAME_BA));
-
-	COPY_MAC_ADDR(pCntlBar->Addr1, pDA);
-	COPY_MAC_ADDR(pCntlBar->Addr2, pSA);
-}
-
-
-/*
-	==========================================================================
-	Description:
-		Insert Category and action code into the action frame.
-
-	Parametrs:
-		1. frame buffer pointer.
-		2. frame length.
-		3. category code of the frame.
-		4. action code of the frame.
-
-	Return	: None.
-	==========================================================================
- */
-VOID InsertActField(
-	IN PRTMP_ADAPTER pAd,
-	OUT PUCHAR pFrameBuf,
-	OUT PULONG pFrameLen,
-	IN UINT8 Category,
-	IN UINT8 ActCode)
-{
-	ULONG TempLen;
-
-	MakeOutgoingFrame(	pFrameBuf,		&TempLen,
-						1,				&Category,
-						1,				&ActCode,
-						END_OF_ARGS);
-
-	*pFrameLen = *pFrameLen + TempLen;
-
-	return;
-}
+#include "../../rt2860/common/action.c"
diff --git a/drivers/staging/rt2870/common/action.h b/drivers/staging/rt2870/common/action.h
index ce3877dce81..9a1895525f3 100644
--- a/drivers/staging/rt2870/common/action.h
+++ b/drivers/staging/rt2870/common/action.h
@@ -1,68 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	aironet.h
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Name		Date			Modification logs
-	Paul Lin	04-06-15		Initial
-*/
-
-#ifndef	__ACTION_H__
-#define	__ACTION_H__
-
-typedef struct PACKED __HT_INFO_OCTET
-{
-#ifdef RT_BIG_ENDIAN
-	UCHAR	Reserved:5;
-	UCHAR 	STA_Channel_Width:1;
-	UCHAR	Forty_MHz_Intolerant:1;
-	UCHAR	Request:1;
-#else
-	UCHAR	Request:1;
-	UCHAR	Forty_MHz_Intolerant:1;
-	UCHAR 	STA_Channel_Width:1;
-	UCHAR	Reserved:5;
-#endif
-} HT_INFORMATION_OCTET;
-
-
-typedef struct PACKED __FRAME_HT_INFO
-{
-	HEADER_802_11   		Hdr;
-	UCHAR					Category;
-	UCHAR					Action;
-	HT_INFORMATION_OCTET	HT_Info;
-}   FRAME_HT_INFO, *PFRAME_HT_INFO;
-
-#endif /* __ACTION_H__ */
-
-
+#include "../../rt2860/common/action.h"
diff --git a/drivers/staging/rt2870/common/ba_action.c b/drivers/staging/rt2870/common/ba_action.c
index d9f738177e2..a9e6a09d994 100644
--- a/drivers/staging/rt2870/common/ba_action.c
+++ b/drivers/staging/rt2870/common/ba_action.c
@@ -1,1798 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-
-#ifdef DOT11_N_SUPPORT
-
-#include "../rt_config.h"
-
-
-
-#define BA_ORI_INIT_SEQ		(pEntry->TxSeq[TID]) //1			// inital sequence number of BA session
-
-#define ORI_SESSION_MAX_RETRY	8
-#define ORI_BA_SESSION_TIMEOUT	(2000)	// ms
-#define REC_BA_SESSION_IDLE_TIMEOUT	(1000)	// ms
-
-#define REORDERING_PACKET_TIMEOUT		((100 * HZ)/1000)	// system ticks -- 100 ms
-#define MAX_REORDERING_PACKET_TIMEOUT	((3000 * HZ)/1000)	// system ticks -- 100 ms
-
-#define RESET_RCV_SEQ		(0xFFFF)
-
-static void ba_mpdu_blk_free(PRTMP_ADAPTER pAd, struct reordering_mpdu *mpdu_blk);
-
-
-BA_ORI_ENTRY *BATableAllocOriEntry(
-								  IN  PRTMP_ADAPTER   pAd,
-								  OUT USHORT          *Idx);
-
-BA_REC_ENTRY *BATableAllocRecEntry(
-								  IN  PRTMP_ADAPTER   pAd,
-								  OUT USHORT          *Idx);
-
-VOID BAOriSessionSetupTimeout(
-    IN PVOID SystemSpecific1,
-    IN PVOID FunctionContext,
-    IN PVOID SystemSpecific2,
-    IN PVOID SystemSpecific3);
-
-VOID BARecSessionIdleTimeout(
-    IN PVOID SystemSpecific1,
-    IN PVOID FunctionContext,
-    IN PVOID SystemSpecific2,
-    IN PVOID SystemSpecific3);
-
-
-BUILD_TIMER_FUNCTION(BAOriSessionSetupTimeout);
-BUILD_TIMER_FUNCTION(BARecSessionIdleTimeout);
-
-#define ANNOUNCE_REORDERING_PACKET(_pAd, _mpdu_blk)	\
-			Announce_Reordering_Packet(_pAd, _mpdu_blk);
-
-VOID BA_MaxWinSizeReasign(
-	IN PRTMP_ADAPTER	pAd,
-	IN MAC_TABLE_ENTRY  *pEntryPeer,
-	OUT UCHAR			*pWinSize)
-{
-	UCHAR MaxSize;
-
-
-	if (pAd->MACVersion >= RALINK_2883_VERSION) // 3*3
-	{
-		if (pAd->MACVersion >= RALINK_3070_VERSION)
-		{
-			if (pEntryPeer->WepStatus != Ndis802_11EncryptionDisabled)
-				MaxSize = 7; // for non-open mode
-			else
-				MaxSize = 13;
-		}
-		else
-			MaxSize = 31;
-	}
-	else if (pAd->MACVersion >= RALINK_2880E_VERSION) // 2880 e
-	{
-		if (pEntryPeer->WepStatus != Ndis802_11EncryptionDisabled)
-			MaxSize = 7; // for non-open mode
-		else
-			MaxSize = 13;
-	}
-	else
-		MaxSize = 7;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("ba> Win Size = %d, Max Size = %d\n",
-			*pWinSize, MaxSize));
-
-	if ((*pWinSize) > MaxSize)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("ba> reassign max win size from %d to %d\n",
-				*pWinSize, MaxSize));
-
-		*pWinSize = MaxSize;
-	}
-}
-
-void Announce_Reordering_Packet(IN PRTMP_ADAPTER			pAd,
-								IN struct reordering_mpdu	*mpdu)
-{
-	PNDIS_PACKET    pPacket;
-
-	pPacket = mpdu->pPacket;
-
-	if (mpdu->bAMSDU)
-	{
-		ASSERT(0);
-		BA_Reorder_AMSDU_Annnounce(pAd, pPacket);
-	}
-	else
-	{
-		//
-		// pass this 802.3 packet to upper layer or forward this packet to WM directly
-		//
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pPacket, RTMP_GET_PACKET_IF(pPacket));
-#endif // CONFIG_STA_SUPPORT //
-	}
-}
-
-/*
- * Insert a reordering mpdu into sorted linked list by sequence no.
- */
-BOOLEAN ba_reordering_mpdu_insertsorted(struct reordering_list *list, struct reordering_mpdu *mpdu)
-{
-
-	struct reordering_mpdu **ppScan = &list->next;
-
-	while (*ppScan != NULL)
-	{
-		if (SEQ_SMALLER((*ppScan)->Sequence, mpdu->Sequence, MAXSEQ))
-		{
-			ppScan = &(*ppScan)->next;
-		}
-		else if ((*ppScan)->Sequence == mpdu->Sequence)
-		{
-			/* give up this duplicated frame */
-			return(FALSE);
-		}
-		else
-		{
-			/* find position */
-			break;
-		}
-	}
-
-	mpdu->next = *ppScan;
-	*ppScan = mpdu;
-	list->qlen++;
-	return TRUE;
-}
-
-
-/*
- * caller lock critical section if necessary
- */
-static inline void ba_enqueue(struct reordering_list *list, struct reordering_mpdu *mpdu_blk)
-{
-	list->qlen++;
-	mpdu_blk->next = list->next;
-	list->next = mpdu_blk;
-}
-
-/*
- * caller lock critical section if necessary
- */
-static inline struct reordering_mpdu * ba_dequeue(struct reordering_list *list)
-{
-	struct reordering_mpdu *mpdu_blk = NULL;
-
-	ASSERT(list);
-
-		if (list->qlen)
-		{
-			list->qlen--;
-			mpdu_blk = list->next;
-			if (mpdu_blk)
-			{
-				list->next = mpdu_blk->next;
-				mpdu_blk->next = NULL;
-			}
-		}
-	return mpdu_blk;
-}
-
-
-static inline struct reordering_mpdu  *ba_reordering_mpdu_dequeue(struct reordering_list *list)
-{
-	return(ba_dequeue(list));
-}
-
-
-static inline struct reordering_mpdu  *ba_reordering_mpdu_probe(struct reordering_list *list)
-	{
-	ASSERT(list);
-
-		return(list->next);
-	}
-
-
-/*
- * free all resource for reordering mechanism
- */
-void ba_reordering_resource_release(PRTMP_ADAPTER pAd)
-{
-	BA_TABLE        *Tab;
-	PBA_REC_ENTRY   pBAEntry;
-	struct reordering_mpdu *mpdu_blk;
-	int i;
-
-	Tab = &pAd->BATable;
-
-	/* I.  release all pending reordering packet */
-	NdisAcquireSpinLock(&pAd->BATabLock);
-	for (i = 0; i < MAX_LEN_OF_BA_REC_TABLE; i++)
-	{
-		pBAEntry = &Tab->BARecEntry[i];
-		if (pBAEntry->REC_BA_Status != Recipient_NONE)
-		{
-			while ((mpdu_blk = ba_reordering_mpdu_dequeue(&pBAEntry->list)))
-			{
-				ASSERT(mpdu_blk->pPacket);
-				RELEASE_NDIS_PACKET(pAd, mpdu_blk->pPacket, NDIS_STATUS_FAILURE);
-				ba_mpdu_blk_free(pAd, mpdu_blk);
-			}
-		}
-	}
-	NdisReleaseSpinLock(&pAd->BATabLock);
-
-	ASSERT(pBAEntry->list.qlen == 0);
-	/* II. free memory of reordering mpdu table */
-	NdisAcquireSpinLock(&pAd->mpdu_blk_pool.lock);
-	os_free_mem(pAd, pAd->mpdu_blk_pool.mem);
-	NdisReleaseSpinLock(&pAd->mpdu_blk_pool.lock);
-}
-
-
-
-/*
- * Allocate all resource for reordering mechanism
- */
-BOOLEAN ba_reordering_resource_init(PRTMP_ADAPTER pAd, int num)
-{
-	int     i;
-	PUCHAR  mem;
-	struct reordering_mpdu *mpdu_blk;
-	struct reordering_list *freelist;
-
-	/* allocate spinlock */
-	NdisAllocateSpinLock(&pAd->mpdu_blk_pool.lock);
-
-	/* initialize freelist */
-	freelist = &pAd->mpdu_blk_pool.freelist;
-	freelist->next = NULL;
-	freelist->qlen = 0;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Allocate %d memory for BA reordering\n", (UINT32)(num*sizeof(struct reordering_mpdu))));
-
-	/* allocate number of mpdu_blk memory */
-	os_alloc_mem(pAd, (PUCHAR *)&mem, (num*sizeof(struct reordering_mpdu)));
-
-	pAd->mpdu_blk_pool.mem = mem;
-
-	if (mem == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("Can't Allocate Memory for BA Reordering\n"));
-		return(FALSE);
-	}
-
-	/* build mpdu_blk free list */
-	for (i=0; i<num; i++)
-	{
-		/* get mpdu_blk */
-		mpdu_blk = (struct reordering_mpdu *) mem;
-		/* initial mpdu_blk */
-		NdisZeroMemory(mpdu_blk, sizeof(struct reordering_mpdu));
-		/* next mpdu_blk */
-		mem += sizeof(struct reordering_mpdu);
-		/* insert mpdu_blk into freelist */
-		ba_enqueue(freelist, mpdu_blk);
-	}
-
-	return(TRUE);
-}
-
-//static int blk_count=0; // sample take off, no use
-
-static struct reordering_mpdu *ba_mpdu_blk_alloc(PRTMP_ADAPTER pAd)
-{
-	struct reordering_mpdu *mpdu_blk;
-
-	NdisAcquireSpinLock(&pAd->mpdu_blk_pool.lock);
-	mpdu_blk = ba_dequeue(&pAd->mpdu_blk_pool.freelist);
-	if (mpdu_blk)
-	{
-//		blk_count++;
-		/* reset mpdu_blk */
-		NdisZeroMemory(mpdu_blk, sizeof(struct reordering_mpdu));
-	}
-	NdisReleaseSpinLock(&pAd->mpdu_blk_pool.lock);
-	return mpdu_blk;
-}
-
-static void ba_mpdu_blk_free(PRTMP_ADAPTER pAd, struct reordering_mpdu *mpdu_blk)
-{
-	ASSERT(mpdu_blk);
-
-	NdisAcquireSpinLock(&pAd->mpdu_blk_pool.lock);
-//	blk_count--;
-	ba_enqueue(&pAd->mpdu_blk_pool.freelist, mpdu_blk);
-	NdisReleaseSpinLock(&pAd->mpdu_blk_pool.lock);
-}
-
-
-static USHORT ba_indicate_reordering_mpdus_in_order(
-												   IN PRTMP_ADAPTER    pAd,
-												   IN PBA_REC_ENTRY    pBAEntry,
-												   IN USHORT           StartSeq)
-{
-	struct reordering_mpdu *mpdu_blk;
-	USHORT  LastIndSeq = RESET_RCV_SEQ;
-
-	NdisAcquireSpinLock(&pBAEntry->RxReRingLock);
-
-	while ((mpdu_blk = ba_reordering_mpdu_probe(&pBAEntry->list)))
-		{
-			/* find in-order frame */
-		if (!SEQ_STEPONE(mpdu_blk->Sequence, StartSeq, MAXSEQ))
-			{
-				break;
-			}
-			/* dequeue in-order frame from reodering list */
-			mpdu_blk = ba_reordering_mpdu_dequeue(&pBAEntry->list);
-			/* pass this frame up */
-		ANNOUNCE_REORDERING_PACKET(pAd, mpdu_blk);
-		/* move to next sequence */
-			StartSeq = mpdu_blk->Sequence;
-		LastIndSeq = StartSeq;
-		/* free mpdu_blk */
-			ba_mpdu_blk_free(pAd, mpdu_blk);
-	}
-
-	NdisReleaseSpinLock(&pBAEntry->RxReRingLock);
-
-	/* update last indicated sequence */
-	return LastIndSeq;
-}
-
-static void ba_indicate_reordering_mpdus_le_seq(
-											   IN PRTMP_ADAPTER    pAd,
-											   IN PBA_REC_ENTRY    pBAEntry,
-											   IN USHORT           Sequence)
-{
-	struct reordering_mpdu *mpdu_blk;
-
-	NdisAcquireSpinLock(&pBAEntry->RxReRingLock);
-	while ((mpdu_blk = ba_reordering_mpdu_probe(&pBAEntry->list)))
-		{
-			/* find in-order frame */
-		if ((mpdu_blk->Sequence == Sequence) || SEQ_SMALLER(mpdu_blk->Sequence, Sequence, MAXSEQ))
-		{
-			/* dequeue in-order frame from reodering list */
-			mpdu_blk = ba_reordering_mpdu_dequeue(&pBAEntry->list);
-			/* pass this frame up */
-			ANNOUNCE_REORDERING_PACKET(pAd, mpdu_blk);
-			/* free mpdu_blk */
-			ba_mpdu_blk_free(pAd, mpdu_blk);
-		}
-		else
-			{
-				break;
-			}
-	}
-	NdisReleaseSpinLock(&pBAEntry->RxReRingLock);
-}
-
-
-static void ba_refresh_reordering_mpdus(
-									   IN PRTMP_ADAPTER    pAd,
-									   PBA_REC_ENTRY       pBAEntry)
-{
-	struct reordering_mpdu *mpdu_blk;
-
-	NdisAcquireSpinLock(&pBAEntry->RxReRingLock);
-
-			/* dequeue in-order frame from reodering list */
-	while ((mpdu_blk = ba_reordering_mpdu_dequeue(&pBAEntry->list)))
-	{
-			/* pass this frame up */
-		ANNOUNCE_REORDERING_PACKET(pAd, mpdu_blk);
-
-		pBAEntry->LastIndSeq = mpdu_blk->Sequence;
-			ba_mpdu_blk_free(pAd, mpdu_blk);
-
-		/* update last indicated sequence */
-	}
-	ASSERT(pBAEntry->list.qlen == 0);
-	pBAEntry->LastIndSeq = RESET_RCV_SEQ;
-	NdisReleaseSpinLock(&pBAEntry->RxReRingLock);
-}
-
-
-//static
-void ba_flush_reordering_timeout_mpdus(
-									IN PRTMP_ADAPTER    pAd,
-									IN PBA_REC_ENTRY    pBAEntry,
-									IN ULONG            Now32)
-
-{
-	USHORT Sequence;
-
-//	if ((RTMP_TIME_AFTER((unsigned long)Now32, (unsigned long)(pBAEntry->LastIndSeqAtTimer+REORDERING_PACKET_TIMEOUT)) &&
-//		 (pBAEntry->list.qlen > ((pBAEntry->BAWinSize*7)/8))) //||
-//		(RTMP_TIME_AFTER((unsigned long)Now32, (unsigned long)(pBAEntry->LastIndSeqAtTimer+(10*REORDERING_PACKET_TIMEOUT))) &&
-//		 (pBAEntry->list.qlen > (pBAEntry->BAWinSize/8)))
-	if (RTMP_TIME_AFTER((unsigned long)Now32, (unsigned long)(pBAEntry->LastIndSeqAtTimer+(MAX_REORDERING_PACKET_TIMEOUT/6)))
-		 &&(pBAEntry->list.qlen > 1)
-		)
-	{
-		DBGPRINT(RT_DEBUG_TRACE,("timeout[%d] (%08lx-%08lx = %d > %d): %x, flush all!\n ", pBAEntry->list.qlen, Now32, (pBAEntry->LastIndSeqAtTimer),
-			   (int)((long) Now32 - (long)(pBAEntry->LastIndSeqAtTimer)), MAX_REORDERING_PACKET_TIMEOUT,
-			   pBAEntry->LastIndSeq));
-		ba_refresh_reordering_mpdus(pAd, pBAEntry);
-		pBAEntry->LastIndSeqAtTimer = Now32;
-	}
-	else
-	if (RTMP_TIME_AFTER((unsigned long)Now32, (unsigned long)(pBAEntry->LastIndSeqAtTimer+(REORDERING_PACKET_TIMEOUT)))
-		&& (pBAEntry->list.qlen > 0)
-	   )
-		{
-    		//
-		// force LastIndSeq to shift to LastIndSeq+1
-    		//
-    		Sequence = (pBAEntry->LastIndSeq+1) & MAXSEQ;
-    		ba_indicate_reordering_mpdus_le_seq(pAd, pBAEntry, Sequence);
-    		pBAEntry->LastIndSeqAtTimer = Now32;
-			pBAEntry->LastIndSeq = Sequence;
-    		//
-    		// indicate in-order mpdus
-    		//
-    		Sequence = ba_indicate_reordering_mpdus_in_order(pAd, pBAEntry, Sequence);
-    		if (Sequence != RESET_RCV_SEQ)
-    		{
-    			pBAEntry->LastIndSeq = Sequence;
-    		}
-
-	}
-#if 0
-	else if (
-			 (RTMP_TIME_AFTER((unsigned long)Now32, (unsigned long)(pBAEntry->LastIndSeqAtTimer+(MAX_REORDERING_PACKET_TIMEOUT))) &&
-			  (pBAEntry->list.qlen > 1))
-			)
-		{
-		DBGPRINT(RT_DEBUG_TRACE,("timeout[%d] (%lx-%lx = %d > %d): %x\n ", pBAEntry->list.qlen, Now32, (pBAEntry->LastIndSeqAtTimer),
-			   (int)((long) Now32 - (long)(pBAEntry->LastIndSeqAtTimer)), MAX_REORDERING_PACKET_TIMEOUT,
-			   pBAEntry->LastIndSeq));
-		ba_refresh_reordering_mpdus(pAd, pBAEntry);
-			pBAEntry->LastIndSeqAtTimer = Now32;
-				}
-#endif
-}
-
-
-/*
- * generate ADDBA request to
- * set up BA agreement
- */
-VOID BAOriSessionSetUp(
-					  IN PRTMP_ADAPTER    pAd,
-					  IN MAC_TABLE_ENTRY  *pEntry,
-					  IN UCHAR            TID,
-					  IN USHORT           TimeOut,
-					  IN ULONG            DelayTime,
-					  IN BOOLEAN          isForced)
-
-{
-	//MLME_ADDBA_REQ_STRUCT	AddbaReq;
-	BA_ORI_ENTRY            *pBAEntry = NULL;
-	USHORT                  Idx;
-	BOOLEAN                 Cancelled;
-
-	if ((pAd->CommonCfg.BACapability.field.AutoBA != TRUE)  &&  (isForced == FALSE))
-		return;
-
-	// if this entry is limited to use legacy tx mode, it doesn't generate BA.
-	if (RTMPStaFixedTxMode(pAd, pEntry) != FIXED_TXMODE_HT)
-		return;
-
-	if ((pEntry->BADeclineBitmap & (1<<TID)) && (isForced == FALSE))
-	{
-		// try again after 3 secs
-		DelayTime = 3000;
-//		printk("DeCline BA from Peer\n");
-//		return;
-	}
-
-
-	Idx = pEntry->BAOriWcidArray[TID];
-	if (Idx == 0)
-	{
-		// allocate a BA session
-		pBAEntry = BATableAllocOriEntry(pAd, &Idx);
-		if (pBAEntry == NULL)
-		{
-			DBGPRINT(RT_DEBUG_TRACE,("ADDBA - MlmeADDBAAction() allocate BA session failed \n"));
-			return;
-		}
-	}
-	else
-	{
-		pBAEntry =&pAd->BATable.BAOriEntry[Idx];
-	}
-
-	if (pBAEntry->ORI_BA_Status >= Originator_WaitRes)
-	{
-		return;
-	}
-
-	pEntry->BAOriWcidArray[TID] = Idx;
-
-	// Initialize BA session
-	pBAEntry->ORI_BA_Status = Originator_WaitRes;
-	pBAEntry->Wcid = pEntry->Aid;
-	pBAEntry->BAWinSize = pAd->CommonCfg.BACapability.field.RxBAWinLimit;
-	pBAEntry->Sequence = BA_ORI_INIT_SEQ;
-	pBAEntry->Token = 1;	// (2008-01-21) Jan Lee recommends it - this token can't be 0
-	pBAEntry->TID = TID;
-	pBAEntry->TimeOutValue = TimeOut;
-	pBAEntry->pAdapter = pAd;
-
-	if (!(pEntry->TXBAbitmap & (1<<TID)))
-	{
-		RTMPInitTimer(pAd, &pBAEntry->ORIBATimer, GET_TIMER_FUNCTION(BAOriSessionSetupTimeout), pBAEntry, FALSE);
-	}
-	else
-		RTMPCancelTimer(&pBAEntry->ORIBATimer, &Cancelled);
-
-	// set timer to send ADDBA request
-	RTMPSetTimer(&pBAEntry->ORIBATimer, DelayTime);
-}
-
-VOID BAOriSessionAdd(
-			IN PRTMP_ADAPTER    pAd,
-					IN MAC_TABLE_ENTRY  *pEntry,
-			IN PFRAME_ADDBA_RSP pFrame)
-{
-	BA_ORI_ENTRY  *pBAEntry = NULL;
-	BOOLEAN       Cancelled;
-	UCHAR         TID;
-	USHORT        Idx;
-	PUCHAR          pOutBuffer2 = NULL;
-	NDIS_STATUS     NStatus;
-	ULONG           FrameLen;
-	FRAME_BAR       FrameBar;
-
-	TID = pFrame->BaParm.TID;
-	Idx = pEntry->BAOriWcidArray[TID];
-	pBAEntry =&pAd->BATable.BAOriEntry[Idx];
-
-	// Start fill in parameters.
-	if ((Idx !=0) && (pBAEntry->TID == TID) && (pBAEntry->ORI_BA_Status == Originator_WaitRes))
-	{
-		pBAEntry->BAWinSize = min(pBAEntry->BAWinSize, ((UCHAR)pFrame->BaParm.BufSize));
-		BA_MaxWinSizeReasign(pAd, pEntry, &pBAEntry->BAWinSize);
-
-		pBAEntry->TimeOutValue = pFrame->TimeOutValue;
-		pBAEntry->ORI_BA_Status = Originator_Done;
-		// reset sequence number
-		pBAEntry->Sequence = BA_ORI_INIT_SEQ;
-		// Set Bitmap flag.
-		pEntry->TXBAbitmap |= (1<<TID);
-				RTMPCancelTimer(&pBAEntry->ORIBATimer, &Cancelled);
-
-		pBAEntry->ORIBATimer.TimerValue = 0;	//pFrame->TimeOutValue;
-
-		DBGPRINT(RT_DEBUG_TRACE,("%s : TXBAbitmap = %x, BAWinSize = %d, TimeOut = %ld\n", __func__, pEntry->TXBAbitmap,
-								 pBAEntry->BAWinSize, pBAEntry->ORIBATimer.TimerValue));
-
-		// SEND BAR ;
-		NStatus = MlmeAllocateMemory(pAd, &pOutBuffer2);  //Get an unused nonpaged memory
-		if (NStatus != NDIS_STATUS_SUCCESS)
-		{
-			DBGPRINT(RT_DEBUG_TRACE,("BA - BAOriSessionAdd() allocate memory failed \n"));
-			return;
-		}
-
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			BarHeaderInit(pAd, &FrameBar, pAd->MacTab.Content[pBAEntry->Wcid].Addr, pAd->CurrentAddress);
-#endif // CONFIG_STA_SUPPORT //
-
-		FrameBar.StartingSeq.field.FragNum = 0;	// make sure sequence not clear in DEL function.
-		FrameBar.StartingSeq.field.StartSeq = pBAEntry->Sequence; // make sure sequence not clear in DEL funciton.
-		FrameBar.BarControl.TID = pBAEntry->TID; // make sure sequence not clear in DEL funciton.
-		MakeOutgoingFrame(pOutBuffer2,              &FrameLen,
-						  sizeof(FRAME_BAR),      &FrameBar,
-					  END_OF_ARGS);
-		MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer2, FrameLen);
-		MlmeFreeMemory(pAd, pOutBuffer2);
-
-
-		if (pBAEntry->ORIBATimer.TimerValue)
-			RTMPSetTimer(&pBAEntry->ORIBATimer, pBAEntry->ORIBATimer.TimerValue); // in mSec
-	}
-}
-
-BOOLEAN BARecSessionAdd(
-					   IN PRTMP_ADAPTER    pAd,
-					   IN MAC_TABLE_ENTRY  *pEntry,
-					   IN PFRAME_ADDBA_REQ pFrame)
-{
-	BA_REC_ENTRY            *pBAEntry = NULL;
-	BOOLEAN                 Status = TRUE;
-	BOOLEAN                 Cancelled;
-	USHORT                  Idx;
-	UCHAR                   TID;
-	UCHAR                   BAWinSize;
-	//UINT32                  Value;
-	//UINT                    offset;
-
-
-	ASSERT(pEntry);
-
-	// find TID
-	TID = pFrame->BaParm.TID;
-
-	BAWinSize = min(((UCHAR)pFrame->BaParm.BufSize), (UCHAR)pAd->CommonCfg.BACapability.field.RxBAWinLimit);
-
-	// Intel patch
-	if (BAWinSize == 0)
-	{
-		BAWinSize = 64;
-	}
-
-	Idx = pEntry->BARecWcidArray[TID];
-
-
-	if (Idx == 0)
-	{
-		pBAEntry = BATableAllocRecEntry(pAd, &Idx);
-	}
-	else
-	{
-		pBAEntry = &pAd->BATable.BARecEntry[Idx];
-		// flush all pending reordering mpdus
-		ba_refresh_reordering_mpdus(pAd, pBAEntry);
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE,("%s(%ld): Idx = %d, BAWinSize(req %d) = %d\n", __func__, pAd->BATable.numAsRecipient, Idx,
-							 pFrame->BaParm.BufSize, BAWinSize));
-
-	// Start fill in parameters.
-	if (pBAEntry != NULL)
-	{
-		ASSERT(pBAEntry->list.qlen == 0);
-
-		pBAEntry->REC_BA_Status = Recipient_HandleRes;
-		pBAEntry->BAWinSize = BAWinSize;
-		pBAEntry->Wcid = pEntry->Aid;
-		pBAEntry->TID = TID;
-		pBAEntry->TimeOutValue = pFrame->TimeOutValue;
-		pBAEntry->REC_BA_Status = Recipient_Accept;
-		// initial sequence number
-		pBAEntry->LastIndSeq = RESET_RCV_SEQ; //pFrame->BaStartSeq.field.StartSeq;
-
-		printk("Start Seq = %08x\n",  pFrame->BaStartSeq.field.StartSeq);
-
-		if (pEntry->RXBAbitmap & (1<<TID))
-		{
-			RTMPCancelTimer(&pBAEntry->RECBATimer, &Cancelled);
-		}
-		else
-		{
-			RTMPInitTimer(pAd, &pBAEntry->RECBATimer, GET_TIMER_FUNCTION(BARecSessionIdleTimeout), pBAEntry, TRUE);
-		}
-
-#if 0	// for debugging
-		RTMPSetTimer(&pBAEntry->RECBATimer, REC_BA_SESSION_IDLE_TIMEOUT);
-#endif
-
-		// Set Bitmap flag.
-		pEntry->RXBAbitmap |= (1<<TID);
-		pEntry->BARecWcidArray[TID] = Idx;
-
-		pEntry->BADeclineBitmap &= ~(1<<TID);
-
-		// Set BA session mask in WCID table.
-		RT28XX_ADD_BA_SESSION_TO_ASIC(pAd, pEntry->Aid, TID);
-
-		DBGPRINT(RT_DEBUG_TRACE,("MACEntry[%d]RXBAbitmap = 0x%x. BARecWcidArray=%d\n",
-				pEntry->Aid, pEntry->RXBAbitmap, pEntry->BARecWcidArray[TID]));
-	}
-	else
-	{
-		Status = FALSE;
-		DBGPRINT(RT_DEBUG_TRACE,("Can't Accept ADDBA for %02x:%02x:%02x:%02x:%02x:%02x TID = %d\n",
-				PRINT_MAC(pEntry->Addr), TID));
-	}
-	return(Status);
-}
-
-
-BA_REC_ENTRY *BATableAllocRecEntry(
-								  IN  PRTMP_ADAPTER   pAd,
-								  OUT USHORT          *Idx)
-{
-	int             i;
-	BA_REC_ENTRY    *pBAEntry = NULL;
-
-
-	NdisAcquireSpinLock(&pAd->BATabLock);
-
-	if (pAd->BATable.numAsRecipient >= MAX_BARECI_SESSION)
-	{
-		printk("BA Recipeint Session (%ld) > %d\n", pAd->BATable.numAsRecipient,
-			MAX_BARECI_SESSION);
-		goto done;
-	}
-
-	// reserve idx 0 to identify BAWcidArray[TID] as empty
-	for (i=1; i < MAX_LEN_OF_BA_REC_TABLE; i++)
-	{
-		pBAEntry =&pAd->BATable.BARecEntry[i];
-		if ((pBAEntry->REC_BA_Status == Recipient_NONE))
-		{
-			// get one
-			pAd->BATable.numAsRecipient++;
-			pBAEntry->REC_BA_Status = Recipient_USED;
-			*Idx = i;
-			break;
-		}
-	}
-
-done:
-	NdisReleaseSpinLock(&pAd->BATabLock);
-	return pBAEntry;
-}
-
-BA_ORI_ENTRY *BATableAllocOriEntry(
-								  IN  PRTMP_ADAPTER   pAd,
-								  OUT USHORT          *Idx)
-{
-	int             i;
-	BA_ORI_ENTRY    *pBAEntry = NULL;
-
-	NdisAcquireSpinLock(&pAd->BATabLock);
-
-	if (pAd->BATable.numAsOriginator >= (MAX_LEN_OF_BA_ORI_TABLE))
-	{
-		goto done;
-	}
-
-	// reserve idx 0 to identify BAWcidArray[TID] as empty
-	for (i=1; i<MAX_LEN_OF_BA_ORI_TABLE; i++)
-	{
-		pBAEntry =&pAd->BATable.BAOriEntry[i];
-		if ((pBAEntry->ORI_BA_Status == Originator_NONE))
-		{
-			// get one
-			pAd->BATable.numAsOriginator++;
-			pBAEntry->ORI_BA_Status = Originator_USED;
-			pBAEntry->pAdapter = pAd;
-			*Idx = i;
-			break;
-		}
-	}
-
-done:
-	NdisReleaseSpinLock(&pAd->BATabLock);
-	return pBAEntry;
-}
-
-
-VOID BATableFreeOriEntry(
-						IN  PRTMP_ADAPTER   pAd,
-						IN  ULONG           Idx)
-{
-	BA_ORI_ENTRY    *pBAEntry = NULL;
-	MAC_TABLE_ENTRY *pEntry;
-
-
-	if ((Idx == 0) || (Idx >= MAX_LEN_OF_BA_ORI_TABLE))
-		return;
-
-	pBAEntry =&pAd->BATable.BAOriEntry[Idx];
-
-	if (pBAEntry->ORI_BA_Status != Originator_NONE)
-	{
-		pEntry = &pAd->MacTab.Content[pBAEntry->Wcid];
-		pEntry->BAOriWcidArray[pBAEntry->TID] = 0;
-
-
-		NdisAcquireSpinLock(&pAd->BATabLock);
-		if (pBAEntry->ORI_BA_Status == Originator_Done)
-		{
-		 	pEntry->TXBAbitmap &= (~(1<<(pBAEntry->TID) ));
-			DBGPRINT(RT_DEBUG_TRACE, ("BATableFreeOriEntry numAsOriginator= %ld\n", pAd->BATable.numAsRecipient));
-			// Erase Bitmap flag.
-		}
-
-		ASSERT(pAd->BATable.numAsOriginator != 0);
-
-		pAd->BATable.numAsOriginator -= 1;
-
-		pBAEntry->ORI_BA_Status = Originator_NONE;
-		pBAEntry->Token = 0;
-		NdisReleaseSpinLock(&pAd->BATabLock);
-	}
-}
-
-
-VOID BATableFreeRecEntry(
-						IN  PRTMP_ADAPTER   pAd,
-						IN  ULONG           Idx)
-{
-	BA_REC_ENTRY    *pBAEntry = NULL;
-	MAC_TABLE_ENTRY *pEntry;
-
-
-	if ((Idx == 0) || (Idx >= MAX_LEN_OF_BA_REC_TABLE))
-		return;
-
-	pBAEntry =&pAd->BATable.BARecEntry[Idx];
-
-	if (pBAEntry->REC_BA_Status != Recipient_NONE)
-	{
-		pEntry = &pAd->MacTab.Content[pBAEntry->Wcid];
-		pEntry->BARecWcidArray[pBAEntry->TID] = 0;
-
-		NdisAcquireSpinLock(&pAd->BATabLock);
-
-		ASSERT(pAd->BATable.numAsRecipient != 0);
-
-		pAd->BATable.numAsRecipient -= 1;
-
-		pBAEntry->REC_BA_Status = Recipient_NONE;
-		NdisReleaseSpinLock(&pAd->BATabLock);
-	}
-}
-
-
-VOID BAOriSessionTearDown(
-						 IN OUT  PRTMP_ADAPTER   pAd,
-						 IN      UCHAR           Wcid,
-						 IN      UCHAR           TID,
-						 IN      BOOLEAN         bPassive,
-						 IN      BOOLEAN         bForceSend)
-{
-	ULONG           Idx = 0;
-	BA_ORI_ENTRY    *pBAEntry;
-	BOOLEAN         Cancelled;
-
-	if (Wcid >= MAX_LEN_OF_MAC_TABLE)
-	{
-		return;
-	}
-
-	//
-	// Locate corresponding BA Originator Entry in BA Table with the (pAddr,TID).
-	//
-	Idx = pAd->MacTab.Content[Wcid].BAOriWcidArray[TID];
-	if ((Idx == 0) || (Idx >= MAX_LEN_OF_BA_ORI_TABLE))
-	{
-		if (bForceSend == TRUE)
-		{
-			// force send specified TID DelBA
-			MLME_DELBA_REQ_STRUCT   DelbaReq;
-			MLME_QUEUE_ELEM *Elem = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);
-
-			NdisZeroMemory(&DelbaReq, sizeof(DelbaReq));
-			NdisZeroMemory(Elem, sizeof(MLME_QUEUE_ELEM));
-
-			COPY_MAC_ADDR(DelbaReq.Addr, pAd->MacTab.Content[Wcid].Addr);
-			DelbaReq.Wcid = Wcid;
-			DelbaReq.TID = TID;
-			DelbaReq.Initiator = ORIGINATOR;
-#if 1
-			Elem->MsgLen  = sizeof(DelbaReq);
-			NdisMoveMemory(Elem->Msg, &DelbaReq, sizeof(DelbaReq));
-			MlmeDELBAAction(pAd, Elem);
-			kfree(Elem);
-#else
-			MlmeEnqueue(pAd, ACTION_STATE_MACHINE, MT2_MLME_ORI_DELBA_CATE, sizeof(MLME_DELBA_REQ_STRUCT), (PVOID)&DelbaReq);
-			RT28XX_MLME_HANDLER(pAd);
-#endif
-		}
-
-		return;
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE,("%s===>Wcid=%d.TID=%d \n", __func__, Wcid, TID));
-
-	pBAEntry = &pAd->BATable.BAOriEntry[Idx];
-	DBGPRINT(RT_DEBUG_TRACE,("\t===>Idx = %ld, Wcid=%d.TID=%d, ORI_BA_Status = %d \n", Idx, Wcid, TID, pBAEntry->ORI_BA_Status));
-	//
-	// Prepare DelBA action frame and send to the peer.
-	//
-	if ((bPassive == FALSE) && (TID == pBAEntry->TID) && (pBAEntry->ORI_BA_Status == Originator_Done))
-	{
-		MLME_DELBA_REQ_STRUCT   DelbaReq;
-		MLME_QUEUE_ELEM *Elem = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);
-
-		NdisZeroMemory(&DelbaReq, sizeof(DelbaReq));
-		NdisZeroMemory(Elem, sizeof(MLME_QUEUE_ELEM));
-
-		COPY_MAC_ADDR(DelbaReq.Addr, pAd->MacTab.Content[Wcid].Addr);
-		DelbaReq.Wcid = Wcid;
-		DelbaReq.TID = pBAEntry->TID;
-		DelbaReq.Initiator = ORIGINATOR;
-#if 1
-		Elem->MsgLen  = sizeof(DelbaReq);
-		NdisMoveMemory(Elem->Msg, &DelbaReq, sizeof(DelbaReq));
-		MlmeDELBAAction(pAd, Elem);
-		kfree(Elem);
-#else
-		MlmeEnqueue(pAd, ACTION_STATE_MACHINE, MT2_MLME_ORI_DELBA_CATE, sizeof(MLME_DELBA_REQ_STRUCT), (PVOID)&DelbaReq);
-		RT28XX_MLME_HANDLER(pAd);
-#endif
-	}
-	RTMPCancelTimer(&pBAEntry->ORIBATimer, &Cancelled);
-	BATableFreeOriEntry(pAd, Idx);
-
-	if (bPassive)
-	{
-		//BAOriSessionSetUp(pAd, &pAd->MacTab.Content[Wcid], TID, 0, 10000, TRUE);
-	}
-}
-
-VOID BARecSessionTearDown(
-						 IN OUT  PRTMP_ADAPTER   pAd,
-						 IN      UCHAR           Wcid,
-						 IN      UCHAR           TID,
-						 IN      BOOLEAN         bPassive)
-{
-	ULONG           Idx = 0;
-	BA_REC_ENTRY    *pBAEntry;
-
-	if (Wcid >= MAX_LEN_OF_MAC_TABLE)
-	{
-		return;
-	}
-
-	//
-	//  Locate corresponding BA Originator Entry in BA Table with the (pAddr,TID).
-	//
-	Idx = pAd->MacTab.Content[Wcid].BARecWcidArray[TID];
-	if (Idx == 0)
-		return;
-
-	DBGPRINT(RT_DEBUG_TRACE,("%s===>Wcid=%d.TID=%d \n", __func__, Wcid, TID));
-
-
-	pBAEntry = &pAd->BATable.BARecEntry[Idx];
-	DBGPRINT(RT_DEBUG_TRACE,("\t===>Idx = %ld, Wcid=%d.TID=%d, REC_BA_Status = %d \n", Idx, Wcid, TID, pBAEntry->REC_BA_Status));
-	//
-	// Prepare DelBA action frame and send to the peer.
-	//
-	if ((TID == pBAEntry->TID) && (pBAEntry->REC_BA_Status == Recipient_Accept))
-	{
-		MLME_DELBA_REQ_STRUCT   DelbaReq;
-		BOOLEAN 				Cancelled;
-		MLME_QUEUE_ELEM *Elem = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);
-		//ULONG   offset;
-		//UINT32  VALUE;
-
-		RTMPCancelTimer(&pBAEntry->RECBATimer, &Cancelled);
-
-		//
-		// 1. Send DELBA Action Frame
-		//
-		if (bPassive == FALSE)
-		{
-			NdisZeroMemory(&DelbaReq, sizeof(DelbaReq));
-			NdisZeroMemory(Elem, sizeof(MLME_QUEUE_ELEM));
-
-			COPY_MAC_ADDR(DelbaReq.Addr, pAd->MacTab.Content[Wcid].Addr);
-			DelbaReq.Wcid = Wcid;
-			DelbaReq.TID = TID;
-			DelbaReq.Initiator = RECIPIENT;
-#if 1
-			Elem->MsgLen  = sizeof(DelbaReq);
-			NdisMoveMemory(Elem->Msg, &DelbaReq, sizeof(DelbaReq));
-			MlmeDELBAAction(pAd, Elem);
-			kfree(Elem);
-#else
-			MlmeEnqueue(pAd, ACTION_STATE_MACHINE, MT2_MLME_ORI_DELBA_CATE, sizeof(MLME_DELBA_REQ_STRUCT), (PVOID)&DelbaReq);
-			RT28XX_MLME_HANDLER(pAd);
-#endif
-		}
-
-
-		//
-		// 2. Free resource of BA session
-		//
-		// flush all pending reordering mpdus
-		ba_refresh_reordering_mpdus(pAd, pBAEntry);
-
-		NdisAcquireSpinLock(&pAd->BATabLock);
-
-		// Erase Bitmap flag.
-		pBAEntry->LastIndSeq = RESET_RCV_SEQ;
-		pBAEntry->BAWinSize = 0;
-		// Erase Bitmap flag at software mactable
-		pAd->MacTab.Content[Wcid].RXBAbitmap &= (~(1<<(pBAEntry->TID)));
-		pAd->MacTab.Content[Wcid].BARecWcidArray[TID] = 0;
-
-		RT28XX_DEL_BA_SESSION_FROM_ASIC(pAd, Wcid, TID);
-
-		NdisReleaseSpinLock(&pAd->BATabLock);
-
-	}
-
-	BATableFreeRecEntry(pAd, Idx);
-}
-
-VOID BASessionTearDownALL(
-						 IN OUT  PRTMP_ADAPTER pAd,
-						 IN      UCHAR Wcid)
-{
-	int i;
-
-	for (i=0; i<NUM_OF_TID; i++)
-	{
-		BAOriSessionTearDown(pAd, Wcid, i, FALSE, FALSE);
-		BARecSessionTearDown(pAd, Wcid, i, FALSE);
-	}
-}
-
-
-/*
-	==========================================================================
-	Description:
-		Retry sending ADDBA Reqest.
-
-	IRQL = DISPATCH_LEVEL
-
-	Parametrs:
-	p8023Header: if this is already 802.3 format, p8023Header is NULL
-
-	Return	: TRUE if put into rx reordering buffer, shouldn't indicaterxhere.
-				FALSE , then continue indicaterx at this moment.
-	==========================================================================
- */
-VOID BAOriSessionSetupTimeout(
-    IN PVOID SystemSpecific1,
-    IN PVOID FunctionContext,
-    IN PVOID SystemSpecific2,
-    IN PVOID SystemSpecific3)
-{
-	BA_ORI_ENTRY    *pBAEntry = (BA_ORI_ENTRY *)FunctionContext;
-	MAC_TABLE_ENTRY *pEntry;
-	PRTMP_ADAPTER   pAd;
-
-	if (pBAEntry == NULL)
-		return;
-
-	pAd = pBAEntry->pAdapter;
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// Do nothing if monitor mode is on
-		if (MONITOR_ON(pAd))
-			return;
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef RALINK_ATE
-	// Nothing to do in ATE mode.
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-	pEntry = &pAd->MacTab.Content[pBAEntry->Wcid];
-
-	if ((pBAEntry->ORI_BA_Status == Originator_WaitRes) && (pBAEntry->Token < ORI_SESSION_MAX_RETRY))
-	{
-		MLME_ADDBA_REQ_STRUCT    AddbaReq;
-
-		NdisZeroMemory(&AddbaReq, sizeof(AddbaReq));
-		COPY_MAC_ADDR(AddbaReq.pAddr, pEntry->Addr);
-		AddbaReq.Wcid = (UCHAR)(pEntry->Aid);
-		AddbaReq.TID = pBAEntry->TID;
-		AddbaReq.BaBufSize = pAd->CommonCfg.BACapability.field.RxBAWinLimit;
-		AddbaReq.TimeOutValue = 0;
-		AddbaReq.Token = pBAEntry->Token;
-		MlmeEnqueue(pAd, ACTION_STATE_MACHINE, MT2_MLME_ADD_BA_CATE, sizeof(MLME_ADDBA_REQ_STRUCT), (PVOID)&AddbaReq);
-		RT28XX_MLME_HANDLER(pAd);
-		DBGPRINT(RT_DEBUG_TRACE,("BA Ori Session Timeout(%d) : Send ADD BA again\n", pBAEntry->Token));
-
-		pBAEntry->Token++;
-		RTMPSetTimer(&pBAEntry->ORIBATimer, ORI_BA_SESSION_TIMEOUT);
-	}
-	else
-	{
-		BATableFreeOriEntry(pAd, pEntry->BAOriWcidArray[pBAEntry->TID]);
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-		Retry sending ADDBA Reqest.
-
-	IRQL = DISPATCH_LEVEL
-
-	Parametrs:
-	p8023Header: if this is already 802.3 format, p8023Header is NULL
-
-	Return	: TRUE if put into rx reordering buffer, shouldn't indicaterxhere.
-				FALSE , then continue indicaterx at this moment.
-	==========================================================================
- */
-VOID BARecSessionIdleTimeout(
-    IN PVOID SystemSpecific1,
-    IN PVOID FunctionContext,
-    IN PVOID SystemSpecific2,
-    IN PVOID SystemSpecific3)
-{
-
-	BA_REC_ENTRY    *pBAEntry = (BA_REC_ENTRY *)FunctionContext;
-	PRTMP_ADAPTER   pAd;
-	ULONG           Now32;
-
-	if (pBAEntry == NULL)
-		return;
-
-	if ((pBAEntry->REC_BA_Status == Recipient_Accept))
-	{
-		NdisGetSystemUpTime(&Now32);
-
-		if (RTMP_TIME_AFTER((unsigned long)Now32, (unsigned long)(pBAEntry->LastIndSeqAtTimer + REC_BA_SESSION_IDLE_TIMEOUT)))
-		{
-			pAd = pBAEntry->pAdapter;
-			// flush all pending reordering mpdus
-			ba_refresh_reordering_mpdus(pAd, pBAEntry);
-			printk("%ld: REC BA session Timeout\n", Now32);
-		}
-	}
-}
-
-
-VOID PeerAddBAReqAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-
-{
-	//	7.4.4.1
-	//ULONG	Idx;
-	UCHAR   Status = 1;
-	UCHAR   pAddr[6];
-	FRAME_ADDBA_RSP ADDframe;
-	PUCHAR         pOutBuffer = NULL;
-	NDIS_STATUS     NStatus;
-	PFRAME_ADDBA_REQ  pAddreqFrame = NULL;
-	//UCHAR		BufSize;
-	ULONG       FrameLen;
-	PULONG      ptemp;
-	PMAC_TABLE_ENTRY	pMacEntry;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("%s ==> (Wcid = %d)\n", __func__, Elem->Wcid));
-
-	//hex_dump("AddBAReq", Elem->Msg, Elem->MsgLen);
-
-	//ADDBA Request from unknown peer, ignore this.
-	if (Elem->Wcid >= MAX_LEN_OF_MAC_TABLE)
-		return;
-
-	pMacEntry = &pAd->MacTab.Content[Elem->Wcid];
-	DBGPRINT(RT_DEBUG_TRACE,("BA - PeerAddBAReqAction----> \n"));
-	ptemp = (PULONG)Elem->Msg;
-	//DBGPRINT_RAW(RT_DEBUG_EMU, ("%08x:: %08x:: %08x:: %08x:: %08x:: %08x:: %08x:: %08x:: %08x\n", *(ptemp), *(ptemp+1), *(ptemp+2), *(ptemp+3), *(ptemp+4), *(ptemp+5), *(ptemp+6), *(ptemp+7), *(ptemp+8)));
-
-	if (PeerAddBAReqActionSanity(pAd, Elem->Msg, Elem->MsgLen, pAddr))
-	{
-
-		if ((pAd->CommonCfg.bBADecline == FALSE) && IS_HT_STA(pMacEntry))
-		{
-			pAddreqFrame = (PFRAME_ADDBA_REQ)(&Elem->Msg[0]);
-			printk("Rcv Wcid(%d) AddBAReq\n", Elem->Wcid);
-			if (BARecSessionAdd(pAd, &pAd->MacTab.Content[Elem->Wcid], pAddreqFrame))
-				Status = 0;
-			else
-				Status = 38; // more parameters have invalid values
-		}
-		else
-		{
-			Status = 37; // the request has been declined.
-		}
-	}
-
-	if (pAd->MacTab.Content[Elem->Wcid].ValidAsCLI)
-		ASSERT(pAd->MacTab.Content[Elem->Wcid].Sst == SST_ASSOC);
-
-	pAddreqFrame = (PFRAME_ADDBA_REQ)(&Elem->Msg[0]);
-	// 2. Always send back ADDBA Response
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);	 //Get an unused nonpaged memory
-	if (NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_TRACE,("ACTION - PeerBAAction() allocate memory failed \n"));
-		return;
-	}
-
-	NdisZeroMemory(&ADDframe, sizeof(FRAME_ADDBA_RSP));
-	// 2-1. Prepare ADDBA Response frame.
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if (ADHOC_ON(pAd))
-			ActHeaderInit(pAd, &ADDframe.Hdr, pAddr, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
-		else
-#ifdef QOS_DLS_SUPPORT
-		if (pAd->MacTab.Content[Elem->Wcid].ValidAsDls)
-			ActHeaderInit(pAd, &ADDframe.Hdr, pAddr, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
-		else
-#endif // QOS_DLS_SUPPORT //
-			ActHeaderInit(pAd, &ADDframe.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAddr);
-	}
-#endif // CONFIG_STA_SUPPORT //
-	ADDframe.Category = CATEGORY_BA;
-	ADDframe.Action = ADDBA_RESP;
-	ADDframe.Token = pAddreqFrame->Token;
-	// What is the Status code??  need to check.
-	ADDframe.StatusCode = Status;
-	ADDframe.BaParm.BAPolicy = IMMED_BA;
-	ADDframe.BaParm.AMSDUSupported = 0;
-	ADDframe.BaParm.TID = pAddreqFrame->BaParm.TID;
-	ADDframe.BaParm.BufSize = min(((UCHAR)pAddreqFrame->BaParm.BufSize), (UCHAR)pAd->CommonCfg.BACapability.field.RxBAWinLimit);
-	if (ADDframe.BaParm.BufSize == 0)
-	{
-		ADDframe.BaParm.BufSize = 64;
-	}
-	ADDframe.TimeOutValue = 0; //pAddreqFrame->TimeOutValue;
-
-	*(USHORT *)(&ADDframe.BaParm) = cpu2le16(*(USHORT *)(&ADDframe.BaParm));
-	ADDframe.StatusCode = cpu2le16(ADDframe.StatusCode);
-	ADDframe.TimeOutValue = cpu2le16(ADDframe.TimeOutValue);
-
-	MakeOutgoingFrame(pOutBuffer,               &FrameLen,
-					  sizeof(FRAME_ADDBA_RSP),  &ADDframe,
-			  END_OF_ARGS);
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("%s(%d): TID(%d), BufSize(%d) <== \n", __func__, Elem->Wcid, ADDframe.BaParm.TID,
-							  ADDframe.BaParm.BufSize));
-}
-
-
-VOID PeerAddBARspAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-
-{
-	//UCHAR		Idx, i;
-	//PUCHAR		   pOutBuffer = NULL;
-	PFRAME_ADDBA_RSP    pFrame = NULL;
-	//PBA_ORI_ENTRY		pBAEntry;
-
-	//ADDBA Response from unknown peer, ignore this.
-	if (Elem->Wcid >= MAX_LEN_OF_MAC_TABLE)
-		return;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("%s ==> Wcid(%d)\n", __func__, Elem->Wcid));
-
-	//hex_dump("PeerAddBARspAction()", Elem->Msg, Elem->MsgLen);
-
-	if (PeerAddBARspActionSanity(pAd, Elem->Msg, Elem->MsgLen))
-	{
-		pFrame = (PFRAME_ADDBA_RSP)(&Elem->Msg[0]);
-
-		DBGPRINT(RT_DEBUG_TRACE, ("\t\t StatusCode = %d\n", pFrame->StatusCode));
-		switch (pFrame->StatusCode)
-		{
-			case 0:
-				// I want a BAsession with this peer as an originator.
-				BAOriSessionAdd(pAd, &pAd->MacTab.Content[Elem->Wcid], pFrame);
-				break;
-			default:
-				// check status == USED ???
-				BAOriSessionTearDown(pAd, Elem->Wcid, pFrame->BaParm.TID, TRUE, FALSE);
-				break;
-		}
-		// Rcv Decline StatusCode
-		if ((pFrame->StatusCode == 37)
-#ifdef CONFIG_STA_SUPPORT
-            || ((pAd->OpMode == OPMODE_STA) && STA_TGN_WIFI_ON(pAd) && (pFrame->StatusCode != 0))
-#endif // CONFIG_STA_SUPPORT //
-            )
-		{
-			pAd->MacTab.Content[Elem->Wcid].BADeclineBitmap |= 1<<pFrame->BaParm.TID;
-		}
-	}
-}
-
-VOID PeerDelBAAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-
-{
-	//UCHAR				Idx;
-	//PUCHAR				pOutBuffer = NULL;
-	PFRAME_DELBA_REQ    pDelFrame = NULL;
-
-	DBGPRINT(RT_DEBUG_TRACE,("%s ==>\n", __func__));
-	//DELBA Request from unknown peer, ignore this.
-	if (PeerDelBAActionSanity(pAd, Elem->Wcid, Elem->Msg, Elem->MsgLen))
-	{
-		pDelFrame = (PFRAME_DELBA_REQ)(&Elem->Msg[0]);
-		if (pDelFrame->DelbaParm.Initiator == ORIGINATOR)
-		{
-			DBGPRINT(RT_DEBUG_TRACE,("BA - PeerDelBAAction----> ORIGINATOR\n"));
-			BARecSessionTearDown(pAd, Elem->Wcid, pDelFrame->DelbaParm.TID, TRUE);
-		}
-		else
-		{
-			DBGPRINT(RT_DEBUG_TRACE,("BA - PeerDelBAAction----> RECIPIENT, Reason = %d\n",  pDelFrame->ReasonCode));
-			//hex_dump("DelBA Frame", pDelFrame, Elem->MsgLen);
-			BAOriSessionTearDown(pAd, Elem->Wcid, pDelFrame->DelbaParm.TID, TRUE, FALSE);
-		}
-	}
-}
-
-
-BOOLEAN CntlEnqueueForRecv(
-						  IN PRTMP_ADAPTER		pAd,
-						  IN ULONG				Wcid,
-						  IN ULONG				MsgLen,
-						  IN PFRAME_BA_REQ		pMsg)
-{
-	PFRAME_BA_REQ   pFrame = pMsg;
-	//PRTMP_REORDERBUF	pBuffer;
-	//PRTMP_REORDERBUF	pDmaBuf;
-	PBA_REC_ENTRY pBAEntry;
-	//BOOLEAN 	Result;
-	ULONG   Idx;
-	//UCHAR	NumRxPkt;
-	UCHAR	TID;//, i;
-
-	TID = (UCHAR)pFrame->BARControl.TID;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("%s(): BAR-Wcid(%ld), Tid (%d)\n", __func__, Wcid, TID));
-	//hex_dump("BAR", (PCHAR) pFrame, MsgLen);
-	// Do nothing if the driver is starting halt state.
-	// This might happen when timer already been fired before cancel timer with mlmehalt
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
-		return FALSE;
-
-	// First check the size, it MUST not exceed the mlme queue size
-	if (MsgLen > MGMT_DMA_BUFFER_SIZE)
-	{
-		DBGPRINT_ERR(("CntlEnqueueForRecv: frame too large, size = %ld \n", MsgLen));
-		return FALSE;
-	}
-	else if (MsgLen != sizeof(FRAME_BA_REQ))
-	{
-		DBGPRINT_ERR(("CntlEnqueueForRecv: BlockAck Request frame length size = %ld incorrect\n", MsgLen));
-		return FALSE;
-	}
-	else if (MsgLen != sizeof(FRAME_BA_REQ))
-	{
-		DBGPRINT_ERR(("CntlEnqueueForRecv: BlockAck Request frame length size = %ld incorrect\n", MsgLen));
-		return FALSE;
-	}
-
-	if ((Wcid < MAX_LEN_OF_MAC_TABLE) && (TID < 8))
-		{
-		// if this receiving packet is from SA that is in our OriEntry. Since WCID <9 has direct mapping. no need search.
-		Idx = pAd->MacTab.Content[Wcid].BARecWcidArray[TID];
-		pBAEntry = &pAd->BATable.BARecEntry[Idx];
-		}
-		else
-		{
-		return FALSE;
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("BAR(%ld) : Tid (%d) - %04x:%04x\n", Wcid, TID, pFrame->BAStartingSeq.field.StartSeq, pBAEntry->LastIndSeq ));
-
-	if (SEQ_SMALLER(pBAEntry->LastIndSeq, pFrame->BAStartingSeq.field.StartSeq, MAXSEQ))
-	{
-		//printk("BAR Seq = %x, LastIndSeq = %x\n", pFrame->BAStartingSeq.field.StartSeq, pBAEntry->LastIndSeq);
-		ba_indicate_reordering_mpdus_le_seq(pAd, pBAEntry, pFrame->BAStartingSeq.field.StartSeq);
-		pBAEntry->LastIndSeq = (pFrame->BAStartingSeq.field.StartSeq == 0) ? MAXSEQ :(pFrame->BAStartingSeq.field.StartSeq -1);
-	}
-	//ba_refresh_reordering_mpdus(pAd, pBAEntry);
-	return TRUE;
-}
-
-/*
-Description : Send PSMP Action frame If PSMP mode switches.
-*/
-VOID SendPSMPAction(
-				   IN PRTMP_ADAPTER		pAd,
-				   IN UCHAR				Wcid,
-				   IN UCHAR				Psmp)
-{
-	PUCHAR          pOutBuffer = NULL;
-	NDIS_STATUS     NStatus;
-	//ULONG           Idx;
-	FRAME_PSMP_ACTION   Frame;
-	ULONG           FrameLen;
-
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);	 //Get an unused nonpaged memory
-	if (NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("BA - MlmeADDBAAction() allocate memory failed \n"));
-		return;
-	}
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		ActHeaderInit(pAd, &Frame.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->MacTab.Content[Wcid].Addr);
-#endif // CONFIG_STA_SUPPORT //
-
-	Frame.Category = CATEGORY_HT;
-	Frame.Action = SMPS_ACTION;
-	switch (Psmp)
-	{
-		case MMPS_ENABLE:
-			Frame.Psmp = 0;
-			break;
-		case MMPS_DYNAMIC:
-			Frame.Psmp = 3;
-			break;
-		case MMPS_STATIC:
-			Frame.Psmp = 1;
-			break;
-	}
-	MakeOutgoingFrame(pOutBuffer,               &FrameLen,
-					  sizeof(FRAME_PSMP_ACTION),      &Frame,
-					  END_OF_ARGS);
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-	DBGPRINT(RT_DEBUG_ERROR,("HT - SendPSMPAction( %d )  \n", Frame.Psmp));
-}
-
-
-#define RADIO_MEASUREMENT_REQUEST_ACTION	0
-
-typedef struct PACKED
-{
-	UCHAR	RegulatoryClass;
-	UCHAR	ChannelNumber;
-	USHORT	RandomInterval;
-	USHORT	MeasurementDuration;
-	UCHAR	MeasurementMode;
-	UCHAR   BSSID[MAC_ADDR_LEN];
-	UCHAR	ReportingCondition;
-	UCHAR	Threshold;
-	UCHAR   SSIDIE[2];			// 2 byte
-} BEACON_REQUEST;
-
-typedef struct PACKED
-{
-	UCHAR	ID;
-	UCHAR	Length;
-	UCHAR	Token;
-	UCHAR	RequestMode;
-	UCHAR	Type;
-} MEASUREMENT_REQ;
-
-
-
-
-void convert_reordering_packet_to_preAMSDU_or_802_3_packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN  UCHAR			FromWhichBSSID)
-{
-	PNDIS_PACKET	pRxPkt;
-	UCHAR			Header802_3[LENGTH_802_3];
-
-	// 1. get 802.3 Header
-	// 2. remove LLC
-	// 		a. pointer pRxBlk->pData to payload
-	//      b. modify pRxBlk->DataSize
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
-#endif // CONFIG_STA_SUPPORT //
-
-	ASSERT(pRxBlk->pRxPacket);
-	pRxPkt = RTPKT_TO_OSPKT(pRxBlk->pRxPacket);
-
-	RTPKT_TO_OSPKT(pRxPkt)->dev = get_netdev_from_bssid(pAd, FromWhichBSSID);
-	RTPKT_TO_OSPKT(pRxPkt)->data = pRxBlk->pData;
-	RTPKT_TO_OSPKT(pRxPkt)->len = pRxBlk->DataSize;
-	RTPKT_TO_OSPKT(pRxPkt)->tail = RTPKT_TO_OSPKT(pRxPkt)->data + RTPKT_TO_OSPKT(pRxPkt)->len;
-
-	//
-	// copy 802.3 header, if necessary
-	//
-	if (!RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU))
-	{
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-#ifdef LINUX
-			NdisMoveMemory(skb_push(pRxPkt, LENGTH_802_3), Header802_3, LENGTH_802_3);
-#endif
-#ifdef UCOS
-			NdisMoveMemory(net_pkt_push(pRxPkt, LENGTH_802_3), Header802_3, LENGTH_802_3);
-#endif
-		}
-#endif // CONFIG_STA_SUPPORT //
-	}
-}
-
-
-#define INDICATE_LEGACY_OR_AMSDU(_pAd, _pRxBlk, _fromWhichBSSID)		\
-	do																	\
-	{																	\
-    	if (RX_BLK_TEST_FLAG(_pRxBlk, fRX_AMSDU))						\
-    	{																\
-    		Indicate_AMSDU_Packet(_pAd, _pRxBlk, _fromWhichBSSID);		\
-    	}																\
-		else if (RX_BLK_TEST_FLAG(_pRxBlk, fRX_EAP))					\
-		{																\
-			Indicate_EAPOL_Packet(_pAd, _pRxBlk, _fromWhichBSSID);		\
-		}																\
-    	else															\
-    	{																\
-    		Indicate_Legacy_Packet(_pAd, _pRxBlk, _fromWhichBSSID);		\
-    	}																\
-	} while (0);
-
-
-
-static VOID ba_enqueue_reordering_packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PBA_REC_ENTRY	pBAEntry,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID)
-{
-	struct reordering_mpdu *mpdu_blk;
-	UINT16	Sequence = (UINT16) pRxBlk->pHeader->Sequence;
-
-	mpdu_blk = ba_mpdu_blk_alloc(pAd);
-	if (mpdu_blk != NULL)
-	{
-		// Write RxD buffer address & allocated buffer length
-		NdisAcquireSpinLock(&pBAEntry->RxReRingLock);
-
-		mpdu_blk->Sequence = Sequence;
-
-		mpdu_blk->bAMSDU = RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU);
-
-		convert_reordering_packet_to_preAMSDU_or_802_3_packet(pAd, pRxBlk, FromWhichBSSID);
-
-		STATS_INC_RX_PACKETS(pAd, FromWhichBSSID);
-
-        //
-		// it is necessary for reordering packet to record
-		// which BSS it come from
-		//
-		RTMP_SET_PACKET_IF(pRxBlk->pRxPacket, FromWhichBSSID);
-
-		mpdu_blk->pPacket = pRxBlk->pRxPacket;
-
-		if (ba_reordering_mpdu_insertsorted(&pBAEntry->list, mpdu_blk) == FALSE)
-		{
-			// had been already within reordering list
-			// don't indicate
-			RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_SUCCESS);
-			ba_mpdu_blk_free(pAd, mpdu_blk);
-		}
-
-		ASSERT((0<= pBAEntry->list.qlen)  && (pBAEntry->list.qlen <= pBAEntry->BAWinSize));
-		NdisReleaseSpinLock(&pBAEntry->RxReRingLock);
-	}
-	else
-	{
-#if 0
-		DBGPRINT(RT_DEBUG_ERROR,  ("!!! (%d:%d) Can't allocate reordering mpdu blk\n",
-								   blk_count, pBAEntry->list.qlen));
-#else
-		DBGPRINT(RT_DEBUG_ERROR,  ("!!! (%d) Can't allocate reordering mpdu blk\n",
-								   pBAEntry->list.qlen));
-#endif
-		/*
-		 * flush all pending reordering mpdus
-		 * and receving mpdu to upper layer
-		 * make tcp/ip to take care reordering mechanism
-		 */
-		//ba_refresh_reordering_mpdus(pAd, pBAEntry);
-		ba_indicate_reordering_mpdus_le_seq(pAd, pBAEntry, Sequence);
-
-		pBAEntry->LastIndSeq = Sequence;
-		INDICATE_LEGACY_OR_AMSDU(pAd, pRxBlk, FromWhichBSSID);
-	}
-}
-
-
-/*
-	==========================================================================
-	Description:
-		Indicate this packet to upper layer or put it into reordering buffer
-
-	Parametrs:
-		pRxBlk         : carry necessary packet info 802.11 format
-		FromWhichBSSID : the packet received from which BSS
-
-	Return	:
-			  none
-
-	Note    :
-	          the packet queued into reordering buffer need to cover to 802.3 format
-			  or pre_AMSDU format
-	==========================================================================
- */
-
-VOID Indicate_AMPDU_Packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID)
-{
-	USHORT				Idx;
-	PBA_REC_ENTRY		pBAEntry = NULL;
-	UINT16				Sequence = pRxBlk->pHeader->Sequence;
-	ULONG				Now32;
-	UCHAR				Wcid = pRxBlk->pRxWI->WirelessCliID;
-	UCHAR				TID = pRxBlk->pRxWI->TID;
-
-
-	if (!RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU) &&  (pRxBlk->DataSize > MAX_RX_PKT_LEN))
-	{
-#if 0 // sample take off, no use
-		static int err_size;
-
-		err_size++;
-		if (err_size > 20) {
-			 printk("AMPDU DataSize = %d\n", pRxBlk->DataSize);
-			 hex_dump("802.11 Header", (UCHAR *)pRxBlk->pHeader, 24);
-			 hex_dump("Payload", pRxBlk->pData, 64);
-			 err_size = 0;
-		}
-#endif
-		// release packet
-		RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
-		return;
-	}
-
-
-#if 0 // test
-	/* Rec BA Session had been torn down */
-	INDICATE_LEGACY_OR_AMSDU(pAd, pRxBlk, FromWhichBSSID);
-	return;
-#endif
-
-	if (Wcid < MAX_LEN_OF_MAC_TABLE)
-	{
-		Idx = pAd->MacTab.Content[Wcid].BARecWcidArray[TID];
-		if (Idx == 0)
-		{
-			/* Rec BA Session had been torn down */
-			INDICATE_LEGACY_OR_AMSDU(pAd, pRxBlk, FromWhichBSSID);
-			return;
-		}
-		pBAEntry = &pAd->BATable.BARecEntry[Idx];
-	}
-	else
-	{
-		// impossible !!!
-		ASSERT(0);
-		// release packet
-		RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
-		return;
-	}
-
-	ASSERT(pBAEntry);
-
-	// update last rx time
-	NdisGetSystemUpTime(&Now32);
-
-	pBAEntry->rcvSeq = Sequence;
-
-
-	ba_flush_reordering_timeout_mpdus(pAd, pBAEntry, Now32);
-	pBAEntry->LastIndSeqAtTimer = Now32;
-
-	//
-	// Reset Last Indicate Sequence
-	//
-	if (pBAEntry->LastIndSeq == RESET_RCV_SEQ)
-	{
-		ASSERT((pBAEntry->list.qlen == 0) && (pBAEntry->list.next == NULL));
-
-		// reset rcv sequence of BA session
-		pBAEntry->LastIndSeq = Sequence;
-		pBAEntry->LastIndSeqAtTimer = Now32;
-		INDICATE_LEGACY_OR_AMSDU(pAd, pRxBlk, FromWhichBSSID);
-		return;
-	}
-
-
-	//
-	// I. Check if in order.
-	//
-	if (SEQ_STEPONE(Sequence, pBAEntry->LastIndSeq, MAXSEQ))
-	{
-		USHORT  LastIndSeq;
-
-		pBAEntry->LastIndSeq = Sequence;
-		INDICATE_LEGACY_OR_AMSDU(pAd, pRxBlk, FromWhichBSSID);
- 		LastIndSeq = ba_indicate_reordering_mpdus_in_order(pAd, pBAEntry, pBAEntry->LastIndSeq);
-		if (LastIndSeq != RESET_RCV_SEQ)
-		{
-			pBAEntry->LastIndSeq = LastIndSeq;
-		}
-		pBAEntry->LastIndSeqAtTimer = Now32;
-	}
-	//
-	// II. Drop Duplicated Packet
-	//
-	else if (Sequence == pBAEntry->LastIndSeq)
-	{
-
-		// drop and release packet
-		pBAEntry->nDropPacket++;
-		RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
-	}
-	//
-	// III. Drop Old Received Packet
-	//
-	else if (SEQ_SMALLER(Sequence, pBAEntry->LastIndSeq, MAXSEQ))
-	{
-
-		// drop and release packet
-		pBAEntry->nDropPacket++;
-		RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
-	}
-	//
-	// IV. Receive Sequence within Window Size
-	//
-	else if (SEQ_SMALLER(Sequence, (((pBAEntry->LastIndSeq+pBAEntry->BAWinSize+1)) & MAXSEQ), MAXSEQ))
-	{
-		ba_enqueue_reordering_packet(pAd, pBAEntry, pRxBlk, FromWhichBSSID);
-	}
-	//
-	// V. Receive seq surpasses Win(lastseq + nMSDU). So refresh all reorder buffer
-	//
-	else
-	{
-#if 0
-		ba_refresh_reordering_mpdus(pAd, pBAEntry);
-		INDICATE_LEGACY_OR_AMSDU(pAd, pRxBlk, FromWhichBSSID);
-#else
-		LONG WinStartSeq, TmpSeq;
-
-
-		TmpSeq = Sequence - (pBAEntry->BAWinSize) -1;
-		if (TmpSeq < 0)
-		{
-			TmpSeq = (MAXSEQ+1) + TmpSeq;
-		}
-		WinStartSeq = (TmpSeq+1) & MAXSEQ;
-		ba_indicate_reordering_mpdus_le_seq(pAd, pBAEntry, WinStartSeq);
-		pBAEntry->LastIndSeq = WinStartSeq; //TmpSeq;
-
-		pBAEntry->LastIndSeqAtTimer = Now32;
-
-		ba_enqueue_reordering_packet(pAd, pBAEntry, pRxBlk, FromWhichBSSID);
-
-		TmpSeq = ba_indicate_reordering_mpdus_in_order(pAd, pBAEntry, pBAEntry->LastIndSeq);
-		if (TmpSeq != RESET_RCV_SEQ)
-		{
-			pBAEntry->LastIndSeq = TmpSeq;
-		}
-#endif
-	}
-}
-
-#endif // DOT11_N_SUPPORT //
-
+#include "../../rt2860/common/ba_action.c"
diff --git a/drivers/staging/rt2870/common/cmm_data.c b/drivers/staging/rt2870/common/cmm_data.c
index f8e0ebd7bca..df775c3cf69 100644
--- a/drivers/staging/rt2870/common/cmm_data.c
+++ b/drivers/staging/rt2870/common/cmm_data.c
@@ -1,2731 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-*/
-
-#include "../rt_config.h"
-
-#define MAX_TX_IN_TBTT		(16)
-
-
-UCHAR	SNAP_802_1H[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};
-UCHAR	SNAP_BRIDGE_TUNNEL[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8};
-// Add Cisco Aironet SNAP heade for CCX2 support
-UCHAR	SNAP_AIRONET[] = {0xaa, 0xaa, 0x03, 0x00, 0x40, 0x96, 0x00, 0x00};
-UCHAR	CKIP_LLC_SNAP[] = {0xaa, 0xaa, 0x03, 0x00, 0x40, 0x96, 0x00, 0x02};
-UCHAR	EAPOL_LLC_SNAP[]= {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00, 0x88, 0x8e};
-UCHAR	EAPOL[] = {0x88, 0x8e};
-UCHAR   TPID[] = {0x81, 0x00}; /* VLAN related */
-
-UCHAR	IPX[] = {0x81, 0x37};
-UCHAR	APPLE_TALK[] = {0x80, 0xf3};
-UCHAR	RateIdToPlcpSignal[12] = {
-	 0, /* RATE_1 */	1, /* RATE_2 */ 	2, /* RATE_5_5 */	3, /* RATE_11 */	// see BBP spec
-	11, /* RATE_6 */   15, /* RATE_9 */    10, /* RATE_12 */   14, /* RATE_18 */	// see IEEE802.11a-1999 p.14
-	 9, /* RATE_24 */  13, /* RATE_36 */	8, /* RATE_48 */   12  /* RATE_54 */ }; // see IEEE802.11a-1999 p.14
-
-UCHAR	 OfdmSignalToRateId[16] = {
-	RATE_54,  RATE_54,	RATE_54,  RATE_54,	// OFDM PLCP Signal = 0,  1,  2,  3 respectively
-	RATE_54,  RATE_54,	RATE_54,  RATE_54,	// OFDM PLCP Signal = 4,  5,  6,  7 respectively
-	RATE_48,  RATE_24,	RATE_12,  RATE_6,	// OFDM PLCP Signal = 8,  9,  10, 11 respectively
-	RATE_54,  RATE_36,	RATE_18,  RATE_9,	// OFDM PLCP Signal = 12, 13, 14, 15 respectively
-};
-
-UCHAR	 OfdmRateToRxwiMCS[12] = {
-	0,  0,	0,  0,
-	0,  1,	2,  3,	// OFDM rate 6,9,12,18 = rxwi mcs 0,1,2,3
-	4,  5,	6,  7,	// OFDM rate 24,36,48,54 = rxwi mcs 4,5,6,7
-};
-UCHAR	 RxwiMCSToOfdmRate[12] = {
-	RATE_6,  RATE_9,	RATE_12,  RATE_18,
-	RATE_24,  RATE_36,	RATE_48,  RATE_54,	// OFDM rate 6,9,12,18 = rxwi mcs 0,1,2,3
-	4,  5,	6,  7,	// OFDM rate 24,36,48,54 = rxwi mcs 4,5,6,7
-};
-
-char*   MCSToMbps[] = {"1Mbps","2Mbps","5.5Mbps","11Mbps","06Mbps","09Mbps","12Mbps","18Mbps","24Mbps","36Mbps","48Mbps","54Mbps","MM-0","MM-1","MM-2","MM-3","MM-4","MM-5","MM-6","MM-7","MM-8","MM-9","MM-10","MM-11","MM-12","MM-13","MM-14","MM-15","MM-32","ee1","ee2","ee3"};
-
-UCHAR default_cwmin[]={CW_MIN_IN_BITS, CW_MIN_IN_BITS, CW_MIN_IN_BITS-1, CW_MIN_IN_BITS-2};
-//UCHAR default_cwmax[]={CW_MAX_IN_BITS, CW_MAX_IN_BITS, CW_MIN_IN_BITS, CW_MIN_IN_BITS-1};
-UCHAR default_sta_aifsn[]={3,7,2,2};
-
-UCHAR MapUserPriorityToAccessCategory[8] = {QID_AC_BE, QID_AC_BK, QID_AC_BK, QID_AC_BE, QID_AC_VI, QID_AC_VI, QID_AC_VO, QID_AC_VO};
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		API for MLME to transmit management frame to AP (BSS Mode)
-	or station (IBSS Mode)
-
-	Arguments:
-		pAd Pointer to our adapter
-		pData		Pointer to the outgoing 802.11 frame
-		Length		Size of outgoing management frame
-
-	Return Value:
-		NDIS_STATUS_FAILURE
-		NDIS_STATUS_PENDING
-		NDIS_STATUS_SUCCESS
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-NDIS_STATUS MiniportMMRequest(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			QueIdx,
-	IN	PUCHAR			pData,
-	IN	UINT			Length)
-{
-	PNDIS_PACKET	pPacket;
-	NDIS_STATUS  	Status = NDIS_STATUS_SUCCESS;
-	ULONG	 		FreeNum;
-	UCHAR			IrqState;
-	UCHAR			rtmpHwHdr[TXINFO_SIZE + TXWI_SIZE]; //RTMP_HW_HDR_LEN];
-
-	ASSERT(Length <= MGMT_DMA_BUFFER_SIZE);
-
-	QueIdx=3;
-
-	// 2860C use Tx Ring
-
-	IrqState = pAd->irq_disabled;
-
-	do
-	{
-		// Reset is in progress, stop immediately
-		if ( RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS) ||
-			 RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)||
-			 !RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP))
-		{
-			Status = NDIS_STATUS_FAILURE;
-			break;
-		}
-
-		// Check Free priority queue
-		// Since we use PBF Queue2 for management frame.  Its corresponding DMA ring should be using TxRing.
-
-		// 2860C use Tx Ring
-		if (pAd->MACVersion == 0x28600100)
-		{
-			FreeNum = GET_TXRING_FREENO(pAd, QueIdx);
-		}
-		else
-		{
-			FreeNum = GET_MGMTRING_FREENO(pAd);
-		}
-
-		if ((FreeNum > 0))
-		{
-			// We need to reserve space for rtmp hardware header. i.e., TxWI for RT2860 and TxInfo+TxWI for RT2870
-			NdisZeroMemory(&rtmpHwHdr, (TXINFO_SIZE + TXWI_SIZE));
-			Status = RTMPAllocateNdisPacket(pAd, &pPacket, (PUCHAR)&rtmpHwHdr, (TXINFO_SIZE + TXWI_SIZE), pData, Length);
-			if (Status != NDIS_STATUS_SUCCESS)
-			{
-				DBGPRINT(RT_DEBUG_WARN, ("MiniportMMRequest (error:: can't allocate NDIS PACKET)\n"));
-				break;
-			}
-
-			//pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK;
-			//pAd->CommonCfg.MlmeRate = RATE_2;
-
-
-			Status = MlmeHardTransmit(pAd, QueIdx, pPacket);
-			if (Status != NDIS_STATUS_SUCCESS)
-				RTMPFreeNdisPacket(pAd, pPacket);
-		}
-		else
-		{
-			pAd->RalinkCounters.MgmtRingFullCount++;
-			DBGPRINT(RT_DEBUG_ERROR, ("Qidx(%d), not enough space in MgmtRing, MgmtRingFullCount=%ld!\n",
-										QueIdx, pAd->RalinkCounters.MgmtRingFullCount));
-		}
-
-	} while (FALSE);
-
-
-	return Status;
-}
-
-
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Copy frame from waiting queue into relative ring buffer and set
-	appropriate ASIC register to kick hardware transmit function
-
-	Arguments:
-		pAd Pointer to our adapter
-		pBuffer 	Pointer to	memory of outgoing frame
-		Length		Size of outgoing management frame
-
-	Return Value:
-		NDIS_STATUS_FAILURE
-		NDIS_STATUS_PENDING
-		NDIS_STATUS_SUCCESS
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-NDIS_STATUS MlmeHardTransmit(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			QueIdx,
-	IN	PNDIS_PACKET	pPacket)
-{
-	if ((pAd->CommonCfg.RadarDetect.RDMode != RD_NORMAL_MODE)
-#ifdef CARRIER_DETECTION_SUPPORT
-#endif // CARRIER_DETECTION_SUPPORT //
-		)
-	{
-		return NDIS_STATUS_FAILURE;
-	}
-
-		return MlmeHardTransmitMgmtRing(pAd,QueIdx,pPacket);
-
-}
-
-
-
-NDIS_STATUS MlmeHardTransmitMgmtRing(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR	QueIdx,
-	IN	PNDIS_PACKET	pPacket)
-{
-	PACKET_INFO 	PacketInfo;
-	PUCHAR			pSrcBufVA;
-	UINT			SrcBufLen;
-	PHEADER_802_11	pHeader_802_11;
-	BOOLEAN 		bAckRequired, bInsertTimestamp;
-	UCHAR			MlmeRate;
-	PTXWI_STRUC 	pFirstTxWI;
-	MAC_TABLE_ENTRY	*pMacEntry = NULL;
-
-	RTMP_QueryPacketInfo(pPacket, &PacketInfo, &pSrcBufVA, &SrcBufLen);
-
-	// Make sure MGMT ring resource won't be used by other threads
-// sample, for IRQ LOCK -> SEM LOCK
-//	IrqState = pAd->irq_disabled;
-//	if (!IrqState)
-		RTMP_SEM_LOCK(&pAd->MgmtRingLock);
-
-
-	if (pSrcBufVA == NULL)
-	{
-		// The buffer shouldn't be NULL
-//		if (!IrqState)
-			RTMP_SEM_UNLOCK(&pAd->MgmtRingLock);
-		return NDIS_STATUS_FAILURE;
-	}
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// outgoing frame always wakeup PHY to prevent frame lost
-		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
-			AsicForceWakeup(pAd, TRUE);
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	pFirstTxWI = (PTXWI_STRUC)(pSrcBufVA +  TXINFO_SIZE);
-	pHeader_802_11 = (PHEADER_802_11) (pSrcBufVA + TXINFO_SIZE + TXWI_SIZE); //TXWI_SIZE);
-
-	if (pHeader_802_11->Addr1[0] & 0x01)
-	{
-		MlmeRate = pAd->CommonCfg.BasicMlmeRate;
-	}
-	else
-	{
-		MlmeRate = pAd->CommonCfg.MlmeRate;
-	}
-
-	// Verify Mlme rate for a / g bands.
-	if ((pAd->LatchRfRegs.Channel > 14) && (MlmeRate < RATE_6)) // 11A band
-		MlmeRate = RATE_6;
-
-	if ((pHeader_802_11->FC.Type == BTYPE_DATA) &&
-		(pHeader_802_11->FC.SubType == SUBTYPE_QOS_NULL))
-	{
-		pMacEntry = MacTableLookup(pAd, pHeader_802_11->Addr1);
-	}
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// Fixed W52 with Activity scan issue in ABG_MIXED and ABGN_MIXED mode.
-		if (pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED
-#ifdef DOT11_N_SUPPORT
-			|| pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED
-#endif // DOT11_N_SUPPORT //
-		)
-		{
-			if (pAd->LatchRfRegs.Channel > 14)
-				pAd->CommonCfg.MlmeTransmit.field.MODE = 1;
-			else
-				pAd->CommonCfg.MlmeTransmit.field.MODE = 0;
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	//
-	// Should not be hard code to set PwrMgmt to 0 (PWR_ACTIVE)
-	// Snice it's been set to 0 while on MgtMacHeaderInit
-	// By the way this will cause frame to be send on PWR_SAVE failed.
-	//
-	// pHeader_802_11->FC.PwrMgmt = 0; // (pAd->StaCfg.Psm == PWR_SAVE);
-	//
-	// In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame
-#ifdef CONFIG_STA_SUPPORT
-    // Data-Null packets alse pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD
-	if ((pHeader_802_11->FC.Type != BTYPE_DATA) && (pHeader_802_11->FC.Type != BTYPE_CNTL))
-	{
-		if ((pAd->StaCfg.Psm == PWR_SAVE) &&
-			(pHeader_802_11->FC.SubType == SUBTYPE_ACTION))
-			pHeader_802_11->FC.PwrMgmt = PWR_SAVE;
-		else
-			pHeader_802_11->FC.PwrMgmt = PWR_ACTIVE;
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	bInsertTimestamp = FALSE;
-	if (pHeader_802_11->FC.Type == BTYPE_CNTL) // must be PS-POLL
-	{
-#ifdef CONFIG_STA_SUPPORT
-		//Set PM bit in ps-poll, to fix WLK 1.2  PowerSaveMode_ext failure issue.
-		if ((pAd->OpMode == OPMODE_STA) && (pHeader_802_11->FC.SubType == SUBTYPE_PS_POLL))
-		{
-			pHeader_802_11->FC.PwrMgmt = PWR_SAVE;
-		}
-#endif // CONFIG_STA_SUPPORT //
-		bAckRequired = FALSE;
-	}
-	else // BTYPE_MGMT or BTYPE_DATA(must be NULL frame)
-	{
-		//pAd->Sequence++;
-		//pHeader_802_11->Sequence = pAd->Sequence;
-
-		if (pHeader_802_11->Addr1[0] & 0x01) // MULTICAST, BROADCAST
-		{
-			bAckRequired = FALSE;
-			pHeader_802_11->Duration = 0;
-		}
-		else
-		{
-			bAckRequired = TRUE;
-			pHeader_802_11->Duration = RTMPCalcDuration(pAd, MlmeRate, 14);
-			if (pHeader_802_11->FC.SubType == SUBTYPE_PROBE_RSP)
-			{
-				bInsertTimestamp = TRUE;
-			}
-		}
-	}
-
-	pHeader_802_11->Sequence = pAd->Sequence++;
-	if (pAd->Sequence >0xfff)
-		pAd->Sequence = 0;
-
-	// Before radar detection done, mgmt frame can not be sent but probe req
-	// Because we need to use probe req to trigger driver to send probe req in passive scan
-	if ((pHeader_802_11->FC.SubType != SUBTYPE_PROBE_REQ)
-		&& (pAd->CommonCfg.bIEEE80211H == 1)
-		&& (pAd->CommonCfg.RadarDetect.RDMode != RD_NORMAL_MODE))
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("MlmeHardTransmit --> radar detect not in normal mode !!!\n"));
-//		if (!IrqState)
-			RTMP_SEM_UNLOCK(&pAd->MgmtRingLock);
-		return (NDIS_STATUS_FAILURE);
-	}
-
-#ifdef RT_BIG_ENDIAN
-	RTMPFrameEndianChange(pAd, (PUCHAR)pHeader_802_11, DIR_WRITE, FALSE);
-#endif
-
-	//
-	// fill scatter-and-gather buffer list into TXD. Internally created NDIS PACKET
-	// should always has only one ohysical buffer, and the whole frame size equals
-	// to the first scatter buffer size
-	//
-
-	// Initialize TX Descriptor
-	// For inter-frame gap, the number is for this frame and next frame
-	// For MLME rate, we will fix as 2Mb to match other vendor's implement
-//	pAd->CommonCfg.MlmeTransmit.field.MODE = 1;
-
-// management frame doesn't need encryption. so use RESERVED_WCID no matter u are sending to specific wcid or not.
-	if (pMacEntry == NULL)
-	{
-		RTMPWriteTxWI(pAd, pFirstTxWI, FALSE, FALSE, bInsertTimestamp, FALSE, bAckRequired, FALSE,
-		0, RESERVED_WCID, (SrcBufLen - TXINFO_SIZE - TXWI_SIZE), PID_MGMT, 0,  (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_BACKOFF, FALSE, &pAd->CommonCfg.MlmeTransmit);
-	}
-	else
-	{
-		RTMPWriteTxWI(pAd, pFirstTxWI, FALSE, FALSE,
-					bInsertTimestamp, FALSE, bAckRequired, FALSE,
-					0, pMacEntry->Aid, (SrcBufLen - TXINFO_SIZE - TXWI_SIZE),
-					pMacEntry->MaxHTPhyMode.field.MCS, 0,
-					(UCHAR)pMacEntry->MaxHTPhyMode.field.MCS,
-					IFS_BACKOFF, FALSE, &pMacEntry->MaxHTPhyMode);
-	}
-
-#ifdef RT_BIG_ENDIAN
-	RTMPWIEndianChange((PUCHAR)pFirstTxWI, TYPE_TXWI);
-#endif
-
-	// Now do hardware-depened kick out.
-	HAL_KickOutMgmtTx(pAd, QueIdx, pPacket, pSrcBufVA, SrcBufLen);
-
-	// Make sure to release MGMT ring resource
-//	if (!IrqState)
-		RTMP_SEM_UNLOCK(&pAd->MgmtRingLock);
-	return NDIS_STATUS_SUCCESS;
-}
-
-
-/********************************************************************************
-
-	New DeQueue Procedures.
-
- ********************************************************************************/
-
-#define DEQUEUE_LOCK(lock, bIntContext, IrqFlags) 				\
-			do{													\
-				if (bIntContext == FALSE)						\
-				RTMP_IRQ_LOCK((lock), IrqFlags);		\
-			}while(0)
-
-#define DEQUEUE_UNLOCK(lock, bIntContext, IrqFlags)				\
-			do{													\
-				if (bIntContext == FALSE)						\
-					RTMP_IRQ_UNLOCK((lock), IrqFlags);	\
-			}while(0)
-
-
-#if 0
-static VOID dumpTxBlk(TX_BLK *pTxBlk)
-{
-	NDIS_PACKET *pPacket;
-	int i, frameNum;
-	PQUEUE_ENTRY	pQEntry;
-
-	printk("Dump TX_BLK Structure:\n");
-	printk("\tTxFrameType=%d!\n", pTxBlk->TxFrameType);
-	printk("\tTotalFrameLen=%d\n", pTxBlk->TotalFrameLen);
-	printk("\tTotalFrameNum=%ld!\n", pTxBlk->TxPacketList.Number);
-	printk("\tTotalFragNum=%d!\n", pTxBlk->TotalFragNum);
-	printk("\tpPacketList=\n");
-
-	frameNum = pTxBlk->TxPacketList.Number;
-
-	for(i=0; i < frameNum; i++)
-	{	int j;
-		UCHAR	*pBuf;
-
-		pQEntry = RemoveHeadQueue(&pTxBlk->TxPacketList);
-		pPacket = QUEUE_ENTRY_TO_PACKET(pQEntry);
-		if (pPacket)
-		{
-			pBuf = GET_OS_PKT_DATAPTR(pPacket);
-			printk("\t\t[%d]:ptr=0x%x, Len=%d!\n", i, (UINT32)(GET_OS_PKT_DATAPTR(pPacket)), GET_OS_PKT_LEN(pPacket));
-			printk("\t\t");
-			for (j =0 ; j < GET_OS_PKT_LEN(pPacket); j++)
-			{
-				printk("%02x ", (pBuf[j] & 0xff));
-				if (j == 16)
-					break;
-			}
-			InsertTailQueue(&pTxBlk->TxPacketList, PACKET_TO_QUEUE_ENTRY(pPacket));
-		}
-	}
-	printk("\tWcid=%d!\n", pTxBlk->Wcid);
-	printk("\tapidx=%d!\n", pTxBlk->apidx);
-	printk("----EndOfDump\n");
-
-}
-#endif
-
-
-/*
-	========================================================================
-	Tx Path design algorithm:
-		Basically, we divide the packets into four types, Broadcast/Multicast, 11N Rate(AMPDU, AMSDU, Normal), B/G Rate(ARALINK, Normal),
-		Specific Packet Type. Following show the classification rule and policy for each kinds of packets.
-				Classification Rule=>
-					Multicast: (*addr1 & 0x01) == 0x01
-					Specific : bDHCPFrame, bARPFrame, bEAPOLFrame, etc.
-					11N Rate : If peer support HT
-								(1).AMPDU  -- If TXBA is negotiated.
-								(2).AMSDU  -- If AMSDU is capable for both peer and ourself.
-											*). AMSDU can embedded in a AMPDU, but now we didn't support it.
-								(3).Normal -- Other packets which send as 11n rate.
-
-					B/G Rate : If peer is b/g only.
-								(1).ARALINK-- If both of peer/us supprot Ralink proprietary Aggregation and the TxRate is large than RATE_6
-								(2).Normal -- Other packets which send as b/g rate.
-					Fragment:
-								The packet must be unicast, NOT A-RALINK, NOT A-MSDU, NOT 11n, then can consider about fragment.
-
-				Classified Packet Handle Rule=>
-					Multicast:
-								No ACK, 		//pTxBlk->bAckRequired = FALSE;
-								No WMM, 		//pTxBlk->bWMM = FALSE;
-								No piggyback,   //pTxBlk->bPiggyBack = FALSE;
-								Force LowRate,  //pTxBlk->bForceLowRate = TRUE;
-					Specific :	Basically, for specific packet, we should handle it specifically, but now all specific packets are use
-									the same policy to handle it.
-								Force LowRate,  //pTxBlk->bForceLowRate = TRUE;
-
-					11N Rate :
-								No piggyback,	//pTxBlk->bPiggyBack = FALSE;
-
-								(1).AMSDU
-									pTxBlk->bWMM = TRUE;
-								(2).AMPDU
-									pTxBlk->bWMM = TRUE;
-								(3).Normal
-
-					B/G Rate :
-								(1).ARALINK
-
-								(2).Normal
-	========================================================================
-*/
-static UCHAR TxPktClassification(
-	IN RTMP_ADAPTER *pAd,
-	IN PNDIS_PACKET  pPacket)
-{
-	UCHAR			TxFrameType = TX_UNKOWN_FRAME;
-	UCHAR			Wcid;
-	MAC_TABLE_ENTRY	*pMacEntry = NULL;
-#ifdef DOT11_N_SUPPORT
-	BOOLEAN			bHTRate = FALSE;
-#endif // DOT11_N_SUPPORT //
-
-	Wcid = RTMP_GET_PACKET_WCID(pPacket);
-	if (Wcid == MCAST_WCID)
-	{	// Handle for RA is Broadcast/Multicast Address.
-		return TX_MCAST_FRAME;
-	}
-
-	// Handle for unicast packets
-	pMacEntry = &pAd->MacTab.Content[Wcid];
-	if (RTMP_GET_PACKET_LOWRATE(pPacket))
-	{	// It's a specific packet need to force low rate, i.e., bDHCPFrame, bEAPOLFrame, bWAIFrame
-		TxFrameType = TX_LEGACY_FRAME;
-	}
-#ifdef DOT11_N_SUPPORT
-	else if (IS_HT_RATE(pMacEntry))
-	{	// it's a 11n capable packet
-
-		// Depends on HTPhyMode to check if the peer support the HTRate transmission.
-		// 	Currently didn't support A-MSDU embedded in A-MPDU
-		bHTRate = TRUE;
-		if (RTMP_GET_PACKET_MOREDATA(pPacket) || (pMacEntry->PsMode == PWR_SAVE))
-			TxFrameType = TX_LEGACY_FRAME;
-#ifdef UAPSD_AP_SUPPORT
-		else if (RTMP_GET_PACKET_EOSP(pPacket))
-			TxFrameType = TX_LEGACY_FRAME;
-#endif // UAPSD_AP_SUPPORT //
-		else if((pMacEntry->TXBAbitmap & (1<<(RTMP_GET_PACKET_UP(pPacket)))) != 0)
-			return TX_AMPDU_FRAME;
-		else if(CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_AMSDU_INUSED))
-			return TX_AMSDU_FRAME;
-		else
-			TxFrameType = TX_LEGACY_FRAME;
-	}
-#endif // DOT11_N_SUPPORT //
-	else
-	{	// it's a legacy b/g packet.
-		if ((CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_AGGREGATION_CAPABLE) && pAd->CommonCfg.bAggregationCapable) &&
-			(RTMP_GET_PACKET_TXRATE(pPacket) >= RATE_6) &&
-			(!(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) && CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_WMM_CAPABLE))))
-		{	// if peer support Ralink Aggregation, we use it.
-			TxFrameType = TX_RALINK_FRAME;
-		}
-		else
-		{
-			TxFrameType = TX_LEGACY_FRAME;
-		}
-	}
-
-	// Currently, our fragment only support when a unicast packet send as NOT-ARALINK, NOT-AMSDU and NOT-AMPDU.
-	if ((RTMP_GET_PACKET_FRAGMENTS(pPacket) > 1) && (TxFrameType == TX_LEGACY_FRAME))
-		TxFrameType = TX_FRAG_FRAME;
-
-	return TxFrameType;
-}
-
-
-BOOLEAN RTMP_FillTxBlkInfo(
-	IN RTMP_ADAPTER *pAd,
-	IN TX_BLK *pTxBlk)
-{
-	PACKET_INFO			PacketInfo;
-	PNDIS_PACKET		pPacket;
-	PMAC_TABLE_ENTRY	pMacEntry = NULL;
-
-	pPacket = pTxBlk->pPacket;
-	RTMP_QueryPacketInfo(pPacket, &PacketInfo, &pTxBlk->pSrcBufHeader, &pTxBlk->SrcBufLen);
-
-	pTxBlk->Wcid	 	 		= RTMP_GET_PACKET_WCID(pPacket);
-	pTxBlk->apidx		 		= RTMP_GET_PACKET_IF(pPacket);
-	pTxBlk->UserPriority 		= RTMP_GET_PACKET_UP(pPacket);
-	pTxBlk->FrameGap = IFS_HTTXOP;		// ASIC determine Frame Gap
-
-	if (RTMP_GET_PACKET_CLEAR_EAP_FRAME(pTxBlk->pPacket))
-		TX_BLK_SET_FLAG(pTxBlk, fTX_bClearEAPFrame);
-	else
-		TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bClearEAPFrame);
-
-	// Default to clear this flag
-	TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bForceNonQoS);
-
-
-	if (pTxBlk->Wcid == MCAST_WCID)
-	{
-		pTxBlk->pMacEntry = NULL;
-		{
-#ifdef MCAST_RATE_SPECIFIC
-			PUCHAR pDA = GET_OS_PKT_DATAPTR(pPacket);
-			if (((*pDA & 0x01) == 0x01) && (*pDA != 0xff))
-				pTxBlk->pTransmit = &pAd->CommonCfg.MCastPhyMode;
-			else
-#endif // MCAST_RATE_SPECIFIC //
-				pTxBlk->pTransmit = &pAd->MacTab.Content[MCAST_WCID].HTPhyMode;
-		}
-
-		TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bAckRequired);	// AckRequired = FALSE, when broadcast packet in Adhoc mode.
-		//TX_BLK_SET_FLAG(pTxBlk, fTX_bForceLowRate);
-		TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bAllowFrag);
-		TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bWMM);
-		if (RTMP_GET_PACKET_MOREDATA(pPacket))
-		{
-			TX_BLK_SET_FLAG(pTxBlk, fTX_bMoreData);
-		}
-
-	}
-	else
-	{
-		pTxBlk->pMacEntry = &pAd->MacTab.Content[pTxBlk->Wcid];
-		pTxBlk->pTransmit = &pTxBlk->pMacEntry->HTPhyMode;
-
-		pMacEntry = pTxBlk->pMacEntry;
-
-
-		// For all unicast packets, need Ack unless the Ack Policy is not set as NORMAL_ACK.
-		if (pAd->CommonCfg.AckPolicy[pTxBlk->QueIdx] != NORMAL_ACK)
-			TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bAckRequired);
-		else
-			TX_BLK_SET_FLAG(pTxBlk, fTX_bAckRequired);
-
-		{
-
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			{
-
-				// If support WMM, enable it.
-				if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) &&
-					CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_WMM_CAPABLE))
-					TX_BLK_SET_FLAG(pTxBlk, fTX_bWMM);
-			}
-#endif // CONFIG_STA_SUPPORT //
-		}
-
-		if (pTxBlk->TxFrameType == TX_LEGACY_FRAME)
-		{
-			if ( (RTMP_GET_PACKET_LOWRATE(pPacket)) ||
-                ((pAd->OpMode == OPMODE_AP) && (pMacEntry->MaxHTPhyMode.field.MODE == MODE_CCK) && (pMacEntry->MaxHTPhyMode.field.MCS == RATE_1)))
-			{	// Specific packet, i.e., bDHCPFrame, bEAPOLFrame, bWAIFrame, need force low rate.
-				pTxBlk->pTransmit = &pAd->MacTab.Content[MCAST_WCID].HTPhyMode;
-#ifdef DOT11_N_SUPPORT
-				// Modify the WMM bit for ICV issue. If we have a packet with EOSP field need to set as 1, how to handle it???
-				if (IS_HT_STA(pTxBlk->pMacEntry) &&
-					(CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_RALINK_CHIPSET)) &&
-					((pAd->CommonCfg.bRdg == TRUE) && CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_RDG_CAPABLE)))
-				{
-					TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bWMM);
-					TX_BLK_SET_FLAG(pTxBlk, fTX_bForceNonQoS);
-				}
-#endif // DOT11_N_SUPPORT //
-			}
-
-#ifdef DOT11_N_SUPPORT
-			if ( (IS_HT_RATE(pMacEntry) == FALSE) &&
-				(CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_PIGGYBACK_CAPABLE)))
-			{	// Currently piggy-back only support when peer is operate in b/g mode.
-				TX_BLK_SET_FLAG(pTxBlk, fTX_bPiggyBack);
-			}
-#endif // DOT11_N_SUPPORT //
-
-			if (RTMP_GET_PACKET_MOREDATA(pPacket))
-			{
-				TX_BLK_SET_FLAG(pTxBlk, fTX_bMoreData);
-			}
-#ifdef UAPSD_AP_SUPPORT
-			if (RTMP_GET_PACKET_EOSP(pPacket))
-			{
-				TX_BLK_SET_FLAG(pTxBlk, fTX_bWMM_UAPSD_EOSP);
-			}
-#endif // UAPSD_AP_SUPPORT //
-		}
-		else if (pTxBlk->TxFrameType == TX_FRAG_FRAME)
-		{
-			TX_BLK_SET_FLAG(pTxBlk, fTX_bAllowFrag);
-		}
-
-		pMacEntry->DebugTxCount++;
-	}
-
-	return TRUE;
-}
-
-
-BOOLEAN CanDoAggregateTransmit(
-	IN RTMP_ADAPTER *pAd,
-	IN NDIS_PACKET *pPacket,
-	IN TX_BLK		*pTxBlk)
-{
-
-	//printk("Check if can do aggregation! TxFrameType=%d!\n", pTxBlk->TxFrameType);
-
-	if (RTMP_GET_PACKET_WCID(pPacket) == MCAST_WCID)
-		return FALSE;
-
-	if (RTMP_GET_PACKET_DHCP(pPacket) ||
-		RTMP_GET_PACKET_EAPOL(pPacket) ||
-		RTMP_GET_PACKET_WAI(pPacket))
-		return FALSE;
-
-	if ((pTxBlk->TxFrameType == TX_AMSDU_FRAME) &&
-		((pTxBlk->TotalFrameLen + GET_OS_PKT_LEN(pPacket))> (RX_BUFFER_AGGRESIZE - 100)))
-	{	// For AMSDU, allow the packets with total length < max-amsdu size
-		return FALSE;
-	}
-
-	if ((pTxBlk->TxFrameType == TX_RALINK_FRAME) &&
-		(pTxBlk->TxPacketList.Number == 2))
-	{	// For RALINK-Aggregation, allow two frames in one batch.
-		return FALSE;
-	}
-
-#ifdef CONFIG_STA_SUPPORT
-	if ((INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA)) // must be unicast to AP
-		return TRUE;
-	else
-#endif // CONFIG_STA_SUPPORT //
-		return FALSE;
-
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		To do the enqueue operation and extract the first item of waiting
-		list. If a number of available shared memory segments could meet
-		the request of extracted item, the extracted item will be fragmented
-		into shared memory segments.
-
-	Arguments:
-		pAd Pointer to our adapter
-		pQueue		Pointer to Waiting Queue
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID RTMPDeQueuePacket(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  BOOLEAN         bIntContext,
-	IN  UCHAR			QIdx, /* BulkOutPipeId */
-	IN  UCHAR           Max_Tx_Packets)
-{
-	PQUEUE_ENTRY    pEntry = NULL;
-	PNDIS_PACKET 	pPacket;
-	NDIS_STATUS     Status = NDIS_STATUS_SUCCESS;
-	UCHAR           Count=0;
-	PQUEUE_HEADER   pQueue;
-	ULONG           FreeNumber[NUM_OF_TX_RING];
-	UCHAR			QueIdx, sQIdx, eQIdx;
-	unsigned long	IrqFlags = 0;
-	BOOLEAN			hasTxDesc = FALSE;
-	TX_BLK			TxBlk;
-	TX_BLK			*pTxBlk;
-
-#ifdef DBG_DIAGNOSE
-	BOOLEAN			firstRound;
-	RtmpDiagStruct	*pDiagStruct = &pAd->DiagStruct;
-#endif
-
-
-	if (QIdx == NUM_OF_TX_RING)
-	{
-		sQIdx = 0;
-		eQIdx = 3;	// 4 ACs, start from 0.
-	}
-	else
-	{
-		sQIdx = eQIdx = QIdx;
-	}
-
-	for (QueIdx=sQIdx; QueIdx <= eQIdx; QueIdx++)
-	{
-		Count=0;
-
-		RT28XX_START_DEQUEUE(pAd, QueIdx, IrqFlags);
-
-#ifdef DBG_DIAGNOSE
-		firstRound = ((QueIdx == 0) ? TRUE : FALSE);
-#endif // DBG_DIAGNOSE //
-
-		while (1)
-		{
-			if ((RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS |
-										fRTMP_ADAPTER_RADIO_OFF |
-										fRTMP_ADAPTER_RESET_IN_PROGRESS |
-										fRTMP_ADAPTER_HALT_IN_PROGRESS |
-										fRTMP_ADAPTER_NIC_NOT_EXIST))))
-			{
-				RT28XX_STOP_DEQUEUE(pAd, QueIdx, IrqFlags);
-				return;
-			}
-
-			if (Count >= Max_Tx_Packets)
-				break;
-
-			DEQUEUE_LOCK(&pAd->irq_lock, bIntContext, IrqFlags);
-			if (&pAd->TxSwQueue[QueIdx] == NULL)
-			{
-#ifdef DBG_DIAGNOSE
-				if (firstRound == TRUE)
-					pDiagStruct->TxSWQueCnt[pDiagStruct->ArrayCurIdx][0]++;
-#endif // DBG_DIAGNOSE //
-				DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
-				break;
-			}
-
-
-			// probe the Queue Head
-			pQueue = &pAd->TxSwQueue[QueIdx];
-			if ((pEntry = pQueue->Head) == NULL)
-			{
-				DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
-				break;
-			}
-
-			pTxBlk = &TxBlk;
-			NdisZeroMemory((PUCHAR)pTxBlk, sizeof(TX_BLK));
-			//InitializeQueueHeader(&pTxBlk->TxPacketList);		// Didn't need it because we already memzero it.
-			pTxBlk->QueIdx = QueIdx;
-
-			pPacket = QUEUE_ENTRY_TO_PKT(pEntry);
-
-			// Early check to make sure we have enoguh Tx Resource.
-			hasTxDesc = RT28XX_HAS_ENOUGH_FREE_DESC(pAd, pTxBlk, FreeNumber[QueIdx], pPacket);
-			if (!hasTxDesc)
-			{
-				pAd->PrivateInfo.TxRingFullCnt++;
-
-				DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
-
-				break;
-			}
-
-			pTxBlk->TxFrameType = TxPktClassification(pAd, pPacket);
-			pEntry = RemoveHeadQueue(pQueue);
-			pTxBlk->TotalFrameNum++;
-			pTxBlk->TotalFragNum += RTMP_GET_PACKET_FRAGMENTS(pPacket);	// The real fragment number maybe vary
-			pTxBlk->TotalFrameLen += GET_OS_PKT_LEN(pPacket);
-			pTxBlk->pPacket = pPacket;
-			InsertTailQueue(&pTxBlk->TxPacketList, PACKET_TO_QUEUE_ENTRY(pPacket));
-
-			if (pTxBlk->TxFrameType == TX_RALINK_FRAME || pTxBlk->TxFrameType == TX_AMSDU_FRAME)
-			{
-				// Enhance SW Aggregation Mechanism
-				if (NEED_QUEUE_BACK_FOR_AGG(pAd, QueIdx, FreeNumber[QueIdx], pTxBlk->TxFrameType))
-				{
-					InsertHeadQueue(pQueue, PACKET_TO_QUEUE_ENTRY(pPacket));
-					DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
-					break;
-				}
-
-				do{
-					if((pEntry = pQueue->Head) == NULL)
-						break;
-
-					// For TX_AMSDU_FRAME/TX_RALINK_FRAME, Need to check if next pakcet can do aggregation.
-					pPacket = QUEUE_ENTRY_TO_PKT(pEntry);
-					FreeNumber[QueIdx] = GET_TXRING_FREENO(pAd, QueIdx);
-					hasTxDesc = RT28XX_HAS_ENOUGH_FREE_DESC(pAd, pTxBlk, FreeNumber[QueIdx], pPacket);
-					if ((hasTxDesc == FALSE) || (CanDoAggregateTransmit(pAd, pPacket, pTxBlk) == FALSE))
-						break;
-
-					//Remove the packet from the TxSwQueue and insert into pTxBlk
-					pEntry = RemoveHeadQueue(pQueue);
-					ASSERT(pEntry);
-					pPacket = QUEUE_ENTRY_TO_PKT(pEntry);
-					pTxBlk->TotalFrameNum++;
-					pTxBlk->TotalFragNum += RTMP_GET_PACKET_FRAGMENTS(pPacket);	// The real fragment number maybe vary
-					pTxBlk->TotalFrameLen += GET_OS_PKT_LEN(pPacket);
-					InsertTailQueue(&pTxBlk->TxPacketList, PACKET_TO_QUEUE_ENTRY(pPacket));
-				}while(1);
-
-				if (pTxBlk->TxPacketList.Number == 1)
-					pTxBlk->TxFrameType = TX_LEGACY_FRAME;
-			}
-
-#ifdef RT2870
-			DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
-#endif // RT2870 //
-
-			Count += pTxBlk->TxPacketList.Number;
-
-				// Do HardTransmit now.
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				Status = STAHardTransmit(pAd, pTxBlk, QueIdx);
-#endif // CONFIG_STA_SUPPORT //
-
-
-#if 0	// We should not break if HardTransmit failed. Well, at least now we should not!
-			if (Status != NDIS_STATUS_SUCCESS)
-			{
-				DBGPRINT(RT_DEBUG_TRACE /*RT_DEBUG_INFO*/,("RTMPHardTransmit return failed!!!\n"));
-				break;
-			}
-#endif
-		}
-
-		RT28XX_STOP_DEQUEUE(pAd, QueIdx, IrqFlags);
-
-#ifdef RT2870
-		if (!hasTxDesc)
-			RTUSBKickBulkOut(pAd);
-#endif // RT2870 //
-
-#ifdef BLOCK_NET_IF
-		if ((pAd->blockQueueTab[QueIdx].SwTxQueueBlockFlag == TRUE)
-			&& (pAd->TxSwQueue[QueIdx].Number < 1))
-		{
-			releaseNetIf(&pAd->blockQueueTab[QueIdx]);
-		}
-#endif // BLOCK_NET_IF //
-
-	}
-
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Calculates the duration which is required to transmit out frames
-	with given size and specified rate.
-
-	Arguments:
-		pAd 	Pointer to our adapter
-		Rate			Transmit rate
-		Size			Frame size in units of byte
-
-	Return Value:
-		Duration number in units of usec
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-USHORT	RTMPCalcDuration(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			Rate,
-	IN	ULONG			Size)
-{
-	ULONG	Duration = 0;
-
-	if (Rate < RATE_FIRST_OFDM_RATE) // CCK
-	{
-		if ((Rate > RATE_1) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED))
-			Duration = 96;	// 72+24 preamble+plcp
-		else
-			Duration = 192; // 144+48 preamble+plcp
-
-		Duration += (USHORT)((Size << 4) / RateIdTo500Kbps[Rate]);
-		if ((Size << 4) % RateIdTo500Kbps[Rate])
-			Duration ++;
-	}
-	else if (Rate <= RATE_LAST_OFDM_RATE)// OFDM rates
-	{
-		Duration = 20 + 6;		// 16+4 preamble+plcp + Signal Extension
-		Duration += 4 * (USHORT)((11 + Size * 4) / RateIdTo500Kbps[Rate]);
-		if ((11 + Size * 4) % RateIdTo500Kbps[Rate])
-			Duration += 4;
-	}
-	else	//mimo rate
-	{
-		Duration = 20 + 6;		// 16+4 preamble+plcp + Signal Extension
-	}
-
-	return (USHORT)Duration;
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Calculates the duration which is required to transmit out frames
-	with given size and specified rate.
-
-	Arguments:
-		pTxWI		Pointer to head of each MPDU to HW.
-		Ack 		Setting for Ack requirement bit
-		Fragment	Setting for Fragment bit
-		RetryMode	Setting for retry mode
-		Ifs 		Setting for IFS gap
-		Rate		Setting for transmit rate
-		Service 	Setting for service
-		Length		Frame length
-		TxPreamble	Short or Long preamble when using CCK rates
-		QueIdx - 0-3, according to 802.11e/d4.4 June/2003
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-    See also : BASmartHardTransmit()    !!!
-
-	========================================================================
-*/
-VOID RTMPWriteTxWI(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PTXWI_STRUC 	pOutTxWI,
-	IN	BOOLEAN			FRAG,
-	IN	BOOLEAN			CFACK,
-	IN	BOOLEAN			InsTimestamp,
-	IN	BOOLEAN 		AMPDU,
-	IN	BOOLEAN 		Ack,
-	IN	BOOLEAN 		NSeq,		// HW new a sequence.
-	IN	UCHAR			BASize,
-	IN	UCHAR			WCID,
-	IN	ULONG			Length,
-	IN	UCHAR 			PID,
-	IN	UCHAR			TID,
-	IN	UCHAR			TxRate,
-	IN	UCHAR			Txopmode,
-	IN	BOOLEAN			CfAck,
-	IN	HTTRANSMIT_SETTING	*pTransmit)
-{
-	PMAC_TABLE_ENTRY	pMac = NULL;
-	TXWI_STRUC 		TxWI;
-	PTXWI_STRUC 	pTxWI;
-
-	if (WCID < MAX_LEN_OF_MAC_TABLE)
-		pMac = &pAd->MacTab.Content[WCID];
-
-	//
-	// Always use Long preamble before verifiation short preamble functionality works well.
-	// Todo: remove the following line if short preamble functionality works
-	//
-	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
-	NdisZeroMemory(&TxWI, TXWI_SIZE);
-	pTxWI = &TxWI;
-
-	pTxWI->FRAG= FRAG;
-
-	pTxWI->CFACK = CFACK;
-	pTxWI->TS= InsTimestamp;
-	pTxWI->AMPDU = AMPDU;
-	pTxWI->ACK = Ack;
-	pTxWI->txop= Txopmode;
-
-	pTxWI->NSEQ = NSeq;
-	// John tune the performace with Intel Client in 20 MHz performance
-#ifdef DOT11_N_SUPPORT
-	BASize = pAd->CommonCfg.TxBASize;
-
-	if( BASize >7 )
-		BASize =7;
-	pTxWI->BAWinSize = BASize;
-	pTxWI->ShortGI = pTransmit->field.ShortGI;
-	pTxWI->STBC = pTransmit->field.STBC;
-#endif // DOT11_N_SUPPORT //
-
-	pTxWI->WirelessCliID = WCID;
-	pTxWI->MPDUtotalByteCount = Length;
-	pTxWI->PacketId = PID;
-
-	// If CCK or OFDM, BW must be 20
-	pTxWI->BW = (pTransmit->field.MODE <= MODE_OFDM) ? (BW_20) : (pTransmit->field.BW);
-#ifdef DOT11N_DRAFT3
-	if (pTxWI->BW)
-		pTxWI->BW = (pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth == 0) ? (BW_20) : (pTransmit->field.BW);
-#endif // DOT11N_DRAFT3 //
-
-	pTxWI->MCS = pTransmit->field.MCS;
-	pTxWI->PHYMODE = pTransmit->field.MODE;
-	pTxWI->CFACK = CfAck;
-
-#ifdef DOT11_N_SUPPORT
-	if (pMac)
-	{
-		if (pAd->CommonCfg.bMIMOPSEnable)
-		{
-			if ((pMac->MmpsMode == MMPS_DYNAMIC) && (pTransmit->field.MCS > 7))
-			{
-				// Dynamic MIMO Power Save Mode
-				pTxWI->MIMOps = 1;
-			}
-			else if (pMac->MmpsMode == MMPS_STATIC)
-			{
-				// Static MIMO Power Save Mode
-				if (pTransmit->field.MODE >= MODE_HTMIX && pTransmit->field.MCS > 7)
-				{
-					pTxWI->MCS = 7;
-					pTxWI->MIMOps = 0;
-				}
-			}
-		}
-		//pTxWI->MIMOps = (pMac->PsMode == PWR_MMPS)? 1:0;
-		if (pMac->bIAmBadAtheros && (pMac->WepStatus != Ndis802_11WEPDisabled))
-		{
-			pTxWI->MpduDensity = 7;
-		}
-		else
-		{
-			pTxWI->MpduDensity = pMac->MpduDensity;
-		}
-	}
-#endif // DOT11_N_SUPPORT //
-
-	pTxWI->PacketId = pTxWI->MCS;
-	NdisMoveMemory(pOutTxWI, &TxWI, sizeof(TXWI_STRUC));
-}
-
-
-VOID RTMPWriteTxWI_Data(
-	IN	PRTMP_ADAPTER		pAd,
-	IN	OUT PTXWI_STRUC		pTxWI,
-	IN	TX_BLK				*pTxBlk)
-{
-	HTTRANSMIT_SETTING	*pTransmit;
-	PMAC_TABLE_ENTRY	pMacEntry;
-#ifdef DOT11_N_SUPPORT
-	UCHAR				BASize;
-#endif // DOT11_N_SUPPORT //
-
-
-	ASSERT(pTxWI);
-
-	pTransmit = pTxBlk->pTransmit;
-	pMacEntry = pTxBlk->pMacEntry;
-
-
-	//
-	// Always use Long preamble before verifiation short preamble functionality works well.
-	// Todo: remove the following line if short preamble functionality works
-	//
-	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
-	NdisZeroMemory(pTxWI, TXWI_SIZE);
-
-	pTxWI->FRAG		= TX_BLK_TEST_FLAG(pTxBlk, fTX_bAllowFrag);
-	pTxWI->ACK		= TX_BLK_TEST_FLAG(pTxBlk, fTX_bAckRequired);
-	pTxWI->txop		= pTxBlk->FrameGap;
-
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-	if (pMacEntry &&
-		(pAd->StaCfg.BssType == BSS_INFRA) &&
-		(pMacEntry->ValidAsDls == TRUE))
-		pTxWI->WirelessCliID = BSSID_WCID;
-	else
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-		pTxWI->WirelessCliID		= pTxBlk->Wcid;
-
-	pTxWI->MPDUtotalByteCount	= pTxBlk->MpduHeaderLen + pTxBlk->SrcBufLen;
-	pTxWI->CFACK				= TX_BLK_TEST_FLAG(pTxBlk, fTX_bPiggyBack);
-
-	// If CCK or OFDM, BW must be 20
-	pTxWI->BW = (pTransmit->field.MODE <= MODE_OFDM) ? (BW_20) : (pTransmit->field.BW);
-#ifdef DOT11_N_SUPPORT
-#ifdef DOT11N_DRAFT3
-	if (pTxWI->BW)
-		pTxWI->BW = (pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth == 0) ? (BW_20) : (pTransmit->field.BW);
-#endif // DOT11N_DRAFT3 //
-	pTxWI->AMPDU	= ((pTxBlk->TxFrameType == TX_AMPDU_FRAME) ? TRUE : FALSE);
-
-	// John tune the performace with Intel Client in 20 MHz performance
-	BASize = pAd->CommonCfg.TxBASize;
-	if((pTxBlk->TxFrameType == TX_AMPDU_FRAME) && (pMacEntry))
-	{
-		UCHAR		RABAOriIdx = 0;	//The RA's BA Originator table index.
-
-		RABAOriIdx = pTxBlk->pMacEntry->BAOriWcidArray[pTxBlk->UserPriority];
-		BASize = pAd->BATable.BAOriEntry[RABAOriIdx].BAWinSize;
-	}
-
-#if 0 // 3*3
-	if (BASize > 7)
-		BASize = 7;
-#endif
-
-	pTxWI->TxBF = pTransmit->field.TxBF;
-	pTxWI->BAWinSize = BASize;
-	pTxWI->ShortGI = pTransmit->field.ShortGI;
-	pTxWI->STBC = pTransmit->field.STBC;
-#endif // DOT11_N_SUPPORT //
-
-	pTxWI->MCS = pTransmit->field.MCS;
-	pTxWI->PHYMODE = pTransmit->field.MODE;
-
-#ifdef DOT11_N_SUPPORT
-	if (pMacEntry)
-	{
-		if ((pMacEntry->MmpsMode == MMPS_DYNAMIC) && (pTransmit->field.MCS > 7))
-		{
-			// Dynamic MIMO Power Save Mode
-			pTxWI->MIMOps = 1;
-		}
-		else if (pMacEntry->MmpsMode == MMPS_STATIC)
-		{
-			// Static MIMO Power Save Mode
-			if (pTransmit->field.MODE >= MODE_HTMIX && pTransmit->field.MCS > 7)
-			{
-				pTxWI->MCS = 7;
-				pTxWI->MIMOps = 0;
-			}
-		}
-
-		if (pMacEntry->bIAmBadAtheros && (pMacEntry->WepStatus != Ndis802_11WEPDisabled))
-		{
-			pTxWI->MpduDensity = 7;
-		}
-		else
-		{
-			pTxWI->MpduDensity = pMacEntry->MpduDensity;
-		}
-	}
-#endif // DOT11_N_SUPPORT //
-
-#ifdef DBG_DIAGNOSE
-		if (pTxBlk->QueIdx== 0)
-		{
-			pAd->DiagStruct.TxDataCnt[pAd->DiagStruct.ArrayCurIdx]++;
-			pAd->DiagStruct.TxMcsCnt[pAd->DiagStruct.ArrayCurIdx][pTxWI->MCS]++;
-		}
-#endif // DBG_DIAGNOSE //
-
-	// for rate adapation
-	pTxWI->PacketId = pTxWI->MCS;
-}
-
-
-VOID RTMPWriteTxWI_Cache(
-	IN	PRTMP_ADAPTER		pAd,
-	IN	OUT PTXWI_STRUC		pTxWI,
-	IN	TX_BLK				*pTxBlk)
-{
-	PHTTRANSMIT_SETTING	/*pTxHTPhyMode,*/ pTransmit;
-	PMAC_TABLE_ENTRY	pMacEntry;
-
-	//
-	// update TXWI
-	//
-	pMacEntry = pTxBlk->pMacEntry;
-	pTransmit = pTxBlk->pTransmit;
-
-	if (pMacEntry->bAutoTxRateSwitch)
-	{
-		pTxWI->txop = IFS_HTTXOP;
-
-		// If CCK or OFDM, BW must be 20
-		pTxWI->BW = (pTransmit->field.MODE <= MODE_OFDM) ? (BW_20) : (pTransmit->field.BW);
-		pTxWI->ShortGI = pTransmit->field.ShortGI;
-		pTxWI->STBC = pTransmit->field.STBC;
-
-		pTxWI->MCS = pTransmit->field.MCS;
-		pTxWI->PHYMODE = pTransmit->field.MODE;
-
-		// set PID for TxRateSwitching
-		pTxWI->PacketId = pTransmit->field.MCS;
-	}
-
-#ifdef DOT11_N_SUPPORT
-	pTxWI->AMPDU = ((pMacEntry->NoBADataCountDown == 0) ? TRUE: FALSE);
-	pTxWI->MIMOps = 0;
-
-#ifdef DOT11N_DRAFT3
-	if (pTxWI->BW)
-		pTxWI->BW = (pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth == 0) ? (BW_20) : (pTransmit->field.BW);
-#endif // DOT11N_DRAFT3 //
-
-	if (pAd->CommonCfg.bMIMOPSEnable)
-	{
-		// MIMO Power Save Mode
-		if ((pMacEntry->MmpsMode == MMPS_DYNAMIC) && (pTransmit->field.MCS > 7))
-		{
-			// Dynamic MIMO Power Save Mode
-			pTxWI->MIMOps = 1;
-		}
-		else if (pMacEntry->MmpsMode == MMPS_STATIC)
-		{
-			// Static MIMO Power Save Mode
-			if ((pTransmit->field.MODE >= MODE_HTMIX) && (pTransmit->field.MCS > 7))
-			{
-				pTxWI->MCS = 7;
-				pTxWI->MIMOps = 0;
-			}
-		}
-	}
-#endif // DOT11_N_SUPPORT //
-
-#ifdef DBG_DIAGNOSE
-	if (pTxBlk->QueIdx== 0)
-	{
-		pAd->DiagStruct.TxDataCnt[pAd->DiagStruct.ArrayCurIdx]++;
-		pAd->DiagStruct.TxMcsCnt[pAd->DiagStruct.ArrayCurIdx][pTxWI->MCS]++;
-	}
-#endif // DBG_DIAGNOSE //
-
-	pTxWI->MPDUtotalByteCount = pTxBlk->MpduHeaderLen + pTxBlk->SrcBufLen;
-
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Calculates the duration which is required to transmit out frames
-	with given size and specified rate.
-
-	Arguments:
-		pTxD		Pointer to transmit descriptor
-		Ack 		Setting for Ack requirement bit
-		Fragment	Setting for Fragment bit
-		RetryMode	Setting for retry mode
-		Ifs 		Setting for IFS gap
-		Rate		Setting for transmit rate
-		Service 	Setting for service
-		Length		Frame length
-		TxPreamble	Short or Long preamble when using CCK rates
-		QueIdx - 0-3, according to 802.11e/d4.4 June/2003
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	========================================================================
-*/
-VOID RTMPWriteTxDescriptor(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PTXD_STRUC		pTxD,
-	IN	BOOLEAN 		bWIV,
-	IN	UCHAR			QueueSEL)
-{
-	//
-	// Always use Long preamble before verifiation short preamble functionality works well.
-	// Todo: remove the following line if short preamble functionality works
-	//
-	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
-
-	pTxD->WIV	= (bWIV) ? 1: 0;
-	pTxD->QSEL= (QueueSEL);
-	//RT2860c??  fixed using EDCA queue for test...  We doubt Queue1 has problem.  2006-09-26 Jan
-	//pTxD->QSEL= FIFO_EDCA;
-	if (pAd->bGenOneHCCA == TRUE)
-		pTxD->QSEL= FIFO_HCCA;
-	pTxD->DMADONE = 0;
-}
-
-
-// should be called only when -
-// 1. MEADIA_CONNECTED
-// 2. AGGREGATION_IN_USED
-// 3. Fragmentation not in used
-// 4. either no previous frame (pPrevAddr1=NULL) .OR. previoud frame is aggregatible
-BOOLEAN TxFrameIsAggregatible(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pPrevAddr1,
-	IN	PUCHAR			p8023hdr)
-{
-
-	// can't aggregate EAPOL (802.1x) frame
-	if ((p8023hdr[12] == 0x88) && (p8023hdr[13] == 0x8e))
-		return FALSE;
-
-	// can't aggregate multicast/broadcast frame
-	if (p8023hdr[0] & 0x01)
-		return FALSE;
-
-	if (INFRA_ON(pAd)) // must be unicast to AP
-		return TRUE;
-	else if ((pPrevAddr1 == NULL) || MAC_ADDR_EQUAL(pPrevAddr1, p8023hdr)) // unicast to same STA
-		return TRUE;
-	else
-		return FALSE;
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-	   Check the MSDU Aggregation policy
-	1.HT aggregation is A-MSDU
-	2.legaacy rate aggregation is software aggregation by Ralink.
-
-	Arguments:
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-BOOLEAN PeerIsAggreOn(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	ULONG		   TxRate,
-	IN	PMAC_TABLE_ENTRY pMacEntry)
-{
-	ULONG	AFlags = (fCLIENT_STATUS_AMSDU_INUSED | fCLIENT_STATUS_AGGREGATION_CAPABLE);
-
-	if (pMacEntry != NULL && CLIENT_STATUS_TEST_FLAG(pMacEntry, AFlags))
-	{
-#ifdef DOT11_N_SUPPORT
-		if (pMacEntry->HTPhyMode.field.MODE >= MODE_HTMIX)
-		{
-			return TRUE;
-		}
-#endif // DOT11_N_SUPPORT //
-
-#ifdef AGGREGATION_SUPPORT
-		if (TxRate >= RATE_6 && pAd->CommonCfg.bAggregationCapable && (!(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) && CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_WMM_CAPABLE))))
-		{	// legacy  Ralink Aggregation support
-			return TRUE;
-		}
-#endif // AGGREGATION_SUPPORT //
-	}
-
-	return FALSE;
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Check and fine the packet waiting in SW queue with highest priority
-
-	Arguments:
-		pAd Pointer to our adapter
-
-	Return Value:
-		pQueue		Pointer to Waiting Queue
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-PQUEUE_HEADER	RTMPCheckTxSwQueue(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT PUCHAR			pQueIdx)
-{
-
-	ULONG	Number;
-	// 2004-11-15 to be removed. test aggregation only
-//	if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED)) && (*pNumber < 2))
-//		 return NULL;
-
-	Number = pAd->TxSwQueue[QID_AC_BK].Number
-			 + pAd->TxSwQueue[QID_AC_BE].Number
-			 + pAd->TxSwQueue[QID_AC_VI].Number
-			 + pAd->TxSwQueue[QID_AC_VO].Number
-			 + pAd->TxSwQueue[QID_HCCA].Number;
-
-	if (pAd->TxSwQueue[QID_AC_VO].Head != NULL)
-	{
-		*pQueIdx = QID_AC_VO;
-		return (&pAd->TxSwQueue[QID_AC_VO]);
-	}
-	else if (pAd->TxSwQueue[QID_AC_VI].Head != NULL)
-	{
-		*pQueIdx = QID_AC_VI;
-		return (&pAd->TxSwQueue[QID_AC_VI]);
-	}
-	else if (pAd->TxSwQueue[QID_AC_BE].Head != NULL)
-	{
-		*pQueIdx = QID_AC_BE;
-		return (&pAd->TxSwQueue[QID_AC_BE]);
-	}
-	else if (pAd->TxSwQueue[QID_AC_BK].Head != NULL)
-	{
-		*pQueIdx = QID_AC_BK;
-		return (&pAd->TxSwQueue[QID_AC_BK]);
-	}
-	else if (pAd->TxSwQueue[QID_HCCA].Head != NULL)
-	{
-		*pQueIdx = QID_HCCA;
-		return (&pAd->TxSwQueue[QID_HCCA]);
-	}
-
-	// No packet pending in Tx Sw queue
-	*pQueIdx = QID_AC_BK;
-
-	return (NULL);
-}
-
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Suspend MSDU transmission
-
-	Arguments:
-		pAd 	Pointer to our adapter
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPSuspendMsduTransmission(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	DBGPRINT(RT_DEBUG_TRACE,("SCANNING, suspend MSDU transmission ...\n"));
-
-
-	//
-	// Before BSS_SCAN_IN_PROGRESS, we need to keep Current R66 value and
-	// use Lowbound as R66 value on ScanNextChannel(...)
-	//
-	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66, &pAd->BbpTuning.R66CurrentValue);
-
-	// set BBP_R66 to 0x30/0x40 when scanning (AsicSwitchChannel will set R66 according to channel when scanning)
-	//RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, (0x26 + GET_LNA_GAIN(pAd)));
-	RTMPSetAGCInitValue(pAd, BW_20);
-
-	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
-	//RTMP_IO_WRITE32(pAd, TX_CNTL_CSR, 0x000f0000);		// abort all TX rings
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Resume MSDU transmission
-
-	Arguments:
-		pAd 	Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID RTMPResumeMsduTransmission(
-	IN	PRTMP_ADAPTER	pAd)
-{
-//    UCHAR			IrqState;
-
-	DBGPRINT(RT_DEBUG_TRACE,("SCAN done, resume MSDU transmission ...\n"));
-
-
-	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, pAd->BbpTuning.R66CurrentValue);
-
-	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
-// sample, for IRQ LOCK to SEM LOCK
-//    IrqState = pAd->irq_disabled;
-//	if (IrqState)
-//		RTMPDeQueuePacket(pAd, TRUE, NUM_OF_TX_RING, MAX_TX_PROCESS);
-//    else
-	RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS);
-}
-
-
-UINT deaggregate_AMSDU_announce(
-	IN	PRTMP_ADAPTER	pAd,
-	PNDIS_PACKET		pPacket,
-	IN	PUCHAR			pData,
-	IN	ULONG			DataSize)
-{
-	USHORT 			PayloadSize;
-	USHORT 			SubFrameSize;
-	PHEADER_802_3 	pAMSDUsubheader;
-	UINT			nMSDU;
-    UCHAR			Header802_3[14];
-
-	PUCHAR			pPayload, pDA, pSA, pRemovedLLCSNAP;
-	PNDIS_PACKET	pClonePacket;
-
-
-
-	nMSDU = 0;
-
-	while (DataSize > LENGTH_802_3)
-	{
-
-		nMSDU++;
-
-		//hex_dump("subheader", pData, 64);
-		pAMSDUsubheader = (PHEADER_802_3)pData;
-		//pData += LENGTH_802_3;
-		PayloadSize = pAMSDUsubheader->Octet[1] + (pAMSDUsubheader->Octet[0]<<8);
-		SubFrameSize = PayloadSize + LENGTH_802_3;
-
-
-		if ((DataSize < SubFrameSize) || (PayloadSize > 1518 ))
-		{
-			break;
-		}
-
-		//printk("%d subframe: Size = %d\n",  nMSDU, PayloadSize);
-
-		pPayload = pData + LENGTH_802_3;
-		pDA = pData;
-		pSA = pData + MAC_ADDR_LEN;
-
-		// convert to 802.3 header
-        CONVERT_TO_802_3(Header802_3, pDA, pSA, pPayload, PayloadSize, pRemovedLLCSNAP);
-
-#ifdef CONFIG_STA_SUPPORT
-		if ((Header802_3[12] == 0x88) && (Header802_3[13] == 0x8E) )
-		{
-		    // avoid local heap overflow, use dyanamic allocation
-		   MLME_QUEUE_ELEM *Elem = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);
-		   memmove(Elem->Msg+(LENGTH_802_11 + LENGTH_802_1_H), pPayload, PayloadSize);
-		   Elem->MsgLen = LENGTH_802_11 + LENGTH_802_1_H + PayloadSize;
-		   WpaEAPOLKeyAction(pAd, Elem);
-		   kfree(Elem);
-		}
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-	        	if (pRemovedLLCSNAP)
-	        	{
-	    			pPayload -= LENGTH_802_3;
-	    			PayloadSize += LENGTH_802_3;
-	    			NdisMoveMemory(pPayload, &Header802_3[0], LENGTH_802_3);
-	        	}
-		}
-#endif // CONFIG_STA_SUPPORT //
-
-		pClonePacket = ClonePacket(pAd, pPacket, pPayload, PayloadSize);
-		if (pClonePacket)
-		{
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pClonePacket, RTMP_GET_PACKET_IF(pPacket));
-#endif // CONFIG_STA_SUPPORT //
-		}
-
-
-		// A-MSDU has padding to multiple of 4 including subframe header.
-		// align SubFrameSize up to multiple of 4
-		SubFrameSize = (SubFrameSize+3)&(~0x3);
-
-
-		if (SubFrameSize > 1528 || SubFrameSize < 32)
-		{
-			break;
-		}
-
-		if (DataSize > SubFrameSize)
-		{
-			pData += SubFrameSize;
-			DataSize -= SubFrameSize;
-		}
-		else
-		{
-			// end of A-MSDU
-			DataSize = 0;
-		}
-	}
-
-	// finally release original rx packet
-	RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);
-
-	return nMSDU;
-}
-
-
-UINT BA_Reorder_AMSDU_Annnounce(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket)
-{
-	PUCHAR			pData;
-	USHORT			DataSize;
-	UINT			nMSDU = 0;
-
-	pData = (PUCHAR) GET_OS_PKT_DATAPTR(pPacket);
-	DataSize = (USHORT) GET_OS_PKT_LEN(pPacket);
-
-	nMSDU = deaggregate_AMSDU_announce(pAd, pPacket, pData, DataSize);
-
-	return nMSDU;
-}
-
-
-/*
-	==========================================================================
-	Description:
-		Look up the MAC address in the MAC table. Return NULL if not found.
-	Return:
-		pEntry - pointer to the MAC entry; NULL is not found
-	==========================================================================
-*/
-MAC_TABLE_ENTRY *MacTableLookup(
-	IN PRTMP_ADAPTER pAd,
-	PUCHAR pAddr)
-{
-	ULONG HashIdx;
-	MAC_TABLE_ENTRY *pEntry = NULL;
-
-	HashIdx = MAC_ADDR_HASH_INDEX(pAddr);
-	pEntry = pAd->MacTab.Hash[HashIdx];
-
-	while (pEntry && (pEntry->ValidAsCLI || pEntry->ValidAsWDS || pEntry->ValidAsApCli || pEntry->ValidAsMesh))
-	{
-		if (MAC_ADDR_EQUAL(pEntry->Addr, pAddr))
-		{
-			break;
-		}
-		else
-			pEntry = pEntry->pNext;
-	}
-
-	return pEntry;
-}
-
-MAC_TABLE_ENTRY *MacTableInsertEntry(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR			pAddr,
-	IN	UCHAR			apidx,
-	IN BOOLEAN	CleanAll)
-{
-	UCHAR HashIdx;
-	int i, FirstWcid;
-	MAC_TABLE_ENTRY *pEntry = NULL, *pCurrEntry;
-
-	// if FULL, return
-	if (pAd->MacTab.Size >= MAX_LEN_OF_MAC_TABLE)
-		return NULL;
-
-	FirstWcid = 1;
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	if (pAd->StaCfg.BssType == BSS_INFRA)
-		FirstWcid = 2;
-#endif // CONFIG_STA_SUPPORT //
-
-	// allocate one MAC entry
-	NdisAcquireSpinLock(&pAd->MacTabLock);
-	for (i = FirstWcid; i< MAX_LEN_OF_MAC_TABLE; i++)   // skip entry#0 so that "entry index == AID" for fast lookup
-	{
-		// pick up the first available vacancy
-		if ((pAd->MacTab.Content[i].ValidAsCLI == FALSE) &&
-			(pAd->MacTab.Content[i].ValidAsWDS == FALSE) &&
-			(pAd->MacTab.Content[i].ValidAsApCli== FALSE) &&
-			(pAd->MacTab.Content[i].ValidAsMesh == FALSE)
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-			&& (pAd->MacTab.Content[i].ValidAsDls == FALSE)
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-			)
-		{
-			pEntry = &pAd->MacTab.Content[i];
-			if (CleanAll == TRUE)
-			{
-				pEntry->MaxSupportedRate = RATE_11;
-				pEntry->CurrTxRate = RATE_11;
-				NdisZeroMemory(pEntry, sizeof(MAC_TABLE_ENTRY));
-				pEntry->PairwiseKey.KeyLen = 0;
-				pEntry->PairwiseKey.CipherAlg = CIPHER_NONE;
-			}
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-			if (apidx >= MIN_NET_DEVICE_FOR_DLS)
-			{
-				pEntry->ValidAsCLI = FALSE;
-				pEntry->ValidAsWDS = FALSE;
-				pEntry->ValidAsApCli = FALSE;
-				pEntry->ValidAsMesh = FALSE;
-				pEntry->ValidAsDls = TRUE;
-				pEntry->isCached = FALSE;
-			}
-			else
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-			{
-
-#ifdef CONFIG_STA_SUPPORT
-				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				{
-					pEntry->ValidAsCLI = TRUE;
-					pEntry->ValidAsWDS = FALSE;
-					pEntry->ValidAsApCli = FALSE;
-					pEntry->ValidAsMesh = FALSE;
-					pEntry->ValidAsDls = FALSE;
-				}
-#endif // CONFIG_STA_SUPPORT //
-			}
-
-			pEntry->bIAmBadAtheros = FALSE;
-			pEntry->pAd = pAd;
-			pEntry->CMTimerRunning = FALSE;
-			pEntry->EnqueueEapolStartTimerRunning = EAPOL_START_DISABLE;
-			pEntry->RSNIE_Len = 0;
-			NdisZeroMemory(pEntry->R_Counter, sizeof(pEntry->R_Counter));
-			pEntry->ReTryCounter = PEER_MSG1_RETRY_TIMER_CTR;
-
-			if (pEntry->ValidAsMesh)
-				pEntry->apidx = (apidx - MIN_NET_DEVICE_FOR_MESH);
-			else if (pEntry->ValidAsApCli)
-				pEntry->apidx = (apidx - MIN_NET_DEVICE_FOR_APCLI);
-			else if (pEntry->ValidAsWDS)
-				pEntry->apidx = (apidx - MIN_NET_DEVICE_FOR_WDS);
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-			else if (pEntry->ValidAsDls)
-				pEntry->apidx = (apidx - MIN_NET_DEVICE_FOR_DLS);
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-			else
-				pEntry->apidx = apidx;
-
-			{
-
-#ifdef CONFIG_STA_SUPPORT
-				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				{
-					pEntry->AuthMode = pAd->StaCfg.AuthMode;
-					pEntry->WepStatus = pAd->StaCfg.WepStatus;
-					pEntry->PrivacyFilter = Ndis802_11PrivFilterAcceptAll;
-				}
-#endif // CONFIG_STA_SUPPORT //
-			}
-
-			pEntry->GTKState = REKEY_NEGOTIATING;
-			pEntry->PairwiseKey.KeyLen = 0;
-			pEntry->PairwiseKey.CipherAlg = CIPHER_NONE;
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-			if (pEntry->ValidAsDls == TRUE)
-				pEntry->PortSecured = WPA_802_1X_PORT_SECURED;
-#endif //QOS_DLS_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-			pEntry->PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-			pEntry->PMKID_CacheIdx = ENTRY_NOT_FOUND;
-			COPY_MAC_ADDR(pEntry->Addr, pAddr);
-			pEntry->Sst = SST_NOT_AUTH;
-			pEntry->AuthState = AS_NOT_AUTH;
-			pEntry->Aid = (USHORT)i;  //0;
-			pEntry->CapabilityInfo = 0;
-			pEntry->PsMode = PWR_ACTIVE;
-			pEntry->PsQIdleCount = 0;
-			pEntry->NoDataIdleCount = 0;
-			pEntry->ContinueTxFailCnt = 0;
-			InitializeQueueHeader(&pEntry->PsQueue);
-
-
-			pAd->MacTab.Size ++;
-			// Add this entry into ASIC RX WCID search table
-			RT28XX_STA_ENTRY_ADD(pAd, pEntry);
-
-			DBGPRINT(RT_DEBUG_TRACE, ("MacTableInsertEntry - allocate entry #%d, Total= %d\n",i, pAd->MacTab.Size));
-			break;
-		}
-	}
-
-	// add this MAC entry into HASH table
-	if (pEntry)
-	{
-		HashIdx = MAC_ADDR_HASH_INDEX(pAddr);
-		if (pAd->MacTab.Hash[HashIdx] == NULL)
-		{
-			pAd->MacTab.Hash[HashIdx] = pEntry;
-		}
-		else
-		{
-			pCurrEntry = pAd->MacTab.Hash[HashIdx];
-			while (pCurrEntry->pNext != NULL)
-				pCurrEntry = pCurrEntry->pNext;
-			pCurrEntry->pNext = pEntry;
-		}
-	}
-
-	NdisReleaseSpinLock(&pAd->MacTabLock);
-	return pEntry;
-}
-
-/*
-	==========================================================================
-	Description:
-		Delete a specified client from MAC table
-	==========================================================================
- */
-BOOLEAN MacTableDeleteEntry(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT wcid,
-	IN PUCHAR pAddr)
-{
-	USHORT HashIdx;
-	MAC_TABLE_ENTRY *pEntry, *pPrevEntry, *pProbeEntry;
-	BOOLEAN Cancelled;
-	//USHORT	offset;	// unused variable
-	//UCHAR	j;			// unused variable
-
-	if (wcid >= MAX_LEN_OF_MAC_TABLE)
-		return FALSE;
-
-	NdisAcquireSpinLock(&pAd->MacTabLock);
-
-	HashIdx = MAC_ADDR_HASH_INDEX(pAddr);
-	//pEntry = pAd->MacTab.Hash[HashIdx];
-	pEntry = &pAd->MacTab.Content[wcid];
-
-	if (pEntry && (pEntry->ValidAsCLI || pEntry->ValidAsApCli || pEntry->ValidAsWDS || pEntry->ValidAsMesh
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
- 		|| pEntry->ValidAsDls
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-		))
-	{
-		if (MAC_ADDR_EQUAL(pEntry->Addr, pAddr))
-		{
-
-			// Delete this entry from ASIC on-chip WCID Table
-			RT28XX_STA_ENTRY_MAC_RESET(pAd, wcid);
-
-#ifdef DOT11_N_SUPPORT
-			// free resources of BA
-			BASessionTearDownALL(pAd, pEntry->Aid);
-#endif // DOT11_N_SUPPORT //
-
-
-			pPrevEntry = NULL;
-			pProbeEntry = pAd->MacTab.Hash[HashIdx];
-			ASSERT(pProbeEntry);
-
-			// update Hash list
-			do
-			{
-				if (pProbeEntry == pEntry)
-				{
-					if (pPrevEntry == NULL)
-					{
-						pAd->MacTab.Hash[HashIdx] = pEntry->pNext;
-					}
-					else
-					{
-						pPrevEntry->pNext = pEntry->pNext;
-					}
-					break;
-				}
-
-				pPrevEntry = pProbeEntry;
-				pProbeEntry = pProbeEntry->pNext;
-			} while (pProbeEntry);
-
-			// not found !!!
-			ASSERT(pProbeEntry != NULL);
-
-			RT28XX_STA_ENTRY_KEY_DEL(pAd, BSS0, wcid);
-
-
-		if (pEntry->EnqueueEapolStartTimerRunning != EAPOL_START_DISABLE)
-		{
-			RTMPCancelTimer(&pEntry->EnqueueStartForPSKTimer, &Cancelled);
-			pEntry->EnqueueEapolStartTimerRunning = EAPOL_START_DISABLE;
-		}
-
-
-   			NdisZeroMemory(pEntry, sizeof(MAC_TABLE_ENTRY));
-			pAd->MacTab.Size --;
-			DBGPRINT(RT_DEBUG_TRACE, ("MacTableDeleteEntry1 - Total= %d\n", pAd->MacTab.Size));
-		}
-		else
-		{
-			printk("\n%s: Impossible Wcid = %d !!!!!\n", __func__, wcid);
-		}
-	}
-
-	NdisReleaseSpinLock(&pAd->MacTabLock);
-
-	//Reset operating mode when no Sta.
-	if (pAd->MacTab.Size == 0)
-	{
-#ifdef DOT11_N_SUPPORT
-		pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode = 0;
-#endif // DOT11_N_SUPPORT //
-		AsicUpdateProtect(pAd, 0 /*pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode*/, (ALLN_SETPROTECT), TRUE, 0 /*pAd->MacTab.fAnyStationNonGF*/);
-	}
-
-	return TRUE;
-}
-
-
-/*
-	==========================================================================
-	Description:
-		This routine reset the entire MAC table. All packets pending in
-		the power-saving queues are freed here.
-	==========================================================================
- */
-VOID MacTableReset(
-	IN  PRTMP_ADAPTER  pAd)
-{
-	int         i;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("MacTableReset\n"));
-	//NdisAcquireSpinLock(&pAd->MacTabLock);
-
-	for (i=1; i<MAX_LEN_OF_MAC_TABLE; i++)
-	{
-		if (pAd->MacTab.Content[i].ValidAsCLI == TRUE)
-	   {
-
-#ifdef DOT11_N_SUPPORT
-			// free resources of BA
-			BASessionTearDownALL(pAd, i);
-#endif // DOT11_N_SUPPORT //
-
-			pAd->MacTab.Content[i].ValidAsCLI = FALSE;
-
-
-
-#ifdef RT2870
-			NdisZeroMemory(pAd->MacTab.Content[i].Addr, 6);
-			RT28XX_STA_ENTRY_MAC_RESET(pAd, i);
-#endif // RT2870 //
-
-			//AsicDelWcidTab(pAd, i);
-		}
-	}
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID AssocParmFill(
-	IN PRTMP_ADAPTER pAd,
-	IN OUT MLME_ASSOC_REQ_STRUCT *AssocReq,
-	IN PUCHAR                     pAddr,
-	IN USHORT                     CapabilityInfo,
-	IN ULONG                      Timeout,
-	IN USHORT                     ListenIntv)
-{
-	COPY_MAC_ADDR(AssocReq->Addr, pAddr);
-	// Add mask to support 802.11b mode only
-	AssocReq->CapabilityInfo = CapabilityInfo & SUPPORTED_CAPABILITY_INFO; // not cf-pollable, not cf-poll-request
-	AssocReq->Timeout = Timeout;
-	AssocReq->ListenIntv = ListenIntv;
-}
-
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID DisassocParmFill(
-	IN PRTMP_ADAPTER pAd,
-	IN OUT MLME_DISASSOC_REQ_STRUCT *DisassocReq,
-	IN PUCHAR pAddr,
-	IN USHORT Reason)
-{
-	COPY_MAC_ADDR(DisassocReq->Addr, pAddr);
-	DisassocReq->Reason = Reason;
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Check the out going frame, if this is an DHCP or ARP datagram
-	will be duplicate another frame at low data rate transmit.
-
-	Arguments:
-		pAd 		Pointer to our adapter
-		pPacket 	Pointer to outgoing Ndis frame
-
-	Return Value:
-		TRUE		To be duplicate at Low data rate transmit. (1mb)
-		FALSE		Do nothing.
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-		MAC header + IP Header + UDP Header
-		  14 Bytes	  20 Bytes
-
-		UDP Header
-		00|01|02|03|04|05|06|07|08|09|10|11|12|13|14|15|
-						Source Port
-		16|17|18|19|20|21|22|23|24|25|26|27|28|29|30|31|
-					Destination Port
-
-		port 0x43 means Bootstrap Protocol, server.
-		Port 0x44 means Bootstrap Protocol, client.
-
-	========================================================================
-*/
-
-BOOLEAN RTMPCheckDHCPFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket)
-{
-	PACKET_INFO 	PacketInfo;
-	ULONG			NumberOfBytesRead = 0;
-	ULONG			CurrentOffset = 0;
-	PVOID			pVirtualAddress = NULL;
-	UINT			NdisBufferLength;
-	PUCHAR			pSrc;
-	USHORT			Protocol;
-	UCHAR			ByteOffset36 = 0;
-	UCHAR			ByteOffset38 = 0;
-	BOOLEAN 		ReadFirstParm = TRUE;
-
-	RTMP_QueryPacketInfo(pPacket, &PacketInfo, (PUCHAR *)&pVirtualAddress, &NdisBufferLength);
-
-	NumberOfBytesRead += NdisBufferLength;
-	pSrc = (PUCHAR) pVirtualAddress;
-	Protocol = *(pSrc + 12) * 256 + *(pSrc + 13);
-
-	//
-	// Check DHCP & BOOTP protocol
-	//
-	while (NumberOfBytesRead <= PacketInfo.TotalPacketLength)
-	{
-		if ((NumberOfBytesRead >= 35) && (ReadFirstParm == TRUE))
-		{
-			CurrentOffset = 35 - (NumberOfBytesRead - NdisBufferLength);
-			ByteOffset36 = *(pSrc + CurrentOffset);
-			ReadFirstParm = FALSE;
-		}
-
-		if (NumberOfBytesRead >= 37)
-		{
-			CurrentOffset = 37 - (NumberOfBytesRead - NdisBufferLength);
-			ByteOffset38 = *(pSrc + CurrentOffset);
-			//End of Read
-			break;
-		}
-		return FALSE;
-	}
-
-	// Check for DHCP & BOOTP protocol
-	if ((ByteOffset36 != 0x44) || (ByteOffset38 != 0x43))
-		{
-		//
-		// 2054 (hex 0806) for ARP datagrams
-		// if this packet is not ARP datagrams, then do nothing
-		// ARP datagrams will also be duplicate at 1mb broadcast frames
-		//
-		if (Protocol != 0x0806 )
-			return FALSE;
-		}
-
-	return TRUE;
-}
-
-
-BOOLEAN RTMPCheckEtherType(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket)
-{
-	USHORT	TypeLen;
-	UCHAR	Byte0, Byte1;
-	PUCHAR	pSrcBuf;
-	UINT32	pktLen;
-	UINT16 	srcPort, dstPort;
-	BOOLEAN	status = TRUE;
-
-
-	pSrcBuf = GET_OS_PKT_DATAPTR(pPacket);
-	pktLen = GET_OS_PKT_LEN(pPacket);
-
-	ASSERT(pSrcBuf);
-
-	RTMP_SET_PACKET_SPECIFIC(pPacket, 0);
-
-	// get Ethernet protocol field
-	TypeLen = (pSrcBuf[12] << 8) + pSrcBuf[13];
-
-	pSrcBuf += LENGTH_802_3;	// Skip the Ethernet Header.
-
-	if (TypeLen <= 1500)
-	{	// 802.3, 802.3 LLC
-		/*
-			DestMAC(6) + SrcMAC(6) + Lenght(2) +
-			DSAP(1) + SSAP(1) + Control(1) +
-			if the DSAP = 0xAA, SSAP=0xAA, Contorl = 0x03, it has a 5-bytes SNAP header.
-				=> + SNAP (5, OriginationID(3) + etherType(2))
-		*/
-		if (pSrcBuf[0] == 0xAA && pSrcBuf[1] == 0xAA && pSrcBuf[2] == 0x03)
-		{
-			Sniff2BytesFromNdisBuffer(pSrcBuf, 6, &Byte0, &Byte1);
-			RTMP_SET_PACKET_LLCSNAP(pPacket, 1);
-			TypeLen = (USHORT)((Byte0 << 8) + Byte1);
-			pSrcBuf += 8; // Skip this LLC/SNAP header
-		}
-		else
-		{
-			//It just has 3-byte LLC header, maybe a legacy ether type frame. we didn't handle it.
-		}
-	}
-
-	// If it's a VLAN packet, get the real Type/Length field.
-	if (TypeLen == 0x8100)
-	{
-		/* 0x8100 means VLAN packets */
-
-		/* Dest. MAC Address (6-bytes) +
-		   Source MAC Address (6-bytes) +
-		   Length/Type = 802.1Q Tag Type (2-byte) +
-		   Tag Control Information (2-bytes) +
-		   Length / Type (2-bytes) +
-		   data payload (0-n bytes) +
-		   Pad (0-p bytes) +
-		   Frame Check Sequence (4-bytes) */
-
-		RTMP_SET_PACKET_VLAN(pPacket, 1);
-		Sniff2BytesFromNdisBuffer(pSrcBuf, 2, &Byte0, &Byte1);
-		TypeLen = (USHORT)((Byte0 << 8) + Byte1);
-
-		pSrcBuf += 4; // Skip the VLAN Header.
-	}
-
-	switch (TypeLen)
-	{
-		case 0x0800:
-			{
-				ASSERT((pktLen > 34));
-				if (*(pSrcBuf + 9) == 0x11)
-				{	// udp packet
-					ASSERT((pktLen > 34));	// 14 for ethernet header, 20 for IP header
-
-					pSrcBuf += 20;	// Skip the IP header
-					srcPort = OS_NTOHS(*((UINT16 *)pSrcBuf));
-					dstPort = OS_NTOHS(*((UINT16 *)(pSrcBuf +2)));
-
-					if ((srcPort==0x44 && dstPort==0x43) || (srcPort==0x43 && dstPort==0x44))
-					{	//It's a BOOTP/DHCP packet
-						RTMP_SET_PACKET_DHCP(pPacket, 1);
-					}
-				}
-			}
-			break;
-		case 0x0806:
-			{
-				//ARP Packet.
-				RTMP_SET_PACKET_DHCP(pPacket, 1);
-			}
-			break;
-		case 0x888e:
-			{
-				// EAPOL Packet.
-				RTMP_SET_PACKET_EAPOL(pPacket, 1);
-			}
-			break;
-		default:
-			status = FALSE;
-			break;
-	}
-
-	return status;
-
-}
-
-
-
-VOID Update_Rssi_Sample(
-	IN PRTMP_ADAPTER	pAd,
-	IN RSSI_SAMPLE		*pRssi,
-	IN PRXWI_STRUC		pRxWI)
-		{
-	CHAR	rssi0 = pRxWI->RSSI0;
-	CHAR	rssi1 = pRxWI->RSSI1;
-	CHAR	rssi2 = pRxWI->RSSI2;
-
-	if (rssi0 != 0)
-	{
-		pRssi->LastRssi0	= ConvertToRssi(pAd, (CHAR)rssi0, RSSI_0);
-		pRssi->AvgRssi0X8	= (pRssi->AvgRssi0X8 - pRssi->AvgRssi0) + pRssi->LastRssi0;
-		pRssi->AvgRssi0	= pRssi->AvgRssi0X8 >> 3;
-	}
-
-	if (rssi1 != 0)
-	{
-		pRssi->LastRssi1	= ConvertToRssi(pAd, (CHAR)rssi1, RSSI_1);
-		pRssi->AvgRssi1X8	= (pRssi->AvgRssi1X8 - pRssi->AvgRssi1) + pRssi->LastRssi1;
-		pRssi->AvgRssi1	= pRssi->AvgRssi1X8 >> 3;
-	}
-
-	if (rssi2 != 0)
-	{
-		pRssi->LastRssi2	= ConvertToRssi(pAd, (CHAR)rssi2, RSSI_2);
-		pRssi->AvgRssi2X8  = (pRssi->AvgRssi2X8 - pRssi->AvgRssi2) + pRssi->LastRssi2;
-		pRssi->AvgRssi2 = pRssi->AvgRssi2X8 >> 3;
-	}
-}
-
-
-
-// Normal legacy Rx packet indication
-VOID Indicate_Legacy_Packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID)
-{
-	PNDIS_PACKET	pRxPacket = pRxBlk->pRxPacket;
-	UCHAR			Header802_3[LENGTH_802_3];
-
-	// 1. get 802.3 Header
-	// 2. remove LLC
-	// 		a. pointer pRxBlk->pData to payload
-	//      b. modify pRxBlk->DataSize
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
-#endif // CONFIG_STA_SUPPORT //
-
-	if (pRxBlk->DataSize > MAX_RX_PKT_LEN)
-	{
-#if 0 // sample take off, for multiple card design
-		static int err_size;
-
-		err_size++;
-		if (err_size > 20)
-		{
-			 printk("Legacy DataSize = %d\n", pRxBlk->DataSize);
-			 hex_dump("802.3 Header", Header802_3, LENGTH_802_3);
-			 hex_dump("Payload", pRxBlk->pData, 64);
-			 err_size = 0;
-		}
-#endif
-
-		// release packet
-		RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
-		return;
-	}
-
-
-	STATS_INC_RX_PACKETS(pAd, FromWhichBSSID);
-
-#ifdef RT2870
-#ifdef DOT11_N_SUPPORT
-	if (pAd->CommonCfg.bDisableReordering == 0)
-	{
-		PBA_REC_ENTRY		pBAEntry;
-		ULONG				Now32;
-		UCHAR				Wcid = pRxBlk->pRxWI->WirelessCliID;
-		UCHAR				TID = pRxBlk->pRxWI->TID;
-		USHORT				Idx;
-
-#define REORDERING_PACKET_TIMEOUT		((100 * HZ)/1000)	// system ticks -- 100 ms
-
-		if (Wcid < MAX_LEN_OF_MAC_TABLE)
-		{
-			Idx = pAd->MacTab.Content[Wcid].BARecWcidArray[TID];
-			if (Idx != 0)
-			{
-				pBAEntry = &pAd->BATable.BARecEntry[Idx];
-				// update last rx time
-				NdisGetSystemUpTime(&Now32);
-				if ((pBAEntry->list.qlen > 0) &&
-					 RTMP_TIME_AFTER((unsigned long)Now32, (unsigned long)(pBAEntry->LastIndSeqAtTimer+(REORDERING_PACKET_TIMEOUT)))
-	   				)
-				{
-					printk("Indicate_Legacy_Packet():flush reordering_timeout_mpdus! RxWI->Flags=%d, pRxWI.TID=%d, RxD->AMPDU=%d!\n", pRxBlk->Flags, pRxBlk->pRxWI->TID, pRxBlk->RxD.AMPDU);
-					hex_dump("Dump the legacy Packet:", GET_OS_PKT_DATAPTR(pRxBlk->pRxPacket), 64);
-					ba_flush_reordering_timeout_mpdus(pAd, pBAEntry, Now32);
-				}
-			}
-		}
-	}
-#endif // DOT11_N_SUPPORT //
-#endif // RT2870 //
-
-	wlan_802_11_to_802_3_packet(pAd, pRxBlk, Header802_3, FromWhichBSSID);
-
-	//
-	// pass this 802.3 packet to upper layer or forward this packet to WM directly
-	//
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pRxPacket, FromWhichBSSID);
-#endif // CONFIG_STA_SUPPORT //
-
-}
-
-
-// Normal, AMPDU or AMSDU
-VOID CmmRxnonRalinkFrameIndicate(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID)
-{
-#ifdef DOT11_N_SUPPORT
-	if (RX_BLK_TEST_FLAG(pRxBlk, fRX_AMPDU) && (pAd->CommonCfg.bDisableReordering == 0))
-	{
-		Indicate_AMPDU_Packet(pAd, pRxBlk, FromWhichBSSID);
-	}
-	else
-#endif // DOT11_N_SUPPORT //
-	{
-#ifdef DOT11_N_SUPPORT
-		if (RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU))
-		{
-			// handle A-MSDU
-			Indicate_AMSDU_Packet(pAd, pRxBlk, FromWhichBSSID);
-		}
-		else
-#endif // DOT11_N_SUPPORT //
-		{
-			Indicate_Legacy_Packet(pAd, pRxBlk, FromWhichBSSID);
-		}
-	}
-}
-
-
-VOID CmmRxRalinkFrameIndicate(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MAC_TABLE_ENTRY	*pEntry,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID)
-{
-	UCHAR			Header802_3[LENGTH_802_3];
-	UINT16			Msdu2Size;
-	UINT16 			Payload1Size, Payload2Size;
-	PUCHAR 			pData2;
-	PNDIS_PACKET	pPacket2 = NULL;
-
-
-
-	Msdu2Size = *(pRxBlk->pData) + (*(pRxBlk->pData+1) << 8);
-
-	if ((Msdu2Size <= 1536) && (Msdu2Size < pRxBlk->DataSize))
-	{
-		/* skip two byte MSDU2 len */
-		pRxBlk->pData += 2;
-		pRxBlk->DataSize -= 2;
-	}
-	else
-	{
-		// release packet
-		RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
-		return;
-	}
-
-	// get 802.3 Header and  remove LLC
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
-#endif // CONFIG_STA_SUPPORT //
-
-
-	ASSERT(pRxBlk->pRxPacket);
-
-	// Ralink Aggregation frame
-	pAd->RalinkCounters.OneSecRxAggregationCount ++;
-	Payload1Size = pRxBlk->DataSize - Msdu2Size;
-	Payload2Size = Msdu2Size - LENGTH_802_3;
-
-	pData2 = pRxBlk->pData + Payload1Size + LENGTH_802_3;
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		pPacket2 = duplicate_pkt(pAd, (pData2-LENGTH_802_3), LENGTH_802_3, pData2, Payload2Size, FromWhichBSSID);
-#endif // CONFIG_STA_SUPPORT //
-
-	if (!pPacket2)
-	{
-		// release packet
-		RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
-		return;
-	}
-
-	// update payload size of 1st packet
-	pRxBlk->DataSize = Payload1Size;
-	wlan_802_11_to_802_3_packet(pAd, pRxBlk, Header802_3, FromWhichBSSID);
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pRxBlk->pRxPacket, FromWhichBSSID);
-#endif // CONFIG_STA_SUPPORT //
-
-	if (pPacket2)
-	{
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pPacket2, FromWhichBSSID);
-#endif // CONFIG_STA_SUPPORT //
-	}
-}
-
-
-#define RESET_FRAGFRAME(_fragFrame) \
-	{								\
-		_fragFrame.RxSize = 0;		\
-		_fragFrame.Sequence = 0;	\
-		_fragFrame.LastFrag = 0;	\
-		_fragFrame.Flags = 0;		\
-	}
-
-
-PNDIS_PACKET RTMPDeFragmentDataFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk)
-{
-	PHEADER_802_11	pHeader = pRxBlk->pHeader;
-	PNDIS_PACKET	pRxPacket = pRxBlk->pRxPacket;
-	UCHAR			*pData = pRxBlk->pData;
-	USHORT			DataSize = pRxBlk->DataSize;
-	PNDIS_PACKET	pRetPacket = NULL;
-	UCHAR			*pFragBuffer = NULL;
-	BOOLEAN 		bReassDone = FALSE;
-	UCHAR			HeaderRoom = 0;
-
-
-	ASSERT(pHeader);
-
-	HeaderRoom = pData - (UCHAR *)pHeader;
-
-	// Re-assemble the fragmented packets
-	if (pHeader->Frag == 0)		// Frag. Number is 0 : First frag or only one pkt
-	{
-		// the first pkt of fragment, record it.
-		if (pHeader->FC.MoreFrag)
-		{
-			ASSERT(pAd->FragFrame.pFragPacket);
-			pFragBuffer = GET_OS_PKT_DATAPTR(pAd->FragFrame.pFragPacket);
-			pAd->FragFrame.RxSize   = DataSize + HeaderRoom;
-			NdisMoveMemory(pFragBuffer,	 pHeader, pAd->FragFrame.RxSize);
-			pAd->FragFrame.Sequence = pHeader->Sequence;
-			pAd->FragFrame.LastFrag = pHeader->Frag;	   // Should be 0
-			ASSERT(pAd->FragFrame.LastFrag == 0);
-			goto done;	// end of processing this frame
-		}
-	}
-	else	//Middle & End of fragment
-	{
-		if ((pHeader->Sequence != pAd->FragFrame.Sequence) ||
-			(pHeader->Frag != (pAd->FragFrame.LastFrag + 1)))
-		{
-			// Fragment is not the same sequence or out of fragment number order
-			// Reset Fragment control blk
-			RESET_FRAGFRAME(pAd->FragFrame);
-			DBGPRINT(RT_DEBUG_ERROR, ("Fragment is not the same sequence or out of fragment number order.\n"));
-			goto done; // give up this frame
-		}
-		else if ((pAd->FragFrame.RxSize + DataSize) > MAX_FRAME_SIZE)
-		{
-			// Fragment frame is too large, it exeeds the maximum frame size.
-			// Reset Fragment control blk
-			RESET_FRAGFRAME(pAd->FragFrame);
-			DBGPRINT(RT_DEBUG_ERROR, ("Fragment frame is too large, it exeeds the maximum frame size.\n"));
-			goto done; // give up this frame
-		}
-
-        //
-		// Broadcom AP(BCM94704AGR) will send out LLC in fragment's packet, LLC only can accpet at first fragment.
-		// In this case, we will dropt it.
-		//
-		if (NdisEqualMemory(pData, SNAP_802_1H, sizeof(SNAP_802_1H)))
-		{
-			DBGPRINT(RT_DEBUG_ERROR, ("Find another LLC at Middle or End fragment(SN=%d, Frag=%d)\n", pHeader->Sequence, pHeader->Frag));
-			goto done; // give up this frame
-		}
-
-		pFragBuffer = GET_OS_PKT_DATAPTR(pAd->FragFrame.pFragPacket);
-
-		// concatenate this fragment into the re-assembly buffer
-		NdisMoveMemory((pFragBuffer + pAd->FragFrame.RxSize), pData, DataSize);
-		pAd->FragFrame.RxSize  += DataSize;
-		pAd->FragFrame.LastFrag = pHeader->Frag;	   // Update fragment number
-
-		// Last fragment
-		if (pHeader->FC.MoreFrag == FALSE)
-		{
-			bReassDone = TRUE;
-		}
-	}
-
-done:
-	// always release rx fragmented packet
-	RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
-
-	// return defragmented packet if packet is reassembled completely
-	// otherwise return NULL
-	if (bReassDone)
-	{
-		PNDIS_PACKET pNewFragPacket;
-
-		// allocate a new packet buffer for fragment
-		pNewFragPacket = RTMP_AllocateFragPacketBuffer(pAd, RX_BUFFER_NORMSIZE);
-		if (pNewFragPacket)
-		{
-			// update RxBlk
-			pRetPacket = pAd->FragFrame.pFragPacket;
-			pAd->FragFrame.pFragPacket = pNewFragPacket;
-			pRxBlk->pHeader = (PHEADER_802_11) GET_OS_PKT_DATAPTR(pRetPacket);
-			pRxBlk->pData = (UCHAR *)pRxBlk->pHeader + HeaderRoom;
-			pRxBlk->DataSize = pAd->FragFrame.RxSize - HeaderRoom;
-			pRxBlk->pRxPacket = pRetPacket;
-		}
-		else
-		{
-			RESET_FRAGFRAME(pAd->FragFrame);
-		}
-	}
-
-	return pRetPacket;
-}
-
-
-VOID Indicate_AMSDU_Packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID)
-{
-	UINT			nMSDU;
-
-	update_os_packet_info(pAd, pRxBlk, FromWhichBSSID);
-	RTMP_SET_PACKET_IF(pRxBlk->pRxPacket, FromWhichBSSID);
-	nMSDU = deaggregate_AMSDU_announce(pAd, pRxBlk->pRxPacket, pRxBlk->pData, pRxBlk->DataSize);
-}
-
-VOID Indicate_EAPOL_Packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID)
-{
-	MAC_TABLE_ENTRY *pEntry = NULL;
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		pEntry = &pAd->MacTab.Content[BSSID_WCID];
-		STARxEAPOLFrameIndicate(pAd, pEntry, pRxBlk, FromWhichBSSID);
-		return;
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	if (pEntry == NULL)
-	{
-		DBGPRINT(RT_DEBUG_WARN, ("Indicate_EAPOL_Packet: drop and release the invalid packet.\n"));
-		// release packet
-		RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
-		return;
-	}
-}
-
-#define BCN_TBTT_OFFSET		64	//defer 64 us
-VOID ReSyncBeaconTime(
-	IN  PRTMP_ADAPTER   pAd)
-{
-
-	UINT32  Offset;
-
-
-	Offset = (pAd->TbttTickCount) % (BCN_TBTT_OFFSET);
-
-	pAd->TbttTickCount++;
-
-	//
-	// The updated BeaconInterval Value will affect Beacon Interval after two TBTT
-	// beacasue the original BeaconInterval had been loaded into next TBTT_TIMER
-	//
-	if (Offset == (BCN_TBTT_OFFSET-2))
-	{
-		BCN_TIME_CFG_STRUC csr;
-		RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr.word);
-		csr.field.BeaconInterval = (pAd->CommonCfg.BeaconPeriod << 4) - 1 ;	// ASIC register in units of 1/16 TU = 64us
-		RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr.word);
-	}
-	else
-	{
-		if (Offset == (BCN_TBTT_OFFSET-1))
-		{
-			BCN_TIME_CFG_STRUC csr;
-
-			RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr.word);
-			csr.field.BeaconInterval = (pAd->CommonCfg.BeaconPeriod) << 4; // ASIC register in units of 1/16 TU
-			RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr.word);
-		}
-	}
-}
-
+#include "../../rt2860/common/cmm_data.c"
diff --git a/drivers/staging/rt2870/common/cmm_data_2870.c b/drivers/staging/rt2870/common/cmm_data_2870.c
index f77000f336a..d6fc056f81d 100644
--- a/drivers/staging/rt2870/common/cmm_data_2870.c
+++ b/drivers/staging/rt2870/common/cmm_data_2870.c
@@ -189,9 +189,6 @@ USHORT	RtmpUSB_WriteFragTxResource(
 	}
 
 	NdisMoveMemory(pWirelessPacket, pTxBlk->HeaderBuf, TXINFO_SIZE + TXWI_SIZE + hwHdrLen);
-#ifdef RT_BIG_ENDIAN
-	RTMPFrameEndianChange(pAd, (PUCHAR)(pWirelessPacket + TXINFO_SIZE + TXWI_SIZE), DIR_WRITE, FALSE);
-#endif // RT_BIG_ENDIAN //
 	pWirelessPacket += (TXINFO_SIZE + TXWI_SIZE + hwHdrLen);
 	pHTTXContext->CurWriteRealPos += (TXINFO_SIZE + TXWI_SIZE + hwHdrLen);
 
@@ -295,6 +292,7 @@ USHORT RtmpUSB_WriteSingleTxResource(
 		pTxBlk->Priv = (TXINFO_SIZE + USBDMApktLen);
 
 		// For TxInfo, the length of USBDMApktLen = TXWI_SIZE + 802.11 header + payload
+		//PS packets use HCCA queue when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA)
 		RTMPWriteTxInfo(pAd, pTxInfo, (USHORT)(USBDMApktLen), FALSE, FIFO_EDCA, FALSE /*NextValid*/,  FALSE);
 
 		if ((pHTTXContext->CurWritePosition + 3906 + pTxBlk->Priv) > MAX_TXBULK_LIMIT)
@@ -303,9 +301,6 @@ USHORT RtmpUSB_WriteSingleTxResource(
 			bTxQLastRound = TRUE;
 		}
 		NdisMoveMemory(pWirelessPacket, pTxBlk->HeaderBuf, TXINFO_SIZE + TXWI_SIZE + hwHdrLen);
-#ifdef RT_BIG_ENDIAN
-		RTMPFrameEndianChange(pAd, (PUCHAR)(pWirelessPacket + TXINFO_SIZE + TXWI_SIZE), DIR_WRITE, FALSE);
-#endif // RT_BIG_ENDIAN //
 		pWirelessPacket += (TXINFO_SIZE + TXWI_SIZE + hwHdrLen);
 
 		// We unlock it here to prevent the first 8 bytes maybe over-writed issue.
@@ -417,9 +412,6 @@ USHORT RtmpUSB_WriteMultiTxResource(
 
 			// Copy it.
 			NdisMoveMemory(pWirelessPacket, pTxBlk->HeaderBuf, pTxBlk->Priv);
-#ifdef RT_BIG_ENDIAN
-			RTMPFrameEndianChange(pAd, (PUCHAR)(pWirelessPacket+ TXINFO_SIZE + TXWI_SIZE), DIR_WRITE, FALSE);
-#endif // RT_BIG_ENDIAN //
 			pHTTXContext->CurWriteRealPos += pTxBlk->Priv;
 			pWirelessPacket += pTxBlk->Priv;
 		}
@@ -687,14 +679,7 @@ VOID RtmpUSBNullFrameKickOut(
 		pTxWI = (PTXWI_STRUC)&pWirelessPkt[TXINFO_SIZE];
 		RTMPWriteTxWI(pAd, pTxWI,  FALSE, FALSE, FALSE, FALSE, TRUE, FALSE, 0, BSSID_WCID, (sizeof(HEADER_802_11)),
 			0, 0, (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_HTTXOP, FALSE, &pAd->CommonCfg.MlmeTransmit);
-#ifdef RT_BIG_ENDIAN
-		RTMPWIEndianChange((PUCHAR)pTxWI, TYPE_TXWI);
-#endif // RT_BIG_ENDIAN //
-
 		RTMPMoveMemory(&pWirelessPkt[TXWI_SIZE+TXINFO_SIZE], &pAd->NullFrame, sizeof(HEADER_802_11));
-#ifdef RT_BIG_ENDIAN
-		RTMPFrameEndianChange(pAd, (PUCHAR)&pWirelessPkt[TXINFO_SIZE + TXWI_SIZE], DIR_WRITE, FALSE);
-#endif // RT_BIG_ENDIAN //
 		pAd->NullContext.BulkOutSize =  TXINFO_SIZE + TXWI_SIZE + sizeof(pAd->NullFrame) + 4;
 
 		// Fill out frame length information for global Bulk out arbitor
@@ -708,7 +693,6 @@ VOID RtmpUSBNullFrameKickOut(
 
 }
 
-#ifdef CONFIG_STA_SUPPORT
 /*
 	========================================================================
 
@@ -826,7 +810,12 @@ VOID RT28xxUsbStaAsicForceWakeup(
 	AutoWakeupCfg.word = 0;
 	RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
 
+#ifndef RT30xx
 	AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x00);
+#endif
+#ifdef RT30xx
+	AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x02);
+#endif
 
 	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
 }
@@ -854,7 +843,6 @@ VOID RT28xxUsbStaAsicSleepThenAutoWakeup(
 	OPSTATUS_SET_FLAG(pAd, fOP_STATUS_DOZE);
 
 }
-#endif // CONFIG_STA_SUPPORT //
 
 VOID RT28xxUsbMlmeRadioOn(
 	IN PRTMP_ADAPTER pAd)
@@ -864,25 +852,30 @@ VOID RT28xxUsbMlmeRadioOn(
 	if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))
 		return;
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
+#ifndef RT30xx
     	AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x00);
+#endif
+#ifdef RT30xx
+    	AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x02);
+#endif
 		RTMPusecDelay(10000);
-	}
-#endif // CONFIG_STA_SUPPORT //
+
 	NICResetFromError(pAd);
 
 	// Enable Tx/Rx
 	RTMPEnableRxTx(pAd);
 
+#ifdef RT3070
+	if (IS_RT3071(pAd))
+	{
+		RT30xxReverseRFSleepModeSetup(pAd);
+	}
+#endif // RT3070 //
+
 	// Clear Radio off flag
 	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		RTUSBBulkReceive(pAd);
-#endif // CONFIG_STA_SUPPORT //
+	RTUSBBulkReceive(pAd);
 
 	// Set LED
 	RTMPSetLED(pAd, LED_RADIO_ON);
@@ -904,8 +897,6 @@ VOID RT28xxUsbMlmeRadioOFF(
 	// Set Radio off flag
 	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Link down first if any association exists
 		if (INFRA_ON(pAd) || ADHOC_ON(pAd))
@@ -916,9 +907,8 @@ VOID RT28xxUsbMlmeRadioOFF(
 		// Clean up old bss table
 		BssTableInit(&pAd->ScanTab);
 	}
-#endif // CONFIG_STA_SUPPORT //
-
 
+#ifndef RT30xx
 	// Disable MAC Tx/Rx
 	RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
 	Value &= (0xfffffff3);
@@ -932,6 +922,7 @@ VOID RT28xxUsbMlmeRadioOFF(
 
 	// TX_PIN_CFG => value = 0x0 => 20mA
 	RTMP_IO_WRITE32(pAd, TX_PIN_CFG, 0);
+#endif
 
 	if (pAd->CommonCfg.BBPCurrentBW == BW_40)
 	{
@@ -944,6 +935,14 @@ VOID RT28xxUsbMlmeRadioOFF(
 		AsicTurnOffRFClk(pAd, pAd->CommonCfg.Channel);
 	}
 
+#ifdef RT30xx
+	// Disable Tx/Rx DMA
+	RTUSBReadMACRegister(pAd, WPDMA_GLO_CFG, &GloCfg.word);	   // disable DMA
+	GloCfg.field.EnableTxDMA = 0;
+	GloCfg.field.EnableRxDMA = 0;
+	RTUSBWriteMACRegister(pAd, WPDMA_GLO_CFG, GloCfg.word);	   // abort all TX rings
+#endif
+
 	// Waiting for DMA idle
 	i = 0;
 	do
@@ -955,9 +954,13 @@ VOID RT28xxUsbMlmeRadioOFF(
 		RTMPusecDelay(1000);
 	}while (i++ < 100);
 
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x02);
-#endif // CONFIG_STA_SUPPORT //
+#ifdef RT30xx
+	// Disable MAC Tx/Rx
+	RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
+	Value &= (0xfffffff3);
+	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
+#endif
+
+	AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x02);
 }
 
diff --git a/drivers/staging/rt2870/common/cmm_info.c b/drivers/staging/rt2870/common/cmm_info.c
index 47a1b1a73f0..226187ee556 100644
--- a/drivers/staging/rt2870/common/cmm_info.c
+++ b/drivers/staging/rt2870/common/cmm_info.c
@@ -1,3712 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-*/
-
-#include "../rt_config.h"
-
-INT	Show_SSID_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_WirelessMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_TxBurst_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_TxPreamble_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_TxPower_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_Channel_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_BGProtection_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_RTSThreshold_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_FragThreshold_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-#ifdef DOT11_N_SUPPORT
-INT	Show_HtBw_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_HtMcs_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_HtGi_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_HtOpMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_HtExtcha_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_HtMpduDensity_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_HtBaWinSize_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_HtRdg_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_HtAmsdu_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_HtAutoBa_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-#endif // DOT11_N_SUPPORT //
-
-INT	Show_CountryRegion_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_CountryRegionABand_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_CountryCode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-#ifdef AGGREGATION_SUPPORT
-INT	Show_PktAggregate_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-#endif // AGGREGATION_SUPPORT //
-
-#ifdef WMM_SUPPORT
-INT	Show_WmmCapable_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-#endif // WMM_SUPPORT //
-
-INT	Show_IEEE80211H_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-#ifdef CONFIG_STA_SUPPORT
-INT	Show_NetworkType_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-#endif // CONFIG_STA_SUPPORT //
-
-INT	Show_AuthMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_EncrypType_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_DefaultKeyID_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_Key1_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_Key2_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_Key3_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_Key4_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_WPAPSK_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-static struct {
-	CHAR *name;
-	INT (*show_proc)(PRTMP_ADAPTER pAdapter, PUCHAR arg);
-} *PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC, RTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC[] = {
-	{"SSID",					Show_SSID_Proc},
-	{"WirelessMode",			Show_WirelessMode_Proc},
-	{"TxBurst",					Show_TxBurst_Proc},
-	{"TxPreamble",				Show_TxPreamble_Proc},
-	{"TxPower",					Show_TxPower_Proc},
-	{"Channel",					Show_Channel_Proc},
-	{"BGProtection",			Show_BGProtection_Proc},
-	{"RTSThreshold",			Show_RTSThreshold_Proc},
-	{"FragThreshold",			Show_FragThreshold_Proc},
-#ifdef DOT11_N_SUPPORT
-	{"HtBw",					Show_HtBw_Proc},
-	{"HtMcs",					Show_HtMcs_Proc},
-	{"HtGi",					Show_HtGi_Proc},
-	{"HtOpMode",				Show_HtOpMode_Proc},
-	{"HtExtcha",				Show_HtExtcha_Proc},
-	{"HtMpduDensity",			Show_HtMpduDensity_Proc},
-	{"HtBaWinSize",		        Show_HtBaWinSize_Proc},
-	{"HtRdg",		        	Show_HtRdg_Proc},
-	{"HtAmsdu",		        	Show_HtAmsdu_Proc},
-	{"HtAutoBa",		        Show_HtAutoBa_Proc},
-#endif // DOT11_N_SUPPORT //
-	{"CountryRegion",			Show_CountryRegion_Proc},
-	{"CountryRegionABand",		Show_CountryRegionABand_Proc},
-	{"CountryCode",				Show_CountryCode_Proc},
-#ifdef AGGREGATION_SUPPORT
-	{"PktAggregate",			Show_PktAggregate_Proc},
-#endif
-
-#ifdef WMM_SUPPORT
-	{"WmmCapable",				Show_WmmCapable_Proc},
-#endif
-	{"IEEE80211H",				Show_IEEE80211H_Proc},
-#ifdef CONFIG_STA_SUPPORT
-    {"NetworkType",				Show_NetworkType_Proc},
-#endif // CONFIG_STA_SUPPORT //
-	{"AuthMode",				Show_AuthMode_Proc},
-	{"EncrypType",				Show_EncrypType_Proc},
-	{"DefaultKeyID",			Show_DefaultKeyID_Proc},
-	{"Key1",					Show_Key1_Proc},
-	{"Key2",					Show_Key2_Proc},
-	{"Key3",					Show_Key3_Proc},
-	{"Key4",					Show_Key4_Proc},
-	{"WPAPSK",					Show_WPAPSK_Proc},
-	{NULL, NULL}
-};
-
-/*
-    ==========================================================================
-    Description:
-        Get Driver version.
-
-    Return:
-    ==========================================================================
-*/
-INT Set_DriverVersion_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		DBGPRINT(RT_DEBUG_TRACE, ("Driver version-%s\n", STA_DRIVER_VERSION));
-#endif // CONFIG_STA_SUPPORT //
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Country Region.
-        This command will not work, if the field of CountryRegion in eeprom is programmed.
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_CountryRegion_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG region;
-
-	region = simple_strtol(arg, 0, 10);
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-	return -EOPNOTSUPP;
-#endif // EXT_BUILD_CHANNEL_LIST //
-
-	// Country can be set only when EEPROM not programmed
-	if (pAd->CommonCfg.CountryRegion & 0x80)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("Set_CountryRegion_Proc::parameter of CountryRegion in eeprom is programmed \n"));
-		return FALSE;
-	}
-
-	if((region >= 0) && (region <= REGION_MAXIMUM_BG_BAND))
-	{
-		pAd->CommonCfg.CountryRegion = (UCHAR) region;
-	}
-	else if (region == REGION_31_BG_BAND)
-	{
-		pAd->CommonCfg.CountryRegion = (UCHAR) region;
-	}
-	else
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("Set_CountryRegion_Proc::parameters out of range\n"));
-		return FALSE;
-	}
-
-	// if set country region, driver needs to be reset
-	BuildChannelList(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_CountryRegion_Proc::(CountryRegion=%d)\n", pAd->CommonCfg.CountryRegion));
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Country Region for A band.
-        This command will not work, if the field of CountryRegion in eeprom is programmed.
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_CountryRegionABand_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG region;
-
-	region = simple_strtol(arg, 0, 10);
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-	return -EOPNOTSUPP;
-#endif // EXT_BUILD_CHANNEL_LIST //
-
-	// Country can be set only when EEPROM not programmed
-	if (pAd->CommonCfg.CountryRegionForABand & 0x80)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("Set_CountryRegionABand_Proc::parameter of CountryRegion in eeprom is programmed \n"));
-		return FALSE;
-	}
-
-	if((region >= 0) && (region <= REGION_MAXIMUM_A_BAND))
-	{
-		pAd->CommonCfg.CountryRegionForABand = (UCHAR) region;
-	}
-	else
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("Set_CountryRegionABand_Proc::parameters out of range\n"));
-		return FALSE;
-	}
-
-	// if set country region, driver needs to be reset
-	BuildChannelList(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_CountryRegionABand_Proc::(CountryRegion=%d)\n", pAd->CommonCfg.CountryRegionForABand));
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Wireless Mode
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_WirelessMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG	WirelessMode;
-	INT		success = TRUE;
-
-	WirelessMode = simple_strtol(arg, 0, 10);
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		INT MaxPhyMode = PHY_11G;
-
-#ifdef DOT11_N_SUPPORT
-		MaxPhyMode = PHY_11N_5G;
-#endif // DOT11_N_SUPPORT //
-
-		if (WirelessMode <= MaxPhyMode)
-		{
-			RTMPSetPhyMode(pAd, WirelessMode);
-#ifdef DOT11_N_SUPPORT
-			if (WirelessMode >= PHY_11ABGN_MIXED)
-			{
-				pAd->CommonCfg.BACapability.field.AutoBA = TRUE;
-				pAd->CommonCfg.REGBACapability.field.AutoBA = TRUE;
-			}
-			else
-			{
-				pAd->CommonCfg.BACapability.field.AutoBA = FALSE;
-				pAd->CommonCfg.REGBACapability.field.AutoBA = FALSE;
-			}
-#endif // DOT11_N_SUPPORT //
-			// Set AdhocMode rates
-			if (pAd->StaCfg.BssType == BSS_ADHOC)
-			{
-				MlmeUpdateTxRates(pAd, FALSE, 0);
-				MakeIbssBeacon(pAd);           // re-build BEACON frame
-				AsicEnableIbssSync(pAd);       // copy to on-chip memory
-			}
-		}
-		else
-		{
-			success = FALSE;
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	// it is needed to set SSID to take effect
-	if (success == TRUE)
-	{
-#ifdef DOT11_N_SUPPORT
-		SetCommonHT(pAd);
-#endif // DOT11_N_SUPPORT //
-		DBGPRINT(RT_DEBUG_TRACE, ("Set_WirelessMode_Proc::(=%ld)\n", WirelessMode));
-	}
-	else
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("Set_WirelessMode_Proc::parameters out of range\n"));
-	}
-
-	return success;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Channel
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_Channel_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
- 	INT		success = TRUE;
-	UCHAR	Channel;
-
-	Channel = (UCHAR) simple_strtol(arg, 0, 10);
-
-	// check if this channel is valid
-	if (ChannelSanity(pAd, Channel) == TRUE)
-	{
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			pAd->CommonCfg.Channel = Channel;
-
-			if (MONITOR_ON(pAd))
-			{
-#ifdef DOT11_N_SUPPORT
-				N_ChannelCheck(pAd);
-				if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED &&
-					pAd->CommonCfg.RegTransmitSetting.field.BW == BW_40)
-				{
-					N_SetCenCh(pAd);
-					AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
-					AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
-					DBGPRINT(RT_DEBUG_TRACE, ("BW_40, control_channel(%d), CentralChannel(%d) \n",
-								pAd->CommonCfg.Channel, pAd->CommonCfg.CentralChannel));
-				}
-				else
-#endif // DOT11_N_SUPPORT //
-				{
-					AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
-					AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-					DBGPRINT(RT_DEBUG_TRACE, ("BW_20, Channel(%d)\n", pAd->CommonCfg.Channel));
-				}
-			}
-		}
-#endif // CONFIG_STA_SUPPORT //
-		success = TRUE;
-	}
-	else
-	{
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			success = FALSE;
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-
-	if (success == TRUE)
-		DBGPRINT(RT_DEBUG_TRACE, ("Set_Channel_Proc::(Channel=%d)\n", pAd->CommonCfg.Channel));
-
-	return success;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Short Slot Time Enable or Disable
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ShortSlot_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG ShortSlot;
-
-	ShortSlot = simple_strtol(arg, 0, 10);
-
-	if (ShortSlot == 1)
-		pAd->CommonCfg.bUseShortSlotTime = TRUE;
-	else if (ShortSlot == 0)
-		pAd->CommonCfg.bUseShortSlotTime = FALSE;
-	else
-		return FALSE;  //Invalid argument
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_ShortSlot_Proc::(ShortSlot=%d)\n", pAd->CommonCfg.bUseShortSlotTime));
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Tx power
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_TxPower_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG TxPower;
-	INT   success = FALSE;
-
-	TxPower = (ULONG) simple_strtol(arg, 0, 10);
-	if (TxPower <= 100)
-	{
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			pAd->CommonCfg.TxPowerDefault = TxPower;
-			pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault;
-		}
-#endif // CONFIG_STA_SUPPORT //
-		success = TRUE;
-	}
-	else
-		success = FALSE;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_TxPower_Proc::(TxPowerPercentage=%ld)\n", pAd->CommonCfg.TxPowerPercentage));
-
-	return success;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set 11B/11G Protection
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_BGProtection_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	switch (simple_strtol(arg, 0, 10))
-	{
-		case 0: //AUTO
-			pAd->CommonCfg.UseBGProtection = 0;
-			break;
-		case 1: //Always On
-			pAd->CommonCfg.UseBGProtection = 1;
-			break;
-		case 2: //Always OFF
-			pAd->CommonCfg.UseBGProtection = 2;
-			break;
-		default:  //Invalid argument
-			return FALSE;
-	}
-
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_BGProtection_Proc::(BGProtection=%ld)\n", pAd->CommonCfg.UseBGProtection));
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set TxPreamble
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_TxPreamble_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	RT_802_11_PREAMBLE	Preamble;
-
-	Preamble = simple_strtol(arg, 0, 10);
-
-
-	switch (Preamble)
-	{
-		case Rt802_11PreambleShort:
-			pAd->CommonCfg.TxPreamble = Preamble;
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				MlmeSetTxPreamble(pAd, Rt802_11PreambleShort);
-#endif // CONFIG_STA_SUPPORT //
-			break;
-		case Rt802_11PreambleLong:
-#ifdef CONFIG_STA_SUPPORT
-		case Rt802_11PreambleAuto:
-			// if user wants AUTO, initialize to LONG here, then change according to AP's
-			// capability upon association.
-#endif // CONFIG_STA_SUPPORT //
-			pAd->CommonCfg.TxPreamble = Preamble;
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				MlmeSetTxPreamble(pAd, Rt802_11PreambleLong);
-#endif // CONFIG_STA_SUPPORT //
-			break;
-		default: //Invalid argument
-			return FALSE;
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_TxPreamble_Proc::(TxPreamble=%ld)\n", pAd->CommonCfg.TxPreamble));
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set RTS Threshold
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_RTSThreshold_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	 NDIS_802_11_RTS_THRESHOLD           RtsThresh;
-
-	RtsThresh = simple_strtol(arg, 0, 10);
-
-	if((RtsThresh > 0) && (RtsThresh <= MAX_RTS_THRESHOLD))
-		pAd->CommonCfg.RtsThreshold  = (USHORT)RtsThresh;
-#ifdef CONFIG_STA_SUPPORT
-	else if (RtsThresh == 0)
-		pAd->CommonCfg.RtsThreshold = MAX_RTS_THRESHOLD;
-#endif // CONFIG_STA_SUPPORT //
-	else
-		return FALSE; //Invalid argument
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_RTSThreshold_Proc::(RTSThreshold=%d)\n", pAd->CommonCfg.RtsThreshold));
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Fragment Threshold
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_FragThreshold_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	 NDIS_802_11_FRAGMENTATION_THRESHOLD     FragThresh;
-
-	FragThresh = simple_strtol(arg, 0, 10);
-
-	if (FragThresh > MAX_FRAG_THRESHOLD || FragThresh < MIN_FRAG_THRESHOLD)
-	{
-		//Illegal FragThresh so we set it to default
-		pAd->CommonCfg.FragmentThreshold = MAX_FRAG_THRESHOLD;
-	}
-	else if (FragThresh % 2 == 1)
-	{
-		// The length of each fragment shall always be an even number of octets, except for the last fragment
-		// of an MSDU or MMPDU, which may be either an even or an odd number of octets.
-		pAd->CommonCfg.FragmentThreshold = (USHORT)(FragThresh - 1);
-	}
-	else
-	{
-		pAd->CommonCfg.FragmentThreshold = (USHORT)FragThresh;
-	}
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if (pAd->CommonCfg.FragmentThreshold == MAX_FRAG_THRESHOLD)
-			pAd->CommonCfg.bUseZeroToDisableFragment = TRUE;
-		else
-			pAd->CommonCfg.bUseZeroToDisableFragment = FALSE;
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_FragThreshold_Proc::(FragThreshold=%d)\n", pAd->CommonCfg.FragmentThreshold));
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set TxBurst
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_TxBurst_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG TxBurst;
-
-	TxBurst = simple_strtol(arg, 0, 10);
-	if (TxBurst == 1)
-		pAd->CommonCfg.bEnableTxBurst = TRUE;
-	else if (TxBurst == 0)
-		pAd->CommonCfg.bEnableTxBurst = FALSE;
-	else
-		return FALSE;  //Invalid argument
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_TxBurst_Proc::(TxBurst=%d)\n", pAd->CommonCfg.bEnableTxBurst));
-
-	return TRUE;
-}
-
-#ifdef AGGREGATION_SUPPORT
-/*
-    ==========================================================================
-    Description:
-        Set TxBurst
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_PktAggregate_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG aggre;
-
-	aggre = simple_strtol(arg, 0, 10);
-
-	if (aggre == 1)
-		pAd->CommonCfg.bAggregationCapable = TRUE;
-	else if (aggre == 0)
-		pAd->CommonCfg.bAggregationCapable = FALSE;
-	else
-		return FALSE;  //Invalid argument
-
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_PktAggregate_Proc::(AGGRE=%d)\n", pAd->CommonCfg.bAggregationCapable));
-
-	return TRUE;
-}
-#endif
-
-/*
-    ==========================================================================
-    Description:
-        Set IEEE80211H.
-        This parameter is 1 when needs radar detection, otherwise 0
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_IEEE80211H_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-    ULONG ieee80211h;
-
-	ieee80211h = simple_strtol(arg, 0, 10);
-
-	if (ieee80211h == 1)
-		pAd->CommonCfg.bIEEE80211H = TRUE;
-	else if (ieee80211h == 0)
-		pAd->CommonCfg.bIEEE80211H = FALSE;
-	else
-		return FALSE;  //Invalid argument
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_IEEE80211H_Proc::(IEEE80211H=%d)\n", pAd->CommonCfg.bIEEE80211H));
-
-	return TRUE;
-}
-
-
-#ifdef DBG
-/*
-    ==========================================================================
-    Description:
-        For Debug information
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_Debug_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	DBGPRINT(RT_DEBUG_TRACE, ("==> Set_Debug_Proc *******************\n"));
-
-    if(simple_strtol(arg, 0, 10) <= RT_DEBUG_LOUD)
-        RTDebugLevel = simple_strtol(arg, 0, 10);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<== Set_Debug_Proc(RTDebugLevel = %ld)\n", RTDebugLevel));
-
-	return TRUE;
-}
-#endif
-
-INT	Show_DescInfo_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Reset statistics counter
-
-    Arguments:
-        pAdapter            Pointer to our adapter
-        arg
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ResetStatCounter_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	//UCHAR           i;
-	//MAC_TABLE_ENTRY *pEntry;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("==>Set_ResetStatCounter_Proc\n"));
-
-	// add the most up-to-date h/w raw counters into software counters
-	NICUpdateRawCounters(pAd);
-
-	NdisZeroMemory(&pAd->WlanCounters, sizeof(COUNTER_802_11));
-	NdisZeroMemory(&pAd->Counters8023, sizeof(COUNTER_802_3));
-	NdisZeroMemory(&pAd->RalinkCounters, sizeof(COUNTER_RALINK));
-
-	// Reset HotSpot counter
-#if 0 // ToDo.
-	for (i = 0; i < MAX_LEN_OF_MAC_TABLE; i++)
-	{
-		pEntry = &pAd->MacTab.Content[i];
-
-		if ((pEntry->Valid == FALSE) || (pEntry->Sst != SST_ASSOC))
-			continue;
-
-		pEntry->HSCounter.LastDataPacketTime = 0;
-		pEntry->HSCounter.TotalRxByteCount= 0;
-		pEntry->HSCounter.TotalTxByteCount= 0;
-	}
-#endif
-
-
-	return TRUE;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Add WPA key process.
-		In Adhoc WPANONE, bPairwise = 0;  KeyIdx = 0;
-
-	Arguments:
-		pAd 					Pointer to our adapter
-		pBuf							Pointer to the where the key stored
-
-	Return Value:
-		NDIS_SUCCESS					Add key successfully
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-#if 0 // remove by AlbertY
-NDIS_STATUS RTMPWPAAddKeyProc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PVOID			pBuf)
-{
-	PNDIS_802_11_KEY	pKey;
-	ULONG				KeyIdx;
-//	NDIS_STATUS 		Status;
-//	ULONG 	offset;	// unused variable, snowpin 2006.07.13
-
-	PUCHAR		pTxMic, pRxMic;
-	BOOLEAN 	bTxKey; 		// Set the key as transmit key
-	BOOLEAN 	bPairwise;		// Indicate the key is pairwise key
-	BOOLEAN 	bKeyRSC;		// indicate the receive  SC set by KeyRSC value.
-								// Otherwise, it will set by the NIC.
-	BOOLEAN 	bAuthenticator; // indicate key is set by authenticator.
-	UCHAR		apidx = BSS0;
-
-	pKey = (PNDIS_802_11_KEY) pBuf;
-	KeyIdx = pKey->KeyIndex & 0xff;
-	// Bit 31 of Add-key, Tx Key
-	bTxKey		   = (pKey->KeyIndex & 0x80000000) ? TRUE : FALSE;
-	// Bit 30 of Add-key PairwiseKey
-	bPairwise	   = (pKey->KeyIndex & 0x40000000) ? TRUE : FALSE;
-	// Bit 29 of Add-key KeyRSC
-	bKeyRSC 	   = (pKey->KeyIndex & 0x20000000) ? TRUE : FALSE;
-	// Bit 28 of Add-key Authenticator
-	bAuthenticator = (pKey->KeyIndex & 0x10000000) ? TRUE : FALSE;
-
-	DBGPRINT(RT_DEBUG_TRACE,("RTMPWPAAddKeyProc==>pKey->KeyIndex = %x. bPairwise= %d\n", pKey->KeyIndex, bPairwise));
-	// 1. Check Group / Pairwise Key
-	if (bPairwise)	// Pairwise Key
-	{
-		// 1. KeyIdx must be 0, otherwise, return NDIS_STATUS_INVALID_DATA
-		if (KeyIdx != 0)
-			return(NDIS_STATUS_INVALID_DATA);
-
-		// 2. Check bTx, it must be true, otherwise, return NDIS_STATUS_INVALID_DATA
-		if (bTxKey == FALSE)
-			return(NDIS_STATUS_INVALID_DATA);
-
-		// 3. If BSSID is all 0xff, return NDIS_STATUS_INVALID_DATA
-		if (MAC_ADDR_EQUAL(pKey->BSSID, BROADCAST_ADDR))
-			return(NDIS_STATUS_INVALID_DATA);
-
-		// 3.1 Check Pairwise key length for TKIP key. For AES, it's always 128 bits
-		//if ((pAdapter->PortCfg.WepStatus == Ndis802_11Encryption2Enabled) && (pKey->KeyLength != LEN_TKIP_KEY))
-		if ((pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled) && (pKey->KeyLength != LEN_TKIP_KEY))
-			return(NDIS_STATUS_INVALID_DATA);
-
-		pAd->SharedKey[apidx][KeyIdx].Type = PAIRWISE_KEY;
-
-		if (pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWPA2)
-		{
-			// Send media specific event to start PMKID caching
-			RTMPIndicateWPA2Status(pAd);
-		}
-	}
-	else
-	{
-		// 1. Check BSSID, if not current BSSID or Bcast, return NDIS_STATUS_INVALID_DATA
-		if ((! MAC_ADDR_EQUAL(pKey->BSSID, BROADCAST_ADDR)) &&
-			(! MAC_ADDR_EQUAL(pKey->BSSID, pAd->ApCfg.MBSSID[apidx].Bssid)))
-			return(NDIS_STATUS_INVALID_DATA);
-
-		// 2. Check Key index for supported Group Key
-		if (KeyIdx >= GROUP_KEY_NUM)
-			return(NDIS_STATUS_INVALID_DATA);
-
-		// 3. Set as default Tx Key if bTxKey is TRUE
-		if (bTxKey == TRUE)
-			pAd->ApCfg.MBSSID[apidx].DefaultKeyId = (UCHAR) KeyIdx;
-
-		pAd->SharedKey[apidx][KeyIdx].Type = GROUP_KEY;
-	}
-
-	// 4. Select RxMic / TxMic based on Supp / Authenticator
-	if (pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWPANone)
-	{
-		// for WPA-None Tx, Rx MIC is the same
-		pTxMic = (PUCHAR) (&pKey->KeyMaterial) + 16;
-		pRxMic = pTxMic;
-	}
-	else if (bAuthenticator == TRUE)
-	{
-		pTxMic = (PUCHAR) (&pKey->KeyMaterial) + 16;
-		pRxMic = (PUCHAR) (&pKey->KeyMaterial) + 24;
-	}
-	else
-	{
-		pRxMic = (PUCHAR) (&pKey->KeyMaterial) + 16;
-		pTxMic = (PUCHAR) (&pKey->KeyMaterial) + 24;
-	}
-
-	// 6. Check RxTsc
-	if (bKeyRSC == TRUE)
-	{
-		NdisMoveMemory(pAd->SharedKey[apidx][KeyIdx].RxTsc, &pKey->KeyRSC, 6);
-		NdisMoveMemory(pAd->MacTab.Content[BSSID_WCID].PairwiseKey.RxTsc, &pKey->KeyRSC, 6);
-	}
-	else
-	{
-		NdisZeroMemory(pAd->SharedKey[apidx][KeyIdx].RxTsc, 6);
-	}
-
-	// 7. Copy information into Pairwise Key structure.
-	// pKey->KeyLength will include TxMic and RxMic, therefore, we use 16 bytes hardcoded.
-	pAd->SharedKey[apidx][KeyIdx].KeyLen = (UCHAR) pKey->KeyLength;
-	pAd->MacTab.Content[BSSID_WCID].PairwiseKey.KeyLen = (UCHAR)pKey->KeyLength;
-	NdisMoveMemory(pAd->SharedKey[BSS0][KeyIdx].Key, &pKey->KeyMaterial, 16);
-	NdisMoveMemory(pAd->MacTab.Content[BSSID_WCID].PairwiseKey.Key, &pKey->KeyMaterial, 16);
-	if (pKey->KeyLength == LEN_TKIP_KEY)
-	{
-		// Only Key lenth equal to TKIP key have these
-		NdisMoveMemory(pAd->SharedKey[apidx][KeyIdx].RxMic, pRxMic, 8);
-		NdisMoveMemory(pAd->SharedKey[apidx][KeyIdx].TxMic, pTxMic, 8);
-		NdisMoveMemory(pAd->MacTab.Content[BSSID_WCID].PairwiseKey.RxMic, pRxMic, 8);
-		NdisMoveMemory(pAd->MacTab.Content[BSSID_WCID].PairwiseKey.TxMic, pTxMic, 8);
-	}
-
-	COPY_MAC_ADDR(pAd->SharedKey[BSS0][KeyIdx].BssId, pKey->BSSID);
-
-	// Init TxTsc to one based on WiFi WPA specs
-	pAd->SharedKey[apidx][KeyIdx].TxTsc[0] = 1;
-	pAd->SharedKey[apidx][KeyIdx].TxTsc[1] = 0;
-	pAd->SharedKey[apidx][KeyIdx].TxTsc[2] = 0;
-	pAd->SharedKey[apidx][KeyIdx].TxTsc[3] = 0;
-	pAd->SharedKey[apidx][KeyIdx].TxTsc[4] = 0;
-	pAd->SharedKey[apidx][KeyIdx].TxTsc[5] = 0;
-	// 4. Init TxTsc to one based on WiFi WPA specs
-	pAd->MacTab.Content[BSSID_WCID].PairwiseKey.TxTsc[0] = 1;
-	pAd->MacTab.Content[BSSID_WCID].PairwiseKey.TxTsc[1] = 0;
-	pAd->MacTab.Content[BSSID_WCID].PairwiseKey.TxTsc[2] = 0;
-	pAd->MacTab.Content[BSSID_WCID].PairwiseKey.TxTsc[3] = 0;
-	pAd->MacTab.Content[BSSID_WCID].PairwiseKey.TxTsc[4] = 0;
-	pAd->MacTab.Content[BSSID_WCID].PairwiseKey.TxTsc[5] = 0;
-
-	if (pAd->ApCfg.MBSSID[apidx].WepStatus == Ndis802_11Encryption3Enabled)
-	{
-		pAd->SharedKey[apidx][KeyIdx].CipherAlg = CIPHER_AES;
-		pAd->MacTab.Content[BSSID_WCID].PairwiseKey.CipherAlg = CIPHER_AES;
-	}
-	else if (pAd->ApCfg.MBSSID[apidx].WepStatus == Ndis802_11Encryption2Enabled)
-	{
-		pAd->SharedKey[apidx][KeyIdx].CipherAlg = CIPHER_TKIP;
-		pAd->MacTab.Content[BSSID_WCID].PairwiseKey.CipherAlg = CIPHER_TKIP;
-	}
-	else if (pAd->ApCfg.MBSSID[apidx].WepStatus == Ndis802_11Encryption1Enabled)
-	{
-		if (pAd->SharedKey[apidx][KeyIdx].KeyLen == 5)
-		{
-			pAd->SharedKey[apidx][KeyIdx].CipherAlg = CIPHER_WEP64;
-			pAd->MacTab.Content[BSSID_WCID].PairwiseKey.CipherAlg = CIPHER_WEP64;
-		}
-		else if (pAd->SharedKey[apidx][KeyIdx].KeyLen == 13)
-		{
-			pAd->SharedKey[apidx][KeyIdx].CipherAlg = CIPHER_WEP128;
-			pAd->MacTab.Content[BSSID_WCID].PairwiseKey.CipherAlg = CIPHER_WEP128;
-		}
-		else
-		{
-			pAd->SharedKey[apidx][KeyIdx].CipherAlg = CIPHER_NONE;
-			pAd->MacTab.Content[BSSID_WCID].PairwiseKey.CipherAlg = CIPHER_NONE;
-		}
-	}
-	else
-	{
-		pAd->SharedKey[apidx][KeyIdx].CipherAlg = CIPHER_NONE;
-		pAd->MacTab.Content[BSSID_WCID].PairwiseKey.CipherAlg = CIPHER_NONE;
-	}
-
-	if ((pAd->OpMode == OPMODE_STA))  // Pairwise Key. Add BSSID to WCTable
-	{
-		pAd->MacTab.Content[BSSID_WCID].PairwiseKey.CipherAlg = pAd->SharedKey[BSS0][KeyIdx].CipherAlg;
-		pAd->MacTab.Content[BSSID_WCID].PairwiseKey.KeyLen = pAd->SharedKey[BSS0][KeyIdx].KeyLen;
-	}
-
-	if ((pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWPA2) ||
-		(pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWPA2PSK))
-	{
-		//
-		// On WPA2, Update Group Key Cipher.
-		//
-		if (!bPairwise)
-		{
-			if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled)
-				pAd->SharedKey[apidx][KeyIdx].CipherAlg = CIPHER_AES;
-			else if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption2Enabled)
-				pAd->SharedKey[apidx][KeyIdx].CipherAlg = CIPHER_TKIP;
-		}
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("pAd->SharedKey[%d][%d].CipherAlg = %d\n", apidx, KeyIdx, pAd->SharedKey[apidx][KeyIdx].CipherAlg));
-
-#if 0
-	DBGPRINT_RAW(RT_DEBUG_TRACE, ("%s Key #%d", CipherName[pAd->SharedKey[apidx][KeyIdx].CipherAlg],KeyIdx));
-	for (i = 0; i < 16; i++)
-	{
-		DBGPRINT_RAW(RT_DEBUG_TRACE, ("%02x:", pAd->SharedKey[apidx][KeyIdx].Key[i]));
-	}
-	DBGPRINT_RAW(RT_DEBUG_TRACE, ("\n	  Rx MIC Key = "));
-	for (i = 0; i < 8; i++)
-	{
-		DBGPRINT_RAW(RT_DEBUG_TRACE, ("%02x:", pAd->SharedKey[apidx][KeyIdx].RxMic[i]));
-	}
-	DBGPRINT_RAW(RT_DEBUG_TRACE, ("\n	  Tx MIC Key = "));
-	for (i = 0; i < 8; i++)
-	{
-		DBGPRINT_RAW(RT_DEBUG_TRACE, ("%02x:", pAd->SharedKey[apidx][KeyIdx].TxMic[i]));
-	}
-	DBGPRINT_RAW(RT_DEBUG_TRACE, ("\n	  RxTSC = "));
-	for (i = 0; i < 6; i++)
-	{
-		DBGPRINT_RAW(RT_DEBUG_TRACE, ("%02x:", pAd->SharedKey[apidx][KeyIdx].RxTsc[i]));
-	}
-#endif
-	DBGPRINT_RAW(RT_DEBUG_TRACE, ("\n pKey-> BSSID:%02x:%02x:%02x:%02x:%02x:%02x \n",
-		pKey->BSSID[0],pKey->BSSID[1],pKey->BSSID[2],pKey->BSSID[3],pKey->BSSID[4],pKey->BSSID[5]));
-
-	if ((bTxKey) && (pAd->OpMode == OPMODE_STA))  // Pairwise Key. Add BSSID to WCTable
-		RTMPAddBSSIDCipher(pAd, BSSID_WCID, pKey, pAd->SharedKey[BSS0][KeyIdx].CipherAlg);
-
-
-	// No matter pairwise key or what leyidx is, always has a copy at on-chip SharedKeytable.
-	AsicAddSharedKeyEntry(pAd,
-						  apidx,
-						  (UCHAR)KeyIdx,
-						  pAd->SharedKey[apidx][KeyIdx].CipherAlg,
-						  pAd->SharedKey[apidx][KeyIdx].Key,
-						  pAd->SharedKey[apidx][KeyIdx].TxMic,
-						  pAd->SharedKey[apidx][KeyIdx].RxMic);
-
-	// The WCID key specified in used at Tx. For STA, always use pairwise key.
-
-	// ad-hoc mode need to specify WAP Group key with WCID index=BSS0Mcast_WCID. Let's always set this key here.
-/*	if (bPairwise == FALSE)
-	{
-		offset = MAC_IVEIV_TABLE_BASE + (BSS0Mcast_WCID * HW_IVEIV_ENTRY_SIZE);
-		NdisZeroMemory(IVEIV, 8);
-		// 1. IV/EIV
-		// Specify key index to find shared key.
-		if ((pAd->SharedKey[BSS0][KeyIdx].CipherAlg==CIPHER_TKIP) ||
-			(pAd->SharedKey[BSS0][KeyIdx].CipherAlg==CIPHER_AES))
-		IVEIV[3] = 0x20;		// Eiv bit on. keyid always 0 for pairwise key
-		IVEIV[3] |= (KeyIdx<< 6);	// groupkey index is not 0
-		for (i=0; i<8; i++)
-		{
-			RTMP_IO_WRITE8(pAd, offset+i, IVEIV[i]);
-		}
-
-		// 2. WCID Attribute UDF:3, BSSIdx:3, Alg:3, Keytable:use share key, BSSIdx is 0
-		WCIDAttri = (pAd->SharedKey[BSS0][KeyIdx].CipherAlg<<1)|PAIRWISEKEYTABLE;
-		offset = MAC_WCID_ATTRIBUTE_BASE + (BSS0Mcast_WCID* HW_WCID_ATTRI_SIZE);
-		RTMP_IO_WRITE32(pAd, offset, WCIDAttri);
-
-	}
-
-*/
-
-   if (pAd->SharedKey[apidx][KeyIdx].Type == GROUP_KEY)
-	{
-		// 802.1x port control
-		pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-		DBGPRINT(RT_DEBUG_TRACE,("!!WPA_802_1X_PORT_SECURED!!\n"));
-
-	}
-
-	return (NDIS_STATUS_SUCCESS);
-}
-#endif
-
-BOOLEAN RTMPCheckStrPrintAble(
-    IN  CHAR *pInPutStr,
-    IN  UCHAR strLen)
-{
-    UCHAR i=0;
-
-    for (i=0; i<strLen; i++)
-    {
-        if ((pInPutStr[i] < 0x21) ||
-            (pInPutStr[i] > 0x7E))
-            return FALSE;
-    }
-
-    return TRUE;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Remove WPA Key process
-
-	Arguments:
-		pAd 					Pointer to our adapter
-		pBuf							Pointer to the where the key stored
-
-	Return Value:
-		NDIS_SUCCESS					Add key successfully
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-#ifdef CONFIG_STA_SUPPORT
-VOID    RTMPSetDesiredRates(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  LONG            Rates)
-{
-    NDIS_802_11_RATES aryRates;
-
-    memset(&aryRates, 0x00, sizeof(NDIS_802_11_RATES));
-    switch (pAdapter->CommonCfg.PhyMode)
-    {
-        case PHY_11A: // A only
-            switch (Rates)
-            {
-                case 6000000: //6M
-                    aryRates[0] = 0x0c; // 6M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_0;
-                    break;
-                case 9000000: //9M
-                    aryRates[0] = 0x12; // 9M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_1;
-                    break;
-                case 12000000: //12M
-                    aryRates[0] = 0x18; // 12M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_2;
-                    break;
-                case 18000000: //18M
-                    aryRates[0] = 0x24; // 18M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_3;
-                    break;
-                case 24000000: //24M
-                    aryRates[0] = 0x30; // 24M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_4;
-                    break;
-                case 36000000: //36M
-                    aryRates[0] = 0x48; // 36M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_5;
-                    break;
-                case 48000000: //48M
-                    aryRates[0] = 0x60; // 48M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_6;
-                    break;
-                case 54000000: //54M
-                    aryRates[0] = 0x6c; // 54M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_7;
-                    break;
-                case -1: //Auto
-                default:
-                    aryRates[0] = 0x6c; // 54Mbps
-                    aryRates[1] = 0x60; // 48Mbps
-                    aryRates[2] = 0x48; // 36Mbps
-                    aryRates[3] = 0x30; // 24Mbps
-                    aryRates[4] = 0x24; // 18M
-                    aryRates[5] = 0x18; // 12M
-                    aryRates[6] = 0x12; // 9M
-                    aryRates[7] = 0x0c; // 6M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
-                    break;
-            }
-            break;
-        case PHY_11BG_MIXED: // B/G Mixed
-        case PHY_11B: // B only
-        case PHY_11ABG_MIXED: // A/B/G Mixed
-        default:
-            switch (Rates)
-            {
-                case 1000000: //1M
-                    aryRates[0] = 0x02;
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_0;
-                    break;
-                case 2000000: //2M
-                    aryRates[0] = 0x04;
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_1;
-                    break;
-                case 5000000: //5.5M
-                    aryRates[0] = 0x0b; // 5.5M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_2;
-                    break;
-                case 11000000: //11M
-                    aryRates[0] = 0x16; // 11M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_3;
-                    break;
-                case 6000000: //6M
-                    aryRates[0] = 0x0c; // 6M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_0;
-                    break;
-                case 9000000: //9M
-                    aryRates[0] = 0x12; // 9M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_1;
-                    break;
-                case 12000000: //12M
-                    aryRates[0] = 0x18; // 12M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_2;
-                    break;
-                case 18000000: //18M
-                    aryRates[0] = 0x24; // 18M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_3;
-                    break;
-                case 24000000: //24M
-                    aryRates[0] = 0x30; // 24M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_4;
-                    break;
-                case 36000000: //36M
-                    aryRates[0] = 0x48; // 36M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_5;
-                    break;
-                case 48000000: //48M
-                    aryRates[0] = 0x60; // 48M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_6;
-                    break;
-                case 54000000: //54M
-                    aryRates[0] = 0x6c; // 54M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_7;
-                    break;
-                case -1: //Auto
-                default:
-                    if (pAdapter->CommonCfg.PhyMode == PHY_11B)
-                    { //B Only
-                        aryRates[0] = 0x16; // 11Mbps
-                        aryRates[1] = 0x0b; // 5.5Mbps
-                        aryRates[2] = 0x04; // 2Mbps
-                        aryRates[3] = 0x02; // 1Mbps
-                    }
-                    else
-                    { //(B/G) Mixed or (A/B/G) Mixed
-                        aryRates[0] = 0x6c; // 54Mbps
-                        aryRates[1] = 0x60; // 48Mbps
-                        aryRates[2] = 0x48; // 36Mbps
-                        aryRates[3] = 0x30; // 24Mbps
-                        aryRates[4] = 0x16; // 11Mbps
-                        aryRates[5] = 0x0b; // 5.5Mbps
-                        aryRates[6] = 0x04; // 2Mbps
-                        aryRates[7] = 0x02; // 1Mbps
-                    }
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
-                    break;
-            }
-            break;
-    }
-
-    NdisZeroMemory(pAdapter->CommonCfg.DesireRate, MAX_LEN_OF_SUPPORTED_RATES);
-    NdisMoveMemory(pAdapter->CommonCfg.DesireRate, &aryRates, sizeof(NDIS_802_11_RATES));
-    DBGPRINT(RT_DEBUG_TRACE, (" RTMPSetDesiredRates (%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x)\n",
-        pAdapter->CommonCfg.DesireRate[0],pAdapter->CommonCfg.DesireRate[1],
-        pAdapter->CommonCfg.DesireRate[2],pAdapter->CommonCfg.DesireRate[3],
-        pAdapter->CommonCfg.DesireRate[4],pAdapter->CommonCfg.DesireRate[5],
-        pAdapter->CommonCfg.DesireRate[6],pAdapter->CommonCfg.DesireRate[7] ));
-    // Changing DesiredRate may affect the MAX TX rate we used to TX frames out
-    MlmeUpdateTxRates(pAdapter, FALSE, 0);
-}
-
-NDIS_STATUS RTMPWPARemoveKeyProc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PVOID			pBuf)
-{
-	PNDIS_802_11_REMOVE_KEY pKey;
-	ULONG					KeyIdx;
-	NDIS_STATUS 			Status = NDIS_STATUS_FAILURE;
-	BOOLEAN 	bTxKey; 		// Set the key as transmit key
-	BOOLEAN 	bPairwise;		// Indicate the key is pairwise key
-	BOOLEAN 	bKeyRSC;		// indicate the receive  SC set by KeyRSC value.
-								// Otherwise, it will set by the NIC.
-	BOOLEAN 	bAuthenticator; // indicate key is set by authenticator.
-	INT 		i;
-
-	DBGPRINT(RT_DEBUG_TRACE,("---> RTMPWPARemoveKeyProc\n"));
-
-	pKey = (PNDIS_802_11_REMOVE_KEY) pBuf;
-	KeyIdx = pKey->KeyIndex & 0xff;
-	// Bit 31 of Add-key, Tx Key
-	bTxKey		   = (pKey->KeyIndex & 0x80000000) ? TRUE : FALSE;
-	// Bit 30 of Add-key PairwiseKey
-	bPairwise	   = (pKey->KeyIndex & 0x40000000) ? TRUE : FALSE;
-	// Bit 29 of Add-key KeyRSC
-	bKeyRSC 	   = (pKey->KeyIndex & 0x20000000) ? TRUE : FALSE;
-	// Bit 28 of Add-key Authenticator
-	bAuthenticator = (pKey->KeyIndex & 0x10000000) ? TRUE : FALSE;
-
-	// 1. If bTx is TRUE, return failure information
-	if (bTxKey == TRUE)
-		return(NDIS_STATUS_INVALID_DATA);
-
-	// 2. Check Pairwise Key
-	if (bPairwise)
-	{
-		// a. If BSSID is broadcast, remove all pairwise keys.
-		// b. If not broadcast, remove the pairwise specified by BSSID
-		for (i = 0; i < SHARE_KEY_NUM; i++)
-		{
-			if (MAC_ADDR_EQUAL(pAd->SharedKey[BSS0][i].BssId, pKey->BSSID))
-			{
-				DBGPRINT(RT_DEBUG_TRACE,("RTMPWPARemoveKeyProc(KeyIdx=%d)\n", i));
-				pAd->SharedKey[BSS0][i].KeyLen = 0;
-				pAd->SharedKey[BSS0][i].CipherAlg = CIPHER_NONE;
-				AsicRemoveSharedKeyEntry(pAd, BSS0, (UCHAR)i);
-				Status = NDIS_STATUS_SUCCESS;
-				break;
-			}
-		}
-	}
-	// 3. Group Key
-	else
-	{
-		// a. If BSSID is broadcast, remove all group keys indexed
-		// b. If BSSID matched, delete the group key indexed.
-		DBGPRINT(RT_DEBUG_TRACE,("RTMPWPARemoveKeyProc(KeyIdx=%ld)\n", KeyIdx));
-		pAd->SharedKey[BSS0][KeyIdx].KeyLen = 0;
-		pAd->SharedKey[BSS0][KeyIdx].CipherAlg = CIPHER_NONE;
-		AsicRemoveSharedKeyEntry(pAd, BSS0, (UCHAR)KeyIdx);
-		Status = NDIS_STATUS_SUCCESS;
-	}
-
-	return (Status);
-}
-#endif // CONFIG_STA_SUPPORT //
-
-
-#ifdef CONFIG_STA_SUPPORT
-/*
-	========================================================================
-
-	Routine Description:
-		Remove All WPA Keys
-
-	Arguments:
-		pAd 					Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPWPARemoveAllKeys(
-	IN	PRTMP_ADAPTER	pAd)
-{
-
-	UCHAR 	i;
-
-	DBGPRINT(RT_DEBUG_TRACE,("RTMPWPARemoveAllKeys(AuthMode=%d, WepStatus=%d)\n", pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus));
-
-	// For WEP/CKIP, there is no need to remove it, since WinXP won't set it again after
-	// Link up. And it will be replaced if user changed it.
-	if (pAd->StaCfg.AuthMode < Ndis802_11AuthModeWPA)
-		return;
-
-	// For WPA-None, there is no need to remove it, since WinXP won't set it again after
-	// Link up. And it will be replaced if user changed it.
-	if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
-		return;
-
-	// set BSSID wcid entry of the Pair-wise Key table as no-security mode
-	AsicRemovePairwiseKeyEntry(pAd, BSS0, BSSID_WCID);
-
-	// set all shared key mode as no-security.
-	for (i = 0; i < SHARE_KEY_NUM; i++)
-    {
-		DBGPRINT(RT_DEBUG_TRACE,("remove %s key #%d\n", CipherName[pAd->SharedKey[BSS0][i].CipherAlg], i));
-		NdisZeroMemory(&pAd->SharedKey[BSS0][i], sizeof(CIPHER_KEY));
-
-		AsicRemoveSharedKeyEntry(pAd, BSS0, i);
-	}
-
-}
-#endif // CONFIG_STA_SUPPORT //
-
-/*
-	========================================================================
-	Routine Description:
-		Change NIC PHY mode. Re-association may be necessary. possible settings
-		include - PHY_11B, PHY_11BG_MIXED, PHY_11A, and PHY_11ABG_MIXED
-
-	Arguments:
-		pAd - Pointer to our adapter
-		phymode  -
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	========================================================================
-*/
-VOID	RTMPSetPhyMode(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	ULONG phymode)
-{
-	INT i;
-	// the selected phymode must be supported by the RF IC encoded in E2PROM
-
-	// if no change, do nothing
-	/* bug fix
-	if (pAd->CommonCfg.PhyMode == phymode)
-		return;
-    */
-	pAd->CommonCfg.PhyMode = (UCHAR)phymode;
-
-	DBGPRINT(RT_DEBUG_TRACE,("RTMPSetPhyMode : PhyMode=%d, channel=%d \n", pAd->CommonCfg.PhyMode, pAd->CommonCfg.Channel));
-#ifdef EXT_BUILD_CHANNEL_LIST
-	BuildChannelListEx(pAd);
-#else
-	BuildChannelList(pAd);
-#endif // EXT_BUILD_CHANNEL_LIST //
-
-	// sanity check user setting
-	for (i = 0; i < pAd->ChannelListNum; i++)
-	{
-		if (pAd->CommonCfg.Channel == pAd->ChannelList[i].Channel)
-			break;
-	}
-
-	if (i == pAd->ChannelListNum)
-	{
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			pAd->CommonCfg.Channel = FirstChannel(pAd);
-#endif // CONFIG_STA_SUPPORT //
-		DBGPRINT(RT_DEBUG_ERROR, ("RTMPSetPhyMode: channel is out of range, use first channel=%d \n", pAd->CommonCfg.Channel));
-	}
-
-	NdisZeroMemory(pAd->CommonCfg.SupRate, MAX_LEN_OF_SUPPORTED_RATES);
-	NdisZeroMemory(pAd->CommonCfg.ExtRate, MAX_LEN_OF_SUPPORTED_RATES);
-	NdisZeroMemory(pAd->CommonCfg.DesireRate, MAX_LEN_OF_SUPPORTED_RATES);
-	switch (phymode) {
-		case PHY_11B:
-			pAd->CommonCfg.SupRate[0]  = 0x82;	  // 1 mbps, in units of 0.5 Mbps, basic rate
-			pAd->CommonCfg.SupRate[1]  = 0x84;	  // 2 mbps, in units of 0.5 Mbps, basic rate
-			pAd->CommonCfg.SupRate[2]  = 0x8B;	  // 5.5 mbps, in units of 0.5 Mbps, basic rate
-			pAd->CommonCfg.SupRate[3]  = 0x96;	  // 11 mbps, in units of 0.5 Mbps, basic rate
-			pAd->CommonCfg.SupRateLen  = 4;
-			pAd->CommonCfg.ExtRateLen  = 0;
-			pAd->CommonCfg.DesireRate[0]  = 2;	   // 1 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[1]  = 4;	   // 2 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[2]  = 11;    // 5.5 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[3]  = 22;    // 11 mbps, in units of 0.5 Mbps
-			//pAd->CommonCfg.HTPhyMode.field.MODE = MODE_CCK; // This MODE is only FYI. not use
-			break;
-
-		case PHY_11G:
-		case PHY_11BG_MIXED:
-		case PHY_11ABG_MIXED:
-#ifdef DOT11_N_SUPPORT
-		case PHY_11N_2_4G:
-		case PHY_11ABGN_MIXED:
-		case PHY_11BGN_MIXED:
-		case PHY_11GN_MIXED:
-#endif // DOT11_N_SUPPORT //
-			pAd->CommonCfg.SupRate[0]  = 0x82;	  // 1 mbps, in units of 0.5 Mbps, basic rate
-			pAd->CommonCfg.SupRate[1]  = 0x84;	  // 2 mbps, in units of 0.5 Mbps, basic rate
-			pAd->CommonCfg.SupRate[2]  = 0x8B;	  // 5.5 mbps, in units of 0.5 Mbps, basic rate
-			pAd->CommonCfg.SupRate[3]  = 0x96;	  // 11 mbps, in units of 0.5 Mbps, basic rate
-			pAd->CommonCfg.SupRate[4]  = 0x12;	  // 9 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.SupRate[5]  = 0x24;	  // 18 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.SupRate[6]  = 0x48;	  // 36 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.SupRate[7]  = 0x6c;	  // 54 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.SupRateLen  = 8;
-			pAd->CommonCfg.ExtRate[0]  = 0x0C;	  // 6 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.ExtRate[1]  = 0x18;	  // 12 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.ExtRate[2]  = 0x30;	  // 24 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.ExtRate[3]  = 0x60;	  // 48 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.ExtRateLen  = 4;
-			pAd->CommonCfg.DesireRate[0]  = 2;	   // 1 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[1]  = 4;	   // 2 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[2]  = 11;    // 5.5 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[3]  = 22;    // 11 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[4]  = 12;    // 6 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[5]  = 18;    // 9 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[6]  = 24;    // 12 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[7]  = 36;    // 18 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[8]  = 48;    // 24 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[9]  = 72;    // 36 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[10] = 96;    // 48 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[11] = 108;   // 54 mbps, in units of 0.5 Mbps
-			break;
-
-		case PHY_11A:
-#ifdef DOT11_N_SUPPORT
-		case PHY_11AN_MIXED:
-		case PHY_11AGN_MIXED:
-		case PHY_11N_5G:
-#endif // DOT11_N_SUPPORT //
-			pAd->CommonCfg.SupRate[0]  = 0x8C;	  // 6 mbps, in units of 0.5 Mbps, basic rate
-			pAd->CommonCfg.SupRate[1]  = 0x12;	  // 9 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.SupRate[2]  = 0x98;	  // 12 mbps, in units of 0.5 Mbps, basic rate
-			pAd->CommonCfg.SupRate[3]  = 0x24;	  // 18 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.SupRate[4]  = 0xb0;	  // 24 mbps, in units of 0.5 Mbps, basic rate
-			pAd->CommonCfg.SupRate[5]  = 0x48;	  // 36 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.SupRate[6]  = 0x60;	  // 48 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.SupRate[7]  = 0x6c;	  // 54 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.SupRateLen  = 8;
-			pAd->CommonCfg.ExtRateLen  = 0;
-			pAd->CommonCfg.DesireRate[0]  = 12;    // 6 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[1]  = 18;    // 9 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[2]  = 24;    // 12 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[3]  = 36;    // 18 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[4]  = 48;    // 24 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[5]  = 72;    // 36 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[6]  = 96;    // 48 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[7]  = 108;   // 54 mbps, in units of 0.5 Mbps
-			//pAd->CommonCfg.HTPhyMode.field.MODE = MODE_OFDM; // This MODE is only FYI. not use
-			break;
-
-		default:
-			break;
-	}
-
-
-	pAd->CommonCfg.BandState = UNKNOWN_BAND;
-}
-
-
-#ifdef DOT11_N_SUPPORT
-/*
-	========================================================================
-	Routine Description:
-		Caller ensures we has 802.11n support.
-		Calls at setting HT from AP/STASetinformation
-
-	Arguments:
-		pAd - Pointer to our adapter
-		phymode  -
-
-	========================================================================
-*/
-VOID	RTMPSetHT(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	OID_SET_HT_PHYMODE *pHTPhyMode)
-{
-	//ULONG	*pmcs;
-	UINT32	Value = 0;
-	UCHAR	BBPValue = 0;
-	UCHAR	BBP3Value = 0;
-	UCHAR	RxStream = pAd->CommonCfg.RxStream;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetHT : HT_mode(%d), ExtOffset(%d), MCS(%d), BW(%d), STBC(%d), SHORTGI(%d)\n",
-										pHTPhyMode->HtMode, pHTPhyMode->ExtOffset,
-										pHTPhyMode->MCS, pHTPhyMode->BW,
-										pHTPhyMode->STBC, pHTPhyMode->SHORTGI));
-
-	// Don't zero supportedHyPhy structure.
-	RTMPZeroMemory(&pAd->CommonCfg.HtCapability, sizeof(pAd->CommonCfg.HtCapability));
-	RTMPZeroMemory(&pAd->CommonCfg.AddHTInfo, sizeof(pAd->CommonCfg.AddHTInfo));
-	RTMPZeroMemory(&pAd->CommonCfg.NewExtChanOffset, sizeof(pAd->CommonCfg.NewExtChanOffset));
-	RTMPZeroMemory(&pAd->CommonCfg.DesiredHtPhy, sizeof(pAd->CommonCfg.DesiredHtPhy));
-
-   	if (pAd->CommonCfg.bRdg)
-	{
-		pAd->CommonCfg.HtCapability.ExtHtCapInfo.PlusHTC = 1;
-		pAd->CommonCfg.HtCapability.ExtHtCapInfo.RDGSupport = 1;
-	}
-	else
-	{
-		pAd->CommonCfg.HtCapability.ExtHtCapInfo.PlusHTC = 0;
-		pAd->CommonCfg.HtCapability.ExtHtCapInfo.RDGSupport = 0;
-	}
-
-	pAd->CommonCfg.HtCapability.HtCapParm.MaxRAmpduFactor = 3;
-	pAd->CommonCfg.DesiredHtPhy.MaxRAmpduFactor = 3;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetHT : RxBAWinLimit = %d\n", pAd->CommonCfg.BACapability.field.RxBAWinLimit));
-
-	// Mimo power save, A-MSDU size,
-	pAd->CommonCfg.DesiredHtPhy.AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable;
-	pAd->CommonCfg.DesiredHtPhy.AmsduSize = (UCHAR)pAd->CommonCfg.BACapability.field.AmsduSize;
-	pAd->CommonCfg.DesiredHtPhy.MimoPs = (UCHAR)pAd->CommonCfg.BACapability.field.MMPSmode;
-	pAd->CommonCfg.DesiredHtPhy.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
-
-	pAd->CommonCfg.HtCapability.HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
-	pAd->CommonCfg.HtCapability.HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
-	pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetHT : AMsduSize = %d, MimoPs = %d, MpduDensity = %d, MaxRAmpduFactor = %d\n",
-													pAd->CommonCfg.DesiredHtPhy.AmsduSize,
-													pAd->CommonCfg.DesiredHtPhy.MimoPs,
-													pAd->CommonCfg.DesiredHtPhy.MpduDensity,
-													pAd->CommonCfg.DesiredHtPhy.MaxRAmpduFactor));
-
-	if(pHTPhyMode->HtMode == HTMODE_GF)
-	{
-		pAd->CommonCfg.HtCapability.HtCapInfo.GF = 1;
-		pAd->CommonCfg.DesiredHtPhy.GF = 1;
-	}
-	else
-		pAd->CommonCfg.DesiredHtPhy.GF = 0;
-
-	// Decide Rx MCSSet
-	switch (RxStream)
-	{
-		case 1:
-			pAd->CommonCfg.HtCapability.MCSSet[0] =  0xff;
-			pAd->CommonCfg.HtCapability.MCSSet[1] =  0x00;
-			break;
-
-		case 2:
-			pAd->CommonCfg.HtCapability.MCSSet[0] =  0xff;
-			pAd->CommonCfg.HtCapability.MCSSet[1] =  0xff;
-			break;
-
-		case 3: // 3*3
-			pAd->CommonCfg.HtCapability.MCSSet[0] =  0xff;
-			pAd->CommonCfg.HtCapability.MCSSet[1] =  0xff;
-			pAd->CommonCfg.HtCapability.MCSSet[2] =  0xff;
-			break;
-	}
-
-	if (pAd->CommonCfg.bForty_Mhz_Intolerant && (pAd->CommonCfg.Channel <= 14) && (pHTPhyMode->BW == BW_40) )
-	{
-		pHTPhyMode->BW = BW_20;
-		pAd->CommonCfg.HtCapability.HtCapInfo.Forty_Mhz_Intolerant = 1;
-	}
-
-	if(pHTPhyMode->BW == BW_40)
-	{
-		pAd->CommonCfg.HtCapability.MCSSet[4] = 0x1; // MCS 32
-		pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth = 1;
-		if (pAd->CommonCfg.Channel <= 14)
-			pAd->CommonCfg.HtCapability.HtCapInfo.CCKmodein40 = 1;
-
-		pAd->CommonCfg.DesiredHtPhy.ChannelWidth = 1;
-		pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth = 1;
-		pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset = (pHTPhyMode->ExtOffset == EXTCHA_BELOW)? (EXTCHA_BELOW): EXTCHA_ABOVE;
-		// Set Regsiter for extension channel position.
-		RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBP3Value);
-		if ((pHTPhyMode->ExtOffset == EXTCHA_BELOW))
-		{
-			Value |= 0x1;
-			BBP3Value |= (0x20);
-			RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
-		}
-		else if ((pHTPhyMode->ExtOffset == EXTCHA_ABOVE))
-		{
-			Value &= 0xfe;
-			BBP3Value &= (~0x20);
-			RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
-		}
-
-		// Turn on BBP 40MHz mode now only as AP .
-		// Sta can turn on BBP 40MHz after connection with 40MHz AP. Sta only broadcast 40MHz capability before connection.
-		if ((pAd->OpMode == OPMODE_AP) || INFRA_ON(pAd) || ADHOC_ON(pAd)
-			)
-		{
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
-			BBPValue &= (~0x18);
-			BBPValue |= 0x10;
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
-
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBP3Value);
-			pAd->CommonCfg.BBPCurrentBW = BW_40;
-		}
-	}
-	else
-	{
-		pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth = 0;
-		pAd->CommonCfg.DesiredHtPhy.ChannelWidth = 0;
-		pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth = 0;
-		pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset = EXTCHA_NONE;
-		pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel;
-		// Turn on BBP 20MHz mode by request here.
-		{
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
-			BBPValue &= (~0x18);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
-			pAd->CommonCfg.BBPCurrentBW = BW_20;
-		}
-	}
-
-	if(pHTPhyMode->STBC == STBC_USE)
-	{
-		pAd->CommonCfg.HtCapability.HtCapInfo.TxSTBC = 1;
-		pAd->CommonCfg.DesiredHtPhy.TxSTBC = 1;
-		pAd->CommonCfg.HtCapability.HtCapInfo.RxSTBC = 1;
-		pAd->CommonCfg.DesiredHtPhy.RxSTBC = 1;
-	}
-	else
-	{
-		pAd->CommonCfg.DesiredHtPhy.TxSTBC = 0;
-		pAd->CommonCfg.DesiredHtPhy.RxSTBC = 0;
-	}
-
-#ifdef RT2870
-	/* Frank recommend ,If not, Tx maybe block in high power. Rx has no problem*/
-	if(IS_RT3070(pAd) && ((pAd->RfIcType == RFIC_3020) || (pAd->RfIcType == RFIC_2020)))
-	{
-		pAd->CommonCfg.HtCapability.HtCapInfo.TxSTBC = 0;
-		pAd->CommonCfg.DesiredHtPhy.TxSTBC = 0;
-	}
-#endif // RT2870 //
-
-	if(pHTPhyMode->SHORTGI == GI_400)
-	{
-		pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor20 = 1;
-		pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor40 = 1;
-		pAd->CommonCfg.DesiredHtPhy.ShortGIfor20 = 1;
-		pAd->CommonCfg.DesiredHtPhy.ShortGIfor40 = 1;
-	}
-	else
-	{
-		pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor20 = 0;
-		pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor40 = 0;
-		pAd->CommonCfg.DesiredHtPhy.ShortGIfor20 = 0;
-		pAd->CommonCfg.DesiredHtPhy.ShortGIfor40 = 0;
-	}
-
-	// We support link adaptation for unsolicit MCS feedback, set to 2.
-	pAd->CommonCfg.HtCapability.ExtHtCapInfo.MCSFeedback = MCSFBK_NONE; //MCSFBK_UNSOLICIT;
-	pAd->CommonCfg.AddHTInfo.ControlChan = pAd->CommonCfg.Channel;
-	// 1, the extension channel above the control channel.
-
-	// EDCA parameters used for AP's own transmission
-	if (pAd->CommonCfg.APEdcaParm.bValid == FALSE)
-	{
-		pAd->CommonCfg.APEdcaParm.bValid = TRUE;
-		pAd->CommonCfg.APEdcaParm.Aifsn[0] = 3;
-		pAd->CommonCfg.APEdcaParm.Aifsn[1] = 7;
-		pAd->CommonCfg.APEdcaParm.Aifsn[2] = 1;
-		pAd->CommonCfg.APEdcaParm.Aifsn[3] = 1;
-
-		pAd->CommonCfg.APEdcaParm.Cwmin[0] = 4;
-		pAd->CommonCfg.APEdcaParm.Cwmin[1] = 4;
-		pAd->CommonCfg.APEdcaParm.Cwmin[2] = 3;
-		pAd->CommonCfg.APEdcaParm.Cwmin[3] = 2;
-
-		pAd->CommonCfg.APEdcaParm.Cwmax[0] = 6;
-		pAd->CommonCfg.APEdcaParm.Cwmax[1] = 10;
-		pAd->CommonCfg.APEdcaParm.Cwmax[2] = 4;
-		pAd->CommonCfg.APEdcaParm.Cwmax[3] = 3;
-
-		pAd->CommonCfg.APEdcaParm.Txop[0]  = 0;
-		pAd->CommonCfg.APEdcaParm.Txop[1]  = 0;
-		pAd->CommonCfg.APEdcaParm.Txop[2]  = 94;
-		pAd->CommonCfg.APEdcaParm.Txop[3]  = 47;
-	}
-	AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm);
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		RTMPSetIndividualHT(pAd, 0);
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-}
-
-/*
-	========================================================================
-	Routine Description:
-		Caller ensures we has 802.11n support.
-		Calls at setting HT from AP/STASetinformation
-
-	Arguments:
-		pAd - Pointer to our adapter
-		phymode  -
-
-	========================================================================
-*/
-VOID	RTMPSetIndividualHT(
-	IN	PRTMP_ADAPTER		pAd,
-	IN	UCHAR				apidx)
-{
-	PRT_HT_PHY_INFO		pDesired_ht_phy = NULL;
-	UCHAR	TxStream = pAd->CommonCfg.TxStream;
-	UCHAR	DesiredMcs	= MCS_AUTO;
-
-	do
-	{
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			pDesired_ht_phy = &pAd->StaCfg.DesiredHtPhyInfo;
-			DesiredMcs = pAd->StaCfg.DesiredTransmitSetting.field.MCS;
-			//pAd->StaCfg.bAutoTxRateSwitch = (DesiredMcs == MCS_AUTO) ? TRUE : FALSE;
-				break;
-		}
-#endif // CONFIG_STA_SUPPORT //
-	} while (FALSE);
-
-	if (pDesired_ht_phy == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("RTMPSetIndividualHT: invalid apidx(%d)\n", apidx));
-		return;
-	}
-	RTMPZeroMemory(pDesired_ht_phy, sizeof(RT_HT_PHY_INFO));
-
-	DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetIndividualHT : Desired MCS = %d\n", DesiredMcs));
-	// Check the validity of MCS
-	if ((TxStream == 1) && ((DesiredMcs >= MCS_8) && (DesiredMcs <= MCS_15)))
-	{
-		DBGPRINT(RT_DEBUG_WARN, ("RTMPSetIndividualHT: MCS(%d) is invalid in 1S, reset it as MCS_7\n", DesiredMcs));
-		DesiredMcs = MCS_7;
-	}
-
-	if ((pAd->CommonCfg.DesiredHtPhy.ChannelWidth == BW_20) && (DesiredMcs == MCS_32))
-	{
-		DBGPRINT(RT_DEBUG_WARN, ("RTMPSetIndividualHT: MCS_32 is only supported in 40-MHz, reset it as MCS_0\n"));
-		DesiredMcs = MCS_0;
-	}
-
-	pDesired_ht_phy->bHtEnable = TRUE;
-
-	// Decide desired Tx MCS
-	switch (TxStream)
-	{
-		case 1:
-			if (DesiredMcs == MCS_AUTO)
-			{
-				pDesired_ht_phy->MCSSet[0]= 0xff;
-				pDesired_ht_phy->MCSSet[1]= 0x00;
-			}
-			else if (DesiredMcs <= MCS_7)
-			{
-				pDesired_ht_phy->MCSSet[0]= 1<<DesiredMcs;
-				pDesired_ht_phy->MCSSet[1]= 0x00;
-			}
-			break;
-
-		case 2:
-			if (DesiredMcs == MCS_AUTO)
-			{
-				pDesired_ht_phy->MCSSet[0]= 0xff;
-				pDesired_ht_phy->MCSSet[1]= 0xff;
-			}
-			else if (DesiredMcs <= MCS_15)
-			{
-				ULONG mode;
-
-				mode = DesiredMcs / 8;
-				if (mode < 2)
-					pDesired_ht_phy->MCSSet[mode] = (1 << (DesiredMcs - mode * 8));
-			}
-			break;
-
-		case 3: // 3*3
-			if (DesiredMcs == MCS_AUTO)
-			{
-				/* MCS0 ~ MCS23, 3 bytes */
-				pDesired_ht_phy->MCSSet[0]= 0xff;
-				pDesired_ht_phy->MCSSet[1]= 0xff;
-				pDesired_ht_phy->MCSSet[2]= 0xff;
-			}
-			else if (DesiredMcs <= MCS_23)
-			{
-				ULONG mode;
-
-				mode = DesiredMcs / 8;
-				if (mode < 3)
-					pDesired_ht_phy->MCSSet[mode] = (1 << (DesiredMcs - mode * 8));
-			}
-			break;
-	}
-
-	if(pAd->CommonCfg.DesiredHtPhy.ChannelWidth == BW_40)
-	{
-		if (DesiredMcs == MCS_AUTO || DesiredMcs == MCS_32)
-			pDesired_ht_phy->MCSSet[4] = 0x1;
-	}
-
-	// update HT Rate setting
-    if (pAd->OpMode == OPMODE_STA)
-        MlmeUpdateHtTxRates(pAd, BSS0);
-    else
-	    MlmeUpdateHtTxRates(pAd, apidx);
-}
-
-
-/*
-	========================================================================
-	Routine Description:
-		Update HT IE from our capability.
-
-	Arguments:
-		Send all HT IE in beacon/probe rsp/assoc rsp/action frame.
-
-
-	========================================================================
-*/
-VOID	RTMPUpdateHTIE(
-	IN	RT_HT_CAPABILITY	*pRtHt,
-	IN		UCHAR				*pMcsSet,
-	OUT		HT_CAPABILITY_IE *pHtCapability,
-	OUT		ADD_HT_INFO_IE		*pAddHtInfo)
-{
-	RTMPZeroMemory(pHtCapability, sizeof(HT_CAPABILITY_IE));
-	RTMPZeroMemory(pAddHtInfo, sizeof(ADD_HT_INFO_IE));
-
-		pHtCapability->HtCapInfo.ChannelWidth = pRtHt->ChannelWidth;
-		pHtCapability->HtCapInfo.MimoPs = pRtHt->MimoPs;
-		pHtCapability->HtCapInfo.GF = pRtHt->GF;
-		pHtCapability->HtCapInfo.ShortGIfor20 = pRtHt->ShortGIfor20;
-		pHtCapability->HtCapInfo.ShortGIfor40 = pRtHt->ShortGIfor40;
-		pHtCapability->HtCapInfo.TxSTBC = pRtHt->TxSTBC;
-		pHtCapability->HtCapInfo.RxSTBC = pRtHt->RxSTBC;
-		pHtCapability->HtCapInfo.AMsduSize = pRtHt->AmsduSize;
-		pHtCapability->HtCapParm.MaxRAmpduFactor = pRtHt->MaxRAmpduFactor;
-		pHtCapability->HtCapParm.MpduDensity = pRtHt->MpduDensity;
-
-		pAddHtInfo->AddHtInfo.ExtChanOffset = pRtHt->ExtChanOffset ;
-		pAddHtInfo->AddHtInfo.RecomWidth = pRtHt->RecomWidth;
-		pAddHtInfo->AddHtInfo2.OperaionMode = pRtHt->OperaionMode;
-		pAddHtInfo->AddHtInfo2.NonGfPresent = pRtHt->NonGfPresent;
-		RTMPMoveMemory(pAddHtInfo->MCSSet, /*pRtHt->MCSSet*/pMcsSet, 4); // rt2860 only support MCS max=32, no need to copy all 16 uchar.
-
-        DBGPRINT(RT_DEBUG_TRACE,("RTMPUpdateHTIE <== \n"));
-}
-#endif // DOT11_N_SUPPORT //
-
-/*
-	========================================================================
-	Description:
-		Add Client security information into ASIC WCID table and IVEIV table.
-    Return:
-	========================================================================
-*/
-VOID	RTMPAddWcidAttributeEntry(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			BssIdx,
-	IN 	UCHAR		 	KeyIdx,
-	IN 	UCHAR		 	CipherAlg,
-	IN 	MAC_TABLE_ENTRY *pEntry)
-{
-	UINT32		WCIDAttri = 0;
-	USHORT		offset;
-	UCHAR		IVEIV = 0;
-	USHORT		Wcid = 0;
-
-	{
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			if (BssIdx > BSS0)
-			{
-				DBGPRINT(RT_DEBUG_ERROR, ("RTMPAddWcidAttributeEntry: The BSS-index(%d) is out of range for Infra link. \n", BssIdx));
-				return;
-			}
-
-			// 1.	In ADHOC mode, the AID is wcid number. And NO mesh link exists.
-			// 2.	In Infra mode, the AID:1 MUST be wcid of infra STA.
-			//					   the AID:2~ assign to mesh link entry.
-			if (pEntry && ADHOC_ON(pAd))
-				Wcid = pEntry->Aid;
-			else if (pEntry && INFRA_ON(pAd))
-			{
-#ifdef QOS_DLS_SUPPORT
-				if (pEntry->ValidAsDls == TRUE)
-					Wcid = pEntry->Aid;
-				else
-#endif // QOS_DLS_SUPPORT //
-				Wcid = BSSID_WCID;
-			}
-			else
-				Wcid = MCAST_WCID;
-		}
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-	// Update WCID attribute table
-	offset = MAC_WCID_ATTRIBUTE_BASE + (Wcid * HW_WCID_ATTRI_SIZE);
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if (pEntry && pEntry->ValidAsMesh)
-			WCIDAttri = (CipherAlg<<1) | PAIRWISEKEYTABLE;
-#ifdef QOS_DLS_SUPPORT
-		else if ((pEntry) && (pEntry->ValidAsDls) &&
-					((CipherAlg == CIPHER_TKIP) ||
-				 	(CipherAlg == CIPHER_TKIP_NO_MIC) ||
-					(CipherAlg == CIPHER_AES) ||
-				 	(CipherAlg == CIPHER_NONE)))
-			WCIDAttri = (CipherAlg<<1) | PAIRWISEKEYTABLE;
-#endif // QOS_DLS_SUPPORT //
-		else
-			WCIDAttri = (CipherAlg<<1) | SHAREDKEYTABLE;
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	RTMP_IO_WRITE32(pAd, offset, WCIDAttri);
-
-
-	// Update IV/EIV table
-	offset = MAC_IVEIV_TABLE_BASE + (Wcid * HW_IVEIV_ENTRY_SIZE);
-
-	// WPA mode
-	if ((CipherAlg == CIPHER_TKIP) || (CipherAlg == CIPHER_TKIP_NO_MIC) || (CipherAlg == CIPHER_AES))
-	{
-		// Eiv bit on. keyid always is 0 for pairwise key
-		IVEIV = (KeyIdx <<6) | 0x20;
-	}
-	else
-	{
-		// WEP KeyIdx is default tx key.
-		IVEIV = (KeyIdx << 6);
-	}
-
-	// For key index and ext IV bit, so only need to update the position(offset+3).
-#ifdef RT2870
-	RTUSBMultiWrite_OneByte(pAd, offset+3, &IVEIV);
-#endif // RT2870 //
-
-	DBGPRINT(RT_DEBUG_TRACE,("RTMPAddWcidAttributeEntry: WCID #%d, KeyIndex #%d, Alg=%s\n",Wcid, KeyIdx, CipherName[CipherAlg]));
-	DBGPRINT(RT_DEBUG_TRACE,("	WCIDAttri = 0x%x \n",  WCIDAttri));
-
-}
-
-/*
-    ==========================================================================
-    Description:
-        Parse encryption type
-Arguments:
-    pAdapter                    Pointer to our adapter
-    wrq                         Pointer to the ioctl argument
-
-    Return Value:
-        None
-
-    Note:
-    ==========================================================================
-*/
-CHAR *GetEncryptType(CHAR enc)
-{
-    if(enc == Ndis802_11WEPDisabled)
-        return "NONE";
-    if(enc == Ndis802_11WEPEnabled)
-    	return "WEP";
-    if(enc == Ndis802_11Encryption2Enabled)
-    	return "TKIP";
-    if(enc == Ndis802_11Encryption3Enabled)
-    	return "AES";
-	if(enc == Ndis802_11Encryption4Enabled)
-    	return "TKIPAES";
-    else
-    	return "UNKNOW";
-}
-
-CHAR *GetAuthMode(CHAR auth)
-{
-    if(auth == Ndis802_11AuthModeOpen)
-    	return "OPEN";
-    if(auth == Ndis802_11AuthModeShared)
-    	return "SHARED";
-	if(auth == Ndis802_11AuthModeAutoSwitch)
-    	return "AUTOWEP";
-    if(auth == Ndis802_11AuthModeWPA)
-    	return "WPA";
-    if(auth == Ndis802_11AuthModeWPAPSK)
-    	return "WPAPSK";
-    if(auth == Ndis802_11AuthModeWPANone)
-    	return "WPANONE";
-    if(auth == Ndis802_11AuthModeWPA2)
-    	return "WPA2";
-    if(auth == Ndis802_11AuthModeWPA2PSK)
-    	return "WPA2PSK";
-	if(auth == Ndis802_11AuthModeWPA1WPA2)
-    	return "WPA1WPA2";
-	if(auth == Ndis802_11AuthModeWPA1PSKWPA2PSK)
-    	return "WPA1PSKWPA2PSK";
-
-    	return "UNKNOW";
-}
-
-#if 1 //#ifndef UCOS
-/*
-    ==========================================================================
-    Description:
-        Get site survey results
-	Arguments:
-	    pAdapter                    Pointer to our adapter
-	    wrq                         Pointer to the ioctl argument
-
-    Return Value:
-        None
-
-    Note:
-        Usage:
-        		1.) UI needs to wait 4 seconds after issue a site survey command
-        		2.) iwpriv ra0 get_site_survey
-        		3.) UI needs to prepare at least 4096bytes to get the results
-    ==========================================================================
-*/
-#define	LINE_LEN	(4+33+20+8+10+9+7+3)	// Channel+SSID+Bssid+WepStatus+AuthMode+Signal+WiressMode+NetworkType
-VOID RTMPIoctlGetSiteSurvey(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq)
-{
-	CHAR		*msg;
-	INT 		i=0;
-	INT			WaitCnt;
-	INT 		Status=0;
-	CHAR		Ssid[MAX_LEN_OF_SSID +1];
-    INT         Rssi = 0, max_len = LINE_LEN;
-	UINT        Rssi_Quality = 0;
-	NDIS_802_11_NETWORK_TYPE    wireless_mode;
-
-	os_alloc_mem(NULL, (PUCHAR *)&msg, sizeof(CHAR)*((MAX_LEN_OF_BSS_TABLE)*max_len));
-
-	if (msg == NULL)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("RTMPIoctlGetSiteSurvey - msg memory alloc fail.\n"));
-		return;
-	}
-
-	memset(msg, 0 ,(MAX_LEN_OF_BSS_TABLE)*max_len );
-	memset(Ssid, 0 ,(MAX_LEN_OF_SSID +1));
-	sprintf(msg,"%s","\n");
-	sprintf(msg+strlen(msg),"%-4s%-33s%-20s%-8s%-10s%-9s%-7s%-3s\n",
-	    "Ch", "SSID", "BSSID", "Enc", "Auth", "Siganl(%)", "W-Mode", " NT");
-
-
-	WaitCnt = 0;
-#ifdef CONFIG_STA_SUPPORT
-	pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE;
-	while ((ScanRunning(pAdapter) == TRUE) && (WaitCnt++ < 200))
-		OS_WAIT(500);
-#endif // CONFIG_STA_SUPPORT //
-
-	for(i=0; i<pAdapter->ScanTab.BssNr ;i++)
-	{
-		if( pAdapter->ScanTab.BssEntry[i].Channel==0)
-			break;
-
-		if((strlen(msg)+max_len ) >= IW_SCAN_MAX_DATA)
-			break;
-
-		//Channel
-		sprintf(msg+strlen(msg),"%-4d", pAdapter->ScanTab.BssEntry[i].Channel);
-		//SSID
-		memcpy(Ssid, pAdapter->ScanTab.BssEntry[i].Ssid, pAdapter->ScanTab.BssEntry[i].SsidLen);
-		Ssid[pAdapter->ScanTab.BssEntry[i].SsidLen] = '\0';
-		sprintf(msg+strlen(msg),"%-33s", Ssid);
-		//BSSID
-		sprintf(msg+strlen(msg),"%02x:%02x:%02x:%02x:%02x:%02x   ",
-			pAdapter->ScanTab.BssEntry[i].Bssid[0],
-			pAdapter->ScanTab.BssEntry[i].Bssid[1],
-			pAdapter->ScanTab.BssEntry[i].Bssid[2],
-			pAdapter->ScanTab.BssEntry[i].Bssid[3],
-			pAdapter->ScanTab.BssEntry[i].Bssid[4],
-			pAdapter->ScanTab.BssEntry[i].Bssid[5]);
-		//Encryption Type
-		sprintf(msg+strlen(msg),"%-8s",GetEncryptType(pAdapter->ScanTab.BssEntry[i].WepStatus));
-		//Authentication Mode
-		if (pAdapter->ScanTab.BssEntry[i].WepStatus == Ndis802_11WEPEnabled)
-			sprintf(msg+strlen(msg),"%-10s", "UNKNOW");
-		else
-			sprintf(msg+strlen(msg),"%-10s",GetAuthMode(pAdapter->ScanTab.BssEntry[i].AuthMode));
-		// Rssi
-		Rssi = (INT)pAdapter->ScanTab.BssEntry[i].Rssi;
-		if (Rssi >= -50)
-			Rssi_Quality = 100;
-		else if (Rssi >= -80)    // between -50 ~ -80dbm
-			Rssi_Quality = (UINT)(24 + ((Rssi + 80) * 26)/10);
-		else if (Rssi >= -90)   // between -80 ~ -90dbm
-			Rssi_Quality = (UINT)(((Rssi + 90) * 26)/10);
-		else    // < -84 dbm
-			Rssi_Quality = 0;
-		sprintf(msg+strlen(msg),"%-9d", Rssi_Quality);
-		// Wireless Mode
-		wireless_mode = NetworkTypeInUseSanity(&pAdapter->ScanTab.BssEntry[i]);
-		if (wireless_mode == Ndis802_11FH ||
-			wireless_mode == Ndis802_11DS)
-			sprintf(msg+strlen(msg),"%-7s", "11b");
-		else if (wireless_mode == Ndis802_11OFDM5)
-			sprintf(msg+strlen(msg),"%-7s", "11a");
-		else if (wireless_mode == Ndis802_11OFDM5_N)
-			sprintf(msg+strlen(msg),"%-7s", "11a/n");
-		else if (wireless_mode == Ndis802_11OFDM24)
-			sprintf(msg+strlen(msg),"%-7s", "11b/g");
-		else if (wireless_mode == Ndis802_11OFDM24_N)
-			sprintf(msg+strlen(msg),"%-7s", "11b/g/n");
-		else
-			sprintf(msg+strlen(msg),"%-7s", "unknow");
-		//Network Type
-		if (pAdapter->ScanTab.BssEntry[i].BssType == BSS_ADHOC)
-			sprintf(msg+strlen(msg),"%-3s", " Ad");
-		else
-			sprintf(msg+strlen(msg),"%-3s", " In");
-
-        sprintf(msg+strlen(msg),"\n");
-	}
-
-#ifdef CONFIG_STA_SUPPORT
-	pAdapter->StaCfg.bScanReqIsFromWebUI = FALSE;
-#endif // CONFIG_STA_SUPPORT //
-	wrq->u.data.length = strlen(msg);
-	Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("RTMPIoctlGetSiteSurvey - wrq->u.data.length = %d\n", wrq->u.data.length));
-	os_free_mem(NULL, (PUCHAR)msg);
-}
-
-
-#define	MAC_LINE_LEN	(14+4+4+10+10+10+6+6)	// Addr+aid+psm+datatime+rxbyte+txbyte+current tx rate+last tx rate
-VOID RTMPIoctlGetMacTable(
-	IN PRTMP_ADAPTER pAd,
-	IN struct iwreq *wrq)
-{
-	INT i;
-	RT_802_11_MAC_TABLE MacTab;
-	char *msg;
-
-	MacTab.Num = 0;
-	for (i=0; i<MAX_LEN_OF_MAC_TABLE; i++)
-	{
-		if (pAd->MacTab.Content[i].ValidAsCLI && (pAd->MacTab.Content[i].Sst == SST_ASSOC))
-		{
-			COPY_MAC_ADDR(MacTab.Entry[MacTab.Num].Addr, &pAd->MacTab.Content[i].Addr);
-			MacTab.Entry[MacTab.Num].Aid = (UCHAR)pAd->MacTab.Content[i].Aid;
-			MacTab.Entry[MacTab.Num].Psm = pAd->MacTab.Content[i].PsMode;
-#ifdef DOT11_N_SUPPORT
-			MacTab.Entry[MacTab.Num].MimoPs = pAd->MacTab.Content[i].MmpsMode;
-#endif // DOT11_N_SUPPORT //
-
-			// Fill in RSSI per entry
-			MacTab.Entry[MacTab.Num].AvgRssi0 = pAd->MacTab.Content[i].RssiSample.AvgRssi0;
-			MacTab.Entry[MacTab.Num].AvgRssi1 = pAd->MacTab.Content[i].RssiSample.AvgRssi1;
-			MacTab.Entry[MacTab.Num].AvgRssi2 = pAd->MacTab.Content[i].RssiSample.AvgRssi2;
-
-			// the connected time per entry
-			MacTab.Entry[MacTab.Num].ConnectedTime = pAd->MacTab.Content[i].StaConnectTime;
-#if 0 // ToDo
-			MacTab.Entry[MacTab.Num].HSCounter.LastDataPacketTime = pAd->MacTab.Content[i].HSCounter.LastDataPacketTime;
-			MacTab.Entry[MacTab.Num].HSCounter.TotalRxByteCount = pAd->MacTab.Content[i].HSCounter.TotalRxByteCount;
-			MacTab.Entry[MacTab.Num].HSCounter.TotalTxByteCount = pAd->MacTab.Content[i].HSCounter.TotalTxByteCount;
-#endif
-			MacTab.Entry[MacTab.Num].TxRate.field.MCS = pAd->MacTab.Content[i].HTPhyMode.field.MCS;
-			MacTab.Entry[MacTab.Num].TxRate.field.BW = pAd->MacTab.Content[i].HTPhyMode.field.BW;
-			MacTab.Entry[MacTab.Num].TxRate.field.ShortGI = pAd->MacTab.Content[i].HTPhyMode.field.ShortGI;
-			MacTab.Entry[MacTab.Num].TxRate.field.STBC = pAd->MacTab.Content[i].HTPhyMode.field.STBC;
-			MacTab.Entry[MacTab.Num].TxRate.field.rsv = pAd->MacTab.Content[i].HTPhyMode.field.rsv;
-			MacTab.Entry[MacTab.Num].TxRate.field.MODE = pAd->MacTab.Content[i].HTPhyMode.field.MODE;
-			MacTab.Entry[MacTab.Num].TxRate.word = pAd->MacTab.Content[i].HTPhyMode.word;
-
-			MacTab.Num += 1;
-		}
-	}
-	wrq->u.data.length = sizeof(RT_802_11_MAC_TABLE);
-	if (copy_to_user(wrq->u.data.pointer, &MacTab, wrq->u.data.length))
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("%s: copy_to_user() fail\n", __func__));
-	}
-
-	msg = (CHAR *) kmalloc(sizeof(CHAR)*(MAX_LEN_OF_MAC_TABLE*MAC_LINE_LEN), MEM_ALLOC_FLAG);
-	memset(msg, 0 ,MAX_LEN_OF_MAC_TABLE*MAC_LINE_LEN );
-	sprintf(msg,"%s","\n");
-	sprintf(msg+strlen(msg),"%-14s%-4s%-4s%-10s%-10s%-10s%-6s%-6s\n",
-		"MAC", "AID", "PSM", "LDT", "RxB", "TxB","CTxR", "LTxR");
-
-	for (i=0; i<MAX_LEN_OF_MAC_TABLE; i++)
-	{
-		PMAC_TABLE_ENTRY pEntry = &pAd->MacTab.Content[i];
-		if (pEntry->ValidAsCLI && (pEntry->Sst == SST_ASSOC))
-		{
-			if((strlen(msg)+MAC_LINE_LEN ) >= (MAX_LEN_OF_MAC_TABLE*MAC_LINE_LEN) )
-				break;
-			sprintf(msg+strlen(msg),"%02x%02x%02x%02x%02x%02x  ",
-				pEntry->Addr[0], pEntry->Addr[1], pEntry->Addr[2],
-				pEntry->Addr[3], pEntry->Addr[4], pEntry->Addr[5]);
-			sprintf(msg+strlen(msg),"%-4d", (int)pEntry->Aid);
-			sprintf(msg+strlen(msg),"%-4d", (int)pEntry->PsMode);
-			sprintf(msg+strlen(msg),"%-10d",0/*pAd->MacTab.Content[i].HSCounter.LastDataPacketTime*/); // ToDo
-			sprintf(msg+strlen(msg),"%-10d",0/*pAd->MacTab.Content[i].HSCounter.TotalRxByteCount*/); // ToDo
-			sprintf(msg+strlen(msg),"%-10d",0/*pAd->MacTab.Content[i].HSCounter.TotalTxByteCount*/); // ToDo
-			sprintf(msg+strlen(msg),"%-6d",RateIdToMbps[pAd->MacTab.Content[i].CurrTxRate]);
-			sprintf(msg+strlen(msg),"%-6d\n",0/*RateIdToMbps[pAd->MacTab.Content[i].LastTxRate]*/); // ToDo
-		}
-	}
-	// for compatible with old API just do the printk to console
-	//wrq->u.data.length = strlen(msg);
-	//if (copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length))
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("%s", msg));
-	}
-
-	kfree(msg);
-}
-#endif // UCOS //
-
-#ifdef DOT11_N_SUPPORT
-INT	Set_BASetup_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-    UCHAR mac[6], tid;
-	char *token, sepValue[] = ":", DASH = '-';
-	INT i;
-    MAC_TABLE_ENTRY *pEntry;
-
-/*
-	The BASetup inupt string format should be xx:xx:xx:xx:xx:xx-d,
-		=>The six 2 digit hex-decimal number previous are the Mac address,
-		=>The seventh decimal number is the tid value.
-*/
-	//printk("\n%s\n", arg);
-
-	if(strlen(arg) < 19)  //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and tid value in decimal format.
-		return FALSE;
-
-	token = strchr(arg, DASH);
-	if ((token != NULL) && (strlen(token)>1))
-	{
-		tid = simple_strtol((token+1), 0, 10);
-		if (tid > 15)
-			return FALSE;
-
-		*token = '\0';
-		for (i = 0, token = rstrtok(arg, &sepValue[0]); token; token = rstrtok(NULL, &sepValue[0]), i++)
-		{
-			if((strlen(token) != 2) || (!isxdigit(*token)) || (!isxdigit(*(token+1))))
-				return FALSE;
-			AtoH(token, (PUCHAR)(&mac[i]), 1);
-		}
-		if(i != 6)
-			return FALSE;
-
-		printk("\n%02x:%02x:%02x:%02x:%02x:%02x-%02x\n", mac[0], mac[1],
-				mac[2], mac[3], mac[4], mac[5], tid);
-
-	    pEntry = MacTableLookup(pAd, mac);
-
-    	if (pEntry) {
-        	printk("\nSetup BA Session: Tid = %d\n", tid);
-	        BAOriSessionSetUp(pAd, pEntry, tid, 0, 100, TRUE);
-    	}
-
-		return TRUE;
-	}
-
-	return FALSE;
-
-}
-
-INT	Set_BADecline_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG bBADecline;
-
-	bBADecline = simple_strtol(arg, 0, 10);
-
-	if (bBADecline == 0)
-	{
-		pAd->CommonCfg.bBADecline = FALSE;
-	}
-	else if (bBADecline == 1)
-	{
-		pAd->CommonCfg.bBADecline = TRUE;
-	}
-	else
-	{
-		return FALSE; //Invalid argument
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_BADecline_Proc::(BADecline=%d)\n", pAd->CommonCfg.bBADecline));
-
-	return TRUE;
-}
-
-INT	Set_BAOriTearDown_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-    UCHAR mac[6], tid;
-	char *token, sepValue[] = ":", DASH = '-';
-	INT i;
-    MAC_TABLE_ENTRY *pEntry;
-
-    //printk("\n%s\n", arg);
-/*
-	The BAOriTearDown inupt string format should be xx:xx:xx:xx:xx:xx-d,
-		=>The six 2 digit hex-decimal number previous are the Mac address,
-		=>The seventh decimal number is the tid value.
-*/
-    if(strlen(arg) < 19)  //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and tid value in decimal format.
-		return FALSE;
-
-	token = strchr(arg, DASH);
-	if ((token != NULL) && (strlen(token)>1))
-	{
-		tid = simple_strtol((token+1), 0, 10);
-		if (tid > NUM_OF_TID)
-			return FALSE;
-
-		*token = '\0';
-		for (i = 0, token = rstrtok(arg, &sepValue[0]); token; token = rstrtok(NULL, &sepValue[0]), i++)
-		{
-			if((strlen(token) != 2) || (!isxdigit(*token)) || (!isxdigit(*(token+1))))
-				return FALSE;
-			AtoH(token, (PUCHAR)(&mac[i]), 1);
-		}
-		if(i != 6)
-			return FALSE;
-
-	    printk("\n%02x:%02x:%02x:%02x:%02x:%02x-%02x", mac[0], mac[1],
-	           mac[2], mac[3], mac[4], mac[5], tid);
-
-	    pEntry = MacTableLookup(pAd, mac);
-
-	    if (pEntry) {
-	        printk("\nTear down Ori BA Session: Tid = %d\n", tid);
-        BAOriSessionTearDown(pAd, pEntry->Aid, tid, FALSE, TRUE);
-	    }
-
-		return TRUE;
-	}
-
-	return FALSE;
-
-}
-
-INT	Set_BARecTearDown_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-    UCHAR mac[6], tid;
-	char *token, sepValue[] = ":", DASH = '-';
-	INT i;
-    MAC_TABLE_ENTRY *pEntry;
-
-    //printk("\n%s\n", arg);
-/*
-	The BARecTearDown inupt string format should be xx:xx:xx:xx:xx:xx-d,
-		=>The six 2 digit hex-decimal number previous are the Mac address,
-		=>The seventh decimal number is the tid value.
-*/
-    if(strlen(arg) < 19)  //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and tid value in decimal format.
-		return FALSE;
-
-	token = strchr(arg, DASH);
-	if ((token != NULL) && (strlen(token)>1))
-	{
-		tid = simple_strtol((token+1), 0, 10);
-		if (tid > NUM_OF_TID)
-			return FALSE;
-
-		*token = '\0';
-		for (i = 0, token = rstrtok(arg, &sepValue[0]); token; token = rstrtok(NULL, &sepValue[0]), i++)
-		{
-			if((strlen(token) != 2) || (!isxdigit(*token)) || (!isxdigit(*(token+1))))
-				return FALSE;
-			AtoH(token, (PUCHAR)(&mac[i]), 1);
-		}
-		if(i != 6)
-			return FALSE;
-
-		printk("\n%02x:%02x:%02x:%02x:%02x:%02x-%02x", mac[0], mac[1],
-		       mac[2], mac[3], mac[4], mac[5], tid);
-
-		pEntry = MacTableLookup(pAd, mac);
-
-		if (pEntry) {
-		    printk("\nTear down Rec BA Session: Tid = %d\n", tid);
-		    BARecSessionTearDown(pAd, pEntry->Aid, tid, FALSE);
-		}
-
-		return TRUE;
-	}
-
-	return FALSE;
-
-}
-
-INT	Set_HtBw_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG HtBw;
-
-	HtBw = simple_strtol(arg, 0, 10);
-	if (HtBw == BW_40)
-		pAd->CommonCfg.RegTransmitSetting.field.BW  = BW_40;
-	else if (HtBw == BW_20)
-		pAd->CommonCfg.RegTransmitSetting.field.BW  = BW_20;
-	else
-		return FALSE;  //Invalid argument
-
-	SetCommonHT(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtBw_Proc::(HtBw=%d)\n", pAd->CommonCfg.RegTransmitSetting.field.BW));
-
-	return TRUE;
-}
-
-INT	Set_HtMcs_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG HtMcs, Mcs_tmp;
-#ifdef CONFIG_STA_SUPPORT
-    BOOLEAN bAutoRate = FALSE;
-#endif // CONFIG_STA_SUPPORT //
-
-	Mcs_tmp = simple_strtol(arg, 0, 10);
-
-	if (Mcs_tmp <= 15 || Mcs_tmp == 32)
-		HtMcs = Mcs_tmp;
-	else
-		HtMcs = MCS_AUTO;
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		pAd->StaCfg.DesiredTransmitSetting.field.MCS = HtMcs;
-		pAd->StaCfg.bAutoTxRateSwitch = (HtMcs == MCS_AUTO) ? TRUE:FALSE;
-		DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMcs_Proc::(HtMcs=%d, bAutoTxRateSwitch = %d)\n",
-						pAd->StaCfg.DesiredTransmitSetting.field.MCS, pAd->StaCfg.bAutoTxRateSwitch));
-
-		if ((pAd->CommonCfg.PhyMode < PHY_11ABGN_MIXED) ||
-			(pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE < MODE_HTMIX))
-		{
-	        if ((pAd->StaCfg.DesiredTransmitSetting.field.MCS != MCS_AUTO) &&
-				(HtMcs >= 0 && HtMcs <= 3) &&
-	            (pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode == FIXED_TXMODE_CCK))
-			{
-				RTMPSetDesiredRates(pAd, (LONG) (RateIdToMbps[HtMcs] * 1000000));
-			}
-	        else if ((pAd->StaCfg.DesiredTransmitSetting.field.MCS != MCS_AUTO) &&
-					(HtMcs >= 0 && HtMcs <= 7) &&
-	            	(pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode == FIXED_TXMODE_OFDM))
-			{
-				RTMPSetDesiredRates(pAd, (LONG) (RateIdToMbps[HtMcs+4] * 1000000));
-			}
-			else
-				bAutoRate = TRUE;
-
-			if (bAutoRate)
-			{
-	            pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
-				RTMPSetDesiredRates(pAd, -1);
-			}
-	        DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMcs_Proc::(FixedTxMode=%d)\n",pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode));
-		}
-        if (ADHOC_ON(pAd))
-            return TRUE;
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	SetCommonHT(pAd);
-
-	return TRUE;
-}
-
-INT	Set_HtGi_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG HtGi;
-
-	HtGi = simple_strtol(arg, 0, 10);
-
-	if ( HtGi == GI_400)
-		pAd->CommonCfg.RegTransmitSetting.field.ShortGI = GI_400;
-	else if ( HtGi == GI_800 )
-		pAd->CommonCfg.RegTransmitSetting.field.ShortGI = GI_800;
-	else
-		return FALSE; //Invalid argument
-
-	SetCommonHT(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtGi_Proc::(ShortGI=%d)\n",pAd->CommonCfg.RegTransmitSetting.field.ShortGI));
-
-	return TRUE;
-}
-
-
-INT	Set_HtTxBASize_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UCHAR Size;
-
-	Size = simple_strtol(arg, 0, 10);
-
-	if (Size <=0 || Size >=64)
-	{
-		Size = 8;
-	}
-	pAd->CommonCfg.TxBASize = Size-1;
-	DBGPRINT(RT_DEBUG_ERROR, ("Set_HtTxBASize ::(TxBASize= %d)\n", Size));
-
-	return TRUE;
-}
-
-
-INT	Set_HtOpMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-
-	if (Value == HTMODE_GF)
-		pAd->CommonCfg.RegTransmitSetting.field.HTMODE  = HTMODE_GF;
-	else if ( Value == HTMODE_MM )
-		pAd->CommonCfg.RegTransmitSetting.field.HTMODE  = HTMODE_MM;
-	else
-		return FALSE; //Invalid argument
-
-	SetCommonHT(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtOpMode_Proc::(HtOpMode=%d)\n",pAd->CommonCfg.RegTransmitSetting.field.HTMODE));
-
-	return TRUE;
-
-}
-
-INT	Set_HtStbc_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-
-	if (Value == STBC_USE)
-		pAd->CommonCfg.RegTransmitSetting.field.STBC = STBC_USE;
-	else if ( Value == STBC_NONE )
-		pAd->CommonCfg.RegTransmitSetting.field.STBC = STBC_NONE;
-	else
-		return FALSE; //Invalid argument
-
-	SetCommonHT(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_Stbc_Proc::(HtStbc=%d)\n",pAd->CommonCfg.RegTransmitSetting.field.STBC));
-
-	return TRUE;
-}
-
-INT	Set_HtHtc_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-	if (Value == 0)
-		pAd->HTCEnable = FALSE;
-	else if ( Value ==1 )
-        	pAd->HTCEnable = TRUE;
-	else
-		return FALSE; //Invalid argument
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtHtc_Proc::(HtHtc=%d)\n",pAd->HTCEnable));
-
-	return TRUE;
-}
-
-INT	Set_HtExtcha_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-
-	if (Value == 0)
-		pAd->CommonCfg.RegTransmitSetting.field.EXTCHA  = EXTCHA_BELOW;
-	else if ( Value ==1 )
-        pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_ABOVE;
-	else
-		return FALSE; //Invalid argument
-
-	SetCommonHT(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtExtcha_Proc::(HtExtcha=%d)\n",pAd->CommonCfg.RegTransmitSetting.field.EXTCHA));
-
-	return TRUE;
-}
-
-INT	Set_HtMpduDensity_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-
-	if (Value <=7 && Value >= 0)
-		pAd->CommonCfg.BACapability.field.MpduDensity = Value;
-	else
-		pAd->CommonCfg.BACapability.field.MpduDensity = 4;
-
-	SetCommonHT(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMpduDensity_Proc::(HtMpduDensity=%d)\n",pAd->CommonCfg.BACapability.field.MpduDensity));
-
-	return TRUE;
-}
-
-INT	Set_HtBaWinSize_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-
-
-	if (Value >=1 && Value <= 64)
-	{
-		pAd->CommonCfg.REGBACapability.field.RxBAWinLimit = Value;
-		pAd->CommonCfg.BACapability.field.RxBAWinLimit = Value;
-	}
-	else
-	{
-        pAd->CommonCfg.REGBACapability.field.RxBAWinLimit = 64;
-		pAd->CommonCfg.BACapability.field.RxBAWinLimit = 64;
-	}
-
-	SetCommonHT(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtBaWinSize_Proc::(HtBaWinSize=%d)\n",pAd->CommonCfg.BACapability.field.RxBAWinLimit));
-
-	return TRUE;
-}
-
-INT	Set_HtRdg_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-
-	if (Value == 0)
-		pAd->CommonCfg.bRdg = FALSE;
-	else if ( Value ==1 )
-	{
-		pAd->HTCEnable = TRUE;
-        	pAd->CommonCfg.bRdg = TRUE;
-	}
-	else
-		return FALSE; //Invalid argument
-
-	SetCommonHT(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtRdg_Proc::(HtRdg=%d)\n",pAd->CommonCfg.bRdg));
-
-	return TRUE;
-}
-
-INT	Set_HtLinkAdapt_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-	if (Value == 0)
-		pAd->bLinkAdapt = FALSE;
-	else if ( Value ==1 )
-	{
-			pAd->HTCEnable = TRUE;
-			pAd->bLinkAdapt = TRUE;
-	}
-	else
-		return FALSE; //Invalid argument
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtLinkAdapt_Proc::(HtLinkAdapt=%d)\n",pAd->bLinkAdapt));
-
-	return TRUE;
-}
-
-INT	Set_HtAmsdu_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-	if (Value == 0)
-		pAd->CommonCfg.BACapability.field.AmsduEnable = FALSE;
-	else if ( Value == 1 )
-        pAd->CommonCfg.BACapability.field.AmsduEnable = TRUE;
-	else
-		return FALSE; //Invalid argument
-
-	SetCommonHT(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtAmsdu_Proc::(HtAmsdu=%d)\n",pAd->CommonCfg.BACapability.field.AmsduEnable));
-
-	return TRUE;
-}
-
-INT	Set_HtAutoBa_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-	if (Value == 0)
-		pAd->CommonCfg.BACapability.field.AutoBA = FALSE;
-    else if (Value == 1)
-		pAd->CommonCfg.BACapability.field.AutoBA = TRUE;
-	else
-		return FALSE; //Invalid argument
-
-    pAd->CommonCfg.REGBACapability.field.AutoBA = pAd->CommonCfg.BACapability.field.AutoBA;
-	SetCommonHT(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtAutoBa_Proc::(HtAutoBa=%d)\n",pAd->CommonCfg.BACapability.field.AutoBA));
-
-	return TRUE;
-
-}
-
-INT	Set_HtProtect_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-	if (Value == 0)
-		pAd->CommonCfg.bHTProtect = FALSE;
-    else if (Value == 1)
-		pAd->CommonCfg.bHTProtect = TRUE;
-	else
-		return FALSE; //Invalid argument
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtProtect_Proc::(HtProtect=%d)\n",pAd->CommonCfg.bHTProtect));
-
-	return TRUE;
-}
-
-INT	Set_SendPSMPAction_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-    UCHAR mac[6], mode;
-	char *token, sepValue[] = ":", DASH = '-';
-	INT i;
-    MAC_TABLE_ENTRY *pEntry;
-
-    //printk("\n%s\n", arg);
-/*
-	The BARecTearDown inupt string format should be xx:xx:xx:xx:xx:xx-d,
-		=>The six 2 digit hex-decimal number previous are the Mac address,
-		=>The seventh decimal number is the mode value.
-*/
-    if(strlen(arg) < 19)  //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and mode value in decimal format.
-		return FALSE;
-
-   	token = strchr(arg, DASH);
-	if ((token != NULL) && (strlen(token)>1))
-	{
-		mode = simple_strtol((token+1), 0, 10);
-		if (mode > MMPS_ENABLE)
-			return FALSE;
-
-		*token = '\0';
-		for (i = 0, token = rstrtok(arg, &sepValue[0]); token; token = rstrtok(NULL, &sepValue[0]), i++)
-		{
-			if((strlen(token) != 2) || (!isxdigit(*token)) || (!isxdigit(*(token+1))))
-				return FALSE;
-			AtoH(token, (PUCHAR)(&mac[i]), 1);
-		}
-		if(i != 6)
-			return FALSE;
-
-		printk("\n%02x:%02x:%02x:%02x:%02x:%02x-%02x", mac[0], mac[1],
-		       mac[2], mac[3], mac[4], mac[5], mode);
-
-		pEntry = MacTableLookup(pAd, mac);
-
-		if (pEntry) {
-		    printk("\nSendPSMPAction MIPS mode = %d\n", mode);
-		    SendPSMPAction(pAd, pEntry->Aid, mode);
-		}
-
-		return TRUE;
-	}
-
-	return FALSE;
-
-
-}
-
-INT	Set_HtMIMOPSmode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-
-	if (Value <=3 && Value >= 0)
-		pAd->CommonCfg.BACapability.field.MMPSmode = Value;
-	else
-		pAd->CommonCfg.BACapability.field.MMPSmode = 3;
-
-	SetCommonHT(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMIMOPSmode_Proc::(MIMOPS mode=%d)\n",pAd->CommonCfg.BACapability.field.MMPSmode));
-
-	return TRUE;
-}
-
-
-INT	Set_ForceShortGI_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-	if (Value == 0)
-		pAd->WIFItestbed.bShortGI = FALSE;
-	else if (Value == 1)
-		pAd->WIFItestbed.bShortGI = TRUE;
-	else
-		return FALSE; //Invalid argument
-
-	SetCommonHT(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_ForceShortGI_Proc::(ForceShortGI=%d)\n", pAd->WIFItestbed.bShortGI));
-
-	return TRUE;
-}
-
-
-
-INT	Set_ForceGF_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-	if (Value == 0)
-		pAd->WIFItestbed.bGreenField = FALSE;
-	else if (Value == 1)
-		pAd->WIFItestbed.bGreenField = TRUE;
-	else
-		return FALSE; //Invalid argument
-
-	SetCommonHT(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_ForceGF_Proc::(ForceGF=%d)\n", pAd->WIFItestbed.bGreenField));
-
-	return TRUE;
-}
-
-INT	Set_HtMimoPs_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-	if (Value == 0)
-		pAd->CommonCfg.bMIMOPSEnable = FALSE;
-	else if (Value == 1)
-		pAd->CommonCfg.bMIMOPSEnable = TRUE;
-	else
-		return FALSE; //Invalid argument
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMimoPs_Proc::(HtMimoPs=%d)\n",pAd->CommonCfg.bMIMOPSEnable));
-
-	return TRUE;
-}
-#endif // DOT11_N_SUPPORT //
-
-
-#ifdef DOT11_N_SUPPORT
-INT	SetCommonHT(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	OID_SET_HT_PHYMODE		SetHT;
-
-	if (pAd->CommonCfg.PhyMode < PHY_11ABGN_MIXED)
-		return FALSE;
-
-	SetHT.PhyMode = pAd->CommonCfg.PhyMode;
-	SetHT.TransmitNo = ((UCHAR)pAd->Antenna.field.TxPath);
-	SetHT.HtMode = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.HTMODE;
-	SetHT.ExtOffset = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.EXTCHA;
-	SetHT.MCS = MCS_AUTO;
-	SetHT.BW = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.BW;
-	SetHT.STBC = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.STBC;
-	SetHT.SHORTGI = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.ShortGI;
-
-	RTMPSetHT(pAd, &SetHT);
-
-	return TRUE;
-}
-#endif // DOT11_N_SUPPORT //
-
-INT	Set_FixedTxMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UCHAR	fix_tx_mode = FIXED_TXMODE_HT;
-
-	if (strcmp(arg, "OFDM") == 0 || strcmp(arg, "ofdm") == 0)
-	{
-		fix_tx_mode = FIXED_TXMODE_OFDM;
-	}
-	else if (strcmp(arg, "CCK") == 0 || strcmp(arg, "cck") == 0)
-	{
-        fix_tx_mode = FIXED_TXMODE_CCK;
-	}
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode = fix_tx_mode;
-#endif // CONFIG_STA_SUPPORT //
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_FixedTxMode_Proc::(FixedTxMode=%d)\n", fix_tx_mode));
-
-	return TRUE;
-}
-
-#ifdef CONFIG_APSTA_MIXED_SUPPORT
-INT	Set_OpMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-
-#ifdef RT2870
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP))
-#endif // RT2870 //
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("Can not switch operate mode on interface up !! \n"));
-		return FALSE;
-	}
-
-	if (Value == 0)
-		pAd->OpMode = OPMODE_STA;
-	else if (Value == 1)
-		pAd->OpMode = OPMODE_AP;
-	else
-		return FALSE; //Invalid argument
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_OpMode_Proc::(OpMode=%s)\n", pAd->OpMode == 1 ? "AP Mode" : "STA Mode"));
-
-	return TRUE;
-}
-#endif // CONFIG_APSTA_MIXED_SUPPORT //
-
-
-/////////////////////////////////////////////////////////////////////////
-PCHAR   RTMPGetRalinkAuthModeStr(
-    IN  NDIS_802_11_AUTHENTICATION_MODE authMode)
-{
-	switch(authMode)
-	{
-		case Ndis802_11AuthModeOpen:
-			return "OPEN";
-		case Ndis802_11AuthModeWPAPSK:
-			return "WPAPSK";
-		case Ndis802_11AuthModeShared:
-			return "SHARED";
-		case Ndis802_11AuthModeWPA:
-			return "WPA";
-		case Ndis802_11AuthModeWPA2:
-			return "WPA2";
-		case Ndis802_11AuthModeWPA2PSK:
-			return "WPA2PSK";
-        case Ndis802_11AuthModeWPA1PSKWPA2PSK:
-			return "WPAPSKWPA2PSK";
-        case Ndis802_11AuthModeWPA1WPA2:
-			return "WPA1WPA2";
-		case Ndis802_11AuthModeWPANone:
-			return "WPANONE";
-		default:
-			return "UNKNOW";
-	}
-}
-
-PCHAR   RTMPGetRalinkEncryModeStr(
-    IN  USHORT encryMode)
-{
-	switch(encryMode)
-	{
-		case Ndis802_11WEPDisabled:
-			return "NONE";
-		case Ndis802_11WEPEnabled:
-			return "WEP";
-		case Ndis802_11Encryption2Enabled:
-			return "TKIP";
-		case Ndis802_11Encryption3Enabled:
-			return "AES";
-        case Ndis802_11Encryption4Enabled:
-			return "TKIPAES";
-		default:
-			return "UNKNOW";
-	}
-}
-
-INT RTMPShowCfgValue(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pName,
-	IN	PUCHAR			pBuf)
-{
-	INT	Status = 0;
-
-	for (PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC = RTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC++)
-	{
-		if (!strcmp(pName, PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name))
-		{
-			if(PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->show_proc(pAd, pBuf))
-				Status = -EINVAL;
-			break;  //Exit for loop.
-		}
-	}
-
-	if(PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name == NULL)
-	{
-		sprintf(pBuf, "\n");
-		for (PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC = RTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC++)
-			sprintf(pBuf, "%s%s\n", pBuf, PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name);
-	}
-
-	return Status;
-}
-
-INT	Show_SSID_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		sprintf(pBuf, "\t%s", pAd->CommonCfg.Ssid);
-#endif // CONFIG_STA_SUPPORT //
-	return 0;
-}
-
-INT	Show_WirelessMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	switch(pAd->CommonCfg.PhyMode)
-	{
-		case PHY_11BG_MIXED:
-			sprintf(pBuf, "\t11B/G");
-			break;
-		case PHY_11B:
-			sprintf(pBuf, "\t11B");
-			break;
-		case PHY_11A:
-			sprintf(pBuf, "\t11A");
-			break;
-		case PHY_11ABG_MIXED:
-			sprintf(pBuf, "\t11A/B/G");
-			break;
-		case PHY_11G:
-			sprintf(pBuf, "\t11G");
-			break;
-#ifdef DOT11_N_SUPPORT
-		case PHY_11ABGN_MIXED:
-			sprintf(pBuf, "\t11A/B/G/N");
-			break;
-		case PHY_11N_2_4G:
-			sprintf(pBuf, "\t11N only with 2.4G");
-			break;
-		case PHY_11GN_MIXED:
-			sprintf(pBuf, "\t11G/N");
-			break;
-		case PHY_11AN_MIXED:
-			sprintf(pBuf, "\t11A/N");
-			break;
-		case PHY_11BGN_MIXED:
-			sprintf(pBuf, "\t11B/G/N");
-			break;
-		case PHY_11AGN_MIXED:
-			sprintf(pBuf, "\t11A/G/N");
-			break;
-		case PHY_11N_5G:
-			sprintf(pBuf, "\t11N only with 5G");
-			break;
-#endif // DOT11_N_SUPPORT //
-		default:
-			sprintf(pBuf, "\tUnknow Value(%d)", pAd->CommonCfg.PhyMode);
-			break;
-	}
-	return 0;
-}
-
-
-INT	Show_TxBurst_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%s", pAd->CommonCfg.bEnableTxBurst ? "TRUE":"FALSE");
-	return 0;
-}
-
-INT	Show_TxPreamble_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	switch(pAd->CommonCfg.TxPreamble)
-	{
-		case Rt802_11PreambleShort:
-			sprintf(pBuf, "\tShort");
-			break;
-		case Rt802_11PreambleLong:
-			sprintf(pBuf, "\tLong");
-			break;
-		case Rt802_11PreambleAuto:
-			sprintf(pBuf, "\tAuto");
-			break;
-		default:
-			sprintf(pBuf, "\tUnknow Value(%lu)", pAd->CommonCfg.TxPreamble);
-			break;
-	}
-
-	return 0;
-}
-
-INT	Show_TxPower_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%lu", pAd->CommonCfg.TxPowerPercentage);
-	return 0;
-}
-
-INT	Show_Channel_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%d", pAd->CommonCfg.Channel);
-	return 0;
-}
-
-INT	Show_BGProtection_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	switch(pAd->CommonCfg.UseBGProtection)
-	{
-		case 1: //Always On
-			sprintf(pBuf, "\tON");
-			break;
-		case 2: //Always OFF
-			sprintf(pBuf, "\tOFF");
-			break;
-		case 0: //AUTO
-			sprintf(pBuf, "\tAuto");
-			break;
-		default:
-			sprintf(pBuf, "\tUnknow Value(%lu)", pAd->CommonCfg.UseBGProtection);
-			break;
-	}
-	return 0;
-}
-
-INT	Show_RTSThreshold_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%u", pAd->CommonCfg.RtsThreshold);
-	return 0;
-}
-
-INT	Show_FragThreshold_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%u", pAd->CommonCfg.FragmentThreshold);
-	return 0;
-}
-
-#ifdef DOT11_N_SUPPORT
-INT	Show_HtBw_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	if (pAd->CommonCfg.RegTransmitSetting.field.BW == BW_40)
-	{
-		sprintf(pBuf, "\t40 MHz");
-	}
-	else
-	{
-        sprintf(pBuf, "\t20 MHz");
-	}
-	return 0;
-}
-
-INT	Show_HtMcs_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		sprintf(pBuf, "\t%u", pAd->StaCfg.DesiredTransmitSetting.field.MCS);
-#endif // CONFIG_STA_SUPPORT //
-	return 0;
-}
-
-INT	Show_HtGi_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	switch(pAd->CommonCfg.RegTransmitSetting.field.ShortGI)
-	{
-		case GI_400:
-			sprintf(pBuf, "\tGI_400");
-			break;
-		case GI_800:
-			sprintf(pBuf, "\tGI_800");
-			break;
-		default:
-			sprintf(pBuf, "\tUnknow Value(%u)", pAd->CommonCfg.RegTransmitSetting.field.ShortGI);
-			break;
-	}
-	return 0;
-}
-
-INT	Show_HtOpMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	switch(pAd->CommonCfg.RegTransmitSetting.field.HTMODE)
-	{
-		case HTMODE_GF:
-			sprintf(pBuf, "\tGF");
-			break;
-		case HTMODE_MM:
-			sprintf(pBuf, "\tMM");
-			break;
-		default:
-			sprintf(pBuf, "\tUnknow Value(%u)", pAd->CommonCfg.RegTransmitSetting.field.HTMODE);
-			break;
-	}
-	return 0;
-}
-
-INT	Show_HtExtcha_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	switch(pAd->CommonCfg.RegTransmitSetting.field.EXTCHA)
-	{
-		case EXTCHA_BELOW:
-			sprintf(pBuf, "\tBelow");
-			break;
-		case EXTCHA_ABOVE:
-			sprintf(pBuf, "\tAbove");
-			break;
-		default:
-			sprintf(pBuf, "\tUnknow Value(%u)", pAd->CommonCfg.RegTransmitSetting.field.EXTCHA);
-			break;
-	}
-	return 0;
-}
-
-
-INT	Show_HtMpduDensity_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%u", pAd->CommonCfg.BACapability.field.MpduDensity);
-	return 0;
-}
-
-INT	Show_HtBaWinSize_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%u", pAd->CommonCfg.BACapability.field.RxBAWinLimit);
-	return 0;
-}
-
-INT	Show_HtRdg_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%s", pAd->CommonCfg.bRdg ? "TRUE":"FALSE");
-	return 0;
-}
-
-INT	Show_HtAmsdu_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%s", pAd->CommonCfg.BACapability.field.AmsduEnable ? "TRUE":"FALSE");
-	return 0;
-}
-
-INT	Show_HtAutoBa_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%s", pAd->CommonCfg.BACapability.field.AutoBA ? "TRUE":"FALSE");
-	return 0;
-}
-#endif // DOT11_N_SUPPORT //
-
-INT	Show_CountryRegion_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%d", pAd->CommonCfg.CountryRegion);
-	return 0;
-}
-
-INT	Show_CountryRegionABand_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%d", pAd->CommonCfg.CountryRegionForABand);
-	return 0;
-}
-
-INT	Show_CountryCode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%s", pAd->CommonCfg.CountryCode);
-	return 0;
-}
-
-#ifdef AGGREGATION_SUPPORT
-INT	Show_PktAggregate_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%s", pAd->CommonCfg.bAggregationCapable ? "TRUE":"FALSE");
-	return 0;
-}
-#endif // AGGREGATION_SUPPORT //
-
-#ifdef WMM_SUPPORT
-INT	Show_WmmCapable_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		sprintf(pBuf, "\t%s", pAd->CommonCfg.bWmmCapable ? "TRUE":"FALSE");
-#endif // CONFIG_STA_SUPPORT //
-
-	return 0;
-}
-#endif // WMM_SUPPORT //
-
-INT	Show_IEEE80211H_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%s", pAd->CommonCfg.bIEEE80211H ? "TRUE":"FALSE");
-	return 0;
-}
-
-#ifdef CONFIG_STA_SUPPORT
-INT	Show_NetworkType_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	switch(pAd->StaCfg.BssType)
-	{
-		case BSS_ADHOC:
-			sprintf(pBuf, "\tAdhoc");
-			break;
-		case BSS_INFRA:
-			sprintf(pBuf, "\tInfra");
-			break;
-		case BSS_ANY:
-			sprintf(pBuf, "\tAny");
-			break;
-		case BSS_MONITOR:
-			sprintf(pBuf, "\tMonitor");
-			break;
-		default:
-			sprintf(pBuf, "\tUnknow Value(%d)", pAd->StaCfg.BssType);
-			break;
-	}
-	return 0;
-}
-#endif // CONFIG_STA_SUPPORT //
-
-INT	Show_AuthMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	NDIS_802_11_AUTHENTICATION_MODE	AuthMode = Ndis802_11AuthModeOpen;
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		AuthMode = pAd->StaCfg.AuthMode;
-#endif // CONFIG_STA_SUPPORT //
-
-	if ((AuthMode >= Ndis802_11AuthModeOpen) &&
-		(AuthMode <= Ndis802_11AuthModeWPA1PSKWPA2PSK))
-		sprintf(pBuf, "\t%s", RTMPGetRalinkAuthModeStr(AuthMode));
-	else
-		sprintf(pBuf, "\tUnknow Value(%d)", AuthMode);
-
-	return 0;
-}
-
-INT	Show_EncrypType_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	NDIS_802_11_WEP_STATUS	WepStatus = Ndis802_11WEPDisabled;
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		WepStatus = pAd->StaCfg.WepStatus;
-#endif // CONFIG_STA_SUPPORT //
-
-	if ((WepStatus >= Ndis802_11WEPEnabled) &&
-		(WepStatus <= Ndis802_11Encryption4KeyAbsent))
-		sprintf(pBuf, "\t%s", RTMPGetRalinkEncryModeStr(WepStatus));
-	else
-		sprintf(pBuf, "\tUnknow Value(%d)", WepStatus);
-
-	return 0;
-}
-
-INT	Show_DefaultKeyID_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	UCHAR DefaultKeyId = 0;
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		DefaultKeyId = pAd->StaCfg.DefaultKeyId;
-#endif // CONFIG_STA_SUPPORT //
-
-	sprintf(pBuf, "\t%d", DefaultKeyId);
-
-	return 0;
-}
-
-INT	Show_WepKey_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN  INT				KeyIdx,
-	OUT	PUCHAR			pBuf)
-{
-	UCHAR   Key[16] = {0}, KeyLength = 0;
-	INT		index = BSS0;
-
-	KeyLength = pAd->SharedKey[index][KeyIdx].KeyLen;
-	NdisMoveMemory(Key, pAd->SharedKey[index][KeyIdx].Key, KeyLength);
-
-	//check key string is ASCII or not
-    if (RTMPCheckStrPrintAble(Key, KeyLength))
-        sprintf(pBuf, "\t%s", Key);
-    else
-    {
-        int idx;
-        sprintf(pBuf, "\t");
-        for (idx = 0; idx < KeyLength; idx++)
-            sprintf(pBuf+strlen(pBuf), "%02X", Key[idx]);
-    }
-	return 0;
-}
-
-INT	Show_Key1_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	Show_WepKey_Proc(pAd, 0, pBuf);
-	return 0;
-}
-
-INT	Show_Key2_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	Show_WepKey_Proc(pAd, 1, pBuf);
-	return 0;
-}
-
-INT	Show_Key3_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	Show_WepKey_Proc(pAd, 2, pBuf);
-	return 0;
-}
-
-INT	Show_Key4_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	Show_WepKey_Proc(pAd, 3, pBuf);
-	return 0;
-}
-
-INT	Show_WPAPSK_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	INT 	idx;
-	UCHAR	PMK[32] = {0};
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		NdisMoveMemory(PMK, pAd->StaCfg.PMK, 32);
-#endif // CONFIG_STA_SUPPORT //
-
-    sprintf(pBuf, "\tPMK = ");
-    for (idx = 0; idx < 32; idx++)
-        sprintf(pBuf+strlen(pBuf), "%02X", PMK[idx]);
-
-	return 0;
-}
-
+#include "../../rt2860/common/cmm_info.c"
diff --git a/drivers/staging/rt2870/common/cmm_sanity.c b/drivers/staging/rt2870/common/cmm_sanity.c
index 1e24320177b..cb3352118c5 100644
--- a/drivers/staging/rt2870/common/cmm_sanity.c
+++ b/drivers/staging/rt2870/common/cmm_sanity.c
@@ -1,1663 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	sanity.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	John Chang  2004-09-01      add WMM support
-*/
-#include "../rt_config.h"
-
-
-extern UCHAR	CISCO_OUI[];
-
-extern UCHAR	WPA_OUI[];
-extern UCHAR	RSN_OUI[];
-extern UCHAR	WME_INFO_ELEM[];
-extern UCHAR	WME_PARM_ELEM[];
-extern UCHAR	Ccx2QosInfo[];
-extern UCHAR	RALINK_OUI[];
-extern UCHAR	BROADCOM_OUI[];
-extern UCHAR    WPS_OUI[];
-
-/*
-    ==========================================================================
-    Description:
-        MLME message sanity check
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-BOOLEAN MlmeAddBAReqSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pAddr2)
-{
-    PMLME_ADDBA_REQ_STRUCT   pInfo;
-
-    pInfo = (MLME_ADDBA_REQ_STRUCT *)Msg;
-
-    if ((MsgLen != sizeof(MLME_ADDBA_REQ_STRUCT)))
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("MlmeAddBAReqSanity fail - message lenght not correct.\n"));
-        return FALSE;
-    }
-
-    if ((pInfo->Wcid >= MAX_LEN_OF_MAC_TABLE))
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("MlmeAddBAReqSanity fail - The peer Mac is not associated yet.\n"));
-        return FALSE;
-    }
-
-	/*
-    if ((pInfo->BaBufSize > MAX_RX_REORDERBUF) || (pInfo->BaBufSize < 2))
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("MlmeAddBAReqSanity fail - Rx Reordering buffer too big or too small\n"));
-        return FALSE;
-    }
-	*/
-
-    if ((pInfo->pAddr[0]&0x01) == 0x01)
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("MlmeAddBAReqSanity fail - broadcast address not support BA\n"));
-        return FALSE;
-    }
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        MLME message sanity check
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-BOOLEAN MlmeDelBAReqSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen)
-{
-	MLME_DELBA_REQ_STRUCT *pInfo;
-	pInfo = (MLME_DELBA_REQ_STRUCT *)Msg;
-
-    if ((MsgLen != sizeof(MLME_DELBA_REQ_STRUCT)))
-    {
-        DBGPRINT(RT_DEBUG_ERROR, ("MlmeDelBAReqSanity fail - message lenght not correct.\n"));
-        return FALSE;
-    }
-
-    if ((pInfo->Wcid >= MAX_LEN_OF_MAC_TABLE))
-    {
-        DBGPRINT(RT_DEBUG_ERROR, ("MlmeDelBAReqSanity fail - The peer Mac is not associated yet.\n"));
-        return FALSE;
-    }
-
-    if ((pInfo->TID & 0xf0))
-    {
-        DBGPRINT(RT_DEBUG_ERROR, ("MlmeDelBAReqSanity fail - The peer TID is incorrect.\n"));
-        return FALSE;
-    }
-
-	if (NdisEqualMemory(pAd->MacTab.Content[pInfo->Wcid].Addr, pInfo->Addr, MAC_ADDR_LEN) == 0)
-    {
-        DBGPRINT(RT_DEBUG_ERROR, ("MlmeDelBAReqSanity fail - the peer addr dosen't exist.\n"));
-        return FALSE;
-    }
-
-    return TRUE;
-}
-
-BOOLEAN PeerAddBAReqActionSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *pMsg,
-    IN ULONG MsgLen,
-	OUT PUCHAR pAddr2)
-{
-	PFRAME_802_11 pFrame = (PFRAME_802_11)pMsg;
-	PFRAME_ADDBA_REQ pAddFrame;
-	pAddFrame = (PFRAME_ADDBA_REQ)(pMsg);
-	if (MsgLen < (sizeof(FRAME_ADDBA_REQ)))
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("PeerAddBAReqActionSanity: ADDBA Request frame length size = %ld incorrect\n", MsgLen));
-		return FALSE;
-	}
-	// we support immediate BA.
-	*(USHORT *)(&pAddFrame->BaParm) = cpu2le16(*(USHORT *)(&pAddFrame->BaParm));
-	pAddFrame->TimeOutValue = cpu2le16(pAddFrame->TimeOutValue);
-	pAddFrame->BaStartSeq.word = cpu2le16(pAddFrame->BaStartSeq.word);
-
-	if (pAddFrame->BaParm.BAPolicy != IMMED_BA)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("PeerAddBAReqActionSanity: ADDBA Request Ba Policy[%d] not support\n", pAddFrame->BaParm.BAPolicy));
-		DBGPRINT(RT_DEBUG_ERROR,("ADDBA Request. tid=%x, Bufsize=%x, AMSDUSupported=%x \n", pAddFrame->BaParm.TID, pAddFrame->BaParm.BufSize, pAddFrame->BaParm.AMSDUSupported));
-		return FALSE;
-	}
-
-	// we support immediate BA.
-	if (pAddFrame->BaParm.TID &0xfff0)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("PeerAddBAReqActionSanity: ADDBA Request incorrect TID = %d\n", pAddFrame->BaParm.TID));
-		return FALSE;
-	}
-	COPY_MAC_ADDR(pAddr2, pFrame->Hdr.Addr2);
-	return TRUE;
-}
-
-BOOLEAN PeerAddBARspActionSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *pMsg,
-    IN ULONG MsgLen)
-{
-	//PFRAME_802_11 pFrame = (PFRAME_802_11)pMsg;
-	PFRAME_ADDBA_RSP pAddFrame;
-
-	pAddFrame = (PFRAME_ADDBA_RSP)(pMsg);
-	if (MsgLen < (sizeof(FRAME_ADDBA_RSP)))
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("PeerAddBARspActionSanity: ADDBA Response frame length size = %ld incorrect\n", MsgLen));
-		return FALSE;
-	}
-	// we support immediate BA.
-	*(USHORT *)(&pAddFrame->BaParm) = cpu2le16(*(USHORT *)(&pAddFrame->BaParm));
-	pAddFrame->StatusCode = cpu2le16(pAddFrame->StatusCode);
-	pAddFrame->TimeOutValue = cpu2le16(pAddFrame->TimeOutValue);
-
-	if (pAddFrame->BaParm.BAPolicy != IMMED_BA)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("PeerAddBAReqActionSanity: ADDBA Response Ba Policy[%d] not support\n", pAddFrame->BaParm.BAPolicy));
-		return FALSE;
-	}
-
-	// we support immediate BA.
-	if (pAddFrame->BaParm.TID &0xfff0)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("PeerAddBARspActionSanity: ADDBA Response incorrect TID = %d\n", pAddFrame->BaParm.TID));
-		return FALSE;
-	}
-	return TRUE;
-
-}
-
-BOOLEAN PeerDelBAActionSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN UCHAR Wcid,
-    IN VOID *pMsg,
-    IN ULONG MsgLen )
-{
-	//PFRAME_802_11 pFrame = (PFRAME_802_11)pMsg;
-	PFRAME_DELBA_REQ  pDelFrame;
-	if (MsgLen != (sizeof(FRAME_DELBA_REQ)))
-		return FALSE;
-
-	if (Wcid >= MAX_LEN_OF_MAC_TABLE)
-		return FALSE;
-
-	pDelFrame = (PFRAME_DELBA_REQ)(pMsg);
-
-	*(USHORT *)(&pDelFrame->DelbaParm) = cpu2le16(*(USHORT *)(&pDelFrame->DelbaParm));
-	pDelFrame->ReasonCode = cpu2le16(pDelFrame->ReasonCode);
-
-	if (pDelFrame->DelbaParm.TID &0xfff0)
-		return FALSE;
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        MLME message sanity check
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-BOOLEAN PeerBeaconAndProbeRspSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    IN UCHAR  MsgChannel,
-    OUT PUCHAR pAddr2,
-    OUT PUCHAR pBssid,
-    OUT CHAR Ssid[],
-    OUT UCHAR *pSsidLen,
-    OUT UCHAR *pBssType,
-    OUT USHORT *pBeaconPeriod,
-    OUT UCHAR *pChannel,
-    OUT UCHAR *pNewChannel,
-    OUT LARGE_INTEGER *pTimestamp,
-    OUT CF_PARM *pCfParm,
-    OUT USHORT *pAtimWin,
-    OUT USHORT *pCapabilityInfo,
-    OUT UCHAR *pErp,
-    OUT UCHAR *pDtimCount,
-    OUT UCHAR *pDtimPeriod,
-    OUT UCHAR *pBcastFlag,
-    OUT UCHAR *pMessageToMe,
-    OUT UCHAR SupRate[],
-    OUT UCHAR *pSupRateLen,
-    OUT UCHAR ExtRate[],
-    OUT UCHAR *pExtRateLen,
-    OUT	UCHAR *pCkipFlag,
-    OUT	UCHAR *pAironetCellPowerLimit,
-    OUT PEDCA_PARM       pEdcaParm,
-    OUT PQBSS_LOAD_PARM  pQbssLoad,
-    OUT PQOS_CAPABILITY_PARM pQosCapability,
-    OUT ULONG *pRalinkIe,
-    OUT UCHAR		 *pHtCapabilityLen,
-#ifdef CONFIG_STA_SUPPORT
-    OUT UCHAR		 *pPreNHtCapabilityLen,
-#endif // CONFIG_STA_SUPPORT //
-    OUT HT_CAPABILITY_IE *pHtCapability,
-	OUT UCHAR		 *AddHtInfoLen,
-	OUT ADD_HT_INFO_IE *AddHtInfo,
-	OUT UCHAR *NewExtChannelOffset,		// Ht extension channel offset(above or below)
-    OUT USHORT *LengthVIE,
-    OUT	PNDIS_802_11_VARIABLE_IEs pVIE)
-{
-    CHAR				*Ptr;
-#ifdef CONFIG_STA_SUPPORT
-	CHAR 				TimLen;
-#endif // CONFIG_STA_SUPPORT //
-    PFRAME_802_11		pFrame;
-    PEID_STRUCT         pEid;
-    UCHAR				SubType;
-    UCHAR				Sanity;
-    //UCHAR				ECWMin, ECWMax;
-    //MAC_CSR9_STRUC		Csr9;
-    ULONG				Length = 0;
-
-	// For some 11a AP which didn't have DS_IE, we use two conditions to decide the channel
-	//	1. If the AP is 11n enabled, then check the control channel.
-	//	2. If the AP didn't have any info about channel, use the channel we received this frame as the channel. (May inaccuracy!!)
-	UCHAR			CtrlChannel = 0;
-
-    // Add for 3 necessary EID field check
-    Sanity = 0;
-
-    *pAtimWin = 0;
-    *pErp = 0;
-    *pDtimCount = 0;
-    *pDtimPeriod = 0;
-    *pBcastFlag = 0;
-    *pMessageToMe = 0;
-    *pExtRateLen = 0;
-    *pCkipFlag = 0;			        // Default of CkipFlag is 0
-    *pAironetCellPowerLimit = 0xFF;  // Default of AironetCellPowerLimit is 0xFF
-    *LengthVIE = 0;					// Set the length of VIE to init value 0
-    *pHtCapabilityLen = 0;					// Set the length of VIE to init value 0
-#ifdef CONFIG_STA_SUPPORT
-	if (pAd->OpMode == OPMODE_STA)
-		*pPreNHtCapabilityLen = 0;					// Set the length of VIE to init value 0
-#endif // CONFIG_STA_SUPPORT //
-    *AddHtInfoLen = 0;					// Set the length of VIE to init value 0
-    *pRalinkIe = 0;
-    *pNewChannel = 0;
-    *NewExtChannelOffset = 0xff;	//Default 0xff means no such IE
-    pCfParm->bValid = FALSE;        // default: no IE_CF found
-    pQbssLoad->bValid = FALSE;      // default: no IE_QBSS_LOAD found
-    pEdcaParm->bValid = FALSE;      // default: no IE_EDCA_PARAMETER found
-    pQosCapability->bValid = FALSE; // default: no IE_QOS_CAPABILITY found
-
-    pFrame = (PFRAME_802_11)Msg;
-
-    // get subtype from header
-    SubType = (UCHAR)pFrame->Hdr.FC.SubType;
-
-    // get Addr2 and BSSID from header
-    COPY_MAC_ADDR(pAddr2, pFrame->Hdr.Addr2);
-    COPY_MAC_ADDR(pBssid, pFrame->Hdr.Addr3);
-
-//	hex_dump("Beacon", Msg, MsgLen);
-
-    Ptr = pFrame->Octet;
-    Length += LENGTH_802_11;
-
-    // get timestamp from payload and advance the pointer
-    NdisMoveMemory(pTimestamp, Ptr, TIMESTAMP_LEN);
-
-	pTimestamp->u.LowPart = cpu2le32(pTimestamp->u.LowPart);
-	pTimestamp->u.HighPart = cpu2le32(pTimestamp->u.HighPart);
-
-    Ptr += TIMESTAMP_LEN;
-    Length += TIMESTAMP_LEN;
-
-    // get beacon interval from payload and advance the pointer
-    NdisMoveMemory(pBeaconPeriod, Ptr, 2);
-    Ptr += 2;
-    Length += 2;
-
-    // get capability info from payload and advance the pointer
-    NdisMoveMemory(pCapabilityInfo, Ptr, 2);
-    Ptr += 2;
-    Length += 2;
-
-    if (CAP_IS_ESS_ON(*pCapabilityInfo))
-        *pBssType = BSS_INFRA;
-    else
-        *pBssType = BSS_ADHOC;
-
-    pEid = (PEID_STRUCT) Ptr;
-
-    // get variable fields from payload and advance the pointer
-    while ((Length + 2 + pEid->Len) <= MsgLen)
-    {
-        //
-        // Secure copy VIE to VarIE[MAX_VIE_LEN] didn't overflow.
-        //
-        if ((*LengthVIE + pEid->Len + 2) >= MAX_VIE_LEN)
-        {
-            DBGPRINT(RT_DEBUG_WARN, ("PeerBeaconAndProbeRspSanity - Variable IEs out of resource [len(=%d) > MAX_VIE_LEN(=%d)]\n",
-                    (*LengthVIE + pEid->Len + 2), MAX_VIE_LEN));
-            break;
-        }
-
-        switch(pEid->Eid)
-        {
-            case IE_SSID:
-                // Already has one SSID EID in this beacon, ignore the second one
-                if (Sanity & 0x1)
-                    break;
-                if(pEid->Len <= MAX_LEN_OF_SSID)
-                {
-                    NdisMoveMemory(Ssid, pEid->Octet, pEid->Len);
-                    *pSsidLen = pEid->Len;
-                    Sanity |= 0x1;
-                }
-                else
-                {
-                    DBGPRINT(RT_DEBUG_TRACE, ("PeerBeaconAndProbeRspSanity - wrong IE_SSID (len=%d)\n",pEid->Len));
-                    return FALSE;
-                }
-                break;
-
-            case IE_SUPP_RATES:
-                if(pEid->Len <= MAX_LEN_OF_SUPPORTED_RATES)
-                {
-                    Sanity |= 0x2;
-                    NdisMoveMemory(SupRate, pEid->Octet, pEid->Len);
-                    *pSupRateLen = pEid->Len;
-
-                    // TODO: 2004-09-14 not a good design here, cause it exclude extra rates
-                    // from ScanTab. We should report as is. And filter out unsupported
-                    // rates in MlmeAux.
-                    // Check against the supported rates
-                    // RTMPCheckRates(pAd, SupRate, pSupRateLen);
-                }
-                else
-                {
-                    DBGPRINT(RT_DEBUG_TRACE, ("PeerBeaconAndProbeRspSanity - wrong IE_SUPP_RATES (len=%d)\n",pEid->Len));
-                    return FALSE;
-                }
-                break;
-
-            case IE_HT_CAP:
-			if (pEid->Len >= SIZE_HT_CAP_IE)  //Note: allow extension.!!
-			{
-				NdisMoveMemory(pHtCapability, pEid->Octet, sizeof(HT_CAPABILITY_IE));
-				*pHtCapabilityLen = SIZE_HT_CAP_IE;	// Nnow we only support 26 bytes.
-
-				*(USHORT *)(&pHtCapability->HtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->HtCapInfo));
-				*(USHORT *)(&pHtCapability->ExtHtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->ExtHtCapInfo));
-
-#ifdef CONFIG_STA_SUPPORT
-				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				{
-					*pPreNHtCapabilityLen = 0;	// Nnow we only support 26 bytes.
-
-					Ptr = (PUCHAR) pVIE;
-					NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid, pEid->Len + 2);
-					*LengthVIE += (pEid->Len + 2);
-				}
-#endif // CONFIG_STA_SUPPORT //
-			}
-			else
-			{
-				DBGPRINT(RT_DEBUG_WARN, ("PeerBeaconAndProbeRspSanity - wrong IE_HT_CAP. pEid->Len = %d\n", pEid->Len));
-			}
-
-		break;
-            case IE_ADD_HT:
-			if (pEid->Len >= sizeof(ADD_HT_INFO_IE))
-			{
-				// This IE allows extension, but we can ignore extra bytes beyond our knowledge , so only
-				// copy first sizeof(ADD_HT_INFO_IE)
-				NdisMoveMemory(AddHtInfo, pEid->Octet, sizeof(ADD_HT_INFO_IE));
-				*AddHtInfoLen = SIZE_ADD_HT_INFO_IE;
-
-				CtrlChannel = AddHtInfo->ControlChan;
-
-				*(USHORT *)(&AddHtInfo->AddHtInfo2) = cpu2le16(*(USHORT *)(&AddHtInfo->AddHtInfo2));
-				*(USHORT *)(&AddHtInfo->AddHtInfo3) = cpu2le16(*(USHORT *)(&AddHtInfo->AddHtInfo3));
-
-#ifdef CONFIG_STA_SUPPORT
-				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				{
-			                Ptr = (PUCHAR) pVIE;
-			                NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid, pEid->Len + 2);
-			                *LengthVIE += (pEid->Len + 2);
-				}
-#endif // CONFIG_STA_SUPPORT //
-			}
-			else
-			{
-				DBGPRINT(RT_DEBUG_WARN, ("PeerBeaconAndProbeRspSanity - wrong IE_ADD_HT. \n"));
-			}
-
-		break;
-            case IE_SECONDARY_CH_OFFSET:
-			if (pEid->Len == 1)
-			{
-				*NewExtChannelOffset = pEid->Octet[0];
-			}
-			else
-			{
-				DBGPRINT(RT_DEBUG_WARN, ("PeerBeaconAndProbeRspSanity - wrong IE_SECONDARY_CH_OFFSET. \n"));
-			}
-
-		break;
-            case IE_FH_PARM:
-                DBGPRINT(RT_DEBUG_TRACE, ("PeerBeaconAndProbeRspSanity(IE_FH_PARM) \n"));
-                break;
-
-            case IE_DS_PARM:
-                if(pEid->Len == 1)
-                {
-                    *pChannel = *pEid->Octet;
-#ifdef CONFIG_STA_SUPPORT
-					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-					{
-						if (ChannelSanity(pAd, *pChannel) == 0)
-						{
-
-							return FALSE;
-						}
-					}
-#endif // CONFIG_STA_SUPPORT //
-                    Sanity |= 0x4;
-                }
-                else
-                {
-                    DBGPRINT(RT_DEBUG_TRACE, ("PeerBeaconAndProbeRspSanity - wrong IE_DS_PARM (len=%d)\n",pEid->Len));
-                    return FALSE;
-                }
-                break;
-
-            case IE_CF_PARM:
-                if(pEid->Len == 6)
-                {
-                    pCfParm->bValid = TRUE;
-                    pCfParm->CfpCount = pEid->Octet[0];
-                    pCfParm->CfpPeriod = pEid->Octet[1];
-                    pCfParm->CfpMaxDuration = pEid->Octet[2] + 256 * pEid->Octet[3];
-                    pCfParm->CfpDurRemaining = pEid->Octet[4] + 256 * pEid->Octet[5];
-                }
-                else
-                {
-                    DBGPRINT(RT_DEBUG_TRACE, ("PeerBeaconAndProbeRspSanity - wrong IE_CF_PARM\n"));
-                    return FALSE;
-                }
-                break;
-
-            case IE_IBSS_PARM:
-                if(pEid->Len == 2)
-                {
-                    NdisMoveMemory(pAtimWin, pEid->Octet, pEid->Len);
-                }
-                else
-                {
-                    DBGPRINT(RT_DEBUG_TRACE, ("PeerBeaconAndProbeRspSanity - wrong IE_IBSS_PARM\n"));
-                    return FALSE;
-                }
-                break;
-
-#ifdef CONFIG_STA_SUPPORT
-            case IE_TIM:
-                if(INFRA_ON(pAd) && SubType == SUBTYPE_BEACON)
-                {
-                    GetTimBit((PUCHAR)pEid, pAd->StaActive.Aid, &TimLen, pBcastFlag, pDtimCount, pDtimPeriod, pMessageToMe);
-                }
-                break;
-#endif // CONFIG_STA_SUPPORT //
-            case IE_CHANNEL_SWITCH_ANNOUNCEMENT:
-                if(pEid->Len == 3)
-                {
-                	*pNewChannel = pEid->Octet[1];	//extract new channel number
-                }
-                break;
-
-            // New for WPA
-            // CCX v2 has the same IE, we need to parse that too
-            // Wifi WMM use the same IE vale, need to parse that too
-            // case IE_WPA:
-            case IE_VENDOR_SPECIFIC:
-                // Check Broadcom/Atheros 802.11n OUI version, for HT Capability IE.
-                // This HT IE is before IEEE draft set HT IE value.2006-09-28 by Jan.
-                /*if (NdisEqualMemory(pEid->Octet, BROADCOM_OUI, 3) && (pEid->Len >= 4))
-                {
-                	if ((pEid->Octet[3] == OUI_BROADCOM_HT) && (pEid->Len >= 30))
-            		{
-				{
-					NdisMoveMemory(pHtCapability, &pEid->Octet[4], sizeof(HT_CAPABILITY_IE));
-					*pHtCapabilityLen = SIZE_HT_CAP_IE;	// Nnow we only support 26 bytes.
-				}
-         		}
-                	if ((pEid->Octet[3] == OUI_BROADCOM_HT) && (pEid->Len >= 26))
-            		{
-				{
-					NdisMoveMemory(AddHtInfo, &pEid->Octet[4], sizeof(ADD_HT_INFO_IE));
-					*AddHtInfoLen = SIZE_ADD_HT_INFO_IE;	// Nnow we only support 26 bytes.
-				}
-         		}
-                }
-				*/
-                // Check the OUI version, filter out non-standard usage
-                if (NdisEqualMemory(pEid->Octet, RALINK_OUI, 3) && (pEid->Len == 7))
-                {
-                    //*pRalinkIe = pEid->Octet[3];
-                    if (pEid->Octet[3] != 0)
-        				*pRalinkIe = pEid->Octet[3];
-        			else
-        				*pRalinkIe = 0xf0000000; // Set to non-zero value (can't set bit0-2) to represent this is Ralink Chip. So at linkup, we will set ralinkchip flag.
-                }
-#ifdef CONFIG_STA_SUPPORT
-#ifdef DOT11_N_SUPPORT
-		// This HT IE is before IEEE draft set HT IE value.2006-09-28 by Jan.
-
-                // Other vendors had production before IE_HT_CAP value is assigned. To backward support those old-firmware AP,
-                // Check broadcom-defiend pre-802.11nD1.0 OUI for HT related IE, including HT Capatilities IE and HT Information IE
-                else if ((*pHtCapabilityLen == 0) && NdisEqualMemory(pEid->Octet, PRE_N_HT_OUI, 3) && (pEid->Len >= 4) && (pAd->OpMode == OPMODE_STA))
-                {
-                    if ((pEid->Octet[3] == OUI_PREN_HT_CAP) && (pEid->Len >= 30) && (*pHtCapabilityLen == 0))
-                    {
-                        NdisMoveMemory(pHtCapability, &pEid->Octet[4], sizeof(HT_CAPABILITY_IE));
-                        *pPreNHtCapabilityLen = SIZE_HT_CAP_IE;
-                    }
-
-                    if ((pEid->Octet[3] == OUI_PREN_ADD_HT) && (pEid->Len >= 26))
-                    {
-                        NdisMoveMemory(AddHtInfo, &pEid->Octet[4], sizeof(ADD_HT_INFO_IE));
-                        *AddHtInfoLen = SIZE_ADD_HT_INFO_IE;
-                    }
-                }
-#endif // DOT11_N_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-                else if (NdisEqualMemory(pEid->Octet, WPA_OUI, 4))
-                {
-                    // Copy to pVIE which will report to microsoft bssid list.
-                    Ptr = (PUCHAR) pVIE;
-                    NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid, pEid->Len + 2);
-                    *LengthVIE += (pEid->Len + 2);
-                }
-                else if (NdisEqualMemory(pEid->Octet, WME_PARM_ELEM, 6) && (pEid->Len == 24))
-                {
-                    PUCHAR ptr;
-                    int i;
-
-                    // parsing EDCA parameters
-                    pEdcaParm->bValid          = TRUE;
-                    pEdcaParm->bQAck           = FALSE; // pEid->Octet[0] & 0x10;
-                    pEdcaParm->bQueueRequest   = FALSE; // pEid->Octet[0] & 0x20;
-                    pEdcaParm->bTxopRequest    = FALSE; // pEid->Octet[0] & 0x40;
-                    pEdcaParm->EdcaUpdateCount = pEid->Octet[6] & 0x0f;
-                    pEdcaParm->bAPSDCapable    = (pEid->Octet[6] & 0x80) ? 1 : 0;
-                    ptr = &pEid->Octet[8];
-                    for (i=0; i<4; i++)
-                    {
-                        UCHAR aci = (*ptr & 0x60) >> 5; // b5~6 is AC INDEX
-                        pEdcaParm->bACM[aci]  = (((*ptr) & 0x10) == 0x10);   // b5 is ACM
-                        pEdcaParm->Aifsn[aci] = (*ptr) & 0x0f;               // b0~3 is AIFSN
-                        pEdcaParm->Cwmin[aci] = *(ptr+1) & 0x0f;             // b0~4 is Cwmin
-                        pEdcaParm->Cwmax[aci] = *(ptr+1) >> 4;               // b5~8 is Cwmax
-                        pEdcaParm->Txop[aci]  = *(ptr+2) + 256 * (*(ptr+3)); // in unit of 32-us
-                        ptr += 4; // point to next AC
-                    }
-                }
-                else if (NdisEqualMemory(pEid->Octet, WME_INFO_ELEM, 6) && (pEid->Len == 7))
-                {
-                    // parsing EDCA parameters
-                    pEdcaParm->bValid          = TRUE;
-                    pEdcaParm->bQAck           = FALSE; // pEid->Octet[0] & 0x10;
-                    pEdcaParm->bQueueRequest   = FALSE; // pEid->Octet[0] & 0x20;
-                    pEdcaParm->bTxopRequest    = FALSE; // pEid->Octet[0] & 0x40;
-                    pEdcaParm->EdcaUpdateCount = pEid->Octet[6] & 0x0f;
-                    pEdcaParm->bAPSDCapable    = (pEid->Octet[6] & 0x80) ? 1 : 0;
-
-                    // use default EDCA parameter
-                    pEdcaParm->bACM[QID_AC_BE]  = 0;
-                    pEdcaParm->Aifsn[QID_AC_BE] = 3;
-                    pEdcaParm->Cwmin[QID_AC_BE] = CW_MIN_IN_BITS;
-                    pEdcaParm->Cwmax[QID_AC_BE] = CW_MAX_IN_BITS;
-                    pEdcaParm->Txop[QID_AC_BE]  = 0;
-
-                    pEdcaParm->bACM[QID_AC_BK]  = 0;
-                    pEdcaParm->Aifsn[QID_AC_BK] = 7;
-                    pEdcaParm->Cwmin[QID_AC_BK] = CW_MIN_IN_BITS;
-                    pEdcaParm->Cwmax[QID_AC_BK] = CW_MAX_IN_BITS;
-                    pEdcaParm->Txop[QID_AC_BK]  = 0;
-
-                    pEdcaParm->bACM[QID_AC_VI]  = 0;
-                    pEdcaParm->Aifsn[QID_AC_VI] = 2;
-                    pEdcaParm->Cwmin[QID_AC_VI] = CW_MIN_IN_BITS-1;
-                    pEdcaParm->Cwmax[QID_AC_VI] = CW_MAX_IN_BITS;
-                    pEdcaParm->Txop[QID_AC_VI]  = 96;   // AC_VI: 96*32us ~= 3ms
-
-                    pEdcaParm->bACM[QID_AC_VO]  = 0;
-                    pEdcaParm->Aifsn[QID_AC_VO] = 2;
-                    pEdcaParm->Cwmin[QID_AC_VO] = CW_MIN_IN_BITS-2;
-                    pEdcaParm->Cwmax[QID_AC_VO] = CW_MAX_IN_BITS-1;
-                    pEdcaParm->Txop[QID_AC_VO]  = 48;   // AC_VO: 48*32us ~= 1.5ms
-                }
-                break;
-
-            case IE_EXT_SUPP_RATES:
-                if (pEid->Len <= MAX_LEN_OF_SUPPORTED_RATES)
-                {
-                    NdisMoveMemory(ExtRate, pEid->Octet, pEid->Len);
-                    *pExtRateLen = pEid->Len;
-
-                    // TODO: 2004-09-14 not a good design here, cause it exclude extra rates
-                    // from ScanTab. We should report as is. And filter out unsupported
-                    // rates in MlmeAux.
-                    // Check against the supported rates
-                    // RTMPCheckRates(pAd, ExtRate, pExtRateLen);
-                }
-                break;
-
-            case IE_ERP:
-                if (pEid->Len == 1)
-                {
-                    *pErp = (UCHAR)pEid->Octet[0];
-                }
-                break;
-
-            case IE_AIRONET_CKIP:
-                // 0. Check Aironet IE length, it must be larger or equal to 28
-                // Cisco AP350 used length as 28
-                // Cisco AP12XX used length as 30
-                if (pEid->Len < (CKIP_NEGOTIATION_LENGTH - 2))
-                    break;
-
-                // 1. Copy CKIP flag byte to buffer for process
-                *pCkipFlag = *(pEid->Octet + 8);
-                break;
-
-            case IE_AP_TX_POWER:
-                // AP Control of Client Transmit Power
-                //0. Check Aironet IE length, it must be 6
-                if (pEid->Len != 0x06)
-                    break;
-
-                // Get cell power limit in dBm
-                if (NdisEqualMemory(pEid->Octet, CISCO_OUI, 3) == 1)
-                    *pAironetCellPowerLimit = *(pEid->Octet + 4);
-                break;
-
-            // WPA2 & 802.11i RSN
-            case IE_RSN:
-                // There is no OUI for version anymore, check the group cipher OUI before copying
-                if (RTMPEqualMemory(pEid->Octet + 2, RSN_OUI, 3))
-                {
-                    // Copy to pVIE which will report to microsoft bssid list.
-                    Ptr = (PUCHAR) pVIE;
-                    NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid, pEid->Len + 2);
-                    *LengthVIE += (pEid->Len + 2);
-                }
-                break;
-#ifdef CONFIG_STA_SUPPORT
-#ifdef EXT_BUILD_CHANNEL_LIST
-			case IE_COUNTRY:
-				Ptr = (PUCHAR) pVIE;
-                NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid, pEid->Len + 2);
-                *LengthVIE += (pEid->Len + 2);
-				break;
-#endif // EXT_BUILD_CHANNEL_LIST //
-#endif // CONFIG_STA_SUPPORT //
-            default:
-                break;
-        }
-
-        Length = Length + 2 + pEid->Len;  // Eid[1] + Len[1]+ content[Len]
-        pEid = (PEID_STRUCT)((UCHAR*)pEid + 2 + pEid->Len);
-    }
-
-    // For some 11a AP. it did not have the channel EID, patch here
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		UCHAR LatchRfChannel = MsgChannel;
-		if ((pAd->LatchRfRegs.Channel > 14) && ((Sanity & 0x4) == 0))
-		{
-			if (CtrlChannel != 0)
-				*pChannel = CtrlChannel;
-			else
-				*pChannel = LatchRfChannel;
-			Sanity |= 0x4;
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	if (Sanity != 0x7)
-	{
-		DBGPRINT(RT_DEBUG_WARN, ("PeerBeaconAndProbeRspSanity - missing field, Sanity=0x%02x\n", Sanity));
-		return FALSE;
-	}
-	else
-	{
-		return TRUE;
-	}
-
-}
-
-#ifdef DOT11N_DRAFT3
-/*
-	==========================================================================
-	Description:
-		MLME message sanity check for some IE addressed  in 802.11n d3.03.
-	Return:
-		TRUE if all parameters are OK, FALSE otherwise
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-BOOLEAN PeerBeaconAndProbeRspSanity2(
-	IN PRTMP_ADAPTER pAd,
-	IN VOID *Msg,
-	IN ULONG MsgLen,
-	OUT UCHAR 	*RegClass)
-{
-	CHAR				*Ptr;
-	PFRAME_802_11		pFrame;
-	PEID_STRUCT			pEid;
-	ULONG				Length = 0;
-
-	pFrame = (PFRAME_802_11)Msg;
-
-	*RegClass = 0;
-	Ptr = pFrame->Octet;
-	Length += LENGTH_802_11;
-
-	// get timestamp from payload and advance the pointer
-	Ptr += TIMESTAMP_LEN;
-	Length += TIMESTAMP_LEN;
-
-	// get beacon interval from payload and advance the pointer
-	Ptr += 2;
-	Length += 2;
-
-	// get capability info from payload and advance the pointer
-	Ptr += 2;
-	Length += 2;
-
-	pEid = (PEID_STRUCT) Ptr;
-
-	// get variable fields from payload and advance the pointer
-	while ((Length + 2 + pEid->Len) <= MsgLen)
-	{
-		switch(pEid->Eid)
-		{
-			case IE_SUPP_REG_CLASS:
-				if(pEid->Len > 0)
-				{
-					*RegClass = *pEid->Octet;
-				}
-				else
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("PeerBeaconAndProbeRspSanity - wrong IE_SSID (len=%d)\n",pEid->Len));
-					return FALSE;
-				}
-				break;
-		}
-
-		Length = Length + 2 + pEid->Len;  // Eid[1] + Len[1]+ content[Len]
-		pEid = (PEID_STRUCT)((UCHAR*)pEid + 2 + pEid->Len);
-	}
-
-	return TRUE;
-
-}
-#endif // DOT11N_DRAFT3 //
-
-/*
-    ==========================================================================
-    Description:
-        MLME message sanity check
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
- */
-BOOLEAN MlmeScanReqSanity(
-	IN PRTMP_ADAPTER pAd,
-	IN VOID *Msg,
-	IN ULONG MsgLen,
-	OUT UCHAR *pBssType,
-	OUT CHAR Ssid[],
-	OUT UCHAR *pSsidLen,
-	OUT UCHAR *pScanType)
-{
-	MLME_SCAN_REQ_STRUCT *Info;
-
-	Info = (MLME_SCAN_REQ_STRUCT *)(Msg);
-	*pBssType = Info->BssType;
-	*pSsidLen = Info->SsidLen;
-	NdisMoveMemory(Ssid, Info->Ssid, *pSsidLen);
-	*pScanType = Info->ScanType;
-
-	if ((*pBssType == BSS_INFRA || *pBssType == BSS_ADHOC || *pBssType == BSS_ANY)
-		&& (*pScanType == SCAN_ACTIVE || *pScanType == SCAN_PASSIVE
-#ifdef CONFIG_STA_SUPPORT
-		|| *pScanType == SCAN_CISCO_PASSIVE || *pScanType == SCAN_CISCO_ACTIVE
-		|| *pScanType == SCAN_CISCO_CHANNEL_LOAD || *pScanType == SCAN_CISCO_NOISE
-#endif // CONFIG_STA_SUPPORT //
-		))
-	{
-		return TRUE;
-	}
-	else
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("MlmeScanReqSanity fail - wrong BssType or ScanType\n"));
-		return FALSE;
-	}
-}
-
-// IRQL = DISPATCH_LEVEL
-UCHAR ChannelSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN UCHAR channel)
-{
-    int i;
-
-    for (i = 0; i < pAd->ChannelListNum; i ++)
-    {
-        if (channel == pAd->ChannelList[i].Channel)
-            return 1;
-    }
-    return 0;
-}
-
-/*
-    ==========================================================================
-    Description:
-        MLME message sanity check
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-BOOLEAN PeerDeauthSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pAddr2,
-    OUT USHORT *pReason)
-{
-    PFRAME_802_11 pFrame = (PFRAME_802_11)Msg;
-
-    COPY_MAC_ADDR(pAddr2, pFrame->Hdr.Addr2);
-    NdisMoveMemory(pReason, &pFrame->Octet[0], 2);
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        MLME message sanity check
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-BOOLEAN PeerAuthSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pAddr,
-    OUT USHORT *pAlg,
-    OUT USHORT *pSeq,
-    OUT USHORT *pStatus,
-    CHAR *pChlgText)
-{
-    PFRAME_802_11 pFrame = (PFRAME_802_11)Msg;
-
-    COPY_MAC_ADDR(pAddr,   pFrame->Hdr.Addr2);
-    NdisMoveMemory(pAlg,    &pFrame->Octet[0], 2);
-    NdisMoveMemory(pSeq,    &pFrame->Octet[2], 2);
-    NdisMoveMemory(pStatus, &pFrame->Octet[4], 2);
-
-    if ((*pAlg == Ndis802_11AuthModeOpen)
-#ifdef LEAP_SUPPORT
-      || (*pAlg == CISCO_AuthModeLEAP)
-#endif // LEAP_SUPPORT //
-      )
-    {
-        if (*pSeq == 1 || *pSeq == 2)
-        {
-            return TRUE;
-        }
-        else
-        {
-            DBGPRINT(RT_DEBUG_TRACE, ("PeerAuthSanity fail - wrong Seg#\n"));
-            return FALSE;
-        }
-    }
-    else if (*pAlg == Ndis802_11AuthModeShared)
-    {
-        if (*pSeq == 1 || *pSeq == 4)
-        {
-            return TRUE;
-        }
-        else if (*pSeq == 2 || *pSeq == 3)
-        {
-            NdisMoveMemory(pChlgText, &pFrame->Octet[8], CIPHER_TEXT_LEN);
-            return TRUE;
-        }
-        else
-        {
-            DBGPRINT(RT_DEBUG_TRACE, ("PeerAuthSanity fail - wrong Seg#\n"));
-            return FALSE;
-        }
-    }
-    else
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("PeerAuthSanity fail - wrong algorithm\n"));
-        return FALSE;
-    }
-}
-
-/*
-    ==========================================================================
-    Description:
-        MLME message sanity check
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
- */
-BOOLEAN MlmeAuthReqSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pAddr,
-    OUT ULONG *pTimeout,
-    OUT USHORT *pAlg)
-{
-    MLME_AUTH_REQ_STRUCT *pInfo;
-
-    pInfo  = (MLME_AUTH_REQ_STRUCT *)Msg;
-    COPY_MAC_ADDR(pAddr, pInfo->Addr);
-    *pTimeout = pInfo->Timeout;
-    *pAlg = pInfo->Alg;
-
-    if (((*pAlg == Ndis802_11AuthModeShared) ||(*pAlg == Ndis802_11AuthModeOpen)
-#ifdef LEAP_SUPPORT
-     || (*pAlg == CISCO_AuthModeLEAP)
-#endif // LEAP_SUPPORT //
-     	) &&
-        ((*pAddr & 0x01) == 0))
-    {
-        return TRUE;
-    }
-    else
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("MlmeAuthReqSanity fail - wrong algorithm\n"));
-        return FALSE;
-    }
-}
-
-/*
-    ==========================================================================
-    Description:
-        MLME message sanity check
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-BOOLEAN MlmeAssocReqSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pApAddr,
-    OUT USHORT *pCapabilityInfo,
-    OUT ULONG *pTimeout,
-    OUT USHORT *pListenIntv)
-{
-    MLME_ASSOC_REQ_STRUCT *pInfo;
-
-    pInfo = (MLME_ASSOC_REQ_STRUCT *)Msg;
-    *pTimeout = pInfo->Timeout;                             // timeout
-    COPY_MAC_ADDR(pApAddr, pInfo->Addr);                   // AP address
-    *pCapabilityInfo = pInfo->CapabilityInfo;               // capability info
-    *pListenIntv = pInfo->ListenIntv;
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        MLME message sanity check
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-BOOLEAN PeerDisassocSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pAddr2,
-    OUT USHORT *pReason)
-{
-    PFRAME_802_11 pFrame = (PFRAME_802_11)Msg;
-
-    COPY_MAC_ADDR(pAddr2, pFrame->Hdr.Addr2);
-    NdisMoveMemory(pReason, &pFrame->Octet[0], 2);
-
-    return TRUE;
-}
-
-/*
-	========================================================================
-	Routine Description:
-		Sanity check NetworkType (11b, 11g or 11a)
-
-	Arguments:
-		pBss - Pointer to BSS table.
-
-	Return Value:
-        Ndis802_11DS .......(11b)
-        Ndis802_11OFDM24....(11g)
-        Ndis802_11OFDM5.....(11a)
-
-	IRQL = DISPATCH_LEVEL
-
-	========================================================================
-*/
-NDIS_802_11_NETWORK_TYPE NetworkTypeInUseSanity(
-    IN PBSS_ENTRY pBss)
-{
-	NDIS_802_11_NETWORK_TYPE	NetWorkType;
-	UCHAR						rate, i;
-
-	NetWorkType = Ndis802_11DS;
-
-	if (pBss->Channel <= 14)
-	{
-		//
-		// First check support Rate.
-		//
-		for (i = 0; i < pBss->SupRateLen; i++)
-		{
-			rate = pBss->SupRate[i] & 0x7f; // Mask out basic rate set bit
-			if ((rate == 2) || (rate == 4) || (rate == 11) || (rate == 22))
-			{
-				continue;
-			}
-			else
-			{
-				//
-				// Otherwise (even rate > 108) means Ndis802_11OFDM24
-				//
-				NetWorkType = Ndis802_11OFDM24;
-				break;
-			}
-		}
-
-		//
-		// Second check Extend Rate.
-		//
-		if (NetWorkType != Ndis802_11OFDM24)
-		{
-			for (i = 0; i < pBss->ExtRateLen; i++)
-			{
-				rate = pBss->SupRate[i] & 0x7f; // Mask out basic rate set bit
-				if ((rate == 2) || (rate == 4) || (rate == 11) || (rate == 22))
-				{
-					continue;
-				}
-				else
-				{
-					//
-					// Otherwise (even rate > 108) means Ndis802_11OFDM24
-					//
-					NetWorkType = Ndis802_11OFDM24;
-					break;
-				}
-			}
-		}
-	}
-	else
-	{
-		NetWorkType = Ndis802_11OFDM5;
-	}
-
-    if (pBss->HtCapabilityLen != 0)
-    {
-        if (NetWorkType == Ndis802_11OFDM5)
-            NetWorkType = Ndis802_11OFDM5_N;
-        else
-            NetWorkType = Ndis802_11OFDM24_N;
-    }
-
-	return NetWorkType;
-}
-
-/*
-    ==========================================================================
-    Description:
-        WPA message sanity check
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
- */
-BOOLEAN PeerWpaMessageSanity(
-    IN 	PRTMP_ADAPTER 		pAd,
-    IN 	PEAPOL_PACKET 		pMsg,
-    IN 	ULONG 				MsgLen,
-    IN 	UCHAR				MsgType,
-    IN 	MAC_TABLE_ENTRY  	*pEntry)
-{
-	UCHAR			mic[LEN_KEY_DESC_MIC], digest[80], KEYDATA[MAX_LEN_OF_RSNIE];
-	BOOLEAN			bReplayDiff = FALSE;
-	BOOLEAN			bWPA2 = FALSE;
-	KEY_INFO		EapolKeyInfo;
-	UCHAR			GroupKeyIndex = 0;
-
-
-	NdisZeroMemory(mic, sizeof(mic));
-	NdisZeroMemory(digest, sizeof(digest));
-	NdisZeroMemory(KEYDATA, sizeof(KEYDATA));
-	NdisZeroMemory((PUCHAR)&EapolKeyInfo, sizeof(EapolKeyInfo));
-
-	NdisMoveMemory((PUCHAR)&EapolKeyInfo, (PUCHAR)&pMsg->KeyDesc.KeyInfo, sizeof(KEY_INFO));
-
-	*((USHORT *)&EapolKeyInfo) = cpu2le16(*((USHORT *)&EapolKeyInfo));
-
-	// Choose WPA2 or not
-	if ((pEntry->AuthMode == Ndis802_11AuthModeWPA2) || (pEntry->AuthMode == Ndis802_11AuthModeWPA2PSK))
-		bWPA2 = TRUE;
-
-	// 0. Check MsgType
-	if ((MsgType > EAPOL_GROUP_MSG_2) || (MsgType < EAPOL_PAIR_MSG_1))
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("The message type is invalid(%d)! \n", MsgType));
-		return FALSE;
-	}
-
-	// 1. Replay counter check
- 	if (MsgType == EAPOL_PAIR_MSG_1 || MsgType == EAPOL_PAIR_MSG_3 || MsgType == EAPOL_GROUP_MSG_1)	// For supplicant
-    {
-    	// First validate replay counter, only accept message with larger replay counter.
-		// Let equal pass, some AP start with all zero replay counter
-		UCHAR	ZeroReplay[LEN_KEY_DESC_REPLAY];
-
-        NdisZeroMemory(ZeroReplay, LEN_KEY_DESC_REPLAY);
-		if ((RTMPCompareMemory(pMsg->KeyDesc.ReplayCounter, pEntry->R_Counter, LEN_KEY_DESC_REPLAY) != 1) &&
-			(RTMPCompareMemory(pMsg->KeyDesc.ReplayCounter, ZeroReplay, LEN_KEY_DESC_REPLAY) != 0))
-    	{
-			bReplayDiff = TRUE;
-    	}
- 	}
-	else if (MsgType == EAPOL_PAIR_MSG_2 || MsgType == EAPOL_PAIR_MSG_4 || MsgType == EAPOL_GROUP_MSG_2)	// For authenticator
-	{
-		// check Replay Counter coresponds to MSG from authenticator, otherwise discard
-    	if (!NdisEqualMemory(pMsg->KeyDesc.ReplayCounter, pEntry->R_Counter, LEN_KEY_DESC_REPLAY))
-    	{
-			bReplayDiff = TRUE;
-    	}
-	}
-
-	// Replay Counter different condition
-	if (bReplayDiff)
-	{
-		// send wireless event - for replay counter different
-		if (pAd->CommonCfg.bWirelessEvent)
-			RTMPSendWirelessEvent(pAd, IW_REPLAY_COUNTER_DIFF_EVENT_FLAG, pEntry->Addr, pEntry->apidx, 0);
-
-		if (MsgType < EAPOL_GROUP_MSG_1)
-		{
-           	DBGPRINT(RT_DEBUG_ERROR, ("Replay Counter Different in pairwise msg %d of 4-way handshake!\n", MsgType));
-		}
-		else
-		{
-			DBGPRINT(RT_DEBUG_ERROR, ("Replay Counter Different in group msg %d of 2-way handshake!\n", (MsgType - EAPOL_PAIR_MSG_4)));
-		}
-
-		hex_dump("Receive replay counter ", pMsg->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-		hex_dump("Current replay counter ", pEntry->R_Counter, LEN_KEY_DESC_REPLAY);
-        return FALSE;
-	}
-
-	// 2. Verify MIC except Pairwise Msg1
-	if (MsgType != EAPOL_PAIR_MSG_1)
-	{
-		UCHAR			rcvd_mic[LEN_KEY_DESC_MIC];
-
-		// Record the received MIC for check later
-		NdisMoveMemory(rcvd_mic, pMsg->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
-		NdisZeroMemory(pMsg->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
-
-        if (pEntry->WepStatus == Ndis802_11Encryption2Enabled)	// TKIP
-        {
-            hmac_md5(pEntry->PTK, LEN_EAP_MICK, (PUCHAR)pMsg, MsgLen, mic);
-        }
-        else if (pEntry->WepStatus == Ndis802_11Encryption3Enabled)	// AES
-        {
-            HMAC_SHA1((PUCHAR)pMsg, MsgLen, pEntry->PTK, LEN_EAP_MICK, digest);
-            NdisMoveMemory(mic, digest, LEN_KEY_DESC_MIC);
-        }
-
-        if (!NdisEqualMemory(rcvd_mic, mic, LEN_KEY_DESC_MIC))
-        {
-			// send wireless event - for MIC different
-			if (pAd->CommonCfg.bWirelessEvent)
-				RTMPSendWirelessEvent(pAd, IW_MIC_DIFF_EVENT_FLAG, pEntry->Addr, pEntry->apidx, 0);
-
-			if (MsgType < EAPOL_GROUP_MSG_1)
-			{
-            	DBGPRINT(RT_DEBUG_ERROR, ("MIC Different in pairwise msg %d of 4-way handshake!\n", MsgType));
-			}
-			else
-			{
-				DBGPRINT(RT_DEBUG_ERROR, ("MIC Different in group msg %d of 2-way handshake!\n", (MsgType - EAPOL_PAIR_MSG_4)));
-			}
-
-			hex_dump("Received MIC", rcvd_mic, LEN_KEY_DESC_MIC);
-			hex_dump("Desired  MIC", mic, LEN_KEY_DESC_MIC);
-
-			return FALSE;
-        }
-	}
-
-	// Extract the context of the Key Data field if it exist
-	// The field in pairwise_msg_2_WPA1(WPA2) & pairwise_msg_3_WPA1 is un-encrypted.
-	// The field in group_msg_1_WPA1(WPA2) & pairwise_msg_3_WPA2 is encrypted.
-	if (pMsg->KeyDesc.KeyDataLen[1] > 0)
-	{
-		// Decrypt this field
-		if ((MsgType == EAPOL_PAIR_MSG_3 && bWPA2) || (MsgType == EAPOL_GROUP_MSG_1))
-		{
-			if(pEntry->WepStatus == Ndis802_11Encryption3Enabled)
-			{
-				// AES
-				AES_GTK_KEY_UNWRAP(&pEntry->PTK[16], KEYDATA, pMsg->KeyDesc.KeyDataLen[1],pMsg->KeyDesc.KeyData);
-			}
-			else
-			{
-				INT 	i;
-				UCHAR   Key[32];
-				// Decrypt TKIP GTK
-				// Construct 32 bytes RC4 Key
-				NdisMoveMemory(Key, pMsg->KeyDesc.KeyIv, 16);
-				NdisMoveMemory(&Key[16], &pEntry->PTK[16], 16);
-				ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, Key, 32);
-				//discard first 256 bytes
-				for(i = 0; i < 256; i++)
-					ARCFOUR_BYTE(&pAd->PrivateInfo.WEPCONTEXT);
-				// Decrypt GTK. Becareful, there is no ICV to check the result is correct or not
-				ARCFOUR_DECRYPT(&pAd->PrivateInfo.WEPCONTEXT, KEYDATA, pMsg->KeyDesc.KeyData, pMsg->KeyDesc.KeyDataLen[1]);
-			}
-
-			if (!bWPA2 && (MsgType == EAPOL_GROUP_MSG_1))
-				GroupKeyIndex = EapolKeyInfo.KeyIndex;
-
-		}
-		else if ((MsgType == EAPOL_PAIR_MSG_2) || (MsgType == EAPOL_PAIR_MSG_3 && !bWPA2))
-		{
-			NdisMoveMemory(KEYDATA, pMsg->KeyDesc.KeyData, pMsg->KeyDesc.KeyDataLen[1]);
-		}
-		else
-		{
-
-			return TRUE;
-		}
-
-		// Parse Key Data field to
-		// 1. verify RSN IE for pairwise_msg_2_WPA1(WPA2) ,pairwise_msg_3_WPA1(WPA2)
-		// 2. verify KDE format for pairwise_msg_3_WPA2, group_msg_1_WPA2
-		// 3. update shared key for pairwise_msg_3_WPA2, group_msg_1_WPA1(WPA2)
-		if (!RTMPParseEapolKeyData(pAd, KEYDATA, pMsg->KeyDesc.KeyDataLen[1], GroupKeyIndex, MsgType, bWPA2, pEntry))
-		{
-			return FALSE;
-		}
-	}
-
-	return TRUE;
-
-}
-
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-BOOLEAN MlmeDlsReqSanity(
-	IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PRT_802_11_DLS *pDLS,
-    OUT PUSHORT pReason)
-{
-	MLME_DLS_REQ_STRUCT *pInfo;
-
-    pInfo = (MLME_DLS_REQ_STRUCT *)Msg;
-
-	*pDLS = pInfo->pDLS;
-	*pReason = pInfo->Reason;
-
-	return TRUE;
-}
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef QOS_DLS_SUPPORT
-BOOLEAN PeerDlsReqSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pDA,
-    OUT PUCHAR pSA,
-    OUT USHORT *pCapabilityInfo,
-    OUT USHORT *pDlsTimeout,
-    OUT UCHAR *pRatesLen,
-    OUT UCHAR Rates[],
-	OUT UCHAR *pHtCapabilityLen,
-    OUT HT_CAPABILITY_IE *pHtCapability)
-{
-	CHAR            *Ptr;
-    PFRAME_802_11	Fr = (PFRAME_802_11)Msg;
-	PEID_STRUCT  eid_ptr;
-
-    // to prevent caller from using garbage output value
-    *pCapabilityInfo	= 0;
-    *pDlsTimeout	= 0;
-	*pHtCapabilityLen = 0;
-
-    Ptr = Fr->Octet;
-
-	// offset to destination MAC address (Category and Action field)
-    Ptr += 2;
-
-    // get DA from payload and advance the pointer
-    NdisMoveMemory(pDA, Ptr, MAC_ADDR_LEN);
-    Ptr += MAC_ADDR_LEN;
-
-    // get SA from payload and advance the pointer
-    NdisMoveMemory(pSA, Ptr, MAC_ADDR_LEN);
-    Ptr += MAC_ADDR_LEN;
-
-    // get capability info from payload and advance the pointer
-    NdisMoveMemory(pCapabilityInfo, Ptr, 2);
-    Ptr += 2;
-
-    // get capability info from payload and advance the pointer
-    NdisMoveMemory(pDlsTimeout, Ptr, 2);
-    Ptr += 2;
-
-	// Category and Action field + DA + SA + capability + Timeout
-	eid_ptr = (PEID_STRUCT) &Fr->Octet[18];
-
-	while (((UCHAR*)eid_ptr + eid_ptr->Len + 1) < ((UCHAR*)Fr + MsgLen))
-	{
-		switch(eid_ptr->Eid)
-		{
-			case IE_SUPP_RATES:
-                if ((eid_ptr->Len <= MAX_LEN_OF_SUPPORTED_RATES) && (eid_ptr->Len > 0))
-                {
-                    NdisMoveMemory(Rates, eid_ptr->Octet, eid_ptr->Len);
-                    DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsReqSanity - IE_SUPP_RATES., Len=%d. Rates[0]=%x\n",eid_ptr->Len, Rates[0]));
-                    DBGPRINT(RT_DEBUG_TRACE, ("Rates[1]=%x %x %x %x %x %x %x\n", Rates[1], Rates[2], Rates[3], Rates[4], Rates[5], Rates[6], Rates[7]));
-                    *pRatesLen = eid_ptr->Len;
-                }
-                else
-                {
-                    *pRatesLen = 8;
-					Rates[0] = 0x82;
-					Rates[1] = 0x84;
-					Rates[2] = 0x8b;
-					Rates[3] = 0x96;
-					Rates[4] = 0x12;
-					Rates[5] = 0x24;
-					Rates[6] = 0x48;
-					Rates[7] = 0x6c;
-                    DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsReqSanity - wrong IE_SUPP_RATES., Len=%d\n",eid_ptr->Len));
-                }
-				break;
-
-			case IE_EXT_SUPP_RATES:
-                if (eid_ptr->Len + *pRatesLen <= MAX_LEN_OF_SUPPORTED_RATES)
-                {
-                    NdisMoveMemory(&Rates[*pRatesLen], eid_ptr->Octet, eid_ptr->Len);
-                    *pRatesLen = (*pRatesLen) + eid_ptr->Len;
-                }
-                else
-                {
-                    NdisMoveMemory(&Rates[*pRatesLen], eid_ptr->Octet, MAX_LEN_OF_SUPPORTED_RATES - (*pRatesLen));
-                    *pRatesLen = MAX_LEN_OF_SUPPORTED_RATES;
-                }
-				break;
-
-			case IE_HT_CAP:
-				if (eid_ptr->Len >= sizeof(HT_CAPABILITY_IE))
-				{
-					NdisMoveMemory(pHtCapability, eid_ptr->Octet, sizeof(HT_CAPABILITY_IE));
-
-					*(USHORT *)(&pHtCapability->HtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->HtCapInfo));
-					*(USHORT *)(&pHtCapability->ExtHtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->ExtHtCapInfo));
-					*pHtCapabilityLen = sizeof(HT_CAPABILITY_IE);
-
-					DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsReqSanity - IE_HT_CAP\n"));
-				}
-				else
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsReqSanity - wrong IE_HT_CAP.eid_ptr->Len = %d\n", eid_ptr->Len));
-				}
-				break;
-
-			default:
-				break;
-		}
-
-		eid_ptr = (PEID_STRUCT)((UCHAR*)eid_ptr + 2 + eid_ptr->Len);
-	}
-
-    return TRUE;
-}
-
-BOOLEAN PeerDlsRspSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pDA,
-    OUT PUCHAR pSA,
-    OUT USHORT *pCapabilityInfo,
-    OUT USHORT *pStatus,
-    OUT UCHAR *pRatesLen,
-    OUT UCHAR Rates[],
-    OUT UCHAR *pHtCapabilityLen,
-    OUT HT_CAPABILITY_IE *pHtCapability)
-{
-    CHAR            *Ptr;
-    PFRAME_802_11	Fr = (PFRAME_802_11)Msg;
-	PEID_STRUCT  eid_ptr;
-
-    // to prevent caller from using garbage output value
-    *pStatus		= 0;
-    *pCapabilityInfo	= 0;
-	*pHtCapabilityLen = 0;
-
-    Ptr = Fr->Octet;
-
-	// offset to destination MAC address (Category and Action field)
-    Ptr += 2;
-
-	// get status code from payload and advance the pointer
-    NdisMoveMemory(pStatus, Ptr, 2);
-    Ptr += 2;
-
-    // get DA from payload and advance the pointer
-    NdisMoveMemory(pDA, Ptr, MAC_ADDR_LEN);
-    Ptr += MAC_ADDR_LEN;
-
-    // get SA from payload and advance the pointer
-    NdisMoveMemory(pSA, Ptr, MAC_ADDR_LEN);
-    Ptr += MAC_ADDR_LEN;
-
-	if (pStatus == 0)
-	{
-	    // get capability info from payload and advance the pointer
-	    NdisMoveMemory(pCapabilityInfo, Ptr, 2);
-	    Ptr += 2;
-	}
-
-	// Category and Action field + status code + DA + SA + capability
-	eid_ptr = (PEID_STRUCT) &Fr->Octet[18];
-
-	while (((UCHAR*)eid_ptr + eid_ptr->Len + 1) < ((UCHAR*)Fr + MsgLen))
-	{
-		switch(eid_ptr->Eid)
-		{
-			case IE_SUPP_RATES:
-                if ((eid_ptr->Len <= MAX_LEN_OF_SUPPORTED_RATES) && (eid_ptr->Len > 0))
-                {
-                    NdisMoveMemory(Rates, eid_ptr->Octet, eid_ptr->Len);
-                    DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsRspSanity - IE_SUPP_RATES., Len=%d. Rates[0]=%x\n",eid_ptr->Len, Rates[0]));
-                    DBGPRINT(RT_DEBUG_TRACE, ("Rates[1]=%x %x %x %x %x %x %x\n", Rates[1], Rates[2], Rates[3], Rates[4], Rates[5], Rates[6], Rates[7]));
-                    *pRatesLen = eid_ptr->Len;
-                }
-                else
-                {
-                    *pRatesLen = 8;
-					Rates[0] = 0x82;
-					Rates[1] = 0x84;
-					Rates[2] = 0x8b;
-					Rates[3] = 0x96;
-					Rates[4] = 0x12;
-					Rates[5] = 0x24;
-					Rates[6] = 0x48;
-					Rates[7] = 0x6c;
-                    DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsRspSanity - wrong IE_SUPP_RATES., Len=%d\n",eid_ptr->Len));
-                }
-				break;
-
-			case IE_EXT_SUPP_RATES:
-                if (eid_ptr->Len + *pRatesLen <= MAX_LEN_OF_SUPPORTED_RATES)
-                {
-                    NdisMoveMemory(&Rates[*pRatesLen], eid_ptr->Octet, eid_ptr->Len);
-                    *pRatesLen = (*pRatesLen) + eid_ptr->Len;
-                }
-                else
-                {
-                    NdisMoveMemory(&Rates[*pRatesLen], eid_ptr->Octet, MAX_LEN_OF_SUPPORTED_RATES - (*pRatesLen));
-                    *pRatesLen = MAX_LEN_OF_SUPPORTED_RATES;
-                }
-				break;
-
-			case IE_HT_CAP:
-				if (eid_ptr->Len >= sizeof(HT_CAPABILITY_IE))
-				{
-					NdisMoveMemory(pHtCapability, eid_ptr->Octet, sizeof(HT_CAPABILITY_IE));
-
-					*(USHORT *)(&pHtCapability->HtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->HtCapInfo));
-					*(USHORT *)(&pHtCapability->ExtHtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->ExtHtCapInfo));
-					*pHtCapabilityLen = sizeof(HT_CAPABILITY_IE);
-
-					DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsRspSanity - IE_HT_CAP\n"));
-				}
-				else
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsRspSanity - wrong IE_HT_CAP.eid_ptr->Len = %d\n", eid_ptr->Len));
-				}
-				break;
-
-			default:
-				break;
-		}
-
-		eid_ptr = (PEID_STRUCT)((UCHAR*)eid_ptr + 2 + eid_ptr->Len);
-	}
-
-    return TRUE;
-}
-
-BOOLEAN PeerDlsTearDownSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pDA,
-    OUT PUCHAR pSA,
-    OUT USHORT *pReason)
-{
-    CHAR            *Ptr;
-    PFRAME_802_11	Fr = (PFRAME_802_11)Msg;
-
-    // to prevent caller from using garbage output value
-    *pReason	= 0;
-
-    Ptr = Fr->Octet;
-
-	// offset to destination MAC address (Category and Action field)
-    Ptr += 2;
-
-    // get DA from payload and advance the pointer
-    NdisMoveMemory(pDA, Ptr, MAC_ADDR_LEN);
-    Ptr += MAC_ADDR_LEN;
-
-    // get SA from payload and advance the pointer
-    NdisMoveMemory(pSA, Ptr, MAC_ADDR_LEN);
-    Ptr += MAC_ADDR_LEN;
-
-	// get reason code from payload and advance the pointer
-    NdisMoveMemory(pReason, Ptr, 2);
-    Ptr += 2;
-
-    return TRUE;
-}
-#endif // QOS_DLS_SUPPORT //
-
+#include "../../rt2860/common/cmm_sanity.c"
diff --git a/drivers/staging/rt2870/common/cmm_sync.c b/drivers/staging/rt2870/common/cmm_sync.c
index 2be7c77a384..5e7221d7cb2 100644
--- a/drivers/staging/rt2870/common/cmm_sync.c
+++ b/drivers/staging/rt2870/common/cmm_sync.c
@@ -1,711 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	sync.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	John Chang	2004-09-01      modified for rt2561/2661
-*/
-#include "../rt_config.h"
-
-// 2.4 Ghz channel plan index in the TxPower arrays.
-#define	BG_BAND_REGION_0_START	0			// 1,2,3,4,5,6,7,8,9,10,11
-#define	BG_BAND_REGION_0_SIZE	11
-#define	BG_BAND_REGION_1_START	0			// 1,2,3,4,5,6,7,8,9,10,11,12,13
-#define	BG_BAND_REGION_1_SIZE	13
-#define	BG_BAND_REGION_2_START	9			// 10,11
-#define	BG_BAND_REGION_2_SIZE	2
-#define	BG_BAND_REGION_3_START	9			// 10,11,12,13
-#define	BG_BAND_REGION_3_SIZE	4
-#define	BG_BAND_REGION_4_START	13			// 14
-#define	BG_BAND_REGION_4_SIZE	1
-#define	BG_BAND_REGION_5_START	0			// 1,2,3,4,5,6,7,8,9,10,11,12,13,14
-#define	BG_BAND_REGION_5_SIZE	14
-#define	BG_BAND_REGION_6_START	2			// 3,4,5,6,7,8,9
-#define	BG_BAND_REGION_6_SIZE	7
-#define	BG_BAND_REGION_7_START	4			// 5,6,7,8,9,10,11,12,13
-#define	BG_BAND_REGION_7_SIZE	9
-#define	BG_BAND_REGION_31_START	0			// 1,2,3,4,5,6,7,8,9,10,11,12,13,14
-#define	BG_BAND_REGION_31_SIZE	14
-
-// 5 Ghz channel plan index in the TxPower arrays.
-UCHAR A_BAND_REGION_0_CHANNEL_LIST[]={36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165};
-UCHAR A_BAND_REGION_1_CHANNEL_LIST[]={36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140};
-UCHAR A_BAND_REGION_2_CHANNEL_LIST[]={36, 40, 44, 48, 52, 56, 60, 64};
-UCHAR A_BAND_REGION_3_CHANNEL_LIST[]={52, 56, 60, 64, 149, 153, 157, 161};
-UCHAR A_BAND_REGION_4_CHANNEL_LIST[]={149, 153, 157, 161, 165};
-UCHAR A_BAND_REGION_5_CHANNEL_LIST[]={149, 153, 157, 161};
-UCHAR A_BAND_REGION_6_CHANNEL_LIST[]={36, 40, 44, 48};
-UCHAR A_BAND_REGION_7_CHANNEL_LIST[]={36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165};
-UCHAR A_BAND_REGION_8_CHANNEL_LIST[]={52, 56, 60, 64};
-UCHAR A_BAND_REGION_9_CHANNEL_LIST[]={36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165};
-UCHAR A_BAND_REGION_10_CHANNEL_LIST[]={36, 40, 44, 48, 149, 153, 157, 161, 165};
-UCHAR A_BAND_REGION_11_CHANNEL_LIST[]={36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161};
-
-//BaSizeArray follows the 802.11n definition as MaxRxFactor.  2^(13+factor) bytes. When factor =0, it's about Ba buffer size =8.
-UCHAR BaSizeArray[4] = {8,16,32,64};
-
-/*
-	==========================================================================
-	Description:
-		Update StaCfg->ChannelList[] according to 1) Country Region 2) RF IC type,
-		and 3) PHY-mode user selected.
-		The outcome is used by driver when doing site survey.
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID BuildChannelList(
-	IN PRTMP_ADAPTER pAd)
-{
-	UCHAR i, j, index=0, num=0;
-	PUCHAR	pChannelList = NULL;
-
-	NdisZeroMemory(pAd->ChannelList, MAX_NUM_OF_CHANNELS * sizeof(CHANNEL_TX_POWER));
-
-	// if not 11a-only mode, channel list starts from 2.4Ghz band
-	if ((pAd->CommonCfg.PhyMode != PHY_11A)
-#ifdef DOT11_N_SUPPORT
-		&& (pAd->CommonCfg.PhyMode != PHY_11AN_MIXED) && (pAd->CommonCfg.PhyMode != PHY_11N_5G)
-#endif // DOT11_N_SUPPORT //
-	)
-	{
-		switch (pAd->CommonCfg.CountryRegion  & 0x7f)
-		{
-			case REGION_0_BG_BAND:	// 1 -11
-				NdisMoveMemory(&pAd->ChannelList[index], &pAd->TxPower[BG_BAND_REGION_0_START], sizeof(CHANNEL_TX_POWER) * BG_BAND_REGION_0_SIZE);
-				index += BG_BAND_REGION_0_SIZE;
-				break;
-			case REGION_1_BG_BAND:	// 1 - 13
-				NdisMoveMemory(&pAd->ChannelList[index], &pAd->TxPower[BG_BAND_REGION_1_START], sizeof(CHANNEL_TX_POWER) * BG_BAND_REGION_1_SIZE);
-				index += BG_BAND_REGION_1_SIZE;
-				break;
-			case REGION_2_BG_BAND:	// 10 - 11
-				NdisMoveMemory(&pAd->ChannelList[index], &pAd->TxPower[BG_BAND_REGION_2_START], sizeof(CHANNEL_TX_POWER) * BG_BAND_REGION_2_SIZE);
-				index += BG_BAND_REGION_2_SIZE;
-				break;
-			case REGION_3_BG_BAND:	// 10 - 13
-				NdisMoveMemory(&pAd->ChannelList[index], &pAd->TxPower[BG_BAND_REGION_3_START], sizeof(CHANNEL_TX_POWER) * BG_BAND_REGION_3_SIZE);
-				index += BG_BAND_REGION_3_SIZE;
-				break;
-			case REGION_4_BG_BAND:	// 14
-				NdisMoveMemory(&pAd->ChannelList[index], &pAd->TxPower[BG_BAND_REGION_4_START], sizeof(CHANNEL_TX_POWER) * BG_BAND_REGION_4_SIZE);
-				index += BG_BAND_REGION_4_SIZE;
-				break;
-			case REGION_5_BG_BAND:	// 1 - 14
-				NdisMoveMemory(&pAd->ChannelList[index], &pAd->TxPower[BG_BAND_REGION_5_START], sizeof(CHANNEL_TX_POWER) * BG_BAND_REGION_5_SIZE);
-				index += BG_BAND_REGION_5_SIZE;
-				break;
-			case REGION_6_BG_BAND:	// 3 - 9
-				NdisMoveMemory(&pAd->ChannelList[index], &pAd->TxPower[BG_BAND_REGION_6_START], sizeof(CHANNEL_TX_POWER) * BG_BAND_REGION_6_SIZE);
-				index += BG_BAND_REGION_6_SIZE;
-				break;
-			case REGION_7_BG_BAND:  // 5 - 13
-				NdisMoveMemory(&pAd->ChannelList[index], &pAd->TxPower[BG_BAND_REGION_7_START], sizeof(CHANNEL_TX_POWER) * BG_BAND_REGION_7_SIZE);
-				index += BG_BAND_REGION_7_SIZE;
-				break;
-			case REGION_31_BG_BAND:	// 1 - 14
-				NdisMoveMemory(&pAd->ChannelList[index], &pAd->TxPower[BG_BAND_REGION_31_START], sizeof(CHANNEL_TX_POWER) * BG_BAND_REGION_31_SIZE);
-				index += BG_BAND_REGION_31_SIZE;
-				break;
-			default:            // Error. should never happen
-				break;
-		}
-		for (i=0; i<index; i++)
-			pAd->ChannelList[i].MaxTxPwr = 20;
-	}
-
-	if ((pAd->CommonCfg.PhyMode == PHY_11A) || (pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED)
-#ifdef DOT11_N_SUPPORT
-		|| (pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11AN_MIXED)
-		|| (pAd->CommonCfg.PhyMode == PHY_11AGN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11N_5G)
-#endif // DOT11_N_SUPPORT //
-	)
-	{
-		switch (pAd->CommonCfg.CountryRegionForABand & 0x7f)
-		{
-			case REGION_0_A_BAND:
-				num = sizeof(A_BAND_REGION_0_CHANNEL_LIST)/sizeof(UCHAR);
-				pChannelList = A_BAND_REGION_0_CHANNEL_LIST;
-				break;
-			case REGION_1_A_BAND:
-				num = sizeof(A_BAND_REGION_1_CHANNEL_LIST)/sizeof(UCHAR);
-				pChannelList = A_BAND_REGION_1_CHANNEL_LIST;
-				break;
-			case REGION_2_A_BAND:
-				num = sizeof(A_BAND_REGION_2_CHANNEL_LIST)/sizeof(UCHAR);
-				pChannelList = A_BAND_REGION_2_CHANNEL_LIST;
-				break;
-			case REGION_3_A_BAND:
-				num = sizeof(A_BAND_REGION_3_CHANNEL_LIST)/sizeof(UCHAR);
-				pChannelList = A_BAND_REGION_3_CHANNEL_LIST;
-				break;
-			case REGION_4_A_BAND:
-				num = sizeof(A_BAND_REGION_4_CHANNEL_LIST)/sizeof(UCHAR);
-				pChannelList = A_BAND_REGION_4_CHANNEL_LIST;
-				break;
-			case REGION_5_A_BAND:
-				num = sizeof(A_BAND_REGION_5_CHANNEL_LIST)/sizeof(UCHAR);
-				pChannelList = A_BAND_REGION_5_CHANNEL_LIST;
-				break;
-			case REGION_6_A_BAND:
-				num = sizeof(A_BAND_REGION_6_CHANNEL_LIST)/sizeof(UCHAR);
-				pChannelList = A_BAND_REGION_6_CHANNEL_LIST;
-				break;
-			case REGION_7_A_BAND:
-				num = sizeof(A_BAND_REGION_7_CHANNEL_LIST)/sizeof(UCHAR);
-				pChannelList = A_BAND_REGION_7_CHANNEL_LIST;
-				break;
-			case REGION_8_A_BAND:
-				num = sizeof(A_BAND_REGION_8_CHANNEL_LIST)/sizeof(UCHAR);
-				pChannelList = A_BAND_REGION_8_CHANNEL_LIST;
-				break;
-			case REGION_9_A_BAND:
-				num = sizeof(A_BAND_REGION_9_CHANNEL_LIST)/sizeof(UCHAR);
-				pChannelList = A_BAND_REGION_9_CHANNEL_LIST;
-				break;
-
-			case REGION_10_A_BAND:
-				num = sizeof(A_BAND_REGION_10_CHANNEL_LIST)/sizeof(UCHAR);
-				pChannelList = A_BAND_REGION_10_CHANNEL_LIST;
-				break;
-
-			case REGION_11_A_BAND:
-				num = sizeof(A_BAND_REGION_11_CHANNEL_LIST)/sizeof(UCHAR);
-				pChannelList = A_BAND_REGION_11_CHANNEL_LIST;
-				break;
-
-			default:            // Error. should never happen
-				DBGPRINT(RT_DEBUG_WARN,("countryregion=%d not support", pAd->CommonCfg.CountryRegionForABand));
-				break;
-		}
-
-		if (num != 0)
-		{
-			UCHAR RadarCh[15]={52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140};
-			for (i=0; i<num; i++)
-			{
-				for (j=0; j<MAX_NUM_OF_CHANNELS; j++)
-				{
-					if (pChannelList[i] == pAd->TxPower[j].Channel)
-						NdisMoveMemory(&pAd->ChannelList[index+i], &pAd->TxPower[j], sizeof(CHANNEL_TX_POWER));
-					}
-				for (j=0; j<15; j++)
-				{
-					if (pChannelList[i] == RadarCh[j])
-						pAd->ChannelList[index+i].DfsReq = TRUE;
-				}
-				pAd->ChannelList[index+i].MaxTxPwr = 20;
-			}
-			index += num;
-		}
-	}
-
-	pAd->ChannelListNum = index;
-	DBGPRINT(RT_DEBUG_TRACE,("country code=%d/%d, RFIC=%d, PHY mode=%d, support %d channels\n",
-		pAd->CommonCfg.CountryRegion, pAd->CommonCfg.CountryRegionForABand, pAd->RfIcType, pAd->CommonCfg.PhyMode, pAd->ChannelListNum));
-#ifdef DBG
-	for (i=0;i<pAd->ChannelListNum;i++)
-	{
-		DBGPRINT_RAW(RT_DEBUG_TRACE,("BuildChannel # %d :: Pwr0 = %d, Pwr1 =%d, \n ", pAd->ChannelList[i].Channel, pAd->ChannelList[i].Power, pAd->ChannelList[i].Power2));
-	}
-#endif
-}
-
-/*
-	==========================================================================
-	Description:
-		This routine return the first channel number according to the country
-		code selection and RF IC selection (signal band or dual band). It is called
-		whenever driver need to start a site survey of all supported channels.
-	Return:
-		ch - the first channel number of current country code setting
-
-	IRQL = PASSIVE_LEVEL
-
-	==========================================================================
- */
-UCHAR FirstChannel(
-	IN PRTMP_ADAPTER pAd)
-{
-	return pAd->ChannelList[0].Channel;
-}
-
-/*
-	==========================================================================
-	Description:
-		This routine returns the next channel number. This routine is called
-		during driver need to start a site survey of all supported channels.
-	Return:
-		next_channel - the next channel number valid in current country code setting.
-	Note:
-		return 0 if no more next channel
-	==========================================================================
- */
-UCHAR NextChannel(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR channel)
-{
-	int i;
-	UCHAR next_channel = 0;
-
-	for (i = 0; i < (pAd->ChannelListNum - 1); i++)
-		if (channel == pAd->ChannelList[i].Channel)
-		{
-			next_channel = pAd->ChannelList[i+1].Channel;
-			break;
-	}
-	return next_channel;
-}
-
-/*
-	==========================================================================
-	Description:
-		This routine is for Cisco Compatible Extensions 2.X
-		Spec31. AP Control of Client Transmit Power
-	Return:
-		None
-	Note:
-	   Required by Aironet dBm(mW)
-		   0dBm(1mW),   1dBm(5mW), 13dBm(20mW), 15dBm(30mW),
-		  17dBm(50mw), 20dBm(100mW)
-
-	   We supported
-		   3dBm(Lowest), 6dBm(10%), 9dBm(25%), 12dBm(50%),
-		  14dBm(75%),   15dBm(100%)
-
-		The client station's actual transmit power shall be within +/- 5dB of
-		the minimum value or next lower value.
-	==========================================================================
- */
-VOID ChangeToCellPowerLimit(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR         AironetCellPowerLimit)
-{
-	//valud 0xFF means that hasn't found power limit information
-	//from the AP's Beacon/Probe response.
-	if (AironetCellPowerLimit == 0xFF)
-		return;
-
-	if (AironetCellPowerLimit < 6) //Used Lowest Power Percentage.
-		pAd->CommonCfg.TxPowerPercentage = 6;
-	else if (AironetCellPowerLimit < 9)
-		pAd->CommonCfg.TxPowerPercentage = 10;
-	else if (AironetCellPowerLimit < 12)
-		pAd->CommonCfg.TxPowerPercentage = 25;
-	else if (AironetCellPowerLimit < 14)
-		pAd->CommonCfg.TxPowerPercentage = 50;
-	else if (AironetCellPowerLimit < 15)
-		pAd->CommonCfg.TxPowerPercentage = 75;
-	else
-		pAd->CommonCfg.TxPowerPercentage = 100; //else used maximum
-
-	if (pAd->CommonCfg.TxPowerPercentage > pAd->CommonCfg.TxPowerDefault)
-		pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault;
-
-}
-
-CHAR	ConvertToRssi(
-	IN PRTMP_ADAPTER pAd,
-	IN	CHAR			Rssi,
-	IN  UCHAR   RssiNumber)
-{
-	UCHAR	RssiOffset, LNAGain;
-
-	// Rssi equals to zero should be an invalid value
-	if (Rssi == 0)
-		return -99;
-
-	LNAGain = GET_LNA_GAIN(pAd);
-    if (pAd->LatchRfRegs.Channel > 14)
-    {
-        if (RssiNumber == 0)
-			RssiOffset = pAd->ARssiOffset0;
-		else if (RssiNumber == 1)
-			RssiOffset = pAd->ARssiOffset1;
-		else
-			RssiOffset = pAd->ARssiOffset2;
-    }
-    else
-    {
-        if (RssiNumber == 0)
-			RssiOffset = pAd->BGRssiOffset0;
-		else if (RssiNumber == 1)
-			RssiOffset = pAd->BGRssiOffset1;
-		else
-			RssiOffset = pAd->BGRssiOffset2;
-    }
-
-    return (-12 - RssiOffset - LNAGain - Rssi);
-}
-
-/*
-	==========================================================================
-	Description:
-		Scan next channel
-	==========================================================================
- */
-VOID ScanNextChannel(
-	IN PRTMP_ADAPTER pAd)
-{
-	HEADER_802_11   Hdr80211;
-	PUCHAR          pOutBuffer = NULL;
-	NDIS_STATUS     NStatus;
-	ULONG           FrameLen = 0;
-	UCHAR           SsidLen = 0, ScanType = pAd->MlmeAux.ScanType, BBPValue = 0;
-#ifdef CONFIG_STA_SUPPORT
-	USHORT          Status;
-	PHEADER_802_11  pHdr80211;
-#endif // CONFIG_STA_SUPPORT //
-	UINT			ScanTimeIn5gChannel = SHORT_CHANNEL_TIME;
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if (MONITOR_ON(pAd))
-			return;
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef RALINK_ATE
-	// Nothing to do in ATE mode.
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-	if (pAd->MlmeAux.Channel == 0)
-	{
-		if ((pAd->CommonCfg.BBPCurrentBW == BW_40)
-#ifdef CONFIG_STA_SUPPORT
-			&& (INFRA_ON(pAd)
-				|| (pAd->OpMode == OPMODE_AP))
-#endif // CONFIG_STA_SUPPORT //
-			)
-		{
-			AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
-			AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
-			BBPValue &= (~0x18);
-			BBPValue |= 0x10;
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
-			DBGPRINT(RT_DEBUG_TRACE, ("SYNC - End of SCAN, restore to 40MHz channel %d, Total BSS[%02d]\n",pAd->CommonCfg.CentralChannel, pAd->ScanTab.BssNr));
-		}
-		else
-		{
-			AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
-			AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-			DBGPRINT(RT_DEBUG_TRACE, ("SYNC - End of SCAN, restore to channel %d, Total BSS[%02d]\n",pAd->CommonCfg.Channel, pAd->ScanTab.BssNr));
-		}
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			//
-			// To prevent data lost.
-			// Send an NULL data with turned PSM bit on to current associated AP before SCAN progress.
-			// Now, we need to send an NULL data with turned PSM bit off to AP, when scan progress done
-			//
-			if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) && (INFRA_ON(pAd)))
-			{
-				NStatus = MlmeAllocateMemory(pAd, (PVOID)&pOutBuffer);
-				if (NStatus	== NDIS_STATUS_SUCCESS)
-				{
-					pHdr80211 = (PHEADER_802_11) pOutBuffer;
-					MgtMacHeaderInit(pAd, pHdr80211, SUBTYPE_NULL_FUNC, 1, pAd->CommonCfg.Bssid, pAd->CommonCfg.Bssid);
-					pHdr80211->Duration = 0;
-					pHdr80211->FC.Type = BTYPE_DATA;
-					pHdr80211->FC.PwrMgmt = (pAd->StaCfg.Psm == PWR_SAVE);
-
-					// Send using priority queue
-					MiniportMMRequest(pAd, 0, pOutBuffer, sizeof(HEADER_802_11));
-					DBGPRINT(RT_DEBUG_TRACE, ("MlmeScanReqAction -- Send PSM Data frame\n"));
-					MlmeFreeMemory(pAd, pOutBuffer);
-					RTMPusecDelay(5000);
-				}
-			}
-
-			pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
-			Status = MLME_SUCCESS;
-			MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_SCAN_CONF, 2, &Status);
-		}
-#endif // CONFIG_STA_SUPPORT //
-
-
-		RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
-	}
-#ifdef RT2870
-#ifdef CONFIG_STA_SUPPORT
-	else if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST) && (pAd->OpMode == OPMODE_STA))
-	{
-		pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
-		MlmeCntlConfirm(pAd, MT2_SCAN_CONF, MLME_FAIL_NO_RESOURCE);
-	}
-#endif // CONFIG_STA_SUPPORT //
-#endif // RT2870 //
-	else
-	{
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-		// BBP and RF are not accessible in PS mode, we has to wake them up first
-		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
-			AsicForceWakeup(pAd, TRUE);
-
-			// leave PSM during scanning. otherwise we may lost ProbeRsp & BEACON
-			if (pAd->StaCfg.Psm == PWR_SAVE)
-				MlmeSetPsmBit(pAd, PWR_ACTIVE);
-		}
-#endif // CONFIG_STA_SUPPORT //
-
-		AsicSwitchChannel(pAd, pAd->MlmeAux.Channel, TRUE);
-		AsicLockChannel(pAd, pAd->MlmeAux.Channel);
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			if (pAd->MlmeAux.Channel > 14)
-			{
-				if ((pAd->CommonCfg.bIEEE80211H == 1) && RadarChannelCheck(pAd, pAd->MlmeAux.Channel))
-				{
-					ScanType = SCAN_PASSIVE;
-					ScanTimeIn5gChannel = MIN_CHANNEL_TIME;
-				}
-			}
-
-#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier
-			// carrier detection
-			if (pAd->CommonCfg.CarrierDetect.Enable == TRUE)
-			{
-				ScanType = SCAN_PASSIVE;
-				ScanTimeIn5gChannel = MIN_CHANNEL_TIME;
-			}
-#endif // CARRIER_DETECTION_SUPPORT //
-		}
-
-#endif // CONFIG_STA_SUPPORT //
-
-		//Global country domain(ch1-11:active scan, ch12-14 passive scan)
-		if ((pAd->MlmeAux.Channel <= 14) && (pAd->MlmeAux.Channel >= 12) && ((pAd->CommonCfg.CountryRegion & 0x7f) == REGION_31_BG_BAND))
-		{
-			ScanType = SCAN_PASSIVE;
-		}
-
-		// We need to shorten active scan time in order for WZC connect issue
-		// Chnage the channel scan time for CISCO stuff based on its IAPP announcement
-		if (ScanType == FAST_SCAN_ACTIVE)
-			RTMPSetTimer(&pAd->MlmeAux.ScanTimer, FAST_ACTIVE_SCAN_TIME);
-#ifdef CONFIG_STA_SUPPORT
-		else if (((ScanType == SCAN_CISCO_ACTIVE) ||
-				(ScanType == SCAN_CISCO_PASSIVE) ||
-				(ScanType == SCAN_CISCO_CHANNEL_LOAD) ||
-				(ScanType == SCAN_CISCO_NOISE)) && (pAd->OpMode == OPMODE_STA))
-		{
-			if (pAd->StaCfg.CCXScanTime < 25)
-				RTMPSetTimer(&pAd->MlmeAux.ScanTimer, pAd->StaCfg.CCXScanTime * 2);
-			else
-				RTMPSetTimer(&pAd->MlmeAux.ScanTimer, pAd->StaCfg.CCXScanTime);
-		}
-#endif // CONFIG_STA_SUPPORT //
-		else // must be SCAN_PASSIVE or SCAN_ACTIVE
-		{
-			if ((pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED)
-#ifdef DOT11_N_SUPPORT
-				|| (pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11AGN_MIXED)
-#endif // DOT11_N_SUPPORT //
-			)
-			{
-				if (pAd->MlmeAux.Channel > 14)
-					RTMPSetTimer(&pAd->MlmeAux.ScanTimer, ScanTimeIn5gChannel);
-				else
-				RTMPSetTimer(&pAd->MlmeAux.ScanTimer, MIN_CHANNEL_TIME);
-			}
-			else
-				RTMPSetTimer(&pAd->MlmeAux.ScanTimer, MAX_CHANNEL_TIME);
-		}
-
-		if ((ScanType == SCAN_ACTIVE) || (ScanType == FAST_SCAN_ACTIVE) ||
-			(ScanType == SCAN_CISCO_ACTIVE))
-		{
-			NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-			if (NStatus != NDIS_STATUS_SUCCESS)
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("SYNC - ScanNextChannel() allocate memory fail\n"));
-#ifdef CONFIG_STA_SUPPORT
-				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				{
-					pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
-					Status = MLME_FAIL_NO_RESOURCE;
-					MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_SCAN_CONF, 2, &Status);
-				}
-#endif // CONFIG_STA_SUPPORT //
-
-				return;
-			}
-
-			// There is no need to send broadcast probe request if active scan is in effect.
-			if ((ScanType == SCAN_ACTIVE) || (ScanType == FAST_SCAN_ACTIVE)
-				)
-				SsidLen = pAd->MlmeAux.SsidLen;
-			else
-				SsidLen = 0;
-
-			MgtMacHeaderInit(pAd, &Hdr80211, SUBTYPE_PROBE_REQ, 0, BROADCAST_ADDR, BROADCAST_ADDR);
-			MakeOutgoingFrame(pOutBuffer,               &FrameLen,
-							  sizeof(HEADER_802_11),    &Hdr80211,
-							  1,                        &SsidIe,
-							  1,                        &SsidLen,
-							  SsidLen,			        pAd->MlmeAux.Ssid,
-							  1,                        &SupRateIe,
-							  1,                        &pAd->CommonCfg.SupRateLen,
-							  pAd->CommonCfg.SupRateLen,  pAd->CommonCfg.SupRate,
-							  END_OF_ARGS);
-
-			if (pAd->CommonCfg.ExtRateLen)
-			{
-				ULONG Tmp;
-				MakeOutgoingFrame(pOutBuffer + FrameLen,            &Tmp,
-								  1,                                &ExtRateIe,
-								  1,                                &pAd->CommonCfg.ExtRateLen,
-								  pAd->CommonCfg.ExtRateLen,          pAd->CommonCfg.ExtRate,
-								  END_OF_ARGS);
-				FrameLen += Tmp;
-			}
-
-#ifdef DOT11_N_SUPPORT
-			if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
-			{
-				ULONG	Tmp;
-				UCHAR	HtLen;
-				UCHAR	BROADCOM[4] = {0x0, 0x90, 0x4c, 0x33};
-#ifdef RT_BIG_ENDIAN
-				HT_CAPABILITY_IE HtCapabilityTmp;
-#endif
-				if (pAd->bBroadComHT == TRUE)
-				{
-					HtLen = pAd->MlmeAux.HtCapabilityLen + 4;
-#ifdef RT_BIG_ENDIAN
-					NdisMoveMemory(&HtCapabilityTmp, &pAd->MlmeAux.HtCapability, SIZE_HT_CAP_IE);
-					*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
-					*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
-
-					MakeOutgoingFrame(pOutBuffer + FrameLen,          &Tmp,
-									1,                                &WpaIe,
-									1,                                &HtLen,
-									4,                                &BROADCOM[0],
-									pAd->MlmeAux.HtCapabilityLen,     &HtCapabilityTmp,
-									END_OF_ARGS);
-#else
-					MakeOutgoingFrame(pOutBuffer + FrameLen,          &Tmp,
-									1,                                &WpaIe,
-									1,                                &HtLen,
-									4,                                &BROADCOM[0],
-									pAd->MlmeAux.HtCapabilityLen,     &pAd->MlmeAux.HtCapability,
-									END_OF_ARGS);
-#endif // RT_BIG_ENDIAN //
-				}
-				else
-				{
-					HtLen = pAd->MlmeAux.HtCapabilityLen;
-#ifdef RT_BIG_ENDIAN
-					NdisMoveMemory(&HtCapabilityTmp, &pAd->CommonCfg.HtCapability, SIZE_HT_CAP_IE);
-					*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
-					*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
-
-					MakeOutgoingFrame(pOutBuffer + FrameLen,          &Tmp,
-									1,                                &HtCapIe,
-									1,                                &HtLen,
-									HtLen,                            &HtCapabilityTmp,
-									END_OF_ARGS);
-#else
-					MakeOutgoingFrame(pOutBuffer + FrameLen,          &Tmp,
-									1,                                &HtCapIe,
-									1,                                &HtLen,
-									HtLen,                            &pAd->CommonCfg.HtCapability,
-									END_OF_ARGS);
-#endif // RT_BIG_ENDIAN //
-				}
-				FrameLen += Tmp;
-
-#ifdef DOT11N_DRAFT3
-				if (pAd->CommonCfg.BACapability.field.b2040CoexistScanSup == 1)
-				{
-					ULONG		Tmp;
-					HtLen = 1;
-					MakeOutgoingFrame(pOutBuffer + FrameLen,            &Tmp,
-									  1,					&ExtHtCapIe,
-									  1,					&HtLen,
-									  1,          			&pAd->CommonCfg.BSSCoexist2040.word,
-									  END_OF_ARGS);
-
-					FrameLen += Tmp;
-				}
-#endif // DOT11N_DRAFT3 //
-			}
-#endif // DOT11_N_SUPPORT //
-
-
-			MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-			MlmeFreeMemory(pAd, pOutBuffer);
-		}
-
-		// For SCAN_CISCO_PASSIVE, do nothing and silently wait for beacon or other probe reponse
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			pAd->Mlme.SyncMachine.CurrState = SCAN_LISTEN;
-#endif // CONFIG_STA_SUPPORT //
-
-	}
-}
-
-VOID MgtProbReqMacHeaderInit(
-	IN	PRTMP_ADAPTER	pAd,
-	IN OUT PHEADER_802_11 pHdr80211,
-	IN UCHAR SubType,
-	IN UCHAR ToDs,
-	IN PUCHAR pDA,
-	IN PUCHAR pBssid)
-{
-	NdisZeroMemory(pHdr80211, sizeof(HEADER_802_11));
-
-	pHdr80211->FC.Type = BTYPE_MGMT;
-	pHdr80211->FC.SubType = SubType;
-	if (SubType == SUBTYPE_ACK)
-		pHdr80211->FC.Type = BTYPE_CNTL;
-	pHdr80211->FC.ToDs = ToDs;
-	COPY_MAC_ADDR(pHdr80211->Addr1, pDA);
-	COPY_MAC_ADDR(pHdr80211->Addr2, pAd->CurrentAddress);
-	COPY_MAC_ADDR(pHdr80211->Addr3, pBssid);
-}
-
-
+#include "../../rt2860/common/cmm_sync.c"
diff --git a/drivers/staging/rt2870/common/cmm_wpa.c b/drivers/staging/rt2870/common/cmm_wpa.c
index d2c24bd49e7..04a54bb2185 100644
--- a/drivers/staging/rt2870/common/cmm_wpa.c
+++ b/drivers/staging/rt2870/common/cmm_wpa.c
@@ -1,1654 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	wpa.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Jan	Lee		03-07-22		Initial
-	Paul Lin	03-11-28		Modify for supplicant
-*/
-#include "../rt_config.h"
-// WPA OUI
-UCHAR		OUI_WPA_NONE_AKM[4]		= {0x00, 0x50, 0xF2, 0x00};
-UCHAR       OUI_WPA_VERSION[4]      = {0x00, 0x50, 0xF2, 0x01};
-UCHAR       OUI_WPA_WEP40[4]      = {0x00, 0x50, 0xF2, 0x01};
-UCHAR       OUI_WPA_TKIP[4]     = {0x00, 0x50, 0xF2, 0x02};
-UCHAR       OUI_WPA_CCMP[4]     = {0x00, 0x50, 0xF2, 0x04};
-UCHAR       OUI_WPA_WEP104[4]      = {0x00, 0x50, 0xF2, 0x05};
-UCHAR       OUI_WPA_8021X_AKM[4]	= {0x00, 0x50, 0xF2, 0x01};
-UCHAR       OUI_WPA_PSK_AKM[4]      = {0x00, 0x50, 0xF2, 0x02};
-// WPA2 OUI
-UCHAR       OUI_WPA2_WEP40[4]   = {0x00, 0x0F, 0xAC, 0x01};
-UCHAR       OUI_WPA2_TKIP[4]        = {0x00, 0x0F, 0xAC, 0x02};
-UCHAR       OUI_WPA2_CCMP[4]        = {0x00, 0x0F, 0xAC, 0x04};
-UCHAR       OUI_WPA2_8021X_AKM[4]   = {0x00, 0x0F, 0xAC, 0x01};
-UCHAR       OUI_WPA2_PSK_AKM[4]   	= {0x00, 0x0F, 0xAC, 0x02};
-UCHAR       OUI_WPA2_WEP104[4]   = {0x00, 0x0F, 0xAC, 0x05};
-// MSA OUI
-UCHAR   	OUI_MSA_8021X_AKM[4]    = {0x00, 0x0F, 0xAC, 0x05};		// Not yet final - IEEE 802.11s-D1.06
-UCHAR   	OUI_MSA_PSK_AKM[4]   	= {0x00, 0x0F, 0xAC, 0x06};		// Not yet final - IEEE 802.11s-D1.06
-
-/*
-	========================================================================
-
-	Routine Description:
-		The pseudo-random function(PRF) that hashes various inputs to
-		derive a pseudo-random value. To add liveness to the pseudo-random
-		value, a nonce should be one of the inputs.
-
-		It is used to generate PTK, GTK or some specific random value.
-
-	Arguments:
-		UCHAR	*key,		-	the key material for HMAC_SHA1 use
-		INT		key_len		-	the length of key
-		UCHAR	*prefix		-	a prefix label
-		INT		prefix_len	-	the length of the label
-		UCHAR	*data		-	a specific data with variable length
-		INT		data_len	-	the length of a specific data
-		INT		len			-	the output lenght
-
-	Return Value:
-		UCHAR	*output		-	the calculated result
-
-	Note:
-		802.11i-2004	Annex H.3
-
-	========================================================================
-*/
-VOID	PRF(
-	IN	UCHAR	*key,
-	IN	INT		key_len,
-	IN	UCHAR	*prefix,
-	IN	INT		prefix_len,
-	IN	UCHAR	*data,
-	IN	INT		data_len,
-	OUT	UCHAR	*output,
-	IN	INT		len)
-{
-	INT		i;
-    UCHAR   *input;
-	INT		currentindex = 0;
-	INT		total_len;
-
-	// Allocate memory for input
-	os_alloc_mem(NULL, (PUCHAR *)&input, 1024);
-
-    if (input == NULL)
-    {
-        DBGPRINT(RT_DEBUG_ERROR, ("!!!PRF: no memory!!!\n"));
-        return;
-    }
-
-	// Generate concatenation input
-	NdisMoveMemory(input, prefix, prefix_len);
-
-	// Concatenate a single octet containing 0
-	input[prefix_len] =	0;
-
-	// Concatenate specific data
-	NdisMoveMemory(&input[prefix_len + 1], data, data_len);
-	total_len =	prefix_len + 1 + data_len;
-
-	// Concatenate a single octet containing 0
-	// This octet shall be update later
-	input[total_len] = 0;
-	total_len++;
-
-	// Iterate to calculate the result by hmac-sha-1
-	// Then concatenate to last result
-	for	(i = 0;	i <	(len + 19) / 20; i++)
-	{
-		HMAC_SHA1(input, total_len,	key, key_len, &output[currentindex]);
-		currentindex +=	20;
-
-		// update the last octet
-		input[total_len - 1]++;
-	}
-    os_free_mem(NULL, input);
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		It utilizes PRF-384 or PRF-512 to derive session-specific keys from a PMK.
-		It shall be called by 4-way handshake processing.
-
-	Arguments:
-		pAd 	-	pointer to our pAdapter context
-		PMK		-	pointer to PMK
-		ANonce	-	pointer to ANonce
-		AA		-	pointer to Authenticator Address
-		SNonce	-	pointer to SNonce
-		SA		-	pointer to Supplicant Address
-		len		-	indicate the length of PTK (octet)
-
-	Return Value:
-		Output		pointer to the PTK
-
-	Note:
-		Refer to IEEE 802.11i-2004 8.5.1.2
-
-	========================================================================
-*/
-VOID WpaCountPTK(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR	*PMK,
-	IN	UCHAR	*ANonce,
-	IN	UCHAR	*AA,
-	IN	UCHAR	*SNonce,
-	IN	UCHAR	*SA,
-	OUT	UCHAR	*output,
-	IN	UINT	len)
-{
-	UCHAR	concatenation[76];
-	UINT	CurrPos = 0;
-	UCHAR	temp[32];
-	UCHAR	Prefix[] = {'P', 'a', 'i', 'r', 'w', 'i', 's', 'e', ' ', 'k', 'e', 'y', ' ',
-						'e', 'x', 'p', 'a', 'n', 's', 'i', 'o', 'n'};
-
-	// initiate the concatenation input
-	NdisZeroMemory(temp, sizeof(temp));
-	NdisZeroMemory(concatenation, 76);
-
-	// Get smaller address
-	if (RTMPCompareMemory(SA, AA, 6) == 1)
-		NdisMoveMemory(concatenation, AA, 6);
-	else
-		NdisMoveMemory(concatenation, SA, 6);
-	CurrPos += 6;
-
-	// Get larger address
-	if (RTMPCompareMemory(SA, AA, 6) == 1)
-		NdisMoveMemory(&concatenation[CurrPos], SA, 6);
-	else
-		NdisMoveMemory(&concatenation[CurrPos], AA, 6);
-
-	// store the larger mac address for backward compatible of
-	// ralink proprietary STA-key issue
-	NdisMoveMemory(temp, &concatenation[CurrPos], MAC_ADDR_LEN);
-	CurrPos += 6;
-
-	// Get smaller Nonce
-	if (RTMPCompareMemory(ANonce, SNonce, 32) == 0)
-		NdisMoveMemory(&concatenation[CurrPos], temp, 32);	// patch for ralink proprietary STA-key issue
-	else if (RTMPCompareMemory(ANonce, SNonce, 32) == 1)
-		NdisMoveMemory(&concatenation[CurrPos], SNonce, 32);
-	else
-		NdisMoveMemory(&concatenation[CurrPos], ANonce, 32);
-	CurrPos += 32;
-
-	// Get larger Nonce
-	if (RTMPCompareMemory(ANonce, SNonce, 32) == 0)
-		NdisMoveMemory(&concatenation[CurrPos], temp, 32);	// patch for ralink proprietary STA-key issue
-	else if (RTMPCompareMemory(ANonce, SNonce, 32) == 1)
-		NdisMoveMemory(&concatenation[CurrPos], ANonce, 32);
-	else
-		NdisMoveMemory(&concatenation[CurrPos], SNonce, 32);
-	CurrPos += 32;
-
-	hex_dump("concatenation=", concatenation, 76);
-
-	// Use PRF to generate PTK
-	PRF(PMK, LEN_MASTER_KEY, Prefix, 22, concatenation, 76, output, len);
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Generate random number by software.
-
-	Arguments:
-		pAd		-	pointer to our pAdapter context
-		macAddr	-	pointer to local MAC address
-
-	Return Value:
-
-	Note:
-		802.1ii-2004  Annex H.5
-
-	========================================================================
-*/
-VOID	GenRandom(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			*macAddr,
-	OUT	UCHAR			*random)
-{
-	INT		i, curr;
-	UCHAR	local[80], KeyCounter[32];
-	UCHAR	result[80];
-	ULONG	CurrentTime;
-	UCHAR	prefix[] = {'I', 'n', 'i', 't', ' ', 'C', 'o', 'u', 'n', 't', 'e', 'r'};
-
-	// Zero the related information
-	NdisZeroMemory(result, 80);
-	NdisZeroMemory(local, 80);
-	NdisZeroMemory(KeyCounter, 32);
-
-	for	(i = 0;	i <	32;	i++)
-	{
-		// copy the local MAC address
-		COPY_MAC_ADDR(local, macAddr);
-		curr =	MAC_ADDR_LEN;
-
-		// concatenate the current time
-		NdisGetSystemUpTime(&CurrentTime);
-		NdisMoveMemory(&local[curr],  &CurrentTime,	sizeof(CurrentTime));
-		curr +=	sizeof(CurrentTime);
-
-		// concatenate the last result
-		NdisMoveMemory(&local[curr],  result, 32);
-		curr +=	32;
-
-		// concatenate a variable
-		NdisMoveMemory(&local[curr],  &i,  2);
-		curr +=	2;
-
-		// calculate the result
-		PRF(KeyCounter, 32, prefix,12, local, curr, result, 32);
-	}
-
-	NdisMoveMemory(random, result,	32);
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Build cipher suite in RSN-IE.
-		It only shall be called by RTMPMakeRSNIE.
-
-	Arguments:
-		pAd			-	pointer to our pAdapter context
-    	ElementID	-	indicate the WPA1 or WPA2
-    	WepStatus	-	indicate the encryption type
-		bMixCipher	-	a boolean to indicate the pairwise cipher and group
-						cipher are the same or not
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-static VOID RTMPInsertRsnIeCipher(
-	IN  PRTMP_ADAPTER   pAd,
-	IN	UCHAR			ElementID,
-	IN	UINT			WepStatus,
-	IN	BOOLEAN			bMixCipher,
-	IN	UCHAR			FlexibleCipher,
-	OUT	PUCHAR			pRsnIe,
-	OUT	UCHAR			*rsn_len)
-{
-	UCHAR	PairwiseCnt;
-
-	*rsn_len = 0;
-
-	// decide WPA2 or WPA1
-	if (ElementID == Wpa2Ie)
-	{
-		RSNIE2	*pRsnie_cipher = (RSNIE2*)pRsnIe;
-
-		// Assign the verson as 1
-		pRsnie_cipher->version = 1;
-
-        switch (WepStatus)
-        {
-        	// TKIP mode
-            case Ndis802_11Encryption2Enabled:
-                NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA2_TKIP, 4);
-                pRsnie_cipher->ucount = 1;
-                NdisMoveMemory(pRsnie_cipher->ucast[0].oui, OUI_WPA2_TKIP, 4);
-                *rsn_len = sizeof(RSNIE2);
-                break;
-
-			// AES mode
-            case Ndis802_11Encryption3Enabled:
-				if (bMixCipher)
-					NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA2_TKIP, 4);
-				else
-					NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA2_CCMP, 4);
-                pRsnie_cipher->ucount = 1;
-                NdisMoveMemory(pRsnie_cipher->ucast[0].oui, OUI_WPA2_CCMP, 4);
-                *rsn_len = sizeof(RSNIE2);
-                break;
-
-			// TKIP-AES mix mode
-            case Ndis802_11Encryption4Enabled:
-                NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA2_TKIP, 4);
-
-				PairwiseCnt = 1;
-				// Insert WPA2 TKIP as the first pairwise cipher
-				if (MIX_CIPHER_WPA2_TKIP_ON(FlexibleCipher))
-				{
-                	NdisMoveMemory(pRsnie_cipher->ucast[0].oui, OUI_WPA2_TKIP, 4);
-					// Insert WPA2 AES as the secondary pairwise cipher
-					if (MIX_CIPHER_WPA2_AES_ON(FlexibleCipher))
-					{
-                		NdisMoveMemory(pRsnie_cipher->ucast[0].oui + 4, OUI_WPA2_CCMP, 4);
-						PairwiseCnt = 2;
-					}
-				}
-				else
-				{
-					// Insert WPA2 AES as the first pairwise cipher
-					NdisMoveMemory(pRsnie_cipher->ucast[0].oui, OUI_WPA2_CCMP, 4);
-				}
-
-                pRsnie_cipher->ucount = PairwiseCnt;
-                *rsn_len = sizeof(RSNIE2) + (4 * (PairwiseCnt - 1));
-                break;
-        }
-
-#ifdef CONFIG_STA_SUPPORT
-		if ((pAd->OpMode == OPMODE_STA) &&
-			(pAd->StaCfg.GroupCipher != Ndis802_11Encryption2Enabled) &&
-			(pAd->StaCfg.GroupCipher != Ndis802_11Encryption3Enabled))
-		{
-			UINT GroupCipher = pAd->StaCfg.GroupCipher;
-			switch(GroupCipher)
-			{
-				case Ndis802_11GroupWEP40Enabled:
-					NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA2_WEP40, 4);
-					break;
-				case Ndis802_11GroupWEP104Enabled:
-					NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA2_WEP104, 4);
-					break;
-			}
-		}
-#endif // CONFIG_STA_SUPPORT //
-
-		// swap for big-endian platform
-		pRsnie_cipher->version = cpu2le16(pRsnie_cipher->version);
-	    pRsnie_cipher->ucount = cpu2le16(pRsnie_cipher->ucount);
-	}
-	else
-	{
-		RSNIE	*pRsnie_cipher = (RSNIE*)pRsnIe;
-
-		// Assign OUI and version
-		NdisMoveMemory(pRsnie_cipher->oui, OUI_WPA_VERSION, 4);
-        pRsnie_cipher->version = 1;
-
-		switch (WepStatus)
-		{
-			// TKIP mode
-            case Ndis802_11Encryption2Enabled:
-                NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA_TKIP, 4);
-                pRsnie_cipher->ucount = 1;
-                NdisMoveMemory(pRsnie_cipher->ucast[0].oui, OUI_WPA_TKIP, 4);
-                *rsn_len = sizeof(RSNIE);
-                break;
-
-			// AES mode
-            case Ndis802_11Encryption3Enabled:
-				if (bMixCipher)
-					NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA_TKIP, 4);
-				else
-					NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA_CCMP, 4);
-                pRsnie_cipher->ucount = 1;
-                NdisMoveMemory(pRsnie_cipher->ucast[0].oui, OUI_WPA_CCMP, 4);
-                *rsn_len = sizeof(RSNIE);
-                break;
-
-			// TKIP-AES mix mode
-            case Ndis802_11Encryption4Enabled:
-                NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA_TKIP, 4);
-
-				PairwiseCnt = 1;
-				// Insert WPA TKIP as the first pairwise cipher
-				if (MIX_CIPHER_WPA_TKIP_ON(FlexibleCipher))
-				{
-                	NdisMoveMemory(pRsnie_cipher->ucast[0].oui, OUI_WPA_TKIP, 4);
-					// Insert WPA AES as the secondary pairwise cipher
-					if (MIX_CIPHER_WPA_AES_ON(FlexibleCipher))
-					{
-                		NdisMoveMemory(pRsnie_cipher->ucast[0].oui + 4, OUI_WPA_CCMP, 4);
-						PairwiseCnt = 2;
-					}
-				}
-				else
-				{
-					// Insert WPA AES as the first pairwise cipher
-					NdisMoveMemory(pRsnie_cipher->ucast[0].oui, OUI_WPA_CCMP, 4);
-				}
-
-                pRsnie_cipher->ucount = PairwiseCnt;
-                *rsn_len = sizeof(RSNIE) + (4 * (PairwiseCnt - 1));
-                break;
-        }
-
-#ifdef CONFIG_STA_SUPPORT
-		if ((pAd->OpMode == OPMODE_STA) &&
-			(pAd->StaCfg.GroupCipher != Ndis802_11Encryption2Enabled) &&
-			(pAd->StaCfg.GroupCipher != Ndis802_11Encryption3Enabled))
-		{
-			UINT GroupCipher = pAd->StaCfg.GroupCipher;
-			switch(GroupCipher)
-			{
-				case Ndis802_11GroupWEP40Enabled:
-					NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA_WEP40, 4);
-					break;
-				case Ndis802_11GroupWEP104Enabled:
-					NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA_WEP104, 4);
-					break;
-			}
-		}
-#endif // CONFIG_STA_SUPPORT //
-
-		// swap for big-endian platform
-		pRsnie_cipher->version = cpu2le16(pRsnie_cipher->version);
-	    pRsnie_cipher->ucount = cpu2le16(pRsnie_cipher->ucount);
-	}
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Build AKM suite in RSN-IE.
-		It only shall be called by RTMPMakeRSNIE.
-
-	Arguments:
-		pAd			-	pointer to our pAdapter context
-    	ElementID	-	indicate the WPA1 or WPA2
-    	AuthMode	-	indicate the authentication mode
-		apidx		-	indicate the interface index
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-static VOID RTMPInsertRsnIeAKM(
-	IN  PRTMP_ADAPTER   pAd,
-	IN	UCHAR			ElementID,
-	IN	UINT			AuthMode,
-	IN	UCHAR			apidx,
-	OUT	PUCHAR			pRsnIe,
-	OUT	UCHAR			*rsn_len)
-{
-	RSNIE_AUTH		*pRsnie_auth;
-
-	pRsnie_auth = (RSNIE_AUTH*)(pRsnIe + (*rsn_len));
-
-	// decide WPA2 or WPA1
-	if (ElementID == Wpa2Ie)
-	{
-		switch (AuthMode)
-        {
-            case Ndis802_11AuthModeWPA2:
-            case Ndis802_11AuthModeWPA1WPA2:
-                pRsnie_auth->acount = 1;
-                	NdisMoveMemory(pRsnie_auth->auth[0].oui, OUI_WPA2_8021X_AKM, 4);
-                break;
-
-            case Ndis802_11AuthModeWPA2PSK:
-            case Ndis802_11AuthModeWPA1PSKWPA2PSK:
-                pRsnie_auth->acount = 1;
-                	NdisMoveMemory(pRsnie_auth->auth[0].oui, OUI_WPA2_PSK_AKM, 4);
-                break;
-        }
-	}
-	else
-	{
-		switch (AuthMode)
-        {
-            case Ndis802_11AuthModeWPA:
-            case Ndis802_11AuthModeWPA1WPA2:
-                pRsnie_auth->acount = 1;
-                NdisMoveMemory(pRsnie_auth->auth[0].oui, OUI_WPA_8021X_AKM, 4);
-                break;
-
-            case Ndis802_11AuthModeWPAPSK:
-            case Ndis802_11AuthModeWPA1PSKWPA2PSK:
-                pRsnie_auth->acount = 1;
-                NdisMoveMemory(pRsnie_auth->auth[0].oui, OUI_WPA_PSK_AKM, 4);
-                break;
-
-			case Ndis802_11AuthModeWPANone:
-                pRsnie_auth->acount = 1;
-                NdisMoveMemory(pRsnie_auth->auth[0].oui, OUI_WPA_NONE_AKM, 4);
-                break;
-        }
-	}
-
-	pRsnie_auth->acount = cpu2le16(pRsnie_auth->acount);
-
-	(*rsn_len) += sizeof(RSNIE_AUTH);	// update current RSNIE length
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Build capability in RSN-IE.
-		It only shall be called by RTMPMakeRSNIE.
-
-	Arguments:
-		pAd			-	pointer to our pAdapter context
-    	ElementID	-	indicate the WPA1 or WPA2
-		apidx		-	indicate the interface index
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-static VOID RTMPInsertRsnIeCap(
-	IN  PRTMP_ADAPTER   pAd,
-	IN	UCHAR			ElementID,
-	IN	UCHAR			apidx,
-	OUT	PUCHAR			pRsnIe,
-	OUT	UCHAR			*rsn_len)
-{
-	RSN_CAPABILITIES    *pRSN_Cap;
-
-	// it could be ignored in WPA1 mode
-	if (ElementID == WpaIe)
-		return;
-
-	pRSN_Cap = (RSN_CAPABILITIES*)(pRsnIe + (*rsn_len));
-
-
-	pRSN_Cap->word = cpu2le16(pRSN_Cap->word);
-
-	(*rsn_len) += sizeof(RSN_CAPABILITIES);	// update current RSNIE length
-
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Build RSN IE context. It is not included element-ID and length.
-
-	Arguments:
-		pAd			-	pointer to our pAdapter context
-    	AuthMode	-	indicate the authentication mode
-    	WepStatus	-	indicate the encryption type
-		apidx		-	indicate the interface index
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-VOID RTMPMakeRSNIE(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  UINT            AuthMode,
-    IN  UINT            WepStatus,
-	IN	UCHAR			apidx)
-{
-	PUCHAR		pRsnIe = NULL;			// primary RSNIE
-	UCHAR 		*rsnielen_cur_p = 0;	// the length of the primary RSNIE
-	UCHAR		*rsnielen_ex_cur_p = 0;	// the length of the secondary RSNIE
-	UCHAR		PrimaryRsnie;
-	BOOLEAN		bMixCipher = FALSE;	// indicate the pairwise and group cipher are different
-	UCHAR		p_offset;
-	WPA_MIX_PAIR_CIPHER		FlexibleCipher = MIX_CIPHER_NOTUSE;	// it provide the more flexible cipher combination in WPA-WPA2 and TKIPAES mode
-
-	rsnielen_cur_p = NULL;
-	rsnielen_ex_cur_p = NULL;
-
-	{
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-#ifdef WPA_SUPPLICANT_SUPPORT
-			if (pAd->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
-			{
-				if (AuthMode < Ndis802_11AuthModeWPA)
-					return;
-			}
-			else
-#endif // WPA_SUPPLICANT_SUPPORT //
-			{
-				// Support WPAPSK or WPA2PSK in STA-Infra mode
-				// Support WPANone in STA-Adhoc mode
-				if ((AuthMode != Ndis802_11AuthModeWPAPSK) &&
-					(AuthMode != Ndis802_11AuthModeWPA2PSK) &&
-					(AuthMode != Ndis802_11AuthModeWPANone)
-					)
-					return;
-			}
-
-			DBGPRINT(RT_DEBUG_TRACE,("==> RTMPMakeRSNIE(STA)\n"));
-
-			// Zero RSNIE context
-			pAd->StaCfg.RSNIE_Len = 0;
-			NdisZeroMemory(pAd->StaCfg.RSN_IE, MAX_LEN_OF_RSNIE);
-
-			// Pointer to RSNIE
-			rsnielen_cur_p = &pAd->StaCfg.RSNIE_Len;
-			pRsnIe = pAd->StaCfg.RSN_IE;
-
-			bMixCipher = pAd->StaCfg.bMixCipher;
-		}
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-	// indicate primary RSNIE as WPA or WPA2
-	if ((AuthMode == Ndis802_11AuthModeWPA) ||
-		(AuthMode == Ndis802_11AuthModeWPAPSK) ||
-		(AuthMode == Ndis802_11AuthModeWPANone) ||
-		(AuthMode == Ndis802_11AuthModeWPA1WPA2) ||
-		(AuthMode == Ndis802_11AuthModeWPA1PSKWPA2PSK))
-		PrimaryRsnie = WpaIe;
-	else
-		PrimaryRsnie = Wpa2Ie;
-
-	{
-		// Build the primary RSNIE
-		// 1. insert cipher suite
-		RTMPInsertRsnIeCipher(pAd, PrimaryRsnie, WepStatus, bMixCipher, FlexibleCipher, pRsnIe, &p_offset);
-
-		// 2. insert AKM
-		RTMPInsertRsnIeAKM(pAd, PrimaryRsnie, AuthMode, apidx, pRsnIe, &p_offset);
-
-		// 3. insert capability
-		RTMPInsertRsnIeCap(pAd, PrimaryRsnie, apidx, pRsnIe, &p_offset);
-	}
-
-	// 4. update the RSNIE length
-	*rsnielen_cur_p = p_offset;
-
-	hex_dump("The primary RSNIE", pRsnIe, (*rsnielen_cur_p));
-
-
-}
-
-/*
-    ==========================================================================
-    Description:
-		Check whether the received frame is EAP frame.
-
-	Arguments:
-		pAd				-	pointer to our pAdapter context
-		pEntry			-	pointer to active entry
-		pData			-	the received frame
-		DataByteCount 	-	the received frame's length
-		FromWhichBSSID	-	indicate the interface index
-
-    Return:
-         TRUE 			-	This frame is EAP frame
-         FALSE 			-	otherwise
-    ==========================================================================
-*/
-BOOLEAN RTMPCheckWPAframe(
-    IN PRTMP_ADAPTER    pAd,
-    IN PMAC_TABLE_ENTRY	pEntry,
-    IN PUCHAR           pData,
-    IN ULONG            DataByteCount,
-	IN UCHAR			FromWhichBSSID)
-{
-	ULONG	Body_len;
-	BOOLEAN Cancelled;
-
-
-    if(DataByteCount < (LENGTH_802_1_H + LENGTH_EAPOL_H))
-        return FALSE;
-
-
-	// Skip LLC header
-    if (NdisEqualMemory(SNAP_802_1H, pData, 6) ||
-        // Cisco 1200 AP may send packet with SNAP_BRIDGE_TUNNEL
-        NdisEqualMemory(SNAP_BRIDGE_TUNNEL, pData, 6))
-    {
-        pData += 6;
-    }
-	// Skip 2-bytes EAPoL type
-    if (NdisEqualMemory(EAPOL, pData, 2))
-    {
-        pData += 2;
-    }
-    else
-        return FALSE;
-
-    switch (*(pData+1))
-    {
-        case EAPPacket:
-			Body_len = (*(pData+2)<<8) | (*(pData+3));
-            DBGPRINT(RT_DEBUG_TRACE, ("Receive EAP-Packet frame, TYPE = 0, Length = %ld\n", Body_len));
-            break;
-        case EAPOLStart:
-            DBGPRINT(RT_DEBUG_TRACE, ("Receive EAPOL-Start frame, TYPE = 1 \n"));
-			if (pEntry->EnqueueEapolStartTimerRunning != EAPOL_START_DISABLE)
-            {
-            	DBGPRINT(RT_DEBUG_TRACE, ("Cancel the EnqueueEapolStartTimerRunning \n"));
-                RTMPCancelTimer(&pEntry->EnqueueStartForPSKTimer, &Cancelled);
-                pEntry->EnqueueEapolStartTimerRunning = EAPOL_START_DISABLE;
-            }
-            break;
-        case EAPOLLogoff:
-            DBGPRINT(RT_DEBUG_TRACE, ("Receive EAPOLLogoff frame, TYPE = 2 \n"));
-            break;
-        case EAPOLKey:
-			Body_len = (*(pData+2)<<8) | (*(pData+3));
-            DBGPRINT(RT_DEBUG_TRACE, ("Receive EAPOL-Key frame, TYPE = 3, Length = %ld\n", Body_len));
-            break;
-        case EAPOLASFAlert:
-            DBGPRINT(RT_DEBUG_TRACE, ("Receive EAPOLASFAlert frame, TYPE = 4 \n"));
-            break;
-        default:
-            return FALSE;
-
-    }
-    return TRUE;
-}
-
-
-/*
-    ==========================================================================
-    Description:
-        ENCRYPT AES GTK before sending in EAPOL frame.
-        AES GTK length = 128 bit,  so fix blocks for aes-key-wrap as 2 in this function.
-        This function references to RFC 3394 for aes key wrap algorithm.
-    Return:
-    ==========================================================================
-*/
-VOID AES_GTK_KEY_WRAP(
-    IN UCHAR    *key,
-    IN UCHAR    *plaintext,
-    IN UCHAR    p_len,
-    OUT UCHAR   *ciphertext)
-{
-    UCHAR       A[8], BIN[16], BOUT[16];
-    UCHAR       R[512];
-    INT         num_blocks = p_len/8;   // unit:64bits
-    INT         i, j;
-    aes_context aesctx;
-    UCHAR       xor;
-
-    rtmp_aes_set_key(&aesctx, key, 128);
-
-    // Init IA
-    for (i = 0; i < 8; i++)
-        A[i] = 0xa6;
-
-    //Input plaintext
-    for (i = 0; i < num_blocks; i++)
-    {
-        for (j = 0 ; j < 8; j++)
-            R[8 * (i + 1) + j] = plaintext[8 * i + j];
-    }
-
-    // Key Mix
-    for (j = 0; j < 6; j++)
-    {
-        for(i = 1; i <= num_blocks; i++)
-        {
-            //phase 1
-            NdisMoveMemory(BIN, A, 8);
-            NdisMoveMemory(&BIN[8], &R[8 * i], 8);
-            rtmp_aes_encrypt(&aesctx, BIN, BOUT);
-
-            NdisMoveMemory(A, &BOUT[0], 8);
-            xor = num_blocks * j + i;
-            A[7] = BOUT[7] ^ xor;
-            NdisMoveMemory(&R[8 * i], &BOUT[8], 8);
-        }
-    }
-
-    // Output ciphertext
-    NdisMoveMemory(ciphertext, A, 8);
-
-    for (i = 1; i <= num_blocks; i++)
-    {
-        for (j = 0 ; j < 8; j++)
-            ciphertext[8 * i + j] = R[8 * i + j];
-    }
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Misc function to decrypt AES body
-
-	Arguments:
-
-	Return Value:
-
-	Note:
-		This function references to	RFC	3394 for aes key unwrap algorithm.
-
-	========================================================================
-*/
-VOID	AES_GTK_KEY_UNWRAP(
-	IN	UCHAR	*key,
-	OUT	UCHAR	*plaintext,
-	IN	UCHAR    c_len,
-	IN	UCHAR	*ciphertext)
-
-{
-	UCHAR       A[8], BIN[16], BOUT[16];
-	UCHAR       xor;
-	INT         i, j;
-	aes_context aesctx;
-	UCHAR       *R;
-	INT         num_blocks = c_len/8;	// unit:64bits
-
-
-	os_alloc_mem(NULL, (PUCHAR *)&R, 512);
-
-	if (R == NULL)
-    {
-        DBGPRINT(RT_DEBUG_ERROR, ("!!!AES_GTK_KEY_UNWRAP: no memory!!!\n"));
-        return;
-    } /* End of if */
-
-	// Initialize
-	NdisMoveMemory(A, ciphertext, 8);
-	//Input plaintext
-	for(i = 0; i < (c_len-8); i++)
-	{
-		R[ i] = ciphertext[i + 8];
-	}
-
-	rtmp_aes_set_key(&aesctx, key, 128);
-
-	for(j = 5; j >= 0; j--)
-	{
-		for(i = (num_blocks-1); i > 0; i--)
-		{
-			xor = (num_blocks -1 )* j + i;
-			NdisMoveMemory(BIN, A, 8);
-			BIN[7] = A[7] ^ xor;
-			NdisMoveMemory(&BIN[8], &R[(i-1)*8], 8);
-			rtmp_aes_decrypt(&aesctx, BIN, BOUT);
-			NdisMoveMemory(A, &BOUT[0], 8);
-			NdisMoveMemory(&R[(i-1)*8], &BOUT[8], 8);
-		}
-	}
-
-	// OUTPUT
-	for(i = 0; i < c_len; i++)
-	{
-		plaintext[i] = R[i];
-	}
-
-
-	os_free_mem(NULL, R);
-}
-
-/*
-    ==========================================================================
-    Description:
-		Report the EAP message type
-
-	Arguments:
-		msg		-	EAPOL_PAIR_MSG_1
-					EAPOL_PAIR_MSG_2
-					EAPOL_PAIR_MSG_3
-					EAPOL_PAIR_MSG_4
-					EAPOL_GROUP_MSG_1
-					EAPOL_GROUP_MSG_2
-
-    Return:
-         message type string
-
-    ==========================================================================
-*/
-CHAR *GetEapolMsgType(CHAR msg)
-{
-    if(msg == EAPOL_PAIR_MSG_1)
-        return "Pairwise Message 1";
-    else if(msg == EAPOL_PAIR_MSG_2)
-        return "Pairwise Message 2";
-	else if(msg == EAPOL_PAIR_MSG_3)
-        return "Pairwise Message 3";
-	else if(msg == EAPOL_PAIR_MSG_4)
-        return "Pairwise Message 4";
-	else if(msg == EAPOL_GROUP_MSG_1)
-        return "Group Message 1";
-	else if(msg == EAPOL_GROUP_MSG_2)
-        return "Group Message 2";
-    else
-    	return "Invalid Message";
-}
-
-
-/*
-    ========================================================================
-
-    Routine Description:
-    Check Sanity RSN IE of EAPoL message
-
-    Arguments:
-
-    Return Value:
-
-
-    ========================================================================
-*/
-BOOLEAN RTMPCheckRSNIE(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pData,
-	IN  UCHAR           DataLen,
-	IN  MAC_TABLE_ENTRY *pEntry,
-	OUT	UCHAR			*Offset)
-{
-	PUCHAR              pVIE;
-	UCHAR               len;
-	PEID_STRUCT         pEid;
-	BOOLEAN				result = FALSE;
-
-	pVIE = pData;
-	len	 = DataLen;
-	*Offset = 0;
-
-	while (len > sizeof(RSNIE2))
-	{
-		pEid = (PEID_STRUCT) pVIE;
-		// WPA RSN IE
-		if ((pEid->Eid == IE_WPA) && (NdisEqualMemory(pEid->Octet, WPA_OUI, 4)))
-		{
-			if ((pEntry->AuthMode == Ndis802_11AuthModeWPA || pEntry->AuthMode == Ndis802_11AuthModeWPAPSK) &&
-				(NdisEqualMemory(pVIE, pEntry->RSN_IE, pEntry->RSNIE_Len)) &&
-				(pEntry->RSNIE_Len == (pEid->Len + 2)))
-			{
-					result = TRUE;
-			}
-
-			*Offset += (pEid->Len + 2);
-		}
-		// WPA2 RSN IE
-		else if ((pEid->Eid == IE_RSN) && (NdisEqualMemory(pEid->Octet + 2, RSN_OUI, 3)))
-		{
-			if ((pEntry->AuthMode == Ndis802_11AuthModeWPA2 || pEntry->AuthMode == Ndis802_11AuthModeWPA2PSK) &&
-				(NdisEqualMemory(pVIE, pEntry->RSN_IE, pEntry->RSNIE_Len)) &&
-				(pEntry->RSNIE_Len == (pEid->Len + 2))/* ToDo-AlbertY for mesh*/)
-			{
-					result = TRUE;
-			}
-
-			*Offset += (pEid->Len + 2);
-		}
-		else
-		{
-			break;
-		}
-
-		pVIE += (pEid->Len + 2);
-		len  -= (pEid->Len + 2);
-	}
-
-
-	return result;
-
-}
-
-
-/*
-    ========================================================================
-
-    Routine Description:
-    Parse KEYDATA field.  KEYDATA[] May contain 2 RSN IE and optionally GTK.
-    GTK  is encaptulated in KDE format at  p.83 802.11i D10
-
-    Arguments:
-
-    Return Value:
-
-    Note:
-        802.11i D10
-
-    ========================================================================
-*/
-BOOLEAN RTMPParseEapolKeyData(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pKeyData,
-	IN  UCHAR           KeyDataLen,
-	IN	UCHAR			GroupKeyIndex,
-	IN	UCHAR			MsgType,
-	IN	BOOLEAN			bWPA2,
-	IN  MAC_TABLE_ENTRY *pEntry)
-{
-    PKDE_ENCAP          pKDE = NULL;
-    PUCHAR              pMyKeyData = pKeyData;
-    UCHAR               KeyDataLength = KeyDataLen;
-    UCHAR               GTKLEN = 0;
-	UCHAR				DefaultIdx = 0;
-	UCHAR				skip_offset;
-
-	// Verify The RSN IE contained in pairewise_msg_2 && pairewise_msg_3 and skip it
-	if (MsgType == EAPOL_PAIR_MSG_2 || MsgType == EAPOL_PAIR_MSG_3)
-    {
-		// Check RSN IE whether it is WPA2/WPA2PSK
-		if (!RTMPCheckRSNIE(pAd, pKeyData, KeyDataLen, pEntry, &skip_offset))
-		{
-			// send wireless event - for RSN IE different
-			if (pAd->CommonCfg.bWirelessEvent)
-				RTMPSendWirelessEvent(pAd, IW_RSNIE_DIFF_EVENT_FLAG, pEntry->Addr, pEntry->apidx, 0);
-
-        	DBGPRINT(RT_DEBUG_ERROR, ("RSN_IE Different in msg %d of 4-way handshake!\n", MsgType));
-			hex_dump("Receive RSN_IE ", pKeyData, KeyDataLen);
-			hex_dump("Desired RSN_IE ", pEntry->RSN_IE, pEntry->RSNIE_Len);
-
-			return FALSE;
-    	}
-    	else
-		{
-			if (bWPA2 && MsgType == EAPOL_PAIR_MSG_3)
-			{
-				// skip RSN IE
-				pMyKeyData += skip_offset;
-				KeyDataLength -= skip_offset;
-				DBGPRINT(RT_DEBUG_TRACE, ("RTMPParseEapolKeyData ==> WPA2/WPA2PSK RSN IE matched in Msg 3, Length(%d) \n", skip_offset));
-			}
-			else
-				return TRUE;
-		}
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE,("RTMPParseEapolKeyData ==> KeyDataLength %d without RSN_IE \n", KeyDataLength));
-
-	// Parse EKD format in pairwise_msg_3_WPA2 && group_msg_1_WPA2
-	if (bWPA2 && (MsgType == EAPOL_PAIR_MSG_3 || MsgType == EAPOL_GROUP_MSG_1))
-	{
-		if (KeyDataLength >= 8)	// KDE format exclude GTK length
-    	{
-        	pKDE = (PKDE_ENCAP) pMyKeyData;
-
-
-			DefaultIdx = pKDE->GTKEncap.Kid;
-
-			// Sanity check - KED length
-			if (KeyDataLength < (pKDE->Len + 2))
-    		{
-        		DBGPRINT(RT_DEBUG_ERROR, ("ERROR: The len from KDE is too short \n"));
-        		return FALSE;
-    		}
-
-			// Get GTK length - refer to IEEE 802.11i-2004 p.82
-			GTKLEN = pKDE->Len -6;
-			if (GTKLEN < LEN_AES_KEY)
-			{
-				DBGPRINT(RT_DEBUG_ERROR, ("ERROR: GTK Key length is too short (%d) \n", GTKLEN));
-        		return FALSE;
-			}
-
-    	}
-		else
-    	{
-			DBGPRINT(RT_DEBUG_ERROR, ("ERROR: KDE format length is too short \n"));
-	        return FALSE;
-    	}
-
-		DBGPRINT(RT_DEBUG_TRACE, ("GTK in KDE format ,DefaultKeyID=%d, KeyLen=%d \n", DefaultIdx, GTKLEN));
-		// skip it
-		pMyKeyData += 8;
-		KeyDataLength -= 8;
-
-	}
-	else if (!bWPA2 && MsgType == EAPOL_GROUP_MSG_1)
-	{
-		DefaultIdx = GroupKeyIndex;
-		DBGPRINT(RT_DEBUG_TRACE, ("GTK DefaultKeyID=%d \n", DefaultIdx));
-	}
-
-	// Sanity check - shared key index must be 1 ~ 3
-	if (DefaultIdx < 1 || DefaultIdx > 3)
-    {
-     	DBGPRINT(RT_DEBUG_ERROR, ("ERROR: GTK Key index(%d) is invalid in %s %s \n", DefaultIdx, ((bWPA2) ? "WPA2" : "WPA"), GetEapolMsgType(MsgType)));
-        return FALSE;
-    }
-
-
-#ifdef CONFIG_STA_SUPPORT
-	// Todo
-#endif // CONFIG_STA_SUPPORT //
-
-	return TRUE;
-
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Construct EAPoL message for WPA handshaking
-		Its format is below,
-
-		+--------------------+
-		| Protocol Version	 |  1 octet
-		+--------------------+
-		| Protocol Type		 |	1 octet
-		+--------------------+
-		| Body Length		 |  2 octets
-		+--------------------+
-		| Descriptor Type	 |	1 octet
-		+--------------------+
-		| Key Information    |	2 octets
-		+--------------------+
-		| Key Length	     |  1 octet
-		+--------------------+
-		| Key Repaly Counter |	8 octets
-		+--------------------+
-		| Key Nonce		     |  32 octets
-		+--------------------+
-		| Key IV			 |  16 octets
-		+--------------------+
-		| Key RSC			 |  8 octets
-		+--------------------+
-		| Key ID or Reserved |	8 octets
-		+--------------------+
-		| Key MIC			 |	16 octets
-		+--------------------+
-		| Key Data Length	 |	2 octets
-		+--------------------+
-		| Key Data			 |	n octets
-		+--------------------+
-
-
-	Arguments:
-		pAd			Pointer	to our adapter
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	ConstructEapolMsg(
-	IN 	PRTMP_ADAPTER    	pAd,
-    IN 	UCHAR				AuthMode,
-    IN 	UCHAR				WepStatus,
-    IN 	UCHAR				GroupKeyWepStatus,
-    IN 	UCHAR				MsgType,
-    IN	UCHAR				DefaultKeyIdx,
-    IN 	UCHAR				*ReplayCounter,
-	IN 	UCHAR				*KeyNonce,
-	IN	UCHAR				*TxRSC,
-	IN	UCHAR				*PTK,
-	IN	UCHAR				*GTK,
-	IN	UCHAR				*RSNIE,
-	IN	UCHAR				RSNIE_Len,
-    OUT PEAPOL_PACKET       pMsg)
-{
-	BOOLEAN	bWPA2 = FALSE;
-
-	// Choose WPA2 or not
-	if ((AuthMode == Ndis802_11AuthModeWPA2) || (AuthMode == Ndis802_11AuthModeWPA2PSK))
-		bWPA2 = TRUE;
-
-    // Init Packet and Fill header
-    pMsg->ProVer = EAPOL_VER;
-    pMsg->ProType = EAPOLKey;
-
-	// Default 95 bytes, the EAPoL-Key descriptor exclude Key-data field
-	pMsg->Body_Len[1] = LEN_EAPOL_KEY_MSG;
-
-	// Fill in EAPoL descriptor
-	if (bWPA2)
-		pMsg->KeyDesc.Type = WPA2_KEY_DESC;
-	else
-		pMsg->KeyDesc.Type = WPA1_KEY_DESC;
-
-	// Fill in Key information, refer to IEEE Std 802.11i-2004 page 78
-	// When either the pairwise or the group cipher is AES, the DESC_TYPE_AES(2) shall be used.
-	pMsg->KeyDesc.KeyInfo.KeyDescVer =
-        	(((WepStatus == Ndis802_11Encryption3Enabled) || (GroupKeyWepStatus == Ndis802_11Encryption3Enabled)) ? (DESC_TYPE_AES) : (DESC_TYPE_TKIP));
-
-	// Specify Key Type as Group(0) or Pairwise(1)
-	if (MsgType >= EAPOL_GROUP_MSG_1)
-		pMsg->KeyDesc.KeyInfo.KeyType = GROUPKEY;
-	else
-		pMsg->KeyDesc.KeyInfo.KeyType = PAIRWISEKEY;
-
-	// Specify Key Index, only group_msg1_WPA1
-	if (!bWPA2 && (MsgType >= EAPOL_GROUP_MSG_1))
-		pMsg->KeyDesc.KeyInfo.KeyIndex = DefaultKeyIdx;
-
-	if (MsgType == EAPOL_PAIR_MSG_3)
-		pMsg->KeyDesc.KeyInfo.Install = 1;
-
-	if ((MsgType == EAPOL_PAIR_MSG_1) || (MsgType == EAPOL_PAIR_MSG_3) || (MsgType == EAPOL_GROUP_MSG_1))
-		pMsg->KeyDesc.KeyInfo.KeyAck = 1;
-
-	if (MsgType != EAPOL_PAIR_MSG_1)
-		pMsg->KeyDesc.KeyInfo.KeyMic = 1;
-
-	if ((bWPA2 && (MsgType >= EAPOL_PAIR_MSG_3)) || (!bWPA2 && (MsgType >= EAPOL_GROUP_MSG_1)))
-    {
-       	pMsg->KeyDesc.KeyInfo.Secure = 1;
-    }
-
-	if (bWPA2 && ((MsgType == EAPOL_PAIR_MSG_3) || (MsgType == EAPOL_GROUP_MSG_1)))
-    {
-        pMsg->KeyDesc.KeyInfo.EKD_DL = 1;
-    }
-
-	// key Information element has done.
-	*(USHORT *)(&pMsg->KeyDesc.KeyInfo) = cpu2le16(*(USHORT *)(&pMsg->KeyDesc.KeyInfo));
-
-	// Fill in Key Length
-#if 0
-	if (bWPA2)
-	{
-		// In WPA2 mode, the field indicates the length of pairwise key cipher,
-		// so only pairwise_msg_1 and pairwise_msg_3 need to fill.
-		if ((MsgType == EAPOL_PAIR_MSG_1) || (MsgType == EAPOL_PAIR_MSG_3))
-			pMsg->KeyDesc.KeyLength[1] = ((WepStatus == Ndis802_11Encryption2Enabled) ? LEN_TKIP_KEY : LEN_AES_KEY);
-	}
-	else if (!bWPA2)
-#endif
-	{
-		if (MsgType >= EAPOL_GROUP_MSG_1)
-		{
-			// the length of group key cipher
-			pMsg->KeyDesc.KeyLength[1] = ((GroupKeyWepStatus == Ndis802_11Encryption2Enabled) ? TKIP_GTK_LENGTH : LEN_AES_KEY);
-		}
-		else
-		{
-			// the length of pairwise key cipher
-			pMsg->KeyDesc.KeyLength[1] = ((WepStatus == Ndis802_11Encryption2Enabled) ? LEN_TKIP_KEY : LEN_AES_KEY);
-		}
-	}
-
- 	// Fill in replay counter
-    NdisMoveMemory(pMsg->KeyDesc.ReplayCounter, ReplayCounter, LEN_KEY_DESC_REPLAY);
-
-	// Fill Key Nonce field
-	// ANonce : pairwise_msg1 & pairwise_msg3
-	// SNonce : pairwise_msg2
-	// GNonce : group_msg1_wpa1
-	if ((MsgType <= EAPOL_PAIR_MSG_3) || ((!bWPA2 && (MsgType == EAPOL_GROUP_MSG_1))))
-    	NdisMoveMemory(pMsg->KeyDesc.KeyNonce, KeyNonce, LEN_KEY_DESC_NONCE);
-
-	// Fill key IV - WPA2 as 0, WPA1 as random
-	if (!bWPA2 && (MsgType == EAPOL_GROUP_MSG_1))
-	{
-		// Suggest IV be random number plus some number,
-		NdisMoveMemory(pMsg->KeyDesc.KeyIv, &KeyNonce[16], LEN_KEY_DESC_IV);
-        pMsg->KeyDesc.KeyIv[15] += 2;
-	}
-
-    // Fill Key RSC field
-    // It contains the RSC for the GTK being installed.
-	if ((MsgType == EAPOL_PAIR_MSG_3 && bWPA2) || (MsgType == EAPOL_GROUP_MSG_1))
-	{
-        NdisMoveMemory(pMsg->KeyDesc.KeyRsc, TxRSC, 6);
-	}
-
-	// Clear Key MIC field for MIC calculation later
-    NdisZeroMemory(pMsg->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
-
-	ConstructEapolKeyData(pAd,
-						  AuthMode,
-						  WepStatus,
-						  GroupKeyWepStatus,
-						  MsgType,
-						  DefaultKeyIdx,
-						  bWPA2,
-						  PTK,
-						  GTK,
-						  RSNIE,
-						  RSNIE_Len,
-						  pMsg);
-
-	// Calculate MIC and fill in KeyMic Field except Pairwise Msg 1.
-	if (MsgType != EAPOL_PAIR_MSG_1)
-	{
-		CalculateMIC(pAd, WepStatus, PTK, pMsg);
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("===> ConstructEapolMsg for %s %s\n", ((bWPA2) ? "WPA2" : "WPA"), GetEapolMsgType(MsgType)));
-	DBGPRINT(RT_DEBUG_TRACE, ("	     Body length = %d \n", pMsg->Body_Len[1]));
-	DBGPRINT(RT_DEBUG_TRACE, ("	     Key length  = %d \n", pMsg->KeyDesc.KeyLength[1]));
-
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Construct the Key Data field of EAPoL message
-
-	Arguments:
-		pAd			Pointer	to our adapter
-		Elem		Message body
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	ConstructEapolKeyData(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			AuthMode,
-	IN	UCHAR			WepStatus,
-	IN	UCHAR			GroupKeyWepStatus,
-	IN 	UCHAR			MsgType,
-	IN	UCHAR			DefaultKeyIdx,
-	IN	BOOLEAN			bWPA2Capable,
-	IN	UCHAR			*PTK,
-	IN	UCHAR			*GTK,
-	IN	UCHAR			*RSNIE,
-	IN	UCHAR			RSNIE_LEN,
-	OUT PEAPOL_PACKET   pMsg)
-{
-	UCHAR		*mpool, *Key_Data, *Rc4GTK;
-	UCHAR       ekey[(LEN_KEY_DESC_IV+LEN_EAP_EK)];
-	UCHAR		data_offset;
-
-
-	if (MsgType == EAPOL_PAIR_MSG_1 || MsgType == EAPOL_PAIR_MSG_4 || MsgType == EAPOL_GROUP_MSG_2)
-		return;
-
-	// allocate memory pool
-	os_alloc_mem(pAd, (PUCHAR *)&mpool, 1500);
-
-    if (mpool == NULL)
-		return;
-
-	/* Rc4GTK Len = 512 */
-	Rc4GTK = (UCHAR *) ROUND_UP(mpool, 4);
-	/* Key_Data Len = 512 */
-	Key_Data = (UCHAR *) ROUND_UP(Rc4GTK + 512, 4);
-
-	NdisZeroMemory(Key_Data, 512);
-	pMsg->KeyDesc.KeyDataLen[1] = 0;
-	data_offset = 0;
-
-	// Encapsulate RSNIE in pairwise_msg2 & pairwise_msg3
-	if (RSNIE_LEN && ((MsgType == EAPOL_PAIR_MSG_2) || (MsgType == EAPOL_PAIR_MSG_3)))
-	{
-		if (bWPA2Capable)
-			Key_Data[data_offset + 0] = IE_WPA2;
-		else
-			Key_Data[data_offset + 0] = IE_WPA;
-
-        Key_Data[data_offset + 1] = RSNIE_LEN;
-		NdisMoveMemory(&Key_Data[data_offset + 2], RSNIE, RSNIE_LEN);
-		data_offset += (2 + RSNIE_LEN);
-	}
-
-	// Encapsulate KDE format in pairwise_msg3_WPA2 & group_msg1_WPA2
-	if (bWPA2Capable && ((MsgType == EAPOL_PAIR_MSG_3) || (MsgType == EAPOL_GROUP_MSG_1)))
-	{
-		// Key Data Encapsulation (KDE) format - 802.11i-2004  Figure-43w and Table-20h
-        Key_Data[data_offset + 0] = 0xDD;
-
-		if (GroupKeyWepStatus == Ndis802_11Encryption3Enabled)
-		{
-			Key_Data[data_offset + 1] = 0x16;// 4+2+16(OUI+DataType+DataField)
-		}
-		else
-		{
-			Key_Data[data_offset + 1] = 0x26;// 4+2+32(OUI+DataType+DataField)
-		}
-
-        Key_Data[data_offset + 2] = 0x00;
-        Key_Data[data_offset + 3] = 0x0F;
-        Key_Data[data_offset + 4] = 0xAC;
-        Key_Data[data_offset + 5] = 0x01;
-
-		// GTK KDE format - 802.11i-2004  Figure-43x
-        Key_Data[data_offset + 6] = (DefaultKeyIdx & 0x03);
-        Key_Data[data_offset + 7] = 0x00;	// Reserved Byte
-
-		data_offset += 8;
-	}
-
-
-	// Encapsulate GTK and encrypt the key-data field with KEK.
-	// Only for pairwise_msg3_WPA2 and group_msg1
-	if ((MsgType == EAPOL_PAIR_MSG_3 && bWPA2Capable) || (MsgType == EAPOL_GROUP_MSG_1))
-	{
-		// Fill in GTK
-		if (GroupKeyWepStatus == Ndis802_11Encryption3Enabled)
-		{
-			NdisMoveMemory(&Key_Data[data_offset], GTK, LEN_AES_KEY);
-			data_offset += LEN_AES_KEY;
-		}
-		else
-		{
-			NdisMoveMemory(&Key_Data[data_offset], GTK, TKIP_GTK_LENGTH);
-			data_offset += TKIP_GTK_LENGTH;
-		}
-
-		// Still dont know why, but if not append will occur "GTK not include in MSG3"
-		// Patch for compatibility between zero config and funk
-		if (MsgType == EAPOL_PAIR_MSG_3 && bWPA2Capable)
-		{
-			if (GroupKeyWepStatus == Ndis802_11Encryption3Enabled)
-			{
-				Key_Data[data_offset + 0] = 0xDD;
-				Key_Data[data_offset + 1] = 0;
-				data_offset += 2;
-			}
-			else
-			{
-				Key_Data[data_offset + 0] = 0xDD;
-				Key_Data[data_offset + 1] = 0;
-				Key_Data[data_offset + 2] = 0;
-				Key_Data[data_offset + 3] = 0;
-				Key_Data[data_offset + 4] = 0;
-				Key_Data[data_offset + 5] = 0;
-				data_offset += 6;
-			}
-		}
-
-		// Encrypt the data material in key data field
-		if (WepStatus == Ndis802_11Encryption3Enabled)
-		{
-			AES_GTK_KEY_WRAP(&PTK[16], Key_Data, data_offset, Rc4GTK);
-            // AES wrap function will grow 8 bytes in length
-            data_offset += 8;
-		}
-		else
-		{
-			// PREPARE Encrypted  "Key DATA" field.  (Encrypt GTK with RC4, usinf PTK[16]->[31] as Key, IV-field as IV)
-			// put TxTsc in Key RSC field
-			pAd->PrivateInfo.FCSCRC32 = PPPINITFCS32;   //Init crc32.
-
-			// ekey is the contanetion of IV-field, and PTK[16]->PTK[31]
-			NdisMoveMemory(ekey, pMsg->KeyDesc.KeyIv, LEN_KEY_DESC_IV);
-			NdisMoveMemory(&ekey[LEN_KEY_DESC_IV], &PTK[16], LEN_EAP_EK);
-			ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, ekey, sizeof(ekey));  //INIT SBOX, KEYLEN+3(IV)
-			pAd->PrivateInfo.FCSCRC32 = RTMP_CALC_FCS32(pAd->PrivateInfo.FCSCRC32, Key_Data, data_offset);
-			WPAARCFOUR_ENCRYPT(&pAd->PrivateInfo.WEPCONTEXT, Rc4GTK, Key_Data, data_offset);
-		}
-
-		NdisMoveMemory(pMsg->KeyDesc.KeyData, Rc4GTK, data_offset);
-	}
-	else
-	{
-		NdisMoveMemory(pMsg->KeyDesc.KeyData, Key_Data, data_offset);
-	}
-
-	// set key data length field and total length
-	pMsg->KeyDesc.KeyDataLen[1] = data_offset;
-    pMsg->Body_Len[1] += data_offset;
-
-	os_free_mem(pAd, mpool);
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Calcaulate MIC. It is used during 4-ways handsharking.
-
-	Arguments:
-		pAd				-	pointer to our pAdapter context
-    	PeerWepStatus	-	indicate the encryption type
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-VOID	CalculateMIC(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			PeerWepStatus,
-	IN	UCHAR			*PTK,
-	OUT PEAPOL_PACKET   pMsg)
-{
-    UCHAR   *OutBuffer;
-	ULONG	FrameLen = 0;
-	UCHAR	mic[LEN_KEY_DESC_MIC];
-	UCHAR	digest[80];
-
-	// allocate memory for MIC calculation
-	os_alloc_mem(pAd, (PUCHAR *)&OutBuffer, 512);
-
-    if (OutBuffer == NULL)
-    {
-		DBGPRINT(RT_DEBUG_ERROR, ("!!!CalculateMIC: no memory!!!\n"));
-		return;
-    }
-
-	// make a frame for calculating MIC.
-    MakeOutgoingFrame(OutBuffer,            	&FrameLen,
-                      pMsg->Body_Len[1] + 4,  	pMsg,
-                      END_OF_ARGS);
-
-	NdisZeroMemory(mic, sizeof(mic));
-
-	// Calculate MIC
-    if (PeerWepStatus == Ndis802_11Encryption3Enabled)
- 	{
-		HMAC_SHA1(OutBuffer,  FrameLen, PTK, LEN_EAP_MICK, digest);
-		NdisMoveMemory(mic, digest, LEN_KEY_DESC_MIC);
-	}
-	else
-	{
-		hmac_md5(PTK,  LEN_EAP_MICK, OutBuffer, FrameLen, mic);
-	}
-
-	// store the calculated MIC
-	NdisMoveMemory(pMsg->KeyDesc.KeyMic, mic, LEN_KEY_DESC_MIC);
-
-	os_free_mem(pAd, OutBuffer);
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Some received frames can't decrypt by Asic, so decrypt them by software.
-
-	Arguments:
-		pAd				-	pointer to our pAdapter context
-    	PeerWepStatus	-	indicate the encryption type
-
-	Return Value:
-		NDIS_STATUS_SUCCESS		-	decryption successful
-		NDIS_STATUS_FAILURE		-	decryption failure
-
-	========================================================================
-*/
-NDIS_STATUS	RTMPSoftDecryptBroadCastData(
-	IN	PRTMP_ADAPTER					pAd,
-	IN	RX_BLK							*pRxBlk,
-	IN  NDIS_802_11_ENCRYPTION_STATUS 	GroupCipher,
-	IN  PCIPHER_KEY						pShard_key)
-{
-	PRXWI_STRUC			pRxWI = pRxBlk->pRxWI;
-
-
-
-	// handle WEP decryption
-	if (GroupCipher == Ndis802_11Encryption1Enabled)
-    {
-		if (RTMPSoftDecryptWEP(pAd, pRxBlk->pData, pRxWI->MPDUtotalByteCount, pShard_key))
-		{
-
-			//Minus IV[4] & ICV[4]
-			pRxWI->MPDUtotalByteCount -= 8;
-		}
-		else
-		{
-			DBGPRINT(RT_DEBUG_ERROR, ("ERROR : Software decrypt WEP data fails.\n"));
-			// give up this frame
-			return NDIS_STATUS_FAILURE;
-		}
-	}
-	// handle TKIP decryption
-	else if (GroupCipher == Ndis802_11Encryption2Enabled)
-	{
-		if (RTMPSoftDecryptTKIP(pAd, pRxBlk->pData, pRxWI->MPDUtotalByteCount, 0, pShard_key))
-		{
-
-			//Minus 8 bytes MIC, 8 bytes IV/EIV, 4 bytes ICV
-			pRxWI->MPDUtotalByteCount -= 20;
-		}
-        else
-		{
-			DBGPRINT(RT_DEBUG_ERROR, ("ERROR : RTMPSoftDecryptTKIP Failed\n"));
-			// give up this frame
-			return NDIS_STATUS_FAILURE;
-        }
-	}
-	// handle AES decryption
-	else if (GroupCipher == Ndis802_11Encryption3Enabled)
-	{
-		if (RTMPSoftDecryptAES(pAd, pRxBlk->pData, pRxWI->MPDUtotalByteCount , pShard_key))
-		{
-
-			//8 bytes MIC, 8 bytes IV/EIV (CCMP Header)
-			pRxWI->MPDUtotalByteCount -= 16;
-		}
-		else
-		{
-			DBGPRINT(RT_DEBUG_ERROR, ("ERROR : RTMPSoftDecryptAES Failed\n"));
-			// give up this frame
-			return NDIS_STATUS_FAILURE;
-		}
-	}
-	else
-	{
-		// give up this frame
-		return NDIS_STATUS_FAILURE;
-	}
-
-	return NDIS_STATUS_SUCCESS;
-
-}
-
+#include "../../rt2860/common/cmm_wpa.c"
diff --git a/drivers/staging/rt2870/common/dfs.c b/drivers/staging/rt2870/common/dfs.c
index b09bba5cb20..ac2da4c0e2c 100644
--- a/drivers/staging/rt2870/common/dfs.c
+++ b/drivers/staging/rt2870/common/dfs.c
@@ -1,453 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-    ap_dfs.c
-
-    Abstract:
-    Support DFS function.
-
-    Revision History:
-    Who       When            What
-    --------  ----------      ----------------------------------------------
-    Fonchi    03-12-2007      created
-*/
-
-#include "../rt_config.h"
-
-typedef struct _RADAR_DURATION_TABLE
-{
-	ULONG RDDurRegion;
-	ULONG RadarSignalDuration;
-	ULONG Tolerance;
-} RADAR_DURATION_TABLE, *PRADAR_DURATION_TABLE;
-
-
-static UCHAR RdIdleTimeTable[MAX_RD_REGION][4] =
-{
-	{9, 250, 250, 250},		// CE
-	{4, 250, 250, 250},		// FCC
-	{4, 250, 250, 250},		// JAP
-	{15, 250, 250, 250},	// JAP_W53
-	{4, 250, 250, 250}		// JAP_W56
-};
-
-/*
-	========================================================================
-
-	Routine Description:
-		Bbp Radar detection routine
-
-	Arguments:
-		pAd 	Pointer to our adapter
-
-	Return Value:
-
-	========================================================================
-*/
-VOID BbpRadarDetectionStart(
-	IN PRTMP_ADAPTER pAd)
-{
-	UINT8 RadarPeriod;
-
-	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 114, 0x02);
-	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 121, 0x20);
-	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 122, 0x00);
-	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 123, 0x08/*0x80*/);
-	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 124, 0x28);
-	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 125, 0xff);
-
-#if 0
-	// toggle Rx enable bit for radar detection.
-	// it's Andy's recommand.
-	{
-		UINT32 Value;
-	RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-	Value |= (0x1 << 3);
-	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-	Value &= ~(0x1 << 3);
-	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-	}
-#endif
-	RadarPeriod = ((UINT)RdIdleTimeTable[pAd->CommonCfg.RadarDetect.RDDurRegion][0] + (UINT)pAd->CommonCfg.RadarDetect.DfsSessionTime) < 250 ?
-			(RdIdleTimeTable[pAd->CommonCfg.RadarDetect.RDDurRegion][0] + pAd->CommonCfg.RadarDetect.DfsSessionTime) : 250;
-
-	RTMP_IO_WRITE8(pAd, 0x7020, 0x1d);
-	RTMP_IO_WRITE8(pAd, 0x7021, 0x40);
-
-	RadarDetectionStart(pAd, 0, RadarPeriod);
-	return;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Bbp Radar detection routine
-
-	Arguments:
-		pAd 	Pointer to our adapter
-
-	Return Value:
-
-	========================================================================
-*/
-VOID BbpRadarDetectionStop(
-	IN PRTMP_ADAPTER pAd)
-{
-	RTMP_IO_WRITE8(pAd, 0x7020, 0x1d);
-	RTMP_IO_WRITE8(pAd, 0x7021, 0x60);
-
-	RadarDetectionStop(pAd);
-	return;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Radar detection routine
-
-	Arguments:
-		pAd 	Pointer to our adapter
-
-	Return Value:
-
-	========================================================================
-*/
-VOID RadarDetectionStart(
-	IN PRTMP_ADAPTER pAd,
-	IN BOOLEAN CTSProtect,
-	IN UINT8 CTSPeriod)
-{
-	UINT8 DfsActiveTime = (pAd->CommonCfg.RadarDetect.DfsSessionTime & 0x1f);
-	UINT8 CtsProtect = (CTSProtect == 1) ? 0x02 : 0x01; // CTS protect.
-
-	if (CTSProtect != 0)
-	{
-		switch(pAd->CommonCfg.RadarDetect.RDDurRegion)
-		{
-		case FCC:
-		case JAP_W56:
-			CtsProtect = 0x03;
-			break;
-
-		case CE:
-		case JAP_W53:
-		default:
-			CtsProtect = 0x02;
-			break;
-		}
-	}
-	else
-		CtsProtect = 0x01;
-
-
-	// send start-RD with CTS protection command to MCU
-	// highbyte [7]		reserve
-	// highbyte [6:5]	0x: stop Carrier/Radar detection
-	// highbyte [10]:	Start Carrier/Radar detection without CTS protection, 11: Start Carrier/Radar detection with CTS protection
-	// highbyte [4:0]	Radar/carrier detection duration. In 1ms.
-
-	// lowbyte [7:0]	Radar/carrier detection period, in 1ms.
-	AsicSendCommandToMcu(pAd, 0x60, 0xff, CTSPeriod, DfsActiveTime | (CtsProtect << 5));
-	//AsicSendCommandToMcu(pAd, 0x63, 0xff, 10, 0);
-
-	return;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Radar detection routine
-
-	Arguments:
-		pAd 	Pointer to our adapter
-
-	Return Value:
-		TRUE	Found radar signal
-		FALSE	Not found radar signal
-
-	========================================================================
-*/
-VOID RadarDetectionStop(
-	IN PRTMP_ADAPTER	pAd)
-{
-	DBGPRINT(RT_DEBUG_TRACE,("RadarDetectionStop.\n"));
-	AsicSendCommandToMcu(pAd, 0x60, 0xff, 0x00, 0x00);	// send start-RD with CTS protection command to MCU
-
-	return;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Radar channel check routine
-
-	Arguments:
-		pAd 	Pointer to our adapter
-
-	Return Value:
-		TRUE	need to do radar detect
-		FALSE	need not to do radar detect
-
-	========================================================================
-*/
-BOOLEAN RadarChannelCheck(
-	IN PRTMP_ADAPTER	pAd,
-	IN UCHAR			Ch)
-{
-#if 1
-	INT		i;
-	BOOLEAN result = FALSE;
-
-	for (i=0; i<pAd->ChannelListNum; i++)
-	{
-		if (Ch == pAd->ChannelList[i].Channel)
-		{
-			result = pAd->ChannelList[i].DfsReq;
-			break;
-		}
-	}
-
-	return result;
-#else
-	INT		i;
-	UCHAR	Channel[15]={52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140};
-
-	for (i=0; i<15; i++)
-	{
-		if (Ch == Channel[i])
-		{
-			break;
-		}
-	}
-
-	if (i != 15)
-		return TRUE;
-	else
-		return FALSE;
-#endif
-}
-
-ULONG JapRadarType(
-	IN PRTMP_ADAPTER pAd)
-{
-	ULONG		i;
-	const UCHAR	Channel[15]={52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140};
-
-	if (pAd->CommonCfg.RadarDetect.RDDurRegion != JAP)
-	{
-		return pAd->CommonCfg.RadarDetect.RDDurRegion;
-	}
-
-	for (i=0; i<15; i++)
-	{
-		if (pAd->CommonCfg.Channel == Channel[i])
-		{
-			break;
-		}
-	}
-
-	if (i < 4)
-		return JAP_W53;
-	else if (i < 15)
-		return JAP_W56;
-	else
-		return JAP; // W52
-
-}
-
-ULONG RTMPBbpReadRadarDuration(
-	IN PRTMP_ADAPTER	pAd)
-{
-	UINT8 byteValue = 0;
-	ULONG result;
-
-	BBP_IO_READ8_BY_REG_ID(pAd, BBP_R115, &byteValue);
-
-	result = 0;
-	switch (byteValue)
-	{
-	case 1: // radar signal detected by pulse mode.
-	case 2: // radar signal detected by width mode.
-		result = RTMPReadRadarDuration(pAd);
-		break;
-
-	case 0: // No radar signal.
-	default:
-
-		result = 0;
-		break;
-	}
-
-	return result;
-}
-
-ULONG RTMPReadRadarDuration(
-	IN PRTMP_ADAPTER	pAd)
-{
-	ULONG result = 0;
-
-#ifdef DFS_SUPPORT
-	UINT8 duration1 = 0, duration2 = 0, duration3 = 0;
-
-	BBP_IO_READ8_BY_REG_ID(pAd, BBP_R116, &duration1);
-	BBP_IO_READ8_BY_REG_ID(pAd, BBP_R117, &duration2);
-	BBP_IO_READ8_BY_REG_ID(pAd, BBP_R118, &duration3);
-	result = (duration1 << 16) + (duration2 << 8) + duration3;
-#endif // DFS_SUPPORT //
-
-	return result;
-
-}
-
-VOID RTMPCleanRadarDuration(
-	IN PRTMP_ADAPTER	pAd)
-{
-	return;
-}
-
-/*
-    ========================================================================
-    Routine Description:
-        Radar wave detection. The API should be invoke each second.
-
-    Arguments:
-        pAd         - Adapter pointer
-
-    Return Value:
-        None
-
-    ========================================================================
-*/
-VOID ApRadarDetectPeriodic(
-	IN PRTMP_ADAPTER pAd)
-{
-	INT	i;
-
-	pAd->CommonCfg.RadarDetect.InServiceMonitorCount++;
-
-	for (i=0; i<pAd->ChannelListNum; i++)
-	{
-		if (pAd->ChannelList[i].RemainingTimeForUse > 0)
-		{
-			pAd->ChannelList[i].RemainingTimeForUse --;
-			if ((pAd->Mlme.PeriodicRound%5) == 0)
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("RadarDetectPeriodic - ch=%d, RemainingTimeForUse=%d\n", pAd->ChannelList[i].Channel, pAd->ChannelList[i].RemainingTimeForUse));
-			}
-		}
-	}
-
-	//radar detect
-	if ((pAd->CommonCfg.Channel > 14)
-		&& (pAd->CommonCfg.bIEEE80211H == 1)
-		&& RadarChannelCheck(pAd, pAd->CommonCfg.Channel))
-	{
-		RadarDetectPeriodic(pAd);
-	}
-
-	return;
-}
-
-// Periodic Radar detection, switch channel will occur in RTMPHandleTBTTInterrupt()
-// Before switch channel, driver needs doing channel switch announcement.
-VOID RadarDetectPeriodic(
-	IN PRTMP_ADAPTER	pAd)
-{
-	// need to check channel availability, after switch channel
-	if (pAd->CommonCfg.RadarDetect.RDMode != RD_SILENCE_MODE)
-			return;
-
-	// channel availability check time is 60sec, use 65 for assurance
-	if (pAd->CommonCfg.RadarDetect.RDCount++ > pAd->CommonCfg.RadarDetect.ChMovingTime)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("Not found radar signal, start send beacon and radar detection in service monitor\n\n"));
-			BbpRadarDetectionStop(pAd);
-		AsicEnableBssSync(pAd);
-		pAd->CommonCfg.RadarDetect.RDMode = RD_NORMAL_MODE;
-
-
-		return;
-	}
-
-	return;
-}
-
-
-/*
-    ==========================================================================
-    Description:
-		change channel moving time for DFS testing.
-
-	Arguments:
-	    pAdapter                    Pointer to our adapter
-	    wrq                         Pointer to the ioctl argument
-
-    Return Value:
-        None
-
-    Note:
-        Usage:
-               1.) iwpriv ra0 set ChMovTime=[value]
-    ==========================================================================
-*/
-INT Set_ChMovingTime_Proc(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR arg)
-{
-	UINT8 Value;
-
-	Value = simple_strtol(arg, 0, 10);
-
-	pAd->CommonCfg.RadarDetect.ChMovingTime = Value;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("%s:: %d\n", __func__,
-		pAd->CommonCfg.RadarDetect.ChMovingTime));
-
-	return TRUE;
-}
-
-INT Set_LongPulseRadarTh_Proc(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR arg)
-{
-	UINT8 Value;
-
-	Value = simple_strtol(arg, 0, 10) > 10 ? 10 : simple_strtol(arg, 0, 10);
-
-	pAd->CommonCfg.RadarDetect.LongPulseRadarTh = Value;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("%s:: %d\n", __func__,
-		pAd->CommonCfg.RadarDetect.LongPulseRadarTh));
-
-	return TRUE;
-}
-
-
+#include "../../rt2860/common/dfs.c"
diff --git a/drivers/staging/rt2870/common/eeprom.c b/drivers/staging/rt2870/common/eeprom.c
index 33f16ed9c49..def09658fd8 100644
--- a/drivers/staging/rt2870/common/eeprom.c
+++ b/drivers/staging/rt2870/common/eeprom.c
@@ -1,254 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	eeprom.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Name		Date			Modification logs
-*/
-#include "../rt_config.h"
-
-#if 0
-#define EEPROM_SIZE								0x200
-#define NVRAM_OFFSET			0x30000
-#define RF_OFFSET				0x40000
-
-static UCHAR init_flag = 0;
-static PUCHAR nv_ee_start = 0;
-
-static UCHAR EeBuffer[EEPROM_SIZE];
-#endif
-// IRQL = PASSIVE_LEVEL
-VOID RaiseClock(
-    IN	PRTMP_ADAPTER	pAd,
-    IN  UINT32 *x)
-{
-    *x = *x | EESK;
-    RTMP_IO_WRITE32(pAd, E2PROM_CSR, *x);
-    RTMPusecDelay(1);				// Max frequency = 1MHz in Spec. definition
-}
-
-// IRQL = PASSIVE_LEVEL
-VOID LowerClock(
-    IN	PRTMP_ADAPTER	pAd,
-    IN  UINT32 *x)
-{
-    *x = *x & ~EESK;
-    RTMP_IO_WRITE32(pAd, E2PROM_CSR, *x);
-    RTMPusecDelay(1);
-}
-
-// IRQL = PASSIVE_LEVEL
-USHORT ShiftInBits(
-    IN	PRTMP_ADAPTER	pAd)
-{
-    UINT32		x,i;
-	USHORT      data=0;
-
-    RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
-
-    x &= ~( EEDO | EEDI);
-
-    for(i=0; i<16; i++)
-    {
-        data = data << 1;
-        RaiseClock(pAd, &x);
-
-        RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
-
-        x &= ~(EEDI);
-        if(x & EEDO)
-            data |= 1;
-
-        LowerClock(pAd, &x);
-    }
-
-    return data;
-}
-
-// IRQL = PASSIVE_LEVEL
-VOID ShiftOutBits(
-    IN	PRTMP_ADAPTER	pAd,
-    IN  USHORT data,
-    IN  USHORT count)
-{
-    UINT32       x,mask;
-
-    mask = 0x01 << (count - 1);
-    RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
-
-    x &= ~(EEDO | EEDI);
-
-    do
-    {
-        x &= ~EEDI;
-        if(data & mask)		x |= EEDI;
-
-        RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
-
-        RaiseClock(pAd, &x);
-        LowerClock(pAd, &x);
-
-        mask = mask >> 1;
-    } while(mask);
-
-    x &= ~EEDI;
-    RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
-}
-
-// IRQL = PASSIVE_LEVEL
-VOID EEpromCleanup(
-    IN	PRTMP_ADAPTER	pAd)
-{
-    UINT32 x;
-
-    RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
-
-    x &= ~(EECS | EEDI);
-    RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
-
-    RaiseClock(pAd, &x);
-    LowerClock(pAd, &x);
-}
-
-VOID EWEN(
-	IN	PRTMP_ADAPTER	pAd)
-{
-    UINT32	x;
-
-    // reset bits and set EECS
-    RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
-    x &= ~(EEDI | EEDO | EESK);
-    x |= EECS;
-    RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
-
-	// kick a pulse
-	RaiseClock(pAd, &x);
-	LowerClock(pAd, &x);
-
-    // output the read_opcode and six pulse in that order
-    ShiftOutBits(pAd, EEPROM_EWEN_OPCODE, 5);
-    ShiftOutBits(pAd, 0, 6);
-
-    EEpromCleanup(pAd);
-}
-
-VOID EWDS(
-	IN	PRTMP_ADAPTER	pAd)
-{
-    UINT32	x;
-
-    // reset bits and set EECS
-    RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
-    x &= ~(EEDI | EEDO | EESK);
-    x |= EECS;
-    RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
-
-	// kick a pulse
-	RaiseClock(pAd, &x);
-	LowerClock(pAd, &x);
-
-    // output the read_opcode and six pulse in that order
-    ShiftOutBits(pAd, EEPROM_EWDS_OPCODE, 5);
-    ShiftOutBits(pAd, 0, 6);
-
-    EEpromCleanup(pAd);
-}
-
-// IRQL = PASSIVE_LEVEL
-USHORT RTMP_EEPROM_READ16(
-    IN	PRTMP_ADAPTER	pAd,
-    IN  USHORT Offset)
-{
-    UINT32		x;
-    USHORT		data;
-
-    Offset /= 2;
-    // reset bits and set EECS
-    RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
-    x &= ~(EEDI | EEDO | EESK);
-    x |= EECS;
-    RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
-
-	// kick a pulse
-	RaiseClock(pAd, &x);
-	LowerClock(pAd, &x);
-
-    // output the read_opcode and register number in that order
-    ShiftOutBits(pAd, EEPROM_READ_OPCODE, 3);
-    ShiftOutBits(pAd, Offset, pAd->EEPROMAddressNum);
-
-    // Now read the data (16 bits) in from the selected EEPROM word
-    data = ShiftInBits(pAd);
-
-    EEpromCleanup(pAd);
-
-    return data;
-}	//ReadEEprom
-
-VOID RTMP_EEPROM_WRITE16(
-    IN	PRTMP_ADAPTER	pAd,
-    IN  USHORT Offset,
-    IN  USHORT Data)
-{
-    UINT32 x;
-
-	Offset /= 2;
-
-	EWEN(pAd);
-
-    // reset bits and set EECS
-    RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
-    x &= ~(EEDI | EEDO | EESK);
-    x |= EECS;
-    RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
-
-	// kick a pulse
-	RaiseClock(pAd, &x);
-	LowerClock(pAd, &x);
-
-    // output the read_opcode ,register number and data in that order
-    ShiftOutBits(pAd, EEPROM_WRITE_OPCODE, 3);
-    ShiftOutBits(pAd, Offset, pAd->EEPROMAddressNum);
-	ShiftOutBits(pAd, Data, 16);		// 16-bit access
-
-    // read DO status
-    RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
-
-	EEpromCleanup(pAd);
-
-	RTMPusecDelay(10000);	//delay for twp(MAX)=10ms
-
-	EWDS(pAd);
-
-    EEpromCleanup(pAd);
-}
-
+#include "../../rt2860/common/eeprom.c"
diff --git a/drivers/staging/rt2870/common/md5.c b/drivers/staging/rt2870/common/md5.c
index 774776b4b8c..195645c0e1a 100644
--- a/drivers/staging/rt2870/common/md5.c
+++ b/drivers/staging/rt2870/common/md5.c
@@ -1,1427 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-    md5.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Name		Date			Modification logs
-	jan			10-28-03		Initial
-	Rita    	11-23-04		Modify MD5 and SHA-1
-	Rita		10-14-05		Modify SHA-1 in big-endian platform
- */
-#include "../rt_config.h"
-
-/**
- * md5_mac:
- * @key: pointer to	the	key	used for MAC generation
- * @key_len: length	of the key in bytes
- * @data: pointer to the data area for which the MAC is	generated
- * @data_len: length of	the	data in	bytes
- * @mac: pointer to	the	buffer holding space for the MAC; the buffer should
- * have	space for 128-bit (16 bytes) MD5 hash value
- *
- * md5_mac() determines	the	message	authentication code	by using secure	hash
- * MD5(key | data |	key).
- */
-void md5_mac(u8 *key, size_t key_len, u8 *data, size_t data_len, u8 *mac)
-{
-	MD5_CTX	context;
-
-	MD5Init(&context);
-	MD5Update(&context,	key, key_len);
-	MD5Update(&context,	data, data_len);
-	MD5Update(&context,	key, key_len);
-	MD5Final(mac, &context);
-}
-
-/**
- * hmac_md5:
- * @key: pointer to	the	key	used for MAC generation
- * @key_len: length	of the key in bytes
- * @data: pointer to the data area for which the MAC is	generated
- * @data_len: length of	the	data in	bytes
- * @mac: pointer to	the	buffer holding space for the MAC; the buffer should
- * have	space for 128-bit (16 bytes) MD5 hash value
- *
- * hmac_md5() determines the message authentication	code using HMAC-MD5.
- * This	implementation is based	on the sample code presented in	RFC	2104.
- */
-void hmac_md5(u8 *key, size_t key_len, u8 *data, size_t data_len, u8 *mac)
-{
-	MD5_CTX	context;
-    u8 k_ipad[65]; /* inner padding - key XORd with ipad */
-    u8 k_opad[65]; /* outer padding - key XORd with opad */
-    u8 tk[16];
-	int	i;
-
-	//assert(key != NULL && data != NULL && mac != NULL);
-
-	/* if key is longer	than 64	bytes reset	it to key =	MD5(key) */
-	if (key_len	> 64) {
-		MD5_CTX	ttcontext;
-
-		MD5Init(&ttcontext);
-		MD5Update(&ttcontext, key, key_len);
-		MD5Final(tk, &ttcontext);
-		//key=(PUCHAR)ttcontext.buf;
-		key	= tk;
-		key_len	= 16;
-	}
-
-	/* the HMAC_MD5	transform looks	like:
-	 *
-	 * MD5(K XOR opad, MD5(K XOR ipad, text))
-	 *
-	 * where K is an n byte	key
-	 * ipad	is the byte	0x36 repeated 64 times
-	 * opad	is the byte	0x5c repeated 64 times
-	 * and text	is the data	being protected	*/
-
-	/* start out by	storing	key	in pads	*/
-	NdisZeroMemory(k_ipad, sizeof(k_ipad));
-	NdisZeroMemory(k_opad,	sizeof(k_opad));
-	//assert(key_len < sizeof(k_ipad));
-	NdisMoveMemory(k_ipad, key,	key_len);
-	NdisMoveMemory(k_opad, key,	key_len);
-
-	/* XOR key with	ipad and opad values */
-	for	(i = 0;	i <	64;	i++) {
-		k_ipad[i] ^= 0x36;
-		k_opad[i] ^= 0x5c;
-	}
-
-	/* perform inner MD5 */
-	MD5Init(&context);					 /*	init context for 1st pass */
-	MD5Update(&context,	k_ipad,	64);	 /*	start with inner pad */
-	MD5Update(&context,	data, data_len); /*	then text of datagram */
-	MD5Final(mac, &context);			 /*	finish up 1st pass */
-
-	/* perform outer MD5 */
-	MD5Init(&context);					 /*	init context for 2nd pass */
-	MD5Update(&context,	k_opad,	64);	 /*	start with outer pad */
-	MD5Update(&context,	mac, 16);		 /*	then results of	1st	hash */
-	MD5Final(mac, &context);			 /*	finish up 2nd pass */
-}
-
-#ifndef RT_BIG_ENDIAN
-#define byteReverse(buf, len)   /* Nothing */
-#else
-void byteReverse(unsigned char *buf, unsigned longs);
-void byteReverse(unsigned char *buf, unsigned longs)
-{
-    do {
-        *(UINT32 *)buf = SWAP32(*(UINT32 *)buf);
-        buf += 4;
-    } while (--longs);
-}
-#endif
-
-
-/* ==========================  MD5 implementation =========================== */
-// four base functions for MD5
-#define MD5_F1(x, y, z) (((x) & (y)) | ((~x) & (z)))
-#define MD5_F2(x, y, z) (((x) & (z)) | ((y) & (~z)))
-#define MD5_F3(x, y, z) ((x) ^ (y) ^ (z))
-#define MD5_F4(x, y, z) ((y) ^ ((x) | (~z)))
-#define CYCLIC_LEFT_SHIFT(w, s) (((w) << (s)) | ((w) >> (32-(s))))
-
-#define	MD5Step(f, w, x, y,	z, data, t, s)	\
-	( w	+= f(x,	y, z) +	data + t,  w = (CYCLIC_LEFT_SHIFT(w, s)) & 0xffffffff, w +=	x )
-
-
-/*
- *  Function Description:
- *      Initiate MD5 Context satisfied in RFC 1321
- *
- *  Arguments:
- *      pCtx        Pointer	to MD5 context
- *
- *  Return Value:
- *      None
- */
-VOID MD5Init(MD5_CTX *pCtx)
-{
-    pCtx->Buf[0]=0x67452301;
-    pCtx->Buf[1]=0xefcdab89;
-    pCtx->Buf[2]=0x98badcfe;
-    pCtx->Buf[3]=0x10325476;
-
-    pCtx->LenInBitCount[0]=0;
-    pCtx->LenInBitCount[1]=0;
-}
-
-
-/*
- *  Function Description:
- *      Update MD5 Context, allow of an arrary of octets as the next portion
- *      of the message
- *
- *  Arguments:
- *      pCtx		Pointer	to MD5 context
- * 	    pData       Pointer to input data
- *      LenInBytes  The length of input data (unit: byte)
- *
- *  Return Value:
- *      None
- *
- *  Note:
- *      Called after MD5Init or MD5Update(itself)
- */
-VOID MD5Update(MD5_CTX *pCtx, UCHAR *pData, UINT32 LenInBytes)
-{
-
-    UINT32 TfTimes;
-    UINT32 temp;
-	unsigned int i;
-
-    temp = pCtx->LenInBitCount[0];
-
-    pCtx->LenInBitCount[0] = (UINT32) (pCtx->LenInBitCount[0] + (LenInBytes << 3));
-
-    if (pCtx->LenInBitCount[0] < temp)
-        pCtx->LenInBitCount[1]++;   //carry in
-
-    pCtx->LenInBitCount[1] += LenInBytes >> 29;
-
-    // mod 64 bytes
-    temp = (temp >> 3) & 0x3f;
-
-    // process lacks of 64-byte data
-    if (temp)
-    {
-        UCHAR *pAds = (UCHAR *) pCtx->Input + temp;
-
-        if ((temp+LenInBytes) < 64)
-        {
-            NdisMoveMemory(pAds, (UCHAR *)pData, LenInBytes);
-            return;
-        }
-
-        NdisMoveMemory(pAds, (UCHAR *)pData, 64-temp);
-        byteReverse(pCtx->Input, 16);
-        MD5Transform(pCtx->Buf, (UINT32 *)pCtx->Input);
-
-        pData += 64-temp;
-        LenInBytes -= 64-temp;
-    } // end of if (temp)
-
-
-    TfTimes = (LenInBytes >> 6);
-
-    for (i=TfTimes; i>0; i--)
-    {
-        NdisMoveMemory(pCtx->Input, (UCHAR *)pData, 64);
-        byteReverse(pCtx->Input, 16);
-        MD5Transform(pCtx->Buf, (UINT32 *)pCtx->Input);
-        pData += 64;
-        LenInBytes -= 64;
-    } // end of for
-
-    // buffering lacks of 64-byte data
-    if(LenInBytes)
-        NdisMoveMemory(pCtx->Input, (UCHAR *)pData, LenInBytes);
-
-}
-
-
-/*
- *  Function Description:
- *      Append padding bits and length of original message in the tail
- *      The message digest has to be completed in the end
- *
- *  Arguments:
- *      Digest		Output of Digest-Message for MD5
- *  	pCtx        Pointer	to MD5 context
- *
- *  Return Value:
- *      None
- *
- *  Note:
- *      Called after MD5Update
- */
-VOID MD5Final(UCHAR Digest[16], MD5_CTX *pCtx)
-{
-    UCHAR Remainder;
-    UCHAR PadLenInBytes;
-    UCHAR *pAppend=0;
-    unsigned int i;
-
-    Remainder = (UCHAR)((pCtx->LenInBitCount[0] >> 3) & 0x3f);
-
-    PadLenInBytes = (Remainder < 56) ? (56-Remainder) : (120-Remainder);
-
-    pAppend = (UCHAR *)pCtx->Input + Remainder;
-
-    // padding bits without crossing block(64-byte based) boundary
-    if (Remainder < 56)
-    {
-        *pAppend = 0x80;
-        PadLenInBytes --;
-
-        NdisZeroMemory((UCHAR *)pCtx->Input + Remainder+1, PadLenInBytes);
-
-		// add data-length field, from low to high
-       	for (i=0; i<4; i++)
-        {
-        	pCtx->Input[56+i] = (UCHAR)((pCtx->LenInBitCount[0] >> (i << 3)) & 0xff);
-        	pCtx->Input[60+i] = (UCHAR)((pCtx->LenInBitCount[1] >> (i << 3)) & 0xff);
-      	}
-
-        byteReverse(pCtx->Input, 16);
-        MD5Transform(pCtx->Buf, (UINT32 *)pCtx->Input);
-    } // end of if
-
-    // padding bits with crossing block(64-byte based) boundary
-    else
-    {
-        // the first block ===
-        *pAppend = 0x80;
-        PadLenInBytes --;
-
-        NdisZeroMemory((UCHAR *)pCtx->Input + Remainder+1, (64-Remainder-1));
-        PadLenInBytes -= (64 - Remainder - 1);
-
-        byteReverse(pCtx->Input, 16);
-        MD5Transform(pCtx->Buf, (UINT32 *)pCtx->Input);
-
-
-        // the second block ===
-        NdisZeroMemory((UCHAR *)pCtx->Input, PadLenInBytes);
-
-        // add data-length field
-        for (i=0; i<4; i++)
-        {
-        	pCtx->Input[56+i] = (UCHAR)((pCtx->LenInBitCount[0] >> (i << 3)) & 0xff);
-        	pCtx->Input[60+i] = (UCHAR)((pCtx->LenInBitCount[1] >> (i << 3)) & 0xff);
-      	}
-
-        byteReverse(pCtx->Input, 16);
-        MD5Transform(pCtx->Buf, (UINT32 *)pCtx->Input);
-    } // end of else
-
-
-    NdisMoveMemory((UCHAR *)Digest, (UINT32 *)pCtx->Buf, 16); // output
-    byteReverse((UCHAR *)Digest, 4);
-    NdisZeroMemory(pCtx, sizeof(pCtx)); // memory free
-}
-
-
-/*
- *  Function Description:
- *      The central algorithm of MD5, consists of four rounds and sixteen
- *  	steps per round
- *
- *  Arguments:
- *      Buf     Buffers of four states (output: 16 bytes)
- * 	    Mes     Input data (input: 64 bytes)
- *
- *  Return Value:
- *      None
- *
- *  Note:
- *      Called by MD5Update or MD5Final
- */
-VOID MD5Transform(UINT32 Buf[4], UINT32 Mes[16])
-{
-    UINT32 Reg[4], Temp;
-	unsigned int i;
-
-    static UCHAR LShiftVal[16] =
-    {
-        7, 12, 17, 22,
-		5, 9 , 14, 20,
-		4, 11, 16, 23,
- 		6, 10, 15, 21,
- 	};
-
-
-	// [equal to 4294967296*abs(sin(index))]
-    static UINT32 MD5Table[64] =
-	{
-		0xd76aa478,	0xe8c7b756,	0x242070db,	0xc1bdceee,
-		0xf57c0faf,	0x4787c62a,	0xa8304613, 0xfd469501,
-		0x698098d8,	0x8b44f7af,	0xffff5bb1,	0x895cd7be,
-    	0x6b901122,	0xfd987193,	0xa679438e,	0x49b40821,
-
-    	0xf61e2562,	0xc040b340,	0x265e5a51,	0xe9b6c7aa,
-    	0xd62f105d,	0x02441453,	0xd8a1e681,	0xe7d3fbc8,
-    	0x21e1cde6,	0xc33707d6,	0xf4d50d87,	0x455a14ed,
-    	0xa9e3e905,	0xfcefa3f8,	0x676f02d9,	0x8d2a4c8a,
-
-    	0xfffa3942,	0x8771f681,	0x6d9d6122,	0xfde5380c,
-    	0xa4beea44,	0x4bdecfa9,	0xf6bb4b60,	0xbebfbc70,
-    	0x289b7ec6,	0xeaa127fa,	0xd4ef3085,	0x04881d05,
-    	0xd9d4d039,	0xe6db99e5,	0x1fa27cf8,	0xc4ac5665,
-
-    	0xf4292244,	0x432aff97,	0xab9423a7,	0xfc93a039,
-   		0x655b59c3,	0x8f0ccc92,	0xffeff47d,	0x85845dd1,
-    	0x6fa87e4f,	0xfe2ce6e0,	0xa3014314,	0x4e0811a1,
-    	0xf7537e82,	0xbd3af235,	0x2ad7d2bb,	0xeb86d391
-	};
-
-
-    for (i=0; i<4; i++)
-        Reg[i]=Buf[i];
-
-
-    // 64 steps in MD5 algorithm
-    for (i=0; i<16; i++)
-    {
-        MD5Step(MD5_F1, Reg[0], Reg[1], Reg[2], Reg[3], Mes[i],
-                MD5Table[i], LShiftVal[i & 0x3]);
-
-        // one-word right shift
-        Temp   = Reg[3];
-        Reg[3] = Reg[2];
-        Reg[2] = Reg[1];
-        Reg[1] = Reg[0];
-        Reg[0] = Temp;
-    }
-    for (i=16; i<32; i++)
-    {
-        MD5Step(MD5_F2, Reg[0], Reg[1], Reg[2], Reg[3], Mes[(5*(i & 0xf)+1) & 0xf],
-                MD5Table[i], LShiftVal[(0x1 << 2)+(i & 0x3)]);
-
-        // one-word right shift
-        Temp   = Reg[3];
-        Reg[3] = Reg[2];
-        Reg[2] = Reg[1];
-        Reg[1] = Reg[0];
-        Reg[0] = Temp;
-    }
-    for (i=32; i<48; i++)
-    {
-        MD5Step(MD5_F3, Reg[0], Reg[1], Reg[2], Reg[3], Mes[(3*(i & 0xf)+5) & 0xf],
-                MD5Table[i], LShiftVal[(0x1 << 3)+(i & 0x3)]);
-
-        // one-word right shift
-        Temp   = Reg[3];
-        Reg[3] = Reg[2];
-        Reg[2] = Reg[1];
-        Reg[1] = Reg[0];
-        Reg[0] = Temp;
-    }
-    for (i=48; i<64; i++)
-    {
-        MD5Step(MD5_F4, Reg[0], Reg[1], Reg[2], Reg[3], Mes[(7*(i & 0xf)) & 0xf],
-                MD5Table[i], LShiftVal[(0x3 << 2)+(i & 0x3)]);
-
-        // one-word right shift
-        Temp   = Reg[3];
-        Reg[3] = Reg[2];
-        Reg[2] = Reg[1];
-        Reg[1] = Reg[0];
-        Reg[0] = Temp;
-    }
-
-
-    // (temporary)output
-    for (i=0; i<4; i++)
-        Buf[i] += Reg[i];
-
-}
-
-
-
-/* =========================  SHA-1 implementation ========================== */
-// four base functions for SHA-1
-#define SHA1_F1(b, c, d)    (((b) & (c)) | ((~b) & (d)))
-#define SHA1_F2(b, c, d)    ((b) ^ (c) ^ (d))
-#define SHA1_F3(b, c, d)    (((b) & (c)) | ((b) & (d)) | ((c) & (d)))
-
-
-#define SHA1Step(f, a, b, c, d, e, w, k)    \
-    ( e	+= ( f(b, c, d) + w + k + CYCLIC_LEFT_SHIFT(a, 5)) & 0xffffffff, \
-      b = CYCLIC_LEFT_SHIFT(b, 30) )
-
-//Initiate SHA-1 Context satisfied in RFC 3174
-VOID SHAInit(SHA_CTX *pCtx)
-{
-    pCtx->Buf[0]=0x67452301;
-    pCtx->Buf[1]=0xefcdab89;
-    pCtx->Buf[2]=0x98badcfe;
-    pCtx->Buf[3]=0x10325476;
-    pCtx->Buf[4]=0xc3d2e1f0;
-
-    pCtx->LenInBitCount[0]=0;
-    pCtx->LenInBitCount[1]=0;
-}
-
-/*
- *  Function Description:
- *      Update SHA-1 Context, allow of an arrary of octets as the next
- *      portion of the message
- *
- *  Arguments:
- *      pCtx		Pointer	to SHA-1 context
- * 	    pData       Pointer to input data
- *      LenInBytes  The length of input data (unit: byte)
- *
- *  Return Value:
- *      error       indicate more than pow(2,64) bits of data
- *
- *  Note:
- *      Called after SHAInit or SHAUpdate(itself)
- */
-UCHAR SHAUpdate(SHA_CTX *pCtx, UCHAR *pData, UINT32 LenInBytes)
-{
-    UINT32 TfTimes;
-    UINT32 temp1,temp2;
-	unsigned int i;
-	UCHAR err=1;
-
-    temp1 = pCtx->LenInBitCount[0];
-    temp2 = pCtx->LenInBitCount[1];
-
-    pCtx->LenInBitCount[0] = (UINT32) (pCtx->LenInBitCount[0] + (LenInBytes << 3));
-    if (pCtx->LenInBitCount[0] < temp1)
-        pCtx->LenInBitCount[1]++;   //carry in
-
-
-    pCtx->LenInBitCount[1] = (UINT32) (pCtx->LenInBitCount[1] +(LenInBytes >> 29));
-    if (pCtx->LenInBitCount[1] < temp2)
-        return (err);   //check total length of original data
-
-
-    // mod 64 bytes
-    temp1 = (temp1 >> 3) & 0x3f;
-
-    // process lacks of 64-byte data
-    if (temp1)
-    {
-        UCHAR *pAds = (UCHAR *) pCtx->Input + temp1;
-
-        if ((temp1+LenInBytes) < 64)
-        {
-            NdisMoveMemory(pAds, (UCHAR *)pData, LenInBytes);
-            return (0);
-        }
-
-        NdisMoveMemory(pAds, (UCHAR *)pData, 64-temp1);
-        byteReverse((UCHAR *)pCtx->Input, 16);
-
-        NdisZeroMemory((UCHAR *)pCtx->Input + 64, 16);
-        SHATransform(pCtx->Buf, (UINT32 *)pCtx->Input);
-
-        pData += 64-temp1;
-        LenInBytes -= 64-temp1;
-    } // end of if (temp1)
-
-
-    TfTimes = (LenInBytes >> 6);
-
-    for (i=TfTimes; i>0; i--)
-    {
-        NdisMoveMemory(pCtx->Input, (UCHAR *)pData, 64);
-        byteReverse((UCHAR *)pCtx->Input, 16);
-
-        NdisZeroMemory((UCHAR *)pCtx->Input + 64, 16);
-        SHATransform(pCtx->Buf, (UINT32 *)pCtx->Input);
-        pData += 64;
-        LenInBytes -= 64;
-    } // end of for
-
-    // buffering lacks of 64-byte data
-    if(LenInBytes)
-        NdisMoveMemory(pCtx->Input, (UCHAR *)pData, LenInBytes);
-
-	return (0);
-
-}
-
-// Append padding bits and length of original message in the tail
-// The message digest has to be completed in the end
-VOID SHAFinal(SHA_CTX *pCtx, UCHAR Digest[20])
-{
-    UCHAR Remainder;
-    UCHAR PadLenInBytes;
-    UCHAR *pAppend=0;
-    unsigned int i;
-
-    Remainder = (UCHAR)((pCtx->LenInBitCount[0] >> 3) & 0x3f);
-
-    pAppend = (UCHAR *)pCtx->Input + Remainder;
-
-    PadLenInBytes = (Remainder < 56) ? (56-Remainder) : (120-Remainder);
-
-    // padding bits without crossing block(64-byte based) boundary
-    if (Remainder < 56)
-    {
-        *pAppend = 0x80;
-        PadLenInBytes --;
-
-        NdisZeroMemory((UCHAR *)pCtx->Input + Remainder+1, PadLenInBytes);
-
-		// add data-length field, from high to low
-        for (i=0; i<4; i++)
-        {
-        	pCtx->Input[56+i] = (UCHAR)((pCtx->LenInBitCount[1] >> ((3-i) << 3)) & 0xff);
-        	pCtx->Input[60+i] = (UCHAR)((pCtx->LenInBitCount[0] >> ((3-i) << 3)) & 0xff);
-      	}
-
-        byteReverse((UCHAR *)pCtx->Input, 16);
-        NdisZeroMemory((UCHAR *)pCtx->Input + 64, 14);
-        SHATransform(pCtx->Buf, (UINT32 *)pCtx->Input);
-    } // end of if
-
-    // padding bits with crossing block(64-byte based) boundary
-    else
-    {
-        // the first block ===
-        *pAppend = 0x80;
-        PadLenInBytes --;
-
-        NdisZeroMemory((UCHAR *)pCtx->Input + Remainder+1, (64-Remainder-1));
-        PadLenInBytes -= (64 - Remainder - 1);
-
-        byteReverse((UCHAR *)pCtx->Input, 16);
-        NdisZeroMemory((UCHAR *)pCtx->Input + 64, 16);
-        SHATransform(pCtx->Buf, (UINT32 *)pCtx->Input);
-
-
-        // the second block ===
-        NdisZeroMemory((UCHAR *)pCtx->Input, PadLenInBytes);
-
-		// add data-length field
-		for (i=0; i<4; i++)
-        {
-        	pCtx->Input[56+i] = (UCHAR)((pCtx->LenInBitCount[1] >> ((3-i) << 3)) & 0xff);
-        	pCtx->Input[60+i] = (UCHAR)((pCtx->LenInBitCount[0] >> ((3-i) << 3)) & 0xff);
-      	}
-
-        byteReverse((UCHAR *)pCtx->Input, 16);
-        NdisZeroMemory((UCHAR *)pCtx->Input + 64, 16);
-        SHATransform(pCtx->Buf, (UINT32 *)pCtx->Input);
-    } // end of else
-
-
-    //Output, bytereverse
-    for (i=0; i<20; i++)
-    {
-        Digest [i] = (UCHAR)(pCtx->Buf[i>>2] >> 8*(3-(i & 0x3)));
-    }
-
-    NdisZeroMemory(pCtx, sizeof(pCtx)); // memory free
-}
-
-
-// The central algorithm of SHA-1, consists of four rounds and
-// twenty steps per round
-VOID SHATransform(UINT32 Buf[5], UINT32 Mes[20])
-{
-    UINT32 Reg[5],Temp;
-	unsigned int i;
-    UINT32 W[80];
-
-    static UINT32 SHA1Table[4] = { 0x5a827999, 0x6ed9eba1,
-                                  0x8f1bbcdc, 0xca62c1d6 };
-
-    Reg[0]=Buf[0];
-	Reg[1]=Buf[1];
-	Reg[2]=Buf[2];
-	Reg[3]=Buf[3];
-	Reg[4]=Buf[4];
-
-    //the first octet of a word is stored in the 0th element, bytereverse
-	for(i = 0; i < 16; i++)
-    {
-    	W[i]  = (Mes[i] >> 24) & 0xff;
-        W[i] |= (Mes[i] >> 8 ) & 0xff00;
-        W[i] |= (Mes[i] << 8 ) & 0xff0000;
-        W[i] |= (Mes[i] << 24) & 0xff000000;
-    }
-
-
-    for	(i = 0; i < 64; i++)
-	    W[16+i] = CYCLIC_LEFT_SHIFT(W[i] ^ W[2+i] ^ W[8+i] ^ W[13+i], 1);
-
-
-    // 80 steps in SHA-1 algorithm
-    for (i=0; i<80; i++)
-    {
-        if (i<20)
-            SHA1Step(SHA1_F1, Reg[0], Reg[1], Reg[2], Reg[3], Reg[4],
-                     W[i], SHA1Table[0]);
-
-        else if (i>=20 && i<40)
-            SHA1Step(SHA1_F2, Reg[0], Reg[1], Reg[2], Reg[3], Reg[4],
-                     W[i], SHA1Table[1]);
-
-		else if (i>=40 && i<60)
-            SHA1Step(SHA1_F3, Reg[0], Reg[1], Reg[2], Reg[3], Reg[4],
-                      W[i], SHA1Table[2]);
-
-        else
-            SHA1Step(SHA1_F2, Reg[0], Reg[1], Reg[2], Reg[3], Reg[4],
-                     W[i], SHA1Table[3]);
-
-
-       // one-word right shift
-		Temp   = Reg[4];
-        Reg[4] = Reg[3];
-        Reg[3] = Reg[2];
-        Reg[2] = Reg[1];
-        Reg[1] = Reg[0];
-        Reg[0] = Temp;
-
-    } // end of for-loop
-
-
-    // (temporary)output
-    for (i=0; i<5; i++)
-        Buf[i] += Reg[i];
-
-}
-
-
-/* =========================  AES En/Decryption ========================== */
-
-/* forward S-box */
-static uint32 FSb[256] =
-{
-	0x63, 0x7C,	0x77, 0x7B,	0xF2, 0x6B,	0x6F, 0xC5,
-	0x30, 0x01,	0x67, 0x2B,	0xFE, 0xD7,	0xAB, 0x76,
-	0xCA, 0x82,	0xC9, 0x7D,	0xFA, 0x59,	0x47, 0xF0,
-	0xAD, 0xD4,	0xA2, 0xAF,	0x9C, 0xA4,	0x72, 0xC0,
-	0xB7, 0xFD,	0x93, 0x26,	0x36, 0x3F,	0xF7, 0xCC,
-	0x34, 0xA5,	0xE5, 0xF1,	0x71, 0xD8,	0x31, 0x15,
-	0x04, 0xC7,	0x23, 0xC3,	0x18, 0x96,	0x05, 0x9A,
-	0x07, 0x12,	0x80, 0xE2,	0xEB, 0x27,	0xB2, 0x75,
-	0x09, 0x83,	0x2C, 0x1A,	0x1B, 0x6E,	0x5A, 0xA0,
-	0x52, 0x3B,	0xD6, 0xB3,	0x29, 0xE3,	0x2F, 0x84,
-	0x53, 0xD1,	0x00, 0xED,	0x20, 0xFC,	0xB1, 0x5B,
-	0x6A, 0xCB,	0xBE, 0x39,	0x4A, 0x4C,	0x58, 0xCF,
-	0xD0, 0xEF,	0xAA, 0xFB,	0x43, 0x4D,	0x33, 0x85,
-	0x45, 0xF9,	0x02, 0x7F,	0x50, 0x3C,	0x9F, 0xA8,
-	0x51, 0xA3,	0x40, 0x8F,	0x92, 0x9D,	0x38, 0xF5,
-	0xBC, 0xB6,	0xDA, 0x21,	0x10, 0xFF,	0xF3, 0xD2,
-	0xCD, 0x0C,	0x13, 0xEC,	0x5F, 0x97,	0x44, 0x17,
-	0xC4, 0xA7,	0x7E, 0x3D,	0x64, 0x5D,	0x19, 0x73,
-	0x60, 0x81,	0x4F, 0xDC,	0x22, 0x2A,	0x90, 0x88,
-	0x46, 0xEE,	0xB8, 0x14,	0xDE, 0x5E,	0x0B, 0xDB,
-	0xE0, 0x32,	0x3A, 0x0A,	0x49, 0x06,	0x24, 0x5C,
-	0xC2, 0xD3,	0xAC, 0x62,	0x91, 0x95,	0xE4, 0x79,
-	0xE7, 0xC8,	0x37, 0x6D,	0x8D, 0xD5,	0x4E, 0xA9,
-	0x6C, 0x56,	0xF4, 0xEA,	0x65, 0x7A,	0xAE, 0x08,
-	0xBA, 0x78,	0x25, 0x2E,	0x1C, 0xA6,	0xB4, 0xC6,
-	0xE8, 0xDD,	0x74, 0x1F,	0x4B, 0xBD,	0x8B, 0x8A,
-	0x70, 0x3E,	0xB5, 0x66,	0x48, 0x03,	0xF6, 0x0E,
-	0x61, 0x35,	0x57, 0xB9,	0x86, 0xC1,	0x1D, 0x9E,
-	0xE1, 0xF8,	0x98, 0x11,	0x69, 0xD9,	0x8E, 0x94,
-	0x9B, 0x1E,	0x87, 0xE9,	0xCE, 0x55,	0x28, 0xDF,
-	0x8C, 0xA1,	0x89, 0x0D,	0xBF, 0xE6,	0x42, 0x68,
-	0x41, 0x99,	0x2D, 0x0F,	0xB0, 0x54,	0xBB, 0x16
-};
-
-/* forward table */
-#define	FT \
-\
-	V(C6,63,63,A5),	V(F8,7C,7C,84),	V(EE,77,77,99),	V(F6,7B,7B,8D),	\
-	V(FF,F2,F2,0D),	V(D6,6B,6B,BD),	V(DE,6F,6F,B1),	V(91,C5,C5,54),	\
-	V(60,30,30,50),	V(02,01,01,03),	V(CE,67,67,A9),	V(56,2B,2B,7D),	\
-	V(E7,FE,FE,19),	V(B5,D7,D7,62),	V(4D,AB,AB,E6),	V(EC,76,76,9A),	\
-	V(8F,CA,CA,45),	V(1F,82,82,9D),	V(89,C9,C9,40),	V(FA,7D,7D,87),	\
-	V(EF,FA,FA,15),	V(B2,59,59,EB),	V(8E,47,47,C9),	V(FB,F0,F0,0B),	\
-	V(41,AD,AD,EC),	V(B3,D4,D4,67),	V(5F,A2,A2,FD),	V(45,AF,AF,EA),	\
-	V(23,9C,9C,BF),	V(53,A4,A4,F7),	V(E4,72,72,96),	V(9B,C0,C0,5B),	\
-	V(75,B7,B7,C2),	V(E1,FD,FD,1C),	V(3D,93,93,AE),	V(4C,26,26,6A),	\
-	V(6C,36,36,5A),	V(7E,3F,3F,41),	V(F5,F7,F7,02),	V(83,CC,CC,4F),	\
-	V(68,34,34,5C),	V(51,A5,A5,F4),	V(D1,E5,E5,34),	V(F9,F1,F1,08),	\
-	V(E2,71,71,93),	V(AB,D8,D8,73),	V(62,31,31,53),	V(2A,15,15,3F),	\
-	V(08,04,04,0C),	V(95,C7,C7,52),	V(46,23,23,65),	V(9D,C3,C3,5E),	\
-	V(30,18,18,28),	V(37,96,96,A1),	V(0A,05,05,0F),	V(2F,9A,9A,B5),	\
-	V(0E,07,07,09),	V(24,12,12,36),	V(1B,80,80,9B),	V(DF,E2,E2,3D),	\
-	V(CD,EB,EB,26),	V(4E,27,27,69),	V(7F,B2,B2,CD),	V(EA,75,75,9F),	\
-	V(12,09,09,1B),	V(1D,83,83,9E),	V(58,2C,2C,74),	V(34,1A,1A,2E),	\
-	V(36,1B,1B,2D),	V(DC,6E,6E,B2),	V(B4,5A,5A,EE),	V(5B,A0,A0,FB),	\
-	V(A4,52,52,F6),	V(76,3B,3B,4D),	V(B7,D6,D6,61),	V(7D,B3,B3,CE),	\
-	V(52,29,29,7B),	V(DD,E3,E3,3E),	V(5E,2F,2F,71),	V(13,84,84,97),	\
-	V(A6,53,53,F5),	V(B9,D1,D1,68),	V(00,00,00,00),	V(C1,ED,ED,2C),	\
-	V(40,20,20,60),	V(E3,FC,FC,1F),	V(79,B1,B1,C8),	V(B6,5B,5B,ED),	\
-	V(D4,6A,6A,BE),	V(8D,CB,CB,46),	V(67,BE,BE,D9),	V(72,39,39,4B),	\
-	V(94,4A,4A,DE),	V(98,4C,4C,D4),	V(B0,58,58,E8),	V(85,CF,CF,4A),	\
-	V(BB,D0,D0,6B),	V(C5,EF,EF,2A),	V(4F,AA,AA,E5),	V(ED,FB,FB,16),	\
-	V(86,43,43,C5),	V(9A,4D,4D,D7),	V(66,33,33,55),	V(11,85,85,94),	\
-	V(8A,45,45,CF),	V(E9,F9,F9,10),	V(04,02,02,06),	V(FE,7F,7F,81),	\
-	V(A0,50,50,F0),	V(78,3C,3C,44),	V(25,9F,9F,BA),	V(4B,A8,A8,E3),	\
-	V(A2,51,51,F3),	V(5D,A3,A3,FE),	V(80,40,40,C0),	V(05,8F,8F,8A),	\
-	V(3F,92,92,AD),	V(21,9D,9D,BC),	V(70,38,38,48),	V(F1,F5,F5,04),	\
-	V(63,BC,BC,DF),	V(77,B6,B6,C1),	V(AF,DA,DA,75),	V(42,21,21,63),	\
-	V(20,10,10,30),	V(E5,FF,FF,1A),	V(FD,F3,F3,0E),	V(BF,D2,D2,6D),	\
-	V(81,CD,CD,4C),	V(18,0C,0C,14),	V(26,13,13,35),	V(C3,EC,EC,2F),	\
-	V(BE,5F,5F,E1),	V(35,97,97,A2),	V(88,44,44,CC),	V(2E,17,17,39),	\
-	V(93,C4,C4,57),	V(55,A7,A7,F2),	V(FC,7E,7E,82),	V(7A,3D,3D,47),	\
-	V(C8,64,64,AC),	V(BA,5D,5D,E7),	V(32,19,19,2B),	V(E6,73,73,95),	\
-	V(C0,60,60,A0),	V(19,81,81,98),	V(9E,4F,4F,D1),	V(A3,DC,DC,7F),	\
-	V(44,22,22,66),	V(54,2A,2A,7E),	V(3B,90,90,AB),	V(0B,88,88,83),	\
-	V(8C,46,46,CA),	V(C7,EE,EE,29),	V(6B,B8,B8,D3),	V(28,14,14,3C),	\
-	V(A7,DE,DE,79),	V(BC,5E,5E,E2),	V(16,0B,0B,1D),	V(AD,DB,DB,76),	\
-	V(DB,E0,E0,3B),	V(64,32,32,56),	V(74,3A,3A,4E),	V(14,0A,0A,1E),	\
-	V(92,49,49,DB),	V(0C,06,06,0A),	V(48,24,24,6C),	V(B8,5C,5C,E4),	\
-	V(9F,C2,C2,5D),	V(BD,D3,D3,6E),	V(43,AC,AC,EF),	V(C4,62,62,A6),	\
-	V(39,91,91,A8),	V(31,95,95,A4),	V(D3,E4,E4,37),	V(F2,79,79,8B),	\
-	V(D5,E7,E7,32),	V(8B,C8,C8,43),	V(6E,37,37,59),	V(DA,6D,6D,B7),	\
-	V(01,8D,8D,8C),	V(B1,D5,D5,64),	V(9C,4E,4E,D2),	V(49,A9,A9,E0),	\
-	V(D8,6C,6C,B4),	V(AC,56,56,FA),	V(F3,F4,F4,07),	V(CF,EA,EA,25),	\
-	V(CA,65,65,AF),	V(F4,7A,7A,8E),	V(47,AE,AE,E9),	V(10,08,08,18),	\
-	V(6F,BA,BA,D5),	V(F0,78,78,88),	V(4A,25,25,6F),	V(5C,2E,2E,72),	\
-	V(38,1C,1C,24),	V(57,A6,A6,F1),	V(73,B4,B4,C7),	V(97,C6,C6,51),	\
-	V(CB,E8,E8,23),	V(A1,DD,DD,7C),	V(E8,74,74,9C),	V(3E,1F,1F,21),	\
-	V(96,4B,4B,DD),	V(61,BD,BD,DC),	V(0D,8B,8B,86),	V(0F,8A,8A,85),	\
-	V(E0,70,70,90),	V(7C,3E,3E,42),	V(71,B5,B5,C4),	V(CC,66,66,AA),	\
-	V(90,48,48,D8),	V(06,03,03,05),	V(F7,F6,F6,01),	V(1C,0E,0E,12),	\
-	V(C2,61,61,A3),	V(6A,35,35,5F),	V(AE,57,57,F9),	V(69,B9,B9,D0),	\
-	V(17,86,86,91),	V(99,C1,C1,58),	V(3A,1D,1D,27),	V(27,9E,9E,B9),	\
-	V(D9,E1,E1,38),	V(EB,F8,F8,13),	V(2B,98,98,B3),	V(22,11,11,33),	\
-	V(D2,69,69,BB),	V(A9,D9,D9,70),	V(07,8E,8E,89),	V(33,94,94,A7),	\
-	V(2D,9B,9B,B6),	V(3C,1E,1E,22),	V(15,87,87,92),	V(C9,E9,E9,20),	\
-	V(87,CE,CE,49),	V(AA,55,55,FF),	V(50,28,28,78),	V(A5,DF,DF,7A),	\
-	V(03,8C,8C,8F),	V(59,A1,A1,F8),	V(09,89,89,80),	V(1A,0D,0D,17),	\
-	V(65,BF,BF,DA),	V(D7,E6,E6,31),	V(84,42,42,C6),	V(D0,68,68,B8),	\
-	V(82,41,41,C3),	V(29,99,99,B0),	V(5A,2D,2D,77),	V(1E,0F,0F,11),	\
-	V(7B,B0,B0,CB),	V(A8,54,54,FC),	V(6D,BB,BB,D6),	V(2C,16,16,3A)
-
-#define	V(a,b,c,d) 0x##a##b##c##d
-static uint32 FT0[256] = { FT };
-#undef V
-
-#define	V(a,b,c,d) 0x##d##a##b##c
-static uint32 FT1[256] = { FT };
-#undef V
-
-#define	V(a,b,c,d) 0x##c##d##a##b
-static uint32 FT2[256] = { FT };
-#undef V
-
-#define	V(a,b,c,d) 0x##b##c##d##a
-static uint32 FT3[256] = { FT };
-#undef V
-
-#undef FT
-
-/* reverse S-box */
-
-static uint32 RSb[256] =
-{
-	0x52, 0x09,	0x6A, 0xD5,	0x30, 0x36,	0xA5, 0x38,
-	0xBF, 0x40,	0xA3, 0x9E,	0x81, 0xF3,	0xD7, 0xFB,
-	0x7C, 0xE3,	0x39, 0x82,	0x9B, 0x2F,	0xFF, 0x87,
-	0x34, 0x8E,	0x43, 0x44,	0xC4, 0xDE,	0xE9, 0xCB,
-	0x54, 0x7B,	0x94, 0x32,	0xA6, 0xC2,	0x23, 0x3D,
-	0xEE, 0x4C,	0x95, 0x0B,	0x42, 0xFA,	0xC3, 0x4E,
-	0x08, 0x2E,	0xA1, 0x66,	0x28, 0xD9,	0x24, 0xB2,
-	0x76, 0x5B,	0xA2, 0x49,	0x6D, 0x8B,	0xD1, 0x25,
-	0x72, 0xF8,	0xF6, 0x64,	0x86, 0x68,	0x98, 0x16,
-	0xD4, 0xA4,	0x5C, 0xCC,	0x5D, 0x65,	0xB6, 0x92,
-	0x6C, 0x70,	0x48, 0x50,	0xFD, 0xED,	0xB9, 0xDA,
-	0x5E, 0x15,	0x46, 0x57,	0xA7, 0x8D,	0x9D, 0x84,
-	0x90, 0xD8,	0xAB, 0x00,	0x8C, 0xBC,	0xD3, 0x0A,
-	0xF7, 0xE4,	0x58, 0x05,	0xB8, 0xB3,	0x45, 0x06,
-	0xD0, 0x2C,	0x1E, 0x8F,	0xCA, 0x3F,	0x0F, 0x02,
-	0xC1, 0xAF,	0xBD, 0x03,	0x01, 0x13,	0x8A, 0x6B,
-	0x3A, 0x91,	0x11, 0x41,	0x4F, 0x67,	0xDC, 0xEA,
-	0x97, 0xF2,	0xCF, 0xCE,	0xF0, 0xB4,	0xE6, 0x73,
-	0x96, 0xAC,	0x74, 0x22,	0xE7, 0xAD,	0x35, 0x85,
-	0xE2, 0xF9,	0x37, 0xE8,	0x1C, 0x75,	0xDF, 0x6E,
-	0x47, 0xF1,	0x1A, 0x71,	0x1D, 0x29,	0xC5, 0x89,
-	0x6F, 0xB7,	0x62, 0x0E,	0xAA, 0x18,	0xBE, 0x1B,
-	0xFC, 0x56,	0x3E, 0x4B,	0xC6, 0xD2,	0x79, 0x20,
-	0x9A, 0xDB,	0xC0, 0xFE,	0x78, 0xCD,	0x5A, 0xF4,
-	0x1F, 0xDD,	0xA8, 0x33,	0x88, 0x07,	0xC7, 0x31,
-	0xB1, 0x12,	0x10, 0x59,	0x27, 0x80,	0xEC, 0x5F,
-	0x60, 0x51,	0x7F, 0xA9,	0x19, 0xB5,	0x4A, 0x0D,
-	0x2D, 0xE5,	0x7A, 0x9F,	0x93, 0xC9,	0x9C, 0xEF,
-	0xA0, 0xE0,	0x3B, 0x4D,	0xAE, 0x2A,	0xF5, 0xB0,
-	0xC8, 0xEB,	0xBB, 0x3C,	0x83, 0x53,	0x99, 0x61,
-	0x17, 0x2B,	0x04, 0x7E,	0xBA, 0x77,	0xD6, 0x26,
-	0xE1, 0x69,	0x14, 0x63,	0x55, 0x21,	0x0C, 0x7D
-};
-
-/* reverse table */
-
-#define	RT \
-\
-	V(51,F4,A7,50),	V(7E,41,65,53),	V(1A,17,A4,C3),	V(3A,27,5E,96),	\
-	V(3B,AB,6B,CB),	V(1F,9D,45,F1),	V(AC,FA,58,AB),	V(4B,E3,03,93),	\
-	V(20,30,FA,55),	V(AD,76,6D,F6),	V(88,CC,76,91),	V(F5,02,4C,25),	\
-	V(4F,E5,D7,FC),	V(C5,2A,CB,D7),	V(26,35,44,80),	V(B5,62,A3,8F),	\
-	V(DE,B1,5A,49),	V(25,BA,1B,67),	V(45,EA,0E,98),	V(5D,FE,C0,E1),	\
-	V(C3,2F,75,02),	V(81,4C,F0,12),	V(8D,46,97,A3),	V(6B,D3,F9,C6),	\
-	V(03,8F,5F,E7),	V(15,92,9C,95),	V(BF,6D,7A,EB),	V(95,52,59,DA),	\
-	V(D4,BE,83,2D),	V(58,74,21,D3),	V(49,E0,69,29),	V(8E,C9,C8,44),	\
-	V(75,C2,89,6A),	V(F4,8E,79,78),	V(99,58,3E,6B),	V(27,B9,71,DD),	\
-	V(BE,E1,4F,B6),	V(F0,88,AD,17),	V(C9,20,AC,66),	V(7D,CE,3A,B4),	\
-	V(63,DF,4A,18),	V(E5,1A,31,82),	V(97,51,33,60),	V(62,53,7F,45),	\
-	V(B1,64,77,E0),	V(BB,6B,AE,84),	V(FE,81,A0,1C),	V(F9,08,2B,94),	\
-	V(70,48,68,58),	V(8F,45,FD,19),	V(94,DE,6C,87),	V(52,7B,F8,B7),	\
-	V(AB,73,D3,23),	V(72,4B,02,E2),	V(E3,1F,8F,57),	V(66,55,AB,2A),	\
-	V(B2,EB,28,07),	V(2F,B5,C2,03),	V(86,C5,7B,9A),	V(D3,37,08,A5),	\
-	V(30,28,87,F2),	V(23,BF,A5,B2),	V(02,03,6A,BA),	V(ED,16,82,5C),	\
-	V(8A,CF,1C,2B),	V(A7,79,B4,92),	V(F3,07,F2,F0),	V(4E,69,E2,A1),	\
-	V(65,DA,F4,CD),	V(06,05,BE,D5),	V(D1,34,62,1F),	V(C4,A6,FE,8A),	\
-	V(34,2E,53,9D),	V(A2,F3,55,A0),	V(05,8A,E1,32),	V(A4,F6,EB,75),	\
-	V(0B,83,EC,39),	V(40,60,EF,AA),	V(5E,71,9F,06),	V(BD,6E,10,51),	\
-	V(3E,21,8A,F9),	V(96,DD,06,3D),	V(DD,3E,05,AE),	V(4D,E6,BD,46),	\
-	V(91,54,8D,B5),	V(71,C4,5D,05),	V(04,06,D4,6F),	V(60,50,15,FF),	\
-	V(19,98,FB,24),	V(D6,BD,E9,97),	V(89,40,43,CC),	V(67,D9,9E,77),	\
-	V(B0,E8,42,BD),	V(07,89,8B,88),	V(E7,19,5B,38),	V(79,C8,EE,DB),	\
-	V(A1,7C,0A,47),	V(7C,42,0F,E9),	V(F8,84,1E,C9),	V(00,00,00,00),	\
-	V(09,80,86,83),	V(32,2B,ED,48),	V(1E,11,70,AC),	V(6C,5A,72,4E),	\
-	V(FD,0E,FF,FB),	V(0F,85,38,56),	V(3D,AE,D5,1E),	V(36,2D,39,27),	\
-	V(0A,0F,D9,64),	V(68,5C,A6,21),	V(9B,5B,54,D1),	V(24,36,2E,3A),	\
-	V(0C,0A,67,B1),	V(93,57,E7,0F),	V(B4,EE,96,D2),	V(1B,9B,91,9E),	\
-	V(80,C0,C5,4F),	V(61,DC,20,A2),	V(5A,77,4B,69),	V(1C,12,1A,16),	\
-	V(E2,93,BA,0A),	V(C0,A0,2A,E5),	V(3C,22,E0,43),	V(12,1B,17,1D),	\
-	V(0E,09,0D,0B),	V(F2,8B,C7,AD),	V(2D,B6,A8,B9),	V(14,1E,A9,C8),	\
-	V(57,F1,19,85),	V(AF,75,07,4C),	V(EE,99,DD,BB),	V(A3,7F,60,FD),	\
-	V(F7,01,26,9F),	V(5C,72,F5,BC),	V(44,66,3B,C5),	V(5B,FB,7E,34),	\
-	V(8B,43,29,76),	V(CB,23,C6,DC),	V(B6,ED,FC,68),	V(B8,E4,F1,63),	\
-	V(D7,31,DC,CA),	V(42,63,85,10),	V(13,97,22,40),	V(84,C6,11,20),	\
-	V(85,4A,24,7D),	V(D2,BB,3D,F8),	V(AE,F9,32,11),	V(C7,29,A1,6D),	\
-	V(1D,9E,2F,4B),	V(DC,B2,30,F3),	V(0D,86,52,EC),	V(77,C1,E3,D0),	\
-	V(2B,B3,16,6C),	V(A9,70,B9,99),	V(11,94,48,FA),	V(47,E9,64,22),	\
-	V(A8,FC,8C,C4),	V(A0,F0,3F,1A),	V(56,7D,2C,D8),	V(22,33,90,EF),	\
-	V(87,49,4E,C7),	V(D9,38,D1,C1),	V(8C,CA,A2,FE),	V(98,D4,0B,36),	\
-	V(A6,F5,81,CF),	V(A5,7A,DE,28),	V(DA,B7,8E,26),	V(3F,AD,BF,A4),	\
-	V(2C,3A,9D,E4),	V(50,78,92,0D),	V(6A,5F,CC,9B),	V(54,7E,46,62),	\
-	V(F6,8D,13,C2),	V(90,D8,B8,E8),	V(2E,39,F7,5E),	V(82,C3,AF,F5),	\
-	V(9F,5D,80,BE),	V(69,D0,93,7C),	V(6F,D5,2D,A9),	V(CF,25,12,B3),	\
-	V(C8,AC,99,3B),	V(10,18,7D,A7),	V(E8,9C,63,6E),	V(DB,3B,BB,7B),	\
-	V(CD,26,78,09),	V(6E,59,18,F4),	V(EC,9A,B7,01),	V(83,4F,9A,A8),	\
-	V(E6,95,6E,65),	V(AA,FF,E6,7E),	V(21,BC,CF,08),	V(EF,15,E8,E6),	\
-	V(BA,E7,9B,D9),	V(4A,6F,36,CE),	V(EA,9F,09,D4),	V(29,B0,7C,D6),	\
-	V(31,A4,B2,AF),	V(2A,3F,23,31),	V(C6,A5,94,30),	V(35,A2,66,C0),	\
-	V(74,4E,BC,37),	V(FC,82,CA,A6),	V(E0,90,D0,B0),	V(33,A7,D8,15),	\
-	V(F1,04,98,4A),	V(41,EC,DA,F7),	V(7F,CD,50,0E),	V(17,91,F6,2F),	\
-	V(76,4D,D6,8D),	V(43,EF,B0,4D),	V(CC,AA,4D,54),	V(E4,96,04,DF),	\
-	V(9E,D1,B5,E3),	V(4C,6A,88,1B),	V(C1,2C,1F,B8),	V(46,65,51,7F),	\
-	V(9D,5E,EA,04),	V(01,8C,35,5D),	V(FA,87,74,73),	V(FB,0B,41,2E),	\
-	V(B3,67,1D,5A),	V(92,DB,D2,52),	V(E9,10,56,33),	V(6D,D6,47,13),	\
-	V(9A,D7,61,8C),	V(37,A1,0C,7A),	V(59,F8,14,8E),	V(EB,13,3C,89),	\
-	V(CE,A9,27,EE),	V(B7,61,C9,35),	V(E1,1C,E5,ED),	V(7A,47,B1,3C),	\
-	V(9C,D2,DF,59),	V(55,F2,73,3F),	V(18,14,CE,79),	V(73,C7,37,BF),	\
-	V(53,F7,CD,EA),	V(5F,FD,AA,5B),	V(DF,3D,6F,14),	V(78,44,DB,86),	\
-	V(CA,AF,F3,81),	V(B9,68,C4,3E),	V(38,24,34,2C),	V(C2,A3,40,5F),	\
-	V(16,1D,C3,72),	V(BC,E2,25,0C),	V(28,3C,49,8B),	V(FF,0D,95,41),	\
-	V(39,A8,01,71),	V(08,0C,B3,DE),	V(D8,B4,E4,9C),	V(64,56,C1,90),	\
-	V(7B,CB,84,61),	V(D5,32,B6,70),	V(48,6C,5C,74),	V(D0,B8,57,42)
-
-#define	V(a,b,c,d) 0x##a##b##c##d
-static uint32 RT0[256] = { RT };
-#undef V
-
-#define	V(a,b,c,d) 0x##d##a##b##c
-static uint32 RT1[256] = { RT };
-#undef V
-
-#define	V(a,b,c,d) 0x##c##d##a##b
-static uint32 RT2[256] = { RT };
-#undef V
-
-#define	V(a,b,c,d) 0x##b##c##d##a
-static uint32 RT3[256] = { RT };
-#undef V
-
-#undef RT
-
-/* round constants */
-
-static uint32 RCON[10] =
-{
-	0x01000000,	0x02000000,	0x04000000,	0x08000000,
-	0x10000000,	0x20000000,	0x40000000,	0x80000000,
-	0x1B000000,	0x36000000
-};
-
-/* key schedule	tables */
-
-static int KT_init = 1;
-
-static uint32 KT0[256];
-static uint32 KT1[256];
-static uint32 KT2[256];
-static uint32 KT3[256];
-
-/* platform-independant	32-bit integer manipulation	macros */
-
-#define	GET_UINT32(n,b,i)						\
-{												\
-	(n)	= (	(uint32) (b)[(i)	] << 24	)		\
-		| (	(uint32) (b)[(i) + 1] << 16	)		\
-		| (	(uint32) (b)[(i) + 2] <<  8	)		\
-		| (	(uint32) (b)[(i) + 3]		);		\
-}
-
-#define	PUT_UINT32(n,b,i)						\
-{												\
-	(b)[(i)	   ] = (uint8) ( (n) >>	24 );		\
-	(b)[(i)	+ 1] = (uint8) ( (n) >>	16 );		\
-	(b)[(i)	+ 2] = (uint8) ( (n) >>	 8 );		\
-	(b)[(i)	+ 3] = (uint8) ( (n)	   );		\
-}
-
-/* AES key scheduling routine */
-
-int	rtmp_aes_set_key( aes_context *ctx, uint8 *key, int nbits )
-{
-	int	i;
-	uint32 *RK,	*SK;
-
-	switch(	nbits )
-	{
-		case 128: ctx->nr =	10;	break;
-		case 192: ctx->nr =	12;	break;
-		case 256: ctx->nr =	14;	break;
-		default	: return( 1	);
-	}
-
-	RK = ctx->erk;
-
-	for( i = 0;	i <	(nbits >> 5); i++ )
-	{
-		GET_UINT32(	RK[i], key,	i *	4 );
-	}
-
-	/* setup encryption	round keys */
-
-	switch(	nbits )
-	{
-	case 128:
-
-		for( i = 0;	i <	10;	i++, RK	+= 4 )
-		{
-			RK[4]  = RK[0] ^ RCON[i] ^
-						( FSb[ (uint8) ( RK[3] >> 16 ) ] <<	24 ) ^
-						( FSb[ (uint8) ( RK[3] >>  8 ) ] <<	16 ) ^
-						( FSb[ (uint8) ( RK[3]		 ) ] <<	 8 ) ^
-						( FSb[ (uint8) ( RK[3] >> 24 ) ]	   );
-
-			RK[5]  = RK[1] ^ RK[4];
-			RK[6]  = RK[2] ^ RK[5];
-			RK[7]  = RK[3] ^ RK[6];
-		}
-		break;
-
-	case 192:
-
-		for( i = 0;	i <	8; i++,	RK += 6	)
-		{
-			RK[6]  = RK[0] ^ RCON[i] ^
-						( FSb[ (uint8) ( RK[5] >> 16 ) ] <<	24 ) ^
-						( FSb[ (uint8) ( RK[5] >>  8 ) ] <<	16 ) ^
-						( FSb[ (uint8) ( RK[5]		 ) ] <<	 8 ) ^
-						( FSb[ (uint8) ( RK[5] >> 24 ) ]	   );
-
-			RK[7]  = RK[1] ^ RK[6];
-			RK[8]  = RK[2] ^ RK[7];
-			RK[9]  = RK[3] ^ RK[8];
-			RK[10] = RK[4] ^ RK[9];
-			RK[11] = RK[5] ^ RK[10];
-		}
-		break;
-
-	case 256:
-
-		for( i = 0;	i <	7; i++,	RK += 8	)
-		{
-			RK[8]  = RK[0] ^ RCON[i] ^
-						( FSb[ (uint8) ( RK[7] >> 16 ) ] <<	24 ) ^
-						( FSb[ (uint8) ( RK[7] >>  8 ) ] <<	16 ) ^
-						( FSb[ (uint8) ( RK[7]		 ) ] <<	 8 ) ^
-						( FSb[ (uint8) ( RK[7] >> 24 ) ]	   );
-
-			RK[9]  = RK[1] ^ RK[8];
-			RK[10] = RK[2] ^ RK[9];
-			RK[11] = RK[3] ^ RK[10];
-
-			RK[12] = RK[4] ^
-						( FSb[ (uint8) ( RK[11]	>> 24 )	] << 24	) ^
-						( FSb[ (uint8) ( RK[11]	>> 16 )	] << 16	) ^
-						( FSb[ (uint8) ( RK[11]	>>	8 )	] <<  8	) ^
-						( FSb[ (uint8) ( RK[11]		  )	]		);
-
-			RK[13] = RK[5] ^ RK[12];
-			RK[14] = RK[6] ^ RK[13];
-			RK[15] = RK[7] ^ RK[14];
-		}
-		break;
-	}
-
-	/* setup decryption	round keys */
-
-	if(	KT_init	)
-	{
-		for( i = 0;	i <	256; i++ )
-		{
-			KT0[i] = RT0[ FSb[i] ];
-			KT1[i] = RT1[ FSb[i] ];
-			KT2[i] = RT2[ FSb[i] ];
-			KT3[i] = RT3[ FSb[i] ];
-		}
-
-		KT_init	= 0;
-	}
-
-	SK = ctx->drk;
-
-	*SK++ =	*RK++;
-	*SK++ =	*RK++;
-	*SK++ =	*RK++;
-	*SK++ =	*RK++;
-
-	for( i = 1;	i <	ctx->nr; i++ )
-	{
-		RK -= 8;
-
-		*SK++ =	KT0[ (uint8) ( *RK >> 24 ) ] ^
-				KT1[ (uint8) ( *RK >> 16 ) ] ^
-				KT2[ (uint8) ( *RK >>  8 ) ] ^
-				KT3[ (uint8) ( *RK		 ) ]; RK++;
-
-		*SK++ =	KT0[ (uint8) ( *RK >> 24 ) ] ^
-				KT1[ (uint8) ( *RK >> 16 ) ] ^
-				KT2[ (uint8) ( *RK >>  8 ) ] ^
-				KT3[ (uint8) ( *RK		 ) ]; RK++;
-
-		*SK++ =	KT0[ (uint8) ( *RK >> 24 ) ] ^
-				KT1[ (uint8) ( *RK >> 16 ) ] ^
-				KT2[ (uint8) ( *RK >>  8 ) ] ^
-				KT3[ (uint8) ( *RK		 ) ]; RK++;
-
-		*SK++ =	KT0[ (uint8) ( *RK >> 24 ) ] ^
-				KT1[ (uint8) ( *RK >> 16 ) ] ^
-				KT2[ (uint8) ( *RK >>  8 ) ] ^
-				KT3[ (uint8) ( *RK		 ) ]; RK++;
-	}
-
-	RK -= 8;
-
-	*SK++ =	*RK++;
-	*SK++ =	*RK++;
-	*SK++ =	*RK++;
-	*SK++ =	*RK++;
-
-	return(	0 );
-}
-
-/* AES 128-bit block encryption	routine	*/
-
-void rtmp_aes_encrypt(aes_context *ctx, uint8 input[16],	uint8 output[16] )
-{
-	uint32 *RK,	X0,	X1,	X2,	X3,	Y0,	Y1,	Y2,	Y3;
-
-	RK = ctx->erk;
-	GET_UINT32(	X0,	input,	0 ); X0	^= RK[0];
-	GET_UINT32(	X1,	input,	4 ); X1	^= RK[1];
-	GET_UINT32(	X2,	input,	8 ); X2	^= RK[2];
-	GET_UINT32(	X3,	input, 12 ); X3	^= RK[3];
-
-#define	AES_FROUND(X0,X1,X2,X3,Y0,Y1,Y2,Y3)		\
-{												\
-	RK += 4;									\
-												\
-	X0 = RK[0] ^ FT0[ (uint8) (	Y0 >> 24 ) ] ^	\
-				 FT1[ (uint8) (	Y1 >> 16 ) ] ^	\
-				 FT2[ (uint8) (	Y2 >>  8 ) ] ^	\
-				 FT3[ (uint8) (	Y3		 ) ];	\
-												\
-	X1 = RK[1] ^ FT0[ (uint8) (	Y1 >> 24 ) ] ^	\
-				 FT1[ (uint8) (	Y2 >> 16 ) ] ^	\
-				 FT2[ (uint8) (	Y3 >>  8 ) ] ^	\
-				 FT3[ (uint8) (	Y0		 ) ];	\
-												\
-	X2 = RK[2] ^ FT0[ (uint8) (	Y2 >> 24 ) ] ^	\
-				 FT1[ (uint8) (	Y3 >> 16 ) ] ^	\
-				 FT2[ (uint8) (	Y0 >>  8 ) ] ^	\
-				 FT3[ (uint8) (	Y1		 ) ];	\
-												\
-	X3 = RK[3] ^ FT0[ (uint8) (	Y3 >> 24 ) ] ^	\
-				 FT1[ (uint8) (	Y0 >> 16 ) ] ^	\
-				 FT2[ (uint8) (	Y1 >>  8 ) ] ^	\
-				 FT3[ (uint8) (	Y2		 ) ];	\
-}
-
-	AES_FROUND(	Y0,	Y1,	Y2,	Y3,	X0,	X1,	X2,	X3 );		/* round 1 */
-	AES_FROUND(	X0,	X1,	X2,	X3,	Y0,	Y1,	Y2,	Y3 );		/* round 2 */
-	AES_FROUND(	Y0,	Y1,	Y2,	Y3,	X0,	X1,	X2,	X3 );		/* round 3 */
-	AES_FROUND(	X0,	X1,	X2,	X3,	Y0,	Y1,	Y2,	Y3 );		/* round 4 */
-	AES_FROUND(	Y0,	Y1,	Y2,	Y3,	X0,	X1,	X2,	X3 );		/* round 5 */
-	AES_FROUND(	X0,	X1,	X2,	X3,	Y0,	Y1,	Y2,	Y3 );		/* round 6 */
-	AES_FROUND(	Y0,	Y1,	Y2,	Y3,	X0,	X1,	X2,	X3 );		/* round 7 */
-	AES_FROUND(	X0,	X1,	X2,	X3,	Y0,	Y1,	Y2,	Y3 );		/* round 8 */
-	AES_FROUND(	Y0,	Y1,	Y2,	Y3,	X0,	X1,	X2,	X3 );		/* round 9 */
-
-	if(	ctx->nr	> 10 )
-	{
-		AES_FROUND(	X0,	X1,	X2,	X3,	Y0,	Y1,	Y2,	Y3 );	/* round 10	*/
-		AES_FROUND(	Y0,	Y1,	Y2,	Y3,	X0,	X1,	X2,	X3 );	/* round 11	*/
-	}
-
-	if(	ctx->nr	> 12 )
-	{
-		AES_FROUND(	X0,	X1,	X2,	X3,	Y0,	Y1,	Y2,	Y3 );	/* round 12	*/
-		AES_FROUND(	Y0,	Y1,	Y2,	Y3,	X0,	X1,	X2,	X3 );	/* round 13	*/
-	}
-
-	/* last	round */
-
-	RK += 4;
-
-	X0 = RK[0] ^ ( FSb[	(uint8)	( Y0 >>	24 ) ] << 24 ) ^
-				 ( FSb[	(uint8)	( Y1 >>	16 ) ] << 16 ) ^
-				 ( FSb[	(uint8)	( Y2 >>	 8 ) ] <<  8 ) ^
-				 ( FSb[	(uint8)	( Y3	   ) ]		 );
-
-	X1 = RK[1] ^ ( FSb[	(uint8)	( Y1 >>	24 ) ] << 24 ) ^
-				 ( FSb[	(uint8)	( Y2 >>	16 ) ] << 16 ) ^
-				 ( FSb[	(uint8)	( Y3 >>	 8 ) ] <<  8 ) ^
-				 ( FSb[	(uint8)	( Y0	   ) ]		 );
-
-	X2 = RK[2] ^ ( FSb[	(uint8)	( Y2 >>	24 ) ] << 24 ) ^
-				 ( FSb[	(uint8)	( Y3 >>	16 ) ] << 16 ) ^
-				 ( FSb[	(uint8)	( Y0 >>	 8 ) ] <<  8 ) ^
-				 ( FSb[	(uint8)	( Y1	   ) ]		 );
-
-	X3 = RK[3] ^ ( FSb[	(uint8)	( Y3 >>	24 ) ] << 24 ) ^
-				 ( FSb[	(uint8)	( Y0 >>	16 ) ] << 16 ) ^
-				 ( FSb[	(uint8)	( Y1 >>	 8 ) ] <<  8 ) ^
-				 ( FSb[	(uint8)	( Y2	   ) ]		 );
-
-	PUT_UINT32(	X0,	output,	 0 );
-	PUT_UINT32(	X1,	output,	 4 );
-	PUT_UINT32(	X2,	output,	 8 );
-	PUT_UINT32(	X3,	output,	12 );
-}
-
-/* AES 128-bit block decryption	routine	*/
-
-void rtmp_aes_decrypt( aes_context *ctx,	uint8 input[16], uint8 output[16] )
-{
-	uint32 *RK,	X0,	X1,	X2,	X3,	Y0,	Y1,	Y2,	Y3;
-
-	RK = ctx->drk;
-
-	GET_UINT32(	X0,	input,	0 ); X0	^= RK[0];
-	GET_UINT32(	X1,	input,	4 ); X1	^= RK[1];
-	GET_UINT32(	X2,	input,	8 ); X2	^= RK[2];
-	GET_UINT32(	X3,	input, 12 ); X3	^= RK[3];
-
-#define	AES_RROUND(X0,X1,X2,X3,Y0,Y1,Y2,Y3)		\
-{												\
-	RK += 4;									\
-												\
-	X0 = RK[0] ^ RT0[ (uint8) (	Y0 >> 24 ) ] ^	\
-				 RT1[ (uint8) (	Y3 >> 16 ) ] ^	\
-				 RT2[ (uint8) (	Y2 >>  8 ) ] ^	\
-				 RT3[ (uint8) (	Y1		 ) ];	\
-												\
-	X1 = RK[1] ^ RT0[ (uint8) (	Y1 >> 24 ) ] ^	\
-				 RT1[ (uint8) (	Y0 >> 16 ) ] ^	\
-				 RT2[ (uint8) (	Y3 >>  8 ) ] ^	\
-				 RT3[ (uint8) (	Y2		 ) ];	\
-												\
-	X2 = RK[2] ^ RT0[ (uint8) (	Y2 >> 24 ) ] ^	\
-				 RT1[ (uint8) (	Y1 >> 16 ) ] ^	\
-				 RT2[ (uint8) (	Y0 >>  8 ) ] ^	\
-				 RT3[ (uint8) (	Y3		 ) ];	\
-												\
-	X3 = RK[3] ^ RT0[ (uint8) (	Y3 >> 24 ) ] ^	\
-				 RT1[ (uint8) (	Y2 >> 16 ) ] ^	\
-				 RT2[ (uint8) (	Y1 >>  8 ) ] ^	\
-				 RT3[ (uint8) (	Y0		 ) ];	\
-}
-
-	AES_RROUND(	Y0,	Y1,	Y2,	Y3,	X0,	X1,	X2,	X3 );		/* round 1 */
-	AES_RROUND(	X0,	X1,	X2,	X3,	Y0,	Y1,	Y2,	Y3 );		/* round 2 */
-	AES_RROUND(	Y0,	Y1,	Y2,	Y3,	X0,	X1,	X2,	X3 );		/* round 3 */
-	AES_RROUND(	X0,	X1,	X2,	X3,	Y0,	Y1,	Y2,	Y3 );		/* round 4 */
-	AES_RROUND(	Y0,	Y1,	Y2,	Y3,	X0,	X1,	X2,	X3 );		/* round 5 */
-	AES_RROUND(	X0,	X1,	X2,	X3,	Y0,	Y1,	Y2,	Y3 );		/* round 6 */
-	AES_RROUND(	Y0,	Y1,	Y2,	Y3,	X0,	X1,	X2,	X3 );		/* round 7 */
-	AES_RROUND(	X0,	X1,	X2,	X3,	Y0,	Y1,	Y2,	Y3 );		/* round 8 */
-	AES_RROUND(	Y0,	Y1,	Y2,	Y3,	X0,	X1,	X2,	X3 );		/* round 9 */
-
-	if(	ctx->nr	> 10 )
-	{
-		AES_RROUND(	X0,	X1,	X2,	X3,	Y0,	Y1,	Y2,	Y3 );	/* round 10	*/
-		AES_RROUND(	Y0,	Y1,	Y2,	Y3,	X0,	X1,	X2,	X3 );	/* round 11	*/
-	}
-
-	if(	ctx->nr	> 12 )
-	{
-		AES_RROUND(	X0,	X1,	X2,	X3,	Y0,	Y1,	Y2,	Y3 );	/* round 12	*/
-		AES_RROUND(	Y0,	Y1,	Y2,	Y3,	X0,	X1,	X2,	X3 );	/* round 13	*/
-	}
-
-	/* last	round */
-
-	RK += 4;
-
-	X0 = RK[0] ^ ( RSb[	(uint8)	( Y0 >>	24 ) ] << 24 ) ^
-				 ( RSb[	(uint8)	( Y3 >>	16 ) ] << 16 ) ^
-				 ( RSb[	(uint8)	( Y2 >>	 8 ) ] <<  8 ) ^
-				 ( RSb[	(uint8)	( Y1	   ) ]		 );
-
-	X1 = RK[1] ^ ( RSb[	(uint8)	( Y1 >>	24 ) ] << 24 ) ^
-				 ( RSb[	(uint8)	( Y0 >>	16 ) ] << 16 ) ^
-				 ( RSb[	(uint8)	( Y3 >>	 8 ) ] <<  8 ) ^
-				 ( RSb[	(uint8)	( Y2	   ) ]		 );
-
-	X2 = RK[2] ^ ( RSb[	(uint8)	( Y2 >>	24 ) ] << 24 ) ^
-				 ( RSb[	(uint8)	( Y1 >>	16 ) ] << 16 ) ^
-				 ( RSb[	(uint8)	( Y0 >>	 8 ) ] <<  8 ) ^
-				 ( RSb[	(uint8)	( Y3	   ) ]		 );
-
-	X3 = RK[3] ^ ( RSb[	(uint8)	( Y3 >>	24 ) ] << 24 ) ^
-				 ( RSb[	(uint8)	( Y2 >>	16 ) ] << 16 ) ^
-				 ( RSb[	(uint8)	( Y1 >>	 8 ) ] <<  8 ) ^
-				 ( RSb[	(uint8)	( Y0	   ) ]		 );
-
-	PUT_UINT32(	X0,	output,	 0 );
-	PUT_UINT32(	X1,	output,	 4 );
-	PUT_UINT32(	X2,	output,	 8 );
-	PUT_UINT32(	X3,	output,	12 );
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		SHA1 function
-
-	Arguments:
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-VOID	HMAC_SHA1(
-	IN	UCHAR	*text,
-	IN	UINT	text_len,
-	IN	UCHAR	*key,
-	IN	UINT	key_len,
-	IN	UCHAR	*digest)
-{
-	SHA_CTX	context;
-	UCHAR	k_ipad[65]; /* inner padding - key XORd with ipad	*/
-	UCHAR	k_opad[65]; /* outer padding - key XORd with opad	*/
-	INT		i;
-
-	// if key is longer	than 64	bytes reset	it to key=SHA1(key)
-	if (key_len	> 64)
-	{
-		SHA_CTX		 tctx;
-		SHAInit(&tctx);
-		SHAUpdate(&tctx, key, key_len);
-		SHAFinal(&tctx,	key);
-		key_len	= 20;
-	}
-	NdisZeroMemory(k_ipad, sizeof(k_ipad));
-	NdisZeroMemory(k_opad, sizeof(k_opad));
-	NdisMoveMemory(k_ipad, key,	key_len);
-	NdisMoveMemory(k_opad, key,	key_len);
-
-	// XOR key with	ipad and opad values
-	for	(i = 0;	i <	64;	i++)
-	{
-		k_ipad[i] ^= 0x36;
-		k_opad[i] ^= 0x5c;
-	}
-
-	// perform inner SHA1
-	SHAInit(&context); 						/* init context for 1st pass */
-	SHAUpdate(&context,	k_ipad,	64);		/*	start with inner pad */
-	SHAUpdate(&context,	text, text_len);	/*	then text of datagram */
-	SHAFinal(&context, digest);				/* finish up 1st pass */
-
-	//perform outer	SHA1
-	SHAInit(&context);					/* init context for 2nd pass */
-	SHAUpdate(&context,	k_opad,	64);	/*	start with outer pad */
-	SHAUpdate(&context,	digest,	20);	/*	then results of	1st	hash */
-	SHAFinal(&context, digest);			/* finish up 2nd pass */
-
-}
-
-/*
-* F(P, S, c, i) = U1 xor U2 xor ... Uc
-* U1 = PRF(P, S || Int(i))
-* U2 = PRF(P, U1)
-* Uc = PRF(P, Uc-1)
-*/
-
-void F(char *password, unsigned char *ssid, int ssidlength, int iterations, int count, unsigned char *output)
-{
-    unsigned char digest[36], digest1[SHA_DIGEST_LEN];
-    int i, j;
-
-    /* U1 = PRF(P, S || int(i)) */
-    memcpy(digest, ssid, ssidlength);
-    digest[ssidlength] = (unsigned char)((count>>24) & 0xff);
-    digest[ssidlength+1] = (unsigned char)((count>>16) & 0xff);
-    digest[ssidlength+2] = (unsigned char)((count>>8) & 0xff);
-    digest[ssidlength+3] = (unsigned char)(count & 0xff);
-    HMAC_SHA1(digest, ssidlength+4, (unsigned char*) password, (int) strlen(password), digest1); // for WPA update
-
-    /* output = U1 */
-    memcpy(output, digest1, SHA_DIGEST_LEN);
-
-    for (i = 1; i < iterations; i++)
-    {
-        /* Un = PRF(P, Un-1) */
-        HMAC_SHA1(digest1, SHA_DIGEST_LEN, (unsigned char*) password, (int) strlen(password), digest); // for WPA update
-        memcpy(digest1, digest, SHA_DIGEST_LEN);
-
-        /* output = output xor Un */
-        for (j = 0; j < SHA_DIGEST_LEN; j++)
-        {
-            output[j] ^= digest[j];
-        }
-    }
-}
-/*
-* password - ascii string up to 63 characters in length
-* ssid - octet string up to 32 octets
-* ssidlength - length of ssid in octets
-* output must be 40 octets in length and outputs 256 bits of key
-*/
-int PasswordHash(char *password, unsigned char *ssid, int ssidlength, unsigned char *output)
-{
-    if ((strlen(password) > 63) || (ssidlength > 32))
-        return 0;
-
-    F(password, ssid, ssidlength, 4096, 1, output);
-    F(password, ssid, ssidlength, 4096, 2, &output[SHA_DIGEST_LEN]);
-    return 1;
-}
-
-
+#include "../../rt2860/common/md5.c"
diff --git a/drivers/staging/rt2870/common/mlme.c b/drivers/staging/rt2870/common/mlme.c
index a26bc033337..f88040abd26 100644
--- a/drivers/staging/rt2870/common/mlme.c
+++ b/drivers/staging/rt2870/common/mlme.c
@@ -1,8609 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	mlme.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	John Chang	2004-08-25		Modify from RT2500 code base
-	John Chang	2004-09-06		modified for RT2600
-*/
-
-#include "../rt_config.h"
-#include <stdarg.h>
-
-UCHAR	CISCO_OUI[] = {0x00, 0x40, 0x96};
-
-UCHAR	WPA_OUI[] = {0x00, 0x50, 0xf2, 0x01};
-UCHAR	RSN_OUI[] = {0x00, 0x0f, 0xac};
-UCHAR	WAPI_OUI[] = {0x00, 0x14, 0x72};
-UCHAR   WME_INFO_ELEM[]  = {0x00, 0x50, 0xf2, 0x02, 0x00, 0x01};
-UCHAR   WME_PARM_ELEM[] = {0x00, 0x50, 0xf2, 0x02, 0x01, 0x01};
-UCHAR	Ccx2QosInfo[] = {0x00, 0x40, 0x96, 0x04};
-UCHAR   RALINK_OUI[]  = {0x00, 0x0c, 0x43};
-UCHAR   BROADCOM_OUI[]  = {0x00, 0x90, 0x4c};
-UCHAR   WPS_OUI[] = {0x00, 0x50, 0xf2, 0x04};
-#ifdef CONFIG_STA_SUPPORT
-#ifdef DOT11_N_SUPPORT
-UCHAR	PRE_N_HT_OUI[]	= {0x00, 0x90, 0x4c};
-#endif // DOT11_N_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
-UCHAR RateSwitchTable[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-    0x11, 0x00,  0,  0,  0,						// Initial used item after association
-    0x00, 0x00,  0, 40, 101,
-    0x01, 0x00,  1, 40, 50,
-    0x02, 0x00,  2, 35, 45,
-    0x03, 0x00,  3, 20, 45,
-    0x04, 0x21,  0, 30, 50,
-    0x05, 0x21,  1, 20, 50,
-    0x06, 0x21,  2, 20, 50,
-    0x07, 0x21,  3, 15, 50,
-    0x08, 0x21,  4, 15, 30,
-    0x09, 0x21,  5, 10, 25,
-    0x0a, 0x21,  6,  8, 25,
-    0x0b, 0x21,  7,  8, 25,
-    0x0c, 0x20, 12,  15, 30,
-    0x0d, 0x20, 13,  8, 20,
-    0x0e, 0x20, 14,  8, 20,
-    0x0f, 0x20, 15,  8, 25,
-    0x10, 0x22, 15,  8, 25,
-    0x11, 0x00,  0,  0,  0,
-    0x12, 0x00,  0,  0,  0,
-    0x13, 0x00,  0,  0,  0,
-    0x14, 0x00,  0,  0,  0,
-    0x15, 0x00,  0,  0,  0,
-    0x16, 0x00,  0,  0,  0,
-    0x17, 0x00,  0,  0,  0,
-    0x18, 0x00,  0,  0,  0,
-    0x19, 0x00,  0,  0,  0,
-    0x1a, 0x00,  0,  0,  0,
-    0x1b, 0x00,  0,  0,  0,
-    0x1c, 0x00,  0,  0,  0,
-    0x1d, 0x00,  0,  0,  0,
-    0x1e, 0x00,  0,  0,  0,
-    0x1f, 0x00,  0,  0,  0,
-};
-
-UCHAR RateSwitchTable11B[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-    0x04, 0x03,  0,  0,  0,						// Initial used item after association
-    0x00, 0x00,  0, 40, 101,
-    0x01, 0x00,  1, 40, 50,
-    0x02, 0x00,  2, 35, 45,
-    0x03, 0x00,  3, 20, 45,
-};
-
-UCHAR RateSwitchTable11BG[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-    0x0a, 0x00,  0,  0,  0,						// Initial used item after association
-    0x00, 0x00,  0, 40, 101,
-    0x01, 0x00,  1, 40, 50,
-    0x02, 0x00,  2, 35, 45,
-    0x03, 0x00,  3, 20, 45,
-    0x04, 0x10,  2, 20, 35,
-    0x05, 0x10,  3, 16, 35,
-    0x06, 0x10,  4, 10, 25,
-    0x07, 0x10,  5, 16, 25,
-    0x08, 0x10,  6, 10, 25,
-    0x09, 0x10,  7, 10, 13,
-};
-
-UCHAR RateSwitchTable11G[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-    0x08, 0x00,  0,  0,  0,						// Initial used item after association
-    0x00, 0x10,  0, 20, 101,
-    0x01, 0x10,  1, 20, 35,
-    0x02, 0x10,  2, 20, 35,
-    0x03, 0x10,  3, 16, 35,
-    0x04, 0x10,  4, 10, 25,
-    0x05, 0x10,  5, 16, 25,
-    0x06, 0x10,  6, 10, 25,
-    0x07, 0x10,  7, 10, 13,
-};
-
-#ifdef DOT11_N_SUPPORT
-UCHAR RateSwitchTable11N1S[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-    0x09, 0x00,  0,  0,  0,						// Initial used item after association
-    0x00, 0x21,  0, 30, 101,
-    0x01, 0x21,  1, 20, 50,
-    0x02, 0x21,  2, 20, 50,
-    0x03, 0x21,  3, 15, 50,
-    0x04, 0x21,  4, 15, 30,
-    0x05, 0x21,  5, 10, 25,
-    0x06, 0x21,  6,  8, 14,
-    0x07, 0x21,  7,  8, 14,
-    0x08, 0x23,  7,  8, 14,
-};
-
-UCHAR RateSwitchTable11N2S[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-    0x0a, 0x00,  0,  0,  0,      // Initial used item after association
-    0x00, 0x21,  0, 30, 101,
-    0x01, 0x21,  1, 20, 50,
-    0x02, 0x21,  2, 20, 50,
-    0x03, 0x21,  3, 15, 50,
-    0x04, 0x21,  4, 15, 30,
-    0x05, 0x20, 12,  15, 30,
-    0x06, 0x20, 13,  8, 20,
-    0x07, 0x20, 14,  8, 20,
-    0x08, 0x20, 15,  8, 25,
-    0x09, 0x22, 15,  8, 25,
-};
-
-UCHAR RateSwitchTable11N3S[] = {
-// Item No.	Mode	Curr-MCS	TrainUp	TrainDown	// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-    0x0a, 0x00,  0,  0,  0,      // Initial used item after association
-    0x00, 0x21,  0, 30, 101,
-    0x01, 0x21,  1, 20, 50,
-    0x02, 0x21,  2, 20, 50,
-    0x03, 0x21,  3, 15, 50,
-    0x04, 0x21,  4, 15, 30,
-    0x05, 0x20, 12,  15, 30,
-    0x06, 0x20, 13,  8, 20,
-    0x07, 0x20, 14,  8, 20,
-    0x08, 0x20, 15,  8, 25,
-    0x09, 0x22, 15,  8, 25,
-};
-
-UCHAR RateSwitchTable11N2SForABand[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-    0x0b, 0x09,  0,  0,  0,						// Initial used item after association
-    0x00, 0x21,  0, 30, 101,
-    0x01, 0x21,  1, 20, 50,
-    0x02, 0x21,  2, 20, 50,
-    0x03, 0x21,  3, 15, 50,
-    0x04, 0x21,  4, 15, 30,
-    0x05, 0x21,  5, 15, 30,
-    0x06, 0x20, 12,  15, 30,
-    0x07, 0x20, 13,  8, 20,
-    0x08, 0x20, 14,  8, 20,
-    0x09, 0x20, 15,  8, 25,
-    0x0a, 0x22, 15,  8, 25,
-};
-
-UCHAR RateSwitchTable11N3SForABand[] = { // 3*3
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-    0x0b, 0x09,  0,  0,  0,						// Initial used item after association
-    0x00, 0x21,  0, 30, 101,
-    0x01, 0x21,  1, 20, 50,
-    0x02, 0x21,  2, 20, 50,
-    0x03, 0x21,  3, 15, 50,
-    0x04, 0x21,  4, 15, 30,
-    0x05, 0x21,  5, 15, 30,
-    0x06, 0x20, 12,  15, 30,
-    0x07, 0x20, 13,  8, 20,
-    0x08, 0x20, 14,  8, 20,
-    0x09, 0x20, 15,  8, 25,
-    0x0a, 0x22, 15,  8, 25,
-};
-
-UCHAR RateSwitchTable11BGN1S[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-    0x0d, 0x00,  0,  0,  0,						// Initial used item after association
-    0x00, 0x00,  0, 40, 101,
-    0x01, 0x00,  1, 40, 50,
-    0x02, 0x00,  2, 35, 45,
-    0x03, 0x00,  3, 20, 45,
-    0x04, 0x21,  0, 30,101,	//50
-    0x05, 0x21,  1, 20, 50,
-    0x06, 0x21,  2, 20, 50,
-    0x07, 0x21,  3, 15, 50,
-    0x08, 0x21,  4, 15, 30,
-    0x09, 0x21,  5, 10, 25,
-    0x0a, 0x21,  6,  8, 14,
-    0x0b, 0x21,  7,  8, 14,
-	0x0c, 0x23,  7,  8, 14,
-};
-
-UCHAR RateSwitchTable11BGN2S[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-    0x0a, 0x00,  0,  0,  0,						// Initial used item after association
-    0x00, 0x21,  0, 30,101,	//50
-    0x01, 0x21,  1, 20, 50,
-    0x02, 0x21,  2, 20, 50,
-    0x03, 0x21,  3, 15, 50,
-    0x04, 0x21,  4, 15, 30,
-    0x05, 0x20, 12, 15, 30,
-    0x06, 0x20, 13,  8, 20,
-    0x07, 0x20, 14,  8, 20,
-    0x08, 0x20, 15,  8, 25,
-    0x09, 0x22, 15,  8, 25,
-};
-
-UCHAR RateSwitchTable11BGN3S[] = { // 3*3
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-    0x0a, 0x00,  0,  0,  0,						// Initial used item after association
-    0x00, 0x21,  0, 30,101,	//50
-    0x01, 0x21,  1, 20, 50,
-    0x02, 0x21,  2, 20, 50,
-    0x03, 0x21,  3, 20, 50,
-    0x04, 0x21,  4, 15, 50,
-#if 1
-    0x05, 0x20, 20, 15, 30,
-    0x06, 0x20, 21,  8, 20,
-    0x07, 0x20, 22,  8, 20,
-    0x08, 0x20, 23,  8, 25,
-    0x09, 0x22, 23,  8, 25,
-#else // for RT2860 2*3 test
-    0x05, 0x20, 12, 15, 30,
-    0x06, 0x20, 13,  8, 20,
-    0x07, 0x20, 14,  8, 20,
-    0x08, 0x20, 15,  8, 25,
-    0x09, 0x22, 15,  8, 25,
-#endif
-};
-
-UCHAR RateSwitchTable11BGN2SForABand[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-    0x0b, 0x09,  0,  0,  0,						// Initial used item after association
-    0x00, 0x21,  0, 30,101,	//50
-    0x01, 0x21,  1, 20, 50,
-    0x02, 0x21,  2, 20, 50,
-    0x03, 0x21,  3, 15, 50,
-    0x04, 0x21,  4, 15, 30,
-    0x05, 0x21,  5, 15, 30,
-    0x06, 0x20, 12, 15, 30,
-    0x07, 0x20, 13,  8, 20,
-    0x08, 0x20, 14,  8, 20,
-    0x09, 0x20, 15,  8, 25,
-    0x0a, 0x22, 15,  8, 25,
-};
-
-UCHAR RateSwitchTable11BGN3SForABand[] = { // 3*3
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-    0x0c, 0x09,  0,  0,  0,						// Initial used item after association
-    0x00, 0x21,  0, 30,101,	//50
-    0x01, 0x21,  1, 20, 50,
-    0x02, 0x21,  2, 20, 50,
-    0x03, 0x21,  3, 15, 50,
-    0x04, 0x21,  4, 15, 30,
-    0x05, 0x21,  5, 15, 30,
-    0x06, 0x21, 12, 15, 30,
-    0x07, 0x20, 20, 15, 30,
-    0x08, 0x20, 21,  8, 20,
-    0x09, 0x20, 22,  8, 20,
-    0x0a, 0x20, 23,  8, 25,
-    0x0b, 0x22, 23,  8, 25,
-};
-#endif // DOT11_N_SUPPORT //
-
-PUCHAR ReasonString[] = {
-	/* 0  */	 "Reserved",
-	/* 1  */	 "Unspecified Reason",
-	/* 2  */	 "Previous Auth no longer valid",
-	/* 3  */	 "STA is leaving / has left",
-	/* 4  */	 "DIS-ASSOC due to inactivity",
-	/* 5  */	 "AP unable to hanle all associations",
-	/* 6  */	 "class 2 error",
-	/* 7  */	 "class 3 error",
-	/* 8  */	 "STA is leaving / has left",
-	/* 9  */	 "require auth before assoc/re-assoc",
-	/* 10 */	 "Reserved",
-	/* 11 */	 "Reserved",
-	/* 12 */	 "Reserved",
-	/* 13 */	 "invalid IE",
-	/* 14 */	 "MIC error",
-	/* 15 */	 "4-way handshake timeout",
-	/* 16 */	 "2-way (group key) handshake timeout",
-	/* 17 */	 "4-way handshake IE diff among AssosReq/Rsp/Beacon",
-	/* 18 */
-};
-
-extern UCHAR	 OfdmRateToRxwiMCS[];
-// since RT61 has better RX sensibility, we have to limit TX ACK rate not to exceed our normal data TX rate.
-// otherwise the WLAN peer may not be able to receive the ACK thus downgrade its data TX rate
-ULONG BasicRateMask[12]				= {0xfffff001 /* 1-Mbps */, 0xfffff003 /* 2 Mbps */, 0xfffff007 /* 5.5 */, 0xfffff00f /* 11 */,
-									  0xfffff01f /* 6 */	 , 0xfffff03f /* 9 */	  , 0xfffff07f /* 12 */ , 0xfffff0ff /* 18 */,
-									  0xfffff1ff /* 24 */	 , 0xfffff3ff /* 36 */	  , 0xfffff7ff /* 48 */ , 0xffffffff /* 54 */};
-
-UCHAR MULTICAST_ADDR[MAC_ADDR_LEN] = {0x1,  0x00, 0x00, 0x00, 0x00, 0x00};
-UCHAR BROADCAST_ADDR[MAC_ADDR_LEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
-UCHAR ZERO_MAC_ADDR[MAC_ADDR_LEN]  = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
-
-// e.g. RssiSafeLevelForTxRate[RATE_36]" means if the current RSSI is greater than
-//		this value, then it's quaranteed capable of operating in 36 mbps TX rate in
-//		clean environment.
-//								  TxRate: 1   2   5.5	11	 6	  9    12	18	 24   36   48	54	 72  100
-CHAR RssiSafeLevelForTxRate[] ={  -92, -91, -90, -87, -88, -86, -85, -83, -81, -78, -72, -71, -40, -40 };
-
-UCHAR  RateIdToMbps[]	 = { 1, 2, 5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 72, 100};
-USHORT RateIdTo500Kbps[] = { 2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108, 144, 200};
-
-UCHAR  SsidIe	 = IE_SSID;
-UCHAR  SupRateIe = IE_SUPP_RATES;
-UCHAR  ExtRateIe = IE_EXT_SUPP_RATES;
-#ifdef DOT11_N_SUPPORT
-UCHAR  HtCapIe = IE_HT_CAP;
-UCHAR  AddHtInfoIe = IE_ADD_HT;
-UCHAR  NewExtChanIe = IE_SECONDARY_CH_OFFSET;
-#ifdef DOT11N_DRAFT3
-UCHAR  ExtHtCapIe = IE_EXT_CAPABILITY;
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
-UCHAR  ErpIe	 = IE_ERP;
-UCHAR  DsIe 	 = IE_DS_PARM;
-UCHAR  TimIe	 = IE_TIM;
-UCHAR  WpaIe	 = IE_WPA;
-UCHAR  Wpa2Ie	 = IE_WPA2;
-UCHAR  IbssIe	 = IE_IBSS_PARM;
-UCHAR  Ccx2Ie	 = IE_CCX_V2;
-UCHAR  WapiIe	 = IE_WAPI;
-
-extern UCHAR	WPA_OUI[];
-
-UCHAR	SES_OUI[] = {0x00, 0x90, 0x4c};
-
-UCHAR	ZeroSsid[32] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
-
-// Reset the RFIC setting to new series
-RTMP_RF_REGS RF2850RegTable[] = {
-//		ch	 R1 		 R2 		 R3(TX0~4=0) R4
-		{1,  0x98402ecc, 0x984c0786, 0x9816b455, 0x9800510b},
-		{2,  0x98402ecc, 0x984c0786, 0x98168a55, 0x9800519f},
-		{3,  0x98402ecc, 0x984c078a, 0x98168a55, 0x9800518b},
-		{4,  0x98402ecc, 0x984c078a, 0x98168a55, 0x9800519f},
-		{5,  0x98402ecc, 0x984c078e, 0x98168a55, 0x9800518b},
-		{6,  0x98402ecc, 0x984c078e, 0x98168a55, 0x9800519f},
-		{7,  0x98402ecc, 0x984c0792, 0x98168a55, 0x9800518b},
-		{8,  0x98402ecc, 0x984c0792, 0x98168a55, 0x9800519f},
-		{9,  0x98402ecc, 0x984c0796, 0x98168a55, 0x9800518b},
-		{10, 0x98402ecc, 0x984c0796, 0x98168a55, 0x9800519f},
-		{11, 0x98402ecc, 0x984c079a, 0x98168a55, 0x9800518b},
-		{12, 0x98402ecc, 0x984c079a, 0x98168a55, 0x9800519f},
-		{13, 0x98402ecc, 0x984c079e, 0x98168a55, 0x9800518b},
-		{14, 0x98402ecc, 0x984c07a2, 0x98168a55, 0x98005193},
-
-		// 802.11 UNI / HyperLan 2
-		{36, 0x98402ecc, 0x984c099a, 0x98158a55, 0x980ed1a3},
-		{38, 0x98402ecc, 0x984c099e, 0x98158a55, 0x980ed193},
-		{40, 0x98402ec8, 0x984c0682, 0x98158a55, 0x980ed183},
-		{44, 0x98402ec8, 0x984c0682, 0x98158a55, 0x980ed1a3},
-		{46, 0x98402ec8, 0x984c0686, 0x98158a55, 0x980ed18b},
-		{48, 0x98402ec8, 0x984c0686, 0x98158a55, 0x980ed19b},
-		{52, 0x98402ec8, 0x984c068a, 0x98158a55, 0x980ed193},
-		{54, 0x98402ec8, 0x984c068a, 0x98158a55, 0x980ed1a3},
-		{56, 0x98402ec8, 0x984c068e, 0x98158a55, 0x980ed18b},
-		{60, 0x98402ec8, 0x984c0692, 0x98158a55, 0x980ed183},
-		{62, 0x98402ec8, 0x984c0692, 0x98158a55, 0x980ed193},
-		{64, 0x98402ec8, 0x984c0692, 0x98158a55, 0x980ed1a3}, // Plugfest#4, Day4, change RFR3 left4th 9->5.
-
-		// 802.11 HyperLan 2
-		{100, 0x98402ec8, 0x984c06b2, 0x98178a55, 0x980ed783},
-
-		// 2008.04.30 modified
-		// The system team has AN to improve the EVM value
-		// for channel 102 to 108 for the RT2850/RT2750 dual band solution.
-		{102, 0x98402ec8, 0x985c06b2, 0x98578a55, 0x980ed793},
-		{104, 0x98402ec8, 0x985c06b2, 0x98578a55, 0x980ed1a3},
-		{108, 0x98402ecc, 0x985c0a32, 0x98578a55, 0x980ed193},
-
-		{110, 0x98402ecc, 0x984c0a36, 0x98178a55, 0x980ed183},
-		{112, 0x98402ecc, 0x984c0a36, 0x98178a55, 0x980ed19b},
-		{116, 0x98402ecc, 0x984c0a3a, 0x98178a55, 0x980ed1a3},
-		{118, 0x98402ecc, 0x984c0a3e, 0x98178a55, 0x980ed193},
-		{120, 0x98402ec4, 0x984c0382, 0x98178a55, 0x980ed183},
-		{124, 0x98402ec4, 0x984c0382, 0x98178a55, 0x980ed193},
-		{126, 0x98402ec4, 0x984c0382, 0x98178a55, 0x980ed15b}, // 0x980ed1bb->0x980ed15b required by Rory 20070927
-		{128, 0x98402ec4, 0x984c0382, 0x98178a55, 0x980ed1a3},
-		{132, 0x98402ec4, 0x984c0386, 0x98178a55, 0x980ed18b},
-		{134, 0x98402ec4, 0x984c0386, 0x98178a55, 0x980ed193},
-		{136, 0x98402ec4, 0x984c0386, 0x98178a55, 0x980ed19b},
-		{140, 0x98402ec4, 0x984c038a, 0x98178a55, 0x980ed183},
-
-		// 802.11 UNII
-		{149, 0x98402ec4, 0x984c038a, 0x98178a55, 0x980ed1a7},
-		{151, 0x98402ec4, 0x984c038e, 0x98178a55, 0x980ed187},
-		{153, 0x98402ec4, 0x984c038e, 0x98178a55, 0x980ed18f},
-		{157, 0x98402ec4, 0x984c038e, 0x98178a55, 0x980ed19f},
-		{159, 0x98402ec4, 0x984c038e, 0x98178a55, 0x980ed1a7},
-		{161, 0x98402ec4, 0x984c0392, 0x98178a55, 0x980ed187},
-		{165, 0x98402ec4, 0x984c0392, 0x98178a55, 0x980ed197},
-
-		// Japan
-		{184, 0x95002ccc, 0x9500491e, 0x9509be55, 0x950c0a0b},
-		{188, 0x95002ccc, 0x95004922, 0x9509be55, 0x950c0a13},
-		{192, 0x95002ccc, 0x95004926, 0x9509be55, 0x950c0a1b},
-		{196, 0x95002ccc, 0x9500492a, 0x9509be55, 0x950c0a23},
-		{208, 0x95002ccc, 0x9500493a, 0x9509be55, 0x950c0a13},
-		{212, 0x95002ccc, 0x9500493e, 0x9509be55, 0x950c0a1b},
-		{216, 0x95002ccc, 0x95004982, 0x9509be55, 0x950c0a23},
-
-		// still lack of MMAC(Japan) ch 34,38,42,46
-};
-UCHAR	NUM_OF_2850_CHNL = (sizeof(RF2850RegTable) / sizeof(RTMP_RF_REGS));
-
-FREQUENCY_ITEM FreqItems3020[] =
-{
-	/**************************************************/
-	// ISM : 2.4 to 2.483 GHz                         //
-	/**************************************************/
-	// 11g
-	/**************************************************/
-	//-CH---N-------R---K-----------
-	{1,    241,  2,  2},
-	{2,    241,	 2,  7},
-	{3,    242,	 2,  2},
-	{4,    242,	 2,  7},
-	{5,    243,	 2,  2},
-	{6,    243,	 2,  7},
-	{7,    244,	 2,  2},
-	{8,    244,	 2,  7},
-	{9,    245,	 2,  2},
-	{10,   245,	 2,  7},
-	{11,   246,	 2,  2},
-	{12,   246,	 2,  7},
-	{13,   247,	 2,  2},
-	{14,   248,	 2,  4},
-};
-#define	NUM_OF_3020_CHNL	(sizeof(FreqItems3020) / sizeof(FREQUENCY_ITEM))
-
-/*
-	==========================================================================
-	Description:
-		initialize the MLME task and its data structure (queue, spinlock,
-		timer, state machines).
-
-	IRQL = PASSIVE_LEVEL
-
-	Return:
-		always return NDIS_STATUS_SUCCESS
-
-	==========================================================================
-*/
-NDIS_STATUS MlmeInit(
-	IN PRTMP_ADAPTER pAd)
-{
-	NDIS_STATUS Status = NDIS_STATUS_SUCCESS;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("--> MLME Initialize\n"));
-
-	do
-	{
-		Status = MlmeQueueInit(&pAd->Mlme.Queue);
-		if(Status != NDIS_STATUS_SUCCESS)
-			break;
-
-		pAd->Mlme.bRunning = FALSE;
-		NdisAllocateSpinLock(&pAd->Mlme.TaskLock);
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			BssTableInit(&pAd->ScanTab);
-
-			// init STA state machines
-			AssocStateMachineInit(pAd, &pAd->Mlme.AssocMachine, pAd->Mlme.AssocFunc);
-			AuthStateMachineInit(pAd, &pAd->Mlme.AuthMachine, pAd->Mlme.AuthFunc);
-			AuthRspStateMachineInit(pAd, &pAd->Mlme.AuthRspMachine, pAd->Mlme.AuthRspFunc);
-			SyncStateMachineInit(pAd, &pAd->Mlme.SyncMachine, pAd->Mlme.SyncFunc);
-			WpaPskStateMachineInit(pAd, &pAd->Mlme.WpaPskMachine, pAd->Mlme.WpaPskFunc);
-			AironetStateMachineInit(pAd, &pAd->Mlme.AironetMachine, pAd->Mlme.AironetFunc);
-
-#ifdef QOS_DLS_SUPPORT
-			DlsStateMachineInit(pAd, &pAd->Mlme.DlsMachine, pAd->Mlme.DlsFunc);
-#endif // QOS_DLS_SUPPORT //
-
-
-			// Since we are using switch/case to implement it, the init is different from the above
-			// state machine init
-			MlmeCntlInit(pAd, &pAd->Mlme.CntlMachine, NULL);
-		}
-#endif // CONFIG_STA_SUPPORT //
-
-
-
-		ActionStateMachineInit(pAd, &pAd->Mlme.ActMachine, pAd->Mlme.ActFunc);
-
-		// Init mlme periodic timer
-		RTMPInitTimer(pAd, &pAd->Mlme.PeriodicTimer, GET_TIMER_FUNCTION(MlmePeriodicExec), pAd, TRUE);
-
-		// Set mlme periodic timer
-		RTMPSetTimer(&pAd->Mlme.PeriodicTimer, MLME_TASK_EXEC_INTV);
-
-		// software-based RX Antenna diversity
-		RTMPInitTimer(pAd, &pAd->Mlme.RxAntEvalTimer, GET_TIMER_FUNCTION(AsicRxAntEvalTimeout), pAd, FALSE);
-
-	} while (FALSE);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<-- MLME Initialize\n"));
-
-	return Status;
-}
-
-/*
-	==========================================================================
-	Description:
-		main loop of the MLME
-	Pre:
-		Mlme has to be initialized, and there are something inside the queue
-	Note:
-		This function is invoked from MPSetInformation and MPReceive;
-		This task guarantee only one MlmeHandler will run.
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID MlmeHandler(
-	IN PRTMP_ADAPTER pAd)
-{
-	MLME_QUEUE_ELEM 	   *Elem = NULL;
-#ifdef APCLI_SUPPORT
-	SHORT apcliIfIndex;
-#endif
-
-	// Only accept MLME and Frame from peer side, no other (control/data) frame should
-	// get into this state machine
-
-	NdisAcquireSpinLock(&pAd->Mlme.TaskLock);
-	if(pAd->Mlme.bRunning)
-	{
-		NdisReleaseSpinLock(&pAd->Mlme.TaskLock);
-		return;
-	}
-	else
-	{
-		pAd->Mlme.bRunning = TRUE;
-	}
-	NdisReleaseSpinLock(&pAd->Mlme.TaskLock);
-
-	while (!MlmeQueueEmpty(&pAd->Mlme.Queue))
-	{
-		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_MLME_RESET_IN_PROGRESS) ||
-			RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS) ||
-			RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("Device Halted or Removed or MlmeRest, exit MlmeHandler! (queue num = %ld)\n", pAd->Mlme.Queue.Num));
-			break;
-		}
-
-#ifdef RALINK_ATE
-		if(ATE_ON(pAd))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now in MlmeHandler\n"));
-			break;
-		}
-#endif // RALINK_ATE //
-
-		//From message type, determine which state machine I should drive
-		if (MlmeDequeue(&pAd->Mlme.Queue, &Elem))
-		{
-#ifdef RT2870
-			if (Elem->MsgType == MT2_RESET_CONF)
-			{
-				DBGPRINT_RAW(RT_DEBUG_TRACE, ("!!! reset MLME state machine !!!\n"));
-				MlmeRestartStateMachine(pAd);
-				Elem->Occupied = FALSE;
-				Elem->MsgLen = 0;
-				continue;
-			}
-#endif // RT2870 //
-
-			// if dequeue success
-			switch (Elem->Machine)
-			{
-				// STA state machines
-#ifdef	CONFIG_STA_SUPPORT
-				case ASSOC_STATE_MACHINE:
-					StateMachinePerformAction(pAd, &pAd->Mlme.AssocMachine, Elem);
-					break;
-				case AUTH_STATE_MACHINE:
-					StateMachinePerformAction(pAd, &pAd->Mlme.AuthMachine, Elem);
-					break;
-				case AUTH_RSP_STATE_MACHINE:
-					StateMachinePerformAction(pAd, &pAd->Mlme.AuthRspMachine, Elem);
-					break;
-				case SYNC_STATE_MACHINE:
-					StateMachinePerformAction(pAd, &pAd->Mlme.SyncMachine, Elem);
-					break;
-				case MLME_CNTL_STATE_MACHINE:
-					MlmeCntlMachinePerformAction(pAd, &pAd->Mlme.CntlMachine, Elem);
-					break;
-				case WPA_PSK_STATE_MACHINE:
-					StateMachinePerformAction(pAd, &pAd->Mlme.WpaPskMachine, Elem);
-					break;
-#ifdef LEAP_SUPPORT
-				case LEAP_STATE_MACHINE:
-					LeapMachinePerformAction(pAd, &pAd->Mlme.LeapMachine, Elem);
-					break;
-#endif
-				case AIRONET_STATE_MACHINE:
-					StateMachinePerformAction(pAd, &pAd->Mlme.AironetMachine, Elem);
-					break;
-
-#ifdef QOS_DLS_SUPPORT
-				case DLS_STATE_MACHINE:
-					StateMachinePerformAction(pAd, &pAd->Mlme.DlsMachine, Elem);
-					break;
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
-				case ACTION_STATE_MACHINE:
-					StateMachinePerformAction(pAd, &pAd->Mlme.ActMachine, Elem);
-					break;
-
-
-
-
-				default:
-					DBGPRINT(RT_DEBUG_TRACE, ("ERROR: Illegal machine %ld in MlmeHandler()\n", Elem->Machine));
-					break;
-			} // end of switch
-
-			// free MLME element
-			Elem->Occupied = FALSE;
-			Elem->MsgLen = 0;
-
-		}
-		else {
-			DBGPRINT_ERR(("MlmeHandler: MlmeQueue empty\n"));
-		}
-	}
-
-	NdisAcquireSpinLock(&pAd->Mlme.TaskLock);
-	pAd->Mlme.bRunning = FALSE;
-	NdisReleaseSpinLock(&pAd->Mlme.TaskLock);
-}
-
-/*
-	==========================================================================
-	Description:
-		Destructor of MLME (Destroy queue, state machine, spin lock and timer)
-	Parameters:
-		Adapter - NIC Adapter pointer
-	Post:
-		The MLME task will no longer work properly
-
-	IRQL = PASSIVE_LEVEL
-
-	==========================================================================
- */
-VOID MlmeHalt(
-	IN PRTMP_ADAPTER pAd)
-{
-	BOOLEAN 	  Cancelled;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("==> MlmeHalt\n"));
-
-	if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
-	{
-		// disable BEACON generation and other BEACON related hardware timers
-		AsicDisableSync(pAd);
-	}
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-#ifdef QOS_DLS_SUPPORT
-		UCHAR		i;
-#endif // QOS_DLS_SUPPORT //
-		// Cancel pending timers
-		RTMPCancelTimer(&pAd->MlmeAux.AssocTimer,		&Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.ReassocTimer,		&Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.DisassocTimer,	&Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.AuthTimer,		&Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer,		&Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.ScanTimer,		&Cancelled);
-
-#ifdef QOS_DLS_SUPPORT
-		for (i=0; i<MAX_NUM_OF_DLS_ENTRY; i++)
-		{
-			RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &Cancelled);
-		}
-#endif // QOS_DLS_SUPPORT //
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	RTMPCancelTimer(&pAd->Mlme.PeriodicTimer,		&Cancelled);
-	RTMPCancelTimer(&pAd->Mlme.RxAntEvalTimer,		&Cancelled);
-
-
-
-	if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
-	{
-		// Set LED
-		RTMPSetLED(pAd, LED_HALT);
-        RTMPSetSignalLED(pAd, -100);	// Force signal strength Led to be turned off, firmware is not done it.
-#ifdef RT2870
-        {
-            LED_CFG_STRUC LedCfg;
-            RTMP_IO_READ32(pAd, LED_CFG, &LedCfg.word);
-            LedCfg.field.LedPolar = 0;
-            LedCfg.field.RLedMode = 0;
-            LedCfg.field.GLedMode = 0;
-            LedCfg.field.YLedMode = 0;
-            RTMP_IO_WRITE32(pAd, LED_CFG, LedCfg.word);
-        }
-#endif // RT2870 //
-	}
-
-	RTMPusecDelay(5000);    //  5 msec to gurantee Ant Diversity timer canceled
-
-	MlmeQueueDestroy(&pAd->Mlme.Queue);
-	NdisFreeSpinLock(&pAd->Mlme.TaskLock);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<== MlmeHalt\n"));
-}
-
-VOID MlmeResetRalinkCounters(
-	IN  PRTMP_ADAPTER   pAd)
-{
-	pAd->RalinkCounters.LastOneSecRxOkDataCnt = pAd->RalinkCounters.OneSecRxOkDataCnt;
-	// clear all OneSecxxx counters.
-	pAd->RalinkCounters.OneSecBeaconSentCnt = 0;
-	pAd->RalinkCounters.OneSecFalseCCACnt = 0;
-	pAd->RalinkCounters.OneSecRxFcsErrCnt = 0;
-	pAd->RalinkCounters.OneSecRxOkCnt = 0;
-	pAd->RalinkCounters.OneSecTxFailCount = 0;
-	pAd->RalinkCounters.OneSecTxNoRetryOkCount = 0;
-	pAd->RalinkCounters.OneSecTxRetryOkCount = 0;
-	pAd->RalinkCounters.OneSecRxOkDataCnt = 0;
-
-	// TODO: for debug only. to be removed
-	pAd->RalinkCounters.OneSecOsTxCount[QID_AC_BE] = 0;
-	pAd->RalinkCounters.OneSecOsTxCount[QID_AC_BK] = 0;
-	pAd->RalinkCounters.OneSecOsTxCount[QID_AC_VI] = 0;
-	pAd->RalinkCounters.OneSecOsTxCount[QID_AC_VO] = 0;
-	pAd->RalinkCounters.OneSecDmaDoneCount[QID_AC_BE] = 0;
-	pAd->RalinkCounters.OneSecDmaDoneCount[QID_AC_BK] = 0;
-	pAd->RalinkCounters.OneSecDmaDoneCount[QID_AC_VI] = 0;
-	pAd->RalinkCounters.OneSecDmaDoneCount[QID_AC_VO] = 0;
-	pAd->RalinkCounters.OneSecTxDoneCount = 0;
-	pAd->RalinkCounters.OneSecRxCount = 0;
-	pAd->RalinkCounters.OneSecTxAggregationCount = 0;
-	pAd->RalinkCounters.OneSecRxAggregationCount = 0;
-
-	return;
-}
-
-unsigned long rx_AMSDU;
-unsigned long rx_Total;
-
-/*
-	==========================================================================
-	Description:
-		This routine is executed periodically to -
-		1. Decide if it's a right time to turn on PwrMgmt bit of all
-		   outgoiing frames
-		2. Calculate ChannelQuality based on statistics of the last
-		   period, so that TX rate won't toggling very frequently between a
-		   successful TX and a failed TX.
-		3. If the calculated ChannelQuality indicated current connection not
-		   healthy, then a ROAMing attempt is tried here.
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-#define ADHOC_BEACON_LOST_TIME		(8*OS_HZ)  // 8 sec
-VOID MlmePeriodicExec(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3)
-{
-	ULONG			TxTotalCnt;
-	PRTMP_ADAPTER	pAd = (RTMP_ADAPTER *)FunctionContext;
-
-	// Do nothing if the driver is starting halt state.
-	// This might happen when timer already been fired before cancel timer with mlmehalt
-	if ((RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_HALT_IN_PROGRESS |
-								fRTMP_ADAPTER_RADIO_OFF |
-								fRTMP_ADAPTER_RADIO_MEASUREMENT |
-								fRTMP_ADAPTER_RESET_IN_PROGRESS))))
-		return;
-
-	RT28XX_MLME_PRE_SANITY_CHECK(pAd);
-
-#ifdef RALINK_ATE
-	/* Do not show RSSI until "Normal 1 second Mlme PeriodicExec". */
-	if (ATE_ON(pAd))
-	{
-		if (pAd->Mlme.PeriodicRound % MLME_TASK_EXEC_MULTIPLE != (MLME_TASK_EXEC_MULTIPLE - 1))
-	{
-			pAd->Mlme.PeriodicRound ++;
-			return;
-		}
-	}
-#endif // RALINK_ATE //
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// Do nothing if monitor mode is on
-		if (MONITOR_ON(pAd))
-			return;
-
-		if (pAd->Mlme.PeriodicRound & 0x1)
-		{
-			// This is the fix for wifi 11n extension channel overlapping test case.  for 2860D
-			if (((pAd->MACVersion & 0xffff) == 0x0101) &&
-				(STA_TGN_WIFI_ON(pAd)) &&
-				(pAd->CommonCfg.IOTestParm.bToggle == FALSE))
-
-				{
-					RTMP_IO_WRITE32(pAd, TXOP_CTRL_CFG, 0x24Bf);
-					pAd->CommonCfg.IOTestParm.bToggle = TRUE;
-				}
-				else if ((STA_TGN_WIFI_ON(pAd)) &&
-						((pAd->MACVersion & 0xffff) == 0x0101))
-				{
-					RTMP_IO_WRITE32(pAd, TXOP_CTRL_CFG, 0x243f);
-					pAd->CommonCfg.IOTestParm.bToggle = FALSE;
-				}
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	pAd->bUpdateBcnCntDone = FALSE;
-
-//	RECBATimerTimeout(SystemSpecific1,FunctionContext,SystemSpecific2,SystemSpecific3);
-	pAd->Mlme.PeriodicRound ++;
-
-	// execute every 500ms
-	if ((pAd->Mlme.PeriodicRound % 5 == 0) && RTMPAutoRateSwitchCheck(pAd)/*(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED))*/)
-	{
-#ifdef CONFIG_STA_SUPPORT
-		// perform dynamic tx rate switching based on past TX history
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
-					)
-				&& (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)))
-				MlmeDynamicTxRateSwitching(pAd);
-		}
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-	// Normal 1 second Mlme PeriodicExec.
-	if (pAd->Mlme.PeriodicRound %MLME_TASK_EXEC_MULTIPLE == 0)
-	{
-                pAd->Mlme.OneSecPeriodicRound ++;
-
-#ifdef RALINK_ATE
-    	if (ATE_ON(pAd))
-    	{
-			/* request from Baron : move this routine from later to here */
-			/* for showing Rx error count in ATE RXFRAME */
-            NICUpdateRawCounters(pAd);
-			if (pAd->ate.bRxFer == 1)
-			{
-				pAd->ate.RxTotalCnt += pAd->ate.RxCntPerSec;
-			    ate_print(KERN_EMERG "MlmePeriodicExec: Rx packet cnt = %d/%d\n", pAd->ate.RxCntPerSec, pAd->ate.RxTotalCnt);
-				pAd->ate.RxCntPerSec = 0;
-
-				if (pAd->ate.RxAntennaSel == 0)
-					ate_print(KERN_EMERG "MlmePeriodicExec: Rx AvgRssi0=%d, AvgRssi1=%d, AvgRssi2=%d\n\n",
-						pAd->ate.AvgRssi0, pAd->ate.AvgRssi1, pAd->ate.AvgRssi2);
-				else
-					ate_print(KERN_EMERG "MlmePeriodicExec: Rx AvgRssi=%d\n\n", pAd->ate.AvgRssi0);
-			}
-			MlmeResetRalinkCounters(pAd);
-			return;
-    	}
-#endif // RALINK_ATE //
-
-
-		if (rx_Total)
-		{
-
-			// reset counters
-			rx_AMSDU = 0;
-			rx_Total = 0;
-		}
-
-		//ORIBATimerTimeout(pAd);
-
-		// Media status changed, report to NDIS
-		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE))
-		{
-			RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE);
-			if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
-			{
-				pAd->IndicateMediaState = NdisMediaStateConnected;
-				RTMP_IndicateMediaState(pAd);
-
-			}
-			else
-			{
-				pAd->IndicateMediaState = NdisMediaStateDisconnected;
-				RTMP_IndicateMediaState(pAd);
-			}
-		}
-
-		NdisGetSystemUpTime(&pAd->Mlme.Now32);
-
-		// add the most up-to-date h/w raw counters into software variable, so that
-		// the dynamic tuning mechanism below are based on most up-to-date information
-		NICUpdateRawCounters(pAd);
-
-#ifdef RT2870
-		RT2870_WatchDog(pAd);
-#endif // RT2870 //
-
-#ifdef DOT11_N_SUPPORT
-   		// Need statistics after read counter. So put after NICUpdateRawCounters
-		ORIBATimerTimeout(pAd);
-#endif // DOT11_N_SUPPORT //
-
-		// if MGMT RING is full more than twice within 1 second, we consider there's
-		// a hardware problem stucking the TX path. In this case, try a hardware reset
-		// to recover the system
-	//	if (pAd->RalinkCounters.MgmtRingFullCount >= 2)
-	//		RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HARDWARE_ERROR);
-	//	else
-	//		pAd->RalinkCounters.MgmtRingFullCount = 0;
-
-		// The time period for checking antenna is according to traffic
-		if (pAd->Mlme.bEnableAutoAntennaCheck)
-		{
-			TxTotalCnt = pAd->RalinkCounters.OneSecTxNoRetryOkCount +
-							 pAd->RalinkCounters.OneSecTxRetryOkCount +
-							 pAd->RalinkCounters.OneSecTxFailCount;
-
-			if (TxTotalCnt > 50)
-			{
-				if (pAd->Mlme.OneSecPeriodicRound % 10 == 0)
-				{
-					AsicEvaluateRxAnt(pAd);
-				}
-			}
-			else
-			{
-				if (pAd->Mlme.OneSecPeriodicRound % 3 == 0)
-				{
-					AsicEvaluateRxAnt(pAd);
-				}
-			}
-		}
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			STAMlmePeriodicExec(pAd);
-#endif // CONFIG_STA_SUPPORT //
-
-		MlmeResetRalinkCounters(pAd);
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			{
-				// When Adhoc beacon is enabled and RTS/CTS is enabled, there is a chance that hardware MAC FSM will run into a deadlock
-				// and sending CTS-to-self over and over.
-				// Software Patch Solution:
-				// 1. Polling debug state register 0x10F4 every one second.
-				// 2. If in 0x10F4 the ((bit29==1) && (bit7==1)) OR ((bit29==1) && (bit5==1)), it means the deadlock has occurred.
-				// 3. If the deadlock occurred, reset MAC/BBP by setting 0x1004 to 0x0001 for a while then setting it back to 0x000C again.
-
-				UINT32	MacReg = 0;
-
-				RTMP_IO_READ32(pAd, 0x10F4, &MacReg);
-				if (((MacReg & 0x20000000) && (MacReg & 0x80)) || ((MacReg & 0x20000000) && (MacReg & 0x20)))
-				{
-					RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x1);
-					RTMPusecDelay(1);
-					RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0xC);
-
-					DBGPRINT(RT_DEBUG_WARN,("Warning, MAC specific condition occurs \n"));
-				}
-			}
-		}
-#endif // CONFIG_STA_SUPPORT //
-
-		RT28XX_MLME_HANDLER(pAd);
-	}
-
-
-	pAd->bUpdateBcnCntDone = FALSE;
-}
-
-#ifdef CONFIG_STA_SUPPORT
-VOID STAMlmePeriodicExec(
-	PRTMP_ADAPTER pAd)
-{
-	ULONG	TxTotalCnt;
-	int 	i;
-
-//
-// We return here in ATE mode, because the statistics
-// that ATE needs are not collected via this routine.
-//
-#ifdef RALINK_ATE
-	// It is supposed that we will never reach here in ATE mode.
-	ASSERT(!(ATE_ON(pAd)));
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-    if (pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_DISABLE)
-#endif // WPA_SUPPLICANT_SUPPORT //
-    {
-    	// WPA MIC error should block association attempt for 60 seconds
-    	if (pAd->StaCfg.bBlockAssoc && (pAd->StaCfg.LastMicErrorTime + (60 * OS_HZ) < pAd->Mlme.Now32))
-    		pAd->StaCfg.bBlockAssoc = FALSE;
-    }
-
-    if ((pAd->PreMediaState != pAd->IndicateMediaState) && (pAd->CommonCfg.bWirelessEvent))
-	{
-		if (pAd->IndicateMediaState == NdisMediaStateConnected)
-		{
-			RTMPSendWirelessEvent(pAd, IW_STA_LINKUP_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-		}
-		pAd->PreMediaState = pAd->IndicateMediaState;
-	}
-
-
-
-
-   	AsicStaBbpTuning(pAd);
-
-	TxTotalCnt = pAd->RalinkCounters.OneSecTxNoRetryOkCount +
-					 pAd->RalinkCounters.OneSecTxRetryOkCount +
-					 pAd->RalinkCounters.OneSecTxFailCount;
-
-	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
-	{
-		// update channel quality for Roaming and UI LinkQuality display
-		MlmeCalculateChannelQuality(pAd, pAd->Mlme.Now32);
-	}
-
-	// must be AFTER MlmeDynamicTxRateSwitching() because it needs to know if
-	// Radio is currently in noisy environment
-	if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-		AsicAdjustTxPower(pAd);
-
-	if (INFRA_ON(pAd))
-	{
-#ifdef QOS_DLS_SUPPORT
-		// Check DLS time out, then tear down those session
-		RTMPCheckDLSTimeOut(pAd);
-#endif // QOS_DLS_SUPPORT //
-
-		// Is PSM bit consistent with user power management policy?
-		// This is the only place that will set PSM bit ON.
-		if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
-		MlmeCheckPsmChange(pAd, pAd->Mlme.Now32);
-
-		pAd->RalinkCounters.LastOneSecTotalTxCount = TxTotalCnt;
-
-		if ((pAd->StaCfg.LastBeaconRxTime + 1*OS_HZ < pAd->Mlme.Now32) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) &&
-			((TxTotalCnt + pAd->RalinkCounters.OneSecRxOkCnt < 600)))
-		{
-			RTMPSetAGCInitValue(pAd, BW_20);
-			DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - No BEACON. restore R66 to the low bound(%d) \n", (0x2E + GET_LNA_GAIN(pAd))));
-		}
-
-        //if ((pAd->RalinkCounters.OneSecTxNoRetryOkCount == 0) &&
-        //    (pAd->RalinkCounters.OneSecTxRetryOkCount == 0))
-        {
-    		if (pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable)
-    		{
-    		    // When APSD is enabled, the period changes as 20 sec
-    			if ((pAd->Mlme.OneSecPeriodicRound % 20) == 8)
-    				RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, TRUE);
-    		}
-    		else
-    		{
-    		    // Send out a NULL frame every 10 sec to inform AP that STA is still alive (Avoid being age out)
-    			if ((pAd->Mlme.OneSecPeriodicRound % 10) == 8)
-                {
-                    if (pAd->CommonCfg.bWmmCapable)
-    					RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, TRUE);
-                    else
-						RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, FALSE);
-                }
-    		}
-        }
-
-		if (CQI_IS_DEAD(pAd->Mlme.ChannelQuality))
-			{
-			DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - No BEACON. Dead CQI. Auto Recovery attempt #%ld\n", pAd->RalinkCounters.BadCQIAutoRecoveryCount));
-			pAd->StaCfg.CCXAdjacentAPReportFlag = TRUE;
-			pAd->StaCfg.CCXAdjacentAPLinkDownTime = pAd->StaCfg.LastBeaconRxTime;
-
-			// Lost AP, send disconnect & link down event
-			LinkDown(pAd, FALSE);
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-            if (pAd->StaCfg.WpaSupplicantUP)
-			{
-                union iwreq_data    wrqu;
-                //send disassociate event to wpa_supplicant
-                memset(&wrqu, 0, sizeof(wrqu));
-                wrqu.data.flags = RT_DISASSOC_EVENT_FLAG;
-                wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL);
-            }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-            {
-                union iwreq_data    wrqu;
-                memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN);
-                wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
-            }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-
-			// RTMPPatchMacBbpBug(pAd);
-			MlmeAutoReconnectLastSSID(pAd);
-		}
-		else if (CQI_IS_BAD(pAd->Mlme.ChannelQuality))
-		{
-			pAd->RalinkCounters.BadCQIAutoRecoveryCount ++;
-			DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - Bad CQI. Auto Recovery attempt #%ld\n", pAd->RalinkCounters.BadCQIAutoRecoveryCount));
-			MlmeAutoReconnectLastSSID(pAd);
-		}
-
-		// Add auto seamless roaming
-		if (pAd->StaCfg.bFastRoaming)
-		{
-			SHORT	dBmToRoam = (SHORT)pAd->StaCfg.dBmToRoam;
-
-			DBGPRINT(RT_DEBUG_TRACE, ("Rssi=%d, dBmToRoam=%d\n", RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.LastRssi0, pAd->StaCfg.RssiSample.LastRssi1, pAd->StaCfg.RssiSample.LastRssi2), (CHAR)dBmToRoam));
-
-			if (RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.LastRssi0, pAd->StaCfg.RssiSample.LastRssi1, pAd->StaCfg.RssiSample.LastRssi2) <= (CHAR)dBmToRoam)
-			{
-				MlmeCheckForFastRoaming(pAd, pAd->Mlme.Now32);
-			}
-		}
-	}
-	else if (ADHOC_ON(pAd))
-	{
-		//radar detect
-		if ((pAd->CommonCfg.Channel > 14)
-			&& (pAd->CommonCfg.bIEEE80211H == 1)
-			&& RadarChannelCheck(pAd, pAd->CommonCfg.Channel))
-		{
-			RadarDetectPeriodic(pAd);
-		}
-
-		// If all peers leave, and this STA becomes the last one in this IBSS, then change MediaState
-		// to DISCONNECTED. But still holding this IBSS (i.e. sending BEACON) so that other STAs can
-		// join later.
-		if ((pAd->StaCfg.LastBeaconRxTime + ADHOC_BEACON_LOST_TIME < pAd->Mlme.Now32) &&
-			OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
-		{
-			MLME_START_REQ_STRUCT     StartReq;
-
-			DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - excessive BEACON lost, last STA in this IBSS, MediaState=Disconnected\n"));
-			LinkDown(pAd, FALSE);
-
-			StartParmFill(pAd, &StartReq, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen);
-			MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_START_REQ, sizeof(MLME_START_REQ_STRUCT), &StartReq);
-			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_START;
-		}
-
-		for (i = 1; i < MAX_LEN_OF_MAC_TABLE; i++)
-		{
-			MAC_TABLE_ENTRY *pEntry = &pAd->MacTab.Content[i];
-
-			if (pEntry->ValidAsCLI == FALSE)
-				continue;
-
-			if (pEntry->LastBeaconRxTime + ADHOC_BEACON_LOST_TIME < pAd->Mlme.Now32)
-				MacTableDeleteEntry(pAd, pEntry->Aid, pEntry->Addr);
-		}
-	}
-	else // no INFRA nor ADHOC connection
-	{
-
-		if (pAd->StaCfg.bScanReqIsFromWebUI &&
-            ((pAd->StaCfg.LastScanTime + 30 * OS_HZ) > pAd->Mlme.Now32))
-			goto SKIP_AUTO_SCAN_CONN;
-        else
-            pAd->StaCfg.bScanReqIsFromWebUI = FALSE;
-
-		if ((pAd->StaCfg.bAutoReconnect == TRUE)
-			&& RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP)
-			&& (MlmeValidateSSID(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen) == TRUE))
-		{
-			if ((pAd->ScanTab.BssNr==0) && (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE))
-			{
-				MLME_SCAN_REQ_STRUCT	   ScanReq;
-
-				if ((pAd->StaCfg.LastScanTime + 10 * OS_HZ) < pAd->Mlme.Now32)
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("STAMlmePeriodicExec():CNTL - ScanTab.BssNr==0, start a new ACTIVE scan SSID[%s]\n", pAd->MlmeAux.AutoReconnectSsid));
-					ScanParmFill(pAd, &ScanReq, pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen, BSS_ANY, SCAN_ACTIVE);
-					MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_SCAN_REQ, sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq);
-					pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_LIST_SCAN;
-					// Reset Missed scan number
-					pAd->StaCfg.LastScanTime = pAd->Mlme.Now32;
-				}
-				else if (pAd->StaCfg.BssType == BSS_ADHOC)	// Quit the forever scan when in a very clean room
-					MlmeAutoReconnectLastSSID(pAd);
-			}
-			else if (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE)
-			{
-				if ((pAd->Mlme.OneSecPeriodicRound % 7) == 0)
-				{
-					MlmeAutoScan(pAd);
-					pAd->StaCfg.LastScanTime = pAd->Mlme.Now32;
-				}
-				else
-				{
-#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier
-					if (pAd->CommonCfg.CarrierDetect.Enable == TRUE)
-					{
-						if ((pAd->Mlme.OneSecPeriodicRound % 5) == 1)
-							MlmeAutoReconnectLastSSID(pAd);
-					}
-					else
-#endif // CARRIER_DETECTION_SUPPORT //
-						MlmeAutoReconnectLastSSID(pAd);
-				}
-			}
-		}
-	}
-
-SKIP_AUTO_SCAN_CONN:
-
-#ifdef DOT11_N_SUPPORT
-    if ((pAd->MacTab.Content[BSSID_WCID].TXBAbitmap !=0) && (pAd->MacTab.fAnyBASession == FALSE))
-	{
-		pAd->MacTab.fAnyBASession = TRUE;
-		AsicUpdateProtect(pAd, HT_FORCERTSCTS,  ALLN_SETPROTECT, FALSE, FALSE);
-	}
-	else if ((pAd->MacTab.Content[BSSID_WCID].TXBAbitmap ==0) && (pAd->MacTab.fAnyBASession == TRUE))
-	{
-		pAd->MacTab.fAnyBASession = FALSE;
-		AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode,  ALLN_SETPROTECT, FALSE, FALSE);
-	}
-#endif // DOT11_N_SUPPORT //
-
-
-#ifdef DOT11_N_SUPPORT
-#ifdef DOT11N_DRAFT3
-	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_SCAN_2040))
-		TriEventCounterMaintenance(pAd);
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
-
-	return;
-}
-
-// Link down report
-VOID LinkDownExec(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3)
-{
-
-	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;
-
-	pAd->IndicateMediaState = NdisMediaStateDisconnected;
-	RTMP_IndicateMediaState(pAd);
-    pAd->ExtraInfo = GENERAL_LINK_DOWN;
-}
-
-// IRQL = DISPATCH_LEVEL
-VOID MlmeAutoScan(
-	IN PRTMP_ADAPTER pAd)
-{
-	// check CntlMachine.CurrState to avoid collision with NDIS SetOID request
-	if (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - Driver auto scan\n"));
-		MlmeEnqueue(pAd,
-					MLME_CNTL_STATE_MACHINE,
-					OID_802_11_BSSID_LIST_SCAN,
-					0,
-					NULL);
-		RT28XX_MLME_HANDLER(pAd);
-	}
-}
-
-// IRQL = DISPATCH_LEVEL
-VOID MlmeAutoReconnectLastSSID(
-	IN PRTMP_ADAPTER pAd)
-{
-
-
-	// check CntlMachine.CurrState to avoid collision with NDIS SetOID request
-	if ((pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) &&
-		(MlmeValidateSSID(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen) == TRUE))
-	{
-		NDIS_802_11_SSID OidSsid;
-		OidSsid.SsidLength = pAd->MlmeAux.AutoReconnectSsidLen;
-		NdisMoveMemory(OidSsid.Ssid, pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
-
-		DBGPRINT(RT_DEBUG_TRACE, ("Driver auto reconnect to last OID_802_11_SSID setting - %s, len - %d\n", pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen));
-		MlmeEnqueue(pAd,
-					MLME_CNTL_STATE_MACHINE,
-					OID_802_11_SSID,
-					sizeof(NDIS_802_11_SSID),
-					&OidSsid);
-		RT28XX_MLME_HANDLER(pAd);
-	}
-}
-#endif // CONFIG_STA_SUPPORT //
-
-/*
-	==========================================================================
-	Validate SSID for connection try and rescan purpose
-	Valid SSID will have visible chars only.
-	The valid length is from 0 to 32.
-	IRQL = DISPATCH_LEVEL
-	==========================================================================
- */
-BOOLEAN MlmeValidateSSID(
-	IN PUCHAR	pSsid,
-	IN UCHAR	SsidLen)
-{
-	int	index;
-
-	if (SsidLen > MAX_LEN_OF_SSID)
-		return (FALSE);
-
-	// Check each character value
-	for (index = 0; index < SsidLen; index++)
-	{
-		if (pSsid[index] < 0x20)
-			return (FALSE);
-	}
-
-	// All checked
-	return (TRUE);
-}
-
-VOID MlmeSelectTxRateTable(
-	IN PRTMP_ADAPTER		pAd,
-	IN PMAC_TABLE_ENTRY		pEntry,
-	IN PUCHAR				*ppTable,
-	IN PUCHAR				pTableSize,
-	IN PUCHAR				pInitTxRateIdx)
-{
-	do
-	{
-		// decide the rate table for tuning
-		if (pAd->CommonCfg.TxRateTableSize > 0)
-		{
-			*ppTable = RateSwitchTable;
-			*pTableSize = RateSwitchTable[0];
-			*pInitTxRateIdx = RateSwitchTable[1];
-
-			break;
-		}
-
-#ifdef CONFIG_STA_SUPPORT
-		if ((pAd->OpMode == OPMODE_STA) && ADHOC_ON(pAd))
-		{
-#ifdef DOT11_N_SUPPORT
-			if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) &&
-				(pEntry->HTCapability.MCSSet[0] == 0xff) &&
-				((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1)))
-			{// 11N 1S Adhoc
-				*ppTable = RateSwitchTable11N1S;
-				*pTableSize = RateSwitchTable11N1S[0];
-				*pInitTxRateIdx = RateSwitchTable11N1S[1];
-
-			}
-			else if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) &&
-					(pEntry->HTCapability.MCSSet[0] == 0xff) &&
-					(pEntry->HTCapability.MCSSet[1] == 0xff) &&
-					(pAd->Antenna.field.TxPath == 2))
-			{// 11N 2S Adhoc
-				if (pAd->LatchRfRegs.Channel <= 14)
-				{
-					*ppTable = RateSwitchTable11N2S;
-					*pTableSize = RateSwitchTable11N2S[0];
-					*pInitTxRateIdx = RateSwitchTable11N2S[1];
-				}
-				else
-				{
-					*ppTable = RateSwitchTable11N2SForABand;
-					*pTableSize = RateSwitchTable11N2SForABand[0];
-					*pInitTxRateIdx = RateSwitchTable11N2SForABand[1];
-				}
-
-			}
-			else
-#endif // DOT11_N_SUPPORT //
-				if ((pEntry->RateLen == 4)
-#ifdef DOT11_N_SUPPORT
-					&& (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)
-#endif // DOT11_N_SUPPORT //
-					)
-			{
-				*ppTable = RateSwitchTable11B;
-				*pTableSize = RateSwitchTable11B[0];
-				*pInitTxRateIdx = RateSwitchTable11B[1];
-
-			}
-			else if (pAd->LatchRfRegs.Channel <= 14)
-			{
-				*ppTable = RateSwitchTable11BG;
-				*pTableSize = RateSwitchTable11BG[0];
-				*pInitTxRateIdx = RateSwitchTable11BG[1];
-
-			}
-			else
-			{
-				*ppTable = RateSwitchTable11G;
-				*pTableSize = RateSwitchTable11G[0];
-				*pInitTxRateIdx = RateSwitchTable11G[1];
-
-			}
-			break;
-		}
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef DOT11_N_SUPPORT
-		//if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 12) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) &&
-		//	((pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1)))
-		if ((pEntry->RateLen == 12) && (pEntry->HTCapability.MCSSet[0] == 0xff) &&
-			((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->CommonCfg.TxStream == 1)))
-		{// 11BGN 1S AP
-			*ppTable = RateSwitchTable11BGN1S;
-			*pTableSize = RateSwitchTable11BGN1S[0];
-			*pInitTxRateIdx = RateSwitchTable11BGN1S[1];
-
-			break;
-		}
-
-		//else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 12) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) &&
-		//	(pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0xff) && (pAd->Antenna.field.TxPath == 2))
-		if ((pEntry->RateLen == 12) && (pEntry->HTCapability.MCSSet[0] == 0xff) &&
-			(pEntry->HTCapability.MCSSet[1] == 0xff) && (pAd->CommonCfg.TxStream == 2))
-		{// 11BGN 2S AP
-			if (pAd->LatchRfRegs.Channel <= 14)
-			{
-				*ppTable = RateSwitchTable11BGN2S;
-				*pTableSize = RateSwitchTable11BGN2S[0];
-				*pInitTxRateIdx = RateSwitchTable11BGN2S[1];
-
-			}
-			else
-			{
-				*ppTable = RateSwitchTable11BGN2SForABand;
-				*pTableSize = RateSwitchTable11BGN2SForABand[0];
-				*pInitTxRateIdx = RateSwitchTable11BGN2SForABand[1];
-
-			}
-			break;
-		}
-
-		//else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) && ((pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1)))
-		if ((pEntry->HTCapability.MCSSet[0] == 0xff) && ((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->CommonCfg.TxStream == 1)))
-		{// 11N 1S AP
-			*ppTable = RateSwitchTable11N1S;
-			*pTableSize = RateSwitchTable11N1S[0];
-			*pInitTxRateIdx = RateSwitchTable11N1S[1];
-
-			break;
-		}
-
-		//else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0xff) && (pAd->Antenna.field.TxPath == 2))
-		if ((pEntry->HTCapability.MCSSet[0] == 0xff) && (pEntry->HTCapability.MCSSet[1] == 0xff) && (pAd->CommonCfg.TxStream == 2))
-		{// 11N 2S AP
-			if (pAd->LatchRfRegs.Channel <= 14)
-			{
-			*ppTable = RateSwitchTable11N2S;
-			*pTableSize = RateSwitchTable11N2S[0];
-			*pInitTxRateIdx = RateSwitchTable11N2S[1];
-            }
-			else
-			{
-				*ppTable = RateSwitchTable11N2SForABand;
-				*pTableSize = RateSwitchTable11N2SForABand[0];
-				*pInitTxRateIdx = RateSwitchTable11N2SForABand[1];
-			}
-
-			break;
-		}
-#endif // DOT11_N_SUPPORT //
-		//else if ((pAd->StaActive.SupRateLen == 4) && (pAd->StaActive.ExtRateLen == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
-		if ((pEntry->RateLen == 4)
-#ifdef DOT11_N_SUPPORT
-			&& (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)
-#endif // DOT11_N_SUPPORT //
-			)
-		{// B only AP
-			*ppTable = RateSwitchTable11B;
-			*pTableSize = RateSwitchTable11B[0];
-			*pInitTxRateIdx = RateSwitchTable11B[1];
-
-			break;
-		}
-
-		//else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen > 8) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
-		if ((pEntry->RateLen > 8)
-#ifdef DOT11_N_SUPPORT
-			&& (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)
-#endif // DOT11_N_SUPPORT //
-			)
-		{// B/G  mixed AP
-			*ppTable = RateSwitchTable11BG;
-			*pTableSize = RateSwitchTable11BG[0];
-			*pInitTxRateIdx = RateSwitchTable11BG[1];
-
-			break;
-		}
-
-		//else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 8) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
-		if ((pEntry->RateLen == 8)
-#ifdef DOT11_N_SUPPORT
-			&& (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)
-#endif // DOT11_N_SUPPORT //
-			)
-		{// G only AP
-			*ppTable = RateSwitchTable11G;
-			*pTableSize = RateSwitchTable11G[0];
-			*pInitTxRateIdx = RateSwitchTable11G[1];
-
-			break;
-		}
-#ifdef DOT11_N_SUPPORT
-#endif // DOT11_N_SUPPORT //
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-#ifdef DOT11_N_SUPPORT
-			//else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
-			if ((pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0))
-#endif // DOT11_N_SUPPORT //
-			{	// Legacy mode
-				if (pAd->CommonCfg.MaxTxRate <= RATE_11)
-				{
-					*ppTable = RateSwitchTable11B;
-					*pTableSize = RateSwitchTable11B[0];
-					*pInitTxRateIdx = RateSwitchTable11B[1];
-				}
-				else if ((pAd->CommonCfg.MaxTxRate > RATE_11) && (pAd->CommonCfg.MinTxRate > RATE_11))
-				{
-					*ppTable = RateSwitchTable11G;
-					*pTableSize = RateSwitchTable11G[0];
-					*pInitTxRateIdx = RateSwitchTable11G[1];
-
-				}
-				else
-				{
-					*ppTable = RateSwitchTable11BG;
-					*pTableSize = RateSwitchTable11BG[0];
-					*pInitTxRateIdx = RateSwitchTable11BG[1];
-				}
-				break;
-			}
-#ifdef DOT11_N_SUPPORT
-			if (pAd->LatchRfRegs.Channel <= 14)
-			{
-				if (pAd->CommonCfg.TxStream == 1)
-				{
-					*ppTable = RateSwitchTable11N1S;
-					*pTableSize = RateSwitchTable11N1S[0];
-					*pInitTxRateIdx = RateSwitchTable11N1S[1];
-					DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode,default use 11N 1S AP \n"));
-				}
-				else
-				{
-					*ppTable = RateSwitchTable11N2S;
-					*pTableSize = RateSwitchTable11N2S[0];
-					*pInitTxRateIdx = RateSwitchTable11N2S[1];
-					DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode,default use 11N 2S AP \n"));
-				}
-			}
-			else
-			{
-				if (pAd->CommonCfg.TxStream == 1)
-				{
-					*ppTable = RateSwitchTable11N1S;
-					*pTableSize = RateSwitchTable11N1S[0];
-					*pInitTxRateIdx = RateSwitchTable11N1S[1];
-					DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode,default use 11N 1S AP \n"));
-				}
-				else
-				{
-					*ppTable = RateSwitchTable11N2SForABand;
-					*pTableSize = RateSwitchTable11N2SForABand[0];
-					*pInitTxRateIdx = RateSwitchTable11N2SForABand[1];
-					DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode,default use 11N 2S AP \n"));
-				}
-			}
-#endif // DOT11_N_SUPPORT //
-			DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode (SupRateLen=%d, ExtRateLen=%d, MCSSet[0]=0x%x, MCSSet[1]=0x%x)\n",
-				pAd->StaActive.SupRateLen, pAd->StaActive.ExtRateLen, pAd->StaActive.SupportedPhyInfo.MCSSet[0], pAd->StaActive.SupportedPhyInfo.MCSSet[1]));
-		}
-#endif // CONFIG_STA_SUPPORT //
-	} while(FALSE);
-}
-
-#ifdef CONFIG_STA_SUPPORT
-/*
-	==========================================================================
-	Description:
-		This routine checks if there're other APs out there capable for
-		roaming. Caller should call this routine only when Link up in INFRA mode
-		and channel quality is below CQI_GOOD_THRESHOLD.
-
-	IRQL = DISPATCH_LEVEL
-
-	Output:
-	==========================================================================
- */
-VOID MlmeCheckForRoaming(
-	IN PRTMP_ADAPTER pAd,
-	IN ULONG	Now32)
-{
-	USHORT	   i;
-	BSS_TABLE  *pRoamTab = &pAd->MlmeAux.RoamTab;
-	BSS_ENTRY  *pBss;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("==> MlmeCheckForRoaming\n"));
-	// put all roaming candidates into RoamTab, and sort in RSSI order
-	BssTableInit(pRoamTab);
-	for (i = 0; i < pAd->ScanTab.BssNr; i++)
-	{
-		pBss = &pAd->ScanTab.BssEntry[i];
-
-		if ((pBss->LastBeaconRxTime + BEACON_LOST_TIME) < Now32)
-			continue;	 // AP disappear
-		if (pBss->Rssi <= RSSI_THRESHOLD_FOR_ROAMING)
-			continue;	 // RSSI too weak. forget it.
-		if (MAC_ADDR_EQUAL(pBss->Bssid, pAd->CommonCfg.Bssid))
-			continue;	 // skip current AP
-		if (pBss->Rssi < (pAd->StaCfg.RssiSample.LastRssi0 + RSSI_DELTA))
-			continue;	 // only AP with stronger RSSI is eligible for roaming
-
-		// AP passing all above rules is put into roaming candidate table
-		NdisMoveMemory(&pRoamTab->BssEntry[pRoamTab->BssNr], pBss, sizeof(BSS_ENTRY));
-		pRoamTab->BssNr += 1;
-	}
-
-	if (pRoamTab->BssNr > 0)
-	{
-		// check CntlMachine.CurrState to avoid collision with NDIS SetOID request
-		if (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE)
-		{
-			pAd->RalinkCounters.PoorCQIRoamingCount ++;
-			DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - Roaming attempt #%ld\n", pAd->RalinkCounters.PoorCQIRoamingCount));
-			MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_MLME_ROAMING_REQ, 0, NULL);
-			RT28XX_MLME_HANDLER(pAd);
-		}
-	}
-	DBGPRINT(RT_DEBUG_TRACE, ("<== MlmeCheckForRoaming(# of candidate= %d)\n",pRoamTab->BssNr));
-}
-
-/*
-	==========================================================================
-	Description:
-		This routine checks if there're other APs out there capable for
-		roaming. Caller should call this routine only when link up in INFRA mode
-		and channel quality is below CQI_GOOD_THRESHOLD.
-
-	IRQL = DISPATCH_LEVEL
-
-	Output:
-	==========================================================================
- */
-VOID MlmeCheckForFastRoaming(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	ULONG			Now)
-{
-	USHORT		i;
-	BSS_TABLE	*pRoamTab = &pAd->MlmeAux.RoamTab;
-	BSS_ENTRY	*pBss;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("==> MlmeCheckForFastRoaming\n"));
-	// put all roaming candidates into RoamTab, and sort in RSSI order
-	BssTableInit(pRoamTab);
-	for (i = 0; i < pAd->ScanTab.BssNr; i++)
-	{
-		pBss = &pAd->ScanTab.BssEntry[i];
-
-        if ((pBss->Rssi <= -50) && (pBss->Channel == pAd->CommonCfg.Channel))
-			continue;	 // RSSI too weak. forget it.
-		if (MAC_ADDR_EQUAL(pBss->Bssid, pAd->CommonCfg.Bssid))
-			continue;	 // skip current AP
-		if (!SSID_EQUAL(pBss->Ssid, pBss->SsidLen, pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen))
-			continue;	 // skip different SSID
-        if (pBss->Rssi < (RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.LastRssi0, pAd->StaCfg.RssiSample.LastRssi1, pAd->StaCfg.RssiSample.LastRssi2) + RSSI_DELTA))
-			continue;	 // skip AP without better RSSI
-
-        DBGPRINT(RT_DEBUG_TRACE, ("LastRssi0 = %d, pBss->Rssi = %d\n", RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.LastRssi0, pAd->StaCfg.RssiSample.LastRssi1, pAd->StaCfg.RssiSample.LastRssi2), pBss->Rssi));
-		// AP passing all above rules is put into roaming candidate table
-		NdisMoveMemory(&pRoamTab->BssEntry[pRoamTab->BssNr], pBss, sizeof(BSS_ENTRY));
-		pRoamTab->BssNr += 1;
-	}
-
-	if (pRoamTab->BssNr > 0)
-	{
-		// check CntlMachine.CurrState to avoid collision with NDIS SetOID request
-		if (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE)
-		{
-			pAd->RalinkCounters.PoorCQIRoamingCount ++;
-			DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - Roaming attempt #%ld\n", pAd->RalinkCounters.PoorCQIRoamingCount));
-			MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_MLME_ROAMING_REQ, 0, NULL);
-			RT28XX_MLME_HANDLER(pAd);
-		}
-	}
-	// Maybe site survey required
-	else
-	{
-		if ((pAd->StaCfg.LastScanTime + 10 * 1000) < Now)
-		{
-			// check CntlMachine.CurrState to avoid collision with NDIS SetOID request
-			DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - Roaming, No eligable entry, try new scan!\n"));
-			pAd->StaCfg.ScanCnt = 2;
-			pAd->StaCfg.LastScanTime = Now;
-			MlmeAutoScan(pAd);
-		}
-	}
-
-    DBGPRINT(RT_DEBUG_TRACE, ("<== MlmeCheckForFastRoaming (BssNr=%d)\n", pRoamTab->BssNr));
-}
-
-/*
-	==========================================================================
-	Description:
-		This routine calculates TxPER, RxPER of the past N-sec period. And
-		according to the calculation result, ChannelQuality is calculated here
-		to decide if current AP is still doing the job.
-
-		If ChannelQuality is not good, a ROAMing attempt may be tried later.
-	Output:
-		StaCfg.ChannelQuality - 0..100
-
-	IRQL = DISPATCH_LEVEL
-
-	NOTE: This routine decide channle quality based on RX CRC error ratio.
-		Caller should make sure a function call to NICUpdateRawCounters(pAd)
-		is performed right before this routine, so that this routine can decide
-		channel quality based on the most up-to-date information
-	==========================================================================
- */
-VOID MlmeCalculateChannelQuality(
-	IN PRTMP_ADAPTER pAd,
-	IN ULONG Now32)
-{
-	ULONG TxOkCnt, TxCnt, TxPER, TxPRR;
-	ULONG RxCnt, RxPER;
-	UCHAR NorRssi;
-	CHAR  MaxRssi;
-	ULONG BeaconLostTime = BEACON_LOST_TIME;
-
-#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier
-	// longer beacon lost time when carrier detection enabled
-	if (pAd->CommonCfg.CarrierDetect.Enable == TRUE)
-	{
-		BeaconLostTime = BEACON_LOST_TIME + BEACON_LOST_TIME/2;
-	}
-#endif // CARRIER_DETECTION_SUPPORT //
-
-	MaxRssi = RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.LastRssi0, pAd->StaCfg.RssiSample.LastRssi1, pAd->StaCfg.RssiSample.LastRssi2);
-
-	//
-	// calculate TX packet error ratio and TX retry ratio - if too few TX samples, skip TX related statistics
-	//
-	TxOkCnt = pAd->RalinkCounters.OneSecTxNoRetryOkCount + pAd->RalinkCounters.OneSecTxRetryOkCount;
-	TxCnt = TxOkCnt + pAd->RalinkCounters.OneSecTxFailCount;
-	if (TxCnt < 5)
-	{
-		TxPER = 0;
-		TxPRR = 0;
-	}
-	else
-	{
-		TxPER = (pAd->RalinkCounters.OneSecTxFailCount * 100) / TxCnt;
-		TxPRR = ((TxCnt - pAd->RalinkCounters.OneSecTxNoRetryOkCount) * 100) / TxCnt;
-	}
-
-	//
-	// calculate RX PER - don't take RxPER into consideration if too few sample
-	//
-	RxCnt = pAd->RalinkCounters.OneSecRxOkCnt + pAd->RalinkCounters.OneSecRxFcsErrCnt;
-	if (RxCnt < 5)
-		RxPER = 0;
-	else
-		RxPER = (pAd->RalinkCounters.OneSecRxFcsErrCnt * 100) / RxCnt;
-
-	//
-	// decide ChannelQuality based on: 1)last BEACON received time, 2)last RSSI, 3)TxPER, and 4)RxPER
-	//
-	if (INFRA_ON(pAd) &&
-		(pAd->RalinkCounters.OneSecTxNoRetryOkCount < 2) && // no heavy traffic
-		(pAd->StaCfg.LastBeaconRxTime + BeaconLostTime < Now32))
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("BEACON lost > %ld msec with TxOkCnt=%ld -> CQI=0\n", BeaconLostTime, TxOkCnt));
-		pAd->Mlme.ChannelQuality = 0;
-	}
-	else
-	{
-		// Normalize Rssi
-		if (MaxRssi > -40)
-			NorRssi = 100;
-		else if (MaxRssi < -90)
-			NorRssi = 0;
-		else
-			NorRssi = (MaxRssi + 90) * 2;
-
-		// ChannelQuality = W1*RSSI + W2*TxPRR + W3*RxPER	 (RSSI 0..100), (TxPER 100..0), (RxPER 100..0)
-		pAd->Mlme.ChannelQuality = (RSSI_WEIGHTING * NorRssi +
-								   TX_WEIGHTING * (100 - TxPRR) +
-								   RX_WEIGHTING* (100 - RxPER)) / 100;
-		if (pAd->Mlme.ChannelQuality >= 100)
-			pAd->Mlme.ChannelQuality = 100;
-	}
-
-}
-
-VOID MlmeSetTxRate(
-	IN PRTMP_ADAPTER		pAd,
-	IN PMAC_TABLE_ENTRY		pEntry,
-	IN PRTMP_TX_RATE_SWITCH	pTxRate)
-{
-	UCHAR	MaxMode = MODE_OFDM;
-
-#ifdef DOT11_N_SUPPORT
-	MaxMode = MODE_HTGREENFIELD;
-
-	if (pTxRate->STBC && (pAd->StaCfg.MaxHTPhyMode.field.STBC) && (pAd->Antenna.field.TxPath == 2))
-		pAd->StaCfg.HTPhyMode.field.STBC = STBC_USE;
-	else
-#endif // DOT11_N_SUPPORT //
-		pAd->StaCfg.HTPhyMode.field.STBC = STBC_NONE;
-
-	if (pTxRate->CurrMCS < MCS_AUTO)
-		pAd->StaCfg.HTPhyMode.field.MCS = pTxRate->CurrMCS;
-
-	if (pAd->StaCfg.HTPhyMode.field.MCS > 7)
-		pAd->StaCfg.HTPhyMode.field.STBC = STBC_NONE;
-
-   	if (ADHOC_ON(pAd))
-	{
-		// If peer adhoc is b-only mode, we can't send 11g rate.
-		pAd->StaCfg.HTPhyMode.field.ShortGI = GI_800;
-		pEntry->HTPhyMode.field.STBC	= STBC_NONE;
-
-		//
-		// For Adhoc MODE_CCK, driver will use AdhocBOnlyJoined flag to roll back to B only if necessary
-		//
-		pEntry->HTPhyMode.field.MODE	= pTxRate->Mode;
-		pEntry->HTPhyMode.field.ShortGI	= pAd->StaCfg.HTPhyMode.field.ShortGI;
-		pEntry->HTPhyMode.field.MCS		= pAd->StaCfg.HTPhyMode.field.MCS;
-
-		// Patch speed error in status page
-		pAd->StaCfg.HTPhyMode.field.MODE = pEntry->HTPhyMode.field.MODE;
-	}
-	else
-	{
-		if (pTxRate->Mode <= MaxMode)
-			pAd->StaCfg.HTPhyMode.field.MODE = pTxRate->Mode;
-
-#ifdef DOT11_N_SUPPORT
-		if (pTxRate->ShortGI && (pAd->StaCfg.MaxHTPhyMode.field.ShortGI))
-			pAd->StaCfg.HTPhyMode.field.ShortGI = GI_400;
-		else
-#endif // DOT11_N_SUPPORT //
-			pAd->StaCfg.HTPhyMode.field.ShortGI = GI_800;
-
-#ifdef DOT11_N_SUPPORT
-		// Reexam each bandwidth's SGI support.
-		if (pAd->StaCfg.HTPhyMode.field.ShortGI == GI_400)
-		{
-			if ((pEntry->HTPhyMode.field.BW == BW_20) && (!CLIENT_STATUS_TEST_FLAG(pEntry, fCLIENT_STATUS_SGI20_CAPABLE)))
-				pAd->StaCfg.HTPhyMode.field.ShortGI = GI_800;
-			if ((pEntry->HTPhyMode.field.BW == BW_40) && (!CLIENT_STATUS_TEST_FLAG(pEntry, fCLIENT_STATUS_SGI40_CAPABLE)))
-				pAd->StaCfg.HTPhyMode.field.ShortGI = GI_800;
-		}
-
-		// Turn RTS/CTS rate to 6Mbps.
-		if ((pEntry->HTPhyMode.field.MCS == 0) && (pAd->StaCfg.HTPhyMode.field.MCS != 0))
-		{
-			pEntry->HTPhyMode.field.MCS		= pAd->StaCfg.HTPhyMode.field.MCS;
-			if (pAd->MacTab.fAnyBASession)
-			{
-				AsicUpdateProtect(pAd, HT_FORCERTSCTS, ALLN_SETPROTECT, TRUE, (BOOLEAN)pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent);
-			}
-			else
-			{
-				AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode, ALLN_SETPROTECT, TRUE, (BOOLEAN)pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent);
-			}
-		}
-		else if ((pEntry->HTPhyMode.field.MCS == 8) && (pAd->StaCfg.HTPhyMode.field.MCS != 8))
-		{
-			pEntry->HTPhyMode.field.MCS		= pAd->StaCfg.HTPhyMode.field.MCS;
-			if (pAd->MacTab.fAnyBASession)
-			{
-				AsicUpdateProtect(pAd, HT_FORCERTSCTS, ALLN_SETPROTECT, TRUE, (BOOLEAN)pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent);
-			}
-			else
-			{
-				AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode, ALLN_SETPROTECT, TRUE, (BOOLEAN)pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent);
-			}
-		}
-		else if ((pEntry->HTPhyMode.field.MCS != 0) && (pAd->StaCfg.HTPhyMode.field.MCS == 0))
-		{
-			AsicUpdateProtect(pAd, HT_RTSCTS_6M, ALLN_SETPROTECT, TRUE, (BOOLEAN)pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent);
-
-		}
-		else if ((pEntry->HTPhyMode.field.MCS != 8) && (pAd->StaCfg.HTPhyMode.field.MCS == 8))
-		{
-			AsicUpdateProtect(pAd, HT_RTSCTS_6M, ALLN_SETPROTECT, TRUE, (BOOLEAN)pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent);
-		}
-#endif // DOT11_N_SUPPORT //
-
-		pEntry->HTPhyMode.field.STBC	= pAd->StaCfg.HTPhyMode.field.STBC;
-		pEntry->HTPhyMode.field.ShortGI	= pAd->StaCfg.HTPhyMode.field.ShortGI;
-		pEntry->HTPhyMode.field.MCS		= pAd->StaCfg.HTPhyMode.field.MCS;
-		pEntry->HTPhyMode.field.MODE	= pAd->StaCfg.HTPhyMode.field.MODE;
-#ifdef DOT11_N_SUPPORT
-		if ((pAd->StaCfg.MaxHTPhyMode.field.MODE == MODE_HTGREENFIELD) &&
-		    pAd->WIFItestbed.bGreenField)
-		    pEntry->HTPhyMode.field.MODE = MODE_HTGREENFIELD;
-#endif // DOT11_N_SUPPORT //
-	}
-
-	pAd->LastTxRate = (USHORT)(pEntry->HTPhyMode.word);
-}
-
-/*
-	==========================================================================
-	Description:
-		This routine calculates the acumulated TxPER of eaxh TxRate. And
-		according to the calculation result, change CommonCfg.TxRate which
-		is the stable TX Rate we expect the Radio situation could sustained.
-
-		CommonCfg.TxRate will change dynamically within {RATE_1/RATE_6, MaxTxRate}
-	Output:
-		CommonCfg.TxRate -
-
-	IRQL = DISPATCH_LEVEL
-
-	NOTE:
-		call this routine every second
-	==========================================================================
- */
-VOID MlmeDynamicTxRateSwitching(
-	IN PRTMP_ADAPTER pAd)
-{
-	UCHAR					UpRateIdx = 0, DownRateIdx = 0, CurrRateIdx;
-	ULONG					i, AccuTxTotalCnt = 0, TxTotalCnt;
-	ULONG					TxErrorRatio = 0;
-	BOOLEAN					bTxRateChanged, bUpgradeQuality = FALSE;
-	PRTMP_TX_RATE_SWITCH	pCurrTxRate, pNextTxRate = NULL;
-	PUCHAR					pTable;
-	UCHAR					TableSize = 0;
-	UCHAR					InitTxRateIdx = 0, TrainUp, TrainDown;
-	CHAR					Rssi, RssiOffset = 0;
-	TX_STA_CNT1_STRUC		StaTx1;
-	TX_STA_CNT0_STRUC		TxStaCnt0;
-	ULONG					TxRetransmit = 0, TxSuccess = 0, TxFailCount = 0;
-	MAC_TABLE_ENTRY			*pEntry;
-
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-	{
-		return;
-	}
-#endif // RALINK_ATE //
-
-	//
-	// walk through MAC table, see if need to change AP's TX rate toward each entry
-	//
-   	for (i = 1; i < MAX_LEN_OF_MAC_TABLE; i++)
-	{
-		pEntry = &pAd->MacTab.Content[i];
-
-		// check if this entry need to switch rate automatically
-		if (RTMPCheckEntryEnableAutoRateSwitch(pAd, pEntry) == FALSE)
-			continue;
-
-		if ((pAd->MacTab.Size == 1) || (pEntry->ValidAsDls))
-		{
-			Rssi = RTMPMaxRssi(pAd,
-							   pAd->StaCfg.RssiSample.AvgRssi0,
-							   pAd->StaCfg.RssiSample.AvgRssi1,
-							   pAd->StaCfg.RssiSample.AvgRssi2);
-
-			// Update statistic counter
-			RTMP_IO_READ32(pAd, TX_STA_CNT0, &TxStaCnt0.word);
-			RTMP_IO_READ32(pAd, TX_STA_CNT1, &StaTx1.word);
-			pAd->bUpdateBcnCntDone = TRUE;
-			TxRetransmit = StaTx1.field.TxRetransmit;
-			TxSuccess = StaTx1.field.TxSuccess;
-			TxFailCount = TxStaCnt0.field.TxFailCount;
-			TxTotalCnt = TxRetransmit + TxSuccess + TxFailCount;
-
-			pAd->RalinkCounters.OneSecTxRetryOkCount += StaTx1.field.TxRetransmit;
-			pAd->RalinkCounters.OneSecTxNoRetryOkCount += StaTx1.field.TxSuccess;
-			pAd->RalinkCounters.OneSecTxFailCount += TxStaCnt0.field.TxFailCount;
-			pAd->WlanCounters.TransmittedFragmentCount.u.LowPart += StaTx1.field.TxSuccess;
-			pAd->WlanCounters.RetryCount.u.LowPart += StaTx1.field.TxRetransmit;
-			pAd->WlanCounters.FailedCount.u.LowPart += TxStaCnt0.field.TxFailCount;
-
-			// if no traffic in the past 1-sec period, don't change TX rate,
-			// but clear all bad history. because the bad history may affect the next
-			// Chariot throughput test
-			AccuTxTotalCnt = pAd->RalinkCounters.OneSecTxNoRetryOkCount +
-						 pAd->RalinkCounters.OneSecTxRetryOkCount +
-						 pAd->RalinkCounters.OneSecTxFailCount;
-
-			if (TxTotalCnt)
-				TxErrorRatio = ((TxRetransmit + TxFailCount) * 100) / TxTotalCnt;
-		}
-		else
-		{
-			if (INFRA_ON(pAd) && (i == 1))
-				Rssi = RTMPMaxRssi(pAd,
-								   pAd->StaCfg.RssiSample.AvgRssi0,
-								   pAd->StaCfg.RssiSample.AvgRssi1,
-								   pAd->StaCfg.RssiSample.AvgRssi2);
-			else
-				Rssi = RTMPMaxRssi(pAd,
-								   pEntry->RssiSample.AvgRssi0,
-								   pEntry->RssiSample.AvgRssi1,
-								   pEntry->RssiSample.AvgRssi2);
-
-			TxTotalCnt = pEntry->OneSecTxNoRetryOkCount +
-				 pEntry->OneSecTxRetryOkCount +
-				 pEntry->OneSecTxFailCount;
-
-			if (TxTotalCnt)
-				TxErrorRatio = ((pEntry->OneSecTxRetryOkCount + pEntry->OneSecTxFailCount) * 100) / TxTotalCnt;
-		}
-
-		CurrRateIdx = pEntry->CurrTxRateIndex;
-
-		MlmeSelectTxRateTable(pAd, pEntry, &pTable, &TableSize, &InitTxRateIdx);
-
-		if (CurrRateIdx >= TableSize)
-		{
-			CurrRateIdx = TableSize - 1;
-		}
-
-		// When switch from Fixed rate -> auto rate, the REAL TX rate might be different from pAd->CommonCfg.TxRateIndex.
-		// So need to sync here.
-		pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(CurrRateIdx+1)*5];
-		if ((pEntry->HTPhyMode.field.MCS != pCurrTxRate->CurrMCS)
-			//&& (pAd->StaCfg.bAutoTxRateSwitch == TRUE)
-			)
-		{
-
-			// Need to sync Real Tx rate and our record.
-			// Then return for next DRS.
-			pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(InitTxRateIdx+1)*5];
-			pEntry->CurrTxRateIndex = InitTxRateIdx;
-			MlmeSetTxRate(pAd, pEntry, pCurrTxRate);
-
-			// reset all OneSecTx counters
-			RESET_ONE_SEC_TX_CNT(pEntry);
-			continue;
-		}
-
-		// decide the next upgrade rate and downgrade rate, if any
-		if ((CurrRateIdx > 0) && (CurrRateIdx < (TableSize - 1)))
-		{
-			UpRateIdx = CurrRateIdx + 1;
-			DownRateIdx = CurrRateIdx -1;
-		}
-		else if (CurrRateIdx == 0)
-		{
-			UpRateIdx = CurrRateIdx + 1;
-			DownRateIdx = CurrRateIdx;
-		}
-		else if (CurrRateIdx == (TableSize - 1))
-		{
-			UpRateIdx = CurrRateIdx;
-			DownRateIdx = CurrRateIdx - 1;
-		}
-
-		pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(CurrRateIdx+1)*5];
-
-#ifdef DOT11_N_SUPPORT
-		if ((Rssi > -65) && (pCurrTxRate->Mode >= MODE_HTMIX))
-		{
-			TrainUp		= (pCurrTxRate->TrainUp + (pCurrTxRate->TrainUp >> 1));
-			TrainDown	= (pCurrTxRate->TrainDown + (pCurrTxRate->TrainDown >> 1));
-		}
-		else
-#endif // DOT11_N_SUPPORT //
-		{
-			TrainUp		= pCurrTxRate->TrainUp;
-			TrainDown	= pCurrTxRate->TrainDown;
-		}
-
-		//pAd->DrsCounters.LastTimeTxRateChangeAction = pAd->DrsCounters.LastSecTxRateChangeAction;
-
-		//
-		// Keep the last time TxRateChangeAction status.
-		//
-		pEntry->LastTimeTxRateChangeAction = pEntry->LastSecTxRateChangeAction;
-
-
-
-		//
-		// CASE 1. when TX samples are fewer than 15, then decide TX rate solely on RSSI
-		//         (criteria copied from RT2500 for Netopia case)
-		//
-		if (TxTotalCnt <= 15)
-		{
-			CHAR	idx = 0;
-			UCHAR	TxRateIdx;
-			//UCHAR	MCS0 = 0, MCS1 = 0, MCS2 = 0, MCS3 = 0, MCS4 = 0, MCS7 = 0, MCS12 = 0, MCS13 = 0, MCS14 = 0, MCS15 = 0;
-			UCHAR	MCS0 = 0, MCS1 = 0, MCS2 = 0, MCS3 = 0, MCS4 = 0,  MCS5 =0, MCS6 = 0, MCS7 = 0;
-	        UCHAR	MCS12 = 0, MCS13 = 0, MCS14 = 0, MCS15 = 0;
-			UCHAR	MCS20 = 0, MCS21 = 0, MCS22 = 0, MCS23 = 0; // 3*3
-
-			// check the existence and index of each needed MCS
-			while (idx < pTable[0])
-			{
-				pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(idx+1)*5];
-
-				if (pCurrTxRate->CurrMCS == MCS_0)
-				{
-					MCS0 = idx;
-				}
-				else if (pCurrTxRate->CurrMCS == MCS_1)
-				{
-					MCS1 = idx;
-				}
-				else if (pCurrTxRate->CurrMCS == MCS_2)
-				{
-					MCS2 = idx;
-				}
-				else if (pCurrTxRate->CurrMCS == MCS_3)
-				{
-					MCS3 = idx;
-				}
-				else if (pCurrTxRate->CurrMCS == MCS_4)
-				{
-					MCS4 = idx;
-				}
-	            else if (pCurrTxRate->CurrMCS == MCS_5)
-	            {
-	                MCS5 = idx;
-	            }
-	            else if (pCurrTxRate->CurrMCS == MCS_6)
-	            {
-	                MCS6 = idx;
-	            }
-				//else if (pCurrTxRate->CurrMCS == MCS_7)
-				else if ((pCurrTxRate->CurrMCS == MCS_7) && (pCurrTxRate->ShortGI == GI_800))	// prevent the highest MCS using short GI when 1T and low throughput
-				{
-					MCS7 = idx;
-				}
-				else if (pCurrTxRate->CurrMCS == MCS_12)
-				{
-					MCS12 = idx;
-				}
-				else if (pCurrTxRate->CurrMCS == MCS_13)
-				{
-					MCS13 = idx;
-				}
-				else if (pCurrTxRate->CurrMCS == MCS_14)
-				{
-					MCS14 = idx;
-				}
-				//else if ((pCurrTxRate->CurrMCS == MCS_15)/* && (pCurrTxRate->ShortGI == GI_800)*/)	//we hope to use ShortGI as initial rate
-				else if ((pCurrTxRate->CurrMCS == MCS_15) && (pCurrTxRate->ShortGI == GI_800))	//we hope to use ShortGI as initial rate, however Atheros's chip has bugs when short GI
-				{
-					MCS15 = idx;
-				}
-				else if (pCurrTxRate->CurrMCS == MCS_20) // 3*3
-				{
-					MCS20 = idx;
-				}
-				else if (pCurrTxRate->CurrMCS == MCS_21)
-				{
-					MCS21 = idx;
-				}
-				else if (pCurrTxRate->CurrMCS == MCS_22)
-				{
-					MCS22 = idx;
-				}
-				else if (pCurrTxRate->CurrMCS == MCS_23)
-				{
-					MCS23 = idx;
-				}
-				idx ++;
-			}
-
-			if (pAd->LatchRfRegs.Channel <= 14)
-			{
-				if (pAd->NicConfig2.field.ExternalLNAForG)
-				{
-					RssiOffset = 2;
-				}
-				else
-				{
-					RssiOffset = 5;
-				}
-			}
-			else
-			{
-				if (pAd->NicConfig2.field.ExternalLNAForA)
-				{
-					RssiOffset = 5;
-				}
-				else
-				{
-					RssiOffset = 8;
-				}
-			}
-#ifdef DOT11_N_SUPPORT
-			/*if (MCS15)*/
-			if ((pTable == RateSwitchTable11BGN3S) ||
-				(pTable == RateSwitchTable11N3S) ||
-				(pTable == RateSwitchTable))
-			{// N mode with 3 stream // 3*3
-				if (MCS23 && (Rssi >= -70))
-					TxRateIdx = MCS15;
-				else if (MCS22 && (Rssi >= -72))
-					TxRateIdx = MCS14;
-        	    else if (MCS21 && (Rssi >= -76))
-					TxRateIdx = MCS13;
-				else if (MCS20 && (Rssi >= -78))
-					TxRateIdx = MCS12;
-			else if (MCS4 && (Rssi >= -82))
-				TxRateIdx = MCS4;
-			else if (MCS3 && (Rssi >= -84))
-				TxRateIdx = MCS3;
-			else if (MCS2 && (Rssi >= -86))
-				TxRateIdx = MCS2;
-			else if (MCS1 && (Rssi >= -88))
-				TxRateIdx = MCS1;
-			else
-				TxRateIdx = MCS0;
-		}
-//		else if ((pTable == RateSwitchTable11BGN2S) || (pTable == RateSwitchTable11BGN2SForABand) ||(pTable == RateSwitchTable11N2S) ||(pTable == RateSwitchTable11N2SForABand) || (pTable == RateSwitchTable))
-		else if ((pTable == RateSwitchTable11BGN2S) || (pTable == RateSwitchTable11BGN2SForABand) ||(pTable == RateSwitchTable11N2S) ||(pTable == RateSwitchTable11N2SForABand)) // 3*3
-			{// N mode with 2 stream
-				if (MCS15 && (Rssi >= (-70+RssiOffset)))
-					TxRateIdx = MCS15;
-				else if (MCS14 && (Rssi >= (-72+RssiOffset)))
-					TxRateIdx = MCS14;
-				else if (MCS13 && (Rssi >= (-76+RssiOffset)))
-					TxRateIdx = MCS13;
-				else if (MCS12 && (Rssi >= (-78+RssiOffset)))
-					TxRateIdx = MCS12;
-				else if (MCS4 && (Rssi >= (-82+RssiOffset)))
-					TxRateIdx = MCS4;
-				else if (MCS3 && (Rssi >= (-84+RssiOffset)))
-					TxRateIdx = MCS3;
-				else if (MCS2 && (Rssi >= (-86+RssiOffset)))
-					TxRateIdx = MCS2;
-				else if (MCS1 && (Rssi >= (-88+RssiOffset)))
-					TxRateIdx = MCS1;
-				else
-					TxRateIdx = MCS0;
-			}
-			else if ((pTable == RateSwitchTable11BGN1S) || (pTable == RateSwitchTable11N1S))
-			{// N mode with 1 stream
-				if (MCS7 && (Rssi > (-72+RssiOffset)))
-					TxRateIdx = MCS7;
-				else if (MCS6 && (Rssi > (-74+RssiOffset)))
-					TxRateIdx = MCS6;
-				else if (MCS5 && (Rssi > (-77+RssiOffset)))
-					TxRateIdx = MCS5;
-				else if (MCS4 && (Rssi > (-79+RssiOffset)))
-					TxRateIdx = MCS4;
-				else if (MCS3 && (Rssi > (-81+RssiOffset)))
-					TxRateIdx = MCS3;
-				else if (MCS2 && (Rssi > (-83+RssiOffset)))
-					TxRateIdx = MCS2;
-				else if (MCS1 && (Rssi > (-86+RssiOffset)))
-					TxRateIdx = MCS1;
-				else
-					TxRateIdx = MCS0;
-			}
-			else
-#endif // DOT11_N_SUPPORT //
-			{// Legacy mode
-				if (MCS7 && (Rssi > -70))
-					TxRateIdx = MCS7;
-				else if (MCS6 && (Rssi > -74))
-					TxRateIdx = MCS6;
-				else if (MCS5 && (Rssi > -78))
-					TxRateIdx = MCS5;
-				else if (MCS4 && (Rssi > -82))
-					TxRateIdx = MCS4;
-				else if (MCS4 == 0)	// for B-only mode
-					TxRateIdx = MCS3;
-				else if (MCS3 && (Rssi > -85))
-					TxRateIdx = MCS3;
-				else if (MCS2 && (Rssi > -87))
-					TxRateIdx = MCS2;
-				else if (MCS1 && (Rssi > -90))
-					TxRateIdx = MCS1;
-				else
-					TxRateIdx = MCS0;
-			}
-
-	//		if (TxRateIdx != pAd->CommonCfg.TxRateIndex)
-			{
-				pEntry->CurrTxRateIndex = TxRateIdx;
-				pNextTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(pEntry->CurrTxRateIndex+1)*5];
-				MlmeSetTxRate(pAd, pEntry, pNextTxRate);
-			}
-
-			NdisZeroMemory(pEntry->TxQuality, sizeof(USHORT) * MAX_STEP_OF_TX_RATE_SWITCH);
-			NdisZeroMemory(pEntry->PER, sizeof(UCHAR) * MAX_STEP_OF_TX_RATE_SWITCH);
-			pEntry->fLastSecAccordingRSSI = TRUE;
-			// reset all OneSecTx counters
-			RESET_ONE_SEC_TX_CNT(pEntry);
-
-			continue;
-		}
-
-		if (pEntry->fLastSecAccordingRSSI == TRUE)
-		{
-			pEntry->fLastSecAccordingRSSI = FALSE;
-			pEntry->LastSecTxRateChangeAction = 0;
-			// reset all OneSecTx counters
-			RESET_ONE_SEC_TX_CNT(pEntry);
-
-			continue;
-		}
-
-		do
-		{
-			BOOLEAN	bTrainUpDown = FALSE;
-
-			pEntry->CurrTxRateStableTime ++;
-
-			// downgrade TX quality if PER >= Rate-Down threshold
-			if (TxErrorRatio >= TrainDown)
-			{
-				bTrainUpDown = TRUE;
-				pEntry->TxQuality[CurrRateIdx] = DRS_TX_QUALITY_WORST_BOUND;
-			}
-			// upgrade TX quality if PER <= Rate-Up threshold
-			else if (TxErrorRatio <= TrainUp)
-			{
-				bTrainUpDown = TRUE;
-				bUpgradeQuality = TRUE;
-				if (pEntry->TxQuality[CurrRateIdx])
-					pEntry->TxQuality[CurrRateIdx] --;  // quality very good in CurrRate
-
-				if (pEntry->TxRateUpPenalty)
-					pEntry->TxRateUpPenalty --;
-				else if (pEntry->TxQuality[UpRateIdx])
-					pEntry->TxQuality[UpRateIdx] --;    // may improve next UP rate's quality
-			}
-
-			pEntry->PER[CurrRateIdx] = (UCHAR)TxErrorRatio;
-
-			if (bTrainUpDown)
-			{
-				// perform DRS - consider TxRate Down first, then rate up.
-				if ((CurrRateIdx != DownRateIdx) && (pEntry->TxQuality[CurrRateIdx] >= DRS_TX_QUALITY_WORST_BOUND))
-				{
-					pEntry->CurrTxRateIndex = DownRateIdx;
-				}
-				else if ((CurrRateIdx != UpRateIdx) && (pEntry->TxQuality[UpRateIdx] <= 0))
-				{
-					pEntry->CurrTxRateIndex = UpRateIdx;
-				}
-			}
-		} while (FALSE);
-
-		// if rate-up happen, clear all bad history of all TX rates
-		if (pEntry->CurrTxRateIndex > CurrRateIdx)
-		{
-			pEntry->CurrTxRateStableTime = 0;
-			pEntry->TxRateUpPenalty = 0;
-			pEntry->LastSecTxRateChangeAction = 1; // rate UP
-			NdisZeroMemory(pEntry->TxQuality, sizeof(USHORT) * MAX_STEP_OF_TX_RATE_SWITCH);
-			NdisZeroMemory(pEntry->PER, sizeof(UCHAR) * MAX_STEP_OF_TX_RATE_SWITCH);
-
-			//
-			// For TxRate fast train up
-			//
-			if (!pAd->StaCfg.StaQuickResponeForRateUpTimerRunning)
-			{
-				RTMPSetTimer(&pAd->StaCfg.StaQuickResponeForRateUpTimer, 100);
-
-				pAd->StaCfg.StaQuickResponeForRateUpTimerRunning = TRUE;
-			}
-			bTxRateChanged = TRUE;
-		}
-		// if rate-down happen, only clear DownRate's bad history
-		else if (pEntry->CurrTxRateIndex < CurrRateIdx)
-		{
-			pEntry->CurrTxRateStableTime = 0;
-			pEntry->TxRateUpPenalty = 0;           // no penalty
-			pEntry->LastSecTxRateChangeAction = 2; // rate DOWN
-			pEntry->TxQuality[pEntry->CurrTxRateIndex] = 0;
-			pEntry->PER[pEntry->CurrTxRateIndex] = 0;
-
-			//
-			// For TxRate fast train down
-			//
-			if (!pAd->StaCfg.StaQuickResponeForRateUpTimerRunning)
-			{
-				RTMPSetTimer(&pAd->StaCfg.StaQuickResponeForRateUpTimer, 100);
-
-				pAd->StaCfg.StaQuickResponeForRateUpTimerRunning = TRUE;
-			}
-			bTxRateChanged = TRUE;
-		}
-		else
-		{
-			pEntry->LastSecTxRateChangeAction = 0; // rate no change
-			bTxRateChanged = FALSE;
-		}
-
-		pEntry->LastTxOkCount = TxSuccess;
-
-		// reset all OneSecTx counters
-		RESET_ONE_SEC_TX_CNT(pEntry);
-
-		pNextTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(pEntry->CurrTxRateIndex+1)*5];
-		if (bTxRateChanged && pNextTxRate)
-		{
-			MlmeSetTxRate(pAd, pEntry, pNextTxRate);
-		}
-	}
-}
-
-/*
-	========================================================================
-	Routine Description:
-		Station side, Auto TxRate faster train up timer call back function.
-
-	Arguments:
-		SystemSpecific1			- Not used.
-		FunctionContext			- Pointer to our Adapter context.
-		SystemSpecific2			- Not used.
-		SystemSpecific3			- Not used.
-
-	Return Value:
-		None
-
-	========================================================================
-*/
-VOID StaQuickResponeForRateUpExec(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3)
-{
-	PRTMP_ADAPTER			pAd = (PRTMP_ADAPTER)FunctionContext;
-	UCHAR					UpRateIdx = 0, DownRateIdx = 0, CurrRateIdx = 0;
-	ULONG					TxTotalCnt;
-	ULONG					TxErrorRatio = 0;
-	BOOLEAN					bTxRateChanged; //, bUpgradeQuality = FALSE;
-	PRTMP_TX_RATE_SWITCH	pCurrTxRate, pNextTxRate = NULL;
-	PUCHAR					pTable;
-	UCHAR					TableSize = 0;
-	UCHAR					InitTxRateIdx = 0, TrainUp, TrainDown;
-	TX_STA_CNT1_STRUC		StaTx1;
-	TX_STA_CNT0_STRUC		TxStaCnt0;
-	CHAR					Rssi, ratio;
-	ULONG					TxRetransmit = 0, TxSuccess = 0, TxFailCount = 0;
-	MAC_TABLE_ENTRY			*pEntry;
-	ULONG					i;
-
-	pAd->StaCfg.StaQuickResponeForRateUpTimerRunning = FALSE;
-
-    //
-    // walk through MAC table, see if need to change AP's TX rate toward each entry
-    //
-	for (i = 1; i < MAX_LEN_OF_MAC_TABLE; i++)
-	{
-		pEntry = &pAd->MacTab.Content[i];
-
-		// check if this entry need to switch rate automatically
-		if (RTMPCheckEntryEnableAutoRateSwitch(pAd, pEntry) == FALSE)
-			continue;
-
-		if (INFRA_ON(pAd) && (i == 1))
-			Rssi = RTMPMaxRssi(pAd,
-							   pAd->StaCfg.RssiSample.AvgRssi0,
-							   pAd->StaCfg.RssiSample.AvgRssi1,
-							   pAd->StaCfg.RssiSample.AvgRssi2);
-		else
-			Rssi = RTMPMaxRssi(pAd,
-							   pEntry->RssiSample.AvgRssi0,
-							   pEntry->RssiSample.AvgRssi1,
-							   pEntry->RssiSample.AvgRssi2);
-
-		CurrRateIdx = pAd->CommonCfg.TxRateIndex;
-
-			MlmeSelectTxRateTable(pAd, pEntry, &pTable, &TableSize, &InitTxRateIdx);
-
-		// decide the next upgrade rate and downgrade rate, if any
-		if ((CurrRateIdx > 0) && (CurrRateIdx < (TableSize - 1)))
-		{
-			UpRateIdx = CurrRateIdx + 1;
-			DownRateIdx = CurrRateIdx -1;
-		}
-		else if (CurrRateIdx == 0)
-		{
-			UpRateIdx = CurrRateIdx + 1;
-			DownRateIdx = CurrRateIdx;
-		}
-		else if (CurrRateIdx == (TableSize - 1))
-		{
-			UpRateIdx = CurrRateIdx;
-			DownRateIdx = CurrRateIdx - 1;
-		}
-
-		pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(CurrRateIdx+1)*5];
-
-#ifdef DOT11_N_SUPPORT
-		if ((Rssi > -65) && (pCurrTxRate->Mode >= MODE_HTMIX))
-		{
-			TrainUp		= (pCurrTxRate->TrainUp + (pCurrTxRate->TrainUp >> 1));
-			TrainDown	= (pCurrTxRate->TrainDown + (pCurrTxRate->TrainDown >> 1));
-		}
-		else
-#endif // DOT11_N_SUPPORT //
-		{
-			TrainUp		= pCurrTxRate->TrainUp;
-			TrainDown	= pCurrTxRate->TrainDown;
-		}
-
-		if (pAd->MacTab.Size == 1)
-		{
-			// Update statistic counter
-			RTMP_IO_READ32(pAd, TX_STA_CNT0, &TxStaCnt0.word);
-			RTMP_IO_READ32(pAd, TX_STA_CNT1, &StaTx1.word);
-
-			TxRetransmit = StaTx1.field.TxRetransmit;
-			TxSuccess = StaTx1.field.TxSuccess;
-			TxFailCount = TxStaCnt0.field.TxFailCount;
-			TxTotalCnt = TxRetransmit + TxSuccess + TxFailCount;
-
-			pAd->RalinkCounters.OneSecTxRetryOkCount += StaTx1.field.TxRetransmit;
-			pAd->RalinkCounters.OneSecTxNoRetryOkCount += StaTx1.field.TxSuccess;
-			pAd->RalinkCounters.OneSecTxFailCount += TxStaCnt0.field.TxFailCount;
-			pAd->WlanCounters.TransmittedFragmentCount.u.LowPart += StaTx1.field.TxSuccess;
-			pAd->WlanCounters.RetryCount.u.LowPart += StaTx1.field.TxRetransmit;
-			pAd->WlanCounters.FailedCount.u.LowPart += TxStaCnt0.field.TxFailCount;
-
-#if 0 // test by Gary.
-			// if no traffic in the past 1-sec period, don't change TX rate,
-			// but clear all bad history. because the bad history may affect the next
-			// Chariot throughput test
-			TxTotalCnt = pAd->RalinkCounters.OneSecTxNoRetryOkCount +
-						 pAd->RalinkCounters.OneSecTxRetryOkCount +
-						 pAd->RalinkCounters.OneSecTxFailCount;
-#endif
-			if (TxTotalCnt)
-				TxErrorRatio = ((TxRetransmit + TxFailCount) * 100) / TxTotalCnt;
-		}
-		else
-		{
-			TxTotalCnt = pEntry->OneSecTxNoRetryOkCount +
-				 pEntry->OneSecTxRetryOkCount +
-				 pEntry->OneSecTxFailCount;
-
-			if (TxTotalCnt)
-				TxErrorRatio = ((pEntry->OneSecTxRetryOkCount + pEntry->OneSecTxFailCount) * 100) / TxTotalCnt;
-		}
-
-
-		//
-		// CASE 1. when TX samples are fewer than 15, then decide TX rate solely on RSSI
-		//         (criteria copied from RT2500 for Netopia case)
-		//
-		if (TxTotalCnt <= 12)
-		{
-			NdisZeroMemory(pAd->DrsCounters.TxQuality, sizeof(USHORT) * MAX_STEP_OF_TX_RATE_SWITCH);
-			NdisZeroMemory(pAd->DrsCounters.PER, sizeof(UCHAR) * MAX_STEP_OF_TX_RATE_SWITCH);
-
-			if ((pAd->DrsCounters.LastSecTxRateChangeAction == 1) && (CurrRateIdx != DownRateIdx))
-			{
-				pAd->CommonCfg.TxRateIndex = DownRateIdx;
-				pAd->DrsCounters.TxQuality[CurrRateIdx] = DRS_TX_QUALITY_WORST_BOUND;
-			}
-			else if ((pAd->DrsCounters.LastSecTxRateChangeAction == 2) && (CurrRateIdx != UpRateIdx))
-			{
-				pAd->CommonCfg.TxRateIndex = UpRateIdx;
-			}
-
-			DBGPRINT_RAW(RT_DEBUG_TRACE,("QuickDRS: TxTotalCnt <= 15, train back to original rate \n"));
-			return;
-		}
-
-		do
-		{
-			ULONG OneSecTxNoRetryOKRationCount;
-
-			if (pAd->DrsCounters.LastTimeTxRateChangeAction == 0)
-				ratio = 5;
-			else
-				ratio = 4;
-
-			// downgrade TX quality if PER >= Rate-Down threshold
-			if (TxErrorRatio >= TrainDown)
-			{
-				pAd->DrsCounters.TxQuality[CurrRateIdx] = DRS_TX_QUALITY_WORST_BOUND;
-			}
-
-			pAd->DrsCounters.PER[CurrRateIdx] = (UCHAR)TxErrorRatio;
-
-			OneSecTxNoRetryOKRationCount = (TxSuccess * ratio);
-
-			// perform DRS - consider TxRate Down first, then rate up.
-			if ((pAd->DrsCounters.LastSecTxRateChangeAction == 1) && (CurrRateIdx != DownRateIdx))
-			{
-				if ((pAd->DrsCounters.LastTxOkCount + 2) >= OneSecTxNoRetryOKRationCount)
-				{
-					pAd->CommonCfg.TxRateIndex = DownRateIdx;
-					pAd->DrsCounters.TxQuality[CurrRateIdx] = DRS_TX_QUALITY_WORST_BOUND;
-
-				}
-
-			}
-			else if ((pAd->DrsCounters.LastSecTxRateChangeAction == 2) && (CurrRateIdx != UpRateIdx))
-			{
-				if ((TxErrorRatio >= 50) || (TxErrorRatio >= TrainDown))
-				{
-
-				}
-				else if ((pAd->DrsCounters.LastTxOkCount + 2) >= OneSecTxNoRetryOKRationCount)
-				{
-					pAd->CommonCfg.TxRateIndex = UpRateIdx;
-				}
-			}
-		}while (FALSE);
-
-		// if rate-up happen, clear all bad history of all TX rates
-		if (pAd->CommonCfg.TxRateIndex > CurrRateIdx)
-		{
-			pAd->DrsCounters.TxRateUpPenalty = 0;
-			NdisZeroMemory(pAd->DrsCounters.TxQuality, sizeof(USHORT) * MAX_STEP_OF_TX_RATE_SWITCH);
-			NdisZeroMemory(pAd->DrsCounters.PER, sizeof(UCHAR) * MAX_STEP_OF_TX_RATE_SWITCH);
-			bTxRateChanged = TRUE;
-		}
-		// if rate-down happen, only clear DownRate's bad history
-		else if (pAd->CommonCfg.TxRateIndex < CurrRateIdx)
-		{
-			DBGPRINT_RAW(RT_DEBUG_TRACE,("QuickDRS: --TX rate from %d to %d \n", CurrRateIdx, pAd->CommonCfg.TxRateIndex));
-
-			pAd->DrsCounters.TxRateUpPenalty = 0;           // no penalty
-			pAd->DrsCounters.TxQuality[pAd->CommonCfg.TxRateIndex] = 0;
-			pAd->DrsCounters.PER[pAd->CommonCfg.TxRateIndex] = 0;
-			bTxRateChanged = TRUE;
-		}
-		else
-		{
-			bTxRateChanged = FALSE;
-		}
-
-		pNextTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(pAd->CommonCfg.TxRateIndex+1)*5];
-		if (bTxRateChanged && pNextTxRate)
-		{
-			MlmeSetTxRate(pAd, pEntry, pNextTxRate);
-		}
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-		This routine is executed periodically inside MlmePeriodicExec() after
-		association with an AP.
-		It checks if StaCfg.Psm is consistent with user policy (recorded in
-		StaCfg.WindowsPowerMode). If not, enforce user policy. However,
-		there're some conditions to consider:
-		1. we don't support power-saving in ADHOC mode, so Psm=PWR_ACTIVE all
-		   the time when Mibss==TRUE
-		2. When link up in INFRA mode, Psm should not be switch to PWR_SAVE
-		   if outgoing traffic available in TxRing or MgmtRing.
-	Output:
-		1. change pAd->StaCfg.Psm to PWR_SAVE or leave it untouched
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID MlmeCheckPsmChange(
-	IN PRTMP_ADAPTER pAd,
-	IN ULONG	Now32)
-{
-	ULONG	PowerMode;
-
-	// condition -
-	// 1. Psm maybe ON only happen in INFRASTRUCTURE mode
-	// 2. user wants either MAX_PSP or FAST_PSP
-	// 3. but current psm is not in PWR_SAVE
-	// 4. CNTL state machine is not doing SCANning
-	// 5. no TX SUCCESS event for the past 1-sec period
-#ifdef NDIS51_MINIPORT
-	if (pAd->StaCfg.WindowsPowerProfile == NdisPowerProfileBattery)
-		PowerMode = pAd->StaCfg.WindowsBatteryPowerMode;
-	else
-#endif
-		PowerMode = pAd->StaCfg.WindowsPowerMode;
-
-	if (INFRA_ON(pAd) &&
-		(PowerMode != Ndis802_11PowerModeCAM) &&
-		(pAd->StaCfg.Psm == PWR_ACTIVE) &&
-//		(! RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-		(pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) /*&&
-		(pAd->RalinkCounters.OneSecTxNoRetryOkCount == 0) &&
-		(pAd->RalinkCounters.OneSecTxRetryOkCount == 0)*/)
-	{
-		NdisGetSystemUpTime(&pAd->Mlme.LastSendNULLpsmTime);
-		pAd->RalinkCounters.RxCountSinceLastNULL = 0;
-		MlmeSetPsmBit(pAd, PWR_SAVE);
-		if (!(pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable))
-		{
-			RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, FALSE);
-		}
-		else
-		{
-			RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, TRUE);
-		}
-	}
-}
-
-// IRQL = PASSIVE_LEVEL
-// IRQL = DISPATCH_LEVEL
-VOID MlmeSetPsmBit(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT psm)
-{
-	AUTO_RSP_CFG_STRUC csr4;
-
-	pAd->StaCfg.Psm = psm;
-	RTMP_IO_READ32(pAd, AUTO_RSP_CFG, &csr4.word);
-	csr4.field.AckCtsPsmBit = (psm == PWR_SAVE)? 1:0;
-	RTMP_IO_WRITE32(pAd, AUTO_RSP_CFG, csr4.word);
-	DBGPRINT(RT_DEBUG_TRACE, ("MlmeSetPsmBit = %d\n", psm));
-}
-#endif // CONFIG_STA_SUPPORT //
-
-
-// IRQL = DISPATCH_LEVEL
-VOID MlmeSetTxPreamble(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT TxPreamble)
-{
-	AUTO_RSP_CFG_STRUC csr4;
-
-	//
-	// Always use Long preamble before verifiation short preamble functionality works well.
-	// Todo: remove the following line if short preamble functionality works
-	//
-	//TxPreamble = Rt802_11PreambleLong;
-
-	RTMP_IO_READ32(pAd, AUTO_RSP_CFG, &csr4.word);
-	if (TxPreamble == Rt802_11PreambleLong)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("MlmeSetTxPreamble (= LONG PREAMBLE)\n"));
-		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
-		csr4.field.AutoResponderPreamble = 0;
-	}
-	else
-	{
-		// NOTE: 1Mbps should always use long preamble
-		DBGPRINT(RT_DEBUG_TRACE, ("MlmeSetTxPreamble (= SHORT PREAMBLE)\n"));
-		OPSTATUS_SET_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
-		csr4.field.AutoResponderPreamble = 1;
-	}
-
-	RTMP_IO_WRITE32(pAd, AUTO_RSP_CFG, csr4.word);
-}
-
-/*
-    ==========================================================================
-    Description:
-        Update basic rate bitmap
-    ==========================================================================
- */
-
-VOID UpdateBasicRateBitmap(
-    IN  PRTMP_ADAPTER   pAdapter)
-{
-    INT  i, j;
-                  /* 1  2  5.5, 11,  6,  9, 12, 18, 24, 36, 48,  54 */
-    UCHAR rate[] = { 2, 4,  11, 22, 12, 18, 24, 36, 48, 72, 96, 108 };
-    UCHAR *sup_p = pAdapter->CommonCfg.SupRate;
-    UCHAR *ext_p = pAdapter->CommonCfg.ExtRate;
-    ULONG bitmap = pAdapter->CommonCfg.BasicRateBitmap;
-
-
-    /* if A mode, always use fix BasicRateBitMap */
-    //if (pAdapter->CommonCfg.Channel == PHY_11A)
-	if (pAdapter->CommonCfg.Channel > 14)
-        pAdapter->CommonCfg.BasicRateBitmap = 0x150; /* 6, 12, 24M */
-    /* End of if */
-
-    if (pAdapter->CommonCfg.BasicRateBitmap > 4095)
-    {
-        /* (2 ^ MAX_LEN_OF_SUPPORTED_RATES) -1 */
-        return;
-    } /* End of if */
-
-    for(i=0; i<MAX_LEN_OF_SUPPORTED_RATES; i++)
-    {
-        sup_p[i] &= 0x7f;
-        ext_p[i] &= 0x7f;
-    } /* End of for */
-
-    for(i=0; i<MAX_LEN_OF_SUPPORTED_RATES; i++)
-    {
-        if (bitmap & (1 << i))
-        {
-            for(j=0; j<MAX_LEN_OF_SUPPORTED_RATES; j++)
-            {
-                if (sup_p[j] == rate[i])
-                    sup_p[j] |= 0x80;
-                /* End of if */
-            } /* End of for */
-
-            for(j=0; j<MAX_LEN_OF_SUPPORTED_RATES; j++)
-            {
-                if (ext_p[j] == rate[i])
-                    ext_p[j] |= 0x80;
-                /* End of if */
-            } /* End of for */
-        } /* End of if */
-    } /* End of for */
-} /* End of UpdateBasicRateBitmap */
-
-// IRQL = PASSIVE_LEVEL
-// IRQL = DISPATCH_LEVEL
-// bLinkUp is to identify the inital link speed.
-// TRUE indicates the rate update at linkup, we should not try to set the rate at 54Mbps.
-VOID MlmeUpdateTxRates(
-	IN PRTMP_ADAPTER 		pAd,
-	IN 	BOOLEAN		 		bLinkUp,
-	IN	UCHAR				apidx)
-{
-	int i, num;
-	UCHAR Rate = RATE_6, MaxDesire = RATE_1, MaxSupport = RATE_1;
-	UCHAR MinSupport = RATE_54;
-	ULONG BasicRateBitmap = 0;
-	UCHAR CurrBasicRate = RATE_1;
-	UCHAR *pSupRate, SupRateLen, *pExtRate, ExtRateLen;
-	PHTTRANSMIT_SETTING		pHtPhy = NULL;
-	PHTTRANSMIT_SETTING		pMaxHtPhy = NULL;
-	PHTTRANSMIT_SETTING		pMinHtPhy = NULL;
-	BOOLEAN 				*auto_rate_cur_p;
-	UCHAR					HtMcs = MCS_AUTO;
-
-	// find max desired rate
-	UpdateBasicRateBitmap(pAd);
-
-	num = 0;
-	auto_rate_cur_p = NULL;
-	for (i=0; i<MAX_LEN_OF_SUPPORTED_RATES; i++)
-	{
-		switch (pAd->CommonCfg.DesireRate[i] & 0x7f)
-		{
-			case 2:  Rate = RATE_1;   num++;   break;
-			case 4:  Rate = RATE_2;   num++;   break;
-			case 11: Rate = RATE_5_5; num++;   break;
-			case 22: Rate = RATE_11;  num++;   break;
-			case 12: Rate = RATE_6;   num++;   break;
-			case 18: Rate = RATE_9;   num++;   break;
-			case 24: Rate = RATE_12;  num++;   break;
-			case 36: Rate = RATE_18;  num++;   break;
-			case 48: Rate = RATE_24;  num++;   break;
-			case 72: Rate = RATE_36;  num++;   break;
-			case 96: Rate = RATE_48;  num++;   break;
-			case 108: Rate = RATE_54; num++;   break;
-			//default: Rate = RATE_1;   break;
-		}
-		if (MaxDesire < Rate)  MaxDesire = Rate;
-	}
-
-//===========================================================================
-//===========================================================================
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		pHtPhy 		= &pAd->StaCfg.HTPhyMode;
-		pMaxHtPhy	= &pAd->StaCfg.MaxHTPhyMode;
-		pMinHtPhy	= &pAd->StaCfg.MinHTPhyMode;
-
-		auto_rate_cur_p = &pAd->StaCfg.bAutoTxRateSwitch;
-		HtMcs 		= pAd->StaCfg.DesiredTransmitSetting.field.MCS;
-
-		if ((pAd->StaCfg.BssType == BSS_ADHOC) &&
-			(pAd->CommonCfg.PhyMode == PHY_11B) &&
-			(MaxDesire > RATE_11))
-		{
-			MaxDesire = RATE_11;
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	pAd->CommonCfg.MaxDesiredRate = MaxDesire;
-	pMinHtPhy->word = 0;
-	pMaxHtPhy->word = 0;
-	pHtPhy->word = 0;
-
-	// Auto rate switching is enabled only if more than one DESIRED RATES are
-	// specified; otherwise disabled
-	if (num <= 1)
-	{
-		//OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED);
-		//pAd->CommonCfg.bAutoTxRateSwitch	= FALSE;
-		*auto_rate_cur_p = FALSE;
-	}
-	else
-	{
-		//OPSTATUS_SET_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED);
-		//pAd->CommonCfg.bAutoTxRateSwitch	= TRUE;
-		*auto_rate_cur_p = TRUE;
-	}
-
-#if 1
-	if (HtMcs != MCS_AUTO)
-	{
-		//OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED);
-		//pAd->CommonCfg.bAutoTxRateSwitch	= FALSE;
-		*auto_rate_cur_p = FALSE;
-	}
-	else
-	{
-		//OPSTATUS_SET_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED);
-		//pAd->CommonCfg.bAutoTxRateSwitch	= TRUE;
-		*auto_rate_cur_p = TRUE;
-	}
-#endif
-
-#ifdef CONFIG_STA_SUPPORT
-	if ((ADHOC_ON(pAd) || INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA))
-	{
-		pSupRate = &pAd->StaActive.SupRate[0];
-		pExtRate = &pAd->StaActive.ExtRate[0];
-		SupRateLen = pAd->StaActive.SupRateLen;
-		ExtRateLen = pAd->StaActive.ExtRateLen;
-	}
-	else
-#endif // CONFIG_STA_SUPPORT //
-	{
-		pSupRate = &pAd->CommonCfg.SupRate[0];
-		pExtRate = &pAd->CommonCfg.ExtRate[0];
-		SupRateLen = pAd->CommonCfg.SupRateLen;
-		ExtRateLen = pAd->CommonCfg.ExtRateLen;
-	}
-
-	// find max supported rate
-	for (i=0; i<SupRateLen; i++)
-	{
-		switch (pSupRate[i] & 0x7f)
-		{
-			case 2:   Rate = RATE_1;	if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0001;	 break;
-			case 4:   Rate = RATE_2;	if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0002;	 break;
-			case 11:  Rate = RATE_5_5;	if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0004;	 break;
-			case 22:  Rate = RATE_11;	if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0008;	 break;
-			case 12:  Rate = RATE_6;	/*if (pSupRate[i] & 0x80)*/  BasicRateBitmap |= 0x0010;  break;
-			case 18:  Rate = RATE_9;	if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0020;	 break;
-			case 24:  Rate = RATE_12;	/*if (pSupRate[i] & 0x80)*/  BasicRateBitmap |= 0x0040;  break;
-			case 36:  Rate = RATE_18;	if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0080;	 break;
-			case 48:  Rate = RATE_24;	/*if (pSupRate[i] & 0x80)*/  BasicRateBitmap |= 0x0100;  break;
-			case 72:  Rate = RATE_36;	if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0200;	 break;
-			case 96:  Rate = RATE_48;	if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0400;	 break;
-			case 108: Rate = RATE_54;	if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0800;	 break;
-			default:  Rate = RATE_1;	break;
-		}
-		if (MaxSupport < Rate)	MaxSupport = Rate;
-
-		if (MinSupport > Rate) MinSupport = Rate;
-	}
-
-	for (i=0; i<ExtRateLen; i++)
-	{
-		switch (pExtRate[i] & 0x7f)
-		{
-			case 2:   Rate = RATE_1;	if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0001;	 break;
-			case 4:   Rate = RATE_2;	if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0002;	 break;
-			case 11:  Rate = RATE_5_5;	if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0004;	 break;
-			case 22:  Rate = RATE_11;	if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0008;	 break;
-			case 12:  Rate = RATE_6;	/*if (pExtRate[i] & 0x80)*/  BasicRateBitmap |= 0x0010;  break;
-			case 18:  Rate = RATE_9;	if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0020;	 break;
-			case 24:  Rate = RATE_12;	/*if (pExtRate[i] & 0x80)*/  BasicRateBitmap |= 0x0040;  break;
-			case 36:  Rate = RATE_18;	if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0080;	 break;
-			case 48:  Rate = RATE_24;	/*if (pExtRate[i] & 0x80)*/  BasicRateBitmap |= 0x0100;  break;
-			case 72:  Rate = RATE_36;	if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0200;	 break;
-			case 96:  Rate = RATE_48;	if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0400;	 break;
-			case 108: Rate = RATE_54;	if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0800;	 break;
-			default:  Rate = RATE_1;	break;
-		}
-		if (MaxSupport < Rate)	MaxSupport = Rate;
-
-		if (MinSupport > Rate) MinSupport = Rate;
-	}
-
-	RTMP_IO_WRITE32(pAd, LEGACY_BASIC_RATE, BasicRateBitmap);
-
-	// bug fix
-	// pAd->CommonCfg.BasicRateBitmap = BasicRateBitmap;
-
-	// calculate the exptected ACK rate for each TX rate. This info is used to caculate
-	// the DURATION field of outgoing uniicast DATA/MGMT frame
-	for (i=0; i<MAX_LEN_OF_SUPPORTED_RATES; i++)
-	{
-		if (BasicRateBitmap & (0x01 << i))
-			CurrBasicRate = (UCHAR)i;
-		pAd->CommonCfg.ExpectedACKRate[i] = CurrBasicRate;
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE,("MlmeUpdateTxRates[MaxSupport = %d] = MaxDesire %d Mbps\n", RateIdToMbps[MaxSupport], RateIdToMbps[MaxDesire]));
-	// max tx rate = min {max desire rate, max supported rate}
-	if (MaxSupport < MaxDesire)
-		pAd->CommonCfg.MaxTxRate = MaxSupport;
-	else
-		pAd->CommonCfg.MaxTxRate = MaxDesire;
-
-	pAd->CommonCfg.MinTxRate = MinSupport;
-	// 2003-07-31 john - 2500 doesn't have good sensitivity at high OFDM rates. to increase the success
-	// ratio of initial DHCP packet exchange, TX rate starts from a lower rate depending
-	// on average RSSI
-	//	 1. RSSI >= -70db, start at 54 Mbps (short distance)
-	//	 2. -70 > RSSI >= -75, start at 24 Mbps (mid distance)
-	//	 3. -75 > RSSI, start at 11 Mbps (long distance)
-	//if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED)/* &&
-	//	OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)*/)
-	if (*auto_rate_cur_p)
-	{
-		short dbm = 0;
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			dbm = pAd->StaCfg.RssiSample.AvgRssi0 - pAd->BbpRssiToDbmDelta;
-#endif // CONFIG_STA_SUPPORT //
-		if (bLinkUp == TRUE)
-			pAd->CommonCfg.TxRate = RATE_24;
-		else
-			pAd->CommonCfg.TxRate = pAd->CommonCfg.MaxTxRate;
-
-		if (dbm < -75)
-			pAd->CommonCfg.TxRate = RATE_11;
-		else if (dbm < -70)
-			pAd->CommonCfg.TxRate = RATE_24;
-
-		// should never exceed MaxTxRate (consider 11B-only mode)
-		if (pAd->CommonCfg.TxRate > pAd->CommonCfg.MaxTxRate)
-			pAd->CommonCfg.TxRate = pAd->CommonCfg.MaxTxRate;
-
-		pAd->CommonCfg.TxRateIndex = 0;
-	}
-	else
-	{
-		pAd->CommonCfg.TxRate = pAd->CommonCfg.MaxTxRate;
-		pHtPhy->field.MCS	= (pAd->CommonCfg.MaxTxRate > 3) ? (pAd->CommonCfg.MaxTxRate - 4) : pAd->CommonCfg.MaxTxRate;
-		pHtPhy->field.MODE	= (pAd->CommonCfg.MaxTxRate > 3) ? MODE_OFDM : MODE_CCK;
-
-		pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.STBC	= pHtPhy->field.STBC;
-		pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.ShortGI	= pHtPhy->field.ShortGI;
-		pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MCS		= pHtPhy->field.MCS;
-		pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE	= pHtPhy->field.MODE;
-	}
-
-	if (pAd->CommonCfg.TxRate <= RATE_11)
-	{
-		pMaxHtPhy->field.MODE = MODE_CCK;
-		pMaxHtPhy->field.MCS = pAd->CommonCfg.TxRate;
-		pMinHtPhy->field.MCS = pAd->CommonCfg.MinTxRate;
-	}
-	else
-	{
-		pMaxHtPhy->field.MODE = MODE_OFDM;
-		pMaxHtPhy->field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.TxRate];
-		if (pAd->CommonCfg.MinTxRate >= RATE_6 && (pAd->CommonCfg.MinTxRate <= RATE_54))
-			{pMinHtPhy->field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MinTxRate];}
-		else
-			{pMinHtPhy->field.MCS = pAd->CommonCfg.MinTxRate;}
-	}
-
-	pHtPhy->word = (pMaxHtPhy->word);
-	if (bLinkUp && (pAd->OpMode == OPMODE_STA))
-	{
-			pAd->MacTab.Content[BSSID_WCID].HTPhyMode.word = pHtPhy->word;
-			pAd->MacTab.Content[BSSID_WCID].MaxHTPhyMode.word = pMaxHtPhy->word;
-			pAd->MacTab.Content[BSSID_WCID].MinHTPhyMode.word = pMinHtPhy->word;
-	}
-	else
-	{
-		switch (pAd->CommonCfg.PhyMode)
-		{
-			case PHY_11BG_MIXED:
-			case PHY_11B:
-#ifdef DOT11_N_SUPPORT
-			case PHY_11BGN_MIXED:
-#endif // DOT11_N_SUPPORT //
-				pAd->CommonCfg.MlmeRate = RATE_1;
-				pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK;
-				pAd->CommonCfg.MlmeTransmit.field.MCS = RATE_1;
-
-//#ifdef	WIFI_TEST
-				pAd->CommonCfg.RtsRate = RATE_11;
-//#else
-//				pAd->CommonCfg.RtsRate = RATE_1;
-//#endif
-				break;
-			case PHY_11G:
-			case PHY_11A:
-#ifdef DOT11_N_SUPPORT
-			case PHY_11AGN_MIXED:
-			case PHY_11GN_MIXED:
-			case PHY_11N_2_4G:
-			case PHY_11AN_MIXED:
-			case PHY_11N_5G:
-#endif // DOT11_N_SUPPORT //
-				pAd->CommonCfg.MlmeRate = RATE_6;
-				pAd->CommonCfg.RtsRate = RATE_6;
-				pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM;
-				pAd->CommonCfg.MlmeTransmit.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate];
-				break;
-			case PHY_11ABG_MIXED:
-#ifdef DOT11_N_SUPPORT
-			case PHY_11ABGN_MIXED:
-#endif // DOT11_N_SUPPORT //
-				if (pAd->CommonCfg.Channel <= 14)
-				{
-					pAd->CommonCfg.MlmeRate = RATE_1;
-					pAd->CommonCfg.RtsRate = RATE_1;
-					pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK;
-					pAd->CommonCfg.MlmeTransmit.field.MCS = RATE_1;
-				}
-				else
-				{
-					pAd->CommonCfg.MlmeRate = RATE_6;
-					pAd->CommonCfg.RtsRate = RATE_6;
-					pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM;
-					pAd->CommonCfg.MlmeTransmit.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate];
-				}
-				break;
-			default: // error
-				pAd->CommonCfg.MlmeRate = RATE_6;
-                        	pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM;
-				pAd->CommonCfg.MlmeTransmit.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate];
-				pAd->CommonCfg.RtsRate = RATE_1;
-				break;
-		}
-		//
-		// Keep Basic Mlme Rate.
-		//
-		pAd->MacTab.Content[MCAST_WCID].HTPhyMode.word = pAd->CommonCfg.MlmeTransmit.word;
-		if (pAd->CommonCfg.MlmeTransmit.field.MODE == MODE_OFDM)
-			pAd->MacTab.Content[MCAST_WCID].HTPhyMode.field.MCS = OfdmRateToRxwiMCS[RATE_24];
-		else
-			pAd->MacTab.Content[MCAST_WCID].HTPhyMode.field.MCS = RATE_1;
-		pAd->CommonCfg.BasicMlmeRate = pAd->CommonCfg.MlmeRate;
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, (" MlmeUpdateTxRates (MaxDesire=%d, MaxSupport=%d, MaxTxRate=%d, MinRate=%d, Rate Switching =%d)\n",
-			 RateIdToMbps[MaxDesire], RateIdToMbps[MaxSupport], RateIdToMbps[pAd->CommonCfg.MaxTxRate], RateIdToMbps[pAd->CommonCfg.MinTxRate],
-			 /*OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED)*/*auto_rate_cur_p));
-	DBGPRINT(RT_DEBUG_TRACE, (" MlmeUpdateTxRates (TxRate=%d, RtsRate=%d, BasicRateBitmap=0x%04lx)\n",
-			 RateIdToMbps[pAd->CommonCfg.TxRate], RateIdToMbps[pAd->CommonCfg.RtsRate], BasicRateBitmap));
-	DBGPRINT(RT_DEBUG_TRACE, ("MlmeUpdateTxRates (MlmeTransmit=0x%x, MinHTPhyMode=%x, MaxHTPhyMode=0x%x, HTPhyMode=0x%x)\n",
-			 pAd->CommonCfg.MlmeTransmit.word, pAd->MacTab.Content[BSSID_WCID].MinHTPhyMode.word ,pAd->MacTab.Content[BSSID_WCID].MaxHTPhyMode.word ,pAd->MacTab.Content[BSSID_WCID].HTPhyMode.word ));
-}
-
-#ifdef DOT11_N_SUPPORT
-/*
-	==========================================================================
-	Description:
-		This function update HT Rate setting.
-		Input Wcid value is valid for 2 case :
-		1. it's used for Station in infra mode that copy AP rate to Mactable.
-		2. OR Station 	in adhoc mode to copy peer's HT rate to Mactable.
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID MlmeUpdateHtTxRates(
-	IN PRTMP_ADAPTER 		pAd,
-	IN	UCHAR				apidx)
-{
-	UCHAR	StbcMcs; //j, StbcMcs, bitmask;
-	CHAR 	i; // 3*3
-	RT_HT_CAPABILITY 	*pRtHtCap = NULL;
-	RT_HT_PHY_INFO		*pActiveHtPhy = NULL;
-	ULONG		BasicMCS;
-	UCHAR j, bitmask;
-	PRT_HT_PHY_INFO			pDesireHtPhy = NULL;
-	PHTTRANSMIT_SETTING		pHtPhy = NULL;
-	PHTTRANSMIT_SETTING		pMaxHtPhy = NULL;
-	PHTTRANSMIT_SETTING		pMinHtPhy = NULL;
-	BOOLEAN 				*auto_rate_cur_p;
-
-	DBGPRINT(RT_DEBUG_TRACE,("MlmeUpdateHtTxRates===> \n"));
-
-	auto_rate_cur_p = NULL;
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		pDesireHtPhy	= &pAd->StaCfg.DesiredHtPhyInfo;
-		pActiveHtPhy	= &pAd->StaCfg.DesiredHtPhyInfo;
-		pHtPhy 		= &pAd->StaCfg.HTPhyMode;
-		pMaxHtPhy	= &pAd->StaCfg.MaxHTPhyMode;
-		pMinHtPhy	= &pAd->StaCfg.MinHTPhyMode;
-
-		auto_rate_cur_p = &pAd->StaCfg.bAutoTxRateSwitch;
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef CONFIG_STA_SUPPORT
-	if ((ADHOC_ON(pAd) || INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA))
-	{
-		if (pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE)
-			return;
-
-		pRtHtCap = &pAd->StaActive.SupportedHtPhy;
-		pActiveHtPhy = &pAd->StaActive.SupportedPhyInfo;
-		StbcMcs = (UCHAR)pAd->MlmeAux.AddHtInfo.AddHtInfo3.StbcMcs;
-		BasicMCS =pAd->MlmeAux.AddHtInfo.MCSSet[0]+(pAd->MlmeAux.AddHtInfo.MCSSet[1]<<8)+(StbcMcs<<16);
-		if ((pAd->CommonCfg.DesiredHtPhy.TxSTBC) && (pRtHtCap->RxSTBC) && (pAd->Antenna.field.TxPath == 2))
-			pMaxHtPhy->field.STBC = STBC_USE;
-		else
-			pMaxHtPhy->field.STBC = STBC_NONE;
-	}
-	else
-#endif // CONFIG_STA_SUPPORT //
-	{
-		if (pDesireHtPhy->bHtEnable == FALSE)
-			return;
-
-		pRtHtCap = &pAd->CommonCfg.DesiredHtPhy;
-		StbcMcs = (UCHAR)pAd->CommonCfg.AddHTInfo.AddHtInfo3.StbcMcs;
-		BasicMCS = pAd->CommonCfg.AddHTInfo.MCSSet[0]+(pAd->CommonCfg.AddHTInfo.MCSSet[1]<<8)+(StbcMcs<<16);
-		if ((pAd->CommonCfg.DesiredHtPhy.TxSTBC) && (pRtHtCap->RxSTBC) && (pAd->Antenna.field.TxPath == 2))
-			pMaxHtPhy->field.STBC = STBC_USE;
-		else
-			pMaxHtPhy->field.STBC = STBC_NONE;
-	}
-
-	// Decide MAX ht rate.
-	if ((pRtHtCap->GF) && (pAd->CommonCfg.DesiredHtPhy.GF))
-		pMaxHtPhy->field.MODE = MODE_HTGREENFIELD;
-	else
-		pMaxHtPhy->field.MODE = MODE_HTMIX;
-
-    if ((pAd->CommonCfg.DesiredHtPhy.ChannelWidth) && (pRtHtCap->ChannelWidth))
-		pMaxHtPhy->field.BW = BW_40;
-	else
-		pMaxHtPhy->field.BW = BW_20;
-
-    if (pMaxHtPhy->field.BW == BW_20)
-		pMaxHtPhy->field.ShortGI = (pAd->CommonCfg.DesiredHtPhy.ShortGIfor20 & pRtHtCap->ShortGIfor20);
-	else
-		pMaxHtPhy->field.ShortGI = (pAd->CommonCfg.DesiredHtPhy.ShortGIfor40 & pRtHtCap->ShortGIfor40);
-
-	for (i=23; i>=0; i--) // 3*3
-	{
-		j = i/8;
-		bitmask = (1<<(i-(j*8)));
-
-		if ((pActiveHtPhy->MCSSet[j] & bitmask) && (pDesireHtPhy->MCSSet[j] & bitmask))
-		{
-			pMaxHtPhy->field.MCS = i;
-			break;
-		}
-
-		if (i==0)
-			break;
-	}
-
-	// Copy MIN ht rate.  rt2860???
-	pMinHtPhy->field.BW = BW_20;
-	pMinHtPhy->field.MCS = 0;
-	pMinHtPhy->field.STBC = 0;
-	pMinHtPhy->field.ShortGI = 0;
-	//If STA assigns fixed rate. update to fixed here.
-#ifdef CONFIG_STA_SUPPORT
-	if ( (pAd->OpMode == OPMODE_STA) && (pDesireHtPhy->MCSSet[0] != 0xff))
-	{
-		if (pDesireHtPhy->MCSSet[4] != 0)
-		{
-			pMaxHtPhy->field.MCS = 32;
-			pMinHtPhy->field.MCS = 32;
-			DBGPRINT(RT_DEBUG_TRACE,("MlmeUpdateHtTxRates<=== Use Fixed MCS = %d\n",pMinHtPhy->field.MCS));
-		}
-
-		for (i=23; (CHAR)i >= 0; i--) // 3*3
-		{
-			j = i/8;
-			bitmask = (1<<(i-(j*8)));
-			if ( (pDesireHtPhy->MCSSet[j] & bitmask) && (pActiveHtPhy->MCSSet[j] & bitmask))
-			{
-				pMaxHtPhy->field.MCS = i;
-				pMinHtPhy->field.MCS = i;
-				break;
-			}
-			if (i==0)
-				break;
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-
-	// Decide ht rate
-	pHtPhy->field.STBC = pMaxHtPhy->field.STBC;
-	pHtPhy->field.BW = pMaxHtPhy->field.BW;
-	pHtPhy->field.MODE = pMaxHtPhy->field.MODE;
-	pHtPhy->field.MCS = pMaxHtPhy->field.MCS;
-	pHtPhy->field.ShortGI = pMaxHtPhy->field.ShortGI;
-
-	// use default now. rt2860
-	if (pDesireHtPhy->MCSSet[0] != 0xff)
-		*auto_rate_cur_p = FALSE;
-	else
-		*auto_rate_cur_p = TRUE;
-
-	DBGPRINT(RT_DEBUG_TRACE, (" MlmeUpdateHtTxRates<---.AMsduSize = %d  \n", pAd->CommonCfg.DesiredHtPhy.AmsduSize ));
-	DBGPRINT(RT_DEBUG_TRACE,("TX: MCS[0] = %x (choose %d), BW = %d, ShortGI = %d, MODE = %d,  \n", pActiveHtPhy->MCSSet[0],pHtPhy->field.MCS,
-		pHtPhy->field.BW, pHtPhy->field.ShortGI, pHtPhy->field.MODE));
-	DBGPRINT(RT_DEBUG_TRACE,("MlmeUpdateHtTxRates<=== \n"));
-}
-#endif // DOT11_N_SUPPORT //
-
-// IRQL = DISPATCH_LEVEL
-VOID MlmeRadioOff(
-	IN PRTMP_ADAPTER pAd)
-{
-	RT28XX_MLME_RADIO_OFF(pAd);
-}
-
-// IRQL = DISPATCH_LEVEL
-VOID MlmeRadioOn(
-	IN PRTMP_ADAPTER pAd)
-{
-	RT28XX_MLME_RADIO_ON(pAd);
-}
-
-// ===========================================================================================
-// bss_table.c
-// ===========================================================================================
-
-
-/*! \brief initialize BSS table
- *	\param p_tab pointer to the table
- *	\return none
- *	\pre
- *	\post
-
- IRQL = PASSIVE_LEVEL
- IRQL = DISPATCH_LEVEL
-
- */
-VOID BssTableInit(
-	IN BSS_TABLE *Tab)
-{
-	int i;
-
-	Tab->BssNr = 0;
-    Tab->BssOverlapNr = 0;
-	for (i = 0; i < MAX_LEN_OF_BSS_TABLE; i++)
-	{
-		NdisZeroMemory(&Tab->BssEntry[i], sizeof(BSS_ENTRY));
-		Tab->BssEntry[i].Rssi = -127;	// initial the rssi as a minimum value
-	}
-}
-
-#ifdef DOT11_N_SUPPORT
-VOID BATableInit(
-	IN PRTMP_ADAPTER pAd,
-    IN BA_TABLE *Tab)
-{
-	int i;
-
-	Tab->numAsOriginator = 0;
-	Tab->numAsRecipient = 0;
-	NdisAllocateSpinLock(&pAd->BATabLock);
-	for (i = 0; i < MAX_LEN_OF_BA_REC_TABLE; i++)
-	{
-		Tab->BARecEntry[i].REC_BA_Status = Recipient_NONE;
-		NdisAllocateSpinLock(&(Tab->BARecEntry[i].RxReRingLock));
-	}
-	for (i = 0; i < MAX_LEN_OF_BA_ORI_TABLE; i++)
-	{
-		Tab->BAOriEntry[i].ORI_BA_Status = Originator_NONE;
-	}
-}
-#endif // DOT11_N_SUPPORT //
-
-/*! \brief search the BSS table by SSID
- *	\param p_tab pointer to the bss table
- *	\param ssid SSID string
- *	\return index of the table, BSS_NOT_FOUND if not in the table
- *	\pre
- *	\post
- *	\note search by sequential search
-
- IRQL = DISPATCH_LEVEL
-
- */
-ULONG BssTableSearch(
-	IN BSS_TABLE *Tab,
-	IN PUCHAR	 pBssid,
-	IN UCHAR	 Channel)
-{
-	UCHAR i;
-
-	for (i = 0; i < Tab->BssNr; i++)
-	{
-		//
-		// Some AP that support A/B/G mode that may used the same BSSID on 11A and 11B/G.
-		// We should distinguish this case.
-		//
-		if ((((Tab->BssEntry[i].Channel <= 14) && (Channel <= 14)) ||
-			 ((Tab->BssEntry[i].Channel > 14) && (Channel > 14))) &&
-			MAC_ADDR_EQUAL(Tab->BssEntry[i].Bssid, pBssid))
-		{
-			return i;
-		}
-	}
-	return (ULONG)BSS_NOT_FOUND;
-}
-
-ULONG BssSsidTableSearch(
-	IN BSS_TABLE *Tab,
-	IN PUCHAR	 pBssid,
-	IN PUCHAR	 pSsid,
-	IN UCHAR	 SsidLen,
-	IN UCHAR	 Channel)
-{
-	UCHAR i;
-
-	for (i = 0; i < Tab->BssNr; i++)
-	{
-		//
-		// Some AP that support A/B/G mode that may used the same BSSID on 11A and 11B/G.
-		// We should distinguish this case.
-		//
-		if ((((Tab->BssEntry[i].Channel <= 14) && (Channel <= 14)) ||
-			 ((Tab->BssEntry[i].Channel > 14) && (Channel > 14))) &&
-			MAC_ADDR_EQUAL(Tab->BssEntry[i].Bssid, pBssid) &&
-			SSID_EQUAL(pSsid, SsidLen, Tab->BssEntry[i].Ssid, Tab->BssEntry[i].SsidLen))
-		{
-			return i;
-		}
-	}
-	return (ULONG)BSS_NOT_FOUND;
-}
-
-ULONG BssTableSearchWithSSID(
-	IN BSS_TABLE *Tab,
-	IN PUCHAR	 Bssid,
-	IN PUCHAR	 pSsid,
-	IN UCHAR	 SsidLen,
-	IN UCHAR	 Channel)
-{
-	UCHAR i;
-
-	for (i = 0; i < Tab->BssNr; i++)
-	{
-		if ((((Tab->BssEntry[i].Channel <= 14) && (Channel <= 14)) ||
-			((Tab->BssEntry[i].Channel > 14) && (Channel > 14))) &&
-			MAC_ADDR_EQUAL(&(Tab->BssEntry[i].Bssid), Bssid) &&
-			(SSID_EQUAL(pSsid, SsidLen, Tab->BssEntry[i].Ssid, Tab->BssEntry[i].SsidLen) ||
-			(NdisEqualMemory(pSsid, ZeroSsid, SsidLen)) ||
-			(NdisEqualMemory(Tab->BssEntry[i].Ssid, ZeroSsid, Tab->BssEntry[i].SsidLen))))
-		{
-			return i;
-		}
-	}
-	return (ULONG)BSS_NOT_FOUND;
-}
-
-// IRQL = DISPATCH_LEVEL
-VOID BssTableDeleteEntry(
-	IN OUT	BSS_TABLE *Tab,
-	IN		PUCHAR	  pBssid,
-	IN		UCHAR	  Channel)
-{
-	UCHAR i, j;
-
-	for (i = 0; i < Tab->BssNr; i++)
-	{
-		if ((Tab->BssEntry[i].Channel == Channel) &&
-			(MAC_ADDR_EQUAL(Tab->BssEntry[i].Bssid, pBssid)))
-		{
-			for (j = i; j < Tab->BssNr - 1; j++)
-			{
-				NdisMoveMemory(&(Tab->BssEntry[j]), &(Tab->BssEntry[j + 1]), sizeof(BSS_ENTRY));
-			}
-			NdisZeroMemory(&(Tab->BssEntry[Tab->BssNr - 1]), sizeof(BSS_ENTRY));
-			Tab->BssNr -= 1;
-			return;
-		}
-	}
-}
-
-#ifdef DOT11_N_SUPPORT
-/*
-	========================================================================
-	Routine Description:
-		Delete the Originator Entry in BAtable. Or decrease numAs Originator by 1 if needed.
-
-	Arguments:
-	// IRQL = DISPATCH_LEVEL
-	========================================================================
-*/
-VOID BATableDeleteORIEntry(
-	IN OUT	PRTMP_ADAPTER pAd,
-	IN		BA_ORI_ENTRY	*pBAORIEntry)
-{
-
-	if (pBAORIEntry->ORI_BA_Status != Originator_NONE)
-	{
-		NdisAcquireSpinLock(&pAd->BATabLock);
-		if (pBAORIEntry->ORI_BA_Status == Originator_Done)
-		{
-			pAd->BATable.numAsOriginator -= 1;
-			DBGPRINT(RT_DEBUG_TRACE, ("BATableDeleteORIEntry numAsOriginator= %ld\n", pAd->BATable.numAsRecipient));
-			// Erase Bitmap flag.
-		}
-		pAd->MacTab.Content[pBAORIEntry->Wcid].TXBAbitmap &= (~(1<<(pBAORIEntry->TID) ));	// If STA mode,  erase flag here
-		pAd->MacTab.Content[pBAORIEntry->Wcid].BAOriWcidArray[pBAORIEntry->TID] = 0;	// If STA mode,  erase flag here
-		pBAORIEntry->ORI_BA_Status = Originator_NONE;
-		pBAORIEntry->Token = 1;
-		// Not clear Sequence here.
-		NdisReleaseSpinLock(&pAd->BATabLock);
-	}
-}
-#endif // DOT11_N_SUPPORT //
-
-/*! \brief
- *	\param
- *	\return
- *	\pre
- *	\post
-
- IRQL = DISPATCH_LEVEL
-
- */
-VOID BssEntrySet(
-	IN PRTMP_ADAPTER	pAd,
-	OUT BSS_ENTRY *pBss,
-	IN PUCHAR pBssid,
-	IN CHAR Ssid[],
-	IN UCHAR SsidLen,
-	IN UCHAR BssType,
-	IN USHORT BeaconPeriod,
-	IN PCF_PARM pCfParm,
-	IN USHORT AtimWin,
-	IN USHORT CapabilityInfo,
-	IN UCHAR SupRate[],
-	IN UCHAR SupRateLen,
-	IN UCHAR ExtRate[],
-	IN UCHAR ExtRateLen,
-	IN HT_CAPABILITY_IE *pHtCapability,
-	IN ADD_HT_INFO_IE *pAddHtInfo,	// AP might use this additional ht info IE
-	IN UCHAR			HtCapabilityLen,
-	IN UCHAR			AddHtInfoLen,
-	IN UCHAR			NewExtChanOffset,
-	IN UCHAR Channel,
-	IN CHAR Rssi,
-	IN LARGE_INTEGER TimeStamp,
-	IN UCHAR CkipFlag,
-	IN PEDCA_PARM pEdcaParm,
-	IN PQOS_CAPABILITY_PARM pQosCapability,
-	IN PQBSS_LOAD_PARM pQbssLoad,
-	IN USHORT LengthVIE,
-	IN PNDIS_802_11_VARIABLE_IEs pVIE)
-{
-	COPY_MAC_ADDR(pBss->Bssid, pBssid);
-	// Default Hidden SSID to be TRUE, it will be turned to FALSE after coping SSID
-	pBss->Hidden = 1;
-	if (SsidLen > 0)
-	{
-		// For hidden SSID AP, it might send beacon with SSID len equal to 0
-		// Or send beacon /probe response with SSID len matching real SSID length,
-		// but SSID is all zero. such as "00-00-00-00" with length 4.
-		// We have to prevent this case overwrite correct table
-		if (NdisEqualMemory(Ssid, ZeroSsid, SsidLen) == 0)
-		{
-		    NdisZeroMemory(pBss->Ssid, MAX_LEN_OF_SSID);
-			NdisMoveMemory(pBss->Ssid, Ssid, SsidLen);
-			pBss->SsidLen = SsidLen;
-			pBss->Hidden = 0;
-		}
-	}
-	else
-		pBss->SsidLen = 0;
-	pBss->BssType = BssType;
-	pBss->BeaconPeriod = BeaconPeriod;
-	if (BssType == BSS_INFRA)
-	{
-		if (pCfParm->bValid)
-		{
-			pBss->CfpCount = pCfParm->CfpCount;
-			pBss->CfpPeriod = pCfParm->CfpPeriod;
-			pBss->CfpMaxDuration = pCfParm->CfpMaxDuration;
-			pBss->CfpDurRemaining = pCfParm->CfpDurRemaining;
-		}
-	}
-	else
-	{
-		pBss->AtimWin = AtimWin;
-	}
-
-	pBss->CapabilityInfo = CapabilityInfo;
-	// The privacy bit indicate security is ON, it maight be WEP, TKIP or AES
-	// Combine with AuthMode, they will decide the connection methods.
-	pBss->Privacy = CAP_IS_PRIVACY_ON(pBss->CapabilityInfo);
-	ASSERT(SupRateLen <= MAX_LEN_OF_SUPPORTED_RATES);
-	if (SupRateLen <= MAX_LEN_OF_SUPPORTED_RATES)
-		NdisMoveMemory(pBss->SupRate, SupRate, SupRateLen);
-	else
-		NdisMoveMemory(pBss->SupRate, SupRate, MAX_LEN_OF_SUPPORTED_RATES);
-	pBss->SupRateLen = SupRateLen;
-	ASSERT(ExtRateLen <= MAX_LEN_OF_SUPPORTED_RATES);
-	NdisMoveMemory(pBss->ExtRate, ExtRate, ExtRateLen);
-	NdisMoveMemory(&pBss->HtCapability, pHtCapability, HtCapabilityLen);
-	NdisMoveMemory(&pBss->AddHtInfo, pAddHtInfo, AddHtInfoLen);
-	pBss->NewExtChanOffset = NewExtChanOffset;
-	pBss->ExtRateLen = ExtRateLen;
-	pBss->Channel = Channel;
-	pBss->CentralChannel = Channel;
-	pBss->Rssi = Rssi;
-	// Update CkipFlag. if not exists, the value is 0x0
-	pBss->CkipFlag = CkipFlag;
-
-	// New for microsoft Fixed IEs
-	NdisMoveMemory(pBss->FixIEs.Timestamp, &TimeStamp, 8);
-	pBss->FixIEs.BeaconInterval = BeaconPeriod;
-	pBss->FixIEs.Capabilities = CapabilityInfo;
-
-	// New for microsoft Variable IEs
-	if (LengthVIE != 0)
-	{
-		pBss->VarIELen = LengthVIE;
-		NdisMoveMemory(pBss->VarIEs, pVIE, pBss->VarIELen);
-	}
-	else
-	{
-		pBss->VarIELen = 0;
-	}
-
-	pBss->AddHtInfoLen = 0;
-	pBss->HtCapabilityLen = 0;
-#ifdef DOT11_N_SUPPORT
-	if (HtCapabilityLen> 0)
-	{
-		pBss->HtCapabilityLen = HtCapabilityLen;
-		NdisMoveMemory(&pBss->HtCapability, pHtCapability, HtCapabilityLen);
-		if (AddHtInfoLen > 0)
-		{
-			pBss->AddHtInfoLen = AddHtInfoLen;
-			NdisMoveMemory(&pBss->AddHtInfo, pAddHtInfo, AddHtInfoLen);
-
-	 			if ((pAddHtInfo->ControlChan > 2)&& (pAddHtInfo->AddHtInfo.ExtChanOffset == EXTCHA_BELOW) && (pHtCapability->HtCapInfo.ChannelWidth == BW_40))
-	 			{
-	 				pBss->CentralChannel = pAddHtInfo->ControlChan - 2;
-	 			}
-	 			else if ((pAddHtInfo->AddHtInfo.ExtChanOffset == EXTCHA_ABOVE) && (pHtCapability->HtCapInfo.ChannelWidth == BW_40))
-				{
-		 				pBss->CentralChannel = pAddHtInfo->ControlChan + 2;
-				}
-		}
-	}
-#endif // DOT11_N_SUPPORT //
-
-	BssCipherParse(pBss);
-
-	// new for QOS
-	if (pEdcaParm)
-		NdisMoveMemory(&pBss->EdcaParm, pEdcaParm, sizeof(EDCA_PARM));
-	else
-		pBss->EdcaParm.bValid = FALSE;
-	if (pQosCapability)
-		NdisMoveMemory(&pBss->QosCapability, pQosCapability, sizeof(QOS_CAPABILITY_PARM));
-	else
-		pBss->QosCapability.bValid = FALSE;
-	if (pQbssLoad)
-		NdisMoveMemory(&pBss->QbssLoad, pQbssLoad, sizeof(QBSS_LOAD_PARM));
-	else
-		pBss->QbssLoad.bValid = FALSE;
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		PEID_STRUCT     pEid;
-		USHORT          Length = 0;
-
-
-		NdisZeroMemory(&pBss->WpaIE.IE[0], MAX_CUSTOM_LEN);
-		NdisZeroMemory(&pBss->RsnIE.IE[0], MAX_CUSTOM_LEN);
-#ifdef EXT_BUILD_CHANNEL_LIST
-		NdisZeroMemory(&pBss->CountryString[0], 3);
-		pBss->bHasCountryIE = FALSE;
-#endif // EXT_BUILD_CHANNEL_LIST //
-		pEid = (PEID_STRUCT) pVIE;
-		while ((Length + 2 + (USHORT)pEid->Len) <= LengthVIE)
-		{
-			switch(pEid->Eid)
-			{
-				case IE_WPA:
-					if (NdisEqualMemory(pEid->Octet, WPA_OUI, 4))
-					{
-						if ((pEid->Len + 2) > MAX_CUSTOM_LEN)
-						{
-							pBss->WpaIE.IELen = 0;
-							break;
-						}
-						pBss->WpaIE.IELen = pEid->Len + 2;
-						NdisMoveMemory(pBss->WpaIE.IE, pEid, pBss->WpaIE.IELen);
-					}
-					break;
-                case IE_RSN:
-                    if (NdisEqualMemory(pEid->Octet + 2, RSN_OUI, 3))
-					{
-						if ((pEid->Len + 2) > MAX_CUSTOM_LEN)
-						{
-							pBss->RsnIE.IELen = 0;
-							break;
-						}
-						pBss->RsnIE.IELen = pEid->Len + 2;
-						NdisMoveMemory(pBss->RsnIE.IE, pEid, pBss->RsnIE.IELen);
-			}
-				break;
-#ifdef EXT_BUILD_CHANNEL_LIST
-				case IE_COUNTRY:
-					NdisMoveMemory(&pBss->CountryString[0], pEid->Octet, 3);
-					pBss->bHasCountryIE = TRUE;
-					break;
-#endif // EXT_BUILD_CHANNEL_LIST //
-            }
-			Length = Length + 2 + (USHORT)pEid->Len;  // Eid[1] + Len[1]+ content[Len]
-			pEid = (PEID_STRUCT)((UCHAR*)pEid + 2 + pEid->Len);
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-}
-
-/*!
- *	\brief insert an entry into the bss table
- *	\param p_tab The BSS table
- *	\param Bssid BSSID
- *	\param ssid SSID
- *	\param ssid_len Length of SSID
- *	\param bss_type
- *	\param beacon_period
- *	\param timestamp
- *	\param p_cf
- *	\param atim_win
- *	\param cap
- *	\param rates
- *	\param rates_len
- *	\param channel_idx
- *	\return none
- *	\pre
- *	\post
- *	\note If SSID is identical, the old entry will be replaced by the new one
-
- IRQL = DISPATCH_LEVEL
-
- */
-ULONG BssTableSetEntry(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT BSS_TABLE *Tab,
-	IN PUCHAR pBssid,
-	IN CHAR Ssid[],
-	IN UCHAR SsidLen,
-	IN UCHAR BssType,
-	IN USHORT BeaconPeriod,
-	IN CF_PARM *CfParm,
-	IN USHORT AtimWin,
-	IN USHORT CapabilityInfo,
-	IN UCHAR SupRate[],
-	IN UCHAR SupRateLen,
-	IN UCHAR ExtRate[],
-	IN UCHAR ExtRateLen,
-	IN HT_CAPABILITY_IE *pHtCapability,
-	IN ADD_HT_INFO_IE *pAddHtInfo,	// AP might use this additional ht info IE
-	IN UCHAR			HtCapabilityLen,
-	IN UCHAR			AddHtInfoLen,
-	IN UCHAR			NewExtChanOffset,
-	IN UCHAR ChannelNo,
-	IN CHAR Rssi,
-	IN LARGE_INTEGER TimeStamp,
-	IN UCHAR CkipFlag,
-	IN PEDCA_PARM pEdcaParm,
-	IN PQOS_CAPABILITY_PARM pQosCapability,
-	IN PQBSS_LOAD_PARM pQbssLoad,
-	IN USHORT LengthVIE,
-	IN PNDIS_802_11_VARIABLE_IEs pVIE)
-{
-	ULONG	Idx;
-
-	Idx = BssTableSearchWithSSID(Tab, pBssid,  Ssid, SsidLen, ChannelNo);
-	if (Idx == BSS_NOT_FOUND)
-	{
-		if (Tab->BssNr >= MAX_LEN_OF_BSS_TABLE)
-	    {
-			//
-			// It may happen when BSS Table was full.
-			// The desired AP will not be added into BSS Table
-			// In this case, if we found the desired AP then overwrite BSS Table.
-			//
-			if(!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
-			{
-				if (MAC_ADDR_EQUAL(pAd->MlmeAux.Bssid, pBssid) ||
-					SSID_EQUAL(pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen, Ssid, SsidLen))
-				{
-					Idx = Tab->BssOverlapNr;
-					BssEntrySet(pAd, &Tab->BssEntry[Idx], pBssid, Ssid, SsidLen, BssType, BeaconPeriod, CfParm, AtimWin,
-						CapabilityInfo, SupRate, SupRateLen, ExtRate, ExtRateLen,pHtCapability, pAddHtInfo,HtCapabilityLen, AddHtInfoLen,
-						NewExtChanOffset, ChannelNo, Rssi, TimeStamp, CkipFlag, pEdcaParm, pQosCapability, pQbssLoad, LengthVIE, pVIE);
-                    Tab->BssOverlapNr = (Tab->BssOverlapNr++) % MAX_LEN_OF_BSS_TABLE;
-				}
-				return Idx;
-			}
-			else
-			{
-			return BSS_NOT_FOUND;
-			}
-		}
-		Idx = Tab->BssNr;
-		BssEntrySet(pAd, &Tab->BssEntry[Idx], pBssid, Ssid, SsidLen, BssType, BeaconPeriod, CfParm, AtimWin,
-					CapabilityInfo, SupRate, SupRateLen, ExtRate, ExtRateLen,pHtCapability, pAddHtInfo,HtCapabilityLen, AddHtInfoLen,
-					NewExtChanOffset, ChannelNo, Rssi, TimeStamp, CkipFlag, pEdcaParm, pQosCapability, pQbssLoad, LengthVIE, pVIE);
-		Tab->BssNr++;
-	}
-	else
-	{
-		BssEntrySet(pAd, &Tab->BssEntry[Idx], pBssid, Ssid, SsidLen, BssType, BeaconPeriod,CfParm, AtimWin,
-					CapabilityInfo, SupRate, SupRateLen, ExtRate, ExtRateLen,pHtCapability, pAddHtInfo,HtCapabilityLen, AddHtInfoLen,
-					NewExtChanOffset, ChannelNo, Rssi, TimeStamp, CkipFlag, pEdcaParm, pQosCapability, pQbssLoad, LengthVIE, pVIE);
-	}
-
-	return Idx;
-}
-
-#ifdef CONFIG_STA_SUPPORT
-#ifdef DOT11_N_SUPPORT
-#ifdef DOT11N_DRAFT3
-VOID  TriEventInit(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	UCHAR		i;
-
-	for (i = 0;i < MAX_TRIGGER_EVENT;i++)
-		pAd->CommonCfg.TriggerEventTab.EventA[i].bValid = FALSE;
-
-	pAd->CommonCfg.TriggerEventTab.EventANo = 0;
-	pAd->CommonCfg.TriggerEventTab.EventBCountDown = 0;
-}
-
-ULONG TriEventTableSetEntry(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT TRIGGER_EVENT_TAB *Tab,
-	IN PUCHAR pBssid,
-	IN HT_CAPABILITY_IE *pHtCapability,
-	IN UCHAR			HtCapabilityLen,
-	IN UCHAR			RegClass,
-	IN UCHAR ChannelNo)
-{
-	// Event A
-	if (HtCapabilityLen == 0)
-	{
-		if (Tab->EventANo < MAX_TRIGGER_EVENT)
-		{
-			RTMPMoveMemory(Tab->EventA[Tab->EventANo].BSSID, pBssid, 6);
-			Tab->EventA[Tab->EventANo].bValid = TRUE;
-			Tab->EventA[Tab->EventANo].Channel = ChannelNo;
-			Tab->EventA[Tab->EventANo].CDCounter = pAd->CommonCfg.Dot11BssWidthChanTranDelay;
-			if (RegClass != 0)
-			{
-				// Beacon has Regulatory class IE. So use beacon's
-				Tab->EventA[Tab->EventANo].RegClass = RegClass;
-			}
-			else
-			{
-				// Use Station's Regulatory class instead.
-				if (pAd->StaActive.SupportedHtPhy.bHtEnable == TRUE)
-				{
-					if (pAd->CommonCfg.CentralChannel > pAd->CommonCfg.Channel)
-					{
-						Tab->EventA[Tab->EventANo].RegClass = 32;
-					}
-					else if (pAd->CommonCfg.CentralChannel < pAd->CommonCfg.Channel)
-						Tab->EventA[Tab->EventANo].RegClass = 33;
-				}
-				else
-					Tab->EventA[Tab->EventANo].RegClass = ??;
-
-			}
-
-			Tab->EventANo ++;
-		}
-	}
-	else if (pHtCapability->HtCapInfo.Intolerant40)
-	{
-		Tab->EventBCountDown = pAd->CommonCfg.Dot11BssWidthChanTranDelay;
-	}
-
-}
-
-/*
-	========================================================================
-	Routine Description:
-		Trigger Event table Maintainence called once every second.
-
-	Arguments:
-	// IRQL = DISPATCH_LEVEL
-	========================================================================
-*/
-VOID TriEventCounterMaintenance(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	UCHAR		i;
-	BOOLEAN			bNotify = FALSE;
-	for (i = 0;i < MAX_TRIGGER_EVENT;i++)
-	{
-		if (pAd->CommonCfg.TriggerEventTab.EventA[i].bValid && (pAd->CommonCfg.TriggerEventTab.EventA[i].CDCounter > 0))
-		{
-			pAd->CommonCfg.TriggerEventTab.EventA[i].CDCounter--;
-			if (pAd->CommonCfg.TriggerEventTab.EventA[i].CDCounter == 0)
-			{
-				pAd->CommonCfg.TriggerEventTab.EventA[i].bValid = FALSE;
-				pAd->CommonCfg.TriggerEventTab.EventANo --;
-				// Need to send 20/40 Coexistence Notify frame if has status change.
-				bNotify = TRUE;
-			}
-		}
-	}
-	if (pAd->CommonCfg.TriggerEventTab.EventBCountDown > 0)
-	{
-		pAd->CommonCfg.TriggerEventTab.EventBCountDown--;
-		if (pAd->CommonCfg.TriggerEventTab.EventBCountDown == 0)
-			bNotify = TRUE;
-	}
-
-	if (bNotify == TRUE)
-		Update2040CoexistFrameAndNotify(pAd, BSSID_WCID, TRUE);
-}
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
-
-// IRQL = DISPATCH_LEVEL
-VOID BssTableSsidSort(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT BSS_TABLE *OutTab,
-	IN	CHAR Ssid[],
-	IN	UCHAR SsidLen)
-{
-	INT i;
-	BssTableInit(OutTab);
-
-	for (i = 0; i < pAd->ScanTab.BssNr; i++)
-	{
-		BSS_ENTRY *pInBss = &pAd->ScanTab.BssEntry[i];
-		BOOLEAN	bIsHiddenApIncluded = FALSE;
-
-		if (((pAd->CommonCfg.bIEEE80211H == 1) &&
-            (pAd->MlmeAux.Channel > 14) &&
-             RadarChannelCheck(pAd, pInBss->Channel))
-#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier
-             || (pAd->CommonCfg.CarrierDetect.Enable == TRUE)
-#endif // CARRIER_DETECTION_SUPPORT //
-            )
-		{
-			if (pInBss->Hidden)
-				bIsHiddenApIncluded = TRUE;
-		}
-
-		if ((pInBss->BssType == pAd->StaCfg.BssType) &&
-			(SSID_EQUAL(Ssid, SsidLen, pInBss->Ssid, pInBss->SsidLen) || bIsHiddenApIncluded))
-		{
-			BSS_ENTRY *pOutBss = &OutTab->BssEntry[OutTab->BssNr];
-
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-			// If no Country IE exists no Connection will be established when IEEE80211dClientMode is strict.
-			if ((pAd->StaCfg.IEEE80211dClientMode == Rt802_11_D_Strict) &&
-				(pInBss->bHasCountryIE == FALSE))
-			{
-				DBGPRINT(RT_DEBUG_TRACE,("StaCfg.IEEE80211dClientMode == Rt802_11_D_Strict, but this AP doesn't have country IE.\n"));
-				continue;
-			}
-#endif // EXT_BUILD_CHANNEL_LIST //
-
-#ifdef DOT11_N_SUPPORT
-			// 2.4G/5G N only mode
-			if ((pInBss->HtCapabilityLen == 0) &&
-				((pAd->CommonCfg.PhyMode == PHY_11N_2_4G) || (pAd->CommonCfg.PhyMode == PHY_11N_5G)))
-			{
-				DBGPRINT(RT_DEBUG_TRACE,("STA is in N-only Mode, this AP don't have Ht capability in Beacon.\n"));
-				continue;
-			}
-#endif // DOT11_N_SUPPORT //
-
-			// New for WPA2
-			// Check the Authmode first
-			if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-			{
-				// Check AuthMode and AuthModeAux for matching, in case AP support dual-mode
-				if ((pAd->StaCfg.AuthMode != pInBss->AuthMode) && (pAd->StaCfg.AuthMode != pInBss->AuthModeAux))
-					// None matched
-					continue;
-
-				// Check cipher suite, AP must have more secured cipher than station setting
-				if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK))
-				{
-					// If it's not mixed mode, we should only let BSS pass with the same encryption
-					if (pInBss->WPA.bMixMode == FALSE)
-						if (pAd->StaCfg.WepStatus != pInBss->WPA.GroupCipher)
-							continue;
-
-					// check group cipher
-					if ((pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) &&
-						(pInBss->WPA.GroupCipher != Ndis802_11GroupWEP40Enabled) &&
-						(pInBss->WPA.GroupCipher != Ndis802_11GroupWEP104Enabled))
-						continue;
-
-					// check pairwise cipher, skip if none matched
-					// If profile set to AES, let it pass without question.
-					// If profile set to TKIP, we must find one mateched
-					if ((pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled) &&
-						(pAd->StaCfg.WepStatus != pInBss->WPA.PairCipher) &&
-						(pAd->StaCfg.WepStatus != pInBss->WPA.PairCipherAux))
-						continue;
-				}
-				else if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK))
-				{
-					// If it's not mixed mode, we should only let BSS pass with the same encryption
-					if (pInBss->WPA2.bMixMode == FALSE)
-						if (pAd->StaCfg.WepStatus != pInBss->WPA2.GroupCipher)
-							continue;
-
-					// check group cipher
-					if ((pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) &&
-						(pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP40Enabled) &&
-						(pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP104Enabled))
-						continue;
-
-					// check pairwise cipher, skip if none matched
-					// If profile set to AES, let it pass without question.
-					// If profile set to TKIP, we must find one mateched
-					if ((pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled) &&
-						(pAd->StaCfg.WepStatus != pInBss->WPA2.PairCipher) &&
-						(pAd->StaCfg.WepStatus != pInBss->WPA2.PairCipherAux))
-						continue;
-				}
-			}
-			// Bss Type matched, SSID matched.
-			// We will check wepstatus for qualification Bss
-			else if (pAd->StaCfg.WepStatus != pInBss->WepStatus)
-			{
-				DBGPRINT(RT_DEBUG_TRACE,("StaCfg.WepStatus=%d, while pInBss->WepStatus=%d\n", pAd->StaCfg.WepStatus, pInBss->WepStatus));
-				//
-				// For the SESv2 case, we will not qualify WepStatus.
-				//
-				if (!pInBss->bSES)
-					continue;
-			}
-
-			// Since the AP is using hidden SSID, and we are trying to connect to ANY
-			// It definitely will fail. So, skip it.
-			// CCX also require not even try to connect it!!
-			if (SsidLen == 0)
-				continue;
-
-#ifdef DOT11_N_SUPPORT
-			// If both station and AP use 40MHz, still need to check if the 40MHZ band's legality in my country region
-			// If this 40MHz wideband is not allowed in my country list, use bandwidth 20MHZ instead,
-			if ((pInBss->CentralChannel != pInBss->Channel) &&
-				(pAd->CommonCfg.RegTransmitSetting.field.BW == BW_40))
-			{
-				if (RTMPCheckChannel(pAd, pInBss->CentralChannel, pInBss->Channel) == FALSE)
-				{
-					pAd->CommonCfg.RegTransmitSetting.field.BW = BW_20;
-					SetCommonHT(pAd);
-					pAd->CommonCfg.RegTransmitSetting.field.BW = BW_40;
-				}
-				else
-				{
-					if (pAd->CommonCfg.DesiredHtPhy.ChannelWidth == BAND_WIDTH_20)
-					{
-						SetCommonHT(pAd);
-					}
-				}
-			}
-#endif // DOT11_N_SUPPORT //
-
-			// copy matching BSS from InTab to OutTab
-			NdisMoveMemory(pOutBss, pInBss, sizeof(BSS_ENTRY));
-
-			OutTab->BssNr++;
-		}
-		else if ((pInBss->BssType == pAd->StaCfg.BssType) && (SsidLen == 0))
-		{
-			BSS_ENTRY *pOutBss = &OutTab->BssEntry[OutTab->BssNr];
-
-
-#ifdef DOT11_N_SUPPORT
-			// 2.4G/5G N only mode
-			if ((pInBss->HtCapabilityLen == 0) &&
-				((pAd->CommonCfg.PhyMode == PHY_11N_2_4G) || (pAd->CommonCfg.PhyMode == PHY_11N_5G)))
-			{
-				DBGPRINT(RT_DEBUG_TRACE,("STA is in N-only Mode, this AP don't have Ht capability in Beacon.\n"));
-				continue;
-			}
-#endif // DOT11_N_SUPPORT //
-
-			// New for WPA2
-			// Check the Authmode first
-			if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-			{
-				// Check AuthMode and AuthModeAux for matching, in case AP support dual-mode
-				if ((pAd->StaCfg.AuthMode != pInBss->AuthMode) && (pAd->StaCfg.AuthMode != pInBss->AuthModeAux))
-					// None matched
-					continue;
-
-				// Check cipher suite, AP must have more secured cipher than station setting
-				if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK))
-				{
-					// If it's not mixed mode, we should only let BSS pass with the same encryption
-					if (pInBss->WPA.bMixMode == FALSE)
-						if (pAd->StaCfg.WepStatus != pInBss->WPA.GroupCipher)
-							continue;
-
-					// check group cipher
-					if (pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher)
-						continue;
-
-					// check pairwise cipher, skip if none matched
-					// If profile set to AES, let it pass without question.
-					// If profile set to TKIP, we must find one mateched
-					if ((pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled) &&
-						(pAd->StaCfg.WepStatus != pInBss->WPA.PairCipher) &&
-						(pAd->StaCfg.WepStatus != pInBss->WPA.PairCipherAux))
-						continue;
-				}
-				else if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK))
-				{
-					// If it's not mixed mode, we should only let BSS pass with the same encryption
-					if (pInBss->WPA2.bMixMode == FALSE)
-						if (pAd->StaCfg.WepStatus != pInBss->WPA2.GroupCipher)
-							continue;
-
-					// check group cipher
-					if (pAd->StaCfg.WepStatus < pInBss->WPA2.GroupCipher)
-						continue;
-
-					// check pairwise cipher, skip if none matched
-					// If profile set to AES, let it pass without question.
-					// If profile set to TKIP, we must find one mateched
-					if ((pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled) &&
-						(pAd->StaCfg.WepStatus != pInBss->WPA2.PairCipher) &&
-						(pAd->StaCfg.WepStatus != pInBss->WPA2.PairCipherAux))
-						continue;
-				}
-			}
-			// Bss Type matched, SSID matched.
-			// We will check wepstatus for qualification Bss
-			else if (pAd->StaCfg.WepStatus != pInBss->WepStatus)
-					continue;
-
-#ifdef DOT11_N_SUPPORT
-			// If both station and AP use 40MHz, still need to check if the 40MHZ band's legality in my country region
-			// If this 40MHz wideband is not allowed in my country list, use bandwidth 20MHZ instead,
-			if ((pInBss->CentralChannel != pInBss->Channel) &&
-				(pAd->CommonCfg.RegTransmitSetting.field.BW == BW_40))
-			{
-				if (RTMPCheckChannel(pAd, pInBss->CentralChannel, pInBss->Channel) == FALSE)
-				{
-					pAd->CommonCfg.RegTransmitSetting.field.BW = BW_20;
-					SetCommonHT(pAd);
-					pAd->CommonCfg.RegTransmitSetting.field.BW = BW_40;
-				}
-			}
-#endif // DOT11_N_SUPPORT //
-
-			// copy matching BSS from InTab to OutTab
-			NdisMoveMemory(pOutBss, pInBss, sizeof(BSS_ENTRY));
-
-			OutTab->BssNr++;
-		}
-
-		if (OutTab->BssNr >= MAX_LEN_OF_BSS_TABLE)
-			break;
-	}
-
-	BssTableSortByRssi(OutTab);
-}
-
-
-// IRQL = DISPATCH_LEVEL
-VOID BssTableSortByRssi(
-	IN OUT BSS_TABLE *OutTab)
-{
-	INT 	  i, j;
-	BSS_ENTRY TmpBss;
-
-	for (i = 0; i < OutTab->BssNr - 1; i++)
-	{
-		for (j = i+1; j < OutTab->BssNr; j++)
-		{
-			if (OutTab->BssEntry[j].Rssi > OutTab->BssEntry[i].Rssi)
-			{
-				NdisMoveMemory(&TmpBss, &OutTab->BssEntry[j], sizeof(BSS_ENTRY));
-				NdisMoveMemory(&OutTab->BssEntry[j], &OutTab->BssEntry[i], sizeof(BSS_ENTRY));
-				NdisMoveMemory(&OutTab->BssEntry[i], &TmpBss, sizeof(BSS_ENTRY));
-			}
-		}
-	}
-}
-#endif // CONFIG_STA_SUPPORT //
-
-
-VOID BssCipherParse(
-	IN OUT	PBSS_ENTRY	pBss)
-{
-	PEID_STRUCT 		 pEid;
-	PUCHAR				pTmp;
-	PRSN_IE_HEADER_STRUCT			pRsnHeader;
-	PCIPHER_SUITE_STRUCT			pCipher;
-	PAKM_SUITE_STRUCT				pAKM;
-	USHORT							Count;
-	INT								Length;
-	NDIS_802_11_ENCRYPTION_STATUS	TmpCipher;
-
-	//
-	// WepStatus will be reset later, if AP announce TKIP or AES on the beacon frame.
-	//
-	if (pBss->Privacy)
-	{
-		pBss->WepStatus 	= Ndis802_11WEPEnabled;
-	}
-	else
-	{
-		pBss->WepStatus 	= Ndis802_11WEPDisabled;
-	}
-	// Set default to disable & open authentication before parsing variable IE
-	pBss->AuthMode		= Ndis802_11AuthModeOpen;
-	pBss->AuthModeAux	= Ndis802_11AuthModeOpen;
-
-	// Init WPA setting
-	pBss->WPA.PairCipher	= Ndis802_11WEPDisabled;
-	pBss->WPA.PairCipherAux = Ndis802_11WEPDisabled;
-	pBss->WPA.GroupCipher	= Ndis802_11WEPDisabled;
-	pBss->WPA.RsnCapability = 0;
-	pBss->WPA.bMixMode		= FALSE;
-
-	// Init WPA2 setting
-	pBss->WPA2.PairCipher	 = Ndis802_11WEPDisabled;
-	pBss->WPA2.PairCipherAux = Ndis802_11WEPDisabled;
-	pBss->WPA2.GroupCipher	 = Ndis802_11WEPDisabled;
-	pBss->WPA2.RsnCapability = 0;
-	pBss->WPA2.bMixMode 	 = FALSE;
-
-
-	Length = (INT) pBss->VarIELen;
-
-	while (Length > 0)
-	{
-		// Parse cipher suite base on WPA1 & WPA2, they should be parsed differently
-		pTmp = ((PUCHAR) pBss->VarIEs) + pBss->VarIELen - Length;
-		pEid = (PEID_STRUCT) pTmp;
-		switch (pEid->Eid)
-		{
-			case IE_WPA:
-				//Parse Cisco IE_WPA (LEAP, CCKM, etc.)
-				if ( NdisEqualMemory((pTmp+8), CISCO_OUI, 3))
-				{
-					pTmp   += 11;
-					switch (*pTmp)
-					{
-						case 1:
-						case 5:	// Although WEP is not allowed in WPA related auth mode, we parse it anyway
-							pBss->WepStatus = Ndis802_11Encryption1Enabled;
-							pBss->WPA.PairCipher = Ndis802_11Encryption1Enabled;
-							pBss->WPA.GroupCipher = Ndis802_11Encryption1Enabled;
-							break;
-						case 2:
-							pBss->WepStatus = Ndis802_11Encryption2Enabled;
-							pBss->WPA.PairCipher = Ndis802_11Encryption1Enabled;
-							pBss->WPA.GroupCipher = Ndis802_11Encryption1Enabled;
-							break;
-						case 4:
-							pBss->WepStatus = Ndis802_11Encryption3Enabled;
-							pBss->WPA.PairCipher = Ndis802_11Encryption1Enabled;
-							pBss->WPA.GroupCipher = Ndis802_11Encryption1Enabled;
-							break;
-						default:
-							break;
-					}
-
-					// if Cisco IE_WPA, break
-					break;
-				}
-				else if (NdisEqualMemory(pEid->Octet, SES_OUI, 3) && (pEid->Len == 7))
-				{
-					pBss->bSES = TRUE;
-					break;
-				}
-				else if (NdisEqualMemory(pEid->Octet, WPA_OUI, 4) != 1)
-				{
-					// if unsupported vendor specific IE
-					break;
-				}
-				// Skip OUI, version, and multicast suite
-				// This part should be improved in the future when AP supported multiple cipher suite.
-				// For now, it's OK since almost all APs have fixed cipher suite supported.
-				// pTmp = (PUCHAR) pEid->Octet;
-				pTmp   += 11;
-
-				// Cipher Suite Selectors from Spec P802.11i/D3.2 P26.
-				//	Value	   Meaning
-				//	0			None
-				//	1			WEP-40
-				//	2			Tkip
-				//	3			WRAP
-				//	4			AES
-				//	5			WEP-104
-				// Parse group cipher
-				switch (*pTmp)
-				{
-					case 1:
-						pBss->WPA.GroupCipher = Ndis802_11GroupWEP40Enabled;
-						break;
-					case 5:
-						pBss->WPA.GroupCipher = Ndis802_11GroupWEP104Enabled;
-						break;
-					case 2:
-						pBss->WPA.GroupCipher = Ndis802_11Encryption2Enabled;
-						break;
-					case 4:
-						pBss->WPA.GroupCipher = Ndis802_11Encryption3Enabled;
-						break;
-					default:
-						break;
-				}
-				// number of unicast suite
-				pTmp   += 1;
-
-				// skip all unicast cipher suites
-				//Count = *(PUSHORT) pTmp;
-				Count = (pTmp[1]<<8) + pTmp[0];
-				pTmp   += sizeof(USHORT);
-
-				// Parsing all unicast cipher suite
-				while (Count > 0)
-				{
-					// Skip OUI
-					pTmp += 3;
-					TmpCipher = Ndis802_11WEPDisabled;
-					switch (*pTmp)
-					{
-						case 1:
-						case 5: // Although WEP is not allowed in WPA related auth mode, we parse it anyway
-							TmpCipher = Ndis802_11Encryption1Enabled;
-							break;
-						case 2:
-							TmpCipher = Ndis802_11Encryption2Enabled;
-							break;
-						case 4:
-							TmpCipher = Ndis802_11Encryption3Enabled;
-							break;
-						default:
-							break;
-					}
-					if (TmpCipher > pBss->WPA.PairCipher)
-					{
-						// Move the lower cipher suite to PairCipherAux
-						pBss->WPA.PairCipherAux = pBss->WPA.PairCipher;
-						pBss->WPA.PairCipher	= TmpCipher;
-					}
-					else
-					{
-						pBss->WPA.PairCipherAux = TmpCipher;
-					}
-					pTmp++;
-					Count--;
-				}
-
-				// 4. get AKM suite counts
-				//Count	= *(PUSHORT) pTmp;
-				Count = (pTmp[1]<<8) + pTmp[0];
-				pTmp   += sizeof(USHORT);
-				pTmp   += 3;
-
-				switch (*pTmp)
-				{
-					case 1:
-						// Set AP support WPA mode
-						if (pBss->AuthMode == Ndis802_11AuthModeOpen)
-							pBss->AuthMode = Ndis802_11AuthModeWPA;
-						else
-							pBss->AuthModeAux = Ndis802_11AuthModeWPA;
-						break;
-					case 2:
-						// Set AP support WPA mode
-						if (pBss->AuthMode == Ndis802_11AuthModeOpen)
-							pBss->AuthMode = Ndis802_11AuthModeWPAPSK;
-						else
-							pBss->AuthModeAux = Ndis802_11AuthModeWPAPSK;
-						break;
-					default:
-						break;
-				}
-				pTmp   += 1;
-
-				// Fixed for WPA-None
-				if (pBss->BssType == BSS_ADHOC)
-				{
-					pBss->AuthMode	  = Ndis802_11AuthModeWPANone;
-					pBss->AuthModeAux = Ndis802_11AuthModeWPANone;
-					pBss->WepStatus   = pBss->WPA.GroupCipher;
-					// Patched bugs for old driver
-					if (pBss->WPA.PairCipherAux == Ndis802_11WEPDisabled)
-						pBss->WPA.PairCipherAux = pBss->WPA.GroupCipher;
-				}
-				else
-					pBss->WepStatus   = pBss->WPA.PairCipher;
-
-				// Check the Pair & Group, if different, turn on mixed mode flag
-				if (pBss->WPA.GroupCipher != pBss->WPA.PairCipher)
-					pBss->WPA.bMixMode = TRUE;
-
-				break;
-
-			case IE_RSN:
-				pRsnHeader = (PRSN_IE_HEADER_STRUCT) pTmp;
-
-				// 0. Version must be 1
-				if (le2cpu16(pRsnHeader->Version) != 1)
-					break;
-				pTmp   += sizeof(RSN_IE_HEADER_STRUCT);
-
-				// 1. Check group cipher
-				pCipher = (PCIPHER_SUITE_STRUCT) pTmp;
-				if (!RTMPEqualMemory(pTmp, RSN_OUI, 3))
-					break;
-
-				// Parse group cipher
-				switch (pCipher->Type)
-				{
-					case 1:
-						pBss->WPA2.GroupCipher = Ndis802_11GroupWEP40Enabled;
-						break;
-					case 5:
-						pBss->WPA2.GroupCipher = Ndis802_11GroupWEP104Enabled;
-						break;
-					case 2:
-						pBss->WPA2.GroupCipher = Ndis802_11Encryption2Enabled;
-						break;
-					case 4:
-						pBss->WPA2.GroupCipher = Ndis802_11Encryption3Enabled;
-						break;
-					default:
-						break;
-				}
-				// set to correct offset for next parsing
-				pTmp   += sizeof(CIPHER_SUITE_STRUCT);
-
-				// 2. Get pairwise cipher counts
-				//Count = *(PUSHORT) pTmp;
-				Count = (pTmp[1]<<8) + pTmp[0];
-				pTmp   += sizeof(USHORT);
-
-				// 3. Get pairwise cipher
-				// Parsing all unicast cipher suite
-				while (Count > 0)
-				{
-					// Skip OUI
-					pCipher = (PCIPHER_SUITE_STRUCT) pTmp;
-					TmpCipher = Ndis802_11WEPDisabled;
-					switch (pCipher->Type)
-					{
-						case 1:
-						case 5: // Although WEP is not allowed in WPA related auth mode, we parse it anyway
-							TmpCipher = Ndis802_11Encryption1Enabled;
-							break;
-						case 2:
-							TmpCipher = Ndis802_11Encryption2Enabled;
-							break;
-						case 4:
-							TmpCipher = Ndis802_11Encryption3Enabled;
-							break;
-						default:
-							break;
-					}
-					if (TmpCipher > pBss->WPA2.PairCipher)
-					{
-						// Move the lower cipher suite to PairCipherAux
-						pBss->WPA2.PairCipherAux = pBss->WPA2.PairCipher;
-						pBss->WPA2.PairCipher	 = TmpCipher;
-					}
-					else
-					{
-						pBss->WPA2.PairCipherAux = TmpCipher;
-					}
-					pTmp += sizeof(CIPHER_SUITE_STRUCT);
-					Count--;
-				}
-
-				// 4. get AKM suite counts
-				//Count	= *(PUSHORT) pTmp;
-				Count = (pTmp[1]<<8) + pTmp[0];
-				pTmp   += sizeof(USHORT);
-
-				// 5. Get AKM ciphers
-				pAKM = (PAKM_SUITE_STRUCT) pTmp;
-				if (!RTMPEqualMemory(pTmp, RSN_OUI, 3))
-					break;
-
-				switch (pAKM->Type)
-				{
-					case 1:
-						// Set AP support WPA mode
-						if (pBss->AuthMode == Ndis802_11AuthModeOpen)
-							pBss->AuthMode = Ndis802_11AuthModeWPA2;
-						else
-							pBss->AuthModeAux = Ndis802_11AuthModeWPA2;
-						break;
-					case 2:
-						// Set AP support WPA mode
-						if (pBss->AuthMode == Ndis802_11AuthModeOpen)
-							pBss->AuthMode = Ndis802_11AuthModeWPA2PSK;
-						else
-							pBss->AuthModeAux = Ndis802_11AuthModeWPA2PSK;
-						break;
-					default:
-						break;
-				}
-				pTmp   += (Count * sizeof(AKM_SUITE_STRUCT));
-
-				// Fixed for WPA-None
-				if (pBss->BssType == BSS_ADHOC)
-				{
-					pBss->AuthMode = Ndis802_11AuthModeWPANone;
-					pBss->AuthModeAux = Ndis802_11AuthModeWPANone;
-					pBss->WPA.PairCipherAux = pBss->WPA2.PairCipherAux;
-					pBss->WPA.GroupCipher	= pBss->WPA2.GroupCipher;
-					pBss->WepStatus 		= pBss->WPA.GroupCipher;
-					// Patched bugs for old driver
-					if (pBss->WPA.PairCipherAux == Ndis802_11WEPDisabled)
-						pBss->WPA.PairCipherAux = pBss->WPA.GroupCipher;
-				}
-				pBss->WepStatus   = pBss->WPA2.PairCipher;
-
-				// 6. Get RSN capability
-				//pBss->WPA2.RsnCapability = *(PUSHORT) pTmp;
-				pBss->WPA2.RsnCapability = (pTmp[1]<<8) + pTmp[0];
-				pTmp += sizeof(USHORT);
-
-				// Check the Pair & Group, if different, turn on mixed mode flag
-				if (pBss->WPA2.GroupCipher != pBss->WPA2.PairCipher)
-					pBss->WPA2.bMixMode = TRUE;
-
-				break;
-			default:
-				break;
-		}
-		Length -= (pEid->Len + 2);
-	}
-}
-
-// ===========================================================================================
-// mac_table.c
-// ===========================================================================================
-
-/*! \brief generates a random mac address value for IBSS BSSID
- *	\param Addr the bssid location
- *	\return none
- *	\pre
- *	\post
- */
-VOID MacAddrRandomBssid(
-	IN PRTMP_ADAPTER pAd,
-	OUT PUCHAR pAddr)
-{
-	INT i;
-
-	for (i = 0; i < MAC_ADDR_LEN; i++)
-	{
-		pAddr[i] = RandomByte(pAd);
-	}
-
-	pAddr[0] = (pAddr[0] & 0xfe) | 0x02;  // the first 2 bits must be 01xxxxxxxx
-}
-
-/*! \brief init the management mac frame header
- *	\param p_hdr mac header
- *	\param subtype subtype of the frame
- *	\param p_ds destination address, don't care if it is a broadcast address
- *	\return none
- *	\pre the station has the following information in the pAd->StaCfg
- *	 - bssid
- *	 - station address
- *	\post
- *	\note this function initializes the following field
-
- IRQL = PASSIVE_LEVEL
- IRQL = DISPATCH_LEVEL
-
- */
-VOID MgtMacHeaderInit(
-	IN	PRTMP_ADAPTER	pAd,
-	IN OUT PHEADER_802_11 pHdr80211,
-	IN UCHAR SubType,
-	IN UCHAR ToDs,
-	IN PUCHAR pDA,
-	IN PUCHAR pBssid)
-{
-	NdisZeroMemory(pHdr80211, sizeof(HEADER_802_11));
-
-	pHdr80211->FC.Type = BTYPE_MGMT;
-	pHdr80211->FC.SubType = SubType;
-//	if (SubType == SUBTYPE_ACK)	// sample, no use, it will conflict with ACTION frame sub type
-//		pHdr80211->FC.Type = BTYPE_CNTL;
-	pHdr80211->FC.ToDs = ToDs;
-	COPY_MAC_ADDR(pHdr80211->Addr1, pDA);
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		COPY_MAC_ADDR(pHdr80211->Addr2, pAd->CurrentAddress);
-#endif // CONFIG_STA_SUPPORT //
-	COPY_MAC_ADDR(pHdr80211->Addr3, pBssid);
-}
-
-// ===========================================================================================
-// mem_mgmt.c
-// ===========================================================================================
-
-/*!***************************************************************************
- * This routine build an outgoing frame, and fill all information specified
- * in argument list to the frame body. The actual frame size is the summation
- * of all arguments.
- * input params:
- *		Buffer - pointer to a pre-allocated memory segment
- *		args - a list of <int arg_size, arg> pairs.
- *		NOTE NOTE NOTE!!!! the last argument must be NULL, otherwise this
- *						   function will FAIL!!!
- * return:
- *		Size of the buffer
- * usage:
- *		MakeOutgoingFrame(Buffer, output_length, 2, &fc, 2, &dur, 6, p_addr1, 6,p_addr2, END_OF_ARGS);
-
- IRQL = PASSIVE_LEVEL
- IRQL = DISPATCH_LEVEL
-
- ****************************************************************************/
-ULONG MakeOutgoingFrame(
-	OUT CHAR *Buffer,
-	OUT ULONG *FrameLen, ...)
-{
-	CHAR   *p;
-	int 	leng;
-	ULONG	TotLeng;
-	va_list Args;
-
-	// calculates the total length
-	TotLeng = 0;
-	va_start(Args, FrameLen);
-	do
-	{
-		leng = va_arg(Args, int);
-		if (leng == END_OF_ARGS)
-		{
-			break;
-		}
-		p = va_arg(Args, PVOID);
-		NdisMoveMemory(&Buffer[TotLeng], p, leng);
-		TotLeng = TotLeng + leng;
-	} while(TRUE);
-
-	va_end(Args); /* clean up */
-	*FrameLen = TotLeng;
-	return TotLeng;
-}
-
-// ===========================================================================================
-// mlme_queue.c
-// ===========================================================================================
-
-/*! \brief	Initialize The MLME Queue, used by MLME Functions
- *	\param	*Queue	   The MLME Queue
- *	\return Always	   Return NDIS_STATE_SUCCESS in this implementation
- *	\pre
- *	\post
- *	\note	Because this is done only once (at the init stage), no need to be locked
-
- IRQL = PASSIVE_LEVEL
-
- */
-NDIS_STATUS MlmeQueueInit(
-	IN MLME_QUEUE *Queue)
-{
-	INT i;
-
-	NdisAllocateSpinLock(&Queue->Lock);
-
-	Queue->Num	= 0;
-	Queue->Head = 0;
-	Queue->Tail = 0;
-
-	for (i = 0; i < MAX_LEN_OF_MLME_QUEUE; i++)
-	{
-		Queue->Entry[i].Occupied = FALSE;
-		Queue->Entry[i].MsgLen = 0;
-		NdisZeroMemory(Queue->Entry[i].Msg, MGMT_DMA_BUFFER_SIZE);
-	}
-
-	return NDIS_STATUS_SUCCESS;
-}
-
-/*! \brief	 Enqueue a message for other threads, if they want to send messages to MLME thread
- *	\param	*Queue	  The MLME Queue
- *	\param	 Machine  The State Machine Id
- *	\param	 MsgType  The Message Type
- *	\param	 MsgLen   The Message length
- *	\param	*Msg	  The message pointer
- *	\return  TRUE if enqueue is successful, FALSE if the queue is full
- *	\pre
- *	\post
- *	\note	 The message has to be initialized
-
- IRQL = PASSIVE_LEVEL
- IRQL = DISPATCH_LEVEL
-
- */
-BOOLEAN MlmeEnqueue(
-	IN	PRTMP_ADAPTER	pAd,
-	IN ULONG Machine,
-	IN ULONG MsgType,
-	IN ULONG MsgLen,
-	IN VOID *Msg)
-{
-	INT Tail;
-	MLME_QUEUE	*Queue = (MLME_QUEUE *)&pAd->Mlme.Queue;
-
-	// Do nothing if the driver is starting halt state.
-	// This might happen when timer already been fired before cancel timer with mlmehalt
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
-		return FALSE;
-
-	// First check the size, it MUST not exceed the mlme queue size
-	if (MsgLen > MGMT_DMA_BUFFER_SIZE)
-	{
-		DBGPRINT_ERR(("MlmeEnqueue: msg too large, size = %ld \n", MsgLen));
-		return FALSE;
-	}
-
-	if (MlmeQueueFull(Queue))
-	{
-		return FALSE;
-	}
-
-	NdisAcquireSpinLock(&(Queue->Lock));
-	Tail = Queue->Tail;
-	Queue->Tail++;
-	Queue->Num++;
-	if (Queue->Tail == MAX_LEN_OF_MLME_QUEUE)
-	{
-		Queue->Tail = 0;
-	}
-
-	Queue->Entry[Tail].Wcid = RESERVED_WCID;
-	Queue->Entry[Tail].Occupied = TRUE;
-	Queue->Entry[Tail].Machine = Machine;
-	Queue->Entry[Tail].MsgType = MsgType;
-	Queue->Entry[Tail].MsgLen  = MsgLen;
-
-	if (Msg != NULL)
-	{
-		NdisMoveMemory(Queue->Entry[Tail].Msg, Msg, MsgLen);
-	}
-
-	NdisReleaseSpinLock(&(Queue->Lock));
-	return TRUE;
-}
-
-/*! \brief	 This function is used when Recv gets a MLME message
- *	\param	*Queue			 The MLME Queue
- *	\param	 TimeStampHigh	 The upper 32 bit of timestamp
- *	\param	 TimeStampLow	 The lower 32 bit of timestamp
- *	\param	 Rssi			 The receiving RSSI strength
- *	\param	 MsgLen 		 The length of the message
- *	\param	*Msg			 The message pointer
- *	\return  TRUE if everything ok, FALSE otherwise (like Queue Full)
- *	\pre
- *	\post
-
- IRQL = DISPATCH_LEVEL
-
- */
-BOOLEAN MlmeEnqueueForRecv(
-	IN	PRTMP_ADAPTER	pAd,
-	IN ULONG Wcid,
-	IN ULONG TimeStampHigh,
-	IN ULONG TimeStampLow,
-	IN UCHAR Rssi0,
-	IN UCHAR Rssi1,
-	IN UCHAR Rssi2,
-	IN ULONG MsgLen,
-	IN VOID *Msg,
-	IN UCHAR Signal)
-{
-	INT 		 Tail, Machine;
-	PFRAME_802_11 pFrame = (PFRAME_802_11)Msg;
-	INT		 MsgType;
-	MLME_QUEUE	*Queue = (MLME_QUEUE *)&pAd->Mlme.Queue;
-
-#ifdef RALINK_ATE
-	/* Nothing to do in ATE mode */
-	if(ATE_ON(pAd))
-		return FALSE;
-#endif // RALINK_ATE //
-
-	// Do nothing if the driver is starting halt state.
-	// This might happen when timer already been fired before cancel timer with mlmehalt
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
-	{
-		DBGPRINT_ERR(("MlmeEnqueueForRecv: fRTMP_ADAPTER_HALT_IN_PROGRESS\n"));
-		return FALSE;
-	}
-
-	// First check the size, it MUST not exceed the mlme queue size
-	if (MsgLen > MGMT_DMA_BUFFER_SIZE)
-	{
-		DBGPRINT_ERR(("MlmeEnqueueForRecv: frame too large, size = %ld \n", MsgLen));
-		return FALSE;
-	}
-
-	if (MlmeQueueFull(Queue))
-	{
-		return FALSE;
-	}
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if (!MsgTypeSubst(pAd, pFrame, &Machine, &MsgType))
-		{
-			DBGPRINT_ERR(("MlmeEnqueueForRecv: un-recongnized mgmt->subtype=%d\n",pFrame->Hdr.FC.SubType));
-			return FALSE;
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	// OK, we got all the informations, it is time to put things into queue
-	NdisAcquireSpinLock(&(Queue->Lock));
-	Tail = Queue->Tail;
-	Queue->Tail++;
-	Queue->Num++;
-	if (Queue->Tail == MAX_LEN_OF_MLME_QUEUE)
-	{
-		Queue->Tail = 0;
-	}
-	Queue->Entry[Tail].Occupied = TRUE;
-	Queue->Entry[Tail].Machine = Machine;
-	Queue->Entry[Tail].MsgType = MsgType;
-	Queue->Entry[Tail].MsgLen  = MsgLen;
-	Queue->Entry[Tail].TimeStamp.u.LowPart = TimeStampLow;
-	Queue->Entry[Tail].TimeStamp.u.HighPart = TimeStampHigh;
-	Queue->Entry[Tail].Rssi0 = Rssi0;
-	Queue->Entry[Tail].Rssi1 = Rssi1;
-	Queue->Entry[Tail].Rssi2 = Rssi2;
-	Queue->Entry[Tail].Signal = Signal;
-	Queue->Entry[Tail].Wcid = (UCHAR)Wcid;
-
-	Queue->Entry[Tail].Channel = pAd->LatchRfRegs.Channel;
-
-	if (Msg != NULL)
-	{
-		NdisMoveMemory(Queue->Entry[Tail].Msg, Msg, MsgLen);
-	}
-
-	NdisReleaseSpinLock(&(Queue->Lock));
-
-	RT28XX_MLME_HANDLER(pAd);
-
-	return TRUE;
-}
-
-
-/*! \brief	 Dequeue a message from the MLME Queue
- *	\param	*Queue	  The MLME Queue
- *	\param	*Elem	  The message dequeued from MLME Queue
- *	\return  TRUE if the Elem contains something, FALSE otherwise
- *	\pre
- *	\post
-
- IRQL = DISPATCH_LEVEL
-
- */
-BOOLEAN MlmeDequeue(
-	IN MLME_QUEUE *Queue,
-	OUT MLME_QUEUE_ELEM **Elem)
-{
-	NdisAcquireSpinLock(&(Queue->Lock));
-	*Elem = &(Queue->Entry[Queue->Head]);
-	Queue->Num--;
-	Queue->Head++;
-	if (Queue->Head == MAX_LEN_OF_MLME_QUEUE)
-	{
-		Queue->Head = 0;
-	}
-	NdisReleaseSpinLock(&(Queue->Lock));
-	return TRUE;
-}
-
-// IRQL = DISPATCH_LEVEL
-VOID	MlmeRestartStateMachine(
-	IN	PRTMP_ADAPTER	pAd)
-{
-#ifdef CONFIG_STA_SUPPORT
-	BOOLEAN				Cancelled;
-#endif // CONFIG_STA_SUPPORT //
-
-	DBGPRINT(RT_DEBUG_TRACE, ("MlmeRestartStateMachine \n"));
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-#ifdef QOS_DLS_SUPPORT
-		UCHAR i;
-#endif // QOS_DLS_SUPPORT //
-		// Cancel all timer events
-		// Be careful to cancel new added timer
-		RTMPCancelTimer(&pAd->MlmeAux.AssocTimer,	  &Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.ReassocTimer,   &Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.DisassocTimer,  &Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.AuthTimer,	   &Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer,	   &Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.ScanTimer,	   &Cancelled);
-
-#ifdef QOS_DLS_SUPPORT
-		for (i=0; i<MAX_NUM_OF_DLS_ENTRY; i++)
-		{
-			RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &Cancelled);
-		}
-#endif // QOS_DLS_SUPPORT //
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	// Change back to original channel in case of doing scan
-	AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
-	AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-
-	// Resume MSDU which is turned off durning scan
-	RTMPResumeMsduTransmission(pAd);
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// Set all state machines back IDLE
-		pAd->Mlme.CntlMachine.CurrState    = CNTL_IDLE;
-		pAd->Mlme.AssocMachine.CurrState   = ASSOC_IDLE;
-		pAd->Mlme.AuthMachine.CurrState    = AUTH_REQ_IDLE;
-		pAd->Mlme.AuthRspMachine.CurrState = AUTH_RSP_IDLE;
-		pAd->Mlme.SyncMachine.CurrState    = SYNC_IDLE;
-		pAd->Mlme.ActMachine.CurrState    = ACT_IDLE;
-#ifdef QOS_DLS_SUPPORT
-		pAd->Mlme.DlsMachine.CurrState    = DLS_IDLE;
-#endif // QOS_DLS_SUPPORT //
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-}
-
-/*! \brief	test if the MLME Queue is empty
- *	\param	*Queue	  The MLME Queue
- *	\return TRUE if the Queue is empty, FALSE otherwise
- *	\pre
- *	\post
-
- IRQL = DISPATCH_LEVEL
-
- */
-BOOLEAN MlmeQueueEmpty(
-	IN MLME_QUEUE *Queue)
-{
-	BOOLEAN Ans;
-
-	NdisAcquireSpinLock(&(Queue->Lock));
-	Ans = (Queue->Num == 0);
-	NdisReleaseSpinLock(&(Queue->Lock));
-
-	return Ans;
-}
-
-/*! \brief	 test if the MLME Queue is full
- *	\param	 *Queue 	 The MLME Queue
- *	\return  TRUE if the Queue is empty, FALSE otherwise
- *	\pre
- *	\post
-
- IRQL = PASSIVE_LEVEL
- IRQL = DISPATCH_LEVEL
-
- */
-BOOLEAN MlmeQueueFull(
-	IN MLME_QUEUE *Queue)
-{
-	BOOLEAN Ans;
-
-	NdisAcquireSpinLock(&(Queue->Lock));
-	Ans = (Queue->Num == MAX_LEN_OF_MLME_QUEUE || Queue->Entry[Queue->Tail].Occupied);
-	NdisReleaseSpinLock(&(Queue->Lock));
-
-	return Ans;
-}
-
-/*! \brief	 The destructor of MLME Queue
- *	\param
- *	\return
- *	\pre
- *	\post
- *	\note	Clear Mlme Queue, Set Queue->Num to Zero.
-
- IRQL = PASSIVE_LEVEL
-
- */
-VOID MlmeQueueDestroy(
-	IN MLME_QUEUE *pQueue)
-{
-	NdisAcquireSpinLock(&(pQueue->Lock));
-	pQueue->Num  = 0;
-	pQueue->Head = 0;
-	pQueue->Tail = 0;
-	NdisReleaseSpinLock(&(pQueue->Lock));
-	NdisFreeSpinLock(&(pQueue->Lock));
-}
-
-/*! \brief	 To substitute the message type if the message is coming from external
- *	\param	pFrame		   The frame received
- *	\param	*Machine	   The state machine
- *	\param	*MsgType	   the message type for the state machine
- *	\return TRUE if the substitution is successful, FALSE otherwise
- *	\pre
- *	\post
-
- IRQL = DISPATCH_LEVEL
-
- */
-#ifdef CONFIG_STA_SUPPORT
-BOOLEAN MsgTypeSubst(
-	IN PRTMP_ADAPTER  pAd,
-	IN PFRAME_802_11 pFrame,
-	OUT INT *Machine,
-	OUT INT *MsgType)
-{
-	USHORT	Seq;
-	UCHAR	EAPType;
-	PUCHAR	pData;
-
-	// Pointer to start of data frames including SNAP header
-	pData = (PUCHAR) pFrame + LENGTH_802_11;
-
-	// The only data type will pass to this function is EAPOL frame
-	if (pFrame->Hdr.FC.Type == BTYPE_DATA)
-	{
-		if (NdisEqualMemory(SNAP_AIRONET, pData, LENGTH_802_1_H))
-		{
-			// Cisco Aironet SNAP header
-			*Machine = AIRONET_STATE_MACHINE;
-			*MsgType = MT2_AIRONET_MSG;
-			return (TRUE);
-		}
-#ifdef LEAP_SUPPORT
-		if ( pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP ) //LEAP
-		{
-			// LEAP frames
-			*Machine = LEAP_STATE_MACHINE;
-			EAPType = *((UCHAR*)pFrame + LENGTH_802_11 + LENGTH_802_1_H + 1);
-			return (LeapMsgTypeSubst(EAPType, MsgType));
-		}
-		else
-#endif // LEAP_SUPPORT //
-		{
-			*Machine = WPA_PSK_STATE_MACHINE;
-			EAPType = *((UCHAR*)pFrame + LENGTH_802_11 + LENGTH_802_1_H + 1);
-			return(WpaMsgTypeSubst(EAPType, MsgType));
-		}
-	}
-
-	switch (pFrame->Hdr.FC.SubType)
-	{
-		case SUBTYPE_ASSOC_REQ:
-			*Machine = ASSOC_STATE_MACHINE;
-			*MsgType = MT2_PEER_ASSOC_REQ;
-			break;
-		case SUBTYPE_ASSOC_RSP:
-			*Machine = ASSOC_STATE_MACHINE;
-			*MsgType = MT2_PEER_ASSOC_RSP;
-			break;
-		case SUBTYPE_REASSOC_REQ:
-			*Machine = ASSOC_STATE_MACHINE;
-			*MsgType = MT2_PEER_REASSOC_REQ;
-			break;
-		case SUBTYPE_REASSOC_RSP:
-			*Machine = ASSOC_STATE_MACHINE;
-			*MsgType = MT2_PEER_REASSOC_RSP;
-			break;
-		case SUBTYPE_PROBE_REQ:
-			*Machine = SYNC_STATE_MACHINE;
-			*MsgType = MT2_PEER_PROBE_REQ;
-			break;
-		case SUBTYPE_PROBE_RSP:
-			*Machine = SYNC_STATE_MACHINE;
-			*MsgType = MT2_PEER_PROBE_RSP;
-			break;
-		case SUBTYPE_BEACON:
-			*Machine = SYNC_STATE_MACHINE;
-			*MsgType = MT2_PEER_BEACON;
-			break;
-		case SUBTYPE_ATIM:
-			*Machine = SYNC_STATE_MACHINE;
-			*MsgType = MT2_PEER_ATIM;
-			break;
-		case SUBTYPE_DISASSOC:
-			*Machine = ASSOC_STATE_MACHINE;
-			*MsgType = MT2_PEER_DISASSOC_REQ;
-			break;
-		case SUBTYPE_AUTH:
-			// get the sequence number from payload 24 Mac Header + 2 bytes algorithm
-			NdisMoveMemory(&Seq, &pFrame->Octet[2], sizeof(USHORT));
-			if (Seq == 1 || Seq == 3)
-			{
-				*Machine = AUTH_RSP_STATE_MACHINE;
-				*MsgType = MT2_PEER_AUTH_ODD;
-			}
-			else if (Seq == 2 || Seq == 4)
-			{
-				*Machine = AUTH_STATE_MACHINE;
-				*MsgType = MT2_PEER_AUTH_EVEN;
-			}
-			else
-			{
-				return FALSE;
-			}
-			break;
-		case SUBTYPE_DEAUTH:
-			*Machine = AUTH_RSP_STATE_MACHINE;
-			*MsgType = MT2_PEER_DEAUTH;
-			break;
-		case SUBTYPE_ACTION:
-			*Machine = ACTION_STATE_MACHINE;
-			//  Sometimes Sta will return with category bytes with MSB = 1, if they receive catogory out of their support
-			if ((pFrame->Octet[0]&0x7F) > MAX_PEER_CATE_MSG)
-			{
-				*MsgType = MT2_ACT_INVALID;
-			}
-			else
-			{
-				*MsgType = (pFrame->Octet[0]&0x7F);
-			}
-			break;
-		default:
-			return FALSE;
-			break;
-	}
-
-	return TRUE;
-}
-#endif // CONFIG_STA_SUPPORT //
-
-// ===========================================================================================
-// state_machine.c
-// ===========================================================================================
-
-/*! \brief Initialize the state machine.
- *	\param *S			pointer to the state machine
- *	\param	Trans		State machine transition function
- *	\param	StNr		number of states
- *	\param	MsgNr		number of messages
- *	\param	DefFunc 	default function, when there is invalid state/message combination
- *	\param	InitState	initial state of the state machine
- *	\param	Base		StateMachine base, internal use only
- *	\pre p_sm should be a legal pointer
- *	\post
-
- IRQL = PASSIVE_LEVEL
-
- */
-VOID StateMachineInit(
-	IN STATE_MACHINE *S,
-	IN STATE_MACHINE_FUNC Trans[],
-	IN ULONG StNr,
-	IN ULONG MsgNr,
-	IN STATE_MACHINE_FUNC DefFunc,
-	IN ULONG InitState,
-	IN ULONG Base)
-{
-	ULONG i, j;
-
-	// set number of states and messages
-	S->NrState = StNr;
-	S->NrMsg   = MsgNr;
-	S->Base    = Base;
-
-	S->TransFunc  = Trans;
-
-	// init all state transition to default function
-	for (i = 0; i < StNr; i++)
-	{
-		for (j = 0; j < MsgNr; j++)
-		{
-			S->TransFunc[i * MsgNr + j] = DefFunc;
-		}
-	}
-
-	// set the starting state
-	S->CurrState = InitState;
-}
-
-/*! \brief This function fills in the function pointer into the cell in the state machine
- *	\param *S	pointer to the state machine
- *	\param St	state
- *	\param Msg	incoming message
- *	\param f	the function to be executed when (state, message) combination occurs at the state machine
- *	\pre *S should be a legal pointer to the state machine, st, msg, should be all within the range, Base should be set in the initial state
- *	\post
-
- IRQL = PASSIVE_LEVEL
-
- */
-VOID StateMachineSetAction(
-	IN STATE_MACHINE *S,
-	IN ULONG St,
-	IN ULONG Msg,
-	IN STATE_MACHINE_FUNC Func)
-{
-	ULONG MsgIdx;
-
-	MsgIdx = Msg - S->Base;
-
-	if (St < S->NrState && MsgIdx < S->NrMsg)
-	{
-		// boundary checking before setting the action
-		S->TransFunc[St * S->NrMsg + MsgIdx] = Func;
-	}
-}
-
-/*! \brief	 This function does the state transition
- *	\param	 *Adapter the NIC adapter pointer
- *	\param	 *S 	  the state machine
- *	\param	 *Elem	  the message to be executed
- *	\return   None
-
- IRQL = DISPATCH_LEVEL
-
- */
-VOID StateMachinePerformAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN STATE_MACHINE *S,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	(*(S->TransFunc[S->CurrState * S->NrMsg + Elem->MsgType - S->Base]))(pAd, Elem);
-}
-
-/*
-	==========================================================================
-	Description:
-		The drop function, when machine executes this, the message is simply
-		ignored. This function does nothing, the message is freed in
-		StateMachinePerformAction()
-	==========================================================================
- */
-VOID Drop(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-}
-
-// ===========================================================================================
-// lfsr.c
-// ===========================================================================================
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = PASSIVE_LEVEL
-
-	==========================================================================
- */
-VOID LfsrInit(
-	IN PRTMP_ADAPTER pAd,
-	IN ULONG Seed)
-{
-	if (Seed == 0)
-		pAd->Mlme.ShiftReg = 1;
-	else
-		pAd->Mlme.ShiftReg = Seed;
-}
-
-/*
-	==========================================================================
-	Description:
-	==========================================================================
- */
-UCHAR RandomByte(
-	IN PRTMP_ADAPTER pAd)
-{
-	ULONG i;
-	UCHAR R, Result;
-
-	R = 0;
-
-	if (pAd->Mlme.ShiftReg == 0)
-	NdisGetSystemUpTime((ULONG *)&pAd->Mlme.ShiftReg);
-
-	for (i = 0; i < 8; i++)
-	{
-		if (pAd->Mlme.ShiftReg & 0x00000001)
-		{
-			pAd->Mlme.ShiftReg = ((pAd->Mlme.ShiftReg ^ LFSR_MASK) >> 1) | 0x80000000;
-			Result = 1;
-		}
-		else
-		{
-			pAd->Mlme.ShiftReg = pAd->Mlme.ShiftReg >> 1;
-			Result = 0;
-		}
-		R = (R << 1) | Result;
-	}
-
-	return R;
-}
-
-VOID AsicUpdateAutoFallBackTable(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pRateTable)
-{
-	UCHAR					i;
-	HT_FBK_CFG0_STRUC		HtCfg0;
-	HT_FBK_CFG1_STRUC		HtCfg1;
-	LG_FBK_CFG0_STRUC		LgCfg0;
-	LG_FBK_CFG1_STRUC		LgCfg1;
-	PRTMP_TX_RATE_SWITCH	pCurrTxRate, pNextTxRate;
-
-	// set to initial value
-	HtCfg0.word = 0x65432100;
-	HtCfg1.word = 0xedcba988;
-	LgCfg0.word = 0xedcba988;
-	LgCfg1.word = 0x00002100;
-
-	pNextTxRate = (PRTMP_TX_RATE_SWITCH)pRateTable+1;
-	for (i = 1; i < *((PUCHAR) pRateTable); i++)
-	{
-		pCurrTxRate = (PRTMP_TX_RATE_SWITCH)pRateTable+1+i;
-		switch (pCurrTxRate->Mode)
-		{
-			case 0:		//CCK
-				break;
-			case 1:		//OFDM
-				{
-					switch(pCurrTxRate->CurrMCS)
-					{
-						case 0:
-							LgCfg0.field.OFDMMCS0FBK = (pNextTxRate->Mode == MODE_OFDM) ? (pNextTxRate->CurrMCS+8): pNextTxRate->CurrMCS;
-							break;
-						case 1:
-							LgCfg0.field.OFDMMCS1FBK = (pNextTxRate->Mode == MODE_OFDM) ? (pNextTxRate->CurrMCS+8): pNextTxRate->CurrMCS;
-							break;
-						case 2:
-							LgCfg0.field.OFDMMCS2FBK = (pNextTxRate->Mode == MODE_OFDM) ? (pNextTxRate->CurrMCS+8): pNextTxRate->CurrMCS;
-							break;
-						case 3:
-							LgCfg0.field.OFDMMCS3FBK = (pNextTxRate->Mode == MODE_OFDM) ? (pNextTxRate->CurrMCS+8): pNextTxRate->CurrMCS;
-							break;
-						case 4:
-							LgCfg0.field.OFDMMCS4FBK = (pNextTxRate->Mode == MODE_OFDM) ? (pNextTxRate->CurrMCS+8): pNextTxRate->CurrMCS;
-							break;
-						case 5:
-							LgCfg0.field.OFDMMCS5FBK = (pNextTxRate->Mode == MODE_OFDM) ? (pNextTxRate->CurrMCS+8): pNextTxRate->CurrMCS;
-							break;
-						case 6:
-							LgCfg0.field.OFDMMCS6FBK = (pNextTxRate->Mode == MODE_OFDM) ? (pNextTxRate->CurrMCS+8): pNextTxRate->CurrMCS;
-							break;
-						case 7:
-							LgCfg0.field.OFDMMCS7FBK = (pNextTxRate->Mode == MODE_OFDM) ? (pNextTxRate->CurrMCS+8): pNextTxRate->CurrMCS;
-							break;
-					}
-				}
-				break;
-#ifdef DOT11_N_SUPPORT
-			case 2:		//HT-MIX
-			case 3:		//HT-GF
-				{
-					if ((pNextTxRate->Mode >= MODE_HTMIX) && (pCurrTxRate->CurrMCS != pNextTxRate->CurrMCS))
-					{
-						switch(pCurrTxRate->CurrMCS)
-						{
-							case 0:
-								HtCfg0.field.HTMCS0FBK = pNextTxRate->CurrMCS;
-								break;
-							case 1:
-								HtCfg0.field.HTMCS1FBK = pNextTxRate->CurrMCS;
-								break;
-							case 2:
-								HtCfg0.field.HTMCS2FBK = pNextTxRate->CurrMCS;
-								break;
-							case 3:
-								HtCfg0.field.HTMCS3FBK = pNextTxRate->CurrMCS;
-								break;
-							case 4:
-								HtCfg0.field.HTMCS4FBK = pNextTxRate->CurrMCS;
-								break;
-							case 5:
-								HtCfg0.field.HTMCS5FBK = pNextTxRate->CurrMCS;
-								break;
-							case 6:
-								HtCfg0.field.HTMCS6FBK = pNextTxRate->CurrMCS;
-								break;
-							case 7:
-								HtCfg0.field.HTMCS7FBK = pNextTxRate->CurrMCS;
-								break;
-							case 8:
-								HtCfg1.field.HTMCS8FBK = pNextTxRate->CurrMCS;
-								break;
-							case 9:
-								HtCfg1.field.HTMCS9FBK = pNextTxRate->CurrMCS;
-								break;
-							case 10:
-								HtCfg1.field.HTMCS10FBK = pNextTxRate->CurrMCS;
-								break;
-							case 11:
-								HtCfg1.field.HTMCS11FBK = pNextTxRate->CurrMCS;
-								break;
-							case 12:
-								HtCfg1.field.HTMCS12FBK = pNextTxRate->CurrMCS;
-								break;
-							case 13:
-								HtCfg1.field.HTMCS13FBK = pNextTxRate->CurrMCS;
-								break;
-							case 14:
-								HtCfg1.field.HTMCS14FBK = pNextTxRate->CurrMCS;
-								break;
-							case 15:
-								HtCfg1.field.HTMCS15FBK = pNextTxRate->CurrMCS;
-								break;
-							default:
-								DBGPRINT(RT_DEBUG_ERROR, ("AsicUpdateAutoFallBackTable: not support CurrMCS=%d\n", pCurrTxRate->CurrMCS));
-						}
-					}
-				}
-				break;
-#endif // DOT11_N_SUPPORT //
-		}
-
-		pNextTxRate = pCurrTxRate;
-	}
-
-	RTMP_IO_WRITE32(pAd, HT_FBK_CFG0, HtCfg0.word);
-	RTMP_IO_WRITE32(pAd, HT_FBK_CFG1, HtCfg1.word);
-	RTMP_IO_WRITE32(pAd, LG_FBK_CFG0, LgCfg0.word);
-	RTMP_IO_WRITE32(pAd, LG_FBK_CFG1, LgCfg1.word);
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Set MAC register value according operation mode.
-		OperationMode AND bNonGFExist are for MM and GF Proteciton.
-		If MM or GF mask is not set, those passing argument doesn't not take effect.
-
-		Operation mode meaning:
-		= 0 : Pure HT, no preotection.
-		= 0x01; there may be non-HT devices in both the control and extension channel, protection is optional in BSS.
-		= 0x10: No Transmission in 40M is protected.
-		= 0x11: Transmission in both 40M and 20M shall be protected
-		if (bNonGFExist)
-			we should choose not to use GF. But still set correct ASIC registers.
-	========================================================================
-*/
-VOID 	AsicUpdateProtect(
-	IN		PRTMP_ADAPTER	pAd,
-	IN 		USHORT			OperationMode,
-	IN 		UCHAR			SetMask,
-	IN		BOOLEAN			bDisableBGProtect,
-	IN		BOOLEAN			bNonGFExist)
-{
-	PROT_CFG_STRUC	ProtCfg, ProtCfg4;
-	UINT32 Protect[6];
-	USHORT			offset;
-	UCHAR			i;
-	UINT32 MacReg = 0;
-
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-#ifdef DOT11_N_SUPPORT
-	if (!(pAd->CommonCfg.bHTProtect) && (OperationMode != 8))
-	{
-		return;
-	}
-
-	if (pAd->BATable.numAsOriginator)
-	{
-		//
-		// enable the RTS/CTS to avoid channel collision
-		//
-		SetMask = ALLN_SETPROTECT;
-		OperationMode = 8;
-	}
-#endif // DOT11_N_SUPPORT //
-
-	// Config ASIC RTS threshold register
-	RTMP_IO_READ32(pAd, TX_RTS_CFG, &MacReg);
-	MacReg &= 0xFF0000FF;
-#if 0
-	MacReg |= (pAd->CommonCfg.RtsThreshold << 8);
-#else
-	// If the user want disable RtsThreshold and enable Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
-        if ((
-#ifdef DOT11_N_SUPPORT
-			(pAd->CommonCfg.BACapability.field.AmsduEnable) ||
-#endif // DOT11_N_SUPPORT //
-			(pAd->CommonCfg.bAggregationCapable == TRUE))
-            && pAd->CommonCfg.RtsThreshold == MAX_RTS_THRESHOLD)
-        {
-			MacReg |= (0x1000 << 8);
-        }
-        else
-        {
-			MacReg |= (pAd->CommonCfg.RtsThreshold << 8);
-        }
-#endif
-
-	RTMP_IO_WRITE32(pAd, TX_RTS_CFG, MacReg);
-
-	// Initial common protection settings
-	RTMPZeroMemory(Protect, sizeof(Protect));
-	ProtCfg4.word = 0;
-	ProtCfg.word = 0;
-	ProtCfg.field.TxopAllowGF40 = 1;
-	ProtCfg.field.TxopAllowGF20 = 1;
-	ProtCfg.field.TxopAllowMM40 = 1;
-	ProtCfg.field.TxopAllowMM20 = 1;
-	ProtCfg.field.TxopAllowOfdm = 1;
-	ProtCfg.field.TxopAllowCck = 1;
-	ProtCfg.field.RTSThEn = 1;
-	ProtCfg.field.ProtectNav = ASIC_SHORTNAV;
-
-	// update PHY mode and rate
-	if (pAd->CommonCfg.Channel > 14)
-		ProtCfg.field.ProtectRate = 0x4000;
-	ProtCfg.field.ProtectRate |= pAd->CommonCfg.RtsRate;
-
-	// Handle legacy(B/G) protection
-	if (bDisableBGProtect)
-	{
-		//ProtCfg.field.ProtectRate = pAd->CommonCfg.RtsRate;
-		ProtCfg.field.ProtectCtrl = 0;
-		Protect[0] = ProtCfg.word;
-		Protect[1] = ProtCfg.word;
-	}
-	else
-	{
-		//ProtCfg.field.ProtectRate = pAd->CommonCfg.RtsRate;
-		ProtCfg.field.ProtectCtrl = 0;			// CCK do not need to be protected
-		Protect[0] = ProtCfg.word;
-		ProtCfg.field.ProtectCtrl = ASIC_CTS;	// OFDM needs using CCK to protect
-		Protect[1] = ProtCfg.word;
-	}
-
-#ifdef DOT11_N_SUPPORT
-	// Decide HT frame protection.
-	if ((SetMask & ALLN_SETPROTECT) != 0)
-	{
-		switch(OperationMode)
-		{
-			case 0x0:
-				// NO PROTECT
-				// 1.All STAs in the BSS are 20/40 MHz HT
-				// 2. in ai 20/40MHz BSS
-				// 3. all STAs are 20MHz in a 20MHz BSS
-				// Pure HT. no protection.
-
-				// MM20_PROT_CFG
-				//	Reserved (31:27)
-				// 	PROT_TXOP(25:20) -- 010111
-				//	PROT_NAV(19:18)  -- 01 (Short NAV protection)
-				//  PROT_CTRL(17:16) -- 00 (None)
-				// 	PROT_RATE(15:0)  -- 0x4004 (OFDM 24M)
-				Protect[2] = 0x01744004;
-
-				// MM40_PROT_CFG
-				//	Reserved (31:27)
-				// 	PROT_TXOP(25:20) -- 111111
-				//	PROT_NAV(19:18)  -- 01 (Short NAV protection)
-				//  PROT_CTRL(17:16) -- 00 (None)
-				// 	PROT_RATE(15:0)  -- 0x4084 (duplicate OFDM 24M)
-				Protect[3] = 0x03f44084;
-
-				// CF20_PROT_CFG
-				//	Reserved (31:27)
-				// 	PROT_TXOP(25:20) -- 010111
-				//	PROT_NAV(19:18)  -- 01 (Short NAV protection)
-				//  PROT_CTRL(17:16) -- 00 (None)
-				// 	PROT_RATE(15:0)  -- 0x4004 (OFDM 24M)
-				Protect[4] = 0x01744004;
-
-				// CF40_PROT_CFG
-				//	Reserved (31:27)
-				// 	PROT_TXOP(25:20) -- 111111
-				//	PROT_NAV(19:18)  -- 01 (Short NAV protection)
-				//  PROT_CTRL(17:16) -- 00 (None)
-				// 	PROT_RATE(15:0)  -- 0x4084 (duplicate OFDM 24M)
-				Protect[5] = 0x03f44084;
-
-				if (bNonGFExist)
-				{
-					// PROT_NAV(19:18)  -- 01 (Short NAV protectiion)
-					// PROT_CTRL(17:16) -- 01 (RTS/CTS)
-					Protect[4] = 0x01754004;
-					Protect[5] = 0x03f54084;
-				}
-				pAd->CommonCfg.IOTestParm.bRTSLongProtOn = FALSE;
-				break;
-
- 			case 1:
-				// This is "HT non-member protection mode."
-				// If there may be non-HT STAs my BSS
-				ProtCfg.word = 0x01744004;	// PROT_CTRL(17:16) : 0 (None)
-				ProtCfg4.word = 0x03f44084; // duplicaet legacy 24M. BW set 1.
-				if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_BG_PROTECTION_INUSED))
-				{
-					ProtCfg.word = 0x01740003;	//ERP use Protection bit is set, use protection rate at Clause 18..
-					ProtCfg4.word = 0x03f40003; // Don't duplicate RTS/CTS in CCK mode. 0x03f40083;
-				}
-				//Assign Protection method for 20&40 MHz packets
-				ProtCfg.field.ProtectCtrl = ASIC_RTS;
-				ProtCfg.field.ProtectNav = ASIC_SHORTNAV;
-				ProtCfg4.field.ProtectCtrl = ASIC_RTS;
-				ProtCfg4.field.ProtectNav = ASIC_SHORTNAV;
-				Protect[2] = ProtCfg.word;
-				Protect[3] = ProtCfg4.word;
-				Protect[4] = ProtCfg.word;
-				Protect[5] = ProtCfg4.word;
-				pAd->CommonCfg.IOTestParm.bRTSLongProtOn = TRUE;
-				break;
-
-			case 2:
-				// If only HT STAs are in BSS. at least one is 20MHz. Only protect 40MHz packets
-				ProtCfg.word = 0x01744004;  // PROT_CTRL(17:16) : 0 (None)
-				ProtCfg4.word = 0x03f44084; // duplicaet legacy 24M. BW set 1.
-
-				//Assign Protection method for 40MHz packets
-				ProtCfg4.field.ProtectCtrl = ASIC_RTS;
-				ProtCfg4.field.ProtectNav = ASIC_SHORTNAV;
-				Protect[2] = ProtCfg.word;
-				Protect[3] = ProtCfg4.word;
-				if (bNonGFExist)
-				{
-					ProtCfg.field.ProtectCtrl = ASIC_RTS;
-					ProtCfg.field.ProtectNav = ASIC_SHORTNAV;
-				}
-				Protect[4] = ProtCfg.word;
-				Protect[5] = ProtCfg4.word;
-
-				pAd->CommonCfg.IOTestParm.bRTSLongProtOn = FALSE;
-				break;
-
-			case 3:
-				// HT mixed mode.	 PROTECT ALL!
-				// Assign Rate
-				ProtCfg.word = 0x01744004;	//duplicaet legacy 24M. BW set 1.
-				ProtCfg4.word = 0x03f44084;
-				// both 20MHz and 40MHz are protected. Whether use RTS or CTS-to-self depends on the
-				if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_BG_PROTECTION_INUSED))
-				{
-					ProtCfg.word = 0x01740003;	//ERP use Protection bit is set, use protection rate at Clause 18..
-					ProtCfg4.word = 0x03f40003; // Don't duplicate RTS/CTS in CCK mode. 0x03f40083
-				}
-				//Assign Protection method for 20&40 MHz packets
-				ProtCfg.field.ProtectCtrl = ASIC_RTS;
-				ProtCfg.field.ProtectNav = ASIC_SHORTNAV;
-				ProtCfg4.field.ProtectCtrl = ASIC_RTS;
-				ProtCfg4.field.ProtectNav = ASIC_SHORTNAV;
-				Protect[2] = ProtCfg.word;
-				Protect[3] = ProtCfg4.word;
-				Protect[4] = ProtCfg.word;
-				Protect[5] = ProtCfg4.word;
-				pAd->CommonCfg.IOTestParm.bRTSLongProtOn = TRUE;
-				break;
-
-			case 8:
-				// Special on for Atheros problem n chip.
-				Protect[2] = 0x01754004;
-				Protect[3] = 0x03f54084;
-				Protect[4] = 0x01754004;
-				Protect[5] = 0x03f54084;
-				pAd->CommonCfg.IOTestParm.bRTSLongProtOn = TRUE;
-				break;
-		}
-	}
-#endif // DOT11_N_SUPPORT //
-
-	offset = CCK_PROT_CFG;
-	for (i = 0;i < 6;i++)
-	{
-		if ((SetMask & (1<< i)))
-		{
-			RTMP_IO_WRITE32(pAd, offset + i*4, Protect[i]);
-		}
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AsicSwitchChannel(
-					  IN PRTMP_ADAPTER pAd,
-	IN	UCHAR			Channel,
-	IN	BOOLEAN			bScan)
-{
-	ULONG			R2 = 0, R3 = DEFAULT_RF_TX_POWER, R4 = 0;
-	CHAR    TxPwer = 0, TxPwer2 = DEFAULT_RF_TX_POWER; //Bbp94 = BBPR94_DEFAULT, TxPwer2 = DEFAULT_RF_TX_POWER;
-	UCHAR	index;
-	UINT32 	Value = 0; //BbpReg, Value;
-	RTMP_RF_REGS *RFRegTable;
-
-	// Search Tx power value
-	for (index = 0; index < pAd->ChannelListNum; index++)
-	{
-		if (Channel == pAd->ChannelList[index].Channel)
-		{
-			TxPwer = pAd->ChannelList[index].Power;
-			TxPwer2 = pAd->ChannelList[index].Power2;
-			break;
-		}
-	}
-
-	if (index == MAX_NUM_OF_CHANNELS)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("AsicSwitchChannel: Cant find the Channel#%d \n", Channel));
-	}
-
-#ifdef RT2870
-	// The RF programming sequence is difference between 3xxx and 2xxx
-	if (IS_RT3070(pAd) && ((pAd->RfIcType == RFIC_3020) || (pAd->RfIcType == RFIC_2020)))
-	{
-		/* modify by WY for Read RF Reg. error */
-		UCHAR RFValue;
-
-		for (index = 0; index < NUM_OF_3020_CHNL; index++)
-		{
-			if (Channel == FreqItems3020[index].Channel)
-			{
-				// Programming channel parameters
-				RT30xxWriteRFRegister(pAd, RF_R02, FreqItems3020[index].N);
-				RT30xxWriteRFRegister(pAd, RF_R03, FreqItems3020[index].K);
-
-				RT30xxReadRFRegister(pAd, RF_R06, (PUCHAR)&RFValue);
-				RFValue = (RFValue & 0xFC) | FreqItems3020[index].R;
-				RT30xxWriteRFRegister(pAd, RF_R06, (UCHAR)RFValue);
-
-				// Set Tx Power
-				RT30xxReadRFRegister(pAd, RF_R12, (PUCHAR)&RFValue);
-				RFValue = (RFValue & 0xE0) | TxPwer;
-				RT30xxWriteRFRegister(pAd, RF_R12, (UCHAR)RFValue);
-
-				// Set RF offset
-				RT30xxReadRFRegister(pAd, RF_R23, (PUCHAR)&RFValue);
-				RFValue = (RFValue & 0x80) | pAd->RfFreqOffset;
-				RT30xxWriteRFRegister(pAd, RF_R23, (UCHAR)RFValue);
-
-				// Set BW
-				if (!bScan && (pAd->CommonCfg.BBPCurrentBW == BW_40))
-				{
-					RFValue = pAd->Mlme.CaliBW40RfR24;
-					//DISABLE_11N_CHECK(pAd);
-				}
-				else
-				{
-					RFValue = pAd->Mlme.CaliBW20RfR24;
-				}
-				RT30xxWriteRFRegister(pAd, RF_R24, (UCHAR)RFValue);
-
-				// Enable RF tuning
-				RT30xxReadRFRegister(pAd, RF_R07, (PUCHAR)&RFValue);
-				RFValue = RFValue | 0x1;
-				RT30xxWriteRFRegister(pAd, RF_R07, (UCHAR)RFValue);
-
-				// latch channel for future usage.
-				pAd->LatchRfRegs.Channel = Channel;
-
-				break;
-			}
-		}
-
-		DBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, Pwr0=%d, Pwr1=%d, %dT), N=0x%02X, K=0x%02X, R=0x%02X\n",
-			Channel,
-			pAd->RfIcType,
-			TxPwer,
-			TxPwer2,
-			pAd->Antenna.field.TxPath,
-			FreqItems3020[index].N,
-			FreqItems3020[index].K,
-			FreqItems3020[index].R));
-	}
-	else
-#endif // RT2870 //
-	{
-		RFRegTable = RF2850RegTable;
-
-		switch (pAd->RfIcType)
-		{
-			case RFIC_2820:
-			case RFIC_2850:
-			case RFIC_2720:
-			case RFIC_2750:
-
-			for (index = 0; index < NUM_OF_2850_CHNL; index++)
-			{
-				if (Channel == RFRegTable[index].Channel)
-				{
-					R2 = RFRegTable[index].R2;
-					if (pAd->Antenna.field.TxPath == 1)
-					{
-						R2 |= 0x4000;	// If TXpath is 1, bit 14 = 1;
-					}
-
-					if (pAd->Antenna.field.RxPath == 2)
-					{
-						R2 |= 0x40;	// write 1 to off Rxpath.
-					}
-					else if (pAd->Antenna.field.RxPath == 1)
-					{
-						R2 |= 0x20040;	// write 1 to off RxPath
-					}
-
-					if (Channel > 14)
-					{
-						// initialize R3, R4
-						R3 = (RFRegTable[index].R3 & 0xffffc1ff);
-						R4 = (RFRegTable[index].R4 & (~0x001f87c0)) | (pAd->RfFreqOffset << 15);
-
-						// 5G band power range: 0xF9~0X0F, TX0 Reg3 bit9/TX1 Reg4 bit6="0" means the TX power reduce 7dB
-						// R3
-						if ((TxPwer >= -7) && (TxPwer < 0))
-						{
-							TxPwer = (7+TxPwer);
-							TxPwer = (TxPwer > 0xF) ? (0xF) : (TxPwer);
-							R3 |= (TxPwer << 10);
-							DBGPRINT(RT_DEBUG_ERROR, ("AsicSwitchChannel: TxPwer=%d \n", TxPwer));
-						}
-						else
-						{
-							TxPwer = (TxPwer > 0xF) ? (0xF) : (TxPwer);
-							R3 |= (TxPwer << 10) | (1 << 9);
-						}
-
-						// R4
-						if ((TxPwer2 >= -7) && (TxPwer2 < 0))
-						{
-							TxPwer2 = (7+TxPwer2);
-							TxPwer2 = (TxPwer2 > 0xF) ? (0xF) : (TxPwer2);
-							R4 |= (TxPwer2 << 7);
-							DBGPRINT(RT_DEBUG_ERROR, ("AsicSwitchChannel: TxPwer2=%d \n", TxPwer2));
-						}
-						else
-						{
-							TxPwer2 = (TxPwer2 > 0xF) ? (0xF) : (TxPwer2);
-							R4 |= (TxPwer2 << 7) | (1 << 6);
-						}
-					}
-					else
-					{
-						R3 = (RFRegTable[index].R3 & 0xffffc1ff) | (TxPwer << 9); // set TX power0
-					R4 = (RFRegTable[index].R4 & (~0x001f87c0)) | (pAd->RfFreqOffset << 15) | (TxPwer2 <<6);// Set freq Offset & TxPwr1
-					}
-
-					// Based on BBP current mode before changing RF channel.
-					if (!bScan && (pAd->CommonCfg.BBPCurrentBW == BW_40))
-					{
-						R4 |=0x200000;
-					}
-
-					// Update variables
-					pAd->LatchRfRegs.Channel = Channel;
-					pAd->LatchRfRegs.R1 = RFRegTable[index].R1;
-					pAd->LatchRfRegs.R2 = R2;
-					pAd->LatchRfRegs.R3 = R3;
-					pAd->LatchRfRegs.R4 = R4;
-
-					// Set RF value 1's set R3[bit2] = [0]
-					RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1);
-					RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2);
-					RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 & (~0x04)));
-					RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4);
-
-					RTMPusecDelay(200);
-
-					// Set RF value 2's set R3[bit2] = [1]
-					RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1);
-					RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2);
-					RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 | 0x04));
-					RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4);
-
-					RTMPusecDelay(200);
-
-					// Set RF value 3's set R3[bit2] = [0]
-					RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1);
-					RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2);
-					RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 & (~0x04)));
-					RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4);
-
-					break;
-				}
-			}
-			break;
-
-			default:
-			break;
-		}
-	}
-
-	// Change BBP setting during siwtch from a->g, g->a
-	if (Channel <= 14)
-	{
-	    ULONG	TxPinCfg = 0x00050F0A;//Gary 2007/08/09 0x050A0A
-
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R62, (0x37 - GET_LNA_GAIN(pAd)));
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R63, (0x37 - GET_LNA_GAIN(pAd)));
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R64, (0x37 - GET_LNA_GAIN(pAd)));
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0);//(0x44 - GET_LNA_GAIN(pAd)));	// According the Rory's suggestion to solve the middle range issue.
-		//RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0x62);
-
-		// Rx High power VGA offset for LNA select
-	    if (pAd->NicConfig2.field.ExternalLNAForG)
-	    {
-	        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0x62);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R75, 0x46);
-	    }
-	    else
-	    {
-	        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0x84);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R75, 0x50);
-	    }
-
-		// 5G band selection PIN, bit1 and bit2 are complement
-		RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
-		Value &= (~0x6);
-		Value |= (0x04);
-		RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
-
-        // Turn off unused PA or LNA when only 1T or 1R
-		if (pAd->Antenna.field.TxPath == 1)
-		{
-			TxPinCfg &= 0xFFFFFFF3;
-		}
-		if (pAd->Antenna.field.RxPath == 1)
-		{
-			TxPinCfg &= 0xFFFFF3FF;
-		}
-
-		RTMP_IO_WRITE32(pAd, TX_PIN_CFG, TxPinCfg);
-	}
-	else
-	{
-	    ULONG	TxPinCfg = 0x00050F05;//Gary 2007/8/9 0x050505
-
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R62, (0x37 - GET_LNA_GAIN(pAd)));
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R63, (0x37 - GET_LNA_GAIN(pAd)));
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R64, (0x37 - GET_LNA_GAIN(pAd)));
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0);//(0x44 - GET_LNA_GAIN(pAd)));   // According the Rory's suggestion to solve the middle range issue.
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0xF2);
-
-		// Rx High power VGA offset for LNA select
-		if (pAd->NicConfig2.field.ExternalLNAForA)
-		{
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R75, 0x46);
-		}
-		else
-		{
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R75, 0x50);
-		}
-
-		// 5G band selection PIN, bit1 and bit2 are complement
-		RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
-		Value &= (~0x6);
-		Value |= (0x02);
-		RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
-
-        // Turn off unused PA or LNA when only 1T or 1R
-		if (pAd->Antenna.field.TxPath == 1)
-		{
-			TxPinCfg &= 0xFFFFFFF3;
-	}
-		if (pAd->Antenna.field.RxPath == 1)
-		{
-			TxPinCfg &= 0xFFFFF3FF;
-	}
-
-		RTMP_IO_WRITE32(pAd, TX_PIN_CFG, TxPinCfg);
-	}
-
-    // R66 should be set according to Channel and use 20MHz when scanning
-	//RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, (0x2E + GET_LNA_GAIN(pAd)));
-	if (bScan)
-		RTMPSetAGCInitValue(pAd, BW_20);
-	else
-		RTMPSetAGCInitValue(pAd, pAd->CommonCfg.BBPCurrentBW);
-
-	//
-	// On 11A, We should delay and wait RF/BBP to be stable
-	// and the appropriate time should be 1000 micro seconds
-	// 2005/06/05 - On 11G, We also need this delay time. Otherwise it's difficult to pass the WHQL.
-	//
-	RTMPusecDelay(1000);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, Pwr0=%lu, Pwr1=%lu, %dT) to , R1=0x%08lx, R2=0x%08lx, R3=0x%08lx, R4=0x%08lx\n",
-							  Channel,
-							  pAd->RfIcType,
-							  (R3 & 0x00003e00) >> 9,
-							  (R4 & 0x000007c0) >> 6,
-							  pAd->Antenna.field.TxPath,
-							  pAd->LatchRfRegs.R1,
-							  pAd->LatchRfRegs.R2,
-							  pAd->LatchRfRegs.R3,
-							  pAd->LatchRfRegs.R4));
-}
-
-/*
-	==========================================================================
-	Description:
-		This function is required for 2421 only, and should not be used during
-		site survey. It's only required after NIC decided to stay at a channel
-		for a longer period.
-		When this function is called, it's always after AsicSwitchChannel().
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AsicLockChannel(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR Channel)
-{
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID	AsicAntennaSelect(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			Channel)
-{
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Antenna miscellaneous setting.
-
-	Arguments:
-		pAd						Pointer to our adapter
-		BandState				Indicate current Band State.
-
-	Return Value:
-		None
-
-	IRQL <= DISPATCH_LEVEL
-
-	Note:
-		1.) Frame End type control
-			only valid for G only (RF_2527 & RF_2529)
-			0: means DPDT, set BBP R4 bit 5 to 1
-			1: means SPDT, set BBP R4 bit 5 to 0
-
-
-	========================================================================
-*/
-VOID	AsicAntennaSetting(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	ABGBAND_STATE	BandState)
-{
-}
-
-VOID AsicRfTuningExec(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3)
-{
-}
-
-/*
-	==========================================================================
-	Description:
-		Gives CCK TX rate 2 more dB TX power.
-		This routine works only in LINK UP in INFRASTRUCTURE mode.
-
-		calculate desired Tx power in RF R3.Tx0~5,	should consider -
-		0. if current radio is a noisy environment (pAd->DrsCounters.fNoisyEnvironment)
-		1. TxPowerPercentage
-		2. auto calibration based on TSSI feedback
-		3. extra 2 db for CCK
-		4. -10 db upon very-short distance (AvgRSSI >= -40db) to AP
-
-	NOTE: Since this routine requires the value of (pAd->DrsCounters.fNoisyEnvironment),
-		it should be called AFTER MlmeDynamicTxRatSwitching()
-	==========================================================================
- */
-VOID AsicAdjustTxPower(
-	IN PRTMP_ADAPTER pAd)
-{
-	INT			i, j;
-	CHAR		DeltaPwr = 0;
-	BOOLEAN		bAutoTxAgc = FALSE;
-	UCHAR		TssiRef, *pTssiMinusBoundary, *pTssiPlusBoundary, TxAgcStep;
-	UCHAR		BbpR1 = 0, BbpR49 = 0, idx;
-	PCHAR		pTxAgcCompensate;
-	ULONG		TxPwr[5];
-	CHAR		Value;
-
-	if (pAd->CommonCfg.BBPCurrentBW == BW_40)
-	{
-		if (pAd->CommonCfg.CentralChannel > 14)
-		{
-			TxPwr[0] = pAd->Tx40MPwrCfgABand[0];
-			TxPwr[1] = pAd->Tx40MPwrCfgABand[1];
-			TxPwr[2] = pAd->Tx40MPwrCfgABand[2];
-			TxPwr[3] = pAd->Tx40MPwrCfgABand[3];
-			TxPwr[4] = pAd->Tx40MPwrCfgABand[4];
-		}
-		else
-		{
-			TxPwr[0] = pAd->Tx40MPwrCfgGBand[0];
-			TxPwr[1] = pAd->Tx40MPwrCfgGBand[1];
-			TxPwr[2] = pAd->Tx40MPwrCfgGBand[2];
-			TxPwr[3] = pAd->Tx40MPwrCfgGBand[3];
-			TxPwr[4] = pAd->Tx40MPwrCfgGBand[4];
-		}
-	}
-	else
-	{
-		if (pAd->CommonCfg.Channel > 14)
-		{
-			TxPwr[0] = pAd->Tx20MPwrCfgABand[0];
-			TxPwr[1] = pAd->Tx20MPwrCfgABand[1];
-			TxPwr[2] = pAd->Tx20MPwrCfgABand[2];
-			TxPwr[3] = pAd->Tx20MPwrCfgABand[3];
-			TxPwr[4] = pAd->Tx20MPwrCfgABand[4];
-		}
-		else
-		{
-			TxPwr[0] = pAd->Tx20MPwrCfgGBand[0];
-			TxPwr[1] = pAd->Tx20MPwrCfgGBand[1];
-			TxPwr[2] = pAd->Tx20MPwrCfgGBand[2];
-			TxPwr[3] = pAd->Tx20MPwrCfgGBand[3];
-			TxPwr[4] = pAd->Tx20MPwrCfgGBand[4];
-		}
-	}
-
-	// TX power compensation for temperature variation based on TSSI. try every 4 second
-	if (pAd->Mlme.OneSecPeriodicRound % 4 == 0)
-	{
-		if (pAd->CommonCfg.Channel <= 14)
-		{
-			/* bg channel */
-			bAutoTxAgc         = pAd->bAutoTxAgcG;
-			TssiRef            = pAd->TssiRefG;
-			pTssiMinusBoundary = &pAd->TssiMinusBoundaryG[0];
-			pTssiPlusBoundary  = &pAd->TssiPlusBoundaryG[0];
-			TxAgcStep          = pAd->TxAgcStepG;
-			pTxAgcCompensate   = &pAd->TxAgcCompensateG;
-		}
-		else
-		{
-			/* a channel */
-			bAutoTxAgc         = pAd->bAutoTxAgcA;
-			TssiRef            = pAd->TssiRefA;
-			pTssiMinusBoundary = &pAd->TssiMinusBoundaryA[0];
-			pTssiPlusBoundary  = &pAd->TssiPlusBoundaryA[0];
-			TxAgcStep          = pAd->TxAgcStepA;
-			pTxAgcCompensate   = &pAd->TxAgcCompensateA;
-		}
-
-		if (bAutoTxAgc)
-		{
-			/* BbpR1 is unsigned char */
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R49, &BbpR49);
-
-			/* (p) TssiPlusBoundaryG[0] = 0 = (m) TssiMinusBoundaryG[0] */
-			/* compensate: +4     +3   +2   +1    0   -1   -2   -3   -4 * steps */
-			/* step value is defined in pAd->TxAgcStepG for tx power value */
-
-			/* [4]+1+[4]   p4     p3   p2   p1   o1   m1   m2   m3   m4 */
-			/* ex:         0x00 0x15 0x25 0x45 0x88 0xA0 0xB5 0xD0 0xF0
-			   above value are examined in mass factory production */
-			/*             [4]    [3]  [2]  [1]  [0]  [1]  [2]  [3]  [4] */
-
-			/* plus (+) is 0x00 ~ 0x45, minus (-) is 0xa0 ~ 0xf0 */
-			/* if value is between p1 ~ o1 or o1 ~ s1, no need to adjust tx power */
-			/* if value is 0xa5, tx power will be -= TxAgcStep*(2-1) */
-
-			if (BbpR49 > pTssiMinusBoundary[1])
-			{
-				// Reading is larger than the reference value
-				// check for how large we need to decrease the Tx power
-				for (idx = 1; idx < 5; idx++)
-				{
-					if (BbpR49 <= pTssiMinusBoundary[idx])  // Found the range
-						break;
-				}
-				// The index is the step we should decrease, idx = 0 means there is nothing to compensate
-//				if (R3 > (ULONG) (TxAgcStep * (idx-1)))
-					*pTxAgcCompensate = -(TxAgcStep * (idx-1));
-//				else
-//					*pTxAgcCompensate = -((UCHAR)R3);
-
-				DeltaPwr += (*pTxAgcCompensate);
-				DBGPRINT(RT_DEBUG_TRACE, ("-- Tx Power, BBP R1=%x, TssiRef=%x, TxAgcStep=%x, step = -%d\n",
-					BbpR49, TssiRef, TxAgcStep, idx-1));
-			}
-			else if (BbpR49 < pTssiPlusBoundary[1])
-			{
-				// Reading is smaller than the reference value
-				// check for how large we need to increase the Tx power
-				for (idx = 1; idx < 5; idx++)
-				{
-					if (BbpR49 >= pTssiPlusBoundary[idx])   // Found the range
-						break;
-				}
-				// The index is the step we should increase, idx = 0 means there is nothing to compensate
-				*pTxAgcCompensate = TxAgcStep * (idx-1);
-				DeltaPwr += (*pTxAgcCompensate);
-				DBGPRINT(RT_DEBUG_TRACE, ("++ Tx Power, BBP R1=%x, TssiRef=%x, TxAgcStep=%x, step = +%d\n",
-					BbpR49, TssiRef, TxAgcStep, idx-1));
-			}
-			else
-			{
-				*pTxAgcCompensate = 0;
-				DBGPRINT(RT_DEBUG_TRACE, ("   Tx Power, BBP R49=%x, TssiRef=%x, TxAgcStep=%x, step = +%d\n",
-					BbpR49, TssiRef, TxAgcStep, 0));
-			}
-		}
-	}
-	else
-	{
-		if (pAd->CommonCfg.Channel <= 14)
-		{
-			bAutoTxAgc         = pAd->bAutoTxAgcG;
-			pTxAgcCompensate   = &pAd->TxAgcCompensateG;
-		}
-		else
-		{
-			bAutoTxAgc         = pAd->bAutoTxAgcA;
-			pTxAgcCompensate   = &pAd->TxAgcCompensateA;
-		}
-
-		if (bAutoTxAgc)
-			DeltaPwr += (*pTxAgcCompensate);
-	}
-
-	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BbpR1);
-	BbpR1 &= 0xFC;
-
-#ifdef SINGLE_SKU
-	// Handle regulatory max tx power constrain
-	do
-	{
-		UCHAR    TxPwrInEEPROM = 0xFF, CountryTxPwr = 0xFF, criterion;
-		UCHAR    AdjustMaxTxPwr[40];
-
-		if (pAd->CommonCfg.Channel > 14) // 5G band
-			TxPwrInEEPROM = ((pAd->CommonCfg.DefineMaxTxPwr & 0xFF00) >> 8);
-		else // 2.4G band
-			TxPwrInEEPROM = (pAd->CommonCfg.DefineMaxTxPwr & 0x00FF);
-		CountryTxPwr = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
-
-		// error handling, range check
-		if ((TxPwrInEEPROM > 0x50) || (CountryTxPwr > 0x50))
-		{
-			DBGPRINT(RT_DEBUG_ERROR,("AsicAdjustTxPower - Invalid max tx power (=0x%02x), CountryTxPwr=%d\n", TxPwrInEEPROM, CountryTxPwr));
-			break;
-		}
-
-		criterion = *((PUCHAR)TxPwr + 2) & 0xF;        // FAE use OFDM 6M as criterion
-
-		DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (criterion=%d, TxPwrInEEPROM=%d, CountryTxPwr=%d)\n", criterion, TxPwrInEEPROM, CountryTxPwr));
-
-		// Adjust max tx power according to the relationship of tx power in E2PROM
-		for (i=0; i<5; i++)
-		{
-			// CCK will have 4dBm larger than OFDM
-			// Therefore, we should separate to parse the tx power field
-			if (i == 0)
-			{
-				for (j=0; j<8; j++)
-				{
-					Value = (CHAR)((TxPwr[i] >> j*4) & 0x0F);
-
-					if (j < 4)
-					{
-						// CCK will have 4dBm larger than OFDM
-						AdjustMaxTxPwr[i*8+j] = TxPwrInEEPROM + (Value - criterion) + 4;
-					}
-					else
-					{
-						AdjustMaxTxPwr[i*8+j] = TxPwrInEEPROM + (Value - criterion);
-					}
-					DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (i/j=%d/%d, Value=%d, %d)\n", i, j, Value, AdjustMaxTxPwr[i*8+j]));
-				}
-			}
-			else
-			{
-				for (j=0; j<8; j++)
-				{
-					Value = (CHAR)((TxPwr[i] >> j*4) & 0x0F);
-
-					AdjustMaxTxPwr[i*8+j] = TxPwrInEEPROM + (Value - criterion);
-					DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (i/j=%d/%d, Value=%d, %d)\n", i, j, Value, AdjustMaxTxPwr[i*8+j]));
-				}
-			}
-		}
-
-		// Adjust tx power according to the relationship
-		for (i=0; i<5; i++)
-		{
-			if (TxPwr[i] != 0xffffffff)
-			{
-				for (j=0; j<8; j++)
-				{
-					Value = (CHAR)((TxPwr[i] >> j*4) & 0x0F);
-
-					// The system tx power is larger than the regulatory, the power should be restrain
-					if (AdjustMaxTxPwr[i*8+j] > CountryTxPwr)
-					{
-						// decrease to zero and don't need to take care BBPR1
-						if ((Value - (AdjustMaxTxPwr[i*8+j] - CountryTxPwr)) > 0)
-							Value -= (AdjustMaxTxPwr[i*8+j] - CountryTxPwr);
-						else
-							Value = 0;
-
-						DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (i/j=%d/%d, Value=%d, %d)\n", i, j, Value, AdjustMaxTxPwr[i*8+j]));
-					}
-					else
-						DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (i/j=%d/%d, Value=%d, %d, no change)\n", i, j, Value, AdjustMaxTxPwr[i*8+j]));
-
-						TxPwr[i] = (TxPwr[i] & ~(0x0000000F << j*4)) | (Value << j*4);
-				}
-			}
-		}
-	} while (FALSE);
-#endif // SINGLE_SKU //
-
-	/* calculate delta power based on the percentage specified from UI */
-	// E2PROM setting is calibrated for maximum TX power (i.e. 100%)
-	// We lower TX power here according to the percentage specified from UI
-	if (pAd->CommonCfg.TxPowerPercentage == 0xffffffff)       // AUTO TX POWER control
-		;
-	else if (pAd->CommonCfg.TxPowerPercentage > 90)  // 91 ~ 100% & AUTO, treat as 100% in terms of mW
-		;
-	else if (pAd->CommonCfg.TxPowerPercentage > 60)  // 61 ~ 90%, treat as 75% in terms of mW		// DeltaPwr -= 1;
-	{
-		DeltaPwr -= 1;
-	}
-	else if (pAd->CommonCfg.TxPowerPercentage > 30)  // 31 ~ 60%, treat as 50% in terms of mW		// DeltaPwr -= 3;
-	{
-		DeltaPwr -= 3;
-	}
-	else if (pAd->CommonCfg.TxPowerPercentage > 15)  // 16 ~ 30%, treat as 25% in terms of mW		// DeltaPwr -= 6;
-	{
-		BbpR1 |= 0x01;
-	}
-	else if (pAd->CommonCfg.TxPowerPercentage > 9)   // 10 ~ 15%, treat as 12.5% in terms of mW		// DeltaPwr -= 9;
-	{
-		BbpR1 |= 0x01;
-		DeltaPwr -= 3;
-	}
-	else                                           // 0 ~ 9 %, treat as MIN(~3%) in terms of mW		// DeltaPwr -= 12;
-	{
-		BbpR1 |= 0x02;
-	}
-
-	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BbpR1);
-
-	/* reset different new tx power for different TX rate */
-	for(i=0; i<5; i++)
-	{
-		if (TxPwr[i] != 0xffffffff)
-		{
-			for (j=0; j<8; j++)
-			{
-				Value = (CHAR)((TxPwr[i] >> j*4) & 0x0F); /* 0 ~ 15 */
-
-				if ((Value + DeltaPwr) < 0)
-				{
-					Value = 0; /* min */
-				}
-				else if ((Value + DeltaPwr) > 0xF)
-				{
-					Value = 0xF; /* max */
-				}
-				else
-				{
-					Value += DeltaPwr; /* temperature compensation */
-				}
-
-				/* fill new value to CSR offset */
-				TxPwr[i] = (TxPwr[i] & ~(0x0000000F << j*4)) | (Value << j*4);
-			}
-
-			/* write tx power value to CSR */
-			/* TX_PWR_CFG_0 (8 tx rate) for	TX power for OFDM 12M/18M
-											TX power for OFDM 6M/9M
-											TX power for CCK5.5M/11M
-											TX power for CCK1M/2M */
-			/* TX_PWR_CFG_1 ~ TX_PWR_CFG_4 */
-			RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, TxPwr[i]);
-		}
-	}
-
-}
-
-#ifdef CONFIG_STA_SUPPORT
-/*
-	==========================================================================
-	Description:
-		put PHY to sleep here, and set next wakeup timer. PHY doesn't not wakeup
-		automatically. Instead, MCU will issue a TwakeUpInterrupt to host after
-		the wakeup timer timeout. Driver has to issue a separate command to wake
-		PHY up.
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AsicSleepThenAutoWakeup(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT TbttNumToNextWakeUp)
-{
-    RT28XX_STA_SLEEP_THEN_AUTO_WAKEUP(pAd, TbttNumToNextWakeUp);
-}
-
-/*
-	==========================================================================
-	Description:
-		AsicForceWakeup() is used whenever manual wakeup is required
-		AsicForceSleep() should only be used when not in INFRA BSS. When
-		in INFRA BSS, we should use AsicSleepThenAutoWakeup() instead.
-	==========================================================================
- */
-VOID AsicForceSleep(
-	IN PRTMP_ADAPTER pAd)
-{
-
-}
-
-/*
-	==========================================================================
-	Description:
-		AsicForceWakeup() is used whenever Twakeup timer (set via AsicSleepThenAutoWakeup)
-		expired.
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-	==========================================================================
- */
-VOID AsicForceWakeup(
-	IN PRTMP_ADAPTER pAd,
-	IN BOOLEAN    bFromTx)
-{
-    DBGPRINT(RT_DEBUG_TRACE, ("--> AsicForceWakeup \n"));
-    RT28XX_STA_FORCE_WAKEUP(pAd, bFromTx);
-}
-#endif // CONFIG_STA_SUPPORT //
-/*
-	==========================================================================
-	Description:
-		Set My BSSID
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AsicSetBssid(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pBssid)
-{
-	ULONG		  Addr4;
-	DBGPRINT(RT_DEBUG_TRACE, ("==============> AsicSetBssid %x:%x:%x:%x:%x:%x\n",
-		pBssid[0],pBssid[1],pBssid[2],pBssid[3], pBssid[4],pBssid[5]));
-
-	Addr4 = (ULONG)(pBssid[0])		 |
-			(ULONG)(pBssid[1] << 8)  |
-			(ULONG)(pBssid[2] << 16) |
-			(ULONG)(pBssid[3] << 24);
-	RTMP_IO_WRITE32(pAd, MAC_BSSID_DW0, Addr4);
-
-	Addr4 = 0;
-	// always one BSSID in STA mode
-	Addr4 = (ULONG)(pBssid[4]) | (ULONG)(pBssid[5] << 8);
-
-	RTMP_IO_WRITE32(pAd, MAC_BSSID_DW1, Addr4);
-}
-
-VOID AsicSetMcastWC(
-	IN PRTMP_ADAPTER pAd)
-{
-	MAC_TABLE_ENTRY *pEntry = &pAd->MacTab.Content[MCAST_WCID];
-	USHORT		offset;
-
-	pEntry->Sst        = SST_ASSOC;
-	pEntry->Aid        = MCAST_WCID;	// Softap supports 1 BSSID and use WCID=0 as multicast Wcid index
-	pEntry->PsMode     = PWR_ACTIVE;
-	pEntry->CurrTxRate = pAd->CommonCfg.MlmeRate;
-	offset = MAC_WCID_BASE + BSS0Mcast_WCID * HW_WCID_ENTRY_SIZE;
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AsicDelWcidTab(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR	Wcid)
-{
-	ULONG		  Addr0 = 0x0, Addr1 = 0x0;
-	ULONG 		offset;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("AsicDelWcidTab==>Wcid = 0x%x\n",Wcid));
-	offset = MAC_WCID_BASE + Wcid * HW_WCID_ENTRY_SIZE;
-	RTMP_IO_WRITE32(pAd, offset, Addr0);
-	offset += 4;
-	RTMP_IO_WRITE32(pAd, offset, Addr1);
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AsicEnableRDG(
-	IN PRTMP_ADAPTER pAd)
-{
-	TX_LINK_CFG_STRUC	TxLinkCfg;
-	UINT32				Data = 0;
-
-	RTMP_IO_READ32(pAd, TX_LINK_CFG, &TxLinkCfg.word);
-	TxLinkCfg.field.TxRDGEn = 1;
-	RTMP_IO_WRITE32(pAd, TX_LINK_CFG, TxLinkCfg.word);
-
-	RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &Data);
-	Data  &= 0xFFFFFF00;
-	Data  |= 0x80;
-	RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, Data);
-
-	//OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED);
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AsicDisableRDG(
-	IN PRTMP_ADAPTER pAd)
-{
-	TX_LINK_CFG_STRUC	TxLinkCfg;
-	UINT32				Data = 0;
-
-
-	RTMP_IO_READ32(pAd, TX_LINK_CFG, &TxLinkCfg.word);
-	TxLinkCfg.field.TxRDGEn = 0;
-	RTMP_IO_WRITE32(pAd, TX_LINK_CFG, TxLinkCfg.word);
-
-	RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &Data);
-
-	Data  &= 0xFFFFFF00;
-	//Data  |= 0x20;
-#ifndef WIFI_TEST
-	//if ( pAd->CommonCfg.bEnableTxBurst )
-	//	Data |= 0x60; // for performance issue not set the TXOP to 0
-#endif
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_DYNAMIC_BE_TXOP_ACTIVE)
-#ifdef DOT11_N_SUPPORT
-		&& (pAd->MacTab.fAnyStationMIMOPSDynamic == FALSE)
-#endif // DOT11_N_SUPPORT //
-	)
-	{
-		// For CWC test, change txop from 0x30 to 0x20 in TxBurst mode
-		if (pAd->CommonCfg.bEnableTxBurst)
-			Data |= 0x20;
-	}
-	RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, Data);
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AsicDisableSync(
-	IN PRTMP_ADAPTER pAd)
-{
-	BCN_TIME_CFG_STRUC csr;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("--->Disable TSF synchronization\n"));
-
-	// 2003-12-20 disable TSF and TBTT while NIC in power-saving have side effect
-	//			  that NIC will never wakes up because TSF stops and no more
-	//			  TBTT interrupts
-	pAd->TbttTickCount = 0;
-	RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr.word);
-	csr.field.bBeaconGen = 0;
-	csr.field.bTBTTEnable = 0;
-	csr.field.TsfSyncMode = 0;
-	csr.field.bTsfTicking = 0;
-	RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr.word);
-
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AsicEnableBssSync(
-	IN PRTMP_ADAPTER pAd)
-{
-	BCN_TIME_CFG_STRUC csr;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("--->AsicEnableBssSync(INFRA mode)\n"));
-
-	RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr.word);
-//	RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, 0x00000000);
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		csr.field.BeaconInterval = pAd->CommonCfg.BeaconPeriod << 4; // ASIC register in units of 1/16 TU
-		csr.field.bTsfTicking = 1;
-		csr.field.TsfSyncMode = 1; // sync TSF in INFRASTRUCTURE mode
-		csr.field.bBeaconGen  = 0; // do NOT generate BEACON
-		csr.field.bTBTTEnable = 1;
-	}
-#endif // CONFIG_STA_SUPPORT //
-	RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr.word);
-}
-
-/*
-	==========================================================================
-	Description:
-	Note:
-		BEACON frame in shared memory should be built ok before this routine
-		can be called. Otherwise, a garbage frame maybe transmitted out every
-		Beacon period.
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AsicEnableIbssSync(
-	IN PRTMP_ADAPTER pAd)
-{
-	BCN_TIME_CFG_STRUC csr9;
-	PUCHAR			ptr;
-	UINT i;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("--->AsicEnableIbssSync(ADHOC mode. MPDUtotalByteCount = %d)\n", pAd->BeaconTxWI.MPDUtotalByteCount));
-
-	RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr9.word);
-	csr9.field.bBeaconGen = 0;
-	csr9.field.bTBTTEnable = 0;
-	csr9.field.bTsfTicking = 0;
-	RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr9.word);
-
-
-#ifdef RT2870
-	// move BEACON TXD and frame content to on-chip memory
-	ptr = (PUCHAR)&pAd->BeaconTxWI;
-	for (i=0; i<TXWI_SIZE; i+=2)  // 16-byte TXWI field
-	{
-		//UINT32 longptr =  *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
-		//RTMP_IO_WRITE32(pAd, HW_BEACON_BASE0 + i, longptr);
-		RTUSBMultiWrite(pAd, HW_BEACON_BASE0 + i, ptr, 2);
-		ptr += 2;
-	}
-
-	// start right after the 16-byte TXWI field
-	ptr = pAd->BeaconBuf;
-	for (i=0; i< pAd->BeaconTxWI.MPDUtotalByteCount; i+=2)
-	{
-		//UINT32 longptr =  *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
-		//RTMP_IO_WRITE32(pAd, HW_BEACON_BASE0 + TXWI_SIZE + i, longptr);
-		RTUSBMultiWrite(pAd, HW_BEACON_BASE0 + TXWI_SIZE + i, ptr, 2);
-		ptr +=2;
-	}
-#endif // RT2870 //
-
-	//
-	// For Wi-Fi faily generated beacons between participating stations.
-	// Set TBTT phase adaptive adjustment step to 8us (default 16us)
-	// don't change settings 2006-5- by Jerry
-	//RTMP_IO_WRITE32(pAd, TBTT_SYNC_CFG, 0x00001010);
-
-	// start sending BEACON
-	csr9.field.BeaconInterval = pAd->CommonCfg.BeaconPeriod << 4; // ASIC register in units of 1/16 TU
-	csr9.field.bTsfTicking = 1;
-	csr9.field.TsfSyncMode = 2; // sync TSF in IBSS mode
-	csr9.field.bTBTTEnable = 1;
-	csr9.field.bBeaconGen = 1;
-	RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr9.word);
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AsicSetEdcaParm(
-	IN PRTMP_ADAPTER pAd,
-	IN PEDCA_PARM	 pEdcaParm)
-{
-	EDCA_AC_CFG_STRUC   Ac0Cfg, Ac1Cfg, Ac2Cfg, Ac3Cfg;
-	AC_TXOP_CSR0_STRUC csr0;
-	AC_TXOP_CSR1_STRUC csr1;
-	AIFSN_CSR_STRUC    AifsnCsr;
-	CWMIN_CSR_STRUC    CwminCsr;
-	CWMAX_CSR_STRUC    CwmaxCsr;
-	int i;
-
-	Ac0Cfg.word = 0;
-	Ac1Cfg.word = 0;
-	Ac2Cfg.word = 0;
-	Ac3Cfg.word = 0;
-	if ((pEdcaParm == NULL) || (pEdcaParm->bValid == FALSE))
-	{
-		DBGPRINT(RT_DEBUG_TRACE,("AsicSetEdcaParm\n"));
-		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_WMM_INUSED);
-		for (i=0; i<MAX_LEN_OF_MAC_TABLE; i++)
-		{
-			if (pAd->MacTab.Content[i].ValidAsCLI || pAd->MacTab.Content[i].ValidAsApCli)
-				CLIENT_STATUS_CLEAR_FLAG(&pAd->MacTab.Content[i], fCLIENT_STATUS_WMM_CAPABLE);
-		}
-
-		//========================================================
-		//      MAC Register has a copy .
-		//========================================================
-//#ifndef WIFI_TEST
-		if( pAd->CommonCfg.bEnableTxBurst )
-		{
-			// For CWC test, change txop from 0x30 to 0x20 in TxBurst mode
-			Ac0Cfg.field.AcTxop = 0x20; // Suggest by John for TxBurst in HT Mode
-		}
-		else
-			Ac0Cfg.field.AcTxop = 0;	// QID_AC_BE
-//#else
-//		Ac0Cfg.field.AcTxop = 0;	// QID_AC_BE
-//#endif
-		Ac0Cfg.field.Cwmin = CW_MIN_IN_BITS;
-		Ac0Cfg.field.Cwmax = CW_MAX_IN_BITS;
-		Ac0Cfg.field.Aifsn = 2;
-		RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, Ac0Cfg.word);
-
-		Ac1Cfg.field.AcTxop = 0;	// QID_AC_BK
-		Ac1Cfg.field.Cwmin = CW_MIN_IN_BITS;
-		Ac1Cfg.field.Cwmax = CW_MAX_IN_BITS;
-		Ac1Cfg.field.Aifsn = 2;
-		RTMP_IO_WRITE32(pAd, EDCA_AC1_CFG, Ac1Cfg.word);
-
-		if (pAd->CommonCfg.PhyMode == PHY_11B)
-		{
-			Ac2Cfg.field.AcTxop = 192;	// AC_VI: 192*32us ~= 6ms
-			Ac3Cfg.field.AcTxop = 96;	// AC_VO: 96*32us  ~= 3ms
-		}
-		else
-		{
-			Ac2Cfg.field.AcTxop = 96;	// AC_VI: 96*32us ~= 3ms
-			Ac3Cfg.field.AcTxop = 48;	// AC_VO: 48*32us ~= 1.5ms
-		}
-		Ac2Cfg.field.Cwmin = CW_MIN_IN_BITS;
-		Ac2Cfg.field.Cwmax = CW_MAX_IN_BITS;
-		Ac2Cfg.field.Aifsn = 2;
-		RTMP_IO_WRITE32(pAd, EDCA_AC2_CFG, Ac2Cfg.word);
-		Ac3Cfg.field.Cwmin = CW_MIN_IN_BITS;
-		Ac3Cfg.field.Cwmax = CW_MAX_IN_BITS;
-		Ac3Cfg.field.Aifsn = 2;
-		RTMP_IO_WRITE32(pAd, EDCA_AC3_CFG, Ac3Cfg.word);
-
-		//========================================================
-		//      DMA Register has a copy too.
-		//========================================================
-		csr0.field.Ac0Txop = 0;		// QID_AC_BE
-		csr0.field.Ac1Txop = 0;		// QID_AC_BK
-		RTMP_IO_WRITE32(pAd, WMM_TXOP0_CFG, csr0.word);
-		if (pAd->CommonCfg.PhyMode == PHY_11B)
-		{
-			csr1.field.Ac2Txop = 192;		// AC_VI: 192*32us ~= 6ms
-			csr1.field.Ac3Txop = 96;		// AC_VO: 96*32us  ~= 3ms
-		}
-		else
-		{
-			csr1.field.Ac2Txop = 96;		// AC_VI: 96*32us ~= 3ms
-			csr1.field.Ac3Txop = 48;		// AC_VO: 48*32us ~= 1.5ms
-		}
-		RTMP_IO_WRITE32(pAd, WMM_TXOP1_CFG, csr1.word);
-
-		CwminCsr.word = 0;
-		CwminCsr.field.Cwmin0 = CW_MIN_IN_BITS;
-		CwminCsr.field.Cwmin1 = CW_MIN_IN_BITS;
-		CwminCsr.field.Cwmin2 = CW_MIN_IN_BITS;
-		CwminCsr.field.Cwmin3 = CW_MIN_IN_BITS;
-		RTMP_IO_WRITE32(pAd, WMM_CWMIN_CFG, CwminCsr.word);
-
-		CwmaxCsr.word = 0;
-		CwmaxCsr.field.Cwmax0 = CW_MAX_IN_BITS;
-		CwmaxCsr.field.Cwmax1 = CW_MAX_IN_BITS;
-		CwmaxCsr.field.Cwmax2 = CW_MAX_IN_BITS;
-		CwmaxCsr.field.Cwmax3 = CW_MAX_IN_BITS;
-		RTMP_IO_WRITE32(pAd, WMM_CWMAX_CFG, CwmaxCsr.word);
-
-		RTMP_IO_WRITE32(pAd, WMM_AIFSN_CFG, 0x00002222);
-
-		NdisZeroMemory(&pAd->CommonCfg.APEdcaParm, sizeof(EDCA_PARM));
-	}
-	else
-	{
-		OPSTATUS_SET_FLAG(pAd, fOP_STATUS_WMM_INUSED);
-		//========================================================
-		//      MAC Register has a copy.
-		//========================================================
-		//
-		// Modify Cwmin/Cwmax/Txop on queue[QID_AC_VI], Recommend by Jerry 2005/07/27
-		// To degrade our VIDO Queue's throughput for WiFi WMM S3T07 Issue.
-		//
-		//pEdcaParm->Txop[QID_AC_VI] = pEdcaParm->Txop[QID_AC_VI] * 7 / 10; // rt2860c need this
-
-		Ac0Cfg.field.AcTxop =  pEdcaParm->Txop[QID_AC_BE];
-		Ac0Cfg.field.Cwmin= pEdcaParm->Cwmin[QID_AC_BE];
-		Ac0Cfg.field.Cwmax = pEdcaParm->Cwmax[QID_AC_BE];
-		Ac0Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_BE]; //+1;
-
-		Ac1Cfg.field.AcTxop =  pEdcaParm->Txop[QID_AC_BK];
-		Ac1Cfg.field.Cwmin = pEdcaParm->Cwmin[QID_AC_BK]; //+2;
-		Ac1Cfg.field.Cwmax = pEdcaParm->Cwmax[QID_AC_BK];
-		Ac1Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_BK]; //+1;
-
-		Ac2Cfg.field.AcTxop = (pEdcaParm->Txop[QID_AC_VI] * 6) / 10;
-		Ac2Cfg.field.Cwmin = pEdcaParm->Cwmin[QID_AC_VI];
-		Ac2Cfg.field.Cwmax = pEdcaParm->Cwmax[QID_AC_VI];
-		Ac2Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_VI];
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			// Tuning for Wi-Fi WMM S06
-			if (pAd->CommonCfg.bWiFiTest &&
-				pEdcaParm->Aifsn[QID_AC_VI] == 10)
-				Ac2Cfg.field.Aifsn -= 1;
-
-			// Tuning for TGn Wi-Fi 5.2.32
-			// STA TestBed changes in this item: conexant legacy sta ==> broadcom 11n sta
-			if (STA_TGN_WIFI_ON(pAd) &&
-				pEdcaParm->Aifsn[QID_AC_VI] == 10)
-			{
-				Ac0Cfg.field.Aifsn = 3;
-				Ac2Cfg.field.AcTxop = 5;
-			}
-		}
-#endif // CONFIG_STA_SUPPORT //
-
-		Ac3Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_VO];
-		Ac3Cfg.field.Cwmin = pEdcaParm->Cwmin[QID_AC_VO];
-		Ac3Cfg.field.Cwmax = pEdcaParm->Cwmax[QID_AC_VO];
-		Ac3Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_VO];
-
-//#ifdef WIFI_TEST
-		if (pAd->CommonCfg.bWiFiTest)
-		{
-			if (Ac3Cfg.field.AcTxop == 102)
-			{
-			Ac0Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_BE] ? pEdcaParm->Txop[QID_AC_BE] : 10;
-				Ac0Cfg.field.Aifsn  = pEdcaParm->Aifsn[QID_AC_BE]-1; /* AIFSN must >= 1 */
-			Ac1Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_BK];
-				Ac1Cfg.field.Aifsn  = pEdcaParm->Aifsn[QID_AC_BK];
-			Ac2Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_VI];
-			} /* End of if */
-		}
-//#endif // WIFI_TEST //
-
-		RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, Ac0Cfg.word);
-		RTMP_IO_WRITE32(pAd, EDCA_AC1_CFG, Ac1Cfg.word);
-		RTMP_IO_WRITE32(pAd, EDCA_AC2_CFG, Ac2Cfg.word);
-		RTMP_IO_WRITE32(pAd, EDCA_AC3_CFG, Ac3Cfg.word);
-
-
-		//========================================================
-		//      DMA Register has a copy too.
-		//========================================================
-		csr0.field.Ac0Txop = Ac0Cfg.field.AcTxop;
-		csr0.field.Ac1Txop = Ac1Cfg.field.AcTxop;
-		RTMP_IO_WRITE32(pAd, WMM_TXOP0_CFG, csr0.word);
-
-		csr1.field.Ac2Txop = Ac2Cfg.field.AcTxop;
-		csr1.field.Ac3Txop = Ac3Cfg.field.AcTxop;
-		RTMP_IO_WRITE32(pAd, WMM_TXOP1_CFG, csr1.word);
-
-		CwminCsr.word = 0;
-		CwminCsr.field.Cwmin0 = pEdcaParm->Cwmin[QID_AC_BE];
-		CwminCsr.field.Cwmin1 = pEdcaParm->Cwmin[QID_AC_BK];
-		CwminCsr.field.Cwmin2 = pEdcaParm->Cwmin[QID_AC_VI];
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			CwminCsr.field.Cwmin3 = pEdcaParm->Cwmin[QID_AC_VO] - 1; //for TGn wifi test
-#endif // CONFIG_STA_SUPPORT //
-		RTMP_IO_WRITE32(pAd, WMM_CWMIN_CFG, CwminCsr.word);
-
-		CwmaxCsr.word = 0;
-		CwmaxCsr.field.Cwmax0 = pEdcaParm->Cwmax[QID_AC_BE];
-		CwmaxCsr.field.Cwmax1 = pEdcaParm->Cwmax[QID_AC_BK];
-		CwmaxCsr.field.Cwmax2 = pEdcaParm->Cwmax[QID_AC_VI];
-		CwmaxCsr.field.Cwmax3 = pEdcaParm->Cwmax[QID_AC_VO];
-		RTMP_IO_WRITE32(pAd, WMM_CWMAX_CFG, CwmaxCsr.word);
-
-		AifsnCsr.word = 0;
-		AifsnCsr.field.Aifsn0 = Ac0Cfg.field.Aifsn; //pEdcaParm->Aifsn[QID_AC_BE];
-		AifsnCsr.field.Aifsn1 = Ac1Cfg.field.Aifsn; //pEdcaParm->Aifsn[QID_AC_BK];
-		AifsnCsr.field.Aifsn2 = Ac2Cfg.field.Aifsn; //pEdcaParm->Aifsn[QID_AC_VI];
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			// Tuning for Wi-Fi WMM S06
-			if (pAd->CommonCfg.bWiFiTest &&
-				pEdcaParm->Aifsn[QID_AC_VI] == 10)
-				AifsnCsr.field.Aifsn2 = Ac2Cfg.field.Aifsn - 4;
-
-			// Tuning for TGn Wi-Fi 5.2.32
-			// STA TestBed changes in this item: conexant legacy sta ==> broadcom 11n sta
-			if (STA_TGN_WIFI_ON(pAd) &&
-				pEdcaParm->Aifsn[QID_AC_VI] == 10)
-			{
-				AifsnCsr.field.Aifsn0 = 3;
-				AifsnCsr.field.Aifsn2 = 7;
-			}
-
-			if (INFRA_ON(pAd))
-				CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[BSSID_WCID], fCLIENT_STATUS_WMM_CAPABLE);
-		}
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			AifsnCsr.field.Aifsn3 = Ac3Cfg.field.Aifsn - 1; //pEdcaParm->Aifsn[QID_AC_VO]; //for TGn wifi test
-#endif // CONFIG_STA_SUPPORT //
-		RTMP_IO_WRITE32(pAd, WMM_AIFSN_CFG, AifsnCsr.word);
-
-		NdisMoveMemory(&pAd->CommonCfg.APEdcaParm, pEdcaParm, sizeof(EDCA_PARM));
-		if (!ADHOC_ON(pAd))
-		{
-			DBGPRINT(RT_DEBUG_TRACE,("EDCA [#%d]: AIFSN CWmin CWmax  TXOP(us)  ACM\n", pEdcaParm->EdcaUpdateCount));
-			DBGPRINT(RT_DEBUG_TRACE,("     AC_BE      %2d     %2d     %2d      %4d     %d\n",
-									 pEdcaParm->Aifsn[0],
-									 pEdcaParm->Cwmin[0],
-									 pEdcaParm->Cwmax[0],
-									 pEdcaParm->Txop[0]<<5,
-									 pEdcaParm->bACM[0]));
-			DBGPRINT(RT_DEBUG_TRACE,("     AC_BK      %2d     %2d     %2d      %4d     %d\n",
-									 pEdcaParm->Aifsn[1],
-									 pEdcaParm->Cwmin[1],
-									 pEdcaParm->Cwmax[1],
-									 pEdcaParm->Txop[1]<<5,
-									 pEdcaParm->bACM[1]));
-			DBGPRINT(RT_DEBUG_TRACE,("     AC_VI      %2d     %2d     %2d      %4d     %d\n",
-									 pEdcaParm->Aifsn[2],
-									 pEdcaParm->Cwmin[2],
-									 pEdcaParm->Cwmax[2],
-									 pEdcaParm->Txop[2]<<5,
-									 pEdcaParm->bACM[2]));
-			DBGPRINT(RT_DEBUG_TRACE,("     AC_VO      %2d     %2d     %2d      %4d     %d\n",
-									 pEdcaParm->Aifsn[3],
-									 pEdcaParm->Cwmin[3],
-									 pEdcaParm->Cwmax[3],
-									 pEdcaParm->Txop[3]<<5,
-									 pEdcaParm->bACM[3]));
-		}
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID 	AsicSetSlotTime(
-	IN PRTMP_ADAPTER pAd,
-	IN BOOLEAN bUseShortSlotTime)
-{
-	ULONG	SlotTime;
-	UINT32	RegValue = 0;
-
-#ifdef CONFIG_STA_SUPPORT
-	if (pAd->CommonCfg.Channel > 14)
-		bUseShortSlotTime = TRUE;
-#endif // CONFIG_STA_SUPPORT //
-
-	if (bUseShortSlotTime)
-		OPSTATUS_SET_FLAG(pAd, fOP_STATUS_SHORT_SLOT_INUSED);
-	else
-		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_SLOT_INUSED);
-
-	SlotTime = (bUseShortSlotTime)? 9 : 20;
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// force using short SLOT time for FAE to demo performance when TxBurst is ON
-		if (((pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED)))
-#ifdef DOT11_N_SUPPORT
-			|| ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE) && (pAd->CommonCfg.BACapability.field.Policy == BA_NOTUSE))
-#endif // DOT11_N_SUPPORT //
-			)
-		{
-			// In this case, we will think it is doing Wi-Fi test
-			// And we will not set to short slot when bEnableTxBurst is TRUE.
-		}
-		else if (pAd->CommonCfg.bEnableTxBurst)
-			SlotTime = 9;
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	//
-	// For some reasons, always set it to short slot time.
-	//
-	// ToDo: Should consider capability with 11B
-	//
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if (pAd->StaCfg.BssType == BSS_ADHOC)
-			SlotTime = 20;
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	RTMP_IO_READ32(pAd, BKOFF_SLOT_CFG, &RegValue);
-	RegValue = RegValue & 0xFFFFFF00;
-
-	RegValue |= SlotTime;
-
-	RTMP_IO_WRITE32(pAd, BKOFF_SLOT_CFG, RegValue);
-}
-
-/*
-	========================================================================
-	Description:
-		Add Shared key information into ASIC.
-		Update shared key, TxMic and RxMic to Asic Shared key table
-		Update its cipherAlg to Asic Shared key Mode.
-
-    Return:
-	========================================================================
-*/
-VOID AsicAddSharedKeyEntry(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR		 BssIndex,
-	IN UCHAR		 KeyIdx,
-	IN UCHAR		 CipherAlg,
-	IN PUCHAR		 pKey,
-	IN PUCHAR		 pTxMic,
-	IN PUCHAR		 pRxMic)
-{
-	ULONG offset; //, csr0;
-	SHAREDKEY_MODE_STRUC csr1;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("AsicAddSharedKeyEntry BssIndex=%d, KeyIdx=%d\n", BssIndex,KeyIdx));
-//============================================================================================
-
-	DBGPRINT(RT_DEBUG_TRACE,("AsicAddSharedKeyEntry: %s key #%d\n", CipherName[CipherAlg], BssIndex*4 + KeyIdx));
-	DBGPRINT_RAW(RT_DEBUG_TRACE, (" 	Key = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
-		pKey[0],pKey[1],pKey[2],pKey[3],pKey[4],pKey[5],pKey[6],pKey[7],pKey[8],pKey[9],pKey[10],pKey[11],pKey[12],pKey[13],pKey[14],pKey[15]));
-	if (pRxMic)
-	{
-		DBGPRINT_RAW(RT_DEBUG_TRACE, (" 	Rx MIC Key = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
-			pRxMic[0],pRxMic[1],pRxMic[2],pRxMic[3],pRxMic[4],pRxMic[5],pRxMic[6],pRxMic[7]));
-	}
-	if (pTxMic)
-	{
-		DBGPRINT_RAW(RT_DEBUG_TRACE, (" 	Tx MIC Key = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
-			pTxMic[0],pTxMic[1],pTxMic[2],pTxMic[3],pTxMic[4],pTxMic[5],pTxMic[6],pTxMic[7]));
-	}
-//============================================================================================
-	//
-	// fill key material - key + TX MIC + RX MIC
-	//
-
-#ifdef RT2870
-{
-	offset = SHARED_KEY_TABLE_BASE + (4*BssIndex + KeyIdx)*HW_KEY_ENTRY_SIZE;
-	RTUSBMultiWrite(pAd, offset, pKey, MAX_LEN_OF_SHARE_KEY);
-
-	offset += MAX_LEN_OF_SHARE_KEY;
-	if (pTxMic)
-	{
-		RTUSBMultiWrite(pAd, offset, pTxMic, 8);
-	}
-
-	offset += 8;
-	if (pRxMic)
-	{
-		RTUSBMultiWrite(pAd, offset, pRxMic, 8);
-	}
-}
-#endif // RT2870 //
-
-	//
-	// Update cipher algorithm. WSTA always use BSS0
-	//
-	RTMP_IO_READ32(pAd, SHARED_KEY_MODE_BASE+4*(BssIndex/2), &csr1.word);
-	DBGPRINT(RT_DEBUG_TRACE,("Read: SHARED_KEY_MODE_BASE at this Bss[%d] KeyIdx[%d]= 0x%x \n", BssIndex,KeyIdx, csr1.word));
-	if ((BssIndex%2) == 0)
-	{
-		if (KeyIdx == 0)
-			csr1.field.Bss0Key0CipherAlg = CipherAlg;
-		else if (KeyIdx == 1)
-			csr1.field.Bss0Key1CipherAlg = CipherAlg;
-		else if (KeyIdx == 2)
-			csr1.field.Bss0Key2CipherAlg = CipherAlg;
-		else
-			csr1.field.Bss0Key3CipherAlg = CipherAlg;
-	}
-	else
-	{
-		if (KeyIdx == 0)
-			csr1.field.Bss1Key0CipherAlg = CipherAlg;
-		else if (KeyIdx == 1)
-			csr1.field.Bss1Key1CipherAlg = CipherAlg;
-		else if (KeyIdx == 2)
-			csr1.field.Bss1Key2CipherAlg = CipherAlg;
-		else
-			csr1.field.Bss1Key3CipherAlg = CipherAlg;
-	}
-	DBGPRINT(RT_DEBUG_TRACE,("Write: SHARED_KEY_MODE_BASE at this Bss[%d] = 0x%x \n", BssIndex, csr1.word));
-	RTMP_IO_WRITE32(pAd, SHARED_KEY_MODE_BASE+4*(BssIndex/2), csr1.word);
-
-}
-
-//	IRQL = DISPATCH_LEVEL
-VOID AsicRemoveSharedKeyEntry(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR		 BssIndex,
-	IN UCHAR		 KeyIdx)
-{
-	//ULONG SecCsr0;
-	SHAREDKEY_MODE_STRUC csr1;
-
-	DBGPRINT(RT_DEBUG_TRACE,("AsicRemoveSharedKeyEntry: #%d \n", BssIndex*4 + KeyIdx));
-
-	RTMP_IO_READ32(pAd, SHARED_KEY_MODE_BASE+4*(BssIndex/2), &csr1.word);
-	if ((BssIndex%2) == 0)
-	{
-		if (KeyIdx == 0)
-			csr1.field.Bss0Key0CipherAlg = 0;
-		else if (KeyIdx == 1)
-			csr1.field.Bss0Key1CipherAlg = 0;
-		else if (KeyIdx == 2)
-			csr1.field.Bss0Key2CipherAlg = 0;
-		else
-			csr1.field.Bss0Key3CipherAlg = 0;
-	}
-	else
-	{
-		if (KeyIdx == 0)
-			csr1.field.Bss1Key0CipherAlg = 0;
-		else if (KeyIdx == 1)
-			csr1.field.Bss1Key1CipherAlg = 0;
-		else if (KeyIdx == 2)
-			csr1.field.Bss1Key2CipherAlg = 0;
-		else
-			csr1.field.Bss1Key3CipherAlg = 0;
-	}
-	DBGPRINT(RT_DEBUG_TRACE,("Write: SHARED_KEY_MODE_BASE at this Bss[%d] = 0x%x \n", BssIndex, csr1.word));
-	RTMP_IO_WRITE32(pAd, SHARED_KEY_MODE_BASE+4*(BssIndex/2), csr1.word);
-	ASSERT(BssIndex < 4);
-	ASSERT(KeyIdx < 4);
-
-}
-
-
-VOID AsicUpdateWCIDAttribute(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT		WCID,
-	IN UCHAR		BssIndex,
-	IN UCHAR        CipherAlg,
-	IN BOOLEAN		bUsePairewiseKeyTable)
-{
-	ULONG   WCIDAttri = 0, offset;
-
-	//
-	// Update WCID attribute.
-	// Only TxKey could update WCID attribute.
-	//
-	offset = MAC_WCID_ATTRIBUTE_BASE + (WCID * HW_WCID_ATTRI_SIZE);
-	WCIDAttri = (BssIndex << 4) | (CipherAlg << 1) | (bUsePairewiseKeyTable);
-	RTMP_IO_WRITE32(pAd, offset, WCIDAttri);
-}
-
-VOID AsicUpdateWCIDIVEIV(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT		WCID,
-	IN ULONG        uIV,
-	IN ULONG        uEIV)
-{
-	ULONG	offset;
-
-	offset = MAC_IVEIV_TABLE_BASE + (WCID * HW_IVEIV_ENTRY_SIZE);
-
-	RTMP_IO_WRITE32(pAd, offset, uIV);
-	RTMP_IO_WRITE32(pAd, offset + 4, uEIV);
-}
-
-VOID AsicUpdateRxWCIDTable(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT		WCID,
-	IN PUCHAR        pAddr)
-{
-	ULONG offset;
-	ULONG Addr;
-
-	offset = MAC_WCID_BASE + (WCID * HW_WCID_ENTRY_SIZE);
-	Addr = pAddr[0] + (pAddr[1] << 8) +(pAddr[2] << 16) +(pAddr[3] << 24);
-	RTMP_IO_WRITE32(pAd, offset, Addr);
-	Addr = pAddr[4] + (pAddr[5] << 8);
-	RTMP_IO_WRITE32(pAd, offset + 4, Addr);
-}
-
-
-/*
-    ========================================================================
-
-    Routine Description:
-        Set Cipher Key, Cipher algorithm, IV/EIV to Asic
-
-    Arguments:
-        pAd                     Pointer to our adapter
-        WCID                    WCID Entry number.
-        BssIndex                BSSID index, station or none multiple BSSID support
-                                this value should be 0.
-        KeyIdx                  This KeyIdx will set to IV's KeyID if bTxKey enabled
-        pCipherKey              Pointer to Cipher Key.
-        bUsePairewiseKeyTable   TRUE means saved the key in SharedKey table,
-                                otherwise PairewiseKey table
-        bTxKey                  This is the transmit key if enabled.
-
-    Return Value:
-        None
-
-    Note:
-        This routine will set the relative key stuff to Asic including WCID attribute,
-        Cipher Key, Cipher algorithm and IV/EIV.
-
-        IV/EIV will be update if this CipherKey is the transmission key because
-        ASIC will base on IV's KeyID value to select Cipher Key.
-
-        If bTxKey sets to FALSE, this is not the TX key, but it could be
-        RX key
-
-    	For AP mode bTxKey must be always set to TRUE.
-    ========================================================================
-*/
-VOID AsicAddKeyEntry(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT		WCID,
-	IN UCHAR		BssIndex,
-	IN UCHAR		KeyIdx,
-	IN PCIPHER_KEY	pCipherKey,
-	IN BOOLEAN		bUsePairewiseKeyTable,
-	IN BOOLEAN		bTxKey)
-{
-	ULONG	offset;
-//	ULONG   WCIDAttri = 0;
-	UCHAR	IV4 = 0;
-	PUCHAR		pKey = pCipherKey->Key;
-//	ULONG		KeyLen = pCipherKey->KeyLen;
-	PUCHAR		pTxMic = pCipherKey->TxMic;
-	PUCHAR		pRxMic = pCipherKey->RxMic;
-	PUCHAR		pTxtsc = pCipherKey->TxTsc;
-	UCHAR		CipherAlg = pCipherKey->CipherAlg;
-	SHAREDKEY_MODE_STRUC csr1;
-
-//	ASSERT(KeyLen <= MAX_LEN_OF_PEER_KEY);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("==> AsicAddKeyEntry\n"));
-	//
-	// 1.) decide key table offset
-	//
-	if (bUsePairewiseKeyTable)
-		offset = PAIRWISE_KEY_TABLE_BASE + (WCID * HW_KEY_ENTRY_SIZE);
-	else
-		offset = SHARED_KEY_TABLE_BASE + (4 * BssIndex + KeyIdx) * HW_KEY_ENTRY_SIZE;
-
-	//
-	// 2.) Set Key to Asic
-	//
-	//for (i = 0; i < KeyLen; i++)
-
-#ifdef RT2870
-	RTUSBMultiWrite(pAd, offset, pKey, MAX_LEN_OF_PEER_KEY);
-	offset += MAX_LEN_OF_PEER_KEY;
-
-	//
-	// 3.) Set MIC key if available
-	//
-	if (pTxMic)
-	{
-		RTUSBMultiWrite(pAd, offset, pTxMic, 8);
-	}
-	offset += LEN_TKIP_TXMICK;
-
-	if (pRxMic)
-	{
-		RTUSBMultiWrite(pAd, offset, pRxMic, 8);
-	}
-#endif // RT2870 //
-
-	//
-	// 4.) Modify IV/EIV if needs
-	//     This will force Asic to use this key ID by setting IV.
-	//
-	if (bTxKey)
-	{
-
-#ifdef RT2870
-		UINT32 tmpVal;
-
-		//
-		// Write IV
-		//
-		IV4 = (KeyIdx << 6);
-		if ((CipherAlg == CIPHER_TKIP) || (CipherAlg == CIPHER_TKIP_NO_MIC) ||(CipherAlg == CIPHER_AES))
-			IV4 |= 0x20;  // turn on extension bit means EIV existence
-
-		tmpVal = pTxtsc[1] + (((pTxtsc[1] | 0x20) & 0x7f) << 8) + (pTxtsc[0] << 16) + (IV4 << 24);
-		RTMP_IO_WRITE32(pAd, offset, tmpVal);
-
-		//
-		// Write EIV
-		//
-		offset += 4;
-		RTMP_IO_WRITE32(pAd, offset, *(PUINT32)&pCipherKey->TxTsc[2]);
-#endif // RT2870 //
-		AsicUpdateWCIDAttribute(pAd, WCID, BssIndex, CipherAlg, bUsePairewiseKeyTable);
-	}
-
-	if (!bUsePairewiseKeyTable)
-	{
-		//
-		// Only update the shared key security mode
-		//
-		RTMP_IO_READ32(pAd, SHARED_KEY_MODE_BASE + 4 * (BssIndex / 2), &csr1.word);
-		if ((BssIndex % 2) == 0)
-		{
-			if (KeyIdx == 0)
-				csr1.field.Bss0Key0CipherAlg = CipherAlg;
-			else if (KeyIdx == 1)
-				csr1.field.Bss0Key1CipherAlg = CipherAlg;
-			else if (KeyIdx == 2)
-				csr1.field.Bss0Key2CipherAlg = CipherAlg;
-			else
-				csr1.field.Bss0Key3CipherAlg = CipherAlg;
-		}
-		else
-		{
-			if (KeyIdx == 0)
-				csr1.field.Bss1Key0CipherAlg = CipherAlg;
-			else if (KeyIdx == 1)
-				csr1.field.Bss1Key1CipherAlg = CipherAlg;
-			else if (KeyIdx == 2)
-				csr1.field.Bss1Key2CipherAlg = CipherAlg;
-			else
-				csr1.field.Bss1Key3CipherAlg = CipherAlg;
-		}
-		RTMP_IO_WRITE32(pAd, SHARED_KEY_MODE_BASE + 4 * (BssIndex / 2), csr1.word);
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<== AsicAddKeyEntry\n"));
-}
-
-
-/*
-	========================================================================
-	Description:
-		Add Pair-wise key material into ASIC.
-		Update pairwise key, TxMic and RxMic to Asic Pair-wise key table
-
-    Return:
-	========================================================================
-*/
-VOID AsicAddPairwiseKeyEntry(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR        pAddr,
-	IN UCHAR		WCID,
-	IN CIPHER_KEY		 *pCipherKey)
-{
-	INT i;
-	ULONG 		offset;
-	PUCHAR		 pKey = pCipherKey->Key;
-	PUCHAR		 pTxMic = pCipherKey->TxMic;
-	PUCHAR		 pRxMic = pCipherKey->RxMic;
-#ifdef DBG
-	UCHAR		CipherAlg = pCipherKey->CipherAlg;
-#endif // DBG //
-
-	// EKEY
-	offset = PAIRWISE_KEY_TABLE_BASE + (WCID * HW_KEY_ENTRY_SIZE);
-#ifdef RT2870
-	RTUSBMultiWrite(pAd, offset, &pCipherKey->Key[0], MAX_LEN_OF_PEER_KEY);
-#endif // RT2870 //
-	for (i=0; i<MAX_LEN_OF_PEER_KEY; i+=4)
-	{
-		UINT32 Value;
-		RTMP_IO_READ32(pAd, offset + i, &Value);
-	}
-
-	offset += MAX_LEN_OF_PEER_KEY;
-
-	//  MIC KEY
-	if (pTxMic)
-	{
-#ifdef RT2870
-		RTUSBMultiWrite(pAd, offset, &pCipherKey->TxMic[0], 8);
-#endif // RT2870 //
-	}
-	offset += 8;
-	if (pRxMic)
-	{
-#ifdef RT2870
-		RTUSBMultiWrite(pAd, offset, &pCipherKey->RxMic[0], 8);
-#endif // RT2870 //
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE,("AsicAddPairwiseKeyEntry: WCID #%d Alg=%s\n",WCID, CipherName[CipherAlg]));
-	DBGPRINT(RT_DEBUG_TRACE,("	Key = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
-		pKey[0],pKey[1],pKey[2],pKey[3],pKey[4],pKey[5],pKey[6],pKey[7],pKey[8],pKey[9],pKey[10],pKey[11],pKey[12],pKey[13],pKey[14],pKey[15]));
-	if (pRxMic)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("	Rx MIC Key = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
-			pRxMic[0],pRxMic[1],pRxMic[2],pRxMic[3],pRxMic[4],pRxMic[5],pRxMic[6],pRxMic[7]));
-	}
-	if (pTxMic)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("	Tx MIC Key = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
-			pTxMic[0],pTxMic[1],pTxMic[2],pTxMic[3],pTxMic[4],pTxMic[5],pTxMic[6],pTxMic[7]));
-	}
-}
-/*
-	========================================================================
-	Description:
-		Remove Pair-wise key material from ASIC.
-
-    Return:
-	========================================================================
-*/
-VOID AsicRemovePairwiseKeyEntry(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR		 BssIdx,
-	IN UCHAR		 Wcid)
-{
-	ULONG		WCIDAttri;
-	USHORT		offset;
-
-	// re-set the entry's WCID attribute as OPEN-NONE.
-	offset = MAC_WCID_ATTRIBUTE_BASE + (Wcid * HW_WCID_ATTRI_SIZE);
-	WCIDAttri = (BssIdx<<4) | PAIRWISEKEYTABLE;
-	RTMP_IO_WRITE32(pAd, offset, WCIDAttri);
-}
-
-BOOLEAN AsicSendCommandToMcu(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR		 Command,
-	IN UCHAR		 Token,
-	IN UCHAR		 Arg0,
-	IN UCHAR		 Arg1)
-{
-	HOST_CMD_CSR_STRUC	H2MCmd;
-	H2M_MAILBOX_STRUC	H2MMailbox;
-	ULONG				i = 0;
-	do
-	{
-		RTMP_IO_READ32(pAd, H2M_MAILBOX_CSR, &H2MMailbox.word);
-		if (H2MMailbox.field.Owner == 0)
-			break;
-
-		RTMPusecDelay(2);
-	} while(i++ < 100);
-
-	if (i >= 100)
-	{
-		{
-		DBGPRINT_ERR(("H2M_MAILBOX still hold by MCU. command fail\n"));
-		}
-		return FALSE;
-	}
-
-
-	H2MMailbox.field.Owner	  = 1;	   // pass ownership to MCU
-	H2MMailbox.field.CmdToken = Token;
-	H2MMailbox.field.HighByte = Arg1;
-	H2MMailbox.field.LowByte  = Arg0;
-	RTMP_IO_WRITE32(pAd, H2M_MAILBOX_CSR, H2MMailbox.word);
-
-	H2MCmd.word 			  = 0;
-	H2MCmd.field.HostCommand  = Command;
-	RTMP_IO_WRITE32(pAd, HOST_CMD_CSR, H2MCmd.word);
-
-	if (Command != 0x80)
-	{
-	}
-
-	return TRUE;
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Verify the support rate for different PHY type
-
-	Arguments:
-		pAd 				Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-
-	========================================================================
-*/
-VOID	RTMPCheckRates(
-	IN		PRTMP_ADAPTER	pAd,
-	IN OUT	UCHAR			SupRate[],
-	IN OUT	UCHAR			*SupRateLen)
-{
-	UCHAR	RateIdx, i, j;
-	UCHAR	NewRate[12], NewRateLen;
-
-	NewRateLen = 0;
-
-	if (pAd->CommonCfg.PhyMode == PHY_11B)
-		RateIdx = 4;
-	else
-		RateIdx = 12;
-
-	// Check for support rates exclude basic rate bit
-	for (i = 0; i < *SupRateLen; i++)
-		for (j = 0; j < RateIdx; j++)
-			if ((SupRate[i] & 0x7f) == RateIdTo500Kbps[j])
-				NewRate[NewRateLen++] = SupRate[i];
-
-	*SupRateLen = NewRateLen;
-	NdisMoveMemory(SupRate, NewRate, NewRateLen);
-}
-
-#ifdef CONFIG_STA_SUPPORT
-#ifdef DOT11_N_SUPPORT
-BOOLEAN RTMPCheckChannel(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR		CentralChannel,
-	IN UCHAR		Channel)
-{
-	UCHAR		k;
-	UCHAR		UpperChannel = 0, LowerChannel = 0;
-	UCHAR		NoEffectChannelinList = 0;
-
-	// Find upper and lower channel according to 40MHz current operation.
-	if (CentralChannel < Channel)
-	{
-		UpperChannel = Channel;
-		if (CentralChannel > 2)
-			LowerChannel = CentralChannel - 2;
-		else
-			return FALSE;
-	}
-	else if (CentralChannel > Channel)
-	{
-		UpperChannel = CentralChannel + 2;
-		LowerChannel = Channel;
-	}
-
-	for (k = 0;k < pAd->ChannelListNum;k++)
-	{
-		if (pAd->ChannelList[k].Channel == UpperChannel)
-		{
-			NoEffectChannelinList ++;
-		}
-		if (pAd->ChannelList[k].Channel == LowerChannel)
-		{
-			NoEffectChannelinList ++;
-		}
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE,("Total Channel in Channel List = [%d]\n", NoEffectChannelinList));
-	if (NoEffectChannelinList == 2)
-		return TRUE;
-	else
-		return FALSE;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Verify the support rate for HT phy type
-
-	Arguments:
-		pAd 				Pointer to our adapter
-
-	Return Value:
-		FALSE if pAd->CommonCfg.SupportedHtPhy doesn't accept the pHtCapability.  (AP Mode)
-
-	IRQL = PASSIVE_LEVEL
-
-	========================================================================
-*/
-BOOLEAN 	RTMPCheckHt(
-	IN	PRTMP_ADAPTER			pAd,
-	IN	UCHAR					Wcid,
-	IN 	HT_CAPABILITY_IE		*pHtCapability,
-	IN 	ADD_HT_INFO_IE			*pAddHtInfo)
-{
-	if (Wcid >= MAX_LEN_OF_MAC_TABLE)
-		return FALSE;
-
-	// If use AMSDU, set flag.
-	if (pAd->CommonCfg.DesiredHtPhy.AmsduEnable)
-		CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[Wcid], fCLIENT_STATUS_AMSDU_INUSED);
-	// Save Peer Capability
-	if (pHtCapability->HtCapInfo.ShortGIfor20)
-		CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[Wcid], fCLIENT_STATUS_SGI20_CAPABLE);
-	if (pHtCapability->HtCapInfo.ShortGIfor40)
-		CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[Wcid], fCLIENT_STATUS_SGI40_CAPABLE);
-	if (pHtCapability->HtCapInfo.TxSTBC)
-		CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[Wcid], fCLIENT_STATUS_TxSTBC_CAPABLE);
-	if (pHtCapability->HtCapInfo.RxSTBC)
-		CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[Wcid], fCLIENT_STATUS_RxSTBC_CAPABLE);
-	if (pAd->CommonCfg.bRdg && pHtCapability->ExtHtCapInfo.RDGSupport)
-	{
-		CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[Wcid], fCLIENT_STATUS_RDG_CAPABLE);
-	}
-
-	if (Wcid < MAX_LEN_OF_MAC_TABLE)
-	{
-		pAd->MacTab.Content[Wcid].MpduDensity = pHtCapability->HtCapParm.MpduDensity;
-	}
-
-	// Will check ChannelWidth for MCSSet[4] below
-	pAd->MlmeAux.HtCapability.MCSSet[4] = 0x1;
-    switch (pAd->CommonCfg.RxStream)
-	{
-		case 1:
-			pAd->MlmeAux.HtCapability.MCSSet[0] = 0xff;
-			pAd->MlmeAux.HtCapability.MCSSet[1] = 0x00;
-            pAd->MlmeAux.HtCapability.MCSSet[2] = 0x00;
-            pAd->MlmeAux.HtCapability.MCSSet[3] = 0x00;
-			break;
-		case 2:
-			pAd->MlmeAux.HtCapability.MCSSet[0] = 0xff;
-			pAd->MlmeAux.HtCapability.MCSSet[1] = 0xff;
-            pAd->MlmeAux.HtCapability.MCSSet[2] = 0x00;
-            pAd->MlmeAux.HtCapability.MCSSet[3] = 0x00;
-			break;
-		case 3:
-			pAd->MlmeAux.HtCapability.MCSSet[0] = 0xff;
-			pAd->MlmeAux.HtCapability.MCSSet[1] = 0xff;
-            pAd->MlmeAux.HtCapability.MCSSet[2] = 0xff;
-            pAd->MlmeAux.HtCapability.MCSSet[3] = 0x00;
-			break;
-	}
-
-	pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth = pAddHtInfo->AddHtInfo.RecomWidth & pAd->CommonCfg.DesiredHtPhy.ChannelWidth;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("RTMPCheckHt:: HtCapInfo.ChannelWidth=%d, RecomWidth=%d, DesiredHtPhy.ChannelWidth=%d, BW40MAvailForA/G=%d/%d, PhyMode=%d \n",
-		pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth, pAddHtInfo->AddHtInfo.RecomWidth, pAd->CommonCfg.DesiredHtPhy.ChannelWidth,
-		pAd->NicConfig2.field.BW40MAvailForA, pAd->NicConfig2.field.BW40MAvailForG, pAd->CommonCfg.PhyMode));
-
-	pAd->MlmeAux.HtCapability.HtCapInfo.GF =  pHtCapability->HtCapInfo.GF &pAd->CommonCfg.DesiredHtPhy.GF;
-
-	// Send Assoc Req with my HT capability.
-	pAd->MlmeAux.HtCapability.HtCapInfo.AMsduSize =  pAd->CommonCfg.DesiredHtPhy.AmsduSize;
-	pAd->MlmeAux.HtCapability.HtCapInfo.MimoPs =  pAd->CommonCfg.DesiredHtPhy.MimoPs;
-	pAd->MlmeAux.HtCapability.HtCapInfo.ShortGIfor20 =  (pAd->CommonCfg.DesiredHtPhy.ShortGIfor20) & (pHtCapability->HtCapInfo.ShortGIfor20);
-	pAd->MlmeAux.HtCapability.HtCapInfo.ShortGIfor40 =  (pAd->CommonCfg.DesiredHtPhy.ShortGIfor40) & (pHtCapability->HtCapInfo.ShortGIfor40);
-	pAd->MlmeAux.HtCapability.HtCapInfo.TxSTBC =  (pAd->CommonCfg.DesiredHtPhy.TxSTBC)&(pHtCapability->HtCapInfo.RxSTBC);
-	pAd->MlmeAux.HtCapability.HtCapInfo.RxSTBC =  (pAd->CommonCfg.DesiredHtPhy.RxSTBC)&(pHtCapability->HtCapInfo.TxSTBC);
-	pAd->MlmeAux.HtCapability.HtCapParm.MaxRAmpduFactor = pAd->CommonCfg.DesiredHtPhy.MaxRAmpduFactor;
-    pAd->MlmeAux.HtCapability.HtCapParm.MpduDensity = pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity;
-	pAd->MlmeAux.HtCapability.ExtHtCapInfo.PlusHTC = pHtCapability->ExtHtCapInfo.PlusHTC;
-	pAd->MacTab.Content[Wcid].HTCapability.ExtHtCapInfo.PlusHTC = pHtCapability->ExtHtCapInfo.PlusHTC;
-	if (pAd->CommonCfg.bRdg)
-	{
-		pAd->MlmeAux.HtCapability.ExtHtCapInfo.RDGSupport = pHtCapability->ExtHtCapInfo.RDGSupport;
-        pAd->MlmeAux.HtCapability.ExtHtCapInfo.PlusHTC = 1;
-	}
-
-    if (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_20)
-        pAd->MlmeAux.HtCapability.MCSSet[4] = 0x0;  // BW20 can't transmit MCS32
-
-	COPY_AP_HTSETTINGS_FROM_BEACON(pAd, pHtCapability);
-	return TRUE;
-}
-#endif // DOT11_N_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
-/*
-	========================================================================
-
-	Routine Description:
-		Verify the support rate for different PHY type
-
-	Arguments:
-		pAd 				Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-
-	========================================================================
-*/
-VOID RTMPUpdateMlmeRate(
-	IN PRTMP_ADAPTER	pAd)
-{
-	UCHAR	MinimumRate;
-	UCHAR	ProperMlmeRate; //= RATE_54;
-	UCHAR	i, j, RateIdx = 12; //1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
-	BOOLEAN	bMatch = FALSE;
-
-	switch (pAd->CommonCfg.PhyMode)
-	{
-		case PHY_11B:
-			ProperMlmeRate = RATE_11;
-			MinimumRate = RATE_1;
-			break;
-		case PHY_11BG_MIXED:
-#ifdef DOT11_N_SUPPORT
-		case PHY_11ABGN_MIXED:
-		case PHY_11BGN_MIXED:
-#endif // DOT11_N_SUPPORT //
-			if ((pAd->MlmeAux.SupRateLen == 4) &&
-				(pAd->MlmeAux.ExtRateLen == 0))
-				// B only AP
-				ProperMlmeRate = RATE_11;
-			else
-				ProperMlmeRate = RATE_24;
-
-			if (pAd->MlmeAux.Channel <= 14)
-				MinimumRate = RATE_1;
-			else
-				MinimumRate = RATE_6;
-			break;
-		case PHY_11A:
-#ifdef DOT11_N_SUPPORT
-		case PHY_11N_2_4G:	// rt2860 need to check mlmerate for 802.11n
-		case PHY_11GN_MIXED:
-		case PHY_11AGN_MIXED:
-		case PHY_11AN_MIXED:
-		case PHY_11N_5G:
-#endif // DOT11_N_SUPPORT //
-			ProperMlmeRate = RATE_24;
-			MinimumRate = RATE_6;
-			break;
-		case PHY_11ABG_MIXED:
-			ProperMlmeRate = RATE_24;
-			if (pAd->MlmeAux.Channel <= 14)
-			   MinimumRate = RATE_1;
-			else
-				MinimumRate = RATE_6;
-			break;
-		default: // error
-			ProperMlmeRate = RATE_1;
-			MinimumRate = RATE_1;
-			break;
-	}
-
-	for (i = 0; i < pAd->MlmeAux.SupRateLen; i++)
-	{
-		for (j = 0; j < RateIdx; j++)
-		{
-			if ((pAd->MlmeAux.SupRate[i] & 0x7f) == RateIdTo500Kbps[j])
-			{
-				if (j == ProperMlmeRate)
-				{
-					bMatch = TRUE;
-					break;
-				}
-			}
-		}
-
-		if (bMatch)
-			break;
-	}
-
-	if (bMatch == FALSE)
-	{
-		for (i = 0; i < pAd->MlmeAux.ExtRateLen; i++)
-		{
-			for (j = 0; j < RateIdx; j++)
-			{
-				if ((pAd->MlmeAux.ExtRate[i] & 0x7f) == RateIdTo500Kbps[j])
-				{
-					if (j == ProperMlmeRate)
-					{
-						bMatch = TRUE;
-						break;
-					}
-				}
-			}
-
-			if (bMatch)
-				break;
-		}
-	}
-
-	if (bMatch == FALSE)
-	{
-		ProperMlmeRate = MinimumRate;
-	}
-
-	pAd->CommonCfg.MlmeRate = MinimumRate;
-	pAd->CommonCfg.RtsRate = ProperMlmeRate;
-	if (pAd->CommonCfg.MlmeRate >= RATE_6)
-	{
-		pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM;
-		pAd->CommonCfg.MlmeTransmit.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate];
-		pAd->MacTab.Content[BSS0Mcast_WCID].HTPhyMode.field.MODE = MODE_OFDM;
-		pAd->MacTab.Content[BSS0Mcast_WCID].HTPhyMode.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate];
-	}
-	else
-	{
-		pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK;
-		pAd->CommonCfg.MlmeTransmit.field.MCS = pAd->CommonCfg.MlmeRate;
-		pAd->MacTab.Content[BSS0Mcast_WCID].HTPhyMode.field.MODE = MODE_CCK;
-		pAd->MacTab.Content[BSS0Mcast_WCID].HTPhyMode.field.MCS = pAd->CommonCfg.MlmeRate;
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("RTMPUpdateMlmeRate ==>   MlmeTransmit = 0x%x  \n" , pAd->CommonCfg.MlmeTransmit.word));
-}
-
-CHAR RTMPMaxRssi(
-	IN PRTMP_ADAPTER	pAd,
-	IN CHAR				Rssi0,
-	IN CHAR				Rssi1,
-	IN CHAR				Rssi2)
-{
-	CHAR	larger = -127;
-
-	if ((pAd->Antenna.field.RxPath == 1) && (Rssi0 != 0))
-	{
-		larger = Rssi0;
-	}
-
-	if ((pAd->Antenna.field.RxPath >= 2) && (Rssi1 != 0))
-	{
-		larger = max(Rssi0, Rssi1);
-	}
-
-	if ((pAd->Antenna.field.RxPath == 3) && (Rssi2 != 0))
-	{
-		larger = max(larger, Rssi2);
-	}
-
-	if (larger == -127)
-		larger = 0;
-
-	return larger;
-}
-
-/*
-    ========================================================================
-    Routine Description:
-        Periodic evaluate antenna link status
-
-    Arguments:
-        pAd         - Adapter pointer
-
-    Return Value:
-        None
-
-    ========================================================================
-*/
-VOID AsicEvaluateRxAnt(
-	IN PRTMP_ADAPTER	pAd)
-{
-	UCHAR	BBPR3 = 0;
-
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS	|
-								fRTMP_ADAPTER_HALT_IN_PROGRESS	|
-								fRTMP_ADAPTER_RADIO_OFF			|
-								fRTMP_ADAPTER_NIC_NOT_EXIST		|
-								fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-			return;
-
-		if (pAd->StaCfg.Psm == PWR_SAVE)
-			return;
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3);
-	BBPR3 &= (~0x18);
-	if(pAd->Antenna.field.RxPath == 3)
-	{
-		BBPR3 |= (0x10);
-	}
-	else if(pAd->Antenna.field.RxPath == 2)
-	{
-		BBPR3 |= (0x8);
-	}
-	else if(pAd->Antenna.field.RxPath == 1)
-	{
-		BBPR3 |= (0x0);
-	}
-	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
-		)
-	{
-		ULONG	TxTotalCnt = pAd->RalinkCounters.OneSecTxNoRetryOkCount +
-								pAd->RalinkCounters.OneSecTxRetryOkCount +
-								pAd->RalinkCounters.OneSecTxFailCount;
-
-		if (TxTotalCnt > 50)
-		{
-			RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 20);
-			pAd->Mlme.bLowThroughput = FALSE;
-		}
-		else
-		{
-			RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 300);
-			pAd->Mlme.bLowThroughput = TRUE;
-		}
-	}
-}
-
-/*
-    ========================================================================
-    Routine Description:
-        After evaluation, check antenna link status
-
-    Arguments:
-        pAd         - Adapter pointer
-
-    Return Value:
-        None
-
-    ========================================================================
-*/
-VOID AsicRxAntEvalTimeout(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3)
-{
-	RTMP_ADAPTER	*pAd = (RTMP_ADAPTER *)FunctionContext;
-#ifdef CONFIG_STA_SUPPORT
-	UCHAR			BBPR3 = 0;
-	CHAR			larger = -127, rssi0, rssi1, rssi2;
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)	||
-			RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)		||
-			RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF)			||
-			RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
-			return;
-
-		if (pAd->StaCfg.Psm == PWR_SAVE)
-			return;
-
-
-		// if the traffic is low, use average rssi as the criteria
-		if (pAd->Mlme.bLowThroughput == TRUE)
-		{
-			rssi0 = pAd->StaCfg.RssiSample.LastRssi0;
-			rssi1 = pAd->StaCfg.RssiSample.LastRssi1;
-			rssi2 = pAd->StaCfg.RssiSample.LastRssi2;
-		}
-		else
-		{
-			rssi0 = pAd->StaCfg.RssiSample.AvgRssi0;
-			rssi1 = pAd->StaCfg.RssiSample.AvgRssi1;
-			rssi2 = pAd->StaCfg.RssiSample.AvgRssi2;
-		}
-
-		if(pAd->Antenna.field.RxPath == 3)
-		{
-			larger = max(rssi0, rssi1);
-
-			if (larger > (rssi2 + 20))
-				pAd->Mlme.RealRxPath = 2;
-			else
-				pAd->Mlme.RealRxPath = 3;
-		}
-		else if(pAd->Antenna.field.RxPath == 2)
-		{
-			if (rssi0 > (rssi1 + 20))
-				pAd->Mlme.RealRxPath = 1;
-			else
-				pAd->Mlme.RealRxPath = 2;
-		}
-
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3);
-		BBPR3 &= (~0x18);
-		if(pAd->Mlme.RealRxPath == 3)
-		{
-			BBPR3 |= (0x10);
-		}
-		else if(pAd->Mlme.RealRxPath == 2)
-		{
-			BBPR3 |= (0x8);
-		}
-		else if(pAd->Mlme.RealRxPath == 1)
-		{
-			BBPR3 |= (0x0);
-		}
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
-	}
-
-#endif // CONFIG_STA_SUPPORT //
-
-}
-
-
-
-VOID APSDPeriodicExec(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3)
-{
-	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;
-
-	if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
-		return;
-
-	pAd->CommonCfg.TriggerTimerCount++;
-
-// Driver should not send trigger frame, it should be send by application layer
-/*
-	if (pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable
-		&& (pAd->CommonCfg.bNeedSendTriggerFrame ||
-		(((pAd->CommonCfg.TriggerTimerCount%20) == 19) && (!pAd->CommonCfg.bAPSDAC_BE || !pAd->CommonCfg.bAPSDAC_BK || !pAd->CommonCfg.bAPSDAC_VI || !pAd->CommonCfg.bAPSDAC_VO))))
-	{
-		DBGPRINT(RT_DEBUG_TRACE,("Sending trigger frame and enter service period when support APSD\n"));
-		RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, TRUE);
-		pAd->CommonCfg.bNeedSendTriggerFrame = FALSE;
-		pAd->CommonCfg.TriggerTimerCount = 0;
-		pAd->CommonCfg.bInServicePeriod = TRUE;
-	}*/
-}
-
-/*
-    ========================================================================
-    Routine Description:
-        Set/reset MAC registers according to bPiggyBack parameter
-
-    Arguments:
-        pAd         - Adapter pointer
-        bPiggyBack  - Enable / Disable Piggy-Back
-
-    Return Value:
-        None
-
-    ========================================================================
-*/
-VOID RTMPSetPiggyBack(
-    IN PRTMP_ADAPTER    pAd,
-    IN BOOLEAN          bPiggyBack)
-{
-	TX_LINK_CFG_STRUC  TxLinkCfg;
-
-	RTMP_IO_READ32(pAd, TX_LINK_CFG, &TxLinkCfg.word);
-
-	TxLinkCfg.field.TxCFAckEn = bPiggyBack;
-	RTMP_IO_WRITE32(pAd, TX_LINK_CFG, TxLinkCfg.word);
-}
-
-/*
-    ========================================================================
-    Routine Description:
-        check if this entry need to switch rate automatically
-
-    Arguments:
-        pAd
-        pEntry
-
-    Return Value:
-        TURE
-        FALSE
-
-    ========================================================================
-*/
-BOOLEAN RTMPCheckEntryEnableAutoRateSwitch(
-	IN PRTMP_ADAPTER    pAd,
-	IN PMAC_TABLE_ENTRY	pEntry)
-{
-	BOOLEAN		result = TRUE;
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// only associated STA counts
-		if (pEntry && (pEntry->ValidAsCLI) && (pEntry->Sst == SST_ASSOC))
-		{
-			result = pAd->StaCfg.bAutoTxRateSwitch;
-		}
-		else
-			result = FALSE;
-
-#ifdef QOS_DLS_SUPPORT
-		if (pEntry && (pEntry->ValidAsDls))
-			result = pAd->StaCfg.bAutoTxRateSwitch;
-#endif // QOS_DLS_SUPPORT //
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-
-
-	return result;
-}
-
-
-BOOLEAN RTMPAutoRateSwitchCheck(
-	IN PRTMP_ADAPTER    pAd)
-{
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if (pAd->StaCfg.bAutoTxRateSwitch)
-			return TRUE;
-	}
-#endif // CONFIG_STA_SUPPORT //
-	return FALSE;
-}
-
-
-/*
-    ========================================================================
-    Routine Description:
-        check if this entry need to fix tx legacy rate
-
-    Arguments:
-        pAd
-        pEntry
-
-    Return Value:
-        TURE
-        FALSE
-
-    ========================================================================
-*/
-UCHAR RTMPStaFixedTxMode(
-	IN PRTMP_ADAPTER    pAd,
-	IN PMAC_TABLE_ENTRY	pEntry)
-{
-	UCHAR	tx_mode = FIXED_TXMODE_HT;
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		tx_mode = (UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode;
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	return tx_mode;
-}
-
-/*
-    ========================================================================
-    Routine Description:
-        Overwrite HT Tx Mode by Fixed Legency Tx Mode, if specified.
-
-    Arguments:
-        pAd
-        pEntry
-
-    Return Value:
-        TURE
-        FALSE
-
-    ========================================================================
-*/
-VOID RTMPUpdateLegacyTxSetting(
-		UCHAR				fixed_tx_mode,
-		PMAC_TABLE_ENTRY	pEntry)
-{
-	HTTRANSMIT_SETTING TransmitSetting;
-
-	if (fixed_tx_mode == FIXED_TXMODE_HT)
-		return;
-
-	TransmitSetting.word = 0;
-
-	TransmitSetting.field.MODE = pEntry->HTPhyMode.field.MODE;
-	TransmitSetting.field.MCS = pEntry->HTPhyMode.field.MCS;
-
-	if (fixed_tx_mode == FIXED_TXMODE_CCK)
-	{
-		TransmitSetting.field.MODE = MODE_CCK;
-		// CCK mode allow MCS 0~3
-		if (TransmitSetting.field.MCS > MCS_3)
-			TransmitSetting.field.MCS = MCS_3;
-	}
-	else
-	{
-		TransmitSetting.field.MODE = MODE_OFDM;
-		// OFDM mode allow MCS 0~7
-		if (TransmitSetting.field.MCS > MCS_7)
-			TransmitSetting.field.MCS = MCS_7;
-	}
-
-	if (pEntry->HTPhyMode.field.MODE >= TransmitSetting.field.MODE)
-	{
-		pEntry->HTPhyMode.word = TransmitSetting.word;
-		DBGPRINT(RT_DEBUG_TRACE, ("RTMPUpdateLegacyTxSetting : wcid-%d, MODE=%s, MCS=%d \n",
-				pEntry->Aid, GetPhyMode(pEntry->HTPhyMode.field.MODE), pEntry->HTPhyMode.field.MCS));
-	}
-}
-
-#ifdef CONFIG_STA_SUPPORT
-/*
-	==========================================================================
-	Description:
-		dynamic tune BBP R66 to find a balance between sensibility and
-		noise isolation
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AsicStaBbpTuning(
-	IN PRTMP_ADAPTER pAd)
-{
-	UCHAR	OrigR66Value = 0, R66;//, R66UpperBound = 0x30, R66LowerBound = 0x30;
-	CHAR	Rssi;
-
-	// 2860C did not support Fase CCA, therefore can't tune
-	if (pAd->MACVersion == 0x28600100)
-		return;
-
-	//
-	// work as a STA
-	//
-	if (pAd->Mlme.CntlMachine.CurrState != CNTL_IDLE)  // no R66 tuning when SCANNING
-		return;
-
-	if ((pAd->OpMode == OPMODE_STA)
-		&& (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
-			)
-		&& !(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
-		)
-	{
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66, &OrigR66Value);
-		R66 = OrigR66Value;
-
-		if (pAd->Antenna.field.RxPath > 1)
-			Rssi = (pAd->StaCfg.RssiSample.AvgRssi0 + pAd->StaCfg.RssiSample.AvgRssi1) >> 1;
-		else
-			Rssi = pAd->StaCfg.RssiSample.AvgRssi0;
-
-		if (pAd->LatchRfRegs.Channel <= 14)
-		{	//BG band
-#ifdef RT2870
-			// RT3070 is a no LNA solution, it should have different control regarding to AGC gain control
-			// Otherwise, it will have some throughput side effect when low RSSI
-			if (IS_RT3070(pAd))
-			{
-				if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY)
-				{
-					R66 = 0x1C + 2*GET_LNA_GAIN(pAd) + 0x20;
-					if (OrigR66Value != R66)
-					{
-						RTUSBWriteBBPRegister(pAd, BBP_R66, R66);
-					}
-				}
-				else
-				{
-					R66 = 0x1C + 2*GET_LNA_GAIN(pAd);
-					if (OrigR66Value != R66)
-					{
-						RTUSBWriteBBPRegister(pAd, BBP_R66, R66);
-					}
-				}
-			}
-			else
-#endif // RT2870 //
-			{
-				if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY)
-				{
-					R66 = (0x2E + GET_LNA_GAIN(pAd)) + 0x10;
-					if (OrigR66Value != R66)
-					{
-						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-					}
-				}
-				else
-				{
-					R66 = 0x2E + GET_LNA_GAIN(pAd);
-					if (OrigR66Value != R66)
-					{
-						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-					}
-				}
-			}
-		}
-		else
-		{	//A band
-			if (pAd->CommonCfg.BBPCurrentBW == BW_20)
-			{
-				if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY)
-				{
-					R66 = 0x32 + (GET_LNA_GAIN(pAd)*5)/3 + 0x10;
-					if (OrigR66Value != R66)
-					{
-						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-					}
-				}
-				else
-				{
-					R66 = 0x32 + (GET_LNA_GAIN(pAd)*5)/3;
-					if (OrigR66Value != R66)
-					{
-						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-					}
-				}
-			}
-			else
-			{
-				if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY)
-				{
-					R66 = 0x3A + (GET_LNA_GAIN(pAd)*5)/3 + 0x10;
-					if (OrigR66Value != R66)
-					{
-						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-					}
-				}
-				else
-				{
-					R66 = 0x3A + (GET_LNA_GAIN(pAd)*5)/3;
-					if (OrigR66Value != R66)
-					{
-						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-					}
-				}
-			}
-		}
-
-
-	}
-}
-#endif // CONFIG_STA_SUPPORT //
-
-VOID RTMPSetAGCInitValue(
-	IN PRTMP_ADAPTER	pAd,
-	IN UCHAR			BandWidth)
-{
-	UCHAR	R66 = 0x30;
-
-	if (pAd->LatchRfRegs.Channel <= 14)
-	{	// BG band
-		R66 = 0x2E + GET_LNA_GAIN(pAd);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-	}
-	else
-	{	//A band
-		if (BandWidth == BW_20)
-		{
-			R66 = (UCHAR)(0x32 + (GET_LNA_GAIN(pAd)*5)/3);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-		}
-#ifdef DOT11_N_SUPPORT
-		else
-		{
-			R66 = (UCHAR)(0x3A + (GET_LNA_GAIN(pAd)*5)/3);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-		}
-#endif // DOT11_N_SUPPORT //
-	}
-
-}
-
-VOID AsicTurnOffRFClk(
-	IN PRTMP_ADAPTER pAd,
-	IN	UCHAR		Channel)
-{
-
-	// RF R2 bit 18 = 0
-	UINT32			R1 = 0, R2 = 0, R3 = 0;
-	UCHAR			index;
-	RTMP_RF_REGS	*RFRegTable;
-
-	RFRegTable = RF2850RegTable;
-
-	switch (pAd->RfIcType)
-	{
-		case RFIC_2820:
-		case RFIC_2850:
-		case RFIC_2720:
-		case RFIC_2750:
-
-			for (index = 0; index < NUM_OF_2850_CHNL; index++)
-			{
-				if (Channel == RFRegTable[index].Channel)
-				{
-					R1 = RFRegTable[index].R1 & 0xffffdfff;
-					R2 = RFRegTable[index].R2 & 0xfffbffff;
-					R3 = RFRegTable[index].R3 & 0xfff3ffff;
-
-					RTMP_RF_IO_WRITE32(pAd, R1);
-					RTMP_RF_IO_WRITE32(pAd, R2);
-
-					// Program R1b13 to 1, R3/b18,19 to 0, R2b18 to 0.
-					// Set RF R2 bit18=0, R3 bit[18:19]=0
-					//if (pAd->StaCfg.bRadio == FALSE)
-					if (1)
-					{
-						RTMP_RF_IO_WRITE32(pAd, R3);
-
-						DBGPRINT(RT_DEBUG_TRACE, ("AsicTurnOffRFClk#%d(RF=%d, ) , R2=0x%08x,  R3 = 0x%08x \n",
-							Channel, pAd->RfIcType, R2, R3));
-					}
-					else
-						DBGPRINT(RT_DEBUG_TRACE, ("AsicTurnOffRFClk#%d(RF=%d, ) , R2=0x%08x \n",
-							Channel, pAd->RfIcType, R2));
-					break;
-				}
-			}
-			break;
-
-		default:
-			break;
-	}
-}
-
-
-VOID AsicTurnOnRFClk(
-	IN PRTMP_ADAPTER pAd,
-	IN	UCHAR			Channel)
-{
-
-	// RF R2 bit 18 = 0
-	UINT32			R1 = 0, R2 = 0, R3 = 0;
-	UCHAR			index;
-	RTMP_RF_REGS	*RFRegTable;
-
-	RFRegTable = RF2850RegTable;
-
-	switch (pAd->RfIcType)
-	{
-		case RFIC_2820:
-		case RFIC_2850:
-		case RFIC_2720:
-		case RFIC_2750:
-
-			for (index = 0; index < NUM_OF_2850_CHNL; index++)
-			{
-				if (Channel == RFRegTable[index].Channel)
-				{
-					R3 = pAd->LatchRfRegs.R3;
-					R3 &= 0xfff3ffff;
-					R3 |= 0x00080000;
-					RTMP_RF_IO_WRITE32(pAd, R3);
-
-					R1 = RFRegTable[index].R1;
-					RTMP_RF_IO_WRITE32(pAd, R1);
-
-					R2 = RFRegTable[index].R2;
-					if (pAd->Antenna.field.TxPath == 1)
-					{
-						R2 |= 0x4000;	// If TXpath is 1, bit 14 = 1;
-					}
-
-					if (pAd->Antenna.field.RxPath == 2)
-					{
-						R2 |= 0x40;	// write 1 to off Rxpath.
-					}
-					else if (pAd->Antenna.field.RxPath == 1)
-					{
-						R2 |= 0x20040;	// write 1 to off RxPath
-					}
-					RTMP_RF_IO_WRITE32(pAd, R2);
-
-					break;
-				}
-			}
-			break;
-
-		default:
-			break;
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("AsicTurnOnRFClk#%d(RF=%d, ) , R2=0x%08x\n",
-		Channel,
-		pAd->RfIcType,
-		R2));
-}
-
+#include "../../rt2860/common/mlme.c"
diff --git a/drivers/staging/rt2870/common/netif_block.c b/drivers/staging/rt2870/common/netif_block.c
deleted file mode 100644
index d3f7d087e7f..00000000000
--- a/drivers/staging/rt2870/common/netif_block.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-#include "../rt_config.h"
-#include "netif_block.h"
-
-static NETIF_ENTRY freeNetIfEntryPool[FREE_NETIF_POOL_SIZE];
-static LIST_HEADER freeNetIfEntryList;
-
-void initblockQueueTab(
-	IN PRTMP_ADAPTER pAd)
-{
-	int i;
-
-	initList(&freeNetIfEntryList);
-	for (i = 0; i < FREE_NETIF_POOL_SIZE; i++)
-		insertTailList(&freeNetIfEntryList, (PLIST_ENTRY)&freeNetIfEntryPool[i]);
-
-	for (i=0; i < NUM_OF_TX_RING; i++)
-		initList(&pAd->blockQueueTab[i].NetIfList);
-
-	return;
-}
-
-BOOLEAN blockNetIf(
-	IN PBLOCK_QUEUE_ENTRY pBlockQueueEntry,
-	IN PNET_DEV pNetDev)
-{
-	PNETIF_ENTRY pNetIfEntry = NULL;
-
-	if ((pNetIfEntry = (PNETIF_ENTRY)removeHeadList(&freeNetIfEntryList)) != NULL)
-	{
-		netif_stop_queue(pNetDev);
-		pNetIfEntry->pNetDev = pNetDev;
-		insertTailList(&pBlockQueueEntry->NetIfList, (PLIST_ENTRY)pNetIfEntry);
-
-		pBlockQueueEntry->SwTxQueueBlockFlag = TRUE;
-		DBGPRINT(RT_DEBUG_TRACE, ("netif_stop_queue(%s)\n", pNetDev->name));
-	}
-	else
-		return FALSE;
-
-	return TRUE;
-}
-
-VOID releaseNetIf(
-	IN PBLOCK_QUEUE_ENTRY pBlockQueueEntry)
-{
-	PNETIF_ENTRY pNetIfEntry = NULL;
-	PLIST_HEADER pNetIfList = &pBlockQueueEntry->NetIfList;
-
-	while((pNetIfEntry = (PNETIF_ENTRY)removeHeadList(pNetIfList)) !=  NULL)
-	{
-		PNET_DEV pNetDev = pNetIfEntry->pNetDev;
-		netif_wake_queue(pNetDev);
-		insertTailList(&freeNetIfEntryList, (PLIST_ENTRY)pNetIfEntry);
-
-		DBGPRINT(RT_DEBUG_TRACE, ("netif_wake_queue(%s)\n", pNetDev->name));
-	}
-	pBlockQueueEntry->SwTxQueueBlockFlag = FALSE;
-	return;
-}
-
-
-VOID StopNetIfQueue(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR QueIdx,
-	IN PNDIS_PACKET pPacket)
-{
-	PNET_DEV NetDev = NULL;
-	UCHAR IfIdx = 0;
-	BOOLEAN valid = FALSE;
-
-#ifdef APCLI_SUPPORT
-	if (RTMP_GET_PACKET_NET_DEVICE(pPacket) >= MIN_NET_DEVICE_FOR_APCLI)
-	{
-		IfIdx = (RTMP_GET_PACKET_NET_DEVICE(pPacket) - MIN_NET_DEVICE_FOR_APCLI) % MAX_APCLI_NUM;
-		NetDev = pAd->ApCfg.ApCliTab[IfIdx].dev;
-	}
-	else
-#endif // APCLI_SUPPORT //
-#ifdef WDS_SUPPORT
-	if (RTMP_GET_PACKET_NET_DEVICE(pPacket) >= MIN_NET_DEVICE_FOR_WDS)
-	{
-		IfIdx = (RTMP_GET_PACKET_NET_DEVICE(pPacket) - MIN_NET_DEVICE_FOR_WDS) % MAX_WDS_ENTRY;
-		NetDev = pAd->WdsTab.WdsEntry[IfIdx].dev;
-	}
-	else
-#endif // WDS_SUPPORT //
-	{
-#ifdef MBSS_SUPPORT
-		if (pAd->OpMode == OPMODE_AP)
-		{
-			IfIdx = (RTMP_GET_PACKET_NET_DEVICE(pPacket) - MIN_NET_DEVICE_FOR_MBSSID) % MAX_MBSSID_NUM;
-			NetDev = pAd->ApCfg.MBSSID[IfIdx].MSSIDDev;
-		}
-		else
-		{
-			IfIdx = MAIN_MBSSID;
-			NetDev = pAd->net_dev;
-		}
-#else
-		IfIdx = MAIN_MBSSID;
-		NetDev = pAd->net_dev;
-#endif
-	}
-
-	// WMM support 4 software queues.
-	// One software queue full doesn't mean device have no capbility to transmit packet.
-	// So disable block Net-If queue function while WMM enable.
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		valid = (pAd->CommonCfg.bWmmCapable == TRUE) ? FALSE : TRUE;
-#endif // CONFIG_STA_SUPPORT //
-
-	if (valid)
-		blockNetIf(&pAd->blockQueueTab[QueIdx], NetDev);
-	return;
-}
-
diff --git a/drivers/staging/rt2870/common/rtmp_init.c b/drivers/staging/rt2870/common/rtmp_init.c
index 099b6a806f8..eef10efda19 100644
--- a/drivers/staging/rt2870/common/rtmp_init.c
+++ b/drivers/staging/rt2870/common/rtmp_init.c
@@ -1,4132 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	rtmp_init.c
-
-	Abstract:
-	Miniport generic portion header file
-
-	Revision History:
-	Who         When          What
-	--------    ----------    ----------------------------------------------
-	Paul Lin    2002-08-01    created
-    John Chang  2004-08-20    RT2561/2661 use scatter-gather scheme
-    Jan Lee  2006-09-15    RT2860. Change for 802.11n , EEPROM, Led, BA, HT.
-*/
-#include "../rt_config.h"
-#include "firmware.h"
-
-//#define BIN_IN_FILE /* use *.bin firmware */
-
-UCHAR    BIT8[] = {0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80};
-ULONG    BIT32[] = {0x00000001, 0x00000002, 0x00000004, 0x00000008,
-					0x00000010, 0x00000020, 0x00000040, 0x00000080,
-					0x00000100, 0x00000200, 0x00000400, 0x00000800,
-					0x00001000, 0x00002000, 0x00004000, 0x00008000,
-					0x00010000, 0x00020000, 0x00040000, 0x00080000,
-					0x00100000, 0x00200000, 0x00400000, 0x00800000,
-					0x01000000, 0x02000000, 0x04000000, 0x08000000,
-					0x10000000, 0x20000000, 0x40000000, 0x80000000};
-
-char*   CipherName[] = {"none","wep64","wep128","TKIP","AES","CKIP64","CKIP128"};
-
-const unsigned short ccitt_16Table[] = {
-	0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50A5, 0x60C6, 0x70E7,
-	0x8108, 0x9129, 0xA14A, 0xB16B, 0xC18C, 0xD1AD, 0xE1CE, 0xF1EF,
-	0x1231, 0x0210, 0x3273, 0x2252, 0x52B5, 0x4294, 0x72F7, 0x62D6,
-	0x9339, 0x8318, 0xB37B, 0xA35A, 0xD3BD, 0xC39C, 0xF3FF, 0xE3DE,
-	0x2462, 0x3443, 0x0420, 0x1401, 0x64E6, 0x74C7, 0x44A4, 0x5485,
-	0xA56A, 0xB54B, 0x8528, 0x9509, 0xE5EE, 0xF5CF, 0xC5AC, 0xD58D,
-	0x3653, 0x2672, 0x1611, 0x0630, 0x76D7, 0x66F6, 0x5695, 0x46B4,
-	0xB75B, 0xA77A, 0x9719, 0x8738, 0xF7DF, 0xE7FE, 0xD79D, 0xC7BC,
-	0x48C4, 0x58E5, 0x6886, 0x78A7, 0x0840, 0x1861, 0x2802, 0x3823,
-	0xC9CC, 0xD9ED, 0xE98E, 0xF9AF, 0x8948, 0x9969, 0xA90A, 0xB92B,
-	0x5AF5, 0x4AD4, 0x7AB7, 0x6A96, 0x1A71, 0x0A50, 0x3A33, 0x2A12,
-	0xDBFD, 0xCBDC, 0xFBBF, 0xEB9E, 0x9B79, 0x8B58, 0xBB3B, 0xAB1A,
-	0x6CA6, 0x7C87, 0x4CE4, 0x5CC5, 0x2C22, 0x3C03, 0x0C60, 0x1C41,
-	0xEDAE, 0xFD8F, 0xCDEC, 0xDDCD, 0xAD2A, 0xBD0B, 0x8D68, 0x9D49,
-	0x7E97, 0x6EB6, 0x5ED5, 0x4EF4, 0x3E13, 0x2E32, 0x1E51, 0x0E70,
-	0xFF9F, 0xEFBE, 0xDFDD, 0xCFFC, 0xBF1B, 0xAF3A, 0x9F59, 0x8F78,
-	0x9188, 0x81A9, 0xB1CA, 0xA1EB, 0xD10C, 0xC12D, 0xF14E, 0xE16F,
-	0x1080, 0x00A1, 0x30C2, 0x20E3, 0x5004, 0x4025, 0x7046, 0x6067,
-	0x83B9, 0x9398, 0xA3FB, 0xB3DA, 0xC33D, 0xD31C, 0xE37F, 0xF35E,
-	0x02B1, 0x1290, 0x22F3, 0x32D2, 0x4235, 0x5214, 0x6277, 0x7256,
-	0xB5EA, 0xA5CB, 0x95A8, 0x8589, 0xF56E, 0xE54F, 0xD52C, 0xC50D,
-	0x34E2, 0x24C3, 0x14A0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405,
-	0xA7DB, 0xB7FA, 0x8799, 0x97B8, 0xE75F, 0xF77E, 0xC71D, 0xD73C,
-	0x26D3, 0x36F2, 0x0691, 0x16B0, 0x6657, 0x7676, 0x4615, 0x5634,
-	0xD94C, 0xC96D, 0xF90E, 0xE92F, 0x99C8, 0x89E9, 0xB98A, 0xA9AB,
-	0x5844, 0x4865, 0x7806, 0x6827, 0x18C0, 0x08E1, 0x3882, 0x28A3,
-	0xCB7D, 0xDB5C, 0xEB3F, 0xFB1E, 0x8BF9, 0x9BD8, 0xABBB, 0xBB9A,
-	0x4A75, 0x5A54, 0x6A37, 0x7A16, 0x0AF1, 0x1AD0, 0x2AB3, 0x3A92,
-	0xFD2E, 0xED0F, 0xDD6C, 0xCD4D, 0xBDAA, 0xAD8B, 0x9DE8, 0x8DC9,
-	0x7C26, 0x6C07, 0x5C64, 0x4C45, 0x3CA2, 0x2C83, 0x1CE0, 0x0CC1,
-	0xEF1F, 0xFF3E, 0xCF5D, 0xDF7C, 0xAF9B, 0xBFBA, 0x8FD9, 0x9FF8,
-	0x6E17, 0x7E36, 0x4E55, 0x5E74, 0x2E93, 0x3EB2, 0x0ED1, 0x1EF0
-};
-#define ByteCRC16(v, crc) \
-	(unsigned short)((crc << 8) ^  ccitt_16Table[((crc >> 8) ^ (v)) & 255])
-
-unsigned char BitReverse(unsigned char x)
-{
-	int i;
-	unsigned char Temp=0;
-	for(i=0; ; i++)
-	{
-		if(x & 0x80)	Temp |= 0x80;
-		if(i==7)		break;
-		x	<<= 1;
-		Temp >>= 1;
-	}
-	return Temp;
-}
-
-//
-// BBP register initialization set
-//
-REG_PAIR   BBPRegTable[] = {
-	{BBP_R65,		0x2C},		// fix rssi issue
-	{BBP_R66,		0x38},	// Also set this default value to pAd->BbpTuning.R66CurrentValue at initial
-	{BBP_R69,		0x12},
-	{BBP_R70,		0xa},	// BBP_R70 will change to 0x8 in ApStartUp and LinkUp for rt2860C, otherwise value is 0xa
-	{BBP_R73,		0x10},
-	{BBP_R81,		0x37},
-	{BBP_R82,		0x62},
-	{BBP_R83,		0x6A},
-	{BBP_R84,		0x99},	// 0x19 is for rt2860E and after. This is for extension channel overlapping IOT. 0x99 is for rt2860D and before
-	{BBP_R86,		0x00},	// middle range issue, Rory @2008-01-28
-	{BBP_R91,		0x04},	// middle range issue, Rory @2008-01-28
-	{BBP_R92,		0x00},	// middle range issue, Rory @2008-01-28
-	{BBP_R103,  	0x00}, 	// near range high-power issue, requested from Gary @2008-0528
-	{BBP_R105,		0x05},	// 0x05 is for rt2860E to turn on FEQ control. It is safe for rt2860D and before, because Bit 7:2 are reserved in rt2860D and before.
-};
-#define	NUM_BBP_REG_PARMS	(sizeof(BBPRegTable) / sizeof(REG_PAIR))
-
-//
-// RF register initialization set
-//
-#ifdef RT2870
-REG_PAIR   RT30xx_RFRegTable[] = {
-        {RF_R04,          0x40},
-        {RF_R05,          0x03},
-        {RF_R06,          0x02},
-        {RF_R07,          0x70},
-        {RF_R09,          0x0F},
-        {RF_R10,          0x71},
-        {RF_R11,          0x21},
-        {RF_R12,          0x7B},
-        {RF_R14,          0x90},
-        {RF_R15,          0x58},
-        {RF_R16,          0xB3},
-        {RF_R17,          0x92},
-        {RF_R18,          0x2C},
-        {RF_R19,          0x02},
-        {RF_R20,          0xBA},
-        {RF_R21,          0xDB},
-        {RF_R24,          0x16},
-        {RF_R25,          0x01},
-        {RF_R27,          0x03},
-        {RF_R29,          0x1F},
-};
-#define	NUM_RF_REG_PARMS	(sizeof(RT30xx_RFRegTable) / sizeof(REG_PAIR))
-#endif // RT2870 //
-
-//
-// ASIC register initialization sets
-//
-
-RTMP_REG_PAIR	MACRegTable[] =	{
-#if defined(HW_BEACON_OFFSET) && (HW_BEACON_OFFSET == 0x200)
-	{BCN_OFFSET0,			0xf8f0e8e0}, /* 0x3800(e0), 0x3A00(e8), 0x3C00(f0), 0x3E00(f8), 512B for each beacon */
-	{BCN_OFFSET1,			0x6f77d0c8}, /* 0x3200(c8), 0x3400(d0), 0x1DC0(77), 0x1BC0(6f), 512B for each beacon */
-#elif defined(HW_BEACON_OFFSET) && (HW_BEACON_OFFSET == 0x100)
-	{BCN_OFFSET0,			0xece8e4e0}, /* 0x3800, 0x3A00, 0x3C00, 0x3E00, 512B for each beacon */
-	{BCN_OFFSET1,			0xfcf8f4f0}, /* 0x3800, 0x3A00, 0x3C00, 0x3E00, 512B for each beacon */
-#else
-    #error You must re-calculate new value for BCN_OFFSET0 & BCN_OFFSET1 in MACRegTable[]!!!
-#endif // HW_BEACON_OFFSET //
-
-	{LEGACY_BASIC_RATE,		0x0000013f}, //  Basic rate set bitmap
-	{HT_BASIC_RATE,		0x00008003}, // Basic HT rate set , 20M, MCS=3, MM. Format is the same as in TXWI.
-	{MAC_SYS_CTRL,		0x00}, // 0x1004, , default Disable RX
-	{RX_FILTR_CFG,		0x17f97}, //0x1400  , RX filter control,
-	{BKOFF_SLOT_CFG,	0x209}, // default set short slot time, CC_DELAY_TIME should be 2
-	{TX_SW_CFG0,		0x0}, 		// Gary,2008-05-21 for CWC test
-	{TX_SW_CFG1,		0x80606}, // Gary,2006-08-23
-	{TX_LINK_CFG,		0x1020},		// Gary,2006-08-23
-	//{TX_TIMEOUT_CFG,	0x00182090},	// CCK has some problem. So increase timieout value. 2006-10-09// MArvek RT
-	{TX_TIMEOUT_CFG,	0x000a2090},	// CCK has some problem. So increase timieout value. 2006-10-09// MArvek RT , Modify for 2860E ,2007-08-01
-	{MAX_LEN_CFG,		MAX_AGGREGATION_SIZE | 0x00001000},	// 0x3018, MAX frame length. Max PSDU = 16kbytes.
-	{LED_CFG,		0x7f031e46}, // Gary, 2006-08-23
-	{PBF_MAX_PCNT,			0x1F3FBF9F}, 	//0x1F3f7f9f},		//Jan, 2006/04/20
-	//{TX_RTY_CFG,			0x6bb80408},	// Jan, 2006/11/16
-	{TX_RTY_CFG,			0x47d01f0f},	// Jan, 2006/11/16, Set TxWI->ACK =0 in Probe Rsp Modify for 2860E ,2007-08-03
-	{AUTO_RSP_CFG,			0x00000013},	// Initial Auto_Responder, because QA will turn off Auto-Responder
-	{CCK_PROT_CFG,			0x05740003 /*0x01740003*/},	// Initial Auto_Responder, because QA will turn off Auto-Responder. And RTS threshold is enabled.
-	{OFDM_PROT_CFG,			0x05740003 /*0x01740003*/},	// Initial Auto_Responder, because QA will turn off Auto-Responder. And RTS threshold is enabled.
-#ifdef RT2870
-	{PBF_CFG, 				0xf40006}, 		// Only enable Queue 2
-	{MM40_PROT_CFG,			0x3F44084},		// Initial Auto_Responder, because QA will turn off Auto-Responder
-	{WPDMA_GLO_CFG,			0x00000030},
-#endif // RT2870 //
-	{GF20_PROT_CFG,			0x01744004},    // set 19:18 --> Short NAV for MIMO PS
-	{GF40_PROT_CFG,			0x03F44084},
-	{MM20_PROT_CFG,			0x01744004},
-	{TXOP_CTRL_CFG,			0x0000583f, /*0x0000243f*/ /*0x000024bf*/},	//Extension channel backoff.
-	{TX_RTS_CFG,			0x00092b20},
-//#ifdef WIFI_TEST
-	{EXP_ACK_TIME,			0x002400ca},	// default value
-//#else
-//	{EXP_ACK_TIME,			0x005400ca},	// suggested by Gray @ 20070323 for 11n intel-sta throughput
-//#endif // end - WIFI_TEST //
-	{TXOP_HLDR_ET, 			0x00000002},
-
-	/* Jerry comments 2008/01/16: we use SIFS = 10us in CCK defaultly, but it seems that 10us
-		is too small for INTEL 2200bg card, so in MBSS mode, the delta time between beacon0
-		and beacon1 is SIFS (10us), so if INTEL 2200bg card connects to BSS0, the ping
-		will always lost. So we change the SIFS of CCK from 10us to 16us. */
-	{XIFS_TIME_CFG,			0x33a41010},
-	{PWR_PIN_CFG,			0x00000003},	// patch for 2880-E
-};
-
-
-#ifdef CONFIG_STA_SUPPORT
-RTMP_REG_PAIR	STAMACRegTable[] =	{
-	{WMM_AIFSN_CFG,		0x00002273},
-	{WMM_CWMIN_CFG,	0x00002344},
-	{WMM_CWMAX_CFG,	0x000034aa},
-};
-#endif // CONFIG_STA_SUPPORT //
-
-#define	NUM_MAC_REG_PARMS		(sizeof(MACRegTable) / sizeof(RTMP_REG_PAIR))
-#ifdef CONFIG_STA_SUPPORT
-#define	NUM_STA_MAC_REG_PARMS	(sizeof(STAMACRegTable) / sizeof(RTMP_REG_PAIR))
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef RT2870
-//
-// RT2870 Firmware Spec only used 1 oct for version expression
-//
-#define FIRMWARE_MINOR_VERSION	7
-
-#endif // RT2870 //
-
-// New 8k byte firmware size for RT3071/RT3072
-#define FIRMWAREIMAGE_MAX_LENGTH	0x2000
-#define FIRMWAREIMAGE_LENGTH		(sizeof (FirmwareImage) / sizeof(UCHAR))
-#define FIRMWARE_MAJOR_VERSION	0
-
-#define FIRMWAREIMAGEV1_LENGTH	0x1000
-#define FIRMWAREIMAGEV2_LENGTH	0x1000
-
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Allocate RTMP_ADAPTER data block and do some initialization
-
-	Arguments:
-		Adapter		Pointer to our adapter
-
-	Return Value:
-		NDIS_STATUS_SUCCESS
-		NDIS_STATUS_FAILURE
-
-	IRQL = PASSIVE_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-NDIS_STATUS	RTMPAllocAdapterBlock(
-	IN  PVOID	handle,
-	OUT	PRTMP_ADAPTER	*ppAdapter)
-{
-	PRTMP_ADAPTER	pAd;
-	NDIS_STATUS		Status;
-	INT 			index;
-	UCHAR			*pBeaconBuf = NULL;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("--> RTMPAllocAdapterBlock\n"));
-
-	*ppAdapter = NULL;
-
-	do
-	{
-		// Allocate RTMP_ADAPTER memory block
-		pBeaconBuf = kmalloc(MAX_BEACON_SIZE, MEM_ALLOC_FLAG);
-		if (pBeaconBuf == NULL)
-		{
-			Status = NDIS_STATUS_FAILURE;
-			DBGPRINT_ERR(("Failed to allocate memory - BeaconBuf!\n"));
-			break;
-		}
-
-		Status = AdapterBlockAllocateMemory(handle, (PVOID *)&pAd);
-		if (Status != NDIS_STATUS_SUCCESS)
-		{
-			DBGPRINT_ERR(("Failed to allocate memory - ADAPTER\n"));
-			break;
-		}
-		pAd->BeaconBuf = pBeaconBuf;
-		printk("\n\n=== pAd = %p, size = %d ===\n\n", pAd, (UINT32)sizeof(RTMP_ADAPTER));
-
-
-		// Init spin locks
-		NdisAllocateSpinLock(&pAd->MgmtRingLock);
-
-		for (index =0 ; index < NUM_OF_TX_RING; index++)
-		{
-			NdisAllocateSpinLock(&pAd->TxSwQueueLock[index]);
-			NdisAllocateSpinLock(&pAd->DeQueueLock[index]);
-			pAd->DeQueueRunning[index] = FALSE;
-		}
-
-		NdisAllocateSpinLock(&pAd->irq_lock);
-
-	} while (FALSE);
-
-	if ((Status != NDIS_STATUS_SUCCESS) && (pBeaconBuf))
-		kfree(pBeaconBuf);
-
-	*ppAdapter = pAd;
-
-	DBGPRINT_S(Status, ("<-- RTMPAllocAdapterBlock, Status=%x\n", Status));
-	return Status;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Read initial Tx power per MCS and BW from EEPROM
-
-	Arguments:
-		Adapter						Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPReadTxPwrPerRate(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	ULONG		data, Adata, Gdata;
-	USHORT		i, value, value2;
-	INT			Apwrdelta, Gpwrdelta;
-	UCHAR		t1,t2,t3,t4;
-	BOOLEAN		bValid, bApwrdeltaMinus = TRUE, bGpwrdeltaMinus = TRUE;
-
-	//
-	// Get power delta for 20MHz and 40MHz.
-	//
-	DBGPRINT(RT_DEBUG_TRACE, ("Txpower per Rate\n"));
-	RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_DELTA, value2);
-	Apwrdelta = 0;
-	Gpwrdelta = 0;
-
-	if ((value2 & 0xff) != 0xff)
-	{
-		if ((value2 & 0x80))
-			Gpwrdelta = (value2&0xf);
-
-		if ((value2 & 0x40))
-			bGpwrdeltaMinus = FALSE;
-		else
-			bGpwrdeltaMinus = TRUE;
-	}
-	if ((value2 & 0xff00) != 0xff00)
-	{
-		if ((value2 & 0x8000))
-			Apwrdelta = ((value2&0xf00)>>8);
-
-		if ((value2 & 0x4000))
-			bApwrdeltaMinus = FALSE;
-		else
-			bApwrdeltaMinus = TRUE;
-	}
-	DBGPRINT(RT_DEBUG_TRACE, ("Gpwrdelta = %x, Apwrdelta = %x .\n", Gpwrdelta, Apwrdelta));
-
-	//
-	// Get Txpower per MCS for 20MHz in 2.4G.
-	//
-	for (i=0; i<5; i++)
-	{
-		RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_20MHZ_2_4G + i*4, value);
-		data = value;
-		if (bApwrdeltaMinus == FALSE)
-		{
-			t1 = (value&0xf)+(Apwrdelta);
-			if (t1 > 0xf)
-				t1 = 0xf;
-			t2 = ((value&0xf0)>>4)+(Apwrdelta);
-			if (t2 > 0xf)
-				t2 = 0xf;
-			t3 = ((value&0xf00)>>8)+(Apwrdelta);
-			if (t3 > 0xf)
-				t3 = 0xf;
-			t4 = ((value&0xf000)>>12)+(Apwrdelta);
-			if (t4 > 0xf)
-				t4 = 0xf;
-		}
-		else
-		{
-			if ((value&0xf) > Apwrdelta)
-				t1 = (value&0xf)-(Apwrdelta);
-			else
-				t1 = 0;
-			if (((value&0xf0)>>4) > Apwrdelta)
-				t2 = ((value&0xf0)>>4)-(Apwrdelta);
-			else
-				t2 = 0;
-			if (((value&0xf00)>>8) > Apwrdelta)
-				t3 = ((value&0xf00)>>8)-(Apwrdelta);
-			else
-				t3 = 0;
-			if (((value&0xf000)>>12) > Apwrdelta)
-				t4 = ((value&0xf000)>>12)-(Apwrdelta);
-			else
-				t4 = 0;
-		}
-		Adata = t1 + (t2<<4) + (t3<<8) + (t4<<12);
-		if (bGpwrdeltaMinus == FALSE)
-		{
-			t1 = (value&0xf)+(Gpwrdelta);
-			if (t1 > 0xf)
-				t1 = 0xf;
-			t2 = ((value&0xf0)>>4)+(Gpwrdelta);
-			if (t2 > 0xf)
-				t2 = 0xf;
-			t3 = ((value&0xf00)>>8)+(Gpwrdelta);
-			if (t3 > 0xf)
-				t3 = 0xf;
-			t4 = ((value&0xf000)>>12)+(Gpwrdelta);
-			if (t4 > 0xf)
-				t4 = 0xf;
-		}
-		else
-		{
-			if ((value&0xf) > Gpwrdelta)
-				t1 = (value&0xf)-(Gpwrdelta);
-			else
-				t1 = 0;
-			if (((value&0xf0)>>4) > Gpwrdelta)
-				t2 = ((value&0xf0)>>4)-(Gpwrdelta);
-			else
-				t2 = 0;
-			if (((value&0xf00)>>8) > Gpwrdelta)
-				t3 = ((value&0xf00)>>8)-(Gpwrdelta);
-			else
-				t3 = 0;
-			if (((value&0xf000)>>12) > Gpwrdelta)
-				t4 = ((value&0xf000)>>12)-(Gpwrdelta);
-			else
-				t4 = 0;
-		}
-		Gdata = t1 + (t2<<4) + (t3<<8) + (t4<<12);
-
-		RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_20MHZ_2_4G + i*4 + 2, value);
-		if (bApwrdeltaMinus == FALSE)
-		{
-			t1 = (value&0xf)+(Apwrdelta);
-			if (t1 > 0xf)
-				t1 = 0xf;
-			t2 = ((value&0xf0)>>4)+(Apwrdelta);
-			if (t2 > 0xf)
-				t2 = 0xf;
-			t3 = ((value&0xf00)>>8)+(Apwrdelta);
-			if (t3 > 0xf)
-				t3 = 0xf;
-			t4 = ((value&0xf000)>>12)+(Apwrdelta);
-			if (t4 > 0xf)
-				t4 = 0xf;
-		}
-		else
-		{
-			if ((value&0xf) > Apwrdelta)
-				t1 = (value&0xf)-(Apwrdelta);
-			else
-				t1 = 0;
-			if (((value&0xf0)>>4) > Apwrdelta)
-				t2 = ((value&0xf0)>>4)-(Apwrdelta);
-			else
-				t2 = 0;
-			if (((value&0xf00)>>8) > Apwrdelta)
-				t3 = ((value&0xf00)>>8)-(Apwrdelta);
-			else
-				t3 = 0;
-			if (((value&0xf000)>>12) > Apwrdelta)
-				t4 = ((value&0xf000)>>12)-(Apwrdelta);
-			else
-				t4 = 0;
-		}
-		Adata |= ((t1<<16) + (t2<<20) + (t3<<24) + (t4<<28));
-		if (bGpwrdeltaMinus == FALSE)
-		{
-			t1 = (value&0xf)+(Gpwrdelta);
-			if (t1 > 0xf)
-				t1 = 0xf;
-			t2 = ((value&0xf0)>>4)+(Gpwrdelta);
-			if (t2 > 0xf)
-				t2 = 0xf;
-			t3 = ((value&0xf00)>>8)+(Gpwrdelta);
-			if (t3 > 0xf)
-				t3 = 0xf;
-			t4 = ((value&0xf000)>>12)+(Gpwrdelta);
-			if (t4 > 0xf)
-				t4 = 0xf;
-		}
-		else
-		{
-			if ((value&0xf) > Gpwrdelta)
-				t1 = (value&0xf)-(Gpwrdelta);
-			else
-				t1 = 0;
-			if (((value&0xf0)>>4) > Gpwrdelta)
-				t2 = ((value&0xf0)>>4)-(Gpwrdelta);
-			else
-				t2 = 0;
-			if (((value&0xf00)>>8) > Gpwrdelta)
-				t3 = ((value&0xf00)>>8)-(Gpwrdelta);
-			else
-				t3 = 0;
-			if (((value&0xf000)>>12) > Gpwrdelta)
-				t4 = ((value&0xf000)>>12)-(Gpwrdelta);
-			else
-				t4 = 0;
-		}
-		Gdata |= ((t1<<16) + (t2<<20) + (t3<<24) + (t4<<28));
-		data |= (value<<16);
-
-		pAd->Tx20MPwrCfgABand[i] = pAd->Tx40MPwrCfgABand[i] = Adata;
-		pAd->Tx20MPwrCfgGBand[i] = pAd->Tx40MPwrCfgGBand[i] = Gdata;
-
-		if (data != 0xffffffff)
-			RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, data);
-		DBGPRINT_RAW(RT_DEBUG_TRACE, ("20MHz BW, 2.4G band-%lx,  Adata = %lx,  Gdata = %lx \n", data, Adata, Gdata));
-	}
-
-	//
-	// Check this block is valid for 40MHz in 2.4G. If invalid, use parameter for 20MHz in 2.4G
-	//
-	bValid = TRUE;
-	for (i=0; i<6; i++)
-	{
-		RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_40MHZ_2_4G + 2 + i*2, value);
-		if (((value & 0x00FF) == 0x00FF) || ((value & 0xFF00) == 0xFF00))
-		{
-			bValid = FALSE;
-			break;
-		}
-	}
-
-	//
-	// Get Txpower per MCS for 40MHz in 2.4G.
-	//
-	if (bValid)
-	{
-		for (i=0; i<4; i++)
-		{
-			RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_40MHZ_2_4G + i*4, value);
-			if (bGpwrdeltaMinus == FALSE)
-			{
-				t1 = (value&0xf)+(Gpwrdelta);
-				if (t1 > 0xf)
-					t1 = 0xf;
-				t2 = ((value&0xf0)>>4)+(Gpwrdelta);
-				if (t2 > 0xf)
-					t2 = 0xf;
-				t3 = ((value&0xf00)>>8)+(Gpwrdelta);
-				if (t3 > 0xf)
-					t3 = 0xf;
-				t4 = ((value&0xf000)>>12)+(Gpwrdelta);
-				if (t4 > 0xf)
-					t4 = 0xf;
-			}
-			else
-			{
-				if ((value&0xf) > Gpwrdelta)
-					t1 = (value&0xf)-(Gpwrdelta);
-				else
-					t1 = 0;
-				if (((value&0xf0)>>4) > Gpwrdelta)
-					t2 = ((value&0xf0)>>4)-(Gpwrdelta);
-				else
-					t2 = 0;
-				if (((value&0xf00)>>8) > Gpwrdelta)
-					t3 = ((value&0xf00)>>8)-(Gpwrdelta);
-				else
-					t3 = 0;
-				if (((value&0xf000)>>12) > Gpwrdelta)
-					t4 = ((value&0xf000)>>12)-(Gpwrdelta);
-				else
-					t4 = 0;
-			}
-			Gdata = t1 + (t2<<4) + (t3<<8) + (t4<<12);
-
-			RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_40MHZ_2_4G + i*4 + 2, value);
-			if (bGpwrdeltaMinus == FALSE)
-			{
-				t1 = (value&0xf)+(Gpwrdelta);
-				if (t1 > 0xf)
-					t1 = 0xf;
-				t2 = ((value&0xf0)>>4)+(Gpwrdelta);
-				if (t2 > 0xf)
-					t2 = 0xf;
-				t3 = ((value&0xf00)>>8)+(Gpwrdelta);
-				if (t3 > 0xf)
-					t3 = 0xf;
-				t4 = ((value&0xf000)>>12)+(Gpwrdelta);
-				if (t4 > 0xf)
-					t4 = 0xf;
-			}
-			else
-			{
-				if ((value&0xf) > Gpwrdelta)
-					t1 = (value&0xf)-(Gpwrdelta);
-				else
-					t1 = 0;
-				if (((value&0xf0)>>4) > Gpwrdelta)
-					t2 = ((value&0xf0)>>4)-(Gpwrdelta);
-				else
-					t2 = 0;
-				if (((value&0xf00)>>8) > Gpwrdelta)
-					t3 = ((value&0xf00)>>8)-(Gpwrdelta);
-				else
-					t3 = 0;
-				if (((value&0xf000)>>12) > Gpwrdelta)
-					t4 = ((value&0xf000)>>12)-(Gpwrdelta);
-				else
-					t4 = 0;
-			}
-			Gdata |= ((t1<<16) + (t2<<20) + (t3<<24) + (t4<<28));
-
-			if (i == 0)
-				pAd->Tx40MPwrCfgGBand[i+1] = (pAd->Tx40MPwrCfgGBand[i+1] & 0x0000FFFF) | (Gdata & 0xFFFF0000);
-			else
-				pAd->Tx40MPwrCfgGBand[i+1] = Gdata;
-
-			DBGPRINT_RAW(RT_DEBUG_TRACE, ("40MHz BW, 2.4G band, Gdata = %lx \n", Gdata));
-		}
-	}
-
-	//
-	// Check this block is valid for 20MHz in 5G. If invalid, use parameter for 20MHz in 2.4G
-	//
-	bValid = TRUE;
-	for (i=0; i<8; i++)
-	{
-		RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_20MHZ_5G + 2 + i*2, value);
-		if (((value & 0x00FF) == 0x00FF) || ((value & 0xFF00) == 0xFF00))
-		{
-			bValid = FALSE;
-			break;
-		}
-	}
-
-	//
-	// Get Txpower per MCS for 20MHz in 5G.
-	//
-	if (bValid)
-	{
-		for (i=0; i<5; i++)
-		{
-			RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_20MHZ_5G + i*4, value);
-			if (bApwrdeltaMinus == FALSE)
-			{
-				t1 = (value&0xf)+(Apwrdelta);
-				if (t1 > 0xf)
-					t1 = 0xf;
-				t2 = ((value&0xf0)>>4)+(Apwrdelta);
-				if (t2 > 0xf)
-					t2 = 0xf;
-				t3 = ((value&0xf00)>>8)+(Apwrdelta);
-				if (t3 > 0xf)
-					t3 = 0xf;
-				t4 = ((value&0xf000)>>12)+(Apwrdelta);
-				if (t4 > 0xf)
-					t4 = 0xf;
-			}
-			else
-			{
-				if ((value&0xf) > Apwrdelta)
-					t1 = (value&0xf)-(Apwrdelta);
-				else
-					t1 = 0;
-				if (((value&0xf0)>>4) > Apwrdelta)
-					t2 = ((value&0xf0)>>4)-(Apwrdelta);
-				else
-					t2 = 0;
-				if (((value&0xf00)>>8) > Apwrdelta)
-					t3 = ((value&0xf00)>>8)-(Apwrdelta);
-				else
-					t3 = 0;
-				if (((value&0xf000)>>12) > Apwrdelta)
-					t4 = ((value&0xf000)>>12)-(Apwrdelta);
-				else
-					t4 = 0;
-			}
-			Adata = t1 + (t2<<4) + (t3<<8) + (t4<<12);
-
-			RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_20MHZ_5G + i*4 + 2, value);
-			if (bApwrdeltaMinus == FALSE)
-			{
-				t1 = (value&0xf)+(Apwrdelta);
-				if (t1 > 0xf)
-					t1 = 0xf;
-				t2 = ((value&0xf0)>>4)+(Apwrdelta);
-				if (t2 > 0xf)
-					t2 = 0xf;
-				t3 = ((value&0xf00)>>8)+(Apwrdelta);
-				if (t3 > 0xf)
-					t3 = 0xf;
-				t4 = ((value&0xf000)>>12)+(Apwrdelta);
-				if (t4 > 0xf)
-					t4 = 0xf;
-			}
-			else
-			{
-				if ((value&0xf) > Apwrdelta)
-					t1 = (value&0xf)-(Apwrdelta);
-				else
-					t1 = 0;
-				if (((value&0xf0)>>4) > Apwrdelta)
-					t2 = ((value&0xf0)>>4)-(Apwrdelta);
-				else
-					t2 = 0;
-				if (((value&0xf00)>>8) > Apwrdelta)
-					t3 = ((value&0xf00)>>8)-(Apwrdelta);
-				else
-					t3 = 0;
-				if (((value&0xf000)>>12) > Apwrdelta)
-					t4 = ((value&0xf000)>>12)-(Apwrdelta);
-				else
-					t4 = 0;
-			}
-			Adata |= ((t1<<16) + (t2<<20) + (t3<<24) + (t4<<28));
-
-			if (i == 0)
-				pAd->Tx20MPwrCfgABand[i] = (pAd->Tx20MPwrCfgABand[i] & 0x0000FFFF) | (Adata & 0xFFFF0000);
-			else
-				pAd->Tx20MPwrCfgABand[i] = Adata;
-
-			DBGPRINT_RAW(RT_DEBUG_TRACE, ("20MHz BW, 5GHz band, Adata = %lx \n", Adata));
-		}
-	}
-
-	//
-	// Check this block is valid for 40MHz in 5G. If invalid, use parameter for 20MHz in 2.4G
-	//
-	bValid = TRUE;
-	for (i=0; i<6; i++)
-	{
-		RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_40MHZ_5G + 2 + i*2, value);
-		if (((value & 0x00FF) == 0x00FF) || ((value & 0xFF00) == 0xFF00))
-		{
-			bValid = FALSE;
-			break;
-		}
-	}
-
-	//
-	// Get Txpower per MCS for 40MHz in 5G.
-	//
-	if (bValid)
-	{
-		for (i=0; i<4; i++)
-		{
-			RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_40MHZ_5G + i*4, value);
-			if (bApwrdeltaMinus == FALSE)
-			{
-				t1 = (value&0xf)+(Apwrdelta);
-				if (t1 > 0xf)
-					t1 = 0xf;
-				t2 = ((value&0xf0)>>4)+(Apwrdelta);
-				if (t2 > 0xf)
-					t2 = 0xf;
-				t3 = ((value&0xf00)>>8)+(Apwrdelta);
-				if (t3 > 0xf)
-					t3 = 0xf;
-				t4 = ((value&0xf000)>>12)+(Apwrdelta);
-				if (t4 > 0xf)
-					t4 = 0xf;
-			}
-			else
-			{
-				if ((value&0xf) > Apwrdelta)
-					t1 = (value&0xf)-(Apwrdelta);
-				else
-					t1 = 0;
-				if (((value&0xf0)>>4) > Apwrdelta)
-					t2 = ((value&0xf0)>>4)-(Apwrdelta);
-				else
-					t2 = 0;
-				if (((value&0xf00)>>8) > Apwrdelta)
-					t3 = ((value&0xf00)>>8)-(Apwrdelta);
-				else
-					t3 = 0;
-				if (((value&0xf000)>>12) > Apwrdelta)
-					t4 = ((value&0xf000)>>12)-(Apwrdelta);
-				else
-					t4 = 0;
-			}
-			Adata = t1 + (t2<<4) + (t3<<8) + (t4<<12);
-
-			RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_40MHZ_5G + i*4 + 2, value);
-			if (bApwrdeltaMinus == FALSE)
-			{
-				t1 = (value&0xf)+(Apwrdelta);
-				if (t1 > 0xf)
-					t1 = 0xf;
-				t2 = ((value&0xf0)>>4)+(Apwrdelta);
-				if (t2 > 0xf)
-					t2 = 0xf;
-				t3 = ((value&0xf00)>>8)+(Apwrdelta);
-				if (t3 > 0xf)
-					t3 = 0xf;
-				t4 = ((value&0xf000)>>12)+(Apwrdelta);
-				if (t4 > 0xf)
-					t4 = 0xf;
-			}
-			else
-			{
-				if ((value&0xf) > Apwrdelta)
-					t1 = (value&0xf)-(Apwrdelta);
-				else
-					t1 = 0;
-				if (((value&0xf0)>>4) > Apwrdelta)
-					t2 = ((value&0xf0)>>4)-(Apwrdelta);
-				else
-					t2 = 0;
-				if (((value&0xf00)>>8) > Apwrdelta)
-					t3 = ((value&0xf00)>>8)-(Apwrdelta);
-				else
-					t3 = 0;
-				if (((value&0xf000)>>12) > Apwrdelta)
-					t4 = ((value&0xf000)>>12)-(Apwrdelta);
-				else
-					t4 = 0;
-			}
-			Adata |= ((t1<<16) + (t2<<20) + (t3<<24) + (t4<<28));
-
-			if (i == 0)
-				pAd->Tx40MPwrCfgABand[i+1] = (pAd->Tx40MPwrCfgABand[i+1] & 0x0000FFFF) | (Adata & 0xFFFF0000);
-			else
-				pAd->Tx40MPwrCfgABand[i+1] = Adata;
-
-			DBGPRINT_RAW(RT_DEBUG_TRACE, ("40MHz BW, 5GHz band, Adata = %lx \n", Adata));
-		}
-	}
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Read initial channel power parameters from EEPROM
-
-	Arguments:
-		Adapter						Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPReadChannelPwr(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	UCHAR				i, choffset;
-	EEPROM_TX_PWR_STRUC	    Power;
-	EEPROM_TX_PWR_STRUC	    Power2;
-
-	// Read Tx power value for all channels
-	// Value from 1 - 0x7f. Default value is 24.
-	// Power value : 2.4G 0x00 (0) ~ 0x1F (31)
-	//             : 5.5G 0xF9 (-7) ~ 0x0F (15)
-
-	// 0. 11b/g, ch1 - ch 14
-	for (i = 0; i < 7; i++)
-	{
-//		Power.word = RTMP_EEPROM_READ16(pAd, EEPROM_G_TX_PWR_OFFSET + i * 2);
-//		Power2.word = RTMP_EEPROM_READ16(pAd, EEPROM_G_TX2_PWR_OFFSET + i * 2);
-		RT28xx_EEPROM_READ16(pAd, EEPROM_G_TX_PWR_OFFSET + i * 2, Power.word);
-		RT28xx_EEPROM_READ16(pAd, EEPROM_G_TX2_PWR_OFFSET + i * 2, Power2.word);
-		pAd->TxPower[i * 2].Channel = i * 2 + 1;
-		pAd->TxPower[i * 2 + 1].Channel = i * 2 + 2;
-
-		if ((Power.field.Byte0 > 31) || (Power.field.Byte0 < 0))
-			pAd->TxPower[i * 2].Power = DEFAULT_RF_TX_POWER;
-		else
-			pAd->TxPower[i * 2].Power = Power.field.Byte0;
-
-		if ((Power.field.Byte1 > 31) || (Power.field.Byte1 < 0))
-			pAd->TxPower[i * 2 + 1].Power = DEFAULT_RF_TX_POWER;
-		else
-			pAd->TxPower[i * 2 + 1].Power = Power.field.Byte1;
-
-		if ((Power2.field.Byte0 > 31) || (Power2.field.Byte0 < 0))
-			pAd->TxPower[i * 2].Power2 = DEFAULT_RF_TX_POWER;
-		else
-			pAd->TxPower[i * 2].Power2 = Power2.field.Byte0;
-
-		if ((Power2.field.Byte1 > 31) || (Power2.field.Byte1 < 0))
-			pAd->TxPower[i * 2 + 1].Power2 = DEFAULT_RF_TX_POWER;
-		else
-			pAd->TxPower[i * 2 + 1].Power2 = Power2.field.Byte1;
-	}
-
-	// 1. U-NII lower/middle band: 36, 38, 40; 44, 46, 48; 52, 54, 56; 60, 62, 64 (including central frequency in BW 40MHz)
-	// 1.1 Fill up channel
-	choffset = 14;
-	for (i = 0; i < 4; i++)
-	{
-		pAd->TxPower[3 * i + choffset + 0].Channel	= 36 + i * 8 + 0;
-		pAd->TxPower[3 * i + choffset + 0].Power	= DEFAULT_RF_TX_POWER;
-		pAd->TxPower[3 * i + choffset + 0].Power2	= DEFAULT_RF_TX_POWER;
-
-		pAd->TxPower[3 * i + choffset + 1].Channel	= 36 + i * 8 + 2;
-		pAd->TxPower[3 * i + choffset + 1].Power	= DEFAULT_RF_TX_POWER;
-		pAd->TxPower[3 * i + choffset + 1].Power2	= DEFAULT_RF_TX_POWER;
-
-		pAd->TxPower[3 * i + choffset + 2].Channel	= 36 + i * 8 + 4;
-		pAd->TxPower[3 * i + choffset + 2].Power	= DEFAULT_RF_TX_POWER;
-		pAd->TxPower[3 * i + choffset + 2].Power2	= DEFAULT_RF_TX_POWER;
-	}
-
-	// 1.2 Fill up power
-	for (i = 0; i < 6; i++)
-	{
-//		Power.word = RTMP_EEPROM_READ16(pAd, EEPROM_A_TX_PWR_OFFSET + i * 2);
-//		Power2.word = RTMP_EEPROM_READ16(pAd, EEPROM_A_TX2_PWR_OFFSET + i * 2);
-		RT28xx_EEPROM_READ16(pAd, EEPROM_A_TX_PWR_OFFSET + i * 2, Power.word);
-		RT28xx_EEPROM_READ16(pAd, EEPROM_A_TX2_PWR_OFFSET + i * 2, Power2.word);
-
-		if ((Power.field.Byte0 < 16) && (Power.field.Byte0 >= -7))
-			pAd->TxPower[i * 2 + choffset + 0].Power = Power.field.Byte0;
-
-		if ((Power.field.Byte1 < 16) && (Power.field.Byte1 >= -7))
-			pAd->TxPower[i * 2 + choffset + 1].Power = Power.field.Byte1;
-
-		if ((Power2.field.Byte0 < 16) && (Power2.field.Byte0 >= -7))
-			pAd->TxPower[i * 2 + choffset + 0].Power2 = Power2.field.Byte0;
-
-		if ((Power2.field.Byte1 < 16) && (Power2.field.Byte1 >= -7))
-			pAd->TxPower[i * 2 + choffset + 1].Power2 = Power2.field.Byte1;
-	}
-
-	// 2. HipperLAN 2 100, 102 ,104; 108, 110, 112; 116, 118, 120; 124, 126, 128; 132, 134, 136; 140 (including central frequency in BW 40MHz)
-	// 2.1 Fill up channel
-	choffset = 14 + 12;
-	for (i = 0; i < 5; i++)
-	{
-		pAd->TxPower[3 * i + choffset + 0].Channel	= 100 + i * 8 + 0;
-		pAd->TxPower[3 * i + choffset + 0].Power	= DEFAULT_RF_TX_POWER;
-		pAd->TxPower[3 * i + choffset + 0].Power2	= DEFAULT_RF_TX_POWER;
-
-		pAd->TxPower[3 * i + choffset + 1].Channel	= 100 + i * 8 + 2;
-		pAd->TxPower[3 * i + choffset + 1].Power	= DEFAULT_RF_TX_POWER;
-		pAd->TxPower[3 * i + choffset + 1].Power2	= DEFAULT_RF_TX_POWER;
-
-		pAd->TxPower[3 * i + choffset + 2].Channel	= 100 + i * 8 + 4;
-		pAd->TxPower[3 * i + choffset + 2].Power	= DEFAULT_RF_TX_POWER;
-		pAd->TxPower[3 * i + choffset + 2].Power2	= DEFAULT_RF_TX_POWER;
-	}
-	pAd->TxPower[3 * 5 + choffset + 0].Channel		= 140;
-	pAd->TxPower[3 * 5 + choffset + 0].Power		= DEFAULT_RF_TX_POWER;
-	pAd->TxPower[3 * 5 + choffset + 0].Power2		= DEFAULT_RF_TX_POWER;
-
-	// 2.2 Fill up power
-	for (i = 0; i < 8; i++)
-	{
-//		Power.word = RTMP_EEPROM_READ16(pAd, EEPROM_A_TX_PWR_OFFSET + (choffset - 14) + i * 2);
-//		Power2.word = RTMP_EEPROM_READ16(pAd, EEPROM_A_TX2_PWR_OFFSET + (choffset - 14) + i * 2);
-		RT28xx_EEPROM_READ16(pAd, EEPROM_A_TX_PWR_OFFSET + (choffset - 14) + i * 2, Power.word);
-		RT28xx_EEPROM_READ16(pAd, EEPROM_A_TX2_PWR_OFFSET + (choffset - 14) + i * 2, Power2.word);
-
-		if ((Power.field.Byte0 < 16) && (Power.field.Byte0 >= -7))
-			pAd->TxPower[i * 2 + choffset + 0].Power = Power.field.Byte0;
-
-		if ((Power.field.Byte1 < 16) && (Power.field.Byte1 >= -7))
-			pAd->TxPower[i * 2 + choffset + 1].Power = Power.field.Byte1;
-
-		if ((Power2.field.Byte0 < 16) && (Power2.field.Byte0 >= -7))
-			pAd->TxPower[i * 2 + choffset + 0].Power2 = Power2.field.Byte0;
-
-		if ((Power2.field.Byte1 < 16) && (Power2.field.Byte1 >= -7))
-			pAd->TxPower[i * 2 + choffset + 1].Power2 = Power2.field.Byte1;
-	}
-
-	// 3. U-NII upper band: 149, 151, 153; 157, 159, 161; 165 (including central frequency in BW 40MHz)
-	// 3.1 Fill up channel
-	choffset = 14 + 12 + 16;
-	for (i = 0; i < 2; i++)
-	{
-		pAd->TxPower[3 * i + choffset + 0].Channel	= 149 + i * 8 + 0;
-		pAd->TxPower[3 * i + choffset + 0].Power	= DEFAULT_RF_TX_POWER;
-		pAd->TxPower[3 * i + choffset + 0].Power2	= DEFAULT_RF_TX_POWER;
-
-		pAd->TxPower[3 * i + choffset + 1].Channel	= 149 + i * 8 + 2;
-		pAd->TxPower[3 * i + choffset + 1].Power	= DEFAULT_RF_TX_POWER;
-		pAd->TxPower[3 * i + choffset + 1].Power2	= DEFAULT_RF_TX_POWER;
-
-		pAd->TxPower[3 * i + choffset + 2].Channel	= 149 + i * 8 + 4;
-		pAd->TxPower[3 * i + choffset + 2].Power	= DEFAULT_RF_TX_POWER;
-		pAd->TxPower[3 * i + choffset + 2].Power2	= DEFAULT_RF_TX_POWER;
-	}
-	pAd->TxPower[3 * 2 + choffset + 0].Channel		= 165;
-	pAd->TxPower[3 * 2 + choffset + 0].Power		= DEFAULT_RF_TX_POWER;
-	pAd->TxPower[3 * 2 + choffset + 0].Power2		= DEFAULT_RF_TX_POWER;
-
-	// 3.2 Fill up power
-	for (i = 0; i < 4; i++)
-	{
-//		Power.word = RTMP_EEPROM_READ16(pAd, EEPROM_A_TX_PWR_OFFSET + (choffset - 14) + i * 2);
-//		Power2.word = RTMP_EEPROM_READ16(pAd, EEPROM_A_TX2_PWR_OFFSET + (choffset - 14) + i * 2);
-		RT28xx_EEPROM_READ16(pAd, EEPROM_A_TX_PWR_OFFSET + (choffset - 14) + i * 2, Power.word);
-		RT28xx_EEPROM_READ16(pAd, EEPROM_A_TX2_PWR_OFFSET + (choffset - 14) + i * 2, Power2.word);
-
-		if ((Power.field.Byte0 < 16) && (Power.field.Byte0 >= -7))
-			pAd->TxPower[i * 2 + choffset + 0].Power = Power.field.Byte0;
-
-		if ((Power.field.Byte1 < 16) && (Power.field.Byte1 >= -7))
-			pAd->TxPower[i * 2 + choffset + 1].Power = Power.field.Byte1;
-
-		if ((Power2.field.Byte0 < 16) && (Power2.field.Byte0 >= -7))
-			pAd->TxPower[i * 2 + choffset + 0].Power2 = Power2.field.Byte0;
-
-		if ((Power2.field.Byte1 < 16) && (Power2.field.Byte1 >= -7))
-			pAd->TxPower[i * 2 + choffset + 1].Power2 = Power2.field.Byte1;
-	}
-
-	// 4. Print and Debug
-	choffset = 14 + 12 + 16 + 7;
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Read the following from the registry
-		1. All the parameters
-		2. NetworkAddres
-
-	Arguments:
-		Adapter						Pointer to our adapter
-		WrapperConfigurationContext	For use by NdisOpenConfiguration
-
-	Return Value:
-		NDIS_STATUS_SUCCESS
-		NDIS_STATUS_FAILURE
-		NDIS_STATUS_RESOURCES
-
-	IRQL = PASSIVE_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-NDIS_STATUS	NICReadRegParameters(
-	IN	PRTMP_ADAPTER		pAd,
-	IN	NDIS_HANDLE			WrapperConfigurationContext
-	)
-{
-	NDIS_STATUS						Status = NDIS_STATUS_SUCCESS;
-	DBGPRINT_S(Status, ("<-- NICReadRegParameters, Status=%x\n", Status));
-	return Status;
-}
-
-
-#ifdef RT2870
-/*
-	========================================================================
-
-	Routine Description:
-		For RF filter calibration purpose
-
-	Arguments:
-		pAd                          Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-
-	========================================================================
-*/
-VOID RTUSBFilterCalibration(
-	IN PRTMP_ADAPTER pAd)
-{
-	UCHAR	R55x = 0, value, FilterTarget = 0x1E, BBPValue;
-	UINT	loop = 0, count = 0, loopcnt = 0, ReTry = 0;
-	UCHAR	RF_R24_Value = 0;
-
-	// Give bbp filter initial value
-	pAd->Mlme.CaliBW20RfR24 = 0x16;
-	pAd->Mlme.CaliBW40RfR24 = 0x36;  //Bit[5] must be 1 for BW 40
-
-	do
-	{
-		if (loop == 1)	//BandWidth = 40 MHz
-		{
-			// Write 0x27 to RF_R24 to program filter
-			RF_R24_Value = 0x27;
-			RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
-			FilterTarget = 0x19;
-
-			// when calibrate BW40, BBP mask must set to BW40.
-			RTUSBReadBBPRegister(pAd, BBP_R4, &BBPValue);
-			BBPValue&= (~0x18);
-			BBPValue|= (0x10);
-			RTUSBWriteBBPRegister(pAd, BBP_R4, BBPValue);
-		}
-		else			//BandWidth = 20 MHz
-		{
-			// Write 0x07 to RF_R24 to program filter
-			RF_R24_Value = 0x07;
-			RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
-			FilterTarget = 0x16;
-		}
-
-		// Write 0x01 to RF_R22 to enable baseband loopback mode
-		RT30xxReadRFRegister(pAd, RF_R22, &value);
-		value |= 0x01;
-		RT30xxWriteRFRegister(pAd, RF_R22, value);
-
-		// Write 0x00 to BBP_R24 to set power & frequency of passband test tone
-		RTUSBWriteBBPRegister(pAd, BBP_R24, 0);
-
-		do
-		{
-			// Write 0x90 to BBP_R25 to transmit test tone
-			RTUSBWriteBBPRegister(pAd, BBP_R25, 0x90);
-
-			RTMPusecDelay(1000);
-			// Read BBP_R55[6:0] for received power, set R55x = BBP_R55[6:0]
-			RTUSBReadBBPRegister(pAd, BBP_R55, &value);
-			R55x = value & 0xFF;
-
-		} while ((ReTry++ < 100) && (R55x == 0));
-
-		// Write 0x06 to BBP_R24 to set power & frequency of stopband test tone
-		RTUSBWriteBBPRegister(pAd, BBP_R24, 0x06);
-
-		while(TRUE)
-		{
-			// Write 0x90 to BBP_R25 to transmit test tone
-			RTUSBWriteBBPRegister(pAd, BBP_R25, 0x90);
-
-			//We need to wait for calibration
-			RTMPusecDelay(1000);
-			RTUSBReadBBPRegister(pAd, BBP_R55, &value);
-			value &= 0xFF;
-			if ((R55x - value) < FilterTarget)
-			{
-				RF_R24_Value ++;
-			}
-			else if ((R55x - value) == FilterTarget)
-			{
-				RF_R24_Value ++;
-				count ++;
-			}
-			else
-			{
-				break;
-			}
-
-			// prevent infinite loop cause driver hang.
-			if (loopcnt++ > 100)
-			{
-				DBGPRINT(RT_DEBUG_ERROR, ("RTUSBFilterCalibration - can't find a valid value, loopcnt=%d stop calibrating", loopcnt));
-				break;
-			}
-
-			// Write RF_R24 to program filter
-			RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
-		}
-
-		if (count > 0)
-		{
-			RF_R24_Value = RF_R24_Value - ((count) ? (1) : (0));
-		}
-
-		// Store for future usage
-		if (loopcnt < 100)
-		{
-			if (loop++ == 0)
-			{
-				//BandWidth = 20 MHz
-				pAd->Mlme.CaliBW20RfR24 = (UCHAR)RF_R24_Value;
-			}
-			else
-			{
-				//BandWidth = 40 MHz
-				pAd->Mlme.CaliBW40RfR24 = (UCHAR)RF_R24_Value;
-				break;
-			}
-		}
-		else
-			break;
-
-		RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
-
-		// reset count
-		count = 0;
-	} while(TRUE);
-
-	//
-	// Set back to initial state
-	//
-	RTUSBWriteBBPRegister(pAd, BBP_R24, 0);
-
-	RT30xxReadRFRegister(pAd, RF_R22, &value);
-	value &= ~(0x01);
-	RT30xxWriteRFRegister(pAd, RF_R22, value);
-
-	// set BBP back to BW20
-	RTUSBReadBBPRegister(pAd, BBP_R4, &BBPValue);
-	BBPValue&= (~0x18);
-	RTUSBWriteBBPRegister(pAd, BBP_R4, BBPValue);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("RTUSBFilterCalibration - CaliBW20RfR24=0x%x, CaliBW40RfR24=0x%x\n", pAd->Mlme.CaliBW20RfR24, pAd->Mlme.CaliBW40RfR24));
-}
-
-
-VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd)
-{
-	INT i;
-	// Driver must read EEPROM to get RfIcType before initial RF registers
-	// Initialize RF register to default value
-        if (IS_RT3070(pAd) && ((pAd->RfIcType == RFIC_3020) ||(pAd->RfIcType == RFIC_2020)))
-        {
-                // Init RF calibration
-                // Driver should toggle RF R30 bit7 before init RF registers
-                ULONG RfReg = 0;
-                RT30xxReadRFRegister(pAd, RF_R30, (PUCHAR)&RfReg);
-                RfReg |= 0x80;
-                RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg);
-                RTMPusecDelay(1000);
-                RfReg &= 0x7F;
-                RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg);
-
-                // Initialize RF register to default value
-                for (i = 0; i < NUM_RF_REG_PARMS; i++)
-                {
-                        RT30xxWriteRFRegister(pAd, RT30xx_RFRegTable[i].Register, RT30xx_RFRegTable[i].Value);
-                }
-
-                //For RF filter Calibration
-                RTUSBFilterCalibration(pAd);
-        }
-
-}
-#endif // RT2870 //
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Read initial parameters from EEPROM
-
-	Arguments:
-		Adapter						Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	NICReadEEPROMParameters(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			mac_addr)
-{
-	UINT32			data = 0;
-	USHORT			i, value, value2;
-	UCHAR			TmpPhy;
-	EEPROM_TX_PWR_STRUC	    Power;
-	EEPROM_VERSION_STRUC    Version;
-	EEPROM_ANTENNA_STRUC	Antenna;
-	EEPROM_NIC_CONFIG2_STRUC    NicConfig2;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("--> NICReadEEPROMParameters\n"));
-
-	// Init EEPROM Address Number, before access EEPROM; if 93c46, EEPROMAddressNum=6, else if 93c66, EEPROMAddressNum=8
-	RTMP_IO_READ32(pAd, E2PROM_CSR, &data);
-	DBGPRINT(RT_DEBUG_TRACE, ("--> E2PROM_CSR = 0x%x\n", data));
-
-	if((data & 0x30) == 0)
-		pAd->EEPROMAddressNum = 6;		// 93C46
-	else if((data & 0x30) == 0x10)
-		pAd->EEPROMAddressNum = 8;     // 93C66
-	else
-		pAd->EEPROMAddressNum = 8;     // 93C86
-	DBGPRINT(RT_DEBUG_TRACE, ("--> EEPROMAddressNum = %d\n", pAd->EEPROMAddressNum ));
-
-	// RT2860 MAC no longer auto load MAC address from E2PROM. Driver has to intialize
-	// MAC address registers according to E2PROM setting
-	if (mac_addr == NULL ||
-		strlen(mac_addr) != 17 ||
-		mac_addr[2] != ':'  || mac_addr[5] != ':'  || mac_addr[8] != ':' ||
-		mac_addr[11] != ':' || mac_addr[14] != ':')
-	{
-		USHORT  Addr01,Addr23,Addr45 ;
-
-		RT28xx_EEPROM_READ16(pAd, 0x04, Addr01);
-		RT28xx_EEPROM_READ16(pAd, 0x06, Addr23);
-		RT28xx_EEPROM_READ16(pAd, 0x08, Addr45);
-
-		pAd->PermanentAddress[0] = (UCHAR)(Addr01 & 0xff);
-		pAd->PermanentAddress[1] = (UCHAR)(Addr01 >> 8);
-		pAd->PermanentAddress[2] = (UCHAR)(Addr23 & 0xff);
-		pAd->PermanentAddress[3] = (UCHAR)(Addr23 >> 8);
-		pAd->PermanentAddress[4] = (UCHAR)(Addr45 & 0xff);
-		pAd->PermanentAddress[5] = (UCHAR)(Addr45 >> 8);
-
-		DBGPRINT(RT_DEBUG_TRACE, ("Initialize MAC Address from E2PROM \n"));
-	}
-	else
-	{
-		INT		j;
-		PUCHAR	macptr;
-
-		macptr = mac_addr;
-
-		for (j=0; j<MAC_ADDR_LEN; j++)
-		{
-			AtoH(macptr, &pAd->PermanentAddress[j], 1);
-			macptr=macptr+3;
-		}
-
-		DBGPRINT(RT_DEBUG_TRACE, ("Initialize MAC Address from module parameter \n"));
-	}
-
-
-	{
-#if 0
-		USHORT  Addr01,Addr23,Addr45 ;
-
-		Addr01=RTMP_EEPROM_READ16(pAd, 0x04);
-		Addr23=RTMP_EEPROM_READ16(pAd, 0x06);
-		Addr45=RTMP_EEPROM_READ16(pAd, 0x08);
-
-		pAd->PermanentAddress[0] = (UCHAR)(Addr01 & 0xff);
-		pAd->PermanentAddress[1] = (UCHAR)(Addr01 >> 8);
-		pAd->PermanentAddress[2] = (UCHAR)(Addr23 & 0xff);
-		pAd->PermanentAddress[3] = (UCHAR)(Addr23 >> 8);
-		pAd->PermanentAddress[4] = (UCHAR)(Addr45 & 0xff);
-		pAd->PermanentAddress[5] = (UCHAR)(Addr45 >> 8);
-#endif
-		//more conveninet to test mbssid, so ap's bssid &0xf1
-		if (pAd->PermanentAddress[0] == 0xff)
-			pAd->PermanentAddress[0] = RandomByte(pAd)&0xf8;
-
-		//if (pAd->PermanentAddress[5] == 0xff)
-		//	pAd->PermanentAddress[5] = RandomByte(pAd)&0xf8;
-
-		DBGPRINT_RAW(RT_DEBUG_TRACE,("E2PROM MAC: =%02x:%02x:%02x:%02x:%02x:%02x\n",
-			pAd->PermanentAddress[0], pAd->PermanentAddress[1],
-			pAd->PermanentAddress[2], pAd->PermanentAddress[3],
-			pAd->PermanentAddress[4], pAd->PermanentAddress[5]));
-		if (pAd->bLocalAdminMAC == FALSE)
-		{
-			MAC_DW0_STRUC csr2;
-			MAC_DW1_STRUC csr3;
-			COPY_MAC_ADDR(pAd->CurrentAddress, pAd->PermanentAddress);
-			csr2.field.Byte0 = pAd->CurrentAddress[0];
-			csr2.field.Byte1 = pAd->CurrentAddress[1];
-			csr2.field.Byte2 = pAd->CurrentAddress[2];
-			csr2.field.Byte3 = pAd->CurrentAddress[3];
-			RTMP_IO_WRITE32(pAd, MAC_ADDR_DW0, csr2.word);
-			csr3.word = 0;
-			csr3.field.Byte4 = pAd->CurrentAddress[4];
-			csr3.field.Byte5 = pAd->CurrentAddress[5];
-			csr3.field.U2MeMask = 0xff;
-			RTMP_IO_WRITE32(pAd, MAC_ADDR_DW1, csr3.word);
-			DBGPRINT_RAW(RT_DEBUG_TRACE,("E2PROM MAC: =%02x:%02x:%02x:%02x:%02x:%02x\n",
-				pAd->PermanentAddress[0], pAd->PermanentAddress[1],
-				pAd->PermanentAddress[2], pAd->PermanentAddress[3],
-				pAd->PermanentAddress[4], pAd->PermanentAddress[5]));
-		}
-	}
-
-	// if not return early. cause fail at emulation.
-	// Init the channel number for TX channel power
-	RTMPReadChannelPwr(pAd);
-
-	// if E2PROM version mismatch with driver's expectation, then skip
-	// all subsequent E2RPOM retieval and set a system error bit to notify GUI
-	RT28xx_EEPROM_READ16(pAd, EEPROM_VERSION_OFFSET, Version.word);
-	pAd->EepromVersion = Version.field.Version + Version.field.FaeReleaseNumber * 256;
-	DBGPRINT(RT_DEBUG_TRACE, ("E2PROM: Version = %d, FAE release #%d\n", Version.field.Version, Version.field.FaeReleaseNumber));
-
-	if (Version.field.Version > VALID_EEPROM_VERSION)
-	{
-		DBGPRINT_ERR(("E2PROM: WRONG VERSION 0x%x, should be %d\n",Version.field.Version, VALID_EEPROM_VERSION));
-		/*pAd->SystemErrorBitmap |= 0x00000001;
-
-		// hard-code default value when no proper E2PROM installed
-		pAd->bAutoTxAgcA = FALSE;
-		pAd->bAutoTxAgcG = FALSE;
-
-		// Default the channel power
-		for (i = 0; i < MAX_NUM_OF_CHANNELS; i++)
-			pAd->TxPower[i].Power = DEFAULT_RF_TX_POWER;
-
-		// Default the channel power
-		for (i = 0; i < MAX_NUM_OF_11JCHANNELS; i++)
-			pAd->TxPower11J[i].Power = DEFAULT_RF_TX_POWER;
-
-		for(i = 0; i < NUM_EEPROM_BBP_PARMS; i++)
-			pAd->EEPROMDefaultValue[i] = 0xffff;
-		return;  */
-	}
-
-	// Read BBP default value from EEPROM and store to array(EEPROMDefaultValue) in pAd
-	RT28xx_EEPROM_READ16(pAd, EEPROM_NIC1_OFFSET, value);
-	pAd->EEPROMDefaultValue[0] = value;
-
-	RT28xx_EEPROM_READ16(pAd, EEPROM_NIC2_OFFSET, value);
-	pAd->EEPROMDefaultValue[1] = value;
-
-	RT28xx_EEPROM_READ16(pAd, 0x38, value);	// Country Region
-	pAd->EEPROMDefaultValue[2] = value;
-
-	for(i = 0; i < 8; i++)
-	{
-		RT28xx_EEPROM_READ16(pAd, EEPROM_BBP_BASE_OFFSET + i*2, value);
-		pAd->EEPROMDefaultValue[i+3] = value;
-	}
-
-	// We have to parse NIC configuration 0 at here.
-	// If TSSI did not have preloaded value, it should reset the TxAutoAgc to false
-	// Therefore, we have to read TxAutoAgc control beforehand.
-	// Read Tx AGC control bit
-	Antenna.word = pAd->EEPROMDefaultValue[0];
-	if (Antenna.word == 0xFFFF)
-	{
-		Antenna.word = 0;
-		Antenna.field.RfIcType = RFIC_2820;
-		Antenna.field.TxPath = 1;
-		Antenna.field.RxPath = 2;
-		DBGPRINT(RT_DEBUG_WARN, ("E2PROM error, hard code as 0x%04x\n", Antenna.word));
-	}
-
-	// Choose the desired Tx&Rx stream.
-	if ((pAd->CommonCfg.TxStream == 0) || (pAd->CommonCfg.TxStream > Antenna.field.TxPath))
-		pAd->CommonCfg.TxStream = Antenna.field.TxPath;
-
-	if ((pAd->CommonCfg.RxStream == 0) || (pAd->CommonCfg.RxStream > Antenna.field.RxPath))
-	{
-		pAd->CommonCfg.RxStream = Antenna.field.RxPath;
-
-		if ((pAd->MACVersion < RALINK_2883_VERSION) &&
-			(pAd->CommonCfg.RxStream > 2))
-		{
-			// only 2 Rx streams for RT2860 series
-			pAd->CommonCfg.RxStream = 2;
-		}
-	}
-
-	// 3*3
-	// read value from EEPROM and set them to CSR174 ~ 177 in chain0 ~ chain2
-	// yet implement
-	for(i=0; i<3; i++)
-	{
-	}
-
-	NicConfig2.word = pAd->EEPROMDefaultValue[1];
-
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		NicConfig2.word = 0;
-		if ((NicConfig2.word & 0x00ff) == 0xff)
-		{
-			NicConfig2.word &= 0xff00;
-		}
-
-		if ((NicConfig2.word >> 8) == 0xff)
-		{
-			NicConfig2.word &= 0x00ff;
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	if (NicConfig2.field.DynamicTxAgcControl == 1)
-		pAd->bAutoTxAgcA = pAd->bAutoTxAgcG = TRUE;
-	else
-		pAd->bAutoTxAgcA = pAd->bAutoTxAgcG = FALSE;
-
-	DBGPRINT_RAW(RT_DEBUG_TRACE, ("NICReadEEPROMParameters: RxPath = %d, TxPath = %d\n", Antenna.field.RxPath, Antenna.field.TxPath));
-
-	// Save the antenna for future use
-	pAd->Antenna.word = Antenna.word;
-
-	//
-	// Reset PhyMode if we don't support 802.11a
-	// Only RFIC_2850 & RFIC_2750 support 802.11a
-	//
-	if ((Antenna.field.RfIcType != RFIC_2850) && (Antenna.field.RfIcType != RFIC_2750))
-	{
-		if ((pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED) ||
-			(pAd->CommonCfg.PhyMode == PHY_11A))
-			pAd->CommonCfg.PhyMode = PHY_11BG_MIXED;
-#ifdef DOT11_N_SUPPORT
-		else if ((pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED)	||
-				 (pAd->CommonCfg.PhyMode == PHY_11AN_MIXED) 	||
-				 (pAd->CommonCfg.PhyMode == PHY_11AGN_MIXED) 	||
-				 (pAd->CommonCfg.PhyMode == PHY_11N_5G))
-			pAd->CommonCfg.PhyMode = PHY_11BGN_MIXED;
-#endif // DOT11_N_SUPPORT //
-	}
-
-	// Read TSSI reference and TSSI boundary for temperature compensation. This is ugly
-	// 0. 11b/g
-	{
-		/* these are tempature reference value (0x00 ~ 0xFE)
-		   ex: 0x00 0x15 0x25 0x45 0x88 0xA0 0xB5 0xD0 0xF0
-		   TssiPlusBoundaryG [4] [3] [2] [1] [0] (smaller) +
-		   TssiMinusBoundaryG[0] [1] [2] [3] [4] (larger) */
-		RT28xx_EEPROM_READ16(pAd, 0x6E, Power.word);
-		pAd->TssiMinusBoundaryG[4] = Power.field.Byte0;
-		pAd->TssiMinusBoundaryG[3] = Power.field.Byte1;
-		RT28xx_EEPROM_READ16(pAd, 0x70, Power.word);
-		pAd->TssiMinusBoundaryG[2] = Power.field.Byte0;
-		pAd->TssiMinusBoundaryG[1] = Power.field.Byte1;
-		RT28xx_EEPROM_READ16(pAd, 0x72, Power.word);
-		pAd->TssiRefG   = Power.field.Byte0; /* reference value [0] */
-		pAd->TssiPlusBoundaryG[1] = Power.field.Byte1;
-		RT28xx_EEPROM_READ16(pAd, 0x74, Power.word);
-		pAd->TssiPlusBoundaryG[2] = Power.field.Byte0;
-		pAd->TssiPlusBoundaryG[3] = Power.field.Byte1;
-		RT28xx_EEPROM_READ16(pAd, 0x76, Power.word);
-		pAd->TssiPlusBoundaryG[4] = Power.field.Byte0;
-		pAd->TxAgcStepG = Power.field.Byte1;
-		pAd->TxAgcCompensateG = 0;
-		pAd->TssiMinusBoundaryG[0] = pAd->TssiRefG;
-		pAd->TssiPlusBoundaryG[0]  = pAd->TssiRefG;
-
-		// Disable TxAgc if the based value is not right
-		if (pAd->TssiRefG == 0xff)
-			pAd->bAutoTxAgcG = FALSE;
-
-		DBGPRINT(RT_DEBUG_TRACE,("E2PROM: G Tssi[-4 .. +4] = %d %d %d %d - %d -%d %d %d %d, step=%d, tuning=%d\n",
-			pAd->TssiMinusBoundaryG[4], pAd->TssiMinusBoundaryG[3], pAd->TssiMinusBoundaryG[2], pAd->TssiMinusBoundaryG[1],
-			pAd->TssiRefG,
-			pAd->TssiPlusBoundaryG[1], pAd->TssiPlusBoundaryG[2], pAd->TssiPlusBoundaryG[3], pAd->TssiPlusBoundaryG[4],
-			pAd->TxAgcStepG, pAd->bAutoTxAgcG));
-	}
-	// 1. 11a
-	{
-		RT28xx_EEPROM_READ16(pAd, 0xD4, Power.word);
-		pAd->TssiMinusBoundaryA[4] = Power.field.Byte0;
-		pAd->TssiMinusBoundaryA[3] = Power.field.Byte1;
-		RT28xx_EEPROM_READ16(pAd, 0xD6, Power.word);
-		pAd->TssiMinusBoundaryA[2] = Power.field.Byte0;
-		pAd->TssiMinusBoundaryA[1] = Power.field.Byte1;
-		RT28xx_EEPROM_READ16(pAd, 0xD8, Power.word);
-		pAd->TssiRefA   = Power.field.Byte0;
-		pAd->TssiPlusBoundaryA[1] = Power.field.Byte1;
-		RT28xx_EEPROM_READ16(pAd, 0xDA, Power.word);
-		pAd->TssiPlusBoundaryA[2] = Power.field.Byte0;
-		pAd->TssiPlusBoundaryA[3] = Power.field.Byte1;
-		RT28xx_EEPROM_READ16(pAd, 0xDC, Power.word);
-		pAd->TssiPlusBoundaryA[4] = Power.field.Byte0;
-		pAd->TxAgcStepA = Power.field.Byte1;
-		pAd->TxAgcCompensateA = 0;
-		pAd->TssiMinusBoundaryA[0] = pAd->TssiRefA;
-		pAd->TssiPlusBoundaryA[0]  = pAd->TssiRefA;
-
-		// Disable TxAgc if the based value is not right
-		if (pAd->TssiRefA == 0xff)
-			pAd->bAutoTxAgcA = FALSE;
-
-		DBGPRINT(RT_DEBUG_TRACE,("E2PROM: A Tssi[-4 .. +4] = %d %d %d %d - %d -%d %d %d %d, step=%d, tuning=%d\n",
-			pAd->TssiMinusBoundaryA[4], pAd->TssiMinusBoundaryA[3], pAd->TssiMinusBoundaryA[2], pAd->TssiMinusBoundaryA[1],
-			pAd->TssiRefA,
-			pAd->TssiPlusBoundaryA[1], pAd->TssiPlusBoundaryA[2], pAd->TssiPlusBoundaryA[3], pAd->TssiPlusBoundaryA[4],
-			pAd->TxAgcStepA, pAd->bAutoTxAgcA));
-	}
-	pAd->BbpRssiToDbmDelta = 0x0;
-
-	// Read frequency offset setting for RF
-	RT28xx_EEPROM_READ16(pAd, EEPROM_FREQ_OFFSET, value);
-	if ((value & 0x00FF) != 0x00FF)
-		pAd->RfFreqOffset = (ULONG) (value & 0x00FF);
-	else
-		pAd->RfFreqOffset = 0;
-	DBGPRINT(RT_DEBUG_TRACE, ("E2PROM: RF FreqOffset=0x%lx \n", pAd->RfFreqOffset));
-
-	//CountryRegion byte offset (38h)
-	value = pAd->EEPROMDefaultValue[2] >> 8;		// 2.4G band
-	value2 = pAd->EEPROMDefaultValue[2] & 0x00FF;	// 5G band
-
-	if ((value <= REGION_MAXIMUM_BG_BAND) && (value2 <= REGION_MAXIMUM_A_BAND))
-	{
-		pAd->CommonCfg.CountryRegion = ((UCHAR) value) | 0x80;
-		pAd->CommonCfg.CountryRegionForABand = ((UCHAR) value2) | 0x80;
-		TmpPhy = pAd->CommonCfg.PhyMode;
-		pAd->CommonCfg.PhyMode = 0xff;
-		RTMPSetPhyMode(pAd, TmpPhy);
-#ifdef DOT11_N_SUPPORT
-		SetCommonHT(pAd);
-#endif // DOT11_N_SUPPORT //
-	}
-
-	//
-	// Get RSSI Offset on EEPROM 0x9Ah & 0x9Ch.
-	// The valid value are (-10 ~ 10)
-	//
-	RT28xx_EEPROM_READ16(pAd, EEPROM_RSSI_BG_OFFSET, value);
-	pAd->BGRssiOffset0 = value & 0x00ff;
-	pAd->BGRssiOffset1 = (value >> 8);
-	RT28xx_EEPROM_READ16(pAd, EEPROM_RSSI_BG_OFFSET+2, value);
-	pAd->BGRssiOffset2 = value & 0x00ff;
-	pAd->ALNAGain1 = (value >> 8);
-	RT28xx_EEPROM_READ16(pAd, EEPROM_LNA_OFFSET, value);
-	pAd->BLNAGain = value & 0x00ff;
-	pAd->ALNAGain0 = (value >> 8);
-
-	// Validate 11b/g RSSI_0 offset.
-	if ((pAd->BGRssiOffset0 < -10) || (pAd->BGRssiOffset0 > 10))
-		pAd->BGRssiOffset0 = 0;
-
-	// Validate 11b/g RSSI_1 offset.
-	if ((pAd->BGRssiOffset1 < -10) || (pAd->BGRssiOffset1 > 10))
-		pAd->BGRssiOffset1 = 0;
-
-	// Validate 11b/g RSSI_2 offset.
-	if ((pAd->BGRssiOffset2 < -10) || (pAd->BGRssiOffset2 > 10))
-		pAd->BGRssiOffset2 = 0;
-
-	RT28xx_EEPROM_READ16(pAd, EEPROM_RSSI_A_OFFSET, value);
-	pAd->ARssiOffset0 = value & 0x00ff;
-	pAd->ARssiOffset1 = (value >> 8);
-	RT28xx_EEPROM_READ16(pAd, (EEPROM_RSSI_A_OFFSET+2), value);
-	pAd->ARssiOffset2 = value & 0x00ff;
-	pAd->ALNAGain2 = (value >> 8);
-
-	if (((UCHAR)pAd->ALNAGain1 == 0xFF) || (pAd->ALNAGain1 == 0x00))
-		pAd->ALNAGain1 = pAd->ALNAGain0;
-	if (((UCHAR)pAd->ALNAGain2 == 0xFF) || (pAd->ALNAGain2 == 0x00))
-		pAd->ALNAGain2 = pAd->ALNAGain0;
-
-	// Validate 11a RSSI_0 offset.
-	if ((pAd->ARssiOffset0 < -10) || (pAd->ARssiOffset0 > 10))
-		pAd->ARssiOffset0 = 0;
-
-	// Validate 11a RSSI_1 offset.
-	if ((pAd->ARssiOffset1 < -10) || (pAd->ARssiOffset1 > 10))
-		pAd->ARssiOffset1 = 0;
-
-	//Validate 11a RSSI_2 offset.
-	if ((pAd->ARssiOffset2 < -10) || (pAd->ARssiOffset2 > 10))
-		pAd->ARssiOffset2 = 0;
-
-	//
-	// Get LED Setting.
-	//
-	RT28xx_EEPROM_READ16(pAd, 0x3a, value);
-	pAd->LedCntl.word = (value&0xff00) >> 8;
-	RT28xx_EEPROM_READ16(pAd, EEPROM_LED1_OFFSET, value);
-	pAd->Led1 = value;
-	RT28xx_EEPROM_READ16(pAd, EEPROM_LED2_OFFSET, value);
-	pAd->Led2 = value;
-	RT28xx_EEPROM_READ16(pAd, EEPROM_LED3_OFFSET, value);
-	pAd->Led3 = value;
-
-	RTMPReadTxPwrPerRate(pAd);
-
-#ifdef SINGLE_SKU
-	//pAd->CommonCfg.DefineMaxTxPwr = RTMP_EEPROM_READ16(pAd, EEPROM_DEFINE_MAX_TXPWR);
-	RT28xx_EEPROM_READ16(pAd, EEPROM_DEFINE_MAX_TXPWR, pAd->CommonCfg.DefineMaxTxPwr);
-#endif // SINGLE_SKU //
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<-- NICReadEEPROMParameters\n"));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Set default value from EEPROM
-
-	Arguments:
-		Adapter						Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	NICInitAsicFromEEPROM(
-	IN	PRTMP_ADAPTER	pAd)
-{
-#ifdef CONFIG_STA_SUPPORT
-	UINT32					data = 0;
-	UCHAR	BBPR1 = 0;
-#endif // CONFIG_STA_SUPPORT //
-	USHORT					i;
-	EEPROM_ANTENNA_STRUC	Antenna;
-	EEPROM_NIC_CONFIG2_STRUC    NicConfig2;
-	UCHAR	BBPR3 = 0;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("--> NICInitAsicFromEEPROM\n"));
-	for(i = 3; i < NUM_EEPROM_BBP_PARMS; i++)
-	{
-		UCHAR BbpRegIdx, BbpValue;
-
-		if ((pAd->EEPROMDefaultValue[i] != 0xFFFF) && (pAd->EEPROMDefaultValue[i] != 0))
-		{
-			BbpRegIdx = (UCHAR)(pAd->EEPROMDefaultValue[i] >> 8);
-			BbpValue  = (UCHAR)(pAd->EEPROMDefaultValue[i] & 0xff);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BbpRegIdx, BbpValue);
-		}
-	}
-
-	Antenna.word = pAd->Antenna.word;
-	pAd->Mlme.RealRxPath = (UCHAR) Antenna.field.RxPath;
-	pAd->RfIcType = (UCHAR) Antenna.field.RfIcType;
-
-	NicConfig2.word = pAd->EEPROMDefaultValue[1];
-
-
-	// Save the antenna for future use
-	pAd->NicConfig2.word = NicConfig2.word;
-
-	//
-	// Send LED Setting to MCU.
-	//
-	if (pAd->LedCntl.word == 0xFF)
-	{
-		pAd->LedCntl.word = 0x01;
-		pAd->Led1 = 0x5555;
-		pAd->Led2 = 0x2221;
-
-#ifdef RT2870
-		pAd->Led3 = 0x5627;
-#endif // RT2870 //
-	}
-
-	AsicSendCommandToMcu(pAd, 0x52, 0xff, (UCHAR)pAd->Led1, (UCHAR)(pAd->Led1 >> 8));
-	AsicSendCommandToMcu(pAd, 0x53, 0xff, (UCHAR)pAd->Led2, (UCHAR)(pAd->Led2 >> 8));
-	AsicSendCommandToMcu(pAd, 0x54, 0xff, (UCHAR)pAd->Led3, (UCHAR)(pAd->Led3 >> 8));
-    pAd->LedIndicatorStregth = 0xFF;
-    RTMPSetSignalLED(pAd, -100);	// Force signal strength Led to be turned off, before link up
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// Read Hardware controlled Radio state enable bit
-		if (NicConfig2.field.HardwareRadioControl == 1)
-		{
-			pAd->StaCfg.bHardwareRadio = TRUE;
-
-			// Read GPIO pin2 as Hardware controlled radio state
-			RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &data);
-			if ((data & 0x04) == 0)
-			{
-				pAd->StaCfg.bHwRadio = FALSE;
-				pAd->StaCfg.bRadio = FALSE;
-//				RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x00001818);
-				RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
-			}
-		}
-		else
-			pAd->StaCfg.bHardwareRadio = FALSE;
-
-		if (pAd->StaCfg.bRadio == FALSE)
-		{
-			RTMPSetLED(pAd, LED_RADIO_OFF);
-		}
-		else
-		{
-			RTMPSetLED(pAd, LED_RADIO_ON);
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	// Turn off patching for cardbus controller
-	if (NicConfig2.field.CardbusAcceleration == 1)
-	{
-//		pAd->bTest1 = TRUE;
-	}
-
-	if (NicConfig2.field.DynamicTxAgcControl == 1)
-		pAd->bAutoTxAgcA = pAd->bAutoTxAgcG = TRUE;
-	else
-		pAd->bAutoTxAgcA = pAd->bAutoTxAgcG = FALSE;
-	//
-	// Since BBP has been progamed, to make sure BBP setting will be
-	// upate inside of AsicAntennaSelect, so reset to UNKNOWN_BAND!!
-	//
-	pAd->CommonCfg.BandState = UNKNOWN_BAND;
-
-	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3);
-	BBPR3 &= (~0x18);
-	if(pAd->Antenna.field.RxPath == 3)
-	{
-		BBPR3 |= (0x10);
-	}
-	else if(pAd->Antenna.field.RxPath == 2)
-	{
-		BBPR3 |= (0x8);
-	}
-	else if(pAd->Antenna.field.RxPath == 1)
-	{
-		BBPR3 |= (0x0);
-	}
-	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// Handle the difference when 1T
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BBPR1);
-		if(pAd->Antenna.field.TxPath == 1)
-		{
-		BBPR1 &= (~0x18);
-		}
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BBPR1);
-
-		DBGPRINT(RT_DEBUG_TRACE, ("Use Hw Radio Control Pin=%d; if used Pin=%d;\n", pAd->CommonCfg.bHardwareRadio, pAd->CommonCfg.bHardwareRadio));
-	}
-#endif // CONFIG_STA_SUPPORT //
-	DBGPRINT(RT_DEBUG_TRACE, ("TxPath = %d, RxPath = %d, RFIC=%d, Polar+LED mode=%x\n", pAd->Antenna.field.TxPath, pAd->Antenna.field.RxPath, pAd->RfIcType, pAd->LedCntl.word));
-	DBGPRINT(RT_DEBUG_TRACE, ("<-- NICInitAsicFromEEPROM\n"));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Initialize NIC hardware
-
-	Arguments:
-		Adapter						Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-NDIS_STATUS	NICInitializeAdapter(
-	IN	PRTMP_ADAPTER	pAd,
-	IN   BOOLEAN    bHardReset)
-{
-	NDIS_STATUS     Status = NDIS_STATUS_SUCCESS;
-	WPDMA_GLO_CFG_STRUC	GloCfg;
-//	INT_MASK_CSR_STRUC		IntMask;
-	ULONG	i =0, j=0;
-	AC_TXOP_CSR0_STRUC	csr0;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("--> NICInitializeAdapter\n"));
-
-	// 3. Set DMA global configuration except TX_DMA_EN and RX_DMA_EN bits:
-retry:
-	i = 0;
-	do
-	{
-		RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &GloCfg.word);
-		if ((GloCfg.field.TxDMABusy == 0)  && (GloCfg.field.RxDMABusy == 0))
-			break;
-
-		RTMPusecDelay(1000);
-		i++;
-	}while ( i<100);
-	DBGPRINT(RT_DEBUG_TRACE, ("<== DMA offset 0x208 = 0x%x\n", GloCfg.word));
-	GloCfg.word &= 0xff0;
-	GloCfg.field.EnTXWriteBackDDONE =1;
-	RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, GloCfg.word);
-
-	// Record HW Beacon offset
-	pAd->BeaconOffset[0] = HW_BEACON_BASE0;
-	pAd->BeaconOffset[1] = HW_BEACON_BASE1;
-	pAd->BeaconOffset[2] = HW_BEACON_BASE2;
-	pAd->BeaconOffset[3] = HW_BEACON_BASE3;
-	pAd->BeaconOffset[4] = HW_BEACON_BASE4;
-	pAd->BeaconOffset[5] = HW_BEACON_BASE5;
-	pAd->BeaconOffset[6] = HW_BEACON_BASE6;
-	pAd->BeaconOffset[7] = HW_BEACON_BASE7;
-
-	//
-	// write all shared Ring's base address into ASIC
-	//
-
-	// asic simulation sequence put this ahead before loading firmware.
-	// pbf hardware reset
-
-	// Initialze ASIC for TX & Rx operation
-	if (NICInitializeAsic(pAd , bHardReset) != NDIS_STATUS_SUCCESS)
-	{
-		if (j++ == 0)
-		{
-			NICLoadFirmware(pAd);
-			goto retry;
-		}
-		return NDIS_STATUS_FAILURE;
-	}
-
-
-
-
-	// WMM parameter
-	csr0.word = 0;
-	RTMP_IO_WRITE32(pAd, WMM_TXOP0_CFG, csr0.word);
-	if (pAd->CommonCfg.PhyMode == PHY_11B)
-	{
-		csr0.field.Ac0Txop = 192;	// AC_VI: 192*32us ~= 6ms
-		csr0.field.Ac1Txop = 96;	// AC_VO: 96*32us  ~= 3ms
-	}
-	else
-	{
-		csr0.field.Ac0Txop = 96;	// AC_VI: 96*32us ~= 3ms
-		csr0.field.Ac1Txop = 48;	// AC_VO: 48*32us ~= 1.5ms
-	}
-	RTMP_IO_WRITE32(pAd, WMM_TXOP1_CFG, csr0.word);
-
-
-
-
-	// reset action
-	// Load firmware
-	//  Status = NICLoadFirmware(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<-- NICInitializeAdapter\n"));
-	return Status;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Initialize ASIC
-
-	Arguments:
-		Adapter						Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-NDIS_STATUS	NICInitializeAsic(
-	IN	PRTMP_ADAPTER	pAd,
-	IN  BOOLEAN		bHardReset)
-{
-	ULONG			Index = 0;
-	UCHAR			R0 = 0xff;
-	UINT32			MacCsr12 = 0, Counter = 0;
-#ifdef RT2870
-	UINT32			MacCsr0 = 0;
-	NTSTATUS		Status;
-	UCHAR			Value = 0xff;
-#endif // RT2870 //
-	USHORT			KeyIdx;
-	INT				i,apidx;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("--> NICInitializeAsic\n"));
-
-
-#ifdef RT2870
-	//
-	// Make sure MAC gets ready after NICLoadFirmware().
-	//
-	Index = 0;
-
-	//To avoid hang-on issue when interface up in kernel 2.4,
-	//we use a local variable "MacCsr0" instead of using "pAd->MACVersion" directly.
-	do
-	{
-		RTMP_IO_READ32(pAd, MAC_CSR0, &MacCsr0);
-
-		if ((MacCsr0 != 0x00) && (MacCsr0 != 0xFFFFFFFF))
-			break;
-
-		RTMPusecDelay(10);
-	} while (Index++ < 100);
-
-	pAd->MACVersion = MacCsr0;
-	DBGPRINT(RT_DEBUG_TRACE, ("MAC_CSR0  [ Ver:Rev=0x%08x]\n", pAd->MACVersion));
-	// turn on bit13 (set to zero) after rt2860D. This is to solve high-current issue.
-	RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &MacCsr12);
-	MacCsr12 &= (~0x2000);
-	RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, MacCsr12);
-
-	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x3);
-	RTMP_IO_WRITE32(pAd, USB_DMA_CFG, 0x0);
-	Status = RTUSBVenderReset(pAd);
-
-	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x0);
-
-	// Initialize MAC register to default value
-	for(Index=0; Index<NUM_MAC_REG_PARMS; Index++)
-	{
-		RTMP_IO_WRITE32(pAd, (USHORT)MACRegTable[Index].Register, MACRegTable[Index].Value);
-	}
-
-	if(IS_RT3070(pAd))
-	{
-		// According to Frank Hsu (from Gary Tsao)
-		RTMP_IO_WRITE32(pAd, (USHORT)TX_SW_CFG0, 0x00000400);
-
-		// Initialize RT3070 serial MAC registers which is different from RT2870 serial
-		RTUSBWriteMACRegister(pAd, TX_SW_CFG1, 0);
-		RTUSBWriteMACRegister(pAd, TX_SW_CFG2, 0);
-	}
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		for (Index = 0; Index < NUM_STA_MAC_REG_PARMS; Index++)
-		{
-			RTMP_IO_WRITE32(pAd, (USHORT)STAMACRegTable[Index].Register, STAMACRegTable[Index].Value);
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-#endif // RT2870 //
-
-	//
-	// Before program BBP, we need to wait BBP/RF get wake up.
-	//
-	Index = 0;
-	do
-	{
-		RTMP_IO_READ32(pAd, MAC_STATUS_CFG, &MacCsr12);
-
-		if ((MacCsr12 & 0x03) == 0)	// if BB.RF is stable
-			break;
-
-		DBGPRINT(RT_DEBUG_TRACE, ("Check MAC_STATUS_CFG  = Busy = %x\n", MacCsr12));
-		RTMPusecDelay(1000);
-	} while (Index++ < 100);
-
-    // The commands to firmware should be after these commands, these commands will init firmware
-	// PCI and USB are not the same because PCI driver needs to wait for PCI bus ready
-	RTMP_IO_WRITE32(pAd, H2M_BBP_AGENT, 0);	// initialize BBP R/W access agent
-	RTMP_IO_WRITE32(pAd, H2M_MAILBOX_CSR, 0);
-	RTMPusecDelay(1000);
-
-	// Read BBP register, make sure BBP is up and running before write new data
-	Index = 0;
-	do
-	{
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R0, &R0);
-		DBGPRINT(RT_DEBUG_TRACE, ("BBP version = %x\n", R0));
-	} while ((++Index < 20) && ((R0 == 0xff) || (R0 == 0x00)));
-	//ASSERT(Index < 20); //this will cause BSOD on Check-build driver
-
-	if ((R0 == 0xff) || (R0 == 0x00))
-		return NDIS_STATUS_FAILURE;
-
-	// Initialize BBP register to default value
-	for (Index = 0; Index < NUM_BBP_REG_PARMS; Index++)
-	{
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBPRegTable[Index].Register, BBPRegTable[Index].Value);
-	}
-
-	// for rt2860E and after, init BBP_R84 with 0x19. This is for extension channel overlapping IOT.
-	if ((pAd->MACVersion&0xffff) != 0x0101)
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x19);
-
-#ifdef RT2870
-	//write RT3070 BBP wchich different with 2870 after write RT2870 BBP
-	if (IS_RT3070(pAd))
-	{
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x0a);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x99);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R105, 0x05);
-	}
-#endif // RT2870 //
-
-	if (pAd->MACVersion == 0x28600100)
-	{
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x16);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x12);
-    }
-
-	if (pAd->MACVersion >= RALINK_2880E_VERSION && pAd->MACVersion < RALINK_3070_VERSION) // 3*3
-	{
-		// enlarge MAX_LEN_CFG
-		UINT32 csr;
-		RTMP_IO_READ32(pAd, MAX_LEN_CFG, &csr);
-		csr &= 0xFFF;
-		csr |= 0x2000;
-		RTMP_IO_WRITE32(pAd, MAX_LEN_CFG, csr);
-	}
-
-#ifdef RT2870
-{
-	UCHAR	MAC_Value[]={0xff,0xff,0xff,0xff,0xff,0xff,0xff,0,0};
-
-	//Initialize WCID table
-	Value = 0xff;
-	for(Index =0 ;Index < 254;Index++)
-	{
-		RTUSBMultiWrite(pAd, (USHORT)(MAC_WCID_BASE + Index * 8), MAC_Value, 8);
-	}
-}
-#endif // RT2870 //
-
-	// Add radio off control
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if (pAd->StaCfg.bRadio == FALSE)
-		{
-//			RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x00001818);
-			RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
-			DBGPRINT(RT_DEBUG_TRACE, ("Set Radio Off\n"));
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	// Clear raw counters
-	RTMP_IO_READ32(pAd, RX_STA_CNT0, &Counter);
-	RTMP_IO_READ32(pAd, RX_STA_CNT1, &Counter);
-	RTMP_IO_READ32(pAd, RX_STA_CNT2, &Counter);
-	RTMP_IO_READ32(pAd, TX_STA_CNT0, &Counter);
-	RTMP_IO_READ32(pAd, TX_STA_CNT1, &Counter);
-	RTMP_IO_READ32(pAd, TX_STA_CNT2, &Counter);
-
-	// ASIC will keep garbage value after boot
-	// Clear all seared key table when initial
-	// This routine can be ignored in radio-ON/OFF operation.
-	if (bHardReset)
-	{
-		for (KeyIdx = 0; KeyIdx < 4; KeyIdx++)
-		{
-			RTMP_IO_WRITE32(pAd, SHARED_KEY_MODE_BASE + 4*KeyIdx, 0);
-		}
-
-		// Clear all pairwise key table when initial
-		for (KeyIdx = 0; KeyIdx < 256; KeyIdx++)
-		{
-			RTMP_IO_WRITE32(pAd, MAC_WCID_ATTRIBUTE_BASE + (KeyIdx * HW_WCID_ATTRI_SIZE), 1);
-		}
-	}
-
-	// assert HOST ready bit
-//  RTMP_IO_WRITE32(pAd, MAC_CSR1, 0x0); // 2004-09-14 asked by Mark
-//  RTMP_IO_WRITE32(pAd, MAC_CSR1, 0x4);
-
-	// It isn't necessary to clear this space when not hard reset.
-	if (bHardReset == TRUE)
-	{
-		// clear all on-chip BEACON frame space
-		for (apidx = 0; apidx < HW_BEACON_MAX_COUNT; apidx++)
-		{
-			for (i = 0; i < HW_BEACON_OFFSET>>2; i+=4)
-				RTMP_IO_WRITE32(pAd, pAd->BeaconOffset[apidx] + i, 0x00);
-		}
-	}
-#ifdef RT2870
-	AsicDisableSync(pAd);
-	// Clear raw counters
-	RTMP_IO_READ32(pAd, RX_STA_CNT0, &Counter);
-	RTMP_IO_READ32(pAd, RX_STA_CNT1, &Counter);
-	RTMP_IO_READ32(pAd, RX_STA_CNT2, &Counter);
-	RTMP_IO_READ32(pAd, TX_STA_CNT0, &Counter);
-	RTMP_IO_READ32(pAd, TX_STA_CNT1, &Counter);
-	RTMP_IO_READ32(pAd, TX_STA_CNT2, &Counter);
-	// Default PCI clock cycle per ms is different as default setting, which is based on PCI.
-	RTMP_IO_READ32(pAd, USB_CYC_CFG, &Counter);
-	Counter&=0xffffff00;
-	Counter|=0x000001e;
-	RTMP_IO_WRITE32(pAd, USB_CYC_CFG, Counter);
-#endif // RT2870 //
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// for rt2860E and after, init TXOP_CTRL_CFG with 0x583f. This is for extension channel overlapping IOT.
-		if ((pAd->MACVersion&0xffff) != 0x0101)
-			RTMP_IO_WRITE32(pAd, TXOP_CTRL_CFG, 0x583f);
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<-- NICInitializeAsic\n"));
-	return NDIS_STATUS_SUCCESS;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Reset NIC Asics
-
-	Arguments:
-		Adapter						Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-
-	Note:
-		Reset NIC to initial state AS IS system boot up time.
-
-	========================================================================
-*/
-VOID	NICIssueReset(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	UINT32	Value = 0;
-	DBGPRINT(RT_DEBUG_TRACE, ("--> NICIssueReset\n"));
-
-	// Abort Tx, prevent ASIC from writing to Host memory
-	//RTMP_IO_WRITE32(pAd, TX_CNTL_CSR, 0x001f0000);
-
-	// Disable Rx, register value supposed will remain after reset
-	RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-	Value &= (0xfffffff3);
-	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-	// Issue reset and clear from reset state
-	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x03); // 2004-09-17 change from 0x01
-	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x00);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<-- NICIssueReset\n"));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Check ASIC registers and find any reason the system might hang
-
-	Arguments:
-		Adapter						Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	========================================================================
-*/
-BOOLEAN	NICCheckForHang(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	return (FALSE);
-}
-
-VOID NICUpdateFifoStaCounters(
-	IN PRTMP_ADAPTER pAd)
-{
-	TX_STA_FIFO_STRUC	StaFifo;
-	MAC_TABLE_ENTRY		*pEntry;
-	UCHAR				i = 0;
-	UCHAR			pid = 0, wcid = 0;
-	CHAR				reTry;
-	UCHAR				succMCS;
-
-#ifdef RALINK_ATE
-	/* Nothing to do in ATE mode */
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-		do
-		{
-			RTMP_IO_READ32(pAd, TX_STA_FIFO, &StaFifo.word);
-
-			if (StaFifo.field.bValid == 0)
-				break;
-
-			wcid = (UCHAR)StaFifo.field.wcid;
-
-
-		/* ignore NoACK and MGMT frame use 0xFF as WCID */
-			if ((StaFifo.field.TxAckRequired == 0) || (wcid >= MAX_LEN_OF_MAC_TABLE))
-			{
-				i++;
-				continue;
-			}
-
-			/* PID store Tx MCS Rate */
-			pid = (UCHAR)StaFifo.field.PidType;
-
-			pEntry = &pAd->MacTab.Content[wcid];
-
-			pEntry->DebugFIFOCount++;
-
-#ifdef DOT11_N_SUPPORT
-			if (StaFifo.field.TxBF) // 3*3
-				pEntry->TxBFCount++;
-#endif // DOT11_N_SUPPORT //
-
-#ifdef UAPSD_AP_SUPPORT
-			UAPSD_SP_AUE_Handle(pAd, pEntry, StaFifo.field.TxSuccess);
-#endif // UAPSD_AP_SUPPORT //
-
-			if (!StaFifo.field.TxSuccess)
-			{
-				pEntry->FIFOCount++;
-				pEntry->OneSecTxFailCount++;
-
-				if (pEntry->FIFOCount >= 1)
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("#"));
-#if 0
-					SendRefreshBAR(pAd, pEntry);
-					pEntry->NoBADataCountDown = 64;
-#else
-#ifdef DOT11_N_SUPPORT
-					pEntry->NoBADataCountDown = 64;
-#endif // DOT11_N_SUPPORT //
-
-					if(pEntry->PsMode == PWR_ACTIVE)
-					{
-#ifdef DOT11_N_SUPPORT
-						int tid;
-						for (tid=0; tid<NUM_OF_TID; tid++)
-						{
-							BAOriSessionTearDown(pAd, pEntry->Aid,  tid, FALSE, FALSE);
-						}
-#endif // DOT11_N_SUPPORT //
-
-						// Update the continuous transmission counter except PS mode
-						pEntry->ContinueTxFailCnt++;
-					}
-					else
-					{
-						// Clear the FIFOCount when sta in Power Save mode. Basically we assume
-						//     this tx error happened due to sta just go to sleep.
-						pEntry->FIFOCount = 0;
-						pEntry->ContinueTxFailCnt = 0;
-					}
-#endif
-					//pEntry->FIFOCount = 0;
-				}
-				//pEntry->bSendBAR = TRUE;
-			}
-			else
-			{
-#ifdef DOT11_N_SUPPORT
-				if ((pEntry->PsMode != PWR_SAVE) && (pEntry->NoBADataCountDown > 0))
-				{
-					pEntry->NoBADataCountDown--;
-					if (pEntry->NoBADataCountDown==0)
-					{
-						DBGPRINT(RT_DEBUG_TRACE, ("@\n"));
-					}
-				}
-#endif // DOT11_N_SUPPORT //
-				pEntry->FIFOCount = 0;
-				pEntry->OneSecTxNoRetryOkCount++;
-				// update NoDataIdleCount when sucessful send packet to STA.
-				pEntry->NoDataIdleCount = 0;
-				pEntry->ContinueTxFailCnt = 0;
-			}
-
-			succMCS = StaFifo.field.SuccessRate & 0x7F;
-
-			reTry = pid - succMCS;
-
-			if (StaFifo.field.TxSuccess)
-			{
-				pEntry->TXMCSExpected[pid]++;
-				if (pid == succMCS)
-				{
-					pEntry->TXMCSSuccessful[pid]++;
-				}
-				else
-				{
-					pEntry->TXMCSAutoFallBack[pid][succMCS]++;
-				}
-			}
-			else
-			{
-				pEntry->TXMCSFailed[pid]++;
-			}
-
-			if (reTry > 0)
-			{
-				if ((pid >= 12) && succMCS <=7)
-				{
-					reTry -= 4;
-				}
-				pEntry->OneSecTxRetryOkCount += reTry;
-			}
-
-			i++;
-			// ASIC store 16 stack
-		} while ( i < (2*TX_RING_SIZE) );
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Read statistical counters from hardware registers and record them
-		in software variables for later on query
-
-	Arguments:
-		pAd					Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	========================================================================
-*/
-VOID NICUpdateRawCounters(
-	IN PRTMP_ADAPTER pAd)
-{
-	UINT32	OldValue;
-	RX_STA_CNT0_STRUC	 RxStaCnt0;
-	RX_STA_CNT1_STRUC   RxStaCnt1;
-	RX_STA_CNT2_STRUC   RxStaCnt2;
-	TX_STA_CNT0_STRUC 	 TxStaCnt0;
-	TX_STA_CNT1_STRUC	 StaTx1;
-	TX_STA_CNT2_STRUC	 StaTx2;
-	TX_AGG_CNT_STRUC	TxAggCnt;
-	TX_AGG_CNT0_STRUC	TxAggCnt0;
-	TX_AGG_CNT1_STRUC	TxAggCnt1;
-	TX_AGG_CNT2_STRUC	TxAggCnt2;
-	TX_AGG_CNT3_STRUC	TxAggCnt3;
-	TX_AGG_CNT4_STRUC	TxAggCnt4;
-	TX_AGG_CNT5_STRUC	TxAggCnt5;
-	TX_AGG_CNT6_STRUC	TxAggCnt6;
-	TX_AGG_CNT7_STRUC	TxAggCnt7;
-
-
-	RTMP_IO_READ32(pAd, RX_STA_CNT0, &RxStaCnt0.word);
-	RTMP_IO_READ32(pAd, RX_STA_CNT2, &RxStaCnt2.word);
-
-	{
-		RTMP_IO_READ32(pAd, RX_STA_CNT1, &RxStaCnt1.word);
-	    // Update RX PLCP error counter
-	    pAd->PrivateInfo.PhyRxErrCnt += RxStaCnt1.field.PlcpErr;
-		// Update False CCA counter
-		pAd->RalinkCounters.OneSecFalseCCACnt += RxStaCnt1.field.FalseCca;
-	}
-
-	// Update FCS counters
-	OldValue= pAd->WlanCounters.FCSErrorCount.u.LowPart;
-	pAd->WlanCounters.FCSErrorCount.u.LowPart += (RxStaCnt0.field.CrcErr); // >> 7);
-	if (pAd->WlanCounters.FCSErrorCount.u.LowPart < OldValue)
-		pAd->WlanCounters.FCSErrorCount.u.HighPart++;
-
-	// Add FCS error count to private counters
-	pAd->RalinkCounters.OneSecRxFcsErrCnt += RxStaCnt0.field.CrcErr;
-	OldValue = pAd->RalinkCounters.RealFcsErrCount.u.LowPart;
-	pAd->RalinkCounters.RealFcsErrCount.u.LowPart += RxStaCnt0.field.CrcErr;
-	if (pAd->RalinkCounters.RealFcsErrCount.u.LowPart < OldValue)
-		pAd->RalinkCounters.RealFcsErrCount.u.HighPart++;
-
-	// Update Duplicate Rcv check
-	pAd->RalinkCounters.DuplicateRcv += RxStaCnt2.field.RxDupliCount;
-	pAd->WlanCounters.FrameDuplicateCount.u.LowPart += RxStaCnt2.field.RxDupliCount;
-	// Update RX Overflow counter
-	pAd->Counters8023.RxNoBuffer += (RxStaCnt2.field.RxFifoOverflowCount);
-
-	//pAd->RalinkCounters.RxCount = 0;
-#ifdef RT2870
-	if (pAd->RalinkCounters.RxCount != pAd->watchDogRxCnt)
-	{
-		pAd->watchDogRxCnt = pAd->RalinkCounters.RxCount;
-		pAd->watchDogRxOverFlowCnt = 0;
-	}
-	else
-	{
-		if (RxStaCnt2.field.RxFifoOverflowCount)
-			pAd->watchDogRxOverFlowCnt++;
-		else
-			pAd->watchDogRxOverFlowCnt = 0;
-	}
-#endif // RT2870 //
-
-
-	//if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED) ||
-	//	(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED) && (pAd->MacTab.Size != 1)))
-	if (!pAd->bUpdateBcnCntDone)
-	{
-	// Update BEACON sent count
-	RTMP_IO_READ32(pAd, TX_STA_CNT0, &TxStaCnt0.word);
-	RTMP_IO_READ32(pAd, TX_STA_CNT1, &StaTx1.word);
-	RTMP_IO_READ32(pAd, TX_STA_CNT2, &StaTx2.word);
-	pAd->RalinkCounters.OneSecBeaconSentCnt += TxStaCnt0.field.TxBeaconCount;
-	pAd->RalinkCounters.OneSecTxRetryOkCount += StaTx1.field.TxRetransmit;
-	pAd->RalinkCounters.OneSecTxNoRetryOkCount += StaTx1.field.TxSuccess;
-	pAd->RalinkCounters.OneSecTxFailCount += TxStaCnt0.field.TxFailCount;
-	pAd->WlanCounters.TransmittedFragmentCount.u.LowPart += StaTx1.field.TxSuccess;
-	pAd->WlanCounters.RetryCount.u.LowPart += StaTx1.field.TxRetransmit;
-	pAd->WlanCounters.FailedCount.u.LowPart += TxStaCnt0.field.TxFailCount;
-	}
-
-#if 0
-	Retry = StaTx1.field.TxRetransmit;
-	Fail = TxStaCnt0.field.TxFailCount;
-	TxErrorRatio = 0;
-	OneSecTransmitCount = pAd->WlanCounters.TransmittedFragmentCount.u.LowPart- pAd->WlanCounters.LastTransmittedFragmentCount.u.LowPart;
-	if ((OneSecTransmitCount+Retry + Fail) > 0)
-		TxErrorRatio = (( Retry + Fail) *100) / (OneSecTransmitCount+Retry + Fail);
-
-	if ((OneSecTransmitCount+Retry + Fail) > 0)
-		TxErrorRatio = (( Retry + Fail) *100) / (OneSecTransmitCount+Retry + Fail);
-	DBGPRINT(RT_DEBUG_INFO, ("TX ERROR Rate = %ld %%, Retry = %ld, Fail = %ld, Total = %ld  \n",TxErrorRatio, Retry, Fail, (OneSecTransmitCount+Retry + Fail)));
-	pAd->WlanCounters.LastTransmittedFragmentCount.u.LowPart = pAd->WlanCounters.TransmittedFragmentCount.u.LowPart;
-#endif
-
-	//if (pAd->bStaFifoTest == TRUE)
-	{
-		RTMP_IO_READ32(pAd, TX_AGG_CNT, &TxAggCnt.word);
-		RTMP_IO_READ32(pAd, TX_AGG_CNT0, &TxAggCnt0.word);
-		RTMP_IO_READ32(pAd, TX_AGG_CNT1, &TxAggCnt1.word);
-		RTMP_IO_READ32(pAd, TX_AGG_CNT2, &TxAggCnt2.word);
-		RTMP_IO_READ32(pAd, TX_AGG_CNT3, &TxAggCnt3.word);
-		RTMP_IO_READ32(pAd, TX_AGG_CNT4, &TxAggCnt4.word);
-		RTMP_IO_READ32(pAd, TX_AGG_CNT5, &TxAggCnt5.word);
-		RTMP_IO_READ32(pAd, TX_AGG_CNT6, &TxAggCnt6.word);
-		RTMP_IO_READ32(pAd, TX_AGG_CNT7, &TxAggCnt7.word);
-		pAd->RalinkCounters.TxAggCount += TxAggCnt.field.AggTxCount;
-		pAd->RalinkCounters.TxNonAggCount += TxAggCnt.field.NonAggTxCount;
-		pAd->RalinkCounters.TxAgg1MPDUCount += TxAggCnt0.field.AggSize1Count;
-		pAd->RalinkCounters.TxAgg2MPDUCount += TxAggCnt0.field.AggSize2Count;
-
-		pAd->RalinkCounters.TxAgg3MPDUCount += TxAggCnt1.field.AggSize3Count;
-		pAd->RalinkCounters.TxAgg4MPDUCount += TxAggCnt1.field.AggSize4Count;
-		pAd->RalinkCounters.TxAgg5MPDUCount += TxAggCnt2.field.AggSize5Count;
-		pAd->RalinkCounters.TxAgg6MPDUCount += TxAggCnt2.field.AggSize6Count;
-
-		pAd->RalinkCounters.TxAgg7MPDUCount += TxAggCnt3.field.AggSize7Count;
-		pAd->RalinkCounters.TxAgg8MPDUCount += TxAggCnt3.field.AggSize8Count;
-		pAd->RalinkCounters.TxAgg9MPDUCount += TxAggCnt4.field.AggSize9Count;
-		pAd->RalinkCounters.TxAgg10MPDUCount += TxAggCnt4.field.AggSize10Count;
-
-		pAd->RalinkCounters.TxAgg11MPDUCount += TxAggCnt5.field.AggSize11Count;
-		pAd->RalinkCounters.TxAgg12MPDUCount += TxAggCnt5.field.AggSize12Count;
-		pAd->RalinkCounters.TxAgg13MPDUCount += TxAggCnt6.field.AggSize13Count;
-		pAd->RalinkCounters.TxAgg14MPDUCount += TxAggCnt6.field.AggSize14Count;
-
-		pAd->RalinkCounters.TxAgg15MPDUCount += TxAggCnt7.field.AggSize15Count;
-		pAd->RalinkCounters.TxAgg16MPDUCount += TxAggCnt7.field.AggSize16Count;
-
-		// Calculate the transmitted A-MPDU count
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += TxAggCnt0.field.AggSize1Count;
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt0.field.AggSize2Count / 2);
-
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt1.field.AggSize3Count / 3);
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt1.field.AggSize4Count / 4);
-
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt2.field.AggSize5Count / 5);
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt2.field.AggSize6Count / 6);
-
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt3.field.AggSize7Count / 7);
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt3.field.AggSize8Count / 8);
-
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt4.field.AggSize9Count / 9);
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt4.field.AggSize10Count / 10);
-
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt5.field.AggSize11Count / 11);
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt5.field.AggSize12Count / 12);
-
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt6.field.AggSize13Count / 13);
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt6.field.AggSize14Count / 14);
-
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt7.field.AggSize15Count / 15);
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt7.field.AggSize16Count / 16);
-	}
-
-#ifdef DBG_DIAGNOSE
-	{
-		RtmpDiagStruct	*pDiag;
-		COUNTER_RALINK	*pRalinkCounters;
-		UCHAR			ArrayCurIdx, i;
-
-		pDiag = &pAd->DiagStruct;
-		pRalinkCounters = &pAd->RalinkCounters;
-		ArrayCurIdx = pDiag->ArrayCurIdx;
-
-		if (pDiag->inited == 0)
-		{
-			NdisZeroMemory(pDiag, sizeof(struct _RtmpDiagStrcut_));
-			pDiag->ArrayStartIdx = pDiag->ArrayCurIdx = 0;
-			pDiag->inited = 1;
-		}
-		else
-		{
-			// Tx
-			pDiag->TxFailCnt[ArrayCurIdx] = TxStaCnt0.field.TxFailCount;
-			pDiag->TxAggCnt[ArrayCurIdx] = TxAggCnt.field.AggTxCount;
-			pDiag->TxNonAggCnt[ArrayCurIdx] = TxAggCnt.field.NonAggTxCount;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][0] = TxAggCnt0.field.AggSize1Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][1] = TxAggCnt0.field.AggSize2Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][2] = TxAggCnt1.field.AggSize3Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][3] = TxAggCnt1.field.AggSize4Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][4] = TxAggCnt2.field.AggSize5Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][5] = TxAggCnt2.field.AggSize6Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][6] = TxAggCnt3.field.AggSize7Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][7] = TxAggCnt3.field.AggSize8Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][8] = TxAggCnt4.field.AggSize9Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][9] = TxAggCnt4.field.AggSize10Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][10] = TxAggCnt5.field.AggSize11Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][11] = TxAggCnt5.field.AggSize12Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][12] = TxAggCnt6.field.AggSize13Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][13] = TxAggCnt6.field.AggSize14Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][14] = TxAggCnt7.field.AggSize15Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][15] = TxAggCnt7.field.AggSize16Count;
-
-			pDiag->RxCrcErrCnt[ArrayCurIdx] = RxStaCnt0.field.CrcErr;
-
-			INC_RING_INDEX(pDiag->ArrayCurIdx,  DIAGNOSE_TIME);
-			ArrayCurIdx = pDiag->ArrayCurIdx;
-			for (i =0; i < 9; i++)
-			{
-				pDiag->TxDescCnt[ArrayCurIdx][i]= 0;
-				pDiag->TxSWQueCnt[ArrayCurIdx][i] =0;
-				pDiag->TxMcsCnt[ArrayCurIdx][i] = 0;
-				pDiag->RxMcsCnt[ArrayCurIdx][i] = 0;
-			}
-			pDiag->TxDataCnt[ArrayCurIdx] = 0;
-			pDiag->TxFailCnt[ArrayCurIdx] = 0;
-			pDiag->RxDataCnt[ArrayCurIdx] = 0;
-			pDiag->RxCrcErrCnt[ArrayCurIdx]  = 0;
-//			for (i = 9; i < 16; i++)
-			for (i = 9; i < 24; i++) // 3*3
-			{
-				pDiag->TxDescCnt[ArrayCurIdx][i] = 0;
-				pDiag->TxMcsCnt[ArrayCurIdx][i] = 0;
-				pDiag->RxMcsCnt[ArrayCurIdx][i] = 0;
-}
-
-			if (pDiag->ArrayCurIdx == pDiag->ArrayStartIdx)
-				INC_RING_INDEX(pDiag->ArrayStartIdx,  DIAGNOSE_TIME);
-		}
-
-	}
-#endif // DBG_DIAGNOSE //
-
-
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Reset NIC from error
-
-	Arguments:
-		Adapter						Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-
-	Note:
-		Reset NIC from error state
-
-	========================================================================
-*/
-VOID	NICResetFromError(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	// Reset BBP (according to alex, reset ASIC will force reset BBP
-	// Therefore, skip the reset BBP
-	// RTMP_IO_WRITE32(pAd, MAC_CSR1, 0x2);
-
-	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x1);
-	// Remove ASIC from reset state
-	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x0);
-
-	NICInitializeAdapter(pAd, FALSE);
-	NICInitAsicFromEEPROM(pAd);
-
-	// Switch to current channel, since during reset process, the connection should remains on.
-	AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
-	AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		erase 8051 firmware image in MAC ASIC
-
-	Arguments:
-		Adapter						Pointer to our adapter
-
-	IRQL = PASSIVE_LEVEL
-
-	========================================================================
-*/
-VOID NICEraseFirmware(
-	IN PRTMP_ADAPTER pAd)
-{
-	ULONG i;
-
-	for(i=0; i<MAX_FIRMWARE_IMAGE_SIZE; i+=4)
-		RTMP_IO_WRITE32(pAd, FIRMWARE_IMAGE_BASE + i, 0);
-
-}/* End of NICEraseFirmware */
-
-/*
-	========================================================================
-
-	Routine Description:
-		Load 8051 firmware RT2561.BIN file into MAC ASIC
-
-	Arguments:
-		Adapter						Pointer to our adapter
-
-	Return Value:
-		NDIS_STATUS_SUCCESS         firmware image load ok
-		NDIS_STATUS_FAILURE         image not found
-
-	IRQL = PASSIVE_LEVEL
-
-	========================================================================
-*/
-NDIS_STATUS NICLoadFirmware(
-	IN PRTMP_ADAPTER pAd)
-{
-#ifdef BIN_IN_FILE
-#define NICLF_DEFAULT_USE()	\
-	flg_default_firm_use = TRUE; \
-	printk("%s - Use default firmware!\n", __func__);
-
-	NDIS_STATUS		Status = NDIS_STATUS_SUCCESS;
-	PUCHAR			src;
-	struct file		*srcf;
-	INT 			retval, orgfsuid, orgfsgid, i;
-   	mm_segment_t	orgfs;
-	PUCHAR			pFirmwareImage;
-	UINT			FileLength = 0;
-	UINT32			MacReg;
-	ULONG			Index;
-	ULONG			firm;
-	BOOLEAN			flg_default_firm_use = FALSE;
-
-
-	DBGPRINT(RT_DEBUG_TRACE, ("===> %s\n", __func__));
-
-	/* init */
-	pFirmwareImage = NULL;
-	src = RTMP_FIRMWARE_FILE_NAME;
-
-	/* save uid and gid used for filesystem access.
-	   set user and group to 0 (root) */
-	orgfsuid = current->fsuid;
-	orgfsgid = current->fsgid;
-	current->fsuid = current->fsgid = 0;
-    orgfs = get_fs();
-    set_fs(KERNEL_DS);
-
-	pAd->FirmwareVersion = (FIRMWARE_MAJOR_VERSION << 8) + \
-						   FIRMWARE_MINOR_VERSION;
-
-
-	/* allocate firmware buffer */
-    pFirmwareImage = kmalloc(MAX_FIRMWARE_IMAGE_SIZE, MEM_ALLOC_FLAG);
-    if (pFirmwareImage == NULL)
-	{
-		/* allocate fail, use default firmware array in firmware.h */
-		printk("%s - Allocate memory fail!\n", __func__);
-		NICLF_DEFAULT_USE();
-    }
-	else
-	{
-		/* allocate ok! zero the firmware buffer */
-		memset(pFirmwareImage, 0x00, MAX_FIRMWARE_IMAGE_SIZE);
-	} /* End of if */
-
-
-	/* if ok, read firmware file from *.bin file */
-	if (flg_default_firm_use == FALSE)
-	{
-		do
-		{
-			/* open the bin file */
-			srcf = filp_open(src, O_RDONLY, 0);
-
-			if (IS_ERR(srcf))
-			{
-				printk("%s - Error %ld opening %s\n",
-					   __func__, -PTR_ERR(srcf), src);
-				NICLF_DEFAULT_USE();
-				break;
-			} /* End of if */
-
-			/* the object must have a read method */
-			if ((srcf->f_op == NULL) || (srcf->f_op->read == NULL))
-			{
-				printk("%s - %s does not have a write method\n", __func__, src);
-				NICLF_DEFAULT_USE();
-				break;
-			} /* End of if */
-
-			/* read the firmware from the file *.bin */
-			FileLength = srcf->f_op->read(srcf,
-										  pFirmwareImage,
-										  MAX_FIRMWARE_IMAGE_SIZE,
-										  &srcf->f_pos);
-
-			if (FileLength != MAX_FIRMWARE_IMAGE_SIZE)
-			{
-				printk("%s: error file length (=%d) in RT2860AP.BIN\n",
-					   __func__, FileLength);
-				NICLF_DEFAULT_USE();
-				break;
-			}
-			else
-			{
-				PUCHAR ptr = pFirmwareImage;
-				USHORT crc = 0xffff;
-
-
-				/* calculate firmware CRC */
-				for(i=0; i<(MAX_FIRMWARE_IMAGE_SIZE-2); i++, ptr++)
-					crc = ByteCRC16(BitReverse(*ptr), crc);
-				/* End of for */
-
-				if ((pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-2] != \
-								(UCHAR)BitReverse((UCHAR)(crc>>8))) ||
-					(pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-1] != \
-								(UCHAR)BitReverse((UCHAR)crc)))
-				{
-					/* CRC fail */
-					printk("%s: CRC = 0x%02x 0x%02x "
-						   "error, should be 0x%02x 0x%02x\n",
-						   __func__,
-						   pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-2],
-						   pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-1],
-						   (UCHAR)(crc>>8), (UCHAR)(crc));
-					NICLF_DEFAULT_USE();
-					break;
-				}
-				else
-				{
-					/* firmware is ok */
-					pAd->FirmwareVersion = \
-						(pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-4] << 8) +
-						pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-3];
-
-					/* check if firmware version of the file is too old */
-					if ((pAd->FirmwareVersion) < \
-											((FIRMWARE_MAJOR_VERSION << 8) +
-									  	 	 FIRMWARE_MINOR_VERSION))
-					{
-						printk("%s: firmware version too old!\n", __func__);
-						NICLF_DEFAULT_USE();
-						break;
-					} /* End of if */
-				} /* End of if */
-
-				DBGPRINT(RT_DEBUG_TRACE,
-						 ("NICLoadFirmware: CRC ok, ver=%d.%d\n",
-						  pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-4],
-						  pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-3]));
-			} /* End of if (FileLength == MAX_FIRMWARE_IMAGE_SIZE) */
-			break;
-		} while(TRUE);
-
-		/* close firmware file */
-		if (IS_ERR(srcf))
-			;
-		else
-		{
-			retval = filp_close(srcf, NULL);
-			if (retval)
-			{
-				DBGPRINT(RT_DEBUG_ERROR,
-						 ("--> Error %d closing %s\n", -retval, src));
-			} /* End of if */
-		} /* End of if */
-	} /* End of if */
-
-
-	/* write firmware to ASIC */
-	if (flg_default_firm_use == TRUE)
-	{
-		/* use default fimeware, free allocated buffer */
-		if (pFirmwareImage != NULL)
-			kfree(pFirmwareImage);
-		/* End of if */
-
-		/* use default *.bin array */
-		pFirmwareImage = FirmwareImage;
-		FileLength = sizeof(FirmwareImage);
-	} /* End of if */
-
-	/* enable Host program ram write selection */
-	RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0x10000);
-
-	for(i=0; i<FileLength; i+=4)
-	{
-		firm = pFirmwareImage[i] +
-			   (pFirmwareImage[i+3] << 24) +
-			   (pFirmwareImage[i+2] << 16) +
-			   (pFirmwareImage[i+1] << 8);
-
-		RTMP_IO_WRITE32(pAd, FIRMWARE_IMAGE_BASE + i, firm);
-	} /* End of for */
-
-	RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0x00000);
-	RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0x00001);
-
-	/* initialize BBP R/W access agent */
-	RTMP_IO_WRITE32(pAd, H2M_BBP_AGENT, 0);
-	RTMP_IO_WRITE32(pAd, H2M_MAILBOX_CSR, 0);
-
-	if (flg_default_firm_use == FALSE)
-	{
-		/* use file firmware, free allocated buffer */
-		if (pFirmwareImage != NULL)
-			kfree(pFirmwareImage);
-		/* End of if */
-	} /* End of if */
-
-	set_fs(orgfs);
-	current->fsuid = orgfsuid;
-	current->fsgid = orgfsgid;
-#else
-
-	NDIS_STATUS		Status = NDIS_STATUS_SUCCESS;
-	PUCHAR			pFirmwareImage;
-	ULONG			FileLength, Index;
-	//ULONG			firm;
-	UINT32			MacReg = 0;
-#ifdef RT2870
-	UINT32			Version = (pAd->MACVersion >> 16);
-#endif // RT2870 //
-
-	pFirmwareImage = FirmwareImage;
-	FileLength = sizeof(FirmwareImage);
-#ifdef RT2870
-	// New 8k byte firmware size for RT3071/RT3072
-	//printk("Usb Chip\n");
-	if (FIRMWAREIMAGE_LENGTH == FIRMWAREIMAGE_MAX_LENGTH)
-	//The firmware image consists of two parts. One is the origianl and the other is the new.
-	//Use Second Part
-	{
-		if ((Version != 0x2860) && (Version != 0x2872) && (Version != 0x3070))
-		{	// Use Firmware V2.
-			//printk("KH:Use New Version,part2\n");
-			pFirmwareImage = (PUCHAR)&FirmwareImage[FIRMWAREIMAGEV1_LENGTH];
-			FileLength = FIRMWAREIMAGEV2_LENGTH;
-		}
-		else
-		{
-			//printk("KH:Use New Version,part1\n");
-			pFirmwareImage = FirmwareImage;
-			FileLength = FIRMWAREIMAGEV1_LENGTH;
-		}
-	}
-	else
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("KH: bin file should be 8KB.\n"));
-		Status = NDIS_STATUS_FAILURE;
-	}
-
-#endif // RT2870 //
-
-#if 0
-	/* enable Host program ram write selection */
-	RT28XX_FIRMUD_INIT(pAd);
-
-	for(i=0; i<FileLength; i+=4)
-	{
-		firm = pFirmwareImage[i] +
-			   (pFirmwareImage[i+3] << 24) +
-			   (pFirmwareImage[i+2] << 16) +
-			   (pFirmwareImage[i+1] << 8);
-
-		RTMP_IO_WRITE32(pAd, FIRMWARE_IMAGE_BASE + i, firm);
-	} /* End of for */
-
-	RT28XX_FIRMUD_END(pAd);
-#else
-	RT28XX_WRITE_FIRMWARE(pAd, pFirmwareImage, FileLength);
-#endif
-
-#endif
-
-	/* check if MCU is ready */
-	Index = 0;
-	do
-	{
-		RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &MacReg);
-
-		if (MacReg & 0x80)
-			break;
-
-		RTMPusecDelay(1000);
-	} while (Index++ < 1000);
-
-    if (Index >= 1000)
-	{
-		Status = NDIS_STATUS_FAILURE;
-		DBGPRINT(RT_DEBUG_ERROR, ("NICLoadFirmware: MCU is not ready\n\n\n"));
-	} /* End of if */
-
-#if 0
-    DBGPRINT(RT_DEBUG_TRACE,
-			 ("<=== %s (src=%s, status=%d)\n", __func__, src, Status));
-#else
-    DBGPRINT(RT_DEBUG_TRACE,
-			 ("<=== %s (status=%d)\n", __func__, Status));
-#endif
-    return Status;
-} /* End of NICLoadFirmware */
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Load Tx rate switching parameters
-
-	Arguments:
-		Adapter						Pointer to our adapter
-
-	Return Value:
-		NDIS_STATUS_SUCCESS         firmware image load ok
-		NDIS_STATUS_FAILURE         image not found
-
-	IRQL = PASSIVE_LEVEL
-
-	Rate Table Format:
-		1. (B0: Valid Item number) (B1:Initial item from zero)
-		2. Item Number(Dec)      Mode(Hex)     Current MCS(Dec)    TrainUp(Dec)    TrainDown(Dec)
-
-	========================================================================
-*/
-NDIS_STATUS NICLoadRateSwitchingParams(
-	IN PRTMP_ADAPTER pAd)
-{
-#if 0
-	NDIS_STATUS Status;
-
-	NDIS_HANDLE FileHandle;
-	UINT FileLength = 0, i, j;
-	PUCHAR pFirmwareImage;
-	NDIS_STRING FileName;
-	NDIS_PHYSICAL_ADDRESS HighestAcceptableMax = NDIS_PHYSICAL_ADDRESS_CONST(-1, -1);
-
-	DBGPRINT(RT_DEBUG_TRACE,("===> NICLoadRateSwitchingParams \n"));
-	pAd->CommonCfg.TxRateTableSize = 0;
-
-	if ((pAd->DeviceID == NIC2860_PCI_DEVICE_ID) || (pAd->DeviceID == NIC2860_PCIe_DEVICE_ID))
-	{
-		NdisInitializeString(&FileName,"rate.bin");
-		DBGPRINT(RT_DEBUG_TRACE, ("NICLoadRateSwitchingParams: load file - rate.bin for tx rate switch \n"));
-	}
-	else
-	{
-		DBGPRINT_ERR(("NICLoadRateSwitchingParams: wrong DeviceID = 0x%04x, can't find Tx rate switch parameters file\n", pAd->DeviceID));
-		return NDIS_STATUS_SUCCESS;
-	}
-	NdisOpenFile(&Status, &FileHandle, &FileLength, &FileName, HighestAcceptableMax);
-	NdisFreeString(FileName);
-
-	if (Status != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("NICLoadRateSwitchingParams: NdisOpenFile() failed, used RateSwitchTable instead\n"));
-		return NDIS_STATUS_SUCCESS;
-	}
-
-	if ((FileLength == 0) || (FileLength > (MAX_STEP_OF_TX_RATE_SWITCH+1)*16))
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("NICLoadRateSwitchingParams: file size is not reasonable, used RateSwitchTable instead\n"));
-
-		NdisCloseFile(FileHandle);
-		return NDIS_STATUS_SUCCESS;
-	}
-	else
-	{
-		//
-		// NDIS_STATUS_SUCCESS means
-		// The handle at FileHandle is valid for a subsequent call to NdisMapFile.
-		//
-		NdisMapFile(&Status, &pFirmwareImage, FileHandle);
-		DBGPRINT(RT_DEBUG_TRACE, ("NdisMapFile FileLength=%d\n", FileLength));
-	}
-
-	for (i=0, j=0; i<FileLength; i++)
-	{
-		if ((i%16) <= 4)	// trim reserved field
-		{
-			if (i%16 == 1)	// deal with DEC and HEX, only row0 is Hex, others are Dec
-			{
-				RateSwitchTable[j] = *(pFirmwareImage + i);
-			}
-			else
-			{
-				RateSwitchTable[j] = (*(pFirmwareImage + i)>>4) * 10 + (*(pFirmwareImage + i) & 0x0F);
-			}
-
-			j++;
-		}
-	}
-
-	pAd->CommonCfg.TxRateTableSize = RateSwitchTable[0];		// backup table size
-
-	if (Status == NDIS_STATUS_SUCCESS)
-	{
-		NdisUnmapFile(FileHandle);
-		NdisCloseFile(FileHandle);
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE,("<=== NICLoadRateSwitchingParams(Valid TxRateTable item number=%d)\n", pAd->CommonCfg.TxRateTableSize));
-#endif
-	return NDIS_STATUS_SUCCESS;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		if  pSrc1 all zero with length Length, return 0.
-		If not all zero, return 1
-
-	Arguments:
-		pSrc1
-
-	Return Value:
-		1:			not all zero
-		0:			all zero
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-ULONG	RTMPNotAllZero(
-	IN	PVOID	pSrc1,
-	IN	ULONG	Length)
-{
-	PUCHAR	pMem1;
-	ULONG	Index = 0;
-
-	pMem1 = (PUCHAR) pSrc1;
-
-	for (Index = 0; Index < Length; Index++)
-	{
-		if (pMem1[Index] != 0x0)
-		{
-			break;
-		}
-	}
-
-	if (Index == Length)
-	{
-		return (0);
-	}
-	else
-	{
-		return (1);
-	}
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Compare two memory block
-
-	Arguments:
-		pSrc1		Pointer to first memory address
-		pSrc2		Pointer to second memory address
-
-	Return Value:
-		0:			memory is equal
-		1:			pSrc1 memory is larger
-		2:			pSrc2 memory is larger
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-ULONG	RTMPCompareMemory(
-	IN	PVOID	pSrc1,
-	IN	PVOID	pSrc2,
-	IN	ULONG	Length)
-{
-	PUCHAR	pMem1;
-	PUCHAR	pMem2;
-	ULONG	Index = 0;
-
-	pMem1 = (PUCHAR) pSrc1;
-	pMem2 = (PUCHAR) pSrc2;
-
-	for (Index = 0; Index < Length; Index++)
-	{
-		if (pMem1[Index] > pMem2[Index])
-			return (1);
-		else if (pMem1[Index] < pMem2[Index])
-			return (2);
-	}
-
-	// Equal
-	return (0);
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Zero out memory block
-
-	Arguments:
-		pSrc1		Pointer to memory address
-		Length		Size
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPZeroMemory(
-	IN	PVOID	pSrc,
-	IN	ULONG	Length)
-{
-	PUCHAR	pMem;
-	ULONG	Index = 0;
-
-	pMem = (PUCHAR) pSrc;
-
-	for (Index = 0; Index < Length; Index++)
-	{
-		pMem[Index] = 0x00;
-	}
-}
-
-VOID	RTMPFillMemory(
-	IN	PVOID	pSrc,
-	IN	ULONG	Length,
-	IN	UCHAR	Fill)
-{
-	PUCHAR	pMem;
-	ULONG	Index = 0;
-
-	pMem = (PUCHAR) pSrc;
-
-	for (Index = 0; Index < Length; Index++)
-	{
-		pMem[Index] = Fill;
-	}
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Copy data from memory block 1 to memory block 2
-
-	Arguments:
-		pDest		Pointer to destination memory address
-		pSrc		Pointer to source memory address
-		Length		Copy size
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPMoveMemory(
-	OUT	PVOID	pDest,
-	IN	PVOID	pSrc,
-	IN	ULONG	Length)
-{
-	PUCHAR	pMem1;
-	PUCHAR	pMem2;
-	UINT	Index;
-
-	ASSERT((Length==0) || (pDest && pSrc));
-
-	pMem1 = (PUCHAR) pDest;
-	pMem2 = (PUCHAR) pSrc;
-
-	for (Index = 0; Index < Length; Index++)
-	{
-		pMem1[Index] = pMem2[Index];
-	}
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Initialize port configuration structure
-
-	Arguments:
-		Adapter						Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	UserCfgInit(
-	IN	PRTMP_ADAPTER pAd)
-{
-//	EDCA_PARM DefaultEdcaParm;
-    UINT key_index, bss_index;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("--> UserCfgInit\n"));
-
-	//
-	//  part I. intialize common configuration
-	//
-#ifdef RT2870
-	pAd->BulkOutReq = 0;
-
-	pAd->BulkOutComplete = 0;
-	pAd->BulkOutCompleteOther = 0;
-	pAd->BulkOutCompleteCancel = 0;
-	pAd->BulkInReq = 0;
-	pAd->BulkInComplete = 0;
-	pAd->BulkInCompleteFail = 0;
-
-	//pAd->QuickTimerP = 100;
-	//pAd->TurnAggrBulkInCount = 0;
-	pAd->bUsbTxBulkAggre = 0;
-
-	// init as unsed value to ensure driver will set to MCU once.
-	pAd->LedIndicatorStregth = 0xFF;
-
-	pAd->CommonCfg.MaxPktOneTxBulk = 2;
-	pAd->CommonCfg.TxBulkFactor = 1;
-	pAd->CommonCfg.RxBulkFactor =1;
-
-	pAd->CommonCfg.TxPower = 100; //mW
-
-	NdisZeroMemory(&pAd->CommonCfg.IOTestParm, sizeof(pAd->CommonCfg.IOTestParm));
-#endif // RT2870 //
-
-	for(key_index=0; key_index<SHARE_KEY_NUM; key_index++)
-	{
-		for(bss_index = 0; bss_index < MAX_MBSSID_NUM; bss_index++)
-		{
-			pAd->SharedKey[bss_index][key_index].KeyLen = 0;
-			pAd->SharedKey[bss_index][key_index].CipherAlg = CIPHER_NONE;
-		}
-	}
-
-	pAd->Antenna.word = 0;
-	pAd->CommonCfg.BBPCurrentBW = BW_20;
-
-	pAd->LedCntl.word = 0;
-
-	pAd->bAutoTxAgcA = FALSE;			// Default is OFF
-	pAd->bAutoTxAgcG = FALSE;			// Default is OFF
-	pAd->RfIcType = RFIC_2820;
-
-	// Init timer for reset complete event
-	pAd->CommonCfg.CentralChannel = 1;
-	pAd->bForcePrintTX = FALSE;
-	pAd->bForcePrintRX = FALSE;
-	pAd->bStaFifoTest = FALSE;
-	pAd->bProtectionTest = FALSE;
-	pAd->bHCCATest = FALSE;
-	pAd->bGenOneHCCA = FALSE;
-	pAd->CommonCfg.Dsifs = 10;      // in units of usec
-	pAd->CommonCfg.TxPower = 100; //mW
-	pAd->CommonCfg.TxPowerPercentage = 0xffffffff; // AUTO
-	pAd->CommonCfg.TxPowerDefault = 0xffffffff; // AUTO
-	pAd->CommonCfg.TxPreamble = Rt802_11PreambleAuto; // use Long preamble on TX by defaut
-	pAd->CommonCfg.bUseZeroToDisableFragment = FALSE;
-	pAd->CommonCfg.RtsThreshold = 2347;
-	pAd->CommonCfg.FragmentThreshold = 2346;
-	pAd->CommonCfg.UseBGProtection = 0;    // 0: AUTO
-	pAd->CommonCfg.bEnableTxBurst = TRUE; //0;
-	pAd->CommonCfg.PhyMode = 0xff;     // unknown
-	pAd->CommonCfg.BandState = UNKNOWN_BAND;
-	pAd->CommonCfg.RadarDetect.CSPeriod = 10;
-	pAd->CommonCfg.RadarDetect.CSCount = 0;
-	pAd->CommonCfg.RadarDetect.RDMode = RD_NORMAL_MODE;
-	pAd->CommonCfg.RadarDetect.ChMovingTime = 65;
-	pAd->CommonCfg.RadarDetect.LongPulseRadarTh = 3;
-	pAd->CommonCfg.bAPSDCapable = FALSE;
-	pAd->CommonCfg.bNeedSendTriggerFrame = FALSE;
-	pAd->CommonCfg.TriggerTimerCount = 0;
-	pAd->CommonCfg.bAPSDForcePowerSave = FALSE;
-	pAd->CommonCfg.bCountryFlag = FALSE;
-	pAd->CommonCfg.TxStream = 0;
-	pAd->CommonCfg.RxStream = 0;
-
-	NdisZeroMemory(&pAd->BeaconTxWI, sizeof(pAd->BeaconTxWI));
-
-#ifdef DOT11_N_SUPPORT
-	NdisZeroMemory(&pAd->CommonCfg.HtCapability, sizeof(pAd->CommonCfg.HtCapability));
-	pAd->HTCEnable = FALSE;
-	pAd->bBroadComHT = FALSE;
-	pAd->CommonCfg.bRdg = FALSE;
-
-#ifdef DOT11N_DRAFT3
-	pAd->CommonCfg.Dot11OBssScanPassiveDwell = dot11OBSSScanPassiveDwell;	// Unit : TU. 5~1000
-	pAd->CommonCfg.Dot11OBssScanActiveDwell = dot11OBSSScanActiveDwell;	// Unit : TU. 10~1000
-	pAd->CommonCfg.Dot11BssWidthTriggerScanInt = dot11BSSWidthTriggerScanInterval;	// Unit : Second
-	pAd->CommonCfg.Dot11OBssScanPassiveTotalPerChannel = dot11OBSSScanPassiveTotalPerChannel;	// Unit : TU. 200~10000
-	pAd->CommonCfg.Dot11OBssScanActiveTotalPerChannel = dot11OBSSScanActiveTotalPerChannel;	// Unit : TU. 20~10000
-	pAd->CommonCfg.Dot11BssWidthChanTranDelayFactor = dot11BSSWidthChannelTransactionDelayFactor;
-	pAd->CommonCfg.Dot11OBssScanActivityThre = dot11BSSScanActivityThreshold;	// Unit : percentage
-	pAd->CommonCfg.Dot11BssWidthChanTranDelay = (pAd->CommonCfg.Dot11BssWidthTriggerScanInt * pAd->CommonCfg.Dot11BssWidthChanTranDelayFactor);
-#endif  // DOT11N_DRAFT3 //
-
-	NdisZeroMemory(&pAd->CommonCfg.AddHTInfo, sizeof(pAd->CommonCfg.AddHTInfo));
-	pAd->CommonCfg.BACapability.field.MMPSmode = MMPS_ENABLE;
-	pAd->CommonCfg.BACapability.field.MpduDensity = 0;
-	pAd->CommonCfg.BACapability.field.Policy = IMMED_BA;
-	pAd->CommonCfg.BACapability.field.RxBAWinLimit = 64; //32;
-	pAd->CommonCfg.BACapability.field.TxBAWinLimit = 64; //32;
-	DBGPRINT(RT_DEBUG_TRACE, ("--> UserCfgInit. BACapability = 0x%x\n", pAd->CommonCfg.BACapability.word));
-
-	pAd->CommonCfg.BACapability.field.AutoBA = FALSE;
-	BATableInit(pAd, &pAd->BATable);
-
-	pAd->CommonCfg.bExtChannelSwitchAnnouncement = 1;
-	pAd->CommonCfg.bHTProtect = 1;
-	pAd->CommonCfg.bMIMOPSEnable = TRUE;
-	pAd->CommonCfg.bBADecline = FALSE;
-	pAd->CommonCfg.bDisableReordering = FALSE;
-
-	pAd->CommonCfg.TxBASize = 7;
-
-	pAd->CommonCfg.REGBACapability.word = pAd->CommonCfg.BACapability.word;
-#endif // DOT11_N_SUPPORT //
-
-	//pAd->CommonCfg.HTPhyMode.field.BW = BW_20;
-	//pAd->CommonCfg.HTPhyMode.field.MCS = MCS_AUTO;
-	//pAd->CommonCfg.HTPhyMode.field.ShortGI = GI_800;
-	//pAd->CommonCfg.HTPhyMode.field.STBC = STBC_NONE;
-	pAd->CommonCfg.TxRate = RATE_6;
-
-	pAd->CommonCfg.MlmeTransmit.field.MCS = MCS_RATE_6;
-	pAd->CommonCfg.MlmeTransmit.field.BW = BW_20;
-	pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM;
-
-	pAd->CommonCfg.BeaconPeriod = 100;     // in mSec
-
-	//
-	// part II. intialize STA specific configuration
-	//
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		RX_FILTER_SET_FLAG(pAd, fRX_FILTER_ACCEPT_DIRECT);
-		RX_FILTER_CLEAR_FLAG(pAd, fRX_FILTER_ACCEPT_MULTICAST);
-		RX_FILTER_SET_FLAG(pAd, fRX_FILTER_ACCEPT_BROADCAST);
-		RX_FILTER_SET_FLAG(pAd, fRX_FILTER_ACCEPT_ALL_MULTICAST);
-
-		pAd->StaCfg.Psm = PWR_ACTIVE;
-
-		pAd->StaCfg.OrigWepStatus = Ndis802_11EncryptionDisabled;
-		pAd->StaCfg.PairCipher = Ndis802_11EncryptionDisabled;
-		pAd->StaCfg.GroupCipher = Ndis802_11EncryptionDisabled;
-		pAd->StaCfg.bMixCipher = FALSE;
-		pAd->StaCfg.DefaultKeyId = 0;
-
-		// 802.1x port control
-		pAd->StaCfg.PrivacyFilter = Ndis802_11PrivFilter8021xWEP;
-		pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-		pAd->StaCfg.LastMicErrorTime = 0;
-		pAd->StaCfg.MicErrCnt        = 0;
-		pAd->StaCfg.bBlockAssoc      = FALSE;
-		pAd->StaCfg.WpaState         = SS_NOTUSE;
-
-		pAd->CommonCfg.NdisRadioStateOff = FALSE;		// New to support microsoft disable radio with OID command
-
-		pAd->StaCfg.RssiTrigger = 0;
-		NdisZeroMemory(&pAd->StaCfg.RssiSample, sizeof(RSSI_SAMPLE));
-		pAd->StaCfg.RssiTriggerMode = RSSI_TRIGGERED_UPON_BELOW_THRESHOLD;
-		pAd->StaCfg.AtimWin = 0;
-		pAd->StaCfg.DefaultListenCount = 3;//default listen count;
-		pAd->StaCfg.BssType = BSS_INFRA;  // BSS_INFRA or BSS_ADHOC or BSS_MONITOR
-		pAd->StaCfg.bScanReqIsFromWebUI = FALSE;
-		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
-		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_WAKEUP_NOW);
-
-		pAd->StaCfg.bAutoTxRateSwitch = TRUE;
-		pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
-	}
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-	pAd->StaCfg.IEEE80211dClientMode = Rt802_11_D_None;
-#endif // EXT_BUILD_CHANNEL_LIST //
-#endif // CONFIG_STA_SUPPORT //
-
-	// global variables mXXXX used in MAC protocol state machines
-	OPSTATUS_SET_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM);
-	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_ADHOC_ON);
-	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_INFRA_ON);
-
-	// PHY specification
-	pAd->CommonCfg.PhyMode = PHY_11BG_MIXED;		// default PHY mode
-	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);  // CCK use LONG preamble
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// user desired power mode
-		pAd->StaCfg.WindowsPowerMode = Ndis802_11PowerModeCAM;
-		pAd->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeCAM;
-		pAd->StaCfg.bWindowsACCAMEnable = FALSE;
-
-#ifdef LEAP_SUPPORT
-		// CCX v1.0 releated init value
-		RTMPInitTimer(pAd, &pAd->StaCfg.LeapAuthTimer, GET_TIMER_FUNCTION(LeapAuthTimeout), pAd, FALSE);
-		pAd->StaCfg.LeapAuthMode = CISCO_AuthModeLEAPNone;
-		pAd->StaCfg.bCkipOn = FALSE;
-#endif // LEAP_SUPPORT //
-
-		RTMPInitTimer(pAd, &pAd->StaCfg.StaQuickResponeForRateUpTimer, GET_TIMER_FUNCTION(StaQuickResponeForRateUpExec), pAd, FALSE);
-		pAd->StaCfg.StaQuickResponeForRateUpTimerRunning = FALSE;
-
-		// Patch for Ndtest
-		pAd->StaCfg.ScanCnt = 0;
-
-		// CCX 2.0 control flag init
-		pAd->StaCfg.CCXEnable = FALSE;
-		pAd->StaCfg.CCXReqType = MSRN_TYPE_UNUSED;
-		pAd->StaCfg.CCXQosECWMin	= 4;
-		pAd->StaCfg.CCXQosECWMax	= 10;
-
-		pAd->StaCfg.bHwRadio  = TRUE; // Default Hardware Radio status is On
-		pAd->StaCfg.bSwRadio  = TRUE; // Default Software Radio status is On
-		pAd->StaCfg.bRadio    = TRUE; // bHwRadio && bSwRadio
-		pAd->StaCfg.bHardwareRadio = FALSE;		// Default is OFF
-		pAd->StaCfg.bShowHiddenSSID = FALSE;		// Default no show
-
-		// Nitro mode control
-		pAd->StaCfg.bAutoReconnect = TRUE;
-
-		// Save the init time as last scan time, the system should do scan after 2 seconds.
-		// This patch is for driver wake up from standby mode, system will do scan right away.
-		pAd->StaCfg.LastScanTime = 0;
-		NdisZeroMemory(pAd->nickname, IW_ESSID_MAX_SIZE+1);
-		sprintf(pAd->nickname, "%s", STA_NIC_DEVICE_NAME);
-		RTMPInitTimer(pAd, &pAd->StaCfg.WpaDisassocAndBlockAssocTimer, GET_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc), pAd, FALSE);
-#ifdef WPA_SUPPLICANT_SUPPORT
-		pAd->StaCfg.IEEE8021X = FALSE;
-		pAd->StaCfg.IEEE8021x_required_keys = FALSE;
-		pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_DISABLE;
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-		pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_ENABLE;
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	// Default for extra information is not valid
-	pAd->ExtraInfo = EXTRA_INFO_CLEAR;
-
-	// Default Config change flag
-	pAd->bConfigChanged = FALSE;
-
-	//
-	// part III. AP configurations
-	//
-
-
-	//
-	// part IV. others
-	//
-	// dynamic BBP R66:sensibity tuning to overcome background noise
-	pAd->BbpTuning.bEnable                = TRUE;
-	pAd->BbpTuning.FalseCcaLowerThreshold = 100;
-	pAd->BbpTuning.FalseCcaUpperThreshold = 512;
-	pAd->BbpTuning.R66Delta               = 4;
-	pAd->Mlme.bEnableAutoAntennaCheck = TRUE;
-
-	//
-	// Also initial R66CurrentValue, RTUSBResumeMsduTransmission might use this value.
-	// if not initial this value, the default value will be 0.
-	//
-	pAd->BbpTuning.R66CurrentValue = 0x38;
-
-	pAd->Bbp94 = BBPR94_DEFAULT;
-	pAd->BbpForCCK = FALSE;
-
-	// Default is FALSE for test bit 1
-	//pAd->bTest1 = FALSE;
-
-	// initialize MAC table and allocate spin lock
-	NdisZeroMemory(&pAd->MacTab, sizeof(MAC_TABLE));
-	InitializeQueueHeader(&pAd->MacTab.McastPsQueue);
-	NdisAllocateSpinLock(&pAd->MacTabLock);
-
-	//RTMPInitTimer(pAd, &pAd->RECBATimer, RECBATimerTimeout, pAd, TRUE);
-	//RTMPSetTimer(&pAd->RECBATimer, REORDER_EXEC_INTV);
-
-#ifdef RALINK_ATE
-	NdisZeroMemory(&pAd->ate, sizeof(ATE_INFO));
-	pAd->ate.Mode = ATE_STOP;
-	pAd->ate.TxCount = 200;/* to exceed TX_RING_SIZE ... */
-	pAd->ate.TxLength = 1024;
-	pAd->ate.TxWI.ShortGI = 0;// LONG GI : 800 ns
-	pAd->ate.TxWI.PHYMODE = MODE_CCK;
-	pAd->ate.TxWI.MCS = 3;
-	pAd->ate.TxWI.BW = BW_20;
-	pAd->ate.Channel = 1;
-	pAd->ate.QID = QID_AC_BE;
-	pAd->ate.Addr1[0] = 0x00;
-	pAd->ate.Addr1[1] = 0x11;
-	pAd->ate.Addr1[2] = 0x22;
-	pAd->ate.Addr1[3] = 0xAA;
-	pAd->ate.Addr1[4] = 0xBB;
-	pAd->ate.Addr1[5] = 0xCC;
-	NdisMoveMemory(pAd->ate.Addr2, pAd->ate.Addr1, ETH_LENGTH_OF_ADDRESS);
-	NdisMoveMemory(pAd->ate.Addr3, pAd->ate.Addr1, ETH_LENGTH_OF_ADDRESS);
-	pAd->ate.bRxFer = 0;
-	pAd->ate.bQATxStart = FALSE;
-	pAd->ate.bQARxStart = FALSE;
-#ifdef RALINK_28xx_QA
-	//pAd->ate.Repeat = 0;
-	pAd->ate.TxStatus = 0;
-	pAd->ate.AtePid = NULL;
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
-
-	pAd->CommonCfg.bWiFiTest = FALSE;
-
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<-- UserCfgInit\n"));
-}
-
-// IRQL = PASSIVE_LEVEL
-UCHAR BtoH(char ch)
-{
-	if (ch >= '0' && ch <= '9') return (ch - '0');        // Handle numerals
-	if (ch >= 'A' && ch <= 'F') return (ch - 'A' + 0xA);  // Handle capitol hex digits
-	if (ch >= 'a' && ch <= 'f') return (ch - 'a' + 0xA);  // Handle small hex digits
-	return(255);
-}
-
-//
-//  FUNCTION: AtoH(char *, UCHAR *, int)
-//
-//  PURPOSE:  Converts ascii string to network order hex
-//
-//  PARAMETERS:
-//    src    - pointer to input ascii string
-//    dest   - pointer to output hex
-//    destlen - size of dest
-//
-//  COMMENTS:
-//
-//    2 ascii bytes make a hex byte so must put 1st ascii byte of pair
-//    into upper nibble and 2nd ascii byte of pair into lower nibble.
-//
-// IRQL = PASSIVE_LEVEL
-
-void AtoH(char * src, UCHAR * dest, int destlen)
-{
-	char * srcptr;
-	PUCHAR destTemp;
-
-	srcptr = src;
-	destTemp = (PUCHAR) dest;
-
-	while(destlen--)
-	{
-		*destTemp = BtoH(*srcptr++) << 4;    // Put 1st ascii byte in upper nibble.
-		*destTemp += BtoH(*srcptr++);      // Add 2nd ascii byte to above.
-		destTemp++;
-	}
-}
-
-VOID	RTMPPatchMacBbpBug(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	ULONG	Index;
-
-	// Initialize BBP register to default value
-	for (Index = 0; Index < NUM_BBP_REG_PARMS; Index++)
-	{
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBPRegTable[Index].Register, (UCHAR)BBPRegTable[Index].Value);
-	}
-
-	// Initialize RF register to default value
-	AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
-	AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-
-	// Re-init BBP register from EEPROM value
-	NICInitAsicFromEEPROM(pAd);
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Init timer objects
-
-	Arguments:
-		pAd			Pointer to our adapter
-		pTimer				Timer structure
-		pTimerFunc			Function to execute when timer expired
-		Repeat				Ture for period timer
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPInitTimer(
-	IN	PRTMP_ADAPTER			pAd,
-	IN	PRALINK_TIMER_STRUCT	pTimer,
-	IN	PVOID					pTimerFunc,
-	IN	PVOID					pData,
-	IN	BOOLEAN					Repeat)
-{
-	//
-	// Set Valid to TRUE for later used.
-	// It will crash if we cancel a timer or set a timer
-	// that we haven't initialize before.
-	//
-	pTimer->Valid      = TRUE;
-
-	pTimer->PeriodicType = Repeat;
-	pTimer->State      = FALSE;
-	pTimer->cookie = (ULONG) pData;
-
-#ifdef RT2870
-	pTimer->pAd = pAd;
-#endif // RT2870 //
-
-	RTMP_OS_Init_Timer(pAd,	&pTimer->TimerObj,	pTimerFunc, (PVOID) pTimer);
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Init timer objects
-
-	Arguments:
-		pTimer				Timer structure
-		Value				Timer value in milliseconds
-
-	Return Value:
-		None
-
-	Note:
-		To use this routine, must call RTMPInitTimer before.
-
-	========================================================================
-*/
-VOID	RTMPSetTimer(
-	IN	PRALINK_TIMER_STRUCT	pTimer,
-	IN	ULONG					Value)
-{
-	if (pTimer->Valid)
-	{
-		pTimer->TimerValue = Value;
-		pTimer->State      = FALSE;
-		if (pTimer->PeriodicType == TRUE)
-		{
-			pTimer->Repeat = TRUE;
-			RTMP_SetPeriodicTimer(&pTimer->TimerObj, Value);
-		}
-		else
-		{
-			pTimer->Repeat = FALSE;
-			RTMP_OS_Add_Timer(&pTimer->TimerObj, Value);
-		}
-	}
-	else
-	{
-		DBGPRINT_ERR(("RTMPSetTimer failed, Timer hasn't been initialize!\n"));
-	}
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Init timer objects
-
-	Arguments:
-		pTimer				Timer structure
-		Value				Timer value in milliseconds
-
-	Return Value:
-		None
-
-	Note:
-		To use this routine, must call RTMPInitTimer before.
-
-	========================================================================
-*/
-VOID	RTMPModTimer(
-	IN	PRALINK_TIMER_STRUCT	pTimer,
-	IN	ULONG					Value)
-{
-	BOOLEAN	Cancel;
-
-	if (pTimer->Valid)
-	{
-		pTimer->TimerValue = Value;
-		pTimer->State      = FALSE;
-		if (pTimer->PeriodicType == TRUE)
-		{
-			RTMPCancelTimer(pTimer, &Cancel);
-			RTMPSetTimer(pTimer, Value);
-		}
-		else
-		{
-			RTMP_OS_Mod_Timer(&pTimer->TimerObj, Value);
-		}
-	}
-	else
-	{
-		DBGPRINT_ERR(("RTMPModTimer failed, Timer hasn't been initialize!\n"));
-	}
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Cancel timer objects
-
-	Arguments:
-		Adapter						Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-		1.) To use this routine, must call RTMPInitTimer before.
-		2.) Reset NIC to initial state AS IS system boot up time.
-
-	========================================================================
-*/
-VOID	RTMPCancelTimer(
-	IN	PRALINK_TIMER_STRUCT	pTimer,
-	OUT	BOOLEAN					*pCancelled)
-{
-	if (pTimer->Valid)
-	{
-		if (pTimer->State == FALSE)
-			pTimer->Repeat = FALSE;
-			RTMP_OS_Del_Timer(&pTimer->TimerObj, pCancelled);
-
-		if (*pCancelled == TRUE)
-			pTimer->State = TRUE;
-
-#ifdef RT2870
-		// We need to go-through the TimerQ to findout this timer handler and remove it if
-		//		it's still waiting for execution.
-
-		RT2870_TimerQ_Remove(pTimer->pAd, pTimer);
-#endif // RT2870 //
-	}
-	else
-	{
-		//
-		// NdisMCancelTimer just canced the timer and not mean release the timer.
-		// And don't set the "Valid" to False. So that we can use this timer again.
-		//
-		DBGPRINT_ERR(("RTMPCancelTimer failed, Timer hasn't been initialize!\n"));
-	}
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Set LED Status
-
-	Arguments:
-		pAd						Pointer to our adapter
-		Status					LED Status
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID RTMPSetLED(
-	IN PRTMP_ADAPTER 	pAd,
-	IN UCHAR			Status)
-{
-	//ULONG			data;
-	UCHAR			HighByte = 0;
-	UCHAR			LowByte;
-
-// In ATE mode of RT2860 AP/STA, we have erased 8051 firmware.
-// So LED mode is not supported when ATE is running.
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-	LowByte = pAd->LedCntl.field.LedMode&0x7f;
-	switch (Status)
-	{
-		case LED_LINK_DOWN:
-			HighByte = 0x20;
-			AsicSendCommandToMcu(pAd, 0x50, 0xff, LowByte, HighByte);
-			pAd->LedIndicatorStregth = 0;
-			break;
-		case LED_LINK_UP:
-			if (pAd->CommonCfg.Channel > 14)
-				HighByte = 0xa0;
-			else
-				HighByte = 0x60;
-			AsicSendCommandToMcu(pAd, 0x50, 0xff, LowByte, HighByte);
-			break;
-		case LED_RADIO_ON:
-			HighByte = 0x20;
-			AsicSendCommandToMcu(pAd, 0x50, 0xff, LowByte, HighByte);
-			break;
-		case LED_HALT:
-			LowByte = 0; // Driver sets MAC register and MAC controls LED
-		case LED_RADIO_OFF:
-			HighByte = 0;
-			AsicSendCommandToMcu(pAd, 0x50, 0xff, LowByte, HighByte);
-			break;
-        case LED_WPS:
-			HighByte = 0x10;
-			AsicSendCommandToMcu(pAd, 0x50, 0xff, LowByte, HighByte);
-			break;
-		case LED_ON_SITE_SURVEY:
-			HighByte = 0x08;
-			AsicSendCommandToMcu(pAd, 0x50, 0xff, LowByte, HighByte);
-			break;
-		case LED_POWER_UP:
-			HighByte = 0x04;
-			AsicSendCommandToMcu(pAd, 0x50, 0xff, LowByte, HighByte);
-			break;
-		default:
-			DBGPRINT(RT_DEBUG_WARN, ("RTMPSetLED::Unknown Status %d\n", Status));
-			break;
-	}
-
-    //
-	// Keep LED status for LED SiteSurvey mode.
-	// After SiteSurvey, we will set the LED mode to previous status.
-	//
-	if ((Status != LED_ON_SITE_SURVEY) && (Status != LED_POWER_UP))
-		pAd->LedStatus = Status;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetLED::Mode=%d,HighByte=0x%02x,LowByte=0x%02x\n", pAd->LedCntl.field.LedMode, HighByte, LowByte));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Set LED Signal Stregth
-
-	Arguments:
-		pAd						Pointer to our adapter
-		Dbm						Signal Stregth
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-
-	Note:
-		Can be run on any IRQL level.
-
-		According to Microsoft Zero Config Wireless Signal Stregth definition as belows.
-		<= -90  No Signal
-		<= -81  Very Low
-		<= -71  Low
-		<= -67  Good
-		<= -57  Very Good
-		 > -57  Excellent
-	========================================================================
-*/
-VOID RTMPSetSignalLED(
-	IN PRTMP_ADAPTER 	pAd,
-	IN NDIS_802_11_RSSI Dbm)
-{
-	UCHAR		nLed = 0;
-
-	//
-	// if not Signal Stregth, then do nothing.
-	//
-	if (pAd->LedCntl.field.LedMode != LED_MODE_SIGNAL_STREGTH)
-	{
-		return;
-	}
-
-	if (Dbm <= -90)
-		nLed = 0;
-	else if (Dbm <= -81)
-		nLed = 1;
-	else if (Dbm <= -71)
-		nLed = 3;
-	else if (Dbm <= -67)
-		nLed = 7;
-	else if (Dbm <= -57)
-		nLed = 15;
-	else
-		nLed = 31;
-
-	//
-	// Update Signal Stregth to firmware if changed.
-	//
-	if (pAd->LedIndicatorStregth != nLed)
-	{
-		AsicSendCommandToMcu(pAd, 0x51, 0xff, nLed, pAd->LedCntl.field.Polarity);
-		pAd->LedIndicatorStregth = nLed;
-	}
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Enable RX
-
-	Arguments:
-		pAd						Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL <= DISPATCH_LEVEL
-
-	Note:
-		Before Enable RX, make sure you have enabled Interrupt.
-	========================================================================
-*/
-VOID RTMPEnableRxTx(
-	IN PRTMP_ADAPTER	pAd)
-{
-//	WPDMA_GLO_CFG_STRUC	GloCfg;
-//	ULONG	i = 0;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("==> RTMPEnableRxTx\n"));
-
-#if 0
-	// Enable Rx DMA.
-	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x4);
-	do
-	{
-		RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &GloCfg.word);
-		if ((GloCfg.field.TxDMABusy == 0)  && (GloCfg.field.RxDMABusy == 0))
-			break;
-
-		DBGPRINT(RT_DEBUG_TRACE, ("==>  DMABusy\n"));
-		RTMPusecDelay(1000);
-		i++;
-	}while ( i <200);
-
-	RTMPusecDelay(50);
-	RT28XX_DMA_WRITE_INIT(GloCfg);
-	DBGPRINT(RT_DEBUG_TRACE, ("<== WRITE DMA offset 0x208 = 0x%x\n", GloCfg.word));
-	RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, GloCfg.word);
-
-	RT28XX_DMA_POST_WRITE(pAd);
-#else
-	// Enable Rx DMA.
-	RT28XXDMAEnable(pAd);
-#endif
-
-	// enable RX of MAC block
-	if (pAd->OpMode == OPMODE_AP)
-	{
-		UINT32 rx_filter_flag = APNORMAL;
-
-
-		RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, rx_filter_flag);     // enable RX of DMA block
-	}
-	else
-	{
-		RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, STANORMAL);     // Staion not drop control frame will fail WiFi Certification.
-	}
-
-	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0xc);
-	DBGPRINT(RT_DEBUG_TRACE, ("<== RTMPEnableRxTx\n"));
-}
-
-
+#include "../../rt2860/common/rtmp_init.c"
diff --git a/drivers/staging/rt2870/common/rtmp_tkip.c b/drivers/staging/rt2870/common/rtmp_tkip.c
index 2847409ff08..240bf67f521 100644
--- a/drivers/staging/rt2870/common/rtmp_tkip.c
+++ b/drivers/staging/rt2870/common/rtmp_tkip.c
@@ -1,1613 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	rtmp_tkip.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Paul Wu		02-25-02		Initial
-*/
-
-#include "../rt_config.h"
-
-// Rotation functions on 32 bit values
-#define ROL32( A, n ) \
-	( ((A) << (n)) | ( ((A)>>(32-(n))) & ( (1UL << (n)) - 1 ) ) )
-#define ROR32( A, n ) ROL32( (A), 32-(n) )
-
-UINT Tkip_Sbox_Lower[256] =
-{
-	0xA5,0x84,0x99,0x8D,0x0D,0xBD,0xB1,0x54,
-	0x50,0x03,0xA9,0x7D,0x19,0x62,0xE6,0x9A,
-	0x45,0x9D,0x40,0x87,0x15,0xEB,0xC9,0x0B,
-	0xEC,0x67,0xFD,0xEA,0xBF,0xF7,0x96,0x5B,
-	0xC2,0x1C,0xAE,0x6A,0x5A,0x41,0x02,0x4F,
-	0x5C,0xF4,0x34,0x08,0x93,0x73,0x53,0x3F,
-	0x0C,0x52,0x65,0x5E,0x28,0xA1,0x0F,0xB5,
-	0x09,0x36,0x9B,0x3D,0x26,0x69,0xCD,0x9F,
-	0x1B,0x9E,0x74,0x2E,0x2D,0xB2,0xEE,0xFB,
-	0xF6,0x4D,0x61,0xCE,0x7B,0x3E,0x71,0x97,
-	0xF5,0x68,0x00,0x2C,0x60,0x1F,0xC8,0xED,
-	0xBE,0x46,0xD9,0x4B,0xDE,0xD4,0xE8,0x4A,
-	0x6B,0x2A,0xE5,0x16,0xC5,0xD7,0x55,0x94,
-	0xCF,0x10,0x06,0x81,0xF0,0x44,0xBA,0xE3,
-	0xF3,0xFE,0xC0,0x8A,0xAD,0xBC,0x48,0x04,
-	0xDF,0xC1,0x75,0x63,0x30,0x1A,0x0E,0x6D,
-	0x4C,0x14,0x35,0x2F,0xE1,0xA2,0xCC,0x39,
-	0x57,0xF2,0x82,0x47,0xAC,0xE7,0x2B,0x95,
-	0xA0,0x98,0xD1,0x7F,0x66,0x7E,0xAB,0x83,
-	0xCA,0x29,0xD3,0x3C,0x79,0xE2,0x1D,0x76,
-	0x3B,0x56,0x4E,0x1E,0xDB,0x0A,0x6C,0xE4,
-	0x5D,0x6E,0xEF,0xA6,0xA8,0xA4,0x37,0x8B,
-	0x32,0x43,0x59,0xB7,0x8C,0x64,0xD2,0xE0,
-	0xB4,0xFA,0x07,0x25,0xAF,0x8E,0xE9,0x18,
-	0xD5,0x88,0x6F,0x72,0x24,0xF1,0xC7,0x51,
-	0x23,0x7C,0x9C,0x21,0xDD,0xDC,0x86,0x85,
-	0x90,0x42,0xC4,0xAA,0xD8,0x05,0x01,0x12,
-	0xA3,0x5F,0xF9,0xD0,0x91,0x58,0x27,0xB9,
-	0x38,0x13,0xB3,0x33,0xBB,0x70,0x89,0xA7,
-	0xB6,0x22,0x92,0x20,0x49,0xFF,0x78,0x7A,
-	0x8F,0xF8,0x80,0x17,0xDA,0x31,0xC6,0xB8,
-	0xC3,0xB0,0x77,0x11,0xCB,0xFC,0xD6,0x3A
-};
-
-UINT Tkip_Sbox_Upper[256] =
-{
-	0xC6,0xF8,0xEE,0xF6,0xFF,0xD6,0xDE,0x91,
-	0x60,0x02,0xCE,0x56,0xE7,0xB5,0x4D,0xEC,
-	0x8F,0x1F,0x89,0xFA,0xEF,0xB2,0x8E,0xFB,
-	0x41,0xB3,0x5F,0x45,0x23,0x53,0xE4,0x9B,
-	0x75,0xE1,0x3D,0x4C,0x6C,0x7E,0xF5,0x83,
-	0x68,0x51,0xD1,0xF9,0xE2,0xAB,0x62,0x2A,
-	0x08,0x95,0x46,0x9D,0x30,0x37,0x0A,0x2F,
-	0x0E,0x24,0x1B,0xDF,0xCD,0x4E,0x7F,0xEA,
-	0x12,0x1D,0x58,0x34,0x36,0xDC,0xB4,0x5B,
-	0xA4,0x76,0xB7,0x7D,0x52,0xDD,0x5E,0x13,
-	0xA6,0xB9,0x00,0xC1,0x40,0xE3,0x79,0xB6,
-	0xD4,0x8D,0x67,0x72,0x94,0x98,0xB0,0x85,
-	0xBB,0xC5,0x4F,0xED,0x86,0x9A,0x66,0x11,
-	0x8A,0xE9,0x04,0xFE,0xA0,0x78,0x25,0x4B,
-	0xA2,0x5D,0x80,0x05,0x3F,0x21,0x70,0xF1,
-	0x63,0x77,0xAF,0x42,0x20,0xE5,0xFD,0xBF,
-	0x81,0x18,0x26,0xC3,0xBE,0x35,0x88,0x2E,
-	0x93,0x55,0xFC,0x7A,0xC8,0xBA,0x32,0xE6,
-	0xC0,0x19,0x9E,0xA3,0x44,0x54,0x3B,0x0B,
-	0x8C,0xC7,0x6B,0x28,0xA7,0xBC,0x16,0xAD,
-	0xDB,0x64,0x74,0x14,0x92,0x0C,0x48,0xB8,
-	0x9F,0xBD,0x43,0xC4,0x39,0x31,0xD3,0xF2,
-	0xD5,0x8B,0x6E,0xDA,0x01,0xB1,0x9C,0x49,
-	0xD8,0xAC,0xF3,0xCF,0xCA,0xF4,0x47,0x10,
-	0x6F,0xF0,0x4A,0x5C,0x38,0x57,0x73,0x97,
-	0xCB,0xA1,0xE8,0x3E,0x96,0x61,0x0D,0x0F,
-	0xE0,0x7C,0x71,0xCC,0x90,0x06,0xF7,0x1C,
-	0xC2,0x6A,0xAE,0x69,0x17,0x99,0x3A,0x27,
-	0xD9,0xEB,0x2B,0x22,0xD2,0xA9,0x07,0x33,
-	0x2D,0x3C,0x15,0xC9,0x87,0xAA,0x50,0xA5,
-	0x03,0x59,0x09,0x1A,0x65,0xD7,0x84,0xD0,
-	0x82,0x29,0x5A,0x1E,0x7B,0xA8,0x6D,0x2C
-};
-
-/*****************************/
-/******** SBOX Table *********/
-/*****************************/
-
-UCHAR SboxTable[256] =
-{
-	0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5,
-	0x30, 0x01, 0x67, 0x2b, 0xfe, 0xd7, 0xab, 0x76,
-	0xca, 0x82, 0xc9, 0x7d, 0xfa, 0x59, 0x47, 0xf0,
-	0xad, 0xd4, 0xa2, 0xaf, 0x9c, 0xa4, 0x72, 0xc0,
-	0xb7, 0xfd, 0x93, 0x26, 0x36, 0x3f, 0xf7, 0xcc,
-	0x34, 0xa5, 0xe5, 0xf1, 0x71, 0xd8, 0x31, 0x15,
-	0x04, 0xc7, 0x23, 0xc3, 0x18, 0x96, 0x05, 0x9a,
-	0x07, 0x12, 0x80, 0xe2, 0xeb, 0x27, 0xb2, 0x75,
-	0x09, 0x83, 0x2c, 0x1a, 0x1b, 0x6e, 0x5a, 0xa0,
-	0x52, 0x3b, 0xd6, 0xb3, 0x29, 0xe3, 0x2f, 0x84,
-	0x53, 0xd1, 0x00, 0xed, 0x20, 0xfc, 0xb1, 0x5b,
-	0x6a, 0xcb, 0xbe, 0x39, 0x4a, 0x4c, 0x58, 0xcf,
-	0xd0, 0xef, 0xaa, 0xfb, 0x43, 0x4d, 0x33, 0x85,
-	0x45, 0xf9, 0x02, 0x7f, 0x50, 0x3c, 0x9f, 0xa8,
-	0x51, 0xa3, 0x40, 0x8f, 0x92, 0x9d, 0x38, 0xf5,
-	0xbc, 0xb6, 0xda, 0x21, 0x10, 0xff, 0xf3, 0xd2,
-	0xcd, 0x0c, 0x13, 0xec, 0x5f, 0x97, 0x44, 0x17,
-	0xc4, 0xa7, 0x7e, 0x3d, 0x64, 0x5d, 0x19, 0x73,
-	0x60, 0x81, 0x4f, 0xdc, 0x22, 0x2a, 0x90, 0x88,
-	0x46, 0xee, 0xb8, 0x14, 0xde, 0x5e, 0x0b, 0xdb,
-	0xe0, 0x32, 0x3a, 0x0a, 0x49, 0x06, 0x24, 0x5c,
-	0xc2, 0xd3, 0xac, 0x62, 0x91, 0x95, 0xe4, 0x79,
-	0xe7, 0xc8, 0x37, 0x6d, 0x8d, 0xd5, 0x4e, 0xa9,
-	0x6c, 0x56, 0xf4, 0xea, 0x65, 0x7a, 0xae, 0x08,
-	0xba, 0x78, 0x25, 0x2e, 0x1c, 0xa6, 0xb4, 0xc6,
-	0xe8, 0xdd, 0x74, 0x1f, 0x4b, 0xbd, 0x8b, 0x8a,
-	0x70, 0x3e, 0xb5, 0x66, 0x48, 0x03, 0xf6, 0x0e,
-	0x61, 0x35, 0x57, 0xb9, 0x86, 0xc1, 0x1d, 0x9e,
-	0xe1, 0xf8, 0x98, 0x11, 0x69, 0xd9, 0x8e, 0x94,
-	0x9b, 0x1e, 0x87, 0xe9, 0xce, 0x55, 0x28, 0xdf,
-	0x8c, 0xa1, 0x89, 0x0d, 0xbf, 0xe6, 0x42, 0x68,
-	0x41, 0x99, 0x2d, 0x0f, 0xb0, 0x54, 0xbb, 0x16
-};
-
-VOID xor_32(
-	IN  PUCHAR              a,
-	IN  PUCHAR              b,
-	OUT PUCHAR              out);
-
-VOID xor_128(
-	IN  PUCHAR              a,
-	IN  PUCHAR              b,
-	OUT PUCHAR              out);
-
-VOID next_key(
-	IN  PUCHAR              key,
-	IN  INT                 round);
-
-VOID byte_sub(
-	IN  PUCHAR              in,
-	OUT PUCHAR              out);
-
-VOID shift_row(
-	IN  PUCHAR              in,
-	OUT PUCHAR              out);
-
-VOID mix_column(
-	IN  PUCHAR              in,
-	OUT PUCHAR              out);
-
-UCHAR RTMPCkipSbox(
-	IN  UCHAR               a);
-//
-// Expanded IV for TKIP function.
-//
-typedef	struct	PACKED _IV_CONTROL_
-{
-	union PACKED
-	{
-		struct PACKED
-		{
-			UCHAR		rc0;
-			UCHAR		rc1;
-			UCHAR		rc2;
-
-			union PACKED
-			{
-				struct PACKED
-				{
-#ifdef RT_BIG_ENDIAN
-					UCHAR	KeyID:2;
-					UCHAR	ExtIV:1;
-					UCHAR	Rsvd:5;
-#else
-					UCHAR	Rsvd:5;
-					UCHAR	ExtIV:1;
-					UCHAR	KeyID:2;
-#endif
-				}	field;
-				UCHAR		Byte;
-			}	CONTROL;
-		}	field;
-
-		ULONG	word;
-	}	IV16;
-
-	ULONG	IV32;
-}	TKIP_IV, *PTKIP_IV;
-
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Convert from UCHAR[] to ULONG in a portable way
-
-	Arguments:
-      pMICKey		pointer to MIC Key
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-ULONG	RTMPTkipGetUInt32(
-	IN	PUCHAR	pMICKey)
-{
-	ULONG	res = 0;
-	INT		i;
-
-	for (i = 0; i < 4; i++)
-	{
-		res |= (*pMICKey++) << (8 * i);
-	}
-
-	return res;
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Convert from ULONG to UCHAR[] in a portable way
-
-	Arguments:
-      pDst			pointer to destination for convert ULONG to UCHAR[]
-      val			the value for convert
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPTkipPutUInt32(
-	IN OUT	PUCHAR		pDst,
-	IN		ULONG		val)
-{
-	INT i;
-
-	for(i = 0; i < 4; i++)
-	{
-		*pDst++ = (UCHAR) (val & 0xff);
-		val >>= 8;
-	}
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Set the MIC Key.
-
-	Arguments:
-      pAd		Pointer to our adapter
-      pMICKey		pointer to MIC Key
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID RTMPTkipSetMICKey(
-	IN	PTKIP_KEY_INFO	pTkip,
-	IN	PUCHAR			pMICKey)
-{
-	// Set the key
-	pTkip->K0 = RTMPTkipGetUInt32(pMICKey);
-	pTkip->K1 = RTMPTkipGetUInt32(pMICKey + 4);
-	// and reset the message
-	pTkip->L = pTkip->K0;
-	pTkip->R = pTkip->K1;
-	pTkip->nBytesInM = 0;
-	pTkip->M = 0;
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Calculate the MIC Value.
-
-	Arguments:
-      pAd		Pointer to our adapter
-      uChar			Append this uChar
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPTkipAppendByte(
-	IN	PTKIP_KEY_INFO	pTkip,
-	IN	UCHAR 			uChar)
-{
-	// Append the byte to our word-sized buffer
-	pTkip->M |= (uChar << (8* pTkip->nBytesInM));
-	pTkip->nBytesInM++;
-	// Process the word if it is full.
-	if( pTkip->nBytesInM >= 4 )
-	{
-		pTkip->L ^= pTkip->M;
-		pTkip->R ^= ROL32( pTkip->L, 17 );
-		pTkip->L += pTkip->R;
-		pTkip->R ^= ((pTkip->L & 0xff00ff00) >> 8) | ((pTkip->L & 0x00ff00ff) << 8);
-		pTkip->L += pTkip->R;
-		pTkip->R ^= ROL32( pTkip->L, 3 );
-		pTkip->L += pTkip->R;
-		pTkip->R ^= ROR32( pTkip->L, 2 );
-		pTkip->L += pTkip->R;
-		// Clear the buffer
-		pTkip->M = 0;
-		pTkip->nBytesInM = 0;
-	}
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Calculate the MIC Value.
-
-	Arguments:
-      pAd		Pointer to our adapter
-      pSrc			Pointer to source data for Calculate MIC Value
-      Len			Indicate the length of the source data
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPTkipAppend(
-	IN	PTKIP_KEY_INFO	pTkip,
-	IN	PUCHAR			pSrc,
-	IN	UINT			nBytes)
-{
-	// This is simple
-	while(nBytes > 0)
-	{
-		RTMPTkipAppendByte(pTkip, *pSrc++);
-		nBytes--;
-	}
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Get the MIC Value.
-
-	Arguments:
-      pAd		Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-		the MIC Value is store in pAd->PrivateInfo.MIC
-	========================================================================
-*/
-VOID	RTMPTkipGetMIC(
-	IN	PTKIP_KEY_INFO	pTkip)
-{
-	// Append the minimum padding
-	RTMPTkipAppendByte(pTkip, 0x5a );
-	RTMPTkipAppendByte(pTkip, 0 );
-	RTMPTkipAppendByte(pTkip, 0 );
-	RTMPTkipAppendByte(pTkip, 0 );
-	RTMPTkipAppendByte(pTkip, 0 );
-	// and then zeroes until the length is a multiple of 4
-	while( pTkip->nBytesInM != 0 )
-	{
-		RTMPTkipAppendByte(pTkip, 0 );
-	}
-	// The appendByte function has already computed the result.
-	RTMPTkipPutUInt32(pTkip->MIC, pTkip->L);
-	RTMPTkipPutUInt32(pTkip->MIC + 4, pTkip->R);
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Init Tkip function.
-
-	Arguments:
-      pAd		Pointer to our adapter
-		pTKey       Pointer to the Temporal Key (TK), TK shall be 128bits.
-		KeyId		TK Key ID
-		pTA			Pointer to transmitter address
-		pMICKey		pointer to MIC Key
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPInitTkipEngine(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pKey,
-	IN	UCHAR			KeyId,
-	IN	PUCHAR			pTA,
-	IN	PUCHAR			pMICKey,
-	IN	PUCHAR			pTSC,
-	OUT	PULONG			pIV16,
-	OUT	PULONG			pIV32)
-{
-	TKIP_IV	tkipIv;
-
-	// Prepare 8 bytes TKIP encapsulation for MPDU
-	NdisZeroMemory(&tkipIv, sizeof(TKIP_IV));
-	tkipIv.IV16.field.rc0 = *(pTSC + 1);
-	tkipIv.IV16.field.rc1 = (tkipIv.IV16.field.rc0 | 0x20) & 0x7f;
-	tkipIv.IV16.field.rc2 = *pTSC;
-	tkipIv.IV16.field.CONTROL.field.ExtIV = 1;  // 0: non-extended IV, 1: an extended IV
-	tkipIv.IV16.field.CONTROL.field.KeyID = KeyId;
-//	tkipIv.IV32 = *(PULONG)(pTSC + 2);
-	NdisMoveMemory(&tkipIv.IV32, (pTSC + 2), 4);   // Copy IV
-
-	*pIV16 = tkipIv.IV16.word;
-	*pIV32 = tkipIv.IV32;
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Init MIC Value calculation function which include set MIC key &
-		calculate first 16 bytes (DA + SA + priority +  0)
-
-	Arguments:
-      pAd		Pointer to our adapter
-		pTKey       Pointer to the Temporal Key (TK), TK shall be 128bits.
-		pDA			Pointer to DA address
-		pSA			Pointer to SA address
-		pMICKey		pointer to MIC Key
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPInitMICEngine(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pKey,
-	IN	PUCHAR			pDA,
-	IN	PUCHAR			pSA,
-	IN  UCHAR           UserPriority,
-	IN	PUCHAR			pMICKey)
-{
-	ULONG Priority = UserPriority;
-
-	// Init MIC value calculation
-	RTMPTkipSetMICKey(&pAd->PrivateInfo.Tx, pMICKey);
-	// DA
-	RTMPTkipAppend(&pAd->PrivateInfo.Tx, pDA, MAC_ADDR_LEN);
-	// SA
-	RTMPTkipAppend(&pAd->PrivateInfo.Tx, pSA, MAC_ADDR_LEN);
-	// Priority + 3 bytes of 0
-	RTMPTkipAppend(&pAd->PrivateInfo.Tx, (PUCHAR)&Priority, 4);
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Compare MIC value of received MSDU
-
-	Arguments:
-		pAd	Pointer to our adapter
-		pSrc        Pointer to the received Plain text data
-		pDA			Pointer to DA address
-		pSA			Pointer to SA address
-		pMICKey		pointer to MIC Key
-		Len         the length of the received plain text data exclude MIC value
-
-	Return Value:
-		TRUE        MIC value matched
-		FALSE       MIC value mismatched
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-BOOLEAN	RTMPTkipCompareMICValue(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pSrc,
-	IN	PUCHAR			pDA,
-	IN	PUCHAR			pSA,
-	IN	PUCHAR			pMICKey,
-	IN	UCHAR			UserPriority,
-	IN	UINT			Len)
-{
-	UCHAR	OldMic[8];
-	ULONG	Priority = UserPriority;
-
-	// Init MIC value calculation
-	RTMPTkipSetMICKey(&pAd->PrivateInfo.Rx, pMICKey);
-	// DA
-	RTMPTkipAppend(&pAd->PrivateInfo.Rx, pDA, MAC_ADDR_LEN);
-	// SA
-	RTMPTkipAppend(&pAd->PrivateInfo.Rx, pSA, MAC_ADDR_LEN);
-	// Priority + 3 bytes of 0
-	RTMPTkipAppend(&pAd->PrivateInfo.Rx, (PUCHAR)&Priority, 4);
-
-	// Calculate MIC value from plain text data
-	RTMPTkipAppend(&pAd->PrivateInfo.Rx, pSrc, Len);
-
-	// Get MIC valude from received frame
-	NdisMoveMemory(OldMic, pSrc + Len, 8);
-
-	// Get MIC value from decrypted plain data
-	RTMPTkipGetMIC(&pAd->PrivateInfo.Rx);
-
-	// Move MIC value from MSDU, this steps should move to data path.
-	// Since the MIC value might cross MPDUs.
-	if(!NdisEqualMemory(pAd->PrivateInfo.Rx.MIC, OldMic, 8))
-	{
-		DBGPRINT_RAW(RT_DEBUG_ERROR, ("RTMPTkipCompareMICValue(): TKIP MIC Error !\n"));  //MIC error.
-
-
-		return (FALSE);
-	}
-	return (TRUE);
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Compare MIC value of received MSDU
-
-	Arguments:
-		pAd	Pointer to our adapter
-		pLLC		LLC header
-		pSrc        Pointer to the received Plain text data
-		pDA			Pointer to DA address
-		pSA			Pointer to SA address
-		pMICKey		pointer to MIC Key
-		Len         the length of the received plain text data exclude MIC value
-
-	Return Value:
-		TRUE        MIC value matched
-		FALSE       MIC value mismatched
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-BOOLEAN	RTMPTkipCompareMICValueWithLLC(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pLLC,
-	IN	PUCHAR			pSrc,
-	IN	PUCHAR			pDA,
-	IN	PUCHAR			pSA,
-	IN	PUCHAR			pMICKey,
-	IN	UINT			Len)
-{
-	UCHAR	OldMic[8];
-	ULONG	Priority = 0;
-
-	// Init MIC value calculation
-	RTMPTkipSetMICKey(&pAd->PrivateInfo.Rx, pMICKey);
-	// DA
-	RTMPTkipAppend(&pAd->PrivateInfo.Rx, pDA, MAC_ADDR_LEN);
-	// SA
-	RTMPTkipAppend(&pAd->PrivateInfo.Rx, pSA, MAC_ADDR_LEN);
-	// Priority + 3 bytes of 0
-	RTMPTkipAppend(&pAd->PrivateInfo.Rx, (PUCHAR)&Priority, 4);
-
-	// Start with LLC header
-	RTMPTkipAppend(&pAd->PrivateInfo.Rx, pLLC, 8);
-
-	// Calculate MIC value from plain text data
-	RTMPTkipAppend(&pAd->PrivateInfo.Rx, pSrc, Len);
-
-	// Get MIC valude from received frame
-	NdisMoveMemory(OldMic, pSrc + Len, 8);
-
-	// Get MIC value from decrypted plain data
-	RTMPTkipGetMIC(&pAd->PrivateInfo.Rx);
-
-	// Move MIC value from MSDU, this steps should move to data path.
-	// Since the MIC value might cross MPDUs.
-	if(!NdisEqualMemory(pAd->PrivateInfo.Rx.MIC, OldMic, 8))
-	{
-		DBGPRINT_RAW(RT_DEBUG_ERROR, ("RTMPTkipCompareMICValueWithLLC(): TKIP MIC Error !\n"));  //MIC error.
-
-
-		return (FALSE);
-	}
-	return (TRUE);
-}
-/*
-	========================================================================
-
-	Routine	Description:
-		Copy frame from waiting queue into relative ring buffer and set
-	appropriate ASIC register to kick hardware transmit function
-
-	Arguments:
-		pAd		Pointer	to our adapter
-		PNDIS_PACKET	Pointer to Ndis Packet for MIC calculation
-		pEncap			Pointer to LLC encap data
-		LenEncap		Total encap length, might be 0 which indicates no encap
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPCalculateMICValue(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket,
-	IN	PUCHAR			pEncap,
-	IN	PCIPHER_KEY		pKey,
-	IN	UCHAR			apidx)
-{
-	PACKET_INFO		PacketInfo;
-	PUCHAR			pSrcBufVA;
-	UINT			SrcBufLen;
-	PUCHAR			pSrc;
-    UCHAR           UserPriority;
-	UCHAR			vlan_offset = 0;
-
-	RTMP_QueryPacketInfo(pPacket, &PacketInfo, &pSrcBufVA, &SrcBufLen);
-
-	UserPriority = RTMP_GET_PACKET_UP(pPacket);
-	pSrc = pSrcBufVA;
-
-	// determine if this is a vlan packet
-	if (((*(pSrc + 12) << 8) + *(pSrc + 13)) == 0x8100)
-		vlan_offset = 4;
-
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-	{
-		RTMPInitMICEngine(
-			pAd,
-			pKey->Key,
-			pSrc,
-			pSrc + 6,
-			UserPriority,
-			pKey->TxMic);
-	}
-
-
-	if (pEncap != NULL)
-	{
-		// LLC encapsulation
-		RTMPTkipAppend(&pAd->PrivateInfo.Tx, pEncap, 6);
-		// Protocol Type
-		RTMPTkipAppend(&pAd->PrivateInfo.Tx, pSrc + 12 + vlan_offset, 2);
-	}
-	SrcBufLen -= (14 + vlan_offset);
-	pSrc += (14 + vlan_offset);
-	do
-	{
-		if (SrcBufLen > 0)
-		{
-			RTMPTkipAppend(&pAd->PrivateInfo.Tx, pSrc, SrcBufLen);
-		}
-
-		break;	// No need handle next packet
-
-	}	while (TRUE);		// End of copying payload
-
-	// Compute the final MIC Value
-	RTMPTkipGetMIC(&pAd->PrivateInfo.Tx);
-}
-
-
-/************************************************************/
-/* tkip_sbox()																*/
-/* Returns a 16 bit value from a 64K entry table. The Table */
-/* is synthesized from two 256 entry byte wide tables.		*/
-/************************************************************/
-
-UINT tkip_sbox(UINT index)
-{
-	UINT index_low;
-	UINT index_high;
-	UINT left, right;
-
-	index_low = (index % 256);
-	index_high = ((index >> 8) % 256);
-
-	left = Tkip_Sbox_Lower[index_low] + (Tkip_Sbox_Upper[index_low] * 256);
-	right = Tkip_Sbox_Upper[index_high] + (Tkip_Sbox_Lower[index_high] * 256);
-
-	return (left ^ right);
-}
-
-UINT rotr1(UINT a)
-{
-	unsigned int b;
-
-	if ((a & 0x01) == 0x01)
-	{
-		b = (a >> 1) | 0x8000;
-	}
-	else
-	{
-		b = (a >> 1) & 0x7fff;
-	}
-	b = b % 65536;
-	return b;
-}
-
-VOID RTMPTkipMixKey(
-	UCHAR *key,
-	UCHAR *ta,
-	ULONG pnl, /* Least significant 16 bits of PN */
-	ULONG pnh, /* Most significant 32 bits of PN */
-	UCHAR *rc4key,
-	UINT *p1k)
-{
-
-	UINT tsc0;
-	UINT tsc1;
-	UINT tsc2;
-
-	UINT ppk0;
-	UINT ppk1;
-	UINT ppk2;
-	UINT ppk3;
-	UINT ppk4;
-	UINT ppk5;
-
-	INT i;
-	INT j;
-
-	tsc0 = (unsigned int)((pnh >> 16) % 65536); /* msb */
-	tsc1 = (unsigned int)(pnh % 65536);
-	tsc2 = (unsigned int)(pnl % 65536); /* lsb */
-
-	/* Phase 1, step 1 */
-	p1k[0] = tsc1;
-	p1k[1] = tsc0;
-	p1k[2] = (UINT)(ta[0] + (ta[1]*256));
-	p1k[3] = (UINT)(ta[2] + (ta[3]*256));
-	p1k[4] = (UINT)(ta[4] + (ta[5]*256));
-
-	/* Phase 1, step 2 */
-	for (i=0; i<8; i++)
-	{
-		j = 2*(i & 1);
-		p1k[0] = (p1k[0] + tkip_sbox( (p1k[4] ^ ((256*key[1+j]) + key[j])) % 65536 )) % 65536;
-		p1k[1] = (p1k[1] + tkip_sbox( (p1k[0] ^ ((256*key[5+j]) + key[4+j])) % 65536 )) % 65536;
-		p1k[2] = (p1k[2] + tkip_sbox( (p1k[1] ^ ((256*key[9+j]) + key[8+j])) % 65536 )) % 65536;
-		p1k[3] = (p1k[3] + tkip_sbox( (p1k[2] ^ ((256*key[13+j]) + key[12+j])) % 65536 )) % 65536;
-		p1k[4] = (p1k[4] + tkip_sbox( (p1k[3] ^ (((256*key[1+j]) + key[j]))) % 65536 )) % 65536;
-		p1k[4] = (p1k[4] + i) % 65536;
-	}
-
-	/* Phase 2, Step 1 */
-	ppk0 = p1k[0];
-	ppk1 = p1k[1];
-	ppk2 = p1k[2];
-	ppk3 = p1k[3];
-	ppk4 = p1k[4];
-	ppk5 = (p1k[4] + tsc2) % 65536;
-
-	/* Phase2, Step 2 */
-	ppk0 = ppk0 + tkip_sbox( (ppk5 ^ ((256*key[1]) + key[0])) % 65536);
-	ppk1 = ppk1 + tkip_sbox( (ppk0 ^ ((256*key[3]) + key[2])) % 65536);
-	ppk2 = ppk2 + tkip_sbox( (ppk1 ^ ((256*key[5]) + key[4])) % 65536);
-	ppk3 = ppk3 + tkip_sbox( (ppk2 ^ ((256*key[7]) + key[6])) % 65536);
-	ppk4 = ppk4 + tkip_sbox( (ppk3 ^ ((256*key[9]) + key[8])) % 65536);
-	ppk5 = ppk5 + tkip_sbox( (ppk4 ^ ((256*key[11]) + key[10])) % 65536);
-
-	ppk0 = ppk0 + rotr1(ppk5 ^ ((256*key[13]) + key[12]));
-	ppk1 = ppk1 + rotr1(ppk0 ^ ((256*key[15]) + key[14]));
-	ppk2 = ppk2 + rotr1(ppk1);
-	ppk3 = ppk3 + rotr1(ppk2);
-	ppk4 = ppk4 + rotr1(ppk3);
-	ppk5 = ppk5 + rotr1(ppk4);
-
-	/* Phase 2, Step 3 */
-    /* Phase 2, Step 3 */
-
-	tsc0 = (unsigned int)((pnh >> 16) % 65536); /* msb */
-	tsc1 = (unsigned int)(pnh % 65536);
-	tsc2 = (unsigned int)(pnl % 65536); /* lsb */
-
-	rc4key[0] = (tsc2 >> 8) % 256;
-	rc4key[1] = (((tsc2 >> 8) % 256) | 0x20) & 0x7f;
-	rc4key[2] = tsc2 % 256;
-	rc4key[3] = ((ppk5 ^ ((256*key[1]) + key[0])) >> 1) % 256;
-
-	rc4key[4] = ppk0 % 256;
-	rc4key[5] = (ppk0 >> 8) % 256;
-
-	rc4key[6] = ppk1 % 256;
-	rc4key[7] = (ppk1 >> 8) % 256;
-
-	rc4key[8] = ppk2 % 256;
-	rc4key[9] = (ppk2 >> 8) % 256;
-
-	rc4key[10] = ppk3 % 256;
-	rc4key[11] = (ppk3 >> 8) % 256;
-
-	rc4key[12] = ppk4 % 256;
-	rc4key[13] = (ppk4 >> 8) % 256;
-
-	rc4key[14] = ppk5 % 256;
-	rc4key[15] = (ppk5 >> 8) % 256;
-}
-
-
-/************************************************/
-/* construct_mic_header1()                      */
-/* Builds the first MIC header block from       */
-/* header fields.                               */
-/************************************************/
-
-void construct_mic_header1(
-	unsigned char *mic_header1,
-	int header_length,
-	unsigned char *mpdu)
-{
-	mic_header1[0] = (unsigned char)((header_length - 2) / 256);
-	mic_header1[1] = (unsigned char)((header_length - 2) % 256);
-	mic_header1[2] = mpdu[0] & 0xcf;    /* Mute CF poll & CF ack bits */
-	mic_header1[3] = mpdu[1] & 0xc7;    /* Mute retry, more data and pwr mgt bits */
-	mic_header1[4] = mpdu[4];       /* A1 */
-	mic_header1[5] = mpdu[5];
-	mic_header1[6] = mpdu[6];
-	mic_header1[7] = mpdu[7];
-	mic_header1[8] = mpdu[8];
-	mic_header1[9] = mpdu[9];
-	mic_header1[10] = mpdu[10];     /* A2 */
-	mic_header1[11] = mpdu[11];
-	mic_header1[12] = mpdu[12];
-	mic_header1[13] = mpdu[13];
-	mic_header1[14] = mpdu[14];
-	mic_header1[15] = mpdu[15];
-}
-
-/************************************************/
-/* construct_mic_header2()                      */
-/* Builds the last MIC header block from        */
-/* header fields.                               */
-/************************************************/
-
-void construct_mic_header2(
-	unsigned char *mic_header2,
-	unsigned char *mpdu,
-	int a4_exists,
-	int qc_exists)
-{
-	int i;
-
-	for (i = 0; i<16; i++) mic_header2[i]=0x00;
-
-	mic_header2[0] = mpdu[16];    /* A3 */
-	mic_header2[1] = mpdu[17];
-	mic_header2[2] = mpdu[18];
-	mic_header2[3] = mpdu[19];
-	mic_header2[4] = mpdu[20];
-	mic_header2[5] = mpdu[21];
-
-	// In Sequence Control field, mute sequence numer bits (12-bit)
-	mic_header2[6] = mpdu[22] & 0x0f;   /* SC */
-	mic_header2[7] = 0x00; /* mpdu[23]; */
-
-	if ((!qc_exists) & a4_exists)
-	{
-		for (i=0;i<6;i++) mic_header2[8+i] = mpdu[24+i];   /* A4 */
-
-	}
-
-	if (qc_exists && (!a4_exists))
-	{
-		mic_header2[8] = mpdu[24] & 0x0f; /* mute bits 15 - 4 */
-		mic_header2[9] = mpdu[25] & 0x00;
-	}
-
-	if (qc_exists && a4_exists)
-	{
-		for (i=0;i<6;i++) mic_header2[8+i] = mpdu[24+i];   /* A4 */
-
-		mic_header2[14] = mpdu[30] & 0x0f;
-		mic_header2[15] = mpdu[31] & 0x00;
-	}
-}
-
-
-/************************************************/
-/* construct_mic_iv()                           */
-/* Builds the MIC IV from header fields and PN  */
-/************************************************/
-
-void construct_mic_iv(
-	unsigned char *mic_iv,
-	int qc_exists,
-	int a4_exists,
-	unsigned char *mpdu,
-	unsigned int payload_length,
-	unsigned char *pn_vector)
-{
-	int i;
-
-	mic_iv[0] = 0x59;
-	if (qc_exists && a4_exists)
-		mic_iv[1] = mpdu[30] & 0x0f;    /* QoS_TC           */
-	if (qc_exists && !a4_exists)
-		mic_iv[1] = mpdu[24] & 0x0f;   /* mute bits 7-4    */
-	if (!qc_exists)
-		mic_iv[1] = 0x00;
-	for (i = 2; i < 8; i++)
-		mic_iv[i] = mpdu[i + 8];                    /* mic_iv[2:7] = A2[0:5] = mpdu[10:15] */
-#ifdef CONSISTENT_PN_ORDER
-		for (i = 8; i < 14; i++)
-			mic_iv[i] = pn_vector[i - 8];           /* mic_iv[8:13] = PN[0:5] */
-#else
-		for (i = 8; i < 14; i++)
-			mic_iv[i] = pn_vector[13 - i];          /* mic_iv[8:13] = PN[5:0] */
-#endif
-	i = (payload_length / 256);
-	i = (payload_length % 256);
-	mic_iv[14] = (unsigned char) (payload_length / 256);
-	mic_iv[15] = (unsigned char) (payload_length % 256);
-
-}
-
-
-
-/************************************/
-/* bitwise_xor()                    */
-/* A 128 bit, bitwise exclusive or  */
-/************************************/
-
-void bitwise_xor(unsigned char *ina, unsigned char *inb, unsigned char *out)
-{
-	int i;
-	for (i=0; i<16; i++)
-	{
-		out[i] = ina[i] ^ inb[i];
-	}
-}
-
-
-void aes128k128d(unsigned char *key, unsigned char *data, unsigned char *ciphertext)
-{
-	int round;
-	int i;
-	unsigned char intermediatea[16];
-	unsigned char intermediateb[16];
-	unsigned char round_key[16];
-
-	for(i=0; i<16; i++) round_key[i] = key[i];
-
-	for (round = 0; round < 11; round++)
-	{
-		if (round == 0)
-		{
-			xor_128(round_key, data, ciphertext);
-			next_key(round_key, round);
-		}
-		else if (round == 10)
-		{
-			byte_sub(ciphertext, intermediatea);
-			shift_row(intermediatea, intermediateb);
-			xor_128(intermediateb, round_key, ciphertext);
-		}
-		else    /* 1 - 9 */
-		{
-			byte_sub(ciphertext, intermediatea);
-			shift_row(intermediatea, intermediateb);
-			mix_column(&intermediateb[0], &intermediatea[0]);
-			mix_column(&intermediateb[4], &intermediatea[4]);
-			mix_column(&intermediateb[8], &intermediatea[8]);
-			mix_column(&intermediateb[12], &intermediatea[12]);
-			xor_128(intermediatea, round_key, ciphertext);
-			next_key(round_key, round);
-		}
-	}
-
-}
-
-void construct_ctr_preload(
-	unsigned char *ctr_preload,
-	int a4_exists,
-	int qc_exists,
-	unsigned char *mpdu,
-	unsigned char *pn_vector,
-	int c)
-{
-
-	int i = 0;
-	for (i=0; i<16; i++) ctr_preload[i] = 0x00;
-	i = 0;
-
-	ctr_preload[0] = 0x01;                                  /* flag */
-	if (qc_exists && a4_exists) ctr_preload[1] = mpdu[30] & 0x0f;   /* QoC_Control  */
-	if (qc_exists && !a4_exists) ctr_preload[1] = mpdu[24] & 0x0f;
-
-	for (i = 2; i < 8; i++)
-		ctr_preload[i] = mpdu[i + 8];                       /* ctr_preload[2:7] = A2[0:5] = mpdu[10:15] */
-#ifdef CONSISTENT_PN_ORDER
-	  for (i = 8; i < 14; i++)
-			ctr_preload[i] =    pn_vector[i - 8];           /* ctr_preload[8:13] = PN[0:5] */
-#else
-	  for (i = 8; i < 14; i++)
-			ctr_preload[i] =    pn_vector[13 - i];          /* ctr_preload[8:13] = PN[5:0] */
-#endif
-	ctr_preload[14] =  (unsigned char) (c / 256); // Ctr
-	ctr_preload[15] =  (unsigned char) (c % 256);
-
-}
-
-
-//
-// TRUE: Success!
-// FALSE: Decrypt Error!
-//
-BOOLEAN RTMPSoftDecryptTKIP(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR	pData,
-	IN ULONG	DataByteCnt,
-	IN UCHAR    UserPriority,
-	IN PCIPHER_KEY	pWpaKey)
-{
-	UCHAR			KeyID;
-	UINT			HeaderLen;
-    UCHAR			fc0;
-	UCHAR			fc1;
-	USHORT			fc;
-	UINT			frame_type;
-	UINT			frame_subtype;
-    UINT			from_ds;
-    UINT			to_ds;
-	INT				a4_exists;
-	INT				qc_exists;
-	USHORT			duration;
-	USHORT			seq_control;
-	USHORT			qos_control;
-	UCHAR			TA[MAC_ADDR_LEN];
-	UCHAR			DA[MAC_ADDR_LEN];
-	UCHAR			SA[MAC_ADDR_LEN];
-	UCHAR			RC4Key[16];
-	UINT			p1k[5]; //for mix_key;
-	ULONG			pnl;/* Least significant 16 bits of PN */
-	ULONG			pnh;/* Most significant 32 bits of PN */
-	UINT			num_blocks;
-	UINT			payload_remainder;
-	ARCFOURCONTEXT 	ArcFourContext;
-	UINT			crc32 = 0;
-	UINT			trailfcs = 0;
-	UCHAR			MIC[8];
-	UCHAR			TrailMIC[8];
-
-#ifdef RT_BIG_ENDIAN
-	RTMPFrameEndianChange(pAd, (PUCHAR)pData, DIR_READ, FALSE);
-#endif
-
-	fc0 = *pData;
-	fc1 = *(pData + 1);
-
-	fc = *((PUSHORT)pData);
-
-	frame_type = ((fc0 >> 2) & 0x03);
-	frame_subtype = ((fc0 >> 4) & 0x0f);
-
-    from_ds = (fc1 & 0x2) >> 1;
-    to_ds = (fc1 & 0x1);
-
-    a4_exists = (from_ds & to_ds);
-    qc_exists = ((frame_subtype == 0x08) ||    /* Assumed QoS subtypes */
-                  (frame_subtype == 0x09) ||   /* Likely to change.    */
-                  (frame_subtype == 0x0a) ||
-                  (frame_subtype == 0x0b)
-                 );
-
-	HeaderLen = 24;
-	if (a4_exists)
-		HeaderLen += 6;
-
-	KeyID = *((PUCHAR)(pData+ HeaderLen + 3));
-	KeyID = KeyID >> 6;
-
-	if (pWpaKey[KeyID].KeyLen == 0)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("RTMPSoftDecryptTKIP failed!(KeyID[%d] Length can not be 0)\n", KeyID));
-		return FALSE;
-	}
-
-	duration = *((PUSHORT)(pData+2));
-
-	seq_control = *((PUSHORT)(pData+22));
-
-	if (qc_exists)
-	{
-		if (a4_exists)
-		{
-			qos_control = *((PUSHORT)(pData+30));
-		}
-		else
-		{
-			qos_control = *((PUSHORT)(pData+24));
-		}
-	}
-
-	if (to_ds == 0 && from_ds == 1)
-	{
-		NdisMoveMemory(DA, pData+4, MAC_ADDR_LEN);
-		NdisMoveMemory(SA, pData+16, MAC_ADDR_LEN);
-		NdisMoveMemory(TA, pData+10, MAC_ADDR_LEN);  //BSSID
-	}
-	else if (to_ds == 0 && from_ds == 0 )
-	{
-		NdisMoveMemory(TA, pData+10, MAC_ADDR_LEN);
-		NdisMoveMemory(DA, pData+4, MAC_ADDR_LEN);
-		NdisMoveMemory(SA, pData+10, MAC_ADDR_LEN);
-	}
-	else if (to_ds == 1 && from_ds == 0)
-	{
-		NdisMoveMemory(SA, pData+10, MAC_ADDR_LEN);
-		NdisMoveMemory(TA, pData+10, MAC_ADDR_LEN);
-		NdisMoveMemory(DA, pData+16, MAC_ADDR_LEN);
-	}
-	else if (to_ds == 1 && from_ds == 1)
-	{
-		NdisMoveMemory(TA, pData+10, MAC_ADDR_LEN);
-		NdisMoveMemory(DA, pData+16, MAC_ADDR_LEN);
-		NdisMoveMemory(SA, pData+22, MAC_ADDR_LEN);
-	}
-
-	num_blocks = (DataByteCnt - 16) / 16;
-	payload_remainder = (DataByteCnt - 16) % 16;
-
-	pnl = (*(pData + HeaderLen)) * 256 + *(pData + HeaderLen + 2);
-	pnh = *((PULONG)(pData + HeaderLen + 4));
-	pnh = cpu2le32(pnh);
-	RTMPTkipMixKey(pWpaKey[KeyID].Key, TA, pnl, pnh, RC4Key, p1k);
-
-	ARCFOUR_INIT(&ArcFourContext, RC4Key, 16);
-
-	ARCFOUR_DECRYPT(&ArcFourContext, pData + HeaderLen, pData + HeaderLen + 8, DataByteCnt - HeaderLen - 8);
-	NdisMoveMemory(&trailfcs, pData + DataByteCnt - 8 - 4, 4);
-	crc32 = RTMP_CALC_FCS32(PPPINITFCS32, pData + HeaderLen, DataByteCnt - HeaderLen - 8 - 4);  //Skip IV+EIV 8 bytes & Skip last 4 bytes(FCS).
-	crc32 ^= 0xffffffff;             /* complement */
-
-    if(crc32 != cpu2le32(trailfcs))
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("RTMPSoftDecryptTKIP, WEP Data ICV Error !\n"));	 //ICV error.
-
-		return (FALSE);
-	}
-
-	NdisMoveMemory(TrailMIC, pData + DataByteCnt - 8 - 8 - 4, 8);
-	RTMPInitMICEngine(pAd, pWpaKey[KeyID].Key, DA, SA, UserPriority, pWpaKey[KeyID].RxMic);
-	RTMPTkipAppend(&pAd->PrivateInfo.Tx, pData + HeaderLen, DataByteCnt - HeaderLen - 8 - 12);
-	RTMPTkipGetMIC(&pAd->PrivateInfo.Tx);
-	NdisMoveMemory(MIC, pAd->PrivateInfo.Tx.MIC, 8);
-
-	if (!NdisEqualMemory(MIC, TrailMIC, 8))
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("RTMPSoftDecryptTKIP, WEP Data MIC Error !\n"));	 //MIC error.
-		//RTMPReportMicError(pAd, &pWpaKey[KeyID]);	// marked by AlbertY @ 20060630
-		return (FALSE);
-	}
-
-#ifdef RT_BIG_ENDIAN
-	RTMPFrameEndianChange(pAd, (PUCHAR)pData, DIR_READ, FALSE);
-#endif
-	//DBGPRINT(RT_DEBUG_TRACE, "RTMPSoftDecryptTKIP Decript done!!\n");
-	return TRUE;
-}
-
-
-
-
-BOOLEAN RTMPSoftDecryptAES(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR	pData,
-	IN ULONG	DataByteCnt,
-	IN PCIPHER_KEY	pWpaKey)
-{
-	UCHAR			KeyID;
-	UINT			HeaderLen;
-	UCHAR			PN[6];
-	UINT			payload_len;
-	UINT			num_blocks;
-	UINT			payload_remainder;
-	USHORT			fc;
-	UCHAR			fc0;
-	UCHAR			fc1;
-	UINT			frame_type;
-	UINT			frame_subtype;
-	UINT			from_ds;
-	UINT			to_ds;
-	INT				a4_exists;
-	INT				qc_exists;
-	UCHAR			aes_out[16];
-	int 			payload_index;
-	UINT 			i;
-	UCHAR 			ctr_preload[16];
-	UCHAR 			chain_buffer[16];
-	UCHAR 			padded_buffer[16];
-	UCHAR 			mic_iv[16];
-	UCHAR 			mic_header1[16];
-	UCHAR 			mic_header2[16];
-	UCHAR			MIC[8];
-	UCHAR			TrailMIC[8];
-
-#ifdef RT_BIG_ENDIAN
-	RTMPFrameEndianChange(pAd, (PUCHAR)pData, DIR_READ, FALSE);
-#endif
-
-	fc0 = *pData;
-	fc1 = *(pData + 1);
-
-	fc = *((PUSHORT)pData);
-
-	frame_type = ((fc0 >> 2) & 0x03);
-	frame_subtype = ((fc0 >> 4) & 0x0f);
-
-	from_ds = (fc1 & 0x2) >> 1;
-	to_ds = (fc1 & 0x1);
-
-	a4_exists = (from_ds & to_ds);
-	qc_exists = ((frame_subtype == 0x08) ||    /* Assumed QoS subtypes */
-				  (frame_subtype == 0x09) ||   /* Likely to change.    */
-				  (frame_subtype == 0x0a) ||
-				  (frame_subtype == 0x0b)
-				 );
-
-	HeaderLen = 24;
-	if (a4_exists)
-		HeaderLen += 6;
-
-	KeyID = *((PUCHAR)(pData+ HeaderLen + 3));
-	KeyID = KeyID >> 6;
-
-	if (pWpaKey[KeyID].KeyLen == 0)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("RTMPSoftDecryptAES failed!(KeyID[%d] Length can not be 0)\n", KeyID));
-		return FALSE;
-	}
-
-	PN[0] = *(pData+ HeaderLen);
-	PN[1] = *(pData+ HeaderLen + 1);
-	PN[2] = *(pData+ HeaderLen + 4);
-	PN[3] = *(pData+ HeaderLen + 5);
-	PN[4] = *(pData+ HeaderLen + 6);
-	PN[5] = *(pData+ HeaderLen + 7);
-
-	payload_len = DataByteCnt - HeaderLen - 8 - 8;	// 8 bytes for CCMP header , 8 bytes for MIC
-	payload_remainder = (payload_len) % 16;
-	num_blocks = (payload_len) / 16;
-
-
-
-	// Find start of payload
-	payload_index = HeaderLen + 8; //IV+EIV
-
-	for (i=0; i< num_blocks; i++)
-	{
-		construct_ctr_preload(ctr_preload,
-								a4_exists,
-								qc_exists,
-								pData,
-								PN,
-								i+1 );
-
-		aes128k128d(pWpaKey[KeyID].Key, ctr_preload, aes_out);
-
-		bitwise_xor(aes_out, pData + payload_index, chain_buffer);
-		NdisMoveMemory(pData + payload_index - 8, chain_buffer, 16);
-		payload_index += 16;
-	}
-
-	//
-	// If there is a short final block, then pad it
-	// encrypt it and copy the unpadded part back
-	//
-	if (payload_remainder > 0)
-	{
-		construct_ctr_preload(ctr_preload,
-								a4_exists,
-								qc_exists,
-								pData,
-								PN,
-								num_blocks + 1);
-
-		NdisZeroMemory(padded_buffer, 16);
-		NdisMoveMemory(padded_buffer, pData + payload_index, payload_remainder);
-
-		aes128k128d(pWpaKey[KeyID].Key, ctr_preload, aes_out);
-
-		bitwise_xor(aes_out, padded_buffer, chain_buffer);
-		NdisMoveMemory(pData + payload_index - 8, chain_buffer, payload_remainder);
-		payload_index += payload_remainder;
-	}
-
-	//
-	// Descrypt the MIC
-	//
-	construct_ctr_preload(ctr_preload,
-							a4_exists,
-							qc_exists,
-							pData,
-							PN,
-							0);
-	NdisZeroMemory(padded_buffer, 16);
-	NdisMoveMemory(padded_buffer, pData + payload_index, 8);
-
-	aes128k128d(pWpaKey[KeyID].Key, ctr_preload, aes_out);
-
-	bitwise_xor(aes_out, padded_buffer, chain_buffer);
-
-	NdisMoveMemory(TrailMIC, chain_buffer, 8);
-
-	//
-	// Calculate MIC
-	//
-
-	//Force the protected frame bit on
-	*(pData + 1) = *(pData + 1) | 0x40;
-
-	// Find start of payload
-	// Because the CCMP header has been removed
-	payload_index = HeaderLen;
-
-	construct_mic_iv(
-					mic_iv,
-					qc_exists,
-					a4_exists,
-					pData,
-					payload_len,
-					PN);
-
-	construct_mic_header1(
-						mic_header1,
-						HeaderLen,
-						pData);
-
-	construct_mic_header2(
-						mic_header2,
-						pData,
-						a4_exists,
-						qc_exists);
-
-	aes128k128d(pWpaKey[KeyID].Key, mic_iv, aes_out);
-	bitwise_xor(aes_out, mic_header1, chain_buffer);
-	aes128k128d(pWpaKey[KeyID].Key, chain_buffer, aes_out);
-	bitwise_xor(aes_out, mic_header2, chain_buffer);
-	aes128k128d(pWpaKey[KeyID].Key, chain_buffer, aes_out);
-
-	// iterate through each 16 byte payload block
-	for (i = 0; i < num_blocks; i++)
-	{
-		bitwise_xor(aes_out, pData + payload_index, chain_buffer);
-		payload_index += 16;
-		aes128k128d(pWpaKey[KeyID].Key, chain_buffer, aes_out);
-	}
-
-	// Add on the final payload block if it needs padding
-	if (payload_remainder > 0)
-	{
-		NdisZeroMemory(padded_buffer, 16);
-		NdisMoveMemory(padded_buffer, pData + payload_index, payload_remainder);
-
-		bitwise_xor(aes_out, padded_buffer, chain_buffer);
-		aes128k128d(pWpaKey[KeyID].Key, chain_buffer, aes_out);
-	}
-
-	// aes_out contains padded mic, discard most significant
-	// 8 bytes to generate 64 bit MIC
-	for (i = 0 ; i < 8; i++) MIC[i] = aes_out[i];
-
-	if (!NdisEqualMemory(MIC, TrailMIC, 8))
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("RTMPSoftDecryptAES, MIC Error !\n"));	 //MIC error.
-		return FALSE;
-	}
-
-#ifdef RT_BIG_ENDIAN
-	RTMPFrameEndianChange(pAd, (PUCHAR)pData, DIR_READ, FALSE);
-#endif
-
-	return TRUE;
-}
-
-/****************************************/
-/* aes128k128d()                        */
-/* Performs a 128 bit AES encrypt with  */
-/* 128 bit data.                        */
-/****************************************/
-VOID xor_128(
-	IN  PUCHAR  a,
-	IN  PUCHAR  b,
-	OUT PUCHAR  out)
-{
-	INT i;
-
-	for (i=0;i<16; i++)
-	{
-		out[i] = a[i] ^ b[i];
-	}
-}
-
-VOID next_key(
-	IN  PUCHAR  key,
-	IN  INT     round)
-{
-	UCHAR       rcon;
-	UCHAR       sbox_key[4];
-	UCHAR       rcon_table[12] =
-	{
-		0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80,
-		0x1b, 0x36, 0x36, 0x36
-	};
-
-	sbox_key[0] = RTMPCkipSbox(key[13]);
-	sbox_key[1] = RTMPCkipSbox(key[14]);
-	sbox_key[2] = RTMPCkipSbox(key[15]);
-	sbox_key[3] = RTMPCkipSbox(key[12]);
-
-	rcon = rcon_table[round];
-
-	xor_32(&key[0], sbox_key, &key[0]);
-	key[0] = key[0] ^ rcon;
-
-	xor_32(&key[4], &key[0], &key[4]);
-	xor_32(&key[8], &key[4], &key[8]);
-	xor_32(&key[12], &key[8], &key[12]);
-}
-
-VOID xor_32(
-	IN  PUCHAR  a,
-	IN  PUCHAR  b,
-	OUT PUCHAR  out)
-{
-	INT i;
-
-	for (i=0;i<4; i++)
-	{
-		out[i] = a[i] ^ b[i];
-	}
-}
-
-VOID byte_sub(
-	IN  PUCHAR  in,
-	OUT PUCHAR  out)
-{
-	INT i;
-
-	for (i=0; i< 16; i++)
-	{
-		out[i] = RTMPCkipSbox(in[i]);
-	}
-}
-
-UCHAR RTMPCkipSbox(
-	IN  UCHAR   a)
-{
-	return SboxTable[(int)a];
-}
-
-VOID shift_row(
-	IN  PUCHAR  in,
-	OUT PUCHAR  out)
-{
-	out[0] =  in[0];
-	out[1] =  in[5];
-	out[2] =  in[10];
-	out[3] =  in[15];
-	out[4] =  in[4];
-	out[5] =  in[9];
-	out[6] =  in[14];
-	out[7] =  in[3];
-	out[8] =  in[8];
-	out[9] =  in[13];
-	out[10] = in[2];
-	out[11] = in[7];
-	out[12] = in[12];
-	out[13] = in[1];
-	out[14] = in[6];
-	out[15] = in[11];
-}
-
-VOID mix_column(
-	IN  PUCHAR  in,
-	OUT PUCHAR  out)
-{
-	INT         i;
-	UCHAR       add1b[4];
-	UCHAR       add1bf7[4];
-	UCHAR       rotl[4];
-	UCHAR       swap_halfs[4];
-	UCHAR       andf7[4];
-	UCHAR       rotr[4];
-	UCHAR       temp[4];
-	UCHAR       tempb[4];
-
-	for (i=0 ; i<4; i++)
-	{
-		if ((in[i] & 0x80)== 0x80)
-			add1b[i] = 0x1b;
-		else
-			add1b[i] = 0x00;
-	}
-
-	swap_halfs[0] = in[2];    /* Swap halfs */
-	swap_halfs[1] = in[3];
-	swap_halfs[2] = in[0];
-	swap_halfs[3] = in[1];
-
-	rotl[0] = in[3];        /* Rotate left 8 bits */
-	rotl[1] = in[0];
-	rotl[2] = in[1];
-	rotl[3] = in[2];
-
-	andf7[0] = in[0] & 0x7f;
-	andf7[1] = in[1] & 0x7f;
-	andf7[2] = in[2] & 0x7f;
-	andf7[3] = in[3] & 0x7f;
-
-	for (i = 3; i>0; i--)    /* logical shift left 1 bit */
-	{
-		andf7[i] = andf7[i] << 1;
-		if ((andf7[i-1] & 0x80) == 0x80)
-		{
-			andf7[i] = (andf7[i] | 0x01);
-		}
-	}
-	andf7[0] = andf7[0] << 1;
-	andf7[0] = andf7[0] & 0xfe;
-
-	xor_32(add1b, andf7, add1bf7);
-
-	xor_32(in, add1bf7, rotr);
-
-	temp[0] = rotr[0];         /* Rotate right 8 bits */
-	rotr[0] = rotr[1];
-	rotr[1] = rotr[2];
-	rotr[2] = rotr[3];
-	rotr[3] = temp[0];
-
-	xor_32(add1bf7, rotr, temp);
-	xor_32(swap_halfs, rotl,tempb);
-	xor_32(temp, tempb, out);
-}
-
+#include "../../rt2860/common/rtmp_tkip.c"
diff --git a/drivers/staging/rt2870/common/rtmp_wep.c b/drivers/staging/rt2870/common/rtmp_wep.c
index 62f9e58729d..ae255adc9f7 100644
--- a/drivers/staging/rt2870/common/rtmp_wep.c
+++ b/drivers/staging/rt2870/common/rtmp_wep.c
@@ -1,508 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	rtmp_wep.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Paul Wu		10-28-02		Initial
-*/
-
-#include "../rt_config.h"
-
-UINT FCSTAB_32[256] =
-{
-	0x00000000, 0x77073096, 0xee0e612c, 0x990951ba,
-	0x076dc419, 0x706af48f, 0xe963a535, 0x9e6495a3,
-	0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988,
-	0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91,
-	0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de,
-	0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
-	0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec,
-	0x14015c4f, 0x63066cd9, 0xfa0f3d63, 0x8d080df5,
-	0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172,
-	0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b,
-	0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940,
-	0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
-	0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116,
-	0x21b4f4b5, 0x56b3c423, 0xcfba9599, 0xb8bda50f,
-	0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
-	0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d,
-	0x76dc4190, 0x01db7106, 0x98d220bc, 0xefd5102a,
-	0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
-	0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818,
-	0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01,
-	0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e,
-	0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457,
-	0x65b0d9c6, 0x12b7e950, 0x8bbeb8ea, 0xfcb9887c,
-	0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
-	0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2,
-	0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb,
-	0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0,
-	0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9,
-	0x5005713c, 0x270241aa, 0xbe0b1010, 0xc90c2086,
-	0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
-	0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4,
-	0x59b33d17, 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad,
-	0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a,
-	0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683,
-	0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8,
-	0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
-	0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe,
-	0xf762575d, 0x806567cb, 0x196c3671, 0x6e6b06e7,
-	0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc,
-	0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5,
-	0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252,
-	0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
-	0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60,
-	0xdf60efc3, 0xa867df55, 0x316e8eef, 0x4669be79,
-	0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
-	0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f,
-	0xc5ba3bbe, 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04,
-	0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
-	0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a,
-	0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713,
-	0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38,
-	0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21,
-	0x86d3d2d4, 0xf1d4e242, 0x68ddb3f8, 0x1fda836e,
-	0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
-	0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c,
-	0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45,
-	0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2,
-	0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db,
-	0xaed16a4a, 0xd9d65adc, 0x40df0b66, 0x37d83bf0,
-	0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
-	0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6,
-	0xbad03605, 0xcdd70693, 0x54de5729, 0x23d967bf,
-	0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94,
-	0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d
-};
-
-/*
-UCHAR   WEPKEY[] = {
-		//IV
-		0x00, 0x11, 0x22,
-		//WEP KEY
-		0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xAA, 0xBB, 0xCC
-	};
- */
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Init WEP function.
-
-	Arguments:
-      pAd		Pointer to our adapter
-		pKey        Pointer to the WEP KEY
-		KeyId		   WEP Key ID
-		KeyLen      the length of WEP KEY
-		pDest       Pointer to the destination which Encryption data will store in.
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPInitWepEngine(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pKey,
-	IN	UCHAR			KeyId,
-	IN	UCHAR			KeyLen,
-	IN OUT	PUCHAR		pDest)
-{
-	UINT i;
-	UCHAR   WEPKEY[] = {
-		//IV
-		0x00, 0x11, 0x22,
-		//WEP KEY
-		0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xAA, 0xBB, 0xCC
-	};
-
-	pAd->PrivateInfo.FCSCRC32 = PPPINITFCS32;   //Init crc32.
-
-#ifdef CONFIG_STA_SUPPORT
-    if (pAd->StaCfg.bCkipOn && (pAd->StaCfg.CkipFlag & 0x10) && (pAd->OpMode == OPMODE_STA))
-    {
-        ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, pKey, KeyLen);  //INIT SBOX, KEYLEN+3(IV)
-        NdisMoveMemory(pDest, pKey, 3);  //Append Init Vector
-    }
-    else
-#endif // CONFIG_STA_SUPPORT //
-    {
-		NdisMoveMemory(WEPKEY + 3, pKey, KeyLen);
-
-        for(i = 0; i < 3; i++)
-			WEPKEY[i] = RandomByte(pAd);   //Call mlme RandomByte() function.
-		ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, WEPKEY, KeyLen + 3);  //INIT SBOX, KEYLEN+3(IV)
-
-		NdisMoveMemory(pDest, WEPKEY, 3);  //Append Init Vector
-    }
-	*(pDest+3) = (KeyId << 6);       //Append KEYID
-
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Encrypt transimitted data
-
-	Arguments:
-      pAd		Pointer to our adapter
-      pSrc        Pointer to the transimitted source data that will be encrypt
-      pDest       Pointer to the destination where entryption data will be store in.
-      Len			Indicate the length of the source data
-
-	Return Value:
-      None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPEncryptData(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pSrc,
-	IN	PUCHAR			pDest,
-	IN	UINT			Len)
-{
-	pAd->PrivateInfo.FCSCRC32 = RTMP_CALC_FCS32(pAd->PrivateInfo.FCSCRC32, pSrc, Len);
-	ARCFOUR_ENCRYPT(&pAd->PrivateInfo.WEPCONTEXT, pDest, pSrc, Len);
-}
-
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Decrypt received WEP data
-
-	Arguments:
-		pAdapter		Pointer to our adapter
-		pSrc        Pointer to the received data
-		Len         the length of the received data
-
-	Return Value:
-		TRUE        Decrypt WEP data success
-		FALSE       Decrypt WEP data failed
-
-	Note:
-
-	========================================================================
-*/
-BOOLEAN	RTMPSoftDecryptWEP(
-	IN PRTMP_ADAPTER 	pAd,
-	IN PUCHAR			pData,
-	IN ULONG			DataByteCnt,
-	IN PCIPHER_KEY		pGroupKey)
-{
-	UINT	trailfcs;
-	UINT    crc32;
-	UCHAR	KeyIdx;
-	UCHAR   WEPKEY[] = {
-		//IV
-		0x00, 0x11, 0x22,
-		//WEP KEY
-		0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xAA, 0xBB, 0xCC
-	};
-	UCHAR 	*pPayload = (UCHAR *)pData + LENGTH_802_11;
-	ULONG	payload_len = DataByteCnt - LENGTH_802_11;
-
-	NdisMoveMemory(WEPKEY, pPayload, 3);    //Get WEP IV
-
-	KeyIdx = (*(pPayload + 3) & 0xc0) >> 6;
-	if (pGroupKey[KeyIdx].KeyLen == 0)
-		return (FALSE);
-
-	NdisMoveMemory(WEPKEY + 3, pGroupKey[KeyIdx].Key, pGroupKey[KeyIdx].KeyLen);
-	ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, WEPKEY, pGroupKey[KeyIdx].KeyLen + 3);
-	ARCFOUR_DECRYPT(&pAd->PrivateInfo.WEPCONTEXT, pPayload, pPayload + 4, payload_len - 4);
-	NdisMoveMemory(&trailfcs, pPayload + payload_len - 8, 4);
-	crc32 = RTMP_CALC_FCS32(PPPINITFCS32, pPayload, payload_len - 8);  //Skip last 4 bytes(FCS).
-	crc32 ^= 0xffffffff;             /* complement */
-
-    if(crc32 != cpu2le32(trailfcs))
-    {
-		DBGPRINT(RT_DEBUG_TRACE, ("! WEP Data CRC Error !\n"));	 //CRC error.
-		return (FALSE);
-	}
-	return (TRUE);
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		The Stream Cipher Encryption Algorithm "ARCFOUR" initialize
-
-	Arguments:
-	   Ctx         Pointer to ARCFOUR CONTEXT (SBOX)
-		pKey        Pointer to the WEP KEY
-		KeyLen      Indicate the length fo the WEP KEY
-
-	Return Value:
-	   None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	ARCFOUR_INIT(
-	IN	PARCFOURCONTEXT	Ctx,
-	IN	PUCHAR			pKey,
-	IN	UINT			KeyLen)
-{
-	UCHAR	t, u;
-	UINT	keyindex;
-	UINT	stateindex;
-	PUCHAR	state;
-	UINT	counter;
-
-	state = Ctx->STATE;
-	Ctx->X = 0;
-	Ctx->Y = 0;
-	for (counter = 0; counter < 256; counter++)
-		state[counter] = (UCHAR)counter;
-	keyindex = 0;
-	stateindex = 0;
-	for (counter = 0; counter < 256; counter++)
-	{
-		t = state[counter];
-		stateindex = (stateindex + pKey[keyindex] + t) & 0xff;
-		u = state[stateindex];
-		state[stateindex] = t;
-		state[counter] = u;
-		if (++keyindex >= KeyLen)
-			keyindex = 0;
-	}
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Get bytes from ARCFOUR CONTEXT (S-BOX)
-
-	Arguments:
-	   Ctx         Pointer to ARCFOUR CONTEXT (SBOX)
-
-	Return Value:
-	   UCHAR  - the value of the ARCFOUR CONTEXT (S-BOX)
-
-	Note:
-
-	========================================================================
-*/
-UCHAR	ARCFOUR_BYTE(
-	IN	PARCFOURCONTEXT		Ctx)
-{
-  UINT x;
-  UINT y;
-  UCHAR sx, sy;
-  PUCHAR state;
-
-  state = Ctx->STATE;
-  x = (Ctx->X + 1) & 0xff;
-  sx = state[x];
-  y = (sx + Ctx->Y) & 0xff;
-  sy = state[y];
-  Ctx->X = x;
-  Ctx->Y = y;
-  state[y] = sx;
-  state[x] = sy;
-
-  return(state[(sx + sy) & 0xff]);
-
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		The Stream Cipher Decryption Algorithm
-
-	Arguments:
-		Ctx         Pointer to ARCFOUR CONTEXT (SBOX)
-		pDest			Pointer to the Destination
-		pSrc        Pointer to the Source data
-		Len         Indicate the length of the Source data
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	ARCFOUR_DECRYPT(
-	IN	PARCFOURCONTEXT	Ctx,
-	IN	PUCHAR			pDest,
-	IN	PUCHAR			pSrc,
-	IN	UINT			Len)
-{
-	UINT i;
-
-	for (i = 0; i < Len; i++)
-		pDest[i] = pSrc[i] ^ ARCFOUR_BYTE(Ctx);
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		The Stream Cipher Encryption Algorithm
-
-	Arguments:
-		Ctx         Pointer to ARCFOUR CONTEXT (SBOX)
-		pDest			Pointer to the Destination
-		pSrc        Pointer to the Source data
-		Len         Indicate the length of the Source dta
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	ARCFOUR_ENCRYPT(
-	IN	PARCFOURCONTEXT	Ctx,
-	IN	PUCHAR			pDest,
-	IN	PUCHAR			pSrc,
-	IN	UINT			Len)
-{
-	UINT i;
-
-	for (i = 0; i < Len; i++)
-		pDest[i] = pSrc[i] ^ ARCFOUR_BYTE(Ctx);
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		The Stream Cipher Encryption Algorithm which conform to the special requirement to encrypt  GTK.
-
-	Arguments:
-		Ctx         Pointer to ARCFOUR CONTEXT (SBOX)
-		pDest			Pointer to the Destination
-		pSrc        Pointer to the Source data
-		Len         Indicate the length of the Source dta
-
-
-	========================================================================
-*/
-
-VOID	WPAARCFOUR_ENCRYPT(
-	IN	PARCFOURCONTEXT	Ctx,
-	IN	PUCHAR			pDest,
-	IN	PUCHAR			pSrc,
-	IN	UINT			Len)
-{
-	UINT i;
-        //discard first 256 bytes
-	for (i = 0; i < 256; i++)
-            ARCFOUR_BYTE(Ctx);
-
-	for (i = 0; i < Len; i++)
-		pDest[i] = pSrc[i] ^ ARCFOUR_BYTE(Ctx);
-}
-
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Calculate a new FCS given the current FCS and the new data.
-
-	Arguments:
-		Fcs	      the original FCS value
-		Cp          pointer to the data which will be calculate the FCS
-		Len         the length of the data
-
-	Return Value:
-		UINT - FCS 32 bits
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-UINT	RTMP_CALC_FCS32(
-	IN	UINT	Fcs,
-	IN	PUCHAR	Cp,
-	IN	INT		Len)
-{
-	while (Len--)
-	   Fcs = (((Fcs) >> 8) ^ FCSTAB_32[((Fcs) ^ (*Cp++)) & 0xff]);
-
-	return (Fcs);
-}
-
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Get last FCS and encrypt it to the destination
-
-	Arguments:
-		pDest			Pointer to the Destination
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPSetICV(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR	pDest)
-{
-	pAd->PrivateInfo.FCSCRC32 ^= 0xffffffff;             /* complement */
-	pAd->PrivateInfo.FCSCRC32 = cpu2le32(pAd->PrivateInfo.FCSCRC32);
-
-	ARCFOUR_ENCRYPT(&pAd->PrivateInfo.WEPCONTEXT, pDest, (PUCHAR) &pAd->PrivateInfo.FCSCRC32, 4);
-}
-
+#include "../../rt2860/common/rtmp_wep.c"
diff --git a/drivers/staging/rt2870/common/rtusb_bulk.c b/drivers/staging/rt2870/common/rtusb_bulk.c
index c46d9166ccf..7ae3e959613 100644
--- a/drivers/staging/rt2870/common/rtusb_bulk.c
+++ b/drivers/staging/rt2870/common/rtusb_bulk.c
@@ -52,11 +52,7 @@ void RTUSB_FILL_BULK_URB (struct urb *pUrb,
 	void *pContext)
 {
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
 	usb_fill_bulk_urb(pUrb, pUsb_Dev, bulkpipe, pTransferBuf, BufSize, (usb_complete_t)Complete, pContext);
-#else
-	FILL_BULK_URB(pUrb, pUsb_Dev, bulkpipe, pTransferBuf, BufSize, Complete, pContext);
-#endif
 
 }
 
@@ -95,14 +91,12 @@ VOID	RTUSBInitTxDesc(
 						Func,
 						pTxContext);
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
 	if (pTxContext->bAggregatible)
 		pUrb->transfer_dma	= (pTxContext->data_dma + TX_BUFFER_NORMSIZE + 2);
 	else
 		pUrb->transfer_dma	= pTxContext->data_dma;
 
 	pUrb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-#endif
 
 }
 
@@ -135,10 +129,8 @@ VOID	RTUSBInitHTTxDesc(
 						Func,
 						pTxContext);
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
 	pUrb->transfer_dma	= (pTxContext->data_dma + pTxContext->NextBulkOutPosition);
 	pUrb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-#endif
 
 }
 
@@ -168,10 +160,8 @@ VOID	RTUSBInitRxDesc(
 						(usb_complete_t)RTUSBBulkRxComplete,
 						(void *)pRxContext);
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
 	pUrb->transfer_dma	= pRxContext->data_dma + pAd->NextRxBulkInPosition;
 	pUrb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-#endif
 
 
 }
@@ -327,6 +317,7 @@ VOID	RTUSBBulkOutDataPacket(
 			break;
 		}
 
+		//PS packets use HCCA queue when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA)
 		if (pTxInfo->QSEL != FIFO_EDCA)
 		{
 			printk("%s(): ====> pTxInfo->QueueSel(%d)!= FIFO_EDCA!!!!\n", __func__, pTxInfo->QSEL);
@@ -359,7 +350,7 @@ VOID	RTUSBBulkOutDataPacket(
 		pLastTxInfo = pTxInfo;
 
 		// Make sure we use EDCA QUEUE.
-		pTxInfo->QSEL = FIFO_EDCA;
+		pTxInfo->QSEL = FIFO_EDCA;  //PS packets use HCCA queue when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA)
 		ThisBulkSize += (pTxInfo->USBDMATxPktLen+4);
 		TmpBulkEndPos += (pTxInfo->USBDMATxPktLen+4);
 
@@ -375,31 +366,14 @@ VOID	RTUSBBulkOutDataPacket(
 			bTxQLastRound = TRUE;
 			pHTTXContext->ENextBulkOutPosition = 8;
 
-	#ifdef RT_BIG_ENDIAN
-			RTMPDescriptorEndianChange((PUCHAR)pTxInfo, TYPE_TXINFO);
-			RTMPWIEndianChange((PUCHAR)pTxWI, TYPE_TXWI);
-	#endif // RT_BIG_ENDIAN //
-
 			break;
 		}
-
-#ifdef RT_BIG_ENDIAN
-		RTMPDescriptorEndianChange((PUCHAR)pTxInfo, TYPE_TXINFO);
-		RTMPWIEndianChange((PUCHAR)pTxWI, TYPE_TXWI);
-#endif // RT_BIG_ENDIAN //
-
 	}while (TRUE);
 
 	// adjust the pTxInfo->USBDMANextVLD value of last pTxInfo.
 	if (pLastTxInfo)
 	{
-#ifdef RT_BIG_ENDIAN
-		RTMPDescriptorEndianChange((PUCHAR)pLastTxInfo, TYPE_TXINFO);
-#endif // RT_BIG_ENDIAN //
 		pLastTxInfo->USBDMANextVLD = 0;
-#ifdef RT_BIG_ENDIAN
-		RTMPDescriptorEndianChange((PUCHAR)pLastTxInfo, TYPE_TXINFO);
-#endif // RT_BIG_ENDIAN //
 	}
 
 	/*
@@ -475,115 +449,6 @@ VOID	RTUSBBulkOutDataPacket(
 
 VOID RTUSBBulkOutDataPacketComplete(purbb_t pUrb, struct pt_regs *pt_regs)
 {
-#if 0 // sample, IRQ LOCK
-	PRTMP_ADAPTER		pAd;
-	POS_COOKIE			pObj;
-	PHT_TX_CONTEXT		pHTTXContext;
-	UCHAR				BulkOutPipeId;
-	NTSTATUS			Status;
-	unsigned long		IrqFlags;
-
-	DBGPRINT_RAW(RT_DEBUG_INFO, ("--->RTUSBBulkOutDataPacketComplete\n"));
-
-	pHTTXContext	= (PHT_TX_CONTEXT)pUrb->context;
-	pAd			= pHTTXContext->pAd;
-	pObj 		= (POS_COOKIE) pAd->OS_Cookie;
-	Status		= pUrb->status;
-
-	// Store BulkOut PipeId
-	BulkOutPipeId = pHTTXContext->BulkOutPipeId;
-	pAd->BulkOutDataOneSecCount++;
-
-	//DBGPRINT(RT_DEBUG_LOUD, ("Done-B(%d):I=0x%lx, CWPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d!\n", BulkOutPipeId, in_interrupt(), pHTTXContext->CurWritePosition,
-	//		pHTTXContext->NextBulkOutPosition, pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad));
-
-	RTMP_IRQ_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-	pAd->BulkOutPending[BulkOutPipeId] = FALSE;
-	pHTTXContext->IRPPending = FALSE;
-	RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-
-	if (Status == USB_ST_NOERROR)
-	{
-		pAd->BulkOutComplete++;
-
-		pAd->Counters8023.GoodTransmits++;
-		//RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags);
-		FREE_HTTX_RING(pAd, BulkOutPipeId, pHTTXContext);
-		//RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags);
-
-
-	}
-	else	// STATUS_OTHER
-	{
-		PUCHAR	pBuf;
-
-		pAd->BulkOutCompleteOther++;
-
-		pBuf = &pHTTXContext->TransferBuffer->WirelessPacket[pHTTXContext->NextBulkOutPosition];
-
-		DBGPRINT_RAW(RT_DEBUG_ERROR, ("BulkOutDataPacket failed: ReasonCode=%d!\n", Status));
-		DBGPRINT_RAW(RT_DEBUG_ERROR, (">>BulkOut Req=0x%lx, Complete=0x%lx, Other=0x%lx\n", pAd->BulkOutReq, pAd->BulkOutComplete, pAd->BulkOutCompleteOther));
-		DBGPRINT_RAW(RT_DEBUG_ERROR, (">>BulkOut Header:%x %x %x %x %x %x %x %x\n", pBuf[0], pBuf[1], pBuf[2], pBuf[3], pBuf[4], pBuf[5], pBuf[6], pBuf[7]));
-		//DBGPRINT_RAW(RT_DEBUG_ERROR, (">>BulkOutCompleteCancel=0x%x, BulkOutCompleteOther=0x%x\n", pAd->BulkOutCompleteCancel, pAd->BulkOutCompleteOther));
-
-		if (!RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS |
-									fRTMP_ADAPTER_HALT_IN_PROGRESS |
-									fRTMP_ADAPTER_NIC_NOT_EXIST |
-									fRTMP_ADAPTER_BULKOUT_RESET)))
-		{
-			RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET);
-			pAd->bulkResetPipeid = BulkOutPipeId;
-		}
-	}
-
-	//
-	// bInUse = TRUE, means some process are filling TX data, after that must turn on bWaitingBulkOut
-	// bWaitingBulkOut = TRUE, means the TX data are waiting for bulk out.
-	//
-	//RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags);
-	if ((pHTTXContext->ENextBulkOutPosition != pHTTXContext->CurWritePosition) &&
-		(pHTTXContext->ENextBulkOutPosition != (pHTTXContext->CurWritePosition+8)) &&
-		!RTUSB_TEST_BULK_FLAG(pAd, (fRTUSB_BULK_OUT_DATA_FRAG << BulkOutPipeId)))
-	{
-		// Indicate There is data avaliable
-		RTUSB_SET_BULK_FLAG(pAd, (fRTUSB_BULK_OUT_DATA_NORMAL << BulkOutPipeId));
-	}
-	//RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags);
-
-	// Always call Bulk routine, even reset bulk.
-	// The protection of rest bulk should be in BulkOut routine
-	RTUSBKickBulkOut(pAd);
-
-
-	//DBGPRINT(RT_DEBUG_LOUD,("Done-A(%d):I=0x%lx, CWPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d\n", BulkOutPipeId, in_interrupt(),
-	//		pHTTXContext->CurWritePosition, pHTTXContext->NextBulkOutPosition, pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad));
-
-	switch (BulkOutPipeId)
-	{
-		case 0:
-				pObj->ac0_dma_done_task.data = (unsigned long)pAd;
-				tasklet_hi_schedule(&pObj->ac0_dma_done_task);
-				break;
-		case 1:
-				pObj->ac1_dma_done_task.data = (unsigned long)pAd;
-				tasklet_hi_schedule(&pObj->ac1_dma_done_task);
-				break;
-		case 2:
-				pObj->ac2_dma_done_task.data = (unsigned long)pAd;
-				tasklet_hi_schedule(&pObj->ac2_dma_done_task);
-				break;
-		case 3:
-				pObj->ac3_dma_done_task.data = (unsigned long)pAd;
-				tasklet_hi_schedule(&pObj->ac3_dma_done_task);
-				break;
-		case 4:
-				pObj->hcca_dma_done_task.data = (unsigned long)pAd;
-				tasklet_hi_schedule(&pObj->hcca_dma_done_task);
-				break;
-	}
-#else
-
-{
 	PHT_TX_CONTEXT	pHTTXContext;
 	PRTMP_ADAPTER	pAd;
 	POS_COOKIE 		pObj;
@@ -622,10 +487,6 @@ VOID RTUSBBulkOutDataPacketComplete(purbb_t pUrb, struct pt_regs *pt_regs)
 				break;
 	}
 }
-#endif
-
-
-}
 
 
 /*
@@ -667,10 +528,6 @@ VOID	RTUSBBulkOutNullFrame(
 	// Clear Null frame bulk flag
 	RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NULL);
 
-#ifdef RT_BIG_ENDIAN
-	RTMPDescriptorEndianChange((PUCHAR)pNullContext->TransferBuffer, TYPE_TXINFO);
-#endif // RT_BIG_ENDIAN //
-
 	// Init Tx context descriptor
 	RTUSBInitTxDesc(pAd, pNullContext, 0, (usb_complete_t)RTUSBBulkOutNullFrameComplete);
 
@@ -695,9 +552,6 @@ VOID RTUSBBulkOutNullFrameComplete(purbb_t pUrb, struct pt_regs *pt_regs)
 	PRTMP_ADAPTER		pAd;
 	PTX_CONTEXT			pNullContext;
 	NTSTATUS			Status;
-#if 0 // sample, IRQ LOCK
-	unsigned long		IrqFlags;
-#endif
 	POS_COOKIE			pObj;
 
 
@@ -705,173 +559,10 @@ VOID RTUSBBulkOutNullFrameComplete(purbb_t pUrb, struct pt_regs *pt_regs)
 	pAd 			= pNullContext->pAd;
 	Status 			= pUrb->status;
 
-#if 0 // sample, IRQ LOCK
-	// Reset Null frame context flags
-	pNullContext->IRPPending 	= FALSE;
-	pNullContext->InUse 		= FALSE;
-
-	if (Status == USB_ST_NOERROR)
-	{
-		// Don't worry about the queue is empty or not, this function will check itself
-		//RTMPUSBDeQueuePacket(pAd, 0);
-		RTMPDeQueuePacket(pAd, TRUE, NUM_OF_TX_RING, MAX_TX_PROCESS);
-	}
-	else	// STATUS_OTHER
-	{
-		if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)))
-		{
-			DBGPRINT_RAW(RT_DEBUG_ERROR, ("Bulk Out Null Frame Failed\n"));
-			RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET);
-			RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT, NULL, 0);
-		}
-	}
-
-	RTMP_IRQ_LOCK(&pAd->BulkOutLock[0], IrqFlags);
-	pAd->BulkOutPending[0] = FALSE;
-	RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[0], IrqFlags);
-
-	// Always call Bulk routine, even reset bulk.
-	// The protectioon of rest bulk should be in BulkOut routine
-	RTUSBKickBulkOut(pAd);
-#else
-
 	pObj = (POS_COOKIE) pAd->OS_Cookie;
 	pObj->null_frame_complete_task.data = (unsigned long)pUrb;
 	tasklet_hi_schedule(&pObj->null_frame_complete_task);
-#endif
-
-}
-
-#if 0	// For RT2870, RTS frame not used now, but maybe will use it latter.
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	Note: RTS frame use BulkOutPipeId = 0
-
-	========================================================================
-*/
-VOID	RTUSBBulkOutRTSFrame(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	PTX_CONTEXT		pRTSContext = &(pAd->RTSContext);
-	PURB			pUrb;
-	int				ret = 0;
-	unsigned long	IrqFlags;
-	UCHAR			PipeID=0;
-
-	if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL_4))
-		PipeID= 3;
-	else if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL_3))
-		PipeID= 2;
-	else if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL_2))
-		PipeID= 1;
-	else if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL))
-		PipeID= 0;
-
-	RTMP_IRQ_LOCK(&pAd->BulkOutLock[PipeID], IrqFlags);
-	if ((pAd->BulkOutPending[PipeID] == TRUE) || RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NEED_STOP_TX))
-	{
-		RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[PipeID], IrqFlags);
-		return;
-	}
-	pAd->BulkOutPending[PipeID] = TRUE;
-	RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[PipeID], IrqFlags);
-
-	// Increase Total transmit byte counter
-	pAd->RalinkCounters.TransmittedByteCount +=  pRTSContext->BulkOutSize;
-
-	DBGPRINT_RAW(RT_DEBUG_INFO, ("--->RTUSBBulkOutRTSFrame \n"));
-
-	// Clear RTS frame bulk flag
-	RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_RTS);
-
-#ifdef RT_BIG_ENDIAN
-	RTMPDescriptorEndianChange((PUCHAR)pRTSContext->TransferBuffer, TYPE_TXINFO);
-#endif // RT_BIG_ENDIAN //
-
-	// Init Tx context descriptor
-	RTUSBInitTxDesc(pAd, pRTSContext, PipeID, (usb_complete_t)RTUSBBulkOutRTSFrameComplete);
-	pRTSContext->IRPPending = TRUE;
-
-	pUrb = pRTSContext->pUrb;
-	if((ret = RTUSB_SUBMIT_URB(pUrb))!=0)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("RTUSBBulkOutRTSFrame: Submit Tx URB failed %d\n", ret));
-		return;
-	}
-
-	DBGPRINT_RAW(RT_DEBUG_INFO, ("<---RTUSBBulkOutRTSFrame \n"));
-
-}
-
-// RTS frame use BulkOutPipeId = 0
-VOID RTUSBBulkOutRTSFrameComplete(purbb_t pUrb, struct pt_regs *pt_regs)
-{
-	PRTMP_ADAPTER	pAd;
-	PTX_CONTEXT		pRTSContext;
-	NTSTATUS		Status;
-#if 0 // sample, IRQ LOCK
-	unsigned long	IrqFlags;
-#endif
-	POS_COOKIE		pObj;
-
-	DBGPRINT_RAW(RT_DEBUG_INFO, ("--->RTUSBBulkOutRTSFrameComplete\n"));
-
-	pRTSContext	= (PTX_CONTEXT)pUrb->context;
-	pAd			= pRTSContext->pAd;
-	Status		= pUrb->status;
-
-#if 0 // sample, IRQ LOCK
-	// Reset RTS frame context flags
-	pRTSContext->IRPPending = FALSE;
-	pRTSContext->InUse		= FALSE;
-
-	if (Status == USB_ST_NOERROR)
-	{
-		// Don't worry about the queue is empty or not, this function will check itself
-		//RTMPUSBDeQueuePacket(pAd, pRTSContext->BulkOutPipeId);
-		RTMPDeQueuePacket(pAd, TRUE, NUM_OF_TX_RING, MAX_TX_PROCESS);
-	}
-	else	// STATUS_OTHER
-	{
-		if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)))
-		{
-			DBGPRINT_RAW(RT_DEBUG_ERROR, ("Bulk Out RTS Frame Failed\n"));
-			RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET);
-			RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT, NULL, 0);
-		}
-	}
-
-	RTMP_IRQ_LOCK(&pAd->BulkOutLock[pRTSContext->BulkOutPipeId], IrqFlags);
-	pAd->BulkOutPending[pRTSContext->BulkOutPipeId] = FALSE;
-	RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[pRTSContext->BulkOutPipeId], IrqFlags);
-
-	// Always call Bulk routine, even reset bulk.
-	// The protectioon of rest bulk should be in BulkOut routine
-	RTUSBKickBulkOut(pAd);
-#else
-
-	pObj = (POS_COOKIE) pAd->OS_Cookie;
-	pObj->rts_frame_complete_task.data = (unsigned long)pUrb;
-	tasklet_hi_schedule(&pObj->rts_frame_complete_task);
-#endif
-
-	DBGPRINT_RAW(RT_DEBUG_INFO, ("<---RTUSBBulkOutRTSFrameComplete\n"));
-
 }
-#endif
 
 /*
 	========================================================================
@@ -930,37 +621,12 @@ VOID	RTUSBBulkOutMLMEPacket(
 	// Clear MLME bulk flag
 	RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_MLME);
 
-
-	//DBGPRINT_RAW(RT_DEBUG_INFO, ("--->RTUSBBulkOutMLMEPacket\n"));
-#if 0 // for debug
-{
-	printk("MLME-Out, C=%d!, D=%d, F=%d!\n", pAd->MgmtRing.TxCpuIdx, pAd->MgmtRing.TxDmaIdx, pAd->MgmtRing.TxSwFreeIdx);
-
-	//TODO: Need to remove it when formal release
-	PTXINFO_STRUC pTxInfo;
-
-	pTxInfo = (PTXINFO_STRUC)pMLMEContext->TransferBuffer;
-	if (pTxInfo->QSEL != FIFO_EDCA)
-	{
-			printk("%s(): ====> pTxInfo->QueueSel(%d)!= FIFO_EDCA!!!!\n", __func__, pTxInfo->QSEL);
-			printk("\tMLME_Index=%d!\n", Index);
-			hex_dump("Wrong QSel Pkt:", (PUCHAR)pMLMEContext->TransferBuffer, pTxInfo->USBDMATxPktLen);
-	}
-}
-#endif
-
-#ifdef RT_BIG_ENDIAN
-	RTMPDescriptorEndianChange((PUCHAR)pMLMEContext->TransferBuffer, TYPE_TXINFO);
-#endif // RT_BIG_ENDIAN //
-
 	// Init Tx context descriptor
 	RTUSBInitTxDesc(pAd, pMLMEContext, MGMTPIPEIDX, (usb_complete_t)RTUSBBulkOutMLMEPacketComplete);
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
 	//For mgmt urb buffer, because we use sk_buff, so we need to notify the USB controller do dma mapping.
 	pUrb->transfer_dma	= 0;
 	pUrb->transfer_flags &= (~URB_NO_TRANSFER_DMA_MAP);
-#endif
 
 	pUrb = pMLMEContext->pUrb;
 	if((ret = RTUSB_SUBMIT_URB(pUrb))!=0)
@@ -988,11 +654,6 @@ VOID RTUSBBulkOutMLMEPacketComplete(purbb_t pUrb, struct pt_regs *pt_regs)
 	NTSTATUS			Status;
 	POS_COOKIE 			pObj;
 	int					index;
-#if 0 // sample, IRQ LOCK
-	unsigned long		IrqFlags;
-	PNDIS_PACKET		pPacket;
-#endif
-
 
 	//DBGPRINT_RAW(RT_DEBUG_INFO, ("--->RTUSBBulkOutMLMEPacketComplete\n"));
 	pMLMEContext	= (PTX_CONTEXT)pUrb->context;
@@ -1001,82 +662,8 @@ VOID RTUSBBulkOutMLMEPacketComplete(purbb_t pUrb, struct pt_regs *pt_regs)
 	Status			= pUrb->status;
 	index 			= pMLMEContext->SelfIdx;
 
-
-#if 0 // sample, IRQ LOCK
-	ASSERT((pAd->MgmtRing.TxDmaIdx == index));
-	//printk("MLME-Done-B: C=%d, D=%d, F=%d, Self=%d!\n", pAd->MgmtRing.TxCpuIdx, pAd->MgmtRing.TxDmaIdx, pAd->MgmtRing.TxSwFreeIdx, pMLMEContext->SelfIdx);
-
-	RTMP_IRQ_LOCK(&pAd->BulkOutLock[MGMTPIPEIDX], IrqFlags);
-
-
-	if (Status != USB_ST_NOERROR)
-	{
-		//Bulk-Out fail status handle
-		if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)))
-		{
-			DBGPRINT_RAW(RT_DEBUG_ERROR, ("Bulk Out MLME Failed, Status=%d!\n", Status));
-			// TODO: How to handle about the MLMEBulkOut failed issue. Need to resend the mgmt pkt?
-			RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET);
-			pAd->bulkResetPipeid = (MGMTPIPEIDX | BULKOUT_MGMT_RESET_FLAG);
-		}
-	}
-	pAd->BulkOutPending[MGMTPIPEIDX] = FALSE;
-	RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[MGMTPIPEIDX], IrqFlags);
-
-	RTMP_IRQ_LOCK(&pAd->MLMEBulkOutLock, IrqFlags);
-	// Reset MLME context flags
-	pMLMEContext->IRPPending = FALSE;
-	pMLMEContext->InUse = FALSE;
-	pMLMEContext->bWaitingBulkOut = FALSE;
-	pMLMEContext->BulkOutSize = 0;
-
-	pPacket = pAd->MgmtRing.Cell[index].pNdisPacket;
-	pAd->MgmtRing.Cell[index].pNdisPacket = NULL;
-
-	// Increase MgmtRing Index
-	INC_RING_INDEX(pAd->MgmtRing.TxDmaIdx, MGMT_RING_SIZE);
-	pAd->MgmtRing.TxSwFreeIdx++;
-
-	RTMP_IRQ_UNLOCK(&pAd->MLMEBulkOutLock, IrqFlags);
-
-	// No-matter success or fail, we free the mgmt packet.
-	if (pPacket)
-		RTMPFreeNdisPacket(pAd, pPacket);
-
-#if 0
-	//Bulk-Out fail status handle
-	if (Status != USB_ST_NOERROR)
-	{
-		if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)))
-		{
-			DBGPRINT_RAW(RT_DEBUG_ERROR, ("Bulk Out MLME Failed, Status=%d!\n", Status));
-			// TODO: How to handle about the MLMEBulkOut failed issue. Need to reset the endpoint?
-			RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET);
-			pAd->bulkResetPipeid = (MGMTPIPEIDX | BULKOUT_MGMT_RESET_FLAG);
-		}
-	}
-#endif
-
-	//printk("MLME-Done-A: C=%d, D=%d, F=%d!\n", pAd->MgmtRing.TxCpuIdx, pAd->MgmtRing.TxDmaIdx, pAd->MgmtRing.TxSwFreeIdx);
-
-	pObj->mgmt_dma_done_task.data = (unsigned long)pAd;
-	tasklet_hi_schedule(&pObj->mgmt_dma_done_task);
-
-	//DBGPRINT_RAW(RT_DEBUG_INFO, ("<---RTUSBBulkOutMLMEPacketComplete\n"));
-//	printk("<---RTUSBBulkOutMLMEPacketComplete, Cpu=%d, Dma=%d, SwIdx=%d!\n",
-//				pAd->MgmtRing.TxCpuIdx, pAd->MgmtRing.TxDmaIdx, pAd->MgmtRing.TxSwFreeIdx);
-
-#else
-
 	pObj->mgmt_dma_done_task.data = (unsigned long)pUrb;
 	tasklet_hi_schedule(&pObj->mgmt_dma_done_task);
-#endif
 }
 
 
@@ -1116,10 +703,6 @@ VOID	RTUSBBulkOutPsPoll(
 	// Clear PS-Poll bulk flag
 	RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_PSPOLL);
 
-#ifdef RT_BIG_ENDIAN
-	RTMPDescriptorEndianChange((PUCHAR)pPsPollContext->TransferBuffer, TYPE_TXINFO);
-#endif // RT_BIG_ENDIAN //
-
 	// Init Tx context descriptor
 	RTUSBInitTxDesc(pAd, pPsPollContext, MGMTPIPEIDX, (usb_complete_t)RTUSBBulkOutPsPollComplete);
 
@@ -1144,9 +727,6 @@ VOID RTUSBBulkOutPsPollComplete(purbb_t pUrb,struct pt_regs *pt_regs)
 	PRTMP_ADAPTER		pAd;
 	PTX_CONTEXT			pPsPollContext;
 	NTSTATUS			Status;
-#if 0 // sample, IRQ LOCK
-	unsigned long		IrqFlags;
-#endif
 	POS_COOKIE			pObj;
 
 
@@ -1154,255 +734,11 @@ VOID RTUSBBulkOutPsPollComplete(purbb_t pUrb,struct pt_regs *pt_regs)
 	pAd = pPsPollContext->pAd;
 	Status = pUrb->status;
 
-#if 0 // sample, IRQ LOCK
-	// Reset PsPoll context flags
-	pPsPollContext->IRPPending	= FALSE;
-	pPsPollContext->InUse		= FALSE;
-
-	if (Status == USB_ST_NOERROR)
-	{
-		// Don't worry about the queue is empty or not, this function will check itself
-		RTMPDeQueuePacket(pAd, TRUE, NUM_OF_TX_RING, MAX_TX_PROCESS);
-	}
-	else // STATUS_OTHER
-	{
-		if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)))
-		{
-			DBGPRINT_RAW(RT_DEBUG_ERROR, ("Bulk Out PSPoll Failed\n"));
-			RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET);
-			RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT, NULL, 0);
-		}
-	}
-
-	RTMP_IRQ_LOCK(&pAd->BulkOutLock[0], IrqFlags);
-	pAd->BulkOutPending[0] = FALSE;
-	RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[0], IrqFlags);
-
-	// Always call Bulk routine, even reset bulk.
-	// The protectioon of rest bulk should be in BulkOut routine
-	RTUSBKickBulkOut(pAd);
-#else
-
 	pObj = (POS_COOKIE) pAd->OS_Cookie;
 	pObj->pspoll_frame_complete_task.data = (unsigned long)pUrb;
 	tasklet_hi_schedule(&pObj->pspoll_frame_complete_task);
-#endif
-}
-
-
-#if 0
-/*
-	========================================================================
-
-	Routine Description:
-	USB_RxPacket initializes a URB and uses the Rx IRP to submit it
-	to USB. It checks if an Rx Descriptor is available and passes the
-	the coresponding buffer to be filled. If no descriptor is available
-	fails the request. When setting the completion routine we pass our
-	Adapter Object as Context.
-
-	Arguments:
-
-	Return Value:
-		TRUE			found matched tuple cache
-		FALSE			no matched found
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTUSBBulkReceive(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	PRX_CONTEXT		pRxContext;
-	PURB			pUrb;
-	int				ret = 0;
-	unsigned long	IrqFlags;
-
-
-	/* device had been closed */
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS))
-		return;
-
-	RTMP_IRQ_LOCK(&pAd->BulkInLock, IrqFlags);
-
-	// Last is time point between 2 separate URB.
-	if (pAd->NextRxBulkInPosition == 0)
-	{
-		//pAd->NextRxBulkInIndex = (pAd->NextRxBulkInIndex + 1) % (RX_RING_SIZE);
-		INC_RING_INDEX(pAd->NextRxBulkInIndex, RX_RING_SIZE);
-	}
-	else if ((pAd->NextRxBulkInPosition&0x1ff) != 0)
-	{
-		//pAd->NextRxBulkInIndex = (pAd->NextRxBulkInIndex + 1) % (RX_RING_SIZE);
-		INC_RING_INDEX(pAd->NextRxBulkInIndex, RX_RING_SIZE);
-		DBGPRINT_RAW(RT_DEBUG_TRACE, ("pAd->NextRxBulkInPosition = 0x%lx.  End of URB.\n", pAd->NextRxBulkInPosition ));
-		pAd->NextRxBulkInPosition = 0;
-	}
-
-	if (pAd->NextRxBulkInPosition == MAX_RXBULK_SIZE)
-		pAd->NextRxBulkInPosition = 0;
-
-	pRxContext = &(pAd->RxContext[pAd->NextRxBulkInIndex]);
-
-	// TODO: Why need to check if pRxContext->InUsed == TRUE?
-	//if ((pRxContext->InUse == TRUE) || (pRxContext->Readable == TRUE))
-	if ((pRxContext->InUse == FALSE) && (pRxContext->Readable == TRUE))
-	{
-		DBGPRINT_RAW(RT_DEBUG_TRACE, ("pRxContext[%d] InUse = %d.pRxContext->Readable = %d.  Return.\n", pAd->NextRxBulkInIndex,pRxContext->InUse, pRxContext->Readable ));
-		RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
-
-		// read RxContext, Since not
-#ifdef CONFIG_STA_SUPPORT
-		STARxDoneInterruptHandle(pAd, TRUE);
-#endif // CONFIG_STA_SUPPORT //
-
-		//return;
-	}
-	pRxContext->InUse = TRUE;
-	pRxContext->IRPPending= TRUE;
-
-	RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
-
-	// Init Rx context descriptor
-	NdisZeroMemory(pRxContext->TransferBuffer, BUFFER_SIZE);
-	RTUSBInitRxDesc(pAd, pRxContext);
-
-	pUrb = pRxContext->pUrb;
-	if ((ret = RTUSB_SUBMIT_URB(pUrb))!=0)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("RTUSBBulkReceive: Submit Rx URB failed %d\n", ret));
-		return;
-	}
-	else // success
-	{
-		NdisInterlockedIncrement(&pAd->PendingRx);
-		pAd->BulkInReq++;
-	}
-
-	// read RxContext, Since not
-#ifdef CONFIG_STA_SUPPORT
-	STARxDoneInterruptHandle(pAd, FALSE);
-#endif // CONFIG_STA_SUPPORT //
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		This routine process Rx Irp and call rx complete function.
-
-	Arguments:
-		DeviceObject	Pointer to the device object for next lower
-						device. DeviceObject passed in here belongs to
-						the next lower driver in the stack because we
-						were invoked via IoCallDriver in USB_RxPacket
-						AND it is not OUR device object
-	  Irp				Ptr to completed IRP
-	  Context			Ptr to our Adapter object (context specified
-						in IoSetCompletionRoutine
-
-	Return Value:
-		Always returns STATUS_MORE_PROCESSING_REQUIRED
-
-	Note:
-		Always returns STATUS_MORE_PROCESSING_REQUIRED
-	========================================================================
-*/
-VOID RTUSBBulkRxComplete(purbb_t pUrb, struct pt_regs *pt_regs)
-{
-#if 0
-	PRX_CONTEXT			pRxContext;
-	PRTMP_ADAPTER		pAd;
-	NTSTATUS			Status;
-//	POS_COOKIE			pObj;
-
-	pRxContext	= (PRX_CONTEXT)pUrb->context;
-	pAd 		= pRxContext->pAd;
-//	pObj		= (POS_COOKIE) pAd->OS_Cookie;
-
-
-	Status = pUrb->status;
-	//pRxContext->pIrp = NULL;
-
-	pRxContext->InUse = FALSE;
-	pRxContext->IRPPending = FALSE;
-
-	if (Status == USB_ST_NOERROR)
-	{
-		pAd->BulkInComplete++;
-		pRxContext->Readable = TRUE;
-		pAd->NextRxBulkInPosition = 0;
-
-	}
-	else	 // STATUS_OTHER
-	{
-		pAd->BulkInCompleteFail++;
-		// Still read this packet although it may comtain wrong bytes.
-		pRxContext->Readable = FALSE;
-		// Parsing all packets. because after reset, the index will reset to all zero.
-
-		if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKIN_RESET)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
-		{
-
-			DBGPRINT_RAW(RT_DEBUG_ERROR, ("Bulk In Failed. Status = %d\n", Status));
-			DBGPRINT_RAW(RT_DEBUG_ERROR, ("==>NextRxBulkInIndex=0x%x, NextRxBulkInReadIndex=0x%x, TransferBufferLength= 0x%x\n",
-				pAd->NextRxBulkInIndex, pAd->NextRxBulkInReadIndex, pRxContext->pUrb->actual_length));
-
-			RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BULKIN_RESET);
-			RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_IN, NULL, 0);
-		}
-		//pUrb = NULL;
-	}
-
-	if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) &&
-		(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKIN_RESET)) &&
-//		(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)) &&
-		(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF)) &&
-		(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) &&
-		(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
-	{
-		RTUSBBulkReceive(pAd);
-#if 0
-#if 1
-		STARxDoneInterruptHandle(pAd, FALSE);
-#else
-		pObj->rx_bh.data = (unsigned long)pUrb;
-		tasklet_schedule(&pObj->rx_bh);
-#endif
-#endif
-	}
-
-	// Call RxPacket to process packet and return the status
-	NdisInterlockedDecrement(&pAd->PendingRx);
-#else
-
-
-	// use a receive tasklet to handle received packets;
-	// or sometimes hardware IRQ will be disabled here, so we can not
-	// use spin_lock_bh()/spin_unlock_bh() after IRQ is disabled. :<
-	PRX_CONTEXT		pRxContext;
-	PRTMP_ADAPTER	pAd;
-	POS_COOKIE 		pObj;
-
-
-	pRxContext	= (PRX_CONTEXT)pUrb->context;
-	pAd 		= pRxContext->pAd;
-	pObj 		= (POS_COOKIE) pAd->OS_Cookie;
-
-	pObj->rx_done_task.data = (unsigned long)pUrb;
-	tasklet_hi_schedule(&pObj->rx_done_task);
-#endif
 }
 
-#else
-
 VOID DoBulkIn(IN RTMP_ADAPTER *pAd)
 {
 	PRX_CONTEXT		pRxContext;
@@ -1441,14 +777,6 @@ VOID DoBulkIn(IN RTMP_ADAPTER *pAd)
 	}
 	else
 	{	// success
-#if 0
-		RTMP_IRQ_LOCK(&pAd->BulkInLock, IrqFlags);
-		pRxContext->IRPPending = TRUE;
-		//NdisInterlockedIncrement(&pAd->PendingRx);
-		pAd->PendingRx++;
-		RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
-		pAd->BulkInReq++;
-#endif
 		ASSERT((pRxContext->InUse == pRxContext->IRPPending));
 		//printk("BIDone, Pend=%d,BIIdx=%d,BIRIdx=%d!\n", pAd->PendingRx, pAd->NextRxBulkInIndex, pAd->NextRxBulkInReadIndex);
 	}
@@ -1508,10 +836,7 @@ VOID	RTUSBBulkReceive(
 			RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
 
 			// read RxContext, Since not
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				STARxDoneInterruptHandle(pAd, TRUE);
-#endif // CONFIG_STA_SUPPORT //
+			STARxDoneInterruptHandle(pAd, TRUE);
 
 			// Finish to handle this bulkIn buffer.
 			RTMP_IRQ_LOCK(&pAd->BulkInLock, IrqFlags);
@@ -1579,8 +904,6 @@ VOID RTUSBBulkRxComplete(purbb_t pUrb, struct pt_regs *pt_regs)
 
 }
 
-#endif
-
 
 
 /*
@@ -1601,51 +924,8 @@ VOID	RTUSBKickBulkOut(
 {
 	// BulkIn Reset will reset whole USB PHY. So we need to make sure fRTMP_ADAPTER_BULKIN_RESET not flaged.
 	if (!RTMP_TEST_FLAG(pAd ,fRTMP_ADAPTER_NEED_STOP_TX)
-#ifdef RALINK_ATE
-		&& !(ATE_ON(pAd))
-#endif // RALINK_ATE //
 		)
 	{
-#if 0	// not used now in RT28xx, but may used latter.
-		// 1. Data Fragment has highest priority
-		if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_FRAG))
-		{
-			if (((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) ||
-				(!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
-				))
-			{
-				RTUSBBulkOutDataPacket(pAd, 0, pAd->NextBulkOutIndex[0]);
-			}
-		}
-		if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_FRAG_2))
-		{
-			if (((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) ||
-				(!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
-				))
-			{
-				RTUSBBulkOutDataPacket(pAd, 1, pAd->NextBulkOutIndex[1]);
-			}
-		}
-		if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_FRAG_3))
-		{
-			if (((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) ||
-				(!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
-				))
-			{
-				RTUSBBulkOutDataPacket(pAd, 2, pAd->NextBulkOutIndex[2]);
-			}
-		}
-		if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_FRAG_4))
-		{
-			if (((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) ||
-				(!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
-				))
-			{
-				RTUSBBulkOutDataPacket(pAd, 3, pAd->NextBulkOutIndex[3]);
-			}
-		}
-#endif
-
 		// 2. PS-Poll frame is next
 		if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_PSPOLL))
 		{
@@ -1696,6 +976,17 @@ VOID	RTUSBKickBulkOut(
 				RTUSBBulkOutDataPacket(pAd, 3, pAd->NextBulkOutIndex[3]);
 			}
 		}
+#ifdef RT30xx
+		//PS packets use HCCA queue when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA)
+		if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL_5))
+		{
+			if (((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) ||
+				(!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
+				))
+			{
+			}
+		}
+#endif
 
 		// 7. Null frame is the last
 		else if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NULL))
@@ -1712,18 +1003,6 @@ VOID	RTUSBKickBulkOut(
 
 		}
 	}
-#ifdef RALINK_ATE
-	/* If the mode is in ATE mode. */
-	else if((ATE_ON(pAd)) &&
-		!RTMP_TEST_FLAG(pAd ,fRTMP_ADAPTER_NEED_STOP_TX))// PETER : watch out !
-	{
-		if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE))
-		{
-			ATE_RTUSBBulkOutDataPacket(pAd, 0);
-		}
-	}
-#endif // RALINK_ATE //
-
 }
 
 /*
@@ -1778,24 +1057,6 @@ VOID	RTUSBCleanUpMLMEBulkOutQueue(
 	IN	PRTMP_ADAPTER	pAd)
 {
 	DBGPRINT(RT_DEBUG_TRACE, ("--->CleanUpMLMEBulkOutQueue\n"));
-
-#if 0	// Do nothing!
-	NdisAcquireSpinLock(&pAd->MLMEBulkOutLock);
-	while (pAd->PrioRingTxCnt > 0)
-	{
-		pAd->MLMEContext[pAd->PrioRingFirstIndex].InUse = FALSE;
-
-		pAd->PrioRingFirstIndex++;
-		if (pAd->PrioRingFirstIndex >= MGMT_RING_SIZE)
-		{
-			pAd->PrioRingFirstIndex = 0;
-		}
-
-		pAd->PrioRingTxCnt--;
-	}
-	NdisReleaseSpinLock(&pAd->MLMEBulkOutLock);
-#endif
-
 	DBGPRINT(RT_DEBUG_TRACE, ("<---CleanUpMLMEBulkOutQueue\n"));
 }
 
@@ -1906,14 +1167,6 @@ VOID	RTUSBCancelPendingBulkOutIRP(
 			RTMPusecDelay(200);
 		}
 
-#ifdef RALINK_ATE
-		pHTTXContext->bCopySavePad = 0;
-		pHTTXContext->CurWritePosition = 0;
-		pHTTXContext->CurWriteRealPos = 0;
-		pHTTXContext->bCurWriting = FALSE;
-		pHTTXContext->NextBulkOutPosition = 0;
-		pHTTXContext->ENextBulkOutPosition = 0;
-#endif // RALINK_ATE //
 		pAd->BulkOutPending[Idx] = FALSE;
 	}
 
diff --git a/drivers/staging/rt2870/common/rtusb_data.c b/drivers/staging/rt2870/common/rtusb_data.c
index 5a0d78389f4..6b003f63372 100644
--- a/drivers/staging/rt2870/common/rtusb_data.c
+++ b/drivers/staging/rt2870/common/rtusb_data.c
@@ -135,24 +135,11 @@ BOOLEAN	RTUSBNeedQueueBackForAgg(
 	RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags);
 	if ((pHTTXContext->IRPPending == TRUE)  /*&& (pAd->TxSwQueue[BulkOutPipeId].Number == 0) */)
 	{
-#if 0
-		if ((pHTTXContext->CurWritePosition <= 8) &&
-			(pHTTXContext->NextBulkOutPosition > 8 && (pHTTXContext->NextBulkOutPosition+MAX_AGGREGATION_SIZE) < MAX_TXBULK_LIMIT))
-		{
-			needQueBack = TRUE;
-		}
-		else if ((pHTTXContext->CurWritePosition < pHTTXContext->NextBulkOutPosition) &&
-				 ((pHTTXContext->NextBulkOutPosition + MAX_AGGREGATION_SIZE) < MAX_TXBULK_LIMIT))
-		{
-			needQueBack = TRUE;
-		}
-#else
 		if ((pHTTXContext->CurWritePosition < pHTTXContext->ENextBulkOutPosition) &&
 			(((pHTTXContext->ENextBulkOutPosition+MAX_AGGREGATION_SIZE) < MAX_TXBULK_LIMIT) || (pHTTXContext->CurWritePosition > MAX_AGGREGATION_SIZE)))
 		{
 			needQueBack = TRUE;
 		}
-#endif
 		else if ((pHTTXContext->CurWritePosition > pHTTXContext->ENextBulkOutPosition) &&
 				 ((pHTTXContext->ENextBulkOutPosition + MAX_AGGREGATION_SIZE) < pHTTXContext->CurWritePosition))
 		{
diff --git a/drivers/staging/rt2870/common/rtusb_io.c b/drivers/staging/rt2870/common/rtusb_io.c
index afde136a9a0..fd1b0c18f2a 100644
--- a/drivers/staging/rt2870/common/rtusb_io.c
+++ b/drivers/staging/rt2870/common/rtusb_io.c
@@ -110,6 +110,12 @@ NTSTATUS RTUSBFirmwareWrite(
 	Status = RTUSBWriteMACRegister(pAd, 0x701c, 0xffffffff);
 	Status = RTUSBFirmwareRun(pAd);
 
+#ifdef RT30xx
+	RTMPusecDelay(10000);
+	RTUSBWriteMACRegister(pAd,H2M_MAILBOX_CSR,0);
+	AsicSendCommandToMcu(pAd, 0x72, 0x00, 0x00, 0x00);//reset rf by MCU supported by new firmware
+#endif
+
 	return Status;
 }
 
@@ -665,6 +671,7 @@ NTSTATUS	RTUSBWriteRFRegister(
 	return STATUS_SUCCESS;
 }
 
+#ifndef RT30xx
 /*
 	========================================================================
 
@@ -772,6 +779,7 @@ NTSTATUS	RT30xxReadRFRegister(
 
 	return STATUS_SUCCESS;
 }
+#endif /* RT30xx */
 
 /*
 	========================================================================
@@ -796,6 +804,14 @@ NTSTATUS	RTUSBReadEEPROM(
 {
 	NTSTATUS	Status = STATUS_SUCCESS;
 
+#ifdef RT30xx
+	if(pAd->bUseEfuse)
+	{
+		Status =eFuseRead(pAd, Offset, pData, length);
+	}
+	else
+#endif // RT30xx //
+	{
 	Status = RTUSB_VendorRequest(
 		pAd,
 		(USBD_TRANSFER_DIRECTION_IN | USBD_SHORT_TRANSFER_OK),
@@ -805,6 +821,7 @@ NTSTATUS	RTUSBReadEEPROM(
 		Offset,
 		pData,
 		length);
+	}
 
 	return Status;
 }
@@ -832,6 +849,14 @@ NTSTATUS	RTUSBWriteEEPROM(
 {
 	NTSTATUS	Status = STATUS_SUCCESS;
 
+#ifdef RT30xx
+	if(pAd->bUseEfuse)
+	{
+		Status = eFuseWrite(pAd, Offset, pData, length);
+	}
+	else
+#endif // RT30xx //
+	{
 	Status = RTUSB_VendorRequest(
 		pAd,
 		USBD_TRANSFER_DIRECTION_OUT,
@@ -841,6 +866,7 @@ NTSTATUS	RTUSBWriteEEPROM(
 		Offset,
 		pData,
 		length);
+	}
 
 	return Status;
 }
@@ -957,9 +983,13 @@ NDIS_STATUS	RTUSBEnqueueCmdFromNdis(
 	PCmdQElmt	cmdqelmt = NULL;
 	POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;
 
-
+#ifndef RT30xx
 	BUG_ON(pObj->RTUSBCmdThr_task == NULL);
 	CHECK_PID_LEGALITY(task_pid(pObj->RTUSBCmdThr_task))
+#endif
+#ifdef RT30xx
+	if (pObj->RTUSBCmdThr_pid < 0)
+#endif
 		return (NDIS_STATUS_RESOURCES);
 
 	status = RTMPAllocateMemory((PVOID *)&cmdqelmt, sizeof(CmdQElmt));
@@ -1194,21 +1224,6 @@ NTSTATUS    RTUSB_VendorRequest(
 		void	*tmpBuf = TransferBuffer;
 
 		// Acquire Control token
-#ifdef INF_AMAZON_SE
-		//Semaphore fix INF_AMAZON_SE hang
-		//pAd->UsbVendorReqBuf is the swap for DEVICE_VENDOR_REQUEST_IN to fix dma bug.
-		ret = down_interruptible(&(pAd->UsbVendorReq_semaphore));
-		if (pAd->UsbVendorReqBuf)
-		{
-			ASSERT(TransferBufferLength <MAX_PARAM_BUFFER_SIZE);
-
-		   	tmpBuf = (void *)pAd->UsbVendorReqBuf;
-		   	NdisZeroMemory(pAd->UsbVendorReqBuf, TransferBufferLength);
-
-		   	if (RequestType == DEVICE_VENDOR_REQUEST_OUT)
-		   	 NdisMoveMemory(tmpBuf, TransferBuffer, TransferBufferLength);
-		}
-#endif // INF_AMAZON_SE //
 		do {
 		if( RequestType == DEVICE_VENDOR_REQUEST_OUT)
 			ret=usb_control_msg(pObj->pUsb_Dev, usb_sndctrlpipe( pObj->pUsb_Dev, 0 ), Request, RequestType, Value,Index, tmpBuf, TransferBufferLength, CONTROL_TIMEOUT_JIFFIES);
@@ -1227,12 +1242,6 @@ NTSTATUS    RTUSB_VendorRequest(
 			}
 		} while((ret < 0) && (retryCount < MAX_RETRY_COUNT));
 
-#ifdef INF_AMAZON_SE
-	  	if ((pAd->UsbVendorReqBuf) && (RequestType == DEVICE_VENDOR_REQUEST_IN))
-			NdisMoveMemory(TransferBuffer, tmpBuf, TransferBufferLength);
-	  	up(&(pAd->UsbVendorReq_semaphore));
-#endif // INF_AMAZON_SE //
-
         if (ret < 0) {
 //			DBGPRINT(RT_DEBUG_ERROR, ("USBVendorRequest failed ret=%d \n",ret));
 			DBGPRINT(RT_DEBUG_ERROR, ("RTUSB_VendorRequest failed(%d),TxFlags=0x%x, ReqType=%s, Req=0x%x, Index=0x%x\n",
@@ -1243,28 +1252,6 @@ NTSTATUS    RTUSB_VendorRequest(
 			if ((TransferBuffer!= NULL) && (TransferBufferLength > 0))
 				hex_dump("Failed TransferBuffer value", TransferBuffer, TransferBufferLength);
         }
-
-#if 0
-        // retry
-		if (ret < 0) {
-			int temp_i=0;
-			DBGPRINT(RT_DEBUG_ERROR, ("USBVendorRequest failed ret=%d, \n",ret));
-			ret = 0;
-			do
-			{
-				if( RequestType == DEVICE_VENDOR_REQUEST_OUT)
-					ret=usb_control_msg(pObj->pUsb_Dev, usb_sndctrlpipe( pObj->pUsb_Dev, 0 ), Request, RequestType, Value,Index, TransferBuffer, TransferBufferLength, CONTROL_TIMEOUT_JIFFIES);
-				else if(RequestType == DEVICE_VENDOR_REQUEST_IN)
-					ret=usb_control_msg(pObj->pUsb_Dev, usb_rcvctrlpipe( pObj->pUsb_Dev, 0 ), Request, RequestType, Value,Index, TransferBuffer, TransferBufferLength, CONTROL_TIMEOUT_JIFFIES);
-				temp_i++;
-			} while( (ret < 0) && (temp_i <= 1) );
-
-			if( ret >= 0)
-				return ret;
-
-		}
-#endif
-
 	}
 	return ret;
 }
@@ -1324,21 +1311,8 @@ VOID CMDHandler(
 			{
 				case CMDTHREAD_CHECK_GPIO:
 					{
-#ifdef CONFIG_STA_SUPPORT
 						UINT32 data;
-#endif // CONFIG_STA_SUPPORT //
-#ifdef RALINK_ATE
-       					if(ATE_ON(pAd))
-						{
-							DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-							break;
-						}
-#endif // RALINK_ATE //
-
-#ifdef CONFIG_STA_SUPPORT
 
-
-						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 						{
 							// Read GPIO pin2 as Hardware controlled radio state
 
@@ -1374,17 +1348,14 @@ VOID CMDHandler(
 								}
 							}
 						}
-#endif // CONFIG_STA_SUPPORT //
 					}
 					break;
 
-#ifdef CONFIG_STA_SUPPORT
 				case CMDTHREAD_QKERIODIC_EXECUT:
 					{
 						StaQuickResponeForRateUpExec(NULL, pAd, NULL, NULL);
 					}
 					break;
-#endif // CONFIG_STA_SUPPORT //
 
 				case CMDTHREAD_RESET_BULK_OUT:
 					{
@@ -1394,9 +1365,7 @@ VOID CMDHandler(
 						PHT_TX_CONTEXT	pHTTXContext;
 //						RTMP_TX_RING *pTxRing;
 						unsigned long IrqFlags;
-#ifdef RALINK_ATE
-						PTX_CONTEXT		pNullContext = &(pAd->NullContext);
-#endif // RALINK_ATE //
+
 						DBGPRINT_RAW(RT_DEBUG_TRACE, ("CmdThread : CMDTHREAD_RESET_BULK_OUT(ResetPipeid=0x%0x)===>\n", pAd->bulkResetPipeid));
 						// All transfers must be aborted or cancelled before attempting to reset the pipe.
 						//RTUSBCancelPendingBulkOutIRP(pAd);
@@ -1459,32 +1428,6 @@ VOID CMDHandler(
 								//NdisReleaseSpinLock(&pAd->BulkOutLock[pAd->bulkResetPipeid]);
 								RTMP_INT_UNLOCK(&pAd->BulkOutLock[pAd->bulkResetPipeid], IrqFlags);
 /*-----------------------------------------------------------------------------------------------*/
-#ifdef RALINK_ATE
-								if(ATE_ON(pAd))
-							    {
-									pNullContext->IRPPending = TRUE;
-									//
-									// If driver is still in ATE TXFRAME mode,
-									// keep on transmitting ATE frames.
-									//
-									DBGPRINT_RAW(RT_DEBUG_TRACE, ("pAd->ate.Mode == %d\npAd->ContinBulkOut == %d\npAd->BulkOutRemained == %d\n", pAd->ate.Mode, pAd->ContinBulkOut, atomic_read(&pAd->BulkOutRemained)));
-									if((pAd->ate.Mode == ATE_TXFRAME) && ((pAd->ContinBulkOut == TRUE) || (atomic_read(&pAd->BulkOutRemained) > 0)))
-								    {
-										DBGPRINT_RAW(RT_DEBUG_TRACE, ("After CMDTHREAD_RESET_BULK_OUT, continue to bulk out frames !\n"));
-
-										// Init Tx context descriptor
-										RTUSBInitTxDesc(pAd, pNullContext, 0/* pAd->bulkResetPipeid */, (usb_complete_t)ATE_RTUSBBulkOutDataPacketComplete);
-
-										if((ret = RTUSB_SUBMIT_URB(pNullContext->pUrb))!=0)
-										{
-											DBGPRINT(RT_DEBUG_ERROR, ("ATE_RTUSBBulkOutDataPacket: Submit Tx URB failed %d\n", ret));
-										}
-
-										pAd->BulkOutReq++;
-									}
-								}
-								else
-#endif // RALINK_ATE //
 /*-----------------------------------------------------------------------------------------------*/
 								{
 								RTUSBInitHTTxDesc(pAd, pHTTXContext, pAd->bulkResetPipeid, pHTTXContext->BulkOutSize, (usb_complete_t)RTUSBBulkOutDataPacketComplete);
@@ -1597,19 +1540,6 @@ VOID CMDHandler(
 					{
 						UINT32		MACValue;
 /*-----------------------------------------------------------------------------------------------*/
-#ifdef RALINK_ATE
-						if (ATE_ON(pAd))
-						{
-							if((pAd->PendingRx > 0) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
-							{
-								DBGPRINT_RAW(RT_DEBUG_ERROR, ("ATE : BulkIn IRP Pending!!!\n"));
-								ATE_RTUSBCancelPendingBulkInIRP(pAd);
-								RTMPusecDelay(100000);
-								pAd->PendingRx = 0;
-							}
-						}
-						else
-#endif // RALINK_ATE //
 /*-----------------------------------------------------------------------------------------------*/
 						{
 						//while ((atomic_read(&pAd->PendingRx) > 0) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
@@ -1699,15 +1629,6 @@ VOID CMDHandler(
 								}
 								else
 								{	// success
-#if 0
-									RTMP_IRQ_LOCK(&pAd->BulkInLock, IrqFlags);
-									pRxContext->IRPPending = TRUE;
-									//NdisInterlockedIncrement(&pAd->PendingRx);
-									pAd->PendingRx++;
-									RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
-									pAd->BulkInReq++;
-#endif
-									//printk("BIDone, Pend=%d,BIIdx=%d,BIRIdx=%d!\n", pAd->PendingRx, pAd->NextRxBulkInIndex, pAd->NextRxBulkInReadIndex);
 									DBGPRINT_RAW(RT_DEBUG_TRACE, ("CMDTHREAD_RESET_BULK_IN: Submit Rx URB Done, status=%d!\n", pUrb->status));
 									ASSERT((pRxContext->InUse == pRxContext->IRPPending));
 								}
@@ -1765,7 +1686,6 @@ VOID CMDHandler(
 
 				case CMDTHREAD_SET_ASIC_WCID_CIPHER:
 					{
-#ifdef CONFIG_STA_SUPPORT
 						RT_SET_ASIC_WCID_ATTRI	SetAsicWcidAttri;
 						USHORT		offset;
 						UINT32		MACRValue = 0;
@@ -1817,46 +1737,46 @@ VOID CMDHandler(
 
 							RTUSBWriteMACRegister(pAd, SHARED_KEY_MODE_BASE+4*(0/2), csr1.word);
 						}
-#endif // CONFIG_STA_SUPPORT //
 					}
 					break;
 
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-				// avoid in interrupt when write key
+#ifdef RT30xx
+//Benson modified for USB interface, avoid in interrupt when write key, 20080724 -->
 				case RT_CMD_SET_KEY_TABLE: //General call for AsicAddPairwiseKeyEntry()
-					{
-						RT_ADD_PAIRWISE_KEY_ENTRY KeyInfo;
-						KeyInfo  = *((PRT_ADD_PAIRWISE_KEY_ENTRY)(pData));
-						AsicAddPairwiseKeyEntry(pAd,
-												KeyInfo.MacAddr,
-												(UCHAR)KeyInfo.MacTabMatchWCID,
-												&KeyInfo.CipherKey);
-					}
+				{
+					RT_ADD_PAIRWISE_KEY_ENTRY KeyInfo;
+					KeyInfo = *((PRT_ADD_PAIRWISE_KEY_ENTRY)(pData));
+					AsicAddPairwiseKeyEntry(pAd,
+											KeyInfo.MacAddr,
+											(UCHAR)KeyInfo.MacTabMatchWCID,
+											&KeyInfo.CipherKey);
+				}
 					break;
-
 				case RT_CMD_SET_RX_WCID_TABLE: //General call for RTMPAddWcidAttributeEntry()
-					{
-						PMAC_TABLE_ENTRY pEntry ;
-						pEntry = (PMAC_TABLE_ENTRY)(pData);
-						RTMPAddWcidAttributeEntry(pAd,
-													BSS0,
-													0,
-													pEntry->PairwiseKey.CipherAlg,
-													pEntry);
+				{
+					PMAC_TABLE_ENTRY pEntry;
+					UCHAR KeyIdx;
+					UCHAR CipherAlg;
+					UCHAR ApIdx;
+
+					pEntry = (PMAC_TABLE_ENTRY)(pData);
+
+						RTMPAddWcidAttributeEntry(
+										  pAd,
+										  ApIdx,
+										  KeyIdx,
+										  CipherAlg,
+										  pEntry);
 					}
-					break;
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
+						break;
+//Benson modified for USB interface, avoid in interrupt when write key, 20080724 <--
+#endif
 
 				case CMDTHREAD_SET_CLIENT_MAC_ENTRY:
 					{
 						MAC_TABLE_ENTRY *pEntry;
 						pEntry = (MAC_TABLE_ENTRY *)pData;
 
-
-#ifdef CONFIG_STA_SUPPORT
-						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 						{
 							AsicRemovePairwiseKeyEntry(pAd, pEntry->apidx, (UCHAR)pEntry->Aid);
 							if ((pEntry->AuthMode <= Ndis802_11AuthModeAutoSwitch) && (pEntry->WepStatus == Ndis802_11Encryption1Enabled))
@@ -1891,7 +1811,6 @@ VOID CMDHandler(
 								RTUSBWriteMACRegister(pAd, offset, 0);
 							}
 						}
-#endif // CONFIG_STA_SUPPORT //
 
 						AsicUpdateRxWCIDTable(pAd, pEntry->Aid, pEntry->Addr);
 						printk("UpdateRxWCIDTable(): Aid=%d, Addr=%02x:%02x:%02x:%02x:%02x:%02x!\n", pEntry->Aid,
@@ -1899,9 +1818,18 @@ VOID CMDHandler(
 					}
 					break;
 
+#ifdef RT30xx
+// add by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet
+				case CMDTHREAD_UPDATE_PROTECT:
+					{
+						AsicUpdateProtect(pAd, 0, (ALLN_SETPROTECT), TRUE, 0);
+					}
+					break;
+// end johnli
+#endif
+
 				case OID_802_11_ADD_WEP:
 					{
-#ifdef CONFIG_STA_SUPPORT
 						UINT	i;
 						UINT32	KeyIdx;
 						PNDIS_802_11_WEP	pWepKey;
@@ -1975,7 +1903,6 @@ VOID CMDHandler(
 							AsicAddSharedKeyEntry(pAd, BSS0, (UCHAR)KeyIdx, CipherAlg, pWepKey->KeyMaterial, NULL, NULL);
 							DBGPRINT(RT_DEBUG_TRACE, ("CmdThread::OID_802_11_ADD_WEP (KeyIdx=%d, Len=%d-byte)\n", KeyIdx, pWepKey->KeyLength));
 						}
-#endif // CONFIG_STA_SUPPORT //
 					}
 					break;
 
diff --git a/drivers/staging/rt2870/common/spectrum.c b/drivers/staging/rt2870/common/spectrum.c
index 74380958eb7..1cf2c263f45 100644
--- a/drivers/staging/rt2870/common/spectrum.c
+++ b/drivers/staging/rt2870/common/spectrum.c
@@ -1,1876 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-	action.c
-
-    Abstract:
-    Handle association related requests either from WSTA or from local MLME
-
-    Revision History:
-    Who          When          What
-    ---------    ----------    ----------------------------------------------
-	Fonchi Wu    2008	  	   created for 802.11h
- */
-
-#include "../rt_config.h"
-#include "action.h"
-
-VOID MeasureReqTabInit(
-	IN PRTMP_ADAPTER pAd)
-{
-	NdisAllocateSpinLock(&pAd->CommonCfg.MeasureReqTabLock);
-
-	pAd->CommonCfg.pMeasureReqTab = kmalloc(sizeof(MEASURE_REQ_TAB), GFP_ATOMIC);
-	if (pAd->CommonCfg.pMeasureReqTab)
-		NdisZeroMemory(pAd->CommonCfg.pMeasureReqTab, sizeof(MEASURE_REQ_TAB));
-	else
-		DBGPRINT(RT_DEBUG_ERROR, ("%s Fail to alloc memory for pAd->CommonCfg.pMeasureReqTab.\n", __func__));
-
-	return;
-}
-
-VOID MeasureReqTabExit(
-	IN PRTMP_ADAPTER pAd)
-{
-	NdisFreeSpinLock(pAd->CommonCfg.MeasureReqTabLock);
-
-	if (pAd->CommonCfg.pMeasureReqTab)
-		kfree(pAd->CommonCfg.pMeasureReqTab);
-	pAd->CommonCfg.pMeasureReqTab = NULL;
-
-	return;
-}
-
-static PMEASURE_REQ_ENTRY MeasureReqLookUp(
-	IN PRTMP_ADAPTER	pAd,
-	IN UINT8			DialogToken)
-{
-	UINT HashIdx;
-	PMEASURE_REQ_TAB pTab = pAd->CommonCfg.pMeasureReqTab;
-	PMEASURE_REQ_ENTRY pEntry = NULL;
-	PMEASURE_REQ_ENTRY pPrevEntry = NULL;
-
-	if (pTab == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("%s: pMeasureReqTab doesn't exist.\n", __func__));
-		return NULL;
-	}
-
-	RTMP_SEM_LOCK(&pAd->CommonCfg.MeasureReqTabLock);
-
-	HashIdx = MQ_DIALOGTOKEN_HASH_INDEX(DialogToken);
-	pEntry = pTab->Hash[HashIdx];
-
-	while (pEntry)
-	{
-		if (pEntry->DialogToken == DialogToken)
-			break;
-		else
-		{
-			pPrevEntry = pEntry;
-			pEntry = pEntry->pNext;
-		}
-	}
-
-	RTMP_SEM_UNLOCK(&pAd->CommonCfg.MeasureReqTabLock);
-
-	return pEntry;
-}
-
-static PMEASURE_REQ_ENTRY MeasureReqInsert(
-	IN PRTMP_ADAPTER	pAd,
-	IN UINT8			DialogToken)
-{
-	INT i;
-	ULONG HashIdx;
-	PMEASURE_REQ_TAB pTab = pAd->CommonCfg.pMeasureReqTab;
-	PMEASURE_REQ_ENTRY pEntry = NULL, pCurrEntry;
-	ULONG Now;
-
-	if(pTab == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("%s: pMeasureReqTab doesn't exist.\n", __func__));
-		return NULL;
-	}
-
-	pEntry = MeasureReqLookUp(pAd, DialogToken);
-	if (pEntry == NULL)
-	{
-		RTMP_SEM_LOCK(&pAd->CommonCfg.MeasureReqTabLock);
-		for (i = 0; i < MAX_MEASURE_REQ_TAB_SIZE; i++)
-		{
-			NdisGetSystemUpTime(&Now);
-			pEntry = &pTab->Content[i];
-
-			if ((pEntry->Valid == TRUE)
-				&& RTMP_TIME_AFTER((unsigned long)Now, (unsigned long)(pEntry->lastTime + MQ_REQ_AGE_OUT)))
-			{
-				PMEASURE_REQ_ENTRY pPrevEntry = NULL;
-				ULONG HashIdx = MQ_DIALOGTOKEN_HASH_INDEX(pEntry->DialogToken);
-				PMEASURE_REQ_ENTRY pProbeEntry = pTab->Hash[HashIdx];
-
-				// update Hash list
-				do
-				{
-					if (pProbeEntry == pEntry)
-					{
-						if (pPrevEntry == NULL)
-						{
-							pTab->Hash[HashIdx] = pEntry->pNext;
-						}
-						else
-						{
-							pPrevEntry->pNext = pEntry->pNext;
-						}
-						break;
-					}
-
-					pPrevEntry = pProbeEntry;
-					pProbeEntry = pProbeEntry->pNext;
-				} while (pProbeEntry);
-
-				NdisZeroMemory(pEntry, sizeof(MEASURE_REQ_ENTRY));
-				pTab->Size--;
-
-				break;
-			}
-
-			if (pEntry->Valid == FALSE)
-				break;
-		}
-
-		if (i < MAX_MEASURE_REQ_TAB_SIZE)
-		{
-			NdisGetSystemUpTime(&Now);
-			pEntry->lastTime = Now;
-			pEntry->Valid = TRUE;
-			pEntry->DialogToken = DialogToken;
-			pTab->Size++;
-		}
-		else
-		{
-			pEntry = NULL;
-			DBGPRINT(RT_DEBUG_ERROR, ("%s: pMeasureReqTab tab full.\n", __func__));
-		}
-
-		// add this Neighbor entry into HASH table
-		if (pEntry)
-		{
-			HashIdx = MQ_DIALOGTOKEN_HASH_INDEX(DialogToken);
-			if (pTab->Hash[HashIdx] == NULL)
-			{
-				pTab->Hash[HashIdx] = pEntry;
-			}
-			else
-			{
-				pCurrEntry = pTab->Hash[HashIdx];
-				while (pCurrEntry->pNext != NULL)
-					pCurrEntry = pCurrEntry->pNext;
-				pCurrEntry->pNext = pEntry;
-			}
-		}
-
-		RTMP_SEM_UNLOCK(&pAd->CommonCfg.MeasureReqTabLock);
-	}
-
-	return pEntry;
-}
-
-static VOID MeasureReqDelete(
-	IN PRTMP_ADAPTER	pAd,
-	IN UINT8			DialogToken)
-{
-	PMEASURE_REQ_TAB pTab = pAd->CommonCfg.pMeasureReqTab;
-	PMEASURE_REQ_ENTRY pEntry = NULL;
-
-	if(pTab == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("%s: pMeasureReqTab doesn't exist.\n", __func__));
-		return;
-	}
-
-	// if empty, return
-	if (pTab->Size == 0)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("pMeasureReqTab empty.\n"));
-		return;
-	}
-
-	pEntry = MeasureReqLookUp(pAd, DialogToken);
-	if (pEntry != NULL)
-	{
-		PMEASURE_REQ_ENTRY pPrevEntry = NULL;
-		ULONG HashIdx = MQ_DIALOGTOKEN_HASH_INDEX(pEntry->DialogToken);
-		PMEASURE_REQ_ENTRY pProbeEntry = pTab->Hash[HashIdx];
-
-		RTMP_SEM_LOCK(&pAd->CommonCfg.MeasureReqTabLock);
-		// update Hash list
-		do
-		{
-			if (pProbeEntry == pEntry)
-			{
-				if (pPrevEntry == NULL)
-				{
-					pTab->Hash[HashIdx] = pEntry->pNext;
-				}
-				else
-				{
-					pPrevEntry->pNext = pEntry->pNext;
-				}
-				break;
-			}
-
-			pPrevEntry = pProbeEntry;
-			pProbeEntry = pProbeEntry->pNext;
-		} while (pProbeEntry);
-
-		NdisZeroMemory(pEntry, sizeof(MEASURE_REQ_ENTRY));
-		pTab->Size--;
-
-		RTMP_SEM_UNLOCK(&pAd->CommonCfg.MeasureReqTabLock);
-	}
-
-	return;
-}
-
-VOID TpcReqTabInit(
-	IN PRTMP_ADAPTER pAd)
-{
-	NdisAllocateSpinLock(&pAd->CommonCfg.TpcReqTabLock);
-
-	pAd->CommonCfg.pTpcReqTab = kmalloc(sizeof(TPC_REQ_TAB), GFP_ATOMIC);
-	if (pAd->CommonCfg.pTpcReqTab)
-		NdisZeroMemory(pAd->CommonCfg.pTpcReqTab, sizeof(TPC_REQ_TAB));
-	else
-		DBGPRINT(RT_DEBUG_ERROR, ("%s Fail to alloc memory for pAd->CommonCfg.pTpcReqTab.\n", __func__));
-
-	return;
-}
-
-VOID TpcReqTabExit(
-	IN PRTMP_ADAPTER pAd)
-{
-	NdisFreeSpinLock(pAd->CommonCfg.TpcReqTabLock);
-
-	if (pAd->CommonCfg.pTpcReqTab)
-		kfree(pAd->CommonCfg.pTpcReqTab);
-	pAd->CommonCfg.pTpcReqTab = NULL;
-
-	return;
-}
-
-static PTPC_REQ_ENTRY TpcReqLookUp(
-	IN PRTMP_ADAPTER	pAd,
-	IN UINT8			DialogToken)
-{
-	UINT HashIdx;
-	PTPC_REQ_TAB pTab = pAd->CommonCfg.pTpcReqTab;
-	PTPC_REQ_ENTRY pEntry = NULL;
-	PTPC_REQ_ENTRY pPrevEntry = NULL;
-
-	if (pTab == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("%s: pTpcReqTab doesn't exist.\n", __func__));
-		return NULL;
-	}
-
-	RTMP_SEM_LOCK(&pAd->CommonCfg.TpcReqTabLock);
-
-	HashIdx = TPC_DIALOGTOKEN_HASH_INDEX(DialogToken);
-	pEntry = pTab->Hash[HashIdx];
-
-	while (pEntry)
-	{
-		if (pEntry->DialogToken == DialogToken)
-			break;
-		else
-		{
-			pPrevEntry = pEntry;
-			pEntry = pEntry->pNext;
-		}
-	}
-
-	RTMP_SEM_UNLOCK(&pAd->CommonCfg.TpcReqTabLock);
-
-	return pEntry;
-}
-
-
-static PTPC_REQ_ENTRY TpcReqInsert(
-	IN PRTMP_ADAPTER	pAd,
-	IN UINT8			DialogToken)
-{
-	INT i;
-	ULONG HashIdx;
-	PTPC_REQ_TAB pTab = pAd->CommonCfg.pTpcReqTab;
-	PTPC_REQ_ENTRY pEntry = NULL, pCurrEntry;
-	ULONG Now;
-
-	if(pTab == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("%s: pTpcReqTab doesn't exist.\n", __func__));
-		return NULL;
-	}
-
-	pEntry = TpcReqLookUp(pAd, DialogToken);
-	if (pEntry == NULL)
-	{
-		RTMP_SEM_LOCK(&pAd->CommonCfg.TpcReqTabLock);
-		for (i = 0; i < MAX_TPC_REQ_TAB_SIZE; i++)
-		{
-			NdisGetSystemUpTime(&Now);
-			pEntry = &pTab->Content[i];
-
-			if ((pEntry->Valid == TRUE)
-				&& RTMP_TIME_AFTER((unsigned long)Now, (unsigned long)(pEntry->lastTime + TPC_REQ_AGE_OUT)))
-			{
-				PTPC_REQ_ENTRY pPrevEntry = NULL;
-				ULONG HashIdx = TPC_DIALOGTOKEN_HASH_INDEX(pEntry->DialogToken);
-				PTPC_REQ_ENTRY pProbeEntry = pTab->Hash[HashIdx];
-
-				// update Hash list
-				do
-				{
-					if (pProbeEntry == pEntry)
-					{
-						if (pPrevEntry == NULL)
-						{
-							pTab->Hash[HashIdx] = pEntry->pNext;
-						}
-						else
-						{
-							pPrevEntry->pNext = pEntry->pNext;
-						}
-						break;
-					}
-
-					pPrevEntry = pProbeEntry;
-					pProbeEntry = pProbeEntry->pNext;
-				} while (pProbeEntry);
-
-				NdisZeroMemory(pEntry, sizeof(TPC_REQ_ENTRY));
-				pTab->Size--;
-
-				break;
-			}
-
-			if (pEntry->Valid == FALSE)
-				break;
-		}
-
-		if (i < MAX_TPC_REQ_TAB_SIZE)
-		{
-			NdisGetSystemUpTime(&Now);
-			pEntry->lastTime = Now;
-			pEntry->Valid = TRUE;
-			pEntry->DialogToken = DialogToken;
-			pTab->Size++;
-		}
-		else
-		{
-			pEntry = NULL;
-			DBGPRINT(RT_DEBUG_ERROR, ("%s: pTpcReqTab tab full.\n", __func__));
-		}
-
-		// add this Neighbor entry into HASH table
-		if (pEntry)
-		{
-			HashIdx = TPC_DIALOGTOKEN_HASH_INDEX(DialogToken);
-			if (pTab->Hash[HashIdx] == NULL)
-			{
-				pTab->Hash[HashIdx] = pEntry;
-			}
-			else
-			{
-				pCurrEntry = pTab->Hash[HashIdx];
-				while (pCurrEntry->pNext != NULL)
-					pCurrEntry = pCurrEntry->pNext;
-				pCurrEntry->pNext = pEntry;
-			}
-		}
-
-		RTMP_SEM_UNLOCK(&pAd->CommonCfg.TpcReqTabLock);
-	}
-
-	return pEntry;
-}
-
-static VOID TpcReqDelete(
-	IN PRTMP_ADAPTER	pAd,
-	IN UINT8			DialogToken)
-{
-	PTPC_REQ_TAB pTab = pAd->CommonCfg.pTpcReqTab;
-	PTPC_REQ_ENTRY pEntry = NULL;
-
-	if(pTab == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("%s: pTpcReqTab doesn't exist.\n", __func__));
-		return;
-	}
-
-	// if empty, return
-	if (pTab->Size == 0)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("pTpcReqTab empty.\n"));
-		return;
-	}
-
-	pEntry = TpcReqLookUp(pAd, DialogToken);
-	if (pEntry != NULL)
-	{
-		PTPC_REQ_ENTRY pPrevEntry = NULL;
-		ULONG HashIdx = TPC_DIALOGTOKEN_HASH_INDEX(pEntry->DialogToken);
-		PTPC_REQ_ENTRY pProbeEntry = pTab->Hash[HashIdx];
-
-		RTMP_SEM_LOCK(&pAd->CommonCfg.TpcReqTabLock);
-		// update Hash list
-		do
-		{
-			if (pProbeEntry == pEntry)
-			{
-				if (pPrevEntry == NULL)
-				{
-					pTab->Hash[HashIdx] = pEntry->pNext;
-				}
-				else
-				{
-					pPrevEntry->pNext = pEntry->pNext;
-				}
-				break;
-			}
-
-			pPrevEntry = pProbeEntry;
-			pProbeEntry = pProbeEntry->pNext;
-		} while (pProbeEntry);
-
-		NdisZeroMemory(pEntry, sizeof(TPC_REQ_ENTRY));
-		pTab->Size--;
-
-		RTMP_SEM_UNLOCK(&pAd->CommonCfg.TpcReqTabLock);
-	}
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		Get Current TimeS tamp.
-
-	Parametrs:
-
-	Return	: Current Time Stamp.
-	==========================================================================
- */
-static UINT64 GetCurrentTimeStamp(
-	IN PRTMP_ADAPTER pAd)
-{
-	// get current time stamp.
-	return 0;
-}
-
-/*
-	==========================================================================
-	Description:
-		Get Current Transmit Power.
-
-	Parametrs:
-
-	Return	: Current Time Stamp.
-	==========================================================================
- */
-static UINT8 GetCurTxPwr(
-	IN PRTMP_ADAPTER pAd,
-	IN UINT8 Wcid)
-{
-	return 16; /* 16 dBm */
-}
-
-/*
-	==========================================================================
-	Description:
-		Insert Dialog Token into frame.
-
-	Parametrs:
-		1. frame buffer pointer.
-		2. frame length.
-		3. Dialog token.
-
-	Return	: None.
-	==========================================================================
- */
-static VOID InsertDialogToken(
-	IN PRTMP_ADAPTER pAd,
-	OUT PUCHAR pFrameBuf,
-	OUT PULONG pFrameLen,
-	IN UINT8 DialogToken)
-{
-	ULONG TempLen;
-	MakeOutgoingFrame(pFrameBuf,	&TempLen,
-					1,				&DialogToken,
-					END_OF_ARGS);
-
-	*pFrameLen = *pFrameLen + TempLen;
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		Insert TPC Request IE into frame.
-
-	Parametrs:
-		1. frame buffer pointer.
-		2. frame length.
-
-	Return	: None.
-	==========================================================================
- */
- static VOID InsertTpcReqIE(
-	IN PRTMP_ADAPTER pAd,
-	OUT PUCHAR pFrameBuf,
-	OUT PULONG pFrameLen)
-{
-	ULONG TempLen;
-	ULONG Len = 0;
-	UINT8 ElementID = IE_TPC_REQUEST;
-
-	MakeOutgoingFrame(pFrameBuf,					&TempLen,
-						1,							&ElementID,
-						1,							&Len,
-						END_OF_ARGS);
-
-	*pFrameLen = *pFrameLen + TempLen;
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		Insert TPC Report IE into frame.
-
-	Parametrs:
-		1. frame buffer pointer.
-		2. frame length.
-		3. Transmit Power.
-		4. Link Margin.
-
-	Return	: None.
-	==========================================================================
- */
- static VOID InsertTpcReportIE(
-	IN PRTMP_ADAPTER pAd,
-	OUT PUCHAR pFrameBuf,
-	OUT PULONG pFrameLen,
-	IN UINT8 TxPwr,
-	IN UINT8 LinkMargin)
-{
-	ULONG TempLen;
-	ULONG Len = sizeof(TPC_REPORT_INFO);
-	UINT8 ElementID = IE_TPC_REPORT;
-	TPC_REPORT_INFO TpcReportIE;
-
-	TpcReportIE.TxPwr = TxPwr;
-	TpcReportIE.LinkMargin = LinkMargin;
-
-	MakeOutgoingFrame(pFrameBuf,					&TempLen,
-						1,							&ElementID,
-						1,							&Len,
-						Len,						&TpcReportIE,
-						END_OF_ARGS);
-
-	*pFrameLen = *pFrameLen + TempLen;
-
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		Insert Channel Switch Announcement IE into frame.
-
-	Parametrs:
-		1. frame buffer pointer.
-		2. frame length.
-		3. channel switch announcement mode.
-		4. new selected channel.
-		5. channel switch announcement count.
-
-	Return	: None.
-	==========================================================================
- */
-static VOID InsertChSwAnnIE(
-	IN PRTMP_ADAPTER pAd,
-	OUT PUCHAR pFrameBuf,
-	OUT PULONG pFrameLen,
-	IN UINT8 ChSwMode,
-	IN UINT8 NewChannel,
-	IN UINT8 ChSwCnt)
-{
-	ULONG TempLen;
-	ULONG Len = sizeof(CH_SW_ANN_INFO);
-	UINT8 ElementID = IE_CHANNEL_SWITCH_ANNOUNCEMENT;
-	CH_SW_ANN_INFO ChSwAnnIE;
-
-	ChSwAnnIE.ChSwMode = ChSwMode;
-	ChSwAnnIE.Channel = NewChannel;
-	ChSwAnnIE.ChSwCnt = ChSwCnt;
-
-	MakeOutgoingFrame(pFrameBuf,				&TempLen,
-						1,						&ElementID,
-						1,						&Len,
-						Len,					&ChSwAnnIE,
-						END_OF_ARGS);
-
-	*pFrameLen = *pFrameLen + TempLen;
-
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		Insert Measure Request IE into frame.
-
-	Parametrs:
-		1. frame buffer pointer.
-		2. frame length.
-		3. Measure Token.
-		4. Measure Request Mode.
-		5. Measure Request Type.
-		6. Measure Channel.
-		7. Measure Start time.
-		8. Measure Duration.
-
-
-	Return	: None.
-	==========================================================================
- */
-static VOID InsertMeasureReqIE(
-	IN PRTMP_ADAPTER pAd,
-	OUT PUCHAR pFrameBuf,
-	OUT PULONG pFrameLen,
-	IN PMEASURE_REQ_INFO pMeasureReqIE)
-{
-	ULONG TempLen;
-	UINT8 Len = sizeof(MEASURE_REQ_INFO);
-	UINT8 ElementID = IE_MEASUREMENT_REQUEST;
-
-	MakeOutgoingFrame(pFrameBuf,					&TempLen,
-						1,							&ElementID,
-						1,							&Len,
-						Len,						pMeasureReqIE,
-						END_OF_ARGS);
-
-	*pFrameLen = *pFrameLen + TempLen;
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		Insert Measure Report IE into frame.
-
-	Parametrs:
-		1. frame buffer pointer.
-		2. frame length.
-		3. Measure Token.
-		4. Measure Request Mode.
-		5. Measure Request Type.
-		6. Length of Report Infomation
-		7. Pointer of Report Infomation Buffer.
-
-	Return	: None.
-	==========================================================================
- */
-static VOID InsertMeasureReportIE(
-	IN PRTMP_ADAPTER pAd,
-	OUT PUCHAR pFrameBuf,
-	OUT PULONG pFrameLen,
-	IN PMEASURE_REPORT_INFO pMeasureReportIE,
-	IN UINT8 ReportLnfoLen,
-	IN PUINT8 pReportInfo)
-{
-	ULONG TempLen;
-	ULONG Len;
-	UINT8 ElementID = IE_MEASUREMENT_REPORT;
-
-	Len = sizeof(MEASURE_REPORT_INFO) + ReportLnfoLen;
-
-	MakeOutgoingFrame(pFrameBuf,					&TempLen,
-						1,							&ElementID,
-						1,							&Len,
-						Len,						pMeasureReportIE,
-						END_OF_ARGS);
-
-	*pFrameLen = *pFrameLen + TempLen;
-
-	if ((ReportLnfoLen > 0) && (pReportInfo != NULL))
-	{
-		MakeOutgoingFrame(pFrameBuf + *pFrameLen,		&TempLen,
-							ReportLnfoLen,				pReportInfo,
-							END_OF_ARGS);
-
-		*pFrameLen = *pFrameLen + TempLen;
-	}
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		Prepare Measurement request action frame and enqueue it into
-		management queue waiting for transmition.
-
-	Parametrs:
-		1. the destination mac address of the frame.
-
-	Return	: None.
-	==========================================================================
- */
-VOID EnqueueMeasurementReq(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pDA,
-	IN UINT8 MeasureToken,
-	IN UINT8 MeasureReqMode,
-	IN UINT8 MeasureReqType,
-	IN UINT8 MeasureCh,
-	IN UINT16 MeasureDuration)
-{
-	PUCHAR pOutBuffer = NULL;
-	NDIS_STATUS NStatus;
-	ULONG FrameLen;
-	HEADER_802_11 ActHdr;
-	MEASURE_REQ_INFO MeasureReqIE;
-	UINT8 RmReqDailogToken = RandomByte(pAd);
-	UINT64 MeasureStartTime = GetCurrentTimeStamp(pAd);
-
-	// build action frame header.
-	MgtMacHeaderInit(pAd, &ActHdr, SUBTYPE_ACTION, 0, pDA,
-						pAd->CurrentAddress);
-
-	NStatus = MlmeAllocateMemory(pAd, (PVOID)&pOutBuffer);  //Get an unused nonpaged memory
-	if(NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("%s() allocate memory failed \n", __func__));
-		return;
-	}
-	NdisMoveMemory(pOutBuffer, (PCHAR)&ActHdr, sizeof(HEADER_802_11));
-	FrameLen = sizeof(HEADER_802_11);
-
-	InsertActField(pAd, (pOutBuffer + FrameLen), &FrameLen, CATEGORY_SPECTRUM, SPEC_MRQ);
-
-	// fill Dialog Token
-	InsertDialogToken(pAd, (pOutBuffer + FrameLen), &FrameLen, MeasureToken);
-
-	// prepare Measurement IE.
-	NdisZeroMemory(&MeasureReqIE, sizeof(MEASURE_REQ_INFO));
-	MeasureReqIE.Token = RmReqDailogToken;
-	MeasureReqIE.ReqMode.word = MeasureReqMode;
-	MeasureReqIE.ReqType = MeasureReqType;
-	MeasureReqIE.MeasureReq.ChNum = MeasureCh;
-	MeasureReqIE.MeasureReq.MeasureStartTime = cpu2le64(MeasureStartTime);
-	MeasureReqIE.MeasureReq.MeasureDuration = cpu2le16(MeasureDuration);
-	InsertMeasureReqIE(pAd, (pOutBuffer + FrameLen), &FrameLen, &MeasureReqIE);
-
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		Prepare Measurement report action frame and enqueue it into
-		management queue waiting for transmition.
-
-	Parametrs:
-		1. the destination mac address of the frame.
-
-	Return	: None.
-	==========================================================================
- */
-VOID EnqueueMeasurementRep(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pDA,
-	IN UINT8 DialogToken,
-	IN UINT8 MeasureToken,
-	IN UINT8 MeasureReqMode,
-	IN UINT8 MeasureReqType,
-	IN UINT8 ReportInfoLen,
-	IN PUINT8 pReportInfo)
-{
-	PUCHAR pOutBuffer = NULL;
-	NDIS_STATUS NStatus;
-	ULONG FrameLen;
-	HEADER_802_11 ActHdr;
-	MEASURE_REPORT_INFO MeasureRepIE;
-
-	// build action frame header.
-	MgtMacHeaderInit(pAd, &ActHdr, SUBTYPE_ACTION, 0, pDA,
-						pAd->CurrentAddress);
-
-	NStatus = MlmeAllocateMemory(pAd, (PVOID)&pOutBuffer);  //Get an unused nonpaged memory
-	if(NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("%s() allocate memory failed \n", __func__));
-		return;
-	}
-	NdisMoveMemory(pOutBuffer, (PCHAR)&ActHdr, sizeof(HEADER_802_11));
-	FrameLen = sizeof(HEADER_802_11);
-
-	InsertActField(pAd, (pOutBuffer + FrameLen), &FrameLen, CATEGORY_SPECTRUM, SPEC_MRP);
-
-	// fill Dialog Token
-	InsertDialogToken(pAd, (pOutBuffer + FrameLen), &FrameLen, DialogToken);
-
-	// prepare Measurement IE.
-	NdisZeroMemory(&MeasureRepIE, sizeof(MEASURE_REPORT_INFO));
-	MeasureRepIE.Token = MeasureToken;
-	MeasureRepIE.ReportMode.word = MeasureReqMode;
-	MeasureRepIE.ReportType = MeasureReqType;
-	InsertMeasureReportIE(pAd, (pOutBuffer + FrameLen), &FrameLen, &MeasureRepIE, ReportInfoLen, pReportInfo);
-
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		Prepare TPC Request action frame and enqueue it into
-		management queue waiting for transmition.
-
-	Parametrs:
-		1. the destination mac address of the frame.
-
-	Return	: None.
-	==========================================================================
- */
-VOID EnqueueTPCReq(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pDA,
-	IN UCHAR DialogToken)
-{
-	PUCHAR pOutBuffer = NULL;
-	NDIS_STATUS NStatus;
-	ULONG FrameLen;
-
-	HEADER_802_11 ActHdr;
-
-	// build action frame header.
-	MgtMacHeaderInit(pAd, &ActHdr, SUBTYPE_ACTION, 0, pDA,
-						pAd->CurrentAddress);
-
-	NStatus = MlmeAllocateMemory(pAd, (PVOID)&pOutBuffer);  //Get an unused nonpaged memory
-	if(NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("%s() allocate memory failed \n", __func__));
-		return;
-	}
-	NdisMoveMemory(pOutBuffer, (PCHAR)&ActHdr, sizeof(HEADER_802_11));
-	FrameLen = sizeof(HEADER_802_11);
-
-	InsertActField(pAd, (pOutBuffer + FrameLen), &FrameLen, CATEGORY_SPECTRUM, SPEC_TPCRQ);
-
-	// fill Dialog Token
-	InsertDialogToken(pAd, (pOutBuffer + FrameLen), &FrameLen, DialogToken);
-
-	// Insert TPC Request IE.
-	InsertTpcReqIE(pAd, (pOutBuffer + FrameLen), &FrameLen);
-
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		Prepare TPC Report action frame and enqueue it into
-		management queue waiting for transmition.
-
-	Parametrs:
-		1. the destination mac address of the frame.
-
-	Return	: None.
-	==========================================================================
- */
-VOID EnqueueTPCRep(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pDA,
-	IN UINT8 DialogToken,
-	IN UINT8 TxPwr,
-	IN UINT8 LinkMargin)
-{
-	PUCHAR pOutBuffer = NULL;
-	NDIS_STATUS NStatus;
-	ULONG FrameLen;
-
-	HEADER_802_11 ActHdr;
-
-	// build action frame header.
-	MgtMacHeaderInit(pAd, &ActHdr, SUBTYPE_ACTION, 0, pDA,
-						pAd->CurrentAddress);
-
-	NStatus = MlmeAllocateMemory(pAd, (PVOID)&pOutBuffer);  //Get an unused nonpaged memory
-	if(NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("%s() allocate memory failed \n", __func__));
-		return;
-	}
-	NdisMoveMemory(pOutBuffer, (PCHAR)&ActHdr, sizeof(HEADER_802_11));
-	FrameLen = sizeof(HEADER_802_11);
-
-	InsertActField(pAd, (pOutBuffer + FrameLen), &FrameLen, CATEGORY_SPECTRUM, SPEC_TPCRP);
-
-	// fill Dialog Token
-	InsertDialogToken(pAd, (pOutBuffer + FrameLen), &FrameLen, DialogToken);
-
-	// Insert TPC Request IE.
-	InsertTpcReportIE(pAd, (pOutBuffer + FrameLen), &FrameLen, TxPwr, LinkMargin);
-
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		Prepare Channel Switch Announcement action frame and enqueue it into
-		management queue waiting for transmition.
-
-	Parametrs:
-		1. the destination mac address of the frame.
-		2. Channel switch announcement mode.
-		2. a New selected channel.
-
-	Return	: None.
-	==========================================================================
- */
-VOID EnqueueChSwAnn(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pDA,
-	IN UINT8 ChSwMode,
-	IN UINT8 NewCh)
-{
-	PUCHAR pOutBuffer = NULL;
-	NDIS_STATUS NStatus;
-	ULONG FrameLen;
-
-	HEADER_802_11 ActHdr;
-
-	// build action frame header.
-	MgtMacHeaderInit(pAd, &ActHdr, SUBTYPE_ACTION, 0, pDA,
-						pAd->CurrentAddress);
-
-	NStatus = MlmeAllocateMemory(pAd, (PVOID)&pOutBuffer);  //Get an unused nonpaged memory
-	if(NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("%s() allocate memory failed \n", __func__));
-		return;
-	}
-	NdisMoveMemory(pOutBuffer, (PCHAR)&ActHdr, sizeof(HEADER_802_11));
-	FrameLen = sizeof(HEADER_802_11);
-
-	InsertActField(pAd, (pOutBuffer + FrameLen), &FrameLen, CATEGORY_SPECTRUM, SPEC_CHANNEL_SWITCH);
-
-	InsertChSwAnnIE(pAd, (pOutBuffer + FrameLen), &FrameLen, ChSwMode, NewCh, 0);
-
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-	return;
-}
-
-static BOOLEAN DfsRequirementCheck(
-	IN PRTMP_ADAPTER pAd,
-	IN UINT8 Channel)
-{
-	BOOLEAN Result = FALSE;
-	INT i;
-
-	do
-	{
-		// check DFS procedure is running.
-		// make sure DFS procedure won't start twice.
-		if (pAd->CommonCfg.RadarDetect.RDMode != RD_NORMAL_MODE)
-		{
-			Result = FALSE;
-			break;
-		}
-
-		// check the new channel carried from Channel Switch Announcemnet is valid.
-		for (i=0; i<pAd->ChannelListNum; i++)
-		{
-			if ((Channel == pAd->ChannelList[i].Channel)
-				&&(pAd->ChannelList[i].RemainingTimeForUse == 0))
-			{
-				// found radar signal in the channel. the channel can't use at least for 30 minutes.
-				pAd->ChannelList[i].RemainingTimeForUse = 1800;//30 min = 1800 sec
-				Result = TRUE;
-				break;
-			}
-		}
-	} while(FALSE);
-
-	return Result;
-}
-
-VOID NotifyChSwAnnToPeerAPs(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pRA,
-	IN PUCHAR pTA,
-	IN UINT8 ChSwMode,
-	IN UINT8 Channel)
-{
-#ifdef WDS_SUPPORT
-	if (!((pRA[0] & 0xff) == 0xff)) // is pRA a broadcase address.
-	{
-		INT i;
-		// info neighbor APs that Radar signal found throgh WDS link.
-		for (i = 0; i < MAX_WDS_ENTRY; i++)
-		{
-			if (ValidWdsEntry(pAd, i))
-			{
-				PUCHAR pDA = pAd->WdsTab.WdsEntry[i].PeerWdsAddr;
-
-				// DA equal to SA. have no necessary orignal AP which found Radar signal.
-				if (MAC_ADDR_EQUAL(pTA, pDA))
-					continue;
-
-				// send Channel Switch Action frame to info Neighbro APs.
-				EnqueueChSwAnn(pAd, pDA, ChSwMode, Channel);
-			}
-		}
-	}
-#endif // WDS_SUPPORT //
-}
-
-static VOID StartDFSProcedure(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR Channel,
-	IN UINT8 ChSwMode)
-{
-	// start DFS procedure
-	pAd->CommonCfg.Channel = Channel;
-#ifdef DOT11_N_SUPPORT
-	N_ChannelCheck(pAd);
-#endif // DOT11_N_SUPPORT //
-	pAd->CommonCfg.RadarDetect.RDMode = RD_SWITCHING_MODE;
-	pAd->CommonCfg.RadarDetect.CSCount = 0;
-}
-
-/*
-	==========================================================================
-	Description:
-		Channel Switch Announcement action frame sanity check.
-
-	Parametrs:
-		1. MLME message containing the received frame
-		2. message length.
-		3. Channel switch announcement infomation buffer.
-
-
-	Return	: None.
-	==========================================================================
- */
-
-/*
-  Channel Switch Announcement IE.
-  +----+-----+-----------+------------+-----------+
-  | ID | Len |Ch Sw Mode | New Ch Num | Ch Sw Cnt |
-  +----+-----+-----------+------------+-----------+
-    1    1        1           1            1
-*/
-static BOOLEAN PeerChSwAnnSanity(
-	IN PRTMP_ADAPTER pAd,
-	IN VOID *pMsg,
-	IN ULONG MsgLen,
-	OUT PCH_SW_ANN_INFO pChSwAnnInfo)
-{
-	PFRAME_802_11 Fr = (PFRAME_802_11)pMsg;
-	PUCHAR pFramePtr = Fr->Octet;
-	BOOLEAN result = FALSE;
-	PEID_STRUCT eid_ptr;
-
-	// skip 802.11 header.
-	MsgLen -= sizeof(HEADER_802_11);
-
-	// skip category and action code.
-	pFramePtr += 2;
-	MsgLen -= 2;
-
-	if (pChSwAnnInfo == NULL)
-		return result;
-
-	eid_ptr = (PEID_STRUCT)pFramePtr;
-	while (((UCHAR*)eid_ptr + eid_ptr->Len + 1) < ((PUCHAR)pFramePtr + MsgLen))
-	{
-		switch(eid_ptr->Eid)
-		{
-			case IE_CHANNEL_SWITCH_ANNOUNCEMENT:
-				NdisMoveMemory(&pChSwAnnInfo->ChSwMode, eid_ptr->Octet, 1);
-				NdisMoveMemory(&pChSwAnnInfo->Channel, eid_ptr->Octet + 1, 1);
-				NdisMoveMemory(&pChSwAnnInfo->ChSwCnt, eid_ptr->Octet + 2, 1);
-
-				result = TRUE;
-                break;
-
-			default:
-				break;
-		}
-		eid_ptr = (PEID_STRUCT)((UCHAR*)eid_ptr + 2 + eid_ptr->Len);
-	}
-
-	return result;
-}
-
-/*
-	==========================================================================
-	Description:
-		Measurement request action frame sanity check.
-
-	Parametrs:
-		1. MLME message containing the received frame
-		2. message length.
-		3. Measurement request infomation buffer.
-
-	Return	: None.
-	==========================================================================
- */
-static BOOLEAN PeerMeasureReqSanity(
-	IN PRTMP_ADAPTER pAd,
-	IN VOID *pMsg,
-	IN ULONG MsgLen,
-	OUT PUINT8 pDialogToken,
-	OUT PMEASURE_REQ_INFO pMeasureReqInfo)
-{
-	PFRAME_802_11 Fr = (PFRAME_802_11)pMsg;
-	PUCHAR pFramePtr = Fr->Octet;
-	BOOLEAN result = FALSE;
-	PEID_STRUCT eid_ptr;
-	PUCHAR ptr;
-	UINT64 MeasureStartTime;
-	UINT16 MeasureDuration;
-
-	// skip 802.11 header.
-	MsgLen -= sizeof(HEADER_802_11);
-
-	// skip category and action code.
-	pFramePtr += 2;
-	MsgLen -= 2;
-
-	if (pMeasureReqInfo == NULL)
-		return result;
-
-	NdisMoveMemory(pDialogToken, pFramePtr, 1);
-	pFramePtr += 1;
-	MsgLen -= 1;
-
-	eid_ptr = (PEID_STRUCT)pFramePtr;
-	while (((UCHAR*)eid_ptr + eid_ptr->Len + 1) < ((PUCHAR)pFramePtr + MsgLen))
-	{
-		switch(eid_ptr->Eid)
-		{
-			case IE_MEASUREMENT_REQUEST:
-				NdisMoveMemory(&pMeasureReqInfo->Token, eid_ptr->Octet, 1);
-				NdisMoveMemory(&pMeasureReqInfo->ReqMode.word, eid_ptr->Octet + 1, 1);
-				NdisMoveMemory(&pMeasureReqInfo->ReqType, eid_ptr->Octet + 2, 1);
-				ptr = eid_ptr->Octet + 3;
-				NdisMoveMemory(&pMeasureReqInfo->MeasureReq.ChNum, ptr, 1);
-				NdisMoveMemory(&MeasureStartTime, ptr + 1, 8);
-				pMeasureReqInfo->MeasureReq.MeasureStartTime = SWAP64(MeasureStartTime);
-				NdisMoveMemory(&MeasureDuration, ptr + 9, 2);
-				pMeasureReqInfo->MeasureReq.MeasureDuration = SWAP16(MeasureDuration);
-
-				result = TRUE;
-				break;
-
-			default:
-				break;
-		}
-		eid_ptr = (PEID_STRUCT)((UCHAR*)eid_ptr + 2 + eid_ptr->Len);
-	}
-
-	return result;
-}
-
-/*
-	==========================================================================
-	Description:
-		Measurement report action frame sanity check.
-
-	Parametrs:
-		1. MLME message containing the received frame
-		2. message length.
-		3. Measurement report infomation buffer.
-		4. basic report infomation buffer.
-
-	Return	: None.
-	==========================================================================
- */
-
-/*
-  Measurement Report IE.
-  +----+-----+-------+-------------+--------------+----------------+
-  | ID | Len | Token | Report Mode | Measure Type | Measure Report |
-  +----+-----+-------+-------------+--------------+----------------+
-    1     1      1          1             1            variable
-
-  Basic Report.
-  +--------+------------+----------+-----+
-  | Ch Num | Start Time | Duration | Map |
-  +--------+------------+----------+-----+
-      1          8           2        1
-
-  Map Field Bit Format.
-  +-----+---------------+---------------------+-------+------------+----------+
-  | Bss | OFDM Preamble | Unidentified signal | Radar | Unmeasured | Reserved |
-  +-----+---------------+---------------------+-------+------------+----------+
-     0          1                  2              3         4          5-7
-*/
-static BOOLEAN PeerMeasureReportSanity(
-	IN PRTMP_ADAPTER pAd,
-	IN VOID *pMsg,
-	IN ULONG MsgLen,
-	OUT PUINT8 pDialogToken,
-	OUT PMEASURE_REPORT_INFO pMeasureReportInfo,
-	OUT PUINT8 pReportBuf)
-{
-	PFRAME_802_11 Fr = (PFRAME_802_11)pMsg;
-	PUCHAR pFramePtr = Fr->Octet;
-	BOOLEAN result = FALSE;
-	PEID_STRUCT eid_ptr;
-	PUCHAR ptr;
-
-	// skip 802.11 header.
-	MsgLen -= sizeof(HEADER_802_11);
-
-	// skip category and action code.
-	pFramePtr += 2;
-	MsgLen -= 2;
-
-	if (pMeasureReportInfo == NULL)
-		return result;
-
-	NdisMoveMemory(pDialogToken, pFramePtr, 1);
-	pFramePtr += 1;
-	MsgLen -= 1;
-
-	eid_ptr = (PEID_STRUCT)pFramePtr;
-	while (((UCHAR*)eid_ptr + eid_ptr->Len + 1) < ((PUCHAR)pFramePtr + MsgLen))
-	{
-		switch(eid_ptr->Eid)
-		{
-			case IE_MEASUREMENT_REPORT:
-				NdisMoveMemory(&pMeasureReportInfo->Token, eid_ptr->Octet, 1);
-				NdisMoveMemory(&pMeasureReportInfo->ReportMode, eid_ptr->Octet + 1, 1);
-				NdisMoveMemory(&pMeasureReportInfo->ReportType, eid_ptr->Octet + 2, 1);
-				if (pMeasureReportInfo->ReportType == RM_BASIC)
-				{
-					PMEASURE_BASIC_REPORT pReport = (PMEASURE_BASIC_REPORT)pReportBuf;
-					ptr = eid_ptr->Octet + 3;
-					NdisMoveMemory(&pReport->ChNum, ptr, 1);
-					NdisMoveMemory(&pReport->MeasureStartTime, ptr + 1, 8);
-					NdisMoveMemory(&pReport->MeasureDuration, ptr + 9, 2);
-					NdisMoveMemory(&pReport->Map, ptr + 11, 1);
-
-				}
-				else if (pMeasureReportInfo->ReportType == RM_CCA)
-				{
-					PMEASURE_CCA_REPORT pReport = (PMEASURE_CCA_REPORT)pReportBuf;
-					ptr = eid_ptr->Octet + 3;
-					NdisMoveMemory(&pReport->ChNum, ptr, 1);
-					NdisMoveMemory(&pReport->MeasureStartTime, ptr + 1, 8);
-					NdisMoveMemory(&pReport->MeasureDuration, ptr + 9, 2);
-					NdisMoveMemory(&pReport->CCA_Busy_Fraction, ptr + 11, 1);
-
-				}
-				else if (pMeasureReportInfo->ReportType == RM_RPI_HISTOGRAM)
-				{
-					PMEASURE_RPI_REPORT pReport = (PMEASURE_RPI_REPORT)pReportBuf;
-					ptr = eid_ptr->Octet + 3;
-					NdisMoveMemory(&pReport->ChNum, ptr, 1);
-					NdisMoveMemory(&pReport->MeasureStartTime, ptr + 1, 8);
-					NdisMoveMemory(&pReport->MeasureDuration, ptr + 9, 2);
-					NdisMoveMemory(&pReport->RPI_Density, ptr + 11, 8);
-				}
-				result = TRUE;
-                break;
-
-			default:
-				break;
-		}
-		eid_ptr = (PEID_STRUCT)((UCHAR*)eid_ptr + 2 + eid_ptr->Len);
-	}
-
-	return result;
-}
-
-/*
-	==========================================================================
-	Description:
-		TPC Request action frame sanity check.
-
-	Parametrs:
-		1. MLME message containing the received frame
-		2. message length.
-		3. Dialog Token.
-
-	Return	: None.
-	==========================================================================
- */
-static BOOLEAN PeerTpcReqSanity(
-	IN PRTMP_ADAPTER pAd,
-	IN VOID *pMsg,
-	IN ULONG MsgLen,
-	OUT PUINT8 pDialogToken)
-{
-	PFRAME_802_11 Fr = (PFRAME_802_11)pMsg;
-	PUCHAR pFramePtr = Fr->Octet;
-	BOOLEAN result = FALSE;
-	PEID_STRUCT eid_ptr;
-
-	MsgLen -= sizeof(HEADER_802_11);
-
-	// skip category and action code.
-	pFramePtr += 2;
-	MsgLen -= 2;
-
-	if (pDialogToken == NULL)
-		return result;
-
-	NdisMoveMemory(pDialogToken, pFramePtr, 1);
-	pFramePtr += 1;
-	MsgLen -= 1;
-
-	eid_ptr = (PEID_STRUCT)pFramePtr;
-	while (((UCHAR*)eid_ptr + eid_ptr->Len + 1) < ((PUCHAR)pFramePtr + MsgLen))
-	{
-		switch(eid_ptr->Eid)
-		{
-			case IE_TPC_REQUEST:
-				result = TRUE;
-                break;
-
-			default:
-				break;
-		}
-		eid_ptr = (PEID_STRUCT)((UCHAR*)eid_ptr + 2 + eid_ptr->Len);
-	}
-
-	return result;
-}
-
-/*
-	==========================================================================
-	Description:
-		TPC Report action frame sanity check.
-
-	Parametrs:
-		1. MLME message containing the received frame
-		2. message length.
-		3. Dialog Token.
-		4. TPC Report IE.
-
-	Return	: None.
-	==========================================================================
- */
-static BOOLEAN PeerTpcRepSanity(
-	IN PRTMP_ADAPTER pAd,
-	IN VOID *pMsg,
-	IN ULONG MsgLen,
-	OUT PUINT8 pDialogToken,
-	OUT PTPC_REPORT_INFO pTpcRepInfo)
-{
-	PFRAME_802_11 Fr = (PFRAME_802_11)pMsg;
-	PUCHAR pFramePtr = Fr->Octet;
-	BOOLEAN result = FALSE;
-	PEID_STRUCT eid_ptr;
-
-	MsgLen -= sizeof(HEADER_802_11);
-
-	// skip category and action code.
-	pFramePtr += 2;
-	MsgLen -= 2;
-
-	if (pDialogToken == NULL)
-		return result;
-
-	NdisMoveMemory(pDialogToken, pFramePtr, 1);
-	pFramePtr += 1;
-	MsgLen -= 1;
-
-	eid_ptr = (PEID_STRUCT)pFramePtr;
-	while (((UCHAR*)eid_ptr + eid_ptr->Len + 1) < ((PUCHAR)pFramePtr + MsgLen))
-	{
-		switch(eid_ptr->Eid)
-		{
-			case IE_TPC_REPORT:
-				NdisMoveMemory(&pTpcRepInfo->TxPwr, eid_ptr->Octet, 1);
-				NdisMoveMemory(&pTpcRepInfo->LinkMargin, eid_ptr->Octet + 1, 1);
-				result = TRUE;
-                break;
-
-			default:
-				break;
-		}
-		eid_ptr = (PEID_STRUCT)((UCHAR*)eid_ptr + 2 + eid_ptr->Len);
-	}
-
-	return result;
-}
-
-/*
-	==========================================================================
-	Description:
-		Channel Switch Announcement action frame handler.
-
-	Parametrs:
-		Elme - MLME message containing the received frame
-
-	Return	: None.
-	==========================================================================
- */
-static VOID PeerChSwAnnAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	CH_SW_ANN_INFO ChSwAnnInfo;
-	PFRAME_802_11 pFr = (PFRAME_802_11)Elem->Msg;
-#ifdef CONFIG_STA_SUPPORT
-	UCHAR index = 0, Channel = 0, NewChannel = 0;
-	ULONG Bssidx = 0;
-#endif // CONFIG_STA_SUPPORT //
-
-	NdisZeroMemory(&ChSwAnnInfo, sizeof(CH_SW_ANN_INFO));
-	if (! PeerChSwAnnSanity(pAd, Elem->Msg, Elem->MsgLen, &ChSwAnnInfo))
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("Invalid Channel Switch Action Frame.\n"));
-		return;
-	}
-
-
-#ifdef CONFIG_STA_SUPPORT
-	if (pAd->OpMode == OPMODE_STA)
-	{
-		Bssidx = BssTableSearch(&pAd->ScanTab, pFr->Hdr.Addr3, pAd->CommonCfg.Channel);
-		if (Bssidx == BSS_NOT_FOUND)
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("PeerChSwAnnAction - Bssidx is not found\n"));
-			return;
-		}
-
-		DBGPRINT(RT_DEBUG_TRACE, ("\n****Bssidx is %d, Channel = %d\n", index, pAd->ScanTab.BssEntry[Bssidx].Channel));
-		hex_dump("SSID",pAd->ScanTab.BssEntry[Bssidx].Bssid ,6);
-
-		Channel = pAd->CommonCfg.Channel;
-		NewChannel = ChSwAnnInfo.Channel;
-
-		if ((pAd->CommonCfg.bIEEE80211H == 1) && (NewChannel != 0) && (Channel != NewChannel))
-		{
-			// Switching to channel 1 can prevent from rescanning the current channel immediately (by auto reconnection).
-			// In addition, clear the MLME queue and the scan table to discard the RX packets and previous scanning results.
-			AsicSwitchChannel(pAd, 1, FALSE);
-			AsicLockChannel(pAd, 1);
-		    LinkDown(pAd, FALSE);
-			MlmeQueueInit(&pAd->Mlme.Queue);
-			BssTableInit(&pAd->ScanTab);
-		    RTMPusecDelay(1000000);		// use delay to prevent STA do reassoc
-
-			// channel sanity check
-			for (index = 0 ; index < pAd->ChannelListNum; index++)
-			{
-				if (pAd->ChannelList[index].Channel == NewChannel)
-				{
-					pAd->ScanTab.BssEntry[Bssidx].Channel = NewChannel;
-					pAd->CommonCfg.Channel = NewChannel;
-					AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
-					AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-					DBGPRINT(RT_DEBUG_TRACE, ("&&&&&&&&&&&&&&&&PeerChSwAnnAction - STA receive channel switch announcement IE (New Channel =%d)\n", NewChannel));
-					break;
-				}
-			}
-
-			if (index >= pAd->ChannelListNum)
-			{
-				DBGPRINT_ERR(("&&&&&&&&&&&&&&&&&&&&&&&&&&PeerChSwAnnAction(can not find New Channel=%d in ChannelList[%d]\n", pAd->CommonCfg.Channel, pAd->ChannelListNum));
-			}
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	return;
-}
-
-
-/*
-	==========================================================================
-	Description:
-		Measurement Request action frame handler.
-
-	Parametrs:
-		Elme - MLME message containing the received frame
-
-	Return	: None.
-	==========================================================================
- */
-static VOID PeerMeasureReqAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	PFRAME_802_11 pFr = (PFRAME_802_11)Elem->Msg;
-	UINT8 DialogToken;
-	MEASURE_REQ_INFO MeasureReqInfo;
-	MEASURE_REPORT_MODE ReportMode;
-
-	if(PeerMeasureReqSanity(pAd, Elem->Msg, Elem->MsgLen, &DialogToken, &MeasureReqInfo))
-	{
-		ReportMode.word = 0;
-		ReportMode.field.Incapable = 1;
-		EnqueueMeasurementRep(pAd, pFr->Hdr.Addr2, DialogToken, MeasureReqInfo.Token, ReportMode.word, MeasureReqInfo.ReqType, 0, NULL);
-	}
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		Measurement Report action frame handler.
-
-	Parametrs:
-		Elme - MLME message containing the received frame
-
-	Return	: None.
-	==========================================================================
- */
-static VOID PeerMeasureReportAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	MEASURE_REPORT_INFO MeasureReportInfo;
-	PFRAME_802_11 pFr = (PFRAME_802_11)Elem->Msg;
-	UINT8 DialogToken;
-	PUINT8 pMeasureReportInfo;
-
-//	if (pAd->CommonCfg.bIEEE80211H != TRUE)
-//		return;
-
-	if ((pMeasureReportInfo = kmalloc(sizeof(MEASURE_RPI_REPORT), GFP_ATOMIC)) == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("%s unable to alloc memory for measure report buffer (size=%zu).\n", __func__, sizeof(MEASURE_RPI_REPORT)));
-		return;
-	}
-
-	NdisZeroMemory(&MeasureReportInfo, sizeof(MEASURE_REPORT_INFO));
-	NdisZeroMemory(pMeasureReportInfo, sizeof(MEASURE_RPI_REPORT));
-	if (PeerMeasureReportSanity(pAd, Elem->Msg, Elem->MsgLen, &DialogToken, &MeasureReportInfo, pMeasureReportInfo))
-	{
-		do {
-			PMEASURE_REQ_ENTRY pEntry = NULL;
-
-			// Not a autonomous measure report.
-			// check the dialog token field. drop it if the dialog token doesn't match.
-			if ((DialogToken != 0)
-				&& ((pEntry = MeasureReqLookUp(pAd, DialogToken)) == NULL))
-				break;
-
-			if (pEntry != NULL)
-				MeasureReqDelete(pAd, pEntry->DialogToken);
-
-			if (MeasureReportInfo.ReportType == RM_BASIC)
-			{
-				PMEASURE_BASIC_REPORT pBasicReport = (PMEASURE_BASIC_REPORT)pMeasureReportInfo;
-				if ((pBasicReport->Map.field.Radar)
-					&& (DfsRequirementCheck(pAd, pBasicReport->ChNum) == TRUE))
-				{
-					NotifyChSwAnnToPeerAPs(pAd, pFr->Hdr.Addr1, pFr->Hdr.Addr2, 1, pBasicReport->ChNum);
-					StartDFSProcedure(pAd, pBasicReport->ChNum, 1);
-				}
-			}
-		} while (FALSE);
-	}
-	else
-		DBGPRINT(RT_DEBUG_TRACE, ("Invalid Measurement Report Frame.\n"));
-
-	kfree(pMeasureReportInfo);
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		TPC Request action frame handler.
-
-	Parametrs:
-		Elme - MLME message containing the received frame
-
-	Return	: None.
-	==========================================================================
- */
-static VOID PeerTpcReqAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	PFRAME_802_11 pFr = (PFRAME_802_11)Elem->Msg;
-	PUCHAR pFramePtr = pFr->Octet;
-	UINT8 DialogToken;
-	UINT8 TxPwr = GetCurTxPwr(pAd, Elem->Wcid);
-	UINT8 LinkMargin = 0;
-	CHAR RealRssi;
-
-	// link margin: Ratio of the received signal power to the minimum desired by the station (STA). The
-	//				STA may incorporate rate information and channel conditions, including interference, into its computation
-	//				of link margin.
-
-	RealRssi = RTMPMaxRssi(pAd, ConvertToRssi(pAd, Elem->Rssi0, RSSI_0),
-								ConvertToRssi(pAd, Elem->Rssi1, RSSI_1),
-								ConvertToRssi(pAd, Elem->Rssi2, RSSI_2));
-
-	// skip Category and action code.
-	pFramePtr += 2;
-
-	// Dialog token.
-	NdisMoveMemory(&DialogToken, pFramePtr, 1);
-
-	LinkMargin = (RealRssi / MIN_RCV_PWR);
-	if (PeerTpcReqSanity(pAd, Elem->Msg, Elem->MsgLen, &DialogToken))
-		EnqueueTPCRep(pAd, pFr->Hdr.Addr2, DialogToken, TxPwr, LinkMargin);
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		TPC Report action frame handler.
-
-	Parametrs:
-		Elme - MLME message containing the received frame
-
-	Return	: None.
-	==========================================================================
- */
-static VOID PeerTpcRepAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UINT8 DialogToken;
-	TPC_REPORT_INFO TpcRepInfo;
-	PTPC_REQ_ENTRY pEntry = NULL;
-
-	NdisZeroMemory(&TpcRepInfo, sizeof(TPC_REPORT_INFO));
-	if (PeerTpcRepSanity(pAd, Elem->Msg, Elem->MsgLen, &DialogToken, &TpcRepInfo))
-	{
-		if ((pEntry = TpcReqLookUp(pAd, DialogToken)) != NULL)
-		{
-			TpcReqDelete(pAd, pEntry->DialogToken);
-			DBGPRINT(RT_DEBUG_TRACE, ("%s: DialogToken=%x, TxPwr=%d, LinkMargin=%d\n",
-				__func__, DialogToken, TpcRepInfo.TxPwr, TpcRepInfo.LinkMargin));
-		}
-	}
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		Spectrun action frames Handler such as channel switch annoucement,
-		measurement report, measurement request actions frames.
-
-	Parametrs:
-		Elme - MLME message containing the received frame
-
-	Return	: None.
-	==========================================================================
- */
-VOID PeerSpectrumAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-
-	UCHAR	Action = Elem->Msg[LENGTH_802_11+1];
-
-	if (pAd->CommonCfg.bIEEE80211H != TRUE)
-		return;
-
-	switch(Action)
-	{
-		case SPEC_MRQ:
-			// current rt2860 unable do such measure specified in Measurement Request.
-			// reject all measurement request.
-			PeerMeasureReqAction(pAd, Elem);
-			break;
-
-		case SPEC_MRP:
-			PeerMeasureReportAction(pAd, Elem);
-			break;
-
-		case SPEC_TPCRQ:
-			PeerTpcReqAction(pAd, Elem);
-			break;
-
-		case SPEC_TPCRP:
-			PeerTpcRepAction(pAd, Elem);
-			break;
-
-		case SPEC_CHANNEL_SWITCH:
-{
-#ifdef DOT11N_DRAFT3
-				SEC_CHA_OFFSET_IE	Secondary;
-				CHA_SWITCH_ANNOUNCE_IE	ChannelSwitch;
-
-				// 802.11h only has Channel Switch Announcement IE.
-				RTMPMoveMemory(&ChannelSwitch, &Elem->Msg[LENGTH_802_11+4], sizeof (CHA_SWITCH_ANNOUNCE_IE));
-
-				// 802.11n D3.03 adds secondary channel offset element in the end.
-				if (Elem->MsgLen ==  (LENGTH_802_11 + 2 + sizeof (CHA_SWITCH_ANNOUNCE_IE) + sizeof (SEC_CHA_OFFSET_IE)))
-				{
-					RTMPMoveMemory(&Secondary, &Elem->Msg[LENGTH_802_11+9], sizeof (SEC_CHA_OFFSET_IE));
-				}
-				else
-				{
-					Secondary.SecondaryChannelOffset = 0;
-				}
-
-				if ((Elem->Msg[LENGTH_802_11+2] == IE_CHANNEL_SWITCH_ANNOUNCEMENT) && (Elem->Msg[LENGTH_802_11+3] == 3))
-				{
-					ChannelSwitchAction(pAd, Elem->Wcid, ChannelSwitch.NewChannel, Secondary.SecondaryChannelOffset);
-				}
-#endif // DOT11N_DRAFT3 //
-}
-			PeerChSwAnnAction(pAd, Elem);
-			break;
-	}
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-
-	Parametrs:
-
-	Return	: None.
-	==========================================================================
- */
-INT Set_MeasureReq_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UINT Aid = 1;
-	UINT ArgIdx;
-	PUCHAR thisChar;
-
-	MEASURE_REQ_MODE MeasureReqMode;
-	UINT8 MeasureReqToken = RandomByte(pAd);
-	UINT8 MeasureReqType = RM_BASIC;
-	UINT8 MeasureCh = 1;
-
-	ArgIdx = 1;
-	while ((thisChar = strsep((char **)&arg, "-")) != NULL)
-	{
-		switch(ArgIdx)
-		{
-			case 1:	// Aid.
-				Aid = simple_strtol(thisChar, 0, 16);
-				break;
-
-			case 2: // Measurement Request Type.
-				MeasureReqType = simple_strtol(thisChar, 0, 16);
-				if (MeasureReqType > 3)
-				{
-					DBGPRINT(RT_DEBUG_ERROR, ("%s: unknow MeasureReqType(%d)\n", __func__, MeasureReqType));
-					return TRUE;
-				}
-				break;
-
-			case 3: // Measurement channel.
-				MeasureCh = simple_strtol(thisChar, 0, 16);
-				break;
-		}
-		ArgIdx++;
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("%s::Aid = %d, MeasureReqType=%d MeasureCh=%d\n", __func__, Aid, MeasureReqType, MeasureCh));
-	if (!VALID_WCID(Aid))
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("%s: unknow sta of Aid(%d)\n", __func__, Aid));
-		return TRUE;
-	}
-
-	MeasureReqMode.word = 0;
-	MeasureReqMode.field.Enable = 1;
-
-	MeasureReqInsert(pAd, MeasureReqToken);
-
-	EnqueueMeasurementReq(pAd, pAd->MacTab.Content[Aid].Addr,
-		MeasureReqToken, MeasureReqMode.word, MeasureReqType, MeasureCh, 2000);
-
-	return TRUE;
-}
-
-INT Set_TpcReq_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UINT Aid;
-
-	UINT8 TpcReqToken = RandomByte(pAd);
-
-	Aid = simple_strtol(arg, 0, 16);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("%s::Aid = %d\n", __func__, Aid));
-	if (!VALID_WCID(Aid))
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("%s: unknow sta of Aid(%d)\n", __func__, Aid));
-		return TRUE;
-	}
-
-	TpcReqInsert(pAd, TpcReqToken);
-
-	EnqueueTPCReq(pAd, pAd->MacTab.Content[Aid].Addr, TpcReqToken);
-
-	return TRUE;
-}
-
+#include "../../rt2860/common/spectrum.c"
diff --git a/drivers/staging/rt2870/dfs.h b/drivers/staging/rt2870/dfs.h
index 752a6352d9d..1fdbd7bc5de 100644
--- a/drivers/staging/rt2870/dfs.h
+++ b/drivers/staging/rt2870/dfs.h
@@ -1,100 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-    dfs.h
-
-    Abstract:
-    Support DFS function.
-
-    Revision History:
-    Who       When            What
-    --------  ----------      ----------------------------------------------
-    Fonchi    03-12-2007      created
-*/
-
-#define RADAR_PULSE 1
-#define RADAR_WIDTH 2
-
-#define WIDTH_RD_IDLE 0
-#define WIDTH_RD_CHECK 1
-
-
-VOID BbpRadarDetectionStart(
-	IN PRTMP_ADAPTER pAd);
-
-VOID BbpRadarDetectionStop(
-	IN PRTMP_ADAPTER pAd);
-
-VOID RadarDetectionStart(
-	IN PRTMP_ADAPTER pAd,
-	IN BOOLEAN CTS_Protect,
-	IN UINT8 CTSPeriod);
-
-VOID RadarDetectionStop(
-	IN PRTMP_ADAPTER	pAd);
-
-VOID RadarDetectPeriodic(
-	IN PRTMP_ADAPTER	pAd);
-
-
-BOOLEAN RadarChannelCheck(
-	IN PRTMP_ADAPTER	pAd,
-	IN UCHAR			Ch);
-
-ULONG JapRadarType(
-	IN PRTMP_ADAPTER pAd);
-
-ULONG RTMPBbpReadRadarDuration(
-	IN PRTMP_ADAPTER	pAd);
-
-ULONG RTMPReadRadarDuration(
-	IN PRTMP_ADAPTER	pAd);
-
-VOID RTMPCleanRadarDuration(
-	IN PRTMP_ADAPTER	pAd);
-
-VOID RTMPPrepareRDCTSFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pDA,
-	IN	ULONG			Duration,
-	IN  UCHAR           RTSRate,
-	IN  ULONG           CTSBaseAddr,
-	IN  UCHAR			FrameGap);
-
-VOID RTMPPrepareRadarDetectParams(
-	IN PRTMP_ADAPTER	pAd);
-
-
-INT Set_ChMovingTime_Proc(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR arg);
-
-INT Set_LongPulseRadarTh_Proc(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR arg);
-
-
+#include "../rt2860/dfs.h"
diff --git a/drivers/staging/rt2870/leap.h b/drivers/staging/rt2870/leap.h
deleted file mode 100644
index 6818c1ff4d7..00000000000
--- a/drivers/staging/rt2870/leap.h
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	leap.h
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Name		Date			Modification logs
-*/
-#ifndef __LEAP_H__
-#define __LEAP_H__
-
-// Messages for Associate state machine
-#define LEAP_MACHINE_BASE                   30
-
-#define LEAP_MSG_REQUEST_IDENTITY           31
-#define LEAP_MSG_REQUEST_LEAP               32
-#define LEAP_MSG_SUCCESS                    33
-#define LEAP_MSG_FAILED                     34
-#define LEAP_MSG_RESPONSE_LEAP              35
-#define LEAP_MSG_EAPOLKEY                   36
-#define LEAP_MSG_UNKNOWN                    37
-#define LEAP_MSG                            38
-//! assoc state-machine states
-#define LEAP_IDLE                           0
-#define LEAP_WAIT_IDENTITY_REQUEST          1
-#define LEAP_WAIT_CHANLLENGE_REQUEST        2
-#define LEAP_WAIT_SUCCESS                   3
-#define LEAP_WAIT_CHANLLENGE_RESPONSE       4
-#define LEAP_WAIT_EAPOLKEY                  5
-
-#define LEAP_REASON_INVALID_AUTH                    0x01
-#define LEAP_REASON_AUTH_TIMEOUT                    0x02
-#define LEAP_REASON_CHALLENGE_FROM_AP_FAILED        0x03
-#define LEAP_REASON_CHALLENGE_TO_AP_FAILED          0x04
-
-#define CISCO_AuthModeLEAP                          0x80
-#define CISCO_AuthModeLEAPNone                      0x00
-#define LEAP_AUTH_TIMEOUT                           30000
-#define LEAP_CHALLENGE_RESPONSE_LENGTH              24
-#define LEAP_CHALLENGE_REQUEST_LENGTH               8
-
-typedef struct _LEAP_EAPOL_HEADER_ {
-    UCHAR       Version;
-    UCHAR       Type;
-    UCHAR       Length[2];
-} LEAP_EAPOL_HEADER, *PLEAP_EAPOL_HEADER;
-
-typedef struct _LEAP_EAPOL_PACKET_ {
-    UCHAR       Code;
-    UCHAR       Identifier;
-    UCHAR       Length[2];
-    UCHAR       Type;
-} LEAP_EAPOL_PACKET, *PLEAP_EAPOL_PACKET;
-
-typedef struct _LEAP_EAP_CONTENTS_ {
-    UCHAR       Version;
-    UCHAR       Reserved;
-    UCHAR       Length;
-} LEAP_EAP_CONTENTS, *PLEAP_EAP_CONTENTS;
-
-/*** EAPOL key ***/
-typedef struct _EAPOL_KEY_HEADER_ {
-    UCHAR       Type;
-    UCHAR       Length[2];
-    UCHAR       Counter[8];
-    UCHAR       IV[16];
-    UCHAR       Index;
-    UCHAR       Signature[16];
-} EAPOL_KEY_HEADER, *PEAPOL_KEY_HEADER;
-
-BOOLEAN LeapMsgTypeSubst(
-    IN  UCHAR   EAPType,
-    OUT ULONG   *MsgType);
-
-VOID LeapMachinePerformAction(
-    IN PRTMP_ADAPTER    pAd,
-    IN STATE_MACHINE    *S,
-    IN MLME_QUEUE_ELEM  *Elem);
-
-VOID LeapMacHeaderInit(
-    IN  PRTMP_ADAPTER       pAd,
-    IN  OUT PHEADER_802_11  pHdr80211,
-    IN  UCHAR               wep,
-    IN  PUCHAR              pAddr3);
-
-VOID LeapStartAction(
-    IN PRTMP_ADAPTER    pAd,
-    IN MLME_QUEUE_ELEM  *Elem);
-
-VOID LeapIdentityAction(
-    IN PRTMP_ADAPTER    pAd,
-    IN MLME_QUEUE_ELEM  *Elem);
-
-VOID LeapPeerChallengeAction(
-    IN PRTMP_ADAPTER    pAd,
-    IN MLME_QUEUE_ELEM  *Elem);
-
-VOID HashPwd(
-    IN  PUCHAR  pwd,
-    IN  INT     pwdlen,
-    OUT PUCHAR  hash);
-
-VOID PeerChallengeResponse(
-    IN  PUCHAR  szChallenge,
-    IN  PUCHAR  smbPasswd,
-    OUT PUCHAR  szResponse);
-
-VOID ParityKey(
-    OUT PUCHAR  szOut,
-    IN  PUCHAR  szIn);
-
-VOID DesKey(
-    OUT ULONG   k[16][2],
-    IN  PUCHAR  key,
-    IN  INT     decrypt);
-
-VOID Des(
-    IN  ULONG   ks[16][2],
-    OUT UCHAR   block[8]);
-
-VOID DesEncrypt(
-    IN  PUCHAR  szClear,
-    IN  PUCHAR  szKey,
-    OUT PUCHAR  szOut);
-
-VOID LeapNetworkChallengeAction(
-    IN PRTMP_ADAPTER    pAd,
-    IN MLME_QUEUE_ELEM  *Elem);
-
-VOID LeapNetworkChallengeResponse(
-    IN PRTMP_ADAPTER    pAd,
-    IN MLME_QUEUE_ELEM  *Elem);
-
-VOID HashpwdHash(
-    IN  PUCHAR  hash,
-    IN  PUCHAR  hashhash);
-
-VOID ProcessSessionKey(
-    OUT PUCHAR  SessionKey,
-    IN  PUCHAR  hash2,
-    IN  PUCHAR  ChallengeToRadius,
-    IN  PUCHAR  ChallengeResponseFromRadius,
-    IN  PUCHAR  ChallengeFromRadius,
-    IN  PUCHAR  ChallengeResponseToRadius);
-
-VOID LeapEapolKeyAction(
-    IN PRTMP_ADAPTER    pAd,
-    IN MLME_QUEUE_ELEM  *Elem);
-
-VOID RogueApTableInit(
-    IN ROGUEAP_TABLE    *Tab);
-
-ULONG RogueApTableSearch(
-    IN ROGUEAP_TABLE    *Tab,
-    IN PUCHAR           pAddr);
-
-VOID RogueApEntrySet(
-    IN  PRTMP_ADAPTER   pAd,
-    OUT ROGUEAP_ENTRY   *pRogueAp,
-    IN PUCHAR           pAddr,
-    IN UCHAR            FaileCode);
-
-ULONG RogueApTableSetEntry(
-    IN  PRTMP_ADAPTER   pAd,
-    OUT ROGUEAP_TABLE  *Tab,
-    IN PUCHAR           pAddr,
-    IN UCHAR            FaileCode);
-
-VOID RogueApTableDeleteEntry(
-    IN OUT ROGUEAP_TABLE *Tab,
-    IN PUCHAR          pAddr);
-
-VOID LeapAuthTimeout(
-    IN PVOID SystemSpecific1,
-    IN PVOID FunctionContext,
-    IN PVOID SystemSpecific2,
-    IN PVOID SystemSpecific3);
-
-VOID LeapSendRogueAPReport(
-    IN  PRTMP_ADAPTER   pAd);
-
-BOOLEAN CCKMAssocRspSanity(
-    IN PRTMP_ADAPTER    pAd,
-    IN VOID             *Msg,
-    IN ULONG            MsgLen);
-
-#endif  // __LEAP_H__
diff --git a/drivers/staging/rt2870/link_list.h b/drivers/staging/rt2870/link_list.h
index f6521133fd5..2589f347039 100644
--- a/drivers/staging/rt2870/link_list.h
+++ b/drivers/staging/rt2870/link_list.h
@@ -1,134 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-#ifndef __LINK_LIST_H__
-#define __LINK_LIST_H__
-
-typedef struct _LIST_ENTRY
-{
-	struct _LIST_ENTRY *pNext;
-} LIST_ENTRY, *PLIST_ENTRY;
-
-typedef struct _LIST_HEADR
-{
-	PLIST_ENTRY pHead;
-	PLIST_ENTRY pTail;
-	UCHAR size;
-} LIST_HEADER, *PLIST_HEADER;
-
-static inline VOID initList(
-	IN PLIST_HEADER pList)
-{
-	pList->pHead = pList->pTail = NULL;
-	pList->size = 0;
-	return;
-}
-
-static inline VOID insertTailList(
-	IN PLIST_HEADER pList,
-	IN PLIST_ENTRY pEntry)
-{
-	pEntry->pNext = NULL;
-	if (pList->pTail)
-		pList->pTail->pNext = pEntry;
-	else
-		pList->pHead = pEntry;
-	pList->pTail = pEntry;
-	pList->size++;
-
-	return;
-}
-
-static inline PLIST_ENTRY removeHeadList(
-	IN PLIST_HEADER pList)
-{
-	PLIST_ENTRY pNext;
-	PLIST_ENTRY pEntry;
-
-	pEntry = pList->pHead;
-	if (pList->pHead != NULL)
-	{
-		pNext = pList->pHead->pNext;
-		pList->pHead = pNext;
-		if (pNext == NULL)
-			pList->pTail = NULL;
-		pList->size--;
-	}
-	return pEntry;
-}
-
-static inline int getListSize(
-	IN PLIST_HEADER pList)
-{
-	return pList->size;
-}
-
-static inline PLIST_ENTRY delEntryList(
-	IN PLIST_HEADER pList,
-	IN PLIST_ENTRY pEntry)
-{
-	PLIST_ENTRY pCurEntry;
-	PLIST_ENTRY pPrvEntry;
-
-	if(pList->pHead == NULL)
-		return NULL;
-
-	if(pEntry == pList->pHead)
-	{
-		pCurEntry = pList->pHead;
-		pList->pHead = pCurEntry->pNext;
-
-		if(pList->pHead == NULL)
-			pList->pTail = NULL;
-
-		pList->size--;
-		return pCurEntry;
-	}
-
-	pPrvEntry = pList->pHead;
-	pCurEntry = pPrvEntry->pNext;
-	while(pCurEntry != NULL)
-	{
-		if (pEntry == pCurEntry)
-		{
-			pPrvEntry->pNext = pCurEntry->pNext;
-
-			if(pEntry == pList->pTail)
-				pList->pTail = pPrvEntry;
-
-			pList->size--;
-			break;
-		}
-		pPrvEntry = pCurEntry;
-		pCurEntry = pPrvEntry->pNext;
-	}
-
-	return pCurEntry;
-}
-
-#endif // ___LINK_LIST_H__ //
-
+#include "../rt2860/link_list.h"
diff --git a/drivers/staging/rt2870/md5.h b/drivers/staging/rt2870/md5.h
index d85db12170d..d60cd05b54f 100644
--- a/drivers/staging/rt2870/md5.h
+++ b/drivers/staging/rt2870/md5.h
@@ -1,107 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	md5.h
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Name		Date			Modification logs
-	jan			10-28-03		Initial
-	Rita    	11-23-04		Modify MD5 and SHA-1
-*/
-
-#ifndef	uint8
-#define	uint8  unsigned	char
-#endif
-
-#ifndef	uint32
-#define	uint32 unsigned	long int
-#endif
-
-
-#ifndef	__MD5_H__
-#define	__MD5_H__
-
-#define MD5_MAC_LEN 16
-
-typedef struct _MD5_CTX {
-    UINT32   Buf[4];             // buffers of four states
-	UCHAR   Input[64];          // input message
-	UINT32   LenInBitCount[2];   // length counter for input message, 0 up to 64 bits
-}   MD5_CTX;
-
-VOID MD5Init(MD5_CTX *pCtx);
-VOID MD5Update(MD5_CTX *pCtx, UCHAR *pData, UINT32 LenInBytes);
-VOID MD5Final(UCHAR Digest[16], MD5_CTX *pCtx);
-VOID MD5Transform(UINT32 Buf[4], UINT32 Mes[16]);
-
-void md5_mac(u8 *key, size_t key_len, u8 *data, size_t data_len, u8 *mac);
-void hmac_md5(u8 *key, size_t key_len, u8 *data, size_t data_len, u8 *mac);
-
-//
-// SHA context
-//
-typedef	struct _SHA_CTX
-{
-	UINT32   Buf[5];             // buffers of five states
-	UCHAR   Input[80];          // input message
-	UINT32   LenInBitCount[2];   // length counter for input message, 0 up to 64 bits
-
-}	SHA_CTX;
-
-VOID SHAInit(SHA_CTX *pCtx);
-UCHAR SHAUpdate(SHA_CTX *pCtx, UCHAR *pData, UINT32 LenInBytes);
-VOID SHAFinal(SHA_CTX *pCtx, UCHAR Digest[20]);
-VOID SHATransform(UINT32 Buf[5], UINT32 Mes[20]);
-
-#define SHA_DIGEST_LEN 20
-#endif // __MD5_H__
-
-/******************************************************************************/
-#ifndef	_AES_H
-#define	_AES_H
-
-typedef	struct
-{
-	uint32 erk[64];		/* encryption round	keys */
-	uint32 drk[64];		/* decryption round	keys */
-	int	nr;				/* number of rounds	*/
-}
-aes_context;
-
-int	 rtmp_aes_set_key( aes_context *ctx,	uint8 *key,	int	nbits );
-void rtmp_aes_encrypt( aes_context *ctx,	uint8 input[16], uint8 output[16] );
-void rtmp_aes_decrypt( aes_context *ctx,	uint8 input[16], uint8 output[16] );
-
-void F(char *password, unsigned char *ssid, int ssidlength, int iterations, int count, unsigned char *output);
-int PasswordHash(char *password, unsigned char *ssid, int ssidlength, unsigned char *output);
-
-#endif /* aes.h	*/
-
+#include "../rt2860/md5.h"
diff --git a/drivers/staging/rt2870/mlme.h b/drivers/staging/rt2870/mlme.h
index 52fb8e1c290..58753ac441d 100644
--- a/drivers/staging/rt2870/mlme.h
+++ b/drivers/staging/rt2870/mlme.h
@@ -1,1471 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	mlme.h
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	John Chang	2003-08-28		Created
-	John Chang  2004-09-06      modified for RT2600
-
-*/
-#ifndef __MLME_H__
-#define __MLME_H__
-
-//extern UCHAR BROADCAST_ADDR[];
-
-// maximum supported capability information -
-// ESS, IBSS, Privacy, Short Preamble, Spectrum mgmt, Short Slot
-#define SUPPORTED_CAPABILITY_INFO   0x0533
-
-#define END_OF_ARGS                 -1
-#define LFSR_MASK                   0x80000057
-#define MLME_TASK_EXEC_INTV         100/*200*/       //
-#define LEAD_TIME                   5
-#define MLME_TASK_EXEC_MULTIPLE       10  /*5*/       // MLME_TASK_EXEC_MULTIPLE * MLME_TASK_EXEC_INTV = 1 sec
-#define REORDER_EXEC_INTV         	100       // 0.1 sec
-//#define TBTT_PRELOAD_TIME         384        // usec. LomgPreamble + 24-byte at 1Mbps
-
-// The definition of Radar detection duration region
-#define CE		0
-#define FCC		1
-#define JAP		2
-#define JAP_W53	3
-#define JAP_W56	4
-#define MAX_RD_REGION 5
-
-#ifdef	NDIS51_MINIPORT
-#define BEACON_LOST_TIME            4000       // 2048 msec = 2 sec
-#else
-#define BEACON_LOST_TIME            4 * OS_HZ    // 2048 msec = 2 sec
-#endif
-
-#define DLS_TIMEOUT                 1200      // unit: msec
-#define AUTH_TIMEOUT                300       // unit: msec
-#define ASSOC_TIMEOUT               300       // unit: msec
-#define JOIN_TIMEOUT                2 * OS_HZ      // unit: msec
-#define SHORT_CHANNEL_TIME          90        // unit: msec
-#define MIN_CHANNEL_TIME            110        // unit: msec, for dual band scan
-#define MAX_CHANNEL_TIME            140       // unit: msec, for single band scan
-#define	FAST_ACTIVE_SCAN_TIME	    30 		  // Active scan waiting for probe response time
-#define CW_MIN_IN_BITS              4         // actual CwMin = 2^CW_MIN_IN_BITS - 1
-
-
-#ifdef CONFIG_STA_SUPPORT
-#ifndef CONFIG_AP_SUPPORT
-#define CW_MAX_IN_BITS              10        // actual CwMax = 2^CW_MAX_IN_BITS - 1
-#endif
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef CONFIG_APSTA_MIXED_SUPPORT
-extern UINT32 CW_MAX_IN_BITS;
-#endif // CONFIG_APSTA_MIXED_SUPPORT //
-
-// Note: RSSI_TO_DBM_OFFSET has been changed to variable for new RF (2004-0720).
-// SHould not refer to this constant anymore
-//#define RSSI_TO_DBM_OFFSET          120 // for RT2530 RSSI-115 = dBm
-#define RSSI_FOR_MID_TX_POWER       -55  // -55 db is considered mid-distance
-#define RSSI_FOR_LOW_TX_POWER       -45  // -45 db is considered very short distance and
-                                        // eligible to use a lower TX power
-#define RSSI_FOR_LOWEST_TX_POWER    -30
-//#define MID_TX_POWER_DELTA          0   // 0 db from full TX power upon mid-distance to AP
-#define LOW_TX_POWER_DELTA          6    // -3 db from full TX power upon very short distance. 1 grade is 0.5 db
-#define LOWEST_TX_POWER_DELTA       16   // -8 db from full TX power upon shortest distance. 1 grade is 0.5 db
-
-#define RSSI_TRIGGERED_UPON_BELOW_THRESHOLD     0
-#define RSSI_TRIGGERED_UPON_EXCCEED_THRESHOLD   1
-#define RSSI_THRESHOLD_FOR_ROAMING              25
-#define RSSI_DELTA                              5
-
-// Channel Quality Indication
-#define CQI_IS_GOOD(cqi)            ((cqi) >= 50)
-//#define CQI_IS_FAIR(cqi)          (((cqi) >= 20) && ((cqi) < 50))
-#define CQI_IS_POOR(cqi)            (cqi < 50)  //(((cqi) >= 5) && ((cqi) < 20))
-#define CQI_IS_BAD(cqi)             (cqi < 5)
-#define CQI_IS_DEAD(cqi)            (cqi == 0)
-
-// weighting factor to calculate Channel quality, total should be 100%
-#define RSSI_WEIGHTING                   50
-#define TX_WEIGHTING                     30
-#define RX_WEIGHTING                     20
-
-//#define PEER_KEY_NOT_USED                0
-//#define PEER_KEY_64_BIT                  64
-//#define PEER_KEY_128_BIT                 128
-
-//#define PEER_KEY_64BIT_LEN               8
-//#define PEER_KEY_128BIT_LEN              16
-
-#define BSS_NOT_FOUND                    0xFFFFFFFF
-
-
-#ifdef CONFIG_STA_SUPPORT
-#define MAX_LEN_OF_MLME_QUEUE            40 //10
-#endif // CONFIG_STA_SUPPORT //
-
-#define SCAN_PASSIVE                     18		// scan with no probe request, only wait beacon and probe response
-#define SCAN_ACTIVE                      19		// scan with probe request, and wait beacon and probe response
-#define	SCAN_CISCO_PASSIVE				 20		// Single channel passive scan
-#define	SCAN_CISCO_ACTIVE				 21		// Single channel active scan
-#define	SCAN_CISCO_NOISE				 22		// Single channel passive scan for noise histogram collection
-#define	SCAN_CISCO_CHANNEL_LOAD			 23		// Single channel passive scan for channel load collection
-#define FAST_SCAN_ACTIVE                 24		// scan with probe request, and wait beacon and probe response
-
-#ifdef DOT11N_DRAFT3
-#define SCAN_2040_BSS_COEXIST                  26
-#endif // DOT11N_DRAFT3 //
-
-//#define BSS_TABLE_EMPTY(x)             ((x).BssNr == 0)
-#define MAC_ADDR_IS_GROUP(Addr)       (((Addr[0]) & 0x01))
-#define MAC_ADDR_HASH(Addr)            (Addr[0] ^ Addr[1] ^ Addr[2] ^ Addr[3] ^ Addr[4] ^ Addr[5])
-#define MAC_ADDR_HASH_INDEX(Addr)      (MAC_ADDR_HASH(Addr) % HASH_TABLE_SIZE)
-#define TID_MAC_HASH(Addr,TID)            (TID^Addr[0] ^ Addr[1] ^ Addr[2] ^ Addr[3] ^ Addr[4] ^ Addr[5])
-#define TID_MAC_HASH_INDEX(Addr,TID)      (TID_MAC_HASH(Addr,TID) % HASH_TABLE_SIZE)
-
-// LED Control
-// assoiation ON. one LED ON. another blinking when TX, OFF when idle
-// no association, both LED off
-#define ASIC_LED_ACT_ON(pAd)        RTMP_IO_WRITE32(pAd, MAC_CSR14, 0x00031e46)
-#define ASIC_LED_ACT_OFF(pAd)       RTMP_IO_WRITE32(pAd, MAC_CSR14, 0x00001e46)
-
-// bit definition of the 2-byte pBEACON->Capability field
-#define CAP_IS_ESS_ON(x)                 (((x) & 0x0001) != 0)
-#define CAP_IS_IBSS_ON(x)                (((x) & 0x0002) != 0)
-#define CAP_IS_CF_POLLABLE_ON(x)         (((x) & 0x0004) != 0)
-#define CAP_IS_CF_POLL_REQ_ON(x)         (((x) & 0x0008) != 0)
-#define CAP_IS_PRIVACY_ON(x)             (((x) & 0x0010) != 0)
-#define CAP_IS_SHORT_PREAMBLE_ON(x)      (((x) & 0x0020) != 0)
-#define CAP_IS_PBCC_ON(x)                (((x) & 0x0040) != 0)
-#define CAP_IS_AGILITY_ON(x)             (((x) & 0x0080) != 0)
-#define CAP_IS_SPECTRUM_MGMT(x)          (((x) & 0x0100) != 0)  // 802.11e d9
-#define CAP_IS_QOS(x)                    (((x) & 0x0200) != 0)  // 802.11e d9
-#define CAP_IS_SHORT_SLOT(x)             (((x) & 0x0400) != 0)
-#define CAP_IS_APSD(x)                   (((x) & 0x0800) != 0)  // 802.11e d9
-#define CAP_IS_IMMED_BA(x)               (((x) & 0x1000) != 0)  // 802.11e d9
-#define CAP_IS_DSSS_OFDM(x)              (((x) & 0x2000) != 0)
-#define CAP_IS_DELAY_BA(x)               (((x) & 0x4000) != 0)  // 802.11e d9
-
-#define CAP_GENERATE(ess,ibss,priv,s_pre,s_slot,spectrum)  (((ess) ? 0x0001 : 0x0000) | ((ibss) ? 0x0002 : 0x0000) | ((priv) ? 0x0010 : 0x0000) | ((s_pre) ? 0x0020 : 0x0000) | ((s_slot) ? 0x0400 : 0x0000) | ((spectrum) ? 0x0100 : 0x0000))
-
-//#define STA_QOS_CAPABILITY               0 // 1-byte. see 802.11e d9.0 for bit definition
-
-#define ERP_IS_NON_ERP_PRESENT(x)        (((x) & 0x01) != 0)    // 802.11g
-#define ERP_IS_USE_PROTECTION(x)         (((x) & 0x02) != 0)    // 802.11g
-#define ERP_IS_USE_BARKER_PREAMBLE(x)    (((x) & 0x04) != 0)    // 802.11g
-
-#define DRS_TX_QUALITY_WORST_BOUND       8// 3  // just test by gary
-#define DRS_PENALTY                      8
-
-#define BA_NOTUSE 	2
-//BA Policy subfiled value in ADDBA frame
-#define IMMED_BA 	1
-#define DELAY_BA	0
-
-// BA Initiator subfield in DELBA frame
-#define ORIGINATOR	1
-#define RECIPIENT	0
-
-// ADDBA Status Code
-#define ADDBA_RESULTCODE_SUCCESS					0
-#define ADDBA_RESULTCODE_REFUSED					37
-#define ADDBA_RESULTCODE_INVALID_PARAMETERS			38
-
-// DELBA Reason Code
-#define DELBA_REASONCODE_QSTA_LEAVING				36
-#define DELBA_REASONCODE_END_BA						37
-#define DELBA_REASONCODE_UNKNOWN_BA					38
-#define DELBA_REASONCODE_TIMEOUT					39
-
-// reset all OneSecTx counters
-#define RESET_ONE_SEC_TX_CNT(__pEntry) \
-if (((__pEntry)) != NULL) \
-{ \
-	(__pEntry)->OneSecTxRetryOkCount = 0; \
-	(__pEntry)->OneSecTxFailCount = 0; \
-	(__pEntry)->OneSecTxNoRetryOkCount = 0; \
-}
-
-//
-// 802.11 frame formats
-//
-//  HT Capability INFO field in HT Cap IE .
-typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-	USHORT	LSIGTxopProSup:1;
-	USHORT	Forty_Mhz_Intolerant:1;
-	USHORT	PSMP:1;
-	USHORT	CCKmodein40:1;
-	USHORT	AMsduSize:1;
-	USHORT	DelayedBA:1;	//rt2860c not support
-	USHORT	RxSTBC:2;
-	USHORT	TxSTBC:1;
-	USHORT	ShortGIfor40:1;	//for40MHz
-	USHORT	ShortGIfor20:1;
-	USHORT	GF:1;	//green field
-	USHORT	MimoPs:2;//momi power safe
-	USHORT	ChannelWidth:1;
-	USHORT	AdvCoding:1;
-#else
-	USHORT	AdvCoding:1;
-	USHORT	ChannelWidth:1;
-	USHORT	MimoPs:2;//momi power safe
-	USHORT	GF:1;	//green field
-	USHORT	ShortGIfor20:1;
-	USHORT	ShortGIfor40:1;	//for40MHz
-	USHORT	TxSTBC:1;
-	USHORT	RxSTBC:2;
-	USHORT	DelayedBA:1;	//rt2860c not support
-	USHORT	AMsduSize:1;	// only support as zero
-	USHORT	CCKmodein40:1;
-	USHORT	PSMP:1;
-	USHORT	Forty_Mhz_Intolerant:1;
-	USHORT	LSIGTxopProSup:1;
-#endif	/* !RT_BIG_ENDIAN */
-} HT_CAP_INFO, *PHT_CAP_INFO;
-
-//  HT Capability INFO field in HT Cap IE .
-typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-	UCHAR	rsv:3;//momi power safe
-	UCHAR	MpduDensity:3;
-	UCHAR	MaxRAmpduFactor:2;
-#else
-	UCHAR	MaxRAmpduFactor:2;
-	UCHAR	MpduDensity:3;
-	UCHAR	rsv:3;//momi power safe
-#endif /* !RT_BIG_ENDIAN */
-} HT_CAP_PARM, *PHT_CAP_PARM;
-
-//  HT Capability INFO field in HT Cap IE .
-typedef struct PACKED {
-	UCHAR	MCSSet[10];
-	UCHAR	SupRate[2];  // unit : 1Mbps
-#ifdef RT_BIG_ENDIAN
-	UCHAR	rsv:3;
-	UCHAR	MpduDensity:1;
-	UCHAR	TxStream:2;
-	UCHAR	TxRxNotEqual:1;
-	UCHAR	TxMCSSetDefined:1;
-#else
-	UCHAR	TxMCSSetDefined:1;
-	UCHAR	TxRxNotEqual:1;
-	UCHAR	TxStream:2;
-	UCHAR	MpduDensity:1;
-	UCHAR	rsv:3;
-#endif // RT_BIG_ENDIAN //
-	UCHAR	rsv3[3];
-} HT_MCS_SET, *PHT_MCS_SET;
-
-//  HT Capability INFO field in HT Cap IE .
-typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-	USHORT	rsv2:4;
-	USHORT	RDGSupport:1;	//reverse Direction Grant  support
-	USHORT	PlusHTC:1;	//+HTC control field support
-	USHORT	MCSFeedback:2;	//0:no MCS feedback, 2:unsolicited MCS feedback, 3:Full MCS feedback,  1:rsv.
-	USHORT	rsv:5;//momi power safe
-	USHORT	TranTime:2;
-	USHORT	Pco:1;
-#else
-	USHORT	Pco:1;
-	USHORT	TranTime:2;
-	USHORT	rsv:5;//momi power safe
-	USHORT	MCSFeedback:2;	//0:no MCS feedback, 2:unsolicited MCS feedback, 3:Full MCS feedback,  1:rsv.
-	USHORT	PlusHTC:1;	//+HTC control field support
-	USHORT	RDGSupport:1;	//reverse Direction Grant  support
-	USHORT	rsv2:4;
-#endif /* RT_BIG_ENDIAN */
-} EXT_HT_CAP_INFO, *PEXT_HT_CAP_INFO;
-
-//  HT Beamforming field in HT Cap IE .
-typedef struct PACKED _HT_BF_CAP{
-#ifdef RT_BIG_ENDIAN
-	ULONG	rsv:3;
-	ULONG	ChanEstimation:2;
-	ULONG	CSIRowBFSup:2;
-	ULONG	ComSteerBFAntSup:2;
-	ULONG	NoComSteerBFAntSup:2;
-	ULONG	CSIBFAntSup:2;
-	ULONG	MinGrouping:2;
-	ULONG	ExpComBF:2;
-	ULONG	ExpNoComBF:2;
-	ULONG	ExpCSIFbk:2;
-	ULONG	ExpComSteerCapable:1;
-	ULONG	ExpNoComSteerCapable:1;
-	ULONG	ExpCSICapable:1;
-	ULONG	Calibration:2;
-	ULONG	ImpTxBFCapable:1;
-	ULONG	TxNDPCapable:1;
-	ULONG	RxNDPCapable:1;
-	ULONG	TxSoundCapable:1;
-	ULONG	RxSoundCapable:1;
-	ULONG	TxBFRecCapable:1;
-#else
-	ULONG	TxBFRecCapable:1;
-	ULONG	RxSoundCapable:1;
-	ULONG	TxSoundCapable:1;
-	ULONG	RxNDPCapable:1;
-	ULONG	TxNDPCapable:1;
-	ULONG	ImpTxBFCapable:1;
-	ULONG	Calibration:2;
-	ULONG	ExpCSICapable:1;
-	ULONG	ExpNoComSteerCapable:1;
-	ULONG	ExpComSteerCapable:1;
-	ULONG	ExpCSIFbk:2;
-	ULONG	ExpNoComBF:2;
-	ULONG	ExpComBF:2;
-	ULONG	MinGrouping:2;
-	ULONG	CSIBFAntSup:2;
-	ULONG	NoComSteerBFAntSup:2;
-	ULONG	ComSteerBFAntSup:2;
-	ULONG	CSIRowBFSup:2;
-	ULONG	ChanEstimation:2;
-	ULONG	rsv:3;
-#endif // RT_BIG_ENDIAN //
-} HT_BF_CAP, *PHT_BF_CAP;
-
-//  HT antenna selection field in HT Cap IE .
-typedef struct PACKED _HT_AS_CAP{
-#ifdef RT_BIG_ENDIAN
-	UCHAR	rsv:1;
-	UCHAR	TxSoundPPDU:1;
-	UCHAR	RxASel:1;
-	UCHAR	AntIndFbk:1;
-	UCHAR	ExpCSIFbk:1;
-	UCHAR	AntIndFbkTxASEL:1;
-	UCHAR	ExpCSIFbkTxASEL:1;
-	UCHAR	AntSelect:1;
-#else
-	UCHAR	AntSelect:1;
-	UCHAR	ExpCSIFbkTxASEL:1;
-	UCHAR	AntIndFbkTxASEL:1;
-	UCHAR	ExpCSIFbk:1;
-	UCHAR	AntIndFbk:1;
-	UCHAR	RxASel:1;
-	UCHAR	TxSoundPPDU:1;
-	UCHAR	rsv:1;
-#endif // RT_BIG_ENDIAN //
-} HT_AS_CAP, *PHT_AS_CAP;
-
-// Draft 1.0 set IE length 26, but is extensible..
-#define SIZE_HT_CAP_IE		26
-// The structure for HT Capability IE.
-typedef struct PACKED _HT_CAPABILITY_IE{
-	HT_CAP_INFO		HtCapInfo;
-	HT_CAP_PARM		HtCapParm;
-//	HT_MCS_SET		HtMCSSet;
-	UCHAR			MCSSet[16];
-	EXT_HT_CAP_INFO	ExtHtCapInfo;
-	HT_BF_CAP		TxBFCap;	// beamforming cap. rt2860c not support beamforming.
-	HT_AS_CAP		ASCap;	//antenna selection.
-} HT_CAPABILITY_IE, *PHT_CAPABILITY_IE;
-
-
-// 802.11n draft3 related structure definitions.
-// 7.3.2.60
-#define dot11OBSSScanPassiveDwell							20	// in TU. min amount of time that the STA continously scans each channel when performing an active OBSS scan.
-#define dot11OBSSScanActiveDwell							10	// in TU.min amount of time that the STA continously scans each channel when performing an passive OBSS scan.
-#define dot11BSSWidthTriggerScanInterval					300  // in sec. max interval between scan operations to be performed to detect BSS channel width trigger events.
-#define dot11OBSSScanPassiveTotalPerChannel					200	// in TU. min total amount of time that the STA scans each channel when performing a passive OBSS scan.
-#define dot11OBSSScanActiveTotalPerChannel					20	//in TU. min total amount of time that the STA scans each channel when performing a active OBSS scan
-#define dot11BSSWidthChannelTransactionDelayFactor			5	// min ratio between the delay time in performing a switch from 20MHz BSS to 20/40 BSS operation and the maxima
-																//	interval between overlapping BSS scan operations.
-#define dot11BSSScanActivityThreshold						25	// in %%, max total time that a STA may be active on the medium during a period of
-																//	(dot11BSSWidthChannelTransactionDelayFactor * dot11BSSWidthTriggerScanInterval) seconds without
-																//	being obligated to perform OBSS Scan operations. default is 25(== 0.25%)
-
-typedef struct PACKED _OVERLAP_BSS_SCAN_IE{
-	USHORT		ScanPassiveDwell;
-	USHORT		ScanActiveDwell;
-	USHORT		TriggerScanInt;				// Trigger scan interval
-	USHORT		PassiveTalPerChannel;		// passive total per channel
-	USHORT		ActiveTalPerChannel;		// active total per channel
-	USHORT		DelayFactor;				// BSS width channel transition delay factor
-	USHORT		ScanActThre;				// Scan Activity threshold
-}OVERLAP_BSS_SCAN_IE, *POVERLAP_BSS_SCAN_IE;
-
-
-//  7.3.2.56. 20/40 Coexistence element used in  Element ID = 72 = IE_2040_BSS_COEXIST
-typedef union PACKED _BSS_2040_COEXIST_IE{
- struct PACKED {
- #ifdef RT_BIG_ENDIAN
-	UCHAR	rsv:5;
-	UCHAR	BSS20WidthReq:1;
-	UCHAR	Intolerant40:1;
-	UCHAR	InfoReq:1;
- #else
-	UCHAR	InfoReq:1;
-	UCHAR	Intolerant40:1;			// Inter-BSS. set 1 when prohibits a receiving BSS from operating as a 20/40 Mhz BSS.
-	UCHAR	BSS20WidthReq:1;		// Intra-BSS set 1 when prohibits a receiving AP from operating its BSS as a 20/40MHz BSS.
-	UCHAR	rsv:5;
-#endif // RT_BIG_ENDIAN //
-    } field;
- UCHAR   word;
-} BSS_2040_COEXIST_IE, *PBSS_2040_COEXIST_IE;
-
-
-typedef struct  _TRIGGER_EVENTA{
-	BOOLEAN			bValid;
-	UCHAR	BSSID[6];
-	UCHAR	RegClass;	// Regulatory Class
-	USHORT	Channel;
-	ULONG	CDCounter;   // Maintain a seperate count down counter for each Event A.
-} TRIGGER_EVENTA, *PTRIGGER_EVENTA;
-
-// 20/40 trigger event table
-// If one Event A delete or created, or if Event B is detected or not detected, STA should send 2040BSSCoexistence to AP.
-#define MAX_TRIGGER_EVENT		64
-typedef struct  _TRIGGER_EVENT_TAB{
-	UCHAR	EventANo;
-	TRIGGER_EVENTA	EventA[MAX_TRIGGER_EVENT];
-	ULONG			EventBCountDown;	// Count down counter for Event B.
-} TRIGGER_EVENT_TAB, *PTRIGGER_EVENT_TAB;
-
-// 7.3.27 20/40 Bss Coexistence Mgmt capability used in extended capabilities information IE( ID = 127 = IE_EXT_CAPABILITY).
-//	This is the first octet and was defined in 802.11n D3.03 and 802.11yD9.0
-typedef struct PACKED _EXT_CAP_INFO_ELEMENT{
-#ifdef RT_BIG_ENDIAN
-	UCHAR	rsv2:5;
-	UCHAR	ExtendChannelSwitch:1;
-	UCHAR	rsv:1;
-	UCHAR	BssCoexistMgmtSupport:1;
-#else
-	UCHAR	BssCoexistMgmtSupport:1;
-	UCHAR	rsv:1;
-	UCHAR	ExtendChannelSwitch:1;
-	UCHAR	rsv2:5;
-#endif // RT_BIG_ENDIAN //
-}EXT_CAP_INFO_ELEMENT, *PEXT_CAP_INFO_ELEMENT;
-
-
-// 802.11n 7.3.2.61
-typedef struct PACKED _BSS_2040_COEXIST_ELEMENT{
-	UCHAR					ElementID;		// ID = IE_2040_BSS_COEXIST = 72
-	UCHAR					Len;
-	BSS_2040_COEXIST_IE		BssCoexistIe;
-}BSS_2040_COEXIST_ELEMENT, *PBSS_2040_COEXIST_ELEMENT;
-
-
-//802.11n 7.3.2.59
-typedef struct PACKED _BSS_2040_INTOLERANT_CH_REPORT{
-	UCHAR				ElementID;		// ID = IE_2040_BSS_INTOLERANT_REPORT = 73
-	UCHAR				Len;
-	UCHAR				RegulatoryClass;
-	UCHAR				ChList[0];
-}BSS_2040_INTOLERANT_CH_REPORT, *PBSS_2040_INTOLERANT_CH_REPORT;
-
-
-// The structure for channel switch annoucement IE. This is in 802.11n D3.03
-typedef struct PACKED _CHA_SWITCH_ANNOUNCE_IE{
-	UCHAR			SwitchMode;	//channel switch mode
-	UCHAR			NewChannel;	//
-	UCHAR			SwitchCount;	//
-} CHA_SWITCH_ANNOUNCE_IE, *PCHA_SWITCH_ANNOUNCE_IE;
-
-
-// The structure for channel switch annoucement IE. This is in 802.11n D3.03
-typedef struct PACKED _SEC_CHA_OFFSET_IE{
-	UCHAR			SecondaryChannelOffset;	 // 1: Secondary above, 3: Secondary below, 0: no Secondary
-} SEC_CHA_OFFSET_IE, *PSEC_CHA_OFFSET_IE;
-
-
-// This structure is extracted from struct RT_HT_CAPABILITY
-typedef struct {
-	BOOLEAN			bHtEnable;	 // If we should use ht rate.
-	BOOLEAN			bPreNHt;	 // If we should use ht rate.
-	//Substract from HT Capability IE
-	UCHAR			MCSSet[16];	//only supoort MCS=0-15,32 ,
-} RT_HT_PHY_INFO, *PRT_HT_PHY_INFO;
-
-//This structure substracts ralink supports from all 802.11n-related features.
-//Features not listed here but contained in 802.11n spec are not supported in rt2860.
-typedef struct {
-#if 0	// move to
-	BOOLEAN			bHtEnable;	 // If we should use ht rate.
-	BOOLEAN			bPreNHt;	 // If we should use ht rate.
-	//Substract from HT Capability IE
-	UCHAR			MCSSet[16];	//only supoort MCS=0-15,32 ,
-#endif
-#ifdef RT_BIG_ENDIAN
-	USHORT	rsv:5;
-	USHORT	AmsduSize:1;	// Max receiving A-MSDU size
-	USHORT	AmsduEnable:1;	// Enable to transmit A-MSDU. Suggest disable. We should use A-MPDU to gain best benifit of 802.11n
-	USHORT	RxSTBC:2;	// 2 bits
-	USHORT	TxSTBC:1;
-	USHORT	ShortGIfor40:1;	//for40MHz
-	USHORT	ShortGIfor20:1;
-	USHORT	GF:1;	//green field
-	USHORT	MimoPs:2;//mimo power safe MMPS_
-	USHORT	ChannelWidth:1;
-#else
-	USHORT	ChannelWidth:1;
-	USHORT	MimoPs:2;//mimo power safe MMPS_
-	USHORT	GF:1;	//green field
-	USHORT	ShortGIfor20:1;
-	USHORT	ShortGIfor40:1;	//for40MHz
-	USHORT	TxSTBC:1;
-	USHORT	RxSTBC:2;	// 2 bits
-	USHORT	AmsduEnable:1;	// Enable to transmit A-MSDU. Suggest disable. We should use A-MPDU to gain best benifit of 802.11n
-	USHORT	AmsduSize:1;	// Max receiving A-MSDU size
-	USHORT	rsv:5;
-#endif
-
-	//Substract from Addiont HT INFO IE
-#ifdef RT_BIG_ENDIAN
-	UCHAR	RecomWidth:1;
-	UCHAR	ExtChanOffset:2;	// Please not the difference with following 	UCHAR	NewExtChannelOffset; from 802.11n
-	UCHAR	MpduDensity:3;
-	UCHAR	MaxRAmpduFactor:2;
-#else
-	UCHAR	MaxRAmpduFactor:2;
-	UCHAR	MpduDensity:3;
-	UCHAR	ExtChanOffset:2;	// Please not the difference with following 	UCHAR	NewExtChannelOffset; from 802.11n
-	UCHAR	RecomWidth:1;
-#endif
-
-#ifdef RT_BIG_ENDIAN
-	USHORT	rsv2:11;
-	USHORT	OBSS_NonHTExist:1;
-	USHORT	rsv3:1;
-	USHORT	NonGfPresent:1;
-	USHORT	OperaionMode:2;
-#else
-	USHORT	OperaionMode:2;
-	USHORT	NonGfPresent:1;
-	USHORT	rsv3:1;
-	USHORT	OBSS_NonHTExist:1;
-	USHORT	rsv2:11;
-#endif
-
-	// New Extension Channel Offset IE
-	UCHAR	NewExtChannelOffset;
-	// Extension Capability IE = 127
-	UCHAR	BSSCoexist2040;
-} RT_HT_CAPABILITY, *PRT_HT_CAPABILITY;
-
-//   field in Addtional HT Information IE .
-typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-	UCHAR	SerInterGranu:3;
-	UCHAR	S_PSMPSup:1;
-	UCHAR	RifsMode:1;
-	UCHAR	RecomWidth:1;
-	UCHAR	ExtChanOffset:2;
-#else
-	UCHAR	ExtChanOffset:2;
-	UCHAR	RecomWidth:1;
-	UCHAR	RifsMode:1;
-	UCHAR	S_PSMPSup:1;	 //Indicate support for scheduled PSMP
-	UCHAR	SerInterGranu:3;	 //service interval granularity
-#endif
-} ADD_HTINFO, *PADD_HTINFO;
-
-typedef struct PACKED{
-#ifdef RT_BIG_ENDIAN
-	USHORT	rsv2:11;
-	USHORT	OBSS_NonHTExist:1;
-	USHORT	rsv:1;
-	USHORT	NonGfPresent:1;
-	USHORT	OperaionMode:2;
-#else
-	USHORT	OperaionMode:2;
-	USHORT	NonGfPresent:1;
-	USHORT	rsv:1;
-	USHORT	OBSS_NonHTExist:1;
-	USHORT	rsv2:11;
-#endif
-} ADD_HTINFO2, *PADD_HTINFO2;
-
-
-// TODO: Need sync with spec about the definition of StbcMcs. In Draft 3.03, it's reserved.
-typedef struct PACKED{
-#ifdef RT_BIG_ENDIAN
-	USHORT	rsv:4;
-	USHORT	PcoPhase:1;
-	USHORT	PcoActive:1;
-	USHORT	LsigTxopProt:1;
-	USHORT	STBCBeacon:1;
-	USHORT	DualCTSProtect:1;
-	USHORT	DualBeacon:1;
-	USHORT	StbcMcs:6;
-#else
-	USHORT	StbcMcs:6;
-	USHORT	DualBeacon:1;
-	USHORT	DualCTSProtect:1;
-	USHORT	STBCBeacon:1;
-	USHORT	LsigTxopProt:1;	// L-SIG TXOP protection full support
-	USHORT	PcoActive:1;
-	USHORT	PcoPhase:1;
-	USHORT	rsv:4;
-#endif // RT_BIG_ENDIAN //
-} ADD_HTINFO3, *PADD_HTINFO3;
-
-#define SIZE_ADD_HT_INFO_IE		22
-typedef struct  PACKED{
-	UCHAR				ControlChan;
-	ADD_HTINFO			AddHtInfo;
-	ADD_HTINFO2			AddHtInfo2;
-	ADD_HTINFO3			AddHtInfo3;
-	UCHAR				MCSSet[16];		// Basic MCS set
-} ADD_HT_INFO_IE, *PADD_HT_INFO_IE;
-
-typedef struct  PACKED{
-	UCHAR				NewExtChanOffset;
-} NEW_EXT_CHAN_IE, *PNEW_EXT_CHAN_IE;
-
-
-// 4-byte HTC field.  maybe included in any frame except non-QOS data frame.  The Order bit must set 1.
-typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-    UINT32		RDG:1;	//RDG / More PPDU
-    UINT32		ACConstraint:1;	//feedback request
-    UINT32		rsv:5;  //calibration sequence
-    UINT32		ZLFAnnouce:1;	// ZLF announcement
-    UINT32		CSISTEERING:2;	//CSI/ STEERING
-    UINT32		FBKReq:2;	//feedback request
-    UINT32		CalSeq:2;  //calibration sequence
-    UINT32		CalPos:2;	// calibration position
-    UINT32		MFBorASC:7;	//Link adaptation feedback containing recommended MCS. 0x7f for no feedback or not available
-    UINT32		MFS:3;	//SET to the received value of MRS. 0x111 for unsolicited MFB.
-    UINT32		MRSorASI:3;	// MRQ Sequence identifier. unchanged during entire procedure. 0x000-0x110.
-    UINT32		MRQ:1;	//MCS feedback. Request for a MCS feedback
-    UINT32		TRQ:1;	//sounding request
-    UINT32		MA:1;	//management action payload exist in (QoS Null+HTC)
-#else
-    UINT32		MA:1;	//management action payload exist in (QoS Null+HTC)
-    UINT32		TRQ:1;	//sounding request
-    UINT32		MRQ:1;	//MCS feedback. Request for a MCS feedback
-    UINT32		MRSorASI:3;	// MRQ Sequence identifier. unchanged during entire procedure. 0x000-0x110.
-    UINT32		MFS:3;	//SET to the received value of MRS. 0x111 for unsolicited MFB.
-    UINT32		MFBorASC:7;	//Link adaptation feedback containing recommended MCS. 0x7f for no feedback or not available
-    UINT32		CalPos:2;	// calibration position
-    UINT32		CalSeq:2;  //calibration sequence
-    UINT32		FBKReq:2;	//feedback request
-    UINT32		CSISTEERING:2;	//CSI/ STEERING
-    UINT32		ZLFAnnouce:1;	// ZLF announcement
-    UINT32		rsv:5;  //calibration sequence
-    UINT32		ACConstraint:1;	//feedback request
-    UINT32		RDG:1;	//RDG / More PPDU
-#endif /* !RT_BIG_ENDIAN */
-} HT_CONTROL, *PHT_CONTROL;
-
-// 2-byte QOS CONTROL field
-typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-    USHORT      Txop_QueueSize:8;
-    USHORT      AMsduPresent:1;
-    USHORT      AckPolicy:2;  //0: normal ACK 1:No ACK 2:scheduled under MTBA/PSMP  3: BA
-    USHORT      EOSP:1;
-    USHORT      TID:4;
-#else
-    USHORT      TID:4;
-    USHORT      EOSP:1;
-    USHORT      AckPolicy:2;  //0: normal ACK 1:No ACK 2:scheduled under MTBA/PSMP  3: BA
-    USHORT      AMsduPresent:1;
-    USHORT      Txop_QueueSize:8;
-#endif /* !RT_BIG_ENDIAN */
-} QOS_CONTROL, *PQOS_CONTROL;
-
-// 2-byte Frame control field
-typedef	struct	PACKED {
-#ifdef RT_BIG_ENDIAN
-	USHORT		Order:1;			// Strict order expected
-	USHORT		Wep:1;				// Wep data
-	USHORT		MoreData:1;			// More data bit
-	USHORT		PwrMgmt:1;			// Power management bit
-	USHORT		Retry:1;			// Retry status bit
-	USHORT		MoreFrag:1;			// More fragment bit
-	USHORT		FrDs:1;				// From DS indication
-	USHORT		ToDs:1;				// To DS indication
-	USHORT		SubType:4;			// MSDU subtype
-	USHORT		Type:2;				// MSDU type
-	USHORT		Ver:2;				// Protocol version
-#else
-	USHORT		Ver:2;				// Protocol version
-	USHORT		Type:2;				// MSDU type
-	USHORT		SubType:4;			// MSDU subtype
-	USHORT		ToDs:1;				// To DS indication
-	USHORT		FrDs:1;				// From DS indication
-	USHORT		MoreFrag:1;			// More fragment bit
-	USHORT		Retry:1;			// Retry status bit
-	USHORT		PwrMgmt:1;			// Power management bit
-	USHORT		MoreData:1;			// More data bit
-	USHORT		Wep:1;				// Wep data
-	USHORT		Order:1;			// Strict order expected
-#endif /* !RT_BIG_ENDIAN */
-} FRAME_CONTROL, *PFRAME_CONTROL;
-
-typedef	struct	PACKED _HEADER_802_11	{
-    FRAME_CONTROL   FC;
-    USHORT          Duration;
-    UCHAR           Addr1[MAC_ADDR_LEN];
-    UCHAR           Addr2[MAC_ADDR_LEN];
-	UCHAR			Addr3[MAC_ADDR_LEN];
-#ifdef RT_BIG_ENDIAN
-	USHORT			Sequence:12;
-	USHORT			Frag:4;
-#else
-	USHORT			Frag:4;
-	USHORT			Sequence:12;
-#endif /* !RT_BIG_ENDIAN */
-	UCHAR			Octet[0];
-}	HEADER_802_11, *PHEADER_802_11;
-
-typedef struct PACKED _FRAME_802_11 {
-    HEADER_802_11   Hdr;
-    UCHAR            Octet[1];
-}   FRAME_802_11, *PFRAME_802_11;
-
-// QoSNull embedding of management action. When HT Control MA field set to 1.
-typedef struct PACKED _MA_BODY {
-    UCHAR            Category;
-    UCHAR            Action;
-    UCHAR            Octet[1];
-}   MA_BODY, *PMA_BODY;
-
-typedef	struct	PACKED _HEADER_802_3	{
-    UCHAR           DAAddr1[MAC_ADDR_LEN];
-    UCHAR           SAAddr2[MAC_ADDR_LEN];
-    UCHAR           Octet[2];
-}	HEADER_802_3, *PHEADER_802_3;
-////Block ACK related format
-// 2-byte BA Parameter  field  in 	DELBA frames to terminate an already set up bA
-typedef struct PACKED{
-#ifdef RT_BIG_ENDIAN
-    USHORT      TID:4;	// value of TC os TS
-    USHORT      Initiator:1;	// 1: originator    0:recipient
-    USHORT      Rsv:11;	// always set to 0
-#else
-    USHORT      Rsv:11;	// always set to 0
-    USHORT      Initiator:1;	// 1: originator    0:recipient
-    USHORT      TID:4;	// value of TC os TS
-#endif /* !RT_BIG_ENDIAN */
-} DELBA_PARM, *PDELBA_PARM;
-
-// 2-byte BA Parameter Set field  in ADDBA frames to signal parm for setting up a BA
-typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-    USHORT      BufSize:10;	// number of buffe of size 2304 octetsr
-    USHORT      TID:4;	// value of TC os TS
-    USHORT      BAPolicy:1;	// 1: immediately BA    0:delayed BA
-    USHORT      AMSDUSupported:1;	// 0: not permitted		1: permitted
-#else
-    USHORT      AMSDUSupported:1;	// 0: not permitted		1: permitted
-    USHORT      BAPolicy:1;	// 1: immediately BA    0:delayed BA
-    USHORT      TID:4;	// value of TC os TS
-    USHORT      BufSize:10;	// number of buffe of size 2304 octetsr
-#endif /* !RT_BIG_ENDIAN */
-} BA_PARM, *PBA_PARM;
-
-// 2-byte BA Starting Seq CONTROL field
-typedef union PACKED {
-    struct PACKED {
-#ifdef RT_BIG_ENDIAN
-    USHORT      StartSeq:12;   // sequence number of the 1st MSDU for which this BAR is sent
-	USHORT      FragNum:4;	// always set to 0
-#else
-    USHORT      FragNum:4;	// always set to 0
-	USHORT      StartSeq:12;   // sequence number of the 1st MSDU for which this BAR is sent
-#endif /* RT_BIG_ENDIAN */
-    }   field;
-    USHORT           word;
-} BASEQ_CONTROL, *PBASEQ_CONTROL;
-
-//BAControl and BARControl are the same
-// 2-byte BA CONTROL field in BA frame
-typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-    USHORT      TID:4;
-    USHORT      Rsv:9;
-    USHORT      Compressed:1;
-    USHORT      MTID:1;		//EWC V1.24
-    USHORT      ACKPolicy:1; // only related to N-Delayed BA. But not support in RT2860b. 0:NormalACK  1:No ACK
-#else
-    USHORT      ACKPolicy:1; // only related to N-Delayed BA. But not support in RT2860b. 0:NormalACK  1:No ACK
-    USHORT      MTID:1;		//EWC V1.24
-    USHORT      Compressed:1;
-    USHORT      Rsv:9;
-    USHORT      TID:4;
-#endif /* !RT_BIG_ENDIAN */
-} BA_CONTROL, *PBA_CONTROL;
-
-// 2-byte BAR CONTROL field in BAR frame
-typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-    USHORT      TID:4;
-    USHORT      Rsv1:9;
-    USHORT      Compressed:1;
-    USHORT      MTID:1;		//if this bit1, use  FRAME_MTBA_REQ,  if 0, use FRAME_BA_REQ
-    USHORT      ACKPolicy:1;
-#else
-    USHORT      ACKPolicy:1; // 0:normal ack,  1:no ack.
-    USHORT      MTID:1;		//if this bit1, use  FRAME_MTBA_REQ,  if 0, use FRAME_BA_REQ
-    USHORT      Compressed:1;
-    USHORT      Rsv1:9;
-    USHORT      TID:4;
-#endif /* !RT_BIG_ENDIAN */
-} BAR_CONTROL, *PBAR_CONTROL;
-
-// BARControl in MTBAR frame
-typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-    USHORT      NumTID:4;
-    USHORT      Rsv1:9;
-    USHORT      Compressed:1;
-    USHORT      MTID:1;
-    USHORT      ACKPolicy:1;
-#else
-    USHORT      ACKPolicy:1;
-    USHORT      MTID:1;
-    USHORT      Compressed:1;
-    USHORT      Rsv1:9;
-    USHORT      NumTID:4;
-#endif /* !RT_BIG_ENDIAN */
-} MTBAR_CONTROL, *PMTBAR_CONTROL;
-
-typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-    USHORT      TID:4;
-    USHORT      Rsv1:12;
-#else
-    USHORT      Rsv1:12;
-    USHORT      TID:4;
-#endif /* !RT_BIG_ENDIAN */
-} PER_TID_INFO, *PPER_TID_INFO;
-
-typedef struct {
-	PER_TID_INFO      PerTID;
-	BASEQ_CONTROL 	 BAStartingSeq;
-} EACH_TID, *PEACH_TID;
-
-
-typedef struct PACKED _PSPOLL_FRAME {
-    FRAME_CONTROL   FC;
-    USHORT          Aid;
-    UCHAR           Bssid[MAC_ADDR_LEN];
-    UCHAR           Ta[MAC_ADDR_LEN];
-}   PSPOLL_FRAME, *PPSPOLL_FRAME;
-
-typedef	struct	PACKED _RTS_FRAME	{
-    FRAME_CONTROL   FC;
-    USHORT          Duration;
-    UCHAR           Addr1[MAC_ADDR_LEN];
-    UCHAR           Addr2[MAC_ADDR_LEN];
-}RTS_FRAME, *PRTS_FRAME;
-
-// BAREQ AND MTBAREQ have the same subtype BAR, 802.11n BAR use compressed bitmap.
-typedef struct PACKED _FRAME_BA_REQ {
-	FRAME_CONTROL   FC;
-	USHORT          Duration;
-	UCHAR           Addr1[MAC_ADDR_LEN];
-	UCHAR           Addr2[MAC_ADDR_LEN];
-	BAR_CONTROL  BARControl;
-	BASEQ_CONTROL 	 BAStartingSeq;
-}   FRAME_BA_REQ, *PFRAME_BA_REQ;
-
-typedef struct PACKED _FRAME_MTBA_REQ {
-	FRAME_CONTROL   FC;
-	USHORT          Duration;
-	UCHAR           Addr1[MAC_ADDR_LEN];
-	UCHAR           Addr2[MAC_ADDR_LEN];
-	MTBAR_CONTROL  MTBARControl;
-	PER_TID_INFO	PerTIDInfo;
-	BASEQ_CONTROL 	 BAStartingSeq;
-}   FRAME_MTBA_REQ, *PFRAME_MTBA_REQ;
-
-// Compressed format is mandantory in HT STA
-typedef struct PACKED _FRAME_MTBA {
-	FRAME_CONTROL   FC;
-	USHORT          Duration;
-	UCHAR           Addr1[MAC_ADDR_LEN];
-	UCHAR           Addr2[MAC_ADDR_LEN];
-	BA_CONTROL  BAControl;
-	BASEQ_CONTROL 	 BAStartingSeq;
-	UCHAR		BitMap[8];
-}   FRAME_MTBA, *PFRAME_MTBA;
-
-typedef struct PACKED _FRAME_PSMP_ACTION {
-	HEADER_802_11   Hdr;
-	UCHAR	Category;
-	UCHAR	Action;
-	UCHAR	Psmp;	// 7.3.1.25
-}   FRAME_PSMP_ACTION, *PFRAME_PSMP_ACTION;
-
-typedef struct PACKED _FRAME_ACTION_HDR {
-	HEADER_802_11   Hdr;
-	UCHAR	Category;
-	UCHAR	Action;
-}   FRAME_ACTION_HDR, *PFRAME_ACTION_HDR;
-
-//Action Frame
-//Action Frame  Category:Spectrum,  Action:Channel Switch. 7.3.2.20
-typedef struct PACKED _CHAN_SWITCH_ANNOUNCE {
-	UCHAR					ElementID;	// ID = IE_CHANNEL_SWITCH_ANNOUNCEMENT = 37
-	UCHAR					Len;
-	CHA_SWITCH_ANNOUNCE_IE	CSAnnounceIe;
-}   CHAN_SWITCH_ANNOUNCE, *PCHAN_SWITCH_ANNOUNCE;
-
-
-//802.11n : 7.3.2.20a
-typedef struct PACKED _SECOND_CHAN_OFFSET {
-	UCHAR				ElementID;		// ID = IE_SECONDARY_CH_OFFSET = 62
-	UCHAR				Len;
-	SEC_CHA_OFFSET_IE	SecChOffsetIe;
-}   SECOND_CHAN_OFFSET, *PSECOND_CHAN_OFFSET;
-
-
-typedef struct PACKED _FRAME_SPETRUM_CS {
-	HEADER_802_11   Hdr;
-	UCHAR	Category;
-	UCHAR	Action;
-	CHAN_SWITCH_ANNOUNCE	CSAnnounce;
-	SECOND_CHAN_OFFSET		SecondChannel;
-}   FRAME_SPETRUM_CS, *PFRAME_SPETRUM_CS;
-
-
-typedef struct PACKED _FRAME_ADDBA_REQ {
-	HEADER_802_11   Hdr;
-	UCHAR	Category;
-	UCHAR	Action;
-	UCHAR	Token;	// 1
-	BA_PARM		BaParm;	      //  2 - 10
-	USHORT		TimeOutValue;	// 0 - 0
-	BASEQ_CONTROL	BaStartSeq; // 0-0
-}   FRAME_ADDBA_REQ, *PFRAME_ADDBA_REQ;
-
-typedef struct PACKED _FRAME_ADDBA_RSP {
-	HEADER_802_11   Hdr;
-	UCHAR	Category;
-	UCHAR	Action;
-	UCHAR	Token;
-	USHORT	StatusCode;
-	BA_PARM		BaParm; //0 - 2
-	USHORT		TimeOutValue;
-}   FRAME_ADDBA_RSP, *PFRAME_ADDBA_RSP;
-
-typedef struct PACKED _FRAME_DELBA_REQ {
-	HEADER_802_11   Hdr;
-	UCHAR	Category;
-	UCHAR	Action;
-	DELBA_PARM		DelbaParm;
-	USHORT	ReasonCode;
-}   FRAME_DELBA_REQ, *PFRAME_DELBA_REQ;
-
-
-//7.2.1.7
-typedef struct PACKED _FRAME_BAR {
-	FRAME_CONTROL   FC;
-	USHORT          Duration;
-	UCHAR           Addr1[MAC_ADDR_LEN];
-	UCHAR           Addr2[MAC_ADDR_LEN];
-	BAR_CONTROL		BarControl;
-	BASEQ_CONTROL	StartingSeq;
-}   FRAME_BAR, *PFRAME_BAR;
-
-//7.2.1.7
-typedef struct PACKED _FRAME_BA {
-	FRAME_CONTROL   FC;
-	USHORT          Duration;
-	UCHAR           Addr1[MAC_ADDR_LEN];
-	UCHAR           Addr2[MAC_ADDR_LEN];
-	BAR_CONTROL		BarControl;
-	BASEQ_CONTROL	StartingSeq;
-	UCHAR		bitmask[8];
-}   FRAME_BA, *PFRAME_BA;
-
-
-// Radio Measuement Request Frame Format
-typedef struct PACKED _FRAME_RM_REQ_ACTION {
-	HEADER_802_11   Hdr;
-	UCHAR	Category;
-	UCHAR	Action;
-	UCHAR	Token;
-	USHORT	Repetition;
-	UCHAR   data[0];
-}   FRAME_RM_REQ_ACTION, *PFRAME_RM_REQ_ACTION;
-
-typedef struct PACKED {
-	UCHAR		ID;
-	UCHAR		Length;
-	UCHAR		ChannelSwitchMode;
-	UCHAR		NewRegClass;
-	UCHAR		NewChannelNum;
-	UCHAR		ChannelSwitchCount;
-} HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE, *PHT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE;
-
-
-//
-// _Limit must be the 2**n - 1
-// _SEQ1 , _SEQ2 must be within 0 ~ _Limit
-//
-#define SEQ_STEPONE(_SEQ1, _SEQ2, _Limit)	((_SEQ1 == ((_SEQ2+1) & _Limit)))
-#define SEQ_SMALLER(_SEQ1, _SEQ2, _Limit)	(((_SEQ1-_SEQ2) & ((_Limit+1)>>1)))
-#define SEQ_LARGER(_SEQ1, _SEQ2, _Limit)	((_SEQ1 != _SEQ2) && !(((_SEQ1-_SEQ2) & ((_Limit+1)>>1))))
-#define SEQ_WITHIN_WIN(_SEQ1, _SEQ2, _WIN, _Limit) (SEQ_LARGER(_SEQ1, _SEQ2, _Limit) &&  \
-												SEQ_SMALLER(_SEQ1, ((_SEQ2+_WIN+1)&_Limit), _Limit))
-
-//
-// Contention-free parameter (without ID and Length)
-//
-typedef struct PACKED {
-    BOOLEAN     bValid;         // 1: variable contains valid value
-    UCHAR       CfpCount;
-    UCHAR       CfpPeriod;
-    USHORT      CfpMaxDuration;
-    USHORT      CfpDurRemaining;
-} CF_PARM, *PCF_PARM;
-
-typedef	struct	_CIPHER_SUITE	{
-	NDIS_802_11_ENCRYPTION_STATUS	PairCipher;		// Unicast cipher 1, this one has more secured cipher suite
-	NDIS_802_11_ENCRYPTION_STATUS	PairCipherAux;	// Unicast cipher 2 if AP announce two unicast cipher suite
-	NDIS_802_11_ENCRYPTION_STATUS	GroupCipher;	// Group cipher
-	USHORT							RsnCapability;	// RSN capability from beacon
-	BOOLEAN							bMixMode;		// Indicate Pair & Group cipher might be different
-}	CIPHER_SUITE, *PCIPHER_SUITE;
-
-// EDCA configuration from AP's BEACON/ProbeRsp
-typedef struct {
-    BOOLEAN     bValid;         // 1: variable contains valid value
-    BOOLEAN     bAdd;         // 1: variable contains valid value
-    BOOLEAN     bQAck;
-    BOOLEAN     bQueueRequest;
-    BOOLEAN     bTxopRequest;
-    BOOLEAN     bAPSDCapable;
-//  BOOLEAN     bMoreDataAck;
-    UCHAR       EdcaUpdateCount;
-    UCHAR       Aifsn[4];       // 0:AC_BK, 1:AC_BE, 2:AC_VI, 3:AC_VO
-    UCHAR       Cwmin[4];
-    UCHAR       Cwmax[4];
-    USHORT      Txop[4];      // in unit of 32-us
-    BOOLEAN     bACM[4];      // 1: Admission Control of AC_BK is mandattory
-} EDCA_PARM, *PEDCA_PARM;
-
-// QBSS LOAD information from QAP's BEACON/ProbeRsp
-typedef struct {
-    BOOLEAN     bValid;                     // 1: variable contains valid value
-    USHORT      StaNum;
-    UCHAR       ChannelUtilization;
-    USHORT      RemainingAdmissionControl;  // in unit of 32-us
-} QBSS_LOAD_PARM, *PQBSS_LOAD_PARM;
-
-// QBSS Info field in QSTA's assoc req
-typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-	UCHAR		Rsv2:1;
-	UCHAR		MaxSPLength:2;
-	UCHAR		Rsv1:1;
-	UCHAR		UAPSD_AC_BE:1;
-	UCHAR		UAPSD_AC_BK:1;
-	UCHAR		UAPSD_AC_VI:1;
-	UCHAR		UAPSD_AC_VO:1;
-#else
-    UCHAR		UAPSD_AC_VO:1;
-	UCHAR		UAPSD_AC_VI:1;
-	UCHAR		UAPSD_AC_BK:1;
-	UCHAR		UAPSD_AC_BE:1;
-	UCHAR		Rsv1:1;
-	UCHAR		MaxSPLength:2;
-	UCHAR		Rsv2:1;
-#endif /* !RT_BIG_ENDIAN */
-} QBSS_STA_INFO_PARM, *PQBSS_STA_INFO_PARM;
-
-// QBSS Info field in QAP's Beacon/ProbeRsp
-typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-	UCHAR		UAPSD:1;
-	UCHAR		Rsv:3;
-    UCHAR		ParamSetCount:4;
-#else
-    UCHAR		ParamSetCount:4;
-	UCHAR		Rsv:3;
-	UCHAR		UAPSD:1;
-#endif /* !RT_BIG_ENDIAN */
-} QBSS_AP_INFO_PARM, *PQBSS_AP_INFO_PARM;
-
-// QOS Capability reported in QAP's BEACON/ProbeRsp
-// QOS Capability sent out in QSTA's AssociateReq/ReAssociateReq
-typedef struct {
-    BOOLEAN     bValid;                     // 1: variable contains valid value
-    BOOLEAN     bQAck;
-    BOOLEAN     bQueueRequest;
-    BOOLEAN     bTxopRequest;
-//  BOOLEAN     bMoreDataAck;
-    UCHAR       EdcaUpdateCount;
-} QOS_CAPABILITY_PARM, *PQOS_CAPABILITY_PARM;
-
-#ifdef CONFIG_STA_SUPPORT
-typedef struct {
-    UCHAR       IELen;
-    UCHAR       IE[MAX_CUSTOM_LEN];
-} WPA_IE_;
-#endif // CONFIG_STA_SUPPORT //
-
-
-typedef struct {
-    UCHAR   Bssid[MAC_ADDR_LEN];
-    UCHAR   Channel;
-	UCHAR   CentralChannel;	//Store the wide-band central channel for 40MHz.  .used in 40MHz AP. Or this is the same as Channel.
-    UCHAR   BssType;
-    USHORT  AtimWin;
-    USHORT  BeaconPeriod;
-
-    UCHAR   SupRate[MAX_LEN_OF_SUPPORTED_RATES];
-    UCHAR   SupRateLen;
-    UCHAR   ExtRate[MAX_LEN_OF_SUPPORTED_RATES];
-    UCHAR   ExtRateLen;
-	HT_CAPABILITY_IE HtCapability;
-	UCHAR			HtCapabilityLen;
-	ADD_HT_INFO_IE AddHtInfo;	// AP might use this additional ht info IE
-	UCHAR			AddHtInfoLen;
-	UCHAR			NewExtChanOffset;
-	CHAR    Rssi;
-    UCHAR   Privacy;			// Indicate security function ON/OFF. Don't mess up with auth mode.
-	UCHAR	Hidden;
-
-    USHORT  DtimPeriod;
-    USHORT  CapabilityInfo;
-
-    USHORT  CfpCount;
-    USHORT  CfpPeriod;
-    USHORT  CfpMaxDuration;
-    USHORT  CfpDurRemaining;
-    UCHAR   SsidLen;
-    CHAR    Ssid[MAX_LEN_OF_SSID];
-
-    ULONG   LastBeaconRxTime; // OS's timestamp
-
-	BOOLEAN	bSES;
-
-	// New for WPA2
-	CIPHER_SUITE					WPA;			// AP announced WPA cipher suite
-	CIPHER_SUITE					WPA2;			// AP announced WPA2 cipher suite
-
-	// New for microsoft WPA support
-	NDIS_802_11_FIXED_IEs	FixIEs;
-	NDIS_802_11_AUTHENTICATION_MODE	AuthModeAux;	// Addition mode for WPA2 / WPA capable AP
-	NDIS_802_11_AUTHENTICATION_MODE	AuthMode;
-	NDIS_802_11_WEP_STATUS	WepStatus;				// Unicast Encryption Algorithm extract from VAR_IE
-	USHORT					VarIELen;				// Length of next VIE include EID & Length
-	UCHAR					VarIEs[MAX_VIE_LEN];
-
-	// CCX Ckip information
-    UCHAR   CkipFlag;
-
-	// CCX 2 TSF
-	UCHAR	PTSF[4];		// Parent TSF
-	UCHAR	TTSF[8];		// Target TSF
-
-    // 802.11e d9, and WMM
-	EDCA_PARM           EdcaParm;
-	QOS_CAPABILITY_PARM QosCapability;
-	QBSS_LOAD_PARM      QbssLoad;
-#ifdef CONFIG_STA_SUPPORT
-    WPA_IE_     WpaIE;
-    WPA_IE_     RsnIE;
-#ifdef EXT_BUILD_CHANNEL_LIST
-	UCHAR		CountryString[3];
-	BOOLEAN		bHasCountryIE;
-#endif // EXT_BUILD_CHANNEL_LIST //
-#endif // CONFIG_STA_SUPPORT //
-} BSS_ENTRY, *PBSS_ENTRY;
-
-typedef struct {
-    UCHAR           BssNr;
-    UCHAR           BssOverlapNr;
-    BSS_ENTRY       BssEntry[MAX_LEN_OF_BSS_TABLE];
-} BSS_TABLE, *PBSS_TABLE;
-
-
-typedef struct _MLME_QUEUE_ELEM {
-    ULONG             Machine;
-    ULONG             MsgType;
-    ULONG             MsgLen;
-    UCHAR             Msg[MGMT_DMA_BUFFER_SIZE];
-    LARGE_INTEGER     TimeStamp;
-    UCHAR             Rssi0;
-    UCHAR             Rssi1;
-    UCHAR             Rssi2;
-    UCHAR             Signal;
-    UCHAR             Channel;
-    UCHAR             Wcid;
-    BOOLEAN           Occupied;
-} MLME_QUEUE_ELEM, *PMLME_QUEUE_ELEM;
-
-typedef struct _MLME_QUEUE {
-    ULONG             Num;
-    ULONG             Head;
-    ULONG             Tail;
-    NDIS_SPIN_LOCK   Lock;
-    MLME_QUEUE_ELEM  Entry[MAX_LEN_OF_MLME_QUEUE];
-} MLME_QUEUE, *PMLME_QUEUE;
-
-typedef VOID (*STATE_MACHINE_FUNC)(VOID *Adaptor, MLME_QUEUE_ELEM *Elem);
-
-typedef struct _STATE_MACHINE {
-    ULONG                           Base;
-    ULONG                           NrState;
-    ULONG                           NrMsg;
-    ULONG                           CurrState;
-    STATE_MACHINE_FUNC             *TransFunc;
-} STATE_MACHINE, *PSTATE_MACHINE;
-
-
-// MLME AUX data structure that hold temporarliy settings during a connection attempt.
-// Once this attemp succeeds, all settings will be copy to pAd->StaActive.
-// A connection attempt (user set OID, roaming, CCX fast roaming,..) consists of
-// several steps (JOIN, AUTH, ASSOC or REASSOC) and may fail at any step. We purposely
-// separate this under-trial settings away from pAd->StaActive so that once
-// this new attempt failed, driver can auto-recover back to the active settings.
-typedef struct _MLME_AUX {
-    UCHAR               BssType;
-    UCHAR               Ssid[MAX_LEN_OF_SSID];
-    UCHAR               SsidLen;
-    UCHAR               Bssid[MAC_ADDR_LEN];
-	UCHAR				AutoReconnectSsid[MAX_LEN_OF_SSID];
-	UCHAR				AutoReconnectSsidLen;
-    USHORT              Alg;
-    UCHAR               ScanType;
-    UCHAR               Channel;
-	UCHAR               CentralChannel;
-    USHORT              Aid;
-    USHORT              CapabilityInfo;
-    USHORT              BeaconPeriod;
-    USHORT              CfpMaxDuration;
-    USHORT              CfpPeriod;
-    USHORT              AtimWin;
-
-	// Copy supported rate from desired AP's beacon. We are trying to match
-	// AP's supported and extended rate settings.
-	UCHAR		        SupRate[MAX_LEN_OF_SUPPORTED_RATES];
-	UCHAR		        ExtRate[MAX_LEN_OF_SUPPORTED_RATES];
-	UCHAR		        SupRateLen;
-	UCHAR		        ExtRateLen;
-	HT_CAPABILITY_IE		HtCapability;
-	UCHAR		        	HtCapabilityLen;
-	ADD_HT_INFO_IE		AddHtInfo;	// AP might use this additional ht info IE
-	UCHAR			NewExtChannelOffset;
-	//RT_HT_CAPABILITY	SupportedHtPhy;
-
-    // new for QOS
-    QOS_CAPABILITY_PARM APQosCapability;    // QOS capability of the current associated AP
-    EDCA_PARM           APEdcaParm;         // EDCA parameters of the current associated AP
-    QBSS_LOAD_PARM      APQbssLoad;         // QBSS load of the current associated AP
-
-    // new to keep Ralink specific feature
-    ULONG               APRalinkIe;
-
-    BSS_TABLE           SsidBssTab;     // AP list for the same SSID
-    BSS_TABLE           RoamTab;        // AP list eligible for roaming
-    ULONG               BssIdx;
-    ULONG               RoamIdx;
-
-	BOOLEAN				CurrReqIsFromNdis;
-
-    RALINK_TIMER_STRUCT BeaconTimer, ScanTimer;
-    RALINK_TIMER_STRUCT AuthTimer;
-    RALINK_TIMER_STRUCT AssocTimer, ReassocTimer, DisassocTimer;
-} MLME_AUX, *PMLME_AUX;
-
-typedef struct _MLME_ADDBA_REQ_STRUCT{
-	UCHAR   Wcid;	//
-	UCHAR   pAddr[MAC_ADDR_LEN];
-	UCHAR   BaBufSize;
-	USHORT	TimeOutValue;
-	UCHAR   TID;
-	UCHAR   Token;
-	USHORT	BaStartSeq;
-} MLME_ADDBA_REQ_STRUCT, *PMLME_ADDBA_REQ_STRUCT;
-
-
-typedef struct _MLME_DELBA_REQ_STRUCT{
-	UCHAR   Wcid;	//
-	UCHAR     Addr[MAC_ADDR_LEN];
-	UCHAR   TID;
-	UCHAR	Initiator;
-} MLME_DELBA_REQ_STRUCT, *PMLME_DELBA_REQ_STRUCT;
-
-// assoc struct is equal to reassoc
-typedef struct _MLME_ASSOC_REQ_STRUCT{
-    UCHAR     Addr[MAC_ADDR_LEN];
-    USHORT    CapabilityInfo;
-    USHORT    ListenIntv;
-    ULONG     Timeout;
-} MLME_ASSOC_REQ_STRUCT, *PMLME_ASSOC_REQ_STRUCT, MLME_REASSOC_REQ_STRUCT, *PMLME_REASSOC_REQ_STRUCT;
-
-typedef struct _MLME_DISASSOC_REQ_STRUCT{
-    UCHAR     Addr[MAC_ADDR_LEN];
-    USHORT    Reason;
-} MLME_DISASSOC_REQ_STRUCT, *PMLME_DISASSOC_REQ_STRUCT;
-
-typedef struct _MLME_AUTH_REQ_STRUCT {
-    UCHAR        Addr[MAC_ADDR_LEN];
-    USHORT       Alg;
-    ULONG        Timeout;
-} MLME_AUTH_REQ_STRUCT, *PMLME_AUTH_REQ_STRUCT;
-
-typedef struct _MLME_DEAUTH_REQ_STRUCT {
-    UCHAR        Addr[MAC_ADDR_LEN];
-    USHORT       Reason;
-} MLME_DEAUTH_REQ_STRUCT, *PMLME_DEAUTH_REQ_STRUCT;
-
-typedef struct {
-    ULONG      BssIdx;
-} MLME_JOIN_REQ_STRUCT;
-
-typedef struct _MLME_SCAN_REQ_STRUCT {
-    UCHAR      Bssid[MAC_ADDR_LEN];
-    UCHAR      BssType;
-    UCHAR      ScanType;
-    UCHAR      SsidLen;
-    CHAR       Ssid[MAX_LEN_OF_SSID];
-} MLME_SCAN_REQ_STRUCT, *PMLME_SCAN_REQ_STRUCT;
-
-typedef struct _MLME_START_REQ_STRUCT {
-    CHAR        Ssid[MAX_LEN_OF_SSID];
-    UCHAR       SsidLen;
-} MLME_START_REQ_STRUCT, *PMLME_START_REQ_STRUCT;
-
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-// structure for DLS
-typedef struct _RT_802_11_DLS {
-	USHORT						TimeOut;		// Use to time out while slience, unit: second , set by UI
-	USHORT						CountDownTimer;	// Use to time out while slience,unit: second , used by driver only
-	NDIS_802_11_MAC_ADDRESS		MacAddr;		// set by UI
-	UCHAR						Status;			// 0: none , 1: wait STAkey, 2: finish DLS setup , set by driver only
-	BOOLEAN						Valid;			// 1: valid , 0: invalid , set by UI, use to setup or tear down DLS link
-	RALINK_TIMER_STRUCT			Timer;			// Use to time out while handshake
-	USHORT						Sequence;
-	USHORT						MacTabMatchWCID;	// ASIC
-	BOOLEAN						bHTCap;
-	PVOID						pAd;
-} RT_802_11_DLS, *PRT_802_11_DLS;
-
-typedef struct _MLME_DLS_REQ_STRUCT {
-    PRT_802_11_DLS	pDLS;
-    USHORT			Reason;
-} MLME_DLS_REQ_STRUCT, *PMLME_DLS_REQ_STRUCT;
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
-typedef struct PACKED {
-    UCHAR   Eid;
-    UCHAR   Len;
-    CHAR   Octet[1];
-} EID_STRUCT,*PEID_STRUCT, BEACON_EID_STRUCT, *PBEACON_EID_STRUCT;
-
-typedef struct PACKED _RTMP_TX_RATE_SWITCH
-{
-	UCHAR   ItemNo;
-#ifdef RT_BIG_ENDIAN
-	UCHAR	Rsv2:2;
-	UCHAR	Mode:2;
-	UCHAR	Rsv1:1;
-	UCHAR	BW:1;
-	UCHAR	ShortGI:1;
-	UCHAR	STBC:1;
-#else
-	UCHAR	STBC:1;
-	UCHAR	ShortGI:1;
-	UCHAR	BW:1;
-	UCHAR	Rsv1:1;
-	UCHAR	Mode:2;
-	UCHAR	Rsv2:2;
-#endif
-	UCHAR   CurrMCS;
-	UCHAR   TrainUp;
-	UCHAR   TrainDown;
-} RRTMP_TX_RATE_SWITCH, *PRTMP_TX_RATE_SWITCH;
-
-// ========================== AP mlme.h ===============================
-#define TBTT_PRELOAD_TIME       384        // usec. LomgPreamble + 24-byte at 1Mbps
-#define DEFAULT_DTIM_PERIOD     1
-
-// weighting factor to calculate Channel quality, total should be 100%
-//#define RSSI_WEIGHTING                   0
-//#define TX_WEIGHTING                     40
-//#define RX_WEIGHTING                     60
-
-#define MAC_TABLE_AGEOUT_TIME			300			// unit: sec
-#define MAC_TABLE_ASSOC_TIMEOUT			5			// unit: sec
-#define MAC_TABLE_FULL(Tab)				((Tab).size == MAX_LEN_OF_MAC_TABLE)
-
-// AP shall drop the sta if contine Tx fail count reach it.
-#define MAC_ENTRY_LIFE_CHECK_CNT		20			// packet cnt.
-
-// Value domain of pMacEntry->Sst
-typedef enum _Sst {
-    SST_NOT_AUTH,   // 0: equivalent to IEEE 802.11/1999 state 1
-    SST_AUTH,       // 1: equivalent to IEEE 802.11/1999 state 2
-    SST_ASSOC       // 2: equivalent to IEEE 802.11/1999 state 3
-} SST;
-
-// value domain of pMacEntry->AuthState
-typedef enum _AuthState {
-    AS_NOT_AUTH,
-    AS_AUTH_OPEN,       // STA has been authenticated using OPEN SYSTEM
-    AS_AUTH_KEY,        // STA has been authenticated using SHARED KEY
-    AS_AUTHENTICATING   // STA is waiting for AUTH seq#3 using SHARED KEY
-} AUTH_STATE;
-
-//for-wpa value domain of pMacEntry->WpaState  802.1i D3   p.114
-typedef enum _ApWpaState {
-    AS_NOTUSE,              // 0
-    AS_DISCONNECT,          // 1
-    AS_DISCONNECTED,        // 2
-    AS_INITIALIZE,          // 3
-    AS_AUTHENTICATION,      // 4
-    AS_AUTHENTICATION2,     // 5
-    AS_INITPMK,             // 6
-    AS_INITPSK,             // 7
-    AS_PTKSTART,            // 8
-    AS_PTKINIT_NEGOTIATING, // 9
-    AS_PTKINITDONE,         // 10
-    AS_UPDATEKEYS,          // 11
-    AS_INTEGRITY_FAILURE,   // 12
-    AS_KEYUPDATE,           // 13
-} AP_WPA_STATE;
-
-// for-wpa value domain of pMacEntry->WpaState  802.1i D3   p.114
-typedef enum _GTKState {
-    REKEY_NEGOTIATING,
-    REKEY_ESTABLISHED,
-    KEYERROR,
-} GTK_STATE;
-
-//  for-wpa  value domain of pMacEntry->WpaState  802.1i D3   p.114
-typedef enum _WpaGTKState {
-    SETKEYS,
-    SETKEYS_DONE,
-} WPA_GTK_STATE;
-// ====================== end of AP mlme.h ============================
-
-
-#endif	// MLME_H__
+#include "../rt2860/mlme.h"
diff --git a/drivers/staging/rt2870/netif_block.h b/drivers/staging/rt2870/netif_block.h
deleted file mode 100644
index 6e5151c4109..00000000000
--- a/drivers/staging/rt2870/netif_block.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-#ifndef __NET_IF_BLOCK_H__
-#define __NET_IF_BLOCK_H__
-
-//#include <linux/device.h>
-#include "link_list.h"
-#include "rtmp.h"
-
-#define FREE_NETIF_POOL_SIZE 32
-
-typedef struct _NETIF_ENTRY
-{
-	struct _NETIF_ENTRY *pNext;
-	PNET_DEV pNetDev;
-} NETIF_ENTRY, *PNETIF_ENTRY;
-
-void initblockQueueTab(
-	IN PRTMP_ADAPTER pAd);
-
-BOOLEAN blockNetIf(
-	IN PBLOCK_QUEUE_ENTRY pBlockQueueEntry,
-	IN PNET_DEV pNetDev);
-
-VOID releaseNetIf(
-	IN PBLOCK_QUEUE_ENTRY pBlockQueueEntry);
-
-VOID StopNetIfQueue(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR QueIdx,
-	IN PNDIS_PACKET pPacket);
-#endif // __NET_IF_BLOCK_H__
-
diff --git a/drivers/staging/rt2870/oid.h b/drivers/staging/rt2870/oid.h
index d788db6b626..1223d81bfc6 100644
--- a/drivers/staging/rt2870/oid.h
+++ b/drivers/staging/rt2870/oid.h
@@ -1,1091 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	oid.h
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Name		Date			Modification logs
-*/
-#ifndef _OID_H_
-#define _OID_H_
-
-#define TRUE				1
-#define FALSE				0
-//
-// IEEE 802.11 Structures and definitions
-//
-#define MAX_TX_POWER_LEVEL              100   /* mW */
-#define MAX_RSSI_TRIGGER                -10    /* dBm */
-#define MIN_RSSI_TRIGGER                -200   /* dBm */
-#define MAX_FRAG_THRESHOLD              2346  /* byte count */
-#define MIN_FRAG_THRESHOLD              256   /* byte count */
-#define MAX_RTS_THRESHOLD               2347  /* byte count */
-
-// new types for Media Specific Indications
-// Extension channel offset
-#define EXTCHA_NONE			0
-#define EXTCHA_ABOVE		0x1
-#define EXTCHA_BELOW		0x3
-
-// BW
-#define BAND_WIDTH_20		0
-#define BAND_WIDTH_40		1
-#define BAND_WIDTH_BOTH		2
-#define BAND_WIDTH_10		3	// 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field.
-// SHORTGI
-#define GAP_INTERVAL_400	1	// only support in HT mode
-#define GAP_INTERVAL_800	0
-#define GAP_INTERVAL_BOTH	2
-
-#define NdisMediaStateConnected			1
-#define NdisMediaStateDisconnected		0
-
-#define NDIS_802_11_LENGTH_SSID         32
-#define NDIS_802_11_LENGTH_RATES        8
-#define NDIS_802_11_LENGTH_RATES_EX     16
-#define MAC_ADDR_LENGTH                 6
-#define MAX_NUM_OF_CHS					49 // 14 channels @2.4G +  12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL terminationc
-#define MAX_NUMBER_OF_EVENT				10  // entry # in EVENT table
-#define MAX_NUMBER_OF_MAC				32 // if MAX_MBSSID_NUM is 8, this value can't be larger than 211
-#define MAX_NUMBER_OF_ACL				64
-#define MAX_LENGTH_OF_SUPPORT_RATES		12    // 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
-#define MAX_NUMBER_OF_DLS_ENTRY			4
-
-#ifndef UNDER_CE
-// OID definition, since NDIS 5.0 didn't define these, we need to define for our own
-//#if _WIN32_WINNT<=0x0500
-
-#define OID_GEN_MACHINE_NAME               0x0001021A
-
-#ifdef RALINK_ATE
-#define RT_QUERY_ATE_TXDONE_COUNT			0x0401
-#endif // RALINK_ATE //
-#define RT_QUERY_SIGNAL_CONTEXT				0x0402
-#define RT_SET_IAPP_PID                 	0x0404
-#define RT_SET_APD_PID						0x0405
-#define RT_SET_DEL_MAC_ENTRY				0x0406
-
-//
-// IEEE 802.11 OIDs
-//
-#define	OID_GET_SET_TOGGLE			0x8000
-
-#define	OID_802_11_NETWORK_TYPES_SUPPORTED			0x0103
-#define	OID_802_11_NETWORK_TYPE_IN_USE				0x0104
-#define	OID_802_11_RSSI_TRIGGER						0x0107
-#define	RT_OID_802_11_RSSI							0x0108 //rt2860	only , kathy
-#define	RT_OID_802_11_RSSI_1						0x0109 //rt2860	only , kathy
-#define	RT_OID_802_11_RSSI_2						0x010A //rt2860	only , kathy
-#define	OID_802_11_NUMBER_OF_ANTENNAS				0x010B
-#define	OID_802_11_RX_ANTENNA_SELECTED				0x010C
-#define	OID_802_11_TX_ANTENNA_SELECTED				0x010D
-#define	OID_802_11_SUPPORTED_RATES					0x010E
-#define	OID_802_11_ADD_WEP							0x0112
-#define	OID_802_11_REMOVE_WEP						0x0113
-#define	OID_802_11_DISASSOCIATE						0x0114
-#define	OID_802_11_PRIVACY_FILTER					0x0118
-#define	OID_802_11_ASSOCIATION_INFORMATION			0x011E
-#define	OID_802_11_TEST								0x011F
-#define	RT_OID_802_11_COUNTRY_REGION				0x0507
-#define	OID_802_11_BSSID_LIST_SCAN					0x0508
-#define	OID_802_11_SSID								0x0509
-#define	OID_802_11_BSSID							0x050A
-#define	RT_OID_802_11_RADIO							0x050B
-#define	RT_OID_802_11_PHY_MODE						0x050C
-#define	RT_OID_802_11_STA_CONFIG					0x050D
-#define	OID_802_11_DESIRED_RATES					0x050E
-#define	RT_OID_802_11_PREAMBLE						0x050F
-#define	OID_802_11_WEP_STATUS						0x0510
-#define	OID_802_11_AUTHENTICATION_MODE				0x0511
-#define	OID_802_11_INFRASTRUCTURE_MODE				0x0512
-#define	RT_OID_802_11_RESET_COUNTERS				0x0513
-#define	OID_802_11_RTS_THRESHOLD					0x0514
-#define	OID_802_11_FRAGMENTATION_THRESHOLD			0x0515
-#define	OID_802_11_POWER_MODE						0x0516
-#define	OID_802_11_TX_POWER_LEVEL					0x0517
-#define	RT_OID_802_11_ADD_WPA						0x0518
-#define	OID_802_11_REMOVE_KEY						0x0519
-#define	OID_802_11_ADD_KEY							0x0520
-#define	OID_802_11_CONFIGURATION					0x0521
-#define	OID_802_11_TX_PACKET_BURST					0x0522
-#define	RT_OID_802_11_QUERY_NOISE_LEVEL				0x0523
-#define	RT_OID_802_11_EXTRA_INFO					0x0524
-#ifdef	DBG
-#define	RT_OID_802_11_HARDWARE_REGISTER				0x0525
-#endif
-#define OID_802_11_ENCRYPTION_STATUS            OID_802_11_WEP_STATUS
-#define OID_802_11_DEAUTHENTICATION                 0x0526
-#define OID_802_11_DROP_UNENCRYPTED                 0x0527
-#define OID_802_11_MIC_FAILURE_REPORT_FRAME         0x0528
-
-// For 802.1x daemin using to require current driver configuration
-#define OID_802_11_RADIUS_QUERY_SETTING				0x0540
-
-#define	RT_OID_DEVICE_NAME							0x0607
-#define	RT_OID_VERSION_INFO							0x0608
-#define	OID_802_11_BSSID_LIST						0x0609
-#define	OID_802_3_CURRENT_ADDRESS					0x060A
-#define	OID_GEN_MEDIA_CONNECT_STATUS				0x060B
-#define	RT_OID_802_11_QUERY_LINK_STATUS				0x060C
-#define	OID_802_11_RSSI								0x060D
-#define	OID_802_11_STATISTICS						0x060E
-#define	OID_GEN_RCV_OK								0x060F
-#define	OID_GEN_RCV_NO_BUFFER						0x0610
-#define	RT_OID_802_11_QUERY_EEPROM_VERSION			0x0611
-#define	RT_OID_802_11_QUERY_FIRMWARE_VERSION		0x0612
-#define	RT_OID_802_11_QUERY_LAST_RX_RATE			0x0613
-#define	RT_OID_802_11_TX_POWER_LEVEL_1				0x0614
-#define	RT_OID_802_11_QUERY_PIDVID					0x0615
-//for WPA_SUPPLICANT_SUPPORT
-#define OID_SET_COUNTERMEASURES                     0x0616
-#define OID_802_11_SET_IEEE8021X                    0x0617
-#define OID_802_11_SET_IEEE8021X_REQUIRE_KEY        0x0618
-#define OID_802_11_PMKID                            0x0620
-#define RT_OID_WPA_SUPPLICANT_SUPPORT               0x0621
-#define RT_OID_WE_VERSION_COMPILED                  0x0622
-#define RT_OID_NEW_DRIVER                           0x0623
-
-
-//rt2860 , kathy
-#define	RT_OID_802_11_SNR_0							0x0630
-#define	RT_OID_802_11_SNR_1							0x0631
-#define	RT_OID_802_11_QUERY_LAST_TX_RATE			0x0632
-#define	RT_OID_802_11_QUERY_HT_PHYMODE				0x0633
-#define	RT_OID_802_11_SET_HT_PHYMODE				0x0634
-#define	OID_802_11_RELOAD_DEFAULTS					0x0635
-#define	RT_OID_802_11_QUERY_APSD_SETTING			0x0636
-#define	RT_OID_802_11_SET_APSD_SETTING				0x0637
-#define	RT_OID_802_11_QUERY_APSD_PSM				0x0638
-#define	RT_OID_802_11_SET_APSD_PSM					0x0639
-#define	RT_OID_802_11_QUERY_DLS						0x063A
-#define	RT_OID_802_11_SET_DLS						0x063B
-#define	RT_OID_802_11_QUERY_DLS_PARAM				0x063C
-#define	RT_OID_802_11_SET_DLS_PARAM					0x063D
-#define RT_OID_802_11_QUERY_WMM              		0x063E
-#define RT_OID_802_11_SET_WMM      					0x063F
-#define RT_OID_802_11_QUERY_IMME_BA_CAP				0x0640
-#define RT_OID_802_11_SET_IMME_BA_CAP				0x0641
-#define RT_OID_802_11_QUERY_BATABLE					0x0642
-#define RT_OID_802_11_ADD_IMME_BA					0x0643
-#define RT_OID_802_11_TEAR_IMME_BA					0x0644
-#define RT_OID_DRIVER_DEVICE_NAME                   0x0645
-#define RT_OID_802_11_QUERY_DAT_HT_PHYMODE          0x0646
-#define RT_OID_QUERY_MULTIPLE_CARD_SUPPORT          0x0647
-
-// Ralink defined OIDs
-// Dennis Lee move to platform specific
-
-#define	RT_OID_802_11_BSSID					  (OID_GET_SET_TOGGLE |	OID_802_11_BSSID)
-#define	RT_OID_802_11_SSID					  (OID_GET_SET_TOGGLE |	OID_802_11_SSID)
-#define	RT_OID_802_11_INFRASTRUCTURE_MODE	  (OID_GET_SET_TOGGLE |	OID_802_11_INFRASTRUCTURE_MODE)
-#define	RT_OID_802_11_ADD_WEP				  (OID_GET_SET_TOGGLE |	OID_802_11_ADD_WEP)
-#define	RT_OID_802_11_ADD_KEY				  (OID_GET_SET_TOGGLE |	OID_802_11_ADD_KEY)
-#define	RT_OID_802_11_REMOVE_WEP			  (OID_GET_SET_TOGGLE |	OID_802_11_REMOVE_WEP)
-#define	RT_OID_802_11_REMOVE_KEY			  (OID_GET_SET_TOGGLE |	OID_802_11_REMOVE_KEY)
-#define	RT_OID_802_11_DISASSOCIATE			  (OID_GET_SET_TOGGLE |	OID_802_11_DISASSOCIATE)
-#define	RT_OID_802_11_AUTHENTICATION_MODE	  (OID_GET_SET_TOGGLE |	OID_802_11_AUTHENTICATION_MODE)
-#define	RT_OID_802_11_PRIVACY_FILTER		  (OID_GET_SET_TOGGLE |	OID_802_11_PRIVACY_FILTER)
-#define	RT_OID_802_11_BSSID_LIST_SCAN		  (OID_GET_SET_TOGGLE |	OID_802_11_BSSID_LIST_SCAN)
-#define	RT_OID_802_11_WEP_STATUS			  (OID_GET_SET_TOGGLE |	OID_802_11_WEP_STATUS)
-#define	RT_OID_802_11_RELOAD_DEFAULTS		  (OID_GET_SET_TOGGLE |	OID_802_11_RELOAD_DEFAULTS)
-#define	RT_OID_802_11_NETWORK_TYPE_IN_USE	  (OID_GET_SET_TOGGLE |	OID_802_11_NETWORK_TYPE_IN_USE)
-#define	RT_OID_802_11_TX_POWER_LEVEL		  (OID_GET_SET_TOGGLE |	OID_802_11_TX_POWER_LEVEL)
-#define	RT_OID_802_11_RSSI_TRIGGER			  (OID_GET_SET_TOGGLE |	OID_802_11_RSSI_TRIGGER)
-#define	RT_OID_802_11_FRAGMENTATION_THRESHOLD (OID_GET_SET_TOGGLE |	OID_802_11_FRAGMENTATION_THRESHOLD)
-#define	RT_OID_802_11_RTS_THRESHOLD			  (OID_GET_SET_TOGGLE |	OID_802_11_RTS_THRESHOLD)
-#define	RT_OID_802_11_RX_ANTENNA_SELECTED	  (OID_GET_SET_TOGGLE |	OID_802_11_RX_ANTENNA_SELECTED)
-#define	RT_OID_802_11_TX_ANTENNA_SELECTED	  (OID_GET_SET_TOGGLE |	OID_802_11_TX_ANTENNA_SELECTED)
-#define	RT_OID_802_11_SUPPORTED_RATES		  (OID_GET_SET_TOGGLE |	OID_802_11_SUPPORTED_RATES)
-#define	RT_OID_802_11_DESIRED_RATES			  (OID_GET_SET_TOGGLE |	OID_802_11_DESIRED_RATES)
-#define	RT_OID_802_11_CONFIGURATION			  (OID_GET_SET_TOGGLE |	OID_802_11_CONFIGURATION)
-#define	RT_OID_802_11_POWER_MODE			  (OID_GET_SET_TOGGLE |	OID_802_11_POWER_MODE)
-
-typedef enum _NDIS_802_11_STATUS_TYPE
-{
-    Ndis802_11StatusType_Authentication,
-    Ndis802_11StatusType_MediaStreamMode,
-    Ndis802_11StatusType_PMKID_CandidateList,
-    Ndis802_11StatusTypeMax    // not a real type, defined as an upper bound
-} NDIS_802_11_STATUS_TYPE, *PNDIS_802_11_STATUS_TYPE;
-
-typedef UCHAR   NDIS_802_11_MAC_ADDRESS[6];
-
-typedef struct _NDIS_802_11_STATUS_INDICATION
-{
-    NDIS_802_11_STATUS_TYPE StatusType;
-} NDIS_802_11_STATUS_INDICATION, *PNDIS_802_11_STATUS_INDICATION;
-
-// mask for authentication/integrity fields
-#define NDIS_802_11_AUTH_REQUEST_AUTH_FIELDS        0x0f
-
-#define NDIS_802_11_AUTH_REQUEST_REAUTH             0x01
-#define NDIS_802_11_AUTH_REQUEST_KEYUPDATE          0x02
-#define NDIS_802_11_AUTH_REQUEST_PAIRWISE_ERROR     0x06
-#define NDIS_802_11_AUTH_REQUEST_GROUP_ERROR        0x0E
-
-typedef struct _NDIS_802_11_AUTHENTICATION_REQUEST
-{
-    ULONG Length;            // Length of structure
-    NDIS_802_11_MAC_ADDRESS Bssid;
-    ULONG Flags;
-} NDIS_802_11_AUTHENTICATION_REQUEST, *PNDIS_802_11_AUTHENTICATION_REQUEST;
-
-//Added new types for PMKID Candidate lists.
-typedef struct _PMKID_CANDIDATE {
-    NDIS_802_11_MAC_ADDRESS BSSID;
-    ULONG Flags;
-} PMKID_CANDIDATE, *PPMKID_CANDIDATE;
-
-typedef struct _NDIS_802_11_PMKID_CANDIDATE_LIST
-{
-    ULONG Version;       // Version of the structure
-    ULONG NumCandidates; // No. of pmkid candidates
-    PMKID_CANDIDATE CandidateList[1];
-} NDIS_802_11_PMKID_CANDIDATE_LIST, *PNDIS_802_11_PMKID_CANDIDATE_LIST;
-
-//Flags for PMKID Candidate list structure
-#define NDIS_802_11_PMKID_CANDIDATE_PREAUTH_ENABLED	0x01
-
-// Added new types for OFDM 5G and 2.4G
-typedef enum _NDIS_802_11_NETWORK_TYPE
-{
-   Ndis802_11FH,
-   Ndis802_11DS,
-    Ndis802_11OFDM5,
-    Ndis802_11OFDM5_N,
-    Ndis802_11OFDM24,
-    Ndis802_11OFDM24_N,
-   Ndis802_11Automode,
-    Ndis802_11NetworkTypeMax    // not a real type, defined as an upper bound
-} NDIS_802_11_NETWORK_TYPE, *PNDIS_802_11_NETWORK_TYPE;
-
-typedef struct _NDIS_802_11_NETWORK_TYPE_LIST
-{
-    UINT                       NumberOfItems;  // in list below, at least 1
-   NDIS_802_11_NETWORK_TYPE    NetworkType [1];
-} NDIS_802_11_NETWORK_TYPE_LIST, *PNDIS_802_11_NETWORK_TYPE_LIST;
-
-typedef enum _NDIS_802_11_POWER_MODE
-{
-    Ndis802_11PowerModeCAM,
-    Ndis802_11PowerModeMAX_PSP,
-    Ndis802_11PowerModeFast_PSP,
-    Ndis802_11PowerModeLegacy_PSP,
-    Ndis802_11PowerModeMax      // not a real mode, defined as an upper bound
-} NDIS_802_11_POWER_MODE, *PNDIS_802_11_POWER_MODE;
-
-typedef ULONG   NDIS_802_11_TX_POWER_LEVEL; // in milliwatts
-
-//
-// Received Signal Strength Indication
-//
-typedef LONG    NDIS_802_11_RSSI;           // in dBm
-
-typedef struct _NDIS_802_11_CONFIGURATION_FH
-{
-   ULONG           Length;            // Length of structure
-   ULONG           HopPattern;        // As defined by 802.11, MSB set
-   ULONG           HopSet;            // to one if non-802.11
-   ULONG           DwellTime;         // units are Kusec
-} NDIS_802_11_CONFIGURATION_FH, *PNDIS_802_11_CONFIGURATION_FH;
-
-typedef struct _NDIS_802_11_CONFIGURATION
-{
-   ULONG                           Length;             // Length of structure
-   ULONG                           BeaconPeriod;       // units are Kusec
-   ULONG                           ATIMWindow;         // units are Kusec
-   ULONG                           DSConfig;           // Frequency, units are kHz
-   NDIS_802_11_CONFIGURATION_FH    FHConfig;
-} NDIS_802_11_CONFIGURATION, *PNDIS_802_11_CONFIGURATION;
-
-typedef struct _NDIS_802_11_STATISTICS
-{
-   ULONG           Length;             // Length of structure
-   LARGE_INTEGER   TransmittedFragmentCount;
-   LARGE_INTEGER   MulticastTransmittedFrameCount;
-   LARGE_INTEGER   FailedCount;
-   LARGE_INTEGER   RetryCount;
-   LARGE_INTEGER   MultipleRetryCount;
-   LARGE_INTEGER   RTSSuccessCount;
-   LARGE_INTEGER   RTSFailureCount;
-   LARGE_INTEGER   ACKFailureCount;
-   LARGE_INTEGER   FrameDuplicateCount;
-   LARGE_INTEGER   ReceivedFragmentCount;
-   LARGE_INTEGER   MulticastReceivedFrameCount;
-   LARGE_INTEGER   FCSErrorCount;
-   LARGE_INTEGER   TKIPLocalMICFailures;
-   LARGE_INTEGER   TKIPRemoteMICErrors;
-   LARGE_INTEGER   TKIPICVErrors;
-   LARGE_INTEGER   TKIPCounterMeasuresInvoked;
-   LARGE_INTEGER   TKIPReplays;
-   LARGE_INTEGER   CCMPFormatErrors;
-   LARGE_INTEGER   CCMPReplays;
-   LARGE_INTEGER   CCMPDecryptErrors;
-   LARGE_INTEGER   FourWayHandshakeFailures;
-} NDIS_802_11_STATISTICS, *PNDIS_802_11_STATISTICS;
-
-typedef  ULONG  NDIS_802_11_KEY_INDEX;
-typedef ULONGLONG   NDIS_802_11_KEY_RSC;
-
-#define MAX_RADIUS_SRV_NUM			2	  // 802.1x failover number
-
-typedef struct PACKED _RADIUS_SRV_INFO {
-	UINT32			radius_ip;
-	UINT32			radius_port;
-	UCHAR			radius_key[64];
-	UCHAR			radius_key_len;
-} RADIUS_SRV_INFO, *PRADIUS_SRV_INFO;
-
-typedef struct PACKED _RADIUS_KEY_INFO
-{
-	UCHAR			radius_srv_num;
-	RADIUS_SRV_INFO	radius_srv_info[MAX_RADIUS_SRV_NUM];
-	UCHAR			ieee8021xWEP;		 // dynamic WEP
-    UCHAR           key_index;
-    UCHAR           key_length;          // length of key in bytes
-    UCHAR           key_material[13];
-} RADIUS_KEY_INFO, *PRADIUS_KEY_INFO;
-
-// It's used by 802.1x daemon to require relative configuration
-typedef struct PACKED _RADIUS_CONF
-{
-    UINT32          Length;             // Length of this structure
-    UCHAR			mbss_num;			// indicate multiple BSS number
-	UINT32			own_ip_addr;
-	UINT32			retry_interval;
-	UINT32			session_timeout_interval;
-	UCHAR			EAPifname[IFNAMSIZ];
-	UCHAR			EAPifname_len;
-	UCHAR 			PreAuthifname[IFNAMSIZ];
-	UCHAR			PreAuthifname_len;
-	RADIUS_KEY_INFO	RadiusInfo[8/*MAX_MBSSID_NUM*/];
-} RADIUS_CONF, *PRADIUS_CONF;
-
-
-
-#ifdef CONFIG_STA_SUPPORT
-// Key mapping keys require a BSSID
-typedef struct _NDIS_802_11_KEY
-{
-    UINT           Length;             // Length of this structure
-    UINT           KeyIndex;
-    UINT           KeyLength;          // length of key in bytes
-    NDIS_802_11_MAC_ADDRESS BSSID;
-    NDIS_802_11_KEY_RSC KeyRSC;
-    UCHAR           KeyMaterial[1];     // variable length depending on above field
-} NDIS_802_11_KEY, *PNDIS_802_11_KEY;
-#endif // CONFIG_STA_SUPPORT //
-
-typedef struct _NDIS_802_11_REMOVE_KEY
-{
-    UINT           Length;             // Length of this structure
-    UINT           KeyIndex;
-    NDIS_802_11_MAC_ADDRESS BSSID;
-} NDIS_802_11_REMOVE_KEY, *PNDIS_802_11_REMOVE_KEY;
-
-typedef struct _NDIS_802_11_WEP
-{
-   UINT     Length;        // Length of this structure
-   UINT     KeyIndex;           // 0 is the per-client key, 1-N are the
-                                        // global keys
-   UINT     KeyLength;     // length of key in bytes
-   UCHAR     KeyMaterial[1];// variable length depending on above field
-} NDIS_802_11_WEP, *PNDIS_802_11_WEP;
-
-
-typedef enum _NDIS_802_11_NETWORK_INFRASTRUCTURE
-{
-   Ndis802_11IBSS,
-   Ndis802_11Infrastructure,
-   Ndis802_11AutoUnknown,
-   Ndis802_11Monitor,
-   Ndis802_11InfrastructureMax     // Not a real value, defined as upper bound
-} NDIS_802_11_NETWORK_INFRASTRUCTURE, *PNDIS_802_11_NETWORK_INFRASTRUCTURE;
-
-// Add new authentication modes
-typedef enum _NDIS_802_11_AUTHENTICATION_MODE
-{
-   Ndis802_11AuthModeOpen,
-   Ndis802_11AuthModeShared,
-   Ndis802_11AuthModeAutoSwitch,
-    Ndis802_11AuthModeWPA,
-    Ndis802_11AuthModeWPAPSK,
-    Ndis802_11AuthModeWPANone,
-   Ndis802_11AuthModeWPA2,
-   Ndis802_11AuthModeWPA2PSK,
-   	Ndis802_11AuthModeWPA1WPA2,
-	Ndis802_11AuthModeWPA1PSKWPA2PSK,
-   Ndis802_11AuthModeMax           // Not a real mode, defined as upper bound
-} NDIS_802_11_AUTHENTICATION_MODE, *PNDIS_802_11_AUTHENTICATION_MODE;
-
-typedef UCHAR   NDIS_802_11_RATES[NDIS_802_11_LENGTH_RATES];        // Set of 8 data rates
-typedef UCHAR   NDIS_802_11_RATES_EX[NDIS_802_11_LENGTH_RATES_EX];  // Set of 16 data rates
-
-typedef struct PACKED _NDIS_802_11_SSID
-{
-    UINT   SsidLength;         // length of SSID field below, in bytes;
-                                // this can be zero.
-    UCHAR   Ssid[NDIS_802_11_LENGTH_SSID];           // SSID information field
-} NDIS_802_11_SSID, *PNDIS_802_11_SSID;
-
-
-typedef struct PACKED _NDIS_WLAN_BSSID
-{
-   ULONG                               Length;     // Length of this structure
-   NDIS_802_11_MAC_ADDRESS             MacAddress; // BSSID
-   UCHAR                               Reserved[2];
-   NDIS_802_11_SSID                    Ssid;       // SSID
-   ULONG                               Privacy;    // WEP encryption requirement
-   NDIS_802_11_RSSI                    Rssi;       // receive signal strength in dBm
-   NDIS_802_11_NETWORK_TYPE            NetworkTypeInUse;
-   NDIS_802_11_CONFIGURATION           Configuration;
-   NDIS_802_11_NETWORK_INFRASTRUCTURE  InfrastructureMode;
-   NDIS_802_11_RATES                   SupportedRates;
-} NDIS_WLAN_BSSID, *PNDIS_WLAN_BSSID;
-
-typedef struct PACKED _NDIS_802_11_BSSID_LIST
-{
-   UINT           NumberOfItems;      // in list below, at least 1
-   NDIS_WLAN_BSSID Bssid[1];
-} NDIS_802_11_BSSID_LIST, *PNDIS_802_11_BSSID_LIST;
-
-// Added Capabilities, IELength and IEs for each BSSID
-typedef struct PACKED _NDIS_WLAN_BSSID_EX
-{
-    ULONG                               Length;             // Length of this structure
-    NDIS_802_11_MAC_ADDRESS             MacAddress;         // BSSID
-    UCHAR                               Reserved[2];
-    NDIS_802_11_SSID                    Ssid;               // SSID
-    UINT                                Privacy;            // WEP encryption requirement
-    NDIS_802_11_RSSI                    Rssi;               // receive signal
-                                                            // strength in dBm
-    NDIS_802_11_NETWORK_TYPE            NetworkTypeInUse;
-    NDIS_802_11_CONFIGURATION           Configuration;
-    NDIS_802_11_NETWORK_INFRASTRUCTURE  InfrastructureMode;
-    NDIS_802_11_RATES_EX                SupportedRates;
-    ULONG                               IELength;
-    UCHAR                               IEs[1];
-} NDIS_WLAN_BSSID_EX, *PNDIS_WLAN_BSSID_EX;
-
-typedef struct PACKED _NDIS_802_11_BSSID_LIST_EX
-{
-    UINT                   NumberOfItems;      // in list below, at least 1
-    NDIS_WLAN_BSSID_EX      Bssid[1];
-} NDIS_802_11_BSSID_LIST_EX, *PNDIS_802_11_BSSID_LIST_EX;
-
-typedef struct PACKED _NDIS_802_11_FIXED_IEs
-{
-    UCHAR Timestamp[8];
-    USHORT BeaconInterval;
-    USHORT Capabilities;
-} NDIS_802_11_FIXED_IEs, *PNDIS_802_11_FIXED_IEs;
-
-typedef struct _NDIS_802_11_VARIABLE_IEs
-{
-    UCHAR ElementID;
-    UCHAR Length;    // Number of bytes in data field
-    UCHAR data[1];
-} NDIS_802_11_VARIABLE_IEs, *PNDIS_802_11_VARIABLE_IEs;
-
-typedef  ULONG   NDIS_802_11_FRAGMENTATION_THRESHOLD;
-
-typedef  ULONG   NDIS_802_11_RTS_THRESHOLD;
-
-typedef  ULONG   NDIS_802_11_ANTENNA;
-
-typedef enum _NDIS_802_11_PRIVACY_FILTER
-{
-   Ndis802_11PrivFilterAcceptAll,
-   Ndis802_11PrivFilter8021xWEP
-} NDIS_802_11_PRIVACY_FILTER, *PNDIS_802_11_PRIVACY_FILTER;
-
-// Added new encryption types
-// Also aliased typedef to new name
-typedef enum _NDIS_802_11_WEP_STATUS
-{
-   Ndis802_11WEPEnabled,
-    Ndis802_11Encryption1Enabled = Ndis802_11WEPEnabled,
-   Ndis802_11WEPDisabled,
-    Ndis802_11EncryptionDisabled = Ndis802_11WEPDisabled,
-   Ndis802_11WEPKeyAbsent,
-    Ndis802_11Encryption1KeyAbsent = Ndis802_11WEPKeyAbsent,
-   Ndis802_11WEPNotSupported,
-    Ndis802_11EncryptionNotSupported = Ndis802_11WEPNotSupported,
-    Ndis802_11Encryption2Enabled,
-    Ndis802_11Encryption2KeyAbsent,
-    Ndis802_11Encryption3Enabled,
-    Ndis802_11Encryption3KeyAbsent,
-    Ndis802_11Encryption4Enabled,	// TKIP or AES mix
-    Ndis802_11Encryption4KeyAbsent,
-    Ndis802_11GroupWEP40Enabled,
-	Ndis802_11GroupWEP104Enabled,
-} NDIS_802_11_WEP_STATUS, *PNDIS_802_11_WEP_STATUS,
-  NDIS_802_11_ENCRYPTION_STATUS, *PNDIS_802_11_ENCRYPTION_STATUS;
-
-typedef enum _NDIS_802_11_RELOAD_DEFAULTS
-{
-   Ndis802_11ReloadWEPKeys
-} NDIS_802_11_RELOAD_DEFAULTS, *PNDIS_802_11_RELOAD_DEFAULTS;
-
-#define NDIS_802_11_AI_REQFI_CAPABILITIES      1
-#define NDIS_802_11_AI_REQFI_LISTENINTERVAL    2
-#define NDIS_802_11_AI_REQFI_CURRENTAPADDRESS  4
-
-#define NDIS_802_11_AI_RESFI_CAPABILITIES      1
-#define NDIS_802_11_AI_RESFI_STATUSCODE        2
-#define NDIS_802_11_AI_RESFI_ASSOCIATIONID     4
-
-typedef struct _NDIS_802_11_AI_REQFI
-{
-    USHORT Capabilities;
-    USHORT ListenInterval;
-    NDIS_802_11_MAC_ADDRESS  CurrentAPAddress;
-} NDIS_802_11_AI_REQFI, *PNDIS_802_11_AI_REQFI;
-
-typedef struct _NDIS_802_11_AI_RESFI
-{
-    USHORT Capabilities;
-    USHORT StatusCode;
-    USHORT AssociationId;
-} NDIS_802_11_AI_RESFI, *PNDIS_802_11_AI_RESFI;
-
-typedef struct _NDIS_802_11_ASSOCIATION_INFORMATION
-{
-    ULONG                   Length;
-    USHORT                  AvailableRequestFixedIEs;
-    NDIS_802_11_AI_REQFI    RequestFixedIEs;
-    ULONG                   RequestIELength;
-    ULONG                   OffsetRequestIEs;
-    USHORT                  AvailableResponseFixedIEs;
-    NDIS_802_11_AI_RESFI    ResponseFixedIEs;
-    ULONG                   ResponseIELength;
-    ULONG                   OffsetResponseIEs;
-} NDIS_802_11_ASSOCIATION_INFORMATION, *PNDIS_802_11_ASSOCIATION_INFORMATION;
-
-typedef struct _NDIS_802_11_AUTHENTICATION_EVENT
-{
-    NDIS_802_11_STATUS_INDICATION       Status;
-    NDIS_802_11_AUTHENTICATION_REQUEST  Request[1];
-} NDIS_802_11_AUTHENTICATION_EVENT, *PNDIS_802_11_AUTHENTICATION_EVENT;
-
-/*
-typedef struct _NDIS_802_11_TEST
-{
-    ULONG Length;
-    ULONG Type;
-    union
-    {
-        NDIS_802_11_AUTHENTICATION_EVENT AuthenticationEvent;
-        NDIS_802_11_RSSI RssiTrigger;
-    };
-} NDIS_802_11_TEST, *PNDIS_802_11_TEST;
- */
-
-// 802.11 Media stream constraints, associated with OID_802_11_MEDIA_STREAM_MODE
-typedef enum _NDIS_802_11_MEDIA_STREAM_MODE
-{
-    Ndis802_11MediaStreamOff,
-    Ndis802_11MediaStreamOn,
-} NDIS_802_11_MEDIA_STREAM_MODE, *PNDIS_802_11_MEDIA_STREAM_MODE;
-
-// PMKID Structures
-typedef UCHAR   NDIS_802_11_PMKID_VALUE[16];
-
-#ifdef CONFIG_STA_SUPPORT
-typedef struct _BSSID_INFO
-{
-    NDIS_802_11_MAC_ADDRESS BSSID;
-    NDIS_802_11_PMKID_VALUE PMKID;
-} BSSID_INFO, *PBSSID_INFO;
-
-typedef struct _NDIS_802_11_PMKID
-{
-    UINT    Length;
-    UINT    BSSIDInfoCount;
-    BSSID_INFO BSSIDInfo[1];
-} NDIS_802_11_PMKID, *PNDIS_802_11_PMKID;
-#endif // CONFIG_STA_SUPPORT //
-
-
-typedef struct _NDIS_802_11_AUTHENTICATION_ENCRYPTION
-{
-    NDIS_802_11_AUTHENTICATION_MODE AuthModeSupported;
-    NDIS_802_11_ENCRYPTION_STATUS EncryptStatusSupported;
-} NDIS_802_11_AUTHENTICATION_ENCRYPTION, *PNDIS_802_11_AUTHENTICATION_ENCRYPTION;
-
-typedef struct _NDIS_802_11_CAPABILITY
-{
-     ULONG Length;
-     ULONG Version;
-     ULONG NoOfPMKIDs;
-     ULONG NoOfAuthEncryptPairsSupported;
-     NDIS_802_11_AUTHENTICATION_ENCRYPTION AuthenticationEncryptionSupported[1];
-} NDIS_802_11_CAPABILITY, *PNDIS_802_11_CAPABILITY;
-
-//#endif //of WIN 2k
-#endif //UNDER_CE
-
-#if WIRELESS_EXT <= 11
-#ifndef SIOCDEVPRIVATE
-#define SIOCDEVPRIVATE                              0x8BE0
-#endif
-#define SIOCIWFIRSTPRIV								SIOCDEVPRIVATE
-#endif
-
-#ifdef CONFIG_STA_SUPPORT
-#define RTPRIV_IOCTL_SET							(SIOCIWFIRSTPRIV + 0x02)
-
-#ifdef DBG
-#define RTPRIV_IOCTL_BBP                            (SIOCIWFIRSTPRIV + 0x03)
-#define RTPRIV_IOCTL_MAC                            (SIOCIWFIRSTPRIV + 0x05)
-#define RTPRIV_IOCTL_E2P                            (SIOCIWFIRSTPRIV + 0x07)
-#endif
-
-#ifdef RALINK_ATE
-#ifdef RALINK_28xx_QA
-#define RTPRIV_IOCTL_ATE							(SIOCIWFIRSTPRIV + 0x08)
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
-#define RTPRIV_IOCTL_STATISTICS                     (SIOCIWFIRSTPRIV + 0x09)
-#define RTPRIV_IOCTL_ADD_PMKID_CACHE                (SIOCIWFIRSTPRIV + 0x0A)
-#define RTPRIV_IOCTL_RADIUS_DATA                    (SIOCIWFIRSTPRIV + 0x0C)
-#define RTPRIV_IOCTL_GSITESURVEY					(SIOCIWFIRSTPRIV + 0x0D)
-#define RT_PRIV_IOCTL								(SIOCIWFIRSTPRIV + 0x0E) // Sync. with RT61 (for wpa_supplicant)
-#define RTPRIV_IOCTL_GET_MAC_TABLE					(SIOCIWFIRSTPRIV + 0x0F)
-
-#define RTPRIV_IOCTL_SHOW							(SIOCIWFIRSTPRIV + 0x11)
-enum {
-    SHOW_CONN_STATUS = 4,
-    SHOW_DRVIER_VERION = 5,
-    SHOW_BA_INFO = 6,
-	SHOW_DESC_INFO = 7,
-#ifdef RT2870
-	SHOW_RXBULK_INFO = 8,
-	SHOW_TXBULK_INFO = 9,
-#endif // RT2870 //
-    RAIO_OFF = 10,
-    RAIO_ON = 11,
-#ifdef QOS_DLS_SUPPORT
-	SHOW_DLS_ENTRY_INFO = 19,
-#endif // QOS_DLS_SUPPORT //
-	SHOW_CFG_VALUE = 20,
-	SHOW_ADHOC_ENTRY_INFO = 21,
-};
-
-
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef SNMP_SUPPORT
-//SNMP ieee 802dot11, kathy , 2008_0220
-// dot11res(3)
-#define RT_OID_802_11_MANUFACTUREROUI			0x0700
-#define RT_OID_802_11_MANUFACTURERNAME			0x0701
-#define RT_OID_802_11_RESOURCETYPEIDNAME		0x0702
-
-// dot11smt(1)
-#define RT_OID_802_11_PRIVACYOPTIONIMPLEMENTED	0x0703
-#define RT_OID_802_11_POWERMANAGEMENTMODE		0x0704
-#define OID_802_11_WEPDEFAULTKEYVALUE			0x0705 // read , write
-#define OID_802_11_WEPDEFAULTKEYID				0x0706
-#define RT_OID_802_11_WEPKEYMAPPINGLENGTH		0x0707
-#define OID_802_11_SHORTRETRYLIMIT				0x0708
-#define OID_802_11_LONGRETRYLIMIT				0x0709
-#define RT_OID_802_11_PRODUCTID					0x0710
-#define RT_OID_802_11_MANUFACTUREID				0x0711
-
-// //dot11Phy(4)
-#define OID_802_11_CURRENTCHANNEL				0x0712
-
-//dot11mac
-#define RT_OID_802_11_MAC_ADDRESS				0x0713
-#endif // SNMP_SUPPORT //
-
-#define OID_802_11_BUILD_CHANNEL_EX				0x0714
-#define OID_802_11_GET_CH_LIST					0x0715
-#define OID_802_11_GET_COUNTRY_CODE				0x0716
-#define OID_802_11_GET_CHANNEL_GEOGRAPHY		0x0717
-
-#ifdef LLTD_SUPPORT
-// for consistency with RT61
-#define RT_OID_GET_PHY_MODE                         0x761
-#endif // LLTD_SUPPORT //
-
-// MIMO Tx parameter, ShortGI, MCS, STBC, etc.  these are fields in TXWI. Don't change this definition!!!
-typedef union  _HTTRANSMIT_SETTING {
-#ifdef RT_BIG_ENDIAN
-	struct	{
-	USHORT		MODE:2;	// Use definition MODE_xxx.
-//	USHORT		rsv:3;
-	USHORT		TxBF:1;
-	USHORT		rsv:2;
-	USHORT		STBC:2;	//SPACE
-	USHORT		ShortGI:1;
-	USHORT		BW:1;	//channel bandwidth 20MHz or 40 MHz
-	USHORT   	MCS:7;                 // MCS
-	}	field;
-#else
-	struct	{
-	USHORT   	MCS:7;                 // MCS
-	USHORT		BW:1;	//channel bandwidth 20MHz or 40 MHz
-	USHORT		ShortGI:1;
-	USHORT		STBC:2;	//SPACE
-//	USHORT		rsv:3;
-	USHORT		rsv:2;
-	USHORT		TxBF:1;
-	USHORT		MODE:2;	// Use definition MODE_xxx.
-	}	field;
-#endif
-	USHORT		word;
- } HTTRANSMIT_SETTING, *PHTTRANSMIT_SETTING;
-
-typedef enum _RT_802_11_PREAMBLE {
-    Rt802_11PreambleLong,
-    Rt802_11PreambleShort,
-    Rt802_11PreambleAuto
-} RT_802_11_PREAMBLE, *PRT_802_11_PREAMBLE;
-
-// Only for STA, need to sync with AP
-typedef enum _RT_802_11_PHY_MODE {
-	PHY_11BG_MIXED = 0,
-	PHY_11B,
-	PHY_11A,
-	PHY_11ABG_MIXED,
-	PHY_11G,
-#ifdef DOT11_N_SUPPORT
-	PHY_11ABGN_MIXED,	// both band   5
-	PHY_11N_2_4G,		// 11n-only with 2.4G band   	6
-	PHY_11GN_MIXED,	// 2.4G band      7
-	PHY_11AN_MIXED,	// 5G  band       8
-	PHY_11BGN_MIXED,	// if check 802.11b.      9
-	PHY_11AGN_MIXED,	// if check 802.11b.      10
-	PHY_11N_5G,			// 11n-only with 5G band		11
-#endif // DOT11_N_SUPPORT //
-} RT_802_11_PHY_MODE;
-
-// put all proprietery for-query objects here to reduce # of Query_OID
-typedef struct _RT_802_11_LINK_STATUS {
-    ULONG   CurrTxRate;         // in units of 0.5Mbps
-    ULONG   ChannelQuality;     // 0..100 %
-    ULONG   TxByteCount;        // both ok and fail
-    ULONG   RxByteCount;        // both ok and fail
-    ULONG	CentralChannel;		// 40MHz central channel number
-} RT_802_11_LINK_STATUS, *PRT_802_11_LINK_STATUS;
-
-typedef struct _RT_802_11_EVENT_LOG {
-    LARGE_INTEGER   SystemTime;  // timestammp via NdisGetCurrentSystemTime()
-    UCHAR           Addr[MAC_ADDR_LENGTH];
-    USHORT          Event;       // EVENT_xxx
-} RT_802_11_EVENT_LOG, *PRT_802_11_EVENT_LOG;
-
-typedef struct _RT_802_11_EVENT_TABLE {
-    ULONG       Num;
-    ULONG       Rsv;     // to align Log[] at LARGE_INEGER boundary
-    RT_802_11_EVENT_LOG   Log[MAX_NUMBER_OF_EVENT];
-} RT_802_11_EVENT_TABLE, PRT_802_11_EVENT_TABLE;
-
-// MIMO Tx parameter, ShortGI, MCS, STBC, etc.  these are fields in TXWI. Don't change this definition!!!
-typedef union  _MACHTTRANSMIT_SETTING {
-	struct	{
-	USHORT   	MCS:7;                 // MCS
-	USHORT		BW:1;	//channel bandwidth 20MHz or 40 MHz
-	USHORT		ShortGI:1;
-	USHORT		STBC:2;	//SPACE
-	USHORT		rsv:3;
-	USHORT		MODE:2;	// Use definition MODE_xxx.
-	}	field;
-	USHORT		word;
- } MACHTTRANSMIT_SETTING, *PMACHTTRANSMIT_SETTING;
-
-typedef struct _RT_802_11_MAC_ENTRY {
-    UCHAR       Addr[MAC_ADDR_LENGTH];
-    UCHAR       Aid;
-    UCHAR       Psm;     // 0:PWR_ACTIVE, 1:PWR_SAVE
-    UCHAR		MimoPs;  // 0:MMPS_STATIC, 1:MMPS_DYNAMIC, 3:MMPS_Enabled
-    CHAR		AvgRssi0;
-	CHAR		AvgRssi1;
-	CHAR		AvgRssi2;
-	UINT32		ConnectedTime;
-    MACHTTRANSMIT_SETTING	TxRate;
-} RT_802_11_MAC_ENTRY, *PRT_802_11_MAC_ENTRY;
-
-typedef struct _RT_802_11_MAC_TABLE {
-    ULONG       Num;
-    RT_802_11_MAC_ENTRY Entry[MAX_NUMBER_OF_MAC];
-} RT_802_11_MAC_TABLE, *PRT_802_11_MAC_TABLE;
-
-// structure for query/set hardware register - MAC, BBP, RF register
-typedef struct _RT_802_11_HARDWARE_REGISTER {
-    ULONG   HardwareType;       // 0:MAC, 1:BBP, 2:RF register, 3:EEPROM
-    ULONG   Offset;             // Q/S register offset addr
-    ULONG   Data;               // R/W data buffer
-} RT_802_11_HARDWARE_REGISTER, *PRT_802_11_HARDWARE_REGISTER;
-
-// structure to tune BBP R17 "RX AGC VGC init"
-//typedef struct _RT_802_11_RX_AGC_VGC_TUNING {
-//    UCHAR   FalseCcaLowerThreshold;  // 0-255, def 10
-//    UCHAR   FalseCcaUpperThreshold;  // 0-255, def 100
-//    UCHAR   VgcDelta;                // R17 +-= VgcDelta whenever flase CCA over UpprThreshold
-//                                     // or lower than LowerThresholdupper threshold
-//    UCHAR   VgcUpperBound;           // max value of R17
-//} RT_802_11_RX_AGC_VGC_TUNING, *PRT_802_11_RX_AGC_VGC_TUNING;
-
-typedef struct _RT_802_11_AP_CONFIG {
-    ULONG   EnableTxBurst;      // 0-disable, 1-enable
-    ULONG   EnableTurboRate;    // 0-disable, 1-enable 72/100mbps turbo rate
-    ULONG   IsolateInterStaTraffic;     // 0-disable, 1-enable isolation
-    ULONG   HideSsid;           // 0-disable, 1-enable hiding
-    ULONG   UseBGProtection;    // 0-AUTO, 1-always ON, 2-always OFF
-    ULONG   UseShortSlotTime;   // 0-no use, 1-use 9-us short slot time
-    ULONG   Rsv1;               // must be 0
-    ULONG   SystemErrorBitmap;  // ignore upon SET, return system error upon QUERY
-} RT_802_11_AP_CONFIG, *PRT_802_11_AP_CONFIG;
-
-// structure to query/set STA_CONFIG
-typedef struct _RT_802_11_STA_CONFIG {
-    ULONG   EnableTxBurst;      // 0-disable, 1-enable
-    ULONG   EnableTurboRate;    // 0-disable, 1-enable 72/100mbps turbo rate
-    ULONG   UseBGProtection;    // 0-AUTO, 1-always ON, 2-always OFF
-    ULONG   UseShortSlotTime;   // 0-no use, 1-use 9-us short slot time when applicable
-    ULONG   AdhocMode; 			// 0-11b rates only (WIFI spec), 1 - b/g mixed, 2 - g only
-    ULONG   HwRadioStatus;      // 0-OFF, 1-ON, default is 1, Read-Only
-    ULONG   Rsv1;               // must be 0
-    ULONG   SystemErrorBitmap;  // ignore upon SET, return system error upon QUERY
-} RT_802_11_STA_CONFIG, *PRT_802_11_STA_CONFIG;
-
-//
-//  For OID Query or Set about BA structure
-//
-typedef	struct	_OID_BACAP_STRUC	{
-		UCHAR		RxBAWinLimit;
-		UCHAR		TxBAWinLimit;
-		UCHAR		Policy;	// 0: DELAY_BA 1:IMMED_BA  (//BA Policy subfiled value in ADDBA frame)   2:BA-not use. other value invalid
-		UCHAR		MpduDensity;	// 0: DELAY_BA 1:IMMED_BA  (//BA Policy subfiled value in ADDBA frame)   2:BA-not use. other value invalid
-		UCHAR       	AmsduEnable;	//Enable AMSDU transmisstion
-		UCHAR       	AmsduSize;	// 0:3839, 1:7935 bytes. UINT  MSDUSizeToBytes[]	= { 3839, 7935};
-		UCHAR       	MMPSmode;	// MIMO power save more, 0:static, 1:dynamic, 2:rsv, 3:mimo enable
-		BOOLEAN		AutoBA;	// Auto BA will automatically
-} OID_BACAP_STRUC, *POID_BACAP_STRUC;
-
-typedef struct _RT_802_11_ACL_ENTRY {
-    UCHAR   Addr[MAC_ADDR_LENGTH];
-    USHORT  Rsv;
-} RT_802_11_ACL_ENTRY, *PRT_802_11_ACL_ENTRY;
-
-typedef struct PACKED _RT_802_11_ACL {
-    ULONG   Policy;             // 0-disable, 1-positive list, 2-negative list
-    ULONG   Num;
-    RT_802_11_ACL_ENTRY Entry[MAX_NUMBER_OF_ACL];
-} RT_802_11_ACL, *PRT_802_11_ACL;
-
-typedef struct _RT_802_11_WDS {
-    ULONG						Num;
-    NDIS_802_11_MAC_ADDRESS		Entry[24/*MAX_NUM_OF_WDS_LINK*/];
-	ULONG						KeyLength;
-	UCHAR						KeyMaterial[32];
-} RT_802_11_WDS, *PRT_802_11_WDS;
-
-typedef struct _RT_802_11_TX_RATES_ {
-    UCHAR       SupRateLen;
-    UCHAR       SupRate[MAX_LENGTH_OF_SUPPORT_RATES];
-    UCHAR       ExtRateLen;
-    UCHAR       ExtRate[MAX_LENGTH_OF_SUPPORT_RATES];
-} RT_802_11_TX_RATES, *PRT_802_11_TX_RATES;
-
-
-// Definition of extra information code
-#define	GENERAL_LINK_UP			0x0			// Link is Up
-#define	GENERAL_LINK_DOWN		0x1			// Link is Down
-#define	HW_RADIO_OFF			0x2			// Hardware radio off
-#define	SW_RADIO_OFF			0x3			// Software radio off
-#define	AUTH_FAIL				0x4			// Open authentication fail
-#define	AUTH_FAIL_KEYS			0x5			// Shared authentication fail
-#define	ASSOC_FAIL				0x6			// Association failed
-#define	EAP_MIC_FAILURE			0x7			// Deauthencation because MIC failure
-#define	EAP_4WAY_TIMEOUT		0x8			// Deauthencation on 4-way handshake timeout
-#define	EAP_GROUP_KEY_TIMEOUT	0x9			// Deauthencation on group key handshake timeout
-#define	EAP_SUCCESS				0xa			// EAP succeed
-#define	DETECT_RADAR_SIGNAL		0xb         // Radar signal occur in current channel
-#define EXTRA_INFO_MAX			0xb			// Indicate Last OID
-
-#define EXTRA_INFO_CLEAR		0xffffffff
-
-// This is OID setting structure. So only GF or MM as Mode. This is valid when our wirelss mode has 802.11n in use.
-typedef struct {
-	RT_802_11_PHY_MODE		PhyMode; 	//
-	UCHAR		TransmitNo;
-	UCHAR		HtMode; 	//HTMODE_GF or HTMODE_MM
-	UCHAR		ExtOffset;	//extension channel above or below
-	UCHAR		MCS;
-	UCHAR   	BW;
-	UCHAR		STBC;
-	UCHAR		SHORTGI;
-	UCHAR		rsv;
-} OID_SET_HT_PHYMODE, *POID_SET_HT_PHYMODE;
-
-#ifdef NINTENDO_AP
-#define NINTENDO_MAX_ENTRY 16
-#define NINTENDO_SSID_NAME_LN 8
-#define NINTENDO_SSID_NAME "NWCUSBAP"
-#define NINTENDO_PROBE_REQ_FLAG_MASK 0x03
-#define NINTENDO_PROBE_REQ_ON 0x01
-#define NINTENDO_PROBE_REQ_SIGNAL 0x02
-#define NINTENDO_PROBE_RSP_ON 0x01
-#define NINTENDO_SSID_NICKNAME_LN 20
-
-#define NINTENDO_WEPKEY_LN 13
-
-typedef struct _NINTENDO_SSID
-{
-	UCHAR	NINTENDOFixChar[NINTENDO_SSID_NAME_LN];
-	UCHAR	zero1;
-	UCHAR	registe;
-	UCHAR	ID;
-	UCHAR	zero2;
-	UCHAR	NICKname[NINTENDO_SSID_NICKNAME_LN];
-} RT_NINTENDO_SSID, *PRT_NINTENDO_SSID;
-
-typedef struct _NINTENDO_ENTRY
-{
-	UCHAR	NICKname[NINTENDO_SSID_NICKNAME_LN];
-    UCHAR   DS_Addr[ETH_LENGTH_OF_ADDRESS];
-	UCHAR	registe;
-	UCHAR	UserSpaceAck;
-} RT_NINTENDO_ENTRY, *PRT_NINTENDO_ENTRY;
-
-//RTPRIV_IOCTL_NINTENDO_GET_TABLE
-//RTPRIV_IOCTL_NINTENDO_SET_TABLE
-typedef struct _NINTENDO_TABLE
-{
-	UINT				number;
-	RT_NINTENDO_ENTRY	entry[NINTENDO_MAX_ENTRY];
-} RT_NINTENDO_TABLE, *PRT_NINTENDO_TABLE;
-
-//RTPRIV_IOCTL_NINTENDO_SEED_WEPKEY
-typedef struct _NINTENDO_SEED_WEPKEY
-{
-	UCHAR	seed[NINTENDO_SSID_NICKNAME_LN];
-	UCHAR	wepkey[16];//use 13 for 104 bits wep key
-} RT_NINTENDO_SEED_WEPKEY, *PRT_NINTENDO_SEED_WEPKEY;
-#endif // NINTENDO_AP //
-
-#ifdef LLTD_SUPPORT
-typedef struct _RT_LLTD_ASSOICATION_ENTRY {
-    UCHAR           Addr[ETH_LENGTH_OF_ADDRESS];
-    unsigned short  MOR;        // maximum operational rate
-    UCHAR           phyMode;
-} RT_LLTD_ASSOICATION_ENTRY, *PRT_LLTD_ASSOICATION_ENTRY;
-
-typedef struct _RT_LLTD_ASSOICATION_TABLE {
-    unsigned int                Num;
-    RT_LLTD_ASSOICATION_ENTRY   Entry[MAX_NUMBER_OF_MAC];
-} RT_LLTD_ASSOICATION_TABLE, *PRT_LLTD_ASSOICATION_TABLE;
-#endif // LLTD_SUPPORT //
-
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-//rt2860, kathy 2007-0118
-// structure for DLS
-typedef struct _RT_802_11_DLS_UI {
-	USHORT						TimeOut;		// unit: second , set by UI
-	USHORT						CountDownTimer;	// unit: second , used by driver only
-	NDIS_802_11_MAC_ADDRESS		MacAddr;		// set by UI
-	UCHAR						Status;			// 0: none , 1: wait STAkey, 2: finish DLS setup , set by driver only
-	BOOLEAN						Valid;			// 1: valid , 0: invalid , set by UI, use to setup or tear down DLS link
-} RT_802_11_DLS_UI, *PRT_802_11_DLS_UI;
-
-typedef struct _RT_802_11_DLS_INFO {
-	RT_802_11_DLS_UI	Entry[MAX_NUMBER_OF_DLS_ENTRY];
-	UCHAR				num;
-} RT_802_11_DLS_INFO, *PRT_802_11_DLS_INFO;
-
-typedef enum _RT_802_11_DLS_MODE {
-    DLS_NONE,
-    DLS_WAIT_KEY,
-    DLS_FINISH
-} RT_802_11_DLS_MODE;
-#endif // QOS_DLS_SUPPORT //
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-#define	RT_ASSOC_EVENT_FLAG                         0x0101
-#define	RT_DISASSOC_EVENT_FLAG                      0x0102
-#define	RT_REQIE_EVENT_FLAG                         0x0103
-#define	RT_RESPIE_EVENT_FLAG                        0x0104
-#define	RT_ASSOCINFO_EVENT_FLAG                     0x0105
-#define RT_PMKIDCAND_FLAG                           0x0106
-#define RT_INTERFACE_DOWN                           0x0107
-#define RT_INTERFACE_UP                             0x0108
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
-
-#define MAX_CUSTOM_LEN 128
-
-#ifdef CONFIG_STA_SUPPORT
-typedef enum _RT_802_11_D_CLIENT_MODE
-{
-   Rt802_11_D_None,
-   Rt802_11_D_Flexible,
-   Rt802_11_D_Strict,
-} RT_802_11_D_CLIENT_MODE, *PRT_802_11_D_CLIENT_MODE;
-#endif // CONFIG_STA_SUPPORT //
-
-typedef struct _RT_CHANNEL_LIST_INFO
-{
-	UCHAR ChannelList[MAX_NUM_OF_CHS];   // list all supported channels for site survey
-	UCHAR ChannelListNum; // number of channel in ChannelList[]
-} RT_CHANNEL_LIST_INFO, *PRT_CHANNEL_LIST_INFO;
-
-// WSC configured credential
-typedef	struct	_WSC_CREDENTIAL
-{
-	NDIS_802_11_SSID	SSID;				// mandatory
-	USHORT				AuthType;			// mandatory, 1: open, 2: wpa-psk, 4: shared, 8:wpa, 0x10: wpa2, 0x20: wpa2-psk
-	USHORT				EncrType;			// mandatory, 1: none, 2: wep, 4: tkip, 8: aes
-	UCHAR				Key[64];			// mandatory, Maximum 64 byte
-	USHORT				KeyLength;
-	UCHAR				MacAddr[6];			// mandatory, AP MAC address
-	UCHAR				KeyIndex;			// optional, default is 1
-	UCHAR				Rsvd[3];			// Make alignment
-}	WSC_CREDENTIAL, *PWSC_CREDENTIAL;
-
-// WSC configured profiles
-typedef	struct	_WSC_PROFILE
-{
-	UINT			ProfileCnt;
-	WSC_CREDENTIAL	Profile[8];				// Support up to 8 profiles
-}	WSC_PROFILE, *PWSC_PROFILE;
-
-
-#endif // _OID_H_
-
+#include "../rt2860/oid.h"
diff --git a/drivers/staging/rt2870/rt2870.h b/drivers/staging/rt2870/rt2870.h
index a69cf338e49..5e5b3f2b7eb 100644
--- a/drivers/staging/rt2870/rt2870.h
+++ b/drivers/staging/rt2870/rt2870.h
@@ -33,7 +33,6 @@
 
 /* rtmp_def.h */
 //
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
 #define BULKAGGRE_ZISE          100
 #define RT28XX_DRVDATA_SET(_a)                                             usb_set_intfdata(_a, pAd);
 #define RT28XX_PUT_DEVICE                                                  usb_put_dev
@@ -41,22 +40,15 @@
 #define RTUSB_SUBMIT_URB(pUrb)                                             usb_submit_urb(pUrb, GFP_ATOMIC)
 #define	RTUSB_URB_ALLOC_BUFFER(pUsb_Dev, BufSize, pDma_addr)               usb_buffer_alloc(pUsb_Dev, BufSize, GFP_ATOMIC, pDma_addr)
 #define	RTUSB_URB_FREE_BUFFER(pUsb_Dev, BufSize, pTransferBuf, Dma_addr)   usb_buffer_free(pUsb_Dev, BufSize, pTransferBuf, Dma_addr)
-#else
-#define BULKAGGRE_ZISE          60
-#define RT28XX_DRVDATA_SET(_a)
-#define RT28XX_PUT_DEVICE(dev_p)
-#define RTUSB_ALLOC_URB(iso)                                               usb_alloc_urb(iso)
-#define RTUSB_SUBMIT_URB(pUrb)                                             usb_submit_urb(pUrb)
-#define RTUSB_URB_ALLOC_BUFFER(pUsb_Dev, BufSize, pDma_addr)               kmalloc(BufSize, GFP_ATOMIC)
-#define	RTUSB_URB_FREE_BUFFER(pUsb_Dev, BufSize, pTransferBuf, Dma_addr)   kfree(pTransferBuf)
-#endif
 
 #define RXBULKAGGRE_ZISE        12
 #define MAX_TXBULK_LIMIT        (LOCAL_TXBUF_SIZE*(BULKAGGRE_ZISE-1))
 #define MAX_TXBULK_SIZE         (LOCAL_TXBUF_SIZE*BULKAGGRE_ZISE)
 #define MAX_RXBULK_SIZE         (LOCAL_TXBUF_SIZE*RXBULKAGGRE_ZISE)
 #define MAX_MLME_HANDLER_MEMORY 20
+#ifndef RT30xx
 #define	RETRY_LIMIT             10
+#endif
 #define BUFFER_SIZE				2400	//2048
 #define	TX_RING					0xa
 #define	PRIO_RING				0xc
@@ -72,6 +64,9 @@
 #define	fRTUSB_BULK_OUT_DATA_NORMAL_2			0x00020000
 #define	fRTUSB_BULK_OUT_DATA_NORMAL_3			0x00040000
 #define	fRTUSB_BULK_OUT_DATA_NORMAL_4			0x00080000
+#ifdef RT30xx
+#define	fRTUSB_BULK_OUT_DATA_NORMAL_5			0x00100000
+#endif
 
 #define	fRTUSB_BULK_OUT_PSPOLL					0x00000020
 #define	fRTUSB_BULK_OUT_DATA_FRAG				0x00000040
@@ -79,10 +74,7 @@
 #define	fRTUSB_BULK_OUT_DATA_FRAG_3				0x00000100
 #define	fRTUSB_BULK_OUT_DATA_FRAG_4				0x00000200
 
-#ifdef RALINK_ATE
-#define	fRTUSB_BULK_OUT_DATA_ATE				0x00100000
-#endif // RALINK_ATE //
-
+#ifndef RT30xx
 #define RT2870_USB_DEVICES	\
 {	\
 	{USB_DEVICE(0x148F,0x2770)}, /* Ralink */		\
@@ -148,6 +140,84 @@
 	{USB_DEVICE(0x7392,0x7717)}, /* Edimax */		\
 	{ }/* Terminating entry */                      \
 }
+#endif
+#ifdef RT30xx
+#define RT2870_USB_DEVICES	\
+{	\
+	{USB_DEVICE(0x148F,0x2770)}, /* Ralink */		\
+	{USB_DEVICE(0x148F,0x2870)}, /* Ralink */		\
+	{USB_DEVICE(0x148F,0x3070)}, /* Ralink 3070 */	\
+	{USB_DEVICE(0x148F,0x3071)}, /* Ralink 3071 */	\
+	{USB_DEVICE(0x148F,0x3072)}, /* Ralink 3072 */	\
+	{USB_DEVICE(0x0B05,0x1731)}, /* Asus */			\
+	{USB_DEVICE(0x0B05,0x1732)}, /* Asus */			\
+	{USB_DEVICE(0x0B05,0x1742)}, /* Asus */			\
+	{USB_DEVICE(0x0DF6,0x0017)}, /* Sitecom */		\
+	{USB_DEVICE(0x0DF6,0x002B)}, /* Sitecom */		\
+	{USB_DEVICE(0x0DF6,0x002C)}, /* Sitecom */		\
+	{USB_DEVICE(0x0DF6,0x003E)}, /* Sitecom 3070 */	\
+	{USB_DEVICE(0x0DF6,0x002D)}, /* Sitecom */		\
+	{USB_DEVICE(0x0DF6,0x0039)}, /* Sitecom 2770 */	\
+	{USB_DEVICE(0x14B2,0x3C06)}, /* Conceptronic */		\
+	{USB_DEVICE(0x14B2,0x3C28)}, /* Conceptronic */		\
+	{USB_DEVICE(0x2019,0xED06)}, /* Planex Communications, Inc. */		\
+	{USB_DEVICE(0x2019,0xAB25)}, /* Planex Communications, Inc. RT3070 */		\
+	{USB_DEVICE(0x07D1,0x3C09)}, /* D-Link */		\
+	{USB_DEVICE(0x07D1,0x3C11)}, /* D-Link */		\
+	{USB_DEVICE(0x2001,0x3C09)}, /* D-Link */		\
+	{USB_DEVICE(0x2001,0x3C0A)}, /* D-Link 3072*/	\
+	{USB_DEVICE(0x14B2,0x3C07)}, /* AL */			\
+	{USB_DEVICE(0x14B2,0x3C12)}, /* AL 3070 */		\
+	{USB_DEVICE(0x050D,0x8053)}, /* Belkin */		\
+	{USB_DEVICE(0x14B2,0x3C23)}, /* Airlink */		\
+	{USB_DEVICE(0x14B2,0x3C27)}, /* Airlink */		\
+	{USB_DEVICE(0x07AA,0x002F)}, /* Corega */		\
+	{USB_DEVICE(0x07AA,0x003C)}, /* Corega */		\
+	{USB_DEVICE(0x07AA,0x003F)}, /* Corega */		\
+	{USB_DEVICE(0x18C5,0x0012)}, /* Corega 3070 */	\
+	{USB_DEVICE(0x1044,0x800B)}, /* Gigabyte */		\
+	{USB_DEVICE(0x1044,0x800D)}, /* Gigabyte GN-WB32L 3070 */		\
+	{USB_DEVICE(0x15A9,0x0006)}, /* Sparklan */		\
+	{USB_DEVICE(0x083A,0xB522)}, /* SMC */			\
+	{USB_DEVICE(0x083A,0xA618)}, /* SMC */			\
+	{USB_DEVICE(0x083A,0x8522)}, /* Arcadyan */		\
+	{USB_DEVICE(0x083A,0x7512)}, /* Arcadyan 2770 */		\
+	{USB_DEVICE(0x083A,0x7522)}, /* Arcadyan */		\
+	{USB_DEVICE(0x083A,0x7511)}, /* Arcadyan 3070 */ \
+	{USB_DEVICE(0x0CDE,0x0022)}, /* ZCOM */			\
+	{USB_DEVICE(0x0586,0x3416)}, /* Zyxel */		\
+	{USB_DEVICE(0x0CDE,0x0025)}, /* Zyxel */		\
+	{USB_DEVICE(0x1740,0x9701)}, /* EnGenius */		\
+	{USB_DEVICE(0x1740,0x9702)}, /* EnGenius */		\
+	{USB_DEVICE(0x1740,0x9703)}, /* EnGenius 3070 */		\
+	{USB_DEVICE(0x0471,0x200f)}, /* Philips */		\
+	{USB_DEVICE(0x14B2,0x3C25)}, /* Draytek */		\
+	{USB_DEVICE(0x13D3,0x3247)}, /* AzureWave */	\
+	{USB_DEVICE(0x13D3,0x3273)}, /* AzureWave 3070*/	\
+	{USB_DEVICE(0x083A,0x6618)}, /* Accton */		\
+	{USB_DEVICE(0x15c5,0x0008)}, /* Amit */			\
+	{USB_DEVICE(0x0E66,0x0001)}, /* Hawking */		\
+	{USB_DEVICE(0x0E66,0x0003)}, /* Hawking */		\
+	{USB_DEVICE(0x129B,0x1828)}, /* Siemens */		\
+	{USB_DEVICE(0x157E,0x300E)},	/* U-Media */	\
+	{USB_DEVICE(0x050d,0x805c)},					\
+	{USB_DEVICE(0x1482,0x3C09)}, /* Abocom*/		\
+	{USB_DEVICE(0x14B2,0x3C09)}, /* Alpha */		\
+	{USB_DEVICE(0x04E8,0x2018)}, /* samsung */  	\
+	{USB_DEVICE(0x07B8,0x3070)}, /* AboCom 3070 */	\
+	{USB_DEVICE(0x07B8,0x3071)}, /* AboCom 3071 */	\
+	{USB_DEVICE(0x07B8,0x3072)}, /* Abocom 3072 */	\
+	{USB_DEVICE(0x7392,0x7711)}, /* Edimax 3070 */	\
+	{USB_DEVICE(0x5A57,0x0280)}, /* Zinwell */		\
+	{USB_DEVICE(0x5A57,0x0282)}, /* Zinwell */		\
+	{USB_DEVICE(0x1A32,0x0304)}, /* Quanta 3070 */		\
+	{USB_DEVICE(0x0789,0x0162)}, /* Logitec 2870 */		\
+	{USB_DEVICE(0x0789,0x0163)}, /* Logitec 2870 */		\
+	{USB_DEVICE(0x0789,0x0164)}, /* Logitec 2870 */		\
+	{USB_DEVICE(0x1EDA,0x2310)}, /* AirTies 3070 */		\
+	{ }/* Terminating entry */                      \
+}
+#endif
 
 #define	FREE_HTTX_RING(_p, _b, _t)			\
 {										\
@@ -161,30 +231,6 @@
 //
 // RXINFO appends at the end of each rx packet.
 //
-#ifdef RT_BIG_ENDIAN
-typedef	struct	PACKED _RXINFO_STRUC {
-	UINT32		PlcpSignal:12;
-	UINT32		LastAMSDU:1;
-	UINT32		CipherAlg:1;
-	UINT32		PlcpRssil:1;
-	UINT32		Decrypted:1;
-	UINT32		AMPDU:1;		// To be moved
-	UINT32		L2PAD:1;
-	UINT32		RSSI:1;
-	UINT32		HTC:1;
-	UINT32		AMSDU:1;		// rx with 802.3 header, not 802.11 header.
-	UINT32		CipherErr:2;        // 0: decryption okay, 1:ICV error, 2:MIC error, 3:KEY not valid
-	UINT32		Crc:1;              // 1: CRC error
-	UINT32		MyBss:1;  	// 1: this frame belongs to the same BSSID
-	UINT32		Bcast:1;            // 1: this is a broadcast frame
-	UINT32		Mcast:1;            // 1: this is a multicast frame
-	UINT32		U2M:1;              // 1: this RX frame is unicast to me
-	UINT32		FRAG:1;
-	UINT32		NULLDATA:1;
-	UINT32		DATA:1;
-	UINT32		BA:1;
-}	RXINFO_STRUC, *PRXINFO_STRUC, RT28XX_RXD_STRUC, *PRT28XX_RXD_STRUC;
-#else
 typedef	struct	PACKED _RXINFO_STRUC {
 	UINT32		BA:1;
 	UINT32		DATA:1;
@@ -207,25 +253,10 @@ typedef	struct	PACKED _RXINFO_STRUC {
 	UINT32		LastAMSDU:1;
 	UINT32		PlcpSignal:12;
 }	RXINFO_STRUC, *PRXINFO_STRUC, RT28XX_RXD_STRUC, *PRT28XX_RXD_STRUC;
-#endif
-
 
 //
 // TXINFO
 //
-#ifdef RT_BIG_ENDIAN
-typedef	struct	_TXINFO_STRUC {
-	// Word	0
-	UINT32		USBDMATxburst:1;//used ONLY in USB bulk Aggre. Force USB DMA transmit frame from current selected endpoint
-	UINT32		USBDMANextVLD:1;	//used ONLY in USB bulk Aggregation, NextValid
-	UINT32		rsv2:2;  // Software use.
-	UINT32		SwUseLastRound:1; // Software use.
-	UINT32		QSEL:2;	// select on-chip FIFO ID for 2nd-stage output scheduler.0:MGMT, 1:HCCA 2:EDCA
-	UINT32		WIV:1;	// Wireless Info Valid. 1 if Driver already fill WI,  o if DMA needs to copy WI to correctposition
-	UINT32		rsv:8;
-	UINT32		USBDMATxPktLen:16;	//used ONLY in USB bulk Aggregation,  Total byte counts of all sub-frame.
-}	TXINFO_STRUC, *PTXINFO_STRUC;
-#else
 typedef	struct	_TXINFO_STRUC {
 	// Word	0
 	UINT32		USBDMATxPktLen:16;	//used ONLY in USB bulk Aggregation,  Total byte counts of all sub-frame.
@@ -237,7 +268,6 @@ typedef	struct	_TXINFO_STRUC {
 	UINT32		USBDMANextVLD:1;	//used ONLY in USB bulk Aggregation, NextValid
 	UINT32		USBDMATxburst:1;//used ONLY in USB bulk Aggre. Force USB DMA transmit frame from current selected endpoint
 }	TXINFO_STRUC, *PTXINFO_STRUC;
-#endif
 
 #define TXINFO_SIZE				4
 #define RXINFO_SIZE				4
@@ -254,6 +284,23 @@ typedef	struct	_MGMT_STRUC	{
 
 
 /* ----------------- EEPROM Related MACRO ----------------- */
+#ifdef RT30xx
+#define RT28xx_EEPROM_READ16(pAd, offset, var)					\
+	do {														\
+		RTUSBReadEEPROM(pAd, offset, (PUCHAR)&(var), 2);		\
+		if(!pAd->bUseEfuse)										\
+		var = le2cpu16(var);									\
+	}while(0)
+
+#define RT28xx_EEPROM_WRITE16(pAd, offset, var)					\
+	do{															\
+		USHORT _tmpVar=var;										\
+		if(!pAd->bUseEfuse)									\
+		_tmpVar = cpu2le16(var);								\
+		RTUSBWriteEEPROM(pAd, offset, (PUCHAR)&(_tmpVar), 2);	\
+	}while(0)
+#endif // RT30xx //
+#ifndef RT30xx
 #define RT28xx_EEPROM_READ16(pAd, offset, var)					\
 	do {														\
 		RTUSBReadEEPROM(pAd, offset, (PUCHAR)&(var), 2);		\
@@ -266,6 +313,7 @@ typedef	struct	_MGMT_STRUC	{
 		_tmpVar = cpu2le16(var);								\
 		RTUSBWriteEEPROM(pAd, offset, (PUCHAR)&(_tmpVar), 2);	\
 	}while(0)
+#endif // RT30xx //
 
 /* ----------------- TASK/THREAD Related MACRO ----------------- */
 #define RT28XX_TASK_THREAD_INIT(pAd, Status)		\
@@ -273,19 +321,8 @@ typedef	struct	_MGMT_STRUC	{
 
 
 /* ----------------- Frimware Related MACRO ----------------- */
-#if 0
-#define RT28XX_FIRMUD_INIT(pAd)		\
-	{	UINT32	MacReg;				\
-		RTUSBReadMACRegister(pAd, MAC_CSR0, &MacReg); }
-
-#define RT28XX_FIRMUD_END(pAd)	\
-	RTUSBWriteMACRegister(pAd, 0x7014, 0xffffffff);	\
-	RTUSBWriteMACRegister(pAd, 0x701c, 0xffffffff);	\
-	RTUSBFirmwareRun(pAd);
-#else
 #define RT28XX_WRITE_FIRMWARE(_pAd, _pFwImage, _FwLen)		\
 	RTUSBFirmwareWrite(_pAd, _pFwImage, _FwLen)
-#endif
 
 /* ----------------- TX Related MACRO ----------------- */
 #define RT28XX_START_DEQUEUE(pAd, QueIdx, irqFlags)				\
@@ -370,13 +407,6 @@ extern UCHAR EpToQueue[6];
 /* ----------------- RX Related MACRO ----------------- */
 //#define RT28XX_RX_ERROR_CHECK				RTMPCheckRxWI
 
-#if 0
-#define RT28XX_RCV_INIT(pAd)					\
-	pAd->TransferBufferLength = 0;				\
-	pAd->ReadPosition = 0;						\
-	pAd->pCurrRxContext = NULL;
-#endif
-
 #define RT28XX_RV_ALL_BUF_END(bBulkReceive)		\
 	/* We return STATUS_MORE_PROCESSING_REQUIRED so that the completion */	\
 	/* routine (IofCompleteRequest) will stop working on the irp. */		\
@@ -384,27 +414,6 @@ extern UCHAR EpToQueue[6];
 
 
 /* ----------------- ASIC Related MACRO ----------------- */
-#if 0
-#define RT28XX_DMA_WRITE_INIT(GloCfg)			\
-	{	GloCfg.field.EnTXWriteBackDDONE = 1;	\
-		GloCfg.field.EnableRxDMA = 1;			\
-		GloCfg.field.EnableTxDMA = 1; }
-
-#define RT28XX_DMA_POST_WRITE(_pAd)				\
-	do{	USB_DMA_CFG_STRUC	UsbCfg;				\
-		UsbCfg.word = 0;						\
-		/* for last packet, PBF might use more than limited, so minus 2 to prevent from error */ \
-		UsbCfg.field.RxBulkAggLmt = (MAX_RXBULK_SIZE /1024)-3;	\
-		UsbCfg.field.phyclear = 0;								\
-		/* usb version is 1.1,do not use bulk in aggregation */	\
-		if (_pAd->BulkInMaxPacketSize == 512)					\
-			UsbCfg.field.RxBulkAggEn = 1;						\
-		UsbCfg.field.RxBulkEn = 1;								\
-		UsbCfg.field.TxBulkEn = 1;								\
-		UsbCfg.field.RxBulkAggTOut = 0x80; /* 2006-10-18 */		\
-		RTUSBWriteMACRegister(_pAd, USB_DMA_CFG, UsbCfg.word); 	\
-	}while(0)
-#endif
 
 // reset MAC of a station entry to 0xFFFFFFFFFFFF
 #define RT28XX_STA_ENTRY_MAC_RESET(pAd, Wcid)					\
@@ -420,6 +429,14 @@ extern UCHAR EpToQueue[6];
 	RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_SET_CLIENT_MAC_ENTRY, 	\
 							pEntry, sizeof(MAC_TABLE_ENTRY));
 
+#ifdef RT30xx
+// add by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet
+// Set MAC register value according operation mode
+#define RT28XX_UPDATE_PROTECT(pAd)	\
+ 	RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_UPDATE_PROTECT, NULL, 0);
+// end johnli
+#endif
+
 // remove Pair-wise key material from ASIC
 // yet implement
 #define RT28XX_STA_ENTRY_KEY_DEL(pAd, BssIdx, Wcid)
@@ -507,8 +524,10 @@ extern UCHAR EpToQueue[6];
 
 #define RT28xx_CHIP_NAME            "RT2870"
 #define USB_CYC_CFG                 0x02a4
+#ifndef RT30xx
 #define STATUS_SUCCESS				0x00
 #define STATUS_UNSUCCESSFUL 		0x01
+#endif
 #define NT_SUCCESS(status)			(((status) > 0) ? (1):(0))
 #define InterlockedIncrement 	 	atomic_inc
 #define NdisInterlockedIncrement 	atomic_inc
@@ -533,7 +552,9 @@ extern UCHAR EpToQueue[6];
 //#undef MlmeAllocateMemory
 //#undef MlmeFreeMemory
 
+#ifndef RT30xx
 typedef int				NTSTATUS;
+#endif
 typedef struct usb_device	* PUSB_DEV;
 
 /* MACRO for linux usb */
@@ -551,23 +572,9 @@ typedef struct usb_ctrlrequest devctrlrequest;
 #define UNLINK_TIMEOUT_MS		3
 
 /* unlink urb	*/
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,7)
 #define RTUSB_UNLINK_URB(pUrb)		usb_kill_urb(pUrb)
-#else
-#define RTUSB_UNLINK_URB(pUrb)		usb_unlink_urb(pUrb)
-#endif
 
 // Prototypes of completion funuc.
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-#define RTUSBBulkOutDataPacketComplete(purb, pt_regs)    RTUSBBulkOutDataPacketComplete(purb)
-#define RTUSBBulkOutMLMEPacketComplete(pUrb, pt_regs)    RTUSBBulkOutMLMEPacketComplete(pUrb)
-#define RTUSBBulkOutNullFrameComplete(pUrb, pt_regs)     RTUSBBulkOutNullFrameComplete(pUrb)
-#define RTUSBBulkOutRTSFrameComplete(pUrb, pt_regs)      RTUSBBulkOutRTSFrameComplete(pUrb)
-#define RTUSBBulkOutPsPollComplete(pUrb, pt_regs)        RTUSBBulkOutPsPollComplete(pUrb)
-#define RTUSBBulkRxComplete(pUrb, pt_regs)               RTUSBBulkRxComplete(pUrb)
-#endif
-
-
 VOID RTUSBBulkOutDataPacketComplete(purbb_t purb, struct pt_regs *pt_regs);
 VOID RTUSBBulkOutMLMEPacketComplete(purbb_t pUrb, struct pt_regs *pt_regs);
 VOID RTUSBBulkOutNullFrameComplete(purbb_t pUrb, struct pt_regs *pt_regs);
@@ -575,7 +582,7 @@ VOID RTUSBBulkOutRTSFrameComplete(purbb_t pUrb, struct pt_regs *pt_regs);
 VOID RTUSBBulkOutPsPollComplete(purbb_t pUrb, struct pt_regs *pt_regs);
 VOID RTUSBBulkRxComplete(purbb_t pUrb, struct pt_regs *pt_regs);
 
-
+#ifndef RT30xx
 #define RTUSBMlmeUp(pAd)	        \
 {								    \
 	POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;	\
@@ -591,7 +598,22 @@ VOID RTUSBBulkRxComplete(purbb_t pUrb, struct pt_regs *pt_regs);
 	CHECK_PID_LEGALITY(task_pid(pObj->RTUSBCmdThr_task))	    \
 	    up(&(pAd->RTUSBCmd_semaphore)); \
 }
+#endif
+#ifdef RT30xx
+#define RTUSBMlmeUp(pAd)	        \
+{								    \
+	POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;	\
+	if(pObj->MLMEThr_pid>0)		    \
+        up(&(pAd->mlme_semaphore)); \
+}
 
+#define RTUSBCMDUp(pAd)	                \
+{									    \
+	POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;	\
+	if(pObj->RTUSBCmdThr_pid>0)		    \
+	    up(&(pAd->RTUSBCmd_semaphore)); \
+}
+#endif
 
 static inline NDIS_STATUS RTMPAllocateMemory(
 	OUT PVOID *ptr,
@@ -633,7 +655,9 @@ typedef struct   _RT_SET_ASIC_WCID {
 	ULONG WCID;          // mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based
 	ULONG SetTid;        // time-based: seconds, packet-based: kilo-packets
 	ULONG DeleteTid;        // time-based: seconds, packet-based: kilo-packets
+#ifndef RT30xx
 	UCHAR Addr[MAC_ADDR_LEN];	// avoid in interrupt when write key
+#endif
 } RT_SET_ASIC_WCID,*PRT_SET_ASIC_WCID;
 
 typedef struct   _RT_SET_ASIC_WCID_ATTRI {
@@ -676,13 +700,6 @@ typedef	struct	_CmdQ	{
 	UINT32		CmdQState;
 }CmdQ, *PCmdQ;
 
-//
-// For WPA SUPPLICANT: WIRELESS EXT support wireless events: v14 or newer
-//
-#if WIRELESS_EXT >= 14
-//#define WPA_SUPPLICANT_SUPPORT  1
-#endif
-
 /* oid.h */
 // Cipher suite type for mixed mode group cipher, P802.11i-2004
 typedef enum _RT_802_11_CIPHER_SUITE_TYPE {
@@ -742,6 +759,11 @@ typedef	struct	_CMDHandler_TLV	{
 #define CMDTHREAD_802_11_SET_PREAMBLE               0x0D790101	// cmd
 #define CMDTHREAD_802_11_COUNTER_MEASURE			0x0D790102	// cmd
 
+#ifdef RT30xx
+// add by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet
+#define CMDTHREAD_UPDATE_PROTECT					0x0D790103	// cmd
+// end johnli
+#endif
 
 #define WPA1AKMBIT	    0x01
 #define WPA2AKMBIT	    0x02
diff --git a/drivers/staging/rt2870/rt28xx.h b/drivers/staging/rt2870/rt28xx.h
index 3927d22f78f..29bad957de4 100644
--- a/drivers/staging/rt2870/rt28xx.h
+++ b/drivers/staging/rt2870/rt28xx.h
@@ -1,2689 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	rt28xx.h
-
-	Abstract:
-	RT28xx ASIC related definition & structures
-
-	Revision History:
-	Who			When		  What
-	--------	----------	  ----------------------------------------------
-       Jan Lee           Jan-3-2006     created for RT2860c
-*/
-
-#ifndef	__RT28XX_H__
-#define	__RT28XX_H__
-
-
-//
-// PCI registers - base address 0x0000
-//
-#define PCI_CFG			0x0000
-#define PCI_EECTRL			0x0004
-#define PCI_MCUCTRL			0x0008
-
-//
-// SCH/DMA registers - base address 0x0200
-//
-// INT_SOURCE_CSR: Interrupt source register. Write one to clear corresponding bit
-//
-#define DMA_CSR0      0x200
-#define INT_SOURCE_CSR      0x200
-#ifdef RT_BIG_ENDIAN
-typedef	union	_INT_SOURCE_CSR_STRUC	{
-	struct	{
-		UINT32       	:14;
-		UINT32       	TxCoherent:1;
-		UINT32       	RxCoherent:1;
-		UINT32       	GPTimer:1;
-		UINT32       	AutoWakeup:1;//bit14
-		UINT32       	TXFifoStatusInt:1;//FIFO Statistics is full, sw should read 0x171c
-		UINT32       	PreTBTT:1;
-		UINT32       	TBTTInt:1;
-		UINT32       	RxTxCoherent:1;
-		UINT32       	MCUCommandINT:1;
-		UINT32       	MgmtDmaDone:1;
-		UINT32       	HccaDmaDone:1;
-		UINT32       	Ac3DmaDone:1;
-		UINT32       	Ac2DmaDone:1;
-		UINT32       	Ac1DmaDone:1;
-		UINT32		Ac0DmaDone:1;
-		UINT32		RxDone:1;
-		UINT32		TxDelayINT:1;	//delayed interrupt, not interrupt until several int or time limit hit
-		UINT32		RxDelayINT:1; //dealyed interrupt
-	}	field;
-	UINT32			word;
-}	INT_SOURCE_CSR_STRUC, *PINT_SOURCE_CSR_STRUC;
-#else
-typedef	union	_INT_SOURCE_CSR_STRUC	{
-	struct	{
-		UINT32		RxDelayINT:1;
-		UINT32		TxDelayINT:1;
-		UINT32		RxDone:1;
-		UINT32		Ac0DmaDone:1;//4
-		UINT32       	Ac1DmaDone:1;
-		UINT32       	Ac2DmaDone:1;
-		UINT32       	Ac3DmaDone:1;
-		UINT32       	HccaDmaDone:1; // bit7
-		UINT32       	MgmtDmaDone:1;
-		UINT32       	MCUCommandINT:1;//bit 9
-		UINT32       	RxTxCoherent:1;
-		UINT32       	TBTTInt:1;
-		UINT32       	PreTBTT:1;
-		UINT32       	TXFifoStatusInt:1;//FIFO Statistics is full, sw should read 0x171c
-		UINT32       	AutoWakeup:1;//bit14
-		UINT32       	GPTimer:1;
-		UINT32       	RxCoherent:1;//bit16
-		UINT32       	TxCoherent:1;
-		UINT32       	:14;
-	}	field;
-	UINT32			word;
-} INT_SOURCE_CSR_STRUC, *PINT_SOURCE_CSR_STRUC;
-#endif
-
-//
-// INT_MASK_CSR:   Interrupt MASK register.   1: the interrupt is mask OFF
-//
-#define INT_MASK_CSR        0x204
-#ifdef RT_BIG_ENDIAN
-typedef	union	_INT_MASK_CSR_STRUC	{
-	struct	{
-		UINT32       	TxCoherent:1;
-		UINT32       	RxCoherent:1;
-		UINT32       	:20;
-		UINT32       	MCUCommandINT:1;
-		UINT32       	MgmtDmaDone:1;
-		UINT32       	HccaDmaDone:1;
-		UINT32       	Ac3DmaDone:1;
-		UINT32       	Ac2DmaDone:1;
-		UINT32       	Ac1DmaDone:1;
-		UINT32		Ac0DmaDone:1;
-		UINT32		RxDone:1;
-		UINT32		TxDelay:1;
-		UINT32		RXDelay_INT_MSK:1;
-	}	field;
-	UINT32			word;
-}INT_MASK_CSR_STRUC, *PINT_MASK_CSR_STRUC;
-#else
-typedef	union	_INT_MASK_CSR_STRUC	{
-	struct	{
-		UINT32		RXDelay_INT_MSK:1;
-		UINT32		TxDelay:1;
-		UINT32		RxDone:1;
-		UINT32		Ac0DmaDone:1;
-		UINT32       	Ac1DmaDone:1;
-		UINT32       	Ac2DmaDone:1;
-		UINT32       	Ac3DmaDone:1;
-		UINT32       	HccaDmaDone:1;
-		UINT32       	MgmtDmaDone:1;
-		UINT32       	MCUCommandINT:1;
-		UINT32       	:20;
-		UINT32       	RxCoherent:1;
-		UINT32       	TxCoherent:1;
-	}	field;
-	UINT32			word;
-} INT_MASK_CSR_STRUC, *PINT_MASK_CSR_STRUC;
-#endif
-#define WPDMA_GLO_CFG 	0x208
-#ifdef RT_BIG_ENDIAN
-typedef	union	_WPDMA_GLO_CFG_STRUC	{
-	struct	{
-		UINT32       	HDR_SEG_LEN:16;
-		UINT32       	RXHdrScater:8;
-		UINT32       	BigEndian:1;
-		UINT32       	EnTXWriteBackDDONE:1;
-		UINT32       	WPDMABurstSIZE:2;
-		UINT32		RxDMABusy:1;
-		UINT32		EnableRxDMA:1;
-		UINT32		TxDMABusy:1;
-		UINT32		EnableTxDMA:1;
-	}	field;
-	UINT32			word;
-}WPDMA_GLO_CFG_STRUC, *PWPDMA_GLO_CFG_STRUC;
-#else
-typedef	union	_WPDMA_GLO_CFG_STRUC	{
-	struct	{
-		UINT32		EnableTxDMA:1;
-		UINT32		TxDMABusy:1;
-		UINT32		EnableRxDMA:1;
-		UINT32		RxDMABusy:1;
-		UINT32       	WPDMABurstSIZE:2;
-		UINT32       	EnTXWriteBackDDONE:1;
-		UINT32       	BigEndian:1;
-		UINT32       	RXHdrScater:8;
-		UINT32       	HDR_SEG_LEN:16;
-	}	field;
-	UINT32			word;
-} WPDMA_GLO_CFG_STRUC, *PWPDMA_GLO_CFG_STRUC;
-#endif
-#define WPDMA_RST_IDX 	0x20c
-#ifdef RT_BIG_ENDIAN
-typedef	union	_WPDMA_RST_IDX_STRUC	{
-	struct	{
-		UINT32       	:15;
-		UINT32       	RST_DRX_IDX0:1;
-		UINT32       	rsv:10;
-		UINT32       	RST_DTX_IDX5:1;
-		UINT32       	RST_DTX_IDX4:1;
-		UINT32		RST_DTX_IDX3:1;
-		UINT32		RST_DTX_IDX2:1;
-		UINT32		RST_DTX_IDX1:1;
-		UINT32		RST_DTX_IDX0:1;
-	}	field;
-	UINT32			word;
-}WPDMA_RST_IDX_STRUC, *PWPDMA_RST_IDX_STRUC;
-#else
-typedef	union	_WPDMA_RST_IDX_STRUC	{
-	struct	{
-		UINT32		RST_DTX_IDX0:1;
-		UINT32		RST_DTX_IDX1:1;
-		UINT32		RST_DTX_IDX2:1;
-		UINT32		RST_DTX_IDX3:1;
-		UINT32       	RST_DTX_IDX4:1;
-		UINT32       	RST_DTX_IDX5:1;
-		UINT32       	rsv:10;
-		UINT32       	RST_DRX_IDX0:1;
-		UINT32       	:15;
-	}	field;
-	UINT32			word;
-} WPDMA_RST_IDX_STRUC, *PWPDMA_RST_IDX_STRUC;
-#endif
-#define DELAY_INT_CFG  0x0210
-#ifdef RT_BIG_ENDIAN
-typedef	union	_DELAY_INT_CFG_STRUC	{
-	struct	{
-		UINT32       	TXDLY_INT_EN:1;
-		UINT32       	TXMAX_PINT:7;
-		UINT32       	TXMAX_PTIME:8;
-		UINT32       	RXDLY_INT_EN:1;
-		UINT32       	RXMAX_PINT:7;
-		UINT32		RXMAX_PTIME:8;
-	}	field;
-	UINT32			word;
-}DELAY_INT_CFG_STRUC, *PDELAY_INT_CFG_STRUC;
-#else
-typedef	union	_DELAY_INT_CFG_STRUC	{
-	struct	{
-		UINT32		RXMAX_PTIME:8;
-		UINT32       	RXMAX_PINT:7;
-		UINT32       	RXDLY_INT_EN:1;
-		UINT32       	TXMAX_PTIME:8;
-		UINT32       	TXMAX_PINT:7;
-		UINT32       	TXDLY_INT_EN:1;
-	}	field;
-	UINT32			word;
-} DELAY_INT_CFG_STRUC, *PDELAY_INT_CFG_STRUC;
-#endif
-#define WMM_AIFSN_CFG   0x0214
-#ifdef RT_BIG_ENDIAN
-typedef	union	_AIFSN_CSR_STRUC	{
-	struct	{
-	    UINT32   Rsv:16;
-	    UINT32   Aifsn3:4;       // for AC_VO
-	    UINT32   Aifsn2:4;       // for AC_VI
-	    UINT32   Aifsn1:4;       // for AC_BK
-	    UINT32   Aifsn0:4;       // for AC_BE
-	}	field;
-	UINT32			word;
-}	AIFSN_CSR_STRUC, *PAIFSN_CSR_STRUC;
-#else
-typedef	union	_AIFSN_CSR_STRUC	{
-	struct	{
-	    UINT32   Aifsn0:4;       // for AC_BE
-	    UINT32   Aifsn1:4;       // for AC_BK
-	    UINT32   Aifsn2:4;       // for AC_VI
-	    UINT32   Aifsn3:4;       // for AC_VO
-	    UINT32   Rsv:16;
-	}	field;
-	UINT32			word;
-}	AIFSN_CSR_STRUC, *PAIFSN_CSR_STRUC;
-#endif
-//
-// CWMIN_CSR: CWmin for each EDCA AC
-//
-#define WMM_CWMIN_CFG   0x0218
-#ifdef RT_BIG_ENDIAN
-typedef	union	_CWMIN_CSR_STRUC	{
-	struct	{
-	    UINT32   Rsv:16;
-	    UINT32   Cwmin3:4;       // for AC_VO
-	    UINT32   Cwmin2:4;       // for AC_VI
-	    UINT32   Cwmin1:4;       // for AC_BK
-	    UINT32   Cwmin0:4;       // for AC_BE
-	}	field;
-	UINT32			word;
-}	CWMIN_CSR_STRUC, *PCWMIN_CSR_STRUC;
-#else
-typedef	union	_CWMIN_CSR_STRUC	{
-	struct	{
-	    UINT32   Cwmin0:4;       // for AC_BE
-	    UINT32   Cwmin1:4;       // for AC_BK
-	    UINT32   Cwmin2:4;       // for AC_VI
-	    UINT32   Cwmin3:4;       // for AC_VO
-	    UINT32   Rsv:16;
-	}	field;
-	UINT32			word;
-}	CWMIN_CSR_STRUC, *PCWMIN_CSR_STRUC;
-#endif
-
-//
-// CWMAX_CSR: CWmin for each EDCA AC
-//
-#define WMM_CWMAX_CFG   0x021c
-#ifdef RT_BIG_ENDIAN
-typedef	union	_CWMAX_CSR_STRUC	{
-	struct	{
-	    UINT32   Rsv:16;
-	    UINT32   Cwmax3:4;       // for AC_VO
-	    UINT32   Cwmax2:4;       // for AC_VI
-	    UINT32   Cwmax1:4;       // for AC_BK
-	    UINT32   Cwmax0:4;       // for AC_BE
-	}	field;
-	UINT32			word;
-}	CWMAX_CSR_STRUC, *PCWMAX_CSR_STRUC;
-#else
-typedef	union	_CWMAX_CSR_STRUC	{
-	struct	{
-	    UINT32   Cwmax0:4;       // for AC_BE
-	    UINT32   Cwmax1:4;       // for AC_BK
-	    UINT32   Cwmax2:4;       // for AC_VI
-	    UINT32   Cwmax3:4;       // for AC_VO
-	    UINT32   Rsv:16;
-	}	field;
-	UINT32			word;
-}	CWMAX_CSR_STRUC, *PCWMAX_CSR_STRUC;
-#endif
-
-
-//
-// AC_TXOP_CSR0: AC_BK/AC_BE TXOP register
-//
-#define WMM_TXOP0_CFG    0x0220
-#ifdef RT_BIG_ENDIAN
-typedef	union	_AC_TXOP_CSR0_STRUC	{
-	struct	{
-	    USHORT  Ac1Txop;        // for AC_BE, in unit of 32us
-	    USHORT  Ac0Txop;        // for AC_BK, in unit of 32us
-	}	field;
-	UINT32			word;
-}	AC_TXOP_CSR0_STRUC, *PAC_TXOP_CSR0_STRUC;
-#else
-typedef	union	_AC_TXOP_CSR0_STRUC	{
-	struct	{
-	    USHORT  Ac0Txop;        // for AC_BK, in unit of 32us
-	    USHORT  Ac1Txop;        // for AC_BE, in unit of 32us
-	}	field;
-	UINT32			word;
-}	AC_TXOP_CSR0_STRUC, *PAC_TXOP_CSR0_STRUC;
-#endif
-
-//
-// AC_TXOP_CSR1: AC_VO/AC_VI TXOP register
-//
-#define WMM_TXOP1_CFG    0x0224
-#ifdef RT_BIG_ENDIAN
-typedef	union	_AC_TXOP_CSR1_STRUC	{
-	struct	{
-	    USHORT  Ac3Txop;        // for AC_VO, in unit of 32us
-	    USHORT  Ac2Txop;        // for AC_VI, in unit of 32us
-	}	field;
-	UINT32			word;
-}	AC_TXOP_CSR1_STRUC, *PAC_TXOP_CSR1_STRUC;
-#else
-typedef	union	_AC_TXOP_CSR1_STRUC	{
-	struct	{
-	    USHORT  Ac2Txop;        // for AC_VI, in unit of 32us
-	    USHORT  Ac3Txop;        // for AC_VO, in unit of 32us
-	}	field;
-	UINT32			word;
-}	AC_TXOP_CSR1_STRUC, *PAC_TXOP_CSR1_STRUC;
-#endif
-#define RINGREG_DIFF			0x10
-#define GPIO_CTRL_CFG    0x0228	//MAC_CSR13
-#define MCU_CMD_CFG    0x022c
-#define TX_BASE_PTR0     0x0230	//AC_BK base address
-#define TX_MAX_CNT0      0x0234
-#define TX_CTX_IDX0       0x0238
-#define TX_DTX_IDX0      0x023c
-#define TX_BASE_PTR1     0x0240 	//AC_BE base address
-#define TX_MAX_CNT1      0x0244
-#define TX_CTX_IDX1       0x0248
-#define TX_DTX_IDX1      0x024c
-#define TX_BASE_PTR2     0x0250 	//AC_VI base address
-#define TX_MAX_CNT2      0x0254
-#define TX_CTX_IDX2       0x0258
-#define TX_DTX_IDX2      0x025c
-#define TX_BASE_PTR3     0x0260 	//AC_VO base address
-#define TX_MAX_CNT3      0x0264
-#define TX_CTX_IDX3       0x0268
-#define TX_DTX_IDX3      0x026c
-#define TX_BASE_PTR4     0x0270 	//HCCA base address
-#define TX_MAX_CNT4      0x0274
-#define TX_CTX_IDX4       0x0278
-#define TX_DTX_IDX4      0x027c
-#define TX_BASE_PTR5     0x0280 	//MGMT base address
-#define  TX_MAX_CNT5     0x0284
-#define TX_CTX_IDX5       0x0288
-#define TX_DTX_IDX5      0x028c
-#define TX_MGMTMAX_CNT      TX_MAX_CNT5
-#define TX_MGMTCTX_IDX       TX_CTX_IDX5
-#define TX_MGMTDTX_IDX      TX_DTX_IDX5
-#define RX_BASE_PTR     0x0290 	//RX base address
-#define RX_MAX_CNT      0x0294
-#define RX_CRX_IDX       0x0298
-#define RX_DRX_IDX      0x029c
-#define USB_DMA_CFG      0x02a0
-#ifdef RT_BIG_ENDIAN
-typedef	union	_USB_DMA_CFG_STRUC	{
-	struct	{
-	    UINT32  TxBusy:1;   	//USB DMA TX FSM busy . debug only
-	    UINT32  RxBusy:1;        //USB DMA RX FSM busy . debug only
-	    UINT32  EpoutValid:6;        //OUT endpoint data valid. debug only
-	    UINT32  TxBulkEn:1;        //Enable USB DMA Tx
-	    UINT32  RxBulkEn:1;        //Enable USB DMA Rx
-	    UINT32  RxBulkAggEn:1;        //Enable Rx Bulk Aggregation
-	    UINT32  TxopHalt:1;        //Halt TXOP count down when TX buffer is full.
-	    UINT32  TxClear:1;        //Clear USB DMA TX path
-	    UINT32  rsv:2;
-	    UINT32  phyclear:1;        		//phy watch dog enable. write 1
-	    UINT32  RxBulkAggLmt:8;        //Rx Bulk Aggregation Limit  in unit of 1024 bytes
-	    UINT32  RxBulkAggTOut:8;        //Rx Bulk Aggregation TimeOut  in unit of 33ns
-	}	field;
-	UINT32			word;
-}	USB_DMA_CFG_STRUC, *PUSB_DMA_CFG_STRUC;
-#else
-typedef	union	_USB_DMA_CFG_STRUC	{
-	struct	{
-	    UINT32  RxBulkAggTOut:8;        //Rx Bulk Aggregation TimeOut  in unit of 33ns
-	    UINT32  RxBulkAggLmt:8;        //Rx Bulk Aggregation Limit  in unit of 256 bytes
-	    UINT32  phyclear:1;        		//phy watch dog enable. write 1
-	    UINT32  rsv:2;
-	    UINT32  TxClear:1;        //Clear USB DMA TX path
-	    UINT32  TxopHalt:1;        //Halt TXOP count down when TX buffer is full.
-	    UINT32  RxBulkAggEn:1;        //Enable Rx Bulk Aggregation
-	    UINT32  RxBulkEn:1;        //Enable USB DMA Rx
-	    UINT32  TxBulkEn:1;        //Enable USB DMA Tx
-	    UINT32  EpoutValid:6;        //OUT endpoint data valid
-	    UINT32  RxBusy:1;        //USB DMA RX FSM busy
-	    UINT32  TxBusy:1;   	//USB DMA TX FSM busy
-	}	field;
-	UINT32			word;
-}	USB_DMA_CFG_STRUC, *PUSB_DMA_CFG_STRUC;
-#endif
-
-//
-//  3  PBF  registers
-//
-//
-// Most are for debug. Driver doesn't touch PBF register.
-#define 	PBF_SYS_CTRL 	 0x0400
-#define     PBF_CFG                 0x0408
-#define 	PBF_MAX_PCNT 	 0x040C
-#define 	PBF_CTRL	 	0x0410
-#define 	PBF_INT_STA	 0x0414
-#define 	PBF_INT_ENA	 0x0418
-#define 	TXRXQ_PCNT  	 0x0438
-#define 	PBF_DBG 	 	 0x043c
-#define     PBF_CAP_CTRL     0x0440
-
-//
-//  4  MAC  registers
-//
-//
-//  4.1 MAC SYSTEM  configuration registers (offset:0x1000)
-//
-#define MAC_CSR0            0x1000
-#ifdef RT_BIG_ENDIAN
-typedef	union	_ASIC_VER_ID_STRUC	{
-	struct	{
-	    USHORT  ASICVer;        // version : 2860
-	    USHORT  ASICRev;        // reversion  : 0
-	}	field;
-	UINT32			word;
-}	ASIC_VER_ID_STRUC, *PASIC_VER_ID_STRUC;
-#else
-typedef	union	_ASIC_VER_ID_STRUC	{
-	struct	{
-	    USHORT  ASICRev;        // reversion  : 0
-	    USHORT  ASICVer;        // version : 2860
-	}	field;
-	UINT32			word;
-}	ASIC_VER_ID_STRUC, *PASIC_VER_ID_STRUC;
-#endif
-#define MAC_SYS_CTRL            0x1004		//MAC_CSR1
-#define MAC_ADDR_DW0            		0x1008		// MAC ADDR DW0
-#define MAC_ADDR_DW1           		 0x100c		// MAC ADDR DW1
-//
-// MAC_CSR2: STA MAC register 0
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_MAC_DW0_STRUC	{
-	struct	{
-		UCHAR		Byte3;		// MAC address byte 3
-		UCHAR		Byte2;		// MAC address byte 2
-		UCHAR		Byte1;		// MAC address byte 1
-		UCHAR		Byte0;		// MAC address byte 0
-	}	field;
-	UINT32			word;
-}	MAC_DW0_STRUC, *PMAC_DW0_STRUC;
-#else
-typedef	union	_MAC_DW0_STRUC	{
-	struct	{
-		UCHAR		Byte0;		// MAC address byte 0
-		UCHAR		Byte1;		// MAC address byte 1
-		UCHAR		Byte2;		// MAC address byte 2
-		UCHAR		Byte3;		// MAC address byte 3
-	}	field;
-	UINT32			word;
-}	MAC_DW0_STRUC, *PMAC_DW0_STRUC;
-#endif
-
-//
-// MAC_CSR3: STA MAC register 1
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_MAC_DW1_STRUC	{
-	struct	{
-		UCHAR		Rsvd1;
-		UCHAR		U2MeMask;
-		UCHAR		Byte5;		// MAC address byte 5
-		UCHAR		Byte4;		// MAC address byte 4
-	}	field;
-	UINT32			word;
-}	MAC_DW1_STRUC, *PMAC_DW1_STRUC;
-#else
-typedef	union	_MAC_DW1_STRUC	{
-	struct	{
-		UCHAR		Byte4;		// MAC address byte 4
-		UCHAR		Byte5;		// MAC address byte 5
-		UCHAR		U2MeMask;
-		UCHAR		Rsvd1;
-	}	field;
-	UINT32			word;
-}	MAC_DW1_STRUC, *PMAC_DW1_STRUC;
-#endif
-
-#define MAC_BSSID_DW0            		0x1010		// MAC BSSID DW0
-#define MAC_BSSID_DW1            		0x1014		// MAC BSSID DW1
-
-//
-// MAC_CSR5: BSSID register 1
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_MAC_CSR5_STRUC	{
-	struct	{
-		USHORT		Rsvd:11;
-		USHORT		MBssBcnNum:3;
-		USHORT		BssIdMode:2; // 0: one BSSID, 10: 4 BSSID,  01: 2 BSSID , 11: 8BSSID
-		UCHAR		Byte5;		 // BSSID byte 5
-		UCHAR		Byte4;		 // BSSID byte 4
-	}	field;
-	UINT32			word;
-}	MAC_CSR5_STRUC, *PMAC_CSR5_STRUC;
-#else
-typedef	union	_MAC_CSR5_STRUC	{
-	struct	{
-		UCHAR		Byte4;		 // BSSID byte 4
-		UCHAR		Byte5;		 // BSSID byte 5
-		USHORT      	BssIdMask:2; // 0: one BSSID, 10: 4 BSSID,  01: 2 BSSID , 11: 8BSSID
-		USHORT		MBssBcnNum:3;
-		USHORT		Rsvd:11;
-	}	field;
-	UINT32			word;
-}	MAC_CSR5_STRUC, *PMAC_CSR5_STRUC;
-#endif
-
-#define MAX_LEN_CFG              0x1018		// rt2860b max 16k bytes. bit12:13 Maximum PSDU length (power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16
-#define BBP_CSR_CFG            		0x101c		//
-//
-// BBP_CSR_CFG: BBP serial control register
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_BBP_CSR_CFG_STRUC	{
-	struct	{
-		UINT32		:12;
-		UINT32		BBP_RW_MODE:1;		// 0: use serial mode  1:parallel
-		UINT32		BBP_PAR_DUR:1;		    // 0: 4 MAC clock cycles  1: 8 MAC clock cycles
-		UINT32		Busy:1;				// 1: ASIC is busy execute BBP programming.
-		UINT32		fRead:1;		    // 0: Write	BBP, 1:	Read BBP
-		UINT32		RegNum:8;			// Selected	BBP	register
-		UINT32		Value:8;			// Register	value to program into BBP
-	}	field;
-	UINT32			word;
-}	BBP_CSR_CFG_STRUC, *PBBP_CSR_CFG_STRUC;
-#else
-typedef	union	_BBP_CSR_CFG_STRUC	{
-	struct	{
-		UINT32		Value:8;			// Register	value to program into BBP
-		UINT32		RegNum:8;			// Selected	BBP	register
-		UINT32		fRead:1;		    // 0: Write	BBP, 1:	Read BBP
-		UINT32		Busy:1;				// 1: ASIC is busy execute BBP programming.
-		UINT32		BBP_PAR_DUR:1;		     // 0: 4 MAC clock cycles  1: 8 MAC clock cycles
-		UINT32		BBP_RW_MODE:1;		// 0: use serial mode  1:parallel
-		UINT32		:12;
-	}	field;
-	UINT32			word;
-}	BBP_CSR_CFG_STRUC, *PBBP_CSR_CFG_STRUC;
-#endif
-#define RF_CSR_CFG0            		0x1020
-//
-// RF_CSR_CFG: RF control register
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_RF_CSR_CFG0_STRUC	{
-	struct	{
-		UINT32		Busy:1;		    // 0: idle 1: 8busy
-		UINT32		Sel:1;				// 0:RF_LE0 activate  1:RF_LE1 activate
-		UINT32		StandbyMode:1;		    // 0: high when stand by 1:	low when standby
-		UINT32		bitwidth:5;			// Selected	BBP	register
-		UINT32		RegIdAndContent:24;			// Register	value to program into BBP
-	}	field;
-	UINT32			word;
-}	RF_CSR_CFG0_STRUC, *PRF_CSR_CFG0_STRUC;
-#else
-typedef	union	_RF_CSR_CFG0_STRUC	{
-	struct	{
-		UINT32		RegIdAndContent:24;			// Register	value to program into BBP
-		UINT32		bitwidth:5;			// Selected	BBP	register
-		UINT32		StandbyMode:1;		    // 0: high when stand by 1:	low when standby
-		UINT32		Sel:1;				// 0:RF_LE0 activate  1:RF_LE1 activate
-		UINT32		Busy:1;		    // 0: idle 1: 8busy
-	}	field;
-	UINT32			word;
-}	RF_CSR_CFG0_STRUC, *PRF_CSR_CFG0_STRUC;
-#endif
-#define RF_CSR_CFG1           		0x1024
-#ifdef RT_BIG_ENDIAN
-typedef	union	_RF_CSR_CFG1_STRUC	{
-	struct	{
-		UINT32		rsv:7;		    // 0: idle 1: 8busy
-		UINT32		RFGap:5;			// Gap between BB_CONTROL_RF and RF_LE. 0: 3 system clock cycle (37.5usec) 1: 5 system clock cycle (62.5usec)
-		UINT32		RegIdAndContent:24;			// Register	value to program into BBP
-	}	field;
-	UINT32			word;
-}	RF_CSR_CFG1_STRUC, *PRF_CSR_CFG1_STRUC;
-#else
-typedef	union	_RF_CSR_CFG1_STRUC	{
-	struct	{
-		UINT32		RegIdAndContent:24;			// Register	value to program into BBP
-		UINT32		RFGap:5;			// Gap between BB_CONTROL_RF and RF_LE. 0: 3 system clock cycle (37.5usec) 1: 5 system clock cycle (62.5usec)
-		UINT32		rsv:7;		    // 0: idle 1: 8busy
-	}	field;
-	UINT32			word;
-}	RF_CSR_CFG1_STRUC, *PRF_CSR_CFG1_STRUC;
-#endif
-#define RF_CSR_CFG2           		0x1028		//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_RF_CSR_CFG2_STRUC	{
-	struct	{
-		UINT32		rsv:8;		    // 0: idle 1: 8busy
-		UINT32		RegIdAndContent:24;			// Register	value to program into BBP
-	}	field;
-	UINT32			word;
-}	RF_CSR_CFG2_STRUC, *PRF_CSR_CFG2_STRUC;
-#else
-typedef	union	_RF_CSR_CFG2_STRUC	{
-	struct	{
-		UINT32		RegIdAndContent:24;			// Register	value to program into BBP
-		UINT32		rsv:8;		    // 0: idle 1: 8busy
-	}	field;
-	UINT32			word;
-}	RF_CSR_CFG2_STRUC, *PRF_CSR_CFG2_STRUC;
-#endif
-#define LED_CFG           		0x102c		//  MAC_CSR14
-#ifdef RT_BIG_ENDIAN
-typedef	union	_LED_CFG_STRUC	{
-	struct	{
-		UINT32		:1;
-		UINT32		LedPolar:1;			// Led Polarity.  0: active low1: active high
-		UINT32		YLedMode:2;			// yellow Led Mode
-		UINT32		GLedMode:2;			// green Led Mode
-		UINT32		RLedMode:2;			// red Led Mode    0: off1: blinking upon TX2: periodic slow blinking3: always on
-		UINT32		rsv:2;
-		UINT32		SlowBlinkPeriod:6;			// slow blinking period. unit:1ms
-		UINT32		OffPeriod:8;			// blinking off period unit 1ms
-		UINT32		OnPeriod:8;			// blinking on period unit 1ms
-	}	field;
-	UINT32			word;
-}	LED_CFG_STRUC, *PLED_CFG_STRUC;
-#else
-typedef	union	_LED_CFG_STRUC	{
-	struct	{
-		UINT32		OnPeriod:8;			// blinking on period unit 1ms
-		UINT32		OffPeriod:8;			// blinking off period unit 1ms
-		UINT32		SlowBlinkPeriod:6;			// slow blinking period. unit:1ms
-		UINT32		rsv:2;
-		UINT32		RLedMode:2;			// red Led Mode    0: off1: blinking upon TX2: periodic slow blinking3: always on
-		UINT32		GLedMode:2;			// green Led Mode
-		UINT32		YLedMode:2;			// yellow Led Mode
-		UINT32		LedPolar:1;			// Led Polarity.  0: active low1: active high
-		UINT32		:1;
-	}	field;
-	UINT32			word;
-}	LED_CFG_STRUC, *PLED_CFG_STRUC;
-#endif
-//
-//  4.2 MAC TIMING  configuration registers (offset:0x1100)
-//
-#define XIFS_TIME_CFG             0x1100		 // MAC_CSR8  MAC_CSR9
-#ifdef RT_BIG_ENDIAN
-typedef	union	_IFS_SLOT_CFG_STRUC	{
-	struct	{
-	    UINT32  rsv:2;
-	    UINT32  BBRxendEnable:1;        //  reference RXEND signal to begin XIFS defer
-	    UINT32  EIFS:9;        //  unit 1us
-	    UINT32  OfdmXifsTime:4;        //OFDM SIFS. unit 1us. Applied after OFDM RX when MAC doesn't reference BBP signal BBRXEND
-	    UINT32  OfdmSifsTime:8;        //  unit 1us. Applied after OFDM RX/TX
-	    UINT32  CckmSifsTime:8;        //  unit 1us. Applied after CCK RX/TX
-	}	field;
-	UINT32			word;
-}	IFS_SLOT_CFG_STRUC, *PIFS_SLOT_CFG_STRUC;
-#else
-typedef	union	_IFS_SLOT_CFG_STRUC	{
-	struct	{
-	    UINT32  CckmSifsTime:8;        //  unit 1us. Applied after CCK RX/TX
-	    UINT32  OfdmSifsTime:8;        //  unit 1us. Applied after OFDM RX/TX
-	    UINT32  OfdmXifsTime:4;        //OFDM SIFS. unit 1us. Applied after OFDM RX when MAC doesn't reference BBP signal BBRXEND
-	    UINT32  EIFS:9;        //  unit 1us
-	    UINT32  BBRxendEnable:1;        //  reference RXEND signal to begin XIFS defer
-	    UINT32  rsv:2;
-	}	field;
-	UINT32			word;
-}	IFS_SLOT_CFG_STRUC, *PIFS_SLOT_CFG_STRUC;
-#endif
-
-#define BKOFF_SLOT_CFG             0x1104		 //  mac_csr9 last 8 bits
-#define NAV_TIME_CFG             0x1108		 // NAV  (MAC_CSR15)
-#define CH_TIME_CFG             0x110C		 	// Count as channel busy
-#define PBF_LIFE_TIMER             0x1110		 //TX/RX MPDU timestamp timer (free run)Unit: 1us
-#define BCN_TIME_CFG             0x1114		 // TXRX_CSR9
-
-#define BCN_OFFSET0				0x042C
-#define BCN_OFFSET1				0x0430
-
-//
-// BCN_TIME_CFG : Synchronization control register
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_BCN_TIME_CFG_STRUC	{
-	struct	{
-		UINT32		TxTimestampCompensate:8;
-        UINT32       :3;
-		UINT32		bBeaconGen:1;		// Enable beacon generator
-        UINT32       bTBTTEnable:1;
-		UINT32		TsfSyncMode:2;		// Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode
-		UINT32		bTsfTicking:1;		// Enable TSF auto counting
-		UINT32       BeaconInterval:16;  // in unit of 1/16 TU
-	}	field;
-	UINT32			word;
-}	BCN_TIME_CFG_STRUC, *PBCN_TIME_CFG_STRUC;
-#else
-typedef	union	_BCN_TIME_CFG_STRUC	{
-	struct	{
-		UINT32       BeaconInterval:16;  // in unit of 1/16 TU
-		UINT32		bTsfTicking:1;		// Enable TSF auto counting
-		UINT32		TsfSyncMode:2;		// Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode
-        UINT32       bTBTTEnable:1;
-		UINT32		bBeaconGen:1;		// Enable beacon generator
-        UINT32       :3;
-		UINT32		TxTimestampCompensate:8;
-	}	field;
-	UINT32			word;
-}	BCN_TIME_CFG_STRUC, *PBCN_TIME_CFG_STRUC;
-#endif
-#define TBTT_SYNC_CFG            0x1118  		// txrx_csr10
-#define TSF_TIMER_DW0             0x111C  		// Local TSF timer lsb 32 bits. Read-only
-#define TSF_TIMER_DW1             0x1120  		// msb 32 bits. Read-only.
-#define TBTT_TIMER             	0x1124  		// TImer remains till next TBTT. Read-only.  TXRX_CSR14
-#define INT_TIMER_CFG              	0x1128  		//
-#define INT_TIMER_EN             	0x112c  		//  GP-timer and pre-tbtt Int enable
-#define CH_IDLE_STA              	0x1130  		//  channel idle time
-#define CH_BUSY_STA              	0x1134  		//  channle busy time
-//
-//  4.2 MAC POWER  configuration registers (offset:0x1200)
-//
-#define MAC_STATUS_CFG             0x1200		 // old MAC_CSR12
-#define PWR_PIN_CFG             0x1204		 // old MAC_CSR12
-#define AUTO_WAKEUP_CFG             0x1208		 // old MAC_CSR10
-//
-// AUTO_WAKEUP_CFG: Manual power control / status register
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_AUTO_WAKEUP_STRUC	{
-	struct	{
-		UINT32		:16;
-		UINT32		EnableAutoWakeup:1;	// 0:sleep, 1:awake
-		UINT32       NumofSleepingTbtt:7;          // ForceWake has high privilege than PutToSleep when both set
-		UINT32       AutoLeadTime:8;
-	}	field;
-	UINT32			word;
-}	AUTO_WAKEUP_STRUC, *PAUTO_WAKEUP_STRUC;
-#else
-typedef	union	_AUTO_WAKEUP_STRUC	{
-	struct	{
-		UINT32       AutoLeadTime:8;
-		UINT32       NumofSleepingTbtt:7;          // ForceWake has high privilege than PutToSleep when both set
-		UINT32		EnableAutoWakeup:1;	// 0:sleep, 1:awake
-		UINT32		:16;
-	}	field;
-	UINT32			word;
-}	AUTO_WAKEUP_STRUC, *PAUTO_WAKEUP_STRUC;
-#endif
-//
-//  4.3 MAC TX  configuration registers (offset:0x1300)
-//
-
-#define EDCA_AC0_CFG	0x1300		//AC_TXOP_CSR0 0x3474
-#define EDCA_AC1_CFG	0x1304
-#define EDCA_AC2_CFG	0x1308
-#define EDCA_AC3_CFG	0x130c
-#ifdef RT_BIG_ENDIAN
-typedef	union	_EDCA_AC_CFG_STRUC	{
-	struct	{
-	    UINT32  :12;        //
-	    UINT32  Cwmax:4;        //unit power of 2
-	    UINT32  Cwmin:4;        //
-	    UINT32  Aifsn:4;        // # of slot time
-	    UINT32  AcTxop:8;        //  in unit of 32us
-	}	field;
-	UINT32			word;
-}	EDCA_AC_CFG_STRUC, *PEDCA_AC_CFG_STRUC;
-#else
-typedef	union	_EDCA_AC_CFG_STRUC	{
-	struct	{
-	    UINT32  AcTxop:8;        //  in unit of 32us
-	    UINT32  Aifsn:4;        // # of slot time
-	    UINT32  Cwmin:4;        //
-	    UINT32  Cwmax:4;        //unit power of 2
-	    UINT32  :12;       //
-	}	field;
-	UINT32			word;
-}	EDCA_AC_CFG_STRUC, *PEDCA_AC_CFG_STRUC;
-#endif
-
-#define EDCA_TID_AC_MAP	0x1310
-#define TX_PWR_CFG_0	0x1314
-#define TX_PWR_CFG_1	0x1318
-#define TX_PWR_CFG_2	0x131C
-#define TX_PWR_CFG_3	0x1320
-#define TX_PWR_CFG_4	0x1324
-#define TX_PIN_CFG		0x1328
-#define TX_BAND_CFG	0x132c		// 0x1 use upper 20MHz. 0 juse lower 20MHz
-#define TX_SW_CFG0		0x1330
-#define TX_SW_CFG1		0x1334
-#define TX_SW_CFG2		0x1338
-#define TXOP_THRES_CFG		0x133c
-#define TXOP_CTRL_CFG		0x1340
-#define TX_RTS_CFG		0x1344
-
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_RTS_CFG_STRUC	{
-	struct	{
-	    UINT32       rsv:7;
-	    UINT32       RtsFbkEn:1;    // enable rts rate fallback
-	    UINT32       RtsThres:16;    // unit:byte
-	    UINT32       AutoRtsRetryLimit:8;
-	}	field;
-	UINT32			word;
-}	TX_RTS_CFG_STRUC, *PTX_RTS_CFG_STRUC;
-#else
-typedef	union	_TX_RTS_CFG_STRUC	{
-	struct	{
-	    UINT32       AutoRtsRetryLimit:8;
-	    UINT32       RtsThres:16;    // unit:byte
-	    UINT32       RtsFbkEn:1;    // enable rts rate fallback
-	    UINT32       rsv:7;     // 1: HT non-STBC control frame enable
-	}	field;
-	UINT32			word;
-}	TX_RTS_CFG_STRUC, *PTX_RTS_CFG_STRUC;
-#endif
-#define TX_TIMEOUT_CFG	0x1348
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_TIMEOUT_CFG_STRUC	{
-	struct	{
-	    UINT32       rsv2:8;
-	    UINT32       TxopTimeout:8;	//TXOP timeout value for TXOP truncation.  It is recommended that (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT)
-	    UINT32       RxAckTimeout:8;	// unit:slot. Used for TX precedure
-	    UINT32       MpduLifeTime:4;    //  expiration time = 2^(9+MPDU LIFE TIME)  us
-	    UINT32       rsv:4;
-	}	field;
-	UINT32			word;
-}	TX_TIMEOUT_CFG_STRUC, *PTX_TIMEOUT_CFG_STRUC;
-#else
-typedef	union	_TX_TIMEOUT_CFG_STRUC	{
-	struct	{
-	    UINT32       rsv:4;
-	    UINT32       MpduLifeTime:4;    //  expiration time = 2^(9+MPDU LIFE TIME)  us
-	    UINT32       RxAckTimeout:8;	// unit:slot. Used for TX precedure
-	    UINT32       TxopTimeout:8;	//TXOP timeout value for TXOP truncation.  It is recommended that (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT)
-	    UINT32       rsv2:8;     // 1: HT non-STBC control frame enable
-	}	field;
-	UINT32			word;
-}	TX_TIMEOUT_CFG_STRUC, *PTX_TIMEOUT_CFG_STRUC;
-#endif
-#define TX_RTY_CFG	0x134c
-#ifdef RT_BIG_ENDIAN
-typedef	union PACKED _TX_RTY_CFG_STRUC	{
-	struct	{
-	    UINT32       rsv:1;
-	    UINT32       TxautoFBEnable:1;    // Tx retry PHY rate auto fallback enable
-	    UINT32       AggRtyMode:1;	// Aggregate MPDU retry mode.  0:expired by retry limit, 1: expired by mpdu life timer
-	    UINT32       NonAggRtyMode:1;	// Non-Aggregate MPDU retry mode.  0:expired by retry limit, 1: expired by mpdu life timer
-	    UINT32       LongRtyThre:12;	// Long retry threshoold
-	    UINT32       LongRtyLimit:8;	//long retry limit
-	    UINT32       ShortRtyLimit:8;	//  short retry limit
-
-	}	field;
-	UINT32			word;
-}	TX_RTY_CFG_STRUC, *PTX_RTY_CFG_STRUC;
-#else
-typedef	union PACKED _TX_RTY_CFG_STRUC	{
-	struct	{
-	    UINT32       ShortRtyLimit:8;	//  short retry limit
-	    UINT32       LongRtyLimit:8;	//long retry limit
-	    UINT32       LongRtyThre:12;	// Long retry threshoold
-	    UINT32       NonAggRtyMode:1;	// Non-Aggregate MPDU retry mode.  0:expired by retry limit, 1: expired by mpdu life timer
-	    UINT32       AggRtyMode:1;	// Aggregate MPDU retry mode.  0:expired by retry limit, 1: expired by mpdu life timer
-	    UINT32       TxautoFBEnable:1;    // Tx retry PHY rate auto fallback enable
-	    UINT32       rsv:1;     // 1: HT non-STBC control frame enable
-	}	field;
-	UINT32			word;
-}	TX_RTY_CFG_STRUC, *PTX_RTY_CFG_STRUC;
-#endif
-#define TX_LINK_CFG	0x1350
-#ifdef RT_BIG_ENDIAN
-typedef	union	PACKED _TX_LINK_CFG_STRUC	{
-	struct PACKED {
-	    UINT32       RemotMFS:8;	//remote MCS feedback sequence number
-	    UINT32       RemotMFB:8;    //  remote MCS feedback
-	    UINT32       rsv:3;	//
-	    UINT32       TxCFAckEn:1;	//   Piggyback CF-ACK enable
-	    UINT32       TxRDGEn:1;	// RDG TX enable
-	    UINT32       TxMRQEn:1;	//  MCS request TX enable
-	    UINT32       RemoteUMFSEnable:1;	//  remote unsolicit  MFB enable.  0: not apply remote remote unsolicit (MFS=7)
-	    UINT32       MFBEnable:1;	//  TX apply remote MFB 1:enable
-	    UINT32       RemoteMFBLifeTime:8;	//remote MFB life time. unit : 32us
-	}	field;
-	UINT32			word;
-}	TX_LINK_CFG_STRUC, *PTX_LINK_CFG_STRUC;
-#else
-typedef	union	PACKED _TX_LINK_CFG_STRUC	{
-	struct PACKED {
-	    UINT32       RemoteMFBLifeTime:8;	//remote MFB life time. unit : 32us
-	    UINT32       MFBEnable:1;	//  TX apply remote MFB 1:enable
-	    UINT32       RemoteUMFSEnable:1;	//  remote unsolicit  MFB enable.  0: not apply remote remote unsolicit (MFS=7)
-	    UINT32       TxMRQEn:1;	//  MCS request TX enable
-	    UINT32       TxRDGEn:1;	// RDG TX enable
-	    UINT32       TxCFAckEn:1;	//   Piggyback CF-ACK enable
-	    UINT32       rsv:3;	//
-	    UINT32       RemotMFB:8;    //  remote MCS feedback
-	    UINT32       RemotMFS:8;	//remote MCS feedback sequence number
-	}	field;
-	UINT32			word;
-}	TX_LINK_CFG_STRUC, *PTX_LINK_CFG_STRUC;
-#endif
-#define HT_FBK_CFG0	0x1354
-#ifdef RT_BIG_ENDIAN
-typedef	union PACKED _HT_FBK_CFG0_STRUC	{
-	struct	{
-	    UINT32       HTMCS7FBK:4;
-	    UINT32       HTMCS6FBK:4;
-	    UINT32       HTMCS5FBK:4;
-	    UINT32       HTMCS4FBK:4;
-	    UINT32       HTMCS3FBK:4;
-	    UINT32       HTMCS2FBK:4;
-	    UINT32       HTMCS1FBK:4;
-	    UINT32       HTMCS0FBK:4;
-	}	field;
-	UINT32			word;
-}	HT_FBK_CFG0_STRUC, *PHT_FBK_CFG0_STRUC;
-#else
-typedef	union PACKED _HT_FBK_CFG0_STRUC	{
-	struct	{
-	    UINT32       HTMCS0FBK:4;
-	    UINT32       HTMCS1FBK:4;
-	    UINT32       HTMCS2FBK:4;
-	    UINT32       HTMCS3FBK:4;
-	    UINT32       HTMCS4FBK:4;
-	    UINT32       HTMCS5FBK:4;
-	    UINT32       HTMCS6FBK:4;
-	    UINT32       HTMCS7FBK:4;
-	}	field;
-	UINT32			word;
-}	HT_FBK_CFG0_STRUC, *PHT_FBK_CFG0_STRUC;
-#endif
-#define HT_FBK_CFG1	0x1358
-#ifdef RT_BIG_ENDIAN
-typedef	union	_HT_FBK_CFG1_STRUC	{
-	struct	{
-	    UINT32       HTMCS15FBK:4;
-	    UINT32       HTMCS14FBK:4;
-	    UINT32       HTMCS13FBK:4;
-	    UINT32       HTMCS12FBK:4;
-	    UINT32       HTMCS11FBK:4;
-	    UINT32       HTMCS10FBK:4;
-	    UINT32       HTMCS9FBK:4;
-	    UINT32       HTMCS8FBK:4;
-	}	field;
-	UINT32			word;
-}	HT_FBK_CFG1_STRUC, *PHT_FBK_CFG1_STRUC;
-#else
-typedef	union	_HT_FBK_CFG1_STRUC	{
-	struct	{
-	    UINT32       HTMCS8FBK:4;
-	    UINT32       HTMCS9FBK:4;
-	    UINT32       HTMCS10FBK:4;
-	    UINT32       HTMCS11FBK:4;
-	    UINT32       HTMCS12FBK:4;
-	    UINT32       HTMCS13FBK:4;
-	    UINT32       HTMCS14FBK:4;
-	    UINT32       HTMCS15FBK:4;
-	}	field;
-	UINT32			word;
-}	HT_FBK_CFG1_STRUC, *PHT_FBK_CFG1_STRUC;
-#endif
-#define LG_FBK_CFG0	0x135c
-#ifdef RT_BIG_ENDIAN
-typedef	union	_LG_FBK_CFG0_STRUC	{
-	struct	{
-	    UINT32       OFDMMCS7FBK:4;	//initial value is 6
-	    UINT32       OFDMMCS6FBK:4;	//initial value is 5
-	    UINT32       OFDMMCS5FBK:4;	//initial value is 4
-	    UINT32       OFDMMCS4FBK:4;	//initial value is 3
-	    UINT32       OFDMMCS3FBK:4;	//initial value is 2
-	    UINT32       OFDMMCS2FBK:4;	//initial value is 1
-	    UINT32       OFDMMCS1FBK:4;	//initial value is 0
-	    UINT32       OFDMMCS0FBK:4;	//initial value is 0
-	}	field;
-	UINT32			word;
-}	LG_FBK_CFG0_STRUC, *PLG_FBK_CFG0_STRUC;
-#else
-typedef	union	_LG_FBK_CFG0_STRUC	{
-	struct	{
-	    UINT32       OFDMMCS0FBK:4;	//initial value is 0
-	    UINT32       OFDMMCS1FBK:4;	//initial value is 0
-	    UINT32       OFDMMCS2FBK:4;	//initial value is 1
-	    UINT32       OFDMMCS3FBK:4;	//initial value is 2
-	    UINT32       OFDMMCS4FBK:4;	//initial value is 3
-	    UINT32       OFDMMCS5FBK:4;	//initial value is 4
-	    UINT32       OFDMMCS6FBK:4;	//initial value is 5
-	    UINT32       OFDMMCS7FBK:4;	//initial value is 6
-	}	field;
-	UINT32			word;
-}	LG_FBK_CFG0_STRUC, *PLG_FBK_CFG0_STRUC;
-#endif
-#define LG_FBK_CFG1		0x1360
-#ifdef RT_BIG_ENDIAN
-typedef	union	_LG_FBK_CFG1_STRUC	{
-	struct	{
-	    UINT32       rsv:16;
-	    UINT32       CCKMCS3FBK:4;	//initial value is 2
-	    UINT32       CCKMCS2FBK:4;	//initial value is 1
-	    UINT32       CCKMCS1FBK:4;	//initial value is 0
-	    UINT32       CCKMCS0FBK:4;	//initial value is 0
-	}	field;
-	UINT32			word;
-}	LG_FBK_CFG1_STRUC, *PLG_FBK_CFG1_STRUC;
-#else
-typedef	union	_LG_FBK_CFG1_STRUC	{
-	struct	{
-	    UINT32       CCKMCS0FBK:4;	//initial value is 0
-	    UINT32       CCKMCS1FBK:4;	//initial value is 0
-	    UINT32       CCKMCS2FBK:4;	//initial value is 1
-	    UINT32       CCKMCS3FBK:4;	//initial value is 2
-	    UINT32       rsv:16;
-	}	field;
-	UINT32			word;
-}	LG_FBK_CFG1_STRUC, *PLG_FBK_CFG1_STRUC;
-#endif
-
-//=======================================================
-//================ Protection Paramater================================
-//=======================================================
-#define CCK_PROT_CFG	0x1364		//CCK Protection
-#define ASIC_SHORTNAV		1
-#define ASIC_LONGNAV		2
-#define ASIC_RTS		1
-#define ASIC_CTS		2
-#ifdef RT_BIG_ENDIAN
-typedef	union	_PROT_CFG_STRUC	{
-	struct	{
-	    UINT32       rsv:5;
-	    UINT32       RTSThEn:1;	//RTS threshold enable on CCK TX
-	    UINT32       TxopAllowGF40:1;	//CCK TXOP allowance.0:disallow.
-	    UINT32       TxopAllowGF20:1;	//CCK TXOP allowance.0:disallow.
-	    UINT32       TxopAllowMM40:1;	//CCK TXOP allowance.0:disallow.
-	    UINT32       TxopAllowMM20:1;	//CCK TXOP allowance. 0:disallow.
-	    UINT32       TxopAllowOfdm:1;	//CCK TXOP allowance.0:disallow.
-	    UINT32       TxopAllowCck:1;	//CCK TXOP allowance.0:disallow.
-	    UINT32       ProtectNav:2;	//TXOP protection type for CCK TX. 0:None, 1:ShortNAVprotect,  2:LongNAVProtect, 3:rsv
-	    UINT32       ProtectCtrl:2;	//Protection control frame type for CCK TX. 1:RTS/CTS, 2:CTS-to-self, 0:None, 3:rsv
-	    UINT32       ProtectRate:16;	//Protection control frame rate for CCK TX(RTS/CTS/CFEnd).
-	}	field;
-	UINT32			word;
-}	PROT_CFG_STRUC, *PPROT_CFG_STRUC;
-#else
-typedef	union	_PROT_CFG_STRUC	{
-	struct	{
-	    UINT32       ProtectRate:16;	//Protection control frame rate for CCK TX(RTS/CTS/CFEnd).
-	    UINT32       ProtectCtrl:2;	//Protection control frame type for CCK TX. 1:RTS/CTS, 2:CTS-to-self, 0:None, 3:rsv
-	    UINT32       ProtectNav:2;	//TXOP protection type for CCK TX. 0:None, 1:ShortNAVprotect,  2:LongNAVProtect, 3:rsv
-	    UINT32       TxopAllowCck:1;	//CCK TXOP allowance.0:disallow.
-	    UINT32       TxopAllowOfdm:1;	//CCK TXOP allowance.0:disallow.
-	    UINT32       TxopAllowMM20:1;	//CCK TXOP allowance. 0:disallow.
-	    UINT32       TxopAllowMM40:1;	//CCK TXOP allowance.0:disallow.
-	    UINT32       TxopAllowGF20:1;	//CCK TXOP allowance.0:disallow.
-	    UINT32       TxopAllowGF40:1;	//CCK TXOP allowance.0:disallow.
-	    UINT32       RTSThEn:1;	//RTS threshold enable on CCK TX
-	    UINT32       rsv:5;
-	}	field;
-	UINT32			word;
-}	PROT_CFG_STRUC, *PPROT_CFG_STRUC;
-#endif
-
-#define OFDM_PROT_CFG	0x1368		//OFDM Protection
-#define MM20_PROT_CFG	0x136C		//MM20 Protection
-#define MM40_PROT_CFG	0x1370		//MM40 Protection
-#define GF20_PROT_CFG	0x1374		//GF20 Protection
-#define GF40_PROT_CFG	0x1378		//GR40 Protection
-#define EXP_CTS_TIME	0x137C		//
-#define EXP_ACK_TIME	0x1380		//
-
-//
-//  4.4 MAC RX configuration registers (offset:0x1400)
-//
-#define RX_FILTR_CFG	0x1400			//TXRX_CSR0
-#define AUTO_RSP_CFG	0x1404			//TXRX_CSR4
-//
-// TXRX_CSR4: Auto-Responder/
-//
-#ifdef RT_BIG_ENDIAN
-typedef union _AUTO_RSP_CFG_STRUC {
- struct {
-     UINT32        :24;
-     UINT32       AckCtsPsmBit:1;   // Power bit value in conrtrol frame
-     UINT32       DualCTSEn:1;   // Power bit value in conrtrol frame
-     UINT32       rsv:1;   // Power bit value in conrtrol frame
-     UINT32       AutoResponderPreamble:1;    // 0:long, 1:short preamble
-     UINT32       CTS40MRef:1;  // Response CTS 40MHz duplicate mode
-     UINT32       CTS40MMode:1;  // Response CTS 40MHz duplicate mode
-     UINT32       BACAckPolicyEnable:1;    // 0:long, 1:short preamble
-     UINT32       AutoResponderEnable:1;
- } field;
- UINT32   word;
-} AUTO_RSP_CFG_STRUC, *PAUTO_RSP_CFG_STRUC;
-#else
-typedef union _AUTO_RSP_CFG_STRUC {
- struct {
-     UINT32       AutoResponderEnable:1;
-     UINT32       BACAckPolicyEnable:1;    // 0:long, 1:short preamble
-     UINT32       CTS40MMode:1;  // Response CTS 40MHz duplicate mode
-     UINT32       CTS40MRef:1;  // Response CTS 40MHz duplicate mode
-     UINT32       AutoResponderPreamble:1;    // 0:long, 1:short preamble
-     UINT32       rsv:1;   // Power bit value in conrtrol frame
-     UINT32       DualCTSEn:1;   // Power bit value in conrtrol frame
-     UINT32       AckCtsPsmBit:1;   // Power bit value in conrtrol frame
-     UINT32        :24;
- } field;
- UINT32   word;
-} AUTO_RSP_CFG_STRUC, *PAUTO_RSP_CFG_STRUC;
-#endif
-
-#define LEGACY_BASIC_RATE	0x1408	//  TXRX_CSR5           0x3054
-#define HT_BASIC_RATE		0x140c
-#define HT_CTRL_CFG		0x1410
-#define SIFS_COST_CFG		0x1414
-#define RX_PARSER_CFG		0x1418	//Set NAV for all received frames
-
-//
-//  4.5 MAC Security configuration (offset:0x1500)
-//
-#define TX_SEC_CNT0		0x1500		//
-#define RX_SEC_CNT0		0x1504		//
-#define CCMP_FC_MUTE		0x1508		//
-//
-//  4.6 HCCA/PSMP (offset:0x1600)
-//
-#define TXOP_HLDR_ADDR0		0x1600
-#define TXOP_HLDR_ADDR1		0x1604
-#define TXOP_HLDR_ET		0x1608
-#define QOS_CFPOLL_RA_DW0		0x160c
-#define QOS_CFPOLL_A1_DW1		0x1610
-#define QOS_CFPOLL_QC		0x1614
-//
-//  4.7 MAC Statistis registers (offset:0x1700)
-//
-#define RX_STA_CNT0		0x1700		//
-#define RX_STA_CNT1		0x1704		//
-#define RX_STA_CNT2		0x1708		//
-
-//
-// RX_STA_CNT0_STRUC: RX PLCP error count & RX CRC error count
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_RX_STA_CNT0_STRUC	{
-	struct	{
-	    USHORT  PhyErr;
-	    USHORT  CrcErr;
-	}	field;
-	UINT32			word;
-}	RX_STA_CNT0_STRUC, *PRX_STA_CNT0_STRUC;
-#else
-typedef	union	_RX_STA_CNT0_STRUC	{
-	struct	{
-	    USHORT  CrcErr;
-	    USHORT  PhyErr;
-	}	field;
-	UINT32			word;
-}	RX_STA_CNT0_STRUC, *PRX_STA_CNT0_STRUC;
-#endif
-
-//
-// RX_STA_CNT1_STRUC: RX False CCA count & RX LONG frame count
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_RX_STA_CNT1_STRUC	{
-	struct	{
-	    USHORT  PlcpErr;
-	    USHORT  FalseCca;
-	}	field;
-	UINT32			word;
-}	RX_STA_CNT1_STRUC, *PRX_STA_CNT1_STRUC;
-#else
-typedef	union	_RX_STA_CNT1_STRUC	{
-	struct	{
-	    USHORT  FalseCca;
-	    USHORT  PlcpErr;
-	}	field;
-	UINT32			word;
-}	RX_STA_CNT1_STRUC, *PRX_STA_CNT1_STRUC;
-#endif
-
-//
-// RX_STA_CNT2_STRUC:
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_RX_STA_CNT2_STRUC	{
-	struct	{
-	    USHORT  RxFifoOverflowCount;
-	    USHORT  RxDupliCount;
-	}	field;
-	UINT32			word;
-}	RX_STA_CNT2_STRUC, *PRX_STA_CNT2_STRUC;
-#else
-typedef	union	_RX_STA_CNT2_STRUC	{
-	struct	{
-	    USHORT  RxDupliCount;
-	    USHORT  RxFifoOverflowCount;
-	}	field;
-	UINT32			word;
-}	RX_STA_CNT2_STRUC, *PRX_STA_CNT2_STRUC;
-#endif
-#define TX_STA_CNT0		0x170C		//
-//
-// STA_CSR3: TX Beacon count
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_STA_CNT0_STRUC	{
-	struct	{
-	    USHORT  TxBeaconCount;
-	    USHORT  TxFailCount;
-	}	field;
-	UINT32			word;
-}	TX_STA_CNT0_STRUC, *PTX_STA_CNT0_STRUC;
-#else
-typedef	union	_TX_STA_CNT0_STRUC	{
-	struct	{
-	    USHORT  TxFailCount;
-	    USHORT  TxBeaconCount;
-	}	field;
-	UINT32			word;
-}	TX_STA_CNT0_STRUC, *PTX_STA_CNT0_STRUC;
-#endif
-#define TX_STA_CNT1		0x1710		//
-//
-// TX_STA_CNT1: TX tx count
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_STA_CNT1_STRUC	{
-	struct	{
-	    USHORT  TxRetransmit;
-	    USHORT  TxSuccess;
-	}	field;
-	UINT32			word;
-}	TX_STA_CNT1_STRUC, *PTX_STA_CNT1_STRUC;
-#else
-typedef	union	_TX_STA_CNT1_STRUC	{
-	struct	{
-	    USHORT  TxSuccess;
-	    USHORT  TxRetransmit;
-	}	field;
-	UINT32			word;
-}	TX_STA_CNT1_STRUC, *PTX_STA_CNT1_STRUC;
-#endif
-#define TX_STA_CNT2		0x1714		//
-//
-// TX_STA_CNT2: TX tx count
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_STA_CNT2_STRUC	{
-	struct	{
-	    USHORT  TxUnderFlowCount;
-	    USHORT  TxZeroLenCount;
-	}	field;
-	UINT32			word;
-}	TX_STA_CNT2_STRUC, *PTX_STA_CNT2_STRUC;
-#else
-typedef	union	_TX_STA_CNT2_STRUC	{
-	struct	{
-	    USHORT  TxZeroLenCount;
-	    USHORT  TxUnderFlowCount;
-	}	field;
-	UINT32			word;
-}	TX_STA_CNT2_STRUC, *PTX_STA_CNT2_STRUC;
-#endif
-#define TX_STA_FIFO		0x1718		//
-//
-// TX_STA_FIFO_STRUC: TX Result for specific PID status fifo register
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union PACKED _TX_STA_FIFO_STRUC	{
-	struct	{
-		UINT32		Reserve:2;
-		UINT32		TxBF:1; // 3*3
-		UINT32		SuccessRate:13;	//include MCS, mode ,shortGI, BW settingSame format as TXWI Word 0 Bit 31-16.
-//		UINT32		SuccessRate:16;	//include MCS, mode ,shortGI, BW settingSame format as TXWI Word 0 Bit 31-16.
-		UINT32		wcid:8;		//wireless client index
-		UINT32       	TxAckRequired:1;    // ack required
-		UINT32       	TxAggre:1;    // Tx is aggregated
-		UINT32       	TxSuccess:1;   // Tx success. whether success or not
-		UINT32       	PidType:4;
-		UINT32       	bValid:1;   // 1:This register contains a valid TX result
-	}	field;
-	UINT32			word;
-}	TX_STA_FIFO_STRUC, *PTX_STA_FIFO_STRUC;
-#else
-typedef	union PACKED _TX_STA_FIFO_STRUC	{
-	struct	{
-		UINT32       	bValid:1;   // 1:This register contains a valid TX result
-		UINT32       	PidType:4;
-		UINT32       	TxSuccess:1;   // Tx No retry success
-		UINT32       	TxAggre:1;    // Tx Retry Success
-		UINT32       	TxAckRequired:1;    // Tx fail
-		UINT32		wcid:8;		//wireless client index
-//		UINT32		SuccessRate:16;	//include MCS, mode ,shortGI, BW settingSame format as TXWI Word 0 Bit 31-16.
-		UINT32		SuccessRate:13;	//include MCS, mode ,shortGI, BW settingSame format as TXWI Word 0 Bit 31-16.
-		UINT32		TxBF:1;
-		UINT32		Reserve:2;
-	}	field;
-	UINT32			word;
-}	TX_STA_FIFO_STRUC, *PTX_STA_FIFO_STRUC;
-#endif
-// Debug counter
-#define TX_AGG_CNT	0x171c
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_AGG_CNT_STRUC	{
-	struct	{
-	    USHORT  AggTxCount;
-	    USHORT  NonAggTxCount;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT_STRUC, *PTX_AGG_CNT_STRUC;
-#else
-typedef	union	_TX_AGG_CNT_STRUC	{
-	struct	{
-	    USHORT  NonAggTxCount;
-	    USHORT  AggTxCount;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT_STRUC, *PTX_AGG_CNT_STRUC;
-#endif
-// Debug counter
-#define TX_AGG_CNT0	0x1720
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_AGG_CNT0_STRUC	{
-	struct	{
-	    USHORT  AggSize2Count;
-	    USHORT  AggSize1Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT0_STRUC, *PTX_AGG_CNT0_STRUC;
-#else
-typedef	union	_TX_AGG_CNT0_STRUC	{
-	struct	{
-	    USHORT  AggSize1Count;
-	    USHORT  AggSize2Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT0_STRUC, *PTX_AGG_CNT0_STRUC;
-#endif
-// Debug counter
-#define TX_AGG_CNT1	0x1724
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_AGG_CNT1_STRUC	{
-	struct	{
-	    USHORT  AggSize4Count;
-	    USHORT  AggSize3Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT1_STRUC, *PTX_AGG_CNT1_STRUC;
-#else
-typedef	union	_TX_AGG_CNT1_STRUC	{
-	struct	{
-	    USHORT  AggSize3Count;
-	    USHORT  AggSize4Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT1_STRUC, *PTX_AGG_CNT1_STRUC;
-#endif
-#define TX_AGG_CNT2	0x1728
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_AGG_CNT2_STRUC	{
-	struct	{
-	    USHORT  AggSize6Count;
-	    USHORT  AggSize5Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT2_STRUC, *PTX_AGG_CNT2_STRUC;
-#else
-typedef	union	_TX_AGG_CNT2_STRUC	{
-	struct	{
-	    USHORT  AggSize5Count;
-	    USHORT  AggSize6Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT2_STRUC, *PTX_AGG_CNT2_STRUC;
-#endif
-// Debug counter
-#define TX_AGG_CNT3	0x172c
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_AGG_CNT3_STRUC	{
-	struct	{
-	    USHORT  AggSize8Count;
-	    USHORT  AggSize7Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT3_STRUC, *PTX_AGG_CNT3_STRUC;
-#else
-typedef	union	_TX_AGG_CNT3_STRUC	{
-	struct	{
-	    USHORT  AggSize7Count;
-	    USHORT  AggSize8Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT3_STRUC, *PTX_AGG_CNT3_STRUC;
-#endif
-// Debug counter
-#define TX_AGG_CNT4	0x1730
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_AGG_CNT4_STRUC	{
-	struct	{
-	    USHORT  AggSize10Count;
-	    USHORT  AggSize9Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT4_STRUC, *PTX_AGG_CNT4_STRUC;
-#else
-typedef	union	_TX_AGG_CNT4_STRUC	{
-	struct	{
-	    USHORT  AggSize9Count;
-	    USHORT  AggSize10Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT4_STRUC, *PTX_AGG_CNT4_STRUC;
-#endif
-#define TX_AGG_CNT5	0x1734
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_AGG_CNT5_STRUC	{
-	struct	{
-	    USHORT  AggSize12Count;
-	    USHORT  AggSize11Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT5_STRUC, *PTX_AGG_CNT5_STRUC;
-#else
-typedef	union	_TX_AGG_CNT5_STRUC	{
-	struct	{
-	    USHORT  AggSize11Count;
-	    USHORT  AggSize12Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT5_STRUC, *PTX_AGG_CNT5_STRUC;
-#endif
-#define TX_AGG_CNT6		0x1738
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_AGG_CNT6_STRUC	{
-	struct	{
-	    USHORT  AggSize14Count;
-	    USHORT  AggSize13Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT6_STRUC, *PTX_AGG_CNT6_STRUC;
-#else
-typedef	union	_TX_AGG_CNT6_STRUC	{
-	struct	{
-	    USHORT  AggSize13Count;
-	    USHORT  AggSize14Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT6_STRUC, *PTX_AGG_CNT6_STRUC;
-#endif
-#define TX_AGG_CNT7		0x173c
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_AGG_CNT7_STRUC	{
-	struct	{
-	    USHORT  AggSize16Count;
-	    USHORT  AggSize15Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT7_STRUC, *PTX_AGG_CNT7_STRUC;
-#else
-typedef	union	_TX_AGG_CNT7_STRUC	{
-	struct	{
-	    USHORT  AggSize15Count;
-	    USHORT  AggSize16Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT7_STRUC, *PTX_AGG_CNT7_STRUC;
-#endif
-#define MPDU_DENSITY_CNT		0x1740
-#ifdef RT_BIG_ENDIAN
-typedef	union	_MPDU_DEN_CNT_STRUC	{
-	struct	{
-	    USHORT  RXZeroDelCount;	//RX zero length delimiter count
-	    USHORT  TXZeroDelCount;	//TX zero length delimiter count
-	}	field;
-	UINT32			word;
-}	MPDU_DEN_CNT_STRUC, *PMPDU_DEN_CNT_STRUC;
-#else
-typedef	union	_MPDU_DEN_CNT_STRUC	{
-	struct	{
-	    USHORT  TXZeroDelCount;	//TX zero length delimiter count
-	    USHORT  RXZeroDelCount;	//RX zero length delimiter count
-	}	field;
-	UINT32			word;
-}	MPDU_DEN_CNT_STRUC, *PMPDU_DEN_CNT_STRUC;
-#endif
-//
-// TXRX control registers - base address 0x3000
-//
-// rt2860b  UNKNOWN reg use R/O Reg Addr 0x77d0 first..
-#define TXRX_CSR1           0x77d0
-
-//
-// Security key table memory, base address = 0x1000
-//
-#define MAC_WCID_BASE		0x1800 //8-bytes(use only 6-bytes) * 256 entry =
-#define HW_WCID_ENTRY_SIZE   8
-#define PAIRWISE_KEY_TABLE_BASE     0x4000      // 32-byte * 256-entry =  -byte
-#define HW_KEY_ENTRY_SIZE           0x20
-#define PAIRWISE_IVEIV_TABLE_BASE     0x6000      // 8-byte * 256-entry =  -byte
-#define MAC_IVEIV_TABLE_BASE     0x6000      // 8-byte * 256-entry =  -byte
-#define HW_IVEIV_ENTRY_SIZE   8
-#define MAC_WCID_ATTRIBUTE_BASE     0x6800      // 4-byte * 256-entry =  -byte
-#define HW_WCID_ATTRI_SIZE   4
-#define WCID_RESERVED          		0x6bfc
-#define SHARED_KEY_TABLE_BASE       0x6c00      // 32-byte * 16-entry = 512-byte
-#define SHARED_KEY_MODE_BASE       0x7000      // 32-byte * 16-entry = 512-byte
-#define HW_SHARED_KEY_MODE_SIZE   4
-#define SHAREDKEYTABLE			0
-#define PAIRWISEKEYTABLE			1
-
-
-#ifdef RT_BIG_ENDIAN
-typedef	union	_SHAREDKEY_MODE_STRUC	{
-	struct	{
-		UINT32       :1;
-		UINT32       Bss1Key3CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss1Key2CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss1Key1CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss1Key0CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss0Key3CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss0Key2CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss0Key1CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss0Key0CipherAlg:3;
-	}	field;
-	UINT32			word;
-}	SHAREDKEY_MODE_STRUC, *PSHAREDKEY_MODE_STRUC;
-#else
-typedef	union	_SHAREDKEY_MODE_STRUC	{
-	struct	{
-		UINT32       Bss0Key0CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss0Key1CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss0Key2CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss0Key3CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss1Key0CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss1Key1CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss1Key2CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss1Key3CipherAlg:3;
-		UINT32       :1;
-	}	field;
-	UINT32			word;
-}	SHAREDKEY_MODE_STRUC, *PSHAREDKEY_MODE_STRUC;
-#endif
-// 64-entry for pairwise key table
-typedef struct _HW_WCID_ENTRY {  // 8-byte per entry
-    UCHAR   Address[6];
-    UCHAR   Rsv[2];
-} HW_WCID_ENTRY, PHW_WCID_ENTRY;
-
-
-
-//
-// Other on-chip shared memory space, base = 0x2000
-//
-
-// CIS space - base address = 0x2000
-#define HW_CIS_BASE             0x2000
-
-// Carrier-sense CTS frame base address. It's where mac stores carrier-sense frame for carrier-sense function.
-#define HW_CS_CTS_BASE			0x7700
-// DFS CTS frame base address. It's where mac stores CTS frame for DFS.
-#define HW_DFS_CTS_BASE			0x7780
-#define HW_CTS_FRAME_SIZE		0x80
-
-// 2004-11-08 john - since NULL frame won't be that long (256 byte). We steal 16 tail bytes
-// to save debugging settings
-#define HW_DEBUG_SETTING_BASE   0x77f0  // 0x77f0~0x77ff total 16 bytes
-#define HW_DEBUG_SETTING_BASE2   0x7770  // 0x77f0~0x77ff total 16 bytes
-
-#if 0
-// on-chip BEACON frame space - base address = 0x7800
-#define HW_BEACON_MAX_SIZE      0x0800 /* unit: byte */
-#define HW_BEACON_BASE0         0x7800
-#define HW_BEACON_BASE1         0x7900
-#define HW_BEACON_BASE2         0x7a00
-#define HW_BEACON_BASE3         0x7b00
-#define HW_BEACON_BASE4         0x7c00
-#define HW_BEACON_BASE5         0x7d00
-#define HW_BEACON_BASE6         0x7e00
-#define HW_BEACON_BASE7         0x7f00
-/* 1. HW_BEACON_OFFSET/64B must be 0;
-   2. BCN_OFFSET0 must also be changed in NICInitializeAsic();
-   3. max 0x0800 for 8 beacon frames; */
-#else
-// In order to support maximum 8 MBSS and its maximum length is 512 for each beacon
-// Three section discontinue memory segments will be used.
-// 1. The original region for BCN 0~3
-// 2. Extract memory from FCE table for BCN 4~5
-// 3. Extract memory from Pair-wise key table for BCN 6~7
-//	  It occupied those memory of wcid 238~253 for BCN 6
-//						      and wcid 222~237 for BCN 7
-#define HW_BEACON_MAX_SIZE      0x1000 /* unit: byte */
-#define HW_BEACON_BASE0         0x7800
-#define HW_BEACON_BASE1         0x7A00
-#define HW_BEACON_BASE2         0x7C00
-#define HW_BEACON_BASE3         0x7E00
-#define HW_BEACON_BASE4         0x7200
-#define HW_BEACON_BASE5         0x7400
-#define HW_BEACON_BASE6         0x5DC0
-#define HW_BEACON_BASE7         0x5BC0
-#endif
-
-#define HW_BEACON_MAX_COUNT     8
-#define HW_BEACON_OFFSET		0x0200
-#define HW_BEACON_CONTENT_LEN	(HW_BEACON_OFFSET - TXWI_SIZE)
-
-// HOST-MCU shared memory - base address = 0x2100
-#define HOST_CMD_CSR		0x404
-#define H2M_MAILBOX_CSR         0x7010
-#define H2M_MAILBOX_CID         0x7014
-#define H2M_MAILBOX_STATUS      0x701c
-#define H2M_INT_SRC             0x7024
-#define H2M_BBP_AGENT           0x7028
-#define M2H_CMD_DONE_CSR        0x000c
-#define MCU_TXOP_ARRAY_BASE     0x000c   // TODO: to be provided by Albert
-#define MCU_TXOP_ENTRY_SIZE     32       // TODO: to be provided by Albert
-#define MAX_NUM_OF_TXOP_ENTRY   16       // TODO: must be same with 8051 firmware
-#define MCU_MBOX_VERSION        0x01     // TODO: to be confirmed by Albert
-#define MCU_MBOX_VERSION_OFFSET 5        // TODO: to be provided by Albert
-
-//
-// Host DMA registers - base address 0x200 .  TX0-3=EDCAQid0-3, TX4=HCCA, TX5=MGMT,
-//
-//
-//  DMA RING DESCRIPTOR
-//
-#define E2PROM_CSR          0x0004
-#define IO_CNTL_CSR         0x77d0
-
-#ifdef RT2870
-// 8051 firmware image for usb - use last-half base address = 0x3000
-#define FIRMWARE_IMAGE_BASE     0x3000
-#define MAX_FIRMWARE_IMAGE_SIZE 0x1000    // 4kbyte
-#endif // RT2870 //
-
-// TODO: ????? old RT2560 registers. to keep them or remove them?
-//#define MCAST0                  0x0178  // multicast filter register 0
-//#define MCAST1                  0x017c  // multicast filter register 1
-
-
-// ================================================================
-// Tx /	Rx / Mgmt ring descriptor definition
-// ================================================================
-
-// the following PID values are used to mark outgoing frame type in TXD->PID so that
-// proper TX statistics can be collected based on these categories
-// b3-2 of PID field -
-#define PID_MGMT			0x05
-#define PID_BEACON			0x0c
-#define PID_DATA_NORMALUCAST	 	0x02
-#define PID_DATA_AMPDU	 	0x04
-#define PID_DATA_NO_ACK    	0x08
-#define PID_DATA_NOT_NORM_ACK	 	0x03
-#if 0
-#define PTYPE_DATA_REQUIRE_ACK  0x00 // b7-6:00, b5-0: 0~59 is MAC table index (AID?), 60~63 is WDS index
-#define PTYPE_NULL_AT_HIGH_RATE 0x04 // b7-6:01, b5-0: 0~59 is MAC table index (AID?), 60~63 is WDS index
-#define PTYPE_RESERVED          0x08 // b7-6:10
-#define PTYPE_SPECIAL           0x0c // b7-6:11
-
-// when b3-2=11 (PTYPE_SPECIAL), b1-0 coube be ...
-#define PSUBTYPE_DATA_NO_ACK    0x00
-#define PSUBTYPE_MGMT           0x01
-#define PSUBTYPE_OTHER_CNTL     0x02
-#define PSUBTYPE_RTS            0x03
-#endif
-// value domain of pTxD->HostQId (4-bit: 0~15)
-#define QID_AC_BK               1   // meet ACI definition in 802.11e
-#define QID_AC_BE               0   // meet ACI definition in 802.11e
-#define QID_AC_VI               2
-#define QID_AC_VO               3
-#define QID_HCCA                4
-#define NUM_OF_TX_RING          5
-#define QID_MGMT                13
-#define QID_RX                  14
-#define QID_OTHER               15
-
-
-// ------------------------------------------------------
-// BBP & RF	definition
-// ------------------------------------------------------
-#define	BUSY		                1
-#define	IDLE		                0
-
-#define	RF_R00					    0
-#define	RF_R01					    1
-#define	RF_R02					    2
-#define	RF_R03					    3
-#define	RF_R04					    4
-#define	RF_R05					    5
-#define	RF_R06					    6
-#define	RF_R07					    7
-#define	RF_R08					    8
-#define	RF_R09					    9
-#define	RF_R10					    10
-#define	RF_R11					    11
-#define	RF_R12					    12
-#define	RF_R13					    13
-#define	RF_R14					    14
-#define	RF_R15					    15
-#define	RF_R16					    16
-#define	RF_R17					    17
-#define	RF_R18					    18
-#define	RF_R19					    19
-#define	RF_R20					    20
-#define	RF_R21					    21
-#define	RF_R22					    22
-#define	RF_R23					    23
-#define	RF_R24					    24
-#define	RF_R25					    25
-#define	RF_R26					    26
-#define	RF_R27					    27
-#define	RF_R28					    28
-#define	RF_R29					    29
-#define	RF_R30					    30
-#define	RF_R31					    31
-
-#define	BBP_R0					    0  // version
-#define	BBP_R1				        1  // TSSI
-#define	BBP_R2          			2  // TX configure
-#define BBP_R3                      3
-#define BBP_R4                      4
-#define BBP_R5                      5
-#define BBP_R6                      6
-#define	BBP_R14			            14 // RX configure
-#define BBP_R16                     16
-#define BBP_R17                     17 // RX sensibility
-#define BBP_R18                     18
-#define BBP_R21                     21
-#define BBP_R22                     22
-#define BBP_R24                     24
-#define BBP_R25                     25
-#define BBP_R49                     49 //TSSI
-#define BBP_R50                     50
-#define BBP_R51                     51
-#define BBP_R52                     52
-#define BBP_R55                     55
-#define BBP_R62                     62 // Rx SQ0 Threshold HIGH
-#define BBP_R63                     63
-#define BBP_R64                     64
-#define BBP_R65                     65
-#define BBP_R66                     66
-#define BBP_R67                     67
-#define BBP_R68                     68
-#define BBP_R69                     69
-#define BBP_R70                     70 // Rx AGC SQ CCK Xcorr threshold
-#define BBP_R73                     73
-#define BBP_R75						75
-#define BBP_R77                     77
-#define BBP_R81                     81
-#define BBP_R82                     82
-#define BBP_R83                     83
-#define BBP_R84                     84
-#define BBP_R86						86
-#define BBP_R91						91
-#define BBP_R92						92
-#define BBP_R94                     94 // Tx Gain Control
-#define BBP_R103                    103
-#define BBP_R105                    105
-#define BBP_R113                    113
-#define BBP_R114                    114
-#define BBP_R115                    115
-#define BBP_R116                    116
-#define BBP_R117                    117
-#define BBP_R118                    118
-#define BBP_R119                    119
-#define BBP_R120                    120
-#define BBP_R121                    121
-#define BBP_R122                    122
-#define BBP_R123                    123
-
-
-#define BBPR94_DEFAULT              0x06 // Add 1 value will gain 1db
-
-//#define PHY_TR_SWITCH_TIME          5  // usec
-
-//#define BBP_R17_LOW_SENSIBILITY     0x50
-//#define BBP_R17_MID_SENSIBILITY     0x41
-//#define BBP_R17_DYNAMIC_UP_BOUND    0x40
-#define RSSI_FOR_VERY_LOW_SENSIBILITY -35
-#define RSSI_FOR_LOW_SENSIBILITY      -58
-#define RSSI_FOR_MID_LOW_SENSIBILITY  -80
-#define RSSI_FOR_MID_SENSIBILITY      -90
-
-//-------------------------------------------------------------------------
-// EEPROM definition
-//-------------------------------------------------------------------------
-#define EEDO                        0x08
-#define EEDI                        0x04
-#define EECS                        0x02
-#define EESK                        0x01
-#define EERL                        0x80
-
-#define EEPROM_WRITE_OPCODE         0x05
-#define EEPROM_READ_OPCODE          0x06
-#define EEPROM_EWDS_OPCODE          0x10
-#define EEPROM_EWEN_OPCODE          0x13
-
-#define	NUM_EEPROM_BBP_PARMS		19			// Include NIC Config 0, 1, CR, TX ALC step, BBPs
-#define	NUM_EEPROM_TX_G_PARMS		7
-#define	EEPROM_NIC1_OFFSET          0x34		// The address is from NIC config 0, not BBP register ID
-#define	EEPROM_NIC2_OFFSET          0x36		// The address is from NIC config 0, not BBP register ID
-#define	EEPROM_BBP_BASE_OFFSET		0xf0		// The address is from NIC config 0, not BBP register ID
-#define	EEPROM_G_TX_PWR_OFFSET		0x52
-#define	EEPROM_G_TX2_PWR_OFFSET		0x60
-#define EEPROM_LED1_OFFSET			0x3c
-#define EEPROM_LED2_OFFSET			0x3e
-#define EEPROM_LED3_OFFSET			0x40
-#define EEPROM_LNA_OFFSET			0x44
-#define EEPROM_RSSI_BG_OFFSET		0x46
-#define EEPROM_RSSI_A_OFFSET		0x4a
-#define EEPROM_DEFINE_MAX_TXPWR		0x4e
-#define EEPROM_TXPOWER_BYRATE_20MHZ_2_4G	0xde	// 20MHZ 2.4G tx power.
-#define EEPROM_TXPOWER_BYRATE_40MHZ_2_4G	0xee	// 40MHZ 2.4G tx power.
-#define EEPROM_TXPOWER_BYRATE_20MHZ_5G		0xfa	// 20MHZ 5G tx power.
-#define EEPROM_TXPOWER_BYRATE_40MHZ_5G		0x10a	// 40MHZ 5G tx power.
-#define EEPROM_A_TX_PWR_OFFSET      0x78
-#define EEPROM_A_TX2_PWR_OFFSET      0xa6
-//#define EEPROM_Japan_TX_PWR_OFFSET      0x90 // 802.11j
-//#define EEPROM_Japan_TX2_PWR_OFFSET      0xbe
-//#define EEPROM_TSSI_REF_OFFSET	0x54
-//#define EEPROM_TSSI_DELTA_OFFSET	0x24
-//#define EEPROM_CCK_TX_PWR_OFFSET  0x62
-//#define EEPROM_CALIBRATE_OFFSET	0x7c
-#define EEPROM_VERSION_OFFSET       0x02
-#define	EEPROM_FREQ_OFFSET			0x3a
-#define EEPROM_TXPOWER_BYRATE 	0xde	// 20MHZ power.
-#define EEPROM_TXPOWER_DELTA		0x50	// 20MHZ AND 40 MHZ use different power. This is delta in 40MHZ.
-#define VALID_EEPROM_VERSION        1
-
-// PairKeyMode definition
-#define PKMODE_NONE                 0
-#define PKMODE_WEP64                1
-#define PKMODE_WEP128               2
-#define PKMODE_TKIP                 3
-#define PKMODE_AES                  4
-#define PKMODE_CKIP64               5
-#define PKMODE_CKIP128              6
-#define PKMODE_TKIP_NO_MIC          7       // MIC appended by driver: not a valid value in hardware key table
-
-// =================================================================================
-// WCID  format
-// =================================================================================
-//7.1	WCID  ENTRY  format  : 8bytes
-typedef	struct	_WCID_ENTRY_STRUC {
-	UCHAR		RXBABitmap7;    // bit0 for TID8, bit7 for TID 15
-	UCHAR		RXBABitmap0;    // bit0 for TID0, bit7 for TID 7
-	UCHAR		MAC[6];	// 0 for shared key table.  1 for pairwise key table
-}	WCID_ENTRY_STRUC, *PWCID_ENTRY_STRUC;
-
-//8.1.1	SECURITY  KEY  format  : 8DW
-// 32-byte per entry, total 16-entry for shared key table, 64-entry for pairwise key table
-typedef struct _HW_KEY_ENTRY {          // 32-byte per entry
-    UCHAR   Key[16];
-    UCHAR   TxMic[8];
-    UCHAR   RxMic[8];
-} HW_KEY_ENTRY, *PHW_KEY_ENTRY;
-
-//8.1.2	IV/EIV  format  : 2DW
-
-//8.1.3	RX attribute entry format  : 1DW
-#ifdef RT_BIG_ENDIAN
-typedef	struct	_MAC_ATTRIBUTE_STRUC {
-	UINT32		rsv:22;
-	UINT32		RXWIUDF:3;
-	UINT32		BSSIDIdx:3; //multipleBSS index for the WCID
-	UINT32		PairKeyMode:3;
-	UINT32		KeyTab:1;	// 0 for shared key table.  1 for pairwise key table
-}	MAC_ATTRIBUTE_STRUC, *PMAC_ATTRIBUTE_STRUC;
-#else
-typedef	struct	_MAC_ATTRIBUTE_STRUC {
-	UINT32		KeyTab:1;	// 0 for shared key table.  1 for pairwise key table
-	UINT32		PairKeyMode:3;
-	UINT32		BSSIDIdx:3; //multipleBSS index for the WCID
-	UINT32		RXWIUDF:3;
-	UINT32		rsv:22;
-}	MAC_ATTRIBUTE_STRUC, *PMAC_ATTRIBUTE_STRUC;
-#endif
-
-
-// =================================================================================
-// TX / RX ring descriptor format
-// =================================================================================
-
-// the first 24-byte in TXD is called TXINFO and will be DMAed to MAC block through TXFIFO.
-// MAC block use this TXINFO to control the transmission behavior of this frame.
-#define FIFO_MGMT                 0
-#define FIFO_HCCA                 1
-#define FIFO_EDCA                 2
-
-//
-// TX descriptor format, Tx	ring, Mgmt Ring
-//
-#ifdef RT_BIG_ENDIAN
-typedef	struct	PACKED _TXD_STRUC {
-	// Word 0
-	UINT32		SDPtr0;
-	// Word 1
-	UINT32		DMADONE:1;
-	UINT32		LastSec0:1;
-	UINT32		SDLen0:14;
-	UINT32		Burst:1;
-	UINT32		LastSec1:1;
-	UINT32		SDLen1:14;
-	// Word 2
-	UINT32		SDPtr1;
-	// Word 3
-	UINT32		ICO:1;
-	UINT32		UCO:1;
-	UINT32		TCO:1;
-	UINT32		rsv:2;
-	UINT32		QSEL:2;	// select on-chip FIFO ID for 2nd-stage output scheduler.0:MGMT, 1:HCCA 2:EDCA
-	UINT32		WIV:1;	// Wireless Info Valid. 1 if Driver already fill WI,  o if DMA needs to copy WI to correctposition
-	UINT32		rsv2:24;
-}	TXD_STRUC, *PTXD_STRUC;
-#else
-typedef	struct	PACKED _TXD_STRUC {
-	// Word	0
-	UINT32		SDPtr0;
-	// Word	1
-	UINT32		SDLen1:14;
-	UINT32		LastSec1:1;
-	UINT32		Burst:1;
-	UINT32		SDLen0:14;
-	UINT32		LastSec0:1;
-	UINT32		DMADONE:1;
-	//Word2
-	UINT32		SDPtr1;
-	//Word3
-	UINT32		rsv2:24;
-	UINT32		WIV:1;	// Wireless Info Valid. 1 if Driver already fill WI,  o if DMA needs to copy WI to correctposition
-	UINT32		QSEL:2;	// select on-chip FIFO ID for 2nd-stage output scheduler.0:MGMT, 1:HCCA 2:EDCA
-	UINT32		rsv:2;
-	UINT32		TCO:1;	//
-	UINT32		UCO:1;	//
-	UINT32		ICO:1;	//
-}	TXD_STRUC, *PTXD_STRUC;
-#endif
-
-
-//
-// TXD Wireless Information format for Tx ring and Mgmt Ring
-//
-//txop : for txop mode
-// 0:txop for the MPDU frame will be handles by ASIC by register
-// 1/2/3:the MPDU frame is send after PIFS/backoff/SIFS
-#ifdef RT_BIG_ENDIAN
-typedef	struct	PACKED _TXWI_STRUC {
-	// Word 0
-	UINT32		PHYMODE:2;
-	UINT32		TxBF:1;	// 3*3
-	UINT32		rsv2:1;
-//	UINT32		rsv2:2;
-	UINT32		Ifs:1;	//
-	UINT32		STBC:2;	//channel bandwidth 20MHz or 40 MHz
-	UINT32		ShortGI:1;
-	UINT32		BW:1;	//channel bandwidth 20MHz or 40 MHz
-	UINT32		MCS:7;
-
-	UINT32		rsv:6;
-	UINT32		txop:2;	//tx back off mode 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs only when previous frame exchange is successful.
-	UINT32		MpduDensity:3;
-	UINT32		AMPDU:1;
-
-	UINT32		TS:1;
-	UINT32		CFACK:1;
-	UINT32		MIMOps:1;	// the remote peer is in dynamic MIMO-PS mode
-	UINT32		FRAG:1;		// 1 to inform TKIP engine this is a fragment.
-	// Word 1
-	UINT32		PacketId:4;
-	UINT32		MPDUtotalByteCount:12;
-	UINT32		WirelessCliID:8;
-	UINT32		BAWinSize:6;
-	UINT32		NSEQ:1;
-	UINT32		ACK:1;
-	// Word 2
-	UINT32		IV;
-	// Word 3
-	UINT32		EIV;
-}	TXWI_STRUC, *PTXWI_STRUC;
-#else
-typedef	struct	PACKED _TXWI_STRUC {
-	// Word	0
-	UINT32		FRAG:1;		// 1 to inform TKIP engine this is a fragment.
-	UINT32		MIMOps:1;	// the remote peer is in dynamic MIMO-PS mode
-	UINT32		CFACK:1;
-	UINT32		TS:1;
-
-	UINT32		AMPDU:1;
-	UINT32		MpduDensity:3;
-	UINT32		txop:2;	//FOR "THIS" frame. 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs only when previous frame exchange is successful.
-	UINT32		rsv:6;
-
-	UINT32		MCS:7;
-	UINT32		BW:1;	//channel bandwidth 20MHz or 40 MHz
-	UINT32		ShortGI:1;
-	UINT32		STBC:2;	// 1: STBC support MCS =0-7,   2,3 : RESERVE
-	UINT32		Ifs:1;	//
-//	UINT32		rsv2:2;	//channel bandwidth 20MHz or 40 MHz
-	UINT32		rsv2:1;
-	UINT32		TxBF:1;	// 3*3
-	UINT32		PHYMODE:2;
-	// Word	1
-	UINT32		ACK:1;
-	UINT32		NSEQ:1;
-	UINT32		BAWinSize:6;
-	UINT32		WirelessCliID:8;
-	UINT32		MPDUtotalByteCount:12;
-	UINT32		PacketId:4;
-	//Word2
-	UINT32		IV;
-	//Word3
-	UINT32		EIV;
-}	TXWI_STRUC, *PTXWI_STRUC;
-#endif
-//
-// Rx descriptor format, Rx	Ring
-//
-//
-// RXWI wireless information format, in PBF. invisible in driver.
-//
-#ifdef RT_BIG_ENDIAN
-typedef	struct	PACKED _RXWI_STRUC {
-	// Word 0
-	UINT32		TID:4;
-	UINT32		MPDUtotalByteCount:12;
-	UINT32		UDF:3;
-	UINT32		BSSID:3;
-	UINT32		KeyIndex:2;
-	UINT32		WirelessCliID:8;
-	// Word 1
-	UINT32		PHYMODE:2;              // 1: this RX frame is unicast to me
-	UINT32		rsv:3;
-	UINT32		STBC:2;
-	UINT32		ShortGI:1;
-	UINT32		BW:1;
-	UINT32		MCS:7;
-	UINT32		SEQUENCE:12;
-	UINT32		FRAG:4;
-	// Word 2
-	UINT32		rsv1:8;
-	UINT32		RSSI2:8;
-	UINT32		RSSI1:8;
-	UINT32		RSSI0:8;
-	// Word 3
-	UINT32		rsv2:16;
-	UINT32		SNR1:8;
-	UINT32		SNR0:8;
-}	RXWI_STRUC, *PRXWI_STRUC;
-#else
-typedef	struct	PACKED _RXWI_STRUC {
-	// Word	0
-	UINT32		WirelessCliID:8;
-	UINT32		KeyIndex:2;
-	UINT32		BSSID:3;
-	UINT32		UDF:3;
-	UINT32		MPDUtotalByteCount:12;
-	UINT32		TID:4;
-	// Word	1
-	UINT32		FRAG:4;
-	UINT32		SEQUENCE:12;
-	UINT32		MCS:7;
-	UINT32		BW:1;
-	UINT32		ShortGI:1;
-	UINT32		STBC:2;
-	UINT32		rsv:3;
-	UINT32		PHYMODE:2;              // 1: this RX frame is unicast to me
-	//Word2
-	UINT32		RSSI0:8;
-	UINT32		RSSI1:8;
-	UINT32		RSSI2:8;
-	UINT32		rsv1:8;
-	//Word3
-	UINT32		SNR0:8;
-	UINT32		SNR1:8;
-	UINT32		rsv2:16;
-}	RXWI_STRUC, *PRXWI_STRUC;
-#endif
-
-
-// =================================================================================
-// HOST-MCU communication data structure
-// =================================================================================
-
-//
-// H2M_MAILBOX_CSR: Host-to-MCU Mailbox
-//
-#ifdef RT_BIG_ENDIAN
-typedef union  _H2M_MAILBOX_STRUC {
-    struct {
-        UINT32       Owner:8;
-        UINT32       CmdToken:8;    // 0xff tells MCU not to report CmdDoneInt after excuting the command
-        UINT32       HighByte:8;
-        UINT32       LowByte:8;
-    }   field;
-    UINT32           word;
-} H2M_MAILBOX_STRUC, *PH2M_MAILBOX_STRUC;
-#else
-typedef union  _H2M_MAILBOX_STRUC {
-    struct {
-        UINT32       LowByte:8;
-        UINT32       HighByte:8;
-        UINT32       CmdToken:8;
-        UINT32       Owner:8;
-    }   field;
-    UINT32           word;
-} H2M_MAILBOX_STRUC, *PH2M_MAILBOX_STRUC;
-#endif
-
-//
-// M2H_CMD_DONE_CSR: MCU-to-Host command complete indication
-//
-#ifdef RT_BIG_ENDIAN
-typedef union _M2H_CMD_DONE_STRUC {
-    struct  {
-        UINT32       CmdToken3;
-        UINT32       CmdToken2;
-        UINT32       CmdToken1;
-        UINT32       CmdToken0;
-    } field;
-    UINT32           word;
-} M2H_CMD_DONE_STRUC, *PM2H_CMD_DONE_STRUC;
-#else
-typedef union _M2H_CMD_DONE_STRUC {
-    struct  {
-        UINT32       CmdToken0;
-        UINT32       CmdToken1;
-        UINT32       CmdToken2;
-        UINT32       CmdToken3;
-    } field;
-    UINT32           word;
-} M2H_CMD_DONE_STRUC, *PM2H_CMD_DONE_STRUC;
-#endif
-
-
-
-//
-// MCU_LEDCS: MCU LED Control Setting.
-//
-#ifdef RT_BIG_ENDIAN
-typedef union  _MCU_LEDCS_STRUC {
-	struct	{
-		UCHAR		Polarity:1;
-		UCHAR		LedMode:7;
-	} field;
-	UCHAR				word;
-} MCU_LEDCS_STRUC, *PMCU_LEDCS_STRUC;
-#else
-typedef union  _MCU_LEDCS_STRUC {
-	struct	{
-		UCHAR		LedMode:7;
-		UCHAR		Polarity:1;
-	} field;
-	UCHAR			word;
-} MCU_LEDCS_STRUC, *PMCU_LEDCS_STRUC;
-#endif
-// =================================================================================
-// Register format
-// =================================================================================
-
-
-
-//NAV_TIME_CFG :NAV
-#ifdef RT_BIG_ENDIAN
-typedef	union	_NAV_TIME_CFG_STRUC	{
-	struct	{
-		USHORT		rsv:6;
-		USHORT		ZeroSifs:1;               // Applied zero SIFS timer after OFDM RX 0: disable
-		USHORT		Eifs:9;               // in unit of 1-us
-		UCHAR       SlotTime;    // in unit of 1-us
-		UCHAR		Sifs;               // in unit of 1-us
-	}	field;
-	UINT32			word;
-}	NAV_TIME_CFG_STRUC, *PNAV_TIME_CFG_STRUC;
-#else
-typedef	union	_NAV_TIME_CFG_STRUC	{
-	struct	{
-		UCHAR		Sifs;               // in unit of 1-us
-		UCHAR       SlotTime;    // in unit of 1-us
-		USHORT		Eifs:9;               // in unit of 1-us
-		USHORT		ZeroSifs:1;               // Applied zero SIFS timer after OFDM RX 0: disable
-		USHORT		rsv:6;
-	}	field;
-	UINT32			word;
-}	NAV_TIME_CFG_STRUC, *PNAV_TIME_CFG_STRUC;
-#endif
-
-
-
-
-
-//
-// RX_FILTR_CFG:  /RX configuration register
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	RX_FILTR_CFG_STRUC	{
-	struct	{
-		UINT32		:15;
-		UINT32       DropRsvCntlType:1;
-
-        	UINT32       	DropBAR:1;       //
-		UINT32		DropBA:1;		//
-		UINT32		DropPsPoll:1;		// Drop Ps-Poll
-		UINT32		DropRts:1;		// Drop Ps-Poll
-
-		UINT32		DropCts:1;		// Drop Ps-Poll
-		UINT32		DropAck:1;		// Drop Ps-Poll
-		UINT32		DropCFEnd:1;		// Drop Ps-Poll
-		UINT32		DropCFEndAck:1;		// Drop Ps-Poll
-
-		UINT32		DropDuplicate:1;		// Drop duplicate frame
-		UINT32		DropBcast:1;		// Drop broadcast frames
-		UINT32		DropMcast:1;		// Drop multicast frames
-		UINT32		DropVerErr:1;	    // Drop version error frame
-
-		UINT32		DropNotMyBSSID:1;			// Drop fram ToDs bit is true
-		UINT32		DropNotToMe:1;		// Drop not to me unicast frame
-		UINT32		DropPhyErr:1;		// Drop physical error
-		UINT32		DropCRCErr:1;		// Drop CRC error
-	}	field;
-	UINT32			word;
-}	RX_FILTR_CFG_STRUC, *PRX_FILTR_CFG_STRUC;
-#else
-typedef	union	_RX_FILTR_CFG_STRUC	{
-	struct	{
-		UINT32		DropCRCErr:1;		// Drop CRC error
-		UINT32		DropPhyErr:1;		// Drop physical error
-		UINT32		DropNotToMe:1;		// Drop not to me unicast frame
-		UINT32		DropNotMyBSSID:1;			// Drop fram ToDs bit is true
-
-		UINT32		DropVerErr:1;	    // Drop version error frame
-		UINT32		DropMcast:1;		// Drop multicast frames
-		UINT32		DropBcast:1;		// Drop broadcast frames
-		UINT32		DropDuplicate:1;		// Drop duplicate frame
-
-		UINT32		DropCFEndAck:1;		// Drop Ps-Poll
-		UINT32		DropCFEnd:1;		// Drop Ps-Poll
-		UINT32		DropAck:1;		// Drop Ps-Poll
-		UINT32		DropCts:1;		// Drop Ps-Poll
-
-		UINT32		DropRts:1;		// Drop Ps-Poll
-		UINT32		DropPsPoll:1;		// Drop Ps-Poll
-		UINT32		DropBA:1;		//
-        	UINT32       	DropBAR:1;       //
-
-		UINT32       	DropRsvCntlType:1;
-		UINT32		:15;
-	}	field;
-	UINT32			word;
-}	RX_FILTR_CFG_STRUC, *PRX_FILTR_CFG_STRUC;
-#endif
-
-
-
-
-//
-// PHY_CSR4: RF serial control register
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_PHY_CSR4_STRUC	{
-	struct	{
-		UINT32		Busy:1;				// 1: ASIC is busy execute RF programming.
-		UINT32		PLL_LD:1;			// RF PLL_LD status
-		UINT32		IFSelect:1;			// 1: select IF	to program,	0: select RF to	program
-		UINT32		NumberOfBits:5;		// Number of bits used in RFRegValue (I:20,	RFMD:22)
-		UINT32		RFRegValue:24;		// Register	value (include register	id)	serial out to RF/IF	chip.
-	}	field;
-	UINT32			word;
-}	PHY_CSR4_STRUC, *PPHY_CSR4_STRUC;
-#else
-typedef	union	_PHY_CSR4_STRUC	{
-	struct	{
-		UINT32		RFRegValue:24;		// Register	value (include register	id)	serial out to RF/IF	chip.
-		UINT32		NumberOfBits:5;		// Number of bits used in RFRegValue (I:20,	RFMD:22)
-		UINT32		IFSelect:1;			// 1: select IF	to program,	0: select RF to	program
-		UINT32		PLL_LD:1;			// RF PLL_LD status
-		UINT32		Busy:1;				// 1: ASIC is busy execute RF programming.
-	}	field;
-	UINT32			word;
-}	PHY_CSR4_STRUC, *PPHY_CSR4_STRUC;
-#endif
-
-
-//
-// SEC_CSR5: shared key table security mode register
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_SEC_CSR5_STRUC	{
-	struct	{
-        UINT32       :1;
-        UINT32       Bss3Key3CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss3Key2CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss3Key1CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss3Key0CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss2Key3CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss2Key2CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss2Key1CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss2Key0CipherAlg:3;
-	}	field;
-	UINT32			word;
-}	SEC_CSR5_STRUC, *PSEC_CSR5_STRUC;
-#else
-typedef	union	_SEC_CSR5_STRUC	{
-	struct	{
-        UINT32       Bss2Key0CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss2Key1CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss2Key2CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss2Key3CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss3Key0CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss3Key1CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss3Key2CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss3Key3CipherAlg:3;
-        UINT32       :1;
-	}	field;
-	UINT32			word;
-}	SEC_CSR5_STRUC, *PSEC_CSR5_STRUC;
-#endif
-
-
-//
-// HOST_CMD_CSR: For HOST to interrupt embedded processor
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_HOST_CMD_CSR_STRUC	{
-	struct	{
-	    UINT32   Rsv:24;
-	    UINT32   HostCommand:8;
-	}	field;
-	UINT32			word;
-}	HOST_CMD_CSR_STRUC, *PHOST_CMD_CSR_STRUC;
-#else
-typedef	union	_HOST_CMD_CSR_STRUC	{
-	struct	{
-	    UINT32   HostCommand:8;
-	    UINT32   Rsv:24;
-	}	field;
-	UINT32			word;
-}	HOST_CMD_CSR_STRUC, *PHOST_CMD_CSR_STRUC;
-#endif
-
-
-//
-// AIFSN_CSR: AIFSN for each EDCA AC
-//
-
-
-
-//
-// E2PROM_CSR: EEPROM control register
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_E2PROM_CSR_STRUC	{
-	struct	{
-		UINT32		Rsvd:25;
-		UINT32       LoadStatus:1;   // 1:loading, 0:done
-		UINT32		Type:1;			// 1: 93C46, 0:93C66
-		UINT32		EepromDO:1;
-		UINT32		EepromDI:1;
-		UINT32		EepromCS:1;
-		UINT32		EepromSK:1;
-		UINT32		Reload:1;		// Reload EEPROM content, write one to reload, self-cleared.
-	}	field;
-	UINT32			word;
-}	E2PROM_CSR_STRUC, *PE2PROM_CSR_STRUC;
-#else
-typedef	union	_E2PROM_CSR_STRUC	{
-	struct	{
-		UINT32		Reload:1;		// Reload EEPROM content, write one to reload, self-cleared.
-		UINT32		EepromSK:1;
-		UINT32		EepromCS:1;
-		UINT32		EepromDI:1;
-		UINT32		EepromDO:1;
-		UINT32		Type:1;			// 1: 93C46, 0:93C66
-		UINT32       LoadStatus:1;   // 1:loading, 0:done
-		UINT32		Rsvd:25;
-	}	field;
-	UINT32			word;
-}	E2PROM_CSR_STRUC, *PE2PROM_CSR_STRUC;
-#endif
-
-
-// -------------------------------------------------------------------
-//  E2PROM data layout
-// -------------------------------------------------------------------
-
-//
-// EEPROM antenna select format
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_EEPROM_ANTENNA_STRUC	{
-	struct	{
-		USHORT      Rsv:4;
-		USHORT      RfIcType:4;             // see E2PROM document
-		USHORT		TxPath:4;	// 1: 1T, 2: 2T
-		USHORT		RxPath:4;	// 1: 1R, 2: 2R, 3: 3R
-	}	field;
-	USHORT			word;
-}	EEPROM_ANTENNA_STRUC, *PEEPROM_ANTENNA_STRUC;
-#else
-typedef	union	_EEPROM_ANTENNA_STRUC	{
-	struct	{
-		USHORT		RxPath:4;	// 1: 1R, 2: 2R, 3: 3R
-		USHORT		TxPath:4;	// 1: 1T, 2: 2T
-		USHORT      RfIcType:4;             // see E2PROM document
-		USHORT      Rsv:4;
-	}	field;
-	USHORT			word;
-}	EEPROM_ANTENNA_STRUC, *PEEPROM_ANTENNA_STRUC;
-#endif
-
-#ifdef RT_BIG_ENDIAN
-typedef	union _EEPROM_NIC_CINFIG2_STRUC	{
-	struct	{
-        USHORT		Rsv2:6;					// must be 0
-		USHORT		BW40MAvailForA:1;			// 0:enable, 1:disable
-		USHORT		BW40MAvailForG:1;			// 0:enable, 1:disable
-		USHORT		EnableWPSPBC:1;                 // WPS PBC Control bit
-		USHORT		BW40MSidebandForA:1;
-		USHORT		BW40MSidebandForG:1;
-		USHORT		CardbusAcceleration:1;	// !!! NOTE: 0 - enable, 1 - disable
-		USHORT		ExternalLNAForA:1;			// external LNA enable for 5G
-		USHORT		ExternalLNAForG:1;			// external LNA enable for 2.4G
-		USHORT		DynamicTxAgcControl:1;			//
-		USHORT		HardwareRadioControl:1;	// Whether RF is controlled by driver or HW. 1:enable hw control, 0:disable
-	}	field;
-	USHORT			word;
-}	EEPROM_NIC_CONFIG2_STRUC, *PEEPROM_NIC_CONFIG2_STRUC;
-#else
-typedef	union _EEPROM_NIC_CINFIG2_STRUC	{
-	struct {
-		USHORT		HardwareRadioControl:1;	// 1:enable, 0:disable
-		USHORT		DynamicTxAgcControl:1;			//
-		USHORT		ExternalLNAForG:1;				//
-		USHORT		ExternalLNAForA:1;			// external LNA enable for 2.4G
-		USHORT		CardbusAcceleration:1;	// !!! NOTE: 0 - enable, 1 - disable
-		USHORT		BW40MSidebandForG:1;
-		USHORT		BW40MSidebandForA:1;
-		USHORT		EnableWPSPBC:1;                 // WPS PBC Control bit
-		USHORT		BW40MAvailForG:1;			// 0:enable, 1:disable
-		USHORT		BW40MAvailForA:1;			// 0:enable, 1:disable
-		USHORT		Rsv2:6;                 // must be 0
-	}	field;
-	USHORT			word;
-}	EEPROM_NIC_CONFIG2_STRUC, *PEEPROM_NIC_CONFIG2_STRUC;
-#endif
-
-//
-// TX_PWR Value valid range 0xFA(-6) ~ 0x24(36)
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_EEPROM_TX_PWR_STRUC	{
-	struct	{
-		CHAR	Byte1;				// High Byte
-		CHAR	Byte0;				// Low Byte
-	}	field;
-	USHORT	word;
-}	EEPROM_TX_PWR_STRUC, *PEEPROM_TX_PWR_STRUC;
-#else
-typedef	union	_EEPROM_TX_PWR_STRUC	{
-	struct	{
-		CHAR	Byte0;				// Low Byte
-		CHAR	Byte1;				// High Byte
-	}	field;
-	USHORT	word;
-}	EEPROM_TX_PWR_STRUC, *PEEPROM_TX_PWR_STRUC;
-#endif
-
-#ifdef RT_BIG_ENDIAN
-typedef	union	_EEPROM_VERSION_STRUC	{
-	struct	{
-		UCHAR	Version;			// High Byte
-		UCHAR	FaeReleaseNumber;	// Low Byte
-	}	field;
-	USHORT	word;
-}	EEPROM_VERSION_STRUC, *PEEPROM_VERSION_STRUC;
-#else
-typedef	union	_EEPROM_VERSION_STRUC	{
-	struct	{
-		UCHAR	FaeReleaseNumber;	// Low Byte
-		UCHAR	Version;			// High Byte
-	}	field;
-	USHORT	word;
-}	EEPROM_VERSION_STRUC, *PEEPROM_VERSION_STRUC;
-#endif
-
-#ifdef RT_BIG_ENDIAN
-typedef	union	_EEPROM_LED_STRUC	{
-	struct	{
-		USHORT	Rsvd:3;				// Reserved
-		USHORT	LedMode:5;			// Led mode.
-		USHORT	PolarityGPIO_4:1;	// Polarity GPIO#4 setting.
-		USHORT	PolarityGPIO_3:1;	// Polarity GPIO#3 setting.
-		USHORT	PolarityGPIO_2:1;	// Polarity GPIO#2 setting.
-		USHORT	PolarityGPIO_1:1;	// Polarity GPIO#1 setting.
-		USHORT	PolarityGPIO_0:1;	// Polarity GPIO#0 setting.
-		USHORT	PolarityACT:1;		// Polarity ACT setting.
-		USHORT	PolarityRDY_A:1;		// Polarity RDY_A setting.
-		USHORT	PolarityRDY_G:1;		// Polarity RDY_G setting.
-	}	field;
-	USHORT	word;
-}	EEPROM_LED_STRUC, *PEEPROM_LED_STRUC;
-#else
-typedef	union	_EEPROM_LED_STRUC	{
-	struct	{
-		USHORT	PolarityRDY_G:1;		// Polarity RDY_G setting.
-		USHORT	PolarityRDY_A:1;		// Polarity RDY_A setting.
-		USHORT	PolarityACT:1;		// Polarity ACT setting.
-		USHORT	PolarityGPIO_0:1;	// Polarity GPIO#0 setting.
-		USHORT	PolarityGPIO_1:1;	// Polarity GPIO#1 setting.
-		USHORT	PolarityGPIO_2:1;	// Polarity GPIO#2 setting.
-		USHORT	PolarityGPIO_3:1;	// Polarity GPIO#3 setting.
-		USHORT	PolarityGPIO_4:1;	// Polarity GPIO#4 setting.
-		USHORT	LedMode:5;			// Led mode.
-		USHORT	Rsvd:3;				// Reserved
-	}	field;
-	USHORT	word;
-}	EEPROM_LED_STRUC, *PEEPROM_LED_STRUC;
-#endif
-
-#ifdef RT_BIG_ENDIAN
-typedef	union	_EEPROM_TXPOWER_DELTA_STRUC	{
-	struct	{
-		UCHAR	TxPowerEnable:1;// Enable
-		UCHAR	Type:1;			// 1: plus the delta value, 0: minus the delta value
-		UCHAR	DeltaValue:6;	// Tx Power dalta value (MAX=4)
-	}	field;
-	UCHAR	value;
-}	EEPROM_TXPOWER_DELTA_STRUC, *PEEPROM_TXPOWER_DELTA_STRUC;
-#else
-typedef	union	_EEPROM_TXPOWER_DELTA_STRUC	{
-	struct	{
-		UCHAR	DeltaValue:6;	// Tx Power dalta value (MAX=4)
-		UCHAR	Type:1;			// 1: plus the delta value, 0: minus the delta value
-		UCHAR	TxPowerEnable:1;// Enable
-	}	field;
-	UCHAR	value;
-}	EEPROM_TXPOWER_DELTA_STRUC, *PEEPROM_TXPOWER_DELTA_STRUC;
-#endif
-
-//
-// QOS_CSR0: TXOP holder address0 register
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_QOS_CSR0_STRUC	{
-	struct	{
-		UCHAR		Byte3;		// MAC address byte 3
-		UCHAR		Byte2;		// MAC address byte 2
-		UCHAR		Byte1;		// MAC address byte 1
-		UCHAR		Byte0;		// MAC address byte 0
-	}	field;
-	UINT32			word;
-}	QOS_CSR0_STRUC, *PQOS_CSR0_STRUC;
-#else
-typedef	union	_QOS_CSR0_STRUC	{
-	struct	{
-		UCHAR		Byte0;		// MAC address byte 0
-		UCHAR		Byte1;		// MAC address byte 1
-		UCHAR		Byte2;		// MAC address byte 2
-		UCHAR		Byte3;		// MAC address byte 3
-	}	field;
-	UINT32			word;
-}	QOS_CSR0_STRUC, *PQOS_CSR0_STRUC;
-#endif
-
-//
-// QOS_CSR1: TXOP holder address1 register
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_QOS_CSR1_STRUC	{
-	struct	{
-		UCHAR		Rsvd1;
-		UCHAR		Rsvd0;
-		UCHAR		Byte5;		// MAC address byte 5
-		UCHAR		Byte4;		// MAC address byte 4
-	}	field;
-	UINT32			word;
-}	QOS_CSR1_STRUC, *PQOS_CSR1_STRUC;
-#else
-typedef	union	_QOS_CSR1_STRUC	{
-	struct	{
-		UCHAR		Byte4;		// MAC address byte 4
-		UCHAR		Byte5;		// MAC address byte 5
-		UCHAR		Rsvd0;
-		UCHAR		Rsvd1;
-	}	field;
-	UINT32			word;
-}	QOS_CSR1_STRUC, *PQOS_CSR1_STRUC;
-#endif
-
-#define	RF_CSR_CFG	0x500
-#ifdef RT_BIG_ENDIAN
-typedef	union	_RF_CSR_CFG_STRUC	{
-	struct	{
-		UINT	Rsvd1:14;				// Reserved
-		UINT	RF_CSR_KICK:1;			// kick RF register read/write
-		UINT	RF_CSR_WR:1;			// 0: read  1: write
-		UINT	Rsvd2:3;				// Reserved
-		UINT	TESTCSR_RFACC_REGNUM:5;	// RF register ID
-		UINT	RF_CSR_DATA:8;			// DATA
-	}	field;
-	UINT	word;
-}	RF_CSR_CFG_STRUC, *PRF_CSR_CFG_STRUC;
-#else
-typedef	union	_RF_CSR_CFG_STRUC	{
-	struct	{
-		UINT	RF_CSR_DATA:8;			// DATA
-		UINT	TESTCSR_RFACC_REGNUM:5;	// RF register ID
-		UINT	Rsvd2:3;				// Reserved
-		UINT	RF_CSR_WR:1;			// 0: read  1: write
-		UINT	RF_CSR_KICK:1;			// kick RF register read/write
-		UINT	Rsvd1:14;				// Reserved
-	}	field;
-	UINT	word;
-}	RF_CSR_CFG_STRUC, *PRF_CSR_CFG_STRUC;
-#endif
-
-#endif	// __RT28XX_H__
+#include "../rt2860/rt28xx.h"
diff --git a/drivers/staging/rt2870/rt_ate.c b/drivers/staging/rt2870/rt_ate.c
deleted file mode 100644
index 27c763ee927..00000000000
--- a/drivers/staging/rt2870/rt_ate.c
+++ /dev/null
@@ -1,6452 +0,0 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-#include "rt_config.h"
-
-#ifdef UCOS
-INT IoctlResponse(PUCHAR payload, PUCHAR msg, INT len);
-#endif // UCOS //
-
-#ifdef RALINK_ATE
-UCHAR TemplateFrame[24] = {0x08/* Data type */,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0xAA,0xBB,0x12,0x34,0x56,0x00,0x11,0x22,0xAA,0xBB,0xCC,0x00,0x00};	// 802.11 MAC Header, Type:Data, Length:24bytes
-extern RTMP_RF_REGS RF2850RegTable[];
-extern UCHAR NUM_OF_2850_CHNL;
-
-#ifdef RT2870
-extern UCHAR EpToQueue[];
-extern VOID	RTUSBRejectPendingPackets(	IN	PRTMP_ADAPTER	pAd);
-#endif // RT2870 //
-
-#ifdef UCOS
-extern INT ConsoleResponse(IN PUCHAR buff);
-extern int (*remote_display)(char *);
-#endif // UCOS //
-
-static CHAR CCKRateTable[] = {0, 1, 2, 3, 8, 9, 10, 11, -1}; /* CCK Mode. */
-static CHAR OFDMRateTable[] = {0, 1, 2, 3, 4, 5, 6, 7, -1}; /* OFDM Mode. */
-static CHAR HTMIXRateTable[] = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1}; /* HT Mix Mode. */
-
-static INT TxDmaBusy(
-	IN PRTMP_ADAPTER pAd);
-
-static INT RxDmaBusy(
-	IN PRTMP_ADAPTER pAd);
-
-static VOID RtmpDmaEnable(
-	IN PRTMP_ADAPTER pAd,
-	IN INT Enable);
-
-static VOID BbpSoftReset(
-	IN PRTMP_ADAPTER pAd);
-
-static VOID RtmpRfIoWrite(
-	IN PRTMP_ADAPTER pAd);
-
-static INT ATESetUpFrame(
-	IN PRTMP_ADAPTER pAd,
-	IN UINT32 TxIdx);
-
-static INT ATETxPwrHandler(
-	IN PRTMP_ADAPTER pAd,
-	IN char index);
-
-static INT ATECmdHandler(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-static int CheckMCSValid(
-	IN UCHAR Mode,
-	IN UCHAR Mcs);
-
-
-#ifdef RT2870
-static VOID ATEWriteTxInfo(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PTXINFO_STRUC 	pTxInfo,
-	IN	  USHORT		USBDMApktLen,
-	IN	  BOOLEAN		bWiv,
-	IN	  UCHAR			QueueSel,
-	IN	  UCHAR			NextValid,
-	IN	  UCHAR			TxBurst);
-
-static VOID ATEWriteTxWI(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PTXWI_STRUC 	pTxWI,
-	IN	BOOLEAN			FRAG,
-	IN	BOOLEAN			InsTimestamp,
-	IN	BOOLEAN 		AMPDU,
-	IN	BOOLEAN 		Ack,
-	IN	BOOLEAN 		NSeq,		// HW new a sequence.
-	IN	UCHAR			BASize,
-	IN	UCHAR			WCID,
-	IN	ULONG			Length,
-	IN	UCHAR 			PID,
-	IN	UCHAR			MIMOps,
-	IN	UCHAR			Txopmode,
-	IN	BOOLEAN			CfAck,
-	IN	HTTRANSMIT_SETTING	Transmit);
-
-#endif // RT2870 //
-
-static VOID SetJapanFilter(
-	IN	PRTMP_ADAPTER	pAd);
-
-/*=========================end of prototype=========================*/
-
-
-#ifdef RT2870
-static INT TxDmaBusy(
-	IN PRTMP_ADAPTER pAd)
-{
-	INT result;
-	USB_DMA_CFG_STRUC UsbCfg;
-
-	RTMP_IO_READ32(pAd, USB_DMA_CFG, &UsbCfg.word);	// disable DMA
-	if (UsbCfg.field.TxBusy)
-		result = 1;
-	else
-		result = 0;
-
-	return result;
-}
-
-static INT RxDmaBusy(
-	IN PRTMP_ADAPTER pAd)
-{
-	INT result;
-	USB_DMA_CFG_STRUC UsbCfg;
-
-	RTMP_IO_READ32(pAd, USB_DMA_CFG, &UsbCfg.word);	// disable DMA
-	if (UsbCfg.field.RxBusy)
-		result = 1;
-	else
-		result = 0;
-
-	return result;
-}
-
-static VOID RtmpDmaEnable(
-	IN PRTMP_ADAPTER pAd,
-	IN INT Enable)
-{
-	BOOLEAN value;
-	ULONG WaitCnt;
-	USB_DMA_CFG_STRUC UsbCfg;
-
-	value = Enable > 0 ? 1 : 0;
-
-	// check DMA is in busy mode.
-	WaitCnt = 0;
-	while (TxDmaBusy(pAd) || RxDmaBusy(pAd))
-	{
-		RTMPusecDelay(10);
-		if (WaitCnt++ > 100)
-			break;
-	}
-
-	//Why not to clear USB DMA TX path first ???
-	RTMP_IO_READ32(pAd, USB_DMA_CFG, &UsbCfg.word);	// disable DMA
-	UsbCfg.field.TxBulkEn = value;
-	UsbCfg.field.RxBulkEn = value;
-	RTMP_IO_WRITE32(pAd, USB_DMA_CFG, UsbCfg.word);	// abort all TX rings
-	RTMPusecDelay(5000);
-
-	return;
-}
-#endif // RT2870 //
-
-static VOID BbpSoftReset(
-	IN PRTMP_ADAPTER pAd)
-{
-	UCHAR BbpData = 0;
-
-	// Soft reset, set BBP R21 bit0=1->0
-	ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R21, &BbpData);
-	BbpData |= 0x00000001; //set bit0=1
-	ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R21, BbpData);
-
-	ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R21, &BbpData);
-	BbpData &= ~(0x00000001); //set bit0=0
-	ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R21, BbpData);
-
-	return;
-}
-
-static VOID RtmpRfIoWrite(
-	IN PRTMP_ADAPTER pAd)
-{
-	// Set RF value 1's set R3[bit2] = [0]
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1);
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2);
-	RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 & (~0x04)));
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4);
-
-	RTMPusecDelay(200);
-
-	// Set RF value 2's set R3[bit2] = [1]
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1);
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2);
-	RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 | 0x04));
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4);
-
-	RTMPusecDelay(200);
-
-	// Set RF value 3's set R3[bit2] = [0]
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1);
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2);
-	RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 & (~0x04)));
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4);
-
-	return;
-}
-
-static int CheckMCSValid(
-	UCHAR Mode,
-	UCHAR Mcs)
-{
-	int i;
-	PCHAR pRateTab;
-
-	switch(Mode)
-	{
-		case 0:
-			pRateTab = CCKRateTable;
-			break;
-		case 1:
-			pRateTab = OFDMRateTable;
-			break;
-		case 2:
-		case 3:
-			pRateTab = HTMIXRateTable;
-			break;
-		default:
-			ATEDBGPRINT(RT_DEBUG_ERROR, ("unrecognizable Tx Mode %d\n", Mode));
-			return -1;
-			break;
-	}
-
-	i = 0;
-	while(pRateTab[i] != -1)
-	{
-		if (pRateTab[i] == Mcs)
-			return 0;
-		i++;
-	}
-
-	return -1;
-}
-
-#if 1
-static INT ATETxPwrHandler(
-	IN PRTMP_ADAPTER pAd,
-	IN char index)
-{
-	ULONG R;
-	CHAR TxPower;
-	UCHAR Bbp94 = 0;
-	BOOLEAN bPowerReduce = FALSE;
-
-#ifdef RALINK_28xx_QA
-	if ((pAd->ate.bQATxStart == TRUE) || (pAd->ate.bQARxStart == TRUE))
-	{
-		/* When QA is used for Tx, pAd->ate.TxPower0/1 and real tx power
-		** are not synchronized.
-		*/
-/*
-		pAd->ate.TxPower0 = pAd->LatchRfRegs.xxx;
-		pAd->ate.TxPower1 = pAd->LatchRfRegs.xxx;
-*/
-		return 0;
-	}
-	else
-#endif // RALINK_28xx_QA //
-	{
-		TxPower = index == 0 ? pAd->ate.TxPower0 : pAd->ate.TxPower1;
-
-		if (pAd->ate.Channel <= 14)
-		{
-			if (TxPower > 31)
-			{
-				//
-				// R3, R4 can't large than 31 (0x24), 31 ~ 36 used by BBP 94
-				//
-				R = 31;
-				if (TxPower <= 36)
-					Bbp94 = BBPR94_DEFAULT + (UCHAR)(TxPower - 31);
-			}
-			else if (TxPower < 0)
-			{
-				//
-				// R3, R4 can't less than 0, -1 ~ -6 used by BBP 94
-				//
-				R = 0;
-				if (TxPower >= -6)
-					Bbp94 = BBPR94_DEFAULT + TxPower;
-			}
-			else
-			{
-				// 0 ~ 31
-				R = (ULONG) TxPower;
-				Bbp94 = BBPR94_DEFAULT;
-			}
-
-			ATEDBGPRINT(RT_DEBUG_TRACE, ("%s (TxPower=%d, R=%ld, BBP_R94=%d)\n", __func__, TxPower, R, Bbp94));
-		}
-		else// 5.5 GHz
-		{
-			if (TxPower > 15)
-			{
-				//
-				// R3, R4 can't large than 15 (0x0F)
-				//
-				R = 15;
-			}
-			else if (TxPower < 0)
-			{
-				//
-				// R3, R4 can't less than 0
-				//
-				// -1 ~ -7
-				ASSERT((TxPower >= -7));
-				R = (ULONG)(TxPower + 7);
-				bPowerReduce = TRUE;
-			}
-			else
-			{
-				// 0 ~ 15
-				R = (ULONG) TxPower;
-			}
-
-			ATEDBGPRINT(RT_DEBUG_TRACE, ("%s (TxPower=%d, R=%lu)\n", __func__, TxPower, R));
-		}
-
-		if (pAd->ate.Channel <= 14)
-		{
-			if (index == 0)
-			{
-				R = R << 9;		// shift TX power control to correct RF(R3) register bit position
-				R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
-				pAd->LatchRfRegs.R3 = R;
-			}
-			else
-			{
-				R = R << 6;		// shift TX power control to correct RF(R4) register bit position
-				R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
-				pAd->LatchRfRegs.R4 = R;
-			}
-		}
-		else// 5.5GHz
-		{
-			if (bPowerReduce == FALSE)
-			{
-				if (index == 0)
-				{
-					R = (R << 10) | (1 << 9);		// shift TX power control to correct RF(R3) register bit position
-					R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
-					pAd->LatchRfRegs.R3 = R;
-				}
-				else
-				{
-					R = (R << 7) | (1 << 6);		// shift TX power control to correct RF(R4) register bit position
-					R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
-					pAd->LatchRfRegs.R4 = R;
-				}
-			}
-			else
-			{
-				if (index == 0)
-				{
-					R = (R << 10);		// shift TX power control to correct RF(R3) register bit position
-					R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
-
-					/* Clear bit 9 of R3 to reduce 7dB. */
-					pAd->LatchRfRegs.R3 = (R & (~(1 << 9)));
-				}
-				else
-				{
-					R = (R << 7);		// shift TX power control to correct RF(R4) register bit position
-					R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
-
-					/* Clear bit 6 of R4 to reduce 7dB. */
-					pAd->LatchRfRegs.R4 = (R & (~(1 << 6)));
-				}
-			}
-		}
-
-		RtmpRfIoWrite(pAd);
-
-		return 0;
-	}
-}
-#else// 1 //
-static INT ATETxPwrHandler(
-	IN PRTMP_ADAPTER pAd,
-	IN char index)
-{
-	ULONG R;
-	CHAR TxPower;
-	UCHAR Bbp94 = 0;
-
-#ifdef RALINK_28xx_QA
-	if ((pAd->ate.bQATxStart == TRUE) || (pAd->ate.bQARxStart == TRUE))
-	{
-		// TODO: how to get current TxPower0/1 from pAd->LatchRfRegs ?
-		/* When QA is used for Tx, pAd->ate.TxPower0/1 and real tx power
-		** are not synchronized.
-		*/
-/*
-		pAd->ate.TxPower0 = pAd->LatchRfRegs.xxx;
-		pAd->ate.TxPower1 = pAd->LatchRfRegs.xxx;
-*/
-		return 0;
-	}
-	else
-#endif // RALINK_28xx_QA //
-	{
-		TxPower = index == 0 ? pAd->ate.TxPower0 : pAd->ate.TxPower1;
-
-	if (TxPower > 31)
-	{
-		//
-		// R3, R4 can't large than 36 (0x24), 31 ~ 36 used by BBP 94
-		//
-		R = 31;
-		if (TxPower <= 36)
-			Bbp94 = BBPR94_DEFAULT + (UCHAR)(TxPower - 31);
-	}
-	else if (TxPower < 0)
-	{
-		//
-		// R3, R4 can't less than 0, -1 ~ -6 used by BBP 94
-		//
-		R = 0;
-		if (TxPower >= -6)
-			Bbp94 = BBPR94_DEFAULT + TxPower;
-	}
-	else
-	{
-		// 0 ~ 31
-		R = (ULONG) TxPower;
-		Bbp94 = BBPR94_DEFAULT;
-	}
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("%s (TxPower=%d, R3=%ld, BBP_R94=%d)\n", __func__, TxPower, R, Bbp94));
-
-		if (pAd->ate.Channel <= 14)
-		{
-	if (index == 0)
-	{
-		R = R << 9;		// shift TX power control to correct RF(R3) register bit position
-		R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
-		pAd->LatchRfRegs.R3 = R;
-	}
-	else
-	{
-		R = R << 6;		// shift TX power control to correct RF(R4) register bit position
-		R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
-		pAd->LatchRfRegs.R4 = R;
-	}
-		}
-		else
-		{
-			if (index == 0)
-			{
-				R = (R << 10) | (1 << 9);		// shift TX power control to correct RF(R3) register bit position
-				R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
-				pAd->LatchRfRegs.R3 = R;
-			}
-			else
-			{
-				R = (R << 7) | (1 << 6);		// shift TX power control to correct RF(R4) register bit position
-				R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
-				pAd->LatchRfRegs.R4 = R;
-			}
-		}
-
-	RtmpRfIoWrite(pAd);
-
-	return 0;
-	}
-}
-#endif // 1 //
-/*
-    ==========================================================================
-    Description:
-        Set ATE operation mode to
-        0. ATESTART  = Start ATE Mode
-        1. ATESTOP   = Stop ATE Mode
-        2. TXCONT    = Continuous Transmit
-        3. TXCARR    = Transmit Carrier
-        4. TXFRAME   = Transmit Frames
-        5. RXFRAME   = Receive Frames
-#ifdef RALINK_28xx_QA
-        6. TXSTOP    = Stop Any Type of Transmition
-        7. RXSTOP    = Stop Receiving Frames
-#endif // RALINK_28xx_QA //
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-/*                                                           */
-/*                                                           */
-/*=======================End of RT2860=======================*/
-
-
-/*======================Start of RT2870======================*/
-/*                                                           */
-/*                                                           */
-
-#ifdef RT2870
-static INT	ATECmdHandler(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UINT32			Value;
-	UCHAR			BbpData;
-	UINT32          MacData;
-	UINT			i=0, atemode;
-	//NDIS_STATUS		Status = NDIS_STATUS_SUCCESS;
-	//PUCHAR			pDest;
-	UINT32 			temp;
-	ULONG			IrqFlags;
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("===> ATECmdHandler()\n"));
-	ATEAsicSwitchChannel(pAd);
-	/* AsicLockChannel() is empty function so far in fact */
-	AsicLockChannel(pAd, pAd->ate.Channel);
-
-	RTMPusecDelay(5000);
-
-	// Default value in BBP R22 is 0x0.
-	BbpData = 0;
-
-	/* Enter ATE mode and set Tx/Rx Idle */
-	if (!strcmp(arg, "ATESTART"))
-	{
-#ifdef CONFIG_STA_SUPPORT
-		BOOLEAN       Cancelled;
-#endif // CONFIG_STA_SUPPORT //
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: ATESTART\n"));
-
-		netif_stop_queue(pAd->net_dev);
-
-		atemode = pAd->ate.Mode;
-		pAd->ate.Mode = ATE_START;
-//		pAd->ate.TxDoneCount = pAd->ate.TxCount;
-		// Disable Rx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// Disable auto responder
-		RTMP_IO_READ32(pAd, AUTO_RSP_CFG, &temp);
-		temp = temp & 0xFFFFFFFE;
-		RTMP_IO_WRITE32(pAd, AUTO_RSP_CFG, temp);
-
-		// read MAC_SYS_CTRL and backup MAC_SYS_CTRL value.
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
-		// clean bit4 to stop continuous Tx production test.
-		MacData &= 0xFFFFFFEF;
-		// Stop continuous TX production test.
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);//disable or cancel pending irp first ???
-
-        if (atemode & ATE_TXCARR)
-		{
-			// No Carrier Test set BBP R22 bit7=0, bit6=0, bit[5~0]=0x0
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-			BbpData &= 0xFFFFFF00; //clear bit7, bit6, bit[5~0]
-		    ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-		}
-		else if (atemode & ATE_TXCARRSUPP)
-		{
-			// No Cont. TX set BBP R22 bit7=0
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-			BbpData &= ~(1 << 7); //set bit7=0
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-
-			// No Carrier Suppression set BBP R24 bit0=0
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R24, &BbpData);
-			BbpData &= 0xFFFFFFFE; //clear bit0
-		    ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, BbpData);
-		}
-		// We should free some resource which allocate when ATE_TXFRAME , ATE_STOP, and ATE_TXCONT.
-		// TODO:Should we free some resource which was allocated when LoopBack and ATE_STOP ?
-		else if ((atemode & ATE_TXFRAME) || (atemode == ATE_STOP))
-		{
-			if (atemode & ATE_TXCONT)
-			{
-				// Not Cont. TX anymore, so set BBP R22 bit7=0
-				ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-				BbpData &= ~(1 << 7); //set bit7=0
-				ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-			}
-			// Abort Tx, Rx DMA.
-			RtmpDmaEnable(pAd, 0);
-
-			{
-				// It seems nothing to free,
-				// because we didn't allocate any resource when we entered ATE_TXFRAME mode latestly.
-			}
-
-			// Start Tx, RX DMA
-			RtmpDmaEnable(pAd, 1);
-		}
-
-		RTUSBRejectPendingPackets(pAd);
-		RTUSBCleanUpDataBulkOutQueue(pAd);
-
-#ifdef CONFIG_STA_SUPPORT
-		//
-		// It will be called in MlmeSuspend().
-		//
-		// Cancel pending timers
-		RTMPCancelTimer(&pAd->MlmeAux.AssocTimer,     &Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.ReassocTimer,   &Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.DisassocTimer,   &Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.AuthTimer,       &Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer,     &Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.ScanTimer,       &Cancelled);
-#endif // CONFIG_STA_SUPPORT //
-
-		//RTUSBCleanUpMLMEWaitQueue(pAd);	/* not used in RT28xx */
-		RTUSBCleanUpMLMEBulkOutQueue(pAd);
-
-		// Sometimes kernel will hang on, so we avoid calling MlmeSuspend().
-//		MlmeSuspend(pAd, TRUE);
-		//RTMPCancelTimer(&pAd->Mlme.PeriodicTimer, &Cancelled);
-
-		// Disable Rx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// Abort Tx, RX DMA.
-		RtmpDmaEnable(pAd, 0);
-
-		// Disable Tx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 2);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// Make sure there are no pending bulk in/out IRPs before we go on.
-/*=========================================================================*/
-		/* pAd->PendingRx is not of type atomic_t anymore in 28xx */
-//		while ((atomic_read(&pAd->PendingRx) > 0))	//pAd->BulkFlags != 0 wait bulk out finish
-		while ((pAd->PendingRx > 0))	//pAd->BulkFlags != 0 wait bulk out finish
-		{
-#if 1
-			ATE_RTUSBCancelPendingBulkInIRP(pAd);
-#else
-			NdisInterlockedDecrement(&pAd->PendingRx);
-#endif
-			/* delay 0.5 seconds */
-			RTMPusecDelay(500000);
-			pAd->PendingRx = 0;
-		}
-		/* peter : why don't we have to get BulkOutLock first ? */
-		while (((pAd->BulkOutPending[0] == TRUE) ||
-				(pAd->BulkOutPending[1] == TRUE) ||
-				(pAd->BulkOutPending[2] == TRUE) ||
-				(pAd->BulkOutPending[3] == TRUE)) && (pAd->BulkFlags != 0))	//pAd->BulkFlags != 0 wait bulk out finish
-		{
-			do
-			{
-				/* pAd->BulkOutPending[y] will be set to FALSE in RTUSBCancelPendingBulkOutIRP(pAd) */
-				RTUSBCancelPendingBulkOutIRP(pAd);
-			} while (FALSE);
-
-			/* we have enough time delay in RTUSBCancelPendingBulkOutIRP(pAd)
-			** so this is not necessary
-			*/
-//			RTMPusecDelay(500000);
-		}
-
-		/* pAd->PendingRx is not of type atomic_t anymore in 28xx */
-//		ASSERT(atomic_read(&pAd->PendingRx) == 0);
-		ASSERT(pAd->PendingRx == 0);
-/*=========================================================================*/
-
-		// reset Rx statistics.
-		pAd->ate.LastSNR0 = 0;
-		pAd->ate.LastSNR1 = 0;
-		pAd->ate.LastRssi0 = 0;
-		pAd->ate.LastRssi1 = 0;
-		pAd->ate.LastRssi2 = 0;
-		pAd->ate.AvgRssi0 = 0;
-		pAd->ate.AvgRssi1 = 0;
-		pAd->ate.AvgRssi2 = 0;
-		pAd->ate.AvgRssi0X8 = 0;
-		pAd->ate.AvgRssi1X8 = 0;
-		pAd->ate.AvgRssi2X8 = 0;
-		pAd->ate.NumOfAvgRssiSample = 0;
-
-#ifdef RALINK_28xx_QA
-		// Tx frame
-		pAd->ate.bQATxStart = FALSE;
-		pAd->ate.bQARxStart = FALSE;
-		pAd->ate.seq = 0;
-
-		// counters
-		pAd->ate.U2M = 0;
-		pAd->ate.OtherData = 0;
-		pAd->ate.Beacon = 0;
-		pAd->ate.OtherCount = 0;
-		pAd->ate.TxAc0 = 0;
-		pAd->ate.TxAc1 = 0;
-		pAd->ate.TxAc2 = 0;
-		pAd->ate.TxAc3 = 0;
-		pAd->ate.TxHCCA = 0;
-		pAd->ate.TxMgmt = 0;
-		pAd->ate.RSSI0 = 0;
-		pAd->ate.RSSI1 = 0;
-		pAd->ate.RSSI2 = 0;
-		pAd->ate.SNR0 = 0;
-		pAd->ate.SNR1 = 0;
-
-		// control
-		pAd->ate.TxDoneCount = 0;
-		pAd->ate.TxStatus = 0; // task Tx status // 0 --> task is idle, 1 --> task is running
-#endif // RALINK_28xx_QA //
-
-		// Soft reset BBP.
-		BbpSoftReset(pAd);
-
-
-#ifdef CONFIG_STA_SUPPORT
-		AsicDisableSync(pAd);
-
-		/*
-		** If we skip "LinkDown()", we should disable protection
-		** to prevent from sending out RTS or CTS-to-self.
-		*/
-		ATEDisableAsicProtect(pAd);
-		RTMPStationStop(pAd);
-#endif // CONFIG_STA_SUPPORT //
-
-		// Default value in BBP R22 is 0x0.
-		BbpData = 0;
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
-
-		// Clean bit4 to stop continuous Tx production test.
-		MacData &= 0xFFFFFFEF;
-	   	ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-	    	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
-		//Clean ATE Bulk in/out counter and continue setup
-		InterlockedExchange(&pAd->BulkOutRemained, 0);
-
-		/* NdisAcquireSpinLock()/NdisReleaseSpinLock() need only one argument in RT28xx */
-		NdisAcquireSpinLock(&pAd->GenericLock);
-		pAd->ContinBulkOut = FALSE;
-		pAd->ContinBulkIn = FALSE;
-		NdisReleaseSpinLock(&pAd->GenericLock);
-
-		RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE);
-	}
-	else if (!strcmp(arg, "ATESTOP"))
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE : ATESTOP ===>\n"));
-
-		// Default value in BBP R22 is 0x0.
-		BbpData = 0;
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);//0820
-		// Clean bit4 to stop continuous Tx production test.
-		MacData &= 0xFFFFFFEF;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData); // recover the MAC_SYS_CTRL register back.
-
-		// Disable Rx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		/*
-		** Abort Tx, RX DMA.
-		** Q   : How to do the following I/O if Tx, Rx DMA is aborted ?
-		** Ans : Bulk endpoints are aborted, while the control endpoint is not.
-		*/
-		RtmpDmaEnable(pAd, 0);
-
-		// Disable Tx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 2);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		/* Make sure there are no pending bulk in/out IRPs before we go on. */
-/*=========================================================================*/
-//		while ((atomic_read(&pAd->PendingRx) > 0))	//pAd->BulkFlags != 0 wait bulk out finish
-		while (pAd->PendingRx > 0)
-		{
-#if 1
-			ATE_RTUSBCancelPendingBulkInIRP(pAd);
-#else
-//			NdisInterlockedDecrement(&pAd->PendingRx);
-			pAd->PendingRx--;
-#endif
-			RTMPusecDelay(500000);
-		}
-
-		while (((pAd->BulkOutPending[0] == TRUE) ||
-				(pAd->BulkOutPending[1] == TRUE) ||
-				(pAd->BulkOutPending[2] == TRUE) ||
-				(pAd->BulkOutPending[3] == TRUE)) && (pAd->BulkFlags != 0))	//pAd->BulkFlags != 0 wait bulk out finish
-		{
-			do
-			{
-				RTUSBCancelPendingBulkOutIRP(pAd);
-			} while (FALSE);
-
-			RTMPusecDelay(500000);
-		}
-
-//		ASSERT(atomic_read(&pAd->PendingRx) == 0);
-		ASSERT(pAd->PendingRx == 0);
-/*=========================================================================*/
-/*      Reset Rx RING                                                      */
-/*=========================================================================*/
-//		InterlockedExchange(&pAd->PendingRx, 0);
-		pAd->PendingRx = 0;
-		pAd->NextRxBulkInReadIndex = 0;	// Next Rx Read index
-		pAd->NextRxBulkInIndex = RX_RING_SIZE - 1;	// Rx Bulk pointer
-		pAd->NextRxBulkInPosition = 0;
-		for (i = 0; i < (RX_RING_SIZE); i++)
-		{
-			PRX_CONTEXT  pRxContext = &(pAd->RxContext[i]);
-			NdisZeroMemory(pRxContext->TransferBuffer, MAX_RXBULK_SIZE);
-			/* peter : why don't we have to get BulkInLock first ? */
-			pRxContext->pAd	= pAd;
-			pRxContext->pIrp = NULL;
-            /* peter debug ++ */
-			pRxContext->BulkInOffset = 0;
-			pRxContext->bRxHandling = FALSE;
-            /* peter debug -- */
-			pRxContext->InUse		= FALSE;
-			pRxContext->IRPPending	= FALSE;
-			pRxContext->Readable	= FALSE;
-//			pRxContext->ReorderInUse = FALSE;
-//			pRxContext->ReadPosOffset = 0;
-		}
-
-/*=========================================================================*/
-/*      Reset Tx RING                                                      */
-/*=========================================================================*/
-		do
-		{
-			RTUSBCancelPendingBulkOutIRP(pAd);
-		} while (FALSE);
-
-/*=========================================================================*/
-		// Enable auto responder.
-		RTMP_IO_READ32(pAd, AUTO_RSP_CFG, &temp);
-		temp = temp | (0x01);
-		RTMP_IO_WRITE32(pAd, AUTO_RSP_CFG, temp);
-
-/*================================================*/
-		AsicEnableBssSync(pAd);
-
-		/* Soft reset BBP.*/
-		/* In 2870 chipset, ATE_BBP_IO_READ8_BY_REG_ID() == RTMP_BBP_IO_READ8_BY_REG_ID() */
-		/* Both rt2870ap and rt2870sta use BbpSoftReset(pAd) to do BBP soft reset */
-		BbpSoftReset(pAd);
-/*================================================*/
-		{
-#ifdef CONFIG_STA_SUPPORT
-			// Set all state machines back IDLE
-			pAd->Mlme.CntlMachine.CurrState    = CNTL_IDLE;
-			pAd->Mlme.AssocMachine.CurrState   = ASSOC_IDLE;
-			pAd->Mlme.AuthMachine.CurrState    = AUTH_REQ_IDLE;
-			pAd->Mlme.AuthRspMachine.CurrState = AUTH_RSP_IDLE;
-			pAd->Mlme.SyncMachine.CurrState    = SYNC_IDLE;
-			pAd->Mlme.ActMachine.CurrState    = ACT_IDLE;
-#endif // CONFIG_STA_SUPPORT //
-
-			//
-			// ===> refer to MlmeRestartStateMachine().
-			// When we entered ATE_START mode, PeriodicTimer was not cancelled.
-			// So we don't have to set it here.
-			//
-			//RTMPSetTimer(pAd, &pAd->Mlme.PeriodicTimer, MLME_TASK_EXEC_INTV);
-
-			ASSERT(pAd->CommonCfg.Channel != 0);
-
-			AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
-			AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-
-
-#ifdef CONFIG_STA_SUPPORT
-		    RTMPStationStart(pAd);
-#endif // CONFIG_STA_SUPPORT //
-		}
-//
-// These two steps have been done when entering ATE_STOP mode.
-//
-#if 0
-	    RTUSBWriteBBPRegister(pAd, BBP_R22, BbpData);
-	   	RTUSBWriteMACRegister(pAd, MAC_SYS_CTRL, MacData);
-#endif
-		// Clean ATE Bulk in/out counter and continue setup.
-		InterlockedExchange(&pAd->BulkOutRemained, 0);
-		NdisAcquireSpinLock(&pAd->GenericLock);
-		pAd->ContinBulkOut = FALSE;
-		pAd->ContinBulkIn = FALSE;
-		NdisReleaseSpinLock(&pAd->GenericLock);
-
-		/* Wait 50ms to prevent next URB to bulkout during HW reset. */
-		/* todo : remove this if not necessary */
-		NdisMSleep(50000);
-
-		pAd->ate.Mode = ATE_STOP;
-
-		// Enable Tx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value |= (1 << 2);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-/*=========================================================================*/
-		/* restore RX_FILTR_CFG */
-#ifdef CONFIG_STA_SUPPORT
-		/* restore RX_FILTR_CFG in order that QA maybe set it to 0x3 */
-		RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, STANORMAL);
-#endif // CONFIG_STA_SUPPORT //
-/*=========================================================================*/
-
-		// Enable Tx, RX DMA.
-		RtmpDmaEnable(pAd, 1);
-
-		// Enable Rx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value |= (1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// Wait 10ms to wait all of the bulk-in URBs to complete.
-		/* todo : remove this if not necessary */
-		NdisMSleep(10000);
-
-		// Everything is ready to start normal Tx/Rx.
-		RTUSBBulkReceive(pAd);
-		netif_start_queue(pAd->net_dev);
-
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("<=== ATE : ATESTOP \n"));
-	}
-	else if (!strcmp(arg, "TXCARR"))	// Tx Carrier
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: TXCARR\n"));
-		pAd->ate.Mode |= ATE_TXCARR;
-
-		// Disable Rx
-		// May be we need not to do this, because these have been done in ATE_START mode ???
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// QA has done the following steps if it is used.
-		if (pAd->ate.bQATxStart == FALSE)
-		{
-			// Soft reset BBP.
-			BbpSoftReset(pAd);
-
-			// Carrier Test set BBP R22 bit7=1, bit6=1, bit[5~0]=0x01
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-			BbpData &= 0xFFFFFF00; //clear bit7, bit6, bit[5~0]
-			BbpData |= 0x000000C1; //set bit7=1, bit6=1, bit[5~0]=0x01
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-
-			// set MAC_SYS_CTRL(0x1004) Continuous Tx Production Test (bit4) = 1
-			RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-			Value = Value | 0x00000010;
-			RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-		}
-	}
-	else if (!strcmp(arg, "TXCONT"))	// Tx Continue
-	{
-		if (pAd->ate.bQATxStart == TRUE)
-		{
-			/* set MAC_SYS_CTRL(0x1004) bit4(Continuous Tx Production Test)
-			   and bit2(MAC TX enable) back to zero. */
-			RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
-			MacData &= 0xFFFFFFEB;
-			RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
-
-			// set BBP R22 bit7=0
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-			BbpData &= 0xFFFFFF7F; //set bit7=0
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-		}
-
-		/* for TxCont mode.
-		** Step 1: Send 50 packets first then wait for a moment.
-		** Step 2: Send more 50 packet then start continue mode.
-		*/
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: TXCONT\n"));
-		// Step 1: send 50 packets first.
-		pAd->ate.Mode |= ATE_TXCONT;
-		pAd->ate.TxCount = 50;
-		pAd->ate.TxDoneCount = 0;
-
-		// Soft reset BBP.
-		BbpSoftReset(pAd);
-
-		// Abort Tx, RX DMA.
-		RtmpDmaEnable(pAd, 0);
-
-
-		/* Only needed if we have to send some normal frames. */
-		SetJapanFilter(pAd);
-
-		// Setup frame format.
-		ATESetUpFrame(pAd, 0);
-
-		// Enable Tx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value |= (1 << 2);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// Disable Rx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// Start Tx, RX DMA.
-		RtmpDmaEnable(pAd, 1);
-
-		InterlockedExchange(&pAd->BulkOutRemained, pAd->ate.TxCount);
-
-#ifdef	RALINK_28xx_QA
-		if (pAd->ate.bQATxStart == TRUE)
-		{
-			pAd->ate.TxStatus = 1;
-			//pAd->ate.Repeat = 0;
-		}
-#endif	// RALINK_28xx_QA //
-
-		NdisAcquireSpinLock(&pAd->GenericLock);//0820
-		pAd->ContinBulkOut = FALSE;
-		NdisReleaseSpinLock(&pAd->GenericLock);
-
-		RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE);
-
-		// Kick bulk out
-		RTUSBKickBulkOut(pAd);
-
-		/* To make sure all the 50 frames have been bulk out before executing step 2 */
-		while (atomic_read(&pAd->BulkOutRemained) > 0)
-		{
-			RTMPusecDelay(5000);
-		}
-
-		// Step 2: send more 50 packets then start continue mode.
-		// Abort Tx, RX DMA.
-		RtmpDmaEnable(pAd, 0);
-
-		// Cont. TX set BBP R22 bit7=1
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-		BbpData |= 0x00000080; //set bit7=1
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-
-		pAd->ate.TxCount = 50;
-		pAd->ate.TxDoneCount = 0;
-
-		SetJapanFilter(pAd);
-
-		// Setup frame format.
-		ATESetUpFrame(pAd, 0);
-
-		// Enable Tx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value |= (1 << 2);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// Disable Rx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 3);
-
-		// Start Tx, RX DMA.
-		RtmpDmaEnable(pAd, 1);
-
-		InterlockedExchange(&pAd->BulkOutRemained, pAd->ate.TxCount);
-
-#ifdef	RALINK_28xx_QA
-		if (pAd->ate.bQATxStart == TRUE)
-		{
-			pAd->ate.TxStatus = 1;
-			//pAd->ate.Repeat = 0;
-		}
-#endif	// RALINK_28xx_QA //
-
-		NdisAcquireSpinLock(&pAd->GenericLock);//0820
-		pAd->ContinBulkOut = FALSE;
-		NdisReleaseSpinLock(&pAd->GenericLock);
-
-		RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE);
-		// Kick bulk out
-		RTUSBKickBulkOut(pAd);
-
-#if 1
-		RTMPusecDelay(500);
-#else
-		while (atomic_read(&pAd->BulkOutRemained) > 0)
-		{
-			RTMPusecDelay(5000);
-		}
-#endif // 1 //
-
-		// Set MAC_SYS_CTRL(0x1004) Continuous Tx Production Test (bit4) = 1.
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
-		MacData |= 0x00000010;
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
-	}
-	else if (!strcmp(arg, "TXFRAME"))	// Tx Frames
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: TXFRAME(Count=0x%08x)\n", pAd->ate.TxCount));
-		pAd->ate.Mode |= ATE_TXFRAME;
-
-		// Soft reset BBP.
-		BbpSoftReset(pAd);
-
-		// Default value in BBP R22 is 0x0.
-		BbpData = 0;
-
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
-
-		// Clean bit4 to stop continuous Tx production test.
-		MacData &= 0xFFFFFFEF;
-
-	   	ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
-
-#ifdef RALINK_28xx_QA
-		// add this for LoopBack mode
-		if (pAd->ate.bQARxStart == FALSE)
-		{
-			// Disable Rx
-			RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-			Value &= ~(1 << 3);
-			RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-		}
-
-		if (pAd->ate.bQATxStart == TRUE)
-		{
-			pAd->ate.TxStatus = 1;
-			//pAd->ate.Repeat = 0;
-		}
-#else
-		// Disable Rx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-#endif // RALINK_28xx_QA //
-
-		// Enable Tx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value |= (1 << 2);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-        SetJapanFilter(pAd);
-
-		// Abort Tx, RX DMA.
-		RtmpDmaEnable(pAd, 0);
-
-		pAd->ate.TxDoneCount = 0;
-
-        // Setup frame format
-		ATESetUpFrame(pAd, 0);
-
-		// Start Tx, RX DMA.
-		RtmpDmaEnable(pAd, 1);
-
-		// Check count is continuous or not yet.
-		//
-		// Due to the type mismatch between "pAd->BulkOutRemained"(atomic_t) and "pAd->ate.TxCount"(UINT32)
-		//
-		if (pAd->ate.TxCount == 0)
-		{
-			InterlockedExchange(&pAd->BulkOutRemained, 0);
-		}
-		else
-		{
-			InterlockedExchange(&pAd->BulkOutRemained, pAd->ate.TxCount);
-		}
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("bulk out count = %d\n", atomic_read(&pAd->BulkOutRemained)));
-		ASSERT((atomic_read(&pAd->BulkOutRemained) >= 0));
-
-		if (atomic_read(&pAd->BulkOutRemained) == 0)
-		{
-			ATEDBGPRINT(RT_DEBUG_TRACE, ("Send packet countinuously\n"));
-
-			/* In 28xx, NdisAcquireSpinLock() == spin_lock_bh() */
-			/* NdisAcquireSpinLock only need one argument in 28xx. */
-			NdisAcquireSpinLock(&pAd->GenericLock);
-			pAd->ContinBulkOut = TRUE;
-			NdisReleaseSpinLock(&pAd->GenericLock);
-
-			/* In 28xx, BULK_OUT_LOCK() == spin_lock_irqsave() */
-			BULK_OUT_LOCK(&pAd->BulkOutLock[0], IrqFlags);// peter : NdisAcquireSpinLock ==> BULK_OUT_LOCK
-			pAd->BulkOutPending[0] = FALSE;
-			BULK_OUT_UNLOCK(&pAd->BulkOutLock[0], IrqFlags);// peter : NdisAcquireSpinLock ==> BULK_OUT_LOCK
-		}
-		else
-		{
-			ATEDBGPRINT(RT_DEBUG_TRACE, ("Send packets depend on counter\n"));
-
-			NdisAcquireSpinLock(&pAd->GenericLock);
-			pAd->ContinBulkOut = FALSE;
-			NdisReleaseSpinLock(&pAd->GenericLock);
-
-			BULK_OUT_LOCK(&pAd->BulkOutLock[0], IrqFlags);
-			pAd->BulkOutPending[0] = FALSE;
-			BULK_OUT_UNLOCK(&pAd->BulkOutLock[0], IrqFlags);
-		}
-
-		RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE);
-
-		// Kick bulk out
-		RTUSBKickBulkOut(pAd);
-	}
-#ifdef RALINK_28xx_QA
-	else if (!strcmp(arg, "TXSTOP")) 		//Enter ATE mode and set Tx/Rx Idle
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: TXSTOP\n"));
-
-		atemode = pAd->ate.Mode;
-		pAd->ate.Mode &= ATE_TXSTOP;
-		pAd->ate.bQATxStart = FALSE;
-//		pAd->ate.TxDoneCount = pAd->ate.TxCount;
-
-/*=========================================================================*/
-		if (atemode & ATE_TXCARR)
-		{
-			// No Carrier Test set BBP R22 bit7=0, bit6=0, bit[5~0]=0x0
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-			BbpData &= 0xFFFFFF00; //clear bit7, bit6, bit[5~0]
-		    ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-		}
-		else if (atemode & ATE_TXCARRSUPP)
-		{
-			// No Cont. TX set BBP R22 bit7=0
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-			BbpData &= ~(1 << 7); //set bit7=0
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-
-			// No Carrier Suppression set BBP R24 bit0=0
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R24, &BbpData);
-			BbpData &= 0xFFFFFFFE; //clear bit0
-		    ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, BbpData);
-		}
-		else if ((atemode & ATE_TXFRAME) || (atemode == ATE_STOP))
-		{
-			if (atemode & ATE_TXCONT)
-			{
-				// No Cont. TX set BBP R22 bit7=0
-				ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-				BbpData &= ~(1 << 7); //set bit7=0
-				ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-			}
-		}
-
-/*=========================================================================*/
-		RTUSBRejectPendingPackets(pAd);
-		RTUSBCleanUpDataBulkOutQueue(pAd);
-
-		/* not used in RT28xx */
-		//RTUSBCleanUpMLMEWaitQueue(pAd);
-		/* empty function so far */
-		RTUSBCleanUpMLMEBulkOutQueue(pAd);
-/*=========================================================================*/
-		// Abort Tx, RX DMA.
-		RtmpDmaEnable(pAd, 0);
-/*=========================================================================*/
-
-		/* In 28xx, pAd->PendingRx is not of type atomic_t anymore */
-//		while ((atomic_read(&pAd->PendingRx) > 0))	//pAd->BulkFlags != 0 wait bulk out finish
-		/* peter todo : BulkInLock */
-		while (pAd->PendingRx > 0)
-		{
-#if 1
-			ATE_RTUSBCancelPendingBulkInIRP(pAd);
-#else
-//			NdisInterlockedDecrement(&pAd->PendingRx);
-			pAd->PendingRx--;
-#endif
-			RTMPusecDelay(500000);
-		}
-
-		while (((pAd->BulkOutPending[0] == TRUE) ||
-				(pAd->BulkOutPending[1] == TRUE) ||
-				(pAd->BulkOutPending[2] == TRUE) ||
-				(pAd->BulkOutPending[3] == TRUE)) && (pAd->BulkFlags != 0))	//pAd->BulkFlags != 0 wait bulk out finish
-		{
-			do
-			{
-				RTUSBCancelPendingBulkOutIRP(pAd);
-			} while (FALSE);
-
-			RTMPusecDelay(500000);
-		}
-
-		ASSERT(pAd->PendingRx == 0);
-/*=========================================================================*/
-		// Enable Tx, Rx DMA.
-		RtmpDmaEnable(pAd, 1);
-
-		/* task Tx status : 0 --> task is idle, 1 --> task is running */
-		pAd->ate.TxStatus = 0;
-
-		// Soft reset BBP.
-		BbpSoftReset(pAd);
-
-		// Disable Tx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
-		MacData &= (0xfffffffb);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
-
-		//Clean ATE Bulk in/out counter and continue setup
-		InterlockedExchange(&pAd->BulkOutRemained, 0);
-
-		pAd->ContinBulkOut = FALSE;
-	}
-	else if (!strcmp(arg, "RXSTOP"))
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: RXSTOP\n"));
-		atemode = pAd->ate.Mode;
-
-		// Disable Rx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		pAd->ate.Mode &= ATE_RXSTOP;
-		pAd->ate.bQARxStart = FALSE;
-//		pAd->ate.TxDoneCount = pAd->ate.TxCount;
-
-/*=========================================================================*/
-		RTUSBRejectPendingPackets(pAd);
-		RTUSBCleanUpDataBulkOutQueue(pAd);
-
-		/* not used in RT28xx */
-		//RTUSBCleanUpMLMEWaitQueue(pAd);
-		RTUSBCleanUpMLMEBulkOutQueue(pAd);
-/*=========================================================================*/
-
-		// Abort Tx, RX DMA.
-		RtmpDmaEnable(pAd, 0);
-/*=========================================================================*/
-//		while ((atomic_read(&pAd->PendingRx) > 0))
-		while (pAd->PendingRx > 0)
-		{
-#if 1
-			ATE_RTUSBCancelPendingBulkInIRP(pAd);
-#else
-//			NdisInterlockedDecrement(&pAd->PendingRx);
-			pAd->PendingRx--;
-#endif
-			RTMPusecDelay(500000);
-		}
-
-		while (((pAd->BulkOutPending[0] == TRUE) ||
-				(pAd->BulkOutPending[1] == TRUE) ||
-				(pAd->BulkOutPending[2] == TRUE) ||
-				(pAd->BulkOutPending[3] == TRUE)) && (pAd->BulkFlags != 0))	//pAd->BulkFlags != 0 wait bulk out finish
-		{
-			do
-			{
-				RTUSBCancelPendingBulkOutIRP(pAd);
-			} while (FALSE);
-
-			RTMPusecDelay(500000);
-		}
-
-		ASSERT(pAd->PendingRx == 0);
-/*=========================================================================*/
-
-		// Soft reset BBP.
-		BbpSoftReset(pAd);
-		pAd->ContinBulkIn = FALSE;
-	}
-#endif // RALINK_28xx_QA //
-	else if (!strcmp(arg, "RXFRAME")) // Rx Frames
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: RXFRAME\n"));
-
-		// Disable Rx of MAC block
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// Default value in BBP R22 is 0x0.
-		BbpData = 0;
-
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
-		// Clean bit4 to stop continuous Tx production test.
-		MacData &= 0xFFFFFFEF;
-
-	   	ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
-
-		pAd->ate.Mode |= ATE_RXFRAME;
-
-		// Abort Tx, RX DMA.
-		RtmpDmaEnable(pAd, 0);
-
-		// Disable TX of MAC block
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 2);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-        // Reset Rx RING.
-		for ( i = 0; i < (RX_RING_SIZE); i++)
-		{
-			PRX_CONTEXT  pRxContext = &(pAd->RxContext[i]);
-
-			pRxContext->InUse = FALSE;
-			pRxContext->IRPPending = FALSE;
-			pRxContext->Readable = FALSE;
-
-			//
-			// Get the urb from kernel back to driver.
-			//
-			RTUSB_UNLINK_URB(pRxContext->pUrb);
-
-			/* Sleep 200 microsecs to give cancellation time to work. */
-			NdisMSleep(200);
-			pAd->BulkInReq = 0;
-
-//			InterlockedExchange(&pAd->PendingRx, 0);
-			pAd->PendingRx = 0;
-			pAd->NextRxBulkInReadIndex = 0;	// Next Rx Read index
-			pAd->NextRxBulkInIndex		= RX_RING_SIZE - 1;	// Rx Bulk pointer
-			pAd->NextRxBulkInPosition = 0;
-		}
-
-		// read to clear counters
-		RTUSBReadMACRegister(pAd, RX_STA_CNT0, &temp); //RX PHY & RX CRC count
-		RTUSBReadMACRegister(pAd, RX_STA_CNT1, &temp); //RX PLCP error count & CCA false alarm count
-		RTUSBReadMACRegister(pAd, RX_STA_CNT2, &temp); //RX FIFO overflow frame count & RX duplicated filtered frame count
-
-		pAd->ContinBulkIn = TRUE;
-
-		// Enable Tx, RX DMA.
-		RtmpDmaEnable(pAd, 1);
-
-		// Enable RX of MAC block
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value |= (1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// Kick bulk in
-		RTUSBBulkReceive(pAd);
-	}
-	else
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: Invalid arg!\n"));
-		return FALSE;
-	}
-	RTMPusecDelay(5000);
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("<=== ATECmdHandler()\n"));
-
-	return TRUE;
-}
-#endif // RT2870 //
-
-INT	Set_ATE_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	if (ATECmdHandler(pAd, arg))
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_Proc Success\n"));
-
-
-		return TRUE;
-	}
-	else
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_Proc Failed\n"));
-		return FALSE;
-	}
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE ADDR1=DA for TxFrame(AP  : To DS = 0 ; From DS = 1)
-        or
-        Set ATE ADDR3=DA for TxFrame(STA : To DS = 1 ; From DS = 0)
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_DA_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR				*value;
-	INT					i;
-
-	if(strlen(arg) != 17)  //Mac address acceptable format 01:02:03:04:05:06 length 17
-		return FALSE;
-
-    for (i=0, value = rstrtok(arg, ":"); value; value = rstrtok(NULL, ":"))
-	{
-		if((strlen(value) != 2) || (!isxdigit(*value)) || (!isxdigit(*(value+1))) )
-			return FALSE;  //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
-		AtoH(value, &pAd->ate.Addr3[i++], 1);
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-	if(i != 6)
-		return FALSE;  //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_DA_Proc (DA = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAd->ate.Addr3[0],
-		pAd->ate.Addr3[1], pAd->ate.Addr3[2], pAd->ate.Addr3[3], pAd->ate.Addr3[4], pAd->ate.Addr3[5]));
-#endif // CONFIG_STA_SUPPORT //
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_DA_Proc Success\n"));
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE ADDR3=SA for TxFrame(AP  : To DS = 0 ; From DS = 1)
-        or
-        Set ATE ADDR2=SA for TxFrame(STA : To DS = 1 ; From DS = 0)
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_SA_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR				*value;
-	INT					i;
-
-	if(strlen(arg) != 17)  //Mac address acceptable format 01:02:03:04:05:06 length 17
-		return FALSE;
-
-    for (i=0, value = rstrtok(arg, ":"); value; value = rstrtok(NULL, ":"))
-	{
-		if((strlen(value) != 2) || (!isxdigit(*value)) || (!isxdigit(*(value+1))) )
-			return FALSE;  //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
-		AtoH(value, &pAd->ate.Addr2[i++], 1);
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-	if(i != 6)
-		return FALSE;  //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_SA_Proc (SA = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAd->ate.Addr2[0],
-		pAd->ate.Addr2[1], pAd->ate.Addr2[2], pAd->ate.Addr2[3], pAd->ate.Addr2[4], pAd->ate.Addr2[5]));
-#endif // CONFIG_STA_SUPPORT //
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_SA_Proc Success\n"));
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE ADDR2=BSSID for TxFrame(AP  : To DS = 0 ; From DS = 1)
-        or
-        Set ATE ADDR1=BSSID for TxFrame(STA : To DS = 1 ; From DS = 0)
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_BSSID_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR				*value;
-	INT					i;
-
-	if(strlen(arg) != 17)  //Mac address acceptable format 01:02:03:04:05:06 length 17
-		return FALSE;
-
-    for (i=0, value = rstrtok(arg, ":"); value; value = rstrtok(NULL, ":"))
-	{
-		if((strlen(value) != 2) || (!isxdigit(*value)) || (!isxdigit(*(value+1))) )
-			return FALSE;  //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
-		AtoH(value, &pAd->ate.Addr1[i++], 1);
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-	if(i != 6)
-		return FALSE;  //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_BSSID_Proc (BSSID = %2X:%2X:%2X:%2X:%2X:%2X)\n",	pAd->ate.Addr1[0],
-		pAd->ate.Addr1[1], pAd->ate.Addr1[2], pAd->ate.Addr1[3], pAd->ate.Addr1[4], pAd->ate.Addr1[5]));
-#endif // CONFIG_STA_SUPPORT //
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_BSSID_Proc Success\n"));
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx Channel
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_CHANNEL_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UCHAR channel;
-
-	channel = simple_strtol(arg, 0, 10);
-
-	if ((channel < 1) || (channel > 216))// to allow A band channel : ((channel < 1) || (channel > 14))
-	{
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_CHANNEL_Proc::Out of range, it should be in range of 1~14.\n"));
-		return FALSE;
-	}
-	pAd->ate.Channel = channel;
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_CHANNEL_Proc (ATE Channel = %d)\n", pAd->ate.Channel));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_CHANNEL_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx Power0
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_POWER0_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR TxPower;
-
-	TxPower = simple_strtol(arg, 0, 10);
-
-	if (pAd->ate.Channel <= 14)
-	{
-		if ((TxPower > 31) || (TxPower < 0))
-		{
-			ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_POWER0_Proc::Out of range (Value=%d)\n", TxPower));
-			return FALSE;
-		}
-	}
-	else// 5.5GHz
-	{
-		if ((TxPower > 15) || (TxPower < -7))
-		{
-			ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_POWER0_Proc::Out of range (Value=%d)\n", TxPower));
-			return FALSE;
-		}
-	}
-
-	pAd->ate.TxPower0 = TxPower;
-	ATETxPwrHandler(pAd, 0);
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_POWER0_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx Power1
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_POWER1_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR TxPower;
-
-	TxPower = simple_strtol(arg, 0, 10);
-
-	if (pAd->ate.Channel <= 14)
-	{
-	if ((TxPower > 31) || (TxPower < 0))
-	{
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_POWER1_Proc::Out of range (Value=%d)\n", TxPower));
-		return FALSE;
-	}
-	}
-	else
-	{
-		if ((TxPower > 15) || (TxPower < -7))
-		{
-			ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_POWER1_Proc::Out of range (Value=%d)\n", TxPower));
-			return FALSE;
-		}
-	}
-
-	pAd->ate.TxPower1 = TxPower;
-	ATETxPwrHandler(pAd, 1);
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_POWER1_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx Antenna
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_Antenna_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR value;
-
-	value = simple_strtol(arg, 0, 10);
-
-	if ((value > 2) || (value < 0))
-	{
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_Antenna_Proc::Out of range (Value=%d)\n", value));
-		return FALSE;
-	}
-
-	pAd->ate.TxAntennaSel = value;
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_Antenna_Proc (Antenna = %d)\n", pAd->ate.TxAntennaSel));
-	ATEDBGPRINT(RT_DEBUG_TRACE,("Ralink: Set_ATE_TX_Antenna_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Rx Antenna
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_RX_Antenna_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR value;
-
-	value = simple_strtol(arg, 0, 10);
-
-	if ((value > 3) || (value < 0))
-	{
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_RX_Antenna_Proc::Out of range (Value=%d)\n", value));
-		return FALSE;
-	}
-
-	pAd->ate.RxAntennaSel = value;
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_RX_Antenna_Proc (Antenna = %d)\n", pAd->ate.RxAntennaSel));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_RX_Antenna_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE RF frequence offset
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_FREQOFFSET_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UCHAR RFFreqOffset;
-	ULONG R4;
-
-	RFFreqOffset = simple_strtol(arg, 0, 10);
-
-	if(RFFreqOffset >= 64)
-	{
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_FREQOFFSET_Proc::Out of range, it should be in range of 0~63.\n"));
-		return FALSE;
-	}
-
-	pAd->ate.RFFreqOffset = RFFreqOffset;
-	R4 = pAd->ate.RFFreqOffset << 15;		// shift TX power control to correct RF register bit position
-	R4 |= (pAd->LatchRfRegs.R4 & ((~0x001f8000)));
-	pAd->LatchRfRegs.R4 = R4;
-
-	RtmpRfIoWrite(pAd);
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_FREQOFFSET_Proc (RFFreqOffset = %d)\n", pAd->ate.RFFreqOffset));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_FREQOFFSET_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE RF BW
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_BW_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	int i;
-	UCHAR value = 0;
-	UCHAR BBPCurrentBW;
-
-	BBPCurrentBW = simple_strtol(arg, 0, 10);
-
-	if(BBPCurrentBW == 0)
-		pAd->ate.TxWI.BW = BW_20;
-	else
-		pAd->ate.TxWI.BW = BW_40;
-
-	if(pAd->ate.TxWI.BW == BW_20)
-	{
-		if(pAd->ate.Channel <= 14)
-		{
- 		for (i=0; i<5; i++)
- 		{
-				if (pAd->Tx20MPwrCfgGBand[i] != 0xffffffff)
-				{
-					RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, pAd->Tx20MPwrCfgGBand[i]);
-					RTMPusecDelay(5000);
-				}
-			}
-		}
-		else
-		{
-			for (i=0; i<5; i++)
-			{
-				if (pAd->Tx20MPwrCfgABand[i] != 0xffffffff)
- 			{
-					RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, pAd->Tx20MPwrCfgABand[i]);
- 				RTMPusecDelay(5000);
- 			}
- 		}
-		}
-
-		//Set BBP R4 bit[4:3]=0:0
- 		ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &value);
- 		value &= (~0x18);
- 		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, value);
-
-  		//Set BBP R66=0x3C
- 		value = 0x3C;
- 		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, value);
-		//Set BBP R68=0x0B
-		//to improve Rx sensitivity.
-		value = 0x0B;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R68, value);
-		//Set BBP R69=0x16
-		value = 0x16;
- 		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, value);
-		//Set BBP R70=0x08
-		value = 0x08;
- 		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, value);
-		//Set BBP R73=0x11
-		value = 0x11;
- 		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, value);
-
-	    // If Channel=14, Bandwidth=20M and Mode=CCK, Set BBP R4 bit5=1
-	    // (Japan filter coefficients)
-	    // This segment of code will only works when ATETXMODE and ATECHANNEL
-	    // were set to MODE_CCK and 14 respectively before ATETXBW is set to 0.
-	    //=====================================================================
-		if (pAd->ate.Channel == 14)
-		{
-			int TxMode = pAd->ate.TxWI.PHYMODE;
-			if (TxMode == MODE_CCK)
-			{
-				// when Channel==14 && Mode==CCK && BandWidth==20M, BBP R4 bit5=1
- 				ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &value);
-				value |= 0x20; //set bit5=1
- 				ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, value);
-			}
-		}
-
-	    //=====================================================================
-		// If bandwidth != 40M, RF Reg4 bit 21 = 0.
-		pAd->LatchRfRegs.R4 &= ~0x00200000;
-		RtmpRfIoWrite(pAd);
-	}
-	else if(pAd->ate.TxWI.BW == BW_40)
-	{
-		if(pAd->ate.Channel <= 14)
-		{
-			for (i=0; i<5; i++)
-			{
-				if (pAd->Tx40MPwrCfgGBand[i] != 0xffffffff)
-				{
-					RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, pAd->Tx40MPwrCfgGBand[i]);
-					RTMPusecDelay(5000);
-				}
-			}
-		}
-		else
-		{
-			for (i=0; i<5; i++)
-			{
-				if (pAd->Tx40MPwrCfgABand[i] != 0xffffffff)
-				{
-					RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, pAd->Tx40MPwrCfgABand[i]);
-					RTMPusecDelay(5000);
-				}
-			}
-#ifdef DOT11_N_SUPPORT
-			if ((pAd->ate.TxWI.PHYMODE >= MODE_HTMIX) && (pAd->ate.TxWI.MCS == 7))
-			{
-    			value = 0x28;
-    			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R67, value);
-			}
-#endif // DOT11_N_SUPPORT //
-		}
-
-		//Set BBP R4 bit[4:3]=1:0
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &value);
-		value &= (~0x18);
-		value |= 0x10;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, value);
-
-		//Set BBP R66=0x3C
-		value = 0x3C;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, value);
-		//Set BBP R68=0x0C
-		//to improve Rx sensitivity.
-		value = 0x0C;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R68, value);
-		//Set BBP R69=0x1A
-		value = 0x1A;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, value);
-		//Set BBP R70=0x0A
-		value = 0x0A;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, value);
-		//Set BBP R73=0x16
-		value = 0x16;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, value);
-
-		// If bandwidth = 40M, set RF Reg4 bit 21 = 1.
-		pAd->LatchRfRegs.R4 |= 0x00200000;
-		RtmpRfIoWrite(pAd);
-	}
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_BW_Proc (BBPCurrentBW = %d)\n", pAd->ate.TxWI.BW));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_BW_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx frame length
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_LENGTH_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	pAd->ate.TxLength = simple_strtol(arg, 0, 10);
-
-	if((pAd->ate.TxLength < 24) || (pAd->ate.TxLength > (MAX_FRAME_SIZE - 34/* == 2312 */)))
-	{
-		pAd->ate.TxLength = (MAX_FRAME_SIZE - 34/* == 2312 */);
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_LENGTH_Proc::Out of range, it should be in range of 24~%d.\n", (MAX_FRAME_SIZE - 34/* == 2312 */)));
-		return FALSE;
-	}
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_LENGTH_Proc (TxLength = %d)\n", pAd->ate.TxLength));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_LENGTH_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx frame count
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_COUNT_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	pAd->ate.TxCount = simple_strtol(arg, 0, 10);
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_COUNT_Proc (TxCount = %d)\n", pAd->ate.TxCount));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_COUNT_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx frame MCS
-
-        Return:
-        	TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_MCS_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UCHAR MCS;
-	int result;
-
-	MCS = simple_strtol(arg, 0, 10);
-	result = CheckMCSValid(pAd->ate.TxWI.PHYMODE, MCS);
-
-	if (result != -1)
-	{
-		pAd->ate.TxWI.MCS = (UCHAR)MCS;
-	}
-	else
-	{
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_MCS_Proc::Out of range, refer to rate table.\n"));
-		return FALSE;
-	}
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_MCS_Proc (MCS = %d)\n", pAd->ate.TxWI.MCS));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_MCS_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx frame Mode
-        0: MODE_CCK
-        1: MODE_OFDM
-        2: MODE_HTMIX
-        3: MODE_HTGREENFIELD
-
-        Return:
-        	TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_MODE_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	pAd->ate.TxWI.PHYMODE = simple_strtol(arg, 0, 10);
-
-	if(pAd->ate.TxWI.PHYMODE > 3)
-	{
-		pAd->ate.TxWI.PHYMODE = 0;
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_MODE_Proc::Out of range. it should be in range of 0~3\n"));
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("0: CCK, 1: OFDM, 2: HT_MIX, 3: HT_GREEN_FIELD.\n"));
-		return FALSE;
-	}
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_MODE_Proc (TxMode = %d)\n", pAd->ate.TxWI.PHYMODE));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_MODE_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx frame GI
-
-        Return:
-        	TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_GI_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	pAd->ate.TxWI.ShortGI = simple_strtol(arg, 0, 10);
-
-	if(pAd->ate.TxWI.ShortGI > 1)
-	{
-		pAd->ate.TxWI.ShortGI = 0;
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_GI_Proc::Out of range\n"));
-		return FALSE;
-	}
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_GI_Proc (GI = %d)\n", pAd->ate.TxWI.ShortGI));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_GI_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-    ==========================================================================
- */
-INT	Set_ATE_RX_FER_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	pAd->ate.bRxFer = simple_strtol(arg, 0, 10);
-
-	if (pAd->ate.bRxFer == 1)
-	{
-		pAd->ate.RxCntPerSec = 0;
-		pAd->ate.RxTotalCnt = 0;
-	}
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_RX_FER_Proc (bRxFer = %d)\n", pAd->ate.bRxFer));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_RX_FER_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-INT Set_ATE_Read_RF_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ate_print(KERN_EMERG "R1 = %lx\n", pAd->LatchRfRegs.R1);
-	ate_print(KERN_EMERG "R2 = %lx\n", pAd->LatchRfRegs.R2);
-	ate_print(KERN_EMERG "R3 = %lx\n", pAd->LatchRfRegs.R3);
-	ate_print(KERN_EMERG "R4 = %lx\n", pAd->LatchRfRegs.R4);
-
-	return TRUE;
-}
-
-INT Set_ATE_Write_RF1_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UINT32 value = simple_strtol(arg, 0, 16);
-
-	pAd->LatchRfRegs.R1 = value;
-	RtmpRfIoWrite(pAd);
-
-	return TRUE;
-}
-
-INT Set_ATE_Write_RF2_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UINT32 value = simple_strtol(arg, 0, 16);
-
-	pAd->LatchRfRegs.R2 = value;
-	RtmpRfIoWrite(pAd);
-
-	return TRUE;
-}
-
-INT Set_ATE_Write_RF3_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UINT32 value = simple_strtol(arg, 0, 16);
-
-	pAd->LatchRfRegs.R3 = value;
-	RtmpRfIoWrite(pAd);
-
-	return TRUE;
-}
-
-INT Set_ATE_Write_RF4_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UINT32 value = simple_strtol(arg, 0, 16);
-
-	pAd->LatchRfRegs.R4 = value;
-	RtmpRfIoWrite(pAd);
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Load and Write EEPROM from a binary file prepared in advance.
-
-        Return:
-        	TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-#ifndef UCOS
-INT Set_ATE_Load_E2P_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	BOOLEAN		    ret = FALSE;
-	PUCHAR			src = EEPROM_BIN_FILE_NAME;
-	struct file		*srcf;
-	INT32 			retval, orgfsuid, orgfsgid;
-   	mm_segment_t	orgfs;
-	USHORT 			WriteEEPROM[(EEPROM_SIZE/2)];
-	UINT32			FileLength = 0;
-	UINT32 			value = simple_strtol(arg, 0, 10);
-
-	ATEDBGPRINT(RT_DEBUG_ERROR, ("===> %s (value=%d)\n\n", __func__, value));
-
-	if (value > 0)
-	{
-		/* zero the e2p buffer */
-		NdisZeroMemory((PUCHAR)WriteEEPROM, EEPROM_SIZE);
-
-		/* save uid and gid used for filesystem access.
-	    ** set user and group to 0 (root)
-	    */
-		orgfsuid = current->fsuid;
-		orgfsgid = current->fsgid;
-		/* as root */
-		current->fsuid = current->fsgid = 0;
-    	orgfs = get_fs();
-    	set_fs(KERNEL_DS);
-
-		do
-		{
-			/* open the bin file */
-			srcf = filp_open(src, O_RDONLY, 0);
-
-			if (IS_ERR(srcf))
-			{
-				ate_print("%s - Error %ld opening %s\n", __func__, -PTR_ERR(srcf), src);
-				break;
-			}
-
-			/* the object must have a read method */
-			if ((srcf->f_op == NULL) || (srcf->f_op->read == NULL))
-			{
-				ate_print("%s - %s does not have a read method\n", __func__, src);
-				break;
-			}
-
-			/* read the firmware from the file *.bin */
-			FileLength = srcf->f_op->read(srcf,
-										  (PUCHAR)WriteEEPROM,
-										  EEPROM_SIZE,
-										  &srcf->f_pos);
-
-			if (FileLength != EEPROM_SIZE)
-			{
-				ate_print("%s: error file length (=%d) in e2p.bin\n",
-					   __func__, FileLength);
-				break;
-			}
-			else
-			{
-				/* write the content of .bin file to EEPROM */
-				rt_ee_write_all(pAd, WriteEEPROM);
-				ret = TRUE;
-			}
-			break;
-		} while(TRUE);
-
-		/* close firmware file */
-		if (IS_ERR(srcf))
-		{
-				;
-		}
-		else
-		{
-			retval = filp_close(srcf, NULL);
-			if (retval)
-			{
-				ATEDBGPRINT(RT_DEBUG_ERROR, ("--> Error %d closing %s\n", -retval, src));
-
-			}
-		}
-
-		/* restore */
-		set_fs(orgfs);
-		current->fsuid = orgfsuid;
-		current->fsgid = orgfsgid;
-	}
-    ATEDBGPRINT(RT_DEBUG_ERROR, ("<=== %s (ret=%d)\n", __func__, ret));
-
-    return ret;
-
-}
-#else
-INT Set_ATE_Load_E2P_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	USHORT 			WriteEEPROM[(EEPROM_SIZE/2)];
-	struct iwreq	*wrq = (struct iwreq *)arg;
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("===> %s (wrq->u.data.length = %d)\n\n", __func__, wrq->u.data.length));
-
-	if (wrq->u.data.length != EEPROM_SIZE)
-	{
-		ate_print("%s: error length (=%d) from host\n",
-			   __func__, wrq->u.data.length);
-		return FALSE;
-	}
-	else/* (wrq->u.data.length == EEPROM_SIZE) */
-	{
-		/* zero the e2p buffer */
-		NdisZeroMemory((PUCHAR)WriteEEPROM, EEPROM_SIZE);
-
-		/* fill the local buffer */
-		NdisMoveMemory((PUCHAR)WriteEEPROM, wrq->u.data.pointer, wrq->u.data.length);
-
-		do
-		{
-				/* write the content of .bin file to EEPROM */
-				rt_ee_write_all(pAd, WriteEEPROM);
-
-		} while(FALSE);
-		}
-
-    ATEDBGPRINT(RT_DEBUG_TRACE, ("<=== %s\n", __func__));
-
-    return TRUE;
-
-}
-#endif // !UCOS //
-
-INT Set_ATE_Read_E2P_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	USHORT buffer[EEPROM_SIZE/2];
-	USHORT *p;
-	int i;
-
-	rt_ee_read_all(pAd, (USHORT *)buffer);
-	p = buffer;
-	for (i = 0; i < (EEPROM_SIZE/2); i++)
-	{
-		ate_print("%4.4x ", *p);
-		if (((i+1) % 16) == 0)
-			ate_print("\n");
-		p++;
-	}
-	return TRUE;
-}
-
-INT	Set_ATE_Show_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ate_print("Mode=%d\n", pAd->ate.Mode);
-	ate_print("TxPower0=%d\n", pAd->ate.TxPower0);
-	ate_print("TxPower1=%d\n", pAd->ate.TxPower1);
-	ate_print("TxAntennaSel=%d\n", pAd->ate.TxAntennaSel);
-	ate_print("RxAntennaSel=%d\n", pAd->ate.RxAntennaSel);
-	ate_print("BBPCurrentBW=%d\n", pAd->ate.TxWI.BW);
-	ate_print("GI=%d\n", pAd->ate.TxWI.ShortGI);
-	ate_print("MCS=%d\n", pAd->ate.TxWI.MCS);
-	ate_print("TxMode=%d\n", pAd->ate.TxWI.PHYMODE);
-	ate_print("Addr1=%02x:%02x:%02x:%02x:%02x:%02x\n",
-		pAd->ate.Addr1[0], pAd->ate.Addr1[1], pAd->ate.Addr1[2], pAd->ate.Addr1[3], pAd->ate.Addr1[4], pAd->ate.Addr1[5]);
-	ate_print("Addr2=%02x:%02x:%02x:%02x:%02x:%02x\n",
-		pAd->ate.Addr2[0], pAd->ate.Addr2[1], pAd->ate.Addr2[2], pAd->ate.Addr2[3], pAd->ate.Addr2[4], pAd->ate.Addr2[5]);
-	ate_print("Addr3=%02x:%02x:%02x:%02x:%02x:%02x\n",
-		pAd->ate.Addr3[0], pAd->ate.Addr3[1], pAd->ate.Addr3[2], pAd->ate.Addr3[3], pAd->ate.Addr3[4], pAd->ate.Addr3[5]);
-	ate_print("Channel=%d\n", pAd->ate.Channel);
-	ate_print("TxLength=%d\n", pAd->ate.TxLength);
-	ate_print("TxCount=%u\n", pAd->ate.TxCount);
-	ate_print("RFFreqOffset=%d\n", pAd->ate.RFFreqOffset);
-	ate_print(KERN_EMERG "Set_ATE_Show_Proc Success\n");
-	return TRUE;
-}
-
-INT	Set_ATE_Help_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ate_print("ATE=ATESTART, ATESTOP, TXCONT, TXCARR, TXFRAME, RXFRAME\n");
-	ate_print("ATEDA\n");
-	ate_print("ATESA\n");
-	ate_print("ATEBSSID\n");
-	ate_print("ATECHANNEL, range:0~14(unless A band !)\n");
-	ate_print("ATETXPOW0, set power level of antenna 1.\n");
-	ate_print("ATETXPOW1, set power level of antenna 2.\n");
-	ate_print("ATETXANT, set TX antenna. 0:all, 1:antenna one, 2:antenna two.\n");
-	ate_print("ATERXANT, set RX antenna.0:all, 1:antenna one, 2:antenna two, 3:antenna three.\n");
-	ate_print("ATETXFREQOFFSET, set frequency offset, range 0~63\n");
-	ate_print("ATETXBW, set BandWidth, 0:20MHz, 1:40MHz.\n");
-	ate_print("ATETXLEN, set Frame length, range 24~%d\n", (MAX_FRAME_SIZE - 34/* == 2312 */));
-	ate_print("ATETXCNT, set how many frame going to transmit.\n");
-	ate_print("ATETXMCS, set MCS, reference to rate table.\n");
-	ate_print("ATETXMODE, set Mode 0:CCK, 1:OFDM, 2:HT-Mix, 3:GreenField, reference to rate table.\n");
-	ate_print("ATETXGI, set GI interval, 0:Long, 1:Short\n");
-	ate_print("ATERXFER, 0:disable Rx Frame error rate. 1:enable Rx Frame error rate.\n");
-	ate_print("ATERRF, show all RF registers.\n");
-	ate_print("ATEWRF1, set RF1 register.\n");
-	ate_print("ATEWRF2, set RF2 register.\n");
-	ate_print("ATEWRF3, set RF3 register.\n");
-	ate_print("ATEWRF4, set RF4 register.\n");
-	ate_print("ATELDE2P, load EEPROM from .bin file.\n");
-	ate_print("ATERE2P, display all EEPROM content.\n");
-	ate_print("ATESHOW, display all parameters of ATE.\n");
-	ate_print("ATEHELP, online help.\n");
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	AsicSwitchChannel() dedicated for ATE.
-
-    ==========================================================================
-*/
-VOID ATEAsicSwitchChannel(
-    IN PRTMP_ADAPTER pAd)
-{
-	UINT32 R2 = 0, R3 = DEFAULT_RF_TX_POWER, R4 = 0, Value = 0;
-	CHAR TxPwer = 0, TxPwer2 = 0;
-	UCHAR index, BbpValue = 0, R66 = 0x30;
-	RTMP_RF_REGS *RFRegTable;
-	UCHAR Channel;
-
-#ifdef RALINK_28xx_QA
-	if ((pAd->ate.bQATxStart == TRUE) || (pAd->ate.bQARxStart == TRUE))
-	{
-		if (pAd->ate.Channel != pAd->LatchRfRegs.Channel)
-		{
-			pAd->ate.Channel = pAd->LatchRfRegs.Channel;
-		}
-		return;
-	}
-	else
-#endif // RALINK_28xx_QA //
-	Channel = pAd->ate.Channel;
-
-	// Select antenna
-	AsicAntennaSelect(pAd, Channel);
-
-	// fill Tx power value
-	TxPwer = pAd->ate.TxPower0;
-	TxPwer2 = pAd->ate.TxPower1;
-
-	RFRegTable = RF2850RegTable;
-
-	switch (pAd->RfIcType)
-	{
-		/* But only 2850 and 2750 support 5.5GHz band... */
-		case RFIC_2820:
-		case RFIC_2850:
-		case RFIC_2720:
-		case RFIC_2750:
-
-			for (index = 0; index < NUM_OF_2850_CHNL; index++)
-			{
-				if (Channel == RFRegTable[index].Channel)
-				{
-					R2 = RFRegTable[index].R2;
-					if (pAd->Antenna.field.TxPath == 1)
-					{
-						R2 |= 0x4000;	// If TXpath is 1, bit 14 = 1;
-					}
-
-					if (pAd->Antenna.field.RxPath == 2)
-					{
-						switch (pAd->ate.RxAntennaSel)
-						{
-							case 1:
-								R2 |= 0x20040;
-								ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
-								BbpValue &= 0xE4;
-								BbpValue |= 0x00;
-								ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
-								break;
-							case 2:
-								R2 |= 0x10040;
-								ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
-								BbpValue &= 0xE4;
-								BbpValue |= 0x01;
-								ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
-								break;
-							default:
-								R2 |= 0x40;
-								ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
-								BbpValue &= 0xE4;
-								/* Only enable two Antenna to receive. */
-								BbpValue |= 0x08;
-								ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
-								break;
-						}
-					}
-					else if (pAd->Antenna.field.RxPath == 1)
-					{
-						R2 |= 0x20040;	// write 1 to off RxPath
-					}
-
-					if (pAd->Antenna.field.TxPath == 2)
-					{
-						if (pAd->ate.TxAntennaSel == 1)
-						{
-							R2 |= 0x4000;	// If TX Antenna select is 1 , bit 14 = 1; Disable Ant 2
-							ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BbpValue);
-							BbpValue &= 0xE7;		//11100111B
-							ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BbpValue);
-						}
-						else if (pAd->ate.TxAntennaSel == 2)
-						{
-							R2 |= 0x8000;	// If TX Antenna select is 2 , bit 15 = 1; Disable Ant 1
-							ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BbpValue);
-							BbpValue &= 0xE7;
-							BbpValue |= 0x08;
-							ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BbpValue);
-						}
-						else
-						{
-							ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BbpValue);
-							BbpValue &= 0xE7;
-							BbpValue |= 0x10;
-							ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BbpValue);
-						}
-					}
-					if (pAd->Antenna.field.RxPath == 3)
-					{
-						switch (pAd->ate.RxAntennaSel)
-						{
-							case 1:
-								R2 |= 0x20040;
-								ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
-								BbpValue &= 0xE4;
-								BbpValue |= 0x00;
-								ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
-								break;
-							case 2:
-								R2 |= 0x10040;
-								ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
-								BbpValue &= 0xE4;
-								BbpValue |= 0x01;
-								ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
-								break;
-							case 3:
-								R2 |= 0x30000;
-								ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
-								BbpValue &= 0xE4;
-								BbpValue |= 0x02;
-								ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
-								break;
-							default:
-								ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
-								BbpValue &= 0xE4;
-								BbpValue |= 0x10;
-								ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
-								break;
-						}
-					}
-
-					if (Channel > 14)
-					{
-						// initialize R3, R4
-						R3 = (RFRegTable[index].R3 & 0xffffc1ff);
-						R4 = (RFRegTable[index].R4 & (~0x001f87c0)) | (pAd->ate.RFFreqOffset << 15);
-
-                        // According the Rory's suggestion to solve the middle range issue.
-						// 5.5G band power range: 0xF9~0X0F, TX0 Reg3 bit9/TX1 Reg4 bit6="0" means the TX power reduce 7dB
-						// R3
-						if ((TxPwer >= -7) && (TxPwer < 0))
-						{
-							TxPwer = (7+TxPwer);
-							TxPwer = (TxPwer > 0xF) ? (0xF) : (TxPwer);
-							R3 |= (TxPwer << 10);
-							ATEDBGPRINT(RT_DEBUG_TRACE, ("ATEAsicSwitchChannel: TxPwer=%d \n", TxPwer));
-						}
-						else
-						{
-							TxPwer = (TxPwer > 0xF) ? (0xF) : (TxPwer);
-							R3 |= (TxPwer << 10) | (1 << 9);
-						}
-
-						// R4
-						if ((TxPwer2 >= -7) && (TxPwer2 < 0))
-						{
-							TxPwer2 = (7+TxPwer2);
-							TxPwer2 = (TxPwer2 > 0xF) ? (0xF) : (TxPwer2);
-							R4 |= (TxPwer2 << 7);
-							ATEDBGPRINT(RT_DEBUG_TRACE, ("ATEAsicSwitchChannel: TxPwer2=%d \n", TxPwer2));
-						}
-						else
-						{
-							TxPwer2 = (TxPwer2 > 0xF) ? (0xF) : (TxPwer2);
-							R4 |= (TxPwer2 << 7) | (1 << 6);
-						}
-					}
-					else
-					{
-						R3 = (RFRegTable[index].R3 & 0xffffc1ff) | (TxPwer << 9); // set TX power0
-						R4 = (RFRegTable[index].R4 & (~0x001f87c0)) | (pAd->ate.RFFreqOffset << 15) | (TxPwer2 <<6);// Set freq offset & TxPwr1
-					}
-
-					// Based on BBP current mode before changing RF channel.
-					if (pAd->ate.TxWI.BW == BW_40)
-					{
-						R4 |=0x200000;
-					}
-
-					// Update variables
-					pAd->LatchRfRegs.Channel = Channel;
-					pAd->LatchRfRegs.R1 = RFRegTable[index].R1;
-					pAd->LatchRfRegs.R2 = R2;
-					pAd->LatchRfRegs.R3 = R3;
-					pAd->LatchRfRegs.R4 = R4;
-
-					RtmpRfIoWrite(pAd);
-
-					break;
-				}
-			}
-			break;
-
-		default:
-			break;
-	}
-
-	// Change BBP setting during switch from a->g, g->a
-	if (Channel <= 14)
-	{
-	    ULONG	TxPinCfg = 0x00050F0A;// 2007.10.09 by Brian : 0x0005050A ==> 0x00050F0A
-
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R62, (0x37 - GET_LNA_GAIN(pAd)));
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R63, (0x37 - GET_LNA_GAIN(pAd)));
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R64, (0x37 - GET_LNA_GAIN(pAd)));
-
-		/* For 1T/2R chip only... */
-	    if (pAd->NicConfig2.field.ExternalLNAForG)
-	    {
-	        ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0x62);
-	    }
-	    else
-	    {
-	        ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0x84);
-	    }
-
-        // According the Rory's suggestion to solve the middle range issue.
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R86, &BbpValue);
-		ASSERT((BbpValue == 0x00));
-		if ((BbpValue != 0x00))
-		{
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0x00);
-		}
-
-		// 5.5GHz band selection PIN, bit1 and bit2 are complement
-		RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
-		Value &= (~0x6);
-		Value |= (0x04);
-		RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
-
-        // Turn off unused PA or LNA when only 1T or 1R.
-		if (pAd->Antenna.field.TxPath == 1)
-		{
-			TxPinCfg &= 0xFFFFFFF3;
-		}
-		if (pAd->Antenna.field.RxPath == 1)
-		{
-			TxPinCfg &= 0xFFFFF3FF;
-		}
-
-		RTMP_IO_WRITE32(pAd, TX_PIN_CFG, TxPinCfg);
-	}
-	else
-	{
-	    ULONG	TxPinCfg = 0x00050F05;//2007.10.09 by Brian : 0x00050505 ==> 0x00050F05
-
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R62, (0x37 - GET_LNA_GAIN(pAd)));
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R63, (0x37 - GET_LNA_GAIN(pAd)));
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R64, (0x37 - GET_LNA_GAIN(pAd)));
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0xF2);
-
-        // According the Rory's suggestion to solve the middle range issue.
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R86, &BbpValue);
-		ASSERT((BbpValue == 0x00));
-		if ((BbpValue != 0x00))
-		{
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0x00);
-		}
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R91, &BbpValue);
-		ASSERT((BbpValue == 0x04));
-
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R92, &BbpValue);
-		ASSERT((BbpValue == 0x00));
-
-		// 5.5GHz band selection PIN, bit1 and bit2 are complement
-		RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
-		Value &= (~0x6);
-		Value |= (0x02);
-		RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
-
-        // Turn off unused PA or LNA when only 1T or 1R.
-		if (pAd->Antenna.field.TxPath == 1)
-		{
-			TxPinCfg &= 0xFFFFFFF3;
-	    }
-		if (pAd->Antenna.field.RxPath == 1)
-		{
-			TxPinCfg &= 0xFFFFF3FF;
-		}
-
-		RTMP_IO_WRITE32(pAd, TX_PIN_CFG, TxPinCfg);
-	}
-
-    // R66 should be set according to Channel and use 20MHz when scanning
-	if (Channel <= 14)
-	{
-		// BG band
-		R66 = 0x2E + GET_LNA_GAIN(pAd);
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-	}
-	else
-	{
-		// 5.5 GHz band
-		if (pAd->ate.TxWI.BW == BW_20)
-		{
-			R66 = (UCHAR)(0x32 + (GET_LNA_GAIN(pAd)*5)/3);
-    		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-		}
-		else
-		{
-			R66 = (UCHAR)(0x3A + (GET_LNA_GAIN(pAd)*5)/3);
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-		}
-	}
-
-	//
-	// On 11A, We should delay and wait RF/BBP to be stable
-	// and the appropriate time should be 1000 micro seconds
-	// 2005/06/05 - On 11G, We also need this delay time. Otherwise it's difficult to pass the WHQL.
-	//
-	RTMPusecDelay(1000);
-
-	if (Channel > 14)
-	{
-		// When 5.5GHz band the LSB of TxPwr will be used to reduced 7dB or not.
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, %dT) to , R1=0x%08lx, R2=0x%08lx, R3=0x%08lx, R4=0x%08lx\n",
-								  Channel,
-								  pAd->RfIcType,
-								  pAd->Antenna.field.TxPath,
-								  pAd->LatchRfRegs.R1,
-								  pAd->LatchRfRegs.R2,
-								  pAd->LatchRfRegs.R3,
-								  pAd->LatchRfRegs.R4));
-	}
-	else
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, Pwr0=%u, Pwr1=%u, %dT) to , R1=0x%08lx, R2=0x%08lx, R3=0x%08lx, R4=0x%08lx\n",
-								  Channel,
-								  pAd->RfIcType,
-								  (R3 & 0x00003e00) >> 9,
-								  (R4 & 0x000007c0) >> 6,
-								  pAd->Antenna.field.TxPath,
-								  pAd->LatchRfRegs.R1,
-								  pAd->LatchRfRegs.R2,
-								  pAd->LatchRfRegs.R3,
-								  pAd->LatchRfRegs.R4));
-    }
-}
-
-//
-// In fact, no one will call this routine so far !
-//
-/*
-	==========================================================================
-	Description:
-		Gives CCK TX rate 2 more dB TX power.
-		This routine works only in ATE mode.
-
-		calculate desired Tx power in RF R3.Tx0~5,	should consider -
-		0. if current radio is a noisy environment (pAd->DrsCounters.fNoisyEnvironment)
-		1. TxPowerPercentage
-		2. auto calibration based on TSSI feedback
-		3. extra 2 db for CCK
-		4. -10 db upon very-short distance (AvgRSSI >= -40db) to AP
-
-	NOTE: Since this routine requires the value of (pAd->DrsCounters.fNoisyEnvironment),
-		it should be called AFTER MlmeDynamicTxRateSwitching()
-	==========================================================================
- */
-VOID ATEAsicAdjustTxPower(
-	IN PRTMP_ADAPTER pAd)
-{
-	INT			i, j;
-	CHAR		DeltaPwr = 0;
-	BOOLEAN		bAutoTxAgc = FALSE;
-	UCHAR		TssiRef, *pTssiMinusBoundary, *pTssiPlusBoundary, TxAgcStep;
-	UCHAR		BbpR49 = 0, idx;
-	PCHAR		pTxAgcCompensate;
-	ULONG		TxPwr[5];
-	CHAR		Value;
-
-	/* no one calls this procedure so far */
-	if (pAd->ate.TxWI.BW == BW_40)
-	{
-		if (pAd->ate.Channel > 14)
-		{
-			TxPwr[0] = pAd->Tx40MPwrCfgABand[0];
-			TxPwr[1] = pAd->Tx40MPwrCfgABand[1];
-			TxPwr[2] = pAd->Tx40MPwrCfgABand[2];
-			TxPwr[3] = pAd->Tx40MPwrCfgABand[3];
-			TxPwr[4] = pAd->Tx40MPwrCfgABand[4];
-		}
-		else
-		{
-			TxPwr[0] = pAd->Tx40MPwrCfgGBand[0];
-			TxPwr[1] = pAd->Tx40MPwrCfgGBand[1];
-			TxPwr[2] = pAd->Tx40MPwrCfgGBand[2];
-			TxPwr[3] = pAd->Tx40MPwrCfgGBand[3];
-			TxPwr[4] = pAd->Tx40MPwrCfgGBand[4];
-		}
-	}
-	else
-	{
-		if (pAd->ate.Channel > 14)
-		{
-			TxPwr[0] = pAd->Tx20MPwrCfgABand[0];
-			TxPwr[1] = pAd->Tx20MPwrCfgABand[1];
-			TxPwr[2] = pAd->Tx20MPwrCfgABand[2];
-			TxPwr[3] = pAd->Tx20MPwrCfgABand[3];
-			TxPwr[4] = pAd->Tx20MPwrCfgABand[4];
-		}
-		else
-		{
-			TxPwr[0] = pAd->Tx20MPwrCfgGBand[0];
-			TxPwr[1] = pAd->Tx20MPwrCfgGBand[1];
-			TxPwr[2] = pAd->Tx20MPwrCfgGBand[2];
-			TxPwr[3] = pAd->Tx20MPwrCfgGBand[3];
-			TxPwr[4] = pAd->Tx20MPwrCfgGBand[4];
-		}
-	}
-
-	// TX power compensation for temperature variation based on TSSI.
-	// Do it per 4 seconds.
-	if (pAd->Mlme.OneSecPeriodicRound % 4 == 0)
-	{
-		if (pAd->ate.Channel <= 14)
-		{
-			/* bg channel */
-			bAutoTxAgc         = pAd->bAutoTxAgcG;
-			TssiRef            = pAd->TssiRefG;
-			pTssiMinusBoundary = &pAd->TssiMinusBoundaryG[0];
-			pTssiPlusBoundary  = &pAd->TssiPlusBoundaryG[0];
-			TxAgcStep          = pAd->TxAgcStepG;
-			pTxAgcCompensate   = &pAd->TxAgcCompensateG;
-		}
-		else
-		{
-			/* a channel */
-			bAutoTxAgc         = pAd->bAutoTxAgcA;
-			TssiRef            = pAd->TssiRefA;
-			pTssiMinusBoundary = &pAd->TssiMinusBoundaryA[0];
-			pTssiPlusBoundary  = &pAd->TssiPlusBoundaryA[0];
-			TxAgcStep          = pAd->TxAgcStepA;
-			pTxAgcCompensate   = &pAd->TxAgcCompensateA;
-		}
-
-		if (bAutoTxAgc)
-		{
-			/* BbpR49 is unsigned char */
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R49, &BbpR49);
-
-			/* (p) TssiPlusBoundaryG[0] = 0 = (m) TssiMinusBoundaryG[0] */
-			/* compensate: +4     +3   +2   +1    0   -1   -2   -3   -4 * steps */
-			/* step value is defined in pAd->TxAgcStepG for tx power value */
-
-			/* [4]+1+[4]   p4     p3   p2   p1   o1   m1   m2   m3   m4 */
-			/* ex:         0x00 0x15 0x25 0x45 0x88 0xA0 0xB5 0xD0 0xF0
-			   above value are examined in mass factory production */
-			/*             [4]    [3]  [2]  [1]  [0]  [1]  [2]  [3]  [4] */
-
-			/* plus is 0x10 ~ 0x40, minus is 0x60 ~ 0x90 */
-			/* if value is between p1 ~ o1 or o1 ~ s1, no need to adjust tx power */
-			/* if value is 0x65, tx power will be -= TxAgcStep*(2-1) */
-
-			if (BbpR49 > pTssiMinusBoundary[1])
-			{
-				// Reading is larger than the reference value.
-				// Check for how large we need to decrease the Tx power.
-				for (idx = 1; idx < 5; idx++)
-				{
-					if (BbpR49 <= pTssiMinusBoundary[idx])  // Found the range
-						break;
-				}
-				// The index is the step we should decrease, idx = 0 means there is nothing to compensate
-//				if (R3 > (ULONG) (TxAgcStep * (idx-1)))
-					*pTxAgcCompensate = -(TxAgcStep * (idx-1));
-//				else
-//					*pTxAgcCompensate = -((UCHAR)R3);
-
-				DeltaPwr += (*pTxAgcCompensate);
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("-- Tx Power, BBP R1=%x, TssiRef=%x, TxAgcStep=%x, step = -%d\n",
-					BbpR49, TssiRef, TxAgcStep, idx-1));
-			}
-			else if (BbpR49 < pTssiPlusBoundary[1])
-			{
-				// Reading is smaller than the reference value
-				// check for how large we need to increase the Tx power
-				for (idx = 1; idx < 5; idx++)
-				{
-					if (BbpR49 >= pTssiPlusBoundary[idx])   // Found the range
-						break;
-				}
-				// The index is the step we should increase, idx = 0 means there is nothing to compensate
-				*pTxAgcCompensate = TxAgcStep * (idx-1);
-				DeltaPwr += (*pTxAgcCompensate);
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("++ Tx Power, BBP R1=%x, TssiRef=%x, TxAgcStep=%x, step = +%d\n",
-					BbpR49, TssiRef, TxAgcStep, idx-1));
-			}
-			else
-			{
-				*pTxAgcCompensate = 0;
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("   Tx Power, BBP R1=%x, TssiRef=%x, TxAgcStep=%x, step = +%d\n",
-					BbpR49, TssiRef, TxAgcStep, 0));
-			}
-		}
-	}
-	else
-	{
-		if (pAd->ate.Channel <= 14)
-		{
-			bAutoTxAgc         = pAd->bAutoTxAgcG;
-			pTxAgcCompensate   = &pAd->TxAgcCompensateG;
-		}
-		else
-		{
-			bAutoTxAgc         = pAd->bAutoTxAgcA;
-			pTxAgcCompensate   = &pAd->TxAgcCompensateA;
-		}
-
-		if (bAutoTxAgc)
-			DeltaPwr += (*pTxAgcCompensate);
-	}
-
-	/* calculate delta power based on the percentage specified from UI */
-	// E2PROM setting is calibrated for maximum TX power (i.e. 100%)
-	// We lower TX power here according to the percentage specified from UI
-	if (pAd->CommonCfg.TxPowerPercentage == 0xffffffff)       // AUTO TX POWER control
-		;
-	else if (pAd->CommonCfg.TxPowerPercentage > 90)  // 91 ~ 100% & AUTO, treat as 100% in terms of mW
-		;
-	else if (pAd->CommonCfg.TxPowerPercentage > 60)  // 61 ~ 90%, treat as 75% in terms of mW
-	{
-		DeltaPwr -= 1;
-	}
-	else if (pAd->CommonCfg.TxPowerPercentage > 30)  // 31 ~ 60%, treat as 50% in terms of mW
-	{
-		DeltaPwr -= 3;
-	}
-	else if (pAd->CommonCfg.TxPowerPercentage > 15)  // 16 ~ 30%, treat as 25% in terms of mW
-	{
-		DeltaPwr -= 6;
-	}
-	else if (pAd->CommonCfg.TxPowerPercentage > 9)   // 10 ~ 15%, treat as 12.5% in terms of mW
-	{
-		DeltaPwr -= 9;
-	}
-	else                                           // 0 ~ 9 %, treat as MIN(~3%) in terms of mW
-	{
-		DeltaPwr -= 12;
-	}
-
-	/* reset different new tx power for different TX rate */
-	for(i=0; i<5; i++)
-	{
-		if (TxPwr[i] != 0xffffffff)
-		{
-			for (j=0; j<8; j++)
-			{
-				Value = (CHAR)((TxPwr[i] >> j*4) & 0x0F); /* 0 ~ 15 */
-
-				if ((Value + DeltaPwr) < 0)
-				{
-					Value = 0; /* min */
-				}
-				else if ((Value + DeltaPwr) > 0xF)
-				{
-					Value = 0xF; /* max */
-				}
-				else
-				{
-					Value += DeltaPwr; /* temperature compensation */
-				}
-
-				/* fill new value to CSR offset */
-				TxPwr[i] = (TxPwr[i] & ~(0x0000000F << j*4)) | (Value << j*4);
-			}
-
-			/* write tx power value to CSR */
-			/* TX_PWR_CFG_0 (8 tx rate) for	TX power for OFDM 12M/18M
-											TX power for OFDM 6M/9M
-											TX power for CCK5.5M/11M
-											TX power for CCK1M/2M */
-			/* TX_PWR_CFG_1 ~ TX_PWR_CFG_4 */
-			RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, TxPwr[i]);
-
-
-		}
-	}
-
-}
-
-/*
-	========================================================================
-	Routine Description:
-		Write TxWI for ATE mode.
-
-	Return Value:
-		None
-	========================================================================
-*/
-
-#ifdef RT2870
-static VOID ATEWriteTxWI(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PTXWI_STRUC 	pTxWI,
-	IN	BOOLEAN			FRAG,
-	IN	BOOLEAN			InsTimestamp,
-	IN	BOOLEAN 		AMPDU,
-	IN	BOOLEAN 		Ack,
-	IN	BOOLEAN 		NSeq,		// HW new a sequence.
-	IN	UCHAR			BASize,
-	IN	UCHAR			WCID,
-	IN	ULONG			Length,
-	IN	UCHAR 			PID,
-	IN	UCHAR			MIMOps,
-	IN	UCHAR			Txopmode,
-	IN	BOOLEAN			CfAck,
-	IN	HTTRANSMIT_SETTING	Transmit)
-{
-	//
-	// Always use Long preamble before verifiation short preamble functionality works well.
-	// Todo: remove the following line if short preamble functionality works
-	//
-	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
-	pTxWI->FRAG= FRAG;
-	pTxWI->TS= InsTimestamp;
-	pTxWI->AMPDU = AMPDU;
-
-	pTxWI->MIMOps = PWR_ACTIVE;
-	pTxWI->MpduDensity = 4;
-	pTxWI->ACK = Ack;
-	pTxWI->txop = Txopmode;
-	pTxWI->NSEQ = NSeq;
-	pTxWI->BAWinSize = BASize;
-
-	pTxWI->WirelessCliID = WCID;
-	pTxWI->MPDUtotalByteCount = Length;
-	pTxWI->PacketId = PID;
-
-	pTxWI->BW = Transmit.field.BW;
-	pTxWI->ShortGI = Transmit.field.ShortGI;
-	pTxWI->STBC= Transmit.field.STBC;
-
-	pTxWI->MCS = Transmit.field.MCS;
-	pTxWI->PHYMODE= Transmit.field.MODE;
-
-#ifdef DOT11_N_SUPPORT
-	//
-	// MMPS is 802.11n features. Because TxWI->MCS > 7 must be HT mode,
-	// so need not check if it's HT rate.
-	//
-	if ((MIMOps == MMPS_STATIC) && (pTxWI->MCS > 7))
-		pTxWI->MCS = 7;
-
-	if ((MIMOps == MMPS_DYNAMIC) && (pTxWI->MCS > 7)) // SMPS protect 2 spatial.
-		pTxWI->MIMOps = 1;
-#endif // DOT11_N_SUPPORT //
-
-	pTxWI->CFACK = CfAck;
-
-	return;
-}
-#endif // RT2870 //
-/*
-	========================================================================
-
-	Routine Description:
-		Disable protection for ATE.
-	========================================================================
-*/
-VOID ATEDisableAsicProtect(
-	IN		PRTMP_ADAPTER	pAd)
-{
-	PROT_CFG_STRUC	ProtCfg, ProtCfg4;
-	UINT32 Protect[6];
-	USHORT			offset;
-	UCHAR			i;
-	UINT32 MacReg = 0;
-
-	// Config ASIC RTS threshold register
-	RTMP_IO_READ32(pAd, TX_RTS_CFG, &MacReg);
-	MacReg &= 0xFF0000FF;
-	MacReg |= (pAd->CommonCfg.RtsThreshold << 8);
-	RTMP_IO_WRITE32(pAd, TX_RTS_CFG, MacReg);
-
-	// Initial common protection settings
-	RTMPZeroMemory(Protect, sizeof(Protect));
-	ProtCfg4.word = 0;
-	ProtCfg.word = 0;
-	ProtCfg.field.TxopAllowGF40 = 1;
-	ProtCfg.field.TxopAllowGF20 = 1;
-	ProtCfg.field.TxopAllowMM40 = 1;
-	ProtCfg.field.TxopAllowMM20 = 1;
-	ProtCfg.field.TxopAllowOfdm = 1;
-	ProtCfg.field.TxopAllowCck = 1;
-	ProtCfg.field.RTSThEn = 1;
-	ProtCfg.field.ProtectNav = ASIC_SHORTNAV;
-
-	// Handle legacy(B/G) protection
-	ProtCfg.field.ProtectRate = pAd->CommonCfg.RtsRate;
-	ProtCfg.field.ProtectCtrl = 0;
-	Protect[0] = ProtCfg.word;
-	Protect[1] = ProtCfg.word;
-
-	// NO PROTECT
-	// 1.All STAs in the BSS are 20/40 MHz HT
-	// 2. in ai 20/40MHz BSS
-	// 3. all STAs are 20MHz in a 20MHz BSS
-	// Pure HT. no protection.
-
-	// MM20_PROT_CFG
-	//	Reserved (31:27)
-	// 	PROT_TXOP(25:20) -- 010111
-	//	PROT_NAV(19:18)  -- 01 (Short NAV protection)
-	//  PROT_CTRL(17:16) -- 00 (None)
-	// 	PROT_RATE(15:0)  -- 0x4004 (OFDM 24M)
-	Protect[2] = 0x01744004;
-
-	// MM40_PROT_CFG
-	//	Reserved (31:27)
-	// 	PROT_TXOP(25:20) -- 111111
-	//	PROT_NAV(19:18)  -- 01 (Short NAV protection)
-	//  PROT_CTRL(17:16) -- 00 (None)
-	// 	PROT_RATE(15:0)  -- 0x4084 (duplicate OFDM 24M)
-	Protect[3] = 0x03f44084;
-
-	// CF20_PROT_CFG
-	//	Reserved (31:27)
-	// 	PROT_TXOP(25:20) -- 010111
-	//	PROT_NAV(19:18)  -- 01 (Short NAV protection)
-	//  PROT_CTRL(17:16) -- 00 (None)
-	// 	PROT_RATE(15:0)  -- 0x4004 (OFDM 24M)
-	Protect[4] = 0x01744004;
-
-	// CF40_PROT_CFG
-	//	Reserved (31:27)
-	// 	PROT_TXOP(25:20) -- 111111
-	//	PROT_NAV(19:18)  -- 01 (Short NAV protection)
-	//  PROT_CTRL(17:16) -- 00 (None)
-	// 	PROT_RATE(15:0)  -- 0x4084 (duplicate OFDM 24M)
-	Protect[5] = 0x03f44084;
-
-	pAd->CommonCfg.IOTestParm.bRTSLongProtOn = FALSE;
-
-	offset = CCK_PROT_CFG;
-	for (i = 0;i < 6;i++)
-		RTMP_IO_WRITE32(pAd, offset + i*4, Protect[i]);
-
-}
-
-#ifdef RT2870
-/*
-	========================================================================
-	Routine	Description:
-		Write TxInfo for ATE mode.
-
-	Return Value:
-		None
-	========================================================================
-*/
-static VOID ATEWriteTxInfo(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PTXINFO_STRUC 	pTxInfo,
-	IN	USHORT		USBDMApktLen,
-	IN	BOOLEAN		bWiv,
-	IN	UCHAR			QueueSel,
-	IN	UCHAR			NextValid,
-	IN	UCHAR			TxBurst)
-{
-	pTxInfo->USBDMATxPktLen = USBDMApktLen;
-	pTxInfo->QSEL = QueueSel;
-
-	if (QueueSel != FIFO_EDCA)
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("=======> QueueSel != FIFO_EDCA<=======\n"));
-
-	pTxInfo->USBDMANextVLD = NextValid;
-	pTxInfo->USBDMATxburst = TxBurst;
-	pTxInfo->WIV = bWiv;
-	pTxInfo->SwUseLastRound = 0;
-	pTxInfo->rsv = 0;
-	pTxInfo->rsv2 = 0;
-
-	return;
-}
-#endif // RT2870 //
-
-/* There are two ways to convert Rssi */
-#if 1
-//
-// The way used with GET_LNA_GAIN().
-//
-CHAR ATEConvertToRssi(
-	IN PRTMP_ADAPTER pAd,
-	IN	CHAR	Rssi,
-	IN  UCHAR   RssiNumber)
-{
-	UCHAR	RssiOffset, LNAGain;
-
-	// Rssi equals to zero should be an invalid value
-	if (Rssi == 0)
-		return -99;
-
-	LNAGain = GET_LNA_GAIN(pAd);
-	if (pAd->LatchRfRegs.Channel > 14)
-	{
-		if (RssiNumber == 0)
-			RssiOffset = pAd->ARssiOffset0;
-		else if (RssiNumber == 1)
-			RssiOffset = pAd->ARssiOffset1;
-		else
-			RssiOffset = pAd->ARssiOffset2;
-	}
-	else
-	{
-		if (RssiNumber == 0)
-			RssiOffset = pAd->BGRssiOffset0;
-		else if (RssiNumber == 1)
-			RssiOffset = pAd->BGRssiOffset1;
-		else
-			RssiOffset = pAd->BGRssiOffset2;
-	}
-
-	return (-12 - RssiOffset - LNAGain - Rssi);
-}
-#else
-//
-// The way originally used in ATE of rt2860ap.
-//
-CHAR ATEConvertToRssi(
-	IN PRTMP_ADAPTER pAd,
-	IN	CHAR			Rssi,
-	IN  UCHAR   RssiNumber)
-{
-	UCHAR	RssiOffset, LNAGain;
-
-	// Rssi equals to zero should be an invalid value
-	if (Rssi == 0)
-		return -99;
-
-    if (pAd->LatchRfRegs.Channel > 14)
-    {
-        LNAGain = pAd->ALNAGain;
-        if (RssiNumber == 0)
-			RssiOffset = pAd->ARssiOffset0;
-		else if (RssiNumber == 1)
-			RssiOffset = pAd->ARssiOffset1;
-		else
-			RssiOffset = pAd->ARssiOffset2;
-    }
-    else
-    {
-        LNAGain = pAd->BLNAGain;
-        if (RssiNumber == 0)
-			RssiOffset = pAd->BGRssiOffset0;
-		else if (RssiNumber == 1)
-			RssiOffset = pAd->BGRssiOffset1;
-		else
-			RssiOffset = pAd->BGRssiOffset2;
-    }
-
-    return (-32 - RssiOffset + LNAGain - Rssi);
-}
-#endif /* end of #if 1 */
-
-/*
-	========================================================================
-
-	Routine Description:
-		Set Japan filter coefficients if needed.
-	Note:
-		This routine should only be called when
-		entering TXFRAME mode or TXCONT mode.
-
-	========================================================================
-*/
-static VOID SetJapanFilter(
-	IN		PRTMP_ADAPTER	pAd)
-{
-	UCHAR			BbpData = 0;
-
-	//
-	// If Channel=14 and Bandwidth=20M and Mode=CCK, set BBP R4 bit5=1
-	// (Japan Tx filter coefficients)when (TXFRAME or TXCONT).
-	//
-	ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BbpData);
-
-    if ((pAd->ate.TxWI.PHYMODE == MODE_CCK) && (pAd->ate.Channel == 14) && (pAd->ate.TxWI.BW == BW_20))
-    {
-        BbpData |= 0x20;    // turn on
-        ATEDBGPRINT(RT_DEBUG_TRACE, ("SetJapanFilter!!!\n"));
-    }
-    else
-    {
-		BbpData &= 0xdf;    // turn off
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ClearJapanFilter!!!\n"));
-    }
-
-	ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BbpData);
-}
-
-VOID ATESampleRssi(
-	IN PRTMP_ADAPTER	pAd,
-	IN PRXWI_STRUC		pRxWI)
-{
-	/* There are two ways to collect RSSI. */
-#if 1
-	//pAd->LastRxRate = (USHORT)((pRxWI->MCS) + (pRxWI->BW <<7) + (pRxWI->ShortGI <<8)+ (pRxWI->PHYMODE <<14)) ;
-	if (pRxWI->RSSI0 != 0)
-	{
-		pAd->ate.LastRssi0	= ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI0, RSSI_0);
-		pAd->ate.AvgRssi0X8	= (pAd->ate.AvgRssi0X8 - pAd->ate.AvgRssi0) + pAd->ate.LastRssi0;
-		pAd->ate.AvgRssi0  	= pAd->ate.AvgRssi0X8 >> 3;
-	}
-	if (pRxWI->RSSI1 != 0)
-	{
-		pAd->ate.LastRssi1	= ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI1, RSSI_1);
-		pAd->ate.AvgRssi1X8	= (pAd->ate.AvgRssi1X8 - pAd->ate.AvgRssi1) + pAd->ate.LastRssi1;
-		pAd->ate.AvgRssi1	= pAd->ate.AvgRssi1X8 >> 3;
-	}
-	if (pRxWI->RSSI2 != 0)
-	{
-		pAd->ate.LastRssi2	= ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI2, RSSI_2);
-		pAd->ate.AvgRssi2X8	= (pAd->ate.AvgRssi2X8 - pAd->ate.AvgRssi2) + pAd->ate.LastRssi2;
-		pAd->ate.AvgRssi2	= pAd->ate.AvgRssi2X8 >> 3;
-	}
-
-	pAd->ate.LastSNR0 = (CHAR)(pRxWI->SNR0);// CHAR ==> UCHAR ?
-	pAd->ate.LastSNR1 = (CHAR)(pRxWI->SNR1);// CHAR ==> UCHAR ?
-
-	pAd->ate.NumOfAvgRssiSample ++;
-#else
-	pAd->ate.LastSNR0 = (CHAR)(pRxWI->SNR0);
-	pAd->ate.LastSNR1 = (CHAR)(pRxWI->SNR1);
-	pAd->ate.RxCntPerSec++;
-	pAd->ate.LastRssi0 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI0, RSSI_0);
-	pAd->ate.LastRssi1 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI1, RSSI_1);
-	pAd->ate.LastRssi2 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI2, RSSI_2);
-	pAd->ate.AvgRssi0X8 = (pAd->ate.AvgRssi0X8 - pAd->ate.AvgRssi0) + pAd->ate.LastRssi0;
-	pAd->ate.AvgRssi0 = pAd->ate.AvgRssi0X8 >> 3;
-	pAd->ate.AvgRssi1X8 = (pAd->ate.AvgRssi1X8 - pAd->ate.AvgRssi1) + pAd->ate.LastRssi1;
-	pAd->ate.AvgRssi1 = pAd->ate.AvgRssi1X8 >> 3;
-	pAd->ate.AvgRssi2X8 = (pAd->ate.AvgRssi2X8 - pAd->ate.AvgRssi2) + pAd->ate.LastRssi2;
-	pAd->ate.AvgRssi2 = pAd->ate.AvgRssi2X8 >> 3;
-	pAd->ate.NumOfAvgRssiSample ++;
-#endif
-}
-
-#ifdef CONFIG_STA_SUPPORT
-VOID RTMPStationStop(
-    IN  PRTMP_ADAPTER   pAd)
-{
-//	BOOLEAN       Cancelled;
-
-    ATEDBGPRINT(RT_DEBUG_TRACE, ("==> RTMPStationStop\n"));
-
-#if 0
-	RTMPCancelTimer(&pAd->MlmeAux.AssocTimer,      &Cancelled);
-	RTMPCancelTimer(&pAd->MlmeAux.ReassocTimer,    &Cancelled);
-	RTMPCancelTimer(&pAd->MlmeAux.DisassocTimer,   &Cancelled);
-	RTMPCancelTimer(&pAd->MlmeAux.AuthTimer,       &Cancelled);
-	RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer,     &Cancelled);
-	RTMPCancelTimer(&pAd->MlmeAux.ScanTimer,       &Cancelled);
-#endif
-	// For rx statistics, we need to keep this timer running.
-//	RTMPCancelTimer(&pAd->Mlme.PeriodicTimer,      &Cancelled);
-
-    ATEDBGPRINT(RT_DEBUG_TRACE, ("<== RTMPStationStop\n"));
-}
-
-VOID RTMPStationStart(
-    IN  PRTMP_ADAPTER   pAd)
-{
-    ATEDBGPRINT(RT_DEBUG_TRACE, ("==> RTMPStationStart\n"));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("<== RTMPStationStart\n"));
-}
-#endif // CONFIG_STA_SUPPORT //
-
-/*
-	==========================================================================
-	Description:
-		Setup Frame format.
-	NOTE:
-		This routine should only be used in ATE mode.
-	==========================================================================
- */
-
-#ifdef RT2870
-/*======================Start of RT2870======================*/
-/*                                                           */
-/*                                                           */
-static INT ATESetUpFrame(
-	IN PRTMP_ADAPTER pAd,
-	IN UINT32 TxIdx)
-{
-	UINT j;
-	PTX_CONTEXT	pNullContext;
-	PUCHAR			pDest;
-	HTTRANSMIT_SETTING	TxHTPhyMode;
-	PTXWI_STRUC		pTxWI;
-	PTXINFO_STRUC		pTxInfo;
-	UINT32			TransferBufferLength, OrgBufferLength = 0;
-	UCHAR			padLen = 0;
-#ifdef RALINK_28xx_QA
-	PHEADER_802_11	pHeader80211 = NULL;
-#endif // RALINK_28xx_QA //
-
-	if ((RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) ||
-		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)) ||
-		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) ||
-		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
-	{
-		return -1;
-	}
-
-	/* We always use QID_AC_BE and FIFO_EDCA in ATE mode. */
-
-	pNullContext = &(pAd->NullContext);
-	ASSERT(pNullContext != NULL);
-
-	if (pNullContext->InUse == FALSE)
-	{
-		// Set the in use bit
-		pNullContext->InUse = TRUE;
-		NdisZeroMemory(&(pAd->NullFrame), sizeof(HEADER_802_11));
-
-		// Fill 802.11 header.
-#ifdef RALINK_28xx_QA
-		if (pAd->ate.bQATxStart == TRUE)
-		{
-			pHeader80211 = NdisMoveMemory(&(pAd->NullFrame), pAd->ate.Header, pAd->ate.HLen);
-//			pDest = NdisMoveMemory(&(pAd->NullFrame), pAd->ate.Header, pAd->ate.HLen);
-//			pHeader80211 = (PHEADER_802_11)pDest;
-		}
-		else
-#endif // RALINK_28xx_QA //
-		{
-			// Fill 802.11 header.
-			NdisMoveMemory(&(pAd->NullFrame), TemplateFrame, sizeof(HEADER_802_11));
-		}
-#ifdef RT_BIG_ENDIAN
-		RTMPFrameEndianChange(pAd, (PUCHAR)&(pAd->NullFrame), DIR_READ, FALSE);
-#endif // RT_BIG_ENDIAN //
-
-#ifdef RALINK_28xx_QA
-		if (pAd->ate.bQATxStart == TRUE)
-		{
-			/* modify sequence number.... */
-			if (pAd->ate.TxDoneCount == 0)
-			{
-				pAd->ate.seq = pHeader80211->Sequence;
-			}
-			else
-			{
-				pHeader80211->Sequence = ++pAd->ate.seq;
-			}
-			/* We already got all the addr. fields from QA GUI. */
-		}
-		else
-#endif // RALINK_28xx_QA //
-		{
-			COPY_MAC_ADDR(pAd->NullFrame.Addr1, pAd->ate.Addr1);
-			COPY_MAC_ADDR(pAd->NullFrame.Addr2, pAd->ate.Addr2);
-			COPY_MAC_ADDR(pAd->NullFrame.Addr3, pAd->ate.Addr3);
-		}
-
-		RTMPZeroMemory(&pAd->NullContext.TransferBuffer->field.WirelessPacket[0], TX_BUFFER_NORMSIZE);//???
-		pTxInfo = (PTXINFO_STRUC)&pAd->NullContext.TransferBuffer->field.WirelessPacket[0];
-
-#ifdef RALINK_28xx_QA
-		if (pAd->ate.bQATxStart == TRUE)
-		{
-			// Avoid to exceed the range of WirelessPacket[].
-			ASSERT(pAd->ate.TxInfo.USBDMATxPktLen <= (MAX_FRAME_SIZE - 34/* == 2312 */));
-			NdisMoveMemory(pTxInfo, &(pAd->ate.TxInfo), sizeof(pAd->ate.TxInfo));
-		}
-		else
-#endif // RALINK_28xx_QA //
-		{
-			// Avoid to exceed the range of WirelessPacket[].
-			ASSERT(pAd->ate.TxLength <= (MAX_FRAME_SIZE - 34/* == 2312 */));
-
-			// pTxInfo->USBDMATxPktLen will be updated to include padding later.
-			ATEWriteTxInfo(pAd, pTxInfo, (USHORT)(TXWI_SIZE + pAd->ate.TxLength), TRUE, EpToQueue[MGMTPIPEIDX], FALSE,  FALSE);
-			pTxInfo->QSEL = FIFO_EDCA;
-		}
-
-		pTxWI = (PTXWI_STRUC)&pAd->NullContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE];
-
-		// Fill TxWI.
-		if (pAd->ate.bQATxStart == TRUE)
-		{
-			TxHTPhyMode.field.BW = pAd->ate.TxWI.BW;
-			TxHTPhyMode.field.ShortGI = pAd->ate.TxWI.ShortGI;
-			TxHTPhyMode.field.STBC = pAd->ate.TxWI.STBC;
-			TxHTPhyMode.field.MCS = pAd->ate.TxWI.MCS;
-			TxHTPhyMode.field.MODE = pAd->ate.TxWI.PHYMODE;
-			ATEWriteTxWI(pAd, pTxWI, pAd->ate.TxWI.FRAG, pAd->ate.TxWI.TS, pAd->ate.TxWI.AMPDU, pAd->ate.TxWI.ACK, pAd->ate.TxWI.NSEQ,
-				pAd->ate.TxWI.BAWinSize, BSSID_WCID, pAd->ate.TxWI.MPDUtotalByteCount/* include 802.11 header */, pAd->ate.TxWI.PacketId, 0, pAd->ate.TxWI.txop/*IFS_HTTXOP*/, pAd->ate.TxWI.CFACK/*FALSE*/, TxHTPhyMode);
-		}
-		else
-		{
-			TxHTPhyMode.field.BW = pAd->ate.TxWI.BW;
-			TxHTPhyMode.field.ShortGI = pAd->ate.TxWI.ShortGI;
-			TxHTPhyMode.field.STBC = 0;
-			TxHTPhyMode.field.MCS = pAd->ate.TxWI.MCS;
-			TxHTPhyMode.field.MODE = pAd->ate.TxWI.PHYMODE;
-
-			ATEWriteTxWI(pAd, pTxWI,  FALSE, FALSE, FALSE, FALSE/* No ack required. */, FALSE, 0, BSSID_WCID, pAd->ate.TxLength,
-				0, 0, IFS_HTTXOP, FALSE, TxHTPhyMode);// "MMPS_STATIC" instead of "MMPS_DYNAMIC" ???
-		}
-
-		RTMPMoveMemory(&pAd->NullContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE+TXWI_SIZE], &pAd->NullFrame, sizeof(HEADER_802_11));
-
-		pDest = &(pAd->NullContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE+TXWI_SIZE+sizeof(HEADER_802_11)]);
-
-		// Prepare frame payload
-#ifdef RALINK_28xx_QA
-		if (pAd->ate.bQATxStart == TRUE)
-		{
-			// copy pattern
-			if ((pAd->ate.PLen != 0))
-			{
-				for (j = 0; j < pAd->ate.DLen; j+=pAd->ate.PLen)
-				{
-					RTMPMoveMemory(pDest, pAd->ate.Pattern, pAd->ate.PLen);
-					pDest += pAd->ate.PLen;
-				}
-			}
-			TransferBufferLength = TXINFO_SIZE + TXWI_SIZE + pAd->ate.TxWI.MPDUtotalByteCount;
-		}
-		else
-#endif // RALINK_28xx_QA //
-		{
-		    for (j = 0; j < (pAd->ate.TxLength - sizeof(HEADER_802_11)); j++)
-		    {
-				*pDest = 0xA5;
-				pDest += 1;
-		    }
-			TransferBufferLength = TXINFO_SIZE + TXWI_SIZE + pAd->ate.TxLength;
-		}
-
-#if 1
-		OrgBufferLength = TransferBufferLength;
-		TransferBufferLength = (TransferBufferLength + 3) & (~3);
-
-		// Always add 4 extra bytes at every packet.
-		padLen = TransferBufferLength - OrgBufferLength + 4;/* 4 == last packet padding */
-		ASSERT((padLen <= (RTMP_PKT_TAIL_PADDING - 4/* 4 == MaxBulkOutsize alignment padding */)));
-
-		/* Now memzero all extra padding bytes. */
-		NdisZeroMemory(pDest, padLen);
-		pDest += padLen;
-#else
-		if ((TransferBufferLength % 4) == 1)
-		{
-			NdisZeroMemory(pDest, 7);
-			pDest += 7;
-			TransferBufferLength  += 3;
-		}
-		else if ((TransferBufferLength % 4) == 2)
-		{
-			NdisZeroMemory(pDest, 6);
-			pDest += 6;
-			TransferBufferLength  += 2;
-		}
-		else if ((TransferBufferLength % 4) == 3)
-		{
-			NdisZeroMemory(pDest, 5);
-			pDest += 5;
-			TransferBufferLength  += 1;
-		}
-#endif // 1 //
-
-		// Update pTxInfo->USBDMATxPktLen to include padding.
-		pTxInfo->USBDMATxPktLen = TransferBufferLength - TXINFO_SIZE;
-
-		TransferBufferLength += 4;
-
-		// If TransferBufferLength is multiple of 64, add extra 4 bytes again.
-		if ((TransferBufferLength % pAd->BulkOutMaxPacketSize) == 0)
-		{
-			NdisZeroMemory(pDest, 4);
-			TransferBufferLength += 4;
-		}
-
-		// Fill out frame length information for global Bulk out arbitor
-		pAd->NullContext.BulkOutSize = TransferBufferLength;
-	}
-#ifdef RT_BIG_ENDIAN
-	RTMPWIEndianChange((PUCHAR)pTxWI, TYPE_TXWI);
-	RTMPFrameEndianChange(pAd, (((PUCHAR)pTxInfo)+TXWI_SIZE+TXINFO_SIZE), DIR_WRITE, FALSE);
-    RTMPDescriptorEndianChange((PUCHAR)pTxInfo, TYPE_TXINFO);
-#endif // RT_BIG_ENDIAN //
-	return 0;
-}
-
-VOID ATE_RTUSBBulkOutDataPacketComplete(purbb_t pUrb, struct pt_regs *pt_regs)
-{
-	PRTMP_ADAPTER		pAd;
-	PTX_CONTEXT		    pNullContext;
-	UCHAR				BulkOutPipeId;
-	NTSTATUS			Status;
-	unsigned long		IrqFlags;
-	ULONG			    OldValue;
-
-	pNullContext = (PTX_CONTEXT)pUrb->context;
-	pAd = pNullContext->pAd;
-
-
-	// Reset Null frame context flags
-	pNullContext->IRPPending = FALSE;
-	pNullContext->InUse = FALSE;
-	Status = pUrb->status;
-
-	// Store BulkOut PipeId
-	BulkOutPipeId = pNullContext->BulkOutPipeId;
-	pAd->BulkOutDataOneSecCount++;
-
-	if (Status == USB_ST_NOERROR)
-	{
-#ifdef RALINK_28xx_QA
-		if ((ATE_ON(pAd)) && (pAd->ate.bQATxStart == TRUE))
-		{
-			if (pAd->ate.QID == BulkOutPipeId)
-			{
-				// Let Rx can have a chance to break in during Tx process,
-				// especially for loopback mode in QA ATE.
-				// To trade off between tx performance and loopback mode integrity.
-				/* Q   : Now Rx is handled by tasklet, do we still need this delay ? */
-				/* Ans : Even tasklet is used, Rx/Tx < 1 if we do not delay for a while right here. */
-				RTMPusecDelay(500);
-				pAd->ate.TxDoneCount++;
-				pAd->RalinkCounters.KickTxCount++;
-				ASSERT(pAd->ate.QID == 0);
-				pAd->ate.TxAc0++;
-			}
-		}
-#endif // RALINK_28xx_QA //
-		pAd->BulkOutComplete++;
-
-		pAd->Counters8023.GoodTransmits++;
-
-		/* Don't worry about the queue is empty or not. This function will check itself. */
-		RTMPDeQueuePacket(pAd, TRUE, BulkOutPipeId, MAX_TX_PROCESS);
-
-		/* In 28xx, SendTxWaitQueue ==> TxSwQueue  */
-/*
-		if (pAd->SendTxWaitQueue[BulkOutPipeId].Number > 0)
-		{
-			RTMPDeQueuePacket(pAd, BulkOutPipeId);
-		}
-*/
-	}
-	else	// STATUS_OTHER
-	{
-		pAd->BulkOutCompleteOther++;
-
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("BulkOutDataPacket Failed STATUS_OTHER = 0x%x . \n", Status));
-		ATEDBGPRINT(RT_DEBUG_ERROR, (">>BulkOutReq=0x%lx, BulkOutComplete=0x%lx\n", pAd->BulkOutReq, pAd->BulkOutComplete));
-
-		if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)))
-		{
-			RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET);
-			/* In 28xx, RT_OID_USB_RESET_BULK_OUT ==> CMDTHREAD_RESET_BULK_OUT */
-			RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT, NULL, 0);
-			// Check
-			BULK_OUT_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-			pAd->BulkOutPending[BulkOutPipeId] = FALSE;
-			pAd->bulkResetPipeid = BulkOutPipeId;
-			BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-			return;
-		}
-	}
-
-
-
-	if (atomic_read(&pAd->BulkOutRemained) > 0)
-	{
-		atomic_dec(&pAd->BulkOutRemained);
-	}
-
-	// 1st - Transmit Success
-	OldValue = pAd->WlanCounters.TransmittedFragmentCount.u.LowPart;
-	pAd->WlanCounters.TransmittedFragmentCount.u.LowPart++;
-
-	if (pAd->WlanCounters.TransmittedFragmentCount.u.LowPart < OldValue)
-	{
-		pAd->WlanCounters.TransmittedFragmentCount.u.HighPart++;
-	}
-
-	if(((pAd->ContinBulkOut == TRUE ) ||(atomic_read(&pAd->BulkOutRemained) > 0)) && (pAd->ate.Mode & ATE_TXFRAME))
-	{
-		RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE);
-	}
-	else
-	{
-		RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE);
-#ifdef RALINK_28xx_QA
-		pAd->ate.TxStatus = 0;
-#endif // RALINK_28xx_QA //
-	}
-
-	BULK_OUT_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-	pAd->BulkOutPending[BulkOutPipeId] = FALSE;
-	BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-
-	// Always call Bulk routine, even reset bulk.
-	// The protection of rest bulk should be in BulkOut routine.
-	RTUSBKickBulkOut(pAd);
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-VOID	ATE_RTUSBBulkOutDataPacket(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			BulkOutPipeId)
-{
-	PTX_CONTEXT		pNullContext = &(pAd->NullContext);
-	PURB			pUrb;
-	int				ret = 0;
-	unsigned long	IrqFlags;
-
-
-	ASSERT(BulkOutPipeId == 0);
-
-	/* Build up the frame first. */
-//	ATESetUpFrame(pAd, 0);
-
-	BULK_OUT_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-
-	if (pAd->BulkOutPending[BulkOutPipeId] == TRUE)
-	{
-		BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-		return;
-	}
-
-	pAd->BulkOutPending[BulkOutPipeId] = TRUE;
-	BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-
-	// Increase Total transmit byte counter
-	pAd->RalinkCounters.OneSecTransmittedByteCount +=  pNullContext->BulkOutSize;
-	pAd->RalinkCounters.TransmittedByteCount +=  pNullContext->BulkOutSize;
-
-	// Clear ATE frame bulk out flag
-	RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE);
-
-	// Init Tx context descriptor
-	pNullContext->IRPPending = TRUE;
-	RTUSBInitTxDesc(pAd, pNullContext, BulkOutPipeId, (usb_complete_t)ATE_RTUSBBulkOutDataPacketComplete);
-	pUrb = pNullContext->pUrb;
-
-	if((ret = RTUSB_SUBMIT_URB(pUrb))!=0)
-	{
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("ATE_RTUSBBulkOutDataPacket: Submit Tx URB failed %d\n", ret));
-		return;
-	}
-
-	pAd->BulkOutReq++;
-	return;
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-VOID	ATE_RTUSBCancelPendingBulkInIRP(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	PRX_CONTEXT		pRxContext;
-	UINT			i;
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("--->ATE_RTUSBCancelPendingBulkInIRP\n"));
-#if 1
-	for ( i = 0; i < (RX_RING_SIZE); i++)
-	{
-		pRxContext = &(pAd->RxContext[i]);
-		if(pRxContext->IRPPending == TRUE)
-		{
-			RTUSB_UNLINK_URB(pRxContext->pUrb);
-			pRxContext->IRPPending = FALSE;
-			pRxContext->InUse = FALSE;
-			//NdisInterlockedDecrement(&pAd->PendingRx);
-			//pAd->PendingRx--;
-		}
-	}
-#else
-	for ( i = 0; i < (RX_RING_SIZE); i++)
-	{
-		pRxContext = &(pAd->RxContext[i]);
-		if(atomic_read(&pRxContext->IrpLock) == IRPLOCK_CANCELABLE)
-		{
-			RTUSB_UNLINK_URB(pRxContext->pUrb);
-		}
-		InterlockedExchange(&pRxContext->IrpLock, IRPLOCK_CANCE_START);
-	}
-#endif // 1 //
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("<---ATE_RTUSBCancelPendingBulkInIRP\n"));
-	return;
-}
-#endif // RT2870 //
-
-VOID rt_ee_read_all(PRTMP_ADAPTER pAd, USHORT *Data)
-{
-	USHORT i;
-	USHORT value;
-
-	for (i = 0 ; i < EEPROM_SIZE/2 ; )
-	{
-		/* "value" is expecially for some compilers... */
-		RT28xx_EEPROM_READ16(pAd, i*2, value);
-		Data[i] = value;
-		i++;
-	}
-}
-
-VOID rt_ee_write_all(PRTMP_ADAPTER pAd, USHORT *Data)
-{
-	USHORT i;
-	USHORT value;
-
-	for (i = 0 ; i < EEPROM_SIZE/2 ; )
-	{
-		/* "value" is expecially for some compilers... */
-		value = Data[i];
-		RT28xx_EEPROM_WRITE16(pAd, i*2, value);
-		i ++;
-	}
-}
-#ifdef RALINK_28xx_QA
-VOID ATE_QA_Statistics(
-	IN PRTMP_ADAPTER			pAd,
-	IN PRXWI_STRUC				pRxWI,
-	IN PRT28XX_RXD_STRUC		pRxD,
-	IN PHEADER_802_11			pHeader)
-{
-	// update counter first
-	if (pHeader != NULL)
-	{
-		if (pHeader->FC.Type == BTYPE_DATA)
-		{
-			if (pRxD->U2M)
-				pAd->ate.U2M++;
-			else
-				pAd->ate.OtherData++;
-		}
-		else if (pHeader->FC.Type == BTYPE_MGMT)
-		{
-			if (pHeader->FC.SubType == SUBTYPE_BEACON)
-				pAd->ate.Beacon++;
-			else
-				pAd->ate.OtherCount++;
-		}
-		else if (pHeader->FC.Type == BTYPE_CNTL)
-		{
-			pAd->ate.OtherCount++;
-		}
-	}
-	pAd->ate.RSSI0 = pRxWI->RSSI0;
-	pAd->ate.RSSI1 = pRxWI->RSSI1;
-	pAd->ate.RSSI2 = pRxWI->RSSI2;
-	pAd->ate.SNR0 = pRxWI->SNR0;
-	pAd->ate.SNR1 = pRxWI->SNR1;
-}
-
-/* command id with Cmd Type == 0x0008(for 28xx)/0x0005(for iNIC) */
-#define RACFG_CMD_RF_WRITE_ALL		0x0000
-#define RACFG_CMD_E2PROM_READ16		0x0001
-#define RACFG_CMD_E2PROM_WRITE16	0x0002
-#define RACFG_CMD_E2PROM_READ_ALL	0x0003
-#define RACFG_CMD_E2PROM_WRITE_ALL	0x0004
-#define RACFG_CMD_IO_READ			0x0005
-#define RACFG_CMD_IO_WRITE			0x0006
-#define RACFG_CMD_IO_READ_BULK		0x0007
-#define RACFG_CMD_BBP_READ8			0x0008
-#define RACFG_CMD_BBP_WRITE8		0x0009
-#define RACFG_CMD_BBP_READ_ALL		0x000a
-#define RACFG_CMD_GET_COUNTER		0x000b
-#define RACFG_CMD_CLEAR_COUNTER		0x000c
-
-#define RACFG_CMD_RSV1				0x000d
-#define RACFG_CMD_RSV2				0x000e
-#define RACFG_CMD_RSV3				0x000f
-
-#define RACFG_CMD_TX_START			0x0010
-#define RACFG_CMD_GET_TX_STATUS		0x0011
-#define RACFG_CMD_TX_STOP			0x0012
-#define RACFG_CMD_RX_START			0x0013
-#define RACFG_CMD_RX_STOP			0x0014
-#define RACFG_CMD_GET_NOISE_LEVEL	0x0015
-
-#define RACFG_CMD_ATE_START			0x0080
-#define RACFG_CMD_ATE_STOP			0x0081
-
-#define RACFG_CMD_ATE_START_TX_CARRIER		0x0100
-#define RACFG_CMD_ATE_START_TX_CONT			0x0101
-#define RACFG_CMD_ATE_START_TX_FRAME		0x0102
-#define RACFG_CMD_ATE_SET_BW	            0x0103
-#define RACFG_CMD_ATE_SET_TX_POWER0	        0x0104
-#define RACFG_CMD_ATE_SET_TX_POWER1			0x0105
-#define RACFG_CMD_ATE_SET_FREQ_OFFSET		0x0106
-#define RACFG_CMD_ATE_GET_STATISTICS		0x0107
-#define RACFG_CMD_ATE_RESET_COUNTER			0x0108
-#define RACFG_CMD_ATE_SEL_TX_ANTENNA		0x0109
-#define RACFG_CMD_ATE_SEL_RX_ANTENNA		0x010a
-#define RACFG_CMD_ATE_SET_PREAMBLE			0x010b
-#define RACFG_CMD_ATE_SET_CHANNEL			0x010c
-#define RACFG_CMD_ATE_SET_ADDR1				0x010d
-#define RACFG_CMD_ATE_SET_ADDR2				0x010e
-#define RACFG_CMD_ATE_SET_ADDR3				0x010f
-#define RACFG_CMD_ATE_SET_RATE				0x0110
-#define RACFG_CMD_ATE_SET_TX_FRAME_LEN		0x0111
-#define RACFG_CMD_ATE_SET_TX_FRAME_COUNT	0x0112
-#define RACFG_CMD_ATE_START_RX_FRAME		0x0113
-#define RACFG_CMD_ATE_E2PROM_READ_BULK	0x0114
-#define RACFG_CMD_ATE_E2PROM_WRITE_BULK	0x0115
-#define RACFG_CMD_ATE_IO_WRITE_BULK		0x0116
-#define RACFG_CMD_ATE_BBP_READ_BULK		0x0117
-#define RACFG_CMD_ATE_BBP_WRITE_BULK	0x0118
-#define RACFG_CMD_ATE_RF_READ_BULK		0x0119
-#define RACFG_CMD_ATE_RF_WRITE_BULK		0x011a
-
-
-
-#define A2Hex(_X, _p) 				\
-{									\
-	UCHAR *p;						\
-	_X = 0;							\
-	p = _p;							\
-	while (((*p >= 'a') && (*p <= 'f')) || ((*p >= 'A') && (*p <= 'F')) || ((*p >= '0') && (*p <= '9')))		\
-	{												\
-		if ((*p >= 'a') && (*p <= 'f'))				\
-			_X = _X * 16 + *p - 87;					\
-		else if ((*p >= 'A') && (*p <= 'F'))		\
-			_X = _X * 16 + *p - 55;					\
-		else if ((*p >= '0') && (*p <= '9'))		\
-			_X = _X * 16 + *p - 48;					\
-		p++;										\
-	}												\
-}
-
-
-static VOID memcpy_exl(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len);
-static VOID memcpy_exs(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len);
-static VOID RTMP_IO_READ_BULK(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, UINT32 len);
-
-#ifdef UCOS
-int ate_copy_to_user(
-	IN PUCHAR payload,
-	IN PUCHAR msg,
-	IN INT    len)
-{
-	memmove(payload, msg, len);
-	return 0;
-}
-
-#undef	copy_to_user
-#define copy_to_user(x,y,z) ate_copy_to_user((PUCHAR)x, (PUCHAR)y, z)
-#endif // UCOS //
-
-#define	LEN_OF_ARG 16
-
-VOID RtmpDoAte(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq)
-{
-	unsigned short Command_Id;
-	struct ate_racfghdr *pRaCfg;
-	INT	Status = NDIS_STATUS_SUCCESS;
-
-
-
-	if((pRaCfg = kmalloc(sizeof(struct ate_racfghdr), GFP_KERNEL)) == NULL)
-	{
-		Status = -EINVAL;
-		return;
-	}
-
-	NdisZeroMemory(pRaCfg, sizeof(struct ate_racfghdr));
-
-    if (copy_from_user((PUCHAR)pRaCfg, wrq->u.data.pointer, wrq->u.data.length))
-	{
-		Status = -EFAULT;
-		kfree(pRaCfg);
-		return;
-	}
-
-
-	Command_Id = ntohs(pRaCfg->command_id);
-
-	ATEDBGPRINT(RT_DEBUG_TRACE,("\n%s: Command_Id = 0x%04x !\n", __func__, Command_Id));
-
-	switch (Command_Id)
-	{
- 		// We will get this command when QA starts.
-		case RACFG_CMD_ATE_START:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_START\n"));
-
-				// prepare feedback as soon as we can to avoid QA timeout.
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_TRACE, ("copy_to_user() fail in case RACFG_CMD_ATE_START\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_START is done !\n"));
-				}
-				Set_ATE_Proc(pAdapter, "ATESTART");
-			}
-			break;
-
- 		// We will get this command either QA is closed or ated is killed by user.
-		case RACFG_CMD_ATE_STOP:
-			{
-#ifndef UCOS
-				INT32 ret;
-#endif // !UCOS //
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_STOP\n"));
-
-				// Distinguish this command came from QA(via ated)
-				// or ate daemon according to the existence of pid in payload.
-				// No need to prepare feedback if this cmd came directly from ate daemon.
-				pRaCfg->length = ntohs(pRaCfg->length);
-
-				if (pRaCfg->length == sizeof(pAdapter->ate.AtePid))
-				{
-					// This command came from QA.
-					// Get the pid of ATE daemon.
-					memcpy((UCHAR *)&pAdapter->ate.AtePid,
-						(&pRaCfg->data[0]) - 2/* == &(pRaCfg->status) */,
-						sizeof(pAdapter->ate.AtePid));
-
-					// prepare feedback as soon as we can to avoid QA timeout.
-					pRaCfg->length = htons(2);
-					pRaCfg->status = htons(0);
-
-					wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-										+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-										+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-					ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
-	            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-	            	{
-	            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_STOP\n"));
-	                    Status = -EFAULT;
-	            	}
-
-					//
-					// kill ATE daemon when leaving ATE mode.
-					// We must kill ATE daemon first before setting ATESTOP,
-					// or Microsoft will report sth. wrong.
-#ifndef UCOS
-					ret = KILL_THREAD_PID(pAdapter->ate.AtePid, SIGTERM, 1);
-					if (ret)
-					{
-						ATEDBGPRINT(RT_DEBUG_ERROR, ("%s: unable to signal thread\n", pAdapter->net_dev->name));
-					}
-#endif // !UCOS //
-				}
-
-				// AP might have in ATE_STOP mode due to cmd from QA.
-				if (ATE_ON(pAdapter))
-				{
-					// Someone has killed ate daemon while QA GUI is still open.
-					Set_ATE_Proc(pAdapter, "ATESTOP");
-					ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_AP_START is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_RF_WRITE_ALL:
-			{
-				UINT32 R1, R2, R3, R4;
-				USHORT channel;
-
-				memcpy(&R1, pRaCfg->data-2, 4);
-				memcpy(&R2, pRaCfg->data+2, 4);
-				memcpy(&R3, pRaCfg->data+6, 4);
-				memcpy(&R4, pRaCfg->data+10, 4);
-				memcpy(&channel, pRaCfg->data+14, 2);
-
-				pAdapter->LatchRfRegs.R1 = ntohl(R1);
-				pAdapter->LatchRfRegs.R2 = ntohl(R2);
-				pAdapter->LatchRfRegs.R3 = ntohl(R3);
-				pAdapter->LatchRfRegs.R4 = ntohl(R4);
-				pAdapter->LatchRfRegs.Channel = ntohs(channel);
-
-				RTMP_RF_IO_WRITE32(pAdapter, pAdapter->LatchRfRegs.R1);
-				RTMP_RF_IO_WRITE32(pAdapter, pAdapter->LatchRfRegs.R2);
-				RTMP_RF_IO_WRITE32(pAdapter, pAdapter->LatchRfRegs.R3);
-				RTMP_RF_IO_WRITE32(pAdapter, pAdapter->LatchRfRegs.R4);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_RF_WRITE_ALL\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_RF_WRITE_ALL is done !\n"));
-				}
-			}
-            break;
-
-		case RACFG_CMD_E2PROM_READ16:
-			{
-				USHORT	offset, value, tmp;
-
-				offset = ntohs(pRaCfg->status);
-				/* "tmp" is expecially for some compilers... */
-				RT28xx_EEPROM_READ16(pAdapter, offset, tmp);
-				value = tmp;
-				value = htons(value);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("EEPROM Read offset = 0x%04x, value = 0x%04x\n", offset, value));
-
-				// prepare feedback
-				pRaCfg->length = htons(4);
-				pRaCfg->status = htons(0);
-				memcpy(pRaCfg->data, &value, 2);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("sizeof(struct ate_racfghdr) = %d\n", sizeof(struct ate_racfghdr)));
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_E2PROM_READ16\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_E2PROM_READ16 is done !\n"));
-				}
-           	}
-			break;
-
-		case RACFG_CMD_E2PROM_WRITE16:
-			{
-				USHORT	offset, value;
-
-				offset = ntohs(pRaCfg->status);
-				memcpy(&value, pRaCfg->data, 2);
-				value = ntohs(value);
-				RT28xx_EEPROM_WRITE16(pAdapter, offset, value);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_E2PROM_WRITE16\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_E2PROM_WRITE16 is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_E2PROM_READ_ALL:
-			{
-				USHORT buffer[EEPROM_SIZE/2];
-
-				rt_ee_read_all(pAdapter,(USHORT *)buffer);
-				memcpy_exs(pAdapter, pRaCfg->data, (UCHAR *)buffer, EEPROM_SIZE);
-
-				// prepare feedback
-				pRaCfg->length = htons(2+EEPROM_SIZE);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_E2PROM_READ_ALL\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_E2PROM_READ_ALL is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_E2PROM_WRITE_ALL:
-			{
-				USHORT buffer[EEPROM_SIZE/2];
-
-				NdisZeroMemory((UCHAR *)buffer, EEPROM_SIZE);
-				memcpy_exs(pAdapter, (UCHAR *)buffer, (UCHAR *)&pRaCfg->status, EEPROM_SIZE);
-				rt_ee_write_all(pAdapter,(USHORT *)buffer);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_E2PROM_WRITE_ALL\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_ERROR, ("RACFG_CMD_E2PROM_WRITE_ALL is done !\n"));
-				}
-
-			}
-			break;
-
-		case RACFG_CMD_IO_READ:
-			{
-				UINT32	offset;
-				UINT32	value;
-
-				memcpy(&offset, &pRaCfg->status, 4);
-				offset = ntohl(offset);
-
-				// We do not need the base address.
-				// So just extract the offset out.
-				offset &= 0x0000FFFF;
-				RTMP_IO_READ32(pAdapter, offset, &value);
-				value = htonl(value);
-
-				// prepare feedback
-				pRaCfg->length = htons(6);
-				pRaCfg->status = htons(0);
-				memcpy(pRaCfg->data, &value, 4);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_IO_READ\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_IO_READ is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_IO_WRITE:
-			{
-				UINT32	offset, value;
-
-				memcpy(&offset, pRaCfg->data-2, 4);
-				memcpy(&value, pRaCfg->data+2, 4);
-
-				offset = ntohl(offset);
-
-				// We do not need the base address.
-				// So just extract out the offset.
-				offset &= 0x0000FFFF;
-				value = ntohl(value);
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_IO_WRITE: offset = %x, value = %x\n", offset, value));
-				RTMP_IO_WRITE32(pAdapter, offset, value);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_IO_WRITE\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_IO_WRITE is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_IO_READ_BULK:
-			{
-				UINT32	offset;
-				USHORT	len;
-
-				memcpy(&offset, &pRaCfg->status, 4);
-				offset = ntohl(offset);
-
-				// We do not need the base address.
-				// So just extract the offset.
-				offset &= 0x0000FFFF;
-				memcpy(&len, pRaCfg->data+2, 2);
-				len = ntohs(len);
-
-				if (len > 371)
-				{
-					ATEDBGPRINT(RT_DEBUG_TRACE,("len is too large, make it smaller\n"));
-					pRaCfg->length = htons(2);
-					pRaCfg->status = htons(1);
-					break;
-				}
-
-				RTMP_IO_READ_BULK(pAdapter, pRaCfg->data, (UCHAR *)offset, len*4);// unit in four bytes
-
-				// prepare feedback
-				pRaCfg->length = htons(2+len*4);// unit in four bytes
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_IO_READ_BULK\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_IO_READ_BULK is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_BBP_READ8:
-			{
-				USHORT	offset;
-				UCHAR	value;
-
-				value = 0;
-				offset = ntohs(pRaCfg->status);
-
-				if (ATE_ON(pAdapter))
-				{
-					ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, offset,  &value);
-				}
-				else
-				{
-					RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, offset,  &value);
-				}
-				// prepare feedback
-				pRaCfg->length = htons(3);
-				pRaCfg->status = htons(0);
-				pRaCfg->data[0] = value;
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("BBP value = %x\n", value));
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_BBP_READ8\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_BBP_READ8 is done !\n"));
-				}
-			}
-			break;
-		case RACFG_CMD_BBP_WRITE8:
-			{
-				USHORT	offset;
-				UCHAR	value;
-
-				offset = ntohs(pRaCfg->status);
-				memcpy(&value, pRaCfg->data, 1);
-
-				if (ATE_ON(pAdapter))
-				{
-					ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, offset,  value);
-				}
-				else
-				{
-					RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, offset,  value);
-				}
-
-				if ((offset == BBP_R1) || (offset == BBP_R3))
-				{
-					SyncTxRxConfig(pAdapter, offset, value);
-				}
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_BBP_WRITE8\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_BBP_WRITE8 is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_BBP_READ_ALL:
-			{
-				USHORT j;
-
-				for (j = 0; j < 137; j++)
-				{
-					pRaCfg->data[j] = 0;
-
-					if (ATE_ON(pAdapter))
-					{
-						ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, j,  &pRaCfg->data[j]);
-					}
-					else
-					{
-						RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, j,  &pRaCfg->data[j]);
-					}
-				}
-
-				// prepare feedback
-				pRaCfg->length = htons(2+137);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_BBP_READ_ALL\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_BBP_READ_ALL is done !\n"));
-				}
-			}
-
-			break;
-
-		case RACFG_CMD_ATE_E2PROM_READ_BULK:
-		{
-			USHORT offset;
-			USHORT len;
-			USHORT buffer[EEPROM_SIZE/2];
-
-			offset = ntohs(pRaCfg->status);
-			memcpy(&len, pRaCfg->data, 2);
-			len = ntohs(len);
-
-			rt_ee_read_all(pAdapter,(USHORT *)buffer);
-			if (offset + len <= EEPROM_SIZE)
-				memcpy_exs(pAdapter, pRaCfg->data, (UCHAR *)buffer+offset, len);
-			else
-				ATEDBGPRINT(RT_DEBUG_ERROR, ("exceed EEPROM size\n"));
-
-			// prepare feedback
-			pRaCfg->length = htons(2+len);
-			pRaCfg->status = htons(0);
-			wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            {
-            	ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_E2PROM_READ_BULK\n"));
-                Status = -EFAULT;
-            }
-			else
-			{
-               	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_E2PROM_READ_BULK is done !\n"));
-			}
-
-		}
-			break;
-
-		case RACFG_CMD_ATE_E2PROM_WRITE_BULK:
-		{
-			USHORT offset;
-			USHORT len;
-			USHORT buffer[EEPROM_SIZE/2];
-
-			offset = ntohs(pRaCfg->status);
-			memcpy(&len, pRaCfg->data, 2);
-			len = ntohs(len);
-
-			rt_ee_read_all(pAdapter,(USHORT *)buffer);
-			memcpy_exs(pAdapter, (UCHAR *)buffer + offset, (UCHAR *)pRaCfg->data + 2, len);
-			rt_ee_write_all(pAdapter,(USHORT *)buffer);
-
-			// prepare feedback
-			pRaCfg->length = htons(2);
-			pRaCfg->status = htons(0);
-			wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-								+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-								+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-            if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            {
-            	ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_E2PROM_WRITE_BULK\n"));
-                   Status = -EFAULT;
-            }
-			else
-			{
-               	ATEDBGPRINT(RT_DEBUG_ERROR, ("RACFG_CMD_ATE_E2PROM_WRITE_BULK is done !\n"));
-			}
-
-		}
-			break;
-
-		case RACFG_CMD_ATE_IO_WRITE_BULK:
-		{
-			UINT32 offset, i, value;
-			USHORT len;
-
-			memcpy(&offset, &pRaCfg->status, 4);
-			offset = ntohl(offset);
-			memcpy(&len, pRaCfg->data+2, 2);
-			len = ntohs(len);
-
-			for (i = 0; i < len; i += 4)
-			{
-				memcpy_exl(pAdapter, (UCHAR *)&value, pRaCfg->data+4+i, 4);
-				printk("Write %x %x\n", offset + i, value);
-				RTMP_IO_WRITE32(pAdapter, (offset +i) & 0xffff, value);
-			}
-
-			// prepare feedback
-			pRaCfg->length = htons(2);
-			pRaCfg->status = htons(0);
-			wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-								+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-								+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-            if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            {
-            	ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_IO_WRITE_BULK\n"));
-                   Status = -EFAULT;
-            }
-			else
-			{
-               	ATEDBGPRINT(RT_DEBUG_ERROR, ("RACFG_CMD_ATE_IO_WRITE_BULK is done !\n"));
-			}
-
-		}
-			break;
-
-		case RACFG_CMD_ATE_BBP_READ_BULK:
-		{
-			USHORT offset;
-			USHORT len;
-			USHORT j;
-
-			offset = ntohs(pRaCfg->status);
-			memcpy(&len, pRaCfg->data, 2);
-			len = ntohs(len);
-
-
-			for (j = offset; j < (offset+len); j++)
-			{
-				pRaCfg->data[j - offset] = 0;
-
-				if (pAdapter->ate.Mode == ATE_STOP)
-				{
-					RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, j,  &pRaCfg->data[j - offset]);
-				}
-				else
-				{
-					ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, j,  &pRaCfg->data[j - offset]);
-				}
-			}
-
-			// prepare feedback
-			pRaCfg->length = htons(2+len);
-			pRaCfg->status = htons(0);
-			wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-								+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-								+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            {
-            	ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_BBP_READ_BULK\n"));
-                   Status = -EFAULT;
-            }
-			else
-			{
-               	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_BBP_READ_BULK is done !\n"));
-			}
-
-		}
-			break;
-
-		case RACFG_CMD_ATE_BBP_WRITE_BULK:
-		{
-			USHORT offset;
-			USHORT len;
-			USHORT j;
-			UCHAR *value;
-
-			offset = ntohs(pRaCfg->status);
-			memcpy(&len, pRaCfg->data, 2);
-			len = ntohs(len);
-
-			for (j = offset; j < (offset+len); j++)
-			{
-				value = pRaCfg->data + 2 + (j - offset);
-				if (pAdapter->ate.Mode == ATE_STOP)
-				{
-					RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, j,  *value);
-				}
-				else
-				{
-					ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, j,  *value);
-				}
-			}
-
-			// prepare feedback
-			pRaCfg->length = htons(2);
-			pRaCfg->status = htons(0);
-			wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-								+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-								+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            {
-            	ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_BBP_WRITE_BULK\n"));
-                   Status = -EFAULT;
-            }
-			else
-			{
-               	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_BBP_WRITE_BULK is done !\n"));
-			}
-		}
-			break;
-
-#ifdef CONFIG_RALINK_RT3052
-		case RACFG_CMD_ATE_RF_READ_BULK:
-		{
-			USHORT offset;
-			USHORT len;
-			USHORT j;
-
-			offset = ntohs(pRaCfg->status);
-			memcpy(&len, pRaCfg->data, 2);
-			len = ntohs(len);
-
-			for (j = offset; j < (offset+len); j++)
-			{
-				pRaCfg->data[j - offset] = 0;
-				RT30xxReadRFRegister(pAdapter, j,  &pRaCfg->data[j - offset]);
-			}
-
-			// prepare feedback
-			pRaCfg->length = htons(2+len);
-			pRaCfg->status = htons(0);
-			wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-								+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-								+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            {
-            	ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_RF_READ_BULK\n"));
-                   Status = -EFAULT;
-            }
-			else
-			{
-               	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_RF_READ_BULK is done !\n"));
-			}
-
-		}
-			break;
-
-		case RACFG_CMD_ATE_RF_WRITE_BULK:
-		{
-			USHORT offset;
-			USHORT len;
-			USHORT j;
-			UCHAR *value;
-
-			offset = ntohs(pRaCfg->status);
-			memcpy(&len, pRaCfg->data, 2);
-			len = ntohs(len);
-
-			for (j = offset; j < (offset+len); j++)
-			{
-				value = pRaCfg->data + 2 + (j - offset);
-				RT30xxWriteRFRegister(pAdapter, j,  *value);
-			}
-
-			// prepare feedback
-			pRaCfg->length = htons(2);
-			pRaCfg->status = htons(0);
-			wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-								+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-								+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            {
-            	ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_RF_WRITE_BULK\n"));
-                   Status = -EFAULT;
-            }
-			else
-			{
-               	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_RF_WRITE_BULK is done !\n"));
-			}
-
-		}
-			break;
-#endif
-
-
-		case RACFG_CMD_GET_NOISE_LEVEL:
-			{
-				UCHAR	channel;
-				INT32   buffer[3][10];/* 3 : RxPath ; 10 : no. of per rssi samples */
-
-				channel = (ntohs(pRaCfg->status) & 0x00FF);
-				CalNoiseLevel(pAdapter, channel, buffer);
-				memcpy_exl(pAdapter, (UCHAR *)pRaCfg->data, (UCHAR *)&(buffer[0][0]), (sizeof(INT32)*3*10));
-
-				// prepare feedback
-				pRaCfg->length = htons(2 + (sizeof(INT32)*3*10));
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_GET_NOISE_LEVEL\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_GET_NOISE_LEVEL is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_GET_COUNTER:
-			{
-				memcpy_exl(pAdapter, &pRaCfg->data[0], (UCHAR *)&pAdapter->ate.U2M, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[4], (UCHAR *)&pAdapter->ate.OtherData, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[8], (UCHAR *)&pAdapter->ate.Beacon, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[12], (UCHAR *)&pAdapter->ate.OtherCount, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[16], (UCHAR *)&pAdapter->ate.TxAc0, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[20], (UCHAR *)&pAdapter->ate.TxAc1, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[24], (UCHAR *)&pAdapter->ate.TxAc2, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[28], (UCHAR *)&pAdapter->ate.TxAc3, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[32], (UCHAR *)&pAdapter->ate.TxHCCA, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[36], (UCHAR *)&pAdapter->ate.TxMgmt, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[40], (UCHAR *)&pAdapter->ate.RSSI0, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[44], (UCHAR *)&pAdapter->ate.RSSI1, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[48], (UCHAR *)&pAdapter->ate.RSSI2, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[52], (UCHAR *)&pAdapter->ate.SNR0, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[56], (UCHAR *)&pAdapter->ate.SNR1, 4);
-
-				pRaCfg->length = htons(2+60);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_GET_COUNTER\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_GET_COUNTER is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_CLEAR_COUNTER:
-			{
-				pAdapter->ate.U2M = 0;
-				pAdapter->ate.OtherData = 0;
-				pAdapter->ate.Beacon = 0;
-				pAdapter->ate.OtherCount = 0;
-				pAdapter->ate.TxAc0 = 0;
-				pAdapter->ate.TxAc1 = 0;
-				pAdapter->ate.TxAc2 = 0;
-				pAdapter->ate.TxAc3 = 0;
-				pAdapter->ate.TxHCCA = 0;
-				pAdapter->ate.TxMgmt = 0;
-				pAdapter->ate.TxDoneCount = 0;
-
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_CLEAR_COUNTER\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_CLEAR_COUNTER is done !\n"));
-				}
-			}
-
-			break;
-
-		case RACFG_CMD_TX_START:
-			{
-				USHORT *p;
-				USHORT	err = 1;
-				UCHAR   Bbp22Value = 0, Bbp24Value = 0;
-
-				if ((pAdapter->ate.TxStatus != 0) && (pAdapter->ate.Mode & ATE_TXFRAME))
-				{
-					ATEDBGPRINT(RT_DEBUG_TRACE,("Ate Tx is already running, to run next Tx, you must stop it first\n"));
-					err = 2;
-					goto TX_START_ERROR;
-				}
-				else if ((pAdapter->ate.TxStatus != 0) && !(pAdapter->ate.Mode & ATE_TXFRAME))
-				{
-					int i = 0;
-
-					while ((i++ < 10) && (pAdapter->ate.TxStatus != 0))
-					{
-						RTMPusecDelay(5000);
-					}
-
-					// force it to stop
-					pAdapter->ate.TxStatus = 0;
-					pAdapter->ate.TxDoneCount = 0;
-					//pAdapter->ate.Repeat = 0;
-					pAdapter->ate.bQATxStart = FALSE;
-				}
-
-				// If pRaCfg->length == 0, this "RACFG_CMD_TX_START" is for Carrier test or Carrier Suppression.
-				if (ntohs(pRaCfg->length) != 0)
-				{
-					// Get frame info
-#ifdef RT2870
-					NdisMoveMemory(&pAdapter->ate.TxInfo, pRaCfg->data - 2, 4);
-#ifdef RT_BIG_ENDIAN
-					RTMPDescriptorEndianChange((PUCHAR) &pAdapter->ate.TxInfo, TYPE_TXINFO);
-#endif // RT_BIG_ENDIAN //
-#endif // RT2870 //
-
-					NdisMoveMemory(&pAdapter->ate.TxWI, pRaCfg->data + 2, 16);
-#ifdef RT_BIG_ENDIAN
-					RTMPWIEndianChange((PUCHAR)&pAdapter->ate.TxWI, TYPE_TXWI);
-#endif // RT_BIG_ENDIAN //
-
-					NdisMoveMemory(&pAdapter->ate.TxCount, pRaCfg->data + 18, 4);
-					pAdapter->ate.TxCount = ntohl(pAdapter->ate.TxCount);
-
-					p = (USHORT *)(&pRaCfg->data[22]);
-					//p = pRaCfg->data + 22;
-					// always use QID_AC_BE
-					pAdapter->ate.QID = 0;
-					p = (USHORT *)(&pRaCfg->data[24]);
-					//p = pRaCfg->data + 24;
-					pAdapter->ate.HLen = ntohs(*p);
-
-					if (pAdapter->ate.HLen > 32)
-					{
-						ATEDBGPRINT(RT_DEBUG_ERROR,("pAdapter->ate.HLen > 32\n"));
-						err = 3;
-						goto TX_START_ERROR;
-					}
-
-					NdisMoveMemory(&pAdapter->ate.Header, pRaCfg->data + 26, pAdapter->ate.HLen);
-
-
-					pAdapter->ate.PLen = ntohs(pRaCfg->length) - (pAdapter->ate.HLen + 28);
-
-					if (pAdapter->ate.PLen > 32)
-					{
-						ATEDBGPRINT(RT_DEBUG_ERROR,("pAdapter->ate.PLen > 32\n"));
-						err = 4;
-						goto TX_START_ERROR;
-					}
-
-					NdisMoveMemory(&pAdapter->ate.Pattern, pRaCfg->data + 26 + pAdapter->ate.HLen, pAdapter->ate.PLen);
-					pAdapter->ate.DLen = pAdapter->ate.TxWI.MPDUtotalByteCount - pAdapter->ate.HLen;
-				}
-
-				ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R22, &Bbp22Value);
-
-				switch (Bbp22Value)
-				{
-					case BBP22_TXFRAME:
-						{
-							if (pAdapter->ate.TxCount == 0)
-							{
-							}
-							ATEDBGPRINT(RT_DEBUG_TRACE,("START TXFRAME\n"));
-							pAdapter->ate.bQATxStart = TRUE;
-							Set_ATE_Proc(pAdapter, "TXFRAME");
-						}
-						break;
-
-					case BBP22_TXCONT_OR_CARRSUPP:
-						{
-							ATEDBGPRINT(RT_DEBUG_TRACE,("BBP22_TXCONT_OR_CARRSUPP\n"));
-							ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, 24, &Bbp24Value);
-
-							switch (Bbp24Value)
-							{
-								case BBP24_TXCONT:
-									{
-										ATEDBGPRINT(RT_DEBUG_TRACE,("START TXCONT\n"));
-										pAdapter->ate.bQATxStart = TRUE;
-										Set_ATE_Proc(pAdapter, "TXCONT");
-									}
-									break;
-
-								case BBP24_CARRSUPP:
-									{
-										ATEDBGPRINT(RT_DEBUG_TRACE,("START TXCARRSUPP\n"));
-										pAdapter->ate.bQATxStart = TRUE;
-										pAdapter->ate.Mode |= ATE_TXCARRSUPP;
-									}
-									break;
-
-								default:
-									{
-										ATEDBGPRINT(RT_DEBUG_ERROR,("Unknown Start TX subtype !"));
-									}
-									break;
-							}
-						}
-						break;
-
-					case BBP22_TXCARR:
-						{
-							ATEDBGPRINT(RT_DEBUG_TRACE,("START TXCARR\n"));
-							pAdapter->ate.bQATxStart = TRUE;
-							Set_ATE_Proc(pAdapter, "TXCARR");
-						}
-						break;
-
-					default:
-						{
-							ATEDBGPRINT(RT_DEBUG_ERROR,("Unknown Start TX subtype !"));
-						}
-						break;
-				}
-
-				if (pAdapter->ate.bQATxStart == TRUE)
-				{
-					// prepare feedback
-					pRaCfg->length = htons(2);
-					pRaCfg->status = htons(0);
-
-					wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-										+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-										+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-	            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-	            	{
-	            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() was failed in case RACFG_CMD_TX_START\n"));
-	                    Status = -EFAULT;
-	            	}
-					else
-					{
-	                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_TX_START is done !\n"));
-					}
-					break;
-				}
-
-TX_START_ERROR:
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(err);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_TX_START\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("feedback of TX_START_ERROR is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_GET_TX_STATUS:
-			{
-				UINT32 count;
-
-				// prepare feedback
-				pRaCfg->length = htons(6);
-				pRaCfg->status = htons(0);
-				count = htonl(pAdapter->ate.TxDoneCount);
-				NdisMoveMemory(pRaCfg->data, &count, 4);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_GET_TX_STATUS\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_GET_TX_STATUS is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_TX_STOP:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_TX_STOP\n"));
-
-				Set_ATE_Proc(pAdapter, "TXSTOP");
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_TRACE, ("copy_to_user() fail in case RACFG_CMD_TX_STOP\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_TX_STOP is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_RX_START:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_RX_START\n"));
-
-				pAdapter->ate.bQARxStart = TRUE;
-				Set_ATE_Proc(pAdapter, "RXFRAME");
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_RX_START\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_RX_START is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_RX_STOP:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_RX_STOP\n"));
-
-				Set_ATE_Proc(pAdapter, "RXSTOP");
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_RX_STOP\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_RX_STOP is done !\n"));
-				}
-			}
-			break;
-
-		/* The following cases are for new ATE GUI(not QA). */
-		/*==================================================*/
-		case RACFG_CMD_ATE_START_TX_CARRIER:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_START_TX_CARRIER\n"));
-
-				Set_ATE_Proc(pAdapter, "TXCARR");
-
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_START_TX_CARRIER\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_START_TX_CARRIER is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_START_TX_CONT:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_START_TX_CONT\n"));
-
-				Set_ATE_Proc(pAdapter, "TXCONT");
-
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_START_TX_CONT\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_START_TX_CONT is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_START_TX_FRAME:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_START_TX_FRAME\n"));
-
-				Set_ATE_Proc(pAdapter, "TXFRAME");
-
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_START_TX_FRAME\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_START_TX_FRAME is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_BW:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_BW\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-
-				Set_ATE_TX_BW_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_BW\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_BW is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_TX_POWER0:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_TX_POWER0\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_TX_POWER0_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_TX_POWER0\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_TX_POWER0 is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_TX_POWER1:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_TX_POWER1\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_TX_POWER1_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_TX_POWER1\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_TX_POWER1 is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_FREQ_OFFSET:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_FREQ_OFFSET\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_TX_FREQOFFSET_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_FREQ_OFFSET\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_FREQ_OFFSET is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_GET_STATISTICS:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_GET_STATISTICS\n"));
-
-				memcpy_exl(pAdapter, &pRaCfg->data[0], (UCHAR *)&pAdapter->ate.TxDoneCount, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[4], (UCHAR *)&pAdapter->WlanCounters.RetryCount.u.LowPart, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[8], (UCHAR *)&pAdapter->WlanCounters.FailedCount.u.LowPart, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[12], (UCHAR *)&pAdapter->WlanCounters.RTSSuccessCount.u.LowPart, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[16], (UCHAR *)&pAdapter->WlanCounters.RTSFailureCount.u.LowPart, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[20], (UCHAR *)&pAdapter->WlanCounters.ReceivedFragmentCount.QuadPart, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[24], (UCHAR *)&pAdapter->WlanCounters.FCSErrorCount.u.LowPart, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[28], (UCHAR *)&pAdapter->Counters8023.RxNoBuffer, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[32], (UCHAR *)&pAdapter->WlanCounters.FrameDuplicateCount.u.LowPart, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[36], (UCHAR *)&pAdapter->RalinkCounters.OneSecFalseCCACnt, 4);
-
-				if (pAdapter->ate.RxAntennaSel == 0)
-				{
-					INT32 RSSI0 = 0;
-					INT32 RSSI1 = 0;
-					INT32 RSSI2 = 0;
-
-					RSSI0 = (INT32)(pAdapter->ate.LastRssi0 - pAdapter->BbpRssiToDbmDelta);
-					RSSI1 = (INT32)(pAdapter->ate.LastRssi1 - pAdapter->BbpRssiToDbmDelta);
-					RSSI2 = (INT32)(pAdapter->ate.LastRssi2 - pAdapter->BbpRssiToDbmDelta);
-					memcpy_exl(pAdapter, &pRaCfg->data[40], (UCHAR *)&RSSI0, 4);
-					memcpy_exl(pAdapter, &pRaCfg->data[44], (UCHAR *)&RSSI1, 4);
-					memcpy_exl(pAdapter, &pRaCfg->data[48], (UCHAR *)&RSSI2, 4);
-					pRaCfg->length = htons(2+52);
-				}
-				else
-				{
-					INT32 RSSI0 = 0;
-
-					RSSI0 = (INT32)(pAdapter->ate.LastRssi0 - pAdapter->BbpRssiToDbmDelta);
-					memcpy_exl(pAdapter, &pRaCfg->data[40], (UCHAR *)&RSSI0, 4);
-					pRaCfg->length = htons(2+44);
-				}
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_GET_STATISTICS\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_GET_STATISTICS is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_RESET_COUNTER:
-			{
-				SHORT    value = 1;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_RESET_COUNTER\n"));
-
-				sprintf((PCHAR)str, "%d", value);
-				Set_ResetStatCounter_Proc(pAdapter, str);
-
-				pAdapter->ate.TxDoneCount = 0;
-
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_RESET_COUNTER\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_RESET_COUNTER is done !\n"));
-				}
-			}
-
-			break;
-
-		case RACFG_CMD_ATE_SEL_TX_ANTENNA:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SEL_TX_ANTENNA\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_TX_Antenna_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SEL_TX_ANTENNA\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SEL_TX_ANTENNA is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SEL_RX_ANTENNA:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SEL_RX_ANTENNA\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_RX_Antenna_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SEL_RX_ANTENNA\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SEL_RX_ANTENNA is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_PREAMBLE:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_PREAMBLE\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_TX_MODE_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_PREAMBLE\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_PREAMBLE is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_CHANNEL:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_CHANNEL\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_CHANNEL_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_CHANNEL\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_CHANNEL is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_ADDR1:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_ADDR1\n"));
-
-				// Addr is an array of UCHAR,
-				// so no need to perform endian swap.
-				memcpy(pAdapter->ate.Addr1, (PUCHAR)(pRaCfg->data - 2), MAC_ADDR_LEN);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_ADDR1\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-					ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_ADDR1 is done !\n (ADDR1 = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAdapter->ate.Addr1[0],
-						pAdapter->ate.Addr1[1], pAdapter->ate.Addr1[2], pAdapter->ate.Addr1[3], pAdapter->ate.Addr1[4], pAdapter->ate.Addr1[5]));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_ADDR2:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_ADDR2\n"));
-
-				// Addr is an array of UCHAR,
-				// so no need to perform endian swap.
-				memcpy(pAdapter->ate.Addr2, (PUCHAR)(pRaCfg->data - 2), MAC_ADDR_LEN);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_ADDR2\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-					ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_ADDR2 is done !\n (ADDR2 = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAdapter->ate.Addr2[0],
-						pAdapter->ate.Addr2[1], pAdapter->ate.Addr2[2], pAdapter->ate.Addr2[3], pAdapter->ate.Addr2[4], pAdapter->ate.Addr2[5]));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_ADDR3:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_ADDR3\n"));
-
-				// Addr is an array of UCHAR,
-				// so no need to perform endian swap.
-				memcpy(pAdapter->ate.Addr3, (PUCHAR)(pRaCfg->data - 2), MAC_ADDR_LEN);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_ADDR3\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-					ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_ADDR3 is done !\n (ADDR3 = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAdapter->ate.Addr3[0],
-						pAdapter->ate.Addr3[1], pAdapter->ate.Addr3[2], pAdapter->ate.Addr3[3], pAdapter->ate.Addr3[4], pAdapter->ate.Addr3[5]));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_RATE:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_RATE\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_TX_MCS_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_RATE\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_RATE is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_TX_FRAME_LEN:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_TX_FRAME_LEN\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_TX_LENGTH_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_TX_FRAME_LEN\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_TX_FRAME_LEN is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_TX_FRAME_COUNT:
-			{
-				USHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_TX_FRAME_COUNT\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				{
-					sprintf((PCHAR)str, "%d", value);
-					Set_ATE_TX_COUNT_Proc(pAdapter, str);
-				}
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_TX_FRAME_COUNT\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_TX_FRAME_COUNT is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_START_RX_FRAME:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_RX_START\n"));
-
-				Set_ATE_Proc(pAdapter, "RXFRAME");
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_RX_START\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_RX_START is done !\n"));
-				}
-			}
-			break;
-		default:
-			break;
-	}
-    ASSERT(pRaCfg != NULL);
-    if (pRaCfg != NULL)
-    {
-    kfree(pRaCfg);
-    }
-	return;
-}
-
-VOID BubbleSort(INT32 n, INT32 a[])
-{
-	INT32 k, j, temp;
-
-	for (k = n-1;  k>0;  k--)
-	{
-		for (j = 0; j<k; j++)
-		{
-			if(a[j] > a[j+1])
-			{
-				temp = a[j];
-				a[j]=a[j+1];
-				a[j+1]=temp;
-			}
-		}
-	}
-}
-
-VOID CalNoiseLevel(PRTMP_ADAPTER pAd, UCHAR channel, INT32 RSSI[3][10])
-{
-	INT32		RSSI0, RSSI1, RSSI2;
- 	CHAR		Rssi0Offset, Rssi1Offset, Rssi2Offset;
-	UCHAR		BbpR50Rssi0 = 0, BbpR51Rssi1 = 0, BbpR52Rssi2 = 0;
-	UCHAR		Org_BBP66value = 0, Org_BBP69value = 0, Org_BBP70value = 0, data = 0;
-	USHORT		LNA_Gain = 0;
-	INT32       j = 0;
-	UCHAR		Org_Channel = pAd->ate.Channel;
-	USHORT	    GainValue = 0, OffsetValue = 0;
-
-	ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66, &Org_BBP66value);
-	ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R69, &Org_BBP69value);
-	ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R70, &Org_BBP70value);
-
-	//**********************************************************************
-	// Read the value of LNA gain and Rssi offset
-	//**********************************************************************
-	RT28xx_EEPROM_READ16(pAd, EEPROM_LNA_OFFSET, GainValue);
-
-	// for Noise Level
-	if (channel <= 14)
-	{
-		LNA_Gain = GainValue & 0x00FF;
-
-		RT28xx_EEPROM_READ16(pAd, EEPROM_RSSI_BG_OFFSET, OffsetValue);
-		Rssi0Offset = OffsetValue & 0x00FF;
-		Rssi1Offset = (OffsetValue & 0xFF00) >> 8;
-		RT28xx_EEPROM_READ16(pAd, (EEPROM_RSSI_BG_OFFSET + 2)/* 0x48 */, OffsetValue);
-		Rssi2Offset = OffsetValue & 0x00FF;
-	}
-	else
-	{
-		LNA_Gain = (GainValue & 0xFF00) >> 8;
-
-		RT28xx_EEPROM_READ16(pAd, EEPROM_RSSI_A_OFFSET, OffsetValue);
-		Rssi0Offset = OffsetValue & 0x00FF;
-		Rssi1Offset = (OffsetValue & 0xFF00) >> 8;
-		RT28xx_EEPROM_READ16(pAd, (EEPROM_RSSI_A_OFFSET + 2)/* 0x4C */, OffsetValue);
-		Rssi2Offset = OffsetValue & 0x00FF;
-	}
-	//**********************************************************************
-	{
-		pAd->ate.Channel = channel;
-		ATEAsicSwitchChannel(pAd);
-		mdelay(5);
-
-		data = 0x10;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, data);
-		data = 0x40;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, data);
-		data = 0x40;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, data);
-		mdelay(5);
-
-		// Start Rx
-		pAd->ate.bQARxStart = TRUE;
-		Set_ATE_Proc(pAd, "RXFRAME");
-
-		mdelay(5);
-
-		for (j = 0; j < 10; j++)
-		{
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R50, &BbpR50Rssi0);
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R51, &BbpR51Rssi1);
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R52, &BbpR52Rssi2);
-
-			mdelay(10);
-
-			// Calculate RSSI 0
-			if (BbpR50Rssi0 == 0)
-			{
-				RSSI0 = -100;
-			}
-			else
-			{
-				RSSI0 = (INT32)(-12 - BbpR50Rssi0 - LNA_Gain - Rssi0Offset);
-			}
-			RSSI[0][j] = RSSI0;
-
-			if ( pAd->Antenna.field.RxPath >= 2 ) // 2R
-			{
-				// Calculate RSSI 1
-				if (BbpR51Rssi1 == 0)
-				{
-					RSSI1 = -100;
-				}
-				else
-				{
-					RSSI1 = (INT32)(-12 - BbpR51Rssi1 - LNA_Gain - Rssi1Offset);
-				}
-				RSSI[1][j] = RSSI1;
-			}
-
-			if ( pAd->Antenna.field.RxPath >= 3 ) // 3R
-			{
-				// Calculate RSSI 2
-				if (BbpR52Rssi2 == 0)
-					RSSI2 = -100;
-				else
-					RSSI2 = (INT32)(-12 - BbpR52Rssi2 - LNA_Gain - Rssi2Offset);
-
-				RSSI[2][j] = RSSI2;
-			}
-		}
-
-		// Stop Rx
-		Set_ATE_Proc(pAd, "RXSTOP");
-
-		mdelay(5);
-
-#if 0// Debug Message................
-		ate_print("\n**********************************************************\n");
-		ate_print("Noise Level: Channel %d\n", channel);
-		ate_print("RSSI0 = %d, %d, %d, %d, %d, %d, %d, %d, %d, %d\n",
-			RSSI[0][0], RSSI[0][1], RSSI[0][2],
-			RSSI[0][3], RSSI[0][4], RSSI[0][5],
-			RSSI[0][6], RSSI[0][7], RSSI[0][8],
-			RSSI[0][9]);
-		if ( pAd->Antenna.field.RxPath >= 2 ) // 2R
-		{
-			ate_print("RSSI1 = %d, %d, %d, %d, %d, %d, %d, %d, %d, %d\n",
-				RSSI[1][0], RSSI[1][1], RSSI[1][2],
-				RSSI[1][3], RSSI[1][4], RSSI[1][5],
-				RSSI[1][6], RSSI[1][7], RSSI[1][8],
-				RSSI[1][9]);
-		}
-		if ( pAd->Antenna.field.RxPath >= 3 ) // 3R
-		{
-			ate_print("RSSI2 = %d, %d, %d, %d, %d, %d, %d, %d, %d, %d\n",
-				RSSI[2][0], RSSI[2][1], RSSI[2][2],
-				RSSI[2][3], RSSI[2][4], RSSI[2][5],
-				RSSI[2][6], RSSI[2][7], RSSI[2][8],
-				RSSI[2][9]);
-		}
-#endif // 0 //
-		BubbleSort(10, RSSI[0]);	// 1R
-
-		if ( pAd->Antenna.field.RxPath >= 2 ) // 2R
-		{
-			BubbleSort(10, RSSI[1]);
-		}
-
-		if ( pAd->Antenna.field.RxPath >= 3 ) // 3R
-		{
-			BubbleSort(10, RSSI[2]);
-		}
-
-#if 0// Debug Message................
-		ate_print("\nAfter Sorting....Channel %d\n", channel);
-		ate_print("RSSI0 = %d, %d, %d, %d, %d, %d, %d, %d, %d, %d\n",
-			RSSI[0][0], RSSI[0][1], RSSI[0][2],
-			RSSI[0][3], RSSI[0][4], RSSI[0][5],
-			RSSI[0][6], RSSI[0][7], RSSI[0][8],
-			RSSI[0][9]);
-		if ( pAd->Antenna.field.RxPath >= 2 ) // 2R
-		{
-			ate_print("RSSI1 = %d, %d, %d, %d, %d, %d, %d, %d, %d, %d\n",
-				RSSI[1][0], RSSI[1][1], RSSI[1][2],
-				RSSI[1][3], RSSI[1][4], RSSI[1][5],
-				RSSI[1][6], RSSI[1][7], RSSI[1][8],
-				RSSI[1][9]);
-		}
-		if ( pAd->Antenna.field.RxPath >= 3 ) // 3R
-		{
-			ate_print("RSSI2 = %d, %d, %d, %d, %d, %d, %d, %d, %d, %d\n",
-				RSSI[2][0], RSSI[2][1], RSSI[2][2],
-				RSSI[2][3], RSSI[2][4], RSSI[2][5],
-				RSSI[2][6], RSSI[2][7], RSSI[2][8],
-				RSSI[2][9]);
-		}
-		ate_print("**********************************************************\n");
-#endif // 0 //
-	}
-
-	pAd->ate.Channel = Org_Channel;
-	ATEAsicSwitchChannel(pAd);
-
-	// Restore original value
-    ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, Org_BBP66value);
-    ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, Org_BBP69value);
-    ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, Org_BBP70value);
-
-	return;
-}
-
-BOOLEAN SyncTxRxConfig(PRTMP_ADAPTER pAd, USHORT offset, UCHAR value)
-{
-	UCHAR tmp = 0, bbp_data = 0;
-
-	if (ATE_ON(pAd))
-	{
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, offset, &bbp_data);
-	}
-	else
-	{
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, offset, &bbp_data);
-	}
-
-	/* confirm again */
-	ASSERT(bbp_data == value);
-
-	switch(offset)
-	{
-		case BBP_R1:
-			/* Need to sync. tx configuration with legacy ATE. */
-			tmp = (bbp_data & ((1 << 4) | (1 << 3))/* 0x18 */) >> 3;
-		    switch(tmp)
-		    {
-				/* The BBP R1 bit[4:3] = 2 :: Both DACs will be used by QA. */
-		        case 2:
-					/* All */
-					pAd->ate.TxAntennaSel = 0;
-		            break;
-				/* The BBP R1 bit[4:3] = 0 :: DAC 0 will be used by QA. */
-		        case 0:
-					/* Antenna one */
-					pAd->ate.TxAntennaSel = 1;
-		            break;
-				/* The BBP R1 bit[4:3] = 1 :: DAC 1 will be used by QA. */
-		        case 1:
-					/* Antenna two */
-					pAd->ate.TxAntennaSel = 2;
-		            break;
-		        default:
-		            DBGPRINT(RT_DEBUG_TRACE, ("%s -- Sth. wrong!  : return FALSE; \n", __func__));
-		            return FALSE;
-		    }
-			break;/* case BBP_R1 */
-
-		case BBP_R3:
-			/* Need to sync. rx configuration with legacy ATE. */
-			tmp = (bbp_data & ((1 << 1) | (1 << 0))/* 0x03 */);
-		    switch(tmp)
-		    {
-				/* The BBP R3 bit[1:0] = 3 :: All ADCs will be used by QA. */
-		        case 3:
-					/* All */
-					pAd->ate.RxAntennaSel = 0;
-		            break;
-				/* The BBP R3 bit[1:0] = 0 :: ADC 0 will be used by QA, */
-				/* unless the BBP R3 bit[4:3] = 2 */
-		        case 0:
-					/* Antenna one */
-					pAd->ate.RxAntennaSel = 1;
-					tmp = ((bbp_data & ((1 << 4) | (1 << 3))/* 0x03 */) >> 3);
-					if (tmp == 2)// 3R
-					{
-						/* Default : All ADCs will be used by QA */
-						pAd->ate.RxAntennaSel = 0;
-					}
-		            break;
-				/* The BBP R3 bit[1:0] = 1 :: ADC 1 will be used by QA. */
-		        case 1:
-					/* Antenna two */
-					pAd->ate.RxAntennaSel = 2;
-		            break;
-				/* The BBP R3 bit[1:0] = 2 :: ADC 2 will be used by QA. */
-		        case 2:
-					/* Antenna three */
-					pAd->ate.RxAntennaSel = 3;
-		            break;
-		        default:
-		            DBGPRINT(RT_DEBUG_ERROR, ("%s -- Impossible!  : return FALSE; \n", __func__));
-		            return FALSE;
-		    }
-			break;/* case BBP_R3 */
-
-        default:
-            DBGPRINT(RT_DEBUG_ERROR, ("%s -- Sth. wrong!  : return FALSE; \n", __func__));
-            return FALSE;
-
-	}
-	return TRUE;
-}
-
-static VOID memcpy_exl(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len)
-{
-	ULONG i, Value = 0;
-	ULONG *pDst, *pSrc;
-	UCHAR *p8;
-
-	p8 = src;
-	pDst = (ULONG *) dst;
-	pSrc = (ULONG *) src;
-
-	for (i = 0 ; i < (len/4); i++)
-	{
-		/* For alignment issue, we need a variable "Value". */
-		memmove(&Value, pSrc, 4);
-		Value = htonl(Value);
-		memmove(pDst, &Value, 4);
-		pDst++;
-		pSrc++;
-	}
-	if ((len % 4) != 0)
-	{
-		/* wish that it will never reach here */
-		memmove(&Value, pSrc, (len % 4));
-		Value = htonl(Value);
-		memmove(pDst, &Value, (len % 4));
-	}
-}
-
-static VOID memcpy_exs(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len)
-{
-	ULONG i;
-	UCHAR *pDst, *pSrc;
-
-	pDst = dst;
-	pSrc = src;
-
-	for (i = 0; i < (len/2); i++)
-	{
-		memmove(pDst, pSrc, 2);
-		*((USHORT *)pDst) = htons(*((USHORT *)pDst));
-		pDst+=2;
-		pSrc+=2;
-	}
-
-	if ((len % 2) != 0)
-	{
-		memmove(pDst, pSrc, 1);
-	}
-}
-
-static VOID RTMP_IO_READ_BULK(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, UINT32 len)
-{
-	UINT32 i, Value;
-	UINT32 *pDst, *pSrc;
-
-	pDst = (UINT32 *) dst;
-	pSrc = (UINT32 *) src;
-
-	for (i = 0 ; i < (len/4); i++)
-	{
-		RTMP_IO_READ32(pAd, (ULONG)pSrc, &Value);
-		Value = htonl(Value);
-		memmove(pDst, &Value, 4);
-		pDst++;
-		pSrc++;
-	}
-	return;
-}
-
-// TODO:
-#if 0
-/* These work only when RALINK_ATE is defined */
-INT Set_TxStart_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG value = simple_strtol(arg, 0, 10);
-	UCHAR buffer[26] = {0x88, 0x02, 0x2c, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x00, 0x55, 0x44, 0x33, 0x22, 0x11, 0xc0, 0x22, 0x00, 0x00};
-	POS_COOKIE pObj;
-
-	if (pAd->ate.TxStatus != 0)
-		return FALSE;
-
-	pAd->ate.TxInfo = 0x04000000;
-	bzero(&pAd->ate.TxWI, sizeof(TXWI_STRUC));
-	pAd->ate.TxWI.PHYMODE = 0;// MODE_CCK
-	pAd->ate.TxWI.MPDUtotalByteCount = 1226;
-	pAd->ate.TxWI.MCS = 3;
-	//pAd->ate.Mode = ATE_START;
-	pAd->ate.Mode |= ATE_TXFRAME;
-	pAd->ate.TxCount = value;
-	pAd->ate.QID = 0;
-	pAd->ate.HLen = 26;
-	pAd->ate.PLen = 0;
-	pAd->ate.DLen = 1200;
-	memcpy(pAd->ate.Header, buffer, 26);
-	pAd->ate.bQATxStart = TRUE;
-	//pObj = (POS_COOKIE) pAd->OS_Cookie;
-	//tasklet_hi_schedule(&pObj->AteTxTask);
-	return TRUE;
-}
-#endif  /* end of #if 0 */
-
-INT Set_TxStop_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ATEDBGPRINT(RT_DEBUG_TRACE,("Set_TxStop_Proc\n"));
-
-	if (Set_ATE_Proc(pAd, "TXSTOP"))
-	{
-	return TRUE;
-}
-	else
-	{
-		return FALSE;
-	}
-}
-
-INT Set_RxStop_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ATEDBGPRINT(RT_DEBUG_TRACE,("Set_RxStop_Proc\n"));
-
-	if (Set_ATE_Proc(pAd, "RXSTOP"))
-	{
-	return TRUE;
-}
-	else
-	{
-		return FALSE;
-	}
-}
-
-#if 0
-INT Set_EEWrite_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	USHORT offset = 0, value;
-	PUCHAR p2 = arg;
-
-	while((*p2 != ':') && (*p2 != '\0'))
-	{
-		p2++;
-	}
-
-	if (*p2 == ':')
-	{
-		A2Hex(offset, arg);
-		A2Hex(value, p2+ 1);
-	}
-	else
-	{
-		A2Hex(value, arg);
-	}
-
-	if (offset >= EEPROM_SIZE)
-	{
-		ate_print("Offset can not exceed EEPROM_SIZE( == 0x%04x)\n", EEPROM_SIZE);
-		return FALSE;
-	}
-
-	RTMP_EEPROM_WRITE16(pAd, offset, value);
-
-	return TRUE;
-}
-
-INT Set_BBPRead_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UCHAR value = 0, offset;
-
-	A2Hex(offset, arg);
-
-	if (ATE_ON(pAd))
-	{
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, offset,  &value);
-	}
-	else
-	{
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, offset,  &value);
-	}
-
-	ate_print("%x\n", value);
-
-	return TRUE;
-}
-
-
-INT Set_BBPWrite_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	USHORT offset = 0;
-	PUCHAR p2 = arg;
-	UCHAR value;
-
-	while((*p2 != ':') && (*p2 != '\0'))
-	{
-		p2++;
-	}
-
-	if (*p2 == ':')
-	{
-		A2Hex(offset, arg);
-		A2Hex(value, p2+ 1);
-	}
-	else
-	{
-		A2Hex(value, arg);
-	}
-
-	if (ATE_ON(pAd))
-	{
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, offset,  value);
-	}
-	else
-	{
-		RTNP_BBP_IO_WRITE8_BY_REG_ID(pAd, offset,  value);
-	}
-
-	return TRUE;
-}
-
-INT Set_RFWrite_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	PUCHAR p2, p3, p4;
-	ULONG R1, R2, R3, R4;
-
-	p2 = arg;
-
-	while((*p2 != ':') && (*p2 != '\0'))
-	{
-		p2++;
-	}
-
-	if (*p2 != ':')
-		return FALSE;
-
-	p3 = p2 + 1;
-
-	while((*p3 != ':') && (*p3 != '\0'))
-	{
-		p3++;
-	}
-
-	if (*p3 != ':')
-		return FALSE;
-
-	p4 = p3 + 1;
-
-	while((*p4 != ':') && (*p4 != '\0'))
-	{
-		p4++;
-	}
-
-	if (*p4 != ':')
-		return FALSE;
-
-
-	A2Hex(R1, arg);
-	A2Hex(R2, p2 + 1);
-	A2Hex(R3, p3 + 1);
-	A2Hex(R4, p4 + 1);
-
-	RTMP_RF_IO_WRITE32(pAd, R1);
-	RTMP_RF_IO_WRITE32(pAd, R2);
-	RTMP_RF_IO_WRITE32(pAd, R3);
-	RTMP_RF_IO_WRITE32(pAd, R4);
-
-	return TRUE;
-}
-#endif  // end of #if 0 //
-#endif	// RALINK_28xx_QA //
-
-#endif	// RALINK_ATE //
-
diff --git a/drivers/staging/rt2870/rt_ate.h b/drivers/staging/rt2870/rt_ate.h
deleted file mode 100644
index b618ce3599a..00000000000
--- a/drivers/staging/rt2870/rt_ate.h
+++ /dev/null
@@ -1,315 +0,0 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-#ifndef __ATE_H__
-#define __ATE_H__
-
-#ifndef UCOS
-#define ate_print printk
-#define ATEDBGPRINT DBGPRINT
-
-#ifdef RT2870
-#define EEPROM_SIZE								0x400
-#ifdef CONFIG_STA_SUPPORT
-#define EEPROM_BIN_FILE_NAME  "/etc/Wireless/RT2870STA/e2p.bin"
-#endif // CONFIG_STA_SUPPORT //
-#endif // RT2870 //
-#else // !UCOS //
-#define fATE_LOAD_EEPROM						0x0C43
-#ifdef CONFIG_PRINTK
-extern INT ConsoleResponse(IN PUCHAR buff);
-extern int (*remote_display)(char *);
-extern void puts (const char *s);
-
-/* specificly defined to redirect and show ate-related messages to host. */
-/* Try to define ate_print as a macro. */
-#define ate_print(fmt, args...)                 \
-do{   int (*org_remote_display)(char *) = NULL;   \
-	org_remote_display = remote_display;\
-	/* Save original "remote_display" */\
-	remote_display = (int (*)(char *))ConsoleResponse;           \
-	printk(fmt, ## args);                       \
-	/* Restore the remote_display function pointer */        \
-	remote_display = org_remote_display; }while(0)
-
-#define ATEDBGPRINT(Level, Fmt)    	\
-{                                   \
-    if ((Level) <= RTDebugLevel)      \
-    {                               \
-        ate_print Fmt;					\
-    }                               \
-}
-#endif // CONFIG_PRINTK //
-#endif // !UCOS //
-
-#define ATE_ON(_p)              (((_p)->ate.Mode) != ATE_STOP)
-
-/* RT2880_iNIC will define "RT2860". */
-
-/* RT2880_iNIC will define RT2860. */
-
-#ifdef RT2870
-#define EEPROM_SIZE								0x400
-#ifdef CONFIG_STA_SUPPORT
-#define EEPROM_BIN_FILE_NAME  "/etc/Wireless/RT2870STA/e2p.bin"
-#endif // CONFIG_STA_SUPPORT //
-#endif // RT2870 //
-
-#ifdef RT2870
-#define ATE_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV)    RTMP_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV)
-#define ATE_BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V)    RTMP_BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V)
-
-#define BULK_OUT_LOCK(pLock, IrqFlags)	\
-		if(1 /*!(in_interrupt() & 0xffff0000)*/)	\
-			RTMP_IRQ_LOCK((pLock), IrqFlags);
-
-#define BULK_OUT_UNLOCK(pLock, IrqFlags)	\
-		if(1 /*!(in_interrupt() & 0xffff0000)*/)	\
-			RTMP_IRQ_UNLOCK((pLock), IrqFlags);
-
-// Prototypes of completion funuc.
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-#define ATE_RTUSBBulkOutDataPacketComplete(purb, pt_regs)    ATE_RTUSBBulkOutDataPacketComplete(purb)
-#endif
-
-VOID ATE_RTUSBBulkOutDataPacketComplete(
-	IN purbb_t purb,
-	OUT struct pt_regs *pt_regs);
-
-VOID ATE_RTUSBBulkOutDataPacket(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			BulkOutPipeId);
-
-VOID ATE_RTUSBCancelPendingBulkInIRP(
-	IN	PRTMP_ADAPTER	pAd);
-#endif // RT2870 //
-
-VOID rt_ee_read_all(
-	IN  PRTMP_ADAPTER   pAd,
-	OUT USHORT *Data);
-
-
-VOID rt_ee_write_all(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  USHORT *Data);
-
-INT Set_ATE_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_DA_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_SA_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_BSSID_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_CHANNEL_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_POWER0_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_POWER1_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_Antenna_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_RX_Antenna_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_FREQOFFSET_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_BW_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_LENGTH_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_COUNT_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_MCS_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_MODE_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_GI_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-
-INT	Set_ATE_RX_FER_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Read_RF_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Write_RF1_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Write_RF2_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Write_RF3_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Write_RF4_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Load_E2P_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Read_E2P_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_Show_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_Help_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-#ifdef RALINK_ATE
-#ifdef RALINK_28xx_QA
-VOID ATE_QA_Statistics(
-	IN PRTMP_ADAPTER		pAd,
-	IN PRXWI_STRUC			pRxWI,
-	IN PRT28XX_RXD_STRUC    p28xxRxD,
-	IN PHEADER_802_11		pHeader);
-
-VOID RtmpDoAte(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq);
-
-VOID BubbleSort(
-	IN  INT32 n,
-	IN  INT32 a[]);
-
-VOID CalNoiseLevel(
-	IN  PRTMP_ADAPTER   pAdapter,
-	IN  UCHAR           channel,
-	OUT INT32           buffer[3][10]);
-
-BOOLEAN SyncTxRxConfig(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	USHORT			offset,
-	IN	UCHAR			value);
-
-#if 0
-INT Set_TxStart_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-#endif  // 0 //
-
-INT Set_TxStop_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_RxStop_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-#if 0
-INT Set_EERead_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_EEWrite_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_BBPRead_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_BBPWrite_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_RFWrite_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-#endif // end of #if 0 //
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
-VOID ATEAsicSwitchChannel(
-	IN PRTMP_ADAPTER pAd);
-
-VOID ATEAsicAdjustTxPower(
-	IN PRTMP_ADAPTER pAd);
-
-VOID ATEDisableAsicProtect(
-	IN		PRTMP_ADAPTER	pAd);
-
-CHAR ATEConvertToRssi(
-	IN PRTMP_ADAPTER  pAd,
-	IN CHAR				Rssi,
-	IN UCHAR    RssiNumber);
-
-VOID ATESampleRssi(
-	IN PRTMP_ADAPTER	pAd,
-	IN PRXWI_STRUC		pRxWI);
-
-
-#ifdef CONFIG_STA_SUPPORT
-VOID RTMPStationStop(
-    IN  PRTMP_ADAPTER   pAd);
-
-VOID RTMPStationStart(
-    IN  PRTMP_ADAPTER   pAd);
-#endif // CONFIG_STA_SUPPORT //
-#endif // __ATE_H__ //
diff --git a/drivers/staging/rt2870/rt_config.h b/drivers/staging/rt2870/rt_config.h
index e3fe2642633..1f6d6ed5630 100644
--- a/drivers/staging/rt2870/rt_config.h
+++ b/drivers/staging/rt2870/rt_config.h
@@ -1,104 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	rt_config.h
-
-	Abstract:
-	Central header file to maintain all include files for all NDIS
-	miniport driver routines.
-
-	Revision History:
-	Who         When          What
-	--------    ----------    ----------------------------------------------
-	Paul Lin    08-01-2002    created
-
-*/
-#ifndef	__RT_CONFIG_H__
-#define	__RT_CONFIG_H__
-
-#include    "rtmp_type.h"
-#ifdef UCOS
-#include "includes.h"
-#include <stdio.h>
-#include 	"rt_ucos.h"
-#endif
-
-#ifdef LINUX
-#include	"rt_linux.h"
-#endif
-#include    "rtmp_def.h"
-#include    "rt28xx.h"
-
-
-#ifdef RT2870
-#include	"rt2870.h"
-#endif // RT2870 //
-
-#include    "oid.h"
-#include    "mlme.h"
-#include    "wpa.h"
-#include    "md5.h"
-#include    "rtmp.h"
-#include	"ap.h"
-#include	"dfs.h"
-#include	"chlist.h"
-#include	"spectrum.h"
-
-
-#ifdef LEAP_SUPPORT
-#include    "leap.h"
-#endif // LEAP_SUPPORT //
-
-#ifdef BLOCK_NET_IF
-#include "netif_block.h"
-#endif // BLOCK_NET_IF //
-
-#ifdef IGMP_SNOOP_SUPPORT
-#include "igmp_snoop.h"
-#endif // IGMP_SNOOP_SUPPORT //
-
-#ifdef RALINK_ATE
-#include "rt_ate.h"
-#endif // RALINK_ATE //
-
-
-
-#ifdef CONFIG_STA_SUPPORT
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-#ifndef WPA_SUPPLICANT_SUPPORT
-#error "Build for being controlled by NetworkManager or wext, please set HAS_WPA_SUPPLICANT=y and HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y"
-#endif // WPA_SUPPLICANT_SUPPORT //
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef IKANOS_VX_1X0
-#include	"vr_ikans.h"
-#endif // IKANOS_VX_1X0 //
-
-#endif	// __RT_CONFIG_H__
-
+#include "../rt2860/rt_config.h"
diff --git a/drivers/staging/rt2870/rt_linux.c b/drivers/staging/rt2870/rt_linux.c
index e38552c5ccb..88c697bf90e 100644
--- a/drivers/staging/rt2870/rt_linux.c
+++ b/drivers/staging/rt2870/rt_linux.c
@@ -1,1095 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-#include "rt_config.h"
-
-ULONG	RTDebugLevel = RT_DEBUG_ERROR;
-
-BUILD_TIMER_FUNCTION(MlmePeriodicExec);
-//BUILD_TIMER_FUNCTION(MlmeRssiReportExec);
-BUILD_TIMER_FUNCTION(AsicRxAntEvalTimeout);
-BUILD_TIMER_FUNCTION(APSDPeriodicExec);
-BUILD_TIMER_FUNCTION(AsicRfTuningExec);
-#ifdef RT2870
-BUILD_TIMER_FUNCTION(BeaconUpdateExec);
-#endif // RT2870 //
-
-
-#ifdef CONFIG_STA_SUPPORT
-BUILD_TIMER_FUNCTION(BeaconTimeout);
-BUILD_TIMER_FUNCTION(ScanTimeout);
-BUILD_TIMER_FUNCTION(AuthTimeout);
-BUILD_TIMER_FUNCTION(AssocTimeout);
-BUILD_TIMER_FUNCTION(ReassocTimeout);
-BUILD_TIMER_FUNCTION(DisassocTimeout);
-BUILD_TIMER_FUNCTION(LinkDownExec);
-#ifdef LEAP_SUPPORT
-BUILD_TIMER_FUNCTION(LeapAuthTimeout);
-#endif
-BUILD_TIMER_FUNCTION(StaQuickResponeForRateUpExec);
-BUILD_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc);
-#ifdef QOS_DLS_SUPPORT
-BUILD_TIMER_FUNCTION(DlsTimeoutAction);
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
-// for wireless system event message
-char const *pWirelessSysEventText[IW_SYS_EVENT_TYPE_NUM] = {
-	// system status event
-    "had associated successfully",							/* IW_ASSOC_EVENT_FLAG */
-    "had disassociated",									/* IW_DISASSOC_EVENT_FLAG */
-    "had deauthenticated",									/* IW_DEAUTH_EVENT_FLAG */
-    "had been aged-out and disassociated",					/* IW_AGEOUT_EVENT_FLAG */
-    "occurred CounterMeasures attack",						/* IW_COUNTER_MEASURES_EVENT_FLAG */
-    "occurred replay counter different in Key Handshaking",	/* IW_REPLAY_COUNTER_DIFF_EVENT_FLAG */
-    "occurred RSNIE different in Key Handshaking",			/* IW_RSNIE_DIFF_EVENT_FLAG */
-    "occurred MIC different in Key Handshaking",			/* IW_MIC_DIFF_EVENT_FLAG */
-    "occurred ICV error in RX",								/* IW_ICV_ERROR_EVENT_FLAG */
-    "occurred MIC error in RX",								/* IW_MIC_ERROR_EVENT_FLAG */
-	"Group Key Handshaking timeout",						/* IW_GROUP_HS_TIMEOUT_EVENT_FLAG */
-	"Pairwise Key Handshaking timeout",						/* IW_PAIRWISE_HS_TIMEOUT_EVENT_FLAG */
-	"RSN IE sanity check failure",							/* IW_RSNIE_SANITY_FAIL_EVENT_FLAG */
-	"set key done in WPA/WPAPSK",							/* IW_SET_KEY_DONE_WPA1_EVENT_FLAG */
-	"set key done in WPA2/WPA2PSK",                         /* IW_SET_KEY_DONE_WPA2_EVENT_FLAG */
-	"connects with our wireless client",                    /* IW_STA_LINKUP_EVENT_FLAG */
-	"disconnects with our wireless client",                 /* IW_STA_LINKDOWN_EVENT_FLAG */
-	"scan completed"										/* IW_SCAN_COMPLETED_EVENT_FLAG */
-	"scan terminate!! Busy!! Enqueue fail!!"				/* IW_SCAN_ENQUEUE_FAIL_EVENT_FLAG */
-	};
-
-// for wireless IDS_spoof_attack event message
-char const *pWirelessSpoofEventText[IW_SPOOF_EVENT_TYPE_NUM] = {
-    "detected conflict SSID",								/* IW_CONFLICT_SSID_EVENT_FLAG */
-    "detected spoofed association response",				/* IW_SPOOF_ASSOC_RESP_EVENT_FLAG */
-    "detected spoofed reassociation responses",				/* IW_SPOOF_REASSOC_RESP_EVENT_FLAG */
-    "detected spoofed probe response",						/* IW_SPOOF_PROBE_RESP_EVENT_FLAG */
-    "detected spoofed beacon",								/* IW_SPOOF_BEACON_EVENT_FLAG */
-    "detected spoofed disassociation",						/* IW_SPOOF_DISASSOC_EVENT_FLAG */
-    "detected spoofed authentication",						/* IW_SPOOF_AUTH_EVENT_FLAG */
-    "detected spoofed deauthentication",					/* IW_SPOOF_DEAUTH_EVENT_FLAG */
-    "detected spoofed unknown management frame",			/* IW_SPOOF_UNKNOWN_MGMT_EVENT_FLAG */
-	"detected replay attack"								/* IW_REPLAY_ATTACK_EVENT_FLAG */
-	};
-
-// for wireless IDS_flooding_attack event message
-char const *pWirelessFloodEventText[IW_FLOOD_EVENT_TYPE_NUM] = {
-	"detected authentication flooding",						/* IW_FLOOD_AUTH_EVENT_FLAG */
-    "detected association request flooding",				/* IW_FLOOD_ASSOC_REQ_EVENT_FLAG */
-    "detected reassociation request flooding",				/* IW_FLOOD_REASSOC_REQ_EVENT_FLAG */
-    "detected probe request flooding",						/* IW_FLOOD_PROBE_REQ_EVENT_FLAG */
-    "detected disassociation flooding",						/* IW_FLOOD_DISASSOC_EVENT_FLAG */
-    "detected deauthentication flooding",					/* IW_FLOOD_DEAUTH_EVENT_FLAG */
-    "detected 802.1x eap-request flooding"					/* IW_FLOOD_EAP_REQ_EVENT_FLAG */
-	};
-
-/* timeout -- ms */
-VOID RTMP_SetPeriodicTimer(
-	IN	NDIS_MINIPORT_TIMER *pTimer,
-	IN	unsigned long timeout)
-{
-	timeout = ((timeout*HZ) / 1000);
-	pTimer->expires = jiffies + timeout;
-	add_timer(pTimer);
-}
-
-/* convert NdisMInitializeTimer --> RTMP_OS_Init_Timer */
-VOID RTMP_OS_Init_Timer(
-	IN	PRTMP_ADAPTER pAd,
-	IN	NDIS_MINIPORT_TIMER *pTimer,
-	IN	TIMER_FUNCTION function,
-	IN	PVOID data)
-{
-	init_timer(pTimer);
-    pTimer->data = (unsigned long)data;
-    pTimer->function = function;
-}
-
-
-VOID RTMP_OS_Add_Timer(
-	IN	NDIS_MINIPORT_TIMER		*pTimer,
-	IN	unsigned long timeout)
-{
-	if (timer_pending(pTimer))
-		return;
-
-	timeout = ((timeout*HZ) / 1000);
-	pTimer->expires = jiffies + timeout;
-	add_timer(pTimer);
-}
-
-VOID RTMP_OS_Mod_Timer(
-	IN	NDIS_MINIPORT_TIMER		*pTimer,
-	IN	unsigned long timeout)
-{
-	timeout = ((timeout*HZ) / 1000);
-	mod_timer(pTimer, jiffies + timeout);
-}
-
-VOID RTMP_OS_Del_Timer(
-	IN	NDIS_MINIPORT_TIMER		*pTimer,
-	OUT	BOOLEAN					*pCancelled)
-{
-	if (timer_pending(pTimer))
-	{
-		*pCancelled = del_timer_sync(pTimer);
-	}
-	else
-	{
-		*pCancelled = TRUE;
-	}
-
-}
-
-VOID RTMP_OS_Release_Packet(
-	IN	PRTMP_ADAPTER pAd,
-	IN	PQUEUE_ENTRY  pEntry)
-{
-	//RTMPFreeNdisPacket(pAd, (struct sk_buff *)pEntry);
-}
-
-// Unify all delay routine by using udelay
-VOID RTMPusecDelay(
-	IN	ULONG	usec)
-{
-	ULONG	i;
-
-	for (i = 0; i < (usec / 50); i++)
-		udelay(50);
-
-	if (usec % 50)
-		udelay(usec % 50);
-}
-
-void RTMP_GetCurrentSystemTime(LARGE_INTEGER *time)
-{
-	time->u.LowPart = jiffies;
-}
-
-// pAd MUST allow to be NULL
-NDIS_STATUS os_alloc_mem(
-	IN	PRTMP_ADAPTER pAd,
-	OUT	PUCHAR *mem,
-	IN	ULONG  size)
-{
-	*mem = (PUCHAR) kmalloc(size, GFP_ATOMIC);
-	if (*mem)
-		return (NDIS_STATUS_SUCCESS);
-	else
-		return (NDIS_STATUS_FAILURE);
-}
-
-// pAd MUST allow to be NULL
-NDIS_STATUS os_free_mem(
-	IN	PRTMP_ADAPTER pAd,
-	IN	PUCHAR mem)
-{
-
-	ASSERT(mem);
-	kfree(mem);
-	return (NDIS_STATUS_SUCCESS);
-}
-
-
-PNDIS_PACKET RTMP_AllocateFragPacketBuffer(
-	IN	PRTMP_ADAPTER pAd,
-	IN	ULONG	Length)
-{
-	struct sk_buff *pkt;
-
-	pkt = dev_alloc_skb(Length);
-
-	if (pkt == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("can't allocate frag rx %ld size packet\n",Length));
-	}
-
-	if (pkt)
-	{
-		RTMP_SET_PACKET_SOURCE(OSPKT_TO_RTPKT(pkt), PKTSRC_NDIS);
-	}
-
-	return (PNDIS_PACKET) pkt;
-}
-
-
-PNDIS_PACKET RTMP_AllocateTxPacketBuffer(
-	IN	PRTMP_ADAPTER pAd,
-	IN	ULONG	Length,
-	IN	BOOLEAN	Cached,
-	OUT	PVOID	*VirtualAddress)
-{
-	struct sk_buff *pkt;
-
-	pkt = dev_alloc_skb(Length);
-
-	if (pkt == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("can't allocate tx %ld size packet\n",Length));
-	}
-
-	if (pkt)
-	{
-		RTMP_SET_PACKET_SOURCE(OSPKT_TO_RTPKT(pkt), PKTSRC_NDIS);
-		*VirtualAddress = (PVOID) pkt->data;
-	}
-	else
-	{
-		*VirtualAddress = (PVOID) NULL;
-	}
-
-	return (PNDIS_PACKET) pkt;
-}
-
-
-VOID build_tx_packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket,
-	IN	PUCHAR	pFrame,
-	IN	ULONG	FrameLen)
-{
-
-	struct sk_buff	*pTxPkt;
-
-	ASSERT(pPacket);
-	pTxPkt = RTPKT_TO_OSPKT(pPacket);
-
-	NdisMoveMemory(skb_put(pTxPkt, FrameLen), pFrame, FrameLen);
-}
-
-VOID	RTMPFreeAdapter(
-	IN	PRTMP_ADAPTER	pAd)
-{
-    POS_COOKIE os_cookie;
-	int index;
-
-	os_cookie=(POS_COOKIE)pAd->OS_Cookie;
-
-	kfree(pAd->BeaconBuf);
-
-
-	NdisFreeSpinLock(&pAd->MgmtRingLock);
-
-
-	for (index =0 ; index < NUM_OF_TX_RING; index++)
-	{
-    	NdisFreeSpinLock(&pAd->TxSwQueueLock[index]);
-		NdisFreeSpinLock(&pAd->DeQueueLock[index]);
-		pAd->DeQueueRunning[index] = FALSE;
-	}
-
-	NdisFreeSpinLock(&pAd->irq_lock);
-
-
-	vfree(pAd); // pci_free_consistent(os_cookie->pci_dev,sizeof(RTMP_ADAPTER),pAd,os_cookie->pAd_pa);
-	kfree(os_cookie);
-}
-
-BOOLEAN OS_Need_Clone_Packet(void)
-{
-	return (FALSE);
-}
-
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		clone an input NDIS PACKET to another one. The new internally created NDIS PACKET
-		must have only one NDIS BUFFER
-		return - byte copied. 0 means can't create NDIS PACKET
-		NOTE: internally created NDIS_PACKET should be destroyed by RTMPFreeNdisPacket
-
-	Arguments:
-		pAd 	Pointer to our adapter
-		pInsAMSDUHdr	EWC A-MSDU format has extra 14-bytes header. if TRUE, insert this 14-byte hdr in front of MSDU.
-		*pSrcTotalLen			return total packet length. This lenght is calculated with 802.3 format packet.
-
-	Return Value:
-		NDIS_STATUS_SUCCESS
-		NDIS_STATUS_FAILURE
-
-	Note:
-
-	========================================================================
-*/
-NDIS_STATUS RTMPCloneNdisPacket(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	BOOLEAN			pInsAMSDUHdr,
-	IN	PNDIS_PACKET	pInPacket,
-	OUT PNDIS_PACKET   *ppOutPacket)
-{
-
-	struct sk_buff *pkt;
-
-	ASSERT(pInPacket);
-	ASSERT(ppOutPacket);
-
-	// 1. Allocate a packet
-	pkt = dev_alloc_skb(2048);
-
-	if (pkt == NULL)
-	{
-		return NDIS_STATUS_FAILURE;
-	}
-
- 	skb_put(pkt, GET_OS_PKT_LEN(pInPacket));
-	NdisMoveMemory(pkt->data, GET_OS_PKT_DATAPTR(pInPacket), GET_OS_PKT_LEN(pInPacket));
-	*ppOutPacket = OSPKT_TO_RTPKT(pkt);
-
-
-	RTMP_SET_PACKET_SOURCE(OSPKT_TO_RTPKT(pkt), PKTSRC_NDIS);
-
-	printk("###Clone###\n");
-
-	return NDIS_STATUS_SUCCESS;
-}
-
-
-// the allocated NDIS PACKET must be freed via RTMPFreeNdisPacket()
-NDIS_STATUS RTMPAllocateNdisPacket(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT PNDIS_PACKET   *ppPacket,
-	IN	PUCHAR			pHeader,
-	IN	UINT			HeaderLen,
-	IN	PUCHAR			pData,
-	IN	UINT			DataLen)
-{
-	PNDIS_PACKET	pPacket;
-	ASSERT(pData);
-	ASSERT(DataLen);
-
-	// 1. Allocate a packet
-	pPacket = (PNDIS_PACKET *) dev_alloc_skb(HeaderLen + DataLen + TXPADDING_SIZE);
-	if (pPacket == NULL)
- 	{
-		*ppPacket = NULL;
-#ifdef DEBUG
-		printk("RTMPAllocateNdisPacket Fail\n\n");
-#endif
-		return NDIS_STATUS_FAILURE;
-	}
-
-	// 2. clone the frame content
-	if (HeaderLen > 0)
-		NdisMoveMemory(GET_OS_PKT_DATAPTR(pPacket), pHeader, HeaderLen);
-	if (DataLen > 0)
-		NdisMoveMemory(GET_OS_PKT_DATAPTR(pPacket) + HeaderLen, pData, DataLen);
-
-	// 3. update length of packet
- 	skb_put(GET_OS_PKT_TYPE(pPacket), HeaderLen+DataLen);
-
-	RTMP_SET_PACKET_SOURCE(pPacket, PKTSRC_NDIS);
-//	printk("%s : pPacket = %p, len = %d\n", __func__, pPacket, GET_OS_PKT_LEN(pPacket));
-	*ppPacket = pPacket;
-	return NDIS_STATUS_SUCCESS;
-}
-
-/*
-  ========================================================================
-  Description:
-	This routine frees a miniport internally allocated NDIS_PACKET and its
-	corresponding NDIS_BUFFER and allocated memory.
-  ========================================================================
-*/
-VOID RTMPFreeNdisPacket(
-	IN PRTMP_ADAPTER pAd,
-	IN PNDIS_PACKET  pPacket)
-{
-	dev_kfree_skb_any(RTPKT_TO_OSPKT(pPacket));
-}
-
-
-// IRQL = DISPATCH_LEVEL
-// NOTE: we do have an assumption here, that Byte0 and Byte1 always reasid at the same
-//			 scatter gather buffer
-NDIS_STATUS Sniff2BytesFromNdisBuffer(
-	IN	PNDIS_BUFFER	pFirstBuffer,
-	IN	UCHAR			DesiredOffset,
-	OUT PUCHAR			pByte0,
-	OUT PUCHAR			pByte1)
-{
-    *pByte0 = *(PUCHAR)(pFirstBuffer + DesiredOffset);
-    *pByte1 = *(PUCHAR)(pFirstBuffer + DesiredOffset + 1);
-
-	return NDIS_STATUS_SUCCESS;
-}
-
-
-void RTMP_QueryPacketInfo(
-	IN  PNDIS_PACKET pPacket,
-	OUT PACKET_INFO  *pPacketInfo,
-	OUT PUCHAR		 *pSrcBufVA,
-	OUT	UINT		 *pSrcBufLen)
-{
-	pPacketInfo->BufferCount = 1;
-	pPacketInfo->pFirstBuffer = GET_OS_PKT_DATAPTR(pPacket);
-	pPacketInfo->PhysicalBufferCount = 1;
-	pPacketInfo->TotalPacketLength = GET_OS_PKT_LEN(pPacket);
-
-	*pSrcBufVA = GET_OS_PKT_DATAPTR(pPacket);
-	*pSrcBufLen = GET_OS_PKT_LEN(pPacket);
-}
-
-void RTMP_QueryNextPacketInfo(
-	IN  PNDIS_PACKET *ppPacket,
-	OUT PACKET_INFO  *pPacketInfo,
-	OUT PUCHAR		 *pSrcBufVA,
-	OUT	UINT		 *pSrcBufLen)
-{
-	PNDIS_PACKET pPacket = NULL;
-
-	if (*ppPacket)
-		pPacket = GET_OS_PKT_NEXT(*ppPacket);
-
-	if (pPacket)
-	{
-		pPacketInfo->BufferCount = 1;
-		pPacketInfo->pFirstBuffer = GET_OS_PKT_DATAPTR(pPacket);
-		pPacketInfo->PhysicalBufferCount = 1;
-		pPacketInfo->TotalPacketLength = GET_OS_PKT_LEN(pPacket);
-
-		*pSrcBufVA = GET_OS_PKT_DATAPTR(pPacket);
-		*pSrcBufLen = GET_OS_PKT_LEN(pPacket);
-		*ppPacket = GET_OS_PKT_NEXT(pPacket);
-	}
-	else
-	{
-		pPacketInfo->BufferCount = 0;
-		pPacketInfo->pFirstBuffer = NULL;
-		pPacketInfo->PhysicalBufferCount = 0;
-		pPacketInfo->TotalPacketLength = 0;
-
-		*pSrcBufVA = NULL;
-		*pSrcBufLen = 0;
-		*ppPacket = NULL;
-	}
-}
-
-// not yet support MBSS
-PNET_DEV get_netdev_from_bssid(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			FromWhichBSSID)
-{
-    PNET_DEV dev_p = NULL;
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		dev_p = pAd->net_dev;
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	ASSERT(dev_p);
-	return dev_p; /* return one of MBSS */
-}
-
-PNDIS_PACKET DuplicatePacket(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket,
-	IN	UCHAR			FromWhichBSSID)
-{
-	struct sk_buff	*skb;
-	PNDIS_PACKET	pRetPacket = NULL;
-	USHORT			DataSize;
-	UCHAR			*pData;
-
-	DataSize = (USHORT) GET_OS_PKT_LEN(pPacket);
-	pData = (PUCHAR) GET_OS_PKT_DATAPTR(pPacket);
-
-
-	skb = skb_clone(RTPKT_TO_OSPKT(pPacket), MEM_ALLOC_FLAG);
-	if (skb)
-	{
-		skb->dev = get_netdev_from_bssid(pAd, FromWhichBSSID);
-		pRetPacket = OSPKT_TO_RTPKT(skb);
-	}
-
-#if 0
-	if ((skb = __dev_alloc_skb(DataSize + 2+32, MEM_ALLOC_FLAG)) != NULL)
-	{
-		skb_reserve(skb, 2+32);
-		NdisMoveMemory(skb->tail, pData, DataSize);
-		skb_put(skb, DataSize);
-		skb->dev = get_netdev_from_bssid(pAd, FromWhichBSSID);
-		pRetPacket = OSPKT_TO_RTPKT(skb);
-	}
-#endif
-
-	return pRetPacket;
-
-}
-
-PNDIS_PACKET duplicate_pkt(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pHeader802_3,
-    IN  UINT            HdrLen,
-	IN	PUCHAR			pData,
-	IN	ULONG			DataSize,
-	IN	UCHAR			FromWhichBSSID)
-{
-	struct sk_buff	*skb;
-	PNDIS_PACKET	pPacket = NULL;
-
-
-	if ((skb = __dev_alloc_skb(HdrLen + DataSize + 2, MEM_ALLOC_FLAG)) != NULL)
-	{
-		skb_reserve(skb, 2);
-		NdisMoveMemory(skb->tail, pHeader802_3, HdrLen);
-		skb_put(skb, HdrLen);
-		NdisMoveMemory(skb->tail, pData, DataSize);
-		skb_put(skb, DataSize);
-		skb->dev = get_netdev_from_bssid(pAd, FromWhichBSSID);
-		pPacket = OSPKT_TO_RTPKT(skb);
-	}
-
-	return pPacket;
-}
-
-
-#define TKIP_TX_MIC_SIZE		8
-PNDIS_PACKET duplicate_pkt_with_TKIP_MIC(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket)
-{
-	struct sk_buff	*skb, *newskb;
-
-
-	skb = RTPKT_TO_OSPKT(pPacket);
-	if (skb_tailroom(skb) < TKIP_TX_MIC_SIZE)
-	{
-		// alloc a new skb and copy the packet
-		newskb = skb_copy_expand(skb, skb_headroom(skb), TKIP_TX_MIC_SIZE, GFP_ATOMIC);
-		dev_kfree_skb_any(skb);
-		if (newskb == NULL)
-		{
-			DBGPRINT(RT_DEBUG_ERROR, ("Extend Tx.MIC for packet failed!, dropping packet!\n"));
-			return NULL;
-		}
-		skb = newskb;
-	}
-
-	return OSPKT_TO_RTPKT(skb);
-
-#if 0
-	if ((data = skb_put(skb, TKIP_TX_MIC_SIZE)) != NULL)
-	{	// If we can extend it, well, copy it first.
-		NdisMoveMemory(data, pAd->PrivateInfo.Tx.MIC, TKIP_TX_MIC_SIZE);
-	}
-	else
-	{
-		// Otherwise, copy the packet.
-		newskb = skb_copy_expand(skb, skb_headroom(skb), TKIP_TX_MIC_SIZE, GFP_ATOMIC);
-		dev_kfree_skb_any(skb);
-		if (newskb == NULL)
-		{
-			DBGPRINT(RT_DEBUG_ERROR, ("Extend Tx.MIC to packet failed!, dropping packet\n"));
-			return NULL;
-		}
-		skb = newskb;
-
-		NdisMoveMemory(skb->tail, pAd->PrivateInfo.Tx.MIC, TKIP_TX_MIC_SIZE);
-		skb_put(skb, TKIP_TX_MIC_SIZE);
-	}
-
-	return OSPKT_TO_RTPKT(skb);
-#endif
-
-}
-
-
-
-
-PNDIS_PACKET ClonePacket(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket,
-	IN	PUCHAR			pData,
-	IN	ULONG			DataSize)
-{
-	struct sk_buff	*pRxPkt;
-	struct sk_buff	*pClonedPkt;
-
-	ASSERT(pPacket);
-	pRxPkt = RTPKT_TO_OSPKT(pPacket);
-
-	// clone the packet
-	pClonedPkt = skb_clone(pRxPkt, MEM_ALLOC_FLAG);
-
-	if (pClonedPkt)
-	{
-    	// set the correct dataptr and data len
-    	pClonedPkt->dev = pRxPkt->dev;
-    	pClonedPkt->data = pData;
-    	pClonedPkt->len = DataSize;
-    	pClonedPkt->tail = pClonedPkt->data + pClonedPkt->len;
-		ASSERT(DataSize < 1530);
-	}
-	return pClonedPkt;
-}
-
-//
-// change OS packet DataPtr and DataLen
-//
-void  update_os_packet_info(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN  UCHAR			FromWhichBSSID)
-{
-	struct sk_buff	*pOSPkt;
-
-	ASSERT(pRxBlk->pRxPacket);
-	pOSPkt = RTPKT_TO_OSPKT(pRxBlk->pRxPacket);
-
-	pOSPkt->dev = get_netdev_from_bssid(pAd, FromWhichBSSID);
-	pOSPkt->data = pRxBlk->pData;
-	pOSPkt->len = pRxBlk->DataSize;
-	pOSPkt->tail = pOSPkt->data + pOSPkt->len;
-}
-
-
-void wlan_802_11_to_802_3_packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN	PUCHAR			pHeader802_3,
-	IN  UCHAR			FromWhichBSSID)
-{
-	struct sk_buff	*pOSPkt;
-
-	ASSERT(pRxBlk->pRxPacket);
-	ASSERT(pHeader802_3);
-
-	pOSPkt = RTPKT_TO_OSPKT(pRxBlk->pRxPacket);
-
-	pOSPkt->dev = get_netdev_from_bssid(pAd, FromWhichBSSID);
-	pOSPkt->data = pRxBlk->pData;
-	pOSPkt->len = pRxBlk->DataSize;
-	pOSPkt->tail = pOSPkt->data + pOSPkt->len;
-
-	//
-	// copy 802.3 header
-	//
-	//
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		NdisMoveMemory(skb_push(pOSPkt, LENGTH_802_3), pHeader802_3, LENGTH_802_3);
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-
-
-void announce_802_3_packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket)
-{
-
-	struct sk_buff	*pRxPkt;
-
-	ASSERT(pPacket);
-
-	pRxPkt = RTPKT_TO_OSPKT(pPacket);
-
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-
-    /* Push up the protocol stack */
-#ifdef IKANOS_VX_1X0
-	IKANOS_DataFrameRx(pAd, pRxPkt->dev, pRxPkt, pRxPkt->len);
-#else
-	pRxPkt->protocol = eth_type_trans(pRxPkt, pRxPkt->dev);
-
-//#ifdef CONFIG_5VT_ENHANCE
-//	*(int*)(pRxPkt->cb) = BRIDGE_TAG;
-//#endif
-	netif_rx(pRxPkt);
-#endif // IKANOS_VX_1X0 //
-}
-
-
-PRTMP_SCATTER_GATHER_LIST
-rt_get_sg_list_from_packet(PNDIS_PACKET pPacket, RTMP_SCATTER_GATHER_LIST *sg)
-{
-	sg->NumberOfElements = 1;
-	sg->Elements[0].Address =  GET_OS_PKT_DATAPTR(pPacket);
-	sg->Elements[0].Length = GET_OS_PKT_LEN(pPacket);
-	return (sg);
-}
-
-void hex_dump(char *str, unsigned char *pSrcBufVA, unsigned int SrcBufLen)
-{
-	unsigned char *pt;
-	int x;
-
-	if (RTDebugLevel < RT_DEBUG_TRACE)
-		return;
-
-	pt = pSrcBufVA;
-	printk("%s: %p, len = %d\n",str,  pSrcBufVA, SrcBufLen);
-	for (x=0; x<SrcBufLen; x++)
-	{
-		if (x % 16 == 0)
-			printk("0x%04x : ", x);
-		printk("%02x ", ((unsigned char)pt[x]));
-		if (x%16 == 15) printk("\n");
-	}
-	printk("\n");
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Send log message through wireless event
-
-		Support standard iw_event with IWEVCUSTOM. It is used below.
-
-		iwreq_data.data.flags is used to store event_flag that is defined by user.
-		iwreq_data.data.length is the length of the event log.
-
-		The format of the event log is composed of the entry's MAC address and
-		the desired log message (refer to pWirelessEventText).
-
-			ex: 11:22:33:44:55:66 has associated successfully
-
-		p.s. The requirement of Wireless Extension is v15 or newer.
-
-	========================================================================
-*/
-VOID RTMPSendWirelessEvent(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT			Event_flag,
-	IN	PUCHAR 			pAddr,
-	IN	UCHAR			BssIdx,
-	IN	CHAR			Rssi)
-{
-#if WIRELESS_EXT >= 15
-
-	union 	iwreq_data      wrqu;
-	PUCHAR 	pBuf = NULL, pBufPtr = NULL;
-	USHORT	event, type, BufLen;
-	UCHAR	event_table_len = 0;
-
-	type = Event_flag & 0xFF00;
-	event = Event_flag & 0x00FF;
-
-	switch (type)
-	{
-		case IW_SYS_EVENT_FLAG_START:
-			event_table_len = IW_SYS_EVENT_TYPE_NUM;
-			break;
-
-		case IW_SPOOF_EVENT_FLAG_START:
-			event_table_len = IW_SPOOF_EVENT_TYPE_NUM;
-			break;
-
-		case IW_FLOOD_EVENT_FLAG_START:
-			event_table_len = IW_FLOOD_EVENT_TYPE_NUM;
-			break;
-	}
-
-	if (event_table_len == 0)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("%s : The type(%0x02x) is not valid.\n", __func__, type));
-		return;
-	}
-
-	if (event >= event_table_len)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("%s : The event(%0x02x) is not valid.\n", __func__, event));
-		return;
-	}
-
-	//Allocate memory and copy the msg.
-	if((pBuf = kmalloc(IW_CUSTOM_MAX_LEN, GFP_ATOMIC)) != NULL)
-	{
-		//Prepare the payload
-		memset(pBuf, 0, IW_CUSTOM_MAX_LEN);
-
-		pBufPtr = pBuf;
-
-		if (pAddr)
-			pBufPtr += sprintf(pBufPtr, "(RT2860) STA(%02x:%02x:%02x:%02x:%02x:%02x) ", PRINT_MAC(pAddr));
-		else if (BssIdx < MAX_MBSSID_NUM)
-			pBufPtr += sprintf(pBufPtr, "(RT2860) BSS(ra%d) ", BssIdx);
-		else
-			pBufPtr += sprintf(pBufPtr, "(RT2860) ");
-
-		if (type == IW_SYS_EVENT_FLAG_START)
-			pBufPtr += sprintf(pBufPtr, "%s", pWirelessSysEventText[event]);
-		else if (type == IW_SPOOF_EVENT_FLAG_START)
-			pBufPtr += sprintf(pBufPtr, "%s (RSSI=%d)", pWirelessSpoofEventText[event], Rssi);
-		else if (type == IW_FLOOD_EVENT_FLAG_START)
-			pBufPtr += sprintf(pBufPtr, "%s", pWirelessFloodEventText[event]);
-		else
-			pBufPtr += sprintf(pBufPtr, "%s", "unknown event");
-
-		pBufPtr[pBufPtr - pBuf] = '\0';
-		BufLen = pBufPtr - pBuf;
-
-		memset(&wrqu, 0, sizeof(wrqu));
-	    wrqu.data.flags = Event_flag;
-		wrqu.data.length = BufLen;
-
-		//send wireless event
-	    wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, pBuf);
-
-		//DBGPRINT(RT_DEBUG_TRACE, ("%s : %s\n", __func__, pBuf));
-
-		kfree(pBuf);
-	}
-	else
-		DBGPRINT(RT_DEBUG_ERROR, ("%s : Can't allocate memory for wireless event.\n", __func__));
-#else
-	DBGPRINT(RT_DEBUG_ERROR, ("%s : The Wireless Extension MUST be v15 or newer.\n", __func__));
-#endif  /* WIRELESS_EXT >= 15 */
-}
-
-
-#ifdef CONFIG_STA_SUPPORT
-void send_monitor_packets(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk)
-{
-    struct sk_buff	*pOSPkt;
-    wlan_ng_prism2_header *ph;
-    int rate_index = 0;
-    USHORT header_len = 0;
-    UCHAR temp_header[40] = {0};
-
-    u_int32_t ralinkrate[256] = {2,4,11,22, 12,18,24,36,48,72,96,  108,   109, 110, 111, 112, 13, 26, 39, 52,78,104, 117, 130, 26, 52, 78,104, 156, 208, 234, 260, 27, 54,81,108,162, 216, 243, 270, // Last 38
-	54, 108, 162, 216, 324, 432, 486, 540,  14, 29, 43, 57, 87, 115, 130, 144, 29, 59,87,115, 173, 230,260, 288, 30, 60,90,120,180,240,270,300,60,120,180,240,360,480,540,600, 0,1,2,3,4,5,6,7,8,9,10,
-	11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80};
-
-
-    ASSERT(pRxBlk->pRxPacket);
-    if (pRxBlk->DataSize < 10)
-    {
-        DBGPRINT(RT_DEBUG_ERROR, ("%s : Size is too small! (%d)\n", __func__, pRxBlk->DataSize));
-		goto err_free_sk_buff;
-    }
-
-    if (pRxBlk->DataSize + sizeof(wlan_ng_prism2_header) > RX_BUFFER_AGGRESIZE)
-    {
-        DBGPRINT(RT_DEBUG_ERROR, ("%s : Size is too large! (%zu)\n", __func__, pRxBlk->DataSize + sizeof(wlan_ng_prism2_header)));
-		goto err_free_sk_buff;
-    }
-
-    pOSPkt = RTPKT_TO_OSPKT(pRxBlk->pRxPacket);
-	pOSPkt->dev = get_netdev_from_bssid(pAd, BSS0);
-    if (pRxBlk->pHeader->FC.Type == BTYPE_DATA)
-    {
-        pRxBlk->DataSize -= LENGTH_802_11;
-        if ((pRxBlk->pHeader->FC.ToDs == 1) &&
-            (pRxBlk->pHeader->FC.FrDs == 1))
-            header_len = LENGTH_802_11_WITH_ADDR4;
-        else
-            header_len = LENGTH_802_11;
-
-        // QOS
-    	if (pRxBlk->pHeader->FC.SubType & 0x08)
-    	{
-    	    header_len += 2;
-    		// Data skip QOS contorl field
-    		pRxBlk->DataSize -=2;
-    	}
-
-    	// Order bit: A-Ralink or HTC+
-    	if (pRxBlk->pHeader->FC.Order)
-    	{
-    	    header_len += 4;
-			// Data skip HTC contorl field
-			pRxBlk->DataSize -= 4;
-    	}
-
-        // Copy Header
-        if (header_len <= 40)
-            NdisMoveMemory(temp_header, pRxBlk->pData, header_len);
-
-        // skip HW padding
-    	if (pRxBlk->RxD.L2PAD)
-    	    pRxBlk->pData += (header_len + 2);
-        else
-            pRxBlk->pData += header_len;
-    } //end if
-
-
-	if (pRxBlk->DataSize < pOSPkt->len) {
-        skb_trim(pOSPkt,pRxBlk->DataSize);
-    } else {
-        skb_put(pOSPkt,(pRxBlk->DataSize - pOSPkt->len));
-    } //end if
-
-    if ((pRxBlk->pData - pOSPkt->data) > 0) {
-	    skb_put(pOSPkt,(pRxBlk->pData - pOSPkt->data));
-	    skb_pull(pOSPkt,(pRxBlk->pData - pOSPkt->data));
-    } //end if
-
-    if (skb_headroom(pOSPkt) < (sizeof(wlan_ng_prism2_header)+ header_len)) {
-        if (pskb_expand_head(pOSPkt, (sizeof(wlan_ng_prism2_header) + header_len), 0, GFP_ATOMIC)) {
-	        DBGPRINT(RT_DEBUG_ERROR, ("%s : Reallocate header size of sk_buff fail!\n", __func__));
-			goto err_free_sk_buff;
-	    } //end if
-    } //end if
-
-    if (header_len > 0)
-        NdisMoveMemory(skb_push(pOSPkt, header_len), temp_header, header_len);
-
-    ph = (wlan_ng_prism2_header *) skb_push(pOSPkt, sizeof(wlan_ng_prism2_header));
-	NdisZeroMemory(ph, sizeof(wlan_ng_prism2_header));
-
-    ph->msgcode		    = DIDmsg_lnxind_wlansniffrm;
-	ph->msglen		    = sizeof(wlan_ng_prism2_header);
-	strcpy(ph->devname, pAd->net_dev->name);
-
-    ph->hosttime.did = DIDmsg_lnxind_wlansniffrm_hosttime;
-	ph->hosttime.status = 0;
-	ph->hosttime.len = 4;
-	ph->hosttime.data = jiffies;
-
-	ph->mactime.did = DIDmsg_lnxind_wlansniffrm_mactime;
-	ph->mactime.status = 0;
-	ph->mactime.len = 0;
-	ph->mactime.data = 0;
-
-    ph->istx.did = DIDmsg_lnxind_wlansniffrm_istx;
-	ph->istx.status = 0;
-	ph->istx.len = 0;
-	ph->istx.data = 0;
-
-    ph->channel.did = DIDmsg_lnxind_wlansniffrm_channel;
-	ph->channel.status = 0;
-	ph->channel.len = 4;
-
-    ph->channel.data = (u_int32_t)pAd->CommonCfg.Channel;
-
-    ph->rssi.did = DIDmsg_lnxind_wlansniffrm_rssi;
-	ph->rssi.status = 0;
-	ph->rssi.len = 4;
-    ph->rssi.data = (u_int32_t)RTMPMaxRssi(pAd, ConvertToRssi(pAd, pRxBlk->pRxWI->RSSI0, RSSI_0), ConvertToRssi(pAd, pRxBlk->pRxWI->RSSI1, RSSI_1), ConvertToRssi(pAd, pRxBlk->pRxWI->RSSI2, RSSI_2));;
-
-	ph->signal.did = DIDmsg_lnxind_wlansniffrm_signal;
-	ph->signal.status = 0;
-	ph->signal.len = 4;
-	ph->signal.data = 0; //rssi + noise;
-
-	ph->noise.did = DIDmsg_lnxind_wlansniffrm_noise;
-	ph->noise.status = 0;
-	ph->noise.len = 4;
-	ph->noise.data = 0;
-
-#ifdef DOT11_N_SUPPORT
-    if (pRxBlk->pRxWI->PHYMODE >= MODE_HTMIX)
-    {
-    	rate_index = 16 + ((UCHAR)pRxBlk->pRxWI->BW *16) + ((UCHAR)pRxBlk->pRxWI->ShortGI *32) + ((UCHAR)pRxBlk->pRxWI->MCS);
-    }
-    else
-#endif // DOT11_N_SUPPORT //
-	if (pRxBlk->pRxWI->PHYMODE == MODE_OFDM)
-    	rate_index = (UCHAR)(pRxBlk->pRxWI->MCS) + 4;
-    else
-    	rate_index = (UCHAR)(pRxBlk->pRxWI->MCS);
-    if (rate_index < 0)
-        rate_index = 0;
-    if (rate_index > 255)
-        rate_index = 255;
-
-	ph->rate.did = DIDmsg_lnxind_wlansniffrm_rate;
-	ph->rate.status = 0;
-	ph->rate.len = 4;
-    ph->rate.data = ralinkrate[rate_index];
-
-	ph->frmlen.did = DIDmsg_lnxind_wlansniffrm_frmlen;
-    ph->frmlen.status = 0;
-	ph->frmlen.len = 4;
-	ph->frmlen.data	= (u_int32_t)pRxBlk->DataSize;
-
-
-    pOSPkt->pkt_type = PACKET_OTHERHOST;
-    pOSPkt->protocol = eth_type_trans(pOSPkt, pOSPkt->dev);
-    pOSPkt->ip_summed = CHECKSUM_NONE;
-    netif_rx(pOSPkt);
-
-    return;
-
-err_free_sk_buff:
-	RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
-	return;
-
-}
-#endif // CONFIG_STA_SUPPORT //
-
-
-void rtmp_os_thread_init(PUCHAR pThreadName, PVOID pNotify)
-{
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-	daemonize(pThreadName /*"%s",pAd->net_dev->name*/);
-
-	allow_signal(SIGTERM);
-	allow_signal(SIGKILL);
-	current->flags |= PF_NOFREEZE;
-#else
-	unsigned long flags;
-
-	daemonize();
-	reparent_to_init();
-	strcpy(current->comm, pThreadName);
-
-	siginitsetinv(&current->blocked, sigmask(SIGTERM) | sigmask(SIGKILL));
-
-	/* Allow interception of SIGKILL only
-	 * Don't allow other signals to interrupt the transmission */
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,4,22)
-	spin_lock_irqsave(&current->sigmask_lock, flags);
-	flush_signals(current);
-	recalc_sigpending(current);
-	spin_unlock_irqrestore(&current->sigmask_lock, flags);
-#endif
-#endif
-
-    /* signal that we've started the thread */
-	complete(pNotify);
-
-}
-
-void RTMP_IndicateMediaState(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	if (pAd->CommonCfg.bWirelessEvent)
-	{
-		if (pAd->IndicateMediaState == NdisMediaStateConnected)
-		{
-			RTMPSendWirelessEvent(pAd, IW_STA_LINKUP_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-		}
-		else
-		{
-			RTMPSendWirelessEvent(pAd, IW_STA_LINKDOWN_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-		}
-	}
-}
-
+#include "../rt2860/rt_linux.c"
diff --git a/drivers/staging/rt2870/rt_linux.h b/drivers/staging/rt2870/rt_linux.h
index 5a6ee6ad0e5..b2aeafbd518 100644
--- a/drivers/staging/rt2870/rt_linux.h
+++ b/drivers/staging/rt2870/rt_linux.h
@@ -1,906 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-/***********************************************************************/
-/*                                                                     */
-/*   Program:    rt_linux.c                                            */
-/*   Created:    4/21/2006 1:17:38 PM                                  */
-/*   Author:     Wu Xi-Kun                                             */
-/*   Comments:   `description`                                         */
-/*                                                                     */
-/*---------------------------------------------------------------------*/
-/*                                                                     */
-/* History:                                                            */
-/*    Revision 1.1 4/21/2006 1:17:38 PM  xsikun                        */
-/*    Initial revision                                                 */
-/*                                                                     */
-/***********************************************************************/
-
-#include "rtmp_type.h"
-#include <linux/module.h>
-#include <linux/version.h>
-#include <linux/kernel.h>
-#include <linux/kthread.h>
-
-#include <linux/spinlock.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/ethtool.h>
-#include <linux/wireless.h>
-#include <linux/proc_fs.h>
-#include <linux/delay.h>
-#include <linux/if_arp.h>
-#include <linux/ctype.h>
-#include <linux/vmalloc.h>
-
-
-#include <net/iw_handler.h>
-
-// load firmware
-#define __KERNEL_SYSCALLS__
-#include <linux/unistd.h>
-#include <asm/uaccess.h>
-
-
-#define MEM_ALLOC_FLAG      (GFP_ATOMIC) //(GFP_DMA | GFP_ATOMIC)
-
-#ifndef IFNAMSIZ
-#define IFNAMSIZ 16
-#endif
-
-//#define CONFIG_CKIP_SUPPORT
-
-#undef __inline
-#define __inline	   static inline
-
-typedef int (*HARD_START_XMIT_FUNC)(struct sk_buff *skb, struct net_device *net_dev);
-
-// add by kathy
-
-#ifdef CONFIG_STA_SUPPORT
-
-#ifdef RT2870
-#define STA_PROFILE_PATH			"/etc/Wireless/RT2870STA/RT2870STA.dat"
-#define STA_RT2870_IMAGE_FILE_NAME  "/etc/Wireless/RT2870STA/rt2870.bin"
-#define STA_NIC_DEVICE_NAME			"RT2870STA"
-#define STA_DRIVER_VERSION			"1.4.0.0"
-#ifdef MULTIPLE_CARD_SUPPORT
-#define CARD_INFO_PATH			"/etc/Wireless/RT2870STA/RT2870STACard.dat"
-#endif // MULTIPLE_CARD_SUPPORT //
-#endif // RT2870 //
-
-#endif // CONFIG_STA_SUPPORT //
-
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-
-#define RTMP_TIME_AFTER(a,b)		\
-	(typecheck(unsigned long, (unsigned long)a) && \
-	 typecheck(unsigned long, (unsigned long)b) && \
-	 ((long)(b) - (long)(a) < 0))
-
-#define RTMP_TIME_AFTER_EQ(a,b)	\
-	(typecheck(unsigned long, (unsigned long)a) && \
-	 typecheck(unsigned long, (unsigned long)b) && \
-	 ((long)(a) - (long)(b) >= 0))
-#define RTMP_TIME_BEFORE(a,b)	RTMP_TIME_AFTER_EQ(b,a)
-#else
-#define RTMP_TIME_AFTER(a,b) time_after(a, b)
-#endif
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-#define RT_MOD_INC_USE_COUNT() \
-	if (!try_module_get(THIS_MODULE)) \
-	{ \
-		DBGPRINT(RT_DEBUG_ERROR, ("%s: cannot reserve module\n", __func__)); \
-		return -1; \
-	}
-
-#define RT_MOD_DEC_USE_COUNT() module_put(THIS_MODULE);
-#else
-#define RT_MOD_INC_USE_COUNT()	MOD_INC_USE_COUNT;
-#define RT_MOD_DEC_USE_COUNT() MOD_DEC_USE_COUNT;
-#endif
-
-#define OS_HZ			HZ
-
-#define ETH_LENGTH_OF_ADDRESS	6
-
-#define IN
-#define OUT
-
-#define NDIS_STATUS                             INT
-#define NDIS_STATUS_SUCCESS                     0x00
-#define NDIS_STATUS_FAILURE                     0x01
-#define NDIS_STATUS_INVALID_DATA				0x02
-#define NDIS_STATUS_RESOURCES                   0x03
-
-#define MIN_NET_DEVICE_FOR_AID			0x00		//0x00~0x3f
-#define MIN_NET_DEVICE_FOR_MBSSID		0x00		//0x00,0x10,0x20,0x30
-#define MIN_NET_DEVICE_FOR_WDS			0x10		//0x40,0x50,0x60,0x70
-#define MIN_NET_DEVICE_FOR_APCLI		0x20
-#define MIN_NET_DEVICE_FOR_MESH			0x30
-#ifdef CONFIG_STA_SUPPORT
-#define MIN_NET_DEVICE_FOR_DLS			0x40
-#endif // CONFIG_STA_SUPPORT //
-
-
-#ifdef CONFIG_STA_SUPPORT
-#define NDIS_PACKET_TYPE_DIRECTED		0
-#define NDIS_PACKET_TYPE_MULTICAST		1
-#define NDIS_PACKET_TYPE_BROADCAST		2
-#define NDIS_PACKET_TYPE_ALL_MULTICAST	3
-#endif // CONFIG_STA_SUPPORT //
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
-typedef	struct pid *	THREAD_PID;
-#define	GET_PID(_v)	find_get_pid(_v)
-#define	GET_PID_NUMBER(_v)	pid_nr(_v)
-#define CHECK_PID_LEGALITY(_pid)	if (pid_nr(_pid) >= 0)
-#define KILL_THREAD_PID(_A, _B, _C)	kill_pid(_A, _B, _C)
-#else
-typedef	pid_t	THREAD_PID;
-#define	GET_PID(_v)	_v
-#define	GET_PID_NUMBER(_v)	_v
-#define CHECK_PID_LEGALITY(_pid)	if (_pid >= 0)
-#define KILL_THREAD_PID(_A, _B, _C)	kill_proc(_A, _B, _C)
-#endif
-
-struct os_lock  {
-	spinlock_t		lock;
-	unsigned long  	flags;
-};
-
-
-struct os_cookie {
-
-#ifdef RT2870
-	struct usb_device	*pUsb_Dev;
-
-	struct task_struct	*MLMEThr_task;
-	struct task_struct	*RTUSBCmdThr_task;
-	struct task_struct	*TimerQThr_task;
-#endif // RT2870 //
-
-	struct tasklet_struct 	rx_done_task;
-	struct tasklet_struct 	mgmt_dma_done_task;
-	struct tasklet_struct 	ac0_dma_done_task;
-	struct tasklet_struct 	ac1_dma_done_task;
-	struct tasklet_struct 	ac2_dma_done_task;
-	struct tasklet_struct 	ac3_dma_done_task;
-	struct tasklet_struct 	hcca_dma_done_task;
-	struct tasklet_struct	tbtt_task;
-#ifdef RT2870
-	struct tasklet_struct	null_frame_complete_task;
-	struct tasklet_struct	rts_frame_complete_task;
-	struct tasklet_struct	pspoll_frame_complete_task;
-#endif // RT2870 //
-
-
-	unsigned long			apd_pid; //802.1x daemon pid
-	INT						ioctl_if_type;
-	INT 					ioctl_if;
-};
-
-typedef struct _VIRTUAL_ADAPTER
-{
-	struct net_device		*RtmpDev;
-	struct net_device		*VirtualDev;
-} VIRTUAL_ADAPTER, PVIRTUAL_ADAPTER;
-
-#undef  ASSERT
-#define ASSERT(x)                                                               \
-{                                                                               \
-    if (!(x))                                                                   \
-    {                                                                           \
-        printk(KERN_WARNING __FILE__ ":%d assert " #x "failed\n", __LINE__);    \
-    }                                                                           \
-}
-
-typedef struct os_cookie	* POS_COOKIE;
-typedef struct pci_dev 		* PPCI_DEV;
-typedef struct net_device	* PNET_DEV;
-typedef void				* PNDIS_PACKET;
-typedef char				NDIS_PACKET;
-typedef PNDIS_PACKET		* PPNDIS_PACKET;
-typedef	dma_addr_t			NDIS_PHYSICAL_ADDRESS;
-typedef	dma_addr_t			* PNDIS_PHYSICAL_ADDRESS;
-//typedef struct timer_list	RALINK_TIMER_STRUCT;
-//typedef struct timer_list	* PRALINK_TIMER_STRUCT;
-//typedef struct os_lock		NDIS_SPIN_LOCK;
-typedef spinlock_t			NDIS_SPIN_LOCK;
-typedef struct timer_list	NDIS_MINIPORT_TIMER;
-typedef void				* NDIS_HANDLE;
-typedef char 				* PNDIS_BUFFER;
-
-
-
-void hex_dump(char *str, unsigned char *pSrcBufVA, unsigned int SrcBufLen);
-
-dma_addr_t linux_pci_map_single(void *handle, void *ptr, size_t size, int sd_idx, int direction);
-void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size, int direction);
-
-
-////////////////////////////////////////
-// MOVE TO rtmp.h ?
-/////////////////////////////////////////
-#define PKTSRC_NDIS             0x7f
-#define PKTSRC_DRIVER           0x0f
-#define PRINT_MAC(addr)	\
-	addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]
-
-
-#define RT2860_PCI_DEVICE_ID		0x0601
-
-
-#ifdef RT2870
-#define PCI_MAP_SINGLE(_handle, _ptr, _size, _dir) (ULONG)0
-
-#define PCI_UNMAP_SINGLE(_handle, _ptr, _size, _dir)
-#endif // RT2870 //
-
-
-#define BEACON_FRAME_DMA_CACHE_WBACK(_ptr, _size)	\
-	dma_cache_wback(_ptr, _size)
-
-
-//////////////////////////////////////////
-//
-//////////////////////////////////////////
-
-
-#define NdisMIndicateStatus(_w, _x, _y, _z)
-
-typedef struct timer_list	RTMP_OS_TIMER;
-
-#ifdef RT2870
-/* ----------------- Timer Related MARCO ---------------*/
-// In RT2870, we have a lot of timer functions and will read/write register, it's
-//	not allowed in Linux USB sub-system to do it ( because of sleep issue when submit
-//  to ctrl pipe). So we need a wrapper function to take care it.
-
-typedef VOID (*RT2870_TIMER_HANDLE)(
-	IN  PVOID   SystemSpecific1,
-	IN  PVOID   FunctionContext,
-	IN  PVOID   SystemSpecific2,
-	IN  PVOID   SystemSpecific3);
-#endif // RT2870 //
-
-
-typedef struct  _RALINK_TIMER_STRUCT    {
-    RTMP_OS_TIMER		TimerObj;       // Ndis Timer object
-	BOOLEAN				Valid;			// Set to True when call RTMPInitTimer
-    BOOLEAN             State;          // True if timer cancelled
-    BOOLEAN	      		PeriodicType;	// True if timer is periodic timer
-    BOOLEAN             Repeat;         // True if periodic timer
-    ULONG               TimerValue;     // Timer value in milliseconds
-	ULONG				cookie;			// os specific object
-#ifdef RT2870
-	RT2870_TIMER_HANDLE	handle;
-	void				*pAd;
-#endif // RT2870 //
-}   RALINK_TIMER_STRUCT, *PRALINK_TIMER_STRUCT;
-
-
-#ifdef RT2870
-
-typedef enum _RT2870_KERNEL_THREAD_STATUS_
-{
-	RT2870_THREAD_UNKNOWN = 0,
-	RT2870_THREAD_INITED = 1,
-	RT2870_THREAD_RUNNING = 2,
-	RT2870_THREAD_STOPED = 4,
-}RT2870_KERNEL_THREAD_STATUS;
-
-#define RT2870_THREAD_CAN_DO_INSERT		(RT2870_THREAD_INITED |RT2870_THREAD_RUNNING)
-
-typedef struct _RT2870_TIMER_ENTRY_
-{
-	RALINK_TIMER_STRUCT 			*pRaTimer;
-	struct _RT2870_TIMER_ENTRY_ 	*pNext;
-}RT2870_TIMER_ENTRY;
-
-
-#define TIMER_QUEUE_SIZE_MAX	128
-typedef struct _RT2870_TIMER_QUEUE_
-{
-	unsigned int		status;
-	//wait_queue_head_t 	timerWaitQ;
-	//atomic_t			count;
-	UCHAR				*pTimerQPoll;
-	RT2870_TIMER_ENTRY	*pQPollFreeList;
-	RT2870_TIMER_ENTRY 	*pQHead;
-	RT2870_TIMER_ENTRY 	*pQTail;
-}RT2870_TIMER_QUEUE;
-#endif // RT2870 //
-
-
-//#define DBG	1
-
-//
-//  MACRO for debugging information
-//
-
-#ifdef DBG
-extern ULONG    RTDebugLevel;
-
-#define DBGPRINT_RAW(Level, Fmt)    \
-{                                   \
-    if (Level <= RTDebugLevel)      \
-    {                               \
-        printk Fmt;               \
-    }                               \
-}
-
-#define DBGPRINT(Level, Fmt)    DBGPRINT_RAW(Level, Fmt)
-
-
-#define DBGPRINT_ERR(Fmt)           \
-{                                   \
-    printk("ERROR!!! ");          \
-    printk Fmt;                  \
-}
-
-#define DBGPRINT_S(Status, Fmt)		\
-{									\
-	printk Fmt;					\
-}
-
-
-#else
-#define DBGPRINT(Level, Fmt)
-#define DBGPRINT_RAW(Level, Fmt)
-#define DBGPRINT_S(Status, Fmt)
-#define DBGPRINT_ERR(Fmt)
-#endif
-
-
-//
-//  spin_lock enhanced for Nested spin lock
-//
-#define NdisAllocateSpinLock(__lock)      \
-{                                       \
-    spin_lock_init((spinlock_t *)(__lock));               \
-}
-
-#define NdisFreeSpinLock(lock)          \
-{                                       \
-}
-
-
-#define RTMP_SEM_LOCK(__lock)					\
-{												\
-	spin_lock_bh((spinlock_t *)(__lock));				\
-}
-
-#define RTMP_SEM_UNLOCK(__lock)					\
-{												\
-	spin_unlock_bh((spinlock_t *)(__lock));				\
-}
-
-#if 0 // sample, IRQ LOCK
-#define RTMP_IRQ_LOCK(__lock, __irqflags)					\
-{													\
-	spin_lock_irqsave((spinlock_t *)__lock, __irqflags);	\
-	pAd->irq_disabled |= 1; \
-}
-
-#define RTMP_IRQ_UNLOCK(__lock, __irqflag)						\
-{														\
-	pAd->irq_disabled &= 0; \
-	spin_unlock_irqrestore((spinlock_t *)(__lock), ((unsigned long)__irqflag));	\
-}
-#else
-
-// sample, use semaphore lock to replace IRQ lock, 2007/11/15
-#define RTMP_IRQ_LOCK(__lock, __irqflags)			\
-{													\
-	__irqflags = 0;									\
-	spin_lock_bh((spinlock_t *)(__lock));			\
-	pAd->irq_disabled |= 1; \
-}
-
-#define RTMP_IRQ_UNLOCK(__lock, __irqflag)			\
-{													\
-	pAd->irq_disabled &= 0; \
-	spin_unlock_bh((spinlock_t *)(__lock));			\
-}
-
-#define RTMP_INT_LOCK(__lock, __irqflags)			\
-{													\
-	spin_lock_irqsave((spinlock_t *)__lock, __irqflags);	\
-}
-
-#define RTMP_INT_UNLOCK(__lock, __irqflag)			\
-{													\
-	spin_unlock_irqrestore((spinlock_t *)(__lock), ((unsigned long)__irqflag));	\
-}
-#endif
-
-
-
-#ifdef RT2870
-//Patch for ASIC turst read/write bug, needs to remove after metel fix
-#define RTMP_IO_READ32(_A, _R, _pV)								\
-	RTUSBReadMACRegister(_A, _R, _pV)
-
-#define RTMP_IO_READ8(_A, _R, _pV)								\
-{																\
-}
-
-#define RTMP_IO_WRITE32(_A, _R, _V)								\
-	RTUSBWriteMACRegister(_A, _R, _V)
-
-
-#define RTMP_IO_WRITE8(_A, _R, _V)								\
-{																\
-	USHORT	_Val = _V;											\
-	RTUSBSingleWrite(_A, _R, _Val);								\
-}
-
-
-#define RTMP_IO_WRITE16(_A, _R, _V)								\
-{																\
-	RTUSBSingleWrite(_A, _R, _V);								\
-}
-#endif // RT2870 //
-
-#ifndef wait_event_interruptible_timeout
-#define __wait_event_interruptible_timeout(wq, condition, ret) \
-do { \
-        wait_queue_t __wait; \
-        init_waitqueue_entry(&__wait, current); \
-        add_wait_queue(&wq, &__wait); \
-        for (;;) { \
-                set_current_state(TASK_INTERRUPTIBLE); \
-                if (condition) \
-                        break; \
-                if (!signal_pending(current)) { \
-                        ret = schedule_timeout(ret); \
-                        if (!ret) \
-                                break; \
-                        continue; \
-                } \
-                ret = -ERESTARTSYS; \
-                break; \
-        } \
-        current->state = TASK_RUNNING; \
-        remove_wait_queue(&wq, &__wait); \
-} while (0)
-
-#define wait_event_interruptible_timeout(wq, condition, timeout) \
-({ \
-        long __ret = timeout; \
-        if (!(condition)) \
-                __wait_event_interruptible_timeout(wq, condition, __ret); \
-        __ret; \
-})
-#endif
-#define ONE_TICK 1
-#define OS_WAIT(_time) \
-{	int _i; \
-	long _loop = ((_time)/(1000/OS_HZ)) > 0 ? ((_time)/(1000/OS_HZ)) : 1;\
-	wait_queue_head_t _wait; \
-	init_waitqueue_head(&_wait); \
-	for (_i=0; _i<(_loop); _i++) \
-		wait_event_interruptible_timeout(_wait, 0, ONE_TICK); }
-
-
-typedef void (*TIMER_FUNCTION)(unsigned long);
-
-#define COPY_MAC_ADDR(Addr1, Addr2)             memcpy((Addr1), (Addr2), MAC_ADDR_LEN)
-
-#define MlmeAllocateMemory(_pAd, _ppVA) os_alloc_mem(_pAd, _ppVA, MGMT_DMA_BUFFER_SIZE)
-#define MlmeFreeMemory(_pAd, _pVA)     os_free_mem(_pAd, _pVA)
-
-
-#ifdef RT2870
-#define BUILD_TIMER_FUNCTION(_func)													\
-void linux_##_func(unsigned long data)												\
-{																					\
-	PRALINK_TIMER_STRUCT	_pTimer = (PRALINK_TIMER_STRUCT)data;					\
-	RT2870_TIMER_ENTRY		*_pQNode;												\
-	RTMP_ADAPTER			*_pAd;													\
-																				\
-	_pTimer->handle = _func;															\
-	_pAd = (RTMP_ADAPTER *)_pTimer->pAd;												\
-	_pQNode = RT2870_TimerQ_Insert(_pAd, _pTimer); 									\
-	if ((_pQNode == NULL) && (_pAd->TimerQ.status & RT2870_THREAD_CAN_DO_INSERT))	\
-		RTMP_OS_Add_Timer(&_pTimer->TimerObj, HZ);               					\
-}
-#endif // RT2870 //
-
-
-#define DECLARE_TIMER_FUNCTION(_func)			\
-void linux_##_func(unsigned long data)
-
-#define GET_TIMER_FUNCTION(_func)				\
-		linux_##_func
-
-DECLARE_TIMER_FUNCTION(MlmePeriodicExec);
-DECLARE_TIMER_FUNCTION(MlmeRssiReportExec);
-DECLARE_TIMER_FUNCTION(AsicRxAntEvalTimeout);
-DECLARE_TIMER_FUNCTION(APSDPeriodicExec);
-DECLARE_TIMER_FUNCTION(AsicRfTuningExec);
-#ifdef RT2870
-DECLARE_TIMER_FUNCTION(BeaconUpdateExec);
-#endif // RT2870 //
-
-
-#ifdef CONFIG_STA_SUPPORT
-DECLARE_TIMER_FUNCTION(BeaconTimeout);
-DECLARE_TIMER_FUNCTION(ScanTimeout);
-DECLARE_TIMER_FUNCTION(AuthTimeout);
-DECLARE_TIMER_FUNCTION(AssocTimeout);
-DECLARE_TIMER_FUNCTION(ReassocTimeout);
-DECLARE_TIMER_FUNCTION(DisassocTimeout);
-DECLARE_TIMER_FUNCTION(LinkDownExec);
-#ifdef LEAP_SUPPORT
-DECLARE_TIMER_FUNCTION(LeapAuthTimeout);
-#endif
-DECLARE_TIMER_FUNCTION(StaQuickResponeForRateUpExec);
-DECLARE_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc);
-DECLARE_TIMER_FUNCTION(PsPollWakeExec);
-DECLARE_TIMER_FUNCTION(RadioOnExec);
-
-#ifdef QOS_DLS_SUPPORT
-DECLARE_TIMER_FUNCTION(DlsTimeoutAction);
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
-void RTMP_GetCurrentSystemTime(LARGE_INTEGER *time);
-
-
-/*
- * packet helper
- * 	- convert internal rt packet to os packet or
- *             os packet to rt packet
- */
-#define RTPKT_TO_OSPKT(_p)		((struct sk_buff *)(_p))
-#define OSPKT_TO_RTPKT(_p)		((PNDIS_PACKET)(_p))
-
-#define GET_OS_PKT_DATAPTR(_pkt) \
-		(RTPKT_TO_OSPKT(_pkt)->data)
-
-#define GET_OS_PKT_LEN(_pkt) \
-		(RTPKT_TO_OSPKT(_pkt)->len)
-
-#define GET_OS_PKT_DATATAIL(_pkt) \
-		(RTPKT_TO_OSPKT(_pkt)->tail)
-
-#define GET_OS_PKT_HEAD(_pkt) \
-		(RTPKT_TO_OSPKT(_pkt)->head)
-
-#define GET_OS_PKT_END(_pkt) \
-		(RTPKT_TO_OSPKT(_pkt)->end)
-
-#define GET_OS_PKT_NETDEV(_pkt) \
-		(RTPKT_TO_OSPKT(_pkt)->dev)
-
-#define GET_OS_PKT_TYPE(_pkt) \
-		(RTPKT_TO_OSPKT(_pkt))
-
-#define GET_OS_PKT_NEXT(_pkt) \
-		(RTPKT_TO_OSPKT(_pkt)->next)
-
-
-#define OS_NTOHS(_Val) \
-		(ntohs(_Val))
-#define OS_HTONS(_Val) \
-		(htons(_Val))
-#define OS_NTOHL(_Val) \
-		(ntohl(_Val))
-#define OS_HTONL(_Val) \
-		(htonl(_Val))
-
-/* statistics counter */
-#define STATS_INC_RX_PACKETS(_pAd, _dev)
-#define STATS_INC_TX_PACKETS(_pAd, _dev)
-
-#define STATS_INC_RX_BYTESS(_pAd, _dev, len)
-#define STATS_INC_TX_BYTESS(_pAd, _dev, len)
-
-#define STATS_INC_RX_ERRORS(_pAd, _dev)
-#define STATS_INC_TX_ERRORS(_pAd, _dev)
-
-#define STATS_INC_RX_DROPPED(_pAd, _dev)
-#define STATS_INC_TX_DROPPED(_pAd, _dev)
-
-
-#define CB_OFF  10
-
-
-//   check DDK NDIS_PACKET data structure and find out only MiniportReservedEx[0..7] can be used by our driver without
-//   ambiguity. Fields after pPacket->MiniportReservedEx[8] may be used by other wrapper layer thus crashes the driver
-//
-//#define RTMP_GET_PACKET_MR(_p)			(RTPKT_TO_OSPKT(_p))
-
-// User Priority
-#define RTMP_SET_PACKET_UP(_p, _prio)			(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+0] = _prio)
-#define RTMP_GET_PACKET_UP(_p)					(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+0])
-
-// Fragment #
-#define RTMP_SET_PACKET_FRAGMENTS(_p, _num)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+1] = _num)
-#define RTMP_GET_PACKET_FRAGMENTS(_p)			(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+1])
-
-// 0x0 ~0x7f: TX to AP's own BSS which has the specified AID. if AID>127, set bit 7 in RTMP_SET_PACKET_EMACTAB too.
-//(this value also as MAC(on-chip WCID) table index)
-// 0x80~0xff: TX to a WDS link. b0~6: WDS index
-#define RTMP_SET_PACKET_WCID(_p, _wdsidx)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+2] = _wdsidx)
-#define RTMP_GET_PACKET_WCID(_p)          		((UCHAR)(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+2]))
-
-// 0xff: PKTSRC_NDIS, others: local TX buffer index. This value affects how to a packet
-#define RTMP_SET_PACKET_SOURCE(_p, _pktsrc)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+3] = _pktsrc)
-#define RTMP_GET_PACKET_SOURCE(_p)       		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+3])
-
-// RTS/CTS-to-self protection method
-#define RTMP_SET_PACKET_RTS(_p, _num)      		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+4] = _num)
-#define RTMP_GET_PACKET_RTS(_p)          		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+4])
-// see RTMP_S(G)ET_PACKET_EMACTAB
-
-// TX rate index
-#define RTMP_SET_PACKET_TXRATE(_p, _rate)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+5] = _rate)
-#define RTMP_GET_PACKET_TXRATE(_p)		  		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+5])
-
-// From which Interface
-#define RTMP_SET_PACKET_IF(_p, _ifdx)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+6] = _ifdx)
-#define RTMP_GET_PACKET_IF(_p)		  		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+6])
-#define RTMP_SET_PACKET_NET_DEVICE_MBSSID(_p, _bss)		RTMP_SET_PACKET_IF((_p), (_bss))
-#define RTMP_SET_PACKET_NET_DEVICE_WDS(_p, _bss)		RTMP_SET_PACKET_IF((_p), ((_bss) + MIN_NET_DEVICE_FOR_WDS))
-#define RTMP_SET_PACKET_NET_DEVICE_APCLI(_p, _idx)   	RTMP_SET_PACKET_IF((_p), ((_idx) + MIN_NET_DEVICE_FOR_APCLI))
-#define RTMP_SET_PACKET_NET_DEVICE_MESH(_p, _idx)   	RTMP_SET_PACKET_IF((_p), ((_idx) + MIN_NET_DEVICE_FOR_MESH))
-#define RTMP_GET_PACKET_NET_DEVICE_MBSSID(_p)			RTMP_GET_PACKET_IF((_p))
-#define RTMP_GET_PACKET_NET_DEVICE(_p)					RTMP_GET_PACKET_IF((_p))
-
-#define RTMP_SET_PACKET_MOREDATA(_p, _morebit)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+7] = _morebit)
-#define RTMP_GET_PACKET_MOREDATA(_p)				(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+7])
-
-//#define RTMP_SET_PACKET_NET_DEVICE_MBSSID(_p, _bss)	(RTPKT_TO_OSPKT(_p)->cb[8] = _bss)
-//#define RTMP_GET_PACKET_NET_DEVICE_MBSSID(_p)		(RTPKT_TO_OSPKT(_p)->cb[8])
-
-
-
-
-#if 0
-//#define RTMP_SET_PACKET_DHCP(_p, _flg)   	(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] = _flg)
-//#define RTMP_GET_PACKET_DHCP(_p)         	(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11])
-#else
-//
-//	Sepcific Pakcet Type definition
-//
-#define RTMP_PACKET_SPECIFIC_CB_OFFSET	11
-
-#define RTMP_PACKET_SPECIFIC_DHCP		0x01
-#define RTMP_PACKET_SPECIFIC_EAPOL		0x02
-#define RTMP_PACKET_SPECIFIC_IPV4		0x04
-#define RTMP_PACKET_SPECIFIC_WAI		0x08
-#define RTMP_PACKET_SPECIFIC_VLAN		0x10
-#define RTMP_PACKET_SPECIFIC_LLCSNAP	0x20
-
-//Specific
-#define RTMP_SET_PACKET_SPECIFIC(_p, _flg)	   	(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] = _flg)
-
-//DHCP
-#define RTMP_SET_PACKET_DHCP(_p, _flg)   													\
-			do{																				\
-				if (_flg)																	\
-					(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) |= (RTMP_PACKET_SPECIFIC_DHCP);		\
-				else																		\
-					(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) &= (!RTMP_PACKET_SPECIFIC_DHCP);	\
-			}while(0)
-#define RTMP_GET_PACKET_DHCP(_p)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_DHCP)
-
-//EAPOL
-#define RTMP_SET_PACKET_EAPOL(_p, _flg)   													\
-			do{																				\
-				if (_flg)																	\
-					(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) |= (RTMP_PACKET_SPECIFIC_EAPOL);		\
-				else																		\
-					(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) &= (!RTMP_PACKET_SPECIFIC_EAPOL);	\
-			}while(0)
-#define RTMP_GET_PACKET_EAPOL(_p)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_EAPOL)
-
-//WAI
-#define RTMP_SET_PACKET_WAI(_p, _flg)   													\
-			do{																				\
-				if (_flg)																	\
-					(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) |= (RTMP_PACKET_SPECIFIC_WAI);		\
-				else																		\
-					(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) &= (!RTMP_PACKET_SPECIFIC_WAI);	\
-			}while(0)
-#define RTMP_GET_PACKET_WAI(_p)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_WAI)
-
-#define RTMP_GET_PACKET_LOWRATE(_p)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & (RTMP_PACKET_SPECIFIC_EAPOL | RTMP_PACKET_SPECIFIC_DHCP | RTMP_PACKET_SPECIFIC_WAI))
-
-//VLAN
-#define RTMP_SET_PACKET_VLAN(_p, _flg)   													\
-			do{																				\
-				if (_flg)																	\
-					(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) |= (RTMP_PACKET_SPECIFIC_VLAN);		\
-				else																		\
-					(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) &= (!RTMP_PACKET_SPECIFIC_VLAN);	\
-			}while(0)
-#define RTMP_GET_PACKET_VLAN(_p)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_VLAN)
-
-//LLC/SNAP
-#define RTMP_SET_PACKET_LLCSNAP(_p, _flg)   													\
-			do{																				\
-				if (_flg)																	\
-					(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) |= (RTMP_PACKET_SPECIFIC_LLCSNAP);		\
-				else																		\
-					(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) &= (!RTMP_PACKET_SPECIFIC_LLCSNAP);		\
-			}while(0)
-
-#define RTMP_GET_PACKET_LLCSNAP(_p)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_LLCSNAP)
-
-// IP
-#define RTMP_SET_PACKET_IPV4(_p, _flg)														\
-			do{																				\
-				if (_flg)																	\
-					(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) |= (RTMP_PACKET_SPECIFIC_IPV4);		\
-				else																		\
-					(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) &= (!RTMP_PACKET_SPECIFIC_IPV4);	\
-			}while(0)
-
-#define RTMP_GET_PACKET_IPV4(_p)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_IPV4)
-
-#endif
-
-
-// If this flag is set, it indicates that this EAPoL frame MUST be clear.
-#define RTMP_SET_PACKET_CLEAR_EAP_FRAME(_p, _flg)   (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+12] = _flg)
-#define RTMP_GET_PACKET_CLEAR_EAP_FRAME(_p)         (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+12])
-
-#define RTMP_SET_PACKET_5VT(_p, _flg)   (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+22] = _flg)
-#define RTMP_GET_PACKET_5VT(_p)         (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+22])
-
-
-#ifdef CONFIG_5VT_ENHANCE
-#define BRIDGE_TAG 0x35564252    // depends on 5VT define in br_input.c
-#endif
-
-
-#define NDIS_SET_PACKET_STATUS(_p, _status)
-
-
-#define GET_SG_LIST_FROM_PACKET(_p, _sc)	\
-    rt_get_sg_list_from_packet(_p, _sc)
-
-
-#define NdisMoveMemory(Destination, Source, Length) memmove(Destination, Source, Length)
-#define NdisZeroMemory(Destination, Length)         memset(Destination, 0, Length)
-#define NdisFillMemory(Destination, Length, Fill)   memset(Destination, Fill, Length)
-#define NdisEqualMemory(Source1, Source2, Length)   (!memcmp(Source1, Source2, Length))
-#define RTMPEqualMemory(Source1, Source2, Length)	(!memcmp(Source1, Source2, Length))
-
-
-#define RTMP_INC_REF(_A)		0
-#define RTMP_DEC_REF(_A)		0
-#define RTMP_GET_REF(_A)		0
-
-
-
-/*
- * ULONG
- * RTMP_GetPhysicalAddressLow(
- *   IN NDIS_PHYSICAL_ADDRESS  PhysicalAddress);
- */
-#define RTMP_GetPhysicalAddressLow(PhysicalAddress)		(PhysicalAddress)
-
-/*
- * ULONG
- * RTMP_GetPhysicalAddressHigh(
- *   IN NDIS_PHYSICAL_ADDRESS  PhysicalAddress);
- */
-#define RTMP_GetPhysicalAddressHigh(PhysicalAddress)		(0)
-
-/*
- * VOID
- * RTMP_SetPhysicalAddressLow(
- *   IN NDIS_PHYSICAL_ADDRESS  PhysicalAddress,
- *   IN ULONG  Value);
- */
-#define RTMP_SetPhysicalAddressLow(PhysicalAddress, Value)	\
-			PhysicalAddress = Value;
-
-/*
- * VOID
- * RTMP_SetPhysicalAddressHigh(
- *   IN NDIS_PHYSICAL_ADDRESS  PhysicalAddress,
- *   IN ULONG  Value);
- */
-#define RTMP_SetPhysicalAddressHigh(PhysicalAddress, Value)
-
-
-//CONTAINING_RECORD(pEntry, NDIS_PACKET, MiniportReservedEx);
-#define QUEUE_ENTRY_TO_PACKET(pEntry) \
-	(PNDIS_PACKET)(pEntry)
-
-#define PACKET_TO_QUEUE_ENTRY(pPacket) \
-	(PQUEUE_ENTRY)(pPacket)
-
-
-#ifndef CONTAINING_RECORD
-#define CONTAINING_RECORD(address, type, field)			\
-((type *)((PCHAR)(address) - offsetof(type, field)))
-#endif
-
-
-#define RELEASE_NDIS_PACKET(_pAd, _pPacket, _Status)                    \
-{                                                                       \
-        RTMPFreeNdisPacket(_pAd, _pPacket);                             \
-}
-
-
-#define SWITCH_PhyAB(_pAA, _pBB)    \
-{                                                                           \
-    ULONG	AABasePaHigh;                           \
-    ULONG	AABasePaLow;                           \
-    ULONG	BBBasePaHigh;                           \
-    ULONG	BBBasePaLow;                           \
-    BBBasePaHigh = RTMP_GetPhysicalAddressHigh(_pBB);                                                 \
-    BBBasePaLow = RTMP_GetPhysicalAddressLow(_pBB);                                                 \
-    AABasePaHigh = RTMP_GetPhysicalAddressHigh(_pAA);                                                 \
-    AABasePaLow = RTMP_GetPhysicalAddressLow(_pAA);                                                 \
-    RTMP_SetPhysicalAddressHigh(_pAA, BBBasePaHigh);                                                 \
-    RTMP_SetPhysicalAddressLow(_pAA, BBBasePaLow);                                                 \
-    RTMP_SetPhysicalAddressHigh(_pBB, AABasePaHigh);                                                 \
-    RTMP_SetPhysicalAddressLow(_pBB, AABasePaLow);                                                 \
-}
-
-
-#define NdisWriteErrorLogEntry(_a, _b, _c, _d)
-#define NdisMAllocateMapRegisters(_a, _b, _c, _d, _e)		NDIS_STATUS_SUCCESS
-
-
-#define NdisAcquireSpinLock		RTMP_SEM_LOCK
-#define NdisReleaseSpinLock		RTMP_SEM_UNLOCK
-
-static inline void NdisGetSystemUpTime(ULONG *time)
-{
-	*time = jiffies;
-}
-
-//pPacket = CONTAINING_RECORD(pEntry, NDIS_PACKET, MiniportReservedEx);
-#define QUEUE_ENTRY_TO_PKT(pEntry) \
-		((PNDIS_PACKET) (pEntry))
-
-int rt28xx_packet_xmit(struct sk_buff *skb);
-
-
-
-void rtmp_os_thread_init(PUCHAR pThreadName, PVOID pNotify);
-
-
+#include "../rt2860/rt_linux.h"
diff --git a/drivers/staging/rt2870/rt_main_dev.c b/drivers/staging/rt2870/rt_main_dev.c
index 48ad41136d0..121e1636017 100644
--- a/drivers/staging/rt2870/rt_main_dev.c
+++ b/drivers/staging/rt2870/rt_main_dev.c
@@ -1,1865 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-    rt_main_dev.c
-
-    Abstract:
-    Create and register network interface.
-
-    Revision History:
-    Who         When            What
-    --------    ----------      ----------------------------------------------
-	Sample		Mar/21/07		Merge RT2870 and RT2860 drivers.
-*/
-
-#include "rt_config.h"
-
-#define FORTY_MHZ_INTOLERANT_INTERVAL	(60*1000) // 1 min
-
-#ifdef MULTIPLE_CARD_SUPPORT
-// record whether the card in the card list is used in the card file
-UINT8  MC_CardUsed[MAX_NUM_OF_MULTIPLE_CARD];
-// record used card mac address in the card list
-static UINT8  MC_CardMac[MAX_NUM_OF_MULTIPLE_CARD][6];
-#endif // MULTIPLE_CARD_SUPPORT //
-
-/*---------------------------------------------------------------------*/
-/* Private Variables Used                                              */
-/*---------------------------------------------------------------------*/
-//static RALINK_TIMER_STRUCT     PeriodicTimer;
-
-char *mac = "";		   // default 00:00:00:00:00:00
-char *hostname = "";
-#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,12)
-MODULE_PARM (mac, "s");
-#else
-module_param (mac, charp, 0);
-#endif
-MODULE_PARM_DESC (mac, "rt28xx: wireless mac addr");
-
-
-/*---------------------------------------------------------------------*/
-/* Prototypes of Functions Used                                        */
-/*---------------------------------------------------------------------*/
-#ifdef DOT11_N_SUPPORT
-extern BOOLEAN ba_reordering_resource_init(PRTMP_ADAPTER pAd, int num);
-extern void ba_reordering_resource_release(PRTMP_ADAPTER pAd);
-#endif // DOT11_N_SUPPORT //
-extern NDIS_STATUS NICLoadRateSwitchingParams(IN PRTMP_ADAPTER pAd);
-
-
-// public function prototype
-INT __devinit rt28xx_probe(IN void *_dev_p, IN void *_dev_id_p,
-							IN UINT argc, OUT PRTMP_ADAPTER *ppAd);
-
-// private function prototype
-static int rt28xx_init(IN struct net_device *net_dev);
-INT rt28xx_send_packets(IN struct sk_buff *skb_p, IN struct net_device *net_dev);
-
-#if LINUX_VERSION_CODE <= 0x20402	// Red Hat 7.1
-struct net_device *alloc_netdev(
-	int sizeof_priv,
-	const char *mask,
-	void (*setup)(struct net_device *));
-#endif // LINUX_VERSION_CODE //
-
-static void CfgInitHook(PRTMP_ADAPTER pAd);
-//static BOOLEAN RT28XXAvailRANameAssign(IN CHAR *name_p);
-
-#ifdef CONFIG_STA_SUPPORT
-extern	const struct iw_handler_def rt28xx_iw_handler_def;
-#endif // CONFIG_STA_SUPPORT //
-
-#if WIRELESS_EXT >= 12
-// This function will be called when query /proc
-struct iw_statistics *rt28xx_get_wireless_stats(
-    IN struct net_device *net_dev);
-#endif
-
-struct net_device_stats *RT28xx_get_ether_stats(
-    IN  struct net_device *net_dev);
-
-/*
-========================================================================
-Routine Description:
-    Close raxx interface.
-
-Arguments:
-	*net_dev			the raxx interface pointer
-
-Return Value:
-    0					Open OK
-	otherwise			Open Fail
-
-Note:
-	1. if open fail, kernel will not call the close function.
-	2. Free memory for
-		(1) Mlme Memory Handler:		MlmeHalt()
-		(2) TX & RX:					RTMPFreeTxRxRingMemory()
-		(3) BA Reordering: 				ba_reordering_resource_release()
-========================================================================
-*/
-int MainVirtualIF_close(IN struct net_device *net_dev)
-{
-    RTMP_ADAPTER *pAd = net_dev->ml_priv;
-
-	// Sanity check for pAd
-	if (pAd == NULL)
-		return 0; // close ok
-
-	netif_carrier_off(pAd->net_dev);
-	netif_stop_queue(pAd->net_dev);
-
-
-
-	VIRTUAL_IF_DOWN(pAd);
-
-	RT_MOD_DEC_USE_COUNT();
-
-	return 0; // close ok
-}
-
-/*
-========================================================================
-Routine Description:
-    Open raxx interface.
-
-Arguments:
-	*net_dev			the raxx interface pointer
-
-Return Value:
-    0					Open OK
-	otherwise			Open Fail
-
-Note:
-	1. if open fail, kernel will not call the close function.
-	2. Free memory for
-		(1) Mlme Memory Handler:		MlmeHalt()
-		(2) TX & RX:					RTMPFreeTxRxRingMemory()
-		(3) BA Reordering: 				ba_reordering_resource_release()
-========================================================================
-*/
-int MainVirtualIF_open(IN struct net_device *net_dev)
-{
-    RTMP_ADAPTER *pAd = net_dev->ml_priv;
-
-	// Sanity check for pAd
-	if (pAd == NULL)
-		return 0; // close ok
-
-	if (VIRTUAL_IF_UP(pAd) != 0)
-		return -1;
-
-	// increase MODULE use count
-	RT_MOD_INC_USE_COUNT();
-
-	netif_start_queue(net_dev);
-	netif_carrier_on(net_dev);
-	netif_wake_queue(net_dev);
-
-	return 0;
-}
-
-/*
-========================================================================
-Routine Description:
-    Close raxx interface.
-
-Arguments:
-	*net_dev			the raxx interface pointer
-
-Return Value:
-    0					Open OK
-	otherwise			Open Fail
-
-Note:
-	1. if open fail, kernel will not call the close function.
-	2. Free memory for
-		(1) Mlme Memory Handler:		MlmeHalt()
-		(2) TX & RX:					RTMPFreeTxRxRingMemory()
-		(3) BA Reordering: 				ba_reordering_resource_release()
-========================================================================
-*/
-int rt28xx_close(IN PNET_DEV dev)
-{
-	struct net_device * net_dev = (struct net_device *)dev;
-    RTMP_ADAPTER	*pAd = net_dev->ml_priv;
-	BOOLEAN 		Cancelled = FALSE;
-	UINT32			i = 0;
-#ifdef RT2870
-	DECLARE_WAIT_QUEUE_HEAD(unlink_wakeup);
-	DECLARE_WAITQUEUE(wait, current);
-
-	//RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
-#endif // RT2870 //
-
-
-    DBGPRINT(RT_DEBUG_TRACE, ("===> rt28xx_close\n"));
-
-	// Sanity check for pAd
-	if (pAd == NULL)
-		return 0; // close ok
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-
-		// If dirver doesn't wake up firmware here,
-		// NICLoadFirmware will hang forever when interface is up again.
-		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
-        {
-		    AsicForceWakeup(pAd, TRUE);
-        }
-
-#ifdef QOS_DLS_SUPPORT
-		// send DLS-TEAR_DOWN message,
-		if (pAd->CommonCfg.bDLSCapable)
-		{
-			UCHAR i;
-
-			// tear down local dls table entry
-			for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-			{
-				if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
-				{
-					RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
-					pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-					pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-				}
-			}
-
-			// tear down peer dls table entry
-			for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
-			{
-				if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
-				{
-					RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
-					pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
-					pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-				}
-			}
-			RT28XX_MLME_HANDLER(pAd);
-		}
-#endif // QOS_DLS_SUPPORT //
-
-		if (INFRA_ON(pAd) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
-		{
-			MLME_DISASSOC_REQ_STRUCT	DisReq;
-			MLME_QUEUE_ELEM *MsgElem = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);
-
-			COPY_MAC_ADDR(DisReq.Addr, pAd->CommonCfg.Bssid);
-			DisReq.Reason =  REASON_DEAUTH_STA_LEAVING;
-
-			MsgElem->Machine = ASSOC_STATE_MACHINE;
-			MsgElem->MsgType = MT2_MLME_DISASSOC_REQ;
-			MsgElem->MsgLen = sizeof(MLME_DISASSOC_REQ_STRUCT);
-			NdisMoveMemory(MsgElem->Msg, &DisReq, sizeof(MLME_DISASSOC_REQ_STRUCT));
-
-			// Prevent to connect AP again in STAMlmePeriodicExec
-			pAd->MlmeAux.AutoReconnectSsidLen= 32;
-			NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
-
-			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
-			MlmeDisassocReqAction(pAd, MsgElem);
-			kfree(MsgElem);
-
-			RTMPusecDelay(1000);
-		}
-
-#ifdef RT2870
-	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
-#endif // RT2870 //
-
-#ifdef CCX_SUPPORT
-		RTMPCancelTimer(&pAd->StaCfg.LeapAuthTimer, &Cancelled);
-#endif
-
-		RTMPCancelTimer(&pAd->StaCfg.StaQuickResponeForRateUpTimer, &Cancelled);
-		RTMPCancelTimer(&pAd->StaCfg.WpaDisassocAndBlockAssocTimer, &Cancelled);
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-		{
-			union iwreq_data    wrqu;
-			// send wireless event to wpa_supplicant for infroming interface down.
-			memset(&wrqu, 0, sizeof(wrqu));
-			wrqu.data.flags = RT_INTERFACE_DOWN;
-			wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL);
-		}
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-		MlmeRadioOff(pAd);
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
-
-	for (i = 0 ; i < NUM_OF_TX_RING; i++)
-	{
-		while (pAd->DeQueueRunning[i] == TRUE)
-		{
-			printk("Waiting for TxQueue[%d] done..........\n", i);
-			RTMPusecDelay(1000);
-		}
-	}
-
-#ifdef RT2870
-	// ensure there are no more active urbs.
-	add_wait_queue (&unlink_wakeup, &wait);
-	pAd->wait = &unlink_wakeup;
-
-	// maybe wait for deletions to finish.
-	i = 0;
-	//while((i < 25) && atomic_read(&pAd->PendingRx) > 0)
-	while(i < 25)
-	{
-		unsigned long IrqFlags;
-
-		RTMP_IRQ_LOCK(&pAd->BulkInLock, IrqFlags);
-		if (pAd->PendingRx == 0)
-		{
-			RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
-			break;
-		}
-		RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
-
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,9)
-		msleep(UNLINK_TIMEOUT_MS);	//Time in millisecond
-#else
-		RTMPusecDelay(UNLINK_TIMEOUT_MS*1000);	//Time in microsecond
-#endif
-		i++;
-	}
-	pAd->wait = NULL;
-	remove_wait_queue (&unlink_wakeup, &wait);
-#endif // RT2870 //
-
-	//RTUSBCleanUpMLMEWaitQueue(pAd);	/*not used in RT28xx*/
-
-
-#ifdef RT2870
-	// We need clear timerQ related structure before exits of the timer thread.
-	RT2870_TimerQ_Exit(pAd);
-	// Close kernel threads or tasklets
-	RT28xxThreadTerminate(pAd);
-#endif // RT2870 //
-
-	// Stop Mlme state machine
-	MlmeHalt(pAd);
-
-	// Close kernel threads or tasklets
-	kill_thread_task(pAd);
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		MacTableReset(pAd);
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-
-	MeasureReqTabExit(pAd);
-	TpcReqTabExit(pAd);
-
-
-
-
-	// Free Ring or USB buffers
-	RTMPFreeTxRxRingMemory(pAd);
-
-	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
-
-#ifdef DOT11_N_SUPPORT
-	// Free BA reorder resource
-	ba_reordering_resource_release(pAd);
-#endif // DOT11_N_SUPPORT //
-
-#ifdef RT2870
-#ifdef INF_AMAZON_SE
-	if (pAd->UsbVendorReqBuf)
-		os_free_mem(pAd, pAd->UsbVendorReqBuf);
-#endif // INF_AMAZON_SE //
-#endif // RT2870 //
-
-	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_START_UP);
-
-	return 0; // close ok
-} /* End of rt28xx_close */
-
-static int rt28xx_init(IN struct net_device *net_dev)
-{
-	PRTMP_ADAPTER 			pAd = net_dev->ml_priv;
-	UINT					index;
-	UCHAR					TmpPhy;
-	NDIS_STATUS				Status;
-	UINT32 		MacCsr0 = 0;
-
-#ifdef RT2870
-#ifdef INF_AMAZON_SE
-	init_MUTEX(&(pAd->UsbVendorReq_semaphore));
-	os_alloc_mem(pAd, (PUCHAR)&pAd->UsbVendorReqBuf, MAX_PARAM_BUFFER_SIZE - 1);
-	if (pAd->UsbVendorReqBuf == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("Allocate vendor request temp buffer failed!\n"));
-		goto err0;
-	}
-#endif // INF_AMAZON_SE //
-#endif // RT2870 //
-
-#ifdef DOT11_N_SUPPORT
-	// Allocate BA Reordering memory
-	ba_reordering_resource_init(pAd, MAX_REORDERING_MPDU_NUM);
-#endif // DOT11_N_SUPPORT //
-
-	// Make sure MAC gets ready.
-	index = 0;
-	do
-	{
-		RTMP_IO_READ32(pAd, MAC_CSR0, &MacCsr0);
-		pAd->MACVersion = MacCsr0;
-
-		if ((pAd->MACVersion != 0x00) && (pAd->MACVersion != 0xFFFFFFFF))
-			break;
-
-		RTMPusecDelay(10);
-	} while (index++ < 100);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("MAC_CSR0  [ Ver:Rev=0x%08x]\n", pAd->MACVersion));
-
-	// Disable DMA
-	RT28XXDMADisable(pAd);
-
-
-	// Load 8051 firmware
-	Status = NICLoadFirmware(pAd);
-	if (Status != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT_ERR(("NICLoadFirmware failed, Status[=0x%08x]\n", Status));
-		goto err1;
-	}
-
-	NICLoadRateSwitchingParams(pAd);
-
-	// Disable interrupts here which is as soon as possible
-	// This statement should never be true. We might consider to remove it later
-
-	Status = RTMPAllocTxRxRingMemory(pAd);
-	if (Status != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT_ERR(("RTMPAllocDMAMemory failed, Status[=0x%08x]\n", Status));
-		goto err1;
-	}
-
-	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
-
-	// initialize MLME
-	//
-
-	Status = MlmeInit(pAd);
-	if (Status != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT_ERR(("MlmeInit failed, Status[=0x%08x]\n", Status));
-		goto err2;
-	}
-
-	// Initialize pAd->StaCfg, pAd->ApCfg, pAd->CommonCfg to manufacture default
-	//
-	UserCfgInit(pAd);
-
-#ifdef RT2870
-	// We need init timerQ related structure before create the timer thread.
-	RT2870_TimerQ_Init(pAd);
-#endif // RT2870 //
-
-	RT28XX_TASK_THREAD_INIT(pAd, Status);
-	if (Status != NDIS_STATUS_SUCCESS)
-		goto err1;
-
-//	COPY_MAC_ADDR(pAd->ApCfg.MBSSID[apidx].Bssid, netif->hwaddr);
-//	pAd->bForcePrintTX = TRUE;
-
-	CfgInitHook(pAd);
-
-
-#ifdef BLOCK_NET_IF
-	initblockQueueTab(pAd);
-#endif // BLOCK_NET_IF //
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		NdisAllocateSpinLock(&pAd->MacTabLock);
-#endif // CONFIG_STA_SUPPORT //
-
-	MeasureReqTabInit(pAd);
-	TpcReqTabInit(pAd);
-
-	//
-	// Init the hardware, we need to init asic before read registry, otherwise mac register will be reset
-	//
-	Status = NICInitializeAdapter(pAd, TRUE);
-	if (Status != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT_ERR(("NICInitializeAdapter failed, Status[=0x%08x]\n", Status));
-		if (Status != NDIS_STATUS_SUCCESS)
-		goto err3;
-	}
-
-	// Read parameters from Config File
-	Status = RTMPReadParametersHook(pAd);
-
-	printk("1. Phy Mode = %d\n", pAd->CommonCfg.PhyMode);
-	if (Status != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT_ERR(("NICReadRegParameters failed, Status[=0x%08x]\n",Status));
-		goto err4;
-	}
-
-#ifdef RT2870
-	pAd->CommonCfg.bMultipleIRP = FALSE;
-
-	if (pAd->CommonCfg.bMultipleIRP)
-		pAd->CommonCfg.NumOfBulkInIRP = RX_RING_SIZE;
-	else
-		pAd->CommonCfg.NumOfBulkInIRP = 1;
-#endif // RT2870 //
-
-
-   	//Init Ba Capability parameters.
-//	RT28XX_BA_INIT(pAd);
-#ifdef DOT11_N_SUPPORT
-	pAd->CommonCfg.DesiredHtPhy.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
-	pAd->CommonCfg.DesiredHtPhy.AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable;
-	pAd->CommonCfg.DesiredHtPhy.AmsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
-	pAd->CommonCfg.DesiredHtPhy.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
-	// UPdata to HT IE
-	pAd->CommonCfg.HtCapability.HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
-	pAd->CommonCfg.HtCapability.HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
-	pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
-#endif // DOT11_N_SUPPORT //
-
-	// after reading Registry, we now know if in AP mode or STA mode
-
-	// Load 8051 firmware; crash when FW image not existent
-	// Status = NICLoadFirmware(pAd);
-	// if (Status != NDIS_STATUS_SUCCESS)
-	//    break;
-
-	printk("2. Phy Mode = %d\n", pAd->CommonCfg.PhyMode);
-
-	// We should read EEPROM for all cases.  rt2860b
-	NICReadEEPROMParameters(pAd, mac);
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-
-	printk("3. Phy Mode = %d\n", pAd->CommonCfg.PhyMode);
-
-	NICInitAsicFromEEPROM(pAd); //rt2860b
-
-	// Set PHY to appropriate mode
-	TmpPhy = pAd->CommonCfg.PhyMode;
-	pAd->CommonCfg.PhyMode = 0xff;
-	RTMPSetPhyMode(pAd, TmpPhy);
-#ifdef DOT11_N_SUPPORT
-	SetCommonHT(pAd);
-#endif // DOT11_N_SUPPORT //
-
-	// No valid channels.
-	if (pAd->ChannelListNum == 0)
-	{
-		printk("Wrong configuration. No valid channel found. Check \"ContryCode\" and \"ChannelGeography\" setting.\n");
-		goto err4;
-	}
-
-#ifdef DOT11_N_SUPPORT
-	printk("MCS Set = %02x %02x %02x %02x %02x\n", pAd->CommonCfg.HtCapability.MCSSet[0],
-           pAd->CommonCfg.HtCapability.MCSSet[1], pAd->CommonCfg.HtCapability.MCSSet[2],
-           pAd->CommonCfg.HtCapability.MCSSet[3], pAd->CommonCfg.HtCapability.MCSSet[4]);
-#endif // DOT11_N_SUPPORT //
-
-#ifdef RT2870
-    //Init RT30xx RFRegisters after read RFIC type from EEPROM
-	NICInitRT30xxRFRegisters(pAd);
-#endif // RT2870 //
-
-#if 0
-	// Patch cardbus controller if EEPROM said so.
-	if (pAd->bTest1 == FALSE)
-		RTMPPatchCardBus(pAd);
-#endif
-
-
-//		APInitialize(pAd);
-
-#ifdef IKANOS_VX_1X0
-	VR_IKANOS_FP_Init(pAd->ApCfg.BssidNum, pAd->PermanentAddress);
-#endif // IKANOS_VX_1X0 //
-
-		//
-	// Initialize RF register to default value
-	//
-	AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
-	AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-
-	// 8051 firmware require the signal during booting time.
-	AsicSendCommandToMcu(pAd, 0x72, 0xFF, 0x00, 0x00);
-
-	if (pAd && (Status != NDIS_STATUS_SUCCESS))
-	{
-		//
-		// Undo everything if it failed
-		//
-		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-		{
-//			NdisMDeregisterInterrupt(&pAd->Interrupt);
-			RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
-		}
-//		RTMPFreeAdapter(pAd); // we will free it in disconnect()
-	}
-	else if (pAd)
-	{
-		// Microsoft HCT require driver send a disconnect event after driver initialization.
-		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
-//		pAd->IndicateMediaState = NdisMediaStateDisconnected;
-		RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE);
-
-		DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event B!\n"));
-
-
-#ifdef RT2870
-		RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS);
-		RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
-
-		//
-		// Support multiple BulkIn IRP,
-		// the value on pAd->CommonCfg.NumOfBulkInIRP may be large than 1.
-		//
-		for(index=0; index<pAd->CommonCfg.NumOfBulkInIRP; index++)
-		{
-			RTUSBBulkReceive(pAd);
-			DBGPRINT(RT_DEBUG_TRACE, ("RTUSBBulkReceive!\n" ));
-		}
-#endif // RT2870 //
-	}// end of else
-
-
-	DBGPRINT_S(Status, ("<==== RTMPInitialize, Status=%x\n", Status));
-
-	return TRUE;
-
-
-err4:
-err3:
-	MlmeHalt(pAd);
-err2:
-	RTMPFreeTxRxRingMemory(pAd);
-//	RTMPFreeAdapter(pAd);
-err1:
-
-#ifdef DOT11_N_SUPPORT
-	os_free_mem(pAd, pAd->mpdu_blk_pool.mem); // free BA pool
-#endif // DOT11_N_SUPPORT //
-	RT28XX_IRQ_RELEASE(net_dev);
-
-	// shall not set ml_priv to NULL here because the ml_priv didn't been free yet.
-	//net_dev->ml_priv = 0;
-#ifdef INF_AMAZON_SE
-err0:
-#endif // INF_AMAZON_SE //
-	printk("!!! %s Initialized fail !!!\n", RT28xx_CHIP_NAME);
-	return FALSE;
-} /* End of rt28xx_init */
-
-
-/*
-========================================================================
-Routine Description:
-    Open raxx interface.
-
-Arguments:
-	*net_dev			the raxx interface pointer
-
-Return Value:
-    0					Open OK
-	otherwise			Open Fail
-
-Note:
-========================================================================
-*/
-int rt28xx_open(IN PNET_DEV dev)
-{
-	struct net_device * net_dev = (struct net_device *)dev;
-	PRTMP_ADAPTER pAd = net_dev->ml_priv;
-	int retval = 0;
- 	POS_COOKIE pObj;
-
-
-	// Sanity check for pAd
-	if (pAd == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->ml_priv will be NULL in 2rd open */
-		return -1;
-	}
-
-#ifdef CONFIG_APSTA_MIXED_SUPPORT
-	if (pAd->OpMode == OPMODE_AP)
-	{
-		CW_MAX_IN_BITS = 6;
-	}
-	else if (pAd->OpMode == OPMODE_STA)
-	{
-		CW_MAX_IN_BITS = 10;
-	}
-
-#if WIRELESS_EXT >= 12
-	if (net_dev->priv_flags == INT_MAIN)
-	{
-		if (pAd->OpMode == OPMODE_AP)
-			net_dev->wireless_handlers = (struct iw_handler_def *) &rt28xx_ap_iw_handler_def;
-		else if (pAd->OpMode == OPMODE_STA)
-			net_dev->wireless_handlers = (struct iw_handler_def *) &rt28xx_iw_handler_def;
-	}
-#endif // WIRELESS_EXT >= 12 //
-#endif // CONFIG_APSTA_MIXED_SUPPORT //
-
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-
-	// Init
- 	pObj = (POS_COOKIE)pAd->OS_Cookie;
-
-	// reset Adapter flags
-	RTMP_CLEAR_FLAGS(pAd);
-
-	// Request interrupt service routine for PCI device
-	// register the interrupt routine with the os
-	RT28XX_IRQ_REQUEST(net_dev);
-
-
-	// Init BssTab & ChannelInfo tabbles for auto channel select.
-
-
-	// Chip & other init
-	if (rt28xx_init(net_dev) == FALSE)
-		goto err;
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		NdisZeroMemory(pAd->StaCfg.dev_name, 16);
-		NdisMoveMemory(pAd->StaCfg.dev_name, net_dev->name, strlen(net_dev->name));
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	// Set up the Mac address
-	NdisMoveMemory(net_dev->dev_addr, (void *) pAd->CurrentAddress, 6);
-
-	// Init IRQ parameters
-	RT28XX_IRQ_INIT(pAd);
-
-	// Various AP function init
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-		{
-			union iwreq_data    wrqu;
-			// send wireless event to wpa_supplicant for infroming interface down.
-			memset(&wrqu, 0, sizeof(wrqu));
-			wrqu.data.flags = RT_INTERFACE_UP;
-			wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL);
-		}
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	// Enable Interrupt
-	RT28XX_IRQ_ENABLE(pAd);
-
-	// Now Enable RxTx
-	RTMPEnableRxTx(pAd);
-	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_START_UP);
-
-	{
-	UINT32 reg = 0;
-	RTMP_IO_READ32(pAd, 0x1300, &reg);  // clear garbage interrupts
-	printk("0x1300 = %08x\n", reg);
-	}
-
-	{
-//	u32 reg;
-//	u8  byte;
-//	u16 tmp;
-
-//	RTMP_IO_READ32(pAd, XIFS_TIME_CFG, &reg);
-
-//	tmp = 0x0805;
-//	reg  = (reg & 0xffff0000) | tmp;
-//	RTMP_IO_WRITE32(pAd, XIFS_TIME_CFG, reg);
-
-	}
-
-#if 0
-	/*
-	 * debugging helper
-	 * 		show the size of main table in Adapter structure
-	 *		MacTab  -- 185K
-	 *		BATable -- 137K
-	 * 		Total 	-- 385K  !!!!! (5/26/2006)
-	 */
-	printk("sizeof(pAd->MacTab) = %ld\n", sizeof(pAd->MacTab));
-	printk("sizeof(pAd->AccessControlList) = %ld\n", sizeof(pAd->AccessControlList));
-	printk("sizeof(pAd->ApCfg) = %ld\n", sizeof(pAd->ApCfg));
-	printk("sizeof(pAd->BATable) = %ld\n", sizeof(pAd->BATable));
-	BUG();
-#endif
-
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-
-	return (retval);
-
-err:
-	return (-1);
-} /* End of rt28xx_open */
-
-static const struct net_device_ops rt2870_netdev_ops = {
-	.ndo_open		= MainVirtualIF_open,
-	.ndo_stop		= MainVirtualIF_close,
-	.ndo_do_ioctl		= rt28xx_ioctl,
-	.ndo_get_stats		= RT28xx_get_ether_stats,
-	.ndo_validate_addr	= NULL,
-	.ndo_set_mac_address	= eth_mac_addr,
-	.ndo_change_mtu		= eth_change_mtu,
-#ifdef IKANOS_VX_1X0
-	.ndo_start_xmit		= IKANOS_DataFramesTx,
-#else
-	.ndo_start_xmit		= rt28xx_send_packets,
-#endif
-};
-
-/* Must not be called for mdev and apdev */
-static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER pAd)
-{
-	NDIS_STATUS Status;
-	INT     i=0;
-	CHAR    slot_name[IFNAMSIZ];
-	struct net_device   *device;
-
-
-	//ether_setup(dev);
-//	dev->set_multicast_list = ieee80211_set_multicast_list;
-//	dev->change_mtu = ieee80211_change_mtu;
-#ifdef CONFIG_STA_SUPPORT
-#if WIRELESS_EXT >= 12
-	if (pAd->OpMode == OPMODE_STA)
-	{
-		dev->wireless_handlers = &rt28xx_iw_handler_def;
-	}
-#endif //WIRELESS_EXT >= 12
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef CONFIG_APSTA_MIXED_SUPPORT
-#if WIRELESS_EXT >= 12
-	if (pAd->OpMode == OPMODE_AP)
-	{
-		dev->wireless_handlers = &rt28xx_ap_iw_handler_def;
-	}
-#endif //WIRELESS_EXT >= 12
-#endif // CONFIG_APSTA_MIXED_SUPPORT //
-
-#if WIRELESS_EXT < 21
-		dev->get_wireless_stats = rt28xx_get_wireless_stats;
-#endif
-//	dev->uninit = ieee80211_if_reinit;
-//	dev->destructor = ieee80211_if_free;
-	dev->priv_flags = INT_MAIN;
-	dev->netdev_ops = &rt2870_netdev_ops;
-	// find available device name
-	for (i = 0; i < 8; i++)
-	{
-#ifdef MULTIPLE_CARD_SUPPORT
-		if (pAd->MC_RowID >= 0)
-			sprintf(slot_name, "ra%02d_%d", pAd->MC_RowID, i);
-		else
-#endif // MULTIPLE_CARD_SUPPORT //
-		sprintf(slot_name, "ra%d", i);
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26)
-        device = dev_get_by_name(dev_net(dev), slot_name);
-#else
-        device = dev_get_by_name(dev->nd_net, slot_name);
-#endif
-#else
-		device = dev_get_by_name(slot_name);
-#endif
-		if (device != NULL) dev_put(device);
-#else
-		for (device = dev_base; device != NULL; device = device->next)
-		{
-			if (strncmp(device->name, slot_name, 4) == 0)
-				break;
-		}
-#endif
-		if(device == NULL)
-			break;
-	}
-
-	if(i == 8)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("No available slot name\n"));
-		Status = NDIS_STATUS_FAILURE;
-	}
-	else
-	{
-#ifdef MULTIPLE_CARD_SUPPORT
-		if (pAd->MC_RowID >= 0)
-	        sprintf(dev->name, "ra%02d_%d", pAd->MC_RowID, i);
-		else
-#endif // MULTIPLE_CARD_SUPPORT //
-		sprintf(dev->name, "ra%d", i);
-		Status = NDIS_STATUS_SUCCESS;
-	}
-
-	return Status;
-
-}
-
-
-#ifdef MULTIPLE_CARD_SUPPORT
-/*
-========================================================================
-Routine Description:
-    Get card profile path.
-
-Arguments:
-    pAd
-
-Return Value:
-    TRUE		- Find a card profile
-	FALSE		- use default profile
-
-Note:
-========================================================================
-*/
-extern INT RTMPGetKeyParameter(
-    IN  PCHAR   key,
-    OUT PCHAR   dest,
-    IN  INT     destsize,
-    IN  PCHAR   buffer);
-
-BOOLEAN RTMP_CardInfoRead(
-	IN	PRTMP_ADAPTER pAd)
-{
-#define MC_SELECT_CARDID		0	/* use CARD ID (0 ~ 31) to identify different cards */
-#define MC_SELECT_MAC			1	/* use CARD MAC to identify different cards */
-#define MC_SELECT_CARDTYPE		2	/* use CARD type (abgn or bgn) to identify different cards */
-
-#define LETTER_CASE_TRANSLATE(txt_p, card_id)			\
-	{	UINT32 _len; char _char;						\
-		for(_len=0; _len<strlen(card_id); _len++) {		\
-			_char = *(txt_p + _len);					\
-			if (('A' <= _char) && (_char <= 'Z'))		\
-				*(txt_p+_len) = 'a'+(_char-'A');		\
-		} }
-
-	struct file *srcf;
-	INT retval, orgfsuid, orgfsgid;
-   	mm_segment_t orgfs;
-	CHAR *buffer, *tmpbuf, card_id_buf[30], RFIC_word[30];
-	BOOLEAN flg_match_ok = FALSE;
-	INT32 card_select_method;
-	INT32 card_free_id, card_nouse_id, card_same_mac_id, card_match_id;
-	EEPROM_ANTENNA_STRUC antenna;
-	USHORT addr01, addr23, addr45;
-	UINT8 mac[6];
-	UINT32 data, card_index;
-	UCHAR *start_ptr;
-
-
-	// init
-	buffer = kmalloc(MAX_INI_BUFFER_SIZE, MEM_ALLOC_FLAG);
-	if (buffer == NULL)
-        return FALSE;
-
-	tmpbuf = kmalloc(MAX_PARAM_BUFFER_SIZE, MEM_ALLOC_FLAG);
-	if(tmpbuf == NULL)
-	{
-		kfree(buffer);
-        return NDIS_STATUS_FAILURE;
-	}
-
-	orgfsuid = current->fsuid;
-	orgfsgid = current->fsgid;
-	current->fsuid = current->fsgid = 0;
-    orgfs = get_fs();
-    set_fs(KERNEL_DS);
-
-	// get RF IC type
-	RTMP_IO_READ32(pAd, E2PROM_CSR, &data);
-
-	if ((data & 0x30) == 0)
-		pAd->EEPROMAddressNum = 6;	// 93C46
-	else if ((data & 0x30) == 0x10)
-		pAd->EEPROMAddressNum = 8;	// 93C66
-	else
-		pAd->EEPROMAddressNum = 8;	// 93C86
-
-	//antenna.word = RTMP_EEPROM_READ16(pAd, EEPROM_NIC1_OFFSET);
-	RT28xx_EEPROM_READ16(pAd, EEPROM_NIC1_OFFSET, antenna.word);
-
-	if ((antenna.field.RfIcType == RFIC_2850) ||
-		(antenna.field.RfIcType == RFIC_2750))
-	{
-		/* ABGN card */
-		strcpy(RFIC_word, "abgn");
-	}
-	else
-	{
-		/* BGN card */
-		strcpy(RFIC_word, "bgn");
-	}
-
-	// get MAC address
-	//addr01 = RTMP_EEPROM_READ16(pAd, 0x04);
-	//addr23 = RTMP_EEPROM_READ16(pAd, 0x06);
-	//addr45 = RTMP_EEPROM_READ16(pAd, 0x08);
-	RT28xx_EEPROM_READ16(pAd, 0x04, addr01);
-	RT28xx_EEPROM_READ16(pAd, 0x06, addr23);
-	RT28xx_EEPROM_READ16(pAd, 0x08, addr45);
-
-	mac[0] = (UCHAR)(addr01 & 0xff);
-	mac[1] = (UCHAR)(addr01 >> 8);
-	mac[2] = (UCHAR)(addr23 & 0xff);
-	mac[3] = (UCHAR)(addr23 >> 8);
-	mac[4] = (UCHAR)(addr45 & 0xff);
-	mac[5] = (UCHAR)(addr45 >> 8);
-
-	// open card information file
-	srcf = filp_open(CARD_INFO_PATH, O_RDONLY, 0);
-	if (IS_ERR(srcf))
-	{
-		/* card information file does not exist */
-			DBGPRINT(RT_DEBUG_TRACE,
-				("--> Error %ld opening %s\n", -PTR_ERR(srcf), CARD_INFO_PATH));
-		return FALSE;
-	}
-
-	if (srcf->f_op && srcf->f_op->read)
-	{
-		/* card information file exists so reading the card information */
-		memset(buffer, 0x00, MAX_INI_BUFFER_SIZE);
-		retval = srcf->f_op->read(srcf, buffer, MAX_INI_BUFFER_SIZE, &srcf->f_pos);
-		if (retval < 0)
-		{
-			/* read fail */
-				DBGPRINT(RT_DEBUG_TRACE,
-					("--> Read %s error %d\n", CARD_INFO_PATH, -retval));
-		}
-		else
-		{
-			/* get card selection method */
-			memset(tmpbuf, 0x00, MAX_PARAM_BUFFER_SIZE);
-			card_select_method = MC_SELECT_CARDTYPE; // default
-
-			if (RTMPGetKeyParameter("SELECT", tmpbuf, 256, buffer))
-			{
-				if (strcmp(tmpbuf, "CARDID") == 0)
-					card_select_method = MC_SELECT_CARDID;
-				else if (strcmp(tmpbuf, "MAC") == 0)
-					card_select_method = MC_SELECT_MAC;
-				else if (strcmp(tmpbuf, "CARDTYPE") == 0)
-					card_select_method = MC_SELECT_CARDTYPE;
-			}
-
-			DBGPRINT(RT_DEBUG_TRACE,
-					("MC> Card Selection = %d\n", card_select_method));
-
-			// init
-			card_free_id = -1;
-			card_nouse_id = -1;
-			card_same_mac_id = -1;
-			card_match_id = -1;
-
-			// search current card information records
-			for(card_index=0;
-				card_index<MAX_NUM_OF_MULTIPLE_CARD;
-				card_index++)
-			{
-				if ((*(UINT32 *)&MC_CardMac[card_index][0] == 0) &&
-					(*(UINT16 *)&MC_CardMac[card_index][4] == 0))
-				{
-					// MAC is all-0 so the entry is available
-					MC_CardUsed[card_index] = 0;
-
-					if (card_free_id < 0)
-						card_free_id = card_index; // 1st free entry
-				}
-				else
-				{
-					if (memcmp(MC_CardMac[card_index], mac, 6) == 0)
-					{
-						// we find the entry with same MAC
-						if (card_same_mac_id < 0)
-							card_same_mac_id = card_index; // 1st same entry
-					}
-					else
-					{
-						// MAC is not all-0 but used flag == 0
-						if ((MC_CardUsed[card_index] == 0) &&
-							(card_nouse_id < 0))
-						{
-							card_nouse_id = card_index; // 1st available entry
-						}
-					}
-				}
-			}
-
-			DBGPRINT(RT_DEBUG_TRACE,
-					("MC> Free = %d, Same = %d, NOUSE = %d\n",
-					card_free_id, card_same_mac_id, card_nouse_id));
-
-			if ((card_same_mac_id >= 0) &&
-				((card_select_method == MC_SELECT_CARDID) ||
-				(card_select_method == MC_SELECT_CARDTYPE)))
-			{
-				// same MAC entry is found
-				card_match_id = card_same_mac_id;
-
-				if (card_select_method == MC_SELECT_CARDTYPE)
-				{
-					// for CARDTYPE
-					sprintf(card_id_buf, "%02dCARDTYPE%s",
-							card_match_id, RFIC_word);
-
-					if ((start_ptr=rtstrstruncasecmp(buffer, card_id_buf)) != NULL)
-					{
-						// we found the card ID
-						LETTER_CASE_TRANSLATE(start_ptr, card_id_buf);
-					}
-				}
-			}
-			else
-			{
-				// the card is 1st plug-in, try to find the match card profile
-				switch(card_select_method)
-				{
-					case MC_SELECT_CARDID: // CARDID
-					default:
-						if (card_free_id >= 0)
-							card_match_id = card_free_id;
-						else
-							card_match_id = card_nouse_id;
-						break;
-
-					case MC_SELECT_MAC: // MAC
-						sprintf(card_id_buf, "MAC%02x:%02x:%02x:%02x:%02x:%02x",
-								mac[0], mac[1], mac[2],
-								mac[3], mac[4], mac[5]);
-
-						/* try to find the key word in the card file */
-						if ((start_ptr=rtstrstruncasecmp(buffer, card_id_buf)) != NULL)
-						{
-							LETTER_CASE_TRANSLATE(start_ptr, card_id_buf);
-
-							/* get the row ID (2 ASCII characters) */
-							start_ptr -= 2;
-							card_id_buf[0] = *(start_ptr);
-							card_id_buf[1] = *(start_ptr+1);
-							card_id_buf[2] = 0x00;
-
-							card_match_id = simple_strtol(card_id_buf, 0, 10);
-						}
-						break;
-
-					case MC_SELECT_CARDTYPE: // CARDTYPE
-						card_nouse_id = -1;
-
-						for(card_index=0;
-							card_index<MAX_NUM_OF_MULTIPLE_CARD;
-							card_index++)
-						{
-							sprintf(card_id_buf, "%02dCARDTYPE%s",
-									card_index, RFIC_word);
-
-							if ((start_ptr=rtstrstruncasecmp(buffer,
-														card_id_buf)) != NULL)
-							{
-								LETTER_CASE_TRANSLATE(start_ptr, card_id_buf);
-
-								if (MC_CardUsed[card_index] == 0)
-								{
-									/* current the card profile is not used */
-									if ((*(UINT32 *)&MC_CardMac[card_index][0] == 0) &&
-										(*(UINT16 *)&MC_CardMac[card_index][4] == 0))
-									{
-										// find it and no previous card use it
-										card_match_id = card_index;
-										break;
-									}
-									else
-									{
-										// ever a card use it
-										if (card_nouse_id < 0)
-											card_nouse_id = card_index;
-									}
-								}
-							}
-						}
-
-						// if not find a free one, use the available one
-						if (card_match_id < 0)
-							card_match_id = card_nouse_id;
-						break;
-				}
-			}
-
-			if (card_match_id >= 0)
-			{
-				// make up search keyword
-				switch(card_select_method)
-				{
-					case MC_SELECT_CARDID: // CARDID
-						sprintf(card_id_buf, "%02dCARDID", card_match_id);
-						break;
-
-					case MC_SELECT_MAC: // MAC
-						sprintf(card_id_buf,
-								"%02dmac%02x:%02x:%02x:%02x:%02x:%02x",
-								card_match_id,
-								mac[0], mac[1], mac[2],
-								mac[3], mac[4], mac[5]);
-						break;
-
-					case MC_SELECT_CARDTYPE: // CARDTYPE
-					default:
-						sprintf(card_id_buf, "%02dcardtype%s",
-								card_match_id, RFIC_word);
-						break;
-				}
-
-				DBGPRINT(RT_DEBUG_TRACE, ("Search Keyword = %s\n", card_id_buf));
-
-				// read card file path
-				if (RTMPGetKeyParameter(card_id_buf, tmpbuf, 256, buffer))
-				{
-					if (strlen(tmpbuf) < sizeof(pAd->MC_FileName))
-					{
-						// backup card information
-						pAd->MC_RowID = card_match_id; /* base 0 */
-						MC_CardUsed[card_match_id] = 1;
-						memcpy(MC_CardMac[card_match_id], mac, sizeof(mac));
-
-						// backup card file path
-						NdisMoveMemory(pAd->MC_FileName, tmpbuf , strlen(tmpbuf));
-						pAd->MC_FileName[strlen(tmpbuf)] = '\0';
-						flg_match_ok = TRUE;
-
-						DBGPRINT(RT_DEBUG_TRACE,
-								("Card Profile Name = %s\n", pAd->MC_FileName));
-					}
-					else
-					{
-						DBGPRINT(RT_DEBUG_ERROR,
-								("Card Profile Name length too large!\n"));
-					}
-				}
-				else
-				{
-					DBGPRINT(RT_DEBUG_ERROR,
-							("Can not find search key word in card.dat!\n"));
-				}
-
-				if ((flg_match_ok != TRUE) &&
-					(card_match_id < MAX_NUM_OF_MULTIPLE_CARD))
-				{
-					MC_CardUsed[card_match_id] = 0;
-					memset(MC_CardMac[card_match_id], 0, sizeof(mac));
-				}
-			} // if (card_match_id >= 0)
-		}
-	}
-
-	// close file
-	retval = filp_close(srcf, NULL);
-	set_fs(orgfs);
-	current->fsuid = orgfsuid;
-	current->fsgid = orgfsgid;
-	kfree(buffer);
-	kfree(tmpbuf);
-	return flg_match_ok;
-}
-#endif // MULTIPLE_CARD_SUPPORT //
-
-
-/*
-========================================================================
-Routine Description:
-    Probe RT28XX chipset.
-
-Arguments:
-    _dev_p				Point to the PCI or USB device
-	_dev_id_p			Point to the PCI or USB device ID
-
-Return Value:
-    0					Probe OK
-	-ENODEV				Probe Fail
-
-Note:
-========================================================================
-*/
-INT __devinit   rt28xx_probe(
-    IN  void *_dev_p,
-    IN  void *_dev_id_p,
-	IN  UINT argc,
-	OUT PRTMP_ADAPTER *ppAd)
-{
-    struct  net_device	*net_dev;
-    PRTMP_ADAPTER       pAd = (PRTMP_ADAPTER) NULL;
-    INT                 status;
-	PVOID				handle;
-#ifdef RT2870
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)	/* kernel 2.4 series */
-	struct usb_device *dev_p = (struct usb_device *)_dev_p;
-#else
-	struct usb_interface *intf = (struct usb_interface *)_dev_p;
-	struct usb_device *dev_p = interface_to_usbdev(intf);
-
-	dev_p = usb_get_dev(dev_p);
-#endif // LINUX_VERSION_CODE //
-#endif // RT2870 //
-
-
-#ifdef CONFIG_STA_SUPPORT
-    DBGPRINT(RT_DEBUG_TRACE, ("STA Driver version-%s\n", STA_DRIVER_VERSION));
-#endif // CONFIG_STA_SUPPORT //
-
-	// Check chipset vendor/product ID
-//	if (RT28XXChipsetCheck(_dev_p) == FALSE)
-//		goto err_out;
-
-#if LINUX_VERSION_CODE <= 0x20402       // Red Hat 7.1
-    net_dev = alloc_netdev(sizeof(PRTMP_ADAPTER), "eth%d", ether_setup);
-#else
-    net_dev = alloc_etherdev(sizeof(PRTMP_ADAPTER));
-#endif
-    if (net_dev == NULL)
-    {
-        printk("alloc_netdev failed\n");
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,15)
-		module_put(THIS_MODULE);
-#endif //LINUX_VERSION_CODE < KERNEL_VERSION(2,6,15)
-#else
-		MOD_DEC_USE_COUNT;
-#endif
-        goto err_out;
-    }
-
-// sample
-//	if (rt_ieee80211_if_setup(net_dev) != NDIS_STATUS_SUCCESS)
-//		goto err_out;
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)
-    SET_MODULE_OWNER(net_dev);
-#endif
-
-	netif_stop_queue(net_dev);
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-/* for supporting Network Manager */
-/* Set the sysfs physical device reference for the network logical device
- * if set prior to registration will cause a symlink during initialization.
- */
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
-    SET_NETDEV_DEV(net_dev, &(dev_p->dev));
-#endif
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-
-	// Allocate RTMP_ADAPTER miniport adapter structure
-	handle = kmalloc(sizeof(struct os_cookie), GFP_KERNEL);
-	RT28XX_HANDLE_DEV_ASSIGN(handle, dev_p);
-
-	status = RTMPAllocAdapterBlock(handle, &pAd);
-	if (status != NDIS_STATUS_SUCCESS)
-		goto err_out_free_netdev;
-
-	net_dev->ml_priv = (PVOID)pAd;
-    pAd->net_dev = net_dev; // must be before RT28XXNetDevInit()
-
-	RT28XXNetDevInit(_dev_p, net_dev, pAd);
-
-#ifdef CONFIG_STA_SUPPORT
-    pAd->StaCfg.OriDevType = net_dev->type;
-#endif // CONFIG_STA_SUPPORT //
-
-	// Find and assign a free interface name, raxx
-//	RT28XXAvailRANameAssign(net_dev->name);
-
-	// Post config
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-	if (RT28XXProbePostConfig(_dev_p, pAd, argc) == FALSE)
-		goto err_out_unmap;
-#else
-	if (RT28XXProbePostConfig(_dev_p, pAd, 0) == FALSE)
-		goto err_out_unmap;
-#endif // LINUX_VERSION_CODE //
-
-#ifdef CONFIG_STA_SUPPORT
-	pAd->OpMode = OPMODE_STA;
-#endif // CONFIG_STA_SUPPORT //
-
-
-#ifdef MULTIPLE_CARD_SUPPORT
-	// find its profile path
-	pAd->MC_RowID = -1; // use default profile path
-	RTMP_CardInfoRead(pAd);
-
-	if (pAd->MC_RowID == -1)
-#ifdef CONFIG_STA_SUPPORT
-		strcpy(pAd->MC_FileName, STA_PROFILE_PATH);
-#endif // CONFIG_STA_SUPPORT //
-
-	DBGPRINT(RT_DEBUG_TRACE,
-			("MC> ROW = %d, PATH = %s\n", pAd->MC_RowID, pAd->MC_FileName));
-#endif // MULTIPLE_CARD_SUPPORT //
-
-	// sample move
-	if (rt_ieee80211_if_setup(net_dev, pAd) != NDIS_STATUS_SUCCESS)
-		goto err_out_unmap;
-
-    // Register this device
-    status = register_netdev(net_dev);
-    if (status)
-        goto err_out_unmap;
-
-    // Set driver data
-	RT28XX_DRVDATA_SET(_dev_p);
-
-
-
-	*ppAd = pAd;
-    return 0; // probe ok
-
-
-	/* --------------------------- ERROR HANDLE --------------------------- */
-err_out_unmap:
-	RTMPFreeAdapter(pAd);
-	RT28XX_UNMAP();
-
-err_out_free_netdev:
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-    free_netdev(net_dev);
-#else
-	kfree(net_dev);
-#endif
-
-err_out:
-	RT28XX_PUT_DEVICE(dev_p);
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-	return (LONG)NULL;
-#else
-    return -ENODEV; /* probe fail */
-#endif // LINUX_VERSION_CODE //
-} /* End of rt28xx_probe */
-
-
-/*
-========================================================================
-Routine Description:
-    The entry point for Linux kernel sent packet to our driver.
-
-Arguments:
-    sk_buff *skb		the pointer refer to a sk_buffer.
-
-Return Value:
-    0
-
-Note:
-	This function is the entry point of Tx Path for Os delivery packet to
-	our driver. You only can put OS-depened & STA/AP common handle procedures
-	in here.
-========================================================================
-*/
-int rt28xx_packet_xmit(struct sk_buff *skb)
-{
-	struct net_device *net_dev = skb->dev;
-	PRTMP_ADAPTER pAd = net_dev->ml_priv;
-	int status = 0;
-	PNDIS_PACKET pPacket = (PNDIS_PACKET) skb;
-
-	/* RT2870STA does this in RTMPSendPackets() */
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-	{
-		RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_RESOURCES);
-		return 0;
-	}
-#endif // RALINK_ATE //
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// Drop send request since we are in monitor mode
-		if (MONITOR_ON(pAd))
-		{
-			RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
-			goto done;
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-        // EapolStart size is 18
-	if (skb->len < 14)
-	{
-		//printk("bad packet size: %d\n", pkt->len);
-		hex_dump("bad packet", skb->data, skb->len);
-		RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
-		goto done;
-	}
-
-#if 0
-//	if ((pkt->data[0] & 0x1) == 0)
-	{
-		//hex_dump(__func__, pkt->data, pkt->len);
-		printk("pPacket = %x\n", pPacket);
-	}
-#endif
-
-	RTMP_SET_PACKET_5VT(pPacket, 0);
-//	MiniportMMRequest(pAd, pkt->data, pkt->len);
-#ifdef CONFIG_5VT_ENHANCE
-    if (*(int*)(skb->cb) == BRIDGE_TAG) {
-		RTMP_SET_PACKET_5VT(pPacket, 1);
-    }
-#endif
-
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-
-		STASendPackets((NDIS_HANDLE)pAd, (PPNDIS_PACKET) &pPacket, 1);
-	}
-
-#endif // CONFIG_STA_SUPPORT //
-
-	status = 0;
-done:
-
-	return status;
-}
-
-
-/*
-========================================================================
-Routine Description:
-    Send a packet to WLAN.
-
-Arguments:
-    skb_p           points to our adapter
-    dev_p           which WLAN network interface
-
-Return Value:
-    0: transmit successfully
-    otherwise: transmit fail
-
-Note:
-========================================================================
-*/
-INT rt28xx_send_packets(
-	IN struct sk_buff 		*skb_p,
-	IN struct net_device 	*net_dev)
-{
-    RTMP_ADAPTER *pAd = net_dev->ml_priv;
-
-	if (!(net_dev->flags & IFF_UP))
-	{
-		RELEASE_NDIS_PACKET(pAd, (PNDIS_PACKET)skb_p, NDIS_STATUS_FAILURE);
-		return 0;
-	}
-
-	NdisZeroMemory((PUCHAR)&skb_p->cb[CB_OFF], 15);
-	RTMP_SET_PACKET_NET_DEVICE_MBSSID(skb_p, MAIN_MBSSID);
-
-	return rt28xx_packet_xmit(skb_p);
-} /* End of MBSS_VirtualIF_PacketSend */
-
-
-
-
-#if LINUX_VERSION_CODE <= 0x20402	// Red Hat 7.1
-//static struct net_device *alloc_netdev(int sizeof_priv, const char *mask, void (*setup)(struct net_device *)) //sample
-struct net_device *alloc_netdev(
-	int sizeof_priv,
-	const char *mask,
-	void (*setup)(struct net_device *))
-{
-    struct net_device	*dev;
-    INT					alloc_size;
-
-
-    /* ensure 32-byte alignment of the private area */
-    alloc_size = sizeof (*dev) + sizeof_priv + 31;
-
-    dev = (struct net_device *) kmalloc(alloc_size, GFP_KERNEL);
-    if (dev == NULL)
-    {
-        DBGPRINT(RT_DEBUG_ERROR,
-				("alloc_netdev: Unable to allocate device memory.\n"));
-        return NULL;
-    }
-
-    memset(dev, 0, alloc_size);
-
-    if (sizeof_priv)
-        dev->priv = (void *) (((long)(dev + 1) + 31) & ~31);
-
-    setup(dev);
-    strcpy(dev->name, mask);
-
-    return dev;
-}
-#endif // LINUX_VERSION_CODE //
-
-
-void CfgInitHook(PRTMP_ADAPTER pAd)
-{
-	pAd->bBroadComHT = TRUE;
-} /* End of CfgInitHook */
-
-
-#if 0	// Not used now, should keep it in our source tree??
-/*
-========================================================================
-Routine Description:
-    Find and assign a free interface name (raxx).
-
-Arguments:
-    *name_p				the interface name pointer
-
-Return Value:
-	TRUE				OK
-	FALSE				FAIL
-
-Note:
-========================================================================
-*/
-static BOOLEAN RT28XXAvailRANameAssign(
-	IN CHAR			*name_p)
-{
-    CHAR				slot_name[IFNAMSIZ];
-    struct net_device	*device;
-	UINT32				if_id;
-
-
-    for(if_id=0; if_id<8; if_id++)
-    {
-        sprintf(slot_name, "ra%d", if_id);
-
-        for(device=dev_base; device!=NULL; device=device->next)
-        {
-            if (strncmp(device->name, slot_name, 4) == 0)
-                break;
-        }
-
-        if (device == NULL)
-			break;
-    }
-
-    if (if_id == 8)
-    {
-        DBGPRINT(RT_DEBUG_ERROR, ("No available slot name\n"));
-        return FALSE;
-    }
-
-    sprintf(name_p, "ra%d", if_id);
-	return TRUE;
-} /* End of RT28XXAvailRANameAssign */
-#endif
-
-#if WIRELESS_EXT >= 12
-// This function will be called when query /proc
-struct iw_statistics *rt28xx_get_wireless_stats(
-    IN struct net_device *net_dev)
-{
-	PRTMP_ADAPTER pAd = net_dev->ml_priv;
-
-
-	DBGPRINT(RT_DEBUG_TRACE, ("rt28xx_get_wireless_stats --->\n"));
-
-	pAd->iw_stats.status = 0; // Status - device dependent for now
-
-	// link quality
-	pAd->iw_stats.qual.qual = ((pAd->Mlme.ChannelQuality * 12)/10 + 10);
-	if(pAd->iw_stats.qual.qual > 100)
-		pAd->iw_stats.qual.qual = 100;
-
-#ifdef CONFIG_STA_SUPPORT
-	if (pAd->OpMode == OPMODE_STA)
-		pAd->iw_stats.qual.level = RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.LastRssi0, pAd->StaCfg.RssiSample.LastRssi1, pAd->StaCfg.RssiSample.LastRssi2);
-#endif // CONFIG_STA_SUPPORT //
-
-	pAd->iw_stats.qual.noise = pAd->BbpWriteLatch[66]; // noise level (dBm)
-
-	pAd->iw_stats.qual.noise += 256 - 143;
-	pAd->iw_stats.qual.updated = 1;     // Flags to know if updated
-#ifdef IW_QUAL_DBM
-	pAd->iw_stats.qual.updated |= IW_QUAL_DBM;	// Level + Noise are dBm
-#endif // IW_QUAL_DBM //
-
-	pAd->iw_stats.discard.nwid = 0;     // Rx : Wrong nwid/essid
-	pAd->iw_stats.miss.beacon = 0;      // Missed beacons/superframe
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<--- rt28xx_get_wireless_stats\n"));
-	return &pAd->iw_stats;
-} /* End of rt28xx_get_wireless_stats */
-#endif // WIRELESS_EXT //
-
-
-
-void tbtt_tasklet(unsigned long data)
-{
-#define MAX_TX_IN_TBTT		(16)
-
-}
-
-INT rt28xx_ioctl(
-	IN	struct net_device	*net_dev,
-	IN	OUT	struct ifreq	*rq,
-	IN	INT					cmd)
-{
-	VIRTUAL_ADAPTER	*pVirtualAd = NULL;
-	RTMP_ADAPTER	*pAd = NULL;
-	INT				ret = 0;
-
-	if (net_dev->priv_flags == INT_MAIN)
-	{
-		pAd = net_dev->ml_priv;
-	}
-	else
-	{
-		pVirtualAd = net_dev->ml_priv;
-		pAd = pVirtualAd->RtmpDev->ml_priv;
-	}
-
-	if (pAd == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->ml_priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		ret = rt28xx_sta_ioctl(net_dev, rq, cmd);
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	return ret;
-}
-
-/*
-    ========================================================================
-
-    Routine Description:
-        return ethernet statistics counter
-
-    Arguments:
-        net_dev                     Pointer to net_device
-
-    Return Value:
-        net_device_stats*
-
-    Note:
-
-    ========================================================================
-*/
-struct net_device_stats *RT28xx_get_ether_stats(
-    IN  struct net_device *net_dev)
-{
-    RTMP_ADAPTER *pAd = NULL;
-
-	if (net_dev)
-		pAd = net_dev->ml_priv;
-
-	if (pAd)
-	{
-
-		pAd->stats.rx_packets = pAd->WlanCounters.ReceivedFragmentCount.QuadPart;
-		pAd->stats.tx_packets = pAd->WlanCounters.TransmittedFragmentCount.QuadPart;
-
-		pAd->stats.rx_bytes = pAd->RalinkCounters.ReceivedByteCount;
-		pAd->stats.tx_bytes = pAd->RalinkCounters.TransmittedByteCount;
-
-		pAd->stats.rx_errors = pAd->Counters8023.RxErrors;
-		pAd->stats.tx_errors = pAd->Counters8023.TxErrors;
-
-		pAd->stats.rx_dropped = 0;
-		pAd->stats.tx_dropped = 0;
-
-	    pAd->stats.multicast = pAd->WlanCounters.MulticastReceivedFrameCount.QuadPart;   // multicast packets received
-	    pAd->stats.collisions = pAd->Counters8023.OneCollision + pAd->Counters8023.MoreCollisions;  // Collision packets
-
-	    pAd->stats.rx_length_errors = 0;
-	    pAd->stats.rx_over_errors = pAd->Counters8023.RxNoBuffer;                   // receiver ring buff overflow
-	    pAd->stats.rx_crc_errors = 0;//pAd->WlanCounters.FCSErrorCount;     // recved pkt with crc error
-	    pAd->stats.rx_frame_errors = pAd->Counters8023.RcvAlignmentErrors;          // recv'd frame alignment error
-	    pAd->stats.rx_fifo_errors = pAd->Counters8023.RxNoBuffer;                   // recv'r fifo overrun
-	    pAd->stats.rx_missed_errors = 0;                                            // receiver missed packet
-
-	    // detailed tx_errors
-	    pAd->stats.tx_aborted_errors = 0;
-	    pAd->stats.tx_carrier_errors = 0;
-	    pAd->stats.tx_fifo_errors = 0;
-	    pAd->stats.tx_heartbeat_errors = 0;
-	    pAd->stats.tx_window_errors = 0;
-
-	    // for cslip etc
-	    pAd->stats.rx_compressed = 0;
-	    pAd->stats.tx_compressed = 0;
-
-		return &pAd->stats;
-	}
-	else
-    	return NULL;
-}
-
+#include "../rt2860/rt_main_dev.c"
diff --git a/drivers/staging/rt2870/rt_profile.c b/drivers/staging/rt2870/rt_profile.c
index 467fea35e4a..15988c5d9df 100644
--- a/drivers/staging/rt2870/rt_profile.c
+++ b/drivers/staging/rt2870/rt_profile.c
@@ -1,2020 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-#include "rt_config.h"
-
-#ifdef DOT11_N_SUPPORT
-static void HTParametersHook(
-	IN	PRTMP_ADAPTER pAd,
-	IN	CHAR		  *pValueStr,
-	IN	CHAR		  *pInput);
-#endif // DOT11_N_SUPPORT //
-
-#define ETH_MAC_ADDR_STR_LEN 17  // in format of xx:xx:xx:xx:xx:xx
-
-// We assume the s1 is a sting, s2 is a memory space with 6 bytes. and content of s1 will be changed.
-BOOLEAN rtstrmactohex(char *s1, char *s2)
-{
-	int i = 0;
-	char *ptokS = s1, *ptokE = s1;
-
-	if (strlen(s1) != ETH_MAC_ADDR_STR_LEN)
-		return FALSE;
-
-	while((*ptokS) != '\0')
-	{
-		if((ptokE = strchr(ptokS, ':')) != NULL)
-			*ptokE++ = '\0';
-		if ((strlen(ptokS) != 2) || (!isxdigit(*ptokS)) || (!isxdigit(*(ptokS+1))))
-			break; // fail
-		AtoH(ptokS, &s2[i++], 1);
-		ptokS = ptokE;
-		if (i == 6)
-			break; // parsing finished
-	}
-
-	return ( i == 6 ? TRUE : FALSE);
-
-}
-
-
-// we assume the s1 and s2 both are strings.
-BOOLEAN rtstrcasecmp(char *s1, char *s2)
-{
-	char *p1 = s1, *p2 = s2;
-
-	if (strlen(s1) != strlen(s2))
-		return FALSE;
-
-	while(*p1 != '\0')
-	{
-		if((*p1 != *p2) && ((*p1 ^ *p2) != 0x20))
-			return FALSE;
-		p1++;
-		p2++;
-	}
-
-	return TRUE;
-}
-
-// we assume the s1 (buffer) and s2 (key) both are strings.
-char * rtstrstruncasecmp(char * s1, char * s2)
-{
-	INT l1, l2, i;
-	char temp1, temp2;
-
-	l2 = strlen(s2);
-	if (!l2)
-		return (char *) s1;
-
-	l1 = strlen(s1);
-
-	while (l1 >= l2)
-	{
-		l1--;
-
-		for(i=0; i<l2; i++)
-		{
-			temp1 = *(s1+i);
-			temp2 = *(s2+i);
-
-			if (('a' <= temp1) && (temp1 <= 'z'))
-				temp1 = 'A'+(temp1-'a');
-			if (('a' <= temp2) && (temp2 <= 'z'))
-				temp2 = 'A'+(temp2-'a');
-
-			if (temp1 != temp2)
-				break;
-		}
-
-		if (i == l2)
-			return (char *) s1;
-
-		s1++;
-	}
-
-	return NULL; // not found
-}
-
-//add by kathy
-
- /**
-  * strstr - Find the first substring in a %NUL terminated string
-  * @s1: The string to be searched
-  * @s2: The string to search for
-  */
-char * rtstrstr(const char * s1,const char * s2)
-{
-	INT l1, l2;
-
-	l2 = strlen(s2);
-	if (!l2)
-		return (char *) s1;
-
-	l1 = strlen(s1);
-
-	while (l1 >= l2)
-	{
-		l1--;
-		if (!memcmp(s1,s2,l2))
-			return (char *) s1;
-		s1++;
-	}
-
-	return NULL;
-}
-
-/**
- * rstrtok - Split a string into tokens
- * @s: The string to be searched
- * @ct: The characters to search for
- * * WARNING: strtok is deprecated, use strsep instead. However strsep is not compatible with old architecture.
- */
-char * __rstrtok;
-char * rstrtok(char * s,const char * ct)
-{
-	char *sbegin, *send;
-
-	sbegin  = s ? s : __rstrtok;
-	if (!sbegin)
-	{
-		return NULL;
-	}
-
-	sbegin += strspn(sbegin,ct);
-	if (*sbegin == '\0')
-	{
-		__rstrtok = NULL;
-		return( NULL );
-	}
-
-	send = strpbrk( sbegin, ct);
-	if (send && *send != '\0')
-		*send++ = '\0';
-
-	__rstrtok = send;
-
-	return (sbegin);
-}
-
-/**
- * delimitcnt - return the count of a given delimiter in a given string.
- * @s: The string to be searched.
- * @ct: The delimiter to search for.
- * Notice : We suppose the delimiter is a single-char string(for example : ";").
- */
-INT delimitcnt(char * s,const char * ct)
-{
-	INT count = 0;
-	/* point to the beginning of the line */
-	const char *token = s;
-
-	for ( ;; )
-	{
-		token = strpbrk(token, ct); /* search for delimiters */
-
-        if ( token == NULL )
-		{
-			/* advanced to the terminating null character */
-			break;
-		}
-		/* skip the delimiter */
-	    ++token;
-
-		/*
-		 * Print the found text: use len with %.*s to specify field width.
-		 */
-
-		/* accumulate delimiter count */
-	    ++count;
-	}
-    return count;
-}
-
-/*
-  * converts the Internet host address from the standard numbers-and-dots notation
-  * into binary data.
-  * returns nonzero if the address is valid, zero if not.
-  */
-int rtinet_aton(const char *cp, unsigned int *addr)
-{
-	unsigned int 	val;
-	int         	base, n;
-	char        	c;
-	unsigned int    parts[4];
-	unsigned int    *pp = parts;
-
-	for (;;)
-    {
-         /*
-          * Collect number up to ``.''.
-          * Values are specified as for C:
-          *	0x=hex, 0=octal, other=decimal.
-          */
-         val = 0;
-         base = 10;
-         if (*cp == '0')
-         {
-             if (*++cp == 'x' || *cp == 'X')
-                 base = 16, cp++;
-             else
-                 base = 8;
-         }
-         while ((c = *cp) != '\0')
-         {
-             if (isdigit((unsigned char) c))
-             {
-                 val = (val * base) + (c - '0');
-                 cp++;
-                 continue;
-             }
-             if (base == 16 && isxdigit((unsigned char) c))
-             {
-                 val = (val << 4) +
-                     (c + 10 - (islower((unsigned char) c) ? 'a' : 'A'));
-                 cp++;
-                 continue;
-             }
-             break;
-         }
-         if (*cp == '.')
-         {
-             /*
-              * Internet format: a.b.c.d a.b.c   (with c treated as 16-bits)
-              * a.b     (with b treated as 24 bits)
-              */
-             if (pp >= parts + 3 || val > 0xff)
-                 return 0;
-             *pp++ = val, cp++;
-         }
-         else
-             break;
-     }
-
-     /*
-      * Check for trailing junk.
-      */
-     while (*cp)
-         if (!isspace((unsigned char) *cp++))
-             return 0;
-
-     /*
-      * Concoct the address according to the number of parts specified.
-      */
-     n = pp - parts + 1;
-     switch (n)
-     {
-
-         case 1:         /* a -- 32 bits */
-             break;
-
-         case 2:         /* a.b -- 8.24 bits */
-             if (val > 0xffffff)
-                 return 0;
-             val |= parts[0] << 24;
-             break;
-
-         case 3:         /* a.b.c -- 8.8.16 bits */
-             if (val > 0xffff)
-                 return 0;
-             val |= (parts[0] << 24) | (parts[1] << 16);
-             break;
-
-         case 4:         /* a.b.c.d -- 8.8.8.8 bits */
-             if (val > 0xff)
-                 return 0;
-             val |= (parts[0] << 24) | (parts[1] << 16) | (parts[2] << 8);
-             break;
-     }
-
-     *addr = htonl(val);
-     return 1;
-
-}
-
-/*
-    ========================================================================
-
-    Routine Description:
-        Find key section for Get key parameter.
-
-    Arguments:
-        buffer                      Pointer to the buffer to start find the key section
-        section                     the key of the secion to be find
-
-    Return Value:
-        NULL                        Fail
-        Others                      Success
-    ========================================================================
-*/
-PUCHAR  RTMPFindSection(
-    IN  PCHAR   buffer)
-{
-    CHAR temp_buf[32];
-    PUCHAR  ptr;
-
-    strcpy(temp_buf, "Default");
-
-    if((ptr = rtstrstr(buffer, temp_buf)) != NULL)
-            return (ptr+strlen("\n"));
-        else
-            return NULL;
-}
-
-/*
-    ========================================================================
-
-    Routine Description:
-        Get key parameter.
-
-    Arguments:
-        key                         Pointer to key string
-        dest                        Pointer to destination
-        destsize                    The datasize of the destination
-        buffer                      Pointer to the buffer to start find the key
-
-    Return Value:
-        TRUE                        Success
-        FALSE                       Fail
-
-    Note:
-        This routine get the value with the matched key (case case-sensitive)
-    ========================================================================
-*/
-INT RTMPGetKeyParameter(
-    IN  PCHAR   key,
-    OUT PCHAR   dest,
-    IN  INT     destsize,
-    IN  PCHAR   buffer)
-{
-    UCHAR *temp_buf1 = NULL;
-    UCHAR *temp_buf2 = NULL;
-    CHAR *start_ptr;
-    CHAR *end_ptr;
-    CHAR *ptr;
-    CHAR *offset = 0;
-    INT  len;
-
-	//temp_buf1 = kmalloc(MAX_PARAM_BUFFER_SIZE, MEM_ALLOC_FLAG);
-	os_alloc_mem(NULL, &temp_buf1, MAX_PARAM_BUFFER_SIZE);
-
-	if(temp_buf1 == NULL)
-        return (FALSE);
-
-	//temp_buf2 = kmalloc(MAX_PARAM_BUFFER_SIZE, MEM_ALLOC_FLAG);
-	os_alloc_mem(NULL, &temp_buf2, MAX_PARAM_BUFFER_SIZE);
-	if(temp_buf2 == NULL)
-	{
-		os_free_mem(NULL, temp_buf1);
-        return (FALSE);
-	}
-
-    //find section
-    if((offset = RTMPFindSection(buffer)) == NULL)
-    {
-    	os_free_mem(NULL, temp_buf1);
-    	os_free_mem(NULL, temp_buf2);
-        return (FALSE);
-    }
-
-    strcpy(temp_buf1, "\n");
-    strcat(temp_buf1, key);
-    strcat(temp_buf1, "=");
-
-    //search key
-    if((start_ptr=rtstrstr(offset, temp_buf1))==NULL)
-    {
-		os_free_mem(NULL, temp_buf1);
-    	os_free_mem(NULL, temp_buf2);
-        return (FALSE);
-    }
-
-    start_ptr+=strlen("\n");
-    if((end_ptr=rtstrstr(start_ptr, "\n"))==NULL)
-       end_ptr=start_ptr+strlen(start_ptr);
-
-    if (end_ptr<start_ptr)
-    {
-		os_free_mem(NULL, temp_buf1);
-    	os_free_mem(NULL, temp_buf2);
-        return (FALSE);
-    }
-
-    NdisMoveMemory(temp_buf2, start_ptr, end_ptr-start_ptr);
-    temp_buf2[end_ptr-start_ptr]='\0';
-    len = strlen(temp_buf2);
-    strcpy(temp_buf1, temp_buf2);
-    if((start_ptr=rtstrstr(temp_buf1, "=")) == NULL)
-    {
-		os_free_mem(NULL, temp_buf1);
-    	os_free_mem(NULL, temp_buf2);
-        return (FALSE);
-    }
-
-    strcpy(temp_buf2, start_ptr+1);
-    ptr = temp_buf2;
-    //trim space or tab
-    while(*ptr != 0x00)
-    {
-        if( (*ptr == ' ') || (*ptr == '\t') )
-            ptr++;
-        else
-           break;
-    }
-
-    len = strlen(ptr);
-    memset(dest, 0x00, destsize);
-    strncpy(dest, ptr, len >= destsize ?  destsize: len);
-
-	os_free_mem(NULL, temp_buf1);
-    os_free_mem(NULL, temp_buf2);
-    return TRUE;
-}
-
-/*
-    ========================================================================
-
-    Routine Description:
-        Get key parameter.
-
-    Arguments:
-        key                         Pointer to key string
-        dest                        Pointer to destination
-        destsize                    The datasize of the destination
-        buffer                      Pointer to the buffer to start find the key
-
-    Return Value:
-        TRUE                        Success
-        FALSE                       Fail
-
-    Note:
-        This routine get the value with the matched key (case case-sensitive).
-        It is called for parsing SSID and any key string.
-    ========================================================================
-*/
-INT RTMPGetCriticalParameter(
-    IN  PCHAR   key,
-    OUT PCHAR   dest,
-    IN  INT     destsize,
-    IN  PCHAR   buffer)
-{
-    UCHAR *temp_buf1 = NULL;
-    UCHAR *temp_buf2 = NULL;
-    CHAR *start_ptr;
-    CHAR *end_ptr;
-    CHAR *ptr;
-    CHAR *offset = 0;
-    INT  len;
-
-	//temp_buf1 = kmalloc(MAX_PARAM_BUFFER_SIZE, MEM_ALLOC_FLAG);
-	os_alloc_mem(NULL, &temp_buf1, MAX_PARAM_BUFFER_SIZE);
-
-	if(temp_buf1 == NULL)
-        return (FALSE);
-
-	//temp_buf2 = kmalloc(MAX_PARAM_BUFFER_SIZE, MEM_ALLOC_FLAG);
-	os_alloc_mem(NULL, &temp_buf2, MAX_PARAM_BUFFER_SIZE);
-	if(temp_buf2 == NULL)
-	{
-		os_free_mem(NULL, temp_buf1);
-        return (FALSE);
-	}
-
-    //find section
-    if((offset = RTMPFindSection(buffer)) == NULL)
-    {
-    	os_free_mem(NULL, temp_buf1);
-    	os_free_mem(NULL, temp_buf2);
-        return (FALSE);
-    }
-
-    strcpy(temp_buf1, "\n");
-    strcat(temp_buf1, key);
-    strcat(temp_buf1, "=");
-
-    //search key
-    if((start_ptr=rtstrstr(offset, temp_buf1))==NULL)
-    {
-		os_free_mem(NULL, temp_buf1);
-    	os_free_mem(NULL, temp_buf2);
-        return (FALSE);
-    }
-
-    start_ptr+=strlen("\n");
-    if((end_ptr=rtstrstr(start_ptr, "\n"))==NULL)
-       end_ptr=start_ptr+strlen(start_ptr);
-
-    if (end_ptr<start_ptr)
-    {
-		os_free_mem(NULL, temp_buf1);
-    	os_free_mem(NULL, temp_buf2);
-        return (FALSE);
-    }
-
-    NdisMoveMemory(temp_buf2, start_ptr, end_ptr-start_ptr);
-    temp_buf2[end_ptr-start_ptr]='\0';
-    len = strlen(temp_buf2);
-    strcpy(temp_buf1, temp_buf2);
-    if((start_ptr=rtstrstr(temp_buf1, "=")) == NULL)
-    {
-		os_free_mem(NULL, temp_buf1);
-    	os_free_mem(NULL, temp_buf2);
-        return (FALSE);
-    }
-
-    strcpy(temp_buf2, start_ptr+1);
-    ptr = temp_buf2;
-
-    //trim tab
-    /* We cannot trim space(' ') for SSID and key string. */
-    while(*ptr != 0x00)
-    {
-        //if( (*ptr == ' ') || (*ptr == '\t') )
-        if( (*ptr == '\t') )
-            ptr++;
-        else
-           break;
-    }
-
-    len = strlen(ptr);
-    memset(dest, 0x00, destsize);
-    strncpy(dest, ptr, len >= destsize ?  destsize: len);
-
-	os_free_mem(NULL, temp_buf1);
-    os_free_mem(NULL, temp_buf2);
-    return TRUE;
-}
-
-/*
-    ========================================================================
-
-    Routine Description:
-        Get multiple key parameter.
-
-    Arguments:
-        key                         Pointer to key string
-        dest                        Pointer to destination
-        destsize                    The datasize of the destination
-        buffer                      Pointer to the buffer to start find the key
-
-    Return Value:
-        TRUE                        Success
-        FALSE                       Fail
-
-    Note:
-        This routine get the value with the matched key (case case-sensitive)
-    ========================================================================
-*/
-INT RTMPGetKeyParameterWithOffset(
-    IN  PCHAR   key,
-    OUT PCHAR   dest,
-    OUT	USHORT	*end_offset,
-    IN  INT     destsize,
-    IN  PCHAR   buffer,
-    IN	BOOLEAN	bTrimSpace)
-{
-    UCHAR *temp_buf1 = NULL;
-    UCHAR *temp_buf2 = NULL;
-    CHAR *start_ptr;
-    CHAR *end_ptr;
-    CHAR *ptr;
-    CHAR *offset = 0;
-    INT  len;
-
-	if (*end_offset >= MAX_INI_BUFFER_SIZE)
-		return (FALSE);
-
-	os_alloc_mem(NULL, &temp_buf1, MAX_PARAM_BUFFER_SIZE);
-
-	if(temp_buf1 == NULL)
-        return (FALSE);
-
-	os_alloc_mem(NULL, &temp_buf2, MAX_PARAM_BUFFER_SIZE);
-	if(temp_buf2 == NULL)
-	{
-		os_free_mem(NULL, temp_buf1);
-        return (FALSE);
-	}
-
-    //find section
-	if(*end_offset == 0)
-    {
-		if ((offset = RTMPFindSection(buffer)) == NULL)
-		{
-			os_free_mem(NULL, temp_buf1);
-	    	os_free_mem(NULL, temp_buf2);
-    	    return (FALSE);
-		}
-    }
-	else
-		offset = buffer + (*end_offset);
-
-    strcpy(temp_buf1, "\n");
-    strcat(temp_buf1, key);
-    strcat(temp_buf1, "=");
-
-    //search key
-    if((start_ptr=rtstrstr(offset, temp_buf1))==NULL)
-    {
-		os_free_mem(NULL, temp_buf1);
-    	os_free_mem(NULL, temp_buf2);
-        return (FALSE);
-    }
-
-    start_ptr+=strlen("\n");
-    if((end_ptr=rtstrstr(start_ptr, "\n"))==NULL)
-       end_ptr=start_ptr+strlen(start_ptr);
-
-    if (end_ptr<start_ptr)
-    {
-		os_free_mem(NULL, temp_buf1);
-    	os_free_mem(NULL, temp_buf2);
-        return (FALSE);
-    }
-
-	*end_offset = end_ptr - buffer;
-
-    NdisMoveMemory(temp_buf2, start_ptr, end_ptr-start_ptr);
-    temp_buf2[end_ptr-start_ptr]='\0';
-    len = strlen(temp_buf2);
-    strcpy(temp_buf1, temp_buf2);
-    if((start_ptr=rtstrstr(temp_buf1, "=")) == NULL)
-    {
-		os_free_mem(NULL, temp_buf1);
-    	os_free_mem(NULL, temp_buf2);
-        return (FALSE);
-    }
-
-    strcpy(temp_buf2, start_ptr+1);
-    ptr = temp_buf2;
-    //trim space or tab
-    while(*ptr != 0x00)
-    {
-        if((bTrimSpace && (*ptr == ' ')) || (*ptr == '\t') )
-            ptr++;
-        else
-           break;
-    }
-
-    len = strlen(ptr);
-    memset(dest, 0x00, destsize);
-    strncpy(dest, ptr, len >= destsize ?  destsize: len);
-
-	os_free_mem(NULL, temp_buf1);
-    os_free_mem(NULL, temp_buf2);
-    return TRUE;
-}
-
-
-static int rtmp_parse_key_buffer_from_file(IN  PRTMP_ADAPTER pAd,IN  char *buffer,IN  ULONG KeyType,IN  INT BSSIdx,IN  INT KeyIdx)
-{
-	PUCHAR		keybuff;
-	INT			i = BSSIdx, idx = KeyIdx;
-	ULONG		KeyLen;
-	UCHAR		CipherAlg = CIPHER_WEP64;
-
-	keybuff = buffer;
-	KeyLen = strlen(keybuff);
-
-	if (KeyType == 1)
-	{//Ascii
-		if( (KeyLen == 5) || (KeyLen == 13))
-		{
-			pAd->SharedKey[i][idx].KeyLen = KeyLen;
-			NdisMoveMemory(pAd->SharedKey[i][idx].Key, keybuff, KeyLen);
-			if (KeyLen == 5)
-				CipherAlg = CIPHER_WEP64;
-			else
-				CipherAlg = CIPHER_WEP128;
-			pAd->SharedKey[i][idx].CipherAlg = CipherAlg;
-
-			DBGPRINT(RT_DEBUG_TRACE, ("I/F(ra%d) Key%dStr=%s and type=%s\n", i, idx+1, keybuff, (KeyType == 0) ? "Hex":"Ascii"));
-			return 1;
-		}
-		else
-		{//Invalid key length
-			DBGPRINT(RT_DEBUG_ERROR, ("Key%dStr is Invalid key length! KeyLen = %ld!\n", idx+1, KeyLen));
-			return 0;
-		}
-	}
-	else
-	{//Hex type
-		if( (KeyLen == 10) || (KeyLen == 26))
-		{
-			pAd->SharedKey[i][idx].KeyLen = KeyLen / 2;
-			AtoH(keybuff, pAd->SharedKey[i][idx].Key, KeyLen / 2);
-			if (KeyLen == 10)
-				CipherAlg = CIPHER_WEP64;
-			else
-				CipherAlg = CIPHER_WEP128;
-			pAd->SharedKey[i][idx].CipherAlg = CipherAlg;
-
-			DBGPRINT(RT_DEBUG_TRACE, ("I/F(ra%d) Key%dStr=%s and type=%s\n", i, idx+1, keybuff, (KeyType == 0) ? "Hex":"Ascii"));
-			return 1;
-		}
-		else
-		{//Invalid key length
-			DBGPRINT(RT_DEBUG_ERROR, ("I/F(ra%d) Key%dStr is Invalid key length! KeyLen = %ld!\n", i, idx+1, KeyLen));
-			return 0;
-		}
-	}
-}
-static void rtmp_read_key_parms_from_file(IN  PRTMP_ADAPTER pAd, char *tmpbuf, char *buffer)
-{
-	char		tok_str[16];
-	PUCHAR		macptr;
-	INT			i = 0, idx;
-	ULONG		KeyType[MAX_MBSSID_NUM];
-	ULONG		KeyIdx;
-
-	NdisZeroMemory(KeyType, MAX_MBSSID_NUM);
-
-	//DefaultKeyID
-	if(RTMPGetKeyParameter("DefaultKeyID", tmpbuf, 25, buffer))
-	{
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			KeyIdx = simple_strtol(tmpbuf, 0, 10);
-			if((KeyIdx >= 1 ) && (KeyIdx <= 4))
-				pAd->StaCfg.DefaultKeyId = (UCHAR) (KeyIdx - 1);
-			else
-				pAd->StaCfg.DefaultKeyId = 0;
-
-			DBGPRINT(RT_DEBUG_TRACE, ("DefaultKeyID(0~3)=%d\n", pAd->StaCfg.DefaultKeyId));
-		}
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-
-	for (idx = 0; idx < 4; idx++)
-	{
-		sprintf(tok_str, "Key%dType", idx + 1);
-		//Key1Type
-		if (RTMPGetKeyParameter(tok_str, tmpbuf, 128, buffer))
-		{
-		    for (i = 0, macptr = rstrtok(tmpbuf,";"); macptr; macptr = rstrtok(NULL,";"), i++)
-		    {
-			    KeyType[i] = simple_strtol(macptr, 0, 10);
-		    }
-
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			{
-				sprintf(tok_str, "Key%dStr", idx + 1);
-				if (RTMPGetCriticalParameter(tok_str, tmpbuf, 128, buffer))
-				{
-					rtmp_parse_key_buffer_from_file(pAd, tmpbuf, KeyType[BSS0], BSS0, idx);
-				}
-			}
-#endif // CONFIG_STA_SUPPORT //
-		}
-	}
-}
-
-
-#ifdef CONFIG_STA_SUPPORT
-static void rtmp_read_sta_wmm_parms_from_file(IN  PRTMP_ADAPTER pAd, char *tmpbuf, char *buffer)
-{
-	PUCHAR					macptr;
-	INT						i=0;
-	BOOLEAN					bWmmEnable = FALSE;
-
-	//WmmCapable
-	if(RTMPGetKeyParameter("WmmCapable", tmpbuf, 32, buffer))
-	{
-		if(simple_strtol(tmpbuf, 0, 10) != 0) //Enable
-		{
-			pAd->CommonCfg.bWmmCapable = TRUE;
-			bWmmEnable = TRUE;
-		}
-		else //Disable
-		{
-			pAd->CommonCfg.bWmmCapable = FALSE;
-		}
-
-		DBGPRINT(RT_DEBUG_TRACE, ("WmmCapable=%d\n", pAd->CommonCfg.bWmmCapable));
-	}
-
-#ifdef QOS_DLS_SUPPORT
-	//DLSCapable
-	if(RTMPGetKeyParameter("DLSCapable", tmpbuf, 32, buffer))
-	{
-		if(simple_strtol(tmpbuf, 0, 10) != 0)  //Enable
-		{
-			pAd->CommonCfg.bDLSCapable = TRUE;
-		}
-		else //Disable
-		{
-			pAd->CommonCfg.bDLSCapable = FALSE;
-		}
-
-		DBGPRINT(RT_DEBUG_TRACE, ("bDLSCapable=%d\n", pAd->CommonCfg.bDLSCapable));
-	}
-#endif // QOS_DLS_SUPPORT //
-
-	//AckPolicy for AC_BK, AC_BE, AC_VI, AC_VO
-	if(RTMPGetKeyParameter("AckPolicy", tmpbuf, 32, buffer))
-	{
-		for (i = 0, macptr = rstrtok(tmpbuf,";"); macptr; macptr = rstrtok(NULL,";"), i++)
-		{
-			pAd->CommonCfg.AckPolicy[i] = (UCHAR)simple_strtol(macptr, 0, 10);
-
-			DBGPRINT(RT_DEBUG_TRACE, ("AckPolicy[%d]=%d\n", i, pAd->CommonCfg.AckPolicy[i]));
-		}
-	}
-
-	if (bWmmEnable)
-	{
-		//APSDCapable
-		if(RTMPGetKeyParameter("APSDCapable", tmpbuf, 10, buffer))
-		{
-			if(simple_strtol(tmpbuf, 0, 10) != 0)  //Enable
-				pAd->CommonCfg.bAPSDCapable = TRUE;
-			else
-				pAd->CommonCfg.bAPSDCapable = FALSE;
-
-			DBGPRINT(RT_DEBUG_TRACE, ("APSDCapable=%d\n", pAd->CommonCfg.bAPSDCapable));
-		}
-
-		//APSDAC for AC_BE, AC_BK, AC_VI, AC_VO
-		if(RTMPGetKeyParameter("APSDAC", tmpbuf, 32, buffer))
-		{
-			BOOLEAN apsd_ac[4];
-
-			for (i = 0, macptr = rstrtok(tmpbuf,";"); macptr; macptr = rstrtok(NULL,";"), i++)
-			{
-				apsd_ac[i] = (BOOLEAN)simple_strtol(macptr, 0, 10);
-
-				DBGPRINT(RT_DEBUG_TRACE, ("APSDAC%d  %d\n", i,  apsd_ac[i]));
-			}
-
-			pAd->CommonCfg.bAPSDAC_BE = apsd_ac[0];
-			pAd->CommonCfg.bAPSDAC_BK = apsd_ac[1];
-			pAd->CommonCfg.bAPSDAC_VI = apsd_ac[2];
-			pAd->CommonCfg.bAPSDAC_VO = apsd_ac[3];
-		}
-	}
-
-}
-#endif // CONFIG_STA_SUPPORT //
-
-
-NDIS_STATUS	RTMPReadParametersHook(
-	IN	PRTMP_ADAPTER pAd)
-{
-	PUCHAR					src = NULL;
-	struct file				*srcf;
-	INT 					retval, orgfsuid, orgfsgid;
-   	mm_segment_t			orgfs;
-	CHAR					*buffer;
-	CHAR					*tmpbuf;
-	ULONG					RtsThresh;
-	ULONG					FragThresh;
-#ifdef CONFIG_STA_SUPPORT
-	UCHAR	                keyMaterial[40];
-#endif // CONFIG_STA_SUPPORT //
-
-
-	PUCHAR					macptr;
-	INT						i = 0;
-
-	buffer = kmalloc(MAX_INI_BUFFER_SIZE, MEM_ALLOC_FLAG);
-	if(buffer == NULL)
-        return NDIS_STATUS_FAILURE;
-
-	tmpbuf = kmalloc(MAX_PARAM_BUFFER_SIZE, MEM_ALLOC_FLAG);
-	if(tmpbuf == NULL)
-	{
-		kfree(buffer);
-        return NDIS_STATUS_FAILURE;
-	}
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		src = STA_PROFILE_PATH;
-#endif // CONFIG_STA_SUPPORT //
-#ifdef MULTIPLE_CARD_SUPPORT
-	src = pAd->MC_FileName;
-#endif // MULTIPLE_CARD_SUPPORT //
-
-	// Save uid and gid used for filesystem access.
-	// Set user and group to 0 (root)
-	orgfsuid = current_fsuid();
-	orgfsgid = current_fsgid();
-	/* Hm, can't really do this nicely anymore, so rely on these files
-	 * being set to the proper permission to read them... */
-	/* current->cred->fsuid = current->cred->fsgid = 0; */
-    orgfs = get_fs();
-    set_fs(KERNEL_DS);
-
-	if (src && *src)
-	{
-		srcf = filp_open(src, O_RDONLY, 0);
-		if (IS_ERR(srcf))
-		{
-			DBGPRINT(RT_DEBUG_ERROR, ("--> Error %ld opening %s\n", -PTR_ERR(srcf),src));
-		}
-		else
-		{
-			// The object must have a read method
-			if (srcf->f_op && srcf->f_op->read)
-			{
-				memset(buffer, 0x00, MAX_INI_BUFFER_SIZE);
-				retval=srcf->f_op->read(srcf, buffer, MAX_INI_BUFFER_SIZE, &srcf->f_pos);
-				if (retval < 0)
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("--> Read %s error %d\n", src, -retval));
-				}
-				else
-				{
-					// set file parameter to portcfg
-					//CountryRegion
-					if(RTMPGetKeyParameter("CountryRegion", tmpbuf, 25, buffer))
-					{
-						pAd->CommonCfg.CountryRegion = (UCHAR) simple_strtol(tmpbuf, 0, 10);
-						DBGPRINT(RT_DEBUG_TRACE, ("CountryRegion=%d\n", pAd->CommonCfg.CountryRegion));
-					}
-					//CountryRegionABand
-					if(RTMPGetKeyParameter("CountryRegionABand", tmpbuf, 25, buffer))
-					{
-						pAd->CommonCfg.CountryRegionForABand= (UCHAR) simple_strtol(tmpbuf, 0, 10);
-						DBGPRINT(RT_DEBUG_TRACE, ("CountryRegionABand=%d\n", pAd->CommonCfg.CountryRegionForABand));
-					}
-					//CountryCode
-					if(RTMPGetKeyParameter("CountryCode", tmpbuf, 25, buffer))
-					{
-						NdisMoveMemory(pAd->CommonCfg.CountryCode, tmpbuf , 2);
-#ifdef CONFIG_STA_SUPPORT
-#ifdef EXT_BUILD_CHANNEL_LIST
-						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-							NdisMoveMemory(pAd->StaCfg.StaOriCountryCode, tmpbuf , 2);
-#endif // EXT_BUILD_CHANNEL_LIST //
-#endif // CONFIG_STA_SUPPORT //
-						if (strlen(pAd->CommonCfg.CountryCode) != 0)
-						{
-							pAd->CommonCfg.bCountryFlag = TRUE;
-						}
-						DBGPRINT(RT_DEBUG_TRACE, ("CountryCode=%s\n", pAd->CommonCfg.CountryCode));
-					}
-					//ChannelGeography
-					if(RTMPGetKeyParameter("ChannelGeography", tmpbuf, 25, buffer))
-					{
-						UCHAR Geography = (UCHAR) simple_strtol(tmpbuf, 0, 10);
-						if (Geography <= BOTH)
-						{
-							pAd->CommonCfg.Geography = Geography;
-							pAd->CommonCfg.CountryCode[2] =
-								(pAd->CommonCfg.Geography == BOTH) ? ' ' : ((pAd->CommonCfg.Geography == IDOR) ? 'I' : 'O');
-#ifdef CONFIG_STA_SUPPORT
-#ifdef EXT_BUILD_CHANNEL_LIST
-						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-							pAd->StaCfg.StaOriGeography = pAd->CommonCfg.Geography;
-#endif // EXT_BUILD_CHANNEL_LIST //
-#endif // CONFIG_STA_SUPPORT //
-							DBGPRINT(RT_DEBUG_TRACE, ("ChannelGeography=%d\n", pAd->CommonCfg.Geography));
-						}
-					}
-					else
-					{
-						pAd->CommonCfg.Geography = BOTH;
-						pAd->CommonCfg.CountryCode[2] = ' ';
-					}
-
-
-#ifdef CONFIG_STA_SUPPORT
-					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-					{
-						//SSID
-						if (RTMPGetCriticalParameter("SSID", tmpbuf, 256, buffer))
-						{
-							if (strlen(tmpbuf) <= 32)
-							{
-			 					pAd->CommonCfg.SsidLen = (UCHAR) strlen(tmpbuf);
-								NdisZeroMemory(pAd->CommonCfg.Ssid, NDIS_802_11_LENGTH_SSID);
-								NdisMoveMemory(pAd->CommonCfg.Ssid, tmpbuf, pAd->CommonCfg.SsidLen);
-								pAd->MlmeAux.AutoReconnectSsidLen = pAd->CommonCfg.SsidLen;
-								NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, NDIS_802_11_LENGTH_SSID);
-								NdisMoveMemory(pAd->MlmeAux.AutoReconnectSsid, tmpbuf, pAd->MlmeAux.AutoReconnectSsidLen);
-								pAd->MlmeAux.SsidLen = pAd->CommonCfg.SsidLen;
-								NdisZeroMemory(pAd->MlmeAux.Ssid, NDIS_802_11_LENGTH_SSID);
-								NdisMoveMemory(pAd->MlmeAux.Ssid, tmpbuf, pAd->MlmeAux.SsidLen);
-								DBGPRINT(RT_DEBUG_TRACE, ("%s::(SSID=%s)\n", __func__, tmpbuf));
-							}
-						}
-					}
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef CONFIG_STA_SUPPORT
-					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-					{
-						//NetworkType
-						if (RTMPGetKeyParameter("NetworkType", tmpbuf, 25, buffer))
-						{
-							pAd->bConfigChanged = TRUE;
-							if (strcmp(tmpbuf, "Adhoc") == 0)
-								pAd->StaCfg.BssType = BSS_ADHOC;
-							else //Default Infrastructure mode
-								pAd->StaCfg.BssType = BSS_INFRA;
-							// Reset Ralink supplicant to not use, it will be set to start when UI set PMK key
-							pAd->StaCfg.WpaState = SS_NOTUSE;
-							DBGPRINT(RT_DEBUG_TRACE, ("%s::(NetworkType=%d)\n", __func__, pAd->StaCfg.BssType));
-						}
-					}
-#endif // CONFIG_STA_SUPPORT //
-					//Channel
-					if(RTMPGetKeyParameter("Channel", tmpbuf, 10, buffer))
-					{
-						pAd->CommonCfg.Channel = (UCHAR) simple_strtol(tmpbuf, 0, 10);
-						DBGPRINT(RT_DEBUG_TRACE, ("Channel=%d\n", pAd->CommonCfg.Channel));
-					}
-					//WirelessMode
-					if(RTMPGetKeyParameter("WirelessMode", tmpbuf, 10, buffer))
-					{
-						int value  = 0, maxPhyMode = PHY_11G;
-
-#ifdef DOT11_N_SUPPORT
-						maxPhyMode = PHY_11N_5G;
-#endif // DOT11_N_SUPPORT //
-
-						value = simple_strtol(tmpbuf, 0, 10);
-
-						if (value <= maxPhyMode)
-						{
-							pAd->CommonCfg.PhyMode = value;
-						}
-						DBGPRINT(RT_DEBUG_TRACE, ("PhyMode=%d\n", pAd->CommonCfg.PhyMode));
-					}
-                    //BasicRate
-					if(RTMPGetKeyParameter("BasicRate", tmpbuf, 10, buffer))
-					{
-						pAd->CommonCfg.BasicRateBitmap = (ULONG) simple_strtol(tmpbuf, 0, 10);
-						DBGPRINT(RT_DEBUG_TRACE, ("BasicRate=%ld\n", pAd->CommonCfg.BasicRateBitmap));
-					}
-					//BeaconPeriod
-					if(RTMPGetKeyParameter("BeaconPeriod", tmpbuf, 10, buffer))
-					{
-						pAd->CommonCfg.BeaconPeriod = (USHORT) simple_strtol(tmpbuf, 0, 10);
-						DBGPRINT(RT_DEBUG_TRACE, ("BeaconPeriod=%d\n", pAd->CommonCfg.BeaconPeriod));
-					}
-                    //TxPower
-					if(RTMPGetKeyParameter("TxPower", tmpbuf, 10, buffer))
-					{
-						pAd->CommonCfg.TxPowerPercentage = (ULONG) simple_strtol(tmpbuf, 0, 10);
-#ifdef CONFIG_STA_SUPPORT
-						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-							pAd->CommonCfg.TxPowerDefault = pAd->CommonCfg.TxPowerPercentage;
-#endif // CONFIG_STA_SUPPORT //
-						DBGPRINT(RT_DEBUG_TRACE, ("TxPower=%ld\n", pAd->CommonCfg.TxPowerPercentage));
-					}
-					//BGProtection
-					if(RTMPGetKeyParameter("BGProtection", tmpbuf, 10, buffer))
-					{
-						switch (simple_strtol(tmpbuf, 0, 10))
-						{
-							case 1: //Always On
-								pAd->CommonCfg.UseBGProtection = 1;
-								break;
-							case 2: //Always OFF
-								pAd->CommonCfg.UseBGProtection = 2;
-								break;
-							case 0: //AUTO
-							default:
-								pAd->CommonCfg.UseBGProtection = 0;
-								break;
-						}
-						DBGPRINT(RT_DEBUG_TRACE, ("BGProtection=%ld\n", pAd->CommonCfg.UseBGProtection));
-					}
-					//OLBCDetection
-					if(RTMPGetKeyParameter("DisableOLBC", tmpbuf, 10, buffer))
-					{
-						switch (simple_strtol(tmpbuf, 0, 10))
-						{
-							case 1: //disable OLBC Detection
-								pAd->CommonCfg.DisableOLBCDetect = 1;
-								break;
-							case 0: //enable OLBC Detection
-								pAd->CommonCfg.DisableOLBCDetect = 0;
-								break;
-							default:
-								pAd->CommonCfg.DisableOLBCDetect= 0;
-								break;
-						}
-						DBGPRINT(RT_DEBUG_TRACE, ("OLBCDetection=%ld\n", pAd->CommonCfg.DisableOLBCDetect));
-					}
-					//TxPreamble
-					if(RTMPGetKeyParameter("TxPreamble", tmpbuf, 10, buffer))
-					{
-						switch (simple_strtol(tmpbuf, 0, 10))
-						{
-							case Rt802_11PreambleShort:
-								pAd->CommonCfg.TxPreamble = Rt802_11PreambleShort;
-								break;
-							case Rt802_11PreambleLong:
-							default:
-								pAd->CommonCfg.TxPreamble = Rt802_11PreambleLong;
-								break;
-						}
-						DBGPRINT(RT_DEBUG_TRACE, ("TxPreamble=%ld\n", pAd->CommonCfg.TxPreamble));
-					}
-					//RTSThreshold
-					if(RTMPGetKeyParameter("RTSThreshold", tmpbuf, 10, buffer))
-					{
-						RtsThresh = simple_strtol(tmpbuf, 0, 10);
-						if( (RtsThresh >= 1) && (RtsThresh <= MAX_RTS_THRESHOLD) )
-							pAd->CommonCfg.RtsThreshold  = (USHORT)RtsThresh;
-						else
-							pAd->CommonCfg.RtsThreshold = MAX_RTS_THRESHOLD;
-
-						DBGPRINT(RT_DEBUG_TRACE, ("RTSThreshold=%d\n", pAd->CommonCfg.RtsThreshold));
-					}
-					//FragThreshold
-					if(RTMPGetKeyParameter("FragThreshold", tmpbuf, 10, buffer))
-					{
-						FragThresh = simple_strtol(tmpbuf, 0, 10);
-						pAd->CommonCfg.bUseZeroToDisableFragment = FALSE;
-
-						if (FragThresh > MAX_FRAG_THRESHOLD || FragThresh < MIN_FRAG_THRESHOLD)
-						{ //illegal FragThresh so we set it to default
-							pAd->CommonCfg.FragmentThreshold = MAX_FRAG_THRESHOLD;
-							pAd->CommonCfg.bUseZeroToDisableFragment = TRUE;
-						}
-						else if (FragThresh % 2 == 1)
-						{
-							// The length of each fragment shall always be an even number of octets, except for the last fragment
-							// of an MSDU or MMPDU, which may be either an even or an odd number of octets.
-							pAd->CommonCfg.FragmentThreshold = (USHORT)(FragThresh - 1);
-						}
-						else
-						{
-							pAd->CommonCfg.FragmentThreshold = (USHORT)FragThresh;
-						}
-						//pAd->CommonCfg.AllowFragSize = (pAd->CommonCfg.FragmentThreshold) - LENGTH_802_11 - LENGTH_CRC;
-						DBGPRINT(RT_DEBUG_TRACE, ("FragThreshold=%d\n", pAd->CommonCfg.FragmentThreshold));
-					}
-					//TxBurst
-					if(RTMPGetKeyParameter("TxBurst", tmpbuf, 10, buffer))
-					{
-//#ifdef WIFI_TEST
-//						pAd->CommonCfg.bEnableTxBurst = FALSE;
-//#else
-						if(simple_strtol(tmpbuf, 0, 10) != 0)  //Enable
-							pAd->CommonCfg.bEnableTxBurst = TRUE;
-						else //Disable
-							pAd->CommonCfg.bEnableTxBurst = FALSE;
-//#endif
-						DBGPRINT(RT_DEBUG_TRACE, ("TxBurst=%d\n", pAd->CommonCfg.bEnableTxBurst));
-					}
-
-#ifdef AGGREGATION_SUPPORT
-					//PktAggregate
-					if(RTMPGetKeyParameter("PktAggregate", tmpbuf, 10, buffer))
-					{
-						if(simple_strtol(tmpbuf, 0, 10) != 0)  //Enable
-							pAd->CommonCfg.bAggregationCapable = TRUE;
-						else //Disable
-							pAd->CommonCfg.bAggregationCapable = FALSE;
-#ifdef PIGGYBACK_SUPPORT
-						pAd->CommonCfg.bPiggyBackCapable = pAd->CommonCfg.bAggregationCapable;
-#endif // PIGGYBACK_SUPPORT //
-						DBGPRINT(RT_DEBUG_TRACE, ("PktAggregate=%d\n", pAd->CommonCfg.bAggregationCapable));
-					}
-#else
-					pAd->CommonCfg.bAggregationCapable = FALSE;
-					pAd->CommonCfg.bPiggyBackCapable = FALSE;
-#endif // AGGREGATION_SUPPORT //
-
-					// WmmCapable
-
-#ifdef CONFIG_STA_SUPPORT
-					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-						rtmp_read_sta_wmm_parms_from_file(pAd, tmpbuf, buffer);
-#endif // CONFIG_STA_SUPPORT //
-
-					//ShortSlot
-					if(RTMPGetKeyParameter("ShortSlot", tmpbuf, 10, buffer))
-					{
-						if(simple_strtol(tmpbuf, 0, 10) != 0)  //Enable
-							pAd->CommonCfg.bUseShortSlotTime = TRUE;
-						else //Disable
-							pAd->CommonCfg.bUseShortSlotTime = FALSE;
-
-						DBGPRINT(RT_DEBUG_TRACE, ("ShortSlot=%d\n", pAd->CommonCfg.bUseShortSlotTime));
-					}
-					//IEEE80211H
-					if(RTMPGetKeyParameter("IEEE80211H", tmpbuf, 10, buffer))
-					{
-					    for (i = 0, macptr = rstrtok(tmpbuf,";"); macptr; macptr = rstrtok(NULL,";"), i++)
-					    {
-    						if(simple_strtol(macptr, 0, 10) != 0)  //Enable
-    							pAd->CommonCfg.bIEEE80211H = TRUE;
-    						else //Disable
-    							pAd->CommonCfg.bIEEE80211H = FALSE;
-
-    						DBGPRINT(RT_DEBUG_TRACE, ("IEEE80211H=%d\n", pAd->CommonCfg.bIEEE80211H));
-					    }
-					}
-					//CSPeriod
-					if(RTMPGetKeyParameter("CSPeriod", tmpbuf, 10, buffer))
-					{
-					    if(simple_strtol(tmpbuf, 0, 10) != 0)
-							pAd->CommonCfg.RadarDetect.CSPeriod = simple_strtol(tmpbuf, 0, 10);
-						else
-							pAd->CommonCfg.RadarDetect.CSPeriod = 0;
-
-   						DBGPRINT(RT_DEBUG_TRACE, ("CSPeriod=%d\n", pAd->CommonCfg.RadarDetect.CSPeriod));
-					}
-
-					//RDRegion
-					if(RTMPGetKeyParameter("RDRegion", tmpbuf, 128, buffer))
-					{
-						if ((strncmp(tmpbuf, "JAP_W53", 7) == 0) || (strncmp(tmpbuf, "jap_w53", 7) == 0))
-						{
-							pAd->CommonCfg.RadarDetect.RDDurRegion = JAP_W53;
-							pAd->CommonCfg.RadarDetect.DfsSessionTime = 15;
-						}
-						else if ((strncmp(tmpbuf, "JAP_W56", 7) == 0) || (strncmp(tmpbuf, "jap_w56", 7) == 0))
-						{
-							pAd->CommonCfg.RadarDetect.RDDurRegion = JAP_W56;
-							pAd->CommonCfg.RadarDetect.DfsSessionTime = 13;
-						}
-						else if ((strncmp(tmpbuf, "JAP", 3) == 0) || (strncmp(tmpbuf, "jap", 3) == 0))
-						{
-							pAd->CommonCfg.RadarDetect.RDDurRegion = JAP;
-							pAd->CommonCfg.RadarDetect.DfsSessionTime = 5;
-						}
-						else  if ((strncmp(tmpbuf, "FCC", 3) == 0) || (strncmp(tmpbuf, "fcc", 3) == 0))
-						{
-							pAd->CommonCfg.RadarDetect.RDDurRegion = FCC;
-							pAd->CommonCfg.RadarDetect.DfsSessionTime = 5;
-						}
-						else if ((strncmp(tmpbuf, "CE", 2) == 0) || (strncmp(tmpbuf, "ce", 2) == 0))
-						{
-							pAd->CommonCfg.RadarDetect.RDDurRegion = CE;
-							pAd->CommonCfg.RadarDetect.DfsSessionTime = 13;
-						}
-						else
-						{
-							pAd->CommonCfg.RadarDetect.RDDurRegion = CE;
-							pAd->CommonCfg.RadarDetect.DfsSessionTime = 13;
-						}
-
-						DBGPRINT(RT_DEBUG_TRACE, ("RDRegion=%d\n", pAd->CommonCfg.RadarDetect.RDDurRegion));
-					}
-					else
-					{
-						pAd->CommonCfg.RadarDetect.RDDurRegion = CE;
-						pAd->CommonCfg.RadarDetect.DfsSessionTime = 13;
-					}
-
-					//WirelessEvent
-					if(RTMPGetKeyParameter("WirelessEvent", tmpbuf, 10, buffer))
-					{
-#if WIRELESS_EXT >= 15
-					    if(simple_strtol(tmpbuf, 0, 10) != 0)
-							pAd->CommonCfg.bWirelessEvent = simple_strtol(tmpbuf, 0, 10);
-						else
-							pAd->CommonCfg.bWirelessEvent = 0;	// disable
-#else
-						pAd->CommonCfg.bWirelessEvent = 0;	// disable
-#endif
-   						DBGPRINT(RT_DEBUG_TRACE, ("WirelessEvent=%d\n", pAd->CommonCfg.bWirelessEvent));
-					}
-					if(RTMPGetKeyParameter("WiFiTest", tmpbuf, 10, buffer))
-					{
-					    if(simple_strtol(tmpbuf, 0, 10) != 0)
-							pAd->CommonCfg.bWiFiTest= simple_strtol(tmpbuf, 0, 10);
-						else
-							pAd->CommonCfg.bWiFiTest = 0;	// disable
-
-   						DBGPRINT(RT_DEBUG_TRACE, ("WiFiTest=%d\n", pAd->CommonCfg.bWiFiTest));
-					}
-					//AuthMode
-					if(RTMPGetKeyParameter("AuthMode", tmpbuf, 128, buffer))
-					{
-#ifdef CONFIG_STA_SUPPORT
-						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-						{
-							if ((strcmp(tmpbuf, "WEPAUTO") == 0) || (strcmp(tmpbuf, "wepauto") == 0))
-							    pAd->StaCfg.AuthMode = Ndis802_11AuthModeAutoSwitch;
-							else if ((strcmp(tmpbuf, "SHARED") == 0) || (strcmp(tmpbuf, "shared") == 0))
-							    pAd->StaCfg.AuthMode = Ndis802_11AuthModeShared;
-							else if ((strcmp(tmpbuf, "WPAPSK") == 0) || (strcmp(tmpbuf, "wpapsk") == 0))
-							    pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPAPSK;
-							else if ((strcmp(tmpbuf, "WPANONE") == 0) || (strcmp(tmpbuf, "wpanone") == 0))
-							    pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPANone;
-							else if ((strcmp(tmpbuf, "WPA2PSK") == 0) || (strcmp(tmpbuf, "wpa2psk") == 0))
-							    pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPA2PSK;
-#ifdef WPA_SUPPLICANT_SUPPORT
-							else if ((strcmp(tmpbuf, "WPA") == 0) || (strcmp(tmpbuf, "wpa") == 0))
-							    pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPA;
-							else if ((strcmp(tmpbuf, "WPA2") == 0) || (strcmp(tmpbuf, "wpa2") == 0))
-							    pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPA2;
-#endif // WPA_SUPPLICANT_SUPPORT //
-				                        else
-				                            pAd->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
-
-				                        pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-
-							DBGPRINT(RT_DEBUG_TRACE, ("%s::(EncrypType=%d)\n", __func__, pAd->StaCfg.WepStatus));
-						}
-#endif // CONFIG_STA_SUPPORT //
-					}
-					//EncrypType
-					if(RTMPGetKeyParameter("EncrypType", tmpbuf, 128, buffer))
-					{
-
-#ifdef CONFIG_STA_SUPPORT
-						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-						{
-							if ((strcmp(tmpbuf, "WEP") == 0) || (strcmp(tmpbuf, "wep") == 0))
-								pAd->StaCfg.WepStatus	= Ndis802_11WEPEnabled;
-							else if ((strcmp(tmpbuf, "TKIP") == 0) || (strcmp(tmpbuf, "tkip") == 0))
-								pAd->StaCfg.WepStatus	= Ndis802_11Encryption2Enabled;
-							else if ((strcmp(tmpbuf, "AES") == 0) || (strcmp(tmpbuf, "aes") == 0))
-								pAd->StaCfg.WepStatus	= Ndis802_11Encryption3Enabled;
-							else
-								pAd->StaCfg.WepStatus	= Ndis802_11WEPDisabled;
-
-							// Update all wepstatus related
-							pAd->StaCfg.PairCipher		= pAd->StaCfg.WepStatus;
-							pAd->StaCfg.GroupCipher 	= pAd->StaCfg.WepStatus;
-							pAd->StaCfg.OrigWepStatus 	= pAd->StaCfg.WepStatus;
-							pAd->StaCfg.bMixCipher 		= FALSE;
-
-							//RTMPMakeRSNIE(pAd, pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus, 0);
-							DBGPRINT(RT_DEBUG_TRACE, ("%s::(EncrypType=%d)\n", __func__, pAd->StaCfg.WepStatus));
-						}
-#endif // CONFIG_STA_SUPPORT //
-					}
-
-
-
-#ifdef CONFIG_STA_SUPPORT
-					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-					{
-						if(RTMPGetCriticalParameter("WPAPSK", tmpbuf, 512, buffer))
-						{
-							int     err=0;
-
-							tmpbuf[strlen(tmpbuf)] = '\0'; // make STA can process .$^& for WPAPSK input
-
-							if ((pAd->StaCfg.AuthMode != Ndis802_11AuthModeWPAPSK) &&
-								(pAd->StaCfg.AuthMode != Ndis802_11AuthModeWPA2PSK) &&
-								(pAd->StaCfg.AuthMode != Ndis802_11AuthModeWPANone)
-								)
-							{
-								err = 1;
-							}
-							else if ((strlen(tmpbuf) >= 8) && (strlen(tmpbuf) < 64))
-							{
-								PasswordHash((char *)tmpbuf, pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen, keyMaterial);
-								NdisMoveMemory(pAd->StaCfg.PMK, keyMaterial, 32);
-
-							}
-							else if (strlen(tmpbuf) == 64)
-							{
-								AtoH(tmpbuf, keyMaterial, 32);
-								NdisMoveMemory(pAd->StaCfg.PMK, keyMaterial, 32);
-							}
-							else
-							{
-								err = 1;
-								DBGPRINT(RT_DEBUG_ERROR, ("%s::(WPAPSK key-string required 8 ~ 64 characters!)\n", __func__));
-							}
-
-							if (err == 0)
-	                        			{
-	                        				if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
-									(pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK))
-								{
-									// Start STA supplicant state machine
-									pAd->StaCfg.WpaState = SS_START;
-								}
-								else if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
-								{
-	/*
-									NdisZeroMemory(&pAd->SharedKey[BSS0][0], sizeof(CIPHER_KEY));
-									pAd->SharedKey[BSS0][0].KeyLen = LEN_TKIP_EK;
-									NdisMoveMemory(pAd->SharedKey[BSS0][0].Key, pAd->StaCfg.PMK, LEN_TKIP_EK);
-									NdisMoveMemory(pAd->SharedKey[BSS0][0].RxMic, &pAd->StaCfg.PMK[16], LEN_TKIP_RXMICK);
-									NdisMoveMemory(pAd->SharedKey[BSS0][0].TxMic, &pAd->StaCfg.PMK[16], LEN_TKIP_TXMICK);
-
-									// Decide its ChiperAlg
-									if (pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled)
-										pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_TKIP;
-									else if (pAd->StaCfg.PairCipher == Ndis802_11Encryption3Enabled)
-										pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_AES;
-									else
-										pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_NONE;
-	*/
-									pAd->StaCfg.WpaState = SS_NOTUSE;
-								}
-
-								DBGPRINT(RT_DEBUG_TRACE, ("%s::(WPAPSK=%s)\n", __func__, tmpbuf));
-							}
-						}
-					}
-#endif // CONFIG_STA_SUPPORT //
-
-					//DefaultKeyID, KeyType, KeyStr
-					rtmp_read_key_parms_from_file(pAd, tmpbuf, buffer);
-
-
-					//HSCounter
-					/*if(RTMPGetKeyParameter("HSCounter", tmpbuf, 10, buffer))
-					{
-						switch (simple_strtol(tmpbuf, 0, 10))
-						{
-							case 1: //Enable
-								pAd->CommonCfg.bEnableHSCounter = TRUE;
-								break;
-							case 0: //Disable
-							default:
-								pAd->CommonCfg.bEnableHSCounter = FALSE;
-								break;
-						}
-						DBGPRINT(RT_DEBUG_TRACE, "HSCounter=%d\n", pAd->CommonCfg.bEnableHSCounter);
-					}*/
-
-#ifdef DOT11_N_SUPPORT
-					HTParametersHook(pAd, tmpbuf, buffer);
-#endif // DOT11_N_SUPPORT //
-
-
-#ifdef CARRIER_DETECTION_SUPPORT
-						//CarrierDetect
-						if(RTMPGetKeyParameter("CarrierDetect", tmpbuf, 128, buffer))
-						{
-							if ((strncmp(tmpbuf, "0", 1) == 0))
-								pAd->CommonCfg.CarrierDetect.Enable = FALSE;
-							else if ((strncmp(tmpbuf, "1", 1) == 0))
-								pAd->CommonCfg.CarrierDetect.Enable = TRUE;
-							else
-								pAd->CommonCfg.CarrierDetect.Enable = FALSE;
-
-							DBGPRINT(RT_DEBUG_TRACE, ("CarrierDetect.Enable=%d\n", pAd->CommonCfg.CarrierDetect.Enable));
-						}
-						else
-							pAd->CommonCfg.CarrierDetect.Enable = FALSE;
-#endif // CARRIER_DETECTION_SUPPORT //
-
-#ifdef CONFIG_STA_SUPPORT
-					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-					{
-						//PSMode
-						if (RTMPGetKeyParameter("PSMode", tmpbuf, 10, buffer))
-						{
-							if (pAd->StaCfg.BssType == BSS_INFRA)
-							{
-								if ((strcmp(tmpbuf, "MAX_PSP") == 0) || (strcmp(tmpbuf, "max_psp") == 0))
-								{
-									// do NOT turn on PSM bit here, wait until MlmeCheckForPsmChange()
-									// to exclude certain situations.
-									//	   MlmeSetPsm(pAd, PWR_SAVE);
-									OPSTATUS_SET_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM);
-									if (pAd->StaCfg.bWindowsACCAMEnable == FALSE)
-										pAd->StaCfg.WindowsPowerMode = Ndis802_11PowerModeMAX_PSP;
-									pAd->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeMAX_PSP;
-									pAd->StaCfg.DefaultListenCount = 5;
-								}
-								else if ((strcmp(tmpbuf, "Fast_PSP") == 0) || (strcmp(tmpbuf, "fast_psp") == 0)
-									|| (strcmp(tmpbuf, "FAST_PSP") == 0))
-								{
-									// do NOT turn on PSM bit here, wait until MlmeCheckForPsmChange()
-									// to exclude certain situations.
-									//	   MlmeSetPsmBit(pAd, PWR_SAVE);
-									OPSTATUS_SET_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM);
-									if (pAd->StaCfg.bWindowsACCAMEnable == FALSE)
-										pAd->StaCfg.WindowsPowerMode = Ndis802_11PowerModeFast_PSP;
-									pAd->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeFast_PSP;
-									pAd->StaCfg.DefaultListenCount = 3;
-								}
-								else if ((strcmp(tmpbuf, "Legacy_PSP") == 0) || (strcmp(tmpbuf, "legacy_psp") == 0)
-									|| (strcmp(tmpbuf, "LEGACY_PSP") == 0))
-								{
-									// do NOT turn on PSM bit here, wait until MlmeCheckForPsmChange()
-									// to exclude certain situations.
-									//	   MlmeSetPsmBit(pAd, PWR_SAVE);
-									OPSTATUS_SET_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM);
-									if (pAd->StaCfg.bWindowsACCAMEnable == FALSE)
-										pAd->StaCfg.WindowsPowerMode = Ndis802_11PowerModeLegacy_PSP;
-									pAd->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeLegacy_PSP;
-									pAd->StaCfg.DefaultListenCount = 3;
-								}
-								else
-								{ //Default Ndis802_11PowerModeCAM
-									// clear PSM bit immediately
-									MlmeSetPsmBit(pAd, PWR_ACTIVE);
-									OPSTATUS_SET_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM);
-									if (pAd->StaCfg.bWindowsACCAMEnable == FALSE)
-										pAd->StaCfg.WindowsPowerMode = Ndis802_11PowerModeCAM;
-									pAd->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeCAM;
-								}
-								DBGPRINT(RT_DEBUG_TRACE, ("PSMode=%ld\n", pAd->StaCfg.WindowsPowerMode));
-							}
-						}
-						// FastRoaming
-						if (RTMPGetKeyParameter("FastRoaming", tmpbuf, 32, buffer))
-						{
-							if (simple_strtol(tmpbuf, 0, 10) == 0)
-								pAd->StaCfg.bFastRoaming = FALSE;
-							else
-								pAd->StaCfg.bFastRoaming = TRUE;
-
-							DBGPRINT(RT_DEBUG_TRACE, ("FastRoaming=%d\n", pAd->StaCfg.bFastRoaming));
-						}
-						// RoamThreshold
-						if (RTMPGetKeyParameter("RoamThreshold", tmpbuf, 32, buffer))
-						{
-							long lInfo = simple_strtol(tmpbuf, 0, 10);
-
-							if (lInfo > 90 || lInfo < 60)
-								pAd->StaCfg.dBmToRoam = -70;
-							else
-								pAd->StaCfg.dBmToRoam = (CHAR)(-1)*lInfo;
-
-							DBGPRINT(RT_DEBUG_TRACE, ("RoamThreshold=%d  dBm\n", pAd->StaCfg.dBmToRoam));
-						}
-
-						if(RTMPGetKeyParameter("TGnWifiTest", tmpbuf, 10, buffer))
-						{
-							if(simple_strtol(tmpbuf, 0, 10) == 0)
-								pAd->StaCfg.bTGnWifiTest = FALSE;
-							else
-								pAd->StaCfg.bTGnWifiTest = TRUE;
-								DBGPRINT(RT_DEBUG_TRACE, ("TGnWifiTest=%d\n", pAd->StaCfg.bTGnWifiTest));
-						}
-					}
-#endif // CONFIG_STA_SUPPORT //
-
-
-
-				}
-			}
-			else
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("--> %s does not have a write method\n", src));
-			}
-
-			retval=filp_close(srcf,NULL);
-
-			if (retval)
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("--> Error %d closing %s\n", -retval, src));
-			}
-		}
-	}
-
-	set_fs(orgfs);
-#if 0
-	current->fsuid = orgfsuid;
-	current->fsgid = orgfsgid;
-#endif
-
-	kfree(buffer);
-	kfree(tmpbuf);
-
-	return (NDIS_STATUS_SUCCESS);
-}
-
-#ifdef DOT11_N_SUPPORT
-static void	HTParametersHook(
-	IN	PRTMP_ADAPTER pAd,
-	IN	CHAR		  *pValueStr,
-	IN	CHAR		  *pInput)
-{
-
-	INT Value;
-
-    if (RTMPGetKeyParameter("HT_PROTECT", pValueStr, 25, pInput))
-    {
-        Value = simple_strtol(pValueStr, 0, 10);
-        if (Value == 0)
-        {
-            pAd->CommonCfg.bHTProtect = FALSE;
-        }
-        else
-        {
-            pAd->CommonCfg.bHTProtect = TRUE;
-        }
-        DBGPRINT(RT_DEBUG_TRACE, ("HT: Protection  = %s\n", (Value==0) ? "Disable" : "Enable"));
-    }
-
-    if (RTMPGetKeyParameter("HT_MIMOPSEnable", pValueStr, 25, pInput))
-    {
-        Value = simple_strtol(pValueStr, 0, 10);
-        if (Value == 0)
-        {
-            pAd->CommonCfg.bMIMOPSEnable = FALSE;
-        }
-        else
-        {
-            pAd->CommonCfg.bMIMOPSEnable = TRUE;
-        }
-        DBGPRINT(RT_DEBUG_TRACE, ("HT: MIMOPSEnable  = %s\n", (Value==0) ? "Disable" : "Enable"));
-    }
-
-
-    if (RTMPGetKeyParameter("HT_MIMOPSMode", pValueStr, 25, pInput))
-    {
-        Value = simple_strtol(pValueStr, 0, 10);
-        if (Value > MMPS_ENABLE)
-        {
-			pAd->CommonCfg.BACapability.field.MMPSmode = MMPS_ENABLE;
-        }
-        else
-        {
-            //TODO: add mimo power saving mechanism
-            pAd->CommonCfg.BACapability.field.MMPSmode = MMPS_ENABLE;
-			//pAd->CommonCfg.BACapability.field.MMPSmode = Value;
-        }
-        DBGPRINT(RT_DEBUG_TRACE, ("HT: MIMOPS Mode  = %d\n", Value));
-    }
-
-    if (RTMPGetKeyParameter("HT_BADecline", pValueStr, 25, pInput))
-    {
-        Value = simple_strtol(pValueStr, 0, 10);
-        if (Value == 0)
-        {
-            pAd->CommonCfg.bBADecline = FALSE;
-        }
-        else
-        {
-            pAd->CommonCfg.bBADecline = TRUE;
-        }
-        DBGPRINT(RT_DEBUG_TRACE, ("HT: BA Decline  = %s\n", (Value==0) ? "Disable" : "Enable"));
-    }
-
-
-    if (RTMPGetKeyParameter("HT_DisableReordering", pValueStr, 25, pInput))
-    {
-        Value = simple_strtol(pValueStr, 0, 10);
-        if (Value == 0)
-        {
-            pAd->CommonCfg.bDisableReordering = FALSE;
-        }
-        else
-        {
-            pAd->CommonCfg.bDisableReordering = TRUE;
-        }
-        DBGPRINT(RT_DEBUG_TRACE, ("HT: DisableReordering  = %s\n", (Value==0) ? "Disable" : "Enable"));
-    }
-
-    if (RTMPGetKeyParameter("HT_AutoBA", pValueStr, 25, pInput))
-    {
-        Value = simple_strtol(pValueStr, 0, 10);
-        if (Value == 0)
-        {
-            pAd->CommonCfg.BACapability.field.AutoBA = FALSE;
-        }
-        else
-        {
-            pAd->CommonCfg.BACapability.field.AutoBA = TRUE;
-        }
-        pAd->CommonCfg.REGBACapability.field.AutoBA = pAd->CommonCfg.BACapability.field.AutoBA;
-        DBGPRINT(RT_DEBUG_TRACE, ("HT: Auto BA  = %s\n", (Value==0) ? "Disable" : "Enable"));
-    }
-
-	// Tx_+HTC frame
-    if (RTMPGetKeyParameter("HT_HTC", pValueStr, 25, pInput))
-	{
-		Value = simple_strtol(pValueStr, 0, 10);
-		if (Value == 0)
-		{
-			pAd->HTCEnable = FALSE;
-		}
-		else
-		{
-            		pAd->HTCEnable = TRUE;
-		}
-		DBGPRINT(RT_DEBUG_TRACE, ("HT: Tx +HTC frame = %s\n", (Value==0) ? "Disable" : "Enable"));
-	}
-
-	// Enable HT Link Adaptation Control
-	if (RTMPGetKeyParameter("HT_LinkAdapt", pValueStr, 25, pInput))
-	{
-		Value = simple_strtol(pValueStr, 0, 10);
-		if (Value == 0)
-		{
-			pAd->bLinkAdapt = FALSE;
-		}
-		else
-		{
-			pAd->HTCEnable = TRUE;
-			pAd->bLinkAdapt = TRUE;
-		}
-		DBGPRINT(RT_DEBUG_TRACE, ("HT: Link Adaptation Control = %s\n", (Value==0) ? "Disable" : "Enable(+HTC)"));
-	}
-
-	// Reverse Direction Mechanism
-    if (RTMPGetKeyParameter("HT_RDG", pValueStr, 25, pInput))
-	{
-		Value = simple_strtol(pValueStr, 0, 10);
-		if (Value == 0)
-		{
-			pAd->CommonCfg.bRdg = FALSE;
-		}
-		else
-		{
-			pAd->HTCEnable = TRUE;
-            pAd->CommonCfg.bRdg = TRUE;
-		}
-		DBGPRINT(RT_DEBUG_TRACE, ("HT: RDG = %s\n", (Value==0) ? "Disable" : "Enable(+HTC)"));
-	}
-
-
-
-
-	// Tx A-MSUD ?
-    if (RTMPGetKeyParameter("HT_AMSDU", pValueStr, 25, pInput))
-	{
-		Value = simple_strtol(pValueStr, 0, 10);
-		if (Value == 0)
-		{
-			pAd->CommonCfg.BACapability.field.AmsduEnable = FALSE;
-		}
-		else
-		{
-            pAd->CommonCfg.BACapability.field.AmsduEnable = TRUE;
-		}
-		DBGPRINT(RT_DEBUG_TRACE, ("HT: Tx A-MSDU = %s\n", (Value==0) ? "Disable" : "Enable"));
-	}
-
-	// MPDU Density
-    if (RTMPGetKeyParameter("HT_MpduDensity", pValueStr, 25, pInput))
-	{
-		Value = simple_strtol(pValueStr, 0, 10);
-		if (Value <=7 && Value >= 0)
-		{
-			pAd->CommonCfg.BACapability.field.MpduDensity = Value;
-			DBGPRINT(RT_DEBUG_TRACE, ("HT: MPDU Density = %d\n", Value));
-		}
-		else
-		{
-			pAd->CommonCfg.BACapability.field.MpduDensity = 4;
-			DBGPRINT(RT_DEBUG_TRACE, ("HT: MPDU Density = %d (Default)\n", 4));
-		}
-	}
-
-	// Max Rx BA Window Size
-    if (RTMPGetKeyParameter("HT_BAWinSize", pValueStr, 25, pInput))
-	{
-		Value = simple_strtol(pValueStr, 0, 10);
-
-		if (Value >=1 && Value <= 64)
-		{
-			pAd->CommonCfg.REGBACapability.field.RxBAWinLimit = Value;
-			pAd->CommonCfg.BACapability.field.RxBAWinLimit = Value;
-			DBGPRINT(RT_DEBUG_TRACE, ("HT: BA Windw Size = %d\n", Value));
-		}
-		else
-		{
-            pAd->CommonCfg.REGBACapability.field.RxBAWinLimit = 64;
-			pAd->CommonCfg.BACapability.field.RxBAWinLimit = 64;
-			DBGPRINT(RT_DEBUG_TRACE, ("HT: BA Windw Size = 64 (Defualt)\n"));
-		}
-
-	}
-
-	// Guard Interval
-	if (RTMPGetKeyParameter("HT_GI", pValueStr, 25, pInput))
-	{
-		Value = simple_strtol(pValueStr, 0, 10);
-
-		if (Value == GI_400)
-		{
-			pAd->CommonCfg.RegTransmitSetting.field.ShortGI = GI_400;
-		}
-		else
-		{
-			pAd->CommonCfg.RegTransmitSetting.field.ShortGI = GI_800;
-		}
-
-		DBGPRINT(RT_DEBUG_TRACE, ("HT: Guard Interval = %s\n", (Value==GI_400) ? "400" : "800" ));
-	}
-
-	// HT Operation Mode : Mixed Mode , Green Field
-	if (RTMPGetKeyParameter("HT_OpMode", pValueStr, 25, pInput))
-	{
-		Value = simple_strtol(pValueStr, 0, 10);
-
-		if (Value == HTMODE_GF)
-		{
-
-			pAd->CommonCfg.RegTransmitSetting.field.HTMODE  = HTMODE_GF;
-		}
-		else
-		{
-			pAd->CommonCfg.RegTransmitSetting.field.HTMODE  = HTMODE_MM;
-		}
-
-		DBGPRINT(RT_DEBUG_TRACE, ("HT: Operate Mode = %s\n", (Value==HTMODE_GF) ? "Green Field" : "Mixed Mode" ));
-	}
-
-	// Fixed Tx mode : CCK, OFDM
-	if (RTMPGetKeyParameter("FixedTxMode", pValueStr, 25, pInput))
-	{
-		UCHAR	fix_tx_mode;
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			fix_tx_mode = FIXED_TXMODE_HT;
-
-			if (strcmp(pValueStr, "OFDM") == 0 || strcmp(pValueStr, "ofdm") == 0)
-			{
-				fix_tx_mode = FIXED_TXMODE_OFDM;
-			}
-			else if (strcmp(pValueStr, "CCK") == 0 || strcmp(pValueStr, "cck") == 0)
-			{
-		        fix_tx_mode = FIXED_TXMODE_CCK;
-			}
-			else if (strcmp(pValueStr, "HT") == 0 || strcmp(pValueStr, "ht") == 0)
-			{
-		        fix_tx_mode = FIXED_TXMODE_HT;
-		}
-		else
-		{
-				Value = simple_strtol(pValueStr, 0, 10);
-				// 1 : CCK
-				// 2 : OFDM
-				// otherwise : HT
-				if (Value == FIXED_TXMODE_CCK || Value == FIXED_TXMODE_OFDM)
-					fix_tx_mode = Value;
-				else
-					fix_tx_mode = FIXED_TXMODE_HT;
-		}
-
-			pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode = fix_tx_mode;
-			DBGPRINT(RT_DEBUG_TRACE, ("Fixed Tx Mode = %d\n", fix_tx_mode));
-
-		}
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-
-	// Channel Width
-	if (RTMPGetKeyParameter("HT_BW", pValueStr, 25, pInput))
-	{
-		Value = simple_strtol(pValueStr, 0, 10);
-
-		if (Value == BW_40)
-		{
-			pAd->CommonCfg.RegTransmitSetting.field.BW  = BW_40;
-		}
-		else
-		{
-            pAd->CommonCfg.RegTransmitSetting.field.BW  = BW_20;
-		}
-
-#ifdef MCAST_RATE_SPECIFIC
-		pAd->CommonCfg.MCastPhyMode.field.BW = pAd->CommonCfg.RegTransmitSetting.field.BW;
-#endif // MCAST_RATE_SPECIFIC //
-
-		DBGPRINT(RT_DEBUG_TRACE, ("HT: Channel Width = %s\n", (Value==BW_40) ? "40 MHz" : "20 MHz" ));
-	}
-
-	if (RTMPGetKeyParameter("HT_EXTCHA", pValueStr, 25, pInput))
-	{
-		Value = simple_strtol(pValueStr, 0, 10);
-
-		if (Value == 0)
-		{
-
-			pAd->CommonCfg.RegTransmitSetting.field.EXTCHA  = EXTCHA_BELOW;
-		}
-		else
-		{
-            pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_ABOVE;
-		}
-
-		DBGPRINT(RT_DEBUG_TRACE, ("HT: Ext Channel = %s\n", (Value==0) ? "BELOW" : "ABOVE" ));
-	}
-
-	// MSC
-	if (RTMPGetKeyParameter("HT_MCS", pValueStr, 50, pInput))
-	{
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			Value = simple_strtol(pValueStr, 0, 10);
-
-//			if ((Value >= 0 && Value <= 15) || (Value == 32))
-			if ((Value >= 0 && Value <= 23) || (Value == 32)) // 3*3
-		{
-				pAd->StaCfg.DesiredTransmitSetting.field.MCS  = Value;
-				pAd->StaCfg.bAutoTxRateSwitch = FALSE;
-				DBGPRINT(RT_DEBUG_TRACE, ("HT: MCS = %d\n", pAd->StaCfg.DesiredTransmitSetting.field.MCS));
-		}
-		else
-		{
-				pAd->StaCfg.DesiredTransmitSetting.field.MCS  = MCS_AUTO;
-				pAd->StaCfg.bAutoTxRateSwitch = TRUE;
-				DBGPRINT(RT_DEBUG_TRACE, ("HT: MCS = AUTO\n"));
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-	// STBC
-    if (RTMPGetKeyParameter("HT_STBC", pValueStr, 25, pInput))
-	{
-		Value = simple_strtol(pValueStr, 0, 10);
-		if (Value == STBC_USE)
-		{
-			pAd->CommonCfg.RegTransmitSetting.field.STBC = STBC_USE;
-		}
-		else
-		{
-			pAd->CommonCfg.RegTransmitSetting.field.STBC = STBC_NONE;
-		}
-		DBGPRINT(RT_DEBUG_TRACE, ("HT: STBC = %d\n", pAd->CommonCfg.RegTransmitSetting.field.STBC));
-	}
-
-	// 40_Mhz_Intolerant
-	if (RTMPGetKeyParameter("HT_40MHZ_INTOLERANT", pValueStr, 25, pInput))
-	{
-		Value = simple_strtol(pValueStr, 0, 10);
-		if (Value == 0)
-		{
-			pAd->CommonCfg.bForty_Mhz_Intolerant = FALSE;
-		}
-		else
-		{
-			pAd->CommonCfg.bForty_Mhz_Intolerant = TRUE;
-		}
-		DBGPRINT(RT_DEBUG_TRACE, ("HT: 40MHZ INTOLERANT = %d\n", pAd->CommonCfg.bForty_Mhz_Intolerant));
-	}
-	//HT_TxStream
-	if(RTMPGetKeyParameter("HT_TxStream", pValueStr, 10, pInput))
-	{
-		switch (simple_strtol(pValueStr, 0, 10))
-		{
-			case 1:
-				pAd->CommonCfg.TxStream = 1;
-				break;
-			case 2:
-				pAd->CommonCfg.TxStream = 2;
-				break;
-			case 3: // 3*3
-			default:
-				pAd->CommonCfg.TxStream = 3;
-
-				if (pAd->MACVersion < RALINK_2883_VERSION)
-					pAd->CommonCfg.TxStream = 2; // only 2 tx streams for RT2860 series
-				break;
-		}
-		DBGPRINT(RT_DEBUG_TRACE, ("HT: Tx Stream = %d\n", pAd->CommonCfg.TxStream));
-	}
-	//HT_RxStream
-	if(RTMPGetKeyParameter("HT_RxStream", pValueStr, 10, pInput))
-	{
-		switch (simple_strtol(pValueStr, 0, 10))
-		{
-			case 1:
-				pAd->CommonCfg.RxStream = 1;
-				break;
-			case 2:
-				pAd->CommonCfg.RxStream = 2;
-				break;
-			case 3:
-			default:
-				pAd->CommonCfg.RxStream = 3;
-
-				if (pAd->MACVersion < RALINK_2883_VERSION)
-					pAd->CommonCfg.RxStream = 2; // only 2 rx streams for RT2860 series
-				break;
-		}
-		DBGPRINT(RT_DEBUG_TRACE, ("HT: Rx Stream = %d\n", pAd->CommonCfg.RxStream));
-	}
-
-}
-#endif // DOT11_N_SUPPORT //
-
+#include "../rt2860/rt_profile.c"
diff --git a/drivers/staging/rt2870/rtmp.h b/drivers/staging/rt2870/rtmp.h
index c2a4784ec33..e5ef89f8bef 100644
--- a/drivers/staging/rt2870/rtmp.h
+++ b/drivers/staging/rt2870/rtmp.h
@@ -1,7586 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-    rtmp.h
-
-    Abstract:
-    Miniport generic portion header file
-
-    Revision History:
-    Who         When          What
-    --------    ----------    ----------------------------------------------
-    Paul Lin    2002-08-01    created
-    James Tan   2002-09-06    modified (Revise NTCRegTable)
-    John Chang  2004-09-06    modified for RT2600
-*/
-#ifndef __RTMP_H__
-#define __RTMP_H__
-
-#include "link_list.h"
-#include "spectrum_def.h"
-
-
-#ifdef CONFIG_STA_SUPPORT
-#include "aironet.h"
-#endif // CONFIG_STA_SUPPORT //
-
-//#define DBG		1
-
-//#define DBG_DIAGNOSE		1
-
-#if defined(CONFIG_AP_SUPPORT) && defined(CONFIG_STA_SUPPORT)
-#define IF_DEV_CONFIG_OPMODE_ON_AP(_pAd)	if(_pAd->OpMode == OPMODE_AP)
-#define IF_DEV_CONFIG_OPMODE_ON_STA(_pAd)	if(_pAd->OpMode == OPMODE_STA)
-#else
-#define IF_DEV_CONFIG_OPMODE_ON_AP(_pAd)
-#define IF_DEV_CONFIG_OPMODE_ON_STA(_pAd)
-#endif
-
-#define VIRTUAL_IF_INC(__pAd) ((__pAd)->VirtualIfCnt++)
-#define VIRTUAL_IF_DEC(__pAd) ((__pAd)->VirtualIfCnt--)
-#define VIRTUAL_IF_NUM(__pAd) ((__pAd)->VirtualIfCnt)
-
-#ifdef RT2870
-////////////////////////////////////////////////////////////////////////////
-// The TX_BUFFER structure forms the transmitted USB packet to the device
-////////////////////////////////////////////////////////////////////////////
-typedef struct __TX_BUFFER{
-	union	{
-		UCHAR			WirelessPacket[TX_BUFFER_NORMSIZE];
-		HEADER_802_11	NullFrame;
-		PSPOLL_FRAME	PsPollPacket;
-		RTS_FRAME		RTSFrame;
-	}field;
-	UCHAR			Aggregation[4];  //Buffer for save Aggregation size.
-} TX_BUFFER, *PTX_BUFFER;
-
-typedef struct __HTTX_BUFFER{
-	union	{
-		UCHAR			WirelessPacket[MAX_TXBULK_SIZE];
-		HEADER_802_11	NullFrame;
-		PSPOLL_FRAME	PsPollPacket;
-		RTS_FRAME		RTSFrame;
-	}field;
-	UCHAR			Aggregation[4];  //Buffer for save Aggregation size.
-} HTTX_BUFFER, *PHTTX_BUFFER;
-
-
-// used to track driver-generated write irps
-typedef struct _TX_CONTEXT
-{
-	PVOID			pAd;		//Initialized in MiniportInitialize
-	PURB			pUrb;			//Initialized in MiniportInitialize
-	PIRP			pIrp;			//used to cancel pending bulk out.
-									//Initialized in MiniportInitialize
-	PTX_BUFFER		TransferBuffer;	//Initialized in MiniportInitialize
-	ULONG			BulkOutSize;
-	UCHAR			BulkOutPipeId;
-	UCHAR			SelfIdx;
-	BOOLEAN			InUse;
-	BOOLEAN			bWaitingBulkOut; // at least one packet is in this TxContext, ready for making IRP anytime.
-	BOOLEAN			bFullForBulkOut; // all tx buffer are full , so waiting for tx bulkout.
-	BOOLEAN			IRPPending;
-	BOOLEAN			LastOne;
-	BOOLEAN			bAggregatible;
-	UCHAR			Header_802_3[LENGTH_802_3];
-	UCHAR			Rsv[2];
-	ULONG			DataOffset;
-	UINT			TxRate;
-	dma_addr_t		data_dma;		// urb dma on linux
-
-}	TX_CONTEXT, *PTX_CONTEXT, **PPTX_CONTEXT;
-
-
-// used to track driver-generated write irps
-typedef struct _HT_TX_CONTEXT
-{
-	PVOID			pAd;		//Initialized in MiniportInitialize
-	PURB			pUrb;			//Initialized in MiniportInitialize
-	PIRP			pIrp;			//used to cancel pending bulk out.
-									//Initialized in MiniportInitialize
-	PHTTX_BUFFER	TransferBuffer;	//Initialized in MiniportInitialize
-	ULONG			BulkOutSize;	// Indicate the total bulk-out size in bytes in one bulk-transmission
-	UCHAR			BulkOutPipeId;
-	BOOLEAN			IRPPending;
-	BOOLEAN			LastOne;
-	BOOLEAN			bCurWriting;
-	BOOLEAN			bRingEmpty;
-	BOOLEAN			bCopySavePad;
-	UCHAR			SavedPad[8];
-	UCHAR			Header_802_3[LENGTH_802_3];
-	ULONG			CurWritePosition;		// Indicate the buffer offset which packet will be inserted start from.
-	ULONG			CurWriteRealPos;		// Indicate the buffer offset which packet now are writing to.
-	ULONG			NextBulkOutPosition;	// Indicate the buffer start offset of a bulk-transmission
-	ULONG			ENextBulkOutPosition;	// Indicate the buffer end offset of a bulk-transmission
-	UINT			TxRate;
-	dma_addr_t		data_dma;		// urb dma on linux
-}	HT_TX_CONTEXT, *PHT_TX_CONTEXT, **PPHT_TX_CONTEXT;
-
-
-//
-// Structure to keep track of receive packets and buffers to indicate
-// receive data to the protocol.
-//
-typedef struct _RX_CONTEXT
-{
-	PUCHAR				TransferBuffer;
-	PVOID				pAd;
-	PIRP				pIrp;//used to cancel pending bulk in.
-	PURB				pUrb;
-	//These 2 Boolean shouldn't both be 1 at the same time.
-	ULONG				BulkInOffset;	// number of packets waiting for reordering .
-//	BOOLEAN				ReorderInUse;	// At least one packet in this buffer are in reordering buffer and wait for receive indication
-	BOOLEAN				bRxHandling;	// Notify this packet is being process now.
-	BOOLEAN				InUse;			// USB Hardware Occupied. Wait for USB HW to put packet.
-	BOOLEAN				Readable;		// Receive Complete back. OK for driver to indicate receiving packet.
-	BOOLEAN				IRPPending;		// TODO: To be removed
-	atomic_t			IrpLock;
-	NDIS_SPIN_LOCK		RxContextLock;
-	dma_addr_t			data_dma;		// urb dma on linux
-}	RX_CONTEXT, *PRX_CONTEXT;
-#endif // RT2870 //
-
-
-//
-//  NDIS Version definitions
-//
-#ifdef  NDIS50_MINIPORT
-#define RTMP_NDIS_MAJOR_VERSION     5
-#define RTMP_NDIS_MINOR_VERSION     0
-#endif
-
-#ifdef  NDIS51_MINIPORT
-#define RTMP_NDIS_MAJOR_VERSION     5
-#define RTMP_NDIS_MINOR_VERSION     1
-#endif
-
-extern  char    NIC_VENDOR_DESC[];
-extern  int     NIC_VENDOR_DESC_LEN;
-
-extern  unsigned char   SNAP_AIRONET[];
-extern  unsigned char   CipherSuiteCiscoCCKM[];
-extern  unsigned char   CipherSuiteCiscoCCKMLen;
-extern	unsigned char	CipherSuiteCiscoCCKM24[];
-extern	unsigned char	CipherSuiteCiscoCCKM24Len;
-extern  unsigned char   CipherSuiteCCXTkip[];
-extern  unsigned char   CipherSuiteCCXTkipLen;
-extern  unsigned char   CISCO_OUI[];
-extern  UCHAR	BaSizeArray[4];
-
-extern UCHAR BROADCAST_ADDR[MAC_ADDR_LEN];
-extern UCHAR MULTICAST_ADDR[MAC_ADDR_LEN];
-extern UCHAR ZERO_MAC_ADDR[MAC_ADDR_LEN];
-extern ULONG BIT32[32];
-extern UCHAR BIT8[8];
-extern char* CipherName[];
-extern char* MCSToMbps[];
-extern UCHAR	 RxwiMCSToOfdmRate[12];
-extern UCHAR SNAP_802_1H[6];
-extern UCHAR SNAP_BRIDGE_TUNNEL[6];
-extern UCHAR SNAP_AIRONET[8];
-extern UCHAR CKIP_LLC_SNAP[8];
-extern UCHAR EAPOL_LLC_SNAP[8];
-extern UCHAR EAPOL[2];
-extern UCHAR IPX[2];
-extern UCHAR APPLE_TALK[2];
-extern UCHAR RateIdToPlcpSignal[12]; // see IEEE802.11a-1999 p.14
-extern UCHAR	 OfdmRateToRxwiMCS[];
-extern UCHAR OfdmSignalToRateId[16] ;
-extern UCHAR default_cwmin[4];
-extern UCHAR default_cwmax[4];
-extern UCHAR default_sta_aifsn[4];
-extern UCHAR MapUserPriorityToAccessCategory[8];
-
-extern USHORT RateUpPER[];
-extern USHORT RateDownPER[];
-extern UCHAR  Phy11BNextRateDownward[];
-extern UCHAR  Phy11BNextRateUpward[];
-extern UCHAR  Phy11BGNextRateDownward[];
-extern UCHAR  Phy11BGNextRateUpward[];
-extern UCHAR  Phy11ANextRateDownward[];
-extern UCHAR  Phy11ANextRateUpward[];
-extern CHAR   RssiSafeLevelForTxRate[];
-extern UCHAR  RateIdToMbps[];
-extern USHORT RateIdTo500Kbps[];
-
-extern UCHAR  CipherSuiteWpaNoneTkip[];
-extern UCHAR  CipherSuiteWpaNoneTkipLen;
-
-extern UCHAR  CipherSuiteWpaNoneAes[];
-extern UCHAR  CipherSuiteWpaNoneAesLen;
-
-extern UCHAR  SsidIe;
-extern UCHAR  SupRateIe;
-extern UCHAR  ExtRateIe;
-
-#ifdef DOT11_N_SUPPORT
-extern UCHAR  HtCapIe;
-extern UCHAR  AddHtInfoIe;
-extern UCHAR  NewExtChanIe;
-#ifdef DOT11N_DRAFT3
-extern UCHAR  ExtHtCapIe;
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
-
-extern UCHAR  ErpIe;
-extern UCHAR  DsIe;
-extern UCHAR  TimIe;
-extern UCHAR  WpaIe;
-extern UCHAR  Wpa2Ie;
-extern UCHAR  IbssIe;
-extern UCHAR  Ccx2Ie;
-
-extern UCHAR  WPA_OUI[];
-extern UCHAR  RSN_OUI[];
-extern UCHAR  WME_INFO_ELEM[];
-extern UCHAR  WME_PARM_ELEM[];
-extern UCHAR  Ccx2QosInfo[];
-extern UCHAR  Ccx2IeInfo[];
-extern UCHAR  RALINK_OUI[];
-extern UCHAR  PowerConstraintIE[];
-
-
-extern UCHAR  RateSwitchTable[];
-extern UCHAR  RateSwitchTable11B[];
-extern UCHAR  RateSwitchTable11G[];
-extern UCHAR  RateSwitchTable11BG[];
-
-#ifdef DOT11_N_SUPPORT
-extern UCHAR  RateSwitchTable11BGN1S[];
-extern UCHAR  RateSwitchTable11BGN2S[];
-extern UCHAR  RateSwitchTable11BGN2SForABand[];
-extern UCHAR  RateSwitchTable11N1S[];
-extern UCHAR  RateSwitchTable11N2S[];
-extern UCHAR  RateSwitchTable11N2SForABand[];
-
-#ifdef CONFIG_STA_SUPPORT
-extern UCHAR  PRE_N_HT_OUI[];
-#endif // CONFIG_STA_SUPPORT //
-#endif // DOT11_N_SUPPORT //
-
-#define	MAXSEQ		(0xFFF)
-
-#ifdef RALINK_ATE
-typedef	struct _ATE_INFO {
-	UCHAR	Mode;
-	CHAR	TxPower0;
-	CHAR	TxPower1;
-	CHAR    TxAntennaSel;
-	CHAR    RxAntennaSel;
-	TXWI_STRUC  TxWI; 	  // TXWI
-	USHORT	QID;
-	UCHAR	Addr1[MAC_ADDR_LEN];
-	UCHAR	Addr2[MAC_ADDR_LEN];
-	UCHAR	Addr3[MAC_ADDR_LEN];
-	UCHAR	Channel;
-	UINT32	TxLength;
-	UINT32	TxCount;
-	UINT32	TxDoneCount; // Tx DMA Done
-	UINT32	RFFreqOffset;
-	BOOLEAN	bRxFer;
-	BOOLEAN	bQATxStart; // Have compiled QA in and use it to ATE tx.
-	BOOLEAN	bQARxStart;	// Have compiled QA in and use it to ATE rx.
-	UINT32	RxTotalCnt;
-	UINT32	RxCntPerSec;
-
-	CHAR	LastSNR0;             // last received SNR
-	CHAR    LastSNR1;             // last received SNR for 2nd  antenna
-	CHAR    LastRssi0;            // last received RSSI
-	CHAR    LastRssi1;            // last received RSSI for 2nd  antenna
-	CHAR    LastRssi2;            // last received RSSI for 3rd  antenna
-	CHAR    AvgRssi0;             // last 8 frames' average RSSI
-	CHAR    AvgRssi1;             // last 8 frames' average RSSI
-	CHAR    AvgRssi2;             // last 8 frames' average RSSI
-	SHORT   AvgRssi0X8;           // sum of last 8 frames' RSSI
-	SHORT   AvgRssi1X8;           // sum of last 8 frames' RSSI
-	SHORT   AvgRssi2X8;           // sum of last 8 frames' RSSI
-
-	UINT32	NumOfAvgRssiSample;
-
-#ifdef RALINK_28xx_QA
-	// Tx frame
-#ifdef RT2870
-	/* not used in RT2860 */
-	TXINFO_STRUC		TxInfo; // TxInfo
-#endif // RT2870 //
-	USHORT		HLen; // Header Length
-	USHORT		PLen; // Pattern Length
-	UCHAR 		Header[32]; // Header buffer
-	UCHAR		Pattern[32]; // Pattern buffer
-	USHORT		DLen; // Data Length
-	USHORT		seq;
-	UINT32		CID;
-	THREAD_PID 		AtePid;
-	// counters
-	UINT32		U2M;
-	UINT32		OtherData;
-	UINT32		Beacon;
-	UINT32		OtherCount;
-	UINT32		TxAc0;
-	UINT32		TxAc1;
-	UINT32		TxAc2;
-	UINT32		TxAc3;
-	UINT32		TxHCCA;
-	UINT32		TxMgmt;
-	UINT32		RSSI0;
-	UINT32		RSSI1;
-	UINT32		RSSI2;
-	UINT32		SNR0;
-	UINT32		SNR1;
-	// control
-	//UINT32		Repeat; // Tx Cpu count
-	UCHAR		TxStatus; // task Tx status // 0 --> task is idle, 1 --> task is running
-#endif // RALINK_28xx_QA //
-}	ATE_INFO, *PATE_INFO;
-
-#ifdef RALINK_28xx_QA
-struct ate_racfghdr {
- 	UINT32		magic_no;
-	USHORT		command_type;
-	USHORT		command_id;
-	USHORT		length;
-	USHORT		sequence;
-	USHORT		status;
-	UCHAR		data[2046];
-}  __attribute__((packed));
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
-#ifdef DOT11_N_SUPPORT
-struct reordering_mpdu
-{
-	struct reordering_mpdu	*next;
-	PNDIS_PACKET			pPacket;		/* coverted to 802.3 frame */
-	int						Sequence;		/* sequence number of MPDU */
-	BOOLEAN					bAMSDU;
-};
-
-struct reordering_list
-{
-	struct reordering_mpdu *next;
-	int 	qlen;
-};
-
-struct reordering_mpdu_pool
-{
-	PVOID					mem;
-	NDIS_SPIN_LOCK			lock;
-	struct reordering_list 	freelist;
-};
-#endif // DOT11_N_SUPPORT //
-
-typedef struct 	_RSSI_SAMPLE {
-	CHAR			LastRssi0;             // last received RSSI
-	CHAR			LastRssi1;             // last received RSSI
-	CHAR			LastRssi2;             // last received RSSI
-	CHAR			AvgRssi0;
-	CHAR			AvgRssi1;
-	CHAR			AvgRssi2;
-	SHORT			AvgRssi0X8;
-	SHORT			AvgRssi1X8;
-	SHORT			AvgRssi2X8;
-} RSSI_SAMPLE;
-
-//
-//  Queue structure and macros
-//
-typedef struct  _QUEUE_ENTRY    {
-	struct _QUEUE_ENTRY     *Next;
-}   QUEUE_ENTRY, *PQUEUE_ENTRY;
-
-// Queue structure
-typedef struct  _QUEUE_HEADER   {
-	PQUEUE_ENTRY    Head;
-	PQUEUE_ENTRY    Tail;
-	ULONG           Number;
-}   QUEUE_HEADER, *PQUEUE_HEADER;
-
-#define InitializeQueueHeader(QueueHeader)              \
-{                                                       \
-	(QueueHeader)->Head = (QueueHeader)->Tail = NULL;   \
-	(QueueHeader)->Number = 0;                          \
-}
-
-#define RemoveHeadQueue(QueueHeader)                \
-(QueueHeader)->Head;                                \
-{                                                   \
-	PQUEUE_ENTRY pNext;                             \
-	if ((QueueHeader)->Head != NULL)				\
-	{												\
-		pNext = (QueueHeader)->Head->Next;          \
-		(QueueHeader)->Head = pNext;                \
-		if (pNext == NULL)                          \
-			(QueueHeader)->Tail = NULL;             \
-		(QueueHeader)->Number--;                    \
-	}												\
-}
-
-#define InsertHeadQueue(QueueHeader, QueueEntry)            \
-{                                                           \
-		((PQUEUE_ENTRY)QueueEntry)->Next = (QueueHeader)->Head; \
-		(QueueHeader)->Head = (PQUEUE_ENTRY)(QueueEntry);       \
-		if ((QueueHeader)->Tail == NULL)                        \
-			(QueueHeader)->Tail = (PQUEUE_ENTRY)(QueueEntry);   \
-		(QueueHeader)->Number++;                                \
-}
-
-#define InsertTailQueue(QueueHeader, QueueEntry)                \
-{                                                               \
-	((PQUEUE_ENTRY)QueueEntry)->Next = NULL;                    \
-	if ((QueueHeader)->Tail)                                    \
-		(QueueHeader)->Tail->Next = (PQUEUE_ENTRY)(QueueEntry); \
-	else                                                        \
-		(QueueHeader)->Head = (PQUEUE_ENTRY)(QueueEntry);       \
-	(QueueHeader)->Tail = (PQUEUE_ENTRY)(QueueEntry);           \
-	(QueueHeader)->Number++;                                    \
-}
-
-//
-//  Macros for flag and ref count operations
-//
-#define RTMP_SET_FLAG(_M, _F)       ((_M)->Flags |= (_F))
-#define RTMP_CLEAR_FLAG(_M, _F)     ((_M)->Flags &= ~(_F))
-#define RTMP_CLEAR_FLAGS(_M)        ((_M)->Flags = 0)
-#define RTMP_TEST_FLAG(_M, _F)      (((_M)->Flags & (_F)) != 0)
-#define RTMP_TEST_FLAGS(_M, _F)     (((_M)->Flags & (_F)) == (_F))
-
-#define OPSTATUS_SET_FLAG(_pAd, _F)     ((_pAd)->CommonCfg.OpStatusFlags |= (_F))
-#define OPSTATUS_CLEAR_FLAG(_pAd, _F)   ((_pAd)->CommonCfg.OpStatusFlags &= ~(_F))
-#define OPSTATUS_TEST_FLAG(_pAd, _F)    (((_pAd)->CommonCfg.OpStatusFlags & (_F)) != 0)
-
-#define CLIENT_STATUS_SET_FLAG(_pEntry,_F)      ((_pEntry)->ClientStatusFlags |= (_F))
-#define CLIENT_STATUS_CLEAR_FLAG(_pEntry,_F)    ((_pEntry)->ClientStatusFlags &= ~(_F))
-#define CLIENT_STATUS_TEST_FLAG(_pEntry,_F)     (((_pEntry)->ClientStatusFlags & (_F)) != 0)
-
-#define RX_FILTER_SET_FLAG(_pAd, _F)    ((_pAd)->CommonCfg.PacketFilter |= (_F))
-#define RX_FILTER_CLEAR_FLAG(_pAd, _F)  ((_pAd)->CommonCfg.PacketFilter &= ~(_F))
-#define RX_FILTER_TEST_FLAG(_pAd, _F)   (((_pAd)->CommonCfg.PacketFilter & (_F)) != 0)
-
-#ifdef CONFIG_STA_SUPPORT
-#define STA_NO_SECURITY_ON(_p)          (_p->StaCfg.WepStatus == Ndis802_11EncryptionDisabled)
-#define STA_WEP_ON(_p)                  (_p->StaCfg.WepStatus == Ndis802_11Encryption1Enabled)
-#define STA_TKIP_ON(_p)                 (_p->StaCfg.WepStatus == Ndis802_11Encryption2Enabled)
-#define STA_AES_ON(_p)                  (_p->StaCfg.WepStatus == Ndis802_11Encryption3Enabled)
-
-#define STA_TGN_WIFI_ON(_p)             (_p->StaCfg.bTGnWifiTest == TRUE)
-#endif // CONFIG_STA_SUPPORT //
-
-#define CKIP_KP_ON(_p)				((((_p)->StaCfg.CkipFlag) & 0x10) && ((_p)->StaCfg.bCkipCmicOn == TRUE))
-#define CKIP_CMIC_ON(_p)			((((_p)->StaCfg.CkipFlag) & 0x08) && ((_p)->StaCfg.bCkipCmicOn == TRUE))
-
-
-#define INC_RING_INDEX(_idx, _RingSize)    \
-{                                          \
-    (_idx) = (_idx+1) % (_RingSize);       \
-}
-
-#define IS_RT3070(_pAd)				(((_pAd)->MACVersion & 0xffff0000) == 0x30700000)
-
-#define RING_PACKET_INIT(_TxRing, _idx)    \
-{                                          \
-    _TxRing->Cell[_idx].pNdisPacket = NULL;                              \
-    _TxRing->Cell[_idx].pNextNdisPacket = NULL;                              \
-}
-
-#define TXDT_INIT(_TxD)    \
-{                                          \
-	NdisZeroMemory(_TxD, TXD_SIZE);	\
-	_TxD->DMADONE = 1;                              \
-}
-
-//Set last data segment
-#define RING_SET_LASTDS(_TxD, _IsSD0)    \
-{                                          \
-    if (_IsSD0) {_TxD->LastSec0 = 1;}     \
-    else {_TxD->LastSec1 = 1;}     \
-}
-
-// Increase TxTsc value for next transmission
-// TODO:
-// When i==6, means TSC has done one full cycle, do re-keying stuff follow specs
-// Should send a special event microsoft defined to request re-key
-#define INC_TX_TSC(_tsc)                                \
-{                                                       \
-    int i=0;                                            \
-    while (++_tsc[i] == 0x0)                            \
-    {                                                   \
-        i++;                                            \
-        if (i == 6)                                     \
-            break;                                      \
-    }                                                   \
-}
-
-#ifdef DOT11_N_SUPPORT
-// StaActive.SupportedHtPhy.MCSSet is copied from AP beacon.  Don't need to update here.
-#define COPY_HTSETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(_pAd)                                 \
-{                                                                                       \
-	_pAd->StaActive.SupportedHtPhy.ChannelWidth = _pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth;      \
-	_pAd->StaActive.SupportedHtPhy.MimoPs = _pAd->MlmeAux.HtCapability.HtCapInfo.MimoPs;      \
-	_pAd->StaActive.SupportedHtPhy.GF = _pAd->MlmeAux.HtCapability.HtCapInfo.GF;      \
-	_pAd->StaActive.SupportedHtPhy.ShortGIfor20 = _pAd->MlmeAux.HtCapability.HtCapInfo.ShortGIfor20;      \
-	_pAd->StaActive.SupportedHtPhy.ShortGIfor40 = _pAd->MlmeAux.HtCapability.HtCapInfo.ShortGIfor40;      \
-	_pAd->StaActive.SupportedHtPhy.TxSTBC = _pAd->MlmeAux.HtCapability.HtCapInfo.TxSTBC;      \
-	_pAd->StaActive.SupportedHtPhy.RxSTBC = _pAd->MlmeAux.HtCapability.HtCapInfo.RxSTBC;      \
-	_pAd->StaActive.SupportedHtPhy.ExtChanOffset = _pAd->MlmeAux.AddHtInfo.AddHtInfo.ExtChanOffset;      \
-	_pAd->StaActive.SupportedHtPhy.RecomWidth = _pAd->MlmeAux.AddHtInfo.AddHtInfo.RecomWidth;      \
-	_pAd->StaActive.SupportedHtPhy.OperaionMode = _pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode;      \
-	_pAd->StaActive.SupportedHtPhy.NonGfPresent = _pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent;      \
-	NdisMoveMemory((_pAd)->MacTab.Content[BSSID_WCID].HTCapability.MCSSet, (_pAd)->StaActive.SupportedPhyInfo.MCSSet, sizeof(UCHAR) * 16);\
-}
-
-#define COPY_AP_HTSETTINGS_FROM_BEACON(_pAd, _pHtCapability)                                 \
-{                                                                                       \
-	_pAd->MacTab.Content[BSSID_WCID].AMsduSize = (UCHAR)(_pHtCapability->HtCapInfo.AMsduSize);	\
-	_pAd->MacTab.Content[BSSID_WCID].MmpsMode= (UCHAR)(_pHtCapability->HtCapInfo.MimoPs);	\
-	_pAd->MacTab.Content[BSSID_WCID].MaxRAmpduFactor = (UCHAR)(_pHtCapability->HtCapParm.MaxRAmpduFactor);	\
-}
-#endif // DOT11_N_SUPPORT //
-
-//
-// BBP & RF are using indirect access. Before write any value into it.
-// We have to make sure there is no outstanding command pending via checking busy bit.
-//
-#define MAX_BUSY_COUNT  100         // Number of retry before failing access BBP & RF indirect register
-//
-
-#ifdef RT2870
-#define RTMP_RF_IO_WRITE32(_A, _V)                 RTUSBWriteRFRegister(_A, _V)
-#define RTMP_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV)   RTUSBReadBBPRegister(_A, _I, _pV)
-#define RTMP_BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V)   RTUSBWriteBBPRegister(_A, _I, _V)
-
-#define BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V)			RTUSBWriteBBPRegister(_A, _I, _V)
-#define BBP_IO_READ8_BY_REG_ID(_A, _I, _pV)   		RTUSBReadBBPRegister(_A, _I, _pV)
-#endif // RT2870 //
-
-#define     MAP_CHANNEL_ID_TO_KHZ(ch, khz)  {               \
-                switch (ch)                                 \
-                {                                           \
-                    case 1:     khz = 2412000;   break;     \
-                    case 2:     khz = 2417000;   break;     \
-                    case 3:     khz = 2422000;   break;     \
-                    case 4:     khz = 2427000;   break;     \
-                    case 5:     khz = 2432000;   break;     \
-                    case 6:     khz = 2437000;   break;     \
-                    case 7:     khz = 2442000;   break;     \
-                    case 8:     khz = 2447000;   break;     \
-                    case 9:     khz = 2452000;   break;     \
-                    case 10:    khz = 2457000;   break;     \
-                    case 11:    khz = 2462000;   break;     \
-                    case 12:    khz = 2467000;   break;     \
-                    case 13:    khz = 2472000;   break;     \
-                    case 14:    khz = 2484000;   break;     \
-                    case 36:  /* UNII */  khz = 5180000;   break;     \
-                    case 40:  /* UNII */  khz = 5200000;   break;     \
-                    case 44:  /* UNII */  khz = 5220000;   break;     \
-                    case 48:  /* UNII */  khz = 5240000;   break;     \
-                    case 52:  /* UNII */  khz = 5260000;   break;     \
-                    case 56:  /* UNII */  khz = 5280000;   break;     \
-                    case 60:  /* UNII */  khz = 5300000;   break;     \
-                    case 64:  /* UNII */  khz = 5320000;   break;     \
-                    case 149: /* UNII */  khz = 5745000;   break;     \
-                    case 153: /* UNII */  khz = 5765000;   break;     \
-                    case 157: /* UNII */  khz = 5785000;   break;     \
-                    case 161: /* UNII */  khz = 5805000;   break;     \
-                    case 165: /* UNII */  khz = 5825000;   break;     \
-                    case 100: /* HiperLAN2 */  khz = 5500000;   break;     \
-                    case 104: /* HiperLAN2 */  khz = 5520000;   break;     \
-                    case 108: /* HiperLAN2 */  khz = 5540000;   break;     \
-                    case 112: /* HiperLAN2 */  khz = 5560000;   break;     \
-                    case 116: /* HiperLAN2 */  khz = 5580000;   break;     \
-                    case 120: /* HiperLAN2 */  khz = 5600000;   break;     \
-                    case 124: /* HiperLAN2 */  khz = 5620000;   break;     \
-                    case 128: /* HiperLAN2 */  khz = 5640000;   break;     \
-                    case 132: /* HiperLAN2 */  khz = 5660000;   break;     \
-                    case 136: /* HiperLAN2 */  khz = 5680000;   break;     \
-                    case 140: /* HiperLAN2 */  khz = 5700000;   break;     \
-                    case 34:  /* Japan MMAC */   khz = 5170000;   break;   \
-                    case 38:  /* Japan MMAC */   khz = 5190000;   break;   \
-                    case 42:  /* Japan MMAC */   khz = 5210000;   break;   \
-                    case 46:  /* Japan MMAC */   khz = 5230000;   break;   \
-                    case 184: /* Japan */   khz = 4920000;   break;   \
-                    case 188: /* Japan */   khz = 4940000;   break;   \
-                    case 192: /* Japan */   khz = 4960000;   break;   \
-                    case 196: /* Japan */   khz = 4980000;   break;   \
-                    case 208: /* Japan, means J08 */   khz = 5040000;   break;   \
-                    case 212: /* Japan, means J12 */   khz = 5060000;   break;   \
-                    case 216: /* Japan, means J16 */   khz = 5080000;   break;   \
-                    default:    khz = 2412000;   break;     \
-                }                                           \
-            }
-
-#define     MAP_KHZ_TO_CHANNEL_ID(khz, ch)  {               \
-                switch (khz)                                \
-                {                                           \
-                    case 2412000:    ch = 1;     break;     \
-                    case 2417000:    ch = 2;     break;     \
-                    case 2422000:    ch = 3;     break;     \
-                    case 2427000:    ch = 4;     break;     \
-                    case 2432000:    ch = 5;     break;     \
-                    case 2437000:    ch = 6;     break;     \
-                    case 2442000:    ch = 7;     break;     \
-                    case 2447000:    ch = 8;     break;     \
-                    case 2452000:    ch = 9;     break;     \
-                    case 2457000:    ch = 10;    break;     \
-                    case 2462000:    ch = 11;    break;     \
-                    case 2467000:    ch = 12;    break;     \
-                    case 2472000:    ch = 13;    break;     \
-                    case 2484000:    ch = 14;    break;     \
-                    case 5180000:    ch = 36;  /* UNII */  break;     \
-                    case 5200000:    ch = 40;  /* UNII */  break;     \
-                    case 5220000:    ch = 44;  /* UNII */  break;     \
-                    case 5240000:    ch = 48;  /* UNII */  break;     \
-                    case 5260000:    ch = 52;  /* UNII */  break;     \
-                    case 5280000:    ch = 56;  /* UNII */  break;     \
-                    case 5300000:    ch = 60;  /* UNII */  break;     \
-                    case 5320000:    ch = 64;  /* UNII */  break;     \
-                    case 5745000:    ch = 149; /* UNII */  break;     \
-                    case 5765000:    ch = 153; /* UNII */  break;     \
-                    case 5785000:    ch = 157; /* UNII */  break;     \
-                    case 5805000:    ch = 161; /* UNII */  break;     \
-                    case 5825000:    ch = 165; /* UNII */  break;     \
-                    case 5500000:    ch = 100; /* HiperLAN2 */  break;     \
-                    case 5520000:    ch = 104; /* HiperLAN2 */  break;     \
-                    case 5540000:    ch = 108; /* HiperLAN2 */  break;     \
-                    case 5560000:    ch = 112; /* HiperLAN2 */  break;     \
-                    case 5580000:    ch = 116; /* HiperLAN2 */  break;     \
-                    case 5600000:    ch = 120; /* HiperLAN2 */  break;     \
-                    case 5620000:    ch = 124; /* HiperLAN2 */  break;     \
-                    case 5640000:    ch = 128; /* HiperLAN2 */  break;     \
-                    case 5660000:    ch = 132; /* HiperLAN2 */  break;     \
-                    case 5680000:    ch = 136; /* HiperLAN2 */  break;     \
-                    case 5700000:    ch = 140; /* HiperLAN2 */  break;     \
-                    case 5170000:    ch = 34;  /* Japan MMAC */   break;   \
-                    case 5190000:    ch = 38;  /* Japan MMAC */   break;   \
-                    case 5210000:    ch = 42;  /* Japan MMAC */   break;   \
-                    case 5230000:    ch = 46;  /* Japan MMAC */   break;   \
-                    case 4920000:    ch = 184; /* Japan */  break;   \
-                    case 4940000:    ch = 188; /* Japan */  break;   \
-                    case 4960000:    ch = 192; /* Japan */  break;   \
-                    case 4980000:    ch = 196; /* Japan */  break;   \
-                    case 5040000:    ch = 208; /* Japan, means J08 */  break;   \
-                    case 5060000:    ch = 212; /* Japan, means J12 */  break;   \
-                    case 5080000:    ch = 216; /* Japan, means J16 */  break;   \
-                    default:         ch = 1;     break;     \
-                }                                           \
-            }
-
-//
-// Common fragment list structure -  Identical to the scatter gather frag list structure
-//
-//#define RTMP_SCATTER_GATHER_ELEMENT         SCATTER_GATHER_ELEMENT
-//#define PRTMP_SCATTER_GATHER_ELEMENT        PSCATTER_GATHER_ELEMENT
-#define NIC_MAX_PHYS_BUF_COUNT              8
-
-typedef struct _RTMP_SCATTER_GATHER_ELEMENT {
-    PVOID		Address;
-    ULONG		Length;
-    PULONG		Reserved;
-} RTMP_SCATTER_GATHER_ELEMENT, *PRTMP_SCATTER_GATHER_ELEMENT;
-
-
-typedef struct _RTMP_SCATTER_GATHER_LIST {
-    ULONG  NumberOfElements;
-    PULONG Reserved;
-    RTMP_SCATTER_GATHER_ELEMENT Elements[NIC_MAX_PHYS_BUF_COUNT];
-} RTMP_SCATTER_GATHER_LIST, *PRTMP_SCATTER_GATHER_LIST;
-
-//
-//  Some utility macros
-//
-#ifndef min
-#define min(_a, _b)     (((_a) < (_b)) ? (_a) : (_b))
-#endif
-
-#ifndef max
-#define max(_a, _b)     (((_a) > (_b)) ? (_a) : (_b))
-#endif
-
-#define GET_LNA_GAIN(_pAd)	((_pAd->LatchRfRegs.Channel <= 14) ? (_pAd->BLNAGain) : ((_pAd->LatchRfRegs.Channel <= 64) ? (_pAd->ALNAGain0) : ((_pAd->LatchRfRegs.Channel <= 128) ? (_pAd->ALNAGain1) : (_pAd->ALNAGain2))))
-
-#define INC_COUNTER64(Val)          (Val.QuadPart++)
-
-#define INFRA_ON(_p)                (OPSTATUS_TEST_FLAG(_p, fOP_STATUS_INFRA_ON))
-#define ADHOC_ON(_p)                (OPSTATUS_TEST_FLAG(_p, fOP_STATUS_ADHOC_ON))
-#define MONITOR_ON(_p)              (((_p)->StaCfg.BssType) == BSS_MONITOR)
-#define IDLE_ON(_p)                 (!INFRA_ON(_p) && !ADHOC_ON(_p))
-
-// Check LEAP & CCKM flags
-#define LEAP_ON(_p)                 (((_p)->StaCfg.LeapAuthMode) == CISCO_AuthModeLEAP)
-#define LEAP_CCKM_ON(_p)            ((((_p)->StaCfg.LeapAuthMode) == CISCO_AuthModeLEAP) && ((_p)->StaCfg.LeapAuthInfo.CCKM == TRUE))
-
-// if orginal Ethernet frame contains no LLC/SNAP, then an extra LLC/SNAP encap is required
-#define EXTRA_LLCSNAP_ENCAP_FROM_PKT_START(_pBufVA, _pExtraLlcSnapEncap)		\
-{																\
-	if (((*(_pBufVA + 12) << 8) + *(_pBufVA + 13)) > 1500)		\
-	{															\
-		_pExtraLlcSnapEncap = SNAP_802_1H;						\
-		if (NdisEqualMemory(IPX, _pBufVA + 12, 2) || 			\
-			NdisEqualMemory(APPLE_TALK, _pBufVA + 12, 2))		\
-		{														\
-			_pExtraLlcSnapEncap = SNAP_BRIDGE_TUNNEL;			\
-		}														\
-	}															\
-	else														\
-	{															\
-		_pExtraLlcSnapEncap = NULL;								\
-	}															\
-}
-
-// New Define for new Tx Path.
-#define EXTRA_LLCSNAP_ENCAP_FROM_PKT_OFFSET(_pBufVA, _pExtraLlcSnapEncap)	\
-{																\
-	if (((*(_pBufVA) << 8) + *(_pBufVA + 1)) > 1500)			\
-	{															\
-		_pExtraLlcSnapEncap = SNAP_802_1H;						\
-		if (NdisEqualMemory(IPX, _pBufVA, 2) || 				\
-			NdisEqualMemory(APPLE_TALK, _pBufVA, 2))			\
-		{														\
-			_pExtraLlcSnapEncap = SNAP_BRIDGE_TUNNEL;			\
-		}														\
-	}															\
-	else														\
-	{															\
-		_pExtraLlcSnapEncap = NULL;								\
-	}															\
-}
-
-
-#define MAKE_802_3_HEADER(_p, _pMac1, _pMac2, _pType)                   \
-{                                                                       \
-    NdisMoveMemory(_p, _pMac1, MAC_ADDR_LEN);                           \
-    NdisMoveMemory((_p + MAC_ADDR_LEN), _pMac2, MAC_ADDR_LEN);          \
-    NdisMoveMemory((_p + MAC_ADDR_LEN * 2), _pType, LENGTH_802_3_TYPE); \
-}
-
-// if pData has no LLC/SNAP (neither RFC1042 nor Bridge tunnel), keep it that way.
-// else if the received frame is LLC/SNAP-encaped IPX or APPLETALK, preserve the LLC/SNAP field
-// else remove the LLC/SNAP field from the result Ethernet frame
-// Patch for WHQL only, which did not turn on Netbios but use IPX within its payload
-// Note:
-//     _pData & _DataSize may be altered (remove 8-byte LLC/SNAP) by this MACRO
-//     _pRemovedLLCSNAP: pointer to removed LLC/SNAP; NULL is not removed
-#define CONVERT_TO_802_3(_p8023hdr, _pDA, _pSA, _pData, _DataSize, _pRemovedLLCSNAP)      \
-{                                                                       \
-    char LLC_Len[2];                                                    \
-                                                                        \
-    _pRemovedLLCSNAP = NULL;                                            \
-    if (NdisEqualMemory(SNAP_802_1H, _pData, 6)  ||                     \
-        NdisEqualMemory(SNAP_BRIDGE_TUNNEL, _pData, 6))                 \
-    {                                                                   \
-        PUCHAR pProto = _pData + 6;                                     \
-                                                                        \
-        if ((NdisEqualMemory(IPX, pProto, 2) || NdisEqualMemory(APPLE_TALK, pProto, 2)) &&  \
-            NdisEqualMemory(SNAP_802_1H, _pData, 6))                    \
-        {                                                               \
-            LLC_Len[0] = (UCHAR)(_DataSize / 256);                      \
-            LLC_Len[1] = (UCHAR)(_DataSize % 256);                      \
-            MAKE_802_3_HEADER(_p8023hdr, _pDA, _pSA, LLC_Len);          \
-        }                                                               \
-        else                                                            \
-        {                                                               \
-            MAKE_802_3_HEADER(_p8023hdr, _pDA, _pSA, pProto);           \
-            _pRemovedLLCSNAP = _pData;                                  \
-            _DataSize -= LENGTH_802_1_H;                                \
-            _pData += LENGTH_802_1_H;                                   \
-        }                                                               \
-    }                                                                   \
-    else                                                                \
-    {                                                                   \
-        LLC_Len[0] = (UCHAR)(_DataSize / 256);                          \
-        LLC_Len[1] = (UCHAR)(_DataSize % 256);                          \
-        MAKE_802_3_HEADER(_p8023hdr, _pDA, _pSA, LLC_Len);              \
-    }                                                                   \
-}
-
-#define SWITCH_AB( _pAA, _pBB)    \
-{                                                                           \
-    PVOID pCC;                                                          \
-    pCC = _pBB;                                                 \
-    _pBB = _pAA;                                                 \
-    _pAA = pCC;                                                 \
-}
-
-// Enqueue this frame to MLME engine
-// We need to enqueue the whole frame because MLME need to pass data type
-// information from 802.11 header
-#ifdef RT2870
-#define REPORT_MGMT_FRAME_TO_MLME(_pAd, Wcid, _pFrame, _FrameSize, _Rssi0, _Rssi1, _Rssi2, _PlcpSignal)        \
-{                                                                                       \
-    UINT32 High32TSF=0, Low32TSF=0;                                                          \
-    MlmeEnqueueForRecv(_pAd, Wcid, High32TSF, Low32TSF, (UCHAR)_Rssi0, (UCHAR)_Rssi1,(UCHAR)_Rssi2,_FrameSize, _pFrame, (UCHAR)_PlcpSignal);   \
-}
-#endif // RT2870 //
-
-#define NDIS_QUERY_BUFFER(_NdisBuf, _ppVA, _pBufLen)                    \
-    NdisQueryBuffer(_NdisBuf, _ppVA, _pBufLen)
-
-#define MAC_ADDR_EQUAL(pAddr1,pAddr2)           RTMPEqualMemory((PVOID)(pAddr1), (PVOID)(pAddr2), MAC_ADDR_LEN)
-#define SSID_EQUAL(ssid1, len1, ssid2, len2)    ((len1==len2) && (RTMPEqualMemory(ssid1, ssid2, len1)))
-
-//
-// Check if it is Japan W53(ch52,56,60,64) channel.
-//
-#define JapanChannelCheck(channel)  ((channel == 52) || (channel == 56) || (channel == 60) || (channel == 64))
-
-#ifdef CONFIG_STA_SUPPORT
-#define STA_PORT_SECURED(_pAd) \
-{ \
-	_pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; \
-	NdisAcquireSpinLock(&_pAd->MacTabLock); \
-	_pAd->MacTab.Content[BSSID_WCID].PortSecured = _pAd->StaCfg.PortSecured; \
-	NdisReleaseSpinLock(&_pAd->MacTabLock); \
-}
-#endif // CONFIG_STA_SUPPORT //
-
-
-//
-// Register set pair for initialzation register set definition
-//
-typedef struct  _RTMP_REG_PAIR
-{
-	ULONG   Register;
-	ULONG   Value;
-} RTMP_REG_PAIR, *PRTMP_REG_PAIR;
-
-typedef struct  _REG_PAIR
-{
-	UCHAR   Register;
-	UCHAR   Value;
-} REG_PAIR, *PREG_PAIR;
-
-//
-// Register set pair for initialzation register set definition
-//
-typedef struct  _RTMP_RF_REGS
-{
-	UCHAR   Channel;
-	ULONG   R1;
-	ULONG   R2;
-	ULONG   R3;
-	ULONG   R4;
-} RTMP_RF_REGS, *PRTMP_RF_REGS;
-
-typedef struct _FREQUENCY_ITEM {
-	UCHAR	Channel;
-	UCHAR	N;
-	UCHAR	R;
-	UCHAR	K;
-} FREQUENCY_ITEM, *PFREQUENCY_ITEM;
-
-//
-//  Data buffer for DMA operation, the buffer must be contiguous physical memory
-//  Both DMA to / from CPU use the same structure.
-//
-typedef struct  _RTMP_DMABUF
-{
-	ULONG                   AllocSize;
-	PVOID                   AllocVa;            // TxBuf virtual address
-	NDIS_PHYSICAL_ADDRESS   AllocPa;            // TxBuf physical address
-} RTMP_DMABUF, *PRTMP_DMABUF;
-
-
-typedef	union	_HEADER_802_11_SEQ{
-#ifdef RT_BIG_ENDIAN
-    struct {
-   	USHORT			Sequence:12;
-	USHORT			Frag:4;
-    }   field;
-#else
-    struct {
-	USHORT			Frag:4;
-	USHORT			Sequence:12;
-    }   field;
-#endif
-    USHORT           value;
-}	HEADER_802_11_SEQ, *PHEADER_802_11_SEQ;
-
-//
-//  Data buffer for DMA operation, the buffer must be contiguous physical memory
-//  Both DMA to / from CPU use the same structure.
-//
-typedef struct  _RTMP_REORDERBUF
-{
-	BOOLEAN			IsFull;
-	PVOID                   AllocVa;            // TxBuf virtual address
-	UCHAR			Header802_3[14];
-	HEADER_802_11_SEQ			Sequence;	//support compressed bitmap BA, so no consider fragment in BA
-	UCHAR 		DataOffset;
-	USHORT 		Datasize;
-	ULONG                   AllocSize;
-#ifdef RT2870
-	PUCHAR					AllocPa;
-#endif // RT2870 //
-}   RTMP_REORDERBUF, *PRTMP_REORDERBUF;
-
-//
-// Control block (Descriptor) for all ring descriptor DMA operation, buffer must be
-// contiguous physical memory. NDIS_PACKET stored the binding Rx packet descriptor
-// which won't be released, driver has to wait until upper layer return the packet
-// before giveing up this rx ring descriptor to ASIC. NDIS_BUFFER is assocaited pair
-// to describe the packet buffer. For Tx, NDIS_PACKET stored the tx packet descriptor
-// which driver should ACK upper layer when the tx is physically done or failed.
-//
-typedef struct _RTMP_DMACB
-{
-	ULONG                   AllocSize;          // Control block size
-	PVOID                   AllocVa;            // Control block virtual address
-	NDIS_PHYSICAL_ADDRESS   AllocPa;            // Control block physical address
-	PNDIS_PACKET pNdisPacket;
-	PNDIS_PACKET pNextNdisPacket;
-
-	RTMP_DMABUF             DmaBuf;             // Associated DMA buffer structure
-} RTMP_DMACB, *PRTMP_DMACB;
-
-typedef struct _RTMP_TX_BUF
-{
-	PQUEUE_ENTRY    Next;
-	UCHAR           Index;
-	ULONG                   AllocSize;          // Control block size
-	PVOID                   AllocVa;            // Control block virtual address
-	NDIS_PHYSICAL_ADDRESS   AllocPa;            // Control block physical address
-} RTMP_TXBUF, *PRTMP_TXBUF;
-
-typedef struct _RTMP_RX_BUF
-{
-	BOOLEAN           InUse;
-	ULONG           	ByBaRecIndex;
-	RTMP_REORDERBUF	MAP_RXBuf[MAX_RX_REORDERBUF];
-} RTMP_RXBUF, *PRTMP_RXBUF;
-typedef struct _RTMP_TX_RING
-{
-	RTMP_DMACB  Cell[TX_RING_SIZE];
-	UINT32		TxCpuIdx;
-	UINT32		TxDmaIdx;
-	UINT32		TxSwFreeIdx; 	// software next free tx index
-} RTMP_TX_RING, *PRTMP_TX_RING;
-
-typedef struct _RTMP_RX_RING
-{
-	RTMP_DMACB  Cell[RX_RING_SIZE];
-	UINT32		RxCpuIdx;
-	UINT32		RxDmaIdx;
-	INT32		RxSwReadIdx; 	// software next read index
-} RTMP_RX_RING, *PRTMP_RX_RING;
-
-typedef struct _RTMP_MGMT_RING
-{
-	RTMP_DMACB  Cell[MGMT_RING_SIZE];
-	UINT32		TxCpuIdx;
-	UINT32		TxDmaIdx;
-	UINT32		TxSwFreeIdx; // software next free tx index
-} RTMP_MGMT_RING, *PRTMP_MGMT_RING;
-
-//
-//  Statistic counter structure
-//
-typedef struct _COUNTER_802_3
-{
-	// General Stats
-	ULONG       GoodTransmits;
-	ULONG       GoodReceives;
-	ULONG       TxErrors;
-	ULONG       RxErrors;
-	ULONG       RxNoBuffer;
-
-	// Ethernet Stats
-	ULONG       RcvAlignmentErrors;
-	ULONG       OneCollision;
-	ULONG       MoreCollisions;
-
-} COUNTER_802_3, *PCOUNTER_802_3;
-
-typedef struct _COUNTER_802_11 {
-	ULONG           Length;
-	LARGE_INTEGER   LastTransmittedFragmentCount;
-	LARGE_INTEGER   TransmittedFragmentCount;
-	LARGE_INTEGER   MulticastTransmittedFrameCount;
-	LARGE_INTEGER   FailedCount;
-	LARGE_INTEGER   RetryCount;
-	LARGE_INTEGER   MultipleRetryCount;
-	LARGE_INTEGER   RTSSuccessCount;
-	LARGE_INTEGER   RTSFailureCount;
-	LARGE_INTEGER   ACKFailureCount;
-	LARGE_INTEGER   FrameDuplicateCount;
-	LARGE_INTEGER   ReceivedFragmentCount;
-	LARGE_INTEGER   MulticastReceivedFrameCount;
-	LARGE_INTEGER   FCSErrorCount;
-} COUNTER_802_11, *PCOUNTER_802_11;
-
-typedef struct _COUNTER_RALINK {
-	ULONG           TransmittedByteCount;   // both successful and failure, used to calculate TX throughput
-	ULONG           ReceivedByteCount;      // both CRC okay and CRC error, used to calculate RX throughput
-	ULONG           BeenDisassociatedCount;
-	ULONG           BadCQIAutoRecoveryCount;
-	ULONG           PoorCQIRoamingCount;
-	ULONG           MgmtRingFullCount;
-	ULONG           RxCountSinceLastNULL;
-	ULONG           RxCount;
-	ULONG           RxRingErrCount;
-	ULONG           KickTxCount;
-	ULONG           TxRingErrCount;
-	LARGE_INTEGER   RealFcsErrCount;
-	ULONG           PendingNdisPacketCount;
-
-	ULONG           OneSecOsTxCount[NUM_OF_TX_RING];
-	ULONG           OneSecDmaDoneCount[NUM_OF_TX_RING];
-	UINT32          OneSecTxDoneCount;
-	ULONG           OneSecRxCount;
-	UINT32          OneSecTxAggregationCount;
-	UINT32          OneSecRxAggregationCount;
-
-	UINT32   		OneSecFrameDuplicateCount;
-
-#ifdef RT2870
-	ULONG           OneSecTransmittedByteCount;   // both successful and failure, used to calculate TX throughput
-#endif // RT2870 //
-
-	UINT32          OneSecTxNoRetryOkCount;
-	UINT32          OneSecTxRetryOkCount;
-	UINT32          OneSecTxFailCount;
-	UINT32          OneSecFalseCCACnt;      // CCA error count, for debug purpose, might move to global counter
-	UINT32          OneSecRxOkCnt;          // RX without error
-	UINT32          OneSecRxOkDataCnt;      // unicast-to-me DATA frame count
-	UINT32          OneSecRxFcsErrCnt;      // CRC error
-	UINT32          OneSecBeaconSentCnt;
-	UINT32          LastOneSecTotalTxCount; // OneSecTxNoRetryOkCount + OneSecTxRetryOkCount + OneSecTxFailCount
-	UINT32          LastOneSecRxOkDataCnt;  // OneSecRxOkDataCnt
-	ULONG		DuplicateRcv;
-	ULONG		TxAggCount;
-	ULONG		TxNonAggCount;
-	ULONG		TxAgg1MPDUCount;
-	ULONG		TxAgg2MPDUCount;
-	ULONG		TxAgg3MPDUCount;
-	ULONG		TxAgg4MPDUCount;
-	ULONG		TxAgg5MPDUCount;
-	ULONG		TxAgg6MPDUCount;
-	ULONG		TxAgg7MPDUCount;
-	ULONG		TxAgg8MPDUCount;
-	ULONG		TxAgg9MPDUCount;
-	ULONG		TxAgg10MPDUCount;
-	ULONG		TxAgg11MPDUCount;
-	ULONG		TxAgg12MPDUCount;
-	ULONG		TxAgg13MPDUCount;
-	ULONG		TxAgg14MPDUCount;
-	ULONG		TxAgg15MPDUCount;
-	ULONG		TxAgg16MPDUCount;
-
-	LARGE_INTEGER       TransmittedOctetsInAMSDU;
-	LARGE_INTEGER       TransmittedAMSDUCount;
-	LARGE_INTEGER       ReceivedOctesInAMSDUCount;
-	LARGE_INTEGER       ReceivedAMSDUCount;
-	LARGE_INTEGER       TransmittedAMPDUCount;
-	LARGE_INTEGER       TransmittedMPDUsInAMPDUCount;
-	LARGE_INTEGER       TransmittedOctetsInAMPDUCount;
-	LARGE_INTEGER       MPDUInReceivedAMPDUCount;
-} COUNTER_RALINK, *PCOUNTER_RALINK;
-
-typedef struct _PID_COUNTER {
-	ULONG           TxAckRequiredCount;      // CRC error
-	ULONG           TxAggreCount;
-	ULONG           TxSuccessCount; // OneSecTxNoRetryOkCount + OneSecTxRetryOkCount + OneSecTxFailCount
-	ULONG		LastSuccessRate;
-} PID_COUNTER, *PPID_COUNTER;
-
-typedef struct _COUNTER_DRS {
-	// to record the each TX rate's quality. 0 is best, the bigger the worse.
-	USHORT          TxQuality[MAX_STEP_OF_TX_RATE_SWITCH];
-	UCHAR           PER[MAX_STEP_OF_TX_RATE_SWITCH];
-	UCHAR           TxRateUpPenalty;      // extra # of second penalty due to last unstable condition
-	ULONG           CurrTxRateStableTime; // # of second in current TX rate
-	BOOLEAN         fNoisyEnvironment;
-	BOOLEAN         fLastSecAccordingRSSI;
-	UCHAR           LastSecTxRateChangeAction; // 0: no change, 1:rate UP, 2:rate down
-	UCHAR			LastTimeTxRateChangeAction; //Keep last time value of LastSecTxRateChangeAction
-	ULONG			LastTxOkCount;
-} COUNTER_DRS, *PCOUNTER_DRS;
-
-//
-//  Arcfour Structure Added by PaulWu
-//
-typedef struct  _ARCFOUR
-{
-	UINT            X;
-	UINT            Y;
-	UCHAR           STATE[256];
-} ARCFOURCONTEXT, *PARCFOURCONTEXT;
-
-// MIMO Tx parameter, ShortGI, MCS, STBC, etc.  these are fields in TXWI too. just copy to TXWI.
-typedef struct  _RECEIVE_SETTING {
-#ifdef RT_BIG_ENDIAN
-	USHORT		MIMO:1;
-	USHORT		OFDM:1;
-	USHORT		rsv:3;
-	USHORT		STBC:2;	//SPACE
-	USHORT		ShortGI:1;
-	USHORT		Mode:2;	//channel bandwidth 20MHz or 40 MHz
-	USHORT   	NumOfRX:2;                 // MIMO. WE HAVE 3R
-#else
-	USHORT   	NumOfRX:2;                 // MIMO. WE HAVE 3R
-	USHORT		Mode:2;	//channel bandwidth 20MHz or 40 MHz
-	USHORT		ShortGI:1;
-	USHORT		STBC:2;	//SPACE
-	USHORT		rsv:3;
-	USHORT		OFDM:1;
-	USHORT		MIMO:1;
-#endif
- } RECEIVE_SETTING, *PRECEIVE_SETTING;
-
-// Shared key data structure
-typedef struct  _WEP_KEY {
-	UCHAR   KeyLen;                     // Key length for each key, 0: entry is invalid
-	UCHAR   Key[MAX_LEN_OF_KEY];        // right now we implement 4 keys, 128 bits max
-} WEP_KEY, *PWEP_KEY;
-
-typedef struct _CIPHER_KEY {
-	UCHAR   Key[16];            // right now we implement 4 keys, 128 bits max
-	UCHAR   RxMic[8];			// make alignment
-	UCHAR   TxMic[8];
-	UCHAR   TxTsc[6];           // 48bit TSC value
-	UCHAR   RxTsc[6];           // 48bit TSC value
-	UCHAR   CipherAlg;          // 0-none, 1:WEP64, 2:WEP128, 3:TKIP, 4:AES, 5:CKIP64, 6:CKIP128
-	UCHAR   KeyLen;
-#ifdef CONFIG_STA_SUPPORT
-	UCHAR   BssId[6];
-#endif // CONFIG_STA_SUPPORT //
-            // Key length for each key, 0: entry is invalid
-	UCHAR   Type;               // Indicate Pairwise/Group when reporting MIC error
-} CIPHER_KEY, *PCIPHER_KEY;
-
-typedef struct _BBP_TUNING_STRUCT {
-	BOOLEAN     Enable;
-	UCHAR       FalseCcaCountUpperBound;  // 100 per sec
-	UCHAR       FalseCcaCountLowerBound;  // 10 per sec
-	UCHAR       R17LowerBound;            // specified in E2PROM
-	UCHAR       R17UpperBound;            // 0x68 according to David Tung
-	UCHAR       CurrentR17Value;
-} BBP_TUNING, *PBBP_TUNING;
-
-typedef struct _SOFT_RX_ANT_DIVERSITY_STRUCT {
-	UCHAR     EvaluatePeriod;		 // 0:not evalute status, 1: evaluate status, 2: switching status
-	UCHAR     Pair1PrimaryRxAnt;     // 0:Ant-E1, 1:Ant-E2
-	UCHAR     Pair1SecondaryRxAnt;   // 0:Ant-E1, 1:Ant-E2
-	UCHAR     Pair2PrimaryRxAnt;     // 0:Ant-E3, 1:Ant-E4
-	UCHAR     Pair2SecondaryRxAnt;   // 0:Ant-E3, 1:Ant-E4
-	SHORT     Pair1AvgRssi[2];       // AvgRssi[0]:E1, AvgRssi[1]:E2
-	SHORT     Pair2AvgRssi[2];       // AvgRssi[0]:E3, AvgRssi[1]:E4
-	SHORT     Pair1LastAvgRssi;      //
-	SHORT     Pair2LastAvgRssi;      //
-	ULONG     RcvPktNumWhenEvaluate;
-	BOOLEAN   FirstPktArrivedWhenEvaluate;
-	RALINK_TIMER_STRUCT    RxAntDiversityTimer;
-} SOFT_RX_ANT_DIVERSITY, *PSOFT_RX_ANT_DIVERSITY;
-
-typedef struct _LEAP_AUTH_INFO {
-	BOOLEAN         Enabled;        //Ture: Enable LEAP Authentication
-	BOOLEAN         CCKM;           //Ture: Use Fast Reauthentication with CCKM
-	UCHAR           Reserve[2];
-	UCHAR           UserName[256];  //LEAP, User name
-	ULONG           UserNameLen;
-	UCHAR           Password[256];  //LEAP, User Password
-	ULONG           PasswordLen;
-} LEAP_AUTH_INFO, *PLEAP_AUTH_INFO;
-
-typedef struct {
-	UCHAR        Addr[MAC_ADDR_LEN];
-	UCHAR        ErrorCode[2];  //00 01-Invalid authentication type
-								//00 02-Authentication timeout
-								//00 03-Challenge from AP failed
-								//00 04-Challenge to AP failed
-	BOOLEAN      Reported;
-} ROGUEAP_ENTRY, *PROGUEAP_ENTRY;
-
-typedef struct {
-	UCHAR               RogueApNr;
-	ROGUEAP_ENTRY       RogueApEntry[MAX_LEN_OF_BSS_TABLE];
-} ROGUEAP_TABLE, *PROGUEAP_TABLE;
-
-typedef struct {
-	BOOLEAN     Enable;
-	UCHAR       Delta;
-	BOOLEAN     PlusSign;
-} CCK_TX_POWER_CALIBRATE, *PCCK_TX_POWER_CALIBRATE;
-
-//
-// Receive Tuple Cache Format
-//
-typedef struct  _TUPLE_CACHE    {
-	BOOLEAN         Valid;
-	UCHAR           MacAddress[MAC_ADDR_LEN];
-	USHORT          Sequence;
-	USHORT          Frag;
-} TUPLE_CACHE, *PTUPLE_CACHE;
-
-//
-// Fragment Frame structure
-//
-typedef struct  _FRAGMENT_FRAME {
-	PNDIS_PACKET    pFragPacket;
-	ULONG       RxSize;
-	USHORT      Sequence;
-	USHORT      LastFrag;
-	ULONG       Flags;          // Some extra frame information. bit 0: LLC presented
-} FRAGMENT_FRAME, *PFRAGMENT_FRAME;
-
-
-//
-// Packet information for NdisQueryPacket
-//
-typedef struct  _PACKET_INFO    {
-	UINT            PhysicalBufferCount;    // Physical breaks of buffer descripor chained
-	UINT            BufferCount ;           // Number of Buffer descriptor chained
-	UINT            TotalPacketLength ;     // Self explained
-	PNDIS_BUFFER    pFirstBuffer;           // Pointer to first buffer descriptor
-} PACKET_INFO, *PPACKET_INFO;
-
-//
-// Tkip Key structure which RC4 key & MIC calculation
-//
-typedef struct  _TKIP_KEY_INFO  {
-	UINT        nBytesInM;  // # bytes in M for MICKEY
-	ULONG       IV16;
-	ULONG       IV32;
-	ULONG       K0;         // for MICKEY Low
-	ULONG       K1;         // for MICKEY Hig
-	ULONG       L;          // Current state for MICKEY
-	ULONG       R;          // Current state for MICKEY
-	ULONG       M;          // Message accumulator for MICKEY
-	UCHAR       RC4KEY[16];
-	UCHAR       MIC[8];
-} TKIP_KEY_INFO, *PTKIP_KEY_INFO;
-
-//
-// Private / Misc data, counters for driver internal use
-//
-typedef struct  __PRIVATE_STRUC {
-	UINT       SystemResetCnt;         // System reset counter
-	UINT       TxRingFullCnt;          // Tx ring full occurrance number
-	UINT       PhyRxErrCnt;            // PHY Rx error count, for debug purpose, might move to global counter
-	// Variables for WEP encryption / decryption in rtmp_wep.c
-	UINT       FCSCRC32;
-	ARCFOURCONTEXT  WEPCONTEXT;
-	// Tkip stuff
-	TKIP_KEY_INFO   Tx;
-	TKIP_KEY_INFO   Rx;
-} PRIVATE_STRUC, *PPRIVATE_STRUC;
-
-// structure to tune BBP R66 (BBP TUNING)
-typedef struct _BBP_R66_TUNING {
-	BOOLEAN     bEnable;
-	USHORT      FalseCcaLowerThreshold;  // default 100
-	USHORT      FalseCcaUpperThreshold;  // default 512
-	UCHAR       R66Delta;
-	UCHAR       R66CurrentValue;
-	BOOLEAN		R66LowerUpperSelect; //Before LinkUp, Used LowerBound or UpperBound as R66 value.
-} BBP_R66_TUNING, *PBBP_R66_TUNING;
-
-// structure to store channel TX power
-typedef struct _CHANNEL_TX_POWER {
-	USHORT     RemainingTimeForUse;		//unit: sec
-	UCHAR      Channel;
-#ifdef DOT11N_DRAFT3
-	BOOLEAN       bEffectedChannel;	// For BW 40 operating in 2.4GHz , the "effected channel" is the channel that is covered in 40Mhz.
-#endif // DOT11N_DRAFT3 //
-	CHAR       Power;
-	CHAR       Power2;
-	UCHAR      MaxTxPwr;
-	UCHAR      DfsReq;
-} CHANNEL_TX_POWER, *PCHANNEL_TX_POWER;
-
-// structure to store 802.11j channel TX power
-typedef struct _CHANNEL_11J_TX_POWER {
-	UCHAR      Channel;
-	UCHAR      BW;	// BW_10 or BW_20
-	CHAR       Power;
-	CHAR       Power2;
-	USHORT     RemainingTimeForUse;		//unit: sec
-} CHANNEL_11J_TX_POWER, *PCHANNEL_11J_TX_POWER;
-
-typedef enum _ABGBAND_STATE_ {
-	UNKNOWN_BAND,
-	BG_BAND,
-	A_BAND,
-} ABGBAND_STATE;
-
-typedef struct _MLME_STRUCT {
-#ifdef CONFIG_STA_SUPPORT
-	// STA state machines
-	STATE_MACHINE           CntlMachine;
-	STATE_MACHINE           AssocMachine;
-	STATE_MACHINE           AuthMachine;
-	STATE_MACHINE           AuthRspMachine;
-	STATE_MACHINE           SyncMachine;
-	STATE_MACHINE           WpaPskMachine;
-	STATE_MACHINE           LeapMachine;
-	STATE_MACHINE           AironetMachine;
-	STATE_MACHINE_FUNC      AssocFunc[ASSOC_FUNC_SIZE];
-	STATE_MACHINE_FUNC      AuthFunc[AUTH_FUNC_SIZE];
-	STATE_MACHINE_FUNC      AuthRspFunc[AUTH_RSP_FUNC_SIZE];
-	STATE_MACHINE_FUNC      SyncFunc[SYNC_FUNC_SIZE];
-	STATE_MACHINE_FUNC      WpaPskFunc[WPA_PSK_FUNC_SIZE];
-	STATE_MACHINE_FUNC      AironetFunc[AIRONET_FUNC_SIZE];
-#endif // CONFIG_STA_SUPPORT //
-	STATE_MACHINE_FUNC      ActFunc[ACT_FUNC_SIZE];
-	// Action
-	STATE_MACHINE           ActMachine;
-
-
-#ifdef QOS_DLS_SUPPORT
-	STATE_MACHINE			DlsMachine;
-	STATE_MACHINE_FUNC      DlsFunc[DLS_FUNC_SIZE];
-#endif // QOS_DLS_SUPPORT //
-
-
-
-
-	ULONG                   ChannelQuality;  // 0..100, Channel Quality Indication for Roaming
-	ULONG                   Now32;           // latch the value of NdisGetSystemUpTime()
-	ULONG                   LastSendNULLpsmTime;
-
-	BOOLEAN                 bRunning;
-	NDIS_SPIN_LOCK          TaskLock;
-	MLME_QUEUE              Queue;
-
-	UINT                    ShiftReg;
-
-	RALINK_TIMER_STRUCT     PeriodicTimer;
-	RALINK_TIMER_STRUCT     APSDPeriodicTimer;
-	RALINK_TIMER_STRUCT     LinkDownTimer;
-	RALINK_TIMER_STRUCT     LinkUpTimer;
-	ULONG                   PeriodicRound;
-	ULONG                   OneSecPeriodicRound;
-
-	UCHAR					RealRxPath;
-	BOOLEAN					bLowThroughput;
-	BOOLEAN					bEnableAutoAntennaCheck;
-	RALINK_TIMER_STRUCT		RxAntEvalTimer;
-
-#ifdef RT2870
-	UCHAR CaliBW40RfR24;
-	UCHAR CaliBW20RfR24;
-#endif // RT2870 //
-
-} MLME_STRUCT, *PMLME_STRUCT;
-
-// structure for radar detection and channel switch
-typedef struct _RADAR_DETECT_STRUCT {
-    //BOOLEAN		IEEE80211H;			// 0: disable, 1: enable IEEE802.11h
-	UCHAR		CSCount;			//Channel switch counter
-	UCHAR		CSPeriod;			//Channel switch period (beacon count)
-	UCHAR		RDCount;			//Radar detection counter
-	UCHAR		RDMode;				//Radar Detection mode
-	UCHAR		RDDurRegion;		//Radar detection duration region
-	UCHAR		BBPR16;
-	UCHAR		BBPR17;
-	UCHAR		BBPR18;
-	UCHAR		BBPR21;
-	UCHAR		BBPR22;
-	UCHAR		BBPR64;
-	ULONG		InServiceMonitorCount; // unit: sec
-	UINT8		DfsSessionTime;
-	BOOLEAN		bFastDfs;
-	UINT8		ChMovingTime;
-	UINT8		LongPulseRadarTh;
-} RADAR_DETECT_STRUCT, *PRADAR_DETECT_STRUCT;
-
-#ifdef CARRIER_DETECTION_SUPPORT
-typedef enum CD_STATE_n
-{
-	CD_NORMAL,
-	CD_SILENCE,
-	CD_MAX_STATE
-} CD_STATE;
-
-typedef struct CARRIER_DETECTION_s
-{
-	BOOLEAN					Enable;
-	UINT8					CDSessionTime;
-	UINT8					CDPeriod;
-	CD_STATE				CD_State;
-} CARRIER_DETECTION, *PCARRIER_DETECTION;
-#endif // CARRIER_DETECTION_SUPPORT //
-
-typedef enum _REC_BLOCKACK_STATUS
-{
-    Recipient_NONE=0,
-	Recipient_USED,
-	Recipient_HandleRes,
-    Recipient_Accept
-} REC_BLOCKACK_STATUS, *PREC_BLOCKACK_STATUS;
-
-typedef enum _ORI_BLOCKACK_STATUS
-{
-    Originator_NONE=0,
-	Originator_USED,
-    Originator_WaitRes,
-    Originator_Done
-} ORI_BLOCKACK_STATUS, *PORI_BLOCKACK_STATUS;
-
-#ifdef DOT11_N_SUPPORT
-typedef struct _BA_ORI_ENTRY{
-	UCHAR   Wcid;
-	UCHAR   TID;
-	UCHAR   BAWinSize;
-	UCHAR   Token;
-// Sequence is to fill every outgoing QoS DATA frame's sequence field in 802.11 header.
-	USHORT	Sequence;
-	USHORT	TimeOutValue;
-	ORI_BLOCKACK_STATUS  ORI_BA_Status;
-	RALINK_TIMER_STRUCT ORIBATimer;
-	PVOID	pAdapter;
-} BA_ORI_ENTRY, *PBA_ORI_ENTRY;
-
-typedef struct _BA_REC_ENTRY {
-	UCHAR   Wcid;
-	UCHAR   TID;
-	UCHAR   BAWinSize;	// 7.3.1.14. each buffer is capable of holding a max AMSDU or MSDU.
-	//UCHAR	NumOfRxPkt;
-	//UCHAR    Curindidx; // the head in the RX reordering buffer
-	USHORT		LastIndSeq;
-//	USHORT		LastIndSeqAtTimer;
-	USHORT		TimeOutValue;
-	RALINK_TIMER_STRUCT RECBATimer;
-	ULONG		LastIndSeqAtTimer;
-	ULONG		nDropPacket;
-	ULONG		rcvSeq;
-	REC_BLOCKACK_STATUS  REC_BA_Status;
-//	UCHAR	RxBufIdxUsed;
-	// corresponding virtual address for RX reordering packet storage.
-	//RTMP_REORDERDMABUF MAP_RXBuf[MAX_RX_REORDERBUF];
-	NDIS_SPIN_LOCK          RxReRingLock;                 // Rx Ring spinlock
-//	struct _BA_REC_ENTRY *pNext;
-	PVOID	pAdapter;
-	struct reordering_list	list;
-} BA_REC_ENTRY, *PBA_REC_ENTRY;
-
-
-typedef struct {
-	ULONG		numAsRecipient;		// I am recipient of numAsRecipient clients. These client are in the BARecEntry[]
-	ULONG		numAsOriginator;	// I am originator of 	numAsOriginator clients. These clients are in the BAOriEntry[]
-	BA_ORI_ENTRY       BAOriEntry[MAX_LEN_OF_BA_ORI_TABLE];
-	BA_REC_ENTRY       BARecEntry[MAX_LEN_OF_BA_REC_TABLE];
-} BA_TABLE, *PBA_TABLE;
-
-//For QureyBATableOID use;
-typedef struct  PACKED _OID_BA_REC_ENTRY{
-	UCHAR   MACAddr[MAC_ADDR_LEN];
-	UCHAR   BaBitmap;   // if (BaBitmap&(1<<TID)), this session with{MACAddr, TID}exists, so read BufSize[TID] for BufferSize
-	UCHAR   rsv;
-	UCHAR   BufSize[8];
-	REC_BLOCKACK_STATUS	REC_BA_Status[8];
-} OID_BA_REC_ENTRY, *POID_BA_REC_ENTRY;
-
-//For QureyBATableOID use;
-typedef struct  PACKED _OID_BA_ORI_ENTRY{
-	UCHAR   MACAddr[MAC_ADDR_LEN];
-	UCHAR   BaBitmap;  // if (BaBitmap&(1<<TID)), this session with{MACAddr, TID}exists, so read BufSize[TID] for BufferSize, read ORI_BA_Status[TID] for status
-	UCHAR   rsv;
-	UCHAR   BufSize[8];
-	ORI_BLOCKACK_STATUS  ORI_BA_Status[8];
-} OID_BA_ORI_ENTRY, *POID_BA_ORI_ENTRY;
-
-typedef struct _QUERYBA_TABLE{
-	OID_BA_ORI_ENTRY       BAOriEntry[32];
-	OID_BA_REC_ENTRY       BARecEntry[32];
-	UCHAR   OriNum;// Number of below BAOriEntry
-	UCHAR   RecNum;// Number of below BARecEntry
-} QUERYBA_TABLE, *PQUERYBA_TABLE;
-
-typedef	union	_BACAP_STRUC	{
-#ifdef RT_BIG_ENDIAN
-	struct	{
-		UINT32     :4;
-		UINT32     b2040CoexistScanSup:1;		//As Sta, support do 2040 coexistence scan for AP. As Ap, support monitor trigger event to check if can use BW 40MHz.
-		UINT32     bHtAdhoc:1;			// adhoc can use ht rate.
-		UINT32     MMPSmode:2;	// MIMO power save more, 0:static, 1:dynamic, 2:rsv, 3:mimo enable
-		UINT32     AmsduSize:1;	// 0:3839, 1:7935 bytes. UINT  MSDUSizeToBytes[]	= { 3839, 7935};
-		UINT32     AmsduEnable:1;	//Enable AMSDU transmisstion
-		UINT32		MpduDensity:3;
-		UINT32		Policy:2;	// 0: DELAY_BA 1:IMMED_BA  (//BA Policy subfiled value in ADDBA frame)   2:BA-not use
-		UINT32		AutoBA:1;	// automatically BA
-		UINT32		TxBAWinLimit:8;
-		UINT32		RxBAWinLimit:8;
-	}	field;
-#else
-	struct	{
-		UINT32		RxBAWinLimit:8;
-		UINT32		TxBAWinLimit:8;
-		UINT32		AutoBA:1;	// automatically BA
-		UINT32		Policy:2;	// 0: DELAY_BA 1:IMMED_BA  (//BA Policy subfiled value in ADDBA frame)   2:BA-not use
-		UINT32		MpduDensity:3;
-		UINT32       	AmsduEnable:1;	//Enable AMSDU transmisstion
-		UINT32       	AmsduSize:1;	// 0:3839, 1:7935 bytes. UINT  MSDUSizeToBytes[]	= { 3839, 7935};
-		UINT32       	MMPSmode:2;	// MIMO power save more, 0:static, 1:dynamic, 2:rsv, 3:mimo enable
-		UINT32       	bHtAdhoc:1;			// adhoc can use ht rate.
-		UINT32       	b2040CoexistScanSup:1;		//As Sta, support do 2040 coexistence scan for AP. As Ap, support monitor trigger event to check if can use BW 40MHz.
-		UINT32       	:4;
-	}	field;
-#endif
-	UINT32			word;
-} BACAP_STRUC, *PBACAP_STRUC;
-#endif // DOT11_N_SUPPORT //
-
-//This structure is for all 802.11n card InterOptibilityTest action. Reset all Num every n second.  (Details see MLMEPeriodic)
-typedef	struct	_IOT_STRUC	{
-	UCHAR			Threshold[2];
-	UCHAR			ReorderTimeOutNum[MAX_LEN_OF_BA_REC_TABLE];	// compare with threshold[0]
-	UCHAR			RefreshNum[MAX_LEN_OF_BA_REC_TABLE];	// compare with threshold[1]
-	ULONG			OneSecInWindowCount;
-	ULONG			OneSecFrameDuplicateCount;
-	ULONG			OneSecOutWindowCount;
-	UCHAR			DelOriAct;
-	UCHAR			DelRecAct;
-	UCHAR			RTSShortProt;
-	UCHAR			RTSLongProt;
-	BOOLEAN			bRTSLongProtOn;
-#ifdef CONFIG_STA_SUPPORT
-	BOOLEAN			bLastAtheros;
-    BOOLEAN			bCurrentAtheros;
-    BOOLEAN         bNowAtherosBurstOn;
-	BOOLEAN			bNextDisableRxBA;
-    BOOLEAN			bToggle;
-#endif // CONFIG_STA_SUPPORT //
-} IOT_STRUC, *PIOT_STRUC;
-
-// This is the registry setting for 802.11n transmit setting.  Used in advanced page.
-typedef union _REG_TRANSMIT_SETTING {
-#ifdef RT_BIG_ENDIAN
- struct {
-         UINT32  rsv:13;
-		 UINT32  EXTCHA:2;
-		 UINT32  HTMODE:1;
-		 UINT32  TRANSNO:2;
-		 UINT32  STBC:1; //SPACE
-		 UINT32  ShortGI:1;
-		 UINT32  BW:1; //channel bandwidth 20MHz or 40 MHz
-		 UINT32  TxBF:1; // 3*3
-		 UINT32  rsv0:10;
-		 //UINT32  MCS:7;                 // MCS
-         //UINT32  PhyMode:4;
-    } field;
-#else
- struct {
-         //UINT32  PhyMode:4;
-         //UINT32  MCS:7;                 // MCS
-		 UINT32  rsv0:10;
-		 UINT32  TxBF:1;
-         UINT32  BW:1; //channel bandwidth 20MHz or 40 MHz
-         UINT32  ShortGI:1;
-         UINT32  STBC:1; //SPACE
-         UINT32  TRANSNO:2;
-         UINT32  HTMODE:1;
-         UINT32  EXTCHA:2;
-         UINT32  rsv:13;
-    } field;
-#endif
- UINT32   word;
-} REG_TRANSMIT_SETTING, *PREG_TRANSMIT_SETTING;
-
-typedef union  _DESIRED_TRANSMIT_SETTING {
-#ifdef RT_BIG_ENDIAN
-	struct	{
-			USHORT		rsv:3;
-			USHORT		FixedTxMode:2;			// If MCS isn't AUTO, fix rate in CCK, OFDM or HT mode.
-			USHORT		PhyMode:4;
-			USHORT   	MCS:7;                 // MCS
-	}	field;
-#else
-	struct	{
-			USHORT   	MCS:7;                 	// MCS
-			USHORT		PhyMode:4;
-			USHORT	 	FixedTxMode:2;			// If MCS isn't AUTO, fix rate in CCK, OFDM or HT mode.
-			USHORT		rsv:3;
-	}	field;
-#endif
-	USHORT		word;
- } DESIRED_TRANSMIT_SETTING, *PDESIRED_TRANSMIT_SETTING;
-
-typedef struct {
-	BOOLEAN		IsRecipient;
-	UCHAR   MACAddr[MAC_ADDR_LEN];
-	UCHAR   TID;
-	UCHAR   nMSDU;
-	USHORT   TimeOut;
-	BOOLEAN bAllTid;  // If True, delete all TID for BA sessions with this MACaddr.
-} OID_ADD_BA_ENTRY, *POID_ADD_BA_ENTRY;
-
-//
-// Multiple SSID structure
-//
-#define WLAN_MAX_NUM_OF_TIM			((MAX_LEN_OF_MAC_TABLE >> 3) + 1) /* /8 + 1 */
-#define WLAN_CT_TIM_BCMC_OFFSET		0 /* unit: 32B */
-
-/* clear bcmc TIM bit */
-#define WLAN_MR_TIM_BCMC_CLEAR(apidx) \
-	pAd->ApCfg.MBSSID[apidx].TimBitmaps[WLAN_CT_TIM_BCMC_OFFSET] &= ~BIT8[0];
-
-/* set bcmc TIM bit */
-#define WLAN_MR_TIM_BCMC_SET(apidx) \
-	pAd->ApCfg.MBSSID[apidx].TimBitmaps[WLAN_CT_TIM_BCMC_OFFSET] |= BIT8[0];
-
-/* clear a station PS TIM bit */
-#define WLAN_MR_TIM_BIT_CLEAR(ad_p, apidx, wcid) \
-	{	UCHAR tim_offset = wcid >> 3; \
-		UCHAR bit_offset = wcid & 0x7; \
-		ad_p->ApCfg.MBSSID[apidx].TimBitmaps[tim_offset] &= (~BIT8[bit_offset]); }
-
-/* set a station PS TIM bit */
-#define WLAN_MR_TIM_BIT_SET(ad_p, apidx, wcid) \
-	{	UCHAR tim_offset = wcid >> 3; \
-		UCHAR bit_offset = wcid & 0x7; \
-		ad_p->ApCfg.MBSSID[apidx].TimBitmaps[tim_offset] |= BIT8[bit_offset]; }
-
-#ifdef RT2870
-#define BEACON_BITMAP_MASK		0xff
-typedef struct _BEACON_SYNC_STRUCT_
-{
-	UCHAR        			BeaconBuf[HW_BEACON_MAX_COUNT][HW_BEACON_OFFSET];
-	UCHAR					BeaconTxWI[HW_BEACON_MAX_COUNT][TXWI_SIZE];
-	ULONG 					TimIELocationInBeacon[HW_BEACON_MAX_COUNT];
-	ULONG					CapabilityInfoLocationInBeacon[HW_BEACON_MAX_COUNT];
-	BOOLEAN					EnableBeacon;		// trigger to enable beacon transmission.
-	UCHAR					BeaconBitMap;		// NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change.
-	UCHAR					DtimBitOn;			// NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change.
-}BEACON_SYNC_STRUCT;
-#endif // RT2870 //
-
-typedef struct _MULTISSID_STRUCT {
-	UCHAR								Bssid[MAC_ADDR_LEN];
-    UCHAR                               SsidLen;
-    CHAR                                Ssid[MAX_LEN_OF_SSID];
-    USHORT                              CapabilityInfo;
-
-    PNET_DEV                   			MSSIDDev;
-
-	NDIS_802_11_AUTHENTICATION_MODE     AuthMode;
-	NDIS_802_11_WEP_STATUS              WepStatus;
-	NDIS_802_11_WEP_STATUS				GroupKeyWepStatus;
-	WPA_MIX_PAIR_CIPHER					WpaMixPairCipher;
-
-	ULONG								TxCount;
-	ULONG								RxCount;
-	ULONG								ReceivedByteCount;
-	ULONG								TransmittedByteCount;
-	ULONG								RxErrorCount;
-	ULONG								RxDropCount;
-
-	HTTRANSMIT_SETTING					HTPhyMode, MaxHTPhyMode, MinHTPhyMode;// For transmit phy setting in TXWI.
-	RT_HT_PHY_INFO						DesiredHtPhyInfo;
-	DESIRED_TRANSMIT_SETTING        	DesiredTransmitSetting; // Desired transmit setting. this is for reading registry setting only. not useful.
-	BOOLEAN								bAutoTxRateSwitch;
-
-	//CIPHER_KEY                          SharedKey[SHARE_KEY_NUM]; // ref pAd->SharedKey[BSS][4]
-	UCHAR                               DefaultKeyId;
-
-	UCHAR								TxRate;       // RATE_1, RATE_2, RATE_5_5, RATE_11, ...
-	UCHAR     							DesiredRates[MAX_LEN_OF_SUPPORTED_RATES];// OID_802_11_DESIRED_RATES
-	UCHAR								DesiredRatesIndex;
-	UCHAR     							MaxTxRate;            // RATE_1, RATE_2, RATE_5_5, RATE_11
-
-//	ULONG           					TimBitmap;      // bit0 for broadcast, 1 for AID1, 2 for AID2, ...so on
-//    ULONG           					TimBitmap2;     // b0 for AID32, b1 for AID33, ... and so on
-	UCHAR								TimBitmaps[WLAN_MAX_NUM_OF_TIM];
-
-    // WPA
-    UCHAR                               GMK[32];
-    UCHAR                               PMK[32];
-	UCHAR								GTK[32];
-    BOOLEAN                             IEEE8021X;
-    BOOLEAN                             PreAuth;
-    UCHAR                               GNonce[32];
-    UCHAR                               PortSecured;
-    NDIS_802_11_PRIVACY_FILTER          PrivacyFilter;
-    UCHAR                               BANClass3Data;
-    ULONG                               IsolateInterStaTraffic;
-
-    UCHAR                               RSNIE_Len[2];
-    UCHAR                               RSN_IE[2][MAX_LEN_OF_RSNIE];
-
-
-    UCHAR                   			TimIELocationInBeacon;
-    UCHAR                   			CapabilityInfoLocationInBeacon;
-    // outgoing BEACON frame buffer and corresponding TXWI
-	// PTXWI_STRUC                           BeaconTxWI; //
-    CHAR                                BeaconBuf[MAX_BEACON_SIZE]; // NOTE: BeaconBuf should be 4-byte aligned
-
-    BOOLEAN                             bHideSsid;
-	UINT16								StationKeepAliveTime; // unit: second
-
-    USHORT                              VLAN_VID;
-    USHORT                              VLAN_Priority;
-
-    RT_802_11_ACL						AccessControlList;
-
-	// EDCA Qos
-    BOOLEAN								bWmmCapable;	// 0:disable WMM, 1:enable WMM
-    BOOLEAN								bDLSCapable;	// 0:disable DLS, 1:enable DLS
-
-	UCHAR           					DlsPTK[64];		// Due to windows dirver count on meetinghouse to handle 4-way shake
-
-	// For 802.1x daemon setting per BSS
-	UCHAR								radius_srv_num;
-	RADIUS_SRV_INFO						radius_srv_info[MAX_RADIUS_SRV_NUM];
-
-#ifdef RTL865X_SOC
-	unsigned int						mylinkid;
-#endif
-
-
-	UINT32					RcvdConflictSsidCount;
-	UINT32					RcvdSpoofedAssocRespCount;
-	UINT32					RcvdSpoofedReassocRespCount;
-	UINT32					RcvdSpoofedProbeRespCount;
-	UINT32					RcvdSpoofedBeaconCount;
-	UINT32					RcvdSpoofedDisassocCount;
-	UINT32					RcvdSpoofedAuthCount;
-	UINT32					RcvdSpoofedDeauthCount;
-	UINT32					RcvdSpoofedUnknownMgmtCount;
-	UINT32					RcvdReplayAttackCount;
-
-	CHAR					RssiOfRcvdConflictSsid;
-	CHAR					RssiOfRcvdSpoofedAssocResp;
-	CHAR					RssiOfRcvdSpoofedReassocResp;
-	CHAR					RssiOfRcvdSpoofedProbeResp;
-	CHAR					RssiOfRcvdSpoofedBeacon;
-	CHAR					RssiOfRcvdSpoofedDisassoc;
-	CHAR					RssiOfRcvdSpoofedAuth;
-	CHAR					RssiOfRcvdSpoofedDeauth;
-	CHAR					RssiOfRcvdSpoofedUnknownMgmt;
-	CHAR					RssiOfRcvdReplayAttack;
-
-	BOOLEAN					bBcnSntReq;
-	UCHAR					BcnBufIdx;
-} MULTISSID_STRUCT, *PMULTISSID_STRUCT;
-
-
-
-#ifdef DOT11N_DRAFT3
-typedef enum _BSS2040COEXIST_FLAG{
-	BSS_2040_COEXIST_DISABLE = 0,
-	BSS_2040_COEXIST_TIMER_FIRED  = 1,
-	BSS_2040_COEXIST_INFO_SYNC = 2,
-	BSS_2040_COEXIST_INFO_NOTIFY = 4,
-}BSS2040COEXIST_FLAG;
-#endif // DOT11N_DRAFT3 //
-
-// configuration common to OPMODE_AP as well as OPMODE_STA
-typedef struct _COMMON_CONFIG {
-
-	BOOLEAN		bCountryFlag;
-	UCHAR		CountryCode[3];
-	UCHAR		Geography;
-	UCHAR       CountryRegion;      // Enum of country region, 0:FCC, 1:IC, 2:ETSI, 3:SPAIN, 4:France, 5:MKK, 6:MKK1, 7:Israel
-	UCHAR       CountryRegionForABand;	// Enum of country region for A band
-	UCHAR       PhyMode;            // PHY_11A, PHY_11B, PHY_11BG_MIXED, PHY_ABG_MIXED
-	USHORT      Dsifs;              // in units of usec
-	ULONG       PacketFilter;       // Packet filter for receiving
-
-	CHAR        Ssid[MAX_LEN_OF_SSID]; // NOT NULL-terminated
-	UCHAR       SsidLen;               // the actual ssid length in used
-	UCHAR       LastSsidLen;               // the actual ssid length in used
-	CHAR        LastSsid[MAX_LEN_OF_SSID]; // NOT NULL-terminated
-	UCHAR		LastBssid[MAC_ADDR_LEN];
-
-	UCHAR       Bssid[MAC_ADDR_LEN];
-	USHORT      BeaconPeriod;
-	UCHAR       Channel;
-	UCHAR       CentralChannel;    	// Central Channel when using 40MHz is indicating. not real channel.
-
-#if 0	// move to STA_ADMIN_CONFIG
-	UCHAR       DefaultKeyId;
-
-	NDIS_802_11_PRIVACY_FILTER          PrivacyFilter;  // PrivacyFilter enum for 802.1X
-	NDIS_802_11_AUTHENTICATION_MODE     AuthMode;       // This should match to whatever microsoft defined
-	NDIS_802_11_WEP_STATUS              WepStatus;
-	NDIS_802_11_WEP_STATUS				OrigWepStatus;	// Original wep status set from OID
-
-	// Add to support different cipher suite for WPA2/WPA mode
-	NDIS_802_11_ENCRYPTION_STATUS		GroupCipher;		// Multicast cipher suite
-	NDIS_802_11_ENCRYPTION_STATUS		PairCipher;			// Unicast cipher suite
-	BOOLEAN								bMixCipher;			// Indicate current Pair & Group use different cipher suites
-	USHORT								RsnCapability;
-
-	NDIS_802_11_WEP_STATUS              GroupKeyWepStatus;
-#endif
-
-	UCHAR       SupRate[MAX_LEN_OF_SUPPORTED_RATES];
-	UCHAR       SupRateLen;
-	UCHAR       ExtRate[MAX_LEN_OF_SUPPORTED_RATES];
-	UCHAR       ExtRateLen;
-	UCHAR       DesireRate[MAX_LEN_OF_SUPPORTED_RATES];      // OID_802_11_DESIRED_RATES
-	UCHAR       MaxDesiredRate;
-	UCHAR       ExpectedACKRate[MAX_LEN_OF_SUPPORTED_RATES];
-
-	ULONG       BasicRateBitmap;        // backup basic ratebitmap
-
-	BOOLEAN		bAPSDCapable;
-	BOOLEAN		bInServicePeriod;
-	BOOLEAN		bAPSDAC_BE;
-	BOOLEAN		bAPSDAC_BK;
-	BOOLEAN		bAPSDAC_VI;
-	BOOLEAN		bAPSDAC_VO;
-	BOOLEAN		bNeedSendTriggerFrame;
-	BOOLEAN		bAPSDForcePowerSave;	// Force power save mode, should only use in APSD-STAUT
-	ULONG		TriggerTimerCount;
-	UCHAR		MaxSPLength;
-	UCHAR		BBPCurrentBW;	// BW_10, 	BW_20, BW_40
-	// move to MULTISSID_STRUCT for MBSS
-	//HTTRANSMIT_SETTING	HTPhyMode, MaxHTPhyMode, MinHTPhyMode;// For transmit phy setting in TXWI.
-	REG_TRANSMIT_SETTING        RegTransmitSetting; //registry transmit setting. this is for reading registry setting only. not useful.
-	//UCHAR       FixedTxMode;              // Fixed Tx Mode (CCK, OFDM), for HT fixed tx mode (GF, MIX) , refer to RegTransmitSetting.field.HTMode
-	UCHAR       TxRate;                 // Same value to fill in TXD. TxRate is 6-bit
-	UCHAR       MaxTxRate;              // RATE_1, RATE_2, RATE_5_5, RATE_11
-	UCHAR       TxRateIndex;            // Tx rate index in RateSwitchTable
-	UCHAR       TxRateTableSize;        // Valid Tx rate table size in RateSwitchTable
-	//BOOLEAN		bAutoTxRateSwitch;
-	UCHAR       MinTxRate;              // RATE_1, RATE_2, RATE_5_5, RATE_11
-	UCHAR       RtsRate;                // RATE_xxx
-	HTTRANSMIT_SETTING	MlmeTransmit;   // MGMT frame PHY rate setting when operatin at Ht rate.
-	UCHAR       MlmeRate;               // RATE_xxx, used to send MLME frames
-	UCHAR       BasicMlmeRate;          // Default Rate for sending MLME frames
-
-	USHORT      RtsThreshold;           // in unit of BYTE
-	USHORT      FragmentThreshold;      // in unit of BYTE
-
-	UCHAR       TxPower;                // in unit of mW
-	ULONG       TxPowerPercentage;      // 0~100 %
-	ULONG       TxPowerDefault;         // keep for TxPowerPercentage
-
-#ifdef DOT11_N_SUPPORT
-	BACAP_STRUC        BACapability; //   NO USE = 0XFF  ;  IMMED_BA =1  ;  DELAY_BA=0
-	BACAP_STRUC        REGBACapability; //   NO USE = 0XFF  ;  IMMED_BA =1  ;  DELAY_BA=0
-#endif // DOT11_N_SUPPORT //
-	IOT_STRUC		IOTestParm;	// 802.11n InterOpbility Test Parameter;
-	ULONG       TxPreamble;             // Rt802_11PreambleLong, Rt802_11PreambleShort, Rt802_11PreambleAuto
-	BOOLEAN     bUseZeroToDisableFragment;     // Microsoft use 0 as disable
-	ULONG       UseBGProtection;        // 0: auto, 1: always use, 2: always not use
-	BOOLEAN     bUseShortSlotTime;      // 0: disable, 1 - use short slot (9us)
-	BOOLEAN     bEnableTxBurst;         // 1: enble TX PACKET BURST, 0: disable TX PACKET BURST
-	BOOLEAN     bAggregationCapable;      // 1: enable TX aggregation when the peer supports it
-	BOOLEAN     bPiggyBackCapable;		// 1: enable TX piggy-back according MAC's version
-	BOOLEAN     bIEEE80211H;			// 1: enable IEEE802.11h spec.
-	ULONG		DisableOLBCDetect;		// 0: enable OLBC detect; 1 disable OLBC detect
-
-#ifdef DOT11_N_SUPPORT
-	BOOLEAN				bRdg;
-#endif // DOT11_N_SUPPORT //
-	BOOLEAN             bWmmCapable;        // 0:disable WMM, 1:enable WMM
-	QOS_CAPABILITY_PARM APQosCapability;    // QOS capability of the current associated AP
-	EDCA_PARM           APEdcaParm;         // EDCA parameters of the current associated AP
-	QBSS_LOAD_PARM      APQbssLoad;         // QBSS load of the current associated AP
-	UCHAR               AckPolicy[4];       // ACK policy of the specified AC. see ACK_xxx
-#ifdef CONFIG_STA_SUPPORT
-	BOOLEAN				bDLSCapable;		// 0:disable DLS, 1:enable DLS
-#endif // CONFIG_STA_SUPPORT //
-	// a bitmap of BOOLEAN flags. each bit represent an operation status of a particular
-	// BOOLEAN control, either ON or OFF. These flags should always be accessed via
-	// OPSTATUS_TEST_FLAG(), OPSTATUS_SET_FLAG(), OP_STATUS_CLEAR_FLAG() macros.
-	// see fOP_STATUS_xxx in RTMP_DEF.C for detail bit definition
-	ULONG               OpStatusFlags;
-
-	BOOLEAN				NdisRadioStateOff; //For HCT 12.0, set this flag to TRUE instead of called MlmeRadioOff.
-	ABGBAND_STATE		BandState;		// For setting BBP used on B/G or A mode.
-
-	// IEEE802.11H--DFS.
-	RADAR_DETECT_STRUCT	RadarDetect;
-
-#ifdef CARRIER_DETECTION_SUPPORT
-	CARRIER_DETECTION		CarrierDetect;
-#endif // CARRIER_DETECTION_SUPPORT //
-
-#ifdef DOT11_N_SUPPORT
-	// HT
-	UCHAR			BASize;		// USer desired BAWindowSize. Should not exceed our max capability
-	//RT_HT_CAPABILITY	SupportedHtPhy;
-	RT_HT_CAPABILITY	DesiredHtPhy;
-	HT_CAPABILITY_IE		HtCapability;
-	ADD_HT_INFO_IE		AddHTInfo;	// Useful as AP.
-	//This IE is used with channel switch announcement element when changing to a new 40MHz.
-	//This IE is included in channel switch ammouncement frames 7.4.1.5, beacons, probe Rsp.
-	NEW_EXT_CHAN_IE	NewExtChanOffset;	//7.3.2.20A, 1 if extension channel is above the control channel, 3 if below, 0 if not present
-
-#ifdef DOT11N_DRAFT3
-	UCHAR					Bss2040CoexistFlag;		// bit 0: bBssCoexistTimerRunning, bit 1: NeedSyncAddHtInfo.
-	RALINK_TIMER_STRUCT	Bss2040CoexistTimer;
-
-	//This IE is used for 20/40 BSS Coexistence.
-	BSS_2040_COEXIST_IE		BSS2040CoexistInfo;
-	// ====== 11n D3.0 =======================>
-	USHORT					Dot11OBssScanPassiveDwell;				// Unit : TU. 5~1000
-	USHORT					Dot11OBssScanActiveDwell;				// Unit : TU. 10~1000
-	USHORT					Dot11BssWidthTriggerScanInt;			// Unit : Second
-	USHORT					Dot11OBssScanPassiveTotalPerChannel;	// Unit : TU. 200~10000
-	USHORT					Dot11OBssScanActiveTotalPerChannel;	// Unit : TU. 20~10000
-	USHORT					Dot11BssWidthChanTranDelayFactor;
-	USHORT					Dot11OBssScanActivityThre;				// Unit : percentage
-
-	ULONG					Dot11BssWidthChanTranDelay;			// multiple of (Dot11BssWidthTriggerScanInt * Dot11BssWidthChanTranDelayFactor)
-	ULONG					CountDownCtr;	// CountDown Counter from (Dot11BssWidthTriggerScanInt * Dot11BssWidthChanTranDelayFactor)
-
-	NDIS_SPIN_LOCK          TriggerEventTabLock;
-	BSS_2040_COEXIST_IE		LastBSSCoexist2040;
-	BSS_2040_COEXIST_IE		BSSCoexist2040;
-	TRIGGER_EVENT_TAB		TriggerEventTab;
-	UCHAR					ChannelListIdx;
-	// <====== 11n D3.0 =======================
-	BOOLEAN					bOverlapScanning;
-#endif // DOT11N_DRAFT3 //
-
-    BOOLEAN                 bHTProtect;
-    BOOLEAN                 bMIMOPSEnable;
-    BOOLEAN					bBADecline;
-	BOOLEAN					bDisableReordering;
-	BOOLEAN					bForty_Mhz_Intolerant;
-	BOOLEAN					bExtChannelSwitchAnnouncement;
-	BOOLEAN					bRcvBSSWidthTriggerEvents;
-	ULONG					LastRcvBSSWidthTriggerEventsTime;
-
-	UCHAR					TxBASize;
-#endif // DOT11_N_SUPPORT //
-
-	// Enable wireless event
-	BOOLEAN				bWirelessEvent;
-	BOOLEAN				bWiFiTest;				// Enable this parameter for WiFi test
-
-	// Tx & Rx Stream number selection
-	UCHAR				TxStream;
-	UCHAR				RxStream;
-
-	// transmit phy mode, trasmit rate for Multicast.
-#ifdef MCAST_RATE_SPECIFIC
-	UCHAR				McastTransmitMcs;
-	UCHAR				McastTransmitPhyMode;
-#endif // MCAST_RATE_SPECIFIC //
-
-	BOOLEAN     		bHardwareRadio;     // Hardware controlled Radio enabled
-
-#ifdef RT2870
-	BOOLEAN     		bMultipleIRP;       // Multiple Bulk IN flag
-	UCHAR       		NumOfBulkInIRP;     // if bMultipleIRP == TRUE, NumOfBulkInIRP will be 4 otherwise be 1
- 	RT_HT_CAPABILITY	SupportedHtPhy;
-	ULONG				MaxPktOneTxBulk;
-	UCHAR				TxBulkFactor;
-	UCHAR				RxBulkFactor;
-
-	BEACON_SYNC_STRUCT	*pBeaconSync;
-	RALINK_TIMER_STRUCT	BeaconUpdateTimer;
-	UINT32				BeaconAdjust;
-	UINT32				BeaconFactor;
-	UINT32				BeaconRemain;
-#endif // RT2870 //
-
-
- 	NDIS_SPIN_LOCK			MeasureReqTabLock;
-	PMEASURE_REQ_TAB		pMeasureReqTab;
-
-	NDIS_SPIN_LOCK			TpcReqTabLock;
-	PTPC_REQ_TAB			pTpcReqTab;
-
-	// transmit phy mode, trasmit rate for Multicast.
-#ifdef MCAST_RATE_SPECIFIC
-	HTTRANSMIT_SETTING		MCastPhyMode;
-#endif // MCAST_RATE_SPECIFIC //
-
-#ifdef SINGLE_SKU
-	UINT16					DefineMaxTxPwr;
-#endif // SINGLE_SKU //
-
-
-} COMMON_CONFIG, *PCOMMON_CONFIG;
-
-
-#ifdef CONFIG_STA_SUPPORT
-/* Modified by Wu Xi-Kun 4/21/2006 */
-// STA configuration and status
-typedef struct _STA_ADMIN_CONFIG {
-	// GROUP 1 -
-	//   User configuration loaded from Registry, E2PROM or OID_xxx. These settings describe
-	//   the user intended configuration, but not necessary fully equal to the final
-	//   settings in ACTIVE BSS after negotiation/compromize with the BSS holder (either
-	//   AP or IBSS holder).
-	//   Once initialized, user configuration can only be changed via OID_xxx
-	UCHAR       BssType;              // BSS_INFRA or BSS_ADHOC
-	USHORT      AtimWin;          // used when starting a new IBSS
-
-	// GROUP 2 -
-	//   User configuration loaded from Registry, E2PROM or OID_xxx. These settings describe
-	//   the user intended configuration, and should be always applied to the final
-	//   settings in ACTIVE BSS without compromising with the BSS holder.
-	//   Once initialized, user configuration can only be changed via OID_xxx
-	UCHAR       RssiTrigger;
-	UCHAR       RssiTriggerMode;      // RSSI_TRIGGERED_UPON_BELOW_THRESHOLD or RSSI_TRIGGERED_UPON_EXCCEED_THRESHOLD
-	USHORT      DefaultListenCount;   // default listen count;
-	ULONG       WindowsPowerMode;           // Power mode for AC power
-	ULONG       WindowsBatteryPowerMode;    // Power mode for battery if exists
-	BOOLEAN     bWindowsACCAMEnable;        // Enable CAM power mode when AC on
-	BOOLEAN     bAutoReconnect;         // Set to TRUE when setting OID_802_11_SSID with no matching BSSID
-	ULONG       WindowsPowerProfile;    // Windows power profile, for NDIS5.1 PnP
-
-	// MIB:ieee802dot11.dot11smt(1).dot11StationConfigTable(1)
-	USHORT      Psm;                  // power management mode   (PWR_ACTIVE|PWR_SAVE)
-	USHORT      DisassocReason;
-	UCHAR       DisassocSta[MAC_ADDR_LEN];
-	USHORT      DeauthReason;
-	UCHAR       DeauthSta[MAC_ADDR_LEN];
-	USHORT      AuthFailReason;
-	UCHAR       AuthFailSta[MAC_ADDR_LEN];
-
-	NDIS_802_11_PRIVACY_FILTER          PrivacyFilter;  // PrivacyFilter enum for 802.1X
-	NDIS_802_11_AUTHENTICATION_MODE     AuthMode;       // This should match to whatever microsoft defined
-	NDIS_802_11_WEP_STATUS              WepStatus;
-	NDIS_802_11_WEP_STATUS				OrigWepStatus;	// Original wep status set from OID
-
-	// Add to support different cipher suite for WPA2/WPA mode
-	NDIS_802_11_ENCRYPTION_STATUS		GroupCipher;		// Multicast cipher suite
-	NDIS_802_11_ENCRYPTION_STATUS		PairCipher;			// Unicast cipher suite
-	BOOLEAN								bMixCipher;			// Indicate current Pair & Group use different cipher suites
-	USHORT								RsnCapability;
-
-	NDIS_802_11_WEP_STATUS              GroupKeyWepStatus;
-
-	UCHAR		PMK[32];                // WPA PSK mode PMK
-	UCHAR       PTK[64];                // WPA PSK mode PTK
-	UCHAR		GTK[32];				// GTK from authenticator
-	BSSID_INFO	SavedPMK[PMKID_NO];
-	UINT		SavedPMKNum;			// Saved PMKID number
-
-	UCHAR		DefaultKeyId;
-
-
-	// WPA 802.1x port control, WPA_802_1X_PORT_SECURED, WPA_802_1X_PORT_NOT_SECURED
-	UCHAR       PortSecured;
-
-	// For WPA countermeasures
-	ULONG       LastMicErrorTime;   // record last MIC error time
-	ULONG       MicErrCnt;          // Should be 0, 1, 2, then reset to zero (after disassoiciation).
-	BOOLEAN     bBlockAssoc;        // Block associate attempt for 60 seconds after counter measure occurred.
-	// For WPA-PSK supplicant state
-	WPA_STATE   WpaState;           // Default is SS_NOTUSE and handled by microsoft 802.1x
-	UCHAR       ReplayCounter[8];
-	UCHAR       ANonce[32];         // ANonce for WPA-PSK from aurhenticator
-	UCHAR       SNonce[32];         // SNonce for WPA-PSK
-
-	UCHAR       LastSNR0;             // last received BEACON's SNR
-	UCHAR       LastSNR1;            // last received BEACON's SNR for 2nd  antenna
-	RSSI_SAMPLE RssiSample;
-	ULONG       NumOfAvgRssiSample;
-
-	ULONG       LastBeaconRxTime;     // OS's timestamp of the last BEACON RX time
-	ULONG       Last11bBeaconRxTime;  // OS's timestamp of the last 11B BEACON RX time
-	ULONG		Last11gBeaconRxTime;	// OS's timestamp of the last 11G BEACON RX time
-	ULONG		Last20NBeaconRxTime;	// OS's timestamp of the last 20MHz N BEACON RX time
-
-	ULONG       LastScanTime;       // Record last scan time for issue BSSID_SCAN_LIST
-	ULONG       ScanCnt;            // Scan counts since most recent SSID, BSSID, SCAN OID request
-	BOOLEAN     bSwRadio;           // Software controlled Radio On/Off, TRUE: On
-	BOOLEAN     bHwRadio;           // Hardware controlled Radio On/Off, TRUE: On
-	BOOLEAN     bRadio;             // Radio state, And of Sw & Hw radio state
-	BOOLEAN     bHardwareRadio;     // Hardware controlled Radio enabled
-	BOOLEAN     bShowHiddenSSID;    // Show all known SSID in SSID list get operation
-
-
-	// New for WPA, windows want us to to keep association information and
-	// Fixed IEs from last association response
-	NDIS_802_11_ASSOCIATION_INFORMATION     AssocInfo;
-	USHORT       ReqVarIELen;                // Length of next VIE include EID & Length
-	UCHAR       ReqVarIEs[MAX_VIE_LEN];		// The content saved here should be little-endian format.
-	USHORT       ResVarIELen;                // Length of next VIE include EID & Length
-	UCHAR       ResVarIEs[MAX_VIE_LEN];
-
-	UCHAR       RSNIE_Len;
-	UCHAR       RSN_IE[MAX_LEN_OF_RSNIE];	// The content saved here should be little-endian format.
-
-	// New variables used for CCX 1.0
-	BOOLEAN             bCkipOn;
-	BOOLEAN             bCkipCmicOn;
-	UCHAR               CkipFlag;
-	UCHAR               GIV[3];  //for CCX iv
-	UCHAR               RxSEQ[4];
-	UCHAR               TxSEQ[4];
-	UCHAR               CKIPMIC[4];
-	UCHAR               LeapAuthMode;
-	LEAP_AUTH_INFO      LeapAuthInfo;
-	UCHAR               HashPwd[16];
-	UCHAR               NetworkChallenge[8];
-	UCHAR               NetworkChallengeResponse[24];
-	UCHAR               PeerChallenge[8];
-
-	UCHAR               PeerChallengeResponse[24];
-	UCHAR               SessionKey[16]; //Network session keys (NSK)
-	RALINK_TIMER_STRUCT LeapAuthTimer;
-	ROGUEAP_TABLE       RogueApTab;   //Cisco CCX1 Rogue AP Detection
-
-	// New control flags for CCX
-	CCX_CONTROL         CCXControl;                 // Master administration state
-	BOOLEAN             CCXEnable;                  // Actual CCX state
-	UCHAR               CCXScanChannel;             // Selected channel for CCX beacon request
-	USHORT              CCXScanTime;                // Time out to wait for beacon and probe response
-	UCHAR               CCXReqType;                 // Current processing CCX request type
-	BSS_TABLE           CCXBssTab;                  // BSS Table
-	UCHAR               FrameReportBuf[2048];       // Buffer for creating frame report
-	USHORT              FrameReportLen;             // Current Frame report length
-	ULONG               CLBusyBytes;                // Save the total bytes received durning channel load scan time
-	USHORT              RPIDensity[8];              // Array for RPI density collection
-	// Start address of each BSS table within FrameReportBuf
-	// It's important to update the RxPower of the corresponding Bss
-	USHORT              BssReportOffset[MAX_LEN_OF_BSS_TABLE];
-	USHORT              BeaconToken;                // Token for beacon report
-	ULONG               LastBssIndex;               // Most current reported Bss index
-	RM_REQUEST_ACTION   MeasurementRequest[16];     // Saved measurement request
-	UCHAR               RMReqCnt;                   // Number of measurement request saved.
-	UCHAR               CurrentRMReqIdx;            // Number of measurement request saved.
-	BOOLEAN             ParallelReq;                // Parallel measurement, only one request performed,
-													// It must be the same channel with maximum duration
-	USHORT              ParallelDuration;           // Maximum duration for parallel measurement
-	UCHAR               ParallelChannel;            // Only one channel with parallel measurement
-	USHORT              IAPPToken;                  // IAPP dialog token
-	UCHAR               CCXQosECWMin;               // Cisco QOS ECWMin for AC 0
-	UCHAR               CCXQosECWMax;               // Cisco QOS ECWMax for AC 0
-	// Hack for channel load and noise histogram parameters
-	UCHAR               NHFactor;                   // Parameter for Noise histogram
-	UCHAR               CLFactor;                   // Parameter for channel load
-
-	UCHAR               KRK[16];        //Key Refresh Key.
-	UCHAR               BTK[32];        //Base Transient Key
-	BOOLEAN             CCKMLinkUpFlag;
-	ULONG               CCKMRN;    //(Re)Association request number.
-	LARGE_INTEGER       CCKMBeaconAtJoinTimeStamp;  //TSF timer for Re-assocaite to the new AP
-	UCHAR               AironetCellPowerLimit;      //in dBm
-	UCHAR               AironetIPAddress[4];        //eg. 192.168.1.1
-	BOOLEAN             CCXAdjacentAPReportFlag;    //flag for determining report Assoc Lost time
-	CHAR                CCXAdjacentAPSsid[MAX_LEN_OF_SSID]; //Adjacent AP's SSID report
-	UCHAR               CCXAdjacentAPSsidLen;               // the actual ssid length in used
-	UCHAR               CCXAdjacentAPBssid[MAC_ADDR_LEN];         //Adjacent AP's BSSID report
-	USHORT              CCXAdjacentAPChannel;
-	ULONG               CCXAdjacentAPLinkDownTime;  //for Spec S32.
-
-	RALINK_TIMER_STRUCT	StaQuickResponeForRateUpTimer;
-	BOOLEAN				StaQuickResponeForRateUpTimerRunning;
-
-	UCHAR           	DtimCount;      // 0.. DtimPeriod-1
-	UCHAR           	DtimPeriod;     // default = 3
-
-#ifdef QOS_DLS_SUPPORT
-	RT_802_11_DLS		DLSEntry[MAX_NUM_OF_DLS_ENTRY];
-	UCHAR				DlsReplayCounter[8];
-#endif // QOS_DLS_SUPPORT //
-	////////////////////////////////////////////////////////////////////////////////////////
-	// This is only for WHQL test.
-	BOOLEAN				WhqlTest;
-	////////////////////////////////////////////////////////////////////////////////////////
-
-    RALINK_TIMER_STRUCT WpaDisassocAndBlockAssocTimer;
-    // Fast Roaming
-	BOOLEAN		        bFastRoaming;       // 0:disable fast roaming, 1:enable fast roaming
-	CHAR		        dBmToRoam;          // the condition to roam when receiving Rssi less than this value. It's negative value.
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-    BOOLEAN             IEEE8021X;
-    BOOLEAN             IEEE8021x_required_keys;
-    CIPHER_KEY	        DesireSharedKey[4];	// Record user desired WEP keys
-    UCHAR               DesireSharedKeyId;
-
-    // 0: driver ignores wpa_supplicant
-    // 1: wpa_supplicant initiates scanning and AP selection
-    // 2: driver takes care of scanning, AP selection, and IEEE 802.11 association parameters
-    UCHAR               WpaSupplicantUP;
-	UCHAR				WpaSupplicantScanCount;
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-    CHAR                dev_name[16];
-    USHORT              OriDevType;
-
-    BOOLEAN             bTGnWifiTest;
-	BOOLEAN			    bScanReqIsFromWebUI;
-
-	HTTRANSMIT_SETTING				HTPhyMode, MaxHTPhyMode, MinHTPhyMode;// For transmit phy setting in TXWI.
-	DESIRED_TRANSMIT_SETTING       	DesiredTransmitSetting;
-	RT_HT_PHY_INFO					DesiredHtPhyInfo;
-	BOOLEAN							bAutoTxRateSwitch;
-
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-	UCHAR				IEEE80211dClientMode;
-	UCHAR				StaOriCountryCode[3];
-	UCHAR				StaOriGeography;
-#endif // EXT_BUILD_CHANNEL_LIST //
-} STA_ADMIN_CONFIG, *PSTA_ADMIN_CONFIG;
-
-// This data structure keep the current active BSS/IBSS's configuration that this STA
-// had agreed upon joining the network. Which means these parameters are usually decided
-// by the BSS/IBSS creator instead of user configuration. Data in this data structurre
-// is valid only when either ADHOC_ON(pAd) or INFRA_ON(pAd) is TRUE.
-// Normally, after SCAN or failed roaming attempts, we need to recover back to
-// the current active settings.
-typedef struct _STA_ACTIVE_CONFIG {
-	USHORT      Aid;
-	USHORT      AtimWin;                // in kusec; IBSS parameter set element
-	USHORT      CapabilityInfo;
-	USHORT      CfpMaxDuration;
-	USHORT      CfpPeriod;
-
-	// Copy supported rate from desired AP's beacon. We are trying to match
-	// AP's supported and extended rate settings.
-	UCHAR       SupRate[MAX_LEN_OF_SUPPORTED_RATES];
-	UCHAR       ExtRate[MAX_LEN_OF_SUPPORTED_RATES];
-	UCHAR       SupRateLen;
-	UCHAR       ExtRateLen;
-	// Copy supported ht from desired AP's beacon. We are trying to match
-	RT_HT_PHY_INFO		SupportedPhyInfo;
-	RT_HT_CAPABILITY	SupportedHtPhy;
-} STA_ACTIVE_CONFIG, *PSTA_ACTIVE_CONFIG;
-
-#ifdef RT2870
-// for USB interface, avoid in interrupt when write key
-typedef struct   RT_ADD_PAIRWISE_KEY_ENTRY {
-        NDIS_802_11_MAC_ADDRESS         MacAddr;
-        USHORT                          MacTabMatchWCID;        // ASIC
-        CIPHER_KEY                      CipherKey;
-} RT_ADD_PAIRWISE_KEY_ENTRY,*PRT_ADD_PAIRWISE_KEY_ENTRY;
-#endif // RT2870 //
-#endif // CONFIG_STA_SUPPORT //
-
-// ----------- start of AP --------------------------
-// AUTH-RSP State Machine Aux data structure
-typedef struct _AP_MLME_AUX {
-	UCHAR               Addr[MAC_ADDR_LEN];
-	USHORT              Alg;
-	CHAR                Challenge[CIPHER_TEXT_LEN];
-} AP_MLME_AUX, *PAP_MLME_AUX;
-
-// structure to define WPA Group Key Rekey Interval
-typedef struct PACKED _RT_802_11_WPA_REKEY {
-	ULONG ReKeyMethod;          // mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based
-	ULONG ReKeyInterval;        // time-based: seconds, packet-based: kilo-packets
-} RT_WPA_REKEY,*PRT_WPA_REKEY, RT_802_11_WPA_REKEY, *PRT_802_11_WPA_REKEY;
-
-typedef struct _MAC_TABLE_ENTRY {
-	//Choose 1 from ValidAsWDS and ValidAsCLI  to validize.
-	BOOLEAN		ValidAsCLI;		// Sta mode, set this TRUE after Linkup,too.
-	BOOLEAN		ValidAsWDS;	// This is WDS Entry. only for AP mode.
-	BOOLEAN		ValidAsApCli;   //This is a AP-Client entry, only for AP mode which enable AP-Client functions.
-	BOOLEAN		ValidAsMesh;
-	BOOLEAN		ValidAsDls;	// This is DLS Entry. only for STA mode.
-	BOOLEAN		isCached;
-	BOOLEAN		bIAmBadAtheros;	// Flag if this is Atheros chip that has IOT problem.  We need to turn on RTS/CTS protection.
-
-	UCHAR         	EnqueueEapolStartTimerRunning;  // Enqueue EAPoL-Start for triggering EAP SM
-	//jan for wpa
-	// record which entry revoke MIC Failure , if it leaves the BSS itself, AP won't update aMICFailTime MIB
-	UCHAR           CMTimerRunning;
-	UCHAR           apidx;			// MBSS number
-	UCHAR           RSNIE_Len;
-	UCHAR           RSN_IE[MAX_LEN_OF_RSNIE];
-	UCHAR           ANonce[LEN_KEY_DESC_NONCE];
-	UCHAR           R_Counter[LEN_KEY_DESC_REPLAY];
-	UCHAR           PTK[64];
-	UCHAR           ReTryCounter;
-	RALINK_TIMER_STRUCT                 RetryTimer;
-	RALINK_TIMER_STRUCT					EnqueueStartForPSKTimer;	// A timer which enqueue EAPoL-Start for triggering PSK SM
-	NDIS_802_11_AUTHENTICATION_MODE     AuthMode;   // This should match to whatever microsoft defined
-	NDIS_802_11_WEP_STATUS              WepStatus;
-	AP_WPA_STATE    WpaState;
-	GTK_STATE       GTKState;
-	USHORT          PortSecured;
-	NDIS_802_11_PRIVACY_FILTER  PrivacyFilter;      // PrivacyFilter enum for 802.1X
-	CIPHER_KEY      PairwiseKey;
-	PVOID           pAd;
-    INT				PMKID_CacheIdx;
-    UCHAR			PMKID[LEN_PMKID];
-
-
-	UCHAR           Addr[MAC_ADDR_LEN];
-	UCHAR           PsMode;
-	SST             Sst;
-	AUTH_STATE      AuthState; // for SHARED KEY authentication state machine used only
-	BOOLEAN			IsReassocSta;	// Indicate whether this is a reassociation procedure
-	USHORT          Aid;
-	USHORT          CapabilityInfo;
-	UCHAR           LastRssi;
-	ULONG           NoDataIdleCount;
-	UINT16			StationKeepAliveCount; // unit: second
-	ULONG           PsQIdleCount;
-	QUEUE_HEADER    PsQueue;
-
-	UINT32			StaConnectTime;		// the live time of this station since associated with AP
-
-
-#ifdef DOT11_N_SUPPORT
-	BOOLEAN			bSendBAR;
-	USHORT			NoBADataCountDown;
-
-	UINT32   		CachedBuf[16];		// UINT (4 bytes) for alignment
-	UINT			TxBFCount; // 3*3
-#endif // DOT11_N_SUPPORT //
-	UINT			FIFOCount;
-	UINT			DebugFIFOCount;
-	UINT			DebugTxCount;
-    BOOLEAN			bDlsInit;
-
-
-//====================================================
-//WDS entry needs these
-// rt2860 add this. if ValidAsWDS==TRUE, MatchWDSTabIdx is the index in WdsTab.MacTab
-	UINT			MatchWDSTabIdx;
-	UCHAR           MaxSupportedRate;
-	UCHAR           CurrTxRate;
-	UCHAR           CurrTxRateIndex;
-	// to record the each TX rate's quality. 0 is best, the bigger the worse.
-	USHORT          TxQuality[MAX_STEP_OF_TX_RATE_SWITCH];
-//	USHORT          OneSecTxOkCount;
-	UINT32			OneSecTxNoRetryOkCount;
-	UINT32          OneSecTxRetryOkCount;
-	UINT32          OneSecTxFailCount;
-	UINT32			ContinueTxFailCnt;
-	UINT32          CurrTxRateStableTime; // # of second in current TX rate
-	UCHAR           TxRateUpPenalty;      // extra # of second penalty due to last unstable condition
-//====================================================
-
-
-
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-	UINT			MatchDlsEntryIdx; // indicate the index in pAd->StaCfg.DLSEntry
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
-	BOOLEAN         fNoisyEnvironment;
-	BOOLEAN			fLastSecAccordingRSSI;
-	UCHAR           LastSecTxRateChangeAction; // 0: no change, 1:rate UP, 2:rate down
-	CHAR			LastTimeTxRateChangeAction; //Keep last time value of LastSecTxRateChangeAction
-	ULONG			LastTxOkCount;
-	UCHAR           PER[MAX_STEP_OF_TX_RATE_SWITCH];
-
-	// a bitmap of BOOLEAN flags. each bit represent an operation status of a particular
-	// BOOLEAN control, either ON or OFF. These flags should always be accessed via
-	// CLIENT_STATUS_TEST_FLAG(), CLIENT_STATUS_SET_FLAG(), CLIENT_STATUS_CLEAR_FLAG() macros.
-	// see fOP_STATUS_xxx in RTMP_DEF.C for detail bit definition. fCLIENT_STATUS_AMSDU_INUSED
-	ULONG           ClientStatusFlags;
-
-	// TODO: Shall we move that to DOT11_N_SUPPORT???
-	HTTRANSMIT_SETTING	HTPhyMode, MaxHTPhyMode, MinHTPhyMode;// For transmit phy setting in TXWI.
-
-#ifdef DOT11_N_SUPPORT
-	// HT EWC MIMO-N used parameters
-	USHORT		RXBAbitmap;	// fill to on-chip  RXWI_BA_BITMASK in 8.1.3RX attribute entry format
-	USHORT		TXBAbitmap;	// This bitmap as originator, only keep in software used to mark AMPDU bit in TXWI
-	USHORT		TXAutoBAbitmap;
-	USHORT		BADeclineBitmap;
-	USHORT		BARecWcidArray[NUM_OF_TID];	// The mapping wcid of recipient session. if RXBAbitmap bit is masked
-	USHORT		BAOriWcidArray[NUM_OF_TID]; // The mapping wcid of originator session. if TXBAbitmap bit is masked
-	USHORT		BAOriSequence[NUM_OF_TID]; // The mapping wcid of originator session. if TXBAbitmap bit is masked
-
-	// 802.11n features.
-	UCHAR		MpduDensity;
-	UCHAR		MaxRAmpduFactor;
-	UCHAR		AMsduSize;
-	UCHAR		MmpsMode;	// MIMO power save more.
-
-	HT_CAPABILITY_IE		HTCapability;
-
-#ifdef DOT11N_DRAFT3
-	UCHAR		BSS2040CoexistenceMgmtSupport;
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
-
-	BOOLEAN		bAutoTxRateSwitch;
-
-	UCHAR       RateLen;
-	struct _MAC_TABLE_ENTRY *pNext;
-    USHORT      TxSeq[NUM_OF_TID];
-	USHORT		NonQosDataSeq;
-
-	RSSI_SAMPLE	RssiSample;
-
-	UINT32			TXMCSExpected[16];
-	UINT32			TXMCSSuccessful[16];
-	UINT32			TXMCSFailed[16];
-	UINT32			TXMCSAutoFallBack[16][16];
-
-#ifdef CONFIG_STA_SUPPORT
-	ULONG   		LastBeaconRxTime;
-#endif // CONFIG_STA_SUPPORT //
-} MAC_TABLE_ENTRY, *PMAC_TABLE_ENTRY;
-
-typedef struct _MAC_TABLE {
-	USHORT			Size;
-	MAC_TABLE_ENTRY *Hash[HASH_TABLE_SIZE];
-	MAC_TABLE_ENTRY Content[MAX_LEN_OF_MAC_TABLE];
-	QUEUE_HEADER    McastPsQueue;
-	ULONG           PsQIdleCount;
-	BOOLEAN         fAnyStationInPsm;
-	BOOLEAN         fAnyStationBadAtheros;	// Check if any Station is atheros 802.11n Chip.  We need to use RTS/CTS with Atheros 802,.11n chip.
-	BOOLEAN			fAnyTxOPForceDisable;	// Check if it is necessary to disable BE TxOP
-	BOOLEAN			fAllStationAsRalink; 	// Check if all stations are ralink-chipset
-#ifdef DOT11_N_SUPPORT
-	BOOLEAN         fAnyStationIsLegacy;	// Check if I use legacy rate to transmit to my BSS Station/
-	BOOLEAN         fAnyStationNonGF;		// Check if any Station can't support GF.
-	BOOLEAN         fAnyStation20Only;		// Check if any Station can't support GF.
-	BOOLEAN			fAnyStationMIMOPSDynamic; // Check if any Station is MIMO Dynamic
-	BOOLEAN         fAnyBASession;   // Check if there is BA session.  Force turn on RTS/CTS
-#endif // DOT11_N_SUPPORT //
-} MAC_TABLE, *PMAC_TABLE;
-
-#ifdef DOT11_N_SUPPORT
-#define IS_HT_STA(_pMacEntry)	\
-	(_pMacEntry->MaxHTPhyMode.field.MODE >= MODE_HTMIX)
-
-#define IS_HT_RATE(_pMacEntry)	\
-	(_pMacEntry->HTPhyMode.field.MODE >= MODE_HTMIX)
-
-#define PEER_IS_HT_RATE(_pMacEntry)	\
-	(_pMacEntry->HTPhyMode.field.MODE >= MODE_HTMIX)
-#endif // DOT11_N_SUPPORT //
-
-typedef struct _WDS_ENTRY {
-	BOOLEAN         Valid;
-	UCHAR           Addr[MAC_ADDR_LEN];
-	ULONG           NoDataIdleCount;
-	struct _WDS_ENTRY *pNext;
-} WDS_ENTRY, *PWDS_ENTRY;
-
-typedef struct  _WDS_TABLE_ENTRY {
-	USHORT			Size;
-	UCHAR           WdsAddr[MAC_ADDR_LEN];
-	WDS_ENTRY       *Hash[HASH_TABLE_SIZE];
-	WDS_ENTRY       Content[MAX_LEN_OF_MAC_TABLE];
-	UCHAR           MaxSupportedRate;
-	UCHAR           CurrTxRate;
-	USHORT          TxQuality[MAX_LEN_OF_SUPPORTED_RATES];
-	USHORT          OneSecTxOkCount;
-	USHORT          OneSecTxRetryOkCount;
-	USHORT          OneSecTxFailCount;
-	ULONG           CurrTxRateStableTime; // # of second in current TX rate
-	UCHAR           TxRateUpPenalty;      // extra # of second penalty due to last unstable condition
-} WDS_TABLE_ENTRY, *PWDS_TABLE_ENTRY;
-
-typedef struct _RT_802_11_WDS_ENTRY {
-	PNET_DEV			dev;
-	UCHAR				Valid;
-	UCHAR				PhyMode;
-	UCHAR				PeerWdsAddr[MAC_ADDR_LEN];
-	UCHAR				MacTabMatchWCID;	// ASIC
-	NDIS_802_11_WEP_STATUS  WepStatus;
-	UCHAR					KeyIdx;
-	CIPHER_KEY          	WdsKey;
-	HTTRANSMIT_SETTING				HTPhyMode, MaxHTPhyMode, MinHTPhyMode;
-	RT_HT_PHY_INFO					DesiredHtPhyInfo;
-	BOOLEAN							bAutoTxRateSwitch;
-	DESIRED_TRANSMIT_SETTING       	DesiredTransmitSetting; // Desired transmit setting.
-} RT_802_11_WDS_ENTRY, *PRT_802_11_WDS_ENTRY;
-
-typedef struct _WDS_TABLE {
-	UCHAR               Mode;
-	ULONG               Size;
-	RT_802_11_WDS_ENTRY	WdsEntry[MAX_WDS_ENTRY];
-} WDS_TABLE, *PWDS_TABLE;
-
-typedef struct _APCLI_STRUCT {
-	PNET_DEV				dev;
-#ifdef RTL865X_SOC
-	unsigned int            mylinkid;
-#endif
-	BOOLEAN                 Enable;	// Set it as 1 if the apcli interface was configured to "1"  or by iwpriv cmd "ApCliEnable"
-	BOOLEAN                 Valid;	// Set it as 1 if the apcli interface associated success to remote AP.
-	UCHAR					MacTabWCID;	//WCID value, which point to the entry of ASIC Mac table.
-	UCHAR                   SsidLen;
-	CHAR                    Ssid[MAX_LEN_OF_SSID];
-
-	UCHAR                   CfgSsidLen;
-	CHAR                    CfgSsid[MAX_LEN_OF_SSID];
-	UCHAR                   CfgApCliBssid[ETH_LENGTH_OF_ADDRESS];
-	UCHAR                   CurrentAddress[ETH_LENGTH_OF_ADDRESS];
-
-	ULONG                   ApCliRcvBeaconTime;
-
-	ULONG                   CtrlCurrState;
-	ULONG                   SyncCurrState;
-	ULONG                   AuthCurrState;
-	ULONG                   AssocCurrState;
-	ULONG					WpaPskCurrState;
-
-	USHORT                  AuthReqCnt;
-	USHORT                  AssocReqCnt;
-
-	ULONG                   ClientStatusFlags;
-	UCHAR                   MpduDensity;
-
-	NDIS_802_11_AUTHENTICATION_MODE     AuthMode;   // This should match to whatever microsoft defined
-	NDIS_802_11_WEP_STATUS              WepStatus;
-
-	// Add to support different cipher suite for WPA2/WPA mode
-	NDIS_802_11_ENCRYPTION_STATUS		GroupCipher;		// Multicast cipher suite
-	NDIS_802_11_ENCRYPTION_STATUS		PairCipher;			// Unicast cipher suite
-	BOOLEAN								bMixCipher;			// Indicate current Pair & Group use different cipher suites
-	USHORT								RsnCapability;
-
-	UCHAR		PSK[100];				// reserve PSK key material
-	UCHAR       PSKLen;
-	UCHAR       PMK[32];                // WPA PSK mode PMK
-	//UCHAR       PTK[64];                // WPA PSK mode PTK
-	UCHAR		GTK[32];				// GTK from authenticator
-
-	//CIPHER_KEY		PairwiseKey;
-	CIPHER_KEY      SharedKey[SHARE_KEY_NUM];
-	UCHAR           DefaultKeyId;
-
-	// WPA 802.1x port control, WPA_802_1X_PORT_SECURED, WPA_802_1X_PORT_NOT_SECURED
-	//UCHAR       PortSecured;
-
-	// store RSN_IE built by driver
-	UCHAR		RSN_IE[MAX_LEN_OF_RSNIE];  // The content saved here should be convert to little-endian format.
-	UCHAR		RSNIE_Len;
-
-	// For WPA countermeasures
-	ULONG       LastMicErrorTime;   // record last MIC error time
-	//ULONG       MicErrCnt;          // Should be 0, 1, 2, then reset to zero (after disassoiciation).
-	BOOLEAN                 bBlockAssoc; // Block associate attempt for 60 seconds after counter measure occurred.
-
-	// For WPA-PSK supplicant state
-	//WPA_STATE   	WpaState;           // Default is SS_NOTUSE
-	//UCHAR       	ReplayCounter[8];
-	//UCHAR       	ANonce[32];         // ANonce for WPA-PSK from authenticator
-	UCHAR       	SNonce[32];         // SNonce for WPA-PSK
-	UCHAR			GNonce[32];			// GNonce for WPA-PSK from authenticator
-
-	HTTRANSMIT_SETTING				HTPhyMode, MaxHTPhyMode, MinHTPhyMode;
-	RT_HT_PHY_INFO					DesiredHtPhyInfo;
-	BOOLEAN							bAutoTxRateSwitch;
-	DESIRED_TRANSMIT_SETTING       	DesiredTransmitSetting; // Desired transmit setting.
-} APCLI_STRUCT, *PAPCLI_STRUCT;
-
-// ----------- end of AP ----------------------------
-
-#ifdef BLOCK_NET_IF
-typedef struct _BLOCK_QUEUE_ENTRY
-{
-	BOOLEAN SwTxQueueBlockFlag;
-	LIST_HEADER NetIfList;
-} BLOCK_QUEUE_ENTRY, *PBLOCK_QUEUE_ENTRY;
-#endif // BLOCK_NET_IF //
-
-struct wificonf
-{
-	BOOLEAN	bShortGI;
-	BOOLEAN bGreenField;
-};
-
-
-
-typedef struct _INF_PCI_CONFIG
-{
-	PUCHAR                  CSRBaseAddress;     // PCI MMIO Base Address, all access will use
-}INF_PCI_CONFIG;
-
-typedef struct _INF_USB_CONFIG
-{
-	UINT                BulkInEpAddr;		// bulk-in endpoint address
-	UINT                BulkOutEpAddr[6];	// bulk-out endpoint address
-
-}INF_USB_CONFIG;
-
-#ifdef IKANOS_VX_1X0
-	typedef void (*IkanosWlanTxCbFuncP)(void *, void *);
-
-	struct IKANOS_TX_INFO
-	{
-		struct net_device *netdev;
-		IkanosWlanTxCbFuncP *fp;
-	};
-#endif // IKANOS_VX_1X0 //
-
-#ifdef NINTENDO_AP
-typedef struct _NINDO_CTRL_BLOCK {
-
-	RT_NINTENDO_TABLE	DS_TABLE;
-
-#ifdef CHIP25XX
-	spinlock_t			NINTENDO_TABLE_Lock;
-#else
-	NDIS_SPIN_LOCK		NINTENDO_TABLE_Lock;
-#endif // CHIP25XX //
-
-	UCHAR				NINTENDO_UP_BUFFER[512];
-	UCHAR				Local_KeyIdx;
-	CIPHER_KEY			Local_SharedKey;
-	UCHAR				Local_bHideSsid;
-	UCHAR				Local_AuthMode;
-	UCHAR				Local_WepStatus;
-	USHORT				Local_CapabilityInfo;
-} NINDO_CTRL_BLOCK;
-#endif // NINTENDO_AP //
-
-
-#ifdef DBG_DIAGNOSE
-#define DIAGNOSE_TIME	10   // 10 sec
-typedef struct _RtmpDiagStrcut_
-{	// Diagnosis Related element
-	unsigned char		inited;
-	unsigned char 	qIdx;
-	unsigned char 	ArrayStartIdx;
-	unsigned char		ArrayCurIdx;
-	// Tx Related Count
-	USHORT			TxDataCnt[DIAGNOSE_TIME];
-	USHORT			TxFailCnt[DIAGNOSE_TIME];
-//	USHORT			TxDescCnt[DIAGNOSE_TIME][16];		// TxDesc queue length in scale of 0~14, >=15
-	USHORT			TxDescCnt[DIAGNOSE_TIME][24]; // 3*3	// TxDesc queue length in scale of 0~14, >=15
-//	USHORT			TxMcsCnt[DIAGNOSE_TIME][16];			// TxDate MCS Count in range from 0 to 15, step in 1.
-	USHORT			TxMcsCnt[DIAGNOSE_TIME][24]; // 3*3
-	USHORT			TxSWQueCnt[DIAGNOSE_TIME][9];		// TxSwQueue length in scale of 0, 1, 2, 3, 4, 5, 6, 7, >=8
-
-	USHORT			TxAggCnt[DIAGNOSE_TIME];
-	USHORT			TxNonAggCnt[DIAGNOSE_TIME];
-//	USHORT			TxAMPDUCnt[DIAGNOSE_TIME][16];		// 10 sec, TxDMA APMDU Aggregation count in range from 0 to 15, in setp of 1.
-	USHORT			TxAMPDUCnt[DIAGNOSE_TIME][24]; // 3*3 // 10 sec, TxDMA APMDU Aggregation count in range from 0 to 15, in setp of 1.
-	USHORT			TxRalinkCnt[DIAGNOSE_TIME];			// TxRalink Aggregation Count in 1 sec scale.
-	USHORT			TxAMSDUCnt[DIAGNOSE_TIME];			// TxAMSUD Aggregation Count in 1 sec scale.
-
-	// Rx Related Count
-	USHORT			RxDataCnt[DIAGNOSE_TIME];			// Rx Total Data count.
-	USHORT			RxCrcErrCnt[DIAGNOSE_TIME];
-//	USHORT			RxMcsCnt[DIAGNOSE_TIME][16];		// Rx MCS Count in range from 0 to 15, step in 1.
-	USHORT			RxMcsCnt[DIAGNOSE_TIME][24]; // 3*3
-}RtmpDiagStruct;
-#endif // DBG_DIAGNOSE //
-
-
-//
-//  The miniport adapter structure
-//
-typedef struct _RTMP_ADAPTER
-{
-	PVOID					OS_Cookie;	// save specific structure relative to OS
-	PNET_DEV				net_dev;
-	ULONG					VirtualIfCnt;
-
-
-
-	NDIS_SPIN_LOCK          irq_lock;
-	UCHAR                   irq_disabled;
-
-#ifdef RT2870
-/*****************************************************************************************/
-/*      USB related parameters                                                           */
-/*****************************************************************************************/
-	struct usb_config_descriptor		*config;
-	UINT								BulkInEpAddr;		// bulk-in endpoint address
-	UINT								BulkOutEpAddr[6];	// bulk-out endpoint address
-
-	UINT								NumberOfPipes;
-	USHORT								BulkOutMaxPacketSize;
-	USHORT								BulkInMaxPacketSize;
-
-	//======Control Flags
-	LONG                    	PendingIoCount;
-	ULONG						BulkFlags;
-	BOOLEAN                     bUsbTxBulkAggre;	// Flags for bulk out data priority
-
-
-	//======Timer Thread
-	RT2870_TIMER_QUEUE		TimerQ;
-	NDIS_SPIN_LOCK			TimerQLock;
-
-
-	//======Cmd Thread
-	CmdQ					CmdQ;
-	NDIS_SPIN_LOCK			CmdQLock;				// CmdQLock spinlock
-
-	BOOLEAN					TimerFunc_kill;
-	BOOLEAN					mlme_kill;
-
-
-	//======Semaphores (event)
-	struct semaphore			mlme_semaphore;			/* to sleep thread on	*/
-	struct semaphore			RTUSBCmd_semaphore;		/* to sleep thread on	*/
-	struct semaphore			RTUSBTimer_semaphore;
-#ifdef INF_AMAZON_SE
-	struct semaphore			UsbVendorReq_semaphore;
-	PVOID						UsbVendorReqBuf;
-#endif // INF_AMAZON_SE //
-	struct completion			TimerQComplete;
-	struct completion			mlmeComplete;
-	struct completion			CmdQComplete;
-	wait_queue_head_t			*wait;
-
-	//======Lock for 2870 ATE
-#ifdef RALINK_ATE
-	NDIS_SPIN_LOCK			GenericLock;		// ATE Tx/Rx generic spinlock
-#endif // RALINK_ATE //
-
-#endif // RT2870 //
-
-
-/*****************************************************************************************/
-	/*      Both PCI/USB related parameters                                                  */
-/*****************************************************************************************/
-
-
-/*****************************************************************************************/
-/*      Tx related parameters                                                           */
-/*****************************************************************************************/
-	BOOLEAN                 DeQueueRunning[NUM_OF_TX_RING];  // for ensuring RTUSBDeQueuePacket get call once
-	NDIS_SPIN_LOCK          DeQueueLock[NUM_OF_TX_RING];
-
-#ifdef RT2870
-	// Data related context and AC specified, 4 AC supported
-	NDIS_SPIN_LOCK			BulkOutLock[6];			// BulkOut spinlock for 4 ACs
-	NDIS_SPIN_LOCK			MLMEBulkOutLock;	// MLME BulkOut lock
-
-	HT_TX_CONTEXT			TxContext[NUM_OF_TX_RING];
-	NDIS_SPIN_LOCK			TxContextQueueLock[NUM_OF_TX_RING];		// TxContextQueue spinlock
-
-	// 4 sets of Bulk Out index and pending flag
-	UCHAR					NextBulkOutIndex[4];	// only used for 4 EDCA bulkout pipe
-
-	BOOLEAN					BulkOutPending[6];	// used for total 6 bulkout pipe
-	UCHAR					bulkResetPipeid;
-	BOOLEAN					MgmtBulkPending;
-	ULONG					bulkResetReq[6];
-#endif // RT2870 //
-
-	// resource for software backlog queues
-	QUEUE_HEADER            TxSwQueue[NUM_OF_TX_RING];  // 4 AC + 1 HCCA
-	NDIS_SPIN_LOCK          TxSwQueueLock[NUM_OF_TX_RING];	// TxSwQueue spinlock
-
-	RTMP_DMABUF             MgmtDescRing;               	// Shared memory for MGMT descriptors
-	RTMP_MGMT_RING          MgmtRing;
-	NDIS_SPIN_LOCK          MgmtRingLock;               	// Prio Ring spinlock
-
-
-/*****************************************************************************************/
-/*      Rx related parameters                                                           */
-/*****************************************************************************************/
-
-
-#ifdef RT2870
-	RX_CONTEXT				RxContext[RX_RING_SIZE];  // 1 for redundant multiple IRP bulk in.
-	NDIS_SPIN_LOCK			BulkInLock;				// BulkIn spinlock for 4 ACs
-	UCHAR					PendingRx;				// The Maxima pending Rx value should be 	RX_RING_SIZE.
-	UCHAR					NextRxBulkInIndex;		// Indicate the current RxContext Index which hold by Host controller.
-	UCHAR					NextRxBulkInReadIndex;	// Indicate the current RxContext Index which driver can read & process it.
-	ULONG					NextRxBulkInPosition;   // Want to contatenate 2 URB buffer while 1st is bulkin failed URB. This Position is 1st URB TransferLength.
-	ULONG					TransferBufferLength;	// current length of the packet buffer
-	ULONG					ReadPosition;			// current read position in a packet buffer
-#endif // RT2870 //
-
-
-/*****************************************************************************************/
-/*      ASIC related parameters                                                          */
-/*****************************************************************************************/
-	UINT32               	MACVersion;      	// MAC version. Record rt2860C(0x28600100) or rt2860D (0x28600101)..
-
-	// ---------------------------
-	// E2PROM
-	// ---------------------------
-	ULONG                   EepromVersion;          // byte 0: version, byte 1: revision, byte 2~3: unused
-	UCHAR                   EEPROMAddressNum;       // 93c46=6  93c66=8
-	USHORT                  EEPROMDefaultValue[NUM_EEPROM_BBP_PARMS];
-	ULONG                   FirmwareVersion;        // byte 0: Minor version, byte 1: Major version, otherwise unused.
-
-	// ---------------------------
-	// BBP Control
-	// ---------------------------
-	UCHAR                   BbpWriteLatch[140];     // record last BBP register value written via BBP_IO_WRITE/BBP_IO_WRITE_VY_REG_ID
-	UCHAR                   BbpRssiToDbmDelta;
-	BBP_R66_TUNING          BbpTuning;
-
-	// ----------------------------
-	// RFIC control
-	// ----------------------------
-	UCHAR                   RfIcType;       // RFIC_xxx
-	ULONG                   RfFreqOffset;   // Frequency offset for channel switching
-	RTMP_RF_REGS            LatchRfRegs;    // latch th latest RF programming value since RF IC doesn't support READ
-
-	EEPROM_ANTENNA_STRUC    Antenna;                            // Since ANtenna definition is different for a & g. We need to save it for future reference.
-	EEPROM_NIC_CONFIG2_STRUC    NicConfig2;
-
-	// This soft Rx Antenna Diversity mechanism is used only when user set
-	// RX Antenna = DIVERSITY ON
-	SOFT_RX_ANT_DIVERSITY   RxAnt;
-
-	UCHAR                   RFProgSeq;
-	CHANNEL_TX_POWER        TxPower[MAX_NUM_OF_CHANNELS];       // Store Tx power value for all channels.
-	CHANNEL_TX_POWER        ChannelList[MAX_NUM_OF_CHANNELS];   // list all supported channels for site survey
-	CHANNEL_11J_TX_POWER    TxPower11J[MAX_NUM_OF_11JCHANNELS];       // 802.11j channel and bw
-	CHANNEL_11J_TX_POWER    ChannelList11J[MAX_NUM_OF_11JCHANNELS];   // list all supported channels for site survey
-
-	UCHAR                   ChannelListNum;                     // number of channel in ChannelList[]
-	UCHAR					Bbp94;
-	BOOLEAN					BbpForCCK;
-	ULONG		Tx20MPwrCfgABand[5];
-	ULONG		Tx20MPwrCfgGBand[5];
-	ULONG		Tx40MPwrCfgABand[5];
-	ULONG		Tx40MPwrCfgGBand[5];
-
-	BOOLEAN     bAutoTxAgcA;                // Enable driver auto Tx Agc control
-	UCHAR	    TssiRefA;					// Store Tssi reference value as 25 temperature.
-	UCHAR	    TssiPlusBoundaryA[5];		// Tssi boundary for increase Tx power to compensate.
-	UCHAR	    TssiMinusBoundaryA[5];		// Tssi boundary for decrease Tx power to compensate.
-	UCHAR	    TxAgcStepA;					// Store Tx TSSI delta increment / decrement value
-	CHAR		TxAgcCompensateA;			// Store the compensation (TxAgcStep * (idx-1))
-
-	BOOLEAN     bAutoTxAgcG;                // Enable driver auto Tx Agc control
-	UCHAR	    TssiRefG;					// Store Tssi reference value as 25 temperature.
-	UCHAR	    TssiPlusBoundaryG[5];		// Tssi boundary for increase Tx power to compensate.
-	UCHAR	    TssiMinusBoundaryG[5];		// Tssi boundary for decrease Tx power to compensate.
-	UCHAR	    TxAgcStepG;					// Store Tx TSSI delta increment / decrement value
-	CHAR		TxAgcCompensateG;			// Store the compensation (TxAgcStep * (idx-1))
-
-	//+++For RT2870, the parameteres is start from BGRssiOffset1 ~ BGRssiOffset3
-	CHAR		BGRssiOffset0;				// Store B/G RSSI#0 Offset value on EEPROM 0x46h
-	CHAR		BGRssiOffset1;				// Store B/G RSSI#1 Offset value
-	CHAR		BGRssiOffset2;				// Store B/G RSSI#2 Offset value
-	//---
-
-	//+++For RT2870, the parameteres is start from ARssiOffset1 ~ ARssiOffset3
-	CHAR		ARssiOffset0;				// Store A RSSI#0 Offset value on EEPROM 0x4Ah
-	CHAR		ARssiOffset1;				// Store A RSSI#1 Offset value
-	CHAR		ARssiOffset2;				// Store A RSSI#2 Offset value
-	//---
-
-	CHAR		BLNAGain;					// Store B/G external LNA#0 value on EEPROM 0x44h
-	CHAR		ALNAGain0;					// Store A external LNA#0 value for ch36~64
-	CHAR		ALNAGain1;					// Store A external LNA#1 value for ch100~128
-	CHAR		ALNAGain2;					// Store A external LNA#2 value for ch132~165
-
-	// ----------------------------
-	// LED control
-	// ----------------------------
-	MCU_LEDCS_STRUC		LedCntl;
-	USHORT				Led1;	// read from EEPROM 0x3c
-	USHORT				Led2;	// EEPROM 0x3e
-	USHORT				Led3;	// EEPROM 0x40
-	UCHAR				LedIndicatorStregth;
-	UCHAR				RssiSingalstrengthOffet;
-    BOOLEAN				bLedOnScanning;
-	UCHAR				LedStatus;
-
-/*****************************************************************************************/
-/*      802.11 related parameters                                                        */
-/*****************************************************************************************/
-	// outgoing BEACON frame buffer and corresponding TXD
-	TXWI_STRUC              	BeaconTxWI;
-	PUCHAR						BeaconBuf;
-	USHORT						BeaconOffset[HW_BEACON_MAX_COUNT];
-
-	// pre-build PS-POLL and NULL frame upon link up. for efficiency purpose.
-	PSPOLL_FRAME            	PsPollFrame;
-	HEADER_802_11           	NullFrame;
-
-#ifdef RT2870
-	TX_CONTEXT				BeaconContext[BEACON_RING_SIZE];
-	TX_CONTEXT				NullContext;
-	TX_CONTEXT				PsPollContext;
-	TX_CONTEXT				RTSContext;
-#endif // RT2870 //
-
-
-
-//=========AP===========
-
-
-//=======STA===========
-#ifdef CONFIG_STA_SUPPORT
-/* Modified by Wu Xi-Kun 4/21/2006 */
-	// -----------------------------------------------
-	// STA specific configuration & operation status
-	// used only when pAd->OpMode == OPMODE_STA
-	// -----------------------------------------------
-	STA_ADMIN_CONFIG        StaCfg;           // user desired settings
-	STA_ACTIVE_CONFIG       StaActive;         // valid only when ADHOC_ON(pAd) || INFRA_ON(pAd)
-	CHAR                    nickname[IW_ESSID_MAX_SIZE+1]; // nickname, only used in the iwconfig i/f
-	NDIS_MEDIA_STATE        PreMediaState;
-#endif // CONFIG_STA_SUPPORT //
-
-//=======Common===========
-	// OP mode: either AP or STA
-	UCHAR                   OpMode;                     // OPMODE_STA, OPMODE_AP
-
-	NDIS_MEDIA_STATE        IndicateMediaState;			// Base on Indication state, default is NdisMediaStateDisConnected
-
-
-	// configuration: read from Registry & E2PROM
-	BOOLEAN                 bLocalAdminMAC;             // Use user changed MAC
-	UCHAR                   PermanentAddress[MAC_ADDR_LEN];    // Factory default MAC address
-	UCHAR                   CurrentAddress[MAC_ADDR_LEN];      // User changed MAC address
-
-	// ------------------------------------------------------
-	// common configuration to both OPMODE_STA and OPMODE_AP
-	// ------------------------------------------------------
-	COMMON_CONFIG           CommonCfg;
-	MLME_STRUCT             Mlme;
-
-	// AP needs those vaiables for site survey feature.
-	MLME_AUX                MlmeAux;           // temporary settings used during MLME state machine
-	BSS_TABLE               ScanTab;           // store the latest SCAN result
-
-	//About MacTab, the sta driver will use #0 and #1 for multicast and AP.
-	MAC_TABLE                 MacTab;     // ASIC on-chip WCID entry table.  At TX, ASIC always use key according to this on-chip table.
-	NDIS_SPIN_LOCK          MacTabLock;
-
-#ifdef DOT11_N_SUPPORT
-	BA_TABLE			BATable;
-#endif // DOT11_N_SUPPORT //
-	NDIS_SPIN_LOCK          BATabLock;
-	RALINK_TIMER_STRUCT RECBATimer;
-
-	// encryption/decryption KEY tables
-	CIPHER_KEY              SharedKey[MAX_MBSSID_NUM][4]; // STA always use SharedKey[BSS0][0..3]
-
-		// RX re-assembly buffer for fragmentation
-	FRAGMENT_FRAME          FragFrame;                  // Frame storage for fragment frame
-
-	// various Counters
-	COUNTER_802_3           Counters8023;               // 802.3 counters
-	COUNTER_802_11          WlanCounters;               // 802.11 MIB counters
-	COUNTER_RALINK          RalinkCounters;             // Ralink propriety counters
-	COUNTER_DRS             DrsCounters;                // counters for Dynamic TX Rate Switching
-	PRIVATE_STRUC           PrivateInfo;                // Private information & counters
-
-	// flags, see fRTMP_ADAPTER_xxx flags
-	ULONG                   Flags;                      // Represent current device status
-
-	// current TX sequence #
-	USHORT                  Sequence;
-
-	// Control disconnect / connect event generation
-	//+++Didn't used anymore
-	ULONG                   LinkDownTime;
-	//---
-	ULONG                   LastRxRate;
-	ULONG                   LastTxRate;
-	//+++Used only for Station
-	BOOLEAN                 bConfigChanged;         // Config Change flag for the same SSID setting
-	//---
-
-	ULONG                   ExtraInfo;              // Extra information for displaying status
-	ULONG                   SystemErrorBitmap;      // b0: E2PROM version error
-
-	//+++Didn't used anymore
-	ULONG                   MacIcVersion;           // MAC/BBP serial interface issue solved after ver.D
-	//---
-
-	// ---------------------------
-	// System event log
-	// ---------------------------
-	RT_802_11_EVENT_TABLE   EventTab;
-
-
-	BOOLEAN		HTCEnable;
-
-	/*****************************************************************************************/
-	/*      Statistic related parameters                                                     */
-	/*****************************************************************************************/
-#ifdef RT2870
-	ULONG						BulkOutDataOneSecCount;
-	ULONG						BulkInDataOneSecCount;
-	ULONG						BulkLastOneSecCount; // BulkOutDataOneSecCount + BulkInDataOneSecCount
-	ULONG						watchDogRxCnt;
-	ULONG						watchDogRxOverFlowCnt;
-	ULONG						watchDogTxPendingCnt[NUM_OF_TX_RING];
-#endif // RT2870 //
-
-	BOOLEAN						bUpdateBcnCntDone;
-	ULONG						watchDogMacDeadlock;	// prevent MAC/BBP into deadlock condition
-	// ----------------------------
-	// DEBUG paramerts
-	// ----------------------------
-	//ULONG		DebugSetting[4];
-	BOOLEAN		bBanAllBaSetup;
-	BOOLEAN		bPromiscuous;
-
-	// ----------------------------
-	// rt2860c emulation-use Parameters
-	// ----------------------------
-	ULONG		rtsaccu[30];
-	ULONG		ctsaccu[30];
-	ULONG		cfendaccu[30];
-	ULONG		bacontent[16];
-	ULONG		rxint[RX_RING_SIZE+1];
-	UCHAR		rcvba[60];
-	BOOLEAN		bLinkAdapt;
-	BOOLEAN		bForcePrintTX;
-	BOOLEAN		bForcePrintRX;
-	BOOLEAN		bDisablescanning;		//defined in RT2870 USB
-	BOOLEAN		bStaFifoTest;
-	BOOLEAN		bProtectionTest;
-	BOOLEAN		bHCCATest;
-	BOOLEAN		bGenOneHCCA;
-	BOOLEAN		bBroadComHT;
-	//+++Following add from RT2870 USB.
-	ULONG		BulkOutReq;
-	ULONG		BulkOutComplete;
-	ULONG		BulkOutCompleteOther;
-	ULONG		BulkOutCompleteCancel;	// seems not use now?
-	ULONG		BulkInReq;
-	ULONG		BulkInComplete;
-	ULONG		BulkInCompleteFail;
-	//---
-
-    struct wificonf			WIFItestbed;
-
-#ifdef RALINK_ATE
-	ATE_INFO				ate;
-#ifdef RT2870
-	BOOLEAN					ContinBulkOut;		//ATE bulk out control
-	BOOLEAN					ContinBulkIn;		//ATE bulk in control
-	atomic_t				BulkOutRemained;
-	atomic_t				BulkInRemained;
-#endif // RT2870 //
-#endif // RALINK_ATE //
-
-#ifdef DOT11_N_SUPPORT
-	struct reordering_mpdu_pool mpdu_blk_pool;
-#endif // DOT11_N_SUPPORT //
-
-	ULONG					OneSecondnonBEpackets;		// record non BE packets per second
-
-#if WIRELESS_EXT >= 12
-    struct iw_statistics    iw_stats;
-#endif
-
-	struct net_device_stats	stats;
-
-#ifdef BLOCK_NET_IF
-	BLOCK_QUEUE_ENTRY		blockQueueTab[NUM_OF_TX_RING];
-#endif // BLOCK_NET_IF //
-
-
-
-#ifdef MULTIPLE_CARD_SUPPORT
-	INT32					MC_RowID;
-	UCHAR					MC_FileName[256];
-#endif // MULTIPLE_CARD_SUPPORT //
-
-	ULONG					TbttTickCount;
-#ifdef PCI_MSI_SUPPORT
-	BOOLEAN					HaveMsi;
-#endif // PCI_MSI_SUPPORT //
-
-
-	UCHAR					is_on;
-
-#define TIME_BASE			(1000000/OS_HZ)
-#define TIME_ONE_SECOND		(1000000/TIME_BASE)
-	UCHAR					flg_be_adjust;
-	ULONG					be_adjust_last_time;
-
-
-#ifdef IKANOS_VX_1X0
-	struct IKANOS_TX_INFO	IkanosTxInfo;
-	struct IKANOS_TX_INFO	IkanosRxInfo[MAX_MBSSID_NUM + MAX_WDS_ENTRY + MAX_APCLI_NUM + MAX_MESH_NUM];
-#endif // IKANOS_VX_1X0 //
-
-
-#ifdef DBG_DIAGNOSE
-	RtmpDiagStruct	DiagStruct;
-#endif // DBG_DIAGNOSE //
-
-
-	UINT8					PM_FlgSuspend;
-} RTMP_ADAPTER, *PRTMP_ADAPTER;
-
-//
-// Cisco IAPP format
-//
-typedef struct  _CISCO_IAPP_CONTENT_
-{
-	USHORT     Length;        //IAPP Length
-	UCHAR      MessageType;      //IAPP type
-	UCHAR      FunctionCode;     //IAPP function type
-	UCHAR      DestinaionMAC[MAC_ADDR_LEN];
-	UCHAR      SourceMAC[MAC_ADDR_LEN];
-	USHORT     Tag;           //Tag(element IE) - Adjacent AP report
-	USHORT     TagLength;     //Length of element not including 4 byte header
-	UCHAR      OUI[4];           //0x00, 0x40, 0x96, 0x00
-	UCHAR      PreviousAP[MAC_ADDR_LEN];       //MAC Address of access point
-	USHORT     Channel;
-	USHORT     SsidLen;
-	UCHAR      Ssid[MAX_LEN_OF_SSID];
-	USHORT     Seconds;          //Seconds that the client has been disassociated.
-} CISCO_IAPP_CONTENT, *PCISCO_IAPP_CONTENT;
-
-#define DELAYINTMASK		0x0003fffb
-#define INTMASK				0x0003fffb
-#define IndMask				0x0003fffc
-#define RxINT				0x00000005	// Delayed Rx or indivi rx
-#define TxDataInt			0x000000fa	// Delayed Tx or indivi tx
-#define TxMgmtInt			0x00000102	// Delayed Tx or indivi tx
-#define TxCoherent			0x00020000	// tx coherent
-#define RxCoherent			0x00010000	// rx coherent
-#define McuCommand			0x00000200	// mcu
-#define PreTBTTInt			0x00001000	// Pre-TBTT interrupt
-#define TBTTInt				0x00000800		// TBTT interrupt
-#define GPTimeOutInt			0x00008000		// GPtimeout interrupt
-#define AutoWakeupInt		0x00004000		// AutoWakeupInt interrupt
-#define FifoStaFullInt			0x00002000	//  fifo statistics full interrupt
-
-
-typedef struct _RX_BLK_
-{
-//	RXD_STRUC		RxD; // sample
-	RT28XX_RXD_STRUC	RxD;
-	PRXWI_STRUC			pRxWI;
-	PHEADER_802_11		pHeader;
-	PNDIS_PACKET		pRxPacket;
-	UCHAR				*pData;
-	USHORT				DataSize;
-	USHORT				Flags;
-	UCHAR				UserPriority;	// for calculate TKIP MIC using
-} RX_BLK;
-
-
-#define RX_BLK_SET_FLAG(_pRxBlk, _flag)		(_pRxBlk->Flags |= _flag)
-#define RX_BLK_TEST_FLAG(_pRxBlk, _flag)	(_pRxBlk->Flags & _flag)
-#define RX_BLK_CLEAR_FLAG(_pRxBlk, _flag)	(_pRxBlk->Flags &= ~(_flag))
-
-
-#define fRX_WDS			0x0001
-#define fRX_AMSDU       0x0002
-#define fRX_ARALINK     0x0004
-#define fRX_HTC         0x0008
-#define fRX_PAD         0x0010
-#define fRX_AMPDU       0x0020
-#define fRX_QOS			0x0040
-#define fRX_INFRA		0x0080
-#define fRX_EAP			0x0100
-#define fRX_MESH		0x0200
-#define fRX_APCLI		0x0400
-#define fRX_DLS			0x0800
-#define fRX_WPI			0x1000
-
-#define LENGTH_AMSDU_SUBFRAMEHEAD	14
-#define LENGTH_ARALINK_SUBFRAMEHEAD	14
-#define LENGTH_ARALINK_HEADER_FIELD	 2
-
-#define TX_UNKOWN_FRAME			0x00
-#define TX_MCAST_FRAME			0x01
-#define TX_LEGACY_FRAME			0x02
-#define TX_AMPDU_FRAME			0x04
-#define TX_AMSDU_FRAME			0x08
-#define TX_RALINK_FRAME			0x10
-#define TX_FRAG_FRAME			0x20
-
-
-//	Currently the sizeof(TX_BLK) is 148 bytes.
-typedef struct _TX_BLK_
-{
-	UCHAR				QueIdx;
-	UCHAR				TxFrameType;				// Indicate the Transmission type of the all frames in one batch
-	UCHAR				TotalFrameNum;				// Total frame number want to send-out in one batch
-	USHORT				TotalFragNum;				// Total frame fragments required in one batch
-	USHORT				TotalFrameLen;				// Total length of all frames want to send-out in one batch
-
-	QUEUE_HEADER		TxPacketList;
-	MAC_TABLE_ENTRY		*pMacEntry;					// NULL: packet with 802.11 RA field is multicast/broadcast address
-	HTTRANSMIT_SETTING	*pTransmit;
-
-	// Following structure used for the characteristics of a specific packet.
-	PNDIS_PACKET		pPacket;
-	PUCHAR				pSrcBufHeader;				// Reference to the head of sk_buff->data
-	PUCHAR				pSrcBufData;				// Reference to the sk_buff->data, will changed depends on hanlding progresss
-	UINT				SrcBufLen;					// Length of packet payload which not including Layer 2 header
-	PUCHAR				pExtraLlcSnapEncap;			// NULL means no extra LLC/SNAP is required
-	UCHAR				HeaderBuf[80];				// TempBuffer for TX_INFO + TX_WI + 802.11 Header + padding + AMSDU SubHeader + LLC/SNAP
-	UCHAR				MpduHeaderLen;				// 802.11 header length NOT including the padding
-	UCHAR				HdrPadLen;					// recording Header Padding Length;
-	UCHAR				apidx;						// The interface associated to this packet
-	UCHAR				Wcid;						// The MAC entry associated to this packet
-	UCHAR				UserPriority;				// priority class of packet
-	UCHAR				FrameGap;					// what kind of IFS this packet use
-	UCHAR				MpduReqNum;					// number of fragments of this frame
-	UCHAR				TxRate;						// TODO: Obsoleted? Should change to MCS?
-	UCHAR				CipherAlg;					// cipher alogrithm
-	PCIPHER_KEY			pKey;
-
-
-
-	USHORT				Flags;						//See following definitions for detail.
-
-	//YOU SHOULD NOT TOUCH IT! Following parameters are used for hardware-depended layer.
-	ULONG				Priv;						// Hardware specific value saved in here.
-} TX_BLK, *PTX_BLK;
-
-
-#define fTX_bRtsRequired		0x0001	// Indicate if need send RTS frame for protection. Not used in RT2860/RT2870.
-#define fTX_bAckRequired       	0x0002	// the packet need ack response
-#define fTX_bPiggyBack     		0x0004	// Legacy device use Piggback or not
-#define fTX_bHTRate         	0x0008	// allow to use HT rate
-//#define fTX_bForceLowRate       0x0010	// force to use Low Rate
-#define fTX_bForceNonQoS       	0x0010	// force to transmit frame without WMM-QoS in HT mode
-#define fTX_bAllowFrag       	0x0020	// allow to fragment the packet, A-MPDU, A-MSDU, A-Ralink is not allowed to fragment
-#define fTX_bMoreData			0x0040	// there are more data packets in PowerSave Queue
-#define fTX_bWMM				0x0080	// QOS Data
-
-#define fTX_bClearEAPFrame		0x0100
-
-
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-
-
-
-#define TX_BLK_ASSIGN_FLAG(_pTxBlk, _flag, value)	\
-		do {										\
-			if (value) 								\
-				(_pTxBlk->Flags |= _flag) 			\
-			else 									\
-				(_pTxBlk->Flags &= ~(_flag))		\
-		}while(0)
-
-#define TX_BLK_SET_FLAG(_pTxBlk, _flag)		(_pTxBlk->Flags |= _flag)
-#define TX_BLK_TEST_FLAG(_pTxBlk, _flag)	(((_pTxBlk->Flags & _flag) == _flag) ? 1 : 0)
-#define TX_BLK_CLEAR_FLAG(_pTxBlk, _flag)	(_pTxBlk->Flags &= ~(_flag))
-
-
-
-
-
-//------------------------------------------------------------------------------------------
-
-
-
-#ifdef RT_BIG_ENDIAN
-static inline VOID	WriteBackToDescriptor(
-	IN  PUCHAR			Dest,
- 	IN	PUCHAR			Src,
-    IN  BOOLEAN			DoEncrypt,
-	IN  ULONG           DescriptorType)
-{
-	UINT32 *p1, *p2;
-
-	p1 = ((UINT32 *)Dest);
-	p2 = ((UINT32 *)Src);
-
-	*p1 = *p2;
-	*(p1+2) = *(p2+2);
-	*(p1+3) = *(p2+3);
-	*(p1+1) = *(p2+1); // Word 1; this must be written back last
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Endian conversion of Tx/Rx descriptor .
-
-	Arguments:
-		pAd 	Pointer to our adapter
-		pData			Pointer to Tx/Rx descriptor
-		DescriptorType	Direction of the frame
-
-	Return Value:
-		None
-
-	Note:
-		Call this function when read or update descriptor
-	========================================================================
-*/
-static inline VOID	RTMPWIEndianChange(
-	IN	PUCHAR			pData,
-	IN	ULONG			DescriptorType)
-{
-	int size;
-	int i;
-
-	size = ((DescriptorType == TYPE_TXWI) ? TXWI_SIZE : RXWI_SIZE);
-
-	if(DescriptorType == TYPE_TXWI)
-	{
-		*((UINT32 *)(pData)) = SWAP32(*((UINT32 *)(pData)));		// Byte 0~3
-		*((UINT32 *)(pData + 4)) = SWAP32(*((UINT32 *)(pData+4)));	// Byte 4~7
-	}
-	else
-	{
-		for(i=0; i < size/4 ; i++)
-			*(((UINT32 *)pData) +i) = SWAP32(*(((UINT32 *)pData)+i));
-	}
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Endian conversion of Tx/Rx descriptor .
-
-	Arguments:
-		pAd 	Pointer to our adapter
-		pData			Pointer to Tx/Rx descriptor
-		DescriptorType	Direction of the frame
-
-	Return Value:
-		None
-
-	Note:
-		Call this function when read or update descriptor
-	========================================================================
-*/
-
-#ifdef RT2870
-static inline VOID	RTMPDescriptorEndianChange(
-	IN	PUCHAR			pData,
-	IN	ULONG			DescriptorType)
-{
-	*((UINT32 *)(pData)) = SWAP32(*((UINT32 *)(pData)));
-}
-#endif // RT2870 //
-/*
-	========================================================================
-
-	Routine Description:
-		Endian conversion of all kinds of 802.11 frames .
-
-	Arguments:
-		pAd 	Pointer to our adapter
-		pData			Pointer to the 802.11 frame structure
-		Dir 			Direction of the frame
-		FromRxDoneInt	Caller is from RxDone interrupt
-
-	Return Value:
-		None
-
-	Note:
-		Call this function when read or update buffer data
-	========================================================================
-*/
-static inline VOID	RTMPFrameEndianChange(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pData,
-	IN	ULONG			Dir,
-	IN	BOOLEAN 		FromRxDoneInt)
-{
-	PHEADER_802_11 pFrame;
-	PUCHAR	pMacHdr;
-
-	// swab 16 bit fields - Frame Control field
-	if(Dir == DIR_READ)
-	{
-		*(USHORT *)pData = SWAP16(*(USHORT *)pData);
-	}
-
-	pFrame = (PHEADER_802_11) pData;
-	pMacHdr = (PUCHAR) pFrame;
-
-	// swab 16 bit fields - Duration/ID field
-	*(USHORT *)(pMacHdr + 2) = SWAP16(*(USHORT *)(pMacHdr + 2));
-
-	// swab 16 bit fields - Sequence Control field
-	*(USHORT *)(pMacHdr + 22) = SWAP16(*(USHORT *)(pMacHdr + 22));
-
-	if(pFrame->FC.Type == BTYPE_MGMT)
-	{
-		switch(pFrame->FC.SubType)
-		{
-			case SUBTYPE_ASSOC_REQ:
-			case SUBTYPE_REASSOC_REQ:
-				// swab 16 bit fields - CapabilityInfo field
-				pMacHdr += sizeof(HEADER_802_11);
-				*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-
-				// swab 16 bit fields - Listen Interval field
-				pMacHdr += 2;
-				*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-				break;
-
-			case SUBTYPE_ASSOC_RSP:
-			case SUBTYPE_REASSOC_RSP:
-				// swab 16 bit fields - CapabilityInfo field
-				pMacHdr += sizeof(HEADER_802_11);
-				*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-
-				// swab 16 bit fields - Status Code field
-				pMacHdr += 2;
-				*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-
-				// swab 16 bit fields - AID field
-				pMacHdr += 2;
-				*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-				break;
-
-			case SUBTYPE_AUTH:
-				// If from APHandleRxDoneInterrupt routine, it is still a encrypt format.
-				// The convertion is delayed to RTMPHandleDecryptionDoneInterrupt.
-				if(!FromRxDoneInt && pFrame->FC.Wep == 1)
-					break;
-				else
-				{
-					// swab 16 bit fields - Auth Alg No. field
-					pMacHdr += sizeof(HEADER_802_11);
-					*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-
-					// swab 16 bit fields - Auth Seq No. field
-					pMacHdr += 2;
-					*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-
-					// swab 16 bit fields - Status Code field
-					pMacHdr += 2;
-					*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-				}
-				break;
-
-			case SUBTYPE_BEACON:
-			case SUBTYPE_PROBE_RSP:
-				// swab 16 bit fields - BeaconInterval field
-				pMacHdr += (sizeof(HEADER_802_11) + TIMESTAMP_LEN);
-				*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-
-				// swab 16 bit fields - CapabilityInfo field
-				pMacHdr += sizeof(USHORT);
-				*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-				break;
-
-			case SUBTYPE_DEAUTH:
-			case SUBTYPE_DISASSOC:
-				// swab 16 bit fields - Reason code field
-				pMacHdr += sizeof(HEADER_802_11);
-				*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-				break;
-		}
-	}
-	else if( pFrame->FC.Type == BTYPE_DATA )
-	{
-	}
-	else if(pFrame->FC.Type == BTYPE_CNTL)
-	{
-		switch(pFrame->FC.SubType)
-		{
-			case SUBTYPE_BLOCK_ACK_REQ:
-				{
-					PFRAME_BA_REQ pBAReq = (PFRAME_BA_REQ)pFrame;
-					*(USHORT *)(&pBAReq->BARControl) = SWAP16(*(USHORT *)(&pBAReq->BARControl));
-					pBAReq->BAStartingSeq.word = SWAP16(pBAReq->BAStartingSeq.word);
-				}
-				break;
-			case SUBTYPE_BLOCK_ACK:
-				// For Block Ack packet, the HT_CONTROL field is in the same offset with Addr3
-				*(UINT32 *)(&pFrame->Addr3[0]) = SWAP32(*(UINT32 *)(&pFrame->Addr3[0]));
-				break;
-
-			case SUBTYPE_ACK:
-				//For ACK packet, the HT_CONTROL field is in the same offset with Addr2
-				*(UINT32 *)(&pFrame->Addr2[0])=	SWAP32(*(UINT32 *)(&pFrame->Addr2[0]));
-				break;
-		}
-	}
-	else
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("Invalid Frame Type!!!\n"));
-	}
-
-	// swab 16 bit fields - Frame Control
-	if(Dir == DIR_WRITE)
-	{
-		*(USHORT *)pData = SWAP16(*(USHORT *)pData);
-	}
-}
-#endif // RT_BIG_ENDIAN //
-
-
-static inline VOID ConvertMulticastIP2MAC(
-	IN PUCHAR pIpAddr,
-	IN PUCHAR *ppMacAddr,
-	IN UINT16 ProtoType)
-{
-	if (pIpAddr == NULL)
-		return;
-
-	if (ppMacAddr == NULL || *ppMacAddr == NULL)
-		return;
-
-	switch (ProtoType)
-	{
-		case ETH_P_IPV6:
-//			memset(*ppMacAddr, 0, ETH_LENGTH_OF_ADDRESS);
-			*(*ppMacAddr) = 0x33;
-			*(*ppMacAddr + 1) = 0x33;
-			*(*ppMacAddr + 2) = pIpAddr[12];
-			*(*ppMacAddr + 3) = pIpAddr[13];
-			*(*ppMacAddr + 4) = pIpAddr[14];
-			*(*ppMacAddr + 5) = pIpAddr[15];
-			break;
-
-		case ETH_P_IP:
-		default:
-//			memset(*ppMacAddr, 0, ETH_LENGTH_OF_ADDRESS);
-			*(*ppMacAddr) = 0x01;
-			*(*ppMacAddr + 1) = 0x00;
-			*(*ppMacAddr + 2) = 0x5e;
-			*(*ppMacAddr + 3) = pIpAddr[1] & 0x7f;
-			*(*ppMacAddr + 4) = pIpAddr[2];
-			*(*ppMacAddr + 5) = pIpAddr[3];
-			break;
-	}
-
-	return;
-}
-
-BOOLEAN RTMPCheckForHang(
-	IN  NDIS_HANDLE MiniportAdapterContext
-	);
-
-VOID  RTMPHalt(
-	IN  NDIS_HANDLE MiniportAdapterContext
-	);
-
-//
-//  Private routines in rtmp_init.c
-//
-NDIS_STATUS RTMPAllocAdapterBlock(
-	IN PVOID			handle,
-	OUT PRTMP_ADAPTER   *ppAdapter
-	);
-
-NDIS_STATUS RTMPAllocTxRxRingMemory(
-	IN  PRTMP_ADAPTER   pAd
-	);
-
-NDIS_STATUS RTMPFindAdapter(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  NDIS_HANDLE     WrapperConfigurationContext
-	);
-
-NDIS_STATUS	RTMPReadParametersHook(
-	IN	PRTMP_ADAPTER pAd
-	);
-
-VOID RTMPFreeAdapter(
-	IN  PRTMP_ADAPTER   pAd
-	);
-
-NDIS_STATUS NICReadRegParameters(
-	IN  PRTMP_ADAPTER       pAd,
-	IN  NDIS_HANDLE         WrapperConfigurationContext
-	);
-
-#ifdef RT2870
-VOID NICInitRT30xxRFRegisters(
-	IN PRTMP_ADAPTER pAd);
-#endif // RT2870 //
-
-VOID NICReadEEPROMParameters(
-	IN  PRTMP_ADAPTER       pAd,
-	IN	PUCHAR				mac_addr);
-
-VOID NICInitAsicFromEEPROM(
-	IN  PRTMP_ADAPTER       pAd);
-
-VOID NICInitTxRxRingAndBacklogQueue(
-	IN  PRTMP_ADAPTER   pAd);
-
-NDIS_STATUS NICInitializeAdapter(
-	IN  PRTMP_ADAPTER   pAd,
-	IN   BOOLEAN    bHardReset);
-
-NDIS_STATUS NICInitializeAsic(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  BOOLEAN		bHardReset);
-
-VOID NICIssueReset(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID RTMPRingCleanUp(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR           RingType);
-
-VOID RxTest(
-	IN  PRTMP_ADAPTER   pAd);
-
-NDIS_STATUS DbgSendPacket(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PNDIS_PACKET    pPacket);
-
-VOID UserCfgInit(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID NICResetFromError(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID NICEraseFirmware(
-	IN PRTMP_ADAPTER pAd);
-
-NDIS_STATUS NICLoadFirmware(
-	IN  PRTMP_ADAPTER   pAd);
-
-NDIS_STATUS NICLoadRateSwitchingParams(
-	IN PRTMP_ADAPTER pAd);
-
-BOOLEAN NICCheckForHang(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID NICUpdateFifoStaCounters(
-	IN PRTMP_ADAPTER pAd);
-
-VOID NICUpdateRawCounters(
-	IN  PRTMP_ADAPTER   pAd);
-
-#if 0
-ULONG RTMPEqualMemory(
-	IN  PVOID   pSrc1,
-	IN  PVOID   pSrc2,
-	IN  ULONG   Length);
-#endif
-
-ULONG	RTMPNotAllZero(
-	IN	PVOID	pSrc1,
-	IN	ULONG	Length);
-
-VOID RTMPZeroMemory(
-	IN  PVOID   pSrc,
-	IN  ULONG   Length);
-
-ULONG RTMPCompareMemory(
-	IN  PVOID   pSrc1,
-	IN  PVOID   pSrc2,
-	IN  ULONG   Length);
-
-VOID RTMPMoveMemory(
-	OUT PVOID   pDest,
-	IN  PVOID   pSrc,
-	IN  ULONG   Length);
-
-VOID AtoH(
-	char	*src,
-	UCHAR	*dest,
-	int		destlen);
-
-UCHAR BtoH(
-	char ch);
-
-VOID RTMPPatchMacBbpBug(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID RTMPPatchCardBus(
-	IN	PRTMP_ADAPTER	pAdapter);
-
-VOID RTMPPatchRalinkCardBus(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	ULONG			Bus);
-
-ULONG RTMPReadCBConfig(
-	IN	ULONG	Bus,
-	IN	ULONG	Slot,
-	IN	ULONG	Func,
-	IN	ULONG	Offset);
-
-VOID RTMPWriteCBConfig(
-	IN	ULONG	Bus,
-	IN	ULONG	Slot,
-	IN	ULONG	Func,
-	IN	ULONG	Offset,
-	IN	ULONG	Value);
-
-VOID RTMPInitTimer(
-	IN  PRTMP_ADAPTER           pAd,
-	IN  PRALINK_TIMER_STRUCT    pTimer,
-	IN  PVOID                   pTimerFunc,
-	IN	PVOID					pData,
-	IN  BOOLEAN                 Repeat);
-
-VOID RTMPSetTimer(
-	IN  PRALINK_TIMER_STRUCT    pTimer,
-	IN  ULONG                   Value);
-
-
-VOID RTMPModTimer(
-	IN	PRALINK_TIMER_STRUCT	pTimer,
-	IN	ULONG					Value);
-
-VOID RTMPCancelTimer(
-	IN  PRALINK_TIMER_STRUCT    pTimer,
-	OUT BOOLEAN                 *pCancelled);
-
-VOID RTMPSetLED(
-	IN PRTMP_ADAPTER 	pAd,
-	IN UCHAR			Status);
-
-VOID RTMPSetSignalLED(
-	IN PRTMP_ADAPTER 	pAd,
-	IN NDIS_802_11_RSSI Dbm);
-
-VOID RTMPEnableRxTx(
-	IN PRTMP_ADAPTER	pAd);
-
-//
-// prototype in action.c
-//
-VOID ActionStateMachineInit(
-    IN	PRTMP_ADAPTER	pAd,
-    IN  STATE_MACHINE *S,
-    OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID MlmeADDBAAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-
-VOID MlmeDELBAAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-
-VOID MlmeDLSAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-
-VOID MlmeInvalidAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-
-VOID MlmeQOSAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-
-#ifdef DOT11_N_SUPPORT
-VOID PeerAddBAReqAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerAddBARspAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerDelBAAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerBAAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-#endif // DOT11_N_SUPPORT //
-
-VOID SendPSMPAction(
-	IN PRTMP_ADAPTER	pAd,
-	IN UCHAR			Wcid,
-	IN UCHAR			Psmp);
-
-
-#ifdef DOT11N_DRAFT3
-VOID SendBSS2040CoexistMgmtAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR	Wcid,
-	IN	UCHAR	apidx,
-	IN	UCHAR	InfoReq);
-
-VOID SendNotifyBWActionFrame(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR  Wcid,
-	IN UCHAR apidx);
-
-BOOLEAN ChannelSwitchSanityCheck(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    UCHAR  Wcid,
-	IN    UCHAR  NewChannel,
-	IN    UCHAR  Secondary);
-
-VOID ChannelSwitchAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    UCHAR  Wcid,
-	IN    UCHAR  Channel,
-	IN    UCHAR  Secondary);
-
-ULONG BuildIntolerantChannelRep(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    PUCHAR  pDest);
-
-VOID Update2040CoexistFrameAndNotify(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    UCHAR  Wcid,
-	IN	BOOLEAN	bAddIntolerantCha);
-
-VOID Send2040CoexistAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    UCHAR  Wcid,
-	IN	BOOLEAN	bAddIntolerantCha);
-#endif // DOT11N_DRAFT3 //
-
-VOID PeerRMAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerPublicAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-#ifdef CONFIG_STA_SUPPORT
-VOID StaPublicAction(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR Bss2040Coexist);
-#endif // CONFIG_STA_SUPPORT //
-
-
-VOID PeerBSSTranAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-#ifdef DOT11_N_SUPPORT
-VOID PeerHTAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-#endif // DOT11_N_SUPPORT //
-
-VOID PeerQOSAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-
-#ifdef QOS_DLS_SUPPORT
-VOID PeerDLSAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-#endif // QOS_DLS_SUPPORT //
-
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-VOID DlsParmFill(
-	IN PRTMP_ADAPTER pAd,
-	IN OUT MLME_DLS_REQ_STRUCT *pDlsReq,
-	IN PRT_802_11_DLS pDls,
-	IN USHORT reason);
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef DOT11_N_SUPPORT
-VOID RECBATimerTimeout(
-    IN PVOID SystemSpecific1,
-    IN PVOID FunctionContext,
-    IN PVOID SystemSpecific2,
-    IN PVOID SystemSpecific3);
-
-VOID ORIBATimerTimeout(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID SendRefreshBAR(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MAC_TABLE_ENTRY	*pEntry);
-#endif // DOT11_N_SUPPORT //
-
-VOID ActHeaderInit(
-    IN	PRTMP_ADAPTER	pAd,
-    IN OUT PHEADER_802_11 pHdr80211,
-    IN PUCHAR Addr1,
-    IN PUCHAR Addr2,
-    IN PUCHAR Addr3);
-
-VOID BarHeaderInit(
-	IN	PRTMP_ADAPTER	pAd,
-	IN OUT PFRAME_BAR pCntlBar,
-	IN PUCHAR pDA,
-	IN PUCHAR pSA);
-
-VOID InsertActField(
-	IN PRTMP_ADAPTER pAd,
-	OUT PUCHAR pFrameBuf,
-	OUT PULONG pFrameLen,
-	IN UINT8 Category,
-	IN UINT8 ActCode);
-
-BOOLEAN QosBADataParse(
-	IN PRTMP_ADAPTER	pAd,
-	IN BOOLEAN bAMSDU,
-	IN PUCHAR p8023Header,
-	IN UCHAR	WCID,
-	IN UCHAR	TID,
-	IN USHORT Sequence,
-	IN UCHAR DataOffset,
-	IN USHORT Datasize,
-	IN UINT   CurRxIndex);
-
-#ifdef DOT11_N_SUPPORT
-BOOLEAN CntlEnqueueForRecv(
-    IN	PRTMP_ADAPTER	pAd,
-	IN ULONG Wcid,
-    IN ULONG MsgLen,
-	IN PFRAME_BA_REQ pMsg);
-
-VOID BaAutoManSwitch(
-	IN	PRTMP_ADAPTER	pAd);
-#endif // DOT11_N_SUPPORT //
-
-VOID HTIOTCheck(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    UCHAR     BatRecIdx);
-
-//
-// Private routines in rtmp_data.c
-//
-BOOLEAN RTMPHandleRxDoneInterrupt(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID RTMPHandleTxDoneInterrupt(
-	IN  PRTMP_ADAPTER   pAd);
-
-BOOLEAN RTMPHandleTxRingDmaDoneInterrupt(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  INT_SOURCE_CSR_STRUC TxRingBitmap);
-
-VOID RTMPHandleMgmtRingDmaDoneInterrupt(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID RTMPHandleTBTTInterrupt(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID RTMPHandlePreTBTTInterrupt(
-	IN  PRTMP_ADAPTER   pAd);
-
-void RTMPHandleTwakeupInterrupt(
-	IN PRTMP_ADAPTER pAd);
-
-VOID	RTMPHandleRxCoherentInterrupt(
-	IN	PRTMP_ADAPTER	pAd);
-
-BOOLEAN TxFrameIsAggregatible(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pPrevAddr1,
-	IN  PUCHAR          p8023hdr);
-
-BOOLEAN PeerIsAggreOn(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  ULONG          TxRate,
-    IN  PMAC_TABLE_ENTRY pMacEntry);
-
-#if 0	// It's not be used
-HTTRANSMIT_SETTING  *GetTxMode(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk);
-#endif
-
-NDIS_STATUS Sniff2BytesFromNdisBuffer(
-	IN  PNDIS_BUFFER    pFirstBuffer,
-	IN  UCHAR           DesiredOffset,
-	OUT PUCHAR          pByte0,
-	OUT PUCHAR          pByte1);
-
-NDIS_STATUS STASendPacket(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PNDIS_PACKET    pPacket);
-
-VOID STASendPackets(
-	IN  NDIS_HANDLE     MiniportAdapterContext,
-	IN  PPNDIS_PACKET   ppPacketArray,
-	IN  UINT            NumberOfPackets);
-
-VOID RTMPDeQueuePacket(
-	IN  PRTMP_ADAPTER   pAd,
-   	IN	BOOLEAN			bIntContext,
-	IN  UCHAR			QueIdx,
-	IN	UCHAR			Max_Tx_Packets);
-
-NDIS_STATUS	RTMPHardTransmit(
-	IN PRTMP_ADAPTER	pAd,
-	IN PNDIS_PACKET		pPacket,
-	IN  UCHAR			QueIdx,
-	OUT	PULONG			pFreeTXDLeft);
-
-NDIS_STATUS	STAHardTransmit(
-	IN PRTMP_ADAPTER	pAd,
-	IN TX_BLK			*pTxBlk,
-	IN  UCHAR			QueIdx);
-
-VOID STARxEAPOLFrameIndicate(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MAC_TABLE_ENTRY	*pEntry,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID);
-
-NDIS_STATUS RTMPFreeTXDRequest(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR           RingType,
-	IN  UCHAR           NumberRequired,
-	IN 	PUCHAR          FreeNumberIs);
-
-NDIS_STATUS MlmeHardTransmit(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR	QueIdx,
-	IN  PNDIS_PACKET    pPacket);
-
-NDIS_STATUS MlmeHardTransmitMgmtRing(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR	QueIdx,
-	IN  PNDIS_PACKET    pPacket);
-
-NDIS_STATUS MlmeHardTransmitTxRing(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR	QueIdx,
-	IN  PNDIS_PACKET    pPacket);
-
-USHORT  RTMPCalcDuration(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR           Rate,
-	IN  ULONG           Size);
-
-VOID RTMPWriteTxWI(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PTXWI_STRUC		pTxWI,
-	IN  BOOLEAN    		FRAG,
-	IN  BOOLEAN    		CFACK,
-	IN  BOOLEAN    		InsTimestamp,
-	IN	BOOLEAN			AMPDU,
-	IN	BOOLEAN			Ack,
-	IN	BOOLEAN			NSeq,		// HW new a sequence.
-	IN	UCHAR			BASize,
-	IN	UCHAR			WCID,
-	IN	ULONG			Length,
-	IN  UCHAR      		PID,
-	IN	UCHAR			TID,
-	IN	UCHAR			TxRate,
-	IN	UCHAR			Txopmode,
-	IN	BOOLEAN			CfAck,
-	IN	HTTRANSMIT_SETTING	*pTransmit);
-
-
-VOID RTMPWriteTxWI_Data(
-	IN	PRTMP_ADAPTER		pAd,
-	IN	OUT PTXWI_STRUC		pTxWI,
-	IN	TX_BLK				*pTxBlk);
-
-
-VOID RTMPWriteTxWI_Cache(
-	IN	PRTMP_ADAPTER		pAd,
-	IN	OUT PTXWI_STRUC		pTxWI,
-	IN	TX_BLK				*pTxBlk);
-
-VOID RTMPWriteTxDescriptor(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PTXD_STRUC		pTxD,
-	IN	BOOLEAN			bWIV,
-	IN	UCHAR			QSEL);
-
-VOID RTMPSuspendMsduTransmission(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID RTMPResumeMsduTransmission(
-	IN  PRTMP_ADAPTER   pAd);
-
-NDIS_STATUS MiniportMMRequest(
-	IN  PRTMP_ADAPTER   pAd,
-	IN	UCHAR			QueIdx,
-	IN	PUCHAR			pData,
-	IN  UINT            Length);
-
-NDIS_STATUS MiniportDataMMRequest(
-	 IN  PRTMP_ADAPTER   pAd,
-	 IN  UCHAR           QueIdx,
-	 IN  PUCHAR          pData,
-	 IN  UINT            Length);
-
-VOID RTMPSendNullFrame(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR           TxRate,
-	IN	BOOLEAN			bQosNull);
-
-VOID RTMPSendDisassociationFrame(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID RTMPSendRTSFrame(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pDA,
-	IN	unsigned int	NextMpduSize,
-	IN  UCHAR           TxRate,
-	IN  UCHAR           RTSRate,
-	IN  USHORT          AckDuration,
-	IN  UCHAR           QueIdx,
-	IN  UCHAR			FrameGap);
-
-
-NDIS_STATUS RTMPApplyPacketFilter(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PRT28XX_RXD_STRUC      pRxD,
-	IN  PHEADER_802_11  pHeader);
-
-PQUEUE_HEADER   RTMPCheckTxSwQueue(
-	IN  PRTMP_ADAPTER   pAd,
-	OUT UCHAR           *QueIdx);
-
-#ifdef CONFIG_STA_SUPPORT
-VOID RTMPReportMicError(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PCIPHER_KEY     pWpaKey);
-
-VOID	WpaMicFailureReportFrame(
-	IN  PRTMP_ADAPTER    pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID    WpaDisassocApAndBlockAssoc(
-    IN  PVOID SystemSpecific1,
-    IN  PVOID FunctionContext,
-    IN  PVOID SystemSpecific2,
-    IN  PVOID SystemSpecific3);
-#endif // CONFIG_STA_SUPPORT //
-
-NDIS_STATUS RTMPCloneNdisPacket(
-	IN  PRTMP_ADAPTER   pAd,
-	IN	BOOLEAN    pInsAMSDUHdr,
-	IN  PNDIS_PACKET    pInPacket,
-	OUT PNDIS_PACKET   *ppOutPacket);
-
-NDIS_STATUS RTMPAllocateNdisPacket(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PNDIS_PACKET    *pPacket,
-	IN  PUCHAR          pHeader,
-	IN  UINT            HeaderLen,
-	IN  PUCHAR          pData,
-	IN  UINT            DataLen);
-
-VOID RTMPFreeNdisPacket(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PNDIS_PACKET    pPacket);
-
-BOOLEAN RTMPFreeTXDUponTxDmaDone(
-	IN PRTMP_ADAPTER    pAd,
-	IN UCHAR            QueIdx);
-
-BOOLEAN RTMPCheckDHCPFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket);
-
-
-BOOLEAN RTMPCheckEtherType(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket);
-
-
-VOID RTMPCckBbpTuning(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UINT			TxRate);
-
-//
-// Private routines in rtmp_wep.c
-//
-VOID RTMPInitWepEngine(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pKey,
-	IN  UCHAR           KeyId,
-	IN  UCHAR           KeyLen,
-	IN  PUCHAR          pDest);
-
-VOID RTMPEncryptData(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pSrc,
-	IN  PUCHAR          pDest,
-	IN  UINT            Len);
-
-BOOLEAN	RTMPDecryptData(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	PUCHAR			pSrc,
-	IN	UINT			Len,
-	IN	UINT			idx);
-
-BOOLEAN	RTMPSoftDecryptWEP(
-	IN PRTMP_ADAPTER 	pAd,
-	IN PUCHAR			pData,
-	IN ULONG			DataByteCnt,
-	IN PCIPHER_KEY		pGroupKey);
-
-VOID RTMPSetICV(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pDest);
-
-VOID ARCFOUR_INIT(
-	IN  PARCFOURCONTEXT Ctx,
-	IN  PUCHAR          pKey,
-	IN  UINT            KeyLen);
-
-UCHAR   ARCFOUR_BYTE(
-	IN  PARCFOURCONTEXT     Ctx);
-
-VOID ARCFOUR_DECRYPT(
-	IN  PARCFOURCONTEXT Ctx,
-	IN  PUCHAR          pDest,
-	IN  PUCHAR          pSrc,
-	IN  UINT            Len);
-
-VOID ARCFOUR_ENCRYPT(
-	IN  PARCFOURCONTEXT Ctx,
-	IN  PUCHAR          pDest,
-	IN  PUCHAR          pSrc,
-	IN  UINT            Len);
-
-VOID WPAARCFOUR_ENCRYPT(
-	IN  PARCFOURCONTEXT Ctx,
-	IN  PUCHAR          pDest,
-	IN  PUCHAR          pSrc,
-	IN  UINT            Len);
-
-UINT RTMP_CALC_FCS32(
-	IN  UINT   Fcs,
-	IN  PUCHAR  Cp,
-	IN  INT     Len);
-
-//
-// MLME routines
-//
-
-// Asic/RF/BBP related functions
-
-VOID AsicAdjustTxPower(
-	IN PRTMP_ADAPTER pAd);
-
-VOID 	AsicUpdateProtect(
-	IN		PRTMP_ADAPTER	pAd,
-	IN 		USHORT			OperaionMode,
-	IN 		UCHAR			SetMask,
-	IN		BOOLEAN			bDisableBGProtect,
-	IN		BOOLEAN			bNonGFExist);
-
-VOID AsicSwitchChannel(
-	IN  PRTMP_ADAPTER   pAd,
-	IN	UCHAR			Channel,
-	IN	BOOLEAN			bScan);
-
-VOID AsicLockChannel(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR Channel) ;
-
-VOID AsicAntennaSelect(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR           Channel);
-
-VOID AsicAntennaSetting(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	ABGBAND_STATE	BandState);
-
-VOID AsicRfTuningExec(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-#ifdef CONFIG_STA_SUPPORT
-VOID AsicSleepThenAutoWakeup(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  USHORT TbttNumToNextWakeUp);
-
-VOID AsicForceSleep(
-	IN PRTMP_ADAPTER pAd);
-
-VOID AsicForceWakeup(
-	IN PRTMP_ADAPTER pAd,
-	IN BOOLEAN    bFromTx);
-#endif // CONFIG_STA_SUPPORT //
-
-VOID AsicSetBssid(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR pBssid);
-
-VOID AsicSetMcastWC(
-	IN PRTMP_ADAPTER pAd);
-
-#if 0	// removed by AlbertY
-VOID AsicSetBssidWC(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pBssid);
-#endif
-
-VOID AsicDelWcidTab(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR	Wcid);
-
-VOID AsicEnableRDG(
-	IN PRTMP_ADAPTER pAd);
-
-VOID AsicDisableRDG(
-	IN PRTMP_ADAPTER pAd);
-
-VOID AsicDisableSync(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID AsicEnableBssSync(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID AsicEnableIbssSync(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID AsicSetEdcaParm(
-	IN PRTMP_ADAPTER pAd,
-	IN PEDCA_PARM    pEdcaParm);
-
-VOID AsicSetSlotTime(
-	IN PRTMP_ADAPTER pAd,
-	IN BOOLEAN bUseShortSlotTime);
-
-#if 0
-VOID AsicAddWcidCipherEntry(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR		 WCID,
-	IN UCHAR		 BssIndex,
-	IN UCHAR		 KeyTable,
-	IN UCHAR		 CipherAlg,
-	IN PUCHAR		 pAddr,
-	IN CIPHER_KEY		 *pCipherKey);
-#endif
-
-VOID AsicAddSharedKeyEntry(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR         BssIndex,
-	IN UCHAR         KeyIdx,
-	IN UCHAR         CipherAlg,
-	IN PUCHAR        pKey,
-	IN PUCHAR        pTxMic,
-	IN PUCHAR        pRxMic);
-
-VOID AsicRemoveSharedKeyEntry(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR         BssIndex,
-	IN UCHAR         KeyIdx);
-
-VOID AsicUpdateWCIDAttribute(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT		WCID,
-	IN UCHAR		BssIndex,
-	IN UCHAR        CipherAlg,
-	IN BOOLEAN		bUsePairewiseKeyTable);
-
-VOID AsicUpdateWCIDIVEIV(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT		WCID,
-	IN ULONG        uIV,
-	IN ULONG        uEIV);
-
-VOID AsicUpdateRxWCIDTable(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT		WCID,
-	IN PUCHAR        pAddr);
-
-VOID AsicAddKeyEntry(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT		WCID,
-	IN UCHAR		BssIndex,
-	IN UCHAR		KeyIdx,
-	IN PCIPHER_KEY	pCipherKey,
-	IN BOOLEAN		bUsePairewiseKeyTable,
-	IN BOOLEAN		bTxKey);
-
-VOID AsicAddPairwiseKeyEntry(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR        pAddr,
-	IN UCHAR		WCID,
-	IN CIPHER_KEY		 *pCipherKey);
-
-VOID AsicRemovePairwiseKeyEntry(
-	IN PRTMP_ADAPTER  pAd,
-	IN UCHAR		 BssIdx,
-	IN UCHAR		 Wcid);
-
-BOOLEAN AsicSendCommandToMcu(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR         Command,
-	IN UCHAR         Token,
-	IN UCHAR         Arg0,
-	IN UCHAR         Arg1);
-
-
-VOID MacAddrRandomBssid(
-	IN  PRTMP_ADAPTER   pAd,
-	OUT PUCHAR pAddr);
-
-VOID MgtMacHeaderInit(
-	IN  PRTMP_ADAPTER     pAd,
-	IN OUT PHEADER_802_11 pHdr80211,
-	IN UCHAR SubType,
-	IN UCHAR ToDs,
-	IN PUCHAR pDA,
-	IN PUCHAR pBssid);
-
-VOID MlmeRadioOff(
-	IN PRTMP_ADAPTER pAd);
-
-VOID MlmeRadioOn(
-	IN PRTMP_ADAPTER pAd);
-
-
-VOID BssTableInit(
-	IN BSS_TABLE *Tab);
-
-#ifdef DOT11_N_SUPPORT
-VOID BATableInit(
-	IN PRTMP_ADAPTER pAd,
-    IN BA_TABLE *Tab);
-#endif // DOT11_N_SUPPORT //
-
-ULONG BssTableSearch(
-	IN BSS_TABLE *Tab,
-	IN PUCHAR pBssid,
-	IN UCHAR Channel);
-
-ULONG BssSsidTableSearch(
-	IN BSS_TABLE *Tab,
-	IN PUCHAR    pBssid,
-	IN PUCHAR    pSsid,
-	IN UCHAR     SsidLen,
-	IN UCHAR     Channel);
-
-ULONG BssTableSearchWithSSID(
-	IN BSS_TABLE *Tab,
-	IN PUCHAR    Bssid,
-	IN PUCHAR    pSsid,
-	IN UCHAR     SsidLen,
-	IN UCHAR     Channel);
-
-VOID BssTableDeleteEntry(
-	IN OUT  PBSS_TABLE pTab,
-	IN      PUCHAR pBssid,
-	IN      UCHAR Channel);
-
-#ifdef DOT11_N_SUPPORT
-VOID BATableDeleteORIEntry(
-	IN OUT	PRTMP_ADAPTER pAd,
-	IN		BA_ORI_ENTRY	*pBAORIEntry);
-
-VOID BATableDeleteRECEntry(
-	IN OUT	PRTMP_ADAPTER pAd,
-	IN		BA_REC_ENTRY	*pBARECEntry);
-
-VOID BATableTearORIEntry(
-	IN OUT	PRTMP_ADAPTER pAd,
-	IN		UCHAR TID,
-	IN		UCHAR Wcid,
-	IN		BOOLEAN bForceDelete,
-	IN		BOOLEAN ALL);
-
-VOID BATableTearRECEntry(
-	IN OUT	PRTMP_ADAPTER pAd,
-	IN		UCHAR TID,
-	IN		UCHAR WCID,
-	IN		BOOLEAN ALL);
-#endif // DOT11_N_SUPPORT //
-
-VOID  BssEntrySet(
-	IN  PRTMP_ADAPTER   pAd,
-	OUT PBSS_ENTRY pBss,
-	IN PUCHAR pBssid,
-	IN CHAR Ssid[],
-	IN UCHAR SsidLen,
-	IN UCHAR BssType,
-	IN USHORT BeaconPeriod,
-	IN PCF_PARM CfParm,
-	IN USHORT AtimWin,
-	IN USHORT CapabilityInfo,
-	IN UCHAR SupRate[],
-	IN UCHAR SupRateLen,
-	IN UCHAR ExtRate[],
-	IN UCHAR ExtRateLen,
-	IN HT_CAPABILITY_IE *pHtCapability,
-	IN ADD_HT_INFO_IE *pAddHtInfo,	// AP might use this additional ht info IE
-	IN UCHAR			HtCapabilityLen,
-	IN UCHAR			AddHtInfoLen,
-	IN UCHAR			NewExtChanOffset,
-	IN UCHAR Channel,
-	IN CHAR Rssi,
-	IN LARGE_INTEGER TimeStamp,
-	IN UCHAR CkipFlag,
-	IN PEDCA_PARM pEdcaParm,
-	IN PQOS_CAPABILITY_PARM pQosCapability,
-	IN PQBSS_LOAD_PARM pQbssLoad,
-	IN USHORT LengthVIE,
-	IN PNDIS_802_11_VARIABLE_IEs pVIE);
-
-ULONG  BssTableSetEntry(
-	IN  PRTMP_ADAPTER   pAd,
-	OUT PBSS_TABLE pTab,
-	IN PUCHAR pBssid,
-	IN CHAR Ssid[],
-	IN UCHAR SsidLen,
-	IN UCHAR BssType,
-	IN USHORT BeaconPeriod,
-	IN CF_PARM *CfParm,
-	IN USHORT AtimWin,
-	IN USHORT CapabilityInfo,
-	IN UCHAR SupRate[],
-	IN UCHAR SupRateLen,
-	IN UCHAR ExtRate[],
-	IN UCHAR ExtRateLen,
-	IN HT_CAPABILITY_IE *pHtCapability,
-	IN ADD_HT_INFO_IE *pAddHtInfo,	// AP might use this additional ht info IE
-	IN UCHAR			HtCapabilityLen,
-	IN UCHAR			AddHtInfoLen,
-	IN UCHAR			NewExtChanOffset,
-	IN UCHAR Channel,
-	IN CHAR Rssi,
-	IN LARGE_INTEGER TimeStamp,
-	IN UCHAR CkipFlag,
-	IN PEDCA_PARM pEdcaParm,
-	IN PQOS_CAPABILITY_PARM pQosCapability,
-	IN PQBSS_LOAD_PARM pQbssLoad,
-	IN USHORT LengthVIE,
-	IN PNDIS_802_11_VARIABLE_IEs pVIE);
-
-#ifdef DOT11_N_SUPPORT
-VOID BATableInsertEntry(
-    IN	PRTMP_ADAPTER	pAd,
-	IN USHORT Aid,
-    IN USHORT		TimeOutValue,
-	IN USHORT		StartingSeq,
-    IN UCHAR TID,
-	IN UCHAR BAWinSize,
-	IN UCHAR OriginatorStatus,
-    IN BOOLEAN IsRecipient);
-
-#ifdef DOT11N_DRAFT3
-VOID Bss2040CoexistTimeOut(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-
-VOID  TriEventInit(
-	IN	PRTMP_ADAPTER	pAd);
-
-ULONG TriEventTableSetEntry(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT TRIGGER_EVENT_TAB *Tab,
-	IN PUCHAR pBssid,
-	IN HT_CAPABILITY_IE *pHtCapability,
-	IN UCHAR			HtCapabilityLen,
-	IN UCHAR			RegClass,
-	IN UCHAR ChannelNo);
-
-VOID TriEventCounterMaintenance(
-	IN	PRTMP_ADAPTER	pAd);
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
-
-VOID BssTableSsidSort(
-	IN  PRTMP_ADAPTER   pAd,
-	OUT BSS_TABLE *OutTab,
-	IN  CHAR Ssid[],
-	IN  UCHAR SsidLen);
-
-VOID  BssTableSortByRssi(
-	IN OUT BSS_TABLE *OutTab);
-
-VOID BssCipherParse(
-	IN OUT  PBSS_ENTRY  pBss);
-
-NDIS_STATUS  MlmeQueueInit(
-	IN MLME_QUEUE *Queue);
-
-VOID  MlmeQueueDestroy(
-	IN MLME_QUEUE *Queue);
-
-BOOLEAN MlmeEnqueue(
-	IN PRTMP_ADAPTER pAd,
-	IN ULONG Machine,
-	IN ULONG MsgType,
-	IN ULONG MsgLen,
-	IN VOID *Msg);
-
-BOOLEAN MlmeEnqueueForRecv(
-	IN  PRTMP_ADAPTER   pAd,
-	IN ULONG Wcid,
-	IN ULONG TimeStampHigh,
-	IN ULONG TimeStampLow,
-	IN UCHAR Rssi0,
-	IN UCHAR Rssi1,
-	IN UCHAR Rssi2,
-	IN ULONG MsgLen,
-	IN PVOID Msg,
-	IN UCHAR Signal);
-
-
-BOOLEAN MlmeDequeue(
-	IN MLME_QUEUE *Queue,
-	OUT MLME_QUEUE_ELEM **Elem);
-
-VOID    MlmeRestartStateMachine(
-	IN  PRTMP_ADAPTER   pAd);
-
-BOOLEAN  MlmeQueueEmpty(
-	IN MLME_QUEUE *Queue);
-
-BOOLEAN  MlmeQueueFull(
-	IN MLME_QUEUE *Queue);
-
-BOOLEAN  MsgTypeSubst(
-	IN PRTMP_ADAPTER pAd,
-	IN PFRAME_802_11 pFrame,
-	OUT INT *Machine,
-	OUT INT *MsgType);
-
-VOID StateMachineInit(
-	IN STATE_MACHINE *Sm,
-	IN STATE_MACHINE_FUNC Trans[],
-	IN ULONG StNr,
-	IN ULONG MsgNr,
-	IN STATE_MACHINE_FUNC DefFunc,
-	IN ULONG InitState,
-	IN ULONG Base);
-
-VOID StateMachineSetAction(
-	IN STATE_MACHINE *S,
-	IN ULONG St,
-	ULONG Msg,
-	IN STATE_MACHINE_FUNC F);
-
-VOID StateMachinePerformAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN STATE_MACHINE *S,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID Drop(
-	IN  PRTMP_ADAPTER   pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID AssocStateMachineInit(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  STATE_MACHINE *Sm,
-	OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID ReassocTimeout(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-VOID AssocTimeout(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-VOID DisassocTimeout(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-//----------------------------------------------
-VOID MlmeDisassocReqAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID MlmeAssocReqAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID MlmeReassocReqAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID MlmeDisassocReqAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID PeerAssocRspAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID PeerReassocRspAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID PeerDisassocAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID DisassocTimeoutAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID AssocTimeoutAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID  ReassocTimeoutAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID  Cls3errAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR pAddr);
-
-VOID SwitchBetweenWepAndCkip(
-	IN PRTMP_ADAPTER pAd);
-
-VOID  InvalidStateWhenAssoc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID  InvalidStateWhenReassoc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID InvalidStateWhenDisassociate(
-	IN  PRTMP_ADAPTER pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-#ifdef RT2870
-VOID MlmeCntlConfirm(
-	IN PRTMP_ADAPTER pAd,
-	IN ULONG MsgType,
-	IN USHORT Msg);
-#endif // RT2870 //
-
-VOID  ComposePsPoll(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID  ComposeNullFrame(
-	IN  PRTMP_ADAPTER pAd);
-
-VOID  AssocPostProc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR pAddr2,
-	IN  USHORT CapabilityInfo,
-	IN  USHORT Aid,
-	IN  UCHAR SupRate[],
-	IN  UCHAR SupRateLen,
-	IN  UCHAR ExtRate[],
-	IN  UCHAR ExtRateLen,
-	IN PEDCA_PARM pEdcaParm,
-	IN HT_CAPABILITY_IE		*pHtCapability,
-	IN  UCHAR HtCapabilityLen,
-	IN ADD_HT_INFO_IE		*pAddHtInfo);
-
-VOID AuthStateMachineInit(
-	IN  PRTMP_ADAPTER   pAd,
-	IN PSTATE_MACHINE sm,
-	OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID AuthTimeout(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-VOID MlmeAuthReqAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID PeerAuthRspAtSeq2Action(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID PeerAuthRspAtSeq4Action(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID AuthTimeoutAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID Cls2errAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR pAddr);
-
-VOID MlmeDeauthReqAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID InvalidStateWhenAuth(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-//=============================================
-
-VOID AuthRspStateMachineInit(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PSTATE_MACHINE Sm,
-	IN  STATE_MACHINE_FUNC Trans[]);
-
-VOID PeerDeauthAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerAuthSimpleRspGenAndSend(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PHEADER_802_11  pHdr80211,
-	IN  USHORT Alg,
-	IN  USHORT Seq,
-	IN  USHORT Reason,
-	IN  USHORT Status);
-
-//
-// Private routines in dls.c
-//
-
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-void DlsStateMachineInit(
-    IN PRTMP_ADAPTER pAd,
-    IN STATE_MACHINE *Sm,
-    OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID MlmeDlsReqAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerDlsReqAction(
-    IN PRTMP_ADAPTER	pAd,
-    IN MLME_QUEUE_ELEM	*Elem);
-
-VOID PeerDlsRspAction(
-    IN PRTMP_ADAPTER	pAd,
-    IN MLME_QUEUE_ELEM	*Elem);
-
-VOID MlmeDlsTearDownAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerDlsTearDownAction(
-    IN PRTMP_ADAPTER	pAd,
-    IN MLME_QUEUE_ELEM	*Elem);
-
-VOID RTMPCheckDLSTimeOut(
-	IN PRTMP_ADAPTER	pAd);
-
-BOOLEAN RTMPRcvFrameDLSCheck(
-	IN PRTMP_ADAPTER	pAd,
-	IN PHEADER_802_11	pHeader,
-	IN ULONG			Len,
-	IN PRT28XX_RXD_STRUC	pRxD);
-
-INT	RTMPCheckDLSFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN  PUCHAR          pDA);
-
-VOID RTMPSendDLSTearDownFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN  PUCHAR          pDA);
-
-NDIS_STATUS RTMPSendSTAKeyRequest(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pDA);
-
-NDIS_STATUS RTMPSendSTAKeyHandShake(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pDA);
-
-VOID DlsTimeoutAction(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-BOOLEAN MlmeDlsReqSanity(
-	IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PRT_802_11_DLS *pDLS,
-    OUT PUSHORT pReason);
-
-INT Set_DlsEntryInfo_Display_Proc(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR arg);
-
-MAC_TABLE_ENTRY *MacTableInsertDlsEntry(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR	pAddr,
-	IN  UINT	DlsEntryIdx);
-
-BOOLEAN MacTableDeleteDlsEntry(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT wcid,
-	IN PUCHAR pAddr);
-
-MAC_TABLE_ENTRY *DlsEntryTableLookup(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR	pAddr,
-	IN BOOLEAN	bResetIdelCount);
-
-MAC_TABLE_ENTRY *DlsEntryTableLookupByWcid(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR	wcid,
-	IN PUCHAR	pAddr,
-	IN BOOLEAN	bResetIdelCount);
-
-INT	Set_DlsAddEntry_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_DlsTearDownEntry_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef QOS_DLS_SUPPORT
-BOOLEAN PeerDlsReqSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pDA,
-    OUT PUCHAR pSA,
-    OUT USHORT *pCapabilityInfo,
-    OUT USHORT *pDlsTimeout,
-    OUT UCHAR *pRatesLen,
-    OUT UCHAR Rates[],
-    OUT UCHAR *pHtCapabilityLen,
-    OUT HT_CAPABILITY_IE *pHtCapability);
-
-BOOLEAN PeerDlsRspSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pDA,
-    OUT PUCHAR pSA,
-    OUT USHORT *pCapabilityInfo,
-    OUT USHORT *pStatus,
-    OUT UCHAR *pRatesLen,
-    OUT UCHAR Rates[],
-    OUT UCHAR *pHtCapabilityLen,
-    OUT HT_CAPABILITY_IE *pHtCapability);
-
-BOOLEAN PeerDlsTearDownSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pDA,
-    OUT PUCHAR pSA,
-    OUT USHORT *pReason);
-#endif // QOS_DLS_SUPPORT //
-
-//========================================
-
-VOID SyncStateMachineInit(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  STATE_MACHINE *Sm,
-	OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID BeaconTimeout(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-VOID ScanTimeout(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-VOID MlmeScanReqAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID InvalidStateWhenScan(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID InvalidStateWhenJoin(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID InvalidStateWhenStart(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID PeerBeacon(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID EnqueueProbeRequest(
-	IN PRTMP_ADAPTER pAd);
-
-BOOLEAN ScanRunning(
-		IN PRTMP_ADAPTER pAd);
-//=========================================
-
-VOID MlmeCntlInit(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  STATE_MACHINE *S,
-	OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID MlmeCntlMachinePerformAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  STATE_MACHINE *S,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID CntlIdleProc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID CntlOidScanProc(
-	IN  PRTMP_ADAPTER pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID CntlOidSsidProc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM * Elem);
-
-VOID CntlOidRTBssidProc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM * Elem);
-
-VOID CntlMlmeRoamingProc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM * Elem);
-
-VOID CntlWaitDisassocProc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID CntlWaitJoinProc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID CntlWaitReassocProc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID CntlWaitStartProc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID CntlWaitAuthProc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID CntlWaitAuthProc2(
-	IN  PRTMP_ADAPTER pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID CntlWaitAssocProc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-#ifdef QOS_DLS_SUPPORT
-VOID CntlOidDLSSetupProc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-#endif // QOS_DLS_SUPPORT //
-
-VOID LinkUp(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR BssType);
-
-VOID LinkDown(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  BOOLEAN         IsReqFromAP);
-
-VOID IterateOnBssTab(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID IterateOnBssTab2(
-	IN  PRTMP_ADAPTER   pAd);;
-
-VOID JoinParmFill(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  OUT MLME_JOIN_REQ_STRUCT *JoinReq,
-	IN  ULONG BssIdx);
-
-VOID AssocParmFill(
-	IN  PRTMP_ADAPTER   pAd,
-	IN OUT MLME_ASSOC_REQ_STRUCT *AssocReq,
-	IN  PUCHAR pAddr,
-	IN  USHORT CapabilityInfo,
-	IN  ULONG Timeout,
-	IN  USHORT ListenIntv);
-
-VOID ScanParmFill(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  OUT MLME_SCAN_REQ_STRUCT *ScanReq,
-	IN  CHAR Ssid[],
-	IN  UCHAR SsidLen,
-	IN  UCHAR BssType,
-	IN  UCHAR ScanType);
-
-VOID DisassocParmFill(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  OUT MLME_DISASSOC_REQ_STRUCT *DisassocReq,
-	IN  PUCHAR pAddr,
-	IN  USHORT Reason);
-
-VOID StartParmFill(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  OUT MLME_START_REQ_STRUCT *StartReq,
-	IN  CHAR Ssid[],
-	IN  UCHAR SsidLen);
-
-VOID AuthParmFill(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  OUT MLME_AUTH_REQ_STRUCT *AuthReq,
-	IN  PUCHAR pAddr,
-	IN  USHORT Alg);
-
-VOID EnqueuePsPoll(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID EnqueueBeaconFrame(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID MlmeJoinReqAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID MlmeScanReqAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID MlmeStartReqAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID ScanTimeoutAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID BeaconTimeoutAtJoinAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID PeerBeaconAtScanAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID PeerBeaconAtJoinAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID PeerBeacon(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID PeerProbeReqAction(
-	IN  PRTMP_ADAPTER pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID ScanNextChannel(
-	IN  PRTMP_ADAPTER   pAd);
-
-ULONG MakeIbssBeacon(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID CCXAdjacentAPReport(
-	IN  PRTMP_ADAPTER   pAd);
-
-BOOLEAN MlmeScanReqSanity(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  VOID *Msg,
-	IN  ULONG MsgLen,
-	OUT UCHAR *BssType,
-	OUT CHAR ssid[],
-	OUT UCHAR *SsidLen,
-	OUT UCHAR *ScanType);
-
-BOOLEAN PeerBeaconAndProbeRspSanity(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  VOID *Msg,
-	IN  ULONG MsgLen,
-	IN  UCHAR MsgChannel,
-	OUT PUCHAR pAddr2,
-	OUT PUCHAR pBssid,
-	OUT CHAR Ssid[],
-	OUT UCHAR *pSsidLen,
-	OUT UCHAR *pBssType,
-	OUT USHORT *pBeaconPeriod,
-	OUT UCHAR *pChannel,
-	OUT UCHAR *pNewChannel,
-	OUT LARGE_INTEGER *pTimestamp,
-	OUT CF_PARM *pCfParm,
-	OUT USHORT *pAtimWin,
-	OUT USHORT *pCapabilityInfo,
-	OUT UCHAR *pErp,
-	OUT UCHAR *pDtimCount,
-	OUT UCHAR *pDtimPeriod,
-	OUT UCHAR *pBcastFlag,
-	OUT UCHAR *pMessageToMe,
-	OUT UCHAR SupRate[],
-	OUT UCHAR *pSupRateLen,
-	OUT UCHAR ExtRate[],
-	OUT UCHAR *pExtRateLen,
-	OUT	UCHAR *pCkipFlag,
-	OUT	UCHAR *pAironetCellPowerLimit,
-	OUT PEDCA_PARM       pEdcaParm,
-	OUT PQBSS_LOAD_PARM  pQbssLoad,
-	OUT PQOS_CAPABILITY_PARM pQosCapability,
-	OUT ULONG *pRalinkIe,
-	OUT UCHAR		 *pHtCapabilityLen,
-#ifdef CONFIG_STA_SUPPORT
-	OUT UCHAR		 *pPreNHtCapabilityLen,
-#endif // CONFIG_STA_SUPPORT //
-	OUT HT_CAPABILITY_IE *pHtCapability,
-	OUT UCHAR		 *AddHtInfoLen,
-	OUT ADD_HT_INFO_IE *AddHtInfo,
-	OUT UCHAR *NewExtChannel,
-	OUT USHORT *LengthVIE,
-	OUT PNDIS_802_11_VARIABLE_IEs pVIE);
-
-BOOLEAN PeerAddBAReqActionSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *pMsg,
-    IN ULONG MsgLen,
-	OUT PUCHAR pAddr2);
-
-BOOLEAN PeerAddBARspActionSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *pMsg,
-    IN ULONG MsgLen);
-
-BOOLEAN PeerDelBAActionSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN UCHAR Wcid,
-    IN VOID *pMsg,
-    IN ULONG MsgLen);
-
-BOOLEAN MlmeAssocReqSanity(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  VOID *Msg,
-	IN  ULONG MsgLen,
-	OUT PUCHAR pApAddr,
-	OUT USHORT *CapabilityInfo,
-	OUT ULONG *Timeout,
-	OUT USHORT *ListenIntv);
-
-BOOLEAN MlmeAuthReqSanity(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  VOID *Msg,
-	IN  ULONG MsgLen,
-	OUT PUCHAR pAddr,
-	OUT ULONG *Timeout,
-	OUT USHORT *Alg);
-
-BOOLEAN MlmeStartReqSanity(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  VOID *Msg,
-	IN  ULONG MsgLen,
-	OUT CHAR Ssid[],
-	OUT UCHAR *Ssidlen);
-
-BOOLEAN PeerAuthSanity(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  VOID *Msg,
-	IN  ULONG MsgLen,
-	OUT PUCHAR pAddr,
-	OUT USHORT *Alg,
-	OUT USHORT *Seq,
-	OUT USHORT *Status,
-	OUT CHAR ChlgText[]);
-
-BOOLEAN PeerAssocRspSanity(
-	IN  PRTMP_ADAPTER   pAd,
-    IN VOID *pMsg,
-	IN  ULONG MsgLen,
-	OUT PUCHAR pAddr2,
-	OUT USHORT *pCapabilityInfo,
-	OUT USHORT *pStatus,
-	OUT USHORT *pAid,
-	OUT UCHAR SupRate[],
-	OUT UCHAR *pSupRateLen,
-	OUT UCHAR ExtRate[],
-	OUT UCHAR *pExtRateLen,
-    OUT HT_CAPABILITY_IE		*pHtCapability,
-    OUT ADD_HT_INFO_IE		*pAddHtInfo,	// AP might use this additional ht info IE
-    OUT UCHAR			*pHtCapabilityLen,
-    OUT UCHAR			*pAddHtInfoLen,
-    OUT UCHAR			*pNewExtChannelOffset,
-	OUT PEDCA_PARM pEdcaParm,
-	OUT UCHAR *pCkipFlag);
-
-BOOLEAN PeerDisassocSanity(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  VOID *Msg,
-	IN  ULONG MsgLen,
-	OUT PUCHAR pAddr2,
-	OUT USHORT *Reason);
-
-BOOLEAN PeerWpaMessageSanity(
-    IN 	PRTMP_ADAPTER 		pAd,
-    IN 	PEAPOL_PACKET 		pMsg,
-    IN 	ULONG 				MsgLen,
-    IN 	UCHAR				MsgType,
-    IN 	MAC_TABLE_ENTRY  	*pEntry);
-
-BOOLEAN PeerDeauthSanity(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  VOID *Msg,
-	IN  ULONG MsgLen,
-	OUT PUCHAR pAddr2,
-	OUT USHORT *Reason);
-
-BOOLEAN PeerProbeReqSanity(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  VOID *Msg,
-	IN  ULONG MsgLen,
-	OUT PUCHAR pAddr2,
-	OUT CHAR Ssid[],
-	OUT UCHAR *pSsidLen);
-
-BOOLEAN GetTimBit(
-	IN  CHAR *Ptr,
-	IN  USHORT Aid,
-	OUT UCHAR *TimLen,
-	OUT UCHAR *BcastFlag,
-	OUT UCHAR *DtimCount,
-	OUT UCHAR *DtimPeriod,
-	OUT UCHAR *MessageToMe);
-
-UCHAR ChannelSanity(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR channel);
-
-NDIS_802_11_NETWORK_TYPE NetworkTypeInUseSanity(
-	IN PBSS_ENTRY pBss);
-
-#if 0	// It's omitted
-NDIS_STATUS	RTMPWepKeySanity(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	PVOID			pBuf);
-#endif
-
-BOOLEAN MlmeDelBAReqSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen);
-
-BOOLEAN MlmeAddBAReqSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pAddr2);
-
-ULONG MakeOutgoingFrame(
-	OUT CHAR *Buffer,
-	OUT ULONG *Length, ...);
-
-VOID  LfsrInit(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  ULONG Seed);
-
-UCHAR RandomByte(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID AsicUpdateAutoFallBackTable(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pTxRate);
-
-VOID  MlmePeriodicExec(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-VOID LinkDownExec(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-VOID LinkUpExec(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-VOID STAMlmePeriodicExec(
-	PRTMP_ADAPTER pAd);
-
-VOID MlmeAutoScan(
-	IN PRTMP_ADAPTER pAd);
-
-VOID MlmeAutoReconnectLastSSID(
-	IN PRTMP_ADAPTER pAd);
-
-BOOLEAN MlmeValidateSSID(
-	IN PUCHAR pSsid,
-	IN UCHAR  SsidLen);
-
-VOID MlmeCheckForRoaming(
-	IN PRTMP_ADAPTER pAd,
-	IN ULONG    Now32);
-
-VOID MlmeCheckForFastRoaming(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  ULONG           Now);
-
-VOID MlmeDynamicTxRateSwitching(
-	IN PRTMP_ADAPTER pAd);
-
-VOID MlmeSetTxRate(
-	IN PRTMP_ADAPTER		pAd,
-	IN PMAC_TABLE_ENTRY		pEntry,
-	IN PRTMP_TX_RATE_SWITCH	pTxRate);
-
-VOID MlmeSelectTxRateTable(
-	IN PRTMP_ADAPTER		pAd,
-	IN PMAC_TABLE_ENTRY		pEntry,
-	IN PUCHAR				*ppTable,
-	IN PUCHAR				pTableSize,
-	IN PUCHAR				pInitTxRateIdx);
-
-VOID MlmeCalculateChannelQuality(
-	IN PRTMP_ADAPTER pAd,
-	IN ULONG Now);
-
-VOID MlmeCheckPsmChange(
-	IN PRTMP_ADAPTER pAd,
-	IN ULONG    Now32);
-
-VOID MlmeSetPsmBit(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT psm);
-
-VOID MlmeSetTxPreamble(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT TxPreamble);
-
-VOID UpdateBasicRateBitmap(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID MlmeUpdateTxRates(
-	IN PRTMP_ADAPTER 	pAd,
-	IN 	BOOLEAN		 	bLinkUp,
-	IN	UCHAR			apidx);
-
-#ifdef DOT11_N_SUPPORT
-VOID MlmeUpdateHtTxRates(
-	IN PRTMP_ADAPTER 		pAd,
-	IN	UCHAR				apidx);
-#endif // DOT11_N_SUPPORT //
-
-VOID    RTMPCheckRates(
-	IN      PRTMP_ADAPTER   pAd,
-	IN OUT  UCHAR           SupRate[],
-	IN OUT  UCHAR           *SupRateLen);
-
-#ifdef CONFIG_STA_SUPPORT
-BOOLEAN RTMPCheckChannel(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR		CentralChannel,
-	IN UCHAR		Channel);
-#endif // CONFIG_STA_SUPPORT //
-
-BOOLEAN 	RTMPCheckHt(
-	IN		PRTMP_ADAPTER	pAd,
-	IN		UCHAR	Wcid,
-	IN OUT	HT_CAPABILITY_IE			*pHtCapability,
-	IN OUT	ADD_HT_INFO_IE			*pAddHtInfo);
-
-VOID StaQuickResponeForRateUpExec(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-VOID AsicBbpTuning1(
-	IN PRTMP_ADAPTER pAd);
-
-VOID AsicBbpTuning2(
-	IN PRTMP_ADAPTER pAd);
-
-VOID RTMPUpdateMlmeRate(
-	IN PRTMP_ADAPTER	pAd);
-
-CHAR RTMPMaxRssi(
-	IN PRTMP_ADAPTER	pAd,
-	IN CHAR				Rssi0,
-	IN CHAR				Rssi1,
-	IN CHAR				Rssi2);
-
-VOID AsicEvaluateRxAnt(
-	IN PRTMP_ADAPTER	pAd);
-
-VOID AsicRxAntEvalTimeout(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-VOID APSDPeriodicExec(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-BOOLEAN RTMPCheckEntryEnableAutoRateSwitch(
-	IN PRTMP_ADAPTER    pAd,
-	IN PMAC_TABLE_ENTRY	pEntry);
-
-UCHAR RTMPStaFixedTxMode(
-	IN PRTMP_ADAPTER    pAd,
-	IN PMAC_TABLE_ENTRY	pEntry);
-
-VOID RTMPUpdateLegacyTxSetting(
-		UCHAR				fixed_tx_mode,
-		PMAC_TABLE_ENTRY	pEntry);
-
-BOOLEAN RTMPAutoRateSwitchCheck(
-	IN PRTMP_ADAPTER    pAd);
-
-NDIS_STATUS MlmeInit(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID MlmeHandler(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID MlmeHalt(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID MlmeResetRalinkCounters(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID BuildChannelList(
-	IN PRTMP_ADAPTER pAd);
-
-UCHAR FirstChannel(
-	IN  PRTMP_ADAPTER   pAd);
-
-UCHAR NextChannel(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR channel);
-
-VOID ChangeToCellPowerLimit(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR         AironetCellPowerLimit);
-
-VOID RaiseClock(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UINT32 *x);
-
-VOID LowerClock(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UINT32 *x);
-
-USHORT ShiftInBits(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID ShiftOutBits(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  USHORT data,
-	IN  USHORT count);
-
-VOID EEpromCleanup(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID EWDS(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID EWEN(
-	IN  PRTMP_ADAPTER   pAd);
-
-USHORT RTMP_EEPROM_READ16(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  USHORT Offset);
-
-VOID RTMP_EEPROM_WRITE16(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  USHORT Offset,
-	IN  USHORT Data);
-
-//
-// Prototypes of function definition in rtmp_tkip.c
-//
-VOID    RTMPInitTkipEngine(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pTKey,
-	IN  UCHAR           KeyId,
-	IN  PUCHAR          pTA,
-	IN  PUCHAR          pMICKey,
-	IN  PUCHAR          pTSC,
-	OUT PULONG          pIV16,
-	OUT PULONG          pIV32);
-
-VOID    RTMPInitMICEngine(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pKey,
-	IN  PUCHAR          pDA,
-	IN  PUCHAR          pSA,
-	IN  UCHAR           UserPriority,
-	IN  PUCHAR          pMICKey);
-
-BOOLEAN RTMPTkipCompareMICValue(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pSrc,
-	IN  PUCHAR          pDA,
-	IN  PUCHAR          pSA,
-	IN  PUCHAR          pMICKey,
-	IN	UCHAR			UserPriority,
-	IN  UINT            Len);
-
-VOID    RTMPCalculateMICValue(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PNDIS_PACKET    pPacket,
-	IN  PUCHAR          pEncap,
-	IN  PCIPHER_KEY     pKey,
-	IN	UCHAR			apidx);
-
-BOOLEAN RTMPTkipCompareMICValueWithLLC(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pLLC,
-	IN  PUCHAR          pSrc,
-	IN  PUCHAR          pDA,
-	IN  PUCHAR          pSA,
-	IN  PUCHAR          pMICKey,
-	IN  UINT            Len);
-
-VOID    RTMPTkipAppendByte(
-	IN  PTKIP_KEY_INFO  pTkip,
-	IN  UCHAR           uChar);
-
-VOID    RTMPTkipAppend(
-	IN  PTKIP_KEY_INFO  pTkip,
-	IN  PUCHAR          pSrc,
-	IN  UINT            nBytes);
-
-VOID    RTMPTkipGetMIC(
-	IN  PTKIP_KEY_INFO  pTkip);
-
-BOOLEAN RTMPSoftDecryptTKIP(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR	pData,
-	IN ULONG	DataByteCnt,
-	IN UCHAR    UserPriority,
-	IN PCIPHER_KEY	pWpaKey);
-
-BOOLEAN RTMPSoftDecryptAES(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR	pData,
-	IN ULONG	DataByteCnt,
-	IN PCIPHER_KEY	pWpaKey);
-
-#if 0	// removed by AlbertY
-NDIS_STATUS RTMPWPAAddKeyProc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PVOID           pBuf);
-#endif
-
-//
-// Prototypes of function definition in cmm_info.c
-//
-NDIS_STATUS RTMPWPARemoveKeyProc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PVOID           pBuf);
-
-VOID    RTMPWPARemoveAllKeys(
-	IN  PRTMP_ADAPTER   pAd);
-
-BOOLEAN RTMPCheckStrPrintAble(
-    IN  CHAR *pInPutStr,
-    IN  UCHAR strLen);
-
-VOID    RTMPSetPhyMode(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  ULONG phymode);
-
-VOID	RTMPUpdateHTIE(
-	IN	RT_HT_CAPABILITY	*pRtHt,
-	IN		UCHAR				*pMcsSet,
-	OUT		HT_CAPABILITY_IE *pHtCapability,
-	OUT		ADD_HT_INFO_IE		*pAddHtInfo);
-
-VOID	RTMPAddWcidAttributeEntry(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			BssIdx,
-	IN 	UCHAR		 	KeyIdx,
-	IN 	UCHAR		 	CipherAlg,
-	IN 	MAC_TABLE_ENTRY *pEntry);
-
-CHAR *GetEncryptType(
-	CHAR enc);
-
-CHAR *GetAuthMode(
-	CHAR auth);
-
-VOID RTMPIoctlGetSiteSurvey(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq);
-
-VOID RTMPIoctlGetMacTable(
-	IN PRTMP_ADAPTER pAd,
-	IN struct iwreq *wrq);
-
-VOID RTMPIndicateWPA2Status(
-	IN  PRTMP_ADAPTER  pAdapter);
-
-VOID	RTMPOPModeSwitching(
-	IN	PRTMP_ADAPTER	pAd);
-
-#ifdef CONFIG_STA_SUPPORT
-VOID    RTMPAddBSSIDCipher(
-    IN  PRTMP_ADAPTER   pAd,
-	IN	UCHAR	Aid,
-    IN  PNDIS_802_11_KEY    pKey,
-    IN  UCHAR   CipherAlg);
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef DOT11_N_SUPPORT
-VOID	RTMPSetHT(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	OID_SET_HT_PHYMODE *pHTPhyMode);
-
-VOID	RTMPSetIndividualHT(
-	IN	PRTMP_ADAPTER		pAd,
-	IN	UCHAR				apidx);
-#endif // DOT11_N_SUPPORT //
-
-VOID RTMPSendWirelessEvent(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT			Event_flag,
-	IN	PUCHAR 			pAddr,
-	IN  UCHAR			BssIdx,
-	IN	CHAR			Rssi);
-
-VOID	NICUpdateCntlCounters(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PHEADER_802_11	pHeader,
-	IN    UCHAR			SubType,
-	IN	PRXWI_STRUC 	pRxWI);
-//
-// prototype in wpa.c
-//
-BOOLEAN WpaMsgTypeSubst(
-	IN  UCHAR   EAPType,
-	OUT INT		*MsgType);
-
-VOID WpaPskStateMachineInit(
-	IN  PRTMP_ADAPTER       pAd,
-	IN  STATE_MACHINE       *S,
-	OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID WpaEAPOLKeyAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID    WpaPairMsg1Action(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID    WpaPairMsg3Action(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID    WpaGroupMsg1Action(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID    WpaMacHeaderInit(
-	IN      PRTMP_ADAPTER   pAd,
-	IN OUT  PHEADER_802_11  pHdr80211,
-	IN      UCHAR           wep,
-	IN      PUCHAR          pAddr1);
-
-VOID    Wpa2PairMsg1Action(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  MLME_QUEUE_ELEM *Elem);
-
-VOID    Wpa2PairMsg3Action(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  MLME_QUEUE_ELEM *Elem);
-
-BOOLEAN ParseKeyData(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          pKeyData,
-    IN  UCHAR           KeyDataLen,
-	IN	UCHAR			bPairewise);
-
-VOID    RTMPToWirelessSta(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pHeader802_3,
-    IN  UINT            HdrLen,
-	IN  PUCHAR          pData,
-    IN  UINT            DataLen,
-    IN	BOOLEAN			is4wayFrame);
-
-VOID    HMAC_SHA1(
-	IN  UCHAR   *text,
-	IN  UINT    text_len,
-	IN  UCHAR   *key,
-	IN  UINT    key_len,
-	IN  UCHAR   *digest);
-
-VOID    PRF(
-	IN  UCHAR   *key,
-	IN  INT     key_len,
-	IN  UCHAR   *prefix,
-	IN  INT     prefix_len,
-	IN  UCHAR   *data,
-	IN  INT     data_len,
-	OUT UCHAR   *output,
-	IN  INT     len);
-
-VOID    CCKMPRF(
-	IN  UCHAR   *key,
-	IN  INT     key_len,
-	IN  UCHAR   *data,
-	IN  INT     data_len,
-	OUT UCHAR   *output,
-	IN  INT     len);
-
-VOID WpaCountPTK(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR   *PMK,
-	IN  UCHAR   *ANonce,
-	IN  UCHAR   *AA,
-	IN  UCHAR   *SNonce,
-	IN  UCHAR   *SA,
-	OUT UCHAR   *output,
-	IN  UINT    len);
-
-VOID    GenRandom(
-	IN  PRTMP_ADAPTER   pAd,
-	IN	UCHAR			*macAddr,
-	OUT	UCHAR			*random);
-
-//
-// prototype in aironet.c
-//
-VOID    AironetStateMachineInit(
-	IN  PRTMP_ADAPTER       pAd,
-	IN  STATE_MACHINE       *S,
-	OUT STATE_MACHINE_FUNC  Trans[]);
-
-VOID    AironetMsgAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID    AironetRequestAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID    ChannelLoadRequestAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR           Index);
-
-VOID    NoiseHistRequestAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR           Index);
-
-VOID    BeaconRequestAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR           Index);
-
-VOID    AironetReportAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID    ChannelLoadReportAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR           Index);
-
-VOID    NoiseHistReportAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR           Index);
-
-VOID    AironetFinalReportAction(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID    BeaconReportAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR           Index);
-
-VOID    AironetAddBeaconReport(
-	IN  PRTMP_ADAPTER       pAd,
-	IN  ULONG               Index,
-	IN  PMLME_QUEUE_ELEM    pElem);
-
-VOID    AironetCreateBeaconReportFromBssTable(
-	IN  PRTMP_ADAPTER       pAd);
-
-VOID    DBGPRINT_TX_RING(
-	IN PRTMP_ADAPTER  pAd,
-	IN UCHAR          QueIdx);
-
-VOID DBGPRINT_RX_RING(
-	IN PRTMP_ADAPTER  pAd);
-
-CHAR    ConvertToRssi(
-	IN PRTMP_ADAPTER  pAd,
-	IN CHAR				Rssi,
-	IN UCHAR    RssiNumber);
-
-
-#ifdef DOT11N_DRAFT3
-VOID BuildEffectedChannelList(
-	IN PRTMP_ADAPTER pAd);
-#endif // DOT11N_DRAFT3 //
-
-
-VOID APAsicEvaluateRxAnt(
-	IN PRTMP_ADAPTER	pAd);
-
-
-VOID APAsicRxAntEvalTimeout(
-	IN PRTMP_ADAPTER	pAd);
-
-//
-// function prototype in cmm_wpa.c
-//
-BOOLEAN RTMPCheckWPAframe(
-	IN PRTMP_ADAPTER pAd,
-	IN PMAC_TABLE_ENTRY	pEntry,
-	IN PUCHAR 			pData,
-	IN ULONG 			DataByteCount,
-	IN UCHAR			FromWhichBSSID);
-
-VOID AES_GTK_KEY_UNWRAP(
-	IN  UCHAR   *key,
-	OUT UCHAR   *plaintext,
-	IN	UCHAR	c_len,
-	IN  UCHAR   *ciphertext);
-
-BOOLEAN RTMPCheckRSNIE(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pData,
-	IN  UCHAR           DataLen,
-	IN  MAC_TABLE_ENTRY *pEntry,
-	OUT	UCHAR			*Offset);
-
-BOOLEAN RTMPParseEapolKeyData(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pKeyData,
-	IN  UCHAR           KeyDataLen,
-	IN	UCHAR			GroupKeyIndex,
-	IN	UCHAR			MsgType,
-	IN	BOOLEAN			bWPA2,
-	IN  MAC_TABLE_ENTRY *pEntry);
-
-VOID	ConstructEapolMsg(
-	IN 	PRTMP_ADAPTER    	pAd,
-    IN 	UCHAR				PeerAuthMode,
-    IN 	UCHAR				PeerWepStatus,
-    IN 	UCHAR				MyGroupKeyWepStatus,
-    IN 	UCHAR				MsgType,
-    IN	UCHAR				DefaultKeyIdx,
-    IN 	UCHAR				*ReplayCounter,
-	IN 	UCHAR				*KeyNonce,
-	IN	UCHAR				*TxRSC,
-	IN	UCHAR				*PTK,
-	IN	UCHAR				*GTK,
-	IN	UCHAR				*RSNIE,
-	IN	UCHAR				RSNIE_Len,
-    OUT PEAPOL_PACKET       pMsg);
-
-VOID	CalculateMIC(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			PeerWepStatus,
-	IN	UCHAR			*PTK,
-	OUT PEAPOL_PACKET   pMsg);
-
-NDIS_STATUS	RTMPSoftDecryptBroadCastData(
-	IN	PRTMP_ADAPTER					pAd,
-	IN	RX_BLK							*pRxBlk,
-	IN  NDIS_802_11_ENCRYPTION_STATUS 	GroupCipher,
-	IN  PCIPHER_KEY						pShard_key);
-
-VOID	ConstructEapolKeyData(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			PeerAuthMode,
-	IN	UCHAR			PeerWepStatus,
-	IN	UCHAR			GroupKeyWepStatus,
-	IN 	UCHAR			MsgType,
-	IN	UCHAR			DefaultKeyIdx,
-	IN	BOOLEAN			bWPA2Capable,
-	IN	UCHAR			*PTK,
-	IN	UCHAR			*GTK,
-	IN	UCHAR			*RSNIE,
-	IN	UCHAR			RSNIE_LEN,
-	OUT PEAPOL_PACKET   pMsg);
-
-VOID RTMPMakeRSNIE(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UINT            AuthMode,
-	IN  UINT            WepStatus,
-	IN	UCHAR			apidx);
-
-//
-// function prototype in ap_wpa.c
-//
-
-BOOLEAN APWpaMsgTypeSubst(
-	IN UCHAR    EAPType,
-	OUT INT *MsgType) ;
-
-MAC_TABLE_ENTRY *PACInquiry(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  ULONG           Wcid);
-
-BOOLEAN RTMPCheckMcast(
-	IN PRTMP_ADAPTER pAd,
-	IN PEID_STRUCT      eid_ptr,
-	IN MAC_TABLE_ENTRY  *pEntry);
-
-BOOLEAN RTMPCheckUcast(
-	IN PRTMP_ADAPTER pAd,
-	IN PEID_STRUCT      eid_ptr,
-	IN MAC_TABLE_ENTRY  *pEntry);
-
-BOOLEAN RTMPCheckAUTH(
-	IN PRTMP_ADAPTER pAd,
-	IN PEID_STRUCT      eid_ptr,
-	IN MAC_TABLE_ENTRY  *pEntry);
-
-VOID WPAStart4WayHS(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MAC_TABLE_ENTRY *pEntry,
-	IN	ULONG			TimeInterval);
-
-VOID WPAStart2WayGroupHS(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MAC_TABLE_ENTRY *pEntry);
-
-VOID APWpaEAPPacketAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID APWpaEAPOLStartAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID APWpaEAPOLLogoffAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID APWpaEAPOLKeyAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID APWpaEAPOLASFAlertAction(
-	IN  PRTMP_ADAPTER    pAd,
-	IN  MLME_QUEUE_ELEM  *Elem);
-
-VOID HandleCounterMeasure(
-	IN PRTMP_ADAPTER pAd,
-	IN MAC_TABLE_ENTRY  *pEntry);
-
-VOID PeerPairMsg2Action(
-	IN PRTMP_ADAPTER pAd,
-	IN MAC_TABLE_ENTRY  *pEntry,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerPairMsg4Action(
-	IN PRTMP_ADAPTER pAd,
-	IN MAC_TABLE_ENTRY  *pEntry,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID CMTimerExec(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-VOID WPARetryExec(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-VOID EnqueueStartForPSKExec(
-    IN PVOID SystemSpecific1,
-    IN PVOID FunctionContext,
-    IN PVOID SystemSpecific2,
-    IN PVOID SystemSpecific3);
-
-VOID RTMPHandleSTAKey(
-    IN PRTMP_ADAPTER    pAdapter,
-    IN MAC_TABLE_ENTRY  *pEntry,
-    IN MLME_QUEUE_ELEM  *Elem);
-
-#if 0 // merge into PeerPairMsg4Action
-VOID Wpa1PeerPairMsg4Action(
-	IN PRTMP_ADAPTER pAd,
-	IN MAC_TABLE_ENTRY  *pEntry,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID Wpa2PeerPairMsg4Action(
-	IN  PRTMP_ADAPTER    pAd,
-	IN  PMAC_TABLE_ENTRY pEntry,
-	IN  MLME_QUEUE_ELEM  *Elem);
-#endif // 0 //
-
-VOID PeerGroupMsg2Action(
-	IN  PRTMP_ADAPTER    pAd,
-	IN  PMAC_TABLE_ENTRY pEntry,
-	IN  VOID             *Msg,
-	IN  UINT             MsgLen);
-
-#if 0	// replaced by WPAStart2WayGroupHS
-NDIS_STATUS APWpaHardTransmit(
-	IN  PRTMP_ADAPTER    pAd,
-	IN  PMAC_TABLE_ENTRY pEntry);
-#endif // 0 //
-
-VOID PairDisAssocAction(
-	IN  PRTMP_ADAPTER    pAd,
-	IN  PMAC_TABLE_ENTRY pEntry,
-	IN  USHORT           Reason);
-
-VOID MlmeDeAuthAction(
-	IN  PRTMP_ADAPTER    pAd,
-	IN  PMAC_TABLE_ENTRY pEntry,
-	IN  USHORT           Reason);
-
-VOID GREKEYPeriodicExec(
-	IN  PVOID   SystemSpecific1,
-	IN  PVOID   FunctionContext,
-	IN  PVOID   SystemSpecific2,
-	IN  PVOID   SystemSpecific3);
-
-VOID CountGTK(
-	IN  UCHAR   *PMK,
-	IN  UCHAR   *GNonce,
-	IN  UCHAR   *AA,
-	OUT UCHAR   *output,
-	IN  UINT    len);
-
-VOID    GetSmall(
-	IN  PVOID   pSrc1,
-	IN  PVOID   pSrc2,
-	OUT PUCHAR  out,
-	IN  ULONG   Length);
-
-VOID    GetLarge(
-	IN  PVOID   pSrc1,
-	IN  PVOID   pSrc2,
-	OUT PUCHAR  out,
-	IN  ULONG   Length);
-
-VOID APGenRandom(
-	IN PRTMP_ADAPTER pAd,
-	OUT UCHAR       *random);
-
-VOID AES_GTK_KEY_WRAP(
-	IN UCHAR *key,
-	IN UCHAR *plaintext,
-	IN UCHAR p_len,
-	OUT UCHAR *ciphertext);
-
-VOID    WpaSend(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          pPacket,
-    IN  ULONG           Len);
-
-VOID    APToWirelessSta(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MAC_TABLE_ENTRY *pEntry,
-	IN  PUCHAR          pHeader802_3,
-	IN  UINT            HdrLen,
-	IN  PUCHAR          pData,
-	IN  UINT            DataLen,
-    IN	BOOLEAN			bClearFrame);
-
-VOID RTMPAddPMKIDCache(
-	IN  PRTMP_ADAPTER   		pAd,
-	IN	INT						apidx,
-	IN	PUCHAR				pAddr,
-	IN	UCHAR					*PMKID,
-	IN	UCHAR					*PMK);
-
-INT RTMPSearchPMKIDCache(
-	IN  PRTMP_ADAPTER   pAd,
-	IN	INT				apidx,
-	IN	PUCHAR		pAddr);
-
-VOID RTMPDeletePMKIDCache(
-	IN  PRTMP_ADAPTER   pAd,
-	IN	INT				apidx,
-	IN  INT				idx);
-
-VOID RTMPMaintainPMKIDCache(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID	RTMPSendTriggerFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PVOID			pBuffer,
-	IN	ULONG			Length,
-	IN  UCHAR           TxRate,
-	IN	BOOLEAN			bQosNull);
-
-
-//typedef void (*TIMER_FUNCTION)(unsigned long);
-
-
-/* timeout -- ms */
-VOID RTMP_SetPeriodicTimer(
-	IN	NDIS_MINIPORT_TIMER *pTimer,
-	IN	unsigned long timeout);
-
-VOID RTMP_OS_Init_Timer(
-	IN	PRTMP_ADAPTER pAd,
-	IN	NDIS_MINIPORT_TIMER *pTimer,
-	IN	TIMER_FUNCTION function,
-	IN	PVOID data);
-
-VOID RTMP_OS_Add_Timer(
-	IN	NDIS_MINIPORT_TIMER	*pTimer,
-	IN	unsigned long timeout);
-
-VOID RTMP_OS_Mod_Timer(
-	IN	NDIS_MINIPORT_TIMER	*pTimer,
-	IN	unsigned long timeout);
-
-
-VOID RTMP_OS_Del_Timer(
-	IN	NDIS_MINIPORT_TIMER	*pTimer,
-	OUT	BOOLEAN				 *pCancelled);
-
-
-VOID RTMP_OS_Release_Packet(
-	IN	PRTMP_ADAPTER pAd,
-	IN	PQUEUE_ENTRY  pEntry);
-
-VOID RTMPusecDelay(
-	IN	ULONG	usec);
-
-NDIS_STATUS os_alloc_mem(
-	IN	PRTMP_ADAPTER pAd,
-	OUT	PUCHAR *mem,
-	IN	ULONG  size);
-
-NDIS_STATUS os_free_mem(
-	IN	PRTMP_ADAPTER pAd,
-	IN	PUCHAR mem);
-
-
-void RTMP_AllocateSharedMemory(
-	IN	PRTMP_ADAPTER pAd,
-	IN	ULONG	Length,
-	IN	BOOLEAN	Cached,
-	OUT	PVOID	*VirtualAddress,
-	OUT	PNDIS_PHYSICAL_ADDRESS PhysicalAddress);
-
-VOID RTMPFreeTxRxRingMemory(
-    IN  PRTMP_ADAPTER   pAd);
-
-NDIS_STATUS AdapterBlockAllocateMemory(
-	IN PVOID	handle,
-	OUT	PVOID	*ppAd);
-
-void RTMP_AllocateTxDescMemory(
-	IN	PRTMP_ADAPTER pAd,
-	IN	UINT	Index,
-	IN	ULONG	Length,
-	IN	BOOLEAN	Cached,
-	OUT	PVOID	*VirtualAddress,
-	OUT	PNDIS_PHYSICAL_ADDRESS PhysicalAddress);
-
-void RTMP_AllocateFirstTxBuffer(
-	IN	PRTMP_ADAPTER pAd,
-	IN	UINT	Index,
-	IN	ULONG	Length,
-	IN	BOOLEAN	Cached,
-	OUT	PVOID	*VirtualAddress,
-	OUT	PNDIS_PHYSICAL_ADDRESS PhysicalAddress);
-
-void RTMP_AllocateMgmtDescMemory(
-	IN	PRTMP_ADAPTER pAd,
-	IN	ULONG	Length,
-	IN	BOOLEAN	Cached,
-	OUT	PVOID	*VirtualAddress,
-	OUT	PNDIS_PHYSICAL_ADDRESS PhysicalAddress);
-
-void RTMP_AllocateRxDescMemory(
-	IN	PRTMP_ADAPTER pAd,
-	IN	ULONG	Length,
-	IN	BOOLEAN	Cached,
-	OUT	PVOID	*VirtualAddress,
-	OUT	PNDIS_PHYSICAL_ADDRESS PhysicalAddress);
-
-PNDIS_PACKET RTMP_AllocateRxPacketBuffer(
-	IN	PRTMP_ADAPTER pAd,
-	IN	ULONG	Length,
-	IN	BOOLEAN	Cached,
-	OUT	PVOID	*VirtualAddress,
-	OUT	PNDIS_PHYSICAL_ADDRESS PhysicalAddress);
-
-PNDIS_PACKET RTMP_AllocateTxPacketBuffer(
-	IN	PRTMP_ADAPTER pAd,
-	IN	ULONG	Length,
-	IN	BOOLEAN	Cached,
-	OUT	PVOID	*VirtualAddress);
-
-PNDIS_PACKET RTMP_AllocateFragPacketBuffer(
-	IN	PRTMP_ADAPTER pAd,
-	IN	ULONG	Length);
-
-void RTMP_QueryPacketInfo(
-	IN  PNDIS_PACKET pPacket,
-	OUT PACKET_INFO  *pPacketInfo,
-	OUT PUCHAR		 *pSrcBufVA,
-	OUT	UINT		 *pSrcBufLen);
-
-void RTMP_QueryNextPacketInfo(
-	IN  PNDIS_PACKET *ppPacket,
-	OUT PACKET_INFO  *pPacketInfo,
-	OUT PUCHAR		 *pSrcBufVA,
-	OUT	UINT		 *pSrcBufLen);
-
-
-BOOLEAN RTMP_FillTxBlkInfo(
-	IN RTMP_ADAPTER *pAd,
-	IN TX_BLK *pTxBlk);
-
-
-PRTMP_SCATTER_GATHER_LIST
-rt_get_sg_list_from_packet(PNDIS_PACKET pPacket, RTMP_SCATTER_GATHER_LIST *sg);
-
-
- void announce_802_3_packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket);
-
-
-UINT BA_Reorder_AMSDU_Annnounce(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket);
-
-
-UINT Handle_AMSDU_Packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pData,
-	IN	ULONG			DataSize,
-	IN  UCHAR			FromWhichBSSID);
-
-
-void convert_802_11_to_802_3_packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket,
-	IN	PUCHAR			p8023hdr,
-	IN	PUCHAR			pData,
-	IN	ULONG			DataSize,
-	IN  UCHAR			FromWhichBSSID);
-
-
-PNET_DEV get_netdev_from_bssid(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			FromWhichBSSID);
-
-
-PNDIS_PACKET duplicate_pkt(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pHeader802_3,
-    IN  UINT            HdrLen,
-	IN	PUCHAR			pData,
-	IN	ULONG			DataSize,
-	IN	UCHAR			FromWhichBSSID);
-
-
-PNDIS_PACKET duplicate_pkt_with_TKIP_MIC(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pOldPkt);
-
-PNDIS_PACKET duplicate_pkt_with_VLAN(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pHeader802_3,
-    IN  UINT            HdrLen,
-	IN	PUCHAR			pData,
-	IN	ULONG			DataSize,
-	IN	UCHAR			FromWhichBSSID);
-
-PNDIS_PACKET duplicate_pkt_with_WPI(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket,
-	IN	UINT32			ext_head_len,
-	IN	UINT32			ext_tail_len);
-
-UCHAR VLAN_8023_Header_Copy(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pHeader802_3,
-	IN	UINT            HdrLen,
-	OUT PUCHAR			pData,
-	IN	UCHAR			FromWhichBSSID);
-
-#ifdef DOT11_N_SUPPORT
-void ba_flush_reordering_timeout_mpdus(
-	IN PRTMP_ADAPTER	pAd,
-	IN PBA_REC_ENTRY	pBAEntry,
-	IN ULONG			Now32);
-
-
-VOID BAOriSessionSetUp(
-			IN PRTMP_ADAPTER    pAd,
-			IN MAC_TABLE_ENTRY	*pEntry,
-			IN UCHAR			TID,
-			IN USHORT			TimeOut,
-			IN ULONG			DelayTime,
-			IN BOOLEAN		isForced);
-
-VOID BASessionTearDownALL(
-	IN OUT	PRTMP_ADAPTER pAd,
-	IN		UCHAR Wcid);
-#endif // DOT11_N_SUPPORT //
-
-BOOLEAN OS_Need_Clone_Packet(void);
-
-
-VOID build_tx_packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket,
-	IN	PUCHAR	pFrame,
-	IN	ULONG	FrameLen);
-
-
-VOID BAOriSessionTearDown(
-	IN OUT	PRTMP_ADAPTER	pAd,
-	IN		UCHAR			Wcid,
-	IN		UCHAR			TID,
-	IN		BOOLEAN			bPassive,
-	IN		BOOLEAN			bForceSend);
-
-VOID BARecSessionTearDown(
-	IN OUT	PRTMP_ADAPTER	pAd,
-	IN		UCHAR			Wcid,
-	IN		UCHAR			TID,
-	IN		BOOLEAN			bPassive);
-
-BOOLEAN ba_reordering_resource_init(PRTMP_ADAPTER pAd, int num);
-void ba_reordering_resource_release(PRTMP_ADAPTER pAd);
-
-ULONG AutoChBssInsertEntry(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pBssid,
-	IN CHAR Ssid[],
-	IN UCHAR SsidLen,
-	IN UCHAR ChannelNo,
-	IN CHAR Rssi);
-
-void AutoChBssTableInit(
-	IN PRTMP_ADAPTER pAd);
-
-void ChannelInfoInit(
-	IN PRTMP_ADAPTER pAd);
-
-void AutoChBssTableDestroy(
-	IN PRTMP_ADAPTER pAd);
-
-void ChannelInfoDestroy(
-	IN PRTMP_ADAPTER pAd);
-
-UCHAR New_ApAutoSelectChannel(
-	IN PRTMP_ADAPTER pAd);
-
-BOOLEAN rtstrmactohex(
-	IN char *s1,
-	IN char *s2);
-
-BOOLEAN rtstrcasecmp(
-	IN char *s1,
-	IN char *s2);
-
-char *rtstrstruncasecmp(
-	IN char *s1,
-	IN char *s2);
-
-char    *rtstrstr(
-	IN	const char * s1,
-	IN	const char * s2);
-
-char *rstrtok(
-	IN char * s,
-	IN const char * ct);
-
-int rtinet_aton(
-	const char *cp,
-	unsigned int *addr);
-
-////////// common ioctl functions //////////
-INT Set_DriverVersion_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_CountryRegion_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_CountryRegionABand_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_WirelessMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_Channel_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ShortSlot_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_TxPower_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_BGProtection_Proc(
-	IN  PRTMP_ADAPTER		pAd,
-	IN  PUCHAR			arg);
-
-INT Set_TxPreamble_Proc(
-	IN  PRTMP_ADAPTER		pAd,
-	IN  PUCHAR			arg);
-
-INT Set_RTSThreshold_Proc(
-	IN  PRTMP_ADAPTER		pAd,
-	IN  PUCHAR			arg);
-
-INT Set_FragThreshold_Proc(
-	IN  PRTMP_ADAPTER		pAd,
-	IN  PUCHAR			arg);
-
-INT Set_TxBurst_Proc(
-	IN  PRTMP_ADAPTER		pAd,
-	IN  PUCHAR			arg);
-
-#ifdef AGGREGATION_SUPPORT
-INT	Set_PktAggregate_Proc(
-	IN  PRTMP_ADAPTER		pAd,
-	IN  PUCHAR			arg);
-#endif
-
-INT	Set_IEEE80211H_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-#ifdef DBG
-INT	Set_Debug_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-#endif
-
-INT	Show_DescInfo_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ResetStatCounter_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-#ifdef DOT11_N_SUPPORT
-INT	Set_BASetup_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_BADecline_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_BAOriTearDown_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_BARecTearDown_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtBw_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtMcs_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtGi_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtOpMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtStbc_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtHtc_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtExtcha_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtMpduDensity_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtBaWinSize_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtRdg_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtLinkAdapt_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtAmsdu_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtAutoBa_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtProtect_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtMimoPs_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-
-INT	Set_ForceShortGI_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ForceGF_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	SetCommonHT(
-	IN	PRTMP_ADAPTER	pAd);
-
-INT	Set_SendPSMPAction_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtMIMOPSmode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-
-INT	Set_HtTxBASize_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-#endif // DOT11_N_SUPPORT //
-
-
-
-#ifdef CONFIG_STA_SUPPORT
-//Dls ,	kathy
-VOID RTMPSendDLSTearDownFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pDA);
-
-#ifdef DOT11_N_SUPPORT
-//Block ACK
-VOID QueryBATABLE(
-	IN  PRTMP_ADAPTER pAd,
-	OUT PQUERYBA_TABLE pBAT);
-#endif // DOT11_N_SUPPORT //
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-INT	    WpaCheckEapCode(
-	IN  PRTMP_ADAPTER   	pAd,
-	IN  PUCHAR				pFrame,
-	IN  USHORT				FrameLen,
-	IN  USHORT				OffSet);
-
-VOID    WpaSendMicFailureToWpaSupplicant(
-    IN  PRTMP_ADAPTER       pAd,
-    IN  BOOLEAN             bUnicast);
-
-VOID    SendAssocIEsToWpaSupplicant(
-    IN  PRTMP_ADAPTER       pAd);
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-int wext_notify_event_assoc(
-	IN  RTMP_ADAPTER *pAd);
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-
-#endif // CONFIG_STA_SUPPORT //
-
-
-
-#ifdef DOT11_N_SUPPORT
-VOID Handle_BSS_Width_Trigger_Events(
-	IN PRTMP_ADAPTER pAd);
-
-void build_ext_channel_switch_ie(
-	IN PRTMP_ADAPTER pAd,
-	IN HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE *pIE);
-#endif // DOT11_N_SUPPORT //
-
-
-BOOLEAN APRxDoneInterruptHandle(
-	IN	PRTMP_ADAPTER	pAd);
-
-BOOLEAN STARxDoneInterruptHandle(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	BOOLEAN			argc);
-
-#ifdef DOT11_N_SUPPORT
-// AMPDU packet indication
-VOID Indicate_AMPDU_Packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID);
-
-// AMSDU packet indication
-VOID Indicate_AMSDU_Packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID);
-#endif // DOT11_N_SUPPORT //
-
-// Normal legacy Rx packet indication
-VOID Indicate_Legacy_Packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID);
-
-VOID Indicate_EAPOL_Packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID);
-
-void  update_os_packet_info(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID);
-
-void wlan_802_11_to_802_3_packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN	PUCHAR			pHeader802_3,
-	IN  UCHAR			FromWhichBSSID);
-
-UINT deaggregate_AMSDU_announce(
-	IN	PRTMP_ADAPTER	pAd,
-	PNDIS_PACKET		pPacket,
-	IN	PUCHAR			pData,
-	IN	ULONG			DataSize);
-
-
-#ifdef CONFIG_STA_SUPPORT
-// remove LLC and get 802_3 Header
-#define  RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(_pRxBlk, _pHeader802_3)	\
-{																				\
-	PUCHAR _pRemovedLLCSNAP = NULL, _pDA, _pSA;                                 \
-																				\
-	if (RX_BLK_TEST_FLAG(_pRxBlk, fRX_MESH))                                    \
-	{                                                                           \
-		_pDA = _pRxBlk->pHeader->Addr3;                                         \
-		_pSA = (PUCHAR)_pRxBlk->pHeader + sizeof(HEADER_802_11);                \
-	}                                                                           \
-	else                                                                        \
-	{                                                                           \
-		if (RX_BLK_TEST_FLAG(_pRxBlk, fRX_INFRA))                              	\
-		{                                                                       \
-			_pDA = _pRxBlk->pHeader->Addr1;                                     \
-		if (RX_BLK_TEST_FLAG(_pRxBlk, fRX_DLS))									\
-			_pSA = _pRxBlk->pHeader->Addr2;										\
-		else																	\
-			_pSA = _pRxBlk->pHeader->Addr3;                                     \
-		}                                                                       \
-		else                                                                    \
-		{                                                                       \
-			_pDA = _pRxBlk->pHeader->Addr1;                                     \
-			_pSA = _pRxBlk->pHeader->Addr2;                                     \
-		}                                                                       \
-	}                                                                           \
-																				\
-	CONVERT_TO_802_3(_pHeader802_3, _pDA, _pSA, _pRxBlk->pData, 				\
-		_pRxBlk->DataSize, _pRemovedLLCSNAP);                                   \
-}
-#endif // CONFIG_STA_SUPPORT //
-
-
-BOOLEAN APFowardWirelessStaToWirelessSta(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket,
-	IN	ULONG			FromWhichBSSID);
-
-VOID Announce_or_Forward_802_3_Packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket,
-	IN	UCHAR			FromWhichBSSID);
-
-VOID Sta_Announce_or_Forward_802_3_Packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket,
-	IN	UCHAR			FromWhichBSSID);
-
-
-#ifdef CONFIG_STA_SUPPORT
-#define ANNOUNCE_OR_FORWARD_802_3_PACKET(_pAd, _pPacket, _FromWhichBSS)\
-			Sta_Announce_or_Forward_802_3_Packet(_pAd, _pPacket, _FromWhichBSS);
-			//announce_802_3_packet(_pAd, _pPacket);
-#endif // CONFIG_STA_SUPPORT //
-
-
-PNDIS_PACKET DuplicatePacket(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket,
-	IN	UCHAR			FromWhichBSSID);
-
-
-PNDIS_PACKET ClonePacket(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket,
-	IN	PUCHAR			pData,
-	IN	ULONG			DataSize);
-
-
-// Normal, AMPDU or AMSDU
-VOID CmmRxnonRalinkFrameIndicate(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID);
-
-VOID CmmRxRalinkFrameIndicate(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MAC_TABLE_ENTRY	*pEntry,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID);
-
-VOID Update_Rssi_Sample(
-	IN PRTMP_ADAPTER	pAd,
-	IN RSSI_SAMPLE		*pRssi,
-	IN PRXWI_STRUC		pRxWI);
-
-PNDIS_PACKET GetPacketFromRxRing(
-	IN		PRTMP_ADAPTER	pAd,
-	OUT		PRT28XX_RXD_STRUC		pSaveRxD,
-	OUT		BOOLEAN			*pbReschedule,
-	IN OUT	UINT32			*pRxPending);
-
-PNDIS_PACKET RTMPDeFragmentDataFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk);
-
-////////////////////////////////////////
-
-
-
-
-
-#ifdef SNMP_SUPPORT
-//for snmp , kathy
-typedef struct _DefaultKeyIdxValue
-{
-	UCHAR	KeyIdx;
-	UCHAR	Value[16];
-} DefaultKeyIdxValue, *PDefaultKeyIdxValue;
-#endif
-
-
-#ifdef CONFIG_STA_SUPPORT
-enum {
-	DIDmsg_lnxind_wlansniffrm		= 0x00000044,
-	DIDmsg_lnxind_wlansniffrm_hosttime	= 0x00010044,
-	DIDmsg_lnxind_wlansniffrm_mactime	= 0x00020044,
-	DIDmsg_lnxind_wlansniffrm_channel	= 0x00030044,
-	DIDmsg_lnxind_wlansniffrm_rssi		= 0x00040044,
-	DIDmsg_lnxind_wlansniffrm_sq		= 0x00050044,
-	DIDmsg_lnxind_wlansniffrm_signal	= 0x00060044,
-	DIDmsg_lnxind_wlansniffrm_noise		= 0x00070044,
-	DIDmsg_lnxind_wlansniffrm_rate		= 0x00080044,
-	DIDmsg_lnxind_wlansniffrm_istx		= 0x00090044,
-	DIDmsg_lnxind_wlansniffrm_frmlen	= 0x000A0044
-};
-enum {
-	P80211ENUM_msgitem_status_no_value	= 0x00
-};
-enum {
-	P80211ENUM_truth_false			= 0x00,
-	P80211ENUM_truth_true			= 0x01
-};
-
-/* Definition from madwifi */
-typedef struct {
-        UINT32 did;
-        UINT16 status;
-        UINT16 len;
-        UINT32 data;
-} p80211item_uint32_t;
-
-typedef struct {
-        UINT32 msgcode;
-        UINT32 msglen;
-#define WLAN_DEVNAMELEN_MAX 16
-        UINT8 devname[WLAN_DEVNAMELEN_MAX];
-        p80211item_uint32_t hosttime;
-        p80211item_uint32_t mactime;
-        p80211item_uint32_t channel;
-        p80211item_uint32_t rssi;
-        p80211item_uint32_t sq;
-        p80211item_uint32_t signal;
-        p80211item_uint32_t noise;
-        p80211item_uint32_t rate;
-        p80211item_uint32_t istx;
-        p80211item_uint32_t frmlen;
-} wlan_ng_prism2_header;
-
-/* The radio capture header precedes the 802.11 header. */
-typedef struct PACKED _ieee80211_radiotap_header {
-    UINT8	it_version;	/* Version 0. Only increases
-				 * for drastic changes,
-				 * introduction of compatible
-				 * new fields does not count.
-				 */
-    UINT8	it_pad;
-    UINT16     it_len;         /* length of the whole
-				 * header in bytes, including
-				 * it_version, it_pad,
-				 * it_len, and data fields.
-				 */
-    UINT32   it_present;	/* A bitmap telling which
-					 * fields are present. Set bit 31
-					 * (0x80000000) to extend the
-					 * bitmap by another 32 bits.
-					 * Additional extensions are made
-					 * by setting bit 31.
-					 */
-}ieee80211_radiotap_header ;
-
-enum ieee80211_radiotap_type {
-    IEEE80211_RADIOTAP_TSFT = 0,
-    IEEE80211_RADIOTAP_FLAGS = 1,
-    IEEE80211_RADIOTAP_RATE = 2,
-    IEEE80211_RADIOTAP_CHANNEL = 3,
-    IEEE80211_RADIOTAP_FHSS = 4,
-    IEEE80211_RADIOTAP_DBM_ANTSIGNAL = 5,
-    IEEE80211_RADIOTAP_DBM_ANTNOISE = 6,
-    IEEE80211_RADIOTAP_LOCK_QUALITY = 7,
-    IEEE80211_RADIOTAP_TX_ATTENUATION = 8,
-    IEEE80211_RADIOTAP_DB_TX_ATTENUATION = 9,
-    IEEE80211_RADIOTAP_DBM_TX_POWER = 10,
-    IEEE80211_RADIOTAP_ANTENNA = 11,
-    IEEE80211_RADIOTAP_DB_ANTSIGNAL = 12,
-    IEEE80211_RADIOTAP_DB_ANTNOISE = 13
-};
-
-#define WLAN_RADIOTAP_PRESENT (			\
-	(1 << IEEE80211_RADIOTAP_TSFT)	|	\
-	(1 << IEEE80211_RADIOTAP_FLAGS) |	\
-	(1 << IEEE80211_RADIOTAP_RATE)  | 	\
-	 0)
-
-typedef struct _wlan_radiotap_header {
-	ieee80211_radiotap_header wt_ihdr;
-	INT64 wt_tsft;
-	UINT8 wt_flags;
-	UINT8 wt_rate;
-} wlan_radiotap_header;
-/* Definition from madwifi */
-
-void send_monitor_packets(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk);
-
-#if WIRELESS_EXT >= 12
-// This function will be called when query /proc
-struct iw_statistics *rt28xx_get_wireless_stats(
-    IN struct net_device *net_dev);
-#endif
-
-VOID    RTMPSetDesiredRates(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  LONG            Rates);
-#endif // CONFIG_STA_SUPPORT //
-
-INT	Set_FixedTxMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-#ifdef CONFIG_APSTA_MIXED_SUPPORT
-INT	Set_OpMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-#endif // CONFIG_APSTA_MIXED_SUPPORT //
-
-static inline char* GetPhyMode(
-	int Mode)
-{
-	switch(Mode)
-	{
-		case MODE_CCK:
-			return "CCK";
-
-		case MODE_OFDM:
-			return "OFDM";
-#ifdef DOT11_N_SUPPORT
-		case MODE_HTMIX:
-			return "HTMIX";
-
-		case MODE_HTGREENFIELD:
-			return "GREEN";
-#endif // DOT11_N_SUPPORT //
-		default:
-			return "N/A";
-	}
-}
-
-
-static inline char* GetBW(
-	int BW)
-{
-	switch(BW)
-	{
-		case BW_10:
-			return "10M";
-
-		case BW_20:
-			return "20M";
-#ifdef DOT11_N_SUPPORT
-		case BW_40:
-			return "40M";
-#endif // DOT11_N_SUPPORT //
-		default:
-			return "N/A";
-	}
-}
-
-
-VOID RT28xxThreadTerminate(
-	IN RTMP_ADAPTER *pAd);
-
-BOOLEAN RT28XXChipsetCheck(
-	IN void *_dev_p);
-
-BOOLEAN RT28XXNetDevInit(
-	IN void 				*_dev_p,
-	IN struct  net_device	*net_dev,
-	IN RTMP_ADAPTER 		*pAd);
-
-BOOLEAN RT28XXProbePostConfig(
-	IN void 				*_dev_p,
-	IN RTMP_ADAPTER 		*pAd,
-	IN INT32				argc);
-
-VOID RT28XXDMADisable(
-	IN RTMP_ADAPTER 		*pAd);
-
-VOID RT28XXDMAEnable(
-	IN RTMP_ADAPTER 		*pAd);
-
-VOID RT28xx_UpdateBeaconToAsic(
-	IN RTMP_ADAPTER * pAd,
-	IN INT apidx,
-	IN ULONG BeaconLen,
-	IN ULONG UpdatePos);
-
-INT rt28xx_ioctl(
-	IN	struct net_device	*net_dev,
-	IN	OUT	struct ifreq	*rq,
-	IN	INT			cmd);
-
-
-#ifdef CONFIG_STA_SUPPORT
-INT rt28xx_sta_ioctl(
-	IN	struct net_device	*net_dev,
-	IN	OUT	struct ifreq	*rq,
-	IN	INT			cmd);
-#endif // CONFIG_STA_SUPPORT //
-
-BOOLEAN RT28XXSecurityKeyAdd(
-	IN		PRTMP_ADAPTER		pAd,
-	IN		ULONG				apidx,
-	IN		ULONG				KeyIdx,
-	IN		MAC_TABLE_ENTRY 	*pEntry);
-
-////////////////////////////////////////
-PNDIS_PACKET GetPacketFromRxRing(
-	IN		PRTMP_ADAPTER	pAd,
-	OUT		PRT28XX_RXD_STRUC	pSaveRxD,
-	OUT		BOOLEAN			*pbReschedule,
-	IN OUT	UINT32			*pRxPending);
-
-
-void kill_thread_task(PRTMP_ADAPTER pAd);
-
-void tbtt_tasklet(unsigned long data);
-
-
-VOID AsicTurnOffRFClk(
-	IN PRTMP_ADAPTER    pAd,
-	IN	UCHAR           Channel);
-
-VOID AsicTurnOnRFClk(
-	IN PRTMP_ADAPTER 	pAd,
-	IN	UCHAR			Channel);
-
-#ifdef RT2870
-//
-// Function Prototype in rtusb_bulk.c
-//
-VOID	RTUSBInitTxDesc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PTX_CONTEXT		pTxContext,
-	IN	UCHAR			BulkOutPipeId,
-	IN	usb_complete_t	Func);
-
-VOID	RTUSBInitHTTxDesc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PHT_TX_CONTEXT	pTxContext,
-	IN	UCHAR			BulkOutPipeId,
-	IN	ULONG			BulkOutSize,
-	IN	usb_complete_t	Func);
-
-VOID	RTUSBInitRxDesc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PRX_CONTEXT		pRxContext);
-
-VOID RTUSBCleanUpDataBulkOutQueue(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID RTUSBCancelPendingBulkOutIRP(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID RTUSBBulkOutDataPacket(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			BulkOutPipeId,
-	IN	UCHAR			Index);
-
-VOID RTUSBBulkOutNullFrame(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID RTUSBBulkOutRTSFrame(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID RTUSBCancelPendingBulkInIRP(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID RTUSBCancelPendingIRPs(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID RTUSBBulkOutMLMEPacket(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			Index);
-
-VOID RTUSBBulkOutPsPoll(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID RTUSBCleanUpMLMEBulkOutQueue(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID RTUSBKickBulkOut(
-	IN	PRTMP_ADAPTER pAd);
-
-VOID	RTUSBBulkReceive(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID DoBulkIn(
-	IN RTMP_ADAPTER *pAd);
-
-VOID RTUSBInitRxDesc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN  PRX_CONTEXT		pRxContext);
-
-VOID RTUSBBulkRxHandle(
-	IN unsigned long data);
-
-//
-// Function Prototype in rtusb_io.c
-//
-NTSTATUS RTUSBMultiRead(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT			Offset,
-	OUT	PUCHAR			pData,
-	IN	USHORT			length);
-
-NTSTATUS RTUSBMultiWrite(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT			Offset,
-	IN	PUCHAR			pData,
-	IN	USHORT			length);
-
-NTSTATUS RTUSBMultiWrite_OneByte(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT			Offset,
-	IN	PUCHAR			pData);
-
-NTSTATUS RTUSBReadBBPRegister(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			Id,
-	IN	PUCHAR			pValue);
-
-NTSTATUS RTUSBWriteBBPRegister(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			Id,
-	IN	UCHAR			Value);
-
-NTSTATUS RTUSBWriteRFRegister(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UINT32			Value);
-
-NTSTATUS	RT30xxWriteRFRegister(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			RegID,
-	IN	UCHAR			Value);
-
-NTSTATUS	RT30xxReadRFRegister(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			RegID,
-	IN	PUCHAR			pValue);
-
-NTSTATUS RTUSB_VendorRequest(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UINT32			TransferFlags,
-	IN	UCHAR			ReservedBits,
-	IN	UCHAR			Request,
-	IN	USHORT			Value,
-	IN	USHORT			Index,
-	IN	PVOID			TransferBuffer,
-	IN	UINT32			TransferBufferLength);
-
-NTSTATUS RTUSBReadEEPROM(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT			Offset,
-	OUT	PUCHAR			pData,
-	IN	USHORT			length);
-
-NTSTATUS RTUSBWriteEEPROM(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT			Offset,
-	IN	PUCHAR			pData,
-	IN	USHORT			length);
-
-VOID RTUSBPutToSleep(
-	IN	PRTMP_ADAPTER	pAd);
-
-NTSTATUS RTUSBWakeUp(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID RTUSBInitializeCmdQ(
-	IN	PCmdQ	cmdq);
-
-NDIS_STATUS	RTUSBEnqueueCmdFromNdis(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	NDIS_OID		Oid,
-	IN	BOOLEAN			SetInformation,
-	IN	PVOID			pInformationBuffer,
-	IN	UINT32			InformationBufferLength);
-
-NDIS_STATUS RTUSBEnqueueInternalCmd(
-	IN	PRTMP_ADAPTER	pAd,
-	IN NDIS_OID			Oid,
-	IN PVOID			pInformationBuffer,
-	IN UINT32			InformationBufferLength);
-
-VOID RTUSBDequeueCmd(
-	IN	PCmdQ		cmdq,
-	OUT	PCmdQElmt	*pcmdqelmt);
-
-INT RTUSBCmdThread(
-	IN OUT PVOID Context);
-
-INT TimerQThread(
-	IN OUT PVOID Context);
-
-RT2870_TIMER_ENTRY *RT2870_TimerQ_Insert(
-	IN RTMP_ADAPTER *pAd,
-	IN RALINK_TIMER_STRUCT *pTimer);
-
-BOOLEAN RT2870_TimerQ_Remove(
-	IN RTMP_ADAPTER *pAd,
-	IN RALINK_TIMER_STRUCT *pTimer);
-
-void RT2870_TimerQ_Exit(
-	IN RTMP_ADAPTER *pAd);
-
-void RT2870_TimerQ_Init(
-	IN RTMP_ADAPTER *pAd);
-
-VOID RT2870_BssBeaconExit(
-	IN RTMP_ADAPTER *pAd);
-
-VOID RT2870_BssBeaconStop(
-	IN RTMP_ADAPTER *pAd);
-
-VOID RT2870_BssBeaconStart(
-	IN RTMP_ADAPTER * pAd);
-
-VOID RT2870_BssBeaconInit(
-	IN RTMP_ADAPTER *pAd);
-
-VOID RT2870_WatchDog(
-	IN RTMP_ADAPTER *pAd);
-
-NTSTATUS RTUSBWriteMACRegister(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT			Offset,
-	IN	UINT32			Value);
-
-NTSTATUS RTUSBReadMACRegister(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT			Offset,
-	OUT	PUINT32			pValue);
-
-NTSTATUS RTUSBSingleWrite(
-	IN 	RTMP_ADAPTER 	*pAd,
-	IN	USHORT			Offset,
-	IN	USHORT			Value);
-
-NTSTATUS RTUSBFirmwareRun(
-	IN	PRTMP_ADAPTER	pAd);
-
-NTSTATUS RTUSBFirmwareWrite(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR		pFwImage,
-	IN ULONG		FwLen);
-
-NTSTATUS	RTUSBFirmwareOpmode(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUINT32			pValue);
-
-NTSTATUS	RTUSBVenderReset(
-	IN	PRTMP_ADAPTER	pAd);
-
-NDIS_STATUS RTUSBSetHardWareRegister(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	PVOID			pBuf);
-
-NDIS_STATUS RTUSBQueryHardWareRegister(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	PVOID			pBuf);
-
-VOID CMDHandler(
-    IN PRTMP_ADAPTER pAd);
-
-
-NDIS_STATUS	 CreateThreads(
-	IN	struct net_device *net_dev );
-
-
-VOID MacTableInitialize(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID MlmeSetPsm(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT psm);
-
-NDIS_STATUS RTMPWPAAddKeyProc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PVOID           pBuf);
-
-VOID AsicRxAntEvalAction(
-	IN PRTMP_ADAPTER pAd);
-
-#if 0 // Mark because not used in RT28xx.
-NTSTATUS RTUSBRxPacket(
-	IN	PRTMP_ADAPTER  pAd,
-	IN    BOOLEAN          bBulkReceive);
-
-VOID RTUSBDequeueMLMEPacket(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID RTUSBCleanUpMLMEWaitQueue(
-	IN	PRTMP_ADAPTER	pAd);
-#endif
-
-void append_pkt(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pHeader802_3,
-    IN  UINT            HdrLen,
-	IN	PUCHAR			pData,
-	IN	ULONG			DataSize,
-	OUT  PNDIS_PACKET	*ppPacket);
-
-UINT deaggregate_AMSDU_announce(
-	IN	PRTMP_ADAPTER	pAd,
-	PNDIS_PACKET		pPacket,
-	IN	PUCHAR			pData,
-	IN	ULONG			DataSize);
-
-NDIS_STATUS	RTMPCheckRxError(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PHEADER_802_11	pHeader,
-	IN	PRXWI_STRUC	pRxWI,
-	IN	PRT28XX_RXD_STRUC	pRxINFO);
-
-
-VOID RTUSBMlmeHardTransmit(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PMGMT_STRUC		pMgmt);
-
-INT MlmeThread(
-	IN PVOID Context);
-
-#if 0
-VOID    RTUSBResumeMsduTransmission(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID    RTUSBSuspendMsduTransmission(
-	IN	PRTMP_ADAPTER	pAd);
-#endif
-
-//
-// Function Prototype in rtusb_data.c
-//
-NDIS_STATUS	RTUSBFreeDescriptorRequest(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			BulkOutPipeId,
-	IN	UINT32			NumberRequired);
-
-
-BOOLEAN	RTUSBNeedQueueBackForAgg(
-	IN RTMP_ADAPTER *pAd,
-	IN UCHAR		BulkOutPipeId);
-
-
-VOID RTMPWriteTxInfo(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PTXINFO_STRUC 	pTxInfo,
-	IN	  USHORT		USBDMApktLen,
-	IN	  BOOLEAN		bWiv,
-	IN	  UCHAR			QueueSel,
-	IN	  UCHAR			NextValid,
-	IN	  UCHAR			TxBurst);
-
-//
-// Function Prototype in cmm_data_2870.c
-//
-USHORT RtmpUSB_WriteSubTxResource(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk,
-	IN	BOOLEAN			bIsLast,
-	OUT	USHORT			*FreeNumber);
-
-USHORT RtmpUSB_WriteSingleTxResource(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk,
-	IN	BOOLEAN			bIsLast,
-	OUT	USHORT			*FreeNumber);
-
-USHORT	RtmpUSB_WriteFragTxResource(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk,
-	IN	UCHAR			fragNum,
-	OUT	USHORT			*FreeNumber);
-
-USHORT RtmpUSB_WriteMultiTxResource(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk,
-	IN	UCHAR			frameNum,
-	OUT	USHORT			*FreeNumber);
-
-VOID RtmpUSB_FinalWriteTxResource(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk,
-	IN	USHORT			totalMPDUSize,
-	IN	USHORT			TxIdx);
-
-VOID RtmpUSBDataLastTxIdx(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			QueIdx,
-	IN	USHORT			TxIdx);
-
-VOID RtmpUSBDataKickOut(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk,
-	IN	UCHAR			QueIdx);
-
-
-int RtmpUSBMgmtKickOut(
-	IN RTMP_ADAPTER 	*pAd,
-	IN UCHAR 			QueIdx,
-	IN PNDIS_PACKET		pPacket,
-	IN PUCHAR			pSrcBufVA,
-	IN UINT 			SrcBufLen);
-
-VOID RtmpUSBNullFrameKickOut(
-	IN RTMP_ADAPTER *pAd,
-	IN UCHAR		QueIdx,
-	IN UCHAR		*pNullFrame,
-	IN UINT32		frameLen);
-
-VOID RT28xxUsbStaAsicForceWakeup(
-	IN PRTMP_ADAPTER pAd,
-	IN BOOLEAN       bFromTx);
-
-VOID RT28xxUsbStaAsicSleepThenAutoWakeup(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT TbttNumToNextWakeUp);
-
-VOID RT28xxUsbMlmeRadioOn(
-	IN PRTMP_ADAPTER pAd);
-
-VOID RT28xxUsbMlmeRadioOFF(
-	IN PRTMP_ADAPTER pAd);
-#endif // RT2870 //
-
-////////////////////////////////////////
-
-VOID QBSS_LoadInit(
- 	IN		RTMP_ADAPTER	*pAd);
-
-UINT32 QBSS_LoadElementAppend(
- 	IN		RTMP_ADAPTER	*pAd,
-	OUT		UINT8			*buf_p);
-
-VOID QBSS_LoadUpdate(
- 	IN		RTMP_ADAPTER	*pAd);
-
-///////////////////////////////////////
-INT RTMPShowCfgValue(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pName,
-	IN	PUCHAR			pBuf);
-
-PCHAR   RTMPGetRalinkAuthModeStr(
-    IN  NDIS_802_11_AUTHENTICATION_MODE authMode);
-
-PCHAR   RTMPGetRalinkEncryModeStr(
-    IN  USHORT encryMode);
-//////////////////////////////////////
-
-#ifdef CONFIG_STA_SUPPORT
-VOID AsicStaBbpTuning(
-	IN PRTMP_ADAPTER pAd);
-
-BOOLEAN StaAddMacTableEntry(
-	IN  PRTMP_ADAPTER		pAd,
-	IN  PMAC_TABLE_ENTRY	pEntry,
-	IN  UCHAR				MaxSupportedRateIn500Kbps,
-	IN  HT_CAPABILITY_IE	*pHtCapability,
-	IN  UCHAR				HtCapabilityLen,
-	IN  USHORT        		CapabilityInfo);
-#endif // CONFIG_STA_SUPPORT //
-
-void RTMP_IndicateMediaState(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID ReSyncBeaconTime(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID RTMPSetAGCInitValue(
-	IN PRTMP_ADAPTER	pAd,
-	IN UCHAR			BandWidth);
-
-int rt28xx_close(IN PNET_DEV dev);
-int rt28xx_open(IN PNET_DEV dev);
-
-__inline INT VIRTUAL_IF_UP(PRTMP_ADAPTER pAd)
-{
-extern VOID MeshMakeBeacon(IN PRTMP_ADAPTER pAd, IN UCHAR idx);
-extern VOID MeshUpdateBeaconFrame(IN PRTMP_ADAPTER pAd, IN UCHAR idx);
-
-	if (VIRTUAL_IF_NUM(pAd) == 0)
-	{
-		if (rt28xx_open(pAd->net_dev) != 0)
-			return -1;
-	}
-	else
-	{
-	}
-	VIRTUAL_IF_INC(pAd);
-	return 0;
-}
-
-__inline VOID VIRTUAL_IF_DOWN(PRTMP_ADAPTER pAd)
-{
-	VIRTUAL_IF_DEC(pAd);
-	if (VIRTUAL_IF_NUM(pAd) == 0)
-		rt28xx_close(pAd->net_dev);
-	return;
-}
-
-
-#endif  // __RTMP_H__
-
+#include "../rt2860/rtmp.h"
diff --git a/drivers/staging/rt2870/rtmp_ckipmic.h b/drivers/staging/rt2870/rtmp_ckipmic.h
index a3d949a39d3..0e7f1dfd454 100644
--- a/drivers/staging/rt2870/rtmp_ckipmic.h
+++ b/drivers/staging/rt2870/rtmp_ckipmic.h
@@ -1,113 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	rtmp_ckipmic.h
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Name		Date			Modification logs
-*/
-#ifndef	__RTMP_CKIPMIC_H__
-#define	__RTMP_CKIPMIC_H__
-
-typedef	struct	_MIC_CONTEXT	{
-	/* --- MMH context                            */
-	UCHAR		CK[16];				/* the key                                    */
-	UCHAR		coefficient[16];	/* current aes counter mode coefficients      */
-	ULONGLONG	accum;				/* accumulated mic, reduced to u32 in final() */
-	UINT		position;			/* current position (byte offset) in message  */
-	UCHAR		part[4];			/* for conversion of message to u32 for mmh   */
-}	MIC_CONTEXT, *PMIC_CONTEXT;
-
-VOID	CKIP_key_permute(
-	OUT	UCHAR	*PK,			/* output permuted key */
-	IN	UCHAR	*CK,			/* input CKIP key */
-	IN	UCHAR	toDsFromDs,		/* input toDs/FromDs bits */
-	IN	UCHAR	*piv);			/* input pointer to IV */
-
-VOID	RTMPCkipMicInit(
-	IN	PMIC_CONTEXT		pContext,
-	IN	PUCHAR				CK);
-
-VOID RTMPMicUpdate(
-    IN  PMIC_CONTEXT        pContext,
-    IN  PUCHAR              pOctets,
-    IN  INT                 len);
-
-ULONG RTMPMicGetCoefficient(
-    IN  PMIC_CONTEXT         pContext);
-
-VOID xor_128(
-    IN  PUCHAR              a,
-    IN  PUCHAR              b,
-    OUT PUCHAR              out);
-
-UCHAR RTMPCkipSbox(
-    IN  UCHAR               a);
-
-VOID xor_32(
-    IN  PUCHAR              a,
-    IN  PUCHAR              b,
-    OUT PUCHAR              out);
-
-VOID next_key(
-    IN  PUCHAR              key,
-    IN  INT                 round);
-
-VOID byte_sub(
-    IN  PUCHAR              in,
-    OUT PUCHAR              out);
-
-VOID shift_row(
-    IN  PUCHAR              in,
-    OUT PUCHAR              out);
-
-VOID mix_column(
-    IN  PUCHAR              in,
-    OUT PUCHAR              out);
-
-VOID RTMPAesEncrypt(
-    IN  PUCHAR              key,
-    IN  PUCHAR              data,
-    IN  PUCHAR              ciphertext);
-
-VOID RTMPMicFinal(
-    IN  PMIC_CONTEXT        pContext,
-    OUT UCHAR               digest[4]);
-
-VOID RTMPCkipInsertCMIC(
-    IN  PRTMP_ADAPTER   pAd,
-    OUT PUCHAR          pMIC,
-    IN  PUCHAR          p80211hdr,
-    IN  PNDIS_PACKET    pPacket,
-    IN  PCIPHER_KEY     pKey,
-    IN  PUCHAR          mic_snap);
-
-#endif //__RTMP_CKIPMIC_H__
+#include "../rt2860/rtmp_ckipmic.h"
diff --git a/drivers/staging/rt2870/rtmp_def.h b/drivers/staging/rt2870/rtmp_def.h
index c0f7561a9d9..839d791b4f6 100644
--- a/drivers/staging/rt2870/rtmp_def.h
+++ b/drivers/staging/rt2870/rtmp_def.h
@@ -1,1622 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-    rtmp_def.h
-
-    Abstract:
-    Miniport related definition header
-
-    Revision History:
-    Who         When          What
-    --------    ----------    ----------------------------------------------
-    Paul Lin    08-01-2002    created
-    John Chang  08-05-2003    add definition for 11g & other drafts
-*/
-#ifndef __RTMP_DEF_H__
-#define __RTMP_DEF_H__
-
-#include "oid.h"
-
-//
-//  Debug information verbosity: lower values indicate higher urgency
-//
-#define RT_DEBUG_OFF        0
-#define RT_DEBUG_ERROR      1
-#define RT_DEBUG_WARN       2
-#define RT_DEBUG_TRACE      3
-#define RT_DEBUG_INFO       4
-#define RT_DEBUG_LOUD       5
-
-#define NIC_TAG             ((ULONG)'0682')
-#define NIC_DBG_STRING      ("**RT28xx**")
-
-#ifdef SNMP_SUPPORT
-// for snmp
-// to get manufacturer OUI, kathy, 2008_0220
-#define ManufacturerOUI_LEN			3
-#define ManufacturerNAME			("Ralink Technology Company.")
-#define	ResourceTypeIdName			("Ralink_ID")
-#endif
-
-
-//#define PACKED
-
-#define RALINK_2883_VERSION		((UINT32)0x28830300)
-#define RALINK_2880E_VERSION	((UINT32)0x28720200)
-#define RALINK_3070_VERSION		((UINT32)0x30700200)
-
-//
-// NDIS version in use by the NIC driver.
-// The high byte is the major version. The low byte is the minor version.
-//
-#ifdef  NDIS51_MINIPORT
-#define NIC_DRIVER_VERSION      0x0501
-#else
-#define NIC_DRIVER_VERSION      0x0500
-#endif
-
-//
-// NDIS media type, current is ethernet, change if native wireless supported
-//
-#define NIC_MEDIA_TYPE          NdisMedium802_3
-#define NIC_PCI_HDR_LENGTH      0xe2
-#define NIC_MAX_PACKET_SIZE     2304
-#define NIC_HEADER_SIZE         14
-#define MAX_MAP_REGISTERS_NEEDED 32
-#define MIN_MAP_REGISTERS_NEEDED 2   //Todo: should consider fragment issue.
-
-//
-// interface type, we use PCI
-//
-#define NIC_INTERFACE_TYPE      NdisInterfacePci
-#define NIC_INTERRUPT_MODE      NdisInterruptLevelSensitive
-
-//
-// buffer size passed in NdisMQueryAdapterResources
-// We should only need three adapter resources (IO, interrupt and memory),
-// Some devices get extra resources, so have room for 10 resources
-//                    UF_SIZE   (sizeof(NDIS_RESOURCE_LIST) + (10*sizeof(CM_PARTIAL_RESOURCE_DESCRIPTOR)))
-
-
-#define NIC_RESOURCE_B//
-// IO space length
-//
-#define NIC_MAP_IOSPACE_LENGTH  sizeof(CSR_STRUC)
-
-#define MAX_RX_PKT_LEN	1520
-
-//
-// Entry number for each DMA descriptor ring
-//
-
-
-#ifdef RT2870
-#define TX_RING_SIZE            8 // 1
-#define PRIO_RING_SIZE          8
-#define MGMT_RING_SIZE       32 // PRIO_RING_SIZE
-#define RX_RING_SIZE            8
-#define MAX_TX_PROCESS          4
-#define LOCAL_TXBUF_SIZE        2048
-#endif // RT2870 //
-
-#ifdef MULTIPLE_CARD_SUPPORT
-// MC: Multple Cards
-#define MAX_NUM_OF_MULTIPLE_CARD		32
-#endif // MULTIPLE_CARD_SUPPORT //
-
-#define MAX_RX_PROCESS          128 //64 //32
-#define NUM_OF_LOCAL_TXBUF      2
-#define TXD_SIZE                16
-#define TXWI_SIZE               16
-#define RXD_SIZE               	16
-#define RXWI_SIZE             	16
-// TXINFO_SIZE + TXWI_SIZE + 802.11 Header Size + AMSDU sub frame header
-#define TX_DMA_1ST_BUFFER_SIZE  96    // only the 1st physical buffer is pre-allocated
-#define MGMT_DMA_BUFFER_SIZE    1536 //2048
-#define RX_BUFFER_AGGRESIZE     3840 //3904 //3968 //4096 //2048 //4096
-#define RX_BUFFER_NORMSIZE      3840 //3904 //3968 //4096 //2048 //4096
-#define TX_BUFFER_NORMSIZE		RX_BUFFER_NORMSIZE
-#define MAX_FRAME_SIZE          2346                    // Maximum 802.11 frame size
-#define MAX_AGGREGATION_SIZE    3840 //3904 //3968 //4096
-#define MAX_NUM_OF_TUPLE_CACHE  2
-#define MAX_MCAST_LIST_SIZE     32
-#define MAX_LEN_OF_VENDOR_DESC  64
-//#define MAX_SIZE_OF_MCAST_PSQ   (NUM_OF_LOCAL_TXBUF >> 2) // AP won't spend more than 1/4 of total buffers on M/BCAST PSQ
-#define MAX_SIZE_OF_MCAST_PSQ               32
-
-#define MAX_RX_PROCESS_CNT	(RX_RING_SIZE)
-
-
-#define MAX_PACKETS_IN_QUEUE				(512) //(512)    // to pass WMM A5-WPAPSK
-#define MAX_PACKETS_IN_MCAST_PS_QUEUE		32
-#define MAX_PACKETS_IN_PS_QUEUE				128	//32
-#define WMM_NUM_OF_AC                       4  /* AC0, AC1, AC2, and AC3 */
-
-
-
-// RxFilter
-#define STANORMAL	 0x17f97
-#define APNORMAL	 0x15f97
-//
-//  RTMP_ADAPTER flags
-//
-#define fRTMP_ADAPTER_MAP_REGISTER          0x00000001
-#define fRTMP_ADAPTER_INTERRUPT_IN_USE      0x00000002
-#define fRTMP_ADAPTER_HARDWARE_ERROR        0x00000004
-#define fRTMP_ADAPTER_SCATTER_GATHER        0x00000008
-#define fRTMP_ADAPTER_SEND_PACKET_ERROR     0x00000010
-#define fRTMP_ADAPTER_MLME_RESET_IN_PROGRESS 0x00000020
-#define fRTMP_ADAPTER_HALT_IN_PROGRESS      0x00000040
-#define fRTMP_ADAPTER_RESET_IN_PROGRESS     0x00000080
-#define fRTMP_ADAPTER_NIC_NOT_EXIST         0x00000100
-#define fRTMP_ADAPTER_TX_RING_ALLOCATED     0x00000200
-#define fRTMP_ADAPTER_REMOVE_IN_PROGRESS    0x00000400
-#define fRTMP_ADAPTER_MIMORATE_INUSED       0x00000800
-#define fRTMP_ADAPTER_RX_RING_ALLOCATED     0x00001000
-#define fRTMP_ADAPTER_INTERRUPT_ACTIVE      0x00002000
-#define fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS  0x00004000
-#define	fRTMP_ADAPTER_REASSOC_IN_PROGRESS	0x00008000
-#define	fRTMP_ADAPTER_MEDIA_STATE_PENDING	0x00010000
-#define	fRTMP_ADAPTER_RADIO_OFF				0x00020000
-#define fRTMP_ADAPTER_BULKOUT_RESET			0x00040000
-#define	fRTMP_ADAPTER_BULKIN_RESET			0x00080000
-#define fRTMP_ADAPTER_RDG_ACTIVE			0x00100000
-#define fRTMP_ADAPTER_DYNAMIC_BE_TXOP_ACTIVE 0x00200000
-#define fRTMP_ADAPTER_SCAN_2040 			0x04000000
-#define	fRTMP_ADAPTER_RADIO_MEASUREMENT		0x08000000
-
-#define fRTMP_ADAPTER_START_UP         		0x10000000	//Devive already initialized and enabled Tx/Rx.
-#define fRTMP_ADAPTER_MEDIA_STATE_CHANGE    0x20000000
-#define fRTMP_ADAPTER_IDLE_RADIO_OFF        0x40000000
-
-// Lock bit for accessing different ring buffers
-//#define fRTMP_ADAPTER_TX_RING_BUSY        0x80000000
-//#define fRTMP_ADAPTER_MGMT_RING_BUSY      0x40000000
-//#define fRTMP_ADAPTER_ATIM_RING_BUSY      0x20000000
-//#define fRTMP_ADAPTER_RX_RING_BUSY        0x10000000
-
-// Lock bit for accessing different queue
-//#define   fRTMP_ADAPTER_TX_QUEUE_BUSY     0x08000000
-//#define   fRTMP_ADAPTER_MGMT_QUEUE_BUSY   0x04000000
-
-//
-//  STA operation status flags
-//
-#define fOP_STATUS_INFRA_ON                 0x00000001
-#define fOP_STATUS_ADHOC_ON                 0x00000002
-#define fOP_STATUS_BG_PROTECTION_INUSED     0x00000004
-#define fOP_STATUS_SHORT_SLOT_INUSED        0x00000008
-#define fOP_STATUS_SHORT_PREAMBLE_INUSED    0x00000010
-#define fOP_STATUS_RECEIVE_DTIM             0x00000020
-//#define fOP_STATUS_TX_RATE_SWITCH_ENABLED   0x00000040
-#define fOP_STATUS_MEDIA_STATE_CONNECTED    0x00000080
-#define fOP_STATUS_WMM_INUSED               0x00000100
-#define fOP_STATUS_AGGREGATION_INUSED       0x00000200
-#define fOP_STATUS_DOZE                     0x00000400  // debug purpose
-#define fOP_STATUS_PIGGYBACK_INUSED         0x00000800  // piggy-back, and aggregation
-#define fOP_STATUS_APSD_INUSED				0x00001000
-#define fOP_STATUS_TX_AMSDU_INUSED			0x00002000
-#define fOP_STATUS_MAX_RETRY_ENABLED		0x00004000
-#define fOP_STATUS_WAKEUP_NOW               0x00008000
-#define fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE       0x00020000
-
-#ifdef DOT11N_DRAFT3
-#define fOP_STATUS_SCAN_2040               	    0x00040000
-#endif // DOT11N_DRAFT3 //
-
-#define CCKSETPROTECT		0x1
-#define OFDMSETPROTECT		0x2
-#define MM20SETPROTECT		0x4
-#define MM40SETPROTECT		0x8
-#define GF20SETPROTECT		0x10
-#define GR40SETPROTECT		0x20
-#define ALLN_SETPROTECT		(GR40SETPROTECT | GF20SETPROTECT | MM40SETPROTECT | MM20SETPROTECT)
-
-//
-//  AP's client table operation status flags
-//
-#define fCLIENT_STATUS_WMM_CAPABLE          0x00000001  // CLIENT can parse QOS DATA frame
-#define fCLIENT_STATUS_AGGREGATION_CAPABLE  0x00000002  // CLIENT can receive Ralink's proprietary TX aggregation frame
-#define fCLIENT_STATUS_PIGGYBACK_CAPABLE    0x00000004  // CLIENT support piggy-back
-#define fCLIENT_STATUS_AMSDU_INUSED			0x00000008
-#define fCLIENT_STATUS_SGI20_CAPABLE		0x00000010
-#define fCLIENT_STATUS_SGI40_CAPABLE		0x00000020
-#define fCLIENT_STATUS_TxSTBC_CAPABLE		0x00000040
-#define fCLIENT_STATUS_RxSTBC_CAPABLE		0x00000080
-#define fCLIENT_STATUS_HTC_CAPABLE			0x00000100
-#define fCLIENT_STATUS_RDG_CAPABLE			0x00000200
-#define fCLIENT_STATUS_MCSFEEDBACK_CAPABLE  0x00000400
-#define fCLIENT_STATUS_APSD_CAPABLE         0x00000800  /* UAPSD STATION */
-
-#ifdef DOT11N_DRAFT3
-#define fCLIENT_STATUS_BSSCOEXIST_CAPABLE	0x00001000
-#endif // DOT11N_DRAFT3 //
-
-#define fCLIENT_STATUS_RALINK_CHIPSET		0x00100000
-//
-//  STA configuration flags
-//
-//#define fSTA_CFG_ENABLE_TX_BURST          0x00000001
-
-// 802.11n Operating Mode Definition. 0-3 also used in ASICUPdateProtect switch case
-#define HT_NO_PROTECT	0
-#define HT_LEGACY_PROTECT	1
-#define HT_40_PROTECT	2
-#define HT_2040_PROTECT	3
-#define HT_RTSCTS_6M	7
-//following is our own definition in order to turn on our ASIC protection register in INFRASTRUCTURE.
-#define HT_ATHEROS	8	// rt2860c has problem with atheros chip. we need to turn on RTS/CTS .
-#define HT_FORCERTSCTS	9	// Force turn on RTS/CTS first. then go to evaluate if this force RTS is necessary.
-
-//
-// RX Packet Filter control flags. Apply on pAd->PacketFilter
-//
-#define fRX_FILTER_ACCEPT_DIRECT            NDIS_PACKET_TYPE_DIRECTED
-#define fRX_FILTER_ACCEPT_MULTICAST         NDIS_PACKET_TYPE_MULTICAST
-#define fRX_FILTER_ACCEPT_BROADCAST         NDIS_PACKET_TYPE_BROADCAST
-#define fRX_FILTER_ACCEPT_ALL_MULTICAST     NDIS_PACKET_TYPE_ALL_MULTICAST
-
-//
-// Error code section
-//
-// NDIS_ERROR_CODE_ADAPTER_NOT_FOUND
-#define ERRLOG_READ_PCI_SLOT_FAILED     0x00000101L
-#define ERRLOG_WRITE_PCI_SLOT_FAILED    0x00000102L
-#define ERRLOG_VENDOR_DEVICE_NOMATCH    0x00000103L
-
-// NDIS_ERROR_CODE_ADAPTER_DISABLED
-#define ERRLOG_BUS_MASTER_DISABLED      0x00000201L
-
-// NDIS_ERROR_CODE_UNSUPPORTED_CONFIGURATION
-#define ERRLOG_INVALID_SPEED_DUPLEX     0x00000301L
-#define ERRLOG_SET_SECONDARY_FAILED     0x00000302L
-
-// NDIS_ERROR_CODE_OUT_OF_RESOURCES
-#define ERRLOG_OUT_OF_MEMORY            0x00000401L
-#define ERRLOG_OUT_OF_SHARED_MEMORY     0x00000402L
-#define ERRLOG_OUT_OF_MAP_REGISTERS     0x00000403L
-#define ERRLOG_OUT_OF_BUFFER_POOL       0x00000404L
-#define ERRLOG_OUT_OF_NDIS_BUFFER       0x00000405L
-#define ERRLOG_OUT_OF_PACKET_POOL       0x00000406L
-#define ERRLOG_OUT_OF_NDIS_PACKET       0x00000407L
-#define ERRLOG_OUT_OF_LOOKASIDE_MEMORY  0x00000408L
-
-// NDIS_ERROR_CODE_HARDWARE_FAILURE
-#define ERRLOG_SELFTEST_FAILED          0x00000501L
-#define ERRLOG_INITIALIZE_ADAPTER       0x00000502L
-#define ERRLOG_REMOVE_MINIPORT          0x00000503L
-
-// NDIS_ERROR_CODE_RESOURCE_CONFLICT
-#define ERRLOG_MAP_IO_SPACE             0x00000601L
-#define ERRLOG_QUERY_ADAPTER_RESOURCES  0x00000602L
-#define ERRLOG_NO_IO_RESOURCE           0x00000603L
-#define ERRLOG_NO_INTERRUPT_RESOURCE    0x00000604L
-#define ERRLOG_NO_MEMORY_RESOURCE       0x00000605L
-
-
-// WDS definition
-#define	MAX_WDS_ENTRY               4
-#define WDS_PAIRWISE_KEY_OFFSET     60    // WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table
-
-#define	WDS_DISABLE_MODE            0
-#define	WDS_RESTRICT_MODE           1
-#define	WDS_BRIDGE_MODE             2
-#define	WDS_REPEATER_MODE           3
-#define	WDS_LAZY_MODE               4
-
-
-#define MAX_MESH_NUM				0
-
-#define MAX_APCLI_NUM				0
-#ifdef APCLI_SUPPORT
-#undef	MAX_APCLI_NUM
-#define MAX_APCLI_NUM				1
-#endif // APCLI_SUPPORT //
-
-#define MAX_MBSSID_NUM				1
-
-/* sanity check for apidx */
-#define MBSS_MR_APIDX_SANITY_CHECK(apidx) \
-    { if (apidx > MAX_MBSSID_NUM) { \
-          printk("%s> Error! apidx = %d > MAX_MBSSID_NUM!\n", __func__, apidx); \
-	  apidx = MAIN_MBSSID; } }
-
-#define VALID_WCID(_wcid)	((_wcid) > 0 && (_wcid) < MAX_LEN_OF_MAC_TABLE )
-
-#define MAIN_MBSSID                 0
-#define FIRST_MBSSID                1
-
-
-#define MAX_BEACON_SIZE				512
-// If the MAX_MBSSID_NUM is larger than 6,
-// it shall reserve some WCID space(wcid 222~253) for beacon frames.
-// -	these wcid 238~253 are reserved for beacon#6(ra6).
-// -	these wcid 222~237 are reserved for beacon#7(ra7).
-#if defined(MAX_MBSSID_NUM) && (MAX_MBSSID_NUM == 8)
-#define HW_RESERVED_WCID	222
-#elif defined(MAX_MBSSID_NUM) && (MAX_MBSSID_NUM == 7)
-#define HW_RESERVED_WCID	238
-#else
-#define HW_RESERVED_WCID	255
-#endif
-
-// Then dedicate wcid of DFS and Carrier-Sense.
-#define DFS_CTS_WCID 		(HW_RESERVED_WCID - 1)
-#define CS_CTS_WCID 		(HW_RESERVED_WCID - 2)
-#define LAST_SPECIFIC_WCID	(HW_RESERVED_WCID - 2)
-
-// If MAX_MBSSID_NUM is 8, the maximum available wcid for the associated STA is 211.
-// If MAX_MBSSID_NUM is 7, the maximum available wcid for the associated STA is 228.
-#define MAX_AVAILABLE_CLIENT_WCID	(LAST_SPECIFIC_WCID - MAX_MBSSID_NUM - 1)
-
-// TX need WCID to find Cipher Key
-// these wcid 212 ~ 219 are reserved for bc/mc packets if MAX_MBSSID_NUM is 8.
-#define GET_GroupKey_WCID(__wcid, __bssidx) \
-	{										\
-		__wcid = LAST_SPECIFIC_WCID - (MAX_MBSSID_NUM) + __bssidx;	\
-	}
-
-#define IsGroupKeyWCID(__wcid) (((__wcid) < LAST_SPECIFIC_WCID) && ((__wcid) >= (LAST_SPECIFIC_WCID - (MAX_MBSSID_NUM))))
-
-
-// definition to support multiple BSSID
-#define BSS0                            0
-#define BSS1                            1
-#define BSS2                            2
-#define BSS3                            3
-#define BSS4                            4
-#define BSS5                            5
-#define BSS6                            6
-#define BSS7                            7
-
-
-//============================================================
-// Length definitions
-#define PEER_KEY_NO                     2
-#define MAC_ADDR_LEN                    6
-#define TIMESTAMP_LEN                   8
-#define MAX_LEN_OF_SUPPORTED_RATES      MAX_LENGTH_OF_SUPPORT_RATES // 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
-#define MAX_LEN_OF_KEY                  32      // 32 octets == 256 bits, Redefine for WPA
-#define MAX_NUM_OF_CHANNELS             MAX_NUM_OF_CHS      // 14 channels @2.4G +  12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination
-#define MAX_NUM_OF_11JCHANNELS             20      // 14 channels @2.4G +  12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination
-#define MAX_LEN_OF_SSID                 32
-#define CIPHER_TEXT_LEN                 128
-#define HASH_TABLE_SIZE                 256
-#define MAX_VIE_LEN                     1024   // New for WPA cipher suite variable IE sizes.
-#define MAX_SUPPORT_MCS             32
-
-//============================================================
-// ASIC WCID Table definition.
-//============================================================
-#define BSSID_WCID		1	// in infra mode, always put bssid with this WCID
-#define MCAST_WCID	0x0
-#define BSS0Mcast_WCID	0x0
-#define BSS1Mcast_WCID	0xf8
-#define BSS2Mcast_WCID	0xf9
-#define BSS3Mcast_WCID	0xfa
-#define BSS4Mcast_WCID	0xfb
-#define BSS5Mcast_WCID	0xfc
-#define BSS6Mcast_WCID	0xfd
-#define BSS7Mcast_WCID	0xfe
-#define RESERVED_WCID		0xff
-
-#define MAX_NUM_OF_ACL_LIST				MAX_NUMBER_OF_ACL
-
-#define MAX_LEN_OF_MAC_TABLE            MAX_NUMBER_OF_MAC // if MAX_MBSSID_NUM is 8, this value can't be larger than 211
-
-#if MAX_LEN_OF_MAC_TABLE>MAX_AVAILABLE_CLIENT_WCID
-#error MAX_LEN_OF_MAC_TABLE can not be larger than MAX_AVAILABLE_CLIENT_WCID!!!!
-#endif
-
-#define MAX_NUM_OF_WDS_LINK_PERBSSID	            3
-#define MAX_NUM_OF_WDS_LINK	            (MAX_NUM_OF_WDS_LINK_PERBSSID*MAX_MBSSID_NUM)
-#define MAX_NUM_OF_EVENT                MAX_NUMBER_OF_EVENT
-#define WDS_LINK_START_WCID				(MAX_LEN_OF_MAC_TABLE-1)
-
-#define NUM_OF_TID			8
-#define MAX_AID_BA                    4
-#define MAX_LEN_OF_BA_REC_TABLE          ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2)//   (NUM_OF_TID*MAX_AID_BA + 32)	 //Block ACK recipient
-#define MAX_LEN_OF_BA_ORI_TABLE          ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2)//   (NUM_OF_TID*MAX_AID_BA + 32)   // Block ACK originator
-#define MAX_LEN_OF_BSS_TABLE             64
-#define MAX_REORDERING_MPDU_NUM			 512
-
-// key related definitions
-#define SHARE_KEY_NUM                   4
-#define MAX_LEN_OF_SHARE_KEY            16    // byte count
-#define MAX_LEN_OF_PEER_KEY             16    // byte count
-#define PAIRWISE_KEY_NUM                64    // in MAC ASIC pairwise key table
-#define GROUP_KEY_NUM                   4
-#define PMK_LEN                         32
-#define WDS_PAIRWISE_KEY_OFFSET         60    // WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table
-#define	PMKID_NO                        4     // Number of PMKID saved supported
-#define MAX_LEN_OF_MLME_BUFFER          2048
-
-// power status related definitions
-#define PWR_ACTIVE                      0
-#define PWR_SAVE                        1
-#define PWR_MMPS                        2			//MIMO power save
-//#define PWR_UNKNOWN                   2
-
-// Auth and Assoc mode related definitions
-#define AUTH_MODE_OPEN                  0x00
-#define AUTH_MODE_KEY                   0x01
-//#define AUTH_MODE_AUTO_SWITCH         0x03
-//#define AUTH_MODE_DEAUTH              0x04
-//#define AUTH_MODE_UPLAYER             0x05 // reserved for 802.11i use
-
-// BSS Type definitions
-#define BSS_ADHOC                       0  // = Ndis802_11IBSS
-#define BSS_INFRA                       1  // = Ndis802_11Infrastructure
-#define BSS_ANY                         2  // = Ndis802_11AutoUnknown
-#define BSS_MONITOR			            3  // = Ndis802_11Monitor
-
-
-// Reason code definitions
-#define REASON_RESERVED                 0
-#define REASON_UNSPECIFY                1
-#define REASON_NO_LONGER_VALID          2
-#define REASON_DEAUTH_STA_LEAVING       3
-#define REASON_DISASSOC_INACTIVE        4
-#define REASON_DISASSPC_AP_UNABLE       5
-#define REASON_CLS2ERR                  6
-#define REASON_CLS3ERR                  7
-#define REASON_DISASSOC_STA_LEAVING     8
-#define REASON_STA_REQ_ASSOC_NOT_AUTH   9
-#define REASON_INVALID_IE               13
-#define REASON_MIC_FAILURE              14
-#define REASON_4_WAY_TIMEOUT            15
-#define REASON_GROUP_KEY_HS_TIMEOUT     16
-#define REASON_IE_DIFFERENT             17
-#define REASON_MCIPHER_NOT_VALID        18
-#define REASON_UCIPHER_NOT_VALID        19
-#define REASON_AKMP_NOT_VALID           20
-#define REASON_UNSUPPORT_RSNE_VER       21
-#define REASON_INVALID_RSNE_CAP         22
-#define REASON_8021X_AUTH_FAIL          23
-#define REASON_CIPHER_SUITE_REJECTED    24
-#define REASON_DECLINED                 37
-
-#define REASON_QOS_UNSPECIFY              32
-#define REASON_QOS_LACK_BANDWIDTH         33
-#define REASON_POOR_CHANNEL_CONDITION     34
-#define REASON_QOS_OUTSIDE_TXOP_LIMITION  35
-#define REASON_QOS_QSTA_LEAVING_QBSS      36
-#define REASON_QOS_UNWANTED_MECHANISM     37
-#define REASON_QOS_MECH_SETUP_REQUIRED    38
-#define REASON_QOS_REQUEST_TIMEOUT        39
-#define REASON_QOS_CIPHER_NOT_SUPPORT     45
-
-// Status code definitions
-#define MLME_SUCCESS                    0
-#define MLME_UNSPECIFY_FAIL             1
-#define MLME_CANNOT_SUPPORT_CAP         10
-#define MLME_REASSOC_DENY_ASSOC_EXIST   11
-#define MLME_ASSOC_DENY_OUT_SCOPE       12
-#define MLME_ALG_NOT_SUPPORT            13
-#define MLME_SEQ_NR_OUT_OF_SEQUENCE     14
-#define MLME_REJ_CHALLENGE_FAILURE      15
-#define MLME_REJ_TIMEOUT                  16
-#define MLME_ASSOC_REJ_UNABLE_HANDLE_STA  17
-#define MLME_ASSOC_REJ_DATA_RATE          18
-
-#define MLME_ASSOC_REJ_NO_EXT_RATE        22
-#define MLME_ASSOC_REJ_NO_EXT_RATE_PBCC   23
-#define MLME_ASSOC_REJ_NO_CCK_OFDM        24
-
-#define MLME_QOS_UNSPECIFY                32
-#define MLME_REQUEST_DECLINED             37
-#define MLME_REQUEST_WITH_INVALID_PARAM   38
-#define MLME_DLS_NOT_ALLOW_IN_QBSS        48
-#define MLME_DEST_STA_NOT_IN_QBSS         49
-#define MLME_DEST_STA_IS_NOT_A_QSTA       50
-
-#define MLME_INVALID_FORMAT             0x51
-#define MLME_FAIL_NO_RESOURCE           0x52
-#define MLME_STATE_MACHINE_REJECT       0x53
-#define MLME_MAC_TABLE_FAIL             0x54
-
-// IE code
-#define IE_SSID                         0
-#define IE_SUPP_RATES                   1
-#define IE_FH_PARM                      2
-#define IE_DS_PARM                      3
-#define IE_CF_PARM                      4
-#define IE_TIM                          5
-#define IE_IBSS_PARM                    6
-#define IE_COUNTRY                      7     // 802.11d
-#define IE_802_11D_REQUEST              10    // 802.11d
-#define IE_QBSS_LOAD                    11    // 802.11e d9
-#define IE_EDCA_PARAMETER               12    // 802.11e d9
-#define IE_TSPEC                        13    // 802.11e d9
-#define IE_TCLAS                        14    // 802.11e d9
-#define IE_SCHEDULE                     15    // 802.11e d9
-#define IE_CHALLENGE_TEXT               16
-#define IE_POWER_CONSTRAINT             32    // 802.11h d3.3
-#define IE_POWER_CAPABILITY             33    // 802.11h d3.3
-#define IE_TPC_REQUEST                  34    // 802.11h d3.3
-#define IE_TPC_REPORT                   35    // 802.11h d3.3
-#define IE_SUPP_CHANNELS                36    // 802.11h d3.3
-#define IE_CHANNEL_SWITCH_ANNOUNCEMENT  37    // 802.11h d3.3
-#define IE_MEASUREMENT_REQUEST          38    // 802.11h d3.3
-#define IE_MEASUREMENT_REPORT           39    // 802.11h d3.3
-#define IE_QUIET                        40    // 802.11h d3.3
-#define IE_IBSS_DFS                     41    // 802.11h d3.3
-#define IE_ERP                          42    // 802.11g
-#define IE_TS_DELAY                     43    // 802.11e d9
-#define IE_TCLAS_PROCESSING             44    // 802.11e d9
-#define IE_QOS_CAPABILITY               46    // 802.11e d6
-#define IE_HT_CAP                       45    // 802.11n d1. HT CAPABILITY. ELEMENT ID TBD
-#define IE_AP_CHANNEL_REPORT			51    // 802.11k d6
-#define IE_HT_CAP2                         52    // 802.11n d1. HT CAPABILITY. ELEMENT ID TBD
-#define IE_RSN                          48    // 802.11i d3.0
-#define IE_WPA2                         48    // WPA2
-#define IE_EXT_SUPP_RATES               50    // 802.11g
-#define IE_SUPP_REG_CLASS               59    // 802.11y. Supported regulatory classes.
-#define IE_EXT_CHANNEL_SWITCH_ANNOUNCEMENT	60	// 802.11n
-#define IE_ADD_HT                         61    // 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD
-#define IE_ADD_HT2                        53    // 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD
-
-
-// For 802.11n D3.03
-//#define IE_NEW_EXT_CHA_OFFSET             62    // 802.11n d1. New extension channel offset elemet
-#define IE_SECONDARY_CH_OFFSET		62	// 802.11n D3.03	Secondary Channel Offset element
-#define IE_WAPI							68		// WAPI information element
-#define IE_2040_BSS_COEXIST               72    // 802.11n D3.0.3
-#define IE_2040_BSS_INTOLERANT_REPORT     73    // 802.11n D3.03
-#define IE_OVERLAPBSS_SCAN_PARM           74    // 802.11n D3.03
-#define IE_EXT_CAPABILITY                127   // 802.11n D3.03
-
-
-#define IE_WPA                          221   // WPA
-#define IE_VENDOR_SPECIFIC              221   // Wifi WMM (WME)
-
-#define OUI_BROADCOM_HT              51   //
-#define OUI_BROADCOM_HTADD              52   //
-#define OUI_PREN_HT_CAP              51   //
-#define OUI_PREN_ADD_HT              52   //
-
-// CCX information
-#define IE_AIRONET_CKIP                 133   // CCX1.0 ID 85H for CKIP
-#define IE_AP_TX_POWER                  150   // CCX 2.0 for AP transmit power
-#define IE_MEASUREMENT_CAPABILITY       221   // CCX 2.0
-#define IE_CCX_V2                       221
-#define IE_AIRONET_IPADDRESS            149   // CCX ID 95H for IP Address
-#define IE_AIRONET_CCKMREASSOC          156   // CCX ID 9CH for CCKM Reassociation Request element
-#define CKIP_NEGOTIATION_LENGTH         30
-#define AIRONET_IPADDRESS_LENGTH        10
-#define AIRONET_CCKMREASSOC_LENGTH      24
-
-// ========================================================
-// MLME state machine definition
-// ========================================================
-
-// STA MLME state mahcines
-#define ASSOC_STATE_MACHINE             1
-#define AUTH_STATE_MACHINE              2
-#define AUTH_RSP_STATE_MACHINE          3
-#define SYNC_STATE_MACHINE              4
-#define MLME_CNTL_STATE_MACHINE         5
-#define WPA_PSK_STATE_MACHINE           6
-#define LEAP_STATE_MACHINE              7
-#define AIRONET_STATE_MACHINE           8
-#define ACTION_STATE_MACHINE           9
-
-// AP MLME state machines
-#define AP_ASSOC_STATE_MACHINE          11
-#define AP_AUTH_STATE_MACHINE           12
-#define AP_AUTH_RSP_STATE_MACHINE       13
-#define AP_SYNC_STATE_MACHINE           14
-#define AP_CNTL_STATE_MACHINE           15
-#define AP_WPA_STATE_MACHINE            16
-
-#ifdef QOS_DLS_SUPPORT
-#define DLS_STATE_MACHINE               26
-#endif // QOS_DLS_SUPPORT //
-
-//
-// STA's CONTROL/CONNECT state machine: states, events, total function #
-//
-#define CNTL_IDLE                       0
-#define CNTL_WAIT_DISASSOC              1
-#define CNTL_WAIT_JOIN                  2
-#define CNTL_WAIT_REASSOC               3
-#define CNTL_WAIT_START                 4
-#define CNTL_WAIT_AUTH                  5
-#define CNTL_WAIT_ASSOC                 6
-#define CNTL_WAIT_AUTH2                 7
-#define CNTL_WAIT_OID_LIST_SCAN         8
-#define CNTL_WAIT_OID_DISASSOC          9
-#ifdef RT2870
-#define CNTL_WAIT_SCAN_FOR_CONNECT      10
-#endif // RT2870 //
-
-#define MT2_ASSOC_CONF                  34
-#define MT2_AUTH_CONF                   35
-#define MT2_DEAUTH_CONF                 36
-#define MT2_DISASSOC_CONF               37
-#define MT2_REASSOC_CONF                38
-#define MT2_PWR_MGMT_CONF               39
-#define MT2_JOIN_CONF                   40
-#define MT2_SCAN_CONF                   41
-#define MT2_START_CONF                  42
-#define MT2_GET_CONF                    43
-#define MT2_SET_CONF                    44
-#define MT2_RESET_CONF                  45
-#define MT2_MLME_ROAMING_REQ            52
-
-#define CNTL_FUNC_SIZE                  1
-
-//
-// STA's ASSOC state machine: states, events, total function #
-//
-#define ASSOC_IDLE                      0
-#define ASSOC_WAIT_RSP                  1
-#define REASSOC_WAIT_RSP                2
-#define DISASSOC_WAIT_RSP               3
-#define MAX_ASSOC_STATE                 4
-
-#define ASSOC_MACHINE_BASE              0
-#define MT2_MLME_ASSOC_REQ              0
-#define MT2_MLME_REASSOC_REQ            1
-#define MT2_MLME_DISASSOC_REQ           2
-#define MT2_PEER_DISASSOC_REQ           3
-#define MT2_PEER_ASSOC_REQ              4
-#define MT2_PEER_ASSOC_RSP              5
-#define MT2_PEER_REASSOC_REQ            6
-#define MT2_PEER_REASSOC_RSP            7
-#define MT2_DISASSOC_TIMEOUT            8
-#define MT2_ASSOC_TIMEOUT               9
-#define MT2_REASSOC_TIMEOUT             10
-#define MAX_ASSOC_MSG                   11
-
-#define ASSOC_FUNC_SIZE                 (MAX_ASSOC_STATE * MAX_ASSOC_MSG)
-
-//
-// ACT state machine: states, events, total function #
-//
-#define ACT_IDLE                      0
-#define MAX_ACT_STATE                 1
-
-#define ACT_MACHINE_BASE              0
-
-//Those PEER_xx_CATE number is based on real Categary value in IEEE spec. Please don'es modify it by your self.
-//Category
-#define MT2_PEER_SPECTRUM_CATE              0
-#define MT2_PEER_QOS_CATE              1
-#define MT2_PEER_DLS_CATE             2
-#define MT2_PEER_BA_CATE             3
-#define MT2_PEER_PUBLIC_CATE             4
-#define MT2_PEER_RM_CATE             5
-#define MT2_PEER_HT_CATE             7	//	7.4.7
-#define MAX_PEER_CATE_MSG                   7
-#define MT2_MLME_ADD_BA_CATE             8
-#define MT2_MLME_ORI_DELBA_CATE             9
-#define MT2_MLME_REC_DELBA_CATE             10
-#define MT2_MLME_QOS_CATE              11
-#define MT2_MLME_DLS_CATE             12
-#define MT2_ACT_INVALID             13
-#define MAX_ACT_MSG                   14
-
-//Category field
-#define CATEGORY_SPECTRUM		0
-#define CATEGORY_QOS			1
-#define CATEGORY_DLS			2
-#define CATEGORY_BA			3
-#define CATEGORY_PUBLIC		4
-#define CATEGORY_RM			5
-#define CATEGORY_HT			7
-
-
-// DLS Action frame definition
-#define ACTION_DLS_REQUEST			0
-#define ACTION_DLS_RESPONSE			1
-#define ACTION_DLS_TEARDOWN			2
-
-//Spectrum  Action field value 802.11h 7.4.1
-#define SPEC_MRQ	0	// Request
-#define SPEC_MRP	1	//Report
-#define SPEC_TPCRQ	2
-#define SPEC_TPCRP	3
-#define SPEC_CHANNEL_SWITCH	4
-
-
-//BA  Action field value
-#define ADDBA_REQ	0
-#define ADDBA_RESP	1
-#define DELBA   2
-
-//Public's  Action field value in Public Category.  Some in 802.11y and some in 11n
-#define ACTION_BSS_2040_COEXIST				0	// 11n
-#define ACTION_DSE_ENABLEMENT					1	// 11y D9.0
-#define ACTION_DSE_DEENABLEMENT				2	// 11y D9.0
-#define ACTION_DSE_REG_LOCATION_ANNOUNCE	3	// 11y D9.0
-#define ACTION_EXT_CH_SWITCH_ANNOUNCE		4	// 11y D9.0
-#define ACTION_DSE_MEASUREMENT_REQ			5	// 11y D9.0
-#define ACTION_DSE_MEASUREMENT_REPORT		6	// 11y D9.0
-#define ACTION_MEASUREMENT_PILOT_ACTION		7  	// 11y D9.0
-#define ACTION_DSE_POWER_CONSTRAINT			8	// 11y D9.0
-
-
-//HT  Action field value
-#define NOTIFY_BW_ACTION				0
-#define SMPS_ACTION						1
-#define PSMP_ACTION   					2
-#define SETPCO_ACTION					3
-#define MIMO_CHA_MEASURE_ACTION			4
-#define MIMO_N_BEACONFORM				5
-#define MIMO_BEACONFORM					6
-#define ANTENNA_SELECT					7
-#define HT_INFO_EXCHANGE				8
-
-#define ACT_FUNC_SIZE                 (MAX_ACT_STATE * MAX_ACT_MSG)
-//
-// STA's AUTHENTICATION state machine: states, evvents, total function #
-//
-#define AUTH_REQ_IDLE                   0
-#define AUTH_WAIT_SEQ2                  1
-#define AUTH_WAIT_SEQ4                  2
-#define MAX_AUTH_STATE                  3
-
-#define AUTH_MACHINE_BASE               0
-#define MT2_MLME_AUTH_REQ               0
-#define MT2_PEER_AUTH_EVEN              1
-#define MT2_AUTH_TIMEOUT                2
-#define MAX_AUTH_MSG                    3
-
-#define AUTH_FUNC_SIZE                  (MAX_AUTH_STATE * MAX_AUTH_MSG)
-
-//
-// STA's AUTH_RSP state machine: states, events, total function #
-//
-#define AUTH_RSP_IDLE                   0
-#define AUTH_RSP_WAIT_CHAL              1
-#define MAX_AUTH_RSP_STATE              2
-
-#define AUTH_RSP_MACHINE_BASE           0
-#define MT2_AUTH_CHALLENGE_TIMEOUT      0
-#define MT2_PEER_AUTH_ODD               1
-#define MT2_PEER_DEAUTH                 2
-#define MAX_AUTH_RSP_MSG                3
-
-#define AUTH_RSP_FUNC_SIZE              (MAX_AUTH_RSP_STATE * MAX_AUTH_RSP_MSG)
-
-//
-// STA's SYNC state machine: states, events, total function #
-//
-#define SYNC_IDLE                       0  // merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state
-#define JOIN_WAIT_BEACON                1
-#define SCAN_LISTEN                     2
-#define MAX_SYNC_STATE                  3
-
-#define SYNC_MACHINE_BASE               0
-#define MT2_MLME_SCAN_REQ               0
-#define MT2_MLME_JOIN_REQ               1
-#define MT2_MLME_START_REQ              2
-#define MT2_PEER_BEACON                 3
-#define MT2_PEER_PROBE_RSP              4
-#define MT2_PEER_ATIM                   5
-#define MT2_SCAN_TIMEOUT                6
-#define MT2_BEACON_TIMEOUT              7
-#define MT2_ATIM_TIMEOUT                8
-#define MT2_PEER_PROBE_REQ              9
-#define MAX_SYNC_MSG                    10
-
-#define SYNC_FUNC_SIZE                  (MAX_SYNC_STATE * MAX_SYNC_MSG)
-
-//Messages for the DLS state machine
-#define DLS_IDLE						0
-#define MAX_DLS_STATE					1
-
-#define DLS_MACHINE_BASE				0
-#define MT2_MLME_DLS_REQ			    0
-#define MT2_PEER_DLS_REQ			    1
-#define MT2_PEER_DLS_RSP			    2
-#define MT2_MLME_DLS_TEAR_DOWN		    3
-#define MT2_PEER_DLS_TEAR_DOWN		    4
-#define MAX_DLS_MSG				        5
-
-#define DLS_FUNC_SIZE					(MAX_DLS_STATE * MAX_DLS_MSG)
-
-//
-// STA's WPA-PSK State machine: states, events, total function #
-//
-#define WPA_PSK_IDLE					0
-#define MAX_WPA_PSK_STATE				1
-
-#define WPA_MACHINE_BASE                0
-#define MT2_EAPPacket                   0
-#define MT2_EAPOLStart                  1
-#define MT2_EAPOLLogoff                 2
-#define MT2_EAPOLKey                    3
-#define MT2_EAPOLASFAlert               4
-#define MAX_WPA_PSK_MSG                 5
-
-#define	WPA_PSK_FUNC_SIZE				(MAX_WPA_PSK_STATE * MAX_WPA_PSK_MSG)
-
-//
-// STA's CISCO-AIRONET State machine: states, events, total function #
-//
-#define AIRONET_IDLE					0
-#define	AIRONET_SCANNING				1
-#define MAX_AIRONET_STATE				2
-
-#define AIRONET_MACHINE_BASE		    0
-#define MT2_AIRONET_MSG				    0
-#define MT2_AIRONET_SCAN_REQ		    1
-#define MT2_AIRONET_SCAN_DONE		    2
-#define MAX_AIRONET_MSG				    3
-
-#define	AIRONET_FUNC_SIZE				(MAX_AIRONET_STATE * MAX_AIRONET_MSG)
-
-//
-// AP's CONTROL/CONNECT state machine: states, events, total function #
-//
-#define AP_CNTL_FUNC_SIZE               1
-
-//
-// AP's ASSOC state machine: states, events, total function #
-//
-#define AP_ASSOC_IDLE                   0
-#define AP_MAX_ASSOC_STATE              1
-
-#define AP_ASSOC_MACHINE_BASE           0
-#define APMT2_MLME_DISASSOC_REQ         0
-#define APMT2_PEER_DISASSOC_REQ         1
-#define APMT2_PEER_ASSOC_REQ            2
-#define APMT2_PEER_REASSOC_REQ          3
-#define APMT2_CLS3ERR                   4
-#define AP_MAX_ASSOC_MSG                5
-
-#define AP_ASSOC_FUNC_SIZE              (AP_MAX_ASSOC_STATE * AP_MAX_ASSOC_MSG)
-
-//
-// AP's AUTHENTICATION state machine: states, events, total function #
-//
-#define AP_AUTH_REQ_IDLE                0
-#define AP_MAX_AUTH_STATE               1
-
-#define AP_AUTH_MACHINE_BASE            0
-#define APMT2_MLME_DEAUTH_REQ           0
-#define APMT2_CLS2ERR                   1
-#define AP_MAX_AUTH_MSG                 2
-
-#define AP_AUTH_FUNC_SIZE               (AP_MAX_AUTH_STATE * AP_MAX_AUTH_MSG)
-
-//
-// AP's AUTH-RSP state machine: states, events, total function #
-//
-#define AP_AUTH_RSP_IDLE                0
-#define AP_MAX_AUTH_RSP_STATE           1
-
-#define AP_AUTH_RSP_MACHINE_BASE        0
-#define APMT2_AUTH_CHALLENGE_TIMEOUT    0
-#define APMT2_PEER_AUTH_ODD             1
-#define APMT2_PEER_DEAUTH               2
-#define AP_MAX_AUTH_RSP_MSG             3
-
-#define AP_AUTH_RSP_FUNC_SIZE           (AP_MAX_AUTH_RSP_STATE * AP_MAX_AUTH_RSP_MSG)
-
-//
-// AP's SYNC state machine: states, events, total function #
-//
-#define AP_SYNC_IDLE                    0
-#define AP_SCAN_LISTEN					1
-#define AP_MAX_SYNC_STATE               2
-
-#define AP_SYNC_MACHINE_BASE            0
-#define APMT2_PEER_PROBE_REQ            0
-#define APMT2_PEER_BEACON               1
-#define APMT2_MLME_SCAN_REQ				2
-#define APMT2_PEER_PROBE_RSP			3
-#define APMT2_SCAN_TIMEOUT				4
-#define APMT2_MLME_SCAN_CNCL			5
-#define AP_MAX_SYNC_MSG                 6
-
-#define AP_SYNC_FUNC_SIZE               (AP_MAX_SYNC_STATE * AP_MAX_SYNC_MSG)
-
-//
-// AP's WPA state machine: states, events, total function #
-//
-#define AP_WPA_PTK                      0
-#define AP_MAX_WPA_PTK_STATE            1
-
-#define AP_WPA_MACHINE_BASE             0
-#define APMT2_EAPPacket                 0
-#define APMT2_EAPOLStart                1
-#define APMT2_EAPOLLogoff               2
-#define APMT2_EAPOLKey                  3
-#define APMT2_EAPOLASFAlert             4
-#define AP_MAX_WPA_MSG                  5
-
-#define AP_WPA_FUNC_SIZE                (AP_MAX_WPA_PTK_STATE * AP_MAX_WPA_MSG)
-
-#ifdef APCLI_SUPPORT
-//ApCli authentication state machine
-#define APCLI_AUTH_REQ_IDLE                0
-#define APCLI_AUTH_WAIT_SEQ2               1
-#define APCLI_AUTH_WAIT_SEQ4               2
-#define APCLI_MAX_AUTH_STATE               3
-
-#define APCLI_AUTH_MACHINE_BASE            0
-#define APCLI_MT2_MLME_AUTH_REQ            0
-#define APCLI_MT2_MLME_DEAUTH_REQ          1
-#define APCLI_MT2_PEER_AUTH_EVEN           2
-#define APCLI_MT2_PEER_DEAUTH              3
-#define APCLI_MT2_AUTH_TIMEOUT             4
-#define APCLI_MAX_AUTH_MSG                 5
-
-#define APCLI_AUTH_FUNC_SIZE               (APCLI_MAX_AUTH_STATE * APCLI_MAX_AUTH_MSG)
-
-//ApCli association state machine
-#define APCLI_ASSOC_IDLE                   0
-#define APCLI_ASSOC_WAIT_RSP               1
-#define APCLI_MAX_ASSOC_STATE              2
-
-#define APCLI_ASSOC_MACHINE_BASE           0
-#define APCLI_MT2_MLME_ASSOC_REQ           0
-#define APCLI_MT2_MLME_DISASSOC_REQ        1
-#define APCLI_MT2_PEER_DISASSOC_REQ        2
-#define APCLI_MT2_PEER_ASSOC_RSP           3
-#define APCLI_MT2_ASSOC_TIMEOUT            4
-#define APCLI_MAX_ASSOC_MSG                5
-
-#define APCLI_ASSOC_FUNC_SIZE              (APCLI_MAX_ASSOC_STATE * APCLI_MAX_ASSOC_MSG)
-
-//ApCli sync state machine
-#define APCLI_SYNC_IDLE                   0  // merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state
-#define APCLI_JOIN_WAIT_PROBE_RSP         1
-#define APCLI_MAX_SYNC_STATE              2
-
-#define APCLI_SYNC_MACHINE_BASE           0
-#define APCLI_MT2_MLME_PROBE_REQ          0
-#define APCLI_MT2_PEER_PROBE_RSP          1
-#define APCLI_MT2_PROBE_TIMEOUT           2
-#define APCLI_MAX_SYNC_MSG                3
-
-#define APCLI_SYNC_FUNC_SIZE              (APCLI_MAX_SYNC_STATE * APCLI_MAX_SYNC_MSG)
-
-//ApCli ctrl state machine
-#define APCLI_CTRL_DISCONNECTED           0  // merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state
-#define APCLI_CTRL_PROBE                  1
-#define APCLI_CTRL_AUTH                   2
-#define APCLI_CTRL_AUTH_2                 3
-#define APCLI_CTRL_ASSOC                  4
-#define APCLI_CTRL_DEASSOC                5
-#define APCLI_CTRL_CONNECTED              6
-#define APCLI_MAX_CTRL_STATE              7
-
-#define APCLI_CTRL_MACHINE_BASE           0
-#define APCLI_CTRL_JOIN_REQ               0
-#define APCLI_CTRL_PROBE_RSP              1
-#define APCLI_CTRL_AUTH_RSP               2
-#define APCLI_CTRL_DISCONNECT_REQ         3
-#define APCLI_CTRL_PEER_DISCONNECT_REQ    4
-#define APCLI_CTRL_ASSOC_RSP              5
-#define APCLI_CTRL_DEASSOC_RSP            6
-#define APCLI_CTRL_JOIN_REQ_TIMEOUT       7
-#define APCLI_CTRL_AUTH_REQ_TIMEOUT       8
-#define APCLI_CTRL_ASSOC_REQ_TIMEOUT      9
-#define APCLI_MAX_CTRL_MSG                10
-
-#define APCLI_CTRL_FUNC_SIZE              (APCLI_MAX_CTRL_STATE * APCLI_MAX_CTRL_MSG)
-
-#if 0	// remove those variables by AlbertY
-// ApCli WPA state machine
-#define APCLI_WPA_PSK_IDLE				0
-#define APCLI_MAX_WPA_PSK_STATE			1
-
-// ApCli WPA MSG Type
-#define APCLI_WPA_MACHINE_BASE			0
-#define APCLI_MT2_EAPPacket				0
-#define APCLI_MT2_EAPOLStart			1
-#define APCLI_MT2_EAPOLLogoff			2
-#define APCLI_MT2_EAPOLKey				3
-#define APCLI_MT2_EAPOLASFAlert			4
-#define APCLI_MAX_WPA_PSK_MSG			5
-
-#define	APCLI_WPA_PSK_FUNC_SIZE			(APCLI_MAX_WPA_PSK_STATE * APCLI_MAX_WPA_PSK_MSG)
-#endif // end - 0 //
-
-#endif	// APCLI_SUPPORT //
-
-
-// =============================================================================
-
-// value domain of 802.11 header FC.Tyte, which is b3..b2 of the 1st-byte of MAC header
-#define BTYPE_MGMT                  0
-#define BTYPE_CNTL                  1
-#define BTYPE_DATA                  2
-
-// value domain of 802.11 MGMT frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
-#define SUBTYPE_ASSOC_REQ           0
-#define SUBTYPE_ASSOC_RSP           1
-#define SUBTYPE_REASSOC_REQ         2
-#define SUBTYPE_REASSOC_RSP         3
-#define SUBTYPE_PROBE_REQ           4
-#define SUBTYPE_PROBE_RSP           5
-#define SUBTYPE_BEACON              8
-#define SUBTYPE_ATIM                9
-#define SUBTYPE_DISASSOC            10
-#define SUBTYPE_AUTH                11
-#define SUBTYPE_DEAUTH              12
-#define SUBTYPE_ACTION              13
-#define SUBTYPE_ACTION_NO_ACK              14
-
-// value domain of 802.11 CNTL frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
-#define SUBTYPE_WRAPPER       	7
-#define SUBTYPE_BLOCK_ACK_REQ       8
-#define SUBTYPE_BLOCK_ACK           9
-#define SUBTYPE_PS_POLL             10
-#define SUBTYPE_RTS                 11
-#define SUBTYPE_CTS                 12
-#define SUBTYPE_ACK                 13
-#define SUBTYPE_CFEND               14
-#define SUBTYPE_CFEND_CFACK         15
-
-// value domain of 802.11 DATA frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
-#define SUBTYPE_DATA                0
-#define SUBTYPE_DATA_CFACK          1
-#define SUBTYPE_DATA_CFPOLL         2
-#define SUBTYPE_DATA_CFACK_CFPOLL   3
-#define SUBTYPE_NULL_FUNC           4
-#define SUBTYPE_CFACK               5
-#define SUBTYPE_CFPOLL              6
-#define SUBTYPE_CFACK_CFPOLL        7
-#define SUBTYPE_QDATA               8
-#define SUBTYPE_QDATA_CFACK         9
-#define SUBTYPE_QDATA_CFPOLL        10
-#define SUBTYPE_QDATA_CFACK_CFPOLL  11
-#define SUBTYPE_QOS_NULL            12
-#define SUBTYPE_QOS_CFACK           13
-#define SUBTYPE_QOS_CFPOLL          14
-#define SUBTYPE_QOS_CFACK_CFPOLL    15
-
-// ACK policy of QOS Control field bit 6:5
-#define NORMAL_ACK                  0x00  // b6:5 = 00
-#define NO_ACK                      0x20  // b6:5 = 01
-#define NO_EXPLICIT_ACK             0x40  // b6:5 = 10
-#define BLOCK_ACK                   0x60  // b6:5 = 11
-
-//
-// rtmp_data.c use these definition
-//
-#define LENGTH_802_11               24
-#define LENGTH_802_11_AND_H         30
-#define LENGTH_802_11_CRC_H         34
-#define LENGTH_802_11_CRC           28
-#define LENGTH_802_11_WITH_ADDR4    30
-#define LENGTH_802_3                14
-#define LENGTH_802_3_TYPE           2
-#define LENGTH_802_1_H              8
-#define LENGTH_EAPOL_H              4
-#define LENGTH_WMMQOS_H				2
-#define LENGTH_CRC                  4
-#define MAX_SEQ_NUMBER              0x0fff
-#define LENGTH_802_3_NO_TYPE		12
-#define LENGTH_802_1Q				4 /* VLAN related */
-
-// STA_CSR4.field.TxResult
-#define TX_RESULT_SUCCESS           0
-#define TX_RESULT_ZERO_LENGTH       1
-#define TX_RESULT_UNDER_RUN         2
-#define TX_RESULT_OHY_ERROR         4
-#define TX_RESULT_RETRY_FAIL        6
-
-// All PHY rate summary in TXD
-// Preamble MODE in TxD
-#define MODE_CCK	0
-#define MODE_OFDM   1
-#ifdef DOT11_N_SUPPORT
-#define MODE_HTMIX	2
-#define MODE_HTGREENFIELD	3
-#endif // DOT11_N_SUPPORT //
-// MCS for CCK.  BW.SGI.STBC are reserved
-#define MCS_LONGP_RATE_1                      0	 // long preamble CCK 1Mbps
-#define MCS_LONGP_RATE_2                      1	// long preamble CCK 1Mbps
-#define MCS_LONGP_RATE_5_5                    2
-#define MCS_LONGP_RATE_11                     3
-#define MCS_SHORTP_RATE_1                      4	 // long preamble CCK 1Mbps. short is forbidden in 1Mbps
-#define MCS_SHORTP_RATE_2                      5	// short preamble CCK 2Mbps
-#define MCS_SHORTP_RATE_5_5                    6
-#define MCS_SHORTP_RATE_11                     7
-// To send duplicate legacy OFDM. set BW=BW_40.  SGI.STBC are reserved
-#define MCS_RATE_6                      0   // legacy OFDM
-#define MCS_RATE_9                      1   // OFDM
-#define MCS_RATE_12                     2   // OFDM
-#define MCS_RATE_18                     3   // OFDM
-#define MCS_RATE_24                     4  // OFDM
-#define MCS_RATE_36                     5   // OFDM
-#define MCS_RATE_48                     6  // OFDM
-#define MCS_RATE_54                     7 // OFDM
-// HT
-#define MCS_0		0	// 1S
-#define MCS_1		1
-#define MCS_2		2
-#define MCS_3		3
-#define MCS_4		4
-#define MCS_5		5
-#define MCS_6		6
-#define MCS_7		7
-#define MCS_8		8	// 2S
-#define MCS_9		9
-#define MCS_10		10
-#define MCS_11		11
-#define MCS_12		12
-#define MCS_13		13
-#define MCS_14		14
-#define MCS_15		15
-#define MCS_16		16	// 3*3
-#define MCS_17		17
-#define MCS_18		18
-#define MCS_19		19
-#define MCS_20		20
-#define MCS_21		21
-#define MCS_22		22
-#define MCS_23		23
-#define MCS_32		32
-#define MCS_AUTO		33
-
-#ifdef DOT11_N_SUPPORT
-// OID_HTPHYMODE
-// MODE
-#define HTMODE_MM	0
-#define HTMODE_GF	1
-#endif // DOT11_N_SUPPORT //
-
-// Fixed Tx MODE - HT, CCK or OFDM
-#define FIXED_TXMODE_HT		0
-#define FIXED_TXMODE_CCK	1
-#define FIXED_TXMODE_OFDM 	2
-// BW
-#define BW_20		BAND_WIDTH_20
-#define BW_40		BAND_WIDTH_40
-#define BW_BOTH		BAND_WIDTH_BOTH
-#define BW_10		BAND_WIDTH_10	// 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field.
-
-#ifdef DOT11_N_SUPPORT
-// SHORTGI
-#define GI_400		GAP_INTERVAL_400	// only support in HT mode
-#define GI_BOTH		GAP_INTERVAL_BOTH
-#endif // DOT11_N_SUPPORT //
-#define GI_800		GAP_INTERVAL_800
-// STBC
-#define STBC_NONE	0
-#ifdef DOT11_N_SUPPORT
-#define STBC_USE	1	// limited use in rt2860b phy
-#define RXSTBC_ONE	1	// rx support of one spatial stream
-#define RXSTBC_TWO	2	// rx support of 1 and 2 spatial stream
-#define RXSTBC_THR	3	// rx support of 1~3 spatial stream
-// MCS FEEDBACK
-#define MCSFBK_NONE	0  // not support mcs feedback /
-#define MCSFBK_RSV	1	// reserved
-#define MCSFBK_UNSOLICIT	2	// only support unsolict mcs feedback
-#define MCSFBK_MRQ	3	// response to both MRQ and unsolict mcs feedback
-
-// MIMO power safe
-#define	MMPS_STATIC	0
-#define	MMPS_DYNAMIC		1
-#define   MMPS_RSV		2
-#define MMPS_ENABLE		3
-
-
-// A-MSDU size
-#define	AMSDU_0	0
-#define	AMSDU_1		1
-
-#endif // DOT11_N_SUPPORT //
-
-// MCS use 7 bits
-#define TXRATEMIMO		0x80
-#define TXRATEMCS		0x7F
-#define TXRATEOFDM		0x7F
-#define RATE_1                      0
-#define RATE_2                      1
-#define RATE_5_5                    2
-#define RATE_11                     3
-#define RATE_6                      4   // OFDM
-#define RATE_9                      5   // OFDM
-#define RATE_12                     6   // OFDM
-#define RATE_18                     7   // OFDM
-#define RATE_24                     8   // OFDM
-#define RATE_36                     9   // OFDM
-#define RATE_48                     10  // OFDM
-#define RATE_54                     11  // OFDM
-#define RATE_FIRST_OFDM_RATE        RATE_6
-#define RATE_LAST_OFDM_RATE        	RATE_54
-#define RATE_6_5                    12  // HT mix
-#define RATE_13                     13  // HT mix
-#define RATE_19_5                   14  // HT mix
-#define RATE_26                     15  // HT mix
-#define RATE_39                     16  // HT mix
-#define RATE_52                     17  // HT mix
-#define RATE_58_5                   18  // HT mix
-#define RATE_65                     19  // HT mix
-#define RATE_78                     20  // HT mix
-#define RATE_104                    21  // HT mix
-#define RATE_117                    22  // HT mix
-#define RATE_130                    23  // HT mix
-//#define RATE_AUTO_SWITCH            255 // for StaCfg.FixedTxRate only
-#define HTRATE_0                      12
-#define RATE_FIRST_MM_RATE        HTRATE_0
-#define RATE_FIRST_HT_RATE        HTRATE_0
-#define RATE_LAST_HT_RATE        HTRATE_0
-
-// pTxWI->txop
-#define IFS_HTTXOP                 0	// The txop will be handles by ASIC.
-#define IFS_PIFS                    1
-#define IFS_SIFS                    2
-#define IFS_BACKOFF                 3
-
-// pTxD->RetryMode
-#define LONG_RETRY                  1
-#define SHORT_RETRY                 0
-
-// Country Region definition
-#define REGION_MINIMUM_BG_BAND            0
-#define REGION_0_BG_BAND                  0       // 1-11
-#define REGION_1_BG_BAND                  1       // 1-13
-#define REGION_2_BG_BAND                  2       // 10-11
-#define REGION_3_BG_BAND                  3       // 10-13
-#define REGION_4_BG_BAND                  4       // 14
-#define REGION_5_BG_BAND                  5       // 1-14
-#define REGION_6_BG_BAND                  6       // 3-9
-#define REGION_7_BG_BAND                  7       // 5-13
-#define REGION_31_BG_BAND                 31       // 5-13
-#define REGION_MAXIMUM_BG_BAND            7
-
-#define REGION_MINIMUM_A_BAND             0
-#define REGION_0_A_BAND                   0       // 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
-#define REGION_1_A_BAND                   1       // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
-#define REGION_2_A_BAND                   2       // 36, 40, 44, 48, 52, 56, 60, 64
-#define REGION_3_A_BAND                   3       // 52, 56, 60, 64, 149, 153, 157, 161
-#define REGION_4_A_BAND                   4       // 149, 153, 157, 161, 165
-#define REGION_5_A_BAND                   5       // 149, 153, 157, 161
-#define REGION_6_A_BAND                   6       // 36, 40, 44, 48
-#define REGION_7_A_BAND                   7       // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
-#define REGION_8_A_BAND                   8       // 52, 56, 60, 64
-#define REGION_9_A_BAND                   9       // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165
-#define REGION_10_A_BAND                  10	  // 36, 40, 44, 48, 149, 153, 157, 161, 165
-#define REGION_11_A_BAND                  11	  // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161
-#define REGION_MAXIMUM_A_BAND             11
-
-// pTxD->CipherAlg
-#define CIPHER_NONE                 0
-#define CIPHER_WEP64                1
-#define CIPHER_WEP128               2
-#define CIPHER_TKIP                 3
-#define CIPHER_AES                  4
-#define CIPHER_CKIP64               5
-#define CIPHER_CKIP128              6
-#define CIPHER_TKIP_NO_MIC          7       // MIC appended by driver: not a valid value in hardware key table
-#define CIPHER_SMS4					8
-
-// value domain of pAd->RfIcType
-#define RFIC_2820                   1       // 2.4G 2T3R
-#define RFIC_2850                   2       // 2.4G/5G 2T3R
-#define RFIC_2720                   3       // 2.4G 1T2R
-#define RFIC_2750                   4       // 2.4G/5G 1T2R
-#define RFIC_3020                   5       // 2.4G 1T1R
-#define RFIC_2020                   6       // 2.4G B/G
-
-// LED Status.
-#define LED_LINK_DOWN               0
-#define LED_LINK_UP                 1
-#define LED_RADIO_OFF               2
-#define LED_RADIO_ON                3
-#define LED_HALT                    4
-#define LED_WPS                     5
-#define LED_ON_SITE_SURVEY          6
-#define LED_POWER_UP                7
-
-// value domain of pAd->LedCntl.LedMode and E2PROM
-#define LED_MODE_DEFAULT            0
-#define LED_MODE_TWO_LED			1
-#define LED_MODE_SIGNAL_STREGTH		8  // EEPROM define =8
-
-// RC4 init value, used fro WEP & TKIP
-#define PPPINITFCS32                0xffffffff   /* Initial FCS value */
-
-// value domain of pAd->StaCfg.PortSecured. 802.1X controlled port definition
-#define WPA_802_1X_PORT_SECURED     1
-#define WPA_802_1X_PORT_NOT_SECURED 2
-
-#define PAIRWISE_KEY                1
-#define GROUP_KEY                   2
-
-//definition of DRS
-#define MAX_STEP_OF_TX_RATE_SWITCH	32
-
-
-// pre-allocated free NDIS PACKET/BUFFER poll for internal usage
-#define MAX_NUM_OF_FREE_NDIS_PACKET 128
-
-//Block ACK
-#define MAX_TX_REORDERBUF   64
-#define MAX_RX_REORDERBUF   64
-#define DEFAULT_TX_TIMEOUT   30
-#define DEFAULT_RX_TIMEOUT   30
-
-// definition of Recipient or Originator
-#define I_RECIPIENT                  TRUE
-#define I_ORIGINATOR                   FALSE
-
-#define DEFAULT_BBP_TX_POWER        0
-#define DEFAULT_RF_TX_POWER         5
-
-#define MAX_INI_BUFFER_SIZE			4096
-#define MAX_PARAM_BUFFER_SIZE		(2048) // enough for ACL (18*64)
-											//18 : the length of Mac address acceptable format "01:02:03:04:05:06;")
-											//64 : MAX_NUM_OF_ACL_LIST
-// definition of pAd->OpMode
-#define OPMODE_STA                  0
-#define OPMODE_AP                   1
-//#define OPMODE_L3_BRG               2       // as AP and STA at the same time
-
-#ifdef RT_BIG_ENDIAN
-#define DIR_READ                    0
-#define DIR_WRITE                   1
-#define TYPE_TXD                    0
-#define TYPE_RXD                    1
-#define TYPE_TXINFO					0
-#define TYPE_RXINFO					1
-#define TYPE_TXWI					0
-#define TYPE_RXWI					1
-#endif
-
-// ========================= AP rtmp_def.h ===========================
-// value domain for pAd->EventTab.Log[].Event
-#define EVENT_RESET_ACCESS_POINT    0 // Log = "hh:mm:ss   Restart Access Point"
-#define EVENT_ASSOCIATED            1 // Log = "hh:mm:ss   STA 00:01:02:03:04:05 associated"
-#define EVENT_DISASSOCIATED         2 // Log = "hh:mm:ss   STA 00:01:02:03:04:05 left this BSS"
-#define EVENT_AGED_OUT              3 // Log = "hh:mm:ss   STA 00:01:02:03:04:05 was aged-out and removed from this BSS"
-#define EVENT_COUNTER_M             4
-#define EVENT_INVALID_PSK           5
-#define EVENT_MAX_EVENT_TYPE        6
-// ==== end of AP rtmp_def.h ============
-
-// definition RSSI Number
-#define RSSI_0					0
-#define RSSI_1					1
-#define RSSI_2					2
-
-// definition of radar detection
-#define RD_NORMAL_MODE				0	// Not found radar signal
-#define RD_SWITCHING_MODE			1	// Found radar signal, and doing channel switch
-#define RD_SILENCE_MODE				2	// After channel switch, need to be silence a while to ensure radar not found
-
-//Driver defined cid for mapping status and command.
-#define  SLEEPCID	0x11
-#define  WAKECID	0x22
-#define  QUERYPOWERCID	0x33
-#define  OWNERMCU	0x1
-#define  OWNERCPU	0x0
-
-// MBSSID definition
-#define ENTRY_NOT_FOUND             0xFF
-
-
-/* After Linux 2.6.9,
- * VLAN module use Private (from user) interface flags (netdevice->priv_flags).
- * #define IFF_802_1Q_VLAN 0x1         --    802.1Q VLAN device.  in if.h
- * ref to ip_sabotage_out() [ out->priv_flags & IFF_802_1Q_VLAN ] in br_netfilter.c
- *
- * For this reason, we MUST use EVEN value in priv_flags
- */
-#define INT_MAIN                    0x0100
-#define INT_MBSSID                  0x0200
-#define INT_WDS                     0x0300
-#define INT_APCLI                   0x0400
-#define INT_MESH                   	0x0500
-
-// Use bitmap to allow coexist of ATE_TXFRAME and ATE_RXFRAME(i.e.,to support LoopBack mode)
-#ifdef RALINK_ATE
-#define	ATE_START                   0x00   // Start ATE
-#define	ATE_STOP                    0x80   // Stop ATE
-#define	ATE_TXCONT                  0x05   // Continuous Transmit
-#define	ATE_TXCARR                  0x09   // Transmit Carrier
-#define	ATE_TXCARRSUPP              0x11   // Transmit Carrier Suppression
-#define	ATE_TXFRAME                 0x01   // Transmit Frames
-#define	ATE_RXFRAME                 0x02   // Receive Frames
-#ifdef RALINK_28xx_QA
-#define ATE_TXSTOP                  0xe2   // Stop Transmition(i.e., TXCONT, TXCARR, TXCARRSUPP, and TXFRAME)
-#define ATE_RXSTOP					0xfd   // Stop receiving Frames
-#define	BBP22_TXFRAME     			0x00   // Transmit Frames
-#define	BBP22_TXCONT_OR_CARRSUPP    0x80   // Continuous Transmit or Carrier Suppression
-#define	BBP22_TXCARR                0xc1   // Transmit Carrier
-#define	BBP24_TXCONT                0x00   // Continuous Transmit
-#define	BBP24_CARRSUPP              0x01   // Carrier Suppression
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
-// WEP Key TYPE
-#define WEP_HEXADECIMAL_TYPE    0
-#define WEP_ASCII_TYPE          1
-
-
-
-// WIRELESS EVENTS definition
-/* Max number of char in custom event, refer to wireless_tools.28/wireless.20.h */
-#define IW_CUSTOM_MAX_LEN				  			255	/* In bytes */
-
-// For system event - start
-#define	IW_SYS_EVENT_FLAG_START                     0x0200
-#define	IW_ASSOC_EVENT_FLAG                         0x0200
-#define	IW_DISASSOC_EVENT_FLAG                      0x0201
-#define	IW_DEAUTH_EVENT_FLAG                      	0x0202
-#define	IW_AGEOUT_EVENT_FLAG                      	0x0203
-#define	IW_COUNTER_MEASURES_EVENT_FLAG              0x0204
-#define	IW_REPLAY_COUNTER_DIFF_EVENT_FLAG           0x0205
-#define	IW_RSNIE_DIFF_EVENT_FLAG           			0x0206
-#define	IW_MIC_DIFF_EVENT_FLAG           			0x0207
-#define IW_ICV_ERROR_EVENT_FLAG						0x0208
-#define IW_MIC_ERROR_EVENT_FLAG						0x0209
-#define IW_GROUP_HS_TIMEOUT_EVENT_FLAG				0x020A
-#define	IW_PAIRWISE_HS_TIMEOUT_EVENT_FLAG			0x020B
-#define IW_RSNIE_SANITY_FAIL_EVENT_FLAG				0x020C
-#define IW_SET_KEY_DONE_WPA1_EVENT_FLAG				0x020D
-#define IW_SET_KEY_DONE_WPA2_EVENT_FLAG				0x020E
-#define IW_STA_LINKUP_EVENT_FLAG					0x020F
-#define IW_STA_LINKDOWN_EVENT_FLAG					0x0210
-#define IW_SCAN_COMPLETED_EVENT_FLAG				0x0211
-#define IW_SCAN_ENQUEUE_FAIL_EVENT_FLAG				0x0212
-// if add new system event flag, please upadte the IW_SYS_EVENT_FLAG_END
-#define	IW_SYS_EVENT_FLAG_END                       0x0212
-#define	IW_SYS_EVENT_TYPE_NUM						(IW_SYS_EVENT_FLAG_END - IW_SYS_EVENT_FLAG_START + 1)
-// For system event - end
-
-// For spoof attack event - start
-#define	IW_SPOOF_EVENT_FLAG_START                   0x0300
-#define IW_CONFLICT_SSID_EVENT_FLAG					0x0300
-#define IW_SPOOF_ASSOC_RESP_EVENT_FLAG				0x0301
-#define IW_SPOOF_REASSOC_RESP_EVENT_FLAG			0x0302
-#define IW_SPOOF_PROBE_RESP_EVENT_FLAG				0x0303
-#define IW_SPOOF_BEACON_EVENT_FLAG					0x0304
-#define IW_SPOOF_DISASSOC_EVENT_FLAG				0x0305
-#define IW_SPOOF_AUTH_EVENT_FLAG					0x0306
-#define IW_SPOOF_DEAUTH_EVENT_FLAG					0x0307
-#define IW_SPOOF_UNKNOWN_MGMT_EVENT_FLAG			0x0308
-#define IW_REPLAY_ATTACK_EVENT_FLAG					0x0309
-// if add new spoof attack event flag, please upadte the IW_SPOOF_EVENT_FLAG_END
-#define	IW_SPOOF_EVENT_FLAG_END                     0x0309
-#define	IW_SPOOF_EVENT_TYPE_NUM						(IW_SPOOF_EVENT_FLAG_END - IW_SPOOF_EVENT_FLAG_START + 1)
-// For spoof attack event - end
-
-// For flooding attack event - start
-#define	IW_FLOOD_EVENT_FLAG_START                   0x0400
-#define IW_FLOOD_AUTH_EVENT_FLAG					0x0400
-#define IW_FLOOD_ASSOC_REQ_EVENT_FLAG				0x0401
-#define IW_FLOOD_REASSOC_REQ_EVENT_FLAG				0x0402
-#define IW_FLOOD_PROBE_REQ_EVENT_FLAG				0x0403
-#define IW_FLOOD_DISASSOC_EVENT_FLAG				0x0404
-#define IW_FLOOD_DEAUTH_EVENT_FLAG					0x0405
-#define IW_FLOOD_EAP_REQ_EVENT_FLAG					0x0406
-// if add new flooding attack event flag, please upadte the IW_FLOOD_EVENT_FLAG_END
-#define	IW_FLOOD_EVENT_FLAG_END                   	0x0406
-#define	IW_FLOOD_EVENT_TYPE_NUM						(IW_FLOOD_EVENT_FLAG_END - IW_FLOOD_EVENT_FLAG_START + 1)
-// For flooding attack - end
-
-// End - WIRELESS EVENTS definition
-
-#ifdef CONFIG_STA_SUPPORT
-// definition for DLS, kathy
-#define	MAX_NUM_OF_INIT_DLS_ENTRY   1
-#define	MAX_NUM_OF_DLS_ENTRY        MAX_NUMBER_OF_DLS_ENTRY
-
-//Block ACK , rt2860, kathy
-#define MAX_TX_REORDERBUF		64
-#define MAX_RX_REORDERBUF		64
-#define DEFAULT_TX_TIMEOUT		30
-#define DEFAULT_RX_TIMEOUT		30
-#ifndef CONFIG_AP_SUPPORT
-#define MAX_BARECI_SESSION		8
-#endif
-
-#ifndef IW_ESSID_MAX_SIZE
-/* Maximum size of the ESSID and pAd->nickname strings */
-#define IW_ESSID_MAX_SIZE   		32
-#endif
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef MCAST_RATE_SPECIFIC
-#define MCAST_DISABLE	0
-#define MCAST_CCK		1
-#define MCAST_OFDM		2
-#define MCAST_HTMIX		3
-#endif // MCAST_RATE_SPECIFIC //
-
-// For AsicRadioOff/AsicRadioOn function
-#define DOT11POWERSAVE		0
-#define GUIRADIO_OFF		1
-#define RTMP_HALT		    2
-#define GUI_IDLE_POWER_SAVE		3
-// --
-
-
-// definition for WpaSupport flag
-#define WPA_SUPPLICANT_DISABLE				0
-#define WPA_SUPPLICANT_ENABLE				1
-#define	WPA_SUPPLICANT_ENABLE_WITH_WEB_UI	2
-
-// Endian byte swapping codes
-#define SWAP16(x) \
-    ((UINT16)( \
-    (((UINT16)(x) & (UINT16) 0x00ffU) << 8) | \
-    (((UINT16)(x) & (UINT16) 0xff00U) >> 8) ))
-
-#define SWAP32(x) \
-    ((UINT32)( \
-    (((UINT32)(x) & (UINT32) 0x000000ffUL) << 24) | \
-    (((UINT32)(x) & (UINT32) 0x0000ff00UL) <<  8) | \
-    (((UINT32)(x) & (UINT32) 0x00ff0000UL) >>  8) | \
-    (((UINT32)(x) & (UINT32) 0xff000000UL) >> 24) ))
-
-#define SWAP64(x) \
-    ((UINT64)( \
-    (UINT64)(((UINT64)(x) & (UINT64) 0x00000000000000ffULL) << 56) | \
-    (UINT64)(((UINT64)(x) & (UINT64) 0x000000000000ff00ULL) << 40) | \
-    (UINT64)(((UINT64)(x) & (UINT64) 0x0000000000ff0000ULL) << 24) | \
-    (UINT64)(((UINT64)(x) & (UINT64) 0x00000000ff000000ULL) <<  8) | \
-    (UINT64)(((UINT64)(x) & (UINT64) 0x000000ff00000000ULL) >>  8) | \
-    (UINT64)(((UINT64)(x) & (UINT64) 0x0000ff0000000000ULL) >> 24) | \
-    (UINT64)(((UINT64)(x) & (UINT64) 0x00ff000000000000ULL) >> 40) | \
-    (UINT64)(((UINT64)(x) & (UINT64) 0xff00000000000000ULL) >> 56) ))
-
-#ifdef RT_BIG_ENDIAN
-
-#define cpu2le64(x) SWAP64((x))
-#define le2cpu64(x) SWAP64((x))
-#define cpu2le32(x) SWAP32((x))
-#define le2cpu32(x) SWAP32((x))
-#define cpu2le16(x) SWAP16((x))
-#define le2cpu16(x) SWAP16((x))
-#define cpu2be64(x) ((UINT64)(x))
-#define be2cpu64(x) ((UINT64)(x))
-#define cpu2be32(x) ((UINT32)(x))
-#define be2cpu32(x) ((UINT32)(x))
-#define cpu2be16(x) ((UINT16)(x))
-#define be2cpu16(x) ((UINT16)(x))
-
-#else   // Little_Endian
-
-#define cpu2le64(x) ((UINT64)(x))
-#define le2cpu64(x) ((UINT64)(x))
-#define cpu2le32(x) ((UINT32)(x))
-#define le2cpu32(x) ((UINT32)(x))
-#define cpu2le16(x) ((UINT16)(x))
-#define le2cpu16(x) ((UINT16)(x))
-#define cpu2be64(x) SWAP64((x))
-#define be2cpu64(x) SWAP64((x))
-#define cpu2be32(x) SWAP32((x))
-#define be2cpu32(x) SWAP32((x))
-#define cpu2be16(x) SWAP16((x))
-#define be2cpu16(x) SWAP16((x))
-
-#endif  // RT_BIG_ENDIAN
-
-#endif  // __RTMP_DEF_H__
-
-
+#include "../rt2860/rtmp_def.h"
diff --git a/drivers/staging/rt2870/rtmp_type.h b/drivers/staging/rt2870/rtmp_type.h
index 1fd7df1e179..fbf97d0fa5d 100644
--- a/drivers/staging/rt2870/rtmp_type.h
+++ b/drivers/staging/rt2870/rtmp_type.h
@@ -1,94 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-    rtmp_type.h
-
-    Abstract:
-
-    Revision History:
-    Who         When            What
-    --------    ----------      ----------------------------------------------
-    Name        Date            Modification logs
-    Paul Lin    1-2-2004
-*/
-#ifndef __RTMP_TYPE_H__
-#define __RTMP_TYPE_H__
-
-#define PACKED  __attribute__ ((packed))
-
-// Put platform dependent declaration here
-// For example, linux type definition
-typedef unsigned char		UINT8;
-typedef unsigned short		UINT16;
-typedef unsigned int		UINT32;
-typedef unsigned long long	UINT64;
-typedef int					INT32;
-typedef long long 			INT64;
-
-typedef unsigned char *			PUINT8;
-typedef unsigned short *		PUINT16;
-typedef unsigned int *			PUINT32;
-typedef unsigned long long *	PUINT64;
-typedef int	*					PINT32;
-typedef long long * 			PINT64;
-
-typedef signed char			CHAR;
-typedef signed short		SHORT;
-typedef signed int			INT;
-typedef signed long			LONG;
-typedef signed long long	LONGLONG;
-
-
-typedef unsigned char		UCHAR;
-typedef unsigned short		USHORT;
-typedef unsigned int		UINT;
-typedef unsigned long		ULONG;
-typedef unsigned long long	ULONGLONG;
-
-typedef unsigned char		BOOLEAN;
-typedef void				VOID;
-
-typedef VOID *				PVOID;
-typedef CHAR *				PCHAR;
-typedef UCHAR * 			PUCHAR;
-typedef USHORT *			PUSHORT;
-typedef LONG *				PLONG;
-typedef ULONG *				PULONG;
-typedef UINT *				PUINT;
-
-typedef unsigned int	NDIS_MEDIA_STATE;
-
-typedef union _LARGE_INTEGER {
-    struct {
-        UINT LowPart;
-        INT32 HighPart;
-    } u;
-    INT64 QuadPart;
-} LARGE_INTEGER;
-
-#endif  // __RTMP_TYPE_H__
-
+#include "../rt2860/rtmp_type.h"
diff --git a/drivers/staging/rt2870/spectrum.h b/drivers/staging/rt2870/spectrum.h
index 94cfa5b174f..8aa23a1833b 100644
--- a/drivers/staging/rt2870/spectrum.h
+++ b/drivers/staging/rt2870/spectrum.h
@@ -1,322 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-#ifndef __SPECTRUM_H__
-#define __SPECTRUM_H__
-
-#include "rtmp_type.h"
-#include "spectrum_def.h"
-
-typedef struct PACKED _TPC_REPORT_INFO
-{
-	UINT8 TxPwr;
-	UINT8 LinkMargin;
-} TPC_REPORT_INFO, *PTPC_REPORT_INFO;
-
-typedef struct PACKED _CH_SW_ANN_INFO
-{
-	UINT8 ChSwMode;
-	UINT8 Channel;
-	UINT8 ChSwCnt;
-} CH_SW_ANN_INFO, *PCH_SW_ANN_INFO;
-
-typedef union PACKED _MEASURE_REQ_MODE
-{
-#ifdef RT_BIG_ENDIAN
-	struct PACKED
-	{
-		UINT8 Rev1:4;
-		UINT8 Report:1;
-		UINT8 Request:1;
-		UINT8 Enable:1;
-		UINT8 Rev0:1;
-	} field;
-#else
-	struct PACKED
-	{
-		UINT8 Rev0:1;
-		UINT8 Enable:1;
-		UINT8 Request:1;
-		UINT8 Report:1;
-		UINT8 Rev1:4;
-	} field;
-#endif // RT_BIG_ENDIAN //
-	UINT8 word;
-} MEASURE_REQ_MODE, *PMEASURE_REQ_MODE;
-
-typedef struct PACKED _MEASURE_REQ
-{
-	UINT8 ChNum;
-	UINT64 MeasureStartTime;
-	UINT16 MeasureDuration;
-} MEASURE_REQ, *PMEASURE_REQ;
-
-typedef struct PACKED _MEASURE_REQ_INFO
-{
-	UINT8 Token;
-	MEASURE_REQ_MODE ReqMode;
-	UINT8 ReqType;
-	MEASURE_REQ MeasureReq;
-} MEASURE_REQ_INFO, *PMEASURE_REQ_INFO;
-
-typedef union PACKED _MEASURE_BASIC_REPORT_MAP
-{
-#ifdef RT_BIG_ENDIAN
-	struct PACKED
-	{
-		UINT8 Rev:3;
-		UINT8 Unmeasure:1;
-		UINT8 Radar:1;
-		UINT8 UnidentifiedSignal:1;
-		UINT8 OfdmPreamble:1;
-		UINT8 BSS:1;
-	} field;
-#else
-	struct PACKED
-	{
-		UINT8 BSS:1;
-		UINT8 OfdmPreamble:1;
-		UINT8 UnidentifiedSignal:1;
-		UINT8 Radar:1;
-		UINT8 Unmeasure:1;
-		UINT8 Rev:3;
-	} field;
-#endif // RT_BIG_ENDIAN //
-	UINT8 word;
-} MEASURE_BASIC_REPORT_MAP, *PMEASURE_BASIC_REPORT_MAP;
-
-typedef struct PACKED _MEASURE_BASIC_REPORT
-{
-	UINT8 ChNum;
-	UINT64 MeasureStartTime;
-	UINT16 MeasureDuration;
-	MEASURE_BASIC_REPORT_MAP Map;
-} MEASURE_BASIC_REPORT, *PMEASURE_BASIC_REPORT;
-
-typedef struct PACKED _MEASURE_CCA_REPORT
-{
-	UINT8 ChNum;
-	UINT64 MeasureStartTime;
-	UINT16 MeasureDuration;
-	UINT8 CCA_Busy_Fraction;
-} MEASURE_CCA_REPORT, *PMEASURE_CCA_REPORT;
-
-typedef struct PACKED _MEASURE_RPI_REPORT
-{
-	UINT8 ChNum;
-	UINT64 MeasureStartTime;
-	UINT16 MeasureDuration;
-	UINT8 RPI_Density[8];
-} MEASURE_RPI_REPORT, *PMEASURE_RPI_REPORT;
-
-typedef union PACKED _MEASURE_REPORT_MODE
-{
-	struct PACKED
-	{
-#ifdef RT_BIG_ENDIAN
-		UINT8 Rev:5;
-		UINT8 Refused:1;
-		UINT8 Incapable:1;
-		UINT8 Late:1;
-#else
-		UINT8 Late:1;
-		UINT8 Incapable:1;
-		UINT8 Refused:1;
-		UINT8 Rev:5;
-#endif // RT_BIG_ENDIAN //
-	} field;
-	UINT8 word;
-} MEASURE_REPORT_MODE, *PMEASURE_REPORT_MODE;
-
-typedef struct PACKED _MEASURE_REPORT_INFO
-{
-	UINT8 Token;
-	MEASURE_REPORT_MODE ReportMode;
-	UINT8 ReportType;
-	UINT8 Octect[0];
-} MEASURE_REPORT_INFO, *PMEASURE_REPORT_INFO;
-
-typedef struct PACKED _QUIET_INFO
-{
-	UINT8 QuietCnt;
-	UINT8 QuietPeriod;
-	UINT8 QuietDuration;
-	UINT8 QuietOffset;
-} QUIET_INFO, *PQUIET_INFO;
-
-/*
-	==========================================================================
-	Description:
-		Prepare Measurement request action frame and enqueue it into
-		management queue waiting for transmition.
-
-	Parametrs:
-		1. the destination mac address of the frame.
-
-	Return	: None.
-	==========================================================================
- */
-VOID EnqueueMeasurementReq(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pDA,
-	IN UINT8 MeasureToken,
-	IN UINT8 MeasureReqMode,
-	IN UINT8 MeasureReqType,
-	IN UINT8 MeasureCh,
-	IN UINT16 MeasureDuration);
-
-/*
-	==========================================================================
-	Description:
-		Prepare Measurement report action frame and enqueue it into
-		management queue waiting for transmition.
-
-	Parametrs:
-		1. the destination mac address of the frame.
-
-	Return	: None.
-	==========================================================================
- */
-VOID EnqueueMeasurementRep(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pDA,
-	IN UINT8 DialogToken,
-	IN UINT8 MeasureToken,
-	IN UINT8 MeasureReqMode,
-	IN UINT8 MeasureReqType,
-	IN UINT8 ReportInfoLen,
-	IN PUINT8 pReportInfo);
-
-/*
-	==========================================================================
-	Description:
-		Prepare TPC Request action frame and enqueue it into
-		management queue waiting for transmition.
-
-	Parametrs:
-		1. the destination mac address of the frame.
-
-	Return	: None.
-	==========================================================================
- */
-VOID EnqueueTPCReq(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pDA,
-	IN UCHAR DialogToken);
-
-/*
-	==========================================================================
-	Description:
-		Prepare TPC Report action frame and enqueue it into
-		management queue waiting for transmition.
-
-	Parametrs:
-		1. the destination mac address of the frame.
-
-	Return	: None.
-	==========================================================================
- */
-VOID EnqueueTPCRep(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pDA,
-	IN UINT8 DialogToken,
-	IN UINT8 TxPwr,
-	IN UINT8 LinkMargin);
-
-/*
-	==========================================================================
-	Description:
-		Prepare Channel Switch Announcement action frame and enqueue it into
-		management queue waiting for transmition.
-
-	Parametrs:
-		1. the destination mac address of the frame.
-		2. Channel switch announcement mode.
-		2. a New selected channel.
-
-	Return	: None.
-	==========================================================================
- */
-VOID EnqueueChSwAnn(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pDA,
-	IN UINT8 ChSwMode,
-	IN UINT8 NewCh);
-
-/*
-	==========================================================================
-	Description:
-		Spectrun action frames Handler such as channel switch annoucement,
-		measurement report, measurement request actions frames.
-
-	Parametrs:
-		Elme - MLME message containing the received frame
-
-	Return	: None.
-	==========================================================================
- */
-VOID PeerSpectrumAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-
-/*
-	==========================================================================
-	Description:
-
-	Parametrs:
-
-	Return	: None.
-	==========================================================================
- */
-INT Set_MeasureReq_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_TpcReq_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-VOID MeasureReqTabInit(
-	IN PRTMP_ADAPTER pAd);
-
-VOID MeasureReqTabExit(
-	IN PRTMP_ADAPTER pAd);
-
-VOID TpcReqTabInit(
-	IN PRTMP_ADAPTER pAd);
-
-VOID TpcReqTabExit(
-	IN PRTMP_ADAPTER pAd);
-
-VOID NotifyChSwAnnToPeerAPs(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pRA,
-	IN PUCHAR pTA,
-	IN UINT8 ChSwMode,
-	IN UINT8 Channel);
-#endif // __SPECTRUM_H__ //
-
+#include "../rt2860/spectrum.h"
diff --git a/drivers/staging/rt2870/spectrum_def.h b/drivers/staging/rt2870/spectrum_def.h
index 4ca4817bba0..a65f551e391 100644
--- a/drivers/staging/rt2870/spectrum_def.h
+++ b/drivers/staging/rt2870/spectrum_def.h
@@ -1,95 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-	spectrum_def.h
-
-    Abstract:
-    Handle association related requests either from WSTA or from local MLME
-
-    Revision History:
-    Who          When          What
-    ---------    ----------    ----------------------------------------------
-	Fonchi Wu    2008	  	   created for 802.11h
- */
-
-#ifndef __SPECTRUM_DEF_H__
-#define __SPECTRUM_DEF_H__
-
-#define MAX_MEASURE_REQ_TAB_SIZE		3
-#define MAX_HASH_MEASURE_REQ_TAB_SIZE	MAX_MEASURE_REQ_TAB_SIZE
-
-#define MAX_TPC_REQ_TAB_SIZE			3
-#define MAX_HASH_TPC_REQ_TAB_SIZE		MAX_TPC_REQ_TAB_SIZE
-
-#define MIN_RCV_PWR				100		/* Negative value ((dBm) */
-
-#define RM_TPC_REQ				0
-#define RM_MEASURE_REQ			1
-
-#define RM_BASIC				0
-#define RM_CCA					1
-#define RM_RPI_HISTOGRAM		2
-
-#define TPC_REQ_AGE_OUT			500		/* ms */
-#define MQ_REQ_AGE_OUT			500		/* ms */
-
-#define TPC_DIALOGTOKEN_HASH_INDEX(_DialogToken)	((_DialogToken) % MAX_HASH_TPC_REQ_TAB_SIZE)
-#define MQ_DIALOGTOKEN_HASH_INDEX(_DialogToken)		((_DialogToken) % MAX_MEASURE_REQ_TAB_SIZE)
-
-typedef struct _MEASURE_REQ_ENTRY
-{
-	struct _MEASURE_REQ_ENTRY *pNext;
-	ULONG lastTime;
-	BOOLEAN	Valid;
-	UINT8 DialogToken;
-	UINT8 MeasureDialogToken[3];	// 0:basic measure, 1: CCA measure, 2: RPI_Histogram measure.
-} MEASURE_REQ_ENTRY, *PMEASURE_REQ_ENTRY;
-
-typedef struct _MEASURE_REQ_TAB
-{
-	UCHAR Size;
-	PMEASURE_REQ_ENTRY Hash[MAX_HASH_MEASURE_REQ_TAB_SIZE];
-	MEASURE_REQ_ENTRY Content[MAX_MEASURE_REQ_TAB_SIZE];
-} MEASURE_REQ_TAB, *PMEASURE_REQ_TAB;
-
-typedef struct _TPC_REQ_ENTRY
-{
-	struct _TPC_REQ_ENTRY *pNext;
-	ULONG lastTime;
-	BOOLEAN Valid;
-	UINT8 DialogToken;
-} TPC_REQ_ENTRY, *PTPC_REQ_ENTRY;
-
-typedef struct _TPC_REQ_TAB
-{
-	UCHAR Size;
-	PTPC_REQ_ENTRY Hash[MAX_HASH_TPC_REQ_TAB_SIZE];
-	TPC_REQ_ENTRY Content[MAX_TPC_REQ_TAB_SIZE];
-} TPC_REQ_TAB, *PTPC_REQ_TAB;
-
-#endif // __SPECTRUM_DEF_H__ //
-
+#include "../rt2860/spectrum_def.h"
diff --git a/drivers/staging/rt2870/sta/aironet.c b/drivers/staging/rt2870/sta/aironet.c
index 4af4a190618..72b7f2e6bf7 100644
--- a/drivers/staging/rt2870/sta/aironet.c
+++ b/drivers/staging/rt2870/sta/aironet.c
@@ -1,1312 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	aironet.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Paul Lin	04-06-15		Initial
-*/
-#include "../rt_config.h"
-
-/*
-	==========================================================================
-	Description:
-		association	state machine init,	including state	transition and timer init
-	Parameters:
-		S -	pointer	to the association state machine
-	==========================================================================
- */
-VOID	AironetStateMachineInit(
-	IN	PRTMP_ADAPTER		pAd,
-	IN	STATE_MACHINE		*S,
-	OUT	STATE_MACHINE_FUNC	Trans[])
-{
-	StateMachineInit(S,	Trans, MAX_AIRONET_STATE, MAX_AIRONET_MSG, (STATE_MACHINE_FUNC)Drop, AIRONET_IDLE, AIRONET_MACHINE_BASE);
-	StateMachineSetAction(S, AIRONET_IDLE, MT2_AIRONET_MSG, (STATE_MACHINE_FUNC)AironetMsgAction);
-	StateMachineSetAction(S, AIRONET_IDLE, MT2_AIRONET_SCAN_REQ, (STATE_MACHINE_FUNC)AironetRequestAction);
-	StateMachineSetAction(S, AIRONET_SCANNING, MT2_AIRONET_SCAN_DONE, (STATE_MACHINE_FUNC)AironetReportAction);
-}
-
-/*
-	==========================================================================
-	Description:
-		This is	state machine function.
-		When receiving EAPOL packets which is  for 802.1x key management.
-		Use	both in	WPA, and WPAPSK	case.
-		In this	function, further dispatch to different	functions according	to the received	packet.	 3 categories are :
-		  1.  normal 4-way pairwisekey and 2-way groupkey handshake
-		  2.  MIC error	(Countermeasures attack)  report packet	from STA.
-		  3.  Request for pairwise/group key update	from STA
-	Return:
-	==========================================================================
-*/
-VOID	AironetMsgAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MLME_QUEUE_ELEM	*Elem)
-{
-	USHORT							Length;
-	UCHAR							Index, i;
-	PUCHAR							pData;
-	PAIRONET_RM_REQUEST_FRAME		pRMReq;
-	PRM_REQUEST_ACTION				pReqElem;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("-----> AironetMsgAction\n"));
-
-	// 0. Get Aironet IAPP header first
-	pRMReq = (PAIRONET_RM_REQUEST_FRAME) &Elem->Msg[LENGTH_802_11];
-	pData  = (PUCHAR) &Elem->Msg[LENGTH_802_11];
-
-	// 1. Change endian format form network to little endian
-	Length = be2cpu16(pRMReq->IAPP.Length);
-
-	// 2.0 Sanity check, this should only happen when CCX 2.0 support is enabled
-	if (pAd->StaCfg.CCXEnable != TRUE)
-		return;
-
-	// 2.1 Radio measurement must be on
-	if (pAd->StaCfg.CCXControl.field.RMEnable != 1)
-		return;
-
-	// 2.2. Debug print all bit information
-	DBGPRINT(RT_DEBUG_TRACE, ("IAPP ID & Length %d\n", Length));
-	DBGPRINT(RT_DEBUG_TRACE, ("IAPP Type %x\n", pRMReq->IAPP.Type));
-	DBGPRINT(RT_DEBUG_TRACE, ("IAPP SubType %x\n", pRMReq->IAPP.SubType));
-	DBGPRINT(RT_DEBUG_TRACE, ("IAPP Dialog Token %x\n", pRMReq->IAPP.Token));
-	DBGPRINT(RT_DEBUG_TRACE, ("IAPP Activation Delay %x\n", pRMReq->Delay));
-	DBGPRINT(RT_DEBUG_TRACE, ("IAPP Measurement Offset %x\n", pRMReq->Offset));
-
-	// 3. Check IAPP frame type, it must be 0x32 for Cisco Aironet extension
-	if (pRMReq->IAPP.Type != AIRONET_IAPP_TYPE)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("Wrong IAPP type for Cisco Aironet extension\n"));
-		return;
-	}
-
-	// 4. Check IAPP frame subtype, it must be 0x01 for Cisco Aironet extension request.
-	//    Since we are acting as client only, we will disregards reply subtype.
-	if (pRMReq->IAPP.SubType != AIRONET_IAPP_SUBTYPE_REQUEST)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("Wrong IAPP subtype for Cisco Aironet extension\n"));
-		return;
-	}
-
-	// 5. Verify Destination MAC and Source MAC, both should be all zeros.
-	if (! MAC_ADDR_EQUAL(pRMReq->IAPP.DA, ZERO_MAC_ADDR))
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("Wrong IAPP DA for Cisco Aironet extension, it's not Zero\n"));
-		return;
-	}
-
-	if (! MAC_ADDR_EQUAL(pRMReq->IAPP.SA, ZERO_MAC_ADDR))
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("Wrong IAPP SA for Cisco Aironet extension, it's not Zero\n"));
-		return;
-	}
-
-	// 6. Reinit all report related fields
-	NdisZeroMemory(pAd->StaCfg.FrameReportBuf, 2048);
-	NdisZeroMemory(pAd->StaCfg.BssReportOffset, sizeof(USHORT) * MAX_LEN_OF_BSS_TABLE);
-	NdisZeroMemory(pAd->StaCfg.MeasurementRequest, sizeof(RM_REQUEST_ACTION) * 4);
-
-	// 7. Point to the start of first element report element
-	pAd->StaCfg.FrameReportLen   = LENGTH_802_11 + sizeof(AIRONET_IAPP_HEADER);
-	DBGPRINT(RT_DEBUG_TRACE, ("FR len = %d\n", pAd->StaCfg.FrameReportLen));
-	pAd->StaCfg.LastBssIndex     = 0xff;
-	pAd->StaCfg.RMReqCnt         = 0;
-	pAd->StaCfg.ParallelReq      = FALSE;
-	pAd->StaCfg.ParallelDuration = 0;
-	pAd->StaCfg.ParallelChannel  = 0;
-	pAd->StaCfg.IAPPToken        = pRMReq->IAPP.Token;
-	pAd->StaCfg.CurrentRMReqIdx  = 0;
-	pAd->StaCfg.CLBusyBytes      = 0;
-	// Reset the statistics
-	for (i = 0; i < 8; i++)
-		pAd->StaCfg.RPIDensity[i] = 0;
-
-	Index = 0;
-
-	// 8. Save dialog token for report
-	pAd->StaCfg.IAPPToken = pRMReq->IAPP.Token;
-
-	// Save Activation delay & measurement offset, Not really needed
-
-	// 9. Point to the first request element
-	pData += sizeof(AIRONET_RM_REQUEST_FRAME);
-	//    Length should exclude the CISCO Aironet SNAP header
-	Length -= (sizeof(AIRONET_RM_REQUEST_FRAME) - LENGTH_802_1_H);
-
-	// 10. Start Parsing the Measurement elements.
-	//    Be careful about multiple MR elements within one frames.
-	while (Length > 0)
-	{
-		pReqElem = (PRM_REQUEST_ACTION) pData;
-		switch (pReqElem->ReqElem.Eid)
-		{
-			case IE_MEASUREMENT_REQUEST:
-				// From the example, it seems we only need to support one request in one frame
-				// There is no multiple request in one frame.
-				// Besides, looks like we need to take care the measurement request only.
-				// The measurement request is always 4 bytes.
-
-				// Start parsing this type of request.
-				// 0. Eid is IE_MEASUREMENT_REQUEST
-				// 1. Length didn't include Eid and Length field, it always be 8.
-				// 2. Measurement Token, we nned to save it for the corresponding report.
-				// 3. Measurement Mode, Although there are definitions, but we din't see value other than
-				//    0 from test specs examples.
-				// 4. Measurement Type, this is what we need to do.
-				switch (pReqElem->ReqElem.Type)
-				{
-					case MSRN_TYPE_CHANNEL_LOAD_REQ:
-					case MSRN_TYPE_NOISE_HIST_REQ:
-					case MSRN_TYPE_BEACON_REQ:
-						// Check the Enable non-serving channel measurement control
-						if (pAd->StaCfg.CCXControl.field.DCRMEnable == 0)
-						{
-							// Check channel before enqueue the action
-							if (pReqElem->Measurement.Channel != pAd->CommonCfg.Channel)
-								break;
-						}
-						else
-						{
-							// If off channel measurement, check the TU duration limit
-							if (pReqElem->Measurement.Channel != pAd->CommonCfg.Channel)
-								if (pReqElem->Measurement.Duration > pAd->StaCfg.CCXControl.field.TuLimit)
-									break;
-						}
-
-						// Save requests and execute actions later
-						NdisMoveMemory(&pAd->StaCfg.MeasurementRequest[Index], pReqElem, sizeof(RM_REQUEST_ACTION));
-						Index += 1;
-						break;
-
-					case MSRN_TYPE_FRAME_REQ:
-						// Since it's option, we will support later
-						// FrameRequestAction(pAd, pData);
-						break;
-
-					default:
-						break;
-				}
-
-				// Point to next Measurement request
-				pData  += sizeof(RM_REQUEST_ACTION);
-				Length -= sizeof(RM_REQUEST_ACTION);
-				break;
-
-			// We accept request only, all others are dropped
-			case IE_MEASUREMENT_REPORT:
-			case IE_AP_TX_POWER:
-			case IE_MEASUREMENT_CAPABILITY:
-			default:
-				return;
-		}
-	}
-
-	// 11. Update some flags and index
-	pAd->StaCfg.RMReqCnt = Index;
-
-	if (Index)
-	{
-		MlmeEnqueue(pAd, AIRONET_STATE_MACHINE, MT2_AIRONET_SCAN_REQ, 0, NULL);
-		RT28XX_MLME_HANDLER(pAd);
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<----- AironetMsgAction\n"));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	AironetRequestAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MLME_QUEUE_ELEM	*Elem)
-{
-	PRM_REQUEST_ACTION	pReq;
-
-	// 1. Point to next request element
-	pReq = (PRM_REQUEST_ACTION) &pAd->StaCfg.MeasurementRequest[pAd->StaCfg.CurrentRMReqIdx];
-
-	// 2. Parse measurement type and call appropriate functions
-	if (pReq->ReqElem.Type == MSRN_TYPE_CHANNEL_LOAD_REQ)
-		// Channel Load measurement request
-		ChannelLoadRequestAction(pAd, pAd->StaCfg.CurrentRMReqIdx);
-	else if (pReq->ReqElem.Type == MSRN_TYPE_NOISE_HIST_REQ)
-		// Noise Histogram measurement request
-		NoiseHistRequestAction(pAd, pAd->StaCfg.CurrentRMReqIdx);
-	else if (pReq->ReqElem.Type == MSRN_TYPE_BEACON_REQ)
-		// Beacon measurement request
-		BeaconRequestAction(pAd, pAd->StaCfg.CurrentRMReqIdx);
-	else
-		// Unknown. Do nothing and return, this should never happen
-		return;
-
-	// 3. Peek into the next request, if it's parallel, we will update the scan time to the largest one
-	if ((pAd->StaCfg.CurrentRMReqIdx + 1) < pAd->StaCfg.RMReqCnt)
-	{
-		pReq = (PRM_REQUEST_ACTION) &pAd->StaCfg.MeasurementRequest[pAd->StaCfg.CurrentRMReqIdx + 1];
-		// Check for parallel bit
-		if ((pReq->ReqElem.Mode & 0x01) && (pReq->Measurement.Channel == pAd->StaCfg.CCXScanChannel))
-		{
-			// Update parallel mode request information
-			pAd->StaCfg.ParallelReq = TRUE;
-			pAd->StaCfg.CCXScanTime = ((pReq->Measurement.Duration > pAd->StaCfg.CCXScanTime) ?
-			(pReq->Measurement.Duration) : (pAd->StaCfg.CCXScanTime));
-		}
-	}
-
-	// 4. Call RT28XX_MLME_HANDLER to execute the request mlme commands, Scan request is the only one used
-	RT28XX_MLME_HANDLER(pAd);
-
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Prepare channel load report action, special scan operation added
-		to support
-
-	Arguments:
-		pAd	Pointer	to our adapter
-		pData		Start from element ID
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	ChannelLoadRequestAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			Index)
-{
-	PRM_REQUEST_ACTION				pReq;
-	MLME_SCAN_REQ_STRUCT			ScanReq;
-	UCHAR							ZeroSsid[32];
-	NDIS_STATUS						NStatus;
-	PUCHAR							pOutBuffer = NULL;
-	PHEADER_802_11					pNullFrame;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("ChannelLoadRequestAction ----->\n"));
-
-	pReq = (PRM_REQUEST_ACTION) &pAd->StaCfg.MeasurementRequest[Index];
-	NdisZeroMemory(ZeroSsid, 32);
-
-	// Prepare for special scan request
-	// The scan definition is different with our Active, Passive scan definition.
-	// For CCX2, Active means send out probe request with broadcast BSSID.
-	// Passive means no probe request sent, only listen to the beacons.
-	// The channel scanned is fixed as specified, no need to scan all channels.
-	// The scan wait time is specified in the request too.
-	// Passive scan Mode
-
-	// Control state machine is not idle, reject the request
-	if ((pAd->Mlme.CntlMachine.CurrState != CNTL_IDLE) && (Index == 0))
-		return;
-
-	// Fill out stuff for scan request
-	ScanParmFill(pAd, &ScanReq, ZeroSsid, 0, BSS_ANY, SCAN_CISCO_CHANNEL_LOAD);
-	MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_SCAN_REQ, sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq);
-	pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_LIST_SCAN;
-
-	// Reset some internal control flags to make sure this scan works.
-	BssTableInit(&pAd->StaCfg.CCXBssTab);
-	pAd->StaCfg.ScanCnt        = 0;
-	pAd->StaCfg.CCXScanChannel = pReq->Measurement.Channel;
-	pAd->StaCfg.CCXScanTime    = pReq->Measurement.Duration;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Duration %d, Channel %d!\n", pReq->Measurement.Duration, pReq->Measurement.Channel));
-
-	// If it's non serving channel scan, send out a null frame with PSM bit on.
-	if (pAd->StaCfg.CCXScanChannel != pAd->CommonCfg.Channel)
-	{
-		// Use MLME enqueue method
-		NStatus = MlmeAllocateMemory(pAd, (PVOID)&pOutBuffer);  //Get an unused nonpaged memory
-		if (NStatus	!= NDIS_STATUS_SUCCESS)
-			return;
-
-		pNullFrame = (PHEADER_802_11) pOutBuffer;;
-		// Make the power save Null frame with PSM bit on
-		MgtMacHeaderInit(pAd, pNullFrame, SUBTYPE_NULL_FUNC, 1, pAd->CommonCfg.Bssid, pAd->CommonCfg.Bssid);
-		pNullFrame->Duration 	= 0;
-		pNullFrame->FC.Type 	= BTYPE_DATA;
-		pNullFrame->FC.PwrMgmt	= PWR_SAVE;
-
-		// Send using priority queue
-		MiniportMMRequest(pAd, 0, pOutBuffer, sizeof(HEADER_802_11));
-		MlmeFreeMemory(pAd, pOutBuffer);
-		DBGPRINT(RT_DEBUG_TRACE, ("Send PSM Data frame for off channel RM\n"));
-		RTMPusecDelay(5000);
-	}
-
-	pAd->StaCfg.CCXReqType     = MSRN_TYPE_CHANNEL_LOAD_REQ;
-	pAd->StaCfg.CLBusyBytes    = 0;
-	// Enable Rx with promiscuous reception
-	RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, 0x1010);
-
-	// Set channel load measurement flag
-	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_MEASUREMENT);
-
-	pAd->Mlme.AironetMachine.CurrState = AIRONET_SCANNING;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("ChannelLoadRequestAction <-----\n"));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Prepare noise histogram report action, special scan operation added
-		to support
-
-	Arguments:
-		pAd	Pointer	to our adapter
-		pData		Start from element ID
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	NoiseHistRequestAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			Index)
-{
-	PRM_REQUEST_ACTION				pReq;
-	MLME_SCAN_REQ_STRUCT			ScanReq;
-	UCHAR							ZeroSsid[32], i;
-	NDIS_STATUS						NStatus;
-	PUCHAR							pOutBuffer = NULL;
-	PHEADER_802_11					pNullFrame;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("NoiseHistRequestAction ----->\n"));
-
-	pReq = (PRM_REQUEST_ACTION) &pAd->StaCfg.MeasurementRequest[Index];
-	NdisZeroMemory(ZeroSsid, 32);
-
-	// Prepare for special scan request
-	// The scan definition is different with our Active, Passive scan definition.
-	// For CCX2, Active means send out probe request with broadcast BSSID.
-	// Passive means no probe request sent, only listen to the beacons.
-	// The channel scanned is fixed as specified, no need to scan all channels.
-	// The scan wait time is specified in the request too.
-	// Passive scan Mode
-
-	// Control state machine is not idle, reject the request
-	if ((pAd->Mlme.CntlMachine.CurrState != CNTL_IDLE) && (Index == 0))
-		return;
-
-	// Fill out stuff for scan request
-	ScanParmFill(pAd, &ScanReq, ZeroSsid, 0, BSS_ANY, SCAN_CISCO_NOISE);
-	MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_SCAN_REQ, sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq);
-	pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_LIST_SCAN;
-
-	// Reset some internal control flags to make sure this scan works.
-	BssTableInit(&pAd->StaCfg.CCXBssTab);
-	pAd->StaCfg.ScanCnt        = 0;
-	pAd->StaCfg.CCXScanChannel = pReq->Measurement.Channel;
-	pAd->StaCfg.CCXScanTime    = pReq->Measurement.Duration;
-	pAd->StaCfg.CCXReqType     = MSRN_TYPE_NOISE_HIST_REQ;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Duration %d, Channel %d!\n", pReq->Measurement.Duration, pReq->Measurement.Channel));
-
-	// If it's non serving channel scan, send out a null frame with PSM bit on.
-	if (pAd->StaCfg.CCXScanChannel != pAd->CommonCfg.Channel)
-	{
-		// Use MLME enqueue method
-		NStatus = MlmeAllocateMemory(pAd, (PVOID)&pOutBuffer);  //Get an unused nonpaged memory
-		if (NStatus	!= NDIS_STATUS_SUCCESS)
-			return;
-
-		pNullFrame = (PHEADER_802_11) pOutBuffer;
-		// Make the power save Null frame with PSM bit on
-		MgtMacHeaderInit(pAd, pNullFrame, SUBTYPE_NULL_FUNC, 1, pAd->CommonCfg.Bssid, pAd->CommonCfg.Bssid);
-		pNullFrame->Duration 	= 0;
-		pNullFrame->FC.Type  	= BTYPE_DATA;
-		pNullFrame->FC.PwrMgmt	= PWR_SAVE;
-
-		// Send using priority queue
-		MiniportMMRequest(pAd, 0, pOutBuffer, sizeof(HEADER_802_11));
-		MlmeFreeMemory(pAd, pOutBuffer);
-		DBGPRINT(RT_DEBUG_TRACE, ("Send PSM Data frame for off channel RM\n"));
-		RTMPusecDelay(5000);
-	}
-
-	// Reset the statistics
-	for (i = 0; i < 8; i++)
-		pAd->StaCfg.RPIDensity[i] = 0;
-
-	// Enable Rx with promiscuous reception
-	RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, 0x1010);
-
-	// Set channel load measurement flag
-	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_MEASUREMENT);
-
-	pAd->Mlme.AironetMachine.CurrState = AIRONET_SCANNING;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("NoiseHistRequestAction <-----\n"));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Prepare Beacon report action, special scan operation added
-		to support
-
-	Arguments:
-		pAd	Pointer	to our adapter
-		pData		Start from element ID
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	BeaconRequestAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			Index)
-{
-	PRM_REQUEST_ACTION				pReq;
-	NDIS_STATUS						NStatus;
-	PUCHAR							pOutBuffer = NULL;
-	PHEADER_802_11					pNullFrame;
-	MLME_SCAN_REQ_STRUCT			ScanReq;
-	UCHAR							ZeroSsid[32];
-
-	DBGPRINT(RT_DEBUG_TRACE, ("BeaconRequestAction ----->\n"));
-
-	pReq = (PRM_REQUEST_ACTION) &pAd->StaCfg.MeasurementRequest[Index];
-	NdisZeroMemory(ZeroSsid, 32);
-
-	// Prepare for special scan request
-	// The scan definition is different with our Active, Passive scan definition.
-	// For CCX2, Active means send out probe request with broadcast BSSID.
-	// Passive means no probe request sent, only listen to the beacons.
-	// The channel scanned is fixed as specified, no need to scan all channels.
-	// The scan wait time is specified in the request too.
-	if (pReq->Measurement.ScanMode == MSRN_SCAN_MODE_PASSIVE)
-	{
-		// Passive scan Mode
-		DBGPRINT(RT_DEBUG_TRACE, ("Passive Scan Mode!\n"));
-
-		// Control state machine is not idle, reject the request
-		if ((pAd->Mlme.CntlMachine.CurrState != CNTL_IDLE) && (Index == 0))
-			return;
-
-		// Fill out stuff for scan request
-		ScanParmFill(pAd, &ScanReq, ZeroSsid, 0, BSS_ANY, SCAN_CISCO_PASSIVE);
-		MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_SCAN_REQ, sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq);
-		pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_LIST_SCAN;
-
-		// Reset some internal control flags to make sure this scan works.
-		BssTableInit(&pAd->StaCfg.CCXBssTab);
-		pAd->StaCfg.ScanCnt        = 0;
-		pAd->StaCfg.CCXScanChannel = pReq->Measurement.Channel;
-		pAd->StaCfg.CCXScanTime    = pReq->Measurement.Duration;
-		pAd->StaCfg.CCXReqType     = MSRN_TYPE_BEACON_REQ;
-		DBGPRINT(RT_DEBUG_TRACE, ("Duration %d!\n", pReq->Measurement.Duration));
-
-		// If it's non serving channel scan, send out a null frame with PSM bit on.
-		if (pAd->StaCfg.CCXScanChannel != pAd->CommonCfg.Channel)
-		{
-			// Use MLME enqueue method
-			NStatus = MlmeAllocateMemory(pAd, (PVOID)&pOutBuffer);  //Get an unused nonpaged memory
-			if (NStatus	!= NDIS_STATUS_SUCCESS)
-				return;
-
-			pNullFrame = (PHEADER_802_11) pOutBuffer;
-			// Make the power save Null frame with PSM bit on
-			MgtMacHeaderInit(pAd, pNullFrame, SUBTYPE_NULL_FUNC, 1, pAd->CommonCfg.Bssid, pAd->CommonCfg.Bssid);
-			pNullFrame->Duration 	= 0;
-			pNullFrame->FC.Type     = BTYPE_DATA;
-			pNullFrame->FC.PwrMgmt  = PWR_SAVE;
-
-			// Send using priority queue
-			MiniportMMRequest(pAd, 0, pOutBuffer, sizeof(HEADER_802_11));
-			MlmeFreeMemory(pAd, pOutBuffer);
-			DBGPRINT(RT_DEBUG_TRACE, ("Send PSM Data frame for off channel RM\n"));
-			RTMPusecDelay(5000);
-		}
-
-		pAd->Mlme.AironetMachine.CurrState = AIRONET_SCANNING;
-	}
-	else if (pReq->Measurement.ScanMode == MSRN_SCAN_MODE_ACTIVE)
-	{
-		// Active scan Mode
-		DBGPRINT(RT_DEBUG_TRACE, ("Active Scan Mode!\n"));
-
-		// Control state machine is not idle, reject the request
-		if (pAd->Mlme.CntlMachine.CurrState != CNTL_IDLE)
-			return;
-
-		// Fill out stuff for scan request
-		ScanParmFill(pAd, &ScanReq, ZeroSsid, 0, BSS_ANY, SCAN_CISCO_ACTIVE);
-		MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_SCAN_REQ, sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq);
-		pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_LIST_SCAN;
-
-		// Reset some internal control flags to make sure this scan works.
-		BssTableInit(&pAd->StaCfg.CCXBssTab);
-		pAd->StaCfg.ScanCnt        = 0;
-		pAd->StaCfg.CCXScanChannel = pReq->Measurement.Channel;
-		pAd->StaCfg.CCXScanTime    = pReq->Measurement.Duration;
-		pAd->StaCfg.CCXReqType     = MSRN_TYPE_BEACON_REQ;
-		DBGPRINT(RT_DEBUG_TRACE, ("Duration %d!\n", pReq->Measurement.Duration));
-
-		// If it's non serving channel scan, send out a null frame with PSM bit on.
-		if (pAd->StaCfg.CCXScanChannel != pAd->CommonCfg.Channel)
-		{
-			// Use MLME enqueue method
-			NStatus = MlmeAllocateMemory(pAd, (PVOID)&pOutBuffer);  //Get an unused nonpaged memory
-			if (NStatus	!= NDIS_STATUS_SUCCESS)
-				return;
-
-			pNullFrame = (PHEADER_802_11) pOutBuffer;
-			// Make the power save Null frame with PSM bit on
-			MgtMacHeaderInit(pAd, pNullFrame, SUBTYPE_NULL_FUNC, 1, pAd->CommonCfg.Bssid, pAd->CommonCfg.Bssid);
-			pNullFrame->Duration 	= 0;
-			pNullFrame->FC.Type     = BTYPE_DATA;
-			pNullFrame->FC.PwrMgmt  = PWR_SAVE;
-
-			// Send using priority queue
-			MiniportMMRequest(pAd, 0, pOutBuffer, sizeof(HEADER_802_11));
-			MlmeFreeMemory(pAd, pOutBuffer);
-			DBGPRINT(RT_DEBUG_TRACE, ("Send PSM Data frame for off channel RM\n"));
-			RTMPusecDelay(5000);
-		}
-
-		pAd->Mlme.AironetMachine.CurrState = AIRONET_SCANNING;
-	}
-	else if (pReq->Measurement.ScanMode == MSRN_SCAN_MODE_BEACON_TABLE)
-	{
-		// Beacon report Mode, report all the APS in current bss table
-		DBGPRINT(RT_DEBUG_TRACE, ("Beacon Report Mode!\n"));
-
-		// Copy current BSS table to CCX table, we can omit this step later on.
-		NdisMoveMemory(&pAd->StaCfg.CCXBssTab, &pAd->ScanTab, sizeof(BSS_TABLE));
-
-		// Create beacon report from Bss table
-		AironetCreateBeaconReportFromBssTable(pAd);
-
-		// Set state to scanning
-		pAd->Mlme.AironetMachine.CurrState = AIRONET_SCANNING;
-
-		// Enqueue report request
-		// Cisco scan request is finished, prepare beacon report
-		MlmeEnqueue(pAd, AIRONET_STATE_MACHINE, MT2_AIRONET_SCAN_DONE, 0, NULL);
-	}
-	else
-	{
-		// Wrong scan Mode
-		DBGPRINT(RT_DEBUG_TRACE, ("Wrong Scan Mode!\n"));
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("BeaconRequestAction <-----\n"));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	AironetReportAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MLME_QUEUE_ELEM	*Elem)
-{
-	PRM_REQUEST_ACTION	pReq;
-	ULONG				Now32;
-
-    NdisGetSystemUpTime(&Now32);
-	pAd->StaCfg.LastBeaconRxTime = Now32;
-
-	pReq = (PRM_REQUEST_ACTION) &pAd->StaCfg.MeasurementRequest[pAd->StaCfg.CurrentRMReqIdx];
-
-	DBGPRINT(RT_DEBUG_TRACE, ("AironetReportAction ----->\n"));
-
-	// 1. Parse measurement type and call appropriate functions
-	if (pReq->ReqElem.Type == MSRN_TYPE_CHANNEL_LOAD_REQ)
-		// Channel Load measurement request
-		ChannelLoadReportAction(pAd, pAd->StaCfg.CurrentRMReqIdx);
-	else if (pReq->ReqElem.Type == MSRN_TYPE_NOISE_HIST_REQ)
-		// Noise Histogram measurement request
-		NoiseHistReportAction(pAd, pAd->StaCfg.CurrentRMReqIdx);
-	else if (pReq->ReqElem.Type == MSRN_TYPE_BEACON_REQ)
-		// Beacon measurement request
-		BeaconReportAction(pAd, pAd->StaCfg.CurrentRMReqIdx);
-	else
-		// Unknown. Do nothing and return
-		;
-
-	// 2. Point to the correct index of action element, start from 0
-	pAd->StaCfg.CurrentRMReqIdx++;
-
-	// 3. Check for parallel actions
-	if (pAd->StaCfg.ParallelReq == TRUE)
-	{
-		pReq = (PRM_REQUEST_ACTION) &pAd->StaCfg.MeasurementRequest[pAd->StaCfg.CurrentRMReqIdx];
-
-		// Process next action right away
-		if (pReq->ReqElem.Type == MSRN_TYPE_CHANNEL_LOAD_REQ)
-			// Channel Load measurement request
-			ChannelLoadReportAction(pAd, pAd->StaCfg.CurrentRMReqIdx);
-		else if (pReq->ReqElem.Type == MSRN_TYPE_NOISE_HIST_REQ)
-			// Noise Histogram measurement request
-			NoiseHistReportAction(pAd, pAd->StaCfg.CurrentRMReqIdx);
-
-		pAd->StaCfg.ParallelReq = FALSE;
-		pAd->StaCfg.CurrentRMReqIdx++;
-	}
-
-	if (pAd->StaCfg.CurrentRMReqIdx >= pAd->StaCfg.RMReqCnt)
-	{
-		// 4. There is no more unprocessed measurement request, go for transmit this report
-		AironetFinalReportAction(pAd);
-		pAd->Mlme.AironetMachine.CurrState = AIRONET_IDLE;
-	}
-	else
-	{
-		pReq = (PRM_REQUEST_ACTION) &pAd->StaCfg.MeasurementRequest[pAd->StaCfg.CurrentRMReqIdx];
-
-		if (pReq->Measurement.Channel != pAd->CommonCfg.Channel)
-		{
-			RTMPusecDelay(100000);
-		}
-
-		// 5. There are more requests to be measure
-		MlmeEnqueue(pAd, AIRONET_STATE_MACHINE, MT2_AIRONET_SCAN_REQ, 0, NULL);
-		RT28XX_MLME_HANDLER(pAd);
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("AironetReportAction <-----\n"));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	AironetFinalReportAction(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	PUCHAR					pDest;
-	PAIRONET_IAPP_HEADER	pIAPP;
-	PHEADER_802_11			pHeader;
-	UCHAR					AckRate = RATE_2;
-	USHORT					AckDuration = 0;
-	NDIS_STATUS				NStatus;
-	PUCHAR					pOutBuffer = NULL;
-	ULONG					FrameLen = 0;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("AironetFinalReportAction ----->\n"));
-
-	// 0. Set up the frame pointer, Frame was inited at the end of message action
-	pDest = &pAd->StaCfg.FrameReportBuf[LENGTH_802_11];
-
-	// 1. Update report IAPP fields
-	pIAPP = (PAIRONET_IAPP_HEADER) pDest;
-
-	// 2. Copy Cisco SNAP header
-	NdisMoveMemory(pIAPP->CiscoSnapHeader, SNAP_AIRONET, LENGTH_802_1_H);
-
-	// 3. network order for this 16bit length
-	pIAPP->Length  = cpu2be16(pAd->StaCfg.FrameReportLen - LENGTH_802_11 - LENGTH_802_1_H);
-
-	// 3.1 sanity check the report length, ignore it if there is nothing to report
-	if (be2cpu16(pIAPP->Length) <= 18)
-		return;
-
-	// 4. Type must be 0x32
-	pIAPP->Type    = AIRONET_IAPP_TYPE;
-
-	// 5. SubType for report must be 0x81
-	pIAPP->SubType = AIRONET_IAPP_SUBTYPE_REPORT;
-
-	// 6. DA is not used and must be zero, although the whole frame was cleared at the start of function
-	//    We will do it again here. We can use BSSID instead
-	COPY_MAC_ADDR(pIAPP->DA, pAd->CommonCfg.Bssid);
-
-	// 7. SA is the client reporting which must be our MAC
-	COPY_MAC_ADDR(pIAPP->SA, pAd->CurrentAddress);
-
-	// 8. Copy the saved dialog token
-	pIAPP->Token = pAd->StaCfg.IAPPToken;
-
-	// 9. Make the Report frame 802.11 header
-	//    Reuse function in wpa.c
-	pHeader = (PHEADER_802_11) pAd->StaCfg.FrameReportBuf;
-	pAd->Sequence ++;
-	WpaMacHeaderInit(pAd, pHeader, 0, pAd->CommonCfg.Bssid);
-
-	// ACK size	is 14 include CRC, and its rate	is based on real time information
-	AckRate     = pAd->CommonCfg.ExpectedACKRate[pAd->CommonCfg.MlmeRate];
-	AckDuration = RTMPCalcDuration(pAd, AckRate, 14);
-	pHeader->Duration = pAd->CommonCfg.Dsifs + AckDuration;
-
-	// Use MLME enqueue method
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-	if (NStatus	!= NDIS_STATUS_SUCCESS)
-		return;
-
-	// 10. Prepare report frame with dynamic outbuffer. Just simply copy everything.
-	MakeOutgoingFrame(pOutBuffer,                       &FrameLen,
-	                  pAd->StaCfg.FrameReportLen, pAd->StaCfg.FrameReportBuf,
-		              END_OF_ARGS);
-
-	// 11. Send using priority queue
-	MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-	pAd->StaCfg.CCXReqType = MSRN_TYPE_UNUSED;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("AironetFinalReportAction <-----\n"));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	ChannelLoadReportAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			Index)
-{
-	PMEASUREMENT_REPORT_ELEMENT	pReport;
-	PCHANNEL_LOAD_REPORT		pLoad;
-	PUCHAR						pDest;
-	UCHAR						CCABusyFraction;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("ChannelLoadReportAction ----->\n"));
-
-	// Disable Rx with promiscuous reception, make it back to normal
-	RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, STANORMAL); // Staion not drop control frame will fail WiFi Certification.
-
-	// 0. Setup pointer for processing beacon & probe response
-	pDest = (PUCHAR) &pAd->StaCfg.FrameReportBuf[pAd->StaCfg.FrameReportLen];
-	pReport = (PMEASUREMENT_REPORT_ELEMENT) pDest;
-
-	// 1. Fill Measurement report element field.
-	pReport->Eid    = IE_MEASUREMENT_REPORT;
-	// Fixed Length at 9, not include Eid and length fields
-	pReport->Length = 9;
-	pReport->Token  = pAd->StaCfg.MeasurementRequest[Index].ReqElem.Token;
-	pReport->Mode   = pAd->StaCfg.MeasurementRequest[Index].ReqElem.Mode;
-	pReport->Type   = MSRN_TYPE_CHANNEL_LOAD_REQ;
-
-	// 2. Fill channel report measurement data
-	pDest += sizeof(MEASUREMENT_REPORT_ELEMENT);
-	pLoad  = (PCHANNEL_LOAD_REPORT) pDest;
-	pLoad->Channel  = pAd->StaCfg.MeasurementRequest[Index].Measurement.Channel;
-	pLoad->Spare    = 0;
-	pLoad->Duration = pAd->StaCfg.MeasurementRequest[Index].Measurement.Duration;
-
-	// 3. Calculate the CCA Busy Fraction
-	//    (Bytes + ACK size) * 8 / Tx speed * 255 / 1000 / measurement duration, use 24 us Tx speed
-	//     =  (Bytes + ACK) / 12 / duration
-	//     9 is the good value for pAd->StaCfg.CLFactor
-	// CCABusyFraction = (UCHAR) (pAd->StaCfg.CLBusyBytes / 9 / pLoad->Duration);
-	CCABusyFraction = (UCHAR) (pAd->StaCfg.CLBusyBytes / pAd->StaCfg.CLFactor / pLoad->Duration);
-	if (CCABusyFraction < 10)
-			CCABusyFraction = (UCHAR) (pAd->StaCfg.CLBusyBytes / 3 / pLoad->Duration) + 1;
-
-	pLoad->CCABusy = CCABusyFraction;
-	DBGPRINT(RT_DEBUG_TRACE, ("CLBusyByte %ld, Duration %d, Result, %d\n", pAd->StaCfg.CLBusyBytes, pLoad->Duration, CCABusyFraction));
-
-	DBGPRINT(RT_DEBUG_TRACE, ("FrameReportLen %d\n", pAd->StaCfg.FrameReportLen));
-	pAd->StaCfg.FrameReportLen += (sizeof(MEASUREMENT_REPORT_ELEMENT) + sizeof(CHANNEL_LOAD_REPORT));
-	DBGPRINT(RT_DEBUG_TRACE, ("FrameReportLen %d\n", pAd->StaCfg.FrameReportLen));
-
-	// 4. Clear channel load measurement flag
-	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RADIO_MEASUREMENT);
-
-	// 5. reset to idle state
-	pAd->Mlme.AironetMachine.CurrState = AIRONET_IDLE;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("ChannelLoadReportAction <-----\n"));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	NoiseHistReportAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			Index)
-{
-	PMEASUREMENT_REPORT_ELEMENT	pReport;
-	PNOISE_HIST_REPORT			pNoise;
-	PUCHAR						pDest;
-	UCHAR						i,NoiseCnt;
-	USHORT						TotalRPICnt, TotalRPISum;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("NoiseHistReportAction ----->\n"));
-
-	// 0. Disable Rx with promiscuous reception, make it back to normal
-	RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, STANORMAL); // Staion not drop control frame will fail WiFi Certification.
-	// 1. Setup pointer for processing beacon & probe response
-	pDest = (PUCHAR) &pAd->StaCfg.FrameReportBuf[pAd->StaCfg.FrameReportLen];
-	pReport = (PMEASUREMENT_REPORT_ELEMENT) pDest;
-
-	// 2. Fill Measurement report element field.
-	pReport->Eid    = IE_MEASUREMENT_REPORT;
-	// Fixed Length at 16, not include Eid and length fields
-	pReport->Length = 16;
-	pReport->Token  = pAd->StaCfg.MeasurementRequest[Index].ReqElem.Token;
-	pReport->Mode   = pAd->StaCfg.MeasurementRequest[Index].ReqElem.Mode;
-	pReport->Type   = MSRN_TYPE_NOISE_HIST_REQ;
-
-	// 3. Fill noise histogram report measurement data
-	pDest += sizeof(MEASUREMENT_REPORT_ELEMENT);
-	pNoise  = (PNOISE_HIST_REPORT) pDest;
-	pNoise->Channel  = pAd->StaCfg.MeasurementRequest[Index].Measurement.Channel;
-	pNoise->Spare    = 0;
-	pNoise->Duration = pAd->StaCfg.MeasurementRequest[Index].Measurement.Duration;
-	// 4. Fill Noise histogram, the total RPI counts should be 0.4 * TU
-	//    We estimate 4000 normal packets received durning 10 seconds test.
-	//    Adjust it if required.
-	// 3 is a good value for pAd->StaCfg.NHFactor
-	// TotalRPICnt = pNoise->Duration * 3 / 10;
-	TotalRPICnt = pNoise->Duration * pAd->StaCfg.NHFactor / 10;
-	TotalRPISum = 0;
-
-	for (i = 0; i < 8; i++)
-	{
-		TotalRPISum += pAd->StaCfg.RPIDensity[i];
-		DBGPRINT(RT_DEBUG_TRACE, ("RPI %d Conuts %d\n", i, pAd->StaCfg.RPIDensity[i]));
-	}
-
-	// Double check if the counter is larger than our expectation.
-	// We will replace it with the total number plus a fraction.
-	if (TotalRPISum > TotalRPICnt)
-		TotalRPICnt = TotalRPISum + pNoise->Duration / 20;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Total RPI Conuts %d\n", TotalRPICnt));
-
-	// 5. Initialize noise count for the total summation of 0xff
-	NoiseCnt = 0;
-	for (i = 1; i < 8; i++)
-	{
-		pNoise->Density[i] = (UCHAR) (pAd->StaCfg.RPIDensity[i] * 255 / TotalRPICnt);
-		if ((pNoise->Density[i] == 0) && (pAd->StaCfg.RPIDensity[i] != 0))
-			pNoise->Density[i]++;
-		NoiseCnt += pNoise->Density[i];
-		DBGPRINT(RT_DEBUG_TRACE, ("Reported RPI[%d]  = 0x%02x\n", i, pNoise->Density[i]));
-	}
-
-	// 6. RPI[0] represents the rest of counts
-	pNoise->Density[0] = 0xff - NoiseCnt;
-	DBGPRINT(RT_DEBUG_TRACE, ("Reported RPI[0]  = 0x%02x\n", pNoise->Density[0]));
-
-	pAd->StaCfg.FrameReportLen += (sizeof(MEASUREMENT_REPORT_ELEMENT) + sizeof(NOISE_HIST_REPORT));
-
-	// 7. Clear channel load measurement flag
-	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RADIO_MEASUREMENT);
-
-	// 8. reset to idle state
-	pAd->Mlme.AironetMachine.CurrState = AIRONET_IDLE;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("NoiseHistReportAction <-----\n"));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Prepare Beacon report action,
-
-	Arguments:
-		pAd	Pointer	to our adapter
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	BeaconReportAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			Index)
-{
-	DBGPRINT(RT_DEBUG_TRACE, ("BeaconReportAction ----->\n"));
-
-	// Looks like we don't have anything thing need to do here.
-	// All measurement report already finished in AddBeaconReport
-	// The length is in the FrameReportLen
-
-	// reset Beacon index for next beacon request
-	pAd->StaCfg.LastBssIndex = 0xff;
-
-	// reset to idle state
-	pAd->Mlme.AironetMachine.CurrState = AIRONET_IDLE;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("BeaconReportAction <-----\n"));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-		Index		Current BSSID in CCXBsstab entry index
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-VOID	AironetAddBeaconReport(
-	IN	PRTMP_ADAPTER		pAd,
-	IN	ULONG				Index,
-	IN	PMLME_QUEUE_ELEM	pElem)
-{
-	PVOID						pMsg;
-	PUCHAR						pSrc, pDest;
-	UCHAR						ReqIdx;
-	ULONG						MsgLen;
-	USHORT						Length;
-	PFRAME_802_11				pFrame;
-	PMEASUREMENT_REPORT_ELEMENT	pReport;
-	PEID_STRUCT			        pEid;
-	PBEACON_REPORT				pBeaconReport;
-	PBSS_ENTRY					pBss;
-
-	// 0. Setup pointer for processing beacon & probe response
-	pMsg   = pElem->Msg;
-	MsgLen = pElem->MsgLen;
-	pFrame = (PFRAME_802_11) pMsg;
-	pSrc   = pFrame->Octet;				// Start from AP TSF
-	pBss   = (PBSS_ENTRY) &pAd->StaCfg.CCXBssTab.BssEntry[Index];
-	ReqIdx = pAd->StaCfg.CurrentRMReqIdx;
-
-	// 1 Check the Index, if we already create this entry, only update the average RSSI
-	if ((Index <= pAd->StaCfg.LastBssIndex) && (pAd->StaCfg.LastBssIndex != 0xff))
-	{
-		pDest  = (PUCHAR) &pAd->StaCfg.FrameReportBuf[pAd->StaCfg.BssReportOffset[Index]];
-		// Point to bss report information
-		pDest += sizeof(MEASUREMENT_REPORT_ELEMENT);
-		pBeaconReport = (PBEACON_REPORT) pDest;
-
-		// Update Rx power, in dBm
-		// Get the original RSSI readback from BBP
-		pBeaconReport->RxPower += pAd->BbpRssiToDbmDelta;
-		// Average the Rssi reading
-		pBeaconReport->RxPower  = (pBeaconReport->RxPower + pBss->Rssi) / 2;
-		// Get to dBm format
-		pBeaconReport->RxPower -= pAd->BbpRssiToDbmDelta;
-
-		DBGPRINT(RT_DEBUG_TRACE, ("Bssid %02x:%02x:%02x:%02x:%02x:%02x ",
-			pBss->Bssid[0], pBss->Bssid[1], pBss->Bssid[2],
-			pBss->Bssid[3], pBss->Bssid[4], pBss->Bssid[5]));
-		DBGPRINT(RT_DEBUG_TRACE, ("RxPower[%ld] Rssi %d, Avg Rssi %d\n", Index, (pBss->Rssi - pAd->BbpRssiToDbmDelta), pBeaconReport->RxPower - 256));
-		DBGPRINT(RT_DEBUG_TRACE, ("FrameReportLen = %d\n", pAd->StaCfg.BssReportOffset[Index]));
-
-		// Update other information here
-
-		// Done
-		return;
-	}
-
-	// 2. Update reported Index
-	pAd->StaCfg.LastBssIndex = Index;
-
-	// 3. Setup the buffer address for copying this BSSID into reporting frame
-	//    The offset should start after 802.11 header and report frame header.
-	pDest = (PUCHAR) &pAd->StaCfg.FrameReportBuf[pAd->StaCfg.FrameReportLen];
-
-	// 4. Save the start offset of each Bss in report frame
-	pAd->StaCfg.BssReportOffset[Index] = pAd->StaCfg.FrameReportLen;
-
-	// 5. Fill Measurement report fields
-	pReport = (PMEASUREMENT_REPORT_ELEMENT) pDest;
-	pReport->Eid = IE_MEASUREMENT_REPORT;
-	pReport->Length = 0;
-	pReport->Token  = pAd->StaCfg.MeasurementRequest[ReqIdx].ReqElem.Token;
-	pReport->Mode   = pAd->StaCfg.MeasurementRequest[ReqIdx].ReqElem.Mode;
-	pReport->Type   = MSRN_TYPE_BEACON_REQ;
-	Length          = sizeof(MEASUREMENT_REPORT_ELEMENT);
-	pDest          += sizeof(MEASUREMENT_REPORT_ELEMENT);
-
-	// 6. Start thebeacon report format
-	pBeaconReport = (PBEACON_REPORT) pDest;
-	pDest        += sizeof(BEACON_REPORT);
-	Length       += sizeof(BEACON_REPORT);
-
-	// 7. Copy Channel number
-	pBeaconReport->Channel        = pBss->Channel;
-	pBeaconReport->Spare          = 0;
-	pBeaconReport->Duration       = pAd->StaCfg.MeasurementRequest[ReqIdx].Measurement.Duration;
-	pBeaconReport->PhyType        = ((pBss->SupRateLen+pBss->ExtRateLen > 4) ? PHY_ERP : PHY_DSS);
-	// 8. Rx power, in dBm
-	pBeaconReport->RxPower        = pBss->Rssi - pAd->BbpRssiToDbmDelta;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Bssid %02x:%02x:%02x:%02x:%02x:%02x ",
-		pBss->Bssid[0], pBss->Bssid[1], pBss->Bssid[2],
-		pBss->Bssid[3], pBss->Bssid[4], pBss->Bssid[5]));
-	DBGPRINT(RT_DEBUG_TRACE, ("RxPower[%ld], Rssi %d\n", Index, pBeaconReport->RxPower - 256));
-	DBGPRINT(RT_DEBUG_TRACE, ("FrameReportLen = %d\n", pAd->StaCfg.FrameReportLen));
-
-	pBeaconReport->BeaconInterval = pBss->BeaconPeriod;
-	COPY_MAC_ADDR(pBeaconReport->BSSID, pFrame->Hdr.Addr3);
-	NdisMoveMemory(pBeaconReport->ParentTSF, pSrc, 4);
-	NdisMoveMemory(pBeaconReport->TargetTSF, &pElem->TimeStamp.u.LowPart, 4);
-	NdisMoveMemory(&pBeaconReport->TargetTSF[4], &pElem->TimeStamp.u.HighPart, 4);
-
-	// 9. Skip the beacon frame and offset to start of capabilityinfo since we already processed capabilityinfo
-	pSrc += (TIMESTAMP_LEN + 2);
-	pBeaconReport->CapabilityInfo = *(USHORT *)pSrc;
-
-	// 10. Point to start of element ID
-	pSrc += 2;
-	pEid = (PEID_STRUCT) pSrc;
-
-	// 11. Start process all variable Eid oayload and add the appropriate to the frame report
-	while (((PUCHAR) pEid + pEid->Len + 1) < ((PUCHAR) pFrame + MsgLen))
-	{
-		// Only limited EID are required to report for CCX 2. It includes SSID, Supported rate,
-		// FH paramenter set, DS parameter set, CF parameter set, IBSS parameter set,
-		// TIM (report first 4 bytes only, radio measurement capability
-		switch (pEid->Eid)
-		{
-			case IE_SSID:
-			case IE_SUPP_RATES:
-			case IE_FH_PARM:
-			case IE_DS_PARM:
-			case IE_CF_PARM:
-			case IE_IBSS_PARM:
-				NdisMoveMemory(pDest, pEid, pEid->Len + 2);
-				pDest  += (pEid->Len + 2);
-				Length += (pEid->Len + 2);
-				break;
-
-			case IE_MEASUREMENT_CAPABILITY:
-				// Since this IE is duplicated with WPA security IE, we has to do sanity check before
-				// recognize it.
-				// 1. It also has fixed 6 bytes IE length.
-				if (pEid->Len != 6)
-					break;
-				// 2. Check the Cisco Aironet OUI
-				if (NdisEqualMemory(CISCO_OUI, (pSrc + 2), 3))
-				{
-					// Matched, this is what we want
-					NdisMoveMemory(pDest, pEid, pEid->Len + 2);
-					pDest  += (pEid->Len + 2);
-					Length += (pEid->Len + 2);
-				}
-				break;
-
-			case IE_TIM:
-				if (pEid->Len > 4)
-				{
-					// May truncate and report the first 4 bytes only, with the eid & len, total should be 6
-					NdisMoveMemory(pDest, pEid, 6);
-					pDest  += 6;
-					Length += 6;
-				}
-				else
-				{
-					NdisMoveMemory(pDest, pEid, pEid->Len + 2);
-					pDest  += (pEid->Len + 2);
-					Length += (pEid->Len + 2);
-				}
-				break;
-
-			default:
-				break;
-		}
-		// 12. Move to next element ID
-		pSrc += (2 + pEid->Len);
-		pEid = (PEID_STRUCT) pSrc;
-	}
-
-	// 13. Update the length in the header, not include EID and length
-	pReport->Length = Length - 4;
-
-	// 14. Update the frame report buffer data length
-	pAd->StaCfg.FrameReportLen += Length;
-	DBGPRINT(RT_DEBUG_TRACE, ("FR len = %d\n", pAd->StaCfg.FrameReportLen));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-		Index		Current BSSID in CCXBsstab entry index
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-VOID	AironetCreateBeaconReportFromBssTable(
-	IN	PRTMP_ADAPTER		pAd)
-{
-	PMEASUREMENT_REPORT_ELEMENT	pReport;
-	PBEACON_REPORT				pBeaconReport;
-	UCHAR						Index, ReqIdx;
-	USHORT						Length;
-	PUCHAR						pDest;
-	PBSS_ENTRY					pBss;
-
-	// 0. setup base pointer
-	ReqIdx = pAd->StaCfg.CurrentRMReqIdx;
-
-	for (Index = 0; Index < pAd->StaCfg.CCXBssTab.BssNr; Index++)
-	{
-		// 1. Setup the buffer address for copying this BSSID into reporting frame
-		//    The offset should start after 802.11 header and report frame header.
-		pDest  = (PUCHAR) &pAd->StaCfg.FrameReportBuf[pAd->StaCfg.FrameReportLen];
-		pBss   = (PBSS_ENTRY) &pAd->StaCfg.CCXBssTab.BssEntry[Index];
-		Length = 0;
-
-		// 2. Fill Measurement report fields
-		pReport         = (PMEASUREMENT_REPORT_ELEMENT) pDest;
-		pReport->Eid    = IE_MEASUREMENT_REPORT;
-		pReport->Length = 0;
-		pReport->Token  = pAd->StaCfg.MeasurementRequest[ReqIdx].ReqElem.Token;
-		pReport->Mode   = pAd->StaCfg.MeasurementRequest[ReqIdx].ReqElem.Mode;
-		pReport->Type   = MSRN_TYPE_BEACON_REQ;
-		Length          = sizeof(MEASUREMENT_REPORT_ELEMENT);
-		pDest          += sizeof(MEASUREMENT_REPORT_ELEMENT);
-
-		// 3. Start the beacon report format
-		pBeaconReport = (PBEACON_REPORT) pDest;
-		pDest        += sizeof(BEACON_REPORT);
-		Length       += sizeof(BEACON_REPORT);
-
-		// 4. Copy Channel number
-		pBeaconReport->Channel        = pBss->Channel;
-		pBeaconReport->Spare          = 0;
-		pBeaconReport->Duration       = pAd->StaCfg.MeasurementRequest[ReqIdx].Measurement.Duration;
-		pBeaconReport->PhyType        = ((pBss->SupRateLen+pBss->ExtRateLen > 4) ? PHY_ERP : PHY_DSS);
-		pBeaconReport->RxPower        = pBss->Rssi - pAd->BbpRssiToDbmDelta;
-		pBeaconReport->BeaconInterval = pBss->BeaconPeriod;
-		pBeaconReport->CapabilityInfo = pBss->CapabilityInfo;
-		COPY_MAC_ADDR(pBeaconReport->BSSID, pBss->Bssid);
-		NdisMoveMemory(pBeaconReport->ParentTSF, pBss->PTSF, 4);
-		NdisMoveMemory(pBeaconReport->TargetTSF, pBss->TTSF, 8);
-
-		// 5. Create SSID
-		*pDest++ = 0x00;
-		*pDest++ = pBss->SsidLen;
-		NdisMoveMemory(pDest, pBss->Ssid, pBss->SsidLen);
-		pDest  += pBss->SsidLen;
-		Length += (2 + pBss->SsidLen);
-
-		// 6. Create SupportRates
-		*pDest++ = 0x01;
-		*pDest++ = pBss->SupRateLen;
-		NdisMoveMemory(pDest, pBss->SupRate, pBss->SupRateLen);
-		pDest  += pBss->SupRateLen;
-		Length += (2 + pBss->SupRateLen);
-
-		// 7. DS Parameter
-		*pDest++ = 0x03;
-		*pDest++ = 1;
-		*pDest++ = pBss->Channel;
-		Length  += 3;
-
-		// 8. IBSS parameter if presents
-		if (pBss->BssType == BSS_ADHOC)
-		{
-			*pDest++ = 0x06;
-			*pDest++ = 2;
-			*(PUSHORT) pDest = pBss->AtimWin;
-			pDest   += 2;
-			Length  += 4;
-		}
-
-		// 9. Update length field, not include EID and length
-		pReport->Length = Length - 4;
-
-		// 10. Update total frame size
-		pAd->StaCfg.FrameReportLen += Length;
-	}
-}
+#include "../../rt2860/sta/aironet.c"
diff --git a/drivers/staging/rt2870/sta/assoc.c b/drivers/staging/rt2870/sta/assoc.c
index a76dab500bc..46564d7a01a 100644
--- a/drivers/staging/rt2870/sta/assoc.c
+++ b/drivers/staging/rt2870/sta/assoc.c
@@ -1,2039 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	assoc.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	John		2004-9-3		porting from RT2500
-*/
-#include "../rt_config.h"
-
-UCHAR	CipherWpaTemplate[] = {
-		0xdd, 					// WPA IE
-		0x16,					// Length
-		0x00, 0x50, 0xf2, 0x01,	// oui
-		0x01, 0x00,				// Version
-		0x00, 0x50, 0xf2, 0x02,	// Multicast
-		0x01, 0x00,				// Number of unicast
-		0x00, 0x50, 0xf2, 0x02,	// unicast
-		0x01, 0x00,				// number of authentication method
-		0x00, 0x50, 0xf2, 0x01	// authentication
-		};
-
-UCHAR	CipherWpa2Template[] = {
-		0x30,					// RSN IE
-		0x14,					// Length
-		0x01, 0x00,				// Version
-		0x00, 0x0f, 0xac, 0x02,	// group cipher, TKIP
-		0x01, 0x00,				// number of pairwise
-		0x00, 0x0f, 0xac, 0x02,	// unicast
-		0x01, 0x00,				// number of authentication method
-		0x00, 0x0f, 0xac, 0x02,	// authentication
-		0x00, 0x00,				// RSN capability
-		};
-
-UCHAR	Ccx2IeInfo[] = { 0x00, 0x40, 0x96, 0x03, 0x02};
-
-/*
-	==========================================================================
-	Description:
-		association state machine init, including state transition and timer init
-	Parameters:
-		S - pointer to the association state machine
-
-	IRQL = PASSIVE_LEVEL
-
-	==========================================================================
- */
-VOID AssocStateMachineInit(
-	IN	PRTMP_ADAPTER	pAd,
-	IN  STATE_MACHINE *S,
-	OUT STATE_MACHINE_FUNC Trans[])
-{
-	StateMachineInit(S, Trans, MAX_ASSOC_STATE, MAX_ASSOC_MSG, (STATE_MACHINE_FUNC)Drop, ASSOC_IDLE, ASSOC_MACHINE_BASE);
-
-	// first column
-	StateMachineSetAction(S, ASSOC_IDLE, MT2_MLME_ASSOC_REQ, (STATE_MACHINE_FUNC)MlmeAssocReqAction);
-	StateMachineSetAction(S, ASSOC_IDLE, MT2_MLME_REASSOC_REQ, (STATE_MACHINE_FUNC)MlmeReassocReqAction);
-	StateMachineSetAction(S, ASSOC_IDLE, MT2_MLME_DISASSOC_REQ, (STATE_MACHINE_FUNC)MlmeDisassocReqAction);
-	StateMachineSetAction(S, ASSOC_IDLE, MT2_PEER_DISASSOC_REQ, (STATE_MACHINE_FUNC)PeerDisassocAction);
-
-	// second column
-	StateMachineSetAction(S, ASSOC_WAIT_RSP, MT2_MLME_ASSOC_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenAssoc);
-	StateMachineSetAction(S, ASSOC_WAIT_RSP, MT2_MLME_REASSOC_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenReassoc);
-	StateMachineSetAction(S, ASSOC_WAIT_RSP, MT2_MLME_DISASSOC_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenDisassociate);
-	StateMachineSetAction(S, ASSOC_WAIT_RSP, MT2_PEER_DISASSOC_REQ, (STATE_MACHINE_FUNC)PeerDisassocAction);
-	StateMachineSetAction(S, ASSOC_WAIT_RSP, MT2_PEER_ASSOC_RSP, (STATE_MACHINE_FUNC)PeerAssocRspAction);
-	//
-	// Patch 3Com AP MOde:3CRWE454G72
-	// We send Assoc request frame to this AP, it always send Reassoc Rsp not Associate Rsp.
-	//
-	StateMachineSetAction(S, ASSOC_WAIT_RSP, MT2_PEER_REASSOC_RSP, (STATE_MACHINE_FUNC)PeerAssocRspAction);
-	StateMachineSetAction(S, ASSOC_WAIT_RSP, MT2_ASSOC_TIMEOUT, (STATE_MACHINE_FUNC)AssocTimeoutAction);
-
-	// third column
-	StateMachineSetAction(S, REASSOC_WAIT_RSP, MT2_MLME_ASSOC_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenAssoc);
-	StateMachineSetAction(S, REASSOC_WAIT_RSP, MT2_MLME_REASSOC_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenReassoc);
-	StateMachineSetAction(S, REASSOC_WAIT_RSP, MT2_MLME_DISASSOC_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenDisassociate);
-	StateMachineSetAction(S, REASSOC_WAIT_RSP, MT2_PEER_DISASSOC_REQ, (STATE_MACHINE_FUNC)PeerDisassocAction);
-	StateMachineSetAction(S, REASSOC_WAIT_RSP, MT2_PEER_REASSOC_RSP, (STATE_MACHINE_FUNC)PeerReassocRspAction);
-	//
-	// Patch, AP doesn't send Reassociate Rsp frame to Station.
-	//
-	StateMachineSetAction(S, REASSOC_WAIT_RSP, MT2_PEER_ASSOC_RSP, (STATE_MACHINE_FUNC)PeerReassocRspAction);
-	StateMachineSetAction(S, REASSOC_WAIT_RSP, MT2_REASSOC_TIMEOUT, (STATE_MACHINE_FUNC)ReassocTimeoutAction);
-
-	// fourth column
-	StateMachineSetAction(S, DISASSOC_WAIT_RSP, MT2_MLME_ASSOC_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenAssoc);
-	StateMachineSetAction(S, DISASSOC_WAIT_RSP, MT2_MLME_REASSOC_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenReassoc);
-	StateMachineSetAction(S, DISASSOC_WAIT_RSP, MT2_MLME_DISASSOC_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenDisassociate);
-	StateMachineSetAction(S, DISASSOC_WAIT_RSP, MT2_PEER_DISASSOC_REQ, (STATE_MACHINE_FUNC)PeerDisassocAction);
-	StateMachineSetAction(S, DISASSOC_WAIT_RSP, MT2_DISASSOC_TIMEOUT, (STATE_MACHINE_FUNC)DisassocTimeoutAction);
-
-	// initialize the timer
-	RTMPInitTimer(pAd, &pAd->MlmeAux.AssocTimer, GET_TIMER_FUNCTION(AssocTimeout), pAd, FALSE);
-	RTMPInitTimer(pAd, &pAd->MlmeAux.ReassocTimer, GET_TIMER_FUNCTION(ReassocTimeout), pAd, FALSE);
-	RTMPInitTimer(pAd, &pAd->MlmeAux.DisassocTimer, GET_TIMER_FUNCTION(DisassocTimeout), pAd, FALSE);
-}
-
-/*
-	==========================================================================
-	Description:
-		Association timeout procedure. After association timeout, this function
-		will be called and it will put a message into the MLME queue
-	Parameters:
-		Standard timer parameters
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AssocTimeout(IN PVOID SystemSpecific1,
-				 IN PVOID FunctionContext,
-				 IN PVOID SystemSpecific2,
-				 IN PVOID SystemSpecific3)
-{
-	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;
-
-	// Do nothing if the driver is starting halt state.
-	// This might happen when timer already been fired before cancel timer with mlmehalt
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
-		return;
-
-	MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_ASSOC_TIMEOUT, 0, NULL);
-	RT28XX_MLME_HANDLER(pAd);
-}
-
-/*
-	==========================================================================
-	Description:
-		Reassociation timeout procedure. After reassociation timeout, this
-		function will be called and put a message into the MLME queue
-	Parameters:
-		Standard timer parameters
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID ReassocTimeout(IN PVOID SystemSpecific1,
-					IN PVOID FunctionContext,
-					IN PVOID SystemSpecific2,
-					IN PVOID SystemSpecific3)
-{
-	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;
-
-	// Do nothing if the driver is starting halt state.
-	// This might happen when timer already been fired before cancel timer with mlmehalt
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
-		return;
-
-	MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_REASSOC_TIMEOUT, 0, NULL);
-	RT28XX_MLME_HANDLER(pAd);
-}
-
-/*
-	==========================================================================
-	Description:
-		Disassociation timeout procedure. After disassociation timeout, this
-		function will be called and put a message into the MLME queue
-	Parameters:
-		Standard timer parameters
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID DisassocTimeout(IN PVOID SystemSpecific1,
-					IN PVOID FunctionContext,
-					IN PVOID SystemSpecific2,
-					IN PVOID SystemSpecific3)
-{
-	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;
-
-	// Do nothing if the driver is starting halt state.
-	// This might happen when timer already been fired before cancel timer with mlmehalt
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
-		return;
-
-	MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_DISASSOC_TIMEOUT, 0, NULL);
-	RT28XX_MLME_HANDLER(pAd);
-}
-
-/*
-	==========================================================================
-	Description:
-		mlme assoc req handling procedure
-	Parameters:
-		Adapter - Adapter pointer
-		Elem - MLME Queue Element
-	Pre:
-		the station has been authenticated and the following information is stored in the config
-			-# SSID
-			-# supported rates and their length
-			-# listen interval (Adapter->StaCfg.default_listen_count)
-			-# Transmit power  (Adapter->StaCfg.tx_power)
-	Post  :
-		-# An association request frame is generated and sent to the air
-		-# Association timer starts
-		-# Association state -> ASSOC_WAIT_RSP
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID MlmeAssocReqAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR			ApAddr[6];
-	HEADER_802_11	AssocHdr;
-	UCHAR			Ccx2Len = 5;
-	UCHAR			WmeIe[9] = {IE_VENDOR_SPECIFIC, 0x07, 0x00, 0x50, 0xf2, 0x02, 0x00, 0x01, 0x00};
-	USHORT			ListenIntv;
-	ULONG			Timeout;
-	USHORT			CapabilityInfo;
-	BOOLEAN			TimerCancelled;
-	PUCHAR			pOutBuffer = NULL;
-	NDIS_STATUS		NStatus;
-	ULONG			FrameLen = 0;
-	ULONG			tmp;
-	USHORT			VarIesOffset;
-	UCHAR			CkipFlag;
-	UCHAR			CkipNegotiationBuffer[CKIP_NEGOTIATION_LENGTH];
-	UCHAR			AironetCkipIe = IE_AIRONET_CKIP;
-	UCHAR			AironetCkipLen = CKIP_NEGOTIATION_LENGTH;
-	UCHAR			AironetIPAddressIE = IE_AIRONET_IPADDRESS;
-	UCHAR			AironetIPAddressLen = AIRONET_IPADDRESS_LENGTH;
-	UCHAR			AironetIPAddressBuffer[AIRONET_IPADDRESS_LENGTH] = {0x00, 0x40, 0x96, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00};
-	USHORT			Status;
-
-	// Block all authentication request durning WPA block period
-	if (pAd->StaCfg.bBlockAssoc == TRUE)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - Block Assoc request durning WPA block period!\n"));
-		pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-		Status = MLME_STATE_MACHINE_REJECT;
-		MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_ASSOC_CONF, 2, &Status);
-	}
-	// check sanity first
-	else if (MlmeAssocReqSanity(pAd, Elem->Msg, Elem->MsgLen, ApAddr, &CapabilityInfo, &Timeout, &ListenIntv))
-	{
-		RTMPCancelTimer(&pAd->MlmeAux.AssocTimer, &TimerCancelled);
-		COPY_MAC_ADDR(pAd->MlmeAux.Bssid, ApAddr);
-
-		// Get an unused nonpaged memory
-		NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);
-		if (NStatus != NDIS_STATUS_SUCCESS)
-		{
-			DBGPRINT(RT_DEBUG_TRACE,("ASSOC - MlmeAssocReqAction() allocate memory failed \n"));
-			pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-			Status = MLME_FAIL_NO_RESOURCE;
-			MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_ASSOC_CONF, 2, &Status);
-			return;
-		}
-
-		// Add by James 03/06/27
-		pAd->StaCfg.AssocInfo.Length = sizeof(NDIS_802_11_ASSOCIATION_INFORMATION);
-		// Association don't need to report MAC address
-		pAd->StaCfg.AssocInfo.AvailableRequestFixedIEs =
-			NDIS_802_11_AI_REQFI_CAPABILITIES | NDIS_802_11_AI_REQFI_LISTENINTERVAL;
-		pAd->StaCfg.AssocInfo.RequestFixedIEs.Capabilities = CapabilityInfo;
-		pAd->StaCfg.AssocInfo.RequestFixedIEs.ListenInterval = ListenIntv;
-		// Only reassociate need this
-		//COPY_MAC_ADDR(pAd->StaCfg.AssocInfo.RequestFixedIEs.CurrentAPAddress, ApAddr);
-		pAd->StaCfg.AssocInfo.OffsetRequestIEs = sizeof(NDIS_802_11_ASSOCIATION_INFORMATION);
-
-        NdisZeroMemory(pAd->StaCfg.ReqVarIEs, MAX_VIE_LEN);
-		// First add SSID
-		VarIesOffset = 0;
-		NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, &SsidIe, 1);
-		VarIesOffset += 1;
-		NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, &pAd->MlmeAux.SsidLen, 1);
-		VarIesOffset += 1;
-		NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen);
-		VarIesOffset += pAd->MlmeAux.SsidLen;
-
-		// Second add Supported rates
-		NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, &SupRateIe, 1);
-		VarIesOffset += 1;
-		NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, &pAd->MlmeAux.SupRateLen, 1);
-		VarIesOffset += 1;
-		NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, pAd->MlmeAux.SupRate, pAd->MlmeAux.SupRateLen);
-		VarIesOffset += pAd->MlmeAux.SupRateLen;
-		// End Add by James
-
-        if ((pAd->CommonCfg.Channel > 14) &&
-            (pAd->CommonCfg.bIEEE80211H == TRUE))
-            CapabilityInfo |= 0x0100;
-
-		DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - Send ASSOC request...\n"));
-		MgtMacHeaderInit(pAd, &AssocHdr, SUBTYPE_ASSOC_REQ, 0, ApAddr, ApAddr);
-
-		// Build basic frame first
-		MakeOutgoingFrame(pOutBuffer,				&FrameLen,
-						  sizeof(HEADER_802_11),	&AssocHdr,
-						  2,						&CapabilityInfo,
-						  2,						&ListenIntv,
-						  1,						&SsidIe,
-						  1,						&pAd->MlmeAux.SsidLen,
-						  pAd->MlmeAux.SsidLen, 	pAd->MlmeAux.Ssid,
-						  1,						&SupRateIe,
-						  1,						&pAd->MlmeAux.SupRateLen,
-						  pAd->MlmeAux.SupRateLen,  pAd->MlmeAux.SupRate,
-						  END_OF_ARGS);
-
-		if (pAd->MlmeAux.ExtRateLen != 0)
-		{
-			MakeOutgoingFrame(pOutBuffer + FrameLen,    &tmp,
-							  1,                        &ExtRateIe,
-							  1,                        &pAd->MlmeAux.ExtRateLen,
-							  pAd->MlmeAux.ExtRateLen,  pAd->MlmeAux.ExtRate,
-							  END_OF_ARGS);
-			FrameLen += tmp;
-		}
-
-#ifdef DOT11_N_SUPPORT
-		// HT
-		if ((pAd->MlmeAux.HtCapabilityLen > 0) && (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
-		{
-			ULONG TmpLen;
-			UCHAR HtLen;
-			UCHAR BROADCOM[4] = {0x0, 0x90, 0x4c, 0x33};
-			if (pAd->StaActive.SupportedPhyInfo.bPreNHt == TRUE)
-			{
-				HtLen = SIZE_HT_CAP_IE + 4;
-				MakeOutgoingFrame(pOutBuffer + FrameLen,            &TmpLen,
-							  1,                                &WpaIe,
-							  1,                                &HtLen,
-							  4,                                &BROADCOM[0],
-							 pAd->MlmeAux.HtCapabilityLen,          &pAd->MlmeAux.HtCapability,
-							  END_OF_ARGS);
-			}
-			else
-			{
-#ifdef RT_BIG_ENDIAN
-		        HT_CAPABILITY_IE HtCapabilityTmp;
-#endif
-
-#ifndef RT_BIG_ENDIAN
-				MakeOutgoingFrame(pOutBuffer + FrameLen,            &TmpLen,
-							  1,                                &HtCapIe,
-							  1,                                &pAd->MlmeAux.HtCapabilityLen,
-							 pAd->MlmeAux.HtCapabilityLen,          &pAd->MlmeAux.HtCapability,
-							  END_OF_ARGS);
-#else
-                NdisZeroMemory(&HtCapabilityTmp, sizeof(HT_CAPABILITY_IE));
-                NdisMoveMemory(&HtCapabilityTmp, &pAd->MlmeAux.HtCapability, pAd->MlmeAux.HtCapabilityLen);
-        		*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
-        		*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
-
-        		MakeOutgoingFrame(pOutBuffer + FrameLen,         &TmpLen,
-        							1,                           &HtCapIe,
-        							1,                           &pAd->MlmeAux.HtCapabilityLen,
-        							pAd->MlmeAux.HtCapabilityLen,&HtCapabilityTmp,
-        							END_OF_ARGS);
-#endif
-			}
-			FrameLen += TmpLen;
-		}
-#endif // DOT11_N_SUPPORT //
-
-		// add Ralink proprietary IE to inform AP this STA is going to use AGGREGATION or PIGGY-BACK+AGGREGATION
-		// Case I: (Aggregation + Piggy-Back)
-		// 1. user enable aggregation, AND
-		// 2. Mac support piggy-back
-		// 3. AP annouces it's PIGGY-BACK+AGGREGATION-capable in BEACON
-		// Case II: (Aggregation)
-		// 1. user enable aggregation, AND
-		// 2. AP annouces it's AGGREGATION-capable in BEACON
-		if (pAd->CommonCfg.bAggregationCapable)
-		{
-			if ((pAd->CommonCfg.bPiggyBackCapable) && ((pAd->MlmeAux.APRalinkIe & 0x00000003) == 3))
-			{
-				ULONG TmpLen;
-				UCHAR RalinkIe[9] = {IE_VENDOR_SPECIFIC, 7, 0x00, 0x0c, 0x43, 0x03, 0x00, 0x00, 0x00};
-				MakeOutgoingFrame(pOutBuffer+FrameLen,           &TmpLen,
-								  9,                             RalinkIe,
-								  END_OF_ARGS);
-				FrameLen += TmpLen;
-			}
-			else if (pAd->MlmeAux.APRalinkIe & 0x00000001)
-			{
-				ULONG TmpLen;
-				UCHAR RalinkIe[9] = {IE_VENDOR_SPECIFIC, 7, 0x00, 0x0c, 0x43, 0x01, 0x00, 0x00, 0x00};
-				MakeOutgoingFrame(pOutBuffer+FrameLen,           &TmpLen,
-								  9,                             RalinkIe,
-								  END_OF_ARGS);
-				FrameLen += TmpLen;
-			}
-		}
-		else
-		{
-			ULONG TmpLen;
-			UCHAR RalinkIe[9] = {IE_VENDOR_SPECIFIC, 7, 0x00, 0x0c, 0x43, 0x06, 0x00, 0x00, 0x00};
-			MakeOutgoingFrame(pOutBuffer+FrameLen,		 &TmpLen,
-							  9,						 RalinkIe,
-							  END_OF_ARGS);
-			FrameLen += TmpLen;
-		}
-
-		if (pAd->MlmeAux.APEdcaParm.bValid)
-		{
-			if (pAd->CommonCfg.bAPSDCapable && pAd->MlmeAux.APEdcaParm.bAPSDCapable)
-			{
-				QBSS_STA_INFO_PARM QosInfo;
-
-				NdisZeroMemory(&QosInfo, sizeof(QBSS_STA_INFO_PARM));
-				QosInfo.UAPSD_AC_BE = pAd->CommonCfg.bAPSDAC_BE;
-				QosInfo.UAPSD_AC_BK = pAd->CommonCfg.bAPSDAC_BK;
-				QosInfo.UAPSD_AC_VI = pAd->CommonCfg.bAPSDAC_VI;
-				QosInfo.UAPSD_AC_VO = pAd->CommonCfg.bAPSDAC_VO;
-				QosInfo.MaxSPLength = pAd->CommonCfg.MaxSPLength;
-				WmeIe[8] |= *(PUCHAR)&QosInfo;
-			}
-			else
-			{
-                // The Parameter Set Count is set to ¡§0¡¨ in the association request frames
-                // WmeIe[8] |= (pAd->MlmeAux.APEdcaParm.EdcaUpdateCount & 0x0f);
-			}
-
-			MakeOutgoingFrame(pOutBuffer + FrameLen,    &tmp,
-							  9,                        &WmeIe[0],
-							  END_OF_ARGS);
-			FrameLen += tmp;
-		}
-
-		//
-		// Let WPA(#221) Element ID on the end of this association frame.
-		// Otherwise some AP will fail on parsing Element ID and set status fail on Assoc Rsp.
-		// For example: Put Vendor Specific IE on the front of WPA IE.
-		// This happens on AP (Model No:Linksys WRK54G)
-		//
-		if (((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
-            (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK) ||
-            (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) ||
-            (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2)
-			)
-            )
-		{
-			UCHAR RSNIe = IE_WPA;
-
-			if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK) ||
-                (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2))
-			{
-				RSNIe = IE_WPA2;
-			}
-
-            	RTMPMakeRSNIE(pAd, pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus, BSS0);
-
-            // Check for WPA PMK cache list
-			if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2)
-			{
-			    INT     idx;
-                BOOLEAN FoundPMK = FALSE;
-				// Search chched PMKID, append it if existed
-				for (idx = 0; idx < PMKID_NO; idx++)
-				{
-					if (NdisEqualMemory(ApAddr, &pAd->StaCfg.SavedPMK[idx].BSSID, 6))
-					{
-						FoundPMK = TRUE;
-						break;
-					}
-				}
-
-				if (FoundPMK)
-				{
-					// Set PMK number
-					*(PUSHORT) &pAd->StaCfg.RSN_IE[pAd->StaCfg.RSNIE_Len] = 1;
-					NdisMoveMemory(&pAd->StaCfg.RSN_IE[pAd->StaCfg.RSNIE_Len + 2], &pAd->StaCfg.SavedPMK[idx].PMKID, 16);
-                    pAd->StaCfg.RSNIE_Len += 18;
-				}
-			}
-
-			{
-				MakeOutgoingFrame(pOutBuffer + FrameLen,    		&tmp,
-				              		1,                              &RSNIe,
-		                        	1,                              &pAd->StaCfg.RSNIE_Len,
-		                        	pAd->StaCfg.RSNIE_Len,			pAd->StaCfg.RSN_IE,
-		                        	END_OF_ARGS);
-			}
-
-			FrameLen += tmp;
-
-			{
-	            // Append Variable IE
-	            NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, &RSNIe, 1);
-	            VarIesOffset += 1;
-	            NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, &pAd->StaCfg.RSNIE_Len, 1);
-	            VarIesOffset += 1;
-			}
-			NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, pAd->StaCfg.RSN_IE, pAd->StaCfg.RSNIE_Len);
-			VarIesOffset += pAd->StaCfg.RSNIE_Len;
-
-			// Set Variable IEs Length
-			pAd->StaCfg.ReqVarIELen = VarIesOffset;
-		}
-
-		// We have update that at PeerBeaconAtJoinRequest()
-		CkipFlag = pAd->StaCfg.CkipFlag;
-		if (CkipFlag != 0)
-		{
-			NdisZeroMemory(CkipNegotiationBuffer, CKIP_NEGOTIATION_LENGTH);
-			CkipNegotiationBuffer[2] = 0x66;
-			// Make it try KP & MIC, since we have to follow the result from AssocRsp
-			CkipNegotiationBuffer[8] = 0x18;
-			CkipNegotiationBuffer[CKIP_NEGOTIATION_LENGTH - 1] = 0x22;
-			CkipFlag = 0x18;
-
-			MakeOutgoingFrame(pOutBuffer + FrameLen, 	&tmp,
-						1,						  		&AironetCkipIe,
-						1,						  		&AironetCkipLen,
-						AironetCkipLen, 		  		CkipNegotiationBuffer,
-						END_OF_ARGS);
-			FrameLen += tmp;
-		}
-
-		// Add CCX v2 request if CCX2 admin state is on
-		if (pAd->StaCfg.CCXControl.field.Enable == 1)
-		{
-
-			//
-			// Add AironetIPAddressIE for Cisco CCX 2.X
-			// Add CCX Version
-			//
-			MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp,
-						1,							&AironetIPAddressIE,
-						1,							&AironetIPAddressLen,
-						AironetIPAddressLen,		AironetIPAddressBuffer,
-						1,							&Ccx2Ie,
-						1,							&Ccx2Len,
-						Ccx2Len,				    Ccx2IeInfo,
-						END_OF_ARGS);
-			FrameLen += tmp;
-
-			//
-			// Add CipherSuite CCKM or LeapTkip if setting.
-			//
-#ifdef LEAP_SUPPORT
-			if (LEAP_CCKM_ON(pAd))
-			{
-				MakeOutgoingFrame(pOutBuffer + FrameLen,	&tmp,
-						CipherSuiteCiscoCCKMLen,		CipherSuiteCiscoCCKM,
-						END_OF_ARGS);
-				FrameLen += tmp;
-
-				// Third add RSN
-				NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, CipherSuiteCiscoCCKM, CipherSuiteCiscoCCKMLen); //Save CipherSuite
-				VarIesOffset += CipherSuiteCiscoCCKMLen;
-			}
-			else if ((pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP) && (pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled))
-			{
-				MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp,
-						CipherSuiteCCXTkipLen,	    CipherSuiteCCXTkip,
-						END_OF_ARGS);
-				FrameLen += tmp;
-
-				// Third add RSN
-				NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, CipherSuiteCCXTkip, CipherSuiteCCXTkipLen);
-				VarIesOffset += CipherSuiteCCXTkipLen;
-			}
-#endif // LEAP_SUPPORT //
-
-			// Add by James 03/06/27
-			// Set Variable IEs Length
-			pAd->StaCfg.ReqVarIELen = VarIesOffset;
-			pAd->StaCfg.AssocInfo.RequestIELength = VarIesOffset;
-
-			// OffsetResponseIEs follow ReqVarIE
-			pAd->StaCfg.AssocInfo.OffsetResponseIEs = sizeof(NDIS_802_11_ASSOCIATION_INFORMATION) + pAd->StaCfg.ReqVarIELen;
-			// End Add by James
-		}
-
-
-		MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-		MlmeFreeMemory(pAd, pOutBuffer);
-
-		RTMPSetTimer(&pAd->MlmeAux.AssocTimer, Timeout);
-		pAd->Mlme.AssocMachine.CurrState = ASSOC_WAIT_RSP;
-	}
-	else
-	{
-		DBGPRINT(RT_DEBUG_TRACE,("ASSOC - MlmeAssocReqAction() sanity check failed. BUG!!!!!! \n"));
-		pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-		Status = MLME_INVALID_FORMAT;
-		MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_ASSOC_CONF, 2, &Status);
-	}
-
-}
-
-/*
-	==========================================================================
-	Description:
-		mlme reassoc req handling procedure
-	Parameters:
-		Elem -
-	Pre:
-		-# SSID  (Adapter->StaCfg.ssid[])
-		-# BSSID (AP address, Adapter->StaCfg.bssid)
-		-# Supported rates (Adapter->StaCfg.supported_rates[])
-		-# Supported rates length (Adapter->StaCfg.supported_rates_len)
-		-# Tx power (Adapter->StaCfg.tx_power)
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID MlmeReassocReqAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR			ApAddr[6];
-	HEADER_802_11	ReassocHdr;
-	UCHAR			Ccx2Len = 5;
-	UCHAR			WmeIe[9] = {IE_VENDOR_SPECIFIC, 0x07, 0x00, 0x50, 0xf2, 0x02, 0x00, 0x01, 0x00};
-	USHORT			CapabilityInfo, ListenIntv;
-	ULONG			Timeout;
-	ULONG			FrameLen = 0;
-	BOOLEAN			TimerCancelled;
-	NDIS_STATUS		NStatus;
-	ULONG			tmp;
-	PUCHAR			pOutBuffer = NULL;
-//CCX 2.X
-#ifdef LEAP_SUPPORT
-	UCHAR			CkipFlag;
-	UCHAR			CkipNegotiationBuffer[CKIP_NEGOTIATION_LENGTH];
-	UCHAR			AironetCkipIe = IE_AIRONET_CKIP;
-	UCHAR			AironetCkipLen = CKIP_NEGOTIATION_LENGTH;
-	UCHAR			AironetIPAddressIE = IE_AIRONET_IPADDRESS;
-	UCHAR			AironetIPAddressLen = AIRONET_IPADDRESS_LENGTH;
-	UCHAR			AironetIPAddressBuffer[AIRONET_IPADDRESS_LENGTH] = {0x00, 0x40, 0x96, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00};
-	UCHAR			AironetCCKMReassocIE = IE_AIRONET_CCKMREASSOC;
-	UCHAR			AironetCCKMReassocLen = AIRONET_CCKMREASSOC_LENGTH;
-	UCHAR			AironetCCKMReassocBuffer[AIRONET_CCKMREASSOC_LENGTH];
-	UCHAR			AironetOUI[] = {0x00, 0x40, 0x96, 0x00};
-	UCHAR			MICMN[16];
-	UCHAR			CalcMicBuffer[80];
-	ULONG			CalcMicBufferLen = 0;
-#endif // LEAP_SUPPORT //
-	USHORT			Status;
-
-	// Block all authentication request durning WPA block period
-	if (pAd->StaCfg.bBlockAssoc == TRUE)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - Block ReAssoc request durning WPA block period!\n"));
-		pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-		Status = MLME_STATE_MACHINE_REJECT;
-		MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_REASSOC_CONF, 2, &Status);
-	}
-	// the parameters are the same as the association
-	else if(MlmeAssocReqSanity(pAd, Elem->Msg, Elem->MsgLen, ApAddr, &CapabilityInfo, &Timeout, &ListenIntv))
-	{
-		RTMPCancelTimer(&pAd->MlmeAux.ReassocTimer, &TimerCancelled);
-
-		NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-		if(NStatus != NDIS_STATUS_SUCCESS)
-		{
-			DBGPRINT(RT_DEBUG_TRACE,("ASSOC - MlmeReassocReqAction() allocate memory failed \n"));
-			pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-			Status = MLME_FAIL_NO_RESOURCE;
-			MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_REASSOC_CONF, 2, &Status);
-			return;
-		}
-
-		COPY_MAC_ADDR(pAd->MlmeAux.Bssid, ApAddr);
-
-		// make frame, use bssid as the AP address??
-		DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - Send RE-ASSOC request...\n"));
-		MgtMacHeaderInit(pAd, &ReassocHdr, SUBTYPE_REASSOC_REQ, 0, ApAddr, ApAddr);
-		MakeOutgoingFrame(pOutBuffer,               &FrameLen,
-						  sizeof(HEADER_802_11),    &ReassocHdr,
-						  2,                        &CapabilityInfo,
-						  2,                        &ListenIntv,
-						  MAC_ADDR_LEN,             ApAddr,
-						  1,                        &SsidIe,
-						  1,                        &pAd->MlmeAux.SsidLen,
-						  pAd->MlmeAux.SsidLen,     pAd->MlmeAux.Ssid,
-						  1,                        &SupRateIe,
-						  1,						&pAd->MlmeAux.SupRateLen,
-						  pAd->MlmeAux.SupRateLen,  pAd->MlmeAux.SupRate,
-						  END_OF_ARGS);
-
-		if (pAd->MlmeAux.ExtRateLen != 0)
-		{
-			MakeOutgoingFrame(pOutBuffer + FrameLen,        &tmp,
-							  1,                            &ExtRateIe,
-							  1,                            &pAd->MlmeAux.ExtRateLen,
-							  pAd->MlmeAux.ExtRateLen,	    pAd->MlmeAux.ExtRate,
-							  END_OF_ARGS);
-			FrameLen += tmp;
-		}
-
-		if (pAd->MlmeAux.APEdcaParm.bValid)
-		{
-			if (pAd->CommonCfg.bAPSDCapable && pAd->MlmeAux.APEdcaParm.bAPSDCapable)
-			{
-				QBSS_STA_INFO_PARM QosInfo;
-
-				NdisZeroMemory(&QosInfo, sizeof(QBSS_STA_INFO_PARM));
-				QosInfo.UAPSD_AC_BE = pAd->CommonCfg.bAPSDAC_BE;
-				QosInfo.UAPSD_AC_BK = pAd->CommonCfg.bAPSDAC_BK;
-				QosInfo.UAPSD_AC_VI = pAd->CommonCfg.bAPSDAC_VI;
-				QosInfo.UAPSD_AC_VO = pAd->CommonCfg.bAPSDAC_VO;
-				QosInfo.MaxSPLength = pAd->CommonCfg.MaxSPLength;
-				WmeIe[8] |= *(PUCHAR)&QosInfo;
-			}
-
-			MakeOutgoingFrame(pOutBuffer + FrameLen,    &tmp,
-							  9,                        &WmeIe[0],
-							  END_OF_ARGS);
-			FrameLen += tmp;
-		}
-
-#ifdef DOT11_N_SUPPORT
-		// HT
-		if ((pAd->MlmeAux.HtCapabilityLen > 0) && (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
-		{
-			ULONG TmpLen;
-			UCHAR HtLen;
-			UCHAR BROADCOM[4] = {0x0, 0x90, 0x4c, 0x33};
-			if (pAd->StaActive.SupportedPhyInfo.bPreNHt == TRUE)
-			{
-				HtLen = SIZE_HT_CAP_IE + 4;
-				MakeOutgoingFrame(pOutBuffer + FrameLen,            &TmpLen,
-							  1,                                &WpaIe,
-							  1,                                &HtLen,
-							  4,                                &BROADCOM[0],
-							 pAd->MlmeAux.HtCapabilityLen,          &pAd->MlmeAux.HtCapability,
-							  END_OF_ARGS);
-			}
-			else
-			{
-				MakeOutgoingFrame(pOutBuffer + FrameLen,            &TmpLen,
-							  1,                                &HtCapIe,
-							  1,                                &pAd->MlmeAux.HtCapabilityLen,
-							 pAd->MlmeAux.HtCapabilityLen,          &pAd->MlmeAux.HtCapability,
-							  END_OF_ARGS);
-			}
-			FrameLen += TmpLen;
-		}
-#endif // DOT11_N_SUPPORT //
-
-		// add Ralink proprietary IE to inform AP this STA is going to use AGGREGATION or PIGGY-BACK+AGGREGATION
-		// Case I: (Aggregation + Piggy-Back)
-		// 1. user enable aggregation, AND
-		// 2. Mac support piggy-back
-		// 3. AP annouces it's PIGGY-BACK+AGGREGATION-capable in BEACON
-		// Case II: (Aggregation)
-		// 1. user enable aggregation, AND
-		// 2. AP annouces it's AGGREGATION-capable in BEACON
-		if (pAd->CommonCfg.bAggregationCapable)
-		{
-			if ((pAd->CommonCfg.bPiggyBackCapable) && ((pAd->MlmeAux.APRalinkIe & 0x00000003) == 3))
-			{
-				ULONG TmpLen;
-				UCHAR RalinkIe[9] = {IE_VENDOR_SPECIFIC, 7, 0x00, 0x0c, 0x43, 0x03, 0x00, 0x00, 0x00};
-				MakeOutgoingFrame(pOutBuffer+FrameLen,           &TmpLen,
-								  9,                             RalinkIe,
-								  END_OF_ARGS);
-				FrameLen += TmpLen;
-			}
-			else if (pAd->MlmeAux.APRalinkIe & 0x00000001)
-			{
-				ULONG TmpLen;
-				UCHAR RalinkIe[9] = {IE_VENDOR_SPECIFIC, 7, 0x00, 0x0c, 0x43, 0x01, 0x00, 0x00, 0x00};
-				MakeOutgoingFrame(pOutBuffer+FrameLen,           &TmpLen,
-								  9,                             RalinkIe,
-								  END_OF_ARGS);
-				FrameLen += TmpLen;
-			}
-		}
-		else
-		{
-			ULONG TmpLen;
-			UCHAR RalinkIe[9] = {IE_VENDOR_SPECIFIC, 7, 0x00, 0x0c, 0x43, 0x04, 0x00, 0x00, 0x00};
-			MakeOutgoingFrame(pOutBuffer+FrameLen,		 &TmpLen,
-							  9,						 RalinkIe,
-							  END_OF_ARGS);
-			FrameLen += TmpLen;
-		}
-#ifdef LEAP_SUPPORT
-		if (LEAP_CCKM_ON(pAd) && (pAd->StaCfg.CCKMLinkUpFlag == TRUE))
-		{
-			CkipFlag = pAd->StaCfg.CkipFlag;	// We have update that at PeerBeaconAtJoinRequest()
-			if (CkipFlag != 0)
-			{
-				NdisZeroMemory(CkipNegotiationBuffer, CKIP_NEGOTIATION_LENGTH);
-				CkipNegotiationBuffer[2] = 0x66;
-				// Make it try KP & MIC, since we have to follow the result from AssocRsp
-				CkipNegotiationBuffer[8] = 0x18;
-				CkipNegotiationBuffer[CKIP_NEGOTIATION_LENGTH - 1] = 0x22;
-
-				MakeOutgoingFrame(pOutBuffer + FrameLen,            &tmp,
-									1,                              &AironetCkipIe,
-									1,                              &AironetCkipLen,
-									AironetCkipLen,                 CkipNegotiationBuffer,
-									END_OF_ARGS);
-				FrameLen += tmp;
-			}
-
-			MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp,
-							1,                              &AironetIPAddressIE,
-							1,                              &AironetIPAddressLen,
-							AironetIPAddressLen,            AironetIPAddressBuffer,
-							END_OF_ARGS);
-			FrameLen += tmp;
-
-			//
-			// The RN is incremented before each reassociation request.
-			//
-			pAd->StaCfg.CCKMRN++;
-			//
-			// Calculate MIC = hmac-md5(krk, STA-ID|BSSID|RSNIE|TSF|RN);
-			//
-			COPY_MAC_ADDR(CalcMicBuffer, pAd->CurrentAddress);
-			CalcMicBufferLen = MAC_ADDR_LEN;
-			COPY_MAC_ADDR(CalcMicBuffer + CalcMicBufferLen, pAd->MlmeAux.Bssid);
-			CalcMicBufferLen += MAC_ADDR_LEN;
-			NdisMoveMemory(CalcMicBuffer + CalcMicBufferLen, CipherSuiteCiscoCCKM, CipherSuiteCiscoCCKMLen);
-			CalcMicBufferLen += CipherSuiteCiscoCCKMLen;
-			NdisMoveMemory(CalcMicBuffer + CalcMicBufferLen, (PUCHAR) &pAd->StaCfg.CCKMBeaconAtJoinTimeStamp, sizeof(pAd->StaCfg.CCKMBeaconAtJoinTimeStamp));
-			CalcMicBufferLen += sizeof(pAd->StaCfg.CCKMBeaconAtJoinTimeStamp);
-			NdisMoveMemory(CalcMicBuffer + CalcMicBufferLen, (PUCHAR)&pAd->StaCfg.CCKMRN, sizeof(pAd->StaCfg.CCKMRN));
-			CalcMicBufferLen += sizeof(pAd->StaCfg.CCKMRN);
-			hmac_md5(pAd->StaCfg.KRK, LEN_EAP_MICK, CalcMicBuffer, CalcMicBufferLen, MICMN);
-
-			//
-			// fill up CCKM reassociation request element
-			//
-			NdisMoveMemory(AironetCCKMReassocBuffer, AironetOUI, 4);
-			NdisMoveMemory(AironetCCKMReassocBuffer + 4, (PUCHAR)&pAd->StaCfg.CCKMBeaconAtJoinTimeStamp, 8);
-			NdisMoveMemory(AironetCCKMReassocBuffer + 12, (PUCHAR) &pAd->StaCfg.CCKMRN, 4);
-			NdisMoveMemory(AironetCCKMReassocBuffer +16, MICMN, 8);
-
-			MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp,
-							1,                      &AironetCCKMReassocIE,
-							1,                      &AironetCCKMReassocLen,
-							AironetCCKMReassocLen,  AironetCCKMReassocBuffer,
-							END_OF_ARGS);
-			FrameLen += tmp;
-
-			MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp,
-							CipherSuiteCiscoCCKMLen,CipherSuiteCiscoCCKM,
-							END_OF_ARGS);
-			FrameLen += tmp;
-		}
-#endif // LEAP_SUPPORT //
-
-		// Add CCX v2 request if CCX2 admin state is on
-		if (pAd->StaCfg.CCXControl.field.Enable == 1)
-		{
-			//
-			// Add CCX Version
-			//
-			MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp,
-						1,							&Ccx2Ie,
-						1,							&Ccx2Len,
-						Ccx2Len,				    Ccx2IeInfo,
-						END_OF_ARGS);
-			FrameLen += tmp;
-		}
-
-		MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-		MlmeFreeMemory(pAd, pOutBuffer);
-
-		RTMPSetTimer(&pAd->MlmeAux.ReassocTimer, Timeout); /* in mSec */
-		pAd->Mlme.AssocMachine.CurrState = REASSOC_WAIT_RSP;
-	}
-	else
-	{
-		DBGPRINT(RT_DEBUG_TRACE,("ASSOC - MlmeReassocReqAction() sanity check failed. BUG!!!! \n"));
-		pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-		Status = MLME_INVALID_FORMAT;
-		MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_REASSOC_CONF, 2, &Status);
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-		Upper layer issues disassoc request
-	Parameters:
-		Elem -
-
-	IRQL = PASSIVE_LEVEL
-
-	==========================================================================
- */
-VOID MlmeDisassocReqAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	PMLME_DISASSOC_REQ_STRUCT pDisassocReq;
-	HEADER_802_11         DisassocHdr;
-	PHEADER_802_11        pDisassocHdr;
-	PUCHAR                pOutBuffer = NULL;
-	ULONG                 FrameLen = 0;
-	NDIS_STATUS           NStatus;
-	BOOLEAN               TimerCancelled;
-	ULONG                 Timeout = 0;
-	USHORT                Status;
-
-#ifdef QOS_DLS_SUPPORT
-	// send DLS-TEAR_DOWN message,
-	if (pAd->CommonCfg.bDLSCapable)
-	{
-		UCHAR i;
-
-		// tear down local dls table entry
-		for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-		{
-			if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
-			{
-				RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
-				pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-				pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-			}
-		}
-
-		// tear down peer dls table entry
-		for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
-		{
-			if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
-			{
-				RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
-				pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
-				pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-			}
-		}
-	}
-#endif // QOS_DLS_SUPPORT //
-
-	// skip sanity check
-	pDisassocReq = (PMLME_DISASSOC_REQ_STRUCT)(Elem->Msg);
-
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-	if (NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - MlmeDisassocReqAction() allocate memory failed\n"));
-		pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-		Status = MLME_FAIL_NO_RESOURCE;
-		MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_DISASSOC_CONF, 2, &Status);
-		return;
-	}
-
-
-
-	RTMPCancelTimer(&pAd->MlmeAux.DisassocTimer, &TimerCancelled);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - Send DISASSOC request[BSSID::%02x:%02x:%02x:%02x:%02x:%02x (Reason=%d)\n",
-				pDisassocReq->Addr[0], pDisassocReq->Addr[1], pDisassocReq->Addr[2],
-				pDisassocReq->Addr[3], pDisassocReq->Addr[4], pDisassocReq->Addr[5], pDisassocReq->Reason));
-	MgtMacHeaderInit(pAd, &DisassocHdr, SUBTYPE_DISASSOC, 0, pDisassocReq->Addr, pDisassocReq->Addr);	// patch peap ttls switching issue
-	MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-					  sizeof(HEADER_802_11),&DisassocHdr,
-					  2,                    &pDisassocReq->Reason,
-					  END_OF_ARGS);
-	MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-
-	// To patch Instance and Buffalo(N) AP
-	// Driver has to send deauth to Instance AP, but Buffalo(N) needs to send disassoc to reset Authenticator's state machine
-	// Therefore, we send both of them.
-	pDisassocHdr = (PHEADER_802_11)pOutBuffer;
-	pDisassocHdr->FC.SubType = SUBTYPE_DEAUTH;
-	MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-	pAd->StaCfg.DisassocReason = REASON_DISASSOC_STA_LEAVING;
-	COPY_MAC_ADDR(pAd->StaCfg.DisassocSta, pDisassocReq->Addr);
-
-	RTMPSetTimer(&pAd->MlmeAux.DisassocTimer, Timeout); /* in mSec */
-	pAd->Mlme.AssocMachine.CurrState = DISASSOC_WAIT_RSP;
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-    if (pAd->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
-	{
-        union iwreq_data    wrqu;
-        //send disassociate event to wpa_supplicant
-        memset(&wrqu, 0, sizeof(wrqu));
-        wrqu.data.flags = RT_DISASSOC_EVENT_FLAG;
-        wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL);
-    }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-    {
-        union iwreq_data    wrqu;
-        memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN);
-        wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
-    }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-
-}
-
-/*
-	==========================================================================
-	Description:
-		peer sends assoc rsp back
-	Parameters:
-		Elme - MLME message containing the received frame
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID PeerAssocRspAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT        CapabilityInfo, Status, Aid;
-	UCHAR         SupRate[MAX_LEN_OF_SUPPORTED_RATES], SupRateLen;
-	UCHAR         ExtRate[MAX_LEN_OF_SUPPORTED_RATES], ExtRateLen;
-	UCHAR         Addr2[MAC_ADDR_LEN];
-	BOOLEAN       TimerCancelled;
-	UCHAR         CkipFlag;
-	EDCA_PARM     EdcaParm;
-	HT_CAPABILITY_IE		HtCapability;
-	ADD_HT_INFO_IE		AddHtInfo;	// AP might use this additional ht info IE
-	UCHAR			HtCapabilityLen;
-	UCHAR			AddHtInfoLen;
-	UCHAR			NewExtChannelOffset = 0xff;
-
-	if (PeerAssocRspSanity(pAd, Elem->Msg, Elem->MsgLen, Addr2, &CapabilityInfo, &Status, &Aid, SupRate, &SupRateLen, ExtRate, &ExtRateLen,
-		&HtCapability,&AddHtInfo, &HtCapabilityLen,&AddHtInfoLen,&NewExtChannelOffset, &EdcaParm, &CkipFlag))
-	{
-		// The frame is for me ?
-		if(MAC_ADDR_EQUAL(Addr2, pAd->MlmeAux.Bssid))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("PeerAssocRspAction():ASSOC - receive ASSOC_RSP to me (status=%d)\n", Status));
-#ifdef DOT11_N_SUPPORT
-			DBGPRINT(RT_DEBUG_TRACE, ("PeerAssocRspAction():MacTable [%d].AMsduSize = %d. ClientStatusFlags = 0x%lx \n",Elem->Wcid, pAd->MacTab.Content[BSSID_WCID].AMsduSize, pAd->MacTab.Content[BSSID_WCID].ClientStatusFlags));
-#endif // DOT11_N_SUPPORT //
-			RTMPCancelTimer(&pAd->MlmeAux.AssocTimer, &TimerCancelled);
-			if(Status == MLME_SUCCESS)
-			{
-				UCHAR			MaxSupportedRateIn500Kbps = 0;
-				UCHAR			idx;
-
-				// supported rates array may not be sorted. sort it and find the maximum rate
-			    for (idx=0; idx<SupRateLen; idx++)
-			    {
-			        if (MaxSupportedRateIn500Kbps < (SupRate[idx] & 0x7f))
-			            MaxSupportedRateIn500Kbps = SupRate[idx] & 0x7f;
-			    }
-
-				for (idx=0; idx<ExtRateLen; idx++)
-			    {
-			        if (MaxSupportedRateIn500Kbps < (ExtRate[idx] & 0x7f))
-			            MaxSupportedRateIn500Kbps = ExtRate[idx] & 0x7f;
-			    }
-				// go to procedure listed on page 376
-				AssocPostProc(pAd, Addr2, CapabilityInfo, Aid, SupRate, SupRateLen, ExtRate, ExtRateLen,
-					&EdcaParm, &HtCapability, HtCapabilityLen, &AddHtInfo);
-
-				StaAddMacTableEntry(pAd, &pAd->MacTab.Content[BSSID_WCID], MaxSupportedRateIn500Kbps, &HtCapability, HtCapabilityLen, CapabilityInfo);
-
-				pAd->StaCfg.CkipFlag = CkipFlag;
-				if (CkipFlag & 0x18)
-				{
-					NdisZeroMemory(pAd->StaCfg.TxSEQ, 4);
-					NdisZeroMemory(pAd->StaCfg.RxSEQ, 4);
-					NdisZeroMemory(pAd->StaCfg.CKIPMIC, 4);
-					pAd->StaCfg.GIV[0] = RandomByte(pAd);
-					pAd->StaCfg.GIV[1] = RandomByte(pAd);
-					pAd->StaCfg.GIV[2] = RandomByte(pAd);
-					pAd->StaCfg.bCkipOn = TRUE;
-					DBGPRINT(RT_DEBUG_TRACE, ("<CCX> pAd->StaCfg.CkipFlag = 0x%02x\n", pAd->StaCfg.CkipFlag));
-				}
-			}
-			else
-			{
-				// Faile on Association, we need to check the status code
-				// Is that a Rogue AP?
-#ifdef LEAP_SUPPORT
-				if ((pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP) && (Status == MLME_ALG_NOT_SUPPORT))
-				{ //Possibly Rogue AP
-					RogueApTableSetEntry(pAd, &pAd->StaCfg.RogueApTab, pAd->MlmeAux.Bssid, LEAP_REASON_INVALID_AUTH);
-				}
-#endif // LEAP_SUPPORT //
-			}
-			pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-			MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_ASSOC_CONF, 2, &Status);
-		}
-	}
-	else
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - PeerAssocRspAction() sanity check fail\n"));
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-		peer sends reassoc rsp
-	Parametrs:
-		Elem - MLME message cntaining the received frame
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID PeerReassocRspAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT      CapabilityInfo;
-	USHORT      Status;
-	USHORT      Aid;
-	UCHAR       SupRate[MAX_LEN_OF_SUPPORTED_RATES], SupRateLen;
-	UCHAR       ExtRate[MAX_LEN_OF_SUPPORTED_RATES], ExtRateLen;
-	UCHAR       Addr2[MAC_ADDR_LEN];
-	UCHAR       CkipFlag;
-	BOOLEAN     TimerCancelled;
-	EDCA_PARM   EdcaParm;
-	HT_CAPABILITY_IE		HtCapability;
-	ADD_HT_INFO_IE		AddHtInfo;	// AP might use this additional ht info IE
-	UCHAR			HtCapabilityLen;
-	UCHAR			AddHtInfoLen;
-	UCHAR			NewExtChannelOffset = 0xff;
-
-	if(PeerAssocRspSanity(pAd, Elem->Msg, Elem->MsgLen, Addr2, &CapabilityInfo, &Status, &Aid, SupRate, &SupRateLen, ExtRate, &ExtRateLen,
-								&HtCapability,	&AddHtInfo, &HtCapabilityLen, &AddHtInfoLen,&NewExtChannelOffset, &EdcaParm, &CkipFlag))
-	{
-		if(MAC_ADDR_EQUAL(Addr2, pAd->MlmeAux.Bssid)) // The frame is for me ?
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - receive REASSOC_RSP to me (status=%d)\n", Status));
-			RTMPCancelTimer(&pAd->MlmeAux.ReassocTimer, &TimerCancelled);
-
-			if(Status == MLME_SUCCESS)
-			{
-				// go to procedure listed on page 376
-				AssocPostProc(pAd, Addr2, CapabilityInfo, Aid, SupRate, SupRateLen, ExtRate, ExtRateLen,
-					 &EdcaParm, &HtCapability, HtCapabilityLen, &AddHtInfo);
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-                if (pAd->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
-                {
-                    union iwreq_data    wrqu;
-
-                    SendAssocIEsToWpaSupplicant(pAd);
-                    memset(&wrqu, 0, sizeof(wrqu));
-                    wrqu.data.flags = RT_ASSOC_EVENT_FLAG;
-                    wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL);
-                }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-                {
-                    union iwreq_data    wrqu;
-                    wext_notify_event_assoc(pAd);
-
-                    memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN);
-                    memcpy(wrqu.ap_addr.sa_data, pAd->MlmeAux.Bssid, MAC_ADDR_LEN);
-                    wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
-
-                }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-
-			}
-
-			//
-			// Cisco Leap CCKM supported Re-association.
-			//
-#ifdef LEAP_SUPPORT
-			if (LEAP_CCKM_ON(pAd) && (pAd->StaCfg.CCKMLinkUpFlag == TRUE))
-			{
-				if (CCKMAssocRspSanity(pAd, Elem->Msg, Elem->MsgLen) == TRUE)
-				{
-					pAd->StaCfg.CkipFlag = CkipFlag;
-					if (CkipFlag & 0x18)
-					{
-						NdisZeroMemory(pAd->StaCfg.TxSEQ, 4);
-						NdisZeroMemory(pAd->StaCfg.RxSEQ, 4);
-						NdisZeroMemory(pAd->StaCfg.CKIPMIC, 4);
-						pAd->StaCfg.GIV[0] = RandomByte(pAd);
-						pAd->StaCfg.GIV[1] = RandomByte(pAd);
-						pAd->StaCfg.GIV[2] = RandomByte(pAd);
-						pAd->StaCfg.bCkipOn = TRUE;
-						DBGPRINT(RT_DEBUG_TRACE, ("<CCX> pAd->StaCfg.CkipFlag = 0x%02x\n", pAd->StaCfg.CkipFlag));
-					}
-
-					pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-					MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_REASSOC_CONF, 2, &Status);
-				}
-				else
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - CCKMAssocRspSanity() sanity check fail\n"));
-				}
-			}
-			else
-#endif // LEAP_SUPPORT //
-			{
-				// CkipFlag is no use for reassociate
-				pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-				MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_REASSOC_CONF, 2, &Status);
-			}
-		}
-	}
-	else
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - PeerReassocRspAction() sanity check fail\n"));
-	}
-
-}
-
-/*
-	==========================================================================
-	Description:
-		procedures on IEEE 802.11/1999 p.376
-	Parametrs:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AssocPostProc(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pAddr2,
-	IN USHORT CapabilityInfo,
-	IN USHORT Aid,
-	IN UCHAR SupRate[],
-	IN UCHAR SupRateLen,
-	IN UCHAR ExtRate[],
-	IN UCHAR ExtRateLen,
-	IN PEDCA_PARM pEdcaParm,
-	IN HT_CAPABILITY_IE		*pHtCapability,
-	IN UCHAR HtCapabilityLen,
-	IN ADD_HT_INFO_IE		*pAddHtInfo)	// AP might use this additional ht info IE
-{
-	ULONG Idx;
-
-	pAd->MlmeAux.BssType = BSS_INFRA;
-	COPY_MAC_ADDR(pAd->MlmeAux.Bssid, pAddr2);
-	pAd->MlmeAux.Aid = Aid;
-	pAd->MlmeAux.CapabilityInfo = CapabilityInfo & SUPPORTED_CAPABILITY_INFO;
-#ifdef DOT11_N_SUPPORT
-	// Some HT AP might lost WMM IE. We add WMM ourselves. beacuase HT requires QoS on.
-	if ((HtCapabilityLen > 0) && (pEdcaParm->bValid == FALSE))
-	{
-		pEdcaParm->bValid = TRUE;
-		pEdcaParm->Aifsn[0] = 3;
-		pEdcaParm->Aifsn[1] = 7;
-		pEdcaParm->Aifsn[2] = 2;
-		pEdcaParm->Aifsn[3] = 2;
-
-		pEdcaParm->Cwmin[0] = 4;
-		pEdcaParm->Cwmin[1] = 4;
-		pEdcaParm->Cwmin[2] = 3;
-		pEdcaParm->Cwmin[3] = 2;
-
-		pEdcaParm->Cwmax[0] = 10;
-		pEdcaParm->Cwmax[1] = 10;
-		pEdcaParm->Cwmax[2] = 4;
-		pEdcaParm->Cwmax[3] = 3;
-
-		pEdcaParm->Txop[0]  = 0;
-		pEdcaParm->Txop[1]  = 0;
-		pEdcaParm->Txop[2]  = 96;
-		pEdcaParm->Txop[3]  = 48;
-
-	}
-#endif // DOT11_N_SUPPORT //
-
-	NdisMoveMemory(&pAd->MlmeAux.APEdcaParm, pEdcaParm, sizeof(EDCA_PARM));
-
-	// filter out un-supported rates
-	pAd->MlmeAux.SupRateLen = SupRateLen;
-	NdisMoveMemory(pAd->MlmeAux.SupRate, SupRate, SupRateLen);
-	RTMPCheckRates(pAd, pAd->MlmeAux.SupRate, &pAd->MlmeAux.SupRateLen);
-
-	// filter out un-supported rates
-	pAd->MlmeAux.ExtRateLen = ExtRateLen;
-	NdisMoveMemory(pAd->MlmeAux.ExtRate, ExtRate, ExtRateLen);
-	RTMPCheckRates(pAd, pAd->MlmeAux.ExtRate, &pAd->MlmeAux.ExtRateLen);
-
-#ifdef DOT11_N_SUPPORT
-	if (HtCapabilityLen > 0)
-	{
-		RTMPCheckHt(pAd, BSSID_WCID, pHtCapability, pAddHtInfo);
-	}
-	DBGPRINT(RT_DEBUG_TRACE, ("AssocPostProc===>  AP.AMsduSize = %d. ClientStatusFlags = 0x%lx \n", pAd->MacTab.Content[BSSID_WCID].AMsduSize, pAd->MacTab.Content[BSSID_WCID].ClientStatusFlags));
-
-	DBGPRINT(RT_DEBUG_TRACE, ("AssocPostProc===>    (Mmps=%d, AmsduSize=%d, )\n",
-		pAd->MacTab.Content[BSSID_WCID].MmpsMode, pAd->MacTab.Content[BSSID_WCID].AMsduSize));
-#endif // DOT11_N_SUPPORT //
-
-	// Set New WPA information
-	Idx = BssTableSearch(&pAd->ScanTab, pAddr2, pAd->MlmeAux.Channel);
-	if (Idx == BSS_NOT_FOUND)
-	{
-		DBGPRINT_ERR(("ASSOC - Can't find BSS after receiving Assoc response\n"));
-	}
-	else
-	{
-		// Init variable
-		pAd->MacTab.Content[BSSID_WCID].RSNIE_Len = 0;
-		NdisZeroMemory(pAd->MacTab.Content[BSSID_WCID].RSN_IE, MAX_LEN_OF_RSNIE);
-
-		// Store appropriate RSN_IE for WPA SM negotiation later
-		if ((pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA) && (pAd->ScanTab.BssEntry[Idx].VarIELen != 0))
-		{
-			PUCHAR              pVIE;
-			USHORT              len;
-			PEID_STRUCT         pEid;
-
-			pVIE = pAd->ScanTab.BssEntry[Idx].VarIEs;
-			len	 = pAd->ScanTab.BssEntry[Idx].VarIELen;
-
-			while (len > 0)
-			{
-				pEid = (PEID_STRUCT) pVIE;
-				// For WPA/WPAPSK
-				if ((pEid->Eid == IE_WPA) && (NdisEqualMemory(pEid->Octet, WPA_OUI, 4))
-					&& (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA || pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK))
-				{
-					NdisMoveMemory(pAd->MacTab.Content[BSSID_WCID].RSN_IE, pVIE, (pEid->Len + 2));
-					pAd->MacTab.Content[BSSID_WCID].RSNIE_Len = (pEid->Len + 2);
-					DBGPRINT(RT_DEBUG_TRACE, ("AssocPostProc===> Store RSN_IE for WPA SM negotiation \n"));
-				}
-				// For WPA2/WPA2PSK
-				else if ((pEid->Eid == IE_RSN) && (NdisEqualMemory(pEid->Octet + 2, RSN_OUI, 3))
-					&& (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2 || pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK))
-				{
-					NdisMoveMemory(pAd->MacTab.Content[BSSID_WCID].RSN_IE, pVIE, (pEid->Len + 2));
-					pAd->MacTab.Content[BSSID_WCID].RSNIE_Len = (pEid->Len + 2);
-					DBGPRINT(RT_DEBUG_TRACE, ("AssocPostProc===> Store RSN_IE for WPA2 SM negotiation \n"));
-				}
-
-				pVIE += (pEid->Len + 2);
-				len  -= (pEid->Len + 2);
-			}
-		}
-
-		if (pAd->MacTab.Content[BSSID_WCID].RSNIE_Len == 0)
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("AssocPostProc===> no RSN_IE \n"));
-		}
-		else
-		{
-			hex_dump("RSN_IE", pAd->MacTab.Content[BSSID_WCID].RSN_IE, pAd->MacTab.Content[BSSID_WCID].RSNIE_Len);
-		}
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-		left part of IEEE 802.11/1999 p.374
-	Parameters:
-		Elem - MLME message containing the received frame
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID PeerDisassocAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR         Addr2[MAC_ADDR_LEN];
-	USHORT        Reason;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - PeerDisassocAction()\n"));
-	if(PeerDisassocSanity(pAd, Elem->Msg, Elem->MsgLen, Addr2, &Reason))
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - PeerDisassocAction() Reason = %d\n", Reason));
-		if (INFRA_ON(pAd) && MAC_ADDR_EQUAL(pAd->CommonCfg.Bssid, Addr2))
-		{
-
-			if (pAd->CommonCfg.bWirelessEvent)
-			{
-				RTMPSendWirelessEvent(pAd, IW_DISASSOC_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-			}
-
-
-#ifdef LEAP_SUPPORT
-			if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-			{
-				// Cisco_LEAP has start a timer
-				// We should cancel it if using LEAP
-				RTMPCancelTimer(&pAd->StaCfg.LeapAuthTimer, &TimerCancelled);
-				//Check is it mach the LEAP Authentication failed as possible a Rogue AP
-				//on it's PortSecured not equal to WPA_802_1X_PORT_SECURED while process the Association.
-				if ((pAd->Mlme.LeapMachine.CurrState != LEAP_IDLE) && (pAd->StaCfg.PortSecured != WPA_802_1X_PORT_SECURED))
-				{
-					RogueApTableSetEntry(pAd, &pAd->StaCfg.RogueApTab, Addr2, LEAP_REASON_AUTH_TIMEOUT);
-				}
-			}
-#endif	// LEAP_SUPPORT //
-			//
-			// Get Current System time and Turn on AdjacentAPReport
-			//
-			NdisGetSystemUpTime(&pAd->StaCfg.CCXAdjacentAPLinkDownTime);
-			pAd->StaCfg.CCXAdjacentAPReportFlag = TRUE;
-			LinkDown(pAd, TRUE);
-			pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-            if (pAd->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
-			{
-                union iwreq_data    wrqu;
-                //send disassociate event to wpa_supplicant
-                memset(&wrqu, 0, sizeof(wrqu));
-                wrqu.data.flags = RT_DISASSOC_EVENT_FLAG;
-                wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL);
-            }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-            {
-                union iwreq_data    wrqu;
-                memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN);
-                wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
-            }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-		}
-	}
-	else
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - PeerDisassocAction() sanity check fail\n"));
-	}
-
-}
-
-/*
-	==========================================================================
-	Description:
-		what the state machine will do after assoc timeout
-	Parameters:
-		Elme -
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AssocTimeoutAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT  Status;
-	DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - AssocTimeoutAction\n"));
-	pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-	Status = MLME_REJ_TIMEOUT;
-	MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_ASSOC_CONF, 2, &Status);
-}
-
-/*
-	==========================================================================
-	Description:
-		what the state machine will do after reassoc timeout
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID ReassocTimeoutAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT  Status;
-	DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - ReassocTimeoutAction\n"));
-	pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-	Status = MLME_REJ_TIMEOUT;
-	MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_REASSOC_CONF, 2, &Status);
-}
-
-/*
-	==========================================================================
-	Description:
-		what the state machine will do after disassoc timeout
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID DisassocTimeoutAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT  Status;
-	DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - DisassocTimeoutAction\n"));
-	pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-	Status = MLME_SUCCESS;
-	MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_DISASSOC_CONF, 2, &Status);
-}
-
-VOID InvalidStateWhenAssoc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT  Status;
-	DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - InvalidStateWhenAssoc(state=%ld), reset ASSOC state machine\n",
-		pAd->Mlme.AssocMachine.CurrState));
-	pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-	Status = MLME_STATE_MACHINE_REJECT;
-	MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_ASSOC_CONF, 2, &Status);
-}
-
-VOID InvalidStateWhenReassoc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT Status;
-	DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - InvalidStateWhenReassoc(state=%ld), reset ASSOC state machine\n",
-		pAd->Mlme.AssocMachine.CurrState));
-	pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-	Status = MLME_STATE_MACHINE_REJECT;
-	MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_REASSOC_CONF, 2, &Status);
-}
-
-VOID InvalidStateWhenDisassociate(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT Status;
-	DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - InvalidStateWhenDisassoc(state=%ld), reset ASSOC state machine\n",
-		pAd->Mlme.AssocMachine.CurrState));
-	pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-	Status = MLME_STATE_MACHINE_REJECT;
-	MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_DISASSOC_CONF, 2, &Status);
-}
-
-/*
-	==========================================================================
-	Description:
-		right part of IEEE 802.11/1999 page 374
-	Note:
-		This event should never cause ASSOC state machine perform state
-		transition, and has no relationship with CNTL machine. So we separate
-		this routine as a service outside of ASSOC state transition table.
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID Cls3errAction(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR        pAddr)
-{
-	HEADER_802_11         DisassocHdr;
-	PHEADER_802_11        pDisassocHdr;
-	PUCHAR                pOutBuffer = NULL;
-	ULONG                 FrameLen = 0;
-	NDIS_STATUS           NStatus;
-	USHORT                Reason = REASON_CLS3ERR;
-
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-	if (NStatus != NDIS_STATUS_SUCCESS)
-		return;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - Class 3 Error, Send DISASSOC frame\n"));
-	MgtMacHeaderInit(pAd, &DisassocHdr, SUBTYPE_DISASSOC, 0, pAddr, pAd->CommonCfg.Bssid);	// patch peap ttls switching issue
-	MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-					  sizeof(HEADER_802_11),&DisassocHdr,
-					  2,                    &Reason,
-					  END_OF_ARGS);
-	MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-
-	// To patch Instance and Buffalo(N) AP
-	// Driver has to send deauth to Instance AP, but Buffalo(N) needs to send disassoc to reset Authenticator's state machine
-	// Therefore, we send both of them.
-	pDisassocHdr = (PHEADER_802_11)pOutBuffer;
-	pDisassocHdr->FC.SubType = SUBTYPE_DEAUTH;
-	MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-	pAd->StaCfg.DisassocReason = REASON_CLS3ERR;
-	COPY_MAC_ADDR(pAd->StaCfg.DisassocSta, pAddr);
-}
-
- /*
-	 ==========================================================================
-	 Description:
-		 Switch between WEP and CKIP upon new association up.
-	 Parameters:
-
-	 IRQL = DISPATCH_LEVEL
-
-	 ==========================================================================
-  */
-VOID SwitchBetweenWepAndCkip(
-	IN PRTMP_ADAPTER pAd)
-{
-	int            i;
-	SHAREDKEY_MODE_STRUC  csr1;
-
-	// if KP is required. change the CipherAlg in hardware shard key table from WEP
-	// to CKIP. else remain as WEP
-	if (pAd->StaCfg.bCkipOn && (pAd->StaCfg.CkipFlag & 0x10))
-	{
-		// modify hardware key table so that MAC use correct algorithm to decrypt RX
-		RTMP_IO_READ32(pAd, SHARED_KEY_MODE_BASE, &csr1.word);
-		if (csr1.field.Bss0Key0CipherAlg == CIPHER_WEP64)
-			csr1.field.Bss0Key0CipherAlg = CIPHER_CKIP64;
-		else if (csr1.field.Bss0Key0CipherAlg == CIPHER_WEP128)
-			csr1.field.Bss0Key0CipherAlg = CIPHER_CKIP128;
-
-		if (csr1.field.Bss0Key1CipherAlg == CIPHER_WEP64)
-			csr1.field.Bss0Key1CipherAlg = CIPHER_CKIP64;
-		else if (csr1.field.Bss0Key1CipherAlg == CIPHER_WEP128)
-			csr1.field.Bss0Key1CipherAlg = CIPHER_CKIP128;
-
-		if (csr1.field.Bss0Key2CipherAlg == CIPHER_WEP64)
-			csr1.field.Bss0Key2CipherAlg = CIPHER_CKIP64;
-		else if (csr1.field.Bss0Key2CipherAlg == CIPHER_WEP128)
-			csr1.field.Bss0Key2CipherAlg = CIPHER_CKIP128;
-
-		if (csr1.field.Bss0Key3CipherAlg == CIPHER_WEP64)
-			csr1.field.Bss0Key3CipherAlg = CIPHER_CKIP64;
-		else if (csr1.field.Bss0Key3CipherAlg == CIPHER_WEP128)
-			csr1.field.Bss0Key3CipherAlg = CIPHER_CKIP128;
-		RTMP_IO_WRITE32(pAd, SHARED_KEY_MODE_BASE, csr1.word);
-		DBGPRINT(RT_DEBUG_TRACE, ("SwitchBetweenWepAndCkip: modify BSS0 cipher to %s\n", CipherName[csr1.field.Bss0Key0CipherAlg]));
-
-		// modify software key table so that driver can specify correct algorithm in TXD upon TX
-		for (i=0; i<SHARE_KEY_NUM; i++)
-		{
-			if (pAd->SharedKey[BSS0][i].CipherAlg == CIPHER_WEP64)
-				pAd->SharedKey[BSS0][i].CipherAlg = CIPHER_CKIP64;
-			else if (pAd->SharedKey[BSS0][i].CipherAlg == CIPHER_WEP128)
-				pAd->SharedKey[BSS0][i].CipherAlg = CIPHER_CKIP128;
-		}
-	}
-
-	// else if KP NOT inused. change the CipherAlg in hardware shard key table from CKIP
-	// to WEP.
-	else
-	{
-		// modify hardware key table so that MAC use correct algorithm to decrypt RX
-		RTMP_IO_READ32(pAd, SHARED_KEY_MODE_BASE, &csr1.word);
-		if (csr1.field.Bss0Key0CipherAlg == CIPHER_CKIP64)
-			csr1.field.Bss0Key0CipherAlg = CIPHER_WEP64;
-		else if (csr1.field.Bss0Key0CipherAlg == CIPHER_CKIP128)
-			csr1.field.Bss0Key0CipherAlg = CIPHER_WEP128;
-
-		if (csr1.field.Bss0Key1CipherAlg == CIPHER_CKIP64)
-			csr1.field.Bss0Key1CipherAlg = CIPHER_WEP64;
-		else if (csr1.field.Bss0Key1CipherAlg == CIPHER_CKIP128)
-			csr1.field.Bss0Key1CipherAlg = CIPHER_WEP128;
-
-		if (csr1.field.Bss0Key2CipherAlg == CIPHER_CKIP64)
-			csr1.field.Bss0Key2CipherAlg = CIPHER_WEP64;
-		else if (csr1.field.Bss0Key2CipherAlg == CIPHER_CKIP128)
-			csr1.field.Bss0Key2CipherAlg = CIPHER_WEP128;
-
-		if (csr1.field.Bss0Key3CipherAlg == CIPHER_CKIP64)
-			csr1.field.Bss0Key3CipherAlg = CIPHER_WEP64;
-		else if (csr1.field.Bss0Key3CipherAlg == CIPHER_CKIP128)
-			csr1.field.Bss0Key3CipherAlg = CIPHER_WEP128;
-
-		// modify software key table so that driver can specify correct algorithm in TXD upon TX
-		for (i=0; i<SHARE_KEY_NUM; i++)
-		{
-			if (pAd->SharedKey[BSS0][i].CipherAlg == CIPHER_CKIP64)
-				pAd->SharedKey[BSS0][i].CipherAlg = CIPHER_WEP64;
-			else if (pAd->SharedKey[BSS0][i].CipherAlg == CIPHER_CKIP128)
-				pAd->SharedKey[BSS0][i].CipherAlg = CIPHER_WEP128;
-		}
-
-		//
-		// On WPA-NONE, must update CipherAlg.
-		// Because the OID_802_11_WEP_STATUS was been set after OID_802_11_ADD_KEY
-		// and CipherAlg will be CIPHER_NONE by Windows ZeroConfig.
-		// So we need to update CipherAlg after connect.
-		//
-		if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
-		{
-			for (i = 0; i < SHARE_KEY_NUM; i++)
-			{
-				if (pAd->SharedKey[BSS0][i].KeyLen != 0)
-				{
-					if (pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled)
-					{
-						pAd->SharedKey[BSS0][i].CipherAlg = CIPHER_TKIP;
-					}
-					else if (pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled)
-					{
-						pAd->SharedKey[BSS0][i].CipherAlg = CIPHER_AES;
-					}
-				}
-				else
-				{
-					pAd->SharedKey[BSS0][i].CipherAlg = CIPHER_NONE;
-				}
-			}
-
-			csr1.field.Bss0Key0CipherAlg = pAd->SharedKey[BSS0][0].CipherAlg;
-			csr1.field.Bss0Key1CipherAlg = pAd->SharedKey[BSS0][1].CipherAlg;
-			csr1.field.Bss0Key2CipherAlg = pAd->SharedKey[BSS0][2].CipherAlg;
-			csr1.field.Bss0Key3CipherAlg = pAd->SharedKey[BSS0][3].CipherAlg;
-		}
-		RTMP_IO_WRITE32(pAd, SHARED_KEY_MODE_BASE, csr1.word);
-		DBGPRINT(RT_DEBUG_TRACE, ("SwitchBetweenWepAndCkip: modify BSS0 cipher to %s\n", CipherName[csr1.field.Bss0Key0CipherAlg]));
-	}
-}
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-VOID    SendAssocIEsToWpaSupplicant(
-    IN  PRTMP_ADAPTER pAd)
-{
-    union iwreq_data    wrqu;
-    unsigned char custom[IW_CUSTOM_MAX] = {0};
-
-    if ((pAd->StaCfg.ReqVarIELen + 17) <= IW_CUSTOM_MAX)
-    {
-        sprintf(custom, "ASSOCINFO_ReqIEs=");
-	    NdisMoveMemory(custom+17, pAd->StaCfg.ReqVarIEs, pAd->StaCfg.ReqVarIELen);
-	    memset(&wrqu, 0, sizeof(wrqu));
-        wrqu.data.length = pAd->StaCfg.ReqVarIELen + 17;
-        wrqu.data.flags = RT_REQIE_EVENT_FLAG;
-        wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, custom);
-
-        memset(&wrqu, 0, sizeof(wrqu));
-        wrqu.data.flags = RT_ASSOCINFO_EVENT_FLAG;
-        wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL);
-    }
-    else
-        DBGPRINT(RT_DEBUG_TRACE, ("pAd->StaCfg.ReqVarIELen + 17 > MAX_CUSTOM_LEN\n"));
-
-    return;
-}
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-int wext_notify_event_assoc(
-	IN  RTMP_ADAPTER *pAd)
-{
-    union iwreq_data    wrqu;
-    char custom[IW_CUSTOM_MAX] = {0};
-
-#if WIRELESS_EXT > 17
-    if (pAd->StaCfg.ReqVarIELen <= IW_CUSTOM_MAX)
-    {
-        wrqu.data.length = pAd->StaCfg.ReqVarIELen;
-        memcpy(custom, pAd->StaCfg.ReqVarIEs, pAd->StaCfg.ReqVarIELen);
-        wireless_send_event(pAd->net_dev, IWEVASSOCREQIE, &wrqu, custom);
-    }
-    else
-        DBGPRINT(RT_DEBUG_TRACE, ("pAd->StaCfg.ReqVarIELen > MAX_CUSTOM_LEN\n"));
-#else
-    if (((pAd->StaCfg.ReqVarIELen*2) + 17) <= IW_CUSTOM_MAX)
-    {
-        UCHAR   idx;
-        wrqu.data.length = (pAd->StaCfg.ReqVarIELen*2) + 17;
-        sprintf(custom, "ASSOCINFO(ReqIEs=");
-        for (idx=0; idx<pAd->StaCfg.ReqVarIELen; idx++)
-                sprintf(custom, "%s%02x", custom, pAd->StaCfg.ReqVarIEs[idx]);
-        wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, custom);
-    }
-    else
-        DBGPRINT(RT_DEBUG_TRACE, ("(pAd->StaCfg.ReqVarIELen*2) + 17 > MAX_CUSTOM_LEN\n"));
-#endif
-
-	return 0;
-
-}
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-
-
-BOOLEAN StaAddMacTableEntry(
-	IN  PRTMP_ADAPTER		pAd,
-	IN  PMAC_TABLE_ENTRY	pEntry,
-	IN  UCHAR				MaxSupportedRateIn500Kbps,
-	IN  HT_CAPABILITY_IE	*pHtCapability,
-	IN  UCHAR				HtCapabilityLen,
-	IN  USHORT        		CapabilityInfo)
-{
-	UCHAR            MaxSupportedRate = RATE_11;
-
-	if (ADHOC_ON(pAd))
-		CLIENT_STATUS_CLEAR_FLAG(pEntry, fCLIENT_STATUS_WMM_CAPABLE);
-
-	switch (MaxSupportedRateIn500Kbps)
-    {
-        case 108: MaxSupportedRate = RATE_54;   break;
-        case 96:  MaxSupportedRate = RATE_48;   break;
-        case 72:  MaxSupportedRate = RATE_36;   break;
-        case 48:  MaxSupportedRate = RATE_24;   break;
-        case 36:  MaxSupportedRate = RATE_18;   break;
-        case 24:  MaxSupportedRate = RATE_12;   break;
-        case 18:  MaxSupportedRate = RATE_9;    break;
-        case 12:  MaxSupportedRate = RATE_6;    break;
-        case 22:  MaxSupportedRate = RATE_11;   break;
-        case 11:  MaxSupportedRate = RATE_5_5;  break;
-        case 4:   MaxSupportedRate = RATE_2;    break;
-        case 2:   MaxSupportedRate = RATE_1;    break;
-        default:  MaxSupportedRate = RATE_11;   break;
-    }
-
-    if ((pAd->CommonCfg.PhyMode == PHY_11G) && (MaxSupportedRate < RATE_FIRST_OFDM_RATE))
-        return FALSE;
-
-#ifdef DOT11_N_SUPPORT
-	// 11n only
-	if (((pAd->CommonCfg.PhyMode == PHY_11N_2_4G) || (pAd->CommonCfg.PhyMode == PHY_11N_5G))&& (HtCapabilityLen == 0))
-		return FALSE;
-#endif // DOT11_N_SUPPORT //
-
-	if (!pEntry)
-        return FALSE;
-
-	NdisAcquireSpinLock(&pAd->MacTabLock);
-	if (pEntry)
-	{
-		pEntry->PortSecured = WPA_802_1X_PORT_SECURED;
-		if ((MaxSupportedRate < RATE_FIRST_OFDM_RATE) ||
-			(pAd->CommonCfg.PhyMode == PHY_11B))
-		{
-			pEntry->RateLen = 4;
-			if (MaxSupportedRate >= RATE_FIRST_OFDM_RATE)
-				MaxSupportedRate = RATE_11;
-		}
-		else
-			pEntry->RateLen = 12;
-
-		pEntry->MaxHTPhyMode.word = 0;
-		pEntry->MinHTPhyMode.word = 0;
-		pEntry->HTPhyMode.word = 0;
-		pEntry->MaxSupportedRate = MaxSupportedRate;
-		if (pEntry->MaxSupportedRate < RATE_FIRST_OFDM_RATE)
-		{
-			pEntry->MaxHTPhyMode.field.MODE = MODE_CCK;
-			pEntry->MaxHTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-			pEntry->MinHTPhyMode.field.MODE = MODE_CCK;
-			pEntry->MinHTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-			pEntry->HTPhyMode.field.MODE = MODE_CCK;
-			pEntry->HTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-		}
-		else
-		{
-			pEntry->MaxHTPhyMode.field.MODE = MODE_OFDM;
-			pEntry->MaxHTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-			pEntry->MinHTPhyMode.field.MODE = MODE_OFDM;
-			pEntry->MinHTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-			pEntry->HTPhyMode.field.MODE = MODE_OFDM;
-			pEntry->HTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-		}
-		pEntry->CapabilityInfo = CapabilityInfo;
-		CLIENT_STATUS_CLEAR_FLAG(pEntry, fCLIENT_STATUS_AGGREGATION_CAPABLE);
-		CLIENT_STATUS_CLEAR_FLAG(pEntry, fCLIENT_STATUS_PIGGYBACK_CAPABLE);
-	}
-
-#ifdef DOT11_N_SUPPORT
-	// If this Entry supports 802.11n, upgrade to HT rate.
-	if ((HtCapabilityLen != 0) && (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
-	{
-		UCHAR	j, bitmask; //k,bitmask;
-		CHAR    i;
-
-		if (ADHOC_ON(pAd))
-			CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_WMM_CAPABLE);
-		if ((pHtCapability->HtCapInfo.GF) && (pAd->CommonCfg.DesiredHtPhy.GF))
-		{
-			pEntry->MaxHTPhyMode.field.MODE = MODE_HTGREENFIELD;
-		}
-		else
-		{
-			pEntry->MaxHTPhyMode.field.MODE = MODE_HTMIX;
-			pAd->MacTab.fAnyStationNonGF = TRUE;
-			pAd->CommonCfg.AddHTInfo.AddHtInfo2.NonGfPresent = 1;
-		}
-
-		if ((pHtCapability->HtCapInfo.ChannelWidth) && (pAd->CommonCfg.DesiredHtPhy.ChannelWidth))
-		{
-			pEntry->MaxHTPhyMode.field.BW= BW_40;
-			pEntry->MaxHTPhyMode.field.ShortGI = ((pAd->CommonCfg.DesiredHtPhy.ShortGIfor40)&(pHtCapability->HtCapInfo.ShortGIfor40));
-		}
-		else
-		{
-			pEntry->MaxHTPhyMode.field.BW = BW_20;
-			pEntry->MaxHTPhyMode.field.ShortGI = ((pAd->CommonCfg.DesiredHtPhy.ShortGIfor20)&(pHtCapability->HtCapInfo.ShortGIfor20));
-			pAd->MacTab.fAnyStation20Only = TRUE;
-		}
-
-		// 3*3
-		if (pAd->MACVersion >= RALINK_2883_VERSION && pAd->MACVersion < RALINK_3070_VERSION)
-			pEntry->MaxHTPhyMode.field.TxBF = pAd->CommonCfg.RegTransmitSetting.field.TxBF;
-
-		// find max fixed rate
-		for (i=23; i>=0; i--) // 3*3
-		{
-			j = i/8;
-			bitmask = (1<<(i-(j*8)));
-			if ((pAd->StaCfg.DesiredHtPhyInfo.MCSSet[j] & bitmask) && (pHtCapability->MCSSet[j] & bitmask))
-			{
-				pEntry->MaxHTPhyMode.field.MCS = i;
-				break;
-			}
-			if (i==0)
-				break;
-		}
-
-
-		if (pAd->StaCfg.DesiredTransmitSetting.field.MCS != MCS_AUTO)
-		{
-			if (pAd->StaCfg.DesiredTransmitSetting.field.MCS == 32)
-			{
-				// Fix MCS as HT Duplicated Mode
-				pEntry->MaxHTPhyMode.field.BW = 1;
-				pEntry->MaxHTPhyMode.field.MODE = MODE_HTMIX;
-				pEntry->MaxHTPhyMode.field.STBC = 0;
-				pEntry->MaxHTPhyMode.field.ShortGI = 0;
-				pEntry->MaxHTPhyMode.field.MCS = 32;
-			}
-			else if (pEntry->MaxHTPhyMode.field.MCS > pAd->StaCfg.HTPhyMode.field.MCS)
-			{
-				// STA supports fixed MCS
-				pEntry->MaxHTPhyMode.field.MCS = pAd->StaCfg.HTPhyMode.field.MCS;
-			}
-		}
-
-		pEntry->MaxHTPhyMode.field.STBC = (pHtCapability->HtCapInfo.RxSTBC & (pAd->CommonCfg.DesiredHtPhy.TxSTBC));
-		pEntry->MpduDensity = pHtCapability->HtCapParm.MpduDensity;
-		pEntry->MaxRAmpduFactor = pHtCapability->HtCapParm.MaxRAmpduFactor;
-		pEntry->MmpsMode = (UCHAR)pHtCapability->HtCapInfo.MimoPs;
-		pEntry->AMsduSize = (UCHAR)pHtCapability->HtCapInfo.AMsduSize;
-		pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word;
-
-		if (pAd->CommonCfg.DesiredHtPhy.AmsduEnable && (pAd->CommonCfg.REGBACapability.field.AutoBA == FALSE))
-			CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_AMSDU_INUSED);
-		if (pHtCapability->HtCapInfo.ShortGIfor20)
-			CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI20_CAPABLE);
-		if (pHtCapability->HtCapInfo.ShortGIfor40)
-			CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI40_CAPABLE);
-		if (pHtCapability->HtCapInfo.TxSTBC)
-			CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_TxSTBC_CAPABLE);
-		if (pHtCapability->HtCapInfo.RxSTBC)
-			CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RxSTBC_CAPABLE);
-		if (pHtCapability->ExtHtCapInfo.PlusHTC)
-			CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_HTC_CAPABLE);
-		if (pAd->CommonCfg.bRdg && pHtCapability->ExtHtCapInfo.RDGSupport)
-			CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RDG_CAPABLE);
-		if (pHtCapability->ExtHtCapInfo.MCSFeedback == 0x03)
-			CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_MCSFEEDBACK_CAPABLE);
-	}
-	else
-	{
-		pAd->MacTab.fAnyStationIsLegacy = TRUE;
-	}
-
-	NdisMoveMemory(&pEntry->HTCapability, pHtCapability, sizeof(HT_CAPABILITY_IE));
-#endif // DOT11_N_SUPPORT //
-
-	pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word;
-	pEntry->CurrTxRate = pEntry->MaxSupportedRate;
-
-	// Set asic auto fall back
-	if (pAd->StaCfg.bAutoTxRateSwitch == TRUE)
-	{
-		PUCHAR					pTable;
-		UCHAR					TableSize = 0;
-
-		MlmeSelectTxRateTable(pAd, pEntry, &pTable, &TableSize, &pEntry->CurrTxRateIndex);
-		pEntry->bAutoTxRateSwitch = TRUE;
-	}
-	else
-	{
-		pEntry->HTPhyMode.field.MODE	= pAd->StaCfg.HTPhyMode.field.MODE;
-		pEntry->HTPhyMode.field.MCS	= pAd->StaCfg.HTPhyMode.field.MCS;
-		pEntry->bAutoTxRateSwitch = FALSE;
-
-		// If the legacy mode is set, overwrite the transmit setting of this entry.
-		RTMPUpdateLegacyTxSetting((UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode, pEntry);
-	}
-
-	pEntry->PortSecured = WPA_802_1X_PORT_SECURED;
-	pEntry->Sst = SST_ASSOC;
-	pEntry->AuthState = AS_AUTH_OPEN;
-	pEntry->AuthMode = pAd->StaCfg.AuthMode;
-	pEntry->WepStatus = pAd->StaCfg.WepStatus;
-
-	NdisReleaseSpinLock(&pAd->MacTabLock);
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-    if (pAd->StaCfg.WpaSupplicantUP)
-    {
-        union iwreq_data    wrqu;
-
-        SendAssocIEsToWpaSupplicant(pAd);
-        memset(&wrqu, 0, sizeof(wrqu));
-        wrqu.data.flags = RT_ASSOC_EVENT_FLAG;
-        wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL);
-    }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-    {
-        union iwreq_data    wrqu;
-        wext_notify_event_assoc(pAd);
-
-        memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN);
-        memcpy(wrqu.ap_addr.sa_data, pAd->MlmeAux.Bssid, MAC_ADDR_LEN);
-        wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
-
-    }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-	return TRUE;
-}
-
-
+#include "../../rt2860/sta/assoc.c"
diff --git a/drivers/staging/rt2870/sta/auth.c b/drivers/staging/rt2870/sta/auth.c
index 73fb8d6ea76..57632f9ec78 100644
--- a/drivers/staging/rt2870/sta/auth.c
+++ b/drivers/staging/rt2870/sta/auth.c
@@ -1,474 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	auth.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	John		2004-9-3		porting from RT2500
-*/
-#include "../rt_config.h"
-
-/*
-    ==========================================================================
-    Description:
-        authenticate state machine init, including state transition and timer init
-    Parameters:
-        Sm - pointer to the auth state machine
-    Note:
-        The state machine looks like this
-
-                        AUTH_REQ_IDLE           AUTH_WAIT_SEQ2                   AUTH_WAIT_SEQ4
-    MT2_MLME_AUTH_REQ   mlme_auth_req_action    invalid_state_when_auth          invalid_state_when_auth
-    MT2_PEER_AUTH_EVEN  drop                    peer_auth_even_at_seq2_action    peer_auth_even_at_seq4_action
-    MT2_AUTH_TIMEOUT    Drop                    auth_timeout_action              auth_timeout_action
-
-	IRQL = PASSIVE_LEVEL
-
-    ==========================================================================
- */
-
-void AuthStateMachineInit(
-    IN PRTMP_ADAPTER pAd,
-    IN STATE_MACHINE *Sm,
-    OUT STATE_MACHINE_FUNC Trans[])
-{
-    StateMachineInit(Sm, Trans, MAX_AUTH_STATE, MAX_AUTH_MSG, (STATE_MACHINE_FUNC)Drop, AUTH_REQ_IDLE, AUTH_MACHINE_BASE);
-
-    // the first column
-    StateMachineSetAction(Sm, AUTH_REQ_IDLE, MT2_MLME_AUTH_REQ, (STATE_MACHINE_FUNC)MlmeAuthReqAction);
-
-    // the second column
-    StateMachineSetAction(Sm, AUTH_WAIT_SEQ2, MT2_MLME_AUTH_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenAuth);
-    StateMachineSetAction(Sm, AUTH_WAIT_SEQ2, MT2_PEER_AUTH_EVEN, (STATE_MACHINE_FUNC)PeerAuthRspAtSeq2Action);
-    StateMachineSetAction(Sm, AUTH_WAIT_SEQ2, MT2_AUTH_TIMEOUT, (STATE_MACHINE_FUNC)AuthTimeoutAction);
-
-    // the third column
-    StateMachineSetAction(Sm, AUTH_WAIT_SEQ4, MT2_MLME_AUTH_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenAuth);
-    StateMachineSetAction(Sm, AUTH_WAIT_SEQ4, MT2_PEER_AUTH_EVEN, (STATE_MACHINE_FUNC)PeerAuthRspAtSeq4Action);
-    StateMachineSetAction(Sm, AUTH_WAIT_SEQ4, MT2_AUTH_TIMEOUT, (STATE_MACHINE_FUNC)AuthTimeoutAction);
-
-	RTMPInitTimer(pAd, &pAd->MlmeAux.AuthTimer, GET_TIMER_FUNCTION(AuthTimeout), pAd, FALSE);
-}
-
-/*
-    ==========================================================================
-    Description:
-        function to be executed at timer thread when auth timer expires
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID AuthTimeout(
-    IN PVOID SystemSpecific1,
-    IN PVOID FunctionContext,
-    IN PVOID SystemSpecific2,
-    IN PVOID SystemSpecific3)
-{
-    RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;
-
-    DBGPRINT(RT_DEBUG_TRACE,("AUTH - AuthTimeout\n"));
-
-	// Do nothing if the driver is starting halt state.
-	// This might happen when timer already been fired before cancel timer with mlmehalt
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
-		return;
-
-	// send a de-auth to reset AP's state machine (Patch AP-Dir635)
-	if (pAd->Mlme.AuthMachine.CurrState == AUTH_WAIT_SEQ2)
-		Cls2errAction(pAd, pAd->MlmeAux.Bssid);
-
-
-    MlmeEnqueue(pAd, AUTH_STATE_MACHINE, MT2_AUTH_TIMEOUT, 0, NULL);
-    RT28XX_MLME_HANDLER(pAd);
-}
-
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID MlmeAuthReqAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-    UCHAR              Addr[6];
-    USHORT             Alg, Seq, Status;
-    ULONG              Timeout;
-    HEADER_802_11      AuthHdr;
-    BOOLEAN            TimerCancelled;
-    NDIS_STATUS        NStatus;
-    PUCHAR             pOutBuffer = NULL;
-    ULONG              FrameLen = 0;
-
-	// Block all authentication request durning WPA block period
-	if (pAd->StaCfg.bBlockAssoc == TRUE)
-	{
-        DBGPRINT(RT_DEBUG_TRACE, ("AUTH - Block Auth request durning WPA block period!\n"));
-        pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
-        Status = MLME_STATE_MACHINE_REJECT;
-        MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_AUTH_CONF, 2, &Status);
-	}
-    else if(MlmeAuthReqSanity(pAd, Elem->Msg, Elem->MsgLen, Addr, &Timeout, &Alg))
-    {
-        // reset timer
-        RTMPCancelTimer(&pAd->MlmeAux.AuthTimer, &TimerCancelled);
-        COPY_MAC_ADDR(pAd->MlmeAux.Bssid, Addr);
-        pAd->MlmeAux.Alg  = Alg;
-        Seq = 1;
-        Status = MLME_SUCCESS;
-
-        NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-        if(NStatus != NDIS_STATUS_SUCCESS)
-        {
-            DBGPRINT(RT_DEBUG_TRACE, ("AUTH - MlmeAuthReqAction(Alg:%d) allocate memory failed\n", Alg));
-            pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
-            Status = MLME_FAIL_NO_RESOURCE;
-            MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_AUTH_CONF, 2, &Status);
-            return;
-        }
-
-        DBGPRINT(RT_DEBUG_TRACE, ("AUTH - Send AUTH request seq#1 (Alg=%d)...\n", Alg));
-        MgtMacHeaderInit(pAd, &AuthHdr, SUBTYPE_AUTH, 0, Addr, pAd->MlmeAux.Bssid);
-        MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-                          sizeof(HEADER_802_11),&AuthHdr,
-                          2,                    &Alg,
-                          2,                    &Seq,
-                          2,                    &Status,
-                          END_OF_ARGS);
-        MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-    	MlmeFreeMemory(pAd, pOutBuffer);
-
-        RTMPSetTimer(&pAd->MlmeAux.AuthTimer, Timeout);
-        pAd->Mlme.AuthMachine.CurrState = AUTH_WAIT_SEQ2;
-    }
-    else
-    {
-        DBGPRINT_ERR(("AUTH - MlmeAuthReqAction() sanity check failed\n"));
-        pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
-        Status = MLME_INVALID_FORMAT;
-        MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_AUTH_CONF, 2, &Status);
-    }
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID PeerAuthRspAtSeq2Action(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-    UCHAR         Addr2[MAC_ADDR_LEN];
-    USHORT        Seq, Status, RemoteStatus, Alg;
-    UCHAR         ChlgText[CIPHER_TEXT_LEN];
-    UCHAR         CyperChlgText[CIPHER_TEXT_LEN + 8 + 8];
-    UCHAR         Element[2];
-    HEADER_802_11 AuthHdr;
-    BOOLEAN       TimerCancelled;
-    PUCHAR        pOutBuffer = NULL;
-    NDIS_STATUS   NStatus;
-    ULONG         FrameLen = 0;
-    USHORT        Status2;
-
-    if (PeerAuthSanity(pAd, Elem->Msg, Elem->MsgLen, Addr2, &Alg, &Seq, &Status, ChlgText))
-    {
-        if (MAC_ADDR_EQUAL(pAd->MlmeAux.Bssid, Addr2) && Seq == 2)
-        {
-            DBGPRINT(RT_DEBUG_TRACE, ("AUTH - Receive AUTH_RSP seq#2 to me (Alg=%d, Status=%d)\n", Alg, Status));
-            RTMPCancelTimer(&pAd->MlmeAux.AuthTimer, &TimerCancelled);
-
-            if (Status == MLME_SUCCESS)
-            {
-                // Authentication Mode "LEAP" has allow for CCX 1.X
-                if ((pAd->MlmeAux.Alg == Ndis802_11AuthModeOpen)
-#ifdef LEAP_SUPPORT
-					|| (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-#endif // LEAP_SUPPORT //
-				)
-                {
-                    pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
-#ifdef LEAP_SUPPORT
-                    pAd->Mlme.LeapMachine.CurrState = LEAP_IDLE;
-#endif // LEAP_SUPPORT //
-                    MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_AUTH_CONF, 2, &Status);
-                }
-                else
-                {
-                    // 2. shared key, need to be challenged
-                    Seq++;
-                    RemoteStatus = MLME_SUCCESS;
-
-					// Get an unused nonpaged memory
-                    NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);
-                    if(NStatus != NDIS_STATUS_SUCCESS)
-                    {
-                        DBGPRINT(RT_DEBUG_TRACE, ("AUTH - PeerAuthRspAtSeq2Action() allocate memory fail\n"));
-                        pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
-                        Status2 = MLME_FAIL_NO_RESOURCE;
-                        MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_AUTH_CONF, 2, &Status2);
-                        return;
-                    }
-
-                    DBGPRINT(RT_DEBUG_TRACE, ("AUTH - Send AUTH request seq#3...\n"));
-                    MgtMacHeaderInit(pAd, &AuthHdr, SUBTYPE_AUTH, 0, Addr2, pAd->MlmeAux.Bssid);
-                    AuthHdr.FC.Wep = 1;
-                    // Encrypt challenge text & auth information
-                    RTMPInitWepEngine(
-                    	pAd,
-                    	pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key,
-                    	pAd->StaCfg.DefaultKeyId,
-                    	pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].KeyLen,
-                    	CyperChlgText);
-
-					Alg = cpu2le16(*(USHORT *)&Alg);
-					Seq = cpu2le16(*(USHORT *)&Seq);
-					RemoteStatus= cpu2le16(*(USHORT *)&RemoteStatus);
-
-					RTMPEncryptData(pAd, (PUCHAR) &Alg, CyperChlgText + 4, 2);
-					RTMPEncryptData(pAd, (PUCHAR) &Seq, CyperChlgText + 6, 2);
-					RTMPEncryptData(pAd, (PUCHAR) &RemoteStatus, CyperChlgText + 8, 2);
-					Element[0] = 16;
-					Element[1] = 128;
-					RTMPEncryptData(pAd, Element, CyperChlgText + 10, 2);
-					RTMPEncryptData(pAd, ChlgText, CyperChlgText + 12, 128);
-					RTMPSetICV(pAd, CyperChlgText + 140);
-                    MakeOutgoingFrame(pOutBuffer,               &FrameLen,
-                                      sizeof(HEADER_802_11),    &AuthHdr,
-                                      CIPHER_TEXT_LEN + 16,     CyperChlgText,
-                                      END_OF_ARGS);
-                    MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-                	MlmeFreeMemory(pAd, pOutBuffer);
-
-                    RTMPSetTimer(&pAd->MlmeAux.AuthTimer, AUTH_TIMEOUT);
-                    pAd->Mlme.AuthMachine.CurrState = AUTH_WAIT_SEQ4;
-                }
-            }
-            else
-            {
-#ifdef LEAP_SUPPORT
-                if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-                {
-                    //Invalid Authentication possible rogue AP
-                    //Add this Ap to Rogue AP.
-                    RogueApTableSetEntry(pAd, &pAd->StaCfg.RogueApTab, Addr2, LEAP_REASON_INVALID_AUTH);
-				}
-#endif // LEAP_SUPPORT //
-                pAd->StaCfg.AuthFailReason = Status;
-                COPY_MAC_ADDR(pAd->StaCfg.AuthFailSta, Addr2);
-                pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
-                MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_AUTH_CONF, 2, &Status);
-            }
-        }
-    }
-    else
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("AUTH - PeerAuthSanity() sanity check fail\n"));
-    }
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID PeerAuthRspAtSeq4Action(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-    UCHAR         Addr2[MAC_ADDR_LEN];
-    USHORT        Alg, Seq, Status;
-    CHAR          ChlgText[CIPHER_TEXT_LEN];
-    BOOLEAN       TimerCancelled;
-
-    if(PeerAuthSanity(pAd, Elem->Msg, Elem->MsgLen, Addr2, &Alg, &Seq, &Status, ChlgText))
-    {
-        if(MAC_ADDR_EQUAL(pAd->MlmeAux.Bssid, Addr2) && Seq == 4)
-        {
-            DBGPRINT(RT_DEBUG_TRACE, ("AUTH - Receive AUTH_RSP seq#4 to me\n"));
-            RTMPCancelTimer(&pAd->MlmeAux.AuthTimer, &TimerCancelled);
-
-            if (Status != MLME_SUCCESS)
-            {
-                pAd->StaCfg.AuthFailReason = Status;
-                COPY_MAC_ADDR(pAd->StaCfg.AuthFailSta, Addr2);
-            }
-
-            pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
-            MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_AUTH_CONF, 2, &Status);
-        }
-    }
-    else
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("AUTH - PeerAuthRspAtSeq4Action() sanity check fail\n"));
-    }
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID MlmeDeauthReqAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-    MLME_DEAUTH_REQ_STRUCT *pInfo;
-    HEADER_802_11 DeauthHdr;
-    PUCHAR        pOutBuffer = NULL;
-    NDIS_STATUS   NStatus;
-    ULONG         FrameLen = 0;
-    USHORT        Status;
-
-    pInfo = (MLME_DEAUTH_REQ_STRUCT *)Elem->Msg;
-
-    NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-    if (NStatus != NDIS_STATUS_SUCCESS)
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("AUTH - MlmeDeauthReqAction() allocate memory fail\n"));
-        pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
-        Status = MLME_FAIL_NO_RESOURCE;
-        MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_DEAUTH_CONF, 2, &Status);
-        return;
-    }
-
-    DBGPRINT(RT_DEBUG_TRACE, ("AUTH - Send DE-AUTH request (Reason=%d)...\n", pInfo->Reason));
-    MgtMacHeaderInit(pAd, &DeauthHdr, SUBTYPE_DEAUTH, 0, pInfo->Addr, pAd->MlmeAux.Bssid);
-    MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-                      sizeof(HEADER_802_11),&DeauthHdr,
-                      2,                    &pInfo->Reason,
-                      END_OF_ARGS);
-    MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-    pAd->StaCfg.DeauthReason = pInfo->Reason;
-    COPY_MAC_ADDR(pAd->StaCfg.DeauthSta, pInfo->Addr);
-    pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
-    Status = MLME_SUCCESS;
-    MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_DEAUTH_CONF, 2, &Status);
-
-	// send wireless event - for deauthentication
-	if (pAd->CommonCfg.bWirelessEvent)
-		RTMPSendWirelessEvent(pAd, IW_DEAUTH_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID AuthTimeoutAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-    USHORT Status;
-    DBGPRINT(RT_DEBUG_TRACE, ("AUTH - AuthTimeoutAction\n"));
-    pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
-    Status = MLME_REJ_TIMEOUT;
-    MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_AUTH_CONF, 2, &Status);
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID InvalidStateWhenAuth(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-    USHORT Status;
-    DBGPRINT(RT_DEBUG_TRACE, ("AUTH - InvalidStateWhenAuth (state=%ld), reset AUTH state machine\n", pAd->Mlme.AuthMachine.CurrState));
-    pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
-    Status = MLME_STATE_MACHINE_REJECT;
-    MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_AUTH_CONF, 2, &Status);
-}
-
-/*
-    ==========================================================================
-    Description:
-        Some STA/AP
-    Note:
-        This action should never trigger AUTH state transition, therefore we
-        separate it from AUTH state machine, and make it as a standalone service
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID Cls2errAction(
-    IN PRTMP_ADAPTER pAd,
-    IN PUCHAR pAddr)
-{
-    HEADER_802_11 DeauthHdr;
-    PUCHAR        pOutBuffer = NULL;
-    NDIS_STATUS   NStatus;
-    ULONG         FrameLen = 0;
-    USHORT        Reason = REASON_CLS2ERR;
-
-    NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-    if (NStatus != NDIS_STATUS_SUCCESS)
-        return;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("AUTH - Class 2 error, Send DEAUTH frame...\n"));
-    MgtMacHeaderInit(pAd, &DeauthHdr, SUBTYPE_DEAUTH, 0, pAddr, pAd->MlmeAux.Bssid);
-    MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-                      sizeof(HEADER_802_11),&DeauthHdr,
-                      2,                    &Reason,
-                      END_OF_ARGS);
-    MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-    pAd->StaCfg.DeauthReason = Reason;
-    COPY_MAC_ADDR(pAd->StaCfg.DeauthSta, pAddr);
-}
-
-
+#include "../../rt2860/sta/auth.c"
diff --git a/drivers/staging/rt2870/sta/auth_rsp.c b/drivers/staging/rt2870/sta/auth_rsp.c
index 6e3c2d24cda..783e266d3e8 100644
--- a/drivers/staging/rt2870/sta/auth_rsp.c
+++ b/drivers/staging/rt2870/sta/auth_rsp.c
@@ -1,166 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	auth_rsp.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	John		2004-10-1		copy from RT2560
-*/
-#include "../rt_config.h"
-
-/*
-    ==========================================================================
-    Description:
-        authentication state machine init procedure
-    Parameters:
-        Sm - the state machine
-
-	IRQL = PASSIVE_LEVEL
-
-    ==========================================================================
- */
-VOID AuthRspStateMachineInit(
-    IN PRTMP_ADAPTER pAd,
-    IN PSTATE_MACHINE Sm,
-    IN STATE_MACHINE_FUNC Trans[])
-{
-    StateMachineInit(Sm, Trans, MAX_AUTH_RSP_STATE, MAX_AUTH_RSP_MSG, (STATE_MACHINE_FUNC)Drop, AUTH_RSP_IDLE, AUTH_RSP_MACHINE_BASE);
-
-    // column 1
-    StateMachineSetAction(Sm, AUTH_RSP_IDLE, MT2_PEER_DEAUTH, (STATE_MACHINE_FUNC)PeerDeauthAction);
-
-    // column 2
-    StateMachineSetAction(Sm, AUTH_RSP_WAIT_CHAL, MT2_PEER_DEAUTH, (STATE_MACHINE_FUNC)PeerDeauthAction);
-
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
-*/
-VOID PeerAuthSimpleRspGenAndSend(
-    IN PRTMP_ADAPTER pAd,
-    IN PHEADER_802_11 pHdr80211,
-    IN USHORT Alg,
-    IN USHORT Seq,
-    IN USHORT Reason,
-    IN USHORT Status)
-{
-    HEADER_802_11     AuthHdr;
-    ULONG             FrameLen = 0;
-    PUCHAR            pOutBuffer = NULL;
-    NDIS_STATUS       NStatus;
-
-    if (Reason != MLME_SUCCESS)
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("Peer AUTH fail...\n"));
-        return;
-    }
-
-	//Get an unused nonpaged memory
-    NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);
-    if (NStatus != NDIS_STATUS_SUCCESS)
-        return;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Send AUTH response (seq#2)...\n"));
-    MgtMacHeaderInit(pAd, &AuthHdr, SUBTYPE_AUTH, 0, pHdr80211->Addr2, pAd->MlmeAux.Bssid);
-    MakeOutgoingFrame(pOutBuffer,               &FrameLen,
-                      sizeof(HEADER_802_11),    &AuthHdr,
-                      2,                        &Alg,
-                      2,                        &Seq,
-                      2,                        &Reason,
-                      END_OF_ARGS);
-    MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
-*/
-VOID PeerDeauthAction(
-    IN PRTMP_ADAPTER pAd,
-    IN PMLME_QUEUE_ELEM Elem)
-{
-    UCHAR       Addr2[MAC_ADDR_LEN];
-    USHORT      Reason;
-
-    if (PeerDeauthSanity(pAd, Elem->Msg, Elem->MsgLen, Addr2, &Reason))
-    {
-        if (INFRA_ON(pAd) && MAC_ADDR_EQUAL(Addr2, pAd->CommonCfg.Bssid))
-        {
-            DBGPRINT(RT_DEBUG_TRACE,("AUTH_RSP - receive DE-AUTH from our AP (Reason=%d)\n", Reason));
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-            {
-                union iwreq_data    wrqu;
-                memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN);
-                wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
-            }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-
-
-			// send wireless event - for deauthentication
-			if (pAd->CommonCfg.bWirelessEvent)
-				RTMPSendWirelessEvent(pAd, IW_DEAUTH_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-
-            LinkDown(pAd, TRUE);
-
-            // Authentication Mode Cisco_LEAP has start a timer
-            // We should cancel it if using LEAP
-#ifdef LEAP_SUPPORT
-            if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-            {
-                RTMPCancelTimer(&pAd->StaCfg.LeapAuthTimer, &TimerCancelled);
-                //Check is it mach the LEAP Authentication failed as possible a Rogue AP
-                //on it's PortSecured not equal to WPA_802_1X_PORT_SECURED while process the Authenticaton.
-                if ((pAd->StaCfg.PortSecured != WPA_802_1X_PORT_SECURED) && (pAd->Mlme.LeapMachine.CurrState != LEAP_IDLE))
-                {
-                    RogueApTableSetEntry(pAd, &pAd->StaCfg.RogueApTab, Addr2, LEAP_REASON_AUTH_TIMEOUT);
-                }
-            }
-#endif // LEAP_SUPPORT //
-        }
-    }
-    else
-    {
-        DBGPRINT(RT_DEBUG_TRACE,("AUTH_RSP - PeerDeauthAction() sanity check fail\n"));
-    }
-}
-
+#include "../../rt2860/sta/auth_rsp.c"
diff --git a/drivers/staging/rt2870/sta/connect.c b/drivers/staging/rt2870/sta/connect.c
index c93140a8caa..f6c7bbf542d 100644
--- a/drivers/staging/rt2870/sta/connect.c
+++ b/drivers/staging/rt2870/sta/connect.c
@@ -1,2822 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	connect.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	John			2004-08-08			Major modification from RT2560
-*/
-#include "../rt_config.h"
-
-UCHAR	CipherSuiteWpaNoneTkip[] = {
-		0x00, 0x50, 0xf2, 0x01,	// oui
-		0x01, 0x00,				// Version
-		0x00, 0x50, 0xf2, 0x02,	// Multicast
-		0x01, 0x00,				// Number of unicast
-		0x00, 0x50, 0xf2, 0x02,	// unicast
-		0x01, 0x00,				// number of authentication method
-		0x00, 0x50, 0xf2, 0x00	// authentication
-		};
-UCHAR	CipherSuiteWpaNoneTkipLen = (sizeof(CipherSuiteWpaNoneTkip) / sizeof(UCHAR));
-
-UCHAR	CipherSuiteWpaNoneAes[] = {
-		0x00, 0x50, 0xf2, 0x01,	// oui
-		0x01, 0x00,				// Version
-		0x00, 0x50, 0xf2, 0x04,	// Multicast
-		0x01, 0x00,				// Number of unicast
-		0x00, 0x50, 0xf2, 0x04,	// unicast
-		0x01, 0x00,				// number of authentication method
-		0x00, 0x50, 0xf2, 0x00	// authentication
-		};
-UCHAR	CipherSuiteWpaNoneAesLen = (sizeof(CipherSuiteWpaNoneAes) / sizeof(UCHAR));
-
-// The following MACRO is called after 1. starting an new IBSS, 2. succesfully JOIN an IBSS,
-// or 3. succesfully ASSOCIATE to a BSS, 4. successfully RE_ASSOCIATE to a BSS
-// All settings successfuly negotiated furing MLME state machines become final settings
-// and are copied to pAd->StaActive
-#define COPY_SETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(_pAd)                                 \
-{                                                                                       \
-	(_pAd)->CommonCfg.SsidLen = (_pAd)->MlmeAux.SsidLen;                                \
-	NdisMoveMemory((_pAd)->CommonCfg.Ssid, (_pAd)->MlmeAux.Ssid, (_pAd)->MlmeAux.SsidLen); \
-	COPY_MAC_ADDR((_pAd)->CommonCfg.Bssid, (_pAd)->MlmeAux.Bssid);                      \
-	(_pAd)->CommonCfg.Channel = (_pAd)->MlmeAux.Channel;                                \
-	(_pAd)->CommonCfg.CentralChannel = (_pAd)->MlmeAux.CentralChannel;                  \
-	(_pAd)->StaActive.Aid = (_pAd)->MlmeAux.Aid;                                        \
-	(_pAd)->StaActive.AtimWin = (_pAd)->MlmeAux.AtimWin;                                \
-	(_pAd)->StaActive.CapabilityInfo = (_pAd)->MlmeAux.CapabilityInfo;                  \
-	(_pAd)->CommonCfg.BeaconPeriod = (_pAd)->MlmeAux.BeaconPeriod;                      \
-	(_pAd)->StaActive.CfpMaxDuration = (_pAd)->MlmeAux.CfpMaxDuration;                  \
-	(_pAd)->StaActive.CfpPeriod = (_pAd)->MlmeAux.CfpPeriod;                            \
-	(_pAd)->StaActive.SupRateLen = (_pAd)->MlmeAux.SupRateLen;                          \
-	NdisMoveMemory((_pAd)->StaActive.SupRate, (_pAd)->MlmeAux.SupRate, (_pAd)->MlmeAux.SupRateLen);\
-	(_pAd)->StaActive.ExtRateLen = (_pAd)->MlmeAux.ExtRateLen;                          \
-	NdisMoveMemory((_pAd)->StaActive.ExtRate, (_pAd)->MlmeAux.ExtRate, (_pAd)->MlmeAux.ExtRateLen);\
-	NdisMoveMemory(&(_pAd)->CommonCfg.APEdcaParm, &(_pAd)->MlmeAux.APEdcaParm, sizeof(EDCA_PARM));\
-	NdisMoveMemory(&(_pAd)->CommonCfg.APQosCapability, &(_pAd)->MlmeAux.APQosCapability, sizeof(QOS_CAPABILITY_PARM));\
-	NdisMoveMemory(&(_pAd)->CommonCfg.APQbssLoad, &(_pAd)->MlmeAux.APQbssLoad, sizeof(QBSS_LOAD_PARM));\
-	COPY_MAC_ADDR((_pAd)->MacTab.Content[BSSID_WCID].Addr, (_pAd)->MlmeAux.Bssid);      \
-	(_pAd)->MacTab.Content[BSSID_WCID].Aid = (_pAd)->MlmeAux.Aid;                       \
-	(_pAd)->MacTab.Content[BSSID_WCID].PairwiseKey.CipherAlg = (_pAd)->StaCfg.PairCipher;\
-	COPY_MAC_ADDR((_pAd)->MacTab.Content[BSSID_WCID].PairwiseKey.BssId, (_pAd)->MlmeAux.Bssid);\
-	(_pAd)->MacTab.Content[BSSID_WCID].RateLen = (_pAd)->StaActive.SupRateLen + (_pAd)->StaActive.ExtRateLen;\
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = PASSIVE_LEVEL
-
-	==========================================================================
-*/
-VOID MlmeCntlInit(
-	IN PRTMP_ADAPTER pAd,
-	IN STATE_MACHINE *S,
-	OUT STATE_MACHINE_FUNC Trans[])
-{
-	// Control state machine differs from other state machines, the interface
-	// follows the standard interface
-	pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID MlmeCntlMachinePerformAction(
-	IN PRTMP_ADAPTER pAd,
-	IN STATE_MACHINE *S,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	switch(pAd->Mlme.CntlMachine.CurrState)
-	{
-		case CNTL_IDLE:
-				CntlIdleProc(pAd, Elem);
-			break;
-		case CNTL_WAIT_DISASSOC:
-			CntlWaitDisassocProc(pAd, Elem);
-			break;
-		case CNTL_WAIT_JOIN:
-			CntlWaitJoinProc(pAd, Elem);
-			break;
-
-		// CNTL_WAIT_REASSOC is the only state in CNTL machine that does
-		// not triggered directly or indirectly by "RTMPSetInformation(OID_xxx)".
-		// Therefore not protected by NDIS's "only one outstanding OID request"
-		// rule. Which means NDIS may SET OID in the middle of ROAMing attempts.
-		// Current approach is to block new SET request at RTMPSetInformation()
-		// when CntlMachine.CurrState is not CNTL_IDLE
-		case CNTL_WAIT_REASSOC:
-			CntlWaitReassocProc(pAd, Elem);
-			break;
-
-		case CNTL_WAIT_START:
-			CntlWaitStartProc(pAd, Elem);
-			break;
-		case CNTL_WAIT_AUTH:
-			CntlWaitAuthProc(pAd, Elem);
-			break;
-		case CNTL_WAIT_AUTH2:
-			CntlWaitAuthProc2(pAd, Elem);
-			break;
-		case CNTL_WAIT_ASSOC:
-			CntlWaitAssocProc(pAd, Elem);
-			break;
-
-		case CNTL_WAIT_OID_LIST_SCAN:
-			if(Elem->MsgType == MT2_SCAN_CONF)
-			{
-				// Resume TxRing after SCANING complete. We hope the out-of-service time
-				// won't be too long to let upper layer time-out the waiting frames
-				RTMPResumeMsduTransmission(pAd);
-				if (pAd->StaCfg.CCXReqType != MSRN_TYPE_UNUSED)
-				{
-					// Cisco scan request is finished, prepare beacon report
-					MlmeEnqueue(pAd, AIRONET_STATE_MACHINE, MT2_AIRONET_SCAN_DONE, 0, NULL);
-				}
-				pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-
-                //
-				// Set LED status to previous status.
-				//
-				if (pAd->bLedOnScanning)
-				{
-					pAd->bLedOnScanning = FALSE;
-					RTMPSetLED(pAd, pAd->LedStatus);
-				}
-#ifdef DOT11N_DRAFT3
-				// AP sent a 2040Coexistence mgmt frame, then station perform a scan, and then send back the respone.
-				if (pAd->CommonCfg.BSSCoexist2040.field.InfoReq == 1)
-				{
-					Update2040CoexistFrameAndNotify(pAd, BSSID_WCID, TRUE);
-				}
-#endif // DOT11N_DRAFT3 //
-			}
-			break;
-
-		case CNTL_WAIT_OID_DISASSOC:
-			if (Elem->MsgType == MT2_DISASSOC_CONF)
-			{
-				LinkDown(pAd, FALSE);
-				pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-			}
-			break;
-#ifdef RT2870
-		//
-		// This state is for that we want to connect to an AP but
-		// it didn't find on BSS List table. So we need to scan the air first,
-		// after that we can try to connect to the desired AP if available.
-		//
-		case CNTL_WAIT_SCAN_FOR_CONNECT:
-			if(Elem->MsgType == MT2_SCAN_CONF)
-			{
-				// Resume TxRing after SCANING complete. We hope the out-of-service time
-				// won't be too long to let upper layer time-out the waiting frames
-				RTMPResumeMsduTransmission(pAd);
-#ifdef CCX_SUPPORT
-				if (pAd->StaCfg.CCXReqType != MSRN_TYPE_UNUSED)
-				{
-					// Cisco scan request is finished, prepare beacon report
-					MlmeEnqueue(pAd, AIRONET_STATE_MACHINE, MT2_AIRONET_SCAN_DONE, 0, NULL);
-				}
-#endif // CCX_SUPPORT //
-				pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-
-				//
-				// Check if we can connect to.
-				//
-				BssTableSsidSort(pAd, &pAd->MlmeAux.SsidBssTab, pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
-				if (pAd->MlmeAux.SsidBssTab.BssNr > 0)
-				{
-					MlmeAutoReconnectLastSSID(pAd);
-				}
-			}
-			break;
-#endif // RT2870 //
-		default:
-			DBGPRINT_ERR(("!ERROR! CNTL - Illegal message type(=%ld)", Elem->MsgType));
-			break;
-	}
-}
-
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID CntlIdleProc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	MLME_DISASSOC_REQ_STRUCT   DisassocReq;
-
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))
-		return;
-
-	switch(Elem->MsgType)
-	{
-		case OID_802_11_SSID:
-			CntlOidSsidProc(pAd, Elem);
-			break;
-
-		case OID_802_11_BSSID:
-			CntlOidRTBssidProc(pAd,Elem);
-			break;
-
-		case OID_802_11_BSSID_LIST_SCAN:
-			CntlOidScanProc(pAd,Elem);
-			break;
-
-		case OID_802_11_DISASSOCIATE:
-#ifdef RALINK_ATE
-			if(ATE_ON(pAd))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				break;
-			}
-#endif // RALINK_ATE //
-			DisassocParmFill(pAd, &DisassocReq, pAd->CommonCfg.Bssid, REASON_DISASSOC_STA_LEAVING);
-			MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ, sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq);
-			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
-#ifdef WPA_SUPPLICANT_SUPPORT
-            if (pAd->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_ENABLE_WITH_WEB_UI)
-#endif // WPA_SUPPLICANT_SUPPORT //
-            {
-    			// Set the AutoReconnectSsid to prevent it reconnect to old SSID
-    			// Since calling this indicate user don't want to connect to that SSID anymore.
-    			pAd->MlmeAux.AutoReconnectSsidLen= 32;
-    			NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
-            }
-			break;
-
-		case MT2_MLME_ROAMING_REQ:
-			CntlMlmeRoamingProc(pAd, Elem);
-			break;
-
-        case OID_802_11_MIC_FAILURE_REPORT_FRAME:
-            WpaMicFailureReportFrame(pAd, Elem);
-            break;
-
-#ifdef QOS_DLS_SUPPORT
-		case RT_OID_802_11_SET_DLS_PARAM:
-			CntlOidDLSSetupProc(pAd, Elem);
-			break;
-#endif // QOS_DLS_SUPPORT //
-
-		default:
-			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Illegal message in CntlIdleProc(MsgType=%ld)\n",Elem->MsgType));
-			break;
-	}
-}
-
-VOID CntlOidScanProc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	MLME_SCAN_REQ_STRUCT       ScanReq;
-	ULONG                      BssIdx = BSS_NOT_FOUND;
-	BSS_ENTRY                  CurrBss;
-
-#ifdef RALINK_ATE
-/* Disable scanning when ATE is running. */
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-
-	// record current BSS if network is connected.
-	// 2003-2-13 do not include current IBSS if this is the only STA in this IBSS.
-	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
-	{
-		BssIdx = BssSsidTableSearch(&pAd->ScanTab, pAd->CommonCfg.Bssid, pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen, pAd->CommonCfg.Channel);
-		if (BssIdx != BSS_NOT_FOUND)
-		{
-			NdisMoveMemory(&CurrBss, &pAd->ScanTab.BssEntry[BssIdx], sizeof(BSS_ENTRY));
-		}
-	}
-
-	// clean up previous SCAN result, add current BSS back to table if any
-	BssTableInit(&pAd->ScanTab);
-	if (BssIdx != BSS_NOT_FOUND)
-	{
-		// DDK Note: If the NIC is associated with a particular BSSID and SSID
-		//    that are not contained in the list of BSSIDs generated by this scan, the
-		//    BSSID description of the currently associated BSSID and SSID should be
-		//    appended to the list of BSSIDs in the NIC's database.
-		// To ensure this, we append this BSS as the first entry in SCAN result
-		NdisMoveMemory(&pAd->ScanTab.BssEntry[0], &CurrBss, sizeof(BSS_ENTRY));
-		pAd->ScanTab.BssNr = 1;
-	}
-
-	ScanParmFill(pAd, &ScanReq, "", 0, BSS_ANY, SCAN_ACTIVE);
-	MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_SCAN_REQ,
-		sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq);
-	pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_LIST_SCAN;
-}
-
-/*
-	==========================================================================
-	Description:
-		Before calling this routine, user desired SSID should already been
-		recorded in CommonCfg.Ssid[]
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID CntlOidSsidProc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM * Elem)
-{
-	PNDIS_802_11_SSID          pOidSsid = (NDIS_802_11_SSID *)Elem->Msg;
-	MLME_DISASSOC_REQ_STRUCT   DisassocReq;
-	ULONG					   Now;
-
-	// Step 1. record the desired user settings to MlmeAux
-	NdisZeroMemory(pAd->MlmeAux.Ssid, MAX_LEN_OF_SSID);
-	NdisMoveMemory(pAd->MlmeAux.Ssid, pOidSsid->Ssid, pOidSsid->SsidLength);
-	pAd->MlmeAux.SsidLen = (UCHAR)pOidSsid->SsidLength;
-	NdisZeroMemory(pAd->MlmeAux.Bssid, MAC_ADDR_LEN);
-	pAd->MlmeAux.BssType = pAd->StaCfg.BssType;
-
-
-	//
-	// Update Reconnect Ssid, that user desired to connect.
-	//
-	NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, MAX_LEN_OF_SSID);
-	NdisMoveMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen);
-	pAd->MlmeAux.AutoReconnectSsidLen = pAd->MlmeAux.SsidLen;
-
-	// step 2. find all matching BSS in the lastest SCAN result (inBssTab)
-	//    & log them into MlmeAux.SsidBssTab for later-on iteration. Sort by RSSI order
-	BssTableSsidSort(pAd, &pAd->MlmeAux.SsidBssTab, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("CntlOidSsidProc():CNTL - %d BSS of %d BSS match the desire (%d)SSID - %s\n",
-			pAd->MlmeAux.SsidBssTab.BssNr, pAd->ScanTab.BssNr, pAd->MlmeAux.SsidLen, pAd->MlmeAux.Ssid));
-	NdisGetSystemUpTime(&Now);
-
-	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) &&
-		(pAd->CommonCfg.SsidLen == pAd->MlmeAux.SsidBssTab.BssEntry[0].SsidLen) &&
-		NdisEqualMemory(pAd->CommonCfg.Ssid, pAd->MlmeAux.SsidBssTab.BssEntry[0].Ssid, pAd->CommonCfg.SsidLen) &&
-		MAC_ADDR_EQUAL(pAd->CommonCfg.Bssid, pAd->MlmeAux.SsidBssTab.BssEntry[0].Bssid))
-	{
-		// Case 1. already connected with an AP who has the desired SSID
-		//         with highest RSSI
-
-		// Add checking Mode "LEAP" for CCX 1.0
-		if (((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) ||
-			 (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
-			 (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) ||
-			 (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)
-#ifdef LEAP_SUPPORT
-			 || (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-#endif // LEAP_SUPPORT //
-			 ) &&
-			(pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
-		{
-			// case 1.1 For WPA, WPA-PSK, if the 1x port is not secured, we have to redo
-			//          connection process
-			DBGPRINT(RT_DEBUG_TRACE, ("CntlOidSsidProc():CNTL - disassociate with current AP...\n"));
-			DisassocParmFill(pAd, &DisassocReq, pAd->CommonCfg.Bssid, REASON_DISASSOC_STA_LEAVING);
-			MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ,
-						sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq);
-			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_DISASSOC;
-		}
-		else if (pAd->bConfigChanged == TRUE)
-		{
-			// case 1.2 Important Config has changed, we have to reconnect to the same AP
-			DBGPRINT(RT_DEBUG_TRACE, ("CntlOidSsidProc():CNTL - disassociate with current AP Because config changed...\n"));
-			DisassocParmFill(pAd, &DisassocReq, pAd->CommonCfg.Bssid, REASON_DISASSOC_STA_LEAVING);
-			MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ,
-						sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq);
-			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_DISASSOC;
-		}
-		else
-		{
-			// case 1.3. already connected to the SSID with highest RSSI.
-			DBGPRINT(RT_DEBUG_TRACE, ("CntlOidSsidProc():CNTL - already with this BSSID. ignore this SET_SSID request\n"));
-			//
-			// (HCT 12.1) 1c_wlan_mediaevents required
-			// media connect events are indicated when associating with the same AP
-			//
-			if (INFRA_ON(pAd))
-			{
-				//
-				// Since MediaState already is NdisMediaStateConnected
-				// We just indicate the connect event again to meet the WHQL required.
-				//
-				pAd->IndicateMediaState = NdisMediaStateConnected;
-				RTMP_IndicateMediaState(pAd);
-                pAd->ExtraInfo = GENERAL_LINK_UP;   // Update extra information to link is up
-			}
-
-			pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-            {
-                union iwreq_data    wrqu;
-
-                memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN);
-                memcpy(wrqu.ap_addr.sa_data, pAd->MlmeAux.Bssid, MAC_ADDR_LEN);
-                wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
-
-            }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-		}
-	}
-	else if (INFRA_ON(pAd))
-	{
-		//
-		// For RT61
-		// [88888] OID_802_11_SSID should have returned NDTEST_WEP_AP2(Returned: )
-		// RT61 may lost SSID, and not connect to NDTEST_WEP_AP2 and will connect to NDTEST_WEP_AP2 by Autoreconnect
-		// But media status is connected, so the SSID not report correctly.
-		//
-		if (!SSID_EQUAL(pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen))
-		{
-			//
-			// Different SSID means not Roaming case, so we let LinkDown() to Indicate a disconnect event.
-			//
-			pAd->MlmeAux.CurrReqIsFromNdis = TRUE;
-		}
-		// case 2. active INFRA association existent
-		//    roaming is done within miniport driver, nothing to do with configuration
-		//    utility. so upon a new SET(OID_802_11_SSID) is received, we just
-		//    disassociate with the current associated AP,
-		//    then perform a new association with this new SSID, no matter the
-		//    new/old SSID are the same or not.
-		DBGPRINT(RT_DEBUG_TRACE, ("CntlOidSsidProc():CNTL - disassociate with current AP...\n"));
-		DisassocParmFill(pAd, &DisassocReq, pAd->CommonCfg.Bssid, REASON_DISASSOC_STA_LEAVING);
-		MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ,
-					sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq);
-		pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_DISASSOC;
-	}
-	else
-	{
-		if (ADHOC_ON(pAd))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("CntlOidSsidProc():CNTL - drop current ADHOC\n"));
-			LinkDown(pAd, FALSE);
-			OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
-			pAd->IndicateMediaState = NdisMediaStateDisconnected;
-			RTMP_IndicateMediaState(pAd);
-            pAd->ExtraInfo = GENERAL_LINK_DOWN;
-			DBGPRINT(RT_DEBUG_TRACE, ("CntlOidSsidProc():NDIS_STATUS_MEDIA_DISCONNECT Event C!\n"));
-		}
-
-		if ((pAd->MlmeAux.SsidBssTab.BssNr == 0) &&
-			(pAd->StaCfg.bAutoReconnect == TRUE) &&
-			(pAd->MlmeAux.BssType == BSS_INFRA) &&
-			(MlmeValidateSSID(pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen) == TRUE)
-			)
-		{
-			MLME_SCAN_REQ_STRUCT       ScanReq;
-
-			DBGPRINT(RT_DEBUG_TRACE, ("CntlOidSsidProc():CNTL - No matching BSS, start a new scan\n"));
-			ScanParmFill(pAd, &ScanReq, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen, BSS_ANY, SCAN_ACTIVE);
-			MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_SCAN_REQ, sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq);
-			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_LIST_SCAN;
-			// Reset Missed scan number
-			pAd->StaCfg.LastScanTime = Now;
-		}
-		else
-		{
-			pAd->MlmeAux.BssIdx = 0;
-			IterateOnBssTab(pAd);
-		}
-	}
-}
-
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID CntlOidRTBssidProc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM * Elem)
-{
-	ULONG       BssIdx;
-	PUCHAR      pOidBssid = (PUCHAR)Elem->Msg;
-	MLME_DISASSOC_REQ_STRUCT    DisassocReq;
-	MLME_JOIN_REQ_STRUCT        JoinReq;
-
-#ifdef RALINK_ATE
-/* No need to perform this routine when ATE is running. */
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-	// record user desired settings
-	COPY_MAC_ADDR(pAd->MlmeAux.Bssid, pOidBssid);
-	pAd->MlmeAux.BssType = pAd->StaCfg.BssType;
-
-	//
-	// Update Reconnect Ssid, that user desired to connect.
-	//
-	NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, MAX_LEN_OF_SSID);
-	pAd->MlmeAux.AutoReconnectSsidLen = pAd->MlmeAux.SsidLen;
-	NdisMoveMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen);
-
-	// find the desired BSS in the latest SCAN result table
-	BssIdx = BssTableSearch(&pAd->ScanTab, pOidBssid, pAd->MlmeAux.Channel);
-	if (BssIdx == BSS_NOT_FOUND)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("CNTL - BSSID not found. reply NDIS_STATUS_NOT_ACCEPTED\n"));
-		pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-		return;
-	}
-
-	// copy the matched BSS entry from ScanTab to MlmeAux.SsidBssTab. Why?
-	// Because we need this entry to become the JOIN target in later on SYNC state machine
-	pAd->MlmeAux.BssIdx = 0;
-	pAd->MlmeAux.SsidBssTab.BssNr = 1;
-	NdisMoveMemory(&pAd->MlmeAux.SsidBssTab.BssEntry[0], &pAd->ScanTab.BssEntry[BssIdx], sizeof(BSS_ENTRY));
-
-	//pAd->MlmeAux.AutoReconnectSsidLen = pAd->ScanTab.BssEntry[BssIdx].SsidLen;
-	//NdisMoveMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->ScanTab.BssEntry[BssIdx].Ssid, pAd->ScanTab.BssEntry[BssIdx].SsidLen);
-
-	// Add SSID into MlmeAux for site surey joining hidden SSID
-	//pAd->MlmeAux.SsidLen = pAd->ScanTab.BssEntry[BssIdx].SsidLen;
-	//NdisMoveMemory(pAd->MlmeAux.Ssid, pAd->ScanTab.BssEntry[BssIdx].Ssid, pAd->MlmeAux.SsidLen);
-
-	// 2002-11-26 skip the following checking. i.e. if user wants to re-connect to same AP
-	//   we just follow normal procedure. The reason of user doing this may because he/she changed
-	//   AP to another channel, but we still received BEACON from it thus don't claim Link Down.
-	//   Since user knows he's changed AP channel, he'll re-connect again. By skipping the following
-	//   checking, we'll disassociate then re-do normal association with this AP at the new channel.
-	// 2003-1-6 Re-enable this feature based on microsoft requirement which prefer not to re-do
-	//   connection when setting the same BSSID.
-	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) &&
-		MAC_ADDR_EQUAL(pAd->CommonCfg.Bssid, pOidBssid))
-	{
-		// already connected to the same BSSID, go back to idle state directly
-		DBGPRINT(RT_DEBUG_TRACE, ("CNTL - already in this BSSID. ignore this SET_BSSID request\n"));
-		pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-            {
-                union iwreq_data    wrqu;
-
-                memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN);
-                memcpy(wrqu.ap_addr.sa_data, pAd->MlmeAux.Bssid, MAC_ADDR_LEN);
-                wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
-
-            }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-	}
-	else
-	{
-		if (INFRA_ON(pAd))
-		{
-			// disassoc from current AP first
-			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - disassociate with current AP ...\n"));
-			DisassocParmFill(pAd, &DisassocReq, pAd->CommonCfg.Bssid, REASON_DISASSOC_STA_LEAVING);
-			MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ,
-						sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq);
-
-			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_DISASSOC;
-		}
-		else
-		{
-			if (ADHOC_ON(pAd))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("CNTL - drop current ADHOC\n"));
-				LinkDown(pAd, FALSE);
-				OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
-				pAd->IndicateMediaState = NdisMediaStateDisconnected;
-				RTMP_IndicateMediaState(pAd);
-                pAd->ExtraInfo = GENERAL_LINK_DOWN;
-				DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event C!\n"));
-			}
-
-			// Change the wepstatus to original wepstatus
-			pAd->StaCfg.WepStatus   = pAd->StaCfg.OrigWepStatus;
-			pAd->StaCfg.PairCipher  = pAd->StaCfg.OrigWepStatus;
-			pAd->StaCfg.GroupCipher = pAd->StaCfg.OrigWepStatus;
-
-			// Check cipher suite, AP must have more secured cipher than station setting
-			// Set the Pairwise and Group cipher to match the intended AP setting
-			// We can only connect to AP with less secured cipher setting
-			if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK))
-			{
-				pAd->StaCfg.GroupCipher = pAd->ScanTab.BssEntry[BssIdx].WPA.GroupCipher;
-
-				if (pAd->StaCfg.WepStatus == pAd->ScanTab.BssEntry[BssIdx].WPA.PairCipher)
-					pAd->StaCfg.PairCipher = pAd->ScanTab.BssEntry[BssIdx].WPA.PairCipher;
-				else if (pAd->ScanTab.BssEntry[BssIdx].WPA.PairCipherAux != Ndis802_11WEPDisabled)
-					pAd->StaCfg.PairCipher = pAd->ScanTab.BssEntry[BssIdx].WPA.PairCipherAux;
-				else	// There is no PairCipher Aux, downgrade our capability to TKIP
-					pAd->StaCfg.PairCipher = Ndis802_11Encryption2Enabled;
-			}
-			else if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK))
-			{
-				pAd->StaCfg.GroupCipher = pAd->ScanTab.BssEntry[BssIdx].WPA2.GroupCipher;
-
-				if (pAd->StaCfg.WepStatus == pAd->ScanTab.BssEntry[BssIdx].WPA2.PairCipher)
-					pAd->StaCfg.PairCipher = pAd->ScanTab.BssEntry[BssIdx].WPA2.PairCipher;
-				else if (pAd->ScanTab.BssEntry[BssIdx].WPA2.PairCipherAux != Ndis802_11WEPDisabled)
-					pAd->StaCfg.PairCipher = pAd->ScanTab.BssEntry[BssIdx].WPA2.PairCipherAux;
-				else	// There is no PairCipher Aux, downgrade our capability to TKIP
-					pAd->StaCfg.PairCipher = Ndis802_11Encryption2Enabled;
-
-				// RSN capability
-				pAd->StaCfg.RsnCapability = pAd->ScanTab.BssEntry[BssIdx].WPA2.RsnCapability;
-			}
-
-			// Set Mix cipher flag
-			pAd->StaCfg.bMixCipher = (pAd->StaCfg.PairCipher == pAd->StaCfg.GroupCipher) ? FALSE : TRUE;
-			if (pAd->StaCfg.bMixCipher == TRUE)
-			{
-				// If mix cipher, re-build RSNIE
-				RTMPMakeRSNIE(pAd, pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus, 0);
-			}
-			// No active association, join the BSS immediately
-			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - joining %02x:%02x:%02x:%02x:%02x:%02x ...\n",
-				pOidBssid[0],pOidBssid[1],pOidBssid[2],pOidBssid[3],pOidBssid[4],pOidBssid[5]));
-
-			JoinParmFill(pAd, &JoinReq, pAd->MlmeAux.BssIdx);
-			MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_JOIN_REQ, sizeof(MLME_JOIN_REQ_STRUCT), &JoinReq);
-
-			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_JOIN;
-		}
-	}
-}
-
-// Roaming is the only external request triggering CNTL state machine
-// despite of other "SET OID" operation. All "SET OID" related oerations
-// happen in sequence, because no other SET OID will be sent to this device
-// until the the previous SET operation is complete (successful o failed).
-// So, how do we quarantee this ROAMING request won't corrupt other "SET OID"?
-// or been corrupted by other "SET OID"?
-//
-// IRQL = DISPATCH_LEVEL
-VOID CntlMlmeRoamingProc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	// TODO:
-	// AP in different channel may show lower RSSI than actual value??
-	// should we add a weighting factor to compensate it?
-	DBGPRINT(RT_DEBUG_TRACE,("CNTL - Roaming in MlmeAux.RoamTab...\n"));
-
-	NdisMoveMemory(&pAd->MlmeAux.SsidBssTab, &pAd->MlmeAux.RoamTab, sizeof(pAd->MlmeAux.RoamTab));
-	pAd->MlmeAux.SsidBssTab.BssNr = pAd->MlmeAux.RoamTab.BssNr;
-
-	BssTableSortByRssi(&pAd->MlmeAux.SsidBssTab);
-	pAd->MlmeAux.BssIdx = 0;
-	IterateOnBssTab(pAd);
-}
-
-#ifdef QOS_DLS_SUPPORT
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID CntlOidDLSSetupProc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	PRT_802_11_DLS		pDLS = (PRT_802_11_DLS)Elem->Msg;
-	MLME_DLS_REQ_STRUCT	MlmeDlsReq;
-	INT					i;
-	USHORT				reason = REASON_UNSPECIFY;
-
-	DBGPRINT(RT_DEBUG_TRACE,("CNTL - (OID set %02x:%02x:%02x:%02x:%02x:%02x with Valid=%d, Status=%d, TimeOut=%d, CountDownTimer=%d)\n",
-		pDLS->MacAddr[0], pDLS->MacAddr[1], pDLS->MacAddr[2], pDLS->MacAddr[3], pDLS->MacAddr[4], pDLS->MacAddr[5],
-		pDLS->Valid, pDLS->Status, pDLS->TimeOut, pDLS->CountDownTimer));
-
-	if (!pAd->CommonCfg.bDLSCapable)
-		return;
-
-	// DLS will not be supported when Adhoc mode
-	if (INFRA_ON(pAd))
-	{
-		for (i = 0; i < MAX_NUM_OF_DLS_ENTRY; i++)
-		{
-			if (pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH) &&
-				(pDLS->TimeOut == pAd->StaCfg.DLSEntry[i].TimeOut) && MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
-			{
-				// 1. Same setting, just drop it
-				DBGPRINT(RT_DEBUG_TRACE,("CNTL - setting unchanged\n"));
-				break;
-			}
-			else if (!pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH) &&
-				MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
-			{
-				// 2. Disable DLS link case, just tear down DLS link
-				reason = REASON_QOS_UNWANTED_MECHANISM;
-				pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-				pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-				DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-				MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-				DBGPRINT(RT_DEBUG_TRACE,("CNTL - start tear down procedure\n"));
-				break;
-			}
-			else if ((i < MAX_NUM_OF_DLS_ENTRY) && pDLS->Valid && !pAd->StaCfg.DLSEntry[i].Valid)
-			{
-				// 3. Enable case, start DLS setup procedure
-				NdisMoveMemory(&pAd->StaCfg.DLSEntry[i], pDLS, sizeof(RT_802_11_DLS_UI));
-
-				//Update countdown timer
-				pAd->StaCfg.DLSEntry[i].CountDownTimer = pAd->StaCfg.DLSEntry[i].TimeOut;
-				DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-				MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_REQ, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-				DBGPRINT(RT_DEBUG_TRACE,("CNTL - DLS setup case\n"));
-				break;
-			}
-			else if ((i < MAX_NUM_OF_DLS_ENTRY) && pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid &&
-				(pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH) && !MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
-			{
-				// 4. update mac case, tear down old DLS and setup new DLS
-				reason = REASON_QOS_UNWANTED_MECHANISM;
-				pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-				pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-				DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-				MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-				NdisMoveMemory(&pAd->StaCfg.DLSEntry[i], pDLS, sizeof(RT_802_11_DLS_UI));
-				DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-				MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_REQ, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-				DBGPRINT(RT_DEBUG_TRACE,("CNTL - DLS tear down and restart case\n"));
-				break;
-			}
-			else if (pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid &&
-				MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr) && (pAd->StaCfg.DLSEntry[i].TimeOut != pDLS->TimeOut))
-			{
-				// 5. update timeout case, start DLS setup procedure (no tear down)
-				pAd->StaCfg.DLSEntry[i].TimeOut	= pDLS->TimeOut;
-				//Update countdown timer
-				pAd->StaCfg.DLSEntry[i].CountDownTimer = pAd->StaCfg.DLSEntry[i].TimeOut;
-				DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-				MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_REQ, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-				DBGPRINT(RT_DEBUG_TRACE,("CNTL - DLS update timeout case\n"));
-				break;
-			}
-			else if (pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid &&
-				(pAd->StaCfg.DLSEntry[i].Status != DLS_FINISH) && MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
-			{
-				// 6. re-setup case, start DLS setup procedure (no tear down)
-				DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-				MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_REQ, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-				DBGPRINT(RT_DEBUG_TRACE,("CNTL - DLS retry setup procedure\n"));
-				break;
-			}
-			else
-			{
-				DBGPRINT(RT_DEBUG_WARN,("CNTL - DLS not changed in entry - %d - Valid=%d, Status=%d, TimeOut=%d\n",
-					i, pAd->StaCfg.DLSEntry[i].Valid, pAd->StaCfg.DLSEntry[i].Status, pAd->StaCfg.DLSEntry[i].TimeOut));
-			}
-		}
-	}
-}
-#endif // QOS_DLS_SUPPORT //
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID CntlWaitDisassocProc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	MLME_START_REQ_STRUCT     StartReq;
-
-	if (Elem->MsgType == MT2_DISASSOC_CONF)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Dis-associate successful\n"));
-
-	    if (pAd->CommonCfg.bWirelessEvent)
-		{
-			RTMPSendWirelessEvent(pAd, IW_DISASSOC_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-		}
-
-		LinkDown(pAd, FALSE);
-
-		// case 1. no matching BSS, and user wants ADHOC, so we just start a new one
-		if ((pAd->MlmeAux.SsidBssTab.BssNr==0) && (pAd->StaCfg.BssType == BSS_ADHOC))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - No matching BSS, start a new ADHOC (Ssid=%s)...\n",pAd->MlmeAux.Ssid));
-			StartParmFill(pAd, &StartReq, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen);
-			MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_START_REQ, sizeof(MLME_START_REQ_STRUCT), &StartReq);
-			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_START;
-		}
-		// case 2. try each matched BSS
-		else
-		{
-			pAd->MlmeAux.BssIdx = 0;
-
-			IterateOnBssTab(pAd);
-		}
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID CntlWaitJoinProc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT                      Reason;
-	MLME_AUTH_REQ_STRUCT        AuthReq;
-
-	if (Elem->MsgType == MT2_JOIN_CONF)
-	{
-		NdisMoveMemory(&Reason, Elem->Msg, sizeof(USHORT));
-		if (Reason == MLME_SUCCESS)
-		{
-			// 1. joined an IBSS, we are pretty much done here
-			if (pAd->MlmeAux.BssType == BSS_ADHOC)
-			{
-			    //
-				// 5G bands rules of Japan:
-				// Ad hoc must be disabled in W53(ch52,56,60,64) channels.
-				//
-				if ( (pAd->CommonCfg.bIEEE80211H == 1) &&
-                      RadarChannelCheck(pAd, pAd->CommonCfg.Channel)
-				   )
-				{
-					pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-					DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Channel=%d, Join adhoc on W53(52,56,60,64) Channels are not accepted\n", pAd->CommonCfg.Channel));
-					return;
-				}
-
-				LinkUp(pAd, BSS_ADHOC);
-				pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-				DBGPRINT(RT_DEBUG_TRACE, ("CNTL - join the IBSS = %02x:%02x:%02x:%02x:%02x:%02x ...\n",
-				pAd->CommonCfg.Bssid[0],pAd->CommonCfg.Bssid[1],pAd->CommonCfg.Bssid[2],
-				pAd->CommonCfg.Bssid[3],pAd->CommonCfg.Bssid[4],pAd->CommonCfg.Bssid[5]));
-
-                pAd->IndicateMediaState = NdisMediaStateConnected;
-                pAd->ExtraInfo = GENERAL_LINK_UP;
-			}
-			// 2. joined a new INFRA network, start from authentication
-			else
-			{
-#ifdef LEAP_SUPPORT
-				// Add AuthMode "LEAP" for CCX 1.X
-				if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-				{
-					AuthParmFill(pAd, &AuthReq, pAd->MlmeAux.Bssid, CISCO_AuthModeLEAP);
-				}
-				else
-#endif // LEAP_SUPPORT //
-				{
-					// either Ndis802_11AuthModeShared or Ndis802_11AuthModeAutoSwitch, try shared key first
-					if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeShared) ||
-						(pAd->StaCfg.AuthMode == Ndis802_11AuthModeAutoSwitch))
-					{
-						AuthParmFill(pAd, &AuthReq, pAd->MlmeAux.Bssid, Ndis802_11AuthModeShared);
-					}
-					else
-					{
-						AuthParmFill(pAd, &AuthReq, pAd->MlmeAux.Bssid, Ndis802_11AuthModeOpen);
-					}
-				}
-				MlmeEnqueue(pAd, AUTH_STATE_MACHINE, MT2_MLME_AUTH_REQ,
-							sizeof(MLME_AUTH_REQ_STRUCT), &AuthReq);
-
-				pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_AUTH;
-			}
-		}
-		else
-		{
-			// 3. failed, try next BSS
-			pAd->MlmeAux.BssIdx++;
-			IterateOnBssTab(pAd);
-		}
-	}
-}
-
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID CntlWaitStartProc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT      Result;
-
-	if (Elem->MsgType == MT2_START_CONF)
-	{
-		NdisMoveMemory(&Result, Elem->Msg, sizeof(USHORT));
-		if (Result == MLME_SUCCESS)
-		{
-		    //
-			// 5G bands rules of Japan:
-			// Ad hoc must be disabled in W53(ch52,56,60,64) channels.
-			//
-			if ( (pAd->CommonCfg.bIEEE80211H == 1) &&
-                  RadarChannelCheck(pAd, pAd->CommonCfg.Channel)
-			   )
-			{
-				pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-				DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Channel=%d, Start adhoc on W53(52,56,60,64) Channels are not accepted\n", pAd->CommonCfg.Channel));
-				return;
-			}
-#ifdef DOT11_N_SUPPORT
-			if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
-			{
-				N_ChannelCheck(pAd);
-				SetCommonHT(pAd);
-				NdisMoveMemory(&pAd->MlmeAux.AddHtInfo, &pAd->CommonCfg.AddHTInfo, sizeof(ADD_HT_INFO_IE));
-				RTMPCheckHt(pAd, BSSID_WCID, &pAd->CommonCfg.HtCapability, &pAd->CommonCfg.AddHTInfo);
-				pAd->StaActive.SupportedPhyInfo.bHtEnable = TRUE;
-				NdisZeroMemory(&pAd->StaActive.SupportedPhyInfo.MCSSet[0], 16);
-				NdisMoveMemory(&pAd->StaActive.SupportedPhyInfo.MCSSet[0], &pAd->CommonCfg.HtCapability.MCSSet[0], 16);
-				COPY_HTSETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(pAd);
-
-				if ((pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth  == BW_40) &&
-					(pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset == EXTCHA_ABOVE))
-				{
-					pAd->MlmeAux.CentralChannel = pAd->CommonCfg.Channel + 2;
-				}
-				else if ((pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth  == BW_40) &&
-						 (pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset == EXTCHA_BELOW))
-				{
-					pAd->MlmeAux.CentralChannel = pAd->CommonCfg.Channel - 2;
-				}
-			}
-			else
-#endif // DOT11_N_SUPPORT //
-			{
-				pAd->StaActive.SupportedPhyInfo.bHtEnable = FALSE;
-			}
-			LinkUp(pAd, BSS_ADHOC);
-			pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-			// Before send beacon, driver need do radar detection
-			if ((pAd->CommonCfg.Channel > 14 )
-				&& (pAd->CommonCfg.bIEEE80211H == 1)
-				&& RadarChannelCheck(pAd, pAd->CommonCfg.Channel))
-			{
-				pAd->CommonCfg.RadarDetect.RDMode = RD_SILENCE_MODE;
-				pAd->CommonCfg.RadarDetect.RDCount = 0;
-#ifdef DFS_SUPPORT
-				BbpRadarDetectionStart(pAd);
-#endif // DFS_SUPPORT //
-			}
-
-			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - start a new IBSS = %02x:%02x:%02x:%02x:%02x:%02x ...\n",
-				pAd->CommonCfg.Bssid[0],pAd->CommonCfg.Bssid[1],pAd->CommonCfg.Bssid[2],
-				pAd->CommonCfg.Bssid[3],pAd->CommonCfg.Bssid[4],pAd->CommonCfg.Bssid[5]));
-		}
-		else
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Start IBSS fail. BUG!!!!!\n"));
-			pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-		}
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID CntlWaitAuthProc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT                       Reason;
-	MLME_ASSOC_REQ_STRUCT        AssocReq;
-	MLME_AUTH_REQ_STRUCT         AuthReq;
-
-	if (Elem->MsgType == MT2_AUTH_CONF)
-	{
-		NdisMoveMemory(&Reason, Elem->Msg, sizeof(USHORT));
-		if (Reason == MLME_SUCCESS)
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - AUTH OK\n"));
-			AssocParmFill(pAd, &AssocReq, pAd->MlmeAux.Bssid, pAd->MlmeAux.CapabilityInfo,
-						  ASSOC_TIMEOUT, pAd->StaCfg.DefaultListenCount);
-
-#ifdef LEAP_SUPPORT
-			//
-			// Cisco Leap CCKM supported Re-association.
-			//
-			if (LEAP_CCKM_ON(pAd) && (pAd->StaCfg.CCKMLinkUpFlag == TRUE))
-			{
-				//if CCKM is turn on , that's mean Fast Reauthentication
-				//Use CCKM Reassociation instead of normal association for Fast Roaming.
-				MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_REASSOC_REQ,
-							sizeof(MLME_ASSOC_REQ_STRUCT), &AssocReq);
-
-				pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_REASSOC;
-			}
-			else
-#endif // LEAP_SUPPORT //
-			{
-				MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_ASSOC_REQ,
-							sizeof(MLME_ASSOC_REQ_STRUCT), &AssocReq);
-
-				pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_ASSOC;
-			}
-		}
-		else
-		{
-			// This fail may because of the AP already keep us in its MAC table without
-			// ageing-out. The previous authentication attempt must have let it remove us.
-			// so try Authentication again may help. For D-Link DWL-900AP+ compatibility.
-			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - AUTH FAIL, try again...\n"));
-#ifdef LEAP_SUPPORT
-			//Add AuthMode "LEAP" for CCX 1.X
-			if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-			{
-				AuthParmFill(pAd, &AuthReq, pAd->MlmeAux.Bssid, CISCO_AuthModeLEAP);
-			}
-			else
-#endif // LEAP_SUPPORT //
-			{
-				if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeShared) ||
-					(pAd->StaCfg.AuthMode == Ndis802_11AuthModeAutoSwitch))
-				{
-					// either Ndis802_11AuthModeShared or Ndis802_11AuthModeAutoSwitch, try shared key first
-					AuthParmFill(pAd, &AuthReq, pAd->MlmeAux.Bssid, Ndis802_11AuthModeShared);
-				}
-				else
-				{
-					AuthParmFill(pAd, &AuthReq, pAd->MlmeAux.Bssid, Ndis802_11AuthModeOpen);
-				}
-			}
-			MlmeEnqueue(pAd, AUTH_STATE_MACHINE, MT2_MLME_AUTH_REQ,
-						sizeof(MLME_AUTH_REQ_STRUCT), &AuthReq);
-
-			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_AUTH2;
-		}
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID CntlWaitAuthProc2(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT                       Reason;
-	MLME_ASSOC_REQ_STRUCT        AssocReq;
-	MLME_AUTH_REQ_STRUCT         AuthReq;
-
-	if (Elem->MsgType == MT2_AUTH_CONF)
-	{
-		NdisMoveMemory(&Reason, Elem->Msg, sizeof(USHORT));
-		if (Reason == MLME_SUCCESS)
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - AUTH OK\n"));
-			AssocParmFill(pAd, &AssocReq, pAd->MlmeAux.Bssid, pAd->MlmeAux.CapabilityInfo,
-						  ASSOC_TIMEOUT, pAd->StaCfg.DefaultListenCount);
-			MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_ASSOC_REQ,
-						sizeof(MLME_ASSOC_REQ_STRUCT), &AssocReq);
-
-			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_ASSOC;
-		}
-		else
-		{
-#ifdef LEAP_SUPPORT
-			// Process LEAP first, since it use different control variable
-			// We don't want to affect other poven operation
-			if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-			{
-				// LEAP Auth not success, try next BSS
-				DBGPRINT(RT_DEBUG_TRACE, ("CNTL - *LEAP* AUTH FAIL, give up; try next BSS\n"));
-				DBGPRINT(RT_DEBUG_TRACE, ("Total match BSSID [=%d]\n", pAd->MlmeAux.SsidBssTab.BssNr));
-				pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-				pAd->MlmeAux.BssIdx++;
-				IterateOnBssTab(pAd);
-			}
-			else
-#endif // LEAP_SUPPORT //
-			if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeAutoSwitch) &&
-				 (pAd->MlmeAux.Alg == Ndis802_11AuthModeShared))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("CNTL - AUTH FAIL, try OPEN system...\n"));
-				AuthParmFill(pAd, &AuthReq, pAd->MlmeAux.Bssid, Ndis802_11AuthModeOpen);
-				MlmeEnqueue(pAd, AUTH_STATE_MACHINE, MT2_MLME_AUTH_REQ,
-							sizeof(MLME_AUTH_REQ_STRUCT), &AuthReq);
-
-				pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_AUTH2;
-			}
-			else
-			{
-				// not success, try next BSS
-				DBGPRINT(RT_DEBUG_TRACE, ("CNTL - AUTH FAIL, give up; try next BSS\n"));
-				pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; //???????
-				pAd->MlmeAux.BssIdx++;
-				IterateOnBssTab(pAd);
-			}
-		}
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID CntlWaitAssocProc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT      Reason;
-
-	if (Elem->MsgType == MT2_ASSOC_CONF)
-	{
-		NdisMoveMemory(&Reason, Elem->Msg, sizeof(USHORT));
-		if (Reason == MLME_SUCCESS)
-		{
-			LinkUp(pAd, BSS_INFRA);
-			pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Association successful on BSS #%ld\n",pAd->MlmeAux.BssIdx));
-
-			if (pAd->CommonCfg.bWirelessEvent)
-			{
-				RTMPSendWirelessEvent(pAd, IW_ASSOC_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-			}
-		}
-		else
-		{
-			// not success, try next BSS
-			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Association fails on BSS #%ld\n",pAd->MlmeAux.BssIdx));
-			pAd->MlmeAux.BssIdx++;
-			IterateOnBssTab(pAd);
-		}
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID CntlWaitReassocProc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT      Result;
-
-	if (Elem->MsgType == MT2_REASSOC_CONF)
-	{
-		NdisMoveMemory(&Result, Elem->Msg, sizeof(USHORT));
-		if (Result == MLME_SUCCESS)
-		{
-			//
-			// NDIS requires a new Link UP indication but no Link Down for RE-ASSOC
-			//
-			LinkUp(pAd, BSS_INFRA);
-
-			// send wireless event - for association
-			if (pAd->CommonCfg.bWirelessEvent)
-				RTMPSendWirelessEvent(pAd, IW_ASSOC_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-
-
-#ifdef LEAP_SUPPORT
-			if (LEAP_CCKM_ON(pAd))
-			{
-				STA_PORT_SECURED(pAd);
-				pAd->StaCfg.WpaState = SS_FINISH;
-			}
-#endif // LEAP_SUPPORT //
-			pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Re-assocition successful on BSS #%ld\n", pAd->MlmeAux.RoamIdx));
-		}
-		else
-		{
-			// reassoc failed, try to pick next BSS in the BSS Table
-			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Re-assocition fails on BSS #%ld\n", pAd->MlmeAux.RoamIdx));
-			pAd->MlmeAux.RoamIdx++;
-			IterateOnBssTab2(pAd);
-		}
-	}
-}
-
-
-VOID	AdhocTurnOnQos(
-	IN  PRTMP_ADAPTER pAd)
-{
-#define AC0_DEF_TXOP		0
-#define AC1_DEF_TXOP		0
-#define AC2_DEF_TXOP		94
-#define AC3_DEF_TXOP		47
-
-	// Turn on QOs if use HT rate.
-	if (pAd->CommonCfg.APEdcaParm.bValid == FALSE)
-	{
-		pAd->CommonCfg.APEdcaParm.bValid = TRUE;
-		pAd->CommonCfg.APEdcaParm.Aifsn[0] = 3;
-		pAd->CommonCfg.APEdcaParm.Aifsn[1] = 7;
-		pAd->CommonCfg.APEdcaParm.Aifsn[2] = 1;
-		pAd->CommonCfg.APEdcaParm.Aifsn[3] = 1;
-
-		pAd->CommonCfg.APEdcaParm.Cwmin[0] = 4;
-		pAd->CommonCfg.APEdcaParm.Cwmin[1] = 4;
-		pAd->CommonCfg.APEdcaParm.Cwmin[2] = 3;
-		pAd->CommonCfg.APEdcaParm.Cwmin[3] = 2;
-
-		pAd->CommonCfg.APEdcaParm.Cwmax[0] = 10;
-		pAd->CommonCfg.APEdcaParm.Cwmax[1] = 6;
-		pAd->CommonCfg.APEdcaParm.Cwmax[2] = 4;
-		pAd->CommonCfg.APEdcaParm.Cwmax[3] = 3;
-
-		pAd->CommonCfg.APEdcaParm.Txop[0]  = 0;
-		pAd->CommonCfg.APEdcaParm.Txop[1]  = 0;
-		pAd->CommonCfg.APEdcaParm.Txop[2]  = AC2_DEF_TXOP;
-		pAd->CommonCfg.APEdcaParm.Txop[3]  = AC3_DEF_TXOP;
-	}
-	AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm);
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID LinkUp(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR BssType)
-{
-	ULONG	Now;
-	UINT32	Data;
-	BOOLEAN	Cancelled;
-	UCHAR	Value = 0, idx;
-	MAC_TABLE_ENTRY *pEntry = NULL, *pCurrEntry;
-
-	pEntry = &pAd->MacTab.Content[BSSID_WCID];
-
-	//
-	// ASSOC - DisassocTimeoutAction
-	// CNTL - Dis-associate successful
-	// !!! LINK DOWN !!!
-	// [88888] OID_802_11_SSID should have returned NDTEST_WEP_AP2(Returned: )
-	//
-	// To prevent DisassocTimeoutAction to call Link down after we link up,
-	// cancel the DisassocTimer no matter what it start or not.
-	//
-	RTMPCancelTimer(&pAd->MlmeAux.DisassocTimer,  &Cancelled);
-
-	COPY_SETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(pAd);
-
-#ifdef DOT11_N_SUPPORT
-	COPY_HTSETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(pAd);
-#endif // DOT11_N_SUPPORT //
-	// It's quite difficult to tell if a newly added KEY is WEP or CKIP until a new BSS
-	// is formed (either ASSOC/RE-ASSOC done or IBSS started. LinkUP should be a safe place
-	// to examine if cipher algorithm switching is required.
-	//rt2860b. Don't know why need this
-	SwitchBetweenWepAndCkip(pAd);
-
-
-	if (BssType == BSS_ADHOC)
-	{
-		OPSTATUS_SET_FLAG(pAd, fOP_STATUS_ADHOC_ON);
-		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_INFRA_ON);
-
-#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier
-		// No carrier detection when adhoc
-		// CarrierDetectionStop(pAd);
-		pAd->CommonCfg.CarrierDetect.CD_State = CD_NORMAL;
-#endif // CARRIER_DETECTION_SUPPORT //
-
-#ifdef DOT11_N_SUPPORT
-		if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
-			AdhocTurnOnQos(pAd);
-#endif // DOT11_N_SUPPORT //
-
-		DBGPRINT(RT_DEBUG_TRACE, ("!!!Adhoc LINK UP !!! \n" ));
-	}
-	else
-	{
-		OPSTATUS_SET_FLAG(pAd, fOP_STATUS_INFRA_ON);
-		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_ADHOC_ON);
-
-		DBGPRINT(RT_DEBUG_TRACE, ("!!!Infra LINK UP !!! \n" ));
-	}
-
-	// 3*3
-	// reset Tx beamforming bit
-	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &Value);
-	Value &= (~0x01);
-	Value |= pAd->CommonCfg.RegTransmitSetting.field.TxBF;
-	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value);
-
-#ifdef DOT11_N_SUPPORT
-	// Change to AP channel
-    if ((pAd->CommonCfg.CentralChannel > pAd->CommonCfg.Channel) && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40))
-	{
-		// Must using 40MHz.
-		pAd->CommonCfg.BBPCurrentBW = BW_40;
-		AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
-		AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
-
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &Value);
-		Value &= (~0x18);
-		Value |= 0x10;
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value);
-
-		//  RX : control channel at lower
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
-		Value &= (~0x20);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
-
-		RTMP_IO_READ32(pAd, TX_BAND_CFG, &Data);
-		Data &= 0xfffffffe;
-		RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Data);
-
-		if (pAd->MACVersion == 0x28600100)
-		{
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x1A);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x0A);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x16);
-            DBGPRINT(RT_DEBUG_TRACE, ("!!!rt2860C !!! \n" ));
-		}
-
-		DBGPRINT(RT_DEBUG_TRACE, ("!!!40MHz Lower LINK UP !!! Control Channel at Below. Central = %d \n", pAd->CommonCfg.CentralChannel ));
-	}
-	else if ((pAd->CommonCfg.CentralChannel < pAd->CommonCfg.Channel) && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40))
-    {
-	    // Must using 40MHz.
-		pAd->CommonCfg.BBPCurrentBW = BW_40;
-		AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
-	    AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
-
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &Value);
-		Value &= (~0x18);
-		Value |= 0x10;
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value);
-
-		RTMP_IO_READ32(pAd, TX_BAND_CFG, &Data);
-		Data |= 0x1;
-		RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Data);
-
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
-	    Value |= (0x20);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
-
-		if (pAd->MACVersion == 0x28600100)
-		{
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x1A);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x0A);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x16);
-			    DBGPRINT(RT_DEBUG_TRACE, ("!!!rt2860C !!! \n" ));
-		}
-
-	    DBGPRINT(RT_DEBUG_TRACE, ("!!! 40MHz Upper LINK UP !!! Control Channel at UpperCentral = %d \n", pAd->CommonCfg.CentralChannel ));
-    }
-    else
-#endif // DOT11_N_SUPPORT //
-    {
-	    pAd->CommonCfg.BBPCurrentBW = BW_20;
-		pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel;
-		AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
-		AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &Value);
-		Value &= (~0x18);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value);
-
-		RTMP_IO_READ32(pAd, TX_BAND_CFG, &Data);
-		Data &= 0xfffffffe;
-		RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Data);
-
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
-		Value &= (~0x20);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
-
-		if (pAd->MACVersion == 0x28600100)
-		{
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x16);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x08);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x11);
-            DBGPRINT(RT_DEBUG_TRACE, ("!!!rt2860C !!! \n" ));
-		}
-
-	    DBGPRINT(RT_DEBUG_TRACE, ("!!! 20MHz LINK UP !!! \n" ));
-    }
-
-	RTMPSetAGCInitValue(pAd, pAd->CommonCfg.BBPCurrentBW);
-	//
-	// Save BBP_R66 value, it will be used in RTUSBResumeMsduTransmission
-	//
-	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66, &pAd->BbpTuning.R66CurrentValue);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK UP !!! (BssType=%d, AID=%d, ssid=%s, Channel=%d, CentralChannel = %d)\n",
-		BssType, pAd->StaActive.Aid, pAd->CommonCfg.Ssid, pAd->CommonCfg.Channel, pAd->CommonCfg.CentralChannel));
-
-#ifdef DOT11_N_SUPPORT
-	DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK UP !!! (Density =%d, )\n", pAd->MacTab.Content[BSSID_WCID].MpduDensity));
-#endif // DOT11_N_SUPPORT //
-
-		AsicSetBssid(pAd, pAd->CommonCfg.Bssid);
-
-	AsicSetSlotTime(pAd, TRUE);
-	AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm);
-
-	// Call this for RTS protectionfor legacy rate, we will always enable RTS threshold, but normally it will not hit
-	AsicUpdateProtect(pAd, 0, (OFDMSETPROTECT | CCKSETPROTECT), TRUE, FALSE);
-
-#ifdef DOT11_N_SUPPORT
-	if ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE))
-	{
-		// Update HT protectionfor based on AP's operating mode.
-    	if (pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent == 1)
-    	{
-    		AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode,  ALLN_SETPROTECT, FALSE, TRUE);
-    	}
-    	else
-   			AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode,  ALLN_SETPROTECT, FALSE, FALSE);
-	}
-#endif // DOT11_N_SUPPORT //
-
-	NdisZeroMemory(&pAd->DrsCounters, sizeof(COUNTER_DRS));
-
-	NdisGetSystemUpTime(&Now);
-	pAd->StaCfg.LastBeaconRxTime = Now;   // last RX timestamp
-
-	if ((pAd->CommonCfg.TxPreamble != Rt802_11PreambleLong) &&
-		CAP_IS_SHORT_PREAMBLE_ON(pAd->StaActive.CapabilityInfo))
-	{
-		MlmeSetTxPreamble(pAd, Rt802_11PreambleShort);
-	}
-
-	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED);
-
-	if (pAd->CommonCfg.RadarDetect.RDMode == RD_SILENCE_MODE)
-	{
-#ifdef DFS_SUPPORT
-		RadarDetectionStop(pAd);
-#endif // DFS_SUPPORT //
-	}
-	pAd->CommonCfg.RadarDetect.RDMode = RD_NORMAL_MODE;
-
-	if (BssType == BSS_ADHOC)
-	{
-		MakeIbssBeacon(pAd);
-		if ((pAd->CommonCfg.Channel > 14)
-			&& (pAd->CommonCfg.bIEEE80211H == 1)
-			&& RadarChannelCheck(pAd, pAd->CommonCfg.Channel))
-		{
-			; //Do nothing
-		}
-		else
-		{
-			AsicEnableIbssSync(pAd);
-		}
-
-		// In ad hoc mode, use MAC table from index 1.
-		// p.s ASIC use all 0xff as termination of WCID table search.To prevent it's 0xff-ff-ff-ff-ff-ff, Write 0 here.
-		RTMP_IO_WRITE32(pAd, MAC_WCID_BASE, 0x00);
-		RTMP_IO_WRITE32(pAd, 0x1808, 0x00);
-
-		// If WEP is enabled, add key material and cipherAlg into Asic
-		// Fill in Shared Key Table(offset: 0x6c00) and Shared Key Mode(offset: 0x7000)
-
-		if (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled)
-		{
-			PUCHAR	Key;
-			UCHAR 	CipherAlg;
-
-			for (idx=0; idx < SHARE_KEY_NUM; idx++)
-        	{
-				CipherAlg = pAd->SharedKey[BSS0][idx].CipherAlg;
-    			Key = pAd->SharedKey[BSS0][idx].Key;
-
-				if (pAd->SharedKey[BSS0][idx].KeyLen > 0)
-				{
-					// Set key material and cipherAlg to Asic
-    				AsicAddSharedKeyEntry(pAd, BSS0, idx, CipherAlg, Key, NULL, NULL);
-
-                    if (idx == pAd->StaCfg.DefaultKeyId)
-					{
-						// Update WCID attribute table and IVEIV table for this group key table
-						RTMPAddWcidAttributeEntry(pAd, BSS0, idx, CipherAlg, NULL);
-					}
-				}
-
-
-			}
-		}
-		// If WPANone is enabled, add key material and cipherAlg into Asic
-		// Fill in Shared Key Table(offset: 0x6c00) and Shared Key Mode(offset: 0x7000)
-		else if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
-		{
-			pAd->StaCfg.DefaultKeyId = 0;	// always be zero
-
-            NdisZeroMemory(&pAd->SharedKey[BSS0][0], sizeof(CIPHER_KEY));
-							pAd->SharedKey[BSS0][0].KeyLen = LEN_TKIP_EK;
-			NdisMoveMemory(pAd->SharedKey[BSS0][0].Key, pAd->StaCfg.PMK, LEN_TKIP_EK);
-
-            if (pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled)
-            {
-    			NdisMoveMemory(pAd->SharedKey[BSS0][0].RxMic, &pAd->StaCfg.PMK[16], LEN_TKIP_RXMICK);
-    			NdisMoveMemory(pAd->SharedKey[BSS0][0].TxMic, &pAd->StaCfg.PMK[16], LEN_TKIP_TXMICK);
-            }
-
-			// Decide its ChiperAlg
-			if (pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled)
-				pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_TKIP;
-			else if (pAd->StaCfg.PairCipher == Ndis802_11Encryption3Enabled)
-				pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_AES;
-			else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Unknow Cipher (=%d), set Cipher to AES\n", pAd->StaCfg.PairCipher));
-				pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_AES;
-            }
-
-			// Set key material and cipherAlg to Asic
-			AsicAddSharedKeyEntry(pAd,
-								  BSS0,
-								  0,
-								  pAd->SharedKey[BSS0][0].CipherAlg,
-								  pAd->SharedKey[BSS0][0].Key,
-								  pAd->SharedKey[BSS0][0].TxMic,
-								  pAd->SharedKey[BSS0][0].RxMic);
-
-            // Update WCID attribute table and IVEIV table for this group key table
-			RTMPAddWcidAttributeEntry(pAd, BSS0, 0, pAd->SharedKey[BSS0][0].CipherAlg, NULL);
-
-		}
-
-	}
-	else // BSS_INFRA
-	{
-		// Check the new SSID with last SSID
-		while (Cancelled == TRUE)
-		{
-			if (pAd->CommonCfg.LastSsidLen == pAd->CommonCfg.SsidLen)
-			{
-				if (RTMPCompareMemory(pAd->CommonCfg.LastSsid, pAd->CommonCfg.Ssid, pAd->CommonCfg.LastSsidLen) == 0)
-				{
-					// Link to the old one no linkdown is required.
-					break;
-				}
-			}
-			// Send link down event before set to link up
-			pAd->IndicateMediaState = NdisMediaStateDisconnected;
-			RTMP_IndicateMediaState(pAd);
-            pAd->ExtraInfo = GENERAL_LINK_DOWN;
-			DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event AA!\n"));
-			break;
-		}
-
-		//
-		// On WPA mode, Remove All Keys if not connect to the last BSSID
-		// Key will be set after 4-way handshake.
-		//
-		if ((pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA))
-		{
-			ULONG 		IV;
-
-			// Remove all WPA keys
-			RTMPWPARemoveAllKeys(pAd);
-			pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-			pAd->StaCfg.PrivacyFilter = Ndis802_11PrivFilter8021xWEP;
-
-			// Fixed connection failed with Range Maximizer - 515 AP (Marvell Chip) when security is WPAPSK/TKIP
-			// If IV related values are too large in GroupMsg2, AP would ignore this message.
-			IV = 0;
-			IV |= (pAd->StaCfg.DefaultKeyId << 30);
-			AsicUpdateWCIDIVEIV(pAd, BSSID_WCID, IV, 0);
-		}
-		// NOTE:
-		// the decision of using "short slot time" or not may change dynamically due to
-		// new STA association to the AP. so we have to decide that upon parsing BEACON, not here
-
-		// NOTE:
-		// the decision to use "RTC/CTS" or "CTS-to-self" protection or not may change dynamically
-		// due to new STA association to the AP. so we have to decide that upon parsing BEACON, not here
-
-		ComposePsPoll(pAd);
-		ComposeNullFrame(pAd);
-
-			AsicEnableBssSync(pAd);
-
-		// Add BSSID to WCID search table
-		AsicUpdateRxWCIDTable(pAd, BSSID_WCID, pAd->CommonCfg.Bssid);
-
-		NdisAcquireSpinLock(&pAd->MacTabLock);
-		// add this BSSID entry into HASH table
-		{
-			UCHAR HashIdx;
-
-			//pEntry = &pAd->MacTab.Content[BSSID_WCID];
-			HashIdx = MAC_ADDR_HASH_INDEX(pAd->CommonCfg.Bssid);
-			if (pAd->MacTab.Hash[HashIdx] == NULL)
-			{
-				pAd->MacTab.Hash[HashIdx] = pEntry;
-			}
-			else
-			{
-				pCurrEntry = pAd->MacTab.Hash[HashIdx];
-				while (pCurrEntry->pNext != NULL)
-					pCurrEntry = pCurrEntry->pNext;
-				pCurrEntry->pNext = pEntry;
-			}
-		}
-		NdisReleaseSpinLock(&pAd->MacTabLock);
-
-
-		// If WEP is enabled, add paiewise and shared key
-#ifdef WPA_SUPPLICANT_SUPPORT
-        if (((pAd->StaCfg.WpaSupplicantUP)&&
-             (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled)&&
-             (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED)) ||
-            ((pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_DISABLE)&&
-              (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled)))
-#else
-		if (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled)
-#endif // WPA_SUPPLICANT_SUPPORT //
-		{
-			PUCHAR	Key;
-			UCHAR 	CipherAlg;
-
-			for (idx=0; idx < SHARE_KEY_NUM; idx++)
-        	{
-				CipherAlg = pAd->SharedKey[BSS0][idx].CipherAlg;
-    			Key = pAd->SharedKey[BSS0][idx].Key;
-
-				if (pAd->SharedKey[BSS0][idx].KeyLen > 0)
-				{
-					// Set key material and cipherAlg to Asic
-    				AsicAddSharedKeyEntry(pAd, BSS0, idx, CipherAlg, Key, NULL, NULL);
-
-					if (idx == pAd->StaCfg.DefaultKeyId)
-					{
-						// Assign group key info
-						RTMPAddWcidAttributeEntry(pAd, BSS0, idx, CipherAlg, NULL);
-
-						// Assign pairwise key info
-						RTMPAddWcidAttributeEntry(pAd, BSS0, idx, CipherAlg, pEntry);
-					}
-				}
-			}
-		}
-
-		// only INFRASTRUCTURE mode need to indicate connectivity immediately; ADHOC mode
-		// should wait until at least 2 active nodes in this BSSID.
-		OPSTATUS_SET_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
-
-        // For GUI ++
-		if (pAd->StaCfg.AuthMode < Ndis802_11AuthModeWPA)
-		{
-			pAd->IndicateMediaState = NdisMediaStateConnected;
-			pAd->ExtraInfo = GENERAL_LINK_UP;
-			RTMP_IndicateMediaState(pAd);
-		}
-        // --
-
-		// Add BSSID in my MAC Table.
-        NdisAcquireSpinLock(&pAd->MacTabLock);
-		RTMPMoveMemory(pAd->MacTab.Content[BSSID_WCID].Addr, pAd->CommonCfg.Bssid, MAC_ADDR_LEN);
-		pAd->MacTab.Content[BSSID_WCID].Aid = BSSID_WCID;
-		pAd->MacTab.Content[BSSID_WCID].pAd = pAd;
-		pAd->MacTab.Content[BSSID_WCID].ValidAsCLI = TRUE;	//Although this is bssid..still set ValidAsCl
-		pAd->MacTab.Size = 1;	// infra mode always set MACtab size =1.
-		pAd->MacTab.Content[BSSID_WCID].Sst = SST_ASSOC;
-		pAd->MacTab.Content[BSSID_WCID].AuthState = SST_ASSOC;
-		pAd->MacTab.Content[BSSID_WCID].WepStatus = pAd->StaCfg.WepStatus;
-        NdisReleaseSpinLock(&pAd->MacTabLock);
-
-		DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK UP !!!  ClientStatusFlags=%lx)\n",
-			pAd->MacTab.Content[BSSID_WCID].ClientStatusFlags));
-
-		MlmeUpdateTxRates(pAd, TRUE, BSS0);
-#ifdef DOT11_N_SUPPORT
-		MlmeUpdateHtTxRates(pAd, BSS0);
-		DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK UP !! (StaActive.bHtEnable =%d, )\n", pAd->StaActive.SupportedPhyInfo.bHtEnable));
-#endif // DOT11_N_SUPPORT //
-
-		//
-		// Report Adjacent AP report.
-		//
-#ifdef LEAP_SUPPORT
-		CCXAdjacentAPReport(pAd);
-#endif // LEAP_SUPPORT //
-
-		if (pAd->CommonCfg.bAggregationCapable)
-		{
-			if ((pAd->CommonCfg.bPiggyBackCapable) && (pAd->MlmeAux.APRalinkIe & 0x00000003) == 3)
-			{
-
-				OPSTATUS_SET_FLAG(pAd, fOP_STATUS_PIGGYBACK_INUSED);
-				OPSTATUS_SET_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED);
-                RTMPSetPiggyBack(pAd, TRUE);
-				DBGPRINT(RT_DEBUG_TRACE, ("Turn on Piggy-Back\n"));
-			}
-			else if (pAd->MlmeAux.APRalinkIe & 0x00000001)
-			{
-				OPSTATUS_SET_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED);
-			}
-		}
-
-		if (pAd->MlmeAux.APRalinkIe != 0x0)
-		{
-#ifdef DOT11_N_SUPPORT
-			if (CLIENT_STATUS_TEST_FLAG(&pAd->MacTab.Content[BSSID_WCID], fCLIENT_STATUS_RDG_CAPABLE))
-			{
-				AsicEnableRDG(pAd);
-			}
-#endif // DOT11_N_SUPPORT //
-			OPSTATUS_SET_FLAG(pAd, fCLIENT_STATUS_RALINK_CHIPSET);
-			CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[BSSID_WCID], fCLIENT_STATUS_RALINK_CHIPSET);
-		}
-		else
-		{
-			OPSTATUS_CLEAR_FLAG(pAd, fCLIENT_STATUS_RALINK_CHIPSET);
-			CLIENT_STATUS_CLEAR_FLAG(&pAd->MacTab.Content[BSSID_WCID], fCLIENT_STATUS_RALINK_CHIPSET);
-		}
-	}
-
-#ifdef DOT11_N_SUPPORT
-	DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_CONNECT Event B!.BACapability = %x. ClientStatusFlags = %lx\n", pAd->CommonCfg.BACapability.word, pAd->MacTab.Content[BSSID_WCID].ClientStatusFlags));
-#endif // DOT11_N_SUPPORT //
-
-	// Set LED
-	RTMPSetLED(pAd, LED_LINK_UP);
-
-	pAd->Mlme.PeriodicRound = 0;
-	pAd->Mlme.OneSecPeriodicRound = 0;
-	pAd->bConfigChanged = FALSE;        // Reset config flag
-	pAd->ExtraInfo = GENERAL_LINK_UP;   // Update extra information to link is up
-
-	// Set asic auto fall back
-	{
-		PUCHAR					pTable;
-		UCHAR					TableSize = 0;
-
-		MlmeSelectTxRateTable(pAd, &pAd->MacTab.Content[BSSID_WCID], &pTable, &TableSize, &pAd->CommonCfg.TxRateIndex);
-		AsicUpdateAutoFallBackTable(pAd, pTable);
-	}
-
-	NdisAcquireSpinLock(&pAd->MacTabLock);
-    pEntry->HTPhyMode.word = pAd->StaCfg.HTPhyMode.word;
-    pEntry->MaxHTPhyMode.word = pAd->StaCfg.HTPhyMode.word;
-	if (pAd->StaCfg.bAutoTxRateSwitch == FALSE)
-	{
-		pEntry->bAutoTxRateSwitch = FALSE;
-#ifdef DOT11_N_SUPPORT
-		if (pEntry->HTPhyMode.field.MCS == 32)
-			pEntry->HTPhyMode.field.ShortGI = GI_800;
-
-		if ((pEntry->HTPhyMode.field.MCS > MCS_7) || (pEntry->HTPhyMode.field.MCS == 32))
-			pEntry->HTPhyMode.field.STBC = STBC_NONE;
-#endif // DOT11_N_SUPPORT //
-		// If the legacy mode is set, overwrite the transmit setting of this entry.
-		if (pEntry->HTPhyMode.field.MODE <= MODE_OFDM)
-			RTMPUpdateLegacyTxSetting((UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode, pEntry);
-	}
-	else
-		pEntry->bAutoTxRateSwitch = TRUE;
-	NdisReleaseSpinLock(&pAd->MacTabLock);
-
-	//  Let Link Status Page display first initial rate.
-	pAd->LastTxRate = (USHORT)(pEntry->HTPhyMode.word);
-	// Select DAC according to HT or Legacy
-	if (pAd->StaActive.SupportedPhyInfo.MCSSet[0] != 0x00)
-	{
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &Value);
-		Value &= (~0x18);
-		if (pAd->Antenna.field.TxPath == 2)
-		{
-		    Value |= 0x10;
-		}
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, Value);
-	}
-	else
-	{
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &Value);
-		Value &= (~0x18);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, Value);
-	}
-
-#ifdef DOT11_N_SUPPORT
-	if (pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE)
-	{
-	}
-	else if (pEntry->MaxRAmpduFactor == 0)
-	{
-	    // If HT AP doesn't support MaxRAmpduFactor = 1, we need to set max PSDU to 0.
-	    // Because our Init value is 1 at MACRegTable.
-		RTMP_IO_WRITE32(pAd, MAX_LEN_CFG, 0x0fff);
-	}
-#endif // DOT11_N_SUPPORT //
-
-	// Patch for Marvel AP to gain high throughput
-	// Need to set as following,
-	// 1. Set txop in register-EDCA_AC0_CFG as 0x60
-	// 2. Set EnTXWriteBackDDONE in register-WPDMA_GLO_CFG as zero
-	// 3. PBF_MAX_PCNT as 0x1F3FBF9F
-	// 4. kick per two packets when dequeue
-	//
-	// Txop can only be modified when RDG is off, WMM is disable and TxBurst is enable
-	//
-	// if 1. Legacy AP WMM on,  or 2. 11n AP, AMPDU disable.  Force turn off burst no matter what bEnableTxBurst is.
-#ifdef DOT11_N_SUPPORT
-	if (((pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED)))
-		|| ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE) && (pAd->CommonCfg.BACapability.field.Policy == BA_NOTUSE)))
-	{
-		RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &Data);
-		Data  &= 0xFFFFFF00;
-		RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, Data);
-
-		RTMP_IO_WRITE32(pAd, PBF_MAX_PCNT, 0x1F3F7F9F);
-		DBGPRINT(RT_DEBUG_TRACE, ("Txburst 1\n"));
-	}
-	else
-#endif // DOT11_N_SUPPORT //
-	if (pAd->CommonCfg.bEnableTxBurst)
-	{
-		RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &Data);
-		Data  &= 0xFFFFFF00;
-		Data  |= 0x60;
-		RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, Data);
-		pAd->CommonCfg.IOTestParm.bNowAtherosBurstOn = TRUE;
-
-		RTMP_IO_WRITE32(pAd, PBF_MAX_PCNT, 0x1F3FBF9F);
-		DBGPRINT(RT_DEBUG_TRACE, ("Txburst 2\n"));
-	}
-	else
-	{
-		RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &Data);
-		Data  &= 0xFFFFFF00;
-		RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, Data);
-
-		RTMP_IO_WRITE32(pAd, PBF_MAX_PCNT, 0x1F3F7F9F);
-		DBGPRINT(RT_DEBUG_TRACE, ("Txburst 3\n"));
-	}
-
-#ifdef DOT11_N_SUPPORT
-	// Re-check to turn on TX burst or not.
-	if ((pAd->CommonCfg.IOTestParm.bLastAtheros == TRUE) && ((STA_WEP_ON(pAd))||(STA_TKIP_ON(pAd))))
-	{
-		pAd->CommonCfg.IOTestParm.bNextDisableRxBA = TRUE;
-		if (pAd->CommonCfg.bEnableTxBurst)
-		{
-		    UINT32 MACValue = 0;
-			// Force disable  TXOP value in this case. The same action in MLMEUpdateProtect too.
-			// I didn't change PBF_MAX_PCNT setting.
-			RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &MACValue);
-			MACValue  &= 0xFFFFFF00;
-			RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, MACValue);
-			pAd->CommonCfg.IOTestParm.bNowAtherosBurstOn = FALSE;
-		}
-	}
-	else
-	{
-		pAd->CommonCfg.IOTestParm.bNextDisableRxBA = FALSE;
-	}
-#endif // DOT11_N_SUPPORT //
-
-	pAd->CommonCfg.IOTestParm.bLastAtheros = FALSE;
-	COPY_MAC_ADDR(pAd->CommonCfg.LastBssid, pAd->CommonCfg.Bssid);
-	DBGPRINT(RT_DEBUG_TRACE, ("!!!pAd->bNextDisableRxBA= %d \n", pAd->CommonCfg.IOTestParm.bNextDisableRxBA));
-	// BSSID add in one MAC entry too.  Because in Tx, ASIC need to check Cipher and IV/EIV, BAbitmap
-	// Pther information in MACTab.Content[BSSID_WCID] is not necessary for driver.
-	// Note: As STA, The MACTab.Content[BSSID_WCID]. PairwiseKey and Shared Key for BSS0 are the same.
-
-    if (pAd->StaCfg.WepStatus <= Ndis802_11WEPDisabled)
-    {
-        pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-		pAd->StaCfg.PrivacyFilter = Ndis802_11PrivFilterAcceptAll;
-	}
-
-	NdisAcquireSpinLock(&pAd->MacTabLock);
-	pEntry->PortSecured = pAd->StaCfg.PortSecured;
-	NdisReleaseSpinLock(&pAd->MacTabLock);
-
-    //
-	// Patch Atheros AP TX will breakdown issue.
-	// AP Model: DLink DWL-8200AP
-	//
-	if (INFRA_ON(pAd) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) && STA_TKIP_ON(pAd))
-	{
-		RTMP_IO_WRITE32(pAd, RX_PARSER_CFG, 0x01);
-	}
-	else
-	{
-		RTMP_IO_WRITE32(pAd, RX_PARSER_CFG, 0x00);
-	}
-
-	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
-
-
-#ifdef DOT11_N_SUPPORT
-#ifdef DOT11N_DRAFT3
-	if ((pAd->CommonCfg.BACapability.field.b2040CoexistScanSup) && (pAd->CommonCfg.Channel <= 11))
-	{
-		OPSTATUS_SET_FLAG(pAd, fOP_STATUS_SCAN_2040);
-		BuildEffectedChannelList(pAd);
-	}
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
-}
-
-/*
-	==========================================================================
-
-	Routine	Description:
-		Disconnect current BSSID
-
-	Arguments:
-		pAd				- Pointer to our adapter
-		IsReqFromAP		- Request from AP
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-		We need more information to know it's this requst from AP.
-		If yes! we need to do extra handling, for example, remove the WPA key.
-		Otherwise on 4-way handshaking will faied, since the WPA key didn't be
-		remove while auto reconnect.
-		Disconnect request from AP, it means we will start afresh 4-way handshaking
-		on WPA mode.
-
-	==========================================================================
-*/
-VOID LinkDown(
-	IN PRTMP_ADAPTER pAd,
-	IN  BOOLEAN      IsReqFromAP)
-{
-	UCHAR			    i, ByteValue = 0;
-
-	// Do nothing if monitor mode is on
-	if (MONITOR_ON(pAd))
-		return;
-
-#ifdef RALINK_ATE
-	// Nothing to do in ATE mode.
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-    if (pAd->CommonCfg.bWirelessEvent)
-	{
-		RTMPSendWirelessEvent(pAd, IW_STA_LINKDOWN_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK DOWN !!!\n"));
-	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED);
-
-	if (ADHOC_ON(pAd))		// Adhoc mode link down
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK DOWN 1!!!\n"));
-
-		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_ADHOC_ON);
-		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
-		pAd->IndicateMediaState = NdisMediaStateDisconnected;
-		RTMP_IndicateMediaState(pAd);
-        pAd->ExtraInfo = GENERAL_LINK_DOWN;
-		BssTableDeleteEntry(&pAd->ScanTab, pAd->CommonCfg.Bssid, pAd->CommonCfg.Channel);
-		DBGPRINT(RT_DEBUG_TRACE, ("!!! MacTab.Size=%d !!!\n", pAd->MacTab.Size));
-	}
-	else					// Infra structure mode
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK DOWN 2!!!\n"));
-
-#ifdef QOS_DLS_SUPPORT
-		// DLS tear down frame must be sent before link down
-		// send DLS-TEAR_DOWN message
-		if (pAd->CommonCfg.bDLSCapable)
-		{
-			// tear down local dls table entry
-			for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-			{
-				if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
-				{
-					pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
-					RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
-				}
-			}
-
-			// tear down peer dls table entry
-			for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
-			{
-				if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status ==  DLS_FINISH))
-				{
-					pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
-					RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
-				}
-			}
-		}
-#endif // QOS_DLS_SUPPORT //
-
-		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_INFRA_ON);
-		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
-
-		// Saved last SSID for linkup comparison
-		pAd->CommonCfg.LastSsidLen = pAd->CommonCfg.SsidLen;
-		NdisMoveMemory(pAd->CommonCfg.LastSsid, pAd->CommonCfg.Ssid, pAd->CommonCfg.LastSsidLen);
-		COPY_MAC_ADDR(pAd->CommonCfg.LastBssid, pAd->CommonCfg.Bssid);
-		if (pAd->MlmeAux.CurrReqIsFromNdis == TRUE)
-		{
-			pAd->IndicateMediaState = NdisMediaStateDisconnected;
-			RTMP_IndicateMediaState(pAd);
-            pAd->ExtraInfo = GENERAL_LINK_DOWN;
-			DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event A!\n"));
-			pAd->MlmeAux.CurrReqIsFromNdis = FALSE;
-		}
-		else
-		{
-            //
-			// If disassociation request is from NDIS, then we don't need to delete BSSID from entry.
-			// Otherwise lost beacon or receive De-Authentication from AP,
-			// then we should delete BSSID from BssTable.
-			// If we don't delete from entry, roaming will fail.
-			//
-			BssTableDeleteEntry(&pAd->ScanTab, pAd->CommonCfg.Bssid, pAd->CommonCfg.Channel);
-		}
-
-		// restore back to -
-		//      1. long slot (20 us) or short slot (9 us) time
-		//      2. turn on/off RTS/CTS and/or CTS-to-self protection
-		//      3. short preamble
-		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_BG_PROTECTION_INUSED);
-
-		if (pAd->StaCfg.CCXAdjacentAPReportFlag == TRUE)
-		{
-			//
-			// Record current AP's information.
-			// for later used reporting Adjacent AP report.
-			//
-			pAd->StaCfg.CCXAdjacentAPChannel = pAd->CommonCfg.Channel;
-			pAd->StaCfg.CCXAdjacentAPSsidLen = pAd->CommonCfg.SsidLen;
-			NdisMoveMemory(pAd->StaCfg.CCXAdjacentAPSsid, pAd->CommonCfg.Ssid, pAd->StaCfg.CCXAdjacentAPSsidLen);
-			COPY_MAC_ADDR(pAd->StaCfg.CCXAdjacentAPBssid, pAd->CommonCfg.Bssid);
-		}
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-		// Country IE of the AP will be evaluated and will be used.
-		if (pAd->StaCfg.IEEE80211dClientMode != Rt802_11_D_None)
-		{
-			NdisMoveMemory(&pAd->CommonCfg.CountryCode[0], &pAd->StaCfg.StaOriCountryCode[0], 2);
-			pAd->CommonCfg.Geography = pAd->StaCfg.StaOriGeography;
-			BuildChannelListEx(pAd);
-		}
-#endif // EXT_BUILD_CHANNEL_LIST //
-
-	}
-
-	for (i=1; i<MAX_LEN_OF_MAC_TABLE; i++)
-	{
-		if (pAd->MacTab.Content[i].ValidAsCLI == TRUE)
-			MacTableDeleteEntry(pAd, pAd->MacTab.Content[i].Aid, pAd->MacTab.Content[i].Addr);
-	}
-
-	pAd->StaCfg.CCXQosECWMin	= 4;
-	pAd->StaCfg.CCXQosECWMax	= 10;
-
-	AsicSetSlotTime(pAd, TRUE); //FALSE);
-	AsicSetEdcaParm(pAd, NULL);
-
-	// Set LED
-	RTMPSetLED(pAd, LED_LINK_DOWN);
-    pAd->LedIndicatorStregth = 0xF0;
-    RTMPSetSignalLED(pAd, -100);	// Force signal strength Led to be turned off, firmware is not done it.
-
-		AsicDisableSync(pAd);
-
-	pAd->Mlme.PeriodicRound = 0;
-	pAd->Mlme.OneSecPeriodicRound = 0;
-
-	if (pAd->StaCfg.BssType == BSS_INFRA)
-	{
-		// Remove StaCfg Information after link down
-		NdisZeroMemory(pAd->CommonCfg.Bssid, MAC_ADDR_LEN);
-		NdisZeroMemory(pAd->CommonCfg.Ssid, MAX_LEN_OF_SSID);
-		pAd->CommonCfg.SsidLen = 0;
-	}
-#ifdef DOT11_N_SUPPORT
-	NdisZeroMemory(&pAd->MlmeAux.HtCapability, sizeof(HT_CAPABILITY_IE));
-	NdisZeroMemory(&pAd->MlmeAux.AddHtInfo, sizeof(ADD_HT_INFO_IE));
-	pAd->MlmeAux.HtCapabilityLen = 0;
-	pAd->MlmeAux.NewExtChannelOffset = 0xff;
-#endif // DOT11_N_SUPPORT //
-
-	// Reset WPA-PSK state. Only reset when supplicant enabled
-	if (pAd->StaCfg.WpaState != SS_NOTUSE)
-	{
-		pAd->StaCfg.WpaState = SS_START;
-		// Clear Replay counter
-		NdisZeroMemory(pAd->StaCfg.ReplayCounter, 8);
-
-#ifdef QOS_DLS_SUPPORT
-		if (pAd->CommonCfg.bDLSCapable)
-			NdisZeroMemory(pAd->StaCfg.DlsReplayCounter, 8);
-#endif // QOS_DLS_SUPPORT //
-	}
-
-
-	//
-	// if link down come from AP, we need to remove all WPA keys on WPA mode.
-	// otherwise will cause 4-way handshaking failed, since the WPA key not empty.
-	//
-	if ((IsReqFromAP) && (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA))
-	{
-		// Remove all WPA keys
-		RTMPWPARemoveAllKeys(pAd);
-	}
-
-	// 802.1x port control
-#ifdef WPA_SUPPLICANT_SUPPORT
-	// Prevent clear PortSecured here with static WEP
-	// NetworkManger set security policy first then set SSID to connect AP.
-	if (pAd->StaCfg.WpaSupplicantUP &&
-		(pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled) &&
-		(pAd->StaCfg.IEEE8021X == FALSE))
-	{
-		pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-	}
-	else
-#endif // WPA_SUPPLICANT_SUPPORT //
-	{
-		pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-		pAd->StaCfg.PrivacyFilter = Ndis802_11PrivFilter8021xWEP;
-	}
-
-	NdisAcquireSpinLock(&pAd->MacTabLock);
-	pAd->MacTab.Content[BSSID_WCID].PortSecured = pAd->StaCfg.PortSecured;
-	NdisReleaseSpinLock(&pAd->MacTabLock);
-
-	pAd->StaCfg.MicErrCnt = 0;
-
-	// Turn off Ckip control flag
-	pAd->StaCfg.bCkipOn = FALSE;
-	pAd->StaCfg.CCXEnable = FALSE;
-
-    pAd->IndicateMediaState = NdisMediaStateDisconnected;
-	// Update extra information to link is up
-	pAd->ExtraInfo = GENERAL_LINK_DOWN;
-
-    //pAd->StaCfg.AdhocBOnlyJoined = FALSE;
-	//pAd->StaCfg.AdhocBGJoined = FALSE;
-	//pAd->StaCfg.Adhoc20NJoined = FALSE;
-    pAd->StaActive.SupportedPhyInfo.bHtEnable = FALSE;
-
-	// Reset the Current AP's IP address
-	NdisZeroMemory(pAd->StaCfg.AironetIPAddress, 4);
-#ifdef RT2870
-	pAd->bUsbTxBulkAggre = FALSE;
-#endif // RT2870 //
-
-	// Clean association information
-	NdisZeroMemory(&pAd->StaCfg.AssocInfo, sizeof(NDIS_802_11_ASSOCIATION_INFORMATION));
-	pAd->StaCfg.AssocInfo.Length = sizeof(NDIS_802_11_ASSOCIATION_INFORMATION);
-	pAd->StaCfg.ReqVarIELen = 0;
-	pAd->StaCfg.ResVarIELen = 0;
-
-	//
-	// Reset RSSI value after link down
-	//
-	pAd->StaCfg.RssiSample.AvgRssi0 = 0;
-	pAd->StaCfg.RssiSample.AvgRssi0X8 = 0;
-	pAd->StaCfg.RssiSample.AvgRssi1 = 0;
-	pAd->StaCfg.RssiSample.AvgRssi1X8 = 0;
-	pAd->StaCfg.RssiSample.AvgRssi2 = 0;
-	pAd->StaCfg.RssiSample.AvgRssi2X8 = 0;
-
-	// Restore MlmeRate
-	pAd->CommonCfg.MlmeRate = pAd->CommonCfg.BasicMlmeRate;
-	pAd->CommonCfg.RtsRate = pAd->CommonCfg.BasicMlmeRate;
-
-#ifdef DOT11_N_SUPPORT
-	//
-	// After Link down, reset piggy-back setting in ASIC. Disable RDG.
-	//
-	if (pAd->CommonCfg.BBPCurrentBW == BW_40)
-	{
-		pAd->CommonCfg.BBPCurrentBW = BW_20;
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &ByteValue);
-		ByteValue &= (~0x18);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, ByteValue);
-	}
-#endif // DOT11_N_SUPPORT //
-	// Reset DAC
-	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &ByteValue);
-	ByteValue &= (~0x18);
-	if (pAd->Antenna.field.TxPath == 2)
-	{
-		ByteValue |= 0x10;
-	}
-	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, ByteValue);
-
-	RTMPSetPiggyBack(pAd,FALSE);
-	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_PIGGYBACK_INUSED);
-
-#ifdef DOT11_N_SUPPORT
-	pAd->CommonCfg.BACapability.word = pAd->CommonCfg.REGBACapability.word;
-#endif // DOT11_N_SUPPORT //
-
-	// Restore all settings in the following.
-	AsicUpdateProtect(pAd, 0, (ALLN_SETPROTECT|CCKSETPROTECT|OFDMSETPROTECT), TRUE, FALSE);
-	AsicDisableRDG(pAd);
-	pAd->CommonCfg.IOTestParm.bCurrentAtheros = FALSE;
-	pAd->CommonCfg.IOTestParm.bNowAtherosBurstOn = FALSE;
-
-#ifdef DOT11_N_SUPPORT
-#ifdef DOT11N_DRAFT3
-	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SCAN_2040);
-	pAd->CommonCfg.BSSCoexist2040.word = 0;
-	TriEventInit(pAd);
-	for (i = 0; i < (pAd->ChannelListNum - 1); i++)
-	{
-		pAd->ChannelList[i].bEffectedChannel = FALSE;
-	}
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
-
-	RTMP_IO_WRITE32(pAd, MAX_LEN_CFG, 0x1fff);
-	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-	if (pAd->StaCfg.WpaSupplicantUP) {
-		union iwreq_data    wrqu;
-		//send disassociate event to wpa_supplicant
-		memset(&wrqu, 0, sizeof(wrqu));
-		wrqu.data.flags = RT_DISASSOC_EVENT_FLAG;
-		wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL);
-	}
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-	{
-		union iwreq_data    wrqu;
-		memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN);
-		wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
-	}
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID IterateOnBssTab(
-	IN PRTMP_ADAPTER pAd)
-{
-	MLME_START_REQ_STRUCT   StartReq;
-	MLME_JOIN_REQ_STRUCT    JoinReq;
-	ULONG                   BssIdx;
-
-	// Change the wepstatus to original wepstatus
-	pAd->StaCfg.WepStatus   = pAd->StaCfg.OrigWepStatus;
-	pAd->StaCfg.PairCipher  = pAd->StaCfg.OrigWepStatus;
-	pAd->StaCfg.GroupCipher = pAd->StaCfg.OrigWepStatus;
-
-	BssIdx = pAd->MlmeAux.BssIdx;
-	if (BssIdx < pAd->MlmeAux.SsidBssTab.BssNr)
-	{
-		// Check cipher suite, AP must have more secured cipher than station setting
-		// Set the Pairwise and Group cipher to match the intended AP setting
-		// We can only connect to AP with less secured cipher setting
-		if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK))
-		{
-			pAd->StaCfg.GroupCipher = pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA.GroupCipher;
-
-			if (pAd->StaCfg.WepStatus == pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA.PairCipher)
-				pAd->StaCfg.PairCipher = pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA.PairCipher;
-			else if (pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA.PairCipherAux != Ndis802_11WEPDisabled)
-				pAd->StaCfg.PairCipher = pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA.PairCipherAux;
-			else	// There is no PairCipher Aux, downgrade our capability to TKIP
-				pAd->StaCfg.PairCipher = Ndis802_11Encryption2Enabled;
-		}
-		else if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK))
-		{
-			pAd->StaCfg.GroupCipher = pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA2.GroupCipher;
-
-			if (pAd->StaCfg.WepStatus == pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA2.PairCipher)
-				pAd->StaCfg.PairCipher = pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA2.PairCipher;
-			else if (pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA2.PairCipherAux != Ndis802_11WEPDisabled)
-				pAd->StaCfg.PairCipher = pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA2.PairCipherAux;
-			else	// There is no PairCipher Aux, downgrade our capability to TKIP
-				pAd->StaCfg.PairCipher = Ndis802_11Encryption2Enabled;
-
-			// RSN capability
-			pAd->StaCfg.RsnCapability = pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA2.RsnCapability;
-		}
-
-		// Set Mix cipher flag
-		pAd->StaCfg.bMixCipher = (pAd->StaCfg.PairCipher == pAd->StaCfg.GroupCipher) ? FALSE : TRUE;
-		if (pAd->StaCfg.bMixCipher == TRUE)
-		{
-			// If mix cipher, re-build RSNIE
-			RTMPMakeRSNIE(pAd, pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus, 0);
-		}
-
-		DBGPRINT(RT_DEBUG_TRACE, ("CNTL - iterate BSS %ld of %d\n", BssIdx, pAd->MlmeAux.SsidBssTab.BssNr));
-		JoinParmFill(pAd, &JoinReq, BssIdx);
-		MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_JOIN_REQ, sizeof(MLME_JOIN_REQ_STRUCT),
-					&JoinReq);
-		pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_JOIN;
-	}
-	else if (pAd->StaCfg.BssType == BSS_ADHOC)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("CNTL - All BSS fail; start a new ADHOC (Ssid=%s)...\n",pAd->MlmeAux.Ssid));
-		StartParmFill(pAd, &StartReq, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen);
-		MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_START_REQ, sizeof(MLME_START_REQ_STRUCT), &StartReq);
-		pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_START;
-	}
-	else // no more BSS
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("CNTL - All roaming failed, stay @ ch #%d\n", pAd->CommonCfg.Channel));
-		AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
-		AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-		pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-	}
-}
-
-// for re-association only
-// IRQL = DISPATCH_LEVEL
-VOID IterateOnBssTab2(
-	IN PRTMP_ADAPTER pAd)
-{
-	MLME_REASSOC_REQ_STRUCT ReassocReq;
-	ULONG                   BssIdx;
-	BSS_ENTRY               *pBss;
-
-	BssIdx = pAd->MlmeAux.RoamIdx;
-	pBss = &pAd->MlmeAux.RoamTab.BssEntry[BssIdx];
-
-	if (BssIdx < pAd->MlmeAux.RoamTab.BssNr)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("CNTL - iterate BSS %ld of %d\n", BssIdx, pAd->MlmeAux.RoamTab.BssNr));
-
-		AsicSwitchChannel(pAd, pBss->Channel, FALSE);
-		AsicLockChannel(pAd, pBss->Channel);
-
-		// reassociate message has the same structure as associate message
-		AssocParmFill(pAd, &ReassocReq, pBss->Bssid, pBss->CapabilityInfo,
-					  ASSOC_TIMEOUT, pAd->StaCfg.DefaultListenCount);
-		MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_REASSOC_REQ,
-					sizeof(MLME_REASSOC_REQ_STRUCT), &ReassocReq);
-
-		pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_REASSOC;
-	}
-	else // no more BSS
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("CNTL - All fast roaming failed, back to ch #%d\n",pAd->CommonCfg.Channel));
-		AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
-		AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-		pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID JoinParmFill(
-	IN PRTMP_ADAPTER pAd,
-	IN OUT MLME_JOIN_REQ_STRUCT *JoinReq,
-	IN ULONG BssIdx)
-{
-	JoinReq->BssIdx = BssIdx;
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID ScanParmFill(
-	IN PRTMP_ADAPTER pAd,
-	IN OUT MLME_SCAN_REQ_STRUCT *ScanReq,
-	IN CHAR Ssid[],
-	IN UCHAR SsidLen,
-	IN UCHAR BssType,
-	IN UCHAR ScanType)
-{
-    NdisZeroMemory(ScanReq->Ssid, MAX_LEN_OF_SSID);
-	ScanReq->SsidLen = SsidLen;
-	NdisMoveMemory(ScanReq->Ssid, Ssid, SsidLen);
-	ScanReq->BssType = BssType;
-	ScanReq->ScanType = ScanType;
-}
-
-#ifdef QOS_DLS_SUPPORT
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID DlsParmFill(
-	IN PRTMP_ADAPTER pAd,
-	IN OUT MLME_DLS_REQ_STRUCT *pDlsReq,
-	IN PRT_802_11_DLS pDls,
-	IN USHORT reason)
-{
-	pDlsReq->pDLS = pDls;
-	pDlsReq->Reason = reason;
-}
-#endif // QOS_DLS_SUPPORT //
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID StartParmFill(
-	IN PRTMP_ADAPTER pAd,
-	IN OUT MLME_START_REQ_STRUCT *StartReq,
-	IN CHAR Ssid[],
-	IN UCHAR SsidLen)
-{
-	ASSERT(SsidLen <= MAX_LEN_OF_SSID);
-	NdisMoveMemory(StartReq->Ssid, Ssid, SsidLen);
-	StartReq->SsidLen = SsidLen;
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID AuthParmFill(
-	IN PRTMP_ADAPTER pAd,
-	IN OUT MLME_AUTH_REQ_STRUCT *AuthReq,
-	IN PUCHAR pAddr,
-	IN USHORT Alg)
-{
-	COPY_MAC_ADDR(AuthReq->Addr, pAddr);
-	AuthReq->Alg = Alg;
-	AuthReq->Timeout = AUTH_TIMEOUT;
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-
-
-#ifdef RT2870
-
-VOID MlmeCntlConfirm(
-	IN PRTMP_ADAPTER pAd,
-	IN ULONG MsgType,
-	IN USHORT Msg)
-{
-	MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MsgType, sizeof(USHORT), &Msg);
-}
-
-VOID ComposePsPoll(
-	IN PRTMP_ADAPTER pAd)
-{
-	PTXINFO_STRUC		pTxInfo;
-	PTXWI_STRUC		pTxWI;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("ComposePsPoll\n"));
-	NdisZeroMemory(&pAd->PsPollFrame, sizeof(PSPOLL_FRAME));
-
-	pAd->PsPollFrame.FC.PwrMgmt = 0;
-	pAd->PsPollFrame.FC.Type = BTYPE_CNTL;
-	pAd->PsPollFrame.FC.SubType = SUBTYPE_PS_POLL;
-	pAd->PsPollFrame.Aid = pAd->StaActive.Aid | 0xC000;
-	COPY_MAC_ADDR(pAd->PsPollFrame.Bssid, pAd->CommonCfg.Bssid);
-	COPY_MAC_ADDR(pAd->PsPollFrame.Ta, pAd->CurrentAddress);
-
-	RTMPZeroMemory(&pAd->PsPollContext.TransferBuffer->field.WirelessPacket[0], 100);
-	pTxInfo = (PTXINFO_STRUC)&pAd->PsPollContext.TransferBuffer->field.WirelessPacket[0];
-	RTMPWriteTxInfo(pAd, pTxInfo, (USHORT)(sizeof(PSPOLL_FRAME)+TXWI_SIZE), TRUE, EpToQueue[MGMTPIPEIDX], FALSE,  FALSE);
-	pTxWI = (PTXWI_STRUC)&pAd->PsPollContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE];
-	RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE, TRUE, FALSE, 0, BSSID_WCID, (sizeof(PSPOLL_FRAME)),
-		0,  0, (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_BACKOFF, FALSE, &pAd->CommonCfg.MlmeTransmit);
-	RTMPMoveMemory(&pAd->PsPollContext.TransferBuffer->field.WirelessPacket[TXWI_SIZE+TXINFO_SIZE], &pAd->PsPollFrame, sizeof(PSPOLL_FRAME));
-	// Append 4 extra zero bytes.
-	pAd->PsPollContext.BulkOutSize =  TXINFO_SIZE + TXWI_SIZE + sizeof(PSPOLL_FRAME) + 4;
-}
-
-// IRQL = DISPATCH_LEVEL
-VOID ComposeNullFrame(
-	IN PRTMP_ADAPTER pAd)
-{
-	PTXINFO_STRUC		pTxInfo;
-	PTXWI_STRUC		pTxWI;
-
-	NdisZeroMemory(&pAd->NullFrame, sizeof(HEADER_802_11));
-	pAd->NullFrame.FC.Type = BTYPE_DATA;
-	pAd->NullFrame.FC.SubType = SUBTYPE_NULL_FUNC;
-	pAd->NullFrame.FC.ToDs = 1;
-	COPY_MAC_ADDR(pAd->NullFrame.Addr1, pAd->CommonCfg.Bssid);
-	COPY_MAC_ADDR(pAd->NullFrame.Addr2, pAd->CurrentAddress);
-	COPY_MAC_ADDR(pAd->NullFrame.Addr3, pAd->CommonCfg.Bssid);
-	RTMPZeroMemory(&pAd->NullContext.TransferBuffer->field.WirelessPacket[0], 100);
-	pTxInfo = (PTXINFO_STRUC)&pAd->NullContext.TransferBuffer->field.WirelessPacket[0];
-	RTMPWriteTxInfo(pAd, pTxInfo, (USHORT)(sizeof(HEADER_802_11)+TXWI_SIZE), TRUE, EpToQueue[MGMTPIPEIDX], FALSE,  FALSE);
-	pTxWI = (PTXWI_STRUC)&pAd->NullContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE];
-	RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE, TRUE, FALSE, 0, BSSID_WCID, (sizeof(HEADER_802_11)),
-		0, 0, (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_BACKOFF, FALSE, &pAd->CommonCfg.MlmeTransmit);
-	RTMPMoveMemory(&pAd->NullContext.TransferBuffer->field.WirelessPacket[TXWI_SIZE+TXINFO_SIZE], &pAd->NullFrame, sizeof(HEADER_802_11));
-	pAd->NullContext.BulkOutSize =  TXINFO_SIZE + TXWI_SIZE + sizeof(pAd->NullFrame) + 4;
-}
-#endif // RT2870 //
-
-
-/*
-	==========================================================================
-	Description:
-		Pre-build a BEACON frame in the shared memory
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-ULONG MakeIbssBeacon(
-	IN PRTMP_ADAPTER pAd)
-{
-	UCHAR         DsLen = 1, IbssLen = 2;
-	UCHAR         LocalErpIe[3] = {IE_ERP, 1, 0x04};
-	HEADER_802_11 BcnHdr;
-	USHORT        CapabilityInfo;
-	LARGE_INTEGER FakeTimestamp;
-	ULONG         FrameLen = 0;
-	PTXWI_STRUC	  pTxWI = &pAd->BeaconTxWI;
-	CHAR         *pBeaconFrame = pAd->BeaconBuf;
-	BOOLEAN       Privacy;
-	UCHAR         SupRate[MAX_LEN_OF_SUPPORTED_RATES];
-	UCHAR         SupRateLen = 0;
-	UCHAR         ExtRate[MAX_LEN_OF_SUPPORTED_RATES];
-	UCHAR         ExtRateLen = 0;
-	UCHAR         RSNIe = IE_WPA;
-
-	if ((pAd->CommonCfg.PhyMode == PHY_11B) && (pAd->CommonCfg.Channel <= 14))
-	{
-		SupRate[0] = 0x82; // 1 mbps
-		SupRate[1] = 0x84; // 2 mbps
-		SupRate[2] = 0x8b; // 5.5 mbps
-		SupRate[3] = 0x96; // 11 mbps
-		SupRateLen = 4;
-		ExtRateLen = 0;
-	}
-	else if (pAd->CommonCfg.Channel > 14)
-	{
-		SupRate[0]  = 0x8C;    // 6 mbps, in units of 0.5 Mbps, basic rate
-		SupRate[1]  = 0x12;    // 9 mbps, in units of 0.5 Mbps
-		SupRate[2]  = 0x98;    // 12 mbps, in units of 0.5 Mbps, basic rate
-		SupRate[3]  = 0x24;    // 18 mbps, in units of 0.5 Mbps
-		SupRate[4]  = 0xb0;    // 24 mbps, in units of 0.5 Mbps, basic rate
-		SupRate[5]  = 0x48;    // 36 mbps, in units of 0.5 Mbps
-		SupRate[6]  = 0x60;    // 48 mbps, in units of 0.5 Mbps
-		SupRate[7]  = 0x6c;    // 54 mbps, in units of 0.5 Mbps
-		SupRateLen  = 8;
-		ExtRateLen  = 0;
-
-		//
-		// Also Update MlmeRate & RtsRate for G only & A only
-		//
-		pAd->CommonCfg.MlmeRate = RATE_6;
-		pAd->CommonCfg.RtsRate = RATE_6;
-		pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM;
-		pAd->CommonCfg.MlmeTransmit.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate];
-		pAd->MacTab.Content[BSS0Mcast_WCID].HTPhyMode.field.MODE = MODE_OFDM;
-		pAd->MacTab.Content[BSS0Mcast_WCID].HTPhyMode.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate];
-	}
-	else
-	{
-		SupRate[0] = 0x82; // 1 mbps
-		SupRate[1] = 0x84; // 2 mbps
-		SupRate[2] = 0x8b; // 5.5 mbps
-		SupRate[3] = 0x96; // 11 mbps
-		SupRateLen = 4;
-
-		ExtRate[0]  = 0x0C;    // 6 mbps, in units of 0.5 Mbps,
-		ExtRate[1]  = 0x12;    // 9 mbps, in units of 0.5 Mbps
-		ExtRate[2]  = 0x18;    // 12 mbps, in units of 0.5 Mbps,
-		ExtRate[3]  = 0x24;    // 18 mbps, in units of 0.5 Mbps
-		ExtRate[4]  = 0x30;    // 24 mbps, in units of 0.5 Mbps,
-		ExtRate[5]  = 0x48;    // 36 mbps, in units of 0.5 Mbps
-		ExtRate[6]  = 0x60;    // 48 mbps, in units of 0.5 Mbps
-		ExtRate[7]  = 0x6c;    // 54 mbps, in units of 0.5 Mbps
-		ExtRateLen  = 8;
-	}
-
-	pAd->StaActive.SupRateLen = SupRateLen;
-	NdisMoveMemory(pAd->StaActive.SupRate, SupRate, SupRateLen);
-	pAd->StaActive.ExtRateLen = ExtRateLen;
-	NdisMoveMemory(pAd->StaActive.ExtRate, ExtRate, ExtRateLen);
-
-	// compose IBSS beacon frame
-	MgtMacHeaderInit(pAd, &BcnHdr, SUBTYPE_BEACON, 0, BROADCAST_ADDR, pAd->CommonCfg.Bssid);
-	Privacy = (pAd->StaCfg.WepStatus == Ndis802_11Encryption1Enabled) ||
-			  (pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled) ||
-			  (pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled);
-	CapabilityInfo = CAP_GENERATE(0, 1, Privacy, (pAd->CommonCfg.TxPreamble == Rt802_11PreambleShort), 0, 0);
-
-	MakeOutgoingFrame(pBeaconFrame,                &FrameLen,
-					  sizeof(HEADER_802_11),           &BcnHdr,
-					  TIMESTAMP_LEN,                   &FakeTimestamp,
-					  2,                               &pAd->CommonCfg.BeaconPeriod,
-					  2,                               &CapabilityInfo,
-					  1,                               &SsidIe,
-					  1,                               &pAd->CommonCfg.SsidLen,
-					  pAd->CommonCfg.SsidLen,          pAd->CommonCfg.Ssid,
-					  1,                               &SupRateIe,
-					  1,                               &SupRateLen,
-					  SupRateLen,                      SupRate,
-					  1,                               &DsIe,
-					  1,                               &DsLen,
-					  1,                               &pAd->CommonCfg.Channel,
-					  1,                               &IbssIe,
-					  1,                               &IbssLen,
-					  2,                               &pAd->StaActive.AtimWin,
-					  END_OF_ARGS);
-
-	// add ERP_IE and EXT_RAE IE of in 802.11g
-	if (ExtRateLen)
-	{
-		ULONG	tmp;
-
-		MakeOutgoingFrame(pBeaconFrame + FrameLen,         &tmp,
-						  3,                               LocalErpIe,
-						  1,                               &ExtRateIe,
-						  1,                               &ExtRateLen,
-						  ExtRateLen,                      ExtRate,
-						  END_OF_ARGS);
-		FrameLen += tmp;
-	}
-
-	// If adhoc secruity is set for WPA-None, append the cipher suite IE
-	if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
-	{
-		ULONG tmp;
-        RTMPMakeRSNIE(pAd, pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus, BSS0);
-
-		MakeOutgoingFrame(pBeaconFrame + FrameLen,        	&tmp,
-						  1,                              	&RSNIe,
-						  1,                            	&pAd->StaCfg.RSNIE_Len,
-						  pAd->StaCfg.RSNIE_Len,      		pAd->StaCfg.RSN_IE,
-						  END_OF_ARGS);
-		FrameLen += tmp;
-	}
-
-#ifdef DOT11_N_SUPPORT
-	if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
-	{
-		ULONG TmpLen;
-		UCHAR HtLen, HtLen1;
-
-#ifdef RT_BIG_ENDIAN
-		HT_CAPABILITY_IE HtCapabilityTmp;
-		ADD_HT_INFO_IE	addHTInfoTmp;
-		USHORT	b2lTmp, b2lTmp2;
-#endif
-
-		// add HT Capability IE
-		HtLen = sizeof(pAd->CommonCfg.HtCapability);
-		HtLen1 = sizeof(pAd->CommonCfg.AddHTInfo);
-#ifndef RT_BIG_ENDIAN
-		MakeOutgoingFrame(pBeaconFrame+FrameLen,	&TmpLen,
-						  1,						&HtCapIe,
-						  1,						&HtLen,
-						  HtLen,					&pAd->CommonCfg.HtCapability,
-						  1,						&AddHtInfoIe,
-						  1,						&HtLen1,
-						  HtLen1,					&pAd->CommonCfg.AddHTInfo,
-						  END_OF_ARGS);
-#else
-		NdisMoveMemory(&HtCapabilityTmp, &pAd->CommonCfg.HtCapability, HtLen);
-		*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
-		*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
-
-		NdisMoveMemory(&addHTInfoTmp, &pAd->CommonCfg.AddHTInfo, HtLen1);
-		*(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
-		*(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
-
-		MakeOutgoingFrame(pBeaconFrame+FrameLen,	&TmpLen,
-						  1,						&HtCapIe,
-						  1,						&HtLen,
-						  HtLen,					&HtCapabilityTmp,
-						  1,						&AddHtInfoIe,
-						  1,						&HtLen1,
-						  HtLen1,					&addHTInfoTmp,
-						  END_OF_ARGS);
-#endif
-		FrameLen += TmpLen;
-	}
-#endif // DOT11_N_SUPPORT //
-
-	//beacon use reserved WCID 0xff
-    if (pAd->CommonCfg.Channel > 14)
-    {
-		RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE,  TRUE, FALSE, FALSE, TRUE, 0, 0xff, FrameLen,
-			PID_MGMT, PID_BEACON, RATE_1, IFS_HTTXOP, FALSE, &pAd->CommonCfg.MlmeTransmit);
-    }
-    else
-    {
-        // Set to use 1Mbps for Adhoc beacon.
-		HTTRANSMIT_SETTING Transmit;
-        Transmit.word = 0;
-        RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE,  TRUE, FALSE, FALSE, TRUE, 0, 0xff, FrameLen,
-    		PID_MGMT, PID_BEACON, RATE_1, IFS_HTTXOP, FALSE, &Transmit);
-    }
-
-#ifdef RT_BIG_ENDIAN
-	RTMPFrameEndianChange(pAd, pBeaconFrame, DIR_WRITE, FALSE);
-	RTMPWIEndianChange((PUCHAR)pTxWI, TYPE_TXWI);
-#endif
-
-    DBGPRINT(RT_DEBUG_TRACE, ("MakeIbssBeacon (len=%ld), SupRateLen=%d, ExtRateLen=%d, Channel=%d, PhyMode=%d\n",
-					FrameLen, SupRateLen, ExtRateLen, pAd->CommonCfg.Channel, pAd->CommonCfg.PhyMode));
-	return FrameLen;
-}
-
-
+#include "../../rt2860/sta/connect.c"
diff --git a/drivers/staging/rt2870/sta/dls.c b/drivers/staging/rt2870/sta/dls.c
deleted file mode 100644
index 56bfbc33d6f..00000000000
--- a/drivers/staging/rt2870/sta/dls.c
+++ /dev/null
@@ -1,2210 +0,0 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-    dls.c
-
-    Abstract:
-    Handle WMM-DLS state machine
-
-    Revision History:
-    Who         When          What
-    --------    ----------    ----------------------------------------------
-    Rory Chen   02-14-2006
-	Arvin Tai	06-03-2008	  Modified for RT28xx
- */
-
-#include "../rt_config.h"
-
-/*
-    ==========================================================================
-    Description:
-        dls state machine init, including state transition and timer init
-    Parameters:
-        Sm - pointer to the dls state machine
-    Note:
-        The state machine looks like this
-
-                            DLS_IDLE
-    MT2_MLME_DLS_REQUEST   MlmeDlsReqAction
-    MT2_PEER_DLS_REQUEST   PeerDlsReqAction
-    MT2_PEER_DLS_RESPONSE  PeerDlsRspAction
-    MT2_MLME_DLS_TEARDOWN  MlmeTearDownAction
-    MT2_PEER_DLS_TEARDOWN  PeerTearDownAction
-
-	IRQL = PASSIVE_LEVEL
-
-    ==========================================================================
- */
-void DlsStateMachineInit(
-    IN PRTMP_ADAPTER pAd,
-    IN STATE_MACHINE *Sm,
-    OUT STATE_MACHINE_FUNC Trans[])
-{
-	UCHAR	i;
-
-    StateMachineInit(Sm, (STATE_MACHINE_FUNC*)Trans, MAX_DLS_STATE, MAX_DLS_MSG, (STATE_MACHINE_FUNC)Drop, DLS_IDLE, DLS_MACHINE_BASE);
-
-    // the first column
-    StateMachineSetAction(Sm, DLS_IDLE, MT2_MLME_DLS_REQ, (STATE_MACHINE_FUNC)MlmeDlsReqAction);
-    StateMachineSetAction(Sm, DLS_IDLE, MT2_PEER_DLS_REQ, (STATE_MACHINE_FUNC)PeerDlsReqAction);
-    StateMachineSetAction(Sm, DLS_IDLE, MT2_PEER_DLS_RSP, (STATE_MACHINE_FUNC)PeerDlsRspAction);
-    StateMachineSetAction(Sm, DLS_IDLE, MT2_MLME_DLS_TEAR_DOWN, (STATE_MACHINE_FUNC)MlmeDlsTearDownAction);
-    StateMachineSetAction(Sm, DLS_IDLE, MT2_PEER_DLS_TEAR_DOWN, (STATE_MACHINE_FUNC)PeerDlsTearDownAction);
-
-	for (i=0; i<MAX_NUM_OF_DLS_ENTRY; i++)
-	{
-		pAd->StaCfg.DLSEntry[i].pAd = pAd;
-		RTMPInitTimer(pAd, &pAd->StaCfg.DLSEntry[i].Timer, GET_TIMER_FUNCTION(DlsTimeoutAction), pAd, FALSE);
-	}
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID MlmeDlsReqAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-	PUCHAR			pOutBuffer = NULL;
-	NDIS_STATUS		NStatus;
-	ULONG			FrameLen = 0;
-	HEADER_802_11	DlsReqHdr;
-	PRT_802_11_DLS	pDLS = NULL;
-	UCHAR			Category = CATEGORY_DLS;
-	UCHAR			Action = ACTION_DLS_REQUEST;
-	ULONG			tmp;
-	USHORT			reason;
-	ULONG			Timeout;
-	BOOLEAN			TimerCancelled;
-
-	if(!MlmeDlsReqSanity(pAd, Elem->Msg, Elem->MsgLen, &pDLS, &reason))
-		return;
-
-	DBGPRINT(RT_DEBUG_TRACE,("DLS - MlmeDlsReqAction() \n"));
-
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-	if (NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("DLS - MlmeDlsReqAction() allocate memory failed \n"));
-		return;
-	}
-
-	ActHeaderInit(pAd, &DlsReqHdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
-
-	// Build basic frame first
-	MakeOutgoingFrame(pOutBuffer,				&FrameLen,
-					sizeof(HEADER_802_11),		&DlsReqHdr,
-					1,							&Category,
-					1,							&Action,
-					6,							&pDLS->MacAddr,
-					6,							pAd->CurrentAddress,
-					2,							&pAd->StaActive.CapabilityInfo,
-					2,							&pDLS->TimeOut,
-					1,							&SupRateIe,
-					1,							&pAd->MlmeAux.SupRateLen,
-					pAd->MlmeAux.SupRateLen,	pAd->MlmeAux.SupRate,
-					END_OF_ARGS);
-
-	if (pAd->MlmeAux.ExtRateLen != 0)
-	{
-		MakeOutgoingFrame(pOutBuffer + FrameLen,	&tmp,
-						  1,						&ExtRateIe,
-						  1,						&pAd->MlmeAux.ExtRateLen,
-						  pAd->MlmeAux.ExtRateLen,	pAd->MlmeAux.ExtRate,
-						  END_OF_ARGS);
-		FrameLen += tmp;
-	}
-
-#ifdef DOT11_N_SUPPORT
-	if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
-	{
-		UCHAR HtLen;
-
-#ifdef RT_BIG_ENDIAN
-		HT_CAPABILITY_IE HtCapabilityTmp;
-#endif
-
-		// add HT Capability IE
-		HtLen = sizeof(HT_CAPABILITY_IE);
-#ifndef RT_BIG_ENDIAN
-		MakeOutgoingFrame(pOutBuffer + FrameLen,	&tmp,
-							1,						&HtCapIe,
-							1,						&HtLen,
-							HtLen,					&pAd->CommonCfg.HtCapability,
-							END_OF_ARGS);
-#else
-		NdisMoveMemory(&HtCapabilityTmp, &pAd->CommonCfg.HtCapability, HtLen);
-							*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
-							*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
-
-		MakeOutgoingFrame(pOutBuffer + FrameLen,	&tmp,
-							1,						&HtCapIe,
-							1,						&HtLen,
-							HtLen,					&HtCapabilityTmp,
-							END_OF_ARGS);
-#endif
-		FrameLen = FrameLen + tmp;
-	}
-#endif // DOT11_N_SUPPORT //
-
-	RTMPCancelTimer(&pDLS->Timer, &TimerCancelled);
-	Timeout = DLS_TIMEOUT;
-	RTMPSetTimer(&pDLS->Timer, Timeout);
-
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID PeerDlsReqAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-	PUCHAR			pOutBuffer = NULL;
-	NDIS_STATUS		NStatus;
-	ULONG			FrameLen = 0;
-	USHORT			StatusCode = MLME_SUCCESS;
-	HEADER_802_11	DlsRspHdr;
-	UCHAR			Category = CATEGORY_DLS;
-	UCHAR			Action = ACTION_DLS_RESPONSE;
-	ULONG			tmp;
-	USHORT			CapabilityInfo;
-	UCHAR			DA[MAC_ADDR_LEN], SA[MAC_ADDR_LEN];
-	USHORT			DLSTimeOut;
-	SHORT			i;
-	ULONG			Timeout;
-	BOOLEAN			TimerCancelled;
-	PRT_802_11_DLS	pDLS = NULL;
-	UCHAR			MaxSupportedRateIn500Kbps = 0;
-    UCHAR			SupportedRatesLen;
-    UCHAR			SupportedRates[MAX_LEN_OF_SUPPORTED_RATES];
-	UCHAR			HtCapabilityLen;
-	HT_CAPABILITY_IE	HtCapability;
-
-	if (!PeerDlsReqSanity(pAd, Elem->Msg, Elem->MsgLen, DA, SA, &CapabilityInfo, &DLSTimeOut,
-							&SupportedRatesLen, &SupportedRates[0], &HtCapabilityLen, &HtCapability))
-		return;
-
-    // supported rates array may not be sorted. sort it and find the maximum rate
-    for (i = 0; i < SupportedRatesLen; i++)
-    {
-        if (MaxSupportedRateIn500Kbps < (SupportedRates[i] & 0x7f))
-            MaxSupportedRateIn500Kbps = SupportedRates[i] & 0x7f;
-    }
-
-	DBGPRINT(RT_DEBUG_TRACE,("DLS - PeerDlsReqAction() from %02x:%02x:%02x:%02x:%02x:%02x\n", SA[0], SA[1], SA[2], SA[3], SA[4], SA[5]));
-
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-	if (NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("DLS - PeerDlsReqAction() allocate memory failed \n"));
-		return;
-	}
-
-	if (!INFRA_ON(pAd))
-	{
-		StatusCode = MLME_REQUEST_DECLINED;
-	}
-	else if (!pAd->CommonCfg.bWmmCapable)
-	{
-		StatusCode = MLME_DEST_STA_IS_NOT_A_QSTA;
-	}
-	else if (!pAd->CommonCfg.bDLSCapable)
-	{
-		StatusCode = MLME_REQUEST_DECLINED;
-	}
-	else
-	{
-		// find table to update parameters
-		for (i = (MAX_NUM_OF_DLS_ENTRY-1); i >= 0; i--)
-		{
-			if (pAd->StaCfg.DLSEntry[i].Valid && MAC_ADDR_EQUAL(SA, pAd->StaCfg.DLSEntry[i].MacAddr))
-			{
-				if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-					pAd->StaCfg.DLSEntry[i].Status = DLS_WAIT_KEY;
-				else
-				{
-					RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-					pAd->StaCfg.DLSEntry[i].Status = DLS_FINISH;
-				}
-
-				pAd->StaCfg.DLSEntry[i].Sequence = 0;
-				pAd->StaCfg.DLSEntry[i].TimeOut = DLSTimeOut;
-				pAd->StaCfg.DLSEntry[i].CountDownTimer = DLSTimeOut;
-				if (HtCapabilityLen != 0)
-					pAd->StaCfg.DLSEntry[i].bHTCap = TRUE;
-				else
-					pAd->StaCfg.DLSEntry[i].bHTCap = FALSE;
-				pDLS = &pAd->StaCfg.DLSEntry[i];
-				break;
-			}
-		}
-
-		// can not find in table, create a new one
-		if (i < 0)
-		{
-			DBGPRINT(RT_DEBUG_TRACE,("DLS - PeerDlsReqAction() can not find same entry \n"));
-			for (i=(MAX_NUM_OF_DLS_ENTRY - 1); i >= MAX_NUM_OF_INIT_DLS_ENTRY; i--)
-			{
-				if (!pAd->StaCfg.DLSEntry[i].Valid)
-				{
-					MAC_TABLE_ENTRY *pEntry;
-					UCHAR MaxSupportedRate = RATE_11;
-
-					if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-					{
-						pAd->StaCfg.DLSEntry[i].Status = DLS_WAIT_KEY;
-					}
-					else
-					{
-						RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-						pAd->StaCfg.DLSEntry[i].Status = DLS_FINISH;
-					}
-
-					pAd->StaCfg.DLSEntry[i].Sequence = 0;
-					pAd->StaCfg.DLSEntry[i].Valid = TRUE;
-					pAd->StaCfg.DLSEntry[i].TimeOut = DLSTimeOut;
-					pAd->StaCfg.DLSEntry[i].CountDownTimer = DLSTimeOut;
-					NdisMoveMemory(pAd->StaCfg.DLSEntry[i].MacAddr, SA, MAC_ADDR_LEN);
-					if (HtCapabilityLen != 0)
-						pAd->StaCfg.DLSEntry[i].bHTCap = TRUE;
-					else
-						pAd->StaCfg.DLSEntry[i].bHTCap = FALSE;
-					pDLS = &pAd->StaCfg.DLSEntry[i];
-					pEntry = MacTableInsertDlsEntry(pAd, SA, i);
-
-					switch (MaxSupportedRateIn500Kbps)
-					{
-						case 108: MaxSupportedRate = RATE_54;   break;
-						case 96:  MaxSupportedRate = RATE_48;   break;
-						case 72:  MaxSupportedRate = RATE_36;   break;
-						case 48:  MaxSupportedRate = RATE_24;   break;
-						case 36:  MaxSupportedRate = RATE_18;   break;
-						case 24:  MaxSupportedRate = RATE_12;   break;
-						case 18:  MaxSupportedRate = RATE_9;    break;
-						case 12:  MaxSupportedRate = RATE_6;    break;
-						case 22:  MaxSupportedRate = RATE_11;   break;
-						case 11:  MaxSupportedRate = RATE_5_5;  break;
-						case 4:   MaxSupportedRate = RATE_2;    break;
-						case 2:   MaxSupportedRate = RATE_1;    break;
-						default:  MaxSupportedRate = RATE_11;   break;
-					}
-
-					pEntry->MaxSupportedRate = min(pAd->CommonCfg.MaxTxRate, MaxSupportedRate);
-
-					if (pEntry->MaxSupportedRate < RATE_FIRST_OFDM_RATE)
-					{
-						pEntry->MaxHTPhyMode.field.MODE = MODE_CCK;
-						pEntry->MaxHTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-						pEntry->MinHTPhyMode.field.MODE = MODE_CCK;
-						pEntry->MinHTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-						pEntry->HTPhyMode.field.MODE = MODE_CCK;
-						pEntry->HTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-					}
-					else
-					{
-						pEntry->MaxHTPhyMode.field.MODE = MODE_OFDM;
-						pEntry->MaxHTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-						pEntry->MinHTPhyMode.field.MODE = MODE_OFDM;
-						pEntry->MinHTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-						pEntry->HTPhyMode.field.MODE = MODE_OFDM;
-						pEntry->HTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-					}
-
-					pEntry->MaxHTPhyMode.field.BW = BW_20;
-					pEntry->MinHTPhyMode.field.BW = BW_20;
-
-#ifdef DOT11_N_SUPPORT
-					pEntry->HTCapability.MCSSet[0] = 0;
-					pEntry->HTCapability.MCSSet[1] = 0;
-
-					// If this Entry supports 802.11n, upgrade to HT rate.
-					if ((HtCapabilityLen != 0) && (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
-					{
-						UCHAR	j, bitmask; //k,bitmask;
-						CHAR    ii;
-
-						DBGPRINT(RT_DEBUG_OFF, ("DLS - PeerDlsReqAction() Receive Peer HT Capable STA from %02x:%02x:%02x:%02x:%02x:%02x\n",
-									SA[0], SA[1], SA[2], SA[3], SA[4], SA[5]));
-
-						if ((HtCapability.HtCapInfo.GF) && (pAd->CommonCfg.DesiredHtPhy.GF))
-						{
-							pEntry->MaxHTPhyMode.field.MODE = MODE_HTGREENFIELD;
-						}
-						else
-						{
-							pEntry->MaxHTPhyMode.field.MODE = MODE_HTMIX;
-							pAd->MacTab.fAnyStationNonGF = TRUE;
-							pAd->CommonCfg.AddHTInfo.AddHtInfo2.NonGfPresent = 1;
-						}
-
-						if ((HtCapability.HtCapInfo.ChannelWidth) && (pAd->CommonCfg.DesiredHtPhy.ChannelWidth))
-						{
-							pEntry->MaxHTPhyMode.field.BW= BW_40;
-							pEntry->MaxHTPhyMode.field.ShortGI = ((pAd->CommonCfg.DesiredHtPhy.ShortGIfor40)&(HtCapability.HtCapInfo.ShortGIfor40));
-						}
-						else
-						{
-							pEntry->MaxHTPhyMode.field.BW = BW_20;
-							pEntry->MaxHTPhyMode.field.ShortGI = ((pAd->CommonCfg.DesiredHtPhy.ShortGIfor20)&(HtCapability.HtCapInfo.ShortGIfor20));
-							pAd->MacTab.fAnyStation20Only = TRUE;
-						}
-
-						// find max fixed rate
-						for (ii=15; ii>=0; ii--)
-						{
-							j = ii/8;
-							bitmask = (1<<(ii-(j*8)));
-							if ( (pAd->StaCfg.DesiredHtPhyInfo.MCSSet[j]&bitmask) && (HtCapability.MCSSet[j]&bitmask))
-							{
-								pEntry->MaxHTPhyMode.field.MCS = ii;
-								break;
-							}
-							if (ii==0)
-								break;
-						}
-
-
-						if (pAd->StaCfg.DesiredTransmitSetting.field.MCS != MCS_AUTO)
-						{
-
-							printk("@@@ pAd->CommonCfg.RegTransmitSetting.field.MCS = %d\n",
-								pAd->StaCfg.DesiredTransmitSetting.field.MCS);
-							if (pAd->StaCfg.DesiredTransmitSetting.field.MCS == 32)
-							{
-								// Fix MCS as HT Duplicated Mode
-								pEntry->MaxHTPhyMode.field.BW = 1;
-								pEntry->MaxHTPhyMode.field.MODE = MODE_HTMIX;
-								pEntry->MaxHTPhyMode.field.STBC = 0;
-								pEntry->MaxHTPhyMode.field.ShortGI = 0;
-								pEntry->MaxHTPhyMode.field.MCS = 32;
-							}
-							else if (pEntry->MaxHTPhyMode.field.MCS > pAd->StaCfg.HTPhyMode.field.MCS)
-							{
-								// STA supports fixed MCS
-								pEntry->MaxHTPhyMode.field.MCS = pAd->StaCfg.HTPhyMode.field.MCS;
-							}
-						}
-
-						pEntry->MaxHTPhyMode.field.STBC = (HtCapability.HtCapInfo.RxSTBC & (pAd->CommonCfg.DesiredHtPhy.TxSTBC));
-						pEntry->MpduDensity = HtCapability.HtCapParm.MpduDensity;
-						pEntry->MaxRAmpduFactor = HtCapability.HtCapParm.MaxRAmpduFactor;
-						pEntry->MmpsMode = (UCHAR)HtCapability.HtCapInfo.MimoPs;
-						pEntry->AMsduSize = (UCHAR)HtCapability.HtCapInfo.AMsduSize;
-						pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word;
-
-						if (HtCapability.HtCapInfo.ShortGIfor20)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI20_CAPABLE);
-						if (HtCapability.HtCapInfo.ShortGIfor40)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI40_CAPABLE);
-						if (HtCapability.HtCapInfo.TxSTBC)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_TxSTBC_CAPABLE);
-						if (HtCapability.HtCapInfo.RxSTBC)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RxSTBC_CAPABLE);
-						if (HtCapability.ExtHtCapInfo.PlusHTC)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_HTC_CAPABLE);
-						if (pAd->CommonCfg.bRdg && HtCapability.ExtHtCapInfo.RDGSupport)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RDG_CAPABLE);
-						if (HtCapability.ExtHtCapInfo.MCSFeedback == 0x03)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_MCSFEEDBACK_CAPABLE);
-
-						NdisMoveMemory(&pEntry->HTCapability, &HtCapability, sizeof(HT_CAPABILITY_IE));
-					}
-#endif // DOT11_N_SUPPORT //
-
-					pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word;
-					pEntry->CurrTxRate = pEntry->MaxSupportedRate;
-					CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_WMM_CAPABLE);
-
-					if (pAd->StaCfg.bAutoTxRateSwitch == TRUE)
-					{
-						PUCHAR pTable;
-						UCHAR TableSize = 0;
-
-						MlmeSelectTxRateTable(pAd, pEntry, &pTable, &TableSize, &pEntry->CurrTxRateIndex);
-						pEntry->bAutoTxRateSwitch = TRUE;
-					}
-					else
-					{
-						pEntry->HTPhyMode.field.MODE	= pAd->StaCfg.HTPhyMode.field.MODE;
-						pEntry->HTPhyMode.field.MCS	= pAd->StaCfg.HTPhyMode.field.MCS;
-						pEntry->bAutoTxRateSwitch = FALSE;
-
-						RTMPUpdateLegacyTxSetting((UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode, pEntry);
-					}
-					pEntry->RateLen = SupportedRatesLen;
-
-					break;
-				}
-			}
-		}
-		StatusCode = MLME_SUCCESS;
-
-		// can not find in table, create a new one
-		if (i < 0)
-		{
-			StatusCode = MLME_QOS_UNSPECIFY;
-			DBGPRINT(RT_DEBUG_ERROR,("DLS - PeerDlsReqAction() DLSEntry table full(only can support %d DLS session) \n", MAX_NUM_OF_DLS_ENTRY - MAX_NUM_OF_INIT_DLS_ENTRY));
-		}
-		else
-		{
-			DBGPRINT(RT_DEBUG_TRACE,("DLS - PeerDlsReqAction() use entry(%d) %02x:%02x:%02x:%02x:%02x:%02x\n",
-				i, SA[0], SA[1], SA[2], SA[3], SA[4], SA[5]));
-		}
-	}
-
-	ActHeaderInit(pAd, &DlsRspHdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
-
-	// Build basic frame first
-	if (StatusCode == MLME_SUCCESS)
-	{
-		MakeOutgoingFrame(pOutBuffer,				&FrameLen,
-						sizeof(HEADER_802_11),		&DlsRspHdr,
-						1,							&Category,
-						1,							&Action,
-						2,							&StatusCode,
-						6,							SA,
-						6,							pAd->CurrentAddress,
-						2,							&pAd->StaActive.CapabilityInfo,
-						1,							&SupRateIe,
-						1,							&pAd->MlmeAux.SupRateLen,
-						pAd->MlmeAux.SupRateLen,	pAd->MlmeAux.SupRate,
-						END_OF_ARGS);
-
-		if (pAd->MlmeAux.ExtRateLen != 0)
-		{
-			MakeOutgoingFrame(pOutBuffer + FrameLen,	&tmp,
-							  1,						&ExtRateIe,
-							  1,						&pAd->MlmeAux.ExtRateLen,
-							  pAd->MlmeAux.ExtRateLen, 	pAd->MlmeAux.ExtRate,
-							  END_OF_ARGS);
-			FrameLen += tmp;
-		}
-
-#ifdef DOT11_N_SUPPORT
-		if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
-		{
-			UCHAR HtLen;
-
-#ifdef RT_BIG_ENDIAN
-			HT_CAPABILITY_IE HtCapabilityTmp;
-#endif
-
-			// add HT Capability IE
-			HtLen = sizeof(HT_CAPABILITY_IE);
-#ifndef RT_BIG_ENDIAN
-			MakeOutgoingFrame(pOutBuffer + FrameLen,	&tmp,
-								1,						&HtCapIe,
-								1,						&HtLen,
-								HtLen,					&pAd->CommonCfg.HtCapability,
-								END_OF_ARGS);
-#else
-			NdisMoveMemory(&HtCapabilityTmp, &pAd->CommonCfg.HtCapability, HtLen);
-								*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
-								*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
-
-			MakeOutgoingFrame(pOutBuffer + FrameLen,	&tmp,
-								1,						&HtCapIe,
-								1,						&HtLen,
-								HtLen,					&HtCapabilityTmp,
-								END_OF_ARGS);
-#endif
-			FrameLen = FrameLen + tmp;
-		}
-#endif // DOT11_N_SUPPORT //
-
-		if (pDLS && (pDLS->Status != DLS_FINISH))
-		{
-			RTMPCancelTimer(&pDLS->Timer, &TimerCancelled);
-			Timeout = DLS_TIMEOUT;
-			RTMPSetTimer(&pDLS->Timer, Timeout);
-		}
-	}
-	else
-	{
-		MakeOutgoingFrame(pOutBuffer,				&FrameLen,
-						sizeof(HEADER_802_11),		&DlsRspHdr,
-						1,							&Category,
-						1,							&Action,
-						2,							&StatusCode,
-						6,							SA,
-						6,							pAd->CurrentAddress,
-						END_OF_ARGS);
-	}
-
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID PeerDlsRspAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT		CapabilityInfo;
-	UCHAR		DA[MAC_ADDR_LEN], SA[MAC_ADDR_LEN];
-	USHORT		StatusCode;
-	SHORT		i;
-	BOOLEAN		TimerCancelled;
-	UCHAR		MaxSupportedRateIn500Kbps = 0;
-    UCHAR		SupportedRatesLen;
-    UCHAR		SupportedRates[MAX_LEN_OF_SUPPORTED_RATES];
-	UCHAR		HtCapabilityLen;
-	HT_CAPABILITY_IE	HtCapability;
-
-	if (!pAd->CommonCfg.bDLSCapable)
-		return;
-
-	if (!INFRA_ON(pAd))
-		return;
-
-	if (!PeerDlsRspSanity(pAd, Elem->Msg, Elem->MsgLen, DA, SA, &CapabilityInfo, &StatusCode,
-							&SupportedRatesLen, &SupportedRates[0], &HtCapabilityLen, &HtCapability))
-		return;
-
-    // supported rates array may not be sorted. sort it and find the maximum rate
-    for (i=0; i<SupportedRatesLen; i++)
-    {
-        if (MaxSupportedRateIn500Kbps < (SupportedRates[i] & 0x7f))
-            MaxSupportedRateIn500Kbps = SupportedRates[i] & 0x7f;
-    }
-
-	DBGPRINT(RT_DEBUG_TRACE,("DLS - PeerDlsRspAction() from %02x:%02x:%02x:%02x:%02x:%02x with StatusCode=%d, CapabilityInfo=0x%x\n",
-		SA[0], SA[1], SA[2], SA[3], SA[4], SA[5], StatusCode, CapabilityInfo));
-
-	for (i = 0; i < MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-	{
-		if (pAd->StaCfg.DLSEntry[i].Valid && MAC_ADDR_EQUAL(SA, pAd->StaCfg.DLSEntry[i].MacAddr))
-		{
-			if (StatusCode == MLME_SUCCESS)
-			{
-				MAC_TABLE_ENTRY *pEntry;
-				UCHAR MaxSupportedRate = RATE_11;
-
-				pEntry = MacTableInsertDlsEntry(pAd, SA, i);
-
-				switch (MaxSupportedRateIn500Kbps)
-				{
-					case 108: MaxSupportedRate = RATE_54;   break;
-					case 96:  MaxSupportedRate = RATE_48;   break;
-					case 72:  MaxSupportedRate = RATE_36;   break;
-					case 48:  MaxSupportedRate = RATE_24;   break;
-					case 36:  MaxSupportedRate = RATE_18;   break;
-					case 24:  MaxSupportedRate = RATE_12;   break;
-					case 18:  MaxSupportedRate = RATE_9;    break;
-					case 12:  MaxSupportedRate = RATE_6;    break;
-					case 22:  MaxSupportedRate = RATE_11;   break;
-					case 11:  MaxSupportedRate = RATE_5_5;  break;
-					case 4:   MaxSupportedRate = RATE_2;    break;
-					case 2:   MaxSupportedRate = RATE_1;    break;
-					default:  MaxSupportedRate = RATE_11;   break;
-				}
-
-				pEntry->MaxSupportedRate = min(pAd->CommonCfg.MaxTxRate, MaxSupportedRate);
-
-				if (pEntry->MaxSupportedRate < RATE_FIRST_OFDM_RATE)
-				{
-					pEntry->MaxHTPhyMode.field.MODE = MODE_CCK;
-					pEntry->MaxHTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-					pEntry->MinHTPhyMode.field.MODE = MODE_CCK;
-					pEntry->MinHTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-					pEntry->HTPhyMode.field.MODE = MODE_CCK;
-					pEntry->HTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-				}
-				else
-				{
-					pEntry->MaxHTPhyMode.field.MODE = MODE_OFDM;
-					pEntry->MaxHTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-					pEntry->MinHTPhyMode.field.MODE = MODE_OFDM;
-					pEntry->MinHTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-					pEntry->HTPhyMode.field.MODE = MODE_OFDM;
-					pEntry->HTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-				}
-
-				pEntry->MaxHTPhyMode.field.BW = BW_20;
-				pEntry->MinHTPhyMode.field.BW = BW_20;
-
-#ifdef DOT11_N_SUPPORT
-				pEntry->HTCapability.MCSSet[0] = 0;
-				pEntry->HTCapability.MCSSet[1] = 0;
-
-				// If this Entry supports 802.11n, upgrade to HT rate.
-				if ((HtCapabilityLen != 0) && (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
-				{
-					UCHAR	j, bitmask; //k,bitmask;
-					CHAR    ii;
-
-					DBGPRINT(RT_DEBUG_OFF, ("DLS - PeerDlsRspAction Receive Peer HT Capable STA from %02x:%02x:%02x:%02x:%02x:%02x\n",
-								SA[0], SA[1], SA[2], SA[3], SA[4], SA[5]));
-
-					if ((HtCapability.HtCapInfo.GF) && (pAd->CommonCfg.DesiredHtPhy.GF))
-					{
-						pEntry->MaxHTPhyMode.field.MODE = MODE_HTGREENFIELD;
-					}
-					else
-					{
-						pEntry->MaxHTPhyMode.field.MODE = MODE_HTMIX;
-						pAd->MacTab.fAnyStationNonGF = TRUE;
-						pAd->CommonCfg.AddHTInfo.AddHtInfo2.NonGfPresent = 1;
-					}
-
-					if ((HtCapability.HtCapInfo.ChannelWidth) && (pAd->CommonCfg.DesiredHtPhy.ChannelWidth))
-					{
-						pEntry->MaxHTPhyMode.field.BW= BW_40;
-						pEntry->MaxHTPhyMode.field.ShortGI = ((pAd->CommonCfg.DesiredHtPhy.ShortGIfor40)&(HtCapability.HtCapInfo.ShortGIfor40));
-					}
-					else
-					{
-						pEntry->MaxHTPhyMode.field.BW = BW_20;
-						pEntry->MaxHTPhyMode.field.ShortGI = ((pAd->CommonCfg.DesiredHtPhy.ShortGIfor20)&(HtCapability.HtCapInfo.ShortGIfor20));
-						pAd->MacTab.fAnyStation20Only = TRUE;
-					}
-
-					// find max fixed rate
-					for (ii=15; ii>=0; ii--)
-					{
-						j = ii/8;
-						bitmask = (1<<(ii-(j*8)));
-						if ( (pAd->StaCfg.DesiredHtPhyInfo.MCSSet[j]&bitmask) && (HtCapability.MCSSet[j]&bitmask))
-						{
-							pEntry->MaxHTPhyMode.field.MCS = ii;
-							break;
-						}
-						if (ii==0)
-							break;
-					}
-
-					if (pAd->StaCfg.DesiredTransmitSetting.field.MCS != MCS_AUTO)
-					{
-						if (pAd->StaCfg.DesiredTransmitSetting.field.MCS == 32)
-						{
-							// Fix MCS as HT Duplicated Mode
-							pEntry->MaxHTPhyMode.field.BW = 1;
-							pEntry->MaxHTPhyMode.field.MODE = MODE_HTMIX;
-							pEntry->MaxHTPhyMode.field.STBC = 0;
-							pEntry->MaxHTPhyMode.field.ShortGI = 0;
-							pEntry->MaxHTPhyMode.field.MCS = 32;
-						}
-						else if (pEntry->MaxHTPhyMode.field.MCS > pAd->StaCfg.HTPhyMode.field.MCS)
-						{
-							// STA supports fixed MCS
-							pEntry->MaxHTPhyMode.field.MCS = pAd->StaCfg.HTPhyMode.field.MCS;
-						}
-					}
-
-					pEntry->MaxHTPhyMode.field.STBC = (HtCapability.HtCapInfo.RxSTBC & (pAd->CommonCfg.DesiredHtPhy.TxSTBC));
-					pEntry->MpduDensity = HtCapability.HtCapParm.MpduDensity;
-					pEntry->MaxRAmpduFactor = HtCapability.HtCapParm.MaxRAmpduFactor;
-					pEntry->MmpsMode = (UCHAR)HtCapability.HtCapInfo.MimoPs;
-					pEntry->AMsduSize = (UCHAR)HtCapability.HtCapInfo.AMsduSize;
-					pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word;
-
-					if (HtCapability.HtCapInfo.ShortGIfor20)
-						CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI20_CAPABLE);
-					if (HtCapability.HtCapInfo.ShortGIfor40)
-						CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI40_CAPABLE);
-					if (HtCapability.HtCapInfo.TxSTBC)
-						CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_TxSTBC_CAPABLE);
-					if (HtCapability.HtCapInfo.RxSTBC)
-						CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RxSTBC_CAPABLE);
-					if (HtCapability.ExtHtCapInfo.PlusHTC)
-						CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_HTC_CAPABLE);
-					if (pAd->CommonCfg.bRdg && HtCapability.ExtHtCapInfo.RDGSupport)
-						CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RDG_CAPABLE);
-					if (HtCapability.ExtHtCapInfo.MCSFeedback == 0x03)
-						CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_MCSFEEDBACK_CAPABLE);
-
-					NdisMoveMemory(&pEntry->HTCapability, &HtCapability, sizeof(HT_CAPABILITY_IE));
-				}
-#endif // DOT11_N_SUPPORT //
-				pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word;
-				pEntry->CurrTxRate = pEntry->MaxSupportedRate;
-				CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_WMM_CAPABLE);
-
-				if (pAd->StaCfg.bAutoTxRateSwitch == TRUE)
-				{
-					PUCHAR pTable;
-					UCHAR TableSize = 0;
-
-					MlmeSelectTxRateTable(pAd, pEntry, &pTable, &TableSize, &pEntry->CurrTxRateIndex);
-					pEntry->bAutoTxRateSwitch = TRUE;
-				}
-				else
-				{
-					pEntry->HTPhyMode.field.MODE	= pAd->StaCfg.HTPhyMode.field.MODE;
-					pEntry->HTPhyMode.field.MCS	= pAd->StaCfg.HTPhyMode.field.MCS;
-					pEntry->bAutoTxRateSwitch = FALSE;
-
-					RTMPUpdateLegacyTxSetting((UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode, pEntry);
-				}
-				pEntry->RateLen = SupportedRatesLen;
-
-				if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-				{
-					// If support WPA or WPA2, start STAKey hand shake,
-					// If failed hand shake, just tear down peer DLS
-					if (RTMPSendSTAKeyRequest(pAd, pAd->StaCfg.DLSEntry[i].MacAddr) != NDIS_STATUS_SUCCESS)
-					{
-						MLME_DLS_REQ_STRUCT	MlmeDlsReq;
-						USHORT				reason = REASON_QOS_CIPHER_NOT_SUPPORT;
-
-						DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-						MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-						pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
-						pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-						DBGPRINT(RT_DEBUG_ERROR,("DLS - PeerDlsRspAction failed when call RTMPSendSTAKeyRequest \n"));
-					}
-					else
-					{
-						pAd->StaCfg.DLSEntry[i].Status = DLS_WAIT_KEY;
-						DBGPRINT(RT_DEBUG_TRACE,("DLS - waiting for STAKey handshake procedure\n"));
-					}
-				}
-				else
-				{
-					RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-					pAd->StaCfg.DLSEntry[i].Status = DLS_FINISH;
-					DBGPRINT(RT_DEBUG_TRACE,("DLS - PeerDlsRspAction() from %02x:%02x:%02x:%02x:%02x:%02x Succeed with WEP or no security\n", SA[0], SA[1], SA[2], SA[3], SA[4], SA[5]));
-				}
-
-				//initialize seq no for DLS frames.
-				pAd->StaCfg.DLSEntry[i].Sequence = 0;
-				if (HtCapabilityLen != 0)
-					pAd->StaCfg.DLSEntry[i].bHTCap = TRUE;
-				else
-					pAd->StaCfg.DLSEntry[i].bHTCap = FALSE;
-			}
-			else
-			{
-				// DLS setup procedure failed.
-				pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
-				pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-				RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-				DBGPRINT(RT_DEBUG_ERROR,("DLS - PeerDlsRspAction failed with StatusCode=%d \n", StatusCode));
-			}
-		}
-	}
-
-	if (i >= MAX_NUM_OF_INIT_DLS_ENTRY)
-	{
-		DBGPRINT(RT_DEBUG_TRACE,("DLS - PeerDlsRspAction() update timeout value \n"));
-		for (i=(MAX_NUM_OF_DLS_ENTRY-1); i>=MAX_NUM_OF_INIT_DLS_ENTRY; i--)
-		{
-			if (pAd->StaCfg.DLSEntry[i].Valid && MAC_ADDR_EQUAL(SA, pAd->StaCfg.DLSEntry[i].MacAddr))
-			{
-				if (StatusCode == MLME_SUCCESS)
-				{
-					MAC_TABLE_ENTRY *pEntry;
-					UCHAR MaxSupportedRate = RATE_11;
-
-					pEntry = MacTableInsertDlsEntry(pAd, SA, i);
-
-					switch (MaxSupportedRateIn500Kbps)
-					{
-						case 108: MaxSupportedRate = RATE_54;   break;
-						case 96:  MaxSupportedRate = RATE_48;   break;
-						case 72:  MaxSupportedRate = RATE_36;   break;
-						case 48:  MaxSupportedRate = RATE_24;   break;
-						case 36:  MaxSupportedRate = RATE_18;   break;
-						case 24:  MaxSupportedRate = RATE_12;   break;
-						case 18:  MaxSupportedRate = RATE_9;    break;
-						case 12:  MaxSupportedRate = RATE_6;    break;
-						case 22:  MaxSupportedRate = RATE_11;   break;
-						case 11:  MaxSupportedRate = RATE_5_5;  break;
-						case 4:   MaxSupportedRate = RATE_2;    break;
-						case 2:   MaxSupportedRate = RATE_1;    break;
-						default:  MaxSupportedRate = RATE_11;   break;
-					}
-
-					pEntry->MaxSupportedRate = min(pAd->CommonCfg.MaxTxRate, MaxSupportedRate);
-
-					if (pEntry->MaxSupportedRate < RATE_FIRST_OFDM_RATE)
-					{
-						pEntry->MaxHTPhyMode.field.MODE = MODE_CCK;
-						pEntry->MaxHTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-						pEntry->MinHTPhyMode.field.MODE = MODE_CCK;
-						pEntry->MinHTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-						pEntry->HTPhyMode.field.MODE = MODE_CCK;
-						pEntry->HTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-					}
-					else
-					{
-						pEntry->MaxHTPhyMode.field.MODE = MODE_OFDM;
-						pEntry->MaxHTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-						pEntry->MinHTPhyMode.field.MODE = MODE_OFDM;
-						pEntry->MinHTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-						pEntry->HTPhyMode.field.MODE = MODE_OFDM;
-						pEntry->HTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-					}
-
-					pEntry->MaxHTPhyMode.field.BW = BW_20;
-					pEntry->MinHTPhyMode.field.BW = BW_20;
-
-#ifdef DOT11_N_SUPPORT
-					pEntry->HTCapability.MCSSet[0] = 0;
-					pEntry->HTCapability.MCSSet[1] = 0;
-
-					// If this Entry supports 802.11n, upgrade to HT rate.
-					if ((HtCapabilityLen != 0) && (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
-					{
-						UCHAR	j, bitmask; //k,bitmask;
-						CHAR    ii;
-
-						DBGPRINT(RT_DEBUG_OFF, ("DLS - PeerDlsRspAction Receive Peer HT Capable STA from %02x:%02x:%02x:%02x:%02x:%02x\n",
-									SA[0], SA[1], SA[2], SA[3], SA[4], SA[5]));
-
-						if ((HtCapability.HtCapInfo.GF) && (pAd->CommonCfg.DesiredHtPhy.GF))
-						{
-							pEntry->MaxHTPhyMode.field.MODE = MODE_HTGREENFIELD;
-						}
-						else
-						{
-							pEntry->MaxHTPhyMode.field.MODE = MODE_HTMIX;
-							pAd->MacTab.fAnyStationNonGF = TRUE;
-							pAd->CommonCfg.AddHTInfo.AddHtInfo2.NonGfPresent = 1;
-						}
-
-						if ((HtCapability.HtCapInfo.ChannelWidth) && (pAd->CommonCfg.DesiredHtPhy.ChannelWidth))
-						{
-							pEntry->MaxHTPhyMode.field.BW= BW_40;
-							pEntry->MaxHTPhyMode.field.ShortGI = ((pAd->CommonCfg.DesiredHtPhy.ShortGIfor40)&(HtCapability.HtCapInfo.ShortGIfor40));
-						}
-						else
-						{
-							pEntry->MaxHTPhyMode.field.BW = BW_20;
-							pEntry->MaxHTPhyMode.field.ShortGI = ((pAd->CommonCfg.DesiredHtPhy.ShortGIfor20)&(HtCapability.HtCapInfo.ShortGIfor20));
-							pAd->MacTab.fAnyStation20Only = TRUE;
-						}
-
-						// find max fixed rate
-						for (ii=15; ii>=0; ii--)
-						{
-							j = ii/8;
-							bitmask = (1<<(ii-(j*8)));
-							if ( (pAd->StaCfg.DesiredHtPhyInfo.MCSSet[j]&bitmask) && (HtCapability.MCSSet[j]&bitmask))
-							{
-								pEntry->MaxHTPhyMode.field.MCS = ii;
-								break;
-							}
-							if (ii==0)
-								break;
-						}
-
-						if (pAd->StaCfg.DesiredTransmitSetting.field.MCS != MCS_AUTO)
-						{
-							printk("@@@ pAd->CommonCfg.RegTransmitSetting.field.MCS = %d\n",
-								pAd->StaCfg.DesiredTransmitSetting.field.MCS);
-							if (pAd->StaCfg.DesiredTransmitSetting.field.MCS == 32)
-							{
-								// Fix MCS as HT Duplicated Mode
-								pEntry->MaxHTPhyMode.field.BW = 1;
-								pEntry->MaxHTPhyMode.field.MODE = MODE_HTMIX;
-								pEntry->MaxHTPhyMode.field.STBC = 0;
-								pEntry->MaxHTPhyMode.field.ShortGI = 0;
-								pEntry->MaxHTPhyMode.field.MCS = 32;
-							}
-							else if (pEntry->MaxHTPhyMode.field.MCS > pAd->StaCfg.HTPhyMode.field.MCS)
-							{
-								// STA supports fixed MCS
-								pEntry->MaxHTPhyMode.field.MCS = pAd->StaCfg.HTPhyMode.field.MCS;
-							}
-						}
-
-						pEntry->MaxHTPhyMode.field.STBC = (HtCapability.HtCapInfo.RxSTBC & (pAd->CommonCfg.DesiredHtPhy.TxSTBC));
-						pEntry->MpduDensity = HtCapability.HtCapParm.MpduDensity;
-						pEntry->MaxRAmpduFactor = HtCapability.HtCapParm.MaxRAmpduFactor;
-						pEntry->MmpsMode = (UCHAR)HtCapability.HtCapInfo.MimoPs;
-						pEntry->AMsduSize = (UCHAR)HtCapability.HtCapInfo.AMsduSize;
-						pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word;
-
-						if (HtCapability.HtCapInfo.ShortGIfor20)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI20_CAPABLE);
-						if (HtCapability.HtCapInfo.ShortGIfor40)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI40_CAPABLE);
-						if (HtCapability.HtCapInfo.TxSTBC)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_TxSTBC_CAPABLE);
-						if (HtCapability.HtCapInfo.RxSTBC)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RxSTBC_CAPABLE);
-						if (HtCapability.ExtHtCapInfo.PlusHTC)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_HTC_CAPABLE);
-						if (pAd->CommonCfg.bRdg && HtCapability.ExtHtCapInfo.RDGSupport)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RDG_CAPABLE);
-						if (HtCapability.ExtHtCapInfo.MCSFeedback == 0x03)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_MCSFEEDBACK_CAPABLE);
-
-						NdisMoveMemory(&pEntry->HTCapability, &HtCapability, sizeof(HT_CAPABILITY_IE));
-					}
-#endif // DOT11_N_SUPPORT //
-
-					pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word;
-					pEntry->CurrTxRate = pEntry->MaxSupportedRate;
-					CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_WMM_CAPABLE);
-
-					if (pAd->StaCfg.bAutoTxRateSwitch == TRUE)
-					{
-						PUCHAR pTable;
-						UCHAR TableSize = 0;
-
-						MlmeSelectTxRateTable(pAd, pEntry, &pTable, &TableSize, &pEntry->CurrTxRateIndex);
-						pEntry->bAutoTxRateSwitch = TRUE;
-					}
-					else
-					{
-						pEntry->HTPhyMode.field.MODE	= pAd->StaCfg.HTPhyMode.field.MODE;
-						pEntry->HTPhyMode.field.MCS	= pAd->StaCfg.HTPhyMode.field.MCS;
-						pEntry->bAutoTxRateSwitch = FALSE;
-
-						RTMPUpdateLegacyTxSetting((UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode, pEntry);
-					}
-					pEntry->RateLen = SupportedRatesLen;
-
-					if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-					{
-						// If support WPA or WPA2, start STAKey hand shake,
-						// If failed hand shake, just tear down peer DLS
-						if (RTMPSendSTAKeyRequest(pAd, pAd->StaCfg.DLSEntry[i].MacAddr) != NDIS_STATUS_SUCCESS)
-						{
-							MLME_DLS_REQ_STRUCT	MlmeDlsReq;
-							USHORT				reason = REASON_QOS_CIPHER_NOT_SUPPORT;
-
-							DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-							MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-							pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
-							pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-							DBGPRINT(RT_DEBUG_ERROR,("DLS - PeerDlsRspAction failed when call RTMPSendSTAKeyRequest \n"));
-						}
-						else
-						{
-							pAd->StaCfg.DLSEntry[i].Status = DLS_WAIT_KEY;
-							DBGPRINT(RT_DEBUG_TRACE,("DLS - waiting for STAKey handshake procedure\n"));
-						}
-					}
-					else
-					{
-						RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-						pAd->StaCfg.DLSEntry[i].Status = DLS_FINISH;
-						DBGPRINT(RT_DEBUG_TRACE,("DLS - PeerDlsRspAction() from %02x:%02x:%02x:%02x:%02x:%02x Succeed with WEP or no security\n", SA[0], SA[1], SA[2], SA[3], SA[4], SA[5]));
-					}
-					pAd->StaCfg.DLSEntry[i].Sequence = 0;
-					if (HtCapabilityLen != 0)
-						pAd->StaCfg.DLSEntry[i].bHTCap = TRUE;
-					else
-						pAd->StaCfg.DLSEntry[i].bHTCap = FALSE;
-				}
-				else
-				{
-					// DLS setup procedure failed.
-					pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
-					pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-					RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-					DBGPRINT(RT_DEBUG_ERROR,("DLS - PeerDlsRspAction failed with StatusCode=%d \n", StatusCode));
-				}
-			}
-		}
-	}
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID MlmeDlsTearDownAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-	PUCHAR			pOutBuffer = NULL;
-	NDIS_STATUS		NStatus;
-	ULONG			FrameLen = 0;
-	UCHAR			Category = CATEGORY_DLS;
-	UCHAR			Action = ACTION_DLS_TEARDOWN;
-	USHORT			ReasonCode = REASON_QOS_UNSPECIFY;
-	HEADER_802_11	DlsTearDownHdr;
-	PRT_802_11_DLS	pDLS;
-	BOOLEAN			TimerCancelled;
-	UCHAR			i;
-
-	if(!MlmeDlsReqSanity(pAd, Elem->Msg, Elem->MsgLen, &pDLS, &ReasonCode))
-		return;
-
-	DBGPRINT(RT_DEBUG_TRACE,("DLS - MlmeDlsTearDownAction() with ReasonCode=%d \n", ReasonCode));
-
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-	if (NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("DLS - MlmeDlsTearDownAction() allocate memory failed \n"));
-		return;
-	}
-
-	ActHeaderInit(pAd, &DlsTearDownHdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
-
-	// Build basic frame first
-	MakeOutgoingFrame(pOutBuffer,				&FrameLen,
-					sizeof(HEADER_802_11),		&DlsTearDownHdr,
-					1,							&Category,
-					1,							&Action,
-					6,							&pDLS->MacAddr,
-					6,							pAd->CurrentAddress,
-					2,							&ReasonCode,
-					END_OF_ARGS);
-
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-	RTMPCancelTimer(&pDLS->Timer, &TimerCancelled);
-
-	// Remove key in local dls table entry
-	for (i = 0; i < MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-	{
-		if (MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
-		{
-			MacTableDeleteDlsEntry(pAd, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID, pAd->StaCfg.DLSEntry[i].MacAddr);
-		}
-	}
-
-	// clear peer dls table entry
-	for (i = MAX_NUM_OF_INIT_DLS_ENTRY; i < MAX_NUM_OF_DLS_ENTRY; i++)
-	{
-		if (MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
-		{
-			pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-			pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-			RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-			MacTableDeleteDlsEntry(pAd, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID, pAd->StaCfg.DLSEntry[i].MacAddr);
-		}
-	}
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID PeerDlsTearDownAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR			DA[MAC_ADDR_LEN], SA[MAC_ADDR_LEN];
-	USHORT			ReasonCode;
-	UINT			i;
-	BOOLEAN			TimerCancelled;
-
-	if (!pAd->CommonCfg.bDLSCapable)
-		return;
-
-	if (!INFRA_ON(pAd))
-		return;
-
-	if (!PeerDlsTearDownSanity(pAd, Elem->Msg, Elem->MsgLen, DA, SA, &ReasonCode))
-		return;
-
-	DBGPRINT(RT_DEBUG_TRACE,("DLS - PeerDlsTearDownAction() from %02x:%02x:%02x:%02x:%02x:%02x with ReasonCode=%d\n", SA[0], SA[1], SA[2], SA[3], SA[4], SA[5], ReasonCode));
-
-	// clear local dls table entry
-	for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-	{
-		if (pAd->StaCfg.DLSEntry[i].Valid && MAC_ADDR_EQUAL(SA, pAd->StaCfg.DLSEntry[i].MacAddr))
-		{
-			pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-			pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-			RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-			//AsicDelWcidTab(pAd, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID);
-			//AsicRemovePairwiseKeyEntry(pAd, BSS0, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID);
-			MacTableDeleteDlsEntry(pAd, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID, pAd->StaCfg.DLSEntry[i].MacAddr);
-		}
-	}
-
-	// clear peer dls table entry
-	for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
-	{
-		if (pAd->StaCfg.DLSEntry[i].Valid && MAC_ADDR_EQUAL(SA, pAd->StaCfg.DLSEntry[i].MacAddr))
-		{
-			pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-			pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-			RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-			//AsicDelWcidTab(pAd, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID);
-			//AsicRemovePairwiseKeyEntry(pAd, BSS0, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID);
-			MacTableDeleteDlsEntry(pAd, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID, pAd->StaCfg.DLSEntry[i].MacAddr);
-		}
-	}
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID RTMPCheckDLSTimeOut(
-	IN PRTMP_ADAPTER	pAd)
-{
-	ULONG				i;
-	MLME_DLS_REQ_STRUCT	MlmeDlsReq;
-	USHORT				reason = REASON_QOS_UNSPECIFY;
-
-	if (! pAd->CommonCfg.bDLSCapable)
-		return;
-
-	if (! INFRA_ON(pAd))
-		return;
-
-	// If timeout value is equaled to zero, it means always not be timeout.
-
-	// update local dls table entry
-	for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-	{
-		if ((pAd->StaCfg.DLSEntry[i].Valid) && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH)
-			&& (pAd->StaCfg.DLSEntry[i].TimeOut != 0))
-		{
-			pAd->StaCfg.DLSEntry[i].CountDownTimer --;
-
-			if (pAd->StaCfg.DLSEntry[i].CountDownTimer == 0)
-			{
-				reason = REASON_QOS_REQUEST_TIMEOUT;
-				pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-				pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-				DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-				MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-			}
-		}
-	}
-
-	// update peer dls table entry
-	for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
-	{
-		if ((pAd->StaCfg.DLSEntry[i].Valid) && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH)
-			&& (pAd->StaCfg.DLSEntry[i].TimeOut != 0))
-		{
-			pAd->StaCfg.DLSEntry[i].CountDownTimer --;
-
-			if (pAd->StaCfg.DLSEntry[i].CountDownTimer == 0)
-			{
-				reason = REASON_QOS_REQUEST_TIMEOUT;
-				pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-				pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-				DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-				MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-			}
-		}
-	}
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-BOOLEAN RTMPRcvFrameDLSCheck(
-	IN PRTMP_ADAPTER	pAd,
-	IN PHEADER_802_11	pHeader,
-	IN ULONG			Len,
-	IN PRT28XX_RXD_STRUC	pRxD)
-{
-	ULONG			i;
-	BOOLEAN			bFindEntry = FALSE;
-	BOOLEAN			bSTAKeyFrame = FALSE;
-	PEAPOL_PACKET	pEap;
-	PUCHAR			pProto, pAddr = NULL;
-	PUCHAR			pSTAKey = NULL;
-	UCHAR			ZeroReplay[LEN_KEY_DESC_REPLAY];
-	UCHAR			Mic[16], OldMic[16];
-	UCHAR			digest[80];
-	UCHAR			DlsPTK[80];
-	UCHAR			temp[64];
-	BOOLEAN			TimerCancelled;
-	CIPHER_KEY		PairwiseKey;
-
-
-	if (! pAd->CommonCfg.bDLSCapable)
-		return bSTAKeyFrame;
-
-	if (! INFRA_ON(pAd))
-		return bSTAKeyFrame;
-
-	if (! (pHeader->FC.SubType & 0x08))
-		return bSTAKeyFrame;
-
-	if (Len < LENGTH_802_11 + 6 + 2 + 2)
-		return bSTAKeyFrame;
-
-	pProto	= (PUCHAR)pHeader + LENGTH_802_11 + 2 + 6;	// QOS Control field , 0xAA 0xAA 0xAA 0x00 0x00 0x00
-	pAddr	= pHeader->Addr2;
-
-	// L2PAD bit on will pad 2 bytes at LLC
-	if (pRxD->L2PAD)
-	{
-		pProto += 2;
-	}
-
-	if (RTMPEqualMemory(EAPOL, pProto, 2) && (pAd->StaCfg.AuthMode >=  Ndis802_11AuthModeWPA))
-	{
-		pEap = (PEAPOL_PACKET) (pProto + 2);
-
-		DBGPRINT(RT_DEBUG_TRACE,("DLS - Sniff Len=%ld, DataLen=%d, KeyMic=%d, Install=%d, KeyAck=%d, Secure=%d, EKD_DL=%d, Error=%d, Request=%d\n", Len,
-			                                                             (LENGTH_802_11 + 6 + 2 + 2 + sizeof(EAPOL_PACKET) - MAX_LEN_OF_RSNIE + 16),
-			                                                             pEap->KeyDesc.KeyInfo.KeyMic,
-			                                                             pEap->KeyDesc.KeyInfo.Install,
-			                                                             pEap->KeyDesc.KeyInfo.KeyAck,
-			                                                             pEap->KeyDesc.KeyInfo.Secure,
-			                                                             pEap->KeyDesc.KeyInfo.EKD_DL,
-			                                                             pEap->KeyDesc.KeyInfo.Error,
-			                                                             pEap->KeyDesc.KeyInfo.Request));
-
-		if ((Len >= (LENGTH_802_11 + 6 + 2 + 2 + sizeof(EAPOL_PACKET) - MAX_LEN_OF_RSNIE + 16)) && pEap->KeyDesc.KeyInfo.KeyMic
-			&& pEap->KeyDesc.KeyInfo.Install && pEap->KeyDesc.KeyInfo.KeyAck && pEap->KeyDesc.KeyInfo.Secure
-			&& pEap->KeyDesc.KeyInfo.EKD_DL && !pEap->KeyDesc.KeyInfo.Error && !pEap->KeyDesc.KeyInfo.Request)
-		{
-			// First validate replay counter, only accept message with larger replay counter
-			// Let equal pass, some AP start with all zero replay counter
-			NdisZeroMemory(ZeroReplay, LEN_KEY_DESC_REPLAY);
-			if ((RTMPCompareMemory(pEap->KeyDesc.ReplayCounter, pAd->StaCfg.ReplayCounter, LEN_KEY_DESC_REPLAY) != 1) &&
-				(RTMPCompareMemory(pEap->KeyDesc.ReplayCounter, ZeroReplay, LEN_KEY_DESC_REPLAY) != 0))
-				return bSTAKeyFrame;
-
-			//RTMPMoveMemory(pAd->StaCfg.ReplayCounter, pEap->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-			RTMPMoveMemory(pAd->StaCfg.DlsReplayCounter, pEap->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-			DBGPRINT(RT_DEBUG_TRACE,("DLS - Sniff replay counter (%02x-%02x-%02x-%02x-%02x-%02x-%02x-%02x) Len=%ld, KeyDataLen=%d\n",
-				pAd->StaCfg.ReplayCounter[0], pAd->StaCfg.ReplayCounter[1], pAd->StaCfg.ReplayCounter[2],
-				pAd->StaCfg.ReplayCounter[3], pAd->StaCfg.ReplayCounter[4],	pAd->StaCfg.ReplayCounter[5],
-				pAd->StaCfg.ReplayCounter[6], pAd->StaCfg.ReplayCounter[7], Len, pEap->KeyDesc.KeyData[1]));
-
-			// put these code segment to get the replay counter
-			if (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED)
-				return bSTAKeyFrame;
-
-			// Check MIC value
-			// Save the MIC and replace with zero
-			// use proprietary PTK
-			NdisZeroMemory(temp, 64);
-			NdisMoveMemory(temp, "IEEE802.11 WIRELESS ACCESS POINT", 32);
-			WpaCountPTK(pAd, temp, temp, pAd->CommonCfg.Bssid, temp, pAd->CurrentAddress, DlsPTK, LEN_PTK);
-
-			NdisMoveMemory(OldMic, pEap->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
-			NdisZeroMemory(pEap->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
-			if (pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled)
-			{
-				// AES
-				HMAC_SHA1((PUCHAR) pEap, pEap->Body_Len[1] + 4, DlsPTK, LEN_EAP_MICK, digest);
-				NdisMoveMemory(Mic,	digest,	LEN_KEY_DESC_MIC);
-			}
-			else
-			{
-				hmac_md5(DlsPTK, LEN_EAP_MICK, (PUCHAR) pEap, pEap->Body_Len[1] + 4, Mic);
-			}
-
-			if (!NdisEqualMemory(OldMic, Mic, LEN_KEY_DESC_MIC))
-			{
-				DBGPRINT(RT_DEBUG_ERROR, ("MIC Different in Msg1 of STAKey handshake! \n"));
-				return bSTAKeyFrame;
-			}
-			else
-				DBGPRINT(RT_DEBUG_TRACE, ("MIC VALID in Msg1 of STAKey handshake! \n"));
-#if 1
-			if ((pEap->KeyDesc.KeyData[0] == 0xDD) && (pEap->KeyDesc.KeyData[2] == 0x00) && (pEap->KeyDesc.KeyData[3] == 0x0C)
-				&& (pEap->KeyDesc.KeyData[4] == 0x43) && (pEap->KeyDesc.KeyData[5] == 0x02))
-			{
-				pAddr			= pEap->KeyDesc.KeyData + 8;		// Tpe(1), Len(1), OUI(3), DataType(1), Reserved(2)
-				pSTAKey			= pEap->KeyDesc.KeyData + 14;	// Tpe(1), Len(1), OUI(3), DataType(1), Reserved(2), STAKey_Mac_Addr(6)
-
-				DBGPRINT(RT_DEBUG_TRACE,("DLS - Receive STAKey Message-1 from %02x:%02x:%02x:%02x:%02x:%02x Len=%ld, KeyDataLen=%d\n",
-					pAddr[0], pAddr[1], pAddr[2], pAddr[3], pAddr[4], pAddr[5], Len, pEap->KeyDesc.KeyData[1]));
-
-				bSTAKeyFrame = TRUE;
-			}
-#else
-			if ((pEap->KeyDesc.KeyData[0] == 0xDD) && (pEap->KeyDesc.KeyData[2] == 0x00) && (pEap->KeyDesc.KeyData[3] == 0x0F)
-				&& (pEap->KeyDesc.KeyData[4] == 0xAC) && (pEap->KeyDesc.KeyData[5] == 0x02))
-			{
-				pAddr			= pEap->KeyDesc.KeyData + 8;		// Tpe(1), Len(1), OUI(3), DataType(1), Reserved(2)
-				pSTAKey			= pEap->KeyDesc.KeyData + 14;	// Tpe(1), Len(1), OUI(3), DataType(1), Reserved(2), STAKey_Mac_Addr(6)
-
-				DBGPRINT(RT_DEBUG_TRACE,("DLS - Receive STAKey Message-1 from %02x:%02x:%02x:%02x:%02x:%02x Len=%d, KeyDataLen=%d\n",
-					pAddr[0], pAddr[1], pAddr[2], pAddr[3], pAddr[4], pAddr[5], Len, pEap->KeyDesc.KeyData[1]));
-
-				bSTAKeyFrame = TRUE;
-			}
-#endif
-
-		}
-		else if (Len >= (LENGTH_802_11 + 6 + 2 + 2 + sizeof(EAPOL_PACKET) - MAX_LEN_OF_RSNIE))
-		{
-#if 0
-			RTMPMoveMemory(pAd->StaCfg.ReplayCounter, pEap->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-
-#endif
-			RTMPMoveMemory(pAd->StaCfg.DlsReplayCounter, pEap->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-			DBGPRINT(RT_DEBUG_TRACE,("DLS - Sniff replay counter 2(%02x-%02x-%02x-%02x-%02x-%02x-%02x-%02x) Len=%ld, KeyDataLen=%d\n",
-				pAd->StaCfg.ReplayCounter[0], pAd->StaCfg.ReplayCounter[1], pAd->StaCfg.ReplayCounter[2],
-				pAd->StaCfg.ReplayCounter[3], pAd->StaCfg.ReplayCounter[4],	pAd->StaCfg.ReplayCounter[5],
-				pAd->StaCfg.ReplayCounter[6], pAd->StaCfg.ReplayCounter[7], Len, pEap->KeyDesc.KeyData[1]));
-
-		}
-	}
-
-	// If timeout value is equaled to zero, it means always not be timeout.
-	// update local dls table entry
-	for (i= 0; i < MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-	{
-		if (pAd->StaCfg.DLSEntry[i].Valid && MAC_ADDR_EQUAL(pAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
-		{
-			if (bSTAKeyFrame)
-			{
-				PMAC_TABLE_ENTRY pEntry;
-
-				// STAKey frame, add pairwise key table
-				pAd->StaCfg.DLSEntry[i].Status = DLS_FINISH;
-				RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-
-				PairwiseKey.KeyLen = LEN_TKIP_EK;
-				NdisMoveMemory(PairwiseKey.Key, &pSTAKey[0], LEN_TKIP_EK);
-				NdisMoveMemory(PairwiseKey.TxMic, &pSTAKey[16], LEN_TKIP_RXMICK);
-				NdisMoveMemory(PairwiseKey.RxMic, &pSTAKey[24], LEN_TKIP_TXMICK);
-
-				PairwiseKey.CipherAlg = pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg;
-
-				pEntry = DlsEntryTableLookup(pAd, pAd->StaCfg.DLSEntry[i].MacAddr, TRUE);
-				//AsicAddKeyEntry(pAd, (USHORT)(i + 2), BSS0, 0, &PairwiseKey, TRUE, TRUE);	// reserve 0 for multicast, 1 for unicast
-				//AsicUpdateRxWCIDTable(pAd, (USHORT)(i + 2), pAddr);
-				// Add Pair-wise key to Asic
-#ifdef RT2870
-				{
-					RT_ADD_PAIRWISE_KEY_ENTRY KeyInfo;
-					COPY_MAC_ADDR(KeyInfo.MacAddr,pAd->StaCfg.DLSEntry[i].MacAddr);
-					KeyInfo.MacTabMatchWCID=pAd->StaCfg.DLSEntry[i].MacTabMatchWCID;
-					NdisMoveMemory(&KeyInfo.CipherKey,  &PairwiseKey,sizeof(CIPHER_KEY));
-					RTUSBEnqueueInternalCmd(pAd, RT_CMD_SET_KEY_TABLE, &KeyInfo, sizeof(RT_ADD_PAIRWISE_KEY_ENTRY));
-				}
-				{
-					PMAC_TABLE_ENTRY pDLSEntry;
-					pDLSEntry = DlsEntryTableLookup(pAd, pAd->StaCfg.DLSEntry[i].MacAddr, TRUE);
-					pDLSEntry->PairwiseKey.CipherAlg=PairwiseKey.CipherAlg;
-					RTUSBEnqueueInternalCmd(pAd, RT_CMD_SET_RX_WCID_TABLE, pDLSEntry, sizeof(MAC_TABLE_ENTRY));
-				}
-#endif // RT2870 //
-				NdisMoveMemory(&pEntry->PairwiseKey, &PairwiseKey, sizeof(CIPHER_KEY));
-				DBGPRINT(RT_DEBUG_TRACE,("DLS - Receive STAKey Message-1 (Peer STA MAC Address STAKey) \n"));
-
-				RTMPSendSTAKeyHandShake(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
-
-				DBGPRINT(RT_DEBUG_TRACE,("DLS - Finish STAKey handshake procedure (Initiator side)\n"));
-			}
-			else
-			{
-				// Data frame, update timeout value
-				if (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH)
-				{
-					pAd->StaCfg.DLSEntry[i].CountDownTimer = pAd->StaCfg.DLSEntry[i].TimeOut;
-					//AsicUpdateRxWCIDTable(pAd, (USHORT)(i + 2), pAddr);
-				}
-			}
-
-			bFindEntry = TRUE;
-		}
-	}
-
-	// update peer dls table entry
-	for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
-	{
-		if (pAd->StaCfg.DLSEntry[i].Valid && MAC_ADDR_EQUAL(pAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
-		{
-			if (bSTAKeyFrame)
-			{
-				PMAC_TABLE_ENTRY pEntry = NULL;
-
-				// STAKey frame, add pairwise key table, and send STAkey Msg-2
-				pAd->StaCfg.DLSEntry[i].Status = DLS_FINISH;
-				RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-
-				PairwiseKey.KeyLen = LEN_TKIP_EK;
-				NdisMoveMemory(PairwiseKey.Key, &pSTAKey[0], LEN_TKIP_EK);
-				NdisMoveMemory(PairwiseKey.TxMic, &pSTAKey[16], LEN_TKIP_RXMICK);
-				NdisMoveMemory(PairwiseKey.RxMic, &pSTAKey[24], LEN_TKIP_TXMICK);
-
-				PairwiseKey.CipherAlg = pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg;
-
-				pEntry = DlsEntryTableLookup(pAd, pAd->StaCfg.DLSEntry[i].MacAddr, TRUE);
-				//AsicAddKeyEntry(pAd, (USHORT)(i + 2), BSS0, 0, &PairwiseKey, TRUE, TRUE);	// reserve 0 for multicast, 1 for unicast
-				//AsicUpdateRxWCIDTable(pAd, (USHORT)(i + 2), pAddr);
-				// Add Pair-wise key to Asic
-#ifdef RT2870
-				{
-					RT_ADD_PAIRWISE_KEY_ENTRY KeyInfo;
-					COPY_MAC_ADDR(KeyInfo.MacAddr,pAd->StaCfg.DLSEntry[i].MacAddr);
-					KeyInfo.MacTabMatchWCID=pAd->StaCfg.DLSEntry[i].MacTabMatchWCID;
-					NdisMoveMemory(&KeyInfo.CipherKey,  &PairwiseKey,sizeof(CIPHER_KEY));
-					RTUSBEnqueueInternalCmd(pAd, RT_CMD_SET_KEY_TABLE, &KeyInfo, sizeof(RT_ADD_PAIRWISE_KEY_ENTRY));
-				}
-				{
-					PMAC_TABLE_ENTRY pDLSEntry;
-					pDLSEntry = DlsEntryTableLookup(pAd, pAd->StaCfg.DLSEntry[i].MacAddr, TRUE);
-					pDLSEntry->PairwiseKey.CipherAlg=PairwiseKey.CipherAlg;
-					RTUSBEnqueueInternalCmd(pAd, RT_CMD_SET_RX_WCID_TABLE, pDLSEntry, sizeof(MAC_TABLE_ENTRY));
-				}
-#endif // RT2870 //
-				NdisMoveMemory(&pEntry->PairwiseKey, &PairwiseKey, sizeof(CIPHER_KEY));
-				DBGPRINT(RT_DEBUG_TRACE,("DLS - Receive STAKey Message-1 (Initiator STA MAC Address STAKey)\n"));
-
-				// If support WPA or WPA2, start STAKey hand shake,
-				// If failed hand shake, just tear down peer DLS
-				if (RTMPSendSTAKeyHandShake(pAd, pAddr) != NDIS_STATUS_SUCCESS)
-				{
-					MLME_DLS_REQ_STRUCT	MlmeDlsReq;
-					USHORT				reason = REASON_QOS_CIPHER_NOT_SUPPORT;
-
-					pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-					pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-					DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-					MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-				}
-				else
-				{
-					DBGPRINT(RT_DEBUG_TRACE,("DLS - Finish STAKey handshake procedure (Peer side)\n"));
-				}
-			}
-			else
-			{
-				// Data frame, update timeout value
-				if (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH)
-				{
-					pAd->StaCfg.DLSEntry[i].CountDownTimer = pAd->StaCfg.DLSEntry[i].TimeOut;
-				}
-			}
-
-			bFindEntry = TRUE;
-		}
-	}
-
-
-	return bSTAKeyFrame;
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Check if the frame can be sent through DLS direct link interface
-
-	Arguments:
-		pAd		Pointer	to adapter
-
-	Return Value:
-		DLS entry index
-
-	Note:
-
-	========================================================================
-*/
-INT	RTMPCheckDLSFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN  PUCHAR          pDA)
-{
-	INT rval = -1;
-	INT	i;
-
-	if (!pAd->CommonCfg.bDLSCapable)
-		return rval;
-
-	if (!INFRA_ON(pAd))
-		return rval;
-
-	do{
-		// check local dls table entry
-		for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-		{
-			if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH) &&
-				MAC_ADDR_EQUAL(pDA, pAd->StaCfg.DLSEntry[i].MacAddr))
-			{
-				rval = i;
-				break;
-			}
-		}
-
-		// check peer dls table entry
-		for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
-		{
-			if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH) &&
-				MAC_ADDR_EQUAL(pDA, pAd->StaCfg.DLSEntry[i].MacAddr))
-			{
-				rval = i;
-				break;
-			}
-		}
-	} while (FALSE);
-
-	return rval;
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID RTMPSendDLSTearDownFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN  PUCHAR          pDA)
-{
-	PUCHAR			pOutBuffer = NULL;
-	NDIS_STATUS		NStatus;
-	HEADER_802_11	DlsTearDownHdr;
-	ULONG			FrameLen = 0;
-	USHORT			Reason = REASON_QOS_QSTA_LEAVING_QBSS;
-	UCHAR			Category = CATEGORY_DLS;
-	UCHAR			Action = ACTION_DLS_TEARDOWN;
-	UCHAR			i = 0;
-
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS) ||
-		RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS))
-		return;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Send DLS TearDown Frame \n"));
-
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-	if (NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("ASSOC - RTMPSendDLSTearDownFrame() allocate memory failed \n"));
-		return;
-	}
-
-	ActHeaderInit(pAd, &DlsTearDownHdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
-	MakeOutgoingFrame(pOutBuffer,				&FrameLen,
-					sizeof(HEADER_802_11),		&DlsTearDownHdr,
-					1,							&Category,
-					1,							&Action,
-					6,							pDA,
-					6,							pAd->CurrentAddress,
-					2,							&Reason,
-					END_OF_ARGS);
-
-	MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-	// Remove key in local dls table entry
-	for (i = 0; i < MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-	{
-		if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH)
-			&& MAC_ADDR_EQUAL(pDA, pAd->StaCfg.DLSEntry[i].MacAddr))
-		{
-			MacTableDeleteDlsEntry(pAd, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID, pAd->StaCfg.DLSEntry[i].MacAddr);
-		}
-	}
-
-	// Remove key in peer dls table entry
-	for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
-	{
-		if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH)
-			&& MAC_ADDR_EQUAL(pDA, pAd->StaCfg.DLSEntry[i].MacAddr))
-		{
-			MacTableDeleteDlsEntry(pAd, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID, pAd->StaCfg.DLSEntry[i].MacAddr);
-		}
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Send DLS TearDown Frame and remove key in (i=%d) \n", i));
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-NDIS_STATUS RTMPSendSTAKeyRequest(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pDA)
-{
-	UCHAR				Header802_3[14];
-	NDIS_STATUS			NStatus;
-	ULONG				FrameLen = 0;
-	EAPOL_PACKET		Packet;
-	UCHAR				Mic[16];
-	UCHAR				digest[80];
-	PUCHAR				pOutBuffer = NULL;
-	PNDIS_PACKET		pNdisPacket;
-	UCHAR				temp[64];
-	UCHAR				DlsPTK[80];
-
-	DBGPRINT(RT_DEBUG_TRACE,("DLS - RTMPSendSTAKeyRequest() to %02x:%02x:%02x:%02x:%02x:%02x\n", pDA[0], pDA[1], pDA[2], pDA[3], pDA[4], pDA[5]));
-
-	pAd->Sequence ++;
-	MAKE_802_3_HEADER(Header802_3, pAd->CommonCfg.Bssid, pAd->CurrentAddress, EAPOL);
-
-	// Zero message body
-	NdisZeroMemory(&Packet, sizeof(Packet));
-	Packet.ProVer = EAPOL_VER;
-	Packet.ProType    = EAPOLKey;
-	Packet.Body_Len[1]  = sizeof(KEY_DESCRIPTER) - MAX_LEN_OF_RSNIE + 6 + MAC_ADDR_LEN;		// data field contain KDE andPeer MAC address
-
-	// STAKey Message is as EAPOL-Key(1,1,0,0,G/0,0,0, MIC, 0,Peer MAC KDE)
-	if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK))
-    {
-        Packet.KeyDesc.Type = WPA1_KEY_DESC;
-    }
-    else if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK))
-    {
-        Packet.KeyDesc.Type = WPA2_KEY_DESC;
-    }
-
-	// Key descriptor version
-	Packet.KeyDesc.KeyInfo.KeyDescVer =
-		(((pAd->StaCfg.PairCipher == Ndis802_11Encryption3Enabled) || (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled)) ? (DESC_TYPE_AES) : (DESC_TYPE_TKIP));
-
-	Packet.KeyDesc.KeyInfo.KeyMic	= 1;
-	Packet.KeyDesc.KeyInfo.Secure	= 1;
-	Packet.KeyDesc.KeyInfo.Request	= 1;
-
-	Packet.KeyDesc.KeyDataLen[1]	= 12;
-
-	// use our own OUI to distinguish proprietary with standard.
-	Packet.KeyDesc.KeyData[0]		= 0xDD;
-	Packet.KeyDesc.KeyData[1]		= 0x0A;
-	Packet.KeyDesc.KeyData[2]		= 0x00;
-	Packet.KeyDesc.KeyData[3]		= 0x0C;
-	Packet.KeyDesc.KeyData[4]		= 0x43;
-	Packet.KeyDesc.KeyData[5]		= 0x03;
-	NdisMoveMemory(&Packet.KeyDesc.KeyData[6], pDA, MAC_ADDR_LEN);
-
-	NdisMoveMemory(Packet.KeyDesc.ReplayCounter, pAd->StaCfg.DlsReplayCounter, LEN_KEY_DESC_REPLAY);
-
-	// Allocate buffer for transmitting message
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);
-	if (NStatus	!= NDIS_STATUS_SUCCESS)
-		return NStatus;
-
-	// Prepare EAPOL frame for MIC calculation
-	// Be careful, only EAPOL frame is counted for MIC calculation
-	MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-		              Packet.Body_Len[1] + 4,    &Packet,
-		              END_OF_ARGS);
-
-	// use proprietary PTK
-	NdisZeroMemory(temp, 64);
-	NdisMoveMemory(temp, "IEEE802.11 WIRELESS ACCESS POINT", 32);
-	WpaCountPTK(pAd, temp, temp, pAd->CommonCfg.Bssid, temp, pAd->CurrentAddress, DlsPTK, LEN_PTK);
-
-	// calculate MIC
-	if (pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled)
-	{
-		// AES
-		NdisZeroMemory(digest,	sizeof(digest));
-		HMAC_SHA1(pOutBuffer, FrameLen, DlsPTK, LEN_EAP_MICK, digest);
-		NdisMoveMemory(Packet.KeyDesc.KeyMic, digest, LEN_KEY_DESC_MIC);
-	}
-	else
-	{
-		NdisZeroMemory(Mic,	sizeof(Mic));
-		hmac_md5(DlsPTK, LEN_EAP_MICK, pOutBuffer, FrameLen, Mic);
-		NdisMoveMemory(Packet.KeyDesc.KeyMic, Mic, LEN_KEY_DESC_MIC);
-	}
-
-	MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-	                  sizeof(Header802_3),	Header802_3,
-		              Packet.Body_Len[1] + 4,	&Packet,
-		              END_OF_ARGS);
-
-	NStatus = RTMPAllocateNdisPacket(pAd, &pNdisPacket, NULL, 0, pOutBuffer, FrameLen);
-	if (NStatus == NDIS_STATUS_SUCCESS)
-	{
-		RTMP_SET_PACKET_WCID(pNdisPacket, BSSID_WCID);
-		STASendPacket(pAd, pNdisPacket);
-		RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS);
-	}
-
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("RTMPSendSTAKeyRequest- Send STAKey request (NStatus=%x, FrameLen=%ld)\n", NStatus, FrameLen));
-
-	return NStatus;
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-NDIS_STATUS RTMPSendSTAKeyHandShake(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pDA)
-{
-	UCHAR				Header802_3[14];
-	NDIS_STATUS			NStatus;
-	ULONG				FrameLen = 0;
-	EAPOL_PACKET		Packet;
-	UCHAR				Mic[16];
-	UCHAR				digest[80];
-	PUCHAR				pOutBuffer = NULL;
-	PNDIS_PACKET		pNdisPacket;
-	UCHAR				temp[64];
-	UCHAR				DlsPTK[80];			// Due to dirver can not get PTK, use proprietary PTK
-
-	DBGPRINT(RT_DEBUG_TRACE,("DLS - RTMPSendSTAKeyHandShake() to %02x:%02x:%02x:%02x:%02x:%02x\n", pDA[0], pDA[1], pDA[2], pDA[3], pDA[4], pDA[5]));
-
-	pAd->Sequence ++;
-	MAKE_802_3_HEADER(Header802_3, pAd->CommonCfg.Bssid, pAd->CurrentAddress, EAPOL);
-
-	// Zero message body
-	NdisZeroMemory(&Packet, sizeof(Packet));
-	Packet.ProVer = EAPOL_VER;
-	Packet.ProType    = EAPOLKey;
-	Packet.Body_Len[1]  = sizeof(KEY_DESCRIPTER) - MAX_LEN_OF_RSNIE + 6 + MAC_ADDR_LEN;		// data field contain KDE and Peer MAC address
-
-	// STAKey Message is as EAPOL-Key(1,1,0,0,G/0,0,0, MIC, 0,Peer MAC KDE)
-	if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK))
-    {
-        Packet.KeyDesc.Type = WPA1_KEY_DESC;
-    }
-    else if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK))
-    {
-        Packet.KeyDesc.Type = WPA2_KEY_DESC;
-    }
-
-	// Key descriptor version
-	Packet.KeyDesc.KeyInfo.KeyDescVer =
-		(((pAd->StaCfg.PairCipher == Ndis802_11Encryption3Enabled) || (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled)) ? (DESC_TYPE_AES) : (DESC_TYPE_TKIP));
-
-	Packet.KeyDesc.KeyInfo.KeyMic	= 1;
-	Packet.KeyDesc.KeyInfo.Secure	= 1;
-
-	Packet.KeyDesc.KeyDataLen[1]	= 12;
-
-	// use our own OUI to distinguish proprietary with standard.
-	Packet.KeyDesc.KeyData[0]		= 0xDD;
-	Packet.KeyDesc.KeyData[1]		= 0x0A;
-	Packet.KeyDesc.KeyData[2]		= 0x00;
-	Packet.KeyDesc.KeyData[3]		= 0x0C;
-	Packet.KeyDesc.KeyData[4]		= 0x43;
-	Packet.KeyDesc.KeyData[5]		= 0x03;
-	NdisMoveMemory(&Packet.KeyDesc.KeyData[6], pDA, MAC_ADDR_LEN);
-
-	NdisMoveMemory(Packet.KeyDesc.ReplayCounter, pAd->StaCfg.DlsReplayCounter, LEN_KEY_DESC_REPLAY);
-
-	// Allocate buffer for transmitting message
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);
-	if (NStatus	!= NDIS_STATUS_SUCCESS)
-		return NStatus;
-
-	// Prepare EAPOL frame for MIC calculation
-	// Be careful, only EAPOL frame is counted for MIC calculation
-	MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-		              Packet.Body_Len[1] + 4,    &Packet,
-		              END_OF_ARGS);
-
-	// use proprietary PTK
-	NdisZeroMemory(temp, 64);
-	NdisMoveMemory(temp, "IEEE802.11 WIRELESS ACCESS POINT", 32);
-	WpaCountPTK(pAd, temp, temp, pAd->CommonCfg.Bssid, temp, pAd->CurrentAddress, DlsPTK, LEN_PTK);
-
-	// calculate MIC
-	if (pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled)
-	{
-		// AES
-		NdisZeroMemory(digest,	sizeof(digest));
-		HMAC_SHA1(pOutBuffer, FrameLen, DlsPTK, LEN_EAP_MICK, digest);
-		NdisMoveMemory(Packet.KeyDesc.KeyMic, digest, LEN_KEY_DESC_MIC);
-	}
-	else
-	{
-		NdisZeroMemory(Mic,	sizeof(Mic));
-		hmac_md5(DlsPTK, LEN_EAP_MICK, pOutBuffer, FrameLen, Mic);
-		NdisMoveMemory(Packet.KeyDesc.KeyMic, Mic, LEN_KEY_DESC_MIC);
-	}
-
-	MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-	                  sizeof(Header802_3),	Header802_3,
-		              Packet.Body_Len[1] + 4,	&Packet,
-		              END_OF_ARGS);
-
-	NStatus = RTMPAllocateNdisPacket(pAd, &pNdisPacket, NULL, 0, pOutBuffer, FrameLen);
-	if (NStatus == NDIS_STATUS_SUCCESS)
-	{
-		RTMP_SET_PACKET_WCID(pNdisPacket, BSSID_WCID);
-		STASendPacket(pAd, pNdisPacket);
-		RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS);
-	}
-
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("RTMPSendSTAKeyHandShake- Send STAKey Message-2 (NStatus=%x, FrameLen=%ld)\n", NStatus, FrameLen));
-
-	return NStatus;
-}
-
-VOID DlsTimeoutAction(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3)
-{
-	MLME_DLS_REQ_STRUCT		MlmeDlsReq;
-	USHORT					reason;
-	PRT_802_11_DLS			pDLS = (PRT_802_11_DLS)FunctionContext;
-	PRTMP_ADAPTER			pAd = pDLS->pAd;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("DlsTimeout - Tear down DLS links (%02x:%02x:%02x:%02x:%02x:%02x)\n",
-		pDLS->MacAddr[0], pDLS->MacAddr[1], pDLS->MacAddr[2], pDLS->MacAddr[3], pDLS->MacAddr[4], pDLS->MacAddr[5]));
-
-	if ((pDLS) && (pDLS->Valid))
-	{
-		reason			= REASON_QOS_REQUEST_TIMEOUT;
-		pDLS->Valid		= FALSE;
-		pDLS->Status	= DLS_NONE;
-		DlsParmFill(pAd, &MlmeDlsReq, pDLS, reason);
-		MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-		RT28XX_MLME_HANDLER(pAd);
-	}
-}
-
-/*
-================================================================
-Description : because DLS and CLI share the same WCID table in ASIC.
-Mesh entry also insert to pAd->MacTab.content[].  Such is marked as ValidAsDls = TRUE.
-Also fills the pairwise key.
-Because front MAX_AID_BA entries have direct mapping to BAEntry, which is only used as CLI. So we insert Dls
-from index MAX_AID_BA.
-================================================================
-*/
-MAC_TABLE_ENTRY *MacTableInsertDlsEntry(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR	pAddr,
-	IN  UINT	DlsEntryIdx)
-{
-	PMAC_TABLE_ENTRY pEntry = NULL;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("====> MacTableInsertDlsEntry\n"));
-	// if FULL, return
-	if (pAd->MacTab.Size >= MAX_LEN_OF_MAC_TABLE)
-		return NULL;
-
-	do
-	{
-		if((pEntry = DlsEntryTableLookup(pAd, pAddr, TRUE)) != NULL)
-			break;
-
-		// allocate one MAC entry
-		pEntry = MacTableInsertEntry(pAd, pAddr, DlsEntryIdx + MIN_NET_DEVICE_FOR_DLS, TRUE);
-		if (pEntry)
-		{
-			pAd->StaCfg.DLSEntry[DlsEntryIdx].MacTabMatchWCID = pEntry->Aid;
-			pEntry->MatchDlsEntryIdx = DlsEntryIdx;
-			pEntry->AuthMode = pAd->StaCfg.AuthMode;
-			pEntry->WepStatus = pAd->StaCfg.WepStatus;
-			pEntry->PortSecured = WPA_802_1X_PORT_SECURED;
-
-			DBGPRINT(RT_DEBUG_TRACE, ("MacTableInsertDlsEntry - allocate entry #%d, Total= %d\n",pEntry->Aid, pAd->MacTab.Size));
-
-			// If legacy WEP is used, set pair-wise cipherAlg into WCID attribute table for this entry
-			if ((pEntry->ValidAsDls) && (pEntry->WepStatus == Ndis802_11WEPEnabled))
-			{
-				UCHAR KeyIdx = 0;
-				UCHAR CipherAlg = 0;
-
-				KeyIdx	= pAd->StaCfg.DefaultKeyId;
-
-				CipherAlg 	= pAd->SharedKey[BSS0][KeyIdx].CipherAlg;
-
-				RTMPAddWcidAttributeEntry(pAd,
-											BSS0,
-											pAd->StaCfg.DefaultKeyId,
-											pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg,
-											pEntry);
-			}
-
-			break;
-		}
-	} while(FALSE);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<==== MacTableInsertDlsEntry\n"));
-
-	return pEntry;
-}
-
-
-/*
-	==========================================================================
-	Description:
-		Delete all Mesh Entry in pAd->MacTab
-	==========================================================================
- */
-BOOLEAN MacTableDeleteDlsEntry(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT wcid,
-	IN PUCHAR pAddr)
-{
-	DBGPRINT(RT_DEBUG_TRACE, ("====> MacTableDeleteDlsEntry\n"));
-
-	if (!VALID_WCID(wcid))
-		return FALSE;
-
-	MacTableDeleteEntry(pAd, wcid, pAddr);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<==== MacTableDeleteDlsEntry\n"));
-
-	return TRUE;
-}
-
-MAC_TABLE_ENTRY *DlsEntryTableLookup(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR	pAddr,
-	IN BOOLEAN	bResetIdelCount)
-{
-	ULONG HashIdx;
-	MAC_TABLE_ENTRY *pEntry = NULL;
-
-	RTMP_SEM_LOCK(&pAd->MacTabLock);
-	HashIdx = MAC_ADDR_HASH_INDEX(pAddr);
-	pEntry = pAd->MacTab.Hash[HashIdx];
-
-	while (pEntry)
-	{
-		if ((pEntry->ValidAsDls == TRUE)
-			&& MAC_ADDR_EQUAL(pEntry->Addr, pAddr))
-		{
-			if(bResetIdelCount)
-				pEntry->NoDataIdleCount = 0;
-			break;
-		}
-		else
-			pEntry = pEntry->pNext;
-	}
-
-	RTMP_SEM_UNLOCK(&pAd->MacTabLock);
-	return pEntry;
-}
-
-MAC_TABLE_ENTRY *DlsEntryTableLookupByWcid(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR	wcid,
-	IN PUCHAR	pAddr,
-	IN BOOLEAN	bResetIdelCount)
-{
-	ULONG DLsIndex;
-	PMAC_TABLE_ENTRY pCurEntry = NULL;
-	PMAC_TABLE_ENTRY pEntry = NULL;
-
-	if (!VALID_WCID(wcid))
-		return NULL;
-
-	RTMP_SEM_LOCK(&pAd->MacTabLock);
-
-	do
-	{
-		pCurEntry = &pAd->MacTab.Content[wcid];
-
-		DLsIndex = 0xff;
-		if ((pCurEntry) && (pCurEntry->ValidAsDls== TRUE))
-		{
-			DLsIndex = pCurEntry->MatchDlsEntryIdx;
-		}
-
-		if (DLsIndex == 0xff)
-			break;
-
-		if (MAC_ADDR_EQUAL(pCurEntry->Addr, pAddr))
-		{
-			if(bResetIdelCount)
-				pCurEntry->NoDataIdleCount = 0;
-			pEntry = pCurEntry;
-			break;
-		}
-	} while(FALSE);
-
-	RTMP_SEM_UNLOCK(&pAd->MacTabLock);
-
-	return pEntry;
-}
-
-INT Set_DlsEntryInfo_Display_Proc(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR arg)
-{
-	INT i;
-
-	printk("\n%-19s%-8s\n", "MAC", "TIMEOUT\n");
-	for (i=0; i<MAX_NUM_OF_DLS_ENTRY; i++)
-	{
-		if ((pAd->StaCfg.DLSEntry[i].Valid) && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
-		{
-			PMAC_TABLE_ENTRY pEntry = &pAd->MacTab.Content[pAd->StaCfg.DLSEntry[i].MacTabMatchWCID];
-
-			printk("%02x:%02x:%02x:%02x:%02x:%02x  ",
-				pAd->StaCfg.DLSEntry[i].MacAddr[0], pAd->StaCfg.DLSEntry[i].MacAddr[1], pAd->StaCfg.DLSEntry[i].MacAddr[2],
-				pAd->StaCfg.DLSEntry[i].MacAddr[3], pAd->StaCfg.DLSEntry[i].MacAddr[4], pAd->StaCfg.DLSEntry[i].MacAddr[5]);
-			printk("%-8d\n", pAd->StaCfg.DLSEntry[i].TimeOut);
-
-			printk("\n");
-			printk("\n%-19s%-4s%-4s%-4s%-4s%-7s%-7s%-7s","MAC", "AID", "BSS", "PSM", "WMM", "RSSI0", "RSSI1", "RSSI2");
-#ifdef DOT11_N_SUPPORT
-			printk("%-8s%-10s%-6s%-6s%-6s%-6s", "MIMOPS", "PhMd", "BW", "MCS", "SGI", "STBC");
-#endif // DOT11_N_SUPPORT //
-			printk("\n%02X:%02X:%02X:%02X:%02X:%02X  ",
-				pEntry->Addr[0], pEntry->Addr[1], pEntry->Addr[2],
-				pEntry->Addr[3], pEntry->Addr[4], pEntry->Addr[5]);
-			printk("%-4d", (int)pEntry->Aid);
-			printk("%-4d", (int)pEntry->apidx);
-			printk("%-4d", (int)pEntry->PsMode);
-			printk("%-4d", (int)CLIENT_STATUS_TEST_FLAG(pEntry, fCLIENT_STATUS_WMM_CAPABLE));
-			printk("%-7d", pEntry->RssiSample.AvgRssi0);
-			printk("%-7d", pEntry->RssiSample.AvgRssi1);
-			printk("%-7d", pEntry->RssiSample.AvgRssi2);
-#ifdef DOT11_N_SUPPORT
-			printk("%-8d", (int)pEntry->MmpsMode);
-			printk("%-10s", GetPhyMode(pEntry->HTPhyMode.field.MODE));
-			printk("%-6s", GetBW(pEntry->HTPhyMode.field.BW));
-			printk("%-6d", pEntry->HTPhyMode.field.MCS);
-			printk("%-6d", pEntry->HTPhyMode.field.ShortGI);
-			printk("%-6d", pEntry->HTPhyMode.field.STBC);
-#endif // DOT11_N_SUPPORT //
-			printk("%-10d, %d, %d%%\n", pEntry->DebugFIFOCount, pEntry->DebugTxCount,
-						(pEntry->DebugTxCount) ? ((pEntry->DebugTxCount-pEntry->DebugFIFOCount)*100/pEntry->DebugTxCount) : 0);
-			printk("\n");
-
-		}
-	}
-
-	return TRUE;
-}
-
-INT	Set_DlsAddEntry_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-    UCHAR	mac[MAC_ADDR_LEN];
-	USHORT	Timeout;
-	char *token, sepValue[] = ":", DASH = '-';
-	INT i;
-    RT_802_11_DLS	Dls;
-
-    if(strlen(arg) < 19)  //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and timeout value in decimal format.
-		return FALSE;
-
-	token = strchr(arg, DASH);
-	if ((token != NULL) && (strlen(token)>1))
-	{
-		Timeout = simple_strtol((token+1), 0, 10);
-
-		*token = '\0';
-		for (i = 0, token = rstrtok(arg, &sepValue[0]); token; token = rstrtok(NULL, &sepValue[0]), i++)
-		{
-			if((strlen(token) != 2) || (!isxdigit(*token)) || (!isxdigit(*(token+1))))
-				return FALSE;
-			AtoH(token, (PUCHAR)(&mac[i]), 1);
-		}
-		if(i != 6)
-			return FALSE;
-
-	    printk("\n%02x:%02x:%02x:%02x:%02x:%02x-%d", mac[0], mac[1],
-	           mac[2], mac[3], mac[4], mac[5], (int)Timeout);
-
-		NdisZeroMemory(&Dls, sizeof(RT_802_11_DLS));
-		Dls.TimeOut = Timeout;
-		COPY_MAC_ADDR(Dls.MacAddr, mac);
-		Dls.Valid = 1;
-
-		MlmeEnqueue(pAd,
-					MLME_CNTL_STATE_MACHINE,
-					RT_OID_802_11_SET_DLS_PARAM,
-					sizeof(RT_802_11_DLS),
-					&Dls);
-
-		return TRUE;
-	}
-
-	return FALSE;
-
-}
-
-INT	Set_DlsTearDownEntry_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UCHAR			macAddr[MAC_ADDR_LEN];
-	CHAR			*value;
-	INT				i;
-	RT_802_11_DLS	Dls;
-
-	if(strlen(arg) != 17)  //Mac address acceptable format 01:02:03:04:05:06 length 17
-		return FALSE;
-
-	for (i=0, value = rstrtok(arg,":"); value; value = rstrtok(NULL,":"))
-	{
-		if((strlen(value) != 2) || (!isxdigit(*value)) || (!isxdigit(*(value+1))) )
-			return FALSE;  //Invalid
-
-		AtoH(value, &macAddr[i++], 2);
-	}
-
-	printk("\n%02x:%02x:%02x:%02x:%02x:%02x", macAddr[0], macAddr[1],
-	           macAddr[2], macAddr[3], macAddr[4], macAddr[5]);
-
-	NdisZeroMemory(&Dls, sizeof(RT_802_11_DLS));
-	COPY_MAC_ADDR(Dls.MacAddr, macAddr);
-	Dls.Valid = 0;
-
-	MlmeEnqueue(pAd,
-				MLME_CNTL_STATE_MACHINE,
-				RT_OID_802_11_SET_DLS_PARAM,
-				sizeof(RT_802_11_DLS),
-				&Dls);
-
-	return TRUE;
-}
-
diff --git a/drivers/staging/rt2870/sta/rtmp_data.c b/drivers/staging/rt2870/sta/rtmp_data.c
index 9942ecaf5e2..b67e06952bc 100644
--- a/drivers/staging/rt2870/sta/rtmp_data.c
+++ b/drivers/staging/rt2870/sta/rtmp_data.c
@@ -1,2619 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	rtmp_data.c
-
-	Abstract:
-	Data path subroutines
-
-	Revision History:
-	Who 		When			What
-	--------	----------		----------------------------------------------
-	John		      Aug/17/04		major modification for RT2561/2661
-	Jan Lee	      Mar/17/06		major modification for RT2860 New Ring Design
-*/
-#include "../rt_config.h"
-
-
-VOID STARxEAPOLFrameIndicate(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MAC_TABLE_ENTRY	*pEntry,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID)
-{
-	PRT28XX_RXD_STRUC	pRxD = &(pRxBlk->RxD);
-	PRXWI_STRUC		pRxWI = pRxBlk->pRxWI;
-	UCHAR			*pTmpBuf;
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-	if (pAd->StaCfg.WpaSupplicantUP)
-	{
-		// All EAPoL frames have to pass to upper layer (ex. WPA_SUPPLICANT daemon)
-		// TBD : process fragmented EAPol frames
-		{
-			// In 802.1x mode, if the received frame is EAP-SUCCESS packet, turn on the PortSecured variable
-			if ( pAd->StaCfg.IEEE8021X == TRUE &&
-				 (EAP_CODE_SUCCESS == WpaCheckEapCode(pAd, pRxBlk->pData, pRxBlk->DataSize, LENGTH_802_1_H)))
-			{
-				PUCHAR	Key;
-				UCHAR 	CipherAlg;
-				int     idx = 0;
-
-				DBGPRINT_RAW(RT_DEBUG_TRACE, ("Receive EAP-SUCCESS Packet\n"));
-				//pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-				STA_PORT_SECURED(pAd);
-
-                if (pAd->StaCfg.IEEE8021x_required_keys == FALSE)
-                {
-                    idx = pAd->StaCfg.DesireSharedKeyId;
-                    CipherAlg = pAd->StaCfg.DesireSharedKey[idx].CipherAlg;
-					Key = pAd->StaCfg.DesireSharedKey[idx].Key;
-
-                    if (pAd->StaCfg.DesireSharedKey[idx].KeyLen > 0)
-    				{
-#ifdef RT2870
-						union
-						{
-							char buf[sizeof(NDIS_802_11_WEP)+MAX_LEN_OF_KEY- 1];
-							NDIS_802_11_WEP keyinfo;
-						}  WepKey;
-						int len;
-
-
-						NdisZeroMemory(&WepKey, sizeof(WepKey));
-						len =pAd->StaCfg.DesireSharedKey[idx].KeyLen;
-
-						NdisMoveMemory(WepKey.keyinfo.KeyMaterial,
-							pAd->StaCfg.DesireSharedKey[idx].Key,
-							pAd->StaCfg.DesireSharedKey[idx].KeyLen);
-
-						WepKey.keyinfo.KeyIndex = 0x80000000 + idx;
-						WepKey.keyinfo.KeyLength = len;
-						pAd->SharedKey[BSS0][idx].KeyLen =(UCHAR) (len <= 5 ? 5 : 13);
-
-						pAd->IndicateMediaState = NdisMediaStateConnected;
-						pAd->ExtraInfo = GENERAL_LINK_UP;
-						// need to enqueue cmd to thread
-						RTUSBEnqueueCmdFromNdis(pAd, OID_802_11_ADD_WEP, TRUE, &WepKey, sizeof(WepKey.keyinfo) + len - 1);
-#endif // RT2870 //
-						// For Preventing ShardKey Table is cleared by remove key procedure.
-    					pAd->SharedKey[BSS0][idx].CipherAlg = CipherAlg;
-						pAd->SharedKey[BSS0][idx].KeyLen = pAd->StaCfg.DesireSharedKey[idx].KeyLen;
-						NdisMoveMemory(pAd->SharedKey[BSS0][idx].Key,
-									   pAd->StaCfg.DesireSharedKey[idx].Key,
-									   pAd->StaCfg.DesireSharedKey[idx].KeyLen);
-    				}
-				}
-			}
-
-			Indicate_Legacy_Packet(pAd, pRxBlk, FromWhichBSSID);
-			return;
-		}
-	}
-	else
-#endif // WPA_SUPPLICANT_SUPPORT //
-	{
-		// Special DATA frame that has to pass to MLME
-		//	 1. Cisco Aironet frames for CCX2. We need pass it to MLME for special process
-		//	 2. EAPOL handshaking frames when driver supplicant enabled, pass to MLME for special process
-		{
-			pTmpBuf = pRxBlk->pData - LENGTH_802_11;
-			NdisMoveMemory(pTmpBuf, pRxBlk->pHeader, LENGTH_802_11);
-			REPORT_MGMT_FRAME_TO_MLME(pAd, pRxWI->WirelessCliID, pTmpBuf, pRxBlk->DataSize + LENGTH_802_11, pRxWI->RSSI0, pRxWI->RSSI1, pRxWI->RSSI2, pRxD->PlcpSignal);
-			DBGPRINT_RAW(RT_DEBUG_TRACE, ("!!! report EAPOL/AIRONET DATA to MLME (len=%d) !!!\n", pRxBlk->DataSize));
-		}
-	}
-
-	RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
-	return;
-
-}
-
-VOID STARxDataFrameAnnounce(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MAC_TABLE_ENTRY	*pEntry,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID)
-{
-
-	// non-EAP frame
-	if (!RTMPCheckWPAframe(pAd, pEntry, pRxBlk->pData, pRxBlk->DataSize, FromWhichBSSID))
-	{
-		{
-			// drop all non-EAP DATA frame before
-			// this client's Port-Access-Control is secured
-			if (pRxBlk->pHeader->FC.Wep)
-			{
-				// unsupported cipher suite
-				if (pAd->StaCfg.WepStatus == Ndis802_11EncryptionDisabled)
-				{
-					// release packet
-					RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
-					return;
-				}
-			}
-			else
-			{
-				// encryption in-use but receive a non-EAPOL clear text frame, drop it
-				if ((pAd->StaCfg.WepStatus != Ndis802_11EncryptionDisabled) &&
-					(pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
-				{
-					// release packet
-					RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
-					return;
-				}
-			}
-		}
-		RX_BLK_CLEAR_FLAG(pRxBlk, fRX_EAP);
-		if (!RX_BLK_TEST_FLAG(pRxBlk, fRX_ARALINK))
-		{
-			// Normal legacy, AMPDU or AMSDU
-			CmmRxnonRalinkFrameIndicate(pAd, pRxBlk, FromWhichBSSID);
-
-		}
-		else
-		{
-			// ARALINK
-			CmmRxRalinkFrameIndicate(pAd, pEntry, pRxBlk, FromWhichBSSID);
-		}
-#ifdef QOS_DLS_SUPPORT
-		RX_BLK_CLEAR_FLAG(pRxBlk, fRX_DLS);
-#endif // QOS_DLS_SUPPORT //
-	}
-	else
-	{
-		RX_BLK_SET_FLAG(pRxBlk, fRX_EAP);
-#ifdef DOT11_N_SUPPORT
-		if (RX_BLK_TEST_FLAG(pRxBlk, fRX_AMPDU) && (pAd->CommonCfg.bDisableReordering == 0))
-		{
-			Indicate_AMPDU_Packet(pAd, pRxBlk, FromWhichBSSID);
-		}
-		else
-#endif // DOT11_N_SUPPORT //
-		{
-			// Determin the destination of the EAP frame
-			//  to WPA state machine or upper layer
-			STARxEAPOLFrameIndicate(pAd, pEntry, pRxBlk, FromWhichBSSID);
-		}
-	}
-}
-
-
-// For TKIP frame, calculate the MIC value
-BOOLEAN STACheckTkipMICValue(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MAC_TABLE_ENTRY	*pEntry,
-	IN	RX_BLK			*pRxBlk)
-{
-	PHEADER_802_11	pHeader = pRxBlk->pHeader;
-	UCHAR			*pData = pRxBlk->pData;
-	USHORT			DataSize = pRxBlk->DataSize;
-	UCHAR			UserPriority = pRxBlk->UserPriority;
-	PCIPHER_KEY		pWpaKey;
-	UCHAR			*pDA, *pSA;
-
-	pWpaKey = &pAd->SharedKey[BSS0][pRxBlk->pRxWI->KeyIndex];
-
-	pDA = pHeader->Addr1;
-	if (RX_BLK_TEST_FLAG(pRxBlk, fRX_INFRA))
-	{
-		pSA = pHeader->Addr3;
-	}
-	else
-	{
-		pSA = pHeader->Addr2;
-	}
-
-	if (RTMPTkipCompareMICValue(pAd,
-								pData,
-								pDA,
-								pSA,
-								pWpaKey->RxMic,
-								UserPriority,
-								DataSize) == FALSE)
-	{
-		DBGPRINT_RAW(RT_DEBUG_ERROR,("Rx MIC Value error 2\n"));
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-		if (pAd->StaCfg.WpaSupplicantUP)
-		{
-			WpaSendMicFailureToWpaSupplicant(pAd, (pWpaKey->Type == PAIRWISEKEY) ? TRUE : FALSE);
-		}
-		else
-#endif // WPA_SUPPLICANT_SUPPORT //
-		{
-			RTMPReportMicError(pAd, pWpaKey);
-		}
-
-		// release packet
-		RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
-		return FALSE;
-	}
-
-	return TRUE;
-}
-
-
-//
-// All Rx routines use RX_BLK structure to hande rx events
-// It is very important to build pRxBlk attributes
-//  1. pHeader pointer to 802.11 Header
-//  2. pData pointer to payload including LLC (just skip Header)
-//  3. set payload size including LLC to DataSize
-//  4. set some flags with RX_BLK_SET_FLAG()
-//
-VOID STAHandleRxDataFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk)
-{
-	PRT28XX_RXD_STRUC				pRxD = &(pRxBlk->RxD);
-	PRXWI_STRUC						pRxWI = pRxBlk->pRxWI;
-	PHEADER_802_11					pHeader = pRxBlk->pHeader;
-	PNDIS_PACKET					pRxPacket = pRxBlk->pRxPacket;
-	BOOLEAN 						bFragment = FALSE;
-	MAC_TABLE_ENTRY	    			*pEntry = NULL;
-	UCHAR							FromWhichBSSID = BSS0;
-	UCHAR                           UserPriority = 0;
-
-	{
-		// before LINK UP, all DATA frames are rejected
-		if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
-		{
-			// release packet
-			RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
-			return;
-		}
-
-#ifdef QOS_DLS_SUPPORT
-		//if ((pHeader->FC.FrDs == 0) && (pHeader->FC.ToDs == 0))
-		if (RTMPRcvFrameDLSCheck(pAd, pHeader, pRxWI->MPDUtotalByteCount, pRxD))
-		{
-			return;
-		}
-#endif // QOS_DLS_SUPPORT //
-
-		// Drop not my BSS frames
-		if (pRxD->MyBss == 0)
-		{
-			{
-				// release packet
-				RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
-				return;
-			}
-		}
-
-		pAd->RalinkCounters.RxCountSinceLastNULL++;
-		if (pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable && (pHeader->FC.SubType & 0x08))
-		{
-			UCHAR *pData;
-			DBGPRINT(RT_DEBUG_TRACE,("bAPSDCapable\n"));
-
-			// Qos bit 4
-			pData = (PUCHAR)pHeader + LENGTH_802_11;
-			if ((*pData >> 4) & 0x01)
-			{
-				DBGPRINT(RT_DEBUG_TRACE,("RxDone- Rcv EOSP frame, driver may fall into sleep\n"));
-				pAd->CommonCfg.bInServicePeriod = FALSE;
-
-				// Force driver to fall into sleep mode when rcv EOSP frame
-				if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
-				{
-					USHORT  TbttNumToNextWakeUp;
-					USHORT  NextDtim = pAd->StaCfg.DtimPeriod;
-					ULONG   Now;
-
-					NdisGetSystemUpTime(&Now);
-					NextDtim -= (USHORT)(Now - pAd->StaCfg.LastBeaconRxTime)/pAd->CommonCfg.BeaconPeriod;
-
-					TbttNumToNextWakeUp = pAd->StaCfg.DefaultListenCount;
-					if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM) && (TbttNumToNextWakeUp > NextDtim))
-						TbttNumToNextWakeUp = NextDtim;
-
-					MlmeSetPsmBit(pAd, PWR_SAVE);
-					// if WMM-APSD is failed, try to disable following line
-					AsicSleepThenAutoWakeup(pAd, TbttNumToNextWakeUp);
-				}
-			}
-
-			if ((pHeader->FC.MoreData) && (pAd->CommonCfg.bInServicePeriod))
-			{
-				DBGPRINT(RT_DEBUG_TRACE,("Sending another trigger frame when More Data bit is set to 1\n"));
-			}
-		}
-
-		// Drop NULL, CF-ACK(no data), CF-POLL(no data), and CF-ACK+CF-POLL(no data) data frame
-		if ((pHeader->FC.SubType & 0x04)) // bit 2 : no DATA
-		{
-			// release packet
-			RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
-			return;
-		}
-
-	    // Drop not my BSS frame (we can not only check the MyBss bit in RxD)
-#ifdef QOS_DLS_SUPPORT
-	    if (!pAd->CommonCfg.bDLSCapable)
-	    {
-#endif // QOS_DLS_SUPPORT //
-		if (INFRA_ON(pAd))
-		{
-			// Infrastructure mode, check address 2 for BSSID
-			if (!RTMPEqualMemory(&pHeader->Addr2, &pAd->CommonCfg.Bssid, 6))
-			{
-				// Receive frame not my BSSID
-	            // release packet
-	            RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
-				return;
-			}
-		}
-		else	// Ad-Hoc mode or Not associated
-		{
-			// Ad-Hoc mode, check address 3 for BSSID
-			if (!RTMPEqualMemory(&pHeader->Addr3, &pAd->CommonCfg.Bssid, 6))
-			{
-				// Receive frame not my BSSID
-	            // release packet
-	            RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
-				return;
-			}
-		}
-#ifdef QOS_DLS_SUPPORT
-	    }
-#endif // QOS_DLS_SUPPORT //
-
-		//
-		// find pEntry
-		//
-		if (pRxWI->WirelessCliID < MAX_LEN_OF_MAC_TABLE)
-		{
-			pEntry = &pAd->MacTab.Content[pRxWI->WirelessCliID];
-		}
-		else
-		{
-			// 1. release packet if infra mode
-			// 2. new a pEntry if ad-hoc mode
-			RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
-			return;
-		}
-
-		// infra or ad-hoc
-		if (INFRA_ON(pAd))
-		{
-			RX_BLK_SET_FLAG(pRxBlk, fRX_INFRA);
-#ifdef QOS_DLS_SUPPORT
-			if ((pHeader->FC.FrDs == 0) && (pHeader->FC.ToDs == 0))
-				RX_BLK_SET_FLAG(pRxBlk, fRX_DLS);
-			else
-#endif // QOS_DLS_SUPPORT //
-			ASSERT(pRxWI->WirelessCliID == BSSID_WCID);
-		}
-
-		// check Atheros Client
-		if ((pEntry->bIAmBadAtheros == FALSE) &&  (pRxD->AMPDU == 1) && (pHeader->FC.Retry ))
-		{
-			pEntry->bIAmBadAtheros = TRUE;
-			pAd->CommonCfg.IOTestParm.bCurrentAtheros = TRUE;
-			pAd->CommonCfg.IOTestParm.bLastAtheros = TRUE;
-			if (!STA_AES_ON(pAd))
-			{
-				AsicUpdateProtect(pAd, 8, ALLN_SETPROTECT, TRUE, FALSE);
-			}
-		}
-	}
-
-	pRxBlk->pData = (UCHAR *)pHeader;
-
-	//
-	// update RxBlk->pData, DataSize
-	// 802.11 Header, QOS, HTC, Hw Padding
-	//
-
-	// 1. skip 802.11 HEADER
-	{
-		pRxBlk->pData += LENGTH_802_11;
-		pRxBlk->DataSize -= LENGTH_802_11;
-	}
-
-	// 2. QOS
-	if (pHeader->FC.SubType & 0x08)
-	{
-		RX_BLK_SET_FLAG(pRxBlk, fRX_QOS);
-		UserPriority = *(pRxBlk->pData) & 0x0f;
-		// bit 7 in QoS Control field signals the HT A-MSDU format
-		if ((*pRxBlk->pData) & 0x80)
-		{
-			RX_BLK_SET_FLAG(pRxBlk, fRX_AMSDU);
-		}
-
-		// skip QOS contorl field
-		pRxBlk->pData += 2;
-		pRxBlk->DataSize -=2;
-	}
-	pRxBlk->UserPriority = UserPriority;
-
-	// 3. Order bit: A-Ralink or HTC+
-	if (pHeader->FC.Order)
-	{
-#ifdef AGGREGATION_SUPPORT
-		if ((pRxWI->PHYMODE <= MODE_OFDM) && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED)))
-		{
-			RX_BLK_SET_FLAG(pRxBlk, fRX_ARALINK);
-		}
-		else
-#endif
-		{
-#ifdef DOT11_N_SUPPORT
-			RX_BLK_SET_FLAG(pRxBlk, fRX_HTC);
-			// skip HTC contorl field
-			pRxBlk->pData += 4;
-			pRxBlk->DataSize -= 4;
-#endif // DOT11_N_SUPPORT //
-		}
-	}
-
-	// 4. skip HW padding
-	if (pRxD->L2PAD)
-	{
-		// just move pData pointer
-		// because DataSize excluding HW padding
-		RX_BLK_SET_FLAG(pRxBlk, fRX_PAD);
-		pRxBlk->pData += 2;
-	}
-
-#ifdef DOT11_N_SUPPORT
-	if (pRxD->BA)
-	{
-		RX_BLK_SET_FLAG(pRxBlk, fRX_AMPDU);
-	}
-#endif // DOT11_N_SUPPORT //
-
-
-	//
-	// Case I  Process Broadcast & Multicast data frame
-	//
-	if (pRxD->Bcast || pRxD->Mcast)
-	{
-		INC_COUNTER64(pAd->WlanCounters.MulticastReceivedFrameCount);
-
-		// Drop Mcast/Bcast frame with fragment bit on
-		if (pHeader->FC.MoreFrag)
-		{
-			// release packet
-			RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
-			return;
-		}
-
-		// Filter out Bcast frame which AP relayed for us
-		if (pHeader->FC.FrDs && MAC_ADDR_EQUAL(pHeader->Addr3, pAd->CurrentAddress))
-		{
-			// release packet
-			RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
-			return;
-		}
-
-		Indicate_Legacy_Packet(pAd, pRxBlk, FromWhichBSSID);
-		return;
-	}
-	else if (pRxD->U2M)
-	{
-		pAd->LastRxRate = (USHORT)((pRxWI->MCS) + (pRxWI->BW <<7) + (pRxWI->ShortGI <<8)+ (pRxWI->PHYMODE <<14)) ;
-
-
-#ifdef QOS_DLS_SUPPORT
-        if (RX_BLK_TEST_FLAG(pRxBlk, fRX_DLS))
-		{
-			MAC_TABLE_ENTRY *pDlsEntry = NULL;
-
-			pDlsEntry = DlsEntryTableLookupByWcid(pAd, pRxWI->WirelessCliID, pHeader->Addr2, TRUE);
-										                        if(pDlsEntry)
-			Update_Rssi_Sample(pAd, &pDlsEntry->RssiSample, pRxWI);
-		}
-		else
-#endif // QOS_DLS_SUPPORT //
-		if (ADHOC_ON(pAd))
-		{
-			pEntry = MacTableLookup(pAd, pHeader->Addr2);
-			if (pEntry)
-				Update_Rssi_Sample(pAd, &pEntry->RssiSample, pRxWI);
-		}
-
-
-		Update_Rssi_Sample(pAd, &pAd->StaCfg.RssiSample, pRxWI);
-
-		pAd->StaCfg.LastSNR0 = (UCHAR)(pRxWI->SNR0);
-		pAd->StaCfg.LastSNR1 = (UCHAR)(pRxWI->SNR1);
-
-		pAd->RalinkCounters.OneSecRxOkDataCnt++;
-
-
-    	if (!((pHeader->Frag == 0) && (pHeader->FC.MoreFrag == 0)))
-    	{
-    		// re-assemble the fragmented packets
-    		// return complete frame (pRxPacket) or NULL
-    		bFragment = TRUE;
-    		pRxPacket = RTMPDeFragmentDataFrame(pAd, pRxBlk);
-    	}
-
-    	if (pRxPacket)
-    	{
-			pEntry = &pAd->MacTab.Content[pRxWI->WirelessCliID];
-
-    		// process complete frame
-    		if (bFragment && (pRxD->Decrypted) && (pEntry->WepStatus == Ndis802_11Encryption2Enabled))
-    		{
-				// Minus MIC length
-				pRxBlk->DataSize -= 8;
-
-    			// For TKIP frame, calculate the MIC value
-    			if (STACheckTkipMICValue(pAd, pEntry, pRxBlk) == FALSE)
-    			{
-    				return;
-    			}
-    		}
-
-    		STARxDataFrameAnnounce(pAd, pEntry, pRxBlk, FromWhichBSSID);
-			return;
-    	}
-    	else
-    	{
-    		// just return
-    		// because RTMPDeFragmentDataFrame() will release rx packet,
-    		// if packet is fragmented
-    		return;
-    	}
-	}
-
-	ASSERT(0);
-	// release packet
-	RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
-}
-
-VOID STAHandleRxMgmtFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk)
-{
-	PRT28XX_RXD_STRUC	pRxD = &(pRxBlk->RxD);
-	PRXWI_STRUC		pRxWI = pRxBlk->pRxWI;
-	PHEADER_802_11	pHeader = pRxBlk->pHeader;
-	PNDIS_PACKET	pRxPacket = pRxBlk->pRxPacket;
-
-	do
-	{
-
-		// We should collect RSSI not only U2M data but also my beacon
-		if ((pHeader->FC.SubType == SUBTYPE_BEACON) && (MAC_ADDR_EQUAL(&pAd->CommonCfg.Bssid, &pHeader->Addr2)))
-		{
-			Update_Rssi_Sample(pAd, &pAd->StaCfg.RssiSample, pRxWI);
-
-			pAd->StaCfg.LastSNR0 = (UCHAR)(pRxWI->SNR0);
-			pAd->StaCfg.LastSNR1 = (UCHAR)(pRxWI->SNR1);
-		}
-
-		// First check the size, it MUST not exceed the mlme queue size
-		if (pRxWI->MPDUtotalByteCount > MGMT_DMA_BUFFER_SIZE)
-		{
-			DBGPRINT_ERR(("STAHandleRxMgmtFrame: frame too large, size = %d \n", pRxWI->MPDUtotalByteCount));
-			break;
-		}
-
-		REPORT_MGMT_FRAME_TO_MLME(pAd, pRxWI->WirelessCliID, pHeader, pRxWI->MPDUtotalByteCount,
-									pRxWI->RSSI0, pRxWI->RSSI1, pRxWI->RSSI2, pRxD->PlcpSignal);
-	} while (FALSE);
-
-	RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_SUCCESS);
-}
-
-VOID STAHandleRxControlFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk)
-{
-#ifdef DOT11_N_SUPPORT
-	PRXWI_STRUC		pRxWI = pRxBlk->pRxWI;
-#endif // DOT11_N_SUPPORT //
-	PHEADER_802_11	pHeader = pRxBlk->pHeader;
-	PNDIS_PACKET	pRxPacket = pRxBlk->pRxPacket;
-
-	switch (pHeader->FC.SubType)
-	{
-		case SUBTYPE_BLOCK_ACK_REQ:
-#ifdef DOT11_N_SUPPORT
-			{
-				CntlEnqueueForRecv(pAd, pRxWI->WirelessCliID, (pRxWI->MPDUtotalByteCount), (PFRAME_BA_REQ)pHeader);
-			}
-			break;
-#endif // DOT11_N_SUPPORT //
-		case SUBTYPE_BLOCK_ACK:
-		case SUBTYPE_ACK:
-		default:
-			break;
-	}
-
-	RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Process RxDone interrupt, running in DPC level
-
-	Arguments:
-		pAd Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-		This routine has to maintain Rx ring read pointer.
-		Need to consider QOS DATA format when converting to 802.3
-	========================================================================
-*/
-BOOLEAN STARxDoneInterruptHandle(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	BOOLEAN			argc)
-{
-	NDIS_STATUS			Status;
-	UINT32			RxProcessed, RxPending;
-	BOOLEAN			bReschedule = FALSE;
-	RT28XX_RXD_STRUC	*pRxD;
-	UCHAR			*pData;
-	PRXWI_STRUC		pRxWI;
-	PNDIS_PACKET	pRxPacket;
-	PHEADER_802_11	pHeader;
-	RX_BLK			RxCell;
-
-	RxProcessed = RxPending = 0;
-
-	// process whole rx ring
-	while (1)
-	{
-
-		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF |
-								fRTMP_ADAPTER_RESET_IN_PROGRESS |
-								fRTMP_ADAPTER_HALT_IN_PROGRESS |
-								fRTMP_ADAPTER_NIC_NOT_EXIST) ||
-			!RTMP_TEST_FLAG(pAd,fRTMP_ADAPTER_START_UP))
-		{
-			break;
-		}
-
-
-		RxProcessed ++; // test
-
-		// 1. allocate a new data packet into rx ring to replace received packet
-		//    then processing the received packet
-		// 2. the callee must take charge of release of packet
-		// 3. As far as driver is concerned ,
-		//    the rx packet must
-		//      a. be indicated to upper layer or
-		//      b. be released if it is discarded
-		pRxPacket = GetPacketFromRxRing(pAd, &(RxCell.RxD), &bReschedule, &RxPending);
-		if (pRxPacket == NULL)
-		{
-			// no more packet to process
-			break;
-		}
-
-		// get rx ring descriptor
-		pRxD = &(RxCell.RxD);
-		// get rx data buffer
-		pData	= GET_OS_PKT_DATAPTR(pRxPacket);
-		pRxWI	= (PRXWI_STRUC) pData;
-		pHeader = (PHEADER_802_11) (pData+RXWI_SIZE) ;
-
-#ifdef RT_BIG_ENDIAN
-	    RTMPFrameEndianChange(pAd, (PUCHAR)pHeader, DIR_READ, TRUE);
-		RTMPWIEndianChange((PUCHAR)pRxWI, TYPE_RXWI);
-#endif
-
-		// build RxCell
-		RxCell.pRxWI = pRxWI;
-		RxCell.pHeader = pHeader;
-		RxCell.pRxPacket = pRxPacket;
-		RxCell.pData = (UCHAR *) pHeader;
-		RxCell.DataSize = pRxWI->MPDUtotalByteCount;
-		RxCell.Flags = 0;
-
-		// Increase Total receive byte counter after real data received no mater any error or not
-		pAd->RalinkCounters.ReceivedByteCount +=  pRxWI->MPDUtotalByteCount;
-		pAd->RalinkCounters.RxCount ++;
-
-		INC_COUNTER64(pAd->WlanCounters.ReceivedFragmentCount);
-
-		if (pRxWI->MPDUtotalByteCount < 14)
-			Status = NDIS_STATUS_FAILURE;
-
-        if (MONITOR_ON(pAd))
-		{
-            send_monitor_packets(pAd, &RxCell);
-			break;
-		}
-		/* RT2870 invokes STARxDoneInterruptHandle() in rtusb_bulk.c */
-#ifdef RALINK_ATE
-		if (ATE_ON(pAd))
-		{
-			pAd->ate.RxCntPerSec++;
-			ATESampleRssi(pAd, pRxWI);
-#ifdef RALINK_28xx_QA
-			if (pAd->ate.bQARxStart == TRUE)
-			{
-				/* (*pRxD) has been swapped in GetPacketFromRxRing() */
-				ATE_QA_Statistics(pAd, pRxWI, pRxD,	pHeader);
-			}
-#endif // RALINK_28xx_QA //
-			RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_SUCCESS);
-			continue;
-		}
-#endif // RALINK_ATE //
-
-		// Check for all RxD errors
-		Status = RTMPCheckRxError(pAd, pHeader, pRxWI, pRxD);
-
-		// Handle the received frame
-		if (Status == NDIS_STATUS_SUCCESS)
-		{
-			switch (pHeader->FC.Type)
-			{
-				// CASE I, receive a DATA frame
-				case BTYPE_DATA:
-				{
-					// process DATA frame
-					STAHandleRxDataFrame(pAd, &RxCell);
-				}
-				break;
-				// CASE II, receive a MGMT frame
-				case BTYPE_MGMT:
-				{
-					STAHandleRxMgmtFrame(pAd, &RxCell);
-				}
-				break;
-				// CASE III. receive a CNTL frame
-				case BTYPE_CNTL:
-				{
-					STAHandleRxControlFrame(pAd, &RxCell);
-				}
-				break;
-				// discard other type
-				default:
-					RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
-					break;
-			}
-		}
-		else
-		{
-			pAd->Counters8023.RxErrors++;
-			// discard this frame
-			RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
-		}
-	}
-
-	return bReschedule;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-	Arguments:
-		pAd 	Pointer to our adapter
-
-	IRQL = DISPATCH_LEVEL
-
-	========================================================================
-*/
-VOID	RTMPHandleTwakeupInterrupt(
-	IN PRTMP_ADAPTER pAd)
-{
-	AsicForceWakeup(pAd, FALSE);
-}
-
-/*
-========================================================================
-Routine Description:
-    Early checking and OS-depened parsing for Tx packet send to our STA driver.
-
-Arguments:
-    NDIS_HANDLE 	MiniportAdapterContext	Pointer refer to the device handle, i.e., the pAd.
-	PPNDIS_PACKET	ppPacketArray			The packet array need to do transmission.
-	UINT			NumberOfPackets			Number of packet in packet array.
-
-Return Value:
-	NONE
-
-Note:
-	This function do early checking and classification for send-out packet.
-	You only can put OS-depened & STA related code in here.
-========================================================================
-*/
-VOID STASendPackets(
-	IN	NDIS_HANDLE		MiniportAdapterContext,
-	IN	PPNDIS_PACKET	ppPacketArray,
-	IN	UINT			NumberOfPackets)
-{
-	UINT			Index;
-	PRTMP_ADAPTER	pAd = (PRTMP_ADAPTER) MiniportAdapterContext;
-	PNDIS_PACKET	pPacket;
-	BOOLEAN			allowToSend = FALSE;
-
-
-	for (Index = 0; Index < NumberOfPackets; Index++)
-	{
-		pPacket = ppPacketArray[Index];
-
-		do
-		{
-			if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS) ||
-				RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS) ||
-				RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))
-			{
-				// Drop send request since hardware is in reset state
-					break;
-			}
-			else if (!INFRA_ON(pAd) && !ADHOC_ON(pAd))
-			{
-				// Drop send request since there are no physical connection yet
-					break;
-			}
-			else
-			{
-				// Record that orignal packet source is from NDIS layer,so that
-				// later on driver knows how to release this NDIS PACKET
-#ifdef QOS_DLS_SUPPORT
-				MAC_TABLE_ENTRY *pEntry;
-				PUCHAR pSrcBufVA = GET_OS_PKT_DATAPTR(pPacket);
-
-				pEntry = MacTableLookup(pAd, pSrcBufVA);
-				if (pEntry && (pEntry->ValidAsDls == TRUE))
-				{
-					RTMP_SET_PACKET_WCID(pPacket, pEntry->Aid);
-				}
-				else
-#endif // QOS_DLS_SUPPORT //
-				RTMP_SET_PACKET_WCID(pPacket, 0); // this field is useless when in STA mode
-				RTMP_SET_PACKET_SOURCE(pPacket, PKTSRC_NDIS);
-				NDIS_SET_PACKET_STATUS(pPacket, NDIS_STATUS_PENDING);
-				pAd->RalinkCounters.PendingNdisPacketCount++;
-
-				allowToSend = TRUE;
-			}
-		} while(FALSE);
-
-		if (allowToSend == TRUE)
-			STASendPacket(pAd, pPacket);
-		else
-			RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
-	}
-
-	// Dequeue outgoing frames from TxSwQueue[] and process it
-	RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS);
-
-}
-
-
-/*
-========================================================================
-Routine Description:
-	This routine is used to do packet parsing and classification for Tx packet
-	to STA device, and it will en-queue packets to our TxSwQueue depends on AC
-	class.
-
-Arguments:
-	pAd    		Pointer to our adapter
-	pPacket 	Pointer to send packet
-
-Return Value:
-	NDIS_STATUS_SUCCESS			If succes to queue the packet into TxSwQueue.
-	NDIS_STATUS_FAILURE			If failed to do en-queue.
-
-Note:
-	You only can put OS-indepened & STA related code in here.
-========================================================================
-*/
-NDIS_STATUS STASendPacket(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket)
-{
-	PACKET_INFO 	PacketInfo;
-	PUCHAR			pSrcBufVA;
-	UINT			SrcBufLen;
-	UINT			AllowFragSize;
-	UCHAR			NumberOfFrag;
-//	UCHAR			RTSRequired;
-	UCHAR			QueIdx, UserPriority;
-	MAC_TABLE_ENTRY *pEntry = NULL;
-	unsigned int 	IrqFlags;
-	UCHAR			FlgIsIP = 0;
-	UCHAR			Rate;
-
-	// Prepare packet information structure for buffer descriptor
-	// chained within a single NDIS packet.
-	RTMP_QueryPacketInfo(pPacket, &PacketInfo, &pSrcBufVA, &SrcBufLen);
-
-	if (pSrcBufVA == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("STASendPacket --> pSrcBufVA == NULL !!!SrcBufLen=%x\n",SrcBufLen));
-		// Resourece is low, system did not allocate virtual address
-		// return NDIS_STATUS_FAILURE directly to upper layer
-		RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
-		return NDIS_STATUS_FAILURE;
-	}
-
-
-	if (SrcBufLen < 14)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("STASendPacket --> Ndis Packet buffer error !!!\n"));
-		RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
-		return (NDIS_STATUS_FAILURE);
-	}
-
-	// In HT rate adhoc mode, A-MPDU is often used. So need to lookup BA Table and MAC Entry.
-	// Note multicast packets in adhoc also use BSSID_WCID index.
-	{
-		if(INFRA_ON(pAd))
-		{
-#ifdef QOS_DLS_SUPPORT
-			USHORT	tmpWcid;
-
-			tmpWcid = RTMP_GET_PACKET_WCID(pPacket);
-			if (VALID_WCID(tmpWcid) &&
-				(pAd->MacTab.Content[tmpWcid].ValidAsDls== TRUE))
-			{
-				pEntry = &pAd->MacTab.Content[tmpWcid];
-				Rate = pAd->MacTab.Content[tmpWcid].CurrTxRate;
-			}
-			else
-#endif // QOS_DLS_SUPPORT //
-			{
-			pEntry = &pAd->MacTab.Content[BSSID_WCID];
-			RTMP_SET_PACKET_WCID(pPacket, BSSID_WCID);
-			Rate = pAd->CommonCfg.TxRate;
-		}
-		}
-		else if (ADHOC_ON(pAd))
-		{
-			if (*pSrcBufVA & 0x01)
-			{
-				RTMP_SET_PACKET_WCID(pPacket, MCAST_WCID);
-				pEntry = &pAd->MacTab.Content[MCAST_WCID];
-			}
-			else
-			{
-				pEntry = MacTableLookup(pAd, pSrcBufVA);
-			}
-			Rate = pAd->CommonCfg.TxRate;
-		}
-	}
-
-	if (!pEntry)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("STASendPacket->Cannot find pEntry(%2x:%2x:%2x:%2x:%2x:%2x) in MacTab!\n", PRINT_MAC(pSrcBufVA)));
-		// Resourece is low, system did not allocate virtual address
-		// return NDIS_STATUS_FAILURE directly to upper layer
-		RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
-		return NDIS_STATUS_FAILURE;
-	}
-
-	if (ADHOC_ON(pAd)
-		)
-	{
-		RTMP_SET_PACKET_WCID(pPacket, (UCHAR)pEntry->Aid);
-	}
-
-	//
-	// Check the Ethernet Frame type of this packet, and set the RTMP_SET_PACKET_SPECIFIC flags.
-	//		Here we set the PACKET_SPECIFIC flags(LLC, VLAN, DHCP/ARP, EAPOL).
-	RTMPCheckEtherType(pAd, pPacket);
-
-
-
-	//
-	// WPA 802.1x secured port control - drop all non-802.1x frame before port secured
-	//
-	if (((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) ||
-		 (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
-		 (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) ||
-		 (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)
-#ifdef WPA_SUPPLICANT_SUPPORT
-		  || (pAd->StaCfg.IEEE8021X == TRUE)
-#endif // WPA_SUPPLICANT_SUPPORT //
-#ifdef LEAP_SUPPORT
-		  || (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-#endif // LEAP_SUPPORT //
-		  )
-		  && ((pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED) || (pAd->StaCfg.MicErrCnt >= 2))
-		  && (RTMP_GET_PACKET_EAPOL(pPacket)== FALSE)
-		  )
-	{
-		DBGPRINT(RT_DEBUG_TRACE,("STASendPacket --> Drop packet before port secured !!!\n"));
-		RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
-
-		return (NDIS_STATUS_FAILURE);
-	}
-
-
-	// STEP 1. Decide number of fragments required to deliver this MSDU.
-	//	   The estimation here is not very accurate because difficult to
-	//	   take encryption overhead into consideration here. The result
-	//	   "NumberOfFrag" is then just used to pre-check if enough free
-	//	   TXD are available to hold this MSDU.
-
-
-	if (*pSrcBufVA & 0x01)	// fragmentation not allowed on multicast & broadcast
-		NumberOfFrag = 1;
-	else if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED))
-		NumberOfFrag = 1;	// Aggregation overwhelms fragmentation
-	else if (CLIENT_STATUS_TEST_FLAG(pEntry, fCLIENT_STATUS_AMSDU_INUSED))
-		NumberOfFrag = 1;	// Aggregation overwhelms fragmentation
-#ifdef DOT11_N_SUPPORT
-	else if ((pAd->StaCfg.HTPhyMode.field.MODE == MODE_HTMIX) || (pAd->StaCfg.HTPhyMode.field.MODE == MODE_HTGREENFIELD))
-		NumberOfFrag = 1;	// MIMO RATE overwhelms fragmentation
-#endif // DOT11_N_SUPPORT //
-	else
-	{
-		// The calculated "NumberOfFrag" is a rough estimation because of various
-		// encryption/encapsulation overhead not taken into consideration. This number is just
-		// used to make sure enough free TXD are available before fragmentation takes place.
-		// In case the actual required number of fragments of an NDIS packet
-		// excceeds "NumberOfFrag"caculated here and not enough free TXD available, the
-		// last fragment (i.e. last MPDU) will be dropped in RTMPHardTransmit() due to out of
-		// resource, and the NDIS packet will be indicated NDIS_STATUS_FAILURE. This should
-		// rarely happen and the penalty is just like a TX RETRY fail. Affordable.
-
-		AllowFragSize = (pAd->CommonCfg.FragmentThreshold) - LENGTH_802_11 - LENGTH_CRC;
-		NumberOfFrag = ((PacketInfo.TotalPacketLength - LENGTH_802_3 + LENGTH_802_1_H) / AllowFragSize) + 1;
-		// To get accurate number of fragmentation, Minus 1 if the size just match to allowable fragment size
-		if (((PacketInfo.TotalPacketLength - LENGTH_802_3 + LENGTH_802_1_H) % AllowFragSize) == 0)
-		{
-			NumberOfFrag--;
-		}
-	}
-
-	// Save fragment number to Ndis packet reserved field
-	RTMP_SET_PACKET_FRAGMENTS(pPacket, NumberOfFrag);
-
-
-	// STEP 2. Check the requirement of RTS:
-	//	   If multiple fragment required, RTS is required only for the first fragment
-	//	   if the fragment size large than RTS threshold
-	//     For RT28xx, Let ASIC send RTS/CTS
-	RTMP_SET_PACKET_RTS(pPacket, 0);
-	RTMP_SET_PACKET_TXRATE(pPacket, pAd->CommonCfg.TxRate);
-
-	//
-	// STEP 3. Traffic classification. outcome = <UserPriority, QueIdx>
-	//
-	UserPriority = 0;
-	QueIdx		 = QID_AC_BE;
-	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) &&
-		CLIENT_STATUS_TEST_FLAG(pEntry, fCLIENT_STATUS_WMM_CAPABLE))
-	{
-		USHORT Protocol;
-		UCHAR  LlcSnapLen = 0, Byte0, Byte1;
-		do
-		{
-			// get Ethernet protocol field
-			Protocol = (USHORT)((pSrcBufVA[12] << 8) + pSrcBufVA[13]);
-			if (Protocol <= 1500)
-			{
-				// get Ethernet protocol field from LLC/SNAP
-				if (Sniff2BytesFromNdisBuffer(PacketInfo.pFirstBuffer, LENGTH_802_3 + 6, &Byte0, &Byte1) != NDIS_STATUS_SUCCESS)
-					break;
-
-				Protocol = (USHORT)((Byte0 << 8) + Byte1);
-				LlcSnapLen = 8;
-			}
-
-			// always AC_BE for non-IP packet
-			if (Protocol != 0x0800)
-				break;
-
-			// get IP header
-			if (Sniff2BytesFromNdisBuffer(PacketInfo.pFirstBuffer, LENGTH_802_3 + LlcSnapLen, &Byte0, &Byte1) != NDIS_STATUS_SUCCESS)
-				break;
-
-			// return AC_BE if packet is not IPv4
-			if ((Byte0 & 0xf0) != 0x40)
-				break;
-
-			FlgIsIP = 1;
-			UserPriority = (Byte1 & 0xe0) >> 5;
-			QueIdx = MapUserPriorityToAccessCategory[UserPriority];
-
-			// TODO: have to check ACM bit. apply TSPEC if ACM is ON
-			// TODO: downgrade UP & QueIdx before passing ACM
-			if (pAd->CommonCfg.APEdcaParm.bACM[QueIdx])
-			{
-				UserPriority = 0;
-				QueIdx		 = QID_AC_BE;
-			}
-		} while (FALSE);
-	}
-
-	RTMP_SET_PACKET_UP(pPacket, UserPriority);
-
-
-
-	// Make sure SendTxWait queue resource won't be used by other threads
-	RTMP_IRQ_LOCK(&pAd->irq_lock, IrqFlags);
-	if (pAd->TxSwQueue[QueIdx].Number >= MAX_PACKETS_IN_QUEUE)
-	{
-		RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags);
-#ifdef BLOCK_NET_IF
-		StopNetIfQueue(pAd, QueIdx, pPacket);
-#endif // BLOCK_NET_IF //
-		RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
-
-		return NDIS_STATUS_FAILURE;
-	}
-	else
-	{
-		InsertTailQueue(&pAd->TxSwQueue[QueIdx], PACKET_TO_QUEUE_ENTRY(pPacket));
-	}
-	RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags);
-
-#ifdef DOT11_N_SUPPORT
-    if ((pAd->CommonCfg.BACapability.field.AutoBA == TRUE)&&
-        IS_HT_STA(pEntry))
-	{
-	    //PMAC_TABLE_ENTRY pMacEntry = &pAd->MacTab.Content[BSSID_WCID];
-		if (((pEntry->TXBAbitmap & (1<<UserPriority)) == 0) &&
-            ((pEntry->BADeclineBitmap & (1<<UserPriority)) == 0) &&
-            (pEntry->PortSecured == WPA_802_1X_PORT_SECURED)
-			 // For IOT compatibility, if
-			 // 1. It is Ralink chip or
-			 // 2. It is OPEN or AES mode,
-			 // then BA session can be bulit.
-			 && ((pEntry->ValidAsCLI && pAd->MlmeAux.APRalinkIe != 0x0) ||
-			 	 (pEntry->WepStatus == Ndis802_11WEPDisabled || pEntry->WepStatus == Ndis802_11Encryption3Enabled))
-			)
-		{
-			BAOriSessionSetUp(pAd, pEntry, 0, 0, 10, FALSE);
-		}
-	}
-#endif // DOT11_N_SUPPORT //
-
-	pAd->RalinkCounters.OneSecOsTxCount[QueIdx]++; // TODO: for debug only. to be removed
-	return NDIS_STATUS_SUCCESS;
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		This subroutine will scan through releative ring descriptor to find
-		out avaliable free ring descriptor and compare with request size.
-
-	Arguments:
-		pAd Pointer to our adapter
-		QueIdx		Selected TX Ring
-
-	Return Value:
-		NDIS_STATUS_FAILURE 	Not enough free descriptor
-		NDIS_STATUS_SUCCESS 	Enough free descriptor
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-
-#ifdef RT2870
-/*
-	Actually, this function used to check if the TxHardware Queue still has frame need to send.
-	If no frame need to send, go to sleep, else, still wake up.
-*/
-NDIS_STATUS RTMPFreeTXDRequest(
-	IN		PRTMP_ADAPTER	pAd,
-	IN		UCHAR			QueIdx,
-	IN		UCHAR			NumberRequired,
-	IN		PUCHAR			FreeNumberIs)
-{
-	//ULONG		FreeNumber = 0;
-	NDIS_STATUS 	Status = NDIS_STATUS_FAILURE;
-	unsigned long   IrqFlags;
-	HT_TX_CONTEXT	*pHTTXContext;
-
-	switch (QueIdx)
-	{
-		case QID_AC_BK:
-		case QID_AC_BE:
-		case QID_AC_VI:
-		case QID_AC_VO:
-		case QID_HCCA:
-			{
-				pHTTXContext = &pAd->TxContext[QueIdx];
-				RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
-				if ((pHTTXContext->CurWritePosition != pHTTXContext->ENextBulkOutPosition) ||
-					(pHTTXContext->IRPPending == TRUE))
-				{
-					Status = NDIS_STATUS_FAILURE;
-				}
-				else
-				{
-					Status = NDIS_STATUS_SUCCESS;
-				}
-				RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
-			}
-			break;
-
-		case QID_MGMT:
-			if (pAd->MgmtRing.TxSwFreeIdx != MGMT_RING_SIZE)
-				Status = NDIS_STATUS_FAILURE;
-			else
-				Status = NDIS_STATUS_SUCCESS;
-			break;
-
-		default:
-			DBGPRINT(RT_DEBUG_ERROR,("RTMPFreeTXDRequest::Invalid QueIdx(=%d)\n", QueIdx));
-			break;
-	}
-
-	return (Status);
-
-}
-#endif // RT2870 //
-
-
-VOID RTMPSendDisassociationFrame(
-	IN	PRTMP_ADAPTER	pAd)
-{
-}
-
-VOID	RTMPSendNullFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			TxRate,
-	IN	BOOLEAN 		bQosNull)
-{
-	UCHAR	NullFrame[48];
-	ULONG	Length;
-	PHEADER_802_11	pHeader_802_11;
-
-
-#ifdef RALINK_ATE
-	if(ATE_ON(pAd))
-	{
-		return;
-	}
-#endif // RALINK_ATE //
-
-    // WPA 802.1x secured port control
-    if (((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) ||
-         (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
-         (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) ||
-         (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)
-#ifdef WPA_SUPPLICANT_SUPPORT
-			  || (pAd->StaCfg.IEEE8021X == TRUE)
-#endif
-        ) &&
-       (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
-	{
-		return;
-	}
-
-	NdisZeroMemory(NullFrame, 48);
-	Length = sizeof(HEADER_802_11);
-
-	pHeader_802_11 = (PHEADER_802_11) NullFrame;
-
-	pHeader_802_11->FC.Type = BTYPE_DATA;
-	pHeader_802_11->FC.SubType = SUBTYPE_NULL_FUNC;
-	pHeader_802_11->FC.ToDs = 1;
-	COPY_MAC_ADDR(pHeader_802_11->Addr1, pAd->CommonCfg.Bssid);
-	COPY_MAC_ADDR(pHeader_802_11->Addr2, pAd->CurrentAddress);
-	COPY_MAC_ADDR(pHeader_802_11->Addr3, pAd->CommonCfg.Bssid);
-
-	if (pAd->CommonCfg.bAPSDForcePowerSave)
-	{
-		pHeader_802_11->FC.PwrMgmt = PWR_SAVE;
-	}
-	else
-	{
-		pHeader_802_11->FC.PwrMgmt = (pAd->StaCfg.Psm == PWR_SAVE) ? 1: 0;
-	}
-	pHeader_802_11->Duration = pAd->CommonCfg.Dsifs + RTMPCalcDuration(pAd, TxRate, 14);
-
-	pAd->Sequence++;
-	pHeader_802_11->Sequence = pAd->Sequence;
-
-	// Prepare QosNull function frame
-	if (bQosNull)
-	{
-		pHeader_802_11->FC.SubType = SUBTYPE_QOS_NULL;
-
-		// copy QOS control bytes
-		NullFrame[Length]	=  0;
-		NullFrame[Length+1] =  0;
-		Length += 2;// if pad with 2 bytes for alignment, APSD will fail
-	}
-
-	HAL_KickOutNullFrameTx(pAd, 0, NullFrame, Length);
-
-}
-
-// IRQL = DISPATCH_LEVEL
-VOID	RTMPSendRTSFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pDA,
-	IN	unsigned int	NextMpduSize,
-	IN	UCHAR			TxRate,
-	IN	UCHAR			RTSRate,
-	IN	USHORT			AckDuration,
-	IN	UCHAR			QueIdx,
-	IN	UCHAR			FrameGap)
-{
-}
-
-
-
-// --------------------------------------------------------
-//  FIND ENCRYPT KEY AND DECIDE CIPHER ALGORITHM
-//		Find the WPA key, either Group or Pairwise Key
-//		LEAP + TKIP also use WPA key.
-// --------------------------------------------------------
-// Decide WEP bit and cipher suite to be used. Same cipher suite should be used for whole fragment burst
-// In Cisco CCX 2.0 Leap Authentication
-//		   WepStatus is Ndis802_11Encryption1Enabled but the key will use PairwiseKey
-//		   Instead of the SharedKey, SharedKey Length may be Zero.
-VOID STAFindCipherAlgorithm(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk)
-{
-	NDIS_802_11_ENCRYPTION_STATUS	Cipher;				// To indicate cipher used for this packet
-	UCHAR							CipherAlg = CIPHER_NONE;		// cipher alogrithm
-	UCHAR							KeyIdx = 0xff;
-	PUCHAR							pSrcBufVA;
-	PCIPHER_KEY						pKey = NULL;
-
-	pSrcBufVA = GET_OS_PKT_DATAPTR(pTxBlk->pPacket);
-
-	{
-	    // Select Cipher
-	    if ((*pSrcBufVA & 0x01) && (ADHOC_ON(pAd)))
-	        Cipher = pAd->StaCfg.GroupCipher; // Cipher for Multicast or Broadcast
-	    else
-	        Cipher = pAd->StaCfg.PairCipher; // Cipher for Unicast
-
-		if (RTMP_GET_PACKET_EAPOL(pTxBlk->pPacket))
-		{
-			ASSERT(pAd->SharedKey[BSS0][0].CipherAlg <= CIPHER_CKIP128);
-
-			// 4-way handshaking frame must be clear
-			if (!(TX_BLK_TEST_FLAG(pTxBlk, fTX_bClearEAPFrame)) && (pAd->SharedKey[BSS0][0].CipherAlg) &&
-				(pAd->SharedKey[BSS0][0].KeyLen))
-			{
-				CipherAlg = pAd->SharedKey[BSS0][0].CipherAlg;
-				KeyIdx = 0;
-			}
-		}
-		else if (Cipher == Ndis802_11Encryption1Enabled)
-		{
-#ifdef LEAP_SUPPORT
-			if (pAd->StaCfg.CkipFlag & 0x10) // Cisco CKIP KP is on
-			{
-				if (LEAP_CCKM_ON(pAd))
-				{
-					if (((*pSrcBufVA & 0x01) && (ADHOC_ON(pAd))))
-						KeyIdx = 1;
-					else
-						KeyIdx = 0;
-				}
-				else
-					KeyIdx = pAd->StaCfg.DefaultKeyId;
-			}
-			else if (pAd->StaCfg.CkipFlag & 0x08) // only CKIP CMIC
-				KeyIdx = pAd->StaCfg.DefaultKeyId;
-			else if (LEAP_CCKM_ON(pAd))
-			{
-				if ((*pSrcBufVA & 0x01) && (ADHOC_ON(pAd)))
-					KeyIdx = 1;
-				else
-					KeyIdx = 0;
-			}
-			else	// standard WEP64 or WEP128
-#endif // LEAP_SUPPORT //
-				KeyIdx = pAd->StaCfg.DefaultKeyId;
-		}
-		else if ((Cipher == Ndis802_11Encryption2Enabled) ||
-				 (Cipher == Ndis802_11Encryption3Enabled))
-		{
-			if ((*pSrcBufVA & 0x01) && (ADHOC_ON(pAd))) // multicast
-				KeyIdx = pAd->StaCfg.DefaultKeyId;
-			else if (pAd->SharedKey[BSS0][0].KeyLen)
-				KeyIdx = 0;
-			else
-				KeyIdx = pAd->StaCfg.DefaultKeyId;
-		}
-
-		if (KeyIdx == 0xff)
-			CipherAlg = CIPHER_NONE;
-		else if ((Cipher == Ndis802_11EncryptionDisabled) || (pAd->SharedKey[BSS0][KeyIdx].KeyLen == 0))
-			CipherAlg = CIPHER_NONE;
-#ifdef WPA_SUPPLICANT_SUPPORT
-	    else if ( pAd->StaCfg.WpaSupplicantUP &&
-	             (Cipher == Ndis802_11Encryption1Enabled) &&
-	             (pAd->StaCfg.IEEE8021X == TRUE) &&
-	             (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
-	        CipherAlg = CIPHER_NONE;
-#endif // WPA_SUPPLICANT_SUPPORT //
-		else
-		{
-			//Header_802_11.FC.Wep = 1;
-			CipherAlg = pAd->SharedKey[BSS0][KeyIdx].CipherAlg;
-			pKey = &pAd->SharedKey[BSS0][KeyIdx];
-		}
-	}
-
-	pTxBlk->CipherAlg = CipherAlg;
-	pTxBlk->pKey = pKey;
-}
-
-
-VOID STABuildCommon802_11Header(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  TX_BLK          *pTxBlk)
-{
-
-	HEADER_802_11	*pHeader_802_11;
-#ifdef QOS_DLS_SUPPORT
-	BOOLEAN	bDLSFrame = FALSE;
-	INT	DlsEntryIndex = 0;
-#endif // QOS_DLS_SUPPORT //
-
-	//
-	// MAKE A COMMON 802.11 HEADER
-	//
-
-	// normal wlan header size : 24 octets
-	pTxBlk->MpduHeaderLen = sizeof(HEADER_802_11);
-
-	pHeader_802_11 = (HEADER_802_11 *) &pTxBlk->HeaderBuf[TXINFO_SIZE + TXWI_SIZE];
-
-	NdisZeroMemory(pHeader_802_11, sizeof(HEADER_802_11));
-
-	pHeader_802_11->FC.FrDs = 0;
-	pHeader_802_11->FC.Type = BTYPE_DATA;
-	pHeader_802_11->FC.SubType = ((TX_BLK_TEST_FLAG(pTxBlk, fTX_bWMM)) ? SUBTYPE_QDATA : SUBTYPE_DATA);
-
-#ifdef QOS_DLS_SUPPORT
-	if (INFRA_ON(pAd))
-	{
-		// Check if the frame can be sent through DLS direct link interface
-		// If packet can be sent through DLS, then force aggregation disable. (Hard to determine peer STA's capability)
-		DlsEntryIndex = RTMPCheckDLSFrame(pAd, pTxBlk->pSrcBufHeader);
-		if (DlsEntryIndex >= 0)
-			bDLSFrame = TRUE;
-		else
-			bDLSFrame = FALSE;
-	}
-#endif // QOS_DLS_SUPPORT //
-
-    if (pTxBlk->pMacEntry)
-	{
-		if (TX_BLK_TEST_FLAG(pTxBlk, fTX_bForceNonQoS))
-		{
-			pHeader_802_11->Sequence = pTxBlk->pMacEntry->NonQosDataSeq;
-			pTxBlk->pMacEntry->NonQosDataSeq = (pTxBlk->pMacEntry->NonQosDataSeq+1) & MAXSEQ;
-		}
-		else
-		{
-    	    pHeader_802_11->Sequence = pTxBlk->pMacEntry->TxSeq[pTxBlk->UserPriority];
-    	    pTxBlk->pMacEntry->TxSeq[pTxBlk->UserPriority] = (pTxBlk->pMacEntry->TxSeq[pTxBlk->UserPriority]+1) & MAXSEQ;
-    	}
-	}
-	else
-	{
-		pHeader_802_11->Sequence = pAd->Sequence;
-		pAd->Sequence = (pAd->Sequence+1) & MAXSEQ; // next sequence
-	}
-
-	pHeader_802_11->Frag = 0;
-
-	pHeader_802_11->FC.MoreData = TX_BLK_TEST_FLAG(pTxBlk, fTX_bMoreData);
-
-	{
-		if (INFRA_ON(pAd))
-		{
-#ifdef QOS_DLS_SUPPORT
-			if (bDLSFrame)
-			{
-				COPY_MAC_ADDR(pHeader_802_11->Addr1, pTxBlk->pSrcBufHeader);
-				COPY_MAC_ADDR(pHeader_802_11->Addr2, pAd->CurrentAddress);
-				COPY_MAC_ADDR(pHeader_802_11->Addr3, pAd->CommonCfg.Bssid);
-				pHeader_802_11->FC.ToDs = 0;
-			}
-			else
-#endif // QOS_DLS_SUPPORT //
-			{
-			COPY_MAC_ADDR(pHeader_802_11->Addr1, pAd->CommonCfg.Bssid);
-			COPY_MAC_ADDR(pHeader_802_11->Addr2, pAd->CurrentAddress);
-			COPY_MAC_ADDR(pHeader_802_11->Addr3, pTxBlk->pSrcBufHeader);
-			pHeader_802_11->FC.ToDs = 1;
-		}
-		}
-		else if (ADHOC_ON(pAd))
-		{
-			COPY_MAC_ADDR(pHeader_802_11->Addr1, pTxBlk->pSrcBufHeader);
-			COPY_MAC_ADDR(pHeader_802_11->Addr2, pAd->CurrentAddress);
-			COPY_MAC_ADDR(pHeader_802_11->Addr3, pAd->CommonCfg.Bssid);
-			pHeader_802_11->FC.ToDs = 0;
-		}
-	}
-
-	if (pTxBlk->CipherAlg != CIPHER_NONE)
-		pHeader_802_11->FC.Wep = 1;
-
-	// -----------------------------------------------------------------
-	// STEP 2. MAKE A COMMON 802.11 HEADER SHARED BY ENTIRE FRAGMENT BURST. Fill sequence later.
-	// -----------------------------------------------------------------
-	if (pAd->CommonCfg.bAPSDForcePowerSave)
-    	pHeader_802_11->FC.PwrMgmt = PWR_SAVE;
-	else
-    	pHeader_802_11->FC.PwrMgmt = (pAd->StaCfg.Psm == PWR_SAVE);
-}
-
-#ifdef DOT11_N_SUPPORT
-VOID STABuildCache802_11Header(
-	IN RTMP_ADAPTER		*pAd,
-	IN TX_BLK			*pTxBlk,
-	IN UCHAR			*pHeader)
-{
-	MAC_TABLE_ENTRY	*pMacEntry;
-	PHEADER_802_11	pHeader80211;
-
-	pHeader80211 = (PHEADER_802_11)pHeader;
-	pMacEntry = pTxBlk->pMacEntry;
-
-	//
-	// Update the cached 802.11 HEADER
-	//
-
-	// normal wlan header size : 24 octets
-	pTxBlk->MpduHeaderLen = sizeof(HEADER_802_11);
-
-	// More Bit
-	pHeader80211->FC.MoreData = TX_BLK_TEST_FLAG(pTxBlk, fTX_bMoreData);
-
-	// Sequence
-	pHeader80211->Sequence = pMacEntry->TxSeq[pTxBlk->UserPriority];
-    pMacEntry->TxSeq[pTxBlk->UserPriority] = (pMacEntry->TxSeq[pTxBlk->UserPriority]+1) & MAXSEQ;
-
-	{
-		// Check if the frame can be sent through DLS direct link interface
-		// If packet can be sent through DLS, then force aggregation disable. (Hard to determine peer STA's capability)
-#ifdef QOS_DLS_SUPPORT
-		BOOLEAN	bDLSFrame = FALSE;
-		INT	DlsEntryIndex = 0;
-
-		DlsEntryIndex = RTMPCheckDLSFrame(pAd, pTxBlk->pSrcBufHeader);
-		if (DlsEntryIndex >= 0)
-			bDLSFrame = TRUE;
-		else
-			bDLSFrame = FALSE;
-#endif // QOS_DLS_SUPPORT //
-
-		// The addr3 of normal packet send from DS is Dest Mac address.
-#ifdef QOS_DLS_SUPPORT
-		if (bDLSFrame)
-		{
-			COPY_MAC_ADDR(pHeader80211->Addr1, pTxBlk->pSrcBufHeader);
-			COPY_MAC_ADDR(pHeader80211->Addr3, pAd->CommonCfg.Bssid);
-			pHeader80211->FC.ToDs = 0;
-		}
-		else
-#endif // QOS_DLS_SUPPORT //
-		if (ADHOC_ON(pAd))
-			COPY_MAC_ADDR(pHeader80211->Addr3, pAd->CommonCfg.Bssid);
-		else
-			COPY_MAC_ADDR(pHeader80211->Addr3, pTxBlk->pSrcBufHeader);
-	}
-
-	// -----------------------------------------------------------------
-	// STEP 2. MAKE A COMMON 802.11 HEADER SHARED BY ENTIRE FRAGMENT BURST. Fill sequence later.
-	// -----------------------------------------------------------------
-	if (pAd->CommonCfg.bAPSDForcePowerSave)
-    	pHeader80211->FC.PwrMgmt = PWR_SAVE;
-	else
-    	pHeader80211->FC.PwrMgmt = (pAd->StaCfg.Psm == PWR_SAVE);
-}
-#endif // DOT11_N_SUPPORT //
-
-static inline PUCHAR STA_Build_ARalink_Frame_Header(
-	IN RTMP_ADAPTER *pAd,
-	IN TX_BLK		*pTxBlk)
-{
-	PUCHAR			pHeaderBufPtr;
-	HEADER_802_11	*pHeader_802_11;
-	PNDIS_PACKET	pNextPacket;
-	UINT32			nextBufLen;
-	PQUEUE_ENTRY	pQEntry;
-
-	STAFindCipherAlgorithm(pAd, pTxBlk);
-	STABuildCommon802_11Header(pAd, pTxBlk);
-
-
-	pHeaderBufPtr = &pTxBlk->HeaderBuf[TXINFO_SIZE + TXWI_SIZE];
-	pHeader_802_11 = (HEADER_802_11 *) pHeaderBufPtr;
-
-	// steal "order" bit to mark "aggregation"
-	pHeader_802_11->FC.Order = 1;
-
-	// skip common header
-	pHeaderBufPtr += pTxBlk->MpduHeaderLen;
-
-	if (TX_BLK_TEST_FLAG(pTxBlk, fTX_bWMM))
-	{
-		//
-		// build QOS Control bytes
-		//
-		*pHeaderBufPtr = (pTxBlk->UserPriority & 0x0F);
-
-		*(pHeaderBufPtr+1) = 0;
-		pHeaderBufPtr +=2;
-		pTxBlk->MpduHeaderLen += 2;
-	}
-
-	// padding at front of LLC header. LLC header should at 4-bytes aligment.
-	pTxBlk->HdrPadLen = (ULONG)pHeaderBufPtr;
-	pHeaderBufPtr = (PCHAR)ROUND_UP(pHeaderBufPtr, 4);
-	pTxBlk->HdrPadLen = (ULONG)(pHeaderBufPtr - pTxBlk->HdrPadLen);
-
-	// For RA Aggregation,
-	// put the 2nd MSDU length(extra 2-byte field) after QOS_CONTROL in little endian format
-	pQEntry = pTxBlk->TxPacketList.Head;
-	pNextPacket = QUEUE_ENTRY_TO_PKT(pQEntry);
-	nextBufLen = GET_OS_PKT_LEN(pNextPacket);
-	if (RTMP_GET_PACKET_VLAN(pNextPacket))
-		nextBufLen -= LENGTH_802_1Q;
-
-	*pHeaderBufPtr = (UCHAR)nextBufLen & 0xff;
-	*(pHeaderBufPtr+1) = (UCHAR)(nextBufLen >> 8);
-
-	pHeaderBufPtr += 2;
-	pTxBlk->MpduHeaderLen += 2;
-
-	return pHeaderBufPtr;
-
-}
-
-#ifdef DOT11_N_SUPPORT
-static inline PUCHAR STA_Build_AMSDU_Frame_Header(
-	IN RTMP_ADAPTER *pAd,
-	IN TX_BLK		*pTxBlk)
-{
-	PUCHAR			pHeaderBufPtr;//, pSaveBufPtr;
-	HEADER_802_11	*pHeader_802_11;
-
-
-	STAFindCipherAlgorithm(pAd, pTxBlk);
-	STABuildCommon802_11Header(pAd, pTxBlk);
-
-	pHeaderBufPtr = &pTxBlk->HeaderBuf[TXINFO_SIZE + TXWI_SIZE];
-	pHeader_802_11 = (HEADER_802_11 *) pHeaderBufPtr;
-
-	// skip common header
-	pHeaderBufPtr += pTxBlk->MpduHeaderLen;
-
-	//
-	// build QOS Control bytes
-	//
-	*pHeaderBufPtr = (pTxBlk->UserPriority & 0x0F);
-
-	//
-	// A-MSDU packet
-	//
-	*pHeaderBufPtr |= 0x80;
-
-	*(pHeaderBufPtr+1) = 0;
-	pHeaderBufPtr +=2;
-	pTxBlk->MpduHeaderLen += 2;
-
-	//pSaveBufPtr = pHeaderBufPtr;
-
-	//
-	// padding at front of LLC header
-	// LLC header should locate at 4-octets aligment
-	//
-	// @@@ MpduHeaderLen excluding padding @@@
-	//
-	pTxBlk->HdrPadLen = (ULONG)pHeaderBufPtr;
-	pHeaderBufPtr = (PCHAR) ROUND_UP(pHeaderBufPtr, 4);
-	pTxBlk->HdrPadLen = (ULONG)(pHeaderBufPtr - pTxBlk->HdrPadLen);
-
-	return pHeaderBufPtr;
-
-}
-
-
-VOID STA_AMPDU_Frame_Tx(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk)
-{
-	HEADER_802_11	*pHeader_802_11;
-	PUCHAR			pHeaderBufPtr;
-	USHORT			FreeNumber;
-	MAC_TABLE_ENTRY	*pMacEntry;
-	BOOLEAN			bVLANPkt;
-	PQUEUE_ENTRY	pQEntry;
-
-	ASSERT(pTxBlk);
-
-	while(pTxBlk->TxPacketList.Head)
-	{
-		pQEntry = RemoveHeadQueue(&pTxBlk->TxPacketList);
-		pTxBlk->pPacket = QUEUE_ENTRY_TO_PACKET(pQEntry);
-		if ( RTMP_FillTxBlkInfo(pAd, pTxBlk) != TRUE)
-		{
-			RELEASE_NDIS_PACKET(pAd, pTxBlk->pPacket, NDIS_STATUS_FAILURE);
-			continue;
-		}
-
-		bVLANPkt = (RTMP_GET_PACKET_VLAN(pTxBlk->pPacket) ? TRUE : FALSE);
-
-		pMacEntry = pTxBlk->pMacEntry;
-		if (pMacEntry->isCached)
-		{
-			// NOTE: Please make sure the size of pMacEntry->CachedBuf[] is smaller than pTxBlk->HeaderBuf[]!!!!
-			NdisMoveMemory((PUCHAR)&pTxBlk->HeaderBuf[TXINFO_SIZE], (PUCHAR)&pMacEntry->CachedBuf[0], TXWI_SIZE + sizeof(HEADER_802_11));
-			pHeaderBufPtr = (PUCHAR)(&pTxBlk->HeaderBuf[TXINFO_SIZE + TXWI_SIZE]);
-			STABuildCache802_11Header(pAd, pTxBlk, pHeaderBufPtr);
-		}
-		else
-		{
-			STAFindCipherAlgorithm(pAd, pTxBlk);
-			STABuildCommon802_11Header(pAd, pTxBlk);
-
-			pHeaderBufPtr = &pTxBlk->HeaderBuf[TXINFO_SIZE + TXWI_SIZE];
-		}
-
-
-		pHeader_802_11 = (HEADER_802_11 *) pHeaderBufPtr;
-
-		// skip common header
-		pHeaderBufPtr += pTxBlk->MpduHeaderLen;
-
-		//
-		// build QOS Control bytes
-		//
-		*pHeaderBufPtr = (pTxBlk->UserPriority & 0x0F);
-		*(pHeaderBufPtr+1) = 0;
-		pHeaderBufPtr +=2;
-		pTxBlk->MpduHeaderLen += 2;
-
-		//
-		// build HTC+
-		// HTC control filed following QoS field
-		//
-		if ((pAd->CommonCfg.bRdg == TRUE) && CLIENT_STATUS_TEST_FLAG(pTxBlk->pMacEntry, fCLIENT_STATUS_RDG_CAPABLE))
-		{
-			if (pMacEntry->isCached == FALSE)
-			{
-				// mark HTC bit
-				pHeader_802_11->FC.Order = 1;
-
-				NdisZeroMemory(pHeaderBufPtr, 4);
-				*(pHeaderBufPtr+3) |= 0x80;
-			}
-			pHeaderBufPtr += 4;
-			pTxBlk->MpduHeaderLen += 4;
-		}
-
-		//pTxBlk->MpduHeaderLen = pHeaderBufPtr - pTxBlk->HeaderBuf - TXWI_SIZE - TXINFO_SIZE;
-		ASSERT(pTxBlk->MpduHeaderLen >= 24);
-
-		// skip 802.3 header
-		pTxBlk->pSrcBufData = pTxBlk->pSrcBufHeader + LENGTH_802_3;
-		pTxBlk->SrcBufLen  -= LENGTH_802_3;
-
-		// skip vlan tag
-		if (bVLANPkt)
-		{
-			pTxBlk->pSrcBufData	+= LENGTH_802_1Q;
-			pTxBlk->SrcBufLen	-= LENGTH_802_1Q;
-		}
-
-		//
-		// padding at front of LLC header
-		// LLC header should locate at 4-octets aligment
-		//
-		// @@@ MpduHeaderLen excluding padding @@@
-		//
-		pTxBlk->HdrPadLen = (ULONG)pHeaderBufPtr;
-		pHeaderBufPtr = (PCHAR) ROUND_UP(pHeaderBufPtr, 4);
-		pTxBlk->HdrPadLen = (ULONG)(pHeaderBufPtr - pTxBlk->HdrPadLen);
-
-		{
-
-			//
-			// Insert LLC-SNAP encapsulation - 8 octets
-			//
-			EXTRA_LLCSNAP_ENCAP_FROM_PKT_OFFSET(pTxBlk->pSrcBufData-2, pTxBlk->pExtraLlcSnapEncap);
-			if (pTxBlk->pExtraLlcSnapEncap)
-			{
-				NdisMoveMemory(pHeaderBufPtr, pTxBlk->pExtraLlcSnapEncap, 6);
-				pHeaderBufPtr += 6;
-				// get 2 octets (TypeofLen)
-				NdisMoveMemory(pHeaderBufPtr, pTxBlk->pSrcBufData-2, 2);
-				pHeaderBufPtr += 2;
-				pTxBlk->MpduHeaderLen += LENGTH_802_1_H;
-			}
-
-		}
-
-		if (pMacEntry->isCached)
-		{
-            RTMPWriteTxWI_Cache(pAd, (PTXWI_STRUC)(&pTxBlk->HeaderBuf[TXINFO_SIZE]), pTxBlk);
-		}
-		else
-		{
-			RTMPWriteTxWI_Data(pAd, (PTXWI_STRUC)(&pTxBlk->HeaderBuf[TXINFO_SIZE]), pTxBlk);
-
-			NdisZeroMemory((PUCHAR)(&pMacEntry->CachedBuf[0]), sizeof(pMacEntry->CachedBuf));
-			NdisMoveMemory((PUCHAR)(&pMacEntry->CachedBuf[0]), (PUCHAR)(&pTxBlk->HeaderBuf[TXINFO_SIZE]), (pHeaderBufPtr - (PUCHAR)(&pTxBlk->HeaderBuf[TXINFO_SIZE])));
-			pMacEntry->isCached = TRUE;
-		}
-
-		// calculate Transmitted AMPDU count and ByteCount
-		{
-			pAd->RalinkCounters.TransmittedMPDUsInAMPDUCount.u.LowPart ++;
-			pAd->RalinkCounters.TransmittedOctetsInAMPDUCount.QuadPart += pTxBlk->SrcBufLen;
-		}
-
-		//FreeNumber = GET_TXRING_FREENO(pAd, QueIdx);
-
-		HAL_WriteTxResource(pAd, pTxBlk, TRUE, &FreeNumber);
-
-		//
-		// Kick out Tx
-		//
-		HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx);
-
-		pAd->RalinkCounters.KickTxCount++;
-		pAd->RalinkCounters.OneSecTxDoneCount++;
-	}
-
-}
-
-
-VOID STA_AMSDU_Frame_Tx(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk)
-{
-	PUCHAR			pHeaderBufPtr;
-	USHORT			FreeNumber;
-	USHORT			subFramePayloadLen = 0;	// AMSDU Subframe length without AMSDU-Header / Padding.
-	USHORT			totalMPDUSize=0;
-	UCHAR			*subFrameHeader;
-	UCHAR			padding = 0;
-	USHORT			FirstTx = 0, LastTxIdx = 0;
-	BOOLEAN			bVLANPkt;
-	int 			frameNum = 0;
-	PQUEUE_ENTRY	pQEntry;
-
-
-	ASSERT(pTxBlk);
-
-	ASSERT((pTxBlk->TxPacketList.Number > 1));
-
-	while(pTxBlk->TxPacketList.Head)
-	{
-		pQEntry = RemoveHeadQueue(&pTxBlk->TxPacketList);
-		pTxBlk->pPacket = QUEUE_ENTRY_TO_PACKET(pQEntry);
-		if (RTMP_FillTxBlkInfo(pAd, pTxBlk) != TRUE)
-		{
-			RELEASE_NDIS_PACKET(pAd, pTxBlk->pPacket, NDIS_STATUS_FAILURE);
-			continue;
-		}
-
-		bVLANPkt = (RTMP_GET_PACKET_VLAN(pTxBlk->pPacket) ? TRUE : FALSE);
-
-		// skip 802.3 header
-		pTxBlk->pSrcBufData = pTxBlk->pSrcBufHeader + LENGTH_802_3;
-		pTxBlk->SrcBufLen  -= LENGTH_802_3;
-
-		// skip vlan tag
-		if (bVLANPkt)
-		{
-			pTxBlk->pSrcBufData	+= LENGTH_802_1Q;
-			pTxBlk->SrcBufLen	-= LENGTH_802_1Q;
-		}
-
-		if (frameNum == 0)
-		{
-			pHeaderBufPtr = STA_Build_AMSDU_Frame_Header(pAd, pTxBlk);
-
-			// NOTE: TxWI->MPDUtotalByteCount will be updated after final frame was handled.
-			RTMPWriteTxWI_Data(pAd, (PTXWI_STRUC)(&pTxBlk->HeaderBuf[TXINFO_SIZE]), pTxBlk);
-		}
-		else
-		{
-			pHeaderBufPtr = &pTxBlk->HeaderBuf[0];
-			padding = ROUND_UP(LENGTH_AMSDU_SUBFRAMEHEAD + subFramePayloadLen, 4) - (LENGTH_AMSDU_SUBFRAMEHEAD + subFramePayloadLen);
-			NdisZeroMemory(pHeaderBufPtr, padding + LENGTH_AMSDU_SUBFRAMEHEAD);
-			pHeaderBufPtr += padding;
-			pTxBlk->MpduHeaderLen = padding;
-		}
-
-		//
-		// A-MSDU subframe
-		//   DA(6)+SA(6)+Length(2) + LLC/SNAP Encap
-		//
-		subFrameHeader = pHeaderBufPtr;
-		subFramePayloadLen = pTxBlk->SrcBufLen;
-
-		NdisMoveMemory(subFrameHeader, pTxBlk->pSrcBufHeader, 12);
-
-
-		pHeaderBufPtr += LENGTH_AMSDU_SUBFRAMEHEAD;
-		pTxBlk->MpduHeaderLen += LENGTH_AMSDU_SUBFRAMEHEAD;
-
-
-		//
-		// Insert LLC-SNAP encapsulation - 8 octets
-		//
-		EXTRA_LLCSNAP_ENCAP_FROM_PKT_OFFSET(pTxBlk->pSrcBufData-2, pTxBlk->pExtraLlcSnapEncap);
-
-		subFramePayloadLen = pTxBlk->SrcBufLen;
-
-		if (pTxBlk->pExtraLlcSnapEncap)
-		{
-			NdisMoveMemory(pHeaderBufPtr, pTxBlk->pExtraLlcSnapEncap, 6);
-			pHeaderBufPtr += 6;
-			// get 2 octets (TypeofLen)
-			NdisMoveMemory(pHeaderBufPtr, pTxBlk->pSrcBufData-2, 2);
-			pHeaderBufPtr += 2;
-			pTxBlk->MpduHeaderLen += LENGTH_802_1_H;
-			subFramePayloadLen += LENGTH_802_1_H;
-		}
-
-		// update subFrame Length field
-		subFrameHeader[12] = (subFramePayloadLen & 0xFF00) >> 8;
-		subFrameHeader[13] = subFramePayloadLen & 0xFF;
-
-		totalMPDUSize += pTxBlk->MpduHeaderLen + pTxBlk->SrcBufLen;
-
-		if (frameNum ==0)
-			FirstTx = HAL_WriteMultiTxResource(pAd, pTxBlk, frameNum, &FreeNumber);
-		else
-			LastTxIdx = HAL_WriteMultiTxResource(pAd, pTxBlk, frameNum, &FreeNumber);
-
-		frameNum++;
-
-		pAd->RalinkCounters.KickTxCount++;
-		pAd->RalinkCounters.OneSecTxDoneCount++;
-
-		// calculate Transmitted AMSDU Count and ByteCount
-		{
-			pAd->RalinkCounters.TransmittedAMSDUCount.u.LowPart ++;
-			pAd->RalinkCounters.TransmittedOctetsInAMSDU.QuadPart += totalMPDUSize;
-		}
-
-	}
-
-	HAL_FinalWriteTxResource(pAd, pTxBlk, totalMPDUSize, FirstTx);
-	HAL_LastTxIdx(pAd, pTxBlk->QueIdx, LastTxIdx);
-
-	//
-	// Kick out Tx
-	//
-	HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx);
-}
-#endif // DOT11_N_SUPPORT //
-
-VOID STA_Legacy_Frame_Tx(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk)
-{
-	HEADER_802_11	*pHeader_802_11;
-	PUCHAR			pHeaderBufPtr;
-	USHORT			FreeNumber;
-	BOOLEAN			bVLANPkt;
-	PQUEUE_ENTRY	pQEntry;
-
-	ASSERT(pTxBlk);
-
-
-	pQEntry = RemoveHeadQueue(&pTxBlk->TxPacketList);
-	pTxBlk->pPacket = QUEUE_ENTRY_TO_PACKET(pQEntry);
-	if (RTMP_FillTxBlkInfo(pAd, pTxBlk) != TRUE)
-	{
-		RELEASE_NDIS_PACKET(pAd, pTxBlk->pPacket, NDIS_STATUS_FAILURE);
-		return;
-	}
-
-	if (pTxBlk->TxFrameType == TX_MCAST_FRAME)
-	{
-		INC_COUNTER64(pAd->WlanCounters.MulticastTransmittedFrameCount);
-	}
-
-	if (RTMP_GET_PACKET_RTS(pTxBlk->pPacket))
-		TX_BLK_SET_FLAG(pTxBlk, fTX_bRtsRequired);
-	else
-		TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bRtsRequired);
-
-	bVLANPkt = (RTMP_GET_PACKET_VLAN(pTxBlk->pPacket) ? TRUE : FALSE);
-
-	if (pTxBlk->TxRate < pAd->CommonCfg.MinTxRate)
-		pTxBlk->TxRate = pAd->CommonCfg.MinTxRate;
-
-	STAFindCipherAlgorithm(pAd, pTxBlk);
-	STABuildCommon802_11Header(pAd, pTxBlk);
-
-
-	// skip 802.3 header
-	pTxBlk->pSrcBufData = pTxBlk->pSrcBufHeader + LENGTH_802_3;
-	pTxBlk->SrcBufLen  -= LENGTH_802_3;
-
-	// skip vlan tag
-	if (bVLANPkt)
-	{
-		pTxBlk->pSrcBufData	+= LENGTH_802_1Q;
-		pTxBlk->SrcBufLen	-= LENGTH_802_1Q;
-	}
-
-	pHeaderBufPtr = &pTxBlk->HeaderBuf[TXINFO_SIZE + TXWI_SIZE];
-	pHeader_802_11 = (HEADER_802_11 *) pHeaderBufPtr;
-
-	// skip common header
-	pHeaderBufPtr += pTxBlk->MpduHeaderLen;
-
-	if (TX_BLK_TEST_FLAG(pTxBlk, fTX_bWMM))
-	{
-		//
-		// build QOS Control bytes
-		//
-		*pHeaderBufPtr = (pTxBlk->UserPriority & 0x0F);
-		*(pHeaderBufPtr+1) = 0;
-		pHeaderBufPtr +=2;
-		pTxBlk->MpduHeaderLen += 2;
-	}
-
-	// The remaining content of MPDU header should locate at 4-octets aligment
-	pTxBlk->HdrPadLen = (ULONG)pHeaderBufPtr;
-	pHeaderBufPtr = (PCHAR) ROUND_UP(pHeaderBufPtr, 4);
-	pTxBlk->HdrPadLen = (ULONG)(pHeaderBufPtr - pTxBlk->HdrPadLen);
-
-	{
-
-		//
-		// Insert LLC-SNAP encapsulation - 8 octets
-		//
-		//
-   		// if original Ethernet frame contains no LLC/SNAP,
-		// then an extra LLC/SNAP encap is required
-		//
-		EXTRA_LLCSNAP_ENCAP_FROM_PKT_START(pTxBlk->pSrcBufHeader, pTxBlk->pExtraLlcSnapEncap);
-		if (pTxBlk->pExtraLlcSnapEncap)
-		{
-			UCHAR vlan_size;
-
-			NdisMoveMemory(pHeaderBufPtr, pTxBlk->pExtraLlcSnapEncap, 6);
-			pHeaderBufPtr += 6;
-			// skip vlan tag
-			vlan_size =  (bVLANPkt) ? LENGTH_802_1Q : 0;
-			// get 2 octets (TypeofLen)
-			NdisMoveMemory(pHeaderBufPtr, pTxBlk->pSrcBufHeader+12+vlan_size, 2);
-			pHeaderBufPtr += 2;
-			pTxBlk->MpduHeaderLen += LENGTH_802_1_H;
-		}
-
-	}
-
-	//
-	// prepare for TXWI
-	// use Wcid as Key Index
-	//
-
-	RTMPWriteTxWI_Data(pAd, (PTXWI_STRUC)(&pTxBlk->HeaderBuf[TXINFO_SIZE]), pTxBlk);
-
-	//FreeNumber = GET_TXRING_FREENO(pAd, QueIdx);
-
-	HAL_WriteTxResource(pAd, pTxBlk, TRUE, &FreeNumber);
-
-	pAd->RalinkCounters.KickTxCount++;
-	pAd->RalinkCounters.OneSecTxDoneCount++;
-
-	//
-	// Kick out Tx
-	//
-	HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx);
-}
-
-
-VOID STA_ARalink_Frame_Tx(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk)
-{
-	PUCHAR			pHeaderBufPtr;
-	USHORT			FreeNumber;
-	USHORT			totalMPDUSize=0;
-	USHORT			FirstTx, LastTxIdx;
-	int 			frameNum = 0;
-	BOOLEAN			bVLANPkt;
-	PQUEUE_ENTRY	pQEntry;
-
-
-	ASSERT(pTxBlk);
-
-	ASSERT((pTxBlk->TxPacketList.Number== 2));
-
-
-	FirstTx = LastTxIdx = 0;  // Is it ok init they as 0?
-	while(pTxBlk->TxPacketList.Head)
-	{
-		pQEntry = RemoveHeadQueue(&pTxBlk->TxPacketList);
-		pTxBlk->pPacket = QUEUE_ENTRY_TO_PACKET(pQEntry);
-
-		if (RTMP_FillTxBlkInfo(pAd, pTxBlk) != TRUE)
-		{
-			RELEASE_NDIS_PACKET(pAd, pTxBlk->pPacket, NDIS_STATUS_FAILURE);
-			continue;
-		}
-
-		bVLANPkt = (RTMP_GET_PACKET_VLAN(pTxBlk->pPacket) ? TRUE : FALSE);
-
-		// skip 802.3 header
-		pTxBlk->pSrcBufData = pTxBlk->pSrcBufHeader + LENGTH_802_3;
-		pTxBlk->SrcBufLen  -= LENGTH_802_3;
-
-		// skip vlan tag
-		if (bVLANPkt)
-		{
-			pTxBlk->pSrcBufData	+= LENGTH_802_1Q;
-			pTxBlk->SrcBufLen	-= LENGTH_802_1Q;
-		}
-
-		if (frameNum == 0)
-		{	// For first frame, we need to create the 802.11 header + padding(optional) + RA-AGG-LEN + SNAP Header
-
-			pHeaderBufPtr = STA_Build_ARalink_Frame_Header(pAd, pTxBlk);
-
-			// It's ok write the TxWI here, because the TxWI->MPDUtotalByteCount
-			//	will be updated after final frame was handled.
-			RTMPWriteTxWI_Data(pAd, (PTXWI_STRUC)(&pTxBlk->HeaderBuf[TXINFO_SIZE]), pTxBlk);
-
-
-			//
-			// Insert LLC-SNAP encapsulation - 8 octets
-			//
-			EXTRA_LLCSNAP_ENCAP_FROM_PKT_OFFSET(pTxBlk->pSrcBufData-2, pTxBlk->pExtraLlcSnapEncap);
-
-			if (pTxBlk->pExtraLlcSnapEncap)
-			{
-				NdisMoveMemory(pHeaderBufPtr, pTxBlk->pExtraLlcSnapEncap, 6);
-				pHeaderBufPtr += 6;
-				// get 2 octets (TypeofLen)
-				NdisMoveMemory(pHeaderBufPtr, pTxBlk->pSrcBufData-2, 2);
-				pHeaderBufPtr += 2;
-				pTxBlk->MpduHeaderLen += LENGTH_802_1_H;
-			}
-		}
-		else
-		{	// For second aggregated frame, we need create the 802.3 header to headerBuf, because PCI will copy it to SDPtr0.
-
-			pHeaderBufPtr = &pTxBlk->HeaderBuf[0];
-			pTxBlk->MpduHeaderLen = 0;
-
-			// A-Ralink sub-sequent frame header is the same as 802.3 header.
-			//   DA(6)+SA(6)+FrameType(2)
-			NdisMoveMemory(pHeaderBufPtr, pTxBlk->pSrcBufHeader, 12);
-			pHeaderBufPtr += 12;
-			// get 2 octets (TypeofLen)
-			NdisMoveMemory(pHeaderBufPtr, pTxBlk->pSrcBufData-2, 2);
-			pHeaderBufPtr += 2;
-			pTxBlk->MpduHeaderLen = LENGTH_ARALINK_SUBFRAMEHEAD;
-		}
-
-		totalMPDUSize += pTxBlk->MpduHeaderLen + pTxBlk->SrcBufLen;
-
-		//FreeNumber = GET_TXRING_FREENO(pAd, QueIdx);
-		if (frameNum ==0)
-			FirstTx = HAL_WriteMultiTxResource(pAd, pTxBlk, frameNum, &FreeNumber);
-		else
-			LastTxIdx = HAL_WriteMultiTxResource(pAd, pTxBlk, frameNum, &FreeNumber);
-
-		frameNum++;
-
-		pAd->RalinkCounters.OneSecTxAggregationCount++;
-		pAd->RalinkCounters.KickTxCount++;
-		pAd->RalinkCounters.OneSecTxDoneCount++;
-
-	}
-
-	HAL_FinalWriteTxResource(pAd, pTxBlk, totalMPDUSize, FirstTx);
-	HAL_LastTxIdx(pAd, pTxBlk->QueIdx, LastTxIdx);
-
-	//
-	// Kick out Tx
-	//
-	HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx);
-
-}
-
-
-VOID STA_Fragment_Frame_Tx(
-	IN RTMP_ADAPTER *pAd,
-	IN TX_BLK		*pTxBlk)
-{
-	HEADER_802_11	*pHeader_802_11;
-	PUCHAR			pHeaderBufPtr;
-	USHORT			FreeNumber;
-	UCHAR 			fragNum = 0;
-	PACKET_INFO		PacketInfo;
-	USHORT			EncryptionOverhead = 0;
-	UINT32			FreeMpduSize, SrcRemainingBytes;
-	USHORT			AckDuration;
-	UINT 			NextMpduSize;
-	BOOLEAN			bVLANPkt;
-	PQUEUE_ENTRY	pQEntry;
-
-
-	ASSERT(pTxBlk);
-
-	pQEntry = RemoveHeadQueue(&pTxBlk->TxPacketList);
-	pTxBlk->pPacket = QUEUE_ENTRY_TO_PACKET(pQEntry);
-	if (RTMP_FillTxBlkInfo(pAd, pTxBlk) != TRUE)
-	{
-		RELEASE_NDIS_PACKET(pAd, pTxBlk->pPacket, NDIS_STATUS_FAILURE);
-		return;
-	}
-
-	ASSERT(TX_BLK_TEST_FLAG(pTxBlk, fTX_bAllowFrag));
-	bVLANPkt = (RTMP_GET_PACKET_VLAN(pTxBlk->pPacket) ? TRUE : FALSE);
-
-	STAFindCipherAlgorithm(pAd, pTxBlk);
-	STABuildCommon802_11Header(pAd, pTxBlk);
-
-	if (pTxBlk->CipherAlg == CIPHER_TKIP)
-	{
-		pTxBlk->pPacket = duplicate_pkt_with_TKIP_MIC(pAd, pTxBlk->pPacket);
-		if (pTxBlk->pPacket == NULL)
-			return;
-		RTMP_QueryPacketInfo(pTxBlk->pPacket, &PacketInfo, &pTxBlk->pSrcBufHeader, &pTxBlk->SrcBufLen);
-	}
-
-	// skip 802.3 header
-	pTxBlk->pSrcBufData = pTxBlk->pSrcBufHeader + LENGTH_802_3;
-	pTxBlk->SrcBufLen  -= LENGTH_802_3;
-
-
-	// skip vlan tag
-	if (bVLANPkt)
-	{
-		pTxBlk->pSrcBufData	+= LENGTH_802_1Q;
-		pTxBlk->SrcBufLen	-= LENGTH_802_1Q;
-	}
-
-	pHeaderBufPtr = &pTxBlk->HeaderBuf[TXINFO_SIZE + TXWI_SIZE];
-	pHeader_802_11 = (HEADER_802_11 *)pHeaderBufPtr;
-
-
-	// skip common header
-	pHeaderBufPtr += pTxBlk->MpduHeaderLen;
-
-	if (TX_BLK_TEST_FLAG(pTxBlk, fTX_bWMM))
-	{
-		//
-		// build QOS Control bytes
-		//
-		*pHeaderBufPtr = (pTxBlk->UserPriority & 0x0F);
-
-		*(pHeaderBufPtr+1) = 0;
-		pHeaderBufPtr +=2;
-		pTxBlk->MpduHeaderLen += 2;
-	}
-
-	//
-	// padding at front of LLC header
-	// LLC header should locate at 4-octets aligment
-	//
-	pTxBlk->HdrPadLen = (ULONG)pHeaderBufPtr;
-	pHeaderBufPtr = (PCHAR) ROUND_UP(pHeaderBufPtr, 4);
-	pTxBlk->HdrPadLen = (ULONG)(pHeaderBufPtr - pTxBlk->HdrPadLen);
-
-
-
-	//
-	// Insert LLC-SNAP encapsulation - 8 octets
-	//
-	//
-   	// if original Ethernet frame contains no LLC/SNAP,
-	// then an extra LLC/SNAP encap is required
-	//
-	EXTRA_LLCSNAP_ENCAP_FROM_PKT_START(pTxBlk->pSrcBufHeader, pTxBlk->pExtraLlcSnapEncap);
-	if (pTxBlk->pExtraLlcSnapEncap)
-	{
-		UCHAR vlan_size;
-
-		NdisMoveMemory(pHeaderBufPtr, pTxBlk->pExtraLlcSnapEncap, 6);
-		pHeaderBufPtr += 6;
-		// skip vlan tag
-		vlan_size =  (bVLANPkt) ? LENGTH_802_1Q : 0;
-		// get 2 octets (TypeofLen)
-		NdisMoveMemory(pHeaderBufPtr, pTxBlk->pSrcBufHeader+12+vlan_size, 2);
-		pHeaderBufPtr += 2;
-		pTxBlk->MpduHeaderLen += LENGTH_802_1_H;
-	}
-
-
-	// If TKIP is used and fragmentation is required. Driver has to
-	//	append TKIP MIC at tail of the scatter buffer
-	//	MAC ASIC will only perform IV/EIV/ICV insertion but no TKIP MIC
-	if (pTxBlk->CipherAlg == CIPHER_TKIP)
-	{
-
-		// NOTE: DON'T refer the skb->len directly after following copy. Becasue the length is not adjust
-		//			to correct lenght, refer to pTxBlk->SrcBufLen for the packet length in following progress.
-		NdisMoveMemory(pTxBlk->pSrcBufData + pTxBlk->SrcBufLen, &pAd->PrivateInfo.Tx.MIC[0], 8);
-		//skb_put((RTPKT_TO_OSPKT(pTxBlk->pPacket))->tail, 8);
-		pTxBlk->SrcBufLen += 8;
-		pTxBlk->TotalFrameLen += 8;
-		pTxBlk->CipherAlg = CIPHER_TKIP_NO_MIC;
-	}
-
-	//
-	// calcuate the overhead bytes that encryption algorithm may add. This
-	// affects the calculate of "duration" field
-	//
-	if ((pTxBlk->CipherAlg == CIPHER_WEP64) || (pTxBlk->CipherAlg == CIPHER_WEP128))
-		EncryptionOverhead = 8; //WEP: IV[4] + ICV[4];
-	else if (pTxBlk->CipherAlg == CIPHER_TKIP_NO_MIC)
-		EncryptionOverhead = 12;//TKIP: IV[4] + EIV[4] + ICV[4], MIC will be added to TotalPacketLength
-	else if (pTxBlk->CipherAlg == CIPHER_TKIP)
-		EncryptionOverhead = 20;//TKIP: IV[4] + EIV[4] + ICV[4] + MIC[8]
-	else if (pTxBlk->CipherAlg == CIPHER_AES)
-		EncryptionOverhead = 16;	// AES: IV[4] + EIV[4] + MIC[8]
-	else
-		EncryptionOverhead = 0;
-
-	// decide how much time an ACK/CTS frame will consume in the air
-	AckDuration = RTMPCalcDuration(pAd, pAd->CommonCfg.ExpectedACKRate[pTxBlk->TxRate], 14);
-
-	// Init the total payload length of this frame.
-	SrcRemainingBytes = pTxBlk->SrcBufLen;
-
-	pTxBlk->TotalFragNum = 0xff;
-
-	do {
-
-		FreeMpduSize = pAd->CommonCfg.FragmentThreshold - LENGTH_CRC;
-
-		FreeMpduSize -= pTxBlk->MpduHeaderLen;
-
-		if (SrcRemainingBytes <= FreeMpduSize)
-		{	// this is the last or only fragment
-
-			pTxBlk->SrcBufLen = SrcRemainingBytes;
-
-			pHeader_802_11->FC.MoreFrag = 0;
-			pHeader_802_11->Duration = pAd->CommonCfg.Dsifs + AckDuration;
-
-			// Indicate the lower layer that this's the last fragment.
-			pTxBlk->TotalFragNum = fragNum;
-		}
-		else
-		{	// more fragment is required
-
-			pTxBlk->SrcBufLen = FreeMpduSize;
-
-			NextMpduSize = min(((UINT)SrcRemainingBytes - pTxBlk->SrcBufLen), ((UINT)pAd->CommonCfg.FragmentThreshold));
-			pHeader_802_11->FC.MoreFrag = 1;
-			pHeader_802_11->Duration = (3 * pAd->CommonCfg.Dsifs) + (2 * AckDuration) + RTMPCalcDuration(pAd, pTxBlk->TxRate, NextMpduSize + EncryptionOverhead);
-		}
-
-		if (fragNum == 0)
-			pTxBlk->FrameGap = IFS_HTTXOP;
-		else
-			pTxBlk->FrameGap = IFS_SIFS;
-
-		RTMPWriteTxWI_Data(pAd, (PTXWI_STRUC)(&pTxBlk->HeaderBuf[TXINFO_SIZE]), pTxBlk);
-
-		HAL_WriteFragTxResource(pAd, pTxBlk, fragNum, &FreeNumber);
-
-		pAd->RalinkCounters.KickTxCount++;
-		pAd->RalinkCounters.OneSecTxDoneCount++;
-
-		// Update the frame number, remaining size of the NDIS packet payload.
-
-		// space for 802.11 header.
-		if (fragNum == 0 && pTxBlk->pExtraLlcSnapEncap)
-			pTxBlk->MpduHeaderLen -= LENGTH_802_1_H;
-
-		fragNum++;
-		SrcRemainingBytes -= pTxBlk->SrcBufLen;
-		pTxBlk->pSrcBufData += pTxBlk->SrcBufLen;
-
-		pHeader_802_11->Frag++;	 // increase Frag #
-
-	}while(SrcRemainingBytes > 0);
-
-	//
-	// Kick out Tx
-	//
-	HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx);
-}
-
-
-#define RELEASE_FRAMES_OF_TXBLK(_pAd, _pTxBlk, _pQEntry, _Status) 										\
-		while(_pTxBlk->TxPacketList.Head)														\
-		{																						\
-			_pQEntry = RemoveHeadQueue(&_pTxBlk->TxPacketList);									\
-			RELEASE_NDIS_PACKET(_pAd, QUEUE_ENTRY_TO_PACKET(_pQEntry), _Status);	\
-		}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Copy frame from waiting queue into relative ring buffer and set
-	appropriate ASIC register to kick hardware encryption before really
-	sent out to air.
-
-	Arguments:
-		pAd 	Pointer to our adapter
-		PNDIS_PACKET	Pointer to outgoing Ndis frame
-		NumberOfFrag	Number of fragment required
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-NDIS_STATUS STAHardTransmit(
-	IN PRTMP_ADAPTER	pAd,
-	IN TX_BLK 			*pTxBlk,
-	IN	UCHAR			QueIdx)
-{
-	NDIS_PACKET		*pPacket;
-	PQUEUE_ENTRY	pQEntry;
-
-	// ---------------------------------------------
-	// STEP 0. DO SANITY CHECK AND SOME EARLY PREPARATION.
-	// ---------------------------------------------
-	//
-	ASSERT(pTxBlk->TxPacketList.Number);
-	if (pTxBlk->TxPacketList.Head == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("pTxBlk->TotalFrameNum == %ld!\n", pTxBlk->TxPacketList.Number));
-		return NDIS_STATUS_FAILURE;
-	}
-
-	pPacket = QUEUE_ENTRY_TO_PACKET(pTxBlk->TxPacketList.Head);
-
-#if 0 //def CARRIER_DETECTION_SUPPORT // Roger sync Carrier
-		if ((pAd->CommonCfg.CarrierDetect.Enable == TRUE) && (isCarrierDetectExist(pAd) == TRUE))
-	{
-		DBGPRINT(RT_DEBUG_INFO,("STAHardTransmit --> radar detect not in normal mode !!!\n"));
-		RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
-		return (NDIS_STATUS_FAILURE);
-	}
-#endif // CARRIER_DETECTION_SUPPORT //
-
-	// ------------------------------------------------------------------
-	// STEP 1. WAKE UP PHY
-	//		outgoing frame always wakeup PHY to prevent frame lost and
-	//		turn off PSM bit to improve performance
-	// ------------------------------------------------------------------
-	// not to change PSM bit, just send this frame out?
-	if ((pAd->StaCfg.Psm == PWR_SAVE) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
-	{
-	    DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicForceWakeup At HardTx\n"));
-		AsicForceWakeup(pAd, TRUE);
-	}
-
-	// It should not change PSM bit, when APSD turn on.
-	if ((!(pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable) && (pAd->CommonCfg.bAPSDForcePowerSave == FALSE))
-		|| (RTMP_GET_PACKET_EAPOL(pTxBlk->pPacket))
-		|| (RTMP_GET_PACKET_WAI(pTxBlk->pPacket)))
-	{
-		if ((pAd->StaCfg.Psm == PWR_SAVE) &&
-            (pAd->StaCfg.WindowsPowerMode == Ndis802_11PowerModeFast_PSP))
-			MlmeSetPsmBit(pAd, PWR_ACTIVE);
-	}
-
-	switch (pTxBlk->TxFrameType)
-	{
-#ifdef DOT11_N_SUPPORT
-		case TX_AMPDU_FRAME:
-				STA_AMPDU_Frame_Tx(pAd, pTxBlk);
-			break;
-		case TX_AMSDU_FRAME:
-				STA_AMSDU_Frame_Tx(pAd, pTxBlk);
-			break;
-#endif // DOT11_N_SUPPORT //
-		case TX_LEGACY_FRAME:
-				STA_Legacy_Frame_Tx(pAd, pTxBlk);
-			break;
-		case TX_MCAST_FRAME:
-				STA_Legacy_Frame_Tx(pAd, pTxBlk);
-			break;
-		case TX_RALINK_FRAME:
-				STA_ARalink_Frame_Tx(pAd, pTxBlk);
-			break;
-		case TX_FRAG_FRAME:
-				STA_Fragment_Frame_Tx(pAd, pTxBlk);
-			break;
-		default:
-			{
-				// It should not happened!
-				DBGPRINT(RT_DEBUG_ERROR, ("Send a pacekt was not classified!! It should not happen!\n"));
-				while(pTxBlk->TxPacketList.Number)
-				{
-					pQEntry = RemoveHeadQueue(&pTxBlk->TxPacketList);
-					pPacket = QUEUE_ENTRY_TO_PACKET(pQEntry);
-					if (pPacket)
-						RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
-				}
-			}
-			break;
-	}
-
-	return (NDIS_STATUS_SUCCESS);
-
-}
-
-ULONG  HashBytesPolynomial(UCHAR *value, unsigned int len)
-{
-   unsigned char *word = value;
-   unsigned int ret = 0;
-   unsigned int i;
-
-   for(i=0; i < len; i++)
-   {
-	  int mod = i % 32;
-	  ret ^=(unsigned int) (word[i]) << mod;
-	  ret ^=(unsigned int) (word[i]) >> (32 - mod);
-   }
-   return ret;
-}
-
-VOID Sta_Announce_or_Forward_802_3_Packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket,
-	IN	UCHAR			FromWhichBSSID)
-{
-	if (TRUE
-		)
-	{
-		announce_802_3_packet(pAd, pPacket);
-	}
-	else
-	{
-		// release packet
-		RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
-	}
-}
-
+#include "../../rt2860/sta/rtmp_data.c"
diff --git a/drivers/staging/rt2870/sta/sanity.c b/drivers/staging/rt2870/sta/sanity.c
index 239872464be..f1f2333bb99 100644
--- a/drivers/staging/rt2870/sta/sanity.c
+++ b/drivers/staging/rt2870/sta/sanity.c
@@ -1,420 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	sanity.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	John Chang  2004-09-01      add WMM support
-*/
-#include "../rt_config.h"
-
-extern UCHAR	CISCO_OUI[];
-
-extern UCHAR	WPA_OUI[];
-extern UCHAR	RSN_OUI[];
-extern UCHAR	WME_INFO_ELEM[];
-extern UCHAR	WME_PARM_ELEM[];
-extern UCHAR	Ccx2QosInfo[];
-extern UCHAR	RALINK_OUI[];
-extern UCHAR	BROADCOM_OUI[];
-
-/*
-    ==========================================================================
-    Description:
-        MLME message sanity check
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
- */
-BOOLEAN MlmeStartReqSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT CHAR Ssid[],
-    OUT UCHAR *pSsidLen)
-{
-    MLME_START_REQ_STRUCT *Info;
-
-    Info = (MLME_START_REQ_STRUCT *)(Msg);
-
-    if (Info->SsidLen > MAX_LEN_OF_SSID)
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("MlmeStartReqSanity fail - wrong SSID length\n"));
-        return FALSE;
-    }
-
-    *pSsidLen = Info->SsidLen;
-    NdisMoveMemory(Ssid, Info->Ssid, *pSsidLen);
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        MLME message sanity check
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-
-    IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-BOOLEAN PeerAssocRspSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *pMsg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pAddr2,
-    OUT USHORT *pCapabilityInfo,
-    OUT USHORT *pStatus,
-    OUT USHORT *pAid,
-    OUT UCHAR SupRate[],
-    OUT UCHAR *pSupRateLen,
-    OUT UCHAR ExtRate[],
-    OUT UCHAR *pExtRateLen,
-    OUT HT_CAPABILITY_IE		*pHtCapability,
-    OUT ADD_HT_INFO_IE		*pAddHtInfo,	// AP might use this additional ht info IE
-    OUT UCHAR			*pHtCapabilityLen,
-    OUT UCHAR			*pAddHtInfoLen,
-    OUT UCHAR			*pNewExtChannelOffset,
-    OUT PEDCA_PARM pEdcaParm,
-    OUT UCHAR *pCkipFlag)
-{
-    CHAR          IeType, *Ptr;
-    PFRAME_802_11 pFrame = (PFRAME_802_11)pMsg;
-    PEID_STRUCT   pEid;
-    ULONG         Length = 0;
-
-	*pNewExtChannelOffset = 0xff;
-	*pHtCapabilityLen = 0;
-	*pAddHtInfoLen = 0;
-    COPY_MAC_ADDR(pAddr2, pFrame->Hdr.Addr2);
-    Ptr = pFrame->Octet;
-    Length += LENGTH_802_11;
-
-    NdisMoveMemory(pCapabilityInfo, &pFrame->Octet[0], 2);
-    Length += 2;
-    NdisMoveMemory(pStatus,         &pFrame->Octet[2], 2);
-    Length += 2;
-    *pCkipFlag = 0;
-    *pExtRateLen = 0;
-    pEdcaParm->bValid = FALSE;
-
-    if (*pStatus != MLME_SUCCESS)
-        return TRUE;
-
-    NdisMoveMemory(pAid, &pFrame->Octet[4], 2);
-    Length += 2;
-
-    // Aid already swaped byte order in RTMPFrameEndianChange() for big endian platform
-    *pAid = (*pAid) & 0x3fff; // AID is low 14-bit
-
-    // -- get supported rates from payload and advance the pointer
-    IeType = pFrame->Octet[6];
-    *pSupRateLen = pFrame->Octet[7];
-    if ((IeType != IE_SUPP_RATES) || (*pSupRateLen > MAX_LEN_OF_SUPPORTED_RATES))
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("PeerAssocRspSanity fail - wrong SupportedRates IE\n"));
-        return FALSE;
-    }
-    else
-        NdisMoveMemory(SupRate, &pFrame->Octet[8], *pSupRateLen);
-
-    Length = Length + 2 + *pSupRateLen;
-
-    // many AP implement proprietary IEs in non-standard order, we'd better
-    // tolerate mis-ordered IEs to get best compatibility
-    pEid = (PEID_STRUCT) &pFrame->Octet[8 + (*pSupRateLen)];
-
-    // get variable fields from payload and advance the pointer
-    while ((Length + 2 + pEid->Len) <= MsgLen)
-    {
-        switch (pEid->Eid)
-        {
-            case IE_EXT_SUPP_RATES:
-                if (pEid->Len <= MAX_LEN_OF_SUPPORTED_RATES)
-                {
-                    NdisMoveMemory(ExtRate, pEid->Octet, pEid->Len);
-                    *pExtRateLen = pEid->Len;
-                }
-                break;
-
-             case IE_HT_CAP:
-            case IE_HT_CAP2:
-			if (pEid->Len >= SIZE_HT_CAP_IE)  //Note: allow extension.!!
-			{
-				NdisMoveMemory(pHtCapability, pEid->Octet, SIZE_HT_CAP_IE);
-
-				*(USHORT *)(&pHtCapability->HtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->HtCapInfo));
-				*(USHORT *)(&pHtCapability->ExtHtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->ExtHtCapInfo));
-
-				*pHtCapabilityLen = SIZE_HT_CAP_IE;
-			}
-			else
-			{
-				DBGPRINT(RT_DEBUG_WARN, ("PeerAssocRspSanity - wrong IE_HT_CAP. \n"));
-			}
-
-		break;
-#ifdef DOT11_N_SUPPORT
-            case IE_ADD_HT:
-            case IE_ADD_HT2:
-			if (pEid->Len >= sizeof(ADD_HT_INFO_IE))
-			{
-				// This IE allows extension, but we can ignore extra bytes beyond our knowledge , so only
-				// copy first sizeof(ADD_HT_INFO_IE)
-				NdisMoveMemory(pAddHtInfo, pEid->Octet, sizeof(ADD_HT_INFO_IE));
-
-				*(USHORT *)(&pAddHtInfo->AddHtInfo2) = cpu2le16(*(USHORT *)(&pAddHtInfo->AddHtInfo2));
-				*(USHORT *)(&pAddHtInfo->AddHtInfo3) = cpu2le16(*(USHORT *)(&pAddHtInfo->AddHtInfo3));
-
-				*pAddHtInfoLen = SIZE_ADD_HT_INFO_IE;
-			}
-			else
-			{
-				DBGPRINT(RT_DEBUG_WARN, ("PeerAssocRspSanity - wrong IE_ADD_HT. \n"));
-			}
-
-		break;
-            case IE_SECONDARY_CH_OFFSET:
-			if (pEid->Len == 1)
-			{
-				*pNewExtChannelOffset = pEid->Octet[0];
-			}
-			else
-			{
-				DBGPRINT(RT_DEBUG_WARN, ("PeerAssocRspSanity - wrong IE_SECONDARY_CH_OFFSET. \n"));
-			}
-#endif // DOT11_N_SUPPORT //
-		break;
-            case IE_AIRONET_CKIP:
-                // 0. Check Aironet IE length, it must be larger or equal to 28
-                //    Cisco's AP VxWork version(will not be supported) used this IE length as 28
-                //    Cisco's AP IOS version used this IE length as 30
-                if (pEid->Len < (CKIP_NEGOTIATION_LENGTH - 2))
-                break;
-
-                // 1. Copy CKIP flag byte to buffer for process
-                *pCkipFlag = *(pEid->Octet + 8);
-                break;
-
-            case IE_AIRONET_IPADDRESS:
-                if (pEid->Len != 0x0A)
-                break;
-
-                // Get Cisco Aironet IP information
-                if (NdisEqualMemory(pEid->Octet, CISCO_OUI, 3) == 1)
-                    NdisMoveMemory(pAd->StaCfg.AironetIPAddress, pEid->Octet + 4, 4);
-                break;
-
-            // CCX2, WMM use the same IE value
-            // case IE_CCX_V2:
-            case IE_VENDOR_SPECIFIC:
-                // handle WME PARAMTER ELEMENT
-                if (NdisEqualMemory(pEid->Octet, WME_PARM_ELEM, 6) && (pEid->Len == 24))
-                {
-                    PUCHAR ptr;
-                    int i;
-
-                    // parsing EDCA parameters
-                    pEdcaParm->bValid          = TRUE;
-                    pEdcaParm->bQAck           = FALSE; // pEid->Octet[0] & 0x10;
-                    pEdcaParm->bQueueRequest   = FALSE; // pEid->Octet[0] & 0x20;
-                    pEdcaParm->bTxopRequest    = FALSE; // pEid->Octet[0] & 0x40;
-                    //pEdcaParm->bMoreDataAck    = FALSE; // pEid->Octet[0] & 0x80;
-                    pEdcaParm->EdcaUpdateCount = pEid->Octet[6] & 0x0f;
-                    pEdcaParm->bAPSDCapable    = (pEid->Octet[6] & 0x80) ? 1 : 0;
-                    ptr = &pEid->Octet[8];
-                    for (i=0; i<4; i++)
-                    {
-                        UCHAR aci = (*ptr & 0x60) >> 5; // b5~6 is AC INDEX
-                        pEdcaParm->bACM[aci]  = (((*ptr) & 0x10) == 0x10);   // b5 is ACM
-                        pEdcaParm->Aifsn[aci] = (*ptr) & 0x0f;               // b0~3 is AIFSN
-                        pEdcaParm->Cwmin[aci] = *(ptr+1) & 0x0f;             // b0~4 is Cwmin
-                        pEdcaParm->Cwmax[aci] = *(ptr+1) >> 4;               // b5~8 is Cwmax
-                        pEdcaParm->Txop[aci]  = *(ptr+2) + 256 * (*(ptr+3)); // in unit of 32-us
-                        ptr += 4; // point to next AC
-                    }
-                }
-
-                // handle CCX IE
-                else
-                {
-                    // 0. Check the size and CCX admin control
-                    if (pAd->StaCfg.CCXControl.field.Enable == 0)
-                        break;
-                    if (pEid->Len != 5)
-                        break;
-
-                    // Turn CCX2 if matched
-                    if (NdisEqualMemory(pEid->Octet, Ccx2IeInfo, 5) == 1)
-                        pAd->StaCfg.CCXEnable = TRUE;
-                    break;
-                }
-                break;
-
-            default:
-                DBGPRINT(RT_DEBUG_TRACE, ("PeerAssocRspSanity - ignore unrecognized EID = %d\n", pEid->Eid));
-                break;
-        }
-
-        Length = Length + 2 + pEid->Len;
-        pEid = (PEID_STRUCT)((UCHAR*)pEid + 2 + pEid->Len);
-    }
-
-    // Force CCX2 enable to TRUE for those AP didn't replay CCX v2 IE, we still force it to be on
-    if (pAd->StaCfg.CCXControl.field.Enable == 1)
-        pAd->StaCfg.CCXEnable = TRUE;
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        MLME message sanity check
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-BOOLEAN PeerProbeReqSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pAddr2,
-    OUT CHAR Ssid[],
-    OUT UCHAR *pSsidLen)
-{
-    UCHAR         Idx;
-    UCHAR	      RateLen;
-    CHAR          IeType;
-    PFRAME_802_11 pFrame = (PFRAME_802_11)Msg;
-
-    COPY_MAC_ADDR(pAddr2, pFrame->Hdr.Addr2);
-
-    if ((pFrame->Octet[0] != IE_SSID) || (pFrame->Octet[1] > MAX_LEN_OF_SSID))
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("PeerProbeReqSanity fail - wrong SSID IE(Type=%d,Len=%d)\n",pFrame->Octet[0],pFrame->Octet[1]));
-        return FALSE;
-    }
-
-    *pSsidLen = pFrame->Octet[1];
-    NdisMoveMemory(Ssid, &pFrame->Octet[2], *pSsidLen);
-
-    Idx = *pSsidLen + 2;
-
-    // -- get supported rates from payload and advance the pointer
-    IeType = pFrame->Octet[Idx];
-    RateLen = pFrame->Octet[Idx + 1];
-    if (IeType != IE_SUPP_RATES)
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("PeerProbeReqSanity fail - wrong SupportRates IE(Type=%d,Len=%d)\n",pFrame->Octet[Idx],pFrame->Octet[Idx+1]));
-        return FALSE;
-    }
-    else
-    {
-        if ((pAd->CommonCfg.PhyMode == PHY_11G) && (RateLen < 8))
-            return (FALSE);
-    }
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-BOOLEAN GetTimBit(
-    IN CHAR *Ptr,
-    IN USHORT Aid,
-    OUT UCHAR *TimLen,
-    OUT UCHAR *BcastFlag,
-    OUT UCHAR *DtimCount,
-    OUT UCHAR *DtimPeriod,
-    OUT UCHAR *MessageToMe)
-{
-    UCHAR          BitCntl, N1, N2, MyByte, MyBit;
-    CHAR          *IdxPtr;
-
-    IdxPtr = Ptr;
-
-    IdxPtr ++;
-    *TimLen = *IdxPtr;
-
-    // get DTIM Count from TIM element
-    IdxPtr ++;
-    *DtimCount = *IdxPtr;
-
-    // get DTIM Period from TIM element
-    IdxPtr++;
-    *DtimPeriod = *IdxPtr;
-
-    // get Bitmap Control from TIM element
-    IdxPtr++;
-    BitCntl = *IdxPtr;
-
-    if ((*DtimCount == 0) && (BitCntl & 0x01))
-        *BcastFlag = TRUE;
-    else
-        *BcastFlag = FALSE;
-
-    // Parse Partial Virtual Bitmap from TIM element
-    N1 = BitCntl & 0xfe;    // N1 is the first bitmap byte#
-    N2 = *TimLen - 4 + N1;  // N2 is the last bitmap byte#
-
-    if ((Aid < (N1 << 3)) || (Aid >= ((N2 + 1) << 3)))
-        *MessageToMe = FALSE;
-    else
-    {
-        MyByte = (Aid >> 3) - N1;                       // my byte position in the bitmap byte-stream
-        MyBit = Aid % 16 - ((MyByte & 0x01)? 8:0);
-
-        IdxPtr += (MyByte + 1);
-
-        //if (*IdxPtr)
-        //    DBGPRINT(RT_DEBUG_WARN, ("TIM bitmap = 0x%02x\n", *IdxPtr));
-
-        if (*IdxPtr & (0x01 << MyBit))
-            *MessageToMe = TRUE;
-        else
-            *MessageToMe = FALSE;
-    }
-
-    return TRUE;
-}
-
+#include "../../rt2860/sta/sanity.c"
diff --git a/drivers/staging/rt2870/sta/sync.c b/drivers/staging/rt2870/sta/sync.c
index a48975566e0..66c8772ad34 100644
--- a/drivers/staging/rt2870/sta/sync.c
+++ b/drivers/staging/rt2870/sta/sync.c
@@ -1,1753 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	sync.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	John Chang	2004-09-01      modified for rt2561/2661
-	Jan Lee		2006-08-01      modified for rt2860 for 802.11n
-*/
-#include "../rt_config.h"
-
-#define ADHOC_ENTRY_BEACON_LOST_TIME	(2*OS_HZ)	// 2 sec
-
-/*
-	==========================================================================
-	Description:
-		The sync state machine,
-	Parameters:
-		Sm - pointer to the state machine
-	Note:
-		the state machine looks like the following
-
-	==========================================================================
- */
-VOID SyncStateMachineInit(
-	IN PRTMP_ADAPTER pAd,
-	IN STATE_MACHINE *Sm,
-	OUT STATE_MACHINE_FUNC Trans[])
-{
-	StateMachineInit(Sm, Trans, MAX_SYNC_STATE, MAX_SYNC_MSG, (STATE_MACHINE_FUNC)Drop, SYNC_IDLE, SYNC_MACHINE_BASE);
-
-	// column 1
-	StateMachineSetAction(Sm, SYNC_IDLE, MT2_MLME_SCAN_REQ, (STATE_MACHINE_FUNC)MlmeScanReqAction);
-	StateMachineSetAction(Sm, SYNC_IDLE, MT2_MLME_JOIN_REQ, (STATE_MACHINE_FUNC)MlmeJoinReqAction);
-	StateMachineSetAction(Sm, SYNC_IDLE, MT2_MLME_START_REQ, (STATE_MACHINE_FUNC)MlmeStartReqAction);
-	StateMachineSetAction(Sm, SYNC_IDLE, MT2_PEER_BEACON, (STATE_MACHINE_FUNC)PeerBeacon);
-	StateMachineSetAction(Sm, SYNC_IDLE, MT2_PEER_PROBE_REQ, (STATE_MACHINE_FUNC)PeerProbeReqAction);
-
-	//column 2
-	StateMachineSetAction(Sm, JOIN_WAIT_BEACON, MT2_MLME_SCAN_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenScan);
-	StateMachineSetAction(Sm, JOIN_WAIT_BEACON, MT2_MLME_JOIN_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenJoin);
-	StateMachineSetAction(Sm, JOIN_WAIT_BEACON, MT2_MLME_START_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenStart);
-	StateMachineSetAction(Sm, JOIN_WAIT_BEACON, MT2_PEER_BEACON, (STATE_MACHINE_FUNC)PeerBeaconAtJoinAction);
-	StateMachineSetAction(Sm, JOIN_WAIT_BEACON, MT2_BEACON_TIMEOUT, (STATE_MACHINE_FUNC)BeaconTimeoutAtJoinAction);
-
-	// column 3
-	StateMachineSetAction(Sm, SCAN_LISTEN, MT2_MLME_SCAN_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenScan);
-	StateMachineSetAction(Sm, SCAN_LISTEN, MT2_MLME_JOIN_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenJoin);
-	StateMachineSetAction(Sm, SCAN_LISTEN, MT2_MLME_START_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenStart);
-	StateMachineSetAction(Sm, SCAN_LISTEN, MT2_PEER_BEACON, (STATE_MACHINE_FUNC)PeerBeaconAtScanAction);
-	StateMachineSetAction(Sm, SCAN_LISTEN, MT2_PEER_PROBE_RSP, (STATE_MACHINE_FUNC)PeerBeaconAtScanAction);
-	StateMachineSetAction(Sm, SCAN_LISTEN, MT2_SCAN_TIMEOUT, (STATE_MACHINE_FUNC)ScanTimeoutAction);
-
-	// timer init
-	RTMPInitTimer(pAd, &pAd->MlmeAux.BeaconTimer, GET_TIMER_FUNCTION(BeaconTimeout), pAd, FALSE);
-	RTMPInitTimer(pAd, &pAd->MlmeAux.ScanTimer, GET_TIMER_FUNCTION(ScanTimeout), pAd, FALSE);
-}
-
-/*
-	==========================================================================
-	Description:
-		Beacon timeout handler, executed in timer thread
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID BeaconTimeout(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3)
-{
-	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;
-
-	DBGPRINT(RT_DEBUG_TRACE,("SYNC - BeaconTimeout\n"));
-
-	// Do nothing if the driver is starting halt state.
-	// This might happen when timer already been fired before cancel timer with mlmehalt
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS))
-		return;
-
-#ifdef DOT11_N_SUPPORT
-	if ((pAd->CommonCfg.BBPCurrentBW == BW_40)
-		)
-	{
-		UCHAR        BBPValue = 0;
-		AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
-		AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
-		BBPValue &= (~0x18);
-		BBPValue |= 0x10;
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
-		DBGPRINT(RT_DEBUG_TRACE, ("SYNC - End of SCAN, restore to 40MHz channel %d, Total BSS[%02d]\n",pAd->CommonCfg.CentralChannel, pAd->ScanTab.BssNr));
-	}
-#endif // DOT11_N_SUPPORT //
-
-	MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_BEACON_TIMEOUT, 0, NULL);
-	RT28XX_MLME_HANDLER(pAd);
-}
-
-/*
-	==========================================================================
-	Description:
-		Scan timeout handler, executed in timer thread
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID ScanTimeout(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3)
-{
-	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;
-
-
-	// Do nothing if the driver is starting halt state.
-	// This might happen when timer already been fired before cancel timer with mlmehalt
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS))
-		return;
-
-	if (MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_SCAN_TIMEOUT, 0, NULL))
-	{
-		RT28XX_MLME_HANDLER(pAd);
-	}
-	else
-	{
-		// To prevent SyncMachine.CurrState is SCAN_LISTEN forever.
-		pAd->MlmeAux.Channel = 0;
-		ScanNextChannel(pAd);
-		if (pAd->CommonCfg.bWirelessEvent)
-		{
-			RTMPSendWirelessEvent(pAd, IW_SCAN_ENQUEUE_FAIL_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-		}
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-		MLME SCAN req state machine procedure
-	==========================================================================
- */
-VOID MlmeScanReqAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR          Ssid[MAX_LEN_OF_SSID], SsidLen, ScanType, BssType, BBPValue = 0;
-	BOOLEAN        TimerCancelled;
-	ULONG		   Now;
-	USHORT         Status;
-	PHEADER_802_11 pHdr80211;
-	PUCHAR         pOutBuffer = NULL;
-	NDIS_STATUS    NStatus;
-
-	// Check the total scan tries for one single OID command
-	// If this is the CCX 2.0 Case, skip that!
-	if ( !RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP))
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("SYNC - MlmeScanReqAction before Startup\n"));
-		return;
-	}
-
-	// Increase the scan retry counters.
-	pAd->StaCfg.ScanCnt++;
-
-
-	// first check the parameter sanity
-	if (MlmeScanReqSanity(pAd,
-						  Elem->Msg,
-						  Elem->MsgLen,
-						  &BssType,
-						  Ssid,
-						  &SsidLen,
-						  &ScanType))
-	{
-
-		// Check for channel load and noise hist request
-		// Suspend MSDU only at scan request, not the last two mentioned
-		if ((ScanType == SCAN_CISCO_NOISE) || (ScanType == SCAN_CISCO_CHANNEL_LOAD))
-		{
-			if (pAd->StaCfg.CCXScanChannel != pAd->CommonCfg.Channel)
-				RTMPSuspendMsduTransmission(pAd);			// Suspend MSDU transmission here
-		}
-		else
-		{
-			// Suspend MSDU transmission here
-			RTMPSuspendMsduTransmission(pAd);
-		}
-
-		//
-		// To prevent data lost.
-		// Send an NULL data with turned PSM bit on to current associated AP before SCAN progress.
-		// And should send an NULL data with turned PSM bit off to AP, when scan progress done
-		//
-		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) && (INFRA_ON(pAd)))
-		{
-			NStatus = MlmeAllocateMemory(pAd, (PVOID)&pOutBuffer);
-			if (NStatus	== NDIS_STATUS_SUCCESS)
-			{
-				pHdr80211 = (PHEADER_802_11) pOutBuffer;
-				MgtMacHeaderInit(pAd, pHdr80211, SUBTYPE_NULL_FUNC, 1, pAd->CommonCfg.Bssid, pAd->CommonCfg.Bssid);
-				pHdr80211->Duration = 0;
-				pHdr80211->FC.Type = BTYPE_DATA;
-				pHdr80211->FC.PwrMgmt = PWR_SAVE;
-
-				// Send using priority queue
-				MiniportMMRequest(pAd, 0, pOutBuffer, sizeof(HEADER_802_11));
-				DBGPRINT(RT_DEBUG_TRACE, ("MlmeScanReqAction -- Send PSM Data frame for off channel RM\n"));
-				MlmeFreeMemory(pAd, pOutBuffer);
-				RTMPusecDelay(5000);
-			}
-		}
-
-		NdisGetSystemUpTime(&Now);
-		pAd->StaCfg.LastScanTime = Now;
-		// reset all the timers
-		RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer, &TimerCancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &TimerCancelled);
-
-		// record desired BSS parameters
-		pAd->MlmeAux.BssType = BssType;
-		pAd->MlmeAux.ScanType = ScanType;
-		pAd->MlmeAux.SsidLen = SsidLen;
-        NdisZeroMemory(pAd->MlmeAux.Ssid, MAX_LEN_OF_SSID);
-		NdisMoveMemory(pAd->MlmeAux.Ssid, Ssid, SsidLen);
-
-		// start from the first channel
-		pAd->MlmeAux.Channel = FirstChannel(pAd);
-
-		// Change the scan channel when dealing with CCX beacon report
-		if ((ScanType == SCAN_CISCO_PASSIVE) || (ScanType == SCAN_CISCO_ACTIVE) ||
-			(ScanType == SCAN_CISCO_CHANNEL_LOAD) || (ScanType == SCAN_CISCO_NOISE))
-			pAd->MlmeAux.Channel = pAd->StaCfg.CCXScanChannel;
-
-		// Let BBP register at 20MHz to do scan
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
-		BBPValue &= (~0x18);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
-		DBGPRINT(RT_DEBUG_TRACE, ("SYNC - BBP R4 to 20MHz.l\n"));
-		ScanNextChannel(pAd);
-	}
-	else
-	{
-		DBGPRINT_ERR(("SYNC - MlmeScanReqAction() sanity check fail\n"));
-		pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
-		Status = MLME_INVALID_FORMAT;
-		MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_SCAN_CONF, 2, &Status);
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-		MLME JOIN req state machine procedure
-	==========================================================================
- */
-VOID MlmeJoinReqAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR        BBPValue = 0;
-	BSS_ENTRY    *pBss;
-	BOOLEAN       TimerCancelled;
-	HEADER_802_11 Hdr80211;
-	NDIS_STATUS   NStatus;
-	ULONG         FrameLen = 0;
-	PUCHAR        pOutBuffer = NULL;
-	PUCHAR        pSupRate = NULL;
-	UCHAR         SupRateLen;
-	PUCHAR        pExtRate = NULL;
-	UCHAR         ExtRateLen;
-	UCHAR         ASupRate[] = {0x8C, 0x12, 0x98, 0x24, 0xb0, 0x48, 0x60, 0x6C};
-	UCHAR         ASupRateLen = sizeof(ASupRate)/sizeof(UCHAR);
-	MLME_JOIN_REQ_STRUCT *pInfo = (MLME_JOIN_REQ_STRUCT *)(Elem->Msg);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("SYNC - MlmeJoinReqAction(BSS #%ld)\n", pInfo->BssIdx));
-
-
-	// reset all the timers
-	RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &TimerCancelled);
-	RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer, &TimerCancelled);
-
-	pBss = &pAd->MlmeAux.SsidBssTab.BssEntry[pInfo->BssIdx];
-
-	// record the desired SSID & BSSID we're waiting for
-	COPY_MAC_ADDR(pAd->MlmeAux.Bssid, pBss->Bssid);
-
-	// If AP's SSID is not hidden, it is OK for updating ssid to MlmeAux again.
-	if (pBss->Hidden == 0)
-	{
-		NdisMoveMemory(pAd->MlmeAux.Ssid, pBss->Ssid, pBss->SsidLen);
-		pAd->MlmeAux.SsidLen = pBss->SsidLen;
-	}
-
-	pAd->MlmeAux.BssType = pBss->BssType;
-	pAd->MlmeAux.Channel = pBss->Channel;
-	pAd->MlmeAux.CentralChannel = pBss->CentralChannel;
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-	// Country IE of the AP will be evaluated and will be used.
-	if ((pAd->StaCfg.IEEE80211dClientMode != Rt802_11_D_None) &&
-		(pBss->bHasCountryIE == TRUE))
-	{
-		NdisMoveMemory(&pAd->CommonCfg.CountryCode[0], &pBss->CountryString[0], 2);
-		if (pBss->CountryString[2] == 'I')
-			pAd->CommonCfg.Geography = IDOR;
-		else if (pBss->CountryString[2] == 'O')
-			pAd->CommonCfg.Geography = ODOR;
-		else
-			pAd->CommonCfg.Geography = BOTH;
-		BuildChannelListEx(pAd);
-	}
-#endif // EXT_BUILD_CHANNEL_LIST //
-
-	// Let BBP register at 20MHz to do scan
-	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
-	BBPValue &= (~0x18);
-	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
-	DBGPRINT(RT_DEBUG_TRACE, ("SYNC - BBP R4 to 20MHz.l\n"));
-
-	// switch channel and waiting for beacon timer
-	AsicSwitchChannel(pAd, pAd->MlmeAux.Channel, FALSE);
-	AsicLockChannel(pAd, pAd->MlmeAux.Channel);
-	RTMPSetTimer(&pAd->MlmeAux.BeaconTimer, JOIN_TIMEOUT);
-
-    do
-	{
-		if (((pAd->CommonCfg.bIEEE80211H == 1) &&
-            (pAd->MlmeAux.Channel > 14) &&
-             RadarChannelCheck(pAd, pAd->MlmeAux.Channel))
-#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier
-             || (pAd->CommonCfg.CarrierDetect.Enable == TRUE)
-#endif // CARRIER_DETECTION_SUPPORT //
-            )
-		{
-			//
-			// We can't send any Probe request frame to meet 802.11h.
-			//
-			if (pBss->Hidden == 0)
-				break;
-		}
-
-		//
-		// send probe request
-		//
-		NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);
-		if (NStatus == NDIS_STATUS_SUCCESS)
-		{
-			if (pAd->MlmeAux.Channel <= 14)
-			{
-				pSupRate = pAd->CommonCfg.SupRate;
-				SupRateLen = pAd->CommonCfg.SupRateLen;
-				pExtRate = pAd->CommonCfg.ExtRate;
-				ExtRateLen = pAd->CommonCfg.ExtRateLen;
-			}
-			else
-			{
-				//
-				// Overwrite Support Rate, CCK rate are not allowed
-				//
-				pSupRate = ASupRate;
-				SupRateLen = ASupRateLen;
-				ExtRateLen = 0;
-			}
-
-			if (pAd->MlmeAux.BssType == BSS_INFRA)
-				MgtMacHeaderInit(pAd, &Hdr80211, SUBTYPE_PROBE_REQ, 0, pAd->MlmeAux.Bssid, pAd->MlmeAux.Bssid);
-			else
-				MgtMacHeaderInit(pAd, &Hdr80211, SUBTYPE_PROBE_REQ, 0, BROADCAST_ADDR, BROADCAST_ADDR);
-
-			MakeOutgoingFrame(pOutBuffer,               &FrameLen,
-							  sizeof(HEADER_802_11),    &Hdr80211,
-							  1,                        &SsidIe,
-							  1,                        &pAd->MlmeAux.SsidLen,
-							  pAd->MlmeAux.SsidLen,	    pAd->MlmeAux.Ssid,
-							  1,                        &SupRateIe,
-							  1,                        &SupRateLen,
-							  SupRateLen,               pSupRate,
-							  END_OF_ARGS);
-
-			if (ExtRateLen)
-			{
-				ULONG Tmp;
-				MakeOutgoingFrame(pOutBuffer + FrameLen,            &Tmp,
-								  1,                                &ExtRateIe,
-								  1,                                &ExtRateLen,
-								  ExtRateLen,                       pExtRate,
-								  END_OF_ARGS);
-				FrameLen += Tmp;
-			}
-
-
-			MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-			MlmeFreeMemory(pAd, pOutBuffer);
-		}
-    } while (FALSE);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("SYNC - Switch to ch %d, Wait BEACON from %02x:%02x:%02x:%02x:%02x:%02x\n",
-		pBss->Channel, pBss->Bssid[0], pBss->Bssid[1], pBss->Bssid[2], pBss->Bssid[3], pBss->Bssid[4], pBss->Bssid[5]));
-
-	pAd->Mlme.SyncMachine.CurrState = JOIN_WAIT_BEACON;
-}
-
-/*
-	==========================================================================
-	Description:
-		MLME START Request state machine procedure, starting an IBSS
-	==========================================================================
- */
-VOID MlmeStartReqAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR         Ssid[MAX_LEN_OF_SSID], SsidLen;
-	BOOLEAN       TimerCancelled;
-
-	// New for WPA security suites
-	UCHAR						VarIE[MAX_VIE_LEN]; 	// Total VIE length = MAX_VIE_LEN - -5
-	NDIS_802_11_VARIABLE_IEs	*pVIE = NULL;
-	LARGE_INTEGER				TimeStamp;
-	BOOLEAN Privacy;
-	USHORT Status;
-
-	// Init Variable IE structure
-	pVIE = (PNDIS_802_11_VARIABLE_IEs) VarIE;
-	pVIE->Length = 0;
-	TimeStamp.u.LowPart  = 0;
-	TimeStamp.u.HighPart = 0;
-
-	if (MlmeStartReqSanity(pAd, Elem->Msg, Elem->MsgLen, Ssid, &SsidLen))
-	{
-		// reset all the timers
-		RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &TimerCancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer, &TimerCancelled);
-
-		//
-		// Start a new IBSS. All IBSS parameters are decided now....
-		//
-		DBGPRINT(RT_DEBUG_TRACE, ("MlmeStartReqAction - Start a new IBSS. All IBSS parameters are decided now.... \n"));
-		pAd->MlmeAux.BssType           = BSS_ADHOC;
-		NdisMoveMemory(pAd->MlmeAux.Ssid, Ssid, SsidLen);
-		pAd->MlmeAux.SsidLen           = SsidLen;
-
-		// generate a radom number as BSSID
-		MacAddrRandomBssid(pAd, pAd->MlmeAux.Bssid);
-		DBGPRINT(RT_DEBUG_TRACE, ("MlmeStartReqAction - generate a radom number as BSSID \n"));
-
-		Privacy = (pAd->StaCfg.WepStatus == Ndis802_11Encryption1Enabled) ||
-				  (pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled) ||
-				  (pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled);
-		pAd->MlmeAux.CapabilityInfo    = CAP_GENERATE(0,1,Privacy, (pAd->CommonCfg.TxPreamble == Rt802_11PreambleShort), 1, 0);
-		pAd->MlmeAux.BeaconPeriod      = pAd->CommonCfg.BeaconPeriod;
-		pAd->MlmeAux.AtimWin           = pAd->StaCfg.AtimWin;
-		pAd->MlmeAux.Channel           = pAd->CommonCfg.Channel;
-
-		pAd->CommonCfg.CentralChannel  = pAd->CommonCfg.Channel;
-		pAd->MlmeAux.CentralChannel    = pAd->CommonCfg.CentralChannel;
-
-		pAd->MlmeAux.SupRateLen= pAd->CommonCfg.SupRateLen;
-		NdisMoveMemory(pAd->MlmeAux.SupRate, pAd->CommonCfg.SupRate, MAX_LEN_OF_SUPPORTED_RATES);
-		RTMPCheckRates(pAd, pAd->MlmeAux.SupRate, &pAd->MlmeAux.SupRateLen);
-		pAd->MlmeAux.ExtRateLen = pAd->CommonCfg.ExtRateLen;
-		NdisMoveMemory(pAd->MlmeAux.ExtRate, pAd->CommonCfg.ExtRate, MAX_LEN_OF_SUPPORTED_RATES);
-		RTMPCheckRates(pAd, pAd->MlmeAux.ExtRate, &pAd->MlmeAux.ExtRateLen);
-#ifdef DOT11_N_SUPPORT
-		if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
-		{
-			RTMPUpdateHTIE(&pAd->CommonCfg.DesiredHtPhy, &pAd->StaCfg.DesiredHtPhyInfo.MCSSet[0], &pAd->MlmeAux.HtCapability, &pAd->MlmeAux.AddHtInfo);
-			pAd->MlmeAux.HtCapabilityLen = sizeof(HT_CAPABILITY_IE);
-			// Not turn pAd->StaActive.SupportedHtPhy.bHtEnable = TRUE here.
-			DBGPRINT(RT_DEBUG_TRACE, ("SYNC -pAd->StaActive.SupportedHtPhy.bHtEnable = TRUE\n"));
-		}
-		else
-#endif // DOT11_N_SUPPORT //
-		{
-			pAd->MlmeAux.HtCapabilityLen = 0;
-			pAd->StaActive.SupportedPhyInfo.bHtEnable = FALSE;
-		}
-		// temporarily not support QOS in IBSS
-		NdisZeroMemory(&pAd->MlmeAux.APEdcaParm, sizeof(EDCA_PARM));
-		NdisZeroMemory(&pAd->MlmeAux.APQbssLoad, sizeof(QBSS_LOAD_PARM));
-		NdisZeroMemory(&pAd->MlmeAux.APQosCapability, sizeof(QOS_CAPABILITY_PARM));
-
-		AsicSwitchChannel(pAd, pAd->MlmeAux.Channel, FALSE);
-		AsicLockChannel(pAd, pAd->MlmeAux.Channel);
-
-		DBGPRINT(RT_DEBUG_TRACE, ("SYNC - MlmeStartReqAction(ch= %d,sup rates= %d, ext rates=%d)\n",
-			pAd->MlmeAux.Channel, pAd->MlmeAux.SupRateLen, pAd->MlmeAux.ExtRateLen));
-
-		pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
-		Status = MLME_SUCCESS;
-		MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_START_CONF, 2, &Status);
-	}
-	else
-	{
-		DBGPRINT_ERR(("SYNC - MlmeStartReqAction() sanity check fail.\n"));
-		pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
-		Status = MLME_INVALID_FORMAT;
-		MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_START_CONF, 2, &Status);
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-		peer sends beacon back when scanning
-	==========================================================================
- */
-VOID PeerBeaconAtScanAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR           Bssid[MAC_ADDR_LEN], Addr2[MAC_ADDR_LEN];
-	UCHAR           Ssid[MAX_LEN_OF_SSID], BssType, Channel, NewChannel,
-					SsidLen, DtimCount, DtimPeriod, BcastFlag, MessageToMe;
-	CF_PARM         CfParm;
-	USHORT          BeaconPeriod, AtimWin, CapabilityInfo;
-	PFRAME_802_11   pFrame;
-	LARGE_INTEGER   TimeStamp;
-	UCHAR           Erp;
-	UCHAR         	SupRate[MAX_LEN_OF_SUPPORTED_RATES], ExtRate[MAX_LEN_OF_SUPPORTED_RATES];
-	UCHAR		  	SupRateLen, ExtRateLen;
-	USHORT 			LenVIE;
-	UCHAR			CkipFlag;
-	UCHAR			AironetCellPowerLimit;
-	EDCA_PARM       EdcaParm;
-	QBSS_LOAD_PARM  QbssLoad;
-	QOS_CAPABILITY_PARM QosCapability;
-	ULONG						RalinkIe;
-	UCHAR						VarIE[MAX_VIE_LEN];		// Total VIE length = MAX_VIE_LEN - -5
-	NDIS_802_11_VARIABLE_IEs	*pVIE = NULL;
-	HT_CAPABILITY_IE		HtCapability;
-	ADD_HT_INFO_IE		AddHtInfo;	// AP might use this additional ht info IE
-	UCHAR			HtCapabilityLen = 0, PreNHtCapabilityLen = 0;
-	UCHAR			AddHtInfoLen;
-	UCHAR			NewExtChannelOffset = 0xff;
-
-
-	// NdisFillMemory(Ssid, MAX_LEN_OF_SSID, 0x00);
-	pFrame = (PFRAME_802_11) Elem->Msg;
-	// Init Variable IE structure
-	pVIE = (PNDIS_802_11_VARIABLE_IEs) VarIE;
-	pVIE->Length = 0;
-#ifdef DOT11_N_SUPPORT
-    RTMPZeroMemory(&HtCapability, sizeof(HtCapability));
-	RTMPZeroMemory(&AddHtInfo, sizeof(ADD_HT_INFO_IE));
-#endif // DOT11_N_SUPPORT //
-
-	if (PeerBeaconAndProbeRspSanity(pAd,
-								Elem->Msg,
-								Elem->MsgLen,
-								Elem->Channel,
-								Addr2,
-								Bssid,
-								Ssid,
-								&SsidLen,
-								&BssType,
-								&BeaconPeriod,
-								&Channel,
-								&NewChannel,
-								&TimeStamp,
-								&CfParm,
-								&AtimWin,
-								&CapabilityInfo,
-								&Erp,
-								&DtimCount,
-								&DtimPeriod,
-								&BcastFlag,
-								&MessageToMe,
-								SupRate,
-								&SupRateLen,
-								ExtRate,
-								&ExtRateLen,
-								&CkipFlag,
-								&AironetCellPowerLimit,
-								&EdcaParm,
-								&QbssLoad,
-								&QosCapability,
-								&RalinkIe,
-								&HtCapabilityLen,
-								&PreNHtCapabilityLen,
-								&HtCapability,
-								&AddHtInfoLen,
-								&AddHtInfo,
-								&NewExtChannelOffset,
-								&LenVIE,
-								pVIE))
-	{
-		ULONG Idx;
-		CHAR Rssi = 0;
-
-		Idx = BssTableSearch(&pAd->ScanTab, Bssid, Channel);
-		if (Idx != BSS_NOT_FOUND)
-			Rssi = pAd->ScanTab.BssEntry[Idx].Rssi;
-
-		Rssi = RTMPMaxRssi(pAd, ConvertToRssi(pAd, Elem->Rssi0, RSSI_0), ConvertToRssi(pAd, Elem->Rssi1, RSSI_1), ConvertToRssi(pAd, Elem->Rssi2, RSSI_2));
-
-
-#ifdef DOT11_N_SUPPORT
-		if ((HtCapabilityLen > 0) || (PreNHtCapabilityLen > 0))
-			HtCapabilityLen = SIZE_HT_CAP_IE;
-#endif // DOT11_N_SUPPORT //
-		if ((pAd->StaCfg.CCXReqType != MSRN_TYPE_UNUSED) && (Channel == pAd->StaCfg.CCXScanChannel))
-		{
-			Idx = BssTableSetEntry(pAd, &pAd->StaCfg.CCXBssTab, Bssid, Ssid, SsidLen, BssType, BeaconPeriod,
-						 &CfParm, AtimWin, CapabilityInfo, SupRate, SupRateLen,ExtRate, ExtRateLen, &HtCapability,
-						 &AddHtInfo, HtCapabilityLen, AddHtInfoLen, NewExtChannelOffset, Channel, Rssi, TimeStamp, CkipFlag,
-						 &EdcaParm, &QosCapability, &QbssLoad, LenVIE, pVIE);
-			if (Idx != BSS_NOT_FOUND)
-			{
-				NdisMoveMemory(pAd->StaCfg.CCXBssTab.BssEntry[Idx].PTSF, &Elem->Msg[24], 4);
-				NdisMoveMemory(&pAd->StaCfg.CCXBssTab.BssEntry[Idx].TTSF[0], &Elem->TimeStamp.u.LowPart, 4);
-				NdisMoveMemory(&pAd->StaCfg.CCXBssTab.BssEntry[Idx].TTSF[4], &Elem->TimeStamp.u.LowPart, 4);
-				if (pAd->StaCfg.CCXReqType == MSRN_TYPE_BEACON_REQ)
-					AironetAddBeaconReport(pAd, Idx, Elem);
-			}
-		}
-		else
-		{
-			Idx = BssTableSetEntry(pAd, &pAd->ScanTab, Bssid, Ssid, SsidLen, BssType, BeaconPeriod,
-						  &CfParm, AtimWin, CapabilityInfo, SupRate, SupRateLen, ExtRate, ExtRateLen,  &HtCapability,
-						 &AddHtInfo, HtCapabilityLen, AddHtInfoLen, NewExtChannelOffset, Channel, Rssi, TimeStamp, CkipFlag,
-						 &EdcaParm, &QosCapability, &QbssLoad, LenVIE, pVIE);
-#ifdef DOT11_N_SUPPORT
-#ifdef DOT11N_DRAFT3
-			if (pAd->ChannelList[pAd->CommonCfg.ChannelListIdx].bEffectedChannel == TRUE)
-			{
-				UCHAR		RegClass;
-				PeerBeaconAndProbeRspSanity2(pAd, Elem->Msg, Elem->MsgLen, &RegClass);
-				TriEventTableSetEntry(pAd, &pAd->CommonCfg.TriggerEventTab, Bssid, &HtCapability, HtCapabilityLen, RegClass, Channel);
-			}
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
-			if (Idx != BSS_NOT_FOUND)
-			{
-				NdisMoveMemory(pAd->ScanTab.BssEntry[Idx].PTSF, &Elem->Msg[24], 4);
-				NdisMoveMemory(&pAd->ScanTab.BssEntry[Idx].TTSF[0], &Elem->TimeStamp.u.LowPart, 4);
-				NdisMoveMemory(&pAd->ScanTab.BssEntry[Idx].TTSF[4], &Elem->TimeStamp.u.LowPart, 4);
-			}
-		}
-	}
-	// sanity check fail, ignored
-}
-
-/*
-	==========================================================================
-	Description:
-		When waiting joining the (I)BSS, beacon received from external
-	==========================================================================
- */
-VOID PeerBeaconAtJoinAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR         Bssid[MAC_ADDR_LEN], Addr2[MAC_ADDR_LEN];
-	UCHAR         Ssid[MAX_LEN_OF_SSID], SsidLen, BssType, Channel, MessageToMe,
-				  DtimCount, DtimPeriod, BcastFlag, NewChannel;
-	LARGE_INTEGER TimeStamp;
-	USHORT        BeaconPeriod, AtimWin, CapabilityInfo;
-	CF_PARM       Cf;
-	BOOLEAN       TimerCancelled;
-	UCHAR         Erp;
-	UCHAR         SupRate[MAX_LEN_OF_SUPPORTED_RATES], ExtRate[MAX_LEN_OF_SUPPORTED_RATES];
-	UCHAR		  SupRateLen, ExtRateLen;
-	UCHAR         CkipFlag;
-	USHORT 		  LenVIE;
-	UCHAR		  AironetCellPowerLimit;
-	EDCA_PARM       EdcaParm;
-	QBSS_LOAD_PARM  QbssLoad;
-	QOS_CAPABILITY_PARM QosCapability;
-	USHORT        Status;
-	UCHAR						VarIE[MAX_VIE_LEN];		// Total VIE length = MAX_VIE_LEN - -5
-	NDIS_802_11_VARIABLE_IEs	*pVIE = NULL;
-	ULONG           RalinkIe;
-	ULONG         Idx;
-	HT_CAPABILITY_IE		HtCapability;
-	ADD_HT_INFO_IE		AddHtInfo;	// AP might use this additional ht info IE
-	UCHAR				HtCapabilityLen = 0, PreNHtCapabilityLen = 0;
-	UCHAR			AddHtInfoLen;
-	UCHAR			NewExtChannelOffset = 0xff;
-#ifdef DOT11_N_SUPPORT
-	UCHAR			CentralChannel;
-#endif // DOT11_N_SUPPORT //
-
-	// Init Variable IE structure
-	pVIE = (PNDIS_802_11_VARIABLE_IEs) VarIE;
-	pVIE->Length = 0;
-    RTMPZeroMemory(&HtCapability, sizeof(HtCapability));
-	RTMPZeroMemory(&AddHtInfo, sizeof(ADD_HT_INFO_IE));
-
-
-	if (PeerBeaconAndProbeRspSanity(pAd,
-								Elem->Msg,
-								Elem->MsgLen,
-								Elem->Channel,
-								Addr2,
-								Bssid,
-								Ssid,
-								&SsidLen,
-								&BssType,
-								&BeaconPeriod,
-								&Channel,
-								&NewChannel,
-								&TimeStamp,
-								&Cf,
-								&AtimWin,
-								&CapabilityInfo,
-								&Erp,
-								&DtimCount,
-								&DtimPeriod,
-								&BcastFlag,
-								&MessageToMe,
-								SupRate,
-								&SupRateLen,
-								ExtRate,
-								&ExtRateLen,
-								&CkipFlag,
-								&AironetCellPowerLimit,
-								&EdcaParm,
-								&QbssLoad,
-								&QosCapability,
-								&RalinkIe,
-								&HtCapabilityLen,
-								&PreNHtCapabilityLen,
-								&HtCapability,
-								&AddHtInfoLen,
-								&AddHtInfo,
-								&NewExtChannelOffset,
-								&LenVIE,
-								pVIE))
-	{
-		// Disqualify 11b only adhoc when we are in 11g only adhoc mode
-		if ((BssType == BSS_ADHOC) && (pAd->CommonCfg.PhyMode == PHY_11G) && ((SupRateLen+ExtRateLen)< 12))
-			return;
-
-		// BEACON from desired BSS/IBSS found. We should be able to decide most
-		// BSS parameters here.
-		// Q. But what happen if this JOIN doesn't conclude a successful ASSOCIATEION?
-		//    Do we need to receover back all parameters belonging to previous BSS?
-		// A. Should be not. There's no back-door recover to previous AP. It still need
-		//    a new JOIN-AUTH-ASSOC sequence.
-		if (MAC_ADDR_EQUAL(pAd->MlmeAux.Bssid, Bssid))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("SYNC - receive desired BEACON at JoinWaitBeacon... Channel = %d\n", Channel));
-			RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer, &TimerCancelled);
-
-			// Update RSSI to prevent No signal display when cards first initialized
-			pAd->StaCfg.RssiSample.LastRssi0	= ConvertToRssi(pAd, Elem->Rssi0, RSSI_0);
-			pAd->StaCfg.RssiSample.LastRssi1	= ConvertToRssi(pAd, Elem->Rssi1, RSSI_1);
-			pAd->StaCfg.RssiSample.LastRssi2	= ConvertToRssi(pAd, Elem->Rssi2, RSSI_2);
-			pAd->StaCfg.RssiSample.AvgRssi0	= pAd->StaCfg.RssiSample.LastRssi0;
-			pAd->StaCfg.RssiSample.AvgRssi0X8	= pAd->StaCfg.RssiSample.AvgRssi0 << 3;
-			pAd->StaCfg.RssiSample.AvgRssi1	= pAd->StaCfg.RssiSample.LastRssi1;
-			pAd->StaCfg.RssiSample.AvgRssi1X8	= pAd->StaCfg.RssiSample.AvgRssi1 << 3;
-			pAd->StaCfg.RssiSample.AvgRssi2	= pAd->StaCfg.RssiSample.LastRssi2;
-			pAd->StaCfg.RssiSample.AvgRssi2X8	= pAd->StaCfg.RssiSample.AvgRssi2 << 3;
-
-			//
-			// We need to check if SSID only set to any, then we can record the current SSID.
-			// Otherwise will cause hidden SSID association failed.
-			//
-			if (pAd->MlmeAux.SsidLen == 0)
-			{
-				NdisMoveMemory(pAd->MlmeAux.Ssid, Ssid, SsidLen);
-				pAd->MlmeAux.SsidLen = SsidLen;
-			}
-			else
-			{
-				Idx = BssSsidTableSearch(&pAd->ScanTab, Bssid, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen, Channel);
-
-				if (Idx != BSS_NOT_FOUND)
-				{
-					//
-					// Multiple SSID case, used correct CapabilityInfo
-					//
-					CapabilityInfo = pAd->ScanTab.BssEntry[Idx].CapabilityInfo;
-				}
-			}
-			NdisMoveMemory(pAd->MlmeAux.Bssid, Bssid, MAC_ADDR_LEN);
-			pAd->MlmeAux.CapabilityInfo = CapabilityInfo & SUPPORTED_CAPABILITY_INFO;
-			pAd->MlmeAux.BssType = BssType;
-			pAd->MlmeAux.BeaconPeriod = BeaconPeriod;
-			pAd->MlmeAux.Channel = Channel;
-			pAd->MlmeAux.AtimWin = AtimWin;
-			pAd->MlmeAux.CfpPeriod = Cf.CfpPeriod;
-			pAd->MlmeAux.CfpMaxDuration = Cf.CfpMaxDuration;
-			pAd->MlmeAux.APRalinkIe = RalinkIe;
-
-			// Copy AP's supported rate to MlmeAux for creating assoication request
-			// Also filter out not supported rate
-			pAd->MlmeAux.SupRateLen = SupRateLen;
-			NdisMoveMemory(pAd->MlmeAux.SupRate, SupRate, SupRateLen);
-			RTMPCheckRates(pAd, pAd->MlmeAux.SupRate, &pAd->MlmeAux.SupRateLen);
-			pAd->MlmeAux.ExtRateLen = ExtRateLen;
-			NdisMoveMemory(pAd->MlmeAux.ExtRate, ExtRate, ExtRateLen);
-			RTMPCheckRates(pAd, pAd->MlmeAux.ExtRate, &pAd->MlmeAux.ExtRateLen);
-
-            NdisZeroMemory(pAd->StaActive.SupportedPhyInfo.MCSSet, 16);
-#ifdef DOT11_N_SUPPORT
-			pAd->MlmeAux.NewExtChannelOffset = NewExtChannelOffset;
-			pAd->MlmeAux.HtCapabilityLen = HtCapabilityLen;
-
-			// filter out un-supported ht rates
-			if (((HtCapabilityLen > 0) || (PreNHtCapabilityLen > 0)) && (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
-			{
-				RTMPZeroMemory(&pAd->MlmeAux.HtCapability, SIZE_HT_CAP_IE);
-   				RTMPMoveMemory(&pAd->MlmeAux.AddHtInfo, &AddHtInfo, SIZE_ADD_HT_INFO_IE);
-
-				// StaActive.SupportedHtPhy.MCSSet stores Peer AP's 11n Rx capability
-				NdisMoveMemory(pAd->StaActive.SupportedPhyInfo.MCSSet, HtCapability.MCSSet, 16);
-				pAd->MlmeAux.NewExtChannelOffset = NewExtChannelOffset;
-				pAd->MlmeAux.HtCapabilityLen = SIZE_HT_CAP_IE;
-				pAd->StaActive.SupportedPhyInfo.bHtEnable = TRUE;
-				if (PreNHtCapabilityLen > 0)
-					pAd->StaActive.SupportedPhyInfo.bPreNHt = TRUE;
-				RTMPCheckHt(pAd, BSSID_WCID, &HtCapability, &AddHtInfo);
-				// Copy AP Parameter to StaActive.  This is also in LinkUp.
-				DBGPRINT(RT_DEBUG_TRACE, ("PeerBeaconAtJoinAction! (MpduDensity=%d, MaxRAmpduFactor=%d, BW=%d)\n",
-					pAd->StaActive.SupportedHtPhy.MpduDensity, pAd->StaActive.SupportedHtPhy.MaxRAmpduFactor, HtCapability.HtCapInfo.ChannelWidth));
-
-				if (AddHtInfoLen > 0)
-				{
-					CentralChannel = AddHtInfo.ControlChan;
-		 			// Check again the Bandwidth capability of this AP.
-		 			if ((AddHtInfo.ControlChan > 2)&& (AddHtInfo.AddHtInfo.ExtChanOffset == EXTCHA_BELOW) && (HtCapability.HtCapInfo.ChannelWidth == BW_40))
-		 			{
-		 				CentralChannel = AddHtInfo.ControlChan - 2;
-		 			}
-		 			else if ((AddHtInfo.AddHtInfo.ExtChanOffset == EXTCHA_ABOVE) && (HtCapability.HtCapInfo.ChannelWidth == BW_40))
-		 			{
-		 				CentralChannel = AddHtInfo.ControlChan + 2;
-		 			}
-
-					// Check Error .
-					if (pAd->MlmeAux.CentralChannel != CentralChannel)
-		 				DBGPRINT(RT_DEBUG_ERROR, ("PeerBeaconAtJoinAction HT===>Beacon Central Channel = %d, Control Channel = %d. Mlmeaux CentralChannel = %d\n", CentralChannel, AddHtInfo.ControlChan, pAd->MlmeAux.CentralChannel));
-
-		 			DBGPRINT(RT_DEBUG_TRACE, ("PeerBeaconAtJoinAction HT===>Central Channel = %d, Control Channel = %d,  .\n", CentralChannel, AddHtInfo.ControlChan));
-
-				}
-
-			}
-			else
-#endif // DOT11_N_SUPPORT //
-			{
-   				// To prevent error, let legacy AP must have same CentralChannel and Channel.
-				if ((HtCapabilityLen == 0) && (PreNHtCapabilityLen == 0))
-					pAd->MlmeAux.CentralChannel = pAd->MlmeAux.Channel;
-
-				pAd->StaActive.SupportedPhyInfo.bHtEnable = FALSE;
-				RTMPZeroMemory(&pAd->MlmeAux.HtCapability, SIZE_HT_CAP_IE);
-				RTMPZeroMemory(&pAd->MlmeAux.AddHtInfo, SIZE_ADD_HT_INFO_IE);
-			}
-
-			RTMPUpdateMlmeRate(pAd);
-
-			// copy QOS related information
-			if ((pAd->CommonCfg.bWmmCapable)
-#ifdef DOT11_N_SUPPORT
-				 || (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
-#endif // DOT11_N_SUPPORT //
-				)
-			{
-				NdisMoveMemory(&pAd->MlmeAux.APEdcaParm, &EdcaParm, sizeof(EDCA_PARM));
-				NdisMoveMemory(&pAd->MlmeAux.APQbssLoad, &QbssLoad, sizeof(QBSS_LOAD_PARM));
-				NdisMoveMemory(&pAd->MlmeAux.APQosCapability, &QosCapability, sizeof(QOS_CAPABILITY_PARM));
-			}
-			else
-			{
-				NdisZeroMemory(&pAd->MlmeAux.APEdcaParm, sizeof(EDCA_PARM));
-				NdisZeroMemory(&pAd->MlmeAux.APQbssLoad, sizeof(QBSS_LOAD_PARM));
-				NdisZeroMemory(&pAd->MlmeAux.APQosCapability, sizeof(QOS_CAPABILITY_PARM));
-			}
-
-			DBGPRINT(RT_DEBUG_TRACE, ("SYNC - after JOIN, SupRateLen=%d, ExtRateLen=%d\n",
-										pAd->MlmeAux.SupRateLen, pAd->MlmeAux.ExtRateLen));
-
-#ifdef LEAP_SUPPORT
-			// Update CkipFlag
-			pAd->StaCfg.CkipFlag = CkipFlag;
-
-			// Keep TimeStamp for Re-Association used.
-			if (LEAP_CCKM_ON(pAd) && (pAd->StaCfg.CCKMLinkUpFlag == TRUE))
-				pAd->StaCfg.CCKMBeaconAtJoinTimeStamp = TimeStamp;
-#endif // LEAP_SUPPORT //
-
-			if (AironetCellPowerLimit != 0xFF)
-			{
-				//We need to change our TxPower for CCX 2.0 AP Control of Client Transmit Power
-				ChangeToCellPowerLimit(pAd, AironetCellPowerLimit);
-			}
-			else  //Used the default TX Power Percentage.
-				pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault;
-
-			pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
-			Status = MLME_SUCCESS;
-			MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_JOIN_CONF, 2, &Status);
-		}
-		// not to me BEACON, ignored
-	}
-	// sanity check fail, ignore this frame
-}
-
-/*
-	==========================================================================
-	Description:
-		receive BEACON from peer
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID PeerBeacon(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR         Bssid[MAC_ADDR_LEN], Addr2[MAC_ADDR_LEN];
-	CHAR          Ssid[MAX_LEN_OF_SSID];
-	CF_PARM       CfParm;
-	UCHAR         SsidLen, MessageToMe=0, BssType, Channel, NewChannel, index=0;
-	UCHAR         DtimCount=0, DtimPeriod=0, BcastFlag=0;
-	USHORT        CapabilityInfo, AtimWin, BeaconPeriod;
-	LARGE_INTEGER TimeStamp;
-	USHORT        TbttNumToNextWakeUp;
-	UCHAR         Erp;
-	UCHAR         SupRate[MAX_LEN_OF_SUPPORTED_RATES], ExtRate[MAX_LEN_OF_SUPPORTED_RATES];
-	UCHAR		  SupRateLen, ExtRateLen;
-	UCHAR		  CkipFlag;
-	USHORT        LenVIE;
-	UCHAR		  AironetCellPowerLimit;
-	EDCA_PARM       EdcaParm;
-	QBSS_LOAD_PARM  QbssLoad;
-	QOS_CAPABILITY_PARM QosCapability;
-	ULONG           RalinkIe;
-	// New for WPA security suites
-	UCHAR						VarIE[MAX_VIE_LEN];		// Total VIE length = MAX_VIE_LEN - -5
-	NDIS_802_11_VARIABLE_IEs	*pVIE = NULL;
-	HT_CAPABILITY_IE		HtCapability;
-	ADD_HT_INFO_IE		AddHtInfo;	// AP might use this additional ht info IE
-	UCHAR			HtCapabilityLen, PreNHtCapabilityLen;
-	UCHAR			AddHtInfoLen;
-	UCHAR			NewExtChannelOffset = 0xff;
-
-
-#ifdef RALINK_ATE
-    if (ATE_ON(pAd))
-    {
-		return;
-    }
-#endif // RALINK_ATE //
-
-	if (!(INFRA_ON(pAd) || ADHOC_ON(pAd)
-		))
-		return;
-
-	// Init Variable IE structure
-	pVIE = (PNDIS_802_11_VARIABLE_IEs) VarIE;
-	pVIE->Length = 0;
-    RTMPZeroMemory(&HtCapability, sizeof(HtCapability));
-	RTMPZeroMemory(&AddHtInfo, sizeof(ADD_HT_INFO_IE));
-
-	if (PeerBeaconAndProbeRspSanity(pAd,
-								Elem->Msg,
-								Elem->MsgLen,
-								Elem->Channel,
-								Addr2,
-								Bssid,
-								Ssid,
-								&SsidLen,
-								&BssType,
-								&BeaconPeriod,
-								&Channel,
-								&NewChannel,
-								&TimeStamp,
-								&CfParm,
-								&AtimWin,
-								&CapabilityInfo,
-								&Erp,
-								&DtimCount,
-								&DtimPeriod,
-								&BcastFlag,
-								&MessageToMe,
-								SupRate,
-								&SupRateLen,
-								ExtRate,
-								&ExtRateLen,
-								&CkipFlag,
-								&AironetCellPowerLimit,
-								&EdcaParm,
-								&QbssLoad,
-								&QosCapability,
-								&RalinkIe,
-								&HtCapabilityLen,
-								&PreNHtCapabilityLen,
-								&HtCapability,
-								&AddHtInfoLen,
-								&AddHtInfo,
-								&NewExtChannelOffset,
-								&LenVIE,
-								pVIE))
-	{
-		BOOLEAN is_my_bssid, is_my_ssid;
-		ULONG   Bssidx, Now;
-		BSS_ENTRY *pBss;
-		CHAR		RealRssi = RTMPMaxRssi(pAd, ConvertToRssi(pAd, Elem->Rssi0, RSSI_0), ConvertToRssi(pAd, Elem->Rssi1, RSSI_1), ConvertToRssi(pAd, Elem->Rssi2, RSSI_2));
-
-		is_my_bssid = MAC_ADDR_EQUAL(Bssid, pAd->CommonCfg.Bssid)? TRUE : FALSE;
-		is_my_ssid = SSID_EQUAL(Ssid, SsidLen, pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen)? TRUE:FALSE;
-
-
-		// ignore BEACON not for my SSID
-		if ((! is_my_ssid) && (! is_my_bssid))
-			return;
-
-		// It means STA waits disassoc completely from this AP, ignores this beacon.
-		if (pAd->Mlme.CntlMachine.CurrState == CNTL_WAIT_DISASSOC)
-			return;
-
-#ifdef DOT11_N_SUPPORT
-		// Copy Control channel for this BSSID.
-		if (AddHtInfoLen != 0)
-			Channel = AddHtInfo.ControlChan;
-
-		if ((HtCapabilityLen > 0) || (PreNHtCapabilityLen > 0))
-			HtCapabilityLen = SIZE_HT_CAP_IE;
-#endif // DOT11_N_SUPPORT //
-
-		//
-		// Housekeeping "SsidBssTab" table for later-on ROAMing usage.
-		//
-		Bssidx = BssTableSearch(&pAd->ScanTab, Bssid, Channel);
-		if (Bssidx == BSS_NOT_FOUND)
-		{
-			// discover new AP of this network, create BSS entry
-			Bssidx = BssTableSetEntry(pAd, &pAd->ScanTab, Bssid, Ssid, SsidLen, BssType, BeaconPeriod,
-						 &CfParm, AtimWin, CapabilityInfo, SupRate, SupRateLen, ExtRate, ExtRateLen,
-						&HtCapability, &AddHtInfo,HtCapabilityLen,AddHtInfoLen,NewExtChannelOffset, Channel,
-						RealRssi, TimeStamp, CkipFlag, &EdcaParm, &QosCapability,
-						&QbssLoad, LenVIE, pVIE);
-			if (Bssidx == BSS_NOT_FOUND) // return if BSS table full
-				return;
-
-			NdisMoveMemory(pAd->ScanTab.BssEntry[Bssidx].PTSF, &Elem->Msg[24], 4);
-			NdisMoveMemory(&pAd->ScanTab.BssEntry[Bssidx].TTSF[0], &Elem->TimeStamp.u.LowPart, 4);
-			NdisMoveMemory(&pAd->ScanTab.BssEntry[Bssidx].TTSF[4], &Elem->TimeStamp.u.LowPart, 4);
-
-
-
-		}
-
-		if ((pAd->CommonCfg.bIEEE80211H == 1) && (NewChannel != 0) && (Channel != NewChannel))
-		{
-			// Switching to channel 1 can prevent from rescanning the current channel immediately (by auto reconnection).
-			// In addition, clear the MLME queue and the scan table to discard the RX packets and previous scanning results.
-			AsicSwitchChannel(pAd, 1, FALSE);
-			AsicLockChannel(pAd, 1);
-		    LinkDown(pAd, FALSE);
-			MlmeQueueInit(&pAd->Mlme.Queue);
-			BssTableInit(&pAd->ScanTab);
-		    RTMPusecDelay(1000000);		// use delay to prevent STA do reassoc
-
-			// channel sanity check
-			for (index = 0 ; index < pAd->ChannelListNum; index++)
-			{
-				if (pAd->ChannelList[index].Channel == NewChannel)
-				{
-					pAd->ScanTab.BssEntry[Bssidx].Channel = NewChannel;
-					pAd->CommonCfg.Channel = NewChannel;
-					AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
-					AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-					DBGPRINT(RT_DEBUG_TRACE, ("PeerBeacon - STA receive channel switch announcement IE (New Channel =%d)\n", NewChannel));
-					break;
-				}
-			}
-
-			if (index >= pAd->ChannelListNum)
-			{
-				DBGPRINT_ERR(("PeerBeacon(can not find New Channel=%d in ChannelList[%d]\n", pAd->CommonCfg.Channel, pAd->ChannelListNum));
-			}
-		}
-
-		// if the ssid matched & bssid unmatched, we should select the bssid with large value.
-		// This might happened when two STA start at the same time
-		if ((! is_my_bssid) && ADHOC_ON(pAd))
-		{
-			INT	i;
-
-			// Add the safeguard against the mismatch of adhoc wep status
-			if (pAd->StaCfg.WepStatus != pAd->ScanTab.BssEntry[Bssidx].WepStatus)
-			{
-				return;
-			}
-
-			// collapse into the ADHOC network which has bigger BSSID value.
-			for (i = 0; i < 6; i++)
-			{
-				if (Bssid[i] > pAd->CommonCfg.Bssid[i])
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("SYNC - merge to the IBSS with bigger BSSID=%02x:%02x:%02x:%02x:%02x:%02x\n",
-						Bssid[0], Bssid[1], Bssid[2], Bssid[3], Bssid[4], Bssid[5]));
-					AsicDisableSync(pAd);
-					COPY_MAC_ADDR(pAd->CommonCfg.Bssid, Bssid);
-					AsicSetBssid(pAd, pAd->CommonCfg.Bssid);
-					MakeIbssBeacon(pAd);        // re-build BEACON frame
-					AsicEnableIbssSync(pAd);    // copy BEACON frame to on-chip memory
-					is_my_bssid = TRUE;
-					break;
-				}
-				else if (Bssid[i] < pAd->CommonCfg.Bssid[i])
-					break;
-			}
-		}
-
-
-		NdisGetSystemUpTime(&Now);
-		pBss = &pAd->ScanTab.BssEntry[Bssidx];
-		pBss->Rssi = RealRssi;       // lastest RSSI
-		pBss->LastBeaconRxTime = Now;   // last RX timestamp
-
-		//
-		// BEACON from my BSSID - either IBSS or INFRA network
-		//
-		if (is_my_bssid)
-		{
-			RXWI_STRUC	RxWI;
-
-			pAd->StaCfg.DtimCount = DtimCount;
-			pAd->StaCfg.DtimPeriod = DtimPeriod;
-			pAd->StaCfg.LastBeaconRxTime = Now;
-
-
-			RxWI.RSSI0 = Elem->Rssi0;
-			RxWI.RSSI1 = Elem->Rssi1;
-			RxWI.RSSI2 = Elem->Rssi2;
-
-			Update_Rssi_Sample(pAd, &pAd->StaCfg.RssiSample, &RxWI);
-			if (AironetCellPowerLimit != 0xFF)
-			{
-				//
-				// We get the Cisco (ccx) "TxPower Limit" required
-				// Changed to appropriate TxPower Limit for Ciso Compatible Extensions
-				//
-				ChangeToCellPowerLimit(pAd, AironetCellPowerLimit);
-			}
-			else
-			{
-				//
-				// AironetCellPowerLimit equal to 0xFF means the Cisco (ccx) "TxPower Limit" not exist.
-				// Used the default TX Power Percentage, that set from UI.
-				//
-				pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault;
-			}
-
-			if (ADHOC_ON(pAd) && (CAP_IS_IBSS_ON(CapabilityInfo)))
-			{
-				UCHAR			MaxSupportedRateIn500Kbps = 0;
-				UCHAR			idx;
-				MAC_TABLE_ENTRY *pEntry;
-
-				// supported rates array may not be sorted. sort it and find the maximum rate
-			    for (idx=0; idx<SupRateLen; idx++)
-			    {
-			        if (MaxSupportedRateIn500Kbps < (SupRate[idx] & 0x7f))
-			            MaxSupportedRateIn500Kbps = SupRate[idx] & 0x7f;
-			    }
-
-				for (idx=0; idx<ExtRateLen; idx++)
-			    {
-			        if (MaxSupportedRateIn500Kbps < (ExtRate[idx] & 0x7f))
-			            MaxSupportedRateIn500Kbps = ExtRate[idx] & 0x7f;
-			    }
-
-				// look up the existing table
-				pEntry = MacTableLookup(pAd, Addr2);
-
-				// Ad-hoc mode is using MAC address as BA session. So we need to continuously find newly joined adhoc station by receiving beacon.
-				// To prevent always check this, we use wcid == RESERVED_WCID to recognize it as newly joined adhoc station.
-				if ((ADHOC_ON(pAd) && (Elem->Wcid == RESERVED_WCID)) ||
-					(pEntry && ((pEntry->LastBeaconRxTime + ADHOC_ENTRY_BEACON_LOST_TIME) < Now)))
-				{
-					if (pEntry == NULL)
-						// Another adhoc joining, add to our MAC table.
-						pEntry = MacTableInsertEntry(pAd, Addr2, BSS0, FALSE);
-
-					if (StaAddMacTableEntry(pAd, pEntry, MaxSupportedRateIn500Kbps, &HtCapability, HtCapabilityLen, CapabilityInfo) == FALSE)
-					{
-						DBGPRINT(RT_DEBUG_TRACE, ("ADHOC - Add Entry failed.\n"));
-						return;
-					}
-
-					if (pEntry &&
-						(Elem->Wcid == RESERVED_WCID))
-					{
-						idx = pAd->StaCfg.DefaultKeyId;
-						RT28XX_STA_SECURITY_INFO_ADD(pAd, BSS0, idx, pEntry);
-					}
-				}
-
-				if (pEntry && pEntry->ValidAsCLI)
-					pEntry->LastBeaconRxTime = Now;
-
-				// At least another peer in this IBSS, declare MediaState as CONNECTED
-				if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
-				{
-					OPSTATUS_SET_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
-
-					pAd->IndicateMediaState = NdisMediaStateConnected;
-					RTMP_IndicateMediaState(pAd);
-	                pAd->ExtraInfo = GENERAL_LINK_UP;
-					AsicSetBssid(pAd, pAd->CommonCfg.Bssid);
-
-					// 2003/03/12 - john
-					// Make sure this entry in "ScanTab" table, thus complies to Microsoft's policy that
-					// "site survey" result should always include the current connected network.
-					//
-					Bssidx = BssTableSearch(&pAd->ScanTab, Bssid, Channel);
-					if (Bssidx == BSS_NOT_FOUND)
-					{
-						Bssidx = BssTableSetEntry(pAd, &pAd->ScanTab, Bssid, Ssid, SsidLen, BssType, BeaconPeriod,
-									&CfParm, AtimWin, CapabilityInfo, SupRate, SupRateLen, ExtRate, ExtRateLen, &HtCapability,
-									&AddHtInfo, HtCapabilityLen, AddHtInfoLen, NewExtChannelOffset, Channel, RealRssi, TimeStamp, 0,
-									&EdcaParm, &QosCapability, &QbssLoad, LenVIE, pVIE);
-					}
-					DBGPRINT(RT_DEBUG_TRACE, ("ADHOC  fOP_STATUS_MEDIA_STATE_CONNECTED.\n"));
-				}
-			}
-
-			if (INFRA_ON(pAd))
-			{
-				BOOLEAN bUseShortSlot, bUseBGProtection;
-
-				// decide to use/change to -
-				//      1. long slot (20 us) or short slot (9 us) time
-				//      2. turn on/off RTS/CTS and/or CTS-to-self protection
-				//      3. short preamble
-
-				//bUseShortSlot = pAd->CommonCfg.bUseShortSlotTime && CAP_IS_SHORT_SLOT(CapabilityInfo);
-				bUseShortSlot = CAP_IS_SHORT_SLOT(CapabilityInfo);
-				if (bUseShortSlot != OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_SHORT_SLOT_INUSED))
-					AsicSetSlotTime(pAd, bUseShortSlot);
-
-				bUseBGProtection = (pAd->CommonCfg.UseBGProtection == 1) ||    // always use
-								   ((pAd->CommonCfg.UseBGProtection == 0) && ERP_IS_USE_PROTECTION(Erp));
-
-				if (pAd->CommonCfg.Channel > 14) // always no BG protection in A-band. falsely happened when switching A/G band to a dual-band AP
-					bUseBGProtection = FALSE;
-
-				if (bUseBGProtection != OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_BG_PROTECTION_INUSED))
-				{
-					if (bUseBGProtection)
-					{
-						OPSTATUS_SET_FLAG(pAd, fOP_STATUS_BG_PROTECTION_INUSED);
-						AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode, (OFDMSETPROTECT|CCKSETPROTECT|ALLN_SETPROTECT),FALSE,(pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent == 1));
-					}
-					else
-					{
-						OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_BG_PROTECTION_INUSED);
-						AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode, (OFDMSETPROTECT|CCKSETPROTECT|ALLN_SETPROTECT),TRUE,(pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent == 1));
-					}
-
-					DBGPRINT(RT_DEBUG_WARN, ("SYNC - AP changed B/G protection to %d\n", bUseBGProtection));
-				}
-
-#ifdef DOT11_N_SUPPORT
-				// check Ht protection mode. and adhere to the Non-GF device indication by AP.
-				if ((AddHtInfoLen != 0) &&
-					((AddHtInfo.AddHtInfo2.OperaionMode != pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode) ||
-					(AddHtInfo.AddHtInfo2.NonGfPresent != pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent)))
-				{
-					pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent = AddHtInfo.AddHtInfo2.NonGfPresent;
-					pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode = AddHtInfo.AddHtInfo2.OperaionMode;
-					if (pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent == 1)
-				{
-						AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode, ALLN_SETPROTECT, FALSE, TRUE);
-					}
-					else
-						AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode, ALLN_SETPROTECT, FALSE, FALSE);
-
-					DBGPRINT(RT_DEBUG_TRACE, ("SYNC - AP changed N OperaionMode to %d\n", pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode));
-				}
-#endif // DOT11_N_SUPPORT //
-
-				if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED) &&
-					ERP_IS_USE_BARKER_PREAMBLE(Erp))
-				{
-					MlmeSetTxPreamble(pAd, Rt802_11PreambleLong);
-					DBGPRINT(RT_DEBUG_TRACE, ("SYNC - AP forced to use LONG preamble\n"));
-				}
-
-				if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED)    &&
-					(EdcaParm.bValid == TRUE)                          &&
-					(EdcaParm.EdcaUpdateCount != pAd->CommonCfg.APEdcaParm.EdcaUpdateCount))
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("SYNC - AP change EDCA parameters(from %d to %d)\n",
-						pAd->CommonCfg.APEdcaParm.EdcaUpdateCount,
-						EdcaParm.EdcaUpdateCount));
-					AsicSetEdcaParm(pAd, &EdcaParm);
-				}
-
-				// copy QOS related information
-				NdisMoveMemory(&pAd->CommonCfg.APQbssLoad, &QbssLoad, sizeof(QBSS_LOAD_PARM));
-				NdisMoveMemory(&pAd->CommonCfg.APQosCapability, &QosCapability, sizeof(QOS_CAPABILITY_PARM));
-			}
-
-			// only INFRASTRUCTURE mode support power-saving feature
-			if ((INFRA_ON(pAd) && (pAd->StaCfg.Psm == PWR_SAVE)) || (pAd->CommonCfg.bAPSDForcePowerSave))
-			{
-				UCHAR FreeNumber;
-				//  1. AP has backlogged unicast-to-me frame, stay AWAKE, send PSPOLL
-				//  2. AP has backlogged broadcast/multicast frame and we want those frames, stay AWAKE
-				//  3. we have outgoing frames in TxRing or MgmtRing, better stay AWAKE
-				//  4. Psm change to PWR_SAVE, but AP not been informed yet, we better stay AWAKE
-				//  5. otherwise, put PHY back to sleep to save battery.
-				if (MessageToMe)
-				{
-					if (pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable &&
-						pAd->CommonCfg.bAPSDAC_BE && pAd->CommonCfg.bAPSDAC_BK && pAd->CommonCfg.bAPSDAC_VI && pAd->CommonCfg.bAPSDAC_VO)
-					{
-						pAd->CommonCfg.bNeedSendTriggerFrame = TRUE;
-					}
-					else
-						RT28XX_PS_POLL_ENQUEUE(pAd);
-				}
-				else if (BcastFlag && (DtimCount == 0) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM))
-				{
-				}
-				else if ((pAd->TxSwQueue[QID_AC_BK].Number != 0)													||
-						(pAd->TxSwQueue[QID_AC_BE].Number != 0)														||
-						(pAd->TxSwQueue[QID_AC_VI].Number != 0)														||
-						(pAd->TxSwQueue[QID_AC_VO].Number != 0)														||
-						(RTMPFreeTXDRequest(pAd, QID_AC_BK, TX_RING_SIZE - 1, &FreeNumber) != NDIS_STATUS_SUCCESS)	||
-						(RTMPFreeTXDRequest(pAd, QID_AC_BE, TX_RING_SIZE - 1, &FreeNumber) != NDIS_STATUS_SUCCESS)	||
-						(RTMPFreeTXDRequest(pAd, QID_AC_VI, TX_RING_SIZE - 1, &FreeNumber) != NDIS_STATUS_SUCCESS)	||
-						(RTMPFreeTXDRequest(pAd, QID_AC_VO, TX_RING_SIZE - 1, &FreeNumber) != NDIS_STATUS_SUCCESS)	||
-						(RTMPFreeTXDRequest(pAd, QID_MGMT, MGMT_RING_SIZE - 1, &FreeNumber) != NDIS_STATUS_SUCCESS))
-				{
-					// TODO: consider scheduled HCCA. might not be proper to use traditional DTIM-based power-saving scheme
-					// can we cheat here (i.e. just check MGMT & AC_BE) for better performance?
-				}
-				else
-				{
-					USHORT NextDtim = DtimCount;
-
-					if (NextDtim == 0)
-						NextDtim = DtimPeriod;
-
-					TbttNumToNextWakeUp = pAd->StaCfg.DefaultListenCount;
-					if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM) && (TbttNumToNextWakeUp > NextDtim))
-						TbttNumToNextWakeUp = NextDtim;
-
-					if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
-					{
-						AsicSleepThenAutoWakeup(pAd, TbttNumToNextWakeUp);
-					}
-				}
-			}
-		}
-		// not my BSSID, ignore it
-	}
-	// sanity check fail, ignore this frame
-}
-
-/*
-	==========================================================================
-	Description:
-		Receive PROBE REQ from remote peer when operating in IBSS mode
-	==========================================================================
- */
-VOID PeerProbeReqAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR         Addr2[MAC_ADDR_LEN];
-	CHAR          Ssid[MAX_LEN_OF_SSID];
-	UCHAR         SsidLen;
-#ifdef DOT11_N_SUPPORT
-	UCHAR		  HtLen, AddHtLen, NewExtLen;
-#endif // DOT11_N_SUPPORT //
-	HEADER_802_11 ProbeRspHdr;
-	NDIS_STATUS   NStatus;
-	PUCHAR        pOutBuffer = NULL;
-	ULONG         FrameLen = 0;
-	LARGE_INTEGER FakeTimestamp;
-	UCHAR         DsLen = 1, IbssLen = 2;
-	UCHAR         LocalErpIe[3] = {IE_ERP, 1, 0};
-	BOOLEAN       Privacy;
-	USHORT        CapabilityInfo;
-	UCHAR		  RSNIe = IE_WPA;
-
-	if (! ADHOC_ON(pAd))
-		return;
-
-	if (PeerProbeReqSanity(pAd, Elem->Msg, Elem->MsgLen, Addr2, Ssid, &SsidLen))
-	{
-		if ((SsidLen == 0) || SSID_EQUAL(Ssid, SsidLen, pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen))
-		{
-			// allocate and send out ProbeRsp frame
-			NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-			if (NStatus != NDIS_STATUS_SUCCESS)
-				return;
-
-			//pAd->StaCfg.AtimWin = 0;  // ??????
-
-			Privacy = (pAd->StaCfg.WepStatus == Ndis802_11Encryption1Enabled) ||
-					  (pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled) ||
-					  (pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled);
-			CapabilityInfo = CAP_GENERATE(0, 1, Privacy, (pAd->CommonCfg.TxPreamble == Rt802_11PreambleShort), 0, 0);
-
-			MakeOutgoingFrame(pOutBuffer,                   &FrameLen,
-							  sizeof(HEADER_802_11),        &ProbeRspHdr,
-							  TIMESTAMP_LEN,                &FakeTimestamp,
-							  2,                            &pAd->CommonCfg.BeaconPeriod,
-							  2,                            &CapabilityInfo,
-							  1,                            &SsidIe,
-							  1,                            &pAd->CommonCfg.SsidLen,
-							  pAd->CommonCfg.SsidLen,       pAd->CommonCfg.Ssid,
-							  1,                            &SupRateIe,
-							  1,                            &pAd->StaActive.SupRateLen,
-							  pAd->StaActive.SupRateLen,    pAd->StaActive.SupRate,
-							  1,                            &DsIe,
-							  1,                            &DsLen,
-							  1,                            &pAd->CommonCfg.Channel,
-							  1,                            &IbssIe,
-							  1,                            &IbssLen,
-							  2,                            &pAd->StaActive.AtimWin,
-							  END_OF_ARGS);
-
-			if (pAd->StaActive.ExtRateLen)
-			{
-				ULONG tmp;
-				MakeOutgoingFrame(pOutBuffer + FrameLen,        &tmp,
-								  3,                            LocalErpIe,
-								  1,                            &ExtRateIe,
-								  1,                            &pAd->StaActive.ExtRateLen,
-								  pAd->StaActive.ExtRateLen,    &pAd->StaActive.ExtRate,
-								  END_OF_ARGS);
-				FrameLen += tmp;
-			}
-
-			// If adhoc secruity is set for WPA-None, append the cipher suite IE
-			if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
-			{
-				ULONG tmp;
-				MakeOutgoingFrame(pOutBuffer + FrameLen,        	&tmp,
-						  			1,                              &RSNIe,
-						  			1,                            	&pAd->StaCfg.RSNIE_Len,
-						  			pAd->StaCfg.RSNIE_Len,      	pAd->StaCfg.RSN_IE,
-						  			END_OF_ARGS);
-				FrameLen += tmp;
-			}
-#ifdef DOT11_N_SUPPORT
-			if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
-			{
-				ULONG TmpLen;
-				UCHAR	BROADCOM[4] = {0x0, 0x90, 0x4c, 0x33};
-				HtLen = sizeof(pAd->CommonCfg.HtCapability);
-				AddHtLen = sizeof(pAd->CommonCfg.AddHTInfo);
-				NewExtLen = 1;
-				//New extension channel offset IE is included in Beacon, Probe Rsp or channel Switch Announcement Frame
-				if (pAd->bBroadComHT == TRUE)
-				{
-					MakeOutgoingFrame(pOutBuffer + FrameLen,            &TmpLen,
-								  1,                                &WpaIe,
-								  4,                                &BROADCOM[0],
-								 pAd->MlmeAux.HtCapabilityLen,          &pAd->MlmeAux.HtCapability,
-								  END_OF_ARGS);
-				}
-				else
-				{
-				MakeOutgoingFrame(pOutBuffer + FrameLen,            &TmpLen,
-								  1,                                &HtCapIe,
-								  1,                                &HtLen,
-								 sizeof(HT_CAPABILITY_IE),          &pAd->CommonCfg.HtCapability,
-								  1,                                &AddHtInfoIe,
-								  1,                                &AddHtLen,
-								 sizeof(ADD_HT_INFO_IE),          &pAd->CommonCfg.AddHTInfo,
-								  1,                                &NewExtChanIe,
-								  1,                                &NewExtLen,
-								 sizeof(NEW_EXT_CHAN_IE),          &pAd->CommonCfg.NewExtChanOffset,
-								  END_OF_ARGS);
-				}
-				FrameLen += TmpLen;
-			}
-#endif // DOT11_N_SUPPORT //
-			MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-			MlmeFreeMemory(pAd, pOutBuffer);
-		}
-	}
-}
-
-VOID BeaconTimeoutAtJoinAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT Status;
-	DBGPRINT(RT_DEBUG_TRACE, ("SYNC - BeaconTimeoutAtJoinAction\n"));
-	pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
-	Status = MLME_REJ_TIMEOUT;
-	MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_JOIN_CONF, 2, &Status);
-}
-
-/*
-	==========================================================================
-	Description:
-		Scan timeout procedure. basically add channel index by 1 and rescan
-	==========================================================================
- */
-VOID ScanTimeoutAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	pAd->MlmeAux.Channel = NextChannel(pAd, pAd->MlmeAux.Channel);
-
-	// Only one channel scanned for CISCO beacon request
-	if ((pAd->MlmeAux.ScanType == SCAN_CISCO_ACTIVE) ||
-		(pAd->MlmeAux.ScanType == SCAN_CISCO_PASSIVE) ||
-		(pAd->MlmeAux.ScanType == SCAN_CISCO_NOISE) ||
-		(pAd->MlmeAux.ScanType == SCAN_CISCO_CHANNEL_LOAD))
-		pAd->MlmeAux.Channel = 0;
-
-	// this routine will stop if pAd->MlmeAux.Channel == 0
-	ScanNextChannel(pAd);
-}
-
-/*
-	==========================================================================
-	Description:
-	==========================================================================
- */
-VOID InvalidStateWhenScan(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT Status;
-	DBGPRINT(RT_DEBUG_TRACE, ("AYNC - InvalidStateWhenScan(state=%ld). Reset SYNC machine\n", pAd->Mlme.SyncMachine.CurrState));
-	pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
-	Status = MLME_STATE_MACHINE_REJECT;
-	MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_SCAN_CONF, 2, &Status);
-}
-
-/*
-	==========================================================================
-	Description:
-	==========================================================================
- */
-VOID InvalidStateWhenJoin(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT Status;
-	DBGPRINT(RT_DEBUG_TRACE, ("InvalidStateWhenJoin(state=%ld). Reset SYNC machine\n", pAd->Mlme.SyncMachine.CurrState));
-	pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
-	Status = MLME_STATE_MACHINE_REJECT;
-	MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_JOIN_CONF, 2, &Status);
-}
-
-/*
-	==========================================================================
-	Description:
-	==========================================================================
- */
-VOID InvalidStateWhenStart(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT Status;
-	DBGPRINT(RT_DEBUG_TRACE, ("InvalidStateWhenStart(state=%ld). Reset SYNC machine\n", pAd->Mlme.SyncMachine.CurrState));
-	pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
-	Status = MLME_STATE_MACHINE_REJECT;
-	MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_START_CONF, 2, &Status);
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID EnqueuePsPoll(
-	IN PRTMP_ADAPTER pAd)
-{
-#ifdef RALINK_ATE
-    if (ATE_ON(pAd))
-    {
-		return;
-    }
-#endif // RALINK_ATE //
-
-
-	if (pAd->StaCfg.WindowsPowerMode == Ndis802_11PowerModeLegacy_PSP)
-    	pAd->PsPollFrame.FC.PwrMgmt = PWR_SAVE;
-	MiniportMMRequest(pAd, 0, (PUCHAR)&pAd->PsPollFrame, sizeof(PSPOLL_FRAME));
-}
-
-
-/*
-	==========================================================================
-	Description:
-	==========================================================================
- */
-VOID EnqueueProbeRequest(
-	IN PRTMP_ADAPTER pAd)
-{
-	NDIS_STATUS     NState;
-	PUCHAR          pOutBuffer;
-	ULONG           FrameLen = 0;
-	HEADER_802_11   Hdr80211;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("force out a ProbeRequest ...\n"));
-
-	NState = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-	if (NState == NDIS_STATUS_SUCCESS)
-	{
-		MgtMacHeaderInit(pAd, &Hdr80211, SUBTYPE_PROBE_REQ, 0, BROADCAST_ADDR, BROADCAST_ADDR);
-
-		// this ProbeRequest explicitly specify SSID to reduce unwanted ProbeResponse
-		MakeOutgoingFrame(pOutBuffer,                     &FrameLen,
-						  sizeof(HEADER_802_11),          &Hdr80211,
-						  1,                              &SsidIe,
-						  1,                              &pAd->CommonCfg.SsidLen,
-						  pAd->CommonCfg.SsidLen,		  pAd->CommonCfg.Ssid,
-						  1,                              &SupRateIe,
-						  1,                              &pAd->StaActive.SupRateLen,
-						  pAd->StaActive.SupRateLen,      pAd->StaActive.SupRate,
-						  END_OF_ARGS);
-		MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-		MlmeFreeMemory(pAd, pOutBuffer);
-	}
-
-}
-
-#ifdef DOT11_N_SUPPORT
-#ifdef DOT11N_DRAFT3
-VOID BuildEffectedChannelList(
-	IN PRTMP_ADAPTER pAd)
-{
-	UCHAR		EChannel[11];
-	UCHAR		i, j, k;
-	UCHAR		UpperChannel = 0, LowerChannel = 0;
-
-	RTMPZeroMemory(EChannel, 11);
-	i = 0;
-	// Find upper channel and lower channel.
-	if (pAd->CommonCfg.CentralChannel < pAd->CommonCfg.Channel)
-	{
-		UpperChannel = pAd->CommonCfg.Channel;
-		LowerChannel = pAd->CommonCfg.CentralChannel;
-	}
-	else if (pAd->CommonCfg.CentralChannel > pAd->CommonCfg.Channel)
-	{
-		UpperChannel = pAd->CommonCfg.CentralChannel;
-		LowerChannel = pAd->CommonCfg.Channel;
-	}
-	else
-	{
-		return;
-	}
-
-	// Record channels that is below lower channel..
-	if (LowerChannel > 1)
-	{
-		EChannel[0] = LowerChannel - 1;
-		i = 1;
-		if (LowerChannel > 2)
-		{
-			EChannel[1] = LowerChannel - 2;
-			i = 2;
-			if (LowerChannel > 3)
-			{
-				EChannel[2] = LowerChannel - 3;
-				i = 3;
-			}
-		}
-	}
-	// Record channels that is between  lower channel and upper channel.
-	for (k = LowerChannel;k < UpperChannel;k++)
-	{
-		EChannel[i] = k;
-		i++;
-	}
-	// Record channels that is above upper channel..
-	if (LowerChannel < 11)
-	{
-		EChannel[i] = UpperChannel + 1;
-		i++;
-		if (LowerChannel < 10)
-		{
-			EChannel[i] = LowerChannel + 2;
-			i++;
-			if (LowerChannel < 9)
-			{
-				EChannel[i] = LowerChannel + 3;
-				i++;
-			}
-		}
-	}
-	//
-	for (j = 0;j < i;j++)
-	{
-		for (k = 0;k < pAd->ChannelListNum;k++)
-		{
-			if (pAd->ChannelList[k].Channel == EChannel[j])
-			{
-				pAd->ChannelList[k].bEffectedChannel = TRUE;
-				DBGPRINT(RT_DEBUG_TRACE,(" EffectedChannel( =%d)\n", EChannel[j]));
-				break;
-			}
-		}
-	}
-}
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
-
-BOOLEAN ScanRunning(
-		IN PRTMP_ADAPTER pAd)
-{
-	return (pAd->Mlme.SyncMachine.CurrState == SCAN_LISTEN) ? TRUE : FALSE;
-}
-
+#include "../../rt2860/sta/sync.c"
diff --git a/drivers/staging/rt2870/sta/wpa.c b/drivers/staging/rt2870/sta/wpa.c
index 8626dcde605..57a2eb2d089 100644
--- a/drivers/staging/rt2870/sta/wpa.c
+++ b/drivers/staging/rt2870/sta/wpa.c
@@ -1,2107 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	wpa.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Jan	Lee		03-07-22		Initial
-	Paul Lin	03-11-28		Modify for supplicant
-*/
-#include "../rt_config.h"
-
-#define		WPARSNIE	0xdd
-#define		WPA2RSNIE	0x30
-
-//extern UCHAR BIT8[];
-UCHAR	CipherWpaPskTkip[] = {
-		0xDD, 0x16,				// RSN IE
-		0x00, 0x50, 0xf2, 0x01,	// oui
-		0x01, 0x00,				// Version
-		0x00, 0x50, 0xf2, 0x02,	// Multicast
-		0x01, 0x00,				// Number of unicast
-		0x00, 0x50, 0xf2, 0x02,	// unicast
-		0x01, 0x00,				// number of authentication method
-		0x00, 0x50, 0xf2, 0x02	// authentication
-		};
-UCHAR	CipherWpaPskTkipLen = (sizeof(CipherWpaPskTkip) / sizeof(UCHAR));
-
-UCHAR	CipherWpaPskAes[] = {
-		0xDD, 0x16, 			// RSN IE
-		0x00, 0x50, 0xf2, 0x01,	// oui
-		0x01, 0x00,				// Version
-		0x00, 0x50, 0xf2, 0x04,	// Multicast
-		0x01, 0x00,				// Number of unicast
-		0x00, 0x50, 0xf2, 0x04,	// unicast
-		0x01, 0x00,				// number of authentication method
-		0x00, 0x50, 0xf2, 0x02	// authentication
-		};
-UCHAR	CipherWpaPskAesLen = (sizeof(CipherWpaPskAes) / sizeof(UCHAR));
-
-UCHAR	CipherSuiteCiscoCCKM[] = {
-		0xDD, 0x16,				// RSN IE
-		0x00, 0x50, 0xf2, 0x01, // oui
-		0x01, 0x00,				// Version
-		0x00, 0x40, 0x96, 0x01, // Multicast
-		0x01, 0x00,				// Number of uicast
-		0x00, 0x40, 0x96, 0x01, // unicast
-		0x01, 0x00,				// number of authentication method
-		0x00, 0x40, 0x96, 0x00  // Authentication
-		};
-UCHAR	CipherSuiteCiscoCCKMLen = (sizeof(CipherSuiteCiscoCCKM) / sizeof(UCHAR));
-
-UCHAR	CipherSuiteCiscoCCKM24[] = {
-		0xDD, 0x18,				// RSN IE
-		0x00, 0x50, 0xf2, 0x01, // oui
-		0x01, 0x00,				// Version
-		0x00, 0x40, 0x96, 0x01, // Multicast
-		0x01, 0x00,				// Number of uicast
-		0x00, 0x40, 0x96, 0x01, // unicast
-		0x01, 0x00,				// number of authentication method
-		0x00, 0x40, 0x96, 0x00,
-		0x28, 0x00// Authentication
-		};
-
-UCHAR	CipherSuiteCiscoCCKM24Len = (sizeof(CipherSuiteCiscoCCKM24) / sizeof(UCHAR));
-
-UCHAR	CipherSuiteCCXTkip[] = {
-		0xDD, 0x16,				// RSN IE
-		0x00, 0x50, 0xf2, 0x01,	// oui
-		0x01, 0x00,				// Version
-		0x00, 0x50, 0xf2, 0x02,	// Multicast
-		0x01, 0x00,				// Number of unicast
-		0x00, 0x50, 0xf2, 0x02,	// unicast
-		0x01, 0x00,				// number of authentication method
-		0x00, 0x50, 0xf2, 0x01	// authentication
-		};
-UCHAR	CipherSuiteCCXTkipLen = (sizeof(CipherSuiteCCXTkip) / sizeof(UCHAR));
-
-UCHAR	CCX_LLC_HDR[] = {0xAA, 0xAA, 0x03, 0x00, 0x40, 0x96, 0x00, 0x02};
-UCHAR	LLC_NORMAL[] = {0xAA, 0xAA, 0x03, 0x00, 0x00, 0x00};
-
-UCHAR	EAPOL_FRAME[] = {0x88, 0x8E};
-
-BOOLEAN CheckRSNIE(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pData,
-	IN  UCHAR           DataLen,
-	OUT	UCHAR			*Offset);
-
-void inc_byte_array(UCHAR *counter, int len);
-
-/*
-	========================================================================
-
-	Routine Description:
-		Classify WPA EAP message type
-
-	Arguments:
-		EAPType		Value of EAP message type
-		MsgType		Internal Message definition for MLME state machine
-
-	Return Value:
-		TRUE		Found appropriate message type
-		FALSE		No appropriate message type
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-		All these constants are defined in wpa.h
-		For supplicant, there is only EAPOL Key message avaliable
-
-	========================================================================
-*/
-BOOLEAN	WpaMsgTypeSubst(
-	IN	UCHAR	EAPType,
-	OUT	INT		*MsgType)
-{
-	switch (EAPType)
-	{
-		case EAPPacket:
-			*MsgType = MT2_EAPPacket;
-			break;
-		case EAPOLStart:
-			*MsgType = MT2_EAPOLStart;
-			break;
-		case EAPOLLogoff:
-			*MsgType = MT2_EAPOLLogoff;
-			break;
-		case EAPOLKey:
-			*MsgType = MT2_EAPOLKey;
-			break;
-		case EAPOLASFAlert:
-			*MsgType = MT2_EAPOLASFAlert;
-			break;
-		default:
-			return FALSE;
-	}
-	return TRUE;
-}
-
-/*
-	==========================================================================
-	Description:
-		association	state machine init,	including state	transition and timer init
-	Parameters:
-		S -	pointer	to the association state machine
-	==========================================================================
- */
-VOID WpaPskStateMachineInit(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	STATE_MACHINE *S,
-	OUT	STATE_MACHINE_FUNC Trans[])
-{
-	StateMachineInit(S,	Trans, MAX_WPA_PSK_STATE, MAX_WPA_PSK_MSG, (STATE_MACHINE_FUNC)Drop, WPA_PSK_IDLE, WPA_MACHINE_BASE);
-	StateMachineSetAction(S, WPA_PSK_IDLE, MT2_EAPOLKey, (STATE_MACHINE_FUNC)WpaEAPOLKeyAction);
-}
-
-/*
-	==========================================================================
-	Description:
-		This is	state machine function.
-		When receiving EAPOL packets which is  for 802.1x key management.
-		Use	both in	WPA, and WPAPSK	case.
-		In this	function, further dispatch to different	functions according	to the received	packet.	 3 categories are :
-		  1.  normal 4-way pairwisekey and 2-way groupkey handshake
-		  2.  MIC error	(Countermeasures attack)  report packet	from STA.
-		  3.  Request for pairwise/group key update	from STA
-	Return:
-	==========================================================================
-*/
-VOID WpaEAPOLKeyAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MLME_QUEUE_ELEM	*Elem)
-
-{
-	INT             MsgType = EAPOL_MSG_INVALID;
-	PKEY_DESCRIPTER pKeyDesc;
-	PHEADER_802_11  pHeader; //red
-	UCHAR           ZeroReplay[LEN_KEY_DESC_REPLAY];
-	UCHAR EapolVr;
-	KEY_INFO		peerKeyInfo;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("-----> WpaEAPOLKeyAction\n"));
-
-	// Get 802.11 header first
-	pHeader = (PHEADER_802_11) Elem->Msg;
-
-	// Get EAPoL-Key Descriptor
-	pKeyDesc = (PKEY_DESCRIPTER) &Elem->Msg[(LENGTH_802_11 + LENGTH_802_1_H + LENGTH_EAPOL_H)];
-
-	NdisZeroMemory((PUCHAR)&peerKeyInfo, sizeof(peerKeyInfo));
-	NdisMoveMemory((PUCHAR)&peerKeyInfo, (PUCHAR)&pKeyDesc->KeyInfo, sizeof(KEY_INFO));
-
-	*((USHORT *)&peerKeyInfo) = cpu2le16(*((USHORT *)&peerKeyInfo));
-
-
-	// 1. Check EAPOL frame version and type
-	EapolVr	= (UCHAR) Elem->Msg[LENGTH_802_11+LENGTH_802_1_H];
-
-    if (((EapolVr != EAPOL_VER) && (EapolVr != EAPOL_VER2)) || ((pKeyDesc->Type != WPA1_KEY_DESC) && (pKeyDesc->Type != WPA2_KEY_DESC)))
-	{
-        DBGPRINT(RT_DEBUG_ERROR, ("Key descripter does not match with WPA rule\n"));
-			return;
-	}
-
-	// First validate replay counter, only accept message with larger replay counter
-	// Let equal pass, some AP start with all zero replay counter
-	NdisZeroMemory(ZeroReplay, LEN_KEY_DESC_REPLAY);
-
-	if((RTMPCompareMemory(pKeyDesc->ReplayCounter, pAd->StaCfg.ReplayCounter, LEN_KEY_DESC_REPLAY) != 1) &&
-		(RTMPCompareMemory(pKeyDesc->ReplayCounter, ZeroReplay, LEN_KEY_DESC_REPLAY) != 0))
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("   ReplayCounter not match   \n"));
-		return;
-	}
-
-	// Process WPA2PSK frame
-	if(pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)
-	{
-		if((peerKeyInfo.KeyType == PAIRWISEKEY) &&
-			(peerKeyInfo.EKD_DL == 0) &&
-			(peerKeyInfo.KeyAck == 1) &&
-			(peerKeyInfo.KeyMic == 0) &&
-			(peerKeyInfo.Secure == 0) &&
-			(peerKeyInfo.Error == 0) &&
-			(peerKeyInfo.Request == 0))
-		{
-			MsgType = EAPOL_PAIR_MSG_1;
-			DBGPRINT(RT_DEBUG_TRACE, ("Receive EAPOL Key Pairwise Message 1\n"));
-		} else if((peerKeyInfo.KeyType == PAIRWISEKEY) &&
-			(peerKeyInfo.EKD_DL  == 1) &&
-			(peerKeyInfo.KeyAck == 1) &&
-			(peerKeyInfo.KeyMic == 1) &&
-			(peerKeyInfo.Secure == 1) &&
-			(peerKeyInfo.Error == 0) &&
-			(peerKeyInfo.Request == 0))
-		{
-			MsgType = EAPOL_PAIR_MSG_3;
-			DBGPRINT(RT_DEBUG_TRACE, ("Receive EAPOL Key Pairwise Message 3\n"));
-		} else if((peerKeyInfo.KeyType == GROUPKEY) &&
-			(peerKeyInfo.EKD_DL == 1) &&
-			(peerKeyInfo.KeyAck == 1) &&
-			(peerKeyInfo.KeyMic == 1) &&
-			(peerKeyInfo.Secure == 1) &&
-			(peerKeyInfo.Error == 0) &&
-			(peerKeyInfo.Request == 0))
-		{
-			MsgType = EAPOL_GROUP_MSG_1;
-			DBGPRINT(RT_DEBUG_TRACE, ("Receive EAPOL Key Group Message 1\n"));
-		}
-
-		// We will assume link is up (assoc suceess and port not secured).
-		// All state has to be able to process message from previous state
-		switch(pAd->StaCfg.WpaState)
-		{
-		case SS_START:
-			if(MsgType == EAPOL_PAIR_MSG_1)
-			{
-				Wpa2PairMsg1Action(pAd, Elem);
-				pAd->StaCfg.WpaState = SS_WAIT_MSG_3;
-			}
-			break;
-
-		case SS_WAIT_MSG_3:
-			if(MsgType == EAPOL_PAIR_MSG_1)
-			{
-				Wpa2PairMsg1Action(pAd, Elem);
-				pAd->StaCfg.WpaState = SS_WAIT_MSG_3;
-			}
-			else if(MsgType == EAPOL_PAIR_MSG_3)
-			{
-				Wpa2PairMsg3Action(pAd, Elem);
-				pAd->StaCfg.WpaState = SS_WAIT_GROUP;
-			}
-			break;
-
-		case SS_WAIT_GROUP:		// When doing group key exchange
-		case SS_FINISH:			// This happened when update group key
-			if(MsgType == EAPOL_PAIR_MSG_1)
-			{
-			    // Reset port secured variable
-				pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-				Wpa2PairMsg1Action(pAd, Elem);
-				pAd->StaCfg.WpaState = SS_WAIT_MSG_3;
-			}
-			else if(MsgType == EAPOL_PAIR_MSG_3)
-			{
-			    // Reset port secured variable
-				pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-				Wpa2PairMsg3Action(pAd, Elem);
-				pAd->StaCfg.WpaState = SS_WAIT_GROUP;
-			}
-			else if(MsgType == EAPOL_GROUP_MSG_1)
-			{
-				WpaGroupMsg1Action(pAd, Elem);
-				pAd->StaCfg.WpaState = SS_FINISH;
-			}
-			break;
-
-		default:
-			break;
-		}
-	}
-	// Process WPAPSK Frame
-	// Classify message Type, either pairwise message 1, 3, or group message 1 for supplicant
-	else if(pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK)
-	{
-		if((peerKeyInfo.KeyType == PAIRWISEKEY) &&
-			(peerKeyInfo.KeyIndex == 0) &&
-			(peerKeyInfo.KeyAck == 1) &&
-			(peerKeyInfo.KeyMic == 0) &&
-			(peerKeyInfo.Secure == 0) &&
-			(peerKeyInfo.Error == 0) &&
-			(peerKeyInfo.Request == 0))
-		{
-			MsgType = EAPOL_PAIR_MSG_1;
-			DBGPRINT(RT_DEBUG_TRACE, ("Receive EAPOL Key Pairwise Message 1\n"));
-		}
-		else if((peerKeyInfo.KeyType == PAIRWISEKEY) &&
-			(peerKeyInfo.KeyIndex == 0) &&
-			(peerKeyInfo.KeyAck == 1) &&
-			(peerKeyInfo.KeyMic == 1) &&
-			(peerKeyInfo.Secure == 0) &&
-			(peerKeyInfo.Error == 0) &&
-			(peerKeyInfo.Request == 0))
-		{
-			MsgType = EAPOL_PAIR_MSG_3;
-			DBGPRINT(RT_DEBUG_TRACE, ("Receive EAPOL Key Pairwise Message 3\n"));
-		}
-		else if((peerKeyInfo.KeyType == GROUPKEY) &&
-			(peerKeyInfo.KeyIndex != 0) &&
-			(peerKeyInfo.KeyAck == 1) &&
-			(peerKeyInfo.KeyMic == 1) &&
-			(peerKeyInfo.Secure == 1) &&
-			(peerKeyInfo.Error == 0) &&
-			(peerKeyInfo.Request == 0))
-		{
-			MsgType = EAPOL_GROUP_MSG_1;
-			DBGPRINT(RT_DEBUG_TRACE, ("Receive EAPOL Key Group Message 1\n"));
-		}
-
-		// We will assume link is up (assoc suceess and port not secured).
-		// All state has to be able to process message from previous state
-		switch(pAd->StaCfg.WpaState)
-		{
-		case SS_START:
-			if(MsgType == EAPOL_PAIR_MSG_1)
-			{
-				WpaPairMsg1Action(pAd, Elem);
-				pAd->StaCfg.WpaState = SS_WAIT_MSG_3;
-			}
-			break;
-
-		case SS_WAIT_MSG_3:
-			if(MsgType == EAPOL_PAIR_MSG_1)
-			{
-				WpaPairMsg1Action(pAd, Elem);
-				pAd->StaCfg.WpaState = SS_WAIT_MSG_3;
-			}
-			else if(MsgType == EAPOL_PAIR_MSG_3)
-			{
-				WpaPairMsg3Action(pAd, Elem);
-				pAd->StaCfg.WpaState = SS_WAIT_GROUP;
-			}
-			break;
-
-		case SS_WAIT_GROUP:		// When doing group key exchange
-		case SS_FINISH:			// This happened when update group key
-			if(MsgType == EAPOL_PAIR_MSG_1)
-			{
-				WpaPairMsg1Action(pAd, Elem);
-				pAd->StaCfg.WpaState = SS_WAIT_MSG_3;
-				// Reset port secured variable
-				pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-			}
-			else if(MsgType == EAPOL_PAIR_MSG_3)
-			{
-				WpaPairMsg3Action(pAd, Elem);
-				pAd->StaCfg.WpaState = SS_WAIT_GROUP;
-				// Reset port secured variable
-				pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-			}
-			else if(MsgType == EAPOL_GROUP_MSG_1)
-			{
-				WpaGroupMsg1Action(pAd, Elem);
-				pAd->StaCfg.WpaState = SS_FINISH;
-			}
-			break;
-
-		default:
-			break;
-		}
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<----- WpaEAPOLKeyAction\n"));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Process Pairwise key 4-way handshaking
-
-	Arguments:
-		pAd	Pointer	to our adapter
-		Elem		Message body
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	WpaPairMsg1Action(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem)
-{
-	PHEADER_802_11      pHeader;
-	UCHAR				*mpool, *PTK, *digest;
-	PUCHAR              pOutBuffer = NULL;
-	UCHAR               Header802_3[14];
-	ULONG               FrameLen = 0;
-	PEAPOL_PACKET       pMsg1;
-	EAPOL_PACKET        Packet;
-	UCHAR               Mic[16];
-
-	DBGPRINT(RT_DEBUG_TRACE, ("WpaPairMsg1Action ----->\n"));
-
-	// allocate memory pool
-	os_alloc_mem(pAd, (PUCHAR *)&mpool, 256);
-
-	if (mpool == NULL)
-		return;
-
-	// PTK Len = 80.
-	PTK = (UCHAR *) ROUND_UP(mpool, 4);
-	// digest Len = 80.
-	digest = (UCHAR *) ROUND_UP(PTK + 80, 4);
-
-	pHeader = (PHEADER_802_11) Elem->Msg;
-
-	// Process message 1 from authenticator
-	pMsg1 = (PEAPOL_PACKET) &Elem->Msg[LENGTH_802_11 + LENGTH_802_1_H];
-
-	// 1. Save Replay counter, it will use to verify message 3 and construct message 2
-	NdisMoveMemory(pAd->StaCfg.ReplayCounter, pMsg1->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-
-	// 2. Save ANonce
-	NdisMoveMemory(pAd->StaCfg.ANonce, pMsg1->KeyDesc.KeyNonce, LEN_KEY_DESC_NONCE);
-
-	// Generate random SNonce
-	GenRandom(pAd, pAd->CurrentAddress, pAd->StaCfg.SNonce);
-
-	// Calc PTK(ANonce, SNonce)
-	WpaCountPTK(pAd,
-		pAd->StaCfg.PMK,
-		pAd->StaCfg.ANonce,
-		pAd->CommonCfg.Bssid,
-		pAd->StaCfg.SNonce,
-		pAd->CurrentAddress,
-		PTK,
-		LEN_PTK);
-
-	// Save key to PTK entry
-	NdisMoveMemory(pAd->StaCfg.PTK, PTK, LEN_PTK);
-
-	// init 802.3 header and Fill Packet
-	MAKE_802_3_HEADER(Header802_3, pAd->CommonCfg.Bssid, pAd->CurrentAddress, EAPOL);
-
-	// Zero Message 2 body
-	NdisZeroMemory(&Packet, sizeof(Packet));
-	Packet.ProVer	= EAPOL_VER;
-	Packet.ProType	= EAPOLKey;
-	//
-	// Message 2 as  EAPOL-Key(0,1,0,0,0,P,0,SNonce,MIC,RSN IE)
-	//
-	Packet.KeyDesc.Type = WPA1_KEY_DESC;
-	// 1. Key descriptor version and appropriate RSN IE
-	if(pAd->StaCfg.WepStatus  == Ndis802_11Encryption3Enabled)
-	{
-		Packet.KeyDesc.KeyInfo.KeyDescVer = 2;
-	}
-	else	  // TKIP
-	{
-		Packet.KeyDesc.KeyInfo.KeyDescVer = 1;
-	}
-
-	// fill in Data Material and its length
-	Packet.KeyDesc.KeyData[0] = IE_WPA;
-	Packet.KeyDesc.KeyData[1] = pAd->StaCfg.RSNIE_Len;
-	Packet.KeyDesc.KeyDataLen[1] = pAd->StaCfg.RSNIE_Len + 2;
-	NdisMoveMemory(&Packet.KeyDesc.KeyData[2], pAd->StaCfg.RSN_IE, pAd->StaCfg.RSNIE_Len);
-
-	// Update packet length after decide Key data payload
-	Packet.Body_Len[1]  = sizeof(KEY_DESCRIPTER) - MAX_LEN_OF_RSNIE + Packet.KeyDesc.KeyDataLen[1];
-
-	// Update Key length
-	Packet.KeyDesc.KeyLength[0] = pMsg1->KeyDesc.KeyLength[0];
-	Packet.KeyDesc.KeyLength[1] = pMsg1->KeyDesc.KeyLength[1];
-	// 2. Key Type PeerKey
-	Packet.KeyDesc.KeyInfo.KeyType = PAIRWISEKEY;
-
-	// 3. KeyMic field presented
-	Packet.KeyDesc.KeyInfo.KeyMic  = 1;
-
-	//Convert to little-endian format.
-	*((USHORT *)&Packet.KeyDesc.KeyInfo) = cpu2le16(*((USHORT *)&Packet.KeyDesc.KeyInfo));
-
-
-	// 4. Fill SNonce
-	NdisMoveMemory(Packet.KeyDesc.KeyNonce, pAd->StaCfg.SNonce, LEN_KEY_DESC_NONCE);
-
-	// 5. Key Replay Count
-	NdisMoveMemory(Packet.KeyDesc.ReplayCounter, pAd->StaCfg.ReplayCounter, LEN_KEY_DESC_REPLAY);
-
-	// Send EAPOL(0, 1, 0, 0, 0, P, 0, SNonce, MIC, RSN_IE)
-	// Out buffer for transmitting message 2
-	MlmeAllocateMemory(pAd, (PUCHAR *)&pOutBuffer);  // allocate memory
-	if(pOutBuffer == NULL)
-	{
-		os_free_mem(pAd, mpool);
-		return;
-	}
-	// Prepare EAPOL frame for MIC calculation
-	// Be careful, only EAPOL frame is counted for MIC calculation
-	MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-		Packet.Body_Len[1] + 4,    &Packet,
-		END_OF_ARGS);
-
-	// 6. Prepare and Fill MIC value
-	NdisZeroMemory(Mic, sizeof(Mic));
-	if(pAd->StaCfg.WepStatus  == Ndis802_11Encryption3Enabled)
-	{	// AES
-
-		HMAC_SHA1(pOutBuffer, FrameLen, PTK, LEN_EAP_MICK, digest);
-		NdisMoveMemory(Mic, digest, LEN_KEY_DESC_MIC);
-	}
-	else
-	{	// TKIP
-		hmac_md5(PTK,  LEN_EAP_MICK, pOutBuffer, FrameLen, Mic);
-	}
-	NdisMoveMemory(Packet.KeyDesc.KeyMic, Mic, LEN_KEY_DESC_MIC);
-
-	//hex_dump("MIC", Mic, LEN_KEY_DESC_MIC);
-
-		MakeOutgoingFrame(pOutBuffer,           	&FrameLen,
-			  			LENGTH_802_3,     			&Header802_3,
-						Packet.Body_Len[1] + 4,    &Packet,
-						END_OF_ARGS);
-
-
-	// 5. Copy frame to Tx ring and send Msg 2 to authenticator
-	RTMPToWirelessSta(pAd, Header802_3, LENGTH_802_3, (PUCHAR)&Packet, Packet.Body_Len[1] + 4, TRUE);
-
-	MlmeFreeMemory(pAd, (PUCHAR)pOutBuffer);
-	os_free_mem(pAd, (PUCHAR)mpool);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("WpaPairMsg1Action <-----\n"));
-}
-
-VOID Wpa2PairMsg1Action(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem)
-{
-	PHEADER_802_11      pHeader;
-	UCHAR				*mpool, *PTK, *digest;
-	PUCHAR              pOutBuffer = NULL;
-	UCHAR               Header802_3[14];
-	ULONG               FrameLen = 0;
-	PEAPOL_PACKET       pMsg1;
-	EAPOL_PACKET        Packet;
-	UCHAR               Mic[16];
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Wpa2PairMsg1Action ----->\n"));
-
-	// allocate memory pool
-	os_alloc_mem(pAd, (PUCHAR *)&mpool, 256);
-
-	if (mpool == NULL)
-		return;
-
-	// PTK Len = 80.
-	PTK = (UCHAR *) ROUND_UP(mpool, 4);
-	// digest Len = 80.
-	digest = (UCHAR *) ROUND_UP(PTK + 80, 4);
-
-	pHeader = (PHEADER_802_11) Elem->Msg;
-
-	// Process message 1 from authenticator
-		pMsg1 = (PEAPOL_PACKET)	&Elem->Msg[LENGTH_802_11 + LENGTH_802_1_H];
-
-	// 1. Save Replay counter, it will use to verify message 3 and construct message 2
-	NdisMoveMemory(pAd->StaCfg.ReplayCounter, pMsg1->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-
-	// 2. Save ANonce
-	NdisMoveMemory(pAd->StaCfg.ANonce, pMsg1->KeyDesc.KeyNonce, LEN_KEY_DESC_NONCE);
-
-	// Generate random SNonce
-	GenRandom(pAd, pAd->CurrentAddress, pAd->StaCfg.SNonce);
-
-	if(pMsg1->KeyDesc.KeyDataLen[1] > 0 )
-	{
-		// cached PMKID
-	}
-
-	// Calc PTK(ANonce, SNonce)
-	WpaCountPTK(pAd,
-		pAd->StaCfg.PMK,
-		pAd->StaCfg.ANonce,
-		pAd->CommonCfg.Bssid,
-		pAd->StaCfg.SNonce,
-		pAd->CurrentAddress,
-		PTK,
-		LEN_PTK);
-
-	// Save key to PTK entry
-	NdisMoveMemory(pAd->StaCfg.PTK, PTK, LEN_PTK);
-
-	// init 802.3 header and Fill Packet
-	MAKE_802_3_HEADER(Header802_3, pAd->CommonCfg.Bssid, pAd->CurrentAddress, EAPOL);
-
-	// Zero message 2 body
-	NdisZeroMemory(&Packet, sizeof(Packet));
-	Packet.ProVer	= EAPOL_VER;
-	Packet.ProType	= EAPOLKey;
-	//
-	// Message 2 as  EAPOL-Key(0,1,0,0,0,P,0,SNonce,MIC,RSN IE)
-	//
-	Packet.KeyDesc.Type = WPA2_KEY_DESC;
-
-	// 1. Key descriptor version and appropriate RSN IE
-	if(pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled)
-	{
-		Packet.KeyDesc.KeyInfo.KeyDescVer = 2;
-	}
-	else	  // TKIP
-	{
-		Packet.KeyDesc.KeyInfo.KeyDescVer = 1;
-	}
-
-	// fill in Data Material and its length
-	Packet.KeyDesc.KeyData[0] = IE_WPA2;
-	Packet.KeyDesc.KeyData[1] = pAd->StaCfg.RSNIE_Len;
-	Packet.KeyDesc.KeyDataLen[1] = pAd->StaCfg.RSNIE_Len + 2;
-	NdisMoveMemory(&Packet.KeyDesc.KeyData[2], pAd->StaCfg.RSN_IE, pAd->StaCfg.RSNIE_Len);
-
-	// Update packet length after decide Key data payload
-	Packet.Body_Len[1]  = sizeof(KEY_DESCRIPTER) - MAX_LEN_OF_RSNIE + Packet.KeyDesc.KeyDataLen[1];
-
-	// 2. Key Type PeerKey
-	Packet.KeyDesc.KeyInfo.KeyType = PAIRWISEKEY;
-
-	// 3. KeyMic field presented
-	Packet.KeyDesc.KeyInfo.KeyMic  = 1;
-
-	// Update Key Length
-	Packet.KeyDesc.KeyLength[0] = 0;
-	Packet.KeyDesc.KeyLength[1] = pMsg1->KeyDesc.KeyLength[1];
-
-	// 4. Fill SNonce
-	NdisMoveMemory(Packet.KeyDesc.KeyNonce, pAd->StaCfg.SNonce, LEN_KEY_DESC_NONCE);
-
-	// 5. Key Replay Count
-	NdisMoveMemory(Packet.KeyDesc.ReplayCounter, pAd->StaCfg.ReplayCounter, LEN_KEY_DESC_REPLAY);
-
-	// Convert to little-endian format.
-	*((USHORT *)&Packet.KeyDesc.KeyInfo) = cpu2le16(*((USHORT *)&Packet.KeyDesc.KeyInfo));
-
-	// Send EAPOL-Key(0,1,0,0,0,P,0,SNonce,MIC,RSN IE)
-	// Out buffer for transmitting message 2
-	MlmeAllocateMemory(pAd,  (PUCHAR *)&pOutBuffer);  // allocate memory
-	if(pOutBuffer == NULL)
-	{
-		os_free_mem(pAd, mpool);
-		return;
-	}
-
-	// Prepare EAPOL frame for MIC calculation
-	// Be careful, only EAPOL frame is counted for MIC calculation
-	MakeOutgoingFrame(pOutBuffer,        &FrameLen,
-		Packet.Body_Len[1] + 4, &Packet,
-		END_OF_ARGS);
-
-	// 6. Prepare and Fill MIC value
-	NdisZeroMemory(Mic, sizeof(Mic));
-	if(pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled)
-	{
-		// AES
-		HMAC_SHA1(pOutBuffer, FrameLen, PTK, LEN_EAP_MICK, digest);
-		NdisMoveMemory(Mic, digest, LEN_KEY_DESC_MIC);
-	}
-	else
-	{
-		hmac_md5(PTK,  LEN_EAP_MICK, pOutBuffer, FrameLen, Mic);
-	}
-	NdisMoveMemory(Packet.KeyDesc.KeyMic, Mic, LEN_KEY_DESC_MIC);
-
-
-	// Make  Transmitting frame
-	MakeOutgoingFrame(pOutBuffer,           	&FrameLen,
-			  			LENGTH_802_3,     		&Header802_3,
-						Packet.Body_Len[1] + 4, &Packet,
-						END_OF_ARGS);
-
-
-	// 5. Copy frame to Tx ring
-	RTMPToWirelessSta(pAd, Header802_3, LENGTH_802_3, (PUCHAR)&Packet, Packet.Body_Len[1] + 4, TRUE);
-
-	MlmeFreeMemory(pAd, pOutBuffer);
-	os_free_mem(pAd, mpool);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Wpa2PairMsg1Action <-----\n"));
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Process Pairwise key 4-way handshaking
-
-	Arguments:
-		pAd	Pointer	to our adapter
-		Elem		Message body
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	WpaPairMsg3Action(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MLME_QUEUE_ELEM	*Elem)
-
-{
-	PHEADER_802_11      pHeader;
-	PUCHAR          	pOutBuffer = NULL;
-	UCHAR               Header802_3[14];
-	ULONG           	FrameLen = 0;
-	EAPOL_PACKET        Packet;
-	PEAPOL_PACKET       pMsg3;
-	UCHAR           	Mic[16], OldMic[16];
-	MAC_TABLE_ENTRY 	*pEntry = NULL;
-	UCHAR				skip_offset;
-	KEY_INFO			peerKeyInfo;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("WpaPairMsg3Action ----->\n"));
-
-	// Record 802.11 header & the received EAPOL packet Msg3
-	pHeader = (PHEADER_802_11) Elem->Msg;
-	pMsg3 = (PEAPOL_PACKET)	&Elem->Msg[LENGTH_802_11 + LENGTH_802_1_H];
-
-	NdisZeroMemory((PUCHAR)&peerKeyInfo, sizeof(peerKeyInfo));
-	NdisMoveMemory((PUCHAR)&peerKeyInfo, (PUCHAR)&pMsg3->KeyDesc.KeyInfo, sizeof(KEY_INFO));
-
-	*((USHORT*)&peerKeyInfo) = cpu2le16(*((USHORT*)&peerKeyInfo));
-
-
-	// 1. Verify cipher type match
-	if (pAd->StaCfg.WepStatus  == Ndis802_11Encryption3Enabled && (peerKeyInfo.KeyDescVer != 2))
-	{
-		return;
-	}
-	else if(pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled && (peerKeyInfo.KeyDescVer != 1))
-	{
-		return;
-	}
-
-	// Verify RSN IE
-	//if (!RTMPEqualMemory(pMsg3->KeyDesc.KeyData, pAd->MacTab.Content[BSSID_WCID].RSN_IE, pAd->MacTab.Content[BSSID_WCID].RSNIE_Len))
-	if (!CheckRSNIE(pAd, pMsg3->KeyDesc.KeyData, pMsg3->KeyDesc.KeyDataLen[1], &skip_offset))
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("RSN_IE Different in Msg 3 of WPA1 4-way handshake!! \n"));
-		hex_dump("The original RSN_IE", pAd->MacTab.Content[BSSID_WCID].RSN_IE, pAd->MacTab.Content[BSSID_WCID].RSNIE_Len);
-		hex_dump("The received RSN_IE", pMsg3->KeyDesc.KeyData, pMsg3->KeyDesc.KeyDataLen[1]);
-		return;
-	}
-	else
-		DBGPRINT(RT_DEBUG_TRACE, ("RSN_IE VALID in Msg 3 of WPA1 4-way handshake!! \n"));
-
-
-	// 2. Check MIC value
-	// Save the MIC and replace with zero
-	NdisMoveMemory(OldMic, pMsg3->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
-	NdisZeroMemory(pMsg3->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
-	if(pAd->StaCfg.WepStatus  == Ndis802_11Encryption3Enabled)
-	{
-		// AES
-		UCHAR digest[80];
-
-		HMAC_SHA1((PUCHAR) pMsg3, pMsg3->Body_Len[1] + 4, pAd->StaCfg.PTK, LEN_EAP_MICK, digest);
-		NdisMoveMemory(Mic, digest, LEN_KEY_DESC_MIC);
-	}
-	else	// TKIP
-	{
-		hmac_md5(pAd->StaCfg.PTK, LEN_EAP_MICK, (PUCHAR) pMsg3, pMsg3->Body_Len[1] + 4, Mic);
-	}
-
-	if(!NdisEqualMemory(OldMic, Mic, LEN_KEY_DESC_MIC))
-	{
-		DBGPRINT(RT_DEBUG_ERROR, (" MIC Different in msg 3 of 4-way handshake!!!!!!!!!! \n"));
-		return;
-	}
-	else
-		DBGPRINT(RT_DEBUG_TRACE, (" MIC VALID in msg 3 of 4-way handshake!!!!!!!!!! \n"));
-
-	// 3. Check Replay Counter, it has to be larger than last one. No need to be exact one larger
-	if(RTMPCompareMemory(pMsg3->KeyDesc.ReplayCounter, pAd->StaCfg.ReplayCounter, LEN_KEY_DESC_REPLAY) != 1)
-		return;
-
-	// Update new replay counter
-	NdisMoveMemory(pAd->StaCfg.ReplayCounter, pMsg3->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-
-	// 4. Double check ANonce
-	if(!NdisEqualMemory(pAd->StaCfg.ANonce, pMsg3->KeyDesc.KeyNonce, LEN_KEY_DESC_NONCE))
-		return;
-
-	// init 802.3 header and Fill Packet
-	MAKE_802_3_HEADER(Header802_3, pAd->CommonCfg.Bssid, pAd->CurrentAddress, EAPOL);
-
-	// Zero Message 4 body
-	NdisZeroMemory(&Packet, sizeof(Packet));
-	Packet.ProVer	= EAPOL_VER;
-	Packet.ProType	= EAPOLKey;
-	Packet.Body_Len[1]  = sizeof(KEY_DESCRIPTER) - MAX_LEN_OF_RSNIE;		// No data field
-
-	//
-	// Message 4 as  EAPOL-Key(0,1,0,0,0,P,0,0,MIC,0)
-	//
-	Packet.KeyDesc.Type = WPA1_KEY_DESC;
-
-	// Key descriptor version and appropriate RSN IE
-	Packet.KeyDesc.KeyInfo.KeyDescVer = peerKeyInfo.KeyDescVer;
-
-	// Update Key Length
-	Packet.KeyDesc.KeyLength[0] = pMsg3->KeyDesc.KeyLength[0];
-	Packet.KeyDesc.KeyLength[1] = pMsg3->KeyDesc.KeyLength[1];
-
-	// Key Type PeerKey
-	Packet.KeyDesc.KeyInfo.KeyType = PAIRWISEKEY;
-
-	// KeyMic field presented
-	Packet.KeyDesc.KeyInfo.KeyMic  = 1;
-
-	// In Msg3,  KeyInfo.secure =0 if Group Key HS to come. 1 if no group key HS
-	// Station sends Msg4  KeyInfo.secure should be the same as that in Msg.3
-	Packet.KeyDesc.KeyInfo.Secure= peerKeyInfo.Secure;
-
-	// Convert to little-endian format.
-	*((USHORT *)&Packet.KeyDesc.KeyInfo) = cpu2le16(*((USHORT *)&Packet.KeyDesc.KeyInfo));
-
-	// Key Replay count
-	NdisMoveMemory(Packet.KeyDesc.ReplayCounter, pMsg3->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-
-	// Out buffer for transmitting message 4
-	MlmeAllocateMemory(pAd, (PUCHAR *)&pOutBuffer);  // allocate memory
-	if(pOutBuffer == NULL)
-		return;
-
-	// Prepare EAPOL frame for MIC calculation
-	// Be careful, only EAPOL frame is counted for MIC calculation
-	MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-		Packet.Body_Len[1] + 4,    &Packet,
-		END_OF_ARGS);
-
-	// Prepare and Fill MIC value
-	NdisZeroMemory(Mic, sizeof(Mic));
-	if(pAd->StaCfg.WepStatus  == Ndis802_11Encryption3Enabled)
-	{
-		// AES
-		UCHAR digest[80];
-
-		HMAC_SHA1(pOutBuffer, FrameLen, pAd->StaCfg.PTK, LEN_EAP_MICK, digest);
-		NdisMoveMemory(Mic, digest, LEN_KEY_DESC_MIC);
-	}
-	else
-	{
-		hmac_md5(pAd->StaCfg.PTK, LEN_EAP_MICK, pOutBuffer, FrameLen, Mic);
-	}
-	NdisMoveMemory(Packet.KeyDesc.KeyMic, Mic, LEN_KEY_DESC_MIC);
-
-	// Update PTK
-	// Prepare pair-wise key information into shared key table
-	NdisZeroMemory(&pAd->SharedKey[BSS0][0], sizeof(CIPHER_KEY));
-	pAd->SharedKey[BSS0][0].KeyLen = LEN_TKIP_EK;
-    NdisMoveMemory(pAd->SharedKey[BSS0][0].Key, &pAd->StaCfg.PTK[32], LEN_TKIP_EK);
-	NdisMoveMemory(pAd->SharedKey[BSS0][0].RxMic, &pAd->StaCfg.PTK[48], LEN_TKIP_RXMICK);
-	NdisMoveMemory(pAd->SharedKey[BSS0][0].TxMic, &pAd->StaCfg.PTK[48+LEN_TKIP_RXMICK], LEN_TKIP_TXMICK);
-
-	// Decide its ChiperAlg
-	if (pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled)
-		pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_TKIP;
-	else if (pAd->StaCfg.PairCipher == Ndis802_11Encryption3Enabled)
-		pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_AES;
-	else
-		pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_NONE;
-
-	// Update these related information to MAC_TABLE_ENTRY
-	pEntry = &pAd->MacTab.Content[BSSID_WCID];
-	NdisMoveMemory(pEntry->PairwiseKey.Key, &pAd->StaCfg.PTK[32], LEN_TKIP_EK);
-	NdisMoveMemory(pEntry->PairwiseKey.RxMic, &pAd->StaCfg.PTK[48], LEN_TKIP_RXMICK);
-	NdisMoveMemory(pEntry->PairwiseKey.TxMic, &pAd->StaCfg.PTK[48+LEN_TKIP_RXMICK], LEN_TKIP_TXMICK);
-	pEntry->PairwiseKey.CipherAlg = pAd->SharedKey[BSS0][0].CipherAlg;
-
-	// Update pairwise key information to ASIC Shared Key Table
-	AsicAddSharedKeyEntry(pAd,
-						  BSS0,
-						  0,
-						  pAd->SharedKey[BSS0][0].CipherAlg,
-						  pAd->SharedKey[BSS0][0].Key,
-						  pAd->SharedKey[BSS0][0].TxMic,
-						  pAd->SharedKey[BSS0][0].RxMic);
-
-	// Update ASIC WCID attribute table and IVEIV table
-	RTMPAddWcidAttributeEntry(pAd,
-							  BSS0,
-							  0,
-							  pAd->SharedKey[BSS0][0].CipherAlg,
-							  pEntry);
-
-	// Make transmitting frame
-	MakeOutgoingFrame(pOutBuffer,           	&FrameLen,
-			  			LENGTH_802_3,     		&Header802_3,
-						Packet.Body_Len[1] + 4, &Packet,
-						END_OF_ARGS);
-
-
-	// Copy frame to Tx ring and Send Message 4 to authenticator
-	RTMPToWirelessSta(pAd, Header802_3, LENGTH_802_3, (PUCHAR)&Packet, Packet.Body_Len[1] + 4, TRUE);
-
-	MlmeFreeMemory(pAd, (PUCHAR)pOutBuffer);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("WpaPairMsg3Action <-----\n"));
-}
-
-VOID    Wpa2PairMsg3Action(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem)
-
-{
-	PHEADER_802_11      pHeader;
-	PUCHAR              pOutBuffer = NULL;
-	UCHAR               Header802_3[14];
-	ULONG               FrameLen = 0;
-	EAPOL_PACKET        Packet;
-	PEAPOL_PACKET       pMsg3;
-	UCHAR               Mic[16], OldMic[16];
-	UCHAR               *mpool, *KEYDATA, *digest;
-	UCHAR               Key[32];
-	MAC_TABLE_ENTRY 	*pEntry = NULL;
-	KEY_INFO			peerKeyInfo;
-
-	// allocate memory
-	os_alloc_mem(pAd, (PUCHAR *)&mpool, 1024);
-
-	if(mpool == NULL)
-		return;
-
-	// KEYDATA Len = 512.
-	KEYDATA = (UCHAR *) ROUND_UP(mpool, 4);
-	// digest Len = 80.
-	digest = (UCHAR *) ROUND_UP(KEYDATA + 512, 4);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Wpa2PairMsg3Action ----->\n"));
-
-	pHeader = (PHEADER_802_11) Elem->Msg;
-
-	// Process message 3 frame.
-	pMsg3 = (PEAPOL_PACKET)	&Elem->Msg[LENGTH_802_11 + LENGTH_802_1_H];
-
-	NdisZeroMemory((PUCHAR)&peerKeyInfo, sizeof(peerKeyInfo));
-	NdisMoveMemory((PUCHAR)&peerKeyInfo, (PUCHAR)&pMsg3->KeyDesc.KeyInfo, sizeof(KEY_INFO));
-
-	*((USHORT*)&peerKeyInfo) = cpu2le16(*((USHORT*)&peerKeyInfo));
-
-	// 1. Verify cipher type match
-	if (pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled && (peerKeyInfo.KeyDescVer!= 2))
-	{
-		os_free_mem(pAd, (PUCHAR)mpool);
-		return;
-	}
-	else if(pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled && (peerKeyInfo.KeyDescVer != 1))
-	{
-		os_free_mem(pAd, (PUCHAR)mpool);
-		return;
-	}
-
-	// 2. Check MIC value
-	// Save the MIC and replace with zero
-	NdisMoveMemory(OldMic, pMsg3->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
-	NdisZeroMemory(pMsg3->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
-	if (pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled)
-	{
-		// AES
-		HMAC_SHA1((PUCHAR) pMsg3, pMsg3->Body_Len[1] + 4, pAd->StaCfg.PTK, LEN_EAP_MICK, digest);
-		NdisMoveMemory(Mic, digest, LEN_KEY_DESC_MIC);
-	}
-	else
-	{
-		hmac_md5(pAd->StaCfg.PTK, LEN_EAP_MICK, (PUCHAR) pMsg3, pMsg3->Body_Len[1] + 4, Mic);
-	}
-
-	if(!NdisEqualMemory(OldMic, Mic, LEN_KEY_DESC_MIC))
-	{
-		DBGPRINT(RT_DEBUG_ERROR, (" MIC Different in msg 3 of 4-way handshake!!!!!!!!!! \n"));
-		os_free_mem(pAd, (PUCHAR)mpool);
-		return;
-	}
-	else
-		DBGPRINT(RT_DEBUG_TRACE, (" MIC VALID in msg 3 of 4-way handshake!!!!!!!!!! \n"));
-
-	// 3. Check Replay Counter, it has to be larger than last one. No need to be exact one larger
-	if(RTMPCompareMemory(pMsg3->KeyDesc.ReplayCounter, pAd->StaCfg.ReplayCounter, LEN_KEY_DESC_REPLAY) != 1)
-	{
-		os_free_mem(pAd, (PUCHAR)mpool);
-		return;
-	}
-
-	// Update new replay counter
-	NdisMoveMemory(pAd->StaCfg.ReplayCounter, pMsg3->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-
-	// 4. Double check ANonce
-	if(!NdisEqualMemory(pAd->StaCfg.ANonce, pMsg3->KeyDesc.KeyNonce, LEN_KEY_DESC_NONCE))
-	{
-		os_free_mem(pAd, (PUCHAR)mpool);
-		return;
-	}
-
-	// Obtain GTK
-	// 5. Decrypt GTK from Key Data
-	DBGPRINT_RAW(RT_DEBUG_TRACE, ("EKD = %d\n", peerKeyInfo.EKD_DL));
-	if(pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled)
-	{
-		// Decrypt AES GTK
-		AES_GTK_KEY_UNWRAP(&pAd->StaCfg.PTK[16], KEYDATA, pMsg3->KeyDesc.KeyDataLen[1],pMsg3->KeyDesc.KeyData);
-	}
-	else	  // TKIP
-	{
-		INT i;
-		// Decrypt TKIP GTK
-		// Construct 32 bytes RC4 Key
-		NdisMoveMemory(Key, pMsg3->KeyDesc.KeyIv, 16);
-		NdisMoveMemory(&Key[16], &pAd->StaCfg.PTK[16], 16);
-		ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, Key, 32);
-		//discard first 256 bytes
-		for(i = 0; i < 256; i++)
-			ARCFOUR_BYTE(&pAd->PrivateInfo.WEPCONTEXT);
-		// Decrypt GTK. Becareful, there is no ICV to check the result is correct or not
-		ARCFOUR_DECRYPT(&pAd->PrivateInfo.WEPCONTEXT, KEYDATA, pMsg3->KeyDesc.KeyData, pMsg3->KeyDesc.KeyDataLen[1]);
-	}
-
-	if (!ParseKeyData(pAd, KEYDATA, pMsg3->KeyDesc.KeyDataLen[1], 1))
-	{
-		os_free_mem(pAd, (PUCHAR)mpool);
-		return;
-	}
-
-	// Update GTK to ASIC
-	// Update group key information to ASIC Shared Key Table
-	AsicAddSharedKeyEntry(pAd,
-						  BSS0,
-						  pAd->StaCfg.DefaultKeyId,
-						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg,
-						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key,
-						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].TxMic,
-						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].RxMic);
-
-	// Update ASIC WCID attribute table and IVEIV table
-	RTMPAddWcidAttributeEntry(pAd,
-							  BSS0,
-							  pAd->StaCfg.DefaultKeyId,
-							  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg,
-							  NULL);
-
-	// init 802.3 header and Fill Packet
-	MAKE_802_3_HEADER(Header802_3, pAd->CommonCfg.Bssid, pAd->CurrentAddress, EAPOL);
-
-	// Zero message 4 body
-	NdisZeroMemory(&Packet, sizeof(Packet));
-	Packet.ProVer	= EAPOL_VER;
-	Packet.ProType	= EAPOLKey;
-	Packet.Body_Len[1]  	= sizeof(KEY_DESCRIPTER) - MAX_LEN_OF_RSNIE;		// No data field
-
-	//
-	// Message 4 as  EAPOL-Key(0,1,0,0,0,P,0,0,MIC,0)
-	//
-	Packet.KeyDesc.Type = WPA2_KEY_DESC;
-
-	// Key descriptor version and appropriate RSN IE
-	Packet.KeyDesc.KeyInfo.KeyDescVer = peerKeyInfo.KeyDescVer;
-
-	// Update Key Length
-	Packet.KeyDesc.KeyLength[0] = pMsg3->KeyDesc.KeyLength[0];
-	Packet.KeyDesc.KeyLength[1] = pMsg3->KeyDesc.KeyLength[1];
-
-	// Key Type PeerKey
-	Packet.KeyDesc.KeyInfo.KeyType = PAIRWISEKEY;
-
-	// KeyMic field presented
-	Packet.KeyDesc.KeyInfo.KeyMic  = 1;
-	Packet.KeyDesc.KeyInfo.Secure = 1;
-
-	// Convert to little-endian format.
-	*((USHORT *)&Packet.KeyDesc.KeyInfo) = cpu2le16(*((USHORT *)&Packet.KeyDesc.KeyInfo));
-
-	// Key Replay count
-	NdisMoveMemory(Packet.KeyDesc.ReplayCounter, pMsg3->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-
-	// Out buffer for transmitting message 4
-	MlmeAllocateMemory(pAd, (PUCHAR *)&pOutBuffer);  // allocate memory
-	if(pOutBuffer == NULL)
-	{
-		os_free_mem(pAd, (PUCHAR)mpool);
-		return;
-	}
-
-	// Prepare EAPOL frame for MIC calculation
-	// Be careful, only EAPOL frame is counted for MIC calculation
-	MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-		Packet.Body_Len[1] + 4,    &Packet,
-		END_OF_ARGS);
-
-	// Prepare and Fill MIC value
-	NdisZeroMemory(Mic, sizeof(Mic));
-	if(pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled)
-	{
-		// AES
-		HMAC_SHA1(pOutBuffer, FrameLen, pAd->StaCfg.PTK, LEN_EAP_MICK, digest);
-		NdisMoveMemory(Mic, digest, LEN_KEY_DESC_MIC);
-	}
-	else
-	{
-		hmac_md5(pAd->StaCfg.PTK, LEN_EAP_MICK, pOutBuffer, FrameLen, Mic);
-	}
-	NdisMoveMemory(Packet.KeyDesc.KeyMic, Mic, LEN_KEY_DESC_MIC);
-
-	// Update PTK
-	// Prepare pair-wise key information into shared key table
-	NdisZeroMemory(&pAd->SharedKey[BSS0][0], sizeof(CIPHER_KEY));
-	pAd->SharedKey[BSS0][0].KeyLen = LEN_TKIP_EK;
-    NdisMoveMemory(pAd->SharedKey[BSS0][0].Key, &pAd->StaCfg.PTK[32], LEN_TKIP_EK);
-	NdisMoveMemory(pAd->SharedKey[BSS0][0].RxMic, &pAd->StaCfg.PTK[48], LEN_TKIP_RXMICK);
-	NdisMoveMemory(pAd->SharedKey[BSS0][0].TxMic, &pAd->StaCfg.PTK[48+LEN_TKIP_RXMICK], LEN_TKIP_TXMICK);
-
-	// Decide its ChiperAlg
-	if (pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled)
-		pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_TKIP;
-	else if (pAd->StaCfg.PairCipher == Ndis802_11Encryption3Enabled)
-		pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_AES;
-	else
-		pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_NONE;
-
-	// Update these related information to MAC_TABLE_ENTRY
-	pEntry = &pAd->MacTab.Content[BSSID_WCID];
-	NdisMoveMemory(&pEntry->PairwiseKey.Key, &pAd->StaCfg.PTK[32], LEN_TKIP_EK);
-	NdisMoveMemory(&pEntry->PairwiseKey.RxMic, &pAd->StaCfg.PTK[48], LEN_TKIP_RXMICK);
-	NdisMoveMemory(&pEntry->PairwiseKey.TxMic, &pAd->StaCfg.PTK[48+LEN_TKIP_RXMICK], LEN_TKIP_TXMICK);
-	pEntry->PairwiseKey.CipherAlg = pAd->SharedKey[BSS0][0].CipherAlg;
-
-	// Update pairwise key information to ASIC Shared Key Table
-	AsicAddSharedKeyEntry(pAd,
-						  BSS0,
-						  0,
-						  pAd->SharedKey[BSS0][0].CipherAlg,
-						  pAd->SharedKey[BSS0][0].Key,
-						  pAd->SharedKey[BSS0][0].TxMic,
-						  pAd->SharedKey[BSS0][0].RxMic);
-
-	// Update ASIC WCID attribute table and IVEIV table
-	RTMPAddWcidAttributeEntry(pAd,
-							  BSS0,
-							  0,
-							  pAd->SharedKey[BSS0][0].CipherAlg,
-							  pEntry);
-
-	// Make  Transmitting frame
-	MakeOutgoingFrame(pOutBuffer,           	&FrameLen,
-			  			LENGTH_802_3,     		&Header802_3,
-						Packet.Body_Len[1] + 4, &Packet,
-						END_OF_ARGS);
-
-
-	// Copy frame to Tx ring and Send Message 4 to authenticator
-	RTMPToWirelessSta(pAd, Header802_3, LENGTH_802_3, (PUCHAR)&Packet, Packet.Body_Len[1] + 4, TRUE);
-
-	// set 802.1x port control
-	//pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-	STA_PORT_SECURED(pAd);
-
-    // Indicate Connected for GUI
-    pAd->IndicateMediaState = NdisMediaStateConnected;
-
-	MlmeFreeMemory(pAd, (PUCHAR)pOutBuffer);
-	os_free_mem(pAd, (PUCHAR)mpool);
-
-
-	// send wireless event - for set key done WPA2
-	if (pAd->CommonCfg.bWirelessEvent)
-		RTMPSendWirelessEvent(pAd, IW_SET_KEY_DONE_WPA2_EVENT_FLAG, pEntry->Addr, BSS0, 0);
-
-	DBGPRINT(RT_DEBUG_ERROR, ("Wpa2PairMsg3Action <-----\n"));
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Process Group key 2-way handshaking
-
-	Arguments:
-		pAd	Pointer	to our adapter
-		Elem		Message body
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	WpaGroupMsg1Action(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MLME_QUEUE_ELEM	*Elem)
-
-{
-	PUCHAR              pOutBuffer = NULL;
-	UCHAR               Header802_3[14];
-	ULONG               FrameLen = 0;
-	EAPOL_PACKET        Packet;
-	PEAPOL_PACKET       pGroup;
-	UCHAR               *mpool, *digest, *KEYDATA;
-	UCHAR               Mic[16], OldMic[16];
-	UCHAR               GTK[32], Key[32];
-	KEY_INFO			peerKeyInfo;
-
-	// allocate memory
-	os_alloc_mem(pAd, (PUCHAR *)&mpool, 1024);
-
-	if(mpool == NULL)
-		return;
-
-	// digest Len = 80.
-	digest = (UCHAR *) ROUND_UP(mpool, 4);
-	// KEYDATA Len = 512.
-	KEYDATA = (UCHAR *) ROUND_UP(digest + 80, 4);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("WpaGroupMsg1Action ----->\n"));
-
-	// Process Group Message 1 frame. skip 802.11 header(24) & LLC_SNAP header(8)
-	pGroup = (PEAPOL_PACKET) &Elem->Msg[LENGTH_802_11 + LENGTH_802_1_H];
-
-	NdisZeroMemory((PUCHAR)&peerKeyInfo, sizeof(peerKeyInfo));
-	NdisMoveMemory((PUCHAR)&peerKeyInfo, (PUCHAR)&pGroup->KeyDesc.KeyInfo, sizeof(KEY_INFO));
-
-	*((USHORT*)&peerKeyInfo) = cpu2le16(*((USHORT*)&peerKeyInfo));
-
-	// 0. Check cipher type match
-	if (pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled && (peerKeyInfo.KeyDescVer != 2))
-	{
-		os_free_mem(pAd, (PUCHAR)mpool);
-		return;
-	}
-	else if (pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled && (peerKeyInfo.KeyDescVer != 1))
-	{
-		os_free_mem(pAd, (PUCHAR)mpool);
-		return;
-	}
-
-	// 1. Verify Replay counter
-	//    Check Replay Counter, it has to be larger than last one. No need to be exact one larger
-	if(RTMPCompareMemory(pGroup->KeyDesc.ReplayCounter, pAd->StaCfg.ReplayCounter, LEN_KEY_DESC_REPLAY) != 1)
-	{
-		os_free_mem(pAd, (PUCHAR)mpool);
-		return;
-	}
-
-	// Update new replay counter
-	NdisMoveMemory(pAd->StaCfg.ReplayCounter, pGroup->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-
-	// 2. Verify MIC is valid
-	// Save the MIC and replace with zero
-	NdisMoveMemory(OldMic, pGroup->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
-	NdisZeroMemory(pGroup->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
-
-	if(pAd->StaCfg.WepStatus  == Ndis802_11Encryption3Enabled)
-	{	// AES
-		HMAC_SHA1((PUCHAR) pGroup, pGroup->Body_Len[1] + 4, pAd->StaCfg.PTK, LEN_EAP_MICK, digest);
-		NdisMoveMemory(Mic, digest, LEN_KEY_DESC_MIC);
-	}
-	else
-	{	// TKIP
-		hmac_md5(pAd->StaCfg.PTK, LEN_EAP_MICK, (PUCHAR) pGroup, pGroup->Body_Len[1] + 4, Mic);
-	}
-
-	if(!NdisEqualMemory(OldMic, Mic, LEN_KEY_DESC_MIC))
-	{
-		DBGPRINT(RT_DEBUG_ERROR, (" MIC Different in group msg 1 of 2-way handshake!!!!!!!!!! \n"));
-		MlmeFreeMemory(pAd, (PUCHAR)mpool);
-		return;
-	}
-	else
-		DBGPRINT(RT_DEBUG_TRACE, (" MIC VALID in group msg 1 of 2-way handshake!!!!!!!!!! \n"));
-
-
-	// 3. Decrypt GTK from Key Data
-	if (pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled)
-	{
-		// Decrypt AES GTK
-		AES_GTK_KEY_UNWRAP(&pAd->StaCfg.PTK[16], KEYDATA,  pGroup->KeyDesc.KeyDataLen[1], pGroup->KeyDesc.KeyData);
-	}
-	else	// TKIP
-	{
-		INT i;
-
-		// Decrypt TKIP GTK
-		// Construct 32 bytes RC4 Key
-		NdisMoveMemory(Key, pGroup->KeyDesc.KeyIv, 16);
-		NdisMoveMemory(&Key[16], &pAd->StaCfg.PTK[16], 16);
-		ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, Key, 32);
-		//discard first 256 bytes
-		for(i = 0; i < 256; i++)
-			ARCFOUR_BYTE(&pAd->PrivateInfo.WEPCONTEXT);
-		// Decrypt GTK. Becareful, there is no ICV to check the result is correct or not
-		ARCFOUR_DECRYPT(&pAd->PrivateInfo.WEPCONTEXT, KEYDATA, pGroup->KeyDesc.KeyData, pGroup->KeyDesc.KeyDataLen[1]);
-	}
-
-	// Process decrypted key data material
-	// Parse keyData to handle KDE format for WPA2PSK
-	if (peerKeyInfo.EKD_DL)
-	{
-		if (!ParseKeyData(pAd, KEYDATA, pGroup->KeyDesc.KeyDataLen[1], 0))
-		{
-			os_free_mem(pAd, (PUCHAR)mpool);
-			return;
-		}
-	}
-	else	// WPAPSK
-	{
-		// set key material, TxMic and RxMic for WPAPSK
-		NdisMoveMemory(GTK, KEYDATA, 32);
-		NdisMoveMemory(pAd->StaCfg.GTK, GTK, 32);
-		pAd->StaCfg.DefaultKeyId = peerKeyInfo.KeyIndex;
-
-		// Prepare pair-wise key information into shared key table
-		NdisZeroMemory(&pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId], sizeof(CIPHER_KEY));
-		pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].KeyLen = LEN_TKIP_EK;
-		NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key, GTK, LEN_TKIP_EK);
-		NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].RxMic, &GTK[16], LEN_TKIP_RXMICK);
-		NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].TxMic, &GTK[24], LEN_TKIP_TXMICK);
-
-		// Update Shared Key CipherAlg
-		pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_NONE;
-		if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption2Enabled)
-			pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_TKIP;
-		else if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled)
-			pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_AES;
-		else if (pAd->StaCfg.GroupCipher == Ndis802_11GroupWEP40Enabled)
-			pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_WEP64;
-		else if (pAd->StaCfg.GroupCipher == Ndis802_11GroupWEP104Enabled)
-			pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_WEP128;
-
-    	//hex_dump("Group Key :", pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key, LEN_TKIP_EK);
-	}
-
-	// Update group key information to ASIC Shared Key Table
-	AsicAddSharedKeyEntry(pAd,
-						  BSS0,
-						  pAd->StaCfg.DefaultKeyId,
-						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg,
-						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key,
-						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].TxMic,
-						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].RxMic);
-
-	// Update ASIC WCID attribute table and IVEIV table
-	RTMPAddWcidAttributeEntry(pAd,
-							  BSS0,
-							  pAd->StaCfg.DefaultKeyId,
-							  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg,
-							  NULL);
-
-	// set 802.1x port control
-	//pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-	STA_PORT_SECURED(pAd);
-
-    // Indicate Connected for GUI
-    pAd->IndicateMediaState = NdisMediaStateConnected;
-
-	// init header and Fill Packet
-	MAKE_802_3_HEADER(Header802_3, pAd->CommonCfg.Bssid, pAd->CurrentAddress, EAPOL);
-
-	// Zero Group message 1 body
-	NdisZeroMemory(&Packet, sizeof(Packet));
-	Packet.ProVer	= EAPOL_VER;
-	Packet.ProType	= EAPOLKey;
-	Packet.Body_Len[1]  = sizeof(KEY_DESCRIPTER) - MAX_LEN_OF_RSNIE;		// No data field
-
-	//
-	// Group Message 2 as  EAPOL-Key(1,0,0,0,G,0,0,MIC,0)
-	//
-	if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)
-	{
-		Packet.KeyDesc.Type = WPA2_KEY_DESC;
-	}
-	else
-	{
-		Packet.KeyDesc.Type = WPA1_KEY_DESC;
-	}
-
-	// Key descriptor version and appropriate RSN IE
-	Packet.KeyDesc.KeyInfo.KeyDescVer = peerKeyInfo.KeyDescVer;
-
-	// Update Key Length
-	Packet.KeyDesc.KeyLength[0] = pGroup->KeyDesc.KeyLength[0];
-	Packet.KeyDesc.KeyLength[1] = pGroup->KeyDesc.KeyLength[1];
-
-	// Key Index as G-Msg 1
-	if(pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK)
-		Packet.KeyDesc.KeyInfo.KeyIndex = peerKeyInfo.KeyIndex;
-
-	// Key Type Group key
-	Packet.KeyDesc.KeyInfo.KeyType = GROUPKEY;
-
-	// KeyMic field presented
-	Packet.KeyDesc.KeyInfo.KeyMic  = 1;
-
-	// Secure bit
-	Packet.KeyDesc.KeyInfo.Secure  = 1;
-
-	// Convert to little-endian format.
-	*((USHORT *)&Packet.KeyDesc.KeyInfo) = cpu2le16(*((USHORT *)&Packet.KeyDesc.KeyInfo));
-
-	// Key Replay count
-	NdisMoveMemory(Packet.KeyDesc.ReplayCounter, pGroup->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-
-	// Out buffer for transmitting group message 2
-	MlmeAllocateMemory(pAd, (PUCHAR *)&pOutBuffer);  // allocate memory
-	if(pOutBuffer == NULL)
-	{
-		MlmeFreeMemory(pAd, (PUCHAR)mpool);
-		return;
-	}
-
-	// Prepare EAPOL frame for MIC calculation
-	// Be careful, only EAPOL frame is counted for MIC calculation
-	MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-		Packet.Body_Len[1] + 4,    &Packet,
-		END_OF_ARGS);
-
-	// Prepare and Fill MIC value
-	NdisZeroMemory(Mic, sizeof(Mic));
-	if(pAd->StaCfg.WepStatus  == Ndis802_11Encryption3Enabled)
-	{
-		// AES
-		HMAC_SHA1(pOutBuffer, FrameLen, pAd->StaCfg.PTK, LEN_EAP_MICK, digest);
-		NdisMoveMemory(Mic, digest, LEN_KEY_DESC_MIC);
-	}
-	else
-	{
-		hmac_md5(pAd->StaCfg.PTK, LEN_EAP_MICK, pOutBuffer, FrameLen, Mic);
-	}
-	NdisMoveMemory(Packet.KeyDesc.KeyMic, Mic, LEN_KEY_DESC_MIC);
-
-
-	MakeOutgoingFrame(pOutBuffer,       		&FrameLen,
-						LENGTH_802_3,     		&Header802_3,
-						Packet.Body_Len[1] + 4, &Packet,
-						END_OF_ARGS);
-
-
-	// 5. Copy frame to Tx ring and prepare for encryption
-	RTMPToWirelessSta(pAd, Header802_3, LENGTH_802_3, (PUCHAR)&Packet, Packet.Body_Len[1] + 4, FALSE);
-
-	// 6 Free allocated memory
-	MlmeFreeMemory(pAd, (PUCHAR)pOutBuffer);
-	os_free_mem(pAd, (PUCHAR)mpool);
-
-	// send wireless event - for set key done WPA2
-	if (pAd->CommonCfg.bWirelessEvent)
-		RTMPSendWirelessEvent(pAd, IW_SET_KEY_DONE_WPA2_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("WpaGroupMsg1Action <-----\n"));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Init WPA MAC header
-
-	Arguments:
-		pAd	Pointer	to our adapter
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	WpaMacHeaderInit(
-	IN		PRTMP_ADAPTER	pAd,
-	IN OUT	PHEADER_802_11	pHdr80211,
-	IN		UCHAR			wep,
-	IN		PUCHAR		    pAddr1)
-{
-	NdisZeroMemory(pHdr80211, sizeof(HEADER_802_11));
-	pHdr80211->FC.Type	= BTYPE_DATA;
-	pHdr80211->FC.ToDs	= 1;
-	if (wep	== 1)
-		pHdr80211->FC.Wep = 1;
-
-	 //	Addr1: BSSID, Addr2: SA, Addr3:	DA
-	COPY_MAC_ADDR(pHdr80211->Addr1, pAddr1);
-	COPY_MAC_ADDR(pHdr80211->Addr2, pAd->CurrentAddress);
-	COPY_MAC_ADDR(pHdr80211->Addr3, pAd->CommonCfg.Bssid);
-	pHdr80211->Sequence =	pAd->Sequence;
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Copy frame from waiting queue into relative ring buffer and set
-	appropriate ASIC register to kick hardware encryption before really
-	sent out to air.
-
-	Arguments:
-		pAd		Pointer	to our adapter
-		PNDIS_PACKET	Pointer to outgoing Ndis frame
-		NumberOfFrag	Number of fragment required
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID    RTMPToWirelessSta(
-	IN	PRTMP_ADAPTER	pAd,
-	IN  PUCHAR          pHeader802_3,
-    IN  UINT            HdrLen,
-	IN  PUCHAR          pData,
-    IN  UINT            DataLen,
-    IN	BOOLEAN			is4wayFrame)
-
-{
-	NDIS_STATUS     Status;
-	PNDIS_PACKET    pPacket;
-	UCHAR   Index;
-
-	do
-	{
-		// 1. build a NDIS packet and call RTMPSendPacket();
-		//    be careful about how/when to release this internal allocated NDIS PACKET buffer
-		Status = RTMPAllocateNdisPacket(pAd, &pPacket, pHeader802_3, HdrLen, pData, DataLen);
-		if (Status != NDIS_STATUS_SUCCESS)
-			break;
-
-		if (is4wayFrame)
-			RTMP_SET_PACKET_CLEAR_EAP_FRAME(pPacket, 1);
-		else
-			RTMP_SET_PACKET_CLEAR_EAP_FRAME(pPacket, 0);
-
-		// 2. send out the packet
-		Status = STASendPacket(pAd, pPacket);
-		if(Status == NDIS_STATUS_SUCCESS)
-		{
-			// Dequeue one frame from TxSwQueue0..3 queue and process it
-			// There are three place calling dequeue for TX ring.
-			// 1. Here, right after queueing the frame.
-			// 2. At the end of TxRingTxDone service routine.
-			// 3. Upon NDIS call RTMPSendPackets
-			if((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) &&
-				(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)))
-			{
-				for(Index = 0; Index < 5; Index ++)
-					if(pAd->TxSwQueue[Index].Number > 0)
-						RTMPDeQueuePacket(pAd, FALSE, Index, MAX_TX_PROCESS);
-			}
-		}
-	} while(FALSE);
-
-}
-
-/*
-    ========================================================================
-
-    Routine Description:
-    Check Sanity RSN IE form AP
-
-    Arguments:
-
-    Return Value:
-
-
-    ========================================================================
-*/
-BOOLEAN CheckRSNIE(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pData,
-	IN  UCHAR           DataLen,
-	OUT	UCHAR			*Offset)
-{
-	PUCHAR              pVIE;
-	UCHAR               len;
-	PEID_STRUCT         pEid;
-	BOOLEAN				result = FALSE;
-
-	pVIE = pData;
-	len	 = DataLen;
-	*Offset = 0;
-
-	while (len > sizeof(RSNIE2))
-	{
-		pEid = (PEID_STRUCT) pVIE;
-		// WPA RSN IE
-		if ((pEid->Eid == IE_WPA) && (NdisEqualMemory(pEid->Octet, WPA_OUI, 4)))
-		{
-			if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA || pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) &&
-				(NdisEqualMemory(pVIE, pAd->MacTab.Content[BSSID_WCID].RSN_IE, pAd->MacTab.Content[BSSID_WCID].RSNIE_Len)) &&
-				(pAd->MacTab.Content[BSSID_WCID].RSNIE_Len == (pEid->Len + 2)))
-			{
-					DBGPRINT(RT_DEBUG_TRACE, ("CheckRSNIE ==> WPA/WPAPSK RSN IE matched in Msg 3, Length(%d) \n", (pEid->Len + 2)));
-					result = TRUE;
-			}
-
-			*Offset += (pEid->Len + 2);
-		}
-		// WPA2 RSN IE
-		else if ((pEid->Eid == IE_RSN) && (NdisEqualMemory(pEid->Octet + 2, RSN_OUI, 3)))
-		{
-			if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2 || pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK) &&
-				(NdisEqualMemory(pVIE, pAd->MacTab.Content[BSSID_WCID].RSN_IE, pAd->MacTab.Content[BSSID_WCID].RSNIE_Len)) &&
-				(pAd->MacTab.Content[BSSID_WCID].RSNIE_Len == (pEid->Len + 2)))
-			{
-					DBGPRINT(RT_DEBUG_TRACE, ("CheckRSNIE ==> WPA2/WPA2PSK RSN IE matched in Msg 3, Length(%d) \n", (pEid->Len + 2)));
-					result = TRUE;
-			}
-
-			*Offset += (pEid->Len + 2);
-		}
-		else
-		{
-			break;
-		}
-
-		pVIE += (pEid->Len + 2);
-		len  -= (pEid->Len + 2);
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("CheckRSNIE ==> skip_offset(%d) \n", *Offset));
-
-	return result;
-
-}
-
-
-/*
-    ========================================================================
-
-    Routine Description:
-    Parse KEYDATA field.  KEYDATA[] May contain 2 RSN IE and optionally GTK.
-    GTK  is encaptulated in KDE format at  p.83 802.11i D10
-
-    Arguments:
-
-    Return Value:
-
-    Note:
-        802.11i D10
-
-    ========================================================================
-*/
-BOOLEAN ParseKeyData(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pKeyData,
-	IN  UCHAR           KeyDataLen,
-	IN	UCHAR			bPairewise)
-{
-    PKDE_ENCAP          pKDE = NULL;
-    PUCHAR              pMyKeyData = pKeyData;
-    UCHAR               KeyDataLength = KeyDataLen;
-    UCHAR               GTKLEN;
-	UCHAR				skip_offset;
-
-	// Verify The RSN IE contained in Pairewise-Msg 3 and skip it
-	if (bPairewise)
-    {
-		// Check RSN IE whether it is WPA2/WPA2PSK
-		if (!CheckRSNIE(pAd, pKeyData, KeyDataLen, &skip_offset))
-		{
-			DBGPRINT(RT_DEBUG_ERROR, ("ParseKeyData ==> WPA2/WPA2PSK RSN IE mismatched \n"));
-			hex_dump("Get KEYDATA :", pKeyData, KeyDataLen);
-			return FALSE;
-    	}
-    	else
-		{
-			// skip RSN IE
-			pMyKeyData += skip_offset;
-			KeyDataLength -= skip_offset;
-
-			//DBGPRINT(RT_DEBUG_TRACE, ("ParseKeyData ==> WPA2/WPA2PSK RSN IE matched in Msg 3, Length(%d) \n", skip_offset));
-		}
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE,("ParseKeyData ==> KeyDataLength %d without RSN_IE \n", KeyDataLength));
-
-	// Parse EKD format
-	if (KeyDataLength >= 8)
-    {
-        pKDE = (PKDE_ENCAP) pMyKeyData;
-    }
-	else
-    {
-		DBGPRINT(RT_DEBUG_ERROR, ("ERROR: KeyDataLength is too short \n"));
-        return FALSE;
-    }
-
-
-	// Sanity check - shared key index should not be 0
-	if (pKDE->GTKEncap.Kid == 0)
-    {
-        DBGPRINT(RT_DEBUG_ERROR, ("ERROR: GTK Key index zero \n"));
-        return FALSE;
-    }
-
-	// Sanity check - KED length
-	if (KeyDataLength < (pKDE->Len + 2))
-    {
-        DBGPRINT(RT_DEBUG_ERROR, ("ERROR: The len from KDE is too short \n"));
-        return FALSE;
-    }
-
-	// Get GTK length - refer to IEEE 802.11i-2004 p.82
-	GTKLEN = pKDE->Len -6;
-
-	if (GTKLEN < MIN_LEN_OF_GTK)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("ERROR: GTK Key length is too short (%d) \n", GTKLEN));
-        return FALSE;
-	}
-	else
-		DBGPRINT(RT_DEBUG_TRACE, ("GTK Key with KDE formet got index=%d, len=%d \n", pKDE->GTKEncap.Kid, GTKLEN));
-
-	// Update GTK
-	// set key material, TxMic and RxMic for WPAPSK
-	NdisMoveMemory(pAd->StaCfg.GTK, pKDE->GTKEncap.GTK, 32);
-	pAd->StaCfg.DefaultKeyId = pKDE->GTKEncap.Kid;
-
-	// Update shared key table
-	NdisZeroMemory(&pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId], sizeof(CIPHER_KEY));
-	pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].KeyLen = LEN_TKIP_EK;
-	NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key, pKDE->GTKEncap.GTK, LEN_TKIP_EK);
-	NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].RxMic, &pKDE->GTKEncap.GTK[16], LEN_TKIP_RXMICK);
-	NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].TxMic, &pKDE->GTKEncap.GTK[24], LEN_TKIP_TXMICK);
-
-	// Update Shared Key CipherAlg
-	pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_NONE;
-	if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption2Enabled)
-		pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_TKIP;
-	else if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled)
-		pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_AES;
-	else if (pAd->StaCfg.GroupCipher == Ndis802_11GroupWEP40Enabled)
-		pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_WEP64;
-	else if (pAd->StaCfg.GroupCipher == Ndis802_11GroupWEP104Enabled)
-		pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_WEP128;
-
-	return TRUE;
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Cisco CCKM PRF function
-
-	Arguments:
-		key				Cisco Base Transient Key (BTK)
-		key_len			The key length of the BTK
-		data			Ruquest Number(RN) + BSSID
-		data_len		The length of the data
-		output			Store for PTK(Pairwise transient keys)
-		len				The length of the output
-	Return Value:
-		None
-
-	Note:
-		802.1i	Annex F.9
-
-	========================================================================
-*/
-VOID CCKMPRF(
-	IN	UCHAR	*key,
-	IN	INT		key_len,
-	IN	UCHAR	*data,
-	IN	INT		data_len,
-	OUT	UCHAR	*output,
-	IN	INT		len)
-{
-	INT		i;
-	UCHAR	input[1024];
-	INT		currentindex = 0;
-	INT		total_len;
-
-	NdisMoveMemory(input, data, data_len);
-	total_len = data_len;
-	input[total_len] = 0;
-	total_len++;
-	for	(i = 0;	i <	(len + 19) / 20; i++)
-	{
-		HMAC_SHA1(input, total_len,	key, key_len, &output[currentindex]);
-		currentindex +=	20;
-		input[total_len - 1]++;
-	}
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Process MIC error indication and record MIC error timer.
-
-	Arguments:
-		pAd 	Pointer to our adapter
-		pWpaKey 		Pointer to the WPA key structure
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPReportMicError(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PCIPHER_KEY 	pWpaKey)
-{
-	ULONG	Now;
-    UCHAR   unicastKey = (pWpaKey->Type == PAIRWISE_KEY ? 1:0);
-
-	// Record Last MIC error time and count
-	Now = jiffies;
-	if (pAd->StaCfg.MicErrCnt == 0)
-	{
-		pAd->StaCfg.MicErrCnt++;
-		pAd->StaCfg.LastMicErrorTime = Now;
-        NdisZeroMemory(pAd->StaCfg.ReplayCounter, 8);
-	}
-	else if (pAd->StaCfg.MicErrCnt == 1)
-	{
-		if ((pAd->StaCfg.LastMicErrorTime + (60 * OS_HZ)) < Now)
-		{
-			// Update Last MIC error time, this did not violate two MIC errors within 60 seconds
-			pAd->StaCfg.LastMicErrorTime = Now;
-		}
-		else
-		{
-
-			if (pAd->CommonCfg.bWirelessEvent)
-				RTMPSendWirelessEvent(pAd, IW_COUNTER_MEASURES_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-
-			pAd->StaCfg.LastMicErrorTime = Now;
-			// Violate MIC error counts, MIC countermeasures kicks in
-			pAd->StaCfg.MicErrCnt++;
-			// We shall block all reception
-			// We shall clean all Tx ring and disassoicate from AP after next EAPOL frame
-			//
-			// No necessary to clean all Tx ring, on RTMPHardTransmit will stop sending non-802.1X EAPOL packets
-			// if pAd->StaCfg.MicErrCnt greater than 2.
-			//
-			// RTMPRingCleanUp(pAd, QID_AC_BK);
-			// RTMPRingCleanUp(pAd, QID_AC_BE);
-			// RTMPRingCleanUp(pAd, QID_AC_VI);
-			// RTMPRingCleanUp(pAd, QID_AC_VO);
-			// RTMPRingCleanUp(pAd, QID_HCCA);
-		}
-	}
-	else
-	{
-		// MIC error count >= 2
-		// This should not happen
-		;
-	}
-    MlmeEnqueue(pAd,
-				MLME_CNTL_STATE_MACHINE,
-				OID_802_11_MIC_FAILURE_REPORT_FRAME,
-				1,
-				&unicastKey);
-
-    if (pAd->StaCfg.MicErrCnt == 2)
-    {
-        RTMPSetTimer(&pAd->StaCfg.WpaDisassocAndBlockAssocTimer, 100);
-    }
-}
-
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-#define	LENGTH_EAP_H    4
-// If the received frame is EAP-Packet ,find out its EAP-Code (Request(0x01), Response(0x02), Success(0x03), Failure(0x04)).
-INT	    WpaCheckEapCode(
-	IN  PRTMP_ADAPTER   		pAd,
-	IN  PUCHAR				pFrame,
-	IN  USHORT				FrameLen,
-	IN  USHORT				OffSet)
-{
-
-	PUCHAR	pData;
-	INT	result = 0;
-
-	if( FrameLen < OffSet + LENGTH_EAPOL_H + LENGTH_EAP_H )
-		return result;
-
-	pData = pFrame + OffSet; // skip offset bytes
-
-	if(*(pData+1) == EAPPacket) 	// 802.1x header - Packet Type
-	{
-		 result = *(pData+4);		// EAP header - Code
-	}
-
-	return result;
-}
-
-VOID    WpaSendMicFailureToWpaSupplicant(
-    IN  PRTMP_ADAPTER    pAd,
-    IN  BOOLEAN          bUnicast)
-{
-    union iwreq_data    wrqu;
-    char custom[IW_CUSTOM_MAX] = {0};
-
-    sprintf(custom, "MLME-MICHAELMICFAILURE.indication");
-    if (bUnicast)
-        sprintf(custom, "%s unicast", custom);
-    wrqu.data.length = strlen(custom);
-    wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, custom);
-
-    return;
-}
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-VOID	WpaMicFailureReportFrame(
-	IN  PRTMP_ADAPTER   pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	PUCHAR              pOutBuffer = NULL;
-	UCHAR               Header802_3[14];
-	ULONG               FrameLen = 0;
-	EAPOL_PACKET        Packet;
-	UCHAR               Mic[16];
-    BOOLEAN             bUnicast;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("WpaMicFailureReportFrame ----->\n"));
-
-    bUnicast = (Elem->Msg[0] == 1 ? TRUE:FALSE);
-	pAd->Sequence = ((pAd->Sequence) + 1) & (MAX_SEQ_NUMBER);
-
-	// init 802.3 header and Fill Packet
-	MAKE_802_3_HEADER(Header802_3, pAd->CommonCfg.Bssid, pAd->CurrentAddress, EAPOL);
-
-	NdisZeroMemory(&Packet, sizeof(Packet));
-	Packet.ProVer	= EAPOL_VER;
-	Packet.ProType	= EAPOLKey;
-
-	Packet.KeyDesc.Type = WPA1_KEY_DESC;
-
-    // Request field presented
-    Packet.KeyDesc.KeyInfo.Request = 1;
-
-	if(pAd->StaCfg.WepStatus  == Ndis802_11Encryption3Enabled)
-	{
-		Packet.KeyDesc.KeyInfo.KeyDescVer = 2;
-	}
-	else	  // TKIP
-	{
-		Packet.KeyDesc.KeyInfo.KeyDescVer = 1;
-	}
-
-    Packet.KeyDesc.KeyInfo.KeyType = (bUnicast ? PAIRWISEKEY : GROUPKEY);
-
-	// KeyMic field presented
-	Packet.KeyDesc.KeyInfo.KeyMic  = 1;
-
-    // Error field presented
-	Packet.KeyDesc.KeyInfo.Error  = 1;
-
-	// Update packet length after decide Key data payload
-	Packet.Body_Len[1]  = sizeof(KEY_DESCRIPTER) - MAX_LEN_OF_RSNIE;
-
-	// Key Replay Count
-	NdisMoveMemory(Packet.KeyDesc.ReplayCounter, pAd->StaCfg.ReplayCounter, LEN_KEY_DESC_REPLAY);
-    inc_byte_array(pAd->StaCfg.ReplayCounter, 8);
-
-	// Convert to little-endian format.
-	*((USHORT *)&Packet.KeyDesc.KeyInfo) = cpu2le16(*((USHORT *)&Packet.KeyDesc.KeyInfo));
-
-
-	MlmeAllocateMemory(pAd, (PUCHAR *)&pOutBuffer);  // allocate memory
-	if(pOutBuffer == NULL)
-	{
-		return;
-	}
-
-	// Prepare EAPOL frame for MIC calculation
-	// Be careful, only EAPOL frame is counted for MIC calculation
-	MakeOutgoingFrame(pOutBuffer,               &FrameLen,
-		              Packet.Body_Len[1] + 4,   &Packet,
-		              END_OF_ARGS);
-
-	// Prepare and Fill MIC value
-	NdisZeroMemory(Mic, sizeof(Mic));
-	if(pAd->StaCfg.WepStatus  == Ndis802_11Encryption3Enabled)
-	{	// AES
-        UCHAR digest[20] = {0};
-		HMAC_SHA1(pOutBuffer, FrameLen, pAd->StaCfg.PTK, LEN_EAP_MICK, digest);
-		NdisMoveMemory(Mic, digest, LEN_KEY_DESC_MIC);
-	}
-	else
-	{	// TKIP
-		hmac_md5(pAd->StaCfg.PTK,  LEN_EAP_MICK, pOutBuffer, FrameLen, Mic);
-	}
-	NdisMoveMemory(Packet.KeyDesc.KeyMic, Mic, LEN_KEY_DESC_MIC);
-
-    MakeOutgoingFrame(pOutBuffer,           	&FrameLen,
-    	  			LENGTH_802_3,     			&Header802_3,
-    				Packet.Body_Len[1] + 4,     &Packet,
-    				END_OF_ARGS);
-
-	// opy frame to Tx ring and send MIC failure report frame to authenticator
-	RTMPToWirelessSta(pAd, Header802_3, LENGTH_802_3, (PUCHAR)&Packet, Packet.Body_Len[1] + 4, FALSE);
-
-	MlmeFreeMemory(pAd, (PUCHAR)pOutBuffer);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("WpaMicFailureReportFrame <-----\n"));
-}
-
-/** from wpa_supplicant
- * inc_byte_array - Increment arbitrary length byte array by one
- * @counter: Pointer to byte array
- * @len: Length of the counter in bytes
- *
- * This function increments the last byte of the counter by one and continues
- * rolling over to more significant bytes if the byte was incremented from
- * 0xff to 0x00.
- */
-void inc_byte_array(UCHAR *counter, int len)
-{
-	int pos = len - 1;
-	while (pos >= 0) {
-		counter[pos]++;
-		if (counter[pos] != 0)
-			break;
-		pos--;
-	}
-}
-
-VOID WpaDisassocApAndBlockAssoc(
-    IN PVOID SystemSpecific1,
-    IN PVOID FunctionContext,
-    IN PVOID SystemSpecific2,
-    IN PVOID SystemSpecific3)
-{
-    RTMP_ADAPTER                *pAd = (PRTMP_ADAPTER)FunctionContext;
-    MLME_DISASSOC_REQ_STRUCT    DisassocReq;
-
-	// disassoc from current AP first
-	DBGPRINT(RT_DEBUG_TRACE, ("RTMPReportMicError - disassociate with current AP after sending second continuous EAPOL frame\n"));
-	DisassocParmFill(pAd, &DisassocReq, pAd->CommonCfg.Bssid, REASON_MIC_FAILURE);
-	MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ, sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq);
-
-	pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_DISASSOC;
-	pAd->StaCfg.bBlockAssoc = TRUE;
-}
-
+#include "../../rt2860/sta/wpa.c"
diff --git a/drivers/staging/rt2870/sta_ioctl.c b/drivers/staging/rt2870/sta_ioctl.c
index 4b432ce4442..3553a6c898b 100644
--- a/drivers/staging/rt2870/sta_ioctl.c
+++ b/drivers/staging/rt2870/sta_ioctl.c
@@ -1,7068 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-    sta_ioctl.c
-
-    Abstract:
-    IOCTL related subroutines
-
-    Revision History:
-    Who         When          What
-    --------    ----------    ----------------------------------------------
-    Rory Chen   01-03-2003    created
-	Rory Chen   02-14-2005    modify to support RT61
-*/
-
-#include	"rt_config.h"
-
-#ifdef DBG
-extern ULONG    RTDebugLevel;
-#endif
-
-#define NR_WEP_KEYS 				4
-#define WEP_SMALL_KEY_LEN 			(40/8)
-#define WEP_LARGE_KEY_LEN 			(104/8)
-
-#define GROUP_KEY_NO                4
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
-#define IWE_STREAM_ADD_EVENT(_A, _B, _C, _D, _E)		iwe_stream_add_event(_A, _B, _C, _D, _E)
-#define IWE_STREAM_ADD_POINT(_A, _B, _C, _D, _E)		iwe_stream_add_point(_A, _B, _C, _D, _E)
-#define IWE_STREAM_ADD_VALUE(_A, _B, _C, _D, _E, _F)	iwe_stream_add_value(_A, _B, _C, _D, _E, _F)
-#else
-#define IWE_STREAM_ADD_EVENT(_A, _B, _C, _D, _E)		iwe_stream_add_event(_B, _C, _D, _E)
-#define IWE_STREAM_ADD_POINT(_A, _B, _C, _D, _E)		iwe_stream_add_point(_B, _C, _D, _E)
-#define IWE_STREAM_ADD_VALUE(_A, _B, _C, _D, _E, _F)	iwe_stream_add_value(_B, _C, _D, _E, _F)
-#endif
-
-extern UCHAR    CipherWpa2Template[];
-extern UCHAR    CipherWpaPskTkip[];
-extern UCHAR    CipherWpaPskTkipLen;
-
-typedef struct PACKED _RT_VERSION_INFO{
-    UCHAR       DriverVersionW;
-    UCHAR       DriverVersionX;
-    UCHAR       DriverVersionY;
-    UCHAR       DriverVersionZ;
-    UINT        DriverBuildYear;
-    UINT        DriverBuildMonth;
-    UINT        DriverBuildDay;
-} RT_VERSION_INFO, *PRT_VERSION_INFO;
-
-struct iw_priv_args privtab[] = {
-{ RTPRIV_IOCTL_SET,
-  IW_PRIV_TYPE_CHAR | 1024, 0,
-  "set"},
-
-{ RTPRIV_IOCTL_SHOW, 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
-  ""},
-{ RTPRIV_IOCTL_SHOW, IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
-  ""},
-/* --- sub-ioctls definitions --- */
-    { SHOW_CONN_STATUS,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "connStatus" },
-	{ SHOW_DRVIER_VERION,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "driverVer" },
-    { SHOW_BA_INFO,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "bainfo" },
-	{ SHOW_DESC_INFO,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "descinfo" },
-    { RAIO_OFF,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "radio_off" },
-	{ RAIO_ON,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "radio_on" },
-#ifdef QOS_DLS_SUPPORT
-	{ SHOW_DLS_ENTRY_INFO,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "dlsentryinfo" },
-#endif // QOS_DLS_SUPPORT //
-	{ SHOW_CFG_VALUE,
-	  IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "show" },
-	{ SHOW_ADHOC_ENTRY_INFO,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "adhocEntry" },
-
-/* --- sub-ioctls relations --- */
-
-#ifdef DBG
-{ RTPRIV_IOCTL_BBP,
-  IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
-  "bbp"},
-{ RTPRIV_IOCTL_MAC,
-  IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | 1024,
-  "mac"},
-{ RTPRIV_IOCTL_E2P,
-  IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | 1024,
-  "e2p"},
-#endif  /* DBG */
-
-{ RTPRIV_IOCTL_STATISTICS,
-  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
-  "stat"},
-{ RTPRIV_IOCTL_GSITESURVEY,
-  0, IW_PRIV_TYPE_CHAR | 1024,
-  "get_site_survey"},
-};
-
-INT Set_SSID_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-#ifdef WMM_SUPPORT
-INT	Set_WmmCapable_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-#endif
-
-INT Set_NetworkType_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_AuthMode_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_EncrypType_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_DefaultKeyID_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_Key1_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_Key2_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_Key3_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_Key4_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_WPAPSK_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-
-INT Set_PSMode_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-INT Set_Wpa_Support(
-    IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef DBG
-VOID RTMPIoctlBBP(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq);
-
-VOID RTMPIoctlMAC(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq);
-
-VOID RTMPIoctlE2PROM(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  struct iwreq    *wrq);
-#endif // DBG //
-
-
-NDIS_STATUS RTMPWPANoneAddKeyProc(
-    IN  PRTMP_ADAPTER   pAd,
-    IN	PVOID			pBuf);
-
-INT Set_FragTest_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-#ifdef DOT11_N_SUPPORT
-INT Set_TGnWifiTest_Proc(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          arg);
-#endif // DOT11_N_SUPPORT //
-
-INT Set_LongRetryLimit_Proc(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	PUCHAR			arg);
-
-INT Set_ShortRetryLimit_Proc(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	PUCHAR			arg);
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-INT Set_Ieee80211dClientMode_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-#endif // EXT_BUILD_CHANNEL_LIST //
-
-#ifdef CARRIER_DETECTION_SUPPORT
-INT Set_CarrierDetect_Proc(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          arg);
-#endif // CARRIER_DETECTION_SUPPORT //
-
-INT	Show_Adhoc_MacTable_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PCHAR			extra);
-
-static struct {
-	CHAR *name;
-	INT (*set_proc)(PRTMP_ADAPTER pAdapter, PUCHAR arg);
-} *PRTMP_PRIVATE_SET_PROC, RTMP_PRIVATE_SUPPORT_PROC[] = {
-	{"DriverVersion",				Set_DriverVersion_Proc},
-	{"CountryRegion",				Set_CountryRegion_Proc},
-	{"CountryRegionABand",			Set_CountryRegionABand_Proc},
-	{"SSID",						Set_SSID_Proc},
-	{"WirelessMode",				Set_WirelessMode_Proc},
-	{"TxBurst",					Set_TxBurst_Proc},
-	{"TxPreamble",				Set_TxPreamble_Proc},
-	{"TxPower",					Set_TxPower_Proc},
-	{"Channel",					Set_Channel_Proc},
-	{"BGProtection",				Set_BGProtection_Proc},
-	{"RTSThreshold",				Set_RTSThreshold_Proc},
-	{"FragThreshold",				Set_FragThreshold_Proc},
-#ifdef DOT11_N_SUPPORT
-	{"HtBw",		                Set_HtBw_Proc},
-	{"HtMcs",		                Set_HtMcs_Proc},
-	{"HtGi",		                Set_HtGi_Proc},
-	{"HtOpMode",		            Set_HtOpMode_Proc},
-	{"HtExtcha",		            Set_HtExtcha_Proc},
-	{"HtMpduDensity",		        Set_HtMpduDensity_Proc},
-	{"HtBaWinSize",		        	Set_HtBaWinSize_Proc},
-	{"HtRdg",		        		Set_HtRdg_Proc},
-	{"HtAmsdu",		        		Set_HtAmsdu_Proc},
-	{"HtAutoBa",		        	Set_HtAutoBa_Proc},
-	{"HtBaDecline",					Set_BADecline_Proc},
-	{"HtProtect",		        	Set_HtProtect_Proc},
-	{"HtMimoPs",		        	Set_HtMimoPs_Proc},
-#endif // DOT11_N_SUPPORT //
-
-#ifdef AGGREGATION_SUPPORT
-	{"PktAggregate",				Set_PktAggregate_Proc},
-#endif
-
-#ifdef WMM_SUPPORT
-	{"WmmCapable",					Set_WmmCapable_Proc},
-#endif
-	{"IEEE80211H",					Set_IEEE80211H_Proc},
-    {"NetworkType",                 Set_NetworkType_Proc},
-	{"AuthMode",					Set_AuthMode_Proc},
-	{"EncrypType",					Set_EncrypType_Proc},
-	{"DefaultKeyID",				Set_DefaultKeyID_Proc},
-	{"Key1",						Set_Key1_Proc},
-	{"Key2",						Set_Key2_Proc},
-	{"Key3",						Set_Key3_Proc},
-	{"Key4",						Set_Key4_Proc},
-	{"WPAPSK",						Set_WPAPSK_Proc},
-	{"ResetCounter",				Set_ResetStatCounter_Proc},
-	{"PSMode",                      Set_PSMode_Proc},
-#ifdef DBG
-	{"Debug",						Set_Debug_Proc},
-#endif
-
-#ifdef RALINK_ATE
-	{"ATE",							Set_ATE_Proc},
-	{"ATEDA",						Set_ATE_DA_Proc},
-	{"ATESA",						Set_ATE_SA_Proc},
-	{"ATEBSSID",					Set_ATE_BSSID_Proc},
-	{"ATECHANNEL",					Set_ATE_CHANNEL_Proc},
-	{"ATETXPOW0",					Set_ATE_TX_POWER0_Proc},
-	{"ATETXPOW1",					Set_ATE_TX_POWER1_Proc},
-	{"ATETXANT",					Set_ATE_TX_Antenna_Proc},
-	{"ATERXANT",					Set_ATE_RX_Antenna_Proc},
-	{"ATETXFREQOFFSET",				Set_ATE_TX_FREQOFFSET_Proc},
-	{"ATETXBW",						Set_ATE_TX_BW_Proc},
-	{"ATETXLEN",					Set_ATE_TX_LENGTH_Proc},
-	{"ATETXCNT",					Set_ATE_TX_COUNT_Proc},
-	{"ATETXMCS",					Set_ATE_TX_MCS_Proc},
-	{"ATETXMODE",					Set_ATE_TX_MODE_Proc},
-	{"ATETXGI",						Set_ATE_TX_GI_Proc},
-	{"ATERXFER",					Set_ATE_RX_FER_Proc},
-	{"ATERRF",						Set_ATE_Read_RF_Proc},
-	{"ATEWRF1",						Set_ATE_Write_RF1_Proc},
-	{"ATEWRF2",						Set_ATE_Write_RF2_Proc},
-	{"ATEWRF3",						Set_ATE_Write_RF3_Proc},
-	{"ATEWRF4",						Set_ATE_Write_RF4_Proc},
-	{"ATELDE2P",				    Set_ATE_Load_E2P_Proc},
-	{"ATERE2P",						Set_ATE_Read_E2P_Proc},
-	{"ATESHOW",						Set_ATE_Show_Proc},
-	{"ATEHELP",						Set_ATE_Help_Proc},
-
-#ifdef RALINK_28xx_QA
-	{"TxStop",						Set_TxStop_Proc},
-	{"RxStop",						Set_RxStop_Proc},
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-    {"WpaSupport",                  Set_Wpa_Support},
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-
-
-	{"FixedTxMode",                 Set_FixedTxMode_Proc},
-#ifdef CONFIG_APSTA_MIXED_SUPPORT
-	{"OpMode",						Set_OpMode_Proc},
-#endif // CONFIG_APSTA_MIXED_SUPPORT //
-#ifdef DOT11_N_SUPPORT
-    {"TGnWifiTest",                 Set_TGnWifiTest_Proc},
-    {"ForceGF",		        		Set_ForceGF_Proc},
-#endif // DOT11_N_SUPPORT //
-#ifdef QOS_DLS_SUPPORT
-	{"DlsAddEntry",					Set_DlsAddEntry_Proc},
-	{"DlsTearDownEntry",			Set_DlsTearDownEntry_Proc},
-#endif // QOS_DLS_SUPPORT //
-	{"LongRetry",	        		Set_LongRetryLimit_Proc},
-	{"ShortRetry",	        		Set_ShortRetryLimit_Proc},
-#ifdef EXT_BUILD_CHANNEL_LIST
-	{"11dClientMode",				Set_Ieee80211dClientMode_Proc},
-#endif // EXT_BUILD_CHANNEL_LIST //
-#ifdef CARRIER_DETECTION_SUPPORT
-	{"CarrierDetect",				Set_CarrierDetect_Proc},
-#endif // CARRIER_DETECTION_SUPPORT //
-
-	{NULL,}
-};
-
-
-VOID RTMPAddKey(
-	IN	PRTMP_ADAPTER	    pAd,
-	IN	PNDIS_802_11_KEY    pKey)
-{
-	ULONG				KeyIdx;
-	MAC_TABLE_ENTRY  	*pEntry;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("RTMPAddKey ------>\n"));
-
-	if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-	{
-		if (pKey->KeyIndex & 0x80000000)
-		{
-		    if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
-            {
-                NdisZeroMemory(pAd->StaCfg.PMK, 32);
-                NdisMoveMemory(pAd->StaCfg.PMK, pKey->KeyMaterial, pKey->KeyLength);
-                goto end;
-            }
-		    // Update PTK
-		    NdisZeroMemory(&pAd->SharedKey[BSS0][0], sizeof(CIPHER_KEY));
-            pAd->SharedKey[BSS0][0].KeyLen = LEN_TKIP_EK;
-            NdisMoveMemory(pAd->SharedKey[BSS0][0].Key, pKey->KeyMaterial, LEN_TKIP_EK);
-#ifdef WPA_SUPPLICANT_SUPPORT
-            if (pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled)
-            {
-                NdisMoveMemory(pAd->SharedKey[BSS0][0].RxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK);
-                NdisMoveMemory(pAd->SharedKey[BSS0][0].TxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK);
-            }
-            else
-#endif // WPA_SUPPLICANT_SUPPORT //
-            {
-            	NdisMoveMemory(pAd->SharedKey[BSS0][0].TxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK);
-                NdisMoveMemory(pAd->SharedKey[BSS0][0].RxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK);
-            }
-
-            // Decide its ChiperAlg
-        	if (pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled)
-        		pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_TKIP;
-        	else if (pAd->StaCfg.PairCipher == Ndis802_11Encryption3Enabled)
-        		pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_AES;
-        	else
-        		pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_NONE;
-
-            // Update these related information to MAC_TABLE_ENTRY
-        	pEntry = &pAd->MacTab.Content[BSSID_WCID];
-            NdisMoveMemory(pEntry->PairwiseKey.Key, pAd->SharedKey[BSS0][0].Key, LEN_TKIP_EK);
-        	NdisMoveMemory(pEntry->PairwiseKey.RxMic, pAd->SharedKey[BSS0][0].RxMic, LEN_TKIP_RXMICK);
-        	NdisMoveMemory(pEntry->PairwiseKey.TxMic, pAd->SharedKey[BSS0][0].TxMic, LEN_TKIP_TXMICK);
-        	pEntry->PairwiseKey.CipherAlg = pAd->SharedKey[BSS0][0].CipherAlg;
-
-        	// Update pairwise key information to ASIC Shared Key Table
-        	AsicAddSharedKeyEntry(pAd,
-        						  BSS0,
-        						  0,
-        						  pAd->SharedKey[BSS0][0].CipherAlg,
-        						  pAd->SharedKey[BSS0][0].Key,
-        						  pAd->SharedKey[BSS0][0].TxMic,
-        						  pAd->SharedKey[BSS0][0].RxMic);
-
-        	// Update ASIC WCID attribute table and IVEIV table
-        	RTMPAddWcidAttributeEntry(pAd,
-        							  BSS0,
-        							  0,
-        							  pAd->SharedKey[BSS0][0].CipherAlg,
-        							  pEntry);
-
-            if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA2)
-            {
-                // set 802.1x port control
-	            //pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-				STA_PORT_SECURED(pAd);
-
-                // Indicate Connected for GUI
-                pAd->IndicateMediaState = NdisMediaStateConnected;
-            }
-		}
-        else
-        {
-            // Update GTK
-            pAd->StaCfg.DefaultKeyId = (pKey->KeyIndex & 0xFF);
-            NdisZeroMemory(&pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId], sizeof(CIPHER_KEY));
-            pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].KeyLen = LEN_TKIP_EK;
-            NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key, pKey->KeyMaterial, LEN_TKIP_EK);
-#ifdef WPA_SUPPLICANT_SUPPORT
-            if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption2Enabled)
-            {
-                NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].RxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK);
-                NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].TxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK);
-            }
-            else
-#endif // WPA_SUPPLICANT_SUPPORT //
-            {
-            	NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].TxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK);
-                NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].RxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK);
-            }
-
-            // Update Shared Key CipherAlg
-    		pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_NONE;
-    		if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption2Enabled)
-    			pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_TKIP;
-    		else if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled)
-    			pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_AES;
-
-            // Update group key information to ASIC Shared Key Table
-        	AsicAddSharedKeyEntry(pAd,
-        						  BSS0,
-        						  pAd->StaCfg.DefaultKeyId,
-        						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg,
-        						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key,
-        						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].TxMic,
-        						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].RxMic);
-
-        	// Update ASIC WCID attribute table and IVEIV table
-        	RTMPAddWcidAttributeEntry(pAd,
-        							  BSS0,
-        							  pAd->StaCfg.DefaultKeyId,
-        							  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg,
-        							  NULL);
-
-            // set 802.1x port control
-	        //pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-			STA_PORT_SECURED(pAd);
-
-            // Indicate Connected for GUI
-            pAd->IndicateMediaState = NdisMediaStateConnected;
-        }
-	}
-	else	// dynamic WEP from wpa_supplicant
-	{
-		UCHAR	CipherAlg;
-    	PUCHAR	Key;
-
-		if(pKey->KeyLength == 32)
-			goto end;
-
-		KeyIdx = pKey->KeyIndex & 0x0fffffff;
-
-		if (KeyIdx < 4)
-		{
-			// it is a default shared key, for Pairwise key setting
-			if (pKey->KeyIndex & 0x80000000)
-			{
-				pEntry = MacTableLookup(pAd, pKey->BSSID);
-
-				if (pEntry)
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("RTMPAddKey: Set Pair-wise Key\n"));
-
-					// set key material and key length
- 					pEntry->PairwiseKey.KeyLen = (UCHAR)pKey->KeyLength;
-					NdisMoveMemory(pEntry->PairwiseKey.Key, &pKey->KeyMaterial, pKey->KeyLength);
-
-					// set Cipher type
-					if (pKey->KeyLength == 5)
-						pEntry->PairwiseKey.CipherAlg = CIPHER_WEP64;
-					else
-						pEntry->PairwiseKey.CipherAlg = CIPHER_WEP128;
-
-					// Add Pair-wise key to Asic
-					AsicAddPairwiseKeyEntry(
-						pAd,
-						pEntry->Addr,
-						(UCHAR)pEntry->Aid,
-                		&pEntry->PairwiseKey);
-
-					// update WCID attribute table and IVEIV table for this entry
-					RTMPAddWcidAttributeEntry(
-						pAd,
-						BSS0,
-						KeyIdx, // The value may be not zero
-						pEntry->PairwiseKey.CipherAlg,
-						pEntry);
-
-				}
-			}
-			else
-            {
-				// Default key for tx (shared key)
-				pAd->StaCfg.DefaultKeyId = (UCHAR) KeyIdx;
-
-				// set key material and key length
-				pAd->SharedKey[BSS0][KeyIdx].KeyLen = (UCHAR) pKey->KeyLength;
-				NdisMoveMemory(pAd->SharedKey[BSS0][KeyIdx].Key, &pKey->KeyMaterial, pKey->KeyLength);
-
-				// Set Ciper type
-				if (pKey->KeyLength == 5)
-					pAd->SharedKey[BSS0][KeyIdx].CipherAlg = CIPHER_WEP64;
-				else
-					pAd->SharedKey[BSS0][KeyIdx].CipherAlg = CIPHER_WEP128;
-
-    			CipherAlg = pAd->SharedKey[BSS0][KeyIdx].CipherAlg;
-    			Key = pAd->SharedKey[BSS0][KeyIdx].Key;
-
-				// Set Group key material to Asic
-    			AsicAddSharedKeyEntry(pAd, BSS0, KeyIdx, CipherAlg, Key, NULL, NULL);
-
-				// Update WCID attribute table and IVEIV table for this group key table
-				RTMPAddWcidAttributeEntry(pAd, BSS0, KeyIdx, CipherAlg, NULL);
-
-			}
-		}
-	}
-end:
-	return;
-}
-
-char * rtstrchr(const char * s, int c)
-{
-    for(; *s != (char) c; ++s)
-        if (*s == '\0')
-            return NULL;
-    return (char *) s;
-}
-
-/*
-This is required for LinEX2004/kernel2.6.7 to provide iwlist scanning function
-*/
-
-int
-rt_ioctl_giwname(struct net_device *dev,
-		   struct iw_request_info *info,
-		   char *name, char *extra)
-{
-//	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
-#ifdef RT2870
-	strncpy(name, "RT2870 Wireless", IFNAMSIZ);
-#endif // RT2870 //
-	return 0;
-}
-
-int rt_ioctl_siwfreq(struct net_device *dev,
-			struct iw_request_info *info,
-			struct iw_freq *freq, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-	int 	chan = -1;
-
-    //check if the interface is down
-    if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-        return -ENETDOWN;
-    }
-
-
-	if (freq->e > 1)
-		return -EINVAL;
-
-	if((freq->e == 0) && (freq->m <= 1000))
-		chan = freq->m;	// Setting by channel number
-	else
-		MAP_KHZ_TO_CHANNEL_ID( (freq->m /100) , chan); // Setting by frequency - search the table , like 2.412G, 2.422G,
-
-    if (ChannelSanity(pAdapter, chan) == TRUE)
-    {
-	pAdapter->CommonCfg.Channel = chan;
-	DBGPRINT(RT_DEBUG_ERROR, ("==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x%x] (Channel=%d)\n", SIOCSIWFREQ, pAdapter->CommonCfg.Channel));
-    }
-    else
-        return -EINVAL;
-
-	return 0;
-}
-int rt_ioctl_giwfreq(struct net_device *dev,
-		   struct iw_request_info *info,
-		   struct iw_freq *freq, char *extra)
-{
-    VIRTUAL_ADAPTER *pVirtualAd = NULL;
-	PRTMP_ADAPTER pAdapter = NULL;
-	UCHAR ch;
-	ULONG	m;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->ml_priv;
-	}
-	else
-	{
-		pVirtualAd = dev->ml_priv;
-		if (pVirtualAd && pVirtualAd->RtmpDev)
-			pAdapter = pVirtualAd->RtmpDev->ml_priv;
-	}
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->ml_priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-		ch = pAdapter->CommonCfg.Channel;
-
-	DBGPRINT(RT_DEBUG_TRACE,("==>rt_ioctl_giwfreq  %d\n", ch));
-
-    MAP_CHANNEL_ID_TO_KHZ(ch, m);
-	freq->m = m * 100;
-	freq->e = 1;
-	return 0;
-}
-
-int rt_ioctl_siwmode(struct net_device *dev,
-		   struct iw_request_info *info,
-		   __u32 *mode, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
-	//check if the interface is down
-    if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-    	DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-       	return -ENETDOWN;
-    }
-
-	switch (*mode)
-	{
-		case IW_MODE_ADHOC:
-			Set_NetworkType_Proc(pAdapter, "Adhoc");
-			break;
-		case IW_MODE_INFRA:
-			Set_NetworkType_Proc(pAdapter, "Infra");
-			break;
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,4,20))
-        case IW_MODE_MONITOR:
-			Set_NetworkType_Proc(pAdapter, "Monitor");
-			break;
-#endif
-		default:
-			DBGPRINT(RT_DEBUG_TRACE, ("===>rt_ioctl_siwmode::SIOCSIWMODE (unknown %d)\n", *mode));
-			return -EINVAL;
-	}
-
-	// Reset Ralink supplicant to not use, it will be set to start when UI set PMK key
-	pAdapter->StaCfg.WpaState = SS_NOTUSE;
-
-	return 0;
-}
-
-int rt_ioctl_giwmode(struct net_device *dev,
-		   struct iw_request_info *info,
-		   __u32 *mode, char *extra)
-{
-	PRTMP_ADAPTER 	pAdapter = NULL;
-	VIRTUAL_ADAPTER *pVirtualAd = NULL;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->ml_priv;
-	}
-	else
-	{
-		pVirtualAd = dev->ml_priv;
-		if (pVirtualAd && pVirtualAd->RtmpDev)
-			pAdapter = pVirtualAd->RtmpDev->ml_priv;
-	}
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->ml_priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-	if (ADHOC_ON(pAdapter))
-		*mode = IW_MODE_ADHOC;
-    else if (INFRA_ON(pAdapter))
-		*mode = IW_MODE_INFRA;
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,4,20))
-    else if (MONITOR_ON(pAdapter))
-    {
-        *mode = IW_MODE_MONITOR;
-    }
-#endif
-    else
-        *mode = IW_MODE_AUTO;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("==>rt_ioctl_giwmode(mode=%d)\n", *mode));
-	return 0;
-}
-
-int rt_ioctl_siwsens(struct net_device *dev,
-		   struct iw_request_info *info,
-		   char *name, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
-	//check if the interface is down
-    	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    	{
-        	DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-        	return -ENETDOWN;
-    	}
-
-	return 0;
-}
-
-int rt_ioctl_giwsens(struct net_device *dev,
-		   struct iw_request_info *info,
-		   char *name, char *extra)
-{
-	return 0;
-}
-
-int rt_ioctl_giwrange(struct net_device *dev,
-		   struct iw_request_info *info,
-		   struct iw_point *data, char *extra)
-{
-	PRTMP_ADAPTER 	pAdapter = NULL;
-	VIRTUAL_ADAPTER *pVirtualAd = NULL;
-	struct iw_range *range = (struct iw_range *) extra;
-	u16 val;
-	int i;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->ml_priv;
-	}
-	else
-	{
-		pVirtualAd = dev->ml_priv;
-		if (pVirtualAd && pVirtualAd->RtmpDev)
-			pAdapter = pVirtualAd->RtmpDev->ml_priv;
-	}
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->ml_priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE ,("===>rt_ioctl_giwrange\n"));
-	data->length = sizeof(struct iw_range);
-	memset(range, 0, sizeof(struct iw_range));
-
-	range->txpower_capa = IW_TXPOW_DBM;
-
-	if (INFRA_ON(pAdapter)||ADHOC_ON(pAdapter))
-	{
-		range->min_pmp = 1 * 1024;
-		range->max_pmp = 65535 * 1024;
-		range->min_pmt = 1 * 1024;
-		range->max_pmt = 1000 * 1024;
-		range->pmp_flags = IW_POWER_PERIOD;
-		range->pmt_flags = IW_POWER_TIMEOUT;
-		range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT |
-			IW_POWER_UNICAST_R | IW_POWER_ALL_R;
-	}
-
-	range->we_version_compiled = WIRELESS_EXT;
-	range->we_version_source = 14;
-
-	range->retry_capa = IW_RETRY_LIMIT;
-	range->retry_flags = IW_RETRY_LIMIT;
-	range->min_retry = 0;
-	range->max_retry = 255;
-
-	range->num_channels =  pAdapter->ChannelListNum;
-
-	val = 0;
-	for (i = 1; i <= range->num_channels; i++)
-	{
-		u32 m;
-		range->freq[val].i = pAdapter->ChannelList[i-1].Channel;
-		MAP_CHANNEL_ID_TO_KHZ(pAdapter->ChannelList[i-1].Channel, m);
-		range->freq[val].m = m * 100; /* HZ */
-
-		range->freq[val].e = 1;
-		val++;
-		if (val == IW_MAX_FREQUENCIES)
-			break;
-	}
-	range->num_frequency = val;
-
-	range->max_qual.qual = 100; /* what is correct max? This was not
-					* documented exactly. At least
-					* 69 has been observed. */
-	range->max_qual.level = 0; /* dB */
-	range->max_qual.noise = 0; /* dB */
-
-	/* What would be suitable values for "average/typical" qual? */
-	range->avg_qual.qual = 20;
-	range->avg_qual.level = -60;
-	range->avg_qual.noise = -95;
-	range->sensitivity = 3;
-
-	range->max_encoding_tokens = NR_WEP_KEYS;
-	range->num_encoding_sizes = 2;
-	range->encoding_size[0] = 5;
-	range->encoding_size[1] = 13;
-
-	range->min_rts = 0;
-	range->max_rts = 2347;
-	range->min_frag = 256;
-	range->max_frag = 2346;
-
-#if WIRELESS_EXT > 17
-	/* IW_ENC_CAPA_* bit field */
-	range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 |
-					IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP;
-#endif
-
-	return 0;
-}
-
-int rt_ioctl_siwap(struct net_device *dev,
-		      struct iw_request_info *info,
-		      struct sockaddr *ap_addr, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-    NDIS_802_11_MAC_ADDRESS Bssid;
-
-	//check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-       	DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-       	return -ENETDOWN;
-    }
-
-	if (pAdapter->Mlme.CntlMachine.CurrState != CNTL_IDLE)
-    {
-        RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-        DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
-    }
-
-    // tell CNTL state machine to call NdisMSetInformationComplete() after completing
-    // this request, because this request is initiated by NDIS.
-    pAdapter->MlmeAux.CurrReqIsFromNdis = FALSE;
-	// Prevent to connect AP again in STAMlmePeriodicExec
-	pAdapter->MlmeAux.AutoReconnectSsidLen= 32;
-
-    memset(Bssid, 0, MAC_ADDR_LEN);
-    memcpy(Bssid, ap_addr->sa_data, MAC_ADDR_LEN);
-    MlmeEnqueue(pAdapter,
-                MLME_CNTL_STATE_MACHINE,
-                OID_802_11_BSSID,
-                sizeof(NDIS_802_11_MAC_ADDRESS),
-                (VOID *)&Bssid);
-
-    DBGPRINT(RT_DEBUG_TRACE, ("IOCTL::SIOCSIWAP %02x:%02x:%02x:%02x:%02x:%02x\n",
-        Bssid[0], Bssid[1], Bssid[2], Bssid[3], Bssid[4], Bssid[5]));
-
-	return 0;
-}
-
-int rt_ioctl_giwap(struct net_device *dev,
-		      struct iw_request_info *info,
-		      struct sockaddr *ap_addr, char *extra)
-{
-	PRTMP_ADAPTER 	pAdapter = NULL;
-	VIRTUAL_ADAPTER *pVirtualAd = NULL;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->ml_priv;
-	}
-	else
-	{
-		pVirtualAd = dev->ml_priv;
-		if (pVirtualAd && pVirtualAd->RtmpDev)
-			pAdapter = pVirtualAd->RtmpDev->ml_priv;
-	}
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->ml_priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-	if (INFRA_ON(pAdapter) || ADHOC_ON(pAdapter))
-	{
-		ap_addr->sa_family = ARPHRD_ETHER;
-		memcpy(ap_addr->sa_data, &pAdapter->CommonCfg.Bssid, ETH_ALEN);
-	}
-#ifdef WPA_SUPPLICANT_SUPPORT
-    // Add for RT2870
-    else if (pAdapter->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
-    {
-        ap_addr->sa_family = ARPHRD_ETHER;
-        memcpy(ap_addr->sa_data, &pAdapter->MlmeAux.Bssid, ETH_ALEN);
-    }
-#endif // WPA_SUPPLICANT_SUPPORT //
-	else
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("IOCTL::SIOCGIWAP(=EMPTY)\n"));
-		return -ENOTCONN;
-	}
-
-	return 0;
-}
-
-/*
- * Units are in db above the noise floor. That means the
- * rssi values reported in the tx/rx descriptors in the
- * driver are the SNR expressed in db.
- *
- * If you assume that the noise floor is -95, which is an
- * excellent assumption 99.5 % of the time, then you can
- * derive the absolute signal level (i.e. -95 + rssi).
- * There are some other slight factors to take into account
- * depending on whether the rssi measurement is from 11b,
- * 11g, or 11a.   These differences are at most 2db and
- * can be documented.
- *
- * NB: various calculations are based on the orinoco/wavelan
- *     drivers for compatibility
- */
-static void set_quality(PRTMP_ADAPTER pAdapter,
-                        struct iw_quality *iq,
-                        signed char rssi)
-{
-	__u8 ChannelQuality;
-
-	// Normalize Rssi
-	if (rssi >= -50)
-		ChannelQuality = 100;
-	else if (rssi >= -80) // between -50 ~ -80dbm
-		ChannelQuality = (__u8)(24 + ((rssi + 80) * 26)/10);
-	else if (rssi >= -90)   // between -80 ~ -90dbm
-        ChannelQuality = (__u8)((rssi + 90) * 26)/10;
-	else
-		ChannelQuality = 0;
-
-    iq->qual = (__u8)ChannelQuality;
-
-    iq->level = (__u8)(rssi);
-    iq->noise = (pAdapter->BbpWriteLatch[66] > pAdapter->BbpTuning.FalseCcaUpperThreshold) ? ((__u8)pAdapter->BbpTuning.FalseCcaUpperThreshold) : ((__u8) pAdapter->BbpWriteLatch[66]); 	// noise level (dBm)
-    iq->noise += 256 - 143;
-    iq->updated = pAdapter->iw_stats.qual.updated;
-}
-
-int rt_ioctl_iwaplist(struct net_device *dev,
-			struct iw_request_info *info,
-			struct iw_point *data, char *extra)
-{
- 	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
-	struct sockaddr addr[IW_MAX_AP];
-	struct iw_quality qual[IW_MAX_AP];
-	int i;
-
-   	//check if the interface is down
-    if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-       	DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-		data->length = 0;
-		return 0;
-        //return -ENETDOWN;
-	}
-
-	for (i = 0; i <IW_MAX_AP ; i++)
-	{
-		if (i >=  pAdapter->ScanTab.BssNr)
-			break;
-		addr[i].sa_family = ARPHRD_ETHER;
-			memcpy(addr[i].sa_data, &pAdapter->ScanTab.BssEntry[i].Bssid, MAC_ADDR_LEN);
-		set_quality(pAdapter, &qual[i], pAdapter->ScanTab.BssEntry[i].Rssi);
-	}
-	data->length = i;
-	memcpy(extra, &addr, i*sizeof(addr[0]));
-	data->flags = 1;		/* signal quality present (sort of) */
-	memcpy(extra + i*sizeof(addr[0]), &qual, i*sizeof(qual[i]));
-
-	return 0;
-}
-
-#ifdef SIOCGIWSCAN
-int rt_ioctl_siwscan(struct net_device *dev,
-			struct iw_request_info *info,
-			struct iw_point *data, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
-	ULONG								Now;
-	int Status = NDIS_STATUS_SUCCESS;
-
-	//check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-		return -ENETDOWN;
-	}
-
-	if (MONITOR_ON(pAdapter))
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("!!! Driver is in Monitor Mode now !!!\n"));
-        return -EINVAL;
-    }
-
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-	if (pAdapter->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE)
-	{
-		pAdapter->StaCfg.WpaSupplicantScanCount++;
-	}
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-    pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE;
-	if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-		return 0;
-	do{
-		Now = jiffies;
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-		if ((pAdapter->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE) &&
-			(pAdapter->StaCfg.WpaSupplicantScanCount > 3))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("!!! WpaSupplicantScanCount > 3\n"));
-			Status = NDIS_STATUS_SUCCESS;
-			break;
-		}
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-		if ((OPSTATUS_TEST_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED)) &&
-			((pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA) ||
-			(pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK)) &&
-			(pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("!!! Link UP, Port Not Secured! ignore this set::OID_802_11_BSSID_LIST_SCAN\n"));
-			Status = NDIS_STATUS_SUCCESS;
-			break;
-		}
-
-		if (pAdapter->Mlme.CntlMachine.CurrState != CNTL_IDLE)
-		{
-			RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-			DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
-		}
-
-		// tell CNTL state machine to call NdisMSetInformationComplete() after completing
-		// this request, because this request is initiated by NDIS.
-		pAdapter->MlmeAux.CurrReqIsFromNdis = FALSE;
-		// Reset allowed scan retries
-		pAdapter->StaCfg.ScanCnt = 0;
-		pAdapter->StaCfg.LastScanTime = Now;
-
-		MlmeEnqueue(pAdapter,
-			MLME_CNTL_STATE_MACHINE,
-			OID_802_11_BSSID_LIST_SCAN,
-			0,
-			NULL);
-
-		Status = NDIS_STATUS_SUCCESS;
-		RT28XX_MLME_HANDLER(pAdapter);
-	}while(0);
-	return 0;
-}
-
-int rt_ioctl_giwscan(struct net_device *dev,
-			struct iw_request_info *info,
-			struct iw_point *data, char *extra)
-{
-
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-	int i=0;
-	char *current_ev = extra, *previous_ev = extra;
-	char *end_buf;
-	char *current_val, custom[MAX_CUSTOM_LEN] = {0};
-#ifndef IWEVGENIE
-	char idx;
-#endif // IWEVGENIE //
-	struct iw_event iwe;
-
-	if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-    {
-		/*
-		 * Still scanning, indicate the caller should try again.
-		 */
-		return -EAGAIN;
-	}
-
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-	if (pAdapter->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE)
-	{
-		pAdapter->StaCfg.WpaSupplicantScanCount = 0;
-	}
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-	if (pAdapter->ScanTab.BssNr == 0)
-	{
-		data->length = 0;
-		return 0;
-	}
-
-#if WIRELESS_EXT >= 17
-    if (data->length > 0)
-        end_buf = extra + data->length;
-    else
-        end_buf = extra + IW_SCAN_MAX_DATA;
-#else
-    end_buf = extra + IW_SCAN_MAX_DATA;
-#endif
-
-	for (i = 0; i < pAdapter->ScanTab.BssNr; i++)
-	{
-		if (current_ev >= end_buf)
-        {
-#if WIRELESS_EXT >= 17
-            return -E2BIG;
-#else
-			break;
-#endif
-        }
-
-		//MAC address
-		//================================
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = SIOCGIWAP;
-		iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
-				memcpy(iwe.u.ap_addr.sa_data, &pAdapter->ScanTab.BssEntry[i].Bssid, ETH_ALEN);
-
-        previous_ev = current_ev;
-		current_ev = IWE_STREAM_ADD_EVENT(info, current_ev,end_buf, &iwe, IW_EV_ADDR_LEN);
-        if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-            return -E2BIG;
-#else
-			break;
-#endif
-
-		//ESSID
-		//================================
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = SIOCGIWESSID;
-		iwe.u.data.length = pAdapter->ScanTab.BssEntry[i].SsidLen;
-		iwe.u.data.flags = 1;
-
-        previous_ev = current_ev;
-		current_ev = IWE_STREAM_ADD_POINT(info, current_ev,end_buf, &iwe, pAdapter->ScanTab.BssEntry[i].Ssid);
-        if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-            return -E2BIG;
-#else
-			break;
-#endif
-
-		//Network Type
-		//================================
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = SIOCGIWMODE;
-		if (pAdapter->ScanTab.BssEntry[i].BssType == Ndis802_11IBSS)
-		{
-			iwe.u.mode = IW_MODE_ADHOC;
-		}
-		else if (pAdapter->ScanTab.BssEntry[i].BssType == Ndis802_11Infrastructure)
-		{
-			iwe.u.mode = IW_MODE_INFRA;
-		}
-		else
-		{
-			iwe.u.mode = IW_MODE_AUTO;
-		}
-		iwe.len = IW_EV_UINT_LEN;
-
-        previous_ev = current_ev;
-		current_ev = IWE_STREAM_ADD_EVENT(info, current_ev, end_buf, &iwe,  IW_EV_UINT_LEN);
-        if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-            return -E2BIG;
-#else
-			break;
-#endif
-
-		//Channel and Frequency
-		//================================
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = SIOCGIWFREQ;
-		if (INFRA_ON(pAdapter) || ADHOC_ON(pAdapter))
-			iwe.u.freq.m = pAdapter->ScanTab.BssEntry[i].Channel;
-		else
-			iwe.u.freq.m = pAdapter->ScanTab.BssEntry[i].Channel;
-		iwe.u.freq.e = 0;
-		iwe.u.freq.i = 0;
-
-		previous_ev = current_ev;
-		current_ev = IWE_STREAM_ADD_EVENT(info, current_ev,end_buf, &iwe, IW_EV_FREQ_LEN);
-        if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-            return -E2BIG;
-#else
-			break;
-#endif
-
-        //Add quality statistics
-        //================================
-        memset(&iwe, 0, sizeof(iwe));
-    	iwe.cmd = IWEVQUAL;
-    	iwe.u.qual.level = 0;
-    	iwe.u.qual.noise = 0;
-        set_quality(pAdapter, &iwe.u.qual, pAdapter->ScanTab.BssEntry[i].Rssi);
-    	current_ev = IWE_STREAM_ADD_EVENT(info, current_ev, end_buf, &iwe, IW_EV_QUAL_LEN);
-        if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-            return -E2BIG;
-#else
-			break;
-#endif
-
-		//Encyption key
-		//================================
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = SIOCGIWENCODE;
-		if (CAP_IS_PRIVACY_ON (pAdapter->ScanTab.BssEntry[i].CapabilityInfo ))
-			iwe.u.data.flags =IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
-		else
-			iwe.u.data.flags = IW_ENCODE_DISABLED;
-
-        previous_ev = current_ev;
-        current_ev = IWE_STREAM_ADD_POINT(info, current_ev, end_buf,&iwe, (char *)pAdapter->SharedKey[BSS0][(iwe.u.data.flags & IW_ENCODE_INDEX)-1].Key);
-        if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-            return -E2BIG;
-#else
-			break;
-#endif
-
-		//Bit Rate
-		//================================
-		if (pAdapter->ScanTab.BssEntry[i].SupRateLen)
-        {
-            UCHAR tmpRate = pAdapter->ScanTab.BssEntry[i].SupRate[pAdapter->ScanTab.BssEntry[i].SupRateLen-1];
-			memset(&iwe, 0, sizeof(iwe));
-			iwe.cmd = SIOCGIWRATE;
-    		current_val = current_ev + IW_EV_LCP_LEN;
-            if (tmpRate == 0x82)
-                iwe.u.bitrate.value =  1 * 1000000;
-            else if (tmpRate == 0x84)
-                iwe.u.bitrate.value =  2 * 1000000;
-            else if (tmpRate == 0x8B)
-                iwe.u.bitrate.value =  5.5 * 1000000;
-            else if (tmpRate == 0x96)
-                iwe.u.bitrate.value =  11 * 1000000;
-            else
-    		    iwe.u.bitrate.value =  (tmpRate/2) * 1000000;
-
-			iwe.u.bitrate.disabled = 0;
-			current_val = IWE_STREAM_ADD_VALUE(info, current_ev,
-				current_val, end_buf, &iwe,
-    			IW_EV_PARAM_LEN);
-
-        	if((current_val-current_ev)>IW_EV_LCP_LEN)
-            	current_ev = current_val;
-        	else
-#if WIRELESS_EXT >= 17
-                return -E2BIG;
-#else
-			    break;
-#endif
-        }
-
-#ifdef IWEVGENIE
-		//WPA IE
-		if (pAdapter->ScanTab.BssEntry[i].WpaIE.IELen > 0)
-		{
-			memset(&iwe, 0, sizeof(iwe));
-			memset(&custom[0], 0, MAX_CUSTOM_LEN);
-			memcpy(custom, &(pAdapter->ScanTab.BssEntry[i].WpaIE.IE[0]),
-						   pAdapter->ScanTab.BssEntry[i].WpaIE.IELen);
-			iwe.cmd = IWEVGENIE;
-			iwe.u.data.length = pAdapter->ScanTab.BssEntry[i].WpaIE.IELen;
-			current_ev = IWE_STREAM_ADD_POINT(info, current_ev, end_buf, &iwe, custom);
-			if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-                return -E2BIG;
-#else
-			    break;
-#endif
-		}
-
-		//WPA2 IE
-        if (pAdapter->ScanTab.BssEntry[i].RsnIE.IELen > 0)
-        {
-        	memset(&iwe, 0, sizeof(iwe));
-			memset(&custom[0], 0, MAX_CUSTOM_LEN);
-			memcpy(custom, &(pAdapter->ScanTab.BssEntry[i].RsnIE.IE[0]),
-						   pAdapter->ScanTab.BssEntry[i].RsnIE.IELen);
-			iwe.cmd = IWEVGENIE;
-			iwe.u.data.length = pAdapter->ScanTab.BssEntry[i].RsnIE.IELen;
-			current_ev = IWE_STREAM_ADD_POINT(info, current_ev, end_buf, &iwe, custom);
-			if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-                return -E2BIG;
-#else
-			    break;
-#endif
-        }
-#else
-        //WPA IE
-		//================================
-        if (pAdapter->ScanTab.BssEntry[i].WpaIE.IELen > 0)
-        {
-    		NdisZeroMemory(&iwe, sizeof(iwe));
-			memset(&custom[0], 0, MAX_CUSTOM_LEN);
-    		iwe.cmd = IWEVCUSTOM;
-            iwe.u.data.length = (pAdapter->ScanTab.BssEntry[i].WpaIE.IELen * 2) + 7;
-            NdisMoveMemory(custom, "wpa_ie=", 7);
-            for (idx = 0; idx < pAdapter->ScanTab.BssEntry[i].WpaIE.IELen; idx++)
-                sprintf(custom, "%s%02x", custom, pAdapter->ScanTab.BssEntry[i].WpaIE.IE[idx]);
-            previous_ev = current_ev;
-    		current_ev = IWE_STREAM_ADD_POINT(info, current_ev, end_buf, &iwe,  custom);
-            if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-                return -E2BIG;
-#else
-			    break;
-#endif
-        }
-
-        //WPA2 IE
-        if (pAdapter->ScanTab.BssEntry[i].RsnIE.IELen > 0)
-        {
-    		NdisZeroMemory(&iwe, sizeof(iwe));
-			memset(&custom[0], 0, MAX_CUSTOM_LEN);
-    		iwe.cmd = IWEVCUSTOM;
-            iwe.u.data.length = (pAdapter->ScanTab.BssEntry[i].RsnIE.IELen * 2) + 7;
-            NdisMoveMemory(custom, "rsn_ie=", 7);
-			for (idx = 0; idx < pAdapter->ScanTab.BssEntry[i].RsnIE.IELen; idx++)
-                sprintf(custom, "%s%02x", custom, pAdapter->ScanTab.BssEntry[i].RsnIE.IE[idx]);
-            previous_ev = current_ev;
-    		current_ev = IWE_STREAM_ADD_POINT(info, current_ev, end_buf, &iwe,  custom);
-            if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-                return -E2BIG;
-#else
-			    break;
-#endif
-        }
-#endif // IWEVGENIE //
-	}
-
-	data->length = current_ev - extra;
-    pAdapter->StaCfg.bScanReqIsFromWebUI = FALSE;
-	DBGPRINT(RT_DEBUG_ERROR ,("===>rt_ioctl_giwscan. %d(%d) BSS returned, data->length = %d\n",i , pAdapter->ScanTab.BssNr, data->length));
-	return 0;
-}
-#endif
-
-int rt_ioctl_siwessid(struct net_device *dev,
-			 struct iw_request_info *info,
-			 struct iw_point *data, char *essid)
-{
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
-	//check if the interface is down
-    if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-       	DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-       	return -ENETDOWN;
-    }
-
-	if (data->flags)
-	{
-		PCHAR	pSsidString = NULL;
-
-		// Includes null character.
-		if (data->length > (IW_ESSID_MAX_SIZE + 1))
-			return -E2BIG;
-
-		pSsidString = (CHAR *) kmalloc(MAX_LEN_OF_SSID+1, MEM_ALLOC_FLAG);
-		if (pSsidString)
-		{
-			NdisZeroMemory(pSsidString, MAX_LEN_OF_SSID+1);
-			NdisMoveMemory(pSsidString, essid, data->length);
-			if (Set_SSID_Proc(pAdapter, pSsidString) == FALSE)
-				return -EINVAL;
-		}
-		else
-			return -ENOMEM;
-	}
-	else
-	{
-		// ANY ssid
-		if (Set_SSID_Proc(pAdapter, "") == FALSE)
-			return -EINVAL;
-    }
-	return 0;
-}
-
-int rt_ioctl_giwessid(struct net_device *dev,
-			 struct iw_request_info *info,
-			 struct iw_point *data, char *essid)
-{
-	PRTMP_ADAPTER 	pAdapter = NULL;
-	VIRTUAL_ADAPTER *pVirtualAd = NULL;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->ml_priv;
-	}
-	else
-	{
-		pVirtualAd = dev->ml_priv;
-		if (pVirtualAd && pVirtualAd->RtmpDev)
-			pAdapter = pVirtualAd->RtmpDev->ml_priv;
-	}
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->ml_priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-	data->flags = 1;
-    if (MONITOR_ON(pAdapter))
-    {
-        data->length  = 0;
-        return 0;
-    }
-
-	if (OPSTATUS_TEST_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED))
-	{
-		DBGPRINT(RT_DEBUG_TRACE ,("MediaState is connected\n"));
-		data->length = pAdapter->CommonCfg.SsidLen;
-		memcpy(essid, pAdapter->CommonCfg.Ssid, pAdapter->CommonCfg.SsidLen);
-	}
-#ifdef RT2870
-#ifdef WPA_SUPPLICANT_SUPPORT
-    // Add for RT2870
-    else if (pAdapter->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
-    {
-        data->length = pAdapter->CommonCfg.SsidLen;
-		memcpy(essid, pAdapter->CommonCfg.Ssid, pAdapter->CommonCfg.SsidLen);
-	}
-#endif // WPA_SUPPLICANT_SUPPORT //
-#endif // RT2870 //
-	else
-	{//the ANY ssid was specified
-		data->length  = 0;
-		DBGPRINT(RT_DEBUG_TRACE ,("MediaState is not connected, ess\n"));
-	}
-
-	return 0;
-
-}
-
-int rt_ioctl_siwnickn(struct net_device *dev,
-			 struct iw_request_info *info,
-			 struct iw_point *data, char *nickname)
-{
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
-    //check if the interface is down
-    if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-        DBGPRINT(RT_DEBUG_TRACE ,("INFO::Network is down!\n"));
-        return -ENETDOWN;
-    }
-
-	if (data->length > IW_ESSID_MAX_SIZE)
-		return -EINVAL;
-
-	memset(pAdapter->nickname, 0, IW_ESSID_MAX_SIZE + 1);
-	memcpy(pAdapter->nickname, nickname, data->length);
-
-
-	return 0;
-}
-
-int rt_ioctl_giwnickn(struct net_device *dev,
-			 struct iw_request_info *info,
-			 struct iw_point *data, char *nickname)
-{
-	PRTMP_ADAPTER 	pAdapter = NULL;
-	VIRTUAL_ADAPTER *pVirtualAd = NULL;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->ml_priv;
-	}
-	else
-	{
-		pVirtualAd = dev->ml_priv;
-		if (pVirtualAd && pVirtualAd->RtmpDev)
-			pAdapter = pVirtualAd->RtmpDev->ml_priv;
-	}
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->ml_priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-	if (data->length > strlen(pAdapter->nickname) + 1)
-		data->length = strlen(pAdapter->nickname) + 1;
-	if (data->length > 0) {
-		memcpy(nickname, pAdapter->nickname, data->length-1);
-		nickname[data->length-1] = '\0';
-	}
-	return 0;
-}
-
-int rt_ioctl_siwrts(struct net_device *dev,
-		       struct iw_request_info *info,
-		       struct iw_param *rts, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-	u16 val;
-
-    //check if the interface is down
-    if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-        return -ENETDOWN;
-    }
-
-	if (rts->disabled)
-		val = MAX_RTS_THRESHOLD;
-	else if (rts->value < 0 || rts->value > MAX_RTS_THRESHOLD)
-		return -EINVAL;
-	else if (rts->value == 0)
-	    val = MAX_RTS_THRESHOLD;
-	else
-		val = rts->value;
-
-	if (val != pAdapter->CommonCfg.RtsThreshold)
-		pAdapter->CommonCfg.RtsThreshold = val;
-
-	return 0;
-}
-
-int rt_ioctl_giwrts(struct net_device *dev,
-		       struct iw_request_info *info,
-		       struct iw_param *rts, char *extra)
-{
-	PRTMP_ADAPTER 	pAdapter = NULL;
-	VIRTUAL_ADAPTER *pVirtualAd = NULL;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->ml_priv;
-	}
-	else
-	{
-		pVirtualAd = dev->ml_priv;
-		if (pVirtualAd && pVirtualAd->RtmpDev)
-			pAdapter = pVirtualAd->RtmpDev->ml_priv;
-	}
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->ml_priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-	//check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-  		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-    	return -ENETDOWN;
-	}
-
-	rts->value = pAdapter->CommonCfg.RtsThreshold;
-	rts->disabled = (rts->value == MAX_RTS_THRESHOLD);
-	rts->fixed = 1;
-
-	return 0;
-}
-
-int rt_ioctl_siwfrag(struct net_device *dev,
-			struct iw_request_info *info,
-			struct iw_param *frag, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-	u16 val;
-
-	//check if the interface is down
-    	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    	{
-      		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-        	return -ENETDOWN;
-    	}
-
-	if (frag->disabled)
-		val = MAX_FRAG_THRESHOLD;
-	else if (frag->value >= MIN_FRAG_THRESHOLD || frag->value <= MAX_FRAG_THRESHOLD)
-        val = __cpu_to_le16(frag->value & ~0x1); /* even numbers only */
-	else if (frag->value == 0)
-	    val = MAX_FRAG_THRESHOLD;
-	else
-		return -EINVAL;
-
-	pAdapter->CommonCfg.FragmentThreshold = val;
-	return 0;
-}
-
-int rt_ioctl_giwfrag(struct net_device *dev,
-			struct iw_request_info *info,
-			struct iw_param *frag, char *extra)
-{
-	PRTMP_ADAPTER 	pAdapter = NULL;
-	VIRTUAL_ADAPTER *pVirtualAd = NULL;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->ml_priv;
-	}
-	else
-	{
-		pVirtualAd = dev->ml_priv;
-		if (pVirtualAd && pVirtualAd->RtmpDev)
-			pAdapter = pVirtualAd->RtmpDev->ml_priv;
-	}
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->ml_priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-	//check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-  		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-    	return -ENETDOWN;
-	}
-
-	frag->value = pAdapter->CommonCfg.FragmentThreshold;
-	frag->disabled = (frag->value == MAX_FRAG_THRESHOLD);
-	frag->fixed = 1;
-
-	return 0;
-}
-
-#define MAX_WEP_KEY_SIZE 13
-#define MIN_WEP_KEY_SIZE 5
-int rt_ioctl_siwencode(struct net_device *dev,
-			  struct iw_request_info *info,
-			  struct iw_point *erq, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
-	//check if the interface is down
-    	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    	{
-      		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-        	return -ENETDOWN;
-    	}
-
-	if ((erq->length == 0) &&
-        (erq->flags & IW_ENCODE_DISABLED))
-	{
-		pAdapter->StaCfg.PairCipher = Ndis802_11WEPDisabled;
-		pAdapter->StaCfg.GroupCipher = Ndis802_11WEPDisabled;
-		pAdapter->StaCfg.WepStatus = Ndis802_11WEPDisabled;
-        pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
-        goto done;
-	}
-	else if ((erq->length == 0) &&
-             (erq->flags & IW_ENCODE_RESTRICTED || erq->flags & IW_ENCODE_OPEN))
-	{
-	    //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-		STA_PORT_SECURED(pAdapter);
-		pAdapter->StaCfg.PairCipher = Ndis802_11WEPEnabled;
-		pAdapter->StaCfg.GroupCipher = Ndis802_11WEPEnabled;
-		pAdapter->StaCfg.WepStatus = Ndis802_11WEPEnabled;
-        pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-		if (erq->flags & IW_ENCODE_RESTRICTED)
-			pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeShared;
-    	else
-			pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
-        goto done;
-	}
-
-    if (erq->length > 0)
-	{
-		int keyIdx = (erq->flags & IW_ENCODE_INDEX) - 1;
-		/* Check the size of the key */
-		if (erq->length > MAX_WEP_KEY_SIZE) {
-			return -EINVAL;
-		}
-		/* Check key index */
-		if ((keyIdx < 0) || (keyIdx >= NR_WEP_KEYS))
-        {
-            DBGPRINT(RT_DEBUG_TRACE ,("==>rt_ioctl_siwencode::Wrong keyIdx=%d! Using default key instead (%d)\n",
-                                        keyIdx, pAdapter->StaCfg.DefaultKeyId));
-
-            //Using default key
-			keyIdx = pAdapter->StaCfg.DefaultKeyId;
-        }
-
-        NdisZeroMemory(pAdapter->SharedKey[BSS0][keyIdx].Key,  16);
-
-		if (erq->length == MAX_WEP_KEY_SIZE)
-        {
-			pAdapter->SharedKey[BSS0][keyIdx].KeyLen = MAX_WEP_KEY_SIZE;
-            pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CIPHER_WEP128;
-		}
-		else if (erq->length == MIN_WEP_KEY_SIZE)
-        {
-            pAdapter->SharedKey[BSS0][keyIdx].KeyLen = MIN_WEP_KEY_SIZE;
-            pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CIPHER_WEP64;
-		}
-		else
-			/* Disable the key */
-			pAdapter->SharedKey[BSS0][keyIdx].KeyLen = 0;
-
-		/* Check if the key is not marked as invalid */
-		if(!(erq->flags & IW_ENCODE_NOKEY)) {
-			/* Copy the key in the driver */
-			NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, extra, erq->length);
-        }
-	}
-    else
-			{
-		/* Do we want to just set the transmit key index ? */
-		int index = (erq->flags & IW_ENCODE_INDEX) - 1;
-		if ((index >= 0) && (index < 4))
-        {
-			pAdapter->StaCfg.DefaultKeyId = index;
-            }
-        else
-			/* Don't complain if only change the mode */
-			if (!(erq->flags & IW_ENCODE_MODE)) {
-				return -EINVAL;
-		}
-	}
-
-done:
-    DBGPRINT(RT_DEBUG_TRACE ,("==>rt_ioctl_siwencode::erq->flags=%x\n",erq->flags));
-	DBGPRINT(RT_DEBUG_TRACE ,("==>rt_ioctl_siwencode::AuthMode=%x\n",pAdapter->StaCfg.AuthMode));
-	DBGPRINT(RT_DEBUG_TRACE ,("==>rt_ioctl_siwencode::DefaultKeyId=%x, KeyLen = %d\n",pAdapter->StaCfg.DefaultKeyId , pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen));
-	DBGPRINT(RT_DEBUG_TRACE ,("==>rt_ioctl_siwencode::WepStatus=%x\n",pAdapter->StaCfg.WepStatus));
-	return 0;
-}
-
-int
-rt_ioctl_giwencode(struct net_device *dev,
-			  struct iw_request_info *info,
-			  struct iw_point *erq, char *key)
-{
-	int kid;
-	PRTMP_ADAPTER 	pAdapter = NULL;
-	VIRTUAL_ADAPTER *pVirtualAd = NULL;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->ml_priv;
-	}
-	else
-	{
-		pVirtualAd = dev->ml_priv;
-		if (pVirtualAd && pVirtualAd->RtmpDev)
-			pAdapter = pVirtualAd->RtmpDev->ml_priv;
-	}
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->ml_priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-	//check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-  		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-    	return -ENETDOWN;
-	}
-
-	kid = erq->flags & IW_ENCODE_INDEX;
-	DBGPRINT(RT_DEBUG_TRACE, ("===>rt_ioctl_giwencode %d\n", erq->flags & IW_ENCODE_INDEX));
-
-	if (pAdapter->StaCfg.WepStatus == Ndis802_11WEPDisabled)
-	{
-		erq->length = 0;
-		erq->flags = IW_ENCODE_DISABLED;
-	}
-	else if ((kid > 0) && (kid <=4))
-	{
-		// copy wep key
-		erq->flags = kid ;			/* NB: base 1 */
-		if (erq->length > pAdapter->SharedKey[BSS0][kid-1].KeyLen)
-			erq->length = pAdapter->SharedKey[BSS0][kid-1].KeyLen;
-		memcpy(key, pAdapter->SharedKey[BSS0][kid-1].Key, erq->length);
-		//if ((kid == pAdapter->PortCfg.DefaultKeyId))
-		//erq->flags |= IW_ENCODE_ENABLED;	/* XXX */
-		if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeShared)
-			erq->flags |= IW_ENCODE_RESTRICTED;		/* XXX */
-		else
-			erq->flags |= IW_ENCODE_OPEN;		/* XXX */
-
-	}
-	else if (kid == 0)
-	{
-		if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeShared)
-			erq->flags |= IW_ENCODE_RESTRICTED;		/* XXX */
-		else
-			erq->flags |= IW_ENCODE_OPEN;		/* XXX */
-		erq->length = pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen;
-		memcpy(key, pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].Key, erq->length);
-		// copy default key ID
-		if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeShared)
-			erq->flags |= IW_ENCODE_RESTRICTED;		/* XXX */
-		else
-			erq->flags |= IW_ENCODE_OPEN;		/* XXX */
-		erq->flags = pAdapter->StaCfg.DefaultKeyId + 1;			/* NB: base 1 */
-		erq->flags |= IW_ENCODE_ENABLED;	/* XXX */
-	}
-
-	return 0;
-
-}
-
-static int
-rt_ioctl_setparam(struct net_device *dev, struct iw_request_info *info,
-			 void *w, char *extra)
-{
-    VIRTUAL_ADAPTER	*pVirtualAd = NULL;
-	PRTMP_ADAPTER pAdapter;
-	POS_COOKIE pObj;
-	char *this_char = extra;
-	char *value;
-	int  Status=0;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->ml_priv;
-	}
-	else
-	{
-		pVirtualAd = dev->ml_priv;
-		pAdapter = pVirtualAd->RtmpDev->ml_priv;
-	}
-	pObj = (POS_COOKIE) pAdapter->OS_Cookie;
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->ml_priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-	{
-		pObj->ioctl_if_type = INT_MAIN;
-        pObj->ioctl_if = MAIN_MBSSID;
-	}
-
-	//check if the interface is down
-    	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    	{
-      		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-			return -ENETDOWN;
-    	}
-
-	if (!*this_char)
-		return -EINVAL;
-
-	if ((value = rtstrchr(this_char, '=')) != NULL)
-	    *value++ = 0;
-
-	if (!value)
-	    return -EINVAL;
-
-	// reject setting nothing besides ANY ssid(ssidLen=0)
-    if (!*value && (strcmp(this_char, "SSID") != 0))
-        return -EINVAL;
-
-	for (PRTMP_PRIVATE_SET_PROC = RTMP_PRIVATE_SUPPORT_PROC; PRTMP_PRIVATE_SET_PROC->name; PRTMP_PRIVATE_SET_PROC++)
-	{
-	    if (strcmp(this_char, PRTMP_PRIVATE_SET_PROC->name) == 0)
-	    {
-	        if(!PRTMP_PRIVATE_SET_PROC->set_proc(pAdapter, value))
-	        {	//FALSE:Set private failed then return Invalid argument
-			    Status = -EINVAL;
-	        }
-		    break;	//Exit for loop.
-	    }
-	}
-
-	if(PRTMP_PRIVATE_SET_PROC->name == NULL)
-	{  //Not found argument
-	    Status = -EINVAL;
-	    DBGPRINT(RT_DEBUG_TRACE, ("===>rt_ioctl_setparam:: (iwpriv) Not Support Set Command [%s=%s]\n", this_char, value));
-	}
-
-    return Status;
-}
-
-
-static int
-rt_private_get_statistics(struct net_device *dev, struct iw_request_info *info,
-		struct iw_point *wrq, char *extra)
-{
-	INT				Status = 0;
-    PRTMP_ADAPTER   pAd = dev->ml_priv;
-
-    if (extra == NULL)
-    {
-        wrq->length = 0;
-        return -EIO;
-    }
-
-    memset(extra, 0x00, IW_PRIV_SIZE_MASK);
-    sprintf(extra, "\n\n");
-
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-	{
-	    sprintf(extra+strlen(extra), "Tx success                      = %ld\n", (ULONG)pAd->ate.TxDoneCount);
-	    //sprintf(extra+strlen(extra), "Tx success without retry        = %ld\n", (ULONG)pAd->ate.TxDoneCount);
-	}
-	else
-#endif // RALINK_ATE //
-	{
-    sprintf(extra+strlen(extra), "Tx success                      = %ld\n", (ULONG)pAd->WlanCounters.TransmittedFragmentCount.QuadPart);
-    sprintf(extra+strlen(extra), "Tx success without retry        = %ld\n", (ULONG)pAd->WlanCounters.TransmittedFragmentCount.QuadPart - (ULONG)pAd->WlanCounters.RetryCount.QuadPart);
-	}
-    sprintf(extra+strlen(extra), "Tx success after retry          = %ld\n", (ULONG)pAd->WlanCounters.RetryCount.QuadPart);
-    sprintf(extra+strlen(extra), "Tx fail to Rcv ACK after retry  = %ld\n", (ULONG)pAd->WlanCounters.FailedCount.QuadPart);
-    sprintf(extra+strlen(extra), "RTS Success Rcv CTS             = %ld\n", (ULONG)pAd->WlanCounters.RTSSuccessCount.QuadPart);
-    sprintf(extra+strlen(extra), "RTS Fail Rcv CTS                = %ld\n", (ULONG)pAd->WlanCounters.RTSFailureCount.QuadPart);
-
-    sprintf(extra+strlen(extra), "Rx success                      = %ld\n", (ULONG)pAd->WlanCounters.ReceivedFragmentCount.QuadPart);
-    sprintf(extra+strlen(extra), "Rx with CRC                     = %ld\n", (ULONG)pAd->WlanCounters.FCSErrorCount.QuadPart);
-    sprintf(extra+strlen(extra), "Rx drop due to out of resource  = %ld\n", (ULONG)pAd->Counters8023.RxNoBuffer);
-    sprintf(extra+strlen(extra), "Rx duplicate frame              = %ld\n", (ULONG)pAd->WlanCounters.FrameDuplicateCount.QuadPart);
-
-    sprintf(extra+strlen(extra), "False CCA (one second)          = %ld\n", (ULONG)pAd->RalinkCounters.OneSecFalseCCACnt);
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-	{
-		if (pAd->ate.RxAntennaSel == 0)
-		{
-    		sprintf(extra+strlen(extra), "RSSI-A                          = %ld\n", (LONG)(pAd->ate.LastRssi0 - pAd->BbpRssiToDbmDelta));
-			sprintf(extra+strlen(extra), "RSSI-B (if available)           = %ld\n", (LONG)(pAd->ate.LastRssi1 - pAd->BbpRssiToDbmDelta));
-			sprintf(extra+strlen(extra), "RSSI-C (if available)           = %ld\n\n", (LONG)(pAd->ate.LastRssi2 - pAd->BbpRssiToDbmDelta));
-		}
-		else
-		{
-    		sprintf(extra+strlen(extra), "RSSI                            = %ld\n", (LONG)(pAd->ate.LastRssi0 - pAd->BbpRssiToDbmDelta));
-		}
-	}
-	else
-#endif // RALINK_ATE //
-	{
-    	sprintf(extra+strlen(extra), "RSSI-A                          = %ld\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi0 - pAd->BbpRssiToDbmDelta));
-        sprintf(extra+strlen(extra), "RSSI-B (if available)           = %ld\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi1 - pAd->BbpRssiToDbmDelta));
-        sprintf(extra+strlen(extra), "RSSI-C (if available)           = %ld\n\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi2 - pAd->BbpRssiToDbmDelta));
-	}
-#ifdef WPA_SUPPLICANT_SUPPORT
-    sprintf(extra+strlen(extra), "WpaSupplicantUP                 = %d\n\n", pAd->StaCfg.WpaSupplicantUP);
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-
-    wrq->length = strlen(extra) + 1; // 1: size of '\0'
-    DBGPRINT(RT_DEBUG_TRACE, ("<== rt_private_get_statistics, wrq->length = %d\n", wrq->length));
-
-    return Status;
-}
-
-#ifdef DOT11_N_SUPPORT
-void	getBaInfo(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pOutBuf)
-{
-	INT i, j;
-	BA_ORI_ENTRY *pOriBAEntry;
-	BA_REC_ENTRY *pRecBAEntry;
-
-	for (i=0; i<MAX_LEN_OF_MAC_TABLE; i++)
-	{
-		PMAC_TABLE_ENTRY pEntry = &pAd->MacTab.Content[i];
-		if (((pEntry->ValidAsCLI || pEntry->ValidAsApCli) && (pEntry->Sst == SST_ASSOC))
-			|| (pEntry->ValidAsWDS) || (pEntry->ValidAsMesh))
-		{
-			sprintf(pOutBuf, "%s\n%02X:%02X:%02X:%02X:%02X:%02X (Aid = %d) (AP) -\n",
-                pOutBuf,
-				pEntry->Addr[0], pEntry->Addr[1], pEntry->Addr[2],
-				pEntry->Addr[3], pEntry->Addr[4], pEntry->Addr[5], pEntry->Aid);
-
-			sprintf(pOutBuf, "%s[Recipient]\n", pOutBuf);
-			for (j=0; j < NUM_OF_TID; j++)
-			{
-				if (pEntry->BARecWcidArray[j] != 0)
-				{
-					pRecBAEntry =&pAd->BATable.BARecEntry[pEntry->BARecWcidArray[j]];
-					sprintf(pOutBuf, "%sTID=%d, BAWinSize=%d, LastIndSeq=%d, ReorderingPkts=%d\n", pOutBuf, j, pRecBAEntry->BAWinSize, pRecBAEntry->LastIndSeq, pRecBAEntry->list.qlen);
-				}
-			}
-			sprintf(pOutBuf, "%s\n", pOutBuf);
-
-			sprintf(pOutBuf, "%s[Originator]\n", pOutBuf);
-			for (j=0; j < NUM_OF_TID; j++)
-			{
-				if (pEntry->BAOriWcidArray[j] != 0)
-				{
-					pOriBAEntry =&pAd->BATable.BAOriEntry[pEntry->BAOriWcidArray[j]];
-					sprintf(pOutBuf, "%sTID=%d, BAWinSize=%d, StartSeq=%d, CurTxSeq=%d\n", pOutBuf, j, pOriBAEntry->BAWinSize, pOriBAEntry->Sequence, pEntry->TxSeq[j]);
-				}
-			}
-			sprintf(pOutBuf, "%s\n\n", pOutBuf);
-		}
-        if (strlen(pOutBuf) > (IW_PRIV_SIZE_MASK - 30))
-                break;
-	}
-
-	return;
-}
-#endif // DOT11_N_SUPPORT //
-
-static int
-rt_private_show(struct net_device *dev, struct iw_request_info *info,
-		struct iw_point *wrq, char *extra)
-{
-    INT				Status = 0;
-    VIRTUAL_ADAPTER	*pVirtualAd = NULL;
-    PRTMP_ADAPTER   pAd;
-	POS_COOKIE		pObj;
-    u32             subcmd = wrq->flags;
-
-	if (dev->priv_flags == INT_MAIN)
-		pAd = dev->ml_priv;
-	else
-	{
-		pVirtualAd = dev->ml_priv;
-		pAd = pVirtualAd->RtmpDev->ml_priv;
-	}
-	pObj = (POS_COOKIE) pAd->OS_Cookie;
-
-	if (pAd == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->ml_priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-    if (extra == NULL)
-    {
-        wrq->length = 0;
-        return -EIO;
-    }
-    memset(extra, 0x00, IW_PRIV_SIZE_MASK);
-
-	{
-		pObj->ioctl_if_type = INT_MAIN;
-        pObj->ioctl_if = MAIN_MBSSID;
-	}
-
-    switch(subcmd)
-    {
-
-        case SHOW_CONN_STATUS:
-            if (MONITOR_ON(pAd))
-            {
-#ifdef DOT11_N_SUPPORT
-                if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED &&
-                    pAd->CommonCfg.RegTransmitSetting.field.BW)
-                    sprintf(extra, "Monitor Mode(CentralChannel %d)\n", pAd->CommonCfg.CentralChannel);
-                else
-#endif // DOT11_N_SUPPORT //
-                    sprintf(extra, "Monitor Mode(Channel %d)\n", pAd->CommonCfg.Channel);
-            }
-            else
-            {
-                if (pAd->IndicateMediaState == NdisMediaStateConnected)
-            	{
-            	    if (INFRA_ON(pAd))
-                    {
-                    sprintf(extra, "Connected(AP: %s[%02X:%02X:%02X:%02X:%02X:%02X])\n",
-                                    pAd->CommonCfg.Ssid,
-                                    pAd->CommonCfg.Bssid[0],
-                                    pAd->CommonCfg.Bssid[1],
-                                    pAd->CommonCfg.Bssid[2],
-                                    pAd->CommonCfg.Bssid[3],
-                                    pAd->CommonCfg.Bssid[4],
-                                    pAd->CommonCfg.Bssid[5]);
-            		DBGPRINT(RT_DEBUG_TRACE ,("Ssid=%s ,Ssidlen = %d\n",pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen));
-            	}
-                    else if (ADHOC_ON(pAd))
-                        sprintf(extra, "Connected\n");
-            	}
-            	else
-            	{
-            	    sprintf(extra, "Disconnected\n");
-            		DBGPRINT(RT_DEBUG_TRACE ,("ConnStatus is not connected\n"));
-            	}
-            }
-            wrq->length = strlen(extra) + 1; // 1: size of '\0'
-            break;
-        case SHOW_DRVIER_VERION:
-            sprintf(extra, "Driver version-%s, %s %s\n", STA_DRIVER_VERSION, __DATE__, __TIME__ );
-            wrq->length = strlen(extra) + 1; // 1: size of '\0'
-            break;
-#ifdef DOT11_N_SUPPORT
-        case SHOW_BA_INFO:
-            getBaInfo(pAd, extra);
-            wrq->length = strlen(extra) + 1; // 1: size of '\0'
-            break;
-#endif // DOT11_N_SUPPORT //
-		case SHOW_DESC_INFO:
-			{
-				Show_DescInfo_Proc(pAd, NULL);
-				wrq->length = 0; // 1: size of '\0'
-			}
-			break;
-        case RAIO_OFF:
-            if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-            {
-                sprintf(extra, "Scanning\n");
-                wrq->length = strlen(extra) + 1; // 1: size of '\0'
-                break;
-            }
-            pAd->StaCfg.bSwRadio = FALSE;
-            if (pAd->StaCfg.bRadio != (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio))
-            {
-                pAd->StaCfg.bRadio = (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio);
-                if (pAd->StaCfg.bRadio == FALSE)
-                {
-                    MlmeRadioOff(pAd);
-                    // Update extra information
-					pAd->ExtraInfo = SW_RADIO_OFF;
-                }
-            }
-            sprintf(extra, "Radio Off\n");
-            wrq->length = strlen(extra) + 1; // 1: size of '\0'
-            break;
-        case RAIO_ON:
-            if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-            {
-                sprintf(extra, "Scanning\n");
-                wrq->length = strlen(extra) + 1; // 1: size of '\0'
-                break;
-            }
-            pAd->StaCfg.bSwRadio = TRUE;
-            //if (pAd->StaCfg.bRadio != (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio))
-            {
-                pAd->StaCfg.bRadio = (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio);
-                if (pAd->StaCfg.bRadio == TRUE)
-                {
-                    MlmeRadioOn(pAd);
-                    // Update extra information
-					pAd->ExtraInfo = EXTRA_INFO_CLEAR;
-                }
-            }
-            sprintf(extra, "Radio On\n");
-            wrq->length = strlen(extra) + 1; // 1: size of '\0'
-            break;
-
-
-#ifdef QOS_DLS_SUPPORT
-		case SHOW_DLS_ENTRY_INFO:
-			{
-				Set_DlsEntryInfo_Display_Proc(pAd, NULL);
-				wrq->length = 0; // 1: size of '\0'
-			}
-			break;
-#endif // QOS_DLS_SUPPORT //
-
-		case SHOW_CFG_VALUE:
-			{
-				Status = RTMPShowCfgValue(pAd, wrq->pointer, extra);
-				if (Status == 0)
-					wrq->length = strlen(extra) + 1; // 1: size of '\0'
-			}
-			break;
-		case SHOW_ADHOC_ENTRY_INFO:
-			Show_Adhoc_MacTable_Proc(pAd, extra);
-			wrq->length = strlen(extra) + 1; // 1: size of '\0'
-			break;
-        default:
-            DBGPRINT(RT_DEBUG_TRACE, ("%s - unknow subcmd = %d\n", __func__, subcmd));
-            break;
-    }
-
-    return Status;
-}
-
-#ifdef SIOCSIWMLME
-int rt_ioctl_siwmlme(struct net_device *dev,
-			   struct iw_request_info *info,
-			   union iwreq_data *wrqu,
-			   char *extra)
-{
-	PRTMP_ADAPTER   pAd = dev->ml_priv;
-	struct iw_mlme *pMlme = (struct iw_mlme *)wrqu->data.pointer;
-	MLME_QUEUE_ELEM				MsgElem;
-	MLME_DISASSOC_REQ_STRUCT	DisAssocReq;
-	MLME_DEAUTH_REQ_STRUCT      DeAuthReq;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("====> %s\n", __func__));
-
-	if (pMlme == NULL)
-		return -EINVAL;
-
-	switch(pMlme->cmd)
-	{
-#ifdef IW_MLME_DEAUTH
-		case IW_MLME_DEAUTH:
-			DBGPRINT(RT_DEBUG_TRACE, ("====> %s - IW_MLME_DEAUTH\n", __func__));
-			COPY_MAC_ADDR(DeAuthReq.Addr, pAd->CommonCfg.Bssid);
-			DeAuthReq.Reason = pMlme->reason_code;
-			MsgElem.MsgLen = sizeof(MLME_DEAUTH_REQ_STRUCT);
-			NdisMoveMemory(MsgElem.Msg, &DeAuthReq, sizeof(MLME_DEAUTH_REQ_STRUCT));
-			MlmeDeauthReqAction(pAd, &MsgElem);
-			if (INFRA_ON(pAd))
-			{
-			    LinkDown(pAd, FALSE);
-			    pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-			}
-			break;
-#endif // IW_MLME_DEAUTH //
-#ifdef IW_MLME_DISASSOC
-		case IW_MLME_DISASSOC:
-			DBGPRINT(RT_DEBUG_TRACE, ("====> %s - IW_MLME_DISASSOC\n", __func__));
-			COPY_MAC_ADDR(DisAssocReq.Addr, pAd->CommonCfg.Bssid);
-			DisAssocReq.Reason =  pMlme->reason_code;
-
-			MsgElem.Machine = ASSOC_STATE_MACHINE;
-			MsgElem.MsgType = MT2_MLME_DISASSOC_REQ;
-			MsgElem.MsgLen = sizeof(MLME_DISASSOC_REQ_STRUCT);
-			NdisMoveMemory(MsgElem.Msg, &DisAssocReq, sizeof(MLME_DISASSOC_REQ_STRUCT));
-
-			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
-			MlmeDisassocReqAction(pAd, &MsgElem);
-			break;
-#endif // IW_MLME_DISASSOC //
-		default:
-			DBGPRINT(RT_DEBUG_TRACE, ("====> %s - Unknow Command\n", __func__));
-			break;
-	}
-
-	return 0;
-}
-#endif // SIOCSIWMLME //
-
-#if WIRELESS_EXT > 17
-int rt_ioctl_siwauth(struct net_device *dev,
-			  struct iw_request_info *info,
-			  union iwreq_data *wrqu, char *extra)
-{
-	PRTMP_ADAPTER   pAdapter = dev->ml_priv;
-	struct iw_param *param = &wrqu->param;
-
-    //check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-  		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-    	return -ENETDOWN;
-	}
-	switch (param->flags & IW_AUTH_INDEX) {
-    	case IW_AUTH_WPA_VERSION:
-            if (param->value == IW_AUTH_WPA_VERSION_WPA)
-            {
-                pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPAPSK;
-				if (pAdapter->StaCfg.BssType == BSS_ADHOC)
-					pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPANone;
-            }
-            else if (param->value == IW_AUTH_WPA_VERSION_WPA2)
-                pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2PSK;
-
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_WPA_VERSION - param->value = %d!\n", __func__, param->value));
-            break;
-    	case IW_AUTH_CIPHER_PAIRWISE:
-            if (param->value == IW_AUTH_CIPHER_NONE)
-            {
-                pAdapter->StaCfg.WepStatus = Ndis802_11WEPDisabled;
-                pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-                pAdapter->StaCfg.PairCipher = Ndis802_11WEPDisabled;
-            }
-            else if (param->value == IW_AUTH_CIPHER_WEP40 ||
-                     param->value == IW_AUTH_CIPHER_WEP104)
-            {
-                pAdapter->StaCfg.WepStatus = Ndis802_11WEPEnabled;
-                pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-                pAdapter->StaCfg.PairCipher = Ndis802_11WEPEnabled;
-#ifdef WPA_SUPPLICANT_SUPPORT
-                pAdapter->StaCfg.IEEE8021X = FALSE;
-#endif // WPA_SUPPLICANT_SUPPORT //
-            }
-            else if (param->value == IW_AUTH_CIPHER_TKIP)
-            {
-                pAdapter->StaCfg.WepStatus = Ndis802_11Encryption2Enabled;
-                pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-                pAdapter->StaCfg.PairCipher = Ndis802_11Encryption2Enabled;
-            }
-            else if (param->value == IW_AUTH_CIPHER_CCMP)
-            {
-                pAdapter->StaCfg.WepStatus = Ndis802_11Encryption3Enabled;
-                pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-                pAdapter->StaCfg.PairCipher = Ndis802_11Encryption3Enabled;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_CIPHER_PAIRWISE - param->value = %d!\n", __func__, param->value));
-            break;
-    	case IW_AUTH_CIPHER_GROUP:
-            if (param->value == IW_AUTH_CIPHER_NONE)
-            {
-                pAdapter->StaCfg.GroupCipher = Ndis802_11WEPDisabled;
-            }
-            else if (param->value == IW_AUTH_CIPHER_WEP40 ||
-                     param->value == IW_AUTH_CIPHER_WEP104)
-            {
-                pAdapter->StaCfg.GroupCipher = Ndis802_11WEPEnabled;
-            }
-            else if (param->value == IW_AUTH_CIPHER_TKIP)
-            {
-                pAdapter->StaCfg.GroupCipher = Ndis802_11Encryption2Enabled;
-            }
-            else if (param->value == IW_AUTH_CIPHER_CCMP)
-            {
-                pAdapter->StaCfg.GroupCipher = Ndis802_11Encryption3Enabled;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_CIPHER_GROUP - param->value = %d!\n", __func__, param->value));
-            break;
-    	case IW_AUTH_KEY_MGMT:
-            if (param->value == IW_AUTH_KEY_MGMT_802_1X)
-            {
-                if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK)
-                {
-                    pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA;
-#ifdef WPA_SUPPLICANT_SUPPORT
-                    pAdapter->StaCfg.IEEE8021X = FALSE;
-#endif // WPA_SUPPLICANT_SUPPORT //
-                }
-                else if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)
-                {
-                    pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2;
-#ifdef WPA_SUPPLICANT_SUPPORT
-                    pAdapter->StaCfg.IEEE8021X = FALSE;
-#endif // WPA_SUPPLICANT_SUPPORT //
-                }
-#ifdef WPA_SUPPLICANT_SUPPORT
-                else
-                    // WEP 1x
-                    pAdapter->StaCfg.IEEE8021X = TRUE;
-#endif // WPA_SUPPLICANT_SUPPORT //
-            }
-            else if (param->value == 0)
-            {
-                //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-				STA_PORT_SECURED(pAdapter);
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_KEY_MGMT - param->value = %d!\n", __func__, param->value));
-            break;
-    	case IW_AUTH_RX_UNENCRYPTED_EAPOL:
-            break;
-    	case IW_AUTH_PRIVACY_INVOKED:
-            /*if (param->value == 0)
-			{
-                pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
-                pAdapter->StaCfg.WepStatus = Ndis802_11WEPDisabled;
-                pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-                pAdapter->StaCfg.PairCipher = Ndis802_11WEPDisabled;
-        	    pAdapter->StaCfg.GroupCipher = Ndis802_11WEPDisabled;
-            }*/
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_PRIVACY_INVOKED - param->value = %d!\n", __func__, param->value));
-    		break;
-    	case IW_AUTH_DROP_UNENCRYPTED:
-            if (param->value != 0)
-                pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-			else
-			{
-                //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-				STA_PORT_SECURED(pAdapter);
-			}
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_WPA_VERSION - param->value = %d!\n", __func__, param->value));
-    		break;
-    	case IW_AUTH_80211_AUTH_ALG:
-			if (param->value & IW_AUTH_ALG_SHARED_KEY)
-            {
-				pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeShared;
-			}
-            else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM)
-            {
-				pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
-			}
-            else
-				return -EINVAL;
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_80211_AUTH_ALG - param->value = %d!\n", __func__, param->value));
-			break;
-    	case IW_AUTH_WPA_ENABLED:
-    		DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_WPA_ENABLED - Driver supports WPA!(param->value = %d)\n", __func__, param->value));
-    		break;
-    	default:
-    		return -EOPNOTSUPP;
-}
-
-	return 0;
-}
-
-int rt_ioctl_giwauth(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-	PRTMP_ADAPTER   pAdapter = dev->ml_priv;
-	struct iw_param *param = &wrqu->param;
-
-    //check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-  		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-    	return -ENETDOWN;
-    }
-
-	switch (param->flags & IW_AUTH_INDEX) {
-	case IW_AUTH_DROP_UNENCRYPTED:
-        param->value = (pAdapter->StaCfg.WepStatus == Ndis802_11WEPDisabled) ? 0 : 1;
-		break;
-
-	case IW_AUTH_80211_AUTH_ALG:
-        param->value = (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeShared) ? IW_AUTH_ALG_SHARED_KEY : IW_AUTH_ALG_OPEN_SYSTEM;
-		break;
-
-	case IW_AUTH_WPA_ENABLED:
-		param->value = (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA) ? 1 : 0;
-		break;
-
-	default:
-		return -EOPNOTSUPP;
-	}
-    DBGPRINT(RT_DEBUG_TRACE, ("rt_ioctl_giwauth::param->value = %d!\n", param->value));
-	return 0;
-}
-
-void fnSetCipherKey(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  INT             keyIdx,
-    IN  UCHAR           CipherAlg,
-    IN  BOOLEAN         bGTK,
-    IN  struct iw_encode_ext *ext)
-{
-    NdisZeroMemory(&pAdapter->SharedKey[BSS0][keyIdx], sizeof(CIPHER_KEY));
-    pAdapter->SharedKey[BSS0][keyIdx].KeyLen = LEN_TKIP_EK;
-    NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, ext->key, LEN_TKIP_EK);
-    NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].TxMic, ext->key + LEN_TKIP_EK, LEN_TKIP_TXMICK);
-    NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].RxMic, ext->key + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK);
-    pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CipherAlg;
-
-    // Update group key information to ASIC Shared Key Table
-	AsicAddSharedKeyEntry(pAdapter,
-						  BSS0,
-						  keyIdx,
-						  pAdapter->SharedKey[BSS0][keyIdx].CipherAlg,
-						  pAdapter->SharedKey[BSS0][keyIdx].Key,
-						  pAdapter->SharedKey[BSS0][keyIdx].TxMic,
-						  pAdapter->SharedKey[BSS0][keyIdx].RxMic);
-
-    if (bGTK)
-        // Update ASIC WCID attribute table and IVEIV table
-    	RTMPAddWcidAttributeEntry(pAdapter,
-    							  BSS0,
-    							  keyIdx,
-    							  pAdapter->SharedKey[BSS0][keyIdx].CipherAlg,
-    							  NULL);
-    else
-        // Update ASIC WCID attribute table and IVEIV table
-    	RTMPAddWcidAttributeEntry(pAdapter,
-    							  BSS0,
-    							  keyIdx,
-    							  pAdapter->SharedKey[BSS0][keyIdx].CipherAlg,
-    							  &pAdapter->MacTab.Content[BSSID_WCID]);
-}
-
-int rt_ioctl_siwencodeext(struct net_device *dev,
-			   struct iw_request_info *info,
-			   union iwreq_data *wrqu,
-			   char *extra)
-			{
-    PRTMP_ADAPTER   pAdapter = dev->ml_priv;
-	struct iw_point *encoding = &wrqu->encoding;
-	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
-    int keyIdx, alg = ext->alg;
-
-    //check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-  		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-    	return -ENETDOWN;
-	}
-
-    if (encoding->flags & IW_ENCODE_DISABLED)
-	{
-        keyIdx = (encoding->flags & IW_ENCODE_INDEX) - 1;
-        // set BSSID wcid entry of the Pair-wise Key table as no-security mode
-	    AsicRemovePairwiseKeyEntry(pAdapter, BSS0, BSSID_WCID);
-        pAdapter->SharedKey[BSS0][keyIdx].KeyLen = 0;
-		pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CIPHER_NONE;
-		AsicRemoveSharedKeyEntry(pAdapter, 0, (UCHAR)keyIdx);
-        NdisZeroMemory(&pAdapter->SharedKey[BSS0][keyIdx], sizeof(CIPHER_KEY));
-        DBGPRINT(RT_DEBUG_TRACE, ("%s::Remove all keys!(encoding->flags = %x)\n", __func__, encoding->flags));
-    }
-					else
-    {
-        // Get Key Index and convet to our own defined key index
-    	keyIdx = (encoding->flags & IW_ENCODE_INDEX) - 1;
-    	if((keyIdx < 0) || (keyIdx >= NR_WEP_KEYS))
-    		return -EINVAL;
-
-        if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)
-        {
-            pAdapter->StaCfg.DefaultKeyId = keyIdx;
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::DefaultKeyId = %d\n", __func__, pAdapter->StaCfg.DefaultKeyId));
-        }
-
-        switch (alg) {
-    		case IW_ENCODE_ALG_NONE:
-                DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_ENCODE_ALG_NONE\n", __func__));
-    			break;
-    		case IW_ENCODE_ALG_WEP:
-                DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_ENCODE_ALG_WEP - ext->key_len = %d, keyIdx = %d\n", __func__, ext->key_len, keyIdx));
-    			if (ext->key_len == MAX_WEP_KEY_SIZE)
-                {
-        			pAdapter->SharedKey[BSS0][keyIdx].KeyLen = MAX_WEP_KEY_SIZE;
-                    pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CIPHER_WEP128;
-				}
-        		else if (ext->key_len == MIN_WEP_KEY_SIZE)
-                {
-                    pAdapter->SharedKey[BSS0][keyIdx].KeyLen = MIN_WEP_KEY_SIZE;
-                    pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CIPHER_WEP64;
-				}
-        		else
-                    return -EINVAL;
-
-                NdisZeroMemory(pAdapter->SharedKey[BSS0][keyIdx].Key,  16);
-			    NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, ext->key, ext->key_len);
-
-				if (pAdapter->StaCfg.GroupCipher == Ndis802_11GroupWEP40Enabled ||
-					pAdapter->StaCfg.GroupCipher == Ndis802_11GroupWEP104Enabled)
-				{
-					// Set Group key material to Asic
-					AsicAddSharedKeyEntry(pAdapter, BSS0, keyIdx, pAdapter->SharedKey[BSS0][keyIdx].CipherAlg, pAdapter->SharedKey[BSS0][keyIdx].Key, NULL, NULL);
-
-					// Update WCID attribute table and IVEIV table for this group key table
-					RTMPAddWcidAttributeEntry(pAdapter, BSS0, keyIdx, pAdapter->SharedKey[BSS0][keyIdx].CipherAlg, NULL);
-
-					STA_PORT_SECURED(pAdapter);
-
-    				// Indicate Connected for GUI
-    				pAdapter->IndicateMediaState = NdisMediaStateConnected;
-				}
-    			break;
-            case IW_ENCODE_ALG_TKIP:
-                DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_ENCODE_ALG_TKIP - keyIdx = %d, ext->key_len = %d\n", __func__, keyIdx, ext->key_len));
-                if (ext->key_len == 32)
-                {
-                    if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)
-                    {
-                        fnSetCipherKey(pAdapter, keyIdx, CIPHER_TKIP, FALSE, ext);
-                        if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA2)
-                        {
-                            //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-                            STA_PORT_SECURED(pAdapter);
-                        }
-		}
-                    else if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY)
-                    {
-                        fnSetCipherKey(pAdapter, keyIdx, CIPHER_TKIP, TRUE, ext);
-
-                        // set 802.1x port control
-            	        //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-            	        STA_PORT_SECURED(pAdapter);
-                    }
-                }
-                else
-                    return -EINVAL;
-                break;
-            case IW_ENCODE_ALG_CCMP:
-                if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)
-		{
-                    fnSetCipherKey(pAdapter, keyIdx, CIPHER_AES, FALSE, ext);
-                    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA2)
-                    	//pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-                    	STA_PORT_SECURED(pAdapter);
-                }
-                else if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY)
-                {
-                    fnSetCipherKey(pAdapter, keyIdx, CIPHER_AES, TRUE, ext);
-
-                    // set 802.1x port control
-        	        //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-        	        STA_PORT_SECURED(pAdapter);
-                }
-                break;
-    		default:
-    			return -EINVAL;
-		}
-    }
-
-    return 0;
-}
-
-int
-rt_ioctl_giwencodeext(struct net_device *dev,
-			  struct iw_request_info *info,
-			  union iwreq_data *wrqu, char *extra)
-{
-	PRTMP_ADAPTER pAd = dev->ml_priv;
-	PCHAR pKey = NULL;
-	struct iw_point *encoding = &wrqu->encoding;
-	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
-	int idx, max_key_len;
-
-	DBGPRINT(RT_DEBUG_TRACE ,("===> rt_ioctl_giwencodeext\n"));
-
-	max_key_len = encoding->length - sizeof(*ext);
-	if (max_key_len < 0)
-		return -EINVAL;
-
-	idx = encoding->flags & IW_ENCODE_INDEX;
-	if (idx)
-	{
-		if (idx < 1 || idx > 4)
-			return -EINVAL;
-		idx--;
-
-		if ((pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled) ||
-			(pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled))
-		{
-			if (idx != pAd->StaCfg.DefaultKeyId)
-			{
-				ext->key_len = 0;
-				return 0;
-			}
-		}
-	}
-	else
-		idx = pAd->StaCfg.DefaultKeyId;
-
-	encoding->flags = idx + 1;
-	memset(ext, 0, sizeof(*ext));
-
-	ext->key_len = 0;
-	switch(pAd->StaCfg.WepStatus) {
-		case Ndis802_11WEPDisabled:
-			ext->alg = IW_ENCODE_ALG_NONE;
-			encoding->flags |= IW_ENCODE_DISABLED;
-			break;
-		case Ndis802_11WEPEnabled:
-			ext->alg = IW_ENCODE_ALG_WEP;
-			if (pAd->SharedKey[BSS0][idx].KeyLen > max_key_len)
-				return -E2BIG;
-			else
-			{
-				ext->key_len = pAd->SharedKey[BSS0][idx].KeyLen;
-				pKey = &(pAd->SharedKey[BSS0][idx].Key[0]);
-			}
-			break;
-		case Ndis802_11Encryption2Enabled:
-		case Ndis802_11Encryption3Enabled:
-			if (pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled)
-				ext->alg = IW_ENCODE_ALG_TKIP;
-			else
-				ext->alg = IW_ENCODE_ALG_CCMP;
-
-			if (max_key_len < 32)
-				return -E2BIG;
-			else
-			{
-				ext->key_len = 32;
-				pKey = &pAd->StaCfg.PMK[0];
-			}
-			break;
-		default:
-			return -EINVAL;
-	}
-
-	if (ext->key_len && pKey)
-	{
-		encoding->flags |= IW_ENCODE_ENABLED;
-		memcpy(ext->key, pKey, ext->key_len);
-	}
-
-	return 0;
-}
-
-#ifdef SIOCSIWGENIE
-int rt_ioctl_siwgenie(struct net_device *dev,
-			  struct iw_request_info *info,
-			  union iwreq_data *wrqu, char *extra)
-{
-	PRTMP_ADAPTER   pAd = dev->ml_priv;
-
-	if (wrqu->data.length > MAX_LEN_OF_RSNIE ||
-	    (wrqu->data.length && extra == NULL))
-		return -EINVAL;
-
-	if (wrqu->data.length)
-	{
-		pAd->StaCfg.RSNIE_Len = wrqu->data.length;
-		NdisMoveMemory(&pAd->StaCfg.RSN_IE[0], extra, pAd->StaCfg.RSNIE_Len);
-	}
-	else
-	{
-		pAd->StaCfg.RSNIE_Len = 0;
-		NdisZeroMemory(&pAd->StaCfg.RSN_IE[0], MAX_LEN_OF_RSNIE);
-	}
-
-	return 0;
-}
-#endif // SIOCSIWGENIE //
-
-int rt_ioctl_giwgenie(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-	PRTMP_ADAPTER   pAd = dev->ml_priv;
-
-	if ((pAd->StaCfg.RSNIE_Len == 0) ||
-		(pAd->StaCfg.AuthMode < Ndis802_11AuthModeWPA))
-	{
-		wrqu->data.length = 0;
-		return 0;
-	}
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-#ifdef SIOCSIWGENIE
-	if (pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE)
-	{
-	if (wrqu->data.length < pAd->StaCfg.RSNIE_Len)
-		return -E2BIG;
-
-	wrqu->data.length = pAd->StaCfg.RSNIE_Len;
-	memcpy(extra, &pAd->StaCfg.RSN_IE[0], pAd->StaCfg.RSNIE_Len);
-	}
-	else
-#endif // SIOCSIWGENIE //
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-	{
-		UCHAR RSNIe = IE_WPA;
-
-		if (wrqu->data.length < (pAd->StaCfg.RSNIE_Len + 2)) // ID, Len
-			return -E2BIG;
-		wrqu->data.length = pAd->StaCfg.RSNIE_Len + 2;
-
-		if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK) ||
-            (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2))
-			RSNIe = IE_RSN;
-
-		extra[0] = (char)RSNIe;
-		extra[1] = pAd->StaCfg.RSNIE_Len;
-		memcpy(extra+2, &pAd->StaCfg.RSN_IE[0], pAd->StaCfg.RSNIE_Len);
-	}
-
-	return 0;
-}
-
-int rt_ioctl_siwpmksa(struct net_device *dev,
-			   struct iw_request_info *info,
-			   union iwreq_data *wrqu,
-			   char *extra)
-{
-	PRTMP_ADAPTER   pAd = dev->ml_priv;
-	struct iw_pmksa *pPmksa = (struct iw_pmksa *)wrqu->data.pointer;
-	INT	CachedIdx = 0, idx = 0;
-
-	if (pPmksa == NULL)
-		return -EINVAL;
-
-	DBGPRINT(RT_DEBUG_TRACE ,("===> rt_ioctl_siwpmksa\n"));
-	switch(pPmksa->cmd)
-	{
-		case IW_PMKSA_FLUSH:
-			NdisZeroMemory(pAd->StaCfg.SavedPMK, sizeof(BSSID_INFO)*PMKID_NO);
-			DBGPRINT(RT_DEBUG_TRACE ,("rt_ioctl_siwpmksa - IW_PMKSA_FLUSH\n"));
-			break;
-		case IW_PMKSA_REMOVE:
-			for (CachedIdx = 0; CachedIdx < pAd->StaCfg.SavedPMKNum; CachedIdx++)
-			{
-		        // compare the BSSID
-		        if (NdisEqualMemory(pPmksa->bssid.sa_data, pAd->StaCfg.SavedPMK[CachedIdx].BSSID, MAC_ADDR_LEN))
-		        {
-		        	NdisZeroMemory(pAd->StaCfg.SavedPMK[CachedIdx].BSSID, MAC_ADDR_LEN);
-					NdisZeroMemory(pAd->StaCfg.SavedPMK[CachedIdx].PMKID, 16);
-					for (idx = CachedIdx; idx < (pAd->StaCfg.SavedPMKNum - 1); idx++)
-					{
-						NdisMoveMemory(&pAd->StaCfg.SavedPMK[idx].BSSID[0], &pAd->StaCfg.SavedPMK[idx+1].BSSID[0], MAC_ADDR_LEN);
-						NdisMoveMemory(&pAd->StaCfg.SavedPMK[idx].PMKID[0], &pAd->StaCfg.SavedPMK[idx+1].PMKID[0], 16);
-					}
-					pAd->StaCfg.SavedPMKNum--;
-			        break;
-		        }
-	        }
-
-			DBGPRINT(RT_DEBUG_TRACE ,("rt_ioctl_siwpmksa - IW_PMKSA_REMOVE\n"));
-			break;
-		case IW_PMKSA_ADD:
-			for (CachedIdx = 0; CachedIdx < pAd->StaCfg.SavedPMKNum; CachedIdx++)
-			{
-		        // compare the BSSID
-		        if (NdisEqualMemory(pPmksa->bssid.sa_data, pAd->StaCfg.SavedPMK[CachedIdx].BSSID, MAC_ADDR_LEN))
-			        break;
-	        }
-
-	        // Found, replace it
-	        if (CachedIdx < PMKID_NO)
-	        {
-		        DBGPRINT(RT_DEBUG_OFF, ("Update PMKID, idx = %d\n", CachedIdx));
-		        NdisMoveMemory(&pAd->StaCfg.SavedPMK[CachedIdx].BSSID[0], pPmksa->bssid.sa_data, MAC_ADDR_LEN);
-				NdisMoveMemory(&pAd->StaCfg.SavedPMK[CachedIdx].PMKID[0], pPmksa->pmkid, 16);
-		        pAd->StaCfg.SavedPMKNum++;
-	        }
-	        // Not found, replace the last one
-	        else
-	        {
-		        // Randomly replace one
-		        CachedIdx = (pPmksa->bssid.sa_data[5] % PMKID_NO);
-		        DBGPRINT(RT_DEBUG_OFF, ("Update PMKID, idx = %d\n", CachedIdx));
-		        NdisMoveMemory(&pAd->StaCfg.SavedPMK[CachedIdx].BSSID[0], pPmksa->bssid.sa_data, MAC_ADDR_LEN);
-				NdisMoveMemory(&pAd->StaCfg.SavedPMK[CachedIdx].PMKID[0], pPmksa->pmkid, 16);
-	        }
-
-			DBGPRINT(RT_DEBUG_TRACE ,("rt_ioctl_siwpmksa - IW_PMKSA_ADD\n"));
-			break;
-		default:
-			DBGPRINT(RT_DEBUG_TRACE ,("rt_ioctl_siwpmksa - Unknow Command!!\n"));
-			break;
-	}
-
-	return 0;
-}
-#endif // #if WIRELESS_EXT > 17
-
-#ifdef DBG
-static int
-rt_private_ioctl_bbp(struct net_device *dev, struct iw_request_info *info,
-		struct iw_point *wrq, char *extra)
-			{
-	CHAR				*this_char;
-	CHAR				*value = NULL;
-	UCHAR				regBBP = 0;
-//	CHAR				arg[255]={0};
-	UINT32				bbpId;
-	UINT32				bbpValue;
-	BOOLEAN				bIsPrintAllBBP = FALSE;
-	INT					Status = 0;
-    PRTMP_ADAPTER       pAdapter = dev->ml_priv;
-
-
-	memset(extra, 0x00, IW_PRIV_SIZE_MASK);
-
-	if (wrq->length > 1) //No parameters.
-				{
-		sprintf(extra, "\n");
-
-		//Parsing Read or Write
-		this_char = wrq->pointer;
-		DBGPRINT(RT_DEBUG_TRACE, ("this_char=%s\n", this_char));
-		if (!*this_char)
-			goto next;
-
-		if ((value = rtstrchr(this_char, '=')) != NULL)
-			*value++ = 0;
-
-		if (!value || !*value)
-		{ //Read
-			DBGPRINT(RT_DEBUG_TRACE, ("this_char=%s, value=%s\n", this_char, value));
-			if (sscanf(this_char, "%d", &(bbpId)) == 1)
-			{
-				if (bbpId <= 136)
-				{
-#ifdef RALINK_ATE
-					if (ATE_ON(pAdapter))
-					{
-						ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-					}
-					else
-#endif // RALINK_ATE //
-					{
-					RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-					}
-					sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X\n", bbpId, bbpId*2, regBBP);
-                    wrq->length = strlen(extra) + 1; // 1: size of '\0'
-					DBGPRINT(RT_DEBUG_TRACE, ("msg=%s\n", extra));
-				}
-				else
-				{//Invalid parametes, so default printk all bbp
-					bIsPrintAllBBP = TRUE;
-					goto next;
-				}
-			}
-			else
-			{ //Invalid parametes, so default printk all bbp
-				bIsPrintAllBBP = TRUE;
-				goto next;
-			}
-		}
-		else
-		{ //Write
-			if ((sscanf(this_char, "%d", &(bbpId)) == 1) && (sscanf(value, "%x", &(bbpValue)) == 1))
-			{
-				if (bbpId <= 136)
-				{
-#ifdef RALINK_ATE
-					if (ATE_ON(pAdapter))
-					{
-						ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, bbpId, bbpValue);
-						//Read it back for showing
-						ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-					}
-					else
-#endif // RALINK_ATE //
-					{
-					    RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, bbpId, bbpValue);
-    					//Read it back for showing
-    					RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-			}
-					sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X\n", bbpId, bbpId*2, regBBP);
-                    wrq->length = strlen(extra) + 1; // 1: size of '\0'
-					DBGPRINT(RT_DEBUG_TRACE, ("msg=%s\n", extra));
-				}
-				else
-				{//Invalid parametes, so default printk all bbp
-					bIsPrintAllBBP = TRUE;
-					goto next;
-				}
-			}
-			else
-			{ //Invalid parametes, so default printk all bbp
-				bIsPrintAllBBP = TRUE;
-				goto next;
-			}
-		}
-		}
-	else
-		bIsPrintAllBBP = TRUE;
-
-next:
-	if (bIsPrintAllBBP)
-	{
-		memset(extra, 0x00, IW_PRIV_SIZE_MASK);
-		sprintf(extra, "\n");
-		for (bbpId = 0; bbpId <= 136; bbpId++)
-		{
-		    if (strlen(extra) >= (IW_PRIV_SIZE_MASK - 10))
-                break;
-#ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-			}
-			else
-#endif // RALINK_ATE //
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-			sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X    ", bbpId, bbpId*2, regBBP);
-			if (bbpId%5 == 4)
-				sprintf(extra+strlen(extra), "\n");
-		}
-
-        wrq->length = strlen(extra) + 1; // 1: size of '\0'
-        DBGPRINT(RT_DEBUG_TRACE, ("wrq->length = %d\n", wrq->length));
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<==rt_private_ioctl_bbp\n\n"));
-
-    return Status;
-}
-#endif // DBG //
-
-int rt_ioctl_siwrate(struct net_device *dev,
-			struct iw_request_info *info,
-			union iwreq_data *wrqu, char *extra)
-{
-    PRTMP_ADAPTER   pAd = dev->ml_priv;
-    UINT32          rate = wrqu->bitrate.value, fixed = wrqu->bitrate.fixed;
-
-    //check if the interface is down
-	if(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-  		DBGPRINT(RT_DEBUG_TRACE, ("rt_ioctl_siwrate::Network is down!\n"));
-    	return -ENETDOWN;
-	}
-
-    DBGPRINT(RT_DEBUG_TRACE, ("rt_ioctl_siwrate::(rate = %d, fixed = %d)\n", rate, fixed));
-    /* rate = -1 => auto rate
-       rate = X, fixed = 1 => (fixed rate X)
-    */
-    if (rate == -1)
-    {
-		//Auto Rate
-		pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
-		pAd->StaCfg.bAutoTxRateSwitch = TRUE;
-		if ((pAd->CommonCfg.PhyMode <= PHY_11G) ||
-		    (pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE <= MODE_OFDM))
-			RTMPSetDesiredRates(pAd, -1);
-
-#ifdef DOT11_N_SUPPORT
-		SetCommonHT(pAd);
-#endif // DOT11_N_SUPPORT //
-    }
-    else
-    {
-        if (fixed)
-        {
-        	pAd->StaCfg.bAutoTxRateSwitch = FALSE;
-            if ((pAd->CommonCfg.PhyMode <= PHY_11G) ||
-                (pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE <= MODE_OFDM))
-                RTMPSetDesiredRates(pAd, rate);
-            else
-            {
-                pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
-#ifdef DOT11_N_SUPPORT
-                SetCommonHT(pAd);
-#endif // DOT11_N_SUPPORT //
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("rt_ioctl_siwrate::(HtMcs=%d)\n",pAd->StaCfg.DesiredTransmitSetting.field.MCS));
-        }
-        else
-        {
-            // TODO: rate = X, fixed = 0 => (rates <= X)
-            return -EOPNOTSUPP;
-        }
-    }
-
-    return 0;
-}
-
-int rt_ioctl_giwrate(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-    PRTMP_ADAPTER   pAd = dev->ml_priv;
-    int rate_index = 0, rate_count = 0;
-    HTTRANSMIT_SETTING ht_setting;
-    __s32 ralinkrate[] =
-	{2,  4,   11,  22, // CCK
-	12, 18,   24,  36, 48, 72, 96, 108, // OFDM
-	13, 26,   39,  52,  78, 104, 117, 130, 26,  52,  78, 104, 156, 208, 234, 260, // 20MHz, 800ns GI, MCS: 0 ~ 15
-	39, 78,  117, 156, 234, 312, 351, 390,										  // 20MHz, 800ns GI, MCS: 16 ~ 23
-	27, 54,   81, 108, 162, 216, 243, 270, 54, 108, 162, 216, 324, 432, 486, 540, // 40MHz, 800ns GI, MCS: 0 ~ 15
-	81, 162, 243, 324, 486, 648, 729, 810,										  // 40MHz, 800ns GI, MCS: 16 ~ 23
-	14, 29,   43,  57,  87, 115, 130, 144, 29, 59,   87, 115, 173, 230, 260, 288, // 20MHz, 400ns GI, MCS: 0 ~ 15
-	43, 87,  130, 173, 260, 317, 390, 433,										  // 20MHz, 400ns GI, MCS: 16 ~ 23
-	30, 60,   90, 120, 180, 240, 270, 300, 60, 120, 180, 240, 360, 480, 540, 600, // 40MHz, 400ns GI, MCS: 0 ~ 15
-	90, 180, 270, 360, 540, 720, 810, 900};										  // 40MHz, 400ns GI, MCS: 16 ~ 23
-
-    rate_count = sizeof(ralinkrate)/sizeof(__s32);
-    //check if the interface is down
-	if(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-  		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-    	return -ENETDOWN;
-	}
-
-    if ((pAd->StaCfg.bAutoTxRateSwitch == FALSE) &&
-        (INFRA_ON(pAd)) &&
-        ((pAd->CommonCfg.PhyMode <= PHY_11G) || (pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE <= MODE_OFDM)))
-        ht_setting.word = pAd->StaCfg.HTPhyMode.word;
-    else
-        ht_setting.word = pAd->MacTab.Content[BSSID_WCID].HTPhyMode.word;
-
-#ifdef DOT11_N_SUPPORT
-    if (ht_setting.field.MODE >= MODE_HTMIX)
-    {
-//    	rate_index = 12 + ((UCHAR)ht_setting.field.BW *16) + ((UCHAR)ht_setting.field.ShortGI *32) + ((UCHAR)ht_setting.field.MCS);
-    	rate_index = 12 + ((UCHAR)ht_setting.field.BW *24) + ((UCHAR)ht_setting.field.ShortGI *48) + ((UCHAR)ht_setting.field.MCS);
-    }
-    else
-#endif // DOT11_N_SUPPORT //
-    if (ht_setting.field.MODE == MODE_OFDM)
-    	rate_index = (UCHAR)(ht_setting.field.MCS) + 4;
-    else if (ht_setting.field.MODE == MODE_CCK)
-    	rate_index = (UCHAR)(ht_setting.field.MCS);
-
-    if (rate_index < 0)
-        rate_index = 0;
-
-    if (rate_index > rate_count)
-        rate_index = rate_count;
-
-    wrqu->bitrate.value = ralinkrate[rate_index] * 500000;
-    wrqu->bitrate.disabled = 0;
-
-    return 0;
-}
-
-static const iw_handler rt_handler[] =
-{
-	(iw_handler) NULL,			            /* SIOCSIWCOMMIT */
-	(iw_handler) rt_ioctl_giwname,			/* SIOCGIWNAME   */
-	(iw_handler) NULL,			            /* SIOCSIWNWID   */
-	(iw_handler) NULL,			            /* SIOCGIWNWID   */
-	(iw_handler) rt_ioctl_siwfreq,		    /* SIOCSIWFREQ   */
-	(iw_handler) rt_ioctl_giwfreq,		    /* SIOCGIWFREQ   */
-	(iw_handler) rt_ioctl_siwmode,		    /* SIOCSIWMODE   */
-	(iw_handler) rt_ioctl_giwmode,		    /* SIOCGIWMODE   */
-	(iw_handler) NULL,		                /* SIOCSIWSENS   */
-	(iw_handler) NULL,		                /* SIOCGIWSENS   */
-	(iw_handler) NULL /* not used */,		/* SIOCSIWRANGE  */
-	(iw_handler) rt_ioctl_giwrange,		    /* SIOCGIWRANGE  */
-	(iw_handler) NULL /* not used */,		/* SIOCSIWPRIV   */
-	(iw_handler) NULL /* kernel code */,    /* SIOCGIWPRIV   */
-	(iw_handler) NULL /* not used */,		/* SIOCSIWSTATS  */
-	(iw_handler) rt28xx_get_wireless_stats /* kernel code */,    /* SIOCGIWSTATS  */
-	(iw_handler) NULL,		                /* SIOCSIWSPY    */
-	(iw_handler) NULL,		                /* SIOCGIWSPY    */
-	(iw_handler) NULL,				        /* SIOCSIWTHRSPY */
-	(iw_handler) NULL,				        /* SIOCGIWTHRSPY */
-	(iw_handler) rt_ioctl_siwap,            /* SIOCSIWAP     */
-	(iw_handler) rt_ioctl_giwap,		    /* SIOCGIWAP     */
-#ifdef SIOCSIWMLME
-	(iw_handler) rt_ioctl_siwmlme,	        /* SIOCSIWMLME   */
-#else
-	(iw_handler) NULL,				        /* SIOCSIWMLME */
-#endif // SIOCSIWMLME //
-	(iw_handler) rt_ioctl_iwaplist,		    /* SIOCGIWAPLIST */
-#ifdef SIOCGIWSCAN
-	(iw_handler) rt_ioctl_siwscan,		    /* SIOCSIWSCAN   */
-	(iw_handler) rt_ioctl_giwscan,		    /* SIOCGIWSCAN   */
-#else
-	(iw_handler) NULL,				        /* SIOCSIWSCAN   */
-	(iw_handler) NULL,				        /* SIOCGIWSCAN   */
-#endif /* SIOCGIWSCAN */
-	(iw_handler) rt_ioctl_siwessid,		    /* SIOCSIWESSID  */
-	(iw_handler) rt_ioctl_giwessid,		    /* SIOCGIWESSID  */
-	(iw_handler) rt_ioctl_siwnickn,		    /* SIOCSIWNICKN  */
-	(iw_handler) rt_ioctl_giwnickn,		    /* SIOCGIWNICKN  */
-	(iw_handler) NULL,				        /* -- hole --    */
-	(iw_handler) NULL,				        /* -- hole --    */
-	(iw_handler) rt_ioctl_siwrate,          /* SIOCSIWRATE   */
-	(iw_handler) rt_ioctl_giwrate,          /* SIOCGIWRATE   */
-	(iw_handler) rt_ioctl_siwrts,		    /* SIOCSIWRTS    */
-	(iw_handler) rt_ioctl_giwrts,		    /* SIOCGIWRTS    */
-	(iw_handler) rt_ioctl_siwfrag,		    /* SIOCSIWFRAG   */
-	(iw_handler) rt_ioctl_giwfrag,		    /* SIOCGIWFRAG   */
-	(iw_handler) NULL,		                /* SIOCSIWTXPOW  */
-	(iw_handler) NULL,		                /* SIOCGIWTXPOW  */
-	(iw_handler) NULL,		                /* SIOCSIWRETRY  */
-	(iw_handler) NULL,		                /* SIOCGIWRETRY  */
-	(iw_handler) rt_ioctl_siwencode,		/* SIOCSIWENCODE */
-	(iw_handler) rt_ioctl_giwencode,		/* SIOCGIWENCODE */
-	(iw_handler) NULL,		                /* SIOCSIWPOWER  */
-	(iw_handler) NULL,		                /* SIOCGIWPOWER  */
-	(iw_handler) NULL,						/* -- hole -- */
-	(iw_handler) NULL,						/* -- hole -- */
-#if WIRELESS_EXT > 17
-    (iw_handler) rt_ioctl_siwgenie,         /* SIOCSIWGENIE  */
-	(iw_handler) rt_ioctl_giwgenie,         /* SIOCGIWGENIE  */
-	(iw_handler) rt_ioctl_siwauth,		    /* SIOCSIWAUTH   */
-	(iw_handler) rt_ioctl_giwauth,		    /* SIOCGIWAUTH   */
-	(iw_handler) rt_ioctl_siwencodeext,	    /* SIOCSIWENCODEEXT */
-	(iw_handler) rt_ioctl_giwencodeext,		/* SIOCGIWENCODEEXT */
-	(iw_handler) rt_ioctl_siwpmksa,         /* SIOCSIWPMKSA  */
-#endif
-};
-
-static const iw_handler rt_priv_handlers[] = {
-	(iw_handler) NULL, /* + 0x00 */
-	(iw_handler) NULL, /* + 0x01 */
-#ifndef CONFIG_AP_SUPPORT
-	(iw_handler) rt_ioctl_setparam, /* + 0x02 */
-#else
-	(iw_handler) NULL, /* + 0x02 */
-#endif // CONFIG_AP_SUPPORT //
-#ifdef DBG
-	(iw_handler) rt_private_ioctl_bbp, /* + 0x03 */
-#else
-	(iw_handler) NULL, /* + 0x03 */
-#endif
-	(iw_handler) NULL, /* + 0x04 */
-	(iw_handler) NULL, /* + 0x05 */
-	(iw_handler) NULL, /* + 0x06 */
-	(iw_handler) NULL, /* + 0x07 */
-	(iw_handler) NULL, /* + 0x08 */
-	(iw_handler) rt_private_get_statistics, /* + 0x09 */
-	(iw_handler) NULL, /* + 0x0A */
-	(iw_handler) NULL, /* + 0x0B */
-	(iw_handler) NULL, /* + 0x0C */
-	(iw_handler) NULL, /* + 0x0D */
-	(iw_handler) NULL, /* + 0x0E */
-	(iw_handler) NULL, /* + 0x0F */
-	(iw_handler) NULL, /* + 0x10 */
-	(iw_handler) rt_private_show, /* + 0x11 */
-    (iw_handler) NULL, /* + 0x12 */
-	(iw_handler) NULL, /* + 0x13 */
-	(iw_handler) NULL, /* + 0x15 */
-	(iw_handler) NULL, /* + 0x17 */
-	(iw_handler) NULL, /* + 0x18 */
-};
-
-const struct iw_handler_def rt28xx_iw_handler_def =
-{
-#define	N(a)	(sizeof (a) / sizeof (a[0]))
-	.standard	= (iw_handler *) rt_handler,
-	.num_standard	= sizeof(rt_handler) / sizeof(iw_handler),
-	.private	= (iw_handler *) rt_priv_handlers,
-	.num_private		= N(rt_priv_handlers),
-	.private_args	= (struct iw_priv_args *) privtab,
-	.num_private_args	= N(privtab),
-#if IW_HANDLER_VERSION >= 7
-    .get_wireless_stats = rt28xx_get_wireless_stats,
-#endif
-};
-
-INT RTMPSetInformation(
-    IN  PRTMP_ADAPTER pAdapter,
-    IN  OUT struct ifreq    *rq,
-    IN  INT                 cmd)
-{
-    struct iwreq                        *wrq = (struct iwreq *) rq;
-    NDIS_802_11_SSID                    Ssid;
-    NDIS_802_11_MAC_ADDRESS             Bssid;
-    RT_802_11_PHY_MODE                  PhyMode;
-    RT_802_11_STA_CONFIG                StaConfig;
-    NDIS_802_11_RATES                   aryRates;
-    RT_802_11_PREAMBLE                  Preamble;
-    NDIS_802_11_WEP_STATUS              WepStatus;
-    NDIS_802_11_AUTHENTICATION_MODE     AuthMode = Ndis802_11AuthModeMax;
-    NDIS_802_11_NETWORK_INFRASTRUCTURE  BssType;
-    NDIS_802_11_RTS_THRESHOLD           RtsThresh;
-    NDIS_802_11_FRAGMENTATION_THRESHOLD FragThresh;
-    NDIS_802_11_POWER_MODE              PowerMode;
-    PNDIS_802_11_KEY                    pKey = NULL;
-    PNDIS_802_11_WEP			        pWepKey =NULL;
-    PNDIS_802_11_REMOVE_KEY             pRemoveKey = NULL;
-    NDIS_802_11_CONFIGURATION           Config, *pConfig = NULL;
-    NDIS_802_11_NETWORK_TYPE            NetType;
-    ULONG                               Now;
-    UINT                                KeyIdx = 0;
-    INT                                 Status = NDIS_STATUS_SUCCESS, MaxPhyMode = PHY_11G;
-    ULONG                               PowerTemp;
-    BOOLEAN                             RadioState;
-    BOOLEAN                             StateMachineTouched = FALSE;
-#ifdef DOT11_N_SUPPORT
-	OID_SET_HT_PHYMODE					HT_PhyMode;	//11n ,kathy
-#endif // DOT11_N_SUPPORT //
-#ifdef WPA_SUPPLICANT_SUPPORT
-    PNDIS_802_11_PMKID                  pPmkId = NULL;
-    BOOLEAN				                IEEE8021xState = FALSE;
-    BOOLEAN				                IEEE8021x_required_keys = FALSE;
-    UCHAR                               wpa_supplicant_enable = 0;
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef SNMP_SUPPORT
-	TX_RTY_CFG_STRUC			tx_rty_cfg;
-	ULONG						ShortRetryLimit, LongRetryLimit;
-	UCHAR						ctmp;
-#endif // SNMP_SUPPORT //
-
-
-
-#ifdef DOT11_N_SUPPORT
-	MaxPhyMode = PHY_11N_5G;
-#endif // DOT11_N_SUPPORT //
-
-
-	DBGPRINT(RT_DEBUG_TRACE, ("-->RTMPSetInformation(),	0x%08x\n", cmd&0x7FFF));
-    switch(cmd & 0x7FFF) {
-        case RT_OID_802_11_COUNTRY_REGION:
-            if (wrq->u.data.length < sizeof(UCHAR))
-                Status = -EINVAL;
-			// Only avaliable when EEPROM not programming
-            else if (!(pAdapter->CommonCfg.CountryRegion & 0x80) && !(pAdapter->CommonCfg.CountryRegionForABand & 0x80))
-            {
-                ULONG   Country;
-                UCHAR	TmpPhy;
-
-				Status = copy_from_user(&Country, wrq->u.data.pointer, wrq->u.data.length);
-				pAdapter->CommonCfg.CountryRegion = (UCHAR)(Country & 0x000000FF);
-				pAdapter->CommonCfg.CountryRegionForABand = (UCHAR)((Country >> 8) & 0x000000FF);
-                TmpPhy = pAdapter->CommonCfg.PhyMode;
-				pAdapter->CommonCfg.PhyMode = 0xff;
-				// Build all corresponding channel information
-				RTMPSetPhyMode(pAdapter, TmpPhy);
-#ifdef DOT11_N_SUPPORT
-				SetCommonHT(pAdapter);
-#endif // DOT11_N_SUPPORT //
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_COUNTRY_REGION (A:%d  B/G:%d)\n", pAdapter->CommonCfg.CountryRegionForABand,
-				    pAdapter->CommonCfg.CountryRegion));
-            }
-            break;
-        case OID_802_11_BSSID_LIST_SCAN:
- #ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				break;
-			}
-#endif // RALINK_ATE //
-            Now = jiffies;
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_BSSID_LIST_SCAN, TxCnt = %d \n", pAdapter->RalinkCounters.LastOneSecTotalTxCount));
-
-            if (MONITOR_ON(pAdapter))
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("!!! Driver is in Monitor Mode now !!!\n"));
-                break;
-            }
-
-			//Benson add 20080527, when radio off, sta don't need to scan
-			if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_RADIO_OFF))
-				break;
-
-			if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-			{
-                DBGPRINT(RT_DEBUG_TRACE, ("!!! Driver is scanning now !!!\n"));
-				pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE;
-				Status = NDIS_STATUS_SUCCESS;
-                break;
-            }
-
-			if (pAdapter->RalinkCounters.LastOneSecTotalTxCount > 100)
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("!!! Link UP, ignore this set::OID_802_11_BSSID_LIST_SCAN\n"));
-				Status = NDIS_STATUS_SUCCESS;
-				pAdapter->StaCfg.ScanCnt = 99;		// Prevent auto scan triggered by this OID
-				break;
-            }
-
-            if ((OPSTATUS_TEST_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED)) &&
-				((pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA) ||
-				(pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
-				(pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) ||
-				(pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)) &&
-                (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("!!! Link UP, Port Not Secured! ignore this set::OID_802_11_BSSID_LIST_SCAN\n"));
-				Status = NDIS_STATUS_SUCCESS;
-				pAdapter->StaCfg.ScanCnt = 99;		// Prevent auto scan triggered by this OID
-				break;
-            }
-
-
-            if (pAdapter->Mlme.CntlMachine.CurrState != CNTL_IDLE)
-            {
-                RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-                DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
-            }
-
-            // tell CNTL state machine to call NdisMSetInformationComplete() after completing
-            // this request, because this request is initiated by NDIS.
-            pAdapter->MlmeAux.CurrReqIsFromNdis = FALSE;
-            // Reset allowed scan retries
-            pAdapter->StaCfg.ScanCnt = 0;
-            pAdapter->StaCfg.LastScanTime = Now;
-
-			pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE;
-            RTMP_SET_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
-            MlmeEnqueue(pAdapter,
-                        MLME_CNTL_STATE_MACHINE,
-                        OID_802_11_BSSID_LIST_SCAN,
-                        0,
-                        NULL);
-
-            Status = NDIS_STATUS_SUCCESS;
-            StateMachineTouched = TRUE;
-            break;
-        case OID_802_11_SSID:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_SSID))
-                Status = -EINVAL;
-            else
-            {
-            	PCHAR pSsidString = NULL;
-                Status = copy_from_user(&Ssid, wrq->u.data.pointer, wrq->u.data.length);
-
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_SSID (Len=%d,Ssid=%s)\n", Ssid.SsidLength, Ssid.Ssid));
-                if (Ssid.SsidLength > MAX_LEN_OF_SSID)
-                    Status = -EINVAL;
-                else
-                {
-                	if (Ssid.SsidLength == 0)
-                	{
-                		Set_SSID_Proc(pAdapter, "");
-                	}
-					else
-                	{
-	                	pSsidString = (CHAR *) kmalloc(MAX_LEN_OF_SSID+1, MEM_ALLOC_FLAG);
-						if (pSsidString)
-						{
-							NdisZeroMemory(pSsidString, MAX_LEN_OF_SSID+1);
-							NdisMoveMemory(pSsidString, Ssid.Ssid, Ssid.SsidLength);
-	                		Set_SSID_Proc(pAdapter, pSsidString);
-							kfree(pSsidString);
-						}
-						else
-							Status = -ENOMEM;
-                	}
-                }
-            }
-            break;
-        case OID_802_11_BSSID:
-#ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				break;
-			}
-#endif // RALINK_ATE //
-            if (wrq->u.data.length != sizeof(NDIS_802_11_MAC_ADDRESS))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&Bssid, wrq->u.data.pointer, wrq->u.data.length);
-
-                // tell CNTL state machine to call NdisMSetInformationComplete() after completing
-                // this request, because this request is initiated by NDIS.
-                pAdapter->MlmeAux.CurrReqIsFromNdis = FALSE;
-
-				// Prevent to connect AP again in STAMlmePeriodicExec
-				pAdapter->MlmeAux.AutoReconnectSsidLen= 32;
-
-                // Reset allowed scan retries
-				pAdapter->StaCfg.ScanCnt = 0;
-
-                if (pAdapter->Mlme.CntlMachine.CurrState != CNTL_IDLE)
-                {
-                    RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-                    DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
-                }
-                MlmeEnqueue(pAdapter,
-                            MLME_CNTL_STATE_MACHINE,
-                            OID_802_11_BSSID,
-                            sizeof(NDIS_802_11_MAC_ADDRESS),
-                            (VOID *)&Bssid);
-                Status = NDIS_STATUS_SUCCESS;
-                StateMachineTouched = TRUE;
-
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_BSSID %02x:%02x:%02x:%02x:%02x:%02x\n",
-                                        Bssid[0], Bssid[1], Bssid[2], Bssid[3], Bssid[4], Bssid[5]));
-            }
-            break;
-        case RT_OID_802_11_RADIO:
-            if (wrq->u.data.length != sizeof(BOOLEAN))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&RadioState, wrq->u.data.pointer, wrq->u.data.length);
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_RADIO (=%d)\n", RadioState));
-                if (pAdapter->StaCfg.bSwRadio != RadioState)
-                {
-                    pAdapter->StaCfg.bSwRadio = RadioState;
-                    if (pAdapter->StaCfg.bRadio != (pAdapter->StaCfg.bHwRadio && pAdapter->StaCfg.bSwRadio))
-                    {
-                        pAdapter->StaCfg.bRadio = (pAdapter->StaCfg.bHwRadio && pAdapter->StaCfg.bSwRadio);
-                        if (pAdapter->StaCfg.bRadio == TRUE)
-                        {
-                            MlmeRadioOn(pAdapter);
-                            // Update extra information
-							pAdapter->ExtraInfo = EXTRA_INFO_CLEAR;
-                        }
-                        else
-                        {
-                            MlmeRadioOff(pAdapter);
-                            // Update extra information
-							pAdapter->ExtraInfo = SW_RADIO_OFF;
-                        }
-                    }
-                }
-            }
-            break;
-        case RT_OID_802_11_PHY_MODE:
-            if (wrq->u.data.length != sizeof(RT_802_11_PHY_MODE))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&PhyMode, wrq->u.data.pointer, wrq->u.data.length);
-				if (PhyMode <= MaxPhyMode)
-				{
-                	RTMPSetPhyMode(pAdapter, PhyMode);
-#ifdef DOT11_N_SUPPORT
-					SetCommonHT(pAdapter);
-#endif // DOT11_N_SUPPORT //
-				}
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_PHY_MODE (=%d)\n", PhyMode));
-            }
-            break;
-        case RT_OID_802_11_STA_CONFIG:
-            if (wrq->u.data.length != sizeof(RT_802_11_STA_CONFIG))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&StaConfig, wrq->u.data.pointer, wrq->u.data.length);
-                pAdapter->CommonCfg.bEnableTxBurst = StaConfig.EnableTxBurst;
-                pAdapter->CommonCfg.UseBGProtection = StaConfig.UseBGProtection;
-                pAdapter->CommonCfg.bUseShortSlotTime = 1; // 2003-10-30 always SHORT SLOT capable
-                if ((pAdapter->CommonCfg.PhyMode != StaConfig.AdhocMode) &&
-					(StaConfig.AdhocMode <= MaxPhyMode))
-                {
-                    // allow dynamic change of "USE OFDM rate or not" in ADHOC mode
-                    // if setting changed, need to reset current TX rate as well as BEACON frame format
-                    if (pAdapter->StaCfg.BssType == BSS_ADHOC)
-                    {
-						pAdapter->CommonCfg.PhyMode = StaConfig.AdhocMode;
-                    	RTMPSetPhyMode(pAdapter, PhyMode);
-                        MlmeUpdateTxRates(pAdapter, FALSE, 0);
-                        MakeIbssBeacon(pAdapter);           // re-build BEACON frame
-                        AsicEnableIbssSync(pAdapter);   // copy to on-chip memory
-                    }
-                }
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_STA_CONFIG (Burst=%d, Protection=%ld,ShortSlot=%d\n",
-                                        pAdapter->CommonCfg.bEnableTxBurst,
-                                        pAdapter->CommonCfg.UseBGProtection,
-                                        pAdapter->CommonCfg.bUseShortSlotTime));
-            }
-            break;
-        case OID_802_11_DESIRED_RATES:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_RATES))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&aryRates, wrq->u.data.pointer, wrq->u.data.length);
-                NdisZeroMemory(pAdapter->CommonCfg.DesireRate, MAX_LEN_OF_SUPPORTED_RATES);
-                NdisMoveMemory(pAdapter->CommonCfg.DesireRate, &aryRates, sizeof(NDIS_802_11_RATES));
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_DESIRED_RATES (%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x)\n",
-                    pAdapter->CommonCfg.DesireRate[0],pAdapter->CommonCfg.DesireRate[1],
-                    pAdapter->CommonCfg.DesireRate[2],pAdapter->CommonCfg.DesireRate[3],
-                    pAdapter->CommonCfg.DesireRate[4],pAdapter->CommonCfg.DesireRate[5],
-                    pAdapter->CommonCfg.DesireRate[6],pAdapter->CommonCfg.DesireRate[7] ));
-                // Changing DesiredRate may affect the MAX TX rate we used to TX frames out
-                MlmeUpdateTxRates(pAdapter, FALSE, 0);
-            }
-            break;
-        case RT_OID_802_11_PREAMBLE:
-            if (wrq->u.data.length != sizeof(RT_802_11_PREAMBLE))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&Preamble, wrq->u.data.pointer, wrq->u.data.length);
-                if (Preamble == Rt802_11PreambleShort)
-                {
-                    pAdapter->CommonCfg.TxPreamble = Preamble;
-                    MlmeSetTxPreamble(pAdapter, Rt802_11PreambleShort);
-                }
-                else if ((Preamble == Rt802_11PreambleLong) || (Preamble == Rt802_11PreambleAuto))
-                {
-                    // if user wants AUTO, initialize to LONG here, then change according to AP's
-                    // capability upon association.
-                    pAdapter->CommonCfg.TxPreamble = Preamble;
-                    MlmeSetTxPreamble(pAdapter, Rt802_11PreambleLong);
-                }
-                else
-                {
-                    Status = -EINVAL;
-                    break;
-                }
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_PREAMBLE (=%d)\n", Preamble));
-            }
-            break;
-        case OID_802_11_WEP_STATUS:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_WEP_STATUS))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&WepStatus, wrq->u.data.pointer, wrq->u.data.length);
-                // Since TKIP, AES, WEP are all supported. It should not have any invalid setting
-                if (WepStatus <= Ndis802_11Encryption3KeyAbsent)
-                {
-                    if (pAdapter->StaCfg.WepStatus != WepStatus)
-                    {
-                        // Config has changed
-                        pAdapter->bConfigChanged = TRUE;
-                    }
-                    pAdapter->StaCfg.WepStatus     = WepStatus;
-                    pAdapter->StaCfg.OrigWepStatus = WepStatus;
-                    pAdapter->StaCfg.PairCipher    = WepStatus;
-                	pAdapter->StaCfg.GroupCipher   = WepStatus;
-                }
-                else
-                {
-                    Status  = -EINVAL;
-                    break;
-                }
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_WEP_STATUS (=%d)\n",WepStatus));
-            }
-            break;
-        case OID_802_11_AUTHENTICATION_MODE:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_AUTHENTICATION_MODE))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&AuthMode, wrq->u.data.pointer, wrq->u.data.length);
-                if (AuthMode > Ndis802_11AuthModeMax)
-                {
-                    Status  = -EINVAL;
-                    break;
-                }
-                else
-                {
-                    if (pAdapter->StaCfg.AuthMode != AuthMode)
-                    {
-                        // Config has changed
-                        pAdapter->bConfigChanged = TRUE;
-                    }
-                    pAdapter->StaCfg.AuthMode = AuthMode;
-                }
-                pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_AUTHENTICATION_MODE (=%d) \n",pAdapter->StaCfg.AuthMode));
-            }
-            break;
-        case OID_802_11_INFRASTRUCTURE_MODE:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_NETWORK_INFRASTRUCTURE))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&BssType, wrq->u.data.pointer, wrq->u.data.length);
-
-				if (BssType == Ndis802_11IBSS)
-					Set_NetworkType_Proc(pAdapter, "Adhoc");
-				else if (BssType == Ndis802_11Infrastructure)
-					Set_NetworkType_Proc(pAdapter, "Infra");
-				else if (BssType == Ndis802_11Monitor)
-					Set_NetworkType_Proc(pAdapter, "Monitor");
-				else
-				{
-					Status  = -EINVAL;
-					DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_INFRASTRUCTURE_MODE (unknown)\n"));
-				}
-			}
-			break;
-	 case OID_802_11_REMOVE_WEP:
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_WEP\n"));
-            if (wrq->u.data.length != sizeof(NDIS_802_11_KEY_INDEX))
-            {
-				Status = -EINVAL;
-            }
-            else
-            {
-				KeyIdx = *(NDIS_802_11_KEY_INDEX *) wrq->u.data.pointer;
-
-				if (KeyIdx & 0x80000000)
-				{
-					// Should never set default bit when remove key
-					Status = -EINVAL;
-				}
-				else
-				{
-					KeyIdx = KeyIdx & 0x0fffffff;
-					if (KeyIdx >= 4){
-						Status = -EINVAL;
-					}
-					else
-					{
-						pAdapter->SharedKey[BSS0][KeyIdx].KeyLen = 0;
-						pAdapter->SharedKey[BSS0][KeyIdx].CipherAlg = CIPHER_NONE;
-						AsicRemoveSharedKeyEntry(pAdapter, 0, (UCHAR)KeyIdx);
-					}
-				}
-            }
-            break;
-        case RT_OID_802_11_RESET_COUNTERS:
-            NdisZeroMemory(&pAdapter->WlanCounters, sizeof(COUNTER_802_11));
-            NdisZeroMemory(&pAdapter->Counters8023, sizeof(COUNTER_802_3));
-            NdisZeroMemory(&pAdapter->RalinkCounters, sizeof(COUNTER_RALINK));
-            pAdapter->Counters8023.RxNoBuffer   = 0;
-			pAdapter->Counters8023.GoodReceives = 0;
-			pAdapter->Counters8023.RxNoBuffer   = 0;
-#ifdef RT2870
-			pAdapter->BulkOutComplete	= 0;
-			pAdapter->BulkOutCompleteOther= 0;
-			pAdapter->BulkOutCompleteCancel = 0;
-			pAdapter->BulkOutReq = 0;
-			pAdapter->BulkInReq= 0;
-			pAdapter->BulkInComplete = 0;
-			pAdapter->BulkInCompleteFail = 0;
-#endif // RT2870 //
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_RESET_COUNTERS \n"));
-            break;
-        case OID_802_11_RTS_THRESHOLD:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_RTS_THRESHOLD))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&RtsThresh, wrq->u.data.pointer, wrq->u.data.length);
-                if (RtsThresh > MAX_RTS_THRESHOLD)
-                    Status  = -EINVAL;
-                else
-                    pAdapter->CommonCfg.RtsThreshold = (USHORT)RtsThresh;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_RTS_THRESHOLD (=%ld)\n",RtsThresh));
-            break;
-        case OID_802_11_FRAGMENTATION_THRESHOLD:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_FRAGMENTATION_THRESHOLD))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&FragThresh, wrq->u.data.pointer, wrq->u.data.length);
-                pAdapter->CommonCfg.bUseZeroToDisableFragment = FALSE;
-                if (FragThresh > MAX_FRAG_THRESHOLD || FragThresh < MIN_FRAG_THRESHOLD)
-                {
-                    if (FragThresh == 0)
-                    {
-                        pAdapter->CommonCfg.FragmentThreshold = MAX_FRAG_THRESHOLD;
-                        pAdapter->CommonCfg.bUseZeroToDisableFragment = TRUE;
-                    }
-                    else
-                        Status  = -EINVAL;
-                }
-                else
-                    pAdapter->CommonCfg.FragmentThreshold = (USHORT)FragThresh;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_FRAGMENTATION_THRESHOLD (=%ld) \n",FragThresh));
-            break;
-        case OID_802_11_POWER_MODE:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_POWER_MODE))
-                Status = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&PowerMode, wrq->u.data.pointer, wrq->u.data.length);
-                if (PowerMode == Ndis802_11PowerModeCAM)
-                	Set_PSMode_Proc(pAdapter, "CAM");
-                else if (PowerMode == Ndis802_11PowerModeMAX_PSP)
-                	Set_PSMode_Proc(pAdapter, "Max_PSP");
-                else if (PowerMode == Ndis802_11PowerModeFast_PSP)
-					Set_PSMode_Proc(pAdapter, "Fast_PSP");
-                else if (PowerMode == Ndis802_11PowerModeLegacy_PSP)
-					Set_PSMode_Proc(pAdapter, "Legacy_PSP");
-                else
-                    Status = -EINVAL;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_POWER_MODE (=%d)\n",PowerMode));
-            break;
-         case RT_OID_802_11_TX_POWER_LEVEL_1:
-			if (wrq->u.data.length  < sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&PowerTemp, wrq->u.data.pointer, wrq->u.data.length);
-				if (PowerTemp > 100)
-					PowerTemp = 0xffffffff;  // AUTO
-				pAdapter->CommonCfg.TxPowerDefault = PowerTemp; //keep current setting.
-					pAdapter->CommonCfg.TxPowerPercentage = pAdapter->CommonCfg.TxPowerDefault;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_TX_POWER_LEVEL_1 (=%ld)\n", pAdapter->CommonCfg.TxPowerPercentage));
-			}
-	        break;
-		case OID_802_11_NETWORK_TYPE_IN_USE:
-			if (wrq->u.data.length != sizeof(NDIS_802_11_NETWORK_TYPE))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&NetType, wrq->u.data.pointer, wrq->u.data.length);
-
-				if (NetType == Ndis802_11DS)
-					RTMPSetPhyMode(pAdapter, PHY_11B);
-				else if (NetType == Ndis802_11OFDM24)
-					RTMPSetPhyMode(pAdapter, PHY_11BG_MIXED);
-				else if (NetType == Ndis802_11OFDM5)
-					RTMPSetPhyMode(pAdapter, PHY_11A);
-				else
-					Status = -EINVAL;
-#ifdef DOT11_N_SUPPORT
-				if (Status == NDIS_STATUS_SUCCESS)
-					SetCommonHT(pAdapter);
-#endif // DOT11_N_SUPPORT //
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_NETWORK_TYPE_IN_USE (=%d)\n",NetType));
-		    }
-			break;
-        // For WPA PSK PMK key
-        case RT_OID_802_11_ADD_WPA:
-            pKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-            if(pKey == NULL)
-            {
-                Status = -ENOMEM;
-                break;
-            }
-
-            Status = copy_from_user(pKey, wrq->u.data.pointer, wrq->u.data.length);
-            if (pKey->Length != wrq->u.data.length)
-            {
-                Status  = -EINVAL;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_WPA, Failed!!\n"));
-            }
-            else
-            {
-                if ((pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPAPSK) &&
-				    (pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPA2PSK) &&
-				    (pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPANone) )
-                {
-                    Status = -EOPNOTSUPP;
-                    DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_WPA, Failed!! [AuthMode != WPAPSK/WPA2PSK/WPANONE]\n"));
-                }
-                else if ((pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
-						 (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK) ||
-						 (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPANone) )     // Only for WPA PSK mode
-				{
-                    NdisMoveMemory(pAdapter->StaCfg.PMK, &pKey->KeyMaterial, pKey->KeyLength);
-                    // Use RaConfig as PSK agent.
-                    // Start STA supplicant state machine
-                    if (pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPANone)
-                        pAdapter->StaCfg.WpaState = SS_START;
-
-                    DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_WPA (id=0x%x, Len=%d-byte)\n", pKey->KeyIndex, pKey->KeyLength));
-                }
-                else
-                {
-                    pAdapter->StaCfg.WpaState = SS_NOTUSE;
-                    DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_WPA (id=0x%x, Len=%d-byte)\n", pKey->KeyIndex, pKey->KeyLength));
-                }
-            }
-            kfree(pKey);
-            break;
-        case OID_802_11_REMOVE_KEY:
-            pRemoveKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-            if(pRemoveKey == NULL)
-            {
-                Status = -ENOMEM;
-                break;
-            }
-
-            Status = copy_from_user(pRemoveKey, wrq->u.data.pointer, wrq->u.data.length);
-            if (pRemoveKey->Length != wrq->u.data.length)
-            {
-                Status  = -EINVAL;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY, Failed!!\n"));
-            }
-            else
-            {
-                if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-                {
-                    RTMPWPARemoveKeyProc(pAdapter, pRemoveKey);
-                    DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY, Remove WPA Key!!\n"));
-                }
-                else
-                {
-                    KeyIdx = pRemoveKey->KeyIndex;
-
-                    if (KeyIdx & 0x80000000)
-                    {
-                        // Should never set default bit when remove key
-                        Status  = -EINVAL;
-                        DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY, Failed!!(Should never set default bit when remove key)\n"));
-                    }
-                    else
-                    {
-                        KeyIdx = KeyIdx & 0x0fffffff;
-                        if (KeyIdx > 3)
-                        {
-                            Status  = -EINVAL;
-                            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY, Failed!!(KeyId[%d] out of range)\n", KeyIdx));
-                        }
-                        else
-                        {
-                            pAdapter->SharedKey[BSS0][KeyIdx].KeyLen = 0;
-                            pAdapter->SharedKey[BSS0][KeyIdx].CipherAlg = CIPHER_NONE;
-                            AsicRemoveSharedKeyEntry(pAdapter, 0, (UCHAR)KeyIdx);
-                            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY (id=0x%x, Len=%d-byte)\n", pRemoveKey->KeyIndex, pRemoveKey->Length));
-                        }
-                    }
-                }
-            }
-            kfree(pRemoveKey);
-            break;
-        // New for WPA
-        case OID_802_11_ADD_KEY:
-            pKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-            if(pKey == NULL)
-            {
-                Status = -ENOMEM;
-                break;
-            }
-            Status = copy_from_user(pKey, wrq->u.data.pointer, wrq->u.data.length);
-            if (pKey->Length != wrq->u.data.length)
-            {
-                Status  = -EINVAL;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_KEY, Failed!!\n"));
-            }
-            else
-            {
-                RTMPAddKey(pAdapter, pKey);
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_KEY (id=0x%x, Len=%d-byte)\n", pKey->KeyIndex, pKey->KeyLength));
-            }
-            kfree(pKey);
-            break;
-        case OID_802_11_CONFIGURATION:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_CONFIGURATION))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&Config, wrq->u.data.pointer, wrq->u.data.length);
-                pConfig = &Config;
-
-                if ((pConfig->BeaconPeriod >= 20) && (pConfig->BeaconPeriod <=400))
-                     pAdapter->CommonCfg.BeaconPeriod = (USHORT) pConfig->BeaconPeriod;
-
-                pAdapter->StaActive.AtimWin = (USHORT) pConfig->ATIMWindow;
-                MAP_KHZ_TO_CHANNEL_ID(pConfig->DSConfig, pAdapter->CommonCfg.Channel);
-                //
-				// Save the channel on MlmeAux for CntlOidRTBssidProc used.
-				//
-				pAdapter->MlmeAux.Channel = pAdapter->CommonCfg.Channel;
-
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_CONFIGURATION (BeacnPeriod=%ld,AtimW=%ld,Ch=%d)\n",
-                    pConfig->BeaconPeriod, pConfig->ATIMWindow, pAdapter->CommonCfg.Channel));
-                // Config has changed
-                pAdapter->bConfigChanged = TRUE;
-            }
-            break;
-#ifdef DOT11_N_SUPPORT
-		case RT_OID_802_11_SET_HT_PHYMODE:
-			if (wrq->u.data.length	!= sizeof(OID_SET_HT_PHYMODE))
-				Status = -EINVAL;
-			else
-			{
-			    POID_SET_HT_PHYMODE	pHTPhyMode = &HT_PhyMode;
-
-				Status = copy_from_user(&HT_PhyMode, wrq->u.data.pointer, wrq->u.data.length);
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::pHTPhyMode	(PhyMode = %d,TransmitNo = %d, HtMode =	%d,	ExtOffset =	%d , MCS = %d, BW =	%d,	STBC = %d, SHORTGI = %d) \n",
-				pHTPhyMode->PhyMode, pHTPhyMode->TransmitNo,pHTPhyMode->HtMode,pHTPhyMode->ExtOffset,
-				pHTPhyMode->MCS, pHTPhyMode->BW, pHTPhyMode->STBC,	pHTPhyMode->SHORTGI));
-				if (pAdapter->CommonCfg.PhyMode	>= PHY_11ABGN_MIXED)
-					RTMPSetHT(pAdapter,	pHTPhyMode);
-			}
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_HT_PHYMODE(MCS=%d,BW=%d,SGI=%d,STBC=%d)\n",
-				pAdapter->StaCfg.HTPhyMode.field.MCS, pAdapter->StaCfg.HTPhyMode.field.BW, pAdapter->StaCfg.HTPhyMode.field.ShortGI,
-				pAdapter->StaCfg.HTPhyMode.field.STBC));
-			break;
-#endif // DOT11_N_SUPPORT //
-		case RT_OID_802_11_SET_APSD_SETTING:
-			if (wrq->u.data.length != sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				ULONG apsd ;
-				Status = copy_from_user(&apsd, wrq->u.data.pointer,	wrq->u.data.length);
-
-				/*-------------------------------------------------------------------
-				|B31~B7	|	B6~B5	 |	 B4	 |	 B3	 |	B2	 |	B1	 |	   B0		|
-				---------------------------------------------------------------------
-				| Rsvd	| Max SP Len | AC_VO | AC_VI | AC_BK | AC_BE | APSD	Capable	|
-				---------------------------------------------------------------------*/
-				pAdapter->CommonCfg.bAPSDCapable = (apsd & 0x00000001) ? TRUE :	FALSE;
-				pAdapter->CommonCfg.bAPSDAC_BE = ((apsd	& 0x00000002) >> 1)	? TRUE : FALSE;
-				pAdapter->CommonCfg.bAPSDAC_BK = ((apsd	& 0x00000004) >> 2)	? TRUE : FALSE;
-				pAdapter->CommonCfg.bAPSDAC_VI = ((apsd	& 0x00000008) >> 3)	? TRUE : FALSE;
-				pAdapter->CommonCfg.bAPSDAC_VO = ((apsd	& 0x00000010) >> 4)	? TRUE : FALSE;
-				pAdapter->CommonCfg.MaxSPLength	= (UCHAR)((apsd	& 0x00000060) >> 5);
-
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_APSD_SETTING (apsd=0x%lx, APSDCap=%d, [BE,BK,VI,VO]=[%d/%d/%d/%d],	MaxSPLen=%d)\n", apsd, pAdapter->CommonCfg.bAPSDCapable,
-					pAdapter->CommonCfg.bAPSDAC_BE,	pAdapter->CommonCfg.bAPSDAC_BK,	pAdapter->CommonCfg.bAPSDAC_VI,	pAdapter->CommonCfg.bAPSDAC_VO,	pAdapter->CommonCfg.MaxSPLength));
-			}
-			break;
-
-		case RT_OID_802_11_SET_APSD_PSM:
-			if (wrq->u.data.length	!= sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				// Driver needs	to notify AP when PSM changes
-				Status = copy_from_user(&pAdapter->CommonCfg.bAPSDForcePowerSave, wrq->u.data.pointer, wrq->u.data.length);
-				if (pAdapter->CommonCfg.bAPSDForcePowerSave	!= pAdapter->StaCfg.Psm)
-				{
-					MlmeSetPsmBit(pAdapter,	pAdapter->CommonCfg.bAPSDForcePowerSave);
-					RTMPSendNullFrame(pAdapter,	pAdapter->CommonCfg.TxRate,	TRUE);
-				}
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_APSD_PSM (bAPSDForcePowerSave:%d)\n",	pAdapter->CommonCfg.bAPSDForcePowerSave));
-			}
-			break;
-#ifdef QOS_DLS_SUPPORT
-		case RT_OID_802_11_SET_DLS:
-			if (wrq->u.data.length != sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				BOOLEAN	oldvalue = pAdapter->CommonCfg.bDLSCapable;
-				Status = copy_from_user(&pAdapter->CommonCfg.bDLSCapable, wrq->u.data.pointer, wrq->u.data.length);
-				if (oldvalue &&	!pAdapter->CommonCfg.bDLSCapable)
-				{
-					int	i;
-					// tear	down local dls table entry
-					for	(i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-					{
-						if (pAdapter->StaCfg.DLSEntry[i].Valid && (pAdapter->StaCfg.DLSEntry[i].Status == DLS_FINISH))
-						{
-							pAdapter->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-							pAdapter->StaCfg.DLSEntry[i].Valid	= FALSE;
-							RTMPSendDLSTearDownFrame(pAdapter, pAdapter->StaCfg.DLSEntry[i].MacAddr);
-						}
-					}
-
-					// tear	down peer dls table	entry
-					for	(i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
-					{
-						if (pAdapter->StaCfg.DLSEntry[i].Valid && (pAdapter->StaCfg.DLSEntry[i].Status == DLS_FINISH))
-						{
-							pAdapter->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-							pAdapter->StaCfg.DLSEntry[i].Valid	= FALSE;
-							RTMPSendDLSTearDownFrame(pAdapter, pAdapter->StaCfg.DLSEntry[i].MacAddr);
-						}
-					}
-				}
-
-				DBGPRINT(RT_DEBUG_TRACE,("Set::RT_OID_802_11_SET_DLS (=%d)\n", pAdapter->CommonCfg.bDLSCapable));
-			}
-			break;
-
-		case RT_OID_802_11_SET_DLS_PARAM:
-			if (wrq->u.data.length	!= sizeof(RT_802_11_DLS_UI))
-				Status = -EINVAL;
-			else
-			{
-				RT_802_11_DLS	Dls;
-
-				NdisZeroMemory(&Dls, sizeof(RT_802_11_DLS));
-				RTMPMoveMemory(&Dls, wrq->u.data.pointer, sizeof(RT_802_11_DLS_UI));
-				MlmeEnqueue(pAdapter,
-							MLME_CNTL_STATE_MACHINE,
-							RT_OID_802_11_SET_DLS_PARAM,
-							sizeof(RT_802_11_DLS),
-							&Dls);
-				DBGPRINT(RT_DEBUG_TRACE,("Set::RT_OID_802_11_SET_DLS_PARAM \n"));
-			}
-			break;
-#endif // QOS_DLS_SUPPORT //
-		case RT_OID_802_11_SET_WMM:
-			if (wrq->u.data.length	!= sizeof(BOOLEAN))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&pAdapter->CommonCfg.bWmmCapable, wrq->u.data.pointer, wrq->u.data.length);
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_WMM (=%d)	\n", pAdapter->CommonCfg.bWmmCapable));
-			}
-			break;
-
-		case OID_802_11_DISASSOCIATE:
-#ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				break;
-			}
-#endif // RALINK_ATE //
-			//
-			// Set NdisRadioStateOff to	TRUE, instead of called	MlmeRadioOff.
-			// Later on, NDIS_802_11_BSSID_LIST_EX->NumberOfItems should be	0
-			// when	query OID_802_11_BSSID_LIST.
-			//
-			// TRUE:  NumberOfItems	will set to	0.
-			// FALSE: NumberOfItems	no change.
-			//
-			pAdapter->CommonCfg.NdisRadioStateOff =	TRUE;
-			// Set to immediately send the media disconnect	event
-			pAdapter->MlmeAux.CurrReqIsFromNdis	= TRUE;
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_DISASSOCIATE	\n"));
-
-			if (INFRA_ON(pAdapter))
-			{
-				if (pAdapter->Mlme.CntlMachine.CurrState !=	CNTL_IDLE)
-				{
-					RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-					DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME	busy, reset	MLME state machine !!!\n"));
-				}
-
-				MlmeEnqueue(pAdapter,
-					MLME_CNTL_STATE_MACHINE,
-					OID_802_11_DISASSOCIATE,
-					0,
-					NULL);
-
-				StateMachineTouched	= TRUE;
-			}
-			break;
-
-#ifdef DOT11_N_SUPPORT
-		case RT_OID_802_11_SET_IMME_BA_CAP:
-				if (wrq->u.data.length != sizeof(OID_BACAP_STRUC))
-					Status = -EINVAL;
-				else
-				{
-					OID_BACAP_STRUC Orde ;
-					Status = copy_from_user(&Orde, wrq->u.data.pointer, wrq->u.data.length);
-					if (Orde.Policy > BA_NOTUSE)
-					{
-						Status = NDIS_STATUS_INVALID_DATA;
-					}
-					else if (Orde.Policy == BA_NOTUSE)
-					{
-						pAdapter->CommonCfg.BACapability.field.Policy = BA_NOTUSE;
-						pAdapter->CommonCfg.BACapability.field.MpduDensity = Orde.MpduDensity;
-						pAdapter->CommonCfg.DesiredHtPhy.MpduDensity = Orde.MpduDensity;
-						pAdapter->CommonCfg.DesiredHtPhy.AmsduEnable = Orde.AmsduEnable;
-						pAdapter->CommonCfg.DesiredHtPhy.AmsduSize= Orde.AmsduSize;
-						pAdapter->CommonCfg.DesiredHtPhy.MimoPs= Orde.MMPSmode;
-						pAdapter->CommonCfg.BACapability.field.MMPSmode = Orde.MMPSmode;
-						// UPdata to HT IE
-						pAdapter->CommonCfg.HtCapability.HtCapInfo.MimoPs = Orde.MMPSmode;
-						pAdapter->CommonCfg.HtCapability.HtCapInfo.AMsduSize = Orde.AmsduSize;
-						pAdapter->CommonCfg.HtCapability.HtCapParm.MpduDensity = Orde.MpduDensity;
-					}
-					else
-					{
-                        pAdapter->CommonCfg.BACapability.field.AutoBA = Orde.AutoBA;
-						pAdapter->CommonCfg.BACapability.field.Policy = IMMED_BA; // we only support immediate BA.
-						pAdapter->CommonCfg.BACapability.field.MpduDensity = Orde.MpduDensity;
-						pAdapter->CommonCfg.DesiredHtPhy.MpduDensity = Orde.MpduDensity;
-						pAdapter->CommonCfg.DesiredHtPhy.AmsduEnable = Orde.AmsduEnable;
-						pAdapter->CommonCfg.DesiredHtPhy.AmsduSize= Orde.AmsduSize;
-						pAdapter->CommonCfg.DesiredHtPhy.MimoPs = Orde.MMPSmode;
-						pAdapter->CommonCfg.BACapability.field.MMPSmode = Orde.MMPSmode;
-
-						// UPdata to HT IE
-						pAdapter->CommonCfg.HtCapability.HtCapInfo.MimoPs = Orde.MMPSmode;
-						pAdapter->CommonCfg.HtCapability.HtCapInfo.AMsduSize = Orde.AmsduSize;
-						pAdapter->CommonCfg.HtCapability.HtCapParm.MpduDensity = Orde.MpduDensity;
-
-						if (pAdapter->CommonCfg.BACapability.field.RxBAWinLimit > MAX_RX_REORDERBUF)
-							pAdapter->CommonCfg.BACapability.field.RxBAWinLimit = MAX_RX_REORDERBUF;
-
-					}
-
-					pAdapter->CommonCfg.REGBACapability.word = pAdapter->CommonCfg.BACapability.word;
-					DBGPRINT(RT_DEBUG_TRACE, ("Set::(Orde.AutoBA = %d) (Policy=%d)(ReBAWinLimit=%d)(TxBAWinLimit=%d)(AutoMode=%d)\n",Orde.AutoBA, pAdapter->CommonCfg.BACapability.field.Policy,
-						pAdapter->CommonCfg.BACapability.field.RxBAWinLimit,pAdapter->CommonCfg.BACapability.field.TxBAWinLimit, pAdapter->CommonCfg.BACapability.field.AutoBA));
-					DBGPRINT(RT_DEBUG_TRACE, ("Set::(MimoPs = %d)(AmsduEnable = %d) (AmsduSize=%d)(MpduDensity=%d)\n",pAdapter->CommonCfg.DesiredHtPhy.MimoPs, pAdapter->CommonCfg.DesiredHtPhy.AmsduEnable,
-						pAdapter->CommonCfg.DesiredHtPhy.AmsduSize, pAdapter->CommonCfg.DesiredHtPhy.MpduDensity));
-				}
-
-				break;
-		case RT_OID_802_11_ADD_IMME_BA:
-			DBGPRINT(RT_DEBUG_TRACE, (" Set :: RT_OID_802_11_ADD_IMME_BA \n"));
-			if (wrq->u.data.length != sizeof(OID_ADD_BA_ENTRY))
-					Status = -EINVAL;
-			else
-			{
-				UCHAR		        index;
-				OID_ADD_BA_ENTRY    BA;
-				MAC_TABLE_ENTRY     *pEntry;
-
-				Status = copy_from_user(&BA, wrq->u.data.pointer, wrq->u.data.length);
-				if (BA.TID > 15)
-				{
-					Status = NDIS_STATUS_INVALID_DATA;
-					break;
-				}
-				else
-				{
-					//BATableInsertEntry
-					//As ad-hoc mode, BA pair is not limited to only BSSID. so add via OID.
-					index = BA.TID;
-					// in ad hoc mode, when adding BA pair, we should insert this entry into MACEntry too
-					pEntry = MacTableLookup(pAdapter, BA.MACAddr);
-					if (!pEntry)
-					{
-						DBGPRINT(RT_DEBUG_TRACE, ("RT_OID_802_11_ADD_IMME_BA. break on no connection.----:%x:%x\n", BA.MACAddr[4], BA.MACAddr[5]));
-						break;
-					}
-					if (BA.IsRecipient == FALSE)
-					{
-					    if (pEntry->bIAmBadAtheros == TRUE)
-							pAdapter->CommonCfg.BACapability.field.RxBAWinLimit = 0x10;
-
-						BAOriSessionSetUp(pAdapter, pEntry, index, 0, 100, TRUE);
-					}
-					else
-					{
-						//BATableInsertEntry(pAdapter, pEntry->Aid, BA.MACAddr, 0, 0xffff, BA.TID, BA.nMSDU, BA.IsRecipient);
-					}
-
-					DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_IMME_BA. Rec = %d. Mac = %x:%x:%x:%x:%x:%x . \n",
-						BA.IsRecipient, BA.MACAddr[0], BA.MACAddr[1], BA.MACAddr[2], BA.MACAddr[2]
-						, BA.MACAddr[4], BA.MACAddr[5]));
-				}
-			}
-			break;
-
-		case RT_OID_802_11_TEAR_IMME_BA:
-			DBGPRINT(RT_DEBUG_TRACE, ("Set :: RT_OID_802_11_TEAR_IMME_BA \n"));
-			if (wrq->u.data.length != sizeof(OID_ADD_BA_ENTRY))
-					Status = -EINVAL;
-			else
-			{
-				POID_ADD_BA_ENTRY	pBA;
-				MAC_TABLE_ENTRY *pEntry;
-
-				pBA = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-
-				if (pBA == NULL)
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("Set :: RT_OID_802_11_TEAR_IMME_BA kmalloc() can't allocate enough memory\n"));
-					Status = NDIS_STATUS_FAILURE;
-				}
-				else
-				{
-					Status = copy_from_user(pBA, wrq->u.data.pointer, wrq->u.data.length);
-					DBGPRINT(RT_DEBUG_TRACE, ("Set :: RT_OID_802_11_TEAR_IMME_BA(TID=%d, bAllTid=%d)\n", pBA->TID, pBA->bAllTid));
-
-					if (!pBA->bAllTid && (pBA->TID > NUM_OF_TID))
-					{
-						Status = NDIS_STATUS_INVALID_DATA;
-						break;
-					}
-
-					if (pBA->IsRecipient == FALSE)
-					{
-						pEntry = MacTableLookup(pAdapter, pBA->MACAddr);
-						DBGPRINT(RT_DEBUG_TRACE, (" pBA->IsRecipient == FALSE\n"));
-						if (pEntry)
-						{
-							DBGPRINT(RT_DEBUG_TRACE, (" pBA->pEntry\n"));
-							BAOriSessionTearDown(pAdapter, pEntry->Aid, pBA->TID, FALSE, TRUE);
-						}
-						else
-							DBGPRINT(RT_DEBUG_TRACE, ("Set :: Not found pEntry \n"));
-					}
-					else
-					{
-						pEntry = MacTableLookup(pAdapter, pBA->MACAddr);
-						if (pEntry)
-						{
-							BARecSessionTearDown( pAdapter, (UCHAR)pEntry->Aid, pBA->TID, TRUE);
-						}
-						else
-							DBGPRINT(RT_DEBUG_TRACE, ("Set :: Not found pEntry \n"));
-					}
-					kfree(pBA);
-				}
-            }
-            break;
-#endif // DOT11_N_SUPPORT //
-
-        // For WPA_SUPPLICANT to set static wep key
-    	case OID_802_11_ADD_WEP:
-    	    pWepKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-
-    	    if(pWepKey == NULL)
-            {
-                Status = -ENOMEM;
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP, Failed!!\n"));
-                break;
-            }
-            Status = copy_from_user(pWepKey, wrq->u.data.pointer, wrq->u.data.length);
-            if (Status)
-            {
-                Status  = -EINVAL;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP, Failed (length mismatch)!!\n"));
-            }
-            else
-            {
-		        KeyIdx = pWepKey->KeyIndex & 0x0fffffff;
-                // KeyIdx must be 0 ~ 3
-                if (KeyIdx > 4)
-    			{
-                    Status  = -EINVAL;
-                    DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP, Failed (KeyIdx must be smaller than 4)!!\n"));
-                }
-                else
-                {
-                    UCHAR CipherAlg = 0;
-                    PUCHAR Key;
-
-                    // set key material and key length
-                    NdisZeroMemory(pAdapter->SharedKey[BSS0][KeyIdx].Key, 16);
-                    pAdapter->SharedKey[BSS0][KeyIdx].KeyLen = (UCHAR) pWepKey->KeyLength;
-                    NdisMoveMemory(pAdapter->SharedKey[BSS0][KeyIdx].Key, &pWepKey->KeyMaterial, pWepKey->KeyLength);
-
-                    switch(pWepKey->KeyLength)
-                    {
-                        case 5:
-                            CipherAlg = CIPHER_WEP64;
-                            break;
-                        case 13:
-                            CipherAlg = CIPHER_WEP128;
-                            break;
-                        default:
-                            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP, only support CIPHER_WEP64(len:5) & CIPHER_WEP128(len:13)!!\n"));
-                            Status = -EINVAL;
-                            break;
-                    }
-                    pAdapter->SharedKey[BSS0][KeyIdx].CipherAlg = CipherAlg;
-
-                    // Default key for tx (shared key)
-                    if (pWepKey->KeyIndex & 0x80000000)
-                    {
-#ifdef WPA_SUPPLICANT_SUPPORT
-                        // set key material and key length
-                        NdisZeroMemory(pAdapter->StaCfg.DesireSharedKey[KeyIdx].Key, 16);
-                        pAdapter->StaCfg.DesireSharedKey[KeyIdx].KeyLen = (UCHAR) pWepKey->KeyLength;
-                        NdisMoveMemory(pAdapter->StaCfg.DesireSharedKey[KeyIdx].Key, &pWepKey->KeyMaterial, pWepKey->KeyLength);
-                        pAdapter->StaCfg.DesireSharedKeyId = KeyIdx;
-                        pAdapter->StaCfg.DesireSharedKey[KeyIdx].CipherAlg = CipherAlg;
-#endif // WPA_SUPPLICANT_SUPPORT //
-                        pAdapter->StaCfg.DefaultKeyId = (UCHAR) KeyIdx;
-                    }
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-					if ((pAdapter->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE) &&
-						(pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA))
-					{
-						Key = pWepKey->KeyMaterial;
-
-						// Set Group key material to Asic
-    					AsicAddSharedKeyEntry(pAdapter, BSS0, KeyIdx, CipherAlg, Key, NULL, NULL);
-
-						// Update WCID attribute table and IVEIV table for this group key table
-						RTMPAddWcidAttributeEntry(pAdapter, BSS0, KeyIdx, CipherAlg, NULL);
-
-						STA_PORT_SECURED(pAdapter);
-
-        				// Indicate Connected for GUI
-        				pAdapter->IndicateMediaState = NdisMediaStateConnected;
-					}
-                    else if (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED)
-#endif // WPA_SUPPLICANT_SUPPORT
-                    {
-                        Key = pAdapter->SharedKey[BSS0][KeyIdx].Key;
-
-                        // Set key material and cipherAlg to Asic
-        				AsicAddSharedKeyEntry(pAdapter, BSS0, KeyIdx, CipherAlg, Key, NULL, NULL);
-
-                        if (pWepKey->KeyIndex & 0x80000000)
-                        {
-                            PMAC_TABLE_ENTRY pEntry = &pAdapter->MacTab.Content[BSSID_WCID];
-                            // Assign group key info
-    						RTMPAddWcidAttributeEntry(pAdapter, BSS0, KeyIdx, CipherAlg, NULL);
-    						// Assign pairwise key info
-    						RTMPAddWcidAttributeEntry(pAdapter, BSS0, KeyIdx, CipherAlg, pEntry);
-                        }
-                    }
-					DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP (id=0x%x, Len=%d-byte), %s\n", pWepKey->KeyIndex, pWepKey->KeyLength, (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED) ? "Port Secured":"Port NOT Secured"));
-				}
-            }
-            kfree(pWepKey);
-            break;
-#ifdef WPA_SUPPLICANT_SUPPORT
-	    case OID_SET_COUNTERMEASURES:
-            if (wrq->u.data.length != sizeof(int))
-                Status  = -EINVAL;
-            else
-            {
-                int enabled = 0;
-                Status = copy_from_user(&enabled, wrq->u.data.pointer, wrq->u.data.length);
-                if (enabled == 1)
-                    pAdapter->StaCfg.bBlockAssoc = TRUE;
-                else
-                    // WPA MIC error should block association attempt for 60 seconds
-                    pAdapter->StaCfg.bBlockAssoc = FALSE;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_SET_COUNTERMEASURES bBlockAssoc=%s\n", pAdapter->StaCfg.bBlockAssoc ? "TRUE":"FALSE"));
-            }
-	        break;
-        case RT_OID_WPA_SUPPLICANT_SUPPORT:
-			if (wrq->u.data.length != sizeof(UCHAR))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&wpa_supplicant_enable, wrq->u.data.pointer, wrq->u.data.length);
-    			pAdapter->StaCfg.WpaSupplicantUP = wpa_supplicant_enable;
-    			DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_WPA_SUPPLICANT_SUPPORT (=%d)\n", pAdapter->StaCfg.WpaSupplicantUP));
-			}
-            break;
-        case OID_802_11_DEAUTHENTICATION:
-            if (wrq->u.data.length != sizeof(MLME_DEAUTH_REQ_STRUCT))
-                Status  = -EINVAL;
-            else
-            {
-                MLME_DEAUTH_REQ_STRUCT      *pInfo;
-				MLME_QUEUE_ELEM *MsgElem = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);
-
-                pInfo = (MLME_DEAUTH_REQ_STRUCT *) MsgElem->Msg;
-                Status = copy_from_user(pInfo, wrq->u.data.pointer, wrq->u.data.length);
-                MlmeDeauthReqAction(pAdapter, MsgElem);
-				kfree(MsgElem);
-
-                if (INFRA_ON(pAdapter))
-                {
-                    LinkDown(pAdapter, FALSE);
-                    pAdapter->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-                }
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_DEAUTHENTICATION (Reason=%d)\n", pInfo->Reason));
-            }
-            break;
-        case OID_802_11_DROP_UNENCRYPTED:
-            if (wrq->u.data.length != sizeof(int))
-                Status  = -EINVAL;
-            else
-            {
-                int enabled = 0;
-                Status = copy_from_user(&enabled, wrq->u.data.pointer, wrq->u.data.length);
-                if (enabled == 1)
-                    pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-                else
-                    pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-				NdisAcquireSpinLock(&pAdapter->MacTabLock);
-				pAdapter->MacTab.Content[BSSID_WCID].PortSecured = pAdapter->StaCfg.PortSecured;
-				NdisReleaseSpinLock(&pAdapter->MacTabLock);
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_DROP_UNENCRYPTED (=%d)\n", enabled));
-            }
-            break;
-        case OID_802_11_SET_IEEE8021X:
-            if (wrq->u.data.length != sizeof(BOOLEAN))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&IEEE8021xState, wrq->u.data.pointer, wrq->u.data.length);
-		        pAdapter->StaCfg.IEEE8021X = IEEE8021xState;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_SET_IEEE8021X (=%d)\n", IEEE8021xState));
-            }
-            break;
-        case OID_802_11_SET_IEEE8021X_REQUIRE_KEY:
-			if (wrq->u.data.length != sizeof(BOOLEAN))
-				 Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&IEEE8021x_required_keys, wrq->u.data.pointer, wrq->u.data.length);
-				pAdapter->StaCfg.IEEE8021x_required_keys = IEEE8021x_required_keys;
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_SET_IEEE8021X_REQUIRE_KEY (%d)\n", IEEE8021x_required_keys));
-			}
-			break;
-        case OID_802_11_PMKID:
-	        pPmkId = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-
-	        if(pPmkId == NULL) {
-                Status = -ENOMEM;
-                break;
-            }
-            Status = copy_from_user(pPmkId, wrq->u.data.pointer, wrq->u.data.length);
-
-	        // check the PMKID information
-	        if (pPmkId->BSSIDInfoCount == 0)
-                NdisZeroMemory(pAdapter->StaCfg.SavedPMK, sizeof(BSSID_INFO)*PMKID_NO);
-	        else
-	        {
-		        PBSSID_INFO	pBssIdInfo;
-		        UINT		BssIdx;
-		        UINT		CachedIdx;
-
-		        for (BssIdx = 0; BssIdx < pPmkId->BSSIDInfoCount; BssIdx++)
-		        {
-			        // point to the indexed BSSID_INFO structure
-			        pBssIdInfo = (PBSSID_INFO) ((PUCHAR) pPmkId + 2 * sizeof(UINT) + BssIdx * sizeof(BSSID_INFO));
-			        // Find the entry in the saved data base.
-			        for (CachedIdx = 0; CachedIdx < pAdapter->StaCfg.SavedPMKNum; CachedIdx++)
-			        {
-				        // compare the BSSID
-				        if (NdisEqualMemory(pBssIdInfo->BSSID, pAdapter->StaCfg.SavedPMK[CachedIdx].BSSID, sizeof(NDIS_802_11_MAC_ADDRESS)))
-					        break;
-			        }
-
-			        // Found, replace it
-			        if (CachedIdx < PMKID_NO)
-			        {
-				        DBGPRINT(RT_DEBUG_OFF, ("Update OID_802_11_PMKID, idx = %d\n", CachedIdx));
-				        NdisMoveMemory(&pAdapter->StaCfg.SavedPMK[CachedIdx], pBssIdInfo, sizeof(BSSID_INFO));
-				        pAdapter->StaCfg.SavedPMKNum++;
-			        }
-			        // Not found, replace the last one
-			        else
-			        {
-				        // Randomly replace one
-				        CachedIdx = (pBssIdInfo->BSSID[5] % PMKID_NO);
-				        DBGPRINT(RT_DEBUG_OFF, ("Update OID_802_11_PMKID, idx = %d\n", CachedIdx));
-				        NdisMoveMemory(&pAdapter->StaCfg.SavedPMK[CachedIdx], pBssIdInfo, sizeof(BSSID_INFO));
-			        }
-		        }
-			}
-			if(pPmkId)
-				kfree(pPmkId);
-	        break;
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-
-
-#ifdef SNMP_SUPPORT
-		case OID_802_11_SHORTRETRYLIMIT:
-			if (wrq->u.data.length != sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&ShortRetryLimit, wrq->u.data.pointer, wrq->u.data.length);
-				RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
-				tx_rty_cfg.field.ShortRtyLimit = ShortRetryLimit;
-				RTMP_IO_WRITE32(pAdapter, TX_RTY_CFG, tx_rty_cfg.word);
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_SHORTRETRYLIMIT (tx_rty_cfg.field.ShortRetryLimit=%d, ShortRetryLimit=%ld)\n", tx_rty_cfg.field.ShortRtyLimit, ShortRetryLimit));
-			}
-			break;
-
-		case OID_802_11_LONGRETRYLIMIT:
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_LONGRETRYLIMIT \n"));
-			if (wrq->u.data.length != sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&LongRetryLimit, wrq->u.data.pointer, wrq->u.data.length);
-				RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
-				tx_rty_cfg.field.LongRtyLimit = LongRetryLimit;
-				RTMP_IO_WRITE32(pAdapter, TX_RTY_CFG, tx_rty_cfg.word);
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_LONGRETRYLIMIT (tx_rty_cfg.field.LongRetryLimit= %d,LongRetryLimit=%ld)\n", tx_rty_cfg.field.LongRtyLimit, LongRetryLimit));
-			}
-			break;
-
-		case OID_802_11_WEPDEFAULTKEYVALUE:
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_WEPDEFAULTKEYVALUE\n"));
-			pKey = kmalloc(wrq->u.data.length, GFP_KERNEL);
-			Status = copy_from_user(pKey, wrq->u.data.pointer, wrq->u.data.length);
-			//pKey = &WepKey;
-
-			if ( pKey->Length != wrq->u.data.length)
-			{
-				Status = -EINVAL;
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_WEPDEFAULTKEYVALUE, Failed!!\n"));
-			}
-			KeyIdx = pKey->KeyIndex & 0x0fffffff;
-			DBGPRINT(RT_DEBUG_TRACE,("pKey->KeyIndex =%d, pKey->KeyLength=%d\n", pKey->KeyIndex, pKey->KeyLength));
-
-			// it is a shared key
-			if (KeyIdx > 4)
-				Status = -EINVAL;
-			else
-			{
-				pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen = (UCHAR) pKey->KeyLength;
-				NdisMoveMemory(&pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].Key, &pKey->KeyMaterial, pKey->KeyLength);
-				if (pKey->KeyIndex & 0x80000000)
-				{
-					// Default key for tx (shared key)
-					pAdapter->StaCfg.DefaultKeyId = (UCHAR) KeyIdx;
-				}
-				//RestartAPIsRequired = TRUE;
-			}
-			break;
-
-
-		case OID_802_11_WEPDEFAULTKEYID:
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_WEPDEFAULTKEYID \n"));
-
-			if (wrq->u.data.length != sizeof(UCHAR))
-				Status = -EINVAL;
-			else
-				Status = copy_from_user(&pAdapter->StaCfg.DefaultKeyId, wrq->u.data.pointer, wrq->u.data.length);
-
-			break;
-
-
-		case OID_802_11_CURRENTCHANNEL:
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_CURRENTCHANNEL \n"));
-			if (wrq->u.data.length != sizeof(UCHAR))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&ctmp, wrq->u.data.pointer, wrq->u.data.length);
-				sprintf(&ctmp,"%d", ctmp);
-				Set_Channel_Proc(pAdapter, &ctmp);
-			}
-			break;
-#endif
-
-
-
-        default:
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::unknown IOCTL's subcmd = 0x%08x\n", cmd));
-            Status = -EOPNOTSUPP;
-            break;
-    }
-
-
-    return Status;
-}
-
-INT RTMPQueryInformation(
-    IN  PRTMP_ADAPTER pAdapter,
-    IN  OUT struct ifreq    *rq,
-    IN  INT                 cmd)
-{
-    struct iwreq                        *wrq = (struct iwreq *) rq;
-    NDIS_802_11_BSSID_LIST_EX           *pBssidList = NULL;
-    PNDIS_WLAN_BSSID_EX                 pBss;
-    NDIS_802_11_SSID                    Ssid;
-    NDIS_802_11_CONFIGURATION           *pConfiguration = NULL;
-    RT_802_11_LINK_STATUS               *pLinkStatus = NULL;
-    RT_802_11_STA_CONFIG                *pStaConfig = NULL;
-    NDIS_802_11_STATISTICS              *pStatistics = NULL;
-    NDIS_802_11_RTS_THRESHOLD           RtsThresh;
-    NDIS_802_11_FRAGMENTATION_THRESHOLD FragThresh;
-    NDIS_802_11_POWER_MODE              PowerMode;
-    NDIS_802_11_NETWORK_INFRASTRUCTURE  BssType;
-    RT_802_11_PREAMBLE                  PreamType;
-    NDIS_802_11_AUTHENTICATION_MODE     AuthMode;
-    NDIS_802_11_WEP_STATUS              WepStatus;
-    NDIS_MEDIA_STATE                    MediaState;
-    ULONG                               BssBufSize, ulInfo=0, NetworkTypeList[4], apsd = 0;
-    USHORT                              BssLen = 0;
-    PUCHAR                              pBuf = NULL, pPtr;
-    INT                                 Status = NDIS_STATUS_SUCCESS;
-    UINT                                we_version_compiled;
-    UCHAR                               i, Padding = 0;
-    BOOLEAN                             RadioState;
-	UCHAR	driverVersion[8];
-    OID_SET_HT_PHYMODE			        *pHTPhyMode = NULL;
-
-
-#ifdef SNMP_SUPPORT
-	//for snmp, kathy
-	DefaultKeyIdxValue			*pKeyIdxValue;
-	INT							valueLen;
-	TX_RTY_CFG_STRUC			tx_rty_cfg;
-	ULONG						ShortRetryLimit, LongRetryLimit;
-	UCHAR						tmp[64];
-#endif //SNMP
-
-    switch(cmd)
-    {
-        case RT_OID_DEVICE_NAME:
-            wrq->u.data.length = sizeof(STA_NIC_DEVICE_NAME);
-            Status = copy_to_user(wrq->u.data.pointer, STA_NIC_DEVICE_NAME, wrq->u.data.length);
-            break;
-        case RT_OID_VERSION_INFO:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_VERSION_INFO \n"));
-			wrq->u.data.length = 8*sizeof(UCHAR);
-			sprintf(&driverVersion[0], "%s", STA_DRIVER_VERSION);
-			driverVersion[7] = '\0';
-			if (copy_to_user(wrq->u.data.pointer, &driverVersion, wrq->u.data.length))
-            {
-				Status = -EFAULT;
-            }
-            break;
-#ifdef RALINK_ATE
-		case RT_QUERY_ATE_TXDONE_COUNT:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_QUERY_ATE_TXDONE_COUNT \n"));
-			wrq->u.data.length = sizeof(UINT32);
-			if (copy_to_user(wrq->u.data.pointer, &pAdapter->ate.TxDoneCount, wrq->u.data.length))
-			{
-				Status = -EFAULT;
-			}
-			break;
-#endif // RALINK_ATE //
-        case OID_802_11_BSSID_LIST:
-            if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-            {
-            	/*
-            	 * Still scanning, indicate the caller should try again.
-            	 */
-            	DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_BSSID_LIST (Still scanning)\n"));
-				return -EAGAIN;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_BSSID_LIST (%d BSS returned)\n",pAdapter->ScanTab.BssNr));
-			pAdapter->StaCfg.bScanReqIsFromWebUI = FALSE;
-            // Claculate total buffer size required
-            BssBufSize = sizeof(ULONG);
-
-            for (i = 0; i < pAdapter->ScanTab.BssNr; i++)
-            {
-                // Align pointer to 4 bytes boundary.
-                //Padding = 4 - (pAdapter->ScanTab.BssEntry[i].VarIELen & 0x0003);
-                //if (Padding == 4)
-                //    Padding = 0;
-                BssBufSize += (sizeof(NDIS_WLAN_BSSID_EX) - 1 + sizeof(NDIS_802_11_FIXED_IEs) + pAdapter->ScanTab.BssEntry[i].VarIELen + Padding);
-            }
-
-            // For safety issue, we add 256 bytes just in case
-            BssBufSize += 256;
-            // Allocate the same size as passed from higher layer
-            pBuf = kmalloc(BssBufSize, MEM_ALLOC_FLAG);
-            if(pBuf == NULL)
-            {
-                Status = -ENOMEM;
-                break;
-            }
-            // Init 802_11_BSSID_LIST_EX structure
-            NdisZeroMemory(pBuf, BssBufSize);
-            pBssidList = (PNDIS_802_11_BSSID_LIST_EX) pBuf;
-            pBssidList->NumberOfItems = pAdapter->ScanTab.BssNr;
-
-            // Calculate total buffer length
-            BssLen = 4; // Consist of NumberOfItems
-            // Point to start of NDIS_WLAN_BSSID_EX
-            // pPtr = pBuf + sizeof(ULONG);
-            pPtr = (PUCHAR) &pBssidList->Bssid[0];
-            for (i = 0; i < pAdapter->ScanTab.BssNr; i++)
-            {
-                pBss = (PNDIS_WLAN_BSSID_EX) pPtr;
-                NdisMoveMemory(&pBss->MacAddress, &pAdapter->ScanTab.BssEntry[i].Bssid, MAC_ADDR_LEN);
-                if ((pAdapter->ScanTab.BssEntry[i].Hidden == 1) && (pAdapter->StaCfg.bShowHiddenSSID == FALSE))
-                {
-                    //
-					// We must return this SSID during 4way handshaking, otherwise Aegis will failed to parse WPA infomation
-					// and then failed to send EAPOl farame.
-					//
-					if ((pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA) && (pAdapter->StaCfg.PortSecured != WPA_802_1X_PORT_SECURED))
-					{
-						pBss->Ssid.SsidLength = pAdapter->ScanTab.BssEntry[i].SsidLen;
-						NdisMoveMemory(pBss->Ssid.Ssid, pAdapter->ScanTab.BssEntry[i].Ssid, pAdapter->ScanTab.BssEntry[i].SsidLen);
-					}
-					else
-                    	pBss->Ssid.SsidLength = 0;
-                }
-                else
-                {
-                    pBss->Ssid.SsidLength = pAdapter->ScanTab.BssEntry[i].SsidLen;
-                    NdisMoveMemory(pBss->Ssid.Ssid, pAdapter->ScanTab.BssEntry[i].Ssid, pAdapter->ScanTab.BssEntry[i].SsidLen);
-                }
-                pBss->Privacy = pAdapter->ScanTab.BssEntry[i].Privacy;
-                pBss->Rssi = pAdapter->ScanTab.BssEntry[i].Rssi - pAdapter->BbpRssiToDbmDelta;
-                pBss->NetworkTypeInUse = NetworkTypeInUseSanity(&pAdapter->ScanTab.BssEntry[i]);
-                pBss->Configuration.Length = sizeof(NDIS_802_11_CONFIGURATION);
-                pBss->Configuration.BeaconPeriod = pAdapter->ScanTab.BssEntry[i].BeaconPeriod;
-                pBss->Configuration.ATIMWindow = pAdapter->ScanTab.BssEntry[i].AtimWin;
-
-                MAP_CHANNEL_ID_TO_KHZ(pAdapter->ScanTab.BssEntry[i].Channel, pBss->Configuration.DSConfig);
-
-                if (pAdapter->ScanTab.BssEntry[i].BssType == BSS_INFRA)
-                    pBss->InfrastructureMode = Ndis802_11Infrastructure;
-                else
-                    pBss->InfrastructureMode = Ndis802_11IBSS;
-
-                NdisMoveMemory(pBss->SupportedRates, pAdapter->ScanTab.BssEntry[i].SupRate, pAdapter->ScanTab.BssEntry[i].SupRateLen);
-                NdisMoveMemory(pBss->SupportedRates + pAdapter->ScanTab.BssEntry[i].SupRateLen,
-                               pAdapter->ScanTab.BssEntry[i].ExtRate,
-                               pAdapter->ScanTab.BssEntry[i].ExtRateLen);
-
-                if (pAdapter->ScanTab.BssEntry[i].VarIELen == 0)
-                {
-                    pBss->IELength = sizeof(NDIS_802_11_FIXED_IEs);
-                    NdisMoveMemory(pBss->IEs, &pAdapter->ScanTab.BssEntry[i].FixIEs, sizeof(NDIS_802_11_FIXED_IEs));
-                    pPtr = pPtr + sizeof(NDIS_WLAN_BSSID_EX) - 1 + sizeof(NDIS_802_11_FIXED_IEs);
-                }
-                else
-                {
-                    pBss->IELength = (ULONG)(sizeof(NDIS_802_11_FIXED_IEs) + pAdapter->ScanTab.BssEntry[i].VarIELen);
-                    pPtr = pPtr + sizeof(NDIS_WLAN_BSSID_EX) - 1 + sizeof(NDIS_802_11_FIXED_IEs);
-                    NdisMoveMemory(pBss->IEs, &pAdapter->ScanTab.BssEntry[i].FixIEs, sizeof(NDIS_802_11_FIXED_IEs));
-                    NdisMoveMemory(pBss->IEs + sizeof(NDIS_802_11_FIXED_IEs), pAdapter->ScanTab.BssEntry[i].VarIEs, pAdapter->ScanTab.BssEntry[i].VarIELen);
-                    pPtr += pAdapter->ScanTab.BssEntry[i].VarIELen;
-                }
-                pBss->Length = (ULONG)(sizeof(NDIS_WLAN_BSSID_EX) - 1 + sizeof(NDIS_802_11_FIXED_IEs) + pAdapter->ScanTab.BssEntry[i].VarIELen + Padding);
-
-#if WIRELESS_EXT < 17
-                if ((BssLen + pBss->Length) < wrq->u.data.length)
-                BssLen += pBss->Length;
-                else
-                {
-                    pBssidList->NumberOfItems = i;
-                    break;
-                }
-#else
-                BssLen += pBss->Length;
-#endif
-            }
-
-#if WIRELESS_EXT < 17
-            wrq->u.data.length = BssLen;
-#else
-            if (BssLen > wrq->u.data.length)
-            {
-                kfree(pBssidList);
-                return -E2BIG;
-            }
-            else
-                wrq->u.data.length = BssLen;
-#endif
-            Status = copy_to_user(wrq->u.data.pointer, pBssidList, BssLen);
-            kfree(pBssidList);
-            break;
-        case OID_802_3_CURRENT_ADDRESS:
-            wrq->u.data.length = MAC_ADDR_LEN;
-            Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CurrentAddress, wrq->u.data.length);
-            break;
-        case OID_GEN_MEDIA_CONNECT_STATUS:
-            if (pAdapter->IndicateMediaState == NdisMediaStateConnected)
-                MediaState = NdisMediaStateConnected;
-            else
-                MediaState = NdisMediaStateDisconnected;
-
-            wrq->u.data.length = sizeof(NDIS_MEDIA_STATE);
-            Status = copy_to_user(wrq->u.data.pointer, &MediaState, wrq->u.data.length);
-            break;
-        case OID_802_11_BSSID:
-#ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				Status = NDIS_STATUS_RESOURCES;
-				break;
-			}
-#endif // RALINK_ATE //
-            if (INFRA_ON(pAdapter) || ADHOC_ON(pAdapter))
-            {
-                Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.Bssid, sizeof(NDIS_802_11_MAC_ADDRESS));
-
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_BSSID(=EMPTY)\n"));
-                Status = -ENOTCONN;
-            }
-            break;
-        case OID_802_11_SSID:
-			NdisZeroMemory(&Ssid, sizeof(NDIS_802_11_SSID));
-			NdisZeroMemory(Ssid.Ssid, MAX_LEN_OF_SSID);
-            Ssid.SsidLength = pAdapter->CommonCfg.SsidLen;
-			memcpy(Ssid.Ssid, pAdapter->CommonCfg.Ssid,	Ssid.SsidLength);
-            wrq->u.data.length = sizeof(NDIS_802_11_SSID);
-            Status = copy_to_user(wrq->u.data.pointer, &Ssid, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_SSID (Len=%d, ssid=%s)\n", Ssid.SsidLength,Ssid.Ssid));
-            break;
-        case RT_OID_802_11_QUERY_LINK_STATUS:
-            pLinkStatus = (RT_802_11_LINK_STATUS *) kmalloc(sizeof(RT_802_11_LINK_STATUS), MEM_ALLOC_FLAG);
-            if (pLinkStatus)
-            {
-                pLinkStatus->CurrTxRate = RateIdTo500Kbps[pAdapter->CommonCfg.TxRate];   // unit : 500 kbps
-                pLinkStatus->ChannelQuality = pAdapter->Mlme.ChannelQuality;
-                pLinkStatus->RxByteCount = pAdapter->RalinkCounters.ReceivedByteCount;
-                pLinkStatus->TxByteCount = pAdapter->RalinkCounters.TransmittedByteCount;
-        		pLinkStatus->CentralChannel = pAdapter->CommonCfg.CentralChannel;
-                wrq->u.data.length = sizeof(RT_802_11_LINK_STATUS);
-                Status = copy_to_user(wrq->u.data.pointer, pLinkStatus, wrq->u.data.length);
-                kfree(pLinkStatus);
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_LINK_STATUS\n"));
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_LINK_STATUS(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-        case OID_802_11_CONFIGURATION:
-            pConfiguration = (NDIS_802_11_CONFIGURATION *) kmalloc(sizeof(NDIS_802_11_CONFIGURATION), MEM_ALLOC_FLAG);
-            if (pConfiguration)
-            {
-                pConfiguration->Length = sizeof(NDIS_802_11_CONFIGURATION);
-                pConfiguration->BeaconPeriod = pAdapter->CommonCfg.BeaconPeriod;
-                pConfiguration->ATIMWindow = pAdapter->StaActive.AtimWin;
-                MAP_CHANNEL_ID_TO_KHZ(pAdapter->CommonCfg.Channel, pConfiguration->DSConfig);
-                wrq->u.data.length = sizeof(NDIS_802_11_CONFIGURATION);
-                Status = copy_to_user(wrq->u.data.pointer, pConfiguration, wrq->u.data.length);
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_CONFIGURATION(BeaconPeriod=%ld,AtimW=%ld,Channel=%d) \n",
-                                        pConfiguration->BeaconPeriod, pConfiguration->ATIMWindow, pAdapter->CommonCfg.Channel));
-				kfree(pConfiguration);
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_CONFIGURATION(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-		case RT_OID_802_11_SNR_0:
-			if ((pAdapter->StaCfg.LastSNR0 > 0))
-			{
-				ulInfo = ((0xeb	- pAdapter->StaCfg.LastSNR0) * 3) /	16 ;
-				wrq->u.data.length = sizeof(ulInfo);
-				Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-				DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_SNR_0(0x=%lx)\n", ulInfo));
-			}
-            else
-			    Status = -EFAULT;
-			break;
-		case RT_OID_802_11_SNR_1:
-			if ((pAdapter->Antenna.field.RxPath	> 1) &&
-                (pAdapter->StaCfg.LastSNR1 > 0))
-			{
-				ulInfo = ((0xeb	- pAdapter->StaCfg.LastSNR1) * 3) /	16 ;
-				wrq->u.data.length = sizeof(ulInfo);
-				Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-				DBGPRINT(RT_DEBUG_TRACE,("Query::RT_OID_802_11_SNR_1(0x=%lx)\n",ulInfo));
-			}
-			else
-				Status = -EFAULT;
-            DBGPRINT(RT_DEBUG_TRACE,("Query::RT_OID_802_11_SNR_1(pAdapter->StaCfg.LastSNR1=%d)\n",pAdapter->StaCfg.LastSNR1));
-			break;
-        case OID_802_11_RSSI_TRIGGER:
-            ulInfo = pAdapter->StaCfg.RssiSample.LastRssi0 - pAdapter->BbpRssiToDbmDelta;
-            wrq->u.data.length = sizeof(ulInfo);
-            Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_RSSI_TRIGGER(=%ld)\n", ulInfo));
-            break;
-		case OID_802_11_RSSI:
-        case RT_OID_802_11_RSSI:
-			ulInfo = pAdapter->StaCfg.RssiSample.LastRssi0;
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-			break;
-		case RT_OID_802_11_RSSI_1:
-            ulInfo = pAdapter->StaCfg.RssiSample.LastRssi1;
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-			break;
-        case RT_OID_802_11_RSSI_2:
-            ulInfo = pAdapter->StaCfg.RssiSample.LastRssi2;
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-			break;
-        case OID_802_11_STATISTICS:
-            pStatistics = (NDIS_802_11_STATISTICS *) kmalloc(sizeof(NDIS_802_11_STATISTICS), MEM_ALLOC_FLAG);
-            if (pStatistics)
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_STATISTICS \n"));
-                // add the most up-to-date h/w raw counters into software counters
-			    NICUpdateRawCounters(pAdapter);
-
-                // Sanity check for calculation of sucessful count
-                if (pAdapter->WlanCounters.TransmittedFragmentCount.QuadPart < pAdapter->WlanCounters.RetryCount.QuadPart)
-                    pAdapter->WlanCounters.TransmittedFragmentCount.QuadPart = pAdapter->WlanCounters.RetryCount.QuadPart;
-
-                pStatistics->TransmittedFragmentCount.QuadPart = pAdapter->WlanCounters.TransmittedFragmentCount.QuadPart;
-                pStatistics->MulticastTransmittedFrameCount.QuadPart = pAdapter->WlanCounters.MulticastTransmittedFrameCount.QuadPart;
-                pStatistics->FailedCount.QuadPart = pAdapter->WlanCounters.FailedCount.QuadPart;
-                pStatistics->RetryCount.QuadPart = pAdapter->WlanCounters.RetryCount.QuadPart;
-                pStatistics->MultipleRetryCount.QuadPart = pAdapter->WlanCounters.MultipleRetryCount.QuadPart;
-                pStatistics->RTSSuccessCount.QuadPart = pAdapter->WlanCounters.RTSSuccessCount.QuadPart;
-                pStatistics->RTSFailureCount.QuadPart = pAdapter->WlanCounters.RTSFailureCount.QuadPart;
-                pStatistics->ACKFailureCount.QuadPart = pAdapter->WlanCounters.ACKFailureCount.QuadPart;
-                pStatistics->FrameDuplicateCount.QuadPart = pAdapter->WlanCounters.FrameDuplicateCount.QuadPart;
-                pStatistics->ReceivedFragmentCount.QuadPart = pAdapter->WlanCounters.ReceivedFragmentCount.QuadPart;
-                pStatistics->MulticastReceivedFrameCount.QuadPart = pAdapter->WlanCounters.MulticastReceivedFrameCount.QuadPart;
-#ifdef DBG
-                pStatistics->FCSErrorCount = pAdapter->RalinkCounters.RealFcsErrCount;
-#else
-                pStatistics->FCSErrorCount.QuadPart = pAdapter->WlanCounters.FCSErrorCount.QuadPart;
-                pStatistics->FrameDuplicateCount.u.LowPart = pAdapter->WlanCounters.FrameDuplicateCount.u.LowPart / 100;
-#endif
-                wrq->u.data.length = sizeof(NDIS_802_11_STATISTICS);
-                Status = copy_to_user(wrq->u.data.pointer, pStatistics, wrq->u.data.length);
-                kfree(pStatistics);
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_STATISTICS(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-        case OID_GEN_RCV_OK:
-            ulInfo = pAdapter->Counters8023.GoodReceives;
-            wrq->u.data.length = sizeof(ulInfo);
-            Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-            break;
-        case OID_GEN_RCV_NO_BUFFER:
-            ulInfo = pAdapter->Counters8023.RxNoBuffer;
-            wrq->u.data.length = sizeof(ulInfo);
-            Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-            break;
-        case RT_OID_802_11_PHY_MODE:
-            ulInfo = (ULONG)pAdapter->CommonCfg.PhyMode;
-            wrq->u.data.length = sizeof(ulInfo);
-            Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_PHY_MODE (=%ld)\n", ulInfo));
-            break;
-        case RT_OID_802_11_STA_CONFIG:
-            pStaConfig = (RT_802_11_STA_CONFIG *) kmalloc(sizeof(RT_802_11_STA_CONFIG), MEM_ALLOC_FLAG);
-            if (pStaConfig)
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_STA_CONFIG\n"));
-                pStaConfig->EnableTxBurst = pAdapter->CommonCfg.bEnableTxBurst;
-                pStaConfig->EnableTurboRate = 0;
-                pStaConfig->UseBGProtection = pAdapter->CommonCfg.UseBGProtection;
-                pStaConfig->UseShortSlotTime = pAdapter->CommonCfg.bUseShortSlotTime;
-                //pStaConfig->AdhocMode = pAdapter->StaCfg.AdhocMode;
-                pStaConfig->HwRadioStatus = (pAdapter->StaCfg.bHwRadio == TRUE) ? 1 : 0;
-                pStaConfig->Rsv1 = 0;
-                pStaConfig->SystemErrorBitmap = pAdapter->SystemErrorBitmap;
-                wrq->u.data.length = sizeof(RT_802_11_STA_CONFIG);
-                Status = copy_to_user(wrq->u.data.pointer, pStaConfig, wrq->u.data.length);
-                kfree(pStaConfig);
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_STA_CONFIG(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-        case OID_802_11_RTS_THRESHOLD:
-            RtsThresh = pAdapter->CommonCfg.RtsThreshold;
-            wrq->u.data.length = sizeof(RtsThresh);
-            Status = copy_to_user(wrq->u.data.pointer, &RtsThresh, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_RTS_THRESHOLD(=%ld)\n", RtsThresh));
-            break;
-        case OID_802_11_FRAGMENTATION_THRESHOLD:
-            FragThresh = pAdapter->CommonCfg.FragmentThreshold;
-            if (pAdapter->CommonCfg.bUseZeroToDisableFragment == TRUE)
-                FragThresh = 0;
-            wrq->u.data.length = sizeof(FragThresh);
-            Status = copy_to_user(wrq->u.data.pointer, &FragThresh, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_FRAGMENTATION_THRESHOLD(=%ld)\n", FragThresh));
-            break;
-        case OID_802_11_POWER_MODE:
-            PowerMode = pAdapter->StaCfg.WindowsPowerMode;
-            wrq->u.data.length = sizeof(PowerMode);
-            Status = copy_to_user(wrq->u.data.pointer, &PowerMode, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_POWER_MODE(=%d)\n", PowerMode));
-            break;
-        case RT_OID_802_11_RADIO:
-            RadioState = (BOOLEAN) pAdapter->StaCfg.bSwRadio;
-            wrq->u.data.length = sizeof(RadioState);
-            Status = copy_to_user(wrq->u.data.pointer, &RadioState, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_RADIO (=%d)\n", RadioState));
-            break;
-        case OID_802_11_INFRASTRUCTURE_MODE:
-            if (pAdapter->StaCfg.BssType == BSS_ADHOC)
-                BssType = Ndis802_11IBSS;
-            else if (pAdapter->StaCfg.BssType == BSS_INFRA)
-                BssType = Ndis802_11Infrastructure;
-            else if (pAdapter->StaCfg.BssType == BSS_MONITOR)
-                BssType = Ndis802_11Monitor;
-            else
-                BssType = Ndis802_11AutoUnknown;
-
-            wrq->u.data.length = sizeof(BssType);
-            Status = copy_to_user(wrq->u.data.pointer, &BssType, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_INFRASTRUCTURE_MODE(=%d)\n", BssType));
-            break;
-        case RT_OID_802_11_PREAMBLE:
-            PreamType = pAdapter->CommonCfg.TxPreamble;
-            wrq->u.data.length = sizeof(PreamType);
-            Status = copy_to_user(wrq->u.data.pointer, &PreamType, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_PREAMBLE(=%d)\n", PreamType));
-            break;
-        case OID_802_11_AUTHENTICATION_MODE:
-            AuthMode = pAdapter->StaCfg.AuthMode;
-            wrq->u.data.length = sizeof(AuthMode);
-            Status = copy_to_user(wrq->u.data.pointer, &AuthMode, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_AUTHENTICATION_MODE(=%d)\n", AuthMode));
-            break;
-        case OID_802_11_WEP_STATUS:
-            WepStatus = pAdapter->StaCfg.WepStatus;
-            wrq->u.data.length = sizeof(WepStatus);
-            Status = copy_to_user(wrq->u.data.pointer, &WepStatus, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_WEP_STATUS(=%d)\n", WepStatus));
-            break;
-        case OID_802_11_TX_POWER_LEVEL:
-			wrq->u.data.length = sizeof(ULONG);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.TxPower, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_TX_POWER_LEVEL %x\n",pAdapter->CommonCfg.TxPower));
-			break;
-        case RT_OID_802_11_TX_POWER_LEVEL_1:
-            wrq->u.data.length = sizeof(ULONG);
-            Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.TxPowerPercentage, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_TX_POWER_LEVEL_1 (=%ld)\n", pAdapter->CommonCfg.TxPowerPercentage));
-			break;
-        case OID_802_11_NETWORK_TYPES_SUPPORTED:
-			if ((pAdapter->RfIcType	== RFIC_2850) || (pAdapter->RfIcType ==	RFIC_2750))
-			{
-				NetworkTypeList[0] = 3;                 // NumberOfItems = 3
-				NetworkTypeList[1] = Ndis802_11DS;      // NetworkType[1] = 11b
-				NetworkTypeList[2] = Ndis802_11OFDM24;  // NetworkType[2] = 11g
-				NetworkTypeList[3] = Ndis802_11OFDM5;   // NetworkType[3] = 11a
-                wrq->u.data.length = 16;
-				Status = copy_to_user(wrq->u.data.pointer, &NetworkTypeList[0], wrq->u.data.length);
-			}
-			else
-			{
-				NetworkTypeList[0] = 2;                 // NumberOfItems = 2
-				NetworkTypeList[1] = Ndis802_11DS;      // NetworkType[1] = 11b
-				NetworkTypeList[2] = Ndis802_11OFDM24;  // NetworkType[2] = 11g
-			    wrq->u.data.length = 12;
-				Status = copy_to_user(wrq->u.data.pointer, &NetworkTypeList[0], wrq->u.data.length);
-			}
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_NETWORK_TYPES_SUPPORTED\n"));
-				break;
-	    case OID_802_11_NETWORK_TYPE_IN_USE:
-            wrq->u.data.length = sizeof(ULONG);
-			if (pAdapter->CommonCfg.PhyMode == PHY_11A)
-				ulInfo = Ndis802_11OFDM5;
-			else if ((pAdapter->CommonCfg.PhyMode == PHY_11BG_MIXED) || (pAdapter->CommonCfg.PhyMode == PHY_11G))
-				ulInfo = Ndis802_11OFDM24;
-			else
-				ulInfo = Ndis802_11DS;
-            Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-			break;
-        case RT_OID_802_11_QUERY_LAST_RX_RATE:
-            ulInfo = (ULONG)pAdapter->LastRxRate;
-            wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_LAST_RX_RATE (=%ld)\n", ulInfo));
-			break;
-		case RT_OID_802_11_QUERY_LAST_TX_RATE:
-			//ulInfo = (ULONG)pAdapter->LastTxRate;
-			ulInfo = (ULONG)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.word;
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_LAST_TX_RATE (=%lx)\n", ulInfo));
-			break;
-        case RT_OID_802_11_QUERY_EEPROM_VERSION:
-            wrq->u.data.length = sizeof(ULONG);
-            Status = copy_to_user(wrq->u.data.pointer, &pAdapter->EepromVersion, wrq->u.data.length);
-            break;
-        case RT_OID_802_11_QUERY_FIRMWARE_VERSION:
-            wrq->u.data.length = sizeof(ULONG);
-            Status = copy_to_user(wrq->u.data.pointer, &pAdapter->FirmwareVersion, wrq->u.data.length);
-			break;
-	    case RT_OID_802_11_QUERY_NOISE_LEVEL:
-			wrq->u.data.length = sizeof(UCHAR);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->BbpWriteLatch[66], wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_NOISE_LEVEL (=%d)\n", pAdapter->BbpWriteLatch[66]));
-			break;
-	    case RT_OID_802_11_EXTRA_INFO:
-			wrq->u.data.length = sizeof(ULONG);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->ExtraInfo, wrq->u.data.length);
-	        DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_EXTRA_INFO (=%ld)\n", pAdapter->ExtraInfo));
-	        break;
-	    case RT_OID_WE_VERSION_COMPILED:
-	        wrq->u.data.length = sizeof(UINT);
-	        we_version_compiled = WIRELESS_EXT;
-	        Status = copy_to_user(wrq->u.data.pointer, &we_version_compiled, wrq->u.data.length);
-	        break;
-		case RT_OID_802_11_QUERY_APSD_SETTING:
-			apsd = (pAdapter->CommonCfg.bAPSDCapable | (pAdapter->CommonCfg.bAPSDAC_BE << 1) | (pAdapter->CommonCfg.bAPSDAC_BK << 2)
-				| (pAdapter->CommonCfg.bAPSDAC_VI << 3)	| (pAdapter->CommonCfg.bAPSDAC_VO << 4)	| (pAdapter->CommonCfg.MaxSPLength << 5));
-
-			wrq->u.data.length = sizeof(ULONG);
-			Status = copy_to_user(wrq->u.data.pointer, &apsd, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_APSD_SETTING (=0x%lx,APSDCap=%d,AC_BE=%d,AC_BK=%d,AC_VI=%d,AC_VO=%d,MAXSPLen=%d)\n",
-				apsd,pAdapter->CommonCfg.bAPSDCapable,pAdapter->CommonCfg.bAPSDAC_BE,pAdapter->CommonCfg.bAPSDAC_BK,pAdapter->CommonCfg.bAPSDAC_VI,pAdapter->CommonCfg.bAPSDAC_VO,pAdapter->CommonCfg.MaxSPLength));
-			break;
-		case RT_OID_802_11_QUERY_APSD_PSM:
-			wrq->u.data.length = sizeof(ULONG);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.bAPSDForcePowerSave, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_APSD_PSM (=%d)\n", pAdapter->CommonCfg.bAPSDForcePowerSave));
-			break;
-		case RT_OID_802_11_QUERY_WMM:
-			wrq->u.data.length = sizeof(BOOLEAN);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.bWmmCapable, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_WMM (=%d)\n",	pAdapter->CommonCfg.bWmmCapable));
-			break;
-#ifdef WPA_SUPPLICANT_SUPPORT
-        case RT_OID_NEW_DRIVER:
-            {
-                UCHAR enabled = 1;
-    	        wrq->u.data.length = sizeof(UCHAR);
-    	        Status = copy_to_user(wrq->u.data.pointer, &enabled, wrq->u.data.length);
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_NEW_DRIVER (=%d)\n", enabled));
-            }
-	        break;
-        case RT_OID_WPA_SUPPLICANT_SUPPORT:
-	        wrq->u.data.length = sizeof(UCHAR);
-	        Status = copy_to_user(wrq->u.data.pointer, &pAdapter->StaCfg.WpaSupplicantUP, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_WPA_SUPPLICANT_SUPPORT (=%d)\n", pAdapter->StaCfg.WpaSupplicantUP));
-	        break;
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-        case RT_OID_DRIVER_DEVICE_NAME:
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_DRIVER_DEVICE_NAME \n"));
-			wrq->u.data.length = 16;
-			if (copy_to_user(wrq->u.data.pointer, pAdapter->StaCfg.dev_name, wrq->u.data.length))
-			{
-				Status = -EFAULT;
-			}
-            break;
-        case RT_OID_802_11_QUERY_HT_PHYMODE:
-            pHTPhyMode = (OID_SET_HT_PHYMODE *) kmalloc(sizeof(OID_SET_HT_PHYMODE), MEM_ALLOC_FLAG);
-            if (pHTPhyMode)
-            {
-                pHTPhyMode->PhyMode = pAdapter->CommonCfg.PhyMode;
-    			pHTPhyMode->HtMode = (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE;
-    			pHTPhyMode->BW = (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.BW;
-    			pHTPhyMode->MCS= (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.MCS;
-    			pHTPhyMode->SHORTGI= (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.ShortGI;
-    			pHTPhyMode->STBC= (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.STBC;
-
-    			pHTPhyMode->ExtOffset = ((pAdapter->CommonCfg.CentralChannel < pAdapter->CommonCfg.Channel) ? (EXTCHA_BELOW) : (EXTCHA_ABOVE));
-                wrq->u.data.length = sizeof(OID_SET_HT_PHYMODE);
-                if (copy_to_user(wrq->u.data.pointer, pHTPhyMode, wrq->u.data.length))
-    			{
-    				Status = -EFAULT;
-    			}
-    			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_HT_PHYMODE (PhyMode = %d, MCS =%d, BW = %d, STBC = %d, ExtOffset=%d)\n",
-    				pHTPhyMode->HtMode, pHTPhyMode->MCS, pHTPhyMode->BW, pHTPhyMode->STBC, pHTPhyMode->ExtOffset));
-    			DBGPRINT(RT_DEBUG_TRACE, (" MlmeUpdateTxRates (.word = %x )\n", pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.word));
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_STA_CONFIG(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-        case RT_OID_802_11_COUNTRY_REGION:
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_COUNTRY_REGION \n"));
-			wrq->u.data.length = sizeof(ulInfo);
-            ulInfo = pAdapter->CommonCfg.CountryRegionForABand;
-            ulInfo = (ulInfo << 8)|(pAdapter->CommonCfg.CountryRegion);
-			if (copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length))
-            {
-				Status = -EFAULT;
-            }
-            break;
-        case RT_OID_802_11_QUERY_DAT_HT_PHYMODE:
-            pHTPhyMode = (OID_SET_HT_PHYMODE *) kmalloc(sizeof(OID_SET_HT_PHYMODE), MEM_ALLOC_FLAG);
-            if (pHTPhyMode)
-            {
-                pHTPhyMode->PhyMode = pAdapter->CommonCfg.PhyMode;
-    			pHTPhyMode->HtMode = (UCHAR)pAdapter->CommonCfg.RegTransmitSetting.field.HTMODE;
-    			pHTPhyMode->BW = (UCHAR)pAdapter->CommonCfg.RegTransmitSetting.field.BW;
-    			pHTPhyMode->MCS= (UCHAR)pAdapter->StaCfg.DesiredTransmitSetting.field.MCS;
-    			pHTPhyMode->SHORTGI= (UCHAR)pAdapter->CommonCfg.RegTransmitSetting.field.ShortGI;
-    			pHTPhyMode->STBC= (UCHAR)pAdapter->CommonCfg.RegTransmitSetting.field.STBC;
-
-                wrq->u.data.length = sizeof(OID_SET_HT_PHYMODE);
-                if (copy_to_user(wrq->u.data.pointer, pHTPhyMode, wrq->u.data.length))
-    			{
-    				Status = -EFAULT;
-    			}
-    			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_HT_PHYMODE (PhyMode = %d, MCS =%d, BW = %d, STBC = %d, ExtOffset=%d)\n",
-    				pHTPhyMode->HtMode, pHTPhyMode->MCS, pHTPhyMode->BW, pHTPhyMode->STBC, pHTPhyMode->ExtOffset));
-    			DBGPRINT(RT_DEBUG_TRACE, (" MlmeUpdateTxRates (.word = %x )\n", pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.word));
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_STA_CONFIG(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-        case RT_OID_QUERY_MULTIPLE_CARD_SUPPORT:
-			wrq->u.data.length = sizeof(UCHAR);
-            i = 0;
-#ifdef MULTIPLE_CARD_SUPPORT
-            i = 1;
-#endif // MULTIPLE_CARD_SUPPORT //
-			if (copy_to_user(wrq->u.data.pointer, &i, wrq->u.data.length))
-            {
-				Status = -EFAULT;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_QUERY_MULTIPLE_CARD_SUPPORT(=%d) \n", i));
-            break;
-#ifdef SNMP_SUPPORT
-		case RT_OID_802_11_MAC_ADDRESS:
-            wrq->u.data.length = MAC_ADDR_LEN;
-            Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CurrentAddress, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_MANUFACTUREROUI:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_MANUFACTUREROUI \n"));
-			wrq->u.data.length = ManufacturerOUI_LEN;
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CurrentAddress, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_MANUFACTURERNAME:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_MANUFACTURERNAME \n"));
-			wrq->u.data.length = strlen(ManufacturerNAME);
-			Status = copy_to_user(wrq->u.data.pointer, ManufacturerNAME, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_RESOURCETYPEIDNAME:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_RESOURCETYPEIDNAME \n"));
-			wrq->u.data.length = strlen(ResourceTypeIdName);
-			Status = copy_to_user(wrq->u.data.pointer, ResourceTypeIdName, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_PRIVACYOPTIONIMPLEMENTED:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_PRIVACYOPTIONIMPLEMENTED \n"));
-			ulInfo = 1; // 1 is support wep else 2 is not support.
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_POWERMANAGEMENTMODE:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_POWERMANAGEMENTMODE \n"));
-			if (pAdapter->StaCfg.Psm == PSMP_ACTION)
-				ulInfo = 1; // 1 is power active else 2 is power save.
-			else
-				ulInfo = 2;
-
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-			break;
-
-		case OID_802_11_WEPDEFAULTKEYVALUE:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_WEPDEFAULTKEYVALUE \n"));
-			//KeyIdxValue.KeyIdx = pAd->PortCfg.MBSSID[pAd->IoctlIF].DefaultKeyId;
-			pKeyIdxValue = wrq->u.data.pointer;
-			DBGPRINT(RT_DEBUG_TRACE,("KeyIdxValue.KeyIdx = %d, \n",pKeyIdxValue->KeyIdx));
-			valueLen = pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen;
-			NdisMoveMemory(pKeyIdxValue->Value,
-						   &pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].Key,
-						   valueLen);
-			pKeyIdxValue->Value[valueLen]='\0';
-
-			wrq->u.data.length = sizeof(DefaultKeyIdxValue);
-
-			Status = copy_to_user(wrq->u.data.pointer, pKeyIdxValue, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE,("DefaultKeyId = %d, total len = %d, str len=%d, KeyValue= %02x %02x %02x %02x \n", pAdapter->StaCfg.DefaultKeyId, wrq->u.data.length, pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen,
-			pAdapter->SharedKey[BSS0][0].Key[0],
-			pAdapter->SharedKey[BSS0][1].Key[0],
-			pAdapter->SharedKey[BSS0][2].Key[0],
-			pAdapter->SharedKey[BSS0][3].Key[0]));
-			break;
-
-		case OID_802_11_WEPDEFAULTKEYID:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_WEPDEFAULTKEYID \n"));
-			wrq->u.data.length = sizeof(UCHAR);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->StaCfg.DefaultKeyId, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("DefaultKeyId =%d \n", pAdapter->StaCfg.DefaultKeyId));
-			break;
-
-		case RT_OID_802_11_WEPKEYMAPPINGLENGTH:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_WEPKEYMAPPINGLENGTH \n"));
-			wrq->u.data.length = sizeof(UCHAR);
-			Status = copy_to_user(wrq->u.data.pointer,
-									&pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen,
-									wrq->u.data.length);
-			break;
-
-		case OID_802_11_SHORTRETRYLIMIT:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_SHORTRETRYLIMIT \n"));
-			wrq->u.data.length = sizeof(ULONG);
-			RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
-			ShortRetryLimit = tx_rty_cfg.field.ShortRtyLimit;
-			DBGPRINT(RT_DEBUG_TRACE, ("ShortRetryLimit =%ld,  tx_rty_cfg.field.ShortRetryLimit=%d\n", ShortRetryLimit, tx_rty_cfg.field.ShortRtyLimit));
-			Status = copy_to_user(wrq->u.data.pointer, &ShortRetryLimit, wrq->u.data.length);
-			break;
-
-		case OID_802_11_LONGRETRYLIMIT:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_LONGRETRYLIMIT \n"));
-			wrq->u.data.length = sizeof(ULONG);
-			RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
-			LongRetryLimit = tx_rty_cfg.field.LongRtyLimit;
-			DBGPRINT(RT_DEBUG_TRACE, ("LongRetryLimit =%ld,  tx_rty_cfg.field.LongRtyLimit=%d\n", LongRetryLimit, tx_rty_cfg.field.LongRtyLimit));
-			Status = copy_to_user(wrq->u.data.pointer, &LongRetryLimit, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_PRODUCTID:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_PRODUCTID \n"));
-
-#ifdef RT2870
-			sprintf(tmp, "%04x %04x\n", ((POS_COOKIE)pAdapter->OS_Cookie)->pUsb_Dev->descriptor.idVendor ,((POS_COOKIE)pAdapter->OS_Cookie)->pUsb_Dev->descriptor.idProduct);
-
-#endif // RT2870 //
-			wrq->u.data.length = strlen(tmp);
-			Status = copy_to_user(wrq->u.data.pointer, tmp, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_MANUFACTUREID:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_MANUFACTUREID \n"));
-			wrq->u.data.length = strlen(ManufacturerNAME);
-			Status = copy_to_user(wrq->u.data.pointer, ManufacturerNAME, wrq->u.data.length);
-			break;
-
-		case OID_802_11_CURRENTCHANNEL:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_CURRENTCHANNEL \n"));
-			wrq->u.data.length = sizeof(UCHAR);
-			DBGPRINT(RT_DEBUG_TRACE, ("sizeof UCHAR=%d, channel=%d \n", sizeof(UCHAR), pAdapter->CommonCfg.Channel));
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.Channel, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
-			break;
-#endif //SNMP_SUPPORT
-
-		case OID_802_11_BUILD_CHANNEL_EX:
-			{
-				UCHAR value;
-				DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_BUILD_CHANNEL_EX \n"));
-				wrq->u.data.length = sizeof(UCHAR);
-#ifdef EXT_BUILD_CHANNEL_LIST
-				DBGPRINT(RT_DEBUG_TRACE, ("Support EXT_BUILD_CHANNEL_LIST.\n"));
-				value = 1;
-#else
-				DBGPRINT(RT_DEBUG_TRACE, ("Doesn't support EXT_BUILD_CHANNEL_LIST.\n"));
-				value = 0;
-#endif // EXT_BUILD_CHANNEL_LIST //
-				Status = copy_to_user(wrq->u.data.pointer, &value, 1);
-				DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
-			}
-			break;
-
-		case OID_802_11_GET_CH_LIST:
-			{
-				PRT_CHANNEL_LIST_INFO pChListBuf;
-
-				DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_GET_CH_LIST \n"));
-				if (pAdapter->ChannelListNum == 0)
-				{
-					wrq->u.data.length = 0;
-					break;
-				}
-
-				pChListBuf = (RT_CHANNEL_LIST_INFO *) kmalloc(sizeof(RT_CHANNEL_LIST_INFO), MEM_ALLOC_FLAG);
-				if (pChListBuf == NULL)
-				{
-					wrq->u.data.length = 0;
-					break;
-				}
-
-				pChListBuf->ChannelListNum = pAdapter->ChannelListNum;
-				for (i = 0; i < pChListBuf->ChannelListNum; i++)
-					pChListBuf->ChannelList[i] = pAdapter->ChannelList[i].Channel;
-
-				wrq->u.data.length = sizeof(RT_CHANNEL_LIST_INFO);
-				Status = copy_to_user(wrq->u.data.pointer, pChListBuf, sizeof(RT_CHANNEL_LIST_INFO));
-				DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
-
-				if (pChListBuf)
-					kfree(pChListBuf);
-			}
-			break;
-
-		case OID_802_11_GET_COUNTRY_CODE:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_GET_COUNTRY_CODE \n"));
-			wrq->u.data.length = 2;
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.CountryCode, 2);
-			DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
-			break;
-
-		case OID_802_11_GET_CHANNEL_GEOGRAPHY:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_GET_CHANNEL_GEOGRAPHY \n"));
-			wrq->u.data.length = 1;
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.Geography, 1);
-			DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
-			break;
-
-
-#ifdef QOS_DLS_SUPPORT
-		case RT_OID_802_11_QUERY_DLS:
-			wrq->u.data.length = sizeof(BOOLEAN);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.bDLSCapable, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_DLS(=%d)\n", pAdapter->CommonCfg.bDLSCapable));
-			break;
-
-		case RT_OID_802_11_QUERY_DLS_PARAM:
-			{
-				PRT_802_11_DLS_INFO	pDlsInfo = kmalloc(sizeof(RT_802_11_DLS_INFO), GFP_ATOMIC);
-				if (pDlsInfo == NULL)
-					break;
-
-				for (i=0; i<MAX_NUM_OF_DLS_ENTRY; i++)
-				{
-					RTMPMoveMemory(&pDlsInfo->Entry[i], &pAdapter->StaCfg.DLSEntry[i], sizeof(RT_802_11_DLS_UI));
-				}
-
-				pDlsInfo->num = MAX_NUM_OF_DLS_ENTRY;
-				wrq->u.data.length = sizeof(RT_802_11_DLS_INFO);
-				Status = copy_to_user(wrq->u.data.pointer, pDlsInfo, wrq->u.data.length);
-				DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_DLS_PARAM\n"));
-
-				if (pDlsInfo)
-					kfree(pDlsInfo);
-			}
-			break;
-#endif // QOS_DLS_SUPPORT //
-        default:
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::unknown IOCTL's subcmd = 0x%08x\n", cmd));
-            Status = -EOPNOTSUPP;
-            break;
-    }
-    return Status;
-}
-
-INT rt28xx_sta_ioctl(
-	IN	struct net_device	*net_dev,
-	IN	OUT	struct ifreq	*rq,
-	IN	INT					cmd)
-{
-	POS_COOKIE			pObj;
-	VIRTUAL_ADAPTER		*pVirtualAd = NULL;
-	RTMP_ADAPTER        *pAd = NULL;
-	struct iwreq        *wrq = (struct iwreq *) rq;
-	BOOLEAN				StateMachineTouched = FALSE;
-	INT					Status = NDIS_STATUS_SUCCESS;
-	USHORT				subcmd;
-
-	if (net_dev->priv_flags == INT_MAIN)
-	{
-		pAd = net_dev->ml_priv;
-	}
-	else
-	{
-		pVirtualAd = net_dev->ml_priv;
-		pAd = pVirtualAd->RtmpDev->ml_priv;
-	}
-	pObj = (POS_COOKIE) pAd->OS_Cookie;
-
-	if (pAd == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->ml_priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-    //check if the interface is down
-    if(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-#ifdef CONFIG_APSTA_MIXED_SUPPORT
-	    if (wrq->u.data.pointer == NULL)
-	    {
-		    return Status;
-	    }
-
-	    if (strstr(wrq->u.data.pointer, "OpMode") == NULL)
-#endif // CONFIG_APSTA_MIXED_SUPPORT //
-        {
-            DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-		    return -ENETDOWN;
-        }
-    }
-
-	{	// determine this ioctl command is comming from which interface.
-		pObj->ioctl_if_type = INT_MAIN;
-		pObj->ioctl_if = MAIN_MBSSID;
-	}
-
-	switch(cmd)
-	{
-#ifdef RALINK_ATE
-#ifdef RALINK_28xx_QA
-		case RTPRIV_IOCTL_ATE:
-			{
-				RtmpDoAte(pAd, wrq);
-			}
-			break;
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-        case SIOCGIFHWADDR:
-			DBGPRINT(RT_DEBUG_TRACE, ("IOCTL::SIOCGIFHWADDR\n"));
-			memcpy(wrq->u.name, pAd->CurrentAddress, ETH_ALEN);
-			break;
-		case SIOCGIWNAME:
-        {
-        	char *name=&wrq->u.name[0];
-        	rt_ioctl_giwname(net_dev, NULL, name, NULL);
-			break;
-		}
-		case SIOCGIWESSID:  //Get ESSID
-        {
-        	struct iw_point *essid=&wrq->u.essid;
-        	rt_ioctl_giwessid(net_dev, NULL, essid, essid->pointer);
-			break;
-		}
-		case SIOCSIWESSID:  //Set ESSID
-        {
-        	struct iw_point	*essid=&wrq->u.essid;
-        	rt_ioctl_siwessid(net_dev, NULL, essid, essid->pointer);
-			break;
-		}
-		case SIOCSIWNWID:   // set network id (the cell)
-		case SIOCGIWNWID:   // get network id
-			Status = -EOPNOTSUPP;
-			break;
-		case SIOCSIWFREQ:   //set channel/frequency (Hz)
-        {
-        	struct iw_freq *freq=&wrq->u.freq;
-        	rt_ioctl_siwfreq(net_dev, NULL, freq, NULL);
-			break;
-		}
-		case SIOCGIWFREQ:   // get channel/frequency (Hz)
-        {
-        	struct iw_freq *freq=&wrq->u.freq;
-        	rt_ioctl_giwfreq(net_dev, NULL, freq, NULL);
-			break;
-		}
-		case SIOCSIWNICKN: //set node name/nickname
-        {
-        	struct iw_point *data=&wrq->u.data;
-        	rt_ioctl_siwnickn(net_dev, NULL, data, NULL);
-			break;
-		}
-		case SIOCGIWNICKN: //get node name/nickname
-        {
-        	struct iw_point *data=&wrq->u.data;
-        	rt_ioctl_giwnickn(net_dev, NULL, data, NULL);
-			break;
-		}
-		case SIOCGIWRATE:   //get default bit rate (bps)
-		    rt_ioctl_giwrate(net_dev, NULL, &wrq->u, NULL);
-            break;
-	    case SIOCSIWRATE:  //set default bit rate (bps)
-	        rt_ioctl_siwrate(net_dev, NULL, &wrq->u, NULL);
-            break;
-        case SIOCGIWRTS:  // get RTS/CTS threshold (bytes)
-        {
-        	struct iw_param *rts=&wrq->u.rts;
-        	rt_ioctl_giwrts(net_dev, NULL, rts, NULL);
-			break;
-		}
-        case SIOCSIWRTS:  //set RTS/CTS threshold (bytes)
-        {
-        	struct iw_param *rts=&wrq->u.rts;
-        	rt_ioctl_siwrts(net_dev, NULL, rts, NULL);
-			break;
-		}
-        case SIOCGIWFRAG:  //get fragmentation thr (bytes)
-        {
-        	struct iw_param *frag=&wrq->u.frag;
-        	rt_ioctl_giwfrag(net_dev, NULL, frag, NULL);
-			break;
-		}
-        case SIOCSIWFRAG:  //set fragmentation thr (bytes)
-        {
-        	struct iw_param *frag=&wrq->u.frag;
-        	rt_ioctl_siwfrag(net_dev, NULL, frag, NULL);
-			break;
-		}
-        case SIOCGIWENCODE:  //get encoding token & mode
-        {
-        	struct iw_point *erq=&wrq->u.encoding;
-        	if(erq->pointer)
-        		rt_ioctl_giwencode(net_dev, NULL, erq, erq->pointer);
-			break;
-		}
-        case SIOCSIWENCODE:  //set encoding token & mode
-        {
-        	struct iw_point *erq=&wrq->u.encoding;
-        	if(erq->pointer)
-        		rt_ioctl_siwencode(net_dev, NULL, erq, erq->pointer);
-			break;
-		}
-		case SIOCGIWAP:     //get access point MAC addresses
-        {
-        	struct sockaddr *ap_addr=&wrq->u.ap_addr;
-        	rt_ioctl_giwap(net_dev, NULL, ap_addr, ap_addr->sa_data);
-			break;
-		}
-	    case SIOCSIWAP:  //set access point MAC addresses
-        {
-        	struct sockaddr *ap_addr=&wrq->u.ap_addr;
-        	rt_ioctl_siwap(net_dev, NULL, ap_addr, ap_addr->sa_data);
-			break;
-		}
-		case SIOCGIWMODE:   //get operation mode
-        {
-        	__u32 *mode=&wrq->u.mode;
-        	rt_ioctl_giwmode(net_dev, NULL, mode, NULL);
-			break;
-		}
-		case SIOCSIWMODE:   //set operation mode
-        {
-        	__u32 *mode=&wrq->u.mode;
-        	rt_ioctl_siwmode(net_dev, NULL, mode, NULL);
-			break;
-		}
-		case SIOCGIWSENS:   //get sensitivity (dBm)
-		case SIOCSIWSENS:	//set sensitivity (dBm)
-		case SIOCGIWPOWER:  //get Power Management settings
-		case SIOCSIWPOWER:  //set Power Management settings
-		case SIOCGIWTXPOW:  //get transmit power (dBm)
-		case SIOCSIWTXPOW:  //set transmit power (dBm)
-		case SIOCGIWRANGE:	//Get range of parameters
-		case SIOCGIWRETRY:	//get retry limits and lifetime
-		case SIOCSIWRETRY:	//set retry limits and lifetime
-			Status = -EOPNOTSUPP;
-			break;
-		case RT_PRIV_IOCTL:
-			subcmd = wrq->u.data.flags;
-			if( subcmd & OID_GET_SET_TOGGLE)
-				Status = RTMPSetInformation(pAd, rq, subcmd);
-			else
-				Status = RTMPQueryInformation(pAd, rq, subcmd);
-			break;
-		case SIOCGIWPRIV:
-			if (wrq->u.data.pointer)
-			{
-				if ( access_ok(VERIFY_WRITE, wrq->u.data.pointer, sizeof(privtab)) != TRUE)
-					break;
-				wrq->u.data.length = sizeof(privtab) / sizeof(privtab[0]);
-				if (copy_to_user(wrq->u.data.pointer, privtab, sizeof(privtab)))
-					Status = -EFAULT;
-			}
-			break;
-		case RTPRIV_IOCTL_SET:
-			if(access_ok(VERIFY_READ, wrq->u.data.pointer, wrq->u.data.length) != TRUE)
-				break;
-			rt_ioctl_setparam(net_dev, NULL, NULL, wrq->u.data.pointer);
-			break;
-		case RTPRIV_IOCTL_GSITESURVEY:
-			RTMPIoctlGetSiteSurvey(pAd, wrq);
-		    break;
-#ifdef DBG
-		case RTPRIV_IOCTL_MAC:
-			RTMPIoctlMAC(pAd, wrq);
-			break;
-		case RTPRIV_IOCTL_E2P:
-			RTMPIoctlE2PROM(pAd, wrq);
-			break;
-#endif // DBG //
-        case SIOCETHTOOL:
-                break;
-		default:
-			DBGPRINT(RT_DEBUG_ERROR, ("IOCTL::unknown IOCTL's cmd = 0x%08x\n", cmd));
-			Status = -EOPNOTSUPP;
-			break;
-	}
-
-    if(StateMachineTouched) // Upper layer sent a MLME-related operations
-    	RT28XX_MLME_HANDLER(pAd);
-
-	return Status;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set SSID
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_SSID_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    NDIS_802_11_SSID                    Ssid, *pSsid=NULL;
-    BOOLEAN                             StateMachineTouched = FALSE;
-    int                                 success = TRUE;
-
-    if( strlen(arg) <= MAX_LEN_OF_SSID)
-    {
-        NdisZeroMemory(&Ssid, sizeof(NDIS_802_11_SSID));
-        if (strlen(arg) != 0)
-        {
-            NdisMoveMemory(Ssid.Ssid, arg, strlen(arg));
-            Ssid.SsidLength = strlen(arg);
-        }
-        else   //ANY ssid
-        {
-            Ssid.SsidLength = 0;
-		    memcpy(Ssid.Ssid, "", 0);
-			pAdapter->StaCfg.BssType = BSS_INFRA;
-			pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
-	        pAdapter->StaCfg.WepStatus  = Ndis802_11EncryptionDisabled;
-		}
-        pSsid = &Ssid;
-
-        if (pAdapter->Mlme.CntlMachine.CurrState != CNTL_IDLE)
-        {
-            RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-            DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
-        }
-
-        pAdapter->MlmeAux.CurrReqIsFromNdis = TRUE;
-        pAdapter->StaCfg.bScanReqIsFromWebUI = FALSE;
-		pAdapter->bConfigChanged = TRUE;
-
-        MlmeEnqueue(pAdapter,
-                    MLME_CNTL_STATE_MACHINE,
-                    OID_802_11_SSID,
-                    sizeof(NDIS_802_11_SSID),
-                    (VOID *)pSsid);
-
-        StateMachineTouched = TRUE;
-        DBGPRINT(RT_DEBUG_TRACE, ("Set_SSID_Proc::(Len=%d,Ssid=%s)\n", Ssid.SsidLength, Ssid.Ssid));
-    }
-    else
-        success = FALSE;
-
-    if (StateMachineTouched) // Upper layer sent a MLME-related operations
-    	RT28XX_MLME_HANDLER(pAdapter);
-
-    return success;
-}
-
-#ifdef WMM_SUPPORT
-/*
-    ==========================================================================
-    Description:
-        Set WmmCapable Enable or Disable
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_WmmCapable_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	BOOLEAN	bWmmCapable;
-
-	bWmmCapable = simple_strtol(arg, 0, 10);
-
-	if ((bWmmCapable == 1)
-#ifdef RT2870
-		&& (pAd->NumberOfPipes >= 5)
-#endif // RT2870 //
-		)
-		pAd->CommonCfg.bWmmCapable = TRUE;
-	else if (bWmmCapable == 0)
-		pAd->CommonCfg.bWmmCapable = FALSE;
-	else
-		return FALSE;  //Invalid argument
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_WmmCapable_Proc::(bWmmCapable=%d)\n",
-		pAd->CommonCfg.bWmmCapable));
-
-	return TRUE;
-}
-#endif // WMM_SUPPORT //
-
-/*
-    ==========================================================================
-    Description:
-        Set Network Type(Infrastructure/Adhoc mode)
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_NetworkType_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    UINT32	Value = 0;
-
-    if (strcmp(arg, "Adhoc") == 0)
-	{
-		if (pAdapter->StaCfg.BssType != BSS_ADHOC)
-		{
-			// Config has changed
-			pAdapter->bConfigChanged = TRUE;
-            if (MONITOR_ON(pAdapter))
-            {
-                RTMP_IO_WRITE32(pAdapter, RX_FILTR_CFG, STANORMAL);
-                RTMP_IO_READ32(pAdapter, MAC_SYS_CTRL, &Value);
-				Value &= (~0x80);
-				RTMP_IO_WRITE32(pAdapter, MAC_SYS_CTRL, Value);
-                OPSTATUS_CLEAR_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED);
-                pAdapter->StaCfg.bAutoReconnect = TRUE;
-                LinkDown(pAdapter, FALSE);
-            }
-			if (INFRA_ON(pAdapter))
-			{
-				//BOOLEAN Cancelled;
-				// Set the AutoReconnectSsid to prevent it reconnect to old SSID
-				// Since calling this indicate user don't want to connect to that SSID anymore.
-				pAdapter->MlmeAux.AutoReconnectSsidLen= 32;
-				NdisZeroMemory(pAdapter->MlmeAux.AutoReconnectSsid, pAdapter->MlmeAux.AutoReconnectSsidLen);
-
-				LinkDown(pAdapter, FALSE);
-
-				DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event BB!\n"));
-			}
-		}
-		pAdapter->StaCfg.BssType = BSS_ADHOC;
-        pAdapter->net_dev->type = pAdapter->StaCfg.OriDevType;
-		DBGPRINT(RT_DEBUG_TRACE, ("===>Set_NetworkType_Proc::(AD-HOC)\n"));
-	}
-    else if (strcmp(arg, "Infra") == 0)
-	{
-		if (pAdapter->StaCfg.BssType != BSS_INFRA)
-		{
-			// Config has changed
-			pAdapter->bConfigChanged = TRUE;
-            if (MONITOR_ON(pAdapter))
-            {
-                RTMP_IO_WRITE32(pAdapter, RX_FILTR_CFG, STANORMAL);
-                RTMP_IO_READ32(pAdapter, MAC_SYS_CTRL, &Value);
-				Value &= (~0x80);
-				RTMP_IO_WRITE32(pAdapter, MAC_SYS_CTRL, Value);
-                OPSTATUS_CLEAR_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED);
-                pAdapter->StaCfg.bAutoReconnect = TRUE;
-                LinkDown(pAdapter, FALSE);
-            }
-			if (ADHOC_ON(pAdapter))
-			{
-				// Set the AutoReconnectSsid to prevent it reconnect to old SSID
-				// Since calling this indicate user don't want to connect to that SSID anymore.
-				pAdapter->MlmeAux.AutoReconnectSsidLen= 32;
-				NdisZeroMemory(pAdapter->MlmeAux.AutoReconnectSsid, pAdapter->MlmeAux.AutoReconnectSsidLen);
-
-				LinkDown(pAdapter, FALSE);
-			}
-		}
-		pAdapter->StaCfg.BssType = BSS_INFRA;
-        pAdapter->net_dev->type = pAdapter->StaCfg.OriDevType;
-		DBGPRINT(RT_DEBUG_TRACE, ("===>Set_NetworkType_Proc::(INFRA)\n"));
-
-        pAdapter->StaCfg.BssType = BSS_INFRA;
-	}
-    else if (strcmp(arg, "Monitor") == 0)
-    {
-		UCHAR	bbpValue = 0;
-		BCN_TIME_CFG_STRUC csr;
-		OPSTATUS_CLEAR_FLAG(pAdapter, fOP_STATUS_INFRA_ON);
-        OPSTATUS_CLEAR_FLAG(pAdapter, fOP_STATUS_ADHOC_ON);
-		OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED);
-		// disable all periodic state machine
-		pAdapter->StaCfg.bAutoReconnect = FALSE;
-		// reset all mlme state machine
-		RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-		DBGPRINT(RT_DEBUG_TRACE, ("fOP_STATUS_MEDIA_STATE_CONNECTED \n"));
-        if (pAdapter->CommonCfg.CentralChannel == 0)
-        {
-#ifdef DOT11_N_SUPPORT
-            if (pAdapter->CommonCfg.PhyMode == PHY_11AN_MIXED)
-                pAdapter->CommonCfg.CentralChannel = 36;
-            else
-#endif // DOT11_N_SUPPORT //
-                pAdapter->CommonCfg.CentralChannel = 6;
-        }
-#ifdef DOT11_N_SUPPORT
-        else
-            N_ChannelCheck(pAdapter);
-#endif // DOT11_N_SUPPORT //
-
-#ifdef DOT11_N_SUPPORT
-	if (pAdapter->CommonCfg.PhyMode >= PHY_11ABGN_MIXED &&
-            pAdapter->CommonCfg.RegTransmitSetting.field.BW == BW_40 &&
-            pAdapter->CommonCfg.RegTransmitSetting.field.EXTCHA == EXTCHA_ABOVE)
-		{
-			// 40MHz ,control channel at lower
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R4, &bbpValue);
-			bbpValue &= (~0x18);
-			bbpValue |= 0x10;
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R4, bbpValue);
-			pAdapter->CommonCfg.BBPCurrentBW = BW_40;
-			//  RX : control channel at lower
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R3, &bbpValue);
-			bbpValue &= (~0x20);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R3, bbpValue);
-
-			RTMP_IO_READ32(pAdapter, TX_BAND_CFG, &Value);
-			Value &= 0xfffffffe;
-			RTMP_IO_WRITE32(pAdapter, TX_BAND_CFG, Value);
-			pAdapter->CommonCfg.CentralChannel = pAdapter->CommonCfg.Channel + 2;
-            AsicSwitchChannel(pAdapter, pAdapter->CommonCfg.CentralChannel, FALSE);
-		    AsicLockChannel(pAdapter, pAdapter->CommonCfg.CentralChannel);
-            DBGPRINT(RT_DEBUG_TRACE, ("BW_40 ,control_channel(%d), CentralChannel(%d) \n",
-                                       pAdapter->CommonCfg.Channel,
-                                       pAdapter->CommonCfg.CentralChannel));
-		}
-		else if (pAdapter->CommonCfg.PhyMode >= PHY_11ABGN_MIXED &&
-                 pAdapter->CommonCfg.RegTransmitSetting.field.BW == BW_40 &&
-                 pAdapter->CommonCfg.RegTransmitSetting.field.EXTCHA == EXTCHA_BELOW)
-		{
-			// 40MHz ,control channel at upper
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R4, &bbpValue);
-			bbpValue &= (~0x18);
-			bbpValue |= 0x10;
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R4, bbpValue);
-			pAdapter->CommonCfg.BBPCurrentBW = BW_40;
-			RTMP_IO_READ32(pAdapter, TX_BAND_CFG, &Value);
-			Value |= 0x1;
-			RTMP_IO_WRITE32(pAdapter, TX_BAND_CFG, Value);
-
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R3, &bbpValue);
-			bbpValue |= (0x20);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R3, bbpValue);
-			pAdapter->CommonCfg.CentralChannel = pAdapter->CommonCfg.Channel - 2;
-            AsicSwitchChannel(pAdapter, pAdapter->CommonCfg.CentralChannel, FALSE);
-		    AsicLockChannel(pAdapter, pAdapter->CommonCfg.CentralChannel);
-            DBGPRINT(RT_DEBUG_TRACE, ("BW_40 ,control_channel(%d), CentralChannel(%d) \n",
-                                       pAdapter->CommonCfg.Channel,
-                                       pAdapter->CommonCfg.CentralChannel));
-		}
-		else
-#endif // DOT11_N_SUPPORT //
-		{
-			// 20MHz
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R4, &bbpValue);
-			bbpValue &= (~0x18);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R4, bbpValue);
-			pAdapter->CommonCfg.BBPCurrentBW = BW_20;
-			AsicSwitchChannel(pAdapter, pAdapter->CommonCfg.Channel, FALSE);
-			AsicLockChannel(pAdapter, pAdapter->CommonCfg.Channel);
-			DBGPRINT(RT_DEBUG_TRACE, ("BW_20, Channel(%d)\n", pAdapter->CommonCfg.Channel));
-		}
-		// Enable Rx with promiscuous reception
-		RTMP_IO_WRITE32(pAdapter, RX_FILTR_CFG, 0x3);
-		// ASIC supporsts sniffer function with replacing RSSI with timestamp.
-		//RTMP_IO_READ32(pAdapter, MAC_SYS_CTRL, &Value);
-		//Value |= (0x80);
-		//RTMP_IO_WRITE32(pAdapter, MAC_SYS_CTRL, Value);
-		// disable sync
-		RTMP_IO_READ32(pAdapter, BCN_TIME_CFG, &csr.word);
-		csr.field.bBeaconGen = 0;
-		csr.field.bTBTTEnable = 0;
-		csr.field.TsfSyncMode = 0;
-		RTMP_IO_WRITE32(pAdapter, BCN_TIME_CFG, csr.word);
-
-		pAdapter->StaCfg.BssType = BSS_MONITOR;
-        pAdapter->net_dev->type = ARPHRD_IEEE80211_PRISM; //ARPHRD_IEEE80211; // IEEE80211
-		DBGPRINT(RT_DEBUG_TRACE, ("===>Set_NetworkType_Proc::(MONITOR)\n"));
-    }
-
-    // Reset Ralink supplicant to not use, it will be set to start when UI set PMK key
-    pAdapter->StaCfg.WpaState = SS_NOTUSE;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_NetworkType_Proc::(NetworkType=%d)\n", pAdapter->StaCfg.BssType));
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Authentication mode
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_AuthMode_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    if ((strcmp(arg, "WEPAUTO") == 0) || (strcmp(arg, "wepauto") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeAutoSwitch;
-    else if ((strcmp(arg, "OPEN") == 0) || (strcmp(arg, "open") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
-    else if ((strcmp(arg, "SHARED") == 0) || (strcmp(arg, "shared") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeShared;
-    else if ((strcmp(arg, "WPAPSK") == 0) || (strcmp(arg, "wpapsk") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPAPSK;
-    else if ((strcmp(arg, "WPANONE") == 0) || (strcmp(arg, "wpanone") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPANone;
-    else if ((strcmp(arg, "WPA2PSK") == 0) || (strcmp(arg, "wpa2psk") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2PSK;
-#ifdef WPA_SUPPLICANT_SUPPORT
-    else if ((strcmp(arg, "WPA") == 0) || (strcmp(arg, "wpa") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA;
-    else if ((strcmp(arg, "WPA2") == 0) || (strcmp(arg, "wpa2") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2;
-#endif // WPA_SUPPLICANT_SUPPORT //
-    else
-        return FALSE;
-
-    pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_AuthMode_Proc::(AuthMode=%d)\n", pAdapter->StaCfg.AuthMode));
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Encryption Type
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_EncrypType_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    if ((strcmp(arg, "NONE") == 0) || (strcmp(arg, "none") == 0))
-    {
-        if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-            return TRUE;    // do nothing
-
-        pAdapter->StaCfg.WepStatus     = Ndis802_11WEPDisabled;
-        pAdapter->StaCfg.PairCipher    = Ndis802_11WEPDisabled;
-	    pAdapter->StaCfg.GroupCipher   = Ndis802_11WEPDisabled;
-    }
-    else if ((strcmp(arg, "WEP") == 0) || (strcmp(arg, "wep") == 0))
-    {
-        if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-            return TRUE;    // do nothing
-
-        pAdapter->StaCfg.WepStatus     = Ndis802_11WEPEnabled;
-        pAdapter->StaCfg.PairCipher    = Ndis802_11WEPEnabled;
-	    pAdapter->StaCfg.GroupCipher   = Ndis802_11WEPEnabled;
-    }
-    else if ((strcmp(arg, "TKIP") == 0) || (strcmp(arg, "tkip") == 0))
-    {
-        if (pAdapter->StaCfg.AuthMode < Ndis802_11AuthModeWPA)
-            return TRUE;    // do nothing
-
-        pAdapter->StaCfg.WepStatus     = Ndis802_11Encryption2Enabled;
-        pAdapter->StaCfg.PairCipher    = Ndis802_11Encryption2Enabled;
-	    pAdapter->StaCfg.GroupCipher   = Ndis802_11Encryption2Enabled;
-    }
-    else if ((strcmp(arg, "AES") == 0) || (strcmp(arg, "aes") == 0))
-    {
-        if (pAdapter->StaCfg.AuthMode < Ndis802_11AuthModeWPA)
-            return TRUE;    // do nothing
-
-        pAdapter->StaCfg.WepStatus     = Ndis802_11Encryption3Enabled;
-        pAdapter->StaCfg.PairCipher    = Ndis802_11Encryption3Enabled;
-	    pAdapter->StaCfg.GroupCipher   = Ndis802_11Encryption3Enabled;
-    }
-    else
-        return FALSE;
-
-    pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_EncrypType_Proc::(EncrypType=%d)\n", pAdapter->StaCfg.WepStatus));
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Default Key ID
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_DefaultKeyID_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    ULONG                               KeyIdx;
-
-    KeyIdx = simple_strtol(arg, 0, 10);
-    if((KeyIdx >= 1 ) && (KeyIdx <= 4))
-        pAdapter->StaCfg.DefaultKeyId = (UCHAR) (KeyIdx - 1 );
-    else
-        return FALSE;  //Invalid argument
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_DefaultKeyID_Proc::(DefaultKeyID=%d)\n", pAdapter->StaCfg.DefaultKeyId));
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set WEP KEY1
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_Key1_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    int                                 KeyLen;
-    int                                 i;
-    UCHAR                               CipherAlg=CIPHER_WEP64;
-
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        return TRUE;    // do nothing
-
-    KeyLen = strlen(arg);
-
-    switch (KeyLen)
-    {
-        case 5: //wep 40 Ascii type
-            pAdapter->SharedKey[BSS0][0].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][0].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::(Key1=%s and type=%s)\n", arg, "Ascii"));
-            break;
-        case 10: //wep 40 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][0].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][0].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::(Key1=%s and type=%s)\n", arg, "Hex"));
-            break;
-        case 13: //wep 104 Ascii type
-            pAdapter->SharedKey[BSS0][0].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][0].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::(Key1=%s and type=%s)\n", arg, "Ascii"));
-            break;
-        case 26: //wep 104 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][0].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][0].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::(Key1=%s and type=%s)\n", arg, "Hex"));
-            break;
-        default: //Invalid argument
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::Invalid argument (=%s)\n", arg));
-            return FALSE;
-    }
-
-    pAdapter->SharedKey[BSS0][0].CipherAlg = CipherAlg;
-
-    // Set keys (into ASIC)
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        ;   // not support
-    else    // Old WEP stuff
-    {
-        AsicAddSharedKeyEntry(pAdapter,
-                              0,
-                              0,
-                              pAdapter->SharedKey[BSS0][0].CipherAlg,
-                              pAdapter->SharedKey[BSS0][0].Key,
-                              NULL,
-                              NULL);
-    }
-
-    return TRUE;
-}
-/*
-    ==========================================================================
-
-    Description:
-        Set WEP KEY2
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_Key2_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    int                                 KeyLen;
-    int                                 i;
-    UCHAR                               CipherAlg=CIPHER_WEP64;
-
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        return TRUE;    // do nothing
-
-    KeyLen = strlen(arg);
-
-    switch (KeyLen)
-    {
-        case 5: //wep 40 Ascii type
-            pAdapter->SharedKey[BSS0][1].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][1].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::(Key2=%s and type=%s)\n", arg, "Ascii"));
-            break;
-        case 10: //wep 40 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][1].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][1].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::(Key2=%s and type=%s)\n", arg, "Hex"));
-            break;
-        case 13: //wep 104 Ascii type
-            pAdapter->SharedKey[BSS0][1].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][1].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::(Key2=%s and type=%s)\n", arg, "Ascii"));
-            break;
-        case 26: //wep 104 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][1].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][1].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::(Key2=%s and type=%s)\n", arg, "Hex"));
-            break;
-        default: //Invalid argument
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::Invalid argument (=%s)\n", arg));
-            return FALSE;
-    }
-    pAdapter->SharedKey[BSS0][1].CipherAlg = CipherAlg;
-
-    // Set keys (into ASIC)
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        ;   // not support
-    else    // Old WEP stuff
-    {
-        AsicAddSharedKeyEntry(pAdapter,
-                              0,
-                              1,
-                              pAdapter->SharedKey[BSS0][1].CipherAlg,
-                              pAdapter->SharedKey[BSS0][1].Key,
-                              NULL,
-                              NULL);
-    }
-
-    return TRUE;
-}
-/*
-    ==========================================================================
-    Description:
-        Set WEP KEY3
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_Key3_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    int                                 KeyLen;
-    int                                 i;
-    UCHAR                               CipherAlg=CIPHER_WEP64;
-
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        return TRUE;    // do nothing
-
-    KeyLen = strlen(arg);
-
-    switch (KeyLen)
-    {
-        case 5: //wep 40 Ascii type
-            pAdapter->SharedKey[BSS0][2].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][2].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::(Key3=%s and type=Ascii)\n", arg));
-            break;
-        case 10: //wep 40 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][2].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][2].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::(Key3=%s and type=Hex)\n", arg));
-            break;
-        case 13: //wep 104 Ascii type
-            pAdapter->SharedKey[BSS0][2].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][2].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::(Key3=%s and type=Ascii)\n", arg));
-            break;
-        case 26: //wep 104 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][2].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][2].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::(Key3=%s and type=Hex)\n", arg));
-            break;
-        default: //Invalid argument
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::Invalid argument (=%s)\n", arg));
-            return FALSE;
-    }
-    pAdapter->SharedKey[BSS0][2].CipherAlg = CipherAlg;
-
-    // Set keys (into ASIC)
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        ;   // not support
-    else    // Old WEP stuff
-    {
-        AsicAddSharedKeyEntry(pAdapter,
-                              0,
-                              2,
-                              pAdapter->SharedKey[BSS0][2].CipherAlg,
-                              pAdapter->SharedKey[BSS0][2].Key,
-                              NULL,
-                              NULL);
-    }
-
-    return TRUE;
-}
-/*
-    ==========================================================================
-    Description:
-        Set WEP KEY4
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_Key4_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    int                                 KeyLen;
-    int                                 i;
-    UCHAR                               CipherAlg=CIPHER_WEP64;
-
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        return TRUE;    // do nothing
-
-    KeyLen = strlen(arg);
-
-    switch (KeyLen)
-    {
-        case 5: //wep 40 Ascii type
-            pAdapter->SharedKey[BSS0][3].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][3].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::(Key4=%s and type=%s)\n", arg, "Ascii"));
-            break;
-        case 10: //wep 40 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][3].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][3].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::(Key4=%s and type=%s)\n", arg, "Hex"));
-            break;
-        case 13: //wep 104 Ascii type
-            pAdapter->SharedKey[BSS0][3].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][3].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::(Key4=%s and type=%s)\n", arg, "Ascii"));
-            break;
-        case 26: //wep 104 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][3].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][3].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::(Key4=%s and type=%s)\n", arg, "Hex"));
-            break;
-        default: //Invalid argument
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::Invalid argument (=%s)\n", arg));
-            return FALSE;
-    }
-    pAdapter->SharedKey[BSS0][3].CipherAlg = CipherAlg;
-
-    // Set keys (into ASIC)
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        ;   // not support
-    else    // Old WEP stuff
-    {
-        AsicAddSharedKeyEntry(pAdapter,
-                              0,
-                              3,
-                              pAdapter->SharedKey[BSS0][3].CipherAlg,
-                              pAdapter->SharedKey[BSS0][3].Key,
-                              NULL,
-                              NULL);
-    }
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set WPA PSK key
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_WPAPSK_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    UCHAR                   keyMaterial[40];
-
-    if ((pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPAPSK) &&
-        (pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPA2PSK) &&
-	    (pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPANone)
-		)
-        return TRUE;    // do nothing
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_WPAPSK_Proc::(WPAPSK=%s)\n", arg));
-
-    NdisZeroMemory(keyMaterial, 40);
-
-    if ((strlen(arg) < 8) || (strlen(arg) > 64))
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("Set failed!!(WPAPSK=%s), WPAPSK key-string required 8 ~ 64 characters \n", arg));
-        return FALSE;
-    }
-
-    if (strlen(arg) == 64)
-    {
-        AtoH(arg, keyMaterial, 32);
-        NdisMoveMemory(pAdapter->StaCfg.PMK, keyMaterial, 32);
-
-    }
-    else
-    {
-        PasswordHash((char *)arg, pAdapter->MlmeAux.Ssid, pAdapter->MlmeAux.SsidLen, keyMaterial);
-        NdisMoveMemory(pAdapter->StaCfg.PMK, keyMaterial, 32);
-    }
-
-
-
-    if(pAdapter->StaCfg.BssType == BSS_ADHOC &&
-       pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
-    {
-         pAdapter->StaCfg.WpaState = SS_NOTUSE;
-    }
-    else
-    {
-        // Start STA supplicant state machine
-        pAdapter->StaCfg.WpaState = SS_START;
-    }
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Power Saving mode
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_PSMode_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    if (pAdapter->StaCfg.BssType == BSS_INFRA)
-    {
-        if ((strcmp(arg, "Max_PSP") == 0) ||
-			(strcmp(arg, "max_psp") == 0) ||
-			(strcmp(arg, "MAX_PSP") == 0))
-        {
-            // do NOT turn on PSM bit here, wait until MlmeCheckForPsmChange()
-            // to exclude certain situations.
-            if (pAdapter->StaCfg.bWindowsACCAMEnable == FALSE)
-                pAdapter->StaCfg.WindowsPowerMode = Ndis802_11PowerModeMAX_PSP;
-            pAdapter->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeMAX_PSP;
-            OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_RECEIVE_DTIM);
-            pAdapter->StaCfg.DefaultListenCount = 5;
-
-        }
-        else if ((strcmp(arg, "Fast_PSP") == 0) ||
-				 (strcmp(arg, "fast_psp") == 0) ||
-                 (strcmp(arg, "FAST_PSP") == 0))
-        {
-            // do NOT turn on PSM bit here, wait until MlmeCheckForPsmChange()
-            // to exclude certain situations.
-            OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_RECEIVE_DTIM);
-            if (pAdapter->StaCfg.bWindowsACCAMEnable == FALSE)
-                pAdapter->StaCfg.WindowsPowerMode = Ndis802_11PowerModeFast_PSP;
-            pAdapter->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeFast_PSP;
-            pAdapter->StaCfg.DefaultListenCount = 3;
-        }
-        else if ((strcmp(arg, "Legacy_PSP") == 0) ||
-                 (strcmp(arg, "legacy_psp") == 0) ||
-                 (strcmp(arg, "LEGACY_PSP") == 0))
-        {
-            // do NOT turn on PSM bit here, wait until MlmeCheckForPsmChange()
-            // to exclude certain situations.
-            OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_RECEIVE_DTIM);
-            if (pAdapter->StaCfg.bWindowsACCAMEnable == FALSE)
-                pAdapter->StaCfg.WindowsPowerMode = Ndis802_11PowerModeLegacy_PSP;
-            pAdapter->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeLegacy_PSP;
-            pAdapter->StaCfg.DefaultListenCount = 3;
-        }
-        else
-        {
-            //Default Ndis802_11PowerModeCAM
-            // clear PSM bit immediately
-            MlmeSetPsmBit(pAdapter, PWR_ACTIVE);
-            OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_RECEIVE_DTIM);
-            if (pAdapter->StaCfg.bWindowsACCAMEnable == FALSE)
-                pAdapter->StaCfg.WindowsPowerMode = Ndis802_11PowerModeCAM;
-            pAdapter->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeCAM;
-        }
-
-        DBGPRINT(RT_DEBUG_TRACE, ("Set_PSMode_Proc::(PSMode=%ld)\n", pAdapter->StaCfg.WindowsPowerMode));
-    }
-    else
-        return FALSE;
-
-
-    return TRUE;
-}
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-/*
-    ==========================================================================
-    Description:
-        Set WpaSupport flag.
-    Value:
-        0: Driver ignore wpa_supplicant.
-        1: wpa_supplicant initiates scanning and AP selection.
-        2: driver takes care of scanning, AP selection, and IEEE 802.11 association parameters.
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_Wpa_Support(
-    IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-
-    if ( simple_strtol(arg, 0, 10) == 0)
-        pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_DISABLE;
-    else if ( simple_strtol(arg, 0, 10) == 1)
-        pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_ENABLE;
-    else if ( simple_strtol(arg, 0, 10) == 2)
-        pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_ENABLE_WITH_WEB_UI;
-    else
-        pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_DISABLE;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_Wpa_Support::(WpaSupplicantUP=%d)\n", pAd->StaCfg.WpaSupplicantUP));
-
-    return TRUE;
-}
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef DBG
-/*
-    ==========================================================================
-    Description:
-        Read / Write MAC
-    Arguments:
-        pAdapter                    Pointer to our adapter
-        wrq                         Pointer to the ioctl argument
-
-    Return Value:
-        None
-
-    Note:
-        Usage:
-               1.) iwpriv ra0 mac 0        ==> read MAC where Addr=0x0
-               2.) iwpriv ra0 mac 0=12     ==> write MAC where Addr=0x0, value=12
-    ==========================================================================
-*/
-VOID RTMPIoctlMAC(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq)
-{
-	CHAR				*this_char;
-	CHAR				*value;
-	INT					j = 0, k = 0;
-	CHAR				msg[1024];
-	CHAR				arg[255];
-	ULONG				macAddr = 0;
-	UCHAR				temp[16], temp2[16];
-	UINT32				macValue = 0;
-	INT					Status;
-
-
-	memset(msg, 0x00, 1024);
-	if (wrq->u.data.length > 1) //No parameters.
-	{
-	    Status = copy_from_user(arg, wrq->u.data.pointer, (wrq->u.data.length > 255) ? 255 : wrq->u.data.length);
-		sprintf(msg, "\n");
-
-		//Parsing Read or Write
-	    this_char = arg;
-		if (!*this_char)
-			goto next;
-
-		if ((value = rtstrchr(this_char, '=')) != NULL)
-			*value++ = 0;
-
-		if (!value || !*value)
-		{ //Read
-			// Sanity check
-			if(strlen(this_char) > 4)
-				goto next;
-
-			j = strlen(this_char);
-			while(j-- > 0)
-			{
-				if(this_char[j] > 'f' || this_char[j] < '0')
-					return;
-			}
-
-			// Mac Addr
-			k = j = strlen(this_char);
-			while(j-- > 0)
-			{
-				this_char[4-k+j] = this_char[j];
-			}
-
-			while(k < 4)
-				this_char[3-k++]='0';
-			this_char[4]='\0';
-
-			if(strlen(this_char) == 4)
-			{
-				AtoH(this_char, temp, 2);
-				macAddr = *temp*256 + temp[1];
-				if (macAddr < 0xFFFF)
-				{
-					RTMP_IO_READ32(pAdapter, macAddr, &macValue);
-					DBGPRINT(RT_DEBUG_TRACE, ("MacAddr=%lx, MacValue=%x\n", macAddr, macValue));
-					sprintf(msg+strlen(msg), "[0x%08lX]:%08X  ", macAddr , macValue);
-				}
-				else
-				{//Invalid parametes, so default printk all bbp
-					goto next;
-				}
-			}
-		}
-		else
-		{ //Write
-			memcpy(&temp2, value, strlen(value));
-			temp2[strlen(value)] = '\0';
-
-			// Sanity check
-			if((strlen(this_char) > 4) || strlen(temp2) > 8)
-				goto next;
-
-			j = strlen(this_char);
-			while(j-- > 0)
-			{
-				if(this_char[j] > 'f' || this_char[j] < '0')
-					return;
-			}
-
-			j = strlen(temp2);
-			while(j-- > 0)
-			{
-				if(temp2[j] > 'f' || temp2[j] < '0')
-					return;
-			}
-
-			//MAC Addr
-			k = j = strlen(this_char);
-			while(j-- > 0)
-			{
-				this_char[4-k+j] = this_char[j];
-			}
-
-			while(k < 4)
-				this_char[3-k++]='0';
-			this_char[4]='\0';
-
-			//MAC value
-			k = j = strlen(temp2);
-			while(j-- > 0)
-			{
-				temp2[8-k+j] = temp2[j];
-			}
-
-			while(k < 8)
-				temp2[7-k++]='0';
-			temp2[8]='\0';
-
-			{
-				AtoH(this_char, temp, 2);
-				macAddr = *temp*256 + temp[1];
-
-				AtoH(temp2, temp, 4);
-				macValue = *temp*256*256*256 + temp[1]*256*256 + temp[2]*256 + temp[3];
-
-				// debug mode
-				if (macAddr == (HW_DEBUG_SETTING_BASE + 4))
-				{
-					// 0x2bf4: byte0 non-zero: enable R17 tuning, 0: disable R17 tuning
-                    if (macValue & 0x000000ff)
-                    {
-                        pAdapter->BbpTuning.bEnable = TRUE;
-                        DBGPRINT(RT_DEBUG_TRACE,("turn on R17 tuning\n"));
-                    }
-                    else
-                    {
-                        UCHAR R66;
-                        pAdapter->BbpTuning.bEnable = FALSE;
-                        R66 = 0x26 + GET_LNA_GAIN(pAdapter);
-#ifdef RALINK_ATE
-						if (ATE_ON(pAdapter))
-						{
-							ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R66, (0x26 + GET_LNA_GAIN(pAdapter)));
-						}
-						else
-#endif // RALINK_ATE //
-						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R66, (0x26 + GET_LNA_GAIN(pAdapter)));
-                        DBGPRINT(RT_DEBUG_TRACE,("turn off R17 tuning, restore to 0x%02x\n", R66));
-                    }
-					return;
-				}
-
-				DBGPRINT(RT_DEBUG_TRACE, ("MacAddr=%02lx, MacValue=0x%x\n", macAddr, macValue));
-
-				RTMP_IO_WRITE32(pAdapter, macAddr, macValue);
-				sprintf(msg+strlen(msg), "[0x%08lX]:%08X  ", macAddr, macValue);
-			}
-		}
-	}
-next:
-	if(strlen(msg) == 1)
-		sprintf(msg+strlen(msg), "===>Error command format!");
-
-	// Copy the information into the user buffer
-	wrq->u.data.length = strlen(msg);
-	Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlMAC\n\n"));
-}
-
-/*
-    ==========================================================================
-    Description:
-        Read / Write E2PROM
-    Arguments:
-        pAdapter                    Pointer to our adapter
-        wrq                         Pointer to the ioctl argument
-
-    Return Value:
-        None
-
-    Note:
-        Usage:
-               1.) iwpriv ra0 e2p 0     	==> read E2PROM where Addr=0x0
-               2.) iwpriv ra0 e2p 0=1234    ==> write E2PROM where Addr=0x0, value=1234
-    ==========================================================================
-*/
-VOID RTMPIoctlE2PROM(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq)
-{
-	CHAR				*this_char;
-	CHAR				*value;
-	INT					j = 0, k = 0;
-	CHAR				msg[1024];
-	CHAR				arg[255];
-	USHORT				eepAddr = 0;
-	UCHAR				temp[16], temp2[16];
-	USHORT				eepValue;
-	int					Status;
-
-
-	memset(msg, 0x00, 1024);
-	if (wrq->u.data.length > 1) //No parameters.
-	{
-	    Status = copy_from_user(arg, wrq->u.data.pointer, (wrq->u.data.length > 255) ? 255 : wrq->u.data.length);
-		sprintf(msg, "\n");
-
-	    //Parsing Read or Write
-		this_char = arg;
-
-
-		if (!*this_char)
-			goto next;
-
-		if ((value = rtstrchr(this_char, '=')) != NULL)
-			*value++ = 0;
-
-		if (!value || !*value)
-		{ //Read
-
-			// Sanity check
-			if(strlen(this_char) > 4)
-				goto next;
-
-			j = strlen(this_char);
-			while(j-- > 0)
-			{
-				if(this_char[j] > 'f' || this_char[j] < '0')
-					return;
-			}
-
-			// E2PROM addr
-			k = j = strlen(this_char);
-			while(j-- > 0)
-			{
-				this_char[4-k+j] = this_char[j];
-			}
-
-			while(k < 4)
-				this_char[3-k++]='0';
-			this_char[4]='\0';
-
-			if(strlen(this_char) == 4)
-			{
-				AtoH(this_char, temp, 2);
-				eepAddr = *temp*256 + temp[1];
-				if (eepAddr < 0xFFFF)
-				{
-					RT28xx_EEPROM_READ16(pAdapter, eepAddr, eepValue);
-					sprintf(msg+strlen(msg), "[0x%04X]:0x%04X  ", eepAddr , eepValue);
-				}
-				else
-				{//Invalid parametes, so default printk all bbp
-					goto next;
-				}
-			}
-		}
-		else
-		{ //Write
-			memcpy(&temp2, value, strlen(value));
-			temp2[strlen(value)] = '\0';
-
-			// Sanity check
-			if((strlen(this_char) > 4) || strlen(temp2) > 8)
-				goto next;
-
-			j = strlen(this_char);
-			while(j-- > 0)
-			{
-				if(this_char[j] > 'f' || this_char[j] < '0')
-					return;
-			}
-			j = strlen(temp2);
-			while(j-- > 0)
-			{
-				if(temp2[j] > 'f' || temp2[j] < '0')
-					return;
-			}
-
-			//MAC Addr
-			k = j = strlen(this_char);
-			while(j-- > 0)
-			{
-				this_char[4-k+j] = this_char[j];
-			}
-
-			while(k < 4)
-				this_char[3-k++]='0';
-			this_char[4]='\0';
-
-			//MAC value
-			k = j = strlen(temp2);
-			while(j-- > 0)
-			{
-				temp2[4-k+j] = temp2[j];
-			}
-
-			while(k < 4)
-				temp2[3-k++]='0';
-			temp2[4]='\0';
-
-			AtoH(this_char, temp, 2);
-			eepAddr = *temp*256 + temp[1];
-
-			AtoH(temp2, temp, 2);
-			eepValue = *temp*256 + temp[1];
-
-			RT28xx_EEPROM_WRITE16(pAdapter, eepAddr, eepValue);
-			sprintf(msg+strlen(msg), "[0x%02X]:%02X  ", eepAddr, eepValue);
-		}
-	}
-next:
-	if(strlen(msg) == 1)
-		sprintf(msg+strlen(msg), "===>Error command format!");
-
-
-	// Copy the information into the user buffer
-	wrq->u.data.length = strlen(msg);
-	Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlE2PROM\n"));
-}
-#endif // DBG //
-
-
-
-
-INT Set_TGnWifiTest_Proc(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          arg)
-{
-    if (simple_strtol(arg, 0, 10) == 0)
-        pAd->StaCfg.bTGnWifiTest = FALSE;
-    else
-        pAd->StaCfg.bTGnWifiTest = TRUE;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("IF Set_TGnWifiTest_Proc::(bTGnWifiTest=%d)\n", pAd->StaCfg.bTGnWifiTest));
-	return TRUE;
-}
-
-INT Set_LongRetryLimit_Proc(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	PUCHAR			arg)
-{
-	TX_RTY_CFG_STRUC	tx_rty_cfg;
-	UCHAR				LongRetryLimit = (UCHAR)simple_strtol(arg, 0, 10);
-
-	RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
-	tx_rty_cfg.field.LongRtyLimit = LongRetryLimit;
-	RTMP_IO_WRITE32(pAdapter, TX_RTY_CFG, tx_rty_cfg.word);
-	DBGPRINT(RT_DEBUG_TRACE, ("IF Set_LongRetryLimit_Proc::(tx_rty_cfg=0x%x)\n", tx_rty_cfg.word));
-	return TRUE;
-}
-
-INT Set_ShortRetryLimit_Proc(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	PUCHAR			arg)
-{
-	TX_RTY_CFG_STRUC	tx_rty_cfg;
-	UCHAR				ShortRetryLimit = (UCHAR)simple_strtol(arg, 0, 10);
-
-	RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
-	tx_rty_cfg.field.ShortRtyLimit = ShortRetryLimit;
-	RTMP_IO_WRITE32(pAdapter, TX_RTY_CFG, tx_rty_cfg.word);
-	DBGPRINT(RT_DEBUG_TRACE, ("IF Set_ShortRetryLimit_Proc::(tx_rty_cfg=0x%x)\n", tx_rty_cfg.word));
-	return TRUE;
-}
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-INT Set_Ieee80211dClientMode_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    if (simple_strtol(arg, 0, 10) == 0)
-        pAdapter->StaCfg.IEEE80211dClientMode = Rt802_11_D_None;
-    else if (simple_strtol(arg, 0, 10) == 1)
-        pAdapter->StaCfg.IEEE80211dClientMode = Rt802_11_D_Flexible;
-    else if (simple_strtol(arg, 0, 10) == 2)
-        pAdapter->StaCfg.IEEE80211dClientMode = Rt802_11_D_Strict;
-    else
-        return FALSE;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_Ieee802dMode_Proc::(IEEEE0211dMode=%d)\n", pAdapter->StaCfg.IEEE80211dClientMode));
-    return TRUE;
-}
-#endif // EXT_BUILD_CHANNEL_LIST //
-
-#ifdef CARRIER_DETECTION_SUPPORT
-INT Set_CarrierDetect_Proc(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          arg)
-{
-    if (simple_strtol(arg, 0, 10) == 0)
-        pAd->CommonCfg.CarrierDetect.Enable = FALSE;
-    else
-        pAd->CommonCfg.CarrierDetect.Enable = TRUE;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("IF Set_CarrierDetect_Proc::(CarrierDetect.Enable=%d)\n", pAd->CommonCfg.CarrierDetect.Enable));
-	return TRUE;
-}
-#endif // CARRIER_DETECTION_SUPPORT //
-
-
-INT	Show_Adhoc_MacTable_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PCHAR			extra)
-{
-	INT i;
-
-	sprintf(extra, "\n");
-
-#ifdef DOT11_N_SUPPORT
-	sprintf(extra, "%sHT Operating Mode : %d\n", extra, pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode);
-#endif // DOT11_N_SUPPORT //
-
-	sprintf(extra, "%s\n%-19s%-4s%-4s%-7s%-7s%-7s%-10s%-6s%-6s%-6s%-6s\n", extra,
-			"MAC", "AID", "BSS", "RSSI0", "RSSI1", "RSSI2", "PhMd", "BW", "MCS", "SGI", "STBC");
-
-	for (i=1; i<MAX_LEN_OF_MAC_TABLE; i++)
-	{
-		PMAC_TABLE_ENTRY pEntry = &pAd->MacTab.Content[i];
-
-		if (strlen(extra) > (IW_PRIV_SIZE_MASK - 30))
-		    break;
-		if ((pEntry->ValidAsCLI || pEntry->ValidAsApCli) && (pEntry->Sst == SST_ASSOC))
-		{
-			sprintf(extra, "%s%02X:%02X:%02X:%02X:%02X:%02X  ", extra,
-				pEntry->Addr[0], pEntry->Addr[1], pEntry->Addr[2],
-				pEntry->Addr[3], pEntry->Addr[4], pEntry->Addr[5]);
-			sprintf(extra, "%s%-4d", extra, (int)pEntry->Aid);
-			sprintf(extra, "%s%-4d", extra, (int)pEntry->apidx);
-			sprintf(extra, "%s%-7d", extra, pEntry->RssiSample.AvgRssi0);
-			sprintf(extra, "%s%-7d", extra, pEntry->RssiSample.AvgRssi1);
-			sprintf(extra, "%s%-7d", extra, pEntry->RssiSample.AvgRssi2);
-			sprintf(extra, "%s%-10s", extra, GetPhyMode(pEntry->HTPhyMode.field.MODE));
-			sprintf(extra, "%s%-6s", extra, GetBW(pEntry->HTPhyMode.field.BW));
-			sprintf(extra, "%s%-6d", extra, pEntry->HTPhyMode.field.MCS);
-			sprintf(extra, "%s%-6d", extra, pEntry->HTPhyMode.field.ShortGI);
-			sprintf(extra, "%s%-6d", extra, pEntry->HTPhyMode.field.STBC);
-			sprintf(extra, "%s%-10d, %d, %d%%\n", extra, pEntry->DebugFIFOCount, pEntry->DebugTxCount,
-						(pEntry->DebugTxCount) ? ((pEntry->DebugTxCount-pEntry->DebugFIFOCount)*100/pEntry->DebugTxCount) : 0);
-			sprintf(extra, "%s\n", extra);
-		}
-	}
-
-	return TRUE;
-}
-
-
+#include "../rt2860/sta_ioctl.c"
diff --git a/drivers/staging/rt2870/sta_ioctl.c.patch b/drivers/staging/rt2870/sta_ioctl.c.patch
deleted file mode 100644
index 8672b147a76..00000000000
--- a/drivers/staging/rt2870/sta_ioctl.c.patch
+++ /dev/null
@@ -1,18 +0,0 @@
---- sta_ioctl.c	2008-09-19 14:37:52.000000000 +0800
-+++ sta_ioctl.c.fc9	2008-09-19 14:38:20.000000000 +0800
-@@ -49,15 +49,9 @@
-
- #define GROUP_KEY_NO                4
-
--#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
- #define IWE_STREAM_ADD_EVENT(_A, _B, _C, _D, _E)		iwe_stream_add_event(_A, _B, _C, _D, _E)
- #define IWE_STREAM_ADD_POINT(_A, _B, _C, _D, _E)		iwe_stream_add_point(_A, _B, _C, _D, _E)
- #define IWE_STREAM_ADD_VALUE(_A, _B, _C, _D, _E, _F)	iwe_stream_add_value(_A, _B, _C, _D, _E, _F)
--#else
--#define IWE_STREAM_ADD_EVENT(_A, _B, _C, _D, _E)		iwe_stream_add_event(_B, _C, _D, _E)
--#define IWE_STREAM_ADD_POINT(_A, _B, _C, _D, _E)		iwe_stream_add_point(_B, _C, _D, _E)
--#define IWE_STREAM_ADD_VALUE(_A, _B, _C, _D, _E, _F)	iwe_stream_add_value(_B, _C, _D, _E, _F)
--#endif
-
- extern UCHAR    CipherWpa2Template[];
- extern UCHAR    CipherWpaPskTkip[];
diff --git a/drivers/staging/rt2870/tmp60 b/drivers/staging/rt2870/tmp60
deleted file mode 100644
index 975e4448437..00000000000
--- a/drivers/staging/rt2870/tmp60
+++ /dev/null
@@ -1,7037 +0,0 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-    sta_ioctl.c
-
-    Abstract:
-    IOCTL related subroutines
-
-    Revision History:
-    Who         When          What
-    --------    ----------    ----------------------------------------------
-    Rory Chen   01-03-2003    created
-	Rory Chen   02-14-2005    modify to support RT61
-*/
-
-#include	"rt_config.h"
-
-#ifdef DBG
-extern ULONG    RTDebugLevel;
-#endif
-
-#define NR_WEP_KEYS 				4
-#define WEP_SMALL_KEY_LEN 			(40/8)
-#define WEP_LARGE_KEY_LEN 			(104/8)
-
-#define GROUP_KEY_NO                4
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
-#define IWE_STREAM_ADD_EVENT(_A, _B, _C, _D, _E)		iwe_stream_add_event(_A, _B, _C, _D, _E)
-#define IWE_STREAM_ADD_POINT(_A, _B, _C, _D, _E)		iwe_stream_add_point(_A, _B, _C, _D, _E)
-#define IWE_STREAM_ADD_VALUE(_A, _B, _C, _D, _E, _F)	iwe_stream_add_value(_A, _B, _C, _D, _E, _F)
-#else
-#define IWE_STREAM_ADD_EVENT(_A, _B, _C, _D, _E)		iwe_stream_add_event(_B, _C, _D, _E)
-#define IWE_STREAM_ADD_POINT(_A, _B, _C, _D, _E)		iwe_stream_add_point(_B, _C, _D, _E)
-#define IWE_STREAM_ADD_VALUE(_A, _B, _C, _D, _E, _F)	iwe_stream_add_value(_B, _C, _D, _E, _F)
-#endif
-
-extern UCHAR    CipherWpa2Template[];
-extern UCHAR    CipherWpaPskTkip[];
-extern UCHAR    CipherWpaPskTkipLen;
-
-typedef struct PACKED _RT_VERSION_INFO{
-    UCHAR       DriverVersionW;
-    UCHAR       DriverVersionX;
-    UCHAR       DriverVersionY;
-    UCHAR       DriverVersionZ;
-    UINT        DriverBuildYear;
-    UINT        DriverBuildMonth;
-    UINT        DriverBuildDay;
-} RT_VERSION_INFO, *PRT_VERSION_INFO;
-
-struct iw_priv_args privtab[] = {
-{ RTPRIV_IOCTL_SET,
-  IW_PRIV_TYPE_CHAR | 1024, 0,
-  "set"},
-
-{ RTPRIV_IOCTL_SHOW, 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
-  ""},
-{ RTPRIV_IOCTL_SHOW, IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
-  ""},
-/* --- sub-ioctls definitions --- */
-    { SHOW_CONN_STATUS,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "connStatus" },
-	{ SHOW_DRVIER_VERION,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "driverVer" },
-    { SHOW_BA_INFO,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "bainfo" },
-	{ SHOW_DESC_INFO,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "descinfo" },
-    { RAIO_OFF,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "radio_off" },
-	{ RAIO_ON,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "radio_on" },
-#ifdef QOS_DLS_SUPPORT
-	{ SHOW_DLS_ENTRY_INFO,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "dlsentryinfo" },
-#endif // QOS_DLS_SUPPORT //
-	{ SHOW_CFG_VALUE,
-	  IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "show" },
-	{ SHOW_ADHOC_ENTRY_INFO,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "adhocEntry" },
-
-/* --- sub-ioctls relations --- */
-
-#ifdef DBG
-{ RTPRIV_IOCTL_BBP,
-  IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
-  "bbp"},
-{ RTPRIV_IOCTL_MAC,
-  IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | 1024,
-  "mac"},
-{ RTPRIV_IOCTL_E2P,
-  IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | 1024,
-  "e2p"},
-#endif  /* DBG */
-
-{ RTPRIV_IOCTL_STATISTICS,
-  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
-  "stat"},
-{ RTPRIV_IOCTL_GSITESURVEY,
-  0, IW_PRIV_TYPE_CHAR | 1024,
-  "get_site_survey"},
-};
-
-INT Set_SSID_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-#ifdef WMM_SUPPORT
-INT	Set_WmmCapable_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-#endif
-
-INT Set_NetworkType_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_AuthMode_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_EncrypType_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_DefaultKeyID_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_Key1_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_Key2_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_Key3_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_Key4_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_WPAPSK_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-
-INT Set_PSMode_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-INT Set_Wpa_Support(
-    IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef DBG
-VOID RTMPIoctlBBP(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq);
-
-VOID RTMPIoctlMAC(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq);
-
-VOID RTMPIoctlE2PROM(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  struct iwreq    *wrq);
-#endif // DBG //
-
-
-NDIS_STATUS RTMPWPANoneAddKeyProc(
-    IN  PRTMP_ADAPTER   pAd,
-    IN	PVOID			pBuf);
-
-INT Set_FragTest_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-#ifdef DOT11_N_SUPPORT
-INT Set_TGnWifiTest_Proc(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          arg);
-#endif // DOT11_N_SUPPORT //
-
-INT Set_LongRetryLimit_Proc(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	PUCHAR			arg);
-
-INT Set_ShortRetryLimit_Proc(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	PUCHAR			arg);
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-INT Set_Ieee80211dClientMode_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-#endif // EXT_BUILD_CHANNEL_LIST //
-
-#ifdef CARRIER_DETECTION_SUPPORT
-INT Set_CarrierDetect_Proc(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          arg);
-#endif // CARRIER_DETECTION_SUPPORT //
-
-INT	Show_Adhoc_MacTable_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PCHAR			extra);
-
-static struct {
-	CHAR *name;
-	INT (*set_proc)(PRTMP_ADAPTER pAdapter, PUCHAR arg);
-} *PRTMP_PRIVATE_SET_PROC, RTMP_PRIVATE_SUPPORT_PROC[] = {
-	{"DriverVersion",				Set_DriverVersion_Proc},
-	{"CountryRegion",				Set_CountryRegion_Proc},
-	{"CountryRegionABand",			Set_CountryRegionABand_Proc},
-	{"SSID",						Set_SSID_Proc},
-	{"WirelessMode",				Set_WirelessMode_Proc},
-	{"TxBurst",					Set_TxBurst_Proc},
-	{"TxPreamble",				Set_TxPreamble_Proc},
-	{"TxPower",					Set_TxPower_Proc},
-	{"Channel",					Set_Channel_Proc},
-	{"BGProtection",				Set_BGProtection_Proc},
-	{"RTSThreshold",				Set_RTSThreshold_Proc},
-	{"FragThreshold",				Set_FragThreshold_Proc},
-#ifdef DOT11_N_SUPPORT
-	{"HtBw",		                Set_HtBw_Proc},
-	{"HtMcs",		                Set_HtMcs_Proc},
-	{"HtGi",		                Set_HtGi_Proc},
-	{"HtOpMode",		            Set_HtOpMode_Proc},
-	{"HtExtcha",		            Set_HtExtcha_Proc},
-	{"HtMpduDensity",		        Set_HtMpduDensity_Proc},
-	{"HtBaWinSize",		        	Set_HtBaWinSize_Proc},
-	{"HtRdg",		        		Set_HtRdg_Proc},
-	{"HtAmsdu",		        		Set_HtAmsdu_Proc},
-	{"HtAutoBa",		        	Set_HtAutoBa_Proc},
-	{"HtBaDecline",					Set_BADecline_Proc},
-	{"HtProtect",		        	Set_HtProtect_Proc},
-	{"HtMimoPs",		        	Set_HtMimoPs_Proc},
-#endif // DOT11_N_SUPPORT //
-
-#ifdef AGGREGATION_SUPPORT
-	{"PktAggregate",				Set_PktAggregate_Proc},
-#endif
-
-#ifdef WMM_SUPPORT
-	{"WmmCapable",					Set_WmmCapable_Proc},
-#endif
-	{"IEEE80211H",					Set_IEEE80211H_Proc},
-    {"NetworkType",                 Set_NetworkType_Proc},
-	{"AuthMode",					Set_AuthMode_Proc},
-	{"EncrypType",					Set_EncrypType_Proc},
-	{"DefaultKeyID",				Set_DefaultKeyID_Proc},
-	{"Key1",						Set_Key1_Proc},
-	{"Key2",						Set_Key2_Proc},
-	{"Key3",						Set_Key3_Proc},
-	{"Key4",						Set_Key4_Proc},
-	{"WPAPSK",						Set_WPAPSK_Proc},
-	{"ResetCounter",				Set_ResetStatCounter_Proc},
-	{"PSMode",                      Set_PSMode_Proc},
-#ifdef DBG
-	{"Debug",						Set_Debug_Proc},
-#endif
-
-#ifdef RALINK_ATE
-	{"ATE",							Set_ATE_Proc},
-	{"ATEDA",						Set_ATE_DA_Proc},
-	{"ATESA",						Set_ATE_SA_Proc},
-	{"ATEBSSID",					Set_ATE_BSSID_Proc},
-	{"ATECHANNEL",					Set_ATE_CHANNEL_Proc},
-	{"ATETXPOW0",					Set_ATE_TX_POWER0_Proc},
-	{"ATETXPOW1",					Set_ATE_TX_POWER1_Proc},
-	{"ATETXANT",					Set_ATE_TX_Antenna_Proc},
-	{"ATERXANT",					Set_ATE_RX_Antenna_Proc},
-	{"ATETXFREQOFFSET",				Set_ATE_TX_FREQOFFSET_Proc},
-	{"ATETXBW",						Set_ATE_TX_BW_Proc},
-	{"ATETXLEN",					Set_ATE_TX_LENGTH_Proc},
-	{"ATETXCNT",					Set_ATE_TX_COUNT_Proc},
-	{"ATETXMCS",					Set_ATE_TX_MCS_Proc},
-	{"ATETXMODE",					Set_ATE_TX_MODE_Proc},
-	{"ATETXGI",						Set_ATE_TX_GI_Proc},
-	{"ATERXFER",					Set_ATE_RX_FER_Proc},
-	{"ATERRF",						Set_ATE_Read_RF_Proc},
-	{"ATEWRF1",						Set_ATE_Write_RF1_Proc},
-	{"ATEWRF2",						Set_ATE_Write_RF2_Proc},
-	{"ATEWRF3",						Set_ATE_Write_RF3_Proc},
-	{"ATEWRF4",						Set_ATE_Write_RF4_Proc},
-	{"ATELDE2P",				    Set_ATE_Load_E2P_Proc},
-	{"ATERE2P",						Set_ATE_Read_E2P_Proc},
-	{"ATESHOW",						Set_ATE_Show_Proc},
-	{"ATEHELP",						Set_ATE_Help_Proc},
-
-#ifdef RALINK_28xx_QA
-	{"TxStop",						Set_TxStop_Proc},
-	{"RxStop",						Set_RxStop_Proc},
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-    {"WpaSupport",                  Set_Wpa_Support},
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-
-
-	{"FixedTxMode",                 Set_FixedTxMode_Proc},
-#ifdef CONFIG_APSTA_MIXED_SUPPORT
-	{"OpMode",						Set_OpMode_Proc},
-#endif // CONFIG_APSTA_MIXED_SUPPORT //
-#ifdef DOT11_N_SUPPORT
-    {"TGnWifiTest",                 Set_TGnWifiTest_Proc},
-    {"ForceGF",		        		Set_ForceGF_Proc},
-#endif // DOT11_N_SUPPORT //
-#ifdef QOS_DLS_SUPPORT
-	{"DlsAddEntry",					Set_DlsAddEntry_Proc},
-	{"DlsTearDownEntry",			Set_DlsTearDownEntry_Proc},
-#endif // QOS_DLS_SUPPORT //
-	{"LongRetry",	        		Set_LongRetryLimit_Proc},
-	{"ShortRetry",	        		Set_ShortRetryLimit_Proc},
-#ifdef EXT_BUILD_CHANNEL_LIST
-	{"11dClientMode",				Set_Ieee80211dClientMode_Proc},
-#endif // EXT_BUILD_CHANNEL_LIST //
-#ifdef CARRIER_DETECTION_SUPPORT
-	{"CarrierDetect",				Set_CarrierDetect_Proc},
-#endif // CARRIER_DETECTION_SUPPORT //
-
-	{NULL,}
-};
-
-
-VOID RTMPAddKey(
-	IN	PRTMP_ADAPTER	    pAd,
-	IN	PNDIS_802_11_KEY    pKey)
-{
-	ULONG				KeyIdx;
-	MAC_TABLE_ENTRY  	*pEntry;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("RTMPAddKey ------>\n"));
-
-	if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-	{
-		if (pKey->KeyIndex & 0x80000000)
-		{
-		    if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
-            {
-                NdisZeroMemory(pAd->StaCfg.PMK, 32);
-                NdisMoveMemory(pAd->StaCfg.PMK, pKey->KeyMaterial, pKey->KeyLength);
-                goto end;
-            }
-		    // Update PTK
-		    NdisZeroMemory(&pAd->SharedKey[BSS0][0], sizeof(CIPHER_KEY));
-            pAd->SharedKey[BSS0][0].KeyLen = LEN_TKIP_EK;
-            NdisMoveMemory(pAd->SharedKey[BSS0][0].Key, pKey->KeyMaterial, LEN_TKIP_EK);
-#ifdef WPA_SUPPLICANT_SUPPORT
-            if (pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled)
-            {
-                NdisMoveMemory(pAd->SharedKey[BSS0][0].RxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK);
-                NdisMoveMemory(pAd->SharedKey[BSS0][0].TxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK);
-            }
-            else
-#endif // WPA_SUPPLICANT_SUPPORT //
-            {
-            	NdisMoveMemory(pAd->SharedKey[BSS0][0].TxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK);
-                NdisMoveMemory(pAd->SharedKey[BSS0][0].RxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK);
-            }
-
-            // Decide its ChiperAlg
-        	if (pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled)
-        		pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_TKIP;
-        	else if (pAd->StaCfg.PairCipher == Ndis802_11Encryption3Enabled)
-        		pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_AES;
-        	else
-        		pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_NONE;
-
-            // Update these related information to MAC_TABLE_ENTRY
-        	pEntry = &pAd->MacTab.Content[BSSID_WCID];
-            NdisMoveMemory(pEntry->PairwiseKey.Key, pAd->SharedKey[BSS0][0].Key, LEN_TKIP_EK);
-        	NdisMoveMemory(pEntry->PairwiseKey.RxMic, pAd->SharedKey[BSS0][0].RxMic, LEN_TKIP_RXMICK);
-        	NdisMoveMemory(pEntry->PairwiseKey.TxMic, pAd->SharedKey[BSS0][0].TxMic, LEN_TKIP_TXMICK);
-        	pEntry->PairwiseKey.CipherAlg = pAd->SharedKey[BSS0][0].CipherAlg;
-
-        	// Update pairwise key information to ASIC Shared Key Table
-        	AsicAddSharedKeyEntry(pAd,
-        						  BSS0,
-        						  0,
-        						  pAd->SharedKey[BSS0][0].CipherAlg,
-        						  pAd->SharedKey[BSS0][0].Key,
-        						  pAd->SharedKey[BSS0][0].TxMic,
-        						  pAd->SharedKey[BSS0][0].RxMic);
-
-        	// Update ASIC WCID attribute table and IVEIV table
-        	RTMPAddWcidAttributeEntry(pAd,
-        							  BSS0,
-        							  0,
-        							  pAd->SharedKey[BSS0][0].CipherAlg,
-        							  pEntry);
-
-            if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA2)
-            {
-                // set 802.1x port control
-	            //pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-				STA_PORT_SECURED(pAd);
-
-                // Indicate Connected for GUI
-                pAd->IndicateMediaState = NdisMediaStateConnected;
-            }
-		}
-        else
-        {
-            // Update GTK
-            pAd->StaCfg.DefaultKeyId = (pKey->KeyIndex & 0xFF);
-            NdisZeroMemory(&pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId], sizeof(CIPHER_KEY));
-            pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].KeyLen = LEN_TKIP_EK;
-            NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key, pKey->KeyMaterial, LEN_TKIP_EK);
-#ifdef WPA_SUPPLICANT_SUPPORT
-            if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption2Enabled)
-            {
-                NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].RxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK);
-                NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].TxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK);
-            }
-            else
-#endif // WPA_SUPPLICANT_SUPPORT //
-            {
-            	NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].TxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK);
-                NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].RxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK);
-            }
-
-            // Update Shared Key CipherAlg
-    		pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_NONE;
-    		if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption2Enabled)
-    			pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_TKIP;
-    		else if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled)
-    			pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_AES;
-
-            // Update group key information to ASIC Shared Key Table
-        	AsicAddSharedKeyEntry(pAd,
-        						  BSS0,
-        						  pAd->StaCfg.DefaultKeyId,
-        						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg,
-        						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key,
-        						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].TxMic,
-        						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].RxMic);
-
-        	// Update ASIC WCID attribute table and IVEIV table
-        	RTMPAddWcidAttributeEntry(pAd,
-        							  BSS0,
-        							  pAd->StaCfg.DefaultKeyId,
-        							  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg,
-        							  NULL);
-
-            // set 802.1x port control
-	        //pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-			STA_PORT_SECURED(pAd);
-
-            // Indicate Connected for GUI
-            pAd->IndicateMediaState = NdisMediaStateConnected;
-        }
-	}
-	else	// dynamic WEP from wpa_supplicant
-	{
-		UCHAR	CipherAlg;
-    	PUCHAR	Key;
-
-		if(pKey->KeyLength == 32)
-			goto end;
-
-		KeyIdx = pKey->KeyIndex & 0x0fffffff;
-
-		if (KeyIdx < 4)
-		{
-			// it is a default shared key, for Pairwise key setting
-			if (pKey->KeyIndex & 0x80000000)
-			{
-				pEntry = MacTableLookup(pAd, pKey->BSSID);
-
-				if (pEntry)
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("RTMPAddKey: Set Pair-wise Key\n"));
-
-					// set key material and key length
- 					pEntry->PairwiseKey.KeyLen = (UCHAR)pKey->KeyLength;
-					NdisMoveMemory(pEntry->PairwiseKey.Key, &pKey->KeyMaterial, pKey->KeyLength);
-
-					// set Cipher type
-					if (pKey->KeyLength == 5)
-						pEntry->PairwiseKey.CipherAlg = CIPHER_WEP64;
-					else
-						pEntry->PairwiseKey.CipherAlg = CIPHER_WEP128;
-
-					// Add Pair-wise key to Asic
-					AsicAddPairwiseKeyEntry(
-						pAd,
-						pEntry->Addr,
-						(UCHAR)pEntry->Aid,
-                		&pEntry->PairwiseKey);
-
-					// update WCID attribute table and IVEIV table for this entry
-					RTMPAddWcidAttributeEntry(
-						pAd,
-						BSS0,
-						KeyIdx, // The value may be not zero
-						pEntry->PairwiseKey.CipherAlg,
-						pEntry);
-
-				}
-			}
-			else
-            {
-				// Default key for tx (shared key)
-				pAd->StaCfg.DefaultKeyId = (UCHAR) KeyIdx;
-
-				// set key material and key length
-				pAd->SharedKey[BSS0][KeyIdx].KeyLen = (UCHAR) pKey->KeyLength;
-				NdisMoveMemory(pAd->SharedKey[BSS0][KeyIdx].Key, &pKey->KeyMaterial, pKey->KeyLength);
-
-				// Set Ciper type
-				if (pKey->KeyLength == 5)
-					pAd->SharedKey[BSS0][KeyIdx].CipherAlg = CIPHER_WEP64;
-				else
-					pAd->SharedKey[BSS0][KeyIdx].CipherAlg = CIPHER_WEP128;
-
-    			CipherAlg = pAd->SharedKey[BSS0][KeyIdx].CipherAlg;
-    			Key = pAd->SharedKey[BSS0][KeyIdx].Key;
-
-				// Set Group key material to Asic
-    			AsicAddSharedKeyEntry(pAd, BSS0, KeyIdx, CipherAlg, Key, NULL, NULL);
-
-				// Update WCID attribute table and IVEIV table for this group key table
-				RTMPAddWcidAttributeEntry(pAd, BSS0, KeyIdx, CipherAlg, NULL);
-
-			}
-		}
-	}
-end:
-	return;
-}
-
-char * rtstrchr(const char * s, int c)
-{
-    for(; *s != (char) c; ++s)
-        if (*s == '\0')
-            return NULL;
-    return (char *) s;
-}
-
-/*
-This is required for LinEX2004/kernel2.6.7 to provide iwlist scanning function
-*/
-
-int
-rt_ioctl_giwname(struct net_device *dev,
-		   struct iw_request_info *info,
-		   char *name, char *extra)
-{
-//	PRTMP_ADAPTER pAdapter = (PRTMP_ADAPTER) dev->priv;
-
-#ifdef RT2870
-	strncpy(name, "RT2870 Wireless", IFNAMSIZ);
-#endif // RT2870 //
-	return 0;
-}
-
-int rt_ioctl_siwfreq(struct net_device *dev,
-			struct iw_request_info *info,
-			struct iw_freq *freq, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = (PRTMP_ADAPTER) dev->priv;
-	int 	chan = -1;
-
-    //check if the interface is down
-    if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-        return -ENETDOWN;
-    }
-
-
-	if (freq->e > 1)
-		return -EINVAL;
-
-	if((freq->e == 0) && (freq->m <= 1000))
-		chan = freq->m;	// Setting by channel number
-	else
-		MAP_KHZ_TO_CHANNEL_ID( (freq->m /100) , chan); // Setting by frequency - search the table , like 2.412G, 2.422G,
-
-    if (ChannelSanity(pAdapter, chan) == TRUE)
-    {
-	pAdapter->CommonCfg.Channel = chan;
-	DBGPRINT(RT_DEBUG_ERROR, ("==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x%x] (Channel=%d)\n", SIOCSIWFREQ, pAdapter->CommonCfg.Channel));
-    }
-    else
-        return -EINVAL;
-
-	return 0;
-}
-int rt_ioctl_giwfreq(struct net_device *dev,
-		   struct iw_request_info *info,
-		   struct iw_freq *freq, char *extra)
-{
-    VIRTUAL_ADAPTER *pVirtualAd = NULL;
-	PRTMP_ADAPTER pAdapter = NULL;
-	UCHAR ch;
-	ULONG	m;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->priv;
-	}
-	else
-	{
-		pVirtualAd = dev->priv;
-		if (pVirtualAd && pVirtualAd->RtmpDev)
-			pAdapter = pVirtualAd->RtmpDev->priv;
-	}
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-		ch = pAdapter->CommonCfg.Channel;
-
-	DBGPRINT(RT_DEBUG_TRACE,("==>rt_ioctl_giwfreq  %d\n", ch));
-
-    MAP_CHANNEL_ID_TO_KHZ(ch, m);
-	freq->m = m * 100;
-	freq->e = 1;
-	return 0;
-}
-
-int rt_ioctl_siwmode(struct net_device *dev,
-		   struct iw_request_info *info,
-		   __u32 *mode, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = (PRTMP_ADAPTER) dev->priv;
-
-	//check if the interface is down
-    if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-    	DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-       	return -ENETDOWN;
-    }
-
-	switch (*mode)
-	{
-		case IW_MODE_ADHOC:
-			Set_NetworkType_Proc(pAdapter, "Adhoc");
-			break;
-		case IW_MODE_INFRA:
-			Set_NetworkType_Proc(pAdapter, "Infra");
-			break;
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,4,20))
-        case IW_MODE_MONITOR:
-			Set_NetworkType_Proc(pAdapter, "Monitor");
-			break;
-#endif
-		default:
-			DBGPRINT(RT_DEBUG_TRACE, ("===>rt_ioctl_siwmode::SIOCSIWMODE (unknown %d)\n", *mode));
-			return -EINVAL;
-	}
-
-	// Reset Ralink supplicant to not use, it will be set to start when UI set PMK key
-	pAdapter->StaCfg.WpaState = SS_NOTUSE;
-
-	return 0;
-}
-
-int rt_ioctl_giwmode(struct net_device *dev,
-		   struct iw_request_info *info,
-		   __u32 *mode, char *extra)
-{
-	PRTMP_ADAPTER 	pAdapter = NULL;
-	VIRTUAL_ADAPTER *pVirtualAd = NULL;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->priv;
-	}
-	else
-	{
-		pVirtualAd = dev->priv;
-		if (pVirtualAd && pVirtualAd->RtmpDev)
-			pAdapter = pVirtualAd->RtmpDev->priv;
-	}
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-	if (ADHOC_ON(pAdapter))
-		*mode = IW_MODE_ADHOC;
-    else if (INFRA_ON(pAdapter))
-		*mode = IW_MODE_INFRA;
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,4,20))
-    else if (MONITOR_ON(pAdapter))
-    {
-        *mode = IW_MODE_MONITOR;
-    }
-#endif
-    else
-        *mode = IW_MODE_AUTO;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("==>rt_ioctl_giwmode(mode=%d)\n", *mode));
-	return 0;
-}
-
-int rt_ioctl_siwsens(struct net_device *dev,
-		   struct iw_request_info *info,
-		   char *name, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = (PRTMP_ADAPTER) dev->priv;
-
-	//check if the interface is down
-    	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    	{
-        	DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-        	return -ENETDOWN;
-    	}
-
-	return 0;
-}
-
-int rt_ioctl_giwsens(struct net_device *dev,
-		   struct iw_request_info *info,
-		   char *name, char *extra)
-{
-	return 0;
-}
-
-int rt_ioctl_giwrange(struct net_device *dev,
-		   struct iw_request_info *info,
-		   struct iw_point *data, char *extra)
-{
-	PRTMP_ADAPTER 	pAdapter = NULL;
-	VIRTUAL_ADAPTER *pVirtualAd = NULL;
-	struct iw_range *range = (struct iw_range *) extra;
-	u16 val;
-	int i;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->priv;
-	}
-	else
-	{
-		pVirtualAd = dev->priv;
-		if (pVirtualAd && pVirtualAd->RtmpDev)
-			pAdapter = pVirtualAd->RtmpDev->priv;
-	}
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE ,("===>rt_ioctl_giwrange\n"));
-	data->length = sizeof(struct iw_range);
-	memset(range, 0, sizeof(struct iw_range));
-
-	range->txpower_capa = IW_TXPOW_DBM;
-
-	if (INFRA_ON(pAdapter)||ADHOC_ON(pAdapter))
-	{
-		range->min_pmp = 1 * 1024;
-		range->max_pmp = 65535 * 1024;
-		range->min_pmt = 1 * 1024;
-		range->max_pmt = 1000 * 1024;
-		range->pmp_flags = IW_POWER_PERIOD;
-		range->pmt_flags = IW_POWER_TIMEOUT;
-		range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT |
-			IW_POWER_UNICAST_R | IW_POWER_ALL_R;
-	}
-
-	range->we_version_compiled = WIRELESS_EXT;
-	range->we_version_source = 14;
-
-	range->retry_capa = IW_RETRY_LIMIT;
-	range->retry_flags = IW_RETRY_LIMIT;
-	range->min_retry = 0;
-	range->max_retry = 255;
-
-	range->num_channels =  pAdapter->ChannelListNum;
-
-	val = 0;
-	for (i = 1; i <= range->num_channels; i++)
-	{
-		u32 m;
-		range->freq[val].i = pAdapter->ChannelList[i-1].Channel;
-		MAP_CHANNEL_ID_TO_KHZ(pAdapter->ChannelList[i-1].Channel, m);
-		range->freq[val].m = m * 100; /* HZ */
-
-		range->freq[val].e = 1;
-		val++;
-		if (val == IW_MAX_FREQUENCIES)
-			break;
-	}
-	range->num_frequency = val;
-
-	range->max_qual.qual = 100; /* what is correct max? This was not
-					* documented exactly. At least
-					* 69 has been observed. */
-	range->max_qual.level = 0; /* dB */
-	range->max_qual.noise = 0; /* dB */
-
-	/* What would be suitable values for "average/typical" qual? */
-	range->avg_qual.qual = 20;
-	range->avg_qual.level = -60;
-	range->avg_qual.noise = -95;
-	range->sensitivity = 3;
-
-	range->max_encoding_tokens = NR_WEP_KEYS;
-	range->num_encoding_sizes = 2;
-	range->encoding_size[0] = 5;
-	range->encoding_size[1] = 13;
-
-	range->min_rts = 0;
-	range->max_rts = 2347;
-	range->min_frag = 256;
-	range->max_frag = 2346;
-
-#if WIRELESS_EXT > 17
-	/* IW_ENC_CAPA_* bit field */
-	range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 |
-					IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP;
-#endif
-
-	return 0;
-}
-
-int rt_ioctl_siwap(struct net_device *dev,
-		      struct iw_request_info *info,
-		      struct sockaddr *ap_addr, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = (PRTMP_ADAPTER) dev->priv;
-    NDIS_802_11_MAC_ADDRESS Bssid;
-
-	//check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-       	DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-       	return -ENETDOWN;
-    }
-
-	if (pAdapter->Mlme.CntlMachine.CurrState != CNTL_IDLE)
-    {
-        RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-        DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
-    }
-
-    // tell CNTL state machine to call NdisMSetInformationComplete() after completing
-    // this request, because this request is initiated by NDIS.
-    pAdapter->MlmeAux.CurrReqIsFromNdis = FALSE;
-	// Prevent to connect AP again in STAMlmePeriodicExec
-	pAdapter->MlmeAux.AutoReconnectSsidLen= 32;
-
-    memset(Bssid, 0, MAC_ADDR_LEN);
-    memcpy(Bssid, ap_addr->sa_data, MAC_ADDR_LEN);
-    MlmeEnqueue(pAdapter,
-                MLME_CNTL_STATE_MACHINE,
-                OID_802_11_BSSID,
-                sizeof(NDIS_802_11_MAC_ADDRESS),
-                (VOID *)&Bssid);
-
-    DBGPRINT(RT_DEBUG_TRACE, ("IOCTL::SIOCSIWAP %02x:%02x:%02x:%02x:%02x:%02x\n",
-        Bssid[0], Bssid[1], Bssid[2], Bssid[3], Bssid[4], Bssid[5]));
-
-	return 0;
-}
-
-int rt_ioctl_giwap(struct net_device *dev,
-		      struct iw_request_info *info,
-		      struct sockaddr *ap_addr, char *extra)
-{
-	PRTMP_ADAPTER 	pAdapter = NULL;
-	VIRTUAL_ADAPTER *pVirtualAd = NULL;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->priv;
-	}
-	else
-	{
-		pVirtualAd = dev->priv;
-		if (pVirtualAd && pVirtualAd->RtmpDev)
-			pAdapter = pVirtualAd->RtmpDev->priv;
-	}
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-	if (INFRA_ON(pAdapter) || ADHOC_ON(pAdapter))
-	{
-		ap_addr->sa_family = ARPHRD_ETHER;
-		memcpy(ap_addr->sa_data, &pAdapter->CommonCfg.Bssid, ETH_ALEN);
-	}
-#ifdef WPA_SUPPLICANT_SUPPORT
-    // Add for RT2870
-    else if (pAdapter->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
-    {
-        ap_addr->sa_family = ARPHRD_ETHER;
-        memcpy(ap_addr->sa_data, &pAdapter->MlmeAux.Bssid, ETH_ALEN);
-    }
-#endif // WPA_SUPPLICANT_SUPPORT //
-	else
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("IOCTL::SIOCGIWAP(=EMPTY)\n"));
-		return -ENOTCONN;
-	}
-
-	return 0;
-}
-
-/*
- * Units are in db above the noise floor. That means the
- * rssi values reported in the tx/rx descriptors in the
- * driver are the SNR expressed in db.
- *
- * If you assume that the noise floor is -95, which is an
- * excellent assumption 99.5 % of the time, then you can
- * derive the absolute signal level (i.e. -95 + rssi).
- * There are some other slight factors to take into account
- * depending on whether the rssi measurement is from 11b,
- * 11g, or 11a.   These differences are at most 2db and
- * can be documented.
- *
- * NB: various calculations are based on the orinoco/wavelan
- *     drivers for compatibility
- */
-static void set_quality(PRTMP_ADAPTER pAdapter,
-                        struct iw_quality *iq,
-                        signed char rssi)
-{
-	__u8 ChannelQuality;
-
-	// Normalize Rssi
-	if (rssi >= -50)
-		ChannelQuality = 100;
-	else if (rssi >= -80) // between -50 ~ -80dbm
-		ChannelQuality = (__u8)(24 + ((rssi + 80) * 26)/10);
-	else if (rssi >= -90)   // between -80 ~ -90dbm
-        ChannelQuality = (__u8)((rssi + 90) * 26)/10;
-	else
-		ChannelQuality = 0;
-
-    iq->qual = (__u8)ChannelQuality;
-
-    iq->level = (__u8)(rssi);
-    iq->noise = (pAdapter->BbpWriteLatch[66] > pAdapter->BbpTuning.FalseCcaUpperThreshold) ? ((__u8)pAdapter->BbpTuning.FalseCcaUpperThreshold) : ((__u8) pAdapter->BbpWriteLatch[66]); 	// noise level (dBm)
-    iq->noise += 256 - 143;
-    iq->updated = pAdapter->iw_stats.qual.updated;
-}
-
-int rt_ioctl_iwaplist(struct net_device *dev,
-			struct iw_request_info *info,
-			struct iw_point *data, char *extra)
-{
- 	PRTMP_ADAPTER pAdapter = (PRTMP_ADAPTER) dev->priv;
-
-	struct sockaddr addr[IW_MAX_AP];
-	struct iw_quality qual[IW_MAX_AP];
-	int i;
-
-   	//check if the interface is down
-    if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-       	DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-		data->length = 0;
-		return 0;
-        //return -ENETDOWN;
-	}
-
-	for (i = 0; i <IW_MAX_AP ; i++)
-	{
-		if (i >=  pAdapter->ScanTab.BssNr)
-			break;
-		addr[i].sa_family = ARPHRD_ETHER;
-			memcpy(addr[i].sa_data, &pAdapter->ScanTab.BssEntry[i].Bssid, MAC_ADDR_LEN);
-		set_quality(pAdapter, &qual[i], pAdapter->ScanTab.BssEntry[i].Rssi);
-	}
-	data->length = i;
-	memcpy(extra, &addr, i*sizeof(addr[0]));
-	data->flags = 1;		/* signal quality present (sort of) */
-	memcpy(extra + i*sizeof(addr[0]), &qual, i*sizeof(qual[i]));
-
-	return 0;
-}
-
-#ifdef SIOCGIWSCAN
-int rt_ioctl_siwscan(struct net_device *dev,
-			struct iw_request_info *info,
-			struct iw_point *data, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = (PRTMP_ADAPTER) dev->priv;
-
-	ULONG								Now;
-	int Status = NDIS_STATUS_SUCCESS;
-
-	//check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-		return -ENETDOWN;
-	}
-
-	if (MONITOR_ON(pAdapter))
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("!!! Driver is in Monitor Mode now !!!\n"));
-        return -EINVAL;
-    }
-
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-	if (pAdapter->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE)
-	{
-		pAdapter->StaCfg.WpaSupplicantScanCount++;
-	}
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-    pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE;
-	if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-		return 0;
-	do{
-		Now = jiffies;
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-		if ((pAdapter->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE) &&
-			(pAdapter->StaCfg.WpaSupplicantScanCount > 3))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("!!! WpaSupplicantScanCount > 3\n"));
-			Status = NDIS_STATUS_SUCCESS;
-			break;
-		}
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-		if ((OPSTATUS_TEST_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED)) &&
-			((pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA) ||
-			(pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK)) &&
-			(pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("!!! Link UP, Port Not Secured! ignore this set::OID_802_11_BSSID_LIST_SCAN\n"));
-			Status = NDIS_STATUS_SUCCESS;
-			break;
-		}
-
-		if (pAdapter->Mlme.CntlMachine.CurrState != CNTL_IDLE)
-		{
-			RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-			DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
-		}
-
-		// tell CNTL state machine to call NdisMSetInformationComplete() after completing
-		// this request, because this request is initiated by NDIS.
-		pAdapter->MlmeAux.CurrReqIsFromNdis = FALSE;
-		// Reset allowed scan retries
-		pAdapter->StaCfg.ScanCnt = 0;
-		pAdapter->StaCfg.LastScanTime = Now;
-
-		MlmeEnqueue(pAdapter,
-			MLME_CNTL_STATE_MACHINE,
-			OID_802_11_BSSID_LIST_SCAN,
-			0,
-			NULL);
-
-		Status = NDIS_STATUS_SUCCESS;
-		RT28XX_MLME_HANDLER(pAdapter);
-	}while(0);
-	return 0;
-}
-
-int rt_ioctl_giwscan(struct net_device *dev,
-			struct iw_request_info *info,
-			struct iw_point *data, char *extra)
-{
-
-	PRTMP_ADAPTER pAdapter = (PRTMP_ADAPTER) dev->priv;
-	int i=0;
-	char *current_ev = extra, *previous_ev = extra;
-	char *end_buf;
-	char *current_val, custom[MAX_CUSTOM_LEN] = {0};
-#ifndef IWEVGENIE
-	char idx;
-#endif // IWEVGENIE //
-	struct iw_event iwe;
-
-	if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-    {
-		/*
-		 * Still scanning, indicate the caller should try again.
-		 */
-		return -EAGAIN;
-	}
-
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-	if (pAdapter->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE)
-	{
-		pAdapter->StaCfg.WpaSupplicantScanCount = 0;
-	}
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-	if (pAdapter->ScanTab.BssNr == 0)
-	{
-		data->length = 0;
-		return 0;
-	}
-
-#if WIRELESS_EXT >= 17
-    if (data->length > 0)
-        end_buf = extra + data->length;
-    else
-        end_buf = extra + IW_SCAN_MAX_DATA;
-#else
-    end_buf = extra + IW_SCAN_MAX_DATA;
-#endif
-
-	for (i = 0; i < pAdapter->ScanTab.BssNr; i++)
-	{
-		if (current_ev >= end_buf)
-        {
-#if WIRELESS_EXT >= 17
-            return -E2BIG;
-#else
-			break;
-#endif
-        }
-
-		//MAC address
-		//================================
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = SIOCGIWAP;
-		iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
-				memcpy(iwe.u.ap_addr.sa_data, &pAdapter->ScanTab.BssEntry[i].Bssid, ETH_ALEN);
-
-        previous_ev = current_ev;
-		current_ev = IWE_STREAM_ADD_EVENT(info, current_ev,end_buf, &iwe, IW_EV_ADDR_LEN);
-        if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-            return -E2BIG;
-#else
-			break;
-#endif
-
-		//ESSID
-		//================================
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = SIOCGIWESSID;
-		iwe.u.data.length = pAdapter->ScanTab.BssEntry[i].SsidLen;
-		iwe.u.data.flags = 1;
-
-        previous_ev = current_ev;
-		current_ev = IWE_STREAM_ADD_POINT(info, current_ev,end_buf, &iwe, pAdapter->ScanTab.BssEntry[i].Ssid);
-        if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-            return -E2BIG;
-#else
-			break;
-#endif
-
-		//Network Type
-		//================================
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = SIOCGIWMODE;
-		if (pAdapter->ScanTab.BssEntry[i].BssType == Ndis802_11IBSS)
-		{
-			iwe.u.mode = IW_MODE_ADHOC;
-		}
-		else if (pAdapter->ScanTab.BssEntry[i].BssType == Ndis802_11Infrastructure)
-		{
-			iwe.u.mode = IW_MODE_INFRA;
-		}
-		else
-		{
-			iwe.u.mode = IW_MODE_AUTO;
-		}
-		iwe.len = IW_EV_UINT_LEN;
-
-        previous_ev = current_ev;
-		current_ev = IWE_STREAM_ADD_EVENT(info, current_ev, end_buf, &iwe,  IW_EV_UINT_LEN);
-        if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-            return -E2BIG;
-#else
-			break;
-#endif
-
-		//Channel and Frequency
-		//================================
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = SIOCGIWFREQ;
-		if (INFRA_ON(pAdapter) || ADHOC_ON(pAdapter))
-			iwe.u.freq.m = pAdapter->ScanTab.BssEntry[i].Channel;
-		else
-			iwe.u.freq.m = pAdapter->ScanTab.BssEntry[i].Channel;
-		iwe.u.freq.e = 0;
-		iwe.u.freq.i = 0;
-
-		previous_ev = current_ev;
-		current_ev = IWE_STREAM_ADD_EVENT(info, current_ev,end_buf, &iwe, IW_EV_FREQ_LEN);
-        if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-            return -E2BIG;
-#else
-			break;
-#endif
-
-        //Add quality statistics
-        //================================
-        memset(&iwe, 0, sizeof(iwe));
-    	iwe.cmd = IWEVQUAL;
-    	iwe.u.qual.level = 0;
-    	iwe.u.qual.noise = 0;
-        set_quality(pAdapter, &iwe.u.qual, pAdapter->ScanTab.BssEntry[i].Rssi);
-    	current_ev = IWE_STREAM_ADD_EVENT(info, current_ev, end_buf, &iwe, IW_EV_QUAL_LEN);
-        if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-            return -E2BIG;
-#else
-			break;
-#endif
-
-		//Encyption key
-		//================================
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = SIOCGIWENCODE;
-		if (CAP_IS_PRIVACY_ON (pAdapter->ScanTab.BssEntry[i].CapabilityInfo ))
-			iwe.u.data.flags =IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
-		else
-			iwe.u.data.flags = IW_ENCODE_DISABLED;
-
-        previous_ev = current_ev;
-        current_ev = IWE_STREAM_ADD_POINT(info, current_ev, end_buf,&iwe, (char *)pAdapter->SharedKey[BSS0][(iwe.u.data.flags & IW_ENCODE_INDEX)-1].Key);
-        if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-            return -E2BIG;
-#else
-			break;
-#endif
-
-		//Bit Rate
-		//================================
-		if (pAdapter->ScanTab.BssEntry[i].SupRateLen)
-        {
-            UCHAR tmpRate = pAdapter->ScanTab.BssEntry[i].SupRate[pAdapter->ScanTab.BssEntry[i].SupRateLen-1];
-			memset(&iwe, 0, sizeof(iwe));
-			iwe.cmd = SIOCGIWRATE;
-    		current_val = current_ev + IW_EV_LCP_LEN;
-            if (tmpRate == 0x82)
-                iwe.u.bitrate.value =  1 * 1000000;
-            else if (tmpRate == 0x84)
-                iwe.u.bitrate.value =  2 * 1000000;
-            else if (tmpRate == 0x8B)
-                iwe.u.bitrate.value =  5.5 * 1000000;
-            else if (tmpRate == 0x96)
-                iwe.u.bitrate.value =  11 * 1000000;
-            else
-    		    iwe.u.bitrate.value =  (tmpRate/2) * 1000000;
-
-			iwe.u.bitrate.disabled = 0;
-			current_val = IWE_STREAM_ADD_VALUE(info, current_ev,
-				current_val, end_buf, &iwe,
-    			IW_EV_PARAM_LEN);
-
-        	if((current_val-current_ev)>IW_EV_LCP_LEN)
-            	current_ev = current_val;
-        	else
-#if WIRELESS_EXT >= 17
-                return -E2BIG;
-#else
-			    break;
-#endif
-        }
-
-#ifdef IWEVGENIE
-		//WPA IE
-		if (pAdapter->ScanTab.BssEntry[i].WpaIE.IELen > 0)
-		{
-			memset(&iwe, 0, sizeof(iwe));
-			memset(&custom[0], 0, MAX_CUSTOM_LEN);
-			memcpy(custom, &(pAdapter->ScanTab.BssEntry[i].WpaIE.IE[0]),
-						   pAdapter->ScanTab.BssEntry[i].WpaIE.IELen);
-			iwe.cmd = IWEVGENIE;
-			iwe.u.data.length = pAdapter->ScanTab.BssEntry[i].WpaIE.IELen;
-			current_ev = IWE_STREAM_ADD_POINT(info, current_ev, end_buf, &iwe, custom);
-			if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-                return -E2BIG;
-#else
-			    break;
-#endif
-		}
-
-		//WPA2 IE
-        if (pAdapter->ScanTab.BssEntry[i].RsnIE.IELen > 0)
-        {
-        	memset(&iwe, 0, sizeof(iwe));
-			memset(&custom[0], 0, MAX_CUSTOM_LEN);
-			memcpy(custom, &(pAdapter->ScanTab.BssEntry[i].RsnIE.IE[0]),
-						   pAdapter->ScanTab.BssEntry[i].RsnIE.IELen);
-			iwe.cmd = IWEVGENIE;
-			iwe.u.data.length = pAdapter->ScanTab.BssEntry[i].RsnIE.IELen;
-			current_ev = IWE_STREAM_ADD_POINT(info, current_ev, end_buf, &iwe, custom);
-			if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-                return -E2BIG;
-#else
-			    break;
-#endif
-        }
-#else
-        //WPA IE
-		//================================
-        if (pAdapter->ScanTab.BssEntry[i].WpaIE.IELen > 0)
-        {
-    		NdisZeroMemory(&iwe, sizeof(iwe));
-			memset(&custom[0], 0, MAX_CUSTOM_LEN);
-    		iwe.cmd = IWEVCUSTOM;
-            iwe.u.data.length = (pAdapter->ScanTab.BssEntry[i].WpaIE.IELen * 2) + 7;
-            NdisMoveMemory(custom, "wpa_ie=", 7);
-            for (idx = 0; idx < pAdapter->ScanTab.BssEntry[i].WpaIE.IELen; idx++)
-                sprintf(custom, "%s%02x", custom, pAdapter->ScanTab.BssEntry[i].WpaIE.IE[idx]);
-            previous_ev = current_ev;
-    		current_ev = IWE_STREAM_ADD_POINT(info, current_ev, end_buf, &iwe,  custom);
-            if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-                return -E2BIG;
-#else
-			    break;
-#endif
-        }
-
-        //WPA2 IE
-        if (pAdapter->ScanTab.BssEntry[i].RsnIE.IELen > 0)
-        {
-    		NdisZeroMemory(&iwe, sizeof(iwe));
-			memset(&custom[0], 0, MAX_CUSTOM_LEN);
-    		iwe.cmd = IWEVCUSTOM;
-            iwe.u.data.length = (pAdapter->ScanTab.BssEntry[i].RsnIE.IELen * 2) + 7;
-            NdisMoveMemory(custom, "rsn_ie=", 7);
-			for (idx = 0; idx < pAdapter->ScanTab.BssEntry[i].RsnIE.IELen; idx++)
-                sprintf(custom, "%s%02x", custom, pAdapter->ScanTab.BssEntry[i].RsnIE.IE[idx]);
-            previous_ev = current_ev;
-    		current_ev = IWE_STREAM_ADD_POINT(info, current_ev, end_buf, &iwe,  custom);
-            if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-                return -E2BIG;
-#else
-			    break;
-#endif
-        }
-#endif // IWEVGENIE //
-	}
-
-	data->length = current_ev - extra;
-    pAdapter->StaCfg.bScanReqIsFromWebUI = FALSE;
-	DBGPRINT(RT_DEBUG_ERROR ,("===>rt_ioctl_giwscan. %d(%d) BSS returned, data->length = %d\n",i , pAdapter->ScanTab.BssNr, data->length));
-	return 0;
-}
-#endif
-
-int rt_ioctl_siwessid(struct net_device *dev,
-			 struct iw_request_info *info,
-			 struct iw_point *data, char *essid)
-{
-	PRTMP_ADAPTER pAdapter = (PRTMP_ADAPTER) dev->priv;
-
-	//check if the interface is down
-    if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-       	DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-       	return -ENETDOWN;
-    }
-
-	if (data->flags)
-	{
-		PCHAR	pSsidString = NULL;
-
-		// Includes null character.
-		if (data->length > (IW_ESSID_MAX_SIZE + 1))
-			return -E2BIG;
-
-		pSsidString = (CHAR *) kmalloc(MAX_LEN_OF_SSID+1, MEM_ALLOC_FLAG);
-		if (pSsidString)
-		{
-			NdisZeroMemory(pSsidString, MAX_LEN_OF_SSID+1);
-			NdisMoveMemory(pSsidString, essid, data->length);
-			if (Set_SSID_Proc(pAdapter, pSsidString) == FALSE)
-				return -EINVAL;
-		}
-		else
-			return -ENOMEM;
-	}
-	else
-	{
-		// ANY ssid
-		if (Set_SSID_Proc(pAdapter, "") == FALSE)
-			return -EINVAL;
-    }
-	return 0;
-}
-
-int rt_ioctl_giwessid(struct net_device *dev,
-			 struct iw_request_info *info,
-			 struct iw_point *data, char *essid)
-{
-	PRTMP_ADAPTER 	pAdapter = NULL;
-	VIRTUAL_ADAPTER *pVirtualAd = NULL;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->priv;
-	}
-	else
-	{
-		pVirtualAd = dev->priv;
-		if (pVirtualAd && pVirtualAd->RtmpDev)
-			pAdapter = pVirtualAd->RtmpDev->priv;
-	}
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-	data->flags = 1;
-    if (MONITOR_ON(pAdapter))
-    {
-        data->length  = 0;
-        return 0;
-    }
-
-	if (OPSTATUS_TEST_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED))
-	{
-		DBGPRINT(RT_DEBUG_TRACE ,("MediaState is connected\n"));
-		data->length = pAdapter->CommonCfg.SsidLen;
-		memcpy(essid, pAdapter->CommonCfg.Ssid, pAdapter->CommonCfg.SsidLen);
-	}
-#ifdef RT2870
-#ifdef WPA_SUPPLICANT_SUPPORT
-    // Add for RT2870
-    else if (pAdapter->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
-    {
-        data->length = pAdapter->CommonCfg.SsidLen;
-		memcpy(essid, pAdapter->CommonCfg.Ssid, pAdapter->CommonCfg.SsidLen);
-	}
-#endif // WPA_SUPPLICANT_SUPPORT //
-#endif // RT2870 //
-	else
-	{//the ANY ssid was specified
-		data->length  = 0;
-		DBGPRINT(RT_DEBUG_TRACE ,("MediaState is not connected, ess\n"));
-	}
-
-	return 0;
-
-}
-
-int rt_ioctl_siwnickn(struct net_device *dev,
-			 struct iw_request_info *info,
-			 struct iw_point *data, char *nickname)
-{
-	PRTMP_ADAPTER pAdapter = (PRTMP_ADAPTER) dev->priv;
-
-    //check if the interface is down
-    if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-        DBGPRINT(RT_DEBUG_TRACE ,("INFO::Network is down!\n"));
-        return -ENETDOWN;
-    }
-
-	if (data->length > IW_ESSID_MAX_SIZE)
-		return -EINVAL;
-
-	memset(pAdapter->nickname, 0, IW_ESSID_MAX_SIZE + 1);
-	memcpy(pAdapter->nickname, nickname, data->length);
-
-
-	return 0;
-}
-
-int rt_ioctl_giwnickn(struct net_device *dev,
-			 struct iw_request_info *info,
-			 struct iw_point *data, char *nickname)
-{
-	PRTMP_ADAPTER 	pAdapter = NULL;
-	VIRTUAL_ADAPTER *pVirtualAd = NULL;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->priv;
-	}
-	else
-	{
-		pVirtualAd = dev->priv;
-		if (pVirtualAd && pVirtualAd->RtmpDev)
-			pAdapter = pVirtualAd->RtmpDev->priv;
-	}
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-	if (data->length > strlen(pAdapter->nickname) + 1)
-		data->length = strlen(pAdapter->nickname) + 1;
-	if (data->length > 0) {
-		memcpy(nickname, pAdapter->nickname, data->length-1);
-		nickname[data->length-1] = '\0';
-	}
-	return 0;
-}
-
-int rt_ioctl_siwrts(struct net_device *dev,
-		       struct iw_request_info *info,
-		       struct iw_param *rts, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = (PRTMP_ADAPTER) dev->priv;
-	u16 val;
-
-    //check if the interface is down
-    if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-        return -ENETDOWN;
-    }
-
-	if (rts->disabled)
-		val = MAX_RTS_THRESHOLD;
-	else if (rts->value < 0 || rts->value > MAX_RTS_THRESHOLD)
-		return -EINVAL;
-	else if (rts->value == 0)
-	    val = MAX_RTS_THRESHOLD;
-	else
-		val = rts->value;
-
-	if (val != pAdapter->CommonCfg.RtsThreshold)
-		pAdapter->CommonCfg.RtsThreshold = val;
-
-	return 0;
-}
-
-int rt_ioctl_giwrts(struct net_device *dev,
-		       struct iw_request_info *info,
-		       struct iw_param *rts, char *extra)
-{
-	PRTMP_ADAPTER 	pAdapter = NULL;
-	VIRTUAL_ADAPTER *pVirtualAd = NULL;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->priv;
-	}
-	else
-	{
-		pVirtualAd = dev->priv;
-		if (pVirtualAd && pVirtualAd->RtmpDev)
-			pAdapter = pVirtualAd->RtmpDev->priv;
-	}
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-	//check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-  		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-    	return -ENETDOWN;
-	}
-
-	rts->value = pAdapter->CommonCfg.RtsThreshold;
-	rts->disabled = (rts->value == MAX_RTS_THRESHOLD);
-	rts->fixed = 1;
-
-	return 0;
-}
-
-int rt_ioctl_siwfrag(struct net_device *dev,
-			struct iw_request_info *info,
-			struct iw_param *frag, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = (PRTMP_ADAPTER) dev->priv;
-	u16 val;
-
-	//check if the interface is down
-    	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    	{
-      		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-        	return -ENETDOWN;
-    	}
-
-	if (frag->disabled)
-		val = MAX_FRAG_THRESHOLD;
-	else if (frag->value >= MIN_FRAG_THRESHOLD || frag->value <= MAX_FRAG_THRESHOLD)
-        val = __cpu_to_le16(frag->value & ~0x1); /* even numbers only */
-	else if (frag->value == 0)
-	    val = MAX_FRAG_THRESHOLD;
-	else
-		return -EINVAL;
-
-	pAdapter->CommonCfg.FragmentThreshold = val;
-	return 0;
-}
-
-int rt_ioctl_giwfrag(struct net_device *dev,
-			struct iw_request_info *info,
-			struct iw_param *frag, char *extra)
-{
-	PRTMP_ADAPTER 	pAdapter = NULL;
-	VIRTUAL_ADAPTER *pVirtualAd = NULL;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->priv;
-	}
-	else
-	{
-		pVirtualAd = dev->priv;
-		if (pVirtualAd && pVirtualAd->RtmpDev)
-			pAdapter = pVirtualAd->RtmpDev->priv;
-	}
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-	//check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-  		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-    	return -ENETDOWN;
-	}
-
-	frag->value = pAdapter->CommonCfg.FragmentThreshold;
-	frag->disabled = (frag->value == MAX_FRAG_THRESHOLD);
-	frag->fixed = 1;
-
-	return 0;
-}
-
-#define MAX_WEP_KEY_SIZE 13
-#define MIN_WEP_KEY_SIZE 5
-int rt_ioctl_siwencode(struct net_device *dev,
-			  struct iw_request_info *info,
-			  struct iw_point *erq, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = (PRTMP_ADAPTER) dev->priv;
-
-	//check if the interface is down
-    	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    	{
-      		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-        	return -ENETDOWN;
-    	}
-
-	if ((erq->length == 0) &&
-        (erq->flags & IW_ENCODE_DISABLED))
-	{
-		pAdapter->StaCfg.PairCipher = Ndis802_11WEPDisabled;
-		pAdapter->StaCfg.GroupCipher = Ndis802_11WEPDisabled;
-		pAdapter->StaCfg.WepStatus = Ndis802_11WEPDisabled;
-        pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
-        goto done;
-	}
-	else if ((erq->length == 0) &&
-             (erq->flags & IW_ENCODE_RESTRICTED || erq->flags & IW_ENCODE_OPEN))
-	{
-	    //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-		STA_PORT_SECURED(pAdapter);
-		pAdapter->StaCfg.PairCipher = Ndis802_11WEPEnabled;
-		pAdapter->StaCfg.GroupCipher = Ndis802_11WEPEnabled;
-		pAdapter->StaCfg.WepStatus = Ndis802_11WEPEnabled;
-        pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-		if (erq->flags & IW_ENCODE_RESTRICTED)
-			pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeShared;
-    	else
-			pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
-        goto done;
-	}
-
-    if (erq->length > 0)
-	{
-		int keyIdx = (erq->flags & IW_ENCODE_INDEX) - 1;
-		/* Check the size of the key */
-		if (erq->length > MAX_WEP_KEY_SIZE) {
-			return -EINVAL;
-		}
-		/* Check key index */
-		if ((keyIdx < 0) || (keyIdx >= NR_WEP_KEYS))
-        {
-            DBGPRINT(RT_DEBUG_TRACE ,("==>rt_ioctl_siwencode::Wrong keyIdx=%d! Using default key instead (%d)\n",
-                                        keyIdx, pAdapter->StaCfg.DefaultKeyId));
-
-            //Using default key
-			keyIdx = pAdapter->StaCfg.DefaultKeyId;
-        }
-
-        NdisZeroMemory(pAdapter->SharedKey[BSS0][keyIdx].Key,  16);
-
-		if (erq->length == MAX_WEP_KEY_SIZE)
-        {
-			pAdapter->SharedKey[BSS0][keyIdx].KeyLen = MAX_WEP_KEY_SIZE;
-            pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CIPHER_WEP128;
-		}
-		else if (erq->length == MIN_WEP_KEY_SIZE)
-        {
-            pAdapter->SharedKey[BSS0][keyIdx].KeyLen = MIN_WEP_KEY_SIZE;
-            pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CIPHER_WEP64;
-		}
-		else
-			/* Disable the key */
-			pAdapter->SharedKey[BSS0][keyIdx].KeyLen = 0;
-
-		/* Check if the key is not marked as invalid */
-		if(!(erq->flags & IW_ENCODE_NOKEY)) {
-			/* Copy the key in the driver */
-			NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, extra, erq->length);
-        }
-	}
-    else
-			{
-		/* Do we want to just set the transmit key index ? */
-		int index = (erq->flags & IW_ENCODE_INDEX) - 1;
-		if ((index >= 0) && (index < 4))
-        {
-			pAdapter->StaCfg.DefaultKeyId = index;
-            }
-        else
-			/* Don't complain if only change the mode */
-			if(!erq->flags & IW_ENCODE_MODE) {
-				return -EINVAL;
-		}
-	}
-
-done:
-    DBGPRINT(RT_DEBUG_TRACE ,("==>rt_ioctl_siwencode::erq->flags=%x\n",erq->flags));
-	DBGPRINT(RT_DEBUG_TRACE ,("==>rt_ioctl_siwencode::AuthMode=%x\n",pAdapter->StaCfg.AuthMode));
-	DBGPRINT(RT_DEBUG_TRACE ,("==>rt_ioctl_siwencode::DefaultKeyId=%x, KeyLen = %d\n",pAdapter->StaCfg.DefaultKeyId , pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen));
-	DBGPRINT(RT_DEBUG_TRACE ,("==>rt_ioctl_siwencode::WepStatus=%x\n",pAdapter->StaCfg.WepStatus));
-	return 0;
-}
-
-int
-rt_ioctl_giwencode(struct net_device *dev,
-			  struct iw_request_info *info,
-			  struct iw_point *erq, char *key)
-{
-	int kid;
-	PRTMP_ADAPTER 	pAdapter = NULL;
-	VIRTUAL_ADAPTER *pVirtualAd = NULL;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->priv;
-	}
-	else
-	{
-		pVirtualAd = dev->priv;
-		if (pVirtualAd && pVirtualAd->RtmpDev)
-			pAdapter = pVirtualAd->RtmpDev->priv;
-	}
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-	//check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-  		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-    	return -ENETDOWN;
-	}
-
-	kid = erq->flags & IW_ENCODE_INDEX;
-	DBGPRINT(RT_DEBUG_TRACE, ("===>rt_ioctl_giwencode %d\n", erq->flags & IW_ENCODE_INDEX));
-
-	if (pAdapter->StaCfg.WepStatus == Ndis802_11WEPDisabled)
-	{
-		erq->length = 0;
-		erq->flags = IW_ENCODE_DISABLED;
-	}
-	else if ((kid > 0) && (kid <=4))
-	{
-		// copy wep key
-		erq->flags = kid ;			/* NB: base 1 */
-		if (erq->length > pAdapter->SharedKey[BSS0][kid-1].KeyLen)
-			erq->length = pAdapter->SharedKey[BSS0][kid-1].KeyLen;
-		memcpy(key, pAdapter->SharedKey[BSS0][kid-1].Key, erq->length);
-		//if ((kid == pAdapter->PortCfg.DefaultKeyId))
-		//erq->flags |= IW_ENCODE_ENABLED;	/* XXX */
-		if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeShared)
-			erq->flags |= IW_ENCODE_RESTRICTED;		/* XXX */
-		else
-			erq->flags |= IW_ENCODE_OPEN;		/* XXX */
-
-	}
-	else if (kid == 0)
-	{
-		if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeShared)
-			erq->flags |= IW_ENCODE_RESTRICTED;		/* XXX */
-		else
-			erq->flags |= IW_ENCODE_OPEN;		/* XXX */
-		erq->length = pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen;
-		memcpy(key, pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].Key, erq->length);
-		// copy default key ID
-		if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeShared)
-			erq->flags |= IW_ENCODE_RESTRICTED;		/* XXX */
-		else
-			erq->flags |= IW_ENCODE_OPEN;		/* XXX */
-		erq->flags = pAdapter->StaCfg.DefaultKeyId + 1;			/* NB: base 1 */
-		erq->flags |= IW_ENCODE_ENABLED;	/* XXX */
-	}
-
-	return 0;
-
-}
-
-static int
-rt_ioctl_setparam(struct net_device *dev, struct iw_request_info *info,
-			 void *w, char *extra)
-{
-    VIRTUAL_ADAPTER	*pVirtualAd = NULL;
-	PRTMP_ADAPTER pAdapter;
-	POS_COOKIE pObj;
-	char *this_char = extra;
-	char *value;
-	int  Status=0;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->priv;
-	}
-	else
-	{
-		pVirtualAd = dev->priv;
-		pAdapter = pVirtualAd->RtmpDev->priv;
-	}
-	pObj = (POS_COOKIE) pAdapter->OS_Cookie;
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-	{
-		pObj->ioctl_if_type = INT_MAIN;
-        pObj->ioctl_if = MAIN_MBSSID;
-	}
-
-	//check if the interface is down
-    	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    	{
-      		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-			return -ENETDOWN;
-    	}
-
-	if (!*this_char)
-		return -EINVAL;
-
-	if ((value = rtstrchr(this_char, '=')) != NULL)
-	    *value++ = 0;
-
-	if (!value)
-	    return -EINVAL;
-
-	// reject setting nothing besides ANY ssid(ssidLen=0)
-    if (!*value && (strcmp(this_char, "SSID") != 0))
-        return -EINVAL;
-
-	for (PRTMP_PRIVATE_SET_PROC = RTMP_PRIVATE_SUPPORT_PROC; PRTMP_PRIVATE_SET_PROC->name; PRTMP_PRIVATE_SET_PROC++)
-	{
-	    if (strcmp(this_char, PRTMP_PRIVATE_SET_PROC->name) == 0)
-	    {
-	        if(!PRTMP_PRIVATE_SET_PROC->set_proc(pAdapter, value))
-	        {	//FALSE:Set private failed then return Invalid argument
-			    Status = -EINVAL;
-	        }
-		    break;	//Exit for loop.
-	    }
-	}
-
-	if(PRTMP_PRIVATE_SET_PROC->name == NULL)
-	{  //Not found argument
-	    Status = -EINVAL;
-	    DBGPRINT(RT_DEBUG_TRACE, ("===>rt_ioctl_setparam:: (iwpriv) Not Support Set Command [%s=%s]\n", this_char, value));
-	}
-
-    return Status;
-}
-
-
-static int
-rt_private_get_statistics(struct net_device *dev, struct iw_request_info *info,
-		struct iw_point *wrq, char *extra)
-{
-	INT				Status = 0;
-    PRTMP_ADAPTER   pAd = (PRTMP_ADAPTER) dev->priv;
-
-    if (extra == NULL)
-    {
-        wrq->length = 0;
-        return -EIO;
-    }
-
-    memset(extra, 0x00, IW_PRIV_SIZE_MASK);
-    sprintf(extra, "\n\n");
-
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-	{
-	    sprintf(extra+strlen(extra), "Tx success                      = %ld\n", (ULONG)pAd->ate.TxDoneCount);
-	    //sprintf(extra+strlen(extra), "Tx success without retry        = %ld\n", (ULONG)pAd->ate.TxDoneCount);
-	}
-	else
-#endif // RALINK_ATE //
-	{
-    sprintf(extra+strlen(extra), "Tx success                      = %ld\n", (ULONG)pAd->WlanCounters.TransmittedFragmentCount.QuadPart);
-    sprintf(extra+strlen(extra), "Tx success without retry        = %ld\n", (ULONG)pAd->WlanCounters.TransmittedFragmentCount.QuadPart - (ULONG)pAd->WlanCounters.RetryCount.QuadPart);
-	}
-    sprintf(extra+strlen(extra), "Tx success after retry          = %ld\n", (ULONG)pAd->WlanCounters.RetryCount.QuadPart);
-    sprintf(extra+strlen(extra), "Tx fail to Rcv ACK after retry  = %ld\n", (ULONG)pAd->WlanCounters.FailedCount.QuadPart);
-    sprintf(extra+strlen(extra), "RTS Success Rcv CTS             = %ld\n", (ULONG)pAd->WlanCounters.RTSSuccessCount.QuadPart);
-    sprintf(extra+strlen(extra), "RTS Fail Rcv CTS                = %ld\n", (ULONG)pAd->WlanCounters.RTSFailureCount.QuadPart);
-
-    sprintf(extra+strlen(extra), "Rx success                      = %ld\n", (ULONG)pAd->WlanCounters.ReceivedFragmentCount.QuadPart);
-    sprintf(extra+strlen(extra), "Rx with CRC                     = %ld\n", (ULONG)pAd->WlanCounters.FCSErrorCount.QuadPart);
-    sprintf(extra+strlen(extra), "Rx drop due to out of resource  = %ld\n", (ULONG)pAd->Counters8023.RxNoBuffer);
-    sprintf(extra+strlen(extra), "Rx duplicate frame              = %ld\n", (ULONG)pAd->WlanCounters.FrameDuplicateCount.QuadPart);
-
-    sprintf(extra+strlen(extra), "False CCA (one second)          = %ld\n", (ULONG)pAd->RalinkCounters.OneSecFalseCCACnt);
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-	{
-		if (pAd->ate.RxAntennaSel == 0)
-		{
-    		sprintf(extra+strlen(extra), "RSSI-A                          = %ld\n", (LONG)(pAd->ate.LastRssi0 - pAd->BbpRssiToDbmDelta));
-			sprintf(extra+strlen(extra), "RSSI-B (if available)           = %ld\n", (LONG)(pAd->ate.LastRssi1 - pAd->BbpRssiToDbmDelta));
-			sprintf(extra+strlen(extra), "RSSI-C (if available)           = %ld\n\n", (LONG)(pAd->ate.LastRssi2 - pAd->BbpRssiToDbmDelta));
-		}
-		else
-		{
-    		sprintf(extra+strlen(extra), "RSSI                            = %ld\n", (LONG)(pAd->ate.LastRssi0 - pAd->BbpRssiToDbmDelta));
-		}
-	}
-	else
-#endif // RALINK_ATE //
-	{
-    	sprintf(extra+strlen(extra), "RSSI-A                          = %ld\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi0 - pAd->BbpRssiToDbmDelta));
-        sprintf(extra+strlen(extra), "RSSI-B (if available)           = %ld\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi1 - pAd->BbpRssiToDbmDelta));
-        sprintf(extra+strlen(extra), "RSSI-C (if available)           = %ld\n\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi2 - pAd->BbpRssiToDbmDelta));
-	}
-#ifdef WPA_SUPPLICANT_SUPPORT
-    sprintf(extra+strlen(extra), "WpaSupplicantUP                 = %d\n\n", pAd->StaCfg.WpaSupplicantUP);
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-
-    wrq->length = strlen(extra) + 1; // 1: size of '\0'
-    DBGPRINT(RT_DEBUG_TRACE, ("<== rt_private_get_statistics, wrq->length = %d\n", wrq->length));
-
-    return Status;
-}
-
-#ifdef DOT11_N_SUPPORT
-void	getBaInfo(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pOutBuf)
-{
-	INT i, j;
-	BA_ORI_ENTRY *pOriBAEntry;
-	BA_REC_ENTRY *pRecBAEntry;
-
-	for (i=0; i<MAX_LEN_OF_MAC_TABLE; i++)
-	{
-		PMAC_TABLE_ENTRY pEntry = &pAd->MacTab.Content[i];
-		if (((pEntry->ValidAsCLI || pEntry->ValidAsApCli) && (pEntry->Sst == SST_ASSOC))
-			|| (pEntry->ValidAsWDS) || (pEntry->ValidAsMesh))
-		{
-			sprintf(pOutBuf, "%s\n%02X:%02X:%02X:%02X:%02X:%02X (Aid = %d) (AP) -\n",
-                pOutBuf,
-				pEntry->Addr[0], pEntry->Addr[1], pEntry->Addr[2],
-				pEntry->Addr[3], pEntry->Addr[4], pEntry->Addr[5], pEntry->Aid);
-
-			sprintf(pOutBuf, "%s[Recipient]\n", pOutBuf);
-			for (j=0; j < NUM_OF_TID; j++)
-			{
-				if (pEntry->BARecWcidArray[j] != 0)
-				{
-					pRecBAEntry =&pAd->BATable.BARecEntry[pEntry->BARecWcidArray[j]];
-					sprintf(pOutBuf, "%sTID=%d, BAWinSize=%d, LastIndSeq=%d, ReorderingPkts=%d\n", pOutBuf, j, pRecBAEntry->BAWinSize, pRecBAEntry->LastIndSeq, pRecBAEntry->list.qlen);
-				}
-			}
-			sprintf(pOutBuf, "%s\n", pOutBuf);
-
-			sprintf(pOutBuf, "%s[Originator]\n", pOutBuf);
-			for (j=0; j < NUM_OF_TID; j++)
-			{
-				if (pEntry->BAOriWcidArray[j] != 0)
-				{
-					pOriBAEntry =&pAd->BATable.BAOriEntry[pEntry->BAOriWcidArray[j]];
-					sprintf(pOutBuf, "%sTID=%d, BAWinSize=%d, StartSeq=%d, CurTxSeq=%d\n", pOutBuf, j, pOriBAEntry->BAWinSize, pOriBAEntry->Sequence, pEntry->TxSeq[j]);
-				}
-			}
-			sprintf(pOutBuf, "%s\n\n", pOutBuf);
-		}
-        if (strlen(pOutBuf) > (IW_PRIV_SIZE_MASK - 30))
-                break;
-	}
-
-	return;
-}
-#endif // DOT11_N_SUPPORT //
-
-static int
-rt_private_show(struct net_device *dev, struct iw_request_info *info,
-		struct iw_point *wrq, char *extra)
-{
-    INT				Status = 0;
-    VIRTUAL_ADAPTER	*pVirtualAd = NULL;
-    PRTMP_ADAPTER   pAd;
-	POS_COOKIE		pObj;
-    u32             subcmd = wrq->flags;
-
-	if (dev->priv_flags == INT_MAIN)
-		pAd = dev->priv;
-	else
-	{
-		pVirtualAd = dev->priv;
-		pAd = pVirtualAd->RtmpDev->priv;
-	}
-	pObj = (POS_COOKIE) pAd->OS_Cookie;
-
-	if (pAd == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-    if (extra == NULL)
-    {
-        wrq->length = 0;
-        return -EIO;
-    }
-    memset(extra, 0x00, IW_PRIV_SIZE_MASK);
-
-	{
-		pObj->ioctl_if_type = INT_MAIN;
-        pObj->ioctl_if = MAIN_MBSSID;
-	}
-
-    switch(subcmd)
-    {
-
-        case SHOW_CONN_STATUS:
-            if (MONITOR_ON(pAd))
-            {
-#ifdef DOT11_N_SUPPORT
-                if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED &&
-                    pAd->CommonCfg.RegTransmitSetting.field.BW)
-                    sprintf(extra, "Monitor Mode(CentralChannel %d)\n", pAd->CommonCfg.CentralChannel);
-                else
-#endif // DOT11_N_SUPPORT //
-                    sprintf(extra, "Monitor Mode(Channel %d)\n", pAd->CommonCfg.Channel);
-            }
-            else
-            {
-                if (pAd->IndicateMediaState == NdisMediaStateConnected)
-            	{
-            	    if (INFRA_ON(pAd))
-                    {
-                    sprintf(extra, "Connected(AP: %s[%02X:%02X:%02X:%02X:%02X:%02X])\n",
-                                    pAd->CommonCfg.Ssid,
-                                    pAd->CommonCfg.Bssid[0],
-                                    pAd->CommonCfg.Bssid[1],
-                                    pAd->CommonCfg.Bssid[2],
-                                    pAd->CommonCfg.Bssid[3],
-                                    pAd->CommonCfg.Bssid[4],
-                                    pAd->CommonCfg.Bssid[5]);
-            		DBGPRINT(RT_DEBUG_TRACE ,("Ssid=%s ,Ssidlen = %d\n",pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen));
-            	}
-                    else if (ADHOC_ON(pAd))
-                        sprintf(extra, "Connected\n");
-            	}
-            	else
-            	{
-            	    sprintf(extra, "Disconnected\n");
-            		DBGPRINT(RT_DEBUG_TRACE ,("ConnStatus is not connected\n"));
-            	}
-            }
-            wrq->length = strlen(extra) + 1; // 1: size of '\0'
-            break;
-        case SHOW_DRVIER_VERION:
-            sprintf(extra, "Driver version-%s, %s %s\n", STA_DRIVER_VERSION, __DATE__, __TIME__ );
-            wrq->length = strlen(extra) + 1; // 1: size of '\0'
-            break;
-#ifdef DOT11_N_SUPPORT
-        case SHOW_BA_INFO:
-            getBaInfo(pAd, extra);
-            wrq->length = strlen(extra) + 1; // 1: size of '\0'
-            break;
-#endif // DOT11_N_SUPPORT //
-		case SHOW_DESC_INFO:
-			{
-				Show_DescInfo_Proc(pAd, NULL);
-				wrq->length = 0; // 1: size of '\0'
-			}
-			break;
-        case RAIO_OFF:
-            if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-            {
-                sprintf(extra, "Scanning\n");
-                wrq->length = strlen(extra) + 1; // 1: size of '\0'
-                break;
-            }
-            pAd->StaCfg.bSwRadio = FALSE;
-            if (pAd->StaCfg.bRadio != (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio))
-            {
-                pAd->StaCfg.bRadio = (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio);
-                if (pAd->StaCfg.bRadio == FALSE)
-                {
-                    MlmeRadioOff(pAd);
-                    // Update extra information
-					pAd->ExtraInfo = SW_RADIO_OFF;
-                }
-            }
-            sprintf(extra, "Radio Off\n");
-            wrq->length = strlen(extra) + 1; // 1: size of '\0'
-            break;
-        case RAIO_ON:
-            if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-            {
-                sprintf(extra, "Scanning\n");
-                wrq->length = strlen(extra) + 1; // 1: size of '\0'
-                break;
-            }
-            pAd->StaCfg.bSwRadio = TRUE;
-            //if (pAd->StaCfg.bRadio != (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio))
-            {
-                pAd->StaCfg.bRadio = (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio);
-                if (pAd->StaCfg.bRadio == TRUE)
-                {
-                    MlmeRadioOn(pAd);
-                    // Update extra information
-					pAd->ExtraInfo = EXTRA_INFO_CLEAR;
-                }
-            }
-            sprintf(extra, "Radio On\n");
-            wrq->length = strlen(extra) + 1; // 1: size of '\0'
-            break;
-
-
-#ifdef QOS_DLS_SUPPORT
-		case SHOW_DLS_ENTRY_INFO:
-			{
-				Set_DlsEntryInfo_Display_Proc(pAd, NULL);
-				wrq->length = 0; // 1: size of '\0'
-			}
-			break;
-#endif // QOS_DLS_SUPPORT //
-
-		case SHOW_CFG_VALUE:
-			{
-				Status = RTMPShowCfgValue(pAd, wrq->pointer, extra);
-				if (Status == 0)
-					wrq->length = strlen(extra) + 1; // 1: size of '\0'
-			}
-			break;
-		case SHOW_ADHOC_ENTRY_INFO:
-			Show_Adhoc_MacTable_Proc(pAd, extra);
-			wrq->length = strlen(extra) + 1; // 1: size of '\0'
-			break;
-        default:
-            DBGPRINT(RT_DEBUG_TRACE, ("%s - unknow subcmd = %d\n", __func__, subcmd));
-            break;
-    }
-
-    return Status;
-}
-
-#ifdef SIOCSIWMLME
-int rt_ioctl_siwmlme(struct net_device *dev,
-			   struct iw_request_info *info,
-			   union iwreq_data *wrqu,
-			   char *extra)
-{
-	PRTMP_ADAPTER   pAd = (PRTMP_ADAPTER) dev->priv;
-	struct iw_mlme *pMlme = (struct iw_mlme *)wrqu->data.pointer;
-	MLME_QUEUE_ELEM				MsgElem;
-	MLME_DISASSOC_REQ_STRUCT	DisAssocReq;
-	MLME_DEAUTH_REQ_STRUCT      DeAuthReq;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("====> %s\n", __func__));
-
-	if (pMlme == NULL)
-		return -EINVAL;
-
-	switch(pMlme->cmd)
-	{
-#ifdef IW_MLME_DEAUTH
-		case IW_MLME_DEAUTH:
-			DBGPRINT(RT_DEBUG_TRACE, ("====> %s - IW_MLME_DEAUTH\n", __func__));
-			COPY_MAC_ADDR(DeAuthReq.Addr, pAd->CommonCfg.Bssid);
-			DeAuthReq.Reason = pMlme->reason_code;
-			MsgElem.MsgLen = sizeof(MLME_DEAUTH_REQ_STRUCT);
-			NdisMoveMemory(MsgElem.Msg, &DeAuthReq, sizeof(MLME_DEAUTH_REQ_STRUCT));
-			MlmeDeauthReqAction(pAd, &MsgElem);
-			if (INFRA_ON(pAd))
-			{
-			    LinkDown(pAd, FALSE);
-			    pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-			}
-			break;
-#endif // IW_MLME_DEAUTH //
-#ifdef IW_MLME_DISASSOC
-		case IW_MLME_DISASSOC:
-			DBGPRINT(RT_DEBUG_TRACE, ("====> %s - IW_MLME_DISASSOC\n", __func__));
-			COPY_MAC_ADDR(DisAssocReq.Addr, pAd->CommonCfg.Bssid);
-			DisAssocReq.Reason =  pMlme->reason_code;
-
-			MsgElem.Machine = ASSOC_STATE_MACHINE;
-			MsgElem.MsgType = MT2_MLME_DISASSOC_REQ;
-			MsgElem.MsgLen = sizeof(MLME_DISASSOC_REQ_STRUCT);
-			NdisMoveMemory(MsgElem.Msg, &DisAssocReq, sizeof(MLME_DISASSOC_REQ_STRUCT));
-
-			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
-			MlmeDisassocReqAction(pAd, &MsgElem);
-			break;
-#endif // IW_MLME_DISASSOC //
-		default:
-			DBGPRINT(RT_DEBUG_TRACE, ("====> %s - Unknow Command\n", __func__));
-			break;
-	}
-
-	return 0;
-}
-#endif // SIOCSIWMLME //
-
-#if WIRELESS_EXT > 17
-int rt_ioctl_siwauth(struct net_device *dev,
-			  struct iw_request_info *info,
-			  union iwreq_data *wrqu, char *extra)
-{
-	PRTMP_ADAPTER   pAdapter = (PRTMP_ADAPTER) dev->priv;
-	struct iw_param *param = &wrqu->param;
-
-    //check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-  		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-    	return -ENETDOWN;
-	}
-	switch (param->flags & IW_AUTH_INDEX) {
-    	case IW_AUTH_WPA_VERSION:
-            if (param->value == IW_AUTH_WPA_VERSION_WPA)
-            {
-                pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPAPSK;
-				if (pAdapter->StaCfg.BssType == BSS_ADHOC)
-					pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPANone;
-            }
-            else if (param->value == IW_AUTH_WPA_VERSION_WPA2)
-                pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2PSK;
-
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_WPA_VERSION - param->value = %d!\n", __func__, param->value));
-            break;
-    	case IW_AUTH_CIPHER_PAIRWISE:
-            if (param->value == IW_AUTH_CIPHER_NONE)
-            {
-                pAdapter->StaCfg.WepStatus = Ndis802_11WEPDisabled;
-                pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-                pAdapter->StaCfg.PairCipher = Ndis802_11WEPDisabled;
-            }
-            else if (param->value == IW_AUTH_CIPHER_WEP40 ||
-                     param->value == IW_AUTH_CIPHER_WEP104)
-            {
-                pAdapter->StaCfg.WepStatus = Ndis802_11WEPEnabled;
-                pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-                pAdapter->StaCfg.PairCipher = Ndis802_11WEPEnabled;
-#ifdef WPA_SUPPLICANT_SUPPORT
-                pAdapter->StaCfg.IEEE8021X = FALSE;
-#endif // WPA_SUPPLICANT_SUPPORT //
-            }
-            else if (param->value == IW_AUTH_CIPHER_TKIP)
-            {
-                pAdapter->StaCfg.WepStatus = Ndis802_11Encryption2Enabled;
-                pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-                pAdapter->StaCfg.PairCipher = Ndis802_11Encryption2Enabled;
-            }
-            else if (param->value == IW_AUTH_CIPHER_CCMP)
-            {
-                pAdapter->StaCfg.WepStatus = Ndis802_11Encryption3Enabled;
-                pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-                pAdapter->StaCfg.PairCipher = Ndis802_11Encryption3Enabled;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_CIPHER_PAIRWISE - param->value = %d!\n", __func__, param->value));
-            break;
-    	case IW_AUTH_CIPHER_GROUP:
-            if (param->value == IW_AUTH_CIPHER_NONE)
-            {
-                pAdapter->StaCfg.GroupCipher = Ndis802_11WEPDisabled;
-            }
-            else if (param->value == IW_AUTH_CIPHER_WEP40 ||
-                     param->value == IW_AUTH_CIPHER_WEP104)
-            {
-                pAdapter->StaCfg.GroupCipher = Ndis802_11WEPEnabled;
-            }
-            else if (param->value == IW_AUTH_CIPHER_TKIP)
-            {
-                pAdapter->StaCfg.GroupCipher = Ndis802_11Encryption2Enabled;
-            }
-            else if (param->value == IW_AUTH_CIPHER_CCMP)
-            {
-                pAdapter->StaCfg.GroupCipher = Ndis802_11Encryption3Enabled;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_CIPHER_GROUP - param->value = %d!\n", __func__, param->value));
-            break;
-    	case IW_AUTH_KEY_MGMT:
-            if (param->value == IW_AUTH_KEY_MGMT_802_1X)
-            {
-                if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK)
-                {
-                    pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA;
-#ifdef WPA_SUPPLICANT_SUPPORT
-                    pAdapter->StaCfg.IEEE8021X = FALSE;
-#endif // WPA_SUPPLICANT_SUPPORT //
-                }
-                else if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)
-                {
-                    pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2;
-#ifdef WPA_SUPPLICANT_SUPPORT
-                    pAdapter->StaCfg.IEEE8021X = FALSE;
-#endif // WPA_SUPPLICANT_SUPPORT //
-                }
-#ifdef WPA_SUPPLICANT_SUPPORT
-                else
-                    // WEP 1x
-                    pAdapter->StaCfg.IEEE8021X = TRUE;
-#endif // WPA_SUPPLICANT_SUPPORT //
-            }
-            else if (param->value == 0)
-            {
-                //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-				STA_PORT_SECURED(pAdapter);
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_KEY_MGMT - param->value = %d!\n", __func__, param->value));
-            break;
-    	case IW_AUTH_RX_UNENCRYPTED_EAPOL:
-            break;
-    	case IW_AUTH_PRIVACY_INVOKED:
-            /*if (param->value == 0)
-			{
-                pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
-                pAdapter->StaCfg.WepStatus = Ndis802_11WEPDisabled;
-                pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-                pAdapter->StaCfg.PairCipher = Ndis802_11WEPDisabled;
-        	    pAdapter->StaCfg.GroupCipher = Ndis802_11WEPDisabled;
-            }*/
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_PRIVACY_INVOKED - param->value = %d!\n", __func__, param->value));
-    		break;
-    	case IW_AUTH_DROP_UNENCRYPTED:
-            if (param->value != 0)
-                pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-			else
-			{
-                //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-				STA_PORT_SECURED(pAdapter);
-			}
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_WPA_VERSION - param->value = %d!\n", __func__, param->value));
-    		break;
-    	case IW_AUTH_80211_AUTH_ALG:
-			if (param->value & IW_AUTH_ALG_SHARED_KEY)
-            {
-				pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeShared;
-			}
-            else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM)
-            {
-				pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
-			}
-            else
-				return -EINVAL;
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_80211_AUTH_ALG - param->value = %d!\n", __func__, param->value));
-			break;
-    	case IW_AUTH_WPA_ENABLED:
-    		DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_WPA_ENABLED - Driver supports WPA!(param->value = %d)\n", __func__, param->value));
-    		break;
-    	default:
-    		return -EOPNOTSUPP;
-}
-
-	return 0;
-}
-
-int rt_ioctl_giwauth(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-	PRTMP_ADAPTER   pAdapter = (PRTMP_ADAPTER) dev->priv;
-	struct iw_param *param = &wrqu->param;
-
-    //check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-  		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-    	return -ENETDOWN;
-    }
-
-	switch (param->flags & IW_AUTH_INDEX) {
-	case IW_AUTH_DROP_UNENCRYPTED:
-        param->value = (pAdapter->StaCfg.WepStatus == Ndis802_11WEPDisabled) ? 0 : 1;
-		break;
-
-	case IW_AUTH_80211_AUTH_ALG:
-        param->value = (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeShared) ? IW_AUTH_ALG_SHARED_KEY : IW_AUTH_ALG_OPEN_SYSTEM;
-		break;
-
-	case IW_AUTH_WPA_ENABLED:
-		param->value = (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA) ? 1 : 0;
-		break;
-
-	default:
-		return -EOPNOTSUPP;
-	}
-    DBGPRINT(RT_DEBUG_TRACE, ("rt_ioctl_giwauth::param->value = %d!\n", param->value));
-	return 0;
-}
-
-void fnSetCipherKey(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  INT             keyIdx,
-    IN  UCHAR           CipherAlg,
-    IN  BOOLEAN         bGTK,
-    IN  struct iw_encode_ext *ext)
-{
-    NdisZeroMemory(&pAdapter->SharedKey[BSS0][keyIdx], sizeof(CIPHER_KEY));
-    pAdapter->SharedKey[BSS0][keyIdx].KeyLen = LEN_TKIP_EK;
-    NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, ext->key, LEN_TKIP_EK);
-    NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].TxMic, ext->key + LEN_TKIP_EK, LEN_TKIP_TXMICK);
-    NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].RxMic, ext->key + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK);
-    pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CipherAlg;
-
-    // Update group key information to ASIC Shared Key Table
-	AsicAddSharedKeyEntry(pAdapter,
-						  BSS0,
-						  keyIdx,
-						  pAdapter->SharedKey[BSS0][keyIdx].CipherAlg,
-						  pAdapter->SharedKey[BSS0][keyIdx].Key,
-						  pAdapter->SharedKey[BSS0][keyIdx].TxMic,
-						  pAdapter->SharedKey[BSS0][keyIdx].RxMic);
-
-    if (bGTK)
-        // Update ASIC WCID attribute table and IVEIV table
-    	RTMPAddWcidAttributeEntry(pAdapter,
-    							  BSS0,
-    							  keyIdx,
-    							  pAdapter->SharedKey[BSS0][keyIdx].CipherAlg,
-    							  NULL);
-    else
-        // Update ASIC WCID attribute table and IVEIV table
-    	RTMPAddWcidAttributeEntry(pAdapter,
-    							  BSS0,
-    							  keyIdx,
-    							  pAdapter->SharedKey[BSS0][keyIdx].CipherAlg,
-    							  &pAdapter->MacTab.Content[BSSID_WCID]);
-}
-
-int rt_ioctl_siwencodeext(struct net_device *dev,
-			   struct iw_request_info *info,
-			   union iwreq_data *wrqu,
-			   char *extra)
-			{
-    PRTMP_ADAPTER   pAdapter = (PRTMP_ADAPTER) dev->priv;
-	struct iw_point *encoding = &wrqu->encoding;
-	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
-    int keyIdx, alg = ext->alg;
-
-    //check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-  		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-    	return -ENETDOWN;
-	}
-
-    if (encoding->flags & IW_ENCODE_DISABLED)
-	{
-        keyIdx = (encoding->flags & IW_ENCODE_INDEX) - 1;
-        // set BSSID wcid entry of the Pair-wise Key table as no-security mode
-	    AsicRemovePairwiseKeyEntry(pAdapter, BSS0, BSSID_WCID);
-        pAdapter->SharedKey[BSS0][keyIdx].KeyLen = 0;
-		pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CIPHER_NONE;
-		AsicRemoveSharedKeyEntry(pAdapter, 0, (UCHAR)keyIdx);
-        NdisZeroMemory(&pAdapter->SharedKey[BSS0][keyIdx], sizeof(CIPHER_KEY));
-        DBGPRINT(RT_DEBUG_TRACE, ("%s::Remove all keys!(encoding->flags = %x)\n", __func__, encoding->flags));
-    }
-					else
-    {
-        // Get Key Index and convet to our own defined key index
-    	keyIdx = (encoding->flags & IW_ENCODE_INDEX) - 1;
-    	if((keyIdx < 0) || (keyIdx >= NR_WEP_KEYS))
-    		return -EINVAL;
-
-        if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)
-        {
-            pAdapter->StaCfg.DefaultKeyId = keyIdx;
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::DefaultKeyId = %d\n", __func__, pAdapter->StaCfg.DefaultKeyId));
-        }
-
-        switch (alg) {
-    		case IW_ENCODE_ALG_NONE:
-                DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_ENCODE_ALG_NONE\n", __func__));
-    			break;
-    		case IW_ENCODE_ALG_WEP:
-                DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_ENCODE_ALG_WEP - ext->key_len = %d, keyIdx = %d\n", __func__, ext->key_len, keyIdx));
-    			if (ext->key_len == MAX_WEP_KEY_SIZE)
-                {
-        			pAdapter->SharedKey[BSS0][keyIdx].KeyLen = MAX_WEP_KEY_SIZE;
-                    pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CIPHER_WEP128;
-				}
-        		else if (ext->key_len == MIN_WEP_KEY_SIZE)
-                {
-                    pAdapter->SharedKey[BSS0][keyIdx].KeyLen = MIN_WEP_KEY_SIZE;
-                    pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CIPHER_WEP64;
-			}
-        		else
-                    return -EINVAL;
-
-                NdisZeroMemory(pAdapter->SharedKey[BSS0][keyIdx].Key,  16);
-			    NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, ext->key, ext->key_len);
-    			break;
-            case IW_ENCODE_ALG_TKIP:
-                DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_ENCODE_ALG_TKIP - keyIdx = %d, ext->key_len = %d\n", __func__, keyIdx, ext->key_len));
-                if (ext->key_len == 32)
-                {
-                    if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)
-                    {
-                        fnSetCipherKey(pAdapter, keyIdx, CIPHER_TKIP, FALSE, ext);
-                        if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA2)
-                        {
-                            //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-                            STA_PORT_SECURED(pAdapter);
-                        }
-		}
-                    else if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY)
-                    {
-                        fnSetCipherKey(pAdapter, keyIdx, CIPHER_TKIP, TRUE, ext);
-
-                        // set 802.1x port control
-            	        //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-            	        STA_PORT_SECURED(pAdapter);
-                    }
-                }
-                else
-                    return -EINVAL;
-                break;
-            case IW_ENCODE_ALG_CCMP:
-                if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)
-		{
-                    fnSetCipherKey(pAdapter, keyIdx, CIPHER_AES, FALSE, ext);
-                    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA2)
-                    	//pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-                    	STA_PORT_SECURED(pAdapter);
-                }
-                else if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY)
-                {
-                    fnSetCipherKey(pAdapter, keyIdx, CIPHER_AES, TRUE, ext);
-
-                    // set 802.1x port control
-        	        //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-        	        STA_PORT_SECURED(pAdapter);
-                }
-                break;
-    		default:
-    			return -EINVAL;
-		}
-    }
-
-    return 0;
-}
-
-int
-rt_ioctl_giwencodeext(struct net_device *dev,
-			  struct iw_request_info *info,
-			  union iwreq_data *wrqu, char *extra)
-{
-	PRTMP_ADAPTER pAd = (PRTMP_ADAPTER) dev->priv;
-	PCHAR pKey = NULL;
-	struct iw_point *encoding = &wrqu->encoding;
-	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
-	int idx, max_key_len;
-
-	DBGPRINT(RT_DEBUG_TRACE ,("===> rt_ioctl_giwencodeext\n"));
-
-	max_key_len = encoding->length - sizeof(*ext);
-	if (max_key_len < 0)
-		return -EINVAL;
-
-	idx = encoding->flags & IW_ENCODE_INDEX;
-	if (idx)
-	{
-		if (idx < 1 || idx > 4)
-			return -EINVAL;
-		idx--;
-
-		if ((pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled) ||
-			(pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled))
-		{
-			if (idx != pAd->StaCfg.DefaultKeyId)
-			{
-				ext->key_len = 0;
-				return 0;
-			}
-		}
-	}
-	else
-		idx = pAd->StaCfg.DefaultKeyId;
-
-	encoding->flags = idx + 1;
-	memset(ext, 0, sizeof(*ext));
-
-	ext->key_len = 0;
-	switch(pAd->StaCfg.WepStatus) {
-		case Ndis802_11WEPDisabled:
-			ext->alg = IW_ENCODE_ALG_NONE;
-			encoding->flags |= IW_ENCODE_DISABLED;
-			break;
-		case Ndis802_11WEPEnabled:
-			ext->alg = IW_ENCODE_ALG_WEP;
-			if (pAd->SharedKey[BSS0][idx].KeyLen > max_key_len)
-				return -E2BIG;
-			else
-			{
-				ext->key_len = pAd->SharedKey[BSS0][idx].KeyLen;
-				pKey = &(pAd->SharedKey[BSS0][idx].Key[0]);
-			}
-			break;
-		case Ndis802_11Encryption2Enabled:
-		case Ndis802_11Encryption3Enabled:
-			if (pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled)
-				ext->alg = IW_ENCODE_ALG_TKIP;
-			else
-				ext->alg = IW_ENCODE_ALG_CCMP;
-
-			if (max_key_len < 32)
-				return -E2BIG;
-			else
-			{
-				ext->key_len = 32;
-				pKey = &pAd->StaCfg.PMK[0];
-			}
-			break;
-		default:
-			return -EINVAL;
-	}
-
-	if (ext->key_len && pKey)
-	{
-		encoding->flags |= IW_ENCODE_ENABLED;
-		memcpy(ext->key, pKey, ext->key_len);
-	}
-
-	return 0;
-}
-
-#ifdef SIOCSIWGENIE
-int rt_ioctl_siwgenie(struct net_device *dev,
-			  struct iw_request_info *info,
-			  union iwreq_data *wrqu, char *extra)
-{
-	PRTMP_ADAPTER   pAd = (PRTMP_ADAPTER) dev->priv;
-
-	if (wrqu->data.length > MAX_LEN_OF_RSNIE ||
-	    (wrqu->data.length && extra == NULL))
-		return -EINVAL;
-
-	if (wrqu->data.length)
-	{
-		pAd->StaCfg.RSNIE_Len = wrqu->data.length;
-		NdisMoveMemory(&pAd->StaCfg.RSN_IE[0], extra, pAd->StaCfg.RSNIE_Len);
-	}
-	else
-	{
-		pAd->StaCfg.RSNIE_Len = 0;
-		NdisZeroMemory(&pAd->StaCfg.RSN_IE[0], MAX_LEN_OF_RSNIE);
-	}
-
-	return 0;
-}
-#endif // SIOCSIWGENIE //
-
-int rt_ioctl_giwgenie(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-	PRTMP_ADAPTER   pAd = (PRTMP_ADAPTER) dev->priv;
-
-	if ((pAd->StaCfg.RSNIE_Len == 0) ||
-		(pAd->StaCfg.AuthMode < Ndis802_11AuthModeWPA))
-	{
-		wrqu->data.length = 0;
-		return 0;
-	}
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-#ifdef SIOCSIWGENIE
-	if (pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE)
-	{
-	if (wrqu->data.length < pAd->StaCfg.RSNIE_Len)
-		return -E2BIG;
-
-	wrqu->data.length = pAd->StaCfg.RSNIE_Len;
-	memcpy(extra, &pAd->StaCfg.RSN_IE[0], pAd->StaCfg.RSNIE_Len);
-	}
-	else
-#endif // SIOCSIWGENIE //
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-	{
-		UCHAR RSNIe = IE_WPA;
-
-		if (wrqu->data.length < (pAd->StaCfg.RSNIE_Len + 2)) // ID, Len
-			return -E2BIG;
-		wrqu->data.length = pAd->StaCfg.RSNIE_Len + 2;
-
-		if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK) ||
-            (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2))
-			RSNIe = IE_RSN;
-
-		extra[0] = (char)RSNIe;
-		extra[1] = pAd->StaCfg.RSNIE_Len;
-		memcpy(extra+2, &pAd->StaCfg.RSN_IE[0], pAd->StaCfg.RSNIE_Len);
-	}
-
-	return 0;
-}
-
-int rt_ioctl_siwpmksa(struct net_device *dev,
-			   struct iw_request_info *info,
-			   union iwreq_data *wrqu,
-			   char *extra)
-{
-	PRTMP_ADAPTER   pAd = (PRTMP_ADAPTER) dev->priv;
-	struct iw_pmksa *pPmksa = (struct iw_pmksa *)wrqu->data.pointer;
-	INT	CachedIdx = 0, idx = 0;
-
-	if (pPmksa == NULL)
-		return -EINVAL;
-
-	DBGPRINT(RT_DEBUG_TRACE ,("===> rt_ioctl_siwpmksa\n"));
-	switch(pPmksa->cmd)
-	{
-		case IW_PMKSA_FLUSH:
-			NdisZeroMemory(pAd->StaCfg.SavedPMK, sizeof(BSSID_INFO)*PMKID_NO);
-			DBGPRINT(RT_DEBUG_TRACE ,("rt_ioctl_siwpmksa - IW_PMKSA_FLUSH\n"));
-			break;
-		case IW_PMKSA_REMOVE:
-			for (CachedIdx = 0; CachedIdx < pAd->StaCfg.SavedPMKNum; CachedIdx++)
-			{
-		        // compare the BSSID
-		        if (NdisEqualMemory(pPmksa->bssid.sa_data, pAd->StaCfg.SavedPMK[CachedIdx].BSSID, MAC_ADDR_LEN))
-		        {
-		        	NdisZeroMemory(pAd->StaCfg.SavedPMK[CachedIdx].BSSID, MAC_ADDR_LEN);
-					NdisZeroMemory(pAd->StaCfg.SavedPMK[CachedIdx].PMKID, 16);
-					for (idx = CachedIdx; idx < (pAd->StaCfg.SavedPMKNum - 1); idx++)
-					{
-						NdisMoveMemory(&pAd->StaCfg.SavedPMK[idx].BSSID[0], &pAd->StaCfg.SavedPMK[idx+1].BSSID[0], MAC_ADDR_LEN);
-						NdisMoveMemory(&pAd->StaCfg.SavedPMK[idx].PMKID[0], &pAd->StaCfg.SavedPMK[idx+1].PMKID[0], 16);
-					}
-					pAd->StaCfg.SavedPMKNum--;
-			        break;
-		        }
-	        }
-
-			DBGPRINT(RT_DEBUG_TRACE ,("rt_ioctl_siwpmksa - IW_PMKSA_REMOVE\n"));
-			break;
-		case IW_PMKSA_ADD:
-			for (CachedIdx = 0; CachedIdx < pAd->StaCfg.SavedPMKNum; CachedIdx++)
-			{
-		        // compare the BSSID
-		        if (NdisEqualMemory(pPmksa->bssid.sa_data, pAd->StaCfg.SavedPMK[CachedIdx].BSSID, MAC_ADDR_LEN))
-			        break;
-	        }
-
-	        // Found, replace it
-	        if (CachedIdx < PMKID_NO)
-	        {
-		        DBGPRINT(RT_DEBUG_OFF, ("Update PMKID, idx = %d\n", CachedIdx));
-		        NdisMoveMemory(&pAd->StaCfg.SavedPMK[CachedIdx].BSSID[0], pPmksa->bssid.sa_data, MAC_ADDR_LEN);
-				NdisMoveMemory(&pAd->StaCfg.SavedPMK[CachedIdx].PMKID[0], pPmksa->pmkid, 16);
-		        pAd->StaCfg.SavedPMKNum++;
-	        }
-	        // Not found, replace the last one
-	        else
-	        {
-		        // Randomly replace one
-		        CachedIdx = (pPmksa->bssid.sa_data[5] % PMKID_NO);
-		        DBGPRINT(RT_DEBUG_OFF, ("Update PMKID, idx = %d\n", CachedIdx));
-		        NdisMoveMemory(&pAd->StaCfg.SavedPMK[CachedIdx].BSSID[0], pPmksa->bssid.sa_data, MAC_ADDR_LEN);
-				NdisMoveMemory(&pAd->StaCfg.SavedPMK[CachedIdx].PMKID[0], pPmksa->pmkid, 16);
-	        }
-
-			DBGPRINT(RT_DEBUG_TRACE ,("rt_ioctl_siwpmksa - IW_PMKSA_ADD\n"));
-			break;
-		default:
-			DBGPRINT(RT_DEBUG_TRACE ,("rt_ioctl_siwpmksa - Unknow Command!!\n"));
-			break;
-	}
-
-	return 0;
-}
-#endif // #if WIRELESS_EXT > 17
-
-#ifdef DBG
-static int
-rt_private_ioctl_bbp(struct net_device *dev, struct iw_request_info *info,
-		struct iw_point *wrq, char *extra)
-			{
-	CHAR				*this_char;
-	CHAR				*value = NULL;
-	UCHAR				regBBP = 0;
-//	CHAR				arg[255]={0};
-	UINT32				bbpId;
-	UINT32				bbpValue;
-	BOOLEAN				bIsPrintAllBBP = FALSE;
-	INT					Status = 0;
-    PRTMP_ADAPTER       pAdapter = (PRTMP_ADAPTER) dev->priv;
-
-
-	memset(extra, 0x00, IW_PRIV_SIZE_MASK);
-
-	if (wrq->length > 1) //No parameters.
-				{
-		sprintf(extra, "\n");
-
-		//Parsing Read or Write
-		this_char = wrq->pointer;
-		DBGPRINT(RT_DEBUG_TRACE, ("this_char=%s\n", this_char));
-		if (!*this_char)
-			goto next;
-
-		if ((value = rtstrchr(this_char, '=')) != NULL)
-			*value++ = 0;
-
-		if (!value || !*value)
-		{ //Read
-			DBGPRINT(RT_DEBUG_TRACE, ("this_char=%s, value=%s\n", this_char, value));
-			if (sscanf(this_char, "%d", &(bbpId)) == 1)
-			{
-				if (bbpId <= 136)
-				{
-#ifdef RALINK_ATE
-					if (ATE_ON(pAdapter))
-					{
-						ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-					}
-					else
-#endif // RALINK_ATE //
-					{
-					RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-					}
-					sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X\n", bbpId, bbpId*2, regBBP);
-                    wrq->length = strlen(extra) + 1; // 1: size of '\0'
-					DBGPRINT(RT_DEBUG_TRACE, ("msg=%s\n", extra));
-				}
-				else
-				{//Invalid parametes, so default printk all bbp
-					bIsPrintAllBBP = TRUE;
-					goto next;
-				}
-			}
-			else
-			{ //Invalid parametes, so default printk all bbp
-				bIsPrintAllBBP = TRUE;
-				goto next;
-			}
-		}
-		else
-		{ //Write
-			if ((sscanf(this_char, "%d", &(bbpId)) == 1) && (sscanf(value, "%x", &(bbpValue)) == 1))
-			{
-				if (bbpId <= 136)
-				{
-#ifdef RALINK_ATE
-					if (ATE_ON(pAdapter))
-					{
-						ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, bbpId, bbpValue);
-						//Read it back for showing
-						ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-					}
-					else
-#endif // RALINK_ATE //
-					{
-					    RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, bbpId, bbpValue);
-    					//Read it back for showing
-    					RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-			}
-					sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X\n", bbpId, bbpId*2, regBBP);
-                    wrq->length = strlen(extra) + 1; // 1: size of '\0'
-					DBGPRINT(RT_DEBUG_TRACE, ("msg=%s\n", extra));
-				}
-				else
-				{//Invalid parametes, so default printk all bbp
-					bIsPrintAllBBP = TRUE;
-					goto next;
-				}
-			}
-			else
-			{ //Invalid parametes, so default printk all bbp
-				bIsPrintAllBBP = TRUE;
-				goto next;
-			}
-		}
-		}
-	else
-		bIsPrintAllBBP = TRUE;
-
-next:
-	if (bIsPrintAllBBP)
-	{
-		memset(extra, 0x00, IW_PRIV_SIZE_MASK);
-		sprintf(extra, "\n");
-		for (bbpId = 0; bbpId <= 136; bbpId++)
-		{
-		    if (strlen(extra) >= (IW_PRIV_SIZE_MASK - 10))
-                break;
-#ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-			}
-			else
-#endif // RALINK_ATE //
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-			sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X    ", bbpId, bbpId*2, regBBP);
-			if (bbpId%5 == 4)
-				sprintf(extra+strlen(extra), "\n");
-		}
-
-        wrq->length = strlen(extra) + 1; // 1: size of '\0'
-        DBGPRINT(RT_DEBUG_TRACE, ("wrq->length = %d\n", wrq->length));
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<==rt_private_ioctl_bbp\n\n"));
-
-    return Status;
-}
-#endif // DBG //
-
-int rt_ioctl_siwrate(struct net_device *dev,
-			struct iw_request_info *info,
-			union iwreq_data *wrqu, char *extra)
-{
-    PRTMP_ADAPTER   pAd = (PRTMP_ADAPTER) dev->priv;
-    UINT32          rate = wrqu->bitrate.value, fixed = wrqu->bitrate.fixed;
-
-    //check if the interface is down
-	if(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-  		DBGPRINT(RT_DEBUG_TRACE, ("rt_ioctl_siwrate::Network is down!\n"));
-    	return -ENETDOWN;
-	}
-
-    DBGPRINT(RT_DEBUG_TRACE, ("rt_ioctl_siwrate::(rate = %d, fixed = %d)\n", rate, fixed));
-    /* rate = -1 => auto rate
-       rate = X, fixed = 1 => (fixed rate X)
-    */
-    if (rate == -1)
-    {
-		//Auto Rate
-		pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
-		pAd->StaCfg.bAutoTxRateSwitch = TRUE;
-		if ((pAd->CommonCfg.PhyMode <= PHY_11G) ||
-		    (pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE <= MODE_OFDM))
-			RTMPSetDesiredRates(pAd, -1);
-
-#ifdef DOT11_N_SUPPORT
-		SetCommonHT(pAd);
-#endif // DOT11_N_SUPPORT //
-    }
-    else
-    {
-        if (fixed)
-        {
-        	pAd->StaCfg.bAutoTxRateSwitch = FALSE;
-            if ((pAd->CommonCfg.PhyMode <= PHY_11G) ||
-                (pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE <= MODE_OFDM))
-                RTMPSetDesiredRates(pAd, rate);
-            else
-            {
-                pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
-#ifdef DOT11_N_SUPPORT
-                SetCommonHT(pAd);
-#endif // DOT11_N_SUPPORT //
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("rt_ioctl_siwrate::(HtMcs=%d)\n",pAd->StaCfg.DesiredTransmitSetting.field.MCS));
-        }
-        else
-        {
-            // TODO: rate = X, fixed = 0 => (rates <= X)
-            return -EOPNOTSUPP;
-        }
-    }
-
-    return 0;
-}
-
-int rt_ioctl_giwrate(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-    PRTMP_ADAPTER   pAd = (PRTMP_ADAPTER) dev->priv;
-    int rate_index = 0, rate_count = 0;
-    HTTRANSMIT_SETTING ht_setting;
-    __s32 ralinkrate[] =
-	{2,  4,   11,  22, // CCK
-	12, 18,   24,  36, 48, 72, 96, 108, // OFDM
-	13, 26,   39,  52,  78, 104, 117, 130, 26,  52,  78, 104, 156, 208, 234, 260, // 20MHz, 800ns GI, MCS: 0 ~ 15
-	39, 78,  117, 156, 234, 312, 351, 390,										  // 20MHz, 800ns GI, MCS: 16 ~ 23
-	27, 54,   81, 108, 162, 216, 243, 270, 54, 108, 162, 216, 324, 432, 486, 540, // 40MHz, 800ns GI, MCS: 0 ~ 15
-	81, 162, 243, 324, 486, 648, 729, 810,										  // 40MHz, 800ns GI, MCS: 16 ~ 23
-	14, 29,   43,  57,  87, 115, 130, 144, 29, 59,   87, 115, 173, 230, 260, 288, // 20MHz, 400ns GI, MCS: 0 ~ 15
-	43, 87,  130, 173, 260, 317, 390, 433,										  // 20MHz, 400ns GI, MCS: 16 ~ 23
-	30, 60,   90, 120, 180, 240, 270, 300, 60, 120, 180, 240, 360, 480, 540, 600, // 40MHz, 400ns GI, MCS: 0 ~ 15
-	90, 180, 270, 360, 540, 720, 810, 900};										  // 40MHz, 400ns GI, MCS: 16 ~ 23
-
-    rate_count = sizeof(ralinkrate)/sizeof(__s32);
-    //check if the interface is down
-	if(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-  		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-    	return -ENETDOWN;
-	}
-
-    if ((pAd->StaCfg.bAutoTxRateSwitch == FALSE) &&
-        (INFRA_ON(pAd)) &&
-        ((pAd->CommonCfg.PhyMode <= PHY_11G) || (pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE <= MODE_OFDM)))
-        ht_setting.word = pAd->StaCfg.HTPhyMode.word;
-    else
-        ht_setting.word = pAd->MacTab.Content[BSSID_WCID].HTPhyMode.word;
-
-#ifdef DOT11_N_SUPPORT
-    if (ht_setting.field.MODE >= MODE_HTMIX)
-    {
-//    	rate_index = 12 + ((UCHAR)ht_setting.field.BW *16) + ((UCHAR)ht_setting.field.ShortGI *32) + ((UCHAR)ht_setting.field.MCS);
-    	rate_index = 12 + ((UCHAR)ht_setting.field.BW *24) + ((UCHAR)ht_setting.field.ShortGI *48) + ((UCHAR)ht_setting.field.MCS);
-    }
-    else
-#endif // DOT11_N_SUPPORT //
-    if (ht_setting.field.MODE == MODE_OFDM)
-    	rate_index = (UCHAR)(ht_setting.field.MCS) + 4;
-    else if (ht_setting.field.MODE == MODE_CCK)
-    	rate_index = (UCHAR)(ht_setting.field.MCS);
-
-    if (rate_index < 0)
-        rate_index = 0;
-
-    if (rate_index > rate_count)
-        rate_index = rate_count;
-
-    wrqu->bitrate.value = ralinkrate[rate_index] * 500000;
-    wrqu->bitrate.disabled = 0;
-
-    return 0;
-}
-
-static const iw_handler rt_handler[] =
-{
-	(iw_handler) NULL,			            /* SIOCSIWCOMMIT */
-	(iw_handler) rt_ioctl_giwname,			/* SIOCGIWNAME   */
-	(iw_handler) NULL,			            /* SIOCSIWNWID   */
-	(iw_handler) NULL,			            /* SIOCGIWNWID   */
-	(iw_handler) rt_ioctl_siwfreq,		    /* SIOCSIWFREQ   */
-	(iw_handler) rt_ioctl_giwfreq,		    /* SIOCGIWFREQ   */
-	(iw_handler) rt_ioctl_siwmode,		    /* SIOCSIWMODE   */
-	(iw_handler) rt_ioctl_giwmode,		    /* SIOCGIWMODE   */
-	(iw_handler) NULL,		                /* SIOCSIWSENS   */
-	(iw_handler) NULL,		                /* SIOCGIWSENS   */
-	(iw_handler) NULL /* not used */,		/* SIOCSIWRANGE  */
-	(iw_handler) rt_ioctl_giwrange,		    /* SIOCGIWRANGE  */
-	(iw_handler) NULL /* not used */,		/* SIOCSIWPRIV   */
-	(iw_handler) NULL /* kernel code */,    /* SIOCGIWPRIV   */
-	(iw_handler) NULL /* not used */,		/* SIOCSIWSTATS  */
-	(iw_handler) rt28xx_get_wireless_stats /* kernel code */,    /* SIOCGIWSTATS  */
-	(iw_handler) NULL,		                /* SIOCSIWSPY    */
-	(iw_handler) NULL,		                /* SIOCGIWSPY    */
-	(iw_handler) NULL,				        /* SIOCSIWTHRSPY */
-	(iw_handler) NULL,				        /* SIOCGIWTHRSPY */
-	(iw_handler) rt_ioctl_siwap,            /* SIOCSIWAP     */
-	(iw_handler) rt_ioctl_giwap,		    /* SIOCGIWAP     */
-#ifdef SIOCSIWMLME
-	(iw_handler) rt_ioctl_siwmlme,	        /* SIOCSIWMLME   */
-#else
-	(iw_handler) NULL,				        /* SIOCSIWMLME */
-#endif // SIOCSIWMLME //
-	(iw_handler) rt_ioctl_iwaplist,		    /* SIOCGIWAPLIST */
-#ifdef SIOCGIWSCAN
-	(iw_handler) rt_ioctl_siwscan,		    /* SIOCSIWSCAN   */
-	(iw_handler) rt_ioctl_giwscan,		    /* SIOCGIWSCAN   */
-#else
-	(iw_handler) NULL,				        /* SIOCSIWSCAN   */
-	(iw_handler) NULL,				        /* SIOCGIWSCAN   */
-#endif /* SIOCGIWSCAN */
-	(iw_handler) rt_ioctl_siwessid,		    /* SIOCSIWESSID  */
-	(iw_handler) rt_ioctl_giwessid,		    /* SIOCGIWESSID  */
-	(iw_handler) rt_ioctl_siwnickn,		    /* SIOCSIWNICKN  */
-	(iw_handler) rt_ioctl_giwnickn,		    /* SIOCGIWNICKN  */
-	(iw_handler) NULL,				        /* -- hole --    */
-	(iw_handler) NULL,				        /* -- hole --    */
-	(iw_handler) rt_ioctl_siwrate,          /* SIOCSIWRATE   */
-	(iw_handler) rt_ioctl_giwrate,          /* SIOCGIWRATE   */
-	(iw_handler) rt_ioctl_siwrts,		    /* SIOCSIWRTS    */
-	(iw_handler) rt_ioctl_giwrts,		    /* SIOCGIWRTS    */
-	(iw_handler) rt_ioctl_siwfrag,		    /* SIOCSIWFRAG   */
-	(iw_handler) rt_ioctl_giwfrag,		    /* SIOCGIWFRAG   */
-	(iw_handler) NULL,		                /* SIOCSIWTXPOW  */
-	(iw_handler) NULL,		                /* SIOCGIWTXPOW  */
-	(iw_handler) NULL,		                /* SIOCSIWRETRY  */
-	(iw_handler) NULL,		                /* SIOCGIWRETRY  */
-	(iw_handler) rt_ioctl_siwencode,		/* SIOCSIWENCODE */
-	(iw_handler) rt_ioctl_giwencode,		/* SIOCGIWENCODE */
-	(iw_handler) NULL,		                /* SIOCSIWPOWER  */
-	(iw_handler) NULL,		                /* SIOCGIWPOWER  */
-	(iw_handler) NULL,						/* -- hole -- */
-	(iw_handler) NULL,						/* -- hole -- */
-#if WIRELESS_EXT > 17
-    (iw_handler) rt_ioctl_siwgenie,         /* SIOCSIWGENIE  */
-	(iw_handler) rt_ioctl_giwgenie,         /* SIOCGIWGENIE  */
-	(iw_handler) rt_ioctl_siwauth,		    /* SIOCSIWAUTH   */
-	(iw_handler) rt_ioctl_giwauth,		    /* SIOCGIWAUTH   */
-	(iw_handler) rt_ioctl_siwencodeext,	    /* SIOCSIWENCODEEXT */
-	(iw_handler) rt_ioctl_giwencodeext,		/* SIOCGIWENCODEEXT */
-	(iw_handler) rt_ioctl_siwpmksa,         /* SIOCSIWPMKSA  */
-#endif
-};
-
-static const iw_handler rt_priv_handlers[] = {
-	(iw_handler) NULL, /* + 0x00 */
-	(iw_handler) NULL, /* + 0x01 */
-#ifndef CONFIG_AP_SUPPORT
-	(iw_handler) rt_ioctl_setparam, /* + 0x02 */
-#else
-	(iw_handler) NULL, /* + 0x02 */
-#endif // CONFIG_AP_SUPPORT //
-#ifdef DBG
-	(iw_handler) rt_private_ioctl_bbp, /* + 0x03 */
-#else
-	(iw_handler) NULL, /* + 0x03 */
-#endif
-	(iw_handler) NULL, /* + 0x04 */
-	(iw_handler) NULL, /* + 0x05 */
-	(iw_handler) NULL, /* + 0x06 */
-	(iw_handler) NULL, /* + 0x07 */
-	(iw_handler) NULL, /* + 0x08 */
-	(iw_handler) rt_private_get_statistics, /* + 0x09 */
-	(iw_handler) NULL, /* + 0x0A */
-	(iw_handler) NULL, /* + 0x0B */
-	(iw_handler) NULL, /* + 0x0C */
-	(iw_handler) NULL, /* + 0x0D */
-	(iw_handler) NULL, /* + 0x0E */
-	(iw_handler) NULL, /* + 0x0F */
-	(iw_handler) NULL, /* + 0x10 */
-	(iw_handler) rt_private_show, /* + 0x11 */
-    (iw_handler) NULL, /* + 0x12 */
-	(iw_handler) NULL, /* + 0x13 */
-	(iw_handler) NULL, /* + 0x15 */
-	(iw_handler) NULL, /* + 0x17 */
-	(iw_handler) NULL, /* + 0x18 */
-};
-
-const struct iw_handler_def rt28xx_iw_handler_def =
-{
-#define	N(a)	(sizeof (a) / sizeof (a[0]))
-	.standard	= (iw_handler *) rt_handler,
-	.num_standard	= sizeof(rt_handler) / sizeof(iw_handler),
-	.private	= (iw_handler *) rt_priv_handlers,
-	.num_private		= N(rt_priv_handlers),
-	.private_args	= (struct iw_priv_args *) privtab,
-	.num_private_args	= N(privtab),
-#if IW_HANDLER_VERSION >= 7
-    .get_wireless_stats = rt28xx_get_wireless_stats,
-#endif
-};
-
-INT RTMPSetInformation(
-    IN  PRTMP_ADAPTER pAdapter,
-    IN  OUT struct ifreq    *rq,
-    IN  INT                 cmd)
-{
-    struct iwreq                        *wrq = (struct iwreq *) rq;
-    NDIS_802_11_SSID                    Ssid;
-    NDIS_802_11_MAC_ADDRESS             Bssid;
-    RT_802_11_PHY_MODE                  PhyMode;
-    RT_802_11_STA_CONFIG                StaConfig;
-    NDIS_802_11_RATES                   aryRates;
-    RT_802_11_PREAMBLE                  Preamble;
-    NDIS_802_11_WEP_STATUS              WepStatus;
-    NDIS_802_11_AUTHENTICATION_MODE     AuthMode = Ndis802_11AuthModeMax;
-    NDIS_802_11_NETWORK_INFRASTRUCTURE  BssType;
-    NDIS_802_11_RTS_THRESHOLD           RtsThresh;
-    NDIS_802_11_FRAGMENTATION_THRESHOLD FragThresh;
-    NDIS_802_11_POWER_MODE              PowerMode;
-    PNDIS_802_11_KEY                    pKey = NULL;
-    PNDIS_802_11_WEP			        pWepKey =NULL;
-    PNDIS_802_11_REMOVE_KEY             pRemoveKey = NULL;
-    NDIS_802_11_CONFIGURATION           Config, *pConfig = NULL;
-    NDIS_802_11_NETWORK_TYPE            NetType;
-    ULONG                               Now;
-    UINT                                KeyIdx = 0;
-    INT                                 Status = NDIS_STATUS_SUCCESS, MaxPhyMode = PHY_11G;
-    ULONG                               PowerTemp;
-    BOOLEAN                             RadioState;
-    BOOLEAN                             StateMachineTouched = FALSE;
-#ifdef DOT11_N_SUPPORT
-	OID_SET_HT_PHYMODE					HT_PhyMode;	//11n ,kathy
-#endif // DOT11_N_SUPPORT //
-#ifdef WPA_SUPPLICANT_SUPPORT
-    PNDIS_802_11_PMKID                  pPmkId = NULL;
-    BOOLEAN				                IEEE8021xState = FALSE;
-    BOOLEAN				                IEEE8021x_required_keys = FALSE;
-    UCHAR                               wpa_supplicant_enable = 0;
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef SNMP_SUPPORT
-	TX_RTY_CFG_STRUC			tx_rty_cfg;
-	ULONG						ShortRetryLimit, LongRetryLimit;
-	UCHAR						ctmp;
-#endif // SNMP_SUPPORT //
-
-
-
-#ifdef DOT11_N_SUPPORT
-	MaxPhyMode = PHY_11N_5G;
-#endif // DOT11_N_SUPPORT //
-
-
-	DBGPRINT(RT_DEBUG_TRACE, ("-->RTMPSetInformation(),	0x%08x\n", cmd&0x7FFF));
-    switch(cmd & 0x7FFF) {
-        case RT_OID_802_11_COUNTRY_REGION:
-            if (wrq->u.data.length < sizeof(UCHAR))
-                Status = -EINVAL;
-			// Only avaliable when EEPROM not programming
-            else if (!(pAdapter->CommonCfg.CountryRegion & 0x80) && !(pAdapter->CommonCfg.CountryRegionForABand & 0x80))
-            {
-                ULONG   Country;
-                UCHAR	TmpPhy;
-
-				Status = copy_from_user(&Country, wrq->u.data.pointer, wrq->u.data.length);
-				pAdapter->CommonCfg.CountryRegion = (UCHAR)(Country & 0x000000FF);
-				pAdapter->CommonCfg.CountryRegionForABand = (UCHAR)((Country >> 8) & 0x000000FF);
-                TmpPhy = pAdapter->CommonCfg.PhyMode;
-				pAdapter->CommonCfg.PhyMode = 0xff;
-				// Build all corresponding channel information
-				RTMPSetPhyMode(pAdapter, TmpPhy);
-#ifdef DOT11_N_SUPPORT
-				SetCommonHT(pAdapter);
-#endif // DOT11_N_SUPPORT //
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_COUNTRY_REGION (A:%d  B/G:%d)\n", pAdapter->CommonCfg.CountryRegionForABand,
-				    pAdapter->CommonCfg.CountryRegion));
-            }
-            break;
-        case OID_802_11_BSSID_LIST_SCAN:
- #ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				break;
-			}
-#endif // RALINK_ATE //
-            Now = jiffies;
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_BSSID_LIST_SCAN, TxCnt = %d \n", pAdapter->RalinkCounters.LastOneSecTotalTxCount));
-
-            if (MONITOR_ON(pAdapter))
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("!!! Driver is in Monitor Mode now !!!\n"));
-                break;
-            }
-
-			//Benson add 20080527, when radio off, sta don't need to scan
-			if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_RADIO_OFF))
-				break;
-
-			if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-			{
-                DBGPRINT(RT_DEBUG_TRACE, ("!!! Driver is scanning now !!!\n"));
-				pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE;
-				Status = NDIS_STATUS_SUCCESS;
-                break;
-            }
-
-			if (pAdapter->RalinkCounters.LastOneSecTotalTxCount > 100)
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("!!! Link UP, ignore this set::OID_802_11_BSSID_LIST_SCAN\n"));
-				Status = NDIS_STATUS_SUCCESS;
-				pAdapter->StaCfg.ScanCnt = 99;		// Prevent auto scan triggered by this OID
-				break;
-            }
-
-            if ((OPSTATUS_TEST_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED)) &&
-				((pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA) ||
-				(pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
-				(pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) ||
-				(pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)) &&
-                (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("!!! Link UP, Port Not Secured! ignore this set::OID_802_11_BSSID_LIST_SCAN\n"));
-				Status = NDIS_STATUS_SUCCESS;
-				pAdapter->StaCfg.ScanCnt = 99;		// Prevent auto scan triggered by this OID
-				break;
-            }
-
-
-            if (pAdapter->Mlme.CntlMachine.CurrState != CNTL_IDLE)
-            {
-                RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-                DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
-            }
-
-            // tell CNTL state machine to call NdisMSetInformationComplete() after completing
-            // this request, because this request is initiated by NDIS.
-            pAdapter->MlmeAux.CurrReqIsFromNdis = FALSE;
-            // Reset allowed scan retries
-            pAdapter->StaCfg.ScanCnt = 0;
-            pAdapter->StaCfg.LastScanTime = Now;
-
-			pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE;
-            RTMP_SET_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
-            MlmeEnqueue(pAdapter,
-                        MLME_CNTL_STATE_MACHINE,
-                        OID_802_11_BSSID_LIST_SCAN,
-                        0,
-                        NULL);
-
-            Status = NDIS_STATUS_SUCCESS;
-            StateMachineTouched = TRUE;
-            break;
-        case OID_802_11_SSID:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_SSID))
-                Status = -EINVAL;
-            else
-            {
-            	PCHAR pSsidString = NULL;
-                Status = copy_from_user(&Ssid, wrq->u.data.pointer, wrq->u.data.length);
-
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_SSID (Len=%d,Ssid=%s)\n", Ssid.SsidLength, Ssid.Ssid));
-                if (Ssid.SsidLength > MAX_LEN_OF_SSID)
-                    Status = -EINVAL;
-                else
-                {
-                	if (Ssid.SsidLength == 0)
-                	{
-                		Set_SSID_Proc(pAdapter, "");
-                	}
-					else
-                	{
-	                	pSsidString = (CHAR *) kmalloc(MAX_LEN_OF_SSID+1, MEM_ALLOC_FLAG);
-						if (pSsidString)
-						{
-							NdisZeroMemory(pSsidString, MAX_LEN_OF_SSID+1);
-							NdisMoveMemory(pSsidString, Ssid.Ssid, Ssid.SsidLength);
-	                		Set_SSID_Proc(pAdapter, pSsidString);
-							kfree(pSsidString);
-						}
-						else
-							Status = -ENOMEM;
-                	}
-                }
-            }
-            break;
-        case OID_802_11_BSSID:
-#ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				break;
-			}
-#endif // RALINK_ATE //
-            if (wrq->u.data.length != sizeof(NDIS_802_11_MAC_ADDRESS))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&Bssid, wrq->u.data.pointer, wrq->u.data.length);
-
-                // tell CNTL state machine to call NdisMSetInformationComplete() after completing
-                // this request, because this request is initiated by NDIS.
-                pAdapter->MlmeAux.CurrReqIsFromNdis = FALSE;
-
-				// Prevent to connect AP again in STAMlmePeriodicExec
-				pAdapter->MlmeAux.AutoReconnectSsidLen= 32;
-
-                // Reset allowed scan retries
-				pAdapter->StaCfg.ScanCnt = 0;
-
-                if (pAdapter->Mlme.CntlMachine.CurrState != CNTL_IDLE)
-                {
-                    RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-                    DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
-                }
-                MlmeEnqueue(pAdapter,
-                            MLME_CNTL_STATE_MACHINE,
-                            OID_802_11_BSSID,
-                            sizeof(NDIS_802_11_MAC_ADDRESS),
-                            (VOID *)&Bssid);
-                Status = NDIS_STATUS_SUCCESS;
-                StateMachineTouched = TRUE;
-
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_BSSID %02x:%02x:%02x:%02x:%02x:%02x\n",
-                                        Bssid[0], Bssid[1], Bssid[2], Bssid[3], Bssid[4], Bssid[5]));
-            }
-            break;
-        case RT_OID_802_11_RADIO:
-            if (wrq->u.data.length != sizeof(BOOLEAN))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&RadioState, wrq->u.data.pointer, wrq->u.data.length);
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_RADIO (=%d)\n", RadioState));
-                if (pAdapter->StaCfg.bSwRadio != RadioState)
-                {
-                    pAdapter->StaCfg.bSwRadio = RadioState;
-                    if (pAdapter->StaCfg.bRadio != (pAdapter->StaCfg.bHwRadio && pAdapter->StaCfg.bSwRadio))
-                    {
-                        pAdapter->StaCfg.bRadio = (pAdapter->StaCfg.bHwRadio && pAdapter->StaCfg.bSwRadio);
-                        if (pAdapter->StaCfg.bRadio == TRUE)
-                        {
-                            MlmeRadioOn(pAdapter);
-                            // Update extra information
-							pAdapter->ExtraInfo = EXTRA_INFO_CLEAR;
-                        }
-                        else
-                        {
-                            MlmeRadioOff(pAdapter);
-                            // Update extra information
-							pAdapter->ExtraInfo = SW_RADIO_OFF;
-                        }
-                    }
-                }
-            }
-            break;
-        case RT_OID_802_11_PHY_MODE:
-            if (wrq->u.data.length != sizeof(RT_802_11_PHY_MODE))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&PhyMode, wrq->u.data.pointer, wrq->u.data.length);
-				if (PhyMode <= MaxPhyMode)
-				{
-                	RTMPSetPhyMode(pAdapter, PhyMode);
-#ifdef DOT11_N_SUPPORT
-					SetCommonHT(pAdapter);
-#endif // DOT11_N_SUPPORT //
-				}
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_PHY_MODE (=%d)\n", PhyMode));
-            }
-            break;
-        case RT_OID_802_11_STA_CONFIG:
-            if (wrq->u.data.length != sizeof(RT_802_11_STA_CONFIG))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&StaConfig, wrq->u.data.pointer, wrq->u.data.length);
-                pAdapter->CommonCfg.bEnableTxBurst = StaConfig.EnableTxBurst;
-                pAdapter->CommonCfg.UseBGProtection = StaConfig.UseBGProtection;
-                pAdapter->CommonCfg.bUseShortSlotTime = 1; // 2003-10-30 always SHORT SLOT capable
-                if ((pAdapter->CommonCfg.PhyMode != StaConfig.AdhocMode) &&
-					(StaConfig.AdhocMode <= MaxPhyMode))
-                {
-                    // allow dynamic change of "USE OFDM rate or not" in ADHOC mode
-                    // if setting changed, need to reset current TX rate as well as BEACON frame format
-                    if (pAdapter->StaCfg.BssType == BSS_ADHOC)
-                    {
-						pAdapter->CommonCfg.PhyMode = StaConfig.AdhocMode;
-                    	RTMPSetPhyMode(pAdapter, PhyMode);
-                        MlmeUpdateTxRates(pAdapter, FALSE, 0);
-                        MakeIbssBeacon(pAdapter);           // re-build BEACON frame
-                        AsicEnableIbssSync(pAdapter);   // copy to on-chip memory
-                    }
-                }
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_STA_CONFIG (Burst=%d, Protection=%ld,ShortSlot=%d\n",
-                                        pAdapter->CommonCfg.bEnableTxBurst,
-                                        pAdapter->CommonCfg.UseBGProtection,
-                                        pAdapter->CommonCfg.bUseShortSlotTime));
-            }
-            break;
-        case OID_802_11_DESIRED_RATES:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_RATES))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&aryRates, wrq->u.data.pointer, wrq->u.data.length);
-                NdisZeroMemory(pAdapter->CommonCfg.DesireRate, MAX_LEN_OF_SUPPORTED_RATES);
-                NdisMoveMemory(pAdapter->CommonCfg.DesireRate, &aryRates, sizeof(NDIS_802_11_RATES));
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_DESIRED_RATES (%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x)\n",
-                    pAdapter->CommonCfg.DesireRate[0],pAdapter->CommonCfg.DesireRate[1],
-                    pAdapter->CommonCfg.DesireRate[2],pAdapter->CommonCfg.DesireRate[3],
-                    pAdapter->CommonCfg.DesireRate[4],pAdapter->CommonCfg.DesireRate[5],
-                    pAdapter->CommonCfg.DesireRate[6],pAdapter->CommonCfg.DesireRate[7] ));
-                // Changing DesiredRate may affect the MAX TX rate we used to TX frames out
-                MlmeUpdateTxRates(pAdapter, FALSE, 0);
-            }
-            break;
-        case RT_OID_802_11_PREAMBLE:
-            if (wrq->u.data.length != sizeof(RT_802_11_PREAMBLE))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&Preamble, wrq->u.data.pointer, wrq->u.data.length);
-                if (Preamble == Rt802_11PreambleShort)
-                {
-                    pAdapter->CommonCfg.TxPreamble = Preamble;
-                    MlmeSetTxPreamble(pAdapter, Rt802_11PreambleShort);
-                }
-                else if ((Preamble == Rt802_11PreambleLong) || (Preamble == Rt802_11PreambleAuto))
-                {
-                    // if user wants AUTO, initialize to LONG here, then change according to AP's
-                    // capability upon association.
-                    pAdapter->CommonCfg.TxPreamble = Preamble;
-                    MlmeSetTxPreamble(pAdapter, Rt802_11PreambleLong);
-                }
-                else
-                {
-                    Status = -EINVAL;
-                    break;
-                }
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_PREAMBLE (=%d)\n", Preamble));
-            }
-            break;
-        case OID_802_11_WEP_STATUS:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_WEP_STATUS))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&WepStatus, wrq->u.data.pointer, wrq->u.data.length);
-                // Since TKIP, AES, WEP are all supported. It should not have any invalid setting
-                if (WepStatus <= Ndis802_11Encryption3KeyAbsent)
-                {
-                    if (pAdapter->StaCfg.WepStatus != WepStatus)
-                    {
-                        // Config has changed
-                        pAdapter->bConfigChanged = TRUE;
-                    }
-                    pAdapter->StaCfg.WepStatus     = WepStatus;
-                    pAdapter->StaCfg.OrigWepStatus = WepStatus;
-                    pAdapter->StaCfg.PairCipher    = WepStatus;
-                	pAdapter->StaCfg.GroupCipher   = WepStatus;
-                }
-                else
-                {
-                    Status  = -EINVAL;
-                    break;
-                }
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_WEP_STATUS (=%d)\n",WepStatus));
-            }
-            break;
-        case OID_802_11_AUTHENTICATION_MODE:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_AUTHENTICATION_MODE))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&AuthMode, wrq->u.data.pointer, wrq->u.data.length);
-                if (AuthMode > Ndis802_11AuthModeMax)
-                {
-                    Status  = -EINVAL;
-                    break;
-                }
-                else
-                {
-                    if (pAdapter->StaCfg.AuthMode != AuthMode)
-                    {
-                        // Config has changed
-                        pAdapter->bConfigChanged = TRUE;
-                    }
-                    pAdapter->StaCfg.AuthMode = AuthMode;
-                }
-                pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_AUTHENTICATION_MODE (=%d) \n",pAdapter->StaCfg.AuthMode));
-            }
-            break;
-        case OID_802_11_INFRASTRUCTURE_MODE:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_NETWORK_INFRASTRUCTURE))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&BssType, wrq->u.data.pointer, wrq->u.data.length);
-
-				if (BssType == Ndis802_11IBSS)
-					Set_NetworkType_Proc(pAdapter, "Adhoc");
-				else if (BssType == Ndis802_11Infrastructure)
-					Set_NetworkType_Proc(pAdapter, "Infra");
-				else if (BssType == Ndis802_11Monitor)
-					Set_NetworkType_Proc(pAdapter, "Monitor");
-				else
-				{
-					Status  = -EINVAL;
-					DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_INFRASTRUCTURE_MODE (unknown)\n"));
-				}
-			}
-			break;
-	 case OID_802_11_REMOVE_WEP:
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_WEP\n"));
-            if (wrq->u.data.length != sizeof(NDIS_802_11_KEY_INDEX))
-            {
-				Status = -EINVAL;
-            }
-            else
-            {
-				KeyIdx = *(NDIS_802_11_KEY_INDEX *) wrq->u.data.pointer;
-
-				if (KeyIdx & 0x80000000)
-				{
-					// Should never set default bit when remove key
-					Status = -EINVAL;
-				}
-				else
-				{
-					KeyIdx = KeyIdx & 0x0fffffff;
-					if (KeyIdx >= 4){
-						Status = -EINVAL;
-					}
-					else
-					{
-						pAdapter->SharedKey[BSS0][KeyIdx].KeyLen = 0;
-						pAdapter->SharedKey[BSS0][KeyIdx].CipherAlg = CIPHER_NONE;
-						AsicRemoveSharedKeyEntry(pAdapter, 0, (UCHAR)KeyIdx);
-					}
-				}
-            }
-            break;
-        case RT_OID_802_11_RESET_COUNTERS:
-            NdisZeroMemory(&pAdapter->WlanCounters, sizeof(COUNTER_802_11));
-            NdisZeroMemory(&pAdapter->Counters8023, sizeof(COUNTER_802_3));
-            NdisZeroMemory(&pAdapter->RalinkCounters, sizeof(COUNTER_RALINK));
-            pAdapter->Counters8023.RxNoBuffer   = 0;
-			pAdapter->Counters8023.GoodReceives = 0;
-			pAdapter->Counters8023.RxNoBuffer   = 0;
-#ifdef RT2870
-			pAdapter->BulkOutComplete	= 0;
-			pAdapter->BulkOutCompleteOther= 0;
-			pAdapter->BulkOutCompleteCancel = 0;
-			pAdapter->BulkOutReq = 0;
-			pAdapter->BulkInReq= 0;
-			pAdapter->BulkInComplete = 0;
-			pAdapter->BulkInCompleteFail = 0;
-#endif // RT2870 //
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_RESET_COUNTERS \n"));
-            break;
-        case OID_802_11_RTS_THRESHOLD:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_RTS_THRESHOLD))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&RtsThresh, wrq->u.data.pointer, wrq->u.data.length);
-                if (RtsThresh > MAX_RTS_THRESHOLD)
-                    Status  = -EINVAL;
-                else
-                    pAdapter->CommonCfg.RtsThreshold = (USHORT)RtsThresh;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_RTS_THRESHOLD (=%ld)\n",RtsThresh));
-            break;
-        case OID_802_11_FRAGMENTATION_THRESHOLD:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_FRAGMENTATION_THRESHOLD))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&FragThresh, wrq->u.data.pointer, wrq->u.data.length);
-                pAdapter->CommonCfg.bUseZeroToDisableFragment = FALSE;
-                if (FragThresh > MAX_FRAG_THRESHOLD || FragThresh < MIN_FRAG_THRESHOLD)
-                {
-                    if (FragThresh == 0)
-                    {
-                        pAdapter->CommonCfg.FragmentThreshold = MAX_FRAG_THRESHOLD;
-                        pAdapter->CommonCfg.bUseZeroToDisableFragment = TRUE;
-                    }
-                    else
-                        Status  = -EINVAL;
-                }
-                else
-                    pAdapter->CommonCfg.FragmentThreshold = (USHORT)FragThresh;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_FRAGMENTATION_THRESHOLD (=%ld) \n",FragThresh));
-            break;
-        case OID_802_11_POWER_MODE:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_POWER_MODE))
-                Status = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&PowerMode, wrq->u.data.pointer, wrq->u.data.length);
-                if (PowerMode == Ndis802_11PowerModeCAM)
-                	Set_PSMode_Proc(pAdapter, "CAM");
-                else if (PowerMode == Ndis802_11PowerModeMAX_PSP)
-                	Set_PSMode_Proc(pAdapter, "Max_PSP");
-                else if (PowerMode == Ndis802_11PowerModeFast_PSP)
-					Set_PSMode_Proc(pAdapter, "Fast_PSP");
-                else if (PowerMode == Ndis802_11PowerModeLegacy_PSP)
-					Set_PSMode_Proc(pAdapter, "Legacy_PSP");
-                else
-                    Status = -EINVAL;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_POWER_MODE (=%d)\n",PowerMode));
-            break;
-         case RT_OID_802_11_TX_POWER_LEVEL_1:
-			if (wrq->u.data.length  < sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&PowerTemp, wrq->u.data.pointer, wrq->u.data.length);
-				if (PowerTemp > 100)
-					PowerTemp = 0xffffffff;  // AUTO
-				pAdapter->CommonCfg.TxPowerDefault = PowerTemp; //keep current setting.
-					pAdapter->CommonCfg.TxPowerPercentage = pAdapter->CommonCfg.TxPowerDefault;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_TX_POWER_LEVEL_1 (=%ld)\n", pAdapter->CommonCfg.TxPowerPercentage));
-			}
-	        break;
-		case OID_802_11_NETWORK_TYPE_IN_USE:
-			if (wrq->u.data.length != sizeof(NDIS_802_11_NETWORK_TYPE))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&NetType, wrq->u.data.pointer, wrq->u.data.length);
-
-				if (NetType == Ndis802_11DS)
-					RTMPSetPhyMode(pAdapter, PHY_11B);
-				else if (NetType == Ndis802_11OFDM24)
-					RTMPSetPhyMode(pAdapter, PHY_11BG_MIXED);
-				else if (NetType == Ndis802_11OFDM5)
-					RTMPSetPhyMode(pAdapter, PHY_11A);
-				else
-					Status = -EINVAL;
-#ifdef DOT11_N_SUPPORT
-				if (Status == NDIS_STATUS_SUCCESS)
-					SetCommonHT(pAdapter);
-#endif // DOT11_N_SUPPORT //
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_NETWORK_TYPE_IN_USE (=%d)\n",NetType));
-		    }
-			break;
-        // For WPA PSK PMK key
-        case RT_OID_802_11_ADD_WPA:
-            pKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-            if(pKey == NULL)
-            {
-                Status = -ENOMEM;
-                break;
-            }
-
-            Status = copy_from_user(pKey, wrq->u.data.pointer, wrq->u.data.length);
-            if (pKey->Length != wrq->u.data.length)
-            {
-                Status  = -EINVAL;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_WPA, Failed!!\n"));
-            }
-            else
-            {
-                if ((pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPAPSK) &&
-				    (pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPA2PSK) &&
-				    (pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPANone) )
-                {
-                    Status = -EOPNOTSUPP;
-                    DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_WPA, Failed!! [AuthMode != WPAPSK/WPA2PSK/WPANONE]\n"));
-                }
-                else if ((pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
-						 (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK) ||
-						 (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPANone) )     // Only for WPA PSK mode
-				{
-                    NdisMoveMemory(pAdapter->StaCfg.PMK, &pKey->KeyMaterial, pKey->KeyLength);
-                    // Use RaConfig as PSK agent.
-                    // Start STA supplicant state machine
-                    if (pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPANone)
-                        pAdapter->StaCfg.WpaState = SS_START;
-
-                    DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_WPA (id=0x%x, Len=%d-byte)\n", pKey->KeyIndex, pKey->KeyLength));
-                }
-                else
-                {
-                    pAdapter->StaCfg.WpaState = SS_NOTUSE;
-                    DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_WPA (id=0x%x, Len=%d-byte)\n", pKey->KeyIndex, pKey->KeyLength));
-                }
-            }
-            kfree(pKey);
-            break;
-        case OID_802_11_REMOVE_KEY:
-            pRemoveKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-            if(pRemoveKey == NULL)
-            {
-                Status = -ENOMEM;
-                break;
-            }
-
-            Status = copy_from_user(pRemoveKey, wrq->u.data.pointer, wrq->u.data.length);
-            if (pRemoveKey->Length != wrq->u.data.length)
-            {
-                Status  = -EINVAL;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY, Failed!!\n"));
-            }
-            else
-            {
-                if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-                {
-                    RTMPWPARemoveKeyProc(pAdapter, pRemoveKey);
-                    DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY, Remove WPA Key!!\n"));
-                }
-                else
-                {
-                    KeyIdx = pRemoveKey->KeyIndex;
-
-                    if (KeyIdx & 0x80000000)
-                    {
-                        // Should never set default bit when remove key
-                        Status  = -EINVAL;
-                        DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY, Failed!!(Should never set default bit when remove key)\n"));
-                    }
-                    else
-                    {
-                        KeyIdx = KeyIdx & 0x0fffffff;
-                        if (KeyIdx > 3)
-                        {
-                            Status  = -EINVAL;
-                            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY, Failed!!(KeyId[%d] out of range)\n", KeyIdx));
-                        }
-                        else
-                        {
-                            pAdapter->SharedKey[BSS0][KeyIdx].KeyLen = 0;
-                            pAdapter->SharedKey[BSS0][KeyIdx].CipherAlg = CIPHER_NONE;
-                            AsicRemoveSharedKeyEntry(pAdapter, 0, (UCHAR)KeyIdx);
-                            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY (id=0x%x, Len=%d-byte)\n", pRemoveKey->KeyIndex, pRemoveKey->Length));
-                        }
-                    }
-                }
-            }
-            kfree(pRemoveKey);
-            break;
-        // New for WPA
-        case OID_802_11_ADD_KEY:
-            pKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-            if(pKey == NULL)
-            {
-                Status = -ENOMEM;
-                break;
-            }
-            Status = copy_from_user(pKey, wrq->u.data.pointer, wrq->u.data.length);
-            if (pKey->Length != wrq->u.data.length)
-            {
-                Status  = -EINVAL;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_KEY, Failed!!\n"));
-            }
-            else
-            {
-                RTMPAddKey(pAdapter, pKey);
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_KEY (id=0x%x, Len=%d-byte)\n", pKey->KeyIndex, pKey->KeyLength));
-            }
-            kfree(pKey);
-            break;
-        case OID_802_11_CONFIGURATION:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_CONFIGURATION))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&Config, wrq->u.data.pointer, wrq->u.data.length);
-                pConfig = &Config;
-
-                if ((pConfig->BeaconPeriod >= 20) && (pConfig->BeaconPeriod <=400))
-                     pAdapter->CommonCfg.BeaconPeriod = (USHORT) pConfig->BeaconPeriod;
-
-                pAdapter->StaActive.AtimWin = (USHORT) pConfig->ATIMWindow;
-                MAP_KHZ_TO_CHANNEL_ID(pConfig->DSConfig, pAdapter->CommonCfg.Channel);
-                //
-				// Save the channel on MlmeAux for CntlOidRTBssidProc used.
-				//
-				pAdapter->MlmeAux.Channel = pAdapter->CommonCfg.Channel;
-
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_CONFIGURATION (BeacnPeriod=%ld,AtimW=%ld,Ch=%d)\n",
-                    pConfig->BeaconPeriod, pConfig->ATIMWindow, pAdapter->CommonCfg.Channel));
-                // Config has changed
-                pAdapter->bConfigChanged = TRUE;
-            }
-            break;
-#ifdef DOT11_N_SUPPORT
-		case RT_OID_802_11_SET_HT_PHYMODE:
-			if (wrq->u.data.length	!= sizeof(OID_SET_HT_PHYMODE))
-				Status = -EINVAL;
-			else
-			{
-			    POID_SET_HT_PHYMODE	pHTPhyMode = &HT_PhyMode;
-
-				Status = copy_from_user(&HT_PhyMode, wrq->u.data.pointer, wrq->u.data.length);
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::pHTPhyMode	(PhyMode = %d,TransmitNo = %d, HtMode =	%d,	ExtOffset =	%d , MCS = %d, BW =	%d,	STBC = %d, SHORTGI = %d) \n",
-				pHTPhyMode->PhyMode, pHTPhyMode->TransmitNo,pHTPhyMode->HtMode,pHTPhyMode->ExtOffset,
-				pHTPhyMode->MCS, pHTPhyMode->BW, pHTPhyMode->STBC,	pHTPhyMode->SHORTGI));
-				if (pAdapter->CommonCfg.PhyMode	>= PHY_11ABGN_MIXED)
-					RTMPSetHT(pAdapter,	pHTPhyMode);
-			}
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_HT_PHYMODE(MCS=%d,BW=%d,SGI=%d,STBC=%d)\n",
-				pAdapter->StaCfg.HTPhyMode.field.MCS, pAdapter->StaCfg.HTPhyMode.field.BW, pAdapter->StaCfg.HTPhyMode.field.ShortGI,
-				pAdapter->StaCfg.HTPhyMode.field.STBC));
-			break;
-#endif // DOT11_N_SUPPORT //
-		case RT_OID_802_11_SET_APSD_SETTING:
-			if (wrq->u.data.length != sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				ULONG apsd ;
-				Status = copy_from_user(&apsd, wrq->u.data.pointer,	wrq->u.data.length);
-
-				/*-------------------------------------------------------------------
-				|B31~B7	|	B6~B5	 |	 B4	 |	 B3	 |	B2	 |	B1	 |	   B0		|
-				---------------------------------------------------------------------
-				| Rsvd	| Max SP Len | AC_VO | AC_VI | AC_BK | AC_BE | APSD	Capable	|
-				---------------------------------------------------------------------*/
-				pAdapter->CommonCfg.bAPSDCapable = (apsd & 0x00000001) ? TRUE :	FALSE;
-				pAdapter->CommonCfg.bAPSDAC_BE = ((apsd	& 0x00000002) >> 1)	? TRUE : FALSE;
-				pAdapter->CommonCfg.bAPSDAC_BK = ((apsd	& 0x00000004) >> 2)	? TRUE : FALSE;
-				pAdapter->CommonCfg.bAPSDAC_VI = ((apsd	& 0x00000008) >> 3)	? TRUE : FALSE;
-				pAdapter->CommonCfg.bAPSDAC_VO = ((apsd	& 0x00000010) >> 4)	? TRUE : FALSE;
-				pAdapter->CommonCfg.MaxSPLength	= (UCHAR)((apsd	& 0x00000060) >> 5);
-
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_APSD_SETTING (apsd=0x%lx, APSDCap=%d, [BE,BK,VI,VO]=[%d/%d/%d/%d],	MaxSPLen=%d)\n", apsd, pAdapter->CommonCfg.bAPSDCapable,
-					pAdapter->CommonCfg.bAPSDAC_BE,	pAdapter->CommonCfg.bAPSDAC_BK,	pAdapter->CommonCfg.bAPSDAC_VI,	pAdapter->CommonCfg.bAPSDAC_VO,	pAdapter->CommonCfg.MaxSPLength));
-			}
-			break;
-
-		case RT_OID_802_11_SET_APSD_PSM:
-			if (wrq->u.data.length	!= sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				// Driver needs	to notify AP when PSM changes
-				Status = copy_from_user(&pAdapter->CommonCfg.bAPSDForcePowerSave, wrq->u.data.pointer, wrq->u.data.length);
-				if (pAdapter->CommonCfg.bAPSDForcePowerSave	!= pAdapter->StaCfg.Psm)
-				{
-					MlmeSetPsmBit(pAdapter,	pAdapter->CommonCfg.bAPSDForcePowerSave);
-					RTMPSendNullFrame(pAdapter,	pAdapter->CommonCfg.TxRate,	TRUE);
-				}
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_APSD_PSM (bAPSDForcePowerSave:%d)\n",	pAdapter->CommonCfg.bAPSDForcePowerSave));
-			}
-			break;
-#ifdef QOS_DLS_SUPPORT
-		case RT_OID_802_11_SET_DLS:
-			if (wrq->u.data.length != sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				BOOLEAN	oldvalue = pAdapter->CommonCfg.bDLSCapable;
-				Status = copy_from_user(&pAdapter->CommonCfg.bDLSCapable, wrq->u.data.pointer, wrq->u.data.length);
-				if (oldvalue &&	!pAdapter->CommonCfg.bDLSCapable)
-				{
-					int	i;
-					// tear	down local dls table entry
-					for	(i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-					{
-						if (pAdapter->StaCfg.DLSEntry[i].Valid && (pAdapter->StaCfg.DLSEntry[i].Status == DLS_FINISH))
-						{
-							pAdapter->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-							pAdapter->StaCfg.DLSEntry[i].Valid	= FALSE;
-							RTMPSendDLSTearDownFrame(pAdapter, pAdapter->StaCfg.DLSEntry[i].MacAddr);
-						}
-					}
-
-					// tear	down peer dls table	entry
-					for	(i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
-					{
-						if (pAdapter->StaCfg.DLSEntry[i].Valid && (pAdapter->StaCfg.DLSEntry[i].Status == DLS_FINISH))
-						{
-							pAdapter->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-							pAdapter->StaCfg.DLSEntry[i].Valid	= FALSE;
-							RTMPSendDLSTearDownFrame(pAdapter, pAdapter->StaCfg.DLSEntry[i].MacAddr);
-						}
-					}
-				}
-
-				DBGPRINT(RT_DEBUG_TRACE,("Set::RT_OID_802_11_SET_DLS (=%d)\n", pAdapter->CommonCfg.bDLSCapable));
-			}
-			break;
-
-		case RT_OID_802_11_SET_DLS_PARAM:
-			if (wrq->u.data.length	!= sizeof(RT_802_11_DLS_UI))
-				Status = -EINVAL;
-			else
-			{
-				RT_802_11_DLS	Dls;
-
-				NdisZeroMemory(&Dls, sizeof(RT_802_11_DLS));
-				RTMPMoveMemory(&Dls, wrq->u.data.pointer, sizeof(RT_802_11_DLS_UI));
-				MlmeEnqueue(pAdapter,
-							MLME_CNTL_STATE_MACHINE,
-							RT_OID_802_11_SET_DLS_PARAM,
-							sizeof(RT_802_11_DLS),
-							&Dls);
-				DBGPRINT(RT_DEBUG_TRACE,("Set::RT_OID_802_11_SET_DLS_PARAM \n"));
-			}
-			break;
-#endif // QOS_DLS_SUPPORT //
-		case RT_OID_802_11_SET_WMM:
-			if (wrq->u.data.length	!= sizeof(BOOLEAN))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&pAdapter->CommonCfg.bWmmCapable, wrq->u.data.pointer, wrq->u.data.length);
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_WMM (=%d)	\n", pAdapter->CommonCfg.bWmmCapable));
-			}
-			break;
-
-		case OID_802_11_DISASSOCIATE:
-#ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				break;
-			}
-#endif // RALINK_ATE //
-			//
-			// Set NdisRadioStateOff to	TRUE, instead of called	MlmeRadioOff.
-			// Later on, NDIS_802_11_BSSID_LIST_EX->NumberOfItems should be	0
-			// when	query OID_802_11_BSSID_LIST.
-			//
-			// TRUE:  NumberOfItems	will set to	0.
-			// FALSE: NumberOfItems	no change.
-			//
-			pAdapter->CommonCfg.NdisRadioStateOff =	TRUE;
-			// Set to immediately send the media disconnect	event
-			pAdapter->MlmeAux.CurrReqIsFromNdis	= TRUE;
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_DISASSOCIATE	\n"));
-
-			if (INFRA_ON(pAdapter))
-			{
-				if (pAdapter->Mlme.CntlMachine.CurrState !=	CNTL_IDLE)
-				{
-					RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-					DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME	busy, reset	MLME state machine !!!\n"));
-				}
-
-				MlmeEnqueue(pAdapter,
-					MLME_CNTL_STATE_MACHINE,
-					OID_802_11_DISASSOCIATE,
-					0,
-					NULL);
-
-				StateMachineTouched	= TRUE;
-			}
-			break;
-
-#ifdef DOT11_N_SUPPORT
-		case RT_OID_802_11_SET_IMME_BA_CAP:
-				if (wrq->u.data.length != sizeof(OID_BACAP_STRUC))
-					Status = -EINVAL;
-				else
-				{
-					OID_BACAP_STRUC Orde ;
-					Status = copy_from_user(&Orde, wrq->u.data.pointer, wrq->u.data.length);
-					if (Orde.Policy > BA_NOTUSE)
-					{
-						Status = NDIS_STATUS_INVALID_DATA;
-					}
-					else if (Orde.Policy == BA_NOTUSE)
-					{
-						pAdapter->CommonCfg.BACapability.field.Policy = BA_NOTUSE;
-						pAdapter->CommonCfg.BACapability.field.MpduDensity = Orde.MpduDensity;
-						pAdapter->CommonCfg.DesiredHtPhy.MpduDensity = Orde.MpduDensity;
-						pAdapter->CommonCfg.DesiredHtPhy.AmsduEnable = Orde.AmsduEnable;
-						pAdapter->CommonCfg.DesiredHtPhy.AmsduSize= Orde.AmsduSize;
-						pAdapter->CommonCfg.DesiredHtPhy.MimoPs= Orde.MMPSmode;
-						pAdapter->CommonCfg.BACapability.field.MMPSmode = Orde.MMPSmode;
-						// UPdata to HT IE
-						pAdapter->CommonCfg.HtCapability.HtCapInfo.MimoPs = Orde.MMPSmode;
-						pAdapter->CommonCfg.HtCapability.HtCapInfo.AMsduSize = Orde.AmsduSize;
-						pAdapter->CommonCfg.HtCapability.HtCapParm.MpduDensity = Orde.MpduDensity;
-					}
-					else
-					{
-                        pAdapter->CommonCfg.BACapability.field.AutoBA = Orde.AutoBA;
-						pAdapter->CommonCfg.BACapability.field.Policy = IMMED_BA; // we only support immediate BA.
-						pAdapter->CommonCfg.BACapability.field.MpduDensity = Orde.MpduDensity;
-						pAdapter->CommonCfg.DesiredHtPhy.MpduDensity = Orde.MpduDensity;
-						pAdapter->CommonCfg.DesiredHtPhy.AmsduEnable = Orde.AmsduEnable;
-						pAdapter->CommonCfg.DesiredHtPhy.AmsduSize= Orde.AmsduSize;
-						pAdapter->CommonCfg.DesiredHtPhy.MimoPs = Orde.MMPSmode;
-						pAdapter->CommonCfg.BACapability.field.MMPSmode = Orde.MMPSmode;
-
-						// UPdata to HT IE
-						pAdapter->CommonCfg.HtCapability.HtCapInfo.MimoPs = Orde.MMPSmode;
-						pAdapter->CommonCfg.HtCapability.HtCapInfo.AMsduSize = Orde.AmsduSize;
-						pAdapter->CommonCfg.HtCapability.HtCapParm.MpduDensity = Orde.MpduDensity;
-
-						if (pAdapter->CommonCfg.BACapability.field.RxBAWinLimit > MAX_RX_REORDERBUF)
-							pAdapter->CommonCfg.BACapability.field.RxBAWinLimit = MAX_RX_REORDERBUF;
-
-					}
-
-					pAdapter->CommonCfg.REGBACapability.word = pAdapter->CommonCfg.BACapability.word;
-					DBGPRINT(RT_DEBUG_TRACE, ("Set::(Orde.AutoBA = %d) (Policy=%d)(ReBAWinLimit=%d)(TxBAWinLimit=%d)(AutoMode=%d)\n",Orde.AutoBA, pAdapter->CommonCfg.BACapability.field.Policy,
-						pAdapter->CommonCfg.BACapability.field.RxBAWinLimit,pAdapter->CommonCfg.BACapability.field.TxBAWinLimit, pAdapter->CommonCfg.BACapability.field.AutoBA));
-					DBGPRINT(RT_DEBUG_TRACE, ("Set::(MimoPs = %d)(AmsduEnable = %d) (AmsduSize=%d)(MpduDensity=%d)\n",pAdapter->CommonCfg.DesiredHtPhy.MimoPs, pAdapter->CommonCfg.DesiredHtPhy.AmsduEnable,
-						pAdapter->CommonCfg.DesiredHtPhy.AmsduSize, pAdapter->CommonCfg.DesiredHtPhy.MpduDensity));
-				}
-
-				break;
-		case RT_OID_802_11_ADD_IMME_BA:
-			DBGPRINT(RT_DEBUG_TRACE, (" Set :: RT_OID_802_11_ADD_IMME_BA \n"));
-			if (wrq->u.data.length != sizeof(OID_ADD_BA_ENTRY))
-					Status = -EINVAL;
-			else
-			{
-				UCHAR		        index;
-				OID_ADD_BA_ENTRY    BA;
-				MAC_TABLE_ENTRY     *pEntry;
-
-				Status = copy_from_user(&BA, wrq->u.data.pointer, wrq->u.data.length);
-				if (BA.TID > 15)
-				{
-					Status = NDIS_STATUS_INVALID_DATA;
-					break;
-				}
-				else
-				{
-					//BATableInsertEntry
-					//As ad-hoc mode, BA pair is not limited to only BSSID. so add via OID.
-					index = BA.TID;
-					// in ad hoc mode, when adding BA pair, we should insert this entry into MACEntry too
-					pEntry = MacTableLookup(pAdapter, BA.MACAddr);
-					if (!pEntry)
-					{
-						DBGPRINT(RT_DEBUG_TRACE, ("RT_OID_802_11_ADD_IMME_BA. break on no connection.----:%x:%x\n", BA.MACAddr[4], BA.MACAddr[5]));
-						break;
-					}
-					if (BA.IsRecipient == FALSE)
-					{
-					    if (pEntry->bIAmBadAtheros == TRUE)
-							pAdapter->CommonCfg.BACapability.field.RxBAWinLimit = 0x10;
-
-						BAOriSessionSetUp(pAdapter, pEntry, index, 0, 100, TRUE);
-					}
-					else
-					{
-						//BATableInsertEntry(pAdapter, pEntry->Aid, BA.MACAddr, 0, 0xffff, BA.TID, BA.nMSDU, BA.IsRecipient);
-					}
-
-					DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_IMME_BA. Rec = %d. Mac = %x:%x:%x:%x:%x:%x . \n",
-						BA.IsRecipient, BA.MACAddr[0], BA.MACAddr[1], BA.MACAddr[2], BA.MACAddr[2]
-						, BA.MACAddr[4], BA.MACAddr[5]));
-				}
-			}
-			break;
-
-		case RT_OID_802_11_TEAR_IMME_BA:
-			DBGPRINT(RT_DEBUG_TRACE, ("Set :: RT_OID_802_11_TEAR_IMME_BA \n"));
-			if (wrq->u.data.length != sizeof(OID_ADD_BA_ENTRY))
-					Status = -EINVAL;
-			else
-			{
-				POID_ADD_BA_ENTRY	pBA;
-				MAC_TABLE_ENTRY *pEntry;
-
-				pBA = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-
-				if (pBA == NULL)
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("Set :: RT_OID_802_11_TEAR_IMME_BA kmalloc() can't allocate enough memory\n"));
-					Status = NDIS_STATUS_FAILURE;
-				}
-				else
-				{
-					Status = copy_from_user(pBA, wrq->u.data.pointer, wrq->u.data.length);
-					DBGPRINT(RT_DEBUG_TRACE, ("Set :: RT_OID_802_11_TEAR_IMME_BA(TID=%d, bAllTid=%d)\n", pBA->TID, pBA->bAllTid));
-
-					if (!pBA->bAllTid && (pBA->TID > NUM_OF_TID))
-					{
-						Status = NDIS_STATUS_INVALID_DATA;
-						break;
-					}
-
-					if (pBA->IsRecipient == FALSE)
-					{
-						pEntry = MacTableLookup(pAdapter, pBA->MACAddr);
-						DBGPRINT(RT_DEBUG_TRACE, (" pBA->IsRecipient == FALSE\n"));
-						if (pEntry)
-						{
-							DBGPRINT(RT_DEBUG_TRACE, (" pBA->pEntry\n"));
-							BAOriSessionTearDown(pAdapter, pEntry->Aid, pBA->TID, FALSE, TRUE);
-						}
-						else
-							DBGPRINT(RT_DEBUG_TRACE, ("Set :: Not found pEntry \n"));
-					}
-					else
-					{
-						pEntry = MacTableLookup(pAdapter, pBA->MACAddr);
-						if (pEntry)
-						{
-							BARecSessionTearDown( pAdapter, (UCHAR)pEntry->Aid, pBA->TID, TRUE);
-						}
-						else
-							DBGPRINT(RT_DEBUG_TRACE, ("Set :: Not found pEntry \n"));
-					}
-					kfree(pBA);
-				}
-            }
-            break;
-#endif // DOT11_N_SUPPORT //
-
-        // For WPA_SUPPLICANT to set static wep key
-    	case OID_802_11_ADD_WEP:
-    	    pWepKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-
-    	    if(pWepKey == NULL)
-            {
-                Status = -ENOMEM;
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP, Failed!!\n"));
-                break;
-            }
-            Status = copy_from_user(pWepKey, wrq->u.data.pointer, wrq->u.data.length);
-            if (Status)
-            {
-                Status  = -EINVAL;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP, Failed (length mismatch)!!\n"));
-            }
-            else
-            {
-		        KeyIdx = pWepKey->KeyIndex & 0x0fffffff;
-                // KeyIdx must be 0 ~ 3
-                if (KeyIdx > 4)
-    			{
-                    Status  = -EINVAL;
-                    DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP, Failed (KeyIdx must be smaller than 4)!!\n"));
-                }
-                else
-                {
-                    UCHAR CipherAlg = 0;
-                    PUCHAR Key;
-
-                    // set key material and key length
-                    NdisZeroMemory(pAdapter->SharedKey[BSS0][KeyIdx].Key, 16);
-                    pAdapter->SharedKey[BSS0][KeyIdx].KeyLen = (UCHAR) pWepKey->KeyLength;
-                    NdisMoveMemory(pAdapter->SharedKey[BSS0][KeyIdx].Key, &pWepKey->KeyMaterial, pWepKey->KeyLength);
-
-                    switch(pWepKey->KeyLength)
-                    {
-                        case 5:
-                            CipherAlg = CIPHER_WEP64;
-                            break;
-                        case 13:
-                            CipherAlg = CIPHER_WEP128;
-                            break;
-                        default:
-                            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP, only support CIPHER_WEP64(len:5) & CIPHER_WEP128(len:13)!!\n"));
-                            Status = -EINVAL;
-                            break;
-                    }
-                    pAdapter->SharedKey[BSS0][KeyIdx].CipherAlg = CipherAlg;
-
-                    // Default key for tx (shared key)
-                    if (pWepKey->KeyIndex & 0x80000000)
-                    {
-#ifdef WPA_SUPPLICANT_SUPPORT
-                        // set key material and key length
-                        NdisZeroMemory(pAdapter->StaCfg.DesireSharedKey[KeyIdx].Key, 16);
-                        pAdapter->StaCfg.DesireSharedKey[KeyIdx].KeyLen = (UCHAR) pWepKey->KeyLength;
-                        NdisMoveMemory(pAdapter->StaCfg.DesireSharedKey[KeyIdx].Key, &pWepKey->KeyMaterial, pWepKey->KeyLength);
-                        pAdapter->StaCfg.DesireSharedKeyId = KeyIdx;
-                        pAdapter->StaCfg.DesireSharedKey[KeyIdx].CipherAlg = CipherAlg;
-#endif // WPA_SUPPLICANT_SUPPORT //
-                        pAdapter->StaCfg.DefaultKeyId = (UCHAR) KeyIdx;
-                    }
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-                    if (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED)
-#endif // WPA_SUPPLICANT_SUPPORT
-                    {
-                        Key = pAdapter->SharedKey[BSS0][KeyIdx].Key;
-
-                        // Set key material and cipherAlg to Asic
-        				AsicAddSharedKeyEntry(pAdapter, BSS0, KeyIdx, CipherAlg, Key, NULL, NULL);
-
-                        if (pWepKey->KeyIndex & 0x80000000)
-                        {
-                            PMAC_TABLE_ENTRY pEntry = &pAdapter->MacTab.Content[BSSID_WCID];
-                            // Assign group key info
-    						RTMPAddWcidAttributeEntry(pAdapter, BSS0, KeyIdx, CipherAlg, NULL);
-    						// Assign pairwise key info
-    						RTMPAddWcidAttributeEntry(pAdapter, BSS0, KeyIdx, CipherAlg, pEntry);
-                        }
-                    }
-					DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP (id=0x%x, Len=%d-byte), %s\n", pWepKey->KeyIndex, pWepKey->KeyLength, (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED) ? "Port Secured":"Port NOT Secured"));
-				}
-            }
-            kfree(pWepKey);
-            break;
-#ifdef WPA_SUPPLICANT_SUPPORT
-	    case OID_SET_COUNTERMEASURES:
-            if (wrq->u.data.length != sizeof(int))
-                Status  = -EINVAL;
-            else
-            {
-                int enabled = 0;
-                Status = copy_from_user(&enabled, wrq->u.data.pointer, wrq->u.data.length);
-                if (enabled == 1)
-                    pAdapter->StaCfg.bBlockAssoc = TRUE;
-                else
-                    // WPA MIC error should block association attempt for 60 seconds
-                    pAdapter->StaCfg.bBlockAssoc = FALSE;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_SET_COUNTERMEASURES bBlockAssoc=%s\n", pAdapter->StaCfg.bBlockAssoc ? "TRUE":"FALSE"));
-            }
-	        break;
-        case RT_OID_WPA_SUPPLICANT_SUPPORT:
-			if (wrq->u.data.length != sizeof(UCHAR))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&wpa_supplicant_enable, wrq->u.data.pointer, wrq->u.data.length);
-    			pAdapter->StaCfg.WpaSupplicantUP = wpa_supplicant_enable;
-    			DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_WPA_SUPPLICANT_SUPPORT (=%d)\n", pAdapter->StaCfg.WpaSupplicantUP));
-			}
-            break;
-        case OID_802_11_DEAUTHENTICATION:
-            if (wrq->u.data.length != sizeof(MLME_DEAUTH_REQ_STRUCT))
-                Status  = -EINVAL;
-            else
-            {
-                MLME_DEAUTH_REQ_STRUCT      *pInfo;
-				MLME_QUEUE_ELEM *MsgElem = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);
-
-                pInfo = (MLME_DEAUTH_REQ_STRUCT *) MsgElem->Msg;
-                Status = copy_from_user(pInfo, wrq->u.data.pointer, wrq->u.data.length);
-                MlmeDeauthReqAction(pAdapter, MsgElem);
-				kfree(MsgElem);
-
-                if (INFRA_ON(pAdapter))
-                {
-                    LinkDown(pAdapter, FALSE);
-                    pAdapter->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-                }
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_DEAUTHENTICATION (Reason=%d)\n", pInfo->Reason));
-            }
-            break;
-        case OID_802_11_DROP_UNENCRYPTED:
-            if (wrq->u.data.length != sizeof(int))
-                Status  = -EINVAL;
-            else
-            {
-                int enabled = 0;
-                Status = copy_from_user(&enabled, wrq->u.data.pointer, wrq->u.data.length);
-                if (enabled == 1)
-                    pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-                else
-                    pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-				NdisAcquireSpinLock(&pAdapter->MacTabLock);
-				pAdapter->MacTab.Content[BSSID_WCID].PortSecured = pAdapter->StaCfg.PortSecured;
-				NdisReleaseSpinLock(&pAdapter->MacTabLock);
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_DROP_UNENCRYPTED (=%d)\n", enabled));
-            }
-            break;
-        case OID_802_11_SET_IEEE8021X:
-            if (wrq->u.data.length != sizeof(BOOLEAN))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&IEEE8021xState, wrq->u.data.pointer, wrq->u.data.length);
-		        pAdapter->StaCfg.IEEE8021X = IEEE8021xState;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_SET_IEEE8021X (=%d)\n", IEEE8021xState));
-            }
-            break;
-        case OID_802_11_SET_IEEE8021X_REQUIRE_KEY:
-			if (wrq->u.data.length != sizeof(BOOLEAN))
-				 Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&IEEE8021x_required_keys, wrq->u.data.pointer, wrq->u.data.length);
-				pAdapter->StaCfg.IEEE8021x_required_keys = IEEE8021x_required_keys;
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_SET_IEEE8021X_REQUIRE_KEY (%d)\n", IEEE8021x_required_keys));
-			}
-			break;
-        case OID_802_11_PMKID:
-	        pPmkId = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-
-	        if(pPmkId == NULL) {
-                Status = -ENOMEM;
-                break;
-            }
-            Status = copy_from_user(pPmkId, wrq->u.data.pointer, wrq->u.data.length);
-
-	        // check the PMKID information
-	        if (pPmkId->BSSIDInfoCount == 0)
-                NdisZeroMemory(pAdapter->StaCfg.SavedPMK, sizeof(BSSID_INFO)*PMKID_NO);
-	        else
-	        {
-		        PBSSID_INFO	pBssIdInfo;
-		        UINT		BssIdx;
-		        UINT		CachedIdx;
-
-		        for (BssIdx = 0; BssIdx < pPmkId->BSSIDInfoCount; BssIdx++)
-		        {
-			        // point to the indexed BSSID_INFO structure
-			        pBssIdInfo = (PBSSID_INFO) ((PUCHAR) pPmkId + 2 * sizeof(UINT) + BssIdx * sizeof(BSSID_INFO));
-			        // Find the entry in the saved data base.
-			        for (CachedIdx = 0; CachedIdx < pAdapter->StaCfg.SavedPMKNum; CachedIdx++)
-			        {
-				        // compare the BSSID
-				        if (NdisEqualMemory(pBssIdInfo->BSSID, pAdapter->StaCfg.SavedPMK[CachedIdx].BSSID, sizeof(NDIS_802_11_MAC_ADDRESS)))
-					        break;
-			        }
-
-			        // Found, replace it
-			        if (CachedIdx < PMKID_NO)
-			        {
-				        DBGPRINT(RT_DEBUG_OFF, ("Update OID_802_11_PMKID, idx = %d\n", CachedIdx));
-				        NdisMoveMemory(&pAdapter->StaCfg.SavedPMK[CachedIdx], pBssIdInfo, sizeof(BSSID_INFO));
-				        pAdapter->StaCfg.SavedPMKNum++;
-			        }
-			        // Not found, replace the last one
-			        else
-			        {
-				        // Randomly replace one
-				        CachedIdx = (pBssIdInfo->BSSID[5] % PMKID_NO);
-				        DBGPRINT(RT_DEBUG_OFF, ("Update OID_802_11_PMKID, idx = %d\n", CachedIdx));
-				        NdisMoveMemory(&pAdapter->StaCfg.SavedPMK[CachedIdx], pBssIdInfo, sizeof(BSSID_INFO));
-			        }
-		        }
-			}
-			if(pPmkId)
-				kfree(pPmkId);
-	        break;
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-
-
-#ifdef SNMP_SUPPORT
-		case OID_802_11_SHORTRETRYLIMIT:
-			if (wrq->u.data.length != sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&ShortRetryLimit, wrq->u.data.pointer, wrq->u.data.length);
-				RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
-				tx_rty_cfg.field.ShortRtyLimit = ShortRetryLimit;
-				RTMP_IO_WRITE32(pAdapter, TX_RTY_CFG, tx_rty_cfg.word);
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_SHORTRETRYLIMIT (tx_rty_cfg.field.ShortRetryLimit=%d, ShortRetryLimit=%ld)\n", tx_rty_cfg.field.ShortRtyLimit, ShortRetryLimit));
-			}
-			break;
-
-		case OID_802_11_LONGRETRYLIMIT:
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_LONGRETRYLIMIT \n"));
-			if (wrq->u.data.length != sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&LongRetryLimit, wrq->u.data.pointer, wrq->u.data.length);
-				RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
-				tx_rty_cfg.field.LongRtyLimit = LongRetryLimit;
-				RTMP_IO_WRITE32(pAdapter, TX_RTY_CFG, tx_rty_cfg.word);
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_LONGRETRYLIMIT (tx_rty_cfg.field.LongRetryLimit= %d,LongRetryLimit=%ld)\n", tx_rty_cfg.field.LongRtyLimit, LongRetryLimit));
-			}
-			break;
-
-		case OID_802_11_WEPDEFAULTKEYVALUE:
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_WEPDEFAULTKEYVALUE\n"));
-			pKey = kmalloc(wrq->u.data.length, GFP_KERNEL);
-			Status = copy_from_user(pKey, wrq->u.data.pointer, wrq->u.data.length);
-			//pKey = &WepKey;
-
-			if ( pKey->Length != wrq->u.data.length)
-			{
-				Status = -EINVAL;
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_WEPDEFAULTKEYVALUE, Failed!!\n"));
-			}
-			KeyIdx = pKey->KeyIndex & 0x0fffffff;
-			DBGPRINT(RT_DEBUG_TRACE,("pKey->KeyIndex =%d, pKey->KeyLength=%d\n", pKey->KeyIndex, pKey->KeyLength));
-
-			// it is a shared key
-			if (KeyIdx > 4)
-				Status = -EINVAL;
-			else
-			{
-				pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen = (UCHAR) pKey->KeyLength;
-				NdisMoveMemory(&pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].Key, &pKey->KeyMaterial, pKey->KeyLength);
-				if (pKey->KeyIndex & 0x80000000)
-				{
-					// Default key for tx (shared key)
-					pAdapter->StaCfg.DefaultKeyId = (UCHAR) KeyIdx;
-				}
-				//RestartAPIsRequired = TRUE;
-			}
-			break;
-
-
-		case OID_802_11_WEPDEFAULTKEYID:
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_WEPDEFAULTKEYID \n"));
-
-			if (wrq->u.data.length != sizeof(UCHAR))
-				Status = -EINVAL;
-			else
-				Status = copy_from_user(&pAdapter->StaCfg.DefaultKeyId, wrq->u.data.pointer, wrq->u.data.length);
-
-			break;
-
-
-		case OID_802_11_CURRENTCHANNEL:
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_CURRENTCHANNEL \n"));
-			if (wrq->u.data.length != sizeof(UCHAR))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&ctmp, wrq->u.data.pointer, wrq->u.data.length);
-				sprintf(&ctmp,"%d", ctmp);
-				Set_Channel_Proc(pAdapter, &ctmp);
-			}
-			break;
-#endif
-
-
-
-        default:
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::unknown IOCTL's subcmd = 0x%08x\n", cmd));
-            Status = -EOPNOTSUPP;
-            break;
-    }
-
-
-    return Status;
-}
-
-INT RTMPQueryInformation(
-    IN  PRTMP_ADAPTER pAdapter,
-    IN  OUT struct ifreq    *rq,
-    IN  INT                 cmd)
-{
-    struct iwreq                        *wrq = (struct iwreq *) rq;
-    NDIS_802_11_BSSID_LIST_EX           *pBssidList = NULL;
-    PNDIS_WLAN_BSSID_EX                 pBss;
-    NDIS_802_11_SSID                    Ssid;
-    NDIS_802_11_CONFIGURATION           *pConfiguration = NULL;
-    RT_802_11_LINK_STATUS               *pLinkStatus = NULL;
-    RT_802_11_STA_CONFIG                *pStaConfig = NULL;
-    NDIS_802_11_STATISTICS              *pStatistics = NULL;
-    NDIS_802_11_RTS_THRESHOLD           RtsThresh;
-    NDIS_802_11_FRAGMENTATION_THRESHOLD FragThresh;
-    NDIS_802_11_POWER_MODE              PowerMode;
-    NDIS_802_11_NETWORK_INFRASTRUCTURE  BssType;
-    RT_802_11_PREAMBLE                  PreamType;
-    NDIS_802_11_AUTHENTICATION_MODE     AuthMode;
-    NDIS_802_11_WEP_STATUS              WepStatus;
-    NDIS_MEDIA_STATE                    MediaState;
-    ULONG                               BssBufSize, ulInfo=0, NetworkTypeList[4], apsd = 0;
-    USHORT                              BssLen = 0;
-    PUCHAR                              pBuf = NULL, pPtr;
-    INT                                 Status = NDIS_STATUS_SUCCESS;
-    UINT                                we_version_compiled;
-    UCHAR                               i, Padding = 0;
-    BOOLEAN                             RadioState;
-	UCHAR	driverVersion[8];
-    OID_SET_HT_PHYMODE			        *pHTPhyMode = NULL;
-
-
-#ifdef SNMP_SUPPORT
-	//for snmp, kathy
-	DefaultKeyIdxValue			*pKeyIdxValue;
-	INT							valueLen;
-	TX_RTY_CFG_STRUC			tx_rty_cfg;
-	ULONG						ShortRetryLimit, LongRetryLimit;
-	UCHAR						tmp[64];
-#endif //SNMP
-
-    switch(cmd)
-    {
-        case RT_OID_DEVICE_NAME:
-            wrq->u.data.length = sizeof(STA_NIC_DEVICE_NAME);
-            Status = copy_to_user(wrq->u.data.pointer, STA_NIC_DEVICE_NAME, wrq->u.data.length);
-            break;
-        case RT_OID_VERSION_INFO:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_VERSION_INFO \n"));
-			wrq->u.data.length = 8*sizeof(UCHAR);
-			sprintf(&driverVersion[0], "%s", STA_DRIVER_VERSION);
-			driverVersion[7] = '\0';
-			if (copy_to_user(wrq->u.data.pointer, &driverVersion, wrq->u.data.length))
-            {
-				Status = -EFAULT;
-            }
-            break;
-#ifdef RALINK_ATE
-		case RT_QUERY_ATE_TXDONE_COUNT:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_QUERY_ATE_TXDONE_COUNT \n"));
-			wrq->u.data.length = sizeof(UINT32);
-			if (copy_to_user(wrq->u.data.pointer, &pAdapter->ate.TxDoneCount, wrq->u.data.length))
-			{
-				Status = -EFAULT;
-			}
-			break;
-#endif // RALINK_ATE //
-        case OID_802_11_BSSID_LIST:
-            if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-            {
-            	/*
-            	 * Still scanning, indicate the caller should try again.
-            	 */
-            	DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_BSSID_LIST (Still scanning)\n"));
-				return -EAGAIN;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_BSSID_LIST (%d BSS returned)\n",pAdapter->ScanTab.BssNr));
-			pAdapter->StaCfg.bScanReqIsFromWebUI = FALSE;
-            // Claculate total buffer size required
-            BssBufSize = sizeof(ULONG);
-
-            for (i = 0; i < pAdapter->ScanTab.BssNr; i++)
-            {
-                // Align pointer to 4 bytes boundary.
-                //Padding = 4 - (pAdapter->ScanTab.BssEntry[i].VarIELen & 0x0003);
-                //if (Padding == 4)
-                //    Padding = 0;
-                BssBufSize += (sizeof(NDIS_WLAN_BSSID_EX) - 1 + sizeof(NDIS_802_11_FIXED_IEs) + pAdapter->ScanTab.BssEntry[i].VarIELen + Padding);
-            }
-
-            // For safety issue, we add 256 bytes just in case
-            BssBufSize += 256;
-            // Allocate the same size as passed from higher layer
-            pBuf = kmalloc(BssBufSize, MEM_ALLOC_FLAG);
-            if(pBuf == NULL)
-            {
-                Status = -ENOMEM;
-                break;
-            }
-            // Init 802_11_BSSID_LIST_EX structure
-            NdisZeroMemory(pBuf, BssBufSize);
-            pBssidList = (PNDIS_802_11_BSSID_LIST_EX) pBuf;
-            pBssidList->NumberOfItems = pAdapter->ScanTab.BssNr;
-
-            // Calculate total buffer length
-            BssLen = 4; // Consist of NumberOfItems
-            // Point to start of NDIS_WLAN_BSSID_EX
-            // pPtr = pBuf + sizeof(ULONG);
-            pPtr = (PUCHAR) &pBssidList->Bssid[0];
-            for (i = 0; i < pAdapter->ScanTab.BssNr; i++)
-            {
-                pBss = (PNDIS_WLAN_BSSID_EX) pPtr;
-                NdisMoveMemory(&pBss->MacAddress, &pAdapter->ScanTab.BssEntry[i].Bssid, MAC_ADDR_LEN);
-                if ((pAdapter->ScanTab.BssEntry[i].Hidden == 1) && (pAdapter->StaCfg.bShowHiddenSSID == FALSE))
-                {
-                    //
-					// We must return this SSID during 4way handshaking, otherwise Aegis will failed to parse WPA infomation
-					// and then failed to send EAPOl farame.
-					//
-					if ((pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA) && (pAdapter->StaCfg.PortSecured != WPA_802_1X_PORT_SECURED))
-					{
-						pBss->Ssid.SsidLength = pAdapter->ScanTab.BssEntry[i].SsidLen;
-						NdisMoveMemory(pBss->Ssid.Ssid, pAdapter->ScanTab.BssEntry[i].Ssid, pAdapter->ScanTab.BssEntry[i].SsidLen);
-					}
-					else
-                    	pBss->Ssid.SsidLength = 0;
-                }
-                else
-                {
-                    pBss->Ssid.SsidLength = pAdapter->ScanTab.BssEntry[i].SsidLen;
-                    NdisMoveMemory(pBss->Ssid.Ssid, pAdapter->ScanTab.BssEntry[i].Ssid, pAdapter->ScanTab.BssEntry[i].SsidLen);
-                }
-                pBss->Privacy = pAdapter->ScanTab.BssEntry[i].Privacy;
-                pBss->Rssi = pAdapter->ScanTab.BssEntry[i].Rssi - pAdapter->BbpRssiToDbmDelta;
-                pBss->NetworkTypeInUse = NetworkTypeInUseSanity(&pAdapter->ScanTab.BssEntry[i]);
-                pBss->Configuration.Length = sizeof(NDIS_802_11_CONFIGURATION);
-                pBss->Configuration.BeaconPeriod = pAdapter->ScanTab.BssEntry[i].BeaconPeriod;
-                pBss->Configuration.ATIMWindow = pAdapter->ScanTab.BssEntry[i].AtimWin;
-
-                MAP_CHANNEL_ID_TO_KHZ(pAdapter->ScanTab.BssEntry[i].Channel, pBss->Configuration.DSConfig);
-
-                if (pAdapter->ScanTab.BssEntry[i].BssType == BSS_INFRA)
-                    pBss->InfrastructureMode = Ndis802_11Infrastructure;
-                else
-                    pBss->InfrastructureMode = Ndis802_11IBSS;
-
-                NdisMoveMemory(pBss->SupportedRates, pAdapter->ScanTab.BssEntry[i].SupRate, pAdapter->ScanTab.BssEntry[i].SupRateLen);
-                NdisMoveMemory(pBss->SupportedRates + pAdapter->ScanTab.BssEntry[i].SupRateLen,
-                               pAdapter->ScanTab.BssEntry[i].ExtRate,
-                               pAdapter->ScanTab.BssEntry[i].ExtRateLen);
-
-                if (pAdapter->ScanTab.BssEntry[i].VarIELen == 0)
-                {
-                    pBss->IELength = sizeof(NDIS_802_11_FIXED_IEs);
-                    NdisMoveMemory(pBss->IEs, &pAdapter->ScanTab.BssEntry[i].FixIEs, sizeof(NDIS_802_11_FIXED_IEs));
-                    pPtr = pPtr + sizeof(NDIS_WLAN_BSSID_EX) - 1 + sizeof(NDIS_802_11_FIXED_IEs);
-                }
-                else
-                {
-                    pBss->IELength = (ULONG)(sizeof(NDIS_802_11_FIXED_IEs) + pAdapter->ScanTab.BssEntry[i].VarIELen);
-                    pPtr = pPtr + sizeof(NDIS_WLAN_BSSID_EX) - 1 + sizeof(NDIS_802_11_FIXED_IEs);
-                    NdisMoveMemory(pBss->IEs, &pAdapter->ScanTab.BssEntry[i].FixIEs, sizeof(NDIS_802_11_FIXED_IEs));
-                    NdisMoveMemory(pBss->IEs + sizeof(NDIS_802_11_FIXED_IEs), pAdapter->ScanTab.BssEntry[i].VarIEs, pAdapter->ScanTab.BssEntry[i].VarIELen);
-                    pPtr += pAdapter->ScanTab.BssEntry[i].VarIELen;
-                }
-                pBss->Length = (ULONG)(sizeof(NDIS_WLAN_BSSID_EX) - 1 + sizeof(NDIS_802_11_FIXED_IEs) + pAdapter->ScanTab.BssEntry[i].VarIELen + Padding);
-
-#if WIRELESS_EXT < 17
-                if ((BssLen + pBss->Length) < wrq->u.data.length)
-                BssLen += pBss->Length;
-                else
-                {
-                    pBssidList->NumberOfItems = i;
-                    break;
-                }
-#else
-                BssLen += pBss->Length;
-#endif
-            }
-
-#if WIRELESS_EXT < 17
-            wrq->u.data.length = BssLen;
-#else
-            if (BssLen > wrq->u.data.length)
-            {
-                kfree(pBssidList);
-                return -E2BIG;
-            }
-            else
-                wrq->u.data.length = BssLen;
-#endif
-            Status = copy_to_user(wrq->u.data.pointer, pBssidList, BssLen);
-            kfree(pBssidList);
-            break;
-        case OID_802_3_CURRENT_ADDRESS:
-            wrq->u.data.length = MAC_ADDR_LEN;
-            Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CurrentAddress, wrq->u.data.length);
-            break;
-        case OID_GEN_MEDIA_CONNECT_STATUS:
-            if (pAdapter->IndicateMediaState == NdisMediaStateConnected)
-                MediaState = NdisMediaStateConnected;
-            else
-                MediaState = NdisMediaStateDisconnected;
-
-            wrq->u.data.length = sizeof(NDIS_MEDIA_STATE);
-            Status = copy_to_user(wrq->u.data.pointer, &MediaState, wrq->u.data.length);
-            break;
-        case OID_802_11_BSSID:
-#ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				Status = NDIS_STATUS_RESOURCES;
-				break;
-			}
-#endif // RALINK_ATE //
-            if (INFRA_ON(pAdapter) || ADHOC_ON(pAdapter))
-            {
-                Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.Bssid, sizeof(NDIS_802_11_MAC_ADDRESS));
-
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_BSSID(=EMPTY)\n"));
-                Status = -ENOTCONN;
-            }
-            break;
-        case OID_802_11_SSID:
-			NdisZeroMemory(&Ssid, sizeof(NDIS_802_11_SSID));
-			NdisZeroMemory(Ssid.Ssid, MAX_LEN_OF_SSID);
-            Ssid.SsidLength = pAdapter->CommonCfg.SsidLen;
-			memcpy(Ssid.Ssid, pAdapter->CommonCfg.Ssid,	Ssid.SsidLength);
-            wrq->u.data.length = sizeof(NDIS_802_11_SSID);
-            Status = copy_to_user(wrq->u.data.pointer, &Ssid, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_SSID (Len=%d, ssid=%s)\n", Ssid.SsidLength,Ssid.Ssid));
-            break;
-        case RT_OID_802_11_QUERY_LINK_STATUS:
-            pLinkStatus = (RT_802_11_LINK_STATUS *) kmalloc(sizeof(RT_802_11_LINK_STATUS), MEM_ALLOC_FLAG);
-            if (pLinkStatus)
-            {
-                pLinkStatus->CurrTxRate = RateIdTo500Kbps[pAdapter->CommonCfg.TxRate];   // unit : 500 kbps
-                pLinkStatus->ChannelQuality = pAdapter->Mlme.ChannelQuality;
-                pLinkStatus->RxByteCount = pAdapter->RalinkCounters.ReceivedByteCount;
-                pLinkStatus->TxByteCount = pAdapter->RalinkCounters.TransmittedByteCount;
-        		pLinkStatus->CentralChannel = pAdapter->CommonCfg.CentralChannel;
-                wrq->u.data.length = sizeof(RT_802_11_LINK_STATUS);
-                Status = copy_to_user(wrq->u.data.pointer, pLinkStatus, wrq->u.data.length);
-                kfree(pLinkStatus);
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_LINK_STATUS\n"));
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_LINK_STATUS(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-        case OID_802_11_CONFIGURATION:
-            pConfiguration = (NDIS_802_11_CONFIGURATION *) kmalloc(sizeof(NDIS_802_11_CONFIGURATION), MEM_ALLOC_FLAG);
-            if (pConfiguration)
-            {
-                pConfiguration->Length = sizeof(NDIS_802_11_CONFIGURATION);
-                pConfiguration->BeaconPeriod = pAdapter->CommonCfg.BeaconPeriod;
-                pConfiguration->ATIMWindow = pAdapter->StaActive.AtimWin;
-                MAP_CHANNEL_ID_TO_KHZ(pAdapter->CommonCfg.Channel, pConfiguration->DSConfig);
-                wrq->u.data.length = sizeof(NDIS_802_11_CONFIGURATION);
-                Status = copy_to_user(wrq->u.data.pointer, pConfiguration, wrq->u.data.length);
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_CONFIGURATION(BeaconPeriod=%ld,AtimW=%ld,Channel=%d) \n",
-                                        pConfiguration->BeaconPeriod, pConfiguration->ATIMWindow, pAdapter->CommonCfg.Channel));
-				kfree(pConfiguration);
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_CONFIGURATION(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-		case RT_OID_802_11_SNR_0:
-			if ((pAdapter->StaCfg.LastSNR0 > 0))
-			{
-				ulInfo = ((0xeb	- pAdapter->StaCfg.LastSNR0) * 3) /	16 ;
-				wrq->u.data.length = sizeof(ulInfo);
-				Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-				DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_SNR_0(0x=%lx)\n", ulInfo));
-			}
-            else
-			    Status = -EFAULT;
-			break;
-		case RT_OID_802_11_SNR_1:
-			if ((pAdapter->Antenna.field.RxPath	> 1) &&
-                (pAdapter->StaCfg.LastSNR1 > 0))
-			{
-				ulInfo = ((0xeb	- pAdapter->StaCfg.LastSNR1) * 3) /	16 ;
-				wrq->u.data.length = sizeof(ulInfo);
-				Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-				DBGPRINT(RT_DEBUG_TRACE,("Query::RT_OID_802_11_SNR_1(0x=%lx)\n",ulInfo));
-			}
-			else
-				Status = -EFAULT;
-            DBGPRINT(RT_DEBUG_TRACE,("Query::RT_OID_802_11_SNR_1(pAdapter->StaCfg.LastSNR1=%d)\n",pAdapter->StaCfg.LastSNR1));
-			break;
-        case OID_802_11_RSSI_TRIGGER:
-            ulInfo = pAdapter->StaCfg.RssiSample.LastRssi0 - pAdapter->BbpRssiToDbmDelta;
-            wrq->u.data.length = sizeof(ulInfo);
-            Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_RSSI_TRIGGER(=%ld)\n", ulInfo));
-            break;
-		case OID_802_11_RSSI:
-        case RT_OID_802_11_RSSI:
-			ulInfo = pAdapter->StaCfg.RssiSample.LastRssi0;
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-			break;
-		case RT_OID_802_11_RSSI_1:
-            ulInfo = pAdapter->StaCfg.RssiSample.LastRssi1;
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-			break;
-        case RT_OID_802_11_RSSI_2:
-            ulInfo = pAdapter->StaCfg.RssiSample.LastRssi2;
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-			break;
-        case OID_802_11_STATISTICS:
-            pStatistics = (NDIS_802_11_STATISTICS *) kmalloc(sizeof(NDIS_802_11_STATISTICS), MEM_ALLOC_FLAG);
-            if (pStatistics)
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_STATISTICS \n"));
-                // add the most up-to-date h/w raw counters into software counters
-			    NICUpdateRawCounters(pAdapter);
-
-                // Sanity check for calculation of sucessful count
-                if (pAdapter->WlanCounters.TransmittedFragmentCount.QuadPart < pAdapter->WlanCounters.RetryCount.QuadPart)
-                    pAdapter->WlanCounters.TransmittedFragmentCount.QuadPart = pAdapter->WlanCounters.RetryCount.QuadPart;
-
-                pStatistics->TransmittedFragmentCount.QuadPart = pAdapter->WlanCounters.TransmittedFragmentCount.QuadPart;
-                pStatistics->MulticastTransmittedFrameCount.QuadPart = pAdapter->WlanCounters.MulticastTransmittedFrameCount.QuadPart;
-                pStatistics->FailedCount.QuadPart = pAdapter->WlanCounters.FailedCount.QuadPart;
-                pStatistics->RetryCount.QuadPart = pAdapter->WlanCounters.RetryCount.QuadPart;
-                pStatistics->MultipleRetryCount.QuadPart = pAdapter->WlanCounters.MultipleRetryCount.QuadPart;
-                pStatistics->RTSSuccessCount.QuadPart = pAdapter->WlanCounters.RTSSuccessCount.QuadPart;
-                pStatistics->RTSFailureCount.QuadPart = pAdapter->WlanCounters.RTSFailureCount.QuadPart;
-                pStatistics->ACKFailureCount.QuadPart = pAdapter->WlanCounters.ACKFailureCount.QuadPart;
-                pStatistics->FrameDuplicateCount.QuadPart = pAdapter->WlanCounters.FrameDuplicateCount.QuadPart;
-                pStatistics->ReceivedFragmentCount.QuadPart = pAdapter->WlanCounters.ReceivedFragmentCount.QuadPart;
-                pStatistics->MulticastReceivedFrameCount.QuadPart = pAdapter->WlanCounters.MulticastReceivedFrameCount.QuadPart;
-#ifdef DBG
-                pStatistics->FCSErrorCount = pAdapter->RalinkCounters.RealFcsErrCount;
-#else
-                pStatistics->FCSErrorCount.QuadPart = pAdapter->WlanCounters.FCSErrorCount.QuadPart;
-                pStatistics->FrameDuplicateCount.u.LowPart = pAdapter->WlanCounters.FrameDuplicateCount.u.LowPart / 100;
-#endif
-                wrq->u.data.length = sizeof(NDIS_802_11_STATISTICS);
-                Status = copy_to_user(wrq->u.data.pointer, pStatistics, wrq->u.data.length);
-                kfree(pStatistics);
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_STATISTICS(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-        case OID_GEN_RCV_OK:
-            ulInfo = pAdapter->Counters8023.GoodReceives;
-            wrq->u.data.length = sizeof(ulInfo);
-            Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-            break;
-        case OID_GEN_RCV_NO_BUFFER:
-            ulInfo = pAdapter->Counters8023.RxNoBuffer;
-            wrq->u.data.length = sizeof(ulInfo);
-            Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-            break;
-        case RT_OID_802_11_PHY_MODE:
-            ulInfo = (ULONG)pAdapter->CommonCfg.PhyMode;
-            wrq->u.data.length = sizeof(ulInfo);
-            Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_PHY_MODE (=%ld)\n", ulInfo));
-            break;
-        case RT_OID_802_11_STA_CONFIG:
-            pStaConfig = (RT_802_11_STA_CONFIG *) kmalloc(sizeof(RT_802_11_STA_CONFIG), MEM_ALLOC_FLAG);
-            if (pStaConfig)
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_STA_CONFIG\n"));
-                pStaConfig->EnableTxBurst = pAdapter->CommonCfg.bEnableTxBurst;
-                pStaConfig->EnableTurboRate = 0;
-                pStaConfig->UseBGProtection = pAdapter->CommonCfg.UseBGProtection;
-                pStaConfig->UseShortSlotTime = pAdapter->CommonCfg.bUseShortSlotTime;
-                //pStaConfig->AdhocMode = pAdapter->StaCfg.AdhocMode;
-                pStaConfig->HwRadioStatus = (pAdapter->StaCfg.bHwRadio == TRUE) ? 1 : 0;
-                pStaConfig->Rsv1 = 0;
-                pStaConfig->SystemErrorBitmap = pAdapter->SystemErrorBitmap;
-                wrq->u.data.length = sizeof(RT_802_11_STA_CONFIG);
-                Status = copy_to_user(wrq->u.data.pointer, pStaConfig, wrq->u.data.length);
-                kfree(pStaConfig);
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_STA_CONFIG(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-        case OID_802_11_RTS_THRESHOLD:
-            RtsThresh = pAdapter->CommonCfg.RtsThreshold;
-            wrq->u.data.length = sizeof(RtsThresh);
-            Status = copy_to_user(wrq->u.data.pointer, &RtsThresh, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_RTS_THRESHOLD(=%ld)\n", RtsThresh));
-            break;
-        case OID_802_11_FRAGMENTATION_THRESHOLD:
-            FragThresh = pAdapter->CommonCfg.FragmentThreshold;
-            if (pAdapter->CommonCfg.bUseZeroToDisableFragment == TRUE)
-                FragThresh = 0;
-            wrq->u.data.length = sizeof(FragThresh);
-            Status = copy_to_user(wrq->u.data.pointer, &FragThresh, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_FRAGMENTATION_THRESHOLD(=%ld)\n", FragThresh));
-            break;
-        case OID_802_11_POWER_MODE:
-            PowerMode = pAdapter->StaCfg.WindowsPowerMode;
-            wrq->u.data.length = sizeof(PowerMode);
-            Status = copy_to_user(wrq->u.data.pointer, &PowerMode, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_POWER_MODE(=%d)\n", PowerMode));
-            break;
-        case RT_OID_802_11_RADIO:
-            RadioState = (BOOLEAN) pAdapter->StaCfg.bSwRadio;
-            wrq->u.data.length = sizeof(RadioState);
-            Status = copy_to_user(wrq->u.data.pointer, &RadioState, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_RADIO (=%d)\n", RadioState));
-            break;
-        case OID_802_11_INFRASTRUCTURE_MODE:
-            if (pAdapter->StaCfg.BssType == BSS_ADHOC)
-                BssType = Ndis802_11IBSS;
-            else if (pAdapter->StaCfg.BssType == BSS_INFRA)
-                BssType = Ndis802_11Infrastructure;
-            else if (pAdapter->StaCfg.BssType == BSS_MONITOR)
-                BssType = Ndis802_11Monitor;
-            else
-                BssType = Ndis802_11AutoUnknown;
-
-            wrq->u.data.length = sizeof(BssType);
-            Status = copy_to_user(wrq->u.data.pointer, &BssType, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_INFRASTRUCTURE_MODE(=%d)\n", BssType));
-            break;
-        case RT_OID_802_11_PREAMBLE:
-            PreamType = pAdapter->CommonCfg.TxPreamble;
-            wrq->u.data.length = sizeof(PreamType);
-            Status = copy_to_user(wrq->u.data.pointer, &PreamType, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_PREAMBLE(=%d)\n", PreamType));
-            break;
-        case OID_802_11_AUTHENTICATION_MODE:
-            AuthMode = pAdapter->StaCfg.AuthMode;
-            wrq->u.data.length = sizeof(AuthMode);
-            Status = copy_to_user(wrq->u.data.pointer, &AuthMode, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_AUTHENTICATION_MODE(=%d)\n", AuthMode));
-            break;
-        case OID_802_11_WEP_STATUS:
-            WepStatus = pAdapter->StaCfg.WepStatus;
-            wrq->u.data.length = sizeof(WepStatus);
-            Status = copy_to_user(wrq->u.data.pointer, &WepStatus, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_WEP_STATUS(=%d)\n", WepStatus));
-            break;
-        case OID_802_11_TX_POWER_LEVEL:
-			wrq->u.data.length = sizeof(ULONG);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.TxPower, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_TX_POWER_LEVEL %x\n",pAdapter->CommonCfg.TxPower));
-			break;
-        case RT_OID_802_11_TX_POWER_LEVEL_1:
-            wrq->u.data.length = sizeof(ULONG);
-            Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.TxPowerPercentage, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_TX_POWER_LEVEL_1 (=%ld)\n", pAdapter->CommonCfg.TxPowerPercentage));
-			break;
-        case OID_802_11_NETWORK_TYPES_SUPPORTED:
-			if ((pAdapter->RfIcType	== RFIC_2850) || (pAdapter->RfIcType ==	RFIC_2750))
-			{
-				NetworkTypeList[0] = 3;                 // NumberOfItems = 3
-				NetworkTypeList[1] = Ndis802_11DS;      // NetworkType[1] = 11b
-				NetworkTypeList[2] = Ndis802_11OFDM24;  // NetworkType[2] = 11g
-				NetworkTypeList[3] = Ndis802_11OFDM5;   // NetworkType[3] = 11a
-                wrq->u.data.length = 16;
-				Status = copy_to_user(wrq->u.data.pointer, &NetworkTypeList[0], wrq->u.data.length);
-			}
-			else
-			{
-				NetworkTypeList[0] = 2;                 // NumberOfItems = 2
-				NetworkTypeList[1] = Ndis802_11DS;      // NetworkType[1] = 11b
-				NetworkTypeList[2] = Ndis802_11OFDM24;  // NetworkType[2] = 11g
-			    wrq->u.data.length = 12;
-				Status = copy_to_user(wrq->u.data.pointer, &NetworkTypeList[0], wrq->u.data.length);
-			}
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_NETWORK_TYPES_SUPPORTED\n"));
-				break;
-	    case OID_802_11_NETWORK_TYPE_IN_USE:
-            wrq->u.data.length = sizeof(ULONG);
-			if (pAdapter->CommonCfg.PhyMode == PHY_11A)
-				ulInfo = Ndis802_11OFDM5;
-			else if ((pAdapter->CommonCfg.PhyMode == PHY_11BG_MIXED) || (pAdapter->CommonCfg.PhyMode == PHY_11G))
-				ulInfo = Ndis802_11OFDM24;
-			else
-				ulInfo = Ndis802_11DS;
-            Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-			break;
-        case RT_OID_802_11_QUERY_LAST_RX_RATE:
-            ulInfo = (ULONG)pAdapter->LastRxRate;
-            wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_LAST_RX_RATE (=%ld)\n", ulInfo));
-			break;
-		case RT_OID_802_11_QUERY_LAST_TX_RATE:
-			//ulInfo = (ULONG)pAdapter->LastTxRate;
-			ulInfo = (ULONG)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.word;
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_LAST_TX_RATE (=%lx)\n", ulInfo));
-			break;
-        case RT_OID_802_11_QUERY_EEPROM_VERSION:
-            wrq->u.data.length = sizeof(ULONG);
-            Status = copy_to_user(wrq->u.data.pointer, &pAdapter->EepromVersion, wrq->u.data.length);
-            break;
-        case RT_OID_802_11_QUERY_FIRMWARE_VERSION:
-            wrq->u.data.length = sizeof(ULONG);
-            Status = copy_to_user(wrq->u.data.pointer, &pAdapter->FirmwareVersion, wrq->u.data.length);
-			break;
-	    case RT_OID_802_11_QUERY_NOISE_LEVEL:
-			wrq->u.data.length = sizeof(UCHAR);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->BbpWriteLatch[66], wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_NOISE_LEVEL (=%d)\n", pAdapter->BbpWriteLatch[66]));
-			break;
-	    case RT_OID_802_11_EXTRA_INFO:
-			wrq->u.data.length = sizeof(ULONG);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->ExtraInfo, wrq->u.data.length);
-	        DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_EXTRA_INFO (=%ld)\n", pAdapter->ExtraInfo));
-	        break;
-	    case RT_OID_WE_VERSION_COMPILED:
-	        wrq->u.data.length = sizeof(UINT);
-	        we_version_compiled = WIRELESS_EXT;
-	        Status = copy_to_user(wrq->u.data.pointer, &we_version_compiled, wrq->u.data.length);
-	        break;
-		case RT_OID_802_11_QUERY_APSD_SETTING:
-			apsd = (pAdapter->CommonCfg.bAPSDCapable | (pAdapter->CommonCfg.bAPSDAC_BE << 1) | (pAdapter->CommonCfg.bAPSDAC_BK << 2)
-				| (pAdapter->CommonCfg.bAPSDAC_VI << 3)	| (pAdapter->CommonCfg.bAPSDAC_VO << 4)	| (pAdapter->CommonCfg.MaxSPLength << 5));
-
-			wrq->u.data.length = sizeof(ULONG);
-			Status = copy_to_user(wrq->u.data.pointer, &apsd, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_APSD_SETTING (=0x%lx,APSDCap=%d,AC_BE=%d,AC_BK=%d,AC_VI=%d,AC_VO=%d,MAXSPLen=%d)\n",
-				apsd,pAdapter->CommonCfg.bAPSDCapable,pAdapter->CommonCfg.bAPSDAC_BE,pAdapter->CommonCfg.bAPSDAC_BK,pAdapter->CommonCfg.bAPSDAC_VI,pAdapter->CommonCfg.bAPSDAC_VO,pAdapter->CommonCfg.MaxSPLength));
-			break;
-		case RT_OID_802_11_QUERY_APSD_PSM:
-			wrq->u.data.length = sizeof(ULONG);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.bAPSDForcePowerSave, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_APSD_PSM (=%d)\n", pAdapter->CommonCfg.bAPSDForcePowerSave));
-			break;
-		case RT_OID_802_11_QUERY_WMM:
-			wrq->u.data.length = sizeof(BOOLEAN);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.bWmmCapable, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_WMM (=%d)\n",	pAdapter->CommonCfg.bWmmCapable));
-			break;
-#ifdef WPA_SUPPLICANT_SUPPORT
-        case RT_OID_NEW_DRIVER:
-            {
-                UCHAR enabled = 1;
-    	        wrq->u.data.length = sizeof(UCHAR);
-    	        Status = copy_to_user(wrq->u.data.pointer, &enabled, wrq->u.data.length);
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_NEW_DRIVER (=%d)\n", enabled));
-            }
-	        break;
-        case RT_OID_WPA_SUPPLICANT_SUPPORT:
-	        wrq->u.data.length = sizeof(UCHAR);
-	        Status = copy_to_user(wrq->u.data.pointer, &pAdapter->StaCfg.WpaSupplicantUP, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_WPA_SUPPLICANT_SUPPORT (=%d)\n", pAdapter->StaCfg.WpaSupplicantUP));
-	        break;
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-        case RT_OID_DRIVER_DEVICE_NAME:
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_DRIVER_DEVICE_NAME \n"));
-			wrq->u.data.length = 16;
-			if (copy_to_user(wrq->u.data.pointer, pAdapter->StaCfg.dev_name, wrq->u.data.length))
-			{
-				Status = -EFAULT;
-			}
-            break;
-        case RT_OID_802_11_QUERY_HT_PHYMODE:
-            pHTPhyMode = (OID_SET_HT_PHYMODE *) kmalloc(sizeof(OID_SET_HT_PHYMODE), MEM_ALLOC_FLAG);
-            if (pHTPhyMode)
-            {
-                pHTPhyMode->PhyMode = pAdapter->CommonCfg.PhyMode;
-    			pHTPhyMode->HtMode = (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE;
-    			pHTPhyMode->BW = (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.BW;
-    			pHTPhyMode->MCS= (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.MCS;
-    			pHTPhyMode->SHORTGI= (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.ShortGI;
-    			pHTPhyMode->STBC= (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.STBC;
-
-    			pHTPhyMode->ExtOffset = ((pAdapter->CommonCfg.CentralChannel < pAdapter->CommonCfg.Channel) ? (EXTCHA_BELOW) : (EXTCHA_ABOVE));
-                wrq->u.data.length = sizeof(OID_SET_HT_PHYMODE);
-                if (copy_to_user(wrq->u.data.pointer, pHTPhyMode, wrq->u.data.length))
-    			{
-    				Status = -EFAULT;
-    			}
-    			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_HT_PHYMODE (PhyMode = %d, MCS =%d, BW = %d, STBC = %d, ExtOffset=%d)\n",
-    				pHTPhyMode->HtMode, pHTPhyMode->MCS, pHTPhyMode->BW, pHTPhyMode->STBC, pHTPhyMode->ExtOffset));
-    			DBGPRINT(RT_DEBUG_TRACE, (" MlmeUpdateTxRates (.word = %x )\n", pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.word));
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_STA_CONFIG(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-        case RT_OID_802_11_COUNTRY_REGION:
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_COUNTRY_REGION \n"));
-			wrq->u.data.length = sizeof(ulInfo);
-            ulInfo = pAdapter->CommonCfg.CountryRegionForABand;
-            ulInfo = (ulInfo << 8)|(pAdapter->CommonCfg.CountryRegion);
-			if (copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length))
-            {
-				Status = -EFAULT;
-            }
-            break;
-        case RT_OID_802_11_QUERY_DAT_HT_PHYMODE:
-            pHTPhyMode = (OID_SET_HT_PHYMODE *) kmalloc(sizeof(OID_SET_HT_PHYMODE), MEM_ALLOC_FLAG);
-            if (pHTPhyMode)
-            {
-                pHTPhyMode->PhyMode = pAdapter->CommonCfg.PhyMode;
-    			pHTPhyMode->HtMode = (UCHAR)pAdapter->CommonCfg.RegTransmitSetting.field.HTMODE;
-    			pHTPhyMode->BW = (UCHAR)pAdapter->CommonCfg.RegTransmitSetting.field.BW;
-    			pHTPhyMode->MCS= (UCHAR)pAdapter->StaCfg.DesiredTransmitSetting.field.MCS;
-    			pHTPhyMode->SHORTGI= (UCHAR)pAdapter->CommonCfg.RegTransmitSetting.field.ShortGI;
-    			pHTPhyMode->STBC= (UCHAR)pAdapter->CommonCfg.RegTransmitSetting.field.STBC;
-
-                wrq->u.data.length = sizeof(OID_SET_HT_PHYMODE);
-                if (copy_to_user(wrq->u.data.pointer, pHTPhyMode, wrq->u.data.length))
-    			{
-    				Status = -EFAULT;
-    			}
-    			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_HT_PHYMODE (PhyMode = %d, MCS =%d, BW = %d, STBC = %d, ExtOffset=%d)\n",
-    				pHTPhyMode->HtMode, pHTPhyMode->MCS, pHTPhyMode->BW, pHTPhyMode->STBC, pHTPhyMode->ExtOffset));
-    			DBGPRINT(RT_DEBUG_TRACE, (" MlmeUpdateTxRates (.word = %x )\n", pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.word));
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_STA_CONFIG(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-        case RT_OID_QUERY_MULTIPLE_CARD_SUPPORT:
-			wrq->u.data.length = sizeof(UCHAR);
-            i = 0;
-#ifdef MULTIPLE_CARD_SUPPORT
-            i = 1;
-#endif // MULTIPLE_CARD_SUPPORT //
-			if (copy_to_user(wrq->u.data.pointer, &i, wrq->u.data.length))
-            {
-				Status = -EFAULT;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_QUERY_MULTIPLE_CARD_SUPPORT(=%d) \n", i));
-            break;
-#ifdef SNMP_SUPPORT
-		case RT_OID_802_11_MAC_ADDRESS:
-            wrq->u.data.length = MAC_ADDR_LEN;
-            Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CurrentAddress, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_MANUFACTUREROUI:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_MANUFACTUREROUI \n"));
-			wrq->u.data.length = ManufacturerOUI_LEN;
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CurrentAddress, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_MANUFACTURERNAME:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_MANUFACTURERNAME \n"));
-			wrq->u.data.length = strlen(ManufacturerNAME);
-			Status = copy_to_user(wrq->u.data.pointer, ManufacturerNAME, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_RESOURCETYPEIDNAME:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_RESOURCETYPEIDNAME \n"));
-			wrq->u.data.length = strlen(ResourceTypeIdName);
-			Status = copy_to_user(wrq->u.data.pointer, ResourceTypeIdName, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_PRIVACYOPTIONIMPLEMENTED:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_PRIVACYOPTIONIMPLEMENTED \n"));
-			ulInfo = 1; // 1 is support wep else 2 is not support.
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_POWERMANAGEMENTMODE:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_POWERMANAGEMENTMODE \n"));
-			if (pAdapter->StaCfg.Psm == PSMP_ACTION)
-				ulInfo = 1; // 1 is power active else 2 is power save.
-			else
-				ulInfo = 2;
-
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-			break;
-
-		case OID_802_11_WEPDEFAULTKEYVALUE:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_WEPDEFAULTKEYVALUE \n"));
-			//KeyIdxValue.KeyIdx = pAd->PortCfg.MBSSID[pAd->IoctlIF].DefaultKeyId;
-			pKeyIdxValue = wrq->u.data.pointer;
-			DBGPRINT(RT_DEBUG_TRACE,("KeyIdxValue.KeyIdx = %d, \n",pKeyIdxValue->KeyIdx));
-			valueLen = pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen;
-			NdisMoveMemory(pKeyIdxValue->Value,
-						   &pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].Key,
-						   valueLen);
-			pKeyIdxValue->Value[valueLen]='\0';
-
-			wrq->u.data.length = sizeof(DefaultKeyIdxValue);
-
-			Status = copy_to_user(wrq->u.data.pointer, pKeyIdxValue, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE,("DefaultKeyId = %d, total len = %d, str len=%d, KeyValue= %02x %02x %02x %02x \n", pAdapter->StaCfg.DefaultKeyId, wrq->u.data.length, pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen,
-			pAdapter->SharedKey[BSS0][0].Key[0],
-			pAdapter->SharedKey[BSS0][1].Key[0],
-			pAdapter->SharedKey[BSS0][2].Key[0],
-			pAdapter->SharedKey[BSS0][3].Key[0]));
-			break;
-
-		case OID_802_11_WEPDEFAULTKEYID:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_WEPDEFAULTKEYID \n"));
-			wrq->u.data.length = sizeof(UCHAR);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->StaCfg.DefaultKeyId, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("DefaultKeyId =%d \n", pAdapter->StaCfg.DefaultKeyId));
-			break;
-
-		case RT_OID_802_11_WEPKEYMAPPINGLENGTH:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_WEPKEYMAPPINGLENGTH \n"));
-			wrq->u.data.length = sizeof(UCHAR);
-			Status = copy_to_user(wrq->u.data.pointer,
-									&pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen,
-									wrq->u.data.length);
-			break;
-
-		case OID_802_11_SHORTRETRYLIMIT:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_SHORTRETRYLIMIT \n"));
-			wrq->u.data.length = sizeof(ULONG);
-			RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
-			ShortRetryLimit = tx_rty_cfg.field.ShortRtyLimit;
-			DBGPRINT(RT_DEBUG_TRACE, ("ShortRetryLimit =%ld,  tx_rty_cfg.field.ShortRetryLimit=%d\n", ShortRetryLimit, tx_rty_cfg.field.ShortRtyLimit));
-			Status = copy_to_user(wrq->u.data.pointer, &ShortRetryLimit, wrq->u.data.length);
-			break;
-
-		case OID_802_11_LONGRETRYLIMIT:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_LONGRETRYLIMIT \n"));
-			wrq->u.data.length = sizeof(ULONG);
-			RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
-			LongRetryLimit = tx_rty_cfg.field.LongRtyLimit;
-			DBGPRINT(RT_DEBUG_TRACE, ("LongRetryLimit =%ld,  tx_rty_cfg.field.LongRtyLimit=%d\n", LongRetryLimit, tx_rty_cfg.field.LongRtyLimit));
-			Status = copy_to_user(wrq->u.data.pointer, &LongRetryLimit, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_PRODUCTID:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_PRODUCTID \n"));
-
-#ifdef RT2870
-			sprintf(tmp, "%04x %04x\n", ((POS_COOKIE)pAdapter->OS_Cookie)->pUsb_Dev->descriptor.idVendor ,((POS_COOKIE)pAdapter->OS_Cookie)->pUsb_Dev->descriptor.idProduct);
-
-#endif // RT2870 //
-			wrq->u.data.length = strlen(tmp);
-			Status = copy_to_user(wrq->u.data.pointer, tmp, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_MANUFACTUREID:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_MANUFACTUREID \n"));
-			wrq->u.data.length = strlen(ManufacturerNAME);
-			Status = copy_to_user(wrq->u.data.pointer, ManufacturerNAME, wrq->u.data.length);
-			break;
-
-		case OID_802_11_CURRENTCHANNEL:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_CURRENTCHANNEL \n"));
-			wrq->u.data.length = sizeof(UCHAR);
-			DBGPRINT(RT_DEBUG_TRACE, ("sizeof UCHAR=%d, channel=%d \n", sizeof(UCHAR), pAdapter->CommonCfg.Channel));
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.Channel, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
-			break;
-#endif //SNMP_SUPPORT
-
-		case OID_802_11_BUILD_CHANNEL_EX:
-			{
-				UCHAR value;
-				DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_BUILD_CHANNEL_EX \n"));
-				wrq->u.data.length = sizeof(UCHAR);
-#ifdef EXT_BUILD_CHANNEL_LIST
-				DBGPRINT(RT_DEBUG_TRACE, ("Support EXT_BUILD_CHANNEL_LIST.\n"));
-				value = 1;
-#else
-				DBGPRINT(RT_DEBUG_TRACE, ("Doesn't support EXT_BUILD_CHANNEL_LIST.\n"));
-				value = 0;
-#endif // EXT_BUILD_CHANNEL_LIST //
-				Status = copy_to_user(wrq->u.data.pointer, &value, 1);
-				DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
-			}
-			break;
-
-		case OID_802_11_GET_CH_LIST:
-			{
-				PRT_CHANNEL_LIST_INFO pChListBuf;
-
-				DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_GET_CH_LIST \n"));
-				if (pAdapter->ChannelListNum == 0)
-				{
-					wrq->u.data.length = 0;
-					break;
-				}
-
-				pChListBuf = (RT_CHANNEL_LIST_INFO *) kmalloc(sizeof(RT_CHANNEL_LIST_INFO), MEM_ALLOC_FLAG);
-				if (pChListBuf == NULL)
-				{
-					wrq->u.data.length = 0;
-					break;
-				}
-
-				pChListBuf->ChannelListNum = pAdapter->ChannelListNum;
-				for (i = 0; i < pChListBuf->ChannelListNum; i++)
-					pChListBuf->ChannelList[i] = pAdapter->ChannelList[i].Channel;
-
-				wrq->u.data.length = sizeof(RT_CHANNEL_LIST_INFO);
-				Status = copy_to_user(wrq->u.data.pointer, pChListBuf, sizeof(RT_CHANNEL_LIST_INFO));
-				DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
-
-				if (pChListBuf)
-					kfree(pChListBuf);
-			}
-			break;
-
-		case OID_802_11_GET_COUNTRY_CODE:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_GET_COUNTRY_CODE \n"));
-			wrq->u.data.length = 2;
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.CountryCode, 2);
-			DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
-			break;
-
-		case OID_802_11_GET_CHANNEL_GEOGRAPHY:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_GET_CHANNEL_GEOGRAPHY \n"));
-			wrq->u.data.length = 1;
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.Geography, 1);
-			DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
-			break;
-
-
-#ifdef QOS_DLS_SUPPORT
-		case RT_OID_802_11_QUERY_DLS:
-			wrq->u.data.length = sizeof(BOOLEAN);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.bDLSCapable, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_DLS(=%d)\n", pAdapter->CommonCfg.bDLSCapable));
-			break;
-
-		case RT_OID_802_11_QUERY_DLS_PARAM:
-			{
-				PRT_802_11_DLS_INFO	pDlsInfo = kmalloc(sizeof(RT_802_11_DLS_INFO), GFP_ATOMIC);
-				if (pDlsInfo == NULL)
-					break;
-
-				for (i=0; i<MAX_NUM_OF_DLS_ENTRY; i++)
-				{
-					RTMPMoveMemory(&pDlsInfo->Entry[i], &pAdapter->StaCfg.DLSEntry[i], sizeof(RT_802_11_DLS_UI));
-				}
-
-				pDlsInfo->num = MAX_NUM_OF_DLS_ENTRY;
-				wrq->u.data.length = sizeof(RT_802_11_DLS_INFO);
-				Status = copy_to_user(wrq->u.data.pointer, pDlsInfo, wrq->u.data.length);
-				DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_DLS_PARAM\n"));
-
-				if (pDlsInfo)
-					kfree(pDlsInfo);
-			}
-			break;
-#endif // QOS_DLS_SUPPORT //
-        default:
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::unknown IOCTL's subcmd = 0x%08x\n", cmd));
-            Status = -EOPNOTSUPP;
-            break;
-    }
-    return Status;
-}
-
-INT rt28xx_sta_ioctl(
-	IN	struct net_device	*net_dev,
-	IN	OUT	struct ifreq	*rq,
-	IN	INT					cmd)
-{
-	POS_COOKIE			pObj;
-	VIRTUAL_ADAPTER		*pVirtualAd = NULL;
-	RTMP_ADAPTER        *pAd = NULL;
-	struct iwreq        *wrq = (struct iwreq *) rq;
-	BOOLEAN				StateMachineTouched = FALSE;
-	INT					Status = NDIS_STATUS_SUCCESS;
-	USHORT				subcmd;
-
-	if (net_dev->priv_flags == INT_MAIN)
-	{
-		pAd = net_dev->priv;
-	}
-	else
-	{
-		pVirtualAd = net_dev->priv;
-		pAd = pVirtualAd->RtmpDev->priv;
-	}
-	pObj = (POS_COOKIE) pAd->OS_Cookie;
-
-	if (pAd == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-    //check if the interface is down
-    if(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-#ifdef CONFIG_APSTA_MIXED_SUPPORT
-	    if (wrq->u.data.pointer == NULL)
-	    {
-		    return Status;
-	    }
-
-	    if (strstr(wrq->u.data.pointer, "OpMode") == NULL)
-#endif // CONFIG_APSTA_MIXED_SUPPORT //
-        {
-            DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-		    return -ENETDOWN;
-        }
-    }
-
-	{	// determine this ioctl command is comming from which interface.
-		pObj->ioctl_if_type = INT_MAIN;
-		pObj->ioctl_if = MAIN_MBSSID;
-	}
-
-	switch(cmd)
-	{
-#ifdef RALINK_ATE
-#ifdef RALINK_28xx_QA
-		case RTPRIV_IOCTL_ATE:
-			{
-				RtmpDoAte(pAd, wrq);
-			}
-			break;
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-        case SIOCGIFHWADDR:
-			DBGPRINT(RT_DEBUG_TRACE, ("IOCTL::SIOCGIFHWADDR\n"));
-			memcpy(wrq->u.name, pAd->CurrentAddress, ETH_ALEN);
-			break;
-		case SIOCGIWNAME:
-        {
-        	char *name=&wrq->u.name[0];
-        	rt_ioctl_giwname(net_dev, NULL, name, NULL);
-			break;
-		}
-		case SIOCGIWESSID:  //Get ESSID
-        {
-        	struct iw_point *essid=&wrq->u.essid;
-        	rt_ioctl_giwessid(net_dev, NULL, essid, essid->pointer);
-			break;
-		}
-		case SIOCSIWESSID:  //Set ESSID
-        {
-        	struct iw_point	*essid=&wrq->u.essid;
-        	rt_ioctl_siwessid(net_dev, NULL, essid, essid->pointer);
-			break;
-		}
-		case SIOCSIWNWID:   // set network id (the cell)
-		case SIOCGIWNWID:   // get network id
-			Status = -EOPNOTSUPP;
-			break;
-		case SIOCSIWFREQ:   //set channel/frequency (Hz)
-        {
-        	struct iw_freq *freq=&wrq->u.freq;
-        	rt_ioctl_siwfreq(net_dev, NULL, freq, NULL);
-			break;
-		}
-		case SIOCGIWFREQ:   // get channel/frequency (Hz)
-        {
-        	struct iw_freq *freq=&wrq->u.freq;
-        	rt_ioctl_giwfreq(net_dev, NULL, freq, NULL);
-			break;
-		}
-		case SIOCSIWNICKN: //set node name/nickname
-        {
-        	struct iw_point *data=&wrq->u.data;
-        	rt_ioctl_siwnickn(net_dev, NULL, data, NULL);
-			break;
-		}
-		case SIOCGIWNICKN: //get node name/nickname
-        {
-        	struct iw_point *data=&wrq->u.data;
-        	rt_ioctl_giwnickn(net_dev, NULL, data, NULL);
-			break;
-		}
-		case SIOCGIWRATE:   //get default bit rate (bps)
-		    rt_ioctl_giwrate(net_dev, NULL, &wrq->u, NULL);
-            break;
-	    case SIOCSIWRATE:  //set default bit rate (bps)
-	        rt_ioctl_siwrate(net_dev, NULL, &wrq->u, NULL);
-            break;
-        case SIOCGIWRTS:  // get RTS/CTS threshold (bytes)
-        {
-        	struct iw_param *rts=&wrq->u.rts;
-        	rt_ioctl_giwrts(net_dev, NULL, rts, NULL);
-			break;
-		}
-        case SIOCSIWRTS:  //set RTS/CTS threshold (bytes)
-        {
-        	struct iw_param *rts=&wrq->u.rts;
-        	rt_ioctl_siwrts(net_dev, NULL, rts, NULL);
-			break;
-		}
-        case SIOCGIWFRAG:  //get fragmentation thr (bytes)
-        {
-        	struct iw_param *frag=&wrq->u.frag;
-        	rt_ioctl_giwfrag(net_dev, NULL, frag, NULL);
-			break;
-		}
-        case SIOCSIWFRAG:  //set fragmentation thr (bytes)
-        {
-        	struct iw_param *frag=&wrq->u.frag;
-        	rt_ioctl_siwfrag(net_dev, NULL, frag, NULL);
-			break;
-		}
-        case SIOCGIWENCODE:  //get encoding token & mode
-        {
-        	struct iw_point *erq=&wrq->u.encoding;
-        	if(erq->pointer)
-        		rt_ioctl_giwencode(net_dev, NULL, erq, erq->pointer);
-			break;
-		}
-        case SIOCSIWENCODE:  //set encoding token & mode
-        {
-        	struct iw_point *erq=&wrq->u.encoding;
-        	if(erq->pointer)
-        		rt_ioctl_siwencode(net_dev, NULL, erq, erq->pointer);
-			break;
-		}
-		case SIOCGIWAP:     //get access point MAC addresses
-        {
-        	struct sockaddr *ap_addr=&wrq->u.ap_addr;
-        	rt_ioctl_giwap(net_dev, NULL, ap_addr, ap_addr->sa_data);
-			break;
-		}
-	    case SIOCSIWAP:  //set access point MAC addresses
-        {
-        	struct sockaddr *ap_addr=&wrq->u.ap_addr;
-        	rt_ioctl_siwap(net_dev, NULL, ap_addr, ap_addr->sa_data);
-			break;
-		}
-		case SIOCGIWMODE:   //get operation mode
-        {
-        	__u32 *mode=&wrq->u.mode;
-        	rt_ioctl_giwmode(net_dev, NULL, mode, NULL);
-			break;
-		}
-		case SIOCSIWMODE:   //set operation mode
-        {
-        	__u32 *mode=&wrq->u.mode;
-        	rt_ioctl_siwmode(net_dev, NULL, mode, NULL);
-			break;
-		}
-		case SIOCGIWSENS:   //get sensitivity (dBm)
-		case SIOCSIWSENS:	//set sensitivity (dBm)
-		case SIOCGIWPOWER:  //get Power Management settings
-		case SIOCSIWPOWER:  //set Power Management settings
-		case SIOCGIWTXPOW:  //get transmit power (dBm)
-		case SIOCSIWTXPOW:  //set transmit power (dBm)
-		case SIOCGIWRANGE:	//Get range of parameters
-		case SIOCGIWRETRY:	//get retry limits and lifetime
-		case SIOCSIWRETRY:	//set retry limits and lifetime
-			Status = -EOPNOTSUPP;
-			break;
-		case RT_PRIV_IOCTL:
-			subcmd = wrq->u.data.flags;
-			if( subcmd & OID_GET_SET_TOGGLE)
-				Status = RTMPSetInformation(pAd, rq, subcmd);
-			else
-				Status = RTMPQueryInformation(pAd, rq, subcmd);
-			break;
-		case SIOCGIWPRIV:
-			if (wrq->u.data.pointer)
-			{
-				if ( access_ok(VERIFY_WRITE, wrq->u.data.pointer, sizeof(privtab)) != TRUE)
-					break;
-				wrq->u.data.length = sizeof(privtab) / sizeof(privtab[0]);
-				if (copy_to_user(wrq->u.data.pointer, privtab, sizeof(privtab)))
-					Status = -EFAULT;
-			}
-			break;
-		case RTPRIV_IOCTL_SET:
-			if(access_ok(VERIFY_READ, wrq->u.data.pointer, wrq->u.data.length) != TRUE)
-				break;
-			rt_ioctl_setparam(net_dev, NULL, NULL, wrq->u.data.pointer);
-			break;
-		case RTPRIV_IOCTL_GSITESURVEY:
-			RTMPIoctlGetSiteSurvey(pAd, wrq);
-		    break;
-#ifdef DBG
-		case RTPRIV_IOCTL_MAC:
-			RTMPIoctlMAC(pAd, wrq);
-			break;
-		case RTPRIV_IOCTL_E2P:
-			RTMPIoctlE2PROM(pAd, wrq);
-			break;
-#endif // DBG //
-        case SIOCETHTOOL:
-                break;
-		default:
-			DBGPRINT(RT_DEBUG_ERROR, ("IOCTL::unknown IOCTL's cmd = 0x%08x\n", cmd));
-			Status = -EOPNOTSUPP;
-			break;
-	}
-
-    if(StateMachineTouched) // Upper layer sent a MLME-related operations
-    	RT28XX_MLME_HANDLER(pAd);
-
-	return Status;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set SSID
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_SSID_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    NDIS_802_11_SSID                    Ssid, *pSsid=NULL;
-    BOOLEAN                             StateMachineTouched = FALSE;
-    int                                 success = TRUE;
-
-    if( strlen(arg) <= MAX_LEN_OF_SSID)
-    {
-        NdisZeroMemory(&Ssid, sizeof(NDIS_802_11_SSID));
-        if (strlen(arg) != 0)
-        {
-            NdisMoveMemory(Ssid.Ssid, arg, strlen(arg));
-            Ssid.SsidLength = strlen(arg);
-        }
-        else   //ANY ssid
-        {
-            Ssid.SsidLength = 0;
-		    memcpy(Ssid.Ssid, "", 0);
-			pAdapter->StaCfg.BssType = BSS_INFRA;
-			pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
-	        pAdapter->StaCfg.WepStatus  = Ndis802_11EncryptionDisabled;
-		}
-        pSsid = &Ssid;
-
-        if (pAdapter->Mlme.CntlMachine.CurrState != CNTL_IDLE)
-        {
-            RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-            DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
-        }
-
-        pAdapter->MlmeAux.CurrReqIsFromNdis = TRUE;
-        pAdapter->StaCfg.bScanReqIsFromWebUI = FALSE;
-		pAdapter->bConfigChanged = TRUE;
-
-        MlmeEnqueue(pAdapter,
-                    MLME_CNTL_STATE_MACHINE,
-                    OID_802_11_SSID,
-                    sizeof(NDIS_802_11_SSID),
-                    (VOID *)pSsid);
-
-        StateMachineTouched = TRUE;
-        DBGPRINT(RT_DEBUG_TRACE, ("Set_SSID_Proc::(Len=%d,Ssid=%s)\n", Ssid.SsidLength, Ssid.Ssid));
-    }
-    else
-        success = FALSE;
-
-    if (StateMachineTouched) // Upper layer sent a MLME-related operations
-    	RT28XX_MLME_HANDLER(pAdapter);
-
-    return success;
-}
-
-#ifdef WMM_SUPPORT
-/*
-    ==========================================================================
-    Description:
-        Set WmmCapable Enable or Disable
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_WmmCapable_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	BOOLEAN	bWmmCapable;
-
-	bWmmCapable = simple_strtol(arg, 0, 10);
-
-	if ((bWmmCapable == 1)
-#ifdef RT2870
-		&& (pAd->NumberOfPipes >= 5)
-#endif // RT2870 //
-		)
-		pAd->CommonCfg.bWmmCapable = TRUE;
-	else if (bWmmCapable == 0)
-		pAd->CommonCfg.bWmmCapable = FALSE;
-	else
-		return FALSE;  //Invalid argument
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_WmmCapable_Proc::(bWmmCapable=%d)\n",
-		pAd->CommonCfg.bWmmCapable));
-
-	return TRUE;
-}
-#endif // WMM_SUPPORT //
-
-/*
-    ==========================================================================
-    Description:
-        Set Network Type(Infrastructure/Adhoc mode)
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_NetworkType_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    UINT32	Value = 0;
-
-    if (strcmp(arg, "Adhoc") == 0)
-	{
-		if (pAdapter->StaCfg.BssType != BSS_ADHOC)
-		{
-			// Config has changed
-			pAdapter->bConfigChanged = TRUE;
-            if (MONITOR_ON(pAdapter))
-            {
-                RTMP_IO_WRITE32(pAdapter, RX_FILTR_CFG, STANORMAL);
-                RTMP_IO_READ32(pAdapter, MAC_SYS_CTRL, &Value);
-				Value &= (~0x80);
-				RTMP_IO_WRITE32(pAdapter, MAC_SYS_CTRL, Value);
-                OPSTATUS_CLEAR_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED);
-                pAdapter->StaCfg.bAutoReconnect = TRUE;
-                LinkDown(pAdapter, FALSE);
-            }
-			if (INFRA_ON(pAdapter))
-			{
-				//BOOLEAN Cancelled;
-				// Set the AutoReconnectSsid to prevent it reconnect to old SSID
-				// Since calling this indicate user don't want to connect to that SSID anymore.
-				pAdapter->MlmeAux.AutoReconnectSsidLen= 32;
-				NdisZeroMemory(pAdapter->MlmeAux.AutoReconnectSsid, pAdapter->MlmeAux.AutoReconnectSsidLen);
-
-				LinkDown(pAdapter, FALSE);
-
-				DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event BB!\n"));
-			}
-		}
-		pAdapter->StaCfg.BssType = BSS_ADHOC;
-        pAdapter->net_dev->type = pAdapter->StaCfg.OriDevType;
-		DBGPRINT(RT_DEBUG_TRACE, ("===>Set_NetworkType_Proc::(AD-HOC)\n"));
-	}
-    else if (strcmp(arg, "Infra") == 0)
-	{
-		if (pAdapter->StaCfg.BssType != BSS_INFRA)
-		{
-			// Config has changed
-			pAdapter->bConfigChanged = TRUE;
-            if (MONITOR_ON(pAdapter))
-            {
-                RTMP_IO_WRITE32(pAdapter, RX_FILTR_CFG, STANORMAL);
-                RTMP_IO_READ32(pAdapter, MAC_SYS_CTRL, &Value);
-				Value &= (~0x80);
-				RTMP_IO_WRITE32(pAdapter, MAC_SYS_CTRL, Value);
-                OPSTATUS_CLEAR_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED);
-                pAdapter->StaCfg.bAutoReconnect = TRUE;
-                LinkDown(pAdapter, FALSE);
-            }
-			if (ADHOC_ON(pAdapter))
-			{
-				// Set the AutoReconnectSsid to prevent it reconnect to old SSID
-				// Since calling this indicate user don't want to connect to that SSID anymore.
-				pAdapter->MlmeAux.AutoReconnectSsidLen= 32;
-				NdisZeroMemory(pAdapter->MlmeAux.AutoReconnectSsid, pAdapter->MlmeAux.AutoReconnectSsidLen);
-
-				LinkDown(pAdapter, FALSE);
-			}
-		}
-		pAdapter->StaCfg.BssType = BSS_INFRA;
-        pAdapter->net_dev->type = pAdapter->StaCfg.OriDevType;
-		DBGPRINT(RT_DEBUG_TRACE, ("===>Set_NetworkType_Proc::(INFRA)\n"));
-
-        pAdapter->StaCfg.BssType = BSS_INFRA;
-	}
-    else if (strcmp(arg, "Monitor") == 0)
-    {
-		UCHAR	bbpValue = 0;
-		BCN_TIME_CFG_STRUC csr;
-		OPSTATUS_CLEAR_FLAG(pAdapter, fOP_STATUS_INFRA_ON);
-        OPSTATUS_CLEAR_FLAG(pAdapter, fOP_STATUS_ADHOC_ON);
-		OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED);
-		// disable all periodic state machine
-		pAdapter->StaCfg.bAutoReconnect = FALSE;
-		// reset all mlme state machine
-		RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-		DBGPRINT(RT_DEBUG_TRACE, ("fOP_STATUS_MEDIA_STATE_CONNECTED \n"));
-        if (pAdapter->CommonCfg.CentralChannel == 0)
-        {
-#ifdef DOT11_N_SUPPORT
-            if (pAdapter->CommonCfg.PhyMode == PHY_11AN_MIXED)
-                pAdapter->CommonCfg.CentralChannel = 36;
-            else
-#endif // DOT11_N_SUPPORT //
-                pAdapter->CommonCfg.CentralChannel = 6;
-        }
-#ifdef DOT11_N_SUPPORT
-        else
-            N_ChannelCheck(pAdapter);
-#endif // DOT11_N_SUPPORT //
-
-#ifdef DOT11_N_SUPPORT
-	if (pAdapter->CommonCfg.PhyMode >= PHY_11ABGN_MIXED &&
-            pAdapter->CommonCfg.RegTransmitSetting.field.BW == BW_40 &&
-            pAdapter->CommonCfg.RegTransmitSetting.field.EXTCHA == EXTCHA_ABOVE)
-		{
-			// 40MHz ,control channel at lower
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R4, &bbpValue);
-			bbpValue &= (~0x18);
-			bbpValue |= 0x10;
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R4, bbpValue);
-			pAdapter->CommonCfg.BBPCurrentBW = BW_40;
-			//  RX : control channel at lower
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R3, &bbpValue);
-			bbpValue &= (~0x20);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R3, bbpValue);
-
-			RTMP_IO_READ32(pAdapter, TX_BAND_CFG, &Value);
-			Value &= 0xfffffffe;
-			RTMP_IO_WRITE32(pAdapter, TX_BAND_CFG, Value);
-			pAdapter->CommonCfg.CentralChannel = pAdapter->CommonCfg.Channel + 2;
-            AsicSwitchChannel(pAdapter, pAdapter->CommonCfg.CentralChannel, FALSE);
-		    AsicLockChannel(pAdapter, pAdapter->CommonCfg.CentralChannel);
-            DBGPRINT(RT_DEBUG_TRACE, ("BW_40 ,control_channel(%d), CentralChannel(%d) \n",
-                                       pAdapter->CommonCfg.Channel,
-                                       pAdapter->CommonCfg.CentralChannel));
-		}
-		else if (pAdapter->CommonCfg.PhyMode >= PHY_11ABGN_MIXED &&
-                 pAdapter->CommonCfg.RegTransmitSetting.field.BW == BW_40 &&
-                 pAdapter->CommonCfg.RegTransmitSetting.field.EXTCHA == EXTCHA_BELOW)
-		{
-			// 40MHz ,control channel at upper
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R4, &bbpValue);
-			bbpValue &= (~0x18);
-			bbpValue |= 0x10;
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R4, bbpValue);
-			pAdapter->CommonCfg.BBPCurrentBW = BW_40;
-			RTMP_IO_READ32(pAdapter, TX_BAND_CFG, &Value);
-			Value |= 0x1;
-			RTMP_IO_WRITE32(pAdapter, TX_BAND_CFG, Value);
-
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R3, &bbpValue);
-			bbpValue |= (0x20);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R3, bbpValue);
-			pAdapter->CommonCfg.CentralChannel = pAdapter->CommonCfg.Channel - 2;
-            AsicSwitchChannel(pAdapter, pAdapter->CommonCfg.CentralChannel, FALSE);
-		    AsicLockChannel(pAdapter, pAdapter->CommonCfg.CentralChannel);
-            DBGPRINT(RT_DEBUG_TRACE, ("BW_40 ,control_channel(%d), CentralChannel(%d) \n",
-                                       pAdapter->CommonCfg.Channel,
-                                       pAdapter->CommonCfg.CentralChannel));
-		}
-		else
-#endif // DOT11_N_SUPPORT //
-		{
-			// 20MHz
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R4, &bbpValue);
-			bbpValue &= (~0x18);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R4, bbpValue);
-			pAdapter->CommonCfg.BBPCurrentBW = BW_20;
-			AsicSwitchChannel(pAdapter, pAdapter->CommonCfg.Channel, FALSE);
-			AsicLockChannel(pAdapter, pAdapter->CommonCfg.Channel);
-			DBGPRINT(RT_DEBUG_TRACE, ("BW_20, Channel(%d)\n", pAdapter->CommonCfg.Channel));
-		}
-		// Enable Rx with promiscuous reception
-		RTMP_IO_WRITE32(pAdapter, RX_FILTR_CFG, 0x3);
-		// ASIC supporsts sniffer function with replacing RSSI with timestamp.
-		//RTMP_IO_READ32(pAdapter, MAC_SYS_CTRL, &Value);
-		//Value |= (0x80);
-		//RTMP_IO_WRITE32(pAdapter, MAC_SYS_CTRL, Value);
-		// disable sync
-		RTMP_IO_READ32(pAdapter, BCN_TIME_CFG, &csr.word);
-		csr.field.bBeaconGen = 0;
-		csr.field.bTBTTEnable = 0;
-		csr.field.TsfSyncMode = 0;
-		RTMP_IO_WRITE32(pAdapter, BCN_TIME_CFG, csr.word);
-
-		pAdapter->StaCfg.BssType = BSS_MONITOR;
-        pAdapter->net_dev->type = ARPHRD_IEEE80211_PRISM; //ARPHRD_IEEE80211; // IEEE80211
-		DBGPRINT(RT_DEBUG_TRACE, ("===>Set_NetworkType_Proc::(MONITOR)\n"));
-    }
-
-    // Reset Ralink supplicant to not use, it will be set to start when UI set PMK key
-    pAdapter->StaCfg.WpaState = SS_NOTUSE;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_NetworkType_Proc::(NetworkType=%d)\n", pAdapter->StaCfg.BssType));
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Authentication mode
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_AuthMode_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    if ((strcmp(arg, "WEPAUTO") == 0) || (strcmp(arg, "wepauto") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeAutoSwitch;
-    else if ((strcmp(arg, "OPEN") == 0) || (strcmp(arg, "open") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
-    else if ((strcmp(arg, "SHARED") == 0) || (strcmp(arg, "shared") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeShared;
-    else if ((strcmp(arg, "WPAPSK") == 0) || (strcmp(arg, "wpapsk") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPAPSK;
-    else if ((strcmp(arg, "WPANONE") == 0) || (strcmp(arg, "wpanone") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPANone;
-    else if ((strcmp(arg, "WPA2PSK") == 0) || (strcmp(arg, "wpa2psk") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2PSK;
-#ifdef WPA_SUPPLICANT_SUPPORT
-    else if ((strcmp(arg, "WPA") == 0) || (strcmp(arg, "wpa") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA;
-    else if ((strcmp(arg, "WPA2") == 0) || (strcmp(arg, "wpa2") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2;
-#endif // WPA_SUPPLICANT_SUPPORT //
-    else
-        return FALSE;
-
-    pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_AuthMode_Proc::(AuthMode=%d)\n", pAdapter->StaCfg.AuthMode));
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Encryption Type
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_EncrypType_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    if ((strcmp(arg, "NONE") == 0) || (strcmp(arg, "none") == 0))
-    {
-        if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-            return TRUE;    // do nothing
-
-        pAdapter->StaCfg.WepStatus     = Ndis802_11WEPDisabled;
-        pAdapter->StaCfg.PairCipher    = Ndis802_11WEPDisabled;
-	    pAdapter->StaCfg.GroupCipher   = Ndis802_11WEPDisabled;
-    }
-    else if ((strcmp(arg, "WEP") == 0) || (strcmp(arg, "wep") == 0))
-    {
-        if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-            return TRUE;    // do nothing
-
-        pAdapter->StaCfg.WepStatus     = Ndis802_11WEPEnabled;
-        pAdapter->StaCfg.PairCipher    = Ndis802_11WEPEnabled;
-	    pAdapter->StaCfg.GroupCipher   = Ndis802_11WEPEnabled;
-    }
-    else if ((strcmp(arg, "TKIP") == 0) || (strcmp(arg, "tkip") == 0))
-    {
-        if (pAdapter->StaCfg.AuthMode < Ndis802_11AuthModeWPA)
-            return TRUE;    // do nothing
-
-        pAdapter->StaCfg.WepStatus     = Ndis802_11Encryption2Enabled;
-        pAdapter->StaCfg.PairCipher    = Ndis802_11Encryption2Enabled;
-	    pAdapter->StaCfg.GroupCipher   = Ndis802_11Encryption2Enabled;
-    }
-    else if ((strcmp(arg, "AES") == 0) || (strcmp(arg, "aes") == 0))
-    {
-        if (pAdapter->StaCfg.AuthMode < Ndis802_11AuthModeWPA)
-            return TRUE;    // do nothing
-
-        pAdapter->StaCfg.WepStatus     = Ndis802_11Encryption3Enabled;
-        pAdapter->StaCfg.PairCipher    = Ndis802_11Encryption3Enabled;
-	    pAdapter->StaCfg.GroupCipher   = Ndis802_11Encryption3Enabled;
-    }
-    else
-        return FALSE;
-
-    pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_EncrypType_Proc::(EncrypType=%d)\n", pAdapter->StaCfg.WepStatus));
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Default Key ID
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_DefaultKeyID_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    ULONG                               KeyIdx;
-
-    KeyIdx = simple_strtol(arg, 0, 10);
-    if((KeyIdx >= 1 ) && (KeyIdx <= 4))
-        pAdapter->StaCfg.DefaultKeyId = (UCHAR) (KeyIdx - 1 );
-    else
-        return FALSE;  //Invalid argument
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_DefaultKeyID_Proc::(DefaultKeyID=%d)\n", pAdapter->StaCfg.DefaultKeyId));
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set WEP KEY1
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_Key1_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    int                                 KeyLen;
-    int                                 i;
-    UCHAR                               CipherAlg=CIPHER_WEP64;
-
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        return TRUE;    // do nothing
-
-    KeyLen = strlen(arg);
-
-    switch (KeyLen)
-    {
-        case 5: //wep 40 Ascii type
-            pAdapter->SharedKey[BSS0][0].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][0].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::(Key1=%s and type=%s)\n", arg, "Ascii"));
-            break;
-        case 10: //wep 40 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][0].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][0].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::(Key1=%s and type=%s)\n", arg, "Hex"));
-            break;
-        case 13: //wep 104 Ascii type
-            pAdapter->SharedKey[BSS0][0].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][0].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::(Key1=%s and type=%s)\n", arg, "Ascii"));
-            break;
-        case 26: //wep 104 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][0].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][0].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::(Key1=%s and type=%s)\n", arg, "Hex"));
-            break;
-        default: //Invalid argument
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::Invalid argument (=%s)\n", arg));
-            return FALSE;
-    }
-
-    pAdapter->SharedKey[BSS0][0].CipherAlg = CipherAlg;
-
-    // Set keys (into ASIC)
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        ;   // not support
-    else    // Old WEP stuff
-    {
-        AsicAddSharedKeyEntry(pAdapter,
-                              0,
-                              0,
-                              pAdapter->SharedKey[BSS0][0].CipherAlg,
-                              pAdapter->SharedKey[BSS0][0].Key,
-                              NULL,
-                              NULL);
-    }
-
-    return TRUE;
-}
-/*
-    ==========================================================================
-
-    Description:
-        Set WEP KEY2
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_Key2_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    int                                 KeyLen;
-    int                                 i;
-    UCHAR                               CipherAlg=CIPHER_WEP64;
-
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        return TRUE;    // do nothing
-
-    KeyLen = strlen(arg);
-
-    switch (KeyLen)
-    {
-        case 5: //wep 40 Ascii type
-            pAdapter->SharedKey[BSS0][1].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][1].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::(Key2=%s and type=%s)\n", arg, "Ascii"));
-            break;
-        case 10: //wep 40 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][1].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][1].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::(Key2=%s and type=%s)\n", arg, "Hex"));
-            break;
-        case 13: //wep 104 Ascii type
-            pAdapter->SharedKey[BSS0][1].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][1].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::(Key2=%s and type=%s)\n", arg, "Ascii"));
-            break;
-        case 26: //wep 104 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][1].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][1].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::(Key2=%s and type=%s)\n", arg, "Hex"));
-            break;
-        default: //Invalid argument
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::Invalid argument (=%s)\n", arg));
-            return FALSE;
-    }
-    pAdapter->SharedKey[BSS0][1].CipherAlg = CipherAlg;
-
-    // Set keys (into ASIC)
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        ;   // not support
-    else    // Old WEP stuff
-    {
-        AsicAddSharedKeyEntry(pAdapter,
-                              0,
-                              1,
-                              pAdapter->SharedKey[BSS0][1].CipherAlg,
-                              pAdapter->SharedKey[BSS0][1].Key,
-                              NULL,
-                              NULL);
-    }
-
-    return TRUE;
-}
-/*
-    ==========================================================================
-    Description:
-        Set WEP KEY3
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_Key3_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    int                                 KeyLen;
-    int                                 i;
-    UCHAR                               CipherAlg=CIPHER_WEP64;
-
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        return TRUE;    // do nothing
-
-    KeyLen = strlen(arg);
-
-    switch (KeyLen)
-    {
-        case 5: //wep 40 Ascii type
-            pAdapter->SharedKey[BSS0][2].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][2].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::(Key3=%s and type=Ascii)\n", arg));
-            break;
-        case 10: //wep 40 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][2].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][2].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::(Key3=%s and type=Hex)\n", arg));
-            break;
-        case 13: //wep 104 Ascii type
-            pAdapter->SharedKey[BSS0][2].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][2].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::(Key3=%s and type=Ascii)\n", arg));
-            break;
-        case 26: //wep 104 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][2].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][2].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::(Key3=%s and type=Hex)\n", arg));
-            break;
-        default: //Invalid argument
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::Invalid argument (=%s)\n", arg));
-            return FALSE;
-    }
-    pAdapter->SharedKey[BSS0][2].CipherAlg = CipherAlg;
-
-    // Set keys (into ASIC)
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        ;   // not support
-    else    // Old WEP stuff
-    {
-        AsicAddSharedKeyEntry(pAdapter,
-                              0,
-                              2,
-                              pAdapter->SharedKey[BSS0][2].CipherAlg,
-                              pAdapter->SharedKey[BSS0][2].Key,
-                              NULL,
-                              NULL);
-    }
-
-    return TRUE;
-}
-/*
-    ==========================================================================
-    Description:
-        Set WEP KEY4
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_Key4_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    int                                 KeyLen;
-    int                                 i;
-    UCHAR                               CipherAlg=CIPHER_WEP64;
-
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        return TRUE;    // do nothing
-
-    KeyLen = strlen(arg);
-
-    switch (KeyLen)
-    {
-        case 5: //wep 40 Ascii type
-            pAdapter->SharedKey[BSS0][3].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][3].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::(Key4=%s and type=%s)\n", arg, "Ascii"));
-            break;
-        case 10: //wep 40 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][3].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][3].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::(Key4=%s and type=%s)\n", arg, "Hex"));
-            break;
-        case 13: //wep 104 Ascii type
-            pAdapter->SharedKey[BSS0][3].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][3].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::(Key4=%s and type=%s)\n", arg, "Ascii"));
-            break;
-        case 26: //wep 104 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][3].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][3].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::(Key4=%s and type=%s)\n", arg, "Hex"));
-            break;
-        default: //Invalid argument
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::Invalid argument (=%s)\n", arg));
-            return FALSE;
-    }
-    pAdapter->SharedKey[BSS0][3].CipherAlg = CipherAlg;
-
-    // Set keys (into ASIC)
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        ;   // not support
-    else    // Old WEP stuff
-    {
-        AsicAddSharedKeyEntry(pAdapter,
-                              0,
-                              3,
-                              pAdapter->SharedKey[BSS0][3].CipherAlg,
-                              pAdapter->SharedKey[BSS0][3].Key,
-                              NULL,
-                              NULL);
-    }
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set WPA PSK key
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_WPAPSK_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    UCHAR                   keyMaterial[40];
-
-    if ((pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPAPSK) &&
-        (pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPA2PSK) &&
-	    (pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPANone)
-		)
-        return TRUE;    // do nothing
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_WPAPSK_Proc::(WPAPSK=%s)\n", arg));
-
-    NdisZeroMemory(keyMaterial, 40);
-
-    if ((strlen(arg) < 8) || (strlen(arg) > 64))
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("Set failed!!(WPAPSK=%s), WPAPSK key-string required 8 ~ 64 characters \n", arg));
-        return FALSE;
-    }
-
-    if (strlen(arg) == 64)
-    {
-        AtoH(arg, keyMaterial, 32);
-        NdisMoveMemory(pAdapter->StaCfg.PMK, keyMaterial, 32);
-
-    }
-    else
-    {
-        PasswordHash((char *)arg, pAdapter->MlmeAux.Ssid, pAdapter->MlmeAux.SsidLen, keyMaterial);
-        NdisMoveMemory(pAdapter->StaCfg.PMK, keyMaterial, 32);
-    }
-
-
-
-    if(pAdapter->StaCfg.BssType == BSS_ADHOC &&
-       pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
-    {
-         pAdapter->StaCfg.WpaState = SS_NOTUSE;
-    }
-    else
-    {
-        // Start STA supplicant state machine
-        pAdapter->StaCfg.WpaState = SS_START;
-    }
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Power Saving mode
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_PSMode_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    if (pAdapter->StaCfg.BssType == BSS_INFRA)
-    {
-        if ((strcmp(arg, "Max_PSP") == 0) ||
-			(strcmp(arg, "max_psp") == 0) ||
-			(strcmp(arg, "MAX_PSP") == 0))
-        {
-            // do NOT turn on PSM bit here, wait until MlmeCheckForPsmChange()
-            // to exclude certain situations.
-            if (pAdapter->StaCfg.bWindowsACCAMEnable == FALSE)
-                pAdapter->StaCfg.WindowsPowerMode = Ndis802_11PowerModeMAX_PSP;
-            pAdapter->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeMAX_PSP;
-            OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_RECEIVE_DTIM);
-            pAdapter->StaCfg.DefaultListenCount = 5;
-
-        }
-        else if ((strcmp(arg, "Fast_PSP") == 0) ||
-				 (strcmp(arg, "fast_psp") == 0) ||
-                 (strcmp(arg, "FAST_PSP") == 0))
-        {
-            // do NOT turn on PSM bit here, wait until MlmeCheckForPsmChange()
-            // to exclude certain situations.
-            OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_RECEIVE_DTIM);
-            if (pAdapter->StaCfg.bWindowsACCAMEnable == FALSE)
-                pAdapter->StaCfg.WindowsPowerMode = Ndis802_11PowerModeFast_PSP;
-            pAdapter->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeFast_PSP;
-            pAdapter->StaCfg.DefaultListenCount = 3;
-        }
-        else if ((strcmp(arg, "Legacy_PSP") == 0) ||
-                 (strcmp(arg, "legacy_psp") == 0) ||
-                 (strcmp(arg, "LEGACY_PSP") == 0))
-        {
-            // do NOT turn on PSM bit here, wait until MlmeCheckForPsmChange()
-            // to exclude certain situations.
-            OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_RECEIVE_DTIM);
-            if (pAdapter->StaCfg.bWindowsACCAMEnable == FALSE)
-                pAdapter->StaCfg.WindowsPowerMode = Ndis802_11PowerModeLegacy_PSP;
-            pAdapter->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeLegacy_PSP;
-            pAdapter->StaCfg.DefaultListenCount = 3;
-        }
-        else
-        {
-            //Default Ndis802_11PowerModeCAM
-            // clear PSM bit immediately
-            MlmeSetPsmBit(pAdapter, PWR_ACTIVE);
-            OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_RECEIVE_DTIM);
-            if (pAdapter->StaCfg.bWindowsACCAMEnable == FALSE)
-                pAdapter->StaCfg.WindowsPowerMode = Ndis802_11PowerModeCAM;
-            pAdapter->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeCAM;
-        }
-
-        DBGPRINT(RT_DEBUG_TRACE, ("Set_PSMode_Proc::(PSMode=%ld)\n", pAdapter->StaCfg.WindowsPowerMode));
-    }
-    else
-        return FALSE;
-
-
-    return TRUE;
-}
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-/*
-    ==========================================================================
-    Description:
-        Set WpaSupport flag.
-    Value:
-        0: Driver ignore wpa_supplicant.
-        1: wpa_supplicant initiates scanning and AP selection.
-        2: driver takes care of scanning, AP selection, and IEEE 802.11 association parameters.
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_Wpa_Support(
-    IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-
-    if ( simple_strtol(arg, 0, 10) == 0)
-        pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_DISABLE;
-    else if ( simple_strtol(arg, 0, 10) == 1)
-        pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_ENABLE;
-    else if ( simple_strtol(arg, 0, 10) == 2)
-        pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_ENABLE_WITH_WEB_UI;
-    else
-        pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_DISABLE;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_Wpa_Support::(WpaSupplicantUP=%d)\n", pAd->StaCfg.WpaSupplicantUP));
-
-    return TRUE;
-}
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef DBG
-/*
-    ==========================================================================
-    Description:
-        Read / Write MAC
-    Arguments:
-        pAdapter                    Pointer to our adapter
-        wrq                         Pointer to the ioctl argument
-
-    Return Value:
-        None
-
-    Note:
-        Usage:
-               1.) iwpriv ra0 mac 0        ==> read MAC where Addr=0x0
-               2.) iwpriv ra0 mac 0=12     ==> write MAC where Addr=0x0, value=12
-    ==========================================================================
-*/
-VOID RTMPIoctlMAC(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq)
-{
-	CHAR				*this_char;
-	CHAR				*value;
-	INT					j = 0, k = 0;
-	CHAR				msg[1024];
-	CHAR				arg[255];
-	ULONG				macAddr = 0;
-	UCHAR				temp[16], temp2[16];
-	UINT32				macValue = 0;
-	INT					Status;
-
-
-	memset(msg, 0x00, 1024);
-	if (wrq->u.data.length > 1) //No parameters.
-	{
-	    Status = copy_from_user(arg, wrq->u.data.pointer, (wrq->u.data.length > 255) ? 255 : wrq->u.data.length);
-		sprintf(msg, "\n");
-
-		//Parsing Read or Write
-	    this_char = arg;
-		if (!*this_char)
-			goto next;
-
-		if ((value = rtstrchr(this_char, '=')) != NULL)
-			*value++ = 0;
-
-		if (!value || !*value)
-		{ //Read
-			// Sanity check
-			if(strlen(this_char) > 4)
-				goto next;
-
-			j = strlen(this_char);
-			while(j-- > 0)
-			{
-				if(this_char[j] > 'f' || this_char[j] < '0')
-					return;
-			}
-
-			// Mac Addr
-			k = j = strlen(this_char);
-			while(j-- > 0)
-			{
-				this_char[4-k+j] = this_char[j];
-			}
-
-			while(k < 4)
-				this_char[3-k++]='0';
-			this_char[4]='\0';
-
-			if(strlen(this_char) == 4)
-			{
-				AtoH(this_char, temp, 2);
-				macAddr = *temp*256 + temp[1];
-				if (macAddr < 0xFFFF)
-				{
-					RTMP_IO_READ32(pAdapter, macAddr, &macValue);
-					DBGPRINT(RT_DEBUG_TRACE, ("MacAddr=%lx, MacValue=%x\n", macAddr, macValue));
-					sprintf(msg+strlen(msg), "[0x%08lX]:%08X  ", macAddr , macValue);
-				}
-				else
-				{//Invalid parametes, so default printk all bbp
-					goto next;
-				}
-			}
-		}
-		else
-		{ //Write
-			memcpy(&temp2, value, strlen(value));
-			temp2[strlen(value)] = '\0';
-
-			// Sanity check
-			if((strlen(this_char) > 4) || strlen(temp2) > 8)
-				goto next;
-
-			j = strlen(this_char);
-			while(j-- > 0)
-			{
-				if(this_char[j] > 'f' || this_char[j] < '0')
-					return;
-			}
-
-			j = strlen(temp2);
-			while(j-- > 0)
-			{
-				if(temp2[j] > 'f' || temp2[j] < '0')
-					return;
-			}
-
-			//MAC Addr
-			k = j = strlen(this_char);
-			while(j-- > 0)
-			{
-				this_char[4-k+j] = this_char[j];
-			}
-
-			while(k < 4)
-				this_char[3-k++]='0';
-			this_char[4]='\0';
-
-			//MAC value
-			k = j = strlen(temp2);
-			while(j-- > 0)
-			{
-				temp2[8-k+j] = temp2[j];
-			}
-
-			while(k < 8)
-				temp2[7-k++]='0';
-			temp2[8]='\0';
-
-			{
-				AtoH(this_char, temp, 2);
-				macAddr = *temp*256 + temp[1];
-
-				AtoH(temp2, temp, 4);
-				macValue = *temp*256*256*256 + temp[1]*256*256 + temp[2]*256 + temp[3];
-
-				// debug mode
-				if (macAddr == (HW_DEBUG_SETTING_BASE + 4))
-				{
-					// 0x2bf4: byte0 non-zero: enable R17 tuning, 0: disable R17 tuning
-                    if (macValue & 0x000000ff)
-                    {
-                        pAdapter->BbpTuning.bEnable = TRUE;
-                        DBGPRINT(RT_DEBUG_TRACE,("turn on R17 tuning\n"));
-                    }
-                    else
-                    {
-                        UCHAR R66;
-                        pAdapter->BbpTuning.bEnable = FALSE;
-                        R66 = 0x26 + GET_LNA_GAIN(pAdapter);
-#ifdef RALINK_ATE
-						if (ATE_ON(pAdapter))
-						{
-							ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R66, (0x26 + GET_LNA_GAIN(pAdapter)));
-						}
-						else
-#endif // RALINK_ATE //
-						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R66, (0x26 + GET_LNA_GAIN(pAdapter)));
-                        DBGPRINT(RT_DEBUG_TRACE,("turn off R17 tuning, restore to 0x%02x\n", R66));
-                    }
-					return;
-				}
-
-				DBGPRINT(RT_DEBUG_TRACE, ("MacAddr=%02lx, MacValue=0x%x\n", macAddr, macValue));
-
-				RTMP_IO_WRITE32(pAdapter, macAddr, macValue);
-				sprintf(msg+strlen(msg), "[0x%08lX]:%08X  ", macAddr, macValue);
-			}
-		}
-	}
-next:
-	if(strlen(msg) == 1)
-		sprintf(msg+strlen(msg), "===>Error command format!");
-
-	// Copy the information into the user buffer
-	wrq->u.data.length = strlen(msg);
-	Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlMAC\n\n"));
-}
-
-/*
-    ==========================================================================
-    Description:
-        Read / Write E2PROM
-    Arguments:
-        pAdapter                    Pointer to our adapter
-        wrq                         Pointer to the ioctl argument
-
-    Return Value:
-        None
-
-    Note:
-        Usage:
-               1.) iwpriv ra0 e2p 0     	==> read E2PROM where Addr=0x0
-               2.) iwpriv ra0 e2p 0=1234    ==> write E2PROM where Addr=0x0, value=1234
-    ==========================================================================
-*/
-VOID RTMPIoctlE2PROM(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq)
-{
-	CHAR				*this_char;
-	CHAR				*value;
-	INT					j = 0, k = 0;
-	CHAR				msg[1024];
-	CHAR				arg[255];
-	USHORT				eepAddr = 0;
-	UCHAR				temp[16], temp2[16];
-	USHORT				eepValue;
-	int					Status;
-
-
-	memset(msg, 0x00, 1024);
-	if (wrq->u.data.length > 1) //No parameters.
-	{
-	    Status = copy_from_user(arg, wrq->u.data.pointer, (wrq->u.data.length > 255) ? 255 : wrq->u.data.length);
-		sprintf(msg, "\n");
-
-	    //Parsing Read or Write
-		this_char = arg;
-
-
-		if (!*this_char)
-			goto next;
-
-		if ((value = rtstrchr(this_char, '=')) != NULL)
-			*value++ = 0;
-
-		if (!value || !*value)
-		{ //Read
-
-			// Sanity check
-			if(strlen(this_char) > 4)
-				goto next;
-
-			j = strlen(this_char);
-			while(j-- > 0)
-			{
-				if(this_char[j] > 'f' || this_char[j] < '0')
-					return;
-			}
-
-			// E2PROM addr
-			k = j = strlen(this_char);
-			while(j-- > 0)
-			{
-				this_char[4-k+j] = this_char[j];
-			}
-
-			while(k < 4)
-				this_char[3-k++]='0';
-			this_char[4]='\0';
-
-			if(strlen(this_char) == 4)
-			{
-				AtoH(this_char, temp, 2);
-				eepAddr = *temp*256 + temp[1];
-				if (eepAddr < 0xFFFF)
-				{
-					RT28xx_EEPROM_READ16(pAdapter, eepAddr, eepValue);
-					sprintf(msg+strlen(msg), "[0x%04X]:0x%04X  ", eepAddr , eepValue);
-				}
-				else
-				{//Invalid parametes, so default printk all bbp
-					goto next;
-				}
-			}
-		}
-		else
-		{ //Write
-			memcpy(&temp2, value, strlen(value));
-			temp2[strlen(value)] = '\0';
-
-			// Sanity check
-			if((strlen(this_char) > 4) || strlen(temp2) > 8)
-				goto next;
-
-			j = strlen(this_char);
-			while(j-- > 0)
-			{
-				if(this_char[j] > 'f' || this_char[j] < '0')
-					return;
-			}
-			j = strlen(temp2);
-			while(j-- > 0)
-			{
-				if(temp2[j] > 'f' || temp2[j] < '0')
-					return;
-			}
-
-			//MAC Addr
-			k = j = strlen(this_char);
-			while(j-- > 0)
-			{
-				this_char[4-k+j] = this_char[j];
-			}
-
-			while(k < 4)
-				this_char[3-k++]='0';
-			this_char[4]='\0';
-
-			//MAC value
-			k = j = strlen(temp2);
-			while(j-- > 0)
-			{
-				temp2[4-k+j] = temp2[j];
-			}
-
-			while(k < 4)
-				temp2[3-k++]='0';
-			temp2[4]='\0';
-
-			AtoH(this_char, temp, 2);
-			eepAddr = *temp*256 + temp[1];
-
-			AtoH(temp2, temp, 2);
-			eepValue = *temp*256 + temp[1];
-
-			RT28xx_EEPROM_WRITE16(pAdapter, eepAddr, eepValue);
-			sprintf(msg+strlen(msg), "[0x%02X]:%02X  ", eepAddr, eepValue);
-		}
-	}
-next:
-	if(strlen(msg) == 1)
-		sprintf(msg+strlen(msg), "===>Error command format!");
-
-
-	// Copy the information into the user buffer
-	wrq->u.data.length = strlen(msg);
-	Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlE2PROM\n"));
-}
-#endif // DBG //
-
-
-
-
-INT Set_TGnWifiTest_Proc(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          arg)
-{
-    if (simple_strtol(arg, 0, 10) == 0)
-        pAd->StaCfg.bTGnWifiTest = FALSE;
-    else
-        pAd->StaCfg.bTGnWifiTest = TRUE;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("IF Set_TGnWifiTest_Proc::(bTGnWifiTest=%d)\n", pAd->StaCfg.bTGnWifiTest));
-	return TRUE;
-}
-
-INT Set_LongRetryLimit_Proc(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	PUCHAR			arg)
-{
-	TX_RTY_CFG_STRUC	tx_rty_cfg;
-	UCHAR				LongRetryLimit = (UCHAR)simple_strtol(arg, 0, 10);
-
-	RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
-	tx_rty_cfg.field.LongRtyLimit = LongRetryLimit;
-	RTMP_IO_WRITE32(pAdapter, TX_RTY_CFG, tx_rty_cfg.word);
-	DBGPRINT(RT_DEBUG_TRACE, ("IF Set_LongRetryLimit_Proc::(tx_rty_cfg=0x%x)\n", tx_rty_cfg.word));
-	return TRUE;
-}
-
-INT Set_ShortRetryLimit_Proc(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	PUCHAR			arg)
-{
-	TX_RTY_CFG_STRUC	tx_rty_cfg;
-	UCHAR				ShortRetryLimit = (UCHAR)simple_strtol(arg, 0, 10);
-
-	RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
-	tx_rty_cfg.field.ShortRtyLimit = ShortRetryLimit;
-	RTMP_IO_WRITE32(pAdapter, TX_RTY_CFG, tx_rty_cfg.word);
-	DBGPRINT(RT_DEBUG_TRACE, ("IF Set_ShortRetryLimit_Proc::(tx_rty_cfg=0x%x)\n", tx_rty_cfg.word));
-	return TRUE;
-}
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-INT Set_Ieee80211dClientMode_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    if (simple_strtol(arg, 0, 10) == 0)
-        pAdapter->StaCfg.IEEE80211dClientMode = Rt802_11_D_None;
-    else if (simple_strtol(arg, 0, 10) == 1)
-        pAdapter->StaCfg.IEEE80211dClientMode = Rt802_11_D_Flexible;
-    else if (simple_strtol(arg, 0, 10) == 2)
-        pAdapter->StaCfg.IEEE80211dClientMode = Rt802_11_D_Strict;
-    else
-        return FALSE;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_Ieee802dMode_Proc::(IEEEE0211dMode=%d)\n", pAdapter->StaCfg.IEEE80211dClientMode));
-    return TRUE;
-}
-#endif // EXT_BUILD_CHANNEL_LIST //
-
-#ifdef CARRIER_DETECTION_SUPPORT
-INT Set_CarrierDetect_Proc(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          arg)
-{
-    if (simple_strtol(arg, 0, 10) == 0)
-        pAd->CommonCfg.CarrierDetect.Enable = FALSE;
-    else
-        pAd->CommonCfg.CarrierDetect.Enable = TRUE;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("IF Set_CarrierDetect_Proc::(CarrierDetect.Enable=%d)\n", pAd->CommonCfg.CarrierDetect.Enable));
-	return TRUE;
-}
-#endif // CARRIER_DETECTION_SUPPORT //
-
-
-INT	Show_Adhoc_MacTable_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PCHAR			extra)
-{
-	INT i;
-
-	sprintf(extra, "\n");
-
-#ifdef DOT11_N_SUPPORT
-	sprintf(extra, "%sHT Operating Mode : %d\n", extra, pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode);
-#endif // DOT11_N_SUPPORT //
-
-	sprintf(extra, "%s\n%-19s%-4s%-4s%-7s%-7s%-7s%-10s%-6s%-6s%-6s%-6s\n", extra,
-			"MAC", "AID", "BSS", "RSSI0", "RSSI1", "RSSI2", "PhMd", "BW", "MCS", "SGI", "STBC");
-
-	for (i=1; i<MAX_LEN_OF_MAC_TABLE; i++)
-	{
-		PMAC_TABLE_ENTRY pEntry = &pAd->MacTab.Content[i];
-
-		if (strlen(extra) > (IW_PRIV_SIZE_MASK - 30))
-		    break;
-		if ((pEntry->ValidAsCLI || pEntry->ValidAsApCli) && (pEntry->Sst == SST_ASSOC))
-		{
-			sprintf(extra, "%s%02X:%02X:%02X:%02X:%02X:%02X  ", extra,
-				pEntry->Addr[0], pEntry->Addr[1], pEntry->Addr[2],
-				pEntry->Addr[3], pEntry->Addr[4], pEntry->Addr[5]);
-			sprintf(extra, "%s%-4d", extra, (int)pEntry->Aid);
-			sprintf(extra, "%s%-4d", extra, (int)pEntry->apidx);
-			sprintf(extra, "%s%-7d", extra, pEntry->RssiSample.AvgRssi0);
-			sprintf(extra, "%s%-7d", extra, pEntry->RssiSample.AvgRssi1);
-			sprintf(extra, "%s%-7d", extra, pEntry->RssiSample.AvgRssi2);
-			sprintf(extra, "%s%-10s", extra, GetPhyMode(pEntry->HTPhyMode.field.MODE));
-			sprintf(extra, "%s%-6s", extra, GetBW(pEntry->HTPhyMode.field.BW));
-			sprintf(extra, "%s%-6d", extra, pEntry->HTPhyMode.field.MCS);
-			sprintf(extra, "%s%-6d", extra, pEntry->HTPhyMode.field.ShortGI);
-			sprintf(extra, "%s%-6d", extra, pEntry->HTPhyMode.field.STBC);
-			sprintf(extra, "%s%-10d, %d, %d%%\n", extra, pEntry->DebugFIFOCount, pEntry->DebugTxCount,
-						(pEntry->DebugTxCount) ? ((pEntry->DebugTxCount-pEntry->DebugFIFOCount)*100/pEntry->DebugTxCount) : 0);
-			sprintf(extra, "%s\n", extra);
-		}
-	}
-
-	return TRUE;
-}
-
-
diff --git a/drivers/staging/rt2870/tmp61 b/drivers/staging/rt2870/tmp61
deleted file mode 100644
index 975e4448437..00000000000
--- a/drivers/staging/rt2870/tmp61
+++ /dev/null
@@ -1,7037 +0,0 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-    sta_ioctl.c
-
-    Abstract:
-    IOCTL related subroutines
-
-    Revision History:
-    Who         When          What
-    --------    ----------    ----------------------------------------------
-    Rory Chen   01-03-2003    created
-	Rory Chen   02-14-2005    modify to support RT61
-*/
-
-#include	"rt_config.h"
-
-#ifdef DBG
-extern ULONG    RTDebugLevel;
-#endif
-
-#define NR_WEP_KEYS 				4
-#define WEP_SMALL_KEY_LEN 			(40/8)
-#define WEP_LARGE_KEY_LEN 			(104/8)
-
-#define GROUP_KEY_NO                4
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
-#define IWE_STREAM_ADD_EVENT(_A, _B, _C, _D, _E)		iwe_stream_add_event(_A, _B, _C, _D, _E)
-#define IWE_STREAM_ADD_POINT(_A, _B, _C, _D, _E)		iwe_stream_add_point(_A, _B, _C, _D, _E)
-#define IWE_STREAM_ADD_VALUE(_A, _B, _C, _D, _E, _F)	iwe_stream_add_value(_A, _B, _C, _D, _E, _F)
-#else
-#define IWE_STREAM_ADD_EVENT(_A, _B, _C, _D, _E)		iwe_stream_add_event(_B, _C, _D, _E)
-#define IWE_STREAM_ADD_POINT(_A, _B, _C, _D, _E)		iwe_stream_add_point(_B, _C, _D, _E)
-#define IWE_STREAM_ADD_VALUE(_A, _B, _C, _D, _E, _F)	iwe_stream_add_value(_B, _C, _D, _E, _F)
-#endif
-
-extern UCHAR    CipherWpa2Template[];
-extern UCHAR    CipherWpaPskTkip[];
-extern UCHAR    CipherWpaPskTkipLen;
-
-typedef struct PACKED _RT_VERSION_INFO{
-    UCHAR       DriverVersionW;
-    UCHAR       DriverVersionX;
-    UCHAR       DriverVersionY;
-    UCHAR       DriverVersionZ;
-    UINT        DriverBuildYear;
-    UINT        DriverBuildMonth;
-    UINT        DriverBuildDay;
-} RT_VERSION_INFO, *PRT_VERSION_INFO;
-
-struct iw_priv_args privtab[] = {
-{ RTPRIV_IOCTL_SET,
-  IW_PRIV_TYPE_CHAR | 1024, 0,
-  "set"},
-
-{ RTPRIV_IOCTL_SHOW, 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
-  ""},
-{ RTPRIV_IOCTL_SHOW, IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
-  ""},
-/* --- sub-ioctls definitions --- */
-    { SHOW_CONN_STATUS,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "connStatus" },
-	{ SHOW_DRVIER_VERION,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "driverVer" },
-    { SHOW_BA_INFO,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "bainfo" },
-	{ SHOW_DESC_INFO,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "descinfo" },
-    { RAIO_OFF,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "radio_off" },
-	{ RAIO_ON,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "radio_on" },
-#ifdef QOS_DLS_SUPPORT
-	{ SHOW_DLS_ENTRY_INFO,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "dlsentryinfo" },
-#endif // QOS_DLS_SUPPORT //
-	{ SHOW_CFG_VALUE,
-	  IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "show" },
-	{ SHOW_ADHOC_ENTRY_INFO,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "adhocEntry" },
-
-/* --- sub-ioctls relations --- */
-
-#ifdef DBG
-{ RTPRIV_IOCTL_BBP,
-  IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
-  "bbp"},
-{ RTPRIV_IOCTL_MAC,
-  IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | 1024,
-  "mac"},
-{ RTPRIV_IOCTL_E2P,
-  IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | 1024,
-  "e2p"},
-#endif  /* DBG */
-
-{ RTPRIV_IOCTL_STATISTICS,
-  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
-  "stat"},
-{ RTPRIV_IOCTL_GSITESURVEY,
-  0, IW_PRIV_TYPE_CHAR | 1024,
-  "get_site_survey"},
-};
-
-INT Set_SSID_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-#ifdef WMM_SUPPORT
-INT	Set_WmmCapable_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-#endif
-
-INT Set_NetworkType_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_AuthMode_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_EncrypType_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_DefaultKeyID_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_Key1_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_Key2_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_Key3_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_Key4_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_WPAPSK_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-
-INT Set_PSMode_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-INT Set_Wpa_Support(
-    IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef DBG
-VOID RTMPIoctlBBP(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq);
-
-VOID RTMPIoctlMAC(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq);
-
-VOID RTMPIoctlE2PROM(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  struct iwreq    *wrq);
-#endif // DBG //
-
-
-NDIS_STATUS RTMPWPANoneAddKeyProc(
-    IN  PRTMP_ADAPTER   pAd,
-    IN	PVOID			pBuf);
-
-INT Set_FragTest_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-#ifdef DOT11_N_SUPPORT
-INT Set_TGnWifiTest_Proc(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          arg);
-#endif // DOT11_N_SUPPORT //
-
-INT Set_LongRetryLimit_Proc(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	PUCHAR			arg);
-
-INT Set_ShortRetryLimit_Proc(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	PUCHAR			arg);
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-INT Set_Ieee80211dClientMode_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-#endif // EXT_BUILD_CHANNEL_LIST //
-
-#ifdef CARRIER_DETECTION_SUPPORT
-INT Set_CarrierDetect_Proc(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          arg);
-#endif // CARRIER_DETECTION_SUPPORT //
-
-INT	Show_Adhoc_MacTable_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PCHAR			extra);
-
-static struct {
-	CHAR *name;
-	INT (*set_proc)(PRTMP_ADAPTER pAdapter, PUCHAR arg);
-} *PRTMP_PRIVATE_SET_PROC, RTMP_PRIVATE_SUPPORT_PROC[] = {
-	{"DriverVersion",				Set_DriverVersion_Proc},
-	{"CountryRegion",				Set_CountryRegion_Proc},
-	{"CountryRegionABand",			Set_CountryRegionABand_Proc},
-	{"SSID",						Set_SSID_Proc},
-	{"WirelessMode",				Set_WirelessMode_Proc},
-	{"TxBurst",					Set_TxBurst_Proc},
-	{"TxPreamble",				Set_TxPreamble_Proc},
-	{"TxPower",					Set_TxPower_Proc},
-	{"Channel",					Set_Channel_Proc},
-	{"BGProtection",				Set_BGProtection_Proc},
-	{"RTSThreshold",				Set_RTSThreshold_Proc},
-	{"FragThreshold",				Set_FragThreshold_Proc},
-#ifdef DOT11_N_SUPPORT
-	{"HtBw",		                Set_HtBw_Proc},
-	{"HtMcs",		                Set_HtMcs_Proc},
-	{"HtGi",		                Set_HtGi_Proc},
-	{"HtOpMode",		            Set_HtOpMode_Proc},
-	{"HtExtcha",		            Set_HtExtcha_Proc},
-	{"HtMpduDensity",		        Set_HtMpduDensity_Proc},
-	{"HtBaWinSize",		        	Set_HtBaWinSize_Proc},
-	{"HtRdg",		        		Set_HtRdg_Proc},
-	{"HtAmsdu",		        		Set_HtAmsdu_Proc},
-	{"HtAutoBa",		        	Set_HtAutoBa_Proc},
-	{"HtBaDecline",					Set_BADecline_Proc},
-	{"HtProtect",		        	Set_HtProtect_Proc},
-	{"HtMimoPs",		        	Set_HtMimoPs_Proc},
-#endif // DOT11_N_SUPPORT //
-
-#ifdef AGGREGATION_SUPPORT
-	{"PktAggregate",				Set_PktAggregate_Proc},
-#endif
-
-#ifdef WMM_SUPPORT
-	{"WmmCapable",					Set_WmmCapable_Proc},
-#endif
-	{"IEEE80211H",					Set_IEEE80211H_Proc},
-    {"NetworkType",                 Set_NetworkType_Proc},
-	{"AuthMode",					Set_AuthMode_Proc},
-	{"EncrypType",					Set_EncrypType_Proc},
-	{"DefaultKeyID",				Set_DefaultKeyID_Proc},
-	{"Key1",						Set_Key1_Proc},
-	{"Key2",						Set_Key2_Proc},
-	{"Key3",						Set_Key3_Proc},
-	{"Key4",						Set_Key4_Proc},
-	{"WPAPSK",						Set_WPAPSK_Proc},
-	{"ResetCounter",				Set_ResetStatCounter_Proc},
-	{"PSMode",                      Set_PSMode_Proc},
-#ifdef DBG
-	{"Debug",						Set_Debug_Proc},
-#endif
-
-#ifdef RALINK_ATE
-	{"ATE",							Set_ATE_Proc},
-	{"ATEDA",						Set_ATE_DA_Proc},
-	{"ATESA",						Set_ATE_SA_Proc},
-	{"ATEBSSID",					Set_ATE_BSSID_Proc},
-	{"ATECHANNEL",					Set_ATE_CHANNEL_Proc},
-	{"ATETXPOW0",					Set_ATE_TX_POWER0_Proc},
-	{"ATETXPOW1",					Set_ATE_TX_POWER1_Proc},
-	{"ATETXANT",					Set_ATE_TX_Antenna_Proc},
-	{"ATERXANT",					Set_ATE_RX_Antenna_Proc},
-	{"ATETXFREQOFFSET",				Set_ATE_TX_FREQOFFSET_Proc},
-	{"ATETXBW",						Set_ATE_TX_BW_Proc},
-	{"ATETXLEN",					Set_ATE_TX_LENGTH_Proc},
-	{"ATETXCNT",					Set_ATE_TX_COUNT_Proc},
-	{"ATETXMCS",					Set_ATE_TX_MCS_Proc},
-	{"ATETXMODE",					Set_ATE_TX_MODE_Proc},
-	{"ATETXGI",						Set_ATE_TX_GI_Proc},
-	{"ATERXFER",					Set_ATE_RX_FER_Proc},
-	{"ATERRF",						Set_ATE_Read_RF_Proc},
-	{"ATEWRF1",						Set_ATE_Write_RF1_Proc},
-	{"ATEWRF2",						Set_ATE_Write_RF2_Proc},
-	{"ATEWRF3",						Set_ATE_Write_RF3_Proc},
-	{"ATEWRF4",						Set_ATE_Write_RF4_Proc},
-	{"ATELDE2P",				    Set_ATE_Load_E2P_Proc},
-	{"ATERE2P",						Set_ATE_Read_E2P_Proc},
-	{"ATESHOW",						Set_ATE_Show_Proc},
-	{"ATEHELP",						Set_ATE_Help_Proc},
-
-#ifdef RALINK_28xx_QA
-	{"TxStop",						Set_TxStop_Proc},
-	{"RxStop",						Set_RxStop_Proc},
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-    {"WpaSupport",                  Set_Wpa_Support},
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-
-
-	{"FixedTxMode",                 Set_FixedTxMode_Proc},
-#ifdef CONFIG_APSTA_MIXED_SUPPORT
-	{"OpMode",						Set_OpMode_Proc},
-#endif // CONFIG_APSTA_MIXED_SUPPORT //
-#ifdef DOT11_N_SUPPORT
-    {"TGnWifiTest",                 Set_TGnWifiTest_Proc},
-    {"ForceGF",		        		Set_ForceGF_Proc},
-#endif // DOT11_N_SUPPORT //
-#ifdef QOS_DLS_SUPPORT
-	{"DlsAddEntry",					Set_DlsAddEntry_Proc},
-	{"DlsTearDownEntry",			Set_DlsTearDownEntry_Proc},
-#endif // QOS_DLS_SUPPORT //
-	{"LongRetry",	        		Set_LongRetryLimit_Proc},
-	{"ShortRetry",	        		Set_ShortRetryLimit_Proc},
-#ifdef EXT_BUILD_CHANNEL_LIST
-	{"11dClientMode",				Set_Ieee80211dClientMode_Proc},
-#endif // EXT_BUILD_CHANNEL_LIST //
-#ifdef CARRIER_DETECTION_SUPPORT
-	{"CarrierDetect",				Set_CarrierDetect_Proc},
-#endif // CARRIER_DETECTION_SUPPORT //
-
-	{NULL,}
-};
-
-
-VOID RTMPAddKey(
-	IN	PRTMP_ADAPTER	    pAd,
-	IN	PNDIS_802_11_KEY    pKey)
-{
-	ULONG				KeyIdx;
-	MAC_TABLE_ENTRY  	*pEntry;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("RTMPAddKey ------>\n"));
-
-	if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-	{
-		if (pKey->KeyIndex & 0x80000000)
-		{
-		    if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
-            {
-                NdisZeroMemory(pAd->StaCfg.PMK, 32);
-                NdisMoveMemory(pAd->StaCfg.PMK, pKey->KeyMaterial, pKey->KeyLength);
-                goto end;
-            }
-		    // Update PTK
-		    NdisZeroMemory(&pAd->SharedKey[BSS0][0], sizeof(CIPHER_KEY));
-            pAd->SharedKey[BSS0][0].KeyLen = LEN_TKIP_EK;
-            NdisMoveMemory(pAd->SharedKey[BSS0][0].Key, pKey->KeyMaterial, LEN_TKIP_EK);
-#ifdef WPA_SUPPLICANT_SUPPORT
-            if (pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled)
-            {
-                NdisMoveMemory(pAd->SharedKey[BSS0][0].RxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK);
-                NdisMoveMemory(pAd->SharedKey[BSS0][0].TxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK);
-            }
-            else
-#endif // WPA_SUPPLICANT_SUPPORT //
-            {
-            	NdisMoveMemory(pAd->SharedKey[BSS0][0].TxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK);
-                NdisMoveMemory(pAd->SharedKey[BSS0][0].RxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK);
-            }
-
-            // Decide its ChiperAlg
-        	if (pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled)
-        		pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_TKIP;
-        	else if (pAd->StaCfg.PairCipher == Ndis802_11Encryption3Enabled)
-        		pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_AES;
-        	else
-        		pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_NONE;
-
-            // Update these related information to MAC_TABLE_ENTRY
-        	pEntry = &pAd->MacTab.Content[BSSID_WCID];
-            NdisMoveMemory(pEntry->PairwiseKey.Key, pAd->SharedKey[BSS0][0].Key, LEN_TKIP_EK);
-        	NdisMoveMemory(pEntry->PairwiseKey.RxMic, pAd->SharedKey[BSS0][0].RxMic, LEN_TKIP_RXMICK);
-        	NdisMoveMemory(pEntry->PairwiseKey.TxMic, pAd->SharedKey[BSS0][0].TxMic, LEN_TKIP_TXMICK);
-        	pEntry->PairwiseKey.CipherAlg = pAd->SharedKey[BSS0][0].CipherAlg;
-
-        	// Update pairwise key information to ASIC Shared Key Table
-        	AsicAddSharedKeyEntry(pAd,
-        						  BSS0,
-        						  0,
-        						  pAd->SharedKey[BSS0][0].CipherAlg,
-        						  pAd->SharedKey[BSS0][0].Key,
-        						  pAd->SharedKey[BSS0][0].TxMic,
-        						  pAd->SharedKey[BSS0][0].RxMic);
-
-        	// Update ASIC WCID attribute table and IVEIV table
-        	RTMPAddWcidAttributeEntry(pAd,
-        							  BSS0,
-        							  0,
-        							  pAd->SharedKey[BSS0][0].CipherAlg,
-        							  pEntry);
-
-            if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA2)
-            {
-                // set 802.1x port control
-	            //pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-				STA_PORT_SECURED(pAd);
-
-                // Indicate Connected for GUI
-                pAd->IndicateMediaState = NdisMediaStateConnected;
-            }
-		}
-        else
-        {
-            // Update GTK
-            pAd->StaCfg.DefaultKeyId = (pKey->KeyIndex & 0xFF);
-            NdisZeroMemory(&pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId], sizeof(CIPHER_KEY));
-            pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].KeyLen = LEN_TKIP_EK;
-            NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key, pKey->KeyMaterial, LEN_TKIP_EK);
-#ifdef WPA_SUPPLICANT_SUPPORT
-            if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption2Enabled)
-            {
-                NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].RxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK);
-                NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].TxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK);
-            }
-            else
-#endif // WPA_SUPPLICANT_SUPPORT //
-            {
-            	NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].TxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK);
-                NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].RxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK);
-            }
-
-            // Update Shared Key CipherAlg
-    		pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_NONE;
-    		if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption2Enabled)
-    			pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_TKIP;
-    		else if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled)
-    			pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_AES;
-
-            // Update group key information to ASIC Shared Key Table
-        	AsicAddSharedKeyEntry(pAd,
-        						  BSS0,
-        						  pAd->StaCfg.DefaultKeyId,
-        						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg,
-        						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key,
-        						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].TxMic,
-        						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].RxMic);
-
-        	// Update ASIC WCID attribute table and IVEIV table
-        	RTMPAddWcidAttributeEntry(pAd,
-        							  BSS0,
-        							  pAd->StaCfg.DefaultKeyId,
-        							  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg,
-        							  NULL);
-
-            // set 802.1x port control
-	        //pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-			STA_PORT_SECURED(pAd);
-
-            // Indicate Connected for GUI
-            pAd->IndicateMediaState = NdisMediaStateConnected;
-        }
-	}
-	else	// dynamic WEP from wpa_supplicant
-	{
-		UCHAR	CipherAlg;
-    	PUCHAR	Key;
-
-		if(pKey->KeyLength == 32)
-			goto end;
-
-		KeyIdx = pKey->KeyIndex & 0x0fffffff;
-
-		if (KeyIdx < 4)
-		{
-			// it is a default shared key, for Pairwise key setting
-			if (pKey->KeyIndex & 0x80000000)
-			{
-				pEntry = MacTableLookup(pAd, pKey->BSSID);
-
-				if (pEntry)
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("RTMPAddKey: Set Pair-wise Key\n"));
-
-					// set key material and key length
- 					pEntry->PairwiseKey.KeyLen = (UCHAR)pKey->KeyLength;
-					NdisMoveMemory(pEntry->PairwiseKey.Key, &pKey->KeyMaterial, pKey->KeyLength);
-
-					// set Cipher type
-					if (pKey->KeyLength == 5)
-						pEntry->PairwiseKey.CipherAlg = CIPHER_WEP64;
-					else
-						pEntry->PairwiseKey.CipherAlg = CIPHER_WEP128;
-
-					// Add Pair-wise key to Asic
-					AsicAddPairwiseKeyEntry(
-						pAd,
-						pEntry->Addr,
-						(UCHAR)pEntry->Aid,
-                		&pEntry->PairwiseKey);
-
-					// update WCID attribute table and IVEIV table for this entry
-					RTMPAddWcidAttributeEntry(
-						pAd,
-						BSS0,
-						KeyIdx, // The value may be not zero
-						pEntry->PairwiseKey.CipherAlg,
-						pEntry);
-
-				}
-			}
-			else
-            {
-				// Default key for tx (shared key)
-				pAd->StaCfg.DefaultKeyId = (UCHAR) KeyIdx;
-
-				// set key material and key length
-				pAd->SharedKey[BSS0][KeyIdx].KeyLen = (UCHAR) pKey->KeyLength;
-				NdisMoveMemory(pAd->SharedKey[BSS0][KeyIdx].Key, &pKey->KeyMaterial, pKey->KeyLength);
-
-				// Set Ciper type
-				if (pKey->KeyLength == 5)
-					pAd->SharedKey[BSS0][KeyIdx].CipherAlg = CIPHER_WEP64;
-				else
-					pAd->SharedKey[BSS0][KeyIdx].CipherAlg = CIPHER_WEP128;
-
-    			CipherAlg = pAd->SharedKey[BSS0][KeyIdx].CipherAlg;
-    			Key = pAd->SharedKey[BSS0][KeyIdx].Key;
-
-				// Set Group key material to Asic
-    			AsicAddSharedKeyEntry(pAd, BSS0, KeyIdx, CipherAlg, Key, NULL, NULL);
-
-				// Update WCID attribute table and IVEIV table for this group key table
-				RTMPAddWcidAttributeEntry(pAd, BSS0, KeyIdx, CipherAlg, NULL);
-
-			}
-		}
-	}
-end:
-	return;
-}
-
-char * rtstrchr(const char * s, int c)
-{
-    for(; *s != (char) c; ++s)
-        if (*s == '\0')
-            return NULL;
-    return (char *) s;
-}
-
-/*
-This is required for LinEX2004/kernel2.6.7 to provide iwlist scanning function
-*/
-
-int
-rt_ioctl_giwname(struct net_device *dev,
-		   struct iw_request_info *info,
-		   char *name, char *extra)
-{
-//	PRTMP_ADAPTER pAdapter = (PRTMP_ADAPTER) dev->priv;
-
-#ifdef RT2870
-	strncpy(name, "RT2870 Wireless", IFNAMSIZ);
-#endif // RT2870 //
-	return 0;
-}
-
-int rt_ioctl_siwfreq(struct net_device *dev,
-			struct iw_request_info *info,
-			struct iw_freq *freq, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = (PRTMP_ADAPTER) dev->priv;
-	int 	chan = -1;
-
-    //check if the interface is down
-    if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-        return -ENETDOWN;
-    }
-
-
-	if (freq->e > 1)
-		return -EINVAL;
-
-	if((freq->e == 0) && (freq->m <= 1000))
-		chan = freq->m;	// Setting by channel number
-	else
-		MAP_KHZ_TO_CHANNEL_ID( (freq->m /100) , chan); // Setting by frequency - search the table , like 2.412G, 2.422G,
-
-    if (ChannelSanity(pAdapter, chan) == TRUE)
-    {
-	pAdapter->CommonCfg.Channel = chan;
-	DBGPRINT(RT_DEBUG_ERROR, ("==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x%x] (Channel=%d)\n", SIOCSIWFREQ, pAdapter->CommonCfg.Channel));
-    }
-    else
-        return -EINVAL;
-
-	return 0;
-}
-int rt_ioctl_giwfreq(struct net_device *dev,
-		   struct iw_request_info *info,
-		   struct iw_freq *freq, char *extra)
-{
-    VIRTUAL_ADAPTER *pVirtualAd = NULL;
-	PRTMP_ADAPTER pAdapter = NULL;
-	UCHAR ch;
-	ULONG	m;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->priv;
-	}
-	else
-	{
-		pVirtualAd = dev->priv;
-		if (pVirtualAd && pVirtualAd->RtmpDev)
-			pAdapter = pVirtualAd->RtmpDev->priv;
-	}
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-		ch = pAdapter->CommonCfg.Channel;
-
-	DBGPRINT(RT_DEBUG_TRACE,("==>rt_ioctl_giwfreq  %d\n", ch));
-
-    MAP_CHANNEL_ID_TO_KHZ(ch, m);
-	freq->m = m * 100;
-	freq->e = 1;
-	return 0;
-}
-
-int rt_ioctl_siwmode(struct net_device *dev,
-		   struct iw_request_info *info,
-		   __u32 *mode, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = (PRTMP_ADAPTER) dev->priv;
-
-	//check if the interface is down
-    if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-    	DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-       	return -ENETDOWN;
-    }
-
-	switch (*mode)
-	{
-		case IW_MODE_ADHOC:
-			Set_NetworkType_Proc(pAdapter, "Adhoc");
-			break;
-		case IW_MODE_INFRA:
-			Set_NetworkType_Proc(pAdapter, "Infra");
-			break;
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,4,20))
-        case IW_MODE_MONITOR:
-			Set_NetworkType_Proc(pAdapter, "Monitor");
-			break;
-#endif
-		default:
-			DBGPRINT(RT_DEBUG_TRACE, ("===>rt_ioctl_siwmode::SIOCSIWMODE (unknown %d)\n", *mode));
-			return -EINVAL;
-	}
-
-	// Reset Ralink supplicant to not use, it will be set to start when UI set PMK key
-	pAdapter->StaCfg.WpaState = SS_NOTUSE;
-
-	return 0;
-}
-
-int rt_ioctl_giwmode(struct net_device *dev,
-		   struct iw_request_info *info,
-		   __u32 *mode, char *extra)
-{
-	PRTMP_ADAPTER 	pAdapter = NULL;
-	VIRTUAL_ADAPTER *pVirtualAd = NULL;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->priv;
-	}
-	else
-	{
-		pVirtualAd = dev->priv;
-		if (pVirtualAd && pVirtualAd->RtmpDev)
-			pAdapter = pVirtualAd->RtmpDev->priv;
-	}
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-	if (ADHOC_ON(pAdapter))
-		*mode = IW_MODE_ADHOC;
-    else if (INFRA_ON(pAdapter))
-		*mode = IW_MODE_INFRA;
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,4,20))
-    else if (MONITOR_ON(pAdapter))
-    {
-        *mode = IW_MODE_MONITOR;
-    }
-#endif
-    else
-        *mode = IW_MODE_AUTO;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("==>rt_ioctl_giwmode(mode=%d)\n", *mode));
-	return 0;
-}
-
-int rt_ioctl_siwsens(struct net_device *dev,
-		   struct iw_request_info *info,
-		   char *name, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = (PRTMP_ADAPTER) dev->priv;
-
-	//check if the interface is down
-    	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    	{
-        	DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-        	return -ENETDOWN;
-    	}
-
-	return 0;
-}
-
-int rt_ioctl_giwsens(struct net_device *dev,
-		   struct iw_request_info *info,
-		   char *name, char *extra)
-{
-	return 0;
-}
-
-int rt_ioctl_giwrange(struct net_device *dev,
-		   struct iw_request_info *info,
-		   struct iw_point *data, char *extra)
-{
-	PRTMP_ADAPTER 	pAdapter = NULL;
-	VIRTUAL_ADAPTER *pVirtualAd = NULL;
-	struct iw_range *range = (struct iw_range *) extra;
-	u16 val;
-	int i;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->priv;
-	}
-	else
-	{
-		pVirtualAd = dev->priv;
-		if (pVirtualAd && pVirtualAd->RtmpDev)
-			pAdapter = pVirtualAd->RtmpDev->priv;
-	}
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE ,("===>rt_ioctl_giwrange\n"));
-	data->length = sizeof(struct iw_range);
-	memset(range, 0, sizeof(struct iw_range));
-
-	range->txpower_capa = IW_TXPOW_DBM;
-
-	if (INFRA_ON(pAdapter)||ADHOC_ON(pAdapter))
-	{
-		range->min_pmp = 1 * 1024;
-		range->max_pmp = 65535 * 1024;
-		range->min_pmt = 1 * 1024;
-		range->max_pmt = 1000 * 1024;
-		range->pmp_flags = IW_POWER_PERIOD;
-		range->pmt_flags = IW_POWER_TIMEOUT;
-		range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT |
-			IW_POWER_UNICAST_R | IW_POWER_ALL_R;
-	}
-
-	range->we_version_compiled = WIRELESS_EXT;
-	range->we_version_source = 14;
-
-	range->retry_capa = IW_RETRY_LIMIT;
-	range->retry_flags = IW_RETRY_LIMIT;
-	range->min_retry = 0;
-	range->max_retry = 255;
-
-	range->num_channels =  pAdapter->ChannelListNum;
-
-	val = 0;
-	for (i = 1; i <= range->num_channels; i++)
-	{
-		u32 m;
-		range->freq[val].i = pAdapter->ChannelList[i-1].Channel;
-		MAP_CHANNEL_ID_TO_KHZ(pAdapter->ChannelList[i-1].Channel, m);
-		range->freq[val].m = m * 100; /* HZ */
-
-		range->freq[val].e = 1;
-		val++;
-		if (val == IW_MAX_FREQUENCIES)
-			break;
-	}
-	range->num_frequency = val;
-
-	range->max_qual.qual = 100; /* what is correct max? This was not
-					* documented exactly. At least
-					* 69 has been observed. */
-	range->max_qual.level = 0; /* dB */
-	range->max_qual.noise = 0; /* dB */
-
-	/* What would be suitable values for "average/typical" qual? */
-	range->avg_qual.qual = 20;
-	range->avg_qual.level = -60;
-	range->avg_qual.noise = -95;
-	range->sensitivity = 3;
-
-	range->max_encoding_tokens = NR_WEP_KEYS;
-	range->num_encoding_sizes = 2;
-	range->encoding_size[0] = 5;
-	range->encoding_size[1] = 13;
-
-	range->min_rts = 0;
-	range->max_rts = 2347;
-	range->min_frag = 256;
-	range->max_frag = 2346;
-
-#if WIRELESS_EXT > 17
-	/* IW_ENC_CAPA_* bit field */
-	range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 |
-					IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP;
-#endif
-
-	return 0;
-}
-
-int rt_ioctl_siwap(struct net_device *dev,
-		      struct iw_request_info *info,
-		      struct sockaddr *ap_addr, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = (PRTMP_ADAPTER) dev->priv;
-    NDIS_802_11_MAC_ADDRESS Bssid;
-
-	//check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-       	DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-       	return -ENETDOWN;
-    }
-
-	if (pAdapter->Mlme.CntlMachine.CurrState != CNTL_IDLE)
-    {
-        RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-        DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
-    }
-
-    // tell CNTL state machine to call NdisMSetInformationComplete() after completing
-    // this request, because this request is initiated by NDIS.
-    pAdapter->MlmeAux.CurrReqIsFromNdis = FALSE;
-	// Prevent to connect AP again in STAMlmePeriodicExec
-	pAdapter->MlmeAux.AutoReconnectSsidLen= 32;
-
-    memset(Bssid, 0, MAC_ADDR_LEN);
-    memcpy(Bssid, ap_addr->sa_data, MAC_ADDR_LEN);
-    MlmeEnqueue(pAdapter,
-                MLME_CNTL_STATE_MACHINE,
-                OID_802_11_BSSID,
-                sizeof(NDIS_802_11_MAC_ADDRESS),
-                (VOID *)&Bssid);
-
-    DBGPRINT(RT_DEBUG_TRACE, ("IOCTL::SIOCSIWAP %02x:%02x:%02x:%02x:%02x:%02x\n",
-        Bssid[0], Bssid[1], Bssid[2], Bssid[3], Bssid[4], Bssid[5]));
-
-	return 0;
-}
-
-int rt_ioctl_giwap(struct net_device *dev,
-		      struct iw_request_info *info,
-		      struct sockaddr *ap_addr, char *extra)
-{
-	PRTMP_ADAPTER 	pAdapter = NULL;
-	VIRTUAL_ADAPTER *pVirtualAd = NULL;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->priv;
-	}
-	else
-	{
-		pVirtualAd = dev->priv;
-		if (pVirtualAd && pVirtualAd->RtmpDev)
-			pAdapter = pVirtualAd->RtmpDev->priv;
-	}
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-	if (INFRA_ON(pAdapter) || ADHOC_ON(pAdapter))
-	{
-		ap_addr->sa_family = ARPHRD_ETHER;
-		memcpy(ap_addr->sa_data, &pAdapter->CommonCfg.Bssid, ETH_ALEN);
-	}
-#ifdef WPA_SUPPLICANT_SUPPORT
-    // Add for RT2870
-    else if (pAdapter->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
-    {
-        ap_addr->sa_family = ARPHRD_ETHER;
-        memcpy(ap_addr->sa_data, &pAdapter->MlmeAux.Bssid, ETH_ALEN);
-    }
-#endif // WPA_SUPPLICANT_SUPPORT //
-	else
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("IOCTL::SIOCGIWAP(=EMPTY)\n"));
-		return -ENOTCONN;
-	}
-
-	return 0;
-}
-
-/*
- * Units are in db above the noise floor. That means the
- * rssi values reported in the tx/rx descriptors in the
- * driver are the SNR expressed in db.
- *
- * If you assume that the noise floor is -95, which is an
- * excellent assumption 99.5 % of the time, then you can
- * derive the absolute signal level (i.e. -95 + rssi).
- * There are some other slight factors to take into account
- * depending on whether the rssi measurement is from 11b,
- * 11g, or 11a.   These differences are at most 2db and
- * can be documented.
- *
- * NB: various calculations are based on the orinoco/wavelan
- *     drivers for compatibility
- */
-static void set_quality(PRTMP_ADAPTER pAdapter,
-                        struct iw_quality *iq,
-                        signed char rssi)
-{
-	__u8 ChannelQuality;
-
-	// Normalize Rssi
-	if (rssi >= -50)
-		ChannelQuality = 100;
-	else if (rssi >= -80) // between -50 ~ -80dbm
-		ChannelQuality = (__u8)(24 + ((rssi + 80) * 26)/10);
-	else if (rssi >= -90)   // between -80 ~ -90dbm
-        ChannelQuality = (__u8)((rssi + 90) * 26)/10;
-	else
-		ChannelQuality = 0;
-
-    iq->qual = (__u8)ChannelQuality;
-
-    iq->level = (__u8)(rssi);
-    iq->noise = (pAdapter->BbpWriteLatch[66] > pAdapter->BbpTuning.FalseCcaUpperThreshold) ? ((__u8)pAdapter->BbpTuning.FalseCcaUpperThreshold) : ((__u8) pAdapter->BbpWriteLatch[66]); 	// noise level (dBm)
-    iq->noise += 256 - 143;
-    iq->updated = pAdapter->iw_stats.qual.updated;
-}
-
-int rt_ioctl_iwaplist(struct net_device *dev,
-			struct iw_request_info *info,
-			struct iw_point *data, char *extra)
-{
- 	PRTMP_ADAPTER pAdapter = (PRTMP_ADAPTER) dev->priv;
-
-	struct sockaddr addr[IW_MAX_AP];
-	struct iw_quality qual[IW_MAX_AP];
-	int i;
-
-   	//check if the interface is down
-    if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-       	DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-		data->length = 0;
-		return 0;
-        //return -ENETDOWN;
-	}
-
-	for (i = 0; i <IW_MAX_AP ; i++)
-	{
-		if (i >=  pAdapter->ScanTab.BssNr)
-			break;
-		addr[i].sa_family = ARPHRD_ETHER;
-			memcpy(addr[i].sa_data, &pAdapter->ScanTab.BssEntry[i].Bssid, MAC_ADDR_LEN);
-		set_quality(pAdapter, &qual[i], pAdapter->ScanTab.BssEntry[i].Rssi);
-	}
-	data->length = i;
-	memcpy(extra, &addr, i*sizeof(addr[0]));
-	data->flags = 1;		/* signal quality present (sort of) */
-	memcpy(extra + i*sizeof(addr[0]), &qual, i*sizeof(qual[i]));
-
-	return 0;
-}
-
-#ifdef SIOCGIWSCAN
-int rt_ioctl_siwscan(struct net_device *dev,
-			struct iw_request_info *info,
-			struct iw_point *data, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = (PRTMP_ADAPTER) dev->priv;
-
-	ULONG								Now;
-	int Status = NDIS_STATUS_SUCCESS;
-
-	//check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-		return -ENETDOWN;
-	}
-
-	if (MONITOR_ON(pAdapter))
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("!!! Driver is in Monitor Mode now !!!\n"));
-        return -EINVAL;
-    }
-
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-	if (pAdapter->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE)
-	{
-		pAdapter->StaCfg.WpaSupplicantScanCount++;
-	}
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-    pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE;
-	if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-		return 0;
-	do{
-		Now = jiffies;
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-		if ((pAdapter->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE) &&
-			(pAdapter->StaCfg.WpaSupplicantScanCount > 3))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("!!! WpaSupplicantScanCount > 3\n"));
-			Status = NDIS_STATUS_SUCCESS;
-			break;
-		}
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-		if ((OPSTATUS_TEST_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED)) &&
-			((pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA) ||
-			(pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK)) &&
-			(pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("!!! Link UP, Port Not Secured! ignore this set::OID_802_11_BSSID_LIST_SCAN\n"));
-			Status = NDIS_STATUS_SUCCESS;
-			break;
-		}
-
-		if (pAdapter->Mlme.CntlMachine.CurrState != CNTL_IDLE)
-		{
-			RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-			DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
-		}
-
-		// tell CNTL state machine to call NdisMSetInformationComplete() after completing
-		// this request, because this request is initiated by NDIS.
-		pAdapter->MlmeAux.CurrReqIsFromNdis = FALSE;
-		// Reset allowed scan retries
-		pAdapter->StaCfg.ScanCnt = 0;
-		pAdapter->StaCfg.LastScanTime = Now;
-
-		MlmeEnqueue(pAdapter,
-			MLME_CNTL_STATE_MACHINE,
-			OID_802_11_BSSID_LIST_SCAN,
-			0,
-			NULL);
-
-		Status = NDIS_STATUS_SUCCESS;
-		RT28XX_MLME_HANDLER(pAdapter);
-	}while(0);
-	return 0;
-}
-
-int rt_ioctl_giwscan(struct net_device *dev,
-			struct iw_request_info *info,
-			struct iw_point *data, char *extra)
-{
-
-	PRTMP_ADAPTER pAdapter = (PRTMP_ADAPTER) dev->priv;
-	int i=0;
-	char *current_ev = extra, *previous_ev = extra;
-	char *end_buf;
-	char *current_val, custom[MAX_CUSTOM_LEN] = {0};
-#ifndef IWEVGENIE
-	char idx;
-#endif // IWEVGENIE //
-	struct iw_event iwe;
-
-	if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-    {
-		/*
-		 * Still scanning, indicate the caller should try again.
-		 */
-		return -EAGAIN;
-	}
-
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-	if (pAdapter->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE)
-	{
-		pAdapter->StaCfg.WpaSupplicantScanCount = 0;
-	}
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-	if (pAdapter->ScanTab.BssNr == 0)
-	{
-		data->length = 0;
-		return 0;
-	}
-
-#if WIRELESS_EXT >= 17
-    if (data->length > 0)
-        end_buf = extra + data->length;
-    else
-        end_buf = extra + IW_SCAN_MAX_DATA;
-#else
-    end_buf = extra + IW_SCAN_MAX_DATA;
-#endif
-
-	for (i = 0; i < pAdapter->ScanTab.BssNr; i++)
-	{
-		if (current_ev >= end_buf)
-        {
-#if WIRELESS_EXT >= 17
-            return -E2BIG;
-#else
-			break;
-#endif
-        }
-
-		//MAC address
-		//================================
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = SIOCGIWAP;
-		iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
-				memcpy(iwe.u.ap_addr.sa_data, &pAdapter->ScanTab.BssEntry[i].Bssid, ETH_ALEN);
-
-        previous_ev = current_ev;
-		current_ev = IWE_STREAM_ADD_EVENT(info, current_ev,end_buf, &iwe, IW_EV_ADDR_LEN);
-        if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-            return -E2BIG;
-#else
-			break;
-#endif
-
-		//ESSID
-		//================================
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = SIOCGIWESSID;
-		iwe.u.data.length = pAdapter->ScanTab.BssEntry[i].SsidLen;
-		iwe.u.data.flags = 1;
-
-        previous_ev = current_ev;
-		current_ev = IWE_STREAM_ADD_POINT(info, current_ev,end_buf, &iwe, pAdapter->ScanTab.BssEntry[i].Ssid);
-        if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-            return -E2BIG;
-#else
-			break;
-#endif
-
-		//Network Type
-		//================================
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = SIOCGIWMODE;
-		if (pAdapter->ScanTab.BssEntry[i].BssType == Ndis802_11IBSS)
-		{
-			iwe.u.mode = IW_MODE_ADHOC;
-		}
-		else if (pAdapter->ScanTab.BssEntry[i].BssType == Ndis802_11Infrastructure)
-		{
-			iwe.u.mode = IW_MODE_INFRA;
-		}
-		else
-		{
-			iwe.u.mode = IW_MODE_AUTO;
-		}
-		iwe.len = IW_EV_UINT_LEN;
-
-        previous_ev = current_ev;
-		current_ev = IWE_STREAM_ADD_EVENT(info, current_ev, end_buf, &iwe,  IW_EV_UINT_LEN);
-        if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-            return -E2BIG;
-#else
-			break;
-#endif
-
-		//Channel and Frequency
-		//================================
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = SIOCGIWFREQ;
-		if (INFRA_ON(pAdapter) || ADHOC_ON(pAdapter))
-			iwe.u.freq.m = pAdapter->ScanTab.BssEntry[i].Channel;
-		else
-			iwe.u.freq.m = pAdapter->ScanTab.BssEntry[i].Channel;
-		iwe.u.freq.e = 0;
-		iwe.u.freq.i = 0;
-
-		previous_ev = current_ev;
-		current_ev = IWE_STREAM_ADD_EVENT(info, current_ev,end_buf, &iwe, IW_EV_FREQ_LEN);
-        if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-            return -E2BIG;
-#else
-			break;
-#endif
-
-        //Add quality statistics
-        //================================
-        memset(&iwe, 0, sizeof(iwe));
-    	iwe.cmd = IWEVQUAL;
-    	iwe.u.qual.level = 0;
-    	iwe.u.qual.noise = 0;
-        set_quality(pAdapter, &iwe.u.qual, pAdapter->ScanTab.BssEntry[i].Rssi);
-    	current_ev = IWE_STREAM_ADD_EVENT(info, current_ev, end_buf, &iwe, IW_EV_QUAL_LEN);
-        if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-            return -E2BIG;
-#else
-			break;
-#endif
-
-		//Encyption key
-		//================================
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = SIOCGIWENCODE;
-		if (CAP_IS_PRIVACY_ON (pAdapter->ScanTab.BssEntry[i].CapabilityInfo ))
-			iwe.u.data.flags =IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
-		else
-			iwe.u.data.flags = IW_ENCODE_DISABLED;
-
-        previous_ev = current_ev;
-        current_ev = IWE_STREAM_ADD_POINT(info, current_ev, end_buf,&iwe, (char *)pAdapter->SharedKey[BSS0][(iwe.u.data.flags & IW_ENCODE_INDEX)-1].Key);
-        if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-            return -E2BIG;
-#else
-			break;
-#endif
-
-		//Bit Rate
-		//================================
-		if (pAdapter->ScanTab.BssEntry[i].SupRateLen)
-        {
-            UCHAR tmpRate = pAdapter->ScanTab.BssEntry[i].SupRate[pAdapter->ScanTab.BssEntry[i].SupRateLen-1];
-			memset(&iwe, 0, sizeof(iwe));
-			iwe.cmd = SIOCGIWRATE;
-    		current_val = current_ev + IW_EV_LCP_LEN;
-            if (tmpRate == 0x82)
-                iwe.u.bitrate.value =  1 * 1000000;
-            else if (tmpRate == 0x84)
-                iwe.u.bitrate.value =  2 * 1000000;
-            else if (tmpRate == 0x8B)
-                iwe.u.bitrate.value =  5.5 * 1000000;
-            else if (tmpRate == 0x96)
-                iwe.u.bitrate.value =  11 * 1000000;
-            else
-    		    iwe.u.bitrate.value =  (tmpRate/2) * 1000000;
-
-			iwe.u.bitrate.disabled = 0;
-			current_val = IWE_STREAM_ADD_VALUE(info, current_ev,
-				current_val, end_buf, &iwe,
-    			IW_EV_PARAM_LEN);
-
-        	if((current_val-current_ev)>IW_EV_LCP_LEN)
-            	current_ev = current_val;
-        	else
-#if WIRELESS_EXT >= 17
-                return -E2BIG;
-#else
-			    break;
-#endif
-        }
-
-#ifdef IWEVGENIE
-		//WPA IE
-		if (pAdapter->ScanTab.BssEntry[i].WpaIE.IELen > 0)
-		{
-			memset(&iwe, 0, sizeof(iwe));
-			memset(&custom[0], 0, MAX_CUSTOM_LEN);
-			memcpy(custom, &(pAdapter->ScanTab.BssEntry[i].WpaIE.IE[0]),
-						   pAdapter->ScanTab.BssEntry[i].WpaIE.IELen);
-			iwe.cmd = IWEVGENIE;
-			iwe.u.data.length = pAdapter->ScanTab.BssEntry[i].WpaIE.IELen;
-			current_ev = IWE_STREAM_ADD_POINT(info, current_ev, end_buf, &iwe, custom);
-			if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-                return -E2BIG;
-#else
-			    break;
-#endif
-		}
-
-		//WPA2 IE
-        if (pAdapter->ScanTab.BssEntry[i].RsnIE.IELen > 0)
-        {
-        	memset(&iwe, 0, sizeof(iwe));
-			memset(&custom[0], 0, MAX_CUSTOM_LEN);
-			memcpy(custom, &(pAdapter->ScanTab.BssEntry[i].RsnIE.IE[0]),
-						   pAdapter->ScanTab.BssEntry[i].RsnIE.IELen);
-			iwe.cmd = IWEVGENIE;
-			iwe.u.data.length = pAdapter->ScanTab.BssEntry[i].RsnIE.IELen;
-			current_ev = IWE_STREAM_ADD_POINT(info, current_ev, end_buf, &iwe, custom);
-			if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-                return -E2BIG;
-#else
-			    break;
-#endif
-        }
-#else
-        //WPA IE
-		//================================
-        if (pAdapter->ScanTab.BssEntry[i].WpaIE.IELen > 0)
-        {
-    		NdisZeroMemory(&iwe, sizeof(iwe));
-			memset(&custom[0], 0, MAX_CUSTOM_LEN);
-    		iwe.cmd = IWEVCUSTOM;
-            iwe.u.data.length = (pAdapter->ScanTab.BssEntry[i].WpaIE.IELen * 2) + 7;
-            NdisMoveMemory(custom, "wpa_ie=", 7);
-            for (idx = 0; idx < pAdapter->ScanTab.BssEntry[i].WpaIE.IELen; idx++)
-                sprintf(custom, "%s%02x", custom, pAdapter->ScanTab.BssEntry[i].WpaIE.IE[idx]);
-            previous_ev = current_ev;
-    		current_ev = IWE_STREAM_ADD_POINT(info, current_ev, end_buf, &iwe,  custom);
-            if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-                return -E2BIG;
-#else
-			    break;
-#endif
-        }
-
-        //WPA2 IE
-        if (pAdapter->ScanTab.BssEntry[i].RsnIE.IELen > 0)
-        {
-    		NdisZeroMemory(&iwe, sizeof(iwe));
-			memset(&custom[0], 0, MAX_CUSTOM_LEN);
-    		iwe.cmd = IWEVCUSTOM;
-            iwe.u.data.length = (pAdapter->ScanTab.BssEntry[i].RsnIE.IELen * 2) + 7;
-            NdisMoveMemory(custom, "rsn_ie=", 7);
-			for (idx = 0; idx < pAdapter->ScanTab.BssEntry[i].RsnIE.IELen; idx++)
-                sprintf(custom, "%s%02x", custom, pAdapter->ScanTab.BssEntry[i].RsnIE.IE[idx]);
-            previous_ev = current_ev;
-    		current_ev = IWE_STREAM_ADD_POINT(info, current_ev, end_buf, &iwe,  custom);
-            if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-                return -E2BIG;
-#else
-			    break;
-#endif
-        }
-#endif // IWEVGENIE //
-	}
-
-	data->length = current_ev - extra;
-    pAdapter->StaCfg.bScanReqIsFromWebUI = FALSE;
-	DBGPRINT(RT_DEBUG_ERROR ,("===>rt_ioctl_giwscan. %d(%d) BSS returned, data->length = %d\n",i , pAdapter->ScanTab.BssNr, data->length));
-	return 0;
-}
-#endif
-
-int rt_ioctl_siwessid(struct net_device *dev,
-			 struct iw_request_info *info,
-			 struct iw_point *data, char *essid)
-{
-	PRTMP_ADAPTER pAdapter = (PRTMP_ADAPTER) dev->priv;
-
-	//check if the interface is down
-    if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-       	DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-       	return -ENETDOWN;
-    }
-
-	if (data->flags)
-	{
-		PCHAR	pSsidString = NULL;
-
-		// Includes null character.
-		if (data->length > (IW_ESSID_MAX_SIZE + 1))
-			return -E2BIG;
-
-		pSsidString = (CHAR *) kmalloc(MAX_LEN_OF_SSID+1, MEM_ALLOC_FLAG);
-		if (pSsidString)
-		{
-			NdisZeroMemory(pSsidString, MAX_LEN_OF_SSID+1);
-			NdisMoveMemory(pSsidString, essid, data->length);
-			if (Set_SSID_Proc(pAdapter, pSsidString) == FALSE)
-				return -EINVAL;
-		}
-		else
-			return -ENOMEM;
-	}
-	else
-	{
-		// ANY ssid
-		if (Set_SSID_Proc(pAdapter, "") == FALSE)
-			return -EINVAL;
-    }
-	return 0;
-}
-
-int rt_ioctl_giwessid(struct net_device *dev,
-			 struct iw_request_info *info,
-			 struct iw_point *data, char *essid)
-{
-	PRTMP_ADAPTER 	pAdapter = NULL;
-	VIRTUAL_ADAPTER *pVirtualAd = NULL;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->priv;
-	}
-	else
-	{
-		pVirtualAd = dev->priv;
-		if (pVirtualAd && pVirtualAd->RtmpDev)
-			pAdapter = pVirtualAd->RtmpDev->priv;
-	}
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-	data->flags = 1;
-    if (MONITOR_ON(pAdapter))
-    {
-        data->length  = 0;
-        return 0;
-    }
-
-	if (OPSTATUS_TEST_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED))
-	{
-		DBGPRINT(RT_DEBUG_TRACE ,("MediaState is connected\n"));
-		data->length = pAdapter->CommonCfg.SsidLen;
-		memcpy(essid, pAdapter->CommonCfg.Ssid, pAdapter->CommonCfg.SsidLen);
-	}
-#ifdef RT2870
-#ifdef WPA_SUPPLICANT_SUPPORT
-    // Add for RT2870
-    else if (pAdapter->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
-    {
-        data->length = pAdapter->CommonCfg.SsidLen;
-		memcpy(essid, pAdapter->CommonCfg.Ssid, pAdapter->CommonCfg.SsidLen);
-	}
-#endif // WPA_SUPPLICANT_SUPPORT //
-#endif // RT2870 //
-	else
-	{//the ANY ssid was specified
-		data->length  = 0;
-		DBGPRINT(RT_DEBUG_TRACE ,("MediaState is not connected, ess\n"));
-	}
-
-	return 0;
-
-}
-
-int rt_ioctl_siwnickn(struct net_device *dev,
-			 struct iw_request_info *info,
-			 struct iw_point *data, char *nickname)
-{
-	PRTMP_ADAPTER pAdapter = (PRTMP_ADAPTER) dev->priv;
-
-    //check if the interface is down
-    if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-        DBGPRINT(RT_DEBUG_TRACE ,("INFO::Network is down!\n"));
-        return -ENETDOWN;
-    }
-
-	if (data->length > IW_ESSID_MAX_SIZE)
-		return -EINVAL;
-
-	memset(pAdapter->nickname, 0, IW_ESSID_MAX_SIZE + 1);
-	memcpy(pAdapter->nickname, nickname, data->length);
-
-
-	return 0;
-}
-
-int rt_ioctl_giwnickn(struct net_device *dev,
-			 struct iw_request_info *info,
-			 struct iw_point *data, char *nickname)
-{
-	PRTMP_ADAPTER 	pAdapter = NULL;
-	VIRTUAL_ADAPTER *pVirtualAd = NULL;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->priv;
-	}
-	else
-	{
-		pVirtualAd = dev->priv;
-		if (pVirtualAd && pVirtualAd->RtmpDev)
-			pAdapter = pVirtualAd->RtmpDev->priv;
-	}
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-	if (data->length > strlen(pAdapter->nickname) + 1)
-		data->length = strlen(pAdapter->nickname) + 1;
-	if (data->length > 0) {
-		memcpy(nickname, pAdapter->nickname, data->length-1);
-		nickname[data->length-1] = '\0';
-	}
-	return 0;
-}
-
-int rt_ioctl_siwrts(struct net_device *dev,
-		       struct iw_request_info *info,
-		       struct iw_param *rts, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = (PRTMP_ADAPTER) dev->priv;
-	u16 val;
-
-    //check if the interface is down
-    if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-        return -ENETDOWN;
-    }
-
-	if (rts->disabled)
-		val = MAX_RTS_THRESHOLD;
-	else if (rts->value < 0 || rts->value > MAX_RTS_THRESHOLD)
-		return -EINVAL;
-	else if (rts->value == 0)
-	    val = MAX_RTS_THRESHOLD;
-	else
-		val = rts->value;
-
-	if (val != pAdapter->CommonCfg.RtsThreshold)
-		pAdapter->CommonCfg.RtsThreshold = val;
-
-	return 0;
-}
-
-int rt_ioctl_giwrts(struct net_device *dev,
-		       struct iw_request_info *info,
-		       struct iw_param *rts, char *extra)
-{
-	PRTMP_ADAPTER 	pAdapter = NULL;
-	VIRTUAL_ADAPTER *pVirtualAd = NULL;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->priv;
-	}
-	else
-	{
-		pVirtualAd = dev->priv;
-		if (pVirtualAd && pVirtualAd->RtmpDev)
-			pAdapter = pVirtualAd->RtmpDev->priv;
-	}
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-	//check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-  		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-    	return -ENETDOWN;
-	}
-
-	rts->value = pAdapter->CommonCfg.RtsThreshold;
-	rts->disabled = (rts->value == MAX_RTS_THRESHOLD);
-	rts->fixed = 1;
-
-	return 0;
-}
-
-int rt_ioctl_siwfrag(struct net_device *dev,
-			struct iw_request_info *info,
-			struct iw_param *frag, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = (PRTMP_ADAPTER) dev->priv;
-	u16 val;
-
-	//check if the interface is down
-    	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    	{
-      		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-        	return -ENETDOWN;
-    	}
-
-	if (frag->disabled)
-		val = MAX_FRAG_THRESHOLD;
-	else if (frag->value >= MIN_FRAG_THRESHOLD || frag->value <= MAX_FRAG_THRESHOLD)
-        val = __cpu_to_le16(frag->value & ~0x1); /* even numbers only */
-	else if (frag->value == 0)
-	    val = MAX_FRAG_THRESHOLD;
-	else
-		return -EINVAL;
-
-	pAdapter->CommonCfg.FragmentThreshold = val;
-	return 0;
-}
-
-int rt_ioctl_giwfrag(struct net_device *dev,
-			struct iw_request_info *info,
-			struct iw_param *frag, char *extra)
-{
-	PRTMP_ADAPTER 	pAdapter = NULL;
-	VIRTUAL_ADAPTER *pVirtualAd = NULL;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->priv;
-	}
-	else
-	{
-		pVirtualAd = dev->priv;
-		if (pVirtualAd && pVirtualAd->RtmpDev)
-			pAdapter = pVirtualAd->RtmpDev->priv;
-	}
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-	//check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-  		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-    	return -ENETDOWN;
-	}
-
-	frag->value = pAdapter->CommonCfg.FragmentThreshold;
-	frag->disabled = (frag->value == MAX_FRAG_THRESHOLD);
-	frag->fixed = 1;
-
-	return 0;
-}
-
-#define MAX_WEP_KEY_SIZE 13
-#define MIN_WEP_KEY_SIZE 5
-int rt_ioctl_siwencode(struct net_device *dev,
-			  struct iw_request_info *info,
-			  struct iw_point *erq, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = (PRTMP_ADAPTER) dev->priv;
-
-	//check if the interface is down
-    	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    	{
-      		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-        	return -ENETDOWN;
-    	}
-
-	if ((erq->length == 0) &&
-        (erq->flags & IW_ENCODE_DISABLED))
-	{
-		pAdapter->StaCfg.PairCipher = Ndis802_11WEPDisabled;
-		pAdapter->StaCfg.GroupCipher = Ndis802_11WEPDisabled;
-		pAdapter->StaCfg.WepStatus = Ndis802_11WEPDisabled;
-        pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
-        goto done;
-	}
-	else if ((erq->length == 0) &&
-             (erq->flags & IW_ENCODE_RESTRICTED || erq->flags & IW_ENCODE_OPEN))
-	{
-	    //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-		STA_PORT_SECURED(pAdapter);
-		pAdapter->StaCfg.PairCipher = Ndis802_11WEPEnabled;
-		pAdapter->StaCfg.GroupCipher = Ndis802_11WEPEnabled;
-		pAdapter->StaCfg.WepStatus = Ndis802_11WEPEnabled;
-        pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-		if (erq->flags & IW_ENCODE_RESTRICTED)
-			pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeShared;
-    	else
-			pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
-        goto done;
-	}
-
-    if (erq->length > 0)
-	{
-		int keyIdx = (erq->flags & IW_ENCODE_INDEX) - 1;
-		/* Check the size of the key */
-		if (erq->length > MAX_WEP_KEY_SIZE) {
-			return -EINVAL;
-		}
-		/* Check key index */
-		if ((keyIdx < 0) || (keyIdx >= NR_WEP_KEYS))
-        {
-            DBGPRINT(RT_DEBUG_TRACE ,("==>rt_ioctl_siwencode::Wrong keyIdx=%d! Using default key instead (%d)\n",
-                                        keyIdx, pAdapter->StaCfg.DefaultKeyId));
-
-            //Using default key
-			keyIdx = pAdapter->StaCfg.DefaultKeyId;
-        }
-
-        NdisZeroMemory(pAdapter->SharedKey[BSS0][keyIdx].Key,  16);
-
-		if (erq->length == MAX_WEP_KEY_SIZE)
-        {
-			pAdapter->SharedKey[BSS0][keyIdx].KeyLen = MAX_WEP_KEY_SIZE;
-            pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CIPHER_WEP128;
-		}
-		else if (erq->length == MIN_WEP_KEY_SIZE)
-        {
-            pAdapter->SharedKey[BSS0][keyIdx].KeyLen = MIN_WEP_KEY_SIZE;
-            pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CIPHER_WEP64;
-		}
-		else
-			/* Disable the key */
-			pAdapter->SharedKey[BSS0][keyIdx].KeyLen = 0;
-
-		/* Check if the key is not marked as invalid */
-		if(!(erq->flags & IW_ENCODE_NOKEY)) {
-			/* Copy the key in the driver */
-			NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, extra, erq->length);
-        }
-	}
-    else
-			{
-		/* Do we want to just set the transmit key index ? */
-		int index = (erq->flags & IW_ENCODE_INDEX) - 1;
-		if ((index >= 0) && (index < 4))
-        {
-			pAdapter->StaCfg.DefaultKeyId = index;
-            }
-        else
-			/* Don't complain if only change the mode */
-			if(!erq->flags & IW_ENCODE_MODE) {
-				return -EINVAL;
-		}
-	}
-
-done:
-    DBGPRINT(RT_DEBUG_TRACE ,("==>rt_ioctl_siwencode::erq->flags=%x\n",erq->flags));
-	DBGPRINT(RT_DEBUG_TRACE ,("==>rt_ioctl_siwencode::AuthMode=%x\n",pAdapter->StaCfg.AuthMode));
-	DBGPRINT(RT_DEBUG_TRACE ,("==>rt_ioctl_siwencode::DefaultKeyId=%x, KeyLen = %d\n",pAdapter->StaCfg.DefaultKeyId , pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen));
-	DBGPRINT(RT_DEBUG_TRACE ,("==>rt_ioctl_siwencode::WepStatus=%x\n",pAdapter->StaCfg.WepStatus));
-	return 0;
-}
-
-int
-rt_ioctl_giwencode(struct net_device *dev,
-			  struct iw_request_info *info,
-			  struct iw_point *erq, char *key)
-{
-	int kid;
-	PRTMP_ADAPTER 	pAdapter = NULL;
-	VIRTUAL_ADAPTER *pVirtualAd = NULL;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->priv;
-	}
-	else
-	{
-		pVirtualAd = dev->priv;
-		if (pVirtualAd && pVirtualAd->RtmpDev)
-			pAdapter = pVirtualAd->RtmpDev->priv;
-	}
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-	//check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-  		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-    	return -ENETDOWN;
-	}
-
-	kid = erq->flags & IW_ENCODE_INDEX;
-	DBGPRINT(RT_DEBUG_TRACE, ("===>rt_ioctl_giwencode %d\n", erq->flags & IW_ENCODE_INDEX));
-
-	if (pAdapter->StaCfg.WepStatus == Ndis802_11WEPDisabled)
-	{
-		erq->length = 0;
-		erq->flags = IW_ENCODE_DISABLED;
-	}
-	else if ((kid > 0) && (kid <=4))
-	{
-		// copy wep key
-		erq->flags = kid ;			/* NB: base 1 */
-		if (erq->length > pAdapter->SharedKey[BSS0][kid-1].KeyLen)
-			erq->length = pAdapter->SharedKey[BSS0][kid-1].KeyLen;
-		memcpy(key, pAdapter->SharedKey[BSS0][kid-1].Key, erq->length);
-		//if ((kid == pAdapter->PortCfg.DefaultKeyId))
-		//erq->flags |= IW_ENCODE_ENABLED;	/* XXX */
-		if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeShared)
-			erq->flags |= IW_ENCODE_RESTRICTED;		/* XXX */
-		else
-			erq->flags |= IW_ENCODE_OPEN;		/* XXX */
-
-	}
-	else if (kid == 0)
-	{
-		if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeShared)
-			erq->flags |= IW_ENCODE_RESTRICTED;		/* XXX */
-		else
-			erq->flags |= IW_ENCODE_OPEN;		/* XXX */
-		erq->length = pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen;
-		memcpy(key, pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].Key, erq->length);
-		// copy default key ID
-		if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeShared)
-			erq->flags |= IW_ENCODE_RESTRICTED;		/* XXX */
-		else
-			erq->flags |= IW_ENCODE_OPEN;		/* XXX */
-		erq->flags = pAdapter->StaCfg.DefaultKeyId + 1;			/* NB: base 1 */
-		erq->flags |= IW_ENCODE_ENABLED;	/* XXX */
-	}
-
-	return 0;
-
-}
-
-static int
-rt_ioctl_setparam(struct net_device *dev, struct iw_request_info *info,
-			 void *w, char *extra)
-{
-    VIRTUAL_ADAPTER	*pVirtualAd = NULL;
-	PRTMP_ADAPTER pAdapter;
-	POS_COOKIE pObj;
-	char *this_char = extra;
-	char *value;
-	int  Status=0;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->priv;
-	}
-	else
-	{
-		pVirtualAd = dev->priv;
-		pAdapter = pVirtualAd->RtmpDev->priv;
-	}
-	pObj = (POS_COOKIE) pAdapter->OS_Cookie;
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-	{
-		pObj->ioctl_if_type = INT_MAIN;
-        pObj->ioctl_if = MAIN_MBSSID;
-	}
-
-	//check if the interface is down
-    	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    	{
-      		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-			return -ENETDOWN;
-    	}
-
-	if (!*this_char)
-		return -EINVAL;
-
-	if ((value = rtstrchr(this_char, '=')) != NULL)
-	    *value++ = 0;
-
-	if (!value)
-	    return -EINVAL;
-
-	// reject setting nothing besides ANY ssid(ssidLen=0)
-    if (!*value && (strcmp(this_char, "SSID") != 0))
-        return -EINVAL;
-
-	for (PRTMP_PRIVATE_SET_PROC = RTMP_PRIVATE_SUPPORT_PROC; PRTMP_PRIVATE_SET_PROC->name; PRTMP_PRIVATE_SET_PROC++)
-	{
-	    if (strcmp(this_char, PRTMP_PRIVATE_SET_PROC->name) == 0)
-	    {
-	        if(!PRTMP_PRIVATE_SET_PROC->set_proc(pAdapter, value))
-	        {	//FALSE:Set private failed then return Invalid argument
-			    Status = -EINVAL;
-	        }
-		    break;	//Exit for loop.
-	    }
-	}
-
-	if(PRTMP_PRIVATE_SET_PROC->name == NULL)
-	{  //Not found argument
-	    Status = -EINVAL;
-	    DBGPRINT(RT_DEBUG_TRACE, ("===>rt_ioctl_setparam:: (iwpriv) Not Support Set Command [%s=%s]\n", this_char, value));
-	}
-
-    return Status;
-}
-
-
-static int
-rt_private_get_statistics(struct net_device *dev, struct iw_request_info *info,
-		struct iw_point *wrq, char *extra)
-{
-	INT				Status = 0;
-    PRTMP_ADAPTER   pAd = (PRTMP_ADAPTER) dev->priv;
-
-    if (extra == NULL)
-    {
-        wrq->length = 0;
-        return -EIO;
-    }
-
-    memset(extra, 0x00, IW_PRIV_SIZE_MASK);
-    sprintf(extra, "\n\n");
-
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-	{
-	    sprintf(extra+strlen(extra), "Tx success                      = %ld\n", (ULONG)pAd->ate.TxDoneCount);
-	    //sprintf(extra+strlen(extra), "Tx success without retry        = %ld\n", (ULONG)pAd->ate.TxDoneCount);
-	}
-	else
-#endif // RALINK_ATE //
-	{
-    sprintf(extra+strlen(extra), "Tx success                      = %ld\n", (ULONG)pAd->WlanCounters.TransmittedFragmentCount.QuadPart);
-    sprintf(extra+strlen(extra), "Tx success without retry        = %ld\n", (ULONG)pAd->WlanCounters.TransmittedFragmentCount.QuadPart - (ULONG)pAd->WlanCounters.RetryCount.QuadPart);
-	}
-    sprintf(extra+strlen(extra), "Tx success after retry          = %ld\n", (ULONG)pAd->WlanCounters.RetryCount.QuadPart);
-    sprintf(extra+strlen(extra), "Tx fail to Rcv ACK after retry  = %ld\n", (ULONG)pAd->WlanCounters.FailedCount.QuadPart);
-    sprintf(extra+strlen(extra), "RTS Success Rcv CTS             = %ld\n", (ULONG)pAd->WlanCounters.RTSSuccessCount.QuadPart);
-    sprintf(extra+strlen(extra), "RTS Fail Rcv CTS                = %ld\n", (ULONG)pAd->WlanCounters.RTSFailureCount.QuadPart);
-
-    sprintf(extra+strlen(extra), "Rx success                      = %ld\n", (ULONG)pAd->WlanCounters.ReceivedFragmentCount.QuadPart);
-    sprintf(extra+strlen(extra), "Rx with CRC                     = %ld\n", (ULONG)pAd->WlanCounters.FCSErrorCount.QuadPart);
-    sprintf(extra+strlen(extra), "Rx drop due to out of resource  = %ld\n", (ULONG)pAd->Counters8023.RxNoBuffer);
-    sprintf(extra+strlen(extra), "Rx duplicate frame              = %ld\n", (ULONG)pAd->WlanCounters.FrameDuplicateCount.QuadPart);
-
-    sprintf(extra+strlen(extra), "False CCA (one second)          = %ld\n", (ULONG)pAd->RalinkCounters.OneSecFalseCCACnt);
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-	{
-		if (pAd->ate.RxAntennaSel == 0)
-		{
-    		sprintf(extra+strlen(extra), "RSSI-A                          = %ld\n", (LONG)(pAd->ate.LastRssi0 - pAd->BbpRssiToDbmDelta));
-			sprintf(extra+strlen(extra), "RSSI-B (if available)           = %ld\n", (LONG)(pAd->ate.LastRssi1 - pAd->BbpRssiToDbmDelta));
-			sprintf(extra+strlen(extra), "RSSI-C (if available)           = %ld\n\n", (LONG)(pAd->ate.LastRssi2 - pAd->BbpRssiToDbmDelta));
-		}
-		else
-		{
-    		sprintf(extra+strlen(extra), "RSSI                            = %ld\n", (LONG)(pAd->ate.LastRssi0 - pAd->BbpRssiToDbmDelta));
-		}
-	}
-	else
-#endif // RALINK_ATE //
-	{
-    	sprintf(extra+strlen(extra), "RSSI-A                          = %ld\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi0 - pAd->BbpRssiToDbmDelta));
-        sprintf(extra+strlen(extra), "RSSI-B (if available)           = %ld\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi1 - pAd->BbpRssiToDbmDelta));
-        sprintf(extra+strlen(extra), "RSSI-C (if available)           = %ld\n\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi2 - pAd->BbpRssiToDbmDelta));
-	}
-#ifdef WPA_SUPPLICANT_SUPPORT
-    sprintf(extra+strlen(extra), "WpaSupplicantUP                 = %d\n\n", pAd->StaCfg.WpaSupplicantUP);
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-
-    wrq->length = strlen(extra) + 1; // 1: size of '\0'
-    DBGPRINT(RT_DEBUG_TRACE, ("<== rt_private_get_statistics, wrq->length = %d\n", wrq->length));
-
-    return Status;
-}
-
-#ifdef DOT11_N_SUPPORT
-void	getBaInfo(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pOutBuf)
-{
-	INT i, j;
-	BA_ORI_ENTRY *pOriBAEntry;
-	BA_REC_ENTRY *pRecBAEntry;
-
-	for (i=0; i<MAX_LEN_OF_MAC_TABLE; i++)
-	{
-		PMAC_TABLE_ENTRY pEntry = &pAd->MacTab.Content[i];
-		if (((pEntry->ValidAsCLI || pEntry->ValidAsApCli) && (pEntry->Sst == SST_ASSOC))
-			|| (pEntry->ValidAsWDS) || (pEntry->ValidAsMesh))
-		{
-			sprintf(pOutBuf, "%s\n%02X:%02X:%02X:%02X:%02X:%02X (Aid = %d) (AP) -\n",
-                pOutBuf,
-				pEntry->Addr[0], pEntry->Addr[1], pEntry->Addr[2],
-				pEntry->Addr[3], pEntry->Addr[4], pEntry->Addr[5], pEntry->Aid);
-
-			sprintf(pOutBuf, "%s[Recipient]\n", pOutBuf);
-			for (j=0; j < NUM_OF_TID; j++)
-			{
-				if (pEntry->BARecWcidArray[j] != 0)
-				{
-					pRecBAEntry =&pAd->BATable.BARecEntry[pEntry->BARecWcidArray[j]];
-					sprintf(pOutBuf, "%sTID=%d, BAWinSize=%d, LastIndSeq=%d, ReorderingPkts=%d\n", pOutBuf, j, pRecBAEntry->BAWinSize, pRecBAEntry->LastIndSeq, pRecBAEntry->list.qlen);
-				}
-			}
-			sprintf(pOutBuf, "%s\n", pOutBuf);
-
-			sprintf(pOutBuf, "%s[Originator]\n", pOutBuf);
-			for (j=0; j < NUM_OF_TID; j++)
-			{
-				if (pEntry->BAOriWcidArray[j] != 0)
-				{
-					pOriBAEntry =&pAd->BATable.BAOriEntry[pEntry->BAOriWcidArray[j]];
-					sprintf(pOutBuf, "%sTID=%d, BAWinSize=%d, StartSeq=%d, CurTxSeq=%d\n", pOutBuf, j, pOriBAEntry->BAWinSize, pOriBAEntry->Sequence, pEntry->TxSeq[j]);
-				}
-			}
-			sprintf(pOutBuf, "%s\n\n", pOutBuf);
-		}
-        if (strlen(pOutBuf) > (IW_PRIV_SIZE_MASK - 30))
-                break;
-	}
-
-	return;
-}
-#endif // DOT11_N_SUPPORT //
-
-static int
-rt_private_show(struct net_device *dev, struct iw_request_info *info,
-		struct iw_point *wrq, char *extra)
-{
-    INT				Status = 0;
-    VIRTUAL_ADAPTER	*pVirtualAd = NULL;
-    PRTMP_ADAPTER   pAd;
-	POS_COOKIE		pObj;
-    u32             subcmd = wrq->flags;
-
-	if (dev->priv_flags == INT_MAIN)
-		pAd = dev->priv;
-	else
-	{
-		pVirtualAd = dev->priv;
-		pAd = pVirtualAd->RtmpDev->priv;
-	}
-	pObj = (POS_COOKIE) pAd->OS_Cookie;
-
-	if (pAd == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-    if (extra == NULL)
-    {
-        wrq->length = 0;
-        return -EIO;
-    }
-    memset(extra, 0x00, IW_PRIV_SIZE_MASK);
-
-	{
-		pObj->ioctl_if_type = INT_MAIN;
-        pObj->ioctl_if = MAIN_MBSSID;
-	}
-
-    switch(subcmd)
-    {
-
-        case SHOW_CONN_STATUS:
-            if (MONITOR_ON(pAd))
-            {
-#ifdef DOT11_N_SUPPORT
-                if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED &&
-                    pAd->CommonCfg.RegTransmitSetting.field.BW)
-                    sprintf(extra, "Monitor Mode(CentralChannel %d)\n", pAd->CommonCfg.CentralChannel);
-                else
-#endif // DOT11_N_SUPPORT //
-                    sprintf(extra, "Monitor Mode(Channel %d)\n", pAd->CommonCfg.Channel);
-            }
-            else
-            {
-                if (pAd->IndicateMediaState == NdisMediaStateConnected)
-            	{
-            	    if (INFRA_ON(pAd))
-                    {
-                    sprintf(extra, "Connected(AP: %s[%02X:%02X:%02X:%02X:%02X:%02X])\n",
-                                    pAd->CommonCfg.Ssid,
-                                    pAd->CommonCfg.Bssid[0],
-                                    pAd->CommonCfg.Bssid[1],
-                                    pAd->CommonCfg.Bssid[2],
-                                    pAd->CommonCfg.Bssid[3],
-                                    pAd->CommonCfg.Bssid[4],
-                                    pAd->CommonCfg.Bssid[5]);
-            		DBGPRINT(RT_DEBUG_TRACE ,("Ssid=%s ,Ssidlen = %d\n",pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen));
-            	}
-                    else if (ADHOC_ON(pAd))
-                        sprintf(extra, "Connected\n");
-            	}
-            	else
-            	{
-            	    sprintf(extra, "Disconnected\n");
-            		DBGPRINT(RT_DEBUG_TRACE ,("ConnStatus is not connected\n"));
-            	}
-            }
-            wrq->length = strlen(extra) + 1; // 1: size of '\0'
-            break;
-        case SHOW_DRVIER_VERION:
-            sprintf(extra, "Driver version-%s, %s %s\n", STA_DRIVER_VERSION, __DATE__, __TIME__ );
-            wrq->length = strlen(extra) + 1; // 1: size of '\0'
-            break;
-#ifdef DOT11_N_SUPPORT
-        case SHOW_BA_INFO:
-            getBaInfo(pAd, extra);
-            wrq->length = strlen(extra) + 1; // 1: size of '\0'
-            break;
-#endif // DOT11_N_SUPPORT //
-		case SHOW_DESC_INFO:
-			{
-				Show_DescInfo_Proc(pAd, NULL);
-				wrq->length = 0; // 1: size of '\0'
-			}
-			break;
-        case RAIO_OFF:
-            if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-            {
-                sprintf(extra, "Scanning\n");
-                wrq->length = strlen(extra) + 1; // 1: size of '\0'
-                break;
-            }
-            pAd->StaCfg.bSwRadio = FALSE;
-            if (pAd->StaCfg.bRadio != (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio))
-            {
-                pAd->StaCfg.bRadio = (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio);
-                if (pAd->StaCfg.bRadio == FALSE)
-                {
-                    MlmeRadioOff(pAd);
-                    // Update extra information
-					pAd->ExtraInfo = SW_RADIO_OFF;
-                }
-            }
-            sprintf(extra, "Radio Off\n");
-            wrq->length = strlen(extra) + 1; // 1: size of '\0'
-            break;
-        case RAIO_ON:
-            if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-            {
-                sprintf(extra, "Scanning\n");
-                wrq->length = strlen(extra) + 1; // 1: size of '\0'
-                break;
-            }
-            pAd->StaCfg.bSwRadio = TRUE;
-            //if (pAd->StaCfg.bRadio != (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio))
-            {
-                pAd->StaCfg.bRadio = (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio);
-                if (pAd->StaCfg.bRadio == TRUE)
-                {
-                    MlmeRadioOn(pAd);
-                    // Update extra information
-					pAd->ExtraInfo = EXTRA_INFO_CLEAR;
-                }
-            }
-            sprintf(extra, "Radio On\n");
-            wrq->length = strlen(extra) + 1; // 1: size of '\0'
-            break;
-
-
-#ifdef QOS_DLS_SUPPORT
-		case SHOW_DLS_ENTRY_INFO:
-			{
-				Set_DlsEntryInfo_Display_Proc(pAd, NULL);
-				wrq->length = 0; // 1: size of '\0'
-			}
-			break;
-#endif // QOS_DLS_SUPPORT //
-
-		case SHOW_CFG_VALUE:
-			{
-				Status = RTMPShowCfgValue(pAd, wrq->pointer, extra);
-				if (Status == 0)
-					wrq->length = strlen(extra) + 1; // 1: size of '\0'
-			}
-			break;
-		case SHOW_ADHOC_ENTRY_INFO:
-			Show_Adhoc_MacTable_Proc(pAd, extra);
-			wrq->length = strlen(extra) + 1; // 1: size of '\0'
-			break;
-        default:
-            DBGPRINT(RT_DEBUG_TRACE, ("%s - unknow subcmd = %d\n", __func__, subcmd));
-            break;
-    }
-
-    return Status;
-}
-
-#ifdef SIOCSIWMLME
-int rt_ioctl_siwmlme(struct net_device *dev,
-			   struct iw_request_info *info,
-			   union iwreq_data *wrqu,
-			   char *extra)
-{
-	PRTMP_ADAPTER   pAd = (PRTMP_ADAPTER) dev->priv;
-	struct iw_mlme *pMlme = (struct iw_mlme *)wrqu->data.pointer;
-	MLME_QUEUE_ELEM				MsgElem;
-	MLME_DISASSOC_REQ_STRUCT	DisAssocReq;
-	MLME_DEAUTH_REQ_STRUCT      DeAuthReq;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("====> %s\n", __func__));
-
-	if (pMlme == NULL)
-		return -EINVAL;
-
-	switch(pMlme->cmd)
-	{
-#ifdef IW_MLME_DEAUTH
-		case IW_MLME_DEAUTH:
-			DBGPRINT(RT_DEBUG_TRACE, ("====> %s - IW_MLME_DEAUTH\n", __func__));
-			COPY_MAC_ADDR(DeAuthReq.Addr, pAd->CommonCfg.Bssid);
-			DeAuthReq.Reason = pMlme->reason_code;
-			MsgElem.MsgLen = sizeof(MLME_DEAUTH_REQ_STRUCT);
-			NdisMoveMemory(MsgElem.Msg, &DeAuthReq, sizeof(MLME_DEAUTH_REQ_STRUCT));
-			MlmeDeauthReqAction(pAd, &MsgElem);
-			if (INFRA_ON(pAd))
-			{
-			    LinkDown(pAd, FALSE);
-			    pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-			}
-			break;
-#endif // IW_MLME_DEAUTH //
-#ifdef IW_MLME_DISASSOC
-		case IW_MLME_DISASSOC:
-			DBGPRINT(RT_DEBUG_TRACE, ("====> %s - IW_MLME_DISASSOC\n", __func__));
-			COPY_MAC_ADDR(DisAssocReq.Addr, pAd->CommonCfg.Bssid);
-			DisAssocReq.Reason =  pMlme->reason_code;
-
-			MsgElem.Machine = ASSOC_STATE_MACHINE;
-			MsgElem.MsgType = MT2_MLME_DISASSOC_REQ;
-			MsgElem.MsgLen = sizeof(MLME_DISASSOC_REQ_STRUCT);
-			NdisMoveMemory(MsgElem.Msg, &DisAssocReq, sizeof(MLME_DISASSOC_REQ_STRUCT));
-
-			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
-			MlmeDisassocReqAction(pAd, &MsgElem);
-			break;
-#endif // IW_MLME_DISASSOC //
-		default:
-			DBGPRINT(RT_DEBUG_TRACE, ("====> %s - Unknow Command\n", __func__));
-			break;
-	}
-
-	return 0;
-}
-#endif // SIOCSIWMLME //
-
-#if WIRELESS_EXT > 17
-int rt_ioctl_siwauth(struct net_device *dev,
-			  struct iw_request_info *info,
-			  union iwreq_data *wrqu, char *extra)
-{
-	PRTMP_ADAPTER   pAdapter = (PRTMP_ADAPTER) dev->priv;
-	struct iw_param *param = &wrqu->param;
-
-    //check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-  		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-    	return -ENETDOWN;
-	}
-	switch (param->flags & IW_AUTH_INDEX) {
-    	case IW_AUTH_WPA_VERSION:
-            if (param->value == IW_AUTH_WPA_VERSION_WPA)
-            {
-                pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPAPSK;
-				if (pAdapter->StaCfg.BssType == BSS_ADHOC)
-					pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPANone;
-            }
-            else if (param->value == IW_AUTH_WPA_VERSION_WPA2)
-                pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2PSK;
-
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_WPA_VERSION - param->value = %d!\n", __func__, param->value));
-            break;
-    	case IW_AUTH_CIPHER_PAIRWISE:
-            if (param->value == IW_AUTH_CIPHER_NONE)
-            {
-                pAdapter->StaCfg.WepStatus = Ndis802_11WEPDisabled;
-                pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-                pAdapter->StaCfg.PairCipher = Ndis802_11WEPDisabled;
-            }
-            else if (param->value == IW_AUTH_CIPHER_WEP40 ||
-                     param->value == IW_AUTH_CIPHER_WEP104)
-            {
-                pAdapter->StaCfg.WepStatus = Ndis802_11WEPEnabled;
-                pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-                pAdapter->StaCfg.PairCipher = Ndis802_11WEPEnabled;
-#ifdef WPA_SUPPLICANT_SUPPORT
-                pAdapter->StaCfg.IEEE8021X = FALSE;
-#endif // WPA_SUPPLICANT_SUPPORT //
-            }
-            else if (param->value == IW_AUTH_CIPHER_TKIP)
-            {
-                pAdapter->StaCfg.WepStatus = Ndis802_11Encryption2Enabled;
-                pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-                pAdapter->StaCfg.PairCipher = Ndis802_11Encryption2Enabled;
-            }
-            else if (param->value == IW_AUTH_CIPHER_CCMP)
-            {
-                pAdapter->StaCfg.WepStatus = Ndis802_11Encryption3Enabled;
-                pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-                pAdapter->StaCfg.PairCipher = Ndis802_11Encryption3Enabled;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_CIPHER_PAIRWISE - param->value = %d!\n", __func__, param->value));
-            break;
-    	case IW_AUTH_CIPHER_GROUP:
-            if (param->value == IW_AUTH_CIPHER_NONE)
-            {
-                pAdapter->StaCfg.GroupCipher = Ndis802_11WEPDisabled;
-            }
-            else if (param->value == IW_AUTH_CIPHER_WEP40 ||
-                     param->value == IW_AUTH_CIPHER_WEP104)
-            {
-                pAdapter->StaCfg.GroupCipher = Ndis802_11WEPEnabled;
-            }
-            else if (param->value == IW_AUTH_CIPHER_TKIP)
-            {
-                pAdapter->StaCfg.GroupCipher = Ndis802_11Encryption2Enabled;
-            }
-            else if (param->value == IW_AUTH_CIPHER_CCMP)
-            {
-                pAdapter->StaCfg.GroupCipher = Ndis802_11Encryption3Enabled;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_CIPHER_GROUP - param->value = %d!\n", __func__, param->value));
-            break;
-    	case IW_AUTH_KEY_MGMT:
-            if (param->value == IW_AUTH_KEY_MGMT_802_1X)
-            {
-                if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK)
-                {
-                    pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA;
-#ifdef WPA_SUPPLICANT_SUPPORT
-                    pAdapter->StaCfg.IEEE8021X = FALSE;
-#endif // WPA_SUPPLICANT_SUPPORT //
-                }
-                else if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)
-                {
-                    pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2;
-#ifdef WPA_SUPPLICANT_SUPPORT
-                    pAdapter->StaCfg.IEEE8021X = FALSE;
-#endif // WPA_SUPPLICANT_SUPPORT //
-                }
-#ifdef WPA_SUPPLICANT_SUPPORT
-                else
-                    // WEP 1x
-                    pAdapter->StaCfg.IEEE8021X = TRUE;
-#endif // WPA_SUPPLICANT_SUPPORT //
-            }
-            else if (param->value == 0)
-            {
-                //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-				STA_PORT_SECURED(pAdapter);
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_KEY_MGMT - param->value = %d!\n", __func__, param->value));
-            break;
-    	case IW_AUTH_RX_UNENCRYPTED_EAPOL:
-            break;
-    	case IW_AUTH_PRIVACY_INVOKED:
-            /*if (param->value == 0)
-			{
-                pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
-                pAdapter->StaCfg.WepStatus = Ndis802_11WEPDisabled;
-                pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-                pAdapter->StaCfg.PairCipher = Ndis802_11WEPDisabled;
-        	    pAdapter->StaCfg.GroupCipher = Ndis802_11WEPDisabled;
-            }*/
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_PRIVACY_INVOKED - param->value = %d!\n", __func__, param->value));
-    		break;
-    	case IW_AUTH_DROP_UNENCRYPTED:
-            if (param->value != 0)
-                pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-			else
-			{
-                //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-				STA_PORT_SECURED(pAdapter);
-			}
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_WPA_VERSION - param->value = %d!\n", __func__, param->value));
-    		break;
-    	case IW_AUTH_80211_AUTH_ALG:
-			if (param->value & IW_AUTH_ALG_SHARED_KEY)
-            {
-				pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeShared;
-			}
-            else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM)
-            {
-				pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
-			}
-            else
-				return -EINVAL;
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_80211_AUTH_ALG - param->value = %d!\n", __func__, param->value));
-			break;
-    	case IW_AUTH_WPA_ENABLED:
-    		DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_WPA_ENABLED - Driver supports WPA!(param->value = %d)\n", __func__, param->value));
-    		break;
-    	default:
-    		return -EOPNOTSUPP;
-}
-
-	return 0;
-}
-
-int rt_ioctl_giwauth(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-	PRTMP_ADAPTER   pAdapter = (PRTMP_ADAPTER) dev->priv;
-	struct iw_param *param = &wrqu->param;
-
-    //check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-  		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-    	return -ENETDOWN;
-    }
-
-	switch (param->flags & IW_AUTH_INDEX) {
-	case IW_AUTH_DROP_UNENCRYPTED:
-        param->value = (pAdapter->StaCfg.WepStatus == Ndis802_11WEPDisabled) ? 0 : 1;
-		break;
-
-	case IW_AUTH_80211_AUTH_ALG:
-        param->value = (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeShared) ? IW_AUTH_ALG_SHARED_KEY : IW_AUTH_ALG_OPEN_SYSTEM;
-		break;
-
-	case IW_AUTH_WPA_ENABLED:
-		param->value = (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA) ? 1 : 0;
-		break;
-
-	default:
-		return -EOPNOTSUPP;
-	}
-    DBGPRINT(RT_DEBUG_TRACE, ("rt_ioctl_giwauth::param->value = %d!\n", param->value));
-	return 0;
-}
-
-void fnSetCipherKey(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  INT             keyIdx,
-    IN  UCHAR           CipherAlg,
-    IN  BOOLEAN         bGTK,
-    IN  struct iw_encode_ext *ext)
-{
-    NdisZeroMemory(&pAdapter->SharedKey[BSS0][keyIdx], sizeof(CIPHER_KEY));
-    pAdapter->SharedKey[BSS0][keyIdx].KeyLen = LEN_TKIP_EK;
-    NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, ext->key, LEN_TKIP_EK);
-    NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].TxMic, ext->key + LEN_TKIP_EK, LEN_TKIP_TXMICK);
-    NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].RxMic, ext->key + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK);
-    pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CipherAlg;
-
-    // Update group key information to ASIC Shared Key Table
-	AsicAddSharedKeyEntry(pAdapter,
-						  BSS0,
-						  keyIdx,
-						  pAdapter->SharedKey[BSS0][keyIdx].CipherAlg,
-						  pAdapter->SharedKey[BSS0][keyIdx].Key,
-						  pAdapter->SharedKey[BSS0][keyIdx].TxMic,
-						  pAdapter->SharedKey[BSS0][keyIdx].RxMic);
-
-    if (bGTK)
-        // Update ASIC WCID attribute table and IVEIV table
-    	RTMPAddWcidAttributeEntry(pAdapter,
-    							  BSS0,
-    							  keyIdx,
-    							  pAdapter->SharedKey[BSS0][keyIdx].CipherAlg,
-    							  NULL);
-    else
-        // Update ASIC WCID attribute table and IVEIV table
-    	RTMPAddWcidAttributeEntry(pAdapter,
-    							  BSS0,
-    							  keyIdx,
-    							  pAdapter->SharedKey[BSS0][keyIdx].CipherAlg,
-    							  &pAdapter->MacTab.Content[BSSID_WCID]);
-}
-
-int rt_ioctl_siwencodeext(struct net_device *dev,
-			   struct iw_request_info *info,
-			   union iwreq_data *wrqu,
-			   char *extra)
-			{
-    PRTMP_ADAPTER   pAdapter = (PRTMP_ADAPTER) dev->priv;
-	struct iw_point *encoding = &wrqu->encoding;
-	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
-    int keyIdx, alg = ext->alg;
-
-    //check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-  		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-    	return -ENETDOWN;
-	}
-
-    if (encoding->flags & IW_ENCODE_DISABLED)
-	{
-        keyIdx = (encoding->flags & IW_ENCODE_INDEX) - 1;
-        // set BSSID wcid entry of the Pair-wise Key table as no-security mode
-	    AsicRemovePairwiseKeyEntry(pAdapter, BSS0, BSSID_WCID);
-        pAdapter->SharedKey[BSS0][keyIdx].KeyLen = 0;
-		pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CIPHER_NONE;
-		AsicRemoveSharedKeyEntry(pAdapter, 0, (UCHAR)keyIdx);
-        NdisZeroMemory(&pAdapter->SharedKey[BSS0][keyIdx], sizeof(CIPHER_KEY));
-        DBGPRINT(RT_DEBUG_TRACE, ("%s::Remove all keys!(encoding->flags = %x)\n", __func__, encoding->flags));
-    }
-					else
-    {
-        // Get Key Index and convet to our own defined key index
-    	keyIdx = (encoding->flags & IW_ENCODE_INDEX) - 1;
-    	if((keyIdx < 0) || (keyIdx >= NR_WEP_KEYS))
-    		return -EINVAL;
-
-        if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)
-        {
-            pAdapter->StaCfg.DefaultKeyId = keyIdx;
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::DefaultKeyId = %d\n", __func__, pAdapter->StaCfg.DefaultKeyId));
-        }
-
-        switch (alg) {
-    		case IW_ENCODE_ALG_NONE:
-                DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_ENCODE_ALG_NONE\n", __func__));
-    			break;
-    		case IW_ENCODE_ALG_WEP:
-                DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_ENCODE_ALG_WEP - ext->key_len = %d, keyIdx = %d\n", __func__, ext->key_len, keyIdx));
-    			if (ext->key_len == MAX_WEP_KEY_SIZE)
-                {
-        			pAdapter->SharedKey[BSS0][keyIdx].KeyLen = MAX_WEP_KEY_SIZE;
-                    pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CIPHER_WEP128;
-				}
-        		else if (ext->key_len == MIN_WEP_KEY_SIZE)
-                {
-                    pAdapter->SharedKey[BSS0][keyIdx].KeyLen = MIN_WEP_KEY_SIZE;
-                    pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CIPHER_WEP64;
-			}
-        		else
-                    return -EINVAL;
-
-                NdisZeroMemory(pAdapter->SharedKey[BSS0][keyIdx].Key,  16);
-			    NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, ext->key, ext->key_len);
-    			break;
-            case IW_ENCODE_ALG_TKIP:
-                DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_ENCODE_ALG_TKIP - keyIdx = %d, ext->key_len = %d\n", __func__, keyIdx, ext->key_len));
-                if (ext->key_len == 32)
-                {
-                    if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)
-                    {
-                        fnSetCipherKey(pAdapter, keyIdx, CIPHER_TKIP, FALSE, ext);
-                        if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA2)
-                        {
-                            //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-                            STA_PORT_SECURED(pAdapter);
-                        }
-		}
-                    else if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY)
-                    {
-                        fnSetCipherKey(pAdapter, keyIdx, CIPHER_TKIP, TRUE, ext);
-
-                        // set 802.1x port control
-            	        //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-            	        STA_PORT_SECURED(pAdapter);
-                    }
-                }
-                else
-                    return -EINVAL;
-                break;
-            case IW_ENCODE_ALG_CCMP:
-                if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)
-		{
-                    fnSetCipherKey(pAdapter, keyIdx, CIPHER_AES, FALSE, ext);
-                    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA2)
-                    	//pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-                    	STA_PORT_SECURED(pAdapter);
-                }
-                else if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY)
-                {
-                    fnSetCipherKey(pAdapter, keyIdx, CIPHER_AES, TRUE, ext);
-
-                    // set 802.1x port control
-        	        //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-        	        STA_PORT_SECURED(pAdapter);
-                }
-                break;
-    		default:
-    			return -EINVAL;
-		}
-    }
-
-    return 0;
-}
-
-int
-rt_ioctl_giwencodeext(struct net_device *dev,
-			  struct iw_request_info *info,
-			  union iwreq_data *wrqu, char *extra)
-{
-	PRTMP_ADAPTER pAd = (PRTMP_ADAPTER) dev->priv;
-	PCHAR pKey = NULL;
-	struct iw_point *encoding = &wrqu->encoding;
-	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
-	int idx, max_key_len;
-
-	DBGPRINT(RT_DEBUG_TRACE ,("===> rt_ioctl_giwencodeext\n"));
-
-	max_key_len = encoding->length - sizeof(*ext);
-	if (max_key_len < 0)
-		return -EINVAL;
-
-	idx = encoding->flags & IW_ENCODE_INDEX;
-	if (idx)
-	{
-		if (idx < 1 || idx > 4)
-			return -EINVAL;
-		idx--;
-
-		if ((pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled) ||
-			(pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled))
-		{
-			if (idx != pAd->StaCfg.DefaultKeyId)
-			{
-				ext->key_len = 0;
-				return 0;
-			}
-		}
-	}
-	else
-		idx = pAd->StaCfg.DefaultKeyId;
-
-	encoding->flags = idx + 1;
-	memset(ext, 0, sizeof(*ext));
-
-	ext->key_len = 0;
-	switch(pAd->StaCfg.WepStatus) {
-		case Ndis802_11WEPDisabled:
-			ext->alg = IW_ENCODE_ALG_NONE;
-			encoding->flags |= IW_ENCODE_DISABLED;
-			break;
-		case Ndis802_11WEPEnabled:
-			ext->alg = IW_ENCODE_ALG_WEP;
-			if (pAd->SharedKey[BSS0][idx].KeyLen > max_key_len)
-				return -E2BIG;
-			else
-			{
-				ext->key_len = pAd->SharedKey[BSS0][idx].KeyLen;
-				pKey = &(pAd->SharedKey[BSS0][idx].Key[0]);
-			}
-			break;
-		case Ndis802_11Encryption2Enabled:
-		case Ndis802_11Encryption3Enabled:
-			if (pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled)
-				ext->alg = IW_ENCODE_ALG_TKIP;
-			else
-				ext->alg = IW_ENCODE_ALG_CCMP;
-
-			if (max_key_len < 32)
-				return -E2BIG;
-			else
-			{
-				ext->key_len = 32;
-				pKey = &pAd->StaCfg.PMK[0];
-			}
-			break;
-		default:
-			return -EINVAL;
-	}
-
-	if (ext->key_len && pKey)
-	{
-		encoding->flags |= IW_ENCODE_ENABLED;
-		memcpy(ext->key, pKey, ext->key_len);
-	}
-
-	return 0;
-}
-
-#ifdef SIOCSIWGENIE
-int rt_ioctl_siwgenie(struct net_device *dev,
-			  struct iw_request_info *info,
-			  union iwreq_data *wrqu, char *extra)
-{
-	PRTMP_ADAPTER   pAd = (PRTMP_ADAPTER) dev->priv;
-
-	if (wrqu->data.length > MAX_LEN_OF_RSNIE ||
-	    (wrqu->data.length && extra == NULL))
-		return -EINVAL;
-
-	if (wrqu->data.length)
-	{
-		pAd->StaCfg.RSNIE_Len = wrqu->data.length;
-		NdisMoveMemory(&pAd->StaCfg.RSN_IE[0], extra, pAd->StaCfg.RSNIE_Len);
-	}
-	else
-	{
-		pAd->StaCfg.RSNIE_Len = 0;
-		NdisZeroMemory(&pAd->StaCfg.RSN_IE[0], MAX_LEN_OF_RSNIE);
-	}
-
-	return 0;
-}
-#endif // SIOCSIWGENIE //
-
-int rt_ioctl_giwgenie(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-	PRTMP_ADAPTER   pAd = (PRTMP_ADAPTER) dev->priv;
-
-	if ((pAd->StaCfg.RSNIE_Len == 0) ||
-		(pAd->StaCfg.AuthMode < Ndis802_11AuthModeWPA))
-	{
-		wrqu->data.length = 0;
-		return 0;
-	}
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-#ifdef SIOCSIWGENIE
-	if (pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE)
-	{
-	if (wrqu->data.length < pAd->StaCfg.RSNIE_Len)
-		return -E2BIG;
-
-	wrqu->data.length = pAd->StaCfg.RSNIE_Len;
-	memcpy(extra, &pAd->StaCfg.RSN_IE[0], pAd->StaCfg.RSNIE_Len);
-	}
-	else
-#endif // SIOCSIWGENIE //
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-	{
-		UCHAR RSNIe = IE_WPA;
-
-		if (wrqu->data.length < (pAd->StaCfg.RSNIE_Len + 2)) // ID, Len
-			return -E2BIG;
-		wrqu->data.length = pAd->StaCfg.RSNIE_Len + 2;
-
-		if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK) ||
-            (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2))
-			RSNIe = IE_RSN;
-
-		extra[0] = (char)RSNIe;
-		extra[1] = pAd->StaCfg.RSNIE_Len;
-		memcpy(extra+2, &pAd->StaCfg.RSN_IE[0], pAd->StaCfg.RSNIE_Len);
-	}
-
-	return 0;
-}
-
-int rt_ioctl_siwpmksa(struct net_device *dev,
-			   struct iw_request_info *info,
-			   union iwreq_data *wrqu,
-			   char *extra)
-{
-	PRTMP_ADAPTER   pAd = (PRTMP_ADAPTER) dev->priv;
-	struct iw_pmksa *pPmksa = (struct iw_pmksa *)wrqu->data.pointer;
-	INT	CachedIdx = 0, idx = 0;
-
-	if (pPmksa == NULL)
-		return -EINVAL;
-
-	DBGPRINT(RT_DEBUG_TRACE ,("===> rt_ioctl_siwpmksa\n"));
-	switch(pPmksa->cmd)
-	{
-		case IW_PMKSA_FLUSH:
-			NdisZeroMemory(pAd->StaCfg.SavedPMK, sizeof(BSSID_INFO)*PMKID_NO);
-			DBGPRINT(RT_DEBUG_TRACE ,("rt_ioctl_siwpmksa - IW_PMKSA_FLUSH\n"));
-			break;
-		case IW_PMKSA_REMOVE:
-			for (CachedIdx = 0; CachedIdx < pAd->StaCfg.SavedPMKNum; CachedIdx++)
-			{
-		        // compare the BSSID
-		        if (NdisEqualMemory(pPmksa->bssid.sa_data, pAd->StaCfg.SavedPMK[CachedIdx].BSSID, MAC_ADDR_LEN))
-		        {
-		        	NdisZeroMemory(pAd->StaCfg.SavedPMK[CachedIdx].BSSID, MAC_ADDR_LEN);
-					NdisZeroMemory(pAd->StaCfg.SavedPMK[CachedIdx].PMKID, 16);
-					for (idx = CachedIdx; idx < (pAd->StaCfg.SavedPMKNum - 1); idx++)
-					{
-						NdisMoveMemory(&pAd->StaCfg.SavedPMK[idx].BSSID[0], &pAd->StaCfg.SavedPMK[idx+1].BSSID[0], MAC_ADDR_LEN);
-						NdisMoveMemory(&pAd->StaCfg.SavedPMK[idx].PMKID[0], &pAd->StaCfg.SavedPMK[idx+1].PMKID[0], 16);
-					}
-					pAd->StaCfg.SavedPMKNum--;
-			        break;
-		        }
-	        }
-
-			DBGPRINT(RT_DEBUG_TRACE ,("rt_ioctl_siwpmksa - IW_PMKSA_REMOVE\n"));
-			break;
-		case IW_PMKSA_ADD:
-			for (CachedIdx = 0; CachedIdx < pAd->StaCfg.SavedPMKNum; CachedIdx++)
-			{
-		        // compare the BSSID
-		        if (NdisEqualMemory(pPmksa->bssid.sa_data, pAd->StaCfg.SavedPMK[CachedIdx].BSSID, MAC_ADDR_LEN))
-			        break;
-	        }
-
-	        // Found, replace it
-	        if (CachedIdx < PMKID_NO)
-	        {
-		        DBGPRINT(RT_DEBUG_OFF, ("Update PMKID, idx = %d\n", CachedIdx));
-		        NdisMoveMemory(&pAd->StaCfg.SavedPMK[CachedIdx].BSSID[0], pPmksa->bssid.sa_data, MAC_ADDR_LEN);
-				NdisMoveMemory(&pAd->StaCfg.SavedPMK[CachedIdx].PMKID[0], pPmksa->pmkid, 16);
-		        pAd->StaCfg.SavedPMKNum++;
-	        }
-	        // Not found, replace the last one
-	        else
-	        {
-		        // Randomly replace one
-		        CachedIdx = (pPmksa->bssid.sa_data[5] % PMKID_NO);
-		        DBGPRINT(RT_DEBUG_OFF, ("Update PMKID, idx = %d\n", CachedIdx));
-		        NdisMoveMemory(&pAd->StaCfg.SavedPMK[CachedIdx].BSSID[0], pPmksa->bssid.sa_data, MAC_ADDR_LEN);
-				NdisMoveMemory(&pAd->StaCfg.SavedPMK[CachedIdx].PMKID[0], pPmksa->pmkid, 16);
-	        }
-
-			DBGPRINT(RT_DEBUG_TRACE ,("rt_ioctl_siwpmksa - IW_PMKSA_ADD\n"));
-			break;
-		default:
-			DBGPRINT(RT_DEBUG_TRACE ,("rt_ioctl_siwpmksa - Unknow Command!!\n"));
-			break;
-	}
-
-	return 0;
-}
-#endif // #if WIRELESS_EXT > 17
-
-#ifdef DBG
-static int
-rt_private_ioctl_bbp(struct net_device *dev, struct iw_request_info *info,
-		struct iw_point *wrq, char *extra)
-			{
-	CHAR				*this_char;
-	CHAR				*value = NULL;
-	UCHAR				regBBP = 0;
-//	CHAR				arg[255]={0};
-	UINT32				bbpId;
-	UINT32				bbpValue;
-	BOOLEAN				bIsPrintAllBBP = FALSE;
-	INT					Status = 0;
-    PRTMP_ADAPTER       pAdapter = (PRTMP_ADAPTER) dev->priv;
-
-
-	memset(extra, 0x00, IW_PRIV_SIZE_MASK);
-
-	if (wrq->length > 1) //No parameters.
-				{
-		sprintf(extra, "\n");
-
-		//Parsing Read or Write
-		this_char = wrq->pointer;
-		DBGPRINT(RT_DEBUG_TRACE, ("this_char=%s\n", this_char));
-		if (!*this_char)
-			goto next;
-
-		if ((value = rtstrchr(this_char, '=')) != NULL)
-			*value++ = 0;
-
-		if (!value || !*value)
-		{ //Read
-			DBGPRINT(RT_DEBUG_TRACE, ("this_char=%s, value=%s\n", this_char, value));
-			if (sscanf(this_char, "%d", &(bbpId)) == 1)
-			{
-				if (bbpId <= 136)
-				{
-#ifdef RALINK_ATE
-					if (ATE_ON(pAdapter))
-					{
-						ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-					}
-					else
-#endif // RALINK_ATE //
-					{
-					RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-					}
-					sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X\n", bbpId, bbpId*2, regBBP);
-                    wrq->length = strlen(extra) + 1; // 1: size of '\0'
-					DBGPRINT(RT_DEBUG_TRACE, ("msg=%s\n", extra));
-				}
-				else
-				{//Invalid parametes, so default printk all bbp
-					bIsPrintAllBBP = TRUE;
-					goto next;
-				}
-			}
-			else
-			{ //Invalid parametes, so default printk all bbp
-				bIsPrintAllBBP = TRUE;
-				goto next;
-			}
-		}
-		else
-		{ //Write
-			if ((sscanf(this_char, "%d", &(bbpId)) == 1) && (sscanf(value, "%x", &(bbpValue)) == 1))
-			{
-				if (bbpId <= 136)
-				{
-#ifdef RALINK_ATE
-					if (ATE_ON(pAdapter))
-					{
-						ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, bbpId, bbpValue);
-						//Read it back for showing
-						ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-					}
-					else
-#endif // RALINK_ATE //
-					{
-					    RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, bbpId, bbpValue);
-    					//Read it back for showing
-    					RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-			}
-					sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X\n", bbpId, bbpId*2, regBBP);
-                    wrq->length = strlen(extra) + 1; // 1: size of '\0'
-					DBGPRINT(RT_DEBUG_TRACE, ("msg=%s\n", extra));
-				}
-				else
-				{//Invalid parametes, so default printk all bbp
-					bIsPrintAllBBP = TRUE;
-					goto next;
-				}
-			}
-			else
-			{ //Invalid parametes, so default printk all bbp
-				bIsPrintAllBBP = TRUE;
-				goto next;
-			}
-		}
-		}
-	else
-		bIsPrintAllBBP = TRUE;
-
-next:
-	if (bIsPrintAllBBP)
-	{
-		memset(extra, 0x00, IW_PRIV_SIZE_MASK);
-		sprintf(extra, "\n");
-		for (bbpId = 0; bbpId <= 136; bbpId++)
-		{
-		    if (strlen(extra) >= (IW_PRIV_SIZE_MASK - 10))
-                break;
-#ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-			}
-			else
-#endif // RALINK_ATE //
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-			sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X    ", bbpId, bbpId*2, regBBP);
-			if (bbpId%5 == 4)
-				sprintf(extra+strlen(extra), "\n");
-		}
-
-        wrq->length = strlen(extra) + 1; // 1: size of '\0'
-        DBGPRINT(RT_DEBUG_TRACE, ("wrq->length = %d\n", wrq->length));
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<==rt_private_ioctl_bbp\n\n"));
-
-    return Status;
-}
-#endif // DBG //
-
-int rt_ioctl_siwrate(struct net_device *dev,
-			struct iw_request_info *info,
-			union iwreq_data *wrqu, char *extra)
-{
-    PRTMP_ADAPTER   pAd = (PRTMP_ADAPTER) dev->priv;
-    UINT32          rate = wrqu->bitrate.value, fixed = wrqu->bitrate.fixed;
-
-    //check if the interface is down
-	if(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-  		DBGPRINT(RT_DEBUG_TRACE, ("rt_ioctl_siwrate::Network is down!\n"));
-    	return -ENETDOWN;
-	}
-
-    DBGPRINT(RT_DEBUG_TRACE, ("rt_ioctl_siwrate::(rate = %d, fixed = %d)\n", rate, fixed));
-    /* rate = -1 => auto rate
-       rate = X, fixed = 1 => (fixed rate X)
-    */
-    if (rate == -1)
-    {
-		//Auto Rate
-		pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
-		pAd->StaCfg.bAutoTxRateSwitch = TRUE;
-		if ((pAd->CommonCfg.PhyMode <= PHY_11G) ||
-		    (pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE <= MODE_OFDM))
-			RTMPSetDesiredRates(pAd, -1);
-
-#ifdef DOT11_N_SUPPORT
-		SetCommonHT(pAd);
-#endif // DOT11_N_SUPPORT //
-    }
-    else
-    {
-        if (fixed)
-        {
-        	pAd->StaCfg.bAutoTxRateSwitch = FALSE;
-            if ((pAd->CommonCfg.PhyMode <= PHY_11G) ||
-                (pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE <= MODE_OFDM))
-                RTMPSetDesiredRates(pAd, rate);
-            else
-            {
-                pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
-#ifdef DOT11_N_SUPPORT
-                SetCommonHT(pAd);
-#endif // DOT11_N_SUPPORT //
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("rt_ioctl_siwrate::(HtMcs=%d)\n",pAd->StaCfg.DesiredTransmitSetting.field.MCS));
-        }
-        else
-        {
-            // TODO: rate = X, fixed = 0 => (rates <= X)
-            return -EOPNOTSUPP;
-        }
-    }
-
-    return 0;
-}
-
-int rt_ioctl_giwrate(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-    PRTMP_ADAPTER   pAd = (PRTMP_ADAPTER) dev->priv;
-    int rate_index = 0, rate_count = 0;
-    HTTRANSMIT_SETTING ht_setting;
-    __s32 ralinkrate[] =
-	{2,  4,   11,  22, // CCK
-	12, 18,   24,  36, 48, 72, 96, 108, // OFDM
-	13, 26,   39,  52,  78, 104, 117, 130, 26,  52,  78, 104, 156, 208, 234, 260, // 20MHz, 800ns GI, MCS: 0 ~ 15
-	39, 78,  117, 156, 234, 312, 351, 390,										  // 20MHz, 800ns GI, MCS: 16 ~ 23
-	27, 54,   81, 108, 162, 216, 243, 270, 54, 108, 162, 216, 324, 432, 486, 540, // 40MHz, 800ns GI, MCS: 0 ~ 15
-	81, 162, 243, 324, 486, 648, 729, 810,										  // 40MHz, 800ns GI, MCS: 16 ~ 23
-	14, 29,   43,  57,  87, 115, 130, 144, 29, 59,   87, 115, 173, 230, 260, 288, // 20MHz, 400ns GI, MCS: 0 ~ 15
-	43, 87,  130, 173, 260, 317, 390, 433,										  // 20MHz, 400ns GI, MCS: 16 ~ 23
-	30, 60,   90, 120, 180, 240, 270, 300, 60, 120, 180, 240, 360, 480, 540, 600, // 40MHz, 400ns GI, MCS: 0 ~ 15
-	90, 180, 270, 360, 540, 720, 810, 900};										  // 40MHz, 400ns GI, MCS: 16 ~ 23
-
-    rate_count = sizeof(ralinkrate)/sizeof(__s32);
-    //check if the interface is down
-	if(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-  		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-    	return -ENETDOWN;
-	}
-
-    if ((pAd->StaCfg.bAutoTxRateSwitch == FALSE) &&
-        (INFRA_ON(pAd)) &&
-        ((pAd->CommonCfg.PhyMode <= PHY_11G) || (pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE <= MODE_OFDM)))
-        ht_setting.word = pAd->StaCfg.HTPhyMode.word;
-    else
-        ht_setting.word = pAd->MacTab.Content[BSSID_WCID].HTPhyMode.word;
-
-#ifdef DOT11_N_SUPPORT
-    if (ht_setting.field.MODE >= MODE_HTMIX)
-    {
-//    	rate_index = 12 + ((UCHAR)ht_setting.field.BW *16) + ((UCHAR)ht_setting.field.ShortGI *32) + ((UCHAR)ht_setting.field.MCS);
-    	rate_index = 12 + ((UCHAR)ht_setting.field.BW *24) + ((UCHAR)ht_setting.field.ShortGI *48) + ((UCHAR)ht_setting.field.MCS);
-    }
-    else
-#endif // DOT11_N_SUPPORT //
-    if (ht_setting.field.MODE == MODE_OFDM)
-    	rate_index = (UCHAR)(ht_setting.field.MCS) + 4;
-    else if (ht_setting.field.MODE == MODE_CCK)
-    	rate_index = (UCHAR)(ht_setting.field.MCS);
-
-    if (rate_index < 0)
-        rate_index = 0;
-
-    if (rate_index > rate_count)
-        rate_index = rate_count;
-
-    wrqu->bitrate.value = ralinkrate[rate_index] * 500000;
-    wrqu->bitrate.disabled = 0;
-
-    return 0;
-}
-
-static const iw_handler rt_handler[] =
-{
-	(iw_handler) NULL,			            /* SIOCSIWCOMMIT */
-	(iw_handler) rt_ioctl_giwname,			/* SIOCGIWNAME   */
-	(iw_handler) NULL,			            /* SIOCSIWNWID   */
-	(iw_handler) NULL,			            /* SIOCGIWNWID   */
-	(iw_handler) rt_ioctl_siwfreq,		    /* SIOCSIWFREQ   */
-	(iw_handler) rt_ioctl_giwfreq,		    /* SIOCGIWFREQ   */
-	(iw_handler) rt_ioctl_siwmode,		    /* SIOCSIWMODE   */
-	(iw_handler) rt_ioctl_giwmode,		    /* SIOCGIWMODE   */
-	(iw_handler) NULL,		                /* SIOCSIWSENS   */
-	(iw_handler) NULL,		                /* SIOCGIWSENS   */
-	(iw_handler) NULL /* not used */,		/* SIOCSIWRANGE  */
-	(iw_handler) rt_ioctl_giwrange,		    /* SIOCGIWRANGE  */
-	(iw_handler) NULL /* not used */,		/* SIOCSIWPRIV   */
-	(iw_handler) NULL /* kernel code */,    /* SIOCGIWPRIV   */
-	(iw_handler) NULL /* not used */,		/* SIOCSIWSTATS  */
-	(iw_handler) rt28xx_get_wireless_stats /* kernel code */,    /* SIOCGIWSTATS  */
-	(iw_handler) NULL,		                /* SIOCSIWSPY    */
-	(iw_handler) NULL,		                /* SIOCGIWSPY    */
-	(iw_handler) NULL,				        /* SIOCSIWTHRSPY */
-	(iw_handler) NULL,				        /* SIOCGIWTHRSPY */
-	(iw_handler) rt_ioctl_siwap,            /* SIOCSIWAP     */
-	(iw_handler) rt_ioctl_giwap,		    /* SIOCGIWAP     */
-#ifdef SIOCSIWMLME
-	(iw_handler) rt_ioctl_siwmlme,	        /* SIOCSIWMLME   */
-#else
-	(iw_handler) NULL,				        /* SIOCSIWMLME */
-#endif // SIOCSIWMLME //
-	(iw_handler) rt_ioctl_iwaplist,		    /* SIOCGIWAPLIST */
-#ifdef SIOCGIWSCAN
-	(iw_handler) rt_ioctl_siwscan,		    /* SIOCSIWSCAN   */
-	(iw_handler) rt_ioctl_giwscan,		    /* SIOCGIWSCAN   */
-#else
-	(iw_handler) NULL,				        /* SIOCSIWSCAN   */
-	(iw_handler) NULL,				        /* SIOCGIWSCAN   */
-#endif /* SIOCGIWSCAN */
-	(iw_handler) rt_ioctl_siwessid,		    /* SIOCSIWESSID  */
-	(iw_handler) rt_ioctl_giwessid,		    /* SIOCGIWESSID  */
-	(iw_handler) rt_ioctl_siwnickn,		    /* SIOCSIWNICKN  */
-	(iw_handler) rt_ioctl_giwnickn,		    /* SIOCGIWNICKN  */
-	(iw_handler) NULL,				        /* -- hole --    */
-	(iw_handler) NULL,				        /* -- hole --    */
-	(iw_handler) rt_ioctl_siwrate,          /* SIOCSIWRATE   */
-	(iw_handler) rt_ioctl_giwrate,          /* SIOCGIWRATE   */
-	(iw_handler) rt_ioctl_siwrts,		    /* SIOCSIWRTS    */
-	(iw_handler) rt_ioctl_giwrts,		    /* SIOCGIWRTS    */
-	(iw_handler) rt_ioctl_siwfrag,		    /* SIOCSIWFRAG   */
-	(iw_handler) rt_ioctl_giwfrag,		    /* SIOCGIWFRAG   */
-	(iw_handler) NULL,		                /* SIOCSIWTXPOW  */
-	(iw_handler) NULL,		                /* SIOCGIWTXPOW  */
-	(iw_handler) NULL,		                /* SIOCSIWRETRY  */
-	(iw_handler) NULL,		                /* SIOCGIWRETRY  */
-	(iw_handler) rt_ioctl_siwencode,		/* SIOCSIWENCODE */
-	(iw_handler) rt_ioctl_giwencode,		/* SIOCGIWENCODE */
-	(iw_handler) NULL,		                /* SIOCSIWPOWER  */
-	(iw_handler) NULL,		                /* SIOCGIWPOWER  */
-	(iw_handler) NULL,						/* -- hole -- */
-	(iw_handler) NULL,						/* -- hole -- */
-#if WIRELESS_EXT > 17
-    (iw_handler) rt_ioctl_siwgenie,         /* SIOCSIWGENIE  */
-	(iw_handler) rt_ioctl_giwgenie,         /* SIOCGIWGENIE  */
-	(iw_handler) rt_ioctl_siwauth,		    /* SIOCSIWAUTH   */
-	(iw_handler) rt_ioctl_giwauth,		    /* SIOCGIWAUTH   */
-	(iw_handler) rt_ioctl_siwencodeext,	    /* SIOCSIWENCODEEXT */
-	(iw_handler) rt_ioctl_giwencodeext,		/* SIOCGIWENCODEEXT */
-	(iw_handler) rt_ioctl_siwpmksa,         /* SIOCSIWPMKSA  */
-#endif
-};
-
-static const iw_handler rt_priv_handlers[] = {
-	(iw_handler) NULL, /* + 0x00 */
-	(iw_handler) NULL, /* + 0x01 */
-#ifndef CONFIG_AP_SUPPORT
-	(iw_handler) rt_ioctl_setparam, /* + 0x02 */
-#else
-	(iw_handler) NULL, /* + 0x02 */
-#endif // CONFIG_AP_SUPPORT //
-#ifdef DBG
-	(iw_handler) rt_private_ioctl_bbp, /* + 0x03 */
-#else
-	(iw_handler) NULL, /* + 0x03 */
-#endif
-	(iw_handler) NULL, /* + 0x04 */
-	(iw_handler) NULL, /* + 0x05 */
-	(iw_handler) NULL, /* + 0x06 */
-	(iw_handler) NULL, /* + 0x07 */
-	(iw_handler) NULL, /* + 0x08 */
-	(iw_handler) rt_private_get_statistics, /* + 0x09 */
-	(iw_handler) NULL, /* + 0x0A */
-	(iw_handler) NULL, /* + 0x0B */
-	(iw_handler) NULL, /* + 0x0C */
-	(iw_handler) NULL, /* + 0x0D */
-	(iw_handler) NULL, /* + 0x0E */
-	(iw_handler) NULL, /* + 0x0F */
-	(iw_handler) NULL, /* + 0x10 */
-	(iw_handler) rt_private_show, /* + 0x11 */
-    (iw_handler) NULL, /* + 0x12 */
-	(iw_handler) NULL, /* + 0x13 */
-	(iw_handler) NULL, /* + 0x15 */
-	(iw_handler) NULL, /* + 0x17 */
-	(iw_handler) NULL, /* + 0x18 */
-};
-
-const struct iw_handler_def rt28xx_iw_handler_def =
-{
-#define	N(a)	(sizeof (a) / sizeof (a[0]))
-	.standard	= (iw_handler *) rt_handler,
-	.num_standard	= sizeof(rt_handler) / sizeof(iw_handler),
-	.private	= (iw_handler *) rt_priv_handlers,
-	.num_private		= N(rt_priv_handlers),
-	.private_args	= (struct iw_priv_args *) privtab,
-	.num_private_args	= N(privtab),
-#if IW_HANDLER_VERSION >= 7
-    .get_wireless_stats = rt28xx_get_wireless_stats,
-#endif
-};
-
-INT RTMPSetInformation(
-    IN  PRTMP_ADAPTER pAdapter,
-    IN  OUT struct ifreq    *rq,
-    IN  INT                 cmd)
-{
-    struct iwreq                        *wrq = (struct iwreq *) rq;
-    NDIS_802_11_SSID                    Ssid;
-    NDIS_802_11_MAC_ADDRESS             Bssid;
-    RT_802_11_PHY_MODE                  PhyMode;
-    RT_802_11_STA_CONFIG                StaConfig;
-    NDIS_802_11_RATES                   aryRates;
-    RT_802_11_PREAMBLE                  Preamble;
-    NDIS_802_11_WEP_STATUS              WepStatus;
-    NDIS_802_11_AUTHENTICATION_MODE     AuthMode = Ndis802_11AuthModeMax;
-    NDIS_802_11_NETWORK_INFRASTRUCTURE  BssType;
-    NDIS_802_11_RTS_THRESHOLD           RtsThresh;
-    NDIS_802_11_FRAGMENTATION_THRESHOLD FragThresh;
-    NDIS_802_11_POWER_MODE              PowerMode;
-    PNDIS_802_11_KEY                    pKey = NULL;
-    PNDIS_802_11_WEP			        pWepKey =NULL;
-    PNDIS_802_11_REMOVE_KEY             pRemoveKey = NULL;
-    NDIS_802_11_CONFIGURATION           Config, *pConfig = NULL;
-    NDIS_802_11_NETWORK_TYPE            NetType;
-    ULONG                               Now;
-    UINT                                KeyIdx = 0;
-    INT                                 Status = NDIS_STATUS_SUCCESS, MaxPhyMode = PHY_11G;
-    ULONG                               PowerTemp;
-    BOOLEAN                             RadioState;
-    BOOLEAN                             StateMachineTouched = FALSE;
-#ifdef DOT11_N_SUPPORT
-	OID_SET_HT_PHYMODE					HT_PhyMode;	//11n ,kathy
-#endif // DOT11_N_SUPPORT //
-#ifdef WPA_SUPPLICANT_SUPPORT
-    PNDIS_802_11_PMKID                  pPmkId = NULL;
-    BOOLEAN				                IEEE8021xState = FALSE;
-    BOOLEAN				                IEEE8021x_required_keys = FALSE;
-    UCHAR                               wpa_supplicant_enable = 0;
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef SNMP_SUPPORT
-	TX_RTY_CFG_STRUC			tx_rty_cfg;
-	ULONG						ShortRetryLimit, LongRetryLimit;
-	UCHAR						ctmp;
-#endif // SNMP_SUPPORT //
-
-
-
-#ifdef DOT11_N_SUPPORT
-	MaxPhyMode = PHY_11N_5G;
-#endif // DOT11_N_SUPPORT //
-
-
-	DBGPRINT(RT_DEBUG_TRACE, ("-->RTMPSetInformation(),	0x%08x\n", cmd&0x7FFF));
-    switch(cmd & 0x7FFF) {
-        case RT_OID_802_11_COUNTRY_REGION:
-            if (wrq->u.data.length < sizeof(UCHAR))
-                Status = -EINVAL;
-			// Only avaliable when EEPROM not programming
-            else if (!(pAdapter->CommonCfg.CountryRegion & 0x80) && !(pAdapter->CommonCfg.CountryRegionForABand & 0x80))
-            {
-                ULONG   Country;
-                UCHAR	TmpPhy;
-
-				Status = copy_from_user(&Country, wrq->u.data.pointer, wrq->u.data.length);
-				pAdapter->CommonCfg.CountryRegion = (UCHAR)(Country & 0x000000FF);
-				pAdapter->CommonCfg.CountryRegionForABand = (UCHAR)((Country >> 8) & 0x000000FF);
-                TmpPhy = pAdapter->CommonCfg.PhyMode;
-				pAdapter->CommonCfg.PhyMode = 0xff;
-				// Build all corresponding channel information
-				RTMPSetPhyMode(pAdapter, TmpPhy);
-#ifdef DOT11_N_SUPPORT
-				SetCommonHT(pAdapter);
-#endif // DOT11_N_SUPPORT //
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_COUNTRY_REGION (A:%d  B/G:%d)\n", pAdapter->CommonCfg.CountryRegionForABand,
-				    pAdapter->CommonCfg.CountryRegion));
-            }
-            break;
-        case OID_802_11_BSSID_LIST_SCAN:
- #ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				break;
-			}
-#endif // RALINK_ATE //
-            Now = jiffies;
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_BSSID_LIST_SCAN, TxCnt = %d \n", pAdapter->RalinkCounters.LastOneSecTotalTxCount));
-
-            if (MONITOR_ON(pAdapter))
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("!!! Driver is in Monitor Mode now !!!\n"));
-                break;
-            }
-
-			//Benson add 20080527, when radio off, sta don't need to scan
-			if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_RADIO_OFF))
-				break;
-
-			if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-			{
-                DBGPRINT(RT_DEBUG_TRACE, ("!!! Driver is scanning now !!!\n"));
-				pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE;
-				Status = NDIS_STATUS_SUCCESS;
-                break;
-            }
-
-			if (pAdapter->RalinkCounters.LastOneSecTotalTxCount > 100)
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("!!! Link UP, ignore this set::OID_802_11_BSSID_LIST_SCAN\n"));
-				Status = NDIS_STATUS_SUCCESS;
-				pAdapter->StaCfg.ScanCnt = 99;		// Prevent auto scan triggered by this OID
-				break;
-            }
-
-            if ((OPSTATUS_TEST_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED)) &&
-				((pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA) ||
-				(pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
-				(pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) ||
-				(pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)) &&
-                (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("!!! Link UP, Port Not Secured! ignore this set::OID_802_11_BSSID_LIST_SCAN\n"));
-				Status = NDIS_STATUS_SUCCESS;
-				pAdapter->StaCfg.ScanCnt = 99;		// Prevent auto scan triggered by this OID
-				break;
-            }
-
-
-            if (pAdapter->Mlme.CntlMachine.CurrState != CNTL_IDLE)
-            {
-                RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-                DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
-            }
-
-            // tell CNTL state machine to call NdisMSetInformationComplete() after completing
-            // this request, because this request is initiated by NDIS.
-            pAdapter->MlmeAux.CurrReqIsFromNdis = FALSE;
-            // Reset allowed scan retries
-            pAdapter->StaCfg.ScanCnt = 0;
-            pAdapter->StaCfg.LastScanTime = Now;
-
-			pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE;
-            RTMP_SET_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
-            MlmeEnqueue(pAdapter,
-                        MLME_CNTL_STATE_MACHINE,
-                        OID_802_11_BSSID_LIST_SCAN,
-                        0,
-                        NULL);
-
-            Status = NDIS_STATUS_SUCCESS;
-            StateMachineTouched = TRUE;
-            break;
-        case OID_802_11_SSID:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_SSID))
-                Status = -EINVAL;
-            else
-            {
-            	PCHAR pSsidString = NULL;
-                Status = copy_from_user(&Ssid, wrq->u.data.pointer, wrq->u.data.length);
-
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_SSID (Len=%d,Ssid=%s)\n", Ssid.SsidLength, Ssid.Ssid));
-                if (Ssid.SsidLength > MAX_LEN_OF_SSID)
-                    Status = -EINVAL;
-                else
-                {
-                	if (Ssid.SsidLength == 0)
-                	{
-                		Set_SSID_Proc(pAdapter, "");
-                	}
-					else
-                	{
-	                	pSsidString = (CHAR *) kmalloc(MAX_LEN_OF_SSID+1, MEM_ALLOC_FLAG);
-						if (pSsidString)
-						{
-							NdisZeroMemory(pSsidString, MAX_LEN_OF_SSID+1);
-							NdisMoveMemory(pSsidString, Ssid.Ssid, Ssid.SsidLength);
-	                		Set_SSID_Proc(pAdapter, pSsidString);
-							kfree(pSsidString);
-						}
-						else
-							Status = -ENOMEM;
-                	}
-                }
-            }
-            break;
-        case OID_802_11_BSSID:
-#ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				break;
-			}
-#endif // RALINK_ATE //
-            if (wrq->u.data.length != sizeof(NDIS_802_11_MAC_ADDRESS))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&Bssid, wrq->u.data.pointer, wrq->u.data.length);
-
-                // tell CNTL state machine to call NdisMSetInformationComplete() after completing
-                // this request, because this request is initiated by NDIS.
-                pAdapter->MlmeAux.CurrReqIsFromNdis = FALSE;
-
-				// Prevent to connect AP again in STAMlmePeriodicExec
-				pAdapter->MlmeAux.AutoReconnectSsidLen= 32;
-
-                // Reset allowed scan retries
-				pAdapter->StaCfg.ScanCnt = 0;
-
-                if (pAdapter->Mlme.CntlMachine.CurrState != CNTL_IDLE)
-                {
-                    RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-                    DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
-                }
-                MlmeEnqueue(pAdapter,
-                            MLME_CNTL_STATE_MACHINE,
-                            OID_802_11_BSSID,
-                            sizeof(NDIS_802_11_MAC_ADDRESS),
-                            (VOID *)&Bssid);
-                Status = NDIS_STATUS_SUCCESS;
-                StateMachineTouched = TRUE;
-
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_BSSID %02x:%02x:%02x:%02x:%02x:%02x\n",
-                                        Bssid[0], Bssid[1], Bssid[2], Bssid[3], Bssid[4], Bssid[5]));
-            }
-            break;
-        case RT_OID_802_11_RADIO:
-            if (wrq->u.data.length != sizeof(BOOLEAN))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&RadioState, wrq->u.data.pointer, wrq->u.data.length);
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_RADIO (=%d)\n", RadioState));
-                if (pAdapter->StaCfg.bSwRadio != RadioState)
-                {
-                    pAdapter->StaCfg.bSwRadio = RadioState;
-                    if (pAdapter->StaCfg.bRadio != (pAdapter->StaCfg.bHwRadio && pAdapter->StaCfg.bSwRadio))
-                    {
-                        pAdapter->StaCfg.bRadio = (pAdapter->StaCfg.bHwRadio && pAdapter->StaCfg.bSwRadio);
-                        if (pAdapter->StaCfg.bRadio == TRUE)
-                        {
-                            MlmeRadioOn(pAdapter);
-                            // Update extra information
-							pAdapter->ExtraInfo = EXTRA_INFO_CLEAR;
-                        }
-                        else
-                        {
-                            MlmeRadioOff(pAdapter);
-                            // Update extra information
-							pAdapter->ExtraInfo = SW_RADIO_OFF;
-                        }
-                    }
-                }
-            }
-            break;
-        case RT_OID_802_11_PHY_MODE:
-            if (wrq->u.data.length != sizeof(RT_802_11_PHY_MODE))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&PhyMode, wrq->u.data.pointer, wrq->u.data.length);
-				if (PhyMode <= MaxPhyMode)
-				{
-                	RTMPSetPhyMode(pAdapter, PhyMode);
-#ifdef DOT11_N_SUPPORT
-					SetCommonHT(pAdapter);
-#endif // DOT11_N_SUPPORT //
-				}
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_PHY_MODE (=%d)\n", PhyMode));
-            }
-            break;
-        case RT_OID_802_11_STA_CONFIG:
-            if (wrq->u.data.length != sizeof(RT_802_11_STA_CONFIG))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&StaConfig, wrq->u.data.pointer, wrq->u.data.length);
-                pAdapter->CommonCfg.bEnableTxBurst = StaConfig.EnableTxBurst;
-                pAdapter->CommonCfg.UseBGProtection = StaConfig.UseBGProtection;
-                pAdapter->CommonCfg.bUseShortSlotTime = 1; // 2003-10-30 always SHORT SLOT capable
-                if ((pAdapter->CommonCfg.PhyMode != StaConfig.AdhocMode) &&
-					(StaConfig.AdhocMode <= MaxPhyMode))
-                {
-                    // allow dynamic change of "USE OFDM rate or not" in ADHOC mode
-                    // if setting changed, need to reset current TX rate as well as BEACON frame format
-                    if (pAdapter->StaCfg.BssType == BSS_ADHOC)
-                    {
-						pAdapter->CommonCfg.PhyMode = StaConfig.AdhocMode;
-                    	RTMPSetPhyMode(pAdapter, PhyMode);
-                        MlmeUpdateTxRates(pAdapter, FALSE, 0);
-                        MakeIbssBeacon(pAdapter);           // re-build BEACON frame
-                        AsicEnableIbssSync(pAdapter);   // copy to on-chip memory
-                    }
-                }
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_STA_CONFIG (Burst=%d, Protection=%ld,ShortSlot=%d\n",
-                                        pAdapter->CommonCfg.bEnableTxBurst,
-                                        pAdapter->CommonCfg.UseBGProtection,
-                                        pAdapter->CommonCfg.bUseShortSlotTime));
-            }
-            break;
-        case OID_802_11_DESIRED_RATES:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_RATES))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&aryRates, wrq->u.data.pointer, wrq->u.data.length);
-                NdisZeroMemory(pAdapter->CommonCfg.DesireRate, MAX_LEN_OF_SUPPORTED_RATES);
-                NdisMoveMemory(pAdapter->CommonCfg.DesireRate, &aryRates, sizeof(NDIS_802_11_RATES));
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_DESIRED_RATES (%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x)\n",
-                    pAdapter->CommonCfg.DesireRate[0],pAdapter->CommonCfg.DesireRate[1],
-                    pAdapter->CommonCfg.DesireRate[2],pAdapter->CommonCfg.DesireRate[3],
-                    pAdapter->CommonCfg.DesireRate[4],pAdapter->CommonCfg.DesireRate[5],
-                    pAdapter->CommonCfg.DesireRate[6],pAdapter->CommonCfg.DesireRate[7] ));
-                // Changing DesiredRate may affect the MAX TX rate we used to TX frames out
-                MlmeUpdateTxRates(pAdapter, FALSE, 0);
-            }
-            break;
-        case RT_OID_802_11_PREAMBLE:
-            if (wrq->u.data.length != sizeof(RT_802_11_PREAMBLE))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&Preamble, wrq->u.data.pointer, wrq->u.data.length);
-                if (Preamble == Rt802_11PreambleShort)
-                {
-                    pAdapter->CommonCfg.TxPreamble = Preamble;
-                    MlmeSetTxPreamble(pAdapter, Rt802_11PreambleShort);
-                }
-                else if ((Preamble == Rt802_11PreambleLong) || (Preamble == Rt802_11PreambleAuto))
-                {
-                    // if user wants AUTO, initialize to LONG here, then change according to AP's
-                    // capability upon association.
-                    pAdapter->CommonCfg.TxPreamble = Preamble;
-                    MlmeSetTxPreamble(pAdapter, Rt802_11PreambleLong);
-                }
-                else
-                {
-                    Status = -EINVAL;
-                    break;
-                }
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_PREAMBLE (=%d)\n", Preamble));
-            }
-            break;
-        case OID_802_11_WEP_STATUS:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_WEP_STATUS))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&WepStatus, wrq->u.data.pointer, wrq->u.data.length);
-                // Since TKIP, AES, WEP are all supported. It should not have any invalid setting
-                if (WepStatus <= Ndis802_11Encryption3KeyAbsent)
-                {
-                    if (pAdapter->StaCfg.WepStatus != WepStatus)
-                    {
-                        // Config has changed
-                        pAdapter->bConfigChanged = TRUE;
-                    }
-                    pAdapter->StaCfg.WepStatus     = WepStatus;
-                    pAdapter->StaCfg.OrigWepStatus = WepStatus;
-                    pAdapter->StaCfg.PairCipher    = WepStatus;
-                	pAdapter->StaCfg.GroupCipher   = WepStatus;
-                }
-                else
-                {
-                    Status  = -EINVAL;
-                    break;
-                }
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_WEP_STATUS (=%d)\n",WepStatus));
-            }
-            break;
-        case OID_802_11_AUTHENTICATION_MODE:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_AUTHENTICATION_MODE))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&AuthMode, wrq->u.data.pointer, wrq->u.data.length);
-                if (AuthMode > Ndis802_11AuthModeMax)
-                {
-                    Status  = -EINVAL;
-                    break;
-                }
-                else
-                {
-                    if (pAdapter->StaCfg.AuthMode != AuthMode)
-                    {
-                        // Config has changed
-                        pAdapter->bConfigChanged = TRUE;
-                    }
-                    pAdapter->StaCfg.AuthMode = AuthMode;
-                }
-                pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_AUTHENTICATION_MODE (=%d) \n",pAdapter->StaCfg.AuthMode));
-            }
-            break;
-        case OID_802_11_INFRASTRUCTURE_MODE:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_NETWORK_INFRASTRUCTURE))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&BssType, wrq->u.data.pointer, wrq->u.data.length);
-
-				if (BssType == Ndis802_11IBSS)
-					Set_NetworkType_Proc(pAdapter, "Adhoc");
-				else if (BssType == Ndis802_11Infrastructure)
-					Set_NetworkType_Proc(pAdapter, "Infra");
-				else if (BssType == Ndis802_11Monitor)
-					Set_NetworkType_Proc(pAdapter, "Monitor");
-				else
-				{
-					Status  = -EINVAL;
-					DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_INFRASTRUCTURE_MODE (unknown)\n"));
-				}
-			}
-			break;
-	 case OID_802_11_REMOVE_WEP:
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_WEP\n"));
-            if (wrq->u.data.length != sizeof(NDIS_802_11_KEY_INDEX))
-            {
-				Status = -EINVAL;
-            }
-            else
-            {
-				KeyIdx = *(NDIS_802_11_KEY_INDEX *) wrq->u.data.pointer;
-
-				if (KeyIdx & 0x80000000)
-				{
-					// Should never set default bit when remove key
-					Status = -EINVAL;
-				}
-				else
-				{
-					KeyIdx = KeyIdx & 0x0fffffff;
-					if (KeyIdx >= 4){
-						Status = -EINVAL;
-					}
-					else
-					{
-						pAdapter->SharedKey[BSS0][KeyIdx].KeyLen = 0;
-						pAdapter->SharedKey[BSS0][KeyIdx].CipherAlg = CIPHER_NONE;
-						AsicRemoveSharedKeyEntry(pAdapter, 0, (UCHAR)KeyIdx);
-					}
-				}
-            }
-            break;
-        case RT_OID_802_11_RESET_COUNTERS:
-            NdisZeroMemory(&pAdapter->WlanCounters, sizeof(COUNTER_802_11));
-            NdisZeroMemory(&pAdapter->Counters8023, sizeof(COUNTER_802_3));
-            NdisZeroMemory(&pAdapter->RalinkCounters, sizeof(COUNTER_RALINK));
-            pAdapter->Counters8023.RxNoBuffer   = 0;
-			pAdapter->Counters8023.GoodReceives = 0;
-			pAdapter->Counters8023.RxNoBuffer   = 0;
-#ifdef RT2870
-			pAdapter->BulkOutComplete	= 0;
-			pAdapter->BulkOutCompleteOther= 0;
-			pAdapter->BulkOutCompleteCancel = 0;
-			pAdapter->BulkOutReq = 0;
-			pAdapter->BulkInReq= 0;
-			pAdapter->BulkInComplete = 0;
-			pAdapter->BulkInCompleteFail = 0;
-#endif // RT2870 //
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_RESET_COUNTERS \n"));
-            break;
-        case OID_802_11_RTS_THRESHOLD:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_RTS_THRESHOLD))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&RtsThresh, wrq->u.data.pointer, wrq->u.data.length);
-                if (RtsThresh > MAX_RTS_THRESHOLD)
-                    Status  = -EINVAL;
-                else
-                    pAdapter->CommonCfg.RtsThreshold = (USHORT)RtsThresh;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_RTS_THRESHOLD (=%ld)\n",RtsThresh));
-            break;
-        case OID_802_11_FRAGMENTATION_THRESHOLD:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_FRAGMENTATION_THRESHOLD))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&FragThresh, wrq->u.data.pointer, wrq->u.data.length);
-                pAdapter->CommonCfg.bUseZeroToDisableFragment = FALSE;
-                if (FragThresh > MAX_FRAG_THRESHOLD || FragThresh < MIN_FRAG_THRESHOLD)
-                {
-                    if (FragThresh == 0)
-                    {
-                        pAdapter->CommonCfg.FragmentThreshold = MAX_FRAG_THRESHOLD;
-                        pAdapter->CommonCfg.bUseZeroToDisableFragment = TRUE;
-                    }
-                    else
-                        Status  = -EINVAL;
-                }
-                else
-                    pAdapter->CommonCfg.FragmentThreshold = (USHORT)FragThresh;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_FRAGMENTATION_THRESHOLD (=%ld) \n",FragThresh));
-            break;
-        case OID_802_11_POWER_MODE:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_POWER_MODE))
-                Status = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&PowerMode, wrq->u.data.pointer, wrq->u.data.length);
-                if (PowerMode == Ndis802_11PowerModeCAM)
-                	Set_PSMode_Proc(pAdapter, "CAM");
-                else if (PowerMode == Ndis802_11PowerModeMAX_PSP)
-                	Set_PSMode_Proc(pAdapter, "Max_PSP");
-                else if (PowerMode == Ndis802_11PowerModeFast_PSP)
-					Set_PSMode_Proc(pAdapter, "Fast_PSP");
-                else if (PowerMode == Ndis802_11PowerModeLegacy_PSP)
-					Set_PSMode_Proc(pAdapter, "Legacy_PSP");
-                else
-                    Status = -EINVAL;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_POWER_MODE (=%d)\n",PowerMode));
-            break;
-         case RT_OID_802_11_TX_POWER_LEVEL_1:
-			if (wrq->u.data.length  < sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&PowerTemp, wrq->u.data.pointer, wrq->u.data.length);
-				if (PowerTemp > 100)
-					PowerTemp = 0xffffffff;  // AUTO
-				pAdapter->CommonCfg.TxPowerDefault = PowerTemp; //keep current setting.
-					pAdapter->CommonCfg.TxPowerPercentage = pAdapter->CommonCfg.TxPowerDefault;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_TX_POWER_LEVEL_1 (=%ld)\n", pAdapter->CommonCfg.TxPowerPercentage));
-			}
-	        break;
-		case OID_802_11_NETWORK_TYPE_IN_USE:
-			if (wrq->u.data.length != sizeof(NDIS_802_11_NETWORK_TYPE))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&NetType, wrq->u.data.pointer, wrq->u.data.length);
-
-				if (NetType == Ndis802_11DS)
-					RTMPSetPhyMode(pAdapter, PHY_11B);
-				else if (NetType == Ndis802_11OFDM24)
-					RTMPSetPhyMode(pAdapter, PHY_11BG_MIXED);
-				else if (NetType == Ndis802_11OFDM5)
-					RTMPSetPhyMode(pAdapter, PHY_11A);
-				else
-					Status = -EINVAL;
-#ifdef DOT11_N_SUPPORT
-				if (Status == NDIS_STATUS_SUCCESS)
-					SetCommonHT(pAdapter);
-#endif // DOT11_N_SUPPORT //
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_NETWORK_TYPE_IN_USE (=%d)\n",NetType));
-		    }
-			break;
-        // For WPA PSK PMK key
-        case RT_OID_802_11_ADD_WPA:
-            pKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-            if(pKey == NULL)
-            {
-                Status = -ENOMEM;
-                break;
-            }
-
-            Status = copy_from_user(pKey, wrq->u.data.pointer, wrq->u.data.length);
-            if (pKey->Length != wrq->u.data.length)
-            {
-                Status  = -EINVAL;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_WPA, Failed!!\n"));
-            }
-            else
-            {
-                if ((pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPAPSK) &&
-				    (pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPA2PSK) &&
-				    (pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPANone) )
-                {
-                    Status = -EOPNOTSUPP;
-                    DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_WPA, Failed!! [AuthMode != WPAPSK/WPA2PSK/WPANONE]\n"));
-                }
-                else if ((pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
-						 (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK) ||
-						 (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPANone) )     // Only for WPA PSK mode
-				{
-                    NdisMoveMemory(pAdapter->StaCfg.PMK, &pKey->KeyMaterial, pKey->KeyLength);
-                    // Use RaConfig as PSK agent.
-                    // Start STA supplicant state machine
-                    if (pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPANone)
-                        pAdapter->StaCfg.WpaState = SS_START;
-
-                    DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_WPA (id=0x%x, Len=%d-byte)\n", pKey->KeyIndex, pKey->KeyLength));
-                }
-                else
-                {
-                    pAdapter->StaCfg.WpaState = SS_NOTUSE;
-                    DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_WPA (id=0x%x, Len=%d-byte)\n", pKey->KeyIndex, pKey->KeyLength));
-                }
-            }
-            kfree(pKey);
-            break;
-        case OID_802_11_REMOVE_KEY:
-            pRemoveKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-            if(pRemoveKey == NULL)
-            {
-                Status = -ENOMEM;
-                break;
-            }
-
-            Status = copy_from_user(pRemoveKey, wrq->u.data.pointer, wrq->u.data.length);
-            if (pRemoveKey->Length != wrq->u.data.length)
-            {
-                Status  = -EINVAL;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY, Failed!!\n"));
-            }
-            else
-            {
-                if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-                {
-                    RTMPWPARemoveKeyProc(pAdapter, pRemoveKey);
-                    DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY, Remove WPA Key!!\n"));
-                }
-                else
-                {
-                    KeyIdx = pRemoveKey->KeyIndex;
-
-                    if (KeyIdx & 0x80000000)
-                    {
-                        // Should never set default bit when remove key
-                        Status  = -EINVAL;
-                        DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY, Failed!!(Should never set default bit when remove key)\n"));
-                    }
-                    else
-                    {
-                        KeyIdx = KeyIdx & 0x0fffffff;
-                        if (KeyIdx > 3)
-                        {
-                            Status  = -EINVAL;
-                            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY, Failed!!(KeyId[%d] out of range)\n", KeyIdx));
-                        }
-                        else
-                        {
-                            pAdapter->SharedKey[BSS0][KeyIdx].KeyLen = 0;
-                            pAdapter->SharedKey[BSS0][KeyIdx].CipherAlg = CIPHER_NONE;
-                            AsicRemoveSharedKeyEntry(pAdapter, 0, (UCHAR)KeyIdx);
-                            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY (id=0x%x, Len=%d-byte)\n", pRemoveKey->KeyIndex, pRemoveKey->Length));
-                        }
-                    }
-                }
-            }
-            kfree(pRemoveKey);
-            break;
-        // New for WPA
-        case OID_802_11_ADD_KEY:
-            pKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-            if(pKey == NULL)
-            {
-                Status = -ENOMEM;
-                break;
-            }
-            Status = copy_from_user(pKey, wrq->u.data.pointer, wrq->u.data.length);
-            if (pKey->Length != wrq->u.data.length)
-            {
-                Status  = -EINVAL;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_KEY, Failed!!\n"));
-            }
-            else
-            {
-                RTMPAddKey(pAdapter, pKey);
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_KEY (id=0x%x, Len=%d-byte)\n", pKey->KeyIndex, pKey->KeyLength));
-            }
-            kfree(pKey);
-            break;
-        case OID_802_11_CONFIGURATION:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_CONFIGURATION))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&Config, wrq->u.data.pointer, wrq->u.data.length);
-                pConfig = &Config;
-
-                if ((pConfig->BeaconPeriod >= 20) && (pConfig->BeaconPeriod <=400))
-                     pAdapter->CommonCfg.BeaconPeriod = (USHORT) pConfig->BeaconPeriod;
-
-                pAdapter->StaActive.AtimWin = (USHORT) pConfig->ATIMWindow;
-                MAP_KHZ_TO_CHANNEL_ID(pConfig->DSConfig, pAdapter->CommonCfg.Channel);
-                //
-				// Save the channel on MlmeAux for CntlOidRTBssidProc used.
-				//
-				pAdapter->MlmeAux.Channel = pAdapter->CommonCfg.Channel;
-
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_CONFIGURATION (BeacnPeriod=%ld,AtimW=%ld,Ch=%d)\n",
-                    pConfig->BeaconPeriod, pConfig->ATIMWindow, pAdapter->CommonCfg.Channel));
-                // Config has changed
-                pAdapter->bConfigChanged = TRUE;
-            }
-            break;
-#ifdef DOT11_N_SUPPORT
-		case RT_OID_802_11_SET_HT_PHYMODE:
-			if (wrq->u.data.length	!= sizeof(OID_SET_HT_PHYMODE))
-				Status = -EINVAL;
-			else
-			{
-			    POID_SET_HT_PHYMODE	pHTPhyMode = &HT_PhyMode;
-
-				Status = copy_from_user(&HT_PhyMode, wrq->u.data.pointer, wrq->u.data.length);
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::pHTPhyMode	(PhyMode = %d,TransmitNo = %d, HtMode =	%d,	ExtOffset =	%d , MCS = %d, BW =	%d,	STBC = %d, SHORTGI = %d) \n",
-				pHTPhyMode->PhyMode, pHTPhyMode->TransmitNo,pHTPhyMode->HtMode,pHTPhyMode->ExtOffset,
-				pHTPhyMode->MCS, pHTPhyMode->BW, pHTPhyMode->STBC,	pHTPhyMode->SHORTGI));
-				if (pAdapter->CommonCfg.PhyMode	>= PHY_11ABGN_MIXED)
-					RTMPSetHT(pAdapter,	pHTPhyMode);
-			}
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_HT_PHYMODE(MCS=%d,BW=%d,SGI=%d,STBC=%d)\n",
-				pAdapter->StaCfg.HTPhyMode.field.MCS, pAdapter->StaCfg.HTPhyMode.field.BW, pAdapter->StaCfg.HTPhyMode.field.ShortGI,
-				pAdapter->StaCfg.HTPhyMode.field.STBC));
-			break;
-#endif // DOT11_N_SUPPORT //
-		case RT_OID_802_11_SET_APSD_SETTING:
-			if (wrq->u.data.length != sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				ULONG apsd ;
-				Status = copy_from_user(&apsd, wrq->u.data.pointer,	wrq->u.data.length);
-
-				/*-------------------------------------------------------------------
-				|B31~B7	|	B6~B5	 |	 B4	 |	 B3	 |	B2	 |	B1	 |	   B0		|
-				---------------------------------------------------------------------
-				| Rsvd	| Max SP Len | AC_VO | AC_VI | AC_BK | AC_BE | APSD	Capable	|
-				---------------------------------------------------------------------*/
-				pAdapter->CommonCfg.bAPSDCapable = (apsd & 0x00000001) ? TRUE :	FALSE;
-				pAdapter->CommonCfg.bAPSDAC_BE = ((apsd	& 0x00000002) >> 1)	? TRUE : FALSE;
-				pAdapter->CommonCfg.bAPSDAC_BK = ((apsd	& 0x00000004) >> 2)	? TRUE : FALSE;
-				pAdapter->CommonCfg.bAPSDAC_VI = ((apsd	& 0x00000008) >> 3)	? TRUE : FALSE;
-				pAdapter->CommonCfg.bAPSDAC_VO = ((apsd	& 0x00000010) >> 4)	? TRUE : FALSE;
-				pAdapter->CommonCfg.MaxSPLength	= (UCHAR)((apsd	& 0x00000060) >> 5);
-
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_APSD_SETTING (apsd=0x%lx, APSDCap=%d, [BE,BK,VI,VO]=[%d/%d/%d/%d],	MaxSPLen=%d)\n", apsd, pAdapter->CommonCfg.bAPSDCapable,
-					pAdapter->CommonCfg.bAPSDAC_BE,	pAdapter->CommonCfg.bAPSDAC_BK,	pAdapter->CommonCfg.bAPSDAC_VI,	pAdapter->CommonCfg.bAPSDAC_VO,	pAdapter->CommonCfg.MaxSPLength));
-			}
-			break;
-
-		case RT_OID_802_11_SET_APSD_PSM:
-			if (wrq->u.data.length	!= sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				// Driver needs	to notify AP when PSM changes
-				Status = copy_from_user(&pAdapter->CommonCfg.bAPSDForcePowerSave, wrq->u.data.pointer, wrq->u.data.length);
-				if (pAdapter->CommonCfg.bAPSDForcePowerSave	!= pAdapter->StaCfg.Psm)
-				{
-					MlmeSetPsmBit(pAdapter,	pAdapter->CommonCfg.bAPSDForcePowerSave);
-					RTMPSendNullFrame(pAdapter,	pAdapter->CommonCfg.TxRate,	TRUE);
-				}
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_APSD_PSM (bAPSDForcePowerSave:%d)\n",	pAdapter->CommonCfg.bAPSDForcePowerSave));
-			}
-			break;
-#ifdef QOS_DLS_SUPPORT
-		case RT_OID_802_11_SET_DLS:
-			if (wrq->u.data.length != sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				BOOLEAN	oldvalue = pAdapter->CommonCfg.bDLSCapable;
-				Status = copy_from_user(&pAdapter->CommonCfg.bDLSCapable, wrq->u.data.pointer, wrq->u.data.length);
-				if (oldvalue &&	!pAdapter->CommonCfg.bDLSCapable)
-				{
-					int	i;
-					// tear	down local dls table entry
-					for	(i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-					{
-						if (pAdapter->StaCfg.DLSEntry[i].Valid && (pAdapter->StaCfg.DLSEntry[i].Status == DLS_FINISH))
-						{
-							pAdapter->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-							pAdapter->StaCfg.DLSEntry[i].Valid	= FALSE;
-							RTMPSendDLSTearDownFrame(pAdapter, pAdapter->StaCfg.DLSEntry[i].MacAddr);
-						}
-					}
-
-					// tear	down peer dls table	entry
-					for	(i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
-					{
-						if (pAdapter->StaCfg.DLSEntry[i].Valid && (pAdapter->StaCfg.DLSEntry[i].Status == DLS_FINISH))
-						{
-							pAdapter->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-							pAdapter->StaCfg.DLSEntry[i].Valid	= FALSE;
-							RTMPSendDLSTearDownFrame(pAdapter, pAdapter->StaCfg.DLSEntry[i].MacAddr);
-						}
-					}
-				}
-
-				DBGPRINT(RT_DEBUG_TRACE,("Set::RT_OID_802_11_SET_DLS (=%d)\n", pAdapter->CommonCfg.bDLSCapable));
-			}
-			break;
-
-		case RT_OID_802_11_SET_DLS_PARAM:
-			if (wrq->u.data.length	!= sizeof(RT_802_11_DLS_UI))
-				Status = -EINVAL;
-			else
-			{
-				RT_802_11_DLS	Dls;
-
-				NdisZeroMemory(&Dls, sizeof(RT_802_11_DLS));
-				RTMPMoveMemory(&Dls, wrq->u.data.pointer, sizeof(RT_802_11_DLS_UI));
-				MlmeEnqueue(pAdapter,
-							MLME_CNTL_STATE_MACHINE,
-							RT_OID_802_11_SET_DLS_PARAM,
-							sizeof(RT_802_11_DLS),
-							&Dls);
-				DBGPRINT(RT_DEBUG_TRACE,("Set::RT_OID_802_11_SET_DLS_PARAM \n"));
-			}
-			break;
-#endif // QOS_DLS_SUPPORT //
-		case RT_OID_802_11_SET_WMM:
-			if (wrq->u.data.length	!= sizeof(BOOLEAN))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&pAdapter->CommonCfg.bWmmCapable, wrq->u.data.pointer, wrq->u.data.length);
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_WMM (=%d)	\n", pAdapter->CommonCfg.bWmmCapable));
-			}
-			break;
-
-		case OID_802_11_DISASSOCIATE:
-#ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				break;
-			}
-#endif // RALINK_ATE //
-			//
-			// Set NdisRadioStateOff to	TRUE, instead of called	MlmeRadioOff.
-			// Later on, NDIS_802_11_BSSID_LIST_EX->NumberOfItems should be	0
-			// when	query OID_802_11_BSSID_LIST.
-			//
-			// TRUE:  NumberOfItems	will set to	0.
-			// FALSE: NumberOfItems	no change.
-			//
-			pAdapter->CommonCfg.NdisRadioStateOff =	TRUE;
-			// Set to immediately send the media disconnect	event
-			pAdapter->MlmeAux.CurrReqIsFromNdis	= TRUE;
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_DISASSOCIATE	\n"));
-
-			if (INFRA_ON(pAdapter))
-			{
-				if (pAdapter->Mlme.CntlMachine.CurrState !=	CNTL_IDLE)
-				{
-					RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-					DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME	busy, reset	MLME state machine !!!\n"));
-				}
-
-				MlmeEnqueue(pAdapter,
-					MLME_CNTL_STATE_MACHINE,
-					OID_802_11_DISASSOCIATE,
-					0,
-					NULL);
-
-				StateMachineTouched	= TRUE;
-			}
-			break;
-
-#ifdef DOT11_N_SUPPORT
-		case RT_OID_802_11_SET_IMME_BA_CAP:
-				if (wrq->u.data.length != sizeof(OID_BACAP_STRUC))
-					Status = -EINVAL;
-				else
-				{
-					OID_BACAP_STRUC Orde ;
-					Status = copy_from_user(&Orde, wrq->u.data.pointer, wrq->u.data.length);
-					if (Orde.Policy > BA_NOTUSE)
-					{
-						Status = NDIS_STATUS_INVALID_DATA;
-					}
-					else if (Orde.Policy == BA_NOTUSE)
-					{
-						pAdapter->CommonCfg.BACapability.field.Policy = BA_NOTUSE;
-						pAdapter->CommonCfg.BACapability.field.MpduDensity = Orde.MpduDensity;
-						pAdapter->CommonCfg.DesiredHtPhy.MpduDensity = Orde.MpduDensity;
-						pAdapter->CommonCfg.DesiredHtPhy.AmsduEnable = Orde.AmsduEnable;
-						pAdapter->CommonCfg.DesiredHtPhy.AmsduSize= Orde.AmsduSize;
-						pAdapter->CommonCfg.DesiredHtPhy.MimoPs= Orde.MMPSmode;
-						pAdapter->CommonCfg.BACapability.field.MMPSmode = Orde.MMPSmode;
-						// UPdata to HT IE
-						pAdapter->CommonCfg.HtCapability.HtCapInfo.MimoPs = Orde.MMPSmode;
-						pAdapter->CommonCfg.HtCapability.HtCapInfo.AMsduSize = Orde.AmsduSize;
-						pAdapter->CommonCfg.HtCapability.HtCapParm.MpduDensity = Orde.MpduDensity;
-					}
-					else
-					{
-                        pAdapter->CommonCfg.BACapability.field.AutoBA = Orde.AutoBA;
-						pAdapter->CommonCfg.BACapability.field.Policy = IMMED_BA; // we only support immediate BA.
-						pAdapter->CommonCfg.BACapability.field.MpduDensity = Orde.MpduDensity;
-						pAdapter->CommonCfg.DesiredHtPhy.MpduDensity = Orde.MpduDensity;
-						pAdapter->CommonCfg.DesiredHtPhy.AmsduEnable = Orde.AmsduEnable;
-						pAdapter->CommonCfg.DesiredHtPhy.AmsduSize= Orde.AmsduSize;
-						pAdapter->CommonCfg.DesiredHtPhy.MimoPs = Orde.MMPSmode;
-						pAdapter->CommonCfg.BACapability.field.MMPSmode = Orde.MMPSmode;
-
-						// UPdata to HT IE
-						pAdapter->CommonCfg.HtCapability.HtCapInfo.MimoPs = Orde.MMPSmode;
-						pAdapter->CommonCfg.HtCapability.HtCapInfo.AMsduSize = Orde.AmsduSize;
-						pAdapter->CommonCfg.HtCapability.HtCapParm.MpduDensity = Orde.MpduDensity;
-
-						if (pAdapter->CommonCfg.BACapability.field.RxBAWinLimit > MAX_RX_REORDERBUF)
-							pAdapter->CommonCfg.BACapability.field.RxBAWinLimit = MAX_RX_REORDERBUF;
-
-					}
-
-					pAdapter->CommonCfg.REGBACapability.word = pAdapter->CommonCfg.BACapability.word;
-					DBGPRINT(RT_DEBUG_TRACE, ("Set::(Orde.AutoBA = %d) (Policy=%d)(ReBAWinLimit=%d)(TxBAWinLimit=%d)(AutoMode=%d)\n",Orde.AutoBA, pAdapter->CommonCfg.BACapability.field.Policy,
-						pAdapter->CommonCfg.BACapability.field.RxBAWinLimit,pAdapter->CommonCfg.BACapability.field.TxBAWinLimit, pAdapter->CommonCfg.BACapability.field.AutoBA));
-					DBGPRINT(RT_DEBUG_TRACE, ("Set::(MimoPs = %d)(AmsduEnable = %d) (AmsduSize=%d)(MpduDensity=%d)\n",pAdapter->CommonCfg.DesiredHtPhy.MimoPs, pAdapter->CommonCfg.DesiredHtPhy.AmsduEnable,
-						pAdapter->CommonCfg.DesiredHtPhy.AmsduSize, pAdapter->CommonCfg.DesiredHtPhy.MpduDensity));
-				}
-
-				break;
-		case RT_OID_802_11_ADD_IMME_BA:
-			DBGPRINT(RT_DEBUG_TRACE, (" Set :: RT_OID_802_11_ADD_IMME_BA \n"));
-			if (wrq->u.data.length != sizeof(OID_ADD_BA_ENTRY))
-					Status = -EINVAL;
-			else
-			{
-				UCHAR		        index;
-				OID_ADD_BA_ENTRY    BA;
-				MAC_TABLE_ENTRY     *pEntry;
-
-				Status = copy_from_user(&BA, wrq->u.data.pointer, wrq->u.data.length);
-				if (BA.TID > 15)
-				{
-					Status = NDIS_STATUS_INVALID_DATA;
-					break;
-				}
-				else
-				{
-					//BATableInsertEntry
-					//As ad-hoc mode, BA pair is not limited to only BSSID. so add via OID.
-					index = BA.TID;
-					// in ad hoc mode, when adding BA pair, we should insert this entry into MACEntry too
-					pEntry = MacTableLookup(pAdapter, BA.MACAddr);
-					if (!pEntry)
-					{
-						DBGPRINT(RT_DEBUG_TRACE, ("RT_OID_802_11_ADD_IMME_BA. break on no connection.----:%x:%x\n", BA.MACAddr[4], BA.MACAddr[5]));
-						break;
-					}
-					if (BA.IsRecipient == FALSE)
-					{
-					    if (pEntry->bIAmBadAtheros == TRUE)
-							pAdapter->CommonCfg.BACapability.field.RxBAWinLimit = 0x10;
-
-						BAOriSessionSetUp(pAdapter, pEntry, index, 0, 100, TRUE);
-					}
-					else
-					{
-						//BATableInsertEntry(pAdapter, pEntry->Aid, BA.MACAddr, 0, 0xffff, BA.TID, BA.nMSDU, BA.IsRecipient);
-					}
-
-					DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_IMME_BA. Rec = %d. Mac = %x:%x:%x:%x:%x:%x . \n",
-						BA.IsRecipient, BA.MACAddr[0], BA.MACAddr[1], BA.MACAddr[2], BA.MACAddr[2]
-						, BA.MACAddr[4], BA.MACAddr[5]));
-				}
-			}
-			break;
-
-		case RT_OID_802_11_TEAR_IMME_BA:
-			DBGPRINT(RT_DEBUG_TRACE, ("Set :: RT_OID_802_11_TEAR_IMME_BA \n"));
-			if (wrq->u.data.length != sizeof(OID_ADD_BA_ENTRY))
-					Status = -EINVAL;
-			else
-			{
-				POID_ADD_BA_ENTRY	pBA;
-				MAC_TABLE_ENTRY *pEntry;
-
-				pBA = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-
-				if (pBA == NULL)
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("Set :: RT_OID_802_11_TEAR_IMME_BA kmalloc() can't allocate enough memory\n"));
-					Status = NDIS_STATUS_FAILURE;
-				}
-				else
-				{
-					Status = copy_from_user(pBA, wrq->u.data.pointer, wrq->u.data.length);
-					DBGPRINT(RT_DEBUG_TRACE, ("Set :: RT_OID_802_11_TEAR_IMME_BA(TID=%d, bAllTid=%d)\n", pBA->TID, pBA->bAllTid));
-
-					if (!pBA->bAllTid && (pBA->TID > NUM_OF_TID))
-					{
-						Status = NDIS_STATUS_INVALID_DATA;
-						break;
-					}
-
-					if (pBA->IsRecipient == FALSE)
-					{
-						pEntry = MacTableLookup(pAdapter, pBA->MACAddr);
-						DBGPRINT(RT_DEBUG_TRACE, (" pBA->IsRecipient == FALSE\n"));
-						if (pEntry)
-						{
-							DBGPRINT(RT_DEBUG_TRACE, (" pBA->pEntry\n"));
-							BAOriSessionTearDown(pAdapter, pEntry->Aid, pBA->TID, FALSE, TRUE);
-						}
-						else
-							DBGPRINT(RT_DEBUG_TRACE, ("Set :: Not found pEntry \n"));
-					}
-					else
-					{
-						pEntry = MacTableLookup(pAdapter, pBA->MACAddr);
-						if (pEntry)
-						{
-							BARecSessionTearDown( pAdapter, (UCHAR)pEntry->Aid, pBA->TID, TRUE);
-						}
-						else
-							DBGPRINT(RT_DEBUG_TRACE, ("Set :: Not found pEntry \n"));
-					}
-					kfree(pBA);
-				}
-            }
-            break;
-#endif // DOT11_N_SUPPORT //
-
-        // For WPA_SUPPLICANT to set static wep key
-    	case OID_802_11_ADD_WEP:
-    	    pWepKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-
-    	    if(pWepKey == NULL)
-            {
-                Status = -ENOMEM;
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP, Failed!!\n"));
-                break;
-            }
-            Status = copy_from_user(pWepKey, wrq->u.data.pointer, wrq->u.data.length);
-            if (Status)
-            {
-                Status  = -EINVAL;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP, Failed (length mismatch)!!\n"));
-            }
-            else
-            {
-		        KeyIdx = pWepKey->KeyIndex & 0x0fffffff;
-                // KeyIdx must be 0 ~ 3
-                if (KeyIdx > 4)
-    			{
-                    Status  = -EINVAL;
-                    DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP, Failed (KeyIdx must be smaller than 4)!!\n"));
-                }
-                else
-                {
-                    UCHAR CipherAlg = 0;
-                    PUCHAR Key;
-
-                    // set key material and key length
-                    NdisZeroMemory(pAdapter->SharedKey[BSS0][KeyIdx].Key, 16);
-                    pAdapter->SharedKey[BSS0][KeyIdx].KeyLen = (UCHAR) pWepKey->KeyLength;
-                    NdisMoveMemory(pAdapter->SharedKey[BSS0][KeyIdx].Key, &pWepKey->KeyMaterial, pWepKey->KeyLength);
-
-                    switch(pWepKey->KeyLength)
-                    {
-                        case 5:
-                            CipherAlg = CIPHER_WEP64;
-                            break;
-                        case 13:
-                            CipherAlg = CIPHER_WEP128;
-                            break;
-                        default:
-                            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP, only support CIPHER_WEP64(len:5) & CIPHER_WEP128(len:13)!!\n"));
-                            Status = -EINVAL;
-                            break;
-                    }
-                    pAdapter->SharedKey[BSS0][KeyIdx].CipherAlg = CipherAlg;
-
-                    // Default key for tx (shared key)
-                    if (pWepKey->KeyIndex & 0x80000000)
-                    {
-#ifdef WPA_SUPPLICANT_SUPPORT
-                        // set key material and key length
-                        NdisZeroMemory(pAdapter->StaCfg.DesireSharedKey[KeyIdx].Key, 16);
-                        pAdapter->StaCfg.DesireSharedKey[KeyIdx].KeyLen = (UCHAR) pWepKey->KeyLength;
-                        NdisMoveMemory(pAdapter->StaCfg.DesireSharedKey[KeyIdx].Key, &pWepKey->KeyMaterial, pWepKey->KeyLength);
-                        pAdapter->StaCfg.DesireSharedKeyId = KeyIdx;
-                        pAdapter->StaCfg.DesireSharedKey[KeyIdx].CipherAlg = CipherAlg;
-#endif // WPA_SUPPLICANT_SUPPORT //
-                        pAdapter->StaCfg.DefaultKeyId = (UCHAR) KeyIdx;
-                    }
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-                    if (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED)
-#endif // WPA_SUPPLICANT_SUPPORT
-                    {
-                        Key = pAdapter->SharedKey[BSS0][KeyIdx].Key;
-
-                        // Set key material and cipherAlg to Asic
-        				AsicAddSharedKeyEntry(pAdapter, BSS0, KeyIdx, CipherAlg, Key, NULL, NULL);
-
-                        if (pWepKey->KeyIndex & 0x80000000)
-                        {
-                            PMAC_TABLE_ENTRY pEntry = &pAdapter->MacTab.Content[BSSID_WCID];
-                            // Assign group key info
-    						RTMPAddWcidAttributeEntry(pAdapter, BSS0, KeyIdx, CipherAlg, NULL);
-    						// Assign pairwise key info
-    						RTMPAddWcidAttributeEntry(pAdapter, BSS0, KeyIdx, CipherAlg, pEntry);
-                        }
-                    }
-					DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP (id=0x%x, Len=%d-byte), %s\n", pWepKey->KeyIndex, pWepKey->KeyLength, (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED) ? "Port Secured":"Port NOT Secured"));
-				}
-            }
-            kfree(pWepKey);
-            break;
-#ifdef WPA_SUPPLICANT_SUPPORT
-	    case OID_SET_COUNTERMEASURES:
-            if (wrq->u.data.length != sizeof(int))
-                Status  = -EINVAL;
-            else
-            {
-                int enabled = 0;
-                Status = copy_from_user(&enabled, wrq->u.data.pointer, wrq->u.data.length);
-                if (enabled == 1)
-                    pAdapter->StaCfg.bBlockAssoc = TRUE;
-                else
-                    // WPA MIC error should block association attempt for 60 seconds
-                    pAdapter->StaCfg.bBlockAssoc = FALSE;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_SET_COUNTERMEASURES bBlockAssoc=%s\n", pAdapter->StaCfg.bBlockAssoc ? "TRUE":"FALSE"));
-            }
-	        break;
-        case RT_OID_WPA_SUPPLICANT_SUPPORT:
-			if (wrq->u.data.length != sizeof(UCHAR))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&wpa_supplicant_enable, wrq->u.data.pointer, wrq->u.data.length);
-    			pAdapter->StaCfg.WpaSupplicantUP = wpa_supplicant_enable;
-    			DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_WPA_SUPPLICANT_SUPPORT (=%d)\n", pAdapter->StaCfg.WpaSupplicantUP));
-			}
-            break;
-        case OID_802_11_DEAUTHENTICATION:
-            if (wrq->u.data.length != sizeof(MLME_DEAUTH_REQ_STRUCT))
-                Status  = -EINVAL;
-            else
-            {
-                MLME_DEAUTH_REQ_STRUCT      *pInfo;
-				MLME_QUEUE_ELEM *MsgElem = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);
-
-                pInfo = (MLME_DEAUTH_REQ_STRUCT *) MsgElem->Msg;
-                Status = copy_from_user(pInfo, wrq->u.data.pointer, wrq->u.data.length);
-                MlmeDeauthReqAction(pAdapter, MsgElem);
-				kfree(MsgElem);
-
-                if (INFRA_ON(pAdapter))
-                {
-                    LinkDown(pAdapter, FALSE);
-                    pAdapter->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-                }
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_DEAUTHENTICATION (Reason=%d)\n", pInfo->Reason));
-            }
-            break;
-        case OID_802_11_DROP_UNENCRYPTED:
-            if (wrq->u.data.length != sizeof(int))
-                Status  = -EINVAL;
-            else
-            {
-                int enabled = 0;
-                Status = copy_from_user(&enabled, wrq->u.data.pointer, wrq->u.data.length);
-                if (enabled == 1)
-                    pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-                else
-                    pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-				NdisAcquireSpinLock(&pAdapter->MacTabLock);
-				pAdapter->MacTab.Content[BSSID_WCID].PortSecured = pAdapter->StaCfg.PortSecured;
-				NdisReleaseSpinLock(&pAdapter->MacTabLock);
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_DROP_UNENCRYPTED (=%d)\n", enabled));
-            }
-            break;
-        case OID_802_11_SET_IEEE8021X:
-            if (wrq->u.data.length != sizeof(BOOLEAN))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&IEEE8021xState, wrq->u.data.pointer, wrq->u.data.length);
-		        pAdapter->StaCfg.IEEE8021X = IEEE8021xState;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_SET_IEEE8021X (=%d)\n", IEEE8021xState));
-            }
-            break;
-        case OID_802_11_SET_IEEE8021X_REQUIRE_KEY:
-			if (wrq->u.data.length != sizeof(BOOLEAN))
-				 Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&IEEE8021x_required_keys, wrq->u.data.pointer, wrq->u.data.length);
-				pAdapter->StaCfg.IEEE8021x_required_keys = IEEE8021x_required_keys;
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_SET_IEEE8021X_REQUIRE_KEY (%d)\n", IEEE8021x_required_keys));
-			}
-			break;
-        case OID_802_11_PMKID:
-	        pPmkId = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-
-	        if(pPmkId == NULL) {
-                Status = -ENOMEM;
-                break;
-            }
-            Status = copy_from_user(pPmkId, wrq->u.data.pointer, wrq->u.data.length);
-
-	        // check the PMKID information
-	        if (pPmkId->BSSIDInfoCount == 0)
-                NdisZeroMemory(pAdapter->StaCfg.SavedPMK, sizeof(BSSID_INFO)*PMKID_NO);
-	        else
-	        {
-		        PBSSID_INFO	pBssIdInfo;
-		        UINT		BssIdx;
-		        UINT		CachedIdx;
-
-		        for (BssIdx = 0; BssIdx < pPmkId->BSSIDInfoCount; BssIdx++)
-		        {
-			        // point to the indexed BSSID_INFO structure
-			        pBssIdInfo = (PBSSID_INFO) ((PUCHAR) pPmkId + 2 * sizeof(UINT) + BssIdx * sizeof(BSSID_INFO));
-			        // Find the entry in the saved data base.
-			        for (CachedIdx = 0; CachedIdx < pAdapter->StaCfg.SavedPMKNum; CachedIdx++)
-			        {
-				        // compare the BSSID
-				        if (NdisEqualMemory(pBssIdInfo->BSSID, pAdapter->StaCfg.SavedPMK[CachedIdx].BSSID, sizeof(NDIS_802_11_MAC_ADDRESS)))
-					        break;
-			        }
-
-			        // Found, replace it
-			        if (CachedIdx < PMKID_NO)
-			        {
-				        DBGPRINT(RT_DEBUG_OFF, ("Update OID_802_11_PMKID, idx = %d\n", CachedIdx));
-				        NdisMoveMemory(&pAdapter->StaCfg.SavedPMK[CachedIdx], pBssIdInfo, sizeof(BSSID_INFO));
-				        pAdapter->StaCfg.SavedPMKNum++;
-			        }
-			        // Not found, replace the last one
-			        else
-			        {
-				        // Randomly replace one
-				        CachedIdx = (pBssIdInfo->BSSID[5] % PMKID_NO);
-				        DBGPRINT(RT_DEBUG_OFF, ("Update OID_802_11_PMKID, idx = %d\n", CachedIdx));
-				        NdisMoveMemory(&pAdapter->StaCfg.SavedPMK[CachedIdx], pBssIdInfo, sizeof(BSSID_INFO));
-			        }
-		        }
-			}
-			if(pPmkId)
-				kfree(pPmkId);
-	        break;
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-
-
-#ifdef SNMP_SUPPORT
-		case OID_802_11_SHORTRETRYLIMIT:
-			if (wrq->u.data.length != sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&ShortRetryLimit, wrq->u.data.pointer, wrq->u.data.length);
-				RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
-				tx_rty_cfg.field.ShortRtyLimit = ShortRetryLimit;
-				RTMP_IO_WRITE32(pAdapter, TX_RTY_CFG, tx_rty_cfg.word);
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_SHORTRETRYLIMIT (tx_rty_cfg.field.ShortRetryLimit=%d, ShortRetryLimit=%ld)\n", tx_rty_cfg.field.ShortRtyLimit, ShortRetryLimit));
-			}
-			break;
-
-		case OID_802_11_LONGRETRYLIMIT:
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_LONGRETRYLIMIT \n"));
-			if (wrq->u.data.length != sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&LongRetryLimit, wrq->u.data.pointer, wrq->u.data.length);
-				RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
-				tx_rty_cfg.field.LongRtyLimit = LongRetryLimit;
-				RTMP_IO_WRITE32(pAdapter, TX_RTY_CFG, tx_rty_cfg.word);
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_LONGRETRYLIMIT (tx_rty_cfg.field.LongRetryLimit= %d,LongRetryLimit=%ld)\n", tx_rty_cfg.field.LongRtyLimit, LongRetryLimit));
-			}
-			break;
-
-		case OID_802_11_WEPDEFAULTKEYVALUE:
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_WEPDEFAULTKEYVALUE\n"));
-			pKey = kmalloc(wrq->u.data.length, GFP_KERNEL);
-			Status = copy_from_user(pKey, wrq->u.data.pointer, wrq->u.data.length);
-			//pKey = &WepKey;
-
-			if ( pKey->Length != wrq->u.data.length)
-			{
-				Status = -EINVAL;
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_WEPDEFAULTKEYVALUE, Failed!!\n"));
-			}
-			KeyIdx = pKey->KeyIndex & 0x0fffffff;
-			DBGPRINT(RT_DEBUG_TRACE,("pKey->KeyIndex =%d, pKey->KeyLength=%d\n", pKey->KeyIndex, pKey->KeyLength));
-
-			// it is a shared key
-			if (KeyIdx > 4)
-				Status = -EINVAL;
-			else
-			{
-				pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen = (UCHAR) pKey->KeyLength;
-				NdisMoveMemory(&pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].Key, &pKey->KeyMaterial, pKey->KeyLength);
-				if (pKey->KeyIndex & 0x80000000)
-				{
-					// Default key for tx (shared key)
-					pAdapter->StaCfg.DefaultKeyId = (UCHAR) KeyIdx;
-				}
-				//RestartAPIsRequired = TRUE;
-			}
-			break;
-
-
-		case OID_802_11_WEPDEFAULTKEYID:
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_WEPDEFAULTKEYID \n"));
-
-			if (wrq->u.data.length != sizeof(UCHAR))
-				Status = -EINVAL;
-			else
-				Status = copy_from_user(&pAdapter->StaCfg.DefaultKeyId, wrq->u.data.pointer, wrq->u.data.length);
-
-			break;
-
-
-		case OID_802_11_CURRENTCHANNEL:
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_CURRENTCHANNEL \n"));
-			if (wrq->u.data.length != sizeof(UCHAR))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&ctmp, wrq->u.data.pointer, wrq->u.data.length);
-				sprintf(&ctmp,"%d", ctmp);
-				Set_Channel_Proc(pAdapter, &ctmp);
-			}
-			break;
-#endif
-
-
-
-        default:
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::unknown IOCTL's subcmd = 0x%08x\n", cmd));
-            Status = -EOPNOTSUPP;
-            break;
-    }
-
-
-    return Status;
-}
-
-INT RTMPQueryInformation(
-    IN  PRTMP_ADAPTER pAdapter,
-    IN  OUT struct ifreq    *rq,
-    IN  INT                 cmd)
-{
-    struct iwreq                        *wrq = (struct iwreq *) rq;
-    NDIS_802_11_BSSID_LIST_EX           *pBssidList = NULL;
-    PNDIS_WLAN_BSSID_EX                 pBss;
-    NDIS_802_11_SSID                    Ssid;
-    NDIS_802_11_CONFIGURATION           *pConfiguration = NULL;
-    RT_802_11_LINK_STATUS               *pLinkStatus = NULL;
-    RT_802_11_STA_CONFIG                *pStaConfig = NULL;
-    NDIS_802_11_STATISTICS              *pStatistics = NULL;
-    NDIS_802_11_RTS_THRESHOLD           RtsThresh;
-    NDIS_802_11_FRAGMENTATION_THRESHOLD FragThresh;
-    NDIS_802_11_POWER_MODE              PowerMode;
-    NDIS_802_11_NETWORK_INFRASTRUCTURE  BssType;
-    RT_802_11_PREAMBLE                  PreamType;
-    NDIS_802_11_AUTHENTICATION_MODE     AuthMode;
-    NDIS_802_11_WEP_STATUS              WepStatus;
-    NDIS_MEDIA_STATE                    MediaState;
-    ULONG                               BssBufSize, ulInfo=0, NetworkTypeList[4], apsd = 0;
-    USHORT                              BssLen = 0;
-    PUCHAR                              pBuf = NULL, pPtr;
-    INT                                 Status = NDIS_STATUS_SUCCESS;
-    UINT                                we_version_compiled;
-    UCHAR                               i, Padding = 0;
-    BOOLEAN                             RadioState;
-	UCHAR	driverVersion[8];
-    OID_SET_HT_PHYMODE			        *pHTPhyMode = NULL;
-
-
-#ifdef SNMP_SUPPORT
-	//for snmp, kathy
-	DefaultKeyIdxValue			*pKeyIdxValue;
-	INT							valueLen;
-	TX_RTY_CFG_STRUC			tx_rty_cfg;
-	ULONG						ShortRetryLimit, LongRetryLimit;
-	UCHAR						tmp[64];
-#endif //SNMP
-
-    switch(cmd)
-    {
-        case RT_OID_DEVICE_NAME:
-            wrq->u.data.length = sizeof(STA_NIC_DEVICE_NAME);
-            Status = copy_to_user(wrq->u.data.pointer, STA_NIC_DEVICE_NAME, wrq->u.data.length);
-            break;
-        case RT_OID_VERSION_INFO:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_VERSION_INFO \n"));
-			wrq->u.data.length = 8*sizeof(UCHAR);
-			sprintf(&driverVersion[0], "%s", STA_DRIVER_VERSION);
-			driverVersion[7] = '\0';
-			if (copy_to_user(wrq->u.data.pointer, &driverVersion, wrq->u.data.length))
-            {
-				Status = -EFAULT;
-            }
-            break;
-#ifdef RALINK_ATE
-		case RT_QUERY_ATE_TXDONE_COUNT:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_QUERY_ATE_TXDONE_COUNT \n"));
-			wrq->u.data.length = sizeof(UINT32);
-			if (copy_to_user(wrq->u.data.pointer, &pAdapter->ate.TxDoneCount, wrq->u.data.length))
-			{
-				Status = -EFAULT;
-			}
-			break;
-#endif // RALINK_ATE //
-        case OID_802_11_BSSID_LIST:
-            if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-            {
-            	/*
-            	 * Still scanning, indicate the caller should try again.
-            	 */
-            	DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_BSSID_LIST (Still scanning)\n"));
-				return -EAGAIN;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_BSSID_LIST (%d BSS returned)\n",pAdapter->ScanTab.BssNr));
-			pAdapter->StaCfg.bScanReqIsFromWebUI = FALSE;
-            // Claculate total buffer size required
-            BssBufSize = sizeof(ULONG);
-
-            for (i = 0; i < pAdapter->ScanTab.BssNr; i++)
-            {
-                // Align pointer to 4 bytes boundary.
-                //Padding = 4 - (pAdapter->ScanTab.BssEntry[i].VarIELen & 0x0003);
-                //if (Padding == 4)
-                //    Padding = 0;
-                BssBufSize += (sizeof(NDIS_WLAN_BSSID_EX) - 1 + sizeof(NDIS_802_11_FIXED_IEs) + pAdapter->ScanTab.BssEntry[i].VarIELen + Padding);
-            }
-
-            // For safety issue, we add 256 bytes just in case
-            BssBufSize += 256;
-            // Allocate the same size as passed from higher layer
-            pBuf = kmalloc(BssBufSize, MEM_ALLOC_FLAG);
-            if(pBuf == NULL)
-            {
-                Status = -ENOMEM;
-                break;
-            }
-            // Init 802_11_BSSID_LIST_EX structure
-            NdisZeroMemory(pBuf, BssBufSize);
-            pBssidList = (PNDIS_802_11_BSSID_LIST_EX) pBuf;
-            pBssidList->NumberOfItems = pAdapter->ScanTab.BssNr;
-
-            // Calculate total buffer length
-            BssLen = 4; // Consist of NumberOfItems
-            // Point to start of NDIS_WLAN_BSSID_EX
-            // pPtr = pBuf + sizeof(ULONG);
-            pPtr = (PUCHAR) &pBssidList->Bssid[0];
-            for (i = 0; i < pAdapter->ScanTab.BssNr; i++)
-            {
-                pBss = (PNDIS_WLAN_BSSID_EX) pPtr;
-                NdisMoveMemory(&pBss->MacAddress, &pAdapter->ScanTab.BssEntry[i].Bssid, MAC_ADDR_LEN);
-                if ((pAdapter->ScanTab.BssEntry[i].Hidden == 1) && (pAdapter->StaCfg.bShowHiddenSSID == FALSE))
-                {
-                    //
-					// We must return this SSID during 4way handshaking, otherwise Aegis will failed to parse WPA infomation
-					// and then failed to send EAPOl farame.
-					//
-					if ((pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA) && (pAdapter->StaCfg.PortSecured != WPA_802_1X_PORT_SECURED))
-					{
-						pBss->Ssid.SsidLength = pAdapter->ScanTab.BssEntry[i].SsidLen;
-						NdisMoveMemory(pBss->Ssid.Ssid, pAdapter->ScanTab.BssEntry[i].Ssid, pAdapter->ScanTab.BssEntry[i].SsidLen);
-					}
-					else
-                    	pBss->Ssid.SsidLength = 0;
-                }
-                else
-                {
-                    pBss->Ssid.SsidLength = pAdapter->ScanTab.BssEntry[i].SsidLen;
-                    NdisMoveMemory(pBss->Ssid.Ssid, pAdapter->ScanTab.BssEntry[i].Ssid, pAdapter->ScanTab.BssEntry[i].SsidLen);
-                }
-                pBss->Privacy = pAdapter->ScanTab.BssEntry[i].Privacy;
-                pBss->Rssi = pAdapter->ScanTab.BssEntry[i].Rssi - pAdapter->BbpRssiToDbmDelta;
-                pBss->NetworkTypeInUse = NetworkTypeInUseSanity(&pAdapter->ScanTab.BssEntry[i]);
-                pBss->Configuration.Length = sizeof(NDIS_802_11_CONFIGURATION);
-                pBss->Configuration.BeaconPeriod = pAdapter->ScanTab.BssEntry[i].BeaconPeriod;
-                pBss->Configuration.ATIMWindow = pAdapter->ScanTab.BssEntry[i].AtimWin;
-
-                MAP_CHANNEL_ID_TO_KHZ(pAdapter->ScanTab.BssEntry[i].Channel, pBss->Configuration.DSConfig);
-
-                if (pAdapter->ScanTab.BssEntry[i].BssType == BSS_INFRA)
-                    pBss->InfrastructureMode = Ndis802_11Infrastructure;
-                else
-                    pBss->InfrastructureMode = Ndis802_11IBSS;
-
-                NdisMoveMemory(pBss->SupportedRates, pAdapter->ScanTab.BssEntry[i].SupRate, pAdapter->ScanTab.BssEntry[i].SupRateLen);
-                NdisMoveMemory(pBss->SupportedRates + pAdapter->ScanTab.BssEntry[i].SupRateLen,
-                               pAdapter->ScanTab.BssEntry[i].ExtRate,
-                               pAdapter->ScanTab.BssEntry[i].ExtRateLen);
-
-                if (pAdapter->ScanTab.BssEntry[i].VarIELen == 0)
-                {
-                    pBss->IELength = sizeof(NDIS_802_11_FIXED_IEs);
-                    NdisMoveMemory(pBss->IEs, &pAdapter->ScanTab.BssEntry[i].FixIEs, sizeof(NDIS_802_11_FIXED_IEs));
-                    pPtr = pPtr + sizeof(NDIS_WLAN_BSSID_EX) - 1 + sizeof(NDIS_802_11_FIXED_IEs);
-                }
-                else
-                {
-                    pBss->IELength = (ULONG)(sizeof(NDIS_802_11_FIXED_IEs) + pAdapter->ScanTab.BssEntry[i].VarIELen);
-                    pPtr = pPtr + sizeof(NDIS_WLAN_BSSID_EX) - 1 + sizeof(NDIS_802_11_FIXED_IEs);
-                    NdisMoveMemory(pBss->IEs, &pAdapter->ScanTab.BssEntry[i].FixIEs, sizeof(NDIS_802_11_FIXED_IEs));
-                    NdisMoveMemory(pBss->IEs + sizeof(NDIS_802_11_FIXED_IEs), pAdapter->ScanTab.BssEntry[i].VarIEs, pAdapter->ScanTab.BssEntry[i].VarIELen);
-                    pPtr += pAdapter->ScanTab.BssEntry[i].VarIELen;
-                }
-                pBss->Length = (ULONG)(sizeof(NDIS_WLAN_BSSID_EX) - 1 + sizeof(NDIS_802_11_FIXED_IEs) + pAdapter->ScanTab.BssEntry[i].VarIELen + Padding);
-
-#if WIRELESS_EXT < 17
-                if ((BssLen + pBss->Length) < wrq->u.data.length)
-                BssLen += pBss->Length;
-                else
-                {
-                    pBssidList->NumberOfItems = i;
-                    break;
-                }
-#else
-                BssLen += pBss->Length;
-#endif
-            }
-
-#if WIRELESS_EXT < 17
-            wrq->u.data.length = BssLen;
-#else
-            if (BssLen > wrq->u.data.length)
-            {
-                kfree(pBssidList);
-                return -E2BIG;
-            }
-            else
-                wrq->u.data.length = BssLen;
-#endif
-            Status = copy_to_user(wrq->u.data.pointer, pBssidList, BssLen);
-            kfree(pBssidList);
-            break;
-        case OID_802_3_CURRENT_ADDRESS:
-            wrq->u.data.length = MAC_ADDR_LEN;
-            Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CurrentAddress, wrq->u.data.length);
-            break;
-        case OID_GEN_MEDIA_CONNECT_STATUS:
-            if (pAdapter->IndicateMediaState == NdisMediaStateConnected)
-                MediaState = NdisMediaStateConnected;
-            else
-                MediaState = NdisMediaStateDisconnected;
-
-            wrq->u.data.length = sizeof(NDIS_MEDIA_STATE);
-            Status = copy_to_user(wrq->u.data.pointer, &MediaState, wrq->u.data.length);
-            break;
-        case OID_802_11_BSSID:
-#ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				Status = NDIS_STATUS_RESOURCES;
-				break;
-			}
-#endif // RALINK_ATE //
-            if (INFRA_ON(pAdapter) || ADHOC_ON(pAdapter))
-            {
-                Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.Bssid, sizeof(NDIS_802_11_MAC_ADDRESS));
-
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_BSSID(=EMPTY)\n"));
-                Status = -ENOTCONN;
-            }
-            break;
-        case OID_802_11_SSID:
-			NdisZeroMemory(&Ssid, sizeof(NDIS_802_11_SSID));
-			NdisZeroMemory(Ssid.Ssid, MAX_LEN_OF_SSID);
-            Ssid.SsidLength = pAdapter->CommonCfg.SsidLen;
-			memcpy(Ssid.Ssid, pAdapter->CommonCfg.Ssid,	Ssid.SsidLength);
-            wrq->u.data.length = sizeof(NDIS_802_11_SSID);
-            Status = copy_to_user(wrq->u.data.pointer, &Ssid, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_SSID (Len=%d, ssid=%s)\n", Ssid.SsidLength,Ssid.Ssid));
-            break;
-        case RT_OID_802_11_QUERY_LINK_STATUS:
-            pLinkStatus = (RT_802_11_LINK_STATUS *) kmalloc(sizeof(RT_802_11_LINK_STATUS), MEM_ALLOC_FLAG);
-            if (pLinkStatus)
-            {
-                pLinkStatus->CurrTxRate = RateIdTo500Kbps[pAdapter->CommonCfg.TxRate];   // unit : 500 kbps
-                pLinkStatus->ChannelQuality = pAdapter->Mlme.ChannelQuality;
-                pLinkStatus->RxByteCount = pAdapter->RalinkCounters.ReceivedByteCount;
-                pLinkStatus->TxByteCount = pAdapter->RalinkCounters.TransmittedByteCount;
-        		pLinkStatus->CentralChannel = pAdapter->CommonCfg.CentralChannel;
-                wrq->u.data.length = sizeof(RT_802_11_LINK_STATUS);
-                Status = copy_to_user(wrq->u.data.pointer, pLinkStatus, wrq->u.data.length);
-                kfree(pLinkStatus);
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_LINK_STATUS\n"));
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_LINK_STATUS(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-        case OID_802_11_CONFIGURATION:
-            pConfiguration = (NDIS_802_11_CONFIGURATION *) kmalloc(sizeof(NDIS_802_11_CONFIGURATION), MEM_ALLOC_FLAG);
-            if (pConfiguration)
-            {
-                pConfiguration->Length = sizeof(NDIS_802_11_CONFIGURATION);
-                pConfiguration->BeaconPeriod = pAdapter->CommonCfg.BeaconPeriod;
-                pConfiguration->ATIMWindow = pAdapter->StaActive.AtimWin;
-                MAP_CHANNEL_ID_TO_KHZ(pAdapter->CommonCfg.Channel, pConfiguration->DSConfig);
-                wrq->u.data.length = sizeof(NDIS_802_11_CONFIGURATION);
-                Status = copy_to_user(wrq->u.data.pointer, pConfiguration, wrq->u.data.length);
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_CONFIGURATION(BeaconPeriod=%ld,AtimW=%ld,Channel=%d) \n",
-                                        pConfiguration->BeaconPeriod, pConfiguration->ATIMWindow, pAdapter->CommonCfg.Channel));
-				kfree(pConfiguration);
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_CONFIGURATION(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-		case RT_OID_802_11_SNR_0:
-			if ((pAdapter->StaCfg.LastSNR0 > 0))
-			{
-				ulInfo = ((0xeb	- pAdapter->StaCfg.LastSNR0) * 3) /	16 ;
-				wrq->u.data.length = sizeof(ulInfo);
-				Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-				DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_SNR_0(0x=%lx)\n", ulInfo));
-			}
-            else
-			    Status = -EFAULT;
-			break;
-		case RT_OID_802_11_SNR_1:
-			if ((pAdapter->Antenna.field.RxPath	> 1) &&
-                (pAdapter->StaCfg.LastSNR1 > 0))
-			{
-				ulInfo = ((0xeb	- pAdapter->StaCfg.LastSNR1) * 3) /	16 ;
-				wrq->u.data.length = sizeof(ulInfo);
-				Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-				DBGPRINT(RT_DEBUG_TRACE,("Query::RT_OID_802_11_SNR_1(0x=%lx)\n",ulInfo));
-			}
-			else
-				Status = -EFAULT;
-            DBGPRINT(RT_DEBUG_TRACE,("Query::RT_OID_802_11_SNR_1(pAdapter->StaCfg.LastSNR1=%d)\n",pAdapter->StaCfg.LastSNR1));
-			break;
-        case OID_802_11_RSSI_TRIGGER:
-            ulInfo = pAdapter->StaCfg.RssiSample.LastRssi0 - pAdapter->BbpRssiToDbmDelta;
-            wrq->u.data.length = sizeof(ulInfo);
-            Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_RSSI_TRIGGER(=%ld)\n", ulInfo));
-            break;
-		case OID_802_11_RSSI:
-        case RT_OID_802_11_RSSI:
-			ulInfo = pAdapter->StaCfg.RssiSample.LastRssi0;
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-			break;
-		case RT_OID_802_11_RSSI_1:
-            ulInfo = pAdapter->StaCfg.RssiSample.LastRssi1;
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-			break;
-        case RT_OID_802_11_RSSI_2:
-            ulInfo = pAdapter->StaCfg.RssiSample.LastRssi2;
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-			break;
-        case OID_802_11_STATISTICS:
-            pStatistics = (NDIS_802_11_STATISTICS *) kmalloc(sizeof(NDIS_802_11_STATISTICS), MEM_ALLOC_FLAG);
-            if (pStatistics)
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_STATISTICS \n"));
-                // add the most up-to-date h/w raw counters into software counters
-			    NICUpdateRawCounters(pAdapter);
-
-                // Sanity check for calculation of sucessful count
-                if (pAdapter->WlanCounters.TransmittedFragmentCount.QuadPart < pAdapter->WlanCounters.RetryCount.QuadPart)
-                    pAdapter->WlanCounters.TransmittedFragmentCount.QuadPart = pAdapter->WlanCounters.RetryCount.QuadPart;
-
-                pStatistics->TransmittedFragmentCount.QuadPart = pAdapter->WlanCounters.TransmittedFragmentCount.QuadPart;
-                pStatistics->MulticastTransmittedFrameCount.QuadPart = pAdapter->WlanCounters.MulticastTransmittedFrameCount.QuadPart;
-                pStatistics->FailedCount.QuadPart = pAdapter->WlanCounters.FailedCount.QuadPart;
-                pStatistics->RetryCount.QuadPart = pAdapter->WlanCounters.RetryCount.QuadPart;
-                pStatistics->MultipleRetryCount.QuadPart = pAdapter->WlanCounters.MultipleRetryCount.QuadPart;
-                pStatistics->RTSSuccessCount.QuadPart = pAdapter->WlanCounters.RTSSuccessCount.QuadPart;
-                pStatistics->RTSFailureCount.QuadPart = pAdapter->WlanCounters.RTSFailureCount.QuadPart;
-                pStatistics->ACKFailureCount.QuadPart = pAdapter->WlanCounters.ACKFailureCount.QuadPart;
-                pStatistics->FrameDuplicateCount.QuadPart = pAdapter->WlanCounters.FrameDuplicateCount.QuadPart;
-                pStatistics->ReceivedFragmentCount.QuadPart = pAdapter->WlanCounters.ReceivedFragmentCount.QuadPart;
-                pStatistics->MulticastReceivedFrameCount.QuadPart = pAdapter->WlanCounters.MulticastReceivedFrameCount.QuadPart;
-#ifdef DBG
-                pStatistics->FCSErrorCount = pAdapter->RalinkCounters.RealFcsErrCount;
-#else
-                pStatistics->FCSErrorCount.QuadPart = pAdapter->WlanCounters.FCSErrorCount.QuadPart;
-                pStatistics->FrameDuplicateCount.u.LowPart = pAdapter->WlanCounters.FrameDuplicateCount.u.LowPart / 100;
-#endif
-                wrq->u.data.length = sizeof(NDIS_802_11_STATISTICS);
-                Status = copy_to_user(wrq->u.data.pointer, pStatistics, wrq->u.data.length);
-                kfree(pStatistics);
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_STATISTICS(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-        case OID_GEN_RCV_OK:
-            ulInfo = pAdapter->Counters8023.GoodReceives;
-            wrq->u.data.length = sizeof(ulInfo);
-            Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-            break;
-        case OID_GEN_RCV_NO_BUFFER:
-            ulInfo = pAdapter->Counters8023.RxNoBuffer;
-            wrq->u.data.length = sizeof(ulInfo);
-            Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-            break;
-        case RT_OID_802_11_PHY_MODE:
-            ulInfo = (ULONG)pAdapter->CommonCfg.PhyMode;
-            wrq->u.data.length = sizeof(ulInfo);
-            Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_PHY_MODE (=%ld)\n", ulInfo));
-            break;
-        case RT_OID_802_11_STA_CONFIG:
-            pStaConfig = (RT_802_11_STA_CONFIG *) kmalloc(sizeof(RT_802_11_STA_CONFIG), MEM_ALLOC_FLAG);
-            if (pStaConfig)
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_STA_CONFIG\n"));
-                pStaConfig->EnableTxBurst = pAdapter->CommonCfg.bEnableTxBurst;
-                pStaConfig->EnableTurboRate = 0;
-                pStaConfig->UseBGProtection = pAdapter->CommonCfg.UseBGProtection;
-                pStaConfig->UseShortSlotTime = pAdapter->CommonCfg.bUseShortSlotTime;
-                //pStaConfig->AdhocMode = pAdapter->StaCfg.AdhocMode;
-                pStaConfig->HwRadioStatus = (pAdapter->StaCfg.bHwRadio == TRUE) ? 1 : 0;
-                pStaConfig->Rsv1 = 0;
-                pStaConfig->SystemErrorBitmap = pAdapter->SystemErrorBitmap;
-                wrq->u.data.length = sizeof(RT_802_11_STA_CONFIG);
-                Status = copy_to_user(wrq->u.data.pointer, pStaConfig, wrq->u.data.length);
-                kfree(pStaConfig);
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_STA_CONFIG(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-        case OID_802_11_RTS_THRESHOLD:
-            RtsThresh = pAdapter->CommonCfg.RtsThreshold;
-            wrq->u.data.length = sizeof(RtsThresh);
-            Status = copy_to_user(wrq->u.data.pointer, &RtsThresh, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_RTS_THRESHOLD(=%ld)\n", RtsThresh));
-            break;
-        case OID_802_11_FRAGMENTATION_THRESHOLD:
-            FragThresh = pAdapter->CommonCfg.FragmentThreshold;
-            if (pAdapter->CommonCfg.bUseZeroToDisableFragment == TRUE)
-                FragThresh = 0;
-            wrq->u.data.length = sizeof(FragThresh);
-            Status = copy_to_user(wrq->u.data.pointer, &FragThresh, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_FRAGMENTATION_THRESHOLD(=%ld)\n", FragThresh));
-            break;
-        case OID_802_11_POWER_MODE:
-            PowerMode = pAdapter->StaCfg.WindowsPowerMode;
-            wrq->u.data.length = sizeof(PowerMode);
-            Status = copy_to_user(wrq->u.data.pointer, &PowerMode, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_POWER_MODE(=%d)\n", PowerMode));
-            break;
-        case RT_OID_802_11_RADIO:
-            RadioState = (BOOLEAN) pAdapter->StaCfg.bSwRadio;
-            wrq->u.data.length = sizeof(RadioState);
-            Status = copy_to_user(wrq->u.data.pointer, &RadioState, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_RADIO (=%d)\n", RadioState));
-            break;
-        case OID_802_11_INFRASTRUCTURE_MODE:
-            if (pAdapter->StaCfg.BssType == BSS_ADHOC)
-                BssType = Ndis802_11IBSS;
-            else if (pAdapter->StaCfg.BssType == BSS_INFRA)
-                BssType = Ndis802_11Infrastructure;
-            else if (pAdapter->StaCfg.BssType == BSS_MONITOR)
-                BssType = Ndis802_11Monitor;
-            else
-                BssType = Ndis802_11AutoUnknown;
-
-            wrq->u.data.length = sizeof(BssType);
-            Status = copy_to_user(wrq->u.data.pointer, &BssType, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_INFRASTRUCTURE_MODE(=%d)\n", BssType));
-            break;
-        case RT_OID_802_11_PREAMBLE:
-            PreamType = pAdapter->CommonCfg.TxPreamble;
-            wrq->u.data.length = sizeof(PreamType);
-            Status = copy_to_user(wrq->u.data.pointer, &PreamType, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_PREAMBLE(=%d)\n", PreamType));
-            break;
-        case OID_802_11_AUTHENTICATION_MODE:
-            AuthMode = pAdapter->StaCfg.AuthMode;
-            wrq->u.data.length = sizeof(AuthMode);
-            Status = copy_to_user(wrq->u.data.pointer, &AuthMode, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_AUTHENTICATION_MODE(=%d)\n", AuthMode));
-            break;
-        case OID_802_11_WEP_STATUS:
-            WepStatus = pAdapter->StaCfg.WepStatus;
-            wrq->u.data.length = sizeof(WepStatus);
-            Status = copy_to_user(wrq->u.data.pointer, &WepStatus, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_WEP_STATUS(=%d)\n", WepStatus));
-            break;
-        case OID_802_11_TX_POWER_LEVEL:
-			wrq->u.data.length = sizeof(ULONG);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.TxPower, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_TX_POWER_LEVEL %x\n",pAdapter->CommonCfg.TxPower));
-			break;
-        case RT_OID_802_11_TX_POWER_LEVEL_1:
-            wrq->u.data.length = sizeof(ULONG);
-            Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.TxPowerPercentage, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_TX_POWER_LEVEL_1 (=%ld)\n", pAdapter->CommonCfg.TxPowerPercentage));
-			break;
-        case OID_802_11_NETWORK_TYPES_SUPPORTED:
-			if ((pAdapter->RfIcType	== RFIC_2850) || (pAdapter->RfIcType ==	RFIC_2750))
-			{
-				NetworkTypeList[0] = 3;                 // NumberOfItems = 3
-				NetworkTypeList[1] = Ndis802_11DS;      // NetworkType[1] = 11b
-				NetworkTypeList[2] = Ndis802_11OFDM24;  // NetworkType[2] = 11g
-				NetworkTypeList[3] = Ndis802_11OFDM5;   // NetworkType[3] = 11a
-                wrq->u.data.length = 16;
-				Status = copy_to_user(wrq->u.data.pointer, &NetworkTypeList[0], wrq->u.data.length);
-			}
-			else
-			{
-				NetworkTypeList[0] = 2;                 // NumberOfItems = 2
-				NetworkTypeList[1] = Ndis802_11DS;      // NetworkType[1] = 11b
-				NetworkTypeList[2] = Ndis802_11OFDM24;  // NetworkType[2] = 11g
-			    wrq->u.data.length = 12;
-				Status = copy_to_user(wrq->u.data.pointer, &NetworkTypeList[0], wrq->u.data.length);
-			}
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_NETWORK_TYPES_SUPPORTED\n"));
-				break;
-	    case OID_802_11_NETWORK_TYPE_IN_USE:
-            wrq->u.data.length = sizeof(ULONG);
-			if (pAdapter->CommonCfg.PhyMode == PHY_11A)
-				ulInfo = Ndis802_11OFDM5;
-			else if ((pAdapter->CommonCfg.PhyMode == PHY_11BG_MIXED) || (pAdapter->CommonCfg.PhyMode == PHY_11G))
-				ulInfo = Ndis802_11OFDM24;
-			else
-				ulInfo = Ndis802_11DS;
-            Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-			break;
-        case RT_OID_802_11_QUERY_LAST_RX_RATE:
-            ulInfo = (ULONG)pAdapter->LastRxRate;
-            wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_LAST_RX_RATE (=%ld)\n", ulInfo));
-			break;
-		case RT_OID_802_11_QUERY_LAST_TX_RATE:
-			//ulInfo = (ULONG)pAdapter->LastTxRate;
-			ulInfo = (ULONG)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.word;
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_LAST_TX_RATE (=%lx)\n", ulInfo));
-			break;
-        case RT_OID_802_11_QUERY_EEPROM_VERSION:
-            wrq->u.data.length = sizeof(ULONG);
-            Status = copy_to_user(wrq->u.data.pointer, &pAdapter->EepromVersion, wrq->u.data.length);
-            break;
-        case RT_OID_802_11_QUERY_FIRMWARE_VERSION:
-            wrq->u.data.length = sizeof(ULONG);
-            Status = copy_to_user(wrq->u.data.pointer, &pAdapter->FirmwareVersion, wrq->u.data.length);
-			break;
-	    case RT_OID_802_11_QUERY_NOISE_LEVEL:
-			wrq->u.data.length = sizeof(UCHAR);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->BbpWriteLatch[66], wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_NOISE_LEVEL (=%d)\n", pAdapter->BbpWriteLatch[66]));
-			break;
-	    case RT_OID_802_11_EXTRA_INFO:
-			wrq->u.data.length = sizeof(ULONG);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->ExtraInfo, wrq->u.data.length);
-	        DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_EXTRA_INFO (=%ld)\n", pAdapter->ExtraInfo));
-	        break;
-	    case RT_OID_WE_VERSION_COMPILED:
-	        wrq->u.data.length = sizeof(UINT);
-	        we_version_compiled = WIRELESS_EXT;
-	        Status = copy_to_user(wrq->u.data.pointer, &we_version_compiled, wrq->u.data.length);
-	        break;
-		case RT_OID_802_11_QUERY_APSD_SETTING:
-			apsd = (pAdapter->CommonCfg.bAPSDCapable | (pAdapter->CommonCfg.bAPSDAC_BE << 1) | (pAdapter->CommonCfg.bAPSDAC_BK << 2)
-				| (pAdapter->CommonCfg.bAPSDAC_VI << 3)	| (pAdapter->CommonCfg.bAPSDAC_VO << 4)	| (pAdapter->CommonCfg.MaxSPLength << 5));
-
-			wrq->u.data.length = sizeof(ULONG);
-			Status = copy_to_user(wrq->u.data.pointer, &apsd, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_APSD_SETTING (=0x%lx,APSDCap=%d,AC_BE=%d,AC_BK=%d,AC_VI=%d,AC_VO=%d,MAXSPLen=%d)\n",
-				apsd,pAdapter->CommonCfg.bAPSDCapable,pAdapter->CommonCfg.bAPSDAC_BE,pAdapter->CommonCfg.bAPSDAC_BK,pAdapter->CommonCfg.bAPSDAC_VI,pAdapter->CommonCfg.bAPSDAC_VO,pAdapter->CommonCfg.MaxSPLength));
-			break;
-		case RT_OID_802_11_QUERY_APSD_PSM:
-			wrq->u.data.length = sizeof(ULONG);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.bAPSDForcePowerSave, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_APSD_PSM (=%d)\n", pAdapter->CommonCfg.bAPSDForcePowerSave));
-			break;
-		case RT_OID_802_11_QUERY_WMM:
-			wrq->u.data.length = sizeof(BOOLEAN);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.bWmmCapable, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_WMM (=%d)\n",	pAdapter->CommonCfg.bWmmCapable));
-			break;
-#ifdef WPA_SUPPLICANT_SUPPORT
-        case RT_OID_NEW_DRIVER:
-            {
-                UCHAR enabled = 1;
-    	        wrq->u.data.length = sizeof(UCHAR);
-    	        Status = copy_to_user(wrq->u.data.pointer, &enabled, wrq->u.data.length);
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_NEW_DRIVER (=%d)\n", enabled));
-            }
-	        break;
-        case RT_OID_WPA_SUPPLICANT_SUPPORT:
-	        wrq->u.data.length = sizeof(UCHAR);
-	        Status = copy_to_user(wrq->u.data.pointer, &pAdapter->StaCfg.WpaSupplicantUP, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_WPA_SUPPLICANT_SUPPORT (=%d)\n", pAdapter->StaCfg.WpaSupplicantUP));
-	        break;
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-        case RT_OID_DRIVER_DEVICE_NAME:
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_DRIVER_DEVICE_NAME \n"));
-			wrq->u.data.length = 16;
-			if (copy_to_user(wrq->u.data.pointer, pAdapter->StaCfg.dev_name, wrq->u.data.length))
-			{
-				Status = -EFAULT;
-			}
-            break;
-        case RT_OID_802_11_QUERY_HT_PHYMODE:
-            pHTPhyMode = (OID_SET_HT_PHYMODE *) kmalloc(sizeof(OID_SET_HT_PHYMODE), MEM_ALLOC_FLAG);
-            if (pHTPhyMode)
-            {
-                pHTPhyMode->PhyMode = pAdapter->CommonCfg.PhyMode;
-    			pHTPhyMode->HtMode = (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE;
-    			pHTPhyMode->BW = (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.BW;
-    			pHTPhyMode->MCS= (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.MCS;
-    			pHTPhyMode->SHORTGI= (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.ShortGI;
-    			pHTPhyMode->STBC= (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.STBC;
-
-    			pHTPhyMode->ExtOffset = ((pAdapter->CommonCfg.CentralChannel < pAdapter->CommonCfg.Channel) ? (EXTCHA_BELOW) : (EXTCHA_ABOVE));
-                wrq->u.data.length = sizeof(OID_SET_HT_PHYMODE);
-                if (copy_to_user(wrq->u.data.pointer, pHTPhyMode, wrq->u.data.length))
-    			{
-    				Status = -EFAULT;
-    			}
-    			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_HT_PHYMODE (PhyMode = %d, MCS =%d, BW = %d, STBC = %d, ExtOffset=%d)\n",
-    				pHTPhyMode->HtMode, pHTPhyMode->MCS, pHTPhyMode->BW, pHTPhyMode->STBC, pHTPhyMode->ExtOffset));
-    			DBGPRINT(RT_DEBUG_TRACE, (" MlmeUpdateTxRates (.word = %x )\n", pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.word));
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_STA_CONFIG(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-        case RT_OID_802_11_COUNTRY_REGION:
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_COUNTRY_REGION \n"));
-			wrq->u.data.length = sizeof(ulInfo);
-            ulInfo = pAdapter->CommonCfg.CountryRegionForABand;
-            ulInfo = (ulInfo << 8)|(pAdapter->CommonCfg.CountryRegion);
-			if (copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length))
-            {
-				Status = -EFAULT;
-            }
-            break;
-        case RT_OID_802_11_QUERY_DAT_HT_PHYMODE:
-            pHTPhyMode = (OID_SET_HT_PHYMODE *) kmalloc(sizeof(OID_SET_HT_PHYMODE), MEM_ALLOC_FLAG);
-            if (pHTPhyMode)
-            {
-                pHTPhyMode->PhyMode = pAdapter->CommonCfg.PhyMode;
-    			pHTPhyMode->HtMode = (UCHAR)pAdapter->CommonCfg.RegTransmitSetting.field.HTMODE;
-    			pHTPhyMode->BW = (UCHAR)pAdapter->CommonCfg.RegTransmitSetting.field.BW;
-    			pHTPhyMode->MCS= (UCHAR)pAdapter->StaCfg.DesiredTransmitSetting.field.MCS;
-    			pHTPhyMode->SHORTGI= (UCHAR)pAdapter->CommonCfg.RegTransmitSetting.field.ShortGI;
-    			pHTPhyMode->STBC= (UCHAR)pAdapter->CommonCfg.RegTransmitSetting.field.STBC;
-
-                wrq->u.data.length = sizeof(OID_SET_HT_PHYMODE);
-                if (copy_to_user(wrq->u.data.pointer, pHTPhyMode, wrq->u.data.length))
-    			{
-    				Status = -EFAULT;
-    			}
-    			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_HT_PHYMODE (PhyMode = %d, MCS =%d, BW = %d, STBC = %d, ExtOffset=%d)\n",
-    				pHTPhyMode->HtMode, pHTPhyMode->MCS, pHTPhyMode->BW, pHTPhyMode->STBC, pHTPhyMode->ExtOffset));
-    			DBGPRINT(RT_DEBUG_TRACE, (" MlmeUpdateTxRates (.word = %x )\n", pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.word));
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_STA_CONFIG(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-        case RT_OID_QUERY_MULTIPLE_CARD_SUPPORT:
-			wrq->u.data.length = sizeof(UCHAR);
-            i = 0;
-#ifdef MULTIPLE_CARD_SUPPORT
-            i = 1;
-#endif // MULTIPLE_CARD_SUPPORT //
-			if (copy_to_user(wrq->u.data.pointer, &i, wrq->u.data.length))
-            {
-				Status = -EFAULT;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_QUERY_MULTIPLE_CARD_SUPPORT(=%d) \n", i));
-            break;
-#ifdef SNMP_SUPPORT
-		case RT_OID_802_11_MAC_ADDRESS:
-            wrq->u.data.length = MAC_ADDR_LEN;
-            Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CurrentAddress, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_MANUFACTUREROUI:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_MANUFACTUREROUI \n"));
-			wrq->u.data.length = ManufacturerOUI_LEN;
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CurrentAddress, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_MANUFACTURERNAME:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_MANUFACTURERNAME \n"));
-			wrq->u.data.length = strlen(ManufacturerNAME);
-			Status = copy_to_user(wrq->u.data.pointer, ManufacturerNAME, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_RESOURCETYPEIDNAME:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_RESOURCETYPEIDNAME \n"));
-			wrq->u.data.length = strlen(ResourceTypeIdName);
-			Status = copy_to_user(wrq->u.data.pointer, ResourceTypeIdName, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_PRIVACYOPTIONIMPLEMENTED:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_PRIVACYOPTIONIMPLEMENTED \n"));
-			ulInfo = 1; // 1 is support wep else 2 is not support.
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_POWERMANAGEMENTMODE:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_POWERMANAGEMENTMODE \n"));
-			if (pAdapter->StaCfg.Psm == PSMP_ACTION)
-				ulInfo = 1; // 1 is power active else 2 is power save.
-			else
-				ulInfo = 2;
-
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-			break;
-
-		case OID_802_11_WEPDEFAULTKEYVALUE:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_WEPDEFAULTKEYVALUE \n"));
-			//KeyIdxValue.KeyIdx = pAd->PortCfg.MBSSID[pAd->IoctlIF].DefaultKeyId;
-			pKeyIdxValue = wrq->u.data.pointer;
-			DBGPRINT(RT_DEBUG_TRACE,("KeyIdxValue.KeyIdx = %d, \n",pKeyIdxValue->KeyIdx));
-			valueLen = pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen;
-			NdisMoveMemory(pKeyIdxValue->Value,
-						   &pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].Key,
-						   valueLen);
-			pKeyIdxValue->Value[valueLen]='\0';
-
-			wrq->u.data.length = sizeof(DefaultKeyIdxValue);
-
-			Status = copy_to_user(wrq->u.data.pointer, pKeyIdxValue, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE,("DefaultKeyId = %d, total len = %d, str len=%d, KeyValue= %02x %02x %02x %02x \n", pAdapter->StaCfg.DefaultKeyId, wrq->u.data.length, pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen,
-			pAdapter->SharedKey[BSS0][0].Key[0],
-			pAdapter->SharedKey[BSS0][1].Key[0],
-			pAdapter->SharedKey[BSS0][2].Key[0],
-			pAdapter->SharedKey[BSS0][3].Key[0]));
-			break;
-
-		case OID_802_11_WEPDEFAULTKEYID:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_WEPDEFAULTKEYID \n"));
-			wrq->u.data.length = sizeof(UCHAR);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->StaCfg.DefaultKeyId, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("DefaultKeyId =%d \n", pAdapter->StaCfg.DefaultKeyId));
-			break;
-
-		case RT_OID_802_11_WEPKEYMAPPINGLENGTH:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_WEPKEYMAPPINGLENGTH \n"));
-			wrq->u.data.length = sizeof(UCHAR);
-			Status = copy_to_user(wrq->u.data.pointer,
-									&pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen,
-									wrq->u.data.length);
-			break;
-
-		case OID_802_11_SHORTRETRYLIMIT:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_SHORTRETRYLIMIT \n"));
-			wrq->u.data.length = sizeof(ULONG);
-			RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
-			ShortRetryLimit = tx_rty_cfg.field.ShortRtyLimit;
-			DBGPRINT(RT_DEBUG_TRACE, ("ShortRetryLimit =%ld,  tx_rty_cfg.field.ShortRetryLimit=%d\n", ShortRetryLimit, tx_rty_cfg.field.ShortRtyLimit));
-			Status = copy_to_user(wrq->u.data.pointer, &ShortRetryLimit, wrq->u.data.length);
-			break;
-
-		case OID_802_11_LONGRETRYLIMIT:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_LONGRETRYLIMIT \n"));
-			wrq->u.data.length = sizeof(ULONG);
-			RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
-			LongRetryLimit = tx_rty_cfg.field.LongRtyLimit;
-			DBGPRINT(RT_DEBUG_TRACE, ("LongRetryLimit =%ld,  tx_rty_cfg.field.LongRtyLimit=%d\n", LongRetryLimit, tx_rty_cfg.field.LongRtyLimit));
-			Status = copy_to_user(wrq->u.data.pointer, &LongRetryLimit, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_PRODUCTID:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_PRODUCTID \n"));
-
-#ifdef RT2870
-			sprintf(tmp, "%04x %04x\n", ((POS_COOKIE)pAdapter->OS_Cookie)->pUsb_Dev->descriptor.idVendor ,((POS_COOKIE)pAdapter->OS_Cookie)->pUsb_Dev->descriptor.idProduct);
-
-#endif // RT2870 //
-			wrq->u.data.length = strlen(tmp);
-			Status = copy_to_user(wrq->u.data.pointer, tmp, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_MANUFACTUREID:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_MANUFACTUREID \n"));
-			wrq->u.data.length = strlen(ManufacturerNAME);
-			Status = copy_to_user(wrq->u.data.pointer, ManufacturerNAME, wrq->u.data.length);
-			break;
-
-		case OID_802_11_CURRENTCHANNEL:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_CURRENTCHANNEL \n"));
-			wrq->u.data.length = sizeof(UCHAR);
-			DBGPRINT(RT_DEBUG_TRACE, ("sizeof UCHAR=%d, channel=%d \n", sizeof(UCHAR), pAdapter->CommonCfg.Channel));
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.Channel, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
-			break;
-#endif //SNMP_SUPPORT
-
-		case OID_802_11_BUILD_CHANNEL_EX:
-			{
-				UCHAR value;
-				DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_BUILD_CHANNEL_EX \n"));
-				wrq->u.data.length = sizeof(UCHAR);
-#ifdef EXT_BUILD_CHANNEL_LIST
-				DBGPRINT(RT_DEBUG_TRACE, ("Support EXT_BUILD_CHANNEL_LIST.\n"));
-				value = 1;
-#else
-				DBGPRINT(RT_DEBUG_TRACE, ("Doesn't support EXT_BUILD_CHANNEL_LIST.\n"));
-				value = 0;
-#endif // EXT_BUILD_CHANNEL_LIST //
-				Status = copy_to_user(wrq->u.data.pointer, &value, 1);
-				DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
-			}
-			break;
-
-		case OID_802_11_GET_CH_LIST:
-			{
-				PRT_CHANNEL_LIST_INFO pChListBuf;
-
-				DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_GET_CH_LIST \n"));
-				if (pAdapter->ChannelListNum == 0)
-				{
-					wrq->u.data.length = 0;
-					break;
-				}
-
-				pChListBuf = (RT_CHANNEL_LIST_INFO *) kmalloc(sizeof(RT_CHANNEL_LIST_INFO), MEM_ALLOC_FLAG);
-				if (pChListBuf == NULL)
-				{
-					wrq->u.data.length = 0;
-					break;
-				}
-
-				pChListBuf->ChannelListNum = pAdapter->ChannelListNum;
-				for (i = 0; i < pChListBuf->ChannelListNum; i++)
-					pChListBuf->ChannelList[i] = pAdapter->ChannelList[i].Channel;
-
-				wrq->u.data.length = sizeof(RT_CHANNEL_LIST_INFO);
-				Status = copy_to_user(wrq->u.data.pointer, pChListBuf, sizeof(RT_CHANNEL_LIST_INFO));
-				DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
-
-				if (pChListBuf)
-					kfree(pChListBuf);
-			}
-			break;
-
-		case OID_802_11_GET_COUNTRY_CODE:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_GET_COUNTRY_CODE \n"));
-			wrq->u.data.length = 2;
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.CountryCode, 2);
-			DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
-			break;
-
-		case OID_802_11_GET_CHANNEL_GEOGRAPHY:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_GET_CHANNEL_GEOGRAPHY \n"));
-			wrq->u.data.length = 1;
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.Geography, 1);
-			DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
-			break;
-
-
-#ifdef QOS_DLS_SUPPORT
-		case RT_OID_802_11_QUERY_DLS:
-			wrq->u.data.length = sizeof(BOOLEAN);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.bDLSCapable, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_DLS(=%d)\n", pAdapter->CommonCfg.bDLSCapable));
-			break;
-
-		case RT_OID_802_11_QUERY_DLS_PARAM:
-			{
-				PRT_802_11_DLS_INFO	pDlsInfo = kmalloc(sizeof(RT_802_11_DLS_INFO), GFP_ATOMIC);
-				if (pDlsInfo == NULL)
-					break;
-
-				for (i=0; i<MAX_NUM_OF_DLS_ENTRY; i++)
-				{
-					RTMPMoveMemory(&pDlsInfo->Entry[i], &pAdapter->StaCfg.DLSEntry[i], sizeof(RT_802_11_DLS_UI));
-				}
-
-				pDlsInfo->num = MAX_NUM_OF_DLS_ENTRY;
-				wrq->u.data.length = sizeof(RT_802_11_DLS_INFO);
-				Status = copy_to_user(wrq->u.data.pointer, pDlsInfo, wrq->u.data.length);
-				DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_DLS_PARAM\n"));
-
-				if (pDlsInfo)
-					kfree(pDlsInfo);
-			}
-			break;
-#endif // QOS_DLS_SUPPORT //
-        default:
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::unknown IOCTL's subcmd = 0x%08x\n", cmd));
-            Status = -EOPNOTSUPP;
-            break;
-    }
-    return Status;
-}
-
-INT rt28xx_sta_ioctl(
-	IN	struct net_device	*net_dev,
-	IN	OUT	struct ifreq	*rq,
-	IN	INT					cmd)
-{
-	POS_COOKIE			pObj;
-	VIRTUAL_ADAPTER		*pVirtualAd = NULL;
-	RTMP_ADAPTER        *pAd = NULL;
-	struct iwreq        *wrq = (struct iwreq *) rq;
-	BOOLEAN				StateMachineTouched = FALSE;
-	INT					Status = NDIS_STATUS_SUCCESS;
-	USHORT				subcmd;
-
-	if (net_dev->priv_flags == INT_MAIN)
-	{
-		pAd = net_dev->priv;
-	}
-	else
-	{
-		pVirtualAd = net_dev->priv;
-		pAd = pVirtualAd->RtmpDev->priv;
-	}
-	pObj = (POS_COOKIE) pAd->OS_Cookie;
-
-	if (pAd == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-    //check if the interface is down
-    if(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-#ifdef CONFIG_APSTA_MIXED_SUPPORT
-	    if (wrq->u.data.pointer == NULL)
-	    {
-		    return Status;
-	    }
-
-	    if (strstr(wrq->u.data.pointer, "OpMode") == NULL)
-#endif // CONFIG_APSTA_MIXED_SUPPORT //
-        {
-            DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-		    return -ENETDOWN;
-        }
-    }
-
-	{	// determine this ioctl command is comming from which interface.
-		pObj->ioctl_if_type = INT_MAIN;
-		pObj->ioctl_if = MAIN_MBSSID;
-	}
-
-	switch(cmd)
-	{
-#ifdef RALINK_ATE
-#ifdef RALINK_28xx_QA
-		case RTPRIV_IOCTL_ATE:
-			{
-				RtmpDoAte(pAd, wrq);
-			}
-			break;
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-        case SIOCGIFHWADDR:
-			DBGPRINT(RT_DEBUG_TRACE, ("IOCTL::SIOCGIFHWADDR\n"));
-			memcpy(wrq->u.name, pAd->CurrentAddress, ETH_ALEN);
-			break;
-		case SIOCGIWNAME:
-        {
-        	char *name=&wrq->u.name[0];
-        	rt_ioctl_giwname(net_dev, NULL, name, NULL);
-			break;
-		}
-		case SIOCGIWESSID:  //Get ESSID
-        {
-        	struct iw_point *essid=&wrq->u.essid;
-        	rt_ioctl_giwessid(net_dev, NULL, essid, essid->pointer);
-			break;
-		}
-		case SIOCSIWESSID:  //Set ESSID
-        {
-        	struct iw_point	*essid=&wrq->u.essid;
-        	rt_ioctl_siwessid(net_dev, NULL, essid, essid->pointer);
-			break;
-		}
-		case SIOCSIWNWID:   // set network id (the cell)
-		case SIOCGIWNWID:   // get network id
-			Status = -EOPNOTSUPP;
-			break;
-		case SIOCSIWFREQ:   //set channel/frequency (Hz)
-        {
-        	struct iw_freq *freq=&wrq->u.freq;
-        	rt_ioctl_siwfreq(net_dev, NULL, freq, NULL);
-			break;
-		}
-		case SIOCGIWFREQ:   // get channel/frequency (Hz)
-        {
-        	struct iw_freq *freq=&wrq->u.freq;
-        	rt_ioctl_giwfreq(net_dev, NULL, freq, NULL);
-			break;
-		}
-		case SIOCSIWNICKN: //set node name/nickname
-        {
-        	struct iw_point *data=&wrq->u.data;
-        	rt_ioctl_siwnickn(net_dev, NULL, data, NULL);
-			break;
-		}
-		case SIOCGIWNICKN: //get node name/nickname
-        {
-        	struct iw_point *data=&wrq->u.data;
-        	rt_ioctl_giwnickn(net_dev, NULL, data, NULL);
-			break;
-		}
-		case SIOCGIWRATE:   //get default bit rate (bps)
-		    rt_ioctl_giwrate(net_dev, NULL, &wrq->u, NULL);
-            break;
-	    case SIOCSIWRATE:  //set default bit rate (bps)
-	        rt_ioctl_siwrate(net_dev, NULL, &wrq->u, NULL);
-            break;
-        case SIOCGIWRTS:  // get RTS/CTS threshold (bytes)
-        {
-        	struct iw_param *rts=&wrq->u.rts;
-        	rt_ioctl_giwrts(net_dev, NULL, rts, NULL);
-			break;
-		}
-        case SIOCSIWRTS:  //set RTS/CTS threshold (bytes)
-        {
-        	struct iw_param *rts=&wrq->u.rts;
-        	rt_ioctl_siwrts(net_dev, NULL, rts, NULL);
-			break;
-		}
-        case SIOCGIWFRAG:  //get fragmentation thr (bytes)
-        {
-        	struct iw_param *frag=&wrq->u.frag;
-        	rt_ioctl_giwfrag(net_dev, NULL, frag, NULL);
-			break;
-		}
-        case SIOCSIWFRAG:  //set fragmentation thr (bytes)
-        {
-        	struct iw_param *frag=&wrq->u.frag;
-        	rt_ioctl_siwfrag(net_dev, NULL, frag, NULL);
-			break;
-		}
-        case SIOCGIWENCODE:  //get encoding token & mode
-        {
-        	struct iw_point *erq=&wrq->u.encoding;
-        	if(erq->pointer)
-        		rt_ioctl_giwencode(net_dev, NULL, erq, erq->pointer);
-			break;
-		}
-        case SIOCSIWENCODE:  //set encoding token & mode
-        {
-        	struct iw_point *erq=&wrq->u.encoding;
-        	if(erq->pointer)
-        		rt_ioctl_siwencode(net_dev, NULL, erq, erq->pointer);
-			break;
-		}
-		case SIOCGIWAP:     //get access point MAC addresses
-        {
-        	struct sockaddr *ap_addr=&wrq->u.ap_addr;
-        	rt_ioctl_giwap(net_dev, NULL, ap_addr, ap_addr->sa_data);
-			break;
-		}
-	    case SIOCSIWAP:  //set access point MAC addresses
-        {
-        	struct sockaddr *ap_addr=&wrq->u.ap_addr;
-        	rt_ioctl_siwap(net_dev, NULL, ap_addr, ap_addr->sa_data);
-			break;
-		}
-		case SIOCGIWMODE:   //get operation mode
-        {
-        	__u32 *mode=&wrq->u.mode;
-        	rt_ioctl_giwmode(net_dev, NULL, mode, NULL);
-			break;
-		}
-		case SIOCSIWMODE:   //set operation mode
-        {
-        	__u32 *mode=&wrq->u.mode;
-        	rt_ioctl_siwmode(net_dev, NULL, mode, NULL);
-			break;
-		}
-		case SIOCGIWSENS:   //get sensitivity (dBm)
-		case SIOCSIWSENS:	//set sensitivity (dBm)
-		case SIOCGIWPOWER:  //get Power Management settings
-		case SIOCSIWPOWER:  //set Power Management settings
-		case SIOCGIWTXPOW:  //get transmit power (dBm)
-		case SIOCSIWTXPOW:  //set transmit power (dBm)
-		case SIOCGIWRANGE:	//Get range of parameters
-		case SIOCGIWRETRY:	//get retry limits and lifetime
-		case SIOCSIWRETRY:	//set retry limits and lifetime
-			Status = -EOPNOTSUPP;
-			break;
-		case RT_PRIV_IOCTL:
-			subcmd = wrq->u.data.flags;
-			if( subcmd & OID_GET_SET_TOGGLE)
-				Status = RTMPSetInformation(pAd, rq, subcmd);
-			else
-				Status = RTMPQueryInformation(pAd, rq, subcmd);
-			break;
-		case SIOCGIWPRIV:
-			if (wrq->u.data.pointer)
-			{
-				if ( access_ok(VERIFY_WRITE, wrq->u.data.pointer, sizeof(privtab)) != TRUE)
-					break;
-				wrq->u.data.length = sizeof(privtab) / sizeof(privtab[0]);
-				if (copy_to_user(wrq->u.data.pointer, privtab, sizeof(privtab)))
-					Status = -EFAULT;
-			}
-			break;
-		case RTPRIV_IOCTL_SET:
-			if(access_ok(VERIFY_READ, wrq->u.data.pointer, wrq->u.data.length) != TRUE)
-				break;
-			rt_ioctl_setparam(net_dev, NULL, NULL, wrq->u.data.pointer);
-			break;
-		case RTPRIV_IOCTL_GSITESURVEY:
-			RTMPIoctlGetSiteSurvey(pAd, wrq);
-		    break;
-#ifdef DBG
-		case RTPRIV_IOCTL_MAC:
-			RTMPIoctlMAC(pAd, wrq);
-			break;
-		case RTPRIV_IOCTL_E2P:
-			RTMPIoctlE2PROM(pAd, wrq);
-			break;
-#endif // DBG //
-        case SIOCETHTOOL:
-                break;
-		default:
-			DBGPRINT(RT_DEBUG_ERROR, ("IOCTL::unknown IOCTL's cmd = 0x%08x\n", cmd));
-			Status = -EOPNOTSUPP;
-			break;
-	}
-
-    if(StateMachineTouched) // Upper layer sent a MLME-related operations
-    	RT28XX_MLME_HANDLER(pAd);
-
-	return Status;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set SSID
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_SSID_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    NDIS_802_11_SSID                    Ssid, *pSsid=NULL;
-    BOOLEAN                             StateMachineTouched = FALSE;
-    int                                 success = TRUE;
-
-    if( strlen(arg) <= MAX_LEN_OF_SSID)
-    {
-        NdisZeroMemory(&Ssid, sizeof(NDIS_802_11_SSID));
-        if (strlen(arg) != 0)
-        {
-            NdisMoveMemory(Ssid.Ssid, arg, strlen(arg));
-            Ssid.SsidLength = strlen(arg);
-        }
-        else   //ANY ssid
-        {
-            Ssid.SsidLength = 0;
-		    memcpy(Ssid.Ssid, "", 0);
-			pAdapter->StaCfg.BssType = BSS_INFRA;
-			pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
-	        pAdapter->StaCfg.WepStatus  = Ndis802_11EncryptionDisabled;
-		}
-        pSsid = &Ssid;
-
-        if (pAdapter->Mlme.CntlMachine.CurrState != CNTL_IDLE)
-        {
-            RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-            DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
-        }
-
-        pAdapter->MlmeAux.CurrReqIsFromNdis = TRUE;
-        pAdapter->StaCfg.bScanReqIsFromWebUI = FALSE;
-		pAdapter->bConfigChanged = TRUE;
-
-        MlmeEnqueue(pAdapter,
-                    MLME_CNTL_STATE_MACHINE,
-                    OID_802_11_SSID,
-                    sizeof(NDIS_802_11_SSID),
-                    (VOID *)pSsid);
-
-        StateMachineTouched = TRUE;
-        DBGPRINT(RT_DEBUG_TRACE, ("Set_SSID_Proc::(Len=%d,Ssid=%s)\n", Ssid.SsidLength, Ssid.Ssid));
-    }
-    else
-        success = FALSE;
-
-    if (StateMachineTouched) // Upper layer sent a MLME-related operations
-    	RT28XX_MLME_HANDLER(pAdapter);
-
-    return success;
-}
-
-#ifdef WMM_SUPPORT
-/*
-    ==========================================================================
-    Description:
-        Set WmmCapable Enable or Disable
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_WmmCapable_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	BOOLEAN	bWmmCapable;
-
-	bWmmCapable = simple_strtol(arg, 0, 10);
-
-	if ((bWmmCapable == 1)
-#ifdef RT2870
-		&& (pAd->NumberOfPipes >= 5)
-#endif // RT2870 //
-		)
-		pAd->CommonCfg.bWmmCapable = TRUE;
-	else if (bWmmCapable == 0)
-		pAd->CommonCfg.bWmmCapable = FALSE;
-	else
-		return FALSE;  //Invalid argument
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_WmmCapable_Proc::(bWmmCapable=%d)\n",
-		pAd->CommonCfg.bWmmCapable));
-
-	return TRUE;
-}
-#endif // WMM_SUPPORT //
-
-/*
-    ==========================================================================
-    Description:
-        Set Network Type(Infrastructure/Adhoc mode)
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_NetworkType_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    UINT32	Value = 0;
-
-    if (strcmp(arg, "Adhoc") == 0)
-	{
-		if (pAdapter->StaCfg.BssType != BSS_ADHOC)
-		{
-			// Config has changed
-			pAdapter->bConfigChanged = TRUE;
-            if (MONITOR_ON(pAdapter))
-            {
-                RTMP_IO_WRITE32(pAdapter, RX_FILTR_CFG, STANORMAL);
-                RTMP_IO_READ32(pAdapter, MAC_SYS_CTRL, &Value);
-				Value &= (~0x80);
-				RTMP_IO_WRITE32(pAdapter, MAC_SYS_CTRL, Value);
-                OPSTATUS_CLEAR_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED);
-                pAdapter->StaCfg.bAutoReconnect = TRUE;
-                LinkDown(pAdapter, FALSE);
-            }
-			if (INFRA_ON(pAdapter))
-			{
-				//BOOLEAN Cancelled;
-				// Set the AutoReconnectSsid to prevent it reconnect to old SSID
-				// Since calling this indicate user don't want to connect to that SSID anymore.
-				pAdapter->MlmeAux.AutoReconnectSsidLen= 32;
-				NdisZeroMemory(pAdapter->MlmeAux.AutoReconnectSsid, pAdapter->MlmeAux.AutoReconnectSsidLen);
-
-				LinkDown(pAdapter, FALSE);
-
-				DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event BB!\n"));
-			}
-		}
-		pAdapter->StaCfg.BssType = BSS_ADHOC;
-        pAdapter->net_dev->type = pAdapter->StaCfg.OriDevType;
-		DBGPRINT(RT_DEBUG_TRACE, ("===>Set_NetworkType_Proc::(AD-HOC)\n"));
-	}
-    else if (strcmp(arg, "Infra") == 0)
-	{
-		if (pAdapter->StaCfg.BssType != BSS_INFRA)
-		{
-			// Config has changed
-			pAdapter->bConfigChanged = TRUE;
-            if (MONITOR_ON(pAdapter))
-            {
-                RTMP_IO_WRITE32(pAdapter, RX_FILTR_CFG, STANORMAL);
-                RTMP_IO_READ32(pAdapter, MAC_SYS_CTRL, &Value);
-				Value &= (~0x80);
-				RTMP_IO_WRITE32(pAdapter, MAC_SYS_CTRL, Value);
-                OPSTATUS_CLEAR_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED);
-                pAdapter->StaCfg.bAutoReconnect = TRUE;
-                LinkDown(pAdapter, FALSE);
-            }
-			if (ADHOC_ON(pAdapter))
-			{
-				// Set the AutoReconnectSsid to prevent it reconnect to old SSID
-				// Since calling this indicate user don't want to connect to that SSID anymore.
-				pAdapter->MlmeAux.AutoReconnectSsidLen= 32;
-				NdisZeroMemory(pAdapter->MlmeAux.AutoReconnectSsid, pAdapter->MlmeAux.AutoReconnectSsidLen);
-
-				LinkDown(pAdapter, FALSE);
-			}
-		}
-		pAdapter->StaCfg.BssType = BSS_INFRA;
-        pAdapter->net_dev->type = pAdapter->StaCfg.OriDevType;
-		DBGPRINT(RT_DEBUG_TRACE, ("===>Set_NetworkType_Proc::(INFRA)\n"));
-
-        pAdapter->StaCfg.BssType = BSS_INFRA;
-	}
-    else if (strcmp(arg, "Monitor") == 0)
-    {
-		UCHAR	bbpValue = 0;
-		BCN_TIME_CFG_STRUC csr;
-		OPSTATUS_CLEAR_FLAG(pAdapter, fOP_STATUS_INFRA_ON);
-        OPSTATUS_CLEAR_FLAG(pAdapter, fOP_STATUS_ADHOC_ON);
-		OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED);
-		// disable all periodic state machine
-		pAdapter->StaCfg.bAutoReconnect = FALSE;
-		// reset all mlme state machine
-		RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-		DBGPRINT(RT_DEBUG_TRACE, ("fOP_STATUS_MEDIA_STATE_CONNECTED \n"));
-        if (pAdapter->CommonCfg.CentralChannel == 0)
-        {
-#ifdef DOT11_N_SUPPORT
-            if (pAdapter->CommonCfg.PhyMode == PHY_11AN_MIXED)
-                pAdapter->CommonCfg.CentralChannel = 36;
-            else
-#endif // DOT11_N_SUPPORT //
-                pAdapter->CommonCfg.CentralChannel = 6;
-        }
-#ifdef DOT11_N_SUPPORT
-        else
-            N_ChannelCheck(pAdapter);
-#endif // DOT11_N_SUPPORT //
-
-#ifdef DOT11_N_SUPPORT
-	if (pAdapter->CommonCfg.PhyMode >= PHY_11ABGN_MIXED &&
-            pAdapter->CommonCfg.RegTransmitSetting.field.BW == BW_40 &&
-            pAdapter->CommonCfg.RegTransmitSetting.field.EXTCHA == EXTCHA_ABOVE)
-		{
-			// 40MHz ,control channel at lower
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R4, &bbpValue);
-			bbpValue &= (~0x18);
-			bbpValue |= 0x10;
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R4, bbpValue);
-			pAdapter->CommonCfg.BBPCurrentBW = BW_40;
-			//  RX : control channel at lower
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R3, &bbpValue);
-			bbpValue &= (~0x20);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R3, bbpValue);
-
-			RTMP_IO_READ32(pAdapter, TX_BAND_CFG, &Value);
-			Value &= 0xfffffffe;
-			RTMP_IO_WRITE32(pAdapter, TX_BAND_CFG, Value);
-			pAdapter->CommonCfg.CentralChannel = pAdapter->CommonCfg.Channel + 2;
-            AsicSwitchChannel(pAdapter, pAdapter->CommonCfg.CentralChannel, FALSE);
-		    AsicLockChannel(pAdapter, pAdapter->CommonCfg.CentralChannel);
-            DBGPRINT(RT_DEBUG_TRACE, ("BW_40 ,control_channel(%d), CentralChannel(%d) \n",
-                                       pAdapter->CommonCfg.Channel,
-                                       pAdapter->CommonCfg.CentralChannel));
-		}
-		else if (pAdapter->CommonCfg.PhyMode >= PHY_11ABGN_MIXED &&
-                 pAdapter->CommonCfg.RegTransmitSetting.field.BW == BW_40 &&
-                 pAdapter->CommonCfg.RegTransmitSetting.field.EXTCHA == EXTCHA_BELOW)
-		{
-			// 40MHz ,control channel at upper
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R4, &bbpValue);
-			bbpValue &= (~0x18);
-			bbpValue |= 0x10;
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R4, bbpValue);
-			pAdapter->CommonCfg.BBPCurrentBW = BW_40;
-			RTMP_IO_READ32(pAdapter, TX_BAND_CFG, &Value);
-			Value |= 0x1;
-			RTMP_IO_WRITE32(pAdapter, TX_BAND_CFG, Value);
-
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R3, &bbpValue);
-			bbpValue |= (0x20);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R3, bbpValue);
-			pAdapter->CommonCfg.CentralChannel = pAdapter->CommonCfg.Channel - 2;
-            AsicSwitchChannel(pAdapter, pAdapter->CommonCfg.CentralChannel, FALSE);
-		    AsicLockChannel(pAdapter, pAdapter->CommonCfg.CentralChannel);
-            DBGPRINT(RT_DEBUG_TRACE, ("BW_40 ,control_channel(%d), CentralChannel(%d) \n",
-                                       pAdapter->CommonCfg.Channel,
-                                       pAdapter->CommonCfg.CentralChannel));
-		}
-		else
-#endif // DOT11_N_SUPPORT //
-		{
-			// 20MHz
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R4, &bbpValue);
-			bbpValue &= (~0x18);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R4, bbpValue);
-			pAdapter->CommonCfg.BBPCurrentBW = BW_20;
-			AsicSwitchChannel(pAdapter, pAdapter->CommonCfg.Channel, FALSE);
-			AsicLockChannel(pAdapter, pAdapter->CommonCfg.Channel);
-			DBGPRINT(RT_DEBUG_TRACE, ("BW_20, Channel(%d)\n", pAdapter->CommonCfg.Channel));
-		}
-		// Enable Rx with promiscuous reception
-		RTMP_IO_WRITE32(pAdapter, RX_FILTR_CFG, 0x3);
-		// ASIC supporsts sniffer function with replacing RSSI with timestamp.
-		//RTMP_IO_READ32(pAdapter, MAC_SYS_CTRL, &Value);
-		//Value |= (0x80);
-		//RTMP_IO_WRITE32(pAdapter, MAC_SYS_CTRL, Value);
-		// disable sync
-		RTMP_IO_READ32(pAdapter, BCN_TIME_CFG, &csr.word);
-		csr.field.bBeaconGen = 0;
-		csr.field.bTBTTEnable = 0;
-		csr.field.TsfSyncMode = 0;
-		RTMP_IO_WRITE32(pAdapter, BCN_TIME_CFG, csr.word);
-
-		pAdapter->StaCfg.BssType = BSS_MONITOR;
-        pAdapter->net_dev->type = ARPHRD_IEEE80211_PRISM; //ARPHRD_IEEE80211; // IEEE80211
-		DBGPRINT(RT_DEBUG_TRACE, ("===>Set_NetworkType_Proc::(MONITOR)\n"));
-    }
-
-    // Reset Ralink supplicant to not use, it will be set to start when UI set PMK key
-    pAdapter->StaCfg.WpaState = SS_NOTUSE;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_NetworkType_Proc::(NetworkType=%d)\n", pAdapter->StaCfg.BssType));
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Authentication mode
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_AuthMode_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    if ((strcmp(arg, "WEPAUTO") == 0) || (strcmp(arg, "wepauto") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeAutoSwitch;
-    else if ((strcmp(arg, "OPEN") == 0) || (strcmp(arg, "open") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
-    else if ((strcmp(arg, "SHARED") == 0) || (strcmp(arg, "shared") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeShared;
-    else if ((strcmp(arg, "WPAPSK") == 0) || (strcmp(arg, "wpapsk") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPAPSK;
-    else if ((strcmp(arg, "WPANONE") == 0) || (strcmp(arg, "wpanone") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPANone;
-    else if ((strcmp(arg, "WPA2PSK") == 0) || (strcmp(arg, "wpa2psk") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2PSK;
-#ifdef WPA_SUPPLICANT_SUPPORT
-    else if ((strcmp(arg, "WPA") == 0) || (strcmp(arg, "wpa") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA;
-    else if ((strcmp(arg, "WPA2") == 0) || (strcmp(arg, "wpa2") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2;
-#endif // WPA_SUPPLICANT_SUPPORT //
-    else
-        return FALSE;
-
-    pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_AuthMode_Proc::(AuthMode=%d)\n", pAdapter->StaCfg.AuthMode));
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Encryption Type
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_EncrypType_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    if ((strcmp(arg, "NONE") == 0) || (strcmp(arg, "none") == 0))
-    {
-        if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-            return TRUE;    // do nothing
-
-        pAdapter->StaCfg.WepStatus     = Ndis802_11WEPDisabled;
-        pAdapter->StaCfg.PairCipher    = Ndis802_11WEPDisabled;
-	    pAdapter->StaCfg.GroupCipher   = Ndis802_11WEPDisabled;
-    }
-    else if ((strcmp(arg, "WEP") == 0) || (strcmp(arg, "wep") == 0))
-    {
-        if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-            return TRUE;    // do nothing
-
-        pAdapter->StaCfg.WepStatus     = Ndis802_11WEPEnabled;
-        pAdapter->StaCfg.PairCipher    = Ndis802_11WEPEnabled;
-	    pAdapter->StaCfg.GroupCipher   = Ndis802_11WEPEnabled;
-    }
-    else if ((strcmp(arg, "TKIP") == 0) || (strcmp(arg, "tkip") == 0))
-    {
-        if (pAdapter->StaCfg.AuthMode < Ndis802_11AuthModeWPA)
-            return TRUE;    // do nothing
-
-        pAdapter->StaCfg.WepStatus     = Ndis802_11Encryption2Enabled;
-        pAdapter->StaCfg.PairCipher    = Ndis802_11Encryption2Enabled;
-	    pAdapter->StaCfg.GroupCipher   = Ndis802_11Encryption2Enabled;
-    }
-    else if ((strcmp(arg, "AES") == 0) || (strcmp(arg, "aes") == 0))
-    {
-        if (pAdapter->StaCfg.AuthMode < Ndis802_11AuthModeWPA)
-            return TRUE;    // do nothing
-
-        pAdapter->StaCfg.WepStatus     = Ndis802_11Encryption3Enabled;
-        pAdapter->StaCfg.PairCipher    = Ndis802_11Encryption3Enabled;
-	    pAdapter->StaCfg.GroupCipher   = Ndis802_11Encryption3Enabled;
-    }
-    else
-        return FALSE;
-
-    pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_EncrypType_Proc::(EncrypType=%d)\n", pAdapter->StaCfg.WepStatus));
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Default Key ID
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_DefaultKeyID_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    ULONG                               KeyIdx;
-
-    KeyIdx = simple_strtol(arg, 0, 10);
-    if((KeyIdx >= 1 ) && (KeyIdx <= 4))
-        pAdapter->StaCfg.DefaultKeyId = (UCHAR) (KeyIdx - 1 );
-    else
-        return FALSE;  //Invalid argument
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_DefaultKeyID_Proc::(DefaultKeyID=%d)\n", pAdapter->StaCfg.DefaultKeyId));
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set WEP KEY1
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_Key1_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    int                                 KeyLen;
-    int                                 i;
-    UCHAR                               CipherAlg=CIPHER_WEP64;
-
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        return TRUE;    // do nothing
-
-    KeyLen = strlen(arg);
-
-    switch (KeyLen)
-    {
-        case 5: //wep 40 Ascii type
-            pAdapter->SharedKey[BSS0][0].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][0].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::(Key1=%s and type=%s)\n", arg, "Ascii"));
-            break;
-        case 10: //wep 40 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][0].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][0].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::(Key1=%s and type=%s)\n", arg, "Hex"));
-            break;
-        case 13: //wep 104 Ascii type
-            pAdapter->SharedKey[BSS0][0].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][0].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::(Key1=%s and type=%s)\n", arg, "Ascii"));
-            break;
-        case 26: //wep 104 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][0].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][0].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::(Key1=%s and type=%s)\n", arg, "Hex"));
-            break;
-        default: //Invalid argument
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::Invalid argument (=%s)\n", arg));
-            return FALSE;
-    }
-
-    pAdapter->SharedKey[BSS0][0].CipherAlg = CipherAlg;
-
-    // Set keys (into ASIC)
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        ;   // not support
-    else    // Old WEP stuff
-    {
-        AsicAddSharedKeyEntry(pAdapter,
-                              0,
-                              0,
-                              pAdapter->SharedKey[BSS0][0].CipherAlg,
-                              pAdapter->SharedKey[BSS0][0].Key,
-                              NULL,
-                              NULL);
-    }
-
-    return TRUE;
-}
-/*
-    ==========================================================================
-
-    Description:
-        Set WEP KEY2
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_Key2_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    int                                 KeyLen;
-    int                                 i;
-    UCHAR                               CipherAlg=CIPHER_WEP64;
-
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        return TRUE;    // do nothing
-
-    KeyLen = strlen(arg);
-
-    switch (KeyLen)
-    {
-        case 5: //wep 40 Ascii type
-            pAdapter->SharedKey[BSS0][1].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][1].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::(Key2=%s and type=%s)\n", arg, "Ascii"));
-            break;
-        case 10: //wep 40 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][1].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][1].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::(Key2=%s and type=%s)\n", arg, "Hex"));
-            break;
-        case 13: //wep 104 Ascii type
-            pAdapter->SharedKey[BSS0][1].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][1].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::(Key2=%s and type=%s)\n", arg, "Ascii"));
-            break;
-        case 26: //wep 104 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][1].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][1].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::(Key2=%s and type=%s)\n", arg, "Hex"));
-            break;
-        default: //Invalid argument
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::Invalid argument (=%s)\n", arg));
-            return FALSE;
-    }
-    pAdapter->SharedKey[BSS0][1].CipherAlg = CipherAlg;
-
-    // Set keys (into ASIC)
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        ;   // not support
-    else    // Old WEP stuff
-    {
-        AsicAddSharedKeyEntry(pAdapter,
-                              0,
-                              1,
-                              pAdapter->SharedKey[BSS0][1].CipherAlg,
-                              pAdapter->SharedKey[BSS0][1].Key,
-                              NULL,
-                              NULL);
-    }
-
-    return TRUE;
-}
-/*
-    ==========================================================================
-    Description:
-        Set WEP KEY3
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_Key3_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    int                                 KeyLen;
-    int                                 i;
-    UCHAR                               CipherAlg=CIPHER_WEP64;
-
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        return TRUE;    // do nothing
-
-    KeyLen = strlen(arg);
-
-    switch (KeyLen)
-    {
-        case 5: //wep 40 Ascii type
-            pAdapter->SharedKey[BSS0][2].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][2].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::(Key3=%s and type=Ascii)\n", arg));
-            break;
-        case 10: //wep 40 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][2].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][2].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::(Key3=%s and type=Hex)\n", arg));
-            break;
-        case 13: //wep 104 Ascii type
-            pAdapter->SharedKey[BSS0][2].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][2].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::(Key3=%s and type=Ascii)\n", arg));
-            break;
-        case 26: //wep 104 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][2].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][2].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::(Key3=%s and type=Hex)\n", arg));
-            break;
-        default: //Invalid argument
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::Invalid argument (=%s)\n", arg));
-            return FALSE;
-    }
-    pAdapter->SharedKey[BSS0][2].CipherAlg = CipherAlg;
-
-    // Set keys (into ASIC)
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        ;   // not support
-    else    // Old WEP stuff
-    {
-        AsicAddSharedKeyEntry(pAdapter,
-                              0,
-                              2,
-                              pAdapter->SharedKey[BSS0][2].CipherAlg,
-                              pAdapter->SharedKey[BSS0][2].Key,
-                              NULL,
-                              NULL);
-    }
-
-    return TRUE;
-}
-/*
-    ==========================================================================
-    Description:
-        Set WEP KEY4
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_Key4_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    int                                 KeyLen;
-    int                                 i;
-    UCHAR                               CipherAlg=CIPHER_WEP64;
-
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        return TRUE;    // do nothing
-
-    KeyLen = strlen(arg);
-
-    switch (KeyLen)
-    {
-        case 5: //wep 40 Ascii type
-            pAdapter->SharedKey[BSS0][3].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][3].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::(Key4=%s and type=%s)\n", arg, "Ascii"));
-            break;
-        case 10: //wep 40 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][3].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][3].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::(Key4=%s and type=%s)\n", arg, "Hex"));
-            break;
-        case 13: //wep 104 Ascii type
-            pAdapter->SharedKey[BSS0][3].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][3].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::(Key4=%s and type=%s)\n", arg, "Ascii"));
-            break;
-        case 26: //wep 104 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][3].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][3].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::(Key4=%s and type=%s)\n", arg, "Hex"));
-            break;
-        default: //Invalid argument
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::Invalid argument (=%s)\n", arg));
-            return FALSE;
-    }
-    pAdapter->SharedKey[BSS0][3].CipherAlg = CipherAlg;
-
-    // Set keys (into ASIC)
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        ;   // not support
-    else    // Old WEP stuff
-    {
-        AsicAddSharedKeyEntry(pAdapter,
-                              0,
-                              3,
-                              pAdapter->SharedKey[BSS0][3].CipherAlg,
-                              pAdapter->SharedKey[BSS0][3].Key,
-                              NULL,
-                              NULL);
-    }
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set WPA PSK key
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_WPAPSK_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    UCHAR                   keyMaterial[40];
-
-    if ((pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPAPSK) &&
-        (pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPA2PSK) &&
-	    (pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPANone)
-		)
-        return TRUE;    // do nothing
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_WPAPSK_Proc::(WPAPSK=%s)\n", arg));
-
-    NdisZeroMemory(keyMaterial, 40);
-
-    if ((strlen(arg) < 8) || (strlen(arg) > 64))
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("Set failed!!(WPAPSK=%s), WPAPSK key-string required 8 ~ 64 characters \n", arg));
-        return FALSE;
-    }
-
-    if (strlen(arg) == 64)
-    {
-        AtoH(arg, keyMaterial, 32);
-        NdisMoveMemory(pAdapter->StaCfg.PMK, keyMaterial, 32);
-
-    }
-    else
-    {
-        PasswordHash((char *)arg, pAdapter->MlmeAux.Ssid, pAdapter->MlmeAux.SsidLen, keyMaterial);
-        NdisMoveMemory(pAdapter->StaCfg.PMK, keyMaterial, 32);
-    }
-
-
-
-    if(pAdapter->StaCfg.BssType == BSS_ADHOC &&
-       pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
-    {
-         pAdapter->StaCfg.WpaState = SS_NOTUSE;
-    }
-    else
-    {
-        // Start STA supplicant state machine
-        pAdapter->StaCfg.WpaState = SS_START;
-    }
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Power Saving mode
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_PSMode_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    if (pAdapter->StaCfg.BssType == BSS_INFRA)
-    {
-        if ((strcmp(arg, "Max_PSP") == 0) ||
-			(strcmp(arg, "max_psp") == 0) ||
-			(strcmp(arg, "MAX_PSP") == 0))
-        {
-            // do NOT turn on PSM bit here, wait until MlmeCheckForPsmChange()
-            // to exclude certain situations.
-            if (pAdapter->StaCfg.bWindowsACCAMEnable == FALSE)
-                pAdapter->StaCfg.WindowsPowerMode = Ndis802_11PowerModeMAX_PSP;
-            pAdapter->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeMAX_PSP;
-            OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_RECEIVE_DTIM);
-            pAdapter->StaCfg.DefaultListenCount = 5;
-
-        }
-        else if ((strcmp(arg, "Fast_PSP") == 0) ||
-				 (strcmp(arg, "fast_psp") == 0) ||
-                 (strcmp(arg, "FAST_PSP") == 0))
-        {
-            // do NOT turn on PSM bit here, wait until MlmeCheckForPsmChange()
-            // to exclude certain situations.
-            OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_RECEIVE_DTIM);
-            if (pAdapter->StaCfg.bWindowsACCAMEnable == FALSE)
-                pAdapter->StaCfg.WindowsPowerMode = Ndis802_11PowerModeFast_PSP;
-            pAdapter->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeFast_PSP;
-            pAdapter->StaCfg.DefaultListenCount = 3;
-        }
-        else if ((strcmp(arg, "Legacy_PSP") == 0) ||
-                 (strcmp(arg, "legacy_psp") == 0) ||
-                 (strcmp(arg, "LEGACY_PSP") == 0))
-        {
-            // do NOT turn on PSM bit here, wait until MlmeCheckForPsmChange()
-            // to exclude certain situations.
-            OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_RECEIVE_DTIM);
-            if (pAdapter->StaCfg.bWindowsACCAMEnable == FALSE)
-                pAdapter->StaCfg.WindowsPowerMode = Ndis802_11PowerModeLegacy_PSP;
-            pAdapter->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeLegacy_PSP;
-            pAdapter->StaCfg.DefaultListenCount = 3;
-        }
-        else
-        {
-            //Default Ndis802_11PowerModeCAM
-            // clear PSM bit immediately
-            MlmeSetPsmBit(pAdapter, PWR_ACTIVE);
-            OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_RECEIVE_DTIM);
-            if (pAdapter->StaCfg.bWindowsACCAMEnable == FALSE)
-                pAdapter->StaCfg.WindowsPowerMode = Ndis802_11PowerModeCAM;
-            pAdapter->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeCAM;
-        }
-
-        DBGPRINT(RT_DEBUG_TRACE, ("Set_PSMode_Proc::(PSMode=%ld)\n", pAdapter->StaCfg.WindowsPowerMode));
-    }
-    else
-        return FALSE;
-
-
-    return TRUE;
-}
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-/*
-    ==========================================================================
-    Description:
-        Set WpaSupport flag.
-    Value:
-        0: Driver ignore wpa_supplicant.
-        1: wpa_supplicant initiates scanning and AP selection.
-        2: driver takes care of scanning, AP selection, and IEEE 802.11 association parameters.
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_Wpa_Support(
-    IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-
-    if ( simple_strtol(arg, 0, 10) == 0)
-        pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_DISABLE;
-    else if ( simple_strtol(arg, 0, 10) == 1)
-        pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_ENABLE;
-    else if ( simple_strtol(arg, 0, 10) == 2)
-        pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_ENABLE_WITH_WEB_UI;
-    else
-        pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_DISABLE;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_Wpa_Support::(WpaSupplicantUP=%d)\n", pAd->StaCfg.WpaSupplicantUP));
-
-    return TRUE;
-}
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef DBG
-/*
-    ==========================================================================
-    Description:
-        Read / Write MAC
-    Arguments:
-        pAdapter                    Pointer to our adapter
-        wrq                         Pointer to the ioctl argument
-
-    Return Value:
-        None
-
-    Note:
-        Usage:
-               1.) iwpriv ra0 mac 0        ==> read MAC where Addr=0x0
-               2.) iwpriv ra0 mac 0=12     ==> write MAC where Addr=0x0, value=12
-    ==========================================================================
-*/
-VOID RTMPIoctlMAC(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq)
-{
-	CHAR				*this_char;
-	CHAR				*value;
-	INT					j = 0, k = 0;
-	CHAR				msg[1024];
-	CHAR				arg[255];
-	ULONG				macAddr = 0;
-	UCHAR				temp[16], temp2[16];
-	UINT32				macValue = 0;
-	INT					Status;
-
-
-	memset(msg, 0x00, 1024);
-	if (wrq->u.data.length > 1) //No parameters.
-	{
-	    Status = copy_from_user(arg, wrq->u.data.pointer, (wrq->u.data.length > 255) ? 255 : wrq->u.data.length);
-		sprintf(msg, "\n");
-
-		//Parsing Read or Write
-	    this_char = arg;
-		if (!*this_char)
-			goto next;
-
-		if ((value = rtstrchr(this_char, '=')) != NULL)
-			*value++ = 0;
-
-		if (!value || !*value)
-		{ //Read
-			// Sanity check
-			if(strlen(this_char) > 4)
-				goto next;
-
-			j = strlen(this_char);
-			while(j-- > 0)
-			{
-				if(this_char[j] > 'f' || this_char[j] < '0')
-					return;
-			}
-
-			// Mac Addr
-			k = j = strlen(this_char);
-			while(j-- > 0)
-			{
-				this_char[4-k+j] = this_char[j];
-			}
-
-			while(k < 4)
-				this_char[3-k++]='0';
-			this_char[4]='\0';
-
-			if(strlen(this_char) == 4)
-			{
-				AtoH(this_char, temp, 2);
-				macAddr = *temp*256 + temp[1];
-				if (macAddr < 0xFFFF)
-				{
-					RTMP_IO_READ32(pAdapter, macAddr, &macValue);
-					DBGPRINT(RT_DEBUG_TRACE, ("MacAddr=%lx, MacValue=%x\n", macAddr, macValue));
-					sprintf(msg+strlen(msg), "[0x%08lX]:%08X  ", macAddr , macValue);
-				}
-				else
-				{//Invalid parametes, so default printk all bbp
-					goto next;
-				}
-			}
-		}
-		else
-		{ //Write
-			memcpy(&temp2, value, strlen(value));
-			temp2[strlen(value)] = '\0';
-
-			// Sanity check
-			if((strlen(this_char) > 4) || strlen(temp2) > 8)
-				goto next;
-
-			j = strlen(this_char);
-			while(j-- > 0)
-			{
-				if(this_char[j] > 'f' || this_char[j] < '0')
-					return;
-			}
-
-			j = strlen(temp2);
-			while(j-- > 0)
-			{
-				if(temp2[j] > 'f' || temp2[j] < '0')
-					return;
-			}
-
-			//MAC Addr
-			k = j = strlen(this_char);
-			while(j-- > 0)
-			{
-				this_char[4-k+j] = this_char[j];
-			}
-
-			while(k < 4)
-				this_char[3-k++]='0';
-			this_char[4]='\0';
-
-			//MAC value
-			k = j = strlen(temp2);
-			while(j-- > 0)
-			{
-				temp2[8-k+j] = temp2[j];
-			}
-
-			while(k < 8)
-				temp2[7-k++]='0';
-			temp2[8]='\0';
-
-			{
-				AtoH(this_char, temp, 2);
-				macAddr = *temp*256 + temp[1];
-
-				AtoH(temp2, temp, 4);
-				macValue = *temp*256*256*256 + temp[1]*256*256 + temp[2]*256 + temp[3];
-
-				// debug mode
-				if (macAddr == (HW_DEBUG_SETTING_BASE + 4))
-				{
-					// 0x2bf4: byte0 non-zero: enable R17 tuning, 0: disable R17 tuning
-                    if (macValue & 0x000000ff)
-                    {
-                        pAdapter->BbpTuning.bEnable = TRUE;
-                        DBGPRINT(RT_DEBUG_TRACE,("turn on R17 tuning\n"));
-                    }
-                    else
-                    {
-                        UCHAR R66;
-                        pAdapter->BbpTuning.bEnable = FALSE;
-                        R66 = 0x26 + GET_LNA_GAIN(pAdapter);
-#ifdef RALINK_ATE
-						if (ATE_ON(pAdapter))
-						{
-							ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R66, (0x26 + GET_LNA_GAIN(pAdapter)));
-						}
-						else
-#endif // RALINK_ATE //
-						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R66, (0x26 + GET_LNA_GAIN(pAdapter)));
-                        DBGPRINT(RT_DEBUG_TRACE,("turn off R17 tuning, restore to 0x%02x\n", R66));
-                    }
-					return;
-				}
-
-				DBGPRINT(RT_DEBUG_TRACE, ("MacAddr=%02lx, MacValue=0x%x\n", macAddr, macValue));
-
-				RTMP_IO_WRITE32(pAdapter, macAddr, macValue);
-				sprintf(msg+strlen(msg), "[0x%08lX]:%08X  ", macAddr, macValue);
-			}
-		}
-	}
-next:
-	if(strlen(msg) == 1)
-		sprintf(msg+strlen(msg), "===>Error command format!");
-
-	// Copy the information into the user buffer
-	wrq->u.data.length = strlen(msg);
-	Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlMAC\n\n"));
-}
-
-/*
-    ==========================================================================
-    Description:
-        Read / Write E2PROM
-    Arguments:
-        pAdapter                    Pointer to our adapter
-        wrq                         Pointer to the ioctl argument
-
-    Return Value:
-        None
-
-    Note:
-        Usage:
-               1.) iwpriv ra0 e2p 0     	==> read E2PROM where Addr=0x0
-               2.) iwpriv ra0 e2p 0=1234    ==> write E2PROM where Addr=0x0, value=1234
-    ==========================================================================
-*/
-VOID RTMPIoctlE2PROM(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq)
-{
-	CHAR				*this_char;
-	CHAR				*value;
-	INT					j = 0, k = 0;
-	CHAR				msg[1024];
-	CHAR				arg[255];
-	USHORT				eepAddr = 0;
-	UCHAR				temp[16], temp2[16];
-	USHORT				eepValue;
-	int					Status;
-
-
-	memset(msg, 0x00, 1024);
-	if (wrq->u.data.length > 1) //No parameters.
-	{
-	    Status = copy_from_user(arg, wrq->u.data.pointer, (wrq->u.data.length > 255) ? 255 : wrq->u.data.length);
-		sprintf(msg, "\n");
-
-	    //Parsing Read or Write
-		this_char = arg;
-
-
-		if (!*this_char)
-			goto next;
-
-		if ((value = rtstrchr(this_char, '=')) != NULL)
-			*value++ = 0;
-
-		if (!value || !*value)
-		{ //Read
-
-			// Sanity check
-			if(strlen(this_char) > 4)
-				goto next;
-
-			j = strlen(this_char);
-			while(j-- > 0)
-			{
-				if(this_char[j] > 'f' || this_char[j] < '0')
-					return;
-			}
-
-			// E2PROM addr
-			k = j = strlen(this_char);
-			while(j-- > 0)
-			{
-				this_char[4-k+j] = this_char[j];
-			}
-
-			while(k < 4)
-				this_char[3-k++]='0';
-			this_char[4]='\0';
-
-			if(strlen(this_char) == 4)
-			{
-				AtoH(this_char, temp, 2);
-				eepAddr = *temp*256 + temp[1];
-				if (eepAddr < 0xFFFF)
-				{
-					RT28xx_EEPROM_READ16(pAdapter, eepAddr, eepValue);
-					sprintf(msg+strlen(msg), "[0x%04X]:0x%04X  ", eepAddr , eepValue);
-				}
-				else
-				{//Invalid parametes, so default printk all bbp
-					goto next;
-				}
-			}
-		}
-		else
-		{ //Write
-			memcpy(&temp2, value, strlen(value));
-			temp2[strlen(value)] = '\0';
-
-			// Sanity check
-			if((strlen(this_char) > 4) || strlen(temp2) > 8)
-				goto next;
-
-			j = strlen(this_char);
-			while(j-- > 0)
-			{
-				if(this_char[j] > 'f' || this_char[j] < '0')
-					return;
-			}
-			j = strlen(temp2);
-			while(j-- > 0)
-			{
-				if(temp2[j] > 'f' || temp2[j] < '0')
-					return;
-			}
-
-			//MAC Addr
-			k = j = strlen(this_char);
-			while(j-- > 0)
-			{
-				this_char[4-k+j] = this_char[j];
-			}
-
-			while(k < 4)
-				this_char[3-k++]='0';
-			this_char[4]='\0';
-
-			//MAC value
-			k = j = strlen(temp2);
-			while(j-- > 0)
-			{
-				temp2[4-k+j] = temp2[j];
-			}
-
-			while(k < 4)
-				temp2[3-k++]='0';
-			temp2[4]='\0';
-
-			AtoH(this_char, temp, 2);
-			eepAddr = *temp*256 + temp[1];
-
-			AtoH(temp2, temp, 2);
-			eepValue = *temp*256 + temp[1];
-
-			RT28xx_EEPROM_WRITE16(pAdapter, eepAddr, eepValue);
-			sprintf(msg+strlen(msg), "[0x%02X]:%02X  ", eepAddr, eepValue);
-		}
-	}
-next:
-	if(strlen(msg) == 1)
-		sprintf(msg+strlen(msg), "===>Error command format!");
-
-
-	// Copy the information into the user buffer
-	wrq->u.data.length = strlen(msg);
-	Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlE2PROM\n"));
-}
-#endif // DBG //
-
-
-
-
-INT Set_TGnWifiTest_Proc(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          arg)
-{
-    if (simple_strtol(arg, 0, 10) == 0)
-        pAd->StaCfg.bTGnWifiTest = FALSE;
-    else
-        pAd->StaCfg.bTGnWifiTest = TRUE;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("IF Set_TGnWifiTest_Proc::(bTGnWifiTest=%d)\n", pAd->StaCfg.bTGnWifiTest));
-	return TRUE;
-}
-
-INT Set_LongRetryLimit_Proc(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	PUCHAR			arg)
-{
-	TX_RTY_CFG_STRUC	tx_rty_cfg;
-	UCHAR				LongRetryLimit = (UCHAR)simple_strtol(arg, 0, 10);
-
-	RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
-	tx_rty_cfg.field.LongRtyLimit = LongRetryLimit;
-	RTMP_IO_WRITE32(pAdapter, TX_RTY_CFG, tx_rty_cfg.word);
-	DBGPRINT(RT_DEBUG_TRACE, ("IF Set_LongRetryLimit_Proc::(tx_rty_cfg=0x%x)\n", tx_rty_cfg.word));
-	return TRUE;
-}
-
-INT Set_ShortRetryLimit_Proc(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	PUCHAR			arg)
-{
-	TX_RTY_CFG_STRUC	tx_rty_cfg;
-	UCHAR				ShortRetryLimit = (UCHAR)simple_strtol(arg, 0, 10);
-
-	RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
-	tx_rty_cfg.field.ShortRtyLimit = ShortRetryLimit;
-	RTMP_IO_WRITE32(pAdapter, TX_RTY_CFG, tx_rty_cfg.word);
-	DBGPRINT(RT_DEBUG_TRACE, ("IF Set_ShortRetryLimit_Proc::(tx_rty_cfg=0x%x)\n", tx_rty_cfg.word));
-	return TRUE;
-}
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-INT Set_Ieee80211dClientMode_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    if (simple_strtol(arg, 0, 10) == 0)
-        pAdapter->StaCfg.IEEE80211dClientMode = Rt802_11_D_None;
-    else if (simple_strtol(arg, 0, 10) == 1)
-        pAdapter->StaCfg.IEEE80211dClientMode = Rt802_11_D_Flexible;
-    else if (simple_strtol(arg, 0, 10) == 2)
-        pAdapter->StaCfg.IEEE80211dClientMode = Rt802_11_D_Strict;
-    else
-        return FALSE;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_Ieee802dMode_Proc::(IEEEE0211dMode=%d)\n", pAdapter->StaCfg.IEEE80211dClientMode));
-    return TRUE;
-}
-#endif // EXT_BUILD_CHANNEL_LIST //
-
-#ifdef CARRIER_DETECTION_SUPPORT
-INT Set_CarrierDetect_Proc(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          arg)
-{
-    if (simple_strtol(arg, 0, 10) == 0)
-        pAd->CommonCfg.CarrierDetect.Enable = FALSE;
-    else
-        pAd->CommonCfg.CarrierDetect.Enable = TRUE;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("IF Set_CarrierDetect_Proc::(CarrierDetect.Enable=%d)\n", pAd->CommonCfg.CarrierDetect.Enable));
-	return TRUE;
-}
-#endif // CARRIER_DETECTION_SUPPORT //
-
-
-INT	Show_Adhoc_MacTable_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PCHAR			extra)
-{
-	INT i;
-
-	sprintf(extra, "\n");
-
-#ifdef DOT11_N_SUPPORT
-	sprintf(extra, "%sHT Operating Mode : %d\n", extra, pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode);
-#endif // DOT11_N_SUPPORT //
-
-	sprintf(extra, "%s\n%-19s%-4s%-4s%-7s%-7s%-7s%-10s%-6s%-6s%-6s%-6s\n", extra,
-			"MAC", "AID", "BSS", "RSSI0", "RSSI1", "RSSI2", "PhMd", "BW", "MCS", "SGI", "STBC");
-
-	for (i=1; i<MAX_LEN_OF_MAC_TABLE; i++)
-	{
-		PMAC_TABLE_ENTRY pEntry = &pAd->MacTab.Content[i];
-
-		if (strlen(extra) > (IW_PRIV_SIZE_MASK - 30))
-		    break;
-		if ((pEntry->ValidAsCLI || pEntry->ValidAsApCli) && (pEntry->Sst == SST_ASSOC))
-		{
-			sprintf(extra, "%s%02X:%02X:%02X:%02X:%02X:%02X  ", extra,
-				pEntry->Addr[0], pEntry->Addr[1], pEntry->Addr[2],
-				pEntry->Addr[3], pEntry->Addr[4], pEntry->Addr[5]);
-			sprintf(extra, "%s%-4d", extra, (int)pEntry->Aid);
-			sprintf(extra, "%s%-4d", extra, (int)pEntry->apidx);
-			sprintf(extra, "%s%-7d", extra, pEntry->RssiSample.AvgRssi0);
-			sprintf(extra, "%s%-7d", extra, pEntry->RssiSample.AvgRssi1);
-			sprintf(extra, "%s%-7d", extra, pEntry->RssiSample.AvgRssi2);
-			sprintf(extra, "%s%-10s", extra, GetPhyMode(pEntry->HTPhyMode.field.MODE));
-			sprintf(extra, "%s%-6s", extra, GetBW(pEntry->HTPhyMode.field.BW));
-			sprintf(extra, "%s%-6d", extra, pEntry->HTPhyMode.field.MCS);
-			sprintf(extra, "%s%-6d", extra, pEntry->HTPhyMode.field.ShortGI);
-			sprintf(extra, "%s%-6d", extra, pEntry->HTPhyMode.field.STBC);
-			sprintf(extra, "%s%-10d, %d, %d%%\n", extra, pEntry->DebugFIFOCount, pEntry->DebugTxCount,
-						(pEntry->DebugTxCount) ? ((pEntry->DebugTxCount-pEntry->DebugFIFOCount)*100/pEntry->DebugTxCount) : 0);
-			sprintf(extra, "%s\n", extra);
-		}
-	}
-
-	return TRUE;
-}
-
-
diff --git a/drivers/staging/rt2870/wpa.h b/drivers/staging/rt2870/wpa.h
index 0134ae6097c..71250722414 100644
--- a/drivers/staging/rt2870/wpa.h
+++ b/drivers/staging/rt2870/wpa.h
@@ -1,357 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	wpa.h
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Name		Date			Modification logs
-*/
-
-#ifndef	__WPA_H__
-#define	__WPA_H__
-
-// EAPOL Key descripter frame format related length
-#define LEN_KEY_DESC_NONCE			32
-#define LEN_KEY_DESC_IV				16
-#define LEN_KEY_DESC_RSC			8
-#define LEN_KEY_DESC_ID				8
-#define LEN_KEY_DESC_REPLAY			8
-#define LEN_KEY_DESC_MIC			16
-
-// The length is the EAPoL-Key frame except key data field.
-// Please refer to 802.11i-2004 ,Figure 43u in p.78
-#define LEN_EAPOL_KEY_MSG			(sizeof(KEY_DESCRIPTER) - MAX_LEN_OF_RSNIE)
-
-// EAP Code Type.
-#define EAP_CODE_REQUEST	1
-#define EAP_CODE_RESPONSE	2
-#define EAP_CODE_SUCCESS    3
-#define EAP_CODE_FAILURE    4
-
-// EAPOL frame Protocol Version
-#define	EAPOL_VER					1
-#define	EAPOL_VER2					2
-
-// EAPOL-KEY Descriptor Type
-#define	WPA1_KEY_DESC				0xfe
-#define WPA2_KEY_DESC               0x02
-
-// Key Descriptor Version of Key Information
-#define	DESC_TYPE_TKIP				1
-#define	DESC_TYPE_AES				2
-#define DESC_TYPE_MESH				3
-
-#define LEN_MSG1_2WAY               0x7f
-#define MAX_LEN_OF_EAP_HS           256
-
-#define LEN_MASTER_KEY				32
-
-// EAPOL EK, MK
-#define LEN_EAP_EK					16
-#define LEN_EAP_MICK				16
-#define LEN_EAP_KEY					((LEN_EAP_EK)+(LEN_EAP_MICK))
-// TKIP key related
-#define LEN_PMKID					16
-#define LEN_TKIP_EK					16
-#define LEN_TKIP_RXMICK				8
-#define LEN_TKIP_TXMICK				8
-#define LEN_AES_EK					16
-#define LEN_AES_KEY					LEN_AES_EK
-#define LEN_TKIP_KEY				((LEN_TKIP_EK)+(LEN_TKIP_RXMICK)+(LEN_TKIP_TXMICK))
-#define TKIP_AP_TXMICK_OFFSET		((LEN_EAP_KEY)+(LEN_TKIP_EK))
-#define TKIP_AP_RXMICK_OFFSET		(TKIP_AP_TXMICK_OFFSET+LEN_TKIP_TXMICK)
-#define TKIP_GTK_LENGTH				((LEN_TKIP_EK)+(LEN_TKIP_RXMICK)+(LEN_TKIP_TXMICK))
-#define LEN_PTK						((LEN_EAP_KEY)+(LEN_TKIP_KEY))
-#define MIN_LEN_OF_GTK				5
-
-// RSN IE Length definition
-#define MAX_LEN_OF_RSNIE         	90
-#define MIN_LEN_OF_RSNIE         	8
-
-//EAP Packet Type
-#define	EAPPacket		0
-#define	EAPOLStart		1
-#define	EAPOLLogoff		2
-#define	EAPOLKey		3
-#define	EAPOLASFAlert	4
-#define	EAPTtypeMax		5
-
-#define	EAPOL_MSG_INVALID	0
-#define	EAPOL_PAIR_MSG_1	1
-#define	EAPOL_PAIR_MSG_2	2
-#define	EAPOL_PAIR_MSG_3	3
-#define	EAPOL_PAIR_MSG_4	4
-#define	EAPOL_GROUP_MSG_1	5
-#define	EAPOL_GROUP_MSG_2	6
-
-#define PAIRWISEKEY					1
-#define GROUPKEY					0
-
-// Retry timer counter initial value
-#define PEER_MSG1_RETRY_TIMER_CTR           0
-#define PEER_MSG3_RETRY_TIMER_CTR           10
-#define GROUP_MSG1_RETRY_TIMER_CTR          20
-
-
-#define EAPOL_START_DISABLE					0
-#define EAPOL_START_PSK						1
-#define EAPOL_START_1X						2
-
-#define MIX_CIPHER_WPA_TKIP_ON(x)       (((x) & 0x08) != 0)
-#define MIX_CIPHER_WPA_AES_ON(x)        (((x) & 0x04) != 0)
-#define MIX_CIPHER_WPA2_TKIP_ON(x)      (((x) & 0x02) != 0)
-#define MIX_CIPHER_WPA2_AES_ON(x)       (((x) & 0x01) != 0)
-
-#define ROUND_UP(__x, __y) \
-	(((ULONG)((__x)+((__y)-1))) & ((ULONG)~((__y)-1)))
-
-#define	ADD_ONE_To_64BIT_VAR(_V)		\
-{										\
-	UCHAR	cnt = LEN_KEY_DESC_REPLAY;	\
-	do									\
-	{									\
-		cnt--;							\
-		_V[cnt]++;						\
-		if (cnt == 0)					\
-			break;						\
-	}while (_V[cnt] == 0);				\
-}
-
-#define IS_WPA_CAPABILITY(a)       (((a) >= Ndis802_11AuthModeWPA) && ((a) <= Ndis802_11AuthModeWPA1PSKWPA2PSK))
-
-// EAPOL Key Information definition within Key descriptor format
-typedef	struct PACKED _KEY_INFO
-{
-#ifdef RT_BIG_ENDIAN
-	UCHAR	KeyAck:1;
-    UCHAR	Install:1;
-    UCHAR	KeyIndex:2;
-    UCHAR	KeyType:1;
-    UCHAR	KeyDescVer:3;
-    UCHAR	Rsvd:3;
-    UCHAR	EKD_DL:1;		// EKD for AP; DL for STA
-    UCHAR	Request:1;
-    UCHAR	Error:1;
-    UCHAR	Secure:1;
-    UCHAR	KeyMic:1;
-#else
-	UCHAR	KeyMic:1;
-	UCHAR	Secure:1;
-	UCHAR	Error:1;
-	UCHAR	Request:1;
-	UCHAR	EKD_DL:1;       // EKD for AP; DL for STA
-	UCHAR	Rsvd:3;
-	UCHAR	KeyDescVer:3;
-	UCHAR	KeyType:1;
-	UCHAR	KeyIndex:2;
-	UCHAR	Install:1;
-	UCHAR	KeyAck:1;
-#endif
-}	KEY_INFO, *PKEY_INFO;
-
-// EAPOL Key descriptor format
-typedef	struct PACKED _KEY_DESCRIPTER
-{
-	UCHAR		Type;
-	KEY_INFO	KeyInfo;
-	UCHAR		KeyLength[2];
-	UCHAR		ReplayCounter[LEN_KEY_DESC_REPLAY];
-	UCHAR		KeyNonce[LEN_KEY_DESC_NONCE];
-	UCHAR		KeyIv[LEN_KEY_DESC_IV];
-	UCHAR		KeyRsc[LEN_KEY_DESC_RSC];
-	UCHAR		KeyId[LEN_KEY_DESC_ID];
-	UCHAR		KeyMic[LEN_KEY_DESC_MIC];
-	UCHAR		KeyDataLen[2];
-	UCHAR		KeyData[MAX_LEN_OF_RSNIE];
-}	KEY_DESCRIPTER, *PKEY_DESCRIPTER;
-
-typedef	struct PACKED _EAPOL_PACKET
-{
-	UCHAR	 			ProVer;
-	UCHAR	 			ProType;
-	UCHAR	 			Body_Len[2];
-	KEY_DESCRIPTER		KeyDesc;
-}	EAPOL_PACKET, *PEAPOL_PACKET;
-
-//802.11i D10 page 83
-typedef struct PACKED _GTK_ENCAP
-{
-#ifndef RT_BIG_ENDIAN
-    UCHAR               Kid:2;
-    UCHAR               tx:1;
-    UCHAR               rsv:5;
-    UCHAR               rsv1;
-#else
-    UCHAR               rsv:5;
-    UCHAR               tx:1;
-    UCHAR               Kid:2;
-    UCHAR               rsv1;
-#endif
-    UCHAR               GTK[TKIP_GTK_LENGTH];
-}   GTK_ENCAP, *PGTK_ENCAP;
-
-typedef struct PACKED _KDE_ENCAP
-{
-    UCHAR               Type;
-    UCHAR               Len;
-    UCHAR               OUI[3];
-    UCHAR               DataType;
-    GTK_ENCAP      GTKEncap;
-}   KDE_ENCAP, *PKDE_ENCAP;
-
-// For WPA1
-typedef struct PACKED _RSNIE {
-    UCHAR   oui[4];
-    USHORT  version;
-    UCHAR   mcast[4];
-    USHORT  ucount;
-    struct PACKED {
-        UCHAR oui[4];
-    }ucast[1];
-} RSNIE, *PRSNIE;
-
-// For WPA2
-typedef struct PACKED _RSNIE2 {
-    USHORT  version;
-    UCHAR   mcast[4];
-    USHORT  ucount;
-    struct PACKED {
-        UCHAR oui[4];
-    }ucast[1];
-} RSNIE2, *PRSNIE2;
-
-// AKM Suite
-typedef struct PACKED _RSNIE_AUTH {
-    USHORT acount;
-    struct PACKED {
-        UCHAR oui[4];
-    }auth[1];
-} RSNIE_AUTH,*PRSNIE_AUTH;
-
-typedef	union PACKED _RSN_CAPABILITIES	{
-	struct	PACKED {
-#ifdef RT_BIG_ENDIAN
-        USHORT		Rsvd:10;
-        USHORT		GTKSA_R_Counter:2;
-        USHORT		PTKSA_R_Counter:2;
-        USHORT		No_Pairwise:1;
-		USHORT		PreAuth:1;
-#else
-        USHORT		PreAuth:1;
-		USHORT		No_Pairwise:1;
-		USHORT		PTKSA_R_Counter:2;
-		USHORT		GTKSA_R_Counter:2;
-		USHORT		Rsvd:10;
-#endif
-	}	field;
-	USHORT			word;
-}	RSN_CAPABILITIES, *PRSN_CAPABILITIES;
-
-typedef struct PACKED _EAP_HDR {
-    UCHAR   ProVer;
-    UCHAR   ProType;
-    UCHAR   Body_Len[2];
-    UCHAR   code;
-    UCHAR   identifier;
-    UCHAR   length[2]; // including code and identifier, followed by length-2 octets of data
-} EAP_HDR, *PEAP_HDR;
-
-// For supplicant state machine states. 802.11i Draft 4.1, p. 97
-// We simplified it
-typedef	enum	_WpaState
-{
-	SS_NOTUSE,				// 0
-	SS_START,				// 1
-	SS_WAIT_MSG_3,			// 2
-	SS_WAIT_GROUP,			// 3
-	SS_FINISH,  			// 4
-	SS_KEYUPDATE,			// 5
-}	WPA_STATE;
-
-//
-//	The definition of the cipher combination
-//
-// 	 bit3	bit2  bit1   bit0
-//	+------------+------------+
-// 	|	  WPA	 |	   WPA2   |
-//	+------+-----+------+-----+
-//	| TKIP | AES | TKIP | AES |
-//	|	0  |  1  |   1  |  0  | -> 0x06
-//	|	0  |  1  |   1  |  1  | -> 0x07
-//	|	1  |  0  |   0  |  1  | -> 0x09
-//	|	1  |  0  |   1  |  1  | -> 0x0B
-//	|	1  |  1  |   0  |  1  | -> 0x0D
-//	|	1  |  1  |   1  |  0  | -> 0x0E
-//	|	1  |  1  |   1  |  1  |	-> 0x0F
-//	+------+-----+------+-----+
-//
-typedef	enum	_WpaMixPairCipher
-{
-	MIX_CIPHER_NOTUSE 			= 0x00,
-	WPA_NONE_WPA2_TKIPAES		= 0x03,		// WPA2-TKIPAES
-	WPA_AES_WPA2_TKIP 			= 0x06,
-	WPA_AES_WPA2_TKIPAES		= 0x07,
-	WPA_TKIP_WPA2_AES			= 0x09,
-	WPA_TKIP_WPA2_TKIPAES		= 0x0B,
-	WPA_TKIPAES_WPA2_NONE		= 0x0C,		// WPA-TKIPAES
-	WPA_TKIPAES_WPA2_AES		= 0x0D,
-	WPA_TKIPAES_WPA2_TKIP		= 0x0E,
-	WPA_TKIPAES_WPA2_TKIPAES	= 0x0F,
-}	WPA_MIX_PAIR_CIPHER;
-
-typedef struct PACKED _RSN_IE_HEADER_STRUCT	{
-	UCHAR		Eid;
-	UCHAR		Length;
-	USHORT		Version;	// Little endian format
-}	RSN_IE_HEADER_STRUCT, *PRSN_IE_HEADER_STRUCT;
-
-// Cipher suite selector types
-typedef struct PACKED _CIPHER_SUITE_STRUCT	{
-	UCHAR		Oui[3];
-	UCHAR		Type;
-}	CIPHER_SUITE_STRUCT, *PCIPHER_SUITE_STRUCT;
-
-// Authentication and Key Management suite selector
-typedef struct PACKED _AKM_SUITE_STRUCT	{
-	UCHAR		Oui[3];
-	UCHAR		Type;
-}	AKM_SUITE_STRUCT, *PAKM_SUITE_STRUCT;
-
-// RSN capability
-typedef struct	PACKED _RSN_CAPABILITY	{
-	USHORT		Rsv:10;
-	USHORT		GTKSAReplayCnt:2;
-	USHORT		PTKSAReplayCnt:2;
-	USHORT		NoPairwise:1;
-	USHORT		PreAuth:1;
-}	RSN_CAPABILITY, *PRSN_CAPABILITY;
-
-#endif
+#include "../rt2860/wpa.h"
diff --git a/drivers/staging/rt3070/2870_main_dev.c b/drivers/staging/rt3070/2870_main_dev.c
index 401ddb01213..32427c0bb3b 100644
--- a/drivers/staging/rt3070/2870_main_dev.c
+++ b/drivers/staging/rt3070/2870_main_dev.c
@@ -1,1627 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-    rtmp_main.c
-
-    Abstract:
-    main initialization routines
-
-    Revision History:
-    Who         When            What
-    --------    ----------      ----------------------------------------------
-    Name        Date            Modification logs
-    Jan Lee		01-10-2005	    modified
-	Sample		Jun/01/07		Merge RT2870 and RT2860 drivers.
-*/
-
-#include "rt_config.h"
-
-
-// Following information will be show when you run 'modinfo'
-// *** If you have a solution for the bug in current version of driver, please mail to me.
-// Otherwise post to forum in ralinktech's web site(www.ralinktech.com) and let all users help you. ***
-MODULE_AUTHOR("Paul Lin <paul_lin@ralinktech.com>");
-MODULE_DESCRIPTION("RT2870 Wireless Lan Linux Driver");
-#ifdef CONFIG_STA_SUPPORT
-MODULE_LICENSE("GPL");
-#ifdef MODULE_VERSION
-MODULE_VERSION(STA_DRIVER_VERSION);
-#endif
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef MULTIPLE_CARD_SUPPORT
-// record whether the card in the card list is used in the card file
-extern UINT8  MC_CardUsed[];
-#endif // MULTIPLE_CARD_SUPPORT //
-
-/* Kernel thread and vars, which handles packets that are completed. Only
- * packets that have a "complete" function are sent here. This way, the
- * completion is run out of kernel context, and doesn't block the rest of
- * the stack. */
-//static int mlme_kill = 0;		// Mlme kernel thread
-//static int RTUSBCmd_kill = 0;	// Command kernel thread
-//static int TimerFunc_kill = 0;	// TimerQ kernel thread
-
-//static wait_queue_head_t 	timerWaitQ;
-//static wait_queue_t 		waitQ;
-
-extern INT __devinit rt28xx_probe(IN void *_dev_p, IN void *_dev_id_p,
-									IN UINT argc, OUT PRTMP_ADAPTER *ppAd);
-
-
-/* module table */
-struct usb_device_id    rtusb_usb_id[] = RT2870_USB_DEVICES;
-INT const               rtusb_usb_id_len = sizeof(rtusb_usb_id) / sizeof(struct usb_device_id);
-MODULE_DEVICE_TABLE(usb, rtusb_usb_id);
-
-#ifndef PF_NOFREEZE
-#define PF_NOFREEZE  0
-#endif
-
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-
-/**************************************************************************/
-/**************************************************************************/
-//tested for kernel 2.4 series
-/**************************************************************************/
-/**************************************************************************/
-static void *rtusb_probe(struct usb_device *dev, UINT interface,
-						const struct usb_device_id *id_table);
-static void rtusb_disconnect(struct usb_device *dev, void *ptr);
-
-struct usb_driver rtusb_driver = {
-		name:"rt2870",
-		probe:rtusb_probe,
-		disconnect:rtusb_disconnect,
-		id_table:rtusb_usb_id,
-	};
-
-#else
-
-#ifdef CONFIG_PM
-static int rt2870_suspend(struct usb_interface *intf, pm_message_t state);
-static int rt2870_resume(struct usb_interface *intf);
-#endif // CONFIG_PM //
-
-/**************************************************************************/
-/**************************************************************************/
-//tested for kernel 2.6series
-/**************************************************************************/
-/**************************************************************************/
-static int rtusb_probe (struct usb_interface *intf,
-						const struct usb_device_id *id);
-static void rtusb_disconnect(struct usb_interface *intf);
-
-struct usb_driver rtusb_driver = {
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,15)
-	.owner = THIS_MODULE,
-#endif
-	.name="rt2870",
-	.probe=rtusb_probe,
-	.disconnect=rtusb_disconnect,
-	.id_table=rtusb_usb_id,
-
-#ifdef CONFIG_PM
-	suspend:	rt2870_suspend,
-	resume:		rt2870_resume,
-#endif
-	};
-
-#ifdef CONFIG_PM
-
-VOID RT2860RejectPendingPackets(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	// clear PS packets
-	// clear TxSw packets
-}
-
-static int rt2870_suspend(
-	struct usb_interface *intf,
-	pm_message_t state)
-{
-	struct net_device *net_dev;
-	PRTMP_ADAPTER pAd = usb_get_intfdata(intf);
-
-
-	DBGPRINT(RT_DEBUG_TRACE, ("===> rt2870_suspend()\n"));
-	net_dev = pAd->net_dev;
-			netif_device_detach(net_dev);
-
-	pAd->PM_FlgSuspend = 1;
-	if (netif_running(net_dev)) {
-		RTUSBCancelPendingBulkInIRP(pAd);
-		RTUSBCancelPendingBulkOutIRP(pAd);
-	}
-	DBGPRINT(RT_DEBUG_TRACE, ("<=== rt2870_suspend()\n"));
-	return 0;
-}
-
-static int rt2870_resume(
-	struct usb_interface *intf)
-{
-	struct net_device *net_dev;
-	PRTMP_ADAPTER pAd = usb_get_intfdata(intf);
-
-
-	DBGPRINT(RT_DEBUG_TRACE, ("===> rt2870_resume()\n"));
-
-	pAd->PM_FlgSuspend = 0;
-	net_dev = pAd->net_dev;
-			netif_device_attach(net_dev);
-			netif_start_queue(net_dev);
-			netif_carrier_on(net_dev);
-			netif_wake_queue(net_dev);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<=== rt2870_resume()\n"));
-	return 0;
-}
-#endif // CONFIG_PM //
-#endif // LINUX_VERSION_CODE //
-
-
-// Init driver module
-INT __init rtusb_init(void)
-{
-	printk("rtusb init --->\n");
-	return usb_register(&rtusb_driver);
-}
-
-// Deinit driver module
-VOID __exit rtusb_exit(void)
-{
-	usb_deregister(&rtusb_driver);
-	printk("<--- rtusb exit\n");
-}
-
-module_init(rtusb_init);
-module_exit(rtusb_exit);
-
-
-
-
-/*---------------------------------------------------------------------	*/
-/* function declarations												*/
-/*---------------------------------------------------------------------	*/
-
-/*
-========================================================================
-Routine Description:
-    MLME kernel thread.
-
-Arguments:
-	*Context			the pAd, driver control block pointer
-
-Return Value:
-    0					close the thread
-
-Note:
-========================================================================
-*/
-INT MlmeThread(
-	IN void *Context)
-{
-	PRTMP_ADAPTER	pAd = (PRTMP_ADAPTER)Context;
-	POS_COOKIE	pObj;
-	int status;
-
-	pObj = (POS_COOKIE)pAd->OS_Cookie;
-
-	rtmp_os_thread_init("rt2870MlmeThread", (PVOID)&(pAd->mlmeComplete));
-
-	while (pAd->mlme_kill == 0)
-	{
-		/* lock the device pointers */
-		//down(&(pAd->mlme_semaphore));
-		status = down_interruptible(&(pAd->mlme_semaphore));
-
-		/* lock the device pointers , need to check if required*/
-		//down(&(pAd->usbdev_semaphore));
-
-		if (!pAd->PM_FlgSuspend)
-		MlmeHandler(pAd);
-
-		/* unlock the device pointers */
-		//up(&(pAd->usbdev_semaphore));
-		if (status != 0)
-		{
-			RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
-			break;
-		}
-	}
-
-	/* notify the exit routine that we're actually exiting now
-	 *
-	 * complete()/wait_for_completion() is similar to up()/down(),
-	 * except that complete() is safe in the case where the structure
-	 * is getting deleted in a parallel mode of execution (i.e. just
-	 * after the down() -- that's necessary for the thread-shutdown
-	 * case.
-	 *
-	 * complete_and_exit() goes even further than this -- it is safe in
-	 * the case that the thread of the caller is going away (not just
-	 * the structure) -- this is necessary for the module-remove case.
-	 * This is important in preemption kernels, which transfer the flow
-	 * of execution immediately upon a complete().
-	 */
-	DBGPRINT(RT_DEBUG_TRACE,( "<---%s\n",__FUNCTION__));
-
-	pObj->MLMEThr_pid = NULL;
-
-	complete_and_exit (&pAd->mlmeComplete, 0);
-	return 0;
-
-}
-
-
-/*
-========================================================================
-Routine Description:
-    USB command kernel thread.
-
-Arguments:
-	*Context			the pAd, driver control block pointer
-
-Return Value:
-    0					close the thread
-
-Note:
-========================================================================
-*/
-INT RTUSBCmdThread(
-	IN void * Context)
-{
-	PRTMP_ADAPTER	pAd = (PRTMP_ADAPTER)Context;
-	POS_COOKIE		pObj;
-	int status;
-
-	pObj = (POS_COOKIE)pAd->OS_Cookie;
-
-	rtmp_os_thread_init("rt2870CmdThread", (PVOID)&(pAd->CmdQComplete));
-
-	NdisAcquireSpinLock(&pAd->CmdQLock);
-	pAd->CmdQ.CmdQState = RT2870_THREAD_RUNNING;
-	NdisReleaseSpinLock(&pAd->CmdQLock);
-
-	while (pAd->CmdQ.CmdQState == RT2870_THREAD_RUNNING)
-	{
-		/* lock the device pointers */
-		//down(&(pAd->RTUSBCmd_semaphore));
-		status = down_interruptible(&(pAd->RTUSBCmd_semaphore));
-
-		if (pAd->CmdQ.CmdQState == RT2870_THREAD_STOPED)
-			break;
-
-		if (status != 0)
-		{
-			RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
-			break;
-		}
-		/* lock the device pointers , need to check if required*/
-		//down(&(pAd->usbdev_semaphore));
-
-		if (!pAd->PM_FlgSuspend)
-		CMDHandler(pAd);
-
-		/* unlock the device pointers */
-		//up(&(pAd->usbdev_semaphore));
-	}
-
-	if (!pAd->PM_FlgSuspend)
-	{	// Clear the CmdQElements.
-		CmdQElmt	*pCmdQElmt = NULL;
-
-		NdisAcquireSpinLock(&pAd->CmdQLock);
-		pAd->CmdQ.CmdQState = RT2870_THREAD_STOPED;
-		while(pAd->CmdQ.size)
-		{
-			RTUSBDequeueCmd(&pAd->CmdQ, &pCmdQElmt);
-			if (pCmdQElmt)
-			{
-				if (pCmdQElmt->CmdFromNdis == TRUE)
-				{
-					if (pCmdQElmt->buffer != NULL)
-						NdisFreeMemory(pCmdQElmt->buffer, pCmdQElmt->bufferlength, 0);
-
-					NdisFreeMemory(pCmdQElmt, sizeof(CmdQElmt), 0);
-				}
-				else
-				{
-					if ((pCmdQElmt->buffer != NULL) && (pCmdQElmt->bufferlength != 0))
-						NdisFreeMemory(pCmdQElmt->buffer, pCmdQElmt->bufferlength, 0);
-		            {
-						NdisFreeMemory(pCmdQElmt, sizeof(CmdQElmt), 0);
-					}
-				}
-			}
-		}
-
-		NdisReleaseSpinLock(&pAd->CmdQLock);
-	}
-	/* notify the exit routine that we're actually exiting now
-	 *
-	 * complete()/wait_for_completion() is similar to up()/down(),
-	 * except that complete() is safe in the case where the structure
-	 * is getting deleted in a parallel mode of execution (i.e. just
-	 * after the down() -- that's necessary for the thread-shutdown
-	 * case.
-	 *
-	 * complete_and_exit() goes even further than this -- it is safe in
-	 * the case that the thread of the caller is going away (not just
-	 * the structure) -- this is necessary for the module-remove case.
-	 * This is important in preemption kernels, which transfer the flow
-	 * of execution immediately upon a complete().
-	 */
-	DBGPRINT(RT_DEBUG_TRACE,( "<---RTUSBCmdThread\n"));
-
-	pObj->RTUSBCmdThr_pid = NULL;
-
-	complete_and_exit (&pAd->CmdQComplete, 0);
-	return 0;
-
-}
-
-
-static void RT2870_TimerQ_Handle(RTMP_ADAPTER *pAd)
-{
-	int status;
-	RALINK_TIMER_STRUCT	*pTimer;
-	RT2870_TIMER_ENTRY	*pEntry;
-	unsigned long	irqFlag;
-
-	while(!pAd->TimerFunc_kill)
-	{
-//		printk("waiting for event!\n");
-		pTimer = NULL;
-
-		status = down_interruptible(&(pAd->RTUSBTimer_semaphore));
-
-		if (pAd->TimerQ.status == RT2870_THREAD_STOPED)
-			break;
-
-		// event happened.
-		while(pAd->TimerQ.pQHead)
-		{
-			RTMP_IRQ_LOCK(&pAd->TimerQLock, irqFlag);
-			pEntry = pAd->TimerQ.pQHead;
-			if (pEntry)
-			{
-				pTimer = pEntry->pRaTimer;
-
-				// update pQHead
-				pAd->TimerQ.pQHead = pEntry->pNext;
-				if (pEntry == pAd->TimerQ.pQTail)
-					pAd->TimerQ.pQTail = NULL;
-
-				// return this queue entry to timerQFreeList.
-				pEntry->pNext = pAd->TimerQ.pQPollFreeList;
-				pAd->TimerQ.pQPollFreeList = pEntry;
-			}
-			RTMP_IRQ_UNLOCK(&pAd->TimerQLock, irqFlag);
-
-			if (pTimer)
-			{
-				if (pTimer->handle != NULL)
-				if (!pAd->PM_FlgSuspend)
-					pTimer->handle(NULL, (PVOID) pTimer->cookie, NULL, pTimer);
-				if ((pTimer->Repeat) && (pTimer->State == FALSE))
-					RTMP_OS_Add_Timer(&pTimer->TimerObj, pTimer->TimerValue);
-			}
-		}
-
-		if (status != 0)
-		{
-			pAd->TimerQ.status = RT2870_THREAD_STOPED;
-			RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
-			break;
-		}
-	}
-}
-
-
-INT TimerQThread(
-	IN OUT PVOID Context)
-{
-	PRTMP_ADAPTER	pAd;
-	POS_COOKIE	pObj;
-
-	pAd = (PRTMP_ADAPTER)Context;
-	pObj = (POS_COOKIE) pAd->OS_Cookie;
-
-	rtmp_os_thread_init("rt2870TimerQHandle", (PVOID)&(pAd->TimerQComplete));
-
-	RT2870_TimerQ_Handle(pAd);
-
-	/* notify the exit routine that we're actually exiting now
-	 *
-	 * complete()/wait_for_completion() is similar to up()/down(),
-	 * except that complete() is safe in the case where the structure
-	 * is getting deleted in a parallel mode of execution (i.e. just
-	 * after the down() -- that's necessary for the thread-shutdown
-	 * case.
-	 *
-	 * complete_and_exit() goes even further than this -- it is safe in
-	 * the case that the thread of the caller is going away (not just
-	 * the structure) -- this is necessary for the module-remove case.
-	 * This is important in preemption kernels, which transfer the flow
-	 * of execution immediately upon a complete().
-	 */
-	DBGPRINT(RT_DEBUG_TRACE,( "<---%s\n",__FUNCTION__));
-
-	pObj->TimerQThr_pid = NULL;
-
-	complete_and_exit(&pAd->TimerQComplete, 0);
-	return 0;
-
-}
-
-
-RT2870_TIMER_ENTRY *RT2870_TimerQ_Insert(
-	IN RTMP_ADAPTER *pAd,
-	IN RALINK_TIMER_STRUCT *pTimer)
-{
-	RT2870_TIMER_ENTRY *pQNode = NULL, *pQTail;
-	unsigned long irqFlags;
-
-
-	RTMP_IRQ_LOCK(&pAd->TimerQLock, irqFlags);
-	if (pAd->TimerQ.status & RT2870_THREAD_CAN_DO_INSERT)
-	{
-		if(pAd->TimerQ.pQPollFreeList)
-		{
-			pQNode = pAd->TimerQ.pQPollFreeList;
-			pAd->TimerQ.pQPollFreeList = pQNode->pNext;
-
-			pQNode->pRaTimer = pTimer;
-			pQNode->pNext = NULL;
-
-			pQTail = pAd->TimerQ.pQTail;
-			if (pAd->TimerQ.pQTail != NULL)
-				pQTail->pNext = pQNode;
-			pAd->TimerQ.pQTail = pQNode;
-			if (pAd->TimerQ.pQHead == NULL)
-				pAd->TimerQ.pQHead = pQNode;
-		}
-		RTMP_IRQ_UNLOCK(&pAd->TimerQLock, irqFlags);
-
-		if (pQNode)
-			up(&pAd->RTUSBTimer_semaphore);
-			//wake_up(&timerWaitQ);
-	}
-	else
-	{
-		RTMP_IRQ_UNLOCK(&pAd->TimerQLock, irqFlags);
-	}
-	return pQNode;
-}
-
-
-BOOLEAN RT2870_TimerQ_Remove(
-	IN RTMP_ADAPTER *pAd,
-	IN RALINK_TIMER_STRUCT *pTimer)
-{
-	RT2870_TIMER_ENTRY *pNode, *pPrev = NULL;
-	unsigned long irqFlags;
-
-	RTMP_IRQ_LOCK(&pAd->TimerQLock, irqFlags);
-	if (pAd->TimerQ.status >= RT2870_THREAD_INITED)
-	{
-		pNode = pAd->TimerQ.pQHead;
-		while (pNode)
-		{
-			if (pNode->pRaTimer == pTimer)
-				break;
-			pPrev = pNode;
-			pNode = pNode->pNext;
-		}
-
-		// Now move it to freeList queue.
-		if (pNode)
-		{
-			if (pNode == pAd->TimerQ.pQHead)
-				pAd->TimerQ.pQHead = pNode->pNext;
-			if (pNode == pAd->TimerQ.pQTail)
-				pAd->TimerQ.pQTail = pPrev;
-			if (pPrev != NULL)
-				pPrev->pNext = pNode->pNext;
-
-			// return this queue entry to timerQFreeList.
-			pNode->pNext = pAd->TimerQ.pQPollFreeList;
-			pAd->TimerQ.pQPollFreeList = pNode;
-		}
-	}
-	RTMP_IRQ_UNLOCK(&pAd->TimerQLock, irqFlags);
-
-	return TRUE;
-}
-
-
-void RT2870_TimerQ_Exit(RTMP_ADAPTER *pAd)
-{
-	RT2870_TIMER_ENTRY *pTimerQ;
-	unsigned long irqFlags;
-
-	RTMP_IRQ_LOCK(&pAd->TimerQLock, irqFlags);
-	while (pAd->TimerQ.pQHead)
-	{
-		pTimerQ = pAd->TimerQ.pQHead;
-		pAd->TimerQ.pQHead = pTimerQ->pNext;
-		// remove the timeQ
-	}
-	pAd->TimerQ.pQPollFreeList = NULL;
-	os_free_mem(pAd, pAd->TimerQ.pTimerQPoll);
-	pAd->TimerQ.pQTail = NULL;
-	pAd->TimerQ.pQHead = NULL;
-	pAd->TimerQ.status = RT2870_THREAD_STOPED;
-	RTMP_IRQ_UNLOCK(&pAd->TimerQLock, irqFlags);
-
-}
-
-
-void RT2870_TimerQ_Init(RTMP_ADAPTER *pAd)
-{
-	int 	i;
-	RT2870_TIMER_ENTRY *pQNode, *pEntry;
-	unsigned long irqFlags;
-
-	NdisAllocateSpinLock(&pAd->TimerQLock);
-
-	RTMP_IRQ_LOCK(&pAd->TimerQLock, irqFlags);
-	NdisZeroMemory(&pAd->TimerQ, sizeof(pAd->TimerQ));
-	//InterlockedExchange(&pAd->TimerQ.count, 0);
-
-	/* Initialise the wait q head */
-	//init_waitqueue_head(&timerWaitQ);
-
-	os_alloc_mem(pAd, &pAd->TimerQ.pTimerQPoll, sizeof(RT2870_TIMER_ENTRY) * TIMER_QUEUE_SIZE_MAX);
-	if (pAd->TimerQ.pTimerQPoll)
-	{
-		pEntry = NULL;
-		pQNode = (RT2870_TIMER_ENTRY *)pAd->TimerQ.pTimerQPoll;
-		for (i = 0 ;i <TIMER_QUEUE_SIZE_MAX; i++)
-		{
-			pQNode->pNext = pEntry;
-			pEntry = pQNode;
-			pQNode++;
-		}
-		pAd->TimerQ.pQPollFreeList = pEntry;
-		pAd->TimerQ.pQHead = NULL;
-		pAd->TimerQ.pQTail = NULL;
-		pAd->TimerQ.status = RT2870_THREAD_INITED;
-	}
-	RTMP_IRQ_UNLOCK(&pAd->TimerQLock, irqFlags);
-}
-
-
-VOID RT2870_WatchDog(IN RTMP_ADAPTER *pAd)
-{
-	PHT_TX_CONTEXT		pHTTXContext;
-	int 					idx;
-	ULONG				irqFlags;
-	PURB		   		pUrb;
-	BOOLEAN				needDumpSeq = FALSE;
-	UINT32          	MACValue;
-
-
-	idx = 0;
-	RTMP_IO_READ32(pAd, TXRXQ_PCNT, &MACValue);
-	if ((MACValue & 0xff) !=0 )
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("TX QUEUE 0 Not EMPTY(Value=0x%0x). !!!!!!!!!!!!!!!\n", MACValue));
-		RTMP_IO_WRITE32(pAd, PBF_CFG, 0xf40012);
-		while((MACValue &0xff) != 0 && (idx++ < 10))
-		{
-		        RTMP_IO_READ32(pAd, TXRXQ_PCNT, &MACValue);
-		        NdisMSleep(1);
-		}
-		RTMP_IO_WRITE32(pAd, PBF_CFG, 0xf40006);
-	}
-
-//PS packets use HCCA queue when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA)
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		idx = 0;
-		if ((MACValue & 0xff00) !=0 )
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("TX QUEUE 1 Not EMPTY(Value=0x%0x). !!!!!!!!!!!!!!!\n", MACValue));
-			RTMP_IO_WRITE32(pAd, PBF_CFG, 0xf4000a);
-			while((MACValue &0xff00) != 0 && (idx++ < 10))
-			{
-				RTMP_IO_READ32(pAd, TXRXQ_PCNT, &MACValue);
-				NdisMSleep(1);
-			}
-			RTMP_IO_WRITE32(pAd, PBF_CFG, 0xf40006);
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	if (pAd->watchDogRxOverFlowCnt >= 2)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("Maybe the Rx Bulk-In hanged! Cancel the pending Rx bulks request!\n"));
-		if ((!RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS |
-									fRTMP_ADAPTER_BULKIN_RESET |
-									fRTMP_ADAPTER_HALT_IN_PROGRESS |
-									fRTMP_ADAPTER_NIC_NOT_EXIST))))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("Call CMDTHREAD_RESET_BULK_IN to cancel the pending Rx Bulk!\n"));
-			RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BULKIN_RESET);
-			RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_IN, NULL, 0);
-			needDumpSeq = TRUE;
-		}
-		pAd->watchDogRxOverFlowCnt = 0;
-	}
-
-
-	for (idx = 0; idx < NUM_OF_TX_RING; idx++)
-	{
-		pUrb = NULL;
-
-		RTMP_IRQ_LOCK(&pAd->BulkOutLock[idx], irqFlags);
-		if ((pAd->BulkOutPending[idx] == TRUE) && pAd->watchDogTxPendingCnt)
-		{
-			pAd->watchDogTxPendingCnt[idx]++;
-
-			if ((pAd->watchDogTxPendingCnt[idx] > 2) &&
-				 (!RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS | fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST | fRTMP_ADAPTER_BULKOUT_RESET)))
-				)
-			{
-				// FIXME: Following code just support single bulk out. If you wanna support multiple bulk out. Modify it!
-				pHTTXContext = (PHT_TX_CONTEXT)(&pAd->TxContext[idx]);
-				if (pHTTXContext->IRPPending)
-				{	// Check TxContext.
-					pUrb = pHTTXContext->pUrb;
-				}
-				else if (idx == MGMTPIPEIDX)
-				{
-					PTX_CONTEXT pMLMEContext, pNULLContext, pPsPollContext;
-
-					//Check MgmtContext.
-					pMLMEContext = (PTX_CONTEXT)(pAd->MgmtRing.Cell[pAd->MgmtRing.TxDmaIdx].AllocVa);
-					pPsPollContext = (PTX_CONTEXT)(&pAd->PsPollContext);
-					pNULLContext = (PTX_CONTEXT)(&pAd->NullContext);
-
-					if (pMLMEContext->IRPPending)
-					{
-						ASSERT(pMLMEContext->IRPPending);
-						pUrb = pMLMEContext->pUrb;
-					}
-					else if (pNULLContext->IRPPending)
-					{
-						ASSERT(pNULLContext->IRPPending);
-						pUrb = pNULLContext->pUrb;
-					}
-					else if (pPsPollContext->IRPPending)
-					{
-						ASSERT(pPsPollContext->IRPPending);
-						pUrb = pPsPollContext->pUrb;
-					}
-				}
-
-				RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[idx], irqFlags);
-
-				DBGPRINT(RT_DEBUG_TRACE, ("Maybe the Tx Bulk-Out hanged! Cancel the pending Tx bulks request of idx(%d)!\n", idx));
-				if (pUrb)
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("Unlink the pending URB!\n"));
-					// unlink it now
-					RTUSB_UNLINK_URB(pUrb);
-					// Sleep 200 microseconds to give cancellation time to work
-					RTMPusecDelay(200);
-					needDumpSeq = TRUE;
-				}
-				else
-				{
-					DBGPRINT(RT_DEBUG_ERROR, ("Unkonw bulkOut URB maybe hanged!!!!!!!!!!!!\n"));
-				}
-			}
-			else
-			{
-				RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[idx], irqFlags);
-			}
-		}
-		else
-		{
-			RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[idx], irqFlags);
-		}
-	}
-
-#ifdef DOT11_N_SUPPORT
-	// For Sigma debug, dump the ba_reordering sequence.
-	if((needDumpSeq == TRUE) && (pAd->CommonCfg.bDisableReordering == 0))
-	{
-		USHORT				Idx;
-		PBA_REC_ENTRY		pBAEntry = NULL;
-		UCHAR				count = 0;
-		struct reordering_mpdu *mpdu_blk;
-
-		Idx = pAd->MacTab.Content[BSSID_WCID].BARecWcidArray[0];
-
-		pBAEntry = &pAd->BATable.BARecEntry[Idx];
-		if((pBAEntry->list.qlen > 0) && (pBAEntry->list.next != NULL))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("NICUpdateRawCounters():The Queueing pkt in reordering buffer:\n"));
-			NdisAcquireSpinLock(&pBAEntry->RxReRingLock);
-			mpdu_blk = pBAEntry->list.next;
-			while (mpdu_blk)
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("\t%d:Seq-%d, bAMSDU-%d!\n", count, mpdu_blk->Sequence, mpdu_blk->bAMSDU));
-				mpdu_blk = mpdu_blk->next;
-				count++;
-			}
-
-			DBGPRINT(RT_DEBUG_TRACE, ("\npBAEntry->LastIndSeq=%d!\n", pBAEntry->LastIndSeq));
-			NdisReleaseSpinLock(&pBAEntry->RxReRingLock);
-		}
-	}
-#endif // DOT11_N_SUPPORT //
-}
-
-/*
-========================================================================
-Routine Description:
-    Release allocated resources.
-
-Arguments:
-    *dev				Point to the PCI or USB device
-	pAd					driver control block pointer
-
-Return Value:
-    None
-
-Note:
-========================================================================
-*/
-static void _rtusb_disconnect(struct usb_device *dev, PRTMP_ADAPTER pAd)
-{
-	struct net_device	*net_dev = NULL;
-
-
-	DBGPRINT(RT_DEBUG_ERROR, ("rtusb_disconnect: unregister usbnet usb-%s-%s\n",
-				dev->bus->bus_name, dev->devpath));
-	if (!pAd)
-	{
-#ifdef MULTIPLE_CARD_SUPPORT
-		if ((pAd->MC_RowID >= 0) && (pAd->MC_RowID <= MAX_NUM_OF_MULTIPLE_CARD))
-			MC_CardUsed[pAd->MC_RowID] = 0; // not clear MAC address
-#endif // MULTIPLE_CARD_SUPPORT //
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)	/* kernel 2.4 series */
-		while(MOD_IN_USE > 0)
-		{
-			MOD_DEC_USE_COUNT;
-		}
-#else
-		usb_put_dev(dev);
-#endif // LINUX_VERSION_CODE //
-
-		printk("rtusb_disconnect: pAd == NULL!\n");
-		return;
-	}
-	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST);
-
-
-
-	// for debug, wait to show some messages to /proc system
-	udelay(1);
-
-
-
-
-	net_dev = pAd->net_dev;
-	if (pAd->net_dev != NULL)
-	{
-		printk("rtusb_disconnect: unregister_netdev(), dev->name=%s!\n", net_dev->name);
-		unregister_netdev (pAd->net_dev);
-	}
-	udelay(1);
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)	/* kernel 2.4 series */
-#else
-	flush_scheduled_work();
-#endif // LINUX_VERSION_CODE //
-	udelay(1);
-
-	// free net_device memory
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)	/* kernel 2.4 series */
-	kfree(net_dev);
-#else
-	free_netdev(net_dev);
-#endif // LINUX_VERSION_CODE //
-
-	// free adapter memory
-	RTMPFreeAdapter(pAd);
-
-	// release a use of the usb device structure
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)	/* kernel 2.4 series */
-	while(MOD_IN_USE > 0)
-	{
-		MOD_DEC_USE_COUNT;
-	}
-#else
-	usb_put_dev(dev);
-#endif // LINUX_VERSION_CODE //
-	udelay(1);
-
-	DBGPRINT(RT_DEBUG_ERROR, (" RTUSB disconnect successfully\n"));
-}
-
-
-/*
-========================================================================
-Routine Description:
-    Probe RT28XX chipset.
-
-Arguments:
-    *dev				Point to the PCI or USB device
-	interface
-	*id_table			Point to the PCI or USB device ID
-
-Return Value:
-    None
-
-Note:
-========================================================================
-*/
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)	/* kernel 2.4 series */
-static void *rtusb_probe(struct usb_device *dev, UINT interface,
-						const struct usb_device_id *id)
-{
-	PRTMP_ADAPTER pAd;
-	rt28xx_probe((void *)dev, (void *)id, interface, &pAd);
-	return (void *)pAd;
-}
-
-//Disconnect function is called within exit routine
-static void rtusb_disconnect(struct usb_device *dev, void *ptr)
-{
-	_rtusb_disconnect(dev, ((PRTMP_ADAPTER)ptr));
-}
-
-#else	/* kernel 2.6 series */
-static int rtusb_probe (struct usb_interface *intf,
-						const struct usb_device_id *id)
-{
-	PRTMP_ADAPTER pAd;
-	return (int)rt28xx_probe((void *)intf, (void *)id, 0, &pAd);
-}
-
-
-static void rtusb_disconnect(struct usb_interface *intf)
-{
-	struct usb_device   *dev = interface_to_usbdev(intf);
-	PRTMP_ADAPTER       pAd;
-
-
-	pAd = usb_get_intfdata(intf);
-	usb_set_intfdata(intf, NULL);
-
-	_rtusb_disconnect(dev, pAd);
-}
-#endif // LINUX_VERSION_CODE //
-
-
-/*
-========================================================================
-Routine Description:
-    Close kernel threads.
-
-Arguments:
-	*pAd				the raxx interface data pointer
-
-Return Value:
-    NONE
-
-Note:
-========================================================================
-*/
-VOID RT28xxThreadTerminate(
-	IN RTMP_ADAPTER *pAd)
-{
-	POS_COOKIE	pObj = (POS_COOKIE) pAd->OS_Cookie;
-	INT			ret;
-
-
-	// Sleep 50 milliseconds so pending io might finish normally
-	RTMPusecDelay(50000);
-
-	// We want to wait until all pending receives and sends to the
-	// device object. We cancel any
-	// irps. Wait until sends and receives have stopped.
-	RTUSBCancelPendingIRPs(pAd);
-
-	// Terminate Threads
-	if (pObj->MLMEThr_pid)
-	{
-		printk("Terminate the MLMEThr_pid=%d!\n", pid_nr(pObj->MLMEThr_pid));
-		mb();
-		pAd->mlme_kill = 1;
-		//RT28XX_MLME_HANDLER(pAd);
-		mb();
-		ret = kill_pid(pObj->MLMEThr_pid, SIGTERM, 1);
-		if (ret)
-		{
-			printk (KERN_WARNING "%s: unable to Mlme thread, pid=%d, ret=%d!\n",
-					pAd->net_dev->name, pid_nr(pObj->MLMEThr_pid), ret);
-		}
-		else
-		{
-			//wait_for_completion (&pAd->notify);
-			wait_for_completion (&pAd->mlmeComplete);
-			pObj->MLMEThr_pid = NULL;
-		}
-	}
-
-	if (pObj->RTUSBCmdThr_pid >= 0)
-	{
-		printk("Terminate the RTUSBCmdThr_pid=%d!\n", pid_nr(pObj->RTUSBCmdThr_pid));
-		mb();
-		NdisAcquireSpinLock(&pAd->CmdQLock);
-		pAd->CmdQ.CmdQState = RT2870_THREAD_STOPED;
-		NdisReleaseSpinLock(&pAd->CmdQLock);
-		mb();
-		//RTUSBCMDUp(pAd);
-		ret = kill_pid(pObj->RTUSBCmdThr_pid, SIGTERM, 1);
-		if (ret)
-		{
-			printk(KERN_WARNING "%s: unable to RTUSBCmd thread, pid=%d, ret=%d!\n",
-					pAd->net_dev->name, pid_nr(pObj->RTUSBCmdThr_pid), ret);
-		}
-		else
-		{
-			//wait_for_completion (&pAd->notify);
-			wait_for_completion (&pAd->CmdQComplete);
-			pObj->RTUSBCmdThr_pid = NULL;
-		}
-	}
-	if (pObj->TimerQThr_pid >= 0)
-	{
-		POS_COOKIE pObj = (POS_COOKIE)pAd->OS_Cookie;
-
-		printk("Terminate the TimerQThr_pid=%d!\n", pid_nr(pObj->TimerQThr_pid));
-		mb();
-		pAd->TimerFunc_kill = 1;
-		mb();
-		ret = kill_pid(pObj->TimerQThr_pid, SIGTERM, 1);
-		if (ret)
-		{
-			printk(KERN_WARNING "%s: unable to stop TimerQThread, pid=%d, ret=%d!\n",
-					pAd->net_dev->name, pid_nr(pObj->TimerQThr_pid), ret);
-		}
-		else
-		{
-			printk("wait_for_completion TimerQThr\n");
-			wait_for_completion(&pAd->TimerQComplete);
-			pObj->TimerQThr_pid = NULL;
-		}
-	}
-	// Kill tasklets
-	pAd->mlme_kill = 0;
-	pAd->CmdQ.CmdQState = RT2870_THREAD_UNKNOWN;
-	pAd->TimerFunc_kill = 0;
-}
-
-
-void kill_thread_task(IN PRTMP_ADAPTER pAd)
-{
-	POS_COOKIE pObj;
-
-	pObj = (POS_COOKIE) pAd->OS_Cookie;
-
-	tasklet_kill(&pObj->rx_done_task);
-	tasklet_kill(&pObj->mgmt_dma_done_task);
-	tasklet_kill(&pObj->ac0_dma_done_task);
-	tasklet_kill(&pObj->ac1_dma_done_task);
-	tasklet_kill(&pObj->ac2_dma_done_task);
-	tasklet_kill(&pObj->ac3_dma_done_task);
-	tasklet_kill(&pObj->hcca_dma_done_task);
-	tasklet_kill(&pObj->tbtt_task);
-
-}
-
-
-/*
-========================================================================
-Routine Description:
-    Check the chipset vendor/product ID.
-
-Arguments:
-    _dev_p				Point to the PCI or USB device
-
-Return Value:
-    TRUE				Check ok
-	FALSE				Check fail
-
-Note:
-========================================================================
-*/
-BOOLEAN RT28XXChipsetCheck(
-	IN void *_dev_p)
-{
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)	/* kernel 2.4 series */
-	struct usb_device *dev_p = (struct usb_device *)_dev_p;
-#else
-	struct usb_interface *intf = (struct usb_interface *)_dev_p;
-	struct usb_device *dev_p = interface_to_usbdev(intf);
-#endif // LINUX_VERSION_CODE //
-	UINT32 i;
-
-
-	for(i=0; i<rtusb_usb_id_len; i++)
-	{
-		if (dev_p->descriptor.idVendor == rtusb_usb_id[i].idVendor &&
-			dev_p->descriptor.idProduct == rtusb_usb_id[i].idProduct)
-		{
-			printk("rt2870: idVendor = 0x%x, idProduct = 0x%x\n",
-					dev_p->descriptor.idVendor, dev_p->descriptor.idProduct);
-			break;
-		}
-	}
-
-	if (i == rtusb_usb_id_len)
-	{
-		printk("rt2870: Error! Device Descriptor not matching!\n");
-		return FALSE;
-	}
-
-	return TRUE;
-}
-
-
-/*
-========================================================================
-Routine Description:
-    Init net device structure.
-
-Arguments:
-    _dev_p				Point to the PCI or USB device
-    *net_dev			Point to the net device
-	*pAd				the raxx interface data pointer
-
-Return Value:
-    TRUE				Init ok
-	FALSE				Init fail
-
-Note:
-========================================================================
-*/
-BOOLEAN RT28XXNetDevInit(
-	IN void 				*_dev_p,
-	IN struct  net_device	*net_dev,
-	IN RTMP_ADAPTER 		*pAd)
-{
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)	/* kernel 2.4 series */
-	struct usb_device *dev_p = (struct usb_device *)_dev_p;
-#else
-	struct usb_interface *intf = (struct usb_interface *)_dev_p;
-	struct usb_device *dev_p = interface_to_usbdev(intf);
-#endif // LINUX_VERSION_CODE //
-
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)	/* kernel 2.4 series */
-	pAd->config = dev_p->config;
-#else
-	pAd->config = &dev_p->config->desc;
-#endif // LINUX_VERSION_CODE //
-	return TRUE;
-}
-
-
-/*
-========================================================================
-Routine Description:
-    Init net device structure.
-
-Arguments:
-    _dev_p				Point to the PCI or USB device
-	*pAd				the raxx interface data pointer
-
-Return Value:
-    TRUE				Config ok
-	FALSE				Config fail
-
-Note:
-========================================================================
-*/
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-BOOLEAN RT28XXProbePostConfig(
-	IN void 				*_dev_p,
-	IN RTMP_ADAPTER 		*pAd,
-	IN INT32				interface)
-{
-	struct usb_device *dev_p = (struct usb_device *)_dev_p;
-	struct usb_interface *intf;
-	struct usb_interface_descriptor *iface_desc;
-	struct usb_endpoint_descriptor *endpoint;
-	ULONG BulkOutIdx;
-	UINT32 i;
-
-
-	/* get the active interface descriptor */
-	intf = &dev_p->actconfig->interface[interface];
-	iface_desc = &intf->altsetting[0];
-
-	/* get # of enpoints */
-	pAd->NumberOfPipes = iface_desc->bNumEndpoints;
-	DBGPRINT(RT_DEBUG_TRACE, ("NumEndpoints=%d\n", iface_desc->bNumEndpoints));
-
-	/* Configure Pipes */
-	endpoint = &iface_desc->endpoint[0];
-	BulkOutIdx = 0;
-
-	for(i=0; i<pAd->NumberOfPipes; i++)
-	{
-		if ((endpoint[i].bmAttributes == USB_ENDPOINT_XFER_BULK) &&
-			((endpoint[i].bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN))
-		{
-			pAd->BulkInEpAddr = endpoint[i].bEndpointAddress;
-			pAd->BulkInMaxPacketSize = endpoint[i].wMaxPacketSize;
-
-			DBGPRINT_RAW(RT_DEBUG_TRACE,
-				("BULK IN MaximumPacketSize = %d\n", pAd->BulkInMaxPacketSize));
-			DBGPRINT_RAW(RT_DEBUG_TRACE,
-				("EP address = 0x%2x  \n", endpoint[i].bEndpointAddress));
-		}
-		else if ((endpoint[i].bmAttributes == USB_ENDPOINT_XFER_BULK) &&
-				((endpoint[i].bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT))
-		{
-			// There are 6 bulk out EP. EP6 highest priority.
-			// EP1-4 is EDCA.  EP5 is HCCA.
-			pAd->BulkOutEpAddr[BulkOutIdx++] = endpoint[i].bEndpointAddress;
-			pAd->BulkOutMaxPacketSize = endpoint[i].wMaxPacketSize;
-
-			DBGPRINT_RAW(RT_DEBUG_TRACE,
-				("BULK OUT MaximumPacketSize = %d\n", pAd->BulkOutMaxPacketSize));
-			DBGPRINT_RAW(RT_DEBUG_TRACE,
-				("EP address = 0x%2x  \n", endpoint[i].bEndpointAddress));
-		}
-	}
-
-	if (!(pAd->BulkInEpAddr && pAd->BulkOutEpAddr[0]))
-	{
-		printk("Could not find both bulk-in and bulk-out endpoints\n");
-		return FALSE;
-	}
-
-	return TRUE;
-}
-
-#else
-BOOLEAN RT28XXProbePostConfig(
-	IN void 				*_dev_p,
-	IN RTMP_ADAPTER 		*pAd,
-	IN INT32				interface)
-{
-	struct usb_interface *intf = (struct usb_interface *)_dev_p;
-	struct usb_host_interface *iface_desc;
-	ULONG BulkOutIdx;
-	UINT32 i;
-
-
-	/* get the active interface descriptor */
-	iface_desc = intf->cur_altsetting;
-
-	/* get # of enpoints  */
-	pAd->NumberOfPipes = iface_desc->desc.bNumEndpoints;
-	DBGPRINT(RT_DEBUG_TRACE,
-			("NumEndpoints=%d\n", iface_desc->desc.bNumEndpoints));
-
-	/* Configure Pipes */
-	BulkOutIdx = 0;
-
-	for(i=0; i<pAd->NumberOfPipes; i++)
-	{
-		if ((iface_desc->endpoint[i].desc.bmAttributes ==
-				USB_ENDPOINT_XFER_BULK) &&
-			((iface_desc->endpoint[i].desc.bEndpointAddress &
-				USB_ENDPOINT_DIR_MASK) == USB_DIR_IN))
-		{
-			pAd->BulkInEpAddr = iface_desc->endpoint[i].desc.bEndpointAddress;
-			pAd->BulkInMaxPacketSize = iface_desc->endpoint[i].desc.wMaxPacketSize;
-
-			DBGPRINT_RAW(RT_DEBUG_TRACE,
-				("BULK IN MaximumPacketSize = %d\n", pAd->BulkInMaxPacketSize));
-			DBGPRINT_RAW(RT_DEBUG_TRACE,
-				("EP address = 0x%2x\n", iface_desc->endpoint[i].desc.bEndpointAddress));
-		}
-		else if ((iface_desc->endpoint[i].desc.bmAttributes ==
-					USB_ENDPOINT_XFER_BULK) &&
-				((iface_desc->endpoint[i].desc.bEndpointAddress &
-					USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT))
-		{
-			// there are 6 bulk out EP. EP6 highest priority.
-			// EP1-4 is EDCA.  EP5 is HCCA.
-			pAd->BulkOutEpAddr[BulkOutIdx++] = iface_desc->endpoint[i].desc.bEndpointAddress;
-			pAd->BulkOutMaxPacketSize = iface_desc->endpoint[i].desc.wMaxPacketSize;
-
-			DBGPRINT_RAW(RT_DEBUG_TRACE,
-				("BULK OUT MaximumPacketSize = %d\n", pAd->BulkOutMaxPacketSize));
-			DBGPRINT_RAW(RT_DEBUG_TRACE,
-				("EP address = 0x%2x  \n", iface_desc->endpoint[i].desc.bEndpointAddress));
-		}
-	}
-
-	if (!(pAd->BulkInEpAddr && pAd->BulkOutEpAddr[0]))
-	{
-		printk("%s: Could not find both bulk-in and bulk-out endpoints\n", __FUNCTION__);
-		return FALSE;
-	}
-
-	return TRUE;
-}
-#endif // LINUX_VERSION_CODE //
-
-
-/*
-========================================================================
-Routine Description:
-    Disable DMA.
-
-Arguments:
-	*pAd				the raxx interface data pointer
-
-Return Value:
-	None
-
-Note:
-========================================================================
-*/
-VOID RT28XXDMADisable(
-	IN RTMP_ADAPTER 		*pAd)
-{
-	// no use
-}
-
-
-
-/*
-========================================================================
-Routine Description:
-    Enable DMA.
-
-Arguments:
-	*pAd				the raxx interface data pointer
-
-Return Value:
-	None
-
-Note:
-========================================================================
-*/
-VOID RT28XXDMAEnable(
-	IN RTMP_ADAPTER 		*pAd)
-{
-	WPDMA_GLO_CFG_STRUC	GloCfg;
-	USB_DMA_CFG_STRUC	UsbCfg;
-	int					i = 0;
-
-
-	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x4);
-	do
-	{
-		RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &GloCfg.word);
-		if ((GloCfg.field.TxDMABusy == 0)  && (GloCfg.field.RxDMABusy == 0))
-			break;
-
-		DBGPRINT(RT_DEBUG_TRACE, ("==>  DMABusy\n"));
-		RTMPusecDelay(1000);
-		i++;
-	}while ( i <200);
-
-
-	RTMPusecDelay(50);
-	GloCfg.field.EnTXWriteBackDDONE = 1;
-	GloCfg.field.EnableRxDMA = 1;
-	GloCfg.field.EnableTxDMA = 1;
-	DBGPRINT(RT_DEBUG_TRACE, ("<== WRITE DMA offset 0x208 = 0x%x\n", GloCfg.word));
-	RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, GloCfg.word);
-
-	UsbCfg.word = 0;
-	UsbCfg.field.phyclear = 0;
-	/* usb version is 1.1,do not use bulk in aggregation */
-	if (pAd->BulkInMaxPacketSize == 512)
-			UsbCfg.field.RxBulkAggEn = 1;
-	/* for last packet, PBF might use more than limited, so minus 2 to prevent from error */
-	UsbCfg.field.RxBulkAggLmt = (MAX_RXBULK_SIZE /1024)-3;
-	UsbCfg.field.RxBulkAggTOut = 0x80; /* 2006-10-18 */
-	UsbCfg.field.RxBulkEn = 1;
-	UsbCfg.field.TxBulkEn = 1;
-
-	RTUSBWriteMACRegister(pAd, USB_DMA_CFG, UsbCfg.word);
-
-}
-
-/*
-========================================================================
-Routine Description:
-    Write Beacon buffer to Asic.
-
-Arguments:
-	*pAd				the raxx interface data pointer
-
-Return Value:
-	None
-
-Note:
-========================================================================
-*/
-VOID RT28xx_UpdateBeaconToAsic(
-	IN RTMP_ADAPTER		*pAd,
-	IN INT				apidx,
-	IN ULONG			FrameLen,
-	IN ULONG			UpdatePos)
-{
-	PUCHAR        	pBeaconFrame = NULL;
-	UCHAR  			*ptr;
-	UINT  			i, padding;
-	BEACON_SYNC_STRUCT	*pBeaconSync = pAd->CommonCfg.pBeaconSync;
-	UINT32			longValue;
-//	USHORT			shortValue;
-	BOOLEAN			bBcnReq = FALSE;
-	UCHAR			bcn_idx = 0;
-
-
-	if (pBeaconFrame == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("pBeaconFrame is NULL!\n"));
-		return;
-	}
-
-	if (pBeaconSync == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("pBeaconSync is NULL!\n"));
-		return;
-	}
-
-	//if ((pAd->WdsTab.Mode == WDS_BRIDGE_MODE) ||
-	//	((pAd->ApCfg.MBSSID[apidx].MSSIDDev == NULL) || !(pAd->ApCfg.MBSSID[apidx].MSSIDDev->flags & IFF_UP))
-	//	)
-	if (bBcnReq == FALSE)
-	{
-		/* when the ra interface is down, do not send its beacon frame */
-		/* clear all zero */
-		for(i=0; i<TXWI_SIZE; i+=4) {
-			RTMP_IO_WRITE32(pAd, pAd->BeaconOffset[bcn_idx] + i, 0x00);
-		}
-		pBeaconSync->BeaconBitMap &= (~(BEACON_BITMAP_MASK & (1 << bcn_idx)));
-		NdisZeroMemory(pBeaconSync->BeaconTxWI[bcn_idx], TXWI_SIZE);
-	}
-	else
-	{
-		ptr = (PUCHAR)&pAd->BeaconTxWI;
-#ifdef RT_BIG_ENDIAN
-		RTMPWIEndianChange(ptr, TYPE_TXWI);
-#endif
-		if (NdisEqualMemory(pBeaconSync->BeaconTxWI[bcn_idx], &pAd->BeaconTxWI, TXWI_SIZE) == FALSE)
-		{	// If BeaconTxWI changed, we need to rewrite the TxWI for the Beacon frames.
-			pBeaconSync->BeaconBitMap &= (~(BEACON_BITMAP_MASK & (1 << bcn_idx)));
-			NdisMoveMemory(pBeaconSync->BeaconTxWI[bcn_idx], &pAd->BeaconTxWI, TXWI_SIZE);
-		}
-
-		if ((pBeaconSync->BeaconBitMap & (1 << bcn_idx)) != (1 << bcn_idx))
-		{
-			for (i=0; i<TXWI_SIZE; i+=4)  // 16-byte TXWI field
-			{
-				longValue =  *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
-				RTMP_IO_WRITE32(pAd, pAd->BeaconOffset[bcn_idx] + i, longValue);
-				ptr += 4;
-			}
-		}
-
-		ptr = pBeaconSync->BeaconBuf[bcn_idx];
-		padding = (FrameLen & 0x01);
-		NdisZeroMemory((PUCHAR)(pBeaconFrame + FrameLen), padding);
-		FrameLen += padding;
-		for (i = 0 ; i < FrameLen /*HW_BEACON_OFFSET*/; i += 2)
-		{
-			if (NdisEqualMemory(ptr, pBeaconFrame, 2) == FALSE)
-			{
-				NdisMoveMemory(ptr, pBeaconFrame, 2);
-				//shortValue = *ptr + (*(ptr+1)<<8);
-				//RTMP_IO_WRITE8(pAd, pAd->BeaconOffset[bcn_idx] + TXWI_SIZE + i, shortValue);
-				RTUSBMultiWrite(pAd, pAd->BeaconOffset[bcn_idx] + TXWI_SIZE + i, ptr, 2);
-			}
-			ptr +=2;
-			pBeaconFrame += 2;
-		}
-
-		pBeaconSync->BeaconBitMap |= (1 << bcn_idx);
-
-		// For AP interface, set the DtimBitOn so that we can send Bcast/Mcast frame out after this beacon frame.
-	}
-
-}
-
-
-VOID RT2870_BssBeaconStop(
-	IN RTMP_ADAPTER *pAd)
-{
-	BEACON_SYNC_STRUCT	*pBeaconSync;
-	int i, offset;
-	BOOLEAN	Cancelled = TRUE;
-
-	pBeaconSync = pAd->CommonCfg.pBeaconSync;
-	if (pBeaconSync && pBeaconSync->EnableBeacon)
-	{
-		INT NumOfBcn;
-
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			NumOfBcn = MAX_MESH_NUM;
-		}
-#endif // CONFIG_STA_SUPPORT //
-
-		RTMPCancelTimer(&pAd->CommonCfg.BeaconUpdateTimer, &Cancelled);
-
-		for(i=0; i<NumOfBcn; i++)
-		{
-			NdisZeroMemory(pBeaconSync->BeaconBuf[i], HW_BEACON_OFFSET);
-			NdisZeroMemory(pBeaconSync->BeaconTxWI[i], TXWI_SIZE);
-
-			for (offset=0; offset<HW_BEACON_OFFSET; offset+=4)
-				RTMP_IO_WRITE32(pAd, pAd->BeaconOffset[i] + offset, 0x00);
-
-			pBeaconSync->CapabilityInfoLocationInBeacon[i] = 0;
-			pBeaconSync->TimIELocationInBeacon[i] = 0;
-		}
-		pBeaconSync->BeaconBitMap = 0;
-		pBeaconSync->DtimBitOn = 0;
-	}
-}
-
-
-VOID RT2870_BssBeaconStart(
-	IN RTMP_ADAPTER *pAd)
-{
-	int apidx;
-	BEACON_SYNC_STRUCT	*pBeaconSync;
-//	LARGE_INTEGER 	tsfTime, deltaTime;
-
-	pBeaconSync = pAd->CommonCfg.pBeaconSync;
-	if (pBeaconSync && pBeaconSync->EnableBeacon)
-	{
-		INT NumOfBcn;
-
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			NumOfBcn = MAX_MESH_NUM;
-		}
-#endif // CONFIG_STA_SUPPORT //
-
-		for(apidx=0; apidx<NumOfBcn; apidx++)
-		{
-			UCHAR CapabilityInfoLocationInBeacon = 0;
-			UCHAR TimIELocationInBeacon = 0;
-
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-
-			NdisZeroMemory(pBeaconSync->BeaconBuf[apidx], HW_BEACON_OFFSET);
-			pBeaconSync->CapabilityInfoLocationInBeacon[apidx] = CapabilityInfoLocationInBeacon;
-			pBeaconSync->TimIELocationInBeacon[apidx] = TimIELocationInBeacon;
-			NdisZeroMemory(pBeaconSync->BeaconTxWI[apidx], TXWI_SIZE);
-		}
-		pBeaconSync->BeaconBitMap = 0;
-		pBeaconSync->DtimBitOn = 0;
-		pAd->CommonCfg.BeaconUpdateTimer.Repeat = TRUE;
-
-		pAd->CommonCfg.BeaconAdjust = 0;
-		pAd->CommonCfg.BeaconFactor = 0xffffffff / (pAd->CommonCfg.BeaconPeriod << 10);
-		pAd->CommonCfg.BeaconRemain = (0xffffffff % (pAd->CommonCfg.BeaconPeriod << 10)) + 1;
-		printk("RT2870_BssBeaconStart:BeaconFactor=%d, BeaconRemain=%d!\n", pAd->CommonCfg.BeaconFactor, pAd->CommonCfg.BeaconRemain);
-		RTMPSetTimer(&pAd->CommonCfg.BeaconUpdateTimer, pAd->CommonCfg.BeaconPeriod);
-
-	}
-}
-
-
-VOID RT2870_BssBeaconInit(
-	IN RTMP_ADAPTER *pAd)
-{
-	BEACON_SYNC_STRUCT	*pBeaconSync;
-	int i;
-
-	NdisAllocMemory(pAd->CommonCfg.pBeaconSync, sizeof(BEACON_SYNC_STRUCT), MEM_ALLOC_FLAG);
-	if (pAd->CommonCfg.pBeaconSync)
-	{
-		pBeaconSync = pAd->CommonCfg.pBeaconSync;
-		NdisZeroMemory(pBeaconSync, sizeof(BEACON_SYNC_STRUCT));
-		for(i=0; i < HW_BEACON_MAX_COUNT; i++)
-		{
-			NdisZeroMemory(pBeaconSync->BeaconBuf[i], HW_BEACON_OFFSET);
-			pBeaconSync->CapabilityInfoLocationInBeacon[i] = 0;
-			pBeaconSync->TimIELocationInBeacon[i] = 0;
-			NdisZeroMemory(pBeaconSync->BeaconTxWI[i], TXWI_SIZE);
-		}
-		pBeaconSync->BeaconBitMap = 0;
-
-		//RTMPInitTimer(pAd, &pAd->CommonCfg.BeaconUpdateTimer, GET_TIMER_FUNCTION(BeaconUpdateExec), pAd, TRUE);
-		pBeaconSync->EnableBeacon = TRUE;
-	}
-}
-
-
-VOID RT2870_BssBeaconExit(
-	IN RTMP_ADAPTER *pAd)
-{
-	BEACON_SYNC_STRUCT	*pBeaconSync;
-	BOOLEAN	Cancelled = TRUE;
-	int i;
-
-	if (pAd->CommonCfg.pBeaconSync)
-	{
-		pBeaconSync = pAd->CommonCfg.pBeaconSync;
-		pBeaconSync->EnableBeacon = FALSE;
-		RTMPCancelTimer(&pAd->CommonCfg.BeaconUpdateTimer, &Cancelled);
-		pBeaconSync->BeaconBitMap = 0;
-
-		for(i=0; i<HW_BEACON_MAX_COUNT; i++)
-		{
-			NdisZeroMemory(pBeaconSync->BeaconBuf[i], HW_BEACON_OFFSET);
-			pBeaconSync->CapabilityInfoLocationInBeacon[i] = 0;
-			pBeaconSync->TimIELocationInBeacon[i] = 0;
-			NdisZeroMemory(pBeaconSync->BeaconTxWI[i], TXWI_SIZE);
-		}
-
-		NdisFreeMemory(pAd->CommonCfg.pBeaconSync, HW_BEACON_OFFSET * HW_BEACON_MAX_COUNT, 0);
-		pAd->CommonCfg.pBeaconSync = NULL;
-	}
-}
-
-VOID BeaconUpdateExec(
-    IN PVOID SystemSpecific1,
-    IN PVOID FunctionContext,
-    IN PVOID SystemSpecific2,
-    IN PVOID SystemSpecific3)
-{
-	PRTMP_ADAPTER	pAd = (PRTMP_ADAPTER)FunctionContext;
-	LARGE_INTEGER	tsfTime_a;//, tsfTime_b, deltaTime_exp, deltaTime_ab;
-	UINT32			delta, remain, remain_low, remain_high;
-//	BOOLEAN			positive;
-
-	ReSyncBeaconTime(pAd);
-
-
-
-	RTMP_IO_READ32(pAd, TSF_TIMER_DW0, &tsfTime_a.u.LowPart);
-	RTMP_IO_READ32(pAd, TSF_TIMER_DW1, &tsfTime_a.u.HighPart);
-
-
-	//positive=getDeltaTime(tsfTime_a, expectedTime, &deltaTime_exp);
-	remain_high = pAd->CommonCfg.BeaconRemain * tsfTime_a.u.HighPart;
-	remain_low = tsfTime_a.u.LowPart % (pAd->CommonCfg.BeaconPeriod << 10);
-	remain = (remain_high + remain_low)%(pAd->CommonCfg.BeaconPeriod << 10);
-	delta = (pAd->CommonCfg.BeaconPeriod << 10) - remain;
-
-	pAd->CommonCfg.BeaconUpdateTimer.TimerValue = (delta >> 10) + 10;
-
-}
-
+#include "../rt2870/2870_main_dev.c"
diff --git a/drivers/staging/rt3070/Makefile b/drivers/staging/rt3070/Makefile
index 55980c92925..df7ac19e088 100644
--- a/drivers/staging/rt3070/Makefile
+++ b/drivers/staging/rt3070/Makefile
@@ -3,11 +3,7 @@ obj-$(CONFIG_RT3070)	+= rt3070sta.o
 # TODO: all of these should be removed
 EXTRA_CFLAGS += -DLINUX -DAGGREGATION_SUPPORT -DPIGGYBACK_SUPPORT -DWMM_SUPPORT
 EXTRA_CFLAGS += -DRT2870 -DRT30xx -DRT3070
-EXTRA_CFLAGS += -DCONFIG_STA_SUPPORT
 EXTRA_CFLAGS += -DDBG
-EXTRA_CFLAGS += -DDOT11_N_SUPPORT
-EXTRA_CFLAGS += -DWPA_SUPPLICANT_SUPPORT
-EXTRA_CFLAGS += -DNATIVE_WPA_SUPPLICANT_SUPPORT
 
 rt3070sta-objs :=		\
 	common/md5.o		\
diff --git a/drivers/staging/rt3070/action.h b/drivers/staging/rt3070/action.h
index ce3877dce81..345fa8922ed 100644
--- a/drivers/staging/rt3070/action.h
+++ b/drivers/staging/rt3070/action.h
@@ -1,68 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	aironet.h
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Name		Date			Modification logs
-	Paul Lin	04-06-15		Initial
-*/
-
-#ifndef	__ACTION_H__
-#define	__ACTION_H__
-
-typedef struct PACKED __HT_INFO_OCTET
-{
-#ifdef RT_BIG_ENDIAN
-	UCHAR	Reserved:5;
-	UCHAR 	STA_Channel_Width:1;
-	UCHAR	Forty_MHz_Intolerant:1;
-	UCHAR	Request:1;
-#else
-	UCHAR	Request:1;
-	UCHAR	Forty_MHz_Intolerant:1;
-	UCHAR 	STA_Channel_Width:1;
-	UCHAR	Reserved:5;
-#endif
-} HT_INFORMATION_OCTET;
-
-
-typedef struct PACKED __FRAME_HT_INFO
-{
-	HEADER_802_11   		Hdr;
-	UCHAR					Category;
-	UCHAR					Action;
-	HT_INFORMATION_OCTET	HT_Info;
-}   FRAME_HT_INFO, *PFRAME_HT_INFO;
-
-#endif /* __ACTION_H__ */
-
-
+#include "../rt2870/common/action.h"
diff --git a/drivers/staging/rt3070/aironet.h b/drivers/staging/rt3070/aironet.h
index 1e07b19b8cd..78088f2087e 100644
--- a/drivers/staging/rt3070/aironet.h
+++ b/drivers/staging/rt3070/aironet.h
@@ -1,210 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	aironet.h
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Name		Date			Modification logs
-	Paul Lin	04-06-15		Initial
-*/
-
-#ifndef	__AIRONET_H__
-#define	__AIRONET_H__
-
-// Measurement Type definition
-#define	MSRN_TYPE_UNUSED				0
-#define	MSRN_TYPE_CHANNEL_LOAD_REQ		1
-#define	MSRN_TYPE_NOISE_HIST_REQ		2
-#define	MSRN_TYPE_BEACON_REQ			3
-#define	MSRN_TYPE_FRAME_REQ				4
-
-// Scan Mode in Beacon Request
-#define	MSRN_SCAN_MODE_PASSIVE			0
-#define	MSRN_SCAN_MODE_ACTIVE			1
-#define	MSRN_SCAN_MODE_BEACON_TABLE		2
-
-// PHY type definition for Aironet beacon report, CCX 2 table 36-9
-#define	PHY_FH							1
-#define	PHY_DSS							2
-#define	PHY_UNUSED						3
-#define	PHY_OFDM						4
-#define	PHY_HR_DSS						5
-#define	PHY_ERP							6
-
-// RPI table in dBm
-#define	RPI_0			0			//	Power <= -87
-#define	RPI_1			1			//	-87 < Power <= -82
-#define	RPI_2			2			//	-82 < Power <= -77
-#define	RPI_3			3			//	-77 < Power <= -72
-#define	RPI_4			4			//	-72 < Power <= -67
-#define	RPI_5			5			//	-67 < Power <= -62
-#define	RPI_6			6			//	-62 < Power <= -57
-#define	RPI_7			7			//	-57 < Power
-
-// Cisco Aironet IAPP definetions
-#define	AIRONET_IAPP_TYPE					0x32
-#define	AIRONET_IAPP_SUBTYPE_REQUEST		0x01
-#define	AIRONET_IAPP_SUBTYPE_REPORT			0x81
-
-// Measurement Request detail format
-typedef	struct	_MEASUREMENT_REQUEST	{
-	UCHAR	Channel;
-	UCHAR	ScanMode;			// Use only in beacon request, other requests did not use this field
-	USHORT	Duration;
-}	MEASUREMENT_REQUEST, *PMEASUREMENT_REQUEST;
-
-// Beacon Measurement Report
-// All these field might change to UCHAR, because we didn't do anything to these report.
-// We copy all these beacons and report to CCX 2 AP.
-typedef	struct	_BEACON_REPORT	{
-	UCHAR	Channel;
-	UCHAR	Spare;
-	USHORT	Duration;
-	UCHAR	PhyType;			// Definiation is listed above table 36-9
-	UCHAR	RxPower;
-	UCHAR	BSSID[6];
-	UCHAR	ParentTSF[4];
-	UCHAR	TargetTSF[8];
-	USHORT	BeaconInterval;
-	USHORT	CapabilityInfo;
-}	BEACON_REPORT, *PBEACON_REPORT;
-
-// Frame Measurement Report (Optional)
-typedef	struct	_FRAME_REPORT	{
-	UCHAR	Channel;
-	UCHAR	Spare;
-	USHORT	Duration;
-	UCHAR	TA;
-	UCHAR	BSSID[6];
-	UCHAR	RSSI;
-	UCHAR	Count;
-}	FRAME_REPORT, *PFRAME_REPORT;
-
-#pragma pack(1)
-// Channel Load Report
-typedef	struct	_CHANNEL_LOAD_REPORT	{
-	UCHAR	Channel;
-	UCHAR	Spare;
-	USHORT	Duration;
-	UCHAR	CCABusy;
-}	CHANNEL_LOAD_REPORT, *PCHANNEL_LOAD_REPORT;
-#pragma pack()
-
-// Nosie Histogram Report
-typedef	struct	_NOISE_HIST_REPORT	{
-	UCHAR	Channel;
-	UCHAR	Spare;
-	USHORT	Duration;
-	UCHAR	Density[8];
-}	NOISE_HIST_REPORT, *PNOISE_HIST_REPORT;
-
-// Radio Management Capability element
-typedef	struct	_RADIO_MANAGEMENT_CAPABILITY	{
-	UCHAR	Eid;				// TODO: Why the Eid is 1 byte, not normal 2 bytes???
-	UCHAR	Length;
-	UCHAR	AironetOui[3];		// AIronet OUI (00 40 96)
-	UCHAR	Type;				// Type / Version
-	USHORT	Status;				// swap16 required
-}	RADIO_MANAGEMENT_CAPABILITY, *PRADIO_MANAGEMENT_CAPABILITY;
-
-// Measurement Mode Bit definition
-typedef	struct	_MEASUREMENT_MODE	{
-	UCHAR	Rsvd:4;
-	UCHAR	Report:1;
-	UCHAR	NotUsed:1;
-	UCHAR	Enable:1;
-	UCHAR	Parallel:1;
-}	MEASUREMENT_MODE, *PMEASUREMENT_MODE;
-
-// Measurement Request element, This is little endian mode
-typedef	struct	_MEASUREMENT_REQUEST_ELEMENT	{
-	USHORT				Eid;
-	USHORT				Length;				// swap16 required
-	USHORT				Token;				// non-zero unique token
-	UCHAR				Mode;				// Measurement Mode
-	UCHAR				Type;				// Measurement type
-}	MEASUREMENT_REQUEST_ELEMENT, *PMEASUREMENT_REQUEST_ELEMENT;
-
-// Measurement Report element, This is little endian mode
-typedef	struct	_MEASUREMENT_REPORT_ELEMENT	{
-	USHORT				Eid;
-	USHORT				Length;				// swap16 required
-	USHORT				Token;				// non-zero unique token
-	UCHAR				Mode;				// Measurement Mode
-	UCHAR				Type;				// Measurement type
-}	MEASUREMENT_REPORT_ELEMENT, *PMEASUREMENT_REPORT_ELEMENT;
-
-// Cisco Aironet IAPP Frame Header, Network byte order used
-typedef	struct	_AIRONET_IAPP_HEADER {
-	UCHAR	CiscoSnapHeader[8];	// 8 bytes Cisco snap header
-	USHORT	Length;				// IAPP ID & length, remember to swap16 in LE system
-	UCHAR	Type;				// IAPP type
-	UCHAR	SubType;			// IAPP subtype
-	UCHAR	DA[6];				// Destination MAC address
-	UCHAR	SA[6];				// Source MAC address
-	USHORT	Token;				// Dialog token, no need to swap16 since it is for yoken usage only
-}	AIRONET_IAPP_HEADER, *PAIRONET_IAPP_HEADER;
-
-// Radio Measurement Request frame
-typedef	struct	_AIRONET_RM_REQUEST_FRAME	{
-    AIRONET_IAPP_HEADER	IAPP;			// Common header
-	UCHAR				Delay;			// Activation Delay
-	UCHAR				Offset;			// Measurement offset
-}	AIRONET_RM_REQUEST_FRAME, *PAIRONET_RM_REQUEST_FRAME;
-
-// Radio Measurement Report frame
-typedef	struct	_AIRONET_RM_REPORT_FRAME	{
-    AIRONET_IAPP_HEADER	IAPP;			// Common header
-}	AIRONET_RM_REPORT_FRAME, *PAIRONET_RM_REPORT_FRAME;
-
-// Saved element request actions which will saved in StaCfg.
-typedef	struct	_RM_REQUEST_ACTION	{
-	MEASUREMENT_REQUEST_ELEMENT	ReqElem;		// Saved request element
-	MEASUREMENT_REQUEST			Measurement;	// Saved measurement within the request element
-}	RM_REQUEST_ACTION, *PRM_REQUEST_ACTION;
-
-// CCX administration control
-typedef	union	_CCX_CONTROL	{
-	struct	{
-		UINT32		Enable:1;			// Enable CCX2
-		UINT32		LeapEnable:1;		// Enable LEAP at CCX2
-		UINT32		RMEnable:1;			// Radio Measurement Enable
-		UINT32		DCRMEnable:1;		// Non serving channel Radio Measurement enable
-		UINT32		QOSEnable:1;		// Enable QOS for CCX 2.0 support
-		UINT32		FastRoamEnable:1;	// Enable fast roaming
-		UINT32		Rsvd:2;				// Not used
-		UINT32		dBmToRoam:8;		// the condition to roam when receiving Rssi less than this value. It's negative value.
-		UINT32		TuLimit:16;			// Limit for different channel scan
-	}	field;
-	UINT32			word;
-}	CCX_CONTROL, *PCCX_CONTROL;
-
-#endif	// __AIRONET_H__
+#include "../rt2870/aironet.h"
diff --git a/drivers/staging/rt3070/ap.h b/drivers/staging/rt3070/ap.h
index f5ba042e52b..ab8de4bbad0 100644
--- a/drivers/staging/rt3070/ap.h
+++ b/drivers/staging/rt3070/ap.h
@@ -1,557 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-    ap.h
-
-    Abstract:
-    Miniport generic portion header file
-
-    Revision History:
-    Who         When          What
-    --------    ----------    ----------------------------------------------
-    Paul Lin    08-01-2002    created
-    James Tan   09-06-2002    modified (Revise NTCRegTable)
-    John Chang  12-22-2004    modified for RT2561/2661. merge with STA driver
-*/
-#ifndef __AP_H__
-#define __AP_H__
-
-
-
-// ========================= AP RTMP.h ================================
-
-
-
-// =============================================================
-//      Function Prototypes
-// =============================================================
-
-// ap_data.c
-
-BOOLEAN APBridgeToWirelessSta(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          pHeader,
-    IN  UINT            HdrLen,
-    IN  PUCHAR          pData,
-    IN  UINT            DataLen,
-    IN  ULONG           fromwdsidx);
-
-BOOLEAN APHandleRxDoneInterrupt(
-    IN  PRTMP_ADAPTER   pAd);
-
-VOID	APSendPackets(
-	IN	NDIS_HANDLE		MiniportAdapterContext,
-	IN	PPNDIS_PACKET	ppPacketArray,
-	IN	UINT			NumberOfPackets);
-
-NDIS_STATUS APSendPacket(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PNDIS_PACKET    pPacket);
-
-
-NDIS_STATUS APHardTransmit(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk,
-	IN	UCHAR			QueIdx);
-
-VOID APRxEAPOLFrameIndicate(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MAC_TABLE_ENTRY	*pEntry,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID);
-
-NDIS_STATUS APCheckRxError(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PRT28XX_RXD_STRUC		pRxD,
-	IN	UCHAR			Wcid);
-
-BOOLEAN APCheckClass2Class3Error(
-    IN  PRTMP_ADAPTER   pAd,
-	IN ULONG Wcid,
-	IN  PHEADER_802_11  pHeader);
-
-VOID APHandleRxPsPoll(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pAddr,
-	IN	USHORT			Aid,
-    IN	BOOLEAN			isActive);
-
-VOID    RTMPDescriptorEndianChange(
-    IN  PUCHAR          pData,
-    IN  ULONG           DescriptorType);
-
-VOID    RTMPFrameEndianChange(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          pData,
-    IN  ULONG           Dir,
-    IN  BOOLEAN         FromRxDoneInt);
-
-// ap_assoc.c
-
-VOID APAssocStateMachineInit(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  STATE_MACHINE *S,
-    OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID  APPeerAssocReqAction(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  MLME_QUEUE_ELEM *Elem);
-
-VOID  APPeerReassocReqAction(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  MLME_QUEUE_ELEM *Elem);
-
-VOID  APPeerDisassocReqAction(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  MLME_QUEUE_ELEM *Elem);
-
-VOID MbssKickOutStas(
-	IN PRTMP_ADAPTER pAd,
-	IN INT apidx,
-	IN USHORT Reason);
-
-VOID APMlmeKickOutSta(
-    IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pStaAddr,
-	IN UCHAR Wcid,
-	IN USHORT Reason);
-
-VOID APMlmeDisassocReqAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-
-VOID  APCls3errAction(
-    IN  PRTMP_ADAPTER   pAd,
-	IN 	ULONG Wcid,
-    IN	PHEADER_802_11	pHeader);
-
-
-USHORT APBuildAssociation(
-    IN PRTMP_ADAPTER pAd,
-    IN MAC_TABLE_ENTRY *pEntry,
-    IN USHORT CapabilityInfo,
-    IN UCHAR  MaxSupportedRateIn500Kbps,
-    IN UCHAR  *RSN,
-    IN UCHAR  *pRSNLen,
-    IN BOOLEAN bWmmCapable,
-    IN ULONG  RalinkIe,
-#ifdef DOT11N_DRAFT3
-    IN EXT_CAP_INFO_ELEMENT ExtCapInfo,
-#endif // DOT11N_DRAFT3 //
-	IN HT_CAPABILITY_IE		*pHtCapability,
-	IN UCHAR		 HtCapabilityLen,
-    OUT USHORT *pAid);
-
-/*
-VOID	RTMPAddClientSec(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR	BssIdx,
-	IN UCHAR		 KeyIdx,
-	IN UCHAR		 CipherAlg,
-	IN PUCHAR		 pKey,
-	IN PUCHAR		 pTxMic,
-	IN PUCHAR		 pRxMic,
-	IN MAC_TABLE_ENTRY *pEntry);
-*/
-
-// ap_auth.c
-
-void APAuthStateMachineInit(
-    IN PRTMP_ADAPTER pAd,
-    IN STATE_MACHINE *Sm,
-    OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID APMlmeDeauthReqAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-
-VOID APCls2errAction(
-    IN PRTMP_ADAPTER pAd,
-	IN 	ULONG Wcid,
-    IN	PHEADER_802_11	pHeader);
-
-// ap_authrsp.c
-
-VOID APAuthRspStateMachineInit(
-    IN PRTMP_ADAPTER pAd,
-    IN PSTATE_MACHINE Sm,
-    IN STATE_MACHINE_FUNC Trans[]);
-
-VOID APPeerAuthAtAuthRspIdleAction(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  MLME_QUEUE_ELEM *Elem);
-
-VOID APPeerDeauthReqAction(
-    IN PRTMP_ADAPTER	pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-
-VOID APPeerAuthSimpleRspGenAndSend(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PHEADER_802_11 pHdr80211,
-    IN  USHORT Alg,
-    IN  USHORT Seq,
-    IN  USHORT StatusCode);
-
-// ap_connect.c
-
-BOOLEAN BeaconTransmitRequired(
-	IN PRTMP_ADAPTER	pAd,
-	IN INT				apidx);
-
-VOID APMakeBssBeacon(
-    IN  PRTMP_ADAPTER   pAd,
-	IN	INT				apidx);
-
-VOID  APUpdateBeaconFrame(
-    IN  PRTMP_ADAPTER   pAd,
-	IN	INT				apidx);
-
-VOID APMakeAllBssBeacon(
-    IN  PRTMP_ADAPTER   pAd);
-
-VOID  APUpdateAllBeaconFrame(
-    IN  PRTMP_ADAPTER   pAd);
-
-
-// ap_sync.c
-
-VOID APSyncStateMachineInit(
-    IN PRTMP_ADAPTER pAd,
-    IN STATE_MACHINE *Sm,
-    OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID APScanTimeout(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-VOID APInvalidStateWhenScan(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID APScanTimeoutAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID APPeerProbeReqAction(
-    IN  PRTMP_ADAPTER pAd,
-    IN  MLME_QUEUE_ELEM *Elem);
-
-VOID APPeerBeaconAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-
-VOID APMlmeScanReqAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID APPeerBeaconAtScanAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID APScanCnclAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID ApSiteSurvey(
-	IN PRTMP_ADAPTER pAd);
-
-VOID SupportRate(
-	IN PUCHAR SupRate,
-	IN UCHAR SupRateLen,
-	IN PUCHAR ExtRate,
-	IN UCHAR ExtRateLen,
-	OUT PUCHAR *Rates,
-	OUT PUCHAR RatesLen,
-	OUT PUCHAR pMaxSupportRate);
-
-
-BOOLEAN ApScanRunning(
-	IN PRTMP_ADAPTER pAd);
-
-#ifdef DOT11N_DRAFT3
-VOID APOverlappingBSSScan(
-	IN RTMP_ADAPTER *pAd);
-#endif // DOT11N_DRAFT3 //
-
-// ap_wpa.c
-
-VOID APWpaStateMachineInit(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  STATE_MACHINE *Sm,
-    OUT STATE_MACHINE_FUNC Trans[]);
-
-// ap_mlme.c
-
-VOID APMlmePeriodicExec(
-    IN  PRTMP_ADAPTER   pAd);
-
-VOID APMlmeSelectTxRateTable(
-	IN PRTMP_ADAPTER		pAd,
-	IN PMAC_TABLE_ENTRY		pEntry,
-	IN PUCHAR				*ppTable,
-	IN PUCHAR				pTableSize,
-	IN PUCHAR				pInitTxRateIdx);
-
-VOID APMlmeSetTxRate(
-	IN PRTMP_ADAPTER		pAd,
-	IN PMAC_TABLE_ENTRY		pEntry,
-	IN PRTMP_TX_RATE_SWITCH	pTxRate);
-
-VOID APMlmeDynamicTxRateSwitching(
-    IN PRTMP_ADAPTER pAd);
-
-VOID APQuickResponeForRateUpExec(
-    IN PVOID SystemSpecific1,
-    IN PVOID FunctionContext,
-    IN PVOID SystemSpecific2,
-    IN PVOID SystemSpecific3);
-
-BOOLEAN APMsgTypeSubst(
-    IN PRTMP_ADAPTER pAd,
-    IN PFRAME_802_11 pFrame,
-    OUT INT *Machine,
-    OUT INT *MsgType);
-
-VOID APQuickResponeForRateUpExec(
-    IN PVOID SystemSpecific1,
-    IN PVOID FunctionContext,
-    IN PVOID SystemSpecific2,
-    IN PVOID SystemSpecific3);
-
-#ifdef RT2870
-VOID BeaconUpdateExec(
-    IN PVOID SystemSpecific1,
-    IN PVOID FunctionContext,
-    IN PVOID SystemSpecific2,
-    IN PVOID SystemSpecific3);
-#endif // RT2870 //
-
-VOID RTMPSetPiggyBack(
-	IN PRTMP_ADAPTER	pAd,
-	IN BOOLEAN			bPiggyBack);
-
-VOID APAsicEvaluateRxAnt(
-	IN PRTMP_ADAPTER	pAd);
-
-VOID APAsicRxAntEvalTimeout(
-	IN PRTMP_ADAPTER	pAd);
-
-// ap.c
-
-VOID APSwitchChannel(
-	IN PRTMP_ADAPTER pAd,
-	IN INT Channel);
-
-NDIS_STATUS APInitialize(
-    IN  PRTMP_ADAPTER   pAd);
-
-VOID APShutdown(
-    IN PRTMP_ADAPTER    pAd);
-
-VOID APStartUp(
-    IN  PRTMP_ADAPTER   pAd);
-
-VOID APStop(
-    IN  PRTMP_ADAPTER   pAd);
-
-VOID APCleanupPsQueue(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PQUEUE_HEADER   pQueue);
-
-VOID MacTableReset(
-    IN  PRTMP_ADAPTER   pAd);
-
-MAC_TABLE_ENTRY *MacTableInsertEntry(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          pAddr,
-	IN	UCHAR			apidx,
-	IN BOOLEAN	CleanAll);
-
-BOOLEAN MacTableDeleteEntry(
-    IN  PRTMP_ADAPTER   pAd,
-	IN USHORT wcid,
-    IN  PUCHAR          pAddr);
-
-MAC_TABLE_ENTRY *MacTableLookup(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          pAddr);
-
-VOID MacTableMaintenance(
-    IN PRTMP_ADAPTER pAd);
-
-UINT32 MacTableAssocStaNumGet(
-	IN PRTMP_ADAPTER pAd);
-
-MAC_TABLE_ENTRY *APSsPsInquiry(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          pAddr,
-    OUT SST             *Sst,
-    OUT USHORT          *Aid,
-    OUT UCHAR           *PsMode,
-    OUT UCHAR           *Rate);
-
-BOOLEAN APPsIndicate(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          pAddr,
-	IN ULONG Wcid,
-    IN  UCHAR           Psm);
-
-VOID ApLogEvent(
-    IN PRTMP_ADAPTER    pAd,
-    IN PUCHAR           pAddr,
-    IN USHORT           Event);
-
-#ifdef DOT11_N_SUPPORT
-VOID APUpdateOperationMode(
-    IN PRTMP_ADAPTER pAd);
-#endif // DOT11_N_SUPPORT //
-
-VOID APUpdateCapabilityAndErpIe(
-	IN PRTMP_ADAPTER pAd);
-
-BOOLEAN ApCheckAccessControlList(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR        pAddr,
-	IN UCHAR         Apidx);
-
-VOID ApUpdateAccessControlList(
-    IN PRTMP_ADAPTER pAd,
-    IN UCHAR         Apidx);
-
-VOID ApEnqueueNullFrame(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR        pAddr,
-	IN UCHAR         TxRate,
-	IN UCHAR         PID,
-	IN UCHAR         apidx,
-    IN BOOLEAN       bQosNull,
-    IN BOOLEAN       bEOSP,
-    IN UCHAR         OldUP);
-
-VOID ApSendFrame(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PVOID           pBuffer,
-    IN  ULONG           Length,
-    IN  UCHAR           TxRate,
-    IN  UCHAR           PID);
-
-VOID ApEnqueueAckFrame(
-    IN PRTMP_ADAPTER pAd,
-    IN PUCHAR        pAddr,
-    IN UCHAR         TxRate,
-	IN UCHAR         apidx);
-
-UCHAR APAutoSelectChannel(
-	IN PRTMP_ADAPTER pAd,
-	IN BOOLEAN Optimal);
-
-// ap_sanity.c
-
-
-BOOLEAN PeerAssocReqCmmSanity(
-    IN PRTMP_ADAPTER pAd,
-	IN BOOLEAN isRessoc,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pAddr2,
-    OUT USHORT *pCapabilityInfo,
-    OUT USHORT *pListenInterval,
-    OUT PUCHAR pApAddr,
-    OUT UCHAR *pSsidLen,
-    OUT char *Ssid,
-    OUT UCHAR *pRatesLen,
-    OUT UCHAR Rates[],
-    OUT UCHAR *RSN,
-    OUT UCHAR *pRSNLen,
-    OUT BOOLEAN *pbWmmCapable,
-    OUT ULONG  *pRalinkIe,
-#ifdef DOT11N_DRAFT3
-    OUT EXT_CAP_INFO_ELEMENT	*pExtCapInfo,
-#endif // DOT11N_DRAFT3 //
-    OUT UCHAR		 *pHtCapabilityLen,
-    OUT HT_CAPABILITY_IE *pHtCapability);
-
-
-BOOLEAN PeerDisassocReqSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pAddr2,
-    OUT USHORT *Reason);
-
-BOOLEAN PeerDeauthReqSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pAddr2,
-    OUT USHORT *Reason);
-
-BOOLEAN APPeerAuthSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-	OUT PUCHAR pAddr1,
-    OUT PUCHAR pAddr2,
-    OUT USHORT *Alg,
-    OUT USHORT *Seq,
-    OUT USHORT *Status,
-    CHAR *ChlgText);
-
-BOOLEAN APPeerProbeReqSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pAddr2,
-    OUT CHAR Ssid[],
-    OUT UCHAR *SsidLen);
-
-BOOLEAN APPeerBeaconAndProbeRspSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pAddr2,
-    OUT PUCHAR pBssid,
-    OUT CHAR Ssid[],
-    OUT UCHAR *SsidLen,
-    OUT UCHAR *BssType,
-    OUT USHORT *BeaconPeriod,
-    OUT UCHAR *Channel,
-    OUT LARGE_INTEGER *Timestamp,
-    OUT USHORT *CapabilityInfo,
-    OUT UCHAR Rate[],
-    OUT UCHAR *RateLen,
-    OUT BOOLEAN *ExtendedRateIeExist,
-    OUT UCHAR *Erp);
-
-
-// ================== end of AP RTMP.h ========================
-
-
-#endif  // __AP_H__
-
+#include "../rt2870/ap.h"
diff --git a/drivers/staging/rt3070/chlist.h b/drivers/staging/rt3070/chlist.h
index 7151e8668cb..8ee1ff527f5 100644
--- a/drivers/staging/rt3070/chlist.h
+++ b/drivers/staging/rt3070/chlist.h
@@ -1,1253 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	chlist.c
-
-	Abstract:
-
-	Revision History:
-	Who         When          What
-	--------    ----------    ----------------------------------------------
-	Fonchi Wu   2007-12-19    created
-*/
-
-#ifndef __CHLIST_H__
-#define __CHLIST_H__
-
-#include "rtmp_type.h"
-#include "rtmp_def.h"
-
-
-#define ODOR			0
-#define IDOR			1
-#define BOTH			2
-
-#define BAND_5G         0
-#define BAND_24G        1
-#define BAND_BOTH       2
-
-typedef struct _CH_DESP {
-	UCHAR FirstChannel;
-	UCHAR NumOfCh;
-	CHAR MaxTxPwr;			// dBm
-	UCHAR Geography;			// 0:out door, 1:in door, 2:both
-	BOOLEAN DfsReq;			// Dfs require, 0: No, 1: yes.
-} CH_DESP, *PCH_DESP;
-
-typedef struct _CH_REGION {
-	UCHAR CountReg[3];
-	UCHAR DfsType;			// 0: CE, 1: FCC, 2: JAP, 3:JAP_W53, JAP_W56
-	CH_DESP ChDesp[10];
-} CH_REGION, *PCH_REGION;
-
-static CH_REGION ChRegion[] =
-{
-		{	// Antigua and Berbuda
-			"AG",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  23, BOTH, FALSE},	// 5G, ch 52~64
-				{ 100, 11, 30, BOTH, FALSE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Argentina
-			"AR",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 52,  4,  24, BOTH, FALSE},	// 5G, ch 52~64
-				{ 149, 4,  30, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Aruba
-			"AW",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  23, BOTH, FALSE},	// 5G, ch 52~64
-				{ 100, 11, 30, BOTH, FALSE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Australia
-			"AU",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  24, BOTH, FALSE},	// 5G, ch 52~64
-				{ 149, 5,  30, BOTH, FALSE},	// 5G, ch 149~165
-				{ 0},							// end
-			}
-		},
-
-		{	// Austria
-			"AT",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  23, IDOR, TRUE},		// 5G, ch 36~48
-				{ 52,  4,  23, IDOR, TRUE},		// 5G, ch 52~64
-				{ 100, 11, 30, BOTH, TRUE},		// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Bahamas
-			"BS",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  24, BOTH, FALSE},	// 5G, ch 52~64
-				{ 149, 5,  30, BOTH, FALSE},	// 5G, ch 149~165
-				{ 0},							// end
-			}
-		},
-
-		{	// Barbados
-			"BB",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  24, BOTH, FALSE},	// 5G, ch 52~64
-				{ 100, 11, 30, BOTH, FALSE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Bermuda
-			"BM",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  24, BOTH, FALSE},	// 5G, ch 52~64
-				{ 100, 11, 30, BOTH, FALSE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Brazil
-			"BR",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  24, BOTH, FALSE},	// 5G, ch 52~64
-				{ 100, 11, 24, BOTH, FALSE},	// 5G, ch 100~140
-				{ 149, 5,  30, BOTH, FALSE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Belgium
-			"BE",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  18, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  18, IDOR, FALSE},	// 5G, ch 52~64
-				{ 0},							// end
-			}
-		},
-
-		{	// Bulgaria
-			"BG",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11, 30, ODOR, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Canada
-			"CA",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  23, BOTH, FALSE},	// 5G, ch 52~64
-				{ 149, 5,  30, BOTH, FALSE},	// 5G, ch 149~165
-				{ 0},							// end
-			}
-		},
-
-		{	// Cayman IsLands
-			"KY",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  24, BOTH, FALSE},	// 5G, ch 52~64
-				{ 100, 11, 30, BOTH, FALSE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Chile
-			"CL",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  20, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  20, BOTH, FALSE},	// 5G, ch 52~64
-				{ 149, 5,  20, BOTH, FALSE},	// 5G, ch 149~165
-				{ 0},							// end
-			}
-		},
-
-		{	// China
-			"CN",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 149, 4,  27, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Colombia
-			"CO",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  17, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  24, BOTH, FALSE},	// 5G, ch 52~64
-				{ 100, 11, 30, BOTH, FALSE},	// 5G, ch 100~140
-				{ 149, 5,  30, BOTH, FALSE},	// 5G, ch 149~165
-				{ 0},							// end
-			}
-		},
-
-		{	// Costa Rica
-			"CR",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  17, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  24, BOTH, FALSE},	// 5G, ch 52~64
-				{ 149, 4,  30, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Cyprus
-			"CY",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  24, IDOR, TRUE},		// 5G, ch 52~64
-				{ 100, 11, 30, BOTH, TRUE},		// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Czech_Republic
-			"CZ",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  23, IDOR, TRUE},		// 5G, ch 52~64
-				{ 0},							// end
-			}
-		},
-
-		{	// Denmark
-			"DK",
-			CE,
-			{
-				{ 1,   13, 20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,  4,  23, IDOR, TRUE},		// 5G, ch 52~64
-				{ 100, 11, 30, BOTH, TRUE},		// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Dominican Republic
-			"DO",
-			CE,
-			{
-				{ 1,   0,  20, BOTH, FALSE},	// 2.4 G, ch 0
-				{ 149, 4,  20, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Equador
-			"EC",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 100, 11,  27, BOTH, FALSE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// El Salvador
-			"SV",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,   23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,  4,   30, BOTH, TRUE},	// 5G, ch 52~64
-				{ 149, 4,   36, BOTH, TRUE},	// 5G, ch 149~165
-				{ 0},							// end
-			}
-		},
-
-		{	// Finland
-			"FI",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,   23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,  4,   23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// France
-			"FR",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,   23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,  4,   23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 0},							// end
-			}
-		},
-
-		{	// Germany
-			"DE",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,   23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,  4,   23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Greece
-			"GR",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,   23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,  4,   23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, ODOR, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Guam
-			"GU",
-			CE,
-			{
-				{ 1,   11,  20, BOTH, FALSE},	// 2.4 G, ch 1~11
-				{ 36,  4,   17, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,   24, BOTH, FALSE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, FALSE},	// 5G, ch 100~140
-				{ 149,  5,  30, BOTH, FALSE},	// 5G, ch 149~165
-				{ 0},							// end
-			}
-		},
-
-		{	// Guatemala
-			"GT",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,   17, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,   24, BOTH, FALSE},	// 5G, ch 52~64
-				{ 149,  4,  30, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Haiti
-			"HT",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,  4,   17, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,  4,   24, BOTH, FALSE},	// 5G, ch 52~64
-				{ 149,  4,  30, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Honduras
-			"HN",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 149,  4,  27, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Hong Kong
-			"HK",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  23, IDOR, FALSE},	// 5G, ch 52~64
-				{ 149,  4,  30, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Hungary
-			"HU",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 0},							// end
-			}
-		},
-
-		{	// Iceland
-			"IS",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// India
-			"IN",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 149, 	4,  24, IDOR, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Indonesia
-			"ID",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 149, 	4,  27, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Ireland
-			"IE",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36, 	4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52, 	4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, ODOR, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Israel
-			"IL",
-			CE,
-			{
-				{ 1,    3,  20, IDOR, FALSE},	// 2.4 G, ch 1~3
-				{ 4, 	6,  20, BOTH, FALSE},	// 2.4 G, ch 4~9
-				{ 10, 	4,  20, IDOR, FALSE},	// 2.4 G, ch 10~13
-				{ 0},							// end
-			}
-		},
-
-		{	// Italy
-			"IT",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36, 	4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52, 	4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, ODOR, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Japan
-			"JP",
-			JAP,
-			{
-				{ 1,   14,  20, BOTH, FALSE},	// 2.4 G, ch 1~14
-				{ 34, 	4,  23, IDOR, FALSE},	// 5G, ch 34~46
-				{ 0},							// end
-			}
-		},
-
-		{	// Jordan
-			"JO",
-			CE,
-			{
-				{ 1,   13,  20, IDOR, FALSE},	// 2.4 G, ch 1~13
-				{ 36, 	4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 149, 	4,  23, IDOR, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Latvia
-			"LV",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36, 	4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52, 	4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Liechtenstein
-			"LI",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 52, 	4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Lithuania
-			"LT",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36, 	4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52, 	4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Luxemburg
-			"LU",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36, 	4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52, 	4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Malaysia
-			"MY",
-			CE,
-			{
-				{ 36, 	4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52, 	4,  23, BOTH, FALSE},	// 5G, ch 52~64
-				{ 149,  5,  20, BOTH, FALSE},	// 5G, ch 149~165
-				{ 0},							// end
-			}
-		},
-
-		{	// Malta
-			"MT",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36, 	4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52, 	4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Marocco
-			"MA",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36, 	4,  24, IDOR, FALSE},	// 5G, ch 36~48
-				{ 0},							// end
-			}
-		},
-
-		{	// Mexico
-			"MX",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36, 	4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52, 	4,  24, BOTH, FALSE},	// 5G, ch 52~64
-				{ 149,  5,  30, IDOR, FALSE},	// 5G, ch 149~165
-				{ 0},							// end
-			}
-		},
-
-		{	// Netherlands
-			"NL",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36, 	4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52, 	4,  24, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// New Zealand
-			"NZ",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36, 	4,  24, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52, 	4,  24, BOTH, FALSE},	// 5G, ch 52~64
-				{ 149,  4,  30, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Norway
-			"NO",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36, 	4,  24, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52, 	4,  24, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Peru
-			"PE",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 149,  4,  27, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Portugal
-			"PT",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Poland
-			"PL",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Romania
-			"RO",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Russia
-			"RU",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 149,  4,  20, IDOR, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Saudi Arabia
-			"SA",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  23, BOTH, FALSE},	// 5G, ch 52~64
-				{ 149,  4,  23, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Serbia_and_Montenegro
-			"CS",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 0},							// end
-			}
-		},
-
-		{	// Singapore
-			"SG",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  23, BOTH, FALSE},	// 5G, ch 52~64
-				{ 149,  4,  20, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Slovakia
-			"SK",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Slovenia
-			"SI",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 0},							// end
-			}
-		},
-
-		{	// South Africa
-			"ZA",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  23, IDOR, FALSE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 149,  4,  30, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// South Korea
-			"KR",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  20, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  20, BOTH, FALSE},	// 5G, ch 52~64
-				{ 100,  8,  20, BOTH, FALSE},	// 5G, ch 100~128
-				{ 149,  4,  20, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Spain
-			"ES",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  17, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Sweden
-			"SE",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  23, IDOR, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Switzerland
-			"CH",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~13
-				{ 36,   4,  23, IDOR, TRUE},	// 5G, ch 36~48
-				{ 52,   4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 0},							// end
-			}
-		},
-
-		{	// Taiwan
-			"TW",
-			CE,
-			{
-				{ 1,   11,  30, BOTH, FALSE},	// 2.4 G, ch 1~11
-				{ 52,   4,  23, IDOR, FALSE},	// 5G, ch 52~64
-				{ 0},							// end
-			}
-		},
-
-		{	// Turkey
-			"TR",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~11
-				{ 36,   4,  23, BOTH, FALSE},	// 5G, ch 36~48
-				{ 52,   4,  23, BOTH, FALSE},	// 5G, ch 52~64
-				{ 0},							// end
-			}
-		},
-
-		{	// UK
-			"GB",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~11
-				{ 36,   4,  23, IDOR, FALSE},	// 5G, ch 52~64
-				{ 52,   4,  23, IDOR, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 0},							// end
-			}
-		},
-
-		{	// Ukraine
-			"UA",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~11
-				{ 0},							// end
-			}
-		},
-
-		{	// United_Arab_Emirates
-			"AE",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~11
-				{ 0},							// end
-			}
-		},
-
-		{	// United_States
-			"US",
-			CE,
-			{
-				{ 1,   11,  30, BOTH, FALSE},	// 2.4 G, ch 1~11
-				{ 36,   4,  17, IDOR, FALSE},	// 5G, ch 52~64
-				{ 52,   4,  24, BOTH, TRUE},	// 5G, ch 52~64
-				{ 100, 11,  30, BOTH, TRUE},	// 5G, ch 100~140
-				{ 149,  5,  30, BOTH, FALSE},	// 5G, ch 149~165
-				{ 0},							// end
-			}
-		},
-
-		{	// Venezuela
-			"VE",
-			CE,
-			{
-				{ 1,   13,  20, BOTH, FALSE},	// 2.4 G, ch 1~11
-				{ 149,  4,  27, BOTH, FALSE},	// 5G, ch 149~161
-				{ 0},							// end
-			}
-		},
-
-		{	// Default
-			"",
-			CE,
-			{
-				{ 1,   11,  20, BOTH, FALSE},	// 2.4 G, ch 1~11
-				{ 36,   4,  20, BOTH, FALSE},	// 5G, ch 52~64
-				{ 52,   4,  20, BOTH, FALSE},	// 5G, ch 52~64
-				{ 100, 11,  20, BOTH, FALSE},	// 5G, ch 100~140
-				{ 149,  5,  20, BOTH, FALSE},	// 5G, ch 149~165
-				{ 0},							// end
-			}
-		},
-};
-
-static inline PCH_REGION GetChRegion(
-	IN PUCHAR CntryCode)
-{
-	INT loop = 0;
-	PCH_REGION pChRegion = NULL;
-
-	while (strcmp(ChRegion[loop].CountReg, "") != 0)
-	{
-		if (strncmp(ChRegion[loop].CountReg, CntryCode, 2) == 0)
-		{
-			pChRegion = &ChRegion[loop];
-			break;
-		}
-		loop++;
-	}
-
-	if (pChRegion == NULL)
-		pChRegion = &ChRegion[loop];
-	return pChRegion;
-}
-
-static inline VOID ChBandCheck(
-	IN UCHAR PhyMode,
-	OUT PUCHAR pChType)
-{
-	switch(PhyMode)
-	{
-		case PHY_11A:
-#ifdef DOT11_N_SUPPORT
-		case PHY_11AN_MIXED:
-#endif // DOT11_N_SUPPORT //
-			*pChType = BAND_5G;
-			break;
-		case PHY_11ABG_MIXED:
-#ifdef DOT11_N_SUPPORT
-		case PHY_11AGN_MIXED:
-		case PHY_11ABGN_MIXED:
-#endif // DOT11_N_SUPPORT //
-			*pChType = BAND_BOTH;
-			break;
-
-		default:
-			*pChType = BAND_24G;
-			break;
-	}
-}
-
-static inline UCHAR FillChList(
-	IN PRTMP_ADAPTER pAd,
-	IN PCH_DESP pChDesp,
-	IN UCHAR Offset,
-	IN UCHAR increment)
-{
-	INT i, j, l;
-	UCHAR channel;
-
-	j = Offset;
-	for (i = 0; i < pChDesp->NumOfCh; i++)
-	{
-		channel = pChDesp->FirstChannel + i * increment;
-		for (l=0; l<MAX_NUM_OF_CHANNELS; l++)
-		{
-			if (channel == pAd->TxPower[l].Channel)
-			{
-				pAd->ChannelList[j].Power = pAd->TxPower[l].Power;
-				pAd->ChannelList[j].Power2 = pAd->TxPower[l].Power2;
-				break;
-			}
-		}
-		if (l == MAX_NUM_OF_CHANNELS)
-			continue;
-
-		pAd->ChannelList[j].Channel = pChDesp->FirstChannel + i * increment;
-		pAd->ChannelList[j].MaxTxPwr = pChDesp->MaxTxPwr;
-		pAd->ChannelList[j].DfsReq = pChDesp->DfsReq;
-		j++;
-	}
-	pAd->ChannelListNum = j;
-
-	return j;
-}
-
-static inline VOID CreateChList(
-	IN PRTMP_ADAPTER pAd,
-	IN PCH_REGION pChRegion,
-	IN UCHAR Geography)
-{
-	INT i;
-	UCHAR offset = 0;
-	PCH_DESP pChDesp;
-	UCHAR ChType;
-	UCHAR increment;
-
-	if (pChRegion == NULL)
-		return;
-
-	ChBandCheck(pAd->CommonCfg.PhyMode, &ChType);
-
-	for (i=0; i<10; i++)
-	{
-		pChDesp = &pChRegion->ChDesp[i];
-		if (pChDesp->FirstChannel == 0)
-			break;
-
-		if (ChType == BAND_5G)
-		{
-			if (pChDesp->FirstChannel <= 14)
-				continue;
-		}
-		else if (ChType == BAND_24G)
-		{
-			if (pChDesp->FirstChannel > 14)
-				continue;
-		}
-
-		if ((pChDesp->Geography == BOTH)
-			|| (pChDesp->Geography == Geography))
-        {
-			if (pChDesp->FirstChannel > 14)
-                increment = 4;
-            else
-                increment = 1;
-			offset = FillChList(pAd, pChDesp, offset, increment);
-        }
-	}
-}
-
-static inline VOID BuildChannelListEx(
-	IN PRTMP_ADAPTER pAd)
-{
-	PCH_REGION pChReg;
-
-	pChReg = GetChRegion(pAd->CommonCfg.CountryCode);
-	CreateChList(pAd, pChReg, pAd->CommonCfg.Geography);
-}
-
-static inline VOID BuildBeaconChList(
-	IN PRTMP_ADAPTER pAd,
-	OUT PUCHAR pBuf,
-	OUT	PULONG pBufLen)
-{
-	INT i;
-	ULONG TmpLen;
-	PCH_REGION pChRegion;
-	PCH_DESP pChDesp;
-	UCHAR ChType;
-
-	pChRegion = GetChRegion(pAd->CommonCfg.CountryCode);
-
-	if (pChRegion == NULL)
-		return;
-
-	ChBandCheck(pAd->CommonCfg.PhyMode, &ChType);
-	*pBufLen = 0;
-
-	for (i=0; i<10; i++)
-	{
-		pChDesp = &pChRegion->ChDesp[i];
-		if (pChDesp->FirstChannel == 0)
-			break;
-
-		if (ChType == BAND_5G)
-		{
-			if (pChDesp->FirstChannel <= 14)
-				continue;
-		}
-		else if (ChType == BAND_24G)
-		{
-			if (pChDesp->FirstChannel > 14)
-				continue;
-		}
-
-		if ((pChDesp->Geography == BOTH)
-			|| (pChDesp->Geography == pAd->CommonCfg.Geography))
-		{
-			MakeOutgoingFrame(pBuf + *pBufLen,		&TmpLen,
-								1,                 	&pChDesp->FirstChannel,
-								1,                 	&pChDesp->NumOfCh,
-								1,                 	&pChDesp->MaxTxPwr,
-								END_OF_ARGS);
-			*pBufLen += TmpLen;
-		}
-	}
-}
-
-
-#ifdef DOT11_N_SUPPORT
-static inline BOOLEAN IsValidChannel(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR channel)
-
-{
-	INT i;
-
-	for (i = 0; i < pAd->ChannelListNum; i++)
-	{
-		if (pAd->ChannelList[i].Channel == channel)
-			break;
-	}
-
-	if (i == pAd->ChannelListNum)
-		return FALSE;
-	else
-		return TRUE;
-}
-
-
-static inline UCHAR GetExtCh(
-	IN UCHAR Channel,
-	IN UCHAR Direction)
-{
-	CHAR ExtCh;
-
-	if (Direction == EXTCHA_ABOVE)
-		ExtCh = Channel + 4;
-	else
-		ExtCh = (Channel - 4) > 0 ? (Channel - 4) : 0;
-
-	return ExtCh;
-}
-
-
-static inline VOID N_ChannelCheck(
-	IN PRTMP_ADAPTER pAd)
-{
-	//UCHAR ChannelNum = pAd->ChannelListNum;
-	UCHAR Channel = pAd->CommonCfg.Channel;
-
-	if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) && (pAd->CommonCfg.RegTransmitSetting.field.BW  == BW_40))
-	{
-		if (Channel > 14)
-		{
-			if ((Channel == 36) || (Channel == 44) || (Channel == 52) || (Channel == 60) || (Channel == 100) || (Channel == 108) ||
-			    (Channel == 116) || (Channel == 124) || (Channel == 132) || (Channel == 149) || (Channel == 157))
-			{
-				pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_ABOVE;
-			}
-			else if ((Channel == 40) || (Channel == 48) || (Channel == 56) || (Channel == 64) || (Channel == 104) || (Channel == 112) ||
-					(Channel == 120) || (Channel == 128) || (Channel == 136) || (Channel == 153) || (Channel == 161))
-			{
-				pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_BELOW;
-			}
-			else
-			{
-				pAd->CommonCfg.RegTransmitSetting.field.BW  = BW_20;
-			}
-		}
-		else
-		{
-			do
-			{
-				UCHAR ExtCh;
-				UCHAR Dir = pAd->CommonCfg.RegTransmitSetting.field.EXTCHA;
-				ExtCh = GetExtCh(Channel, Dir);
-				if (IsValidChannel(pAd, ExtCh))
-					break;
-
-				Dir = (Dir == EXTCHA_ABOVE) ? EXTCHA_BELOW : EXTCHA_ABOVE;
-				ExtCh = GetExtCh(Channel, Dir);
-				if (IsValidChannel(pAd, ExtCh))
-				{
-					pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = Dir;
-					break;
-				}
-				pAd->CommonCfg.RegTransmitSetting.field.BW  = BW_20;
-			} while(FALSE);
-
-			if (Channel == 14)
-			{
-				pAd->CommonCfg.RegTransmitSetting.field.BW  = BW_20;
-				//pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_NONE;	// We didn't set the ExtCh as NONE due to it'll set in RTMPSetHT()
-			}
-		}
-	}
-
-
-}
-
-
-static inline VOID N_SetCenCh(
-	IN PRTMP_ADAPTER pAd)
-{
-	if (pAd->CommonCfg.RegTransmitSetting.field.BW == BW_40)
-	{
-		if (pAd->CommonCfg.RegTransmitSetting.field.EXTCHA == EXTCHA_ABOVE)
-		{
-			pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel + 2;
-		}
-		else
-		{
-			if (pAd->CommonCfg.Channel == 14)
-				pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel - 1;
-			else
-				pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel - 2;
-		}
-	}
-	else
-	{
-		pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel;
-	}
-}
-#endif // DOT11_N_SUPPORT //
-
-
-static inline UINT8 GetCuntryMaxTxPwr(
-	IN PRTMP_ADAPTER pAd,
-	IN UINT8 channel)
-{
-	int i;
-	for (i = 0; i < pAd->ChannelListNum; i++)
-	{
-		if (pAd->ChannelList[i].Channel == channel)
-			break;
-	}
-
-	if (i == pAd->ChannelListNum)
-		return 0xff;
-	else
-		return pAd->ChannelList[i].MaxTxPwr;
-}
-#endif // __CHLIST_H__
-
+#include "../rt2870/chlist.h"
diff --git a/drivers/staging/rt3070/common/2870_rtmp_init.c b/drivers/staging/rt3070/common/2870_rtmp_init.c
index fdf8dc176a6..5456454b8d3 100644
--- a/drivers/staging/rt3070/common/2870_rtmp_init.c
+++ b/drivers/staging/rt3070/common/2870_rtmp_init.c
@@ -1,1762 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	2870_rtmp_init.c
-
-	Abstract:
-	Miniport generic portion header file
-
-	Revision History:
-	Who         When          What
-	--------    ----------    ----------------------------------------------
-	Paul Lin    2002-08-01    created
-    John Chang  2004-08-20    RT2561/2661 use scatter-gather scheme
-    Jan Lee  	2006-09-15    RT2860. Change for 802.11n , EEPROM, Led, BA, HT.
-	Sample Lin	2007-05-31    Merge RT2860 and RT2870 drivers.
-*/
-
-#include	"../rt_config.h"
-
-
-static void rx_done_tasklet(unsigned long data);
-static void rt2870_hcca_dma_done_tasklet(unsigned long data);
-static void rt2870_ac3_dma_done_tasklet(unsigned long data);
-static void rt2870_ac2_dma_done_tasklet(unsigned long data);
-static void rt2870_ac1_dma_done_tasklet(unsigned long data);
-static void rt2870_ac0_dma_done_tasklet(unsigned long data);
-static void rt2870_mgmt_dma_done_tasklet(unsigned long data);
-static void rt2870_null_frame_complete_tasklet(unsigned long data);
-static void rt2870_rts_frame_complete_tasklet(unsigned long data);
-static void rt2870_pspoll_frame_complete_tasklet(unsigned long data);
-static void rt2870_dataout_complete_tasklet(unsigned long data);
-
-
-/*
-========================================================================
-Routine Description:
-    Initialize receive data structures.
-
-Arguments:
-    pAd					Pointer to our adapter
-
-Return Value:
-	NDIS_STATUS_SUCCESS
-	NDIS_STATUS_RESOURCES
-
-Note:
-	Initialize all receive releated private buffer, include those define
-	in RTMP_ADAPTER structure and all private data structures. The mahor
-	work is to allocate buffer for each packet and chain buffer to
-	NDIS packet descriptor.
-========================================================================
-*/
-NDIS_STATUS	NICInitRecv(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	UCHAR				i;
-	NDIS_STATUS			Status = NDIS_STATUS_SUCCESS;
-	POS_COOKIE			pObj = (POS_COOKIE) pAd->OS_Cookie;
-
-
-	DBGPRINT(RT_DEBUG_TRACE, ("--> NICInitRecv\n"));
-	pObj = pObj;
-
-	//InterlockedExchange(&pAd->PendingRx, 0);
-	pAd->PendingRx = 0;
-	pAd->NextRxBulkInReadIndex 	= 0;	// Next Rx Read index
-	pAd->NextRxBulkInIndex		= 0 ; //RX_RING_SIZE -1; // Rx Bulk pointer
-	pAd->NextRxBulkInPosition 	= 0;
-
-	for (i = 0; i < (RX_RING_SIZE); i++)
-	{
-		PRX_CONTEXT  pRxContext = &(pAd->RxContext[i]);
-
-		//Allocate URB
-		pRxContext->pUrb = RTUSB_ALLOC_URB(0);
-		if (pRxContext->pUrb == NULL)
-		{
-			Status = NDIS_STATUS_RESOURCES;
-			goto out1;
-		}
-
-		// Allocate transfer buffer
-		pRxContext->TransferBuffer = RTUSB_URB_ALLOC_BUFFER(pObj->pUsb_Dev, MAX_RXBULK_SIZE, &pRxContext->data_dma);
-		if (pRxContext->TransferBuffer == NULL)
-		{
-			Status = NDIS_STATUS_RESOURCES;
-			goto out1;
-		}
-
-		NdisZeroMemory(pRxContext->TransferBuffer, MAX_RXBULK_SIZE);
-
-		pRxContext->pAd	= pAd;
-		pRxContext->pIrp = NULL;
-		pRxContext->InUse		= FALSE;
-		pRxContext->IRPPending	= FALSE;
-		pRxContext->Readable	= FALSE;
-		//pRxContext->ReorderInUse = FALSE;
-		pRxContext->bRxHandling = FALSE;
-		pRxContext->BulkInOffset = 0;
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<-- NICInitRecv\n"));
-	return Status;
-
-out1:
-	for (i = 0; i < (RX_RING_SIZE); i++)
-	{
-		PRX_CONTEXT  pRxContext = &(pAd->RxContext[i]);
-
-		if (NULL != pRxContext->TransferBuffer)
-		{
-			RTUSB_URB_FREE_BUFFER(pObj->pUsb_Dev, MAX_RXBULK_SIZE,
-								pRxContext->TransferBuffer, pRxContext->data_dma);
-			pRxContext->TransferBuffer = NULL;
-		}
-
-		if (NULL != pRxContext->pUrb)
-		{
-			RTUSB_UNLINK_URB(pRxContext->pUrb);
-			RTUSB_FREE_URB(pRxContext->pUrb);
-			pRxContext->pUrb = NULL;
-		}
-	}
-
-	return Status;
-}
-
-
-/*
-========================================================================
-Routine Description:
-    Initialize transmit data structures.
-
-Arguments:
-    pAd					Pointer to our adapter
-
-Return Value:
-	NDIS_STATUS_SUCCESS
-	NDIS_STATUS_RESOURCES
-
-Note:
-========================================================================
-*/
-NDIS_STATUS	NICInitTransmit(
-	IN	PRTMP_ADAPTER	pAd)
-{
-#define LM_USB_ALLOC(pObj, Context, TB_Type, BufferSize, Status, msg1, err1, msg2, err2)	\
-	Context->pUrb = RTUSB_ALLOC_URB(0);		\
-	if (Context->pUrb == NULL) {			\
-		DBGPRINT(RT_DEBUG_ERROR, msg1);		\
-		Status = NDIS_STATUS_RESOURCES;		\
-		goto err1; }						\
-											\
-	Context->TransferBuffer = 				\
-		(TB_Type)RTUSB_URB_ALLOC_BUFFER(pObj->pUsb_Dev, BufferSize, &Context->data_dma);	\
-	if (Context->TransferBuffer == NULL) {	\
-		DBGPRINT(RT_DEBUG_ERROR, msg2);		\
-		Status = NDIS_STATUS_RESOURCES;		\
-		goto err2; }
-
-#define LM_URB_FREE(pObj, Context, BufferSize)				\
-	if (NULL != Context->pUrb) {							\
-		RTUSB_UNLINK_URB(Context->pUrb);					\
-		RTUSB_FREE_URB(Context->pUrb);						\
-		Context->pUrb = NULL; }								\
-	if (NULL != Context->TransferBuffer) {				\
-		RTUSB_URB_FREE_BUFFER(pObj->pUsb_Dev, BufferSize,	\
-								Context->TransferBuffer,	\
-								Context->data_dma);			\
-		Context->TransferBuffer = NULL; }
-
-	UCHAR			i, acidx;
-	NDIS_STATUS     Status = NDIS_STATUS_SUCCESS;
-	PTX_CONTEXT		pNullContext   = &(pAd->NullContext);
-	PTX_CONTEXT		pPsPollContext = &(pAd->PsPollContext);
-	PTX_CONTEXT		pRTSContext    = &(pAd->RTSContext);
-	PTX_CONTEXT		pMLMEContext = NULL;
-//	PHT_TX_CONTEXT	pHTTXContext = NULL;
-	POS_COOKIE		pObj = (POS_COOKIE) pAd->OS_Cookie;
-	PVOID			RingBaseVa;
-//	RTMP_TX_RING	*pTxRing;
-	RTMP_MGMT_RING  *pMgmtRing;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("--> NICInitTransmit\n"));
-	pObj = pObj;
-
-	// Init 4 set of Tx parameters
-	for(acidx = 0; acidx < NUM_OF_TX_RING; acidx++)
-	{
-		// Initialize all Transmit releated queues
-		InitializeQueueHeader(&pAd->TxSwQueue[acidx]);
-
-		// Next Local tx ring pointer waiting for buck out
-		pAd->NextBulkOutIndex[acidx] = acidx;
-		pAd->BulkOutPending[acidx] = FALSE; // Buck Out control flag
-		//pAd->DataBulkDoneIdx[acidx] = 0;
-	}
-
-	//pAd->NextMLMEIndex	= 0;
-	//pAd->PushMgmtIndex	= 0;
-	//pAd->PopMgmtIndex	= 0;
-	//InterlockedExchange(&pAd->MgmtQueueSize, 0);
-	//InterlockedExchange(&pAd->TxCount, 0);
-
-	//pAd->PrioRingFirstIndex	= 0;
-	//pAd->PrioRingTxCnt		= 0;
-
-	do
-	{
-		//
-		// TX_RING_SIZE, 4 ACs
-		//
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		for(acidx=0; acidx<4; acidx++)
-#endif // CONFIG_STA_SUPPORT //
-		{
-#if 1 //def DOT11_N_SUPPORT
-			PHT_TX_CONTEXT	pHTTXContext = &(pAd->TxContext[acidx]);
-
-			NdisZeroMemory(pHTTXContext, sizeof(HT_TX_CONTEXT));
-			//Allocate URB
-			LM_USB_ALLOC(pObj, pHTTXContext, PHTTX_BUFFER, sizeof(HTTX_BUFFER), Status,
-							("<-- ERROR in Alloc TX TxContext[%d] urb!! \n", acidx),
-							done,
-							("<-- ERROR in Alloc TX TxContext[%d] HTTX_BUFFER !! \n", acidx),
-							out1);
-
-			NdisZeroMemory(pHTTXContext->TransferBuffer->Aggregation, 4);
-			pHTTXContext->pAd = pAd;
-			pHTTXContext->pIrp = NULL;
-			pHTTXContext->IRPPending = FALSE;
-			pHTTXContext->NextBulkOutPosition = 0;
-			pHTTXContext->ENextBulkOutPosition = 0;
-			pHTTXContext->CurWritePosition = 0;
-			pHTTXContext->CurWriteRealPos = 0;
-			pHTTXContext->BulkOutSize = 0;
-			pHTTXContext->BulkOutPipeId = acidx;
-			pHTTXContext->bRingEmpty = TRUE;
-			pHTTXContext->bCopySavePad = FALSE;
-#endif // DOT11_N_SUPPORT //
-			pAd->BulkOutPending[acidx] = FALSE;
-		}
-
-
-		//
-		// MGMT_RING_SIZE
-		//
-		// Allocate MGMT ring descriptor's memory
-		pAd->MgmtDescRing.AllocSize = MGMT_RING_SIZE * sizeof(TX_CONTEXT);
-		RTMPAllocateMemory(&pAd->MgmtDescRing.AllocVa, pAd->MgmtDescRing.AllocSize);
-		if (pAd->MgmtDescRing.AllocVa == NULL)
-		{
-			DBGPRINT_ERR(("Failed to allocate a big buffer for MgmtDescRing!\n"));
-			Status = NDIS_STATUS_RESOURCES;
-			goto out1;
-		}
-		NdisZeroMemory(pAd->MgmtDescRing.AllocVa, pAd->MgmtDescRing.AllocSize);
-		RingBaseVa     = pAd->MgmtDescRing.AllocVa;
-
-		// Initialize MGMT Ring and associated buffer memory
-		pMgmtRing = &pAd->MgmtRing;
-		for (i = 0; i < MGMT_RING_SIZE; i++)
-		{
-			// link the pre-allocated Mgmt buffer to MgmtRing.Cell
-			pMgmtRing->Cell[i].AllocSize = sizeof(TX_CONTEXT);
-			pMgmtRing->Cell[i].AllocVa = RingBaseVa;
-			pMgmtRing->Cell[i].pNdisPacket = NULL;
-			pMgmtRing->Cell[i].pNextNdisPacket = NULL;
-
-			//Allocate URB for MLMEContext
-			pMLMEContext = (PTX_CONTEXT) pAd->MgmtRing.Cell[i].AllocVa;
-			pMLMEContext->pUrb = RTUSB_ALLOC_URB(0);
-			if (pMLMEContext->pUrb == NULL)
-			{
-				DBGPRINT(RT_DEBUG_ERROR, ("<-- ERROR in Alloc TX MLMEContext[%d] urb!! \n", i));
-				Status = NDIS_STATUS_RESOURCES;
-				goto out2;
-			}
-			pMLMEContext->pAd = pAd;
-			pMLMEContext->pIrp = NULL;
-			pMLMEContext->TransferBuffer = NULL;
-			pMLMEContext->InUse = FALSE;
-			pMLMEContext->IRPPending = FALSE;
-			pMLMEContext->bWaitingBulkOut = FALSE;
-			pMLMEContext->BulkOutSize = 0;
-			pMLMEContext->SelfIdx = i;
-
-			// Offset to next ring descriptor address
-			RingBaseVa = (PUCHAR) RingBaseVa + sizeof(TX_CONTEXT);
-		}
-		DBGPRINT(RT_DEBUG_TRACE, ("MGMT Ring: total %d entry allocated\n", i));
-
-		//pAd->MgmtRing.TxSwFreeIdx = (MGMT_RING_SIZE - 1);
-		pAd->MgmtRing.TxSwFreeIdx = MGMT_RING_SIZE;
-		pAd->MgmtRing.TxCpuIdx = 0;
-		pAd->MgmtRing.TxDmaIdx = 0;
-
-		//
-		// BEACON_RING_SIZE
-		//
-		for(i=0; i<BEACON_RING_SIZE; i++) // 2
-		{
-			PTX_CONTEXT	pBeaconContext = &(pAd->BeaconContext[i]);
-
-
-			NdisZeroMemory(pBeaconContext, sizeof(TX_CONTEXT));
-
-			//Allocate URB
-			LM_USB_ALLOC(pObj, pBeaconContext, PTX_BUFFER, sizeof(TX_BUFFER), Status,
-							("<-- ERROR in Alloc TX BeaconContext[%d] urb!! \n", i),
-							out2,
-							("<-- ERROR in Alloc TX BeaconContext[%d] TX_BUFFER !! \n", i),
-							out3);
-
-			pBeaconContext->pAd = pAd;
-			pBeaconContext->pIrp = NULL;
-			pBeaconContext->InUse = FALSE;
-			pBeaconContext->IRPPending = FALSE;
-		}
-
-		//
-		// NullContext
-		//
-		NdisZeroMemory(pNullContext, sizeof(TX_CONTEXT));
-
-		//Allocate URB
-		LM_USB_ALLOC(pObj, pNullContext, PTX_BUFFER, sizeof(TX_BUFFER), Status,
-						("<-- ERROR in Alloc TX NullContext urb!! \n"),
-						out3,
-						("<-- ERROR in Alloc TX NullContext TX_BUFFER !! \n"),
-						out4);
-
-		pNullContext->pAd = pAd;
-		pNullContext->pIrp = NULL;
-		pNullContext->InUse = FALSE;
-		pNullContext->IRPPending = FALSE;
-
-		//
-		// RTSContext
-		//
-		NdisZeroMemory(pRTSContext, sizeof(TX_CONTEXT));
-
-		//Allocate URB
-		LM_USB_ALLOC(pObj, pRTSContext, PTX_BUFFER, sizeof(TX_BUFFER), Status,
-						("<-- ERROR in Alloc TX RTSContext urb!! \n"),
-						out4,
-						("<-- ERROR in Alloc TX RTSContext TX_BUFFER !! \n"),
-						out5);
-
-		pRTSContext->pAd = pAd;
-		pRTSContext->pIrp = NULL;
-		pRTSContext->InUse = FALSE;
-		pRTSContext->IRPPending = FALSE;
-
-		//
-		// PsPollContext
-		//
-		//NdisZeroMemory(pPsPollContext, sizeof(TX_CONTEXT));
-		//Allocate URB
-		LM_USB_ALLOC(pObj, pPsPollContext, PTX_BUFFER, sizeof(TX_BUFFER), Status,
-						("<-- ERROR in Alloc TX PsPollContext urb!! \n"),
-						out5,
-						("<-- ERROR in Alloc TX PsPollContext TX_BUFFER !! \n"),
-						out6);
-
-		pPsPollContext->pAd = pAd;
-		pPsPollContext->pIrp = NULL;
-		pPsPollContext->InUse = FALSE;
-		pPsPollContext->IRPPending = FALSE;
-		pPsPollContext->bAggregatible = FALSE;
-		pPsPollContext->LastOne = TRUE;
-
-	}   while (FALSE);
-
-
-done:
-	DBGPRINT(RT_DEBUG_TRACE, ("<-- NICInitTransmit\n"));
-
-	return Status;
-
-	/* --------------------------- ERROR HANDLE --------------------------- */
-out6:
-	LM_URB_FREE(pObj, pPsPollContext, sizeof(TX_BUFFER));
-
-out5:
-	LM_URB_FREE(pObj, pRTSContext, sizeof(TX_BUFFER));
-
-out4:
-	LM_URB_FREE(pObj, pNullContext, sizeof(TX_BUFFER));
-
-out3:
-	for(i=0; i<BEACON_RING_SIZE; i++)
-	{
-		PTX_CONTEXT	pBeaconContext = &(pAd->BeaconContext[i]);
-		if (pBeaconContext)
-			LM_URB_FREE(pObj, pBeaconContext, sizeof(TX_BUFFER));
-	}
-
-out2:
-	if (pAd->MgmtDescRing.AllocVa)
-	{
-		pMgmtRing = &pAd->MgmtRing;
-	for(i=0; i<MGMT_RING_SIZE; i++)
-	{
-		pMLMEContext = (PTX_CONTEXT) pAd->MgmtRing.Cell[i].AllocVa;
-		if (pMLMEContext)
-			LM_URB_FREE(pObj, pMLMEContext, sizeof(TX_BUFFER));
-	}
-		NdisFreeMemory(pAd->MgmtDescRing.AllocVa, pAd->MgmtDescRing.AllocSize, 0);
-		pAd->MgmtDescRing.AllocVa = NULL;
-	}
-
-out1:
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	for(acidx=0; acidx<4; acidx++)
-#endif // CONFIG_STA_SUPPORT //
-	{
-		PHT_TX_CONTEXT pTxContext = &(pAd->TxContext[acidx]);
-		if (pTxContext)
-			LM_URB_FREE(pObj, pTxContext, sizeof(HTTX_BUFFER));
-	}
-
-	// Here we didn't have any pre-allocated memory need to free.
-
-	return Status;
-}
-
-
-/*
-========================================================================
-Routine Description:
-    Allocate DMA memory blocks for send, receive.
-
-Arguments:
-    pAd					Pointer to our adapter
-
-Return Value:
-	NDIS_STATUS_SUCCESS
-	NDIS_STATUS_FAILURE
-	NDIS_STATUS_RESOURCES
-
-Note:
-========================================================================
-*/
-NDIS_STATUS	RTMPAllocTxRxRingMemory(
-	IN	PRTMP_ADAPTER	pAd)
-{
-//	COUNTER_802_11	pCounter = &pAd->WlanCounters;
-	NDIS_STATUS		Status;
-	INT				num;
-
-
-	DBGPRINT(RT_DEBUG_TRACE, ("--> RTMPAllocTxRxRingMemory\n"));
-
-
-	do
-	{
-		// Init the CmdQ and CmdQLock
-		NdisAllocateSpinLock(&pAd->CmdQLock);
-		NdisAcquireSpinLock(&pAd->CmdQLock);
-		RTUSBInitializeCmdQ(&pAd->CmdQ);
-		NdisReleaseSpinLock(&pAd->CmdQLock);
-
-
-		NdisAllocateSpinLock(&pAd->MLMEBulkOutLock);
-		//NdisAllocateSpinLock(&pAd->MLMEWaitQueueLock);
-		NdisAllocateSpinLock(&pAd->BulkOutLock[0]);
-		NdisAllocateSpinLock(&pAd->BulkOutLock[1]);
-		NdisAllocateSpinLock(&pAd->BulkOutLock[2]);
-		NdisAllocateSpinLock(&pAd->BulkOutLock[3]);
-		NdisAllocateSpinLock(&pAd->BulkOutLock[4]);
-		NdisAllocateSpinLock(&pAd->BulkOutLock[5]);
-		NdisAllocateSpinLock(&pAd->BulkInLock);
-
-		for (num = 0; num < NUM_OF_TX_RING; num++)
-		{
-			NdisAllocateSpinLock(&pAd->TxContextQueueLock[num]);
-		}
-
-#ifdef RALINK_ATE
-		NdisAllocateSpinLock(&pAd->GenericLock);
-#endif // RALINK_ATE //
-
-//		NdisAllocateSpinLock(&pAd->MemLock);	// Not used in RT28XX
-
-//		NdisAllocateSpinLock(&pAd->MacTabLock); // init it in UserCfgInit()
-//		NdisAllocateSpinLock(&pAd->BATabLock); // init it in BATableInit()
-
-//		for(num=0; num<MAX_LEN_OF_BA_REC_TABLE; num++)
-//		{
-//			NdisAllocateSpinLock(&pAd->BATable.BARecEntry[num].RxReRingLock);
-//		}
-
-		//
-		// Init Mac Table
-		//
-//		MacTableInitialize(pAd);
-
-		//
-		// Init send data structures and related parameters
-		//
-		Status = NICInitTransmit(pAd);
-		if (Status != NDIS_STATUS_SUCCESS)
-			break;
-
-		//
-		// Init receive data structures and related parameters
-		//
-		Status = NICInitRecv(pAd);
-		if (Status != NDIS_STATUS_SUCCESS)
-			break;
-
-		pAd->PendingIoCount = 1;
-
-	} while (FALSE);
-
-	NdisZeroMemory(&pAd->FragFrame, sizeof(FRAGMENT_FRAME));
-	pAd->FragFrame.pFragPacket =  RTMP_AllocateFragPacketBuffer(pAd, RX_BUFFER_NORMSIZE);
-
-	if (pAd->FragFrame.pFragPacket == NULL)
-	{
-		Status = NDIS_STATUS_RESOURCES;
-	}
-
-	DBGPRINT_S(Status, ("<-- RTMPAllocTxRxRingMemory, Status=%x\n", Status));
-	return Status;
-}
-
-
-/*
-========================================================================
-Routine Description:
-	Calls USB_InterfaceStop and frees memory allocated for the URBs
-    calls NdisMDeregisterDevice and frees the memory
-    allocated in VNetInitialize for the Adapter Object
-
-Arguments:
-	*pAd				the raxx interface data pointer
-
-Return Value:
-	None
-
-Note:
-========================================================================
-*/
-VOID	RTMPFreeTxRxRingMemory(
-	IN	PRTMP_ADAPTER	pAd)
-{
-#define LM_URB_FREE(pObj, Context, BufferSize)				\
-	if (NULL != Context->pUrb) {							\
-		RTUSB_UNLINK_URB(Context->pUrb);					\
-		RTUSB_FREE_URB(Context->pUrb);						\
-		Context->pUrb = NULL; }								\
-	if (NULL != Context->TransferBuffer) {					\
-		RTUSB_URB_FREE_BUFFER(pObj->pUsb_Dev, BufferSize,	\
-								Context->TransferBuffer,	\
-								Context->data_dma);			\
-		Context->TransferBuffer = NULL; }
-
-
-	UINT                i, acidx;
-	PTX_CONTEXT			pNullContext   = &pAd->NullContext;
-	PTX_CONTEXT			pPsPollContext = &pAd->PsPollContext;
-	PTX_CONTEXT			pRTSContext    = &pAd->RTSContext;
-//	PHT_TX_CONTEXT 		pHTTXContext;
-	//PRTMP_REORDERBUF	pReorderBuf;
-	POS_COOKIE			pObj = (POS_COOKIE) pAd->OS_Cookie;
-//	RTMP_TX_RING		*pTxRing;
-
-	DBGPRINT(RT_DEBUG_ERROR, ("---> RTMPFreeTxRxRingMemory\n"));
-	pObj = pObj;
-
-	// Free all resources for the RECEIVE buffer queue.
-	for(i=0; i<(RX_RING_SIZE); i++)
-	{
-		PRX_CONTEXT  pRxContext = &(pAd->RxContext[i]);
-		if (pRxContext)
-			LM_URB_FREE(pObj, pRxContext, MAX_RXBULK_SIZE);
-	}
-
-	// Free PsPoll frame resource
-	LM_URB_FREE(pObj, pPsPollContext, sizeof(TX_BUFFER));
-
-	// Free NULL frame resource
-	LM_URB_FREE(pObj, pNullContext, sizeof(TX_BUFFER));
-
-	// Free RTS frame resource
-	LM_URB_FREE(pObj, pRTSContext, sizeof(TX_BUFFER));
-
-
-	// Free beacon frame resource
-	for(i=0; i<BEACON_RING_SIZE; i++)
-	{
-		PTX_CONTEXT	pBeaconContext = &(pAd->BeaconContext[i]);
-		if (pBeaconContext)
-			LM_URB_FREE(pObj, pBeaconContext, sizeof(TX_BUFFER));
-	}
-
-
-	// Free mgmt frame resource
-	for(i = 0; i < MGMT_RING_SIZE; i++)
-	{
-		PTX_CONTEXT pMLMEContext = (PTX_CONTEXT)pAd->MgmtRing.Cell[i].AllocVa;
-		//LM_URB_FREE(pObj, pMLMEContext, sizeof(TX_BUFFER));
-		if (NULL != pAd->MgmtRing.Cell[i].pNdisPacket)
-		{
-			RTMPFreeNdisPacket(pAd, pAd->MgmtRing.Cell[i].pNdisPacket);
-			pAd->MgmtRing.Cell[i].pNdisPacket = NULL;
-			pMLMEContext->TransferBuffer = NULL;
-		}
-
-		if (pMLMEContext)
-		{
-			if (NULL != pMLMEContext->pUrb)
-			{
-				RTUSB_UNLINK_URB(pMLMEContext->pUrb);
-				RTUSB_FREE_URB(pMLMEContext->pUrb);
-				pMLMEContext->pUrb = NULL;
-			}
-		}
-	}
-	if (pAd->MgmtDescRing.AllocVa)
-		NdisFreeMemory(pAd->MgmtDescRing.AllocVa, pAd->MgmtDescRing.AllocSize, 0);
-
-
-	// Free Tx frame resource
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		for(acidx=0; acidx<4; acidx++)
-#endif // CONFIG_STA_SUPPORT //
-		{
-		PHT_TX_CONTEXT pHTTXContext = &(pAd->TxContext[acidx]);
-			if (pHTTXContext)
-				LM_URB_FREE(pObj, pHTTXContext, sizeof(HTTX_BUFFER));
-		}
-
-	if (pAd->FragFrame.pFragPacket)
-		RELEASE_NDIS_PACKET(pAd, pAd->FragFrame.pFragPacket, NDIS_STATUS_SUCCESS);
-
-	for(i=0; i<6; i++)
-	{
-		NdisFreeSpinLock(&pAd->BulkOutLock[i]);
-	}
-
-	NdisFreeSpinLock(&pAd->BulkInLock);
-	NdisFreeSpinLock(&pAd->MLMEBulkOutLock);
-
-	NdisFreeSpinLock(&pAd->CmdQLock);
-#ifdef RALINK_ATE
-	NdisFreeSpinLock(&pAd->GenericLock);
-#endif // RALINK_ATE //
-	// Clear all pending bulk-out request flags.
-	RTUSB_CLEAR_BULK_FLAG(pAd, 0xffffffff);
-
-//	NdisFreeSpinLock(&pAd->MacTabLock);
-
-//	for(i=0; i<MAX_LEN_OF_BA_REC_TABLE; i++)
-//	{
-//		NdisFreeSpinLock(&pAd->BATable.BARecEntry[i].RxReRingLock);
-//	}
-
-	DBGPRINT(RT_DEBUG_ERROR, ("<--- ReleaseAdapter\n"));
-}
-
-
-/*
-========================================================================
-Routine Description:
-    Allocate memory for adapter control block.
-
-Arguments:
-    pAd					Pointer to our adapter
-
-Return Value:
-	NDIS_STATUS_SUCCESS
-	NDIS_STATUS_FAILURE
-	NDIS_STATUS_RESOURCES
-
-Note:
-========================================================================
-*/
-NDIS_STATUS AdapterBlockAllocateMemory(
-	IN PVOID	handle,
-	OUT	PVOID	*ppAd)
-{
-	PUSB_DEV	usb_dev;
-	POS_COOKIE	pObj = (POS_COOKIE) handle;
-
-
-	usb_dev = pObj->pUsb_Dev;
-
-	pObj->MLMEThr_pid	= NULL;
-	pObj->RTUSBCmdThr_pid	= NULL;
-
-	*ppAd = (PVOID)vmalloc(sizeof(RTMP_ADAPTER));
-
-	if (*ppAd)
-	{
-		NdisZeroMemory(*ppAd, sizeof(RTMP_ADAPTER));
-		((PRTMP_ADAPTER)*ppAd)->OS_Cookie = handle;
-		return (NDIS_STATUS_SUCCESS);
-	}
-	else
-	{
-		return (NDIS_STATUS_FAILURE);
-	}
-}
-
-
-/*
-========================================================================
-Routine Description:
-    Create kernel threads & tasklets.
-
-Arguments:
-    *net_dev			Pointer to wireless net device interface
-
-Return Value:
-	NDIS_STATUS_SUCCESS
-	NDIS_STATUS_FAILURE
-
-Note:
-========================================================================
-*/
-NDIS_STATUS	 CreateThreads(
-	IN	struct net_device *net_dev)
-{
-	PRTMP_ADAPTER pAd = net_dev->ml_priv;
-	POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;
-	pid_t pid_number;
-
-	//init_MUTEX(&(pAd->usbdev_semaphore));
-
-	init_MUTEX_LOCKED(&(pAd->mlme_semaphore));
-	init_completion (&pAd->mlmeComplete);
-
-	init_MUTEX_LOCKED(&(pAd->RTUSBCmd_semaphore));
-	init_completion (&pAd->CmdQComplete);
-
-	init_MUTEX_LOCKED(&(pAd->RTUSBTimer_semaphore));
-	init_completion (&pAd->TimerQComplete);
-
-	// Creat MLME Thread
-	pObj->MLMEThr_pid = NULL;
-	pid_number = kernel_thread(MlmeThread, pAd, CLONE_VM);
-	if (pid_number < 0)
-	{
-		printk (KERN_WARNING "%s: unable to start Mlme thread\n",pAd->net_dev->name);
-		return NDIS_STATUS_FAILURE;
-	}
-	pObj->MLMEThr_pid = find_get_pid(pid_number);
-	// Wait for the thread to start
-	wait_for_completion(&(pAd->mlmeComplete));
-
-	// Creat Command Thread
-	pObj->RTUSBCmdThr_pid = NULL;
-	pid_number = kernel_thread(RTUSBCmdThread, pAd, CLONE_VM);
-	if (pid_number < 0)
-	{
-		printk (KERN_WARNING "%s: unable to start RTUSBCmd thread\n",pAd->net_dev->name);
-		return NDIS_STATUS_FAILURE;
-	}
-	pObj->RTUSBCmdThr_pid = find_get_pid(pid_number);
-	wait_for_completion(&(pAd->CmdQComplete));
-
-	pObj->TimerQThr_pid = NULL;
-	pid_number = kernel_thread(TimerQThread, pAd, CLONE_VM);
-	if (pid_number < 0)
-	{
-		printk (KERN_WARNING "%s: unable to start TimerQThread\n",pAd->net_dev->name);
-		return NDIS_STATUS_FAILURE;
-	}
-	pObj->TimerQThr_pid = find_get_pid(pid_number);
-	// Wait for the thread to start
-	wait_for_completion(&(pAd->TimerQComplete));
-
-	// Create receive tasklet
-	tasklet_init(&pObj->rx_done_task, rx_done_tasklet, (ULONG)pAd);
-	tasklet_init(&pObj->mgmt_dma_done_task, rt2870_mgmt_dma_done_tasklet, (unsigned long)pAd);
-	tasklet_init(&pObj->ac0_dma_done_task, rt2870_ac0_dma_done_tasklet, (unsigned long)pAd);
-	tasklet_init(&pObj->ac1_dma_done_task, rt2870_ac1_dma_done_tasklet, (unsigned long)pAd);
-	tasklet_init(&pObj->ac2_dma_done_task, rt2870_ac2_dma_done_tasklet, (unsigned long)pAd);
-	tasklet_init(&pObj->ac3_dma_done_task, rt2870_ac3_dma_done_tasklet, (unsigned long)pAd);
-	tasklet_init(&pObj->hcca_dma_done_task, rt2870_hcca_dma_done_tasklet, (unsigned long)pAd);
-	tasklet_init(&pObj->tbtt_task, tbtt_tasklet, (unsigned long)pAd);
-	tasklet_init(&pObj->null_frame_complete_task, rt2870_null_frame_complete_tasklet, (unsigned long)pAd);
-	tasklet_init(&pObj->rts_frame_complete_task, rt2870_rts_frame_complete_tasklet, (unsigned long)pAd);
-	tasklet_init(&pObj->pspoll_frame_complete_task, rt2870_pspoll_frame_complete_tasklet, (unsigned long)pAd);
-
-	return NDIS_STATUS_SUCCESS;
-}
-
-
-#ifdef CONFIG_STA_SUPPORT
-/*
-========================================================================
-Routine Description:
- 	As STA's BSSID is a WC too, it uses shared key table.
- 	This function write correct unicast TX key to ASIC WCID.
- 	And we still make a copy in our MacTab.Content[BSSID_WCID].PairwiseKey.
-	Caller guarantee TKIP/AES always has keyidx = 0. (pairwise key)
-	Caller guarantee WEP calls this function when set Txkey,  default key index=0~3.
-
-Arguments:
-	pAd 					Pointer to our adapter
-	pKey					Pointer to the where the key stored
-
-Return Value:
-	NDIS_SUCCESS			Add key successfully
-
-Note:
-========================================================================
-*/
-VOID	RTMPAddBSSIDCipher(
-	IN	PRTMP_ADAPTER		pAd,
-	IN	UCHAR				Aid,
-	IN	PNDIS_802_11_KEY	pKey,
-	IN  UCHAR   			CipherAlg)
-{
-	PUCHAR		pTxMic, pRxMic;
-	BOOLEAN 	bKeyRSC, bAuthenticator; // indicate the receive SC set by KeyRSC value
-//	UCHAR		CipherAlg;
-	UCHAR		i;
-	ULONG		WCIDAttri;
-	USHORT	 	offset;
-	UCHAR		KeyIdx, IVEIV[8];
-	UINT32		Value;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("RTMPAddBSSIDCipher==> Aid = %d\n",Aid));
-
-	// Bit 29 of Add-key KeyRSC
-	bKeyRSC 	   = (pKey->KeyIndex & 0x20000000) ? TRUE : FALSE;
-
-	// Bit 28 of Add-key Authenticator
-	bAuthenticator = (pKey->KeyIndex & 0x10000000) ? TRUE : FALSE;
-	KeyIdx = (UCHAR)pKey->KeyIndex&0xff;
-
-	if (KeyIdx > 4)
-		return;
-
-
-	if (pAd->MacTab.Content[Aid].PairwiseKey.CipherAlg == CIPHER_TKIP)
-	{	if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
-		{
-			// for WPA-None Tx, Rx MIC is the same
-			pTxMic = (PUCHAR) (&pKey->KeyMaterial) + 16;
-			pRxMic = pTxMic;
-		}
-		else if (bAuthenticator == TRUE)
-		{
-			pTxMic = (PUCHAR) (&pKey->KeyMaterial) + 16;
-			pRxMic = (PUCHAR) (&pKey->KeyMaterial) + 24;
-		}
-		else
-		{
-			pRxMic = (PUCHAR) (&pKey->KeyMaterial) + 16;
-			pTxMic = (PUCHAR) (&pKey->KeyMaterial) + 24;
-		}
-
-		offset = PAIRWISE_KEY_TABLE_BASE + (Aid * HW_KEY_ENTRY_SIZE) + 0x10;
-		for (i=0; i<8; )
-		{
-			Value = *(pTxMic+i);
-			Value += (*(pTxMic+i+1)<<8);
-			Value += (*(pTxMic+i+2)<<16);
-			Value += (*(pTxMic+i+3)<<24);
-			RTUSBWriteMACRegister(pAd, offset+i, Value);
-			i+=4;
-		}
-
-		offset = PAIRWISE_KEY_TABLE_BASE + (Aid * HW_KEY_ENTRY_SIZE) + 0x18;
-		for (i=0; i<8; )
-		{
-			Value = *(pRxMic+i);
-			Value += (*(pRxMic+i+1)<<8);
-			Value += (*(pRxMic+i+2)<<16);
-			Value += (*(pRxMic+i+3)<<24);
-			RTUSBWriteMACRegister(pAd, offset+i, Value);
-			i+=4;
-		}
-
-		// Only Key lenth equal to TKIP key have these
-		NdisMoveMemory(pAd->MacTab.Content[Aid].PairwiseKey.RxMic, pRxMic, 8);
-		NdisMoveMemory(pAd->MacTab.Content[Aid].PairwiseKey.TxMic, pTxMic, 8);
-
-		DBGPRINT(RT_DEBUG_TRACE,
-				("	TxMIC  = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x \n",
-				pTxMic[0],pTxMic[1],pTxMic[2],pTxMic[3],
-				pTxMic[4],pTxMic[5],pTxMic[6],pTxMic[7]));
-		DBGPRINT(RT_DEBUG_TRACE,
-				("	RxMIC  = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x \n",
-				pRxMic[0],pRxMic[1],pRxMic[2],pRxMic[3],
-				pRxMic[4],pRxMic[5],pRxMic[6],pRxMic[7]));
-	}
-
-	// 2. Record Security Key.
-	pAd->MacTab.Content[BSSID_WCID].PairwiseKey.KeyLen= (UCHAR)pKey->KeyLength;
-	NdisMoveMemory(pAd->MacTab.Content[Aid].PairwiseKey.Key, &pKey->KeyMaterial, pKey->KeyLength);
-
-	// 3. Check RxTsc. And used to init to ASIC IV.
-	if (bKeyRSC == TRUE)
-		NdisMoveMemory(pAd->MacTab.Content[Aid].PairwiseKey.RxTsc, &pKey->KeyRSC, 6);
-	else
-		NdisZeroMemory(pAd->MacTab.Content[Aid].PairwiseKey.RxTsc, 6);
-
-	// 4. Init TxTsc to one based on WiFi WPA specs
-	pAd->MacTab.Content[Aid].PairwiseKey.TxTsc[0] = 1;
-	pAd->MacTab.Content[Aid].PairwiseKey.TxTsc[1] = 0;
-	pAd->MacTab.Content[Aid].PairwiseKey.TxTsc[2] = 0;
-	pAd->MacTab.Content[Aid].PairwiseKey.TxTsc[3] = 0;
-	pAd->MacTab.Content[Aid].PairwiseKey.TxTsc[4] = 0;
-	pAd->MacTab.Content[Aid].PairwiseKey.TxTsc[5] = 0;
-
-	CipherAlg = pAd->MacTab.Content[Aid].PairwiseKey.CipherAlg;
-
-	offset = PAIRWISE_KEY_TABLE_BASE + (Aid * HW_KEY_ENTRY_SIZE);
-	RTUSBMultiWrite(pAd, (USHORT) offset, pKey->KeyMaterial,
-				((pKey->KeyLength == LEN_TKIP_KEY) ? 16 : (USHORT)pKey->KeyLength));
-
-	offset = SHARED_KEY_TABLE_BASE + (KeyIdx * HW_KEY_ENTRY_SIZE);
-	RTUSBMultiWrite(pAd, (USHORT) offset, pKey->KeyMaterial, (USHORT)pKey->KeyLength);
-
-	offset = PAIRWISE_IVEIV_TABLE_BASE + (Aid * HW_IVEIV_ENTRY_SIZE);
-	NdisZeroMemory(IVEIV, 8);
-
-	// IV/EIV
-	if ((CipherAlg == CIPHER_TKIP) ||
-		(CipherAlg == CIPHER_TKIP_NO_MIC) ||
-		(CipherAlg == CIPHER_AES))
-	{
-		IVEIV[3] = 0x20; // Eiv bit on. keyid always 0 for pairwise key
-	}
-	// default key idx needs to set.
-	// in TKIP/AES KeyIdx = 0 , WEP KeyIdx is default tx key.
-	else
-	{
-		IVEIV[3] |= (KeyIdx<< 6);
-	}
-	RTUSBMultiWrite(pAd, (USHORT) offset, IVEIV, 8);
-
-	// WCID Attribute UDF:3, BSSIdx:3, Alg:3, Keytable:1=PAIRWISE KEY, BSSIdx is 0
-	if ((CipherAlg == CIPHER_TKIP) ||
-		(CipherAlg == CIPHER_TKIP_NO_MIC) ||
-		(CipherAlg == CIPHER_AES))
-	{
-		WCIDAttri = (CipherAlg<<1)|SHAREDKEYTABLE;
-	}
-	else
-		WCIDAttri = (CipherAlg<<1)|SHAREDKEYTABLE;
-
-	offset = MAC_WCID_ATTRIBUTE_BASE + (Aid* HW_WCID_ATTRI_SIZE);
-	RTUSBWriteMACRegister(pAd, offset, WCIDAttri);
-	RTUSBReadMACRegister(pAd, offset, &Value);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("BSSID_WCID : offset = %x, WCIDAttri = %lx\n",
-			offset, WCIDAttri));
-
-	// pAddr
-	// Add Bssid mac address at linkup. not here.  check!
-	/*offset = MAC_WCID_BASE + (BSSID_WCID * HW_WCID_ENTRY_SIZE);
-	*for (i=0; i<MAC_ADDR_LEN; i++)
-	{
-		RTMP_IO_WRITE8(pAd, offset+i, pKey->BSSID[i]);
-	}
-	*/
-
-	DBGPRINT(RT_DEBUG_ERROR, ("AddBSSIDasWCIDEntry: Alg=%s, KeyLength = %d\n",
-			CipherName[CipherAlg], pKey->KeyLength));
-	DBGPRINT(RT_DEBUG_TRACE, ("Key [idx=%x] [KeyLen = %d]\n",
-			pKey->KeyIndex, pKey->KeyLength));
-	for(i=0; i<pKey->KeyLength; i++)
-		DBGPRINT_RAW(RT_DEBUG_TRACE,(" %x:", pKey->KeyMaterial[i]));
-	DBGPRINT(RT_DEBUG_TRACE,("	 \n"));
-}
-#endif // CONFIG_STA_SUPPORT //
-
-/*
-========================================================================
-Routine Description:
-    Get a received packet.
-
-Arguments:
-	pAd					device control block
-	pSaveRxD			receive descriptor information
-	*pbReschedule		need reschedule flag
-	*pRxPending			pending received packet flag
-
-Return Value:
-    the recieved packet
-
-Note:
-========================================================================
-*/
-#define RT2870_RXDMALEN_FIELD_SIZE			4
-PNDIS_PACKET GetPacketFromRxRing(
-	IN		PRTMP_ADAPTER		pAd,
-	OUT		PRT28XX_RXD_STRUC	pSaveRxD,
-	OUT		BOOLEAN				*pbReschedule,
-	IN OUT	UINT32				*pRxPending)
-{
-	PRX_CONTEXT		pRxContext;
-	PNDIS_PACKET	pSkb;
-	PUCHAR			pData;
-	ULONG			ThisFrameLen;
-	ULONG			RxBufferLength;
-	PRXWI_STRUC		pRxWI;
-
-	pRxContext = &pAd->RxContext[pAd->NextRxBulkInReadIndex];
-	if ((pRxContext->Readable == FALSE) || (pRxContext->InUse == TRUE))
-		return NULL;
-
-	RxBufferLength = pRxContext->BulkInOffset - pAd->ReadPosition;
-	if (RxBufferLength < (RT2870_RXDMALEN_FIELD_SIZE + sizeof(RXWI_STRUC) + sizeof(RXINFO_STRUC)))
-	{
-		goto label_null;
-	}
-
-	pData = &pRxContext->TransferBuffer[pAd->ReadPosition]; /* 4KB */
-	// The RXDMA field is 4 bytes, now just use the first 2 bytes. The Length including the (RXWI + MSDU + Padding)
-	ThisFrameLen = *pData + (*(pData+1)<<8);
-    if (ThisFrameLen == 0)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("BIRIdx(%d): RXDMALen is zero.[%ld], BulkInBufLen = %ld)\n",
-								pAd->NextRxBulkInReadIndex, ThisFrameLen, pRxContext->BulkInOffset));
-		goto label_null;
-	}
-	if ((ThisFrameLen&0x3) != 0)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("BIRIdx(%d): RXDMALen not multiple of 4.[%ld], BulkInBufLen = %ld)\n",
-								pAd->NextRxBulkInReadIndex, ThisFrameLen, pRxContext->BulkInOffset));
-		goto label_null;
-	}
-
-	if ((ThisFrameLen + 8)> RxBufferLength)	// 8 for (RT2870_RXDMALEN_FIELD_SIZE + sizeof(RXINFO_STRUC))
-	{
-		DBGPRINT(RT_DEBUG_TRACE,("BIRIdx(%d):FrameLen(0x%lx) outranges. BulkInLen=0x%lx, remaining RxBufLen=0x%lx, ReadPos=0x%lx\n",
-						pAd->NextRxBulkInReadIndex, ThisFrameLen, pRxContext->BulkInOffset, RxBufferLength, pAd->ReadPosition));
-
-		// error frame. finish this loop
-		goto label_null;
-	}
-
-	// skip USB frame length field
-	pData += RT2870_RXDMALEN_FIELD_SIZE;
-	pRxWI = (PRXWI_STRUC)pData;
-#ifdef RT_BIG_ENDIAN
-	RTMPWIEndianChange(pData, TYPE_RXWI);
-#endif // RT_BIG_ENDIAN //
-	if (pRxWI->MPDUtotalByteCount > ThisFrameLen)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("%s():pRxWIMPDUtotalByteCount(%d) large than RxDMALen(%ld)\n",
-									__FUNCTION__, pRxWI->MPDUtotalByteCount, ThisFrameLen));
-		goto label_null;
-	}
-#ifdef RT_BIG_ENDIAN
-	RTMPWIEndianChange(pData, TYPE_RXWI);
-#endif // RT_BIG_ENDIAN //
-
-	// allocate a rx packet
-	pSkb = dev_alloc_skb(ThisFrameLen);
-	if (pSkb == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("%s():Cannot Allocate sk buffer for this Bulk-In buffer!\n", __FUNCTION__));
-		goto label_null;
-	}
-
-	// copy the rx packet
-	memcpy(skb_put(pSkb, ThisFrameLen), pData, ThisFrameLen);
-	RTPKT_TO_OSPKT(pSkb)->dev = get_netdev_from_bssid(pAd, BSS0);
-	RTMP_SET_PACKET_SOURCE(OSPKT_TO_RTPKT(pSkb), PKTSRC_NDIS);
-
-	// copy RxD
-	*pSaveRxD = *(PRXINFO_STRUC)(pData + ThisFrameLen);
-#ifdef RT_BIG_ENDIAN
-	RTMPDescriptorEndianChange((PUCHAR)pSaveRxD, TYPE_RXINFO);
-#endif // RT_BIG_ENDIAN //
-
-	// update next packet read position.
-	pAd->ReadPosition += (ThisFrameLen + RT2870_RXDMALEN_FIELD_SIZE + RXINFO_SIZE);	// 8 for (RT2870_RXDMALEN_FIELD_SIZE + sizeof(RXINFO_STRUC))
-
-	return pSkb;
-
-label_null:
-
-	return NULL;
-}
-
-
-/*
-========================================================================
-Routine Description:
-    Handle received packets.
-
-Arguments:
-	data				- URB information pointer
-
-Return Value:
-    None
-
-Note:
-========================================================================
-*/
-static void rx_done_tasklet(unsigned long data)
-{
-	purbb_t 			pUrb;
-	PRX_CONTEXT			pRxContext;
-	PRTMP_ADAPTER		pAd;
-	NTSTATUS			Status;
-	unsigned int		IrqFlags;
-
-	pUrb		= (purbb_t)data;
-	pRxContext	= (PRX_CONTEXT)pUrb->context;
-	pAd 		= pRxContext->pAd;
-	Status = pUrb->status;
-
-
-	RTMP_IRQ_LOCK(&pAd->BulkInLock, IrqFlags);
-	pRxContext->InUse = FALSE;
-	pRxContext->IRPPending = FALSE;
-	pRxContext->BulkInOffset += pUrb->actual_length;
-	//NdisInterlockedDecrement(&pAd->PendingRx);
-	pAd->PendingRx--;
-
-	if (Status == USB_ST_NOERROR)
-	{
-		pAd->BulkInComplete++;
-		pAd->NextRxBulkInPosition = 0;
-		if (pRxContext->BulkInOffset)	// As jan's comment, it may bulk-in success but size is zero.
-		{
-			pRxContext->Readable = TRUE;
-			INC_RING_INDEX(pAd->NextRxBulkInIndex, RX_RING_SIZE);
-		}
-		RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
-	}
-	else	 // STATUS_OTHER
-	{
-		pAd->BulkInCompleteFail++;
-		// Still read this packet although it may comtain wrong bytes.
-		pRxContext->Readable = FALSE;
-		RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
-
-		// Parsing all packets. because after reset, the index will reset to all zero.
-		if ((!RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS |
-									fRTMP_ADAPTER_BULKIN_RESET |
-									fRTMP_ADAPTER_HALT_IN_PROGRESS |
-									fRTMP_ADAPTER_NIC_NOT_EXIST))))
-		{
-
-			DBGPRINT_RAW(RT_DEBUG_ERROR, ("Bulk In Failed. Status=%d, BIIdx=0x%x, BIRIdx=0x%x, actual_length= 0x%x\n",
-							Status, pAd->NextRxBulkInIndex, pAd->NextRxBulkInReadIndex, pRxContext->pUrb->actual_length));
-
-			RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BULKIN_RESET);
-			RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_IN, NULL, 0);
-		}
-	}
-
-	ASSERT((pRxContext->InUse == pRxContext->IRPPending));
-
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-    {
-		// If the driver is in ATE mode and Rx frame is set into here.
-		if (pAd->ContinBulkIn == TRUE)
-		{
-			RTUSBBulkReceive(pAd);
-		}
-	}
-	else
-#endif // RALINK_ATE //
-	RTUSBBulkReceive(pAd);
-
-	return;
-
-}
-
-
-static void rt2870_mgmt_dma_done_tasklet(unsigned long data)
-{
-	PRTMP_ADAPTER 	pAd;
-	PTX_CONTEXT		pMLMEContext;
-	int				index;
-	PNDIS_PACKET	pPacket;
-	purbb_t			pUrb;
-	NTSTATUS		Status;
-	unsigned long	IrqFlags;
-
-
-	pUrb			= (purbb_t)data;
-	pMLMEContext	= (PTX_CONTEXT)pUrb->context;
-	pAd 			= pMLMEContext->pAd;
-	Status			= pUrb->status;
-	index 			= pMLMEContext->SelfIdx;
-
-	ASSERT((pAd->MgmtRing.TxDmaIdx == index));
-
-	RTMP_IRQ_LOCK(&pAd->BulkOutLock[MGMTPIPEIDX], IrqFlags);
-
-
-	if (Status != USB_ST_NOERROR)
-	{
-		//Bulk-Out fail status handle
-		if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)))
-		{
-			DBGPRINT_RAW(RT_DEBUG_ERROR, ("Bulk Out MLME Failed, Status=%d!\n", Status));
-			// TODO: How to handle about the MLMEBulkOut failed issue. Need to resend the mgmt pkt?
-			RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET);
-			pAd->bulkResetPipeid = (MGMTPIPEIDX | BULKOUT_MGMT_RESET_FLAG);
-		}
-	}
-
-	pAd->BulkOutPending[MGMTPIPEIDX] = FALSE;
-	RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[MGMTPIPEIDX], IrqFlags);
-
-	RTMP_IRQ_LOCK(&pAd->MLMEBulkOutLock, IrqFlags);
-	// Reset MLME context flags
-	pMLMEContext->IRPPending = FALSE;
-	pMLMEContext->InUse = FALSE;
-	pMLMEContext->bWaitingBulkOut = FALSE;
-	pMLMEContext->BulkOutSize = 0;
-
-	pPacket = pAd->MgmtRing.Cell[index].pNdisPacket;
-	pAd->MgmtRing.Cell[index].pNdisPacket = NULL;
-
-	// Increase MgmtRing Index
-	INC_RING_INDEX(pAd->MgmtRing.TxDmaIdx, MGMT_RING_SIZE);
-	pAd->MgmtRing.TxSwFreeIdx++;
-	RTMP_IRQ_UNLOCK(&pAd->MLMEBulkOutLock, IrqFlags);
-
-	// No-matter success or fail, we free the mgmt packet.
-	if (pPacket)
-		RTMPFreeNdisPacket(pAd, pPacket);
-
-	if ((RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS |
-								fRTMP_ADAPTER_HALT_IN_PROGRESS |
-								fRTMP_ADAPTER_NIC_NOT_EXIST))))
-	{
-		// do nothing and return directly.
-	}
-	else
-	{
-		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET) &&
-			((pAd->bulkResetPipeid & BULKOUT_MGMT_RESET_FLAG) == BULKOUT_MGMT_RESET_FLAG))
-		{	// For Mgmt Bulk-Out failed, ignore it now.
-			RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT, NULL, 0);
-		}
-		else
-		{
-
-			// Always call Bulk routine, even reset bulk.
-			// The protectioon of rest bulk should be in BulkOut routine
-			if (pAd->MgmtRing.TxSwFreeIdx < MGMT_RING_SIZE /* pMLMEContext->bWaitingBulkOut == TRUE */)
-			{
-				RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_MLME);
-			}
-				RTUSBKickBulkOut(pAd);
-			}
-		}
-
-}
-
-
-static void rt2870_hcca_dma_done_tasklet(unsigned long data)
-{
-	PRTMP_ADAPTER		pAd;
-	PHT_TX_CONTEXT		pHTTXContext;
-	UCHAR				BulkOutPipeId = 4;
-	purbb_t				pUrb;
-
-
-	pUrb			= (purbb_t)data;
-	pHTTXContext	= (PHT_TX_CONTEXT)pUrb->context;
-	pAd				= pHTTXContext->pAd;
-
-	rt2870_dataout_complete_tasklet((unsigned long)pUrb);
-
-	if ((RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS |
-								fRTMP_ADAPTER_HALT_IN_PROGRESS |
-								fRTMP_ADAPTER_NIC_NOT_EXIST))))
-	{
-		// do nothing and return directly.
-	}
-	else
-	{
-		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET))
-		{
-			RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT, NULL, 0);
-		}
-		else
-		{	pHTTXContext = &pAd->TxContext[BulkOutPipeId];
-			if ((pAd->TxSwQueue[BulkOutPipeId].Number > 0) &&
-				/*((pHTTXContext->CurWritePosition > (pHTTXContext->NextBulkOutPosition + 0x6000)) || (pHTTXContext->NextBulkOutPosition > pHTTXContext->CurWritePosition + 0x6000)) && */
-				(pAd->DeQueueRunning[BulkOutPipeId] == FALSE) &&
-				(pHTTXContext->bCurWriting == FALSE))
-			{
-				RTMPDeQueuePacket(pAd, FALSE, BulkOutPipeId, MAX_TX_PROCESS);
-			}
-
-			RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL<<4);
-			RTUSBKickBulkOut(pAd);
-		}
-	}
-
-
-		return;
-}
-
-
-static void rt2870_ac3_dma_done_tasklet(unsigned long data)
-{
-	PRTMP_ADAPTER		pAd;
-	PHT_TX_CONTEXT		pHTTXContext;
-	UCHAR				BulkOutPipeId = 3;
-	purbb_t				pUrb;
-
-
-	pUrb			= (purbb_t)data;
-	pHTTXContext	= (PHT_TX_CONTEXT)pUrb->context;
-	pAd				= pHTTXContext->pAd;
-
-	rt2870_dataout_complete_tasklet((unsigned long)pUrb);
-
-	if ((RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS |
-								fRTMP_ADAPTER_HALT_IN_PROGRESS |
-								fRTMP_ADAPTER_NIC_NOT_EXIST))))
-	{
-		// do nothing and return directly.
-	}
-	else
-	{
-		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET))
-		{
-			RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT, NULL, 0);
-		}
-		else
-		{	pHTTXContext = &pAd->TxContext[BulkOutPipeId];
-			if ((pAd->TxSwQueue[BulkOutPipeId].Number > 0) &&
-				/*((pHTTXContext->CurWritePosition > (pHTTXContext->NextBulkOutPosition + 0x6000)) || (pHTTXContext->NextBulkOutPosition > pHTTXContext->CurWritePosition + 0x6000)) && */
-				(pAd->DeQueueRunning[BulkOutPipeId] == FALSE) &&
-				(pHTTXContext->bCurWriting == FALSE))
-			{
-				RTMPDeQueuePacket(pAd, FALSE, BulkOutPipeId, MAX_TX_PROCESS);
-			}
-
-			RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL<<3);
-			RTUSBKickBulkOut(pAd);
-		}
-	}
-
-
-		return;
-}
-
-
-static void rt2870_ac2_dma_done_tasklet(unsigned long data)
-{
-	PRTMP_ADAPTER		pAd;
-	PHT_TX_CONTEXT		pHTTXContext;
-	UCHAR				BulkOutPipeId = 2;
-	purbb_t				pUrb;
-
-
-	pUrb			= (purbb_t)data;
-	pHTTXContext	= (PHT_TX_CONTEXT)pUrb->context;
-	pAd				= pHTTXContext->pAd;
-
-	rt2870_dataout_complete_tasklet((unsigned long)pUrb);
-
-	if ((RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS |
-								fRTMP_ADAPTER_HALT_IN_PROGRESS |
-								fRTMP_ADAPTER_NIC_NOT_EXIST))))
-	{
-		// do nothing and return directly.
-	}
-	else
-	{
-		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET))
-		{
-			RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT, NULL, 0);
-		}
-		else
-		{	pHTTXContext = &pAd->TxContext[BulkOutPipeId];
-			if ((pAd->TxSwQueue[BulkOutPipeId].Number > 0) &&
-				/*((pHTTXContext->CurWritePosition > (pHTTXContext->NextBulkOutPosition + 0x6000)) || (pHTTXContext->NextBulkOutPosition > pHTTXContext->CurWritePosition + 0x6000)) && */
-				(pAd->DeQueueRunning[BulkOutPipeId] == FALSE) &&
-				(pHTTXContext->bCurWriting == FALSE))
-			{
-				RTMPDeQueuePacket(pAd, FALSE, BulkOutPipeId, MAX_TX_PROCESS);
-			}
-
-			RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL<<2);
-			RTUSBKickBulkOut(pAd);
-		}
-	}
-
-		return;
-}
-
-
-static void rt2870_ac1_dma_done_tasklet(unsigned long data)
-{
-	PRTMP_ADAPTER		pAd;
-	PHT_TX_CONTEXT		pHTTXContext;
-	UCHAR				BulkOutPipeId = 1;
-	purbb_t				pUrb;
-
-
-	pUrb			= (purbb_t)data;
-	pHTTXContext	= (PHT_TX_CONTEXT)pUrb->context;
-	pAd				= pHTTXContext->pAd;
-
-	rt2870_dataout_complete_tasklet((unsigned long)pUrb);
-
-	if ((RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS |
-								fRTMP_ADAPTER_HALT_IN_PROGRESS |
-								fRTMP_ADAPTER_NIC_NOT_EXIST))))
-	{
-		// do nothing and return directly.
-	}
-	else
-	{
-		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET))
-		{
-			RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT, NULL, 0);
-		}
-		else
-		{	pHTTXContext = &pAd->TxContext[BulkOutPipeId];
-			if ((pAd->TxSwQueue[BulkOutPipeId].Number > 0) &&
-				/*((pHTTXContext->CurWritePosition > (pHTTXContext->NextBulkOutPosition + 0x6000)) || (pHTTXContext->NextBulkOutPosition > pHTTXContext->CurWritePosition + 0x6000)) && */
-				(pAd->DeQueueRunning[BulkOutPipeId] == FALSE) &&
-				(pHTTXContext->bCurWriting == FALSE))
-			{
-				RTMPDeQueuePacket(pAd, FALSE, BulkOutPipeId, MAX_TX_PROCESS);
-			}
-
-			RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL<<1);
-			RTUSBKickBulkOut(pAd);
-		}
-	}
-
-
-	return;
-}
-
-
-static void rt2870_ac0_dma_done_tasklet(unsigned long data)
-{
-	PRTMP_ADAPTER		pAd;
-	PHT_TX_CONTEXT		pHTTXContext;
-	UCHAR				BulkOutPipeId = 0;
-	purbb_t				pUrb;
-
-
-	pUrb			= (purbb_t)data;
-	pHTTXContext	= (PHT_TX_CONTEXT)pUrb->context;
-	pAd				= pHTTXContext->pAd;
-
-	rt2870_dataout_complete_tasklet((unsigned long)pUrb);
-
-	if ((RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS |
-								fRTMP_ADAPTER_HALT_IN_PROGRESS |
-								fRTMP_ADAPTER_NIC_NOT_EXIST))))
-	{
-		// do nothing and return directly.
-	}
-	else
-	{
-		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET))
-		{
-			RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT, NULL, 0);
-		}
-		else
-		{	pHTTXContext = &pAd->TxContext[BulkOutPipeId];
-			if ((pAd->TxSwQueue[BulkOutPipeId].Number > 0) &&
-				/*  ((pHTTXContext->CurWritePosition > (pHTTXContext->NextBulkOutPosition + 0x6000)) || (pHTTXContext->NextBulkOutPosition > pHTTXContext->CurWritePosition + 0x6000)) && */
-				(pAd->DeQueueRunning[BulkOutPipeId] == FALSE) &&
-				(pHTTXContext->bCurWriting == FALSE))
-			{
-				RTMPDeQueuePacket(pAd, FALSE, BulkOutPipeId, MAX_TX_PROCESS);
-			}
-
-			RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL);
-			RTUSBKickBulkOut(pAd);
-		}
-	}
-
-
-	return;
-
-}
-
-
-static void rt2870_null_frame_complete_tasklet(unsigned long data)
-{
-	PRTMP_ADAPTER	pAd;
-	PTX_CONTEXT		pNullContext;
-	purbb_t			pUrb;
-	NTSTATUS		Status;
-	unsigned long	irqFlag;
-
-
-	pUrb			= (purbb_t)data;
-	pNullContext	= (PTX_CONTEXT)pUrb->context;
-	pAd 			= pNullContext->pAd;
-	Status 			= pUrb->status;
-
-	// Reset Null frame context flags
-	RTMP_IRQ_LOCK(&pAd->BulkOutLock[0], irqFlag);
-	pNullContext->IRPPending 	= FALSE;
-	pNullContext->InUse 		= FALSE;
-	pAd->BulkOutPending[0] = FALSE;
-	pAd->watchDogTxPendingCnt[0] = 0;
-
-	if (Status == USB_ST_NOERROR)
-	{
-		RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[0], irqFlag);
-
-		RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS);
-	}
-	else	// STATUS_OTHER
-	{
-		if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)))
-		{
-			DBGPRINT_RAW(RT_DEBUG_ERROR, ("Bulk Out Null Frame Failed, ReasonCode=%d!\n", Status));
-			RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET);
-			pAd->bulkResetPipeid = (MGMTPIPEIDX | BULKOUT_MGMT_RESET_FLAG);
-			RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[0], irqFlag);
-			RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT, NULL, 0);
-		}
-		else
-		{
-			RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[0], irqFlag);
-		}
-	}
-
-	// Always call Bulk routine, even reset bulk.
-	// The protectioon of rest bulk should be in BulkOut routine
-	RTUSBKickBulkOut(pAd);
-
-}
-
-
-static void rt2870_rts_frame_complete_tasklet(unsigned long data)
-{
-	PRTMP_ADAPTER	pAd;
-	PTX_CONTEXT		pRTSContext;
-	purbb_t			pUrb;
-	NTSTATUS		Status;
-	unsigned long	irqFlag;
-
-
-	pUrb		= (purbb_t)data;
-	pRTSContext	= (PTX_CONTEXT)pUrb->context;
-	pAd			= pRTSContext->pAd;
-	Status		= pUrb->status;
-
-	// Reset RTS frame context flags
-	RTMP_IRQ_LOCK(&pAd->BulkOutLock[0], irqFlag);
-	pRTSContext->IRPPending = FALSE;
-	pRTSContext->InUse		= FALSE;
-
-	if (Status == USB_ST_NOERROR)
-	{
-		RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[0], irqFlag);
-		RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS);
-	}
-	else	// STATUS_OTHER
-	{
-		if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)))
-		{
-			DBGPRINT_RAW(RT_DEBUG_ERROR, ("Bulk Out RTS Frame Failed\n"));
-			RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET);
-			pAd->bulkResetPipeid = (MGMTPIPEIDX | BULKOUT_MGMT_RESET_FLAG);
-			RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[0], irqFlag);
-			RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT, NULL, 0);
-		}
-		else
-		{
-			RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[0], irqFlag);
-		}
-	}
-
-	RTMP_SEM_LOCK(&pAd->BulkOutLock[pRTSContext->BulkOutPipeId]);
-	pAd->BulkOutPending[pRTSContext->BulkOutPipeId] = FALSE;
-	RTMP_SEM_UNLOCK(&pAd->BulkOutLock[pRTSContext->BulkOutPipeId]);
-
-	// Always call Bulk routine, even reset bulk.
-	// The protectioon of rest bulk should be in BulkOut routine
-	RTUSBKickBulkOut(pAd);
-
-}
-
-
-static void rt2870_pspoll_frame_complete_tasklet(unsigned long data)
-{
-	PRTMP_ADAPTER	pAd;
-	PTX_CONTEXT		pPsPollContext;
-	purbb_t			pUrb;
-	NTSTATUS		Status;
-
-
-	pUrb			= (purbb_t)data;
-	pPsPollContext	= (PTX_CONTEXT)pUrb->context;
-	pAd				= pPsPollContext->pAd;
-	Status			= pUrb->status;
-
-	// Reset PsPoll context flags
-	pPsPollContext->IRPPending	= FALSE;
-	pPsPollContext->InUse		= FALSE;
-	pAd->watchDogTxPendingCnt[0] = 0;
-
-	if (Status == USB_ST_NOERROR)
-	{
-		RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS);
-	}
-	else // STATUS_OTHER
-	{
-		if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)))
-		{
-			DBGPRINT_RAW(RT_DEBUG_ERROR, ("Bulk Out PSPoll Failed\n"));
-			RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET);
-			pAd->bulkResetPipeid = (MGMTPIPEIDX | BULKOUT_MGMT_RESET_FLAG);
-			RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT, NULL, 0);
-		}
-	}
-
-	RTMP_SEM_LOCK(&pAd->BulkOutLock[0]);
-	pAd->BulkOutPending[0] = FALSE;
-	RTMP_SEM_UNLOCK(&pAd->BulkOutLock[0]);
-
-	// Always call Bulk routine, even reset bulk.
-	// The protectioon of rest bulk should be in BulkOut routine
-	RTUSBKickBulkOut(pAd);
-
-}
-
-
-static void rt2870_dataout_complete_tasklet(unsigned long data)
-{
-	PRTMP_ADAPTER		pAd;
-	purbb_t				pUrb;
-	POS_COOKIE			pObj;
-	PHT_TX_CONTEXT		pHTTXContext;
-	UCHAR				BulkOutPipeId;
-	NTSTATUS			Status;
-	unsigned long		IrqFlags;
-
-
-	pUrb			= (purbb_t)data;
-	pHTTXContext	= (PHT_TX_CONTEXT)pUrb->context;
-	pAd				= pHTTXContext->pAd;
-	pObj 			= (POS_COOKIE) pAd->OS_Cookie;
-	Status			= pUrb->status;
-
-	// Store BulkOut PipeId
-	BulkOutPipeId = pHTTXContext->BulkOutPipeId;
-	pAd->BulkOutDataOneSecCount++;
-
-	//DBGPRINT(RT_DEBUG_LOUD, ("Done-B(%d):I=0x%lx, CWPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d!\n", BulkOutPipeId, in_interrupt(), pHTTXContext->CurWritePosition,
-	//		pHTTXContext->NextBulkOutPosition, pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad));
-
-	RTMP_IRQ_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-	pAd->BulkOutPending[BulkOutPipeId] = FALSE;
-	pHTTXContext->IRPPending = FALSE;
-	pAd->watchDogTxPendingCnt[BulkOutPipeId] = 0;
-
-	if (Status == USB_ST_NOERROR)
-	{
-		pAd->BulkOutComplete++;
-
-		RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-
-		pAd->Counters8023.GoodTransmits++;
-		//RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags);
-		FREE_HTTX_RING(pAd, BulkOutPipeId, pHTTXContext);
-		//RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags);
-
-
-	}
-	else	// STATUS_OTHER
-	{
-		PUCHAR	pBuf;
-
-		pAd->BulkOutCompleteOther++;
-
-		pBuf = &pHTTXContext->TransferBuffer->field.WirelessPacket[pHTTXContext->NextBulkOutPosition];
-
-		if (!RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS |
-									fRTMP_ADAPTER_HALT_IN_PROGRESS |
-									fRTMP_ADAPTER_NIC_NOT_EXIST |
-									fRTMP_ADAPTER_BULKOUT_RESET)))
-		{
-			RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET);
-			pAd->bulkResetPipeid = BulkOutPipeId;
-			pAd->bulkResetReq[BulkOutPipeId] = pAd->BulkOutReq;
-		}
-		RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-
-		DBGPRINT_RAW(RT_DEBUG_ERROR, ("BulkOutDataPacket failed: ReasonCode=%d!\n", Status));
-		DBGPRINT_RAW(RT_DEBUG_ERROR, ("\t>>BulkOut Req=0x%lx, Complete=0x%lx, Other=0x%lx\n", pAd->BulkOutReq, pAd->BulkOutComplete, pAd->BulkOutCompleteOther));
-		DBGPRINT_RAW(RT_DEBUG_ERROR, ("\t>>BulkOut Header:%x %x %x %x %x %x %x %x\n", pBuf[0], pBuf[1], pBuf[2], pBuf[3], pBuf[4], pBuf[5], pBuf[6], pBuf[7]));
-		//DBGPRINT_RAW(RT_DEBUG_ERROR, (">>BulkOutCompleteCancel=0x%x, BulkOutCompleteOther=0x%x\n", pAd->BulkOutCompleteCancel, pAd->BulkOutCompleteOther));
-
-	}
-
-	//
-	// bInUse = TRUE, means some process are filling TX data, after that must turn on bWaitingBulkOut
-	// bWaitingBulkOut = TRUE, means the TX data are waiting for bulk out.
-	//
-	//RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags);
-	if ((pHTTXContext->ENextBulkOutPosition != pHTTXContext->CurWritePosition) &&
-		(pHTTXContext->ENextBulkOutPosition != (pHTTXContext->CurWritePosition+8)) &&
-		!RTUSB_TEST_BULK_FLAG(pAd, (fRTUSB_BULK_OUT_DATA_FRAG << BulkOutPipeId)))
-	{
-		// Indicate There is data avaliable
-		RTUSB_SET_BULK_FLAG(pAd, (fRTUSB_BULK_OUT_DATA_NORMAL << BulkOutPipeId));
-	}
-	//RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags);
-
-	// Always call Bulk routine, even reset bulk.
-	// The protection of rest bulk should be in BulkOut routine
-	RTUSBKickBulkOut(pAd);
-}
-
-/* End of 2870_rtmp_init.c */
+#include "../../rt2870/common/2870_rtmp_init.c"
diff --git a/drivers/staging/rt3070/common/action.c b/drivers/staging/rt3070/common/action.c
index b8ae5363366..035fd803f61 100644
--- a/drivers/staging/rt3070/common/action.c
+++ b/drivers/staging/rt3070/common/action.c
@@ -1,1038 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-	action.c
-
-    Abstract:
-    Handle association related requests either from WSTA or from local MLME
-
-    Revision History:
-    Who         When          What
-    --------    ----------    ----------------------------------------------
-	Jan Lee		2006	  	created for rt2860
- */
-
-#include "../rt_config.h"
-#include "../action.h"
-
-
-static VOID ReservedAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-/*
-    ==========================================================================
-    Description:
-        association state machine init, including state transition and timer init
-    Parameters:
-        S - pointer to the association state machine
-    Note:
-        The state machine looks like the following
-
-                                    ASSOC_IDLE
-        MT2_MLME_DISASSOC_REQ    mlme_disassoc_req_action
-        MT2_PEER_DISASSOC_REQ    peer_disassoc_action
-        MT2_PEER_ASSOC_REQ       drop
-        MT2_PEER_REASSOC_REQ     drop
-        MT2_CLS3ERR              cls3err_action
-    ==========================================================================
- */
-VOID ActionStateMachineInit(
-    IN	PRTMP_ADAPTER	pAd,
-    IN  STATE_MACHINE *S,
-    OUT STATE_MACHINE_FUNC Trans[])
-{
-	StateMachineInit(S, (STATE_MACHINE_FUNC *)Trans, MAX_ACT_STATE, MAX_ACT_MSG, (STATE_MACHINE_FUNC)Drop, ACT_IDLE, ACT_MACHINE_BASE);
-
-	StateMachineSetAction(S, ACT_IDLE, MT2_PEER_SPECTRUM_CATE, (STATE_MACHINE_FUNC)PeerSpectrumAction);
-	StateMachineSetAction(S, ACT_IDLE, MT2_PEER_QOS_CATE, (STATE_MACHINE_FUNC)PeerQOSAction);
-
-	StateMachineSetAction(S, ACT_IDLE, MT2_PEER_DLS_CATE, (STATE_MACHINE_FUNC)ReservedAction);
-#ifdef QOS_DLS_SUPPORT
-		StateMachineSetAction(S, ACT_IDLE, MT2_PEER_DLS_CATE, (STATE_MACHINE_FUNC)PeerDLSAction);
-#endif // QOS_DLS_SUPPORT //
-
-#ifdef DOT11_N_SUPPORT
-	StateMachineSetAction(S, ACT_IDLE, MT2_PEER_BA_CATE, (STATE_MACHINE_FUNC)PeerBAAction);
-	StateMachineSetAction(S, ACT_IDLE, MT2_PEER_HT_CATE, (STATE_MACHINE_FUNC)PeerHTAction);
-	StateMachineSetAction(S, ACT_IDLE, MT2_MLME_ADD_BA_CATE, (STATE_MACHINE_FUNC)MlmeADDBAAction);
-	StateMachineSetAction(S, ACT_IDLE, MT2_MLME_ORI_DELBA_CATE, (STATE_MACHINE_FUNC)MlmeDELBAAction);
-	StateMachineSetAction(S, ACT_IDLE, MT2_MLME_REC_DELBA_CATE, (STATE_MACHINE_FUNC)MlmeDELBAAction);
-#endif // DOT11_N_SUPPORT //
-
-	StateMachineSetAction(S, ACT_IDLE, MT2_PEER_PUBLIC_CATE, (STATE_MACHINE_FUNC)PeerPublicAction);
-	StateMachineSetAction(S, ACT_IDLE, MT2_PEER_RM_CATE, (STATE_MACHINE_FUNC)PeerRMAction);
-
-	StateMachineSetAction(S, ACT_IDLE, MT2_MLME_QOS_CATE, (STATE_MACHINE_FUNC)MlmeQOSAction);
-	StateMachineSetAction(S, ACT_IDLE, MT2_MLME_DLS_CATE, (STATE_MACHINE_FUNC)MlmeDLSAction);
-	StateMachineSetAction(S, ACT_IDLE, MT2_ACT_INVALID, (STATE_MACHINE_FUNC)MlmeInvalidAction);
-}
-
-#ifdef DOT11_N_SUPPORT
-VOID MlmeADDBAAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-
-{
-	MLME_ADDBA_REQ_STRUCT *pInfo;
-	UCHAR           Addr[6];
-	PUCHAR         pOutBuffer = NULL;
-	NDIS_STATUS     NStatus;
-	ULONG		Idx;
-	FRAME_ADDBA_REQ  Frame;
-	ULONG		FrameLen;
-	BA_ORI_ENTRY			*pBAEntry = NULL;
-
-	pInfo = (MLME_ADDBA_REQ_STRUCT *)Elem->Msg;
-	NdisZeroMemory(&Frame, sizeof(FRAME_ADDBA_REQ));
-
-	if(MlmeAddBAReqSanity(pAd, Elem->Msg, Elem->MsgLen, Addr))
-	{
-		NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-		if(NStatus != NDIS_STATUS_SUCCESS)
-		{
-			DBGPRINT(RT_DEBUG_TRACE,("BA - MlmeADDBAAction() allocate memory failed \n"));
-			return;
-		}
-		// 1. find entry
-		Idx = pAd->MacTab.Content[pInfo->Wcid].BAOriWcidArray[pInfo->TID];
-		if (Idx == 0)
-		{
-			MlmeFreeMemory(pAd, pOutBuffer);
-			DBGPRINT(RT_DEBUG_ERROR,("BA - MlmeADDBAAction() can't find BAOriEntry \n"));
-			return;
-		}
-		else
-		{
-			pBAEntry =&pAd->BATable.BAOriEntry[Idx];
-		}
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			if (ADHOC_ON(pAd))
-				ActHeaderInit(pAd, &Frame.Hdr, pInfo->pAddr, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
-			else
-				ActHeaderInit(pAd, &Frame.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pInfo->pAddr);
-
-		}
-#endif // CONFIG_STA_SUPPORT //
-
-		Frame.Category = CATEGORY_BA;
-		Frame.Action = ADDBA_REQ;
-		Frame.BaParm.AMSDUSupported = 0;
-		Frame.BaParm.BAPolicy = IMMED_BA;
-		Frame.BaParm.TID = pInfo->TID;
-		Frame.BaParm.BufSize = pInfo->BaBufSize;
-		Frame.Token = pInfo->Token;
-		Frame.TimeOutValue = pInfo->TimeOutValue;
-		Frame.BaStartSeq.field.FragNum = 0;
-		Frame.BaStartSeq.field.StartSeq = pAd->MacTab.Content[pInfo->Wcid].TxSeq[pInfo->TID];
-
-		*(USHORT *)(&Frame.BaParm) = cpu2le16(*(USHORT *)(&Frame.BaParm));
-		Frame.TimeOutValue = cpu2le16(Frame.TimeOutValue);
-		Frame.BaStartSeq.word = cpu2le16(Frame.BaStartSeq.word);
-
-		MakeOutgoingFrame(pOutBuffer,		   &FrameLen,
-		              sizeof(FRAME_ADDBA_REQ), &Frame,
-		              END_OF_ARGS);
-		MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-		//MiniportDataMMRequest(pAd, MapUserPriorityToAccessCategory[pInfo->TID], pOutBuffer, FrameLen);
-		MlmeFreeMemory(pAd, pOutBuffer);
-
-		DBGPRINT(RT_DEBUG_TRACE, ("BA - Send ADDBA request. StartSeq = %x,  FrameLen = %ld. BufSize = %d\n", Frame.BaStartSeq.field.StartSeq, FrameLen, Frame.BaParm.BufSize));
-    }
-}
-
-/*
-    ==========================================================================
-    Description:
-        send DELBA and delete BaEntry if any
-    Parametrs:
-        Elem - MLME message MLME_DELBA_REQ_STRUCT
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID MlmeDELBAAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-	MLME_DELBA_REQ_STRUCT *pInfo;
-	PUCHAR         pOutBuffer = NULL;
-	PUCHAR		   pOutBuffer2 = NULL;
-	NDIS_STATUS     NStatus;
-	ULONG		Idx;
-	FRAME_DELBA_REQ  Frame;
-	ULONG		FrameLen;
-	FRAME_BAR	FrameBar;
-
-	pInfo = (MLME_DELBA_REQ_STRUCT *)Elem->Msg;
-	// must send back DELBA
-	NdisZeroMemory(&Frame, sizeof(FRAME_DELBA_REQ));
-	DBGPRINT(RT_DEBUG_TRACE, ("==> MlmeDELBAAction(), Initiator(%d) \n", pInfo->Initiator));
-
-	if(MlmeDelBAReqSanity(pAd, Elem->Msg, Elem->MsgLen))
-	{
-		NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-		if(NStatus != NDIS_STATUS_SUCCESS)
-		{
-			DBGPRINT(RT_DEBUG_ERROR,("BA - MlmeDELBAAction() allocate memory failed 1. \n"));
-			return;
-		}
-
-		NStatus = MlmeAllocateMemory(pAd, &pOutBuffer2);  //Get an unused nonpaged memory
-		if(NStatus != NDIS_STATUS_SUCCESS)
-		{
-			MlmeFreeMemory(pAd, pOutBuffer);
-			DBGPRINT(RT_DEBUG_ERROR, ("BA - MlmeDELBAAction() allocate memory failed 2. \n"));
-			return;
-		}
-
-		// SEND BAR (Send BAR to refresh peer reordering buffer.)
-		Idx = pAd->MacTab.Content[pInfo->Wcid].BAOriWcidArray[pInfo->TID];
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			BarHeaderInit(pAd, &FrameBar, pAd->MacTab.Content[pInfo->Wcid].Addr, pAd->CurrentAddress);
-#endif // CONFIG_STA_SUPPORT //
-
-		FrameBar.StartingSeq.field.FragNum = 0; // make sure sequence not clear in DEL funciton.
-		FrameBar.StartingSeq.field.StartSeq = pAd->MacTab.Content[pInfo->Wcid].TxSeq[pInfo->TID]; // make sure sequence not clear in DEL funciton.
-		FrameBar.BarControl.TID = pInfo->TID; // make sure sequence not clear in DEL funciton.
-		FrameBar.BarControl.ACKPolicy = IMMED_BA; // make sure sequence not clear in DEL funciton.
-		FrameBar.BarControl.Compressed = 1; // make sure sequence not clear in DEL funciton.
-		FrameBar.BarControl.MTID = 0; // make sure sequence not clear in DEL funciton.
-
-		MakeOutgoingFrame(pOutBuffer2,				&FrameLen,
-					  sizeof(FRAME_BAR),	  &FrameBar,
-					  END_OF_ARGS);
-		MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer2, FrameLen);
-		MlmeFreeMemory(pAd, pOutBuffer2);
-		DBGPRINT(RT_DEBUG_TRACE,("BA - MlmeDELBAAction() . Send BAR to refresh peer reordering buffer \n"));
-
-		// SEND DELBA FRAME
-		FrameLen = 0;
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			if (ADHOC_ON(pAd))
-				ActHeaderInit(pAd, &Frame.Hdr, pAd->MacTab.Content[pInfo->Wcid].Addr, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
-			else
-				ActHeaderInit(pAd, &Frame.Hdr,  pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->MacTab.Content[pInfo->Wcid].Addr);
-		}
-#endif // CONFIG_STA_SUPPORT //
-		Frame.Category = CATEGORY_BA;
-		Frame.Action = DELBA;
-		Frame.DelbaParm.Initiator = pInfo->Initiator;
-		Frame.DelbaParm.TID = pInfo->TID;
-		Frame.ReasonCode = 39; // Time Out
-		*(USHORT *)(&Frame.DelbaParm) = cpu2le16(*(USHORT *)(&Frame.DelbaParm));
-		Frame.ReasonCode = cpu2le16(Frame.ReasonCode);
-
-		MakeOutgoingFrame(pOutBuffer,               &FrameLen,
-		              sizeof(FRAME_DELBA_REQ),    &Frame,
-		              END_OF_ARGS);
-		MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-		MlmeFreeMemory(pAd, pOutBuffer);
-		DBGPRINT(RT_DEBUG_TRACE, ("BA - MlmeDELBAAction() . 3 DELBA sent. Initiator(%d)\n", pInfo->Initiator));
-    	}
-}
-#endif // DOT11_N_SUPPORT //
-
-VOID MlmeQOSAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-}
-
-VOID MlmeDLSAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-}
-
-VOID MlmeInvalidAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-	//PUCHAR		   pOutBuffer = NULL;
-	//Return the receiving frame except the MSB of category filed set to 1.  7.3.1.11
-}
-
-VOID PeerQOSAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-}
-
-#ifdef QOS_DLS_SUPPORT
-VOID PeerDLSAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR	Action = Elem->Msg[LENGTH_802_11+1];
-
-	switch(Action)
-	{
-		case ACTION_DLS_REQUEST:
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			PeerDlsReqAction(pAd, Elem);
-#endif // CONFIG_STA_SUPPORT //
-			break;
-
-		case ACTION_DLS_RESPONSE:
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			PeerDlsRspAction(pAd, Elem);
-#endif // CONFIG_STA_SUPPORT //
-			break;
-
-		case ACTION_DLS_TEARDOWN:
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			PeerDlsTearDownAction(pAd, Elem);
-#endif // CONFIG_STA_SUPPORT //
-			break;
-	}
-}
-#endif // QOS_DLS_SUPPORT //
-
-#ifdef DOT11_N_SUPPORT
-VOID PeerBAAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR	Action = Elem->Msg[LENGTH_802_11+1];
-
-	switch(Action)
-	{
-		case ADDBA_REQ:
-			PeerAddBAReqAction(pAd,Elem);
-			break;
-		case ADDBA_RESP:
-			PeerAddBARspAction(pAd,Elem);
-			break;
-		case DELBA:
-			PeerDelBAAction(pAd,Elem);
-			break;
-	}
-}
-
-
-#ifdef DOT11N_DRAFT3
-
-#ifdef CONFIG_STA_SUPPORT
-VOID StaPublicAction(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR Bss2040Coexist)
-{
-	BSS_2040_COEXIST_IE		BssCoexist;
-	MLME_SCAN_REQ_STRUCT			ScanReq;
-
-	BssCoexist.word = Bss2040Coexist;
-	// AP asks Station to return a 20/40 BSS Coexistence mgmt frame.  So we first starts a scan, then send back 20/40 BSS Coexistence mgmt frame
-	if ((BssCoexist.field.InfoReq == 1) && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_SCAN_2040)))
-	{
-		// Clear record first.  After scan , will update those bit and send back to transmiter.
-		pAd->CommonCfg.BSSCoexist2040.field.InfoReq = 1;
-		pAd->CommonCfg.BSSCoexist2040.field.Intolerant40 = 0;
-		pAd->CommonCfg.BSSCoexist2040.field.BSS20WidthReq = 0;
-		// Fill out stuff for scan request
-		ScanParmFill(pAd, &ScanReq, ZeroSsid, 0, BSS_ANY, SCAN_2040_BSS_COEXIST);
-		MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_SCAN_REQ, sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq);
-		pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_LIST_SCAN;
-	}
-}
-
-
-/*
-Description : Build Intolerant Channel Rerpot from Trigger event table.
-return : how many bytes copied.
-*/
-ULONG BuildIntolerantChannelRep(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    PUCHAR  pDest)
-{
-	ULONG			FrameLen = 0;
-	ULONG			ReadOffset = 0;
-	UCHAR			i;
-	UCHAR			LastRegClass = 0xff;
-	PUCHAR			pLen;
-
-	for ( i = 0;i < MAX_TRIGGER_EVENT;i++)
-	{
-		if (pAd->CommonCfg.TriggerEventTab.EventA[i].bValid == TRUE)
-		{
-			if (pAd->CommonCfg.TriggerEventTab.EventA[i].RegClass == LastRegClass)
-			{
-				*(pDest + ReadOffset) = (UCHAR)pAd->CommonCfg.TriggerEventTab.EventA[i].Channel;
-				*pLen++;
-				ReadOffset++;
-				FrameLen++;
-			}
-			else
-			{
-				*(pDest + ReadOffset) = IE_2040_BSS_INTOLERANT_REPORT;  // IE
-				*(pDest + ReadOffset + 1) = 2;	// Len = RegClass byte + channel byte.
-				pLen = pDest + ReadOffset + 1;
-				LastRegClass = pAd->CommonCfg.TriggerEventTab.EventA[i].RegClass;
-				*(pDest + ReadOffset + 2) = LastRegClass;	// Len = RegClass byte + channel byte.
-				*(pDest + ReadOffset + 3) = (UCHAR)pAd->CommonCfg.TriggerEventTab.EventA[i].Channel;
-				FrameLen += 4;
-				ReadOffset += 4;
-			}
-
-		}
-	}
-	return FrameLen;
-}
-
-
-/*
-Description : Send 20/40 BSS Coexistence Action frame If one trigger event is triggered.
-*/
-VOID Send2040CoexistAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    UCHAR  Wcid,
-	IN	BOOLEAN	bAddIntolerantCha)
-{
-	PUCHAR			pOutBuffer = NULL;
-	NDIS_STATUS 	NStatus;
-	FRAME_ACTION_HDR	Frame;
-	ULONG			FrameLen;
-	ULONG			IntolerantChaRepLen;
-
-	IntolerantChaRepLen = 0;
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-	if(NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("ACT - Send2040CoexistAction() allocate memory failed \n"));
-		return;
-	}
-	ActHeaderInit(pAd, &Frame.Hdr, pAd->MacTab.Content[Wcid].Addr, pAd->CommonCfg.Bssid);
-	Frame.Category = CATEGORY_PUBLIC;
-	Frame.Action = ACTION_BSS_2040_COEXIST;
-
-	MakeOutgoingFrame(pOutBuffer,				&FrameLen,
-				  sizeof(FRAME_ACTION_HDR),	  &Frame,
-				  END_OF_ARGS);
-
-	*(pOutBuffer + FrameLen) = pAd->CommonCfg.BSSCoexist2040.word;
-	FrameLen++;
-
-	if (bAddIntolerantCha == TRUE)
-		IntolerantChaRepLen = BuildIntolerantChannelRep(pAd, pOutBuffer + FrameLen);
-
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen + IntolerantChaRepLen);
-	DBGPRINT(RT_DEBUG_ERROR,("ACT - Send2040CoexistAction( BSSCoexist2040 = 0x%x )  \n", pAd->CommonCfg.BSSCoexist2040.word));
-
-}
-
-
-/*
-	==========================================================================
-	Description:
-	After scan, Update 20/40 BSS Coexistence IE and send out.
-	According to 802.11n D3.03 11.14.10
-
-	Parameters:
-	==========================================================================
- */
-VOID Update2040CoexistFrameAndNotify(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    UCHAR  Wcid,
-	IN	BOOLEAN	bAddIntolerantCha)
-{
-	BSS_2040_COEXIST_IE	OldValue;
-
-	OldValue.word = pAd->CommonCfg.BSSCoexist2040.word;
-	if ((pAd->CommonCfg.TriggerEventTab.EventANo > 0) || (pAd->CommonCfg.TriggerEventTab.EventBCountDown > 0))
-		pAd->CommonCfg.BSSCoexist2040.field.BSS20WidthReq = 1;
-
-	// Need to check !!!!
-	// How STA will set Intolerant40 if implementation dependent. Now we don't set this bit first.!!!!!
-	// So Only check BSS20WidthReq change.
-	if (OldValue.field.BSS20WidthReq != pAd->CommonCfg.BSSCoexist2040.field.BSS20WidthReq)
-	{
-		Send2040CoexistAction(pAd, Wcid, bAddIntolerantCha);
-	}
-}
-#endif // CONFIG_STA_SUPPORT //
-
-
-BOOLEAN ChannelSwitchSanityCheck(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    UCHAR  Wcid,
-	IN    UCHAR  NewChannel,
-	IN    UCHAR  Secondary)
-{
-	UCHAR		i;
-
-	if (Wcid >= MAX_LEN_OF_MAC_TABLE)
-		return FALSE;
-
-	if ((NewChannel > 7) && (Secondary == 1))
-		return FALSE;
-
-	if ((NewChannel < 5) && (Secondary == 3))
-		return FALSE;
-
-	// 0. Check if new channel is in the channellist.
-	for (i = 0;i < pAd->ChannelListNum;i++)
-	{
-		if (pAd->ChannelList[i].Channel == NewChannel)
-		{
-			break;
-		}
-	}
-
-	if (i == pAd->ChannelListNum)
-		return FALSE;
-
-	return TRUE;
-}
-
-
-VOID ChannelSwitchAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    UCHAR  Wcid,
-	IN    UCHAR  NewChannel,
-	IN    UCHAR  Secondary)
-{
-	UCHAR		BBPValue = 0;
-	ULONG		MACValue;
-
-	DBGPRINT(RT_DEBUG_TRACE,("SPECTRUM - ChannelSwitchAction(NewChannel = %d , Secondary = %d)  \n", NewChannel, Secondary));
-
-	if (ChannelSwitchSanityCheck(pAd, Wcid, NewChannel, Secondary) == FALSE)
-		return;
-
-	// 1.  Switches to BW = 20.
-	if (Secondary == 0)
-	{
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
-		BBPValue&= (~0x18);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
-		if (pAd->MACVersion == 0x28600100)
-		{
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x16);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x08);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x11);
-			DBGPRINT(RT_DEBUG_TRACE, ("!!!rt2860C !!! \n" ));
-		}
-		pAd->CommonCfg.BBPCurrentBW = BW_20;
-		pAd->CommonCfg.Channel = NewChannel;
-		pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel;
-		AsicSwitchChannel(pAd, pAd->CommonCfg.Channel,FALSE);
-		AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-		pAd->MacTab.Content[Wcid].HTPhyMode.field.BW = 0;
-		DBGPRINT(RT_DEBUG_TRACE, ("!!!20MHz   !!! \n" ));
-	}
-	// 1.  Switches to BW = 40 And Station supports BW = 40.
-	else if (((Secondary == 1) || (Secondary == 3)) && (pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth == 1))
-	{
-		pAd->CommonCfg.Channel = NewChannel;
-
-		if (Secondary == 1)
-		{
-			// Secondary above.
-			pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel + 2;
-			RTMP_IO_READ32(pAd, TX_BAND_CFG, &MACValue);
-			MACValue &= 0xfe;
-			RTMP_IO_WRITE32(pAd, TX_BAND_CFG, MACValue);
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
-			BBPValue&= (~0x18);
-			BBPValue|= (0x10);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPValue);
-			BBPValue&= (~0x20);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPValue);
-			DBGPRINT(RT_DEBUG_TRACE, ("!!!40MHz Lower LINK UP !!! Control Channel at Below. Central = %d \n", pAd->CommonCfg.CentralChannel ));
-		}
-		else
-		{
-			// Secondary below.
-			pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel - 2;
-			RTMP_IO_READ32(pAd, TX_BAND_CFG, &MACValue);
-			MACValue &= 0xfe;
-			MACValue |= 0x1;
-			RTMP_IO_WRITE32(pAd, TX_BAND_CFG, MACValue);
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
-			BBPValue&= (~0x18);
-			BBPValue|= (0x10);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPValue);
-			BBPValue&= (~0x20);
-			BBPValue|= (0x20);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPValue);
-			DBGPRINT(RT_DEBUG_TRACE, ("!!!40MHz Upper LINK UP !!! Control Channel at UpperCentral = %d \n", pAd->CommonCfg.CentralChannel ));
-		}
-		pAd->CommonCfg.BBPCurrentBW = BW_40;
-		AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
-		AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
-		pAd->MacTab.Content[Wcid].HTPhyMode.field.BW = 1;
-	}
-}
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
-
-VOID PeerPublicAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-#ifdef DOT11N_DRAFT3
-	UCHAR	Action = Elem->Msg[LENGTH_802_11+1];
-#endif // DOT11N_DRAFT3 //
-
-	if (Elem->Wcid >= MAX_LEN_OF_MAC_TABLE)
-		return;
-
-#ifdef DOT11N_DRAFT3
-	switch(Action)
-	{
-		case ACTION_BSS_2040_COEXIST:	// Format defined in IEEE 7.4.7a.1 in 11n Draf3.03
-			{
-				//UCHAR	BssCoexist;
-				BSS_2040_COEXIST_ELEMENT		*pCoexistInfo;
-				BSS_2040_COEXIST_IE 			*pBssCoexistIe;
-				BSS_2040_INTOLERANT_CH_REPORT	*pIntolerantReport = NULL;
-
-				if (Elem->MsgLen <= (LENGTH_802_11 + sizeof(BSS_2040_COEXIST_ELEMENT)) )
-				{
-					DBGPRINT(RT_DEBUG_ERROR, ("ACTION - 20/40 BSS Coexistence Management Frame length too short! len = %ld!\n", Elem->MsgLen));
-					break;
-				}
-				DBGPRINT(RT_DEBUG_TRACE, ("ACTION - 20/40 BSS Coexistence Management action----> \n"));
-				hex_dump("CoexistenceMgmtFrame", Elem->Msg, Elem->MsgLen);
-
-
-				pCoexistInfo = (BSS_2040_COEXIST_ELEMENT *) &Elem->Msg[LENGTH_802_11+2];
-				//hex_dump("CoexistInfo", (PUCHAR)pCoexistInfo, sizeof(BSS_2040_COEXIST_ELEMENT));
-				if (Elem->MsgLen >= (LENGTH_802_11 + sizeof(BSS_2040_COEXIST_ELEMENT) + sizeof(BSS_2040_INTOLERANT_CH_REPORT)))
-				{
-					pIntolerantReport = (BSS_2040_INTOLERANT_CH_REPORT *)((PUCHAR)pCoexistInfo + sizeof(BSS_2040_COEXIST_ELEMENT));
-				}
-				//hex_dump("IntolerantReport ", (PUCHAR)pIntolerantReport, sizeof(BSS_2040_INTOLERANT_CH_REPORT));
-
-				pBssCoexistIe = (BSS_2040_COEXIST_IE *)(&pCoexistInfo->BssCoexistIe);
-
-#ifdef CONFIG_STA_SUPPORT
-				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				{
-					if (INFRA_ON(pAd))
-					{
-						StaPublicAction(pAd, pCoexistInfo);
-					}
-				}
-#endif // CONFIG_STA_SUPPORT //
-
-			}
-			break;
-	}
-
-#endif // DOT11N_DRAFT3 //
-
-}
-
-
-static VOID ReservedAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR Category;
-
-	if (Elem->MsgLen <= LENGTH_802_11)
-	{
-		return;
-	}
-
-	Category = Elem->Msg[LENGTH_802_11];
-	DBGPRINT(RT_DEBUG_TRACE,("Rcv reserved category(%d) Action Frame\n", Category));
-	hex_dump("Reserved Action Frame", &Elem->Msg[0], Elem->MsgLen);
-}
-
-VOID PeerRMAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-
-{
-	return;
-}
-
-#ifdef DOT11_N_SUPPORT
-static VOID respond_ht_information_exchange_action(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	PUCHAR			pOutBuffer = NULL;
-	NDIS_STATUS		NStatus;
-	ULONG			FrameLen;
-	FRAME_HT_INFO	HTINFOframe, *pFrame;
-	UCHAR   		*pAddr;
-
-
-	// 2. Always send back ADDBA Response
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);	 //Get an unused nonpaged memory
-
-	if (NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_TRACE,("ACTION - respond_ht_information_exchange_action() allocate memory failed \n"));
-		return;
-	}
-
-	// get RA
-	pFrame = (FRAME_HT_INFO *) &Elem->Msg[0];
-	pAddr = pFrame->Hdr.Addr2;
-
-	NdisZeroMemory(&HTINFOframe, sizeof(FRAME_HT_INFO));
-	// 2-1. Prepare ADDBA Response frame.
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if (ADHOC_ON(pAd))
-			ActHeaderInit(pAd, &HTINFOframe.Hdr, pAddr, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
-		else
-			ActHeaderInit(pAd, &HTINFOframe.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAddr);
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	HTINFOframe.Category = CATEGORY_HT;
-	HTINFOframe.Action = HT_INFO_EXCHANGE;
-	HTINFOframe.HT_Info.Request = 0;
-	HTINFOframe.HT_Info.Forty_MHz_Intolerant = pAd->CommonCfg.HtCapability.HtCapInfo.Forty_Mhz_Intolerant;
-	HTINFOframe.HT_Info.STA_Channel_Width	 = pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth;
-
-	MakeOutgoingFrame(pOutBuffer,					&FrameLen,
-					  sizeof(FRAME_HT_INFO),	&HTINFOframe,
-					  END_OF_ARGS);
-
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-}
-
-
-#ifdef DOT11N_DRAFT3
-VOID SendNotifyBWActionFrame(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR  Wcid,
-	IN UCHAR apidx)
-{
-	PUCHAR			pOutBuffer = NULL;
-	NDIS_STATUS 	NStatus;
-	FRAME_ACTION_HDR	Frame;
-	ULONG			FrameLen;
-	PUCHAR			pAddr1;
-
-
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-	if(NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("ACT - SendNotifyBWAction() allocate memory failed \n"));
-		return;
-	}
-
-	if (Wcid == MCAST_WCID)
-		pAddr1 = &BROADCAST_ADDR[0];
-	else
-		pAddr1 = pAd->MacTab.Content[Wcid].Addr;
-	ActHeaderInit(pAd, &Frame.Hdr, pAddr1, pAd->ApCfg.MBSSID[apidx].Bssid, pAd->ApCfg.MBSSID[apidx].Bssid);
-
-	Frame.Category = CATEGORY_HT;
-	Frame.Action = NOTIFY_BW_ACTION;
-
-	MakeOutgoingFrame(pOutBuffer,				&FrameLen,
-				  sizeof(FRAME_ACTION_HDR),	  &Frame,
-				  END_OF_ARGS);
-
-	*(pOutBuffer + FrameLen) = pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth;
-	FrameLen++;
-
-
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-	DBGPRINT(RT_DEBUG_TRACE,("ACT - SendNotifyBWAction(NotifyBW= %d)!\n", pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth));
-
-}
-#endif // DOT11N_DRAFT3 //
-
-
-VOID PeerHTAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR	Action = Elem->Msg[LENGTH_802_11+1];
-
-	if (Elem->Wcid >= MAX_LEN_OF_MAC_TABLE)
-		return;
-
-	switch(Action)
-	{
-		case NOTIFY_BW_ACTION:
-			DBGPRINT(RT_DEBUG_TRACE,("ACTION - HT Notify Channel bandwidth action----> \n"));
-#ifdef CONFIG_STA_SUPPORT
-			if(pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE)
-			{
-				// Note, this is to patch DIR-1353 AP. When the AP set to Wep, it will use legacy mode. But AP still keeps
-				// sending BW_Notify Action frame, and cause us to linkup and linkdown.
-				// In legacy mode, don't need to parse HT action frame.
-				DBGPRINT(RT_DEBUG_TRACE,("ACTION -Ignore HT Notify Channel BW when link as legacy mode. BW = %d---> \n",
-								Elem->Msg[LENGTH_802_11+2] ));
-				break;
-			}
-#endif // CONFIG_STA_SUPPORT //
-
-			if (Elem->Msg[LENGTH_802_11+2] == 0)	// 7.4.8.2. if value is 1, keep the same as supported channel bandwidth.
-				pAd->MacTab.Content[Elem->Wcid].HTPhyMode.field.BW = 0;
-
-			break;
-
-		case SMPS_ACTION:
-			// 7.3.1.25
- 			DBGPRINT(RT_DEBUG_TRACE,("ACTION - SMPS action----> \n"));
-			if (((Elem->Msg[LENGTH_802_11+2]&0x1) == 0))
-			{
-				pAd->MacTab.Content[Elem->Wcid].MmpsMode = MMPS_ENABLE;
-			}
-			else if (((Elem->Msg[LENGTH_802_11+2]&0x2) == 0))
-			{
-				pAd->MacTab.Content[Elem->Wcid].MmpsMode = MMPS_STATIC;
-			}
-			else
-			{
-				pAd->MacTab.Content[Elem->Wcid].MmpsMode = MMPS_DYNAMIC;
-			}
-
-			DBGPRINT(RT_DEBUG_TRACE,("Aid(%d) MIMO PS = %d\n", Elem->Wcid, pAd->MacTab.Content[Elem->Wcid].MmpsMode));
-			// rt2860c : add something for smps change.
-			break;
-
-		case SETPCO_ACTION:
-			break;
-
-		case MIMO_CHA_MEASURE_ACTION:
-			break;
-
-		case HT_INFO_EXCHANGE:
-			{
-				HT_INFORMATION_OCTET	*pHT_info;
-
-				pHT_info = (HT_INFORMATION_OCTET *) &Elem->Msg[LENGTH_802_11+2];
-    				// 7.4.8.10
-    				DBGPRINT(RT_DEBUG_TRACE,("ACTION - HT Information Exchange action----> \n"));
-    				if (pHT_info->Request)
-    				{
-    					respond_ht_information_exchange_action(pAd, Elem);
-    				}
-			}
-    			break;
-	}
-}
-
-
-/*
-	==========================================================================
-	Description:
-		Retry sending ADDBA Reqest.
-
-	IRQL = DISPATCH_LEVEL
-
-	Parametrs:
-	p8023Header: if this is already 802.3 format, p8023Header is NULL
-
-	Return	: TRUE if put into rx reordering buffer, shouldn't indicaterxhere.
-				FALSE , then continue indicaterx at this moment.
-	==========================================================================
- */
-VOID ORIBATimerTimeout(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	MAC_TABLE_ENTRY	*pEntry;
-	INT			i, total;
-//	FRAME_BAR			FrameBar;
-//	ULONG			FrameLen;
-//	NDIS_STATUS 	NStatus;
-//	PUCHAR			pOutBuffer = NULL;
-//	USHORT			Sequence;
-	UCHAR			TID;
-
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-	total = pAd->MacTab.Size * NUM_OF_TID;
-
-	for (i = 1; ((i <MAX_LEN_OF_BA_ORI_TABLE) && (total > 0)) ; i++)
-	{
-		if  (pAd->BATable.BAOriEntry[i].ORI_BA_Status == Originator_Done)
-		{
-			pEntry = &pAd->MacTab.Content[pAd->BATable.BAOriEntry[i].Wcid];
-			TID = pAd->BATable.BAOriEntry[i].TID;
-
-			ASSERT(pAd->BATable.BAOriEntry[i].Wcid < MAX_LEN_OF_MAC_TABLE);
-		}
-		total --;
-	}
-}
-
-
-VOID SendRefreshBAR(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MAC_TABLE_ENTRY	*pEntry)
-{
-	FRAME_BAR		FrameBar;
-	ULONG			FrameLen;
-	NDIS_STATUS 	NStatus;
-	PUCHAR			pOutBuffer = NULL;
-	USHORT			Sequence;
-	UCHAR			i, TID;
-	USHORT			idx;
-	BA_ORI_ENTRY	*pBAEntry;
-
-	for (i = 0; i <NUM_OF_TID; i++)
-	{
-		idx = pEntry->BAOriWcidArray[i];
-		if (idx == 0)
-		{
-			continue;
-		}
-		pBAEntry = &pAd->BATable.BAOriEntry[idx];
-
-		if  (pBAEntry->ORI_BA_Status == Originator_Done)
-		{
-			TID = pBAEntry->TID;
-
-			ASSERT(pBAEntry->Wcid < MAX_LEN_OF_MAC_TABLE);
-
-			NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-			if(NStatus != NDIS_STATUS_SUCCESS)
-			{
-				DBGPRINT(RT_DEBUG_ERROR,("BA - MlmeADDBAAction() allocate memory failed \n"));
-				return;
-			}
-
-			Sequence = pEntry->TxSeq[TID];
-
-
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				BarHeaderInit(pAd, &FrameBar, pEntry->Addr, pAd->CurrentAddress);
-#endif // CONFIG_STA_SUPPORT //
-
-			FrameBar.StartingSeq.field.FragNum = 0; // make sure sequence not clear in DEL function.
-			FrameBar.StartingSeq.field.StartSeq = Sequence; // make sure sequence not clear in DEL funciton.
-			FrameBar.BarControl.TID = TID; // make sure sequence not clear in DEL funciton.
-
-			MakeOutgoingFrame(pOutBuffer,				&FrameLen,
-							  sizeof(FRAME_BAR),	  &FrameBar,
-							  END_OF_ARGS);
-			//if (!(CLIENT_STATUS_TEST_FLAG(pEntry, fCLIENT_STATUS_RALINK_CHIPSET)))
-			if (1)	// Now we always send BAR.
-			{
-				//MiniportMMRequestUnlock(pAd, 0, pOutBuffer, FrameLen);
-				MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-				//MiniportDataMMRequest(pAd, MapUserPriorityToAccessCategory[TID], pOutBuffer, FrameLen);
-			}
-			MlmeFreeMemory(pAd, pOutBuffer);
-		}
-	}
-}
-#endif // DOT11_N_SUPPORT //
-
-VOID ActHeaderInit(
-    IN	PRTMP_ADAPTER	pAd,
-    IN OUT PHEADER_802_11 pHdr80211,
-    IN PUCHAR Addr1,
-    IN PUCHAR Addr2,
-    IN PUCHAR Addr3)
-{
-    NdisZeroMemory(pHdr80211, sizeof(HEADER_802_11));
-    pHdr80211->FC.Type = BTYPE_MGMT;
-    pHdr80211->FC.SubType = SUBTYPE_ACTION;
-
-    COPY_MAC_ADDR(pHdr80211->Addr1, Addr1);
-	COPY_MAC_ADDR(pHdr80211->Addr2, Addr2);
-    COPY_MAC_ADDR(pHdr80211->Addr3, Addr3);
-}
-
-VOID BarHeaderInit(
-	IN	PRTMP_ADAPTER	pAd,
-	IN OUT PFRAME_BAR pCntlBar,
-	IN PUCHAR pDA,
-	IN PUCHAR pSA)
-{
-//	USHORT	Duration;
-
-	NdisZeroMemory(pCntlBar, sizeof(FRAME_BAR));
-	pCntlBar->FC.Type = BTYPE_CNTL;
-	pCntlBar->FC.SubType = SUBTYPE_BLOCK_ACK_REQ;
-   	pCntlBar->BarControl.MTID = 0;
-	pCntlBar->BarControl.Compressed = 1;
-	pCntlBar->BarControl.ACKPolicy = 0;
-
-
-	pCntlBar->Duration = 16 + RTMPCalcDuration(pAd, RATE_1, sizeof(FRAME_BA));
-
-	COPY_MAC_ADDR(pCntlBar->Addr1, pDA);
-	COPY_MAC_ADDR(pCntlBar->Addr2, pSA);
-}
-
-
-/*
-	==========================================================================
-	Description:
-		Insert Category and action code into the action frame.
-
-	Parametrs:
-		1. frame buffer pointer.
-		2. frame length.
-		3. category code of the frame.
-		4. action code of the frame.
-
-	Return	: None.
-	==========================================================================
- */
-VOID InsertActField(
-	IN PRTMP_ADAPTER pAd,
-	OUT PUCHAR pFrameBuf,
-	OUT PULONG pFrameLen,
-	IN UINT8 Category,
-	IN UINT8 ActCode)
-{
-	ULONG TempLen;
-
-	MakeOutgoingFrame(	pFrameBuf,		&TempLen,
-						1,				&Category,
-						1,				&ActCode,
-						END_OF_ARGS);
-
-	*pFrameLen = *pFrameLen + TempLen;
-
-	return;
-}
+#include "../../rt2870/common/action.c"
diff --git a/drivers/staging/rt3070/common/ba_action.c b/drivers/staging/rt3070/common/ba_action.c
index 17e1f87d98d..2d638ea8c87 100644
--- a/drivers/staging/rt3070/common/ba_action.c
+++ b/drivers/staging/rt3070/common/ba_action.c
@@ -1,1810 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-
-#ifdef DOT11_N_SUPPORT
-
-#include "../rt_config.h"
-
-
-
-#define BA_ORI_INIT_SEQ		(pEntry->TxSeq[TID]) //1			// inital sequence number of BA session
-
-#define ORI_SESSION_MAX_RETRY	8
-#define ORI_BA_SESSION_TIMEOUT	(2000)	// ms
-#define REC_BA_SESSION_IDLE_TIMEOUT	(1000)	// ms
-
-#define REORDERING_PACKET_TIMEOUT		((100 * HZ)/1000)	// system ticks -- 100 ms
-#define MAX_REORDERING_PACKET_TIMEOUT	((3000 * HZ)/1000)	// system ticks -- 100 ms
-
-#define RESET_RCV_SEQ		(0xFFFF)
-
-static void ba_mpdu_blk_free(PRTMP_ADAPTER pAd, struct reordering_mpdu *mpdu_blk);
-
-
-BA_ORI_ENTRY *BATableAllocOriEntry(
-								  IN  PRTMP_ADAPTER   pAd,
-								  OUT USHORT          *Idx);
-
-BA_REC_ENTRY *BATableAllocRecEntry(
-								  IN  PRTMP_ADAPTER   pAd,
-								  OUT USHORT          *Idx);
-
-VOID BAOriSessionSetupTimeout(
-    IN PVOID SystemSpecific1,
-    IN PVOID FunctionContext,
-    IN PVOID SystemSpecific2,
-    IN PVOID SystemSpecific3);
-
-VOID BARecSessionIdleTimeout(
-    IN PVOID SystemSpecific1,
-    IN PVOID FunctionContext,
-    IN PVOID SystemSpecific2,
-    IN PVOID SystemSpecific3);
-
-
-BUILD_TIMER_FUNCTION(BAOriSessionSetupTimeout);
-BUILD_TIMER_FUNCTION(BARecSessionIdleTimeout);
-
-#define ANNOUNCE_REORDERING_PACKET(_pAd, _mpdu_blk)	\
-			Announce_Reordering_Packet(_pAd, _mpdu_blk);
-
-VOID BA_MaxWinSizeReasign(
-	IN PRTMP_ADAPTER	pAd,
-	IN MAC_TABLE_ENTRY  *pEntryPeer,
-	OUT UCHAR			*pWinSize)
-{
-	UCHAR MaxSize;
-
-
-	if (pAd->MACVersion >= RALINK_2883_VERSION) // 3*3
-	{
-		if (pAd->MACVersion >= RALINK_3070_VERSION)
-		{
-			if (pEntryPeer->WepStatus != Ndis802_11EncryptionDisabled)
-				MaxSize = 7; // for non-open mode
-			else
-				MaxSize = 13;
-		}
-		else
-			MaxSize = 31;
-	}
-	else if (pAd->MACVersion >= RALINK_2880E_VERSION) // 2880 e
-	{
-		if (pEntryPeer->WepStatus != Ndis802_11EncryptionDisabled)
-			MaxSize = 7; // for non-open mode
-		else
-			MaxSize = 13;
-	}
-	else
-		MaxSize = 7;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("ba> Win Size = %d, Max Size = %d\n",
-			*pWinSize, MaxSize));
-
-	if ((*pWinSize) > MaxSize)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("ba> reassign max win size from %d to %d\n",
-				*pWinSize, MaxSize));
-
-		*pWinSize = MaxSize;
-	}
-}
-
-void Announce_Reordering_Packet(IN PRTMP_ADAPTER			pAd,
-								IN struct reordering_mpdu	*mpdu)
-{
-	PNDIS_PACKET    pPacket;
-
-	pPacket = mpdu->pPacket;
-
-	if (mpdu->bAMSDU)
-	{
-		ASSERT(0);
-		BA_Reorder_AMSDU_Annnounce(pAd, pPacket);
-	}
-	else
-	{
-		//
-		// pass this 802.3 packet to upper layer or forward this packet to WM directly
-		//
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pPacket, RTMP_GET_PACKET_IF(pPacket));
-#endif // CONFIG_STA_SUPPORT //
-	}
-}
-
-/*
- * Insert a reordering mpdu into sorted linked list by sequence no.
- */
-BOOLEAN ba_reordering_mpdu_insertsorted(struct reordering_list *list, struct reordering_mpdu *mpdu)
-{
-
-	struct reordering_mpdu **ppScan = &list->next;
-
-	while (*ppScan != NULL)
-	{
-		if (SEQ_SMALLER((*ppScan)->Sequence, mpdu->Sequence, MAXSEQ))
-		{
-			ppScan = &(*ppScan)->next;
-		}
-		else if ((*ppScan)->Sequence == mpdu->Sequence)
-		{
-			/* give up this duplicated frame */
-			return(FALSE);
-		}
-		else
-		{
-			/* find position */
-			break;
-		}
-	}
-
-	mpdu->next = *ppScan;
-	*ppScan = mpdu;
-	list->qlen++;
-	return TRUE;
-}
-
-
-/*
- * caller lock critical section if necessary
- */
-static inline void ba_enqueue(struct reordering_list *list, struct reordering_mpdu *mpdu_blk)
-{
-	list->qlen++;
-	mpdu_blk->next = list->next;
-	list->next = mpdu_blk;
-}
-
-/*
- * caller lock critical section if necessary
- */
-static inline struct reordering_mpdu * ba_dequeue(struct reordering_list *list)
-{
-	struct reordering_mpdu *mpdu_blk = NULL;
-
-	ASSERT(list);
-
-		if (list->qlen)
-		{
-			list->qlen--;
-			mpdu_blk = list->next;
-			if (mpdu_blk)
-			{
-				list->next = mpdu_blk->next;
-				mpdu_blk->next = NULL;
-			}
-		}
-	return mpdu_blk;
-}
-
-
-static inline struct reordering_mpdu  *ba_reordering_mpdu_dequeue(struct reordering_list *list)
-{
-	return(ba_dequeue(list));
-}
-
-
-static inline struct reordering_mpdu  *ba_reordering_mpdu_probe(struct reordering_list *list)
-	{
-	ASSERT(list);
-
-		return(list->next);
-	}
-
-
-/*
- * free all resource for reordering mechanism
- */
-void ba_reordering_resource_release(PRTMP_ADAPTER pAd)
-{
-	BA_TABLE        *Tab;
-	PBA_REC_ENTRY   pBAEntry;
-	struct reordering_mpdu *mpdu_blk;
-	int i;
-
-	Tab = &pAd->BATable;
-
-	/* I.  release all pending reordering packet */
-	NdisAcquireSpinLock(&pAd->BATabLock);
-	for (i = 0; i < MAX_LEN_OF_BA_REC_TABLE; i++)
-	{
-		pBAEntry = &Tab->BARecEntry[i];
-		if (pBAEntry->REC_BA_Status != Recipient_NONE)
-		{
-			while ((mpdu_blk = ba_reordering_mpdu_dequeue(&pBAEntry->list)))
-			{
-				ASSERT(mpdu_blk->pPacket);
-				RELEASE_NDIS_PACKET(pAd, mpdu_blk->pPacket, NDIS_STATUS_FAILURE);
-				ba_mpdu_blk_free(pAd, mpdu_blk);
-			}
-		}
-	}
-	NdisReleaseSpinLock(&pAd->BATabLock);
-
-	ASSERT(pBAEntry->list.qlen == 0);
-	/* II. free memory of reordering mpdu table */
-	NdisAcquireSpinLock(&pAd->mpdu_blk_pool.lock);
-	os_free_mem(pAd, pAd->mpdu_blk_pool.mem);
-	NdisReleaseSpinLock(&pAd->mpdu_blk_pool.lock);
-}
-
-
-
-/*
- * Allocate all resource for reordering mechanism
- */
-BOOLEAN ba_reordering_resource_init(PRTMP_ADAPTER pAd, int num)
-{
-	int     i;
-	PUCHAR  mem;
-	struct reordering_mpdu *mpdu_blk;
-	struct reordering_list *freelist;
-
-	/* allocate spinlock */
-	NdisAllocateSpinLock(&pAd->mpdu_blk_pool.lock);
-
-	/* initialize freelist */
-	freelist = &pAd->mpdu_blk_pool.freelist;
-	freelist->next = NULL;
-	freelist->qlen = 0;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Allocate %d memory for BA reordering\n", (UINT32)(num*sizeof(struct reordering_mpdu))));
-
-	/* allocate number of mpdu_blk memory */
-	os_alloc_mem(pAd, (PUCHAR *)&mem, (num*sizeof(struct reordering_mpdu)));
-
-	pAd->mpdu_blk_pool.mem = mem;
-
-	if (mem == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("Can't Allocate Memory for BA Reordering\n"));
-		return(FALSE);
-	}
-
-	/* build mpdu_blk free list */
-	for (i=0; i<num; i++)
-	{
-		/* get mpdu_blk */
-		mpdu_blk = (struct reordering_mpdu *) mem;
-		/* initial mpdu_blk */
-		NdisZeroMemory(mpdu_blk, sizeof(struct reordering_mpdu));
-		/* next mpdu_blk */
-		mem += sizeof(struct reordering_mpdu);
-		/* insert mpdu_blk into freelist */
-		ba_enqueue(freelist, mpdu_blk);
-	}
-
-	return(TRUE);
-}
-
-//static int blk_count=0; // sample take off, no use
-
-static struct reordering_mpdu *ba_mpdu_blk_alloc(PRTMP_ADAPTER pAd)
-{
-	struct reordering_mpdu *mpdu_blk;
-
-	NdisAcquireSpinLock(&pAd->mpdu_blk_pool.lock);
-	mpdu_blk = ba_dequeue(&pAd->mpdu_blk_pool.freelist);
-	if (mpdu_blk)
-	{
-//		blk_count++;
-		/* reset mpdu_blk */
-		NdisZeroMemory(mpdu_blk, sizeof(struct reordering_mpdu));
-	}
-	NdisReleaseSpinLock(&pAd->mpdu_blk_pool.lock);
-	return mpdu_blk;
-}
-
-static void ba_mpdu_blk_free(PRTMP_ADAPTER pAd, struct reordering_mpdu *mpdu_blk)
-{
-	ASSERT(mpdu_blk);
-
-	NdisAcquireSpinLock(&pAd->mpdu_blk_pool.lock);
-//	blk_count--;
-	ba_enqueue(&pAd->mpdu_blk_pool.freelist, mpdu_blk);
-	NdisReleaseSpinLock(&pAd->mpdu_blk_pool.lock);
-}
-
-
-static USHORT ba_indicate_reordering_mpdus_in_order(
-												   IN PRTMP_ADAPTER    pAd,
-												   IN PBA_REC_ENTRY    pBAEntry,
-												   IN USHORT           StartSeq)
-{
-	struct reordering_mpdu *mpdu_blk;
-	USHORT  LastIndSeq = RESET_RCV_SEQ;
-
-	NdisAcquireSpinLock(&pBAEntry->RxReRingLock);
-
-	while ((mpdu_blk = ba_reordering_mpdu_probe(&pBAEntry->list)))
-		{
-			/* find in-order frame */
-		if (!SEQ_STEPONE(mpdu_blk->Sequence, StartSeq, MAXSEQ))
-			{
-				break;
-			}
-			/* dequeue in-order frame from reodering list */
-			mpdu_blk = ba_reordering_mpdu_dequeue(&pBAEntry->list);
-			/* pass this frame up */
-		ANNOUNCE_REORDERING_PACKET(pAd, mpdu_blk);
-		/* move to next sequence */
-			StartSeq = mpdu_blk->Sequence;
-		LastIndSeq = StartSeq;
-		/* free mpdu_blk */
-			ba_mpdu_blk_free(pAd, mpdu_blk);
-	}
-
-	NdisReleaseSpinLock(&pBAEntry->RxReRingLock);
-
-	/* update last indicated sequence */
-	return LastIndSeq;
-}
-
-static void ba_indicate_reordering_mpdus_le_seq(
-											   IN PRTMP_ADAPTER    pAd,
-											   IN PBA_REC_ENTRY    pBAEntry,
-											   IN USHORT           Sequence)
-{
-	struct reordering_mpdu *mpdu_blk;
-
-	NdisAcquireSpinLock(&pBAEntry->RxReRingLock);
-	while ((mpdu_blk = ba_reordering_mpdu_probe(&pBAEntry->list)))
-		{
-			/* find in-order frame */
-		if ((mpdu_blk->Sequence == Sequence) || SEQ_SMALLER(mpdu_blk->Sequence, Sequence, MAXSEQ))
-		{
-			/* dequeue in-order frame from reodering list */
-			mpdu_blk = ba_reordering_mpdu_dequeue(&pBAEntry->list);
-			/* pass this frame up */
-			ANNOUNCE_REORDERING_PACKET(pAd, mpdu_blk);
-			/* free mpdu_blk */
-			ba_mpdu_blk_free(pAd, mpdu_blk);
-		}
-		else
-			{
-				break;
-			}
-	}
-	NdisReleaseSpinLock(&pBAEntry->RxReRingLock);
-}
-
-
-static void ba_refresh_reordering_mpdus(
-									   IN PRTMP_ADAPTER    pAd,
-									   PBA_REC_ENTRY       pBAEntry)
-{
-	struct reordering_mpdu *mpdu_blk;
-
-	NdisAcquireSpinLock(&pBAEntry->RxReRingLock);
-
-			/* dequeue in-order frame from reodering list */
-	while ((mpdu_blk = ba_reordering_mpdu_dequeue(&pBAEntry->list)))
-	{
-			/* pass this frame up */
-		ANNOUNCE_REORDERING_PACKET(pAd, mpdu_blk);
-
-		pBAEntry->LastIndSeq = mpdu_blk->Sequence;
-			ba_mpdu_blk_free(pAd, mpdu_blk);
-
-		/* update last indicated sequence */
-	}
-	ASSERT(pBAEntry->list.qlen == 0);
-	pBAEntry->LastIndSeq = RESET_RCV_SEQ;
-	NdisReleaseSpinLock(&pBAEntry->RxReRingLock);
-}
-
-
-//static
-void ba_flush_reordering_timeout_mpdus(
-									IN PRTMP_ADAPTER    pAd,
-									IN PBA_REC_ENTRY    pBAEntry,
-									IN ULONG            Now32)
-
-{
-	USHORT Sequence;
-
-//	if ((RTMP_TIME_AFTER((unsigned long)Now32, (unsigned long)(pBAEntry->LastIndSeqAtTimer+REORDERING_PACKET_TIMEOUT)) &&
-//		 (pBAEntry->list.qlen > ((pBAEntry->BAWinSize*7)/8))) //||
-//		(RTMP_TIME_AFTER((unsigned long)Now32, (unsigned long)(pBAEntry->LastIndSeqAtTimer+(10*REORDERING_PACKET_TIMEOUT))) &&
-//		 (pBAEntry->list.qlen > (pBAEntry->BAWinSize/8)))
-	if (RTMP_TIME_AFTER((unsigned long)Now32, (unsigned long)(pBAEntry->LastIndSeqAtTimer+(MAX_REORDERING_PACKET_TIMEOUT/6)))
-		 &&(pBAEntry->list.qlen > 1)
-		)
-	{
-		DBGPRINT(RT_DEBUG_TRACE,("timeout[%d] (%08lx-%08lx = %d > %d): %x, flush all!\n ", pBAEntry->list.qlen, Now32, (pBAEntry->LastIndSeqAtTimer),
-			   (int)((long) Now32 - (long)(pBAEntry->LastIndSeqAtTimer)), MAX_REORDERING_PACKET_TIMEOUT,
-			   pBAEntry->LastIndSeq));
-		ba_refresh_reordering_mpdus(pAd, pBAEntry);
-		pBAEntry->LastIndSeqAtTimer = Now32;
-	}
-	else
-	if (RTMP_TIME_AFTER((unsigned long)Now32, (unsigned long)(pBAEntry->LastIndSeqAtTimer+(REORDERING_PACKET_TIMEOUT)))
-		&& (pBAEntry->list.qlen > 0)
-	   )
-		{
-//		printk("timeout[%d] (%lx-%lx = %d > %d): %x, ", pBAEntry->list.qlen, Now32, (pBAEntry->LastIndSeqAtTimer),
-//			   (int)((long) Now32 - (long)(pBAEntry->LastIndSeqAtTimer)), REORDERING_PACKET_TIMEOUT,
-//			   pBAEntry->LastIndSeq);
-    		//
-		// force LastIndSeq to shift to LastIndSeq+1
-    		//
-    		Sequence = (pBAEntry->LastIndSeq+1) & MAXSEQ;
-    		ba_indicate_reordering_mpdus_le_seq(pAd, pBAEntry, Sequence);
-    		pBAEntry->LastIndSeqAtTimer = Now32;
-			pBAEntry->LastIndSeq = Sequence;
-    		//
-    		// indicate in-order mpdus
-    		//
-    		Sequence = ba_indicate_reordering_mpdus_in_order(pAd, pBAEntry, Sequence);
-    		if (Sequence != RESET_RCV_SEQ)
-    		{
-    			pBAEntry->LastIndSeq = Sequence;
-    		}
-
-		//printk("%x, flush one!\n", pBAEntry->LastIndSeq);
-
-	}
-}
-
-
-/*
- * generate ADDBA request to
- * set up BA agreement
- */
-VOID BAOriSessionSetUp(
-					  IN PRTMP_ADAPTER    pAd,
-					  IN MAC_TABLE_ENTRY  *pEntry,
-					  IN UCHAR            TID,
-					  IN USHORT           TimeOut,
-					  IN ULONG            DelayTime,
-					  IN BOOLEAN          isForced)
-
-{
-	//MLME_ADDBA_REQ_STRUCT	AddbaReq;
-	BA_ORI_ENTRY            *pBAEntry = NULL;
-	USHORT                  Idx;
-	BOOLEAN                 Cancelled;
-
-	if ((pAd->CommonCfg.BACapability.field.AutoBA != TRUE)  &&  (isForced == FALSE))
-		return;
-
-	// if this entry is limited to use legacy tx mode, it doesn't generate BA.
-	if (RTMPStaFixedTxMode(pAd, pEntry) != FIXED_TXMODE_HT)
-		return;
-
-	if ((pEntry->BADeclineBitmap & (1<<TID)) && (isForced == FALSE))
-	{
-		// try again after 3 secs
-		DelayTime = 3000;
-//		printk("DeCline BA from Peer\n");
-//		return;
-	}
-
-
-	Idx = pEntry->BAOriWcidArray[TID];
-	if (Idx == 0)
-	{
-		// allocate a BA session
-		pBAEntry = BATableAllocOriEntry(pAd, &Idx);
-		if (pBAEntry == NULL)
-		{
-			DBGPRINT(RT_DEBUG_TRACE,("ADDBA - MlmeADDBAAction() allocate BA session failed \n"));
-			return;
-		}
-	}
-	else
-	{
-		pBAEntry =&pAd->BATable.BAOriEntry[Idx];
-	}
-
-	if (pBAEntry->ORI_BA_Status >= Originator_WaitRes)
-	{
-		return;
-	}
-
-	pEntry->BAOriWcidArray[TID] = Idx;
-
-	// Initialize BA session
-	pBAEntry->ORI_BA_Status = Originator_WaitRes;
-	pBAEntry->Wcid = pEntry->Aid;
-	pBAEntry->BAWinSize = pAd->CommonCfg.BACapability.field.RxBAWinLimit;
-	pBAEntry->Sequence = BA_ORI_INIT_SEQ;
-	pBAEntry->Token = 1;	// (2008-01-21) Jan Lee recommends it - this token can't be 0
-	pBAEntry->TID = TID;
-	pBAEntry->TimeOutValue = TimeOut;
-	pBAEntry->pAdapter = pAd;
-
-	DBGPRINT(RT_DEBUG_TRACE,("Send AddBA to %02x:%02x:%02x:%02x:%02x:%02x Tid:%d isForced:%d Wcid:%d\n"
-		,pEntry->Addr[0],pEntry->Addr[1],pEntry->Addr[2]
-		,pEntry->Addr[3],pEntry->Addr[4],pEntry->Addr[5]
-		,TID,isForced,pEntry->Aid));
-
-	if (!(pEntry->TXBAbitmap & (1<<TID)))
-	{
-		RTMPInitTimer(pAd, &pBAEntry->ORIBATimer, GET_TIMER_FUNCTION(BAOriSessionSetupTimeout), pBAEntry, FALSE);
-	}
-	else
-		RTMPCancelTimer(&pBAEntry->ORIBATimer, &Cancelled);
-
-	// set timer to send ADDBA request
-	RTMPSetTimer(&pBAEntry->ORIBATimer, DelayTime);
-}
-
-VOID BAOriSessionAdd(
-			IN PRTMP_ADAPTER    pAd,
-					IN MAC_TABLE_ENTRY  *pEntry,
-			IN PFRAME_ADDBA_RSP pFrame)
-{
-	BA_ORI_ENTRY  *pBAEntry = NULL;
-	BOOLEAN       Cancelled;
-	UCHAR         TID;
-	USHORT        Idx;
-	PUCHAR          pOutBuffer2 = NULL;
-	NDIS_STATUS     NStatus;
-	ULONG           FrameLen;
-	FRAME_BAR       FrameBar;
-
-	TID = pFrame->BaParm.TID;
-	Idx = pEntry->BAOriWcidArray[TID];
-	pBAEntry =&pAd->BATable.BAOriEntry[Idx];
-
-	// Start fill in parameters.
-	if ((Idx !=0) && (pBAEntry->TID == TID) && (pBAEntry->ORI_BA_Status == Originator_WaitRes))
-	{
-		pBAEntry->BAWinSize = min(pBAEntry->BAWinSize, ((UCHAR)pFrame->BaParm.BufSize));
-		BA_MaxWinSizeReasign(pAd, pEntry, &pBAEntry->BAWinSize);
-
-		pBAEntry->TimeOutValue = pFrame->TimeOutValue;
-		pBAEntry->ORI_BA_Status = Originator_Done;
-		// reset sequence number
-		pBAEntry->Sequence = BA_ORI_INIT_SEQ;
-		// Set Bitmap flag.
-		pEntry->TXBAbitmap |= (1<<TID);
-				RTMPCancelTimer(&pBAEntry->ORIBATimer, &Cancelled);
-
-		pBAEntry->ORIBATimer.TimerValue = 0;	//pFrame->TimeOutValue;
-
-		DBGPRINT(RT_DEBUG_TRACE,("%s : TXBAbitmap = %x, BAWinSize = %d, TimeOut = %ld\n", __FUNCTION__, pEntry->TXBAbitmap,
-								 pBAEntry->BAWinSize, pBAEntry->ORIBATimer.TimerValue));
-
-		// SEND BAR ;
-		NStatus = MlmeAllocateMemory(pAd, &pOutBuffer2);  //Get an unused nonpaged memory
-		if (NStatus != NDIS_STATUS_SUCCESS)
-		{
-			DBGPRINT(RT_DEBUG_TRACE,("BA - BAOriSessionAdd() allocate memory failed \n"));
-			return;
-		}
-
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			BarHeaderInit(pAd, &FrameBar, pAd->MacTab.Content[pBAEntry->Wcid].Addr, pAd->CurrentAddress);
-#endif // CONFIG_STA_SUPPORT //
-
-		FrameBar.StartingSeq.field.FragNum = 0;	// make sure sequence not clear in DEL function.
-		FrameBar.StartingSeq.field.StartSeq = pBAEntry->Sequence; // make sure sequence not clear in DEL funciton.
-		FrameBar.BarControl.TID = pBAEntry->TID; // make sure sequence not clear in DEL funciton.
-		MakeOutgoingFrame(pOutBuffer2,              &FrameLen,
-						  sizeof(FRAME_BAR),      &FrameBar,
-					  END_OF_ARGS);
-		MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer2, FrameLen);
-		MlmeFreeMemory(pAd, pOutBuffer2);
-
-
-		if (pBAEntry->ORIBATimer.TimerValue)
-			RTMPSetTimer(&pBAEntry->ORIBATimer, pBAEntry->ORIBATimer.TimerValue); // in mSec
-	}
-}
-
-BOOLEAN BARecSessionAdd(
-					   IN PRTMP_ADAPTER    pAd,
-					   IN MAC_TABLE_ENTRY  *pEntry,
-					   IN PFRAME_ADDBA_REQ pFrame)
-{
-	BA_REC_ENTRY            *pBAEntry = NULL;
-	BOOLEAN                 Status = TRUE;
-	BOOLEAN                 Cancelled;
-	USHORT                  Idx;
-	UCHAR                   TID;
-	UCHAR                   BAWinSize;
-	//UINT32                  Value;
-	//UINT                    offset;
-
-
-	ASSERT(pEntry);
-
-	// find TID
-	TID = pFrame->BaParm.TID;
-
-	BAWinSize = min(((UCHAR)pFrame->BaParm.BufSize), (UCHAR)pAd->CommonCfg.BACapability.field.RxBAWinLimit);
-
-	// Intel patch
-	if (BAWinSize == 0)
-	{
-		BAWinSize = 64;
-	}
-
-	Idx = pEntry->BARecWcidArray[TID];
-
-
-	if (Idx == 0)
-	{
-		pBAEntry = BATableAllocRecEntry(pAd, &Idx);
-	}
-	else
-	{
-		pBAEntry = &pAd->BATable.BARecEntry[Idx];
-		// flush all pending reordering mpdus
-		ba_refresh_reordering_mpdus(pAd, pBAEntry);
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE,("%s(%ld): Idx = %d, BAWinSize(req %d) = %d\n", __FUNCTION__, pAd->BATable.numAsRecipient, Idx,
-							 pFrame->BaParm.BufSize, BAWinSize));
-
-	// Start fill in parameters.
-	if (pBAEntry != NULL)
-	{
-		ASSERT(pBAEntry->list.qlen == 0);
-
-		pBAEntry->REC_BA_Status = Recipient_HandleRes;
-		pBAEntry->BAWinSize = BAWinSize;
-		pBAEntry->Wcid = pEntry->Aid;
-		pBAEntry->TID = TID;
-		pBAEntry->TimeOutValue = pFrame->TimeOutValue;
-		pBAEntry->REC_BA_Status = Recipient_Accept;
-		// initial sequence number
-		pBAEntry->LastIndSeq = RESET_RCV_SEQ; //pFrame->BaStartSeq.field.StartSeq;
-
-		printk("Start Seq = %08x\n",  pFrame->BaStartSeq.field.StartSeq);
-
-		if (pEntry->RXBAbitmap & (1<<TID))
-		{
-			RTMPCancelTimer(&pBAEntry->RECBATimer, &Cancelled);
-		}
-		else
-		{
-			RTMPInitTimer(pAd, &pBAEntry->RECBATimer, GET_TIMER_FUNCTION(BARecSessionIdleTimeout), pBAEntry, TRUE);
-		}
-
-		// Set Bitmap flag.
-		pEntry->RXBAbitmap |= (1<<TID);
-		pEntry->BARecWcidArray[TID] = Idx;
-
-		pEntry->BADeclineBitmap &= ~(1<<TID);
-
-		// Set BA session mask in WCID table.
-		RT28XX_ADD_BA_SESSION_TO_ASIC(pAd, pEntry->Aid, TID);
-
-		DBGPRINT(RT_DEBUG_TRACE,("MACEntry[%d]RXBAbitmap = 0x%x. BARecWcidArray=%d\n",
-				pEntry->Aid, pEntry->RXBAbitmap, pEntry->BARecWcidArray[TID]));
-	}
-	else
-	{
-		Status = FALSE;
-		DBGPRINT(RT_DEBUG_TRACE,("Can't Accept ADDBA for %02x:%02x:%02x:%02x:%02x:%02x TID = %d\n",
-				PRINT_MAC(pEntry->Addr), TID));
-	}
-	return(Status);
-}
-
-
-BA_REC_ENTRY *BATableAllocRecEntry(
-								  IN  PRTMP_ADAPTER   pAd,
-								  OUT USHORT          *Idx)
-{
-	int             i;
-	BA_REC_ENTRY    *pBAEntry = NULL;
-
-
-	NdisAcquireSpinLock(&pAd->BATabLock);
-
-	if (pAd->BATable.numAsRecipient >= MAX_BARECI_SESSION)
-	{
-		printk("BA Recipeint Session (%ld) > %d\n", pAd->BATable.numAsRecipient,
-			MAX_BARECI_SESSION);
-		goto done;
-	}
-
-	// reserve idx 0 to identify BAWcidArray[TID] as empty
-	for (i=1; i < MAX_LEN_OF_BA_REC_TABLE; i++)
-	{
-		pBAEntry =&pAd->BATable.BARecEntry[i];
-		if ((pBAEntry->REC_BA_Status == Recipient_NONE))
-		{
-			// get one
-			pAd->BATable.numAsRecipient++;
-			pBAEntry->REC_BA_Status = Recipient_USED;
-			*Idx = i;
-			break;
-		}
-	}
-
-done:
-	NdisReleaseSpinLock(&pAd->BATabLock);
-	return pBAEntry;
-}
-
-BA_ORI_ENTRY *BATableAllocOriEntry(
-								  IN  PRTMP_ADAPTER   pAd,
-								  OUT USHORT          *Idx)
-{
-	int             i;
-	BA_ORI_ENTRY    *pBAEntry = NULL;
-
-	NdisAcquireSpinLock(&pAd->BATabLock);
-
-	if (pAd->BATable.numAsOriginator >= (MAX_LEN_OF_BA_ORI_TABLE))
-	{
-		goto done;
-	}
-
-	// reserve idx 0 to identify BAWcidArray[TID] as empty
-	for (i=1; i<MAX_LEN_OF_BA_ORI_TABLE; i++)
-	{
-		pBAEntry =&pAd->BATable.BAOriEntry[i];
-		if ((pBAEntry->ORI_BA_Status == Originator_NONE))
-		{
-			// get one
-			pAd->BATable.numAsOriginator++;
-			pBAEntry->ORI_BA_Status = Originator_USED;
-			pBAEntry->pAdapter = pAd;
-			*Idx = i;
-			break;
-		}
-	}
-
-done:
-	NdisReleaseSpinLock(&pAd->BATabLock);
-	return pBAEntry;
-}
-
-
-VOID BATableFreeOriEntry(
-						IN  PRTMP_ADAPTER   pAd,
-						IN  ULONG           Idx)
-{
-	BA_ORI_ENTRY    *pBAEntry = NULL;
-	MAC_TABLE_ENTRY *pEntry;
-
-
-	if ((Idx == 0) || (Idx >= MAX_LEN_OF_BA_ORI_TABLE))
-		return;
-
-	pBAEntry =&pAd->BATable.BAOriEntry[Idx];
-
-	if (pBAEntry->ORI_BA_Status != Originator_NONE)
-	{
-		pEntry = &pAd->MacTab.Content[pBAEntry->Wcid];
-		pEntry->BAOriWcidArray[pBAEntry->TID] = 0;
-
-
-		NdisAcquireSpinLock(&pAd->BATabLock);
-		if (pBAEntry->ORI_BA_Status == Originator_Done)
-		{
-		 	pEntry->TXBAbitmap &= (~(1<<(pBAEntry->TID) ));
-			DBGPRINT(RT_DEBUG_TRACE, ("BATableFreeOriEntry numAsOriginator= %ld\n", pAd->BATable.numAsRecipient));
-			// Erase Bitmap flag.
-		}
-
-		ASSERT(pAd->BATable.numAsOriginator != 0);
-
-		pAd->BATable.numAsOriginator -= 1;
-
-		pBAEntry->ORI_BA_Status = Originator_NONE;
-		pBAEntry->Token = 0;
-		NdisReleaseSpinLock(&pAd->BATabLock);
-	}
-}
-
-
-VOID BATableFreeRecEntry(
-						IN  PRTMP_ADAPTER   pAd,
-						IN  ULONG           Idx)
-{
-	BA_REC_ENTRY    *pBAEntry = NULL;
-	MAC_TABLE_ENTRY *pEntry;
-
-
-	if ((Idx == 0) || (Idx >= MAX_LEN_OF_BA_REC_TABLE))
-		return;
-
-	pBAEntry =&pAd->BATable.BARecEntry[Idx];
-
-	if (pBAEntry->REC_BA_Status != Recipient_NONE)
-	{
-		pEntry = &pAd->MacTab.Content[pBAEntry->Wcid];
-		pEntry->BARecWcidArray[pBAEntry->TID] = 0;
-
-		NdisAcquireSpinLock(&pAd->BATabLock);
-
-		ASSERT(pAd->BATable.numAsRecipient != 0);
-
-		pAd->BATable.numAsRecipient -= 1;
-
-		pBAEntry->REC_BA_Status = Recipient_NONE;
-		NdisReleaseSpinLock(&pAd->BATabLock);
-	}
-}
-
-
-VOID BAOriSessionTearDown(
-						 IN OUT  PRTMP_ADAPTER   pAd,
-						 IN      UCHAR           Wcid,
-						 IN      UCHAR           TID,
-						 IN      BOOLEAN         bPassive,
-						 IN      BOOLEAN         bForceSend)
-{
-	ULONG           Idx = 0;
-	BA_ORI_ENTRY    *pBAEntry;
-	BOOLEAN         Cancelled;
-
-	if (Wcid >= MAX_LEN_OF_MAC_TABLE)
-	{
-		return;
-	}
-
-	//
-	// Locate corresponding BA Originator Entry in BA Table with the (pAddr,TID).
-	//
-	Idx = pAd->MacTab.Content[Wcid].BAOriWcidArray[TID];
-	if ((Idx == 0) || (Idx >= MAX_LEN_OF_BA_ORI_TABLE))
-	{
-		if (bForceSend == TRUE)
-		{
-			// force send specified TID DelBA
-			MLME_DELBA_REQ_STRUCT   DelbaReq;
-			MLME_QUEUE_ELEM *Elem = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);
-
-			NdisZeroMemory(&DelbaReq, sizeof(DelbaReq));
-			NdisZeroMemory(Elem, sizeof(MLME_QUEUE_ELEM));
-
-			COPY_MAC_ADDR(DelbaReq.Addr, pAd->MacTab.Content[Wcid].Addr);
-			DelbaReq.Wcid = Wcid;
-			DelbaReq.TID = TID;
-			DelbaReq.Initiator = ORIGINATOR;
-#if 1
-			Elem->MsgLen  = sizeof(DelbaReq);
-			NdisMoveMemory(Elem->Msg, &DelbaReq, sizeof(DelbaReq));
-			MlmeDELBAAction(pAd, Elem);
-			kfree(Elem);
-#else
-			MlmeEnqueue(pAd, ACTION_STATE_MACHINE, MT2_MLME_ORI_DELBA_CATE, sizeof(MLME_DELBA_REQ_STRUCT), (PVOID)&DelbaReq);
-			RT28XX_MLME_HANDLER(pAd);
-#endif
-		}
-
-		return;
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE,("%s===>Wcid=%d.TID=%d \n", __FUNCTION__, Wcid, TID));
-
-	pBAEntry = &pAd->BATable.BAOriEntry[Idx];
-	DBGPRINT(RT_DEBUG_TRACE,("\t===>Idx = %ld, Wcid=%d.TID=%d, ORI_BA_Status = %d \n", Idx, Wcid, TID, pBAEntry->ORI_BA_Status));
-	//
-	// Prepare DelBA action frame and send to the peer.
-	//
-	if ((bPassive == FALSE) && (TID == pBAEntry->TID) && (pBAEntry->ORI_BA_Status == Originator_Done))
-	{
-		MLME_DELBA_REQ_STRUCT   DelbaReq;
-		MLME_QUEUE_ELEM *Elem = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);
-
-		NdisZeroMemory(&DelbaReq, sizeof(DelbaReq));
-		NdisZeroMemory(Elem, sizeof(MLME_QUEUE_ELEM));
-
-		COPY_MAC_ADDR(DelbaReq.Addr, pAd->MacTab.Content[Wcid].Addr);
-		DelbaReq.Wcid = Wcid;
-		DelbaReq.TID = pBAEntry->TID;
-		DelbaReq.Initiator = ORIGINATOR;
-#if 1
-		Elem->MsgLen  = sizeof(DelbaReq);
-		NdisMoveMemory(Elem->Msg, &DelbaReq, sizeof(DelbaReq));
-		MlmeDELBAAction(pAd, Elem);
-		kfree(Elem);
-#else
-		MlmeEnqueue(pAd, ACTION_STATE_MACHINE, MT2_MLME_ORI_DELBA_CATE, sizeof(MLME_DELBA_REQ_STRUCT), (PVOID)&DelbaReq);
-		RT28XX_MLME_HANDLER(pAd);
-#endif
-	}
-	RTMPCancelTimer(&pBAEntry->ORIBATimer, &Cancelled);
-	BATableFreeOriEntry(pAd, Idx);
-
-	if (bPassive)
-	{
-		//BAOriSessionSetUp(pAd, &pAd->MacTab.Content[Wcid], TID, 0, 10000, TRUE);
-	}
-}
-
-VOID BARecSessionTearDown(
-						 IN OUT  PRTMP_ADAPTER   pAd,
-						 IN      UCHAR           Wcid,
-						 IN      UCHAR           TID,
-						 IN      BOOLEAN         bPassive)
-{
-	ULONG           Idx = 0;
-	BA_REC_ENTRY    *pBAEntry;
-
-	if (Wcid >= MAX_LEN_OF_MAC_TABLE)
-	{
-		return;
-	}
-
-	//
-	//  Locate corresponding BA Originator Entry in BA Table with the (pAddr,TID).
-	//
-	Idx = pAd->MacTab.Content[Wcid].BARecWcidArray[TID];
-	if (Idx == 0)
-		return;
-
-	DBGPRINT(RT_DEBUG_TRACE,("%s===>Wcid=%d.TID=%d \n", __FUNCTION__, Wcid, TID));
-
-
-	pBAEntry = &pAd->BATable.BARecEntry[Idx];
-	DBGPRINT(RT_DEBUG_TRACE,("\t===>Idx = %ld, Wcid=%d.TID=%d, REC_BA_Status = %d \n", Idx, Wcid, TID, pBAEntry->REC_BA_Status));
-	//
-	// Prepare DelBA action frame and send to the peer.
-	//
-	if ((TID == pBAEntry->TID) && (pBAEntry->REC_BA_Status == Recipient_Accept))
-	{
-		MLME_DELBA_REQ_STRUCT   DelbaReq;
-		BOOLEAN 				Cancelled;
-		MLME_QUEUE_ELEM *Elem = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);
-		//ULONG   offset;
-		//UINT32  VALUE;
-
-		RTMPCancelTimer(&pBAEntry->RECBATimer, &Cancelled);
-
-		//
-		// 1. Send DELBA Action Frame
-		//
-		if (bPassive == FALSE)
-		{
-			NdisZeroMemory(&DelbaReq, sizeof(DelbaReq));
-			NdisZeroMemory(Elem, sizeof(MLME_QUEUE_ELEM));
-
-			COPY_MAC_ADDR(DelbaReq.Addr, pAd->MacTab.Content[Wcid].Addr);
-			DelbaReq.Wcid = Wcid;
-			DelbaReq.TID = TID;
-			DelbaReq.Initiator = RECIPIENT;
-#if 1
-			Elem->MsgLen  = sizeof(DelbaReq);
-			NdisMoveMemory(Elem->Msg, &DelbaReq, sizeof(DelbaReq));
-			MlmeDELBAAction(pAd, Elem);
-			kfree(Elem);
-#else
-			MlmeEnqueue(pAd, ACTION_STATE_MACHINE, MT2_MLME_ORI_DELBA_CATE, sizeof(MLME_DELBA_REQ_STRUCT), (PVOID)&DelbaReq);
-			RT28XX_MLME_HANDLER(pAd);
-#endif
-		}
-
-
-		//
-		// 2. Free resource of BA session
-		//
-		// flush all pending reordering mpdus
-		ba_refresh_reordering_mpdus(pAd, pBAEntry);
-
-		NdisAcquireSpinLock(&pAd->BATabLock);
-
-		// Erase Bitmap flag.
-		pBAEntry->LastIndSeq = RESET_RCV_SEQ;
-		pBAEntry->BAWinSize = 0;
-		// Erase Bitmap flag at software mactable
-		pAd->MacTab.Content[Wcid].RXBAbitmap &= (~(1<<(pBAEntry->TID)));
-		pAd->MacTab.Content[Wcid].BARecWcidArray[TID] = 0;
-
-		RT28XX_DEL_BA_SESSION_FROM_ASIC(pAd, Wcid, TID);
-
-		NdisReleaseSpinLock(&pAd->BATabLock);
-
-	}
-
-	BATableFreeRecEntry(pAd, Idx);
-}
-
-VOID BASessionTearDownALL(
-						 IN OUT  PRTMP_ADAPTER pAd,
-						 IN      UCHAR Wcid)
-{
-	int i;
-
-	for (i=0; i<NUM_OF_TID; i++)
-	{
-		BAOriSessionTearDown(pAd, Wcid, i, FALSE, FALSE);
-		BARecSessionTearDown(pAd, Wcid, i, FALSE);
-	}
-}
-
-
-/*
-	==========================================================================
-	Description:
-		Retry sending ADDBA Reqest.
-
-	IRQL = DISPATCH_LEVEL
-
-	Parametrs:
-	p8023Header: if this is already 802.3 format, p8023Header is NULL
-
-	Return	: TRUE if put into rx reordering buffer, shouldn't indicaterxhere.
-				FALSE , then continue indicaterx at this moment.
-	==========================================================================
- */
-VOID BAOriSessionSetupTimeout(
-    IN PVOID SystemSpecific1,
-    IN PVOID FunctionContext,
-    IN PVOID SystemSpecific2,
-    IN PVOID SystemSpecific3)
-{
-	BA_ORI_ENTRY    *pBAEntry = (BA_ORI_ENTRY *)FunctionContext;
-	MAC_TABLE_ENTRY *pEntry;
-	PRTMP_ADAPTER   pAd;
-
-	if (pBAEntry == NULL)
-		return;
-
-	pAd = pBAEntry->pAdapter;
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// Do nothing if monitor mode is on
-		if (MONITOR_ON(pAd))
-			return;
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef RALINK_ATE
-	// Nothing to do in ATE mode.
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-	pEntry = &pAd->MacTab.Content[pBAEntry->Wcid];
-
-	if ((pBAEntry->ORI_BA_Status == Originator_WaitRes) && (pBAEntry->Token < ORI_SESSION_MAX_RETRY))
-	{
-		MLME_ADDBA_REQ_STRUCT    AddbaReq;
-
-		NdisZeroMemory(&AddbaReq, sizeof(AddbaReq));
-		COPY_MAC_ADDR(AddbaReq.pAddr, pEntry->Addr);
-		AddbaReq.Wcid = (UCHAR)(pEntry->Aid);
-		AddbaReq.TID = pBAEntry->TID;
-		AddbaReq.BaBufSize = pAd->CommonCfg.BACapability.field.RxBAWinLimit;
-		AddbaReq.TimeOutValue = 0;
-		AddbaReq.Token = pBAEntry->Token;
-		MlmeEnqueue(pAd, ACTION_STATE_MACHINE, MT2_MLME_ADD_BA_CATE, sizeof(MLME_ADDBA_REQ_STRUCT), (PVOID)&AddbaReq);
-		RT28XX_MLME_HANDLER(pAd);
-		//DBGPRINT(RT_DEBUG_TRACE,("BA Ori Session Timeout(%d) : Send ADD BA again\n", pBAEntry->Token));
-
-		DBGPRINT(RT_DEBUG_TRACE,("BA Ori Session Timeout(%d) to %02x:%02x:%02x:%02x:%02x:%02x Tid:%d Wcid:%d\n"
-		,pBAEntry->Token
-		,pEntry->Addr[0],pEntry->Addr[1],pEntry->Addr[2]
-		,pEntry->Addr[3],pEntry->Addr[4],pEntry->Addr[5]
-		,pBAEntry->TID,pEntry->Aid));
-
-		pBAEntry->Token++;
-		RTMPSetTimer(&pBAEntry->ORIBATimer, ORI_BA_SESSION_TIMEOUT);
-	}
-	else
-	{
-		BATableFreeOriEntry(pAd, pEntry->BAOriWcidArray[pBAEntry->TID]);
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-		Retry sending ADDBA Reqest.
-
-	IRQL = DISPATCH_LEVEL
-
-	Parametrs:
-	p8023Header: if this is already 802.3 format, p8023Header is NULL
-
-	Return	: TRUE if put into rx reordering buffer, shouldn't indicaterxhere.
-				FALSE , then continue indicaterx at this moment.
-	==========================================================================
- */
-VOID BARecSessionIdleTimeout(
-    IN PVOID SystemSpecific1,
-    IN PVOID FunctionContext,
-    IN PVOID SystemSpecific2,
-    IN PVOID SystemSpecific3)
-{
-
-	BA_REC_ENTRY    *pBAEntry = (BA_REC_ENTRY *)FunctionContext;
-	PRTMP_ADAPTER   pAd;
-	ULONG           Now32;
-
-	if (pBAEntry == NULL)
-		return;
-
-	if ((pBAEntry->REC_BA_Status == Recipient_Accept))
-	{
-		NdisGetSystemUpTime(&Now32);
-
-		if (RTMP_TIME_AFTER((unsigned long)Now32, (unsigned long)(pBAEntry->LastIndSeqAtTimer + REC_BA_SESSION_IDLE_TIMEOUT)))
-		{
-			pAd = pBAEntry->pAdapter;
-			// flush all pending reordering mpdus
-			ba_refresh_reordering_mpdus(pAd, pBAEntry);
-			printk("%ld: REC BA session Timeout\n", Now32);
-		}
-	}
-}
-
-
-VOID PeerAddBAReqAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-
-{
-	//	7.4.4.1
-	//ULONG	Idx;
-	UCHAR   Status = 1;
-	UCHAR   pAddr[6];
-	FRAME_ADDBA_RSP ADDframe;
-	PUCHAR         pOutBuffer = NULL;
-	NDIS_STATUS     NStatus;
-	PFRAME_ADDBA_REQ  pAddreqFrame = NULL;
-	//UCHAR		BufSize;
-	ULONG       FrameLen;
-	PULONG      ptemp;
-	PMAC_TABLE_ENTRY	pMacEntry;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("%s ==> (Wcid = %d)\n", __FUNCTION__, Elem->Wcid));
-
-	//hex_dump("AddBAReq", Elem->Msg, Elem->MsgLen);
-
-	//ADDBA Request from unknown peer, ignore this.
-	if (Elem->Wcid >= MAX_LEN_OF_MAC_TABLE)
-		return;
-
-	pMacEntry = &pAd->MacTab.Content[Elem->Wcid];
-	DBGPRINT(RT_DEBUG_TRACE,("BA - PeerAddBAReqAction----> \n"));
-	ptemp = (PULONG)Elem->Msg;
-	//DBGPRINT_RAW(RT_DEBUG_EMU, ("%08x:: %08x:: %08x:: %08x:: %08x:: %08x:: %08x:: %08x:: %08x\n", *(ptemp), *(ptemp+1), *(ptemp+2), *(ptemp+3), *(ptemp+4), *(ptemp+5), *(ptemp+6), *(ptemp+7), *(ptemp+8)));
-
-	if (PeerAddBAReqActionSanity(pAd, Elem->Msg, Elem->MsgLen, pAddr))
-	{
-
-		if ((pAd->CommonCfg.bBADecline == FALSE) && IS_HT_STA(pMacEntry))
-		{
-			pAddreqFrame = (PFRAME_ADDBA_REQ)(&Elem->Msg[0]);
-			printk("Rcv Wcid(%d) AddBAReq\n", Elem->Wcid);
-			if (BARecSessionAdd(pAd, &pAd->MacTab.Content[Elem->Wcid], pAddreqFrame))
-				Status = 0;
-			else
-				Status = 38; // more parameters have invalid values
-		}
-		else
-		{
-			Status = 37; // the request has been declined.
-		}
-	}
-
-	if (pAd->MacTab.Content[Elem->Wcid].ValidAsCLI)
-		ASSERT(pAd->MacTab.Content[Elem->Wcid].Sst == SST_ASSOC);
-
-	pAddreqFrame = (PFRAME_ADDBA_REQ)(&Elem->Msg[0]);
-	// 2. Always send back ADDBA Response
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);	 //Get an unused nonpaged memory
-	if (NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_TRACE,("ACTION - PeerBAAction() allocate memory failed \n"));
-		return;
-	}
-
-	NdisZeroMemory(&ADDframe, sizeof(FRAME_ADDBA_RSP));
-	// 2-1. Prepare ADDBA Response frame.
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if (ADHOC_ON(pAd))
-			ActHeaderInit(pAd, &ADDframe.Hdr, pAddr, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
-		else
-			ActHeaderInit(pAd, &ADDframe.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAddr);
-	}
-#endif // CONFIG_STA_SUPPORT //
-	ADDframe.Category = CATEGORY_BA;
-	ADDframe.Action = ADDBA_RESP;
-	ADDframe.Token = pAddreqFrame->Token;
-	// What is the Status code??  need to check.
-	ADDframe.StatusCode = Status;
-	ADDframe.BaParm.BAPolicy = IMMED_BA;
-	ADDframe.BaParm.AMSDUSupported = 0;
-	ADDframe.BaParm.TID = pAddreqFrame->BaParm.TID;
-	ADDframe.BaParm.BufSize = min(((UCHAR)pAddreqFrame->BaParm.BufSize), (UCHAR)pAd->CommonCfg.BACapability.field.RxBAWinLimit);
-	if (ADDframe.BaParm.BufSize == 0)
-	{
-		ADDframe.BaParm.BufSize = 64;
-	}
-	ADDframe.TimeOutValue = 0; //pAddreqFrame->TimeOutValue;
-
-	*(USHORT *)(&ADDframe.BaParm) = cpu2le16(*(USHORT *)(&ADDframe.BaParm));
-	ADDframe.StatusCode = cpu2le16(ADDframe.StatusCode);
-	ADDframe.TimeOutValue = cpu2le16(ADDframe.TimeOutValue);
-
-	MakeOutgoingFrame(pOutBuffer,               &FrameLen,
-					  sizeof(FRAME_ADDBA_RSP),  &ADDframe,
-			  END_OF_ARGS);
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("%s(%d): TID(%d), BufSize(%d) <== \n", __FUNCTION__, Elem->Wcid, ADDframe.BaParm.TID,
-							  ADDframe.BaParm.BufSize));
-}
-
-
-VOID PeerAddBARspAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-
-{
-	//UCHAR		Idx, i;
-	//PUCHAR		   pOutBuffer = NULL;
-	PFRAME_ADDBA_RSP    pFrame = NULL;
-	//PBA_ORI_ENTRY		pBAEntry;
-
-	//ADDBA Response from unknown peer, ignore this.
-	if (Elem->Wcid >= MAX_LEN_OF_MAC_TABLE)
-		return;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("%s ==> Wcid(%d)\n", __FUNCTION__, Elem->Wcid));
-
-	//hex_dump("PeerAddBARspAction()", Elem->Msg, Elem->MsgLen);
-
-	if (PeerAddBARspActionSanity(pAd, Elem->Msg, Elem->MsgLen))
-	{
-		pFrame = (PFRAME_ADDBA_RSP)(&Elem->Msg[0]);
-
-		DBGPRINT(RT_DEBUG_TRACE, ("\t\t StatusCode = %d\n", pFrame->StatusCode));
-		switch (pFrame->StatusCode)
-		{
-			case 0:
-				// I want a BAsession with this peer as an originator.
-				BAOriSessionAdd(pAd, &pAd->MacTab.Content[Elem->Wcid], pFrame);
-				break;
-			default:
-				// check status == USED ???
-				BAOriSessionTearDown(pAd, Elem->Wcid, pFrame->BaParm.TID, TRUE, FALSE);
-				break;
-		}
-		// Rcv Decline StatusCode
-		if ((pFrame->StatusCode == 37)
-#ifdef CONFIG_STA_SUPPORT
-            || ((pAd->OpMode == OPMODE_STA) && STA_TGN_WIFI_ON(pAd) && (pFrame->StatusCode != 0))
-#endif // CONFIG_STA_SUPPORT //
-            )
-		{
-			pAd->MacTab.Content[Elem->Wcid].BADeclineBitmap |= 1<<pFrame->BaParm.TID;
-		}
-	}
-}
-
-VOID PeerDelBAAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-
-{
-	//UCHAR				Idx;
-	//PUCHAR				pOutBuffer = NULL;
-	PFRAME_DELBA_REQ    pDelFrame = NULL;
-
-	DBGPRINT(RT_DEBUG_TRACE,("%s ==>\n", __FUNCTION__));
-	//DELBA Request from unknown peer, ignore this.
-	if (PeerDelBAActionSanity(pAd, Elem->Wcid, Elem->Msg, Elem->MsgLen))
-	{
-		pDelFrame = (PFRAME_DELBA_REQ)(&Elem->Msg[0]);
-		if (pDelFrame->DelbaParm.Initiator == ORIGINATOR)
-		{
-			DBGPRINT(RT_DEBUG_TRACE,("BA - PeerDelBAAction----> ORIGINATOR\n"));
-			BARecSessionTearDown(pAd, Elem->Wcid, pDelFrame->DelbaParm.TID, TRUE);
-		}
-		else
-		{
-			DBGPRINT(RT_DEBUG_TRACE,("BA - PeerDelBAAction----> RECIPIENT, Reason = %d\n",  pDelFrame->ReasonCode));
-			//hex_dump("DelBA Frame", pDelFrame, Elem->MsgLen);
-			BAOriSessionTearDown(pAd, Elem->Wcid, pDelFrame->DelbaParm.TID, TRUE, FALSE);
-		}
-	}
-}
-
-
-BOOLEAN CntlEnqueueForRecv(
-						  IN PRTMP_ADAPTER		pAd,
-						  IN ULONG				Wcid,
-						  IN ULONG				MsgLen,
-						  IN PFRAME_BA_REQ		pMsg)
-{
-	PFRAME_BA_REQ   pFrame = pMsg;
-	//PRTMP_REORDERBUF	pBuffer;
-	//PRTMP_REORDERBUF	pDmaBuf;
-	PBA_REC_ENTRY pBAEntry;
-	//BOOLEAN 	Result;
-	ULONG   Idx;
-	//UCHAR	NumRxPkt;
-	UCHAR	TID;//, i;
-
-	TID = (UCHAR)pFrame->BARControl.TID;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("%s(): BAR-Wcid(%ld), Tid (%d)\n", __FUNCTION__, Wcid, TID));
-	//hex_dump("BAR", (PCHAR) pFrame, MsgLen);
-	// Do nothing if the driver is starting halt state.
-	// This might happen when timer already been fired before cancel timer with mlmehalt
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
-		return FALSE;
-
-	// First check the size, it MUST not exceed the mlme queue size
-	if (MsgLen > MGMT_DMA_BUFFER_SIZE)
-	{
-		DBGPRINT_ERR(("CntlEnqueueForRecv: frame too large, size = %ld \n", MsgLen));
-		return FALSE;
-	}
-	else if (MsgLen != sizeof(FRAME_BA_REQ))
-	{
-		DBGPRINT_ERR(("CntlEnqueueForRecv: BlockAck Request frame length size = %ld incorrect\n", MsgLen));
-		return FALSE;
-	}
-	else if (MsgLen != sizeof(FRAME_BA_REQ))
-	{
-		DBGPRINT_ERR(("CntlEnqueueForRecv: BlockAck Request frame length size = %ld incorrect\n", MsgLen));
-		return FALSE;
-	}
-
-	if ((Wcid < MAX_LEN_OF_MAC_TABLE) && (TID < 8))
-		{
-		// if this receiving packet is from SA that is in our OriEntry. Since WCID <9 has direct mapping. no need search.
-		Idx = pAd->MacTab.Content[Wcid].BARecWcidArray[TID];
-		pBAEntry = &pAd->BATable.BARecEntry[Idx];
-		}
-		else
-		{
-		return FALSE;
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("BAR(%ld) : Tid (%d) - %04x:%04x\n", Wcid, TID, pFrame->BAStartingSeq.field.StartSeq, pBAEntry->LastIndSeq ));
-
-	if (SEQ_SMALLER(pBAEntry->LastIndSeq, pFrame->BAStartingSeq.field.StartSeq, MAXSEQ))
-	{
-		//printk("BAR Seq = %x, LastIndSeq = %x\n", pFrame->BAStartingSeq.field.StartSeq, pBAEntry->LastIndSeq);
-		ba_indicate_reordering_mpdus_le_seq(pAd, pBAEntry, pFrame->BAStartingSeq.field.StartSeq);
-		pBAEntry->LastIndSeq = (pFrame->BAStartingSeq.field.StartSeq == 0) ? MAXSEQ :(pFrame->BAStartingSeq.field.StartSeq -1);
-	}
-	//ba_refresh_reordering_mpdus(pAd, pBAEntry);
-	return TRUE;
-}
-
-/*
-Description : Send PSMP Action frame If PSMP mode switches.
-*/
-VOID SendPSMPAction(
-				   IN PRTMP_ADAPTER		pAd,
-				   IN UCHAR				Wcid,
-				   IN UCHAR				Psmp)
-{
-	PUCHAR          pOutBuffer = NULL;
-	NDIS_STATUS     NStatus;
-	//ULONG           Idx;
-	FRAME_PSMP_ACTION   Frame;
-	ULONG           FrameLen;
-#ifdef RT30xx
-	UCHAR			bbpdata=0;
-	UINT32			macdata;
-#endif // RT30xx //
-
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);	 //Get an unused nonpaged memory
-	if (NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("BA - MlmeADDBAAction() allocate memory failed \n"));
-		return;
-	}
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		ActHeaderInit(pAd, &Frame.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->MacTab.Content[Wcid].Addr);
-#endif // CONFIG_STA_SUPPORT //
-
-	Frame.Category = CATEGORY_HT;
-	Frame.Action = SMPS_ACTION;
-	switch (Psmp)
-	{
-		case MMPS_ENABLE:
-#ifdef RT30xx
-			if (IS_RT3090(pAd))
-			{
-				// disable MMPS BBP control register
-				RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &bbpdata);
-				bbpdata &= ~(0x04);	//bit 2
-				RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, bbpdata);
-
-				// disable MMPS MAC control register
-				RTMP_IO_READ32(pAd, 0x1210, &macdata);
-				macdata &= ~(0x09);	//bit 0, 3
-				RTMP_IO_WRITE32(pAd, 0x1210, macdata);
-			}
-#endif // RT30xx //
-			Frame.Psmp = 0;
-			break;
-		case MMPS_DYNAMIC:
-#ifdef RT30xx
-			if (IS_RT3090(pAd))
-			{
-				// enable MMPS BBP control register
-				RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &bbpdata);
-				bbpdata |= 0x04;	//bit 2
-				RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, bbpdata);
-
-				// enable MMPS MAC control register
-				RTMP_IO_READ32(pAd, 0x1210, &macdata);
-				macdata |= 0x09;	//bit 0, 3
-				RTMP_IO_WRITE32(pAd, 0x1210, macdata);
-			}
-#endif // RT30xx //
-			Frame.Psmp = 3;
-			break;
-		case MMPS_STATIC:
-#ifdef RT30xx
-			if (IS_RT3090(pAd))
-			{
-				// enable MMPS BBP control register
-				RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &bbpdata);
-				bbpdata |= 0x04;	//bit 2
-				RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, bbpdata);
-
-				// enable MMPS MAC control register
-				RTMP_IO_READ32(pAd, 0x1210, &macdata);
-				macdata |= 0x09;	//bit 0, 3
-				RTMP_IO_WRITE32(pAd, 0x1210, macdata);
-			}
-#endif // RT30xx //
-			Frame.Psmp = 1;
-			break;
-	}
-	MakeOutgoingFrame(pOutBuffer,               &FrameLen,
-					  sizeof(FRAME_PSMP_ACTION),      &Frame,
-					  END_OF_ARGS);
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-	DBGPRINT(RT_DEBUG_ERROR,("HT - SendPSMPAction( %d )  \n", Frame.Psmp));
-}
-
-
-#define RADIO_MEASUREMENT_REQUEST_ACTION	0
-
-typedef struct PACKED
-{
-	UCHAR	RegulatoryClass;
-	UCHAR	ChannelNumber;
-	USHORT	RandomInterval;
-	USHORT	MeasurementDuration;
-	UCHAR	MeasurementMode;
-	UCHAR   BSSID[MAC_ADDR_LEN];
-	UCHAR	ReportingCondition;
-	UCHAR	Threshold;
-	UCHAR   SSIDIE[2];			// 2 byte
-} BEACON_REQUEST;
-
-typedef struct PACKED
-{
-	UCHAR	ID;
-	UCHAR	Length;
-	UCHAR	Token;
-	UCHAR	RequestMode;
-	UCHAR	Type;
-} MEASUREMENT_REQ;
-
-
-
-
-void convert_reordering_packet_to_preAMSDU_or_802_3_packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN  UCHAR			FromWhichBSSID)
-{
-	PNDIS_PACKET	pRxPkt;
-	UCHAR			Header802_3[LENGTH_802_3];
-
-	// 1. get 802.3 Header
-	// 2. remove LLC
-	// 		a. pointer pRxBlk->pData to payload
-	//      b. modify pRxBlk->DataSize
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
-#endif // CONFIG_STA_SUPPORT //
-
-	ASSERT(pRxBlk->pRxPacket);
-	pRxPkt = RTPKT_TO_OSPKT(pRxBlk->pRxPacket);
-
-	RTPKT_TO_OSPKT(pRxPkt)->dev = get_netdev_from_bssid(pAd, FromWhichBSSID);
-	RTPKT_TO_OSPKT(pRxPkt)->data = pRxBlk->pData;
-	RTPKT_TO_OSPKT(pRxPkt)->len = pRxBlk->DataSize;
-	RTPKT_TO_OSPKT(pRxPkt)->tail = RTPKT_TO_OSPKT(pRxPkt)->data + RTPKT_TO_OSPKT(pRxPkt)->len;
-
-	//
-	// copy 802.3 header, if necessary
-	//
-	if (!RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU))
-	{
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-#ifdef LINUX
-			NdisMoveMemory(skb_push(pRxPkt, LENGTH_802_3), Header802_3, LENGTH_802_3);
-#endif
-#ifdef UCOS
-			NdisMoveMemory(net_pkt_push(pRxPkt, LENGTH_802_3), Header802_3, LENGTH_802_3);
-#endif
-		}
-#endif // CONFIG_STA_SUPPORT //
-	}
-}
-
-
-#define INDICATE_LEGACY_OR_AMSDU(_pAd, _pRxBlk, _fromWhichBSSID)		\
-	do																	\
-	{																	\
-    	if (RX_BLK_TEST_FLAG(_pRxBlk, fRX_AMSDU))						\
-    	{																\
-    		Indicate_AMSDU_Packet(_pAd, _pRxBlk, _fromWhichBSSID);		\
-    	}																\
-		else if (RX_BLK_TEST_FLAG(_pRxBlk, fRX_EAP))					\
-		{																\
-			Indicate_EAPOL_Packet(_pAd, _pRxBlk, _fromWhichBSSID);		\
-		}																\
-    	else															\
-    	{																\
-    		Indicate_Legacy_Packet(_pAd, _pRxBlk, _fromWhichBSSID);		\
-    	}																\
-	} while (0);
-
-
-
-static VOID ba_enqueue_reordering_packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PBA_REC_ENTRY	pBAEntry,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID)
-{
-	struct reordering_mpdu *mpdu_blk;
-	UINT16	Sequence = (UINT16) pRxBlk->pHeader->Sequence;
-
-	mpdu_blk = ba_mpdu_blk_alloc(pAd);
-	if (mpdu_blk != NULL)
-	{
-		// Write RxD buffer address & allocated buffer length
-		NdisAcquireSpinLock(&pBAEntry->RxReRingLock);
-
-		mpdu_blk->Sequence = Sequence;
-
-		mpdu_blk->bAMSDU = RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU);
-
-		convert_reordering_packet_to_preAMSDU_or_802_3_packet(pAd, pRxBlk, FromWhichBSSID);
-
-		STATS_INC_RX_PACKETS(pAd, FromWhichBSSID);
-
-        //
-		// it is necessary for reordering packet to record
-		// which BSS it come from
-		//
-		RTMP_SET_PACKET_IF(pRxBlk->pRxPacket, FromWhichBSSID);
-
-		mpdu_blk->pPacket = pRxBlk->pRxPacket;
-
-		if (ba_reordering_mpdu_insertsorted(&pBAEntry->list, mpdu_blk) == FALSE)
-		{
-			// had been already within reordering list
-			// don't indicate
-			RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_SUCCESS);
-			ba_mpdu_blk_free(pAd, mpdu_blk);
-		}
-
-		ASSERT((0<= pBAEntry->list.qlen)  && (pBAEntry->list.qlen <= pBAEntry->BAWinSize));
-		NdisReleaseSpinLock(&pBAEntry->RxReRingLock);
-	}
-	else
-	{
-		DBGPRINT(RT_DEBUG_ERROR,  ("!!! (%d) Can't allocate reordering mpdu blk\n",
-								   pBAEntry->list.qlen));
-		/*
-		 * flush all pending reordering mpdus
-		 * and receving mpdu to upper layer
-		 * make tcp/ip to take care reordering mechanism
-		 */
-		//ba_refresh_reordering_mpdus(pAd, pBAEntry);
-		ba_indicate_reordering_mpdus_le_seq(pAd, pBAEntry, Sequence);
-
-		pBAEntry->LastIndSeq = Sequence;
-		INDICATE_LEGACY_OR_AMSDU(pAd, pRxBlk, FromWhichBSSID);
-	}
-}
-
-
-/*
-	==========================================================================
-	Description:
-		Indicate this packet to upper layer or put it into reordering buffer
-
-	Parametrs:
-		pRxBlk         : carry necessary packet info 802.11 format
-		FromWhichBSSID : the packet received from which BSS
-
-	Return	:
-			  none
-
-	Note    :
-	          the packet queued into reordering buffer need to cover to 802.3 format
-			  or pre_AMSDU format
-	==========================================================================
- */
-
-VOID Indicate_AMPDU_Packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID)
-{
-	USHORT				Idx;
-	PBA_REC_ENTRY		pBAEntry = NULL;
-	UINT16				Sequence = pRxBlk->pHeader->Sequence;
-	ULONG				Now32;
-	UCHAR				Wcid = pRxBlk->pRxWI->WirelessCliID;
-	UCHAR				TID = pRxBlk->pRxWI->TID;
-
-
-	if (!RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU) &&  (pRxBlk->DataSize > MAX_RX_PKT_LEN))
-	{
-		// release packet
-		RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
-		return;
-	}
-
-	if (Wcid < MAX_LEN_OF_MAC_TABLE)
-	{
-		Idx = pAd->MacTab.Content[Wcid].BARecWcidArray[TID];
-		if (Idx == 0)
-		{
-			/* Rec BA Session had been torn down */
-			INDICATE_LEGACY_OR_AMSDU(pAd, pRxBlk, FromWhichBSSID);
-			return;
-		}
-		pBAEntry = &pAd->BATable.BARecEntry[Idx];
-	}
-	else
-	{
-		// impossible !!!
-		ASSERT(0);
-		// release packet
-		RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
-		return;
-	}
-
-	ASSERT(pBAEntry);
-
-	// update last rx time
-	NdisGetSystemUpTime(&Now32);
-
-	pBAEntry->rcvSeq = Sequence;
-
-
-	ba_flush_reordering_timeout_mpdus(pAd, pBAEntry, Now32);
-	pBAEntry->LastIndSeqAtTimer = Now32;
-
-	//
-	// Reset Last Indicate Sequence
-	//
-	if (pBAEntry->LastIndSeq == RESET_RCV_SEQ)
-	{
-		ASSERT((pBAEntry->list.qlen == 0) && (pBAEntry->list.next == NULL));
-
-		// reset rcv sequence of BA session
-		pBAEntry->LastIndSeq = Sequence;
-		pBAEntry->LastIndSeqAtTimer = Now32;
-		INDICATE_LEGACY_OR_AMSDU(pAd, pRxBlk, FromWhichBSSID);
-		return;
-	}
-
-
-	//
-	// I. Check if in order.
-	//
-	if (SEQ_STEPONE(Sequence, pBAEntry->LastIndSeq, MAXSEQ))
-	{
-		USHORT  LastIndSeq;
-
-		pBAEntry->LastIndSeq = Sequence;
-		INDICATE_LEGACY_OR_AMSDU(pAd, pRxBlk, FromWhichBSSID);
- 		LastIndSeq = ba_indicate_reordering_mpdus_in_order(pAd, pBAEntry, pBAEntry->LastIndSeq);
-		if (LastIndSeq != RESET_RCV_SEQ)
-		{
-			pBAEntry->LastIndSeq = LastIndSeq;
-		}
-		pBAEntry->LastIndSeqAtTimer = Now32;
-	}
-	//
-	// II. Drop Duplicated Packet
-	//
-	else if (Sequence == pBAEntry->LastIndSeq)
-	{
-
-		// drop and release packet
-		pBAEntry->nDropPacket++;
-		RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
-	}
-	//
-	// III. Drop Old Received Packet
-	//
-	else if (SEQ_SMALLER(Sequence, pBAEntry->LastIndSeq, MAXSEQ))
-	{
-
-		// drop and release packet
-		pBAEntry->nDropPacket++;
-		RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
-	}
-	//
-	// IV. Receive Sequence within Window Size
-	//
-	else if (SEQ_SMALLER(Sequence, (((pBAEntry->LastIndSeq+pBAEntry->BAWinSize+1)) & MAXSEQ), MAXSEQ))
-	{
-		ba_enqueue_reordering_packet(pAd, pBAEntry, pRxBlk, FromWhichBSSID);
-	}
-	//
-	// V. Receive seq surpasses Win(lastseq + nMSDU). So refresh all reorder buffer
-	//
-	else
-	{
-		LONG WinStartSeq, TmpSeq;
-
-
-		TmpSeq = Sequence - (pBAEntry->BAWinSize) -1;
-		if (TmpSeq < 0)
-		{
-			TmpSeq = (MAXSEQ+1) + TmpSeq;
-		}
-		WinStartSeq = (TmpSeq+1) & MAXSEQ;
-		ba_indicate_reordering_mpdus_le_seq(pAd, pBAEntry, WinStartSeq);
-		pBAEntry->LastIndSeq = WinStartSeq; //TmpSeq;
-
-		pBAEntry->LastIndSeqAtTimer = Now32;
-
-		ba_enqueue_reordering_packet(pAd, pBAEntry, pRxBlk, FromWhichBSSID);
-
-		TmpSeq = ba_indicate_reordering_mpdus_in_order(pAd, pBAEntry, pBAEntry->LastIndSeq);
-		if (TmpSeq != RESET_RCV_SEQ)
-		{
-			pBAEntry->LastIndSeq = TmpSeq;
-		}
-	}
-}
-
-#endif // DOT11_N_SUPPORT //
-
+#include "../../rt2870/common/ba_action.c"
diff --git a/drivers/staging/rt3070/common/cmm_data.c b/drivers/staging/rt3070/common/cmm_data.c
index 85f92b9f83d..02e202db4da 100644
--- a/drivers/staging/rt3070/common/cmm_data.c
+++ b/drivers/staging/rt3070/common/cmm_data.c
@@ -1,2827 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-*/
-
-#include "../rt_config.h"
-
-#define MAX_TX_IN_TBTT		(16)
-
-
-UCHAR	SNAP_802_1H[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};
-UCHAR	SNAP_BRIDGE_TUNNEL[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8};
-// Add Cisco Aironet SNAP heade for CCX2 support
-UCHAR	SNAP_AIRONET[] = {0xaa, 0xaa, 0x03, 0x00, 0x40, 0x96, 0x00, 0x00};
-UCHAR	CKIP_LLC_SNAP[] = {0xaa, 0xaa, 0x03, 0x00, 0x40, 0x96, 0x00, 0x02};
-UCHAR	EAPOL_LLC_SNAP[]= {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00, 0x88, 0x8e};
-UCHAR	EAPOL[] = {0x88, 0x8e};
-UCHAR   TPID[] = {0x81, 0x00}; /* VLAN related */
-
-UCHAR	IPX[] = {0x81, 0x37};
-UCHAR	APPLE_TALK[] = {0x80, 0xf3};
-UCHAR	RateIdToPlcpSignal[12] = {
-	 0, /* RATE_1 */	1, /* RATE_2 */ 	2, /* RATE_5_5 */	3, /* RATE_11 */	// see BBP spec
-	11, /* RATE_6 */   15, /* RATE_9 */    10, /* RATE_12 */   14, /* RATE_18 */	// see IEEE802.11a-1999 p.14
-	 9, /* RATE_24 */  13, /* RATE_36 */	8, /* RATE_48 */   12  /* RATE_54 */ }; // see IEEE802.11a-1999 p.14
-
-UCHAR	 OfdmSignalToRateId[16] = {
-	RATE_54,  RATE_54,	RATE_54,  RATE_54,	// OFDM PLCP Signal = 0,  1,  2,  3 respectively
-	RATE_54,  RATE_54,	RATE_54,  RATE_54,	// OFDM PLCP Signal = 4,  5,  6,  7 respectively
-	RATE_48,  RATE_24,	RATE_12,  RATE_6,	// OFDM PLCP Signal = 8,  9,  10, 11 respectively
-	RATE_54,  RATE_36,	RATE_18,  RATE_9,	// OFDM PLCP Signal = 12, 13, 14, 15 respectively
-};
-
-UCHAR	 OfdmRateToRxwiMCS[12] = {
-	0,  0,	0,  0,
-	0,  1,	2,  3,	// OFDM rate 6,9,12,18 = rxwi mcs 0,1,2,3
-	4,  5,	6,  7,	// OFDM rate 24,36,48,54 = rxwi mcs 4,5,6,7
-};
-UCHAR	 RxwiMCSToOfdmRate[12] = {
-	RATE_6,  RATE_9,	RATE_12,  RATE_18,
-	RATE_24,  RATE_36,	RATE_48,  RATE_54,	// OFDM rate 6,9,12,18 = rxwi mcs 0,1,2,3
-	4,  5,	6,  7,	// OFDM rate 24,36,48,54 = rxwi mcs 4,5,6,7
-};
-
-char*   MCSToMbps[] = {"1Mbps","2Mbps","5.5Mbps","11Mbps","06Mbps","09Mbps","12Mbps","18Mbps","24Mbps","36Mbps","48Mbps","54Mbps","MM-0","MM-1","MM-2","MM-3","MM-4","MM-5","MM-6","MM-7","MM-8","MM-9","MM-10","MM-11","MM-12","MM-13","MM-14","MM-15","MM-32","ee1","ee2","ee3"};
-
-UCHAR default_cwmin[]={CW_MIN_IN_BITS, CW_MIN_IN_BITS, CW_MIN_IN_BITS-1, CW_MIN_IN_BITS-2};
-//UCHAR default_cwmax[]={CW_MAX_IN_BITS, CW_MAX_IN_BITS, CW_MIN_IN_BITS, CW_MIN_IN_BITS-1};
-UCHAR default_sta_aifsn[]={3,7,2,2};
-
-UCHAR MapUserPriorityToAccessCategory[8] = {QID_AC_BE, QID_AC_BK, QID_AC_BK, QID_AC_BE, QID_AC_VI, QID_AC_VI, QID_AC_VO, QID_AC_VO};
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		API for MLME to transmit management frame to AP (BSS Mode)
-	or station (IBSS Mode)
-
-	Arguments:
-		pAd Pointer to our adapter
-		pData		Pointer to the outgoing 802.11 frame
-		Length		Size of outgoing management frame
-
-	Return Value:
-		NDIS_STATUS_FAILURE
-		NDIS_STATUS_PENDING
-		NDIS_STATUS_SUCCESS
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-NDIS_STATUS MiniportMMRequest(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			QueIdx,
-	IN	PUCHAR			pData,
-	IN	UINT			Length)
-{
-	PNDIS_PACKET	pPacket;
-	NDIS_STATUS  	Status = NDIS_STATUS_SUCCESS;
-	ULONG	 		FreeNum;
-	UCHAR			IrqState;
-	UCHAR			rtmpHwHdr[TXINFO_SIZE + TXWI_SIZE]; //RTMP_HW_HDR_LEN];
-
-	ASSERT(Length <= MGMT_DMA_BUFFER_SIZE);
-
-	QueIdx=3;
-
-	// 2860C use Tx Ring
-
-	IrqState = pAd->irq_disabled;
-
-	do
-	{
-		// Reset is in progress, stop immediately
-		if ( RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS) ||
-			 RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)||
-			 !RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP))
-		{
-			Status = NDIS_STATUS_FAILURE;
-			break;
-		}
-
-		// Check Free priority queue
-		// Since we use PBF Queue2 for management frame.  Its corresponding DMA ring should be using TxRing.
-
-		// 2860C use Tx Ring
-		if (pAd->MACVersion == 0x28600100)
-		{
-			FreeNum = GET_TXRING_FREENO(pAd, QueIdx);
-		}
-		else
-		{
-			FreeNum = GET_MGMTRING_FREENO(pAd);
-		}
-
-		if ((FreeNum > 0))
-		{
-			// We need to reserve space for rtmp hardware header. i.e., TxWI for RT2860 and TxInfo+TxWI for RT2870
-			NdisZeroMemory(&rtmpHwHdr, (TXINFO_SIZE + TXWI_SIZE));
-			Status = RTMPAllocateNdisPacket(pAd, &pPacket, (PUCHAR)&rtmpHwHdr, (TXINFO_SIZE + TXWI_SIZE), pData, Length);
-			if (Status != NDIS_STATUS_SUCCESS)
-			{
-				DBGPRINT(RT_DEBUG_WARN, ("MiniportMMRequest (error:: can't allocate NDIS PACKET)\n"));
-				break;
-			}
-
-			//pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK;
-			//pAd->CommonCfg.MlmeRate = RATE_2;
-
-
-			Status = MlmeHardTransmit(pAd, QueIdx, pPacket);
-			if (Status != NDIS_STATUS_SUCCESS)
-				RTMPFreeNdisPacket(pAd, pPacket);
-		}
-		else
-		{
-			pAd->RalinkCounters.MgmtRingFullCount++;
-			DBGPRINT(RT_DEBUG_ERROR, ("Qidx(%d), not enough space in MgmtRing, MgmtRingFullCount=%ld!\n",
-										QueIdx, pAd->RalinkCounters.MgmtRingFullCount));
-		}
-
-	} while (FALSE);
-
-
-	return Status;
-}
-
-
-
-NDIS_STATUS MlmeDataHardTransmit(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR	QueIdx,
-	IN	PNDIS_PACKET	pPacket);
-
-#define MAX_DATAMM_RETRY	3
-/*
-	========================================================================
-
-	Routine Description:
-		API for MLME to transmit management frame to AP (BSS Mode)
-	or station (IBSS Mode)
-
-	Arguments:
-		pAd Pointer to our adapter
-		pData		Pointer to the outgoing 802.11 frame
-		Length		Size of outgoing management frame
-
-	Return Value:
-		NDIS_STATUS_FAILURE
-		NDIS_STATUS_PENDING
-		NDIS_STATUS_SUCCESS
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-NDIS_STATUS MiniportDataMMRequest(
-							 IN  PRTMP_ADAPTER   pAd,
-							 IN  UCHAR           QueIdx,
-							 IN  PUCHAR          pData,
-							 IN  UINT            Length)
-{
-	PNDIS_PACKET    pPacket;
-	NDIS_STATUS  Status = NDIS_STATUS_SUCCESS;
-	ULONG    FreeNum;
-	int 	retry = 0;
-	UCHAR           IrqState;
-	UCHAR			rtmpHwHdr[TXINFO_SIZE + TXWI_SIZE]; //RTMP_HW_HDR_LEN];
-
-	ASSERT(Length <= MGMT_DMA_BUFFER_SIZE);
-
-	// 2860C use Tx Ring
-	IrqState = pAd->irq_disabled;
-
-	do
-	{
-		// Reset is in progress, stop immediately
-		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS) ||
-			 RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)||
-			!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP))
-		{
-			Status = NDIS_STATUS_FAILURE;
-			break;
-		}
-
-		// Check Free priority queue
-		// Since we use PBF Queue2 for management frame.  Its corresponding DMA ring should be using TxRing.
-
-		// 2860C use Tx Ring
-
-		// free Tx(QueIdx) resources
-		FreeNum = GET_TXRING_FREENO(pAd, QueIdx);
-
-		if ((FreeNum > 0))
-		{
-			// We need to reserve space for rtmp hardware header. i.e., TxWI for RT2860 and TxInfo+TxWI for RT2870
-			NdisZeroMemory(&rtmpHwHdr, (TXINFO_SIZE + TXWI_SIZE));
-			Status = RTMPAllocateNdisPacket(pAd, &pPacket, (PUCHAR)&rtmpHwHdr, (TXINFO_SIZE + TXWI_SIZE), pData, Length);
-			if (Status != NDIS_STATUS_SUCCESS)
-			{
-				DBGPRINT(RT_DEBUG_WARN, ("MiniportMMRequest (error:: can't allocate NDIS PACKET)\n"));
-				break;
-			}
-
-			//pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK;
-			//pAd->CommonCfg.MlmeRate = RATE_2;
-
-
-			Status = MlmeDataHardTransmit(pAd, QueIdx, pPacket);
-			if (Status != NDIS_STATUS_SUCCESS)
-				RTMPFreeNdisPacket(pAd, pPacket);
-			retry = MAX_DATAMM_RETRY;
-		}
-		else
-		{
-			retry ++;
-
-			printk("retry %d\n", retry);
-			pAd->RalinkCounters.MgmtRingFullCount++;
-
-			if (retry >= MAX_DATAMM_RETRY)
-			{
-				DBGPRINT(RT_DEBUG_ERROR, ("Qidx(%d), not enough space in DataRing, MgmtRingFullCount=%ld!\n",
-											QueIdx, pAd->RalinkCounters.MgmtRingFullCount));
-			}
-		}
-
-	} while (retry < MAX_DATAMM_RETRY);
-
-
-	return Status;
-}
-
-
-
-
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Copy frame from waiting queue into relative ring buffer and set
-	appropriate ASIC register to kick hardware transmit function
-
-	Arguments:
-		pAd Pointer to our adapter
-		pBuffer 	Pointer to	memory of outgoing frame
-		Length		Size of outgoing management frame
-
-	Return Value:
-		NDIS_STATUS_FAILURE
-		NDIS_STATUS_PENDING
-		NDIS_STATUS_SUCCESS
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-NDIS_STATUS MlmeHardTransmit(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			QueIdx,
-	IN	PNDIS_PACKET	pPacket)
-{
-	if ((pAd->CommonCfg.RadarDetect.RDMode != RD_NORMAL_MODE)
-#ifdef CARRIER_DETECTION_SUPPORT
-#endif // CARRIER_DETECTION_SUPPORT //
-		)
-	{
-		return NDIS_STATUS_FAILURE;
-	}
-
-		return MlmeHardTransmitMgmtRing(pAd,QueIdx,pPacket);
-
-}
-
-NDIS_STATUS MlmeDataHardTransmit(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR	QueIdx,
-	IN	PNDIS_PACKET	pPacket)
-{
-	if ((pAd->CommonCfg.RadarDetect.RDMode != RD_NORMAL_MODE)
-#ifdef CARRIER_DETECTION_SUPPORT
-#endif // CARRIER_DETECTION_SUPPORT //
-		)
-	{
-		return NDIS_STATUS_FAILURE;
-	}
-
-#ifdef RT2870
-	return MlmeHardTransmitMgmtRing(pAd,QueIdx,pPacket);
-#endif // RT2870 //
-}
-
-
-
-
-
-NDIS_STATUS MlmeHardTransmitMgmtRing(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR	QueIdx,
-	IN	PNDIS_PACKET	pPacket)
-{
-	PACKET_INFO 	PacketInfo;
-	PUCHAR			pSrcBufVA;
-	UINT			SrcBufLen;
-	PHEADER_802_11	pHeader_802_11;
-	BOOLEAN 		bAckRequired, bInsertTimestamp;
-	UCHAR			MlmeRate;
-	PTXWI_STRUC 	pFirstTxWI;
-	MAC_TABLE_ENTRY	*pMacEntry = NULL;
-
-	RTMP_QueryPacketInfo(pPacket, &PacketInfo, &pSrcBufVA, &SrcBufLen);
-
-	// Make sure MGMT ring resource won't be used by other threads
-// sample, for IRQ LOCK -> SEM LOCK
-//	IrqState = pAd->irq_disabled;
-//	if (!IrqState)
-		RTMP_SEM_LOCK(&pAd->MgmtRingLock);
-
-
-	if (pSrcBufVA == NULL)
-	{
-		// The buffer shouldn't be NULL
-//		if (!IrqState)
-			RTMP_SEM_UNLOCK(&pAd->MgmtRingLock);
-		return NDIS_STATUS_FAILURE;
-	}
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// outgoing frame always wakeup PHY to prevent frame lost
-		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
-			AsicForceWakeup(pAd, TRUE);
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	pFirstTxWI = (PTXWI_STRUC)(pSrcBufVA +  TXINFO_SIZE);
-	pHeader_802_11 = (PHEADER_802_11) (pSrcBufVA + TXINFO_SIZE + TXWI_SIZE); //TXWI_SIZE);
-
-	if (pHeader_802_11->Addr1[0] & 0x01)
-	{
-		MlmeRate = pAd->CommonCfg.BasicMlmeRate;
-	}
-	else
-	{
-		MlmeRate = pAd->CommonCfg.MlmeRate;
-	}
-
-	// Verify Mlme rate for a / g bands.
-	if ((pAd->LatchRfRegs.Channel > 14) && (MlmeRate < RATE_6)) // 11A band
-		MlmeRate = RATE_6;
-
-	if ((pHeader_802_11->FC.Type == BTYPE_DATA) &&
-		(pHeader_802_11->FC.SubType == SUBTYPE_QOS_NULL))
-	{
-		pMacEntry = MacTableLookup(pAd, pHeader_802_11->Addr1);
-	}
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// Fixed W52 with Activity scan issue in ABG_MIXED and ABGN_MIXED mode.
-		if (pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED
-#ifdef DOT11_N_SUPPORT
-			|| pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED
-#endif // DOT11_N_SUPPORT //
-		)
-		{
-			if (pAd->LatchRfRegs.Channel > 14)
-				pAd->CommonCfg.MlmeTransmit.field.MODE = 1;
-			else
-				pAd->CommonCfg.MlmeTransmit.field.MODE = 0;
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	//
-	// Should not be hard code to set PwrMgmt to 0 (PWR_ACTIVE)
-	// Snice it's been set to 0 while on MgtMacHeaderInit
-	// By the way this will cause frame to be send on PWR_SAVE failed.
-	//
-	// pHeader_802_11->FC.PwrMgmt = 0; // (pAd->StaCfg.Psm == PWR_SAVE);
-	//
-	// In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame
-#ifdef CONFIG_STA_SUPPORT
-    // Data-Null packets alse pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD
-	if ((pHeader_802_11->FC.Type != BTYPE_DATA) && (pHeader_802_11->FC.Type != BTYPE_CNTL))
-	{
-		if ((pAd->StaCfg.Psm == PWR_SAVE) &&
-			(pHeader_802_11->FC.SubType == SUBTYPE_ACTION))
-			pHeader_802_11->FC.PwrMgmt = PWR_SAVE;
-		else
-			pHeader_802_11->FC.PwrMgmt = PWR_ACTIVE;
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	bInsertTimestamp = FALSE;
-	if (pHeader_802_11->FC.Type == BTYPE_CNTL) // must be PS-POLL
-	{
-#ifdef CONFIG_STA_SUPPORT
-		//Set PM bit in ps-poll, to fix WLK 1.2  PowerSaveMode_ext failure issue.
-		if ((pAd->OpMode == OPMODE_STA) && (pHeader_802_11->FC.SubType == SUBTYPE_PS_POLL))
-		{
-			pHeader_802_11->FC.PwrMgmt = PWR_SAVE;
-		}
-#endif // CONFIG_STA_SUPPORT //
-		bAckRequired = FALSE;
-	}
-	else // BTYPE_MGMT or BTYPE_DATA(must be NULL frame)
-	{
-		//pAd->Sequence++;
-		//pHeader_802_11->Sequence = pAd->Sequence;
-
-		if (pHeader_802_11->Addr1[0] & 0x01) // MULTICAST, BROADCAST
-		{
-			bAckRequired = FALSE;
-			pHeader_802_11->Duration = 0;
-		}
-		else
-		{
-			bAckRequired = TRUE;
-			pHeader_802_11->Duration = RTMPCalcDuration(pAd, MlmeRate, 14);
-			if (pHeader_802_11->FC.SubType == SUBTYPE_PROBE_RSP)
-			{
-				bInsertTimestamp = TRUE;
-			}
-		}
-	}
-
-	pHeader_802_11->Sequence = pAd->Sequence++;
-	if (pAd->Sequence >0xfff)
-		pAd->Sequence = 0;
-
-	// Before radar detection done, mgmt frame can not be sent but probe req
-	// Because we need to use probe req to trigger driver to send probe req in passive scan
-	if ((pHeader_802_11->FC.SubType != SUBTYPE_PROBE_REQ)
-		&& (pAd->CommonCfg.bIEEE80211H == 1)
-		&& (pAd->CommonCfg.RadarDetect.RDMode != RD_NORMAL_MODE))
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("MlmeHardTransmit --> radar detect not in normal mode !!!\n"));
-//		if (!IrqState)
-			RTMP_SEM_UNLOCK(&pAd->MgmtRingLock);
-		return (NDIS_STATUS_FAILURE);
-	}
-
-#ifdef RT_BIG_ENDIAN
-	RTMPFrameEndianChange(pAd, (PUCHAR)pHeader_802_11, DIR_WRITE, FALSE);
-#endif
-
-	//
-	// fill scatter-and-gather buffer list into TXD. Internally created NDIS PACKET
-	// should always has only one ohysical buffer, and the whole frame size equals
-	// to the first scatter buffer size
-	//
-
-	// Initialize TX Descriptor
-	// For inter-frame gap, the number is for this frame and next frame
-	// For MLME rate, we will fix as 2Mb to match other vendor's implement
-//	pAd->CommonCfg.MlmeTransmit.field.MODE = 1;
-
-// management frame doesn't need encryption. so use RESERVED_WCID no matter u are sending to specific wcid or not.
-	if (pMacEntry == NULL)
-	{
-		RTMPWriteTxWI(pAd, pFirstTxWI, FALSE, FALSE, bInsertTimestamp, FALSE, bAckRequired, FALSE,
-		0, RESERVED_WCID, (SrcBufLen - TXINFO_SIZE - TXWI_SIZE), PID_MGMT, 0,  (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_BACKOFF, FALSE, &pAd->CommonCfg.MlmeTransmit);
-	}
-	else
-	{
-		RTMPWriteTxWI(pAd, pFirstTxWI, FALSE, FALSE,
-					bInsertTimestamp, FALSE, bAckRequired, FALSE,
-					0, pMacEntry->Aid, (SrcBufLen - TXINFO_SIZE - TXWI_SIZE),
-					pMacEntry->MaxHTPhyMode.field.MCS, 0,
-					(UCHAR)pMacEntry->MaxHTPhyMode.field.MCS,
-					IFS_BACKOFF, FALSE, &pMacEntry->MaxHTPhyMode);
-	}
-
-#ifdef RT_BIG_ENDIAN
-	RTMPWIEndianChange((PUCHAR)pFirstTxWI, TYPE_TXWI);
-#endif
-
-	// Now do hardware-depened kick out.
-	HAL_KickOutMgmtTx(pAd, QueIdx, pPacket, pSrcBufVA, SrcBufLen);
-
-	// Make sure to release MGMT ring resource
-//	if (!IrqState)
-		RTMP_SEM_UNLOCK(&pAd->MgmtRingLock);
-	return NDIS_STATUS_SUCCESS;
-}
-
-
-/********************************************************************************
-
-	New DeQueue Procedures.
-
- ********************************************************************************/
-
-#define DEQUEUE_LOCK(lock, bIntContext, IrqFlags) 				\
-			do{													\
-				if (bIntContext == FALSE)						\
-				RTMP_IRQ_LOCK((lock), IrqFlags);		\
-			}while(0)
-
-#define DEQUEUE_UNLOCK(lock, bIntContext, IrqFlags)				\
-			do{													\
-				if (bIntContext == FALSE)						\
-					RTMP_IRQ_UNLOCK((lock), IrqFlags);	\
-			}while(0)
-
-
-/*
-	========================================================================
-	Tx Path design algorithm:
-		Basically, we divide the packets into four types, Broadcast/Multicast, 11N Rate(AMPDU, AMSDU, Normal), B/G Rate(ARALINK, Normal),
-		Specific Packet Type. Following show the classification rule and policy for each kinds of packets.
-				Classification Rule=>
-					Multicast: (*addr1 & 0x01) == 0x01
-					Specific : bDHCPFrame, bARPFrame, bEAPOLFrame, etc.
-					11N Rate : If peer support HT
-								(1).AMPDU  -- If TXBA is negotiated.
-								(2).AMSDU  -- If AMSDU is capable for both peer and ourself.
-											*). AMSDU can embedded in a AMPDU, but now we didn't support it.
-								(3).Normal -- Other packets which send as 11n rate.
-
-					B/G Rate : If peer is b/g only.
-								(1).ARALINK-- If both of peer/us supprot Ralink proprietary Aggregation and the TxRate is large than RATE_6
-								(2).Normal -- Other packets which send as b/g rate.
-					Fragment:
-								The packet must be unicast, NOT A-RALINK, NOT A-MSDU, NOT 11n, then can consider about fragment.
-
-				Classified Packet Handle Rule=>
-					Multicast:
-								No ACK, 		//pTxBlk->bAckRequired = FALSE;
-								No WMM, 		//pTxBlk->bWMM = FALSE;
-								No piggyback,   //pTxBlk->bPiggyBack = FALSE;
-								Force LowRate,  //pTxBlk->bForceLowRate = TRUE;
-					Specific :	Basically, for specific packet, we should handle it specifically, but now all specific packets are use
-									the same policy to handle it.
-								Force LowRate,  //pTxBlk->bForceLowRate = TRUE;
-
-					11N Rate :
-								No piggyback,	//pTxBlk->bPiggyBack = FALSE;
-
-								(1).AMSDU
-									pTxBlk->bWMM = TRUE;
-								(2).AMPDU
-									pTxBlk->bWMM = TRUE;
-								(3).Normal
-
-					B/G Rate :
-								(1).ARALINK
-
-								(2).Normal
-	========================================================================
-*/
-static UCHAR TxPktClassification(
-	IN RTMP_ADAPTER *pAd,
-	IN PNDIS_PACKET  pPacket)
-{
-	UCHAR			TxFrameType = TX_UNKOWN_FRAME;
-	UCHAR			Wcid;
-	MAC_TABLE_ENTRY	*pMacEntry = NULL;
-#ifdef DOT11_N_SUPPORT
-	BOOLEAN			bHTRate = FALSE;
-#endif // DOT11_N_SUPPORT //
-
-	Wcid = RTMP_GET_PACKET_WCID(pPacket);
-	if (Wcid == MCAST_WCID)
-	{	// Handle for RA is Broadcast/Multicast Address.
-		return TX_MCAST_FRAME;
-	}
-
-	// Handle for unicast packets
-	pMacEntry = &pAd->MacTab.Content[Wcid];
-	if (RTMP_GET_PACKET_LOWRATE(pPacket))
-	{	// It's a specific packet need to force low rate, i.e., bDHCPFrame, bEAPOLFrame, bWAIFrame
-		TxFrameType = TX_LEGACY_FRAME;
-	}
-#ifdef DOT11_N_SUPPORT
-	else if (IS_HT_RATE(pMacEntry))
-	{	// it's a 11n capable packet
-
-		// Depends on HTPhyMode to check if the peer support the HTRate transmission.
-		// 	Currently didn't support A-MSDU embedded in A-MPDU
-		bHTRate = TRUE;
-		if (RTMP_GET_PACKET_MOREDATA(pPacket) || (pMacEntry->PsMode == PWR_SAVE))
-			TxFrameType = TX_LEGACY_FRAME;
-#ifdef UAPSD_AP_SUPPORT
-		else if (RTMP_GET_PACKET_EOSP(pPacket))
-			TxFrameType = TX_LEGACY_FRAME;
-#endif // UAPSD_AP_SUPPORT //
-		else if((pMacEntry->TXBAbitmap & (1<<(RTMP_GET_PACKET_UP(pPacket)))) != 0)
-			return TX_AMPDU_FRAME;
-		else if(CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_AMSDU_INUSED))
-			return TX_AMSDU_FRAME;
-		else
-			TxFrameType = TX_LEGACY_FRAME;
-	}
-#endif // DOT11_N_SUPPORT //
-	else
-	{	// it's a legacy b/g packet.
-		if ((CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_AGGREGATION_CAPABLE) && pAd->CommonCfg.bAggregationCapable) &&
-			(RTMP_GET_PACKET_TXRATE(pPacket) >= RATE_6) &&
-			(!(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) && CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_WMM_CAPABLE))))
-		{	// if peer support Ralink Aggregation, we use it.
-			TxFrameType = TX_RALINK_FRAME;
-		}
-		else
-		{
-			TxFrameType = TX_LEGACY_FRAME;
-		}
-	}
-
-	// Currently, our fragment only support when a unicast packet send as NOT-ARALINK, NOT-AMSDU and NOT-AMPDU.
-	if ((RTMP_GET_PACKET_FRAGMENTS(pPacket) > 1) && (TxFrameType == TX_LEGACY_FRAME))
-		TxFrameType = TX_FRAG_FRAME;
-
-	return TxFrameType;
-}
-
-
-BOOLEAN RTMP_FillTxBlkInfo(
-	IN RTMP_ADAPTER *pAd,
-	IN TX_BLK *pTxBlk)
-{
-	PACKET_INFO			PacketInfo;
-	PNDIS_PACKET		pPacket;
-	PMAC_TABLE_ENTRY	pMacEntry = NULL;
-
-	pPacket = pTxBlk->pPacket;
-	RTMP_QueryPacketInfo(pPacket, &PacketInfo, &pTxBlk->pSrcBufHeader, &pTxBlk->SrcBufLen);
-
-	pTxBlk->Wcid	 	 		= RTMP_GET_PACKET_WCID(pPacket);
-	pTxBlk->apidx		 		= RTMP_GET_PACKET_IF(pPacket);
-	pTxBlk->UserPriority 		= RTMP_GET_PACKET_UP(pPacket);
-	pTxBlk->FrameGap = IFS_HTTXOP;		// ASIC determine Frame Gap
-
-	if (RTMP_GET_PACKET_CLEAR_EAP_FRAME(pTxBlk->pPacket))
-		TX_BLK_SET_FLAG(pTxBlk, fTX_bClearEAPFrame);
-	else
-		TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bClearEAPFrame);
-
-	// Default to clear this flag
-	TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bForceNonQoS);
-
-
-	if (pTxBlk->Wcid == MCAST_WCID)
-	{
-		pTxBlk->pMacEntry = NULL;
-		{
-#ifdef MCAST_RATE_SPECIFIC
-			PUCHAR pDA = GET_OS_PKT_DATAPTR(pPacket);
-			if (((*pDA & 0x01) == 0x01) && (*pDA != 0xff))
-				pTxBlk->pTransmit = &pAd->CommonCfg.MCastPhyMode;
-			else
-#endif // MCAST_RATE_SPECIFIC //
-				pTxBlk->pTransmit = &pAd->MacTab.Content[MCAST_WCID].HTPhyMode;
-		}
-
-		TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bAckRequired);	// AckRequired = FALSE, when broadcast packet in Adhoc mode.
-		//TX_BLK_SET_FLAG(pTxBlk, fTX_bForceLowRate);
-		TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bAllowFrag);
-		TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bWMM);
-		if (RTMP_GET_PACKET_MOREDATA(pPacket))
-		{
-			TX_BLK_SET_FLAG(pTxBlk, fTX_bMoreData);
-		}
-
-	}
-	else
-	{
-		pTxBlk->pMacEntry = &pAd->MacTab.Content[pTxBlk->Wcid];
-		pTxBlk->pTransmit = &pTxBlk->pMacEntry->HTPhyMode;
-
-		pMacEntry = pTxBlk->pMacEntry;
-
-
-		// For all unicast packets, need Ack unless the Ack Policy is not set as NORMAL_ACK.
-		if (pAd->CommonCfg.AckPolicy[pTxBlk->QueIdx] != NORMAL_ACK)
-			TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bAckRequired);
-		else
-			TX_BLK_SET_FLAG(pTxBlk, fTX_bAckRequired);
-
-		{
-
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			{
-
-				// If support WMM, enable it.
-				if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) &&
-					CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_WMM_CAPABLE))
-					TX_BLK_SET_FLAG(pTxBlk, fTX_bWMM);
-
-//				if (pAd->StaCfg.bAutoTxRateSwitch)
-//					TX_BLK_SET_FLAG(pTxBlk, fTX_AutoRateSwitch);
-			}
-#endif // CONFIG_STA_SUPPORT //
-		}
-
-		if (pTxBlk->TxFrameType == TX_LEGACY_FRAME)
-		{
-			if ( (RTMP_GET_PACKET_LOWRATE(pPacket)) ||
-                ((pAd->OpMode == OPMODE_AP) && (pMacEntry->MaxHTPhyMode.field.MODE == MODE_CCK) && (pMacEntry->MaxHTPhyMode.field.MCS == RATE_1)))
-			{	// Specific packet, i.e., bDHCPFrame, bEAPOLFrame, bWAIFrame, need force low rate.
-				pTxBlk->pTransmit = &pAd->MacTab.Content[MCAST_WCID].HTPhyMode;
-#ifdef DOT11_N_SUPPORT
-				// Modify the WMM bit for ICV issue. If we have a packet with EOSP field need to set as 1, how to handle it???
-				if (IS_HT_STA(pTxBlk->pMacEntry) &&
-					(CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_RALINK_CHIPSET)) &&
-					((pAd->CommonCfg.bRdg == TRUE) && CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_RDG_CAPABLE)))
-				{
-					TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bWMM);
-					TX_BLK_SET_FLAG(pTxBlk, fTX_bForceNonQoS);
-				}
-#endif // DOT11_N_SUPPORT //
-			}
-
-#ifdef DOT11_N_SUPPORT
-			if ( (IS_HT_RATE(pMacEntry) == FALSE) &&
-				(CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_PIGGYBACK_CAPABLE)))
-			{	// Currently piggy-back only support when peer is operate in b/g mode.
-				TX_BLK_SET_FLAG(pTxBlk, fTX_bPiggyBack);
-			}
-#endif // DOT11_N_SUPPORT //
-
-			if (RTMP_GET_PACKET_MOREDATA(pPacket))
-			{
-				TX_BLK_SET_FLAG(pTxBlk, fTX_bMoreData);
-			}
-#ifdef UAPSD_AP_SUPPORT
-			if (RTMP_GET_PACKET_EOSP(pPacket))
-			{
-				TX_BLK_SET_FLAG(pTxBlk, fTX_bWMM_UAPSD_EOSP);
-			}
-#endif // UAPSD_AP_SUPPORT //
-		}
-		else if (pTxBlk->TxFrameType == TX_FRAG_FRAME)
-		{
-			TX_BLK_SET_FLAG(pTxBlk, fTX_bAllowFrag);
-		}
-
-		pMacEntry->DebugTxCount++;
-	}
-
-	return TRUE;
-
-FillTxBlkErr:
-	return FALSE;
-}
-
-
-BOOLEAN CanDoAggregateTransmit(
-	IN RTMP_ADAPTER *pAd,
-	IN NDIS_PACKET *pPacket,
-	IN TX_BLK		*pTxBlk)
-{
-
-	//printk("Check if can do aggregation! TxFrameType=%d!\n", pTxBlk->TxFrameType);
-
-	if (RTMP_GET_PACKET_WCID(pPacket) == MCAST_WCID)
-		return FALSE;
-
-	if (RTMP_GET_PACKET_DHCP(pPacket) ||
-		RTMP_GET_PACKET_EAPOL(pPacket) ||
-		RTMP_GET_PACKET_WAI(pPacket))
-		return FALSE;
-
-	if ((pTxBlk->TxFrameType == TX_AMSDU_FRAME) &&
-		((pTxBlk->TotalFrameLen + GET_OS_PKT_LEN(pPacket))> (RX_BUFFER_AGGRESIZE - 100)))
-	{	// For AMSDU, allow the packets with total length < max-amsdu size
-		return FALSE;
-	}
-
-	if ((pTxBlk->TxFrameType == TX_RALINK_FRAME) &&
-		(pTxBlk->TxPacketList.Number == 2))
-	{	// For RALINK-Aggregation, allow two frames in one batch.
-		return FALSE;
-	}
-
-#ifdef CONFIG_STA_SUPPORT
-	if ((INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA)) // must be unicast to AP
-		return TRUE;
-	else
-#endif // CONFIG_STA_SUPPORT //
-		return FALSE;
-
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		To do the enqueue operation and extract the first item of waiting
-		list. If a number of available shared memory segments could meet
-		the request of extracted item, the extracted item will be fragmented
-		into shared memory segments.
-
-	Arguments:
-		pAd Pointer to our adapter
-		pQueue		Pointer to Waiting Queue
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID RTMPDeQueuePacket(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  BOOLEAN         bIntContext,
-	IN  UCHAR			QIdx, /* BulkOutPipeId */
-	IN  UCHAR           Max_Tx_Packets)
-{
-	PQUEUE_ENTRY    pEntry = NULL;
-	PNDIS_PACKET 	pPacket;
-	NDIS_STATUS     Status = NDIS_STATUS_SUCCESS;
-	UCHAR           Count=0;
-	PQUEUE_HEADER   pQueue;
-	ULONG           FreeNumber[NUM_OF_TX_RING];
-	UCHAR			QueIdx, sQIdx, eQIdx;
-	unsigned long	IrqFlags = 0;
-	BOOLEAN			hasTxDesc = FALSE;
-	TX_BLK			TxBlk;
-	TX_BLK			*pTxBlk;
-
-#ifdef DBG_DIAGNOSE
-	BOOLEAN			firstRound;
-	RtmpDiagStruct	*pDiagStruct = &pAd->DiagStruct;
-#endif
-
-
-	if (QIdx == NUM_OF_TX_RING)
-	{
-		sQIdx = 0;
-//PS packets use HCCA queue when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA)
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		eQIdx = 3;	// 4 ACs, start from 0.
-#endif // CONFIG_STA_SUPPORT //
-	}
-	else
-	{
-		sQIdx = eQIdx = QIdx;
-	}
-
-	for (QueIdx=sQIdx; QueIdx <= eQIdx; QueIdx++)
-	{
-		Count=0;
-
-		RT28XX_START_DEQUEUE(pAd, QueIdx, IrqFlags);
-
-#ifdef DBG_DIAGNOSE
-		firstRound = ((QueIdx == 0) ? TRUE : FALSE);
-#endif // DBG_DIAGNOSE //
-
-		while (1)
-		{
-			if ((RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS |
-										fRTMP_ADAPTER_RADIO_OFF |
-										fRTMP_ADAPTER_RESET_IN_PROGRESS |
-										fRTMP_ADAPTER_HALT_IN_PROGRESS |
-										fRTMP_ADAPTER_NIC_NOT_EXIST))))
-			{
-				RT28XX_STOP_DEQUEUE(pAd, QueIdx, IrqFlags);
-				return;
-			}
-
-			if (Count >= Max_Tx_Packets)
-				break;
-
-			DEQUEUE_LOCK(&pAd->irq_lock, bIntContext, IrqFlags);
-			if (&pAd->TxSwQueue[QueIdx] == NULL)
-			{
-#ifdef DBG_DIAGNOSE
-				if (firstRound == TRUE)
-					pDiagStruct->TxSWQueCnt[pDiagStruct->ArrayCurIdx][0]++;
-#endif // DBG_DIAGNOSE //
-				DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
-				break;
-			}
-
-
-			// probe the Queue Head
-			pQueue = &pAd->TxSwQueue[QueIdx];
-			if ((pEntry = pQueue->Head) == NULL)
-			{
-				DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
-				break;
-			}
-
-			pTxBlk = &TxBlk;
-			NdisZeroMemory((PUCHAR)pTxBlk, sizeof(TX_BLK));
-			//InitializeQueueHeader(&pTxBlk->TxPacketList);		// Didn't need it because we already memzero it.
-			pTxBlk->QueIdx = QueIdx;
-
-			pPacket = QUEUE_ENTRY_TO_PKT(pEntry);
-
-			// Early check to make sure we have enoguh Tx Resource.
-			hasTxDesc = RT28XX_HAS_ENOUGH_FREE_DESC(pAd, pTxBlk, FreeNumber[QueIdx], pPacket);
-			if (!hasTxDesc)
-			{
-				pAd->PrivateInfo.TxRingFullCnt++;
-
-				DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
-
-				break;
-			}
-
-			pTxBlk->TxFrameType = TxPktClassification(pAd, pPacket);
-			pEntry = RemoveHeadQueue(pQueue);
-			pTxBlk->TotalFrameNum++;
-			pTxBlk->TotalFragNum += RTMP_GET_PACKET_FRAGMENTS(pPacket);	// The real fragment number maybe vary
-			pTxBlk->TotalFrameLen += GET_OS_PKT_LEN(pPacket);
-			pTxBlk->pPacket = pPacket;
-			InsertTailQueue(&pTxBlk->TxPacketList, PACKET_TO_QUEUE_ENTRY(pPacket));
-
-			if (pTxBlk->TxFrameType == TX_RALINK_FRAME || pTxBlk->TxFrameType == TX_AMSDU_FRAME)
-			{
-				// Enhance SW Aggregation Mechanism
-				if (NEED_QUEUE_BACK_FOR_AGG(pAd, QueIdx, FreeNumber[QueIdx], pTxBlk->TxFrameType))
-				{
-					InsertHeadQueue(pQueue, PACKET_TO_QUEUE_ENTRY(pPacket));
-					DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
-					break;
-				}
-
-				do{
-					if((pEntry = pQueue->Head) == NULL)
-						break;
-
-					// For TX_AMSDU_FRAME/TX_RALINK_FRAME, Need to check if next pakcet can do aggregation.
-					pPacket = QUEUE_ENTRY_TO_PKT(pEntry);
-					FreeNumber[QueIdx] = GET_TXRING_FREENO(pAd, QueIdx);
-					hasTxDesc = RT28XX_HAS_ENOUGH_FREE_DESC(pAd, pTxBlk, FreeNumber[QueIdx], pPacket);
-					if ((hasTxDesc == FALSE) || (CanDoAggregateTransmit(pAd, pPacket, pTxBlk) == FALSE))
-						break;
-
-					//Remove the packet from the TxSwQueue and insert into pTxBlk
-					pEntry = RemoveHeadQueue(pQueue);
-					ASSERT(pEntry);
-					pPacket = QUEUE_ENTRY_TO_PKT(pEntry);
-					pTxBlk->TotalFrameNum++;
-					pTxBlk->TotalFragNum += RTMP_GET_PACKET_FRAGMENTS(pPacket);	// The real fragment number maybe vary
-					pTxBlk->TotalFrameLen += GET_OS_PKT_LEN(pPacket);
-					InsertTailQueue(&pTxBlk->TxPacketList, PACKET_TO_QUEUE_ENTRY(pPacket));
-				}while(1);
-
-				if (pTxBlk->TxPacketList.Number == 1)
-					pTxBlk->TxFrameType = TX_LEGACY_FRAME;
-			}
-
-#ifdef RT2870
-			DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
-#endif // RT2870 //
-
-			Count += pTxBlk->TxPacketList.Number;
-
-				// Do HardTransmit now.
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				Status = STAHardTransmit(pAd, pTxBlk, QueIdx);
-#endif // CONFIG_STA_SUPPORT //
-		}
-
-		RT28XX_STOP_DEQUEUE(pAd, QueIdx, IrqFlags);
-
-#ifdef RT2870
-		if (!hasTxDesc)
-			RTUSBKickBulkOut(pAd);
-#endif // RT2870 //
-
-#ifdef BLOCK_NET_IF
-		if ((pAd->blockQueueTab[QueIdx].SwTxQueueBlockFlag == TRUE)
-			&& (pAd->TxSwQueue[QueIdx].Number < 1))
-		{
-			releaseNetIf(&pAd->blockQueueTab[QueIdx]);
-		}
-#endif // BLOCK_NET_IF //
-
-	}
-
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Calculates the duration which is required to transmit out frames
-	with given size and specified rate.
-
-	Arguments:
-		pAd 	Pointer to our adapter
-		Rate			Transmit rate
-		Size			Frame size in units of byte
-
-	Return Value:
-		Duration number in units of usec
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-USHORT	RTMPCalcDuration(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			Rate,
-	IN	ULONG			Size)
-{
-	ULONG	Duration = 0;
-
-	if (Rate < RATE_FIRST_OFDM_RATE) // CCK
-	{
-		if ((Rate > RATE_1) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED))
-			Duration = 96;	// 72+24 preamble+plcp
-		else
-			Duration = 192; // 144+48 preamble+plcp
-
-		Duration += (USHORT)((Size << 4) / RateIdTo500Kbps[Rate]);
-		if ((Size << 4) % RateIdTo500Kbps[Rate])
-			Duration ++;
-	}
-	else if (Rate <= RATE_LAST_OFDM_RATE)// OFDM rates
-	{
-		Duration = 20 + 6;		// 16+4 preamble+plcp + Signal Extension
-		Duration += 4 * (USHORT)((11 + Size * 4) / RateIdTo500Kbps[Rate]);
-		if ((11 + Size * 4) % RateIdTo500Kbps[Rate])
-			Duration += 4;
-	}
-	else	//mimo rate
-	{
-		Duration = 20 + 6;		// 16+4 preamble+plcp + Signal Extension
-	}
-
-	return (USHORT)Duration;
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Calculates the duration which is required to transmit out frames
-	with given size and specified rate.
-
-	Arguments:
-		pTxWI		Pointer to head of each MPDU to HW.
-		Ack 		Setting for Ack requirement bit
-		Fragment	Setting for Fragment bit
-		RetryMode	Setting for retry mode
-		Ifs 		Setting for IFS gap
-		Rate		Setting for transmit rate
-		Service 	Setting for service
-		Length		Frame length
-		TxPreamble	Short or Long preamble when using CCK rates
-		QueIdx - 0-3, according to 802.11e/d4.4 June/2003
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-    See also : BASmartHardTransmit()    !!!
-
-	========================================================================
-*/
-VOID RTMPWriteTxWI(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PTXWI_STRUC 	pOutTxWI,
-	IN	BOOLEAN			FRAG,
-	IN	BOOLEAN			CFACK,
-	IN	BOOLEAN			InsTimestamp,
-	IN	BOOLEAN 		AMPDU,
-	IN	BOOLEAN 		Ack,
-	IN	BOOLEAN 		NSeq,		// HW new a sequence.
-	IN	UCHAR			BASize,
-	IN	UCHAR			WCID,
-	IN	ULONG			Length,
-	IN	UCHAR 			PID,
-	IN	UCHAR			TID,
-	IN	UCHAR			TxRate,
-	IN	UCHAR			Txopmode,
-	IN	BOOLEAN			CfAck,
-	IN	HTTRANSMIT_SETTING	*pTransmit)
-{
-	PMAC_TABLE_ENTRY	pMac = NULL;
-	TXWI_STRUC 		TxWI;
-	PTXWI_STRUC 	pTxWI;
-
-	if (WCID < MAX_LEN_OF_MAC_TABLE)
-		pMac = &pAd->MacTab.Content[WCID];
-
-	//
-	// Always use Long preamble before verifiation short preamble functionality works well.
-	// Todo: remove the following line if short preamble functionality works
-	//
-	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
-	NdisZeroMemory(&TxWI, TXWI_SIZE);
-	pTxWI = &TxWI;
-
-	pTxWI->FRAG= FRAG;
-
-	pTxWI->CFACK = CFACK;
-	pTxWI->TS= InsTimestamp;
-	pTxWI->AMPDU = AMPDU;
-	pTxWI->ACK = Ack;
-	pTxWI->txop= Txopmode;
-
-	pTxWI->NSEQ = NSeq;
-	// John tune the performace with Intel Client in 20 MHz performance
-#ifdef DOT11_N_SUPPORT
-	BASize = pAd->CommonCfg.TxBASize;
-
-	if( BASize >7 )
-		BASize =7;
-	pTxWI->BAWinSize = BASize;
-	pTxWI->ShortGI = pTransmit->field.ShortGI;
-	pTxWI->STBC = pTransmit->field.STBC;
-#endif // DOT11_N_SUPPORT //
-
-	pTxWI->WirelessCliID = WCID;
-	pTxWI->MPDUtotalByteCount = Length;
-	pTxWI->PacketId = PID;
-
-	// If CCK or OFDM, BW must be 20
-	pTxWI->BW = (pTransmit->field.MODE <= MODE_OFDM) ? (BW_20) : (pTransmit->field.BW);
-#ifdef DOT11N_DRAFT3
-	if (pTxWI->BW)
-		pTxWI->BW = (pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth == 0) ? (BW_20) : (pTransmit->field.BW);
-#endif // DOT11N_DRAFT3 //
-
-	pTxWI->MCS = pTransmit->field.MCS;
-	pTxWI->PHYMODE = pTransmit->field.MODE;
-	pTxWI->CFACK = CfAck;
-
-#ifdef DOT11_N_SUPPORT
-	if (pMac)
-	{
-		if (pAd->CommonCfg.bMIMOPSEnable)
-		{
-			if ((pMac->MmpsMode == MMPS_DYNAMIC) && (pTransmit->field.MCS > 7))
-			{
-				// Dynamic MIMO Power Save Mode
-				pTxWI->MIMOps = 1;
-			}
-			else if (pMac->MmpsMode == MMPS_STATIC)
-			{
-				// Static MIMO Power Save Mode
-				if (pTransmit->field.MODE >= MODE_HTMIX && pTransmit->field.MCS > 7)
-				{
-					pTxWI->MCS = 7;
-					pTxWI->MIMOps = 0;
-				}
-			}
-		}
-		//pTxWI->MIMOps = (pMac->PsMode == PWR_MMPS)? 1:0;
-		if (pMac->bIAmBadAtheros && (pMac->WepStatus != Ndis802_11WEPDisabled))
-		{
-			pTxWI->MpduDensity = 7;
-		}
-		else
-		{
-			pTxWI->MpduDensity = pMac->MpduDensity;
-		}
-	}
-#endif // DOT11_N_SUPPORT //
-
-	pTxWI->PacketId = pTxWI->MCS;
-	NdisMoveMemory(pOutTxWI, &TxWI, sizeof(TXWI_STRUC));
-}
-
-
-VOID RTMPWriteTxWI_Data(
-	IN	PRTMP_ADAPTER		pAd,
-	IN	OUT PTXWI_STRUC		pTxWI,
-	IN	TX_BLK				*pTxBlk)
-{
-	HTTRANSMIT_SETTING	*pTransmit;
-	PMAC_TABLE_ENTRY	pMacEntry;
-#ifdef DOT11_N_SUPPORT
-	UCHAR				BASize;
-#endif // DOT11_N_SUPPORT //
-
-
-	ASSERT(pTxWI);
-
-	pTransmit = pTxBlk->pTransmit;
-	pMacEntry = pTxBlk->pMacEntry;
-
-
-	//
-	// Always use Long preamble before verifiation short preamble functionality works well.
-	// Todo: remove the following line if short preamble functionality works
-	//
-	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
-	NdisZeroMemory(pTxWI, TXWI_SIZE);
-
-	pTxWI->FRAG		= TX_BLK_TEST_FLAG(pTxBlk, fTX_bAllowFrag);
-	pTxWI->ACK		= TX_BLK_TEST_FLAG(pTxBlk, fTX_bAckRequired);
-	pTxWI->txop		= pTxBlk->FrameGap;
-
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-	if (pMacEntry &&
-		(pAd->StaCfg.BssType == BSS_INFRA) &&
-		(pMacEntry->ValidAsDls == TRUE))
-		pTxWI->WirelessCliID = BSSID_WCID;
-	else
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-		pTxWI->WirelessCliID		= pTxBlk->Wcid;
-
-	pTxWI->MPDUtotalByteCount	= pTxBlk->MpduHeaderLen + pTxBlk->SrcBufLen;
-	pTxWI->CFACK				= TX_BLK_TEST_FLAG(pTxBlk, fTX_bPiggyBack);
-
-	// If CCK or OFDM, BW must be 20
-	pTxWI->BW = (pTransmit->field.MODE <= MODE_OFDM) ? (BW_20) : (pTransmit->field.BW);
-#ifdef DOT11_N_SUPPORT
-#ifdef DOT11N_DRAFT3
-	if (pTxWI->BW)
-		pTxWI->BW = (pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth == 0) ? (BW_20) : (pTransmit->field.BW);
-#endif // DOT11N_DRAFT3 //
-	pTxWI->AMPDU	= ((pTxBlk->TxFrameType == TX_AMPDU_FRAME) ? TRUE : FALSE);
-
-	// John tune the performace with Intel Client in 20 MHz performance
-	BASize = pAd->CommonCfg.TxBASize;
-	if((pTxBlk->TxFrameType == TX_AMPDU_FRAME) && (pMacEntry))
-	{
-		UCHAR		RABAOriIdx = 0;	//The RA's BA Originator table index.
-
-		RABAOriIdx = pTxBlk->pMacEntry->BAOriWcidArray[pTxBlk->UserPriority];
-		BASize = pAd->BATable.BAOriEntry[RABAOriIdx].BAWinSize;
-	}
-
-	pTxWI->TxBF = pTransmit->field.TxBF;
-	pTxWI->BAWinSize = BASize;
-	pTxWI->ShortGI = pTransmit->field.ShortGI;
-	pTxWI->STBC = pTransmit->field.STBC;
-#endif // DOT11_N_SUPPORT //
-
-	pTxWI->MCS = pTransmit->field.MCS;
-	pTxWI->PHYMODE = pTransmit->field.MODE;
-
-#ifdef DOT11_N_SUPPORT
-	if (pMacEntry)
-	{
-		if ((pMacEntry->MmpsMode == MMPS_DYNAMIC) && (pTransmit->field.MCS > 7))
-		{
-			// Dynamic MIMO Power Save Mode
-			pTxWI->MIMOps = 1;
-		}
-		else if (pMacEntry->MmpsMode == MMPS_STATIC)
-		{
-			// Static MIMO Power Save Mode
-			if (pTransmit->field.MODE >= MODE_HTMIX && pTransmit->field.MCS > 7)
-			{
-				pTxWI->MCS = 7;
-				pTxWI->MIMOps = 0;
-			}
-		}
-
-		if (pMacEntry->bIAmBadAtheros && (pMacEntry->WepStatus != Ndis802_11WEPDisabled))
-		{
-			pTxWI->MpduDensity = 7;
-		}
-		else
-		{
-			pTxWI->MpduDensity = pMacEntry->MpduDensity;
-		}
-	}
-#endif // DOT11_N_SUPPORT //
-
-#ifdef DBG_DIAGNOSE
-		if (pTxBlk->QueIdx== 0)
-		{
-			pAd->DiagStruct.TxDataCnt[pAd->DiagStruct.ArrayCurIdx]++;
-			pAd->DiagStruct.TxMcsCnt[pAd->DiagStruct.ArrayCurIdx][pTxWI->MCS]++;
-		}
-#endif // DBG_DIAGNOSE //
-
-	// for rate adapation
-	pTxWI->PacketId = pTxWI->MCS;
-#ifdef INF_AMAZON_SE
-/*Iverson patch for WMM A5-T07 ,WirelessStaToWirelessSta do not bulk out aggregate */
-	if( RTMP_GET_PACKET_NOBULKOUT(pTxBlk->pPacket))
-	{
-		if(pTxWI->PHYMODE == MODE_CCK)
-		{
-			pTxWI->PacketId = 6;
-		}
-	}
-#endif // INF_AMAZON_SE //
-}
-
-
-VOID RTMPWriteTxWI_Cache(
-	IN	PRTMP_ADAPTER		pAd,
-	IN	OUT PTXWI_STRUC		pTxWI,
-	IN	TX_BLK				*pTxBlk)
-{
-	PHTTRANSMIT_SETTING	/*pTxHTPhyMode,*/ pTransmit;
-	PMAC_TABLE_ENTRY	pMacEntry;
-
-	//
-	// update TXWI
-	//
-	pMacEntry = pTxBlk->pMacEntry;
-	pTransmit = pTxBlk->pTransmit;
-
-	//if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED))
-	//if (RTMPCheckEntryEnableAutoRateSwitch(pAd, pMacEntry))
-	//if (TX_BLK_TEST_FLAG(pTxBlk, fTX_AutoRateSwitch))
-	if (pMacEntry->bAutoTxRateSwitch)
-	{
-		pTxWI->txop = IFS_HTTXOP;
-
-		// If CCK or OFDM, BW must be 20
-		pTxWI->BW = (pTransmit->field.MODE <= MODE_OFDM) ? (BW_20) : (pTransmit->field.BW);
-		pTxWI->ShortGI = pTransmit->field.ShortGI;
-		pTxWI->STBC = pTransmit->field.STBC;
-
-		pTxWI->MCS = pTransmit->field.MCS;
-		pTxWI->PHYMODE = pTransmit->field.MODE;
-
-		// set PID for TxRateSwitching
-		pTxWI->PacketId = pTransmit->field.MCS;
-	}
-
-#ifdef DOT11_N_SUPPORT
-	pTxWI->AMPDU = ((pMacEntry->NoBADataCountDown == 0) ? TRUE: FALSE);
-	pTxWI->MIMOps = 0;
-
-#ifdef DOT11N_DRAFT3
-	if (pTxWI->BW)
-		pTxWI->BW = (pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth == 0) ? (BW_20) : (pTransmit->field.BW);
-#endif // DOT11N_DRAFT3 //
-
-	if (pAd->CommonCfg.bMIMOPSEnable)
-	{
-		// MIMO Power Save Mode
-		if ((pMacEntry->MmpsMode == MMPS_DYNAMIC) && (pTransmit->field.MCS > 7))
-		{
-			// Dynamic MIMO Power Save Mode
-			pTxWI->MIMOps = 1;
-		}
-		else if (pMacEntry->MmpsMode == MMPS_STATIC)
-		{
-			// Static MIMO Power Save Mode
-			if ((pTransmit->field.MODE >= MODE_HTMIX) && (pTransmit->field.MCS > 7))
-			{
-				pTxWI->MCS = 7;
-				pTxWI->MIMOps = 0;
-			}
-		}
-	}
-#endif // DOT11_N_SUPPORT //
-
-#ifdef DBG_DIAGNOSE
-	if (pTxBlk->QueIdx== 0)
-	{
-		pAd->DiagStruct.TxDataCnt[pAd->DiagStruct.ArrayCurIdx]++;
-		pAd->DiagStruct.TxMcsCnt[pAd->DiagStruct.ArrayCurIdx][pTxWI->MCS]++;
-	}
-#endif // DBG_DIAGNOSE //
-
-	pTxWI->MPDUtotalByteCount = pTxBlk->MpduHeaderLen + pTxBlk->SrcBufLen;
-
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Calculates the duration which is required to transmit out frames
-	with given size and specified rate.
-
-	Arguments:
-		pTxD		Pointer to transmit descriptor
-		Ack 		Setting for Ack requirement bit
-		Fragment	Setting for Fragment bit
-		RetryMode	Setting for retry mode
-		Ifs 		Setting for IFS gap
-		Rate		Setting for transmit rate
-		Service 	Setting for service
-		Length		Frame length
-		TxPreamble	Short or Long preamble when using CCK rates
-		QueIdx - 0-3, according to 802.11e/d4.4 June/2003
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	========================================================================
-*/
-VOID RTMPWriteTxDescriptor(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PTXD_STRUC		pTxD,
-	IN	BOOLEAN 		bWIV,
-	IN	UCHAR			QueueSEL)
-{
-	//
-	// Always use Long preamble before verifiation short preamble functionality works well.
-	// Todo: remove the following line if short preamble functionality works
-	//
-	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
-
-	pTxD->WIV	= (bWIV) ? 1: 0;
-	pTxD->QSEL= (QueueSEL);
-	if (pAd->bGenOneHCCA == TRUE)
-		pTxD->QSEL= FIFO_HCCA;
-	pTxD->DMADONE = 0;
-}
-
-
-// should be called only when -
-// 1. MEADIA_CONNECTED
-// 2. AGGREGATION_IN_USED
-// 3. Fragmentation not in used
-// 4. either no previous frame (pPrevAddr1=NULL) .OR. previoud frame is aggregatible
-BOOLEAN TxFrameIsAggregatible(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pPrevAddr1,
-	IN	PUCHAR			p8023hdr)
-{
-
-	// can't aggregate EAPOL (802.1x) frame
-	if ((p8023hdr[12] == 0x88) && (p8023hdr[13] == 0x8e))
-		return FALSE;
-
-	// can't aggregate multicast/broadcast frame
-	if (p8023hdr[0] & 0x01)
-		return FALSE;
-
-	if (INFRA_ON(pAd)) // must be unicast to AP
-		return TRUE;
-	else if ((pPrevAddr1 == NULL) || MAC_ADDR_EQUAL(pPrevAddr1, p8023hdr)) // unicast to same STA
-		return TRUE;
-	else
-		return FALSE;
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-	   Check the MSDU Aggregation policy
-	1.HT aggregation is A-MSDU
-	2.legaacy rate aggregation is software aggregation by Ralink.
-
-	Arguments:
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-BOOLEAN PeerIsAggreOn(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	ULONG		   TxRate,
-	IN	PMAC_TABLE_ENTRY pMacEntry)
-{
-	ULONG	AFlags = (fCLIENT_STATUS_AMSDU_INUSED | fCLIENT_STATUS_AGGREGATION_CAPABLE);
-
-	if (pMacEntry != NULL && CLIENT_STATUS_TEST_FLAG(pMacEntry, AFlags))
-	{
-#ifdef DOT11_N_SUPPORT
-		if (pMacEntry->HTPhyMode.field.MODE >= MODE_HTMIX)
-		{
-			return TRUE;
-		}
-#endif // DOT11_N_SUPPORT //
-
-#ifdef AGGREGATION_SUPPORT
-		if (TxRate >= RATE_6 && pAd->CommonCfg.bAggregationCapable && (!(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) && CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_WMM_CAPABLE))))
-		{	// legacy  Ralink Aggregation support
-			return TRUE;
-		}
-#endif // AGGREGATION_SUPPORT //
-	}
-
-	return FALSE;
-
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Check and fine the packet waiting in SW queue with highest priority
-
-	Arguments:
-		pAd Pointer to our adapter
-
-	Return Value:
-		pQueue		Pointer to Waiting Queue
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-PQUEUE_HEADER	RTMPCheckTxSwQueue(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT PUCHAR			pQueIdx)
-{
-
-	ULONG	Number;
-	// 2004-11-15 to be removed. test aggregation only
-//	if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED)) && (*pNumber < 2))
-//		 return NULL;
-
-	Number = pAd->TxSwQueue[QID_AC_BK].Number
-			 + pAd->TxSwQueue[QID_AC_BE].Number
-			 + pAd->TxSwQueue[QID_AC_VI].Number
-			 + pAd->TxSwQueue[QID_AC_VO].Number
-			 + pAd->TxSwQueue[QID_HCCA].Number;
-
-	if (pAd->TxSwQueue[QID_AC_VO].Head != NULL)
-	{
-		*pQueIdx = QID_AC_VO;
-		return (&pAd->TxSwQueue[QID_AC_VO]);
-	}
-	else if (pAd->TxSwQueue[QID_AC_VI].Head != NULL)
-	{
-		*pQueIdx = QID_AC_VI;
-		return (&pAd->TxSwQueue[QID_AC_VI]);
-	}
-	else if (pAd->TxSwQueue[QID_AC_BE].Head != NULL)
-	{
-		*pQueIdx = QID_AC_BE;
-		return (&pAd->TxSwQueue[QID_AC_BE]);
-	}
-	else if (pAd->TxSwQueue[QID_AC_BK].Head != NULL)
-	{
-		*pQueIdx = QID_AC_BK;
-		return (&pAd->TxSwQueue[QID_AC_BK]);
-	}
-	else if (pAd->TxSwQueue[QID_HCCA].Head != NULL)
-	{
-		*pQueIdx = QID_HCCA;
-		return (&pAd->TxSwQueue[QID_HCCA]);
-	}
-
-	// No packet pending in Tx Sw queue
-	*pQueIdx = QID_AC_BK;
-
-	return (NULL);
-}
-
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Suspend MSDU transmission
-
-	Arguments:
-		pAd 	Pointer to our adapter
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPSuspendMsduTransmission(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	DBGPRINT(RT_DEBUG_TRACE,("SCANNING, suspend MSDU transmission ...\n"));
-
-
-	//
-	// Before BSS_SCAN_IN_PROGRESS, we need to keep Current R66 value and
-	// use Lowbound as R66 value on ScanNextChannel(...)
-	//
-	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66, &pAd->BbpTuning.R66CurrentValue);
-
-	// set BBP_R66 to 0x30/0x40 when scanning (AsicSwitchChannel will set R66 according to channel when scanning)
-	//RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, (0x26 + GET_LNA_GAIN(pAd)));
-	RTMPSetAGCInitValue(pAd, BW_20);
-
-	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
-	//RTMP_IO_WRITE32(pAd, TX_CNTL_CSR, 0x000f0000);		// abort all TX rings
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Resume MSDU transmission
-
-	Arguments:
-		pAd 	Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID RTMPResumeMsduTransmission(
-	IN	PRTMP_ADAPTER	pAd)
-{
-//    UCHAR			IrqState;
-
-	DBGPRINT(RT_DEBUG_TRACE,("SCAN done, resume MSDU transmission ...\n"));
-
-
-	// After finish BSS_SCAN_IN_PROGRESS, we need to restore Current R66 value
-	// R66 should not be 0
-	if (pAd->BbpTuning.R66CurrentValue == 0)
-	{
-		pAd->BbpTuning.R66CurrentValue = 0x38;
-		DBGPRINT_ERR(("RTMPResumeMsduTransmission, R66CurrentValue=0...\n"));
-	}
-	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, pAd->BbpTuning.R66CurrentValue);
-
-	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
-// sample, for IRQ LOCK to SEM LOCK
-//    IrqState = pAd->irq_disabled;
-//	if (IrqState)
-//		RTMPDeQueuePacket(pAd, TRUE, NUM_OF_TX_RING, MAX_TX_PROCESS);
-//    else
-	RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS);
-}
-
-
-UINT deaggregate_AMSDU_announce(
-	IN	PRTMP_ADAPTER	pAd,
-	PNDIS_PACKET		pPacket,
-	IN	PUCHAR			pData,
-	IN	ULONG			DataSize)
-{
-	USHORT 			PayloadSize;
-	USHORT 			SubFrameSize;
-	PHEADER_802_3 	pAMSDUsubheader;
-	UINT			nMSDU;
-    UCHAR			Header802_3[14];
-
-	PUCHAR			pPayload, pDA, pSA, pRemovedLLCSNAP;
-	PNDIS_PACKET	pClonePacket;
-
-
-
-	nMSDU = 0;
-
-	while (DataSize > LENGTH_802_3)
-	{
-
-		nMSDU++;
-
-		//hex_dump("subheader", pData, 64);
-		pAMSDUsubheader = (PHEADER_802_3)pData;
-		//pData += LENGTH_802_3;
-		PayloadSize = pAMSDUsubheader->Octet[1] + (pAMSDUsubheader->Octet[0]<<8);
-		SubFrameSize = PayloadSize + LENGTH_802_3;
-
-
-		if ((DataSize < SubFrameSize) || (PayloadSize > 1518 ))
-		{
-			break;
-		}
-
-		//printk("%d subframe: Size = %d\n",  nMSDU, PayloadSize);
-
-		pPayload = pData + LENGTH_802_3;
-		pDA = pData;
-		pSA = pData + MAC_ADDR_LEN;
-
-		// convert to 802.3 header
-        CONVERT_TO_802_3(Header802_3, pDA, pSA, pPayload, PayloadSize, pRemovedLLCSNAP);
-
-#ifdef CONFIG_STA_SUPPORT
-		if ((Header802_3[12] == 0x88) && (Header802_3[13] == 0x8E) )
-		{
-		    // avoid local heap overflow, use dyanamic allocation
-		   MLME_QUEUE_ELEM *Elem = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);
-		   memmove(Elem->Msg+(LENGTH_802_11 + LENGTH_802_1_H), pPayload, PayloadSize);
-		   Elem->MsgLen = LENGTH_802_11 + LENGTH_802_1_H + PayloadSize;
-		   WpaEAPOLKeyAction(pAd, Elem);
-		   kfree(Elem);
-		}
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-	        	if (pRemovedLLCSNAP)
-	        	{
-	    			pPayload -= LENGTH_802_3;
-	    			PayloadSize += LENGTH_802_3;
-	    			NdisMoveMemory(pPayload, &Header802_3[0], LENGTH_802_3);
-	        	}
-		}
-#endif // CONFIG_STA_SUPPORT //
-
-		pClonePacket = ClonePacket(pAd, pPacket, pPayload, PayloadSize);
-		if (pClonePacket)
-		{
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pClonePacket, RTMP_GET_PACKET_IF(pPacket));
-#endif // CONFIG_STA_SUPPORT //
-		}
-
-
-		// A-MSDU has padding to multiple of 4 including subframe header.
-		// align SubFrameSize up to multiple of 4
-		SubFrameSize = (SubFrameSize+3)&(~0x3);
-
-
-		if (SubFrameSize > 1528 || SubFrameSize < 32)
-		{
-			break;
-		}
-
-		if (DataSize > SubFrameSize)
-		{
-			pData += SubFrameSize;
-			DataSize -= SubFrameSize;
-		}
-		else
-		{
-			// end of A-MSDU
-			DataSize = 0;
-		}
-	}
-
-	// finally release original rx packet
-	RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);
-
-	return nMSDU;
-}
-
-
-UINT BA_Reorder_AMSDU_Annnounce(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket)
-{
-	PUCHAR			pData;
-	USHORT			DataSize;
-	UINT			nMSDU = 0;
-
-	pData = (PUCHAR) GET_OS_PKT_DATAPTR(pPacket);
-	DataSize = (USHORT) GET_OS_PKT_LEN(pPacket);
-
-	nMSDU = deaggregate_AMSDU_announce(pAd, pPacket, pData, DataSize);
-
-	return nMSDU;
-}
-
-
-/*
-	==========================================================================
-	Description:
-		Look up the MAC address in the MAC table. Return NULL if not found.
-	Return:
-		pEntry - pointer to the MAC entry; NULL is not found
-	==========================================================================
-*/
-MAC_TABLE_ENTRY *MacTableLookup(
-	IN PRTMP_ADAPTER pAd,
-	PUCHAR pAddr)
-{
-	ULONG HashIdx;
-	MAC_TABLE_ENTRY *pEntry = NULL;
-
-	HashIdx = MAC_ADDR_HASH_INDEX(pAddr);
-	pEntry = pAd->MacTab.Hash[HashIdx];
-
-	while (pEntry && (pEntry->ValidAsCLI || pEntry->ValidAsWDS || pEntry->ValidAsApCli || pEntry->ValidAsMesh))
-	{
-		if (MAC_ADDR_EQUAL(pEntry->Addr, pAddr))
-		{
-			break;
-		}
-		else
-			pEntry = pEntry->pNext;
-	}
-
-	return pEntry;
-}
-
-MAC_TABLE_ENTRY *MacTableInsertEntry(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR			pAddr,
-	IN	UCHAR			apidx,
-	IN BOOLEAN	CleanAll)
-{
-	UCHAR HashIdx;
-	int i, FirstWcid;
-	MAC_TABLE_ENTRY *pEntry = NULL, *pCurrEntry;
-//	USHORT	offset;
-//	ULONG	addr;
-
-	// if FULL, return
-	if (pAd->MacTab.Size >= MAX_LEN_OF_MAC_TABLE)
-		return NULL;
-
-	FirstWcid = 1;
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	if (pAd->StaCfg.BssType == BSS_INFRA)
-		FirstWcid = 2;
-#endif // CONFIG_STA_SUPPORT //
-
-	// allocate one MAC entry
-	NdisAcquireSpinLock(&pAd->MacTabLock);
-	for (i = FirstWcid; i< MAX_LEN_OF_MAC_TABLE; i++)   // skip entry#0 so that "entry index == AID" for fast lookup
-	{
-		// pick up the first available vacancy
-		if ((pAd->MacTab.Content[i].ValidAsCLI == FALSE) &&
-			(pAd->MacTab.Content[i].ValidAsWDS == FALSE) &&
-			(pAd->MacTab.Content[i].ValidAsApCli== FALSE) &&
-			(pAd->MacTab.Content[i].ValidAsMesh == FALSE)
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-			&& (pAd->MacTab.Content[i].ValidAsDls == FALSE)
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-			)
-		{
-			pEntry = &pAd->MacTab.Content[i];
-			if (CleanAll == TRUE)
-			{
-				pEntry->MaxSupportedRate = RATE_11;
-				pEntry->CurrTxRate = RATE_11;
-				NdisZeroMemory(pEntry, sizeof(MAC_TABLE_ENTRY));
-				pEntry->PairwiseKey.KeyLen = 0;
-				pEntry->PairwiseKey.CipherAlg = CIPHER_NONE;
-			}
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-			if (apidx >= MIN_NET_DEVICE_FOR_DLS)
-			{
-				pEntry->ValidAsCLI = FALSE;
-				pEntry->ValidAsWDS = FALSE;
-				pEntry->ValidAsApCli = FALSE;
-				pEntry->ValidAsMesh = FALSE;
-				pEntry->ValidAsDls = TRUE;
-				pEntry->isCached = FALSE;
-			}
-			else
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-			{
-
-#ifdef CONFIG_STA_SUPPORT
-				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				{
-					pEntry->ValidAsCLI = TRUE;
-					pEntry->ValidAsWDS = FALSE;
-					pEntry->ValidAsApCli = FALSE;
-					pEntry->ValidAsMesh = FALSE;
-					pEntry->ValidAsDls = FALSE;
-				}
-#endif // CONFIG_STA_SUPPORT //
-			}
-
-			pEntry->bIAmBadAtheros = FALSE;
-			pEntry->pAd = pAd;
-			pEntry->CMTimerRunning = FALSE;
-			pEntry->EnqueueEapolStartTimerRunning = EAPOL_START_DISABLE;
-			pEntry->RSNIE_Len = 0;
-			NdisZeroMemory(pEntry->R_Counter, sizeof(pEntry->R_Counter));
-			pEntry->ReTryCounter = PEER_MSG1_RETRY_TIMER_CTR;
-
-			if (pEntry->ValidAsMesh)
-				pEntry->apidx = (apidx - MIN_NET_DEVICE_FOR_MESH);
-			else if (pEntry->ValidAsApCli)
-				pEntry->apidx = (apidx - MIN_NET_DEVICE_FOR_APCLI);
-			else if (pEntry->ValidAsWDS)
-				pEntry->apidx = (apidx - MIN_NET_DEVICE_FOR_WDS);
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-			else if (pEntry->ValidAsDls)
-				pEntry->apidx = (apidx - MIN_NET_DEVICE_FOR_DLS);
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-			else
-				pEntry->apidx = apidx;
-
-			{
-
-#ifdef CONFIG_STA_SUPPORT
-				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				{
-					pEntry->AuthMode = pAd->StaCfg.AuthMode;
-					pEntry->WepStatus = pAd->StaCfg.WepStatus;
-					pEntry->PrivacyFilter = Ndis802_11PrivFilterAcceptAll;
-				}
-#endif // CONFIG_STA_SUPPORT //
-			}
-
-			pEntry->GTKState = REKEY_NEGOTIATING;
-			pEntry->PairwiseKey.KeyLen = 0;
-			pEntry->PairwiseKey.CipherAlg = CIPHER_NONE;
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-			if (pEntry->ValidAsDls == TRUE)
-				pEntry->PortSecured = WPA_802_1X_PORT_SECURED;
-			else
-#endif //QOS_DLS_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-			pEntry->PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-			pEntry->PMKID_CacheIdx = ENTRY_NOT_FOUND;
-			COPY_MAC_ADDR(pEntry->Addr, pAddr);
-			pEntry->Sst = SST_NOT_AUTH;
-			pEntry->AuthState = AS_NOT_AUTH;
-			pEntry->Aid = (USHORT)i;  //0;
-			pEntry->CapabilityInfo = 0;
-			pEntry->PsMode = PWR_ACTIVE;
-			pEntry->PsQIdleCount = 0;
-			pEntry->NoDataIdleCount = 0;
-			pEntry->ContinueTxFailCnt = 0;
-			InitializeQueueHeader(&pEntry->PsQueue);
-
-
-			pAd->MacTab.Size ++;
-
-			// Add this entry into ASIC RX WCID search table
-			RT28XX_STA_ENTRY_ADD(pAd, pEntry);
-
-
-
-			DBGPRINT(RT_DEBUG_TRACE, ("MacTableInsertEntry - allocate entry #%d, Total= %d\n",i, pAd->MacTab.Size));
-			break;
-		}
-	}
-
-	// add this MAC entry into HASH table
-	if (pEntry)
-	{
-		HashIdx = MAC_ADDR_HASH_INDEX(pAddr);
-		if (pAd->MacTab.Hash[HashIdx] == NULL)
-		{
-			pAd->MacTab.Hash[HashIdx] = pEntry;
-		}
-		else
-		{
-			pCurrEntry = pAd->MacTab.Hash[HashIdx];
-			while (pCurrEntry->pNext != NULL)
-				pCurrEntry = pCurrEntry->pNext;
-			pCurrEntry->pNext = pEntry;
-		}
-	}
-
-	NdisReleaseSpinLock(&pAd->MacTabLock);
-	return pEntry;
-}
-
-/*
-	==========================================================================
-	Description:
-		Delete a specified client from MAC table
-	==========================================================================
- */
-BOOLEAN MacTableDeleteEntry(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT wcid,
-	IN PUCHAR pAddr)
-{
-	USHORT HashIdx;
-	MAC_TABLE_ENTRY *pEntry, *pPrevEntry, *pProbeEntry;
-	BOOLEAN Cancelled;
-	//USHORT	offset;	// unused variable
-	//UCHAR	j;			// unused variable
-
-	if (wcid >= MAX_LEN_OF_MAC_TABLE)
-		return FALSE;
-
-	NdisAcquireSpinLock(&pAd->MacTabLock);
-
-	HashIdx = MAC_ADDR_HASH_INDEX(pAddr);
-	//pEntry = pAd->MacTab.Hash[HashIdx];
-	pEntry = &pAd->MacTab.Content[wcid];
-
-	if (pEntry && (pEntry->ValidAsCLI || pEntry->ValidAsApCli || pEntry->ValidAsWDS || pEntry->ValidAsMesh
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
- 		|| pEntry->ValidAsDls
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-		))
-	{
-		if (MAC_ADDR_EQUAL(pEntry->Addr, pAddr))
-		{
-
-			// Delete this entry from ASIC on-chip WCID Table
-			RT28XX_STA_ENTRY_MAC_RESET(pAd, wcid);
-
-#ifdef DOT11_N_SUPPORT
-			// free resources of BA
-			BASessionTearDownALL(pAd, pEntry->Aid);
-#endif // DOT11_N_SUPPORT //
-
-
-			pPrevEntry = NULL;
-			pProbeEntry = pAd->MacTab.Hash[HashIdx];
-			ASSERT(pProbeEntry);
-
-			// update Hash list
-			do
-			{
-				if (pProbeEntry == pEntry)
-				{
-					if (pPrevEntry == NULL)
-					{
-						pAd->MacTab.Hash[HashIdx] = pEntry->pNext;
-					}
-					else
-					{
-						pPrevEntry->pNext = pEntry->pNext;
-					}
-					break;
-				}
-
-				pPrevEntry = pProbeEntry;
-				pProbeEntry = pProbeEntry->pNext;
-			} while (pProbeEntry);
-
-			// not found !!!
-			ASSERT(pProbeEntry != NULL);
-
-			RT28XX_STA_ENTRY_KEY_DEL(pAd, BSS0, wcid);
-
-
-		if (pEntry->EnqueueEapolStartTimerRunning != EAPOL_START_DISABLE)
-		{
-			RTMPCancelTimer(&pEntry->EnqueueStartForPSKTimer, &Cancelled);
-			pEntry->EnqueueEapolStartTimerRunning = EAPOL_START_DISABLE;
-		}
-
-
-   			NdisZeroMemory(pEntry, sizeof(MAC_TABLE_ENTRY));
-			pAd->MacTab.Size --;
-			DBGPRINT(RT_DEBUG_TRACE, ("MacTableDeleteEntry1 - Total= %d\n", pAd->MacTab.Size));
-		}
-		else
-		{
-			printk("\n%s: Impossible Wcid = %d !!!!!\n", __FUNCTION__, wcid);
-		}
-	}
-
-	NdisReleaseSpinLock(&pAd->MacTabLock);
-
-	//Reset operating mode when no Sta.
-	if (pAd->MacTab.Size == 0)
-	{
-#ifdef DOT11_N_SUPPORT
-		pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode = 0;
-#endif // DOT11_N_SUPPORT //
-		//AsicUpdateProtect(pAd, 0 /*pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode*/, (ALLN_SETPROTECT), TRUE, 0 /*pAd->MacTab.fAnyStationNonGF*/);
-		RT28XX_UPDATE_PROTECT(pAd);  // edit by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet
-	}
-
-	return TRUE;
-}
-
-
-/*
-	==========================================================================
-	Description:
-		This routine reset the entire MAC table. All packets pending in
-		the power-saving queues are freed here.
-	==========================================================================
- */
-VOID MacTableReset(
-	IN  PRTMP_ADAPTER  pAd)
-{
-	int         i;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("MacTableReset\n"));
-	//NdisAcquireSpinLock(&pAd->MacTabLock);
-
-	for (i=1; i<MAX_LEN_OF_MAC_TABLE; i++)
-	{
-		if (pAd->MacTab.Content[i].ValidAsCLI == TRUE)
-	   {
-
-#ifdef DOT11_N_SUPPORT
-			// free resources of BA
-			BASessionTearDownALL(pAd, i);
-#endif // DOT11_N_SUPPORT //
-
-			pAd->MacTab.Content[i].ValidAsCLI = FALSE;
-
-
-
-#ifdef RT2870
-			NdisZeroMemory(pAd->MacTab.Content[i].Addr, 6);
-			RT28XX_STA_ENTRY_MAC_RESET(pAd, i);
-#endif // RT2870 //
-
-			//AsicDelWcidTab(pAd, i);
-		}
-	}
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID AssocParmFill(
-	IN PRTMP_ADAPTER pAd,
-	IN OUT MLME_ASSOC_REQ_STRUCT *AssocReq,
-	IN PUCHAR                     pAddr,
-	IN USHORT                     CapabilityInfo,
-	IN ULONG                      Timeout,
-	IN USHORT                     ListenIntv)
-{
-	COPY_MAC_ADDR(AssocReq->Addr, pAddr);
-	// Add mask to support 802.11b mode only
-	AssocReq->CapabilityInfo = CapabilityInfo & SUPPORTED_CAPABILITY_INFO; // not cf-pollable, not cf-poll-request
-	AssocReq->Timeout = Timeout;
-	AssocReq->ListenIntv = ListenIntv;
-}
-
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID DisassocParmFill(
-	IN PRTMP_ADAPTER pAd,
-	IN OUT MLME_DISASSOC_REQ_STRUCT *DisassocReq,
-	IN PUCHAR pAddr,
-	IN USHORT Reason)
-{
-	COPY_MAC_ADDR(DisassocReq->Addr, pAddr);
-	DisassocReq->Reason = Reason;
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Check the out going frame, if this is an DHCP or ARP datagram
-	will be duplicate another frame at low data rate transmit.
-
-	Arguments:
-		pAd 		Pointer to our adapter
-		pPacket 	Pointer to outgoing Ndis frame
-
-	Return Value:
-		TRUE		To be duplicate at Low data rate transmit. (1mb)
-		FALSE		Do nothing.
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-		MAC header + IP Header + UDP Header
-		  14 Bytes	  20 Bytes
-
-		UDP Header
-		00|01|02|03|04|05|06|07|08|09|10|11|12|13|14|15|
-						Source Port
-		16|17|18|19|20|21|22|23|24|25|26|27|28|29|30|31|
-					Destination Port
-
-		port 0x43 means Bootstrap Protocol, server.
-		Port 0x44 means Bootstrap Protocol, client.
-
-	========================================================================
-*/
-
-BOOLEAN RTMPCheckDHCPFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket)
-{
-	PACKET_INFO 	PacketInfo;
-	ULONG			NumberOfBytesRead = 0;
-	ULONG			CurrentOffset = 0;
-	PVOID			pVirtualAddress = NULL;
-	UINT			NdisBufferLength;
-	PUCHAR			pSrc;
-	USHORT			Protocol;
-	UCHAR			ByteOffset36 = 0;
-	UCHAR			ByteOffset38 = 0;
-	BOOLEAN 		ReadFirstParm = TRUE;
-
-	RTMP_QueryPacketInfo(pPacket, &PacketInfo, (PUCHAR *)&pVirtualAddress, &NdisBufferLength);
-
-	NumberOfBytesRead += NdisBufferLength;
-	pSrc = (PUCHAR) pVirtualAddress;
-	Protocol = *(pSrc + 12) * 256 + *(pSrc + 13);
-
-	//
-	// Check DHCP & BOOTP protocol
-	//
-	while (NumberOfBytesRead <= PacketInfo.TotalPacketLength)
-	{
-		if ((NumberOfBytesRead >= 35) && (ReadFirstParm == TRUE))
-		{
-			CurrentOffset = 35 - (NumberOfBytesRead - NdisBufferLength);
-			ByteOffset36 = *(pSrc + CurrentOffset);
-			ReadFirstParm = FALSE;
-		}
-
-		if (NumberOfBytesRead >= 37)
-		{
-			CurrentOffset = 37 - (NumberOfBytesRead - NdisBufferLength);
-			ByteOffset38 = *(pSrc + CurrentOffset);
-			//End of Read
-			break;
-		}
-		return FALSE;
-	}
-
-	// Check for DHCP & BOOTP protocol
-	if ((ByteOffset36 != 0x44) || (ByteOffset38 != 0x43))
-		{
-		//
-		// 2054 (hex 0806) for ARP datagrams
-		// if this packet is not ARP datagrams, then do nothing
-		// ARP datagrams will also be duplicate at 1mb broadcast frames
-		//
-		if (Protocol != 0x0806 )
-			return FALSE;
-		}
-
-	return TRUE;
-}
-
-
-BOOLEAN RTMPCheckEtherType(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket)
-{
-	USHORT	TypeLen;
-	UCHAR	Byte0, Byte1;
-	PUCHAR	pSrcBuf;
-	UINT32	pktLen;
-	UINT16 	srcPort, dstPort;
-	BOOLEAN	status = TRUE;
-
-
-	pSrcBuf = GET_OS_PKT_DATAPTR(pPacket);
-	pktLen = GET_OS_PKT_LEN(pPacket);
-
-	ASSERT(pSrcBuf);
-
-	RTMP_SET_PACKET_SPECIFIC(pPacket, 0);
-
-	// get Ethernet protocol field
-	TypeLen = (pSrcBuf[12] << 8) + pSrcBuf[13];
-
-	pSrcBuf += LENGTH_802_3;	// Skip the Ethernet Header.
-
-	if (TypeLen <= 1500)
-	{	// 802.3, 802.3 LLC
-		/*
-			DestMAC(6) + SrcMAC(6) + Lenght(2) +
-			DSAP(1) + SSAP(1) + Control(1) +
-			if the DSAP = 0xAA, SSAP=0xAA, Contorl = 0x03, it has a 5-bytes SNAP header.
-				=> + SNAP (5, OriginationID(3) + etherType(2))
-		*/
-		if (pSrcBuf[0] == 0xAA && pSrcBuf[1] == 0xAA && pSrcBuf[2] == 0x03)
-		{
-			Sniff2BytesFromNdisBuffer(pSrcBuf, 6, &Byte0, &Byte1);
-			RTMP_SET_PACKET_LLCSNAP(pPacket, 1);
-			TypeLen = (USHORT)((Byte0 << 8) + Byte1);
-			pSrcBuf += 8; // Skip this LLC/SNAP header
-		}
-		else
-		{
-			//It just has 3-byte LLC header, maybe a legacy ether type frame. we didn't handle it.
-		}
-	}
-
-	// If it's a VLAN packet, get the real Type/Length field.
-	if (TypeLen == 0x8100)
-	{
-		/* 0x8100 means VLAN packets */
-
-		/* Dest. MAC Address (6-bytes) +
-		   Source MAC Address (6-bytes) +
-		   Length/Type = 802.1Q Tag Type (2-byte) +
-		   Tag Control Information (2-bytes) +
-		   Length / Type (2-bytes) +
-		   data payload (0-n bytes) +
-		   Pad (0-p bytes) +
-		   Frame Check Sequence (4-bytes) */
-
-		RTMP_SET_PACKET_VLAN(pPacket, 1);
-		Sniff2BytesFromNdisBuffer(pSrcBuf, 2, &Byte0, &Byte1);
-		TypeLen = (USHORT)((Byte0 << 8) + Byte1);
-
-		pSrcBuf += 4; // Skip the VLAN Header.
-	}
-
-	switch (TypeLen)
-	{
-		case 0x0800:
-			{
-				ASSERT((pktLen > 34));
-				if (*(pSrcBuf + 9) == 0x11)
-				{	// udp packet
-					ASSERT((pktLen > 34));	// 14 for ethernet header, 20 for IP header
-
-					pSrcBuf += 20;	// Skip the IP header
-					srcPort = OS_NTOHS(*((UINT16 *)pSrcBuf));
-					dstPort = OS_NTOHS(*((UINT16 *)(pSrcBuf +2)));
-
-					if ((srcPort==0x44 && dstPort==0x43) || (srcPort==0x43 && dstPort==0x44))
-					{	//It's a BOOTP/DHCP packet
-						RTMP_SET_PACKET_DHCP(pPacket, 1);
-					}
-				}
-			}
-			break;
-		case 0x0806:
-			{
-				//ARP Packet.
-				RTMP_SET_PACKET_DHCP(pPacket, 1);
-			}
-			break;
-		case 0x888e:
-			{
-				// EAPOL Packet.
-				RTMP_SET_PACKET_EAPOL(pPacket, 1);
-			}
-			break;
-		default:
-			status = FALSE;
-			break;
-	}
-
-	return status;
-
-}
-
-
-
-VOID Update_Rssi_Sample(
-	IN PRTMP_ADAPTER	pAd,
-	IN RSSI_SAMPLE		*pRssi,
-	IN PRXWI_STRUC		pRxWI)
-		{
-	CHAR	rssi0 = pRxWI->RSSI0;
-	CHAR	rssi1 = pRxWI->RSSI1;
-	CHAR	rssi2 = pRxWI->RSSI2;
-
-	if (rssi0 != 0)
-	{
-		pRssi->LastRssi0	= ConvertToRssi(pAd, (CHAR)rssi0, RSSI_0);
-		pRssi->AvgRssi0X8	= (pRssi->AvgRssi0X8 - pRssi->AvgRssi0) + pRssi->LastRssi0;
-		pRssi->AvgRssi0	= pRssi->AvgRssi0X8 >> 3;
-	}
-
-	if (rssi1 != 0)
-	{
-		pRssi->LastRssi1	= ConvertToRssi(pAd, (CHAR)rssi1, RSSI_1);
-		pRssi->AvgRssi1X8	= (pRssi->AvgRssi1X8 - pRssi->AvgRssi1) + pRssi->LastRssi1;
-		pRssi->AvgRssi1	= pRssi->AvgRssi1X8 >> 3;
-	}
-
-	if (rssi2 != 0)
-	{
-		pRssi->LastRssi2	= ConvertToRssi(pAd, (CHAR)rssi2, RSSI_2);
-		pRssi->AvgRssi2X8  = (pRssi->AvgRssi2X8 - pRssi->AvgRssi2) + pRssi->LastRssi2;
-		pRssi->AvgRssi2 = pRssi->AvgRssi2X8 >> 3;
-	}
-}
-
-
-
-// Normal legacy Rx packet indication
-VOID Indicate_Legacy_Packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID)
-{
-	PNDIS_PACKET	pRxPacket = pRxBlk->pRxPacket;
-	UCHAR			Header802_3[LENGTH_802_3];
-
-	// 1. get 802.3 Header
-	// 2. remove LLC
-	// 		a. pointer pRxBlk->pData to payload
-	//      b. modify pRxBlk->DataSize
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
-#endif // CONFIG_STA_SUPPORT //
-
-	if (pRxBlk->DataSize > MAX_RX_PKT_LEN)
-	{
-		// release packet
-		RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
-		return;
-	}
-
-
-	STATS_INC_RX_PACKETS(pAd, FromWhichBSSID);
-
-#ifdef RT2870
-#ifdef DOT11_N_SUPPORT
-	if (pAd->CommonCfg.bDisableReordering == 0)
-	{
-		PBA_REC_ENTRY		pBAEntry;
-		ULONG				Now32;
-		UCHAR				Wcid = pRxBlk->pRxWI->WirelessCliID;
-		UCHAR				TID = pRxBlk->pRxWI->TID;
-		USHORT				Idx;
-
-#define REORDERING_PACKET_TIMEOUT		((100 * HZ)/1000)	// system ticks -- 100 ms
-
-		if (Wcid < MAX_LEN_OF_MAC_TABLE)
-		{
-			Idx = pAd->MacTab.Content[Wcid].BARecWcidArray[TID];
-			if (Idx != 0)
-			{
-				pBAEntry = &pAd->BATable.BARecEntry[Idx];
-				// update last rx time
-				NdisGetSystemUpTime(&Now32);
-				if ((pBAEntry->list.qlen > 0) &&
-					 RTMP_TIME_AFTER((unsigned long)Now32, (unsigned long)(pBAEntry->LastIndSeqAtTimer+(REORDERING_PACKET_TIMEOUT)))
-	   				)
-				{
-					printk("Indicate_Legacy_Packet():flush reordering_timeout_mpdus! RxWI->Flags=%d, pRxWI.TID=%d, RxD->AMPDU=%d!\n", pRxBlk->Flags, pRxBlk->pRxWI->TID, pRxBlk->RxD.AMPDU);
-					hex_dump("Dump the legacy Packet:", GET_OS_PKT_DATAPTR(pRxBlk->pRxPacket), 64);
-					ba_flush_reordering_timeout_mpdus(pAd, pBAEntry, Now32);
-				}
-			}
-		}
-	}
-#endif // DOT11_N_SUPPORT //
-#endif // RT2870 //
-
-	wlan_802_11_to_802_3_packet(pAd, pRxBlk, Header802_3, FromWhichBSSID);
-
-	//
-	// pass this 802.3 packet to upper layer or forward this packet to WM directly
-	//
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pRxPacket, FromWhichBSSID);
-#endif // CONFIG_STA_SUPPORT //
-
-}
-
-
-// Normal, AMPDU or AMSDU
-VOID CmmRxnonRalinkFrameIndicate(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID)
-{
-#ifdef DOT11_N_SUPPORT
-	if (RX_BLK_TEST_FLAG(pRxBlk, fRX_AMPDU) && (pAd->CommonCfg.bDisableReordering == 0))
-	{
-		Indicate_AMPDU_Packet(pAd, pRxBlk, FromWhichBSSID);
-	}
-	else
-#endif // DOT11_N_SUPPORT //
-	{
-#ifdef DOT11_N_SUPPORT
-		if (RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU))
-		{
-			// handle A-MSDU
-			Indicate_AMSDU_Packet(pAd, pRxBlk, FromWhichBSSID);
-		}
-		else
-#endif // DOT11_N_SUPPORT //
-		{
-			Indicate_Legacy_Packet(pAd, pRxBlk, FromWhichBSSID);
-		}
-	}
-}
-
-
-VOID CmmRxRalinkFrameIndicate(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MAC_TABLE_ENTRY	*pEntry,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID)
-{
-	UCHAR			Header802_3[LENGTH_802_3];
-	UINT16			Msdu2Size;
-	UINT16 			Payload1Size, Payload2Size;
-	PUCHAR 			pData2;
-	PNDIS_PACKET	pPacket2 = NULL;
-
-
-
-	Msdu2Size = *(pRxBlk->pData) + (*(pRxBlk->pData+1) << 8);
-
-	if ((Msdu2Size <= 1536) && (Msdu2Size < pRxBlk->DataSize))
-	{
-		/* skip two byte MSDU2 len */
-		pRxBlk->pData += 2;
-		pRxBlk->DataSize -= 2;
-	}
-	else
-	{
-		// release packet
-		RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
-		return;
-	}
-
-	// get 802.3 Header and  remove LLC
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
-#endif // CONFIG_STA_SUPPORT //
-
-
-	ASSERT(pRxBlk->pRxPacket);
-
-	// Ralink Aggregation frame
-	pAd->RalinkCounters.OneSecRxAggregationCount ++;
-	Payload1Size = pRxBlk->DataSize - Msdu2Size;
-	Payload2Size = Msdu2Size - LENGTH_802_3;
-
-	pData2 = pRxBlk->pData + Payload1Size + LENGTH_802_3;
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		pPacket2 = duplicate_pkt(pAd, (pData2-LENGTH_802_3), LENGTH_802_3, pData2, Payload2Size, FromWhichBSSID);
-#endif // CONFIG_STA_SUPPORT //
-
-	if (!pPacket2)
-	{
-		// release packet
-		RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
-		return;
-	}
-
-	// update payload size of 1st packet
-	pRxBlk->DataSize = Payload1Size;
-	wlan_802_11_to_802_3_packet(pAd, pRxBlk, Header802_3, FromWhichBSSID);
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pRxBlk->pRxPacket, FromWhichBSSID);
-#endif // CONFIG_STA_SUPPORT //
-
-	if (pPacket2)
-	{
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pPacket2, FromWhichBSSID);
-#endif // CONFIG_STA_SUPPORT //
-	}
-}
-
-
-#define RESET_FRAGFRAME(_fragFrame) \
-	{								\
-		_fragFrame.RxSize = 0;		\
-		_fragFrame.Sequence = 0;	\
-		_fragFrame.LastFrag = 0;	\
-		_fragFrame.Flags = 0;		\
-	}
-
-
-PNDIS_PACKET RTMPDeFragmentDataFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk)
-{
-	PHEADER_802_11	pHeader = pRxBlk->pHeader;
-	PNDIS_PACKET	pRxPacket = pRxBlk->pRxPacket;
-	UCHAR			*pData = pRxBlk->pData;
-	USHORT			DataSize = pRxBlk->DataSize;
-	PNDIS_PACKET	pRetPacket = NULL;
-	UCHAR			*pFragBuffer = NULL;
-	BOOLEAN 		bReassDone = FALSE;
-	UCHAR			HeaderRoom = 0;
-
-
-	ASSERT(pHeader);
-
-	HeaderRoom = pData - (UCHAR *)pHeader;
-
-	// Re-assemble the fragmented packets
-	if (pHeader->Frag == 0)		// Frag. Number is 0 : First frag or only one pkt
-	{
-		// the first pkt of fragment, record it.
-		if (pHeader->FC.MoreFrag)
-		{
-			ASSERT(pAd->FragFrame.pFragPacket);
-			pFragBuffer = GET_OS_PKT_DATAPTR(pAd->FragFrame.pFragPacket);
-			pAd->FragFrame.RxSize   = DataSize + HeaderRoom;
-			NdisMoveMemory(pFragBuffer,	 pHeader, pAd->FragFrame.RxSize);
-			pAd->FragFrame.Sequence = pHeader->Sequence;
-			pAd->FragFrame.LastFrag = pHeader->Frag;	   // Should be 0
-			ASSERT(pAd->FragFrame.LastFrag == 0);
-			goto done;	// end of processing this frame
-		}
-	}
-	else	//Middle & End of fragment
-	{
-		if ((pHeader->Sequence != pAd->FragFrame.Sequence) ||
-			(pHeader->Frag != (pAd->FragFrame.LastFrag + 1)))
-		{
-			// Fragment is not the same sequence or out of fragment number order
-			// Reset Fragment control blk
-			RESET_FRAGFRAME(pAd->FragFrame);
-			DBGPRINT(RT_DEBUG_ERROR, ("Fragment is not the same sequence or out of fragment number order.\n"));
-			goto done; // give up this frame
-		}
-		else if ((pAd->FragFrame.RxSize + DataSize) > MAX_FRAME_SIZE)
-		{
-			// Fragment frame is too large, it exeeds the maximum frame size.
-			// Reset Fragment control blk
-			RESET_FRAGFRAME(pAd->FragFrame);
-			DBGPRINT(RT_DEBUG_ERROR, ("Fragment frame is too large, it exeeds the maximum frame size.\n"));
-			goto done; // give up this frame
-		}
-
-        //
-		// Broadcom AP(BCM94704AGR) will send out LLC in fragment's packet, LLC only can accpet at first fragment.
-		// In this case, we will dropt it.
-		//
-		if (NdisEqualMemory(pData, SNAP_802_1H, sizeof(SNAP_802_1H)))
-		{
-			DBGPRINT(RT_DEBUG_ERROR, ("Find another LLC at Middle or End fragment(SN=%d, Frag=%d)\n", pHeader->Sequence, pHeader->Frag));
-			goto done; // give up this frame
-		}
-
-		pFragBuffer = GET_OS_PKT_DATAPTR(pAd->FragFrame.pFragPacket);
-
-		// concatenate this fragment into the re-assembly buffer
-		NdisMoveMemory((pFragBuffer + pAd->FragFrame.RxSize), pData, DataSize);
-		pAd->FragFrame.RxSize  += DataSize;
-		pAd->FragFrame.LastFrag = pHeader->Frag;	   // Update fragment number
-
-		// Last fragment
-		if (pHeader->FC.MoreFrag == FALSE)
-		{
-			bReassDone = TRUE;
-		}
-	}
-
-done:
-	// always release rx fragmented packet
-	RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
-
-	// return defragmented packet if packet is reassembled completely
-	// otherwise return NULL
-	if (bReassDone)
-	{
-		PNDIS_PACKET pNewFragPacket;
-
-		// allocate a new packet buffer for fragment
-		pNewFragPacket = RTMP_AllocateFragPacketBuffer(pAd, RX_BUFFER_NORMSIZE);
-		if (pNewFragPacket)
-		{
-			// update RxBlk
-			pRetPacket = pAd->FragFrame.pFragPacket;
-			pAd->FragFrame.pFragPacket = pNewFragPacket;
-			pRxBlk->pHeader = (PHEADER_802_11) GET_OS_PKT_DATAPTR(pRetPacket);
-			pRxBlk->pData = (UCHAR *)pRxBlk->pHeader + HeaderRoom;
-			pRxBlk->DataSize = pAd->FragFrame.RxSize - HeaderRoom;
-			pRxBlk->pRxPacket = pRetPacket;
-		}
-		else
-		{
-			RESET_FRAGFRAME(pAd->FragFrame);
-		}
-	}
-
-	return pRetPacket;
-}
-
-
-VOID Indicate_AMSDU_Packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID)
-{
-	UINT			nMSDU;
-
-	update_os_packet_info(pAd, pRxBlk, FromWhichBSSID);
-	RTMP_SET_PACKET_IF(pRxBlk->pRxPacket, FromWhichBSSID);
-	nMSDU = deaggregate_AMSDU_announce(pAd, pRxBlk->pRxPacket, pRxBlk->pData, pRxBlk->DataSize);
-}
-
-VOID Indicate_EAPOL_Packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID)
-{
-	MAC_TABLE_ENTRY *pEntry = NULL;
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		pEntry = &pAd->MacTab.Content[BSSID_WCID];
-		STARxEAPOLFrameIndicate(pAd, pEntry, pRxBlk, FromWhichBSSID);
-		return;
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	if (pEntry == NULL)
-	{
-		DBGPRINT(RT_DEBUG_WARN, ("Indicate_EAPOL_Packet: drop and release the invalid packet.\n"));
-		// release packet
-		RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
-		return;
-	}
-}
-
-#define BCN_TBTT_OFFSET		64	//defer 64 us
-VOID ReSyncBeaconTime(
-	IN  PRTMP_ADAPTER   pAd)
-{
-
-	UINT32  Offset;
-
-
-	Offset = (pAd->TbttTickCount) % (BCN_TBTT_OFFSET);
-
-	pAd->TbttTickCount++;
-
-	//
-	// The updated BeaconInterval Value will affect Beacon Interval after two TBTT
-	// beacasue the original BeaconInterval had been loaded into next TBTT_TIMER
-	//
-	if (Offset == (BCN_TBTT_OFFSET-2))
-	{
-		BCN_TIME_CFG_STRUC csr;
-		RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr.word);
-		csr.field.BeaconInterval = (pAd->CommonCfg.BeaconPeriod << 4) - 1 ;	// ASIC register in units of 1/16 TU = 64us
-		RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr.word);
-	}
-	else
-	{
-		if (Offset == (BCN_TBTT_OFFSET-1))
-		{
-			BCN_TIME_CFG_STRUC csr;
-
-			RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr.word);
-			csr.field.BeaconInterval = (pAd->CommonCfg.BeaconPeriod) << 4; // ASIC register in units of 1/16 TU
-			RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr.word);
-		}
-	}
-}
-
+#include "../../rt2870/common/cmm_data.c"
diff --git a/drivers/staging/rt3070/common/cmm_data_2870.c b/drivers/staging/rt3070/common/cmm_data_2870.c
index b1066aa2bb2..0e51ee414a2 100644
--- a/drivers/staging/rt3070/common/cmm_data_2870.c
+++ b/drivers/staging/rt3070/common/cmm_data_2870.c
@@ -1,980 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-*/
-/*
-   All functions in this file must be USB-depended, or you should out your function
-	in other files.
-
-*/
-#include	"../rt_config.h"
-
-
-/*
-	We can do copy the frame into pTxContext when match following conditions.
-		=>
-		=>
-		=>
-*/
-static inline NDIS_STATUS RtmpUSBCanDoWrite(
-	IN RTMP_ADAPTER		*pAd,
-	IN UCHAR			QueIdx,
-	IN HT_TX_CONTEXT 	*pHTTXContext)
-{
-	NDIS_STATUS	canWrite = NDIS_STATUS_RESOURCES;
-
-	if (((pHTTXContext->CurWritePosition) < pHTTXContext->NextBulkOutPosition) && (pHTTXContext->CurWritePosition + LOCAL_TXBUF_SIZE) > pHTTXContext->NextBulkOutPosition)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("RtmpUSBCanDoWrite c1!\n"));
-		RTUSB_SET_BULK_FLAG(pAd, (fRTUSB_BULK_OUT_DATA_NORMAL << QueIdx));
-	}
-	else if ((pHTTXContext->CurWritePosition == 8) && (pHTTXContext->NextBulkOutPosition < LOCAL_TXBUF_SIZE))
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("RtmpUSBCanDoWrite c2!\n"));
-		RTUSB_SET_BULK_FLAG(pAd, (fRTUSB_BULK_OUT_DATA_NORMAL << QueIdx));
-	}
-	else if (pHTTXContext->bCurWriting == TRUE)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("RtmpUSBCanDoWrite c3!\n"));
-	}
-	else
-	{
-		canWrite = NDIS_STATUS_SUCCESS;
-	}
-
-
-	return canWrite;
-}
-
-
-USHORT RtmpUSB_WriteSubTxResource(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk,
-	IN	BOOLEAN			bIsLast,
-	OUT	USHORT			*FreeNumber)
-{
-
-	// Dummy function. Should be removed in the future.
-	return 0;
-
-}
-
-USHORT	RtmpUSB_WriteFragTxResource(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk,
-	IN	UCHAR			fragNum,
-	OUT	USHORT			*FreeNumber)
-{
-	HT_TX_CONTEXT	*pHTTXContext;
-	USHORT			hwHdrLen;	// The hwHdrLen consist of 802.11 header length plus the header padding length.
-	UINT32			fillOffset;
-	TXINFO_STRUC	*pTxInfo;
-	TXWI_STRUC		*pTxWI;
-	PUCHAR			pWirelessPacket = NULL;
-	UCHAR			QueIdx;
-	NDIS_STATUS		Status;
-	unsigned long	IrqFlags;
-	UINT32			USBDMApktLen = 0, DMAHdrLen, padding;
-	BOOLEAN			TxQLastRound = FALSE;
-
-	//
-	// get Tx Ring Resource & Dma Buffer address
-	//
-	QueIdx = pTxBlk->QueIdx;
-	pHTTXContext  = &pAd->TxContext[QueIdx];
-
-	RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
-
-	pHTTXContext  = &pAd->TxContext[QueIdx];
-	fillOffset = pHTTXContext->CurWritePosition;
-
-	if(fragNum == 0)
-	{
-		// Check if we have enough space for this bulk-out batch.
-		Status = RtmpUSBCanDoWrite(pAd, QueIdx, pHTTXContext);
-		if (Status == NDIS_STATUS_SUCCESS)
-		{
-			pHTTXContext->bCurWriting = TRUE;
-
-			// Reserve space for 8 bytes padding.
-			if ((pHTTXContext->ENextBulkOutPosition == pHTTXContext->CurWritePosition))
-			{
-				pHTTXContext->ENextBulkOutPosition += 8;
-				pHTTXContext->CurWritePosition += 8;
-				fillOffset += 8;
-			}
-			pTxBlk->Priv = 0;
-			pHTTXContext->CurWriteRealPos = pHTTXContext->CurWritePosition;
-		}
-		else
-		{
-			RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
-
-			RELEASE_NDIS_PACKET(pAd, pTxBlk->pPacket, NDIS_STATUS_FAILURE);
-			return(Status);
-		}
-	}
-	else
-	{
-		// For sub-sequent frames of this bulk-out batch. Just copy it to our bulk-out buffer.
-		Status = ((pHTTXContext->bCurWriting == TRUE) ? NDIS_STATUS_SUCCESS : NDIS_STATUS_FAILURE);
-		if (Status == NDIS_STATUS_SUCCESS)
-		{
-			fillOffset += pTxBlk->Priv;
-		}
-		else
-		{
-			RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
-
-			RELEASE_NDIS_PACKET(pAd, pTxBlk->pPacket, NDIS_STATUS_FAILURE);
-			return(Status);
-		}
-	}
-
-	NdisZeroMemory((PUCHAR)(&pTxBlk->HeaderBuf[0]), TXINFO_SIZE);
-	pTxInfo = (PTXINFO_STRUC)(&pTxBlk->HeaderBuf[0]);
-	pTxWI= (PTXWI_STRUC)(&pTxBlk->HeaderBuf[TXINFO_SIZE]);
-
-	pWirelessPacket = &pHTTXContext->TransferBuffer->field.WirelessPacket[fillOffset];
-
-	// copy TXWI + WLAN Header + LLC into DMA Header Buffer
-	//hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4);
-	hwHdrLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
-
-	// Build our URB for USBD
-	DMAHdrLen = TXWI_SIZE + hwHdrLen;
-	USBDMApktLen = DMAHdrLen + pTxBlk->SrcBufLen;
-	padding = (4 - (USBDMApktLen % 4)) & 0x03;	// round up to 4 byte alignment
-	USBDMApktLen += padding;
-
-	pTxBlk->Priv += (TXINFO_SIZE + USBDMApktLen);
-
-	// For TxInfo, the length of USBDMApktLen = TXWI_SIZE + 802.11 header + payload
-	RTMPWriteTxInfo(pAd, pTxInfo, (USHORT)(USBDMApktLen), FALSE, FIFO_EDCA, FALSE /*NextValid*/,  FALSE);
-
-	if (fragNum == pTxBlk->TotalFragNum)
-	{
-		pTxInfo->USBDMATxburst = 0;
-		if ((pHTTXContext->CurWritePosition + pTxBlk->Priv + 3906)> MAX_TXBULK_LIMIT)
-		{
-			pTxInfo->SwUseLastRound = 1;
-			TxQLastRound = TRUE;
-		}
-	}
-	else
-	{
-		pTxInfo->USBDMATxburst = 1;
-	}
-
-	NdisMoveMemory(pWirelessPacket, pTxBlk->HeaderBuf, TXINFO_SIZE + TXWI_SIZE + hwHdrLen);
-#ifdef RT_BIG_ENDIAN
-	RTMPFrameEndianChange(pAd, (PUCHAR)(pWirelessPacket + TXINFO_SIZE + TXWI_SIZE), DIR_WRITE, FALSE);
-#endif // RT_BIG_ENDIAN //
-	pWirelessPacket += (TXINFO_SIZE + TXWI_SIZE + hwHdrLen);
-	pHTTXContext->CurWriteRealPos += (TXINFO_SIZE + TXWI_SIZE + hwHdrLen);
-
-	RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
-
-	NdisMoveMemory(pWirelessPacket, pTxBlk->pSrcBufData, pTxBlk->SrcBufLen);
-
-	//	Zero the last padding.
-	pWirelessPacket += pTxBlk->SrcBufLen;
-	NdisZeroMemory(pWirelessPacket, padding + 8);
-
-	if (fragNum == pTxBlk->TotalFragNum)
-	{
-		RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
-
-		// Update the pHTTXContext->CurWritePosition. 3906 used to prevent the NextBulkOut is a A-RALINK/A-MSDU Frame.
-		pHTTXContext->CurWritePosition += pTxBlk->Priv;
-		if (TxQLastRound == TRUE)
-			pHTTXContext->CurWritePosition = 8;
-		pHTTXContext->CurWriteRealPos = pHTTXContext->CurWritePosition;
-
-
-		// Finally, set bCurWriting as FALSE
-	pHTTXContext->bCurWriting = FALSE;
-
-		RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
-
-		// succeed and release the skb buffer
-		RELEASE_NDIS_PACKET(pAd, pTxBlk->pPacket, NDIS_STATUS_SUCCESS);
-	}
-
-
-	return(Status);
-
-}
-
-
-USHORT RtmpUSB_WriteSingleTxResource(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk,
-	IN	BOOLEAN			bIsLast,
-	OUT	USHORT			*FreeNumber)
-{
-	HT_TX_CONTEXT	*pHTTXContext;
-	USHORT			hwHdrLen;
-	UINT32			fillOffset;
-	TXINFO_STRUC	*pTxInfo;
-	TXWI_STRUC		*pTxWI;
-	PUCHAR			pWirelessPacket;
-	UCHAR			QueIdx;
-	unsigned long	IrqFlags;
-	NDIS_STATUS		Status;
-	UINT32			USBDMApktLen = 0, DMAHdrLen, padding;
-	BOOLEAN			bTxQLastRound = FALSE;
-
-	// For USB, didn't need PCI_MAP_SINGLE()
-	//SrcBufPA = PCI_MAP_SINGLE(pAd, (char *) pTxBlk->pSrcBufData, pTxBlk->SrcBufLen, PCI_DMA_TODEVICE);
-
-
-	//
-	// get Tx Ring Resource & Dma Buffer address
-	//
-	QueIdx = pTxBlk->QueIdx;
-
-	RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
-	pHTTXContext  = &pAd->TxContext[QueIdx];
-	fillOffset = pHTTXContext->CurWritePosition;
-
-
-
-	// Check ring full.
-	Status = RtmpUSBCanDoWrite(pAd, QueIdx, pHTTXContext);
-	if(Status == NDIS_STATUS_SUCCESS)
-	{
-		pHTTXContext->bCurWriting = TRUE;
-
-		pTxInfo = (PTXINFO_STRUC)(&pTxBlk->HeaderBuf[0]);
-		pTxWI= (PTXWI_STRUC)(&pTxBlk->HeaderBuf[TXINFO_SIZE]);
-
-		// Reserve space for 8 bytes padding.
-		if ((pHTTXContext->ENextBulkOutPosition == pHTTXContext->CurWritePosition))
-		{
-			pHTTXContext->ENextBulkOutPosition += 8;
-			pHTTXContext->CurWritePosition += 8;
-			fillOffset += 8;
-		}
-		pHTTXContext->CurWriteRealPos = pHTTXContext->CurWritePosition;
-
-		pWirelessPacket = &pHTTXContext->TransferBuffer->field.WirelessPacket[fillOffset];
-
-		// copy TXWI + WLAN Header + LLC into DMA Header Buffer
-		//hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4);
-		hwHdrLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
-
-		// Build our URB for USBD
-		DMAHdrLen = TXWI_SIZE + hwHdrLen;
-		USBDMApktLen = DMAHdrLen + pTxBlk->SrcBufLen;
-		padding = (4 - (USBDMApktLen % 4)) & 0x03;	// round up to 4 byte alignment
-		USBDMApktLen += padding;
-
-		pTxBlk->Priv = (TXINFO_SIZE + USBDMApktLen);
-
-		// For TxInfo, the length of USBDMApktLen = TXWI_SIZE + 802.11 header + payload
-		//PS packets use HCCA queue when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA)
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		RTMPWriteTxInfo(pAd, pTxInfo, (USHORT)(USBDMApktLen), FALSE, FIFO_EDCA, FALSE /*NextValid*/,  FALSE);
-#endif // CONFIG_STA_SUPPORT //
-
-		if ((pHTTXContext->CurWritePosition + 3906 + pTxBlk->Priv) > MAX_TXBULK_LIMIT)
-		{
-			pTxInfo->SwUseLastRound = 1;
-			bTxQLastRound = TRUE;
-		}
-		NdisMoveMemory(pWirelessPacket, pTxBlk->HeaderBuf, TXINFO_SIZE + TXWI_SIZE + hwHdrLen);
-#ifdef RT_BIG_ENDIAN
-		RTMPFrameEndianChange(pAd, (PUCHAR)(pWirelessPacket + TXINFO_SIZE + TXWI_SIZE), DIR_WRITE, FALSE);
-#endif // RT_BIG_ENDIAN //
-		pWirelessPacket += (TXINFO_SIZE + TXWI_SIZE + hwHdrLen);
-
-		// We unlock it here to prevent the first 8 bytes maybe over-writed issue.
-		//	1. First we got CurWritePosition but the first 8 bytes still not write to the pTxcontext.
-		//	2. An interrupt break our routine and handle bulk-out complete.
-		//	3. In the bulk-out compllete, it need to do another bulk-out,
-		//			if the ENextBulkOutPosition is just the same as CurWritePosition, it will save the first 8 bytes from CurWritePosition,
-		//			but the payload still not copyed. the pTxContext->SavedPad[] will save as allzero. and set the bCopyPad = TRUE.
-		//	4. Interrupt complete.
-		//  5. Our interrupted routine go back and fill the first 8 bytes to pTxContext.
-		//	6. Next time when do bulk-out, it found the bCopyPad==TRUE and will copy the SavedPad[] to pTxContext->NextBulkOutPosition.
-		//		and the packet will wrong.
-		pHTTXContext->CurWriteRealPos += (TXINFO_SIZE + TXWI_SIZE + hwHdrLen);
-		RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
-
-		NdisMoveMemory(pWirelessPacket, pTxBlk->pSrcBufData, pTxBlk->SrcBufLen);
-		pWirelessPacket += pTxBlk->SrcBufLen;
-		NdisZeroMemory(pWirelessPacket, padding + 8);
-
-		RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
-
-		pHTTXContext->CurWritePosition += pTxBlk->Priv;
-		if (bTxQLastRound)
-			pHTTXContext->CurWritePosition = 8;
-		pHTTXContext->CurWriteRealPos = pHTTXContext->CurWritePosition;
-
-	pHTTXContext->bCurWriting = FALSE;
-	}
-
-
-	RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
-
-
-	// succeed and release the skb buffer
-	RELEASE_NDIS_PACKET(pAd, pTxBlk->pPacket, NDIS_STATUS_SUCCESS);
-
-	return(Status);
-
-}
-
-
-USHORT RtmpUSB_WriteMultiTxResource(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk,
-	IN	UCHAR			frameNum,
-	OUT	USHORT			*FreeNumber)
-{
-	HT_TX_CONTEXT	*pHTTXContext;
-	USHORT			hwHdrLen;	// The hwHdrLen consist of 802.11 header length plus the header padding length.
-	UINT32			fillOffset;
-	TXINFO_STRUC	*pTxInfo;
-	TXWI_STRUC		*pTxWI;
-	PUCHAR			pWirelessPacket = NULL;
-	UCHAR			QueIdx;
-	NDIS_STATUS		Status;
-	unsigned long	IrqFlags;
-	//UINT32			USBDMApktLen = 0, DMAHdrLen, padding;
-
-	//
-	// get Tx Ring Resource & Dma Buffer address
-	//
-	QueIdx = pTxBlk->QueIdx;
-	pHTTXContext  = &pAd->TxContext[QueIdx];
-
-	RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
-
-	if(frameNum == 0)
-	{
-		// Check if we have enough space for this bulk-out batch.
-		Status = RtmpUSBCanDoWrite(pAd, QueIdx, pHTTXContext);
-		if (Status == NDIS_STATUS_SUCCESS)
-		{
-			pHTTXContext->bCurWriting = TRUE;
-
-			pTxInfo = (PTXINFO_STRUC)(&pTxBlk->HeaderBuf[0]);
-			pTxWI= (PTXWI_STRUC)(&pTxBlk->HeaderBuf[TXINFO_SIZE]);
-
-
-			// Reserve space for 8 bytes padding.
-			if ((pHTTXContext->ENextBulkOutPosition == pHTTXContext->CurWritePosition))
-			{
-
-				pHTTXContext->CurWritePosition += 8;
-				pHTTXContext->ENextBulkOutPosition += 8;
-			}
-			fillOffset = pHTTXContext->CurWritePosition;
-			pHTTXContext->CurWriteRealPos = pHTTXContext->CurWritePosition;
-
-			pWirelessPacket = &pHTTXContext->TransferBuffer->field.WirelessPacket[fillOffset];
-
-			//
-			// Copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer
-			//
-			if (pTxBlk->TxFrameType == TX_AMSDU_FRAME)
-				//hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_AMSDU_SUBFRAMEHEAD, 4)+LENGTH_AMSDU_SUBFRAMEHEAD;
-				hwHdrLen = pTxBlk->MpduHeaderLen-LENGTH_AMSDU_SUBFRAMEHEAD + pTxBlk->HdrPadLen + LENGTH_AMSDU_SUBFRAMEHEAD;
-			else if (pTxBlk->TxFrameType == TX_RALINK_FRAME)
-				//hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_ARALINK_HEADER_FIELD, 4)+LENGTH_ARALINK_HEADER_FIELD;
-				hwHdrLen = pTxBlk->MpduHeaderLen-LENGTH_ARALINK_HEADER_FIELD + pTxBlk->HdrPadLen + LENGTH_ARALINK_HEADER_FIELD;
-			else
-				//hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4);
-				hwHdrLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
-
-			// Update the pTxBlk->Priv.
-			pTxBlk->Priv = TXINFO_SIZE + TXWI_SIZE + hwHdrLen;
-
-			//	pTxInfo->USBDMApktLen now just a temp value and will to correct latter.
-			RTMPWriteTxInfo(pAd, pTxInfo, (USHORT)(pTxBlk->Priv), FALSE, FIFO_EDCA, FALSE /*NextValid*/,  FALSE);
-
-			// Copy it.
-			NdisMoveMemory(pWirelessPacket, pTxBlk->HeaderBuf, pTxBlk->Priv);
-#ifdef RT_BIG_ENDIAN
-			RTMPFrameEndianChange(pAd, (PUCHAR)(pWirelessPacket+ TXINFO_SIZE + TXWI_SIZE), DIR_WRITE, FALSE);
-#endif // RT_BIG_ENDIAN //
-			pHTTXContext->CurWriteRealPos += pTxBlk->Priv;
-			pWirelessPacket += pTxBlk->Priv;
-		}
-	}
-	else
-	{	// For sub-sequent frames of this bulk-out batch. Just copy it to our bulk-out buffer.
-
-		Status = ((pHTTXContext->bCurWriting == TRUE) ? NDIS_STATUS_SUCCESS : NDIS_STATUS_FAILURE);
-		if (Status == NDIS_STATUS_SUCCESS)
-		{
-			fillOffset =  (pHTTXContext->CurWritePosition + pTxBlk->Priv);
-			pWirelessPacket = &pHTTXContext->TransferBuffer->field.WirelessPacket[fillOffset];
-
-			//hwHdrLen = pTxBlk->MpduHeaderLen;
-			NdisMoveMemory(pWirelessPacket, pTxBlk->HeaderBuf, pTxBlk->MpduHeaderLen);
-			pWirelessPacket += (pTxBlk->MpduHeaderLen);
-			pTxBlk->Priv += pTxBlk->MpduHeaderLen;
-		}
-		else
-		{	// It should not happened now unless we are going to shutdown.
-			DBGPRINT(RT_DEBUG_ERROR, ("WriteMultiTxResource():bCurWriting is FALSE when handle sub-sequent frames.\n"));
-			Status = NDIS_STATUS_FAILURE;
-		}
-	}
-
-
-	// We unlock it here to prevent the first 8 bytes maybe over-write issue.
-	//	1. First we got CurWritePosition but the first 8 bytes still not write to the pTxContext.
-	//	2. An interrupt break our routine and handle bulk-out complete.
-	//	3. In the bulk-out compllete, it need to do another bulk-out,
-	//			if the ENextBulkOutPosition is just the same as CurWritePosition, it will save the first 8 bytes from CurWritePosition,
-	//			but the payload still not copyed. the pTxContext->SavedPad[] will save as allzero. and set the bCopyPad = TRUE.
-	//	4. Interrupt complete.
-	//  5. Our interrupted routine go back and fill the first 8 bytes to pTxContext.
-	//	6. Next time when do bulk-out, it found the bCopyPad==TRUE and will copy the SavedPad[] to pTxContext->NextBulkOutPosition.
-	//		and the packet will wrong.
-	RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
-
-	if (Status != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("WriteMultiTxResource: CWPos = %ld, NBOutPos = %ld.\n", pHTTXContext->CurWritePosition, pHTTXContext->NextBulkOutPosition));
-		goto done;
-	}
-
-	// Copy the frame content into DMA buffer and update the pTxBlk->Priv
-	NdisMoveMemory(pWirelessPacket, pTxBlk->pSrcBufData, pTxBlk->SrcBufLen);
-	pWirelessPacket += pTxBlk->SrcBufLen;
-	pTxBlk->Priv += pTxBlk->SrcBufLen;
-
-done:
-	// Release the skb buffer here
-	RELEASE_NDIS_PACKET(pAd, pTxBlk->pPacket, NDIS_STATUS_SUCCESS);
-
-	return(Status);
-
-}
-
-
-VOID RtmpUSB_FinalWriteTxResource(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk,
-	IN	USHORT			totalMPDUSize,
-	IN	USHORT			TxIdx)
-{
-	UCHAR			QueIdx;
-	HT_TX_CONTEXT	*pHTTXContext;
-	UINT32			fillOffset;
-	TXINFO_STRUC	*pTxInfo;
-	TXWI_STRUC		*pTxWI;
-	UINT32			USBDMApktLen, padding;
-	unsigned long	IrqFlags;
-	PUCHAR			pWirelessPacket;
-
-	QueIdx = pTxBlk->QueIdx;
-	pHTTXContext  = &pAd->TxContext[QueIdx];
-
-	RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
-
-	if (pHTTXContext->bCurWriting == TRUE)
-	{
-		fillOffset = pHTTXContext->CurWritePosition;
-		if (((pHTTXContext->ENextBulkOutPosition == pHTTXContext->CurWritePosition) || ((pHTTXContext->ENextBulkOutPosition-8) == pHTTXContext->CurWritePosition))
-			&& (pHTTXContext->bCopySavePad == TRUE))
-			pWirelessPacket = (PUCHAR)(&pHTTXContext->SavedPad[0]);
-		else
-			pWirelessPacket = (PUCHAR)(&pHTTXContext->TransferBuffer->field.WirelessPacket[fillOffset]);
-
-		//
-		// Update TxInfo->USBDMApktLen ,
-		//		the length = TXWI_SIZE + 802.11_hdr + 802.11_hdr_pad + payload_of_all_batch_frames + Bulk-Out-padding
-		//
-		pTxInfo = (PTXINFO_STRUC)(pWirelessPacket);
-
-		// Calculate the bulk-out padding
-		USBDMApktLen = pTxBlk->Priv - TXINFO_SIZE;
-		padding = (4 - (USBDMApktLen % 4)) & 0x03;	// round up to 4 byte alignment
-		USBDMApktLen += padding;
-
-		pTxInfo->USBDMATxPktLen = USBDMApktLen;
-
-		//
-		// Update TXWI->MPDUtotalByteCount ,
-		//		the length = 802.11 header + payload_of_all_batch_frames
-		pTxWI= (PTXWI_STRUC)(pWirelessPacket + TXINFO_SIZE);
-		pTxWI->MPDUtotalByteCount = totalMPDUSize;
-
-		//
-		// Update the pHTTXContext->CurWritePosition
-		//
-		pHTTXContext->CurWritePosition += (TXINFO_SIZE + USBDMApktLen);
-		if ((pHTTXContext->CurWritePosition + 3906)> MAX_TXBULK_LIMIT)
-		{	// Add 3906 for prevent the NextBulkOut packet size is a A-RALINK/A-MSDU Frame.
-			pHTTXContext->CurWritePosition = 8;
-			pTxInfo->SwUseLastRound = 1;
-		}
-		pHTTXContext->CurWriteRealPos = pHTTXContext->CurWritePosition;
-
-
-		//
-		//	Zero the last padding.
-		//
-		pWirelessPacket = (&pHTTXContext->TransferBuffer->field.WirelessPacket[fillOffset + pTxBlk->Priv]);
-		NdisZeroMemory(pWirelessPacket, padding + 8);
-
-		// Finally, set bCurWriting as FALSE
-		pHTTXContext->bCurWriting = FALSE;
-
-	}
-	else
-	{	// It should not happened now unless we are going to shutdown.
-		DBGPRINT(RT_DEBUG_ERROR, ("FinalWriteTxResource():bCurWriting is FALSE when handle last frames.\n"));
-	}
-
-	RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
-
-}
-
-
-VOID RtmpUSBDataLastTxIdx(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			QueIdx,
-	IN	USHORT			TxIdx)
-{
-	// DO nothing for USB.
-}
-
-
-/*
-	When can do bulk-out:
-		1. TxSwFreeIdx < TX_RING_SIZE;
-			It means has at least one Ring entity is ready for bulk-out, kick it out.
-		2. If TxSwFreeIdx == TX_RING_SIZE
-			Check if the CurWriting flag is FALSE, if it's FALSE, we can do kick out.
-
-*/
-VOID RtmpUSBDataKickOut(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk,
-	IN	UCHAR			QueIdx)
-{
-	RTUSB_SET_BULK_FLAG(pAd, (fRTUSB_BULK_OUT_DATA_NORMAL << QueIdx));
-	RTUSBKickBulkOut(pAd);
-
-}
-
-
-/*
-	Must be run in Interrupt context
-	This function handle RT2870 specific TxDesc and cpu index update and kick the packet out.
- */
-int RtmpUSBMgmtKickOut(
-	IN RTMP_ADAPTER 	*pAd,
-	IN UCHAR 			QueIdx,
-	IN PNDIS_PACKET		pPacket,
-	IN PUCHAR			pSrcBufVA,
-	IN UINT 			SrcBufLen)
-{
-	PTXINFO_STRUC	pTxInfo;
-	ULONG			BulkOutSize;
-	UCHAR			padLen;
-	PUCHAR			pDest;
-	ULONG			SwIdx = pAd->MgmtRing.TxCpuIdx;
-	PTX_CONTEXT		pMLMEContext = (PTX_CONTEXT)pAd->MgmtRing.Cell[SwIdx].AllocVa;
-	unsigned long	IrqFlags;
-
-
-	pTxInfo = (PTXINFO_STRUC)(pSrcBufVA);
-
-	// Build our URB for USBD
-	BulkOutSize = SrcBufLen;
-	BulkOutSize = (BulkOutSize + 3) & (~3);
-	RTMPWriteTxInfo(pAd, pTxInfo, (USHORT)(BulkOutSize - TXINFO_SIZE), TRUE, EpToQueue[MGMTPIPEIDX], FALSE,  FALSE);
-
-	BulkOutSize += 4; // Always add 4 extra bytes at every packet.
-
-	// If BulkOutSize is multiple of BulkOutMaxPacketSize, add extra 4 bytes again.
-	if ((BulkOutSize % pAd->BulkOutMaxPacketSize) == 0)
-		BulkOutSize += 4;
-
-	padLen = BulkOutSize - SrcBufLen;
-	ASSERT((padLen <= RTMP_PKT_TAIL_PADDING));
-
-	// Now memzero all extra padding bytes.
-	pDest = (PUCHAR)(pSrcBufVA + SrcBufLen);
-	skb_put(GET_OS_PKT_TYPE(pPacket), padLen);
-	NdisZeroMemory(pDest, padLen);
-
-	RTMP_IRQ_LOCK(&pAd->MLMEBulkOutLock, IrqFlags);
-
-	pAd->MgmtRing.Cell[pAd->MgmtRing.TxCpuIdx].pNdisPacket = pPacket;
-	pMLMEContext->TransferBuffer = (PTX_BUFFER)(GET_OS_PKT_DATAPTR(pPacket));
-
-	// Length in TxInfo should be 8 less than bulkout size.
-	pMLMEContext->BulkOutSize = BulkOutSize;
-	pMLMEContext->InUse = TRUE;
-	pMLMEContext->bWaitingBulkOut = TRUE;
-
-
-	//for debug
-	//hex_dump("RtmpUSBMgmtKickOut", &pMLMEContext->TransferBuffer->field.WirelessPacket[0], (pMLMEContext->BulkOutSize > 16 ? 16 : pMLMEContext->BulkOutSize));
-
-	//pAd->RalinkCounters.KickTxCount++;
-	//pAd->RalinkCounters.OneSecTxDoneCount++;
-
-	//if (pAd->MgmtRing.TxSwFreeIdx == MGMT_RING_SIZE)
-	//	needKickOut = TRUE;
-
-	// Decrease the TxSwFreeIdx and Increase the TX_CTX_IDX
-	pAd->MgmtRing.TxSwFreeIdx--;
-	INC_RING_INDEX(pAd->MgmtRing.TxCpuIdx, MGMT_RING_SIZE);
-
-	RTMP_IRQ_UNLOCK(&pAd->MLMEBulkOutLock, IrqFlags);
-
-	RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_MLME);
-	//if (needKickOut)
-	RTUSBKickBulkOut(pAd);
-
-	return 0;
-}
-
-
-VOID RtmpUSBNullFrameKickOut(
-	IN RTMP_ADAPTER *pAd,
-	IN UCHAR		QueIdx,
-	IN UCHAR		*pNullFrame,
-	IN UINT32		frameLen)
-{
-	if (pAd->NullContext.InUse == FALSE)
-	{
-		PTX_CONTEXT		pNullContext;
-		PTXINFO_STRUC	pTxInfo;
-		PTXWI_STRUC		pTxWI;
-		PUCHAR			pWirelessPkt;
-
-		pNullContext = &(pAd->NullContext);
-
-		// Set the in use bit
-		pNullContext->InUse = TRUE;
-		pWirelessPkt = (PUCHAR)&pNullContext->TransferBuffer->field.WirelessPacket[0];
-
-		RTMPZeroMemory(&pWirelessPkt[0], 100);
-		pTxInfo = (PTXINFO_STRUC)&pWirelessPkt[0];
-		RTMPWriteTxInfo(pAd, pTxInfo, (USHORT)(sizeof(HEADER_802_11)+TXWI_SIZE), TRUE, EpToQueue[MGMTPIPEIDX], FALSE,  FALSE);
-		pTxInfo->QSEL = FIFO_EDCA;
-		pTxWI = (PTXWI_STRUC)&pWirelessPkt[TXINFO_SIZE];
-		RTMPWriteTxWI(pAd, pTxWI,  FALSE, FALSE, FALSE, FALSE, TRUE, FALSE, 0, BSSID_WCID, (sizeof(HEADER_802_11)),
-			0, 0, (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_HTTXOP, FALSE, &pAd->CommonCfg.MlmeTransmit);
-#ifdef RT_BIG_ENDIAN
-		RTMPWIEndianChange((PUCHAR)pTxWI, TYPE_TXWI);
-#endif // RT_BIG_ENDIAN //
-
-		RTMPMoveMemory(&pWirelessPkt[TXWI_SIZE+TXINFO_SIZE], &pAd->NullFrame, sizeof(HEADER_802_11));
-#ifdef RT_BIG_ENDIAN
-		RTMPFrameEndianChange(pAd, (PUCHAR)&pWirelessPkt[TXINFO_SIZE + TXWI_SIZE], DIR_WRITE, FALSE);
-#endif // RT_BIG_ENDIAN //
-		pAd->NullContext.BulkOutSize =  TXINFO_SIZE + TXWI_SIZE + sizeof(pAd->NullFrame) + 4;
-
-		// Fill out frame length information for global Bulk out arbitor
-		//pNullContext->BulkOutSize = TransferBufferLength;
-		DBGPRINT(RT_DEBUG_TRACE, ("SYNC - send NULL Frame @%d Mbps...\n", RateIdToMbps[pAd->CommonCfg.TxRate]));
-		RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NULL);
-
-		// Kick bulk out
-		RTUSBKickBulkOut(pAd);
-	}
-
-}
-
-#ifdef CONFIG_STA_SUPPORT
-/*
-	========================================================================
-
-	Routine	Description:
-		Check Rx descriptor, return NDIS_STATUS_FAILURE if any error dound
-
-	Arguments:
-		pRxD		Pointer	to the Rx descriptor
-
-	Return Value:
-		NDIS_STATUS_SUCCESS		No err
-		NDIS_STATUS_FAILURE		Error
-
-	Note:
-
-	========================================================================
-*/
-NDIS_STATUS	RTMPCheckRxError(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PHEADER_802_11	pHeader,
-	IN	PRXWI_STRUC	pRxWI,
-	IN	PRT28XX_RXD_STRUC	pRxINFO)
-{
-	PCIPHER_KEY pWpaKey;
-	INT	dBm;
-
-	if (pAd->bPromiscuous == TRUE)
-		return(NDIS_STATUS_SUCCESS);
-	if(pRxINFO == NULL)
-		return(NDIS_STATUS_FAILURE);
-
-	// Phy errors & CRC errors
-	if (pRxINFO->Crc)
-	{
-		// Check RSSI for Noise Hist statistic collection.
-		dBm = (INT) (pRxWI->RSSI0) - pAd->BbpRssiToDbmDelta;
-		if (dBm <= -87)
-			pAd->StaCfg.RPIDensity[0] += 1;
-		else if (dBm <= -82)
-			pAd->StaCfg.RPIDensity[1] += 1;
-		else if (dBm <= -77)
-			pAd->StaCfg.RPIDensity[2] += 1;
-		else if (dBm <= -72)
-			pAd->StaCfg.RPIDensity[3] += 1;
-		else if (dBm <= -67)
-			pAd->StaCfg.RPIDensity[4] += 1;
-		else if (dBm <= -62)
-			pAd->StaCfg.RPIDensity[5] += 1;
-		else if (dBm <= -57)
-			pAd->StaCfg.RPIDensity[6] += 1;
-		else if (dBm > -57)
-			pAd->StaCfg.RPIDensity[7] += 1;
-
-		return(NDIS_STATUS_FAILURE);
-	}
-
-	// Add Rx size to channel load counter, we should ignore error counts
-	pAd->StaCfg.CLBusyBytes += (pRxWI->MPDUtotalByteCount+ 14);
-
-	// Drop ToDs promiscous frame, it is opened due to CCX 2 channel load statistics
-	if (pHeader->FC.ToDs)
-	{
-		DBGPRINT_RAW(RT_DEBUG_ERROR, ("Err;FC.ToDs\n"));
-		return NDIS_STATUS_FAILURE;
-	}
-
-	// Paul 04-03 for OFDM Rx length issue
-	if (pRxWI->MPDUtotalByteCount > MAX_AGGREGATION_SIZE)
-	{
-		DBGPRINT_RAW(RT_DEBUG_ERROR, ("received packet too long\n"));
-		return NDIS_STATUS_FAILURE;
-	}
-
-	// Drop not U2M frames, cant's drop here because we will drop beacon in this case
-	// I am kind of doubting the U2M bit operation
-	// if (pRxD->U2M == 0)
-	//	return(NDIS_STATUS_FAILURE);
-
-	// drop decyption fail frame
-	if (pRxINFO->Decrypted && pRxINFO->CipherErr)
-	{
-
-		//
-		// MIC Error
-		//
-		if ((pRxINFO->CipherErr == 2) && pRxINFO->MyBss)
-		{
-			pWpaKey = &pAd->SharedKey[BSS0][pRxWI->KeyIndex];
-			RTMPReportMicError(pAd, pWpaKey);
-			DBGPRINT_RAW(RT_DEBUG_ERROR,("Rx MIC Value error\n"));
-		}
-
-		if (pRxINFO->Decrypted &&
-			(pAd->SharedKey[BSS0][pRxWI->KeyIndex].CipherAlg == CIPHER_AES) &&
-			(pHeader->Sequence == pAd->FragFrame.Sequence))
-		{
-			//
-			// Acceptable since the First FragFrame no CipherErr problem.
-			//
-			return(NDIS_STATUS_SUCCESS);
-		}
-
-		return(NDIS_STATUS_FAILURE);
-	}
-
-	return(NDIS_STATUS_SUCCESS);
-}
-
-VOID RT28xxUsbStaAsicForceWakeup(
-	IN PRTMP_ADAPTER pAd,
-	IN BOOLEAN       bFromTx)
-{
-    AUTO_WAKEUP_STRUC	AutoWakeupCfg;
-
-	AutoWakeupCfg.word = 0;
-	RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
-
-	AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x02);
-
-	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
-}
-
-VOID RT28xxUsbStaAsicSleepThenAutoWakeup(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT TbttNumToNextWakeUp)
-{
-	AUTO_WAKEUP_STRUC	AutoWakeupCfg;
-
-	// we have decided to SLEEP, so at least do it for a BEACON period.
-	if (TbttNumToNextWakeUp == 0)
-		TbttNumToNextWakeUp = 1;
-
-	AutoWakeupCfg.word = 0;
-	RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
-
-	AutoWakeupCfg.field.NumofSleepingTbtt = TbttNumToNextWakeUp - 1;
-	AutoWakeupCfg.field.EnableAutoWakeup = 1;
-	AutoWakeupCfg.field.AutoLeadTime = 5;
-	RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
-
-	AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x02);   // send POWER-SAVE command to MCU. Timeout 40us.
-
-	OPSTATUS_SET_FLAG(pAd, fOP_STATUS_DOZE);
-
-}
-#endif // CONFIG_STA_SUPPORT //
-
-VOID RT28xxUsbMlmeRadioOn(
-	IN PRTMP_ADAPTER pAd)
-{
-    DBGPRINT(RT_DEBUG_TRACE,("RT28xxUsbMlmeRadioOn()\n"));
-
-	if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))
-		return;
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-    	AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x02);
-		RTMPusecDelay(10000);
-	}
-#endif // CONFIG_STA_SUPPORT //
-	NICResetFromError(pAd);
-
-	// Enable Tx/Rx
-	RTMPEnableRxTx(pAd);
-
-#ifdef RT3070
-	if (IS_RT3071(pAd))
-	{
-		RT30xxReverseRFSleepModeSetup(pAd);
-	}
-#endif // RT3070 //
-
-	// Clear Radio off flag
-	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		RTUSBBulkReceive(pAd);
-#endif // CONFIG_STA_SUPPORT //
-
-	// Set LED
-	RTMPSetLED(pAd, LED_RADIO_ON);
-}
-
-VOID RT28xxUsbMlmeRadioOFF(
-	IN PRTMP_ADAPTER pAd)
-{
-	WPDMA_GLO_CFG_STRUC	GloCfg;
-	UINT32	Value, i;
-
-	DBGPRINT(RT_DEBUG_TRACE,("RT28xxUsbMlmeRadioOFF()\n"));
-
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))
-		return;
-
-	// Set LED
-	RTMPSetLED(pAd, LED_RADIO_OFF);
-	// Set Radio off flag
-	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// Link down first if any association exists
-		if (INFRA_ON(pAd) || ADHOC_ON(pAd))
-			LinkDown(pAd, FALSE);
-		RTMPusecDelay(10000);
-
-		//==========================================
-		// Clean up old bss table
-		BssTableInit(&pAd->ScanTab);
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-
-	if (pAd->CommonCfg.BBPCurrentBW == BW_40)
-	{
-		// Must using 40MHz.
-		AsicTurnOffRFClk(pAd, pAd->CommonCfg.CentralChannel);
-	}
-	else
-	{
-		// Must using 20MHz.
-		AsicTurnOffRFClk(pAd, pAd->CommonCfg.Channel);
-	}
-
-	// Disable Tx/Rx DMA
-	RTUSBReadMACRegister(pAd, WPDMA_GLO_CFG, &GloCfg.word);	   // disable DMA
-	GloCfg.field.EnableTxDMA = 0;
-	GloCfg.field.EnableRxDMA = 0;
-	RTUSBWriteMACRegister(pAd, WPDMA_GLO_CFG, GloCfg.word);	   // abort all TX rings
-
-	// Waiting for DMA idle
-	i = 0;
-	do
-	{
-		RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &GloCfg.word);
-		if ((GloCfg.field.TxDMABusy == 0) && (GloCfg.field.RxDMABusy == 0))
-			break;
-
-		RTMPusecDelay(1000);
-	}while (i++ < 100);
-
-	// Disable MAC Tx/Rx
-	RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-	Value &= (0xfffffff3);
-	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-	// MAC_SYS_CTRL => value = 0x0 => 40mA
-	//RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0);
-
-	// PWR_PIN_CFG => value = 0x0 => 40mA
-	//RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0);
-
-	// TX_PIN_CFG => value = 0x0 => 20mA
-	//RTMP_IO_WRITE32(pAd, TX_PIN_CFG, 0);
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x02);
-#endif // CONFIG_STA_SUPPORT //
-}
-
+#include "../../rt2870/common/cmm_data_2870.c"
diff --git a/drivers/staging/rt3070/common/cmm_info.c b/drivers/staging/rt3070/common/cmm_info.c
index 54cb1a35f7b..6e981e523fb 100644
--- a/drivers/staging/rt3070/common/cmm_info.c
+++ b/drivers/staging/rt3070/common/cmm_info.c
@@ -1,3395 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-*/
-
-#include	"../rt_config.h"
-
-INT	Show_SSID_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_WirelessMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_TxBurst_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_TxPreamble_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_TxPower_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_Channel_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_BGProtection_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_RTSThreshold_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_FragThreshold_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-#ifdef DOT11_N_SUPPORT
-INT	Show_HtBw_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_HtMcs_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_HtGi_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_HtOpMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_HtExtcha_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_HtMpduDensity_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_HtBaWinSize_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_HtRdg_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_HtAmsdu_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_HtAutoBa_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-#endif // DOT11_N_SUPPORT //
-
-INT	Show_CountryRegion_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_CountryRegionABand_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_CountryCode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-#ifdef AGGREGATION_SUPPORT
-INT	Show_PktAggregate_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-#endif // AGGREGATION_SUPPORT //
-
-#ifdef WMM_SUPPORT
-INT	Show_WmmCapable_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-#endif // WMM_SUPPORT //
-
-INT	Show_IEEE80211H_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-#ifdef CONFIG_STA_SUPPORT
-INT	Show_NetworkType_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-#endif // CONFIG_STA_SUPPORT //
-
-INT	Show_AuthMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_EncrypType_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_DefaultKeyID_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_Key1_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_Key2_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_Key3_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_Key4_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-INT	Show_WPAPSK_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf);
-
-static struct {
-	CHAR *name;
-	INT (*show_proc)(PRTMP_ADAPTER pAdapter, PUCHAR arg);
-} *PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC, RTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC[] = {
-	{"SSID",					Show_SSID_Proc},
-	{"WirelessMode",			Show_WirelessMode_Proc},
-	{"TxBurst",					Show_TxBurst_Proc},
-	{"TxPreamble",				Show_TxPreamble_Proc},
-	{"TxPower",					Show_TxPower_Proc},
-	{"Channel",					Show_Channel_Proc},
-	{"BGProtection",			Show_BGProtection_Proc},
-	{"RTSThreshold",			Show_RTSThreshold_Proc},
-	{"FragThreshold",			Show_FragThreshold_Proc},
-#ifdef DOT11_N_SUPPORT
-	{"HtBw",					Show_HtBw_Proc},
-	{"HtMcs",					Show_HtMcs_Proc},
-	{"HtGi",					Show_HtGi_Proc},
-	{"HtOpMode",				Show_HtOpMode_Proc},
-	{"HtExtcha",				Show_HtExtcha_Proc},
-	{"HtMpduDensity",			Show_HtMpduDensity_Proc},
-	{"HtBaWinSize",		        Show_HtBaWinSize_Proc},
-	{"HtRdg",		        	Show_HtRdg_Proc},
-	{"HtAmsdu",		        	Show_HtAmsdu_Proc},
-	{"HtAutoBa",		        Show_HtAutoBa_Proc},
-#endif // DOT11_N_SUPPORT //
-	{"CountryRegion",			Show_CountryRegion_Proc},
-	{"CountryRegionABand",		Show_CountryRegionABand_Proc},
-	{"CountryCode",				Show_CountryCode_Proc},
-#ifdef AGGREGATION_SUPPORT
-	{"PktAggregate",			Show_PktAggregate_Proc},
-#endif
-
-#ifdef WMM_SUPPORT
-	{"WmmCapable",				Show_WmmCapable_Proc},
-#endif
-	{"IEEE80211H",				Show_IEEE80211H_Proc},
-#ifdef CONFIG_STA_SUPPORT
-    {"NetworkType",				Show_NetworkType_Proc},
-#endif // CONFIG_STA_SUPPORT //
-	{"AuthMode",				Show_AuthMode_Proc},
-	{"EncrypType",				Show_EncrypType_Proc},
-	{"DefaultKeyID",			Show_DefaultKeyID_Proc},
-	{"Key1",					Show_Key1_Proc},
-	{"Key2",					Show_Key2_Proc},
-	{"Key3",					Show_Key3_Proc},
-	{"Key4",					Show_Key4_Proc},
-	{"WPAPSK",					Show_WPAPSK_Proc},
-	{NULL, NULL}
-};
-
-/*
-    ==========================================================================
-    Description:
-        Get Driver version.
-
-    Return:
-    ==========================================================================
-*/
-INT Set_DriverVersion_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		DBGPRINT(RT_DEBUG_TRACE, ("Driver version-%s\n", STA_DRIVER_VERSION));
-#endif // CONFIG_STA_SUPPORT //
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Country Region.
-        This command will not work, if the field of CountryRegion in eeprom is programmed.
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_CountryRegion_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG region;
-
-	region = simple_strtol(arg, 0, 10);
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-	return -EOPNOTSUPP;
-#endif // EXT_BUILD_CHANNEL_LIST //
-
-	// Country can be set only when EEPROM not programmed
-	if (pAd->CommonCfg.CountryRegion & 0x80)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("Set_CountryRegion_Proc::parameter of CountryRegion in eeprom is programmed \n"));
-		return FALSE;
-	}
-
-	if((region >= 0) && (region <= REGION_MAXIMUM_BG_BAND))
-	{
-		pAd->CommonCfg.CountryRegion = (UCHAR) region;
-	}
-	else if (region == REGION_31_BG_BAND)
-	{
-		pAd->CommonCfg.CountryRegion = (UCHAR) region;
-	}
-	else
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("Set_CountryRegion_Proc::parameters out of range\n"));
-		return FALSE;
-	}
-
-	// if set country region, driver needs to be reset
-	BuildChannelList(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_CountryRegion_Proc::(CountryRegion=%d)\n", pAd->CommonCfg.CountryRegion));
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Country Region for A band.
-        This command will not work, if the field of CountryRegion in eeprom is programmed.
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_CountryRegionABand_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG region;
-
-	region = simple_strtol(arg, 0, 10);
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-	return -EOPNOTSUPP;
-#endif // EXT_BUILD_CHANNEL_LIST //
-
-	// Country can be set only when EEPROM not programmed
-	if (pAd->CommonCfg.CountryRegionForABand & 0x80)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("Set_CountryRegionABand_Proc::parameter of CountryRegion in eeprom is programmed \n"));
-		return FALSE;
-	}
-
-	if((region >= 0) && (region <= REGION_MAXIMUM_A_BAND))
-	{
-		pAd->CommonCfg.CountryRegionForABand = (UCHAR) region;
-	}
-	else
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("Set_CountryRegionABand_Proc::parameters out of range\n"));
-		return FALSE;
-	}
-
-	// if set country region, driver needs to be reset
-	BuildChannelList(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_CountryRegionABand_Proc::(CountryRegion=%d)\n", pAd->CommonCfg.CountryRegionForABand));
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Wireless Mode
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_WirelessMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG	WirelessMode;
-	INT		success = TRUE;
-
-	WirelessMode = simple_strtol(arg, 0, 10);
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		INT MaxPhyMode = PHY_11G;
-
-#ifdef DOT11_N_SUPPORT
-		MaxPhyMode = PHY_11N_5G;
-#endif // DOT11_N_SUPPORT //
-
-		if (WirelessMode <= MaxPhyMode)
-		{
-			RTMPSetPhyMode(pAd, WirelessMode);
-#ifdef DOT11_N_SUPPORT
-			if (WirelessMode >= PHY_11ABGN_MIXED)
-			{
-				pAd->CommonCfg.BACapability.field.AutoBA = TRUE;
-				pAd->CommonCfg.REGBACapability.field.AutoBA = TRUE;
-			}
-			else
-			{
-				pAd->CommonCfg.BACapability.field.AutoBA = FALSE;
-				pAd->CommonCfg.REGBACapability.field.AutoBA = FALSE;
-			}
-#endif // DOT11_N_SUPPORT //
-			// Set AdhocMode rates
-			if (pAd->StaCfg.BssType == BSS_ADHOC)
-			{
-				MlmeUpdateTxRates(pAd, FALSE, 0);
-				MakeIbssBeacon(pAd);           // re-build BEACON frame
-				AsicEnableIbssSync(pAd);       // copy to on-chip memory
-			}
-		}
-		else
-		{
-			success = FALSE;
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	// it is needed to set SSID to take effect
-	if (success == TRUE)
-	{
-#ifdef DOT11_N_SUPPORT
-		SetCommonHT(pAd);
-#endif // DOT11_N_SUPPORT //
-		DBGPRINT(RT_DEBUG_TRACE, ("Set_WirelessMode_Proc::(=%ld)\n", WirelessMode));
-	}
-	else
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("Set_WirelessMode_Proc::parameters out of range\n"));
-	}
-
-	return success;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Channel
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_Channel_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
- 	INT		success = TRUE;
-	UCHAR	Channel;
-
-	Channel = (UCHAR) simple_strtol(arg, 0, 10);
-
-	// check if this channel is valid
-	if (ChannelSanity(pAd, Channel) == TRUE)
-	{
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			pAd->CommonCfg.Channel = Channel;
-
-			if (MONITOR_ON(pAd))
-			{
-#ifdef DOT11_N_SUPPORT
-				N_ChannelCheck(pAd);
-				if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED &&
-					pAd->CommonCfg.RegTransmitSetting.field.BW == BW_40)
-				{
-					N_SetCenCh(pAd);
-					AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
-					AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
-					DBGPRINT(RT_DEBUG_TRACE, ("BW_40, control_channel(%d), CentralChannel(%d) \n",
-								pAd->CommonCfg.Channel, pAd->CommonCfg.CentralChannel));
-				}
-				else
-#endif // DOT11_N_SUPPORT //
-				{
-					AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
-					AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-					DBGPRINT(RT_DEBUG_TRACE, ("BW_20, Channel(%d)\n", pAd->CommonCfg.Channel));
-				}
-			}
-		}
-#endif // CONFIG_STA_SUPPORT //
-		success = TRUE;
-	}
-	else
-	{
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			success = FALSE;
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-
-	if (success == TRUE)
-		DBGPRINT(RT_DEBUG_TRACE, ("Set_Channel_Proc::(Channel=%d)\n", pAd->CommonCfg.Channel));
-
-	return success;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Short Slot Time Enable or Disable
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ShortSlot_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG ShortSlot;
-
-	ShortSlot = simple_strtol(arg, 0, 10);
-
-	if (ShortSlot == 1)
-		pAd->CommonCfg.bUseShortSlotTime = TRUE;
-	else if (ShortSlot == 0)
-		pAd->CommonCfg.bUseShortSlotTime = FALSE;
-	else
-		return FALSE;  //Invalid argument
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_ShortSlot_Proc::(ShortSlot=%d)\n", pAd->CommonCfg.bUseShortSlotTime));
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Tx power
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_TxPower_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG TxPower;
-	INT   success = FALSE;
-
-	TxPower = (ULONG) simple_strtol(arg, 0, 10);
-	if (TxPower <= 100)
-	{
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			pAd->CommonCfg.TxPowerDefault = TxPower;
-			pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault;
-		}
-#endif // CONFIG_STA_SUPPORT //
-		success = TRUE;
-	}
-	else
-		success = FALSE;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_TxPower_Proc::(TxPowerPercentage=%ld)\n", pAd->CommonCfg.TxPowerPercentage));
-
-	return success;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set 11B/11G Protection
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_BGProtection_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	switch (simple_strtol(arg, 0, 10))
-	{
-		case 0: //AUTO
-			pAd->CommonCfg.UseBGProtection = 0;
-			break;
-		case 1: //Always On
-			pAd->CommonCfg.UseBGProtection = 1;
-			break;
-		case 2: //Always OFF
-			pAd->CommonCfg.UseBGProtection = 2;
-			break;
-		default:  //Invalid argument
-			return FALSE;
-	}
-
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_BGProtection_Proc::(BGProtection=%ld)\n", pAd->CommonCfg.UseBGProtection));
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set TxPreamble
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_TxPreamble_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	RT_802_11_PREAMBLE	Preamble;
-
-	Preamble = simple_strtol(arg, 0, 10);
-
-
-	switch (Preamble)
-	{
-		case Rt802_11PreambleShort:
-			pAd->CommonCfg.TxPreamble = Preamble;
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				MlmeSetTxPreamble(pAd, Rt802_11PreambleShort);
-#endif // CONFIG_STA_SUPPORT //
-			break;
-		case Rt802_11PreambleLong:
-#ifdef CONFIG_STA_SUPPORT
-		case Rt802_11PreambleAuto:
-			// if user wants AUTO, initialize to LONG here, then change according to AP's
-			// capability upon association.
-#endif // CONFIG_STA_SUPPORT //
-			pAd->CommonCfg.TxPreamble = Preamble;
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				MlmeSetTxPreamble(pAd, Rt802_11PreambleLong);
-#endif // CONFIG_STA_SUPPORT //
-			break;
-		default: //Invalid argument
-			return FALSE;
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_TxPreamble_Proc::(TxPreamble=%ld)\n", pAd->CommonCfg.TxPreamble));
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set RTS Threshold
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_RTSThreshold_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	 NDIS_802_11_RTS_THRESHOLD           RtsThresh;
-
-	RtsThresh = simple_strtol(arg, 0, 10);
-
-	if((RtsThresh > 0) && (RtsThresh <= MAX_RTS_THRESHOLD))
-		pAd->CommonCfg.RtsThreshold  = (USHORT)RtsThresh;
-#ifdef CONFIG_STA_SUPPORT
-	else if (RtsThresh == 0)
-		pAd->CommonCfg.RtsThreshold = MAX_RTS_THRESHOLD;
-#endif // CONFIG_STA_SUPPORT //
-	else
-		return FALSE; //Invalid argument
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_RTSThreshold_Proc::(RTSThreshold=%d)\n", pAd->CommonCfg.RtsThreshold));
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Fragment Threshold
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_FragThreshold_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	 NDIS_802_11_FRAGMENTATION_THRESHOLD     FragThresh;
-
-	FragThresh = simple_strtol(arg, 0, 10);
-
-	if (FragThresh > MAX_FRAG_THRESHOLD || FragThresh < MIN_FRAG_THRESHOLD)
-	{
-		//Illegal FragThresh so we set it to default
-		pAd->CommonCfg.FragmentThreshold = MAX_FRAG_THRESHOLD;
-	}
-	else if (FragThresh % 2 == 1)
-	{
-		// The length of each fragment shall always be an even number of octets, except for the last fragment
-		// of an MSDU or MMPDU, which may be either an even or an odd number of octets.
-		pAd->CommonCfg.FragmentThreshold = (USHORT)(FragThresh - 1);
-	}
-	else
-	{
-		pAd->CommonCfg.FragmentThreshold = (USHORT)FragThresh;
-	}
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if (pAd->CommonCfg.FragmentThreshold == MAX_FRAG_THRESHOLD)
-			pAd->CommonCfg.bUseZeroToDisableFragment = TRUE;
-		else
-			pAd->CommonCfg.bUseZeroToDisableFragment = FALSE;
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_FragThreshold_Proc::(FragThreshold=%d)\n", pAd->CommonCfg.FragmentThreshold));
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set TxBurst
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_TxBurst_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG TxBurst;
-
-	TxBurst = simple_strtol(arg, 0, 10);
-	if (TxBurst == 1)
-		pAd->CommonCfg.bEnableTxBurst = TRUE;
-	else if (TxBurst == 0)
-		pAd->CommonCfg.bEnableTxBurst = FALSE;
-	else
-		return FALSE;  //Invalid argument
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_TxBurst_Proc::(TxBurst=%d)\n", pAd->CommonCfg.bEnableTxBurst));
-
-	return TRUE;
-}
-
-#ifdef AGGREGATION_SUPPORT
-/*
-    ==========================================================================
-    Description:
-        Set TxBurst
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_PktAggregate_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG aggre;
-
-	aggre = simple_strtol(arg, 0, 10);
-
-	if (aggre == 1)
-		pAd->CommonCfg.bAggregationCapable = TRUE;
-	else if (aggre == 0)
-		pAd->CommonCfg.bAggregationCapable = FALSE;
-	else
-		return FALSE;  //Invalid argument
-
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_PktAggregate_Proc::(AGGRE=%d)\n", pAd->CommonCfg.bAggregationCapable));
-
-	return TRUE;
-}
-#endif
-
-/*
-    ==========================================================================
-    Description:
-        Set IEEE80211H.
-        This parameter is 1 when needs radar detection, otherwise 0
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_IEEE80211H_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-    ULONG ieee80211h;
-
-	ieee80211h = simple_strtol(arg, 0, 10);
-
-	if (ieee80211h == 1)
-		pAd->CommonCfg.bIEEE80211H = TRUE;
-	else if (ieee80211h == 0)
-		pAd->CommonCfg.bIEEE80211H = FALSE;
-	else
-		return FALSE;  //Invalid argument
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_IEEE80211H_Proc::(IEEE80211H=%d)\n", pAd->CommonCfg.bIEEE80211H));
-
-	return TRUE;
-}
-
-
-#ifdef DBG
-/*
-    ==========================================================================
-    Description:
-        For Debug information
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_Debug_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	DBGPRINT(RT_DEBUG_TRACE, ("==> Set_Debug_Proc *******************\n"));
-
-    if(simple_strtol(arg, 0, 10) <= RT_DEBUG_LOUD)
-        RTDebugLevel = simple_strtol(arg, 0, 10);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<== Set_Debug_Proc(RTDebugLevel = %ld)\n", RTDebugLevel));
-
-	return TRUE;
-}
-#endif
-
-INT	Show_DescInfo_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Reset statistics counter
-
-    Arguments:
-        pAdapter            Pointer to our adapter
-        arg
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ResetStatCounter_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	//UCHAR           i;
-	//MAC_TABLE_ENTRY *pEntry;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("==>Set_ResetStatCounter_Proc\n"));
-
-	// add the most up-to-date h/w raw counters into software counters
-	NICUpdateRawCounters(pAd);
-
-	NdisZeroMemory(&pAd->WlanCounters, sizeof(COUNTER_802_11));
-	NdisZeroMemory(&pAd->Counters8023, sizeof(COUNTER_802_3));
-	NdisZeroMemory(&pAd->RalinkCounters, sizeof(COUNTER_RALINK));
-
-	return TRUE;
-}
-
-BOOLEAN RTMPCheckStrPrintAble(
-    IN  CHAR *pInPutStr,
-    IN  UCHAR strLen)
-{
-    UCHAR i=0;
-
-    for (i=0; i<strLen; i++)
-    {
-        if ((pInPutStr[i] < 0x21) ||
-            (pInPutStr[i] > 0x7E))
-            return FALSE;
-    }
-
-    return TRUE;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Remove WPA Key process
-
-	Arguments:
-		pAd 					Pointer to our adapter
-		pBuf							Pointer to the where the key stored
-
-	Return Value:
-		NDIS_SUCCESS					Add key successfully
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-#ifdef CONFIG_STA_SUPPORT
-VOID    RTMPSetDesiredRates(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  LONG            Rates)
-{
-    NDIS_802_11_RATES aryRates;
-
-    memset(&aryRates, 0x00, sizeof(NDIS_802_11_RATES));
-    switch (pAdapter->CommonCfg.PhyMode)
-    {
-        case PHY_11A: // A only
-            switch (Rates)
-            {
-                case 6000000: //6M
-                    aryRates[0] = 0x0c; // 6M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_0;
-                    break;
-                case 9000000: //9M
-                    aryRates[0] = 0x12; // 9M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_1;
-                    break;
-                case 12000000: //12M
-                    aryRates[0] = 0x18; // 12M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_2;
-                    break;
-                case 18000000: //18M
-                    aryRates[0] = 0x24; // 18M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_3;
-                    break;
-                case 24000000: //24M
-                    aryRates[0] = 0x30; // 24M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_4;
-                    break;
-                case 36000000: //36M
-                    aryRates[0] = 0x48; // 36M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_5;
-                    break;
-                case 48000000: //48M
-                    aryRates[0] = 0x60; // 48M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_6;
-                    break;
-                case 54000000: //54M
-                    aryRates[0] = 0x6c; // 54M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_7;
-                    break;
-                case -1: //Auto
-                default:
-                    aryRates[0] = 0x6c; // 54Mbps
-                    aryRates[1] = 0x60; // 48Mbps
-                    aryRates[2] = 0x48; // 36Mbps
-                    aryRates[3] = 0x30; // 24Mbps
-                    aryRates[4] = 0x24; // 18M
-                    aryRates[5] = 0x18; // 12M
-                    aryRates[6] = 0x12; // 9M
-                    aryRates[7] = 0x0c; // 6M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
-                    break;
-            }
-            break;
-        case PHY_11BG_MIXED: // B/G Mixed
-        case PHY_11B: // B only
-        case PHY_11ABG_MIXED: // A/B/G Mixed
-        default:
-            switch (Rates)
-            {
-                case 1000000: //1M
-                    aryRates[0] = 0x02;
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_0;
-                    break;
-                case 2000000: //2M
-                    aryRates[0] = 0x04;
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_1;
-                    break;
-                case 5000000: //5.5M
-                    aryRates[0] = 0x0b; // 5.5M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_2;
-                    break;
-                case 11000000: //11M
-                    aryRates[0] = 0x16; // 11M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_3;
-                    break;
-                case 6000000: //6M
-                    aryRates[0] = 0x0c; // 6M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_0;
-                    break;
-                case 9000000: //9M
-                    aryRates[0] = 0x12; // 9M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_1;
-                    break;
-                case 12000000: //12M
-                    aryRates[0] = 0x18; // 12M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_2;
-                    break;
-                case 18000000: //18M
-                    aryRates[0] = 0x24; // 18M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_3;
-                    break;
-                case 24000000: //24M
-                    aryRates[0] = 0x30; // 24M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_4;
-                    break;
-                case 36000000: //36M
-                    aryRates[0] = 0x48; // 36M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_5;
-                    break;
-                case 48000000: //48M
-                    aryRates[0] = 0x60; // 48M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_6;
-                    break;
-                case 54000000: //54M
-                    aryRates[0] = 0x6c; // 54M
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_7;
-                    break;
-                case -1: //Auto
-                default:
-                    if (pAdapter->CommonCfg.PhyMode == PHY_11B)
-                    { //B Only
-                        aryRates[0] = 0x16; // 11Mbps
-                        aryRates[1] = 0x0b; // 5.5Mbps
-                        aryRates[2] = 0x04; // 2Mbps
-                        aryRates[3] = 0x02; // 1Mbps
-                    }
-                    else
-                    { //(B/G) Mixed or (A/B/G) Mixed
-                        aryRates[0] = 0x6c; // 54Mbps
-                        aryRates[1] = 0x60; // 48Mbps
-                        aryRates[2] = 0x48; // 36Mbps
-                        aryRates[3] = 0x30; // 24Mbps
-                        aryRates[4] = 0x16; // 11Mbps
-                        aryRates[5] = 0x0b; // 5.5Mbps
-                        aryRates[6] = 0x04; // 2Mbps
-                        aryRates[7] = 0x02; // 1Mbps
-                    }
-                    pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
-                    break;
-            }
-            break;
-    }
-
-    NdisZeroMemory(pAdapter->CommonCfg.DesireRate, MAX_LEN_OF_SUPPORTED_RATES);
-    NdisMoveMemory(pAdapter->CommonCfg.DesireRate, &aryRates, sizeof(NDIS_802_11_RATES));
-    DBGPRINT(RT_DEBUG_TRACE, (" RTMPSetDesiredRates (%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x)\n",
-        pAdapter->CommonCfg.DesireRate[0],pAdapter->CommonCfg.DesireRate[1],
-        pAdapter->CommonCfg.DesireRate[2],pAdapter->CommonCfg.DesireRate[3],
-        pAdapter->CommonCfg.DesireRate[4],pAdapter->CommonCfg.DesireRate[5],
-        pAdapter->CommonCfg.DesireRate[6],pAdapter->CommonCfg.DesireRate[7] ));
-    // Changing DesiredRate may affect the MAX TX rate we used to TX frames out
-    MlmeUpdateTxRates(pAdapter, FALSE, 0);
-}
-
-NDIS_STATUS RTMPWPARemoveKeyProc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PVOID			pBuf)
-{
-	PNDIS_802_11_REMOVE_KEY pKey;
-	ULONG					KeyIdx;
-	NDIS_STATUS 			Status = NDIS_STATUS_FAILURE;
-	BOOLEAN 	bTxKey; 		// Set the key as transmit key
-	BOOLEAN 	bPairwise;		// Indicate the key is pairwise key
-	BOOLEAN 	bKeyRSC;		// indicate the receive  SC set by KeyRSC value.
-								// Otherwise, it will set by the NIC.
-	BOOLEAN 	bAuthenticator; // indicate key is set by authenticator.
-	INT 		i;
-
-	DBGPRINT(RT_DEBUG_TRACE,("---> RTMPWPARemoveKeyProc\n"));
-
-	pKey = (PNDIS_802_11_REMOVE_KEY) pBuf;
-	KeyIdx = pKey->KeyIndex & 0xff;
-	// Bit 31 of Add-key, Tx Key
-	bTxKey		   = (pKey->KeyIndex & 0x80000000) ? TRUE : FALSE;
-	// Bit 30 of Add-key PairwiseKey
-	bPairwise	   = (pKey->KeyIndex & 0x40000000) ? TRUE : FALSE;
-	// Bit 29 of Add-key KeyRSC
-	bKeyRSC 	   = (pKey->KeyIndex & 0x20000000) ? TRUE : FALSE;
-	// Bit 28 of Add-key Authenticator
-	bAuthenticator = (pKey->KeyIndex & 0x10000000) ? TRUE : FALSE;
-
-	// 1. If bTx is TRUE, return failure information
-	if (bTxKey == TRUE)
-		return(NDIS_STATUS_INVALID_DATA);
-
-	// 2. Check Pairwise Key
-	if (bPairwise)
-	{
-		// a. If BSSID is broadcast, remove all pairwise keys.
-		// b. If not broadcast, remove the pairwise specified by BSSID
-		for (i = 0; i < SHARE_KEY_NUM; i++)
-		{
-			if (MAC_ADDR_EQUAL(pAd->SharedKey[BSS0][i].BssId, pKey->BSSID))
-			{
-				DBGPRINT(RT_DEBUG_TRACE,("RTMPWPARemoveKeyProc(KeyIdx=%d)\n", i));
-				pAd->SharedKey[BSS0][i].KeyLen = 0;
-				pAd->SharedKey[BSS0][i].CipherAlg = CIPHER_NONE;
-				AsicRemoveSharedKeyEntry(pAd, BSS0, (UCHAR)i);
-				Status = NDIS_STATUS_SUCCESS;
-				break;
-			}
-		}
-	}
-	// 3. Group Key
-	else
-	{
-		// a. If BSSID is broadcast, remove all group keys indexed
-		// b. If BSSID matched, delete the group key indexed.
-		DBGPRINT(RT_DEBUG_TRACE,("RTMPWPARemoveKeyProc(KeyIdx=%ld)\n", KeyIdx));
-		pAd->SharedKey[BSS0][KeyIdx].KeyLen = 0;
-		pAd->SharedKey[BSS0][KeyIdx].CipherAlg = CIPHER_NONE;
-		AsicRemoveSharedKeyEntry(pAd, BSS0, (UCHAR)KeyIdx);
-		Status = NDIS_STATUS_SUCCESS;
-	}
-
-	return (Status);
-}
-#endif // CONFIG_STA_SUPPORT //
-
-
-#ifdef CONFIG_STA_SUPPORT
-/*
-	========================================================================
-
-	Routine Description:
-		Remove All WPA Keys
-
-	Arguments:
-		pAd 					Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPWPARemoveAllKeys(
-	IN	PRTMP_ADAPTER	pAd)
-{
-
-	UCHAR 	i;
-
-	DBGPRINT(RT_DEBUG_TRACE,("RTMPWPARemoveAllKeys(AuthMode=%d, WepStatus=%d)\n", pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus));
-
-	// For WEP/CKIP, there is no need to remove it, since WinXP won't set it again after
-	// Link up. And it will be replaced if user changed it.
-	if (pAd->StaCfg.AuthMode < Ndis802_11AuthModeWPA)
-		return;
-
-	// For WPA-None, there is no need to remove it, since WinXP won't set it again after
-	// Link up. And it will be replaced if user changed it.
-	if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
-		return;
-
-	// set BSSID wcid entry of the Pair-wise Key table as no-security mode
-	AsicRemovePairwiseKeyEntry(pAd, BSS0, BSSID_WCID);
-
-	// set all shared key mode as no-security.
-	for (i = 0; i < SHARE_KEY_NUM; i++)
-    {
-		DBGPRINT(RT_DEBUG_TRACE,("remove %s key #%d\n", CipherName[pAd->SharedKey[BSS0][i].CipherAlg], i));
-		NdisZeroMemory(&pAd->SharedKey[BSS0][i], sizeof(CIPHER_KEY));
-
-		AsicRemoveSharedKeyEntry(pAd, BSS0, i);
-	}
-
-}
-#endif // CONFIG_STA_SUPPORT //
-
-/*
-	========================================================================
-	Routine Description:
-		Change NIC PHY mode. Re-association may be necessary. possible settings
-		include - PHY_11B, PHY_11BG_MIXED, PHY_11A, and PHY_11ABG_MIXED
-
-	Arguments:
-		pAd - Pointer to our adapter
-		phymode  -
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	========================================================================
-*/
-VOID	RTMPSetPhyMode(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	ULONG phymode)
-{
-	INT i;
-	// the selected phymode must be supported by the RF IC encoded in E2PROM
-
-	pAd->CommonCfg.PhyMode = (UCHAR)phymode;
-
-	DBGPRINT(RT_DEBUG_TRACE,("RTMPSetPhyMode : PhyMode=%d, channel=%d \n", pAd->CommonCfg.PhyMode, pAd->CommonCfg.Channel));
-#ifdef EXT_BUILD_CHANNEL_LIST
-	BuildChannelListEx(pAd);
-#else
-	BuildChannelList(pAd);
-#endif // EXT_BUILD_CHANNEL_LIST //
-
-	// sanity check user setting
-	for (i = 0; i < pAd->ChannelListNum; i++)
-	{
-		if (pAd->CommonCfg.Channel == pAd->ChannelList[i].Channel)
-			break;
-	}
-
-	if (i == pAd->ChannelListNum)
-	{
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			pAd->CommonCfg.Channel = FirstChannel(pAd);
-#endif // CONFIG_STA_SUPPORT //
-		DBGPRINT(RT_DEBUG_ERROR, ("RTMPSetPhyMode: channel is out of range, use first channel=%d \n", pAd->CommonCfg.Channel));
-	}
-
-	NdisZeroMemory(pAd->CommonCfg.SupRate, MAX_LEN_OF_SUPPORTED_RATES);
-	NdisZeroMemory(pAd->CommonCfg.ExtRate, MAX_LEN_OF_SUPPORTED_RATES);
-	NdisZeroMemory(pAd->CommonCfg.DesireRate, MAX_LEN_OF_SUPPORTED_RATES);
-	switch (phymode) {
-		case PHY_11B:
-			pAd->CommonCfg.SupRate[0]  = 0x82;	  // 1 mbps, in units of 0.5 Mbps, basic rate
-			pAd->CommonCfg.SupRate[1]  = 0x84;	  // 2 mbps, in units of 0.5 Mbps, basic rate
-			pAd->CommonCfg.SupRate[2]  = 0x8B;	  // 5.5 mbps, in units of 0.5 Mbps, basic rate
-			pAd->CommonCfg.SupRate[3]  = 0x96;	  // 11 mbps, in units of 0.5 Mbps, basic rate
-			pAd->CommonCfg.SupRateLen  = 4;
-			pAd->CommonCfg.ExtRateLen  = 0;
-			pAd->CommonCfg.DesireRate[0]  = 2;	   // 1 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[1]  = 4;	   // 2 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[2]  = 11;    // 5.5 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[3]  = 22;    // 11 mbps, in units of 0.5 Mbps
-			//pAd->CommonCfg.HTPhyMode.field.MODE = MODE_CCK; // This MODE is only FYI. not use
-			break;
-
-		case PHY_11G:
-		case PHY_11BG_MIXED:
-		case PHY_11ABG_MIXED:
-#ifdef DOT11_N_SUPPORT
-		case PHY_11N_2_4G:
-		case PHY_11ABGN_MIXED:
-		case PHY_11BGN_MIXED:
-		case PHY_11GN_MIXED:
-#endif // DOT11_N_SUPPORT //
-			pAd->CommonCfg.SupRate[0]  = 0x82;	  // 1 mbps, in units of 0.5 Mbps, basic rate
-			pAd->CommonCfg.SupRate[1]  = 0x84;	  // 2 mbps, in units of 0.5 Mbps, basic rate
-			pAd->CommonCfg.SupRate[2]  = 0x8B;	  // 5.5 mbps, in units of 0.5 Mbps, basic rate
-			pAd->CommonCfg.SupRate[3]  = 0x96;	  // 11 mbps, in units of 0.5 Mbps, basic rate
-			pAd->CommonCfg.SupRate[4]  = 0x12;	  // 9 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.SupRate[5]  = 0x24;	  // 18 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.SupRate[6]  = 0x48;	  // 36 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.SupRate[7]  = 0x6c;	  // 54 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.SupRateLen  = 8;
-			pAd->CommonCfg.ExtRate[0]  = 0x0C;	  // 6 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.ExtRate[1]  = 0x18;	  // 12 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.ExtRate[2]  = 0x30;	  // 24 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.ExtRate[3]  = 0x60;	  // 48 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.ExtRateLen  = 4;
-			pAd->CommonCfg.DesireRate[0]  = 2;	   // 1 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[1]  = 4;	   // 2 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[2]  = 11;    // 5.5 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[3]  = 22;    // 11 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[4]  = 12;    // 6 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[5]  = 18;    // 9 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[6]  = 24;    // 12 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[7]  = 36;    // 18 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[8]  = 48;    // 24 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[9]  = 72;    // 36 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[10] = 96;    // 48 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[11] = 108;   // 54 mbps, in units of 0.5 Mbps
-			break;
-
-		case PHY_11A:
-#ifdef DOT11_N_SUPPORT
-		case PHY_11AN_MIXED:
-		case PHY_11AGN_MIXED:
-		case PHY_11N_5G:
-#endif // DOT11_N_SUPPORT //
-			pAd->CommonCfg.SupRate[0]  = 0x8C;	  // 6 mbps, in units of 0.5 Mbps, basic rate
-			pAd->CommonCfg.SupRate[1]  = 0x12;	  // 9 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.SupRate[2]  = 0x98;	  // 12 mbps, in units of 0.5 Mbps, basic rate
-			pAd->CommonCfg.SupRate[3]  = 0x24;	  // 18 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.SupRate[4]  = 0xb0;	  // 24 mbps, in units of 0.5 Mbps, basic rate
-			pAd->CommonCfg.SupRate[5]  = 0x48;	  // 36 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.SupRate[6]  = 0x60;	  // 48 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.SupRate[7]  = 0x6c;	  // 54 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.SupRateLen  = 8;
-			pAd->CommonCfg.ExtRateLen  = 0;
-			pAd->CommonCfg.DesireRate[0]  = 12;    // 6 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[1]  = 18;    // 9 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[2]  = 24;    // 12 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[3]  = 36;    // 18 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[4]  = 48;    // 24 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[5]  = 72;    // 36 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[6]  = 96;    // 48 mbps, in units of 0.5 Mbps
-			pAd->CommonCfg.DesireRate[7]  = 108;   // 54 mbps, in units of 0.5 Mbps
-			//pAd->CommonCfg.HTPhyMode.field.MODE = MODE_OFDM; // This MODE is only FYI. not use
-			break;
-
-		default:
-			break;
-	}
-
-
-	pAd->CommonCfg.BandState = UNKNOWN_BAND;
-}
-
-
-#ifdef DOT11_N_SUPPORT
-/*
-	========================================================================
-	Routine Description:
-		Caller ensures we has 802.11n support.
-		Calls at setting HT from AP/STASetinformation
-
-	Arguments:
-		pAd - Pointer to our adapter
-		phymode  -
-
-	========================================================================
-*/
-VOID	RTMPSetHT(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	OID_SET_HT_PHYMODE *pHTPhyMode)
-{
-	//ULONG	*pmcs;
-	UINT32	Value = 0;
-	UCHAR	BBPValue = 0;
-	UCHAR	BBP3Value = 0;
-	UCHAR	RxStream = pAd->CommonCfg.RxStream;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetHT : HT_mode(%d), ExtOffset(%d), MCS(%d), BW(%d), STBC(%d), SHORTGI(%d)\n",
-										pHTPhyMode->HtMode, pHTPhyMode->ExtOffset,
-										pHTPhyMode->MCS, pHTPhyMode->BW,
-										pHTPhyMode->STBC, pHTPhyMode->SHORTGI));
-
-	// Don't zero supportedHyPhy structure.
-	RTMPZeroMemory(&pAd->CommonCfg.HtCapability, sizeof(pAd->CommonCfg.HtCapability));
-	RTMPZeroMemory(&pAd->CommonCfg.AddHTInfo, sizeof(pAd->CommonCfg.AddHTInfo));
-	RTMPZeroMemory(&pAd->CommonCfg.NewExtChanOffset, sizeof(pAd->CommonCfg.NewExtChanOffset));
-	RTMPZeroMemory(&pAd->CommonCfg.DesiredHtPhy, sizeof(pAd->CommonCfg.DesiredHtPhy));
-
-   	if (pAd->CommonCfg.bRdg)
-	{
-		pAd->CommonCfg.HtCapability.ExtHtCapInfo.PlusHTC = 1;
-		pAd->CommonCfg.HtCapability.ExtHtCapInfo.RDGSupport = 1;
-	}
-	else
-	{
-		pAd->CommonCfg.HtCapability.ExtHtCapInfo.PlusHTC = 0;
-		pAd->CommonCfg.HtCapability.ExtHtCapInfo.RDGSupport = 0;
-	}
-
-	pAd->CommonCfg.HtCapability.HtCapParm.MaxRAmpduFactor = 3;
-	pAd->CommonCfg.DesiredHtPhy.MaxRAmpduFactor = 3;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetHT : RxBAWinLimit = %d\n", pAd->CommonCfg.BACapability.field.RxBAWinLimit));
-
-	// Mimo power save, A-MSDU size,
-	pAd->CommonCfg.DesiredHtPhy.AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable;
-	pAd->CommonCfg.DesiredHtPhy.AmsduSize = (UCHAR)pAd->CommonCfg.BACapability.field.AmsduSize;
-	pAd->CommonCfg.DesiredHtPhy.MimoPs = (UCHAR)pAd->CommonCfg.BACapability.field.MMPSmode;
-	pAd->CommonCfg.DesiredHtPhy.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
-
-	pAd->CommonCfg.HtCapability.HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
-	pAd->CommonCfg.HtCapability.HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
-	pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetHT : AMsduSize = %d, MimoPs = %d, MpduDensity = %d, MaxRAmpduFactor = %d\n",
-													pAd->CommonCfg.DesiredHtPhy.AmsduSize,
-													pAd->CommonCfg.DesiredHtPhy.MimoPs,
-													pAd->CommonCfg.DesiredHtPhy.MpduDensity,
-													pAd->CommonCfg.DesiredHtPhy.MaxRAmpduFactor));
-
-	if(pHTPhyMode->HtMode == HTMODE_GF)
-	{
-		pAd->CommonCfg.HtCapability.HtCapInfo.GF = 1;
-		pAd->CommonCfg.DesiredHtPhy.GF = 1;
-	}
-	else
-		pAd->CommonCfg.DesiredHtPhy.GF = 0;
-
-	// Decide Rx MCSSet
-	switch (RxStream)
-	{
-		case 1:
-			pAd->CommonCfg.HtCapability.MCSSet[0] =  0xff;
-			pAd->CommonCfg.HtCapability.MCSSet[1] =  0x00;
-			break;
-
-		case 2:
-			pAd->CommonCfg.HtCapability.MCSSet[0] =  0xff;
-			pAd->CommonCfg.HtCapability.MCSSet[1] =  0xff;
-			break;
-
-		case 3: // 3*3
-			pAd->CommonCfg.HtCapability.MCSSet[0] =  0xff;
-			pAd->CommonCfg.HtCapability.MCSSet[1] =  0xff;
-			pAd->CommonCfg.HtCapability.MCSSet[2] =  0xff;
-			break;
-	}
-
-	if (pAd->CommonCfg.bForty_Mhz_Intolerant && (pAd->CommonCfg.Channel <= 14) && (pHTPhyMode->BW == BW_40) )
-	{
-		pHTPhyMode->BW = BW_20;
-		pAd->CommonCfg.HtCapability.HtCapInfo.Forty_Mhz_Intolerant = 1;
-	}
-
-	if(pHTPhyMode->BW == BW_40)
-	{
-		pAd->CommonCfg.HtCapability.MCSSet[4] = 0x1; // MCS 32
-		pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth = 1;
-		if (pAd->CommonCfg.Channel <= 14)
-			pAd->CommonCfg.HtCapability.HtCapInfo.CCKmodein40 = 1;
-
-		pAd->CommonCfg.DesiredHtPhy.ChannelWidth = 1;
-		pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth = 1;
-		pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset = (pHTPhyMode->ExtOffset == EXTCHA_BELOW)? (EXTCHA_BELOW): EXTCHA_ABOVE;
-		// Set Regsiter for extension channel position.
-		RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBP3Value);
-		if ((pHTPhyMode->ExtOffset == EXTCHA_BELOW))
-		{
-			Value |= 0x1;
-			BBP3Value |= (0x20);
-			RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
-		}
-		else if ((pHTPhyMode->ExtOffset == EXTCHA_ABOVE))
-		{
-			Value &= 0xfe;
-			BBP3Value &= (~0x20);
-			RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
-		}
-
-		// Turn on BBP 40MHz mode now only as AP .
-		// Sta can turn on BBP 40MHz after connection with 40MHz AP. Sta only broadcast 40MHz capability before connection.
-		if ((pAd->OpMode == OPMODE_AP) || INFRA_ON(pAd) || ADHOC_ON(pAd)
-			)
-		{
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
-			BBPValue &= (~0x18);
-			BBPValue |= 0x10;
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
-
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBP3Value);
-			pAd->CommonCfg.BBPCurrentBW = BW_40;
-		}
-	}
-	else
-	{
-		pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth = 0;
-		pAd->CommonCfg.DesiredHtPhy.ChannelWidth = 0;
-		pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth = 0;
-		pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset = EXTCHA_NONE;
-		pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel;
-		// Turn on BBP 20MHz mode by request here.
-		{
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
-			BBPValue &= (~0x18);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
-			pAd->CommonCfg.BBPCurrentBW = BW_20;
-		}
-	}
-
-	if(pHTPhyMode->STBC == STBC_USE)
-	{
-		pAd->CommonCfg.HtCapability.HtCapInfo.TxSTBC = 1;
-		pAd->CommonCfg.DesiredHtPhy.TxSTBC = 1;
-		pAd->CommonCfg.HtCapability.HtCapInfo.RxSTBC = 1;
-		pAd->CommonCfg.DesiredHtPhy.RxSTBC = 1;
-	}
-	else
-	{
-		pAd->CommonCfg.DesiredHtPhy.TxSTBC = 0;
-		pAd->CommonCfg.DesiredHtPhy.RxSTBC = 0;
-	}
-
-	if(pHTPhyMode->SHORTGI == GI_400)
-	{
-		pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor20 = 1;
-		pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor40 = 1;
-		pAd->CommonCfg.DesiredHtPhy.ShortGIfor20 = 1;
-		pAd->CommonCfg.DesiredHtPhy.ShortGIfor40 = 1;
-	}
-	else
-	{
-		pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor20 = 0;
-		pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor40 = 0;
-		pAd->CommonCfg.DesiredHtPhy.ShortGIfor20 = 0;
-		pAd->CommonCfg.DesiredHtPhy.ShortGIfor40 = 0;
-	}
-
-	// We support link adaptation for unsolicit MCS feedback, set to 2.
-	pAd->CommonCfg.HtCapability.ExtHtCapInfo.MCSFeedback = MCSFBK_NONE; //MCSFBK_UNSOLICIT;
-	pAd->CommonCfg.AddHTInfo.ControlChan = pAd->CommonCfg.Channel;
-	// 1, the extension channel above the control channel.
-
-	// EDCA parameters used for AP's own transmission
-	if (pAd->CommonCfg.APEdcaParm.bValid == FALSE)
-	{
-		pAd->CommonCfg.APEdcaParm.bValid = TRUE;
-		pAd->CommonCfg.APEdcaParm.Aifsn[0] = 3;
-		pAd->CommonCfg.APEdcaParm.Aifsn[1] = 7;
-		pAd->CommonCfg.APEdcaParm.Aifsn[2] = 1;
-		pAd->CommonCfg.APEdcaParm.Aifsn[3] = 1;
-
-		pAd->CommonCfg.APEdcaParm.Cwmin[0] = 4;
-		pAd->CommonCfg.APEdcaParm.Cwmin[1] = 4;
-		pAd->CommonCfg.APEdcaParm.Cwmin[2] = 3;
-		pAd->CommonCfg.APEdcaParm.Cwmin[3] = 2;
-
-		pAd->CommonCfg.APEdcaParm.Cwmax[0] = 6;
-		pAd->CommonCfg.APEdcaParm.Cwmax[1] = 10;
-		pAd->CommonCfg.APEdcaParm.Cwmax[2] = 4;
-		pAd->CommonCfg.APEdcaParm.Cwmax[3] = 3;
-
-		pAd->CommonCfg.APEdcaParm.Txop[0]  = 0;
-		pAd->CommonCfg.APEdcaParm.Txop[1]  = 0;
-		pAd->CommonCfg.APEdcaParm.Txop[2]  = 94;
-		pAd->CommonCfg.APEdcaParm.Txop[3]  = 47;
-	}
-	AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm);
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		RTMPSetIndividualHT(pAd, 0);
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-}
-
-/*
-	========================================================================
-	Routine Description:
-		Caller ensures we has 802.11n support.
-		Calls at setting HT from AP/STASetinformation
-
-	Arguments:
-		pAd - Pointer to our adapter
-		phymode  -
-
-	========================================================================
-*/
-VOID	RTMPSetIndividualHT(
-	IN	PRTMP_ADAPTER		pAd,
-	IN	UCHAR				apidx)
-{
-	PRT_HT_PHY_INFO		pDesired_ht_phy = NULL;
-	UCHAR	TxStream = pAd->CommonCfg.TxStream;
-	UCHAR	DesiredMcs	= MCS_AUTO;
-
-	do
-	{
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			pDesired_ht_phy = &pAd->StaCfg.DesiredHtPhyInfo;
-			DesiredMcs = pAd->StaCfg.DesiredTransmitSetting.field.MCS;
-			//pAd->StaCfg.bAutoTxRateSwitch = (DesiredMcs == MCS_AUTO) ? TRUE : FALSE;
-				break;
-		}
-#endif // CONFIG_STA_SUPPORT //
-	} while (FALSE);
-
-	if (pDesired_ht_phy == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("RTMPSetIndividualHT: invalid apidx(%d)\n", apidx));
-		return;
-	}
-	RTMPZeroMemory(pDesired_ht_phy, sizeof(RT_HT_PHY_INFO));
-
-	DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetIndividualHT : Desired MCS = %d\n", DesiredMcs));
-	// Check the validity of MCS
-	if ((TxStream == 1) && ((DesiredMcs >= MCS_8) && (DesiredMcs <= MCS_15)))
-	{
-		DBGPRINT(RT_DEBUG_WARN, ("RTMPSetIndividualHT: MCS(%d) is invalid in 1S, reset it as MCS_7\n", DesiredMcs));
-		DesiredMcs = MCS_7;
-	}
-
-	if ((pAd->CommonCfg.DesiredHtPhy.ChannelWidth == BW_20) && (DesiredMcs == MCS_32))
-	{
-		DBGPRINT(RT_DEBUG_WARN, ("RTMPSetIndividualHT: MCS_32 is only supported in 40-MHz, reset it as MCS_0\n"));
-		DesiredMcs = MCS_0;
-	}
-
-	pDesired_ht_phy->bHtEnable = TRUE;
-
-	// Decide desired Tx MCS
-	switch (TxStream)
-	{
-		case 1:
-			if (DesiredMcs == MCS_AUTO)
-			{
-				pDesired_ht_phy->MCSSet[0]= 0xff;
-				pDesired_ht_phy->MCSSet[1]= 0x00;
-			}
-			else if (DesiredMcs <= MCS_7)
-			{
-				pDesired_ht_phy->MCSSet[0]= 1<<DesiredMcs;
-				pDesired_ht_phy->MCSSet[1]= 0x00;
-			}
-			break;
-
-		case 2:
-			if (DesiredMcs == MCS_AUTO)
-			{
-				pDesired_ht_phy->MCSSet[0]= 0xff;
-				pDesired_ht_phy->MCSSet[1]= 0xff;
-			}
-			else if (DesiredMcs <= MCS_15)
-			{
-				ULONG mode;
-
-				mode = DesiredMcs / 8;
-				if (mode < 2)
-					pDesired_ht_phy->MCSSet[mode] = (1 << (DesiredMcs - mode * 8));
-			}
-			break;
-
-		case 3: // 3*3
-			if (DesiredMcs == MCS_AUTO)
-			{
-				/* MCS0 ~ MCS23, 3 bytes */
-				pDesired_ht_phy->MCSSet[0]= 0xff;
-				pDesired_ht_phy->MCSSet[1]= 0xff;
-				pDesired_ht_phy->MCSSet[2]= 0xff;
-			}
-			else if (DesiredMcs <= MCS_23)
-			{
-				ULONG mode;
-
-				mode = DesiredMcs / 8;
-				if (mode < 3)
-					pDesired_ht_phy->MCSSet[mode] = (1 << (DesiredMcs - mode * 8));
-			}
-			break;
-	}
-
-	if(pAd->CommonCfg.DesiredHtPhy.ChannelWidth == BW_40)
-	{
-		if (DesiredMcs == MCS_AUTO || DesiredMcs == MCS_32)
-			pDesired_ht_phy->MCSSet[4] = 0x1;
-	}
-
-	// update HT Rate setting
-    if (pAd->OpMode == OPMODE_STA)
-        MlmeUpdateHtTxRates(pAd, BSS0);
-    else
-	    MlmeUpdateHtTxRates(pAd, apidx);
-}
-
-
-/*
-	========================================================================
-	Routine Description:
-		Update HT IE from our capability.
-
-	Arguments:
-		Send all HT IE in beacon/probe rsp/assoc rsp/action frame.
-
-
-	========================================================================
-*/
-VOID	RTMPUpdateHTIE(
-	IN	RT_HT_CAPABILITY	*pRtHt,
-	IN		UCHAR				*pMcsSet,
-	OUT		HT_CAPABILITY_IE *pHtCapability,
-	OUT		ADD_HT_INFO_IE		*pAddHtInfo)
-{
-	RTMPZeroMemory(pHtCapability, sizeof(HT_CAPABILITY_IE));
-	RTMPZeroMemory(pAddHtInfo, sizeof(ADD_HT_INFO_IE));
-
-		pHtCapability->HtCapInfo.ChannelWidth = pRtHt->ChannelWidth;
-		pHtCapability->HtCapInfo.MimoPs = pRtHt->MimoPs;
-		pHtCapability->HtCapInfo.GF = pRtHt->GF;
-		pHtCapability->HtCapInfo.ShortGIfor20 = pRtHt->ShortGIfor20;
-		pHtCapability->HtCapInfo.ShortGIfor40 = pRtHt->ShortGIfor40;
-		pHtCapability->HtCapInfo.TxSTBC = pRtHt->TxSTBC;
-		pHtCapability->HtCapInfo.RxSTBC = pRtHt->RxSTBC;
-		pHtCapability->HtCapInfo.AMsduSize = pRtHt->AmsduSize;
-		pHtCapability->HtCapParm.MaxRAmpduFactor = pRtHt->MaxRAmpduFactor;
-		pHtCapability->HtCapParm.MpduDensity = pRtHt->MpduDensity;
-
-		pAddHtInfo->AddHtInfo.ExtChanOffset = pRtHt->ExtChanOffset ;
-		pAddHtInfo->AddHtInfo.RecomWidth = pRtHt->RecomWidth;
-		pAddHtInfo->AddHtInfo2.OperaionMode = pRtHt->OperaionMode;
-		pAddHtInfo->AddHtInfo2.NonGfPresent = pRtHt->NonGfPresent;
-		RTMPMoveMemory(pAddHtInfo->MCSSet, /*pRtHt->MCSSet*/pMcsSet, 4); // rt2860 only support MCS max=32, no need to copy all 16 uchar.
-
-        DBGPRINT(RT_DEBUG_TRACE,("RTMPUpdateHTIE <== \n"));
-}
-#endif // DOT11_N_SUPPORT //
-
-/*
-	========================================================================
-	Description:
-		Add Client security information into ASIC WCID table and IVEIV table.
-    Return:
-	========================================================================
-*/
-VOID	RTMPAddWcidAttributeEntry(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			BssIdx,
-	IN 	UCHAR		 	KeyIdx,
-	IN 	UCHAR		 	CipherAlg,
-	IN 	MAC_TABLE_ENTRY *pEntry)
-{
-	UINT32		WCIDAttri = 0;
-	USHORT		offset;
-	UCHAR		IVEIV = 0;
-	USHORT		Wcid = 0;
-
-	{
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			if (BssIdx > BSS0)
-			{
-				DBGPRINT(RT_DEBUG_ERROR, ("RTMPAddWcidAttributeEntry: The BSS-index(%d) is out of range for Infra link. \n", BssIdx));
-				return;
-			}
-
-			// 1.	In ADHOC mode, the AID is wcid number. And NO mesh link exists.
-			// 2.	In Infra mode, the AID:1 MUST be wcid of infra STA.
-			//					   the AID:2~ assign to mesh link entry.
-			if (pEntry && ADHOC_ON(pAd))
-				Wcid = pEntry->Aid;
-			else if (pEntry && INFRA_ON(pAd))
-			{
-#ifdef QOS_DLS_SUPPORT
-				if (pEntry->ValidAsDls == TRUE)
-					Wcid = pEntry->Aid;
-				else
-#endif // QOS_DLS_SUPPORT //
-				Wcid = BSSID_WCID;
-			}
-			else
-				Wcid = MCAST_WCID;
-		}
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-	// Update WCID attribute table
-	offset = MAC_WCID_ATTRIBUTE_BASE + (Wcid * HW_WCID_ATTRI_SIZE);
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if (pEntry && pEntry->ValidAsMesh)
-			WCIDAttri = (CipherAlg<<1) | PAIRWISEKEYTABLE;
-#ifdef QOS_DLS_SUPPORT
-		else if ((pEntry) && (pEntry->ValidAsDls) &&
-					((CipherAlg == CIPHER_TKIP) ||
-				 	(CipherAlg == CIPHER_TKIP_NO_MIC) ||
-					(CipherAlg == CIPHER_AES) ||
-				 	(CipherAlg == CIPHER_NONE)))
-			WCIDAttri = (CipherAlg<<1) | PAIRWISEKEYTABLE;
-#endif // QOS_DLS_SUPPORT //
-		else
-			WCIDAttri = (CipherAlg<<1) | SHAREDKEYTABLE;
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	RTMP_IO_WRITE32(pAd, offset, WCIDAttri);
-
-
-	// Update IV/EIV table
-	offset = MAC_IVEIV_TABLE_BASE + (Wcid * HW_IVEIV_ENTRY_SIZE);
-
-	// WPA mode
-	if ((CipherAlg == CIPHER_TKIP) || (CipherAlg == CIPHER_TKIP_NO_MIC) || (CipherAlg == CIPHER_AES))
-	{
-		// Eiv bit on. keyid always is 0 for pairwise key
-		IVEIV = (KeyIdx <<6) | 0x20;
-	}
-	else
-	{
-		// WEP KeyIdx is default tx key.
-		IVEIV = (KeyIdx << 6);
-	}
-
-	// For key index and ext IV bit, so only need to update the position(offset+3).
-#ifdef RT2870
-	RTUSBMultiWrite_OneByte(pAd, offset+3, &IVEIV);
-#endif // RT2870 //
-
-	DBGPRINT(RT_DEBUG_TRACE,("RTMPAddWcidAttributeEntry: WCID #%d, KeyIndex #%d, Alg=%s\n",Wcid, KeyIdx, CipherName[CipherAlg]));
-	DBGPRINT(RT_DEBUG_TRACE,("	WCIDAttri = 0x%x \n",  WCIDAttri));
-
-}
-
-/*
-    ==========================================================================
-    Description:
-        Parse encryption type
-Arguments:
-    pAdapter                    Pointer to our adapter
-    wrq                         Pointer to the ioctl argument
-
-    Return Value:
-        None
-
-    Note:
-    ==========================================================================
-*/
-CHAR *GetEncryptType(CHAR enc)
-{
-    if(enc == Ndis802_11WEPDisabled)
-        return "NONE";
-    if(enc == Ndis802_11WEPEnabled)
-    	return "WEP";
-    if(enc == Ndis802_11Encryption2Enabled)
-    	return "TKIP";
-    if(enc == Ndis802_11Encryption3Enabled)
-    	return "AES";
-	if(enc == Ndis802_11Encryption4Enabled)
-    	return "TKIPAES";
-    else
-    	return "UNKNOW";
-}
-
-CHAR *GetAuthMode(CHAR auth)
-{
-    if(auth == Ndis802_11AuthModeOpen)
-    	return "OPEN";
-    if(auth == Ndis802_11AuthModeShared)
-    	return "SHARED";
-	if(auth == Ndis802_11AuthModeAutoSwitch)
-    	return "AUTOWEP";
-    if(auth == Ndis802_11AuthModeWPA)
-    	return "WPA";
-    if(auth == Ndis802_11AuthModeWPAPSK)
-    	return "WPAPSK";
-    if(auth == Ndis802_11AuthModeWPANone)
-    	return "WPANONE";
-    if(auth == Ndis802_11AuthModeWPA2)
-    	return "WPA2";
-    if(auth == Ndis802_11AuthModeWPA2PSK)
-    	return "WPA2PSK";
-	if(auth == Ndis802_11AuthModeWPA1WPA2)
-    	return "WPA1WPA2";
-	if(auth == Ndis802_11AuthModeWPA1PSKWPA2PSK)
-    	return "WPA1PSKWPA2PSK";
-
-    	return "UNKNOW";
-}
-
-#if 1 //#ifndef UCOS
-/*
-    ==========================================================================
-    Description:
-        Get site survey results
-	Arguments:
-	    pAdapter                    Pointer to our adapter
-	    wrq                         Pointer to the ioctl argument
-
-    Return Value:
-        None
-
-    Note:
-        Usage:
-        		1.) UI needs to wait 4 seconds after issue a site survey command
-        		2.) iwpriv ra0 get_site_survey
-        		3.) UI needs to prepare at least 4096bytes to get the results
-    ==========================================================================
-*/
-#define	LINE_LEN	(4+33+20+8+10+9+7+3)	// Channel+SSID+Bssid+WepStatus+AuthMode+Signal+WiressMode+NetworkType
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-VOID RTMPIoctlGetSiteSurvey(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq)
-{
-	CHAR		*msg;
-	INT 		i=0;
-	INT			WaitCnt;
-	INT 		Status=0;
-	CHAR		Ssid[MAX_LEN_OF_SSID +1];
-    INT         Rssi = 0, max_len = LINE_LEN;
-	UINT        Rssi_Quality = 0;
-	NDIS_802_11_NETWORK_TYPE    wireless_mode;
-
-	os_alloc_mem(NULL, (PUCHAR *)&msg, sizeof(CHAR)*((MAX_LEN_OF_BSS_TABLE)*max_len));
-
-	if (msg == NULL)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("RTMPIoctlGetSiteSurvey - msg memory alloc fail.\n"));
-		return;
-	}
-
-	memset(msg, 0 ,(MAX_LEN_OF_BSS_TABLE)*max_len );
-	memset(Ssid, 0 ,(MAX_LEN_OF_SSID +1));
-	sprintf(msg,"%s","\n");
-	sprintf(msg+strlen(msg),"%-4s%-33s%-20s%-8s%-10s%-9s%-7s%-3s\n",
-	    "Ch", "SSID", "BSSID", "Enc", "Auth", "Siganl(%)", "W-Mode", " NT");
-
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-
-	WaitCnt = 0;
-#ifdef CONFIG_STA_SUPPORT
-	pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE;
-	while ((ScanRunning(pAdapter) == TRUE) && (WaitCnt++ < 200))
-		OS_WAIT(500);
-#endif // CONFIG_STA_SUPPORT //
-
-	for(i=0; i<pAdapter->ScanTab.BssNr ;i++)
-	{
-		if( pAdapter->ScanTab.BssEntry[i].Channel==0)
-			break;
-
-		if((strlen(msg)+max_len ) >= IW_SCAN_MAX_DATA)
-			break;
-
-		//Channel
-		sprintf(msg+strlen(msg),"%-4d", pAdapter->ScanTab.BssEntry[i].Channel);
-		//SSID
-		memcpy(Ssid, pAdapter->ScanTab.BssEntry[i].Ssid, pAdapter->ScanTab.BssEntry[i].SsidLen);
-		Ssid[pAdapter->ScanTab.BssEntry[i].SsidLen] = '\0';
-		sprintf(msg+strlen(msg),"%-33s", Ssid);
-		//BSSID
-		sprintf(msg+strlen(msg),"%02x:%02x:%02x:%02x:%02x:%02x   ",
-			pAdapter->ScanTab.BssEntry[i].Bssid[0],
-			pAdapter->ScanTab.BssEntry[i].Bssid[1],
-			pAdapter->ScanTab.BssEntry[i].Bssid[2],
-			pAdapter->ScanTab.BssEntry[i].Bssid[3],
-			pAdapter->ScanTab.BssEntry[i].Bssid[4],
-			pAdapter->ScanTab.BssEntry[i].Bssid[5]);
-		//Encryption Type
-		sprintf(msg+strlen(msg),"%-8s",GetEncryptType(pAdapter->ScanTab.BssEntry[i].WepStatus));
-		//Authentication Mode
-		if (pAdapter->ScanTab.BssEntry[i].WepStatus == Ndis802_11WEPEnabled)
-			sprintf(msg+strlen(msg),"%-10s", "UNKNOW");
-		else
-			sprintf(msg+strlen(msg),"%-10s",GetAuthMode(pAdapter->ScanTab.BssEntry[i].AuthMode));
-		// Rssi
-		Rssi = (INT)pAdapter->ScanTab.BssEntry[i].Rssi;
-		if (Rssi >= -50)
-			Rssi_Quality = 100;
-		else if (Rssi >= -80)    // between -50 ~ -80dbm
-			Rssi_Quality = (UINT)(24 + ((Rssi + 80) * 26)/10);
-		else if (Rssi >= -90)   // between -80 ~ -90dbm
-			Rssi_Quality = (UINT)(((Rssi + 90) * 26)/10);
-		else    // < -84 dbm
-			Rssi_Quality = 0;
-		sprintf(msg+strlen(msg),"%-9d", Rssi_Quality);
-		// Wireless Mode
-		wireless_mode = NetworkTypeInUseSanity(&pAdapter->ScanTab.BssEntry[i]);
-		if (wireless_mode == Ndis802_11FH ||
-			wireless_mode == Ndis802_11DS)
-			sprintf(msg+strlen(msg),"%-7s", "11b");
-		else if (wireless_mode == Ndis802_11OFDM5)
-			sprintf(msg+strlen(msg),"%-7s", "11a");
-		else if (wireless_mode == Ndis802_11OFDM5_N)
-			sprintf(msg+strlen(msg),"%-7s", "11a/n");
-		else if (wireless_mode == Ndis802_11OFDM24)
-			sprintf(msg+strlen(msg),"%-7s", "11b/g");
-		else if (wireless_mode == Ndis802_11OFDM24_N)
-			sprintf(msg+strlen(msg),"%-7s", "11b/g/n");
-		else
-			sprintf(msg+strlen(msg),"%-7s", "unknow");
-		//Network Type
-		if (pAdapter->ScanTab.BssEntry[i].BssType == BSS_ADHOC)
-			sprintf(msg+strlen(msg),"%-3s", " Ad");
-		else
-			sprintf(msg+strlen(msg),"%-3s", " In");
-
-        sprintf(msg+strlen(msg),"\n");
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-#ifdef CONFIG_STA_SUPPORT
-	pAdapter->StaCfg.bScanReqIsFromWebUI = FALSE;
-#endif // CONFIG_STA_SUPPORT //
-	wrq->u.data.length = strlen(msg);
-	Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("RTMPIoctlGetSiteSurvey - wrq->u.data.length = %d\n", wrq->u.data.length));
-	os_free_mem(NULL, (PUCHAR)msg);
-}
-
-
-#define	MAC_LINE_LEN	(14+4+4+10+10+10+6+6)	// Addr+aid+psm+datatime+rxbyte+txbyte+current tx rate+last tx rate
-VOID RTMPIoctlGetMacTable(
-	IN PRTMP_ADAPTER pAd,
-	IN struct iwreq *wrq)
-{
-	INT i;
-	RT_802_11_MAC_TABLE MacTab;
-	char *msg;
-
-	MacTab.Num = 0;
-	for (i=0; i<MAX_LEN_OF_MAC_TABLE; i++)
-	{
-		if (pAd->MacTab.Content[i].ValidAsCLI && (pAd->MacTab.Content[i].Sst == SST_ASSOC))
-		{
-			COPY_MAC_ADDR(MacTab.Entry[MacTab.Num].Addr, &pAd->MacTab.Content[i].Addr);
-			MacTab.Entry[MacTab.Num].Aid = (UCHAR)pAd->MacTab.Content[i].Aid;
-			MacTab.Entry[MacTab.Num].Psm = pAd->MacTab.Content[i].PsMode;
-#ifdef DOT11_N_SUPPORT
-			MacTab.Entry[MacTab.Num].MimoPs = pAd->MacTab.Content[i].MmpsMode;
-#endif // DOT11_N_SUPPORT //
-
-			// Fill in RSSI per entry
-			MacTab.Entry[MacTab.Num].AvgRssi0 = pAd->MacTab.Content[i].RssiSample.AvgRssi0;
-			MacTab.Entry[MacTab.Num].AvgRssi1 = pAd->MacTab.Content[i].RssiSample.AvgRssi1;
-			MacTab.Entry[MacTab.Num].AvgRssi2 = pAd->MacTab.Content[i].RssiSample.AvgRssi2;
-
-			// the connected time per entry
-			MacTab.Entry[MacTab.Num].ConnectedTime = pAd->MacTab.Content[i].StaConnectTime;
-			MacTab.Entry[MacTab.Num].TxRate.field.MCS = pAd->MacTab.Content[i].HTPhyMode.field.MCS;
-			MacTab.Entry[MacTab.Num].TxRate.field.BW = pAd->MacTab.Content[i].HTPhyMode.field.BW;
-			MacTab.Entry[MacTab.Num].TxRate.field.ShortGI = pAd->MacTab.Content[i].HTPhyMode.field.ShortGI;
-			MacTab.Entry[MacTab.Num].TxRate.field.STBC = pAd->MacTab.Content[i].HTPhyMode.field.STBC;
-			MacTab.Entry[MacTab.Num].TxRate.field.rsv = pAd->MacTab.Content[i].HTPhyMode.field.rsv;
-			MacTab.Entry[MacTab.Num].TxRate.field.MODE = pAd->MacTab.Content[i].HTPhyMode.field.MODE;
-			MacTab.Entry[MacTab.Num].TxRate.word = pAd->MacTab.Content[i].HTPhyMode.word;
-
-			MacTab.Num += 1;
-		}
-	}
-	wrq->u.data.length = sizeof(RT_802_11_MAC_TABLE);
-	if (copy_to_user(wrq->u.data.pointer, &MacTab, wrq->u.data.length))
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("%s: copy_to_user() fail\n", __FUNCTION__));
-	}
-
-	msg = (CHAR *) kmalloc(sizeof(CHAR)*(MAX_LEN_OF_MAC_TABLE*MAC_LINE_LEN), MEM_ALLOC_FLAG);
-	memset(msg, 0 ,MAX_LEN_OF_MAC_TABLE*MAC_LINE_LEN );
-	sprintf(msg,"%s","\n");
-	sprintf(msg+strlen(msg),"%-14s%-4s%-4s%-10s%-10s%-10s%-6s%-6s\n",
-		"MAC", "AID", "PSM", "LDT", "RxB", "TxB","CTxR", "LTxR");
-
-	for (i=0; i<MAX_LEN_OF_MAC_TABLE; i++)
-	{
-		PMAC_TABLE_ENTRY pEntry = &pAd->MacTab.Content[i];
-		if (pEntry->ValidAsCLI && (pEntry->Sst == SST_ASSOC))
-		{
-			if((strlen(msg)+MAC_LINE_LEN ) >= (MAX_LEN_OF_MAC_TABLE*MAC_LINE_LEN) )
-				break;
-			sprintf(msg+strlen(msg),"%02x%02x%02x%02x%02x%02x  ",
-				pEntry->Addr[0], pEntry->Addr[1], pEntry->Addr[2],
-				pEntry->Addr[3], pEntry->Addr[4], pEntry->Addr[5]);
-			sprintf(msg+strlen(msg),"%-4d", (int)pEntry->Aid);
-			sprintf(msg+strlen(msg),"%-4d", (int)pEntry->PsMode);
-			sprintf(msg+strlen(msg),"%-10d",0/*pAd->MacTab.Content[i].HSCounter.LastDataPacketTime*/); // ToDo
-			sprintf(msg+strlen(msg),"%-10d",0/*pAd->MacTab.Content[i].HSCounter.TotalRxByteCount*/); // ToDo
-			sprintf(msg+strlen(msg),"%-10d",0/*pAd->MacTab.Content[i].HSCounter.TotalTxByteCount*/); // ToDo
-			sprintf(msg+strlen(msg),"%-6d",RateIdToMbps[pAd->MacTab.Content[i].CurrTxRate]);
-			sprintf(msg+strlen(msg),"%-6d\n",0/*RateIdToMbps[pAd->MacTab.Content[i].LastTxRate]*/); // ToDo
-		}
-	}
-	// for compatible with old API just do the printk to console
-	//wrq->u.data.length = strlen(msg);
-	//if (copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length))
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("%s", msg));
-	}
-
-	kfree(msg);
-}
-#endif // UCOS //
-
-#ifdef DOT11_N_SUPPORT
-INT	Set_BASetup_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-    UCHAR mac[6], tid;
-	char *token, sepValue[] = ":", DASH = '-';
-	INT i;
-    MAC_TABLE_ENTRY *pEntry;
-
-/*
-	The BASetup inupt string format should be xx:xx:xx:xx:xx:xx-d,
-		=>The six 2 digit hex-decimal number previous are the Mac address,
-		=>The seventh decimal number is the tid value.
-*/
-	//printk("\n%s\n", arg);
-
-	if(strlen(arg) < 19)  //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and tid value in decimal format.
-		return FALSE;
-
-	token = strchr(arg, DASH);
-	if ((token != NULL) && (strlen(token)>1))
-	{
-		tid = simple_strtol((token+1), 0, 10);
-		if (tid > 15)
-			return FALSE;
-
-		*token = '\0';
-		for (i = 0, token = rstrtok(arg, &sepValue[0]); token; token = rstrtok(NULL, &sepValue[0]), i++)
-		{
-			if((strlen(token) != 2) || (!isxdigit(*token)) || (!isxdigit(*(token+1))))
-				return FALSE;
-			AtoH(token, (PUCHAR)(&mac[i]), 1);
-		}
-		if(i != 6)
-			return FALSE;
-
-		printk("\n%02x:%02x:%02x:%02x:%02x:%02x-%02x\n", mac[0], mac[1],
-				mac[2], mac[3], mac[4], mac[5], tid);
-
-	    pEntry = MacTableLookup(pAd, mac);
-
-    	if (pEntry) {
-        	printk("\nSetup BA Session: Tid = %d\n", tid);
-	        BAOriSessionSetUp(pAd, pEntry, tid, 0, 100, TRUE);
-    	}
-
-		return TRUE;
-	}
-
-	return FALSE;
-
-}
-
-INT	Set_BADecline_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG bBADecline;
-
-	bBADecline = simple_strtol(arg, 0, 10);
-
-	if (bBADecline == 0)
-	{
-		pAd->CommonCfg.bBADecline = FALSE;
-	}
-	else if (bBADecline == 1)
-	{
-		pAd->CommonCfg.bBADecline = TRUE;
-	}
-	else
-	{
-		return FALSE; //Invalid argument
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_BADecline_Proc::(BADecline=%d)\n", pAd->CommonCfg.bBADecline));
-
-	return TRUE;
-}
-
-INT	Set_BAOriTearDown_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-    UCHAR mac[6], tid;
-	char *token, sepValue[] = ":", DASH = '-';
-	INT i;
-    MAC_TABLE_ENTRY *pEntry;
-
-    //printk("\n%s\n", arg);
-/*
-	The BAOriTearDown inupt string format should be xx:xx:xx:xx:xx:xx-d,
-		=>The six 2 digit hex-decimal number previous are the Mac address,
-		=>The seventh decimal number is the tid value.
-*/
-    if(strlen(arg) < 19)  //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and tid value in decimal format.
-		return FALSE;
-
-	token = strchr(arg, DASH);
-	if ((token != NULL) && (strlen(token)>1))
-	{
-		tid = simple_strtol((token+1), 0, 10);
-		if (tid > NUM_OF_TID)
-			return FALSE;
-
-		*token = '\0';
-		for (i = 0, token = rstrtok(arg, &sepValue[0]); token; token = rstrtok(NULL, &sepValue[0]), i++)
-		{
-			if((strlen(token) != 2) || (!isxdigit(*token)) || (!isxdigit(*(token+1))))
-				return FALSE;
-			AtoH(token, (PUCHAR)(&mac[i]), 1);
-		}
-		if(i != 6)
-			return FALSE;
-
-	    printk("\n%02x:%02x:%02x:%02x:%02x:%02x-%02x", mac[0], mac[1],
-	           mac[2], mac[3], mac[4], mac[5], tid);
-
-	    pEntry = MacTableLookup(pAd, mac);
-
-	    if (pEntry) {
-	        printk("\nTear down Ori BA Session: Tid = %d\n", tid);
-        BAOriSessionTearDown(pAd, pEntry->Aid, tid, FALSE, TRUE);
-	    }
-
-		return TRUE;
-	}
-
-	return FALSE;
-
-}
-
-INT	Set_BARecTearDown_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-    UCHAR mac[6], tid;
-	char *token, sepValue[] = ":", DASH = '-';
-	INT i;
-    MAC_TABLE_ENTRY *pEntry;
-
-    //printk("\n%s\n", arg);
-/*
-	The BARecTearDown inupt string format should be xx:xx:xx:xx:xx:xx-d,
-		=>The six 2 digit hex-decimal number previous are the Mac address,
-		=>The seventh decimal number is the tid value.
-*/
-    if(strlen(arg) < 19)  //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and tid value in decimal format.
-		return FALSE;
-
-	token = strchr(arg, DASH);
-	if ((token != NULL) && (strlen(token)>1))
-	{
-		tid = simple_strtol((token+1), 0, 10);
-		if (tid > NUM_OF_TID)
-			return FALSE;
-
-		*token = '\0';
-		for (i = 0, token = rstrtok(arg, &sepValue[0]); token; token = rstrtok(NULL, &sepValue[0]), i++)
-		{
-			if((strlen(token) != 2) || (!isxdigit(*token)) || (!isxdigit(*(token+1))))
-				return FALSE;
-			AtoH(token, (PUCHAR)(&mac[i]), 1);
-		}
-		if(i != 6)
-			return FALSE;
-
-		printk("\n%02x:%02x:%02x:%02x:%02x:%02x-%02x", mac[0], mac[1],
-		       mac[2], mac[3], mac[4], mac[5], tid);
-
-		pEntry = MacTableLookup(pAd, mac);
-
-		if (pEntry) {
-		    printk("\nTear down Rec BA Session: Tid = %d\n", tid);
-		    BARecSessionTearDown(pAd, pEntry->Aid, tid, FALSE);
-		}
-
-		return TRUE;
-	}
-
-	return FALSE;
-
-}
-
-INT	Set_HtBw_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG HtBw;
-
-	HtBw = simple_strtol(arg, 0, 10);
-	if (HtBw == BW_40)
-		pAd->CommonCfg.RegTransmitSetting.field.BW  = BW_40;
-	else if (HtBw == BW_20)
-		pAd->CommonCfg.RegTransmitSetting.field.BW  = BW_20;
-	else
-		return FALSE;  //Invalid argument
-
-	SetCommonHT(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtBw_Proc::(HtBw=%d)\n", pAd->CommonCfg.RegTransmitSetting.field.BW));
-
-	return TRUE;
-}
-
-INT	Set_HtMcs_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG HtMcs, Mcs_tmp;
-#ifdef CONFIG_STA_SUPPORT
-    BOOLEAN bAutoRate = FALSE;
-#endif // CONFIG_STA_SUPPORT //
-
-	Mcs_tmp = simple_strtol(arg, 0, 10);
-
-	if (Mcs_tmp <= 15 || Mcs_tmp == 32)
-		HtMcs = Mcs_tmp;
-	else
-		HtMcs = MCS_AUTO;
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		pAd->StaCfg.DesiredTransmitSetting.field.MCS = HtMcs;
-		pAd->StaCfg.bAutoTxRateSwitch = (HtMcs == MCS_AUTO) ? TRUE:FALSE;
-		DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMcs_Proc::(HtMcs=%d, bAutoTxRateSwitch = %d)\n",
-						pAd->StaCfg.DesiredTransmitSetting.field.MCS, pAd->StaCfg.bAutoTxRateSwitch));
-
-		if ((pAd->CommonCfg.PhyMode < PHY_11ABGN_MIXED) ||
-			(pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE < MODE_HTMIX))
-		{
-	        if ((pAd->StaCfg.DesiredTransmitSetting.field.MCS != MCS_AUTO) &&
-				(HtMcs >= 0 && HtMcs <= 3) &&
-	            (pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode == FIXED_TXMODE_CCK))
-			{
-				RTMPSetDesiredRates(pAd, (LONG) (RateIdToMbps[HtMcs] * 1000000));
-			}
-	        else if ((pAd->StaCfg.DesiredTransmitSetting.field.MCS != MCS_AUTO) &&
-					(HtMcs >= 0 && HtMcs <= 7) &&
-	            	(pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode == FIXED_TXMODE_OFDM))
-			{
-				RTMPSetDesiredRates(pAd, (LONG) (RateIdToMbps[HtMcs+4] * 1000000));
-			}
-			else
-				bAutoRate = TRUE;
-
-			if (bAutoRate)
-			{
-	            pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
-				RTMPSetDesiredRates(pAd, -1);
-			}
-	        DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMcs_Proc::(FixedTxMode=%d)\n",pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode));
-		}
-        if (ADHOC_ON(pAd))
-            return TRUE;
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	SetCommonHT(pAd);
-
-	return TRUE;
-}
-
-INT	Set_HtGi_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG HtGi;
-
-	HtGi = simple_strtol(arg, 0, 10);
-
-	if ( HtGi == GI_400)
-		pAd->CommonCfg.RegTransmitSetting.field.ShortGI = GI_400;
-	else if ( HtGi == GI_800 )
-		pAd->CommonCfg.RegTransmitSetting.field.ShortGI = GI_800;
-	else
-		return FALSE; //Invalid argument
-
-	SetCommonHT(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtGi_Proc::(ShortGI=%d)\n",pAd->CommonCfg.RegTransmitSetting.field.ShortGI));
-
-	return TRUE;
-}
-
-
-INT	Set_HtTxBASize_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UCHAR Size;
-
-	Size = simple_strtol(arg, 0, 10);
-
-	if (Size <=0 || Size >=64)
-	{
-		Size = 8;
-	}
-	pAd->CommonCfg.TxBASize = Size-1;
-	DBGPRINT(RT_DEBUG_ERROR, ("Set_HtTxBASize ::(TxBASize= %d)\n", Size));
-
-	return TRUE;
-}
-
-
-INT	Set_HtOpMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-
-	if (Value == HTMODE_GF)
-		pAd->CommonCfg.RegTransmitSetting.field.HTMODE  = HTMODE_GF;
-	else if ( Value == HTMODE_MM )
-		pAd->CommonCfg.RegTransmitSetting.field.HTMODE  = HTMODE_MM;
-	else
-		return FALSE; //Invalid argument
-
-	SetCommonHT(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtOpMode_Proc::(HtOpMode=%d)\n",pAd->CommonCfg.RegTransmitSetting.field.HTMODE));
-
-	return TRUE;
-
-}
-
-INT	Set_HtStbc_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-
-	if (Value == STBC_USE)
-		pAd->CommonCfg.RegTransmitSetting.field.STBC = STBC_USE;
-	else if ( Value == STBC_NONE )
-		pAd->CommonCfg.RegTransmitSetting.field.STBC = STBC_NONE;
-	else
-		return FALSE; //Invalid argument
-
-	SetCommonHT(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_Stbc_Proc::(HtStbc=%d)\n",pAd->CommonCfg.RegTransmitSetting.field.STBC));
-
-	return TRUE;
-}
-
-INT	Set_HtHtc_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-	if (Value == 0)
-		pAd->HTCEnable = FALSE;
-	else if ( Value ==1 )
-        	pAd->HTCEnable = TRUE;
-	else
-		return FALSE; //Invalid argument
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtHtc_Proc::(HtHtc=%d)\n",pAd->HTCEnable));
-
-	return TRUE;
-}
-
-INT	Set_HtExtcha_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-
-	if (Value == 0)
-		pAd->CommonCfg.RegTransmitSetting.field.EXTCHA  = EXTCHA_BELOW;
-	else if ( Value ==1 )
-        pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_ABOVE;
-	else
-		return FALSE; //Invalid argument
-
-	SetCommonHT(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtExtcha_Proc::(HtExtcha=%d)\n",pAd->CommonCfg.RegTransmitSetting.field.EXTCHA));
-
-	return TRUE;
-}
-
-INT	Set_HtMpduDensity_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-
-	if (Value <=7 && Value >= 0)
-		pAd->CommonCfg.BACapability.field.MpduDensity = Value;
-	else
-		pAd->CommonCfg.BACapability.field.MpduDensity = 4;
-
-	SetCommonHT(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMpduDensity_Proc::(HtMpduDensity=%d)\n",pAd->CommonCfg.BACapability.field.MpduDensity));
-
-	return TRUE;
-}
-
-INT	Set_HtBaWinSize_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-
-
-	if (Value >=1 && Value <= 64)
-	{
-		pAd->CommonCfg.REGBACapability.field.RxBAWinLimit = Value;
-		pAd->CommonCfg.BACapability.field.RxBAWinLimit = Value;
-	}
-	else
-	{
-        pAd->CommonCfg.REGBACapability.field.RxBAWinLimit = 64;
-		pAd->CommonCfg.BACapability.field.RxBAWinLimit = 64;
-	}
-
-	SetCommonHT(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtBaWinSize_Proc::(HtBaWinSize=%d)\n",pAd->CommonCfg.BACapability.field.RxBAWinLimit));
-
-	return TRUE;
-}
-
-INT	Set_HtRdg_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-
-	if (Value == 0)
-		pAd->CommonCfg.bRdg = FALSE;
-	else if ( Value ==1 )
-	{
-		pAd->HTCEnable = TRUE;
-        	pAd->CommonCfg.bRdg = TRUE;
-	}
-	else
-		return FALSE; //Invalid argument
-
-	SetCommonHT(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtRdg_Proc::(HtRdg=%d)\n",pAd->CommonCfg.bRdg));
-
-	return TRUE;
-}
-
-INT	Set_HtLinkAdapt_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-	if (Value == 0)
-		pAd->bLinkAdapt = FALSE;
-	else if ( Value ==1 )
-	{
-			pAd->HTCEnable = TRUE;
-			pAd->bLinkAdapt = TRUE;
-	}
-	else
-		return FALSE; //Invalid argument
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtLinkAdapt_Proc::(HtLinkAdapt=%d)\n",pAd->bLinkAdapt));
-
-	return TRUE;
-}
-
-INT	Set_HtAmsdu_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-	if (Value == 0)
-		pAd->CommonCfg.BACapability.field.AmsduEnable = FALSE;
-	else if ( Value == 1 )
-        pAd->CommonCfg.BACapability.field.AmsduEnable = TRUE;
-	else
-		return FALSE; //Invalid argument
-
-	SetCommonHT(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtAmsdu_Proc::(HtAmsdu=%d)\n",pAd->CommonCfg.BACapability.field.AmsduEnable));
-
-	return TRUE;
-}
-
-INT	Set_HtAutoBa_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-	if (Value == 0)
-	{
-		pAd->CommonCfg.BACapability.field.AutoBA = FALSE;
-		pAd->CommonCfg.BACapability.field.Policy = BA_NOTUSE;
-	}
-        else if (Value == 1)
-	{
-		pAd->CommonCfg.BACapability.field.AutoBA = TRUE;
-		pAd->CommonCfg.BACapability.field.Policy = IMMED_BA;
-	}
-	else
-		return FALSE; //Invalid argument
-
-    pAd->CommonCfg.REGBACapability.field.AutoBA = pAd->CommonCfg.BACapability.field.AutoBA;
-    pAd->CommonCfg.REGBACapability.field.Policy = pAd->CommonCfg.BACapability.field.Policy;
-	SetCommonHT(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtAutoBa_Proc::(HtAutoBa=%d)\n",pAd->CommonCfg.BACapability.field.AutoBA));
-
-	return TRUE;
-
-}
-
-INT	Set_HtProtect_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-	if (Value == 0)
-		pAd->CommonCfg.bHTProtect = FALSE;
-    else if (Value == 1)
-		pAd->CommonCfg.bHTProtect = TRUE;
-	else
-		return FALSE; //Invalid argument
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtProtect_Proc::(HtProtect=%d)\n",pAd->CommonCfg.bHTProtect));
-
-	return TRUE;
-}
-
-INT	Set_SendPSMPAction_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-    UCHAR mac[6], mode;
-	char *token, sepValue[] = ":", DASH = '-';
-	INT i;
-    MAC_TABLE_ENTRY *pEntry;
-
-    //printk("\n%s\n", arg);
-/*
-	The BARecTearDown inupt string format should be xx:xx:xx:xx:xx:xx-d,
-		=>The six 2 digit hex-decimal number previous are the Mac address,
-		=>The seventh decimal number is the mode value.
-*/
-    if(strlen(arg) < 19)  //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and mode value in decimal format.
-		return FALSE;
-
-   	token = strchr(arg, DASH);
-	if ((token != NULL) && (strlen(token)>1))
-	{
-		mode = simple_strtol((token+1), 0, 10);
-		if (mode > MMPS_ENABLE)
-			return FALSE;
-
-		*token = '\0';
-		for (i = 0, token = rstrtok(arg, &sepValue[0]); token; token = rstrtok(NULL, &sepValue[0]), i++)
-		{
-			if((strlen(token) != 2) || (!isxdigit(*token)) || (!isxdigit(*(token+1))))
-				return FALSE;
-			AtoH(token, (PUCHAR)(&mac[i]), 1);
-		}
-		if(i != 6)
-			return FALSE;
-
-		printk("\n%02x:%02x:%02x:%02x:%02x:%02x-%02x", mac[0], mac[1],
-		       mac[2], mac[3], mac[4], mac[5], mode);
-
-		pEntry = MacTableLookup(pAd, mac);
-
-		if (pEntry) {
-		    printk("\nSendPSMPAction MIPS mode = %d\n", mode);
-		    SendPSMPAction(pAd, pEntry->Aid, mode);
-		}
-
-		return TRUE;
-	}
-
-	return FALSE;
-
-
-}
-
-INT	Set_HtMIMOPSmode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-
-	if (Value <=3 && Value >= 0)
-		pAd->CommonCfg.BACapability.field.MMPSmode = Value;
-	else
-		pAd->CommonCfg.BACapability.field.MMPSmode = 3;
-
-	SetCommonHT(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMIMOPSmode_Proc::(MIMOPS mode=%d)\n",pAd->CommonCfg.BACapability.field.MMPSmode));
-
-	return TRUE;
-}
-
-
-INT	Set_ForceShortGI_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-	if (Value == 0)
-		pAd->WIFItestbed.bShortGI = FALSE;
-	else if (Value == 1)
-		pAd->WIFItestbed.bShortGI = TRUE;
-	else
-		return FALSE; //Invalid argument
-
-	SetCommonHT(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_ForceShortGI_Proc::(ForceShortGI=%d)\n", pAd->WIFItestbed.bShortGI));
-
-	return TRUE;
-}
-
-
-
-INT	Set_ForceGF_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-	if (Value == 0)
-		pAd->WIFItestbed.bGreenField = FALSE;
-	else if (Value == 1)
-		pAd->WIFItestbed.bGreenField = TRUE;
-	else
-		return FALSE; //Invalid argument
-
-	SetCommonHT(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_ForceGF_Proc::(ForceGF=%d)\n", pAd->WIFItestbed.bGreenField));
-
-	return TRUE;
-}
-
-INT	Set_HtMimoPs_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-	if (Value == 0)
-		pAd->CommonCfg.bMIMOPSEnable = FALSE;
-	else if (Value == 1)
-		pAd->CommonCfg.bMIMOPSEnable = TRUE;
-	else
-		return FALSE; //Invalid argument
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMimoPs_Proc::(HtMimoPs=%d)\n",pAd->CommonCfg.bMIMOPSEnable));
-
-	return TRUE;
-}
-#endif // DOT11_N_SUPPORT //
-
-
-#ifdef DOT11_N_SUPPORT
-INT	SetCommonHT(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	OID_SET_HT_PHYMODE		SetHT;
-
-	if (pAd->CommonCfg.PhyMode < PHY_11ABGN_MIXED)
-		return FALSE;
-
-	SetHT.PhyMode = pAd->CommonCfg.PhyMode;
-	SetHT.TransmitNo = ((UCHAR)pAd->Antenna.field.TxPath);
-	SetHT.HtMode = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.HTMODE;
-	SetHT.ExtOffset = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.EXTCHA;
-	SetHT.MCS = MCS_AUTO;
-	SetHT.BW = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.BW;
-	SetHT.STBC = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.STBC;
-	SetHT.SHORTGI = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.ShortGI;
-
-	RTMPSetHT(pAd, &SetHT);
-
-	return TRUE;
-}
-#endif // DOT11_N_SUPPORT //
-
-INT	Set_FixedTxMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UCHAR	fix_tx_mode = FIXED_TXMODE_HT;
-
-	if (strcmp(arg, "OFDM") == 0 || strcmp(arg, "ofdm") == 0)
-	{
-		fix_tx_mode = FIXED_TXMODE_OFDM;
-	}
-	else if (strcmp(arg, "CCK") == 0 || strcmp(arg, "cck") == 0)
-	{
-        fix_tx_mode = FIXED_TXMODE_CCK;
-	}
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode = fix_tx_mode;
-#endif // CONFIG_STA_SUPPORT //
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_FixedTxMode_Proc::(FixedTxMode=%d)\n", fix_tx_mode));
-
-	return TRUE;
-}
-
-#ifdef CONFIG_APSTA_MIXED_SUPPORT
-INT	Set_OpMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ULONG Value;
-
-	Value = simple_strtol(arg, 0, 10);
-
-#ifdef RT2870
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP))
-#endif // RT2870 //
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("Can not switch operate mode on interface up !! \n"));
-		return FALSE;
-	}
-
-	if (Value == 0)
-		pAd->OpMode = OPMODE_STA;
-	else if (Value == 1)
-		pAd->OpMode = OPMODE_AP;
-	else
-		return FALSE; //Invalid argument
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_OpMode_Proc::(OpMode=%s)\n", pAd->OpMode == 1 ? "AP Mode" : "STA Mode"));
-
-	return TRUE;
-}
-#endif // CONFIG_APSTA_MIXED_SUPPORT //
-
-
-/////////////////////////////////////////////////////////////////////////
-PCHAR   RTMPGetRalinkAuthModeStr(
-    IN  NDIS_802_11_AUTHENTICATION_MODE authMode)
-{
-	switch(authMode)
-	{
-		case Ndis802_11AuthModeOpen:
-			return "OPEN";
-        default:
-		case Ndis802_11AuthModeWPAPSK:
-			return "WPAPSK";
-		case Ndis802_11AuthModeShared:
-			return "SHARED";
-		case Ndis802_11AuthModeWPA:
-			return "WPA";
-		case Ndis802_11AuthModeWPA2:
-			return "WPA2";
-		case Ndis802_11AuthModeWPA2PSK:
-			return "WPA2PSK";
-        case Ndis802_11AuthModeWPA1PSKWPA2PSK:
-			return "WPAPSKWPA2PSK";
-        case Ndis802_11AuthModeWPA1WPA2:
-			return "WPA1WPA2";
-	}
-}
-
-PCHAR   RTMPGetRalinkEncryModeStr(
-    IN  USHORT encryMode)
-{
-	switch(encryMode)
-	{
-	    default:
-		case Ndis802_11WEPDisabled:
-			return "NONE";
-		case Ndis802_11WEPEnabled:
-			return "WEP";
-		case Ndis802_11Encryption2Enabled:
-			return "TKIP";
-		case Ndis802_11Encryption3Enabled:
-			return "AES";
-        case Ndis802_11Encryption4Enabled:
-			return "TKIPAES";
-	}
-}
-
-INT RTMPShowCfgValue(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pName,
-	IN	PUCHAR			pBuf)
-{
-	INT	Status = 0;
-
-	for (PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC = RTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC++)
-	{
-		if (!strcmp(pName, PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name))
-		{
-			if(PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->show_proc(pAd, pBuf))
-				Status = -EINVAL;
-			break;  //Exit for loop.
-		}
-	}
-
-	if(PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name == NULL)
-	{
-		sprintf(pBuf, "\n");
-		for (PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC = RTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC++)
-			sprintf(pBuf, "%s%s\n", pBuf, PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name);
-	}
-
-	return Status;
-}
-
-INT	Show_SSID_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		sprintf(pBuf, "\t%s", pAd->CommonCfg.Ssid);
-#endif // CONFIG_STA_SUPPORT //
-	return 0;
-}
-
-INT	Show_WirelessMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	switch(pAd->CommonCfg.PhyMode)
-	{
-		case PHY_11BG_MIXED:
-			sprintf(pBuf, "\t11B/G");
-			break;
-		case PHY_11B:
-			sprintf(pBuf, "\t11B");
-			break;
-		case PHY_11A:
-			sprintf(pBuf, "\t11A");
-			break;
-		case PHY_11ABG_MIXED:
-			sprintf(pBuf, "\t11A/B/G");
-			break;
-		case PHY_11G:
-			sprintf(pBuf, "\t11G");
-			break;
-#ifdef DOT11_N_SUPPORT
-		case PHY_11ABGN_MIXED:
-			sprintf(pBuf, "\t11A/B/G/N");
-			break;
-		case PHY_11N_2_4G:
-			sprintf(pBuf, "\t11N only with 2.4G");
-			break;
-		case PHY_11GN_MIXED:
-			sprintf(pBuf, "\t11G/N");
-			break;
-		case PHY_11AN_MIXED:
-			sprintf(pBuf, "\t11A/N");
-			break;
-		case PHY_11BGN_MIXED:
-			sprintf(pBuf, "\t11B/G/N");
-			break;
-		case PHY_11AGN_MIXED:
-			sprintf(pBuf, "\t11A/G/N");
-			break;
-		case PHY_11N_5G:
-			sprintf(pBuf, "\t11N only with 5G");
-			break;
-#endif // DOT11_N_SUPPORT //
-		default:
-			sprintf(pBuf, "\tUnknow Value(%d)", pAd->CommonCfg.PhyMode);
-			break;
-	}
-	return 0;
-}
-
-
-INT	Show_TxBurst_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%s", pAd->CommonCfg.bEnableTxBurst ? "TRUE":"FALSE");
-	return 0;
-}
-
-INT	Show_TxPreamble_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	switch(pAd->CommonCfg.TxPreamble)
-	{
-		case Rt802_11PreambleShort:
-			sprintf(pBuf, "\tShort");
-			break;
-		case Rt802_11PreambleLong:
-			sprintf(pBuf, "\tLong");
-			break;
-		case Rt802_11PreambleAuto:
-			sprintf(pBuf, "\tAuto");
-			break;
-		default:
-			sprintf(pBuf, "\tUnknow Value(%lu)", pAd->CommonCfg.TxPreamble);
-			break;
-	}
-
-	return 0;
-}
-
-INT	Show_TxPower_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%lu", pAd->CommonCfg.TxPowerPercentage);
-	return 0;
-}
-
-INT	Show_Channel_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%d", pAd->CommonCfg.Channel);
-	return 0;
-}
-
-INT	Show_BGProtection_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	switch(pAd->CommonCfg.UseBGProtection)
-	{
-		case 1: //Always On
-			sprintf(pBuf, "\tON");
-			break;
-		case 2: //Always OFF
-			sprintf(pBuf, "\tOFF");
-			break;
-		case 0: //AUTO
-			sprintf(pBuf, "\tAuto");
-			break;
-		default:
-			sprintf(pBuf, "\tUnknow Value(%lu)", pAd->CommonCfg.UseBGProtection);
-			break;
-	}
-	return 0;
-}
-
-INT	Show_RTSThreshold_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%u", pAd->CommonCfg.RtsThreshold);
-	return 0;
-}
-
-INT	Show_FragThreshold_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%u", pAd->CommonCfg.FragmentThreshold);
-	return 0;
-}
-
-#ifdef DOT11_N_SUPPORT
-INT	Show_HtBw_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	if (pAd->CommonCfg.RegTransmitSetting.field.BW == BW_40)
-	{
-		sprintf(pBuf, "\t40 MHz");
-	}
-	else
-	{
-        sprintf(pBuf, "\t20 MHz");
-	}
-	return 0;
-}
-
-INT	Show_HtMcs_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		sprintf(pBuf, "\t%u", pAd->StaCfg.DesiredTransmitSetting.field.MCS);
-#endif // CONFIG_STA_SUPPORT //
-	return 0;
-}
-
-INT	Show_HtGi_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	switch(pAd->CommonCfg.RegTransmitSetting.field.ShortGI)
-	{
-		case GI_400:
-			sprintf(pBuf, "\tGI_400");
-			break;
-		case GI_800:
-			sprintf(pBuf, "\tGI_800");
-			break;
-		default:
-			sprintf(pBuf, "\tUnknow Value(%u)", pAd->CommonCfg.RegTransmitSetting.field.ShortGI);
-			break;
-	}
-	return 0;
-}
-
-INT	Show_HtOpMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	switch(pAd->CommonCfg.RegTransmitSetting.field.HTMODE)
-	{
-		case HTMODE_GF:
-			sprintf(pBuf, "\tGF");
-			break;
-		case HTMODE_MM:
-			sprintf(pBuf, "\tMM");
-			break;
-		default:
-			sprintf(pBuf, "\tUnknow Value(%u)", pAd->CommonCfg.RegTransmitSetting.field.HTMODE);
-			break;
-	}
-	return 0;
-}
-
-INT	Show_HtExtcha_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	switch(pAd->CommonCfg.RegTransmitSetting.field.EXTCHA)
-	{
-		case EXTCHA_BELOW:
-			sprintf(pBuf, "\tBelow");
-			break;
-		case EXTCHA_ABOVE:
-			sprintf(pBuf, "\tAbove");
-			break;
-		default:
-			sprintf(pBuf, "\tUnknow Value(%u)", pAd->CommonCfg.RegTransmitSetting.field.EXTCHA);
-			break;
-	}
-	return 0;
-}
-
-
-INT	Show_HtMpduDensity_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%u", pAd->CommonCfg.BACapability.field.MpduDensity);
-	return 0;
-}
-
-INT	Show_HtBaWinSize_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%u", pAd->CommonCfg.BACapability.field.RxBAWinLimit);
-	return 0;
-}
-
-INT	Show_HtRdg_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%s", pAd->CommonCfg.bRdg ? "TRUE":"FALSE");
-	return 0;
-}
-
-INT	Show_HtAmsdu_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%s", pAd->CommonCfg.BACapability.field.AmsduEnable ? "TRUE":"FALSE");
-	return 0;
-}
-
-INT	Show_HtAutoBa_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%s", pAd->CommonCfg.BACapability.field.AutoBA ? "TRUE":"FALSE");
-	return 0;
-}
-#endif // DOT11_N_SUPPORT //
-
-INT	Show_CountryRegion_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%d", pAd->CommonCfg.CountryRegion);
-	return 0;
-}
-
-INT	Show_CountryRegionABand_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%d", pAd->CommonCfg.CountryRegionForABand);
-	return 0;
-}
-
-INT	Show_CountryCode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%s", pAd->CommonCfg.CountryCode);
-	return 0;
-}
-
-#ifdef AGGREGATION_SUPPORT
-INT	Show_PktAggregate_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%s", pAd->CommonCfg.bAggregationCapable ? "TRUE":"FALSE");
-	return 0;
-}
-#endif // AGGREGATION_SUPPORT //
-
-#ifdef WMM_SUPPORT
-INT	Show_WmmCapable_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		sprintf(pBuf, "\t%s", pAd->CommonCfg.bWmmCapable ? "TRUE":"FALSE");
-#endif // CONFIG_STA_SUPPORT //
-
-	return 0;
-}
-#endif // WMM_SUPPORT //
-
-INT	Show_IEEE80211H_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	sprintf(pBuf, "\t%s", pAd->CommonCfg.bIEEE80211H ? "TRUE":"FALSE");
-	return 0;
-}
-
-#ifdef CONFIG_STA_SUPPORT
-INT	Show_NetworkType_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	switch(pAd->StaCfg.BssType)
-	{
-		case BSS_ADHOC:
-			sprintf(pBuf, "\tAdhoc");
-			break;
-		case BSS_INFRA:
-			sprintf(pBuf, "\tInfra");
-			break;
-		case BSS_ANY:
-			sprintf(pBuf, "\tAny");
-			break;
-		case BSS_MONITOR:
-			sprintf(pBuf, "\tMonitor");
-			break;
-		default:
-			sprintf(pBuf, "\tUnknow Value(%d)", pAd->StaCfg.BssType);
-			break;
-	}
-	return 0;
-}
-#endif // CONFIG_STA_SUPPORT //
-
-INT	Show_AuthMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	NDIS_802_11_AUTHENTICATION_MODE	AuthMode = Ndis802_11AuthModeOpen;
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		AuthMode = pAd->StaCfg.AuthMode;
-#endif // CONFIG_STA_SUPPORT //
-
-	if ((AuthMode >= Ndis802_11AuthModeOpen) &&
-		(AuthMode <= Ndis802_11AuthModeWPA1PSKWPA2PSK))
-		sprintf(pBuf, "\t%s", RTMPGetRalinkAuthModeStr(AuthMode));
-	else
-		sprintf(pBuf, "\tUnknow Value(%d)", AuthMode);
-
-	return 0;
-}
-
-INT	Show_EncrypType_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	NDIS_802_11_WEP_STATUS	WepStatus = Ndis802_11WEPDisabled;
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		WepStatus = pAd->StaCfg.WepStatus;
-#endif // CONFIG_STA_SUPPORT //
-
-	if ((WepStatus >= Ndis802_11WEPEnabled) &&
-		(WepStatus <= Ndis802_11Encryption4KeyAbsent))
-		sprintf(pBuf, "\t%s", RTMPGetRalinkEncryModeStr(WepStatus));
-	else
-		sprintf(pBuf, "\tUnknow Value(%d)", WepStatus);
-
-	return 0;
-}
-
-INT	Show_DefaultKeyID_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	UCHAR DefaultKeyId = 0;
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		DefaultKeyId = pAd->StaCfg.DefaultKeyId;
-#endif // CONFIG_STA_SUPPORT //
-
-	sprintf(pBuf, "\t%d", DefaultKeyId);
-
-	return 0;
-}
-
-INT	Show_WepKey_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN  INT				KeyIdx,
-	OUT	PUCHAR			pBuf)
-{
-	UCHAR   Key[16] = {0}, KeyLength = 0;
-	INT		index = BSS0;
-
-	KeyLength = pAd->SharedKey[index][KeyIdx].KeyLen;
-	NdisMoveMemory(Key, pAd->SharedKey[index][KeyIdx].Key, KeyLength);
-
-	//check key string is ASCII or not
-    if (RTMPCheckStrPrintAble(Key, KeyLength))
-        sprintf(pBuf, "\t%s", Key);
-    else
-    {
-        int idx;
-        sprintf(pBuf, "\t");
-        for (idx = 0; idx < KeyLength; idx++)
-            sprintf(pBuf+strlen(pBuf), "%02X", Key[idx]);
-    }
-	return 0;
-}
-
-INT	Show_Key1_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	Show_WepKey_Proc(pAd, 0, pBuf);
-	return 0;
-}
-
-INT	Show_Key2_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	Show_WepKey_Proc(pAd, 1, pBuf);
-	return 0;
-}
-
-INT	Show_Key3_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	Show_WepKey_Proc(pAd, 2, pBuf);
-	return 0;
-}
-
-INT	Show_Key4_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	Show_WepKey_Proc(pAd, 3, pBuf);
-	return 0;
-}
-
-INT	Show_WPAPSK_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUCHAR			pBuf)
-{
-	INT 	idx;
-	UCHAR	PMK[32] = {0};
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		NdisMoveMemory(PMK, pAd->StaCfg.PMK, 32);
-#endif // CONFIG_STA_SUPPORT //
-
-    sprintf(pBuf, "\tPMK = ");
-    for (idx = 0; idx < 32; idx++)
-        sprintf(pBuf+strlen(pBuf), "%02X", PMK[idx]);
-
-	return 0;
-}
-
+#include "../../rt2870/common/cmm_info.c"
diff --git a/drivers/staging/rt3070/common/cmm_sanity.c b/drivers/staging/rt3070/common/cmm_sanity.c
index 6118df8de7b..82ccf9e85f3 100644
--- a/drivers/staging/rt3070/common/cmm_sanity.c
+++ b/drivers/staging/rt3070/common/cmm_sanity.c
@@ -1,1669 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	sanity.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	John Chang  2004-09-01      add WMM support
-*/
-#include "../rt_config.h"
-
-
-extern UCHAR	CISCO_OUI[];
-
-extern UCHAR	WPA_OUI[];
-extern UCHAR	RSN_OUI[];
-extern UCHAR	WME_INFO_ELEM[];
-extern UCHAR	WME_PARM_ELEM[];
-extern UCHAR	Ccx2QosInfo[];
-extern UCHAR	RALINK_OUI[];
-extern UCHAR	BROADCOM_OUI[];
-extern UCHAR    WPS_OUI[];
-
-/*
-    ==========================================================================
-    Description:
-        MLME message sanity check
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-BOOLEAN MlmeAddBAReqSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pAddr2)
-{
-    PMLME_ADDBA_REQ_STRUCT   pInfo;
-
-    pInfo = (MLME_ADDBA_REQ_STRUCT *)Msg;
-
-    if ((MsgLen != sizeof(MLME_ADDBA_REQ_STRUCT)))
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("MlmeAddBAReqSanity fail - message lenght not correct.\n"));
-        return FALSE;
-    }
-
-    if ((pInfo->Wcid >= MAX_LEN_OF_MAC_TABLE))
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("MlmeAddBAReqSanity fail - The peer Mac is not associated yet.\n"));
-        return FALSE;
-    }
-
-	/*
-    if ((pInfo->BaBufSize > MAX_RX_REORDERBUF) || (pInfo->BaBufSize < 2))
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("MlmeAddBAReqSanity fail - Rx Reordering buffer too big or too small\n"));
-        return FALSE;
-    }
-	*/
-
-    if ((pInfo->pAddr[0]&0x01) == 0x01)
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("MlmeAddBAReqSanity fail - broadcast address not support BA\n"));
-        return FALSE;
-    }
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        MLME message sanity check
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-BOOLEAN MlmeDelBAReqSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen)
-{
-	MLME_DELBA_REQ_STRUCT *pInfo;
-	pInfo = (MLME_DELBA_REQ_STRUCT *)Msg;
-
-    if ((MsgLen != sizeof(MLME_DELBA_REQ_STRUCT)))
-    {
-        DBGPRINT(RT_DEBUG_ERROR, ("MlmeDelBAReqSanity fail - message lenght not correct.\n"));
-        return FALSE;
-    }
-
-    if ((pInfo->Wcid >= MAX_LEN_OF_MAC_TABLE))
-    {
-        DBGPRINT(RT_DEBUG_ERROR, ("MlmeDelBAReqSanity fail - The peer Mac is not associated yet.\n"));
-        return FALSE;
-    }
-
-    if ((pInfo->TID & 0xf0))
-    {
-        DBGPRINT(RT_DEBUG_ERROR, ("MlmeDelBAReqSanity fail - The peer TID is incorrect.\n"));
-        return FALSE;
-    }
-
-	if (NdisEqualMemory(pAd->MacTab.Content[pInfo->Wcid].Addr, pInfo->Addr, MAC_ADDR_LEN) == 0)
-    {
-        DBGPRINT(RT_DEBUG_ERROR, ("MlmeDelBAReqSanity fail - the peer addr dosen't exist.\n"));
-        return FALSE;
-    }
-
-    return TRUE;
-}
-
-BOOLEAN PeerAddBAReqActionSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *pMsg,
-    IN ULONG MsgLen,
-	OUT PUCHAR pAddr2)
-{
-	PFRAME_802_11 pFrame = (PFRAME_802_11)pMsg;
-	PFRAME_ADDBA_REQ pAddFrame;
-	pAddFrame = (PFRAME_ADDBA_REQ)(pMsg);
-	if (MsgLen < (sizeof(FRAME_ADDBA_REQ)))
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("PeerAddBAReqActionSanity: ADDBA Request frame length size = %ld incorrect\n", MsgLen));
-		return FALSE;
-	}
-	// we support immediate BA.
-	*(USHORT *)(&pAddFrame->BaParm) = cpu2le16(*(USHORT *)(&pAddFrame->BaParm));
-	pAddFrame->TimeOutValue = cpu2le16(pAddFrame->TimeOutValue);
-	pAddFrame->BaStartSeq.word = cpu2le16(pAddFrame->BaStartSeq.word);
-
-	if (pAddFrame->BaParm.BAPolicy != IMMED_BA)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("PeerAddBAReqActionSanity: ADDBA Request Ba Policy[%d] not support\n", pAddFrame->BaParm.BAPolicy));
-		DBGPRINT(RT_DEBUG_ERROR,("ADDBA Request. tid=%x, Bufsize=%x, AMSDUSupported=%x \n", pAddFrame->BaParm.TID, pAddFrame->BaParm.BufSize, pAddFrame->BaParm.AMSDUSupported));
-		return FALSE;
-	}
-
-	// we support immediate BA.
-	if (pAddFrame->BaParm.TID &0xfff0)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("PeerAddBAReqActionSanity: ADDBA Request incorrect TID = %d\n", pAddFrame->BaParm.TID));
-		return FALSE;
-	}
-	COPY_MAC_ADDR(pAddr2, pFrame->Hdr.Addr2);
-	return TRUE;
-}
-
-BOOLEAN PeerAddBARspActionSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *pMsg,
-    IN ULONG MsgLen)
-{
-	//PFRAME_802_11 pFrame = (PFRAME_802_11)pMsg;
-	PFRAME_ADDBA_RSP pAddFrame;
-
-	pAddFrame = (PFRAME_ADDBA_RSP)(pMsg);
-	if (MsgLen < (sizeof(FRAME_ADDBA_RSP)))
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("PeerAddBARspActionSanity: ADDBA Response frame length size = %ld incorrect\n", MsgLen));
-		return FALSE;
-	}
-	// we support immediate BA.
-	*(USHORT *)(&pAddFrame->BaParm) = cpu2le16(*(USHORT *)(&pAddFrame->BaParm));
-	pAddFrame->StatusCode = cpu2le16(pAddFrame->StatusCode);
-	pAddFrame->TimeOutValue = cpu2le16(pAddFrame->TimeOutValue);
-
-	if (pAddFrame->BaParm.BAPolicy != IMMED_BA)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("PeerAddBAReqActionSanity: ADDBA Response Ba Policy[%d] not support\n", pAddFrame->BaParm.BAPolicy));
-		return FALSE;
-	}
-
-	// we support immediate BA.
-	if (pAddFrame->BaParm.TID &0xfff0)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("PeerAddBARspActionSanity: ADDBA Response incorrect TID = %d\n", pAddFrame->BaParm.TID));
-		return FALSE;
-	}
-	return TRUE;
-
-}
-
-BOOLEAN PeerDelBAActionSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN UCHAR Wcid,
-    IN VOID *pMsg,
-    IN ULONG MsgLen )
-{
-	//PFRAME_802_11 pFrame = (PFRAME_802_11)pMsg;
-	PFRAME_DELBA_REQ  pDelFrame;
-	if (MsgLen != (sizeof(FRAME_DELBA_REQ)))
-		return FALSE;
-
-	if (Wcid >= MAX_LEN_OF_MAC_TABLE)
-		return FALSE;
-
-	pDelFrame = (PFRAME_DELBA_REQ)(pMsg);
-
-	*(USHORT *)(&pDelFrame->DelbaParm) = cpu2le16(*(USHORT *)(&pDelFrame->DelbaParm));
-	pDelFrame->ReasonCode = cpu2le16(pDelFrame->ReasonCode);
-
-	if (pDelFrame->DelbaParm.TID &0xfff0)
-		return FALSE;
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        MLME message sanity check
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-BOOLEAN PeerBeaconAndProbeRspSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    IN UCHAR  MsgChannel,
-    OUT PUCHAR pAddr2,
-    OUT PUCHAR pBssid,
-    OUT CHAR Ssid[],
-    OUT UCHAR *pSsidLen,
-    OUT UCHAR *pBssType,
-    OUT USHORT *pBeaconPeriod,
-    OUT UCHAR *pChannel,
-    OUT UCHAR *pNewChannel,
-    OUT LARGE_INTEGER *pTimestamp,
-    OUT CF_PARM *pCfParm,
-    OUT USHORT *pAtimWin,
-    OUT USHORT *pCapabilityInfo,
-    OUT UCHAR *pErp,
-    OUT UCHAR *pDtimCount,
-    OUT UCHAR *pDtimPeriod,
-    OUT UCHAR *pBcastFlag,
-    OUT UCHAR *pMessageToMe,
-    OUT UCHAR SupRate[],
-    OUT UCHAR *pSupRateLen,
-    OUT UCHAR ExtRate[],
-    OUT UCHAR *pExtRateLen,
-    OUT	UCHAR *pCkipFlag,
-    OUT	UCHAR *pAironetCellPowerLimit,
-    OUT PEDCA_PARM       pEdcaParm,
-    OUT PQBSS_LOAD_PARM  pQbssLoad,
-    OUT PQOS_CAPABILITY_PARM pQosCapability,
-    OUT ULONG *pRalinkIe,
-    OUT UCHAR		 *pHtCapabilityLen,
-#ifdef CONFIG_STA_SUPPORT
-    OUT UCHAR		 *pPreNHtCapabilityLen,
-#endif // CONFIG_STA_SUPPORT //
-    OUT HT_CAPABILITY_IE *pHtCapability,
-	OUT UCHAR		 *AddHtInfoLen,
-	OUT ADD_HT_INFO_IE *AddHtInfo,
-	OUT UCHAR *NewExtChannelOffset,		// Ht extension channel offset(above or below)
-    OUT USHORT *LengthVIE,
-    OUT	PNDIS_802_11_VARIABLE_IEs pVIE)
-{
-    CHAR				*Ptr;
-#ifdef CONFIG_STA_SUPPORT
-	CHAR 				TimLen;
-#endif // CONFIG_STA_SUPPORT //
-    PFRAME_802_11		pFrame;
-    PEID_STRUCT         pEid;
-    UCHAR				SubType;
-    UCHAR				Sanity;
-    //UCHAR				ECWMin, ECWMax;
-    //MAC_CSR9_STRUC		Csr9;
-    ULONG				Length = 0;
-
-	// For some 11a AP which didn't have DS_IE, we use two conditions to decide the channel
-	//	1. If the AP is 11n enabled, then check the control channel.
-	//	2. If the AP didn't have any info about channel, use the channel we received this frame as the channel. (May inaccuracy!!)
-	UCHAR			CtrlChannel = 0;
-
-    // Add for 3 necessary EID field check
-    Sanity = 0;
-
-    *pAtimWin = 0;
-    *pErp = 0;
-    *pDtimCount = 0;
-    *pDtimPeriod = 0;
-    *pBcastFlag = 0;
-    *pMessageToMe = 0;
-    *pExtRateLen = 0;
-    *pCkipFlag = 0;			        // Default of CkipFlag is 0
-    *pAironetCellPowerLimit = 0xFF;  // Default of AironetCellPowerLimit is 0xFF
-    *LengthVIE = 0;					// Set the length of VIE to init value 0
-    *pHtCapabilityLen = 0;					// Set the length of VIE to init value 0
-#ifdef CONFIG_STA_SUPPORT
-	if (pAd->OpMode == OPMODE_STA)
-		*pPreNHtCapabilityLen = 0;					// Set the length of VIE to init value 0
-#endif // CONFIG_STA_SUPPORT //
-    *AddHtInfoLen = 0;					// Set the length of VIE to init value 0
-    *pRalinkIe = 0;
-    *pNewChannel = 0;
-    *NewExtChannelOffset = 0xff;	//Default 0xff means no such IE
-    pCfParm->bValid = FALSE;        // default: no IE_CF found
-    pQbssLoad->bValid = FALSE;      // default: no IE_QBSS_LOAD found
-    pEdcaParm->bValid = FALSE;      // default: no IE_EDCA_PARAMETER found
-    pQosCapability->bValid = FALSE; // default: no IE_QOS_CAPABILITY found
-
-    pFrame = (PFRAME_802_11)Msg;
-
-    // get subtype from header
-    SubType = (UCHAR)pFrame->Hdr.FC.SubType;
-
-    // get Addr2 and BSSID from header
-    COPY_MAC_ADDR(pAddr2, pFrame->Hdr.Addr2);
-    COPY_MAC_ADDR(pBssid, pFrame->Hdr.Addr3);
-
-//	hex_dump("Beacon", Msg, MsgLen);
-
-    Ptr = pFrame->Octet;
-    Length += LENGTH_802_11;
-
-    // get timestamp from payload and advance the pointer
-    NdisMoveMemory(pTimestamp, Ptr, TIMESTAMP_LEN);
-
-	pTimestamp->u.LowPart = cpu2le32(pTimestamp->u.LowPart);
-	pTimestamp->u.HighPart = cpu2le32(pTimestamp->u.HighPart);
-
-    Ptr += TIMESTAMP_LEN;
-    Length += TIMESTAMP_LEN;
-
-    // get beacon interval from payload and advance the pointer
-    NdisMoveMemory(pBeaconPeriod, Ptr, 2);
-    Ptr += 2;
-    Length += 2;
-
-    // get capability info from payload and advance the pointer
-    NdisMoveMemory(pCapabilityInfo, Ptr, 2);
-    Ptr += 2;
-    Length += 2;
-
-    if (CAP_IS_ESS_ON(*pCapabilityInfo))
-        *pBssType = BSS_INFRA;
-    else
-        *pBssType = BSS_ADHOC;
-
-    pEid = (PEID_STRUCT) Ptr;
-
-    // get variable fields from payload and advance the pointer
-    while ((Length + 2 + pEid->Len) <= MsgLen)
-    {
-        //
-        // Secure copy VIE to VarIE[MAX_VIE_LEN] didn't overflow.
-        //
-        if ((*LengthVIE + pEid->Len + 2) >= MAX_VIE_LEN)
-        {
-            DBGPRINT(RT_DEBUG_WARN, ("PeerBeaconAndProbeRspSanity - Variable IEs out of resource [len(=%d) > MAX_VIE_LEN(=%d)]\n",
-                    (*LengthVIE + pEid->Len + 2), MAX_VIE_LEN));
-            break;
-        }
-
-        switch(pEid->Eid)
-        {
-            case IE_SSID:
-                // Already has one SSID EID in this beacon, ignore the second one
-                if (Sanity & 0x1)
-                    break;
-                if(pEid->Len <= MAX_LEN_OF_SSID)
-                {
-                    NdisMoveMemory(Ssid, pEid->Octet, pEid->Len);
-                    *pSsidLen = pEid->Len;
-                    Sanity |= 0x1;
-                }
-                else
-                {
-                    DBGPRINT(RT_DEBUG_TRACE, ("PeerBeaconAndProbeRspSanity - wrong IE_SSID (len=%d)\n",pEid->Len));
-                    return FALSE;
-                }
-                break;
-
-            case IE_SUPP_RATES:
-                if(pEid->Len <= MAX_LEN_OF_SUPPORTED_RATES)
-                {
-                    Sanity |= 0x2;
-                    NdisMoveMemory(SupRate, pEid->Octet, pEid->Len);
-                    *pSupRateLen = pEid->Len;
-
-                    // TODO: 2004-09-14 not a good design here, cause it exclude extra rates
-                    // from ScanTab. We should report as is. And filter out unsupported
-                    // rates in MlmeAux.
-                    // Check against the supported rates
-                    // RTMPCheckRates(pAd, SupRate, pSupRateLen);
-                }
-                else
-                {
-                    DBGPRINT(RT_DEBUG_TRACE, ("PeerBeaconAndProbeRspSanity - wrong IE_SUPP_RATES (len=%d)\n",pEid->Len));
-                    return FALSE;
-                }
-                break;
-
-            case IE_HT_CAP:
-			if (pEid->Len >= SIZE_HT_CAP_IE)  //Note: allow extension.!!
-			{
-				NdisMoveMemory(pHtCapability, pEid->Octet, sizeof(HT_CAPABILITY_IE));
-				*pHtCapabilityLen = SIZE_HT_CAP_IE;	// Nnow we only support 26 bytes.
-
-				*(USHORT *)(&pHtCapability->HtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->HtCapInfo));
-				*(USHORT *)(&pHtCapability->ExtHtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->ExtHtCapInfo));
-
-#ifdef CONFIG_STA_SUPPORT
-				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				{
-					*pPreNHtCapabilityLen = 0;	// Nnow we only support 26 bytes.
-
-					Ptr = (PUCHAR) pVIE;
-					NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid, pEid->Len + 2);
-					*LengthVIE += (pEid->Len + 2);
-				}
-#endif // CONFIG_STA_SUPPORT //
-			}
-			else
-			{
-				DBGPRINT(RT_DEBUG_WARN, ("PeerBeaconAndProbeRspSanity - wrong IE_HT_CAP. pEid->Len = %d\n", pEid->Len));
-			}
-
-		break;
-            case IE_ADD_HT:
-			if (pEid->Len >= sizeof(ADD_HT_INFO_IE))
-			{
-				// This IE allows extension, but we can ignore extra bytes beyond our knowledge , so only
-				// copy first sizeof(ADD_HT_INFO_IE)
-				NdisMoveMemory(AddHtInfo, pEid->Octet, sizeof(ADD_HT_INFO_IE));
-				*AddHtInfoLen = SIZE_ADD_HT_INFO_IE;
-
-				CtrlChannel = AddHtInfo->ControlChan;
-
-				*(USHORT *)(&AddHtInfo->AddHtInfo2) = cpu2le16(*(USHORT *)(&AddHtInfo->AddHtInfo2));
-				*(USHORT *)(&AddHtInfo->AddHtInfo3) = cpu2le16(*(USHORT *)(&AddHtInfo->AddHtInfo3));
-
-#ifdef CONFIG_STA_SUPPORT
-				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				{
-			                Ptr = (PUCHAR) pVIE;
-			                NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid, pEid->Len + 2);
-			                *LengthVIE += (pEid->Len + 2);
-				}
-#endif // CONFIG_STA_SUPPORT //
-			}
-			else
-			{
-				DBGPRINT(RT_DEBUG_WARN, ("PeerBeaconAndProbeRspSanity - wrong IE_ADD_HT. \n"));
-			}
-
-		break;
-            case IE_SECONDARY_CH_OFFSET:
-			if (pEid->Len == 1)
-			{
-				*NewExtChannelOffset = pEid->Octet[0];
-			}
-			else
-			{
-				DBGPRINT(RT_DEBUG_WARN, ("PeerBeaconAndProbeRspSanity - wrong IE_SECONDARY_CH_OFFSET. \n"));
-			}
-
-		break;
-            case IE_FH_PARM:
-                DBGPRINT(RT_DEBUG_TRACE, ("PeerBeaconAndProbeRspSanity(IE_FH_PARM) \n"));
-                break;
-
-            case IE_DS_PARM:
-                if(pEid->Len == 1)
-                {
-                    *pChannel = *pEid->Octet;
-#ifdef CONFIG_STA_SUPPORT
-					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-					{
-						if (ChannelSanity(pAd, *pChannel) == 0)
-						{
-
-							return FALSE;
-						}
-					}
-#endif // CONFIG_STA_SUPPORT //
-                    Sanity |= 0x4;
-                }
-                else
-                {
-                    DBGPRINT(RT_DEBUG_TRACE, ("PeerBeaconAndProbeRspSanity - wrong IE_DS_PARM (len=%d)\n",pEid->Len));
-                    return FALSE;
-                }
-                break;
-
-            case IE_CF_PARM:
-                if(pEid->Len == 6)
-                {
-                    pCfParm->bValid = TRUE;
-                    pCfParm->CfpCount = pEid->Octet[0];
-                    pCfParm->CfpPeriod = pEid->Octet[1];
-                    pCfParm->CfpMaxDuration = pEid->Octet[2] + 256 * pEid->Octet[3];
-                    pCfParm->CfpDurRemaining = pEid->Octet[4] + 256 * pEid->Octet[5];
-                }
-                else
-                {
-                    DBGPRINT(RT_DEBUG_TRACE, ("PeerBeaconAndProbeRspSanity - wrong IE_CF_PARM\n"));
-                    return FALSE;
-                }
-                break;
-
-            case IE_IBSS_PARM:
-                if(pEid->Len == 2)
-                {
-                    NdisMoveMemory(pAtimWin, pEid->Octet, pEid->Len);
-                }
-                else
-                {
-                    DBGPRINT(RT_DEBUG_TRACE, ("PeerBeaconAndProbeRspSanity - wrong IE_IBSS_PARM\n"));
-                    return FALSE;
-                }
-                break;
-
-#ifdef CONFIG_STA_SUPPORT
-            case IE_TIM:
-                if(INFRA_ON(pAd) && SubType == SUBTYPE_BEACON)
-                {
-                    GetTimBit((PUCHAR)pEid, pAd->StaActive.Aid, &TimLen, pBcastFlag, pDtimCount, pDtimPeriod, pMessageToMe);
-                }
-                break;
-#endif // CONFIG_STA_SUPPORT //
-            case IE_CHANNEL_SWITCH_ANNOUNCEMENT:
-                if(pEid->Len == 3)
-                {
-                	*pNewChannel = pEid->Octet[1];	//extract new channel number
-                }
-                break;
-
-            // New for WPA
-            // CCX v2 has the same IE, we need to parse that too
-            // Wifi WMM use the same IE vale, need to parse that too
-            // case IE_WPA:
-            case IE_VENDOR_SPECIFIC:
-                // Check Broadcom/Atheros 802.11n OUI version, for HT Capability IE.
-                // This HT IE is before IEEE draft set HT IE value.2006-09-28 by Jan.
-                /*if (NdisEqualMemory(pEid->Octet, BROADCOM_OUI, 3) && (pEid->Len >= 4))
-                {
-                	if ((pEid->Octet[3] == OUI_BROADCOM_HT) && (pEid->Len >= 30))
-            		{
-				{
-					NdisMoveMemory(pHtCapability, &pEid->Octet[4], sizeof(HT_CAPABILITY_IE));
-					*pHtCapabilityLen = SIZE_HT_CAP_IE;	// Nnow we only support 26 bytes.
-				}
-         		}
-                	if ((pEid->Octet[3] == OUI_BROADCOM_HT) && (pEid->Len >= 26))
-            		{
-				{
-					NdisMoveMemory(AddHtInfo, &pEid->Octet[4], sizeof(ADD_HT_INFO_IE));
-					*AddHtInfoLen = SIZE_ADD_HT_INFO_IE;	// Nnow we only support 26 bytes.
-				}
-         		}
-                }
-				*/
-                // Check the OUI version, filter out non-standard usage
-                if (NdisEqualMemory(pEid->Octet, RALINK_OUI, 3) && (pEid->Len == 7))
-                {
-                    //*pRalinkIe = pEid->Octet[3];
-                    if (pEid->Octet[3] != 0)
-        				*pRalinkIe = pEid->Octet[3];
-        			else
-        				*pRalinkIe = 0xf0000000; // Set to non-zero value (can't set bit0-2) to represent this is Ralink Chip. So at linkup, we will set ralinkchip flag.
-                }
-#ifdef CONFIG_STA_SUPPORT
-#ifdef DOT11_N_SUPPORT
-		// This HT IE is before IEEE draft set HT IE value.2006-09-28 by Jan.
-
-                // Other vendors had production before IE_HT_CAP value is assigned. To backward support those old-firmware AP,
-                // Check broadcom-defiend pre-802.11nD1.0 OUI for HT related IE, including HT Capatilities IE and HT Information IE
-                else if ((*pHtCapabilityLen == 0) && NdisEqualMemory(pEid->Octet, PRE_N_HT_OUI, 3) && (pEid->Len >= 4) && (pAd->OpMode == OPMODE_STA))
-                {
-                    if ((pEid->Octet[3] == OUI_PREN_HT_CAP) && (pEid->Len >= 30) && (*pHtCapabilityLen == 0))
-                    {
-                        NdisMoveMemory(pHtCapability, &pEid->Octet[4], sizeof(HT_CAPABILITY_IE));
-                        *pPreNHtCapabilityLen = SIZE_HT_CAP_IE;
-                    }
-
-                    if ((pEid->Octet[3] == OUI_PREN_ADD_HT) && (pEid->Len >= 26))
-                    {
-                        NdisMoveMemory(AddHtInfo, &pEid->Octet[4], sizeof(ADD_HT_INFO_IE));
-                        *AddHtInfoLen = SIZE_ADD_HT_INFO_IE;
-                    }
-                }
-#endif // DOT11_N_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-                else if (NdisEqualMemory(pEid->Octet, WPA_OUI, 4))
-                {
-                    // Copy to pVIE which will report to microsoft bssid list.
-                    Ptr = (PUCHAR) pVIE;
-                    NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid, pEid->Len + 2);
-                    *LengthVIE += (pEid->Len + 2);
-                }
-                else if (NdisEqualMemory(pEid->Octet, WME_PARM_ELEM, 6) && (pEid->Len == 24))
-                {
-                    PUCHAR ptr;
-                    int i;
-
-                    // parsing EDCA parameters
-                    pEdcaParm->bValid          = TRUE;
-                    pEdcaParm->bQAck           = FALSE; // pEid->Octet[0] & 0x10;
-                    pEdcaParm->bQueueRequest   = FALSE; // pEid->Octet[0] & 0x20;
-                    pEdcaParm->bTxopRequest    = FALSE; // pEid->Octet[0] & 0x40;
-                    pEdcaParm->EdcaUpdateCount = pEid->Octet[6] & 0x0f;
-                    pEdcaParm->bAPSDCapable    = (pEid->Octet[6] & 0x80) ? 1 : 0;
-                    ptr = &pEid->Octet[8];
-                    for (i=0; i<4; i++)
-                    {
-                        UCHAR aci = (*ptr & 0x60) >> 5; // b5~6 is AC INDEX
-                        pEdcaParm->bACM[aci]  = (((*ptr) & 0x10) == 0x10);   // b5 is ACM
-                        pEdcaParm->Aifsn[aci] = (*ptr) & 0x0f;               // b0~3 is AIFSN
-                        pEdcaParm->Cwmin[aci] = *(ptr+1) & 0x0f;             // b0~4 is Cwmin
-                        pEdcaParm->Cwmax[aci] = *(ptr+1) >> 4;               // b5~8 is Cwmax
-                        pEdcaParm->Txop[aci]  = *(ptr+2) + 256 * (*(ptr+3)); // in unit of 32-us
-                        ptr += 4; // point to next AC
-                    }
-                }
-                else if (NdisEqualMemory(pEid->Octet, WME_INFO_ELEM, 6) && (pEid->Len == 7))
-                {
-                    // parsing EDCA parameters
-                    pEdcaParm->bValid          = TRUE;
-                    pEdcaParm->bQAck           = FALSE; // pEid->Octet[0] & 0x10;
-                    pEdcaParm->bQueueRequest   = FALSE; // pEid->Octet[0] & 0x20;
-                    pEdcaParm->bTxopRequest    = FALSE; // pEid->Octet[0] & 0x40;
-                    pEdcaParm->EdcaUpdateCount = pEid->Octet[6] & 0x0f;
-                    pEdcaParm->bAPSDCapable    = (pEid->Octet[6] & 0x80) ? 1 : 0;
-
-                    // use default EDCA parameter
-                    pEdcaParm->bACM[QID_AC_BE]  = 0;
-                    pEdcaParm->Aifsn[QID_AC_BE] = 3;
-                    pEdcaParm->Cwmin[QID_AC_BE] = CW_MIN_IN_BITS;
-                    pEdcaParm->Cwmax[QID_AC_BE] = CW_MAX_IN_BITS;
-                    pEdcaParm->Txop[QID_AC_BE]  = 0;
-
-                    pEdcaParm->bACM[QID_AC_BK]  = 0;
-                    pEdcaParm->Aifsn[QID_AC_BK] = 7;
-                    pEdcaParm->Cwmin[QID_AC_BK] = CW_MIN_IN_BITS;
-                    pEdcaParm->Cwmax[QID_AC_BK] = CW_MAX_IN_BITS;
-                    pEdcaParm->Txop[QID_AC_BK]  = 0;
-
-                    pEdcaParm->bACM[QID_AC_VI]  = 0;
-                    pEdcaParm->Aifsn[QID_AC_VI] = 2;
-                    pEdcaParm->Cwmin[QID_AC_VI] = CW_MIN_IN_BITS-1;
-                    pEdcaParm->Cwmax[QID_AC_VI] = CW_MAX_IN_BITS;
-                    pEdcaParm->Txop[QID_AC_VI]  = 96;   // AC_VI: 96*32us ~= 3ms
-
-                    pEdcaParm->bACM[QID_AC_VO]  = 0;
-                    pEdcaParm->Aifsn[QID_AC_VO] = 2;
-                    pEdcaParm->Cwmin[QID_AC_VO] = CW_MIN_IN_BITS-2;
-                    pEdcaParm->Cwmax[QID_AC_VO] = CW_MAX_IN_BITS-1;
-                    pEdcaParm->Txop[QID_AC_VO]  = 48;   // AC_VO: 48*32us ~= 1.5ms
-                }
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-                else
-                {
-                }
-
-                break;
-
-            case IE_EXT_SUPP_RATES:
-                if (pEid->Len <= MAX_LEN_OF_SUPPORTED_RATES)
-                {
-                    NdisMoveMemory(ExtRate, pEid->Octet, pEid->Len);
-                    *pExtRateLen = pEid->Len;
-
-                    // TODO: 2004-09-14 not a good design here, cause it exclude extra rates
-                    // from ScanTab. We should report as is. And filter out unsupported
-                    // rates in MlmeAux.
-                    // Check against the supported rates
-                    // RTMPCheckRates(pAd, ExtRate, pExtRateLen);
-                }
-                break;
-
-            case IE_ERP:
-                if (pEid->Len == 1)
-                {
-                    *pErp = (UCHAR)pEid->Octet[0];
-                }
-                break;
-
-            case IE_AIRONET_CKIP:
-                // 0. Check Aironet IE length, it must be larger or equal to 28
-                // Cisco AP350 used length as 28
-                // Cisco AP12XX used length as 30
-                if (pEid->Len < (CKIP_NEGOTIATION_LENGTH - 2))
-                    break;
-
-                // 1. Copy CKIP flag byte to buffer for process
-                *pCkipFlag = *(pEid->Octet + 8);
-                break;
-
-            case IE_AP_TX_POWER:
-                // AP Control of Client Transmit Power
-                //0. Check Aironet IE length, it must be 6
-                if (pEid->Len != 0x06)
-                    break;
-
-                // Get cell power limit in dBm
-                if (NdisEqualMemory(pEid->Octet, CISCO_OUI, 3) == 1)
-                    *pAironetCellPowerLimit = *(pEid->Octet + 4);
-                break;
-
-            // WPA2 & 802.11i RSN
-            case IE_RSN:
-                // There is no OUI for version anymore, check the group cipher OUI before copying
-                if (RTMPEqualMemory(pEid->Octet + 2, RSN_OUI, 3))
-                {
-                    // Copy to pVIE which will report to microsoft bssid list.
-                    Ptr = (PUCHAR) pVIE;
-                    NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid, pEid->Len + 2);
-                    *LengthVIE += (pEid->Len + 2);
-                }
-                break;
-#ifdef CONFIG_STA_SUPPORT
-#ifdef EXT_BUILD_CHANNEL_LIST
-			case IE_COUNTRY:
-				Ptr = (PUCHAR) pVIE;
-                NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid, pEid->Len + 2);
-                *LengthVIE += (pEid->Len + 2);
-				break;
-#endif // EXT_BUILD_CHANNEL_LIST //
-#endif // CONFIG_STA_SUPPORT //
-            default:
-                break;
-        }
-
-        Length = Length + 2 + pEid->Len;  // Eid[1] + Len[1]+ content[Len]
-        pEid = (PEID_STRUCT)((UCHAR*)pEid + 2 + pEid->Len);
-    }
-
-    // For some 11a AP. it did not have the channel EID, patch here
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		UCHAR LatchRfChannel = MsgChannel;
-		if ((pAd->LatchRfRegs.Channel > 14) && ((Sanity & 0x4) == 0))
-		{
-			if (CtrlChannel != 0)
-				*pChannel = CtrlChannel;
-			else
-				*pChannel = LatchRfChannel;
-			Sanity |= 0x4;
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	if (Sanity != 0x7)
-	{
-		DBGPRINT(RT_DEBUG_WARN, ("PeerBeaconAndProbeRspSanity - missing field, Sanity=0x%02x\n", Sanity));
-		return FALSE;
-	}
-	else
-	{
-		return TRUE;
-	}
-
-}
-
-#ifdef DOT11N_DRAFT3
-/*
-	==========================================================================
-	Description:
-		MLME message sanity check for some IE addressed  in 802.11n d3.03.
-	Return:
-		TRUE if all parameters are OK, FALSE otherwise
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-BOOLEAN PeerBeaconAndProbeRspSanity2(
-	IN PRTMP_ADAPTER pAd,
-	IN VOID *Msg,
-	IN ULONG MsgLen,
-	OUT UCHAR 	*RegClass)
-{
-	CHAR				*Ptr;
-	PFRAME_802_11		pFrame;
-	PEID_STRUCT			pEid;
-	ULONG				Length = 0;
-
-	pFrame = (PFRAME_802_11)Msg;
-
-	*RegClass = 0;
-	Ptr = pFrame->Octet;
-	Length += LENGTH_802_11;
-
-	// get timestamp from payload and advance the pointer
-	Ptr += TIMESTAMP_LEN;
-	Length += TIMESTAMP_LEN;
-
-	// get beacon interval from payload and advance the pointer
-	Ptr += 2;
-	Length += 2;
-
-	// get capability info from payload and advance the pointer
-	Ptr += 2;
-	Length += 2;
-
-	pEid = (PEID_STRUCT) Ptr;
-
-	// get variable fields from payload and advance the pointer
-	while ((Length + 2 + pEid->Len) <= MsgLen)
-	{
-		switch(pEid->Eid)
-		{
-			case IE_SUPP_REG_CLASS:
-				if(pEid->Len > 0)
-				{
-					*RegClass = *pEid->Octet;
-				}
-				else
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("PeerBeaconAndProbeRspSanity - wrong IE_SSID (len=%d)\n",pEid->Len));
-					return FALSE;
-				}
-				break;
-		}
-
-		Length = Length + 2 + pEid->Len;  // Eid[1] + Len[1]+ content[Len]
-		pEid = (PEID_STRUCT)((UCHAR*)pEid + 2 + pEid->Len);
-	}
-
-	return TRUE;
-
-}
-#endif // DOT11N_DRAFT3 //
-
-/*
-    ==========================================================================
-    Description:
-        MLME message sanity check
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
- */
-BOOLEAN MlmeScanReqSanity(
-	IN PRTMP_ADAPTER pAd,
-	IN VOID *Msg,
-	IN ULONG MsgLen,
-	OUT UCHAR *pBssType,
-	OUT CHAR Ssid[],
-	OUT UCHAR *pSsidLen,
-	OUT UCHAR *pScanType)
-{
-	MLME_SCAN_REQ_STRUCT *Info;
-
-	Info = (MLME_SCAN_REQ_STRUCT *)(Msg);
-	*pBssType = Info->BssType;
-	*pSsidLen = Info->SsidLen;
-	NdisMoveMemory(Ssid, Info->Ssid, *pSsidLen);
-	*pScanType = Info->ScanType;
-
-	if ((*pBssType == BSS_INFRA || *pBssType == BSS_ADHOC || *pBssType == BSS_ANY)
-		&& (*pScanType == SCAN_ACTIVE || *pScanType == SCAN_PASSIVE
-#ifdef CONFIG_STA_SUPPORT
-		|| *pScanType == SCAN_CISCO_PASSIVE || *pScanType == SCAN_CISCO_ACTIVE
-		|| *pScanType == SCAN_CISCO_CHANNEL_LOAD || *pScanType == SCAN_CISCO_NOISE
-#endif // CONFIG_STA_SUPPORT //
-		))
-	{
-		return TRUE;
-	}
-	else
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("MlmeScanReqSanity fail - wrong BssType or ScanType\n"));
-		return FALSE;
-	}
-}
-
-// IRQL = DISPATCH_LEVEL
-UCHAR ChannelSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN UCHAR channel)
-{
-    int i;
-
-    for (i = 0; i < pAd->ChannelListNum; i ++)
-    {
-        if (channel == pAd->ChannelList[i].Channel)
-            return 1;
-    }
-    return 0;
-}
-
-/*
-    ==========================================================================
-    Description:
-        MLME message sanity check
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-BOOLEAN PeerDeauthSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pAddr2,
-    OUT USHORT *pReason)
-{
-    PFRAME_802_11 pFrame = (PFRAME_802_11)Msg;
-
-    COPY_MAC_ADDR(pAddr2, pFrame->Hdr.Addr2);
-    NdisMoveMemory(pReason, &pFrame->Octet[0], 2);
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        MLME message sanity check
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-BOOLEAN PeerAuthSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pAddr,
-    OUT USHORT *pAlg,
-    OUT USHORT *pSeq,
-    OUT USHORT *pStatus,
-    CHAR *pChlgText)
-{
-    PFRAME_802_11 pFrame = (PFRAME_802_11)Msg;
-
-    COPY_MAC_ADDR(pAddr,   pFrame->Hdr.Addr2);
-    NdisMoveMemory(pAlg,    &pFrame->Octet[0], 2);
-    NdisMoveMemory(pSeq,    &pFrame->Octet[2], 2);
-    NdisMoveMemory(pStatus, &pFrame->Octet[4], 2);
-
-    if ((*pAlg == Ndis802_11AuthModeOpen)
-#ifdef LEAP_SUPPORT
-      || (*pAlg == CISCO_AuthModeLEAP)
-#endif // LEAP_SUPPORT //
-      )
-    {
-        if (*pSeq == 1 || *pSeq == 2)
-        {
-            return TRUE;
-        }
-        else
-        {
-            DBGPRINT(RT_DEBUG_TRACE, ("PeerAuthSanity fail - wrong Seg#\n"));
-            return FALSE;
-        }
-    }
-    else if (*pAlg == Ndis802_11AuthModeShared)
-    {
-        if (*pSeq == 1 || *pSeq == 4)
-        {
-            return TRUE;
-        }
-        else if (*pSeq == 2 || *pSeq == 3)
-        {
-            NdisMoveMemory(pChlgText, &pFrame->Octet[8], CIPHER_TEXT_LEN);
-            return TRUE;
-        }
-        else
-        {
-            DBGPRINT(RT_DEBUG_TRACE, ("PeerAuthSanity fail - wrong Seg#\n"));
-            return FALSE;
-        }
-    }
-    else
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("PeerAuthSanity fail - wrong algorithm\n"));
-        return FALSE;
-    }
-}
-
-/*
-    ==========================================================================
-    Description:
-        MLME message sanity check
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
- */
-BOOLEAN MlmeAuthReqSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pAddr,
-    OUT ULONG *pTimeout,
-    OUT USHORT *pAlg)
-{
-    MLME_AUTH_REQ_STRUCT *pInfo;
-
-    pInfo  = (MLME_AUTH_REQ_STRUCT *)Msg;
-    COPY_MAC_ADDR(pAddr, pInfo->Addr);
-    *pTimeout = pInfo->Timeout;
-    *pAlg = pInfo->Alg;
-
-    if (((*pAlg == Ndis802_11AuthModeShared) ||(*pAlg == Ndis802_11AuthModeOpen)
-#ifdef LEAP_SUPPORT
-     || (*pAlg == CISCO_AuthModeLEAP)
-#endif // LEAP_SUPPORT //
-     	) &&
-        ((*pAddr & 0x01) == 0))
-    {
-        return TRUE;
-    }
-    else
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("MlmeAuthReqSanity fail - wrong algorithm\n"));
-        return FALSE;
-    }
-}
-
-/*
-    ==========================================================================
-    Description:
-        MLME message sanity check
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-BOOLEAN MlmeAssocReqSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pApAddr,
-    OUT USHORT *pCapabilityInfo,
-    OUT ULONG *pTimeout,
-    OUT USHORT *pListenIntv)
-{
-    MLME_ASSOC_REQ_STRUCT *pInfo;
-
-    pInfo = (MLME_ASSOC_REQ_STRUCT *)Msg;
-    *pTimeout = pInfo->Timeout;                             // timeout
-    COPY_MAC_ADDR(pApAddr, pInfo->Addr);                   // AP address
-    *pCapabilityInfo = pInfo->CapabilityInfo;               // capability info
-    *pListenIntv = pInfo->ListenIntv;
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        MLME message sanity check
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-BOOLEAN PeerDisassocSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pAddr2,
-    OUT USHORT *pReason)
-{
-    PFRAME_802_11 pFrame = (PFRAME_802_11)Msg;
-
-    COPY_MAC_ADDR(pAddr2, pFrame->Hdr.Addr2);
-    NdisMoveMemory(pReason, &pFrame->Octet[0], 2);
-
-    return TRUE;
-}
-
-/*
-	========================================================================
-	Routine Description:
-		Sanity check NetworkType (11b, 11g or 11a)
-
-	Arguments:
-		pBss - Pointer to BSS table.
-
-	Return Value:
-        Ndis802_11DS .......(11b)
-        Ndis802_11OFDM24....(11g)
-        Ndis802_11OFDM5.....(11a)
-
-	IRQL = DISPATCH_LEVEL
-
-	========================================================================
-*/
-NDIS_802_11_NETWORK_TYPE NetworkTypeInUseSanity(
-    IN PBSS_ENTRY pBss)
-{
-	NDIS_802_11_NETWORK_TYPE	NetWorkType;
-	UCHAR						rate, i;
-
-	NetWorkType = Ndis802_11DS;
-
-	if (pBss->Channel <= 14)
-	{
-		//
-		// First check support Rate.
-		//
-		for (i = 0; i < pBss->SupRateLen; i++)
-		{
-			rate = pBss->SupRate[i] & 0x7f; // Mask out basic rate set bit
-			if ((rate == 2) || (rate == 4) || (rate == 11) || (rate == 22))
-			{
-				continue;
-			}
-			else
-			{
-				//
-				// Otherwise (even rate > 108) means Ndis802_11OFDM24
-				//
-				NetWorkType = Ndis802_11OFDM24;
-				break;
-			}
-		}
-
-		//
-		// Second check Extend Rate.
-		//
-		if (NetWorkType != Ndis802_11OFDM24)
-		{
-			for (i = 0; i < pBss->ExtRateLen; i++)
-			{
-				rate = pBss->SupRate[i] & 0x7f; // Mask out basic rate set bit
-				if ((rate == 2) || (rate == 4) || (rate == 11) || (rate == 22))
-				{
-					continue;
-				}
-				else
-				{
-					//
-					// Otherwise (even rate > 108) means Ndis802_11OFDM24
-					//
-					NetWorkType = Ndis802_11OFDM24;
-					break;
-				}
-			}
-		}
-	}
-	else
-	{
-		NetWorkType = Ndis802_11OFDM5;
-	}
-
-    if (pBss->HtCapabilityLen != 0)
-    {
-        if (NetWorkType == Ndis802_11OFDM5)
-            NetWorkType = Ndis802_11OFDM5_N;
-        else
-            NetWorkType = Ndis802_11OFDM24_N;
-    }
-
-	return NetWorkType;
-}
-
-/*
-    ==========================================================================
-    Description:
-        WPA message sanity check
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
- */
-BOOLEAN PeerWpaMessageSanity(
-    IN 	PRTMP_ADAPTER 		pAd,
-    IN 	PEAPOL_PACKET 		pMsg,
-    IN 	ULONG 				MsgLen,
-    IN 	UCHAR				MsgType,
-    IN 	MAC_TABLE_ENTRY  	*pEntry)
-{
-	UCHAR			mic[LEN_KEY_DESC_MIC], digest[80], KEYDATA[MAX_LEN_OF_RSNIE];
-	BOOLEAN			bReplayDiff = FALSE;
-	BOOLEAN			bWPA2 = FALSE;
-	KEY_INFO		EapolKeyInfo;
-	UCHAR			GroupKeyIndex = 0;
-
-
-	NdisZeroMemory(mic, sizeof(mic));
-	NdisZeroMemory(digest, sizeof(digest));
-	NdisZeroMemory(KEYDATA, sizeof(KEYDATA));
-	NdisZeroMemory((PUCHAR)&EapolKeyInfo, sizeof(EapolKeyInfo));
-
-	NdisMoveMemory((PUCHAR)&EapolKeyInfo, (PUCHAR)&pMsg->KeyDesc.KeyInfo, sizeof(KEY_INFO));
-
-	*((USHORT *)&EapolKeyInfo) = cpu2le16(*((USHORT *)&EapolKeyInfo));
-
-	// Choose WPA2 or not
-	if ((pEntry->AuthMode == Ndis802_11AuthModeWPA2) || (pEntry->AuthMode == Ndis802_11AuthModeWPA2PSK))
-		bWPA2 = TRUE;
-
-	// 0. Check MsgType
-	if ((MsgType > EAPOL_GROUP_MSG_2) || (MsgType < EAPOL_PAIR_MSG_1))
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("The message type is invalid(%d)! \n", MsgType));
-		return FALSE;
-	}
-
-	// 1. Replay counter check
- 	if (MsgType == EAPOL_PAIR_MSG_1 || MsgType == EAPOL_PAIR_MSG_3 || MsgType == EAPOL_GROUP_MSG_1)	// For supplicant
-    {
-    	// First validate replay counter, only accept message with larger replay counter.
-		// Let equal pass, some AP start with all zero replay counter
-		UCHAR	ZeroReplay[LEN_KEY_DESC_REPLAY];
-
-        NdisZeroMemory(ZeroReplay, LEN_KEY_DESC_REPLAY);
-		if ((RTMPCompareMemory(pMsg->KeyDesc.ReplayCounter, pEntry->R_Counter, LEN_KEY_DESC_REPLAY) != 1) &&
-			(RTMPCompareMemory(pMsg->KeyDesc.ReplayCounter, ZeroReplay, LEN_KEY_DESC_REPLAY) != 0))
-    	{
-			bReplayDiff = TRUE;
-    	}
- 	}
-	else if (MsgType == EAPOL_PAIR_MSG_2 || MsgType == EAPOL_PAIR_MSG_4 || MsgType == EAPOL_GROUP_MSG_2)	// For authenticator
-	{
-		// check Replay Counter coresponds to MSG from authenticator, otherwise discard
-    	if (!NdisEqualMemory(pMsg->KeyDesc.ReplayCounter, pEntry->R_Counter, LEN_KEY_DESC_REPLAY))
-    	{
-			bReplayDiff = TRUE;
-    	}
-	}
-
-	// Replay Counter different condition
-	if (bReplayDiff)
-	{
-		// send wireless event - for replay counter different
-		if (pAd->CommonCfg.bWirelessEvent)
-			RTMPSendWirelessEvent(pAd, IW_REPLAY_COUNTER_DIFF_EVENT_FLAG, pEntry->Addr, pEntry->apidx, 0);
-
-		if (MsgType < EAPOL_GROUP_MSG_1)
-		{
-           	DBGPRINT(RT_DEBUG_ERROR, ("Replay Counter Different in pairwise msg %d of 4-way handshake!\n", MsgType));
-		}
-		else
-		{
-			DBGPRINT(RT_DEBUG_ERROR, ("Replay Counter Different in group msg %d of 2-way handshake!\n", (MsgType - EAPOL_PAIR_MSG_4)));
-		}
-
-		hex_dump("Receive replay counter ", pMsg->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-		hex_dump("Current replay counter ", pEntry->R_Counter, LEN_KEY_DESC_REPLAY);
-        return FALSE;
-	}
-
-	// 2. Verify MIC except Pairwise Msg1
-	if (MsgType != EAPOL_PAIR_MSG_1)
-	{
-		UCHAR			rcvd_mic[LEN_KEY_DESC_MIC];
-
-		// Record the received MIC for check later
-		NdisMoveMemory(rcvd_mic, pMsg->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
-		NdisZeroMemory(pMsg->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
-
-        if (pEntry->WepStatus == Ndis802_11Encryption2Enabled)	// TKIP
-        {
-            hmac_md5(pEntry->PTK, LEN_EAP_MICK, (PUCHAR)pMsg, MsgLen, mic);
-        }
-        else if (pEntry->WepStatus == Ndis802_11Encryption3Enabled)	// AES
-        {
-            HMAC_SHA1((PUCHAR)pMsg, MsgLen, pEntry->PTK, LEN_EAP_MICK, digest);
-            NdisMoveMemory(mic, digest, LEN_KEY_DESC_MIC);
-        }
-
-        if (!NdisEqualMemory(rcvd_mic, mic, LEN_KEY_DESC_MIC))
-        {
-			// send wireless event - for MIC different
-			if (pAd->CommonCfg.bWirelessEvent)
-				RTMPSendWirelessEvent(pAd, IW_MIC_DIFF_EVENT_FLAG, pEntry->Addr, pEntry->apidx, 0);
-
-			if (MsgType < EAPOL_GROUP_MSG_1)
-			{
-            	DBGPRINT(RT_DEBUG_ERROR, ("MIC Different in pairwise msg %d of 4-way handshake!\n", MsgType));
-			}
-			else
-			{
-				DBGPRINT(RT_DEBUG_ERROR, ("MIC Different in group msg %d of 2-way handshake!\n", (MsgType - EAPOL_PAIR_MSG_4)));
-			}
-
-			hex_dump("Received MIC", rcvd_mic, LEN_KEY_DESC_MIC);
-			hex_dump("Desired  MIC", mic, LEN_KEY_DESC_MIC);
-
-			return FALSE;
-        }
-	}
-
-	// Extract the context of the Key Data field if it exist
-	// The field in pairwise_msg_2_WPA1(WPA2) & pairwise_msg_3_WPA1 is un-encrypted.
-	// The field in group_msg_1_WPA1(WPA2) & pairwise_msg_3_WPA2 is encrypted.
-	if (pMsg->KeyDesc.KeyDataLen[1] > 0)
-	{
-		// Decrypt this field
-		if ((MsgType == EAPOL_PAIR_MSG_3 && bWPA2) || (MsgType == EAPOL_GROUP_MSG_1))
-		{
-			if(pEntry->WepStatus == Ndis802_11Encryption3Enabled)
-			{
-				// AES
-				AES_GTK_KEY_UNWRAP(&pEntry->PTK[16], KEYDATA, pMsg->KeyDesc.KeyDataLen[1],pMsg->KeyDesc.KeyData);
-			}
-			else
-			{
-				INT 	i;
-				UCHAR   Key[32];
-				// Decrypt TKIP GTK
-				// Construct 32 bytes RC4 Key
-				NdisMoveMemory(Key, pMsg->KeyDesc.KeyIv, 16);
-				NdisMoveMemory(&Key[16], &pEntry->PTK[16], 16);
-				ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, Key, 32);
-				//discard first 256 bytes
-				for(i = 0; i < 256; i++)
-					ARCFOUR_BYTE(&pAd->PrivateInfo.WEPCONTEXT);
-				// Decrypt GTK. Becareful, there is no ICV to check the result is correct or not
-				ARCFOUR_DECRYPT(&pAd->PrivateInfo.WEPCONTEXT, KEYDATA, pMsg->KeyDesc.KeyData, pMsg->KeyDesc.KeyDataLen[1]);
-			}
-
-			if (!bWPA2 && (MsgType == EAPOL_GROUP_MSG_1))
-				GroupKeyIndex = EapolKeyInfo.KeyIndex;
-
-		}
-		else if ((MsgType == EAPOL_PAIR_MSG_2) || (MsgType == EAPOL_PAIR_MSG_3 && !bWPA2))
-		{
-			NdisMoveMemory(KEYDATA, pMsg->KeyDesc.KeyData, pMsg->KeyDesc.KeyDataLen[1]);
-		}
-		else
-		{
-
-			return TRUE;
-		}
-
-		// Parse Key Data field to
-		// 1. verify RSN IE for pairwise_msg_2_WPA1(WPA2) ,pairwise_msg_3_WPA1(WPA2)
-		// 2. verify KDE format for pairwise_msg_3_WPA2, group_msg_1_WPA2
-		// 3. update shared key for pairwise_msg_3_WPA2, group_msg_1_WPA1(WPA2)
-		if (!RTMPParseEapolKeyData(pAd, KEYDATA, pMsg->KeyDesc.KeyDataLen[1], GroupKeyIndex, MsgType, bWPA2, pEntry))
-		{
-			return FALSE;
-		}
-	}
-
-	return TRUE;
-
-}
-
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-BOOLEAN MlmeDlsReqSanity(
-	IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PRT_802_11_DLS *pDLS,
-    OUT PUSHORT pReason)
-{
-	MLME_DLS_REQ_STRUCT *pInfo;
-
-    pInfo = (MLME_DLS_REQ_STRUCT *)Msg;
-
-	*pDLS = pInfo->pDLS;
-	*pReason = pInfo->Reason;
-
-	return TRUE;
-}
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef QOS_DLS_SUPPORT
-BOOLEAN PeerDlsReqSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pDA,
-    OUT PUCHAR pSA,
-    OUT USHORT *pCapabilityInfo,
-    OUT USHORT *pDlsTimeout,
-    OUT UCHAR *pRatesLen,
-    OUT UCHAR Rates[],
-	OUT UCHAR *pHtCapabilityLen,
-    OUT HT_CAPABILITY_IE *pHtCapability)
-{
-	CHAR            *Ptr;
-    PFRAME_802_11	Fr = (PFRAME_802_11)Msg;
-	PEID_STRUCT  eid_ptr;
-
-    // to prevent caller from using garbage output value
-    *pCapabilityInfo	= 0;
-    *pDlsTimeout	= 0;
-	*pHtCapabilityLen = 0;
-
-    Ptr = Fr->Octet;
-
-	// offset to destination MAC address (Category and Action field)
-    Ptr += 2;
-
-    // get DA from payload and advance the pointer
-    NdisMoveMemory(pDA, Ptr, MAC_ADDR_LEN);
-    Ptr += MAC_ADDR_LEN;
-
-    // get SA from payload and advance the pointer
-    NdisMoveMemory(pSA, Ptr, MAC_ADDR_LEN);
-    Ptr += MAC_ADDR_LEN;
-
-    // get capability info from payload and advance the pointer
-    NdisMoveMemory(pCapabilityInfo, Ptr, 2);
-    Ptr += 2;
-
-    // get capability info from payload and advance the pointer
-    NdisMoveMemory(pDlsTimeout, Ptr, 2);
-    Ptr += 2;
-
-	// Category and Action field + DA + SA + capability + Timeout
-	eid_ptr = (PEID_STRUCT) &Fr->Octet[18];
-
-	while (((UCHAR*)eid_ptr + eid_ptr->Len + 1) < ((UCHAR*)Fr + MsgLen))
-	{
-		switch(eid_ptr->Eid)
-		{
-			case IE_SUPP_RATES:
-                if ((eid_ptr->Len <= MAX_LEN_OF_SUPPORTED_RATES) && (eid_ptr->Len > 0))
-                {
-                    NdisMoveMemory(Rates, eid_ptr->Octet, eid_ptr->Len);
-                    DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsReqSanity - IE_SUPP_RATES., Len=%d. Rates[0]=%x\n",eid_ptr->Len, Rates[0]));
-                    DBGPRINT(RT_DEBUG_TRACE, ("Rates[1]=%x %x %x %x %x %x %x\n", Rates[1], Rates[2], Rates[3], Rates[4], Rates[5], Rates[6], Rates[7]));
-                    *pRatesLen = eid_ptr->Len;
-                }
-                else
-                {
-                    *pRatesLen = 8;
-					Rates[0] = 0x82;
-					Rates[1] = 0x84;
-					Rates[2] = 0x8b;
-					Rates[3] = 0x96;
-					Rates[4] = 0x12;
-					Rates[5] = 0x24;
-					Rates[6] = 0x48;
-					Rates[7] = 0x6c;
-                    DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsReqSanity - wrong IE_SUPP_RATES., Len=%d\n",eid_ptr->Len));
-                }
-				break;
-
-			case IE_EXT_SUPP_RATES:
-                if (eid_ptr->Len + *pRatesLen <= MAX_LEN_OF_SUPPORTED_RATES)
-                {
-                    NdisMoveMemory(&Rates[*pRatesLen], eid_ptr->Octet, eid_ptr->Len);
-                    *pRatesLen = (*pRatesLen) + eid_ptr->Len;
-                }
-                else
-                {
-                    NdisMoveMemory(&Rates[*pRatesLen], eid_ptr->Octet, MAX_LEN_OF_SUPPORTED_RATES - (*pRatesLen));
-                    *pRatesLen = MAX_LEN_OF_SUPPORTED_RATES;
-                }
-				break;
-
-			case IE_HT_CAP:
-				if (eid_ptr->Len >= sizeof(HT_CAPABILITY_IE))
-				{
-					NdisMoveMemory(pHtCapability, eid_ptr->Octet, sizeof(HT_CAPABILITY_IE));
-
-					*(USHORT *)(&pHtCapability->HtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->HtCapInfo));
-					*(USHORT *)(&pHtCapability->ExtHtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->ExtHtCapInfo));
-					*pHtCapabilityLen = sizeof(HT_CAPABILITY_IE);
-
-					DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsReqSanity - IE_HT_CAP\n"));
-				}
-				else
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsReqSanity - wrong IE_HT_CAP.eid_ptr->Len = %d\n", eid_ptr->Len));
-				}
-				break;
-
-			default:
-				break;
-		}
-
-		eid_ptr = (PEID_STRUCT)((UCHAR*)eid_ptr + 2 + eid_ptr->Len);
-	}
-
-    return TRUE;
-}
-
-BOOLEAN PeerDlsRspSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pDA,
-    OUT PUCHAR pSA,
-    OUT USHORT *pCapabilityInfo,
-    OUT USHORT *pStatus,
-    OUT UCHAR *pRatesLen,
-    OUT UCHAR Rates[],
-    OUT UCHAR *pHtCapabilityLen,
-    OUT HT_CAPABILITY_IE *pHtCapability)
-{
-    CHAR            *Ptr;
-    PFRAME_802_11	Fr = (PFRAME_802_11)Msg;
-	PEID_STRUCT  eid_ptr;
-
-    // to prevent caller from using garbage output value
-    *pStatus		= 0;
-    *pCapabilityInfo	= 0;
-	*pHtCapabilityLen = 0;
-
-    Ptr = Fr->Octet;
-
-	// offset to destination MAC address (Category and Action field)
-    Ptr += 2;
-
-	// get status code from payload and advance the pointer
-    NdisMoveMemory(pStatus, Ptr, 2);
-    Ptr += 2;
-
-    // get DA from payload and advance the pointer
-    NdisMoveMemory(pDA, Ptr, MAC_ADDR_LEN);
-    Ptr += MAC_ADDR_LEN;
-
-    // get SA from payload and advance the pointer
-    NdisMoveMemory(pSA, Ptr, MAC_ADDR_LEN);
-    Ptr += MAC_ADDR_LEN;
-
-	if (pStatus == 0)
-	{
-	    // get capability info from payload and advance the pointer
-	    NdisMoveMemory(pCapabilityInfo, Ptr, 2);
-	    Ptr += 2;
-	}
-
-	// Category and Action field + status code + DA + SA + capability
-	eid_ptr = (PEID_STRUCT) &Fr->Octet[18];
-
-	while (((UCHAR*)eid_ptr + eid_ptr->Len + 1) < ((UCHAR*)Fr + MsgLen))
-	{
-		switch(eid_ptr->Eid)
-		{
-			case IE_SUPP_RATES:
-                if ((eid_ptr->Len <= MAX_LEN_OF_SUPPORTED_RATES) && (eid_ptr->Len > 0))
-                {
-                    NdisMoveMemory(Rates, eid_ptr->Octet, eid_ptr->Len);
-                    DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsRspSanity - IE_SUPP_RATES., Len=%d. Rates[0]=%x\n",eid_ptr->Len, Rates[0]));
-                    DBGPRINT(RT_DEBUG_TRACE, ("Rates[1]=%x %x %x %x %x %x %x\n", Rates[1], Rates[2], Rates[3], Rates[4], Rates[5], Rates[6], Rates[7]));
-                    *pRatesLen = eid_ptr->Len;
-                }
-                else
-                {
-                    *pRatesLen = 8;
-					Rates[0] = 0x82;
-					Rates[1] = 0x84;
-					Rates[2] = 0x8b;
-					Rates[3] = 0x96;
-					Rates[4] = 0x12;
-					Rates[5] = 0x24;
-					Rates[6] = 0x48;
-					Rates[7] = 0x6c;
-                    DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsRspSanity - wrong IE_SUPP_RATES., Len=%d\n",eid_ptr->Len));
-                }
-				break;
-
-			case IE_EXT_SUPP_RATES:
-                if (eid_ptr->Len + *pRatesLen <= MAX_LEN_OF_SUPPORTED_RATES)
-                {
-                    NdisMoveMemory(&Rates[*pRatesLen], eid_ptr->Octet, eid_ptr->Len);
-                    *pRatesLen = (*pRatesLen) + eid_ptr->Len;
-                }
-                else
-                {
-                    NdisMoveMemory(&Rates[*pRatesLen], eid_ptr->Octet, MAX_LEN_OF_SUPPORTED_RATES - (*pRatesLen));
-                    *pRatesLen = MAX_LEN_OF_SUPPORTED_RATES;
-                }
-				break;
-
-			case IE_HT_CAP:
-				if (eid_ptr->Len >= sizeof(HT_CAPABILITY_IE))
-				{
-					NdisMoveMemory(pHtCapability, eid_ptr->Octet, sizeof(HT_CAPABILITY_IE));
-
-					*(USHORT *)(&pHtCapability->HtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->HtCapInfo));
-					*(USHORT *)(&pHtCapability->ExtHtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->ExtHtCapInfo));
-					*pHtCapabilityLen = sizeof(HT_CAPABILITY_IE);
-
-					DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsRspSanity - IE_HT_CAP\n"));
-				}
-				else
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsRspSanity - wrong IE_HT_CAP.eid_ptr->Len = %d\n", eid_ptr->Len));
-				}
-				break;
-
-			default:
-				break;
-		}
-
-		eid_ptr = (PEID_STRUCT)((UCHAR*)eid_ptr + 2 + eid_ptr->Len);
-	}
-
-    return TRUE;
-}
-
-BOOLEAN PeerDlsTearDownSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pDA,
-    OUT PUCHAR pSA,
-    OUT USHORT *pReason)
-{
-    CHAR            *Ptr;
-    PFRAME_802_11	Fr = (PFRAME_802_11)Msg;
-
-    // to prevent caller from using garbage output value
-    *pReason	= 0;
-
-    Ptr = Fr->Octet;
-
-	// offset to destination MAC address (Category and Action field)
-    Ptr += 2;
-
-    // get DA from payload and advance the pointer
-    NdisMoveMemory(pDA, Ptr, MAC_ADDR_LEN);
-    Ptr += MAC_ADDR_LEN;
-
-    // get SA from payload and advance the pointer
-    NdisMoveMemory(pSA, Ptr, MAC_ADDR_LEN);
-    Ptr += MAC_ADDR_LEN;
-
-	// get reason code from payload and advance the pointer
-    NdisMoveMemory(pReason, Ptr, 2);
-    Ptr += 2;
-
-    return TRUE;
-}
-#endif // QOS_DLS_SUPPORT //
-
+#include "../../rt2870/common/cmm_sanity.c"
diff --git a/drivers/staging/rt3070/common/cmm_sync.c b/drivers/staging/rt3070/common/cmm_sync.c
index 2be7c77a384..3b517420f48 100644
--- a/drivers/staging/rt3070/common/cmm_sync.c
+++ b/drivers/staging/rt3070/common/cmm_sync.c
@@ -1,711 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	sync.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	John Chang	2004-09-01      modified for rt2561/2661
-*/
-#include "../rt_config.h"
-
-// 2.4 Ghz channel plan index in the TxPower arrays.
-#define	BG_BAND_REGION_0_START	0			// 1,2,3,4,5,6,7,8,9,10,11
-#define	BG_BAND_REGION_0_SIZE	11
-#define	BG_BAND_REGION_1_START	0			// 1,2,3,4,5,6,7,8,9,10,11,12,13
-#define	BG_BAND_REGION_1_SIZE	13
-#define	BG_BAND_REGION_2_START	9			// 10,11
-#define	BG_BAND_REGION_2_SIZE	2
-#define	BG_BAND_REGION_3_START	9			// 10,11,12,13
-#define	BG_BAND_REGION_3_SIZE	4
-#define	BG_BAND_REGION_4_START	13			// 14
-#define	BG_BAND_REGION_4_SIZE	1
-#define	BG_BAND_REGION_5_START	0			// 1,2,3,4,5,6,7,8,9,10,11,12,13,14
-#define	BG_BAND_REGION_5_SIZE	14
-#define	BG_BAND_REGION_6_START	2			// 3,4,5,6,7,8,9
-#define	BG_BAND_REGION_6_SIZE	7
-#define	BG_BAND_REGION_7_START	4			// 5,6,7,8,9,10,11,12,13
-#define	BG_BAND_REGION_7_SIZE	9
-#define	BG_BAND_REGION_31_START	0			// 1,2,3,4,5,6,7,8,9,10,11,12,13,14
-#define	BG_BAND_REGION_31_SIZE	14
-
-// 5 Ghz channel plan index in the TxPower arrays.
-UCHAR A_BAND_REGION_0_CHANNEL_LIST[]={36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165};
-UCHAR A_BAND_REGION_1_CHANNEL_LIST[]={36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140};
-UCHAR A_BAND_REGION_2_CHANNEL_LIST[]={36, 40, 44, 48, 52, 56, 60, 64};
-UCHAR A_BAND_REGION_3_CHANNEL_LIST[]={52, 56, 60, 64, 149, 153, 157, 161};
-UCHAR A_BAND_REGION_4_CHANNEL_LIST[]={149, 153, 157, 161, 165};
-UCHAR A_BAND_REGION_5_CHANNEL_LIST[]={149, 153, 157, 161};
-UCHAR A_BAND_REGION_6_CHANNEL_LIST[]={36, 40, 44, 48};
-UCHAR A_BAND_REGION_7_CHANNEL_LIST[]={36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165};
-UCHAR A_BAND_REGION_8_CHANNEL_LIST[]={52, 56, 60, 64};
-UCHAR A_BAND_REGION_9_CHANNEL_LIST[]={36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165};
-UCHAR A_BAND_REGION_10_CHANNEL_LIST[]={36, 40, 44, 48, 149, 153, 157, 161, 165};
-UCHAR A_BAND_REGION_11_CHANNEL_LIST[]={36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161};
-
-//BaSizeArray follows the 802.11n definition as MaxRxFactor.  2^(13+factor) bytes. When factor =0, it's about Ba buffer size =8.
-UCHAR BaSizeArray[4] = {8,16,32,64};
-
-/*
-	==========================================================================
-	Description:
-		Update StaCfg->ChannelList[] according to 1) Country Region 2) RF IC type,
-		and 3) PHY-mode user selected.
-		The outcome is used by driver when doing site survey.
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID BuildChannelList(
-	IN PRTMP_ADAPTER pAd)
-{
-	UCHAR i, j, index=0, num=0;
-	PUCHAR	pChannelList = NULL;
-
-	NdisZeroMemory(pAd->ChannelList, MAX_NUM_OF_CHANNELS * sizeof(CHANNEL_TX_POWER));
-
-	// if not 11a-only mode, channel list starts from 2.4Ghz band
-	if ((pAd->CommonCfg.PhyMode != PHY_11A)
-#ifdef DOT11_N_SUPPORT
-		&& (pAd->CommonCfg.PhyMode != PHY_11AN_MIXED) && (pAd->CommonCfg.PhyMode != PHY_11N_5G)
-#endif // DOT11_N_SUPPORT //
-	)
-	{
-		switch (pAd->CommonCfg.CountryRegion  & 0x7f)
-		{
-			case REGION_0_BG_BAND:	// 1 -11
-				NdisMoveMemory(&pAd->ChannelList[index], &pAd->TxPower[BG_BAND_REGION_0_START], sizeof(CHANNEL_TX_POWER) * BG_BAND_REGION_0_SIZE);
-				index += BG_BAND_REGION_0_SIZE;
-				break;
-			case REGION_1_BG_BAND:	// 1 - 13
-				NdisMoveMemory(&pAd->ChannelList[index], &pAd->TxPower[BG_BAND_REGION_1_START], sizeof(CHANNEL_TX_POWER) * BG_BAND_REGION_1_SIZE);
-				index += BG_BAND_REGION_1_SIZE;
-				break;
-			case REGION_2_BG_BAND:	// 10 - 11
-				NdisMoveMemory(&pAd->ChannelList[index], &pAd->TxPower[BG_BAND_REGION_2_START], sizeof(CHANNEL_TX_POWER) * BG_BAND_REGION_2_SIZE);
-				index += BG_BAND_REGION_2_SIZE;
-				break;
-			case REGION_3_BG_BAND:	// 10 - 13
-				NdisMoveMemory(&pAd->ChannelList[index], &pAd->TxPower[BG_BAND_REGION_3_START], sizeof(CHANNEL_TX_POWER) * BG_BAND_REGION_3_SIZE);
-				index += BG_BAND_REGION_3_SIZE;
-				break;
-			case REGION_4_BG_BAND:	// 14
-				NdisMoveMemory(&pAd->ChannelList[index], &pAd->TxPower[BG_BAND_REGION_4_START], sizeof(CHANNEL_TX_POWER) * BG_BAND_REGION_4_SIZE);
-				index += BG_BAND_REGION_4_SIZE;
-				break;
-			case REGION_5_BG_BAND:	// 1 - 14
-				NdisMoveMemory(&pAd->ChannelList[index], &pAd->TxPower[BG_BAND_REGION_5_START], sizeof(CHANNEL_TX_POWER) * BG_BAND_REGION_5_SIZE);
-				index += BG_BAND_REGION_5_SIZE;
-				break;
-			case REGION_6_BG_BAND:	// 3 - 9
-				NdisMoveMemory(&pAd->ChannelList[index], &pAd->TxPower[BG_BAND_REGION_6_START], sizeof(CHANNEL_TX_POWER) * BG_BAND_REGION_6_SIZE);
-				index += BG_BAND_REGION_6_SIZE;
-				break;
-			case REGION_7_BG_BAND:  // 5 - 13
-				NdisMoveMemory(&pAd->ChannelList[index], &pAd->TxPower[BG_BAND_REGION_7_START], sizeof(CHANNEL_TX_POWER) * BG_BAND_REGION_7_SIZE);
-				index += BG_BAND_REGION_7_SIZE;
-				break;
-			case REGION_31_BG_BAND:	// 1 - 14
-				NdisMoveMemory(&pAd->ChannelList[index], &pAd->TxPower[BG_BAND_REGION_31_START], sizeof(CHANNEL_TX_POWER) * BG_BAND_REGION_31_SIZE);
-				index += BG_BAND_REGION_31_SIZE;
-				break;
-			default:            // Error. should never happen
-				break;
-		}
-		for (i=0; i<index; i++)
-			pAd->ChannelList[i].MaxTxPwr = 20;
-	}
-
-	if ((pAd->CommonCfg.PhyMode == PHY_11A) || (pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED)
-#ifdef DOT11_N_SUPPORT
-		|| (pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11AN_MIXED)
-		|| (pAd->CommonCfg.PhyMode == PHY_11AGN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11N_5G)
-#endif // DOT11_N_SUPPORT //
-	)
-	{
-		switch (pAd->CommonCfg.CountryRegionForABand & 0x7f)
-		{
-			case REGION_0_A_BAND:
-				num = sizeof(A_BAND_REGION_0_CHANNEL_LIST)/sizeof(UCHAR);
-				pChannelList = A_BAND_REGION_0_CHANNEL_LIST;
-				break;
-			case REGION_1_A_BAND:
-				num = sizeof(A_BAND_REGION_1_CHANNEL_LIST)/sizeof(UCHAR);
-				pChannelList = A_BAND_REGION_1_CHANNEL_LIST;
-				break;
-			case REGION_2_A_BAND:
-				num = sizeof(A_BAND_REGION_2_CHANNEL_LIST)/sizeof(UCHAR);
-				pChannelList = A_BAND_REGION_2_CHANNEL_LIST;
-				break;
-			case REGION_3_A_BAND:
-				num = sizeof(A_BAND_REGION_3_CHANNEL_LIST)/sizeof(UCHAR);
-				pChannelList = A_BAND_REGION_3_CHANNEL_LIST;
-				break;
-			case REGION_4_A_BAND:
-				num = sizeof(A_BAND_REGION_4_CHANNEL_LIST)/sizeof(UCHAR);
-				pChannelList = A_BAND_REGION_4_CHANNEL_LIST;
-				break;
-			case REGION_5_A_BAND:
-				num = sizeof(A_BAND_REGION_5_CHANNEL_LIST)/sizeof(UCHAR);
-				pChannelList = A_BAND_REGION_5_CHANNEL_LIST;
-				break;
-			case REGION_6_A_BAND:
-				num = sizeof(A_BAND_REGION_6_CHANNEL_LIST)/sizeof(UCHAR);
-				pChannelList = A_BAND_REGION_6_CHANNEL_LIST;
-				break;
-			case REGION_7_A_BAND:
-				num = sizeof(A_BAND_REGION_7_CHANNEL_LIST)/sizeof(UCHAR);
-				pChannelList = A_BAND_REGION_7_CHANNEL_LIST;
-				break;
-			case REGION_8_A_BAND:
-				num = sizeof(A_BAND_REGION_8_CHANNEL_LIST)/sizeof(UCHAR);
-				pChannelList = A_BAND_REGION_8_CHANNEL_LIST;
-				break;
-			case REGION_9_A_BAND:
-				num = sizeof(A_BAND_REGION_9_CHANNEL_LIST)/sizeof(UCHAR);
-				pChannelList = A_BAND_REGION_9_CHANNEL_LIST;
-				break;
-
-			case REGION_10_A_BAND:
-				num = sizeof(A_BAND_REGION_10_CHANNEL_LIST)/sizeof(UCHAR);
-				pChannelList = A_BAND_REGION_10_CHANNEL_LIST;
-				break;
-
-			case REGION_11_A_BAND:
-				num = sizeof(A_BAND_REGION_11_CHANNEL_LIST)/sizeof(UCHAR);
-				pChannelList = A_BAND_REGION_11_CHANNEL_LIST;
-				break;
-
-			default:            // Error. should never happen
-				DBGPRINT(RT_DEBUG_WARN,("countryregion=%d not support", pAd->CommonCfg.CountryRegionForABand));
-				break;
-		}
-
-		if (num != 0)
-		{
-			UCHAR RadarCh[15]={52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140};
-			for (i=0; i<num; i++)
-			{
-				for (j=0; j<MAX_NUM_OF_CHANNELS; j++)
-				{
-					if (pChannelList[i] == pAd->TxPower[j].Channel)
-						NdisMoveMemory(&pAd->ChannelList[index+i], &pAd->TxPower[j], sizeof(CHANNEL_TX_POWER));
-					}
-				for (j=0; j<15; j++)
-				{
-					if (pChannelList[i] == RadarCh[j])
-						pAd->ChannelList[index+i].DfsReq = TRUE;
-				}
-				pAd->ChannelList[index+i].MaxTxPwr = 20;
-			}
-			index += num;
-		}
-	}
-
-	pAd->ChannelListNum = index;
-	DBGPRINT(RT_DEBUG_TRACE,("country code=%d/%d, RFIC=%d, PHY mode=%d, support %d channels\n",
-		pAd->CommonCfg.CountryRegion, pAd->CommonCfg.CountryRegionForABand, pAd->RfIcType, pAd->CommonCfg.PhyMode, pAd->ChannelListNum));
-#ifdef DBG
-	for (i=0;i<pAd->ChannelListNum;i++)
-	{
-		DBGPRINT_RAW(RT_DEBUG_TRACE,("BuildChannel # %d :: Pwr0 = %d, Pwr1 =%d, \n ", pAd->ChannelList[i].Channel, pAd->ChannelList[i].Power, pAd->ChannelList[i].Power2));
-	}
-#endif
-}
-
-/*
-	==========================================================================
-	Description:
-		This routine return the first channel number according to the country
-		code selection and RF IC selection (signal band or dual band). It is called
-		whenever driver need to start a site survey of all supported channels.
-	Return:
-		ch - the first channel number of current country code setting
-
-	IRQL = PASSIVE_LEVEL
-
-	==========================================================================
- */
-UCHAR FirstChannel(
-	IN PRTMP_ADAPTER pAd)
-{
-	return pAd->ChannelList[0].Channel;
-}
-
-/*
-	==========================================================================
-	Description:
-		This routine returns the next channel number. This routine is called
-		during driver need to start a site survey of all supported channels.
-	Return:
-		next_channel - the next channel number valid in current country code setting.
-	Note:
-		return 0 if no more next channel
-	==========================================================================
- */
-UCHAR NextChannel(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR channel)
-{
-	int i;
-	UCHAR next_channel = 0;
-
-	for (i = 0; i < (pAd->ChannelListNum - 1); i++)
-		if (channel == pAd->ChannelList[i].Channel)
-		{
-			next_channel = pAd->ChannelList[i+1].Channel;
-			break;
-	}
-	return next_channel;
-}
-
-/*
-	==========================================================================
-	Description:
-		This routine is for Cisco Compatible Extensions 2.X
-		Spec31. AP Control of Client Transmit Power
-	Return:
-		None
-	Note:
-	   Required by Aironet dBm(mW)
-		   0dBm(1mW),   1dBm(5mW), 13dBm(20mW), 15dBm(30mW),
-		  17dBm(50mw), 20dBm(100mW)
-
-	   We supported
-		   3dBm(Lowest), 6dBm(10%), 9dBm(25%), 12dBm(50%),
-		  14dBm(75%),   15dBm(100%)
-
-		The client station's actual transmit power shall be within +/- 5dB of
-		the minimum value or next lower value.
-	==========================================================================
- */
-VOID ChangeToCellPowerLimit(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR         AironetCellPowerLimit)
-{
-	//valud 0xFF means that hasn't found power limit information
-	//from the AP's Beacon/Probe response.
-	if (AironetCellPowerLimit == 0xFF)
-		return;
-
-	if (AironetCellPowerLimit < 6) //Used Lowest Power Percentage.
-		pAd->CommonCfg.TxPowerPercentage = 6;
-	else if (AironetCellPowerLimit < 9)
-		pAd->CommonCfg.TxPowerPercentage = 10;
-	else if (AironetCellPowerLimit < 12)
-		pAd->CommonCfg.TxPowerPercentage = 25;
-	else if (AironetCellPowerLimit < 14)
-		pAd->CommonCfg.TxPowerPercentage = 50;
-	else if (AironetCellPowerLimit < 15)
-		pAd->CommonCfg.TxPowerPercentage = 75;
-	else
-		pAd->CommonCfg.TxPowerPercentage = 100; //else used maximum
-
-	if (pAd->CommonCfg.TxPowerPercentage > pAd->CommonCfg.TxPowerDefault)
-		pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault;
-
-}
-
-CHAR	ConvertToRssi(
-	IN PRTMP_ADAPTER pAd,
-	IN	CHAR			Rssi,
-	IN  UCHAR   RssiNumber)
-{
-	UCHAR	RssiOffset, LNAGain;
-
-	// Rssi equals to zero should be an invalid value
-	if (Rssi == 0)
-		return -99;
-
-	LNAGain = GET_LNA_GAIN(pAd);
-    if (pAd->LatchRfRegs.Channel > 14)
-    {
-        if (RssiNumber == 0)
-			RssiOffset = pAd->ARssiOffset0;
-		else if (RssiNumber == 1)
-			RssiOffset = pAd->ARssiOffset1;
-		else
-			RssiOffset = pAd->ARssiOffset2;
-    }
-    else
-    {
-        if (RssiNumber == 0)
-			RssiOffset = pAd->BGRssiOffset0;
-		else if (RssiNumber == 1)
-			RssiOffset = pAd->BGRssiOffset1;
-		else
-			RssiOffset = pAd->BGRssiOffset2;
-    }
-
-    return (-12 - RssiOffset - LNAGain - Rssi);
-}
-
-/*
-	==========================================================================
-	Description:
-		Scan next channel
-	==========================================================================
- */
-VOID ScanNextChannel(
-	IN PRTMP_ADAPTER pAd)
-{
-	HEADER_802_11   Hdr80211;
-	PUCHAR          pOutBuffer = NULL;
-	NDIS_STATUS     NStatus;
-	ULONG           FrameLen = 0;
-	UCHAR           SsidLen = 0, ScanType = pAd->MlmeAux.ScanType, BBPValue = 0;
-#ifdef CONFIG_STA_SUPPORT
-	USHORT          Status;
-	PHEADER_802_11  pHdr80211;
-#endif // CONFIG_STA_SUPPORT //
-	UINT			ScanTimeIn5gChannel = SHORT_CHANNEL_TIME;
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if (MONITOR_ON(pAd))
-			return;
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef RALINK_ATE
-	// Nothing to do in ATE mode.
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-	if (pAd->MlmeAux.Channel == 0)
-	{
-		if ((pAd->CommonCfg.BBPCurrentBW == BW_40)
-#ifdef CONFIG_STA_SUPPORT
-			&& (INFRA_ON(pAd)
-				|| (pAd->OpMode == OPMODE_AP))
-#endif // CONFIG_STA_SUPPORT //
-			)
-		{
-			AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
-			AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
-			BBPValue &= (~0x18);
-			BBPValue |= 0x10;
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
-			DBGPRINT(RT_DEBUG_TRACE, ("SYNC - End of SCAN, restore to 40MHz channel %d, Total BSS[%02d]\n",pAd->CommonCfg.CentralChannel, pAd->ScanTab.BssNr));
-		}
-		else
-		{
-			AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
-			AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-			DBGPRINT(RT_DEBUG_TRACE, ("SYNC - End of SCAN, restore to channel %d, Total BSS[%02d]\n",pAd->CommonCfg.Channel, pAd->ScanTab.BssNr));
-		}
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			//
-			// To prevent data lost.
-			// Send an NULL data with turned PSM bit on to current associated AP before SCAN progress.
-			// Now, we need to send an NULL data with turned PSM bit off to AP, when scan progress done
-			//
-			if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) && (INFRA_ON(pAd)))
-			{
-				NStatus = MlmeAllocateMemory(pAd, (PVOID)&pOutBuffer);
-				if (NStatus	== NDIS_STATUS_SUCCESS)
-				{
-					pHdr80211 = (PHEADER_802_11) pOutBuffer;
-					MgtMacHeaderInit(pAd, pHdr80211, SUBTYPE_NULL_FUNC, 1, pAd->CommonCfg.Bssid, pAd->CommonCfg.Bssid);
-					pHdr80211->Duration = 0;
-					pHdr80211->FC.Type = BTYPE_DATA;
-					pHdr80211->FC.PwrMgmt = (pAd->StaCfg.Psm == PWR_SAVE);
-
-					// Send using priority queue
-					MiniportMMRequest(pAd, 0, pOutBuffer, sizeof(HEADER_802_11));
-					DBGPRINT(RT_DEBUG_TRACE, ("MlmeScanReqAction -- Send PSM Data frame\n"));
-					MlmeFreeMemory(pAd, pOutBuffer);
-					RTMPusecDelay(5000);
-				}
-			}
-
-			pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
-			Status = MLME_SUCCESS;
-			MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_SCAN_CONF, 2, &Status);
-		}
-#endif // CONFIG_STA_SUPPORT //
-
-
-		RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
-	}
-#ifdef RT2870
-#ifdef CONFIG_STA_SUPPORT
-	else if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST) && (pAd->OpMode == OPMODE_STA))
-	{
-		pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
-		MlmeCntlConfirm(pAd, MT2_SCAN_CONF, MLME_FAIL_NO_RESOURCE);
-	}
-#endif // CONFIG_STA_SUPPORT //
-#endif // RT2870 //
-	else
-	{
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-		// BBP and RF are not accessible in PS mode, we has to wake them up first
-		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
-			AsicForceWakeup(pAd, TRUE);
-
-			// leave PSM during scanning. otherwise we may lost ProbeRsp & BEACON
-			if (pAd->StaCfg.Psm == PWR_SAVE)
-				MlmeSetPsmBit(pAd, PWR_ACTIVE);
-		}
-#endif // CONFIG_STA_SUPPORT //
-
-		AsicSwitchChannel(pAd, pAd->MlmeAux.Channel, TRUE);
-		AsicLockChannel(pAd, pAd->MlmeAux.Channel);
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			if (pAd->MlmeAux.Channel > 14)
-			{
-				if ((pAd->CommonCfg.bIEEE80211H == 1) && RadarChannelCheck(pAd, pAd->MlmeAux.Channel))
-				{
-					ScanType = SCAN_PASSIVE;
-					ScanTimeIn5gChannel = MIN_CHANNEL_TIME;
-				}
-			}
-
-#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier
-			// carrier detection
-			if (pAd->CommonCfg.CarrierDetect.Enable == TRUE)
-			{
-				ScanType = SCAN_PASSIVE;
-				ScanTimeIn5gChannel = MIN_CHANNEL_TIME;
-			}
-#endif // CARRIER_DETECTION_SUPPORT //
-		}
-
-#endif // CONFIG_STA_SUPPORT //
-
-		//Global country domain(ch1-11:active scan, ch12-14 passive scan)
-		if ((pAd->MlmeAux.Channel <= 14) && (pAd->MlmeAux.Channel >= 12) && ((pAd->CommonCfg.CountryRegion & 0x7f) == REGION_31_BG_BAND))
-		{
-			ScanType = SCAN_PASSIVE;
-		}
-
-		// We need to shorten active scan time in order for WZC connect issue
-		// Chnage the channel scan time for CISCO stuff based on its IAPP announcement
-		if (ScanType == FAST_SCAN_ACTIVE)
-			RTMPSetTimer(&pAd->MlmeAux.ScanTimer, FAST_ACTIVE_SCAN_TIME);
-#ifdef CONFIG_STA_SUPPORT
-		else if (((ScanType == SCAN_CISCO_ACTIVE) ||
-				(ScanType == SCAN_CISCO_PASSIVE) ||
-				(ScanType == SCAN_CISCO_CHANNEL_LOAD) ||
-				(ScanType == SCAN_CISCO_NOISE)) && (pAd->OpMode == OPMODE_STA))
-		{
-			if (pAd->StaCfg.CCXScanTime < 25)
-				RTMPSetTimer(&pAd->MlmeAux.ScanTimer, pAd->StaCfg.CCXScanTime * 2);
-			else
-				RTMPSetTimer(&pAd->MlmeAux.ScanTimer, pAd->StaCfg.CCXScanTime);
-		}
-#endif // CONFIG_STA_SUPPORT //
-		else // must be SCAN_PASSIVE or SCAN_ACTIVE
-		{
-			if ((pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED)
-#ifdef DOT11_N_SUPPORT
-				|| (pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11AGN_MIXED)
-#endif // DOT11_N_SUPPORT //
-			)
-			{
-				if (pAd->MlmeAux.Channel > 14)
-					RTMPSetTimer(&pAd->MlmeAux.ScanTimer, ScanTimeIn5gChannel);
-				else
-				RTMPSetTimer(&pAd->MlmeAux.ScanTimer, MIN_CHANNEL_TIME);
-			}
-			else
-				RTMPSetTimer(&pAd->MlmeAux.ScanTimer, MAX_CHANNEL_TIME);
-		}
-
-		if ((ScanType == SCAN_ACTIVE) || (ScanType == FAST_SCAN_ACTIVE) ||
-			(ScanType == SCAN_CISCO_ACTIVE))
-		{
-			NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-			if (NStatus != NDIS_STATUS_SUCCESS)
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("SYNC - ScanNextChannel() allocate memory fail\n"));
-#ifdef CONFIG_STA_SUPPORT
-				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				{
-					pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
-					Status = MLME_FAIL_NO_RESOURCE;
-					MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_SCAN_CONF, 2, &Status);
-				}
-#endif // CONFIG_STA_SUPPORT //
-
-				return;
-			}
-
-			// There is no need to send broadcast probe request if active scan is in effect.
-			if ((ScanType == SCAN_ACTIVE) || (ScanType == FAST_SCAN_ACTIVE)
-				)
-				SsidLen = pAd->MlmeAux.SsidLen;
-			else
-				SsidLen = 0;
-
-			MgtMacHeaderInit(pAd, &Hdr80211, SUBTYPE_PROBE_REQ, 0, BROADCAST_ADDR, BROADCAST_ADDR);
-			MakeOutgoingFrame(pOutBuffer,               &FrameLen,
-							  sizeof(HEADER_802_11),    &Hdr80211,
-							  1,                        &SsidIe,
-							  1,                        &SsidLen,
-							  SsidLen,			        pAd->MlmeAux.Ssid,
-							  1,                        &SupRateIe,
-							  1,                        &pAd->CommonCfg.SupRateLen,
-							  pAd->CommonCfg.SupRateLen,  pAd->CommonCfg.SupRate,
-							  END_OF_ARGS);
-
-			if (pAd->CommonCfg.ExtRateLen)
-			{
-				ULONG Tmp;
-				MakeOutgoingFrame(pOutBuffer + FrameLen,            &Tmp,
-								  1,                                &ExtRateIe,
-								  1,                                &pAd->CommonCfg.ExtRateLen,
-								  pAd->CommonCfg.ExtRateLen,          pAd->CommonCfg.ExtRate,
-								  END_OF_ARGS);
-				FrameLen += Tmp;
-			}
-
-#ifdef DOT11_N_SUPPORT
-			if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
-			{
-				ULONG	Tmp;
-				UCHAR	HtLen;
-				UCHAR	BROADCOM[4] = {0x0, 0x90, 0x4c, 0x33};
-#ifdef RT_BIG_ENDIAN
-				HT_CAPABILITY_IE HtCapabilityTmp;
-#endif
-				if (pAd->bBroadComHT == TRUE)
-				{
-					HtLen = pAd->MlmeAux.HtCapabilityLen + 4;
-#ifdef RT_BIG_ENDIAN
-					NdisMoveMemory(&HtCapabilityTmp, &pAd->MlmeAux.HtCapability, SIZE_HT_CAP_IE);
-					*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
-					*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
-
-					MakeOutgoingFrame(pOutBuffer + FrameLen,          &Tmp,
-									1,                                &WpaIe,
-									1,                                &HtLen,
-									4,                                &BROADCOM[0],
-									pAd->MlmeAux.HtCapabilityLen,     &HtCapabilityTmp,
-									END_OF_ARGS);
-#else
-					MakeOutgoingFrame(pOutBuffer + FrameLen,          &Tmp,
-									1,                                &WpaIe,
-									1,                                &HtLen,
-									4,                                &BROADCOM[0],
-									pAd->MlmeAux.HtCapabilityLen,     &pAd->MlmeAux.HtCapability,
-									END_OF_ARGS);
-#endif // RT_BIG_ENDIAN //
-				}
-				else
-				{
-					HtLen = pAd->MlmeAux.HtCapabilityLen;
-#ifdef RT_BIG_ENDIAN
-					NdisMoveMemory(&HtCapabilityTmp, &pAd->CommonCfg.HtCapability, SIZE_HT_CAP_IE);
-					*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
-					*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
-
-					MakeOutgoingFrame(pOutBuffer + FrameLen,          &Tmp,
-									1,                                &HtCapIe,
-									1,                                &HtLen,
-									HtLen,                            &HtCapabilityTmp,
-									END_OF_ARGS);
-#else
-					MakeOutgoingFrame(pOutBuffer + FrameLen,          &Tmp,
-									1,                                &HtCapIe,
-									1,                                &HtLen,
-									HtLen,                            &pAd->CommonCfg.HtCapability,
-									END_OF_ARGS);
-#endif // RT_BIG_ENDIAN //
-				}
-				FrameLen += Tmp;
-
-#ifdef DOT11N_DRAFT3
-				if (pAd->CommonCfg.BACapability.field.b2040CoexistScanSup == 1)
-				{
-					ULONG		Tmp;
-					HtLen = 1;
-					MakeOutgoingFrame(pOutBuffer + FrameLen,            &Tmp,
-									  1,					&ExtHtCapIe,
-									  1,					&HtLen,
-									  1,          			&pAd->CommonCfg.BSSCoexist2040.word,
-									  END_OF_ARGS);
-
-					FrameLen += Tmp;
-				}
-#endif // DOT11N_DRAFT3 //
-			}
-#endif // DOT11_N_SUPPORT //
-
-
-			MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-			MlmeFreeMemory(pAd, pOutBuffer);
-		}
-
-		// For SCAN_CISCO_PASSIVE, do nothing and silently wait for beacon or other probe reponse
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			pAd->Mlme.SyncMachine.CurrState = SCAN_LISTEN;
-#endif // CONFIG_STA_SUPPORT //
-
-	}
-}
-
-VOID MgtProbReqMacHeaderInit(
-	IN	PRTMP_ADAPTER	pAd,
-	IN OUT PHEADER_802_11 pHdr80211,
-	IN UCHAR SubType,
-	IN UCHAR ToDs,
-	IN PUCHAR pDA,
-	IN PUCHAR pBssid)
-{
-	NdisZeroMemory(pHdr80211, sizeof(HEADER_802_11));
-
-	pHdr80211->FC.Type = BTYPE_MGMT;
-	pHdr80211->FC.SubType = SubType;
-	if (SubType == SUBTYPE_ACK)
-		pHdr80211->FC.Type = BTYPE_CNTL;
-	pHdr80211->FC.ToDs = ToDs;
-	COPY_MAC_ADDR(pHdr80211->Addr1, pDA);
-	COPY_MAC_ADDR(pHdr80211->Addr2, pAd->CurrentAddress);
-	COPY_MAC_ADDR(pHdr80211->Addr3, pBssid);
-}
-
-
+#include "../../rt2870/common/cmm_sync.c"
diff --git a/drivers/staging/rt3070/common/cmm_wpa.c b/drivers/staging/rt3070/common/cmm_wpa.c
index 81c332ac252..6483d329286 100644
--- a/drivers/staging/rt3070/common/cmm_wpa.c
+++ b/drivers/staging/rt3070/common/cmm_wpa.c
@@ -1,1606 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	wpa.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Jan	Lee		03-07-22		Initial
-	Paul Lin	03-11-28		Modify for supplicant
-*/
-#include "../rt_config.h"
-// WPA OUI
-UCHAR		OUI_WPA_NONE_AKM[4]		= {0x00, 0x50, 0xF2, 0x00};
-UCHAR       OUI_WPA_VERSION[4]      = {0x00, 0x50, 0xF2, 0x01};
-UCHAR       OUI_WPA_TKIP[4]     = {0x00, 0x50, 0xF2, 0x02};
-UCHAR       OUI_WPA_CCMP[4]     = {0x00, 0x50, 0xF2, 0x04};
-UCHAR       OUI_WPA_8021X_AKM[4]	= {0x00, 0x50, 0xF2, 0x01};
-UCHAR       OUI_WPA_PSK_AKM[4]      = {0x00, 0x50, 0xF2, 0x02};
-// WPA2 OUI
-UCHAR       OUI_WPA2_WEP40[4]   = {0x00, 0x0F, 0xAC, 0x01};
-UCHAR       OUI_WPA2_TKIP[4]        = {0x00, 0x0F, 0xAC, 0x02};
-UCHAR       OUI_WPA2_CCMP[4]        = {0x00, 0x0F, 0xAC, 0x04};
-UCHAR       OUI_WPA2_8021X_AKM[4]   = {0x00, 0x0F, 0xAC, 0x01};
-UCHAR       OUI_WPA2_PSK_AKM[4]   	= {0x00, 0x0F, 0xAC, 0x02};
-// MSA OUI
-UCHAR   	OUI_MSA_8021X_AKM[4]    = {0x00, 0x0F, 0xAC, 0x05};		// Not yet final - IEEE 802.11s-D1.06
-UCHAR   	OUI_MSA_PSK_AKM[4]   	= {0x00, 0x0F, 0xAC, 0x06};		// Not yet final - IEEE 802.11s-D1.06
-
-/*
-	========================================================================
-
-	Routine Description:
-		The pseudo-random function(PRF) that hashes various inputs to
-		derive a pseudo-random value. To add liveness to the pseudo-random
-		value, a nonce should be one of the inputs.
-
-		It is used to generate PTK, GTK or some specific random value.
-
-	Arguments:
-		UCHAR	*key,		-	the key material for HMAC_SHA1 use
-		INT		key_len		-	the length of key
-		UCHAR	*prefix		-	a prefix label
-		INT		prefix_len	-	the length of the label
-		UCHAR	*data		-	a specific data with variable length
-		INT		data_len	-	the length of a specific data
-		INT		len			-	the output lenght
-
-	Return Value:
-		UCHAR	*output		-	the calculated result
-
-	Note:
-		802.11i-2004	Annex H.3
-
-	========================================================================
-*/
-VOID	PRF(
-	IN	UCHAR	*key,
-	IN	INT		key_len,
-	IN	UCHAR	*prefix,
-	IN	INT		prefix_len,
-	IN	UCHAR	*data,
-	IN	INT		data_len,
-	OUT	UCHAR	*output,
-	IN	INT		len)
-{
-	INT		i;
-    UCHAR   *input;
-	INT		currentindex = 0;
-	INT		total_len;
-
-	// Allocate memory for input
-	os_alloc_mem(NULL, (PUCHAR *)&input, 1024);
-
-    if (input == NULL)
-    {
-        DBGPRINT(RT_DEBUG_ERROR, ("!!!PRF: no memory!!!\n"));
-        return;
-    }
-
-	// Generate concatenation input
-	NdisMoveMemory(input, prefix, prefix_len);
-
-	// Concatenate a single octet containing 0
-	input[prefix_len] =	0;
-
-	// Concatenate specific data
-	NdisMoveMemory(&input[prefix_len + 1], data, data_len);
-	total_len =	prefix_len + 1 + data_len;
-
-	// Concatenate a single octet containing 0
-	// This octet shall be update later
-	input[total_len] = 0;
-	total_len++;
-
-	// Iterate to calculate the result by hmac-sha-1
-	// Then concatenate to last result
-	for	(i = 0;	i <	(len + 19) / 20; i++)
-	{
-		HMAC_SHA1(input, total_len,	key, key_len, &output[currentindex]);
-		currentindex +=	20;
-
-		// update the last octet
-		input[total_len - 1]++;
-	}
-    os_free_mem(NULL, input);
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		It utilizes PRF-384 or PRF-512 to derive session-specific keys from a PMK.
-		It shall be called by 4-way handshake processing.
-
-	Arguments:
-		pAd 	-	pointer to our pAdapter context
-		PMK		-	pointer to PMK
-		ANonce	-	pointer to ANonce
-		AA		-	pointer to Authenticator Address
-		SNonce	-	pointer to SNonce
-		SA		-	pointer to Supplicant Address
-		len		-	indicate the length of PTK (octet)
-
-	Return Value:
-		Output		pointer to the PTK
-
-	Note:
-		Refer to IEEE 802.11i-2004 8.5.1.2
-
-	========================================================================
-*/
-VOID WpaCountPTK(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR	*PMK,
-	IN	UCHAR	*ANonce,
-	IN	UCHAR	*AA,
-	IN	UCHAR	*SNonce,
-	IN	UCHAR	*SA,
-	OUT	UCHAR	*output,
-	IN	UINT	len)
-{
-	UCHAR	concatenation[76];
-	UINT	CurrPos = 0;
-	UCHAR	temp[32];
-	UCHAR	Prefix[] = {'P', 'a', 'i', 'r', 'w', 'i', 's', 'e', ' ', 'k', 'e', 'y', ' ',
-						'e', 'x', 'p', 'a', 'n', 's', 'i', 'o', 'n'};
-
-	// initiate the concatenation input
-	NdisZeroMemory(temp, sizeof(temp));
-	NdisZeroMemory(concatenation, 76);
-
-	// Get smaller address
-	if (RTMPCompareMemory(SA, AA, 6) == 1)
-		NdisMoveMemory(concatenation, AA, 6);
-	else
-		NdisMoveMemory(concatenation, SA, 6);
-	CurrPos += 6;
-
-	// Get larger address
-	if (RTMPCompareMemory(SA, AA, 6) == 1)
-		NdisMoveMemory(&concatenation[CurrPos], SA, 6);
-	else
-		NdisMoveMemory(&concatenation[CurrPos], AA, 6);
-
-	// store the larger mac address for backward compatible of
-	// ralink proprietary STA-key issue
-	NdisMoveMemory(temp, &concatenation[CurrPos], MAC_ADDR_LEN);
-	CurrPos += 6;
-
-	// Get smaller Nonce
-	if (RTMPCompareMemory(ANonce, SNonce, 32) == 0)
-		NdisMoveMemory(&concatenation[CurrPos], temp, 32);	// patch for ralink proprietary STA-key issue
-	else if (RTMPCompareMemory(ANonce, SNonce, 32) == 1)
-		NdisMoveMemory(&concatenation[CurrPos], SNonce, 32);
-	else
-		NdisMoveMemory(&concatenation[CurrPos], ANonce, 32);
-	CurrPos += 32;
-
-	// Get larger Nonce
-	if (RTMPCompareMemory(ANonce, SNonce, 32) == 0)
-		NdisMoveMemory(&concatenation[CurrPos], temp, 32);	// patch for ralink proprietary STA-key issue
-	else if (RTMPCompareMemory(ANonce, SNonce, 32) == 1)
-		NdisMoveMemory(&concatenation[CurrPos], ANonce, 32);
-	else
-		NdisMoveMemory(&concatenation[CurrPos], SNonce, 32);
-	CurrPos += 32;
-
-	hex_dump("concatenation=", concatenation, 76);
-
-	// Use PRF to generate PTK
-	PRF(PMK, LEN_MASTER_KEY, Prefix, 22, concatenation, 76, output, len);
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Generate random number by software.
-
-	Arguments:
-		pAd		-	pointer to our pAdapter context
-		macAddr	-	pointer to local MAC address
-
-	Return Value:
-
-	Note:
-		802.1ii-2004  Annex H.5
-
-	========================================================================
-*/
-VOID	GenRandom(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			*macAddr,
-	OUT	UCHAR			*random)
-{
-	INT		i, curr;
-	UCHAR	local[80], KeyCounter[32];
-	UCHAR	result[80];
-	ULONG	CurrentTime;
-	UCHAR	prefix[] = {'I', 'n', 'i', 't', ' ', 'C', 'o', 'u', 'n', 't', 'e', 'r'};
-
-	// Zero the related information
-	NdisZeroMemory(result, 80);
-	NdisZeroMemory(local, 80);
-	NdisZeroMemory(KeyCounter, 32);
-
-	for	(i = 0;	i <	32;	i++)
-	{
-		// copy the local MAC address
-		COPY_MAC_ADDR(local, macAddr);
-		curr =	MAC_ADDR_LEN;
-
-		// concatenate the current time
-		NdisGetSystemUpTime(&CurrentTime);
-		NdisMoveMemory(&local[curr],  &CurrentTime,	sizeof(CurrentTime));
-		curr +=	sizeof(CurrentTime);
-
-		// concatenate the last result
-		NdisMoveMemory(&local[curr],  result, 32);
-		curr +=	32;
-
-		// concatenate a variable
-		NdisMoveMemory(&local[curr],  &i,  2);
-		curr +=	2;
-
-		// calculate the result
-		PRF(KeyCounter, 32, prefix,12, local, curr, result, 32);
-	}
-
-	NdisMoveMemory(random, result,	32);
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Build cipher suite in RSN-IE.
-		It only shall be called by RTMPMakeRSNIE.
-
-	Arguments:
-		pAd			-	pointer to our pAdapter context
-    	ElementID	-	indicate the WPA1 or WPA2
-    	WepStatus	-	indicate the encryption type
-		bMixCipher	-	a boolean to indicate the pairwise cipher and group
-						cipher are the same or not
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-static VOID RTMPInsertRsnIeCipher(
-	IN  PRTMP_ADAPTER   pAd,
-	IN	UCHAR			ElementID,
-	IN	UINT			WepStatus,
-	IN	BOOLEAN			bMixCipher,
-	IN	UCHAR			FlexibleCipher,
-	OUT	PUCHAR			pRsnIe,
-	OUT	UCHAR			*rsn_len)
-{
-	UCHAR	PairwiseCnt;
-
-	*rsn_len = 0;
-
-	// decide WPA2 or WPA1
-	if (ElementID == Wpa2Ie)
-	{
-		RSNIE2	*pRsnie_cipher = (RSNIE2*)pRsnIe;
-
-		// Assign the verson as 1
-		pRsnie_cipher->version = 1;
-
-        switch (WepStatus)
-        {
-        	// TKIP mode
-            case Ndis802_11Encryption2Enabled:
-                NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA2_TKIP, 4);
-                pRsnie_cipher->ucount = 1;
-                NdisMoveMemory(pRsnie_cipher->ucast[0].oui, OUI_WPA2_TKIP, 4);
-                *rsn_len = sizeof(RSNIE2);
-                break;
-
-			// AES mode
-            case Ndis802_11Encryption3Enabled:
-				if (bMixCipher)
-					NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA2_TKIP, 4);
-				else
-					NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA2_CCMP, 4);
-                pRsnie_cipher->ucount = 1;
-                NdisMoveMemory(pRsnie_cipher->ucast[0].oui, OUI_WPA2_CCMP, 4);
-                *rsn_len = sizeof(RSNIE2);
-                break;
-
-			// TKIP-AES mix mode
-            case Ndis802_11Encryption4Enabled:
-                NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA2_TKIP, 4);
-
-				PairwiseCnt = 1;
-				// Insert WPA2 TKIP as the first pairwise cipher
-				if (MIX_CIPHER_WPA2_TKIP_ON(FlexibleCipher))
-				{
-                	NdisMoveMemory(pRsnie_cipher->ucast[0].oui, OUI_WPA2_TKIP, 4);
-					// Insert WPA2 AES as the secondary pairwise cipher
-					if (MIX_CIPHER_WPA2_AES_ON(FlexibleCipher))
-					{
-                		NdisMoveMemory(pRsnie_cipher->ucast[0].oui + 4, OUI_WPA2_CCMP, 4);
-						PairwiseCnt = 2;
-					}
-				}
-				else
-				{
-					// Insert WPA2 AES as the first pairwise cipher
-					NdisMoveMemory(pRsnie_cipher->ucast[0].oui, OUI_WPA2_CCMP, 4);
-				}
-
-                pRsnie_cipher->ucount = PairwiseCnt;
-                *rsn_len = sizeof(RSNIE2) + (4 * (PairwiseCnt - 1));
-                break;
-        }
-
-		// swap for big-endian platform
-		pRsnie_cipher->version = cpu2le16(pRsnie_cipher->version);
-	    pRsnie_cipher->ucount = cpu2le16(pRsnie_cipher->ucount);
-	}
-	else
-	{
-		RSNIE	*pRsnie_cipher = (RSNIE*)pRsnIe;
-
-		// Assign OUI and version
-		NdisMoveMemory(pRsnie_cipher->oui, OUI_WPA_VERSION, 4);
-        pRsnie_cipher->version = 1;
-
-		switch (WepStatus)
-		{
-			// TKIP mode
-            case Ndis802_11Encryption2Enabled:
-                NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA_TKIP, 4);
-                pRsnie_cipher->ucount = 1;
-                NdisMoveMemory(pRsnie_cipher->ucast[0].oui, OUI_WPA_TKIP, 4);
-                *rsn_len = sizeof(RSNIE);
-                break;
-
-			// AES mode
-            case Ndis802_11Encryption3Enabled:
-				if (bMixCipher)
-					NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA_TKIP, 4);
-				else
-					NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA_CCMP, 4);
-                pRsnie_cipher->ucount = 1;
-                NdisMoveMemory(pRsnie_cipher->ucast[0].oui, OUI_WPA_CCMP, 4);
-                *rsn_len = sizeof(RSNIE);
-                break;
-
-			// TKIP-AES mix mode
-            case Ndis802_11Encryption4Enabled:
-                NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA_TKIP, 4);
-
-				PairwiseCnt = 1;
-				// Insert WPA TKIP as the first pairwise cipher
-				if (MIX_CIPHER_WPA_TKIP_ON(FlexibleCipher))
-				{
-                	NdisMoveMemory(pRsnie_cipher->ucast[0].oui, OUI_WPA_TKIP, 4);
-					// Insert WPA AES as the secondary pairwise cipher
-					if (MIX_CIPHER_WPA_AES_ON(FlexibleCipher))
-					{
-                		NdisMoveMemory(pRsnie_cipher->ucast[0].oui + 4, OUI_WPA_CCMP, 4);
-						PairwiseCnt = 2;
-					}
-				}
-				else
-				{
-					// Insert WPA AES as the first pairwise cipher
-					NdisMoveMemory(pRsnie_cipher->ucast[0].oui, OUI_WPA_CCMP, 4);
-				}
-
-                pRsnie_cipher->ucount = PairwiseCnt;
-                *rsn_len = sizeof(RSNIE) + (4 * (PairwiseCnt - 1));
-                break;
-        }
-
-		// swap for big-endian platform
-		pRsnie_cipher->version = cpu2le16(pRsnie_cipher->version);
-	    pRsnie_cipher->ucount = cpu2le16(pRsnie_cipher->ucount);
-	}
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Build AKM suite in RSN-IE.
-		It only shall be called by RTMPMakeRSNIE.
-
-	Arguments:
-		pAd			-	pointer to our pAdapter context
-    	ElementID	-	indicate the WPA1 or WPA2
-    	AuthMode	-	indicate the authentication mode
-		apidx		-	indicate the interface index
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-static VOID RTMPInsertRsnIeAKM(
-	IN  PRTMP_ADAPTER   pAd,
-	IN	UCHAR			ElementID,
-	IN	UINT			AuthMode,
-	IN	UCHAR			apidx,
-	OUT	PUCHAR			pRsnIe,
-	OUT	UCHAR			*rsn_len)
-{
-	RSNIE_AUTH		*pRsnie_auth;
-
-	pRsnie_auth = (RSNIE_AUTH*)(pRsnIe + (*rsn_len));
-
-	// decide WPA2 or WPA1
-	if (ElementID == Wpa2Ie)
-	{
-		switch (AuthMode)
-        {
-            case Ndis802_11AuthModeWPA2:
-            case Ndis802_11AuthModeWPA1WPA2:
-                pRsnie_auth->acount = 1;
-                	NdisMoveMemory(pRsnie_auth->auth[0].oui, OUI_WPA2_8021X_AKM, 4);
-                break;
-
-            case Ndis802_11AuthModeWPA2PSK:
-            case Ndis802_11AuthModeWPA1PSKWPA2PSK:
-                pRsnie_auth->acount = 1;
-                	NdisMoveMemory(pRsnie_auth->auth[0].oui, OUI_WPA2_PSK_AKM, 4);
-                break;
-        }
-	}
-	else
-	{
-		switch (AuthMode)
-        {
-            case Ndis802_11AuthModeWPA:
-            case Ndis802_11AuthModeWPA1WPA2:
-                pRsnie_auth->acount = 1;
-                NdisMoveMemory(pRsnie_auth->auth[0].oui, OUI_WPA_8021X_AKM, 4);
-                break;
-
-            case Ndis802_11AuthModeWPAPSK:
-            case Ndis802_11AuthModeWPA1PSKWPA2PSK:
-                pRsnie_auth->acount = 1;
-                NdisMoveMemory(pRsnie_auth->auth[0].oui, OUI_WPA_PSK_AKM, 4);
-                break;
-
-			case Ndis802_11AuthModeWPANone:
-                pRsnie_auth->acount = 1;
-                NdisMoveMemory(pRsnie_auth->auth[0].oui, OUI_WPA_NONE_AKM, 4);
-                break;
-        }
-	}
-
-	pRsnie_auth->acount = cpu2le16(pRsnie_auth->acount);
-
-	(*rsn_len) += sizeof(RSNIE_AUTH);	// update current RSNIE length
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Build capability in RSN-IE.
-		It only shall be called by RTMPMakeRSNIE.
-
-	Arguments:
-		pAd			-	pointer to our pAdapter context
-    	ElementID	-	indicate the WPA1 or WPA2
-		apidx		-	indicate the interface index
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-static VOID RTMPInsertRsnIeCap(
-	IN  PRTMP_ADAPTER   pAd,
-	IN	UCHAR			ElementID,
-	IN	UCHAR			apidx,
-	OUT	PUCHAR			pRsnIe,
-	OUT	UCHAR			*rsn_len)
-{
-	RSN_CAPABILITIES    *pRSN_Cap;
-
-	// it could be ignored in WPA1 mode
-	if (ElementID == WpaIe)
-		return;
-
-	pRSN_Cap = (RSN_CAPABILITIES*)(pRsnIe + (*rsn_len));
-
-
-	pRSN_Cap->word = cpu2le16(pRSN_Cap->word);
-
-	(*rsn_len) += sizeof(RSN_CAPABILITIES);	// update current RSNIE length
-
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Build RSN IE context. It is not included element-ID and length.
-
-	Arguments:
-		pAd			-	pointer to our pAdapter context
-    	AuthMode	-	indicate the authentication mode
-    	WepStatus	-	indicate the encryption type
-		apidx		-	indicate the interface index
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-VOID RTMPMakeRSNIE(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  UINT            AuthMode,
-    IN  UINT            WepStatus,
-	IN	UCHAR			apidx)
-{
-	PUCHAR		pRsnIe = NULL;			// primary RSNIE
-	UCHAR 		*rsnielen_cur_p = 0;	// the length of the primary RSNIE
-	UCHAR		*rsnielen_ex_cur_p = 0;	// the length of the secondary RSNIE
-	UCHAR		PrimaryRsnie;
-	BOOLEAN		bMixCipher = FALSE;	// indicate the pairwise and group cipher are different
-	UCHAR		p_offset;
-	WPA_MIX_PAIR_CIPHER		FlexibleCipher = MIX_CIPHER_NOTUSE;	// it provide the more flexible cipher combination in WPA-WPA2 and TKIPAES mode
-
-	rsnielen_cur_p = NULL;
-	rsnielen_ex_cur_p = NULL;
-
-	{
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-#ifdef WPA_SUPPLICANT_SUPPORT
-			if (pAd->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
-			{
-				if (AuthMode < Ndis802_11AuthModeWPA)
-					return;
-			}
-			else
-#endif // WPA_SUPPLICANT_SUPPORT //
-			{
-				// Support WPAPSK or WPA2PSK in STA-Infra mode
-				// Support WPANone in STA-Adhoc mode
-				if ((AuthMode != Ndis802_11AuthModeWPAPSK) &&
-					(AuthMode != Ndis802_11AuthModeWPA2PSK) &&
-					(AuthMode != Ndis802_11AuthModeWPANone)
-					)
-					return;
-			}
-
-			DBGPRINT(RT_DEBUG_TRACE,("==> RTMPMakeRSNIE(STA)\n"));
-
-			// Zero RSNIE context
-			pAd->StaCfg.RSNIE_Len = 0;
-			NdisZeroMemory(pAd->StaCfg.RSN_IE, MAX_LEN_OF_RSNIE);
-
-			// Pointer to RSNIE
-			rsnielen_cur_p = &pAd->StaCfg.RSNIE_Len;
-			pRsnIe = pAd->StaCfg.RSN_IE;
-
-			bMixCipher = pAd->StaCfg.bMixCipher;
-		}
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-	// indicate primary RSNIE as WPA or WPA2
-	if ((AuthMode == Ndis802_11AuthModeWPA) ||
-		(AuthMode == Ndis802_11AuthModeWPAPSK) ||
-		(AuthMode == Ndis802_11AuthModeWPANone) ||
-		(AuthMode == Ndis802_11AuthModeWPA1WPA2) ||
-		(AuthMode == Ndis802_11AuthModeWPA1PSKWPA2PSK))
-		PrimaryRsnie = WpaIe;
-	else
-		PrimaryRsnie = Wpa2Ie;
-
-	{
-		// Build the primary RSNIE
-		// 1. insert cipher suite
-		RTMPInsertRsnIeCipher(pAd, PrimaryRsnie, WepStatus, bMixCipher, FlexibleCipher, pRsnIe, &p_offset);
-
-		// 2. insert AKM
-		RTMPInsertRsnIeAKM(pAd, PrimaryRsnie, AuthMode, apidx, pRsnIe, &p_offset);
-
-		// 3. insert capability
-		RTMPInsertRsnIeCap(pAd, PrimaryRsnie, apidx, pRsnIe, &p_offset);
-	}
-
-	// 4. update the RSNIE length
-	*rsnielen_cur_p = p_offset;
-
-	hex_dump("The primary RSNIE", pRsnIe, (*rsnielen_cur_p));
-
-
-}
-
-/*
-    ==========================================================================
-    Description:
-		Check whether the received frame is EAP frame.
-
-	Arguments:
-		pAd				-	pointer to our pAdapter context
-		pEntry			-	pointer to active entry
-		pData			-	the received frame
-		DataByteCount 	-	the received frame's length
-		FromWhichBSSID	-	indicate the interface index
-
-    Return:
-         TRUE 			-	This frame is EAP frame
-         FALSE 			-	otherwise
-    ==========================================================================
-*/
-BOOLEAN RTMPCheckWPAframe(
-    IN PRTMP_ADAPTER    pAd,
-    IN PMAC_TABLE_ENTRY	pEntry,
-    IN PUCHAR           pData,
-    IN ULONG            DataByteCount,
-	IN UCHAR			FromWhichBSSID)
-{
-	ULONG	Body_len;
-	BOOLEAN Cancelled;
-
-
-    if(DataByteCount < (LENGTH_802_1_H + LENGTH_EAPOL_H))
-        return FALSE;
-
-
-	// Skip LLC header
-    if (NdisEqualMemory(SNAP_802_1H, pData, 6) ||
-        // Cisco 1200 AP may send packet with SNAP_BRIDGE_TUNNEL
-        NdisEqualMemory(SNAP_BRIDGE_TUNNEL, pData, 6))
-    {
-        pData += 6;
-    }
-	// Skip 2-bytes EAPoL type
-    if (NdisEqualMemory(EAPOL, pData, 2))
-    {
-        pData += 2;
-    }
-    else
-        return FALSE;
-
-    switch (*(pData+1))
-    {
-        case EAPPacket:
-			Body_len = (*(pData+2)<<8) | (*(pData+3));
-            DBGPRINT(RT_DEBUG_TRACE, ("Receive EAP-Packet frame, TYPE = 0, Length = %ld\n", Body_len));
-            break;
-        case EAPOLStart:
-            DBGPRINT(RT_DEBUG_TRACE, ("Receive EAPOL-Start frame, TYPE = 1 \n"));
-			if (pEntry->EnqueueEapolStartTimerRunning != EAPOL_START_DISABLE)
-            {
-            	DBGPRINT(RT_DEBUG_TRACE, ("Cancel the EnqueueEapolStartTimerRunning \n"));
-                RTMPCancelTimer(&pEntry->EnqueueStartForPSKTimer, &Cancelled);
-                pEntry->EnqueueEapolStartTimerRunning = EAPOL_START_DISABLE;
-            }
-            break;
-        case EAPOLLogoff:
-            DBGPRINT(RT_DEBUG_TRACE, ("Receive EAPOLLogoff frame, TYPE = 2 \n"));
-            break;
-        case EAPOLKey:
-			Body_len = (*(pData+2)<<8) | (*(pData+3));
-            DBGPRINT(RT_DEBUG_TRACE, ("Receive EAPOL-Key frame, TYPE = 3, Length = %ld\n", Body_len));
-            break;
-        case EAPOLASFAlert:
-            DBGPRINT(RT_DEBUG_TRACE, ("Receive EAPOLASFAlert frame, TYPE = 4 \n"));
-            break;
-        default:
-            return FALSE;
-
-    }
-    return TRUE;
-}
-
-
-/*
-    ==========================================================================
-    Description:
-        ENCRYPT AES GTK before sending in EAPOL frame.
-        AES GTK length = 128 bit,  so fix blocks for aes-key-wrap as 2 in this function.
-        This function references to RFC 3394 for aes key wrap algorithm.
-    Return:
-    ==========================================================================
-*/
-VOID AES_GTK_KEY_WRAP(
-    IN UCHAR    *key,
-    IN UCHAR    *plaintext,
-    IN UCHAR    p_len,
-    OUT UCHAR   *ciphertext)
-{
-    UCHAR       A[8], BIN[16], BOUT[16];
-    UCHAR       R[512];
-    INT         num_blocks = p_len/8;   // unit:64bits
-    INT         i, j;
-    aes_context aesctx;
-    UCHAR       xor;
-
-    rtmp_aes_set_key(&aesctx, key, 128);
-
-    // Init IA
-    for (i = 0; i < 8; i++)
-        A[i] = 0xa6;
-
-    //Input plaintext
-    for (i = 0; i < num_blocks; i++)
-    {
-        for (j = 0 ; j < 8; j++)
-            R[8 * (i + 1) + j] = plaintext[8 * i + j];
-    }
-
-    // Key Mix
-    for (j = 0; j < 6; j++)
-    {
-        for(i = 1; i <= num_blocks; i++)
-        {
-            //phase 1
-            NdisMoveMemory(BIN, A, 8);
-            NdisMoveMemory(&BIN[8], &R[8 * i], 8);
-            rtmp_aes_encrypt(&aesctx, BIN, BOUT);
-
-            NdisMoveMemory(A, &BOUT[0], 8);
-            xor = num_blocks * j + i;
-            A[7] = BOUT[7] ^ xor;
-            NdisMoveMemory(&R[8 * i], &BOUT[8], 8);
-        }
-    }
-
-    // Output ciphertext
-    NdisMoveMemory(ciphertext, A, 8);
-
-    for (i = 1; i <= num_blocks; i++)
-    {
-        for (j = 0 ; j < 8; j++)
-            ciphertext[8 * i + j] = R[8 * i + j];
-    }
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Misc function to decrypt AES body
-
-	Arguments:
-
-	Return Value:
-
-	Note:
-		This function references to	RFC	3394 for aes key unwrap algorithm.
-
-	========================================================================
-*/
-VOID	AES_GTK_KEY_UNWRAP(
-	IN	UCHAR	*key,
-	OUT	UCHAR	*plaintext,
-	IN	UCHAR    c_len,
-	IN	UCHAR	*ciphertext)
-
-{
-	UCHAR       A[8], BIN[16], BOUT[16];
-	UCHAR       xor;
-	INT         i, j;
-	aes_context aesctx;
-	UCHAR       *R;
-	INT         num_blocks = c_len/8;	// unit:64bits
-
-
-	os_alloc_mem(NULL, (PUCHAR *)&R, 512);
-
-	if (R == NULL)
-    {
-        DBGPRINT(RT_DEBUG_ERROR, ("!!!AES_GTK_KEY_UNWRAP: no memory!!!\n"));
-        return;
-    } /* End of if */
-
-	// Initialize
-	NdisMoveMemory(A, ciphertext, 8);
-	//Input plaintext
-	for(i = 0; i < (c_len-8); i++)
-	{
-		R[ i] = ciphertext[i + 8];
-	}
-
-	rtmp_aes_set_key(&aesctx, key, 128);
-
-	for(j = 5; j >= 0; j--)
-	{
-		for(i = (num_blocks-1); i > 0; i--)
-		{
-			xor = (num_blocks -1 )* j + i;
-			NdisMoveMemory(BIN, A, 8);
-			BIN[7] = A[7] ^ xor;
-			NdisMoveMemory(&BIN[8], &R[(i-1)*8], 8);
-			rtmp_aes_decrypt(&aesctx, BIN, BOUT);
-			NdisMoveMemory(A, &BOUT[0], 8);
-			NdisMoveMemory(&R[(i-1)*8], &BOUT[8], 8);
-		}
-	}
-
-	// OUTPUT
-	for(i = 0; i < c_len; i++)
-	{
-		plaintext[i] = R[i];
-	}
-
-
-	os_free_mem(NULL, R);
-}
-
-/*
-    ==========================================================================
-    Description:
-		Report the EAP message type
-
-	Arguments:
-		msg		-	EAPOL_PAIR_MSG_1
-					EAPOL_PAIR_MSG_2
-					EAPOL_PAIR_MSG_3
-					EAPOL_PAIR_MSG_4
-					EAPOL_GROUP_MSG_1
-					EAPOL_GROUP_MSG_2
-
-    Return:
-         message type string
-
-    ==========================================================================
-*/
-CHAR *GetEapolMsgType(CHAR msg)
-{
-    if(msg == EAPOL_PAIR_MSG_1)
-        return "Pairwise Message 1";
-    else if(msg == EAPOL_PAIR_MSG_2)
-        return "Pairwise Message 2";
-	else if(msg == EAPOL_PAIR_MSG_3)
-        return "Pairwise Message 3";
-	else if(msg == EAPOL_PAIR_MSG_4)
-        return "Pairwise Message 4";
-	else if(msg == EAPOL_GROUP_MSG_1)
-        return "Group Message 1";
-	else if(msg == EAPOL_GROUP_MSG_2)
-        return "Group Message 2";
-    else
-    	return "Invalid Message";
-}
-
-
-/*
-    ========================================================================
-
-    Routine Description:
-    Check Sanity RSN IE of EAPoL message
-
-    Arguments:
-
-    Return Value:
-
-
-    ========================================================================
-*/
-BOOLEAN RTMPCheckRSNIE(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pData,
-	IN  UCHAR           DataLen,
-	IN  MAC_TABLE_ENTRY *pEntry,
-	OUT	UCHAR			*Offset)
-{
-	PUCHAR              pVIE;
-	UCHAR               len;
-	PEID_STRUCT         pEid;
-	BOOLEAN				result = FALSE;
-
-	pVIE = pData;
-	len	 = DataLen;
-	*Offset = 0;
-
-	while (len > sizeof(RSNIE2))
-	{
-		pEid = (PEID_STRUCT) pVIE;
-		// WPA RSN IE
-		if ((pEid->Eid == IE_WPA) && (NdisEqualMemory(pEid->Octet, WPA_OUI, 4)))
-		{
-			if ((pEntry->AuthMode == Ndis802_11AuthModeWPA || pEntry->AuthMode == Ndis802_11AuthModeWPAPSK) &&
-				(NdisEqualMemory(pVIE, pEntry->RSN_IE, pEntry->RSNIE_Len)) &&
-				(pEntry->RSNIE_Len == (pEid->Len + 2)))
-			{
-					result = TRUE;
-			}
-
-			*Offset += (pEid->Len + 2);
-		}
-		// WPA2 RSN IE
-		else if ((pEid->Eid == IE_RSN) && (NdisEqualMemory(pEid->Octet + 2, RSN_OUI, 3)))
-		{
-			if ((pEntry->AuthMode == Ndis802_11AuthModeWPA2 || pEntry->AuthMode == Ndis802_11AuthModeWPA2PSK) &&
-				(NdisEqualMemory(pVIE, pEntry->RSN_IE, pEntry->RSNIE_Len)) &&
-				(pEntry->RSNIE_Len == (pEid->Len + 2))/* ToDo-AlbertY for mesh*/)
-			{
-					result = TRUE;
-			}
-
-			*Offset += (pEid->Len + 2);
-		}
-		else
-		{
-			break;
-		}
-
-		pVIE += (pEid->Len + 2);
-		len  -= (pEid->Len + 2);
-	}
-
-
-	return result;
-
-}
-
-
-/*
-    ========================================================================
-
-    Routine Description:
-    Parse KEYDATA field.  KEYDATA[] May contain 2 RSN IE and optionally GTK.
-    GTK  is encaptulated in KDE format at  p.83 802.11i D10
-
-    Arguments:
-
-    Return Value:
-
-    Note:
-        802.11i D10
-
-    ========================================================================
-*/
-BOOLEAN RTMPParseEapolKeyData(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pKeyData,
-	IN  UCHAR           KeyDataLen,
-	IN	UCHAR			GroupKeyIndex,
-	IN	UCHAR			MsgType,
-	IN	BOOLEAN			bWPA2,
-	IN  MAC_TABLE_ENTRY *pEntry)
-{
-    PKDE_ENCAP          pKDE = NULL;
-    PUCHAR              pMyKeyData = pKeyData;
-    UCHAR               KeyDataLength = KeyDataLen;
-    UCHAR               GTKLEN = 0;
-	UCHAR				DefaultIdx = 0;
-	UCHAR				skip_offset;
-
-	// Verify The RSN IE contained in pairewise_msg_2 && pairewise_msg_3 and skip it
-	if (MsgType == EAPOL_PAIR_MSG_2 || MsgType == EAPOL_PAIR_MSG_3)
-    {
-		// Check RSN IE whether it is WPA2/WPA2PSK
-		if (!RTMPCheckRSNIE(pAd, pKeyData, KeyDataLen, pEntry, &skip_offset))
-		{
-			// send wireless event - for RSN IE different
-			if (pAd->CommonCfg.bWirelessEvent)
-				RTMPSendWirelessEvent(pAd, IW_RSNIE_DIFF_EVENT_FLAG, pEntry->Addr, pEntry->apidx, 0);
-
-        	DBGPRINT(RT_DEBUG_ERROR, ("RSN_IE Different in msg %d of 4-way handshake!\n", MsgType));
-			hex_dump("Receive RSN_IE ", pKeyData, KeyDataLen);
-			hex_dump("Desired RSN_IE ", pEntry->RSN_IE, pEntry->RSNIE_Len);
-
-			return FALSE;
-    	}
-    	else
-		{
-			if (bWPA2 && MsgType == EAPOL_PAIR_MSG_3)
-			{
-				// skip RSN IE
-				pMyKeyData += skip_offset;
-				KeyDataLength -= skip_offset;
-				DBGPRINT(RT_DEBUG_TRACE, ("RTMPParseEapolKeyData ==> WPA2/WPA2PSK RSN IE matched in Msg 3, Length(%d) \n", skip_offset));
-			}
-			else
-				return TRUE;
-		}
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE,("RTMPParseEapolKeyData ==> KeyDataLength %d without RSN_IE \n", KeyDataLength));
-
-	// Parse EKD format in pairwise_msg_3_WPA2 && group_msg_1_WPA2
-	if (bWPA2 && (MsgType == EAPOL_PAIR_MSG_3 || MsgType == EAPOL_GROUP_MSG_1))
-	{
-		if (KeyDataLength >= 8)	// KDE format exclude GTK length
-    	{
-        	pKDE = (PKDE_ENCAP) pMyKeyData;
-
-
-			DefaultIdx = pKDE->GTKEncap.Kid;
-
-			// Sanity check - KED length
-			if (KeyDataLength < (pKDE->Len + 2))
-    		{
-        		DBGPRINT(RT_DEBUG_ERROR, ("ERROR: The len from KDE is too short \n"));
-        		return FALSE;
-    		}
-
-			// Get GTK length - refer to IEEE 802.11i-2004 p.82
-			GTKLEN = pKDE->Len -6;
-			if (GTKLEN < LEN_AES_KEY)
-			{
-				DBGPRINT(RT_DEBUG_ERROR, ("ERROR: GTK Key length is too short (%d) \n", GTKLEN));
-        		return FALSE;
-			}
-
-    	}
-		else
-    	{
-			DBGPRINT(RT_DEBUG_ERROR, ("ERROR: KDE format length is too short \n"));
-	        return FALSE;
-    	}
-
-		DBGPRINT(RT_DEBUG_TRACE, ("GTK in KDE format ,DefaultKeyID=%d, KeyLen=%d \n", DefaultIdx, GTKLEN));
-		// skip it
-		pMyKeyData += 8;
-		KeyDataLength -= 8;
-
-	}
-	else if (!bWPA2 && MsgType == EAPOL_GROUP_MSG_1)
-	{
-		DefaultIdx = GroupKeyIndex;
-		DBGPRINT(RT_DEBUG_TRACE, ("GTK DefaultKeyID=%d \n", DefaultIdx));
-	}
-
-	// Sanity check - shared key index must be 1 ~ 3
-	if (DefaultIdx < 1 || DefaultIdx > 3)
-    {
-     	DBGPRINT(RT_DEBUG_ERROR, ("ERROR: GTK Key index(%d) is invalid in %s %s \n", DefaultIdx, ((bWPA2) ? "WPA2" : "WPA"), GetEapolMsgType(MsgType)));
-        return FALSE;
-    }
-
-
-#ifdef CONFIG_STA_SUPPORT
-	// Todo
-#endif // CONFIG_STA_SUPPORT //
-
-	return TRUE;
-
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Construct EAPoL message for WPA handshaking
-		Its format is below,
-
-		+--------------------+
-		| Protocol Version	 |  1 octet
-		+--------------------+
-		| Protocol Type		 |	1 octet
-		+--------------------+
-		| Body Length		 |  2 octets
-		+--------------------+
-		| Descriptor Type	 |	1 octet
-		+--------------------+
-		| Key Information    |	2 octets
-		+--------------------+
-		| Key Length	     |  1 octet
-		+--------------------+
-		| Key Repaly Counter |	8 octets
-		+--------------------+
-		| Key Nonce		     |  32 octets
-		+--------------------+
-		| Key IV			 |  16 octets
-		+--------------------+
-		| Key RSC			 |  8 octets
-		+--------------------+
-		| Key ID or Reserved |	8 octets
-		+--------------------+
-		| Key MIC			 |	16 octets
-		+--------------------+
-		| Key Data Length	 |	2 octets
-		+--------------------+
-		| Key Data			 |	n octets
-		+--------------------+
-
-
-	Arguments:
-		pAd			Pointer	to our adapter
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	ConstructEapolMsg(
-	IN 	PRTMP_ADAPTER    	pAd,
-    IN 	UCHAR				AuthMode,
-    IN 	UCHAR				WepStatus,
-    IN 	UCHAR				GroupKeyWepStatus,
-    IN 	UCHAR				MsgType,
-    IN	UCHAR				DefaultKeyIdx,
-    IN 	UCHAR				*ReplayCounter,
-	IN 	UCHAR				*KeyNonce,
-	IN	UCHAR				*TxRSC,
-	IN	UCHAR				*PTK,
-	IN	UCHAR				*GTK,
-	IN	UCHAR				*RSNIE,
-	IN	UCHAR				RSNIE_Len,
-    OUT PEAPOL_PACKET       pMsg)
-{
-	BOOLEAN	bWPA2 = FALSE;
-
-	// Choose WPA2 or not
-	if ((AuthMode == Ndis802_11AuthModeWPA2) || (AuthMode == Ndis802_11AuthModeWPA2PSK))
-		bWPA2 = TRUE;
-
-    // Init Packet and Fill header
-    pMsg->ProVer = EAPOL_VER;
-    pMsg->ProType = EAPOLKey;
-
-	// Default 95 bytes, the EAPoL-Key descriptor exclude Key-data field
-	pMsg->Body_Len[1] = LEN_EAPOL_KEY_MSG;
-
-	// Fill in EAPoL descriptor
-	if (bWPA2)
-		pMsg->KeyDesc.Type = WPA2_KEY_DESC;
-	else
-		pMsg->KeyDesc.Type = WPA1_KEY_DESC;
-
-	// Fill in Key information, refer to IEEE Std 802.11i-2004 page 78
-	// When either the pairwise or the group cipher is AES, the DESC_TYPE_AES(2) shall be used.
-	pMsg->KeyDesc.KeyInfo.KeyDescVer =
-        	(((WepStatus == Ndis802_11Encryption3Enabled) || (GroupKeyWepStatus == Ndis802_11Encryption3Enabled)) ? (DESC_TYPE_AES) : (DESC_TYPE_TKIP));
-
-	// Specify Key Type as Group(0) or Pairwise(1)
-	if (MsgType >= EAPOL_GROUP_MSG_1)
-		pMsg->KeyDesc.KeyInfo.KeyType = GROUPKEY;
-	else
-		pMsg->KeyDesc.KeyInfo.KeyType = PAIRWISEKEY;
-
-	// Specify Key Index, only group_msg1_WPA1
-	if (!bWPA2 && (MsgType >= EAPOL_GROUP_MSG_1))
-		pMsg->KeyDesc.KeyInfo.KeyIndex = DefaultKeyIdx;
-
-	if (MsgType == EAPOL_PAIR_MSG_3)
-		pMsg->KeyDesc.KeyInfo.Install = 1;
-
-	if ((MsgType == EAPOL_PAIR_MSG_1) || (MsgType == EAPOL_PAIR_MSG_3) || (MsgType == EAPOL_GROUP_MSG_1))
-		pMsg->KeyDesc.KeyInfo.KeyAck = 1;
-
-	if (MsgType != EAPOL_PAIR_MSG_1)
-		pMsg->KeyDesc.KeyInfo.KeyMic = 1;
-
-	if ((bWPA2 && (MsgType >= EAPOL_PAIR_MSG_3)) || (!bWPA2 && (MsgType >= EAPOL_GROUP_MSG_1)))
-    {
-       	pMsg->KeyDesc.KeyInfo.Secure = 1;
-    }
-
-	if (bWPA2 && ((MsgType == EAPOL_PAIR_MSG_3) || (MsgType == EAPOL_GROUP_MSG_1)))
-    {
-        pMsg->KeyDesc.KeyInfo.EKD_DL = 1;
-    }
-
-	// key Information element has done.
-	*(USHORT *)(&pMsg->KeyDesc.KeyInfo) = cpu2le16(*(USHORT *)(&pMsg->KeyDesc.KeyInfo));
-
-	// Fill in Key Length
-	{
-		if (MsgType >= EAPOL_GROUP_MSG_1)
-		{
-			// the length of group key cipher
-			pMsg->KeyDesc.KeyLength[1] = ((GroupKeyWepStatus == Ndis802_11Encryption2Enabled) ? TKIP_GTK_LENGTH : LEN_AES_KEY);
-		}
-		else
-		{
-			// the length of pairwise key cipher
-			pMsg->KeyDesc.KeyLength[1] = ((WepStatus == Ndis802_11Encryption2Enabled) ? LEN_TKIP_KEY : LEN_AES_KEY);
-		}
-	}
-
- 	// Fill in replay counter
-    NdisMoveMemory(pMsg->KeyDesc.ReplayCounter, ReplayCounter, LEN_KEY_DESC_REPLAY);
-
-	// Fill Key Nonce field
-	// ANonce : pairwise_msg1 & pairwise_msg3
-	// SNonce : pairwise_msg2
-	// GNonce : group_msg1_wpa1
-	if ((MsgType <= EAPOL_PAIR_MSG_3) || ((!bWPA2 && (MsgType == EAPOL_GROUP_MSG_1))))
-    	NdisMoveMemory(pMsg->KeyDesc.KeyNonce, KeyNonce, LEN_KEY_DESC_NONCE);
-
-	// Fill key IV - WPA2 as 0, WPA1 as random
-	if (!bWPA2 && (MsgType == EAPOL_GROUP_MSG_1))
-	{
-		// Suggest IV be random number plus some number,
-		NdisMoveMemory(pMsg->KeyDesc.KeyIv, &KeyNonce[16], LEN_KEY_DESC_IV);
-        pMsg->KeyDesc.KeyIv[15] += 2;
-	}
-
-    // Fill Key RSC field
-    // It contains the RSC for the GTK being installed.
-	if ((MsgType == EAPOL_PAIR_MSG_3 && bWPA2) || (MsgType == EAPOL_GROUP_MSG_1))
-	{
-        NdisMoveMemory(pMsg->KeyDesc.KeyRsc, TxRSC, 6);
-	}
-
-	// Clear Key MIC field for MIC calculation later
-    NdisZeroMemory(pMsg->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
-
-	ConstructEapolKeyData(pAd,
-						  AuthMode,
-						  WepStatus,
-						  GroupKeyWepStatus,
-						  MsgType,
-						  DefaultKeyIdx,
-						  bWPA2,
-						  PTK,
-						  GTK,
-						  RSNIE,
-						  RSNIE_Len,
-						  pMsg);
-
-	// Calculate MIC and fill in KeyMic Field except Pairwise Msg 1.
-	if (MsgType != EAPOL_PAIR_MSG_1)
-	{
-		CalculateMIC(pAd, WepStatus, PTK, pMsg);
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("===> ConstructEapolMsg for %s %s\n", ((bWPA2) ? "WPA2" : "WPA"), GetEapolMsgType(MsgType)));
-	DBGPRINT(RT_DEBUG_TRACE, ("	     Body length = %d \n", pMsg->Body_Len[1]));
-	DBGPRINT(RT_DEBUG_TRACE, ("	     Key length  = %d \n", pMsg->KeyDesc.KeyLength[1]));
-
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Construct the Key Data field of EAPoL message
-
-	Arguments:
-		pAd			Pointer	to our adapter
-		Elem		Message body
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	ConstructEapolKeyData(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			AuthMode,
-	IN	UCHAR			WepStatus,
-	IN	UCHAR			GroupKeyWepStatus,
-	IN 	UCHAR			MsgType,
-	IN	UCHAR			DefaultKeyIdx,
-	IN	BOOLEAN			bWPA2Capable,
-	IN	UCHAR			*PTK,
-	IN	UCHAR			*GTK,
-	IN	UCHAR			*RSNIE,
-	IN	UCHAR			RSNIE_LEN,
-	OUT PEAPOL_PACKET   pMsg)
-{
-	UCHAR		*mpool, *Key_Data, *Rc4GTK;
-	UCHAR       ekey[(LEN_KEY_DESC_IV+LEN_EAP_EK)];
-	UCHAR		data_offset;
-
-
-	if (MsgType == EAPOL_PAIR_MSG_1 || MsgType == EAPOL_PAIR_MSG_4 || MsgType == EAPOL_GROUP_MSG_2)
-		return;
-
-	// allocate memory pool
-	os_alloc_mem(pAd, (PUCHAR *)&mpool, 1500);
-
-    if (mpool == NULL)
-		return;
-
-	/* Rc4GTK Len = 512 */
-	Rc4GTK = (UCHAR *) ROUND_UP(mpool, 4);
-	/* Key_Data Len = 512 */
-	Key_Data = (UCHAR *) ROUND_UP(Rc4GTK + 512, 4);
-
-	NdisZeroMemory(Key_Data, 512);
-	pMsg->KeyDesc.KeyDataLen[1] = 0;
-	data_offset = 0;
-
-	// Encapsulate RSNIE in pairwise_msg2 & pairwise_msg3
-	if (RSNIE_LEN && ((MsgType == EAPOL_PAIR_MSG_2) || (MsgType == EAPOL_PAIR_MSG_3)))
-	{
-		if (bWPA2Capable)
-			Key_Data[data_offset + 0] = IE_WPA2;
-		else
-			Key_Data[data_offset + 0] = IE_WPA;
-
-        Key_Data[data_offset + 1] = RSNIE_LEN;
-		NdisMoveMemory(&Key_Data[data_offset + 2], RSNIE, RSNIE_LEN);
-		data_offset += (2 + RSNIE_LEN);
-	}
-
-	// Encapsulate KDE format in pairwise_msg3_WPA2 & group_msg1_WPA2
-	if (bWPA2Capable && ((MsgType == EAPOL_PAIR_MSG_3) || (MsgType == EAPOL_GROUP_MSG_1)))
-	{
-		// Key Data Encapsulation (KDE) format - 802.11i-2004  Figure-43w and Table-20h
-        Key_Data[data_offset + 0] = 0xDD;
-
-		if (GroupKeyWepStatus == Ndis802_11Encryption3Enabled)
-		{
-			Key_Data[data_offset + 1] = 0x16;// 4+2+16(OUI+DataType+DataField)
-		}
-		else
-		{
-			Key_Data[data_offset + 1] = 0x26;// 4+2+32(OUI+DataType+DataField)
-		}
-
-        Key_Data[data_offset + 2] = 0x00;
-        Key_Data[data_offset + 3] = 0x0F;
-        Key_Data[data_offset + 4] = 0xAC;
-        Key_Data[data_offset + 5] = 0x01;
-
-		// GTK KDE format - 802.11i-2004  Figure-43x
-        Key_Data[data_offset + 6] = (DefaultKeyIdx & 0x03);
-        Key_Data[data_offset + 7] = 0x00;	// Reserved Byte
-
-		data_offset += 8;
-	}
-
-
-	// Encapsulate GTK and encrypt the key-data field with KEK.
-	// Only for pairwise_msg3_WPA2 and group_msg1
-	if ((MsgType == EAPOL_PAIR_MSG_3 && bWPA2Capable) || (MsgType == EAPOL_GROUP_MSG_1))
-	{
-		// Fill in GTK
-		if (GroupKeyWepStatus == Ndis802_11Encryption3Enabled)
-		{
-			NdisMoveMemory(&Key_Data[data_offset], GTK, LEN_AES_KEY);
-			data_offset += LEN_AES_KEY;
-		}
-		else
-		{
-			NdisMoveMemory(&Key_Data[data_offset], GTK, TKIP_GTK_LENGTH);
-			data_offset += TKIP_GTK_LENGTH;
-		}
-
-		// Still dont know why, but if not append will occur "GTK not include in MSG3"
-		// Patch for compatibility between zero config and funk
-		if (MsgType == EAPOL_PAIR_MSG_3 && bWPA2Capable)
-		{
-			if (GroupKeyWepStatus == Ndis802_11Encryption3Enabled)
-			{
-				Key_Data[data_offset + 0] = 0xDD;
-				Key_Data[data_offset + 1] = 0;
-				data_offset += 2;
-			}
-			else
-			{
-				Key_Data[data_offset + 0] = 0xDD;
-				Key_Data[data_offset + 1] = 0;
-				Key_Data[data_offset + 2] = 0;
-				Key_Data[data_offset + 3] = 0;
-				Key_Data[data_offset + 4] = 0;
-				Key_Data[data_offset + 5] = 0;
-				data_offset += 6;
-			}
-		}
-
-		// Encrypt the data material in key data field
-		if (WepStatus == Ndis802_11Encryption3Enabled)
-		{
-			AES_GTK_KEY_WRAP(&PTK[16], Key_Data, data_offset, Rc4GTK);
-            // AES wrap function will grow 8 bytes in length
-            data_offset += 8;
-		}
-		else
-		{
-			// PREPARE Encrypted  "Key DATA" field.  (Encrypt GTK with RC4, usinf PTK[16]->[31] as Key, IV-field as IV)
-			// put TxTsc in Key RSC field
-			pAd->PrivateInfo.FCSCRC32 = PPPINITFCS32;   //Init crc32.
-
-			// ekey is the contanetion of IV-field, and PTK[16]->PTK[31]
-			NdisMoveMemory(ekey, pMsg->KeyDesc.KeyIv, LEN_KEY_DESC_IV);
-			NdisMoveMemory(&ekey[LEN_KEY_DESC_IV], &PTK[16], LEN_EAP_EK);
-			ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, ekey, sizeof(ekey));  //INIT SBOX, KEYLEN+3(IV)
-			pAd->PrivateInfo.FCSCRC32 = RTMP_CALC_FCS32(pAd->PrivateInfo.FCSCRC32, Key_Data, data_offset);
-			WPAARCFOUR_ENCRYPT(&pAd->PrivateInfo.WEPCONTEXT, Rc4GTK, Key_Data, data_offset);
-		}
-
-		NdisMoveMemory(pMsg->KeyDesc.KeyData, Rc4GTK, data_offset);
-	}
-	else
-	{
-		NdisMoveMemory(pMsg->KeyDesc.KeyData, Key_Data, data_offset);
-	}
-
-	// set key data length field and total length
-	pMsg->KeyDesc.KeyDataLen[1] = data_offset;
-    pMsg->Body_Len[1] += data_offset;
-
-	os_free_mem(pAd, mpool);
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Calcaulate MIC. It is used during 4-ways handsharking.
-
-	Arguments:
-		pAd				-	pointer to our pAdapter context
-    	PeerWepStatus	-	indicate the encryption type
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-VOID	CalculateMIC(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			PeerWepStatus,
-	IN	UCHAR			*PTK,
-	OUT PEAPOL_PACKET   pMsg)
-{
-    UCHAR   *OutBuffer;
-	ULONG	FrameLen = 0;
-	UCHAR	mic[LEN_KEY_DESC_MIC];
-	UCHAR	digest[80];
-
-	// allocate memory for MIC calculation
-	os_alloc_mem(pAd, (PUCHAR *)&OutBuffer, 512);
-
-    if (OutBuffer == NULL)
-    {
-		DBGPRINT(RT_DEBUG_ERROR, ("!!!CalculateMIC: no memory!!!\n"));
-		return;
-    }
-
-	// make a frame for calculating MIC.
-    MakeOutgoingFrame(OutBuffer,            	&FrameLen,
-                      pMsg->Body_Len[1] + 4,  	pMsg,
-                      END_OF_ARGS);
-
-	NdisZeroMemory(mic, sizeof(mic));
-
-	// Calculate MIC
-    if (PeerWepStatus == Ndis802_11Encryption3Enabled)
- 	{
-		HMAC_SHA1(OutBuffer,  FrameLen, PTK, LEN_EAP_MICK, digest);
-		NdisMoveMemory(mic, digest, LEN_KEY_DESC_MIC);
-	}
-	else
-	{
-		hmac_md5(PTK,  LEN_EAP_MICK, OutBuffer, FrameLen, mic);
-	}
-
-	// store the calculated MIC
-	NdisMoveMemory(pMsg->KeyDesc.KeyMic, mic, LEN_KEY_DESC_MIC);
-
-	os_free_mem(pAd, OutBuffer);
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Some received frames can't decrypt by Asic, so decrypt them by software.
-
-	Arguments:
-		pAd				-	pointer to our pAdapter context
-    	PeerWepStatus	-	indicate the encryption type
-
-	Return Value:
-		NDIS_STATUS_SUCCESS		-	decryption successful
-		NDIS_STATUS_FAILURE		-	decryption failure
-
-	========================================================================
-*/
-NDIS_STATUS	RTMPSoftDecryptBroadCastData(
-	IN	PRTMP_ADAPTER					pAd,
-	IN	RX_BLK							*pRxBlk,
-	IN  NDIS_802_11_ENCRYPTION_STATUS 	GroupCipher,
-	IN  PCIPHER_KEY						pShard_key)
-{
-	PRXWI_STRUC			pRxWI = pRxBlk->pRxWI;
-
-
-
-	// handle WEP decryption
-	if (GroupCipher == Ndis802_11Encryption1Enabled)
-    {
-		if (RTMPSoftDecryptWEP(pAd, pRxBlk->pData, pRxWI->MPDUtotalByteCount, pShard_key))
-		{
-
-			//Minus IV[4] & ICV[4]
-			pRxWI->MPDUtotalByteCount -= 8;
-		}
-		else
-		{
-			DBGPRINT(RT_DEBUG_ERROR, ("ERROR : Software decrypt WEP data fails.\n"));
-			// give up this frame
-			return NDIS_STATUS_FAILURE;
-		}
-	}
-	// handle TKIP decryption
-	else if (GroupCipher == Ndis802_11Encryption2Enabled)
-	{
-		if (RTMPSoftDecryptTKIP(pAd, pRxBlk->pData, pRxWI->MPDUtotalByteCount, 0, pShard_key))
-		{
-
-			//Minus 8 bytes MIC, 8 bytes IV/EIV, 4 bytes ICV
-			pRxWI->MPDUtotalByteCount -= 20;
-		}
-        else
-		{
-			DBGPRINT(RT_DEBUG_ERROR, ("ERROR : RTMPSoftDecryptTKIP Failed\n"));
-			// give up this frame
-			return NDIS_STATUS_FAILURE;
-        }
-	}
-	// handle AES decryption
-	else if (GroupCipher == Ndis802_11Encryption3Enabled)
-	{
-		if (RTMPSoftDecryptAES(pAd, pRxBlk->pData, pRxWI->MPDUtotalByteCount , pShard_key))
-		{
-
-			//8 bytes MIC, 8 bytes IV/EIV (CCMP Header)
-			pRxWI->MPDUtotalByteCount -= 16;
-		}
-		else
-		{
-			DBGPRINT(RT_DEBUG_ERROR, ("ERROR : RTMPSoftDecryptAES Failed\n"));
-			// give up this frame
-			return NDIS_STATUS_FAILURE;
-		}
-	}
-	else
-	{
-		// give up this frame
-		return NDIS_STATUS_FAILURE;
-	}
-
-	return NDIS_STATUS_SUCCESS;
-
-}
-
+#include "../../rt2870/common/cmm_wpa.c"
diff --git a/drivers/staging/rt3070/common/dfs.c b/drivers/staging/rt3070/common/dfs.c
index 28d60145791..c584a6924c3 100644
--- a/drivers/staging/rt3070/common/dfs.c
+++ b/drivers/staging/rt3070/common/dfs.c
@@ -1,441 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-    ap_dfs.c
-
-    Abstract:
-    Support DFS function.
-
-    Revision History:
-    Who       When            What
-    --------  ----------      ----------------------------------------------
-    Fonchi    03-12-2007      created
-*/
-
-#include "../rt_config.h"
-
-typedef struct _RADAR_DURATION_TABLE
-{
-	ULONG RDDurRegion;
-	ULONG RadarSignalDuration;
-	ULONG Tolerance;
-} RADAR_DURATION_TABLE, *PRADAR_DURATION_TABLE;
-
-
-static UCHAR RdIdleTimeTable[MAX_RD_REGION][4] =
-{
-	{9, 250, 250, 250},		// CE
-	{4, 250, 250, 250},		// FCC
-	{4, 250, 250, 250},		// JAP
-	{15, 250, 250, 250},	// JAP_W53
-	{4, 250, 250, 250}		// JAP_W56
-};
-
-/*
-	========================================================================
-
-	Routine Description:
-		Bbp Radar detection routine
-
-	Arguments:
-		pAd 	Pointer to our adapter
-
-	Return Value:
-
-	========================================================================
-*/
-VOID BbpRadarDetectionStart(
-	IN PRTMP_ADAPTER pAd)
-{
-	UINT8 RadarPeriod;
-
-	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 114, 0x02);
-	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 121, 0x20);
-	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 122, 0x00);
-	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 123, 0x08/*0x80*/);
-	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 124, 0x28);
-	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 125, 0xff);
-
-	RadarPeriod = ((UINT)RdIdleTimeTable[pAd->CommonCfg.RadarDetect.RDDurRegion][0] + (UINT)pAd->CommonCfg.RadarDetect.DfsSessionTime) < 250 ?
-			(RdIdleTimeTable[pAd->CommonCfg.RadarDetect.RDDurRegion][0] + pAd->CommonCfg.RadarDetect.DfsSessionTime) : 250;
-
-	RTMP_IO_WRITE8(pAd, 0x7020, 0x1d);
-	RTMP_IO_WRITE8(pAd, 0x7021, 0x40);
-
-	RadarDetectionStart(pAd, 0, RadarPeriod);
-	return;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Bbp Radar detection routine
-
-	Arguments:
-		pAd 	Pointer to our adapter
-
-	Return Value:
-
-	========================================================================
-*/
-VOID BbpRadarDetectionStop(
-	IN PRTMP_ADAPTER pAd)
-{
-	RTMP_IO_WRITE8(pAd, 0x7020, 0x1d);
-	RTMP_IO_WRITE8(pAd, 0x7021, 0x60);
-
-	RadarDetectionStop(pAd);
-	return;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Radar detection routine
-
-	Arguments:
-		pAd 	Pointer to our adapter
-
-	Return Value:
-
-	========================================================================
-*/
-VOID RadarDetectionStart(
-	IN PRTMP_ADAPTER pAd,
-	IN BOOLEAN CTSProtect,
-	IN UINT8 CTSPeriod)
-{
-	UINT8 DfsActiveTime = (pAd->CommonCfg.RadarDetect.DfsSessionTime & 0x1f);
-	UINT8 CtsProtect = (CTSProtect == 1) ? 0x02 : 0x01; // CTS protect.
-
-	if (CTSProtect != 0)
-	{
-		switch(pAd->CommonCfg.RadarDetect.RDDurRegion)
-		{
-		case FCC:
-		case JAP_W56:
-			CtsProtect = 0x03;
-			break;
-
-		case CE:
-		case JAP_W53:
-		default:
-			CtsProtect = 0x02;
-			break;
-		}
-	}
-	else
-		CtsProtect = 0x01;
-
-
-	// send start-RD with CTS protection command to MCU
-	// highbyte [7]		reserve
-	// highbyte [6:5]	0x: stop Carrier/Radar detection
-	// highbyte [10]:	Start Carrier/Radar detection without CTS protection, 11: Start Carrier/Radar detection with CTS protection
-	// highbyte [4:0]	Radar/carrier detection duration. In 1ms.
-
-	// lowbyte [7:0]	Radar/carrier detection period, in 1ms.
-	AsicSendCommandToMcu(pAd, 0x60, 0xff, CTSPeriod, DfsActiveTime | (CtsProtect << 5));
-	//AsicSendCommandToMcu(pAd, 0x63, 0xff, 10, 0);
-
-	return;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Radar detection routine
-
-	Arguments:
-		pAd 	Pointer to our adapter
-
-	Return Value:
-		TRUE	Found radar signal
-		FALSE	Not found radar signal
-
-	========================================================================
-*/
-VOID RadarDetectionStop(
-	IN PRTMP_ADAPTER	pAd)
-{
-	DBGPRINT(RT_DEBUG_TRACE,("RadarDetectionStop.\n"));
-	AsicSendCommandToMcu(pAd, 0x60, 0xff, 0x00, 0x00);	// send start-RD with CTS protection command to MCU
-
-	return;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Radar channel check routine
-
-	Arguments:
-		pAd 	Pointer to our adapter
-
-	Return Value:
-		TRUE	need to do radar detect
-		FALSE	need not to do radar detect
-
-	========================================================================
-*/
-BOOLEAN RadarChannelCheck(
-	IN PRTMP_ADAPTER	pAd,
-	IN UCHAR			Ch)
-{
-#if 1
-	INT		i;
-	BOOLEAN result = FALSE;
-
-	for (i=0; i<pAd->ChannelListNum; i++)
-	{
-		if (Ch == pAd->ChannelList[i].Channel)
-		{
-			result = pAd->ChannelList[i].DfsReq;
-			break;
-		}
-	}
-
-	return result;
-#else
-	INT		i;
-	UCHAR	Channel[15]={52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140};
-
-	for (i=0; i<15; i++)
-	{
-		if (Ch == Channel[i])
-		{
-			break;
-		}
-	}
-
-	if (i != 15)
-		return TRUE;
-	else
-		return FALSE;
-#endif
-}
-
-ULONG JapRadarType(
-	IN PRTMP_ADAPTER pAd)
-{
-	ULONG		i;
-	const UCHAR	Channel[15]={52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140};
-
-	if (pAd->CommonCfg.RadarDetect.RDDurRegion != JAP)
-	{
-		return pAd->CommonCfg.RadarDetect.RDDurRegion;
-	}
-
-	for (i=0; i<15; i++)
-	{
-		if (pAd->CommonCfg.Channel == Channel[i])
-		{
-			break;
-		}
-	}
-
-	if (i < 4)
-		return JAP_W53;
-	else if (i < 15)
-		return JAP_W56;
-	else
-		return JAP; // W52
-
-}
-
-ULONG RTMPBbpReadRadarDuration(
-	IN PRTMP_ADAPTER	pAd)
-{
-	UINT8 byteValue = 0;
-	ULONG result;
-
-	BBP_IO_READ8_BY_REG_ID(pAd, BBP_R115, &byteValue);
-
-	result = 0;
-	switch (byteValue)
-	{
-	case 1: // radar signal detected by pulse mode.
-	case 2: // radar signal detected by width mode.
-		result = RTMPReadRadarDuration(pAd);
-		break;
-
-	case 0: // No radar signal.
-	default:
-
-		result = 0;
-		break;
-	}
-
-	return result;
-}
-
-ULONG RTMPReadRadarDuration(
-	IN PRTMP_ADAPTER	pAd)
-{
-	ULONG result = 0;
-
-#ifdef DFS_SUPPORT
-	UINT8 duration1 = 0, duration2 = 0, duration3 = 0;
-
-	BBP_IO_READ8_BY_REG_ID(pAd, BBP_R116, &duration1);
-	BBP_IO_READ8_BY_REG_ID(pAd, BBP_R117, &duration2);
-	BBP_IO_READ8_BY_REG_ID(pAd, BBP_R118, &duration3);
-	result = (duration1 << 16) + (duration2 << 8) + duration3;
-#endif // DFS_SUPPORT //
-
-	return result;
-
-}
-
-VOID RTMPCleanRadarDuration(
-	IN PRTMP_ADAPTER	pAd)
-{
-	return;
-}
-
-/*
-    ========================================================================
-    Routine Description:
-        Radar wave detection. The API should be invoke each second.
-
-    Arguments:
-        pAd         - Adapter pointer
-
-    Return Value:
-        None
-
-    ========================================================================
-*/
-VOID ApRadarDetectPeriodic(
-	IN PRTMP_ADAPTER pAd)
-{
-	INT	i;
-
-	pAd->CommonCfg.RadarDetect.InServiceMonitorCount++;
-
-	for (i=0; i<pAd->ChannelListNum; i++)
-	{
-		if (pAd->ChannelList[i].RemainingTimeForUse > 0)
-		{
-			pAd->ChannelList[i].RemainingTimeForUse --;
-			if ((pAd->Mlme.PeriodicRound%5) == 0)
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("RadarDetectPeriodic - ch=%d, RemainingTimeForUse=%d\n", pAd->ChannelList[i].Channel, pAd->ChannelList[i].RemainingTimeForUse));
-			}
-		}
-	}
-
-	//radar detect
-	if ((pAd->CommonCfg.Channel > 14)
-		&& (pAd->CommonCfg.bIEEE80211H == 1)
-		&& RadarChannelCheck(pAd, pAd->CommonCfg.Channel))
-	{
-		RadarDetectPeriodic(pAd);
-	}
-
-	return;
-}
-
-// Periodic Radar detection, switch channel will occur in RTMPHandleTBTTInterrupt()
-// Before switch channel, driver needs doing channel switch announcement.
-VOID RadarDetectPeriodic(
-	IN PRTMP_ADAPTER	pAd)
-{
-	// need to check channel availability, after switch channel
-	if (pAd->CommonCfg.RadarDetect.RDMode != RD_SILENCE_MODE)
-			return;
-
-	// channel availability check time is 60sec, use 65 for assurance
-	if (pAd->CommonCfg.RadarDetect.RDCount++ > pAd->CommonCfg.RadarDetect.ChMovingTime)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("Not found radar signal, start send beacon and radar detection in service monitor\n\n"));
-			BbpRadarDetectionStop(pAd);
-		AsicEnableBssSync(pAd);
-		pAd->CommonCfg.RadarDetect.RDMode = RD_NORMAL_MODE;
-
-
-		return;
-	}
-
-	return;
-}
-
-
-/*
-    ==========================================================================
-    Description:
-		change channel moving time for DFS testing.
-
-	Arguments:
-	    pAdapter                    Pointer to our adapter
-	    wrq                         Pointer to the ioctl argument
-
-    Return Value:
-        None
-
-    Note:
-        Usage:
-               1.) iwpriv ra0 set ChMovTime=[value]
-    ==========================================================================
-*/
-INT Set_ChMovingTime_Proc(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR arg)
-{
-	UINT8 Value;
-
-	Value = simple_strtol(arg, 0, 10);
-
-	pAd->CommonCfg.RadarDetect.ChMovingTime = Value;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("%s:: %d\n", __FUNCTION__,
-		pAd->CommonCfg.RadarDetect.ChMovingTime));
-
-	return TRUE;
-}
-
-INT Set_LongPulseRadarTh_Proc(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR arg)
-{
-	UINT8 Value;
-
-	Value = simple_strtol(arg, 0, 10) > 10 ? 10 : simple_strtol(arg, 0, 10);
-
-	pAd->CommonCfg.RadarDetect.LongPulseRadarTh = Value;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("%s:: %d\n", __FUNCTION__,
-		pAd->CommonCfg.RadarDetect.LongPulseRadarTh));
-
-	return TRUE;
-}
-
-
+#include "../../rt2870/common/dfs.c"
diff --git a/drivers/staging/rt3070/common/eeprom.c b/drivers/staging/rt3070/common/eeprom.c
index 63e1dc14d15..0c567d3dad0 100644
--- a/drivers/staging/rt3070/common/eeprom.c
+++ b/drivers/staging/rt3070/common/eeprom.c
@@ -1,1498 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	eeprom.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Name		Date			Modification logs
-*/
-#include	"../rt_config.h"
-
-// IRQL = PASSIVE_LEVEL
-VOID RaiseClock(
-    IN	PRTMP_ADAPTER	pAd,
-    IN  UINT32 *x)
-{
-    *x = *x | EESK;
-    RTMP_IO_WRITE32(pAd, E2PROM_CSR, *x);
-    RTMPusecDelay(1);				// Max frequency = 1MHz in Spec. definition
-}
-
-// IRQL = PASSIVE_LEVEL
-VOID LowerClock(
-    IN	PRTMP_ADAPTER	pAd,
-    IN  UINT32 *x)
-{
-    *x = *x & ~EESK;
-    RTMP_IO_WRITE32(pAd, E2PROM_CSR, *x);
-    RTMPusecDelay(1);
-}
-
-// IRQL = PASSIVE_LEVEL
-USHORT ShiftInBits(
-    IN	PRTMP_ADAPTER	pAd)
-{
-    UINT32		x,i;
-	USHORT      data=0;
-
-    RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
-
-    x &= ~( EEDO | EEDI);
-
-    for(i=0; i<16; i++)
-    {
-        data = data << 1;
-        RaiseClock(pAd, &x);
-
-        RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
-		LowerClock(pAd, &x); //prevent read failed
-
-        x &= ~(EEDI);
-        if(x & EEDO)
-            data |= 1;
-    }
-
-    return data;
-}
-
-// IRQL = PASSIVE_LEVEL
-VOID ShiftOutBits(
-    IN	PRTMP_ADAPTER	pAd,
-    IN  USHORT data,
-    IN  USHORT count)
-{
-    UINT32       x,mask;
-
-    mask = 0x01 << (count - 1);
-    RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
-
-    x &= ~(EEDO | EEDI);
-
-    do
-    {
-        x &= ~EEDI;
-        if(data & mask)		x |= EEDI;
-
-        RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
-
-        RaiseClock(pAd, &x);
-        LowerClock(pAd, &x);
-
-        mask = mask >> 1;
-    } while(mask);
-
-    x &= ~EEDI;
-    RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
-}
-
-// IRQL = PASSIVE_LEVEL
-VOID EEpromCleanup(
-    IN	PRTMP_ADAPTER	pAd)
-{
-    UINT32 x;
-
-    RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
-
-    x &= ~(EECS | EEDI);
-    RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
-
-    RaiseClock(pAd, &x);
-    LowerClock(pAd, &x);
-}
-
-VOID EWEN(
-	IN	PRTMP_ADAPTER	pAd)
-{
-    UINT32	x;
-
-    // reset bits and set EECS
-    RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
-    x &= ~(EEDI | EEDO | EESK);
-    x |= EECS;
-    RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
-
-	// kick a pulse
-	RaiseClock(pAd, &x);
-	LowerClock(pAd, &x);
-
-    // output the read_opcode and six pulse in that order
-    ShiftOutBits(pAd, EEPROM_EWEN_OPCODE, 5);
-    ShiftOutBits(pAd, 0, 6);
-
-    EEpromCleanup(pAd);
-}
-
-VOID EWDS(
-	IN	PRTMP_ADAPTER	pAd)
-{
-    UINT32	x;
-
-    // reset bits and set EECS
-    RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
-    x &= ~(EEDI | EEDO | EESK);
-    x |= EECS;
-    RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
-
-	// kick a pulse
-	RaiseClock(pAd, &x);
-	LowerClock(pAd, &x);
-
-    // output the read_opcode and six pulse in that order
-    ShiftOutBits(pAd, EEPROM_EWDS_OPCODE, 5);
-    ShiftOutBits(pAd, 0, 6);
-
-    EEpromCleanup(pAd);
-}
-
-// IRQL = PASSIVE_LEVEL
-USHORT RTMP_EEPROM_READ16(
-    IN	PRTMP_ADAPTER	pAd,
-    IN  USHORT Offset)
-{
-    UINT32		x;
-    USHORT		data;
-
-	if (pAd->NicConfig2.field.AntDiversity)
-    {
-    	pAd->EepromAccess = TRUE;
-    }
-//2008/09/11:KH add to support efuse<--
-//2008/09/11:KH add to support efuse-->
-{
-    Offset /= 2;
-    // reset bits and set EECS
-    RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
-    x &= ~(EEDI | EEDO | EESK);
-    x |= EECS;
-    RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
-
-	// patch can not access e-Fuse issue
-    if (!IS_RT3090(pAd))
-    {
-	// kick a pulse
-	RaiseClock(pAd, &x);
-	LowerClock(pAd, &x);
-    }
-
-    // output the read_opcode and register number in that order
-    ShiftOutBits(pAd, EEPROM_READ_OPCODE, 3);
-    ShiftOutBits(pAd, Offset, pAd->EEPROMAddressNum);
-
-    // Now read the data (16 bits) in from the selected EEPROM word
-    data = ShiftInBits(pAd);
-
-    EEpromCleanup(pAd);
-
-	// Antenna and EEPROM access are both using EESK pin,
-    // Therefor we should avoid accessing EESK at the same time
-    // Then restore antenna after EEPROM access
-	if ((pAd->NicConfig2.field.AntDiversity) || (pAd->RfIcType == RFIC_3020))
-    {
-	    pAd->EepromAccess = FALSE;
-	    AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt);
-    }
-}
-    return data;
-}	//ReadEEprom
-
-VOID RTMP_EEPROM_WRITE16(
-    IN	PRTMP_ADAPTER	pAd,
-    IN  USHORT Offset,
-    IN  USHORT Data)
-{
-    UINT32 x;
-
-	if (pAd->NicConfig2.field.AntDiversity)
-    {
-    	pAd->EepromAccess = TRUE;
-    }
-	//2008/09/11:KH add to support efuse<--
-//2008/09/11:KH add to support efuse-->
-	{
-	Offset /= 2;
-
-	EWEN(pAd);
-
-    // reset bits and set EECS
-    RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
-    x &= ~(EEDI | EEDO | EESK);
-    x |= EECS;
-    RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
-
-	// patch can not access e-Fuse issue
-    if (!IS_RT3090(pAd))
-    {
-	// kick a pulse
-	RaiseClock(pAd, &x);
-	LowerClock(pAd, &x);
-    }
-
-    // output the read_opcode ,register number and data in that order
-    ShiftOutBits(pAd, EEPROM_WRITE_OPCODE, 3);
-    ShiftOutBits(pAd, Offset, pAd->EEPROMAddressNum);
-	ShiftOutBits(pAd, Data, 16);		// 16-bit access
-
-    // read DO status
-    RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
-
-	EEpromCleanup(pAd);
-
-	RTMPusecDelay(10000);	//delay for twp(MAX)=10ms
-
-	EWDS(pAd);
-
-    EEpromCleanup(pAd);
-
-	// Antenna and EEPROM access are both using EESK pin,
-    // Therefor we should avoid accessing EESK at the same time
-    // Then restore antenna after EEPROM access
-	if ((pAd->NicConfig2.field.AntDiversity) || (pAd->RfIcType == RFIC_3020))
-    {
-	    pAd->EepromAccess = FALSE;
-	    AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt);
-    }
-}
-}
-
-//2008/09/11:KH add to support efuse<--
-#ifdef RT30xx
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-UCHAR eFuseReadRegisters(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT Offset,
-	IN	USHORT Length,
-	OUT	USHORT* pData)
-{
-	EFUSE_CTRL_STRUC		eFuseCtrlStruc;
-	int	i;
-	USHORT	efuseDataOffset;
-	UINT32	data;
-
-	RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
-
-	//Step0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
-	//Use the eeprom logical address and covert to address to block number
-	eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0;
-
-	//Step1. Write EFSROM_MODE (0x580, bit7:bit6) to 0.
-	eFuseCtrlStruc.field.EFSROM_MODE = 0;
-
-	//Step2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure.
-	eFuseCtrlStruc.field.EFSROM_KICK = 1;
-
-	NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
-	RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
-
-	//Step3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again.
-	i = 0;
-	while(i < 100)
-	{
-		//rtmp.HwMemoryReadDword(EFUSE_CTRL, (DWORD *) &eFuseCtrlStruc, 4);
-		RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
-		if(eFuseCtrlStruc.field.EFSROM_KICK == 0)
-		{
-			break;
-		}
-		RTMPusecDelay(2);
-		i++;
-	}
-
-	//if EFSROM_AOUT is not found in physical address, write 0xffff
-	if (eFuseCtrlStruc.field.EFSROM_AOUT == 0x3f)
-	{
-		for(i=0; i<Length/2; i++)
-			*(pData+2*i) = 0xffff;
-	}
-	else
-	{
-		//Step4. Read 16-byte of data from EFUSE_DATA0-3 (0x590-0x59C)
-		efuseDataOffset =  EFUSE_DATA3 - (Offset & 0xC)  ;
-		//data hold 4 bytes data.
-		//In RTMP_IO_READ32 will automatically execute 32-bytes swapping
-		RTMP_IO_READ32(pAd, efuseDataOffset, &data);
-		//Decide the upper 2 bytes or the bottom 2 bytes.
-		// Little-endian		S	|	S	Big-endian
-		// addr	3	2	1	0	|	0	1	2	3
-		// Ori-V	D	C	B	A	|	A	B	C	D
-		//After swapping
-		//		D	C	B	A	|	D	C	B	A
-		//Return 2-bytes
-		//The return byte statrs from S. Therefore, the little-endian will return BA, the Big-endian will return DC.
-		//For returning the bottom 2 bytes, the Big-endian should shift right 2-bytes.
-#ifdef RT_BIG_ENDIAN
-		data = data << (8*((Offset & 0x3)^0x2));
-#else
-		data = data >> (8*(Offset & 0x3));
-#endif
-
-		NdisMoveMemory(pData, &data, Length);
-	}
-
-	return (UCHAR) eFuseCtrlStruc.field.EFSROM_AOUT;
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-VOID eFusePhysicalReadRegisters(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT Offset,
-	IN	USHORT Length,
-	OUT	USHORT* pData)
-{
-	EFUSE_CTRL_STRUC		eFuseCtrlStruc;
-	int	i;
-	USHORT	efuseDataOffset;
-	UINT32	data;
-
-	RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
-
-	//Step0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
-	eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0;
-
-	//Step1. Write EFSROM_MODE (0x580, bit7:bit6) to 1.
-	//Read in physical view
-	eFuseCtrlStruc.field.EFSROM_MODE = 1;
-
-	//Step2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure.
-	eFuseCtrlStruc.field.EFSROM_KICK = 1;
-
-	NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
-	RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
-
-	//Step3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again.
-	i = 0;
-	while(i < 100)
-	{
-		RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
-		if(eFuseCtrlStruc.field.EFSROM_KICK == 0)
-			break;
-		RTMPusecDelay(2);
-		i++;
-	}
-
-	//Step4. Read 16-byte of data from EFUSE_DATA0-3 (0x59C-0x590)
-	//Because the size of each EFUSE_DATA is 4 Bytes, the size of address of each is 2 bits.
-	//The previous 2 bits is the EFUSE_DATA number, the last 2 bits is used to decide which bytes
-	//Decide which EFUSE_DATA to read
-	//590:F E D C
-	//594:B A 9 8
-	//598:7 6 5 4
-	//59C:3 2 1 0
-	efuseDataOffset =  EFUSE_DATA3 - (Offset & 0xC)  ;
-
-	RTMP_IO_READ32(pAd, efuseDataOffset, &data);
-
-#ifdef RT_BIG_ENDIAN
-		data = data << (8*((Offset & 0x3)^0x2));
-#else
-	data = data >> (8*(Offset & 0x3));
-#endif
-
-	NdisMoveMemory(pData, &data, Length);
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-VOID eFuseReadPhysical(
-	IN	PRTMP_ADAPTER	pAd,
-  	IN	PUSHORT lpInBuffer,
-  	IN	ULONG nInBufferSize,
-  	OUT	PUSHORT lpOutBuffer,
-  	IN	ULONG nOutBufferSize
-)
-{
-	USHORT* pInBuf = (USHORT*)lpInBuffer;
-	USHORT* pOutBuf = (USHORT*)lpOutBuffer;
-
-	USHORT Offset = pInBuf[0];					//addr
-	USHORT Length = pInBuf[1];					//length
-	int 		i;
-
-	for(i=0; i<Length; i+=2)
-	{
-		eFusePhysicalReadRegisters(pAd,Offset+i, 2, &pOutBuf[i/2]);
-	}
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-NTSTATUS eFuseRead(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT			Offset,
-	OUT	PUCHAR			pData,
-	IN	USHORT			Length)
-{
-	USHORT* pOutBuf = (USHORT*)pData;
-	NTSTATUS	Status = STATUS_SUCCESS;
-	UCHAR	EFSROM_AOUT;
-	int	i;
-
-	for(i=0; i<Length; i+=2)
-	{
-		EFSROM_AOUT = eFuseReadRegisters(pAd, Offset+i, 2, &pOutBuf[i/2]);
-	}
-	return Status;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-VOID eFusePhysicalWriteRegisters(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT Offset,
-	IN	USHORT Length,
-	OUT	USHORT* pData)
-{
-	EFUSE_CTRL_STRUC		eFuseCtrlStruc;
-	int	i;
-	USHORT	efuseDataOffset;
-	UINT32	data, eFuseDataBuffer[4];
-
-	//Step0. Write 16-byte of data to EFUSE_DATA0-3 (0x590-0x59C), where EFUSE_DATA0 is the LSB DW, EFUSE_DATA3 is the MSB DW.
-
-	/////////////////////////////////////////////////////////////////
-	//read current values of 16-byte block
-	RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
-
-	//Step0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
-	eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0;
-
-	//Step1. Write EFSROM_MODE (0x580, bit7:bit6) to 1.
-	eFuseCtrlStruc.field.EFSROM_MODE = 1;
-
-	//Step2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure.
-	eFuseCtrlStruc.field.EFSROM_KICK = 1;
-
-	NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
-	RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
-
-	//Step3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again.
-	i = 0;
-	while(i < 100)
-	{
-		RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
-
-		if(eFuseCtrlStruc.field.EFSROM_KICK == 0)
-			break;
-		RTMPusecDelay(2);
-		i++;
-	}
-
-	//Step4. Read 16-byte of data from EFUSE_DATA0-3 (0x59C-0x590)
-	efuseDataOffset =  EFUSE_DATA3;
-	for(i=0; i< 4; i++)
-	{
-		RTMP_IO_READ32(pAd, efuseDataOffset, (PUINT32) &eFuseDataBuffer[i]);
-		efuseDataOffset -=  4;
-	}
-
-	//Update the value, the offset is multiple of 2, length is 2
-	efuseDataOffset = (Offset & 0xc) >> 2;
-	data = pData[0] & 0xffff;
-	//The offset should be 0x***10 or 0x***00
-	if((Offset % 4) != 0)
-	{
-		eFuseDataBuffer[efuseDataOffset] = (eFuseDataBuffer[efuseDataOffset] & 0xffff) | (data << 16);
-	}
-	else
-	{
-		eFuseDataBuffer[efuseDataOffset] = (eFuseDataBuffer[efuseDataOffset] & 0xffff0000) | data;
-	}
-
-	efuseDataOffset =  EFUSE_DATA3;
-	for(i=0; i< 4; i++)
-	{
-		RTMP_IO_WRITE32(pAd, efuseDataOffset, eFuseDataBuffer[i]);
-		efuseDataOffset -= 4;
-	}
-	/////////////////////////////////////////////////////////////////
-
-	//Step1. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
-	eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0;
-
-	//Step2. Write EFSROM_MODE (0x580, bit7:bit6) to 3.
-	eFuseCtrlStruc.field.EFSROM_MODE = 3;
-
-	//Step3. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical write procedure.
-	eFuseCtrlStruc.field.EFSROM_KICK = 1;
-
-	NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
-	RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
-
-	//Step4. Polling EFSROM_KICK(0x580, bit30) until it become 0 again. It¡¦s done.
-	i = 0;
-	while(i < 100)
-	{
-		RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
-
-		if(eFuseCtrlStruc.field.EFSROM_KICK == 0)
-			break;
-
-		RTMPusecDelay(2);
-		i++;
-	}
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-NTSTATUS eFuseWriteRegisters(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT Offset,
-	IN	USHORT Length,
-	IN	USHORT* pData)
-{
-	USHORT	i;
-	USHORT	eFuseData;
-	USHORT	LogicalAddress, BlkNum = 0xffff;
-	UCHAR	EFSROM_AOUT;
-
-	USHORT addr,tmpaddr, InBuf[3], tmpOffset;
-	USHORT buffer[8];
-	BOOLEAN		bWriteSuccess = TRUE;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters Offset=%x, pData=%x\n", Offset, *pData));
-
-	//Step 0. find the entry in the mapping table
-	//The address of EEPROM is 2-bytes alignment.
-	//The last bit is used for alignment, so it must be 0.
-	tmpOffset = Offset & 0xfffe;
-	EFSROM_AOUT = eFuseReadRegisters(pAd, tmpOffset, 2, &eFuseData);
-
-	if( EFSROM_AOUT == 0x3f)
-	{	//find available logical address pointer
-		//the logical address does not exist, find an empty one
-		//from the first address of block 45=16*45=0x2d0 to the last address of block 47
-		//==>48*16-3(reserved)=2FC
-		for (i=EFUSE_USAGE_MAP_START; i<=EFUSE_USAGE_MAP_END; i+=2)
-		{
-			//Retrive the logical block nubmer form each logical address pointer
-			//It will access two logical address pointer each time.
-			eFusePhysicalReadRegisters(pAd, i, 2, &LogicalAddress);
-			if( (LogicalAddress & 0xff) == 0)
-			{//Not used logical address pointer
-				BlkNum = i-EFUSE_USAGE_MAP_START;
-				break;
-			}
-			else if(( (LogicalAddress >> 8) & 0xff) == 0)
-			{//Not used logical address pointer
-				if (i != EFUSE_USAGE_MAP_END)
-				{
-					BlkNum = i-EFUSE_USAGE_MAP_START+1;
-				}
-				break;
-			}
-		}
-	}
-	else
-	{
-		BlkNum = EFSROM_AOUT;
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters BlkNum = %d \n", BlkNum));
-
-	if(BlkNum == 0xffff)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters: out of free E-fuse space!!!\n"));
-		return FALSE;
-	}
-
-	//Step 1. Save data of this block	which is pointed by the avaible logical address pointer
-	// read and save the original block data
-	for(i =0; i<8; i++)
-	{
-		addr = BlkNum * 0x10 ;
-
-		InBuf[0] = addr+2*i;
-		InBuf[1] = 2;
-		InBuf[2] = 0x0;
-
-		eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
-
-		buffer[i] = InBuf[2];
-	}
-
-	//Step 2. Update the data in buffer, and write the data to Efuse
-	buffer[ (Offset >> 1) % 8] = pData[0];
-
-	do
-	{
-		//Step 3. Write the data to Efuse
-		if(!bWriteSuccess)
-		{
-			for(i =0; i<8; i++)
-			{
-				addr = BlkNum * 0x10 ;
-
-				InBuf[0] = addr+2*i;
-				InBuf[1] = 2;
-				InBuf[2] = buffer[i];
-
-				eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 2);
-			}
-		}
-		else
-		{
-				addr = BlkNum * 0x10 ;
-
-				InBuf[0] = addr+(Offset % 16);
-				InBuf[1] = 2;
-				InBuf[2] = pData[0];
-
-				eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 2);
-		}
-
-		//Step 4. Write mapping table
-		addr = EFUSE_USAGE_MAP_START+BlkNum;
-
-		tmpaddr = addr;
-
-		if(addr % 2 != 0)
-			addr = addr -1;
-		InBuf[0] = addr;
-		InBuf[1] = 2;
-
-		//convert the address from 10 to 8 bit ( bit7, 6 = parity and bit5 ~ 0 = bit9~4), and write to logical map entry
-		tmpOffset = Offset;
-		tmpOffset >>= 4;
-		tmpOffset |= ((~((tmpOffset & 0x01) ^ ( tmpOffset >> 1 & 0x01) ^  (tmpOffset >> 2 & 0x01) ^  (tmpOffset >> 3 & 0x01))) << 6) & 0x40;
-		tmpOffset |= ((~( (tmpOffset >> 2 & 0x01) ^ (tmpOffset >> 3 & 0x01) ^ (tmpOffset >> 4 & 0x01) ^ ( tmpOffset >> 5 & 0x01))) << 7) & 0x80;
-
-		// write the logical address
-		if(tmpaddr%2 != 0)
-			InBuf[2] = tmpOffset<<8;
-		else
-			InBuf[2] = tmpOffset;
-
-		eFuseWritePhysical(pAd,&InBuf[0], 6, NULL, 0);
-
-		//Step 5. Compare data if not the same, invalidate the mapping entry, then re-write the data until E-fuse is exhausted
-		bWriteSuccess = TRUE;
-		for(i =0; i<8; i++)
-		{
-			addr = BlkNum * 0x10 ;
-
-			InBuf[0] = addr+2*i;
-			InBuf[1] = 2;
-			InBuf[2] = 0x0;
-
-			eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
-
-			if(buffer[i] != InBuf[2])
-			{
-				bWriteSuccess = FALSE;
-				break;
-			}
-		}
-
-		//Step 6. invlidate mapping entry and find a free mapping entry if not succeed
-		if (!bWriteSuccess)
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("Not bWriteSuccess BlkNum = %d\n", BlkNum));
-
-			// the offset of current mapping entry
-			addr = EFUSE_USAGE_MAP_START+BlkNum;
-
-			//find a new mapping entry
-			BlkNum = 0xffff;
-			for (i=EFUSE_USAGE_MAP_START; i<=EFUSE_USAGE_MAP_END; i+=2)
-			{
-				eFusePhysicalReadRegisters(pAd, i, 2, &LogicalAddress);
-				if( (LogicalAddress & 0xff) == 0)
-				{
-					BlkNum = i-EFUSE_USAGE_MAP_START;
-					break;
-				}
-				else if(( (LogicalAddress >> 8) & 0xff) == 0)
-				{
-					if (i != EFUSE_USAGE_MAP_END)
-					{
-						BlkNum = i+1-EFUSE_USAGE_MAP_START;
-					}
-					break;
-				}
-			}
-			DBGPRINT(RT_DEBUG_TRACE, ("Not bWriteSuccess new BlkNum = %d\n", BlkNum));
-			if(BlkNum == 0xffff)
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters: out of free E-fuse space!!!\n"));
-				return FALSE;
-			}
-
-			//invalidate the original mapping entry if new entry is not found
-			tmpaddr = addr;
-
-			if(addr % 2 != 0)
-				addr = addr -1;
-			InBuf[0] = addr;
-			InBuf[1] = 2;
-
-			eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
-
-			// write the logical address
-			if(tmpaddr%2 != 0)
-			{
-				// Invalidate the high byte
-				for (i=8; i<15; i++)
-				{
-					if( ( (InBuf[2] >> i) & 0x01) == 0)
-					{
-						InBuf[2] |= (0x1 <<i);
-						break;
-					}
-				}
-			}
-			else
-			{
-				// invalidate the low byte
-				for (i=0; i<8; i++)
-				{
-					if( ( (InBuf[2] >> i) & 0x01) == 0)
-					{
-						InBuf[2] |= (0x1 <<i);
-						break;
-					}
-				}
-			}
-			eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 0);
-		}
-	}
-	while(!bWriteSuccess);
-
-	return TRUE;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-VOID eFuseWritePhysical(
-	IN	PRTMP_ADAPTER	pAd,
-  	PUSHORT lpInBuffer,
-	ULONG nInBufferSize,
-  	PUCHAR lpOutBuffer,
-  	ULONG nOutBufferSize
-)
-{
-	USHORT* pInBuf = (USHORT*)lpInBuffer;
-	int 		i;
-	//USHORT* pOutBuf = (USHORT*)ioBuffer;
-
-	USHORT Offset = pInBuf[0];					//addr
-	USHORT Length = pInBuf[1];					//length
-	USHORT* pValueX = &pInBuf[2];				//value ...
-		// Little-endian		S	|	S	Big-endian
-		// addr	3	2	1	0	|	0	1	2	3
-		// Ori-V	D	C	B	A	|	A	B	C	D
-		//After swapping
-		//		D	C	B	A	|	D	C	B	A
-		//Both the little and big-endian use the same sequence to write  data.
-		//Therefore, we only need swap data when read the data.
-	for(i=0; i<Length; i+=2)
-	{
-		eFusePhysicalWriteRegisters(pAd, Offset+i, 2, &pValueX[i/2]);
-	}
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-NTSTATUS eFuseWrite(
-   	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT			Offset,
-	IN	PUCHAR			pData,
-	IN	USHORT			length)
-{
-	int i;
-
-	USHORT* pValueX = (PUSHORT) pData;				//value ...
-		//The input value=3070 will be stored as following
- 		// Little-endian		S	|	S	Big-endian
-		// addr			1	0	|	0	1
-		// Ori-V			30	70	|	30	70
-		//After swapping
-		//				30	70	|	70	30
-		//Casting
-		//				3070	|	7030 (x)
-		//The swapping should be removed for big-endian
-	for(i=0; i<length; i+=2)
-	{
-		eFuseWriteRegisters(pAd, Offset+i, 2, &pValueX[i/2]);
-	}
-
-	return TRUE;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-INT set_eFuseGetFreeBlockCount_Proc(
-   	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	USHORT i;
-	USHORT	LogicalAddress;
-	USHORT efusefreenum=0;
-	if(!pAd->bUseEfuse)
-		return FALSE;
-	for (i = EFUSE_USAGE_MAP_START; i <= EFUSE_USAGE_MAP_END; i+=2)
-	{
-		eFusePhysicalReadRegisters(pAd, i, 2, &LogicalAddress);
-		if( (LogicalAddress & 0xff) == 0)
-		{
-			efusefreenum= (UCHAR) (EFUSE_USAGE_MAP_END-i+1);
-			break;
-		}
-		else if(( (LogicalAddress >> 8) & 0xff) == 0)
-		{
-			efusefreenum = (UCHAR) (EFUSE_USAGE_MAP_END-i);
-			break;
-		}
-
-		if(i == EFUSE_USAGE_MAP_END)
-			efusefreenum = 0;
-	}
-	printk("efuseFreeNumber is %d\n",efusefreenum);
-	return TRUE;
-}
-INT set_eFusedump_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-USHORT InBuf[3];
-	INT i=0;
-	if(!pAd->bUseEfuse)
-		return FALSE;
-	for(i =0; i<EFUSE_USAGE_MAP_END/2; i++)
-	{
-		InBuf[0] = 2*i;
-		InBuf[1] = 2;
-		InBuf[2] = 0x0;
-
-		eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
-		if(i%4==0)
-		printk("\nBlock %x:",i/8);
-		printk("%04x ",InBuf[2]);
-	}
-	return TRUE;
-}
-INT	set_eFuseLoadFromBin_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR					*src;
-	struct file				*srcf;
-	INT 					retval, orgfsuid, orgfsgid;
-   	mm_segment_t			orgfs;
-	UCHAR					*buffer;
-	UCHAR					BinFileSize=0;
-	INT						i = 0,j=0,k=1;
-	USHORT					*PDATA;
-	USHORT					DATA;
-	BinFileSize=strlen("RT30xxEEPROM.bin");
-	src = kmalloc(128, MEM_ALLOC_FLAG);
-	NdisZeroMemory(src, 128);
-
- 	if(strlen(arg)>0)
-	{
-
-		NdisMoveMemory(src, arg, strlen(arg));
- 	}
-
-	else
-	{
-
-		NdisMoveMemory(src, "RT30xxEEPROM.bin", BinFileSize);
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("FileName=%s\n",src));
-	buffer = kmalloc(MAX_EEPROM_BIN_FILE_SIZE, MEM_ALLOC_FLAG);
-
-	if(buffer == NULL)
-	{
-		kfree(src);
-		 return FALSE;
-}
-	PDATA=kmalloc(sizeof(USHORT)*8,MEM_ALLOC_FLAG);
-
-	if(PDATA==NULL)
-	{
-		kfree(src);
-
-		kfree(buffer);
-		return FALSE;
-	}
-	/* Don't change to uid 0, let the file be opened as the "normal" user */
-#if 0
-	orgfsuid = current->fsuid;
-	orgfsgid = current->fsgid;
-	current->fsuid=current->fsgid = 0;
-#endif
-    	orgfs = get_fs();
-   	 set_fs(KERNEL_DS);
-
-	if (src && *src)
-	{
-		srcf = filp_open(src, O_RDONLY, 0);
-		if (IS_ERR(srcf))
-		{
-			DBGPRINT(RT_DEBUG_ERROR, ("--> Error %ld opening %s\n", -PTR_ERR(srcf),src));
-			return FALSE;
-		}
-		else
-		{
-			// The object must have a read method
-			if (srcf->f_op && srcf->f_op->read)
-			{
-				memset(buffer, 0x00, MAX_EEPROM_BIN_FILE_SIZE);
-				while(srcf->f_op->read(srcf, &buffer[i], 1, &srcf->f_pos)==1)
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("%02X ",buffer[i]));
-					if((i+1)%8==0)
-						DBGPRINT(RT_DEBUG_TRACE, ("\n"));
-              			i++;
-						if(i>=MAX_EEPROM_BIN_FILE_SIZE)
-							{
-								DBGPRINT(RT_DEBUG_ERROR, ("--> Error %ld reading %s, The file is too large[1024]\n", -PTR_ERR(srcf),src));
-								kfree(PDATA);
-								kfree(buffer);
-								kfree(src);
-								return FALSE;
-							}
-			       }
-			}
-			else
-			{
-						DBGPRINT(RT_DEBUG_ERROR, ("--> Error!! System doest not support read function\n"));
-						kfree(PDATA);
-						kfree(buffer);
-						kfree(src);
-						return FALSE;
-			}
-      		}
-
-
-	}
-	else
-		{
-					DBGPRINT(RT_DEBUG_ERROR, ("--> Error src  or srcf is null\n"));
-					kfree(PDATA);
-					kfree(buffer);
-					return FALSE;
-
-		}
-
-
-	retval=filp_close(srcf,NULL);
-
-	if (retval)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("--> Error %d closing %s\n", -retval, src));
-	}
-	set_fs(orgfs);
-#if 0
-	current->fsuid = orgfsuid;
-	current->fsgid = orgfsgid;
-#endif
-	for(j=0;j<i;j++)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("%02X ",buffer[j]));
-		if((j+1)%2==0)
-			PDATA[j/2%8]=((buffer[j]<<8)&0xff00)|(buffer[j-1]&0xff);
-		if(j%16==0)
-		{
-			k=buffer[j];
-		}
-		else
-		{
-			k&=buffer[j];
-			if((j+1)%16==0)
-			{
-
-				DBGPRINT(RT_DEBUG_TRACE, (" result=%02X,blk=%02x\n",k,j/16));
-
-				if(k!=0xff)
-					eFuseWriteRegistersFromBin(pAd,(USHORT)j-15, 16, PDATA);
-				else
-					{
-						if(eFuseReadRegisters(pAd,j, 2,(PUSHORT)&DATA)!=0x3f)
-							eFuseWriteRegistersFromBin(pAd,(USHORT)j-15, 16, PDATA);
-					}
-				/*
-				for(l=0;l<8;l++)
-					printk("%04x ",PDATA[l]);
-				printk("\n");
-				*/
-				NdisZeroMemory(PDATA,16);
-
-
-			}
-		}
-
-
-	}
-
-
-	kfree(PDATA);
-	kfree(buffer);
-	kfree(src);
-	return TRUE;
-}
-NTSTATUS eFuseWriteRegistersFromBin(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT Offset,
-	IN	USHORT Length,
-	IN	USHORT* pData)
-{
-	USHORT	i;
-	USHORT	eFuseData;
-	USHORT	LogicalAddress, BlkNum = 0xffff;
-	UCHAR	EFSROM_AOUT,Loop=0;
-	EFUSE_CTRL_STRUC		eFuseCtrlStruc;
-	USHORT	efuseDataOffset;
-	UINT32	data,tempbuffer;
-	USHORT addr,tmpaddr, InBuf[3], tmpOffset;
-	UINT32 buffer[4];
-	BOOLEAN		bWriteSuccess = TRUE;
-	BOOLEAN		bNotWrite=TRUE;
-	BOOLEAN		bAllocateNewBlk=TRUE;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegistersFromBin Offset=%x, pData=%04x:%04x:%04x:%04x\n", Offset, *pData,*(pData+1),*(pData+2),*(pData+3)));
-
-	do
-	{
-	//Step 0. find the entry in the mapping table
-	//The address of EEPROM is 2-bytes alignment.
-	//The last bit is used for alignment, so it must be 0.
-	Loop++;
-	tmpOffset = Offset & 0xfffe;
-	EFSROM_AOUT = eFuseReadRegisters(pAd, tmpOffset, 2, &eFuseData);
-
-	if( EFSROM_AOUT == 0x3f)
-	{	//find available logical address pointer
-		//the logical address does not exist, find an empty one
-		//from the first address of block 45=16*45=0x2d0 to the last address of block 47
-		//==>48*16-3(reserved)=2FC
-		bAllocateNewBlk=TRUE;
-		for (i=EFUSE_USAGE_MAP_START; i<=EFUSE_USAGE_MAP_END; i+=2)
-		{
-			//Retrive the logical block nubmer form each logical address pointer
-			//It will access two logical address pointer each time.
-			eFusePhysicalReadRegisters(pAd, i, 2, &LogicalAddress);
-			if( (LogicalAddress & 0xff) == 0)
-			{//Not used logical address pointer
-				BlkNum = i-EFUSE_USAGE_MAP_START;
-				break;
-			}
-			else if(( (LogicalAddress >> 8) & 0xff) == 0)
-			{//Not used logical address pointer
-				if (i != EFUSE_USAGE_MAP_END)
-				{
-					BlkNum = i-EFUSE_USAGE_MAP_START+1;
-				}
-				break;
-			}
-		}
-	}
-	else
-	{
-		bAllocateNewBlk=FALSE;
-		BlkNum = EFSROM_AOUT;
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters BlkNum = %d \n", BlkNum));
-
-	if(BlkNum == 0xffff)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters: out of free E-fuse space!!!\n"));
-		return FALSE;
-	}
-	//Step 1.1.0
-	//If the block is not existing in mapping table, create one
-	//and write down the 16-bytes data to the new block
-	if(bAllocateNewBlk)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("Allocate New Blk\n"));
-		efuseDataOffset =  EFUSE_DATA3;
-		for(i=0; i< 4; i++)
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("Allocate New Blk, Data%d=%04x%04x\n",3-i,pData[2*i+1],pData[2*i]));
-			tempbuffer=((pData[2*i+1]<<16)&0xffff0000)|pData[2*i];
-
-
-			RTMP_IO_WRITE32(pAd, efuseDataOffset,tempbuffer);
-			efuseDataOffset -= 4;
-
-		}
-		/////////////////////////////////////////////////////////////////
-
-		//Step1.1.1. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
-		eFuseCtrlStruc.field.EFSROM_AIN = BlkNum* 0x10 ;
-
-		//Step1.1.2. Write EFSROM_MODE (0x580, bit7:bit6) to 3.
-		eFuseCtrlStruc.field.EFSROM_MODE = 3;
-
-		//Step1.1.3. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical write procedure.
-		eFuseCtrlStruc.field.EFSROM_KICK = 1;
-
-		NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
-
-		RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
-
-		//Step1.1.4. Polling EFSROM_KICK(0x580, bit30) until it become 0 again. It¡¦s done.
-		i = 0;
-		while(i < 100)
-		{
-			RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
-
-			if(eFuseCtrlStruc.field.EFSROM_KICK == 0)
-				break;
-
-			RTMPusecDelay(2);
-			i++;
-		}
-
-	}
-	else
-	{	//Step1.2.
-		//If the same logical number is existing, check if the writting data and the data
-		//saving in this block are the same.
-		/////////////////////////////////////////////////////////////////
-		//read current values of 16-byte block
-		RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
-
-		//Step1.2.0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
-		eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0;
-
-		//Step1.2.1. Write EFSROM_MODE (0x580, bit7:bit6) to 1.
-		eFuseCtrlStruc.field.EFSROM_MODE = 0;
-
-		//Step1.2.2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure.
-		eFuseCtrlStruc.field.EFSROM_KICK = 1;
-
-		NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
-		RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
-
-		//Step1.2.3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again.
-		i = 0;
-		while(i < 100)
-		{
-			RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
-
-			if(eFuseCtrlStruc.field.EFSROM_KICK == 0)
-				break;
-			RTMPusecDelay(2);
-			i++;
-		}
-
-		//Step1.2.4. Read 16-byte of data from EFUSE_DATA0-3 (0x59C-0x590)
-		efuseDataOffset =  EFUSE_DATA3;
-		for(i=0; i< 4; i++)
-		{
-			RTMP_IO_READ32(pAd, efuseDataOffset, (PUINT32) &buffer[i]);
-			efuseDataOffset -=  4;
-		}
-		//Step1.2.5. Check if the data of efuse and the writing data are the same.
-		for(i =0; i<4; i++)
-		{
-			tempbuffer=((pData[2*i+1]<<16)&0xffff0000)|pData[2*i];
-			DBGPRINT(RT_DEBUG_TRACE, ("buffer[%d]=%x,pData[%d]=%x,pData[%d]=%x,tempbuffer=%x\n",i,buffer[i],2*i,pData[2*i],2*i+1,pData[2*i+1],tempbuffer));
-
-			if(((buffer[i]&0xffff0000)==(pData[2*i+1]<<16))&&((buffer[i]&0xffff)==pData[2*i]))
-				bNotWrite&=TRUE;
-			else
-			{
-				bNotWrite&=FALSE;
-				break;
-			}
-		}
-		if(!bNotWrite)
-		{
-		printk("The data is not the same\n");
-
-			for(i =0; i<8; i++)
-			{
-				addr = BlkNum * 0x10 ;
-
-				InBuf[0] = addr+2*i;
-				InBuf[1] = 2;
-				InBuf[2] = pData[i];
-
-				eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 2);
-			}
-
-		}
-		else
-			return TRUE;
-	     }
-
-
-
-		//Step 2. Write mapping table
-		addr = EFUSE_USAGE_MAP_START+BlkNum;
-
-		tmpaddr = addr;
-
-		if(addr % 2 != 0)
-			addr = addr -1;
-		InBuf[0] = addr;
-		InBuf[1] = 2;
-
-		//convert the address from 10 to 8 bit ( bit7, 6 = parity and bit5 ~ 0 = bit9~4), and write to logical map entry
-		tmpOffset = Offset;
-		tmpOffset >>= 4;
-		tmpOffset |= ((~((tmpOffset & 0x01) ^ ( tmpOffset >> 1 & 0x01) ^  (tmpOffset >> 2 & 0x01) ^  (tmpOffset >> 3 & 0x01))) << 6) & 0x40;
-		tmpOffset |= ((~( (tmpOffset >> 2 & 0x01) ^ (tmpOffset >> 3 & 0x01) ^ (tmpOffset >> 4 & 0x01) ^ ( tmpOffset >> 5 & 0x01))) << 7) & 0x80;
-
-		// write the logical address
-		if(tmpaddr%2 != 0)
-			InBuf[2] = tmpOffset<<8;
-		else
-			InBuf[2] = tmpOffset;
-
-		eFuseWritePhysical(pAd,&InBuf[0], 6, NULL, 0);
-
-		//Step 3. Compare data if not the same, invalidate the mapping entry, then re-write the data until E-fuse is exhausted
-		bWriteSuccess = TRUE;
-		for(i =0; i<8; i++)
-		{
-			addr = BlkNum * 0x10 ;
-
-			InBuf[0] = addr+2*i;
-			InBuf[1] = 2;
-			InBuf[2] = 0x0;
-
-			eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
-			DBGPRINT(RT_DEBUG_TRACE, ("addr=%x, buffer[i]=%x,InBuf[2]=%x\n",InBuf[0],pData[i],InBuf[2]));
-			if(pData[i] != InBuf[2])
-			{
-				bWriteSuccess = FALSE;
-				break;
-			}
-		}
-
-		//Step 4. invlidate mapping entry and find a free mapping entry if not succeed
-
-		if (!bWriteSuccess&&Loop<2)
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegistersFromBin::Not bWriteSuccess BlkNum = %d\n", BlkNum));
-
-			// the offset of current mapping entry
-			addr = EFUSE_USAGE_MAP_START+BlkNum;
-
-			//find a new mapping entry
-			BlkNum = 0xffff;
-			for (i=EFUSE_USAGE_MAP_START; i<=EFUSE_USAGE_MAP_END; i+=2)
-			{
-				eFusePhysicalReadRegisters(pAd, i, 2, &LogicalAddress);
-				if( (LogicalAddress & 0xff) == 0)
-				{
-					BlkNum = i-EFUSE_USAGE_MAP_START;
-					break;
-				}
-				else if(( (LogicalAddress >> 8) & 0xff) == 0)
-				{
-					if (i != EFUSE_USAGE_MAP_END)
-					{
-						BlkNum = i+1-EFUSE_USAGE_MAP_START;
-					}
-					break;
-				}
-			}
-			DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegistersFromBin::Not bWriteSuccess new BlkNum = %d\n", BlkNum));
-			if(BlkNum == 0xffff)
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegistersFromBin: out of free E-fuse space!!!\n"));
-				return FALSE;
-			}
-
-			//invalidate the original mapping entry if new entry is not found
-			tmpaddr = addr;
-
-			if(addr % 2 != 0)
-				addr = addr -1;
-			InBuf[0] = addr;
-			InBuf[1] = 2;
-
-			eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
-
-			// write the logical address
-			if(tmpaddr%2 != 0)
-			{
-				// Invalidate the high byte
-				for (i=8; i<15; i++)
-				{
-					if( ( (InBuf[2] >> i) & 0x01) == 0)
-					{
-						InBuf[2] |= (0x1 <<i);
-						break;
-					}
-				}
-			}
-			else
-			{
-				// invalidate the low byte
-				for (i=0; i<8; i++)
-				{
-					if( ( (InBuf[2] >> i) & 0x01) == 0)
-					{
-						InBuf[2] |= (0x1 <<i);
-						break;
-					}
-				}
-			}
-			eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 0);
-		}
-
-	}
-	while(!bWriteSuccess&&Loop<2);
-
-	return TRUE;
-}
-
-#endif // RT30xx //
-//2008/09/11:KH add to support efuse-->
-
+#include "../../rt2870/common/eeprom.c"
diff --git a/drivers/staging/rt3070/common/md5.c b/drivers/staging/rt3070/common/md5.c
index 774776b4b8c..07528842267 100644
--- a/drivers/staging/rt3070/common/md5.c
+++ b/drivers/staging/rt3070/common/md5.c
@@ -1,1427 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-    md5.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Name		Date			Modification logs
-	jan			10-28-03		Initial
-	Rita    	11-23-04		Modify MD5 and SHA-1
-	Rita		10-14-05		Modify SHA-1 in big-endian platform
- */
-#include "../rt_config.h"
-
-/**
- * md5_mac:
- * @key: pointer to	the	key	used for MAC generation
- * @key_len: length	of the key in bytes
- * @data: pointer to the data area for which the MAC is	generated
- * @data_len: length of	the	data in	bytes
- * @mac: pointer to	the	buffer holding space for the MAC; the buffer should
- * have	space for 128-bit (16 bytes) MD5 hash value
- *
- * md5_mac() determines	the	message	authentication code	by using secure	hash
- * MD5(key | data |	key).
- */
-void md5_mac(u8 *key, size_t key_len, u8 *data, size_t data_len, u8 *mac)
-{
-	MD5_CTX	context;
-
-	MD5Init(&context);
-	MD5Update(&context,	key, key_len);
-	MD5Update(&context,	data, data_len);
-	MD5Update(&context,	key, key_len);
-	MD5Final(mac, &context);
-}
-
-/**
- * hmac_md5:
- * @key: pointer to	the	key	used for MAC generation
- * @key_len: length	of the key in bytes
- * @data: pointer to the data area for which the MAC is	generated
- * @data_len: length of	the	data in	bytes
- * @mac: pointer to	the	buffer holding space for the MAC; the buffer should
- * have	space for 128-bit (16 bytes) MD5 hash value
- *
- * hmac_md5() determines the message authentication	code using HMAC-MD5.
- * This	implementation is based	on the sample code presented in	RFC	2104.
- */
-void hmac_md5(u8 *key, size_t key_len, u8 *data, size_t data_len, u8 *mac)
-{
-	MD5_CTX	context;
-    u8 k_ipad[65]; /* inner padding - key XORd with ipad */
-    u8 k_opad[65]; /* outer padding - key XORd with opad */
-    u8 tk[16];
-	int	i;
-
-	//assert(key != NULL && data != NULL && mac != NULL);
-
-	/* if key is longer	than 64	bytes reset	it to key =	MD5(key) */
-	if (key_len	> 64) {
-		MD5_CTX	ttcontext;
-
-		MD5Init(&ttcontext);
-		MD5Update(&ttcontext, key, key_len);
-		MD5Final(tk, &ttcontext);
-		//key=(PUCHAR)ttcontext.buf;
-		key	= tk;
-		key_len	= 16;
-	}
-
-	/* the HMAC_MD5	transform looks	like:
-	 *
-	 * MD5(K XOR opad, MD5(K XOR ipad, text))
-	 *
-	 * where K is an n byte	key
-	 * ipad	is the byte	0x36 repeated 64 times
-	 * opad	is the byte	0x5c repeated 64 times
-	 * and text	is the data	being protected	*/
-
-	/* start out by	storing	key	in pads	*/
-	NdisZeroMemory(k_ipad, sizeof(k_ipad));
-	NdisZeroMemory(k_opad,	sizeof(k_opad));
-	//assert(key_len < sizeof(k_ipad));
-	NdisMoveMemory(k_ipad, key,	key_len);
-	NdisMoveMemory(k_opad, key,	key_len);
-
-	/* XOR key with	ipad and opad values */
-	for	(i = 0;	i <	64;	i++) {
-		k_ipad[i] ^= 0x36;
-		k_opad[i] ^= 0x5c;
-	}
-
-	/* perform inner MD5 */
-	MD5Init(&context);					 /*	init context for 1st pass */
-	MD5Update(&context,	k_ipad,	64);	 /*	start with inner pad */
-	MD5Update(&context,	data, data_len); /*	then text of datagram */
-	MD5Final(mac, &context);			 /*	finish up 1st pass */
-
-	/* perform outer MD5 */
-	MD5Init(&context);					 /*	init context for 2nd pass */
-	MD5Update(&context,	k_opad,	64);	 /*	start with outer pad */
-	MD5Update(&context,	mac, 16);		 /*	then results of	1st	hash */
-	MD5Final(mac, &context);			 /*	finish up 2nd pass */
-}
-
-#ifndef RT_BIG_ENDIAN
-#define byteReverse(buf, len)   /* Nothing */
-#else
-void byteReverse(unsigned char *buf, unsigned longs);
-void byteReverse(unsigned char *buf, unsigned longs)
-{
-    do {
-        *(UINT32 *)buf = SWAP32(*(UINT32 *)buf);
-        buf += 4;
-    } while (--longs);
-}
-#endif
-
-
-/* ==========================  MD5 implementation =========================== */
-// four base functions for MD5
-#define MD5_F1(x, y, z) (((x) & (y)) | ((~x) & (z)))
-#define MD5_F2(x, y, z) (((x) & (z)) | ((y) & (~z)))
-#define MD5_F3(x, y, z) ((x) ^ (y) ^ (z))
-#define MD5_F4(x, y, z) ((y) ^ ((x) | (~z)))
-#define CYCLIC_LEFT_SHIFT(w, s) (((w) << (s)) | ((w) >> (32-(s))))
-
-#define	MD5Step(f, w, x, y,	z, data, t, s)	\
-	( w	+= f(x,	y, z) +	data + t,  w = (CYCLIC_LEFT_SHIFT(w, s)) & 0xffffffff, w +=	x )
-
-
-/*
- *  Function Description:
- *      Initiate MD5 Context satisfied in RFC 1321
- *
- *  Arguments:
- *      pCtx        Pointer	to MD5 context
- *
- *  Return Value:
- *      None
- */
-VOID MD5Init(MD5_CTX *pCtx)
-{
-    pCtx->Buf[0]=0x67452301;
-    pCtx->Buf[1]=0xefcdab89;
-    pCtx->Buf[2]=0x98badcfe;
-    pCtx->Buf[3]=0x10325476;
-
-    pCtx->LenInBitCount[0]=0;
-    pCtx->LenInBitCount[1]=0;
-}
-
-
-/*
- *  Function Description:
- *      Update MD5 Context, allow of an arrary of octets as the next portion
- *      of the message
- *
- *  Arguments:
- *      pCtx		Pointer	to MD5 context
- * 	    pData       Pointer to input data
- *      LenInBytes  The length of input data (unit: byte)
- *
- *  Return Value:
- *      None
- *
- *  Note:
- *      Called after MD5Init or MD5Update(itself)
- */
-VOID MD5Update(MD5_CTX *pCtx, UCHAR *pData, UINT32 LenInBytes)
-{
-
-    UINT32 TfTimes;
-    UINT32 temp;
-	unsigned int i;
-
-    temp = pCtx->LenInBitCount[0];
-
-    pCtx->LenInBitCount[0] = (UINT32) (pCtx->LenInBitCount[0] + (LenInBytes << 3));
-
-    if (pCtx->LenInBitCount[0] < temp)
-        pCtx->LenInBitCount[1]++;   //carry in
-
-    pCtx->LenInBitCount[1] += LenInBytes >> 29;
-
-    // mod 64 bytes
-    temp = (temp >> 3) & 0x3f;
-
-    // process lacks of 64-byte data
-    if (temp)
-    {
-        UCHAR *pAds = (UCHAR *) pCtx->Input + temp;
-
-        if ((temp+LenInBytes) < 64)
-        {
-            NdisMoveMemory(pAds, (UCHAR *)pData, LenInBytes);
-            return;
-        }
-
-        NdisMoveMemory(pAds, (UCHAR *)pData, 64-temp);
-        byteReverse(pCtx->Input, 16);
-        MD5Transform(pCtx->Buf, (UINT32 *)pCtx->Input);
-
-        pData += 64-temp;
-        LenInBytes -= 64-temp;
-    } // end of if (temp)
-
-
-    TfTimes = (LenInBytes >> 6);
-
-    for (i=TfTimes; i>0; i--)
-    {
-        NdisMoveMemory(pCtx->Input, (UCHAR *)pData, 64);
-        byteReverse(pCtx->Input, 16);
-        MD5Transform(pCtx->Buf, (UINT32 *)pCtx->Input);
-        pData += 64;
-        LenInBytes -= 64;
-    } // end of for
-
-    // buffering lacks of 64-byte data
-    if(LenInBytes)
-        NdisMoveMemory(pCtx->Input, (UCHAR *)pData, LenInBytes);
-
-}
-
-
-/*
- *  Function Description:
- *      Append padding bits and length of original message in the tail
- *      The message digest has to be completed in the end
- *
- *  Arguments:
- *      Digest		Output of Digest-Message for MD5
- *  	pCtx        Pointer	to MD5 context
- *
- *  Return Value:
- *      None
- *
- *  Note:
- *      Called after MD5Update
- */
-VOID MD5Final(UCHAR Digest[16], MD5_CTX *pCtx)
-{
-    UCHAR Remainder;
-    UCHAR PadLenInBytes;
-    UCHAR *pAppend=0;
-    unsigned int i;
-
-    Remainder = (UCHAR)((pCtx->LenInBitCount[0] >> 3) & 0x3f);
-
-    PadLenInBytes = (Remainder < 56) ? (56-Remainder) : (120-Remainder);
-
-    pAppend = (UCHAR *)pCtx->Input + Remainder;
-
-    // padding bits without crossing block(64-byte based) boundary
-    if (Remainder < 56)
-    {
-        *pAppend = 0x80;
-        PadLenInBytes --;
-
-        NdisZeroMemory((UCHAR *)pCtx->Input + Remainder+1, PadLenInBytes);
-
-		// add data-length field, from low to high
-       	for (i=0; i<4; i++)
-        {
-        	pCtx->Input[56+i] = (UCHAR)((pCtx->LenInBitCount[0] >> (i << 3)) & 0xff);
-        	pCtx->Input[60+i] = (UCHAR)((pCtx->LenInBitCount[1] >> (i << 3)) & 0xff);
-      	}
-
-        byteReverse(pCtx->Input, 16);
-        MD5Transform(pCtx->Buf, (UINT32 *)pCtx->Input);
-    } // end of if
-
-    // padding bits with crossing block(64-byte based) boundary
-    else
-    {
-        // the first block ===
-        *pAppend = 0x80;
-        PadLenInBytes --;
-
-        NdisZeroMemory((UCHAR *)pCtx->Input + Remainder+1, (64-Remainder-1));
-        PadLenInBytes -= (64 - Remainder - 1);
-
-        byteReverse(pCtx->Input, 16);
-        MD5Transform(pCtx->Buf, (UINT32 *)pCtx->Input);
-
-
-        // the second block ===
-        NdisZeroMemory((UCHAR *)pCtx->Input, PadLenInBytes);
-
-        // add data-length field
-        for (i=0; i<4; i++)
-        {
-        	pCtx->Input[56+i] = (UCHAR)((pCtx->LenInBitCount[0] >> (i << 3)) & 0xff);
-        	pCtx->Input[60+i] = (UCHAR)((pCtx->LenInBitCount[1] >> (i << 3)) & 0xff);
-      	}
-
-        byteReverse(pCtx->Input, 16);
-        MD5Transform(pCtx->Buf, (UINT32 *)pCtx->Input);
-    } // end of else
-
-
-    NdisMoveMemory((UCHAR *)Digest, (UINT32 *)pCtx->Buf, 16); // output
-    byteReverse((UCHAR *)Digest, 4);
-    NdisZeroMemory(pCtx, sizeof(pCtx)); // memory free
-}
-
-
-/*
- *  Function Description:
- *      The central algorithm of MD5, consists of four rounds and sixteen
- *  	steps per round
- *
- *  Arguments:
- *      Buf     Buffers of four states (output: 16 bytes)
- * 	    Mes     Input data (input: 64 bytes)
- *
- *  Return Value:
- *      None
- *
- *  Note:
- *      Called by MD5Update or MD5Final
- */
-VOID MD5Transform(UINT32 Buf[4], UINT32 Mes[16])
-{
-    UINT32 Reg[4], Temp;
-	unsigned int i;
-
-    static UCHAR LShiftVal[16] =
-    {
-        7, 12, 17, 22,
-		5, 9 , 14, 20,
-		4, 11, 16, 23,
- 		6, 10, 15, 21,
- 	};
-
-
-	// [equal to 4294967296*abs(sin(index))]
-    static UINT32 MD5Table[64] =
-	{
-		0xd76aa478,	0xe8c7b756,	0x242070db,	0xc1bdceee,
-		0xf57c0faf,	0x4787c62a,	0xa8304613, 0xfd469501,
-		0x698098d8,	0x8b44f7af,	0xffff5bb1,	0x895cd7be,
-    	0x6b901122,	0xfd987193,	0xa679438e,	0x49b40821,
-
-    	0xf61e2562,	0xc040b340,	0x265e5a51,	0xe9b6c7aa,
-    	0xd62f105d,	0x02441453,	0xd8a1e681,	0xe7d3fbc8,
-    	0x21e1cde6,	0xc33707d6,	0xf4d50d87,	0x455a14ed,
-    	0xa9e3e905,	0xfcefa3f8,	0x676f02d9,	0x8d2a4c8a,
-
-    	0xfffa3942,	0x8771f681,	0x6d9d6122,	0xfde5380c,
-    	0xa4beea44,	0x4bdecfa9,	0xf6bb4b60,	0xbebfbc70,
-    	0x289b7ec6,	0xeaa127fa,	0xd4ef3085,	0x04881d05,
-    	0xd9d4d039,	0xe6db99e5,	0x1fa27cf8,	0xc4ac5665,
-
-    	0xf4292244,	0x432aff97,	0xab9423a7,	0xfc93a039,
-   		0x655b59c3,	0x8f0ccc92,	0xffeff47d,	0x85845dd1,
-    	0x6fa87e4f,	0xfe2ce6e0,	0xa3014314,	0x4e0811a1,
-    	0xf7537e82,	0xbd3af235,	0x2ad7d2bb,	0xeb86d391
-	};
-
-
-    for (i=0; i<4; i++)
-        Reg[i]=Buf[i];
-
-
-    // 64 steps in MD5 algorithm
-    for (i=0; i<16; i++)
-    {
-        MD5Step(MD5_F1, Reg[0], Reg[1], Reg[2], Reg[3], Mes[i],
-                MD5Table[i], LShiftVal[i & 0x3]);
-
-        // one-word right shift
-        Temp   = Reg[3];
-        Reg[3] = Reg[2];
-        Reg[2] = Reg[1];
-        Reg[1] = Reg[0];
-        Reg[0] = Temp;
-    }
-    for (i=16; i<32; i++)
-    {
-        MD5Step(MD5_F2, Reg[0], Reg[1], Reg[2], Reg[3], Mes[(5*(i & 0xf)+1) & 0xf],
-                MD5Table[i], LShiftVal[(0x1 << 2)+(i & 0x3)]);
-
-        // one-word right shift
-        Temp   = Reg[3];
-        Reg[3] = Reg[2];
-        Reg[2] = Reg[1];
-        Reg[1] = Reg[0];
-        Reg[0] = Temp;
-    }
-    for (i=32; i<48; i++)
-    {
-        MD5Step(MD5_F3, Reg[0], Reg[1], Reg[2], Reg[3], Mes[(3*(i & 0xf)+5) & 0xf],
-                MD5Table[i], LShiftVal[(0x1 << 3)+(i & 0x3)]);
-
-        // one-word right shift
-        Temp   = Reg[3];
-        Reg[3] = Reg[2];
-        Reg[2] = Reg[1];
-        Reg[1] = Reg[0];
-        Reg[0] = Temp;
-    }
-    for (i=48; i<64; i++)
-    {
-        MD5Step(MD5_F4, Reg[0], Reg[1], Reg[2], Reg[3], Mes[(7*(i & 0xf)) & 0xf],
-                MD5Table[i], LShiftVal[(0x3 << 2)+(i & 0x3)]);
-
-        // one-word right shift
-        Temp   = Reg[3];
-        Reg[3] = Reg[2];
-        Reg[2] = Reg[1];
-        Reg[1] = Reg[0];
-        Reg[0] = Temp;
-    }
-
-
-    // (temporary)output
-    for (i=0; i<4; i++)
-        Buf[i] += Reg[i];
-
-}
-
-
-
-/* =========================  SHA-1 implementation ========================== */
-// four base functions for SHA-1
-#define SHA1_F1(b, c, d)    (((b) & (c)) | ((~b) & (d)))
-#define SHA1_F2(b, c, d)    ((b) ^ (c) ^ (d))
-#define SHA1_F3(b, c, d)    (((b) & (c)) | ((b) & (d)) | ((c) & (d)))
-
-
-#define SHA1Step(f, a, b, c, d, e, w, k)    \
-    ( e	+= ( f(b, c, d) + w + k + CYCLIC_LEFT_SHIFT(a, 5)) & 0xffffffff, \
-      b = CYCLIC_LEFT_SHIFT(b, 30) )
-
-//Initiate SHA-1 Context satisfied in RFC 3174
-VOID SHAInit(SHA_CTX *pCtx)
-{
-    pCtx->Buf[0]=0x67452301;
-    pCtx->Buf[1]=0xefcdab89;
-    pCtx->Buf[2]=0x98badcfe;
-    pCtx->Buf[3]=0x10325476;
-    pCtx->Buf[4]=0xc3d2e1f0;
-
-    pCtx->LenInBitCount[0]=0;
-    pCtx->LenInBitCount[1]=0;
-}
-
-/*
- *  Function Description:
- *      Update SHA-1 Context, allow of an arrary of octets as the next
- *      portion of the message
- *
- *  Arguments:
- *      pCtx		Pointer	to SHA-1 context
- * 	    pData       Pointer to input data
- *      LenInBytes  The length of input data (unit: byte)
- *
- *  Return Value:
- *      error       indicate more than pow(2,64) bits of data
- *
- *  Note:
- *      Called after SHAInit or SHAUpdate(itself)
- */
-UCHAR SHAUpdate(SHA_CTX *pCtx, UCHAR *pData, UINT32 LenInBytes)
-{
-    UINT32 TfTimes;
-    UINT32 temp1,temp2;
-	unsigned int i;
-	UCHAR err=1;
-
-    temp1 = pCtx->LenInBitCount[0];
-    temp2 = pCtx->LenInBitCount[1];
-
-    pCtx->LenInBitCount[0] = (UINT32) (pCtx->LenInBitCount[0] + (LenInBytes << 3));
-    if (pCtx->LenInBitCount[0] < temp1)
-        pCtx->LenInBitCount[1]++;   //carry in
-
-
-    pCtx->LenInBitCount[1] = (UINT32) (pCtx->LenInBitCount[1] +(LenInBytes >> 29));
-    if (pCtx->LenInBitCount[1] < temp2)
-        return (err);   //check total length of original data
-
-
-    // mod 64 bytes
-    temp1 = (temp1 >> 3) & 0x3f;
-
-    // process lacks of 64-byte data
-    if (temp1)
-    {
-        UCHAR *pAds = (UCHAR *) pCtx->Input + temp1;
-
-        if ((temp1+LenInBytes) < 64)
-        {
-            NdisMoveMemory(pAds, (UCHAR *)pData, LenInBytes);
-            return (0);
-        }
-
-        NdisMoveMemory(pAds, (UCHAR *)pData, 64-temp1);
-        byteReverse((UCHAR *)pCtx->Input, 16);
-
-        NdisZeroMemory((UCHAR *)pCtx->Input + 64, 16);
-        SHATransform(pCtx->Buf, (UINT32 *)pCtx->Input);
-
-        pData += 64-temp1;
-        LenInBytes -= 64-temp1;
-    } // end of if (temp1)
-
-
-    TfTimes = (LenInBytes >> 6);
-
-    for (i=TfTimes; i>0; i--)
-    {
-        NdisMoveMemory(pCtx->Input, (UCHAR *)pData, 64);
-        byteReverse((UCHAR *)pCtx->Input, 16);
-
-        NdisZeroMemory((UCHAR *)pCtx->Input + 64, 16);
-        SHATransform(pCtx->Buf, (UINT32 *)pCtx->Input);
-        pData += 64;
-        LenInBytes -= 64;
-    } // end of for
-
-    // buffering lacks of 64-byte data
-    if(LenInBytes)
-        NdisMoveMemory(pCtx->Input, (UCHAR *)pData, LenInBytes);
-
-	return (0);
-
-}
-
-// Append padding bits and length of original message in the tail
-// The message digest has to be completed in the end
-VOID SHAFinal(SHA_CTX *pCtx, UCHAR Digest[20])
-{
-    UCHAR Remainder;
-    UCHAR PadLenInBytes;
-    UCHAR *pAppend=0;
-    unsigned int i;
-
-    Remainder = (UCHAR)((pCtx->LenInBitCount[0] >> 3) & 0x3f);
-
-    pAppend = (UCHAR *)pCtx->Input + Remainder;
-
-    PadLenInBytes = (Remainder < 56) ? (56-Remainder) : (120-Remainder);
-
-    // padding bits without crossing block(64-byte based) boundary
-    if (Remainder < 56)
-    {
-        *pAppend = 0x80;
-        PadLenInBytes --;
-
-        NdisZeroMemory((UCHAR *)pCtx->Input + Remainder+1, PadLenInBytes);
-
-		// add data-length field, from high to low
-        for (i=0; i<4; i++)
-        {
-        	pCtx->Input[56+i] = (UCHAR)((pCtx->LenInBitCount[1] >> ((3-i) << 3)) & 0xff);
-        	pCtx->Input[60+i] = (UCHAR)((pCtx->LenInBitCount[0] >> ((3-i) << 3)) & 0xff);
-      	}
-
-        byteReverse((UCHAR *)pCtx->Input, 16);
-        NdisZeroMemory((UCHAR *)pCtx->Input + 64, 14);
-        SHATransform(pCtx->Buf, (UINT32 *)pCtx->Input);
-    } // end of if
-
-    // padding bits with crossing block(64-byte based) boundary
-    else
-    {
-        // the first block ===
-        *pAppend = 0x80;
-        PadLenInBytes --;
-
-        NdisZeroMemory((UCHAR *)pCtx->Input + Remainder+1, (64-Remainder-1));
-        PadLenInBytes -= (64 - Remainder - 1);
-
-        byteReverse((UCHAR *)pCtx->Input, 16);
-        NdisZeroMemory((UCHAR *)pCtx->Input + 64, 16);
-        SHATransform(pCtx->Buf, (UINT32 *)pCtx->Input);
-
-
-        // the second block ===
-        NdisZeroMemory((UCHAR *)pCtx->Input, PadLenInBytes);
-
-		// add data-length field
-		for (i=0; i<4; i++)
-        {
-        	pCtx->Input[56+i] = (UCHAR)((pCtx->LenInBitCount[1] >> ((3-i) << 3)) & 0xff);
-        	pCtx->Input[60+i] = (UCHAR)((pCtx->LenInBitCount[0] >> ((3-i) << 3)) & 0xff);
-      	}
-
-        byteReverse((UCHAR *)pCtx->Input, 16);
-        NdisZeroMemory((UCHAR *)pCtx->Input + 64, 16);
-        SHATransform(pCtx->Buf, (UINT32 *)pCtx->Input);
-    } // end of else
-
-
-    //Output, bytereverse
-    for (i=0; i<20; i++)
-    {
-        Digest [i] = (UCHAR)(pCtx->Buf[i>>2] >> 8*(3-(i & 0x3)));
-    }
-
-    NdisZeroMemory(pCtx, sizeof(pCtx)); // memory free
-}
-
-
-// The central algorithm of SHA-1, consists of four rounds and
-// twenty steps per round
-VOID SHATransform(UINT32 Buf[5], UINT32 Mes[20])
-{
-    UINT32 Reg[5],Temp;
-	unsigned int i;
-    UINT32 W[80];
-
-    static UINT32 SHA1Table[4] = { 0x5a827999, 0x6ed9eba1,
-                                  0x8f1bbcdc, 0xca62c1d6 };
-
-    Reg[0]=Buf[0];
-	Reg[1]=Buf[1];
-	Reg[2]=Buf[2];
-	Reg[3]=Buf[3];
-	Reg[4]=Buf[4];
-
-    //the first octet of a word is stored in the 0th element, bytereverse
-	for(i = 0; i < 16; i++)
-    {
-    	W[i]  = (Mes[i] >> 24) & 0xff;
-        W[i] |= (Mes[i] >> 8 ) & 0xff00;
-        W[i] |= (Mes[i] << 8 ) & 0xff0000;
-        W[i] |= (Mes[i] << 24) & 0xff000000;
-    }
-
-
-    for	(i = 0; i < 64; i++)
-	    W[16+i] = CYCLIC_LEFT_SHIFT(W[i] ^ W[2+i] ^ W[8+i] ^ W[13+i], 1);
-
-
-    // 80 steps in SHA-1 algorithm
-    for (i=0; i<80; i++)
-    {
-        if (i<20)
-            SHA1Step(SHA1_F1, Reg[0], Reg[1], Reg[2], Reg[3], Reg[4],
-                     W[i], SHA1Table[0]);
-
-        else if (i>=20 && i<40)
-            SHA1Step(SHA1_F2, Reg[0], Reg[1], Reg[2], Reg[3], Reg[4],
-                     W[i], SHA1Table[1]);
-
-		else if (i>=40 && i<60)
-            SHA1Step(SHA1_F3, Reg[0], Reg[1], Reg[2], Reg[3], Reg[4],
-                      W[i], SHA1Table[2]);
-
-        else
-            SHA1Step(SHA1_F2, Reg[0], Reg[1], Reg[2], Reg[3], Reg[4],
-                     W[i], SHA1Table[3]);
-
-
-       // one-word right shift
-		Temp   = Reg[4];
-        Reg[4] = Reg[3];
-        Reg[3] = Reg[2];
-        Reg[2] = Reg[1];
-        Reg[1] = Reg[0];
-        Reg[0] = Temp;
-
-    } // end of for-loop
-
-
-    // (temporary)output
-    for (i=0; i<5; i++)
-        Buf[i] += Reg[i];
-
-}
-
-
-/* =========================  AES En/Decryption ========================== */
-
-/* forward S-box */
-static uint32 FSb[256] =
-{
-	0x63, 0x7C,	0x77, 0x7B,	0xF2, 0x6B,	0x6F, 0xC5,
-	0x30, 0x01,	0x67, 0x2B,	0xFE, 0xD7,	0xAB, 0x76,
-	0xCA, 0x82,	0xC9, 0x7D,	0xFA, 0x59,	0x47, 0xF0,
-	0xAD, 0xD4,	0xA2, 0xAF,	0x9C, 0xA4,	0x72, 0xC0,
-	0xB7, 0xFD,	0x93, 0x26,	0x36, 0x3F,	0xF7, 0xCC,
-	0x34, 0xA5,	0xE5, 0xF1,	0x71, 0xD8,	0x31, 0x15,
-	0x04, 0xC7,	0x23, 0xC3,	0x18, 0x96,	0x05, 0x9A,
-	0x07, 0x12,	0x80, 0xE2,	0xEB, 0x27,	0xB2, 0x75,
-	0x09, 0x83,	0x2C, 0x1A,	0x1B, 0x6E,	0x5A, 0xA0,
-	0x52, 0x3B,	0xD6, 0xB3,	0x29, 0xE3,	0x2F, 0x84,
-	0x53, 0xD1,	0x00, 0xED,	0x20, 0xFC,	0xB1, 0x5B,
-	0x6A, 0xCB,	0xBE, 0x39,	0x4A, 0x4C,	0x58, 0xCF,
-	0xD0, 0xEF,	0xAA, 0xFB,	0x43, 0x4D,	0x33, 0x85,
-	0x45, 0xF9,	0x02, 0x7F,	0x50, 0x3C,	0x9F, 0xA8,
-	0x51, 0xA3,	0x40, 0x8F,	0x92, 0x9D,	0x38, 0xF5,
-	0xBC, 0xB6,	0xDA, 0x21,	0x10, 0xFF,	0xF3, 0xD2,
-	0xCD, 0x0C,	0x13, 0xEC,	0x5F, 0x97,	0x44, 0x17,
-	0xC4, 0xA7,	0x7E, 0x3D,	0x64, 0x5D,	0x19, 0x73,
-	0x60, 0x81,	0x4F, 0xDC,	0x22, 0x2A,	0x90, 0x88,
-	0x46, 0xEE,	0xB8, 0x14,	0xDE, 0x5E,	0x0B, 0xDB,
-	0xE0, 0x32,	0x3A, 0x0A,	0x49, 0x06,	0x24, 0x5C,
-	0xC2, 0xD3,	0xAC, 0x62,	0x91, 0x95,	0xE4, 0x79,
-	0xE7, 0xC8,	0x37, 0x6D,	0x8D, 0xD5,	0x4E, 0xA9,
-	0x6C, 0x56,	0xF4, 0xEA,	0x65, 0x7A,	0xAE, 0x08,
-	0xBA, 0x78,	0x25, 0x2E,	0x1C, 0xA6,	0xB4, 0xC6,
-	0xE8, 0xDD,	0x74, 0x1F,	0x4B, 0xBD,	0x8B, 0x8A,
-	0x70, 0x3E,	0xB5, 0x66,	0x48, 0x03,	0xF6, 0x0E,
-	0x61, 0x35,	0x57, 0xB9,	0x86, 0xC1,	0x1D, 0x9E,
-	0xE1, 0xF8,	0x98, 0x11,	0x69, 0xD9,	0x8E, 0x94,
-	0x9B, 0x1E,	0x87, 0xE9,	0xCE, 0x55,	0x28, 0xDF,
-	0x8C, 0xA1,	0x89, 0x0D,	0xBF, 0xE6,	0x42, 0x68,
-	0x41, 0x99,	0x2D, 0x0F,	0xB0, 0x54,	0xBB, 0x16
-};
-
-/* forward table */
-#define	FT \
-\
-	V(C6,63,63,A5),	V(F8,7C,7C,84),	V(EE,77,77,99),	V(F6,7B,7B,8D),	\
-	V(FF,F2,F2,0D),	V(D6,6B,6B,BD),	V(DE,6F,6F,B1),	V(91,C5,C5,54),	\
-	V(60,30,30,50),	V(02,01,01,03),	V(CE,67,67,A9),	V(56,2B,2B,7D),	\
-	V(E7,FE,FE,19),	V(B5,D7,D7,62),	V(4D,AB,AB,E6),	V(EC,76,76,9A),	\
-	V(8F,CA,CA,45),	V(1F,82,82,9D),	V(89,C9,C9,40),	V(FA,7D,7D,87),	\
-	V(EF,FA,FA,15),	V(B2,59,59,EB),	V(8E,47,47,C9),	V(FB,F0,F0,0B),	\
-	V(41,AD,AD,EC),	V(B3,D4,D4,67),	V(5F,A2,A2,FD),	V(45,AF,AF,EA),	\
-	V(23,9C,9C,BF),	V(53,A4,A4,F7),	V(E4,72,72,96),	V(9B,C0,C0,5B),	\
-	V(75,B7,B7,C2),	V(E1,FD,FD,1C),	V(3D,93,93,AE),	V(4C,26,26,6A),	\
-	V(6C,36,36,5A),	V(7E,3F,3F,41),	V(F5,F7,F7,02),	V(83,CC,CC,4F),	\
-	V(68,34,34,5C),	V(51,A5,A5,F4),	V(D1,E5,E5,34),	V(F9,F1,F1,08),	\
-	V(E2,71,71,93),	V(AB,D8,D8,73),	V(62,31,31,53),	V(2A,15,15,3F),	\
-	V(08,04,04,0C),	V(95,C7,C7,52),	V(46,23,23,65),	V(9D,C3,C3,5E),	\
-	V(30,18,18,28),	V(37,96,96,A1),	V(0A,05,05,0F),	V(2F,9A,9A,B5),	\
-	V(0E,07,07,09),	V(24,12,12,36),	V(1B,80,80,9B),	V(DF,E2,E2,3D),	\
-	V(CD,EB,EB,26),	V(4E,27,27,69),	V(7F,B2,B2,CD),	V(EA,75,75,9F),	\
-	V(12,09,09,1B),	V(1D,83,83,9E),	V(58,2C,2C,74),	V(34,1A,1A,2E),	\
-	V(36,1B,1B,2D),	V(DC,6E,6E,B2),	V(B4,5A,5A,EE),	V(5B,A0,A0,FB),	\
-	V(A4,52,52,F6),	V(76,3B,3B,4D),	V(B7,D6,D6,61),	V(7D,B3,B3,CE),	\
-	V(52,29,29,7B),	V(DD,E3,E3,3E),	V(5E,2F,2F,71),	V(13,84,84,97),	\
-	V(A6,53,53,F5),	V(B9,D1,D1,68),	V(00,00,00,00),	V(C1,ED,ED,2C),	\
-	V(40,20,20,60),	V(E3,FC,FC,1F),	V(79,B1,B1,C8),	V(B6,5B,5B,ED),	\
-	V(D4,6A,6A,BE),	V(8D,CB,CB,46),	V(67,BE,BE,D9),	V(72,39,39,4B),	\
-	V(94,4A,4A,DE),	V(98,4C,4C,D4),	V(B0,58,58,E8),	V(85,CF,CF,4A),	\
-	V(BB,D0,D0,6B),	V(C5,EF,EF,2A),	V(4F,AA,AA,E5),	V(ED,FB,FB,16),	\
-	V(86,43,43,C5),	V(9A,4D,4D,D7),	V(66,33,33,55),	V(11,85,85,94),	\
-	V(8A,45,45,CF),	V(E9,F9,F9,10),	V(04,02,02,06),	V(FE,7F,7F,81),	\
-	V(A0,50,50,F0),	V(78,3C,3C,44),	V(25,9F,9F,BA),	V(4B,A8,A8,E3),	\
-	V(A2,51,51,F3),	V(5D,A3,A3,FE),	V(80,40,40,C0),	V(05,8F,8F,8A),	\
-	V(3F,92,92,AD),	V(21,9D,9D,BC),	V(70,38,38,48),	V(F1,F5,F5,04),	\
-	V(63,BC,BC,DF),	V(77,B6,B6,C1),	V(AF,DA,DA,75),	V(42,21,21,63),	\
-	V(20,10,10,30),	V(E5,FF,FF,1A),	V(FD,F3,F3,0E),	V(BF,D2,D2,6D),	\
-	V(81,CD,CD,4C),	V(18,0C,0C,14),	V(26,13,13,35),	V(C3,EC,EC,2F),	\
-	V(BE,5F,5F,E1),	V(35,97,97,A2),	V(88,44,44,CC),	V(2E,17,17,39),	\
-	V(93,C4,C4,57),	V(55,A7,A7,F2),	V(FC,7E,7E,82),	V(7A,3D,3D,47),	\
-	V(C8,64,64,AC),	V(BA,5D,5D,E7),	V(32,19,19,2B),	V(E6,73,73,95),	\
-	V(C0,60,60,A0),	V(19,81,81,98),	V(9E,4F,4F,D1),	V(A3,DC,DC,7F),	\
-	V(44,22,22,66),	V(54,2A,2A,7E),	V(3B,90,90,AB),	V(0B,88,88,83),	\
-	V(8C,46,46,CA),	V(C7,EE,EE,29),	V(6B,B8,B8,D3),	V(28,14,14,3C),	\
-	V(A7,DE,DE,79),	V(BC,5E,5E,E2),	V(16,0B,0B,1D),	V(AD,DB,DB,76),	\
-	V(DB,E0,E0,3B),	V(64,32,32,56),	V(74,3A,3A,4E),	V(14,0A,0A,1E),	\
-	V(92,49,49,DB),	V(0C,06,06,0A),	V(48,24,24,6C),	V(B8,5C,5C,E4),	\
-	V(9F,C2,C2,5D),	V(BD,D3,D3,6E),	V(43,AC,AC,EF),	V(C4,62,62,A6),	\
-	V(39,91,91,A8),	V(31,95,95,A4),	V(D3,E4,E4,37),	V(F2,79,79,8B),	\
-	V(D5,E7,E7,32),	V(8B,C8,C8,43),	V(6E,37,37,59),	V(DA,6D,6D,B7),	\
-	V(01,8D,8D,8C),	V(B1,D5,D5,64),	V(9C,4E,4E,D2),	V(49,A9,A9,E0),	\
-	V(D8,6C,6C,B4),	V(AC,56,56,FA),	V(F3,F4,F4,07),	V(CF,EA,EA,25),	\
-	V(CA,65,65,AF),	V(F4,7A,7A,8E),	V(47,AE,AE,E9),	V(10,08,08,18),	\
-	V(6F,BA,BA,D5),	V(F0,78,78,88),	V(4A,25,25,6F),	V(5C,2E,2E,72),	\
-	V(38,1C,1C,24),	V(57,A6,A6,F1),	V(73,B4,B4,C7),	V(97,C6,C6,51),	\
-	V(CB,E8,E8,23),	V(A1,DD,DD,7C),	V(E8,74,74,9C),	V(3E,1F,1F,21),	\
-	V(96,4B,4B,DD),	V(61,BD,BD,DC),	V(0D,8B,8B,86),	V(0F,8A,8A,85),	\
-	V(E0,70,70,90),	V(7C,3E,3E,42),	V(71,B5,B5,C4),	V(CC,66,66,AA),	\
-	V(90,48,48,D8),	V(06,03,03,05),	V(F7,F6,F6,01),	V(1C,0E,0E,12),	\
-	V(C2,61,61,A3),	V(6A,35,35,5F),	V(AE,57,57,F9),	V(69,B9,B9,D0),	\
-	V(17,86,86,91),	V(99,C1,C1,58),	V(3A,1D,1D,27),	V(27,9E,9E,B9),	\
-	V(D9,E1,E1,38),	V(EB,F8,F8,13),	V(2B,98,98,B3),	V(22,11,11,33),	\
-	V(D2,69,69,BB),	V(A9,D9,D9,70),	V(07,8E,8E,89),	V(33,94,94,A7),	\
-	V(2D,9B,9B,B6),	V(3C,1E,1E,22),	V(15,87,87,92),	V(C9,E9,E9,20),	\
-	V(87,CE,CE,49),	V(AA,55,55,FF),	V(50,28,28,78),	V(A5,DF,DF,7A),	\
-	V(03,8C,8C,8F),	V(59,A1,A1,F8),	V(09,89,89,80),	V(1A,0D,0D,17),	\
-	V(65,BF,BF,DA),	V(D7,E6,E6,31),	V(84,42,42,C6),	V(D0,68,68,B8),	\
-	V(82,41,41,C3),	V(29,99,99,B0),	V(5A,2D,2D,77),	V(1E,0F,0F,11),	\
-	V(7B,B0,B0,CB),	V(A8,54,54,FC),	V(6D,BB,BB,D6),	V(2C,16,16,3A)
-
-#define	V(a,b,c,d) 0x##a##b##c##d
-static uint32 FT0[256] = { FT };
-#undef V
-
-#define	V(a,b,c,d) 0x##d##a##b##c
-static uint32 FT1[256] = { FT };
-#undef V
-
-#define	V(a,b,c,d) 0x##c##d##a##b
-static uint32 FT2[256] = { FT };
-#undef V
-
-#define	V(a,b,c,d) 0x##b##c##d##a
-static uint32 FT3[256] = { FT };
-#undef V
-
-#undef FT
-
-/* reverse S-box */
-
-static uint32 RSb[256] =
-{
-	0x52, 0x09,	0x6A, 0xD5,	0x30, 0x36,	0xA5, 0x38,
-	0xBF, 0x40,	0xA3, 0x9E,	0x81, 0xF3,	0xD7, 0xFB,
-	0x7C, 0xE3,	0x39, 0x82,	0x9B, 0x2F,	0xFF, 0x87,
-	0x34, 0x8E,	0x43, 0x44,	0xC4, 0xDE,	0xE9, 0xCB,
-	0x54, 0x7B,	0x94, 0x32,	0xA6, 0xC2,	0x23, 0x3D,
-	0xEE, 0x4C,	0x95, 0x0B,	0x42, 0xFA,	0xC3, 0x4E,
-	0x08, 0x2E,	0xA1, 0x66,	0x28, 0xD9,	0x24, 0xB2,
-	0x76, 0x5B,	0xA2, 0x49,	0x6D, 0x8B,	0xD1, 0x25,
-	0x72, 0xF8,	0xF6, 0x64,	0x86, 0x68,	0x98, 0x16,
-	0xD4, 0xA4,	0x5C, 0xCC,	0x5D, 0x65,	0xB6, 0x92,
-	0x6C, 0x70,	0x48, 0x50,	0xFD, 0xED,	0xB9, 0xDA,
-	0x5E, 0x15,	0x46, 0x57,	0xA7, 0x8D,	0x9D, 0x84,
-	0x90, 0xD8,	0xAB, 0x00,	0x8C, 0xBC,	0xD3, 0x0A,
-	0xF7, 0xE4,	0x58, 0x05,	0xB8, 0xB3,	0x45, 0x06,
-	0xD0, 0x2C,	0x1E, 0x8F,	0xCA, 0x3F,	0x0F, 0x02,
-	0xC1, 0xAF,	0xBD, 0x03,	0x01, 0x13,	0x8A, 0x6B,
-	0x3A, 0x91,	0x11, 0x41,	0x4F, 0x67,	0xDC, 0xEA,
-	0x97, 0xF2,	0xCF, 0xCE,	0xF0, 0xB4,	0xE6, 0x73,
-	0x96, 0xAC,	0x74, 0x22,	0xE7, 0xAD,	0x35, 0x85,
-	0xE2, 0xF9,	0x37, 0xE8,	0x1C, 0x75,	0xDF, 0x6E,
-	0x47, 0xF1,	0x1A, 0x71,	0x1D, 0x29,	0xC5, 0x89,
-	0x6F, 0xB7,	0x62, 0x0E,	0xAA, 0x18,	0xBE, 0x1B,
-	0xFC, 0x56,	0x3E, 0x4B,	0xC6, 0xD2,	0x79, 0x20,
-	0x9A, 0xDB,	0xC0, 0xFE,	0x78, 0xCD,	0x5A, 0xF4,
-	0x1F, 0xDD,	0xA8, 0x33,	0x88, 0x07,	0xC7, 0x31,
-	0xB1, 0x12,	0x10, 0x59,	0x27, 0x80,	0xEC, 0x5F,
-	0x60, 0x51,	0x7F, 0xA9,	0x19, 0xB5,	0x4A, 0x0D,
-	0x2D, 0xE5,	0x7A, 0x9F,	0x93, 0xC9,	0x9C, 0xEF,
-	0xA0, 0xE0,	0x3B, 0x4D,	0xAE, 0x2A,	0xF5, 0xB0,
-	0xC8, 0xEB,	0xBB, 0x3C,	0x83, 0x53,	0x99, 0x61,
-	0x17, 0x2B,	0x04, 0x7E,	0xBA, 0x77,	0xD6, 0x26,
-	0xE1, 0x69,	0x14, 0x63,	0x55, 0x21,	0x0C, 0x7D
-};
-
-/* reverse table */
-
-#define	RT \
-\
-	V(51,F4,A7,50),	V(7E,41,65,53),	V(1A,17,A4,C3),	V(3A,27,5E,96),	\
-	V(3B,AB,6B,CB),	V(1F,9D,45,F1),	V(AC,FA,58,AB),	V(4B,E3,03,93),	\
-	V(20,30,FA,55),	V(AD,76,6D,F6),	V(88,CC,76,91),	V(F5,02,4C,25),	\
-	V(4F,E5,D7,FC),	V(C5,2A,CB,D7),	V(26,35,44,80),	V(B5,62,A3,8F),	\
-	V(DE,B1,5A,49),	V(25,BA,1B,67),	V(45,EA,0E,98),	V(5D,FE,C0,E1),	\
-	V(C3,2F,75,02),	V(81,4C,F0,12),	V(8D,46,97,A3),	V(6B,D3,F9,C6),	\
-	V(03,8F,5F,E7),	V(15,92,9C,95),	V(BF,6D,7A,EB),	V(95,52,59,DA),	\
-	V(D4,BE,83,2D),	V(58,74,21,D3),	V(49,E0,69,29),	V(8E,C9,C8,44),	\
-	V(75,C2,89,6A),	V(F4,8E,79,78),	V(99,58,3E,6B),	V(27,B9,71,DD),	\
-	V(BE,E1,4F,B6),	V(F0,88,AD,17),	V(C9,20,AC,66),	V(7D,CE,3A,B4),	\
-	V(63,DF,4A,18),	V(E5,1A,31,82),	V(97,51,33,60),	V(62,53,7F,45),	\
-	V(B1,64,77,E0),	V(BB,6B,AE,84),	V(FE,81,A0,1C),	V(F9,08,2B,94),	\
-	V(70,48,68,58),	V(8F,45,FD,19),	V(94,DE,6C,87),	V(52,7B,F8,B7),	\
-	V(AB,73,D3,23),	V(72,4B,02,E2),	V(E3,1F,8F,57),	V(66,55,AB,2A),	\
-	V(B2,EB,28,07),	V(2F,B5,C2,03),	V(86,C5,7B,9A),	V(D3,37,08,A5),	\
-	V(30,28,87,F2),	V(23,BF,A5,B2),	V(02,03,6A,BA),	V(ED,16,82,5C),	\
-	V(8A,CF,1C,2B),	V(A7,79,B4,92),	V(F3,07,F2,F0),	V(4E,69,E2,A1),	\
-	V(65,DA,F4,CD),	V(06,05,BE,D5),	V(D1,34,62,1F),	V(C4,A6,FE,8A),	\
-	V(34,2E,53,9D),	V(A2,F3,55,A0),	V(05,8A,E1,32),	V(A4,F6,EB,75),	\
-	V(0B,83,EC,39),	V(40,60,EF,AA),	V(5E,71,9F,06),	V(BD,6E,10,51),	\
-	V(3E,21,8A,F9),	V(96,DD,06,3D),	V(DD,3E,05,AE),	V(4D,E6,BD,46),	\
-	V(91,54,8D,B5),	V(71,C4,5D,05),	V(04,06,D4,6F),	V(60,50,15,FF),	\
-	V(19,98,FB,24),	V(D6,BD,E9,97),	V(89,40,43,CC),	V(67,D9,9E,77),	\
-	V(B0,E8,42,BD),	V(07,89,8B,88),	V(E7,19,5B,38),	V(79,C8,EE,DB),	\
-	V(A1,7C,0A,47),	V(7C,42,0F,E9),	V(F8,84,1E,C9),	V(00,00,00,00),	\
-	V(09,80,86,83),	V(32,2B,ED,48),	V(1E,11,70,AC),	V(6C,5A,72,4E),	\
-	V(FD,0E,FF,FB),	V(0F,85,38,56),	V(3D,AE,D5,1E),	V(36,2D,39,27),	\
-	V(0A,0F,D9,64),	V(68,5C,A6,21),	V(9B,5B,54,D1),	V(24,36,2E,3A),	\
-	V(0C,0A,67,B1),	V(93,57,E7,0F),	V(B4,EE,96,D2),	V(1B,9B,91,9E),	\
-	V(80,C0,C5,4F),	V(61,DC,20,A2),	V(5A,77,4B,69),	V(1C,12,1A,16),	\
-	V(E2,93,BA,0A),	V(C0,A0,2A,E5),	V(3C,22,E0,43),	V(12,1B,17,1D),	\
-	V(0E,09,0D,0B),	V(F2,8B,C7,AD),	V(2D,B6,A8,B9),	V(14,1E,A9,C8),	\
-	V(57,F1,19,85),	V(AF,75,07,4C),	V(EE,99,DD,BB),	V(A3,7F,60,FD),	\
-	V(F7,01,26,9F),	V(5C,72,F5,BC),	V(44,66,3B,C5),	V(5B,FB,7E,34),	\
-	V(8B,43,29,76),	V(CB,23,C6,DC),	V(B6,ED,FC,68),	V(B8,E4,F1,63),	\
-	V(D7,31,DC,CA),	V(42,63,85,10),	V(13,97,22,40),	V(84,C6,11,20),	\
-	V(85,4A,24,7D),	V(D2,BB,3D,F8),	V(AE,F9,32,11),	V(C7,29,A1,6D),	\
-	V(1D,9E,2F,4B),	V(DC,B2,30,F3),	V(0D,86,52,EC),	V(77,C1,E3,D0),	\
-	V(2B,B3,16,6C),	V(A9,70,B9,99),	V(11,94,48,FA),	V(47,E9,64,22),	\
-	V(A8,FC,8C,C4),	V(A0,F0,3F,1A),	V(56,7D,2C,D8),	V(22,33,90,EF),	\
-	V(87,49,4E,C7),	V(D9,38,D1,C1),	V(8C,CA,A2,FE),	V(98,D4,0B,36),	\
-	V(A6,F5,81,CF),	V(A5,7A,DE,28),	V(DA,B7,8E,26),	V(3F,AD,BF,A4),	\
-	V(2C,3A,9D,E4),	V(50,78,92,0D),	V(6A,5F,CC,9B),	V(54,7E,46,62),	\
-	V(F6,8D,13,C2),	V(90,D8,B8,E8),	V(2E,39,F7,5E),	V(82,C3,AF,F5),	\
-	V(9F,5D,80,BE),	V(69,D0,93,7C),	V(6F,D5,2D,A9),	V(CF,25,12,B3),	\
-	V(C8,AC,99,3B),	V(10,18,7D,A7),	V(E8,9C,63,6E),	V(DB,3B,BB,7B),	\
-	V(CD,26,78,09),	V(6E,59,18,F4),	V(EC,9A,B7,01),	V(83,4F,9A,A8),	\
-	V(E6,95,6E,65),	V(AA,FF,E6,7E),	V(21,BC,CF,08),	V(EF,15,E8,E6),	\
-	V(BA,E7,9B,D9),	V(4A,6F,36,CE),	V(EA,9F,09,D4),	V(29,B0,7C,D6),	\
-	V(31,A4,B2,AF),	V(2A,3F,23,31),	V(C6,A5,94,30),	V(35,A2,66,C0),	\
-	V(74,4E,BC,37),	V(FC,82,CA,A6),	V(E0,90,D0,B0),	V(33,A7,D8,15),	\
-	V(F1,04,98,4A),	V(41,EC,DA,F7),	V(7F,CD,50,0E),	V(17,91,F6,2F),	\
-	V(76,4D,D6,8D),	V(43,EF,B0,4D),	V(CC,AA,4D,54),	V(E4,96,04,DF),	\
-	V(9E,D1,B5,E3),	V(4C,6A,88,1B),	V(C1,2C,1F,B8),	V(46,65,51,7F),	\
-	V(9D,5E,EA,04),	V(01,8C,35,5D),	V(FA,87,74,73),	V(FB,0B,41,2E),	\
-	V(B3,67,1D,5A),	V(92,DB,D2,52),	V(E9,10,56,33),	V(6D,D6,47,13),	\
-	V(9A,D7,61,8C),	V(37,A1,0C,7A),	V(59,F8,14,8E),	V(EB,13,3C,89),	\
-	V(CE,A9,27,EE),	V(B7,61,C9,35),	V(E1,1C,E5,ED),	V(7A,47,B1,3C),	\
-	V(9C,D2,DF,59),	V(55,F2,73,3F),	V(18,14,CE,79),	V(73,C7,37,BF),	\
-	V(53,F7,CD,EA),	V(5F,FD,AA,5B),	V(DF,3D,6F,14),	V(78,44,DB,86),	\
-	V(CA,AF,F3,81),	V(B9,68,C4,3E),	V(38,24,34,2C),	V(C2,A3,40,5F),	\
-	V(16,1D,C3,72),	V(BC,E2,25,0C),	V(28,3C,49,8B),	V(FF,0D,95,41),	\
-	V(39,A8,01,71),	V(08,0C,B3,DE),	V(D8,B4,E4,9C),	V(64,56,C1,90),	\
-	V(7B,CB,84,61),	V(D5,32,B6,70),	V(48,6C,5C,74),	V(D0,B8,57,42)
-
-#define	V(a,b,c,d) 0x##a##b##c##d
-static uint32 RT0[256] = { RT };
-#undef V
-
-#define	V(a,b,c,d) 0x##d##a##b##c
-static uint32 RT1[256] = { RT };
-#undef V
-
-#define	V(a,b,c,d) 0x##c##d##a##b
-static uint32 RT2[256] = { RT };
-#undef V
-
-#define	V(a,b,c,d) 0x##b##c##d##a
-static uint32 RT3[256] = { RT };
-#undef V
-
-#undef RT
-
-/* round constants */
-
-static uint32 RCON[10] =
-{
-	0x01000000,	0x02000000,	0x04000000,	0x08000000,
-	0x10000000,	0x20000000,	0x40000000,	0x80000000,
-	0x1B000000,	0x36000000
-};
-
-/* key schedule	tables */
-
-static int KT_init = 1;
-
-static uint32 KT0[256];
-static uint32 KT1[256];
-static uint32 KT2[256];
-static uint32 KT3[256];
-
-/* platform-independant	32-bit integer manipulation	macros */
-
-#define	GET_UINT32(n,b,i)						\
-{												\
-	(n)	= (	(uint32) (b)[(i)	] << 24	)		\
-		| (	(uint32) (b)[(i) + 1] << 16	)		\
-		| (	(uint32) (b)[(i) + 2] <<  8	)		\
-		| (	(uint32) (b)[(i) + 3]		);		\
-}
-
-#define	PUT_UINT32(n,b,i)						\
-{												\
-	(b)[(i)	   ] = (uint8) ( (n) >>	24 );		\
-	(b)[(i)	+ 1] = (uint8) ( (n) >>	16 );		\
-	(b)[(i)	+ 2] = (uint8) ( (n) >>	 8 );		\
-	(b)[(i)	+ 3] = (uint8) ( (n)	   );		\
-}
-
-/* AES key scheduling routine */
-
-int	rtmp_aes_set_key( aes_context *ctx, uint8 *key, int nbits )
-{
-	int	i;
-	uint32 *RK,	*SK;
-
-	switch(	nbits )
-	{
-		case 128: ctx->nr =	10;	break;
-		case 192: ctx->nr =	12;	break;
-		case 256: ctx->nr =	14;	break;
-		default	: return( 1	);
-	}
-
-	RK = ctx->erk;
-
-	for( i = 0;	i <	(nbits >> 5); i++ )
-	{
-		GET_UINT32(	RK[i], key,	i *	4 );
-	}
-
-	/* setup encryption	round keys */
-
-	switch(	nbits )
-	{
-	case 128:
-
-		for( i = 0;	i <	10;	i++, RK	+= 4 )
-		{
-			RK[4]  = RK[0] ^ RCON[i] ^
-						( FSb[ (uint8) ( RK[3] >> 16 ) ] <<	24 ) ^
-						( FSb[ (uint8) ( RK[3] >>  8 ) ] <<	16 ) ^
-						( FSb[ (uint8) ( RK[3]		 ) ] <<	 8 ) ^
-						( FSb[ (uint8) ( RK[3] >> 24 ) ]	   );
-
-			RK[5]  = RK[1] ^ RK[4];
-			RK[6]  = RK[2] ^ RK[5];
-			RK[7]  = RK[3] ^ RK[6];
-		}
-		break;
-
-	case 192:
-
-		for( i = 0;	i <	8; i++,	RK += 6	)
-		{
-			RK[6]  = RK[0] ^ RCON[i] ^
-						( FSb[ (uint8) ( RK[5] >> 16 ) ] <<	24 ) ^
-						( FSb[ (uint8) ( RK[5] >>  8 ) ] <<	16 ) ^
-						( FSb[ (uint8) ( RK[5]		 ) ] <<	 8 ) ^
-						( FSb[ (uint8) ( RK[5] >> 24 ) ]	   );
-
-			RK[7]  = RK[1] ^ RK[6];
-			RK[8]  = RK[2] ^ RK[7];
-			RK[9]  = RK[3] ^ RK[8];
-			RK[10] = RK[4] ^ RK[9];
-			RK[11] = RK[5] ^ RK[10];
-		}
-		break;
-
-	case 256:
-
-		for( i = 0;	i <	7; i++,	RK += 8	)
-		{
-			RK[8]  = RK[0] ^ RCON[i] ^
-						( FSb[ (uint8) ( RK[7] >> 16 ) ] <<	24 ) ^
-						( FSb[ (uint8) ( RK[7] >>  8 ) ] <<	16 ) ^
-						( FSb[ (uint8) ( RK[7]		 ) ] <<	 8 ) ^
-						( FSb[ (uint8) ( RK[7] >> 24 ) ]	   );
-
-			RK[9]  = RK[1] ^ RK[8];
-			RK[10] = RK[2] ^ RK[9];
-			RK[11] = RK[3] ^ RK[10];
-
-			RK[12] = RK[4] ^
-						( FSb[ (uint8) ( RK[11]	>> 24 )	] << 24	) ^
-						( FSb[ (uint8) ( RK[11]	>> 16 )	] << 16	) ^
-						( FSb[ (uint8) ( RK[11]	>>	8 )	] <<  8	) ^
-						( FSb[ (uint8) ( RK[11]		  )	]		);
-
-			RK[13] = RK[5] ^ RK[12];
-			RK[14] = RK[6] ^ RK[13];
-			RK[15] = RK[7] ^ RK[14];
-		}
-		break;
-	}
-
-	/* setup decryption	round keys */
-
-	if(	KT_init	)
-	{
-		for( i = 0;	i <	256; i++ )
-		{
-			KT0[i] = RT0[ FSb[i] ];
-			KT1[i] = RT1[ FSb[i] ];
-			KT2[i] = RT2[ FSb[i] ];
-			KT3[i] = RT3[ FSb[i] ];
-		}
-
-		KT_init	= 0;
-	}
-
-	SK = ctx->drk;
-
-	*SK++ =	*RK++;
-	*SK++ =	*RK++;
-	*SK++ =	*RK++;
-	*SK++ =	*RK++;
-
-	for( i = 1;	i <	ctx->nr; i++ )
-	{
-		RK -= 8;
-
-		*SK++ =	KT0[ (uint8) ( *RK >> 24 ) ] ^
-				KT1[ (uint8) ( *RK >> 16 ) ] ^
-				KT2[ (uint8) ( *RK >>  8 ) ] ^
-				KT3[ (uint8) ( *RK		 ) ]; RK++;
-
-		*SK++ =	KT0[ (uint8) ( *RK >> 24 ) ] ^
-				KT1[ (uint8) ( *RK >> 16 ) ] ^
-				KT2[ (uint8) ( *RK >>  8 ) ] ^
-				KT3[ (uint8) ( *RK		 ) ]; RK++;
-
-		*SK++ =	KT0[ (uint8) ( *RK >> 24 ) ] ^
-				KT1[ (uint8) ( *RK >> 16 ) ] ^
-				KT2[ (uint8) ( *RK >>  8 ) ] ^
-				KT3[ (uint8) ( *RK		 ) ]; RK++;
-
-		*SK++ =	KT0[ (uint8) ( *RK >> 24 ) ] ^
-				KT1[ (uint8) ( *RK >> 16 ) ] ^
-				KT2[ (uint8) ( *RK >>  8 ) ] ^
-				KT3[ (uint8) ( *RK		 ) ]; RK++;
-	}
-
-	RK -= 8;
-
-	*SK++ =	*RK++;
-	*SK++ =	*RK++;
-	*SK++ =	*RK++;
-	*SK++ =	*RK++;
-
-	return(	0 );
-}
-
-/* AES 128-bit block encryption	routine	*/
-
-void rtmp_aes_encrypt(aes_context *ctx, uint8 input[16],	uint8 output[16] )
-{
-	uint32 *RK,	X0,	X1,	X2,	X3,	Y0,	Y1,	Y2,	Y3;
-
-	RK = ctx->erk;
-	GET_UINT32(	X0,	input,	0 ); X0	^= RK[0];
-	GET_UINT32(	X1,	input,	4 ); X1	^= RK[1];
-	GET_UINT32(	X2,	input,	8 ); X2	^= RK[2];
-	GET_UINT32(	X3,	input, 12 ); X3	^= RK[3];
-
-#define	AES_FROUND(X0,X1,X2,X3,Y0,Y1,Y2,Y3)		\
-{												\
-	RK += 4;									\
-												\
-	X0 = RK[0] ^ FT0[ (uint8) (	Y0 >> 24 ) ] ^	\
-				 FT1[ (uint8) (	Y1 >> 16 ) ] ^	\
-				 FT2[ (uint8) (	Y2 >>  8 ) ] ^	\
-				 FT3[ (uint8) (	Y3		 ) ];	\
-												\
-	X1 = RK[1] ^ FT0[ (uint8) (	Y1 >> 24 ) ] ^	\
-				 FT1[ (uint8) (	Y2 >> 16 ) ] ^	\
-				 FT2[ (uint8) (	Y3 >>  8 ) ] ^	\
-				 FT3[ (uint8) (	Y0		 ) ];	\
-												\
-	X2 = RK[2] ^ FT0[ (uint8) (	Y2 >> 24 ) ] ^	\
-				 FT1[ (uint8) (	Y3 >> 16 ) ] ^	\
-				 FT2[ (uint8) (	Y0 >>  8 ) ] ^	\
-				 FT3[ (uint8) (	Y1		 ) ];	\
-												\
-	X3 = RK[3] ^ FT0[ (uint8) (	Y3 >> 24 ) ] ^	\
-				 FT1[ (uint8) (	Y0 >> 16 ) ] ^	\
-				 FT2[ (uint8) (	Y1 >>  8 ) ] ^	\
-				 FT3[ (uint8) (	Y2		 ) ];	\
-}
-
-	AES_FROUND(	Y0,	Y1,	Y2,	Y3,	X0,	X1,	X2,	X3 );		/* round 1 */
-	AES_FROUND(	X0,	X1,	X2,	X3,	Y0,	Y1,	Y2,	Y3 );		/* round 2 */
-	AES_FROUND(	Y0,	Y1,	Y2,	Y3,	X0,	X1,	X2,	X3 );		/* round 3 */
-	AES_FROUND(	X0,	X1,	X2,	X3,	Y0,	Y1,	Y2,	Y3 );		/* round 4 */
-	AES_FROUND(	Y0,	Y1,	Y2,	Y3,	X0,	X1,	X2,	X3 );		/* round 5 */
-	AES_FROUND(	X0,	X1,	X2,	X3,	Y0,	Y1,	Y2,	Y3 );		/* round 6 */
-	AES_FROUND(	Y0,	Y1,	Y2,	Y3,	X0,	X1,	X2,	X3 );		/* round 7 */
-	AES_FROUND(	X0,	X1,	X2,	X3,	Y0,	Y1,	Y2,	Y3 );		/* round 8 */
-	AES_FROUND(	Y0,	Y1,	Y2,	Y3,	X0,	X1,	X2,	X3 );		/* round 9 */
-
-	if(	ctx->nr	> 10 )
-	{
-		AES_FROUND(	X0,	X1,	X2,	X3,	Y0,	Y1,	Y2,	Y3 );	/* round 10	*/
-		AES_FROUND(	Y0,	Y1,	Y2,	Y3,	X0,	X1,	X2,	X3 );	/* round 11	*/
-	}
-
-	if(	ctx->nr	> 12 )
-	{
-		AES_FROUND(	X0,	X1,	X2,	X3,	Y0,	Y1,	Y2,	Y3 );	/* round 12	*/
-		AES_FROUND(	Y0,	Y1,	Y2,	Y3,	X0,	X1,	X2,	X3 );	/* round 13	*/
-	}
-
-	/* last	round */
-
-	RK += 4;
-
-	X0 = RK[0] ^ ( FSb[	(uint8)	( Y0 >>	24 ) ] << 24 ) ^
-				 ( FSb[	(uint8)	( Y1 >>	16 ) ] << 16 ) ^
-				 ( FSb[	(uint8)	( Y2 >>	 8 ) ] <<  8 ) ^
-				 ( FSb[	(uint8)	( Y3	   ) ]		 );
-
-	X1 = RK[1] ^ ( FSb[	(uint8)	( Y1 >>	24 ) ] << 24 ) ^
-				 ( FSb[	(uint8)	( Y2 >>	16 ) ] << 16 ) ^
-				 ( FSb[	(uint8)	( Y3 >>	 8 ) ] <<  8 ) ^
-				 ( FSb[	(uint8)	( Y0	   ) ]		 );
-
-	X2 = RK[2] ^ ( FSb[	(uint8)	( Y2 >>	24 ) ] << 24 ) ^
-				 ( FSb[	(uint8)	( Y3 >>	16 ) ] << 16 ) ^
-				 ( FSb[	(uint8)	( Y0 >>	 8 ) ] <<  8 ) ^
-				 ( FSb[	(uint8)	( Y1	   ) ]		 );
-
-	X3 = RK[3] ^ ( FSb[	(uint8)	( Y3 >>	24 ) ] << 24 ) ^
-				 ( FSb[	(uint8)	( Y0 >>	16 ) ] << 16 ) ^
-				 ( FSb[	(uint8)	( Y1 >>	 8 ) ] <<  8 ) ^
-				 ( FSb[	(uint8)	( Y2	   ) ]		 );
-
-	PUT_UINT32(	X0,	output,	 0 );
-	PUT_UINT32(	X1,	output,	 4 );
-	PUT_UINT32(	X2,	output,	 8 );
-	PUT_UINT32(	X3,	output,	12 );
-}
-
-/* AES 128-bit block decryption	routine	*/
-
-void rtmp_aes_decrypt( aes_context *ctx,	uint8 input[16], uint8 output[16] )
-{
-	uint32 *RK,	X0,	X1,	X2,	X3,	Y0,	Y1,	Y2,	Y3;
-
-	RK = ctx->drk;
-
-	GET_UINT32(	X0,	input,	0 ); X0	^= RK[0];
-	GET_UINT32(	X1,	input,	4 ); X1	^= RK[1];
-	GET_UINT32(	X2,	input,	8 ); X2	^= RK[2];
-	GET_UINT32(	X3,	input, 12 ); X3	^= RK[3];
-
-#define	AES_RROUND(X0,X1,X2,X3,Y0,Y1,Y2,Y3)		\
-{												\
-	RK += 4;									\
-												\
-	X0 = RK[0] ^ RT0[ (uint8) (	Y0 >> 24 ) ] ^	\
-				 RT1[ (uint8) (	Y3 >> 16 ) ] ^	\
-				 RT2[ (uint8) (	Y2 >>  8 ) ] ^	\
-				 RT3[ (uint8) (	Y1		 ) ];	\
-												\
-	X1 = RK[1] ^ RT0[ (uint8) (	Y1 >> 24 ) ] ^	\
-				 RT1[ (uint8) (	Y0 >> 16 ) ] ^	\
-				 RT2[ (uint8) (	Y3 >>  8 ) ] ^	\
-				 RT3[ (uint8) (	Y2		 ) ];	\
-												\
-	X2 = RK[2] ^ RT0[ (uint8) (	Y2 >> 24 ) ] ^	\
-				 RT1[ (uint8) (	Y1 >> 16 ) ] ^	\
-				 RT2[ (uint8) (	Y0 >>  8 ) ] ^	\
-				 RT3[ (uint8) (	Y3		 ) ];	\
-												\
-	X3 = RK[3] ^ RT0[ (uint8) (	Y3 >> 24 ) ] ^	\
-				 RT1[ (uint8) (	Y2 >> 16 ) ] ^	\
-				 RT2[ (uint8) (	Y1 >>  8 ) ] ^	\
-				 RT3[ (uint8) (	Y0		 ) ];	\
-}
-
-	AES_RROUND(	Y0,	Y1,	Y2,	Y3,	X0,	X1,	X2,	X3 );		/* round 1 */
-	AES_RROUND(	X0,	X1,	X2,	X3,	Y0,	Y1,	Y2,	Y3 );		/* round 2 */
-	AES_RROUND(	Y0,	Y1,	Y2,	Y3,	X0,	X1,	X2,	X3 );		/* round 3 */
-	AES_RROUND(	X0,	X1,	X2,	X3,	Y0,	Y1,	Y2,	Y3 );		/* round 4 */
-	AES_RROUND(	Y0,	Y1,	Y2,	Y3,	X0,	X1,	X2,	X3 );		/* round 5 */
-	AES_RROUND(	X0,	X1,	X2,	X3,	Y0,	Y1,	Y2,	Y3 );		/* round 6 */
-	AES_RROUND(	Y0,	Y1,	Y2,	Y3,	X0,	X1,	X2,	X3 );		/* round 7 */
-	AES_RROUND(	X0,	X1,	X2,	X3,	Y0,	Y1,	Y2,	Y3 );		/* round 8 */
-	AES_RROUND(	Y0,	Y1,	Y2,	Y3,	X0,	X1,	X2,	X3 );		/* round 9 */
-
-	if(	ctx->nr	> 10 )
-	{
-		AES_RROUND(	X0,	X1,	X2,	X3,	Y0,	Y1,	Y2,	Y3 );	/* round 10	*/
-		AES_RROUND(	Y0,	Y1,	Y2,	Y3,	X0,	X1,	X2,	X3 );	/* round 11	*/
-	}
-
-	if(	ctx->nr	> 12 )
-	{
-		AES_RROUND(	X0,	X1,	X2,	X3,	Y0,	Y1,	Y2,	Y3 );	/* round 12	*/
-		AES_RROUND(	Y0,	Y1,	Y2,	Y3,	X0,	X1,	X2,	X3 );	/* round 13	*/
-	}
-
-	/* last	round */
-
-	RK += 4;
-
-	X0 = RK[0] ^ ( RSb[	(uint8)	( Y0 >>	24 ) ] << 24 ) ^
-				 ( RSb[	(uint8)	( Y3 >>	16 ) ] << 16 ) ^
-				 ( RSb[	(uint8)	( Y2 >>	 8 ) ] <<  8 ) ^
-				 ( RSb[	(uint8)	( Y1	   ) ]		 );
-
-	X1 = RK[1] ^ ( RSb[	(uint8)	( Y1 >>	24 ) ] << 24 ) ^
-				 ( RSb[	(uint8)	( Y0 >>	16 ) ] << 16 ) ^
-				 ( RSb[	(uint8)	( Y3 >>	 8 ) ] <<  8 ) ^
-				 ( RSb[	(uint8)	( Y2	   ) ]		 );
-
-	X2 = RK[2] ^ ( RSb[	(uint8)	( Y2 >>	24 ) ] << 24 ) ^
-				 ( RSb[	(uint8)	( Y1 >>	16 ) ] << 16 ) ^
-				 ( RSb[	(uint8)	( Y0 >>	 8 ) ] <<  8 ) ^
-				 ( RSb[	(uint8)	( Y3	   ) ]		 );
-
-	X3 = RK[3] ^ ( RSb[	(uint8)	( Y3 >>	24 ) ] << 24 ) ^
-				 ( RSb[	(uint8)	( Y2 >>	16 ) ] << 16 ) ^
-				 ( RSb[	(uint8)	( Y1 >>	 8 ) ] <<  8 ) ^
-				 ( RSb[	(uint8)	( Y0	   ) ]		 );
-
-	PUT_UINT32(	X0,	output,	 0 );
-	PUT_UINT32(	X1,	output,	 4 );
-	PUT_UINT32(	X2,	output,	 8 );
-	PUT_UINT32(	X3,	output,	12 );
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		SHA1 function
-
-	Arguments:
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-VOID	HMAC_SHA1(
-	IN	UCHAR	*text,
-	IN	UINT	text_len,
-	IN	UCHAR	*key,
-	IN	UINT	key_len,
-	IN	UCHAR	*digest)
-{
-	SHA_CTX	context;
-	UCHAR	k_ipad[65]; /* inner padding - key XORd with ipad	*/
-	UCHAR	k_opad[65]; /* outer padding - key XORd with opad	*/
-	INT		i;
-
-	// if key is longer	than 64	bytes reset	it to key=SHA1(key)
-	if (key_len	> 64)
-	{
-		SHA_CTX		 tctx;
-		SHAInit(&tctx);
-		SHAUpdate(&tctx, key, key_len);
-		SHAFinal(&tctx,	key);
-		key_len	= 20;
-	}
-	NdisZeroMemory(k_ipad, sizeof(k_ipad));
-	NdisZeroMemory(k_opad, sizeof(k_opad));
-	NdisMoveMemory(k_ipad, key,	key_len);
-	NdisMoveMemory(k_opad, key,	key_len);
-
-	// XOR key with	ipad and opad values
-	for	(i = 0;	i <	64;	i++)
-	{
-		k_ipad[i] ^= 0x36;
-		k_opad[i] ^= 0x5c;
-	}
-
-	// perform inner SHA1
-	SHAInit(&context); 						/* init context for 1st pass */
-	SHAUpdate(&context,	k_ipad,	64);		/*	start with inner pad */
-	SHAUpdate(&context,	text, text_len);	/*	then text of datagram */
-	SHAFinal(&context, digest);				/* finish up 1st pass */
-
-	//perform outer	SHA1
-	SHAInit(&context);					/* init context for 2nd pass */
-	SHAUpdate(&context,	k_opad,	64);	/*	start with outer pad */
-	SHAUpdate(&context,	digest,	20);	/*	then results of	1st	hash */
-	SHAFinal(&context, digest);			/* finish up 2nd pass */
-
-}
-
-/*
-* F(P, S, c, i) = U1 xor U2 xor ... Uc
-* U1 = PRF(P, S || Int(i))
-* U2 = PRF(P, U1)
-* Uc = PRF(P, Uc-1)
-*/
-
-void F(char *password, unsigned char *ssid, int ssidlength, int iterations, int count, unsigned char *output)
-{
-    unsigned char digest[36], digest1[SHA_DIGEST_LEN];
-    int i, j;
-
-    /* U1 = PRF(P, S || int(i)) */
-    memcpy(digest, ssid, ssidlength);
-    digest[ssidlength] = (unsigned char)((count>>24) & 0xff);
-    digest[ssidlength+1] = (unsigned char)((count>>16) & 0xff);
-    digest[ssidlength+2] = (unsigned char)((count>>8) & 0xff);
-    digest[ssidlength+3] = (unsigned char)(count & 0xff);
-    HMAC_SHA1(digest, ssidlength+4, (unsigned char*) password, (int) strlen(password), digest1); // for WPA update
-
-    /* output = U1 */
-    memcpy(output, digest1, SHA_DIGEST_LEN);
-
-    for (i = 1; i < iterations; i++)
-    {
-        /* Un = PRF(P, Un-1) */
-        HMAC_SHA1(digest1, SHA_DIGEST_LEN, (unsigned char*) password, (int) strlen(password), digest); // for WPA update
-        memcpy(digest1, digest, SHA_DIGEST_LEN);
-
-        /* output = output xor Un */
-        for (j = 0; j < SHA_DIGEST_LEN; j++)
-        {
-            output[j] ^= digest[j];
-        }
-    }
-}
-/*
-* password - ascii string up to 63 characters in length
-* ssid - octet string up to 32 octets
-* ssidlength - length of ssid in octets
-* output must be 40 octets in length and outputs 256 bits of key
-*/
-int PasswordHash(char *password, unsigned char *ssid, int ssidlength, unsigned char *output)
-{
-    if ((strlen(password) > 63) || (ssidlength > 32))
-        return 0;
-
-    F(password, ssid, ssidlength, 4096, 1, output);
-    F(password, ssid, ssidlength, 4096, 2, &output[SHA_DIGEST_LEN]);
-    return 1;
-}
-
-
+#include "../../rt2870/common/md5.c"
diff --git a/drivers/staging/rt3070/common/mlme.c b/drivers/staging/rt3070/common/mlme.c
index 0189bab013c..c2d0d4e10cb 100644
--- a/drivers/staging/rt3070/common/mlme.c
+++ b/drivers/staging/rt3070/common/mlme.c
@@ -1,9136 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	mlme.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	John Chang	2004-08-25		Modify from RT2500 code base
-	John Chang	2004-09-06		modified for RT2600
-*/
-
-#include "../rt_config.h"
-#include <stdarg.h>
-
-UCHAR	CISCO_OUI[] = {0x00, 0x40, 0x96};
-
-UCHAR	WPA_OUI[] = {0x00, 0x50, 0xf2, 0x01};
-UCHAR	RSN_OUI[] = {0x00, 0x0f, 0xac};
-UCHAR	WAPI_OUI[] = {0x00, 0x14, 0x72};
-UCHAR   WME_INFO_ELEM[]  = {0x00, 0x50, 0xf2, 0x02, 0x00, 0x01};
-UCHAR   WME_PARM_ELEM[] = {0x00, 0x50, 0xf2, 0x02, 0x01, 0x01};
-UCHAR	Ccx2QosInfo[] = {0x00, 0x40, 0x96, 0x04};
-UCHAR   RALINK_OUI[]  = {0x00, 0x0c, 0x43};
-UCHAR   BROADCOM_OUI[]  = {0x00, 0x90, 0x4c};
-UCHAR   WPS_OUI[] = {0x00, 0x50, 0xf2, 0x04};
-#ifdef CONFIG_STA_SUPPORT
-#ifdef DOT11_N_SUPPORT
-UCHAR	PRE_N_HT_OUI[]	= {0x00, 0x90, 0x4c};
-#endif // DOT11_N_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
-UCHAR RateSwitchTable[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-    0x11, 0x00,  0,  0,  0,						// Initial used item after association
-    0x00, 0x00,  0, 40, 101,
-    0x01, 0x00,  1, 40, 50,
-    0x02, 0x00,  2, 35, 45,
-    0x03, 0x00,  3, 20, 45,
-    0x04, 0x21,  0, 30, 50,
-    0x05, 0x21,  1, 20, 50,
-    0x06, 0x21,  2, 20, 50,
-    0x07, 0x21,  3, 15, 50,
-    0x08, 0x21,  4, 15, 30,
-    0x09, 0x21,  5, 10, 25,
-    0x0a, 0x21,  6,  8, 25,
-    0x0b, 0x21,  7,  8, 25,
-    0x0c, 0x20, 12,  15, 30,
-    0x0d, 0x20, 13,  8, 20,
-    0x0e, 0x20, 14,  8, 20,
-    0x0f, 0x20, 15,  8, 25,
-    0x10, 0x22, 15,  8, 25,
-    0x11, 0x00,  0,  0,  0,
-    0x12, 0x00,  0,  0,  0,
-    0x13, 0x00,  0,  0,  0,
-    0x14, 0x00,  0,  0,  0,
-    0x15, 0x00,  0,  0,  0,
-    0x16, 0x00,  0,  0,  0,
-    0x17, 0x00,  0,  0,  0,
-    0x18, 0x00,  0,  0,  0,
-    0x19, 0x00,  0,  0,  0,
-    0x1a, 0x00,  0,  0,  0,
-    0x1b, 0x00,  0,  0,  0,
-    0x1c, 0x00,  0,  0,  0,
-    0x1d, 0x00,  0,  0,  0,
-    0x1e, 0x00,  0,  0,  0,
-    0x1f, 0x00,  0,  0,  0,
-};
-
-UCHAR RateSwitchTable11B[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-    0x04, 0x03,  0,  0,  0,						// Initial used item after association
-    0x00, 0x00,  0, 40, 101,
-    0x01, 0x00,  1, 40, 50,
-    0x02, 0x00,  2, 35, 45,
-    0x03, 0x00,  3, 20, 45,
-};
-
-UCHAR RateSwitchTable11BG[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-    0x0a, 0x00,  0,  0,  0,						// Initial used item after association
-    0x00, 0x00,  0, 40, 101,
-    0x01, 0x00,  1, 40, 50,
-    0x02, 0x00,  2, 35, 45,
-    0x03, 0x00,  3, 20, 45,
-    0x04, 0x10,  2, 20, 35,
-    0x05, 0x10,  3, 16, 35,
-    0x06, 0x10,  4, 10, 25,
-    0x07, 0x10,  5, 16, 25,
-    0x08, 0x10,  6, 10, 25,
-    0x09, 0x10,  7, 10, 13,
-};
-
-UCHAR RateSwitchTable11G[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-    0x08, 0x00,  0,  0,  0,						// Initial used item after association
-    0x00, 0x10,  0, 20, 101,
-    0x01, 0x10,  1, 20, 35,
-    0x02, 0x10,  2, 20, 35,
-    0x03, 0x10,  3, 16, 35,
-    0x04, 0x10,  4, 10, 25,
-    0x05, 0x10,  5, 16, 25,
-    0x06, 0x10,  6, 10, 25,
-    0x07, 0x10,  7, 10, 13,
-};
-
-#ifdef DOT11_N_SUPPORT
-UCHAR RateSwitchTable11N1S[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-    0x09, 0x00,  0,  0,  0,						// Initial used item after association
-    0x00, 0x21,  0, 30, 101,
-    0x01, 0x21,  1, 20, 50,
-    0x02, 0x21,  2, 20, 50,
-    0x03, 0x21,  3, 15, 50,
-    0x04, 0x21,  4, 15, 30,
-    0x05, 0x21,  5, 10, 25,
-    0x06, 0x21,  6,  8, 14,
-    0x07, 0x21,  7,  8, 14,
-    0x08, 0x23,  7,  8, 14,
-};
-
-UCHAR RateSwitchTable11N2S[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-    0x0a, 0x00,  0,  0,  0,      // Initial used item after association
-    0x00, 0x21,  0, 30, 101,
-    0x01, 0x21,  1, 20, 50,
-    0x02, 0x21,  2, 20, 50,
-    0x03, 0x21,  3, 15, 50,
-    0x04, 0x21,  4, 15, 30,
-    0x05, 0x20, 12,  15, 30,
-    0x06, 0x20, 13,  8, 20,
-    0x07, 0x20, 14,  8, 20,
-    0x08, 0x20, 15,  8, 25,
-    0x09, 0x22, 15,  8, 25,
-};
-
-UCHAR RateSwitchTable11N3S[] = {
-// Item No.	Mode	Curr-MCS	TrainUp	TrainDown	// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-    0x0a, 0x00,  0,  0,  0,      // Initial used item after association
-    0x00, 0x21,  0, 30, 101,
-    0x01, 0x21,  1, 20, 50,
-    0x02, 0x21,  2, 20, 50,
-    0x03, 0x21,  3, 15, 50,
-    0x04, 0x21,  4, 15, 30,
-    0x05, 0x20, 12,  15, 30,
-    0x06, 0x20, 13,  8, 20,
-    0x07, 0x20, 14,  8, 20,
-    0x08, 0x20, 15,  8, 25,
-    0x09, 0x22, 15,  8, 25,
-};
-
-UCHAR RateSwitchTable11N2SForABand[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-    0x0b, 0x09,  0,  0,  0,						// Initial used item after association
-    0x00, 0x21,  0, 30, 101,
-    0x01, 0x21,  1, 20, 50,
-    0x02, 0x21,  2, 20, 50,
-    0x03, 0x21,  3, 15, 50,
-    0x04, 0x21,  4, 15, 30,
-    0x05, 0x21,  5, 15, 30,
-    0x06, 0x20, 12,  15, 30,
-    0x07, 0x20, 13,  8, 20,
-    0x08, 0x20, 14,  8, 20,
-    0x09, 0x20, 15,  8, 25,
-    0x0a, 0x22, 15,  8, 25,
-};
-
-UCHAR RateSwitchTable11N3SForABand[] = { // 3*3
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-    0x0b, 0x09,  0,  0,  0,						// Initial used item after association
-    0x00, 0x21,  0, 30, 101,
-    0x01, 0x21,  1, 20, 50,
-    0x02, 0x21,  2, 20, 50,
-    0x03, 0x21,  3, 15, 50,
-    0x04, 0x21,  4, 15, 30,
-    0x05, 0x21,  5, 15, 30,
-    0x06, 0x20, 12,  15, 30,
-    0x07, 0x20, 13,  8, 20,
-    0x08, 0x20, 14,  8, 20,
-    0x09, 0x20, 15,  8, 25,
-    0x0a, 0x22, 15,  8, 25,
-};
-
-UCHAR RateSwitchTable11BGN1S[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-    0x0d, 0x00,  0,  0,  0,						// Initial used item after association
-    0x00, 0x00,  0, 40, 101,
-    0x01, 0x00,  1, 40, 50,
-    0x02, 0x00,  2, 35, 45,
-    0x03, 0x00,  3, 20, 45,
-    0x04, 0x21,  0, 30,101,	//50
-    0x05, 0x21,  1, 20, 50,
-    0x06, 0x21,  2, 20, 50,
-    0x07, 0x21,  3, 15, 50,
-    0x08, 0x21,  4, 15, 30,
-    0x09, 0x21,  5, 10, 25,
-    0x0a, 0x21,  6,  8, 14,
-    0x0b, 0x21,  7,  8, 14,
-	0x0c, 0x23,  7,  8, 14,
-};
-
-UCHAR RateSwitchTable11BGN2S[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-    0x0a, 0x00,  0,  0,  0,						// Initial used item after association
-    0x00, 0x21,  0, 30,101,	//50
-    0x01, 0x21,  1, 20, 50,
-    0x02, 0x21,  2, 20, 50,
-    0x03, 0x21,  3, 15, 50,
-    0x04, 0x21,  4, 15, 30,
-    0x05, 0x20, 12, 15, 30,
-    0x06, 0x20, 13,  8, 20,
-    0x07, 0x20, 14,  8, 20,
-    0x08, 0x20, 15,  8, 25,
-    0x09, 0x22, 15,  8, 25,
-};
-
-UCHAR RateSwitchTable11BGN3S[] = { // 3*3
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-    0x0a, 0x00,  0,  0,  0,						// Initial used item after association
-    0x00, 0x21,  0, 30,101,	//50
-    0x01, 0x21,  1, 20, 50,
-    0x02, 0x21,  2, 20, 50,
-    0x03, 0x21,  3, 20, 50,
-    0x04, 0x21,  4, 15, 50,
-#if 1
-    0x05, 0x20, 20, 15, 30,
-    0x06, 0x20, 21,  8, 20,
-    0x07, 0x20, 22,  8, 20,
-    0x08, 0x20, 23,  8, 25,
-    0x09, 0x22, 23,  8, 25,
-#else // for RT2860 2*3 test
-    0x05, 0x20, 12, 15, 30,
-    0x06, 0x20, 13,  8, 20,
-    0x07, 0x20, 14,  8, 20,
-    0x08, 0x20, 15,  8, 25,
-    0x09, 0x22, 15,  8, 25,
-#endif
-};
-
-UCHAR RateSwitchTable11BGN2SForABand[] = {
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-    0x0b, 0x09,  0,  0,  0,						// Initial used item after association
-    0x00, 0x21,  0, 30,101,	//50
-    0x01, 0x21,  1, 20, 50,
-    0x02, 0x21,  2, 20, 50,
-    0x03, 0x21,  3, 15, 50,
-    0x04, 0x21,  4, 15, 30,
-    0x05, 0x21,  5, 15, 30,
-    0x06, 0x20, 12, 15, 30,
-    0x07, 0x20, 13,  8, 20,
-    0x08, 0x20, 14,  8, 20,
-    0x09, 0x20, 15,  8, 25,
-    0x0a, 0x22, 15,  8, 25,
-};
-
-UCHAR RateSwitchTable11BGN3SForABand[] = { // 3*3
-// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
-    0x0c, 0x09,  0,  0,  0,						// Initial used item after association
-    0x00, 0x21,  0, 30,101,	//50
-    0x01, 0x21,  1, 20, 50,
-    0x02, 0x21,  2, 20, 50,
-    0x03, 0x21,  3, 15, 50,
-    0x04, 0x21,  4, 15, 30,
-    0x05, 0x21,  5, 15, 30,
-    0x06, 0x21, 12, 15, 30,
-    0x07, 0x20, 20, 15, 30,
-    0x08, 0x20, 21,  8, 20,
-    0x09, 0x20, 22,  8, 20,
-    0x0a, 0x20, 23,  8, 25,
-    0x0b, 0x22, 23,  8, 25,
-};
-#endif // DOT11_N_SUPPORT //
-
-PUCHAR ReasonString[] = {
-	/* 0  */	 "Reserved",
-	/* 1  */	 "Unspecified Reason",
-	/* 2  */	 "Previous Auth no longer valid",
-	/* 3  */	 "STA is leaving / has left",
-	/* 4  */	 "DIS-ASSOC due to inactivity",
-	/* 5  */	 "AP unable to hanle all associations",
-	/* 6  */	 "class 2 error",
-	/* 7  */	 "class 3 error",
-	/* 8  */	 "STA is leaving / has left",
-	/* 9  */	 "require auth before assoc/re-assoc",
-	/* 10 */	 "Reserved",
-	/* 11 */	 "Reserved",
-	/* 12 */	 "Reserved",
-	/* 13 */	 "invalid IE",
-	/* 14 */	 "MIC error",
-	/* 15 */	 "4-way handshake timeout",
-	/* 16 */	 "2-way (group key) handshake timeout",
-	/* 17 */	 "4-way handshake IE diff among AssosReq/Rsp/Beacon",
-	/* 18 */
-};
-
-extern UCHAR	 OfdmRateToRxwiMCS[];
-// since RT61 has better RX sensibility, we have to limit TX ACK rate not to exceed our normal data TX rate.
-// otherwise the WLAN peer may not be able to receive the ACK thus downgrade its data TX rate
-ULONG BasicRateMask[12]				= {0xfffff001 /* 1-Mbps */, 0xfffff003 /* 2 Mbps */, 0xfffff007 /* 5.5 */, 0xfffff00f /* 11 */,
-									  0xfffff01f /* 6 */	 , 0xfffff03f /* 9 */	  , 0xfffff07f /* 12 */ , 0xfffff0ff /* 18 */,
-									  0xfffff1ff /* 24 */	 , 0xfffff3ff /* 36 */	  , 0xfffff7ff /* 48 */ , 0xffffffff /* 54 */};
-
-UCHAR MULTICAST_ADDR[MAC_ADDR_LEN] = {0x1,  0x00, 0x00, 0x00, 0x00, 0x00};
-UCHAR BROADCAST_ADDR[MAC_ADDR_LEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
-UCHAR ZERO_MAC_ADDR[MAC_ADDR_LEN]  = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
-
-// e.g. RssiSafeLevelForTxRate[RATE_36]" means if the current RSSI is greater than
-//		this value, then it's quaranteed capable of operating in 36 mbps TX rate in
-//		clean environment.
-//								  TxRate: 1   2   5.5	11	 6	  9    12	18	 24   36   48	54	 72  100
-CHAR RssiSafeLevelForTxRate[] ={  -92, -91, -90, -87, -88, -86, -85, -83, -81, -78, -72, -71, -40, -40 };
-
-UCHAR  RateIdToMbps[]	 = { 1, 2, 5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 72, 100};
-USHORT RateIdTo500Kbps[] = { 2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108, 144, 200};
-
-UCHAR  SsidIe	 = IE_SSID;
-UCHAR  SupRateIe = IE_SUPP_RATES;
-UCHAR  ExtRateIe = IE_EXT_SUPP_RATES;
-#ifdef DOT11_N_SUPPORT
-UCHAR  HtCapIe = IE_HT_CAP;
-UCHAR  AddHtInfoIe = IE_ADD_HT;
-UCHAR  NewExtChanIe = IE_SECONDARY_CH_OFFSET;
-#ifdef DOT11N_DRAFT3
-UCHAR  ExtHtCapIe = IE_EXT_CAPABILITY;
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
-UCHAR  ErpIe	 = IE_ERP;
-UCHAR  DsIe 	 = IE_DS_PARM;
-UCHAR  TimIe	 = IE_TIM;
-UCHAR  WpaIe	 = IE_WPA;
-UCHAR  Wpa2Ie	 = IE_WPA2;
-UCHAR  IbssIe	 = IE_IBSS_PARM;
-UCHAR  Ccx2Ie	 = IE_CCX_V2;
-UCHAR  WapiIe	 = IE_WAPI;
-
-extern UCHAR	WPA_OUI[];
-
-UCHAR	SES_OUI[] = {0x00, 0x90, 0x4c};
-
-UCHAR	ZeroSsid[32] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
-
-// Reset the RFIC setting to new series
-RTMP_RF_REGS RF2850RegTable[] = {
-//		ch	 R1 		 R2 		 R3(TX0~4=0) R4
-		{1,  0x98402ecc, 0x984c0786, 0x9816b455, 0x9800510b},
-		{2,  0x98402ecc, 0x984c0786, 0x98168a55, 0x9800519f},
-		{3,  0x98402ecc, 0x984c078a, 0x98168a55, 0x9800518b},
-		{4,  0x98402ecc, 0x984c078a, 0x98168a55, 0x9800519f},
-		{5,  0x98402ecc, 0x984c078e, 0x98168a55, 0x9800518b},
-		{6,  0x98402ecc, 0x984c078e, 0x98168a55, 0x9800519f},
-		{7,  0x98402ecc, 0x984c0792, 0x98168a55, 0x9800518b},
-		{8,  0x98402ecc, 0x984c0792, 0x98168a55, 0x9800519f},
-		{9,  0x98402ecc, 0x984c0796, 0x98168a55, 0x9800518b},
-		{10, 0x98402ecc, 0x984c0796, 0x98168a55, 0x9800519f},
-		{11, 0x98402ecc, 0x984c079a, 0x98168a55, 0x9800518b},
-		{12, 0x98402ecc, 0x984c079a, 0x98168a55, 0x9800519f},
-		{13, 0x98402ecc, 0x984c079e, 0x98168a55, 0x9800518b},
-		{14, 0x98402ecc, 0x984c07a2, 0x98168a55, 0x98005193},
-
-		// 802.11 UNI / HyperLan 2
-		{36, 0x98402ecc, 0x984c099a, 0x98158a55, 0x980ed1a3},
-		{38, 0x98402ecc, 0x984c099e, 0x98158a55, 0x980ed193},
-		{40, 0x98402ec8, 0x984c0682, 0x98158a55, 0x980ed183},
-		{44, 0x98402ec8, 0x984c0682, 0x98158a55, 0x980ed1a3},
-		{46, 0x98402ec8, 0x984c0686, 0x98158a55, 0x980ed18b},
-		{48, 0x98402ec8, 0x984c0686, 0x98158a55, 0x980ed19b},
-		{52, 0x98402ec8, 0x984c068a, 0x98158a55, 0x980ed193},
-		{54, 0x98402ec8, 0x984c068a, 0x98158a55, 0x980ed1a3},
-		{56, 0x98402ec8, 0x984c068e, 0x98158a55, 0x980ed18b},
-		{60, 0x98402ec8, 0x984c0692, 0x98158a55, 0x980ed183},
-		{62, 0x98402ec8, 0x984c0692, 0x98158a55, 0x980ed193},
-		{64, 0x98402ec8, 0x984c0692, 0x98158a55, 0x980ed1a3}, // Plugfest#4, Day4, change RFR3 left4th 9->5.
-
-		// 802.11 HyperLan 2
-		{100, 0x98402ec8, 0x984c06b2, 0x98178a55, 0x980ed783},
-
-		// 2008.04.30 modified
-		// The system team has AN to improve the EVM value
-		// for channel 102 to 108 for the RT2850/RT2750 dual band solution.
-		{102, 0x98402ec8, 0x985c06b2, 0x98578a55, 0x980ed793},
-		{104, 0x98402ec8, 0x985c06b2, 0x98578a55, 0x980ed1a3},
-		{108, 0x98402ecc, 0x985c0a32, 0x98578a55, 0x980ed193},
-
-		{110, 0x98402ecc, 0x984c0a36, 0x98178a55, 0x980ed183},
-		{112, 0x98402ecc, 0x984c0a36, 0x98178a55, 0x980ed19b},
-		{116, 0x98402ecc, 0x984c0a3a, 0x98178a55, 0x980ed1a3},
-		{118, 0x98402ecc, 0x984c0a3e, 0x98178a55, 0x980ed193},
-		{120, 0x98402ec4, 0x984c0382, 0x98178a55, 0x980ed183},
-		{124, 0x98402ec4, 0x984c0382, 0x98178a55, 0x980ed193},
-		{126, 0x98402ec4, 0x984c0382, 0x98178a55, 0x980ed15b}, // 0x980ed1bb->0x980ed15b required by Rory 20070927
-		{128, 0x98402ec4, 0x984c0382, 0x98178a55, 0x980ed1a3},
-		{132, 0x98402ec4, 0x984c0386, 0x98178a55, 0x980ed18b},
-		{134, 0x98402ec4, 0x984c0386, 0x98178a55, 0x980ed193},
-		{136, 0x98402ec4, 0x984c0386, 0x98178a55, 0x980ed19b},
-		{140, 0x98402ec4, 0x984c038a, 0x98178a55, 0x980ed183},
-
-		// 802.11 UNII
-		{149, 0x98402ec4, 0x984c038a, 0x98178a55, 0x980ed1a7},
-		{151, 0x98402ec4, 0x984c038e, 0x98178a55, 0x980ed187},
-		{153, 0x98402ec4, 0x984c038e, 0x98178a55, 0x980ed18f},
-		{157, 0x98402ec4, 0x984c038e, 0x98178a55, 0x980ed19f},
-		{159, 0x98402ec4, 0x984c038e, 0x98178a55, 0x980ed1a7},
-		{161, 0x98402ec4, 0x984c0392, 0x98178a55, 0x980ed187},
-		{165, 0x98402ec4, 0x984c0392, 0x98178a55, 0x980ed197},
-
-		// Japan
-		{184, 0x95002ccc, 0x9500491e, 0x9509be55, 0x950c0a0b},
-		{188, 0x95002ccc, 0x95004922, 0x9509be55, 0x950c0a13},
-		{192, 0x95002ccc, 0x95004926, 0x9509be55, 0x950c0a1b},
-		{196, 0x95002ccc, 0x9500492a, 0x9509be55, 0x950c0a23},
-		{208, 0x95002ccc, 0x9500493a, 0x9509be55, 0x950c0a13},
-		{212, 0x95002ccc, 0x9500493e, 0x9509be55, 0x950c0a1b},
-		{216, 0x95002ccc, 0x95004982, 0x9509be55, 0x950c0a23},
-
-		// still lack of MMAC(Japan) ch 34,38,42,46
-};
-UCHAR	NUM_OF_2850_CHNL = (sizeof(RF2850RegTable) / sizeof(RTMP_RF_REGS));
-
-FREQUENCY_ITEM FreqItems3020[] =
-{
-	/**************************************************/
-	// ISM : 2.4 to 2.483 GHz                         //
-	/**************************************************/
-	// 11g
-	/**************************************************/
-	//-CH---N-------R---K-----------
-	{1,    241,  2,  2},
-	{2,    241,	 2,  7},
-	{3,    242,	 2,  2},
-	{4,    242,	 2,  7},
-	{5,    243,	 2,  2},
-	{6,    243,	 2,  7},
-	{7,    244,	 2,  2},
-	{8,    244,	 2,  7},
-	{9,    245,	 2,  2},
-	{10,   245,	 2,  7},
-	{11,   246,	 2,  2},
-	{12,   246,	 2,  7},
-	{13,   247,	 2,  2},
-	{14,   248,	 2,  4},
-};
-//2008/07/10:KH Modified to share this variable
-UCHAR	NUM_OF_3020_CHNL=(sizeof(FreqItems3020) / sizeof(FREQUENCY_ITEM));
-
-/*
-	==========================================================================
-	Description:
-		initialize the MLME task and its data structure (queue, spinlock,
-		timer, state machines).
-
-	IRQL = PASSIVE_LEVEL
-
-	Return:
-		always return NDIS_STATUS_SUCCESS
-
-	==========================================================================
-*/
-NDIS_STATUS MlmeInit(
-	IN PRTMP_ADAPTER pAd)
-{
-	NDIS_STATUS Status = NDIS_STATUS_SUCCESS;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("--> MLME Initialize\n"));
-
-	do
-	{
-		Status = MlmeQueueInit(&pAd->Mlme.Queue);
-		if(Status != NDIS_STATUS_SUCCESS)
-			break;
-
-		pAd->Mlme.bRunning = FALSE;
-		NdisAllocateSpinLock(&pAd->Mlme.TaskLock);
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			BssTableInit(&pAd->ScanTab);
-
-			// init STA state machines
-			AssocStateMachineInit(pAd, &pAd->Mlme.AssocMachine, pAd->Mlme.AssocFunc);
-			AuthStateMachineInit(pAd, &pAd->Mlme.AuthMachine, pAd->Mlme.AuthFunc);
-			AuthRspStateMachineInit(pAd, &pAd->Mlme.AuthRspMachine, pAd->Mlme.AuthRspFunc);
-			SyncStateMachineInit(pAd, &pAd->Mlme.SyncMachine, pAd->Mlme.SyncFunc);
-			WpaPskStateMachineInit(pAd, &pAd->Mlme.WpaPskMachine, pAd->Mlme.WpaPskFunc);
-			AironetStateMachineInit(pAd, &pAd->Mlme.AironetMachine, pAd->Mlme.AironetFunc);
-
-#ifdef QOS_DLS_SUPPORT
-			DlsStateMachineInit(pAd, &pAd->Mlme.DlsMachine, pAd->Mlme.DlsFunc);
-#endif // QOS_DLS_SUPPORT //
-
-
-			// Since we are using switch/case to implement it, the init is different from the above
-			// state machine init
-			MlmeCntlInit(pAd, &pAd->Mlme.CntlMachine, NULL);
-		}
-#endif // CONFIG_STA_SUPPORT //
-
-
-
-		ActionStateMachineInit(pAd, &pAd->Mlme.ActMachine, pAd->Mlme.ActFunc);
-
-		// Init mlme periodic timer
-		RTMPInitTimer(pAd, &pAd->Mlme.PeriodicTimer, GET_TIMER_FUNCTION(MlmePeriodicExec), pAd, TRUE);
-
-		// Set mlme periodic timer
-		RTMPSetTimer(&pAd->Mlme.PeriodicTimer, MLME_TASK_EXEC_INTV);
-
-		// software-based RX Antenna diversity
-		RTMPInitTimer(pAd, &pAd->Mlme.RxAntEvalTimer, GET_TIMER_FUNCTION(AsicRxAntEvalTimeout), pAd, FALSE);
-
-
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-
-	} while (FALSE);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<-- MLME Initialize\n"));
-
-	return Status;
-}
-
-/*
-	==========================================================================
-	Description:
-		main loop of the MLME
-	Pre:
-		Mlme has to be initialized, and there are something inside the queue
-	Note:
-		This function is invoked from MPSetInformation and MPReceive;
-		This task guarantee only one MlmeHandler will run.
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID MlmeHandler(
-	IN PRTMP_ADAPTER pAd)
-{
-	MLME_QUEUE_ELEM 	   *Elem = NULL;
-
-	// Only accept MLME and Frame from peer side, no other (control/data) frame should
-	// get into this state machine
-
-	NdisAcquireSpinLock(&pAd->Mlme.TaskLock);
-	if(pAd->Mlme.bRunning)
-	{
-		NdisReleaseSpinLock(&pAd->Mlme.TaskLock);
-		return;
-	}
-	else
-	{
-		pAd->Mlme.bRunning = TRUE;
-	}
-	NdisReleaseSpinLock(&pAd->Mlme.TaskLock);
-
-	while (!MlmeQueueEmpty(&pAd->Mlme.Queue))
-	{
-		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_MLME_RESET_IN_PROGRESS) ||
-			RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS) ||
-			RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("Device Halted or Removed or MlmeRest, exit MlmeHandler! (queue num = %ld)\n", pAd->Mlme.Queue.Num));
-			break;
-		}
-
-#ifdef RALINK_ATE
-		if(ATE_ON(pAd))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now in MlmeHandler\n"));
-			break;
-		}
-#endif // RALINK_ATE //
-
-		//From message type, determine which state machine I should drive
-		if (MlmeDequeue(&pAd->Mlme.Queue, &Elem))
-		{
-#ifdef RT2870
-			if (Elem->MsgType == MT2_RESET_CONF)
-			{
-				DBGPRINT_RAW(RT_DEBUG_TRACE, ("!!! reset MLME state machine !!!\n"));
-				MlmeRestartStateMachine(pAd);
-				Elem->Occupied = FALSE;
-				Elem->MsgLen = 0;
-				continue;
-			}
-#endif // RT2870 //
-
-			// if dequeue success
-			switch (Elem->Machine)
-			{
-				// STA state machines
-#ifdef	CONFIG_STA_SUPPORT
-				case ASSOC_STATE_MACHINE:
-					StateMachinePerformAction(pAd, &pAd->Mlme.AssocMachine, Elem);
-					break;
-				case AUTH_STATE_MACHINE:
-					StateMachinePerformAction(pAd, &pAd->Mlme.AuthMachine, Elem);
-					break;
-				case AUTH_RSP_STATE_MACHINE:
-					StateMachinePerformAction(pAd, &pAd->Mlme.AuthRspMachine, Elem);
-					break;
-				case SYNC_STATE_MACHINE:
-					StateMachinePerformAction(pAd, &pAd->Mlme.SyncMachine, Elem);
-					break;
-				case MLME_CNTL_STATE_MACHINE:
-					MlmeCntlMachinePerformAction(pAd, &pAd->Mlme.CntlMachine, Elem);
-					break;
-				case WPA_PSK_STATE_MACHINE:
-					StateMachinePerformAction(pAd, &pAd->Mlme.WpaPskMachine, Elem);
-					break;
-#ifdef LEAP_SUPPORT
-				case LEAP_STATE_MACHINE:
-					LeapMachinePerformAction(pAd, &pAd->Mlme.LeapMachine, Elem);
-					break;
-#endif
-				case AIRONET_STATE_MACHINE:
-					StateMachinePerformAction(pAd, &pAd->Mlme.AironetMachine, Elem);
-					break;
-
-#ifdef QOS_DLS_SUPPORT
-				case DLS_STATE_MACHINE:
-					StateMachinePerformAction(pAd, &pAd->Mlme.DlsMachine, Elem);
-					break;
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
-				case ACTION_STATE_MACHINE:
-					StateMachinePerformAction(pAd, &pAd->Mlme.ActMachine, Elem);
-					break;
-
-
-
-
-				default:
-					DBGPRINT(RT_DEBUG_TRACE, ("ERROR: Illegal machine %ld in MlmeHandler()\n", Elem->Machine));
-					break;
-			} // end of switch
-
-			// free MLME element
-			Elem->Occupied = FALSE;
-			Elem->MsgLen = 0;
-
-		}
-		else {
-			DBGPRINT_ERR(("MlmeHandler: MlmeQueue empty\n"));
-		}
-	}
-
-	NdisAcquireSpinLock(&pAd->Mlme.TaskLock);
-	pAd->Mlme.bRunning = FALSE;
-	NdisReleaseSpinLock(&pAd->Mlme.TaskLock);
-}
-
-/*
-	==========================================================================
-	Description:
-		Destructor of MLME (Destroy queue, state machine, spin lock and timer)
-	Parameters:
-		Adapter - NIC Adapter pointer
-	Post:
-		The MLME task will no longer work properly
-
-	IRQL = PASSIVE_LEVEL
-
-	==========================================================================
- */
-VOID MlmeHalt(
-	IN PRTMP_ADAPTER pAd)
-{
-	BOOLEAN		Cancelled;
-#ifdef RT3070
-	UINT32		TxPinCfg = 0x00050F0F;
-#endif // RT3070 //
-
-	DBGPRINT(RT_DEBUG_TRACE, ("==> MlmeHalt\n"));
-
-	if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
-	{
-		// disable BEACON generation and other BEACON related hardware timers
-		AsicDisableSync(pAd);
-	}
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-#ifdef QOS_DLS_SUPPORT
-		UCHAR		i;
-#endif // QOS_DLS_SUPPORT //
-		// Cancel pending timers
-		RTMPCancelTimer(&pAd->MlmeAux.AssocTimer,		&Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.ReassocTimer,		&Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.DisassocTimer,	&Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.AuthTimer,		&Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer,		&Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.ScanTimer,		&Cancelled);
-
-#ifdef QOS_DLS_SUPPORT
-		for (i=0; i<MAX_NUM_OF_DLS_ENTRY; i++)
-		{
-			RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &Cancelled);
-		}
-#endif // QOS_DLS_SUPPORT //
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	RTMPCancelTimer(&pAd->Mlme.PeriodicTimer,		&Cancelled);
-	RTMPCancelTimer(&pAd->Mlme.RxAntEvalTimer,		&Cancelled);
-
-
-
-	if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
-	{
-		// Set LED
-		RTMPSetLED(pAd, LED_HALT);
-        RTMPSetSignalLED(pAd, -100);	// Force signal strength Led to be turned off, firmware is not done it.
-#ifdef RT2870
-        {
-            LED_CFG_STRUC LedCfg;
-            RTMP_IO_READ32(pAd, LED_CFG, &LedCfg.word);
-            LedCfg.field.LedPolar = 0;
-            LedCfg.field.RLedMode = 0;
-            LedCfg.field.GLedMode = 0;
-            LedCfg.field.YLedMode = 0;
-            RTMP_IO_WRITE32(pAd, LED_CFG, LedCfg.word);
-        }
-#endif // RT2870 //
-#ifdef RT3070
-		//
-		// Turn off LNA_PE
-		//
-		if (IS_RT3070(pAd) || IS_RT3071(pAd))
-		{
-			TxPinCfg &= 0xFFFFF0F0;
-			RTUSBWriteMACRegister(pAd, TX_PIN_CFG, TxPinCfg);
-		}
-#endif // RT3070 //
-	}
-
-	RTMPusecDelay(5000);    //  5 msec to gurantee Ant Diversity timer canceled
-
-	MlmeQueueDestroy(&pAd->Mlme.Queue);
-	NdisFreeSpinLock(&pAd->Mlme.TaskLock);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<== MlmeHalt\n"));
-}
-
-VOID MlmeResetRalinkCounters(
-	IN  PRTMP_ADAPTER   pAd)
-{
-	pAd->RalinkCounters.LastOneSecRxOkDataCnt = pAd->RalinkCounters.OneSecRxOkDataCnt;
-	// clear all OneSecxxx counters.
-	pAd->RalinkCounters.OneSecBeaconSentCnt = 0;
-	pAd->RalinkCounters.OneSecFalseCCACnt = 0;
-	pAd->RalinkCounters.OneSecRxFcsErrCnt = 0;
-	pAd->RalinkCounters.OneSecRxOkCnt = 0;
-	pAd->RalinkCounters.OneSecTxFailCount = 0;
-	pAd->RalinkCounters.OneSecTxNoRetryOkCount = 0;
-	pAd->RalinkCounters.OneSecTxRetryOkCount = 0;
-	pAd->RalinkCounters.OneSecRxOkDataCnt = 0;
-
-	// TODO: for debug only. to be removed
-	pAd->RalinkCounters.OneSecOsTxCount[QID_AC_BE] = 0;
-	pAd->RalinkCounters.OneSecOsTxCount[QID_AC_BK] = 0;
-	pAd->RalinkCounters.OneSecOsTxCount[QID_AC_VI] = 0;
-	pAd->RalinkCounters.OneSecOsTxCount[QID_AC_VO] = 0;
-	pAd->RalinkCounters.OneSecDmaDoneCount[QID_AC_BE] = 0;
-	pAd->RalinkCounters.OneSecDmaDoneCount[QID_AC_BK] = 0;
-	pAd->RalinkCounters.OneSecDmaDoneCount[QID_AC_VI] = 0;
-	pAd->RalinkCounters.OneSecDmaDoneCount[QID_AC_VO] = 0;
-	pAd->RalinkCounters.OneSecTxDoneCount = 0;
-	pAd->RalinkCounters.OneSecRxCount = 0;
-	pAd->RalinkCounters.OneSecTxAggregationCount = 0;
-	pAd->RalinkCounters.OneSecRxAggregationCount = 0;
-
-	return;
-}
-
-unsigned long rx_AMSDU;
-unsigned long rx_Total;
-
-/*
-	==========================================================================
-	Description:
-		This routine is executed periodically to -
-		1. Decide if it's a right time to turn on PwrMgmt bit of all
-		   outgoiing frames
-		2. Calculate ChannelQuality based on statistics of the last
-		   period, so that TX rate won't toggling very frequently between a
-		   successful TX and a failed TX.
-		3. If the calculated ChannelQuality indicated current connection not
-		   healthy, then a ROAMing attempt is tried here.
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-#define ADHOC_BEACON_LOST_TIME		(8*OS_HZ)  // 8 sec
-VOID MlmePeriodicExec(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3)
-{
-	ULONG			TxTotalCnt;
-	PRTMP_ADAPTER	pAd = (RTMP_ADAPTER *)FunctionContext;
-
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-
-	// Do nothing if the driver is starting halt state.
-	// This might happen when timer already been fired before cancel timer with mlmehalt
-	if ((RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_HALT_IN_PROGRESS |
-								fRTMP_ADAPTER_RADIO_OFF |
-								fRTMP_ADAPTER_RADIO_MEASUREMENT |
-								fRTMP_ADAPTER_RESET_IN_PROGRESS))))
-		return;
-
-	RT28XX_MLME_PRE_SANITY_CHECK(pAd);
-
-#ifdef RALINK_ATE
-	/* Do not show RSSI until "Normal 1 second Mlme PeriodicExec". */
-	if (ATE_ON(pAd))
-	{
-		if (pAd->Mlme.PeriodicRound % MLME_TASK_EXEC_MULTIPLE != (MLME_TASK_EXEC_MULTIPLE - 1))
-	{
-			pAd->Mlme.PeriodicRound ++;
-			return;
-		}
-	}
-#endif // RALINK_ATE //
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// Do nothing if monitor mode is on
-		if (MONITOR_ON(pAd))
-			return;
-
-		if (pAd->Mlme.PeriodicRound & 0x1)
-		{
-			// This is the fix for wifi 11n extension channel overlapping test case.  for 2860D
-			if (((pAd->MACVersion & 0xffff) == 0x0101) &&
-				(STA_TGN_WIFI_ON(pAd)) &&
-				(pAd->CommonCfg.IOTestParm.bToggle == FALSE))
-
-				{
-					RTMP_IO_WRITE32(pAd, TXOP_CTRL_CFG, 0x24Bf);
-					pAd->CommonCfg.IOTestParm.bToggle = TRUE;
-				}
-				else if ((STA_TGN_WIFI_ON(pAd)) &&
-						((pAd->MACVersion & 0xffff) == 0x0101))
-				{
-					RTMP_IO_WRITE32(pAd, TXOP_CTRL_CFG, 0x243f);
-					pAd->CommonCfg.IOTestParm.bToggle = FALSE;
-				}
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	pAd->bUpdateBcnCntDone = FALSE;
-
-//	RECBATimerTimeout(SystemSpecific1,FunctionContext,SystemSpecific2,SystemSpecific3);
-	pAd->Mlme.PeriodicRound ++;
-
-#ifdef RT2870
-	// execute every 100ms, update the Tx FIFO Cnt for update Tx Rate.
-	NICUpdateFifoStaCounters(pAd);
-#endif // RT2870 //
-	// execute every 500ms
-	if ((pAd->Mlme.PeriodicRound % 5 == 0) && RTMPAutoRateSwitchCheck(pAd)/*(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED))*/)
-	{
-#ifdef CONFIG_STA_SUPPORT
-		// perform dynamic tx rate switching based on past TX history
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
-					)
-				&& (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)))
-				MlmeDynamicTxRateSwitching(pAd);
-		}
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-	// Normal 1 second Mlme PeriodicExec.
-	if (pAd->Mlme.PeriodicRound %MLME_TASK_EXEC_MULTIPLE == 0)
-	{
-                pAd->Mlme.OneSecPeriodicRound ++;
-
-#ifdef RALINK_ATE
-    	if (ATE_ON(pAd))
-    	{
-			/* request from Baron : move this routine from later to here */
-			/* for showing Rx error count in ATE RXFRAME */
-            NICUpdateRawCounters(pAd);
-			if (pAd->ate.bRxFer == 1)
-			{
-				pAd->ate.RxTotalCnt += pAd->ate.RxCntPerSec;
-			    ate_print(KERN_EMERG "MlmePeriodicExec: Rx packet cnt = %d/%d\n", pAd->ate.RxCntPerSec, pAd->ate.RxTotalCnt);
-				pAd->ate.RxCntPerSec = 0;
-
-				if (pAd->ate.RxAntennaSel == 0)
-					ate_print(KERN_EMERG "MlmePeriodicExec: Rx AvgRssi0=%d, AvgRssi1=%d, AvgRssi2=%d\n\n",
-						pAd->ate.AvgRssi0, pAd->ate.AvgRssi1, pAd->ate.AvgRssi2);
-				else
-					ate_print(KERN_EMERG "MlmePeriodicExec: Rx AvgRssi=%d\n\n", pAd->ate.AvgRssi0);
-			}
-			MlmeResetRalinkCounters(pAd);
-			return;
-    	}
-#endif // RALINK_ATE //
-
-
-		if (rx_Total)
-		{
-
-			// reset counters
-			rx_AMSDU = 0;
-			rx_Total = 0;
-		}
-
-		//ORIBATimerTimeout(pAd);
-
-		// Media status changed, report to NDIS
-		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE))
-		{
-			RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE);
-			if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
-			{
-				pAd->IndicateMediaState = NdisMediaStateConnected;
-				RTMP_IndicateMediaState(pAd);
-
-			}
-			else
-			{
-				pAd->IndicateMediaState = NdisMediaStateDisconnected;
-				RTMP_IndicateMediaState(pAd);
-			}
-		}
-
-		NdisGetSystemUpTime(&pAd->Mlme.Now32);
-
-		// add the most up-to-date h/w raw counters into software variable, so that
-		// the dynamic tuning mechanism below are based on most up-to-date information
-		NICUpdateRawCounters(pAd);
-
-#ifdef RT2870
-		RT2870_WatchDog(pAd);
-#endif // RT2870 //
-
-#ifdef DOT11_N_SUPPORT
-   		// Need statistics after read counter. So put after NICUpdateRawCounters
-		ORIBATimerTimeout(pAd);
-#endif // DOT11_N_SUPPORT //
-
-		// The time period for checking antenna is according to traffic
-		{
-			if (pAd->Mlme.bEnableAutoAntennaCheck)
-			{
-				TxTotalCnt = pAd->RalinkCounters.OneSecTxNoRetryOkCount +
-								 pAd->RalinkCounters.OneSecTxRetryOkCount +
-								 pAd->RalinkCounters.OneSecTxFailCount;
-
-					// dynamic adjust antenna evaluation period according to the traffic
-				if (TxTotalCnt > 50)
-				{
-					if (pAd->Mlme.OneSecPeriodicRound % 10 == 0)
-					{
-						AsicEvaluateRxAnt(pAd);
-					}
-				}
-				else
-				{
-					if (pAd->Mlme.OneSecPeriodicRound % 3 == 0)
-					{
-						AsicEvaluateRxAnt(pAd);
-					}
-				}
-			}
-		}
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			STAMlmePeriodicExec(pAd);
-#endif // CONFIG_STA_SUPPORT //
-
-		MlmeResetRalinkCounters(pAd);
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			{
-				// When Adhoc beacon is enabled and RTS/CTS is enabled, there is a chance that hardware MAC FSM will run into a deadlock
-				// and sending CTS-to-self over and over.
-				// Software Patch Solution:
-				// 1. Polling debug state register 0x10F4 every one second.
-				// 2. If in 0x10F4 the ((bit29==1) && (bit7==1)) OR ((bit29==1) && (bit5==1)), it means the deadlock has occurred.
-				// 3. If the deadlock occurred, reset MAC/BBP by setting 0x1004 to 0x0001 for a while then setting it back to 0x000C again.
-
-				UINT32	MacReg = 0;
-
-				RTMP_IO_READ32(pAd, 0x10F4, &MacReg);
-				if (((MacReg & 0x20000000) && (MacReg & 0x80)) || ((MacReg & 0x20000000) && (MacReg & 0x20)))
-				{
-					RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x1);
-					RTMPusecDelay(1);
-					RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0xC);
-
-					DBGPRINT(RT_DEBUG_WARN,("Warning, MAC specific condition occurs \n"));
-				}
-			}
-		}
-#endif // CONFIG_STA_SUPPORT //
-
-		RT28XX_MLME_HANDLER(pAd);
-	}
-
-
-	pAd->bUpdateBcnCntDone = FALSE;
-}
-
-#ifdef CONFIG_STA_SUPPORT
-VOID STAMlmePeriodicExec(
-	PRTMP_ADAPTER pAd)
-{
-	ULONG			    TxTotalCnt;
-	int 	i;
-
-//
-// We return here in ATE mode, because the statistics
-// that ATE needs are not collected via this routine.
-//
-#ifdef RALINK_ATE
-	// It is supposed that we will never reach here in ATE mode.
-	ASSERT(!(ATE_ON(pAd)));
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-    if (pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_DISABLE)
-#endif // WPA_SUPPLICANT_SUPPORT //
-    {
-    	// WPA MIC error should block association attempt for 60 seconds
-    	if (pAd->StaCfg.bBlockAssoc && (pAd->StaCfg.LastMicErrorTime + (60 * OS_HZ) < pAd->Mlme.Now32))
-    		pAd->StaCfg.bBlockAssoc = FALSE;
-    }
-
-    if ((pAd->PreMediaState != pAd->IndicateMediaState) && (pAd->CommonCfg.bWirelessEvent))
-	{
-		if (pAd->IndicateMediaState == NdisMediaStateConnected)
-		{
-			RTMPSendWirelessEvent(pAd, IW_STA_LINKUP_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-		}
-		pAd->PreMediaState = pAd->IndicateMediaState;
-	}
-
-
-
-
-   	AsicStaBbpTuning(pAd);
-
-	TxTotalCnt = pAd->RalinkCounters.OneSecTxNoRetryOkCount +
-					 pAd->RalinkCounters.OneSecTxRetryOkCount +
-					 pAd->RalinkCounters.OneSecTxFailCount;
-
-	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
-	{
-		// update channel quality for Roaming and UI LinkQuality display
-		MlmeCalculateChannelQuality(pAd, pAd->Mlme.Now32);
-	}
-
-	// must be AFTER MlmeDynamicTxRateSwitching() because it needs to know if
-	// Radio is currently in noisy environment
-	if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-		AsicAdjustTxPower(pAd);
-
-	if (INFRA_ON(pAd))
-	{
-#ifdef QOS_DLS_SUPPORT
-		// Check DLS time out, then tear down those session
-		RTMPCheckDLSTimeOut(pAd);
-#endif // QOS_DLS_SUPPORT //
-
-		// Is PSM bit consistent with user power management policy?
-		// This is the only place that will set PSM bit ON.
-		if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
-		MlmeCheckPsmChange(pAd, pAd->Mlme.Now32);
-
-		pAd->RalinkCounters.LastOneSecTotalTxCount = TxTotalCnt;
-
-		if ((pAd->StaCfg.LastBeaconRxTime + 1*OS_HZ < pAd->Mlme.Now32) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) &&
-			((TxTotalCnt + pAd->RalinkCounters.OneSecRxOkCnt < 600)))
-		{
-			RTMPSetAGCInitValue(pAd, BW_20);
-			DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - No BEACON. restore R66 to the low bound(%d) \n", (0x2E + GET_LNA_GAIN(pAd))));
-		}
-
-        //if ((pAd->RalinkCounters.OneSecTxNoRetryOkCount == 0) &&
-        //    (pAd->RalinkCounters.OneSecTxRetryOkCount == 0))
-        {
-    		if (pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable)
-    		{
-    		    // When APSD is enabled, the period changes as 20 sec
-    			if ((pAd->Mlme.OneSecPeriodicRound % 20) == 8)
-    				RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, TRUE);
-    		}
-    		else
-    		{
-    		    // Send out a NULL frame every 10 sec to inform AP that STA is still alive (Avoid being age out)
-    			if ((pAd->Mlme.OneSecPeriodicRound % 10) == 8)
-                {
-                    if (pAd->CommonCfg.bWmmCapable)
-    					RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, TRUE);
-                    else
-						RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, FALSE);
-                }
-    		}
-        }
-
-		if (CQI_IS_DEAD(pAd->Mlme.ChannelQuality))
-			{
-			DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - No BEACON. Dead CQI. Auto Recovery attempt #%ld\n", pAd->RalinkCounters.BadCQIAutoRecoveryCount));
-			pAd->StaCfg.CCXAdjacentAPReportFlag = TRUE;
-			pAd->StaCfg.CCXAdjacentAPLinkDownTime = pAd->StaCfg.LastBeaconRxTime;
-
-			// Lost AP, send disconnect & link down event
-			LinkDown(pAd, FALSE);
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-            if (pAd->StaCfg.WpaSupplicantUP)
-			{
-                union iwreq_data    wrqu;
-                //send disassociate event to wpa_supplicant
-                memset(&wrqu, 0, sizeof(wrqu));
-                wrqu.data.flags = RT_DISASSOC_EVENT_FLAG;
-                wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL);
-            }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-            {
-                union iwreq_data    wrqu;
-                memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN);
-                wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
-            }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-
-			// RTMPPatchMacBbpBug(pAd);
-			MlmeAutoReconnectLastSSID(pAd);
-		}
-		else if (CQI_IS_BAD(pAd->Mlme.ChannelQuality))
-		{
-			pAd->RalinkCounters.BadCQIAutoRecoveryCount ++;
-			DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - Bad CQI. Auto Recovery attempt #%ld\n", pAd->RalinkCounters.BadCQIAutoRecoveryCount));
-			MlmeAutoReconnectLastSSID(pAd);
-		}
-
-		// Add auto seamless roaming
-		if (pAd->StaCfg.bFastRoaming)
-		{
-			SHORT	dBmToRoam = (SHORT)pAd->StaCfg.dBmToRoam;
-
-			DBGPRINT(RT_DEBUG_TRACE, ("Rssi=%d, dBmToRoam=%d\n", RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.LastRssi0, pAd->StaCfg.RssiSample.LastRssi1, pAd->StaCfg.RssiSample.LastRssi2), (CHAR)dBmToRoam));
-
-			if (RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.LastRssi0, pAd->StaCfg.RssiSample.LastRssi1, pAd->StaCfg.RssiSample.LastRssi2) <= (CHAR)dBmToRoam)
-			{
-				MlmeCheckForFastRoaming(pAd, pAd->Mlme.Now32);
-			}
-		}
-	}
-	else if (ADHOC_ON(pAd))
-	{
-		//radar detect
-		if ((pAd->CommonCfg.Channel > 14)
-			&& (pAd->CommonCfg.bIEEE80211H == 1)
-			&& RadarChannelCheck(pAd, pAd->CommonCfg.Channel))
-		{
-			RadarDetectPeriodic(pAd);
-		}
-
-		// If all peers leave, and this STA becomes the last one in this IBSS, then change MediaState
-		// to DISCONNECTED. But still holding this IBSS (i.e. sending BEACON) so that other STAs can
-		// join later.
-		if ((pAd->StaCfg.LastBeaconRxTime + ADHOC_BEACON_LOST_TIME < pAd->Mlme.Now32) &&
-			OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
-		{
-			MLME_START_REQ_STRUCT     StartReq;
-
-			DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - excessive BEACON lost, last STA in this IBSS, MediaState=Disconnected\n"));
-			LinkDown(pAd, FALSE);
-
-			StartParmFill(pAd, &StartReq, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen);
-			MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_START_REQ, sizeof(MLME_START_REQ_STRUCT), &StartReq);
-			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_START;
-		}
-
-		for (i = 1; i < MAX_LEN_OF_MAC_TABLE; i++)
-		{
-			MAC_TABLE_ENTRY *pEntry = &pAd->MacTab.Content[i];
-
-			if (pEntry->ValidAsCLI == FALSE)
-				continue;
-
-			if (pEntry->LastBeaconRxTime + ADHOC_BEACON_LOST_TIME < pAd->Mlme.Now32)
-				MacTableDeleteEntry(pAd, pEntry->Aid, pEntry->Addr);
-		}
-	}
-	else // no INFRA nor ADHOC connection
-	{
-
-		if (pAd->StaCfg.bScanReqIsFromWebUI &&
-            ((pAd->StaCfg.LastScanTime + 30 * OS_HZ) > pAd->Mlme.Now32))
-			goto SKIP_AUTO_SCAN_CONN;
-        else
-            pAd->StaCfg.bScanReqIsFromWebUI = FALSE;
-
-		if ((pAd->StaCfg.bAutoReconnect == TRUE)
-			&& RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP)
-			&& (MlmeValidateSSID(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen) == TRUE))
-		{
-			if ((pAd->ScanTab.BssNr==0) && (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE))
-			{
-				MLME_SCAN_REQ_STRUCT	   ScanReq;
-
-				if ((pAd->StaCfg.LastScanTime + 10 * OS_HZ) < pAd->Mlme.Now32)
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("STAMlmePeriodicExec():CNTL - ScanTab.BssNr==0, start a new ACTIVE scan SSID[%s]\n", pAd->MlmeAux.AutoReconnectSsid));
-					ScanParmFill(pAd, &ScanReq, pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen, BSS_ANY, SCAN_ACTIVE);
-					MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_SCAN_REQ, sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq);
-					pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_LIST_SCAN;
-					// Reset Missed scan number
-					pAd->StaCfg.LastScanTime = pAd->Mlme.Now32;
-				}
-				else if (pAd->StaCfg.BssType == BSS_ADHOC)	// Quit the forever scan when in a very clean room
-					MlmeAutoReconnectLastSSID(pAd);
-			}
-			else if (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE)
-			{
-				if ((pAd->Mlme.OneSecPeriodicRound % 7) == 0)
-				{
-					MlmeAutoScan(pAd);
-					pAd->StaCfg.LastScanTime = pAd->Mlme.Now32;
-				}
-				else
-				{
-#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier
-					if (pAd->CommonCfg.CarrierDetect.Enable == TRUE)
-					{
-						if ((pAd->Mlme.OneSecPeriodicRound % 5) == 1)
-							MlmeAutoReconnectLastSSID(pAd);
-					}
-					else
-#endif // CARRIER_DETECTION_SUPPORT //
-						MlmeAutoReconnectLastSSID(pAd);
-				}
-			}
-		}
-	}
-
-SKIP_AUTO_SCAN_CONN:
-
-#ifdef DOT11_N_SUPPORT
-    if ((pAd->MacTab.Content[BSSID_WCID].TXBAbitmap !=0) && (pAd->MacTab.fAnyBASession == FALSE))
-	{
-		pAd->MacTab.fAnyBASession = TRUE;
-		AsicUpdateProtect(pAd, HT_FORCERTSCTS,  ALLN_SETPROTECT, FALSE, FALSE);
-	}
-	else if ((pAd->MacTab.Content[BSSID_WCID].TXBAbitmap ==0) && (pAd->MacTab.fAnyBASession == TRUE))
-	{
-		pAd->MacTab.fAnyBASession = FALSE;
-		AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode,  ALLN_SETPROTECT, FALSE, FALSE);
-	}
-#endif // DOT11_N_SUPPORT //
-
-
-#ifdef DOT11_N_SUPPORT
-#ifdef DOT11N_DRAFT3
-	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_SCAN_2040))
-		TriEventCounterMaintenance(pAd);
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
-
-	return;
-}
-
-// Link down report
-VOID LinkDownExec(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3)
-{
-
-	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;
-
-	pAd->IndicateMediaState = NdisMediaStateDisconnected;
-	RTMP_IndicateMediaState(pAd);
-    pAd->ExtraInfo = GENERAL_LINK_DOWN;
-}
-
-// IRQL = DISPATCH_LEVEL
-VOID MlmeAutoScan(
-	IN PRTMP_ADAPTER pAd)
-{
-	// check CntlMachine.CurrState to avoid collision with NDIS SetOID request
-	if (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - Driver auto scan\n"));
-		MlmeEnqueue(pAd,
-					MLME_CNTL_STATE_MACHINE,
-					OID_802_11_BSSID_LIST_SCAN,
-					0,
-					NULL);
-		RT28XX_MLME_HANDLER(pAd);
-	}
-}
-
-// IRQL = DISPATCH_LEVEL
-VOID MlmeAutoReconnectLastSSID(
-	IN PRTMP_ADAPTER pAd)
-{
-
-
-	// check CntlMachine.CurrState to avoid collision with NDIS SetOID request
-	if ((pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) &&
-		(MlmeValidateSSID(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen) == TRUE))
-	{
-		NDIS_802_11_SSID OidSsid;
-		OidSsid.SsidLength = pAd->MlmeAux.AutoReconnectSsidLen;
-		NdisMoveMemory(OidSsid.Ssid, pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
-
-		DBGPRINT(RT_DEBUG_TRACE, ("Driver auto reconnect to last OID_802_11_SSID setting - %s, len - %d\n", pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen));
-		MlmeEnqueue(pAd,
-					MLME_CNTL_STATE_MACHINE,
-					OID_802_11_SSID,
-					sizeof(NDIS_802_11_SSID),
-					&OidSsid);
-		RT28XX_MLME_HANDLER(pAd);
-	}
-}
-#endif // CONFIG_STA_SUPPORT //
-
-/*
-	==========================================================================
-	Validate SSID for connection try and rescan purpose
-	Valid SSID will have visible chars only.
-	The valid length is from 0 to 32.
-	IRQL = DISPATCH_LEVEL
-	==========================================================================
- */
-BOOLEAN MlmeValidateSSID(
-	IN PUCHAR	pSsid,
-	IN UCHAR	SsidLen)
-{
-	int	index;
-
-	if (SsidLen > MAX_LEN_OF_SSID)
-		return (FALSE);
-
-	// Check each character value
-	for (index = 0; index < SsidLen; index++)
-	{
-		if (pSsid[index] < 0x20)
-			return (FALSE);
-	}
-
-	// All checked
-	return (TRUE);
-}
-
-VOID MlmeSelectTxRateTable(
-	IN PRTMP_ADAPTER		pAd,
-	IN PMAC_TABLE_ENTRY		pEntry,
-	IN PUCHAR				*ppTable,
-	IN PUCHAR				pTableSize,
-	IN PUCHAR				pInitTxRateIdx)
-{
-	do
-	{
-		// decide the rate table for tuning
-		if (pAd->CommonCfg.TxRateTableSize > 0)
-		{
-			*ppTable = RateSwitchTable;
-			*pTableSize = RateSwitchTable[0];
-			*pInitTxRateIdx = RateSwitchTable[1];
-
-			break;
-		}
-
-#ifdef CONFIG_STA_SUPPORT
-		if ((pAd->OpMode == OPMODE_STA) && ADHOC_ON(pAd))
-		{
-#ifdef DOT11_N_SUPPORT
-			if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) &&
-				(pEntry->HTCapability.MCSSet[0] == 0xff) &&
-				((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1)))
-			{// 11N 1S Adhoc
-				*ppTable = RateSwitchTable11N1S;
-				*pTableSize = RateSwitchTable11N1S[0];
-				*pInitTxRateIdx = RateSwitchTable11N1S[1];
-
-			}
-			else if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) &&
-					(pEntry->HTCapability.MCSSet[0] == 0xff) &&
-					(pEntry->HTCapability.MCSSet[1] == 0xff) &&
-					(pAd->Antenna.field.TxPath == 2))
-			{// 11N 2S Adhoc
-				if (pAd->LatchRfRegs.Channel <= 14)
-				{
-					*ppTable = RateSwitchTable11N2S;
-					*pTableSize = RateSwitchTable11N2S[0];
-					*pInitTxRateIdx = RateSwitchTable11N2S[1];
-				}
-				else
-				{
-					*ppTable = RateSwitchTable11N2SForABand;
-					*pTableSize = RateSwitchTable11N2SForABand[0];
-					*pInitTxRateIdx = RateSwitchTable11N2SForABand[1];
-				}
-
-			}
-			else
-#endif // DOT11_N_SUPPORT //
-				if ((pEntry->RateLen == 4)
-#ifdef DOT11_N_SUPPORT
-					&& (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)
-#endif // DOT11_N_SUPPORT //
-					)
-			{
-				*ppTable = RateSwitchTable11B;
-				*pTableSize = RateSwitchTable11B[0];
-				*pInitTxRateIdx = RateSwitchTable11B[1];
-
-			}
-			else if (pAd->LatchRfRegs.Channel <= 14)
-			{
-				*ppTable = RateSwitchTable11BG;
-				*pTableSize = RateSwitchTable11BG[0];
-				*pInitTxRateIdx = RateSwitchTable11BG[1];
-
-			}
-			else
-			{
-				*ppTable = RateSwitchTable11G;
-				*pTableSize = RateSwitchTable11G[0];
-				*pInitTxRateIdx = RateSwitchTable11G[1];
-
-			}
-			break;
-		}
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef DOT11_N_SUPPORT
-		//if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 12) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) &&
-		//	((pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1)))
-		if ((pEntry->RateLen == 12) && (pEntry->HTCapability.MCSSet[0] == 0xff) &&
-			((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->CommonCfg.TxStream == 1)))
-		{// 11BGN 1S AP
-			*ppTable = RateSwitchTable11BGN1S;
-			*pTableSize = RateSwitchTable11BGN1S[0];
-			*pInitTxRateIdx = RateSwitchTable11BGN1S[1];
-
-			break;
-		}
-
-		//else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 12) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) &&
-		//	(pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0xff) && (pAd->Antenna.field.TxPath == 2))
-		if ((pEntry->RateLen == 12) && (pEntry->HTCapability.MCSSet[0] == 0xff) &&
-			(pEntry->HTCapability.MCSSet[1] == 0xff) && (pAd->CommonCfg.TxStream == 2))
-		{// 11BGN 2S AP
-			if (pAd->LatchRfRegs.Channel <= 14)
-			{
-				*ppTable = RateSwitchTable11BGN2S;
-				*pTableSize = RateSwitchTable11BGN2S[0];
-				*pInitTxRateIdx = RateSwitchTable11BGN2S[1];
-
-			}
-			else
-			{
-				*ppTable = RateSwitchTable11BGN2SForABand;
-				*pTableSize = RateSwitchTable11BGN2SForABand[0];
-				*pInitTxRateIdx = RateSwitchTable11BGN2SForABand[1];
-
-			}
-			break;
-		}
-
-		//else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) && ((pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1)))
-		if ((pEntry->HTCapability.MCSSet[0] == 0xff) && ((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->CommonCfg.TxStream == 1)))
-		{// 11N 1S AP
-			*ppTable = RateSwitchTable11N1S;
-			*pTableSize = RateSwitchTable11N1S[0];
-			*pInitTxRateIdx = RateSwitchTable11N1S[1];
-
-			break;
-		}
-
-		//else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0xff) && (pAd->Antenna.field.TxPath == 2))
-		if ((pEntry->HTCapability.MCSSet[0] == 0xff) && (pEntry->HTCapability.MCSSet[1] == 0xff) && (pAd->CommonCfg.TxStream == 2))
-		{// 11N 2S AP
-			if (pAd->LatchRfRegs.Channel <= 14)
-			{
-			*ppTable = RateSwitchTable11N2S;
-			*pTableSize = RateSwitchTable11N2S[0];
-			*pInitTxRateIdx = RateSwitchTable11N2S[1];
-            }
-			else
-			{
-				*ppTable = RateSwitchTable11N2SForABand;
-				*pTableSize = RateSwitchTable11N2SForABand[0];
-				*pInitTxRateIdx = RateSwitchTable11N2SForABand[1];
-			}
-
-			break;
-		}
-#endif // DOT11_N_SUPPORT //
-		//else if ((pAd->StaActive.SupRateLen == 4) && (pAd->StaActive.ExtRateLen == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
-		if ((pEntry->RateLen == 4)
-#ifdef DOT11_N_SUPPORT
-//Iverson mark for Adhoc b mode,sta will use rate 54  Mbps when connect with sta b/g/n mode
-//			&& (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)
-#endif // DOT11_N_SUPPORT //
-			)
-		{// B only AP
-			*ppTable = RateSwitchTable11B;
-			*pTableSize = RateSwitchTable11B[0];
-			*pInitTxRateIdx = RateSwitchTable11B[1];
-
-			break;
-		}
-
-		//else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen > 8) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
-		if ((pEntry->RateLen > 8)
-#ifdef DOT11_N_SUPPORT
-			&& (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)
-#endif // DOT11_N_SUPPORT //
-			)
-		{// B/G  mixed AP
-			*ppTable = RateSwitchTable11BG;
-			*pTableSize = RateSwitchTable11BG[0];
-			*pInitTxRateIdx = RateSwitchTable11BG[1];
-
-			break;
-		}
-
-		//else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 8) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
-		if ((pEntry->RateLen == 8)
-#ifdef DOT11_N_SUPPORT
-			&& (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)
-#endif // DOT11_N_SUPPORT //
-			)
-		{// G only AP
-			*ppTable = RateSwitchTable11G;
-			*pTableSize = RateSwitchTable11G[0];
-			*pInitTxRateIdx = RateSwitchTable11G[1];
-
-			break;
-		}
-#ifdef DOT11_N_SUPPORT
-#endif // DOT11_N_SUPPORT //
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-#ifdef DOT11_N_SUPPORT
-			//else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
-			if ((pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0))
-#endif // DOT11_N_SUPPORT //
-			{	// Legacy mode
-				if (pAd->CommonCfg.MaxTxRate <= RATE_11)
-				{
-					*ppTable = RateSwitchTable11B;
-					*pTableSize = RateSwitchTable11B[0];
-					*pInitTxRateIdx = RateSwitchTable11B[1];
-				}
-				else if ((pAd->CommonCfg.MaxTxRate > RATE_11) && (pAd->CommonCfg.MinTxRate > RATE_11))
-				{
-					*ppTable = RateSwitchTable11G;
-					*pTableSize = RateSwitchTable11G[0];
-					*pInitTxRateIdx = RateSwitchTable11G[1];
-
-				}
-				else
-				{
-					*ppTable = RateSwitchTable11BG;
-					*pTableSize = RateSwitchTable11BG[0];
-					*pInitTxRateIdx = RateSwitchTable11BG[1];
-				}
-				break;
-			}
-#ifdef DOT11_N_SUPPORT
-			if (pAd->LatchRfRegs.Channel <= 14)
-			{
-				if (pAd->CommonCfg.TxStream == 1)
-				{
-					*ppTable = RateSwitchTable11N1S;
-					*pTableSize = RateSwitchTable11N1S[0];
-					*pInitTxRateIdx = RateSwitchTable11N1S[1];
-					DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode,default use 11N 1S AP \n"));
-				}
-				else
-				{
-					*ppTable = RateSwitchTable11N2S;
-					*pTableSize = RateSwitchTable11N2S[0];
-					*pInitTxRateIdx = RateSwitchTable11N2S[1];
-					DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode,default use 11N 2S AP \n"));
-				}
-			}
-			else
-			{
-				if (pAd->CommonCfg.TxStream == 1)
-				{
-					*ppTable = RateSwitchTable11N1S;
-					*pTableSize = RateSwitchTable11N1S[0];
-					*pInitTxRateIdx = RateSwitchTable11N1S[1];
-					DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode,default use 11N 1S AP \n"));
-				}
-				else
-				{
-					*ppTable = RateSwitchTable11N2SForABand;
-					*pTableSize = RateSwitchTable11N2SForABand[0];
-					*pInitTxRateIdx = RateSwitchTable11N2SForABand[1];
-					DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode,default use 11N 2S AP \n"));
-				}
-			}
-#endif // DOT11_N_SUPPORT //
-			DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode (SupRateLen=%d, ExtRateLen=%d, MCSSet[0]=0x%x, MCSSet[1]=0x%x)\n",
-				pAd->StaActive.SupRateLen, pAd->StaActive.ExtRateLen, pAd->StaActive.SupportedPhyInfo.MCSSet[0], pAd->StaActive.SupportedPhyInfo.MCSSet[1]));
-		}
-#endif // CONFIG_STA_SUPPORT //
-	} while(FALSE);
-}
-
-#ifdef CONFIG_STA_SUPPORT
-/*
-	==========================================================================
-	Description:
-		This routine checks if there're other APs out there capable for
-		roaming. Caller should call this routine only when Link up in INFRA mode
-		and channel quality is below CQI_GOOD_THRESHOLD.
-
-	IRQL = DISPATCH_LEVEL
-
-	Output:
-	==========================================================================
- */
-VOID MlmeCheckForRoaming(
-	IN PRTMP_ADAPTER pAd,
-	IN ULONG	Now32)
-{
-	USHORT	   i;
-	BSS_TABLE  *pRoamTab = &pAd->MlmeAux.RoamTab;
-	BSS_ENTRY  *pBss;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("==> MlmeCheckForRoaming\n"));
-	// put all roaming candidates into RoamTab, and sort in RSSI order
-	BssTableInit(pRoamTab);
-	for (i = 0; i < pAd->ScanTab.BssNr; i++)
-	{
-		pBss = &pAd->ScanTab.BssEntry[i];
-
-		if ((pBss->LastBeaconRxTime + BEACON_LOST_TIME) < Now32)
-			continue;	 // AP disappear
-		if (pBss->Rssi <= RSSI_THRESHOLD_FOR_ROAMING)
-			continue;	 // RSSI too weak. forget it.
-		if (MAC_ADDR_EQUAL(pBss->Bssid, pAd->CommonCfg.Bssid))
-			continue;	 // skip current AP
-		if (pBss->Rssi < (pAd->StaCfg.RssiSample.LastRssi0 + RSSI_DELTA))
-			continue;	 // only AP with stronger RSSI is eligible for roaming
-
-		// AP passing all above rules is put into roaming candidate table
-		NdisMoveMemory(&pRoamTab->BssEntry[pRoamTab->BssNr], pBss, sizeof(BSS_ENTRY));
-		pRoamTab->BssNr += 1;
-	}
-
-	if (pRoamTab->BssNr > 0)
-	{
-		// check CntlMachine.CurrState to avoid collision with NDIS SetOID request
-		if (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE)
-		{
-			pAd->RalinkCounters.PoorCQIRoamingCount ++;
-			DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - Roaming attempt #%ld\n", pAd->RalinkCounters.PoorCQIRoamingCount));
-			MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_MLME_ROAMING_REQ, 0, NULL);
-			RT28XX_MLME_HANDLER(pAd);
-		}
-	}
-	DBGPRINT(RT_DEBUG_TRACE, ("<== MlmeCheckForRoaming(# of candidate= %d)\n",pRoamTab->BssNr));
-}
-
-/*
-	==========================================================================
-	Description:
-		This routine checks if there're other APs out there capable for
-		roaming. Caller should call this routine only when link up in INFRA mode
-		and channel quality is below CQI_GOOD_THRESHOLD.
-
-	IRQL = DISPATCH_LEVEL
-
-	Output:
-	==========================================================================
- */
-VOID MlmeCheckForFastRoaming(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	ULONG			Now)
-{
-	USHORT		i;
-	BSS_TABLE	*pRoamTab = &pAd->MlmeAux.RoamTab;
-	BSS_ENTRY	*pBss;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("==> MlmeCheckForFastRoaming\n"));
-	// put all roaming candidates into RoamTab, and sort in RSSI order
-	BssTableInit(pRoamTab);
-	for (i = 0; i < pAd->ScanTab.BssNr; i++)
-	{
-		pBss = &pAd->ScanTab.BssEntry[i];
-
-        if ((pBss->Rssi <= -50) && (pBss->Channel == pAd->CommonCfg.Channel))
-			continue;	 // RSSI too weak. forget it.
-		if (MAC_ADDR_EQUAL(pBss->Bssid, pAd->CommonCfg.Bssid))
-			continue;	 // skip current AP
-		if (!SSID_EQUAL(pBss->Ssid, pBss->SsidLen, pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen))
-			continue;	 // skip different SSID
-        if (pBss->Rssi < (RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.LastRssi0, pAd->StaCfg.RssiSample.LastRssi1, pAd->StaCfg.RssiSample.LastRssi2) + RSSI_DELTA))
-			continue;	 // skip AP without better RSSI
-
-        DBGPRINT(RT_DEBUG_TRACE, ("LastRssi0 = %d, pBss->Rssi = %d\n", RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.LastRssi0, pAd->StaCfg.RssiSample.LastRssi1, pAd->StaCfg.RssiSample.LastRssi2), pBss->Rssi));
-		// AP passing all above rules is put into roaming candidate table
-		NdisMoveMemory(&pRoamTab->BssEntry[pRoamTab->BssNr], pBss, sizeof(BSS_ENTRY));
-		pRoamTab->BssNr += 1;
-	}
-
-	if (pRoamTab->BssNr > 0)
-	{
-		// check CntlMachine.CurrState to avoid collision with NDIS SetOID request
-		if (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE)
-		{
-			pAd->RalinkCounters.PoorCQIRoamingCount ++;
-			DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - Roaming attempt #%ld\n", pAd->RalinkCounters.PoorCQIRoamingCount));
-			MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_MLME_ROAMING_REQ, 0, NULL);
-			RT28XX_MLME_HANDLER(pAd);
-		}
-	}
-	// Maybe site survey required
-	else
-	{
-		if ((pAd->StaCfg.LastScanTime + 10 * 1000) < Now)
-		{
-			// check CntlMachine.CurrState to avoid collision with NDIS SetOID request
-			DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - Roaming, No eligable entry, try new scan!\n"));
-			pAd->StaCfg.ScanCnt = 2;
-			pAd->StaCfg.LastScanTime = Now;
-			MlmeAutoScan(pAd);
-		}
-	}
-
-    DBGPRINT(RT_DEBUG_TRACE, ("<== MlmeCheckForFastRoaming (BssNr=%d)\n", pRoamTab->BssNr));
-}
-
-/*
-	==========================================================================
-	Description:
-		This routine calculates TxPER, RxPER of the past N-sec period. And
-		according to the calculation result, ChannelQuality is calculated here
-		to decide if current AP is still doing the job.
-
-		If ChannelQuality is not good, a ROAMing attempt may be tried later.
-	Output:
-		StaCfg.ChannelQuality - 0..100
-
-	IRQL = DISPATCH_LEVEL
-
-	NOTE: This routine decide channle quality based on RX CRC error ratio.
-		Caller should make sure a function call to NICUpdateRawCounters(pAd)
-		is performed right before this routine, so that this routine can decide
-		channel quality based on the most up-to-date information
-	==========================================================================
- */
-VOID MlmeCalculateChannelQuality(
-	IN PRTMP_ADAPTER pAd,
-	IN ULONG Now32)
-{
-	ULONG TxOkCnt, TxCnt, TxPER, TxPRR;
-	ULONG RxCnt, RxPER;
-	UCHAR NorRssi;
-	CHAR  MaxRssi;
-	ULONG BeaconLostTime = BEACON_LOST_TIME;
-
-#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier
-	// longer beacon lost time when carrier detection enabled
-	if (pAd->CommonCfg.CarrierDetect.Enable == TRUE)
-	{
-		BeaconLostTime = BEACON_LOST_TIME + BEACON_LOST_TIME/2;
-	}
-#endif // CARRIER_DETECTION_SUPPORT //
-
-	MaxRssi = RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.LastRssi0, pAd->StaCfg.RssiSample.LastRssi1, pAd->StaCfg.RssiSample.LastRssi2);
-
-	//
-	// calculate TX packet error ratio and TX retry ratio - if too few TX samples, skip TX related statistics
-	//
-	TxOkCnt = pAd->RalinkCounters.OneSecTxNoRetryOkCount + pAd->RalinkCounters.OneSecTxRetryOkCount;
-	TxCnt = TxOkCnt + pAd->RalinkCounters.OneSecTxFailCount;
-	if (TxCnt < 5)
-	{
-		TxPER = 0;
-		TxPRR = 0;
-	}
-	else
-	{
-		TxPER = (pAd->RalinkCounters.OneSecTxFailCount * 100) / TxCnt;
-		TxPRR = ((TxCnt - pAd->RalinkCounters.OneSecTxNoRetryOkCount) * 100) / TxCnt;
-	}
-
-	//
-	// calculate RX PER - don't take RxPER into consideration if too few sample
-	//
-	RxCnt = pAd->RalinkCounters.OneSecRxOkCnt + pAd->RalinkCounters.OneSecRxFcsErrCnt;
-	if (RxCnt < 5)
-		RxPER = 0;
-	else
-		RxPER = (pAd->RalinkCounters.OneSecRxFcsErrCnt * 100) / RxCnt;
-
-	//
-	// decide ChannelQuality based on: 1)last BEACON received time, 2)last RSSI, 3)TxPER, and 4)RxPER
-	//
-	if (INFRA_ON(pAd) &&
-		(pAd->RalinkCounters.OneSecTxNoRetryOkCount < 2) && // no heavy traffic
-		(pAd->StaCfg.LastBeaconRxTime + BeaconLostTime < Now32))
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("BEACON lost > %ld msec with TxOkCnt=%ld -> CQI=0\n", BeaconLostTime, TxOkCnt));
-		pAd->Mlme.ChannelQuality = 0;
-	}
-	else
-	{
-		// Normalize Rssi
-		if (MaxRssi > -40)
-			NorRssi = 100;
-		else if (MaxRssi < -90)
-			NorRssi = 0;
-		else
-			NorRssi = (MaxRssi + 90) * 2;
-
-		// ChannelQuality = W1*RSSI + W2*TxPRR + W3*RxPER	 (RSSI 0..100), (TxPER 100..0), (RxPER 100..0)
-		pAd->Mlme.ChannelQuality = (RSSI_WEIGHTING * NorRssi +
-								   TX_WEIGHTING * (100 - TxPRR) +
-								   RX_WEIGHTING* (100 - RxPER)) / 100;
-		if (pAd->Mlme.ChannelQuality >= 100)
-			pAd->Mlme.ChannelQuality = 100;
-	}
-
-}
-
-VOID MlmeSetTxRate(
-	IN PRTMP_ADAPTER		pAd,
-	IN PMAC_TABLE_ENTRY		pEntry,
-	IN PRTMP_TX_RATE_SWITCH	pTxRate)
-{
-	UCHAR	MaxMode = MODE_OFDM;
-
-#ifdef DOT11_N_SUPPORT
-	MaxMode = MODE_HTGREENFIELD;
-
-	if (pTxRate->STBC && (pAd->StaCfg.MaxHTPhyMode.field.STBC) && (pAd->Antenna.field.TxPath == 2))
-		pAd->StaCfg.HTPhyMode.field.STBC = STBC_USE;
-	else
-#endif // DOT11_N_SUPPORT //
-		pAd->StaCfg.HTPhyMode.field.STBC = STBC_NONE;
-
-	if (pTxRate->CurrMCS < MCS_AUTO)
-		pAd->StaCfg.HTPhyMode.field.MCS = pTxRate->CurrMCS;
-
-	if (pAd->StaCfg.HTPhyMode.field.MCS > 7)
-		pAd->StaCfg.HTPhyMode.field.STBC = STBC_NONE;
-
-   	if (ADHOC_ON(pAd))
-	{
-		// If peer adhoc is b-only mode, we can't send 11g rate.
-		pAd->StaCfg.HTPhyMode.field.ShortGI = GI_800;
-		pEntry->HTPhyMode.field.STBC	= STBC_NONE;
-
-		//
-		// For Adhoc MODE_CCK, driver will use AdhocBOnlyJoined flag to roll back to B only if necessary
-		//
-		pEntry->HTPhyMode.field.MODE	= pTxRate->Mode;
-		pEntry->HTPhyMode.field.ShortGI	= pAd->StaCfg.HTPhyMode.field.ShortGI;
-		pEntry->HTPhyMode.field.MCS		= pAd->StaCfg.HTPhyMode.field.MCS;
-
-		// Patch speed error in status page
-		pAd->StaCfg.HTPhyMode.field.MODE = pEntry->HTPhyMode.field.MODE;
-	}
-	else
-	{
-		if (pTxRate->Mode <= MaxMode)
-			pAd->StaCfg.HTPhyMode.field.MODE = pTxRate->Mode;
-
-#ifdef DOT11_N_SUPPORT
-		if (pTxRate->ShortGI && (pAd->StaCfg.MaxHTPhyMode.field.ShortGI))
-			pAd->StaCfg.HTPhyMode.field.ShortGI = GI_400;
-		else
-#endif // DOT11_N_SUPPORT //
-			pAd->StaCfg.HTPhyMode.field.ShortGI = GI_800;
-
-#ifdef DOT11_N_SUPPORT
-		// Reexam each bandwidth's SGI support.
-		if (pAd->StaCfg.HTPhyMode.field.ShortGI == GI_400)
-		{
-			if ((pEntry->HTPhyMode.field.BW == BW_20) && (!CLIENT_STATUS_TEST_FLAG(pEntry, fCLIENT_STATUS_SGI20_CAPABLE)))
-				pAd->StaCfg.HTPhyMode.field.ShortGI = GI_800;
-			if ((pEntry->HTPhyMode.field.BW == BW_40) && (!CLIENT_STATUS_TEST_FLAG(pEntry, fCLIENT_STATUS_SGI40_CAPABLE)))
-				pAd->StaCfg.HTPhyMode.field.ShortGI = GI_800;
-		}
-
-		// Turn RTS/CTS rate to 6Mbps.
-		if ((pEntry->HTPhyMode.field.MCS == 0) && (pAd->StaCfg.HTPhyMode.field.MCS != 0))
-		{
-			pEntry->HTPhyMode.field.MCS		= pAd->StaCfg.HTPhyMode.field.MCS;
-			if (pAd->MacTab.fAnyBASession)
-			{
-				AsicUpdateProtect(pAd, HT_FORCERTSCTS, ALLN_SETPROTECT, TRUE, (BOOLEAN)pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent);
-			}
-			else
-			{
-				AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode, ALLN_SETPROTECT, TRUE, (BOOLEAN)pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent);
-			}
-		}
-		else if ((pEntry->HTPhyMode.field.MCS == 8) && (pAd->StaCfg.HTPhyMode.field.MCS != 8))
-		{
-			pEntry->HTPhyMode.field.MCS		= pAd->StaCfg.HTPhyMode.field.MCS;
-			if (pAd->MacTab.fAnyBASession)
-			{
-				AsicUpdateProtect(pAd, HT_FORCERTSCTS, ALLN_SETPROTECT, TRUE, (BOOLEAN)pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent);
-			}
-			else
-			{
-				AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode, ALLN_SETPROTECT, TRUE, (BOOLEAN)pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent);
-			}
-		}
-		else if ((pEntry->HTPhyMode.field.MCS != 0) && (pAd->StaCfg.HTPhyMode.field.MCS == 0))
-		{
-			AsicUpdateProtect(pAd, HT_RTSCTS_6M, ALLN_SETPROTECT, TRUE, (BOOLEAN)pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent);
-
-		}
-		else if ((pEntry->HTPhyMode.field.MCS != 8) && (pAd->StaCfg.HTPhyMode.field.MCS == 8))
-		{
-			AsicUpdateProtect(pAd, HT_RTSCTS_6M, ALLN_SETPROTECT, TRUE, (BOOLEAN)pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent);
-		}
-#endif // DOT11_N_SUPPORT //
-
-		pEntry->HTPhyMode.field.STBC	= pAd->StaCfg.HTPhyMode.field.STBC;
-		pEntry->HTPhyMode.field.ShortGI	= pAd->StaCfg.HTPhyMode.field.ShortGI;
-		pEntry->HTPhyMode.field.MCS		= pAd->StaCfg.HTPhyMode.field.MCS;
-		pEntry->HTPhyMode.field.MODE	= pAd->StaCfg.HTPhyMode.field.MODE;
-#ifdef DOT11_N_SUPPORT
-		if ((pAd->StaCfg.MaxHTPhyMode.field.MODE == MODE_HTGREENFIELD) &&
-		    pAd->WIFItestbed.bGreenField)
-		    pEntry->HTPhyMode.field.MODE = MODE_HTGREENFIELD;
-#endif // DOT11_N_SUPPORT //
-	}
-
-	pAd->LastTxRate = (USHORT)(pEntry->HTPhyMode.word);
-}
-
-/*
-	==========================================================================
-	Description:
-		This routine calculates the acumulated TxPER of eaxh TxRate. And
-		according to the calculation result, change CommonCfg.TxRate which
-		is the stable TX Rate we expect the Radio situation could sustained.
-
-		CommonCfg.TxRate will change dynamically within {RATE_1/RATE_6, MaxTxRate}
-	Output:
-		CommonCfg.TxRate -
-
-	IRQL = DISPATCH_LEVEL
-
-	NOTE:
-		call this routine every second
-	==========================================================================
- */
-VOID MlmeDynamicTxRateSwitching(
-	IN PRTMP_ADAPTER pAd)
-{
-	UCHAR					UpRateIdx = 0, DownRateIdx = 0, CurrRateIdx;
-	ULONG					i, AccuTxTotalCnt = 0, TxTotalCnt;
-	ULONG					TxErrorRatio = 0;
-	BOOLEAN					bTxRateChanged, bUpgradeQuality = FALSE;
-	PRTMP_TX_RATE_SWITCH	pCurrTxRate, pNextTxRate = NULL;
-	PUCHAR					pTable;
-	UCHAR					TableSize = 0;
-	UCHAR					InitTxRateIdx = 0, TrainUp, TrainDown;
-	CHAR					Rssi, RssiOffset = 0;
-	TX_STA_CNT1_STRUC		StaTx1;
-	TX_STA_CNT0_STRUC		TxStaCnt0;
-	ULONG					TxRetransmit = 0, TxSuccess = 0, TxFailCount = 0;
-	MAC_TABLE_ENTRY			*pEntry;
-
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-	{
-		return;
-	}
-#endif // RALINK_ATE //
-
-	//
-	// walk through MAC table, see if need to change AP's TX rate toward each entry
-	//
-   	for (i = 1; i < MAX_LEN_OF_MAC_TABLE; i++)
-	{
-		pEntry = &pAd->MacTab.Content[i];
-
-		// check if this entry need to switch rate automatically
-		if (RTMPCheckEntryEnableAutoRateSwitch(pAd, pEntry) == FALSE)
-			continue;
-
-		if ((pAd->MacTab.Size == 1) || (pEntry->ValidAsDls))
-		{
-			Rssi = RTMPMaxRssi(pAd,
-							   pAd->StaCfg.RssiSample.AvgRssi0,
-							   pAd->StaCfg.RssiSample.AvgRssi1,
-							   pAd->StaCfg.RssiSample.AvgRssi2);
-
-			// Update statistic counter
-			RTMP_IO_READ32(pAd, TX_STA_CNT0, &TxStaCnt0.word);
-			RTMP_IO_READ32(pAd, TX_STA_CNT1, &StaTx1.word);
-			pAd->bUpdateBcnCntDone = TRUE;
-			TxRetransmit = StaTx1.field.TxRetransmit;
-			TxSuccess = StaTx1.field.TxSuccess;
-			TxFailCount = TxStaCnt0.field.TxFailCount;
-			TxTotalCnt = TxRetransmit + TxSuccess + TxFailCount;
-
-			pAd->RalinkCounters.OneSecTxRetryOkCount += StaTx1.field.TxRetransmit;
-			pAd->RalinkCounters.OneSecTxNoRetryOkCount += StaTx1.field.TxSuccess;
-			pAd->RalinkCounters.OneSecTxFailCount += TxStaCnt0.field.TxFailCount;
-			pAd->WlanCounters.TransmittedFragmentCount.u.LowPart += StaTx1.field.TxSuccess;
-			pAd->WlanCounters.RetryCount.u.LowPart += StaTx1.field.TxRetransmit;
-			pAd->WlanCounters.FailedCount.u.LowPart += TxStaCnt0.field.TxFailCount;
-
-			// if no traffic in the past 1-sec period, don't change TX rate,
-			// but clear all bad history. because the bad history may affect the next
-			// Chariot throughput test
-			AccuTxTotalCnt = pAd->RalinkCounters.OneSecTxNoRetryOkCount +
-						 pAd->RalinkCounters.OneSecTxRetryOkCount +
-						 pAd->RalinkCounters.OneSecTxFailCount;
-
-			if (TxTotalCnt)
-				TxErrorRatio = ((TxRetransmit + TxFailCount) * 100) / TxTotalCnt;
-		}
-		else
-		{
-			if (INFRA_ON(pAd) && (i == 1))
-				Rssi = RTMPMaxRssi(pAd,
-								   pAd->StaCfg.RssiSample.AvgRssi0,
-								   pAd->StaCfg.RssiSample.AvgRssi1,
-								   pAd->StaCfg.RssiSample.AvgRssi2);
-			else
-				Rssi = RTMPMaxRssi(pAd,
-								   pEntry->RssiSample.AvgRssi0,
-								   pEntry->RssiSample.AvgRssi1,
-								   pEntry->RssiSample.AvgRssi2);
-
-			TxTotalCnt = pEntry->OneSecTxNoRetryOkCount +
-				 pEntry->OneSecTxRetryOkCount +
-				 pEntry->OneSecTxFailCount;
-
-			if (TxTotalCnt)
-				TxErrorRatio = ((pEntry->OneSecTxRetryOkCount + pEntry->OneSecTxFailCount) * 100) / TxTotalCnt;
-		}
-
-		CurrRateIdx = pEntry->CurrTxRateIndex;
-
-		MlmeSelectTxRateTable(pAd, pEntry, &pTable, &TableSize, &InitTxRateIdx);
-
-		if (CurrRateIdx >= TableSize)
-		{
-			CurrRateIdx = TableSize - 1;
-		}
-
-		// When switch from Fixed rate -> auto rate, the REAL TX rate might be different from pAd->CommonCfg.TxRateIndex.
-		// So need to sync here.
-		pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(CurrRateIdx+1)*5];
-		if ((pEntry->HTPhyMode.field.MCS != pCurrTxRate->CurrMCS)
-			//&& (pAd->StaCfg.bAutoTxRateSwitch == TRUE)
-			)
-		{
-
-			// Need to sync Real Tx rate and our record.
-			// Then return for next DRS.
-			pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(InitTxRateIdx+1)*5];
-			pEntry->CurrTxRateIndex = InitTxRateIdx;
-			MlmeSetTxRate(pAd, pEntry, pCurrTxRate);
-
-			// reset all OneSecTx counters
-			RESET_ONE_SEC_TX_CNT(pEntry);
-			continue;
-		}
-
-		// decide the next upgrade rate and downgrade rate, if any
-		if ((CurrRateIdx > 0) && (CurrRateIdx < (TableSize - 1)))
-		{
-			UpRateIdx = CurrRateIdx + 1;
-			DownRateIdx = CurrRateIdx -1;
-		}
-		else if (CurrRateIdx == 0)
-		{
-			UpRateIdx = CurrRateIdx + 1;
-			DownRateIdx = CurrRateIdx;
-		}
-		else if (CurrRateIdx == (TableSize - 1))
-		{
-			UpRateIdx = CurrRateIdx;
-			DownRateIdx = CurrRateIdx - 1;
-		}
-
-		pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(CurrRateIdx+1)*5];
-
-#ifdef DOT11_N_SUPPORT
-		if ((Rssi > -65) && (pCurrTxRate->Mode >= MODE_HTMIX))
-		{
-			TrainUp		= (pCurrTxRate->TrainUp + (pCurrTxRate->TrainUp >> 1));
-			TrainDown	= (pCurrTxRate->TrainDown + (pCurrTxRate->TrainDown >> 1));
-		}
-		else
-#endif // DOT11_N_SUPPORT //
-		{
-			TrainUp		= pCurrTxRate->TrainUp;
-			TrainDown	= pCurrTxRate->TrainDown;
-		}
-
-		//pAd->DrsCounters.LastTimeTxRateChangeAction = pAd->DrsCounters.LastSecTxRateChangeAction;
-
-		//
-		// Keep the last time TxRateChangeAction status.
-		//
-		pEntry->LastTimeTxRateChangeAction = pEntry->LastSecTxRateChangeAction;
-
-
-
-		//
-		// CASE 1. when TX samples are fewer than 15, then decide TX rate solely on RSSI
-		//         (criteria copied from RT2500 for Netopia case)
-		//
-		if (TxTotalCnt <= 15)
-		{
-			CHAR	idx = 0;
-			UCHAR	TxRateIdx;
-			//UCHAR	MCS0 = 0, MCS1 = 0, MCS2 = 0, MCS3 = 0, MCS4 = 0, MCS7 = 0, MCS12 = 0, MCS13 = 0, MCS14 = 0, MCS15 = 0;
-			UCHAR	MCS0 = 0, MCS1 = 0, MCS2 = 0, MCS3 = 0, MCS4 = 0,  MCS5 =0, MCS6 = 0, MCS7 = 0;
-	        UCHAR	MCS12 = 0, MCS13 = 0, MCS14 = 0, MCS15 = 0;
-			UCHAR	MCS20 = 0, MCS21 = 0, MCS22 = 0, MCS23 = 0; // 3*3
-
-			// check the existence and index of each needed MCS
-			while (idx < pTable[0])
-			{
-				pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(idx+1)*5];
-
-				if (pCurrTxRate->CurrMCS == MCS_0)
-				{
-					MCS0 = idx;
-				}
-				else if (pCurrTxRate->CurrMCS == MCS_1)
-				{
-					MCS1 = idx;
-				}
-				else if (pCurrTxRate->CurrMCS == MCS_2)
-				{
-					MCS2 = idx;
-				}
-				else if (pCurrTxRate->CurrMCS == MCS_3)
-				{
-					MCS3 = idx;
-				}
-				else if (pCurrTxRate->CurrMCS == MCS_4)
-				{
-					MCS4 = idx;
-				}
-	            else if (pCurrTxRate->CurrMCS == MCS_5)
-	            {
-	                MCS5 = idx;
-	            }
-	            else if (pCurrTxRate->CurrMCS == MCS_6)
-	            {
-	                MCS6 = idx;
-	            }
-				//else if (pCurrTxRate->CurrMCS == MCS_7)
-				else if ((pCurrTxRate->CurrMCS == MCS_7) && (pCurrTxRate->ShortGI == GI_800))	// prevent the highest MCS using short GI when 1T and low throughput
-				{
-					MCS7 = idx;
-				}
-				else if (pCurrTxRate->CurrMCS == MCS_12)
-				{
-					MCS12 = idx;
-				}
-				else if (pCurrTxRate->CurrMCS == MCS_13)
-				{
-					MCS13 = idx;
-				}
-				else if (pCurrTxRate->CurrMCS == MCS_14)
-				{
-					MCS14 = idx;
-				}
-				else if ((pCurrTxRate->CurrMCS == MCS_15) && (pCurrTxRate->ShortGI == GI_800))
-				{
-					MCS15 = idx;
-				}
-				else if (pCurrTxRate->CurrMCS == MCS_20) // 3*3
-				{
-					MCS20 = idx;
-				}
-				else if (pCurrTxRate->CurrMCS == MCS_21)
-				{
-					MCS21 = idx;
-				}
-				else if (pCurrTxRate->CurrMCS == MCS_22)
-				{
-					MCS22 = idx;
-				}
-				else if (pCurrTxRate->CurrMCS == MCS_23)
-				{
-					MCS23 = idx;
-				}
-				idx ++;
-			}
-
-			if (pAd->LatchRfRegs.Channel <= 14)
-			{
-				if (pAd->NicConfig2.field.ExternalLNAForG)
-				{
-					RssiOffset = 2;
-				}
-				else
-				{
-					RssiOffset = 5;
-				}
-			}
-			else
-			{
-				if (pAd->NicConfig2.field.ExternalLNAForA)
-				{
-					RssiOffset = 5;
-				}
-				else
-				{
-					RssiOffset = 8;
-				}
-			}
-#ifdef DOT11_N_SUPPORT
-			/*if (MCS15)*/
-			if ((pTable == RateSwitchTable11BGN3S) ||
-				(pTable == RateSwitchTable11N3S) ||
-				(pTable == RateSwitchTable))
-			{// N mode with 3 stream // 3*3
-				if (MCS23 && (Rssi >= -70))
-					TxRateIdx = MCS15;
-				else if (MCS22 && (Rssi >= -72))
-					TxRateIdx = MCS14;
-        	    else if (MCS21 && (Rssi >= -76))
-					TxRateIdx = MCS13;
-				else if (MCS20 && (Rssi >= -78))
-					TxRateIdx = MCS12;
-			else if (MCS4 && (Rssi >= -82))
-				TxRateIdx = MCS4;
-			else if (MCS3 && (Rssi >= -84))
-				TxRateIdx = MCS3;
-			else if (MCS2 && (Rssi >= -86))
-				TxRateIdx = MCS2;
-			else if (MCS1 && (Rssi >= -88))
-				TxRateIdx = MCS1;
-			else
-				TxRateIdx = MCS0;
-		}
-//		else if ((pTable == RateSwitchTable11BGN2S) || (pTable == RateSwitchTable11BGN2SForABand) ||(pTable == RateSwitchTable11N2S) ||(pTable == RateSwitchTable11N2SForABand) || (pTable == RateSwitchTable))
-		else if ((pTable == RateSwitchTable11BGN2S) || (pTable == RateSwitchTable11BGN2SForABand) ||(pTable == RateSwitchTable11N2S) ||(pTable == RateSwitchTable11N2SForABand)) // 3*3
-			{// N mode with 2 stream
-				if (MCS15 && (Rssi >= (-70+RssiOffset)))
-					TxRateIdx = MCS15;
-				else if (MCS14 && (Rssi >= (-72+RssiOffset)))
-					TxRateIdx = MCS14;
-				else if (MCS13 && (Rssi >= (-76+RssiOffset)))
-					TxRateIdx = MCS13;
-				else if (MCS12 && (Rssi >= (-78+RssiOffset)))
-					TxRateIdx = MCS12;
-				else if (MCS4 && (Rssi >= (-82+RssiOffset)))
-					TxRateIdx = MCS4;
-				else if (MCS3 && (Rssi >= (-84+RssiOffset)))
-					TxRateIdx = MCS3;
-				else if (MCS2 && (Rssi >= (-86+RssiOffset)))
-					TxRateIdx = MCS2;
-				else if (MCS1 && (Rssi >= (-88+RssiOffset)))
-					TxRateIdx = MCS1;
-				else
-					TxRateIdx = MCS0;
-			}
-			else if ((pTable == RateSwitchTable11BGN1S) || (pTable == RateSwitchTable11N1S))
-			{// N mode with 1 stream
-				if (MCS7 && (Rssi > (-72+RssiOffset)))
-					TxRateIdx = MCS7;
-				else if (MCS6 && (Rssi > (-74+RssiOffset)))
-					TxRateIdx = MCS6;
-				else if (MCS5 && (Rssi > (-77+RssiOffset)))
-					TxRateIdx = MCS5;
-				else if (MCS4 && (Rssi > (-79+RssiOffset)))
-					TxRateIdx = MCS4;
-				else if (MCS3 && (Rssi > (-81+RssiOffset)))
-					TxRateIdx = MCS3;
-				else if (MCS2 && (Rssi > (-83+RssiOffset)))
-					TxRateIdx = MCS2;
-				else if (MCS1 && (Rssi > (-86+RssiOffset)))
-					TxRateIdx = MCS1;
-				else
-					TxRateIdx = MCS0;
-			}
-			else
-#endif // DOT11_N_SUPPORT //
-			{// Legacy mode
-				if (MCS7 && (Rssi > -70))
-					TxRateIdx = MCS7;
-				else if (MCS6 && (Rssi > -74))
-					TxRateIdx = MCS6;
-				else if (MCS5 && (Rssi > -78))
-					TxRateIdx = MCS5;
-				else if (MCS4 && (Rssi > -82))
-					TxRateIdx = MCS4;
-				else if (MCS4 == 0)	// for B-only mode
-					TxRateIdx = MCS3;
-				else if (MCS3 && (Rssi > -85))
-					TxRateIdx = MCS3;
-				else if (MCS2 && (Rssi > -87))
-					TxRateIdx = MCS2;
-				else if (MCS1 && (Rssi > -90))
-					TxRateIdx = MCS1;
-				else
-					TxRateIdx = MCS0;
-			}
-
-	//		if (TxRateIdx != pAd->CommonCfg.TxRateIndex)
-			{
-				pEntry->CurrTxRateIndex = TxRateIdx;
-				pNextTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(pEntry->CurrTxRateIndex+1)*5];
-				MlmeSetTxRate(pAd, pEntry, pNextTxRate);
-			}
-
-			NdisZeroMemory(pEntry->TxQuality, sizeof(USHORT) * MAX_STEP_OF_TX_RATE_SWITCH);
-			NdisZeroMemory(pEntry->PER, sizeof(UCHAR) * MAX_STEP_OF_TX_RATE_SWITCH);
-			pEntry->fLastSecAccordingRSSI = TRUE;
-			// reset all OneSecTx counters
-			RESET_ONE_SEC_TX_CNT(pEntry);
-
-			continue;
-		}
-
-		if (pEntry->fLastSecAccordingRSSI == TRUE)
-		{
-			pEntry->fLastSecAccordingRSSI = FALSE;
-			pEntry->LastSecTxRateChangeAction = 0;
-			// reset all OneSecTx counters
-			RESET_ONE_SEC_TX_CNT(pEntry);
-
-			continue;
-		}
-
-		do
-		{
-			BOOLEAN	bTrainUpDown = FALSE;
-
-			pEntry->CurrTxRateStableTime ++;
-
-			// downgrade TX quality if PER >= Rate-Down threshold
-			if (TxErrorRatio >= TrainDown)
-			{
-				bTrainUpDown = TRUE;
-				pEntry->TxQuality[CurrRateIdx] = DRS_TX_QUALITY_WORST_BOUND;
-			}
-			// upgrade TX quality if PER <= Rate-Up threshold
-			else if (TxErrorRatio <= TrainUp)
-			{
-				bTrainUpDown = TRUE;
-				bUpgradeQuality = TRUE;
-				if (pEntry->TxQuality[CurrRateIdx])
-					pEntry->TxQuality[CurrRateIdx] --;  // quality very good in CurrRate
-
-				if (pEntry->TxRateUpPenalty)
-					pEntry->TxRateUpPenalty --;
-				else if (pEntry->TxQuality[UpRateIdx])
-					pEntry->TxQuality[UpRateIdx] --;    // may improve next UP rate's quality
-			}
-
-			pEntry->PER[CurrRateIdx] = (UCHAR)TxErrorRatio;
-
-			if (bTrainUpDown)
-			{
-				// perform DRS - consider TxRate Down first, then rate up.
-				if ((CurrRateIdx != DownRateIdx) && (pEntry->TxQuality[CurrRateIdx] >= DRS_TX_QUALITY_WORST_BOUND))
-				{
-					pEntry->CurrTxRateIndex = DownRateIdx;
-				}
-				else if ((CurrRateIdx != UpRateIdx) && (pEntry->TxQuality[UpRateIdx] <= 0))
-				{
-					pEntry->CurrTxRateIndex = UpRateIdx;
-				}
-			}
-		} while (FALSE);
-
-		// if rate-up happen, clear all bad history of all TX rates
-		if (pEntry->CurrTxRateIndex > CurrRateIdx)
-		{
-			pEntry->CurrTxRateStableTime = 0;
-			pEntry->TxRateUpPenalty = 0;
-			pEntry->LastSecTxRateChangeAction = 1; // rate UP
-			NdisZeroMemory(pEntry->TxQuality, sizeof(USHORT) * MAX_STEP_OF_TX_RATE_SWITCH);
-			NdisZeroMemory(pEntry->PER, sizeof(UCHAR) * MAX_STEP_OF_TX_RATE_SWITCH);
-
-			//
-			// For TxRate fast train up
-			//
-			if (!pAd->StaCfg.StaQuickResponeForRateUpTimerRunning)
-			{
-				RTMPSetTimer(&pAd->StaCfg.StaQuickResponeForRateUpTimer, 100);
-
-				pAd->StaCfg.StaQuickResponeForRateUpTimerRunning = TRUE;
-			}
-			bTxRateChanged = TRUE;
-		}
-		// if rate-down happen, only clear DownRate's bad history
-		else if (pEntry->CurrTxRateIndex < CurrRateIdx)
-		{
-			pEntry->CurrTxRateStableTime = 0;
-			pEntry->TxRateUpPenalty = 0;           // no penalty
-			pEntry->LastSecTxRateChangeAction = 2; // rate DOWN
-			pEntry->TxQuality[pEntry->CurrTxRateIndex] = 0;
-			pEntry->PER[pEntry->CurrTxRateIndex] = 0;
-
-			//
-			// For TxRate fast train down
-			//
-			if (!pAd->StaCfg.StaQuickResponeForRateUpTimerRunning)
-			{
-				RTMPSetTimer(&pAd->StaCfg.StaQuickResponeForRateUpTimer, 100);
-
-				pAd->StaCfg.StaQuickResponeForRateUpTimerRunning = TRUE;
-			}
-			bTxRateChanged = TRUE;
-		}
-		else
-		{
-			pEntry->LastSecTxRateChangeAction = 0; // rate no change
-			bTxRateChanged = FALSE;
-		}
-
-		pEntry->LastTxOkCount = TxSuccess;
-
-		// reset all OneSecTx counters
-		RESET_ONE_SEC_TX_CNT(pEntry);
-
-		pNextTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(pEntry->CurrTxRateIndex+1)*5];
-		if (bTxRateChanged && pNextTxRate)
-		{
-			MlmeSetTxRate(pAd, pEntry, pNextTxRate);
-		}
-	}
-}
-
-/*
-	========================================================================
-	Routine Description:
-		Station side, Auto TxRate faster train up timer call back function.
-
-	Arguments:
-		SystemSpecific1			- Not used.
-		FunctionContext			- Pointer to our Adapter context.
-		SystemSpecific2			- Not used.
-		SystemSpecific3			- Not used.
-
-	Return Value:
-		None
-
-	========================================================================
-*/
-VOID StaQuickResponeForRateUpExec(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3)
-{
-	PRTMP_ADAPTER			pAd = (PRTMP_ADAPTER)FunctionContext;
-	UCHAR					UpRateIdx = 0, DownRateIdx = 0, CurrRateIdx = 0;
-	ULONG					TxTotalCnt;
-	ULONG					TxErrorRatio = 0;
-	BOOLEAN					bTxRateChanged; //, bUpgradeQuality = FALSE;
-	PRTMP_TX_RATE_SWITCH	pCurrTxRate, pNextTxRate = NULL;
-	PUCHAR					pTable;
-	UCHAR					TableSize = 0;
-	UCHAR					InitTxRateIdx = 0, TrainUp, TrainDown;
-	TX_STA_CNT1_STRUC		StaTx1;
-	TX_STA_CNT0_STRUC		TxStaCnt0;
-	CHAR					Rssi, ratio;
-	ULONG					TxRetransmit = 0, TxSuccess = 0, TxFailCount = 0;
-	MAC_TABLE_ENTRY			*pEntry;
-	ULONG					i;
-
-	pAd->StaCfg.StaQuickResponeForRateUpTimerRunning = FALSE;
-
-    //
-    // walk through MAC table, see if need to change AP's TX rate toward each entry
-    //
-	for (i = 1; i < MAX_LEN_OF_MAC_TABLE; i++)
-	{
-		pEntry = &pAd->MacTab.Content[i];
-
-		// check if this entry need to switch rate automatically
-		if (RTMPCheckEntryEnableAutoRateSwitch(pAd, pEntry) == FALSE)
-			continue;
-
-		if (INFRA_ON(pAd) && (i == 1))
-			Rssi = RTMPMaxRssi(pAd,
-							   pAd->StaCfg.RssiSample.AvgRssi0,
-							   pAd->StaCfg.RssiSample.AvgRssi1,
-							   pAd->StaCfg.RssiSample.AvgRssi2);
-		else
-			Rssi = RTMPMaxRssi(pAd,
-							   pEntry->RssiSample.AvgRssi0,
-							   pEntry->RssiSample.AvgRssi1,
-							   pEntry->RssiSample.AvgRssi2);
-
-		CurrRateIdx = pAd->CommonCfg.TxRateIndex;
-
-			MlmeSelectTxRateTable(pAd, pEntry, &pTable, &TableSize, &InitTxRateIdx);
-
-		// decide the next upgrade rate and downgrade rate, if any
-		if ((CurrRateIdx > 0) && (CurrRateIdx < (TableSize - 1)))
-		{
-			UpRateIdx = CurrRateIdx + 1;
-			DownRateIdx = CurrRateIdx -1;
-		}
-		else if (CurrRateIdx == 0)
-		{
-			UpRateIdx = CurrRateIdx + 1;
-			DownRateIdx = CurrRateIdx;
-		}
-		else if (CurrRateIdx == (TableSize - 1))
-		{
-			UpRateIdx = CurrRateIdx;
-			DownRateIdx = CurrRateIdx - 1;
-		}
-
-		pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(CurrRateIdx+1)*5];
-
-#ifdef DOT11_N_SUPPORT
-		if ((Rssi > -65) && (pCurrTxRate->Mode >= MODE_HTMIX))
-		{
-			TrainUp		= (pCurrTxRate->TrainUp + (pCurrTxRate->TrainUp >> 1));
-			TrainDown	= (pCurrTxRate->TrainDown + (pCurrTxRate->TrainDown >> 1));
-		}
-		else
-#endif // DOT11_N_SUPPORT //
-		{
-			TrainUp		= pCurrTxRate->TrainUp;
-			TrainDown	= pCurrTxRate->TrainDown;
-		}
-
-		if (pAd->MacTab.Size == 1)
-		{
-			// Update statistic counter
-			RTMP_IO_READ32(pAd, TX_STA_CNT0, &TxStaCnt0.word);
-			RTMP_IO_READ32(pAd, TX_STA_CNT1, &StaTx1.word);
-
-			TxRetransmit = StaTx1.field.TxRetransmit;
-			TxSuccess = StaTx1.field.TxSuccess;
-			TxFailCount = TxStaCnt0.field.TxFailCount;
-			TxTotalCnt = TxRetransmit + TxSuccess + TxFailCount;
-
-			pAd->RalinkCounters.OneSecTxRetryOkCount += StaTx1.field.TxRetransmit;
-			pAd->RalinkCounters.OneSecTxNoRetryOkCount += StaTx1.field.TxSuccess;
-			pAd->RalinkCounters.OneSecTxFailCount += TxStaCnt0.field.TxFailCount;
-			pAd->WlanCounters.TransmittedFragmentCount.u.LowPart += StaTx1.field.TxSuccess;
-			pAd->WlanCounters.RetryCount.u.LowPart += StaTx1.field.TxRetransmit;
-			pAd->WlanCounters.FailedCount.u.LowPart += TxStaCnt0.field.TxFailCount;
-
-			if (TxTotalCnt)
-				TxErrorRatio = ((TxRetransmit + TxFailCount) * 100) / TxTotalCnt;
-		}
-		else
-		{
-			TxTotalCnt = pEntry->OneSecTxNoRetryOkCount +
-				 pEntry->OneSecTxRetryOkCount +
-				 pEntry->OneSecTxFailCount;
-
-			if (TxTotalCnt)
-				TxErrorRatio = ((pEntry->OneSecTxRetryOkCount + pEntry->OneSecTxFailCount) * 100) / TxTotalCnt;
-		}
-
-
-		//
-		// CASE 1. when TX samples are fewer than 15, then decide TX rate solely on RSSI
-		//         (criteria copied from RT2500 for Netopia case)
-		//
-		if (TxTotalCnt <= 12)
-		{
-			NdisZeroMemory(pAd->DrsCounters.TxQuality, sizeof(USHORT) * MAX_STEP_OF_TX_RATE_SWITCH);
-			NdisZeroMemory(pAd->DrsCounters.PER, sizeof(UCHAR) * MAX_STEP_OF_TX_RATE_SWITCH);
-
-			if ((pAd->DrsCounters.LastSecTxRateChangeAction == 1) && (CurrRateIdx != DownRateIdx))
-			{
-				pAd->CommonCfg.TxRateIndex = DownRateIdx;
-				pAd->DrsCounters.TxQuality[CurrRateIdx] = DRS_TX_QUALITY_WORST_BOUND;
-			}
-			else if ((pAd->DrsCounters.LastSecTxRateChangeAction == 2) && (CurrRateIdx != UpRateIdx))
-			{
-				pAd->CommonCfg.TxRateIndex = UpRateIdx;
-			}
-
-			DBGPRINT_RAW(RT_DEBUG_TRACE,("QuickDRS: TxTotalCnt <= 15, train back to original rate \n"));
-			return;
-		}
-
-		do
-		{
-			ULONG OneSecTxNoRetryOKRationCount;
-
-			if (pAd->DrsCounters.LastTimeTxRateChangeAction == 0)
-				ratio = 5;
-			else
-				ratio = 4;
-
-			// downgrade TX quality if PER >= Rate-Down threshold
-			if (TxErrorRatio >= TrainDown)
-			{
-				pAd->DrsCounters.TxQuality[CurrRateIdx] = DRS_TX_QUALITY_WORST_BOUND;
-			}
-
-			pAd->DrsCounters.PER[CurrRateIdx] = (UCHAR)TxErrorRatio;
-
-			OneSecTxNoRetryOKRationCount = (TxSuccess * ratio);
-
-			// perform DRS - consider TxRate Down first, then rate up.
-			if ((pAd->DrsCounters.LastSecTxRateChangeAction == 1) && (CurrRateIdx != DownRateIdx))
-			{
-				if ((pAd->DrsCounters.LastTxOkCount + 2) >= OneSecTxNoRetryOKRationCount)
-				{
-					pAd->CommonCfg.TxRateIndex = DownRateIdx;
-					pAd->DrsCounters.TxQuality[CurrRateIdx] = DRS_TX_QUALITY_WORST_BOUND;
-
-				}
-
-			}
-			else if ((pAd->DrsCounters.LastSecTxRateChangeAction == 2) && (CurrRateIdx != UpRateIdx))
-			{
-				if ((TxErrorRatio >= 50) || (TxErrorRatio >= TrainDown))
-				{
-
-				}
-				else if ((pAd->DrsCounters.LastTxOkCount + 2) >= OneSecTxNoRetryOKRationCount)
-				{
-					pAd->CommonCfg.TxRateIndex = UpRateIdx;
-				}
-			}
-		}while (FALSE);
-
-		// if rate-up happen, clear all bad history of all TX rates
-		if (pAd->CommonCfg.TxRateIndex > CurrRateIdx)
-		{
-			pAd->DrsCounters.TxRateUpPenalty = 0;
-			NdisZeroMemory(pAd->DrsCounters.TxQuality, sizeof(USHORT) * MAX_STEP_OF_TX_RATE_SWITCH);
-			NdisZeroMemory(pAd->DrsCounters.PER, sizeof(UCHAR) * MAX_STEP_OF_TX_RATE_SWITCH);
-			bTxRateChanged = TRUE;
-		}
-		// if rate-down happen, only clear DownRate's bad history
-		else if (pAd->CommonCfg.TxRateIndex < CurrRateIdx)
-		{
-			DBGPRINT_RAW(RT_DEBUG_TRACE,("QuickDRS: --TX rate from %d to %d \n", CurrRateIdx, pAd->CommonCfg.TxRateIndex));
-
-			pAd->DrsCounters.TxRateUpPenalty = 0;           // no penalty
-			pAd->DrsCounters.TxQuality[pAd->CommonCfg.TxRateIndex] = 0;
-			pAd->DrsCounters.PER[pAd->CommonCfg.TxRateIndex] = 0;
-			bTxRateChanged = TRUE;
-		}
-		else
-		{
-			bTxRateChanged = FALSE;
-		}
-
-		pNextTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(pAd->CommonCfg.TxRateIndex+1)*5];
-		if (bTxRateChanged && pNextTxRate)
-		{
-			MlmeSetTxRate(pAd, pEntry, pNextTxRate);
-		}
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-		This routine is executed periodically inside MlmePeriodicExec() after
-		association with an AP.
-		It checks if StaCfg.Psm is consistent with user policy (recorded in
-		StaCfg.WindowsPowerMode). If not, enforce user policy. However,
-		there're some conditions to consider:
-		1. we don't support power-saving in ADHOC mode, so Psm=PWR_ACTIVE all
-		   the time when Mibss==TRUE
-		2. When link up in INFRA mode, Psm should not be switch to PWR_SAVE
-		   if outgoing traffic available in TxRing or MgmtRing.
-	Output:
-		1. change pAd->StaCfg.Psm to PWR_SAVE or leave it untouched
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID MlmeCheckPsmChange(
-	IN PRTMP_ADAPTER pAd,
-	IN ULONG	Now32)
-{
-	ULONG	PowerMode;
-
-	// condition -
-	// 1. Psm maybe ON only happen in INFRASTRUCTURE mode
-	// 2. user wants either MAX_PSP or FAST_PSP
-	// 3. but current psm is not in PWR_SAVE
-	// 4. CNTL state machine is not doing SCANning
-	// 5. no TX SUCCESS event for the past 1-sec period
-#ifdef NDIS51_MINIPORT
-	if (pAd->StaCfg.WindowsPowerProfile == NdisPowerProfileBattery)
-		PowerMode = pAd->StaCfg.WindowsBatteryPowerMode;
-	else
-#endif
-		PowerMode = pAd->StaCfg.WindowsPowerMode;
-
-	if (INFRA_ON(pAd) &&
-		(PowerMode != Ndis802_11PowerModeCAM) &&
-		(pAd->StaCfg.Psm == PWR_ACTIVE) &&
-//		(! RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-		(pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) /*&&
-		(pAd->RalinkCounters.OneSecTxNoRetryOkCount == 0) &&
-		(pAd->RalinkCounters.OneSecTxRetryOkCount == 0)*/)
-	{
-		// add by johnli, use Rx OK data count per second to calculate throughput
-		// If Ttraffic is too high ( > 400 Rx per second), don't go to sleep mode. If tx rate is low, use low criteria
-		// Mode=CCK/MCS=3 => 11 Mbps, Mode=OFDM/MCS=3 => 18 Mbps
-		if (((pAd->StaCfg.HTPhyMode.field.MCS <= 3) &&
-/* Iverson mark
-				(pAd->StaCfg.HTPhyMode.field.MODE <= MODE_OFDM) &&
-*/
-				(pAd->RalinkCounters.OneSecRxOkDataCnt < (ULONG)100)) ||
-			((pAd->StaCfg.HTPhyMode.field.MCS > 3) &&
-/* Iverson mark
-			(pAd->StaCfg.HTPhyMode.field.MODE > MODE_OFDM) &&
-*/
-			(pAd->RalinkCounters.OneSecRxOkDataCnt < (ULONG)400)))
-		{
-				// Get this time
-			NdisGetSystemUpTime(&pAd->Mlme.LastSendNULLpsmTime);
-			pAd->RalinkCounters.RxCountSinceLastNULL = 0;
-			MlmeSetPsmBit(pAd, PWR_SAVE);
-			if (!(pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable))
-			{
-				RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, FALSE);
-			}
-			else
-			{
-				RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, TRUE);
-			}
-		}
-	}
-}
-
-// IRQL = PASSIVE_LEVEL
-// IRQL = DISPATCH_LEVEL
-VOID MlmeSetPsmBit(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT psm)
-{
-	AUTO_RSP_CFG_STRUC csr4;
-
-	pAd->StaCfg.Psm = psm;
-	RTMP_IO_READ32(pAd, AUTO_RSP_CFG, &csr4.word);
-	csr4.field.AckCtsPsmBit = (psm == PWR_SAVE)? 1:0;
-	RTMP_IO_WRITE32(pAd, AUTO_RSP_CFG, csr4.word);
-}
-#endif // CONFIG_STA_SUPPORT //
-
-
-// IRQL = DISPATCH_LEVEL
-VOID MlmeSetTxPreamble(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT TxPreamble)
-{
-	AUTO_RSP_CFG_STRUC csr4;
-
-	//
-	// Always use Long preamble before verifiation short preamble functionality works well.
-	// Todo: remove the following line if short preamble functionality works
-	//
-	//TxPreamble = Rt802_11PreambleLong;
-
-	RTMP_IO_READ32(pAd, AUTO_RSP_CFG, &csr4.word);
-	if (TxPreamble == Rt802_11PreambleLong)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("MlmeSetTxPreamble (= LONG PREAMBLE)\n"));
-		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
-		csr4.field.AutoResponderPreamble = 0;
-	}
-	else
-	{
-		// NOTE: 1Mbps should always use long preamble
-		DBGPRINT(RT_DEBUG_TRACE, ("MlmeSetTxPreamble (= SHORT PREAMBLE)\n"));
-		OPSTATUS_SET_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
-		csr4.field.AutoResponderPreamble = 1;
-	}
-
-	RTMP_IO_WRITE32(pAd, AUTO_RSP_CFG, csr4.word);
-}
-
-/*
-    ==========================================================================
-    Description:
-        Update basic rate bitmap
-    ==========================================================================
- */
-
-VOID UpdateBasicRateBitmap(
-    IN  PRTMP_ADAPTER   pAdapter)
-{
-    INT  i, j;
-                  /* 1  2  5.5, 11,  6,  9, 12, 18, 24, 36, 48,  54 */
-    UCHAR rate[] = { 2, 4,  11, 22, 12, 18, 24, 36, 48, 72, 96, 108 };
-    UCHAR *sup_p = pAdapter->CommonCfg.SupRate;
-    UCHAR *ext_p = pAdapter->CommonCfg.ExtRate;
-    ULONG bitmap = pAdapter->CommonCfg.BasicRateBitmap;
-
-
-    /* if A mode, always use fix BasicRateBitMap */
-    //if (pAdapter->CommonCfg.Channel == PHY_11A)
-	if (pAdapter->CommonCfg.Channel > 14)
-        pAdapter->CommonCfg.BasicRateBitmap = 0x150; /* 6, 12, 24M */
-    /* End of if */
-
-    if (pAdapter->CommonCfg.BasicRateBitmap > 4095)
-    {
-        /* (2 ^ MAX_LEN_OF_SUPPORTED_RATES) -1 */
-        return;
-    } /* End of if */
-
-    for(i=0; i<MAX_LEN_OF_SUPPORTED_RATES; i++)
-    {
-        sup_p[i] &= 0x7f;
-        ext_p[i] &= 0x7f;
-    } /* End of for */
-
-    for(i=0; i<MAX_LEN_OF_SUPPORTED_RATES; i++)
-    {
-        if (bitmap & (1 << i))
-        {
-            for(j=0; j<MAX_LEN_OF_SUPPORTED_RATES; j++)
-            {
-                if (sup_p[j] == rate[i])
-                    sup_p[j] |= 0x80;
-                /* End of if */
-            } /* End of for */
-
-            for(j=0; j<MAX_LEN_OF_SUPPORTED_RATES; j++)
-            {
-                if (ext_p[j] == rate[i])
-                    ext_p[j] |= 0x80;
-                /* End of if */
-            } /* End of for */
-        } /* End of if */
-    } /* End of for */
-} /* End of UpdateBasicRateBitmap */
-
-// IRQL = PASSIVE_LEVEL
-// IRQL = DISPATCH_LEVEL
-// bLinkUp is to identify the inital link speed.
-// TRUE indicates the rate update at linkup, we should not try to set the rate at 54Mbps.
-VOID MlmeUpdateTxRates(
-	IN PRTMP_ADAPTER 		pAd,
-	IN 	BOOLEAN		 		bLinkUp,
-	IN	UCHAR				apidx)
-{
-	int i, num;
-	UCHAR Rate = RATE_6, MaxDesire = RATE_1, MaxSupport = RATE_1;
-	UCHAR MinSupport = RATE_54;
-	ULONG BasicRateBitmap = 0;
-	UCHAR CurrBasicRate = RATE_1;
-	UCHAR *pSupRate, SupRateLen, *pExtRate, ExtRateLen;
-	PHTTRANSMIT_SETTING		pHtPhy = NULL;
-	PHTTRANSMIT_SETTING		pMaxHtPhy = NULL;
-	PHTTRANSMIT_SETTING		pMinHtPhy = NULL;
-	BOOLEAN 				*auto_rate_cur_p;
-	UCHAR					HtMcs = MCS_AUTO;
-
-	// find max desired rate
-	UpdateBasicRateBitmap(pAd);
-
-	num = 0;
-	auto_rate_cur_p = NULL;
-	for (i=0; i<MAX_LEN_OF_SUPPORTED_RATES; i++)
-	{
-		switch (pAd->CommonCfg.DesireRate[i] & 0x7f)
-		{
-			case 2:  Rate = RATE_1;   num++;   break;
-			case 4:  Rate = RATE_2;   num++;   break;
-			case 11: Rate = RATE_5_5; num++;   break;
-			case 22: Rate = RATE_11;  num++;   break;
-			case 12: Rate = RATE_6;   num++;   break;
-			case 18: Rate = RATE_9;   num++;   break;
-			case 24: Rate = RATE_12;  num++;   break;
-			case 36: Rate = RATE_18;  num++;   break;
-			case 48: Rate = RATE_24;  num++;   break;
-			case 72: Rate = RATE_36;  num++;   break;
-			case 96: Rate = RATE_48;  num++;   break;
-			case 108: Rate = RATE_54; num++;   break;
-			//default: Rate = RATE_1;   break;
-		}
-		if (MaxDesire < Rate)  MaxDesire = Rate;
-	}
-
-//===========================================================================
-//===========================================================================
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		pHtPhy 		= &pAd->StaCfg.HTPhyMode;
-		pMaxHtPhy	= &pAd->StaCfg.MaxHTPhyMode;
-		pMinHtPhy	= &pAd->StaCfg.MinHTPhyMode;
-
-		auto_rate_cur_p = &pAd->StaCfg.bAutoTxRateSwitch;
-		HtMcs 		= pAd->StaCfg.DesiredTransmitSetting.field.MCS;
-
-		if ((pAd->StaCfg.BssType == BSS_ADHOC) &&
-			(pAd->CommonCfg.PhyMode == PHY_11B) &&
-			(MaxDesire > RATE_11))
-		{
-			MaxDesire = RATE_11;
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	pAd->CommonCfg.MaxDesiredRate = MaxDesire;
-	pMinHtPhy->word = 0;
-	pMaxHtPhy->word = 0;
-	pHtPhy->word = 0;
-
-	// Auto rate switching is enabled only if more than one DESIRED RATES are
-	// specified; otherwise disabled
-	if (num <= 1)
-	{
-		//OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED);
-		//pAd->CommonCfg.bAutoTxRateSwitch	= FALSE;
-		*auto_rate_cur_p = FALSE;
-	}
-	else
-	{
-		//OPSTATUS_SET_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED);
-		//pAd->CommonCfg.bAutoTxRateSwitch	= TRUE;
-		*auto_rate_cur_p = TRUE;
-	}
-
-#if 1
-	if (HtMcs != MCS_AUTO)
-	{
-		//OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED);
-		//pAd->CommonCfg.bAutoTxRateSwitch	= FALSE;
-		*auto_rate_cur_p = FALSE;
-	}
-	else
-	{
-		//OPSTATUS_SET_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED);
-		//pAd->CommonCfg.bAutoTxRateSwitch	= TRUE;
-		*auto_rate_cur_p = TRUE;
-	}
-#endif
-
-#ifdef CONFIG_STA_SUPPORT
-	if ((ADHOC_ON(pAd) || INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA))
-	{
-		pSupRate = &pAd->StaActive.SupRate[0];
-		pExtRate = &pAd->StaActive.ExtRate[0];
-		SupRateLen = pAd->StaActive.SupRateLen;
-		ExtRateLen = pAd->StaActive.ExtRateLen;
-	}
-	else
-#endif // CONFIG_STA_SUPPORT //
-	{
-		pSupRate = &pAd->CommonCfg.SupRate[0];
-		pExtRate = &pAd->CommonCfg.ExtRate[0];
-		SupRateLen = pAd->CommonCfg.SupRateLen;
-		ExtRateLen = pAd->CommonCfg.ExtRateLen;
-	}
-
-	// find max supported rate
-	for (i=0; i<SupRateLen; i++)
-	{
-		switch (pSupRate[i] & 0x7f)
-		{
-			case 2:   Rate = RATE_1;	if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0001;	 break;
-			case 4:   Rate = RATE_2;	if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0002;	 break;
-			case 11:  Rate = RATE_5_5;	if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0004;	 break;
-			case 22:  Rate = RATE_11;	if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0008;	 break;
-			case 12:  Rate = RATE_6;	/*if (pSupRate[i] & 0x80)*/  BasicRateBitmap |= 0x0010;  break;
-			case 18:  Rate = RATE_9;	if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0020;	 break;
-			case 24:  Rate = RATE_12;	/*if (pSupRate[i] & 0x80)*/  BasicRateBitmap |= 0x0040;  break;
-			case 36:  Rate = RATE_18;	if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0080;	 break;
-			case 48:  Rate = RATE_24;	/*if (pSupRate[i] & 0x80)*/  BasicRateBitmap |= 0x0100;  break;
-			case 72:  Rate = RATE_36;	if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0200;	 break;
-			case 96:  Rate = RATE_48;	if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0400;	 break;
-			case 108: Rate = RATE_54;	if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0800;	 break;
-			default:  Rate = RATE_1;	break;
-		}
-		if (MaxSupport < Rate)	MaxSupport = Rate;
-
-		if (MinSupport > Rate) MinSupport = Rate;
-	}
-
-	for (i=0; i<ExtRateLen; i++)
-	{
-		switch (pExtRate[i] & 0x7f)
-		{
-			case 2:   Rate = RATE_1;	if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0001;	 break;
-			case 4:   Rate = RATE_2;	if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0002;	 break;
-			case 11:  Rate = RATE_5_5;	if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0004;	 break;
-			case 22:  Rate = RATE_11;	if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0008;	 break;
-			case 12:  Rate = RATE_6;	/*if (pExtRate[i] & 0x80)*/  BasicRateBitmap |= 0x0010;  break;
-			case 18:  Rate = RATE_9;	if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0020;	 break;
-			case 24:  Rate = RATE_12;	/*if (pExtRate[i] & 0x80)*/  BasicRateBitmap |= 0x0040;  break;
-			case 36:  Rate = RATE_18;	if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0080;	 break;
-			case 48:  Rate = RATE_24;	/*if (pExtRate[i] & 0x80)*/  BasicRateBitmap |= 0x0100;  break;
-			case 72:  Rate = RATE_36;	if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0200;	 break;
-			case 96:  Rate = RATE_48;	if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0400;	 break;
-			case 108: Rate = RATE_54;	if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0800;	 break;
-			default:  Rate = RATE_1;	break;
-		}
-		if (MaxSupport < Rate)	MaxSupport = Rate;
-
-		if (MinSupport > Rate) MinSupport = Rate;
-	}
-
-	RTMP_IO_WRITE32(pAd, LEGACY_BASIC_RATE, BasicRateBitmap);
-
-	// calculate the exptected ACK rate for each TX rate. This info is used to caculate
-	// the DURATION field of outgoing uniicast DATA/MGMT frame
-	for (i=0; i<MAX_LEN_OF_SUPPORTED_RATES; i++)
-	{
-		if (BasicRateBitmap & (0x01 << i))
-			CurrBasicRate = (UCHAR)i;
-		pAd->CommonCfg.ExpectedACKRate[i] = CurrBasicRate;
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE,("MlmeUpdateTxRates[MaxSupport = %d] = MaxDesire %d Mbps\n", RateIdToMbps[MaxSupport], RateIdToMbps[MaxDesire]));
-	// max tx rate = min {max desire rate, max supported rate}
-	if (MaxSupport < MaxDesire)
-		pAd->CommonCfg.MaxTxRate = MaxSupport;
-	else
-		pAd->CommonCfg.MaxTxRate = MaxDesire;
-
-	pAd->CommonCfg.MinTxRate = MinSupport;
-	// 2003-07-31 john - 2500 doesn't have good sensitivity at high OFDM rates. to increase the success
-	// ratio of initial DHCP packet exchange, TX rate starts from a lower rate depending
-	// on average RSSI
-	//	 1. RSSI >= -70db, start at 54 Mbps (short distance)
-	//	 2. -70 > RSSI >= -75, start at 24 Mbps (mid distance)
-	//	 3. -75 > RSSI, start at 11 Mbps (long distance)
-	//if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED)/* &&
-	//	OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)*/)
-	if (*auto_rate_cur_p)
-	{
-		short dbm = 0;
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			dbm = pAd->StaCfg.RssiSample.AvgRssi0 - pAd->BbpRssiToDbmDelta;
-#endif // CONFIG_STA_SUPPORT //
-		if (bLinkUp == TRUE)
-			pAd->CommonCfg.TxRate = RATE_24;
-		else
-			pAd->CommonCfg.TxRate = pAd->CommonCfg.MaxTxRate;
-
-		if (dbm < -75)
-			pAd->CommonCfg.TxRate = RATE_11;
-		else if (dbm < -70)
-			pAd->CommonCfg.TxRate = RATE_24;
-
-		// should never exceed MaxTxRate (consider 11B-only mode)
-		if (pAd->CommonCfg.TxRate > pAd->CommonCfg.MaxTxRate)
-			pAd->CommonCfg.TxRate = pAd->CommonCfg.MaxTxRate;
-
-		pAd->CommonCfg.TxRateIndex = 0;
-	}
-	else
-	{
-		pAd->CommonCfg.TxRate = pAd->CommonCfg.MaxTxRate;
-		pHtPhy->field.MCS	= (pAd->CommonCfg.MaxTxRate > 3) ? (pAd->CommonCfg.MaxTxRate - 4) : pAd->CommonCfg.MaxTxRate;
-		pHtPhy->field.MODE	= (pAd->CommonCfg.MaxTxRate > 3) ? MODE_OFDM : MODE_CCK;
-
-		pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.STBC	= pHtPhy->field.STBC;
-		pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.ShortGI	= pHtPhy->field.ShortGI;
-		pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MCS		= pHtPhy->field.MCS;
-		pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE	= pHtPhy->field.MODE;
-	}
-
-	if (pAd->CommonCfg.TxRate <= RATE_11)
-	{
-		pMaxHtPhy->field.MODE = MODE_CCK;
-		pMaxHtPhy->field.MCS = pAd->CommonCfg.TxRate;
-		pMinHtPhy->field.MCS = pAd->CommonCfg.MinTxRate;
-	}
-	else
-	{
-		pMaxHtPhy->field.MODE = MODE_OFDM;
-		pMaxHtPhy->field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.TxRate];
-		if (pAd->CommonCfg.MinTxRate >= RATE_6 && (pAd->CommonCfg.MinTxRate <= RATE_54))
-			{pMinHtPhy->field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MinTxRate];}
-		else
-			{pMinHtPhy->field.MCS = pAd->CommonCfg.MinTxRate;}
-	}
-
-	pHtPhy->word = (pMaxHtPhy->word);
-	if (bLinkUp && (pAd->OpMode == OPMODE_STA))
-	{
-			pAd->MacTab.Content[BSSID_WCID].HTPhyMode.word = pHtPhy->word;
-			pAd->MacTab.Content[BSSID_WCID].MaxHTPhyMode.word = pMaxHtPhy->word;
-			pAd->MacTab.Content[BSSID_WCID].MinHTPhyMode.word = pMinHtPhy->word;
-	}
-	else
-	{
-		switch (pAd->CommonCfg.PhyMode)
-		{
-			case PHY_11BG_MIXED:
-			case PHY_11B:
-#ifdef DOT11_N_SUPPORT
-			case PHY_11BGN_MIXED:
-#endif // DOT11_N_SUPPORT //
-				pAd->CommonCfg.MlmeRate = RATE_1;
-				pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK;
-				pAd->CommonCfg.MlmeTransmit.field.MCS = RATE_1;
-
-//#ifdef	WIFI_TEST
-				pAd->CommonCfg.RtsRate = RATE_11;
-//#else
-//				pAd->CommonCfg.RtsRate = RATE_1;
-//#endif
-				break;
-			case PHY_11G:
-			case PHY_11A:
-#ifdef DOT11_N_SUPPORT
-			case PHY_11AGN_MIXED:
-			case PHY_11GN_MIXED:
-			case PHY_11N_2_4G:
-			case PHY_11AN_MIXED:
-			case PHY_11N_5G:
-#endif // DOT11_N_SUPPORT //
-				pAd->CommonCfg.MlmeRate = RATE_6;
-				pAd->CommonCfg.RtsRate = RATE_6;
-				pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM;
-				pAd->CommonCfg.MlmeTransmit.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate];
-				break;
-			case PHY_11ABG_MIXED:
-#ifdef DOT11_N_SUPPORT
-			case PHY_11ABGN_MIXED:
-#endif // DOT11_N_SUPPORT //
-				if (pAd->CommonCfg.Channel <= 14)
-				{
-					pAd->CommonCfg.MlmeRate = RATE_1;
-					pAd->CommonCfg.RtsRate = RATE_1;
-					pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK;
-					pAd->CommonCfg.MlmeTransmit.field.MCS = RATE_1;
-				}
-				else
-				{
-					pAd->CommonCfg.MlmeRate = RATE_6;
-					pAd->CommonCfg.RtsRate = RATE_6;
-					pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM;
-					pAd->CommonCfg.MlmeTransmit.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate];
-				}
-				break;
-			default: // error
-				pAd->CommonCfg.MlmeRate = RATE_6;
-                        	pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM;
-				pAd->CommonCfg.MlmeTransmit.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate];
-				pAd->CommonCfg.RtsRate = RATE_1;
-				break;
-		}
-		//
-		// Keep Basic Mlme Rate.
-		//
-		pAd->MacTab.Content[MCAST_WCID].HTPhyMode.word = pAd->CommonCfg.MlmeTransmit.word;
-		if (pAd->CommonCfg.MlmeTransmit.field.MODE == MODE_OFDM)
-			pAd->MacTab.Content[MCAST_WCID].HTPhyMode.field.MCS = OfdmRateToRxwiMCS[RATE_24];
-		else
-			pAd->MacTab.Content[MCAST_WCID].HTPhyMode.field.MCS = RATE_1;
-		pAd->CommonCfg.BasicMlmeRate = pAd->CommonCfg.MlmeRate;
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, (" MlmeUpdateTxRates (MaxDesire=%d, MaxSupport=%d, MaxTxRate=%d, MinRate=%d, Rate Switching =%d)\n",
-			 RateIdToMbps[MaxDesire], RateIdToMbps[MaxSupport], RateIdToMbps[pAd->CommonCfg.MaxTxRate], RateIdToMbps[pAd->CommonCfg.MinTxRate],
-			 /*OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED)*/*auto_rate_cur_p));
-	DBGPRINT(RT_DEBUG_TRACE, (" MlmeUpdateTxRates (TxRate=%d, RtsRate=%d, BasicRateBitmap=0x%04lx)\n",
-			 RateIdToMbps[pAd->CommonCfg.TxRate], RateIdToMbps[pAd->CommonCfg.RtsRate], BasicRateBitmap));
-	DBGPRINT(RT_DEBUG_TRACE, ("MlmeUpdateTxRates (MlmeTransmit=0x%x, MinHTPhyMode=%x, MaxHTPhyMode=0x%x, HTPhyMode=0x%x)\n",
-			 pAd->CommonCfg.MlmeTransmit.word, pAd->MacTab.Content[BSSID_WCID].MinHTPhyMode.word ,pAd->MacTab.Content[BSSID_WCID].MaxHTPhyMode.word ,pAd->MacTab.Content[BSSID_WCID].HTPhyMode.word ));
-}
-
-#ifdef DOT11_N_SUPPORT
-/*
-	==========================================================================
-	Description:
-		This function update HT Rate setting.
-		Input Wcid value is valid for 2 case :
-		1. it's used for Station in infra mode that copy AP rate to Mactable.
-		2. OR Station 	in adhoc mode to copy peer's HT rate to Mactable.
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID MlmeUpdateHtTxRates(
-	IN PRTMP_ADAPTER 		pAd,
-	IN	UCHAR				apidx)
-{
-	UCHAR	StbcMcs; //j, StbcMcs, bitmask;
-	CHAR 	i; // 3*3
-	RT_HT_CAPABILITY 	*pRtHtCap = NULL;
-	RT_HT_PHY_INFO		*pActiveHtPhy = NULL;
-	ULONG		BasicMCS;
-	UCHAR j, bitmask;
-	PRT_HT_PHY_INFO			pDesireHtPhy = NULL;
-	PHTTRANSMIT_SETTING		pHtPhy = NULL;
-	PHTTRANSMIT_SETTING		pMaxHtPhy = NULL;
-	PHTTRANSMIT_SETTING		pMinHtPhy = NULL;
-	BOOLEAN 				*auto_rate_cur_p;
-
-	DBGPRINT(RT_DEBUG_TRACE,("MlmeUpdateHtTxRates===> \n"));
-
-	auto_rate_cur_p = NULL;
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		pDesireHtPhy	= &pAd->StaCfg.DesiredHtPhyInfo;
-		pActiveHtPhy	= &pAd->StaCfg.DesiredHtPhyInfo;
-		pHtPhy 		= &pAd->StaCfg.HTPhyMode;
-		pMaxHtPhy	= &pAd->StaCfg.MaxHTPhyMode;
-		pMinHtPhy	= &pAd->StaCfg.MinHTPhyMode;
-
-		auto_rate_cur_p = &pAd->StaCfg.bAutoTxRateSwitch;
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef CONFIG_STA_SUPPORT
-	if ((ADHOC_ON(pAd) || INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA))
-	{
-		if (pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE)
-			return;
-
-		pRtHtCap = &pAd->StaActive.SupportedHtPhy;
-		pActiveHtPhy = &pAd->StaActive.SupportedPhyInfo;
-		StbcMcs = (UCHAR)pAd->MlmeAux.AddHtInfo.AddHtInfo3.StbcMcs;
-		BasicMCS =pAd->MlmeAux.AddHtInfo.MCSSet[0]+(pAd->MlmeAux.AddHtInfo.MCSSet[1]<<8)+(StbcMcs<<16);
-		if ((pAd->CommonCfg.DesiredHtPhy.TxSTBC) && (pRtHtCap->RxSTBC) && (pAd->Antenna.field.TxPath == 2))
-			pMaxHtPhy->field.STBC = STBC_USE;
-		else
-			pMaxHtPhy->field.STBC = STBC_NONE;
-	}
-	else
-#endif // CONFIG_STA_SUPPORT //
-	{
-		if (pDesireHtPhy->bHtEnable == FALSE)
-			return;
-
-		pRtHtCap = &pAd->CommonCfg.DesiredHtPhy;
-		StbcMcs = (UCHAR)pAd->CommonCfg.AddHTInfo.AddHtInfo3.StbcMcs;
-		BasicMCS = pAd->CommonCfg.AddHTInfo.MCSSet[0]+(pAd->CommonCfg.AddHTInfo.MCSSet[1]<<8)+(StbcMcs<<16);
-		if ((pAd->CommonCfg.DesiredHtPhy.TxSTBC) && (pRtHtCap->RxSTBC) && (pAd->Antenna.field.TxPath == 2))
-			pMaxHtPhy->field.STBC = STBC_USE;
-		else
-			pMaxHtPhy->field.STBC = STBC_NONE;
-	}
-
-	// Decide MAX ht rate.
-	if ((pRtHtCap->GF) && (pAd->CommonCfg.DesiredHtPhy.GF))
-		pMaxHtPhy->field.MODE = MODE_HTGREENFIELD;
-	else
-		pMaxHtPhy->field.MODE = MODE_HTMIX;
-
-    if ((pAd->CommonCfg.DesiredHtPhy.ChannelWidth) && (pRtHtCap->ChannelWidth))
-		pMaxHtPhy->field.BW = BW_40;
-	else
-		pMaxHtPhy->field.BW = BW_20;
-
-    if (pMaxHtPhy->field.BW == BW_20)
-		pMaxHtPhy->field.ShortGI = (pAd->CommonCfg.DesiredHtPhy.ShortGIfor20 & pRtHtCap->ShortGIfor20);
-	else
-		pMaxHtPhy->field.ShortGI = (pAd->CommonCfg.DesiredHtPhy.ShortGIfor40 & pRtHtCap->ShortGIfor40);
-
-	for (i=23; i>=0; i--) // 3*3
-	{
-		j = i/8;
-		bitmask = (1<<(i-(j*8)));
-
-		if ((pActiveHtPhy->MCSSet[j] & bitmask) && (pDesireHtPhy->MCSSet[j] & bitmask))
-		{
-			pMaxHtPhy->field.MCS = i;
-			break;
-		}
-
-		if (i==0)
-			break;
-	}
-
-	// Copy MIN ht rate.  rt2860???
-	pMinHtPhy->field.BW = BW_20;
-	pMinHtPhy->field.MCS = 0;
-	pMinHtPhy->field.STBC = 0;
-	pMinHtPhy->field.ShortGI = 0;
-	//If STA assigns fixed rate. update to fixed here.
-#ifdef CONFIG_STA_SUPPORT
-	if ( (pAd->OpMode == OPMODE_STA) && (pDesireHtPhy->MCSSet[0] != 0xff))
-	{
-		if (pDesireHtPhy->MCSSet[4] != 0)
-		{
-			pMaxHtPhy->field.MCS = 32;
-			pMinHtPhy->field.MCS = 32;
-			DBGPRINT(RT_DEBUG_TRACE,("MlmeUpdateHtTxRates<=== Use Fixed MCS = %d\n",pMinHtPhy->field.MCS));
-		}
-
-		for (i=23; (CHAR)i >= 0; i--) // 3*3
-		{
-			j = i/8;
-			bitmask = (1<<(i-(j*8)));
-			if ( (pDesireHtPhy->MCSSet[j] & bitmask) && (pActiveHtPhy->MCSSet[j] & bitmask))
-			{
-				pMaxHtPhy->field.MCS = i;
-				pMinHtPhy->field.MCS = i;
-				break;
-			}
-			if (i==0)
-				break;
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-
-	// Decide ht rate
-	pHtPhy->field.STBC = pMaxHtPhy->field.STBC;
-	pHtPhy->field.BW = pMaxHtPhy->field.BW;
-	pHtPhy->field.MODE = pMaxHtPhy->field.MODE;
-	pHtPhy->field.MCS = pMaxHtPhy->field.MCS;
-	pHtPhy->field.ShortGI = pMaxHtPhy->field.ShortGI;
-
-	// use default now. rt2860
-	if (pDesireHtPhy->MCSSet[0] != 0xff)
-		*auto_rate_cur_p = FALSE;
-	else
-		*auto_rate_cur_p = TRUE;
-
-	DBGPRINT(RT_DEBUG_TRACE, (" MlmeUpdateHtTxRates<---.AMsduSize = %d  \n", pAd->CommonCfg.DesiredHtPhy.AmsduSize ));
-	DBGPRINT(RT_DEBUG_TRACE,("TX: MCS[0] = %x (choose %d), BW = %d, ShortGI = %d, MODE = %d,  \n", pActiveHtPhy->MCSSet[0],pHtPhy->field.MCS,
-		pHtPhy->field.BW, pHtPhy->field.ShortGI, pHtPhy->field.MODE));
-	DBGPRINT(RT_DEBUG_TRACE,("MlmeUpdateHtTxRates<=== \n"));
-}
-#endif // DOT11_N_SUPPORT //
-
-// IRQL = DISPATCH_LEVEL
-VOID MlmeRadioOff(
-	IN PRTMP_ADAPTER pAd)
-{
-	RT28XX_MLME_RADIO_OFF(pAd);
-}
-
-// IRQL = DISPATCH_LEVEL
-VOID MlmeRadioOn(
-	IN PRTMP_ADAPTER pAd)
-{
-	RT28XX_MLME_RADIO_ON(pAd);
-}
-
-// ===========================================================================================
-// bss_table.c
-// ===========================================================================================
-
-
-/*! \brief initialize BSS table
- *	\param p_tab pointer to the table
- *	\return none
- *	\pre
- *	\post
-
- IRQL = PASSIVE_LEVEL
- IRQL = DISPATCH_LEVEL
-
- */
-VOID BssTableInit(
-	IN BSS_TABLE *Tab)
-{
-	int i;
-
-	Tab->BssNr = 0;
-    Tab->BssOverlapNr = 0;
-	for (i = 0; i < MAX_LEN_OF_BSS_TABLE; i++)
-	{
-		NdisZeroMemory(&Tab->BssEntry[i], sizeof(BSS_ENTRY));
-		Tab->BssEntry[i].Rssi = -127;	// initial the rssi as a minimum value
-	}
-}
-
-#ifdef DOT11_N_SUPPORT
-VOID BATableInit(
-	IN PRTMP_ADAPTER pAd,
-    IN BA_TABLE *Tab)
-{
-	int i;
-
-	Tab->numAsOriginator = 0;
-	Tab->numAsRecipient = 0;
-	NdisAllocateSpinLock(&pAd->BATabLock);
-	for (i = 0; i < MAX_LEN_OF_BA_REC_TABLE; i++)
-	{
-		Tab->BARecEntry[i].REC_BA_Status = Recipient_NONE;
-		NdisAllocateSpinLock(&(Tab->BARecEntry[i].RxReRingLock));
-	}
-	for (i = 0; i < MAX_LEN_OF_BA_ORI_TABLE; i++)
-	{
-		Tab->BAOriEntry[i].ORI_BA_Status = Originator_NONE;
-	}
-}
-#endif // DOT11_N_SUPPORT //
-
-/*! \brief search the BSS table by SSID
- *	\param p_tab pointer to the bss table
- *	\param ssid SSID string
- *	\return index of the table, BSS_NOT_FOUND if not in the table
- *	\pre
- *	\post
- *	\note search by sequential search
-
- IRQL = DISPATCH_LEVEL
-
- */
-ULONG BssTableSearch(
-	IN BSS_TABLE *Tab,
-	IN PUCHAR	 pBssid,
-	IN UCHAR	 Channel)
-{
-	UCHAR i;
-
-	for (i = 0; i < Tab->BssNr; i++)
-	{
-		//
-		// Some AP that support A/B/G mode that may used the same BSSID on 11A and 11B/G.
-		// We should distinguish this case.
-		//
-		if ((((Tab->BssEntry[i].Channel <= 14) && (Channel <= 14)) ||
-			 ((Tab->BssEntry[i].Channel > 14) && (Channel > 14))) &&
-			MAC_ADDR_EQUAL(Tab->BssEntry[i].Bssid, pBssid))
-		{
-			return i;
-		}
-	}
-	return (ULONG)BSS_NOT_FOUND;
-}
-
-ULONG BssSsidTableSearch(
-	IN BSS_TABLE *Tab,
-	IN PUCHAR	 pBssid,
-	IN PUCHAR	 pSsid,
-	IN UCHAR	 SsidLen,
-	IN UCHAR	 Channel)
-{
-	UCHAR i;
-
-	for (i = 0; i < Tab->BssNr; i++)
-	{
-		//
-		// Some AP that support A/B/G mode that may used the same BSSID on 11A and 11B/G.
-		// We should distinguish this case.
-		//
-		if ((((Tab->BssEntry[i].Channel <= 14) && (Channel <= 14)) ||
-			 ((Tab->BssEntry[i].Channel > 14) && (Channel > 14))) &&
-			MAC_ADDR_EQUAL(Tab->BssEntry[i].Bssid, pBssid) &&
-			SSID_EQUAL(pSsid, SsidLen, Tab->BssEntry[i].Ssid, Tab->BssEntry[i].SsidLen))
-		{
-			return i;
-		}
-	}
-	return (ULONG)BSS_NOT_FOUND;
-}
-
-ULONG BssTableSearchWithSSID(
-	IN BSS_TABLE *Tab,
-	IN PUCHAR	 Bssid,
-	IN PUCHAR	 pSsid,
-	IN UCHAR	 SsidLen,
-	IN UCHAR	 Channel)
-{
-	UCHAR i;
-
-	for (i = 0; i < Tab->BssNr; i++)
-	{
-		if ((((Tab->BssEntry[i].Channel <= 14) && (Channel <= 14)) ||
-			((Tab->BssEntry[i].Channel > 14) && (Channel > 14))) &&
-			MAC_ADDR_EQUAL(&(Tab->BssEntry[i].Bssid), Bssid) &&
-			(SSID_EQUAL(pSsid, SsidLen, Tab->BssEntry[i].Ssid, Tab->BssEntry[i].SsidLen) ||
-			(NdisEqualMemory(pSsid, ZeroSsid, SsidLen)) ||
-			(NdisEqualMemory(Tab->BssEntry[i].Ssid, ZeroSsid, Tab->BssEntry[i].SsidLen))))
-		{
-			return i;
-		}
-	}
-	return (ULONG)BSS_NOT_FOUND;
-}
-
-// IRQL = DISPATCH_LEVEL
-VOID BssTableDeleteEntry(
-	IN OUT	BSS_TABLE *Tab,
-	IN		PUCHAR	  pBssid,
-	IN		UCHAR	  Channel)
-{
-	UCHAR i, j;
-
-	for (i = 0; i < Tab->BssNr; i++)
-	{
-		if ((Tab->BssEntry[i].Channel == Channel) &&
-			(MAC_ADDR_EQUAL(Tab->BssEntry[i].Bssid, pBssid)))
-		{
-			for (j = i; j < Tab->BssNr - 1; j++)
-			{
-				NdisMoveMemory(&(Tab->BssEntry[j]), &(Tab->BssEntry[j + 1]), sizeof(BSS_ENTRY));
-			}
-			NdisZeroMemory(&(Tab->BssEntry[Tab->BssNr - 1]), sizeof(BSS_ENTRY));
-			Tab->BssNr -= 1;
-			return;
-		}
-	}
-}
-
-#ifdef DOT11_N_SUPPORT
-/*
-	========================================================================
-	Routine Description:
-		Delete the Originator Entry in BAtable. Or decrease numAs Originator by 1 if needed.
-
-	Arguments:
-	// IRQL = DISPATCH_LEVEL
-	========================================================================
-*/
-VOID BATableDeleteORIEntry(
-	IN OUT	PRTMP_ADAPTER pAd,
-	IN		BA_ORI_ENTRY	*pBAORIEntry)
-{
-
-	if (pBAORIEntry->ORI_BA_Status != Originator_NONE)
-	{
-		NdisAcquireSpinLock(&pAd->BATabLock);
-		if (pBAORIEntry->ORI_BA_Status == Originator_Done)
-		{
-			pAd->BATable.numAsOriginator -= 1;
-			DBGPRINT(RT_DEBUG_TRACE, ("BATableDeleteORIEntry numAsOriginator= %ld\n", pAd->BATable.numAsRecipient));
-			// Erase Bitmap flag.
-		}
-		pAd->MacTab.Content[pBAORIEntry->Wcid].TXBAbitmap &= (~(1<<(pBAORIEntry->TID) ));	// If STA mode,  erase flag here
-		pAd->MacTab.Content[pBAORIEntry->Wcid].BAOriWcidArray[pBAORIEntry->TID] = 0;	// If STA mode,  erase flag here
-		pBAORIEntry->ORI_BA_Status = Originator_NONE;
-		pBAORIEntry->Token = 1;
-		// Not clear Sequence here.
-		NdisReleaseSpinLock(&pAd->BATabLock);
-	}
-}
-#endif // DOT11_N_SUPPORT //
-
-/*! \brief
- *	\param
- *	\return
- *	\pre
- *	\post
-
- IRQL = DISPATCH_LEVEL
-
- */
-VOID BssEntrySet(
-	IN PRTMP_ADAPTER	pAd,
-	OUT BSS_ENTRY *pBss,
-	IN PUCHAR pBssid,
-	IN CHAR Ssid[],
-	IN UCHAR SsidLen,
-	IN UCHAR BssType,
-	IN USHORT BeaconPeriod,
-	IN PCF_PARM pCfParm,
-	IN USHORT AtimWin,
-	IN USHORT CapabilityInfo,
-	IN UCHAR SupRate[],
-	IN UCHAR SupRateLen,
-	IN UCHAR ExtRate[],
-	IN UCHAR ExtRateLen,
-	IN HT_CAPABILITY_IE *pHtCapability,
-	IN ADD_HT_INFO_IE *pAddHtInfo,	// AP might use this additional ht info IE
-	IN UCHAR			HtCapabilityLen,
-	IN UCHAR			AddHtInfoLen,
-	IN UCHAR			NewExtChanOffset,
-	IN UCHAR Channel,
-	IN CHAR Rssi,
-	IN LARGE_INTEGER TimeStamp,
-	IN UCHAR CkipFlag,
-	IN PEDCA_PARM pEdcaParm,
-	IN PQOS_CAPABILITY_PARM pQosCapability,
-	IN PQBSS_LOAD_PARM pQbssLoad,
-	IN USHORT LengthVIE,
-	IN PNDIS_802_11_VARIABLE_IEs pVIE)
-{
-	COPY_MAC_ADDR(pBss->Bssid, pBssid);
-	// Default Hidden SSID to be TRUE, it will be turned to FALSE after coping SSID
-	pBss->Hidden = 1;
-	if (SsidLen > 0)
-	{
-		// For hidden SSID AP, it might send beacon with SSID len equal to 0
-		// Or send beacon /probe response with SSID len matching real SSID length,
-		// but SSID is all zero. such as "00-00-00-00" with length 4.
-		// We have to prevent this case overwrite correct table
-		if (NdisEqualMemory(Ssid, ZeroSsid, SsidLen) == 0)
-		{
-		    NdisZeroMemory(pBss->Ssid, MAX_LEN_OF_SSID);
-			NdisMoveMemory(pBss->Ssid, Ssid, SsidLen);
-			pBss->SsidLen = SsidLen;
-			pBss->Hidden = 0;
-		}
-	}
-	else
-		pBss->SsidLen = 0;
-	pBss->BssType = BssType;
-	pBss->BeaconPeriod = BeaconPeriod;
-	if (BssType == BSS_INFRA)
-	{
-		if (pCfParm->bValid)
-		{
-			pBss->CfpCount = pCfParm->CfpCount;
-			pBss->CfpPeriod = pCfParm->CfpPeriod;
-			pBss->CfpMaxDuration = pCfParm->CfpMaxDuration;
-			pBss->CfpDurRemaining = pCfParm->CfpDurRemaining;
-		}
-	}
-	else
-	{
-		pBss->AtimWin = AtimWin;
-	}
-
-	pBss->CapabilityInfo = CapabilityInfo;
-	// The privacy bit indicate security is ON, it maight be WEP, TKIP or AES
-	// Combine with AuthMode, they will decide the connection methods.
-	pBss->Privacy = CAP_IS_PRIVACY_ON(pBss->CapabilityInfo);
-	ASSERT(SupRateLen <= MAX_LEN_OF_SUPPORTED_RATES);
-	if (SupRateLen <= MAX_LEN_OF_SUPPORTED_RATES)
-		NdisMoveMemory(pBss->SupRate, SupRate, SupRateLen);
-	else
-		NdisMoveMemory(pBss->SupRate, SupRate, MAX_LEN_OF_SUPPORTED_RATES);
-	pBss->SupRateLen = SupRateLen;
-	ASSERT(ExtRateLen <= MAX_LEN_OF_SUPPORTED_RATES);
-	NdisMoveMemory(pBss->ExtRate, ExtRate, ExtRateLen);
-	NdisMoveMemory(&pBss->HtCapability, pHtCapability, HtCapabilityLen);
-	NdisMoveMemory(&pBss->AddHtInfo, pAddHtInfo, AddHtInfoLen);
-	pBss->NewExtChanOffset = NewExtChanOffset;
-	pBss->ExtRateLen = ExtRateLen;
-	pBss->Channel = Channel;
-	pBss->CentralChannel = Channel;
-	pBss->Rssi = Rssi;
-	// Update CkipFlag. if not exists, the value is 0x0
-	pBss->CkipFlag = CkipFlag;
-
-	// New for microsoft Fixed IEs
-	NdisMoveMemory(pBss->FixIEs.Timestamp, &TimeStamp, 8);
-	pBss->FixIEs.BeaconInterval = BeaconPeriod;
-	pBss->FixIEs.Capabilities = CapabilityInfo;
-
-	// New for microsoft Variable IEs
-	if (LengthVIE != 0)
-	{
-		pBss->VarIELen = LengthVIE;
-		NdisMoveMemory(pBss->VarIEs, pVIE, pBss->VarIELen);
-	}
-	else
-	{
-		pBss->VarIELen = 0;
-	}
-
-	pBss->AddHtInfoLen = 0;
-	pBss->HtCapabilityLen = 0;
-#ifdef DOT11_N_SUPPORT
-	if (HtCapabilityLen> 0)
-	{
-		pBss->HtCapabilityLen = HtCapabilityLen;
-		NdisMoveMemory(&pBss->HtCapability, pHtCapability, HtCapabilityLen);
-		if (AddHtInfoLen > 0)
-		{
-			pBss->AddHtInfoLen = AddHtInfoLen;
-			NdisMoveMemory(&pBss->AddHtInfo, pAddHtInfo, AddHtInfoLen);
-
-	 			if ((pAddHtInfo->ControlChan > 2)&& (pAddHtInfo->AddHtInfo.ExtChanOffset == EXTCHA_BELOW) && (pHtCapability->HtCapInfo.ChannelWidth == BW_40))
-	 			{
-	 				pBss->CentralChannel = pAddHtInfo->ControlChan - 2;
-	 			}
-	 			else if ((pAddHtInfo->AddHtInfo.ExtChanOffset == EXTCHA_ABOVE) && (pHtCapability->HtCapInfo.ChannelWidth == BW_40))
-				{
-		 				pBss->CentralChannel = pAddHtInfo->ControlChan + 2;
-				}
-		}
-	}
-#endif // DOT11_N_SUPPORT //
-
-	BssCipherParse(pBss);
-
-	// new for QOS
-	if (pEdcaParm)
-		NdisMoveMemory(&pBss->EdcaParm, pEdcaParm, sizeof(EDCA_PARM));
-	else
-		pBss->EdcaParm.bValid = FALSE;
-	if (pQosCapability)
-		NdisMoveMemory(&pBss->QosCapability, pQosCapability, sizeof(QOS_CAPABILITY_PARM));
-	else
-		pBss->QosCapability.bValid = FALSE;
-	if (pQbssLoad)
-		NdisMoveMemory(&pBss->QbssLoad, pQbssLoad, sizeof(QBSS_LOAD_PARM));
-	else
-		pBss->QbssLoad.bValid = FALSE;
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		PEID_STRUCT     pEid;
-		USHORT          Length = 0;
-
-
-		NdisZeroMemory(&pBss->WpaIE.IE[0], MAX_CUSTOM_LEN);
-		NdisZeroMemory(&pBss->RsnIE.IE[0], MAX_CUSTOM_LEN);
-#ifdef EXT_BUILD_CHANNEL_LIST
-		NdisZeroMemory(&pBss->CountryString[0], 3);
-		pBss->bHasCountryIE = FALSE;
-#endif // EXT_BUILD_CHANNEL_LIST //
-		pEid = (PEID_STRUCT) pVIE;
-		while ((Length + 2 + (USHORT)pEid->Len) <= LengthVIE)
-		{
-			switch(pEid->Eid)
-			{
-				case IE_WPA:
-					if (NdisEqualMemory(pEid->Octet, WPA_OUI, 4))
-					{
-						if ((pEid->Len + 2) > MAX_CUSTOM_LEN)
-						{
-							pBss->WpaIE.IELen = 0;
-							break;
-						}
-						pBss->WpaIE.IELen = pEid->Len + 2;
-						NdisMoveMemory(pBss->WpaIE.IE, pEid, pBss->WpaIE.IELen);
-					}
-					break;
-                case IE_RSN:
-                    if (NdisEqualMemory(pEid->Octet + 2, RSN_OUI, 3))
-					{
-						if ((pEid->Len + 2) > MAX_CUSTOM_LEN)
-						{
-							pBss->RsnIE.IELen = 0;
-							break;
-						}
-						pBss->RsnIE.IELen = pEid->Len + 2;
-						NdisMoveMemory(pBss->RsnIE.IE, pEid, pBss->RsnIE.IELen);
-			}
-				break;
-#ifdef EXT_BUILD_CHANNEL_LIST
-				case IE_COUNTRY:
-					NdisMoveMemory(&pBss->CountryString[0], pEid->Octet, 3);
-					pBss->bHasCountryIE = TRUE;
-					break;
-#endif // EXT_BUILD_CHANNEL_LIST //
-            }
-			Length = Length + 2 + (USHORT)pEid->Len;  // Eid[1] + Len[1]+ content[Len]
-			pEid = (PEID_STRUCT)((UCHAR*)pEid + 2 + pEid->Len);
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-}
-
-/*!
- *	\brief insert an entry into the bss table
- *	\param p_tab The BSS table
- *	\param Bssid BSSID
- *	\param ssid SSID
- *	\param ssid_len Length of SSID
- *	\param bss_type
- *	\param beacon_period
- *	\param timestamp
- *	\param p_cf
- *	\param atim_win
- *	\param cap
- *	\param rates
- *	\param rates_len
- *	\param channel_idx
- *	\return none
- *	\pre
- *	\post
- *	\note If SSID is identical, the old entry will be replaced by the new one
-
- IRQL = DISPATCH_LEVEL
-
- */
-ULONG BssTableSetEntry(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT BSS_TABLE *Tab,
-	IN PUCHAR pBssid,
-	IN CHAR Ssid[],
-	IN UCHAR SsidLen,
-	IN UCHAR BssType,
-	IN USHORT BeaconPeriod,
-	IN CF_PARM *CfParm,
-	IN USHORT AtimWin,
-	IN USHORT CapabilityInfo,
-	IN UCHAR SupRate[],
-	IN UCHAR SupRateLen,
-	IN UCHAR ExtRate[],
-	IN UCHAR ExtRateLen,
-	IN HT_CAPABILITY_IE *pHtCapability,
-	IN ADD_HT_INFO_IE *pAddHtInfo,	// AP might use this additional ht info IE
-	IN UCHAR			HtCapabilityLen,
-	IN UCHAR			AddHtInfoLen,
-	IN UCHAR			NewExtChanOffset,
-	IN UCHAR ChannelNo,
-	IN CHAR Rssi,
-	IN LARGE_INTEGER TimeStamp,
-	IN UCHAR CkipFlag,
-	IN PEDCA_PARM pEdcaParm,
-	IN PQOS_CAPABILITY_PARM pQosCapability,
-	IN PQBSS_LOAD_PARM pQbssLoad,
-	IN USHORT LengthVIE,
-	IN PNDIS_802_11_VARIABLE_IEs pVIE)
-{
-	ULONG	Idx;
-
-	Idx = BssTableSearchWithSSID(Tab, pBssid,  Ssid, SsidLen, ChannelNo);
-	if (Idx == BSS_NOT_FOUND)
-	{
-		if (Tab->BssNr >= MAX_LEN_OF_BSS_TABLE)
-	    {
-			//
-			// It may happen when BSS Table was full.
-			// The desired AP will not be added into BSS Table
-			// In this case, if we found the desired AP then overwrite BSS Table.
-			//
-			if(!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
-			{
-				if (MAC_ADDR_EQUAL(pAd->MlmeAux.Bssid, pBssid) ||
-					SSID_EQUAL(pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen, Ssid, SsidLen))
-				{
-					Idx = Tab->BssOverlapNr;
-					BssEntrySet(pAd, &Tab->BssEntry[Idx], pBssid, Ssid, SsidLen, BssType, BeaconPeriod, CfParm, AtimWin,
-						CapabilityInfo, SupRate, SupRateLen, ExtRate, ExtRateLen,pHtCapability, pAddHtInfo,HtCapabilityLen, AddHtInfoLen,
-						NewExtChanOffset, ChannelNo, Rssi, TimeStamp, CkipFlag, pEdcaParm, pQosCapability, pQbssLoad, LengthVIE, pVIE);
-                    Tab->BssOverlapNr = (Tab->BssOverlapNr++) % MAX_LEN_OF_BSS_TABLE;
-				}
-				return Idx;
-			}
-			else
-			{
-			return BSS_NOT_FOUND;
-			}
-		}
-		Idx = Tab->BssNr;
-		BssEntrySet(pAd, &Tab->BssEntry[Idx], pBssid, Ssid, SsidLen, BssType, BeaconPeriod, CfParm, AtimWin,
-					CapabilityInfo, SupRate, SupRateLen, ExtRate, ExtRateLen,pHtCapability, pAddHtInfo,HtCapabilityLen, AddHtInfoLen,
-					NewExtChanOffset, ChannelNo, Rssi, TimeStamp, CkipFlag, pEdcaParm, pQosCapability, pQbssLoad, LengthVIE, pVIE);
-		Tab->BssNr++;
-	}
-	else
-	{
-		/* avoid  Hidden SSID form beacon to overwirite correct SSID from probe response */
-		if ((SSID_EQUAL(Ssid, SsidLen, Tab->BssEntry[Idx].Ssid, Tab->BssEntry[Idx].SsidLen)) ||
-			(NdisEqualMemory(Tab->BssEntry[Idx].Ssid, ZeroSsid, Tab->BssEntry[Idx].SsidLen)))
-		{
-			BssEntrySet(pAd, &Tab->BssEntry[Idx], pBssid, Ssid, SsidLen, BssType, BeaconPeriod,CfParm, AtimWin,
-						CapabilityInfo, SupRate, SupRateLen, ExtRate, ExtRateLen,pHtCapability, pAddHtInfo,HtCapabilityLen, AddHtInfoLen,
-						NewExtChanOffset, ChannelNo, Rssi, TimeStamp, CkipFlag, pEdcaParm, pQosCapability, pQbssLoad, LengthVIE, pVIE);
-		}
-	}
-
-	return Idx;
-}
-
-#ifdef CONFIG_STA_SUPPORT
-#ifdef DOT11_N_SUPPORT
-#ifdef DOT11N_DRAFT3
-VOID  TriEventInit(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	UCHAR		i;
-
-	for (i = 0;i < MAX_TRIGGER_EVENT;i++)
-		pAd->CommonCfg.TriggerEventTab.EventA[i].bValid = FALSE;
-
-	pAd->CommonCfg.TriggerEventTab.EventANo = 0;
-	pAd->CommonCfg.TriggerEventTab.EventBCountDown = 0;
-}
-
-ULONG TriEventTableSetEntry(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT TRIGGER_EVENT_TAB *Tab,
-	IN PUCHAR pBssid,
-	IN HT_CAPABILITY_IE *pHtCapability,
-	IN UCHAR			HtCapabilityLen,
-	IN UCHAR			RegClass,
-	IN UCHAR ChannelNo)
-{
-	// Event A
-	if (HtCapabilityLen == 0)
-	{
-		if (Tab->EventANo < MAX_TRIGGER_EVENT)
-		{
-			RTMPMoveMemory(Tab->EventA[Tab->EventANo].BSSID, pBssid, 6);
-			Tab->EventA[Tab->EventANo].bValid = TRUE;
-			Tab->EventA[Tab->EventANo].Channel = ChannelNo;
-			Tab->EventA[Tab->EventANo].CDCounter = pAd->CommonCfg.Dot11BssWidthChanTranDelay;
-			if (RegClass != 0)
-			{
-				// Beacon has Regulatory class IE. So use beacon's
-				Tab->EventA[Tab->EventANo].RegClass = RegClass;
-			}
-			else
-			{
-				// Use Station's Regulatory class instead.
-				if (pAd->StaActive.SupportedHtPhy.bHtEnable == TRUE)
-				{
-					if (pAd->CommonCfg.CentralChannel > pAd->CommonCfg.Channel)
-					{
-						Tab->EventA[Tab->EventANo].RegClass = 32;
-					}
-					else if (pAd->CommonCfg.CentralChannel < pAd->CommonCfg.Channel)
-						Tab->EventA[Tab->EventANo].RegClass = 33;
-				}
-				else
-					Tab->EventA[Tab->EventANo].RegClass = ??;
-
-			}
-
-			Tab->EventANo ++;
-		}
-	}
-	else if (pHtCapability->HtCapInfo.Intolerant40)
-	{
-		Tab->EventBCountDown = pAd->CommonCfg.Dot11BssWidthChanTranDelay;
-	}
-
-}
-
-/*
-	========================================================================
-	Routine Description:
-		Trigger Event table Maintainence called once every second.
-
-	Arguments:
-	// IRQL = DISPATCH_LEVEL
-	========================================================================
-*/
-VOID TriEventCounterMaintenance(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	UCHAR		i;
-	BOOLEAN			bNotify = FALSE;
-	for (i = 0;i < MAX_TRIGGER_EVENT;i++)
-	{
-		if (pAd->CommonCfg.TriggerEventTab.EventA[i].bValid && (pAd->CommonCfg.TriggerEventTab.EventA[i].CDCounter > 0))
-		{
-			pAd->CommonCfg.TriggerEventTab.EventA[i].CDCounter--;
-			if (pAd->CommonCfg.TriggerEventTab.EventA[i].CDCounter == 0)
-			{
-				pAd->CommonCfg.TriggerEventTab.EventA[i].bValid = FALSE;
-				pAd->CommonCfg.TriggerEventTab.EventANo --;
-				// Need to send 20/40 Coexistence Notify frame if has status change.
-				bNotify = TRUE;
-			}
-		}
-	}
-	if (pAd->CommonCfg.TriggerEventTab.EventBCountDown > 0)
-	{
-		pAd->CommonCfg.TriggerEventTab.EventBCountDown--;
-		if (pAd->CommonCfg.TriggerEventTab.EventBCountDown == 0)
-			bNotify = TRUE;
-	}
-
-	if (bNotify == TRUE)
-		Update2040CoexistFrameAndNotify(pAd, BSSID_WCID, TRUE);
-}
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
-
-// IRQL = DISPATCH_LEVEL
-VOID BssTableSsidSort(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT BSS_TABLE *OutTab,
-	IN	CHAR Ssid[],
-	IN	UCHAR SsidLen)
-{
-	INT i;
-	BssTableInit(OutTab);
-
-	for (i = 0; i < pAd->ScanTab.BssNr; i++)
-	{
-		BSS_ENTRY *pInBss = &pAd->ScanTab.BssEntry[i];
-		BOOLEAN	bIsHiddenApIncluded = FALSE;
-
-		if (((pAd->CommonCfg.bIEEE80211H == 1) &&
-            (pAd->MlmeAux.Channel > 14) &&
-             RadarChannelCheck(pAd, pInBss->Channel))
-#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier
-             || (pAd->CommonCfg.CarrierDetect.Enable == TRUE)
-#endif // CARRIER_DETECTION_SUPPORT //
-            )
-		{
-			if (pInBss->Hidden)
-				bIsHiddenApIncluded = TRUE;
-		}
-
-		if ((pInBss->BssType == pAd->StaCfg.BssType) &&
-			(SSID_EQUAL(Ssid, SsidLen, pInBss->Ssid, pInBss->SsidLen) || bIsHiddenApIncluded))
-		{
-			BSS_ENTRY *pOutBss = &OutTab->BssEntry[OutTab->BssNr];
-
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-			// If no Country IE exists no Connection will be established when IEEE80211dClientMode is strict.
-			if ((pAd->StaCfg.IEEE80211dClientMode == Rt802_11_D_Strict) &&
-				(pInBss->bHasCountryIE == FALSE))
-			{
-				DBGPRINT(RT_DEBUG_TRACE,("StaCfg.IEEE80211dClientMode == Rt802_11_D_Strict, but this AP doesn't have country IE.\n"));
-				continue;
-			}
-#endif // EXT_BUILD_CHANNEL_LIST //
-
-#ifdef DOT11_N_SUPPORT
-			// 2.4G/5G N only mode
-			if ((pInBss->HtCapabilityLen == 0) &&
-				((pAd->CommonCfg.PhyMode == PHY_11N_2_4G) || (pAd->CommonCfg.PhyMode == PHY_11N_5G)))
-			{
-				DBGPRINT(RT_DEBUG_TRACE,("STA is in N-only Mode, this AP don't have Ht capability in Beacon.\n"));
-				continue;
-			}
-#endif // DOT11_N_SUPPORT //
-
-			// New for WPA2
-			// Check the Authmode first
-			if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-			{
-				// Check AuthMode and AuthModeAux for matching, in case AP support dual-mode
-				if ((pAd->StaCfg.AuthMode != pInBss->AuthMode) && (pAd->StaCfg.AuthMode != pInBss->AuthModeAux))
-					// None matched
-					continue;
-
-				// Check cipher suite, AP must have more secured cipher than station setting
-				if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK))
-				{
-					// If it's not mixed mode, we should only let BSS pass with the same encryption
-					if (pInBss->WPA.bMixMode == FALSE)
-						if (pAd->StaCfg.WepStatus != pInBss->WPA.GroupCipher)
-							continue;
-
-					// check group cipher
-					if (pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher)
-						continue;
-
-					// check pairwise cipher, skip if none matched
-					// If profile set to AES, let it pass without question.
-					// If profile set to TKIP, we must find one mateched
-					if ((pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled) &&
-						(pAd->StaCfg.WepStatus != pInBss->WPA.PairCipher) &&
-						(pAd->StaCfg.WepStatus != pInBss->WPA.PairCipherAux))
-						continue;
-				}
-				else if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK))
-				{
-					// If it's not mixed mode, we should only let BSS pass with the same encryption
-					if (pInBss->WPA2.bMixMode == FALSE)
-						if (pAd->StaCfg.WepStatus != pInBss->WPA2.GroupCipher)
-							continue;
-
-					// check group cipher
-					if (pAd->StaCfg.WepStatus < pInBss->WPA2.GroupCipher)
-						continue;
-
-					// check pairwise cipher, skip if none matched
-					// If profile set to AES, let it pass without question.
-					// If profile set to TKIP, we must find one mateched
-					if ((pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled) &&
-						(pAd->StaCfg.WepStatus != pInBss->WPA2.PairCipher) &&
-						(pAd->StaCfg.WepStatus != pInBss->WPA2.PairCipherAux))
-						continue;
-				}
-			}
-			// Bss Type matched, SSID matched.
-			// We will check wepstatus for qualification Bss
-			else if (pAd->StaCfg.WepStatus != pInBss->WepStatus)
-			{
-				DBGPRINT(RT_DEBUG_TRACE,("StaCfg.WepStatus=%d, while pInBss->WepStatus=%d\n", pAd->StaCfg.WepStatus, pInBss->WepStatus));
-				//
-				// For the SESv2 case, we will not qualify WepStatus.
-				//
-				if (!pInBss->bSES)
-					continue;
-			}
-
-			// Since the AP is using hidden SSID, and we are trying to connect to ANY
-			// It definitely will fail. So, skip it.
-			// CCX also require not even try to connect it!!
-			if (SsidLen == 0)
-				continue;
-
-#ifdef DOT11_N_SUPPORT
-			// If both station and AP use 40MHz, still need to check if the 40MHZ band's legality in my country region
-			// If this 40MHz wideband is not allowed in my country list, use bandwidth 20MHZ instead,
-			if ((pInBss->CentralChannel != pInBss->Channel) &&
-				(pAd->CommonCfg.RegTransmitSetting.field.BW == BW_40))
-			{
-				if (RTMPCheckChannel(pAd, pInBss->CentralChannel, pInBss->Channel) == FALSE)
-				{
-					pAd->CommonCfg.RegTransmitSetting.field.BW = BW_20;
-					SetCommonHT(pAd);
-					pAd->CommonCfg.RegTransmitSetting.field.BW = BW_40;
-				}
-				else
-				{
-					if (pAd->CommonCfg.DesiredHtPhy.ChannelWidth == BAND_WIDTH_20)
-					{
-						SetCommonHT(pAd);
-					}
-				}
-			}
-#endif // DOT11_N_SUPPORT //
-
-			// copy matching BSS from InTab to OutTab
-			NdisMoveMemory(pOutBss, pInBss, sizeof(BSS_ENTRY));
-
-			OutTab->BssNr++;
-		}
-		else if ((pInBss->BssType == pAd->StaCfg.BssType) && (SsidLen == 0))
-		{
-			BSS_ENTRY *pOutBss = &OutTab->BssEntry[OutTab->BssNr];
-
-
-#ifdef DOT11_N_SUPPORT
-			// 2.4G/5G N only mode
-			if ((pInBss->HtCapabilityLen == 0) &&
-				((pAd->CommonCfg.PhyMode == PHY_11N_2_4G) || (pAd->CommonCfg.PhyMode == PHY_11N_5G)))
-			{
-				DBGPRINT(RT_DEBUG_TRACE,("STA is in N-only Mode, this AP don't have Ht capability in Beacon.\n"));
-				continue;
-			}
-#endif // DOT11_N_SUPPORT //
-
-			// New for WPA2
-			// Check the Authmode first
-			if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-			{
-				// Check AuthMode and AuthModeAux for matching, in case AP support dual-mode
-				if ((pAd->StaCfg.AuthMode != pInBss->AuthMode) && (pAd->StaCfg.AuthMode != pInBss->AuthModeAux))
-					// None matched
-					continue;
-
-				// Check cipher suite, AP must have more secured cipher than station setting
-				if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK))
-				{
-					// If it's not mixed mode, we should only let BSS pass with the same encryption
-					if (pInBss->WPA.bMixMode == FALSE)
-						if (pAd->StaCfg.WepStatus != pInBss->WPA.GroupCipher)
-							continue;
-
-					// check group cipher
-					if (pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher)
-						continue;
-
-					// check pairwise cipher, skip if none matched
-					// If profile set to AES, let it pass without question.
-					// If profile set to TKIP, we must find one mateched
-					if ((pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled) &&
-						(pAd->StaCfg.WepStatus != pInBss->WPA.PairCipher) &&
-						(pAd->StaCfg.WepStatus != pInBss->WPA.PairCipherAux))
-						continue;
-				}
-				else if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK))
-				{
-					// If it's not mixed mode, we should only let BSS pass with the same encryption
-					if (pInBss->WPA2.bMixMode == FALSE)
-						if (pAd->StaCfg.WepStatus != pInBss->WPA2.GroupCipher)
-							continue;
-
-					// check group cipher
-					if (pAd->StaCfg.WepStatus < pInBss->WPA2.GroupCipher)
-						continue;
-
-					// check pairwise cipher, skip if none matched
-					// If profile set to AES, let it pass without question.
-					// If profile set to TKIP, we must find one mateched
-					if ((pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled) &&
-						(pAd->StaCfg.WepStatus != pInBss->WPA2.PairCipher) &&
-						(pAd->StaCfg.WepStatus != pInBss->WPA2.PairCipherAux))
-						continue;
-				}
-			}
-			// Bss Type matched, SSID matched.
-			// We will check wepstatus for qualification Bss
-			else if (pAd->StaCfg.WepStatus != pInBss->WepStatus)
-					continue;
-
-#ifdef DOT11_N_SUPPORT
-			// If both station and AP use 40MHz, still need to check if the 40MHZ band's legality in my country region
-			// If this 40MHz wideband is not allowed in my country list, use bandwidth 20MHZ instead,
-			if ((pInBss->CentralChannel != pInBss->Channel) &&
-				(pAd->CommonCfg.RegTransmitSetting.field.BW == BW_40))
-			{
-				if (RTMPCheckChannel(pAd, pInBss->CentralChannel, pInBss->Channel) == FALSE)
-				{
-					pAd->CommonCfg.RegTransmitSetting.field.BW = BW_20;
-					SetCommonHT(pAd);
-					pAd->CommonCfg.RegTransmitSetting.field.BW = BW_40;
-				}
-			}
-#endif // DOT11_N_SUPPORT //
-
-			// copy matching BSS from InTab to OutTab
-			NdisMoveMemory(pOutBss, pInBss, sizeof(BSS_ENTRY));
-
-			OutTab->BssNr++;
-		}
-
-		if (OutTab->BssNr >= MAX_LEN_OF_BSS_TABLE)
-			break;
-	}
-
-	BssTableSortByRssi(OutTab);
-}
-
-
-// IRQL = DISPATCH_LEVEL
-VOID BssTableSortByRssi(
-	IN OUT BSS_TABLE *OutTab)
-{
-	INT 	  i, j;
-	BSS_ENTRY TmpBss;
-
-	for (i = 0; i < OutTab->BssNr - 1; i++)
-	{
-		for (j = i+1; j < OutTab->BssNr; j++)
-		{
-			if (OutTab->BssEntry[j].Rssi > OutTab->BssEntry[i].Rssi)
-			{
-				NdisMoveMemory(&TmpBss, &OutTab->BssEntry[j], sizeof(BSS_ENTRY));
-				NdisMoveMemory(&OutTab->BssEntry[j], &OutTab->BssEntry[i], sizeof(BSS_ENTRY));
-				NdisMoveMemory(&OutTab->BssEntry[i], &TmpBss, sizeof(BSS_ENTRY));
-			}
-		}
-	}
-}
-#endif // CONFIG_STA_SUPPORT //
-
-
-VOID BssCipherParse(
-	IN OUT	PBSS_ENTRY	pBss)
-{
-	PEID_STRUCT 		 pEid;
-	PUCHAR				pTmp;
-	PRSN_IE_HEADER_STRUCT			pRsnHeader;
-	PCIPHER_SUITE_STRUCT			pCipher;
-	PAKM_SUITE_STRUCT				pAKM;
-	USHORT							Count;
-	INT								Length;
-	NDIS_802_11_ENCRYPTION_STATUS	TmpCipher;
-
-	//
-	// WepStatus will be reset later, if AP announce TKIP or AES on the beacon frame.
-	//
-	if (pBss->Privacy)
-	{
-		pBss->WepStatus 	= Ndis802_11WEPEnabled;
-	}
-	else
-	{
-		pBss->WepStatus 	= Ndis802_11WEPDisabled;
-	}
-	// Set default to disable & open authentication before parsing variable IE
-	pBss->AuthMode		= Ndis802_11AuthModeOpen;
-	pBss->AuthModeAux	= Ndis802_11AuthModeOpen;
-
-	// Init WPA setting
-	pBss->WPA.PairCipher	= Ndis802_11WEPDisabled;
-	pBss->WPA.PairCipherAux = Ndis802_11WEPDisabled;
-	pBss->WPA.GroupCipher	= Ndis802_11WEPDisabled;
-	pBss->WPA.RsnCapability = 0;
-	pBss->WPA.bMixMode		= FALSE;
-
-	// Init WPA2 setting
-	pBss->WPA2.PairCipher	 = Ndis802_11WEPDisabled;
-	pBss->WPA2.PairCipherAux = Ndis802_11WEPDisabled;
-	pBss->WPA2.GroupCipher	 = Ndis802_11WEPDisabled;
-	pBss->WPA2.RsnCapability = 0;
-	pBss->WPA2.bMixMode 	 = FALSE;
-
-
-	Length = (INT) pBss->VarIELen;
-
-	while (Length > 0)
-	{
-		// Parse cipher suite base on WPA1 & WPA2, they should be parsed differently
-		pTmp = ((PUCHAR) pBss->VarIEs) + pBss->VarIELen - Length;
-		pEid = (PEID_STRUCT) pTmp;
-		switch (pEid->Eid)
-		{
-			case IE_WPA:
-				//Parse Cisco IE_WPA (LEAP, CCKM, etc.)
-				if ( NdisEqualMemory((pTmp+8), CISCO_OUI, 3))
-				{
-					pTmp   += 11;
-					switch (*pTmp)
-					{
-						case 1:
-						case 5:	// Although WEP is not allowed in WPA related auth mode, we parse it anyway
-							pBss->WepStatus = Ndis802_11Encryption1Enabled;
-							pBss->WPA.PairCipher = Ndis802_11Encryption1Enabled;
-							pBss->WPA.GroupCipher = Ndis802_11Encryption1Enabled;
-							break;
-						case 2:
-							pBss->WepStatus = Ndis802_11Encryption2Enabled;
-							pBss->WPA.PairCipher = Ndis802_11Encryption1Enabled;
-							pBss->WPA.GroupCipher = Ndis802_11Encryption1Enabled;
-							break;
-						case 4:
-							pBss->WepStatus = Ndis802_11Encryption3Enabled;
-							pBss->WPA.PairCipher = Ndis802_11Encryption1Enabled;
-							pBss->WPA.GroupCipher = Ndis802_11Encryption1Enabled;
-							break;
-						default:
-							break;
-					}
-
-					// if Cisco IE_WPA, break
-					break;
-				}
-				else if (NdisEqualMemory(pEid->Octet, SES_OUI, 3) && (pEid->Len == 7))
-				{
-					pBss->bSES = TRUE;
-					break;
-				}
-				else if (NdisEqualMemory(pEid->Octet, WPA_OUI, 4) != 1)
-				{
-					// if unsupported vendor specific IE
-					break;
-				}
-				// Skip OUI, version, and multicast suite
-				// This part should be improved in the future when AP supported multiple cipher suite.
-				// For now, it's OK since almost all APs have fixed cipher suite supported.
-				// pTmp = (PUCHAR) pEid->Octet;
-				pTmp   += 11;
-
-				// Cipher Suite Selectors from Spec P802.11i/D3.2 P26.
-				//	Value	   Meaning
-				//	0			None
-				//	1			WEP-40
-				//	2			Tkip
-				//	3			WRAP
-				//	4			AES
-				//	5			WEP-104
-				// Parse group cipher
-				switch (*pTmp)
-				{
-					case 1:
-					case 5:	// Although WEP is not allowed in WPA related auth mode, we parse it anyway
-						pBss->WPA.GroupCipher = Ndis802_11Encryption1Enabled;
-						break;
-					case 2:
-						pBss->WPA.GroupCipher = Ndis802_11Encryption2Enabled;
-						break;
-					case 4:
-						pBss->WPA.GroupCipher = Ndis802_11Encryption3Enabled;
-						break;
-					default:
-						break;
-				}
-				// number of unicast suite
-				pTmp   += 1;
-
-				// skip all unicast cipher suites
-				//Count = *(PUSHORT) pTmp;
-				Count = (pTmp[1]<<8) + pTmp[0];
-				pTmp   += sizeof(USHORT);
-
-				// Parsing all unicast cipher suite
-				while (Count > 0)
-				{
-					// Skip OUI
-					pTmp += 3;
-					TmpCipher = Ndis802_11WEPDisabled;
-					switch (*pTmp)
-					{
-						case 1:
-						case 5: // Although WEP is not allowed in WPA related auth mode, we parse it anyway
-							TmpCipher = Ndis802_11Encryption1Enabled;
-							break;
-						case 2:
-							TmpCipher = Ndis802_11Encryption2Enabled;
-							break;
-						case 4:
-							TmpCipher = Ndis802_11Encryption3Enabled;
-							break;
-						default:
-							break;
-					}
-					if (TmpCipher > pBss->WPA.PairCipher)
-					{
-						// Move the lower cipher suite to PairCipherAux
-						pBss->WPA.PairCipherAux = pBss->WPA.PairCipher;
-						pBss->WPA.PairCipher	= TmpCipher;
-					}
-					else
-					{
-						pBss->WPA.PairCipherAux = TmpCipher;
-					}
-					pTmp++;
-					Count--;
-				}
-
-				// 4. get AKM suite counts
-				//Count	= *(PUSHORT) pTmp;
-				Count = (pTmp[1]<<8) + pTmp[0];
-				pTmp   += sizeof(USHORT);
-				pTmp   += 3;
-
-				switch (*pTmp)
-				{
-					case 1:
-						// Set AP support WPA mode
-						if (pBss->AuthMode == Ndis802_11AuthModeOpen)
-							pBss->AuthMode = Ndis802_11AuthModeWPA;
-						else
-							pBss->AuthModeAux = Ndis802_11AuthModeWPA;
-						break;
-					case 2:
-						// Set AP support WPA mode
-						if (pBss->AuthMode == Ndis802_11AuthModeOpen)
-							pBss->AuthMode = Ndis802_11AuthModeWPAPSK;
-						else
-							pBss->AuthModeAux = Ndis802_11AuthModeWPAPSK;
-						break;
-					default:
-						break;
-				}
-				pTmp   += 1;
-
-				// Fixed for WPA-None
-				if (pBss->BssType == BSS_ADHOC)
-				{
-					pBss->AuthMode	  = Ndis802_11AuthModeWPANone;
-					pBss->AuthModeAux = Ndis802_11AuthModeWPANone;
-					pBss->WepStatus   = pBss->WPA.GroupCipher;
-					if (pBss->WPA.PairCipherAux == Ndis802_11WEPDisabled)
-						pBss->WPA.PairCipherAux = pBss->WPA.GroupCipher;
-				}
-				else
-					pBss->WepStatus   = pBss->WPA.PairCipher;
-
-				// Check the Pair & Group, if different, turn on mixed mode flag
-				if (pBss->WPA.GroupCipher != pBss->WPA.PairCipher)
-					pBss->WPA.bMixMode = TRUE;
-
-				break;
-
-			case IE_RSN:
-				pRsnHeader = (PRSN_IE_HEADER_STRUCT) pTmp;
-
-				// 0. Version must be 1
-				if (le2cpu16(pRsnHeader->Version) != 1)
-					break;
-				pTmp   += sizeof(RSN_IE_HEADER_STRUCT);
-
-				// 1. Check group cipher
-				pCipher = (PCIPHER_SUITE_STRUCT) pTmp;
-				if (!RTMPEqualMemory(pTmp, RSN_OUI, 3))
-					break;
-
-				// Parse group cipher
-				switch (pCipher->Type)
-				{
-					case 1:
-					case 5:	// Although WEP is not allowed in WPA related auth mode, we parse it anyway
-						pBss->WPA2.GroupCipher = Ndis802_11Encryption1Enabled;
-						break;
-					case 2:
-						pBss->WPA2.GroupCipher = Ndis802_11Encryption2Enabled;
-						break;
-					case 4:
-						pBss->WPA2.GroupCipher = Ndis802_11Encryption3Enabled;
-						break;
-					default:
-						break;
-				}
-				// set to correct offset for next parsing
-				pTmp   += sizeof(CIPHER_SUITE_STRUCT);
-
-				// 2. Get pairwise cipher counts
-				//Count = *(PUSHORT) pTmp;
-				Count = (pTmp[1]<<8) + pTmp[0];
-				pTmp   += sizeof(USHORT);
-
-				// 3. Get pairwise cipher
-				// Parsing all unicast cipher suite
-				while (Count > 0)
-				{
-					// Skip OUI
-					pCipher = (PCIPHER_SUITE_STRUCT) pTmp;
-					TmpCipher = Ndis802_11WEPDisabled;
-					switch (pCipher->Type)
-					{
-						case 1:
-						case 5: // Although WEP is not allowed in WPA related auth mode, we parse it anyway
-							TmpCipher = Ndis802_11Encryption1Enabled;
-							break;
-						case 2:
-							TmpCipher = Ndis802_11Encryption2Enabled;
-							break;
-						case 4:
-							TmpCipher = Ndis802_11Encryption3Enabled;
-							break;
-						default:
-							break;
-					}
-					if (TmpCipher > pBss->WPA2.PairCipher)
-					{
-						// Move the lower cipher suite to PairCipherAux
-						pBss->WPA2.PairCipherAux = pBss->WPA2.PairCipher;
-						pBss->WPA2.PairCipher	 = TmpCipher;
-					}
-					else
-					{
-						pBss->WPA2.PairCipherAux = TmpCipher;
-					}
-					pTmp += sizeof(CIPHER_SUITE_STRUCT);
-					Count--;
-				}
-
-				// 4. get AKM suite counts
-				//Count	= *(PUSHORT) pTmp;
-				Count = (pTmp[1]<<8) + pTmp[0];
-				pTmp   += sizeof(USHORT);
-
-				// 5. Get AKM ciphers
-				pAKM = (PAKM_SUITE_STRUCT) pTmp;
-				if (!RTMPEqualMemory(pTmp, RSN_OUI, 3))
-					break;
-
-				switch (pAKM->Type)
-				{
-					case 1:
-						// Set AP support WPA mode
-						if (pBss->AuthMode == Ndis802_11AuthModeOpen)
-							pBss->AuthMode = Ndis802_11AuthModeWPA2;
-						else
-							pBss->AuthModeAux = Ndis802_11AuthModeWPA2;
-						break;
-					case 2:
-						// Set AP support WPA mode
-						if (pBss->AuthMode == Ndis802_11AuthModeOpen)
-							pBss->AuthMode = Ndis802_11AuthModeWPA2PSK;
-						else
-							pBss->AuthModeAux = Ndis802_11AuthModeWPA2PSK;
-						break;
-					default:
-						break;
-				}
-				pTmp   += (Count * sizeof(AKM_SUITE_STRUCT));
-
-				// Fixed for WPA-None
-				if (pBss->BssType == BSS_ADHOC)
-				{
-					pBss->AuthMode = Ndis802_11AuthModeWPANone;
-					pBss->AuthModeAux = Ndis802_11AuthModeWPANone;
-					pBss->WPA.PairCipherAux = pBss->WPA2.PairCipherAux;
-					pBss->WPA.GroupCipher	= pBss->WPA2.GroupCipher;
-					pBss->WepStatus 		= pBss->WPA.GroupCipher;
-					if (pBss->WPA.PairCipherAux == Ndis802_11WEPDisabled)
-						pBss->WPA.PairCipherAux = pBss->WPA.GroupCipher;
-				}
-				pBss->WepStatus   = pBss->WPA2.PairCipher;
-
-				// 6. Get RSN capability
-				//pBss->WPA2.RsnCapability = *(PUSHORT) pTmp;
-				pBss->WPA2.RsnCapability = (pTmp[1]<<8) + pTmp[0];
-				pTmp += sizeof(USHORT);
-
-				// Check the Pair & Group, if different, turn on mixed mode flag
-				if (pBss->WPA2.GroupCipher != pBss->WPA2.PairCipher)
-					pBss->WPA2.bMixMode = TRUE;
-
-				break;
-			default:
-				break;
-		}
-		Length -= (pEid->Len + 2);
-	}
-}
-
-// ===========================================================================================
-// mac_table.c
-// ===========================================================================================
-
-/*! \brief generates a random mac address value for IBSS BSSID
- *	\param Addr the bssid location
- *	\return none
- *	\pre
- *	\post
- */
-VOID MacAddrRandomBssid(
-	IN PRTMP_ADAPTER pAd,
-	OUT PUCHAR pAddr)
-{
-	INT i;
-
-	for (i = 0; i < MAC_ADDR_LEN; i++)
-	{
-		pAddr[i] = RandomByte(pAd);
-	}
-
-	pAddr[0] = (pAddr[0] & 0xfe) | 0x02;  // the first 2 bits must be 01xxxxxxxx
-}
-
-/*! \brief init the management mac frame header
- *	\param p_hdr mac header
- *	\param subtype subtype of the frame
- *	\param p_ds destination address, don't care if it is a broadcast address
- *	\return none
- *	\pre the station has the following information in the pAd->StaCfg
- *	 - bssid
- *	 - station address
- *	\post
- *	\note this function initializes the following field
-
- IRQL = PASSIVE_LEVEL
- IRQL = DISPATCH_LEVEL
-
- */
-VOID MgtMacHeaderInit(
-	IN	PRTMP_ADAPTER	pAd,
-	IN OUT PHEADER_802_11 pHdr80211,
-	IN UCHAR SubType,
-	IN UCHAR ToDs,
-	IN PUCHAR pDA,
-	IN PUCHAR pBssid)
-{
-	NdisZeroMemory(pHdr80211, sizeof(HEADER_802_11));
-
-	pHdr80211->FC.Type = BTYPE_MGMT;
-	pHdr80211->FC.SubType = SubType;
-//	if (SubType == SUBTYPE_ACK)	// sample, no use, it will conflict with ACTION frame sub type
-//		pHdr80211->FC.Type = BTYPE_CNTL;
-	pHdr80211->FC.ToDs = ToDs;
-	COPY_MAC_ADDR(pHdr80211->Addr1, pDA);
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		COPY_MAC_ADDR(pHdr80211->Addr2, pAd->CurrentAddress);
-#endif // CONFIG_STA_SUPPORT //
-	COPY_MAC_ADDR(pHdr80211->Addr3, pBssid);
-}
-
-// ===========================================================================================
-// mem_mgmt.c
-// ===========================================================================================
-
-/*!***************************************************************************
- * This routine build an outgoing frame, and fill all information specified
- * in argument list to the frame body. The actual frame size is the summation
- * of all arguments.
- * input params:
- *		Buffer - pointer to a pre-allocated memory segment
- *		args - a list of <int arg_size, arg> pairs.
- *		NOTE NOTE NOTE!!!! the last argument must be NULL, otherwise this
- *						   function will FAIL!!!
- * return:
- *		Size of the buffer
- * usage:
- *		MakeOutgoingFrame(Buffer, output_length, 2, &fc, 2, &dur, 6, p_addr1, 6,p_addr2, END_OF_ARGS);
-
- IRQL = PASSIVE_LEVEL
- IRQL = DISPATCH_LEVEL
-
- ****************************************************************************/
-ULONG MakeOutgoingFrame(
-	OUT CHAR *Buffer,
-	OUT ULONG *FrameLen, ...)
-{
-	CHAR   *p;
-	int 	leng;
-	ULONG	TotLeng;
-	va_list Args;
-
-	// calculates the total length
-	TotLeng = 0;
-	va_start(Args, FrameLen);
-	do
-	{
-		leng = va_arg(Args, int);
-		if (leng == END_OF_ARGS)
-		{
-			break;
-		}
-		p = va_arg(Args, PVOID);
-		NdisMoveMemory(&Buffer[TotLeng], p, leng);
-		TotLeng = TotLeng + leng;
-	} while(TRUE);
-
-	va_end(Args); /* clean up */
-	*FrameLen = TotLeng;
-	return TotLeng;
-}
-
-// ===========================================================================================
-// mlme_queue.c
-// ===========================================================================================
-
-/*! \brief	Initialize The MLME Queue, used by MLME Functions
- *	\param	*Queue	   The MLME Queue
- *	\return Always	   Return NDIS_STATE_SUCCESS in this implementation
- *	\pre
- *	\post
- *	\note	Because this is done only once (at the init stage), no need to be locked
-
- IRQL = PASSIVE_LEVEL
-
- */
-NDIS_STATUS MlmeQueueInit(
-	IN MLME_QUEUE *Queue)
-{
-	INT i;
-
-	NdisAllocateSpinLock(&Queue->Lock);
-
-	Queue->Num	= 0;
-	Queue->Head = 0;
-	Queue->Tail = 0;
-
-	for (i = 0; i < MAX_LEN_OF_MLME_QUEUE; i++)
-	{
-		Queue->Entry[i].Occupied = FALSE;
-		Queue->Entry[i].MsgLen = 0;
-		NdisZeroMemory(Queue->Entry[i].Msg, MGMT_DMA_BUFFER_SIZE);
-	}
-
-	return NDIS_STATUS_SUCCESS;
-}
-
-/*! \brief	 Enqueue a message for other threads, if they want to send messages to MLME thread
- *	\param	*Queue	  The MLME Queue
- *	\param	 Machine  The State Machine Id
- *	\param	 MsgType  The Message Type
- *	\param	 MsgLen   The Message length
- *	\param	*Msg	  The message pointer
- *	\return  TRUE if enqueue is successful, FALSE if the queue is full
- *	\pre
- *	\post
- *	\note	 The message has to be initialized
-
- IRQL = PASSIVE_LEVEL
- IRQL = DISPATCH_LEVEL
-
- */
-BOOLEAN MlmeEnqueue(
-	IN	PRTMP_ADAPTER	pAd,
-	IN ULONG Machine,
-	IN ULONG MsgType,
-	IN ULONG MsgLen,
-	IN VOID *Msg)
-{
-	INT Tail;
-	MLME_QUEUE	*Queue = (MLME_QUEUE *)&pAd->Mlme.Queue;
-
-	// Do nothing if the driver is starting halt state.
-	// This might happen when timer already been fired before cancel timer with mlmehalt
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
-		return FALSE;
-
-	// First check the size, it MUST not exceed the mlme queue size
-	if (MsgLen > MGMT_DMA_BUFFER_SIZE)
-	{
-		DBGPRINT_ERR(("MlmeEnqueue: msg too large, size = %ld \n", MsgLen));
-		return FALSE;
-	}
-
-	if (MlmeQueueFull(Queue))
-	{
-		return FALSE;
-	}
-
-	NdisAcquireSpinLock(&(Queue->Lock));
-	Tail = Queue->Tail;
-	Queue->Tail++;
-	Queue->Num++;
-	if (Queue->Tail == MAX_LEN_OF_MLME_QUEUE)
-	{
-		Queue->Tail = 0;
-	}
-
-	Queue->Entry[Tail].Wcid = RESERVED_WCID;
-	Queue->Entry[Tail].Occupied = TRUE;
-	Queue->Entry[Tail].Machine = Machine;
-	Queue->Entry[Tail].MsgType = MsgType;
-	Queue->Entry[Tail].MsgLen  = MsgLen;
-
-	if (Msg != NULL)
-	{
-		NdisMoveMemory(Queue->Entry[Tail].Msg, Msg, MsgLen);
-	}
-
-	NdisReleaseSpinLock(&(Queue->Lock));
-	return TRUE;
-}
-
-/*! \brief	 This function is used when Recv gets a MLME message
- *	\param	*Queue			 The MLME Queue
- *	\param	 TimeStampHigh	 The upper 32 bit of timestamp
- *	\param	 TimeStampLow	 The lower 32 bit of timestamp
- *	\param	 Rssi			 The receiving RSSI strength
- *	\param	 MsgLen 		 The length of the message
- *	\param	*Msg			 The message pointer
- *	\return  TRUE if everything ok, FALSE otherwise (like Queue Full)
- *	\pre
- *	\post
-
- IRQL = DISPATCH_LEVEL
-
- */
-BOOLEAN MlmeEnqueueForRecv(
-	IN	PRTMP_ADAPTER	pAd,
-	IN ULONG Wcid,
-	IN ULONG TimeStampHigh,
-	IN ULONG TimeStampLow,
-	IN UCHAR Rssi0,
-	IN UCHAR Rssi1,
-	IN UCHAR Rssi2,
-	IN ULONG MsgLen,
-	IN VOID *Msg,
-	IN UCHAR Signal)
-{
-	INT 		 Tail, Machine;
-	PFRAME_802_11 pFrame = (PFRAME_802_11)Msg;
-	INT		 MsgType;
-	MLME_QUEUE	*Queue = (MLME_QUEUE *)&pAd->Mlme.Queue;
-
-#ifdef RALINK_ATE
-	/* Nothing to do in ATE mode */
-	if(ATE_ON(pAd))
-		return FALSE;
-#endif // RALINK_ATE //
-
-	// Do nothing if the driver is starting halt state.
-	// This might happen when timer already been fired before cancel timer with mlmehalt
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
-	{
-		DBGPRINT_ERR(("MlmeEnqueueForRecv: fRTMP_ADAPTER_HALT_IN_PROGRESS\n"));
-		return FALSE;
-	}
-
-	// First check the size, it MUST not exceed the mlme queue size
-	if (MsgLen > MGMT_DMA_BUFFER_SIZE)
-	{
-		DBGPRINT_ERR(("MlmeEnqueueForRecv: frame too large, size = %ld \n", MsgLen));
-		return FALSE;
-	}
-
-	if (MlmeQueueFull(Queue))
-	{
-		return FALSE;
-	}
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if (!MsgTypeSubst(pAd, pFrame, &Machine, &MsgType))
-		{
-			DBGPRINT_ERR(("MlmeEnqueueForRecv: un-recongnized mgmt->subtype=%d\n",pFrame->Hdr.FC.SubType));
-			return FALSE;
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	// OK, we got all the informations, it is time to put things into queue
-	NdisAcquireSpinLock(&(Queue->Lock));
-	Tail = Queue->Tail;
-	Queue->Tail++;
-	Queue->Num++;
-	if (Queue->Tail == MAX_LEN_OF_MLME_QUEUE)
-	{
-		Queue->Tail = 0;
-	}
-	Queue->Entry[Tail].Occupied = TRUE;
-	Queue->Entry[Tail].Machine = Machine;
-	Queue->Entry[Tail].MsgType = MsgType;
-	Queue->Entry[Tail].MsgLen  = MsgLen;
-	Queue->Entry[Tail].TimeStamp.u.LowPart = TimeStampLow;
-	Queue->Entry[Tail].TimeStamp.u.HighPart = TimeStampHigh;
-	Queue->Entry[Tail].Rssi0 = Rssi0;
-	Queue->Entry[Tail].Rssi1 = Rssi1;
-	Queue->Entry[Tail].Rssi2 = Rssi2;
-	Queue->Entry[Tail].Signal = Signal;
-	Queue->Entry[Tail].Wcid = (UCHAR)Wcid;
-
-	Queue->Entry[Tail].Channel = pAd->LatchRfRegs.Channel;
-
-	if (Msg != NULL)
-	{
-		NdisMoveMemory(Queue->Entry[Tail].Msg, Msg, MsgLen);
-	}
-
-	NdisReleaseSpinLock(&(Queue->Lock));
-
-	RT28XX_MLME_HANDLER(pAd);
-
-	return TRUE;
-}
-
-
-/*! \brief	 Dequeue a message from the MLME Queue
- *	\param	*Queue	  The MLME Queue
- *	\param	*Elem	  The message dequeued from MLME Queue
- *	\return  TRUE if the Elem contains something, FALSE otherwise
- *	\pre
- *	\post
-
- IRQL = DISPATCH_LEVEL
-
- */
-BOOLEAN MlmeDequeue(
-	IN MLME_QUEUE *Queue,
-	OUT MLME_QUEUE_ELEM **Elem)
-{
-	NdisAcquireSpinLock(&(Queue->Lock));
-	*Elem = &(Queue->Entry[Queue->Head]);
-	Queue->Num--;
-	Queue->Head++;
-	if (Queue->Head == MAX_LEN_OF_MLME_QUEUE)
-	{
-		Queue->Head = 0;
-	}
-	NdisReleaseSpinLock(&(Queue->Lock));
-	return TRUE;
-}
-
-// IRQL = DISPATCH_LEVEL
-VOID	MlmeRestartStateMachine(
-	IN	PRTMP_ADAPTER	pAd)
-{
-#ifdef CONFIG_STA_SUPPORT
-	BOOLEAN				Cancelled;
-#endif // CONFIG_STA_SUPPORT //
-
-	DBGPRINT(RT_DEBUG_TRACE, ("MlmeRestartStateMachine \n"));
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-#ifdef QOS_DLS_SUPPORT
-		UCHAR i;
-#endif // QOS_DLS_SUPPORT //
-		// Cancel all timer events
-		// Be careful to cancel new added timer
-		RTMPCancelTimer(&pAd->MlmeAux.AssocTimer,	  &Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.ReassocTimer,   &Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.DisassocTimer,  &Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.AuthTimer,	   &Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer,	   &Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.ScanTimer,	   &Cancelled);
-
-#ifdef QOS_DLS_SUPPORT
-		for (i=0; i<MAX_NUM_OF_DLS_ENTRY; i++)
-		{
-			RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &Cancelled);
-		}
-#endif // QOS_DLS_SUPPORT //
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	// Change back to original channel in case of doing scan
-	AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
-	AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-
-	// Resume MSDU which is turned off durning scan
-	RTMPResumeMsduTransmission(pAd);
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// Set all state machines back IDLE
-		pAd->Mlme.CntlMachine.CurrState    = CNTL_IDLE;
-		pAd->Mlme.AssocMachine.CurrState   = ASSOC_IDLE;
-		pAd->Mlme.AuthMachine.CurrState    = AUTH_REQ_IDLE;
-		pAd->Mlme.AuthRspMachine.CurrState = AUTH_RSP_IDLE;
-		pAd->Mlme.SyncMachine.CurrState    = SYNC_IDLE;
-		pAd->Mlme.ActMachine.CurrState    = ACT_IDLE;
-#ifdef QOS_DLS_SUPPORT
-		pAd->Mlme.DlsMachine.CurrState    = DLS_IDLE;
-#endif // QOS_DLS_SUPPORT //
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-}
-
-/*! \brief	test if the MLME Queue is empty
- *	\param	*Queue	  The MLME Queue
- *	\return TRUE if the Queue is empty, FALSE otherwise
- *	\pre
- *	\post
-
- IRQL = DISPATCH_LEVEL
-
- */
-BOOLEAN MlmeQueueEmpty(
-	IN MLME_QUEUE *Queue)
-{
-	BOOLEAN Ans;
-
-	NdisAcquireSpinLock(&(Queue->Lock));
-	Ans = (Queue->Num == 0);
-	NdisReleaseSpinLock(&(Queue->Lock));
-
-	return Ans;
-}
-
-/*! \brief	 test if the MLME Queue is full
- *	\param	 *Queue 	 The MLME Queue
- *	\return  TRUE if the Queue is empty, FALSE otherwise
- *	\pre
- *	\post
-
- IRQL = PASSIVE_LEVEL
- IRQL = DISPATCH_LEVEL
-
- */
-BOOLEAN MlmeQueueFull(
-	IN MLME_QUEUE *Queue)
-{
-	BOOLEAN Ans;
-
-	NdisAcquireSpinLock(&(Queue->Lock));
-	Ans = (Queue->Num == MAX_LEN_OF_MLME_QUEUE || Queue->Entry[Queue->Tail].Occupied);
-	NdisReleaseSpinLock(&(Queue->Lock));
-
-	return Ans;
-}
-
-/*! \brief	 The destructor of MLME Queue
- *	\param
- *	\return
- *	\pre
- *	\post
- *	\note	Clear Mlme Queue, Set Queue->Num to Zero.
-
- IRQL = PASSIVE_LEVEL
-
- */
-VOID MlmeQueueDestroy(
-	IN MLME_QUEUE *pQueue)
-{
-	NdisAcquireSpinLock(&(pQueue->Lock));
-	pQueue->Num  = 0;
-	pQueue->Head = 0;
-	pQueue->Tail = 0;
-	NdisReleaseSpinLock(&(pQueue->Lock));
-	NdisFreeSpinLock(&(pQueue->Lock));
-}
-
-/*! \brief	 To substitute the message type if the message is coming from external
- *	\param	pFrame		   The frame received
- *	\param	*Machine	   The state machine
- *	\param	*MsgType	   the message type for the state machine
- *	\return TRUE if the substitution is successful, FALSE otherwise
- *	\pre
- *	\post
-
- IRQL = DISPATCH_LEVEL
-
- */
-#ifdef CONFIG_STA_SUPPORT
-BOOLEAN MsgTypeSubst(
-	IN PRTMP_ADAPTER  pAd,
-	IN PFRAME_802_11 pFrame,
-	OUT INT *Machine,
-	OUT INT *MsgType)
-{
-	USHORT	Seq;
-	UCHAR	EAPType;
-	PUCHAR	pData;
-
-	// Pointer to start of data frames including SNAP header
-	pData = (PUCHAR) pFrame + LENGTH_802_11;
-
-	// The only data type will pass to this function is EAPOL frame
-	if (pFrame->Hdr.FC.Type == BTYPE_DATA)
-	{
-		if (NdisEqualMemory(SNAP_AIRONET, pData, LENGTH_802_1_H))
-		{
-			// Cisco Aironet SNAP header
-			*Machine = AIRONET_STATE_MACHINE;
-			*MsgType = MT2_AIRONET_MSG;
-			return (TRUE);
-		}
-#ifdef LEAP_SUPPORT
-		if ( pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP ) //LEAP
-		{
-			// LEAP frames
-			*Machine = LEAP_STATE_MACHINE;
-			EAPType = *((UCHAR*)pFrame + LENGTH_802_11 + LENGTH_802_1_H + 1);
-			return (LeapMsgTypeSubst(EAPType, MsgType));
-		}
-		else
-#endif // LEAP_SUPPORT //
-		{
-			*Machine = WPA_PSK_STATE_MACHINE;
-			EAPType = *((UCHAR*)pFrame + LENGTH_802_11 + LENGTH_802_1_H + 1);
-			return(WpaMsgTypeSubst(EAPType, MsgType));
-		}
-	}
-
-	switch (pFrame->Hdr.FC.SubType)
-	{
-		case SUBTYPE_ASSOC_REQ:
-			*Machine = ASSOC_STATE_MACHINE;
-			*MsgType = MT2_PEER_ASSOC_REQ;
-			break;
-		case SUBTYPE_ASSOC_RSP:
-			*Machine = ASSOC_STATE_MACHINE;
-			*MsgType = MT2_PEER_ASSOC_RSP;
-			break;
-		case SUBTYPE_REASSOC_REQ:
-			*Machine = ASSOC_STATE_MACHINE;
-			*MsgType = MT2_PEER_REASSOC_REQ;
-			break;
-		case SUBTYPE_REASSOC_RSP:
-			*Machine = ASSOC_STATE_MACHINE;
-			*MsgType = MT2_PEER_REASSOC_RSP;
-			break;
-		case SUBTYPE_PROBE_REQ:
-			*Machine = SYNC_STATE_MACHINE;
-			*MsgType = MT2_PEER_PROBE_REQ;
-			break;
-		case SUBTYPE_PROBE_RSP:
-			*Machine = SYNC_STATE_MACHINE;
-			*MsgType = MT2_PEER_PROBE_RSP;
-			break;
-		case SUBTYPE_BEACON:
-			*Machine = SYNC_STATE_MACHINE;
-			*MsgType = MT2_PEER_BEACON;
-			break;
-		case SUBTYPE_ATIM:
-			*Machine = SYNC_STATE_MACHINE;
-			*MsgType = MT2_PEER_ATIM;
-			break;
-		case SUBTYPE_DISASSOC:
-			*Machine = ASSOC_STATE_MACHINE;
-			*MsgType = MT2_PEER_DISASSOC_REQ;
-			break;
-		case SUBTYPE_AUTH:
-			// get the sequence number from payload 24 Mac Header + 2 bytes algorithm
-			NdisMoveMemory(&Seq, &pFrame->Octet[2], sizeof(USHORT));
-			if (Seq == 1 || Seq == 3)
-			{
-				*Machine = AUTH_RSP_STATE_MACHINE;
-				*MsgType = MT2_PEER_AUTH_ODD;
-			}
-			else if (Seq == 2 || Seq == 4)
-			{
-				*Machine = AUTH_STATE_MACHINE;
-				*MsgType = MT2_PEER_AUTH_EVEN;
-			}
-			else
-			{
-				return FALSE;
-			}
-			break;
-		case SUBTYPE_DEAUTH:
-			*Machine = AUTH_RSP_STATE_MACHINE;
-			*MsgType = MT2_PEER_DEAUTH;
-			break;
-		case SUBTYPE_ACTION:
-			*Machine = ACTION_STATE_MACHINE;
-			//  Sometimes Sta will return with category bytes with MSB = 1, if they receive catogory out of their support
-			if ((pFrame->Octet[0]&0x7F) > MAX_PEER_CATE_MSG)
-			{
-				*MsgType = MT2_ACT_INVALID;
-			}
-			else
-			{
-				*MsgType = (pFrame->Octet[0]&0x7F);
-			}
-			break;
-		default:
-			return FALSE;
-			break;
-	}
-
-	return TRUE;
-}
-#endif // CONFIG_STA_SUPPORT //
-
-// ===========================================================================================
-// state_machine.c
-// ===========================================================================================
-
-/*! \brief Initialize the state machine.
- *	\param *S			pointer to the state machine
- *	\param	Trans		State machine transition function
- *	\param	StNr		number of states
- *	\param	MsgNr		number of messages
- *	\param	DefFunc 	default function, when there is invalid state/message combination
- *	\param	InitState	initial state of the state machine
- *	\param	Base		StateMachine base, internal use only
- *	\pre p_sm should be a legal pointer
- *	\post
-
- IRQL = PASSIVE_LEVEL
-
- */
-VOID StateMachineInit(
-	IN STATE_MACHINE *S,
-	IN STATE_MACHINE_FUNC Trans[],
-	IN ULONG StNr,
-	IN ULONG MsgNr,
-	IN STATE_MACHINE_FUNC DefFunc,
-	IN ULONG InitState,
-	IN ULONG Base)
-{
-	ULONG i, j;
-
-	// set number of states and messages
-	S->NrState = StNr;
-	S->NrMsg   = MsgNr;
-	S->Base    = Base;
-
-	S->TransFunc  = Trans;
-
-	// init all state transition to default function
-	for (i = 0; i < StNr; i++)
-	{
-		for (j = 0; j < MsgNr; j++)
-		{
-			S->TransFunc[i * MsgNr + j] = DefFunc;
-		}
-	}
-
-	// set the starting state
-	S->CurrState = InitState;
-}
-
-/*! \brief This function fills in the function pointer into the cell in the state machine
- *	\param *S	pointer to the state machine
- *	\param St	state
- *	\param Msg	incoming message
- *	\param f	the function to be executed when (state, message) combination occurs at the state machine
- *	\pre *S should be a legal pointer to the state machine, st, msg, should be all within the range, Base should be set in the initial state
- *	\post
-
- IRQL = PASSIVE_LEVEL
-
- */
-VOID StateMachineSetAction(
-	IN STATE_MACHINE *S,
-	IN ULONG St,
-	IN ULONG Msg,
-	IN STATE_MACHINE_FUNC Func)
-{
-	ULONG MsgIdx;
-
-	MsgIdx = Msg - S->Base;
-
-	if (St < S->NrState && MsgIdx < S->NrMsg)
-	{
-		// boundary checking before setting the action
-		S->TransFunc[St * S->NrMsg + MsgIdx] = Func;
-	}
-}
-
-/*! \brief	 This function does the state transition
- *	\param	 *Adapter the NIC adapter pointer
- *	\param	 *S 	  the state machine
- *	\param	 *Elem	  the message to be executed
- *	\return   None
-
- IRQL = DISPATCH_LEVEL
-
- */
-VOID StateMachinePerformAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN STATE_MACHINE *S,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	(*(S->TransFunc[S->CurrState * S->NrMsg + Elem->MsgType - S->Base]))(pAd, Elem);
-}
-
-/*
-	==========================================================================
-	Description:
-		The drop function, when machine executes this, the message is simply
-		ignored. This function does nothing, the message is freed in
-		StateMachinePerformAction()
-	==========================================================================
- */
-VOID Drop(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-}
-
-// ===========================================================================================
-// lfsr.c
-// ===========================================================================================
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = PASSIVE_LEVEL
-
-	==========================================================================
- */
-VOID LfsrInit(
-	IN PRTMP_ADAPTER pAd,
-	IN ULONG Seed)
-{
-	if (Seed == 0)
-		pAd->Mlme.ShiftReg = 1;
-	else
-		pAd->Mlme.ShiftReg = Seed;
-}
-
-/*
-	==========================================================================
-	Description:
-	==========================================================================
- */
-UCHAR RandomByte(
-	IN PRTMP_ADAPTER pAd)
-{
-	ULONG i;
-	UCHAR R, Result;
-
-	R = 0;
-
-	if (pAd->Mlme.ShiftReg == 0)
-	NdisGetSystemUpTime((ULONG *)&pAd->Mlme.ShiftReg);
-
-	for (i = 0; i < 8; i++)
-	{
-		if (pAd->Mlme.ShiftReg & 0x00000001)
-		{
-			pAd->Mlme.ShiftReg = ((pAd->Mlme.ShiftReg ^ LFSR_MASK) >> 1) | 0x80000000;
-			Result = 1;
-		}
-		else
-		{
-			pAd->Mlme.ShiftReg = pAd->Mlme.ShiftReg >> 1;
-			Result = 0;
-		}
-		R = (R << 1) | Result;
-	}
-
-	return R;
-}
-
-VOID AsicUpdateAutoFallBackTable(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pRateTable)
-{
-	UCHAR					i;
-	HT_FBK_CFG0_STRUC		HtCfg0;
-	HT_FBK_CFG1_STRUC		HtCfg1;
-	LG_FBK_CFG0_STRUC		LgCfg0;
-	LG_FBK_CFG1_STRUC		LgCfg1;
-	PRTMP_TX_RATE_SWITCH	pCurrTxRate, pNextTxRate;
-
-	// set to initial value
-	HtCfg0.word = 0x65432100;
-	HtCfg1.word = 0xedcba988;
-	LgCfg0.word = 0xedcba988;
-	LgCfg1.word = 0x00002100;
-
-	pNextTxRate = (PRTMP_TX_RATE_SWITCH)pRateTable+1;
-	for (i = 1; i < *((PUCHAR) pRateTable); i++)
-	{
-		pCurrTxRate = (PRTMP_TX_RATE_SWITCH)pRateTable+1+i;
-		switch (pCurrTxRate->Mode)
-		{
-			case 0:		//CCK
-				break;
-			case 1:		//OFDM
-				{
-					switch(pCurrTxRate->CurrMCS)
-					{
-						case 0:
-							LgCfg0.field.OFDMMCS0FBK = (pNextTxRate->Mode == MODE_OFDM) ? (pNextTxRate->CurrMCS+8): pNextTxRate->CurrMCS;
-							break;
-						case 1:
-							LgCfg0.field.OFDMMCS1FBK = (pNextTxRate->Mode == MODE_OFDM) ? (pNextTxRate->CurrMCS+8): pNextTxRate->CurrMCS;
-							break;
-						case 2:
-							LgCfg0.field.OFDMMCS2FBK = (pNextTxRate->Mode == MODE_OFDM) ? (pNextTxRate->CurrMCS+8): pNextTxRate->CurrMCS;
-							break;
-						case 3:
-							LgCfg0.field.OFDMMCS3FBK = (pNextTxRate->Mode == MODE_OFDM) ? (pNextTxRate->CurrMCS+8): pNextTxRate->CurrMCS;
-							break;
-						case 4:
-							LgCfg0.field.OFDMMCS4FBK = (pNextTxRate->Mode == MODE_OFDM) ? (pNextTxRate->CurrMCS+8): pNextTxRate->CurrMCS;
-							break;
-						case 5:
-							LgCfg0.field.OFDMMCS5FBK = (pNextTxRate->Mode == MODE_OFDM) ? (pNextTxRate->CurrMCS+8): pNextTxRate->CurrMCS;
-							break;
-						case 6:
-							LgCfg0.field.OFDMMCS6FBK = (pNextTxRate->Mode == MODE_OFDM) ? (pNextTxRate->CurrMCS+8): pNextTxRate->CurrMCS;
-							break;
-						case 7:
-							LgCfg0.field.OFDMMCS7FBK = (pNextTxRate->Mode == MODE_OFDM) ? (pNextTxRate->CurrMCS+8): pNextTxRate->CurrMCS;
-							break;
-					}
-				}
-				break;
-#ifdef DOT11_N_SUPPORT
-			case 2:		//HT-MIX
-			case 3:		//HT-GF
-				{
-					if ((pNextTxRate->Mode >= MODE_HTMIX) && (pCurrTxRate->CurrMCS != pNextTxRate->CurrMCS))
-					{
-						switch(pCurrTxRate->CurrMCS)
-						{
-							case 0:
-								HtCfg0.field.HTMCS0FBK = pNextTxRate->CurrMCS;
-								break;
-							case 1:
-								HtCfg0.field.HTMCS1FBK = pNextTxRate->CurrMCS;
-								break;
-							case 2:
-								HtCfg0.field.HTMCS2FBK = pNextTxRate->CurrMCS;
-								break;
-							case 3:
-								HtCfg0.field.HTMCS3FBK = pNextTxRate->CurrMCS;
-								break;
-							case 4:
-								HtCfg0.field.HTMCS4FBK = pNextTxRate->CurrMCS;
-								break;
-							case 5:
-								HtCfg0.field.HTMCS5FBK = pNextTxRate->CurrMCS;
-								break;
-							case 6:
-								HtCfg0.field.HTMCS6FBK = pNextTxRate->CurrMCS;
-								break;
-							case 7:
-								HtCfg0.field.HTMCS7FBK = pNextTxRate->CurrMCS;
-								break;
-							case 8:
-								HtCfg1.field.HTMCS8FBK = pNextTxRate->CurrMCS;
-								break;
-							case 9:
-								HtCfg1.field.HTMCS9FBK = pNextTxRate->CurrMCS;
-								break;
-							case 10:
-								HtCfg1.field.HTMCS10FBK = pNextTxRate->CurrMCS;
-								break;
-							case 11:
-								HtCfg1.field.HTMCS11FBK = pNextTxRate->CurrMCS;
-								break;
-							case 12:
-								HtCfg1.field.HTMCS12FBK = pNextTxRate->CurrMCS;
-								break;
-							case 13:
-								HtCfg1.field.HTMCS13FBK = pNextTxRate->CurrMCS;
-								break;
-							case 14:
-								HtCfg1.field.HTMCS14FBK = pNextTxRate->CurrMCS;
-								break;
-							case 15:
-								HtCfg1.field.HTMCS15FBK = pNextTxRate->CurrMCS;
-								break;
-							default:
-								DBGPRINT(RT_DEBUG_ERROR, ("AsicUpdateAutoFallBackTable: not support CurrMCS=%d\n", pCurrTxRate->CurrMCS));
-						}
-					}
-				}
-				break;
-#endif // DOT11_N_SUPPORT //
-		}
-
-		pNextTxRate = pCurrTxRate;
-	}
-
-	RTMP_IO_WRITE32(pAd, HT_FBK_CFG0, HtCfg0.word);
-	RTMP_IO_WRITE32(pAd, HT_FBK_CFG1, HtCfg1.word);
-	RTMP_IO_WRITE32(pAd, LG_FBK_CFG0, LgCfg0.word);
-	RTMP_IO_WRITE32(pAd, LG_FBK_CFG1, LgCfg1.word);
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Set MAC register value according operation mode.
-		OperationMode AND bNonGFExist are for MM and GF Proteciton.
-		If MM or GF mask is not set, those passing argument doesn't not take effect.
-
-		Operation mode meaning:
-		= 0 : Pure HT, no preotection.
-		= 0x01; there may be non-HT devices in both the control and extension channel, protection is optional in BSS.
-		= 0x10: No Transmission in 40M is protected.
-		= 0x11: Transmission in both 40M and 20M shall be protected
-		if (bNonGFExist)
-			we should choose not to use GF. But still set correct ASIC registers.
-	========================================================================
-*/
-VOID 	AsicUpdateProtect(
-	IN		PRTMP_ADAPTER	pAd,
-	IN 		USHORT			OperationMode,
-	IN 		UCHAR			SetMask,
-	IN		BOOLEAN			bDisableBGProtect,
-	IN		BOOLEAN			bNonGFExist)
-{
-	PROT_CFG_STRUC	ProtCfg, ProtCfg4;
-	UINT32 Protect[6];
-	USHORT			offset;
-	UCHAR			i;
-	UINT32 MacReg = 0;
-
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-#ifdef DOT11_N_SUPPORT
-	if (!(pAd->CommonCfg.bHTProtect) && (OperationMode != 8))
-	{
-		return;
-	}
-
-	if (pAd->BATable.numAsOriginator)
-	{
-		//
-		// enable the RTS/CTS to avoid channel collision
-		//
-		SetMask = ALLN_SETPROTECT;
-		OperationMode = 8;
-	}
-#endif // DOT11_N_SUPPORT //
-
-	// Config ASIC RTS threshold register
-	RTMP_IO_READ32(pAd, TX_RTS_CFG, &MacReg);
-	MacReg &= 0xFF0000FF;
-
-	// If the user want disable RtsThreshold and enable Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
-    if ((
-#ifdef DOT11_N_SUPPORT
-		(pAd->CommonCfg.BACapability.field.AmsduEnable) ||
-#endif // DOT11_N_SUPPORT //
-		(pAd->CommonCfg.bAggregationCapable == TRUE))
-        && pAd->CommonCfg.RtsThreshold == MAX_RTS_THRESHOLD)
-    {
-		MacReg |= (0x1000 << 8);
-    }
-    else
-    {
-		MacReg |= (pAd->CommonCfg.RtsThreshold << 8);
-    }
-
-	RTMP_IO_WRITE32(pAd, TX_RTS_CFG, MacReg);
-
-	// Initial common protection settings
-	RTMPZeroMemory(Protect, sizeof(Protect));
-	ProtCfg4.word = 0;
-	ProtCfg.word = 0;
-	ProtCfg.field.TxopAllowGF40 = 1;
-	ProtCfg.field.TxopAllowGF20 = 1;
-	ProtCfg.field.TxopAllowMM40 = 1;
-	ProtCfg.field.TxopAllowMM20 = 1;
-	ProtCfg.field.TxopAllowOfdm = 1;
-	ProtCfg.field.TxopAllowCck = 1;
-	ProtCfg.field.RTSThEn = 1;
-	ProtCfg.field.ProtectNav = ASIC_SHORTNAV;
-
-	// update PHY mode and rate
-	if (pAd->CommonCfg.Channel > 14)
-		ProtCfg.field.ProtectRate = 0x4000;
-	ProtCfg.field.ProtectRate |= pAd->CommonCfg.RtsRate;
-
-	// Handle legacy(B/G) protection
-	if (bDisableBGProtect)
-	{
-		//ProtCfg.field.ProtectRate = pAd->CommonCfg.RtsRate;
-		ProtCfg.field.ProtectCtrl = 0;
-		Protect[0] = ProtCfg.word;
-		Protect[1] = ProtCfg.word;
-	}
-	else
-	{
-		//ProtCfg.field.ProtectRate = pAd->CommonCfg.RtsRate;
-		ProtCfg.field.ProtectCtrl = 0;			// CCK do not need to be protected
-		Protect[0] = ProtCfg.word;
-		ProtCfg.field.ProtectCtrl = ASIC_CTS;	// OFDM needs using CCK to protect
-		Protect[1] = ProtCfg.word;
-	}
-
-#ifdef DOT11_N_SUPPORT
-	// Decide HT frame protection.
-	if ((SetMask & ALLN_SETPROTECT) != 0)
-	{
-		switch(OperationMode)
-		{
-			case 0x0:
-				// NO PROTECT
-				// 1.All STAs in the BSS are 20/40 MHz HT
-				// 2. in ai 20/40MHz BSS
-				// 3. all STAs are 20MHz in a 20MHz BSS
-				// Pure HT. no protection.
-
-				// MM20_PROT_CFG
-				//	Reserved (31:27)
-				// 	PROT_TXOP(25:20) -- 010111
-				//	PROT_NAV(19:18)  -- 01 (Short NAV protection)
-				//  PROT_CTRL(17:16) -- 00 (None)
-				// 	PROT_RATE(15:0)  -- 0x4004 (OFDM 24M)
-				Protect[2] = 0x01744004;
-
-				// MM40_PROT_CFG
-				//	Reserved (31:27)
-				// 	PROT_TXOP(25:20) -- 111111
-				//	PROT_NAV(19:18)  -- 01 (Short NAV protection)
-				//  PROT_CTRL(17:16) -- 00 (None)
-				// 	PROT_RATE(15:0)  -- 0x4084 (duplicate OFDM 24M)
-				Protect[3] = 0x03f44084;
-
-				// CF20_PROT_CFG
-				//	Reserved (31:27)
-				// 	PROT_TXOP(25:20) -- 010111
-				//	PROT_NAV(19:18)  -- 01 (Short NAV protection)
-				//  PROT_CTRL(17:16) -- 00 (None)
-				// 	PROT_RATE(15:0)  -- 0x4004 (OFDM 24M)
-				Protect[4] = 0x01744004;
-
-				// CF40_PROT_CFG
-				//	Reserved (31:27)
-				// 	PROT_TXOP(25:20) -- 111111
-				//	PROT_NAV(19:18)  -- 01 (Short NAV protection)
-				//  PROT_CTRL(17:16) -- 00 (None)
-				// 	PROT_RATE(15:0)  -- 0x4084 (duplicate OFDM 24M)
-				Protect[5] = 0x03f44084;
-
-				if (bNonGFExist)
-				{
-					// PROT_NAV(19:18)  -- 01 (Short NAV protectiion)
-					// PROT_CTRL(17:16) -- 01 (RTS/CTS)
-					Protect[4] = 0x01754004;
-					Protect[5] = 0x03f54084;
-				}
-				pAd->CommonCfg.IOTestParm.bRTSLongProtOn = FALSE;
-				break;
-
- 			case 1:
-				// This is "HT non-member protection mode."
-				// If there may be non-HT STAs my BSS
-				ProtCfg.word = 0x01744004;	// PROT_CTRL(17:16) : 0 (None)
-				ProtCfg4.word = 0x03f44084; // duplicaet legacy 24M. BW set 1.
-				if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_BG_PROTECTION_INUSED))
-				{
-					ProtCfg.word = 0x01740003;	//ERP use Protection bit is set, use protection rate at Clause 18..
-					ProtCfg4.word = 0x03f40003; // Don't duplicate RTS/CTS in CCK mode. 0x03f40083;
-				}
-				//Assign Protection method for 20&40 MHz packets
-				ProtCfg.field.ProtectCtrl = ASIC_RTS;
-				ProtCfg.field.ProtectNav = ASIC_SHORTNAV;
-				ProtCfg4.field.ProtectCtrl = ASIC_RTS;
-				ProtCfg4.field.ProtectNav = ASIC_SHORTNAV;
-				Protect[2] = ProtCfg.word;
-				Protect[3] = ProtCfg4.word;
-				Protect[4] = ProtCfg.word;
-				Protect[5] = ProtCfg4.word;
-				pAd->CommonCfg.IOTestParm.bRTSLongProtOn = TRUE;
-				break;
-
-			case 2:
-				// If only HT STAs are in BSS. at least one is 20MHz. Only protect 40MHz packets
-				ProtCfg.word = 0x01744004;  // PROT_CTRL(17:16) : 0 (None)
-				ProtCfg4.word = 0x03f44084; // duplicaet legacy 24M. BW set 1.
-
-				//Assign Protection method for 40MHz packets
-				ProtCfg4.field.ProtectCtrl = ASIC_RTS;
-				ProtCfg4.field.ProtectNav = ASIC_SHORTNAV;
-				Protect[2] = ProtCfg.word;
-				Protect[3] = ProtCfg4.word;
-				if (bNonGFExist)
-				{
-					ProtCfg.field.ProtectCtrl = ASIC_RTS;
-					ProtCfg.field.ProtectNav = ASIC_SHORTNAV;
-				}
-				Protect[4] = ProtCfg.word;
-				Protect[5] = ProtCfg4.word;
-
-				pAd->CommonCfg.IOTestParm.bRTSLongProtOn = FALSE;
-				break;
-
-			case 3:
-				// HT mixed mode.	 PROTECT ALL!
-				// Assign Rate
-				ProtCfg.word = 0x01744004;	//duplicaet legacy 24M. BW set 1.
-				ProtCfg4.word = 0x03f44084;
-				// both 20MHz and 40MHz are protected. Whether use RTS or CTS-to-self depends on the
-				if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_BG_PROTECTION_INUSED))
-				{
-					ProtCfg.word = 0x01740003;	//ERP use Protection bit is set, use protection rate at Clause 18..
-					ProtCfg4.word = 0x03f40003; // Don't duplicate RTS/CTS in CCK mode. 0x03f40083
-				}
-				//Assign Protection method for 20&40 MHz packets
-				ProtCfg.field.ProtectCtrl = ASIC_RTS;
-				ProtCfg.field.ProtectNav = ASIC_SHORTNAV;
-				ProtCfg4.field.ProtectCtrl = ASIC_RTS;
-				ProtCfg4.field.ProtectNav = ASIC_SHORTNAV;
-				Protect[2] = ProtCfg.word;
-				Protect[3] = ProtCfg4.word;
-				Protect[4] = ProtCfg.word;
-				Protect[5] = ProtCfg4.word;
-				pAd->CommonCfg.IOTestParm.bRTSLongProtOn = TRUE;
-				break;
-
-			case 8:
-				Protect[2] = 0x01754004;
-				Protect[3] = 0x03f54084;
-				Protect[4] = 0x01754004;
-				Protect[5] = 0x03f54084;
-				pAd->CommonCfg.IOTestParm.bRTSLongProtOn = TRUE;
-				break;
-		}
-	}
-#endif // DOT11_N_SUPPORT //
-
-	offset = CCK_PROT_CFG;
-	for (i = 0;i < 6;i++)
-	{
-		if ((SetMask & (1<< i)))
-		{
-			RTMP_IO_WRITE32(pAd, offset + i*4, Protect[i]);
-		}
-	}
-}
-
-
-#ifdef RT30xx
-/*
-	========================================================================
-
-	Routine Description: Write RT30xx RF register through MAC
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-NTSTATUS RT30xxWriteRFRegister(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			RegID,
-	IN	UCHAR			Value)
-{
-	RF_CSR_CFG_STRUC	rfcsr;
-	UINT				i = 0;
-
-	do
-	{
-		RTMP_IO_READ32(pAd, RF_CSR_CFG, &rfcsr.word);
-
-		if (!rfcsr.field.RF_CSR_KICK)
-			break;
-		i++;
-	}
-	while ((i < RETRY_LIMIT) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)));
-
-	if ((i == RETRY_LIMIT) || (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
-	{
-		DBGPRINT_RAW(RT_DEBUG_ERROR, ("Retry count exhausted or device removed!!!\n"));
-		return STATUS_UNSUCCESSFUL;
-	}
-
-	rfcsr.field.RF_CSR_WR = 1;
-	rfcsr.field.RF_CSR_KICK = 1;
-	rfcsr.field.TESTCSR_RFACC_REGNUM = RegID;
-	rfcsr.field.RF_CSR_DATA = Value;
-
-	RTMP_IO_WRITE32(pAd, RF_CSR_CFG, rfcsr.word);
-
-	return STATUS_SUCCESS;
-}
-
-
-/*
-	========================================================================
-
-	Routine Description: Read RT30xx RF register through MAC
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-NTSTATUS RT30xxReadRFRegister(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			RegID,
-	IN	PUCHAR			pValue)
-{
-	RF_CSR_CFG_STRUC	rfcsr;
-	UINT				i=0, k=0;
-
-	for (i=0; i<MAX_BUSY_COUNT; i++)
-	{
-		RTMP_IO_READ32(pAd, RF_CSR_CFG, &rfcsr.word);
-
-		if (rfcsr.field.RF_CSR_KICK == BUSY)
-		{
-			continue;
-		}
-		rfcsr.word = 0;
-		rfcsr.field.RF_CSR_WR = 0;
-		rfcsr.field.RF_CSR_KICK = 1;
-		rfcsr.field.TESTCSR_RFACC_REGNUM = RegID;
-		RTMP_IO_WRITE32(pAd, RF_CSR_CFG, rfcsr.word);
-		for (k=0; k<MAX_BUSY_COUNT; k++)
-		{
-			RTMP_IO_READ32(pAd, RF_CSR_CFG, &rfcsr.word);
-
-			if (rfcsr.field.RF_CSR_KICK == IDLE)
-				break;
-		}
-		if ((rfcsr.field.RF_CSR_KICK == IDLE) &&
-			(rfcsr.field.TESTCSR_RFACC_REGNUM == RegID))
-		{
-			*pValue = (UCHAR)rfcsr.field.RF_CSR_DATA;
-			break;
-		}
-	}
-	if (rfcsr.field.RF_CSR_KICK == BUSY)
-	{
-		DBGPRINT_ERR(("RF read R%d=0x%x fail, i[%d], k[%d]\n", RegID, rfcsr.word,i,k));
-		return STATUS_UNSUCCESSFUL;
-	}
-
-	return STATUS_SUCCESS;
-}
-#endif // RT30xx //
-
-#ifdef RT30xx
-// add by johnli, RF power sequence setup
-/*
-	==========================================================================
-	Description:
-
-	Load RF normal operation-mode setup
-
-	==========================================================================
- */
-VOID RT30xxLoadRFNormalModeSetup(
-	IN PRTMP_ADAPTER 	pAd)
-{
-	UCHAR RFValue;
-
-	// RX0_PD & TX0_PD, RF R1 register Bit 2 & Bit 3 to 0 and RF_BLOCK_en,RX1_PD & TX1_PD, Bit0, Bit 4 & Bit5 to 1
-	RT30xxReadRFRegister(pAd, RF_R01, &RFValue);
-	RFValue = (RFValue & (~0x0C)) | 0x31;
-	RT30xxWriteRFRegister(pAd, RF_R01, RFValue);
-
-	// TX_LO2_en, RF R15 register Bit 3 to 0
-	RT30xxReadRFRegister(pAd, RF_R15, &RFValue);
-	RFValue &= (~0x08);
-	RT30xxWriteRFRegister(pAd, RF_R15, RFValue);
-
-	// TX_LO1_en, RF R17 register Bit 3 to 0
-	RT30xxReadRFRegister(pAd, RF_R17, &RFValue);
-	RFValue &= (~0x08);
-	// to fix rx long range issue
-	if (((pAd->MACVersion & 0xffff) >= 0x0211) && (pAd->NicConfig2.field.ExternalLNAForG == 0))
-	{
-		RFValue |= 0x20;
-	}
-	RT30xxWriteRFRegister(pAd, RF_R17, RFValue);
-
-	// RX_LO1_en, RF R20 register Bit 3 to 0
-	RT30xxReadRFRegister(pAd, RF_R20, &RFValue);
-	RFValue &= (~0x08);
-	RT30xxWriteRFRegister(pAd, RF_R20, RFValue);
-
-	// RX_LO2_en, RF R21 register Bit 3 to 0
-	RT30xxReadRFRegister(pAd, RF_R21, &RFValue);
-	RFValue &= (~0x08);
-	RT30xxWriteRFRegister(pAd, RF_R21, RFValue);
-
-	// LDORF_VC, RF R27 register Bit 2 to 0
-	RT30xxReadRFRegister(pAd, RF_R27, &RFValue);
-	if ((pAd->MACVersion & 0xffff) < 0x0211)
-		RFValue = (RFValue & (~0x77)) | 0x3;
-	else
-		RFValue = (RFValue & (~0x77));
-	RT30xxWriteRFRegister(pAd, RF_R27, RFValue);
-	/* end johnli */
-}
-
-/*
-	==========================================================================
-	Description:
-
-	Load RF sleep-mode setup
-
-	==========================================================================
- */
-VOID RT30xxLoadRFSleepModeSetup(
-	IN PRTMP_ADAPTER 	pAd)
-{
-	UCHAR RFValue;
-	UINT32 MACValue;
-
-	// RF_BLOCK_en. RF R1 register Bit 0 to 0
-	RT30xxReadRFRegister(pAd, RF_R01, &RFValue);
-	RFValue &= (~0x01);
-	RT30xxWriteRFRegister(pAd, RF_R01, RFValue);
-
-	// VCO_IC, RF R7 register Bit 4 & Bit 5 to 0
-	RT30xxReadRFRegister(pAd, RF_R07, &RFValue);
-	RFValue &= (~0x30);
-	RT30xxWriteRFRegister(pAd, RF_R07, RFValue);
-
-	// Idoh, RF R9 register Bit 1, Bit 2 & Bit 3 to 0
-	RT30xxReadRFRegister(pAd, RF_R09, &RFValue);
-	RFValue &= (~0x0E);
-	RT30xxWriteRFRegister(pAd, RF_R09, RFValue);
-
-	// RX_CTB_en, RF R21 register Bit 7 to 0
-	RT30xxReadRFRegister(pAd, RF_R21, &RFValue);
-	RFValue &= (~0x80);
-	RT30xxWriteRFRegister(pAd, RF_R21, RFValue);
-
-	// LDORF_VC, RF R27 register Bit 0, Bit 1 & Bit 2 to 1
-	RT30xxReadRFRegister(pAd, RF_R27, &RFValue);
-	RFValue |= 0x77;
-	RT30xxWriteRFRegister(pAd, RF_R27, RFValue);
-
-	RTMP_IO_READ32(pAd, LDO_CFG0, &MACValue);
-	MACValue |= 0x1D000000;
-	RTMP_IO_WRITE32(pAd, LDO_CFG0, MACValue);
-}
-
-/*
-	==========================================================================
-	Description:
-
-	Reverse RF sleep-mode setup
-
-	==========================================================================
- */
-VOID RT30xxReverseRFSleepModeSetup(
-	IN PRTMP_ADAPTER 	pAd)
-{
-	UCHAR RFValue;
-	UINT32 MACValue;
-
-	// RF_BLOCK_en, RF R1 register Bit 0 to 1
-	RT30xxReadRFRegister(pAd, RF_R01, &RFValue);
-	RFValue |= 0x01;
-	RT30xxWriteRFRegister(pAd, RF_R01, RFValue);
-
-	// VCO_IC, RF R7 register Bit 4 & Bit 5 to 1
-	RT30xxReadRFRegister(pAd, RF_R07, &RFValue);
-	RFValue |= 0x30;
-	RT30xxWriteRFRegister(pAd, RF_R07, RFValue);
-
-	// Idoh, RF R9 register Bit 1, Bit 2 & Bit 3 to 1
-	RT30xxReadRFRegister(pAd, RF_R09, &RFValue);
-	RFValue |= 0x0E;
-	RT30xxWriteRFRegister(pAd, RF_R09, RFValue);
-
-	// RX_CTB_en, RF R21 register Bit 7 to 1
-	RT30xxReadRFRegister(pAd, RF_R21, &RFValue);
-	RFValue |= 0x80;
-	RT30xxWriteRFRegister(pAd, RF_R21, RFValue);
-
-	// LDORF_VC, RF R27 register Bit 2 to 0
-	RT30xxReadRFRegister(pAd, RF_R27, &RFValue);
-	if ((pAd->MACVersion & 0xffff) < 0x0211)
-		RFValue = (RFValue & (~0x77)) | 0x3;
-	else
-		RFValue = (RFValue & (~0x77));
-	RT30xxWriteRFRegister(pAd, RF_R27, RFValue);
-
-	// RT3071 version E has fixed this issue
-	if ((pAd->NicConfig2.field.DACTestBit == 1) && ((pAd->MACVersion & 0xffff) < 0x0211))
-	{
-		// patch tx EVM issue temporarily
-		RTMP_IO_READ32(pAd, LDO_CFG0, &MACValue);
-		MACValue = ((MACValue & 0xE0FFFFFF) | 0x0D000000);
-		RTMP_IO_WRITE32(pAd, LDO_CFG0, MACValue);
-	}
-	else
-	{
-		RTMP_IO_READ32(pAd, LDO_CFG0, &MACValue);
-		MACValue = ((MACValue & 0xE0FFFFFF) | 0x01000000);
-		RTMP_IO_WRITE32(pAd, LDO_CFG0, MACValue);
-	}
-}
-// end johnli
-#endif // RT30xx //
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AsicSwitchChannel(
-					  IN PRTMP_ADAPTER pAd,
-	IN	UCHAR			Channel,
-	IN	BOOLEAN			bScan)
-{
-	ULONG			R2 = 0, R3 = DEFAULT_RF_TX_POWER, R4 = 0;
-	CHAR    TxPwer = 0, TxPwer2 = DEFAULT_RF_TX_POWER; //Bbp94 = BBPR94_DEFAULT, TxPwer2 = DEFAULT_RF_TX_POWER;
-	UCHAR	index;
-	UINT32 	Value = 0; //BbpReg, Value;
-	RTMP_RF_REGS *RFRegTable;
-
-	// Search Tx power value
-#if 1
-	// We can't use ChannelList to search channel, since some central channl's txpowr doesn't list
-	// in ChannelList, so use TxPower array instead.
-	//
-	for (index = 0; index < MAX_NUM_OF_CHANNELS; index++)
-	{
-		if (Channel == pAd->TxPower[index].Channel)
-		{
-			TxPwer = pAd->TxPower[index].Power;
-			TxPwer2 = pAd->TxPower[index].Power2;
-			break;
-		}
-	}
-#else
-	for (index = 0; index < pAd->ChannelListNum; index++)
-	{
-		if (Channel == pAd->ChannelList[index].Channel)
-		{
-			TxPwer = pAd->ChannelList[index].Power;
-			TxPwer2 = pAd->ChannelList[index].Power2;
-			break;
-		}
-	}
-#endif
-
-	if (index == MAX_NUM_OF_CHANNELS)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("AsicSwitchChannel: Can't find the Channel#%d \n", Channel));
-	}
-
-#ifdef RT30xx
-	// The RF programming sequence is difference between 3xxx and 2xxx
-	if ((IS_RT3070(pAd) || IS_RT3090(pAd)) && ((pAd->RfIcType == RFIC_3020) || (pAd->RfIcType == RFIC_2020) ||
-		(pAd->RfIcType == RFIC_3021) || (pAd->RfIcType == RFIC_3022)))
-	{
-		/* modify by WY for Read RF Reg. error */
-		UCHAR RFValue;
-
-		for (index = 0; index < NUM_OF_3020_CHNL; index++)
-		{
-			if (Channel == FreqItems3020[index].Channel)
-			{
-				// Programming channel parameters
-				RT30xxWriteRFRegister(pAd, RF_R02, FreqItems3020[index].N);
-				RT30xxWriteRFRegister(pAd, RF_R03, FreqItems3020[index].K);
-				RT30xxReadRFRegister(pAd, RF_R06, &RFValue);
-				RFValue = (RFValue & 0xFC) | FreqItems3020[index].R;
-				RT30xxWriteRFRegister(pAd, RF_R06, RFValue);
-
-				// Set Tx0 Power
-				RT30xxReadRFRegister(pAd, RF_R12, &RFValue);
-				RFValue = (RFValue & 0xE0) | TxPwer;
-				RT30xxWriteRFRegister(pAd, RF_R12, RFValue);
-
-				// Set Tx1 Power
-				RT30xxReadRFRegister(pAd, RF_R13, &RFValue);
-				RFValue = (RFValue & 0xE0) | TxPwer2;
-				RT30xxWriteRFRegister(pAd, RF_R13, RFValue);
-
-				// Tx/Rx Stream setting
-				RT30xxReadRFRegister(pAd, RF_R01, &RFValue);
-				//if (IS_RT3090(pAd))
-				//	RFValue |= 0x01; // Enable RF block.
-				RFValue &= 0x03;	//clear bit[7~2]
-				if (pAd->Antenna.field.TxPath == 1)
-					RFValue |= 0xA0;
-				else if (pAd->Antenna.field.TxPath == 2)
-					RFValue |= 0x80;
-				if (pAd->Antenna.field.RxPath == 1)
-					RFValue |= 0x50;
-				else if (pAd->Antenna.field.RxPath == 2)
-					RFValue |= 0x40;
-				RT30xxWriteRFRegister(pAd, RF_R01, RFValue);
-
-				// Set RF offset
-				RT30xxReadRFRegister(pAd, RF_R23, &RFValue);
-				RFValue = (RFValue & 0x80) | pAd->RfFreqOffset;
-				RT30xxWriteRFRegister(pAd, RF_R23, RFValue);
-
-				// Set BW
-				if (!bScan && (pAd->CommonCfg.BBPCurrentBW == BW_40))
-				{
-					RFValue = pAd->Mlme.CaliBW40RfR24;
-					//DISABLE_11N_CHECK(pAd);
-				}
-				else
-				{
-					RFValue = pAd->Mlme.CaliBW20RfR24;
-				}
-				RT30xxWriteRFRegister(pAd, RF_R24, RFValue);
-				RT30xxWriteRFRegister(pAd, RF_R31, RFValue);
-
-				// Enable RF tuning
-				RT30xxReadRFRegister(pAd, RF_R07, &RFValue);
-				RFValue = RFValue | 0x1;
-				RT30xxWriteRFRegister(pAd, RF_R07, RFValue);
-
-				// latch channel for future usage.
-				pAd->LatchRfRegs.Channel = Channel;
-
-				DBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, Pwr0=%d, Pwr1=%d, %dT), N=0x%02X, K=0x%02X, R=0x%02X\n",
-					Channel,
-					pAd->RfIcType,
-					TxPwer,
-					TxPwer2,
-					pAd->Antenna.field.TxPath,
-					FreqItems3020[index].N,
-					FreqItems3020[index].K,
-					FreqItems3020[index].R));
-
-				break;
-			}
-		}
-	}
-	else
-#endif // RT30xx //
-
-	{
-		RFRegTable = RF2850RegTable;
-
-		switch (pAd->RfIcType)
-		{
-			case RFIC_2820:
-			case RFIC_2850:
-			case RFIC_2720:
-			case RFIC_2750:
-
-			for (index = 0; index < NUM_OF_2850_CHNL; index++)
-			{
-				if (Channel == RFRegTable[index].Channel)
-				{
-					R2 = RFRegTable[index].R2;
-					if (pAd->Antenna.field.TxPath == 1)
-					{
-						R2 |= 0x4000;	// If TXpath is 1, bit 14 = 1;
-					}
-
-					if (pAd->Antenna.field.RxPath == 2)
-					{
-						R2 |= 0x40;	// write 1 to off Rxpath.
-					}
-					else if (pAd->Antenna.field.RxPath == 1)
-					{
-						R2 |= 0x20040;	// write 1 to off RxPath
-					}
-
-					if (Channel > 14)
-					{
-						// initialize R3, R4
-						R3 = (RFRegTable[index].R3 & 0xffffc1ff);
-						R4 = (RFRegTable[index].R4 & (~0x001f87c0)) | (pAd->RfFreqOffset << 15);
-
-						// 5G band power range: 0xF9~0X0F, TX0 Reg3 bit9/TX1 Reg4 bit6="0" means the TX power reduce 7dB
-						// R3
-						if ((TxPwer >= -7) && (TxPwer < 0))
-						{
-							TxPwer = (7+TxPwer);
-							TxPwer = (TxPwer > 0xF) ? (0xF) : (TxPwer);
-							R3 |= (TxPwer << 10);
-							DBGPRINT(RT_DEBUG_ERROR, ("AsicSwitchChannel: TxPwer=%d \n", TxPwer));
-						}
-						else
-						{
-							TxPwer = (TxPwer > 0xF) ? (0xF) : (TxPwer);
-							R3 |= (TxPwer << 10) | (1 << 9);
-						}
-
-						// R4
-						if ((TxPwer2 >= -7) && (TxPwer2 < 0))
-						{
-							TxPwer2 = (7+TxPwer2);
-							TxPwer2 = (TxPwer2 > 0xF) ? (0xF) : (TxPwer2);
-							R4 |= (TxPwer2 << 7);
-							DBGPRINT(RT_DEBUG_ERROR, ("AsicSwitchChannel: TxPwer2=%d \n", TxPwer2));
-						}
-						else
-						{
-							TxPwer2 = (TxPwer2 > 0xF) ? (0xF) : (TxPwer2);
-							R4 |= (TxPwer2 << 7) | (1 << 6);
-						}
-					}
-					else
-					{
-						R3 = (RFRegTable[index].R3 & 0xffffc1ff) | (TxPwer << 9); // set TX power0
-					R4 = (RFRegTable[index].R4 & (~0x001f87c0)) | (pAd->RfFreqOffset << 15) | (TxPwer2 <<6);// Set freq Offset & TxPwr1
-					}
-
-					// Based on BBP current mode before changing RF channel.
-					if (!bScan && (pAd->CommonCfg.BBPCurrentBW == BW_40))
-					{
-						R4 |=0x200000;
-					}
-
-					// Update variables
-					pAd->LatchRfRegs.Channel = Channel;
-					pAd->LatchRfRegs.R1 = RFRegTable[index].R1;
-					pAd->LatchRfRegs.R2 = R2;
-					pAd->LatchRfRegs.R3 = R3;
-					pAd->LatchRfRegs.R4 = R4;
-
-					// Set RF value 1's set R3[bit2] = [0]
-					RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1);
-					RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2);
-					RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 & (~0x04)));
-					RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4);
-
-					RTMPusecDelay(200);
-
-					// Set RF value 2's set R3[bit2] = [1]
-					RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1);
-					RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2);
-					RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 | 0x04));
-					RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4);
-
-					RTMPusecDelay(200);
-
-					// Set RF value 3's set R3[bit2] = [0]
-					RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1);
-					RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2);
-					RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 & (~0x04)));
-					RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4);
-
-					break;
-				}
-			}
-			break;
-
-			default:
-			break;
-		}
-	}
-
-	// Change BBP setting during siwtch from a->g, g->a
-	if (Channel <= 14)
-	{
-	    ULONG	TxPinCfg = 0x00050F0A;//Gary 2007/08/09 0x050A0A
-
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R62, (0x37 - GET_LNA_GAIN(pAd)));
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R63, (0x37 - GET_LNA_GAIN(pAd)));
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R64, (0x37 - GET_LNA_GAIN(pAd)));
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0);//(0x44 - GET_LNA_GAIN(pAd)));	// According the Rory's suggestion to solve the middle range issue.
-		//RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0x62);
-
-		// Rx High power VGA offset for LNA select
-	    if (pAd->NicConfig2.field.ExternalLNAForG)
-	    {
-	        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0x62);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R75, 0x46);
-	    }
-	    else
-	    {
-	        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0x84);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R75, 0x50);
-	    }
-
-		// 5G band selection PIN, bit1 and bit2 are complement
-		RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
-		Value &= (~0x6);
-		Value |= (0x04);
-		RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
-
-        // Turn off unused PA or LNA when only 1T or 1R
-		if (pAd->Antenna.field.TxPath == 1)
-		{
-			TxPinCfg &= 0xFFFFFFF3;
-		}
-		if (pAd->Antenna.field.RxPath == 1)
-		{
-			TxPinCfg &= 0xFFFFF3FF;
-		}
-
-		RTMP_IO_WRITE32(pAd, TX_PIN_CFG, TxPinCfg);
-	}
-	else
-	{
-	    ULONG	TxPinCfg = 0x00050F05;//Gary 2007/8/9 0x050505
-
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R62, (0x37 - GET_LNA_GAIN(pAd)));
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R63, (0x37 - GET_LNA_GAIN(pAd)));
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R64, (0x37 - GET_LNA_GAIN(pAd)));
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0);//(0x44 - GET_LNA_GAIN(pAd)));   // According the Rory's suggestion to solve the middle range issue.
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0xF2);
-
-		// Rx High power VGA offset for LNA select
-		if (pAd->NicConfig2.field.ExternalLNAForA)
-		{
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R75, 0x46);
-		}
-		else
-		{
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R75, 0x50);
-		}
-
-		// 5G band selection PIN, bit1 and bit2 are complement
-		RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
-		Value &= (~0x6);
-		Value |= (0x02);
-		RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
-
-        // Turn off unused PA or LNA when only 1T or 1R
-		if (pAd->Antenna.field.TxPath == 1)
-		{
-			TxPinCfg &= 0xFFFFFFF3;
-	}
-		if (pAd->Antenna.field.RxPath == 1)
-		{
-			TxPinCfg &= 0xFFFFF3FF;
-	}
-
-		RTMP_IO_WRITE32(pAd, TX_PIN_CFG, TxPinCfg);
-	}
-
-    // R66 should be set according to Channel and use 20MHz when scanning
-	//RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, (0x2E + GET_LNA_GAIN(pAd)));
-	if (bScan)
-		RTMPSetAGCInitValue(pAd, BW_20);
-	else
-		RTMPSetAGCInitValue(pAd, pAd->CommonCfg.BBPCurrentBW);
-
-	//
-	// On 11A, We should delay and wait RF/BBP to be stable
-	// and the appropriate time should be 1000 micro seconds
-	// 2005/06/05 - On 11G, We also need this delay time. Otherwise it's difficult to pass the WHQL.
-	//
-	RTMPusecDelay(1000);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, Pwr0=%lu, Pwr1=%lu, %dT) to , R1=0x%08lx, R2=0x%08lx, R3=0x%08lx, R4=0x%08lx\n",
-							  Channel,
-							  pAd->RfIcType,
-							  (R3 & 0x00003e00) >> 9,
-							  (R4 & 0x000007c0) >> 6,
-							  pAd->Antenna.field.TxPath,
-							  pAd->LatchRfRegs.R1,
-							  pAd->LatchRfRegs.R2,
-							  pAd->LatchRfRegs.R3,
-							  pAd->LatchRfRegs.R4));
-}
-
-/*
-	==========================================================================
-	Description:
-		This function is required for 2421 only, and should not be used during
-		site survey. It's only required after NIC decided to stay at a channel
-		for a longer period.
-		When this function is called, it's always after AsicSwitchChannel().
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AsicLockChannel(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR Channel)
-{
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID	AsicAntennaSelect(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			Channel)
-{
-			if (pAd->Mlme.OneSecPeriodicRound % 2 == 1)
-			{
-				// patch for AsicSetRxAnt failed
-				pAd->RxAnt.EvaluatePeriod = 0;
-
-				// check every 2 second. If rcv-beacon less than 5 in the past 2 second, then AvgRSSI is no longer a
-				// valid indication of the distance between this AP and its clients.
-				if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
-				{
-					SHORT	realavgrssi1;
-
-					// if no traffic then reset average rssi to trigger evaluation
-#ifdef CONFIG_STA_SUPPORT
-					if (pAd->StaCfg.NumOfAvgRssiSample < 5)
-					{
-						pAd->RxAnt.Pair1LastAvgRssi = (-99);
-						pAd->RxAnt.Pair2LastAvgRssi = (-99);
-						DBGPRINT(RT_DEBUG_TRACE, ("MlmePeriodicExec: no traffic/beacon, reset RSSI\n"));
-					}
-
-					pAd->StaCfg.NumOfAvgRssiSample = 0;
-#endif // CONFIG_STA_SUPPORT //
-					realavgrssi1 = (pAd->RxAnt.Pair1AvgRssi[pAd->RxAnt.Pair1PrimaryRxAnt] >> 3);
-
-					DBGPRINT(RT_DEBUG_TRACE,("Ant-realrssi0(%d), Lastrssi0(%d), EvaluateStableCnt=%d\n", realavgrssi1, pAd->RxAnt.Pair1LastAvgRssi, pAd->RxAnt.EvaluateStableCnt));
-
-					// if the difference between two rssi is larger or less than 5, then evaluate the other antenna
-					if ((pAd->RxAnt.EvaluateStableCnt < 2) || (realavgrssi1 > (pAd->RxAnt.Pair1LastAvgRssi + 5)) || (realavgrssi1 < (pAd->RxAnt.Pair1LastAvgRssi - 5)))
-					{
-						pAd->RxAnt.Pair1LastAvgRssi = realavgrssi1;
-						AsicEvaluateRxAnt(pAd);
-					}
-				}
-				else
-				{
-					// if not connected, always switch antenna to try to connect
-					UCHAR	temp;
-
-					temp = pAd->RxAnt.Pair1PrimaryRxAnt;
-					pAd->RxAnt.Pair1PrimaryRxAnt = pAd->RxAnt.Pair1SecondaryRxAnt;
-					pAd->RxAnt.Pair1SecondaryRxAnt = temp;
-
-					DBGPRINT(RT_DEBUG_TRACE, ("MlmePeriodicExec: no connect, switch to another one to try connection\n"));
-
-					AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt);
-				}
-			}
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Antenna miscellaneous setting.
-
-	Arguments:
-		pAd						Pointer to our adapter
-		BandState				Indicate current Band State.
-
-	Return Value:
-		None
-
-	IRQL <= DISPATCH_LEVEL
-
-	Note:
-		1.) Frame End type control
-			only valid for G only (RF_2527 & RF_2529)
-			0: means DPDT, set BBP R4 bit 5 to 1
-			1: means SPDT, set BBP R4 bit 5 to 0
-
-
-	========================================================================
-*/
-VOID	AsicAntennaSetting(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	ABGBAND_STATE	BandState)
-{
-}
-
-VOID AsicRfTuningExec(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3)
-{
-}
-
-/*
-	==========================================================================
-	Description:
-		Gives CCK TX rate 2 more dB TX power.
-		This routine works only in LINK UP in INFRASTRUCTURE mode.
-
-		calculate desired Tx power in RF R3.Tx0~5,	should consider -
-		0. if current radio is a noisy environment (pAd->DrsCounters.fNoisyEnvironment)
-		1. TxPowerPercentage
-		2. auto calibration based on TSSI feedback
-		3. extra 2 db for CCK
-		4. -10 db upon very-short distance (AvgRSSI >= -40db) to AP
-
-	NOTE: Since this routine requires the value of (pAd->DrsCounters.fNoisyEnvironment),
-		it should be called AFTER MlmeDynamicTxRatSwitching()
-	==========================================================================
- */
-VOID AsicAdjustTxPower(
-	IN PRTMP_ADAPTER pAd)
-{
-	INT			i, j;
-	CHAR		DeltaPwr = 0;
-	BOOLEAN		bAutoTxAgc = FALSE;
-	UCHAR		TssiRef, *pTssiMinusBoundary, *pTssiPlusBoundary, TxAgcStep;
-	UCHAR		BbpR1 = 0, BbpR49 = 0, idx;
-	PCHAR		pTxAgcCompensate;
-	ULONG		TxPwr[5];
-	CHAR		Value;
-
-
-
-	if (pAd->CommonCfg.BBPCurrentBW == BW_40)
-	{
-		if (pAd->CommonCfg.CentralChannel > 14)
-		{
-			TxPwr[0] = pAd->Tx40MPwrCfgABand[0];
-			TxPwr[1] = pAd->Tx40MPwrCfgABand[1];
-			TxPwr[2] = pAd->Tx40MPwrCfgABand[2];
-			TxPwr[3] = pAd->Tx40MPwrCfgABand[3];
-			TxPwr[4] = pAd->Tx40MPwrCfgABand[4];
-		}
-		else
-		{
-			TxPwr[0] = pAd->Tx40MPwrCfgGBand[0];
-			TxPwr[1] = pAd->Tx40MPwrCfgGBand[1];
-			TxPwr[2] = pAd->Tx40MPwrCfgGBand[2];
-			TxPwr[3] = pAd->Tx40MPwrCfgGBand[3];
-			TxPwr[4] = pAd->Tx40MPwrCfgGBand[4];
-		}
-	}
-	else
-	{
-		if (pAd->CommonCfg.Channel > 14)
-		{
-			TxPwr[0] = pAd->Tx20MPwrCfgABand[0];
-			TxPwr[1] = pAd->Tx20MPwrCfgABand[1];
-			TxPwr[2] = pAd->Tx20MPwrCfgABand[2];
-			TxPwr[3] = pAd->Tx20MPwrCfgABand[3];
-			TxPwr[4] = pAd->Tx20MPwrCfgABand[4];
-		}
-		else
-		{
-			TxPwr[0] = pAd->Tx20MPwrCfgGBand[0];
-			TxPwr[1] = pAd->Tx20MPwrCfgGBand[1];
-			TxPwr[2] = pAd->Tx20MPwrCfgGBand[2];
-			TxPwr[3] = pAd->Tx20MPwrCfgGBand[3];
-			TxPwr[4] = pAd->Tx20MPwrCfgGBand[4];
-		}
-	}
-
-	// TX power compensation for temperature variation based on TSSI. try every 4 second
-	if (pAd->Mlme.OneSecPeriodicRound % 4 == 0)
-	{
-		if (pAd->CommonCfg.Channel <= 14)
-		{
-			/* bg channel */
-			bAutoTxAgc         = pAd->bAutoTxAgcG;
-			TssiRef            = pAd->TssiRefG;
-			pTssiMinusBoundary = &pAd->TssiMinusBoundaryG[0];
-			pTssiPlusBoundary  = &pAd->TssiPlusBoundaryG[0];
-			TxAgcStep          = pAd->TxAgcStepG;
-			pTxAgcCompensate   = &pAd->TxAgcCompensateG;
-		}
-		else
-		{
-			/* a channel */
-			bAutoTxAgc         = pAd->bAutoTxAgcA;
-			TssiRef            = pAd->TssiRefA;
-			pTssiMinusBoundary = &pAd->TssiMinusBoundaryA[0];
-			pTssiPlusBoundary  = &pAd->TssiPlusBoundaryA[0];
-			TxAgcStep          = pAd->TxAgcStepA;
-			pTxAgcCompensate   = &pAd->TxAgcCompensateA;
-		}
-
-		if (bAutoTxAgc)
-		{
-			/* BbpR1 is unsigned char */
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R49, &BbpR49);
-
-			/* (p) TssiPlusBoundaryG[0] = 0 = (m) TssiMinusBoundaryG[0] */
-			/* compensate: +4     +3   +2   +1    0   -1   -2   -3   -4 * steps */
-			/* step value is defined in pAd->TxAgcStepG for tx power value */
-
-			/* [4]+1+[4]   p4     p3   p2   p1   o1   m1   m2   m3   m4 */
-			/* ex:         0x00 0x15 0x25 0x45 0x88 0xA0 0xB5 0xD0 0xF0
-			   above value are examined in mass factory production */
-			/*             [4]    [3]  [2]  [1]  [0]  [1]  [2]  [3]  [4] */
-
-			/* plus (+) is 0x00 ~ 0x45, minus (-) is 0xa0 ~ 0xf0 */
-			/* if value is between p1 ~ o1 or o1 ~ s1, no need to adjust tx power */
-			/* if value is 0xa5, tx power will be -= TxAgcStep*(2-1) */
-
-			if (BbpR49 > pTssiMinusBoundary[1])
-			{
-				// Reading is larger than the reference value
-				// check for how large we need to decrease the Tx power
-				for (idx = 1; idx < 5; idx++)
-				{
-					if (BbpR49 <= pTssiMinusBoundary[idx])  // Found the range
-						break;
-				}
-				// The index is the step we should decrease, idx = 0 means there is nothing to compensate
-//				if (R3 > (ULONG) (TxAgcStep * (idx-1)))
-					*pTxAgcCompensate = -(TxAgcStep * (idx-1));
-//				else
-//					*pTxAgcCompensate = -((UCHAR)R3);
-
-				DeltaPwr += (*pTxAgcCompensate);
-				DBGPRINT(RT_DEBUG_TRACE, ("-- Tx Power, BBP R1=%x, TssiRef=%x, TxAgcStep=%x, step = -%d\n",
-					BbpR49, TssiRef, TxAgcStep, idx-1));
-			}
-			else if (BbpR49 < pTssiPlusBoundary[1])
-			{
-				// Reading is smaller than the reference value
-				// check for how large we need to increase the Tx power
-				for (idx = 1; idx < 5; idx++)
-				{
-					if (BbpR49 >= pTssiPlusBoundary[idx])   // Found the range
-						break;
-				}
-				// The index is the step we should increase, idx = 0 means there is nothing to compensate
-				*pTxAgcCompensate = TxAgcStep * (idx-1);
-				DeltaPwr += (*pTxAgcCompensate);
-				DBGPRINT(RT_DEBUG_TRACE, ("++ Tx Power, BBP R1=%x, TssiRef=%x, TxAgcStep=%x, step = +%d\n",
-					BbpR49, TssiRef, TxAgcStep, idx-1));
-			}
-			else
-			{
-				*pTxAgcCompensate = 0;
-				DBGPRINT(RT_DEBUG_TRACE, ("   Tx Power, BBP R49=%x, TssiRef=%x, TxAgcStep=%x, step = +%d\n",
-					BbpR49, TssiRef, TxAgcStep, 0));
-			}
-		}
-	}
-	else
-	{
-		if (pAd->CommonCfg.Channel <= 14)
-		{
-			bAutoTxAgc         = pAd->bAutoTxAgcG;
-			pTxAgcCompensate   = &pAd->TxAgcCompensateG;
-		}
-		else
-		{
-			bAutoTxAgc         = pAd->bAutoTxAgcA;
-			pTxAgcCompensate   = &pAd->TxAgcCompensateA;
-		}
-
-		if (bAutoTxAgc)
-			DeltaPwr += (*pTxAgcCompensate);
-	}
-
-	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BbpR1);
-	BbpR1 &= 0xFC;
-
-#ifdef SINGLE_SKU
-	// Handle regulatory max tx power constrain
-	do
-	{
-		UCHAR    TxPwrInEEPROM = 0xFF, CountryTxPwr = 0xFF, criterion;
-		UCHAR    AdjustMaxTxPwr[40];
-
-		if (pAd->CommonCfg.Channel > 14) // 5G band
-			TxPwrInEEPROM = ((pAd->CommonCfg.DefineMaxTxPwr & 0xFF00) >> 8);
-		else // 2.4G band
-			TxPwrInEEPROM = (pAd->CommonCfg.DefineMaxTxPwr & 0x00FF);
-		CountryTxPwr = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
-
-		// error handling, range check
-		if ((TxPwrInEEPROM > 0x50) || (CountryTxPwr > 0x50))
-		{
-			DBGPRINT(RT_DEBUG_ERROR,("AsicAdjustTxPower - Invalid max tx power (=0x%02x), CountryTxPwr=%d\n", TxPwrInEEPROM, CountryTxPwr));
-			break;
-		}
-
-		criterion = *((PUCHAR)TxPwr + 2) & 0xF;        // FAE use OFDM 6M as criterion
-
-		DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (criterion=%d, TxPwrInEEPROM=%d, CountryTxPwr=%d)\n", criterion, TxPwrInEEPROM, CountryTxPwr));
-
-		// Adjust max tx power according to the relationship of tx power in E2PROM
-		for (i=0; i<5; i++)
-		{
-			// CCK will have 4dBm larger than OFDM
-			// Therefore, we should separate to parse the tx power field
-			if (i == 0)
-			{
-				for (j=0; j<8; j++)
-				{
-					Value = (CHAR)((TxPwr[i] >> j*4) & 0x0F);
-
-					if (j < 4)
-					{
-						// CCK will have 4dBm larger than OFDM
-						AdjustMaxTxPwr[i*8+j] = TxPwrInEEPROM + (Value - criterion) + 4;
-					}
-					else
-					{
-						AdjustMaxTxPwr[i*8+j] = TxPwrInEEPROM + (Value - criterion);
-					}
-					DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (i/j=%d/%d, Value=%d, %d)\n", i, j, Value, AdjustMaxTxPwr[i*8+j]));
-				}
-			}
-			else
-			{
-				for (j=0; j<8; j++)
-				{
-					Value = (CHAR)((TxPwr[i] >> j*4) & 0x0F);
-
-					AdjustMaxTxPwr[i*8+j] = TxPwrInEEPROM + (Value - criterion);
-					DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (i/j=%d/%d, Value=%d, %d)\n", i, j, Value, AdjustMaxTxPwr[i*8+j]));
-				}
-			}
-		}
-
-		// Adjust tx power according to the relationship
-		for (i=0; i<5; i++)
-		{
-			if (TxPwr[i] != 0xffffffff)
-			{
-				for (j=0; j<8; j++)
-				{
-					Value = (CHAR)((TxPwr[i] >> j*4) & 0x0F);
-
-					// The system tx power is larger than the regulatory, the power should be restrain
-					if (AdjustMaxTxPwr[i*8+j] > CountryTxPwr)
-					{
-						// decrease to zero and don't need to take care BBPR1
-						if ((Value - (AdjustMaxTxPwr[i*8+j] - CountryTxPwr)) > 0)
-							Value -= (AdjustMaxTxPwr[i*8+j] - CountryTxPwr);
-						else
-							Value = 0;
-
-						DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (i/j=%d/%d, Value=%d, %d)\n", i, j, Value, AdjustMaxTxPwr[i*8+j]));
-					}
-					else
-						DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (i/j=%d/%d, Value=%d, %d, no change)\n", i, j, Value, AdjustMaxTxPwr[i*8+j]));
-
-						TxPwr[i] = (TxPwr[i] & ~(0x0000000F << j*4)) | (Value << j*4);
-				}
-			}
-		}
-	} while (FALSE);
-#endif // SINGLE_SKU //
-
-	/* calculate delta power based on the percentage specified from UI */
-	// E2PROM setting is calibrated for maximum TX power (i.e. 100%)
-	// We lower TX power here according to the percentage specified from UI
-	if (pAd->CommonCfg.TxPowerPercentage == 0xffffffff)       // AUTO TX POWER control
-		;
-	else if (pAd->CommonCfg.TxPowerPercentage > 90)  // 91 ~ 100% & AUTO, treat as 100% in terms of mW
-		;
-	else if (pAd->CommonCfg.TxPowerPercentage > 60)  // 61 ~ 90%, treat as 75% in terms of mW		// DeltaPwr -= 1;
-	{
-		DeltaPwr -= 1;
-	}
-	else if (pAd->CommonCfg.TxPowerPercentage > 30)  // 31 ~ 60%, treat as 50% in terms of mW		// DeltaPwr -= 3;
-	{
-		DeltaPwr -= 3;
-	}
-	else if (pAd->CommonCfg.TxPowerPercentage > 15)  // 16 ~ 30%, treat as 25% in terms of mW		// DeltaPwr -= 6;
-	{
-		BbpR1 |= 0x01;
-	}
-	else if (pAd->CommonCfg.TxPowerPercentage > 9)   // 10 ~ 15%, treat as 12.5% in terms of mW		// DeltaPwr -= 9;
-	{
-		BbpR1 |= 0x01;
-		DeltaPwr -= 3;
-	}
-	else                                           // 0 ~ 9 %, treat as MIN(~3%) in terms of mW		// DeltaPwr -= 12;
-	{
-		BbpR1 |= 0x02;
-	}
-
-	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BbpR1);
-
-	/* reset different new tx power for different TX rate */
-	for(i=0; i<5; i++)
-	{
-		if (TxPwr[i] != 0xffffffff)
-		{
-			for (j=0; j<8; j++)
-			{
-				Value = (CHAR)((TxPwr[i] >> j*4) & 0x0F); /* 0 ~ 15 */
-
-				if ((Value + DeltaPwr) < 0)
-				{
-					Value = 0; /* min */
-				}
-				else if ((Value + DeltaPwr) > 0xF)
-				{
-					Value = 0xF; /* max */
-				}
-				else
-				{
-					Value += DeltaPwr; /* temperature compensation */
-				}
-
-				/* fill new value to CSR offset */
-				TxPwr[i] = (TxPwr[i] & ~(0x0000000F << j*4)) | (Value << j*4);
-			}
-
-			/* write tx power value to CSR */
-			/* TX_PWR_CFG_0 (8 tx rate) for	TX power for OFDM 12M/18M
-											TX power for OFDM 6M/9M
-											TX power for CCK5.5M/11M
-											TX power for CCK1M/2M */
-			/* TX_PWR_CFG_1 ~ TX_PWR_CFG_4 */
-			RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, TxPwr[i]);
-		}
-	}
-
-
-}
-
-#ifdef CONFIG_STA_SUPPORT
-/*
-	==========================================================================
-	Description:
-		put PHY to sleep here, and set next wakeup timer. PHY doesn't not wakeup
-		automatically. Instead, MCU will issue a TwakeUpInterrupt to host after
-		the wakeup timer timeout. Driver has to issue a separate command to wake
-		PHY up.
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AsicSleepThenAutoWakeup(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT TbttNumToNextWakeUp)
-{
-    RT28XX_STA_SLEEP_THEN_AUTO_WAKEUP(pAd, TbttNumToNextWakeUp);
-}
-
-/*
-	==========================================================================
-	Description:
-		AsicForceWakeup() is used whenever manual wakeup is required
-		AsicForceSleep() should only be used when not in INFRA BSS. When
-		in INFRA BSS, we should use AsicSleepThenAutoWakeup() instead.
-	==========================================================================
- */
-VOID AsicForceSleep(
-	IN PRTMP_ADAPTER pAd)
-{
-
-}
-
-/*
-	==========================================================================
-	Description:
-		AsicForceWakeup() is used whenever Twakeup timer (set via AsicSleepThenAutoWakeup)
-		expired.
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-	==========================================================================
- */
-VOID AsicForceWakeup(
-	IN PRTMP_ADAPTER pAd,
-	IN BOOLEAN    bFromTx)
-{
-    DBGPRINT(RT_DEBUG_TRACE, ("--> AsicForceWakeup \n"));
-    RT28XX_STA_FORCE_WAKEUP(pAd, bFromTx);
-}
-#endif // CONFIG_STA_SUPPORT //
-/*
-	==========================================================================
-	Description:
-		Set My BSSID
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AsicSetBssid(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pBssid)
-{
-	ULONG		  Addr4;
-	DBGPRINT(RT_DEBUG_TRACE, ("==============> AsicSetBssid %x:%x:%x:%x:%x:%x\n",
-		pBssid[0],pBssid[1],pBssid[2],pBssid[3], pBssid[4],pBssid[5]));
-
-	Addr4 = (ULONG)(pBssid[0])		 |
-			(ULONG)(pBssid[1] << 8)  |
-			(ULONG)(pBssid[2] << 16) |
-			(ULONG)(pBssid[3] << 24);
-	RTMP_IO_WRITE32(pAd, MAC_BSSID_DW0, Addr4);
-
-	Addr4 = 0;
-	// always one BSSID in STA mode
-	Addr4 = (ULONG)(pBssid[4]) | (ULONG)(pBssid[5] << 8);
-
-	RTMP_IO_WRITE32(pAd, MAC_BSSID_DW1, Addr4);
-}
-
-VOID AsicSetMcastWC(
-	IN PRTMP_ADAPTER pAd)
-{
-	MAC_TABLE_ENTRY *pEntry = &pAd->MacTab.Content[MCAST_WCID];
-	USHORT		offset;
-
-	pEntry->Sst        = SST_ASSOC;
-	pEntry->Aid        = MCAST_WCID;	// Softap supports 1 BSSID and use WCID=0 as multicast Wcid index
-	pEntry->PsMode     = PWR_ACTIVE;
-	pEntry->CurrTxRate = pAd->CommonCfg.MlmeRate;
-	offset = MAC_WCID_BASE + BSS0Mcast_WCID * HW_WCID_ENTRY_SIZE;
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AsicDelWcidTab(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR	Wcid)
-{
-	ULONG		  Addr0 = 0x0, Addr1 = 0x0;
-	ULONG 		offset;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("AsicDelWcidTab==>Wcid = 0x%x\n",Wcid));
-	offset = MAC_WCID_BASE + Wcid * HW_WCID_ENTRY_SIZE;
-	RTMP_IO_WRITE32(pAd, offset, Addr0);
-	offset += 4;
-	RTMP_IO_WRITE32(pAd, offset, Addr1);
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AsicEnableRDG(
-	IN PRTMP_ADAPTER pAd)
-{
-	TX_LINK_CFG_STRUC	TxLinkCfg;
-	UINT32				Data = 0;
-
-	RTMP_IO_READ32(pAd, TX_LINK_CFG, &TxLinkCfg.word);
-	TxLinkCfg.field.TxRDGEn = 1;
-	RTMP_IO_WRITE32(pAd, TX_LINK_CFG, TxLinkCfg.word);
-
-	RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &Data);
-	Data  &= 0xFFFFFF00;
-	Data  |= 0x80;
-	RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, Data);
-
-	//OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED);
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AsicDisableRDG(
-	IN PRTMP_ADAPTER pAd)
-{
-	TX_LINK_CFG_STRUC	TxLinkCfg;
-	UINT32				Data = 0;
-
-
-	RTMP_IO_READ32(pAd, TX_LINK_CFG, &TxLinkCfg.word);
-	TxLinkCfg.field.TxRDGEn = 0;
-	RTMP_IO_WRITE32(pAd, TX_LINK_CFG, TxLinkCfg.word);
-
-	RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &Data);
-
-	Data  &= 0xFFFFFF00;
-	//Data  |= 0x20;
-#ifndef WIFI_TEST
-	//if ( pAd->CommonCfg.bEnableTxBurst )
-	//	Data |= 0x60; // for performance issue not set the TXOP to 0
-#endif
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_DYNAMIC_BE_TXOP_ACTIVE)
-#ifdef DOT11_N_SUPPORT
-		&& (pAd->MacTab.fAnyStationMIMOPSDynamic == FALSE)
-#endif // DOT11_N_SUPPORT //
-	)
-	{
-		// For CWC test, change txop from 0x30 to 0x20 in TxBurst mode
-		if (pAd->CommonCfg.bEnableTxBurst)
-			Data |= 0x20;
-	}
-	RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, Data);
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AsicDisableSync(
-	IN PRTMP_ADAPTER pAd)
-{
-	BCN_TIME_CFG_STRUC csr;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("--->Disable TSF synchronization\n"));
-
-	// 2003-12-20 disable TSF and TBTT while NIC in power-saving have side effect
-	//			  that NIC will never wakes up because TSF stops and no more
-	//			  TBTT interrupts
-	pAd->TbttTickCount = 0;
-	RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr.word);
-	csr.field.bBeaconGen = 0;
-	csr.field.bTBTTEnable = 0;
-	csr.field.TsfSyncMode = 0;
-	csr.field.bTsfTicking = 0;
-	RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr.word);
-
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AsicEnableBssSync(
-	IN PRTMP_ADAPTER pAd)
-{
-	BCN_TIME_CFG_STRUC csr;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("--->AsicEnableBssSync(INFRA mode)\n"));
-
-	RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr.word);
-//	RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, 0x00000000);
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		csr.field.BeaconInterval = pAd->CommonCfg.BeaconPeriod << 4; // ASIC register in units of 1/16 TU
-		csr.field.bTsfTicking = 1;
-		csr.field.TsfSyncMode = 1; // sync TSF in INFRASTRUCTURE mode
-		csr.field.bBeaconGen  = 0; // do NOT generate BEACON
-		csr.field.bTBTTEnable = 1;
-	}
-#endif // CONFIG_STA_SUPPORT //
-	RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr.word);
-}
-
-/*
-	==========================================================================
-	Description:
-	Note:
-		BEACON frame in shared memory should be built ok before this routine
-		can be called. Otherwise, a garbage frame maybe transmitted out every
-		Beacon period.
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AsicEnableIbssSync(
-	IN PRTMP_ADAPTER pAd)
-{
-	BCN_TIME_CFG_STRUC csr9;
-	PUCHAR			ptr;
-	UINT i;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("--->AsicEnableIbssSync(ADHOC mode. MPDUtotalByteCount = %d)\n", pAd->BeaconTxWI.MPDUtotalByteCount));
-
-	RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr9.word);
-	csr9.field.bBeaconGen = 0;
-	csr9.field.bTBTTEnable = 0;
-	csr9.field.bTsfTicking = 0;
-	RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr9.word);
-
-
-#ifdef RT2870
-	// move BEACON TXD and frame content to on-chip memory
-	ptr = (PUCHAR)&pAd->BeaconTxWI;
-	for (i=0; i<TXWI_SIZE; i+=2)  // 16-byte TXWI field
-	{
-		//UINT32 longptr =  *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
-		//RTMP_IO_WRITE32(pAd, HW_BEACON_BASE0 + i, longptr);
-		RTUSBMultiWrite(pAd, HW_BEACON_BASE0 + i, ptr, 2);
-		ptr += 2;
-	}
-
-	// start right after the 16-byte TXWI field
-	ptr = pAd->BeaconBuf;
-	for (i=0; i< pAd->BeaconTxWI.MPDUtotalByteCount; i+=2)
-	{
-		//UINT32 longptr =  *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
-		//RTMP_IO_WRITE32(pAd, HW_BEACON_BASE0 + TXWI_SIZE + i, longptr);
-		RTUSBMultiWrite(pAd, HW_BEACON_BASE0 + TXWI_SIZE + i, ptr, 2);
-		ptr +=2;
-	}
-#endif // RT2870 //
-
-	//
-	// For Wi-Fi faily generated beacons between participating stations.
-	// Set TBTT phase adaptive adjustment step to 8us (default 16us)
-	// don't change settings 2006-5- by Jerry
-	//RTMP_IO_WRITE32(pAd, TBTT_SYNC_CFG, 0x00001010);
-
-	// start sending BEACON
-	csr9.field.BeaconInterval = pAd->CommonCfg.BeaconPeriod << 4; // ASIC register in units of 1/16 TU
-	csr9.field.bTsfTicking = 1;
-	csr9.field.TsfSyncMode = 2; // sync TSF in IBSS mode
-	csr9.field.bTBTTEnable = 1;
-	csr9.field.bBeaconGen = 1;
-	RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr9.word);
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AsicSetEdcaParm(
-	IN PRTMP_ADAPTER pAd,
-	IN PEDCA_PARM	 pEdcaParm)
-{
-	EDCA_AC_CFG_STRUC   Ac0Cfg, Ac1Cfg, Ac2Cfg, Ac3Cfg;
-	AC_TXOP_CSR0_STRUC csr0;
-	AC_TXOP_CSR1_STRUC csr1;
-	AIFSN_CSR_STRUC    AifsnCsr;
-	CWMIN_CSR_STRUC    CwminCsr;
-	CWMAX_CSR_STRUC    CwmaxCsr;
-	int i;
-
-	Ac0Cfg.word = 0;
-	Ac1Cfg.word = 0;
-	Ac2Cfg.word = 0;
-	Ac3Cfg.word = 0;
-	if ((pEdcaParm == NULL) || (pEdcaParm->bValid == FALSE))
-	{
-		DBGPRINT(RT_DEBUG_TRACE,("AsicSetEdcaParm\n"));
-		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_WMM_INUSED);
-		for (i=0; i<MAX_LEN_OF_MAC_TABLE; i++)
-		{
-			if (pAd->MacTab.Content[i].ValidAsCLI || pAd->MacTab.Content[i].ValidAsApCli)
-				CLIENT_STATUS_CLEAR_FLAG(&pAd->MacTab.Content[i], fCLIENT_STATUS_WMM_CAPABLE);
-		}
-
-		//========================================================
-		//      MAC Register has a copy .
-		//========================================================
-//#ifndef WIFI_TEST
-		if( pAd->CommonCfg.bEnableTxBurst )
-		{
-			// For CWC test, change txop from 0x30 to 0x20 in TxBurst mode
-			Ac0Cfg.field.AcTxop = 0x20; // Suggest by John for TxBurst in HT Mode
-		}
-		else
-			Ac0Cfg.field.AcTxop = 0;	// QID_AC_BE
-//#else
-//		Ac0Cfg.field.AcTxop = 0;	// QID_AC_BE
-//#endif
-		Ac0Cfg.field.Cwmin = CW_MIN_IN_BITS;
-		Ac0Cfg.field.Cwmax = CW_MAX_IN_BITS;
-		Ac0Cfg.field.Aifsn = 2;
-		RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, Ac0Cfg.word);
-
-		Ac1Cfg.field.AcTxop = 0;	// QID_AC_BK
-		Ac1Cfg.field.Cwmin = CW_MIN_IN_BITS;
-		Ac1Cfg.field.Cwmax = CW_MAX_IN_BITS;
-		Ac1Cfg.field.Aifsn = 2;
-		RTMP_IO_WRITE32(pAd, EDCA_AC1_CFG, Ac1Cfg.word);
-
-		if (pAd->CommonCfg.PhyMode == PHY_11B)
-		{
-			Ac2Cfg.field.AcTxop = 192;	// AC_VI: 192*32us ~= 6ms
-			Ac3Cfg.field.AcTxop = 96;	// AC_VO: 96*32us  ~= 3ms
-		}
-		else
-		{
-			Ac2Cfg.field.AcTxop = 96;	// AC_VI: 96*32us ~= 3ms
-			Ac3Cfg.field.AcTxop = 48;	// AC_VO: 48*32us ~= 1.5ms
-		}
-		Ac2Cfg.field.Cwmin = CW_MIN_IN_BITS;
-		Ac2Cfg.field.Cwmax = CW_MAX_IN_BITS;
-		Ac2Cfg.field.Aifsn = 2;
-		RTMP_IO_WRITE32(pAd, EDCA_AC2_CFG, Ac2Cfg.word);
-		Ac3Cfg.field.Cwmin = CW_MIN_IN_BITS;
-		Ac3Cfg.field.Cwmax = CW_MAX_IN_BITS;
-		Ac3Cfg.field.Aifsn = 2;
-		RTMP_IO_WRITE32(pAd, EDCA_AC3_CFG, Ac3Cfg.word);
-
-		//========================================================
-		//      DMA Register has a copy too.
-		//========================================================
-		csr0.field.Ac0Txop = 0;		// QID_AC_BE
-		csr0.field.Ac1Txop = 0;		// QID_AC_BK
-		RTMP_IO_WRITE32(pAd, WMM_TXOP0_CFG, csr0.word);
-		if (pAd->CommonCfg.PhyMode == PHY_11B)
-		{
-			csr1.field.Ac2Txop = 192;		// AC_VI: 192*32us ~= 6ms
-			csr1.field.Ac3Txop = 96;		// AC_VO: 96*32us  ~= 3ms
-		}
-		else
-		{
-			csr1.field.Ac2Txop = 96;		// AC_VI: 96*32us ~= 3ms
-			csr1.field.Ac3Txop = 48;		// AC_VO: 48*32us ~= 1.5ms
-		}
-		RTMP_IO_WRITE32(pAd, WMM_TXOP1_CFG, csr1.word);
-
-		CwminCsr.word = 0;
-		CwminCsr.field.Cwmin0 = CW_MIN_IN_BITS;
-		CwminCsr.field.Cwmin1 = CW_MIN_IN_BITS;
-		CwminCsr.field.Cwmin2 = CW_MIN_IN_BITS;
-		CwminCsr.field.Cwmin3 = CW_MIN_IN_BITS;
-		RTMP_IO_WRITE32(pAd, WMM_CWMIN_CFG, CwminCsr.word);
-
-		CwmaxCsr.word = 0;
-		CwmaxCsr.field.Cwmax0 = CW_MAX_IN_BITS;
-		CwmaxCsr.field.Cwmax1 = CW_MAX_IN_BITS;
-		CwmaxCsr.field.Cwmax2 = CW_MAX_IN_BITS;
-		CwmaxCsr.field.Cwmax3 = CW_MAX_IN_BITS;
-		RTMP_IO_WRITE32(pAd, WMM_CWMAX_CFG, CwmaxCsr.word);
-
-		RTMP_IO_WRITE32(pAd, WMM_AIFSN_CFG, 0x00002222);
-
-		NdisZeroMemory(&pAd->CommonCfg.APEdcaParm, sizeof(EDCA_PARM));
-	}
-	else
-	{
-		OPSTATUS_SET_FLAG(pAd, fOP_STATUS_WMM_INUSED);
-		//========================================================
-		//      MAC Register has a copy.
-		//========================================================
-		//
-		// Modify Cwmin/Cwmax/Txop on queue[QID_AC_VI], Recommend by Jerry 2005/07/27
-		// To degrade our VIDO Queue's throughput for WiFi WMM S3T07 Issue.
-		//
-		//pEdcaParm->Txop[QID_AC_VI] = pEdcaParm->Txop[QID_AC_VI] * 7 / 10; // rt2860c need this
-
-		Ac0Cfg.field.AcTxop =  pEdcaParm->Txop[QID_AC_BE];
-		Ac0Cfg.field.Cwmin= pEdcaParm->Cwmin[QID_AC_BE];
-		Ac0Cfg.field.Cwmax = pEdcaParm->Cwmax[QID_AC_BE];
-		Ac0Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_BE]; //+1;
-
-		Ac1Cfg.field.AcTxop =  pEdcaParm->Txop[QID_AC_BK];
-		Ac1Cfg.field.Cwmin = pEdcaParm->Cwmin[QID_AC_BK]; //+2;
-		Ac1Cfg.field.Cwmax = pEdcaParm->Cwmax[QID_AC_BK];
-		Ac1Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_BK]; //+1;
-
-		Ac2Cfg.field.AcTxop = (pEdcaParm->Txop[QID_AC_VI] * 6) / 10;
-		Ac2Cfg.field.Cwmin = pEdcaParm->Cwmin[QID_AC_VI];
-		Ac2Cfg.field.Cwmax = pEdcaParm->Cwmax[QID_AC_VI];
-		Ac2Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_VI];
-#ifdef INF_AMAZON_SE
-#endif // INF_AMAZON_SE //
-
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			// Tuning for Wi-Fi WMM S06
-			if (pAd->CommonCfg.bWiFiTest &&
-				pEdcaParm->Aifsn[QID_AC_VI] == 10)
-				Ac2Cfg.field.Aifsn -= 1;
-
-			// Tuning for TGn Wi-Fi 5.2.32
-			// STA TestBed changes in this item: conexant legacy sta ==> broadcom 11n sta
-			if (STA_TGN_WIFI_ON(pAd) &&
-				pEdcaParm->Aifsn[QID_AC_VI] == 10)
-			{
-				Ac0Cfg.field.Aifsn = 3;
-				Ac2Cfg.field.AcTxop = 5;
-			}
-
-#ifdef RT30xx
-			if (pAd->RfIcType == RFIC_3020 || pAd->RfIcType == RFIC_2020)
-			{
-				// Tuning for WiFi WMM S3-T07: connexant legacy sta ==> broadcom 11n sta.
-				Ac2Cfg.field.Aifsn = 5;
-			}
-#endif // RT30xx //
-		}
-#endif // CONFIG_STA_SUPPORT //
-
-		Ac3Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_VO];
-		Ac3Cfg.field.Cwmin = pEdcaParm->Cwmin[QID_AC_VO];
-		Ac3Cfg.field.Cwmax = pEdcaParm->Cwmax[QID_AC_VO];
-		Ac3Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_VO];
-
-//#ifdef WIFI_TEST
-		if (pAd->CommonCfg.bWiFiTest)
-		{
-			if (Ac3Cfg.field.AcTxop == 102)
-			{
-			Ac0Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_BE] ? pEdcaParm->Txop[QID_AC_BE] : 10;
-				Ac0Cfg.field.Aifsn  = pEdcaParm->Aifsn[QID_AC_BE]-1; /* AIFSN must >= 1 */
-			Ac1Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_BK];
-				Ac1Cfg.field.Aifsn  = pEdcaParm->Aifsn[QID_AC_BK];
-			Ac2Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_VI];
-			} /* End of if */
-		}
-//#endif // WIFI_TEST //
-
-		RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, Ac0Cfg.word);
-		RTMP_IO_WRITE32(pAd, EDCA_AC1_CFG, Ac1Cfg.word);
-		RTMP_IO_WRITE32(pAd, EDCA_AC2_CFG, Ac2Cfg.word);
-		RTMP_IO_WRITE32(pAd, EDCA_AC3_CFG, Ac3Cfg.word);
-
-
-		//========================================================
-		//      DMA Register has a copy too.
-		//========================================================
-		csr0.field.Ac0Txop = Ac0Cfg.field.AcTxop;
-		csr0.field.Ac1Txop = Ac1Cfg.field.AcTxop;
-		RTMP_IO_WRITE32(pAd, WMM_TXOP0_CFG, csr0.word);
-
-		csr1.field.Ac2Txop = Ac2Cfg.field.AcTxop;
-		csr1.field.Ac3Txop = Ac3Cfg.field.AcTxop;
-		RTMP_IO_WRITE32(pAd, WMM_TXOP1_CFG, csr1.word);
-
-		CwminCsr.word = 0;
-		CwminCsr.field.Cwmin0 = pEdcaParm->Cwmin[QID_AC_BE];
-		CwminCsr.field.Cwmin1 = pEdcaParm->Cwmin[QID_AC_BK];
-		CwminCsr.field.Cwmin2 = pEdcaParm->Cwmin[QID_AC_VI];
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			CwminCsr.field.Cwmin3 = pEdcaParm->Cwmin[QID_AC_VO] - 1; //for TGn wifi test
-#endif // CONFIG_STA_SUPPORT //
-		RTMP_IO_WRITE32(pAd, WMM_CWMIN_CFG, CwminCsr.word);
-
-		CwmaxCsr.word = 0;
-		CwmaxCsr.field.Cwmax0 = pEdcaParm->Cwmax[QID_AC_BE];
-		CwmaxCsr.field.Cwmax1 = pEdcaParm->Cwmax[QID_AC_BK];
-		CwmaxCsr.field.Cwmax2 = pEdcaParm->Cwmax[QID_AC_VI];
-		CwmaxCsr.field.Cwmax3 = pEdcaParm->Cwmax[QID_AC_VO];
-		RTMP_IO_WRITE32(pAd, WMM_CWMAX_CFG, CwmaxCsr.word);
-
-		AifsnCsr.word = 0;
-		AifsnCsr.field.Aifsn0 = Ac0Cfg.field.Aifsn; //pEdcaParm->Aifsn[QID_AC_BE];
-		AifsnCsr.field.Aifsn1 = Ac1Cfg.field.Aifsn; //pEdcaParm->Aifsn[QID_AC_BK];
-		AifsnCsr.field.Aifsn2 = Ac2Cfg.field.Aifsn; //pEdcaParm->Aifsn[QID_AC_VI];
-#ifdef INF_AMAZON_SE
-#endif // INF_AMAZON_SE //
-
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			// Tuning for Wi-Fi WMM S06
-			if (pAd->CommonCfg.bWiFiTest &&
-				pEdcaParm->Aifsn[QID_AC_VI] == 10)
-				AifsnCsr.field.Aifsn2 = Ac2Cfg.field.Aifsn - 4;
-
-			// Tuning for TGn Wi-Fi 5.2.32
-			// STA TestBed changes in this item: connexant legacy sta ==> broadcom 11n sta
-			if (STA_TGN_WIFI_ON(pAd) &&
-				pEdcaParm->Aifsn[QID_AC_VI] == 10)
-			{
-				AifsnCsr.field.Aifsn0 = 3;
-				AifsnCsr.field.Aifsn2 = 7;
-			}
-
-			if (INFRA_ON(pAd))
-				CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[BSSID_WCID], fCLIENT_STATUS_WMM_CAPABLE);
-		}
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			AifsnCsr.field.Aifsn3 = Ac3Cfg.field.Aifsn - 1; //pEdcaParm->Aifsn[QID_AC_VO]; //for TGn wifi test
-#ifdef RT30xx
-		if (pAd->RfIcType == RFIC_3020 || pAd->RfIcType == RFIC_2020)
-		{
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			AifsnCsr.field.Aifsn2 = 0x2; //pEdcaParm->Aifsn[QID_AC_VI]; //for WiFi WMM S4-T04.
-		}
-#endif // RT30xx //
-#endif // CONFIG_STA_SUPPORT //
-		RTMP_IO_WRITE32(pAd, WMM_AIFSN_CFG, AifsnCsr.word);
-
-		NdisMoveMemory(&pAd->CommonCfg.APEdcaParm, pEdcaParm, sizeof(EDCA_PARM));
-		if (!ADHOC_ON(pAd))
-		{
-			DBGPRINT(RT_DEBUG_TRACE,("EDCA [#%d]: AIFSN CWmin CWmax  TXOP(us)  ACM\n", pEdcaParm->EdcaUpdateCount));
-			DBGPRINT(RT_DEBUG_TRACE,("     AC_BE      %2d     %2d     %2d      %4d     %d\n",
-									 pEdcaParm->Aifsn[0],
-									 pEdcaParm->Cwmin[0],
-									 pEdcaParm->Cwmax[0],
-									 pEdcaParm->Txop[0]<<5,
-									 pEdcaParm->bACM[0]));
-			DBGPRINT(RT_DEBUG_TRACE,("     AC_BK      %2d     %2d     %2d      %4d     %d\n",
-									 pEdcaParm->Aifsn[1],
-									 pEdcaParm->Cwmin[1],
-									 pEdcaParm->Cwmax[1],
-									 pEdcaParm->Txop[1]<<5,
-									 pEdcaParm->bACM[1]));
-			DBGPRINT(RT_DEBUG_TRACE,("     AC_VI      %2d     %2d     %2d      %4d     %d\n",
-									 pEdcaParm->Aifsn[2],
-									 pEdcaParm->Cwmin[2],
-									 pEdcaParm->Cwmax[2],
-									 pEdcaParm->Txop[2]<<5,
-									 pEdcaParm->bACM[2]));
-			DBGPRINT(RT_DEBUG_TRACE,("     AC_VO      %2d     %2d     %2d      %4d     %d\n",
-									 pEdcaParm->Aifsn[3],
-									 pEdcaParm->Cwmin[3],
-									 pEdcaParm->Cwmax[3],
-									 pEdcaParm->Txop[3]<<5,
-									 pEdcaParm->bACM[3]));
-		}
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID 	AsicSetSlotTime(
-	IN PRTMP_ADAPTER pAd,
-	IN BOOLEAN bUseShortSlotTime)
-{
-	ULONG	SlotTime;
-	UINT32	RegValue = 0;
-
-#ifdef CONFIG_STA_SUPPORT
-	if (pAd->CommonCfg.Channel > 14)
-		bUseShortSlotTime = TRUE;
-#endif // CONFIG_STA_SUPPORT //
-
-	if (bUseShortSlotTime)
-		OPSTATUS_SET_FLAG(pAd, fOP_STATUS_SHORT_SLOT_INUSED);
-	else
-		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_SLOT_INUSED);
-
-	SlotTime = (bUseShortSlotTime)? 9 : 20;
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// force using short SLOT time for FAE to demo performance when TxBurst is ON
-		if (pAd->CommonCfg.bEnableTxBurst)
-			SlotTime = 9;
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	//
-	// For some reasons, always set it to short slot time.
-	//
-	// ToDo: Should consider capability with 11B
-	//
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if (pAd->StaCfg.BssType == BSS_ADHOC)
-			SlotTime = 20;
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	RTMP_IO_READ32(pAd, BKOFF_SLOT_CFG, &RegValue);
-	RegValue = RegValue & 0xFFFFFF00;
-
-	RegValue |= SlotTime;
-
-	RTMP_IO_WRITE32(pAd, BKOFF_SLOT_CFG, RegValue);
-}
-
-/*
-	========================================================================
-	Description:
-		Add Shared key information into ASIC.
-		Update shared key, TxMic and RxMic to Asic Shared key table
-		Update its cipherAlg to Asic Shared key Mode.
-
-    Return:
-	========================================================================
-*/
-VOID AsicAddSharedKeyEntry(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR		 BssIndex,
-	IN UCHAR		 KeyIdx,
-	IN UCHAR		 CipherAlg,
-	IN PUCHAR		 pKey,
-	IN PUCHAR		 pTxMic,
-	IN PUCHAR		 pRxMic)
-{
-	ULONG offset; //, csr0;
-	SHAREDKEY_MODE_STRUC csr1;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("AsicAddSharedKeyEntry BssIndex=%d, KeyIdx=%d\n", BssIndex,KeyIdx));
-//============================================================================================
-
-	DBGPRINT(RT_DEBUG_TRACE,("AsicAddSharedKeyEntry: %s key #%d\n", CipherName[CipherAlg], BssIndex*4 + KeyIdx));
-	DBGPRINT_RAW(RT_DEBUG_TRACE, (" 	Key = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
-		pKey[0],pKey[1],pKey[2],pKey[3],pKey[4],pKey[5],pKey[6],pKey[7],pKey[8],pKey[9],pKey[10],pKey[11],pKey[12],pKey[13],pKey[14],pKey[15]));
-	if (pRxMic)
-	{
-		DBGPRINT_RAW(RT_DEBUG_TRACE, (" 	Rx MIC Key = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
-			pRxMic[0],pRxMic[1],pRxMic[2],pRxMic[3],pRxMic[4],pRxMic[5],pRxMic[6],pRxMic[7]));
-	}
-	if (pTxMic)
-	{
-		DBGPRINT_RAW(RT_DEBUG_TRACE, (" 	Tx MIC Key = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
-			pTxMic[0],pTxMic[1],pTxMic[2],pTxMic[3],pTxMic[4],pTxMic[5],pTxMic[6],pTxMic[7]));
-	}
-//============================================================================================
-	//
-	// fill key material - key + TX MIC + RX MIC
-	//
-
-#ifdef RT2870
-{
-	offset = SHARED_KEY_TABLE_BASE + (4*BssIndex + KeyIdx)*HW_KEY_ENTRY_SIZE;
-	RTUSBMultiWrite(pAd, offset, pKey, MAX_LEN_OF_SHARE_KEY);
-
-	offset += MAX_LEN_OF_SHARE_KEY;
-	if (pTxMic)
-	{
-		RTUSBMultiWrite(pAd, offset, pTxMic, 8);
-	}
-
-	offset += 8;
-	if (pRxMic)
-	{
-		RTUSBMultiWrite(pAd, offset, pRxMic, 8);
-	}
-}
-#endif // RT2870 //
-
-	//
-	// Update cipher algorithm. WSTA always use BSS0
-	//
-	RTMP_IO_READ32(pAd, SHARED_KEY_MODE_BASE+4*(BssIndex/2), &csr1.word);
-	DBGPRINT(RT_DEBUG_TRACE,("Read: SHARED_KEY_MODE_BASE at this Bss[%d] KeyIdx[%d]= 0x%x \n", BssIndex,KeyIdx, csr1.word));
-	if ((BssIndex%2) == 0)
-	{
-		if (KeyIdx == 0)
-			csr1.field.Bss0Key0CipherAlg = CipherAlg;
-		else if (KeyIdx == 1)
-			csr1.field.Bss0Key1CipherAlg = CipherAlg;
-		else if (KeyIdx == 2)
-			csr1.field.Bss0Key2CipherAlg = CipherAlg;
-		else
-			csr1.field.Bss0Key3CipherAlg = CipherAlg;
-	}
-	else
-	{
-		if (KeyIdx == 0)
-			csr1.field.Bss1Key0CipherAlg = CipherAlg;
-		else if (KeyIdx == 1)
-			csr1.field.Bss1Key1CipherAlg = CipherAlg;
-		else if (KeyIdx == 2)
-			csr1.field.Bss1Key2CipherAlg = CipherAlg;
-		else
-			csr1.field.Bss1Key3CipherAlg = CipherAlg;
-	}
-	DBGPRINT(RT_DEBUG_TRACE,("Write: SHARED_KEY_MODE_BASE at this Bss[%d] = 0x%x \n", BssIndex, csr1.word));
-	RTMP_IO_WRITE32(pAd, SHARED_KEY_MODE_BASE+4*(BssIndex/2), csr1.word);
-
-}
-
-//	IRQL = DISPATCH_LEVEL
-VOID AsicRemoveSharedKeyEntry(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR		 BssIndex,
-	IN UCHAR		 KeyIdx)
-{
-	//ULONG SecCsr0;
-	SHAREDKEY_MODE_STRUC csr1;
-
-	DBGPRINT(RT_DEBUG_TRACE,("AsicRemoveSharedKeyEntry: #%d \n", BssIndex*4 + KeyIdx));
-
-	RTMP_IO_READ32(pAd, SHARED_KEY_MODE_BASE+4*(BssIndex/2), &csr1.word);
-	if ((BssIndex%2) == 0)
-	{
-		if (KeyIdx == 0)
-			csr1.field.Bss0Key0CipherAlg = 0;
-		else if (KeyIdx == 1)
-			csr1.field.Bss0Key1CipherAlg = 0;
-		else if (KeyIdx == 2)
-			csr1.field.Bss0Key2CipherAlg = 0;
-		else
-			csr1.field.Bss0Key3CipherAlg = 0;
-	}
-	else
-	{
-		if (KeyIdx == 0)
-			csr1.field.Bss1Key0CipherAlg = 0;
-		else if (KeyIdx == 1)
-			csr1.field.Bss1Key1CipherAlg = 0;
-		else if (KeyIdx == 2)
-			csr1.field.Bss1Key2CipherAlg = 0;
-		else
-			csr1.field.Bss1Key3CipherAlg = 0;
-	}
-	DBGPRINT(RT_DEBUG_TRACE,("Write: SHARED_KEY_MODE_BASE at this Bss[%d] = 0x%x \n", BssIndex, csr1.word));
-	RTMP_IO_WRITE32(pAd, SHARED_KEY_MODE_BASE+4*(BssIndex/2), csr1.word);
-	ASSERT(BssIndex < 4);
-	ASSERT(KeyIdx < 4);
-
-}
-
-
-VOID AsicUpdateWCIDAttribute(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT		WCID,
-	IN UCHAR		BssIndex,
-	IN UCHAR        CipherAlg,
-	IN BOOLEAN		bUsePairewiseKeyTable)
-{
-	ULONG   WCIDAttri = 0, offset;
-
-	//
-	// Update WCID attribute.
-	// Only TxKey could update WCID attribute.
-	//
-	offset = MAC_WCID_ATTRIBUTE_BASE + (WCID * HW_WCID_ATTRI_SIZE);
-	WCIDAttri = (BssIndex << 4) | (CipherAlg << 1) | (bUsePairewiseKeyTable);
-	RTMP_IO_WRITE32(pAd, offset, WCIDAttri);
-}
-
-VOID AsicUpdateWCIDIVEIV(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT		WCID,
-	IN ULONG        uIV,
-	IN ULONG        uEIV)
-{
-	ULONG	offset;
-
-	offset = MAC_IVEIV_TABLE_BASE + (WCID * HW_IVEIV_ENTRY_SIZE);
-
-	RTMP_IO_WRITE32(pAd, offset, uIV);
-	RTMP_IO_WRITE32(pAd, offset + 4, uEIV);
-}
-
-VOID AsicUpdateRxWCIDTable(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT		WCID,
-	IN PUCHAR        pAddr)
-{
-	ULONG offset;
-	ULONG Addr;
-
-	offset = MAC_WCID_BASE + (WCID * HW_WCID_ENTRY_SIZE);
-	Addr = pAddr[0] + (pAddr[1] << 8) +(pAddr[2] << 16) +(pAddr[3] << 24);
-	RTMP_IO_WRITE32(pAd, offset, Addr);
-	Addr = pAddr[4] + (pAddr[5] << 8);
-	RTMP_IO_WRITE32(pAd, offset + 4, Addr);
-}
-
-
-/*
-    ========================================================================
-
-    Routine Description:
-        Set Cipher Key, Cipher algorithm, IV/EIV to Asic
-
-    Arguments:
-        pAd                     Pointer to our adapter
-        WCID                    WCID Entry number.
-        BssIndex                BSSID index, station or none multiple BSSID support
-                                this value should be 0.
-        KeyIdx                  This KeyIdx will set to IV's KeyID if bTxKey enabled
-        pCipherKey              Pointer to Cipher Key.
-        bUsePairewiseKeyTable   TRUE means saved the key in SharedKey table,
-                                otherwise PairewiseKey table
-        bTxKey                  This is the transmit key if enabled.
-
-    Return Value:
-        None
-
-    Note:
-        This routine will set the relative key stuff to Asic including WCID attribute,
-        Cipher Key, Cipher algorithm and IV/EIV.
-
-        IV/EIV will be update if this CipherKey is the transmission key because
-        ASIC will base on IV's KeyID value to select Cipher Key.
-
-        If bTxKey sets to FALSE, this is not the TX key, but it could be
-        RX key
-
-    	For AP mode bTxKey must be always set to TRUE.
-    ========================================================================
-*/
-VOID AsicAddKeyEntry(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT		WCID,
-	IN UCHAR		BssIndex,
-	IN UCHAR		KeyIdx,
-	IN PCIPHER_KEY	pCipherKey,
-	IN BOOLEAN		bUsePairewiseKeyTable,
-	IN BOOLEAN		bTxKey)
-{
-	ULONG	offset;
-//	ULONG   WCIDAttri = 0;
-	UCHAR	IV4 = 0;
-	PUCHAR		pKey = pCipherKey->Key;
-//	ULONG		KeyLen = pCipherKey->KeyLen;
-	PUCHAR		pTxMic = pCipherKey->TxMic;
-	PUCHAR		pRxMic = pCipherKey->RxMic;
-	PUCHAR		pTxtsc = pCipherKey->TxTsc;
-	UCHAR		CipherAlg = pCipherKey->CipherAlg;
-	SHAREDKEY_MODE_STRUC csr1;
-
-//	ASSERT(KeyLen <= MAX_LEN_OF_PEER_KEY);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("==> AsicAddKeyEntry\n"));
-	//
-	// 1.) decide key table offset
-	//
-	if (bUsePairewiseKeyTable)
-		offset = PAIRWISE_KEY_TABLE_BASE + (WCID * HW_KEY_ENTRY_SIZE);
-	else
-		offset = SHARED_KEY_TABLE_BASE + (4 * BssIndex + KeyIdx) * HW_KEY_ENTRY_SIZE;
-
-	//
-	// 2.) Set Key to Asic
-	//
-	//for (i = 0; i < KeyLen; i++)
-
-#ifdef RT2870
-	RTUSBMultiWrite(pAd, offset, pKey, MAX_LEN_OF_PEER_KEY);
-	offset += MAX_LEN_OF_PEER_KEY;
-
-	//
-	// 3.) Set MIC key if available
-	//
-	if (pTxMic)
-	{
-		RTUSBMultiWrite(pAd, offset, pTxMic, 8);
-	}
-	offset += LEN_TKIP_TXMICK;
-
-	if (pRxMic)
-	{
-		RTUSBMultiWrite(pAd, offset, pRxMic, 8);
-	}
-#endif // RT2870 //
-
-	//
-	// 4.) Modify IV/EIV if needs
-	//     This will force Asic to use this key ID by setting IV.
-	//
-	if (bTxKey)
-	{
-
-#ifdef RT2870
-		UINT32 tmpVal;
-
-		//
-		// Write IV
-		//
-		IV4 = (KeyIdx << 6);
-		if ((CipherAlg == CIPHER_TKIP) || (CipherAlg == CIPHER_TKIP_NO_MIC) ||(CipherAlg == CIPHER_AES))
-			IV4 |= 0x20;  // turn on extension bit means EIV existence
-
-		tmpVal = pTxtsc[1] + (((pTxtsc[1] | 0x20) & 0x7f) << 8) + (pTxtsc[0] << 16) + (IV4 << 24);
-		RTMP_IO_WRITE32(pAd, offset, tmpVal);
-
-		//
-		// Write EIV
-		//
-		offset += 4;
-		RTMP_IO_WRITE32(pAd, offset, *(PUINT32)&pCipherKey->TxTsc[2]);
-#endif // RT2870 //
-		AsicUpdateWCIDAttribute(pAd, WCID, BssIndex, CipherAlg, bUsePairewiseKeyTable);
-	}
-
-	if (!bUsePairewiseKeyTable)
-	{
-		//
-		// Only update the shared key security mode
-		//
-		RTMP_IO_READ32(pAd, SHARED_KEY_MODE_BASE + 4 * (BssIndex / 2), &csr1.word);
-		if ((BssIndex % 2) == 0)
-		{
-			if (KeyIdx == 0)
-				csr1.field.Bss0Key0CipherAlg = CipherAlg;
-			else if (KeyIdx == 1)
-				csr1.field.Bss0Key1CipherAlg = CipherAlg;
-			else if (KeyIdx == 2)
-				csr1.field.Bss0Key2CipherAlg = CipherAlg;
-			else
-				csr1.field.Bss0Key3CipherAlg = CipherAlg;
-		}
-		else
-		{
-			if (KeyIdx == 0)
-				csr1.field.Bss1Key0CipherAlg = CipherAlg;
-			else if (KeyIdx == 1)
-				csr1.field.Bss1Key1CipherAlg = CipherAlg;
-			else if (KeyIdx == 2)
-				csr1.field.Bss1Key2CipherAlg = CipherAlg;
-			else
-				csr1.field.Bss1Key3CipherAlg = CipherAlg;
-		}
-		RTMP_IO_WRITE32(pAd, SHARED_KEY_MODE_BASE + 4 * (BssIndex / 2), csr1.word);
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<== AsicAddKeyEntry\n"));
-}
-
-
-/*
-	========================================================================
-	Description:
-		Add Pair-wise key material into ASIC.
-		Update pairwise key, TxMic and RxMic to Asic Pair-wise key table
-
-    Return:
-	========================================================================
-*/
-VOID AsicAddPairwiseKeyEntry(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR        pAddr,
-	IN UCHAR		WCID,
-	IN CIPHER_KEY		 *pCipherKey)
-{
-	INT i;
-	ULONG 		offset;
-	PUCHAR		 pKey = pCipherKey->Key;
-	PUCHAR		 pTxMic = pCipherKey->TxMic;
-	PUCHAR		 pRxMic = pCipherKey->RxMic;
-#ifdef DBG
-	UCHAR		CipherAlg = pCipherKey->CipherAlg;
-#endif // DBG //
-
-	// EKEY
-	offset = PAIRWISE_KEY_TABLE_BASE + (WCID * HW_KEY_ENTRY_SIZE);
-#ifdef RT2870
-	RTUSBMultiWrite(pAd, offset, &pCipherKey->Key[0], MAX_LEN_OF_PEER_KEY);
-#endif // RT2870 //
-	for (i=0; i<MAX_LEN_OF_PEER_KEY; i+=4)
-	{
-		UINT32 Value;
-		RTMP_IO_READ32(pAd, offset + i, &Value);
-	}
-
-	offset += MAX_LEN_OF_PEER_KEY;
-
-	//  MIC KEY
-	if (pTxMic)
-	{
-#ifdef RT2870
-		RTUSBMultiWrite(pAd, offset, &pCipherKey->TxMic[0], 8);
-#endif // RT2870 //
-	}
-	offset += 8;
-	if (pRxMic)
-	{
-#ifdef RT2870
-		RTUSBMultiWrite(pAd, offset, &pCipherKey->RxMic[0], 8);
-#endif // RT2870 //
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE,("AsicAddPairwiseKeyEntry: WCID #%d Alg=%s\n",WCID, CipherName[CipherAlg]));
-	DBGPRINT(RT_DEBUG_TRACE,("	Key = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
-		pKey[0],pKey[1],pKey[2],pKey[3],pKey[4],pKey[5],pKey[6],pKey[7],pKey[8],pKey[9],pKey[10],pKey[11],pKey[12],pKey[13],pKey[14],pKey[15]));
-	if (pRxMic)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("	Rx MIC Key = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
-			pRxMic[0],pRxMic[1],pRxMic[2],pRxMic[3],pRxMic[4],pRxMic[5],pRxMic[6],pRxMic[7]));
-	}
-	if (pTxMic)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("	Tx MIC Key = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
-			pTxMic[0],pTxMic[1],pTxMic[2],pTxMic[3],pTxMic[4],pTxMic[5],pTxMic[6],pTxMic[7]));
-	}
-}
-/*
-	========================================================================
-	Description:
-		Remove Pair-wise key material from ASIC.
-
-    Return:
-	========================================================================
-*/
-VOID AsicRemovePairwiseKeyEntry(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR		 BssIdx,
-	IN UCHAR		 Wcid)
-{
-	ULONG		WCIDAttri;
-	USHORT		offset;
-
-	// re-set the entry's WCID attribute as OPEN-NONE.
-	offset = MAC_WCID_ATTRIBUTE_BASE + (Wcid * HW_WCID_ATTRI_SIZE);
-	WCIDAttri = (BssIdx<<4) | PAIRWISEKEYTABLE;
-	RTMP_IO_WRITE32(pAd, offset, WCIDAttri);
-}
-
-BOOLEAN AsicSendCommandToMcu(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR		 Command,
-	IN UCHAR		 Token,
-	IN UCHAR		 Arg0,
-	IN UCHAR		 Arg1)
-{
-	HOST_CMD_CSR_STRUC	H2MCmd;
-	H2M_MAILBOX_STRUC	H2MMailbox;
-	ULONG				i = 0;
-	do
-	{
-		RTMP_IO_READ32(pAd, H2M_MAILBOX_CSR, &H2MMailbox.word);
-		if (H2MMailbox.field.Owner == 0)
-			break;
-
-		RTMPusecDelay(2);
-	} while(i++ < 100);
-
-	if (i >= 100)
-	{
-		{
-		DBGPRINT_ERR(("H2M_MAILBOX still hold by MCU. command fail\n"));
-		}
-		return FALSE;
-	}
-
-
-	H2MMailbox.field.Owner	  = 1;	   // pass ownership to MCU
-	H2MMailbox.field.CmdToken = Token;
-	H2MMailbox.field.HighByte = Arg1;
-	H2MMailbox.field.LowByte  = Arg0;
-	RTMP_IO_WRITE32(pAd, H2M_MAILBOX_CSR, H2MMailbox.word);
-
-	H2MCmd.word 			  = 0;
-	H2MCmd.field.HostCommand  = Command;
-	RTMP_IO_WRITE32(pAd, HOST_CMD_CSR, H2MCmd.word);
-
-	if (Command != 0x80)
-	{
-	}
-
-	return TRUE;
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Verify the support rate for different PHY type
-
-	Arguments:
-		pAd 				Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-
-	========================================================================
-*/
-VOID	RTMPCheckRates(
-	IN		PRTMP_ADAPTER	pAd,
-	IN OUT	UCHAR			SupRate[],
-	IN OUT	UCHAR			*SupRateLen)
-{
-	UCHAR	RateIdx, i, j;
-	UCHAR	NewRate[12], NewRateLen;
-
-	NewRateLen = 0;
-
-	if (pAd->CommonCfg.PhyMode == PHY_11B)
-		RateIdx = 4;
-	else
-		RateIdx = 12;
-
-	// Check for support rates exclude basic rate bit
-	for (i = 0; i < *SupRateLen; i++)
-		for (j = 0; j < RateIdx; j++)
-			if ((SupRate[i] & 0x7f) == RateIdTo500Kbps[j])
-				NewRate[NewRateLen++] = SupRate[i];
-
-	*SupRateLen = NewRateLen;
-	NdisMoveMemory(SupRate, NewRate, NewRateLen);
-}
-
-#ifdef CONFIG_STA_SUPPORT
-#ifdef DOT11_N_SUPPORT
-BOOLEAN RTMPCheckChannel(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR		CentralChannel,
-	IN UCHAR		Channel)
-{
-	UCHAR		k;
-	UCHAR		UpperChannel = 0, LowerChannel = 0;
-	UCHAR		NoEffectChannelinList = 0;
-
-	// Find upper and lower channel according to 40MHz current operation.
-	if (CentralChannel < Channel)
-	{
-		UpperChannel = Channel;
-		if (CentralChannel > 2)
-			LowerChannel = CentralChannel - 2;
-		else
-			return FALSE;
-	}
-	else if (CentralChannel > Channel)
-	{
-		UpperChannel = CentralChannel + 2;
-		LowerChannel = Channel;
-	}
-
-	for (k = 0;k < pAd->ChannelListNum;k++)
-	{
-		if (pAd->ChannelList[k].Channel == UpperChannel)
-		{
-			NoEffectChannelinList ++;
-		}
-		if (pAd->ChannelList[k].Channel == LowerChannel)
-		{
-			NoEffectChannelinList ++;
-		}
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE,("Total Channel in Channel List = [%d]\n", NoEffectChannelinList));
-	if (NoEffectChannelinList == 2)
-		return TRUE;
-	else
-		return FALSE;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Verify the support rate for HT phy type
-
-	Arguments:
-		pAd 				Pointer to our adapter
-
-	Return Value:
-		FALSE if pAd->CommonCfg.SupportedHtPhy doesn't accept the pHtCapability.  (AP Mode)
-
-	IRQL = PASSIVE_LEVEL
-
-	========================================================================
-*/
-BOOLEAN 	RTMPCheckHt(
-	IN	PRTMP_ADAPTER			pAd,
-	IN	UCHAR					Wcid,
-	IN 	HT_CAPABILITY_IE		*pHtCapability,
-	IN 	ADD_HT_INFO_IE			*pAddHtInfo)
-{
-	if (Wcid >= MAX_LEN_OF_MAC_TABLE)
-		return FALSE;
-
-	// If use AMSDU, set flag.
-	if (pAd->CommonCfg.DesiredHtPhy.AmsduEnable)
-		CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[Wcid], fCLIENT_STATUS_AMSDU_INUSED);
-	// Save Peer Capability
-	if (pHtCapability->HtCapInfo.ShortGIfor20)
-		CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[Wcid], fCLIENT_STATUS_SGI20_CAPABLE);
-	if (pHtCapability->HtCapInfo.ShortGIfor40)
-		CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[Wcid], fCLIENT_STATUS_SGI40_CAPABLE);
-	if (pHtCapability->HtCapInfo.TxSTBC)
-		CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[Wcid], fCLIENT_STATUS_TxSTBC_CAPABLE);
-	if (pHtCapability->HtCapInfo.RxSTBC)
-		CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[Wcid], fCLIENT_STATUS_RxSTBC_CAPABLE);
-	if (pAd->CommonCfg.bRdg && pHtCapability->ExtHtCapInfo.RDGSupport)
-	{
-		CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[Wcid], fCLIENT_STATUS_RDG_CAPABLE);
-	}
-
-	if (Wcid < MAX_LEN_OF_MAC_TABLE)
-	{
-		pAd->MacTab.Content[Wcid].MpduDensity = pHtCapability->HtCapParm.MpduDensity;
-	}
-
-	// Will check ChannelWidth for MCSSet[4] below
-	pAd->MlmeAux.HtCapability.MCSSet[4] = 0x1;
-    switch (pAd->CommonCfg.RxStream)
-	{
-		case 1:
-			pAd->MlmeAux.HtCapability.MCSSet[0] = 0xff;
-			pAd->MlmeAux.HtCapability.MCSSet[1] = 0x00;
-            pAd->MlmeAux.HtCapability.MCSSet[2] = 0x00;
-            pAd->MlmeAux.HtCapability.MCSSet[3] = 0x00;
-			break;
-		case 2:
-			pAd->MlmeAux.HtCapability.MCSSet[0] = 0xff;
-			pAd->MlmeAux.HtCapability.MCSSet[1] = 0xff;
-            pAd->MlmeAux.HtCapability.MCSSet[2] = 0x00;
-            pAd->MlmeAux.HtCapability.MCSSet[3] = 0x00;
-			break;
-		case 3:
-			pAd->MlmeAux.HtCapability.MCSSet[0] = 0xff;
-			pAd->MlmeAux.HtCapability.MCSSet[1] = 0xff;
-            pAd->MlmeAux.HtCapability.MCSSet[2] = 0xff;
-            pAd->MlmeAux.HtCapability.MCSSet[3] = 0x00;
-			break;
-	}
-
-	pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth = pAddHtInfo->AddHtInfo.RecomWidth & pAd->CommonCfg.DesiredHtPhy.ChannelWidth;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("RTMPCheckHt:: HtCapInfo.ChannelWidth=%d, RecomWidth=%d, DesiredHtPhy.ChannelWidth=%d, BW40MAvailForA/G=%d/%d, PhyMode=%d \n",
-		pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth, pAddHtInfo->AddHtInfo.RecomWidth, pAd->CommonCfg.DesiredHtPhy.ChannelWidth,
-		pAd->NicConfig2.field.BW40MAvailForA, pAd->NicConfig2.field.BW40MAvailForG, pAd->CommonCfg.PhyMode));
-
-	pAd->MlmeAux.HtCapability.HtCapInfo.GF =  pHtCapability->HtCapInfo.GF &pAd->CommonCfg.DesiredHtPhy.GF;
-
-	// Send Assoc Req with my HT capability.
-	pAd->MlmeAux.HtCapability.HtCapInfo.AMsduSize =  pAd->CommonCfg.DesiredHtPhy.AmsduSize;
-	pAd->MlmeAux.HtCapability.HtCapInfo.MimoPs =  pAd->CommonCfg.DesiredHtPhy.MimoPs;
-	pAd->MlmeAux.HtCapability.HtCapInfo.ShortGIfor20 =  (pAd->CommonCfg.DesiredHtPhy.ShortGIfor20) & (pHtCapability->HtCapInfo.ShortGIfor20);
-	pAd->MlmeAux.HtCapability.HtCapInfo.ShortGIfor40 =  (pAd->CommonCfg.DesiredHtPhy.ShortGIfor40) & (pHtCapability->HtCapInfo.ShortGIfor40);
-	pAd->MlmeAux.HtCapability.HtCapInfo.TxSTBC =  (pAd->CommonCfg.DesiredHtPhy.TxSTBC)&(pHtCapability->HtCapInfo.RxSTBC);
-	pAd->MlmeAux.HtCapability.HtCapInfo.RxSTBC =  (pAd->CommonCfg.DesiredHtPhy.RxSTBC)&(pHtCapability->HtCapInfo.TxSTBC);
-	pAd->MlmeAux.HtCapability.HtCapParm.MaxRAmpduFactor = pAd->CommonCfg.DesiredHtPhy.MaxRAmpduFactor;
-    pAd->MlmeAux.HtCapability.HtCapParm.MpduDensity = pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity;
-	pAd->MlmeAux.HtCapability.ExtHtCapInfo.PlusHTC = pHtCapability->ExtHtCapInfo.PlusHTC;
-	pAd->MacTab.Content[Wcid].HTCapability.ExtHtCapInfo.PlusHTC = pHtCapability->ExtHtCapInfo.PlusHTC;
-	if (pAd->CommonCfg.bRdg)
-	{
-		pAd->MlmeAux.HtCapability.ExtHtCapInfo.RDGSupport = pHtCapability->ExtHtCapInfo.RDGSupport;
-        pAd->MlmeAux.HtCapability.ExtHtCapInfo.PlusHTC = 1;
-	}
-
-    if (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_20)
-        pAd->MlmeAux.HtCapability.MCSSet[4] = 0x0;  // BW20 can't transmit MCS32
-
-	COPY_AP_HTSETTINGS_FROM_BEACON(pAd, pHtCapability);
-	return TRUE;
-}
-#endif // DOT11_N_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
-/*
-	========================================================================
-
-	Routine Description:
-		Verify the support rate for different PHY type
-
-	Arguments:
-		pAd 				Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-
-	========================================================================
-*/
-VOID RTMPUpdateMlmeRate(
-	IN PRTMP_ADAPTER	pAd)
-{
-	UCHAR	MinimumRate;
-	UCHAR	ProperMlmeRate; //= RATE_54;
-	UCHAR	i, j, RateIdx = 12; //1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
-	BOOLEAN	bMatch = FALSE;
-
-	switch (pAd->CommonCfg.PhyMode)
-	{
-		case PHY_11B:
-			ProperMlmeRate = RATE_11;
-			MinimumRate = RATE_1;
-			break;
-		case PHY_11BG_MIXED:
-#ifdef DOT11_N_SUPPORT
-		case PHY_11ABGN_MIXED:
-		case PHY_11BGN_MIXED:
-#endif // DOT11_N_SUPPORT //
-			if ((pAd->MlmeAux.SupRateLen == 4) &&
-				(pAd->MlmeAux.ExtRateLen == 0))
-				// B only AP
-				ProperMlmeRate = RATE_11;
-			else
-				ProperMlmeRate = RATE_24;
-
-			if (pAd->MlmeAux.Channel <= 14)
-				MinimumRate = RATE_1;
-			else
-				MinimumRate = RATE_6;
-			break;
-		case PHY_11A:
-#ifdef DOT11_N_SUPPORT
-		case PHY_11N_2_4G:	// rt2860 need to check mlmerate for 802.11n
-		case PHY_11GN_MIXED:
-		case PHY_11AGN_MIXED:
-		case PHY_11AN_MIXED:
-		case PHY_11N_5G:
-#endif // DOT11_N_SUPPORT //
-			ProperMlmeRate = RATE_24;
-			MinimumRate = RATE_6;
-			break;
-		case PHY_11ABG_MIXED:
-			ProperMlmeRate = RATE_24;
-			if (pAd->MlmeAux.Channel <= 14)
-			   MinimumRate = RATE_1;
-			else
-				MinimumRate = RATE_6;
-			break;
-		default: // error
-			ProperMlmeRate = RATE_1;
-			MinimumRate = RATE_1;
-			break;
-	}
-
-	for (i = 0; i < pAd->MlmeAux.SupRateLen; i++)
-	{
-		for (j = 0; j < RateIdx; j++)
-		{
-			if ((pAd->MlmeAux.SupRate[i] & 0x7f) == RateIdTo500Kbps[j])
-			{
-				if (j == ProperMlmeRate)
-				{
-					bMatch = TRUE;
-					break;
-				}
-			}
-		}
-
-		if (bMatch)
-			break;
-	}
-
-	if (bMatch == FALSE)
-	{
-		for (i = 0; i < pAd->MlmeAux.ExtRateLen; i++)
-		{
-			for (j = 0; j < RateIdx; j++)
-			{
-				if ((pAd->MlmeAux.ExtRate[i] & 0x7f) == RateIdTo500Kbps[j])
-				{
-					if (j == ProperMlmeRate)
-					{
-						bMatch = TRUE;
-						break;
-					}
-				}
-			}
-
-			if (bMatch)
-				break;
-		}
-	}
-
-	if (bMatch == FALSE)
-	{
-		ProperMlmeRate = MinimumRate;
-	}
-
-	pAd->CommonCfg.MlmeRate = MinimumRate;
-	pAd->CommonCfg.RtsRate = ProperMlmeRate;
-	if (pAd->CommonCfg.MlmeRate >= RATE_6)
-	{
-		pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM;
-		pAd->CommonCfg.MlmeTransmit.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate];
-		pAd->MacTab.Content[BSS0Mcast_WCID].HTPhyMode.field.MODE = MODE_OFDM;
-		pAd->MacTab.Content[BSS0Mcast_WCID].HTPhyMode.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate];
-	}
-	else
-	{
-		pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK;
-		pAd->CommonCfg.MlmeTransmit.field.MCS = pAd->CommonCfg.MlmeRate;
-		pAd->MacTab.Content[BSS0Mcast_WCID].HTPhyMode.field.MODE = MODE_CCK;
-		pAd->MacTab.Content[BSS0Mcast_WCID].HTPhyMode.field.MCS = pAd->CommonCfg.MlmeRate;
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("RTMPUpdateMlmeRate ==>   MlmeTransmit = 0x%x  \n" , pAd->CommonCfg.MlmeTransmit.word));
-}
-
-CHAR RTMPMaxRssi(
-	IN PRTMP_ADAPTER	pAd,
-	IN CHAR				Rssi0,
-	IN CHAR				Rssi1,
-	IN CHAR				Rssi2)
-{
-	CHAR	larger = -127;
-
-	if ((pAd->Antenna.field.RxPath == 1) && (Rssi0 != 0))
-	{
-		larger = Rssi0;
-	}
-
-	if ((pAd->Antenna.field.RxPath >= 2) && (Rssi1 != 0))
-	{
-		larger = max(Rssi0, Rssi1);
-	}
-
-	if ((pAd->Antenna.field.RxPath == 3) && (Rssi2 != 0))
-	{
-		larger = max(larger, Rssi2);
-	}
-
-	if (larger == -127)
-		larger = 0;
-
-	return larger;
-}
-
-
-// Antenna divesity use GPIO3 and EESK pin for control
-// Antenna and EEPROM access are both using EESK pin,
-// Therefor we should avoid accessing EESK at the same time
-// Then restore antenna after EEPROM access
-VOID AsicSetRxAnt(
-	IN PRTMP_ADAPTER	pAd,
-	IN UCHAR			Ant)
-{
-#ifdef RT30xx
-	UINT32	Value;
-	UINT32	x;
-
-	if ((pAd->EepromAccess)										||
-		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS))	||
-		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS))	||
-		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))			||
-		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
-	{
-		return;
-	}
-
-	// the antenna selection is through firmware and MAC register(GPIO3)
-	if (Ant == 0)
-	{
-		// Main antenna
-		RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
-		x |= (EESK);
-		RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
-
-		RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
-		Value &= ~(0x0808);
-		RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);
-		DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicSetRxAnt, switch to main antenna\n"));
-	}
-	else
-	{
-		// Aux antenna
-		RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
-		x &= ~(EESK);
-		RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
-
-		RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
-		Value &= ~(0x0808);
-		Value |= 0x08;
-		RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);
-		DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicSetRxAnt, switch to aux antenna\n"));
-	}
-#endif // RT30xx //
-}
-
-
-/*
-    ========================================================================
-    Routine Description:
-        Periodic evaluate antenna link status
-
-    Arguments:
-        pAd         - Adapter pointer
-
-    Return Value:
-        None
-
-    ========================================================================
-*/
-VOID AsicEvaluateRxAnt(
-	IN PRTMP_ADAPTER	pAd)
-{
-	UCHAR	BBPR3 = 0;
-
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS	|
-							fRTMP_ADAPTER_HALT_IN_PROGRESS	|
-							fRTMP_ADAPTER_RADIO_OFF			|
-							fRTMP_ADAPTER_NIC_NOT_EXIST		|
-							fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS) ||
-							OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)
-#ifdef RT30xx
-							|| (pAd->EepromAccess)
-#endif // RT30xx //
-							)
-		return;
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		//if (pAd->StaCfg.Psm == PWR_SAVE)
-		//	return;
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	// two antenna selection mechanism- one is antenna diversity, the other is failed antenna remove
-	// one is antenna diversity:there is only one antenna can rx and tx
-	// the other is failed antenna remove:two physical antenna can rx and tx
-	if (pAd->NicConfig2.field.AntDiversity)
-	{
-		DBGPRINT(RT_DEBUG_TRACE,("AntDiv - before evaluate Pair1-Ant (%d,%d)\n",
-			pAd->RxAnt.Pair1PrimaryRxAnt, pAd->RxAnt.Pair1SecondaryRxAnt));
-
-		AsicSetRxAnt(pAd, pAd->RxAnt.Pair1SecondaryRxAnt);
-
-		pAd->RxAnt.EvaluatePeriod = 1; // 1:Means switch to SecondaryRxAnt, 0:Means switch to Pair1PrimaryRxAnt
-		pAd->RxAnt.FirstPktArrivedWhenEvaluate = FALSE;
-		pAd->RxAnt.RcvPktNumWhenEvaluate = 0;
-
-		// a one-shot timer to end the evalution
-		// dynamic adjust antenna evaluation period according to the traffic
-		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
-			RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 100);
-		else
-			RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 300);
-	}
-	else
-	{
-
-#ifdef CONFIG_STA_SUPPORT
-		if (pAd->StaCfg.Psm == PWR_SAVE)
-			return;
-#endif // CONFIG_STA_SUPPORT //
-
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3);
-		BBPR3 &= (~0x18);
-		if(pAd->Antenna.field.RxPath == 3)
-		{
-			BBPR3 |= (0x10);
-		}
-		else if(pAd->Antenna.field.RxPath == 2)
-		{
-			BBPR3 |= (0x8);
-		}
-		else if(pAd->Antenna.field.RxPath == 1)
-		{
-			BBPR3 |= (0x0);
-		}
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
-			)
-		{
-			ULONG	TxTotalCnt = pAd->RalinkCounters.OneSecTxNoRetryOkCount +
-									pAd->RalinkCounters.OneSecTxRetryOkCount +
-									pAd->RalinkCounters.OneSecTxFailCount;
-
-			// dynamic adjust antenna evaluation period according to the traffic
-			if (TxTotalCnt > 50)
-			{
-				RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 20);
-				pAd->Mlme.bLowThroughput = FALSE;
-			}
-			else
-			{
-				RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 300);
-				pAd->Mlme.bLowThroughput = TRUE;
-			}
-		}
-	}
-}
-
-/*
-    ========================================================================
-    Routine Description:
-        After evaluation, check antenna link status
-
-    Arguments:
-        pAd         - Adapter pointer
-
-    Return Value:
-        None
-
-    ========================================================================
-*/
-VOID AsicRxAntEvalTimeout(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3)
-{
-	RTMP_ADAPTER	*pAd = (RTMP_ADAPTER *)FunctionContext;
-#ifdef CONFIG_STA_SUPPORT
-	UCHAR			BBPR3 = 0;
-	CHAR			larger = -127, rssi0, rssi1, rssi2;
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS	|
-							fRTMP_ADAPTER_HALT_IN_PROGRESS	|
-							fRTMP_ADAPTER_RADIO_OFF			|
-							fRTMP_ADAPTER_NIC_NOT_EXIST) ||
-							OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)
-#ifdef RT30xx
-							|| (pAd->EepromAccess)
-#endif // RT30xx //
-							)
-		return;
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		//if (pAd->StaCfg.Psm == PWR_SAVE)
-		//	return;
-
-		if (pAd->NicConfig2.field.AntDiversity)
-		{
-			if ((pAd->RxAnt.RcvPktNumWhenEvaluate != 0) && (pAd->RxAnt.Pair1AvgRssi[pAd->RxAnt.Pair1SecondaryRxAnt] >= pAd->RxAnt.Pair1AvgRssi[pAd->RxAnt.Pair1PrimaryRxAnt]))
-			{
-				UCHAR			temp;
-
-				//
-				// select PrimaryRxAntPair
-				//    Role change, Used Pair1SecondaryRxAnt as PrimaryRxAntPair.
-				//    Since Pair1SecondaryRxAnt Quality good than Pair1PrimaryRxAnt
-				//
-				temp = pAd->RxAnt.Pair1PrimaryRxAnt;
-				pAd->RxAnt.Pair1PrimaryRxAnt = pAd->RxAnt.Pair1SecondaryRxAnt;
-				pAd->RxAnt.Pair1SecondaryRxAnt = temp;
-
-				pAd->RxAnt.Pair1LastAvgRssi = (pAd->RxAnt.Pair1AvgRssi[pAd->RxAnt.Pair1SecondaryRxAnt] >> 3);
-				pAd->RxAnt.EvaluateStableCnt = 0;
-			}
-			else
-			{
-				// if the evaluated antenna is not better than original, switch back to original antenna
-				AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt);
-				pAd->RxAnt.EvaluateStableCnt ++;
-			}
-
-			pAd->RxAnt.EvaluatePeriod = 0; // 1:Means switch to SecondaryRxAnt, 0:Means switch to Pair1PrimaryRxAnt
-
-			DBGPRINT(RT_DEBUG_TRACE,("AsicRxAntEvalAction::After Eval(fix in #%d), <%d, %d>, RcvPktNumWhenEvaluate=%ld\n",
-					pAd->RxAnt.Pair1PrimaryRxAnt, (pAd->RxAnt.Pair1AvgRssi[0] >> 3), (pAd->RxAnt.Pair1AvgRssi[1] >> 3), pAd->RxAnt.RcvPktNumWhenEvaluate));
-		}
-		else
-		{
-			if (pAd->StaCfg.Psm == PWR_SAVE)
-				return;
-
-			// if the traffic is low, use average rssi as the criteria
-			if (pAd->Mlme.bLowThroughput == TRUE)
-			{
-				rssi0 = pAd->StaCfg.RssiSample.LastRssi0;
-				rssi1 = pAd->StaCfg.RssiSample.LastRssi1;
-				rssi2 = pAd->StaCfg.RssiSample.LastRssi2;
-			}
-			else
-			{
-				rssi0 = pAd->StaCfg.RssiSample.AvgRssi0;
-				rssi1 = pAd->StaCfg.RssiSample.AvgRssi1;
-				rssi2 = pAd->StaCfg.RssiSample.AvgRssi2;
-			}
-
-			if(pAd->Antenna.field.RxPath == 3)
-			{
-				larger = max(rssi0, rssi1);
-
-				if (larger > (rssi2 + 20))
-					pAd->Mlme.RealRxPath = 2;
-				else
-					pAd->Mlme.RealRxPath = 3;
-			}
-			else if(pAd->Antenna.field.RxPath == 2)
-			{
-				if (rssi0 > (rssi1 + 20))
-					pAd->Mlme.RealRxPath = 1;
-				else
-					pAd->Mlme.RealRxPath = 2;
-			}
-
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3);
-			BBPR3 &= (~0x18);
-			if(pAd->Mlme.RealRxPath == 3)
-			{
-				BBPR3 |= (0x10);
-			}
-			else if(pAd->Mlme.RealRxPath == 2)
-			{
-				BBPR3 |= (0x8);
-			}
-			else if(pAd->Mlme.RealRxPath == 1)
-			{
-				BBPR3 |= (0x0);
-			}
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
-		}
-	}
-
-#endif // CONFIG_STA_SUPPORT //
-
-}
-
-
-
-VOID APSDPeriodicExec(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3)
-{
-	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;
-
-	if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
-		return;
-
-	pAd->CommonCfg.TriggerTimerCount++;
-
-// Driver should not send trigger frame, it should be send by application layer
-/*
-	if (pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable
-		&& (pAd->CommonCfg.bNeedSendTriggerFrame ||
-		(((pAd->CommonCfg.TriggerTimerCount%20) == 19) && (!pAd->CommonCfg.bAPSDAC_BE || !pAd->CommonCfg.bAPSDAC_BK || !pAd->CommonCfg.bAPSDAC_VI || !pAd->CommonCfg.bAPSDAC_VO))))
-	{
-		DBGPRINT(RT_DEBUG_TRACE,("Sending trigger frame and enter service period when support APSD\n"));
-		RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, TRUE);
-		pAd->CommonCfg.bNeedSendTriggerFrame = FALSE;
-		pAd->CommonCfg.TriggerTimerCount = 0;
-		pAd->CommonCfg.bInServicePeriod = TRUE;
-	}*/
-}
-
-/*
-    ========================================================================
-    Routine Description:
-        Set/reset MAC registers according to bPiggyBack parameter
-
-    Arguments:
-        pAd         - Adapter pointer
-        bPiggyBack  - Enable / Disable Piggy-Back
-
-    Return Value:
-        None
-
-    ========================================================================
-*/
-VOID RTMPSetPiggyBack(
-    IN PRTMP_ADAPTER    pAd,
-    IN BOOLEAN          bPiggyBack)
-{
-	TX_LINK_CFG_STRUC  TxLinkCfg;
-
-	RTMP_IO_READ32(pAd, TX_LINK_CFG, &TxLinkCfg.word);
-
-	TxLinkCfg.field.TxCFAckEn = bPiggyBack;
-	RTMP_IO_WRITE32(pAd, TX_LINK_CFG, TxLinkCfg.word);
-}
-
-/*
-    ========================================================================
-    Routine Description:
-        check if this entry need to switch rate automatically
-
-    Arguments:
-        pAd
-        pEntry
-
-    Return Value:
-        TURE
-        FALSE
-
-    ========================================================================
-*/
-BOOLEAN RTMPCheckEntryEnableAutoRateSwitch(
-	IN PRTMP_ADAPTER    pAd,
-	IN PMAC_TABLE_ENTRY	pEntry)
-{
-	BOOLEAN		result = TRUE;
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// only associated STA counts
-		if (pEntry && (pEntry->ValidAsCLI) && (pEntry->Sst == SST_ASSOC))
-		{
-			result = pAd->StaCfg.bAutoTxRateSwitch;
-		}
-		else
-			result = FALSE;
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-
-
-	return result;
-}
-
-
-BOOLEAN RTMPAutoRateSwitchCheck(
-	IN PRTMP_ADAPTER    pAd)
-{
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if (pAd->StaCfg.bAutoTxRateSwitch)
-			return TRUE;
-	}
-#endif // CONFIG_STA_SUPPORT //
-	return FALSE;
-}
-
-
-/*
-    ========================================================================
-    Routine Description:
-        check if this entry need to fix tx legacy rate
-
-    Arguments:
-        pAd
-        pEntry
-
-    Return Value:
-        TURE
-        FALSE
-
-    ========================================================================
-*/
-UCHAR RTMPStaFixedTxMode(
-	IN PRTMP_ADAPTER    pAd,
-	IN PMAC_TABLE_ENTRY	pEntry)
-{
-	UCHAR	tx_mode = FIXED_TXMODE_HT;
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		tx_mode = (UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode;
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	return tx_mode;
-}
-
-/*
-    ========================================================================
-    Routine Description:
-        Overwrite HT Tx Mode by Fixed Legency Tx Mode, if specified.
-
-    Arguments:
-        pAd
-        pEntry
-
-    Return Value:
-        TURE
-        FALSE
-
-    ========================================================================
-*/
-VOID RTMPUpdateLegacyTxSetting(
-		UCHAR				fixed_tx_mode,
-		PMAC_TABLE_ENTRY	pEntry)
-{
-	HTTRANSMIT_SETTING TransmitSetting;
-
-	if (fixed_tx_mode == FIXED_TXMODE_HT)
-		return;
-
-	TransmitSetting.word = 0;
-
-	TransmitSetting.field.MODE = pEntry->HTPhyMode.field.MODE;
-	TransmitSetting.field.MCS = pEntry->HTPhyMode.field.MCS;
-
-	if (fixed_tx_mode == FIXED_TXMODE_CCK)
-	{
-		TransmitSetting.field.MODE = MODE_CCK;
-		// CCK mode allow MCS 0~3
-		if (TransmitSetting.field.MCS > MCS_3)
-			TransmitSetting.field.MCS = MCS_3;
-	}
-	else
-	{
-		TransmitSetting.field.MODE = MODE_OFDM;
-		// OFDM mode allow MCS 0~7
-		if (TransmitSetting.field.MCS > MCS_7)
-			TransmitSetting.field.MCS = MCS_7;
-	}
-
-	if (pEntry->HTPhyMode.field.MODE >= TransmitSetting.field.MODE)
-	{
-		pEntry->HTPhyMode.word = TransmitSetting.word;
-		DBGPRINT(RT_DEBUG_TRACE, ("RTMPUpdateLegacyTxSetting : wcid-%d, MODE=%s, MCS=%d \n",
-				pEntry->Aid, GetPhyMode(pEntry->HTPhyMode.field.MODE), pEntry->HTPhyMode.field.MCS));
-	}
-}
-
-#ifdef CONFIG_STA_SUPPORT
-/*
-	==========================================================================
-	Description:
-		dynamic tune BBP R66 to find a balance between sensibility and
-		noise isolation
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AsicStaBbpTuning(
-	IN PRTMP_ADAPTER pAd)
-{
-	UCHAR	OrigR66Value = 0, R66;//, R66UpperBound = 0x30, R66LowerBound = 0x30;
-	CHAR	Rssi;
-
-	// 2860C did not support Fase CCA, therefore can't tune
-	if (pAd->MACVersion == 0x28600100)
-		return;
-
-	//
-	// work as a STA
-	//
-	if (pAd->Mlme.CntlMachine.CurrState != CNTL_IDLE)  // no R66 tuning when SCANNING
-		return;
-
-	if ((pAd->OpMode == OPMODE_STA)
-		&& (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
-			)
-		&& !(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
-		)
-	{
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66, &OrigR66Value);
-		R66 = OrigR66Value;
-
-		if (pAd->Antenna.field.RxPath > 1)
-			Rssi = (pAd->StaCfg.RssiSample.AvgRssi0 + pAd->StaCfg.RssiSample.AvgRssi1) >> 1;
-		else
-			Rssi = pAd->StaCfg.RssiSample.AvgRssi0;
-
-		if (pAd->LatchRfRegs.Channel <= 14)
-		{	//BG band
-#ifdef RT30xx
-			// RT3070 is a no LNA solution, it should have different control regarding to AGC gain control
-			// Otherwise, it will have some throughput side effect when low RSSI
-			if (IS_RT30xx(pAd))
-			{
-				if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY)
-				{
-					R66 = 0x1C + 2*GET_LNA_GAIN(pAd) + 0x20;
-					if (OrigR66Value != R66)
-					{
-						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-					}
-				}
-				else
-				{
-					R66 = 0x1C + 2*GET_LNA_GAIN(pAd);
-					if (OrigR66Value != R66)
-					{
-						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-					}
-				}
-			}
-			else
-#endif // RT30xx //
-			{
-				if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY)
-				{
-					R66 = (0x2E + GET_LNA_GAIN(pAd)) + 0x10;
-					if (OrigR66Value != R66)
-					{
-						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-					}
-				}
-				else
-				{
-					R66 = 0x2E + GET_LNA_GAIN(pAd);
-					if (OrigR66Value != R66)
-					{
-						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-					}
-				}
-			}
-
-		}
-		else
-		{	//A band
-			if (pAd->CommonCfg.BBPCurrentBW == BW_20)
-			{
-				if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY)
-				{
-					R66 = 0x32 + (GET_LNA_GAIN(pAd)*5)/3 + 0x10;
-					if (OrigR66Value != R66)
-					{
-						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-					}
-				}
-				else
-				{
-					R66 = 0x32 + (GET_LNA_GAIN(pAd)*5)/3;
-					if (OrigR66Value != R66)
-					{
-						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-					}
-				}
-			}
-			else
-			{
-				if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY)
-				{
-					R66 = 0x3A + (GET_LNA_GAIN(pAd)*5)/3 + 0x10;
-					if (OrigR66Value != R66)
-					{
-						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-					}
-				}
-				else
-				{
-					R66 = 0x3A + (GET_LNA_GAIN(pAd)*5)/3;
-					if (OrigR66Value != R66)
-					{
-						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-					}
-				}
-			}
-		}
-
-
-	}
-}
-#endif // CONFIG_STA_SUPPORT //
-
-VOID RTMPSetAGCInitValue(
-	IN PRTMP_ADAPTER	pAd,
-	IN UCHAR			BandWidth)
-{
-	UCHAR	R66 = 0x30;
-
-	if (pAd->LatchRfRegs.Channel <= 14)
-	{	// BG band
-		R66 = 0x2E + GET_LNA_GAIN(pAd);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-	}
-	else
-	{	//A band
-		if (BandWidth == BW_20)
-		{
-			R66 = (UCHAR)(0x32 + (GET_LNA_GAIN(pAd)*5)/3);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-		}
-#ifdef DOT11_N_SUPPORT
-		else
-		{
-			R66 = (UCHAR)(0x3A + (GET_LNA_GAIN(pAd)*5)/3);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-		}
-#endif // DOT11_N_SUPPORT //
-	}
-
-}
-
-VOID AsicTurnOffRFClk(
-	IN PRTMP_ADAPTER pAd,
-	IN	UCHAR		Channel)
-{
-	// RF R2 bit 18 = 0
-	UINT32			R1 = 0, R2 = 0, R3 = 0;
-	UCHAR			index;
-	RTMP_RF_REGS	*RFRegTable;
-
-#ifdef RT30xx
-	// The RF programming sequence is difference between 3xxx and 2xxx
-	if (IS_RT3090(pAd))
-	{
-		RT30xxLoadRFSleepModeSetup(pAd);  // add by johnli,  RF power sequence setup, load RF sleep-mode setup
-	}
-	else
-	{
-#endif // RT30xx //
-	RFRegTable = RF2850RegTable;
-
-	switch (pAd->RfIcType)
-	{
-		case RFIC_2820:
-		case RFIC_2850:
-		case RFIC_2720:
-		case RFIC_2750:
-
-			for (index = 0; index < NUM_OF_2850_CHNL; index++)
-			{
-				if (Channel == RFRegTable[index].Channel)
-				{
-					R1 = RFRegTable[index].R1 & 0xffffdfff;
-					R2 = RFRegTable[index].R2 & 0xfffbffff;
-					R3 = RFRegTable[index].R3 & 0xfff3ffff;
-
-					RTMP_RF_IO_WRITE32(pAd, R1);
-					RTMP_RF_IO_WRITE32(pAd, R2);
-
-					// Program R1b13 to 1, R3/b18,19 to 0, R2b18 to 0.
-					// Set RF R2 bit18=0, R3 bit[18:19]=0
-					//if (pAd->StaCfg.bRadio == FALSE)
-					if (1)
-					{
-						RTMP_RF_IO_WRITE32(pAd, R3);
-
-						DBGPRINT(RT_DEBUG_TRACE, ("AsicTurnOffRFClk#%d(RF=%d, ) , R2=0x%08x,  R3 = 0x%08x \n",
-							Channel, pAd->RfIcType, R2, R3));
-					}
-					else
-						DBGPRINT(RT_DEBUG_TRACE, ("AsicTurnOffRFClk#%d(RF=%d, ) , R2=0x%08x \n",
-							Channel, pAd->RfIcType, R2));
-					break;
-				}
-			}
-			break;
-
-		default:
-			break;
-	}
-#ifdef RT30xx
-	}
-#endif // RT30xx //
-
-}
-
-
-VOID AsicTurnOnRFClk(
-	IN PRTMP_ADAPTER pAd,
-	IN	UCHAR			Channel)
-{
-	// RF R2 bit 18 = 0
-	UINT32			R1 = 0, R2 = 0, R3 = 0;
-	UCHAR			index;
-	RTMP_RF_REGS	*RFRegTable;
-
-#ifdef RT30xx
-	// The RF programming sequence is difference between 3xxx and 2xxx
-	if (IS_RT3090(pAd))
-	{
-	}
-	else
-	{
-#endif // RT30xx //
-	RFRegTable = RF2850RegTable;
-
-	switch (pAd->RfIcType)
-	{
-		case RFIC_2820:
-		case RFIC_2850:
-		case RFIC_2720:
-		case RFIC_2750:
-
-			for (index = 0; index < NUM_OF_2850_CHNL; index++)
-			{
-				if (Channel == RFRegTable[index].Channel)
-				{
-					R3 = pAd->LatchRfRegs.R3;
-					R3 &= 0xfff3ffff;
-					R3 |= 0x00080000;
-					RTMP_RF_IO_WRITE32(pAd, R3);
-
-					R1 = RFRegTable[index].R1;
-					RTMP_RF_IO_WRITE32(pAd, R1);
-
-					R2 = RFRegTable[index].R2;
-					if (pAd->Antenna.field.TxPath == 1)
-					{
-						R2 |= 0x4000;	// If TXpath is 1, bit 14 = 1;
-					}
-
-					if (pAd->Antenna.field.RxPath == 2)
-					{
-						R2 |= 0x40;	// write 1 to off Rxpath.
-					}
-					else if (pAd->Antenna.field.RxPath == 1)
-					{
-						R2 |= 0x20040;	// write 1 to off RxPath
-					}
-					RTMP_RF_IO_WRITE32(pAd, R2);
-
-					break;
-				}
-			}
-			break;
-
-		default:
-			break;
-	}
-
-#ifdef RT30xx
-	}
-#endif // RT30xx //
-
-}
-
+#include "../../rt2870/common/mlme.c"
diff --git a/drivers/staging/rt3070/common/netif_block.c b/drivers/staging/rt3070/common/netif_block.c
deleted file mode 100644
index 4773c11bedd..00000000000
--- a/drivers/staging/rt3070/common/netif_block.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-#include "../rt_config.h"
-#include "netif_block.h"
-
-static NETIF_ENTRY freeNetIfEntryPool[FREE_NETIF_POOL_SIZE];
-static LIST_HEADER freeNetIfEntryList;
-
-void initblockQueueTab(
-	IN PRTMP_ADAPTER pAd)
-{
-	int i;
-
-	initList(&freeNetIfEntryList);
-	for (i = 0; i < FREE_NETIF_POOL_SIZE; i++)
-		insertTailList(&freeNetIfEntryList, (PLIST_ENTRY)&freeNetIfEntryPool[i]);
-
-	for (i=0; i < NUM_OF_TX_RING; i++)
-		initList(&pAd->blockQueueTab[i].NetIfList);
-
-	return;
-}
-
-BOOLEAN blockNetIf(
-	IN PBLOCK_QUEUE_ENTRY pBlockQueueEntry,
-	IN PNET_DEV pNetDev)
-{
-	PNETIF_ENTRY pNetIfEntry = NULL;
-
-	if ((pNetIfEntry = (PNETIF_ENTRY)removeHeadList(&freeNetIfEntryList)) != NULL)
-	{
-		netif_stop_queue(pNetDev);
-		pNetIfEntry->pNetDev = pNetDev;
-		insertTailList(&pBlockQueueEntry->NetIfList, (PLIST_ENTRY)pNetIfEntry);
-
-		pBlockQueueEntry->SwTxQueueBlockFlag = TRUE;
-		DBGPRINT(RT_DEBUG_TRACE, ("netif_stop_queue(%s)\n", pNetDev->name));
-	}
-	else
-		return FALSE;
-
-	return TRUE;
-}
-
-VOID releaseNetIf(
-	IN PBLOCK_QUEUE_ENTRY pBlockQueueEntry)
-{
-	PNETIF_ENTRY pNetIfEntry = NULL;
-	PLIST_HEADER pNetIfList = &pBlockQueueEntry->NetIfList;
-
-	while((pNetIfEntry = (PNETIF_ENTRY)removeHeadList(pNetIfList)) !=  NULL)
-	{
-		PNET_DEV pNetDev = pNetIfEntry->pNetDev;
-		netif_wake_queue(pNetDev);
-		insertTailList(&freeNetIfEntryList, (PLIST_ENTRY)pNetIfEntry);
-
-		DBGPRINT(RT_DEBUG_TRACE, ("netif_wake_queue(%s)\n", pNetDev->name));
-	}
-	pBlockQueueEntry->SwTxQueueBlockFlag = FALSE;
-	return;
-}
-
-
-VOID StopNetIfQueue(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR QueIdx,
-	IN PNDIS_PACKET pPacket)
-{
-	PNET_DEV NetDev = NULL;
-	UCHAR IfIdx = 0;
-	BOOLEAN valid = FALSE;
-
-#ifdef WDS_SUPPORT
-	if (RTMP_GET_PACKET_NET_DEVICE(pPacket) >= MIN_NET_DEVICE_FOR_WDS)
-	{
-		IfIdx = (RTMP_GET_PACKET_NET_DEVICE(pPacket) - MIN_NET_DEVICE_FOR_WDS) % MAX_WDS_ENTRY;
-		NetDev = pAd->WdsTab.WdsEntry[IfIdx].dev;
-	}
-	else
-#endif // WDS_SUPPORT //
-	{
-#ifdef MBSS_SUPPORT
-		if (pAd->OpMode == OPMODE_AP)
-		{
-			IfIdx = (RTMP_GET_PACKET_NET_DEVICE(pPacket) - MIN_NET_DEVICE_FOR_MBSSID) % MAX_MBSSID_NUM;
-			NetDev = pAd->ApCfg.MBSSID[IfIdx].MSSIDDev;
-		}
-		else
-		{
-			IfIdx = MAIN_MBSSID;
-			NetDev = pAd->net_dev;
-		}
-#else
-		IfIdx = MAIN_MBSSID;
-		NetDev = pAd->net_dev;
-#endif
-	}
-
-	// WMM support 4 software queues.
-	// One software queue full doesn't mean device have no capbility to transmit packet.
-	// So disable block Net-If queue function while WMM enable.
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		valid = (pAd->CommonCfg.bWmmCapable == TRUE) ? FALSE : TRUE;
-#endif // CONFIG_STA_SUPPORT //
-
-	if (valid)
-		blockNetIf(&pAd->blockQueueTab[QueIdx], NetDev);
-	return;
-}
-
diff --git a/drivers/staging/rt3070/common/rtmp_init.c b/drivers/staging/rt3070/common/rtmp_init.c
index 4503f6c6d95..4709e5f28a8 100644
--- a/drivers/staging/rt3070/common/rtmp_init.c
+++ b/drivers/staging/rt3070/common/rtmp_init.c
@@ -1,4197 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	rtmp_init.c
-
-	Abstract:
-	Miniport generic portion header file
-
-	Revision History:
-	Who         When          What
-	--------    ----------    ----------------------------------------------
-	Paul Lin    2002-08-01    created
-    John Chang  2004-08-20    RT2561/2661 use scatter-gather scheme
-    Jan Lee  2006-09-15    RT2860. Change for 802.11n , EEPROM, Led, BA, HT.
-*/
-#include	"../rt_config.h"
-#include 	"../firmware.h"
-
-//#define BIN_IN_FILE /* use *.bin firmware */
-
-UCHAR    BIT8[] = {0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80};
-ULONG    BIT32[] = {0x00000001, 0x00000002, 0x00000004, 0x00000008,
-					0x00000010, 0x00000020, 0x00000040, 0x00000080,
-					0x00000100, 0x00000200, 0x00000400, 0x00000800,
-					0x00001000, 0x00002000, 0x00004000, 0x00008000,
-					0x00010000, 0x00020000, 0x00040000, 0x00080000,
-					0x00100000, 0x00200000, 0x00400000, 0x00800000,
-					0x01000000, 0x02000000, 0x04000000, 0x08000000,
-					0x10000000, 0x20000000, 0x40000000, 0x80000000};
-
-char*   CipherName[] = {"none","wep64","wep128","TKIP","AES","CKIP64","CKIP128"};
-
-const unsigned short ccitt_16Table[] = {
-	0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50A5, 0x60C6, 0x70E7,
-	0x8108, 0x9129, 0xA14A, 0xB16B, 0xC18C, 0xD1AD, 0xE1CE, 0xF1EF,
-	0x1231, 0x0210, 0x3273, 0x2252, 0x52B5, 0x4294, 0x72F7, 0x62D6,
-	0x9339, 0x8318, 0xB37B, 0xA35A, 0xD3BD, 0xC39C, 0xF3FF, 0xE3DE,
-	0x2462, 0x3443, 0x0420, 0x1401, 0x64E6, 0x74C7, 0x44A4, 0x5485,
-	0xA56A, 0xB54B, 0x8528, 0x9509, 0xE5EE, 0xF5CF, 0xC5AC, 0xD58D,
-	0x3653, 0x2672, 0x1611, 0x0630, 0x76D7, 0x66F6, 0x5695, 0x46B4,
-	0xB75B, 0xA77A, 0x9719, 0x8738, 0xF7DF, 0xE7FE, 0xD79D, 0xC7BC,
-	0x48C4, 0x58E5, 0x6886, 0x78A7, 0x0840, 0x1861, 0x2802, 0x3823,
-	0xC9CC, 0xD9ED, 0xE98E, 0xF9AF, 0x8948, 0x9969, 0xA90A, 0xB92B,
-	0x5AF5, 0x4AD4, 0x7AB7, 0x6A96, 0x1A71, 0x0A50, 0x3A33, 0x2A12,
-	0xDBFD, 0xCBDC, 0xFBBF, 0xEB9E, 0x9B79, 0x8B58, 0xBB3B, 0xAB1A,
-	0x6CA6, 0x7C87, 0x4CE4, 0x5CC5, 0x2C22, 0x3C03, 0x0C60, 0x1C41,
-	0xEDAE, 0xFD8F, 0xCDEC, 0xDDCD, 0xAD2A, 0xBD0B, 0x8D68, 0x9D49,
-	0x7E97, 0x6EB6, 0x5ED5, 0x4EF4, 0x3E13, 0x2E32, 0x1E51, 0x0E70,
-	0xFF9F, 0xEFBE, 0xDFDD, 0xCFFC, 0xBF1B, 0xAF3A, 0x9F59, 0x8F78,
-	0x9188, 0x81A9, 0xB1CA, 0xA1EB, 0xD10C, 0xC12D, 0xF14E, 0xE16F,
-	0x1080, 0x00A1, 0x30C2, 0x20E3, 0x5004, 0x4025, 0x7046, 0x6067,
-	0x83B9, 0x9398, 0xA3FB, 0xB3DA, 0xC33D, 0xD31C, 0xE37F, 0xF35E,
-	0x02B1, 0x1290, 0x22F3, 0x32D2, 0x4235, 0x5214, 0x6277, 0x7256,
-	0xB5EA, 0xA5CB, 0x95A8, 0x8589, 0xF56E, 0xE54F, 0xD52C, 0xC50D,
-	0x34E2, 0x24C3, 0x14A0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405,
-	0xA7DB, 0xB7FA, 0x8799, 0x97B8, 0xE75F, 0xF77E, 0xC71D, 0xD73C,
-	0x26D3, 0x36F2, 0x0691, 0x16B0, 0x6657, 0x7676, 0x4615, 0x5634,
-	0xD94C, 0xC96D, 0xF90E, 0xE92F, 0x99C8, 0x89E9, 0xB98A, 0xA9AB,
-	0x5844, 0x4865, 0x7806, 0x6827, 0x18C0, 0x08E1, 0x3882, 0x28A3,
-	0xCB7D, 0xDB5C, 0xEB3F, 0xFB1E, 0x8BF9, 0x9BD8, 0xABBB, 0xBB9A,
-	0x4A75, 0x5A54, 0x6A37, 0x7A16, 0x0AF1, 0x1AD0, 0x2AB3, 0x3A92,
-	0xFD2E, 0xED0F, 0xDD6C, 0xCD4D, 0xBDAA, 0xAD8B, 0x9DE8, 0x8DC9,
-	0x7C26, 0x6C07, 0x5C64, 0x4C45, 0x3CA2, 0x2C83, 0x1CE0, 0x0CC1,
-	0xEF1F, 0xFF3E, 0xCF5D, 0xDF7C, 0xAF9B, 0xBFBA, 0x8FD9, 0x9FF8,
-	0x6E17, 0x7E36, 0x4E55, 0x5E74, 0x2E93, 0x3EB2, 0x0ED1, 0x1EF0
-};
-#define ByteCRC16(v, crc) \
-	(unsigned short)((crc << 8) ^  ccitt_16Table[((crc >> 8) ^ (v)) & 255])
-
-unsigned char BitReverse(unsigned char x)
-{
-	int i;
-	unsigned char Temp=0;
-	for(i=0; ; i++)
-	{
-		if(x & 0x80)	Temp |= 0x80;
-		if(i==7)		break;
-		x	<<= 1;
-		Temp >>= 1;
-	}
-	return Temp;
-}
-
-//
-// BBP register initialization set
-//
-REG_PAIR   BBPRegTable[] = {
-	{BBP_R65,		0x2C},		// fix rssi issue
-	{BBP_R66,		0x38},	// Also set this default value to pAd->BbpTuning.R66CurrentValue at initial
-	{BBP_R69,		0x12},
-	{BBP_R70,		0xa},	// BBP_R70 will change to 0x8 in ApStartUp and LinkUp for rt2860C, otherwise value is 0xa
-	{BBP_R73,		0x10},
-	{BBP_R81,		0x37},
-	{BBP_R82,		0x62},
-	{BBP_R83,		0x6A},
-	{BBP_R84,		0x99},	// 0x19 is for rt2860E and after. This is for extension channel overlapping IOT. 0x99 is for rt2860D and before
-	{BBP_R86,		0x00},	// middle range issue, Rory @2008-01-28
-	{BBP_R91,		0x04},	// middle range issue, Rory @2008-01-28
-	{BBP_R92,		0x00},	// middle range issue, Rory @2008-01-28
-	{BBP_R103,  	0x00}, 	// near range high-power issue, requested from Gary @2008-0528
-	{BBP_R105,		0x05},	// 0x05 is for rt2860E to turn on FEQ control. It is safe for rt2860D and before, because Bit 7:2 are reserved in rt2860D and before.
-};
-#define	NUM_BBP_REG_PARMS	(sizeof(BBPRegTable) / sizeof(REG_PAIR))
-
-//
-// RF register initialization set
-//
-#ifdef RT30xx
-REG_PAIR   RT30xx_RFRegTable[] = {
-        {RF_R04,          0x40},
-        {RF_R05,          0x03},
-        {RF_R06,          0x02},
-        {RF_R07,          0x70},
-        {RF_R09,          0x0F},
-        {RF_R10,          0x41},
-        {RF_R11,          0x21},
-        {RF_R12,          0x7B},
-        {RF_R14,          0x90},
-        {RF_R15,          0x58},
-        {RF_R16,          0xB3},
-        {RF_R17,          0x92},
-        {RF_R18,          0x2C},
-        {RF_R19,          0x02},
-        {RF_R20,          0xBA},
-        {RF_R21,          0xDB},
-        {RF_R24,          0x16},
-        {RF_R25,          0x01},
-        {RF_R29,          0x1F},
-};
-#define	NUM_RF_REG_PARMS	(sizeof(RT30xx_RFRegTable) / sizeof(REG_PAIR))
-#endif // RT30xx //
-
-//
-// ASIC register initialization sets
-//
-
-RTMP_REG_PAIR	MACRegTable[] =	{
-#if defined(HW_BEACON_OFFSET) && (HW_BEACON_OFFSET == 0x200)
-	{BCN_OFFSET0,			0xf8f0e8e0}, /* 0x3800(e0), 0x3A00(e8), 0x3C00(f0), 0x3E00(f8), 512B for each beacon */
-	{BCN_OFFSET1,			0x6f77d0c8}, /* 0x3200(c8), 0x3400(d0), 0x1DC0(77), 0x1BC0(6f), 512B for each beacon */
-#elif defined(HW_BEACON_OFFSET) && (HW_BEACON_OFFSET == 0x100)
-	{BCN_OFFSET0,			0xece8e4e0}, /* 0x3800, 0x3A00, 0x3C00, 0x3E00, 512B for each beacon */
-	{BCN_OFFSET1,			0xfcf8f4f0}, /* 0x3800, 0x3A00, 0x3C00, 0x3E00, 512B for each beacon */
-#else
-    #error You must re-calculate new value for BCN_OFFSET0 & BCN_OFFSET1 in MACRegTable[]!!!
-#endif // HW_BEACON_OFFSET //
-
-	{LEGACY_BASIC_RATE,		0x0000013f}, //  Basic rate set bitmap
-	{HT_BASIC_RATE,		0x00008003}, // Basic HT rate set , 20M, MCS=3, MM. Format is the same as in TXWI.
-	{MAC_SYS_CTRL,		0x00}, // 0x1004, , default Disable RX
-	{RX_FILTR_CFG,		0x17f97}, //0x1400  , RX filter control,
-	{BKOFF_SLOT_CFG,	0x209}, // default set short slot time, CC_DELAY_TIME should be 2
-	//{TX_SW_CFG0,		0x40a06}, // Gary,2006-08-23
-	{TX_SW_CFG0,		0x0}, 		// Gary,2008-05-21 for CWC test
-	{TX_SW_CFG1,		0x80606}, // Gary,2006-08-23
-	{TX_LINK_CFG,		0x1020},		// Gary,2006-08-23
-	{TX_TIMEOUT_CFG,	0x000a2090},
-	{MAX_LEN_CFG,		MAX_AGGREGATION_SIZE | 0x00001000},	// 0x3018, MAX frame length. Max PSDU = 16kbytes.
-	{LED_CFG,		0x7f031e46}, // Gary, 2006-08-23
-
-//#ifdef CONFIG_STA_SUPPORT
-//	{WMM_AIFSN_CFG,		0x00002273},
-//	{WMM_CWMIN_CFG,		0x00002344},
-//	{WMM_CWMAX_CFG,		0x000034aa},
-//#endif // CONFIG_STA_SUPPORT //
-#ifdef INF_AMAZON_SE
-	{PBF_MAX_PCNT,			0x1F3F6F6F}, 	//iverson modify for usb issue, 2008/09/19
-											// 6F + 6F < total page count FE
-											// so that RX doesn't occupy TX's buffer space when WMM congestion.
-#else
-	{PBF_MAX_PCNT,			0x1F3FBF9F}, 	//0x1F3f7f9f},		//Jan, 2006/04/20
-#endif // INF_AMAZON_SE //
-	//{TX_RTY_CFG,			0x6bb80408},	// Jan, 2006/11/16
-	{TX_RTY_CFG,			0x47d01f0f},	// Jan, 2006/11/16, Set TxWI->ACK =0 in Probe Rsp Modify for 2860E ,2007-08-03
-	{AUTO_RSP_CFG,			0x00000013},	// Initial Auto_Responder, because QA will turn off Auto-Responder
-	{CCK_PROT_CFG,			0x05740003 /*0x01740003*/},	// Initial Auto_Responder, because QA will turn off Auto-Responder. And RTS threshold is enabled.
-	{OFDM_PROT_CFG,			0x05740003 /*0x01740003*/},	// Initial Auto_Responder, because QA will turn off Auto-Responder. And RTS threshold is enabled.
-//PS packets use Tx1Q (for HCCA) when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA)
-#ifdef RT2870
-#ifdef CONFIG_STA_SUPPORT
-	{PBF_CFG, 				0xf40006}, 		// Only enable Queue 2
-#endif // CONFIG_STA_SUPPORT //
-	{MM40_PROT_CFG,			0x3F44084},		// Initial Auto_Responder, because QA will turn off Auto-Responder
-	{WPDMA_GLO_CFG,			0x00000030},
-#endif // RT2870 //
-	{GF20_PROT_CFG,			0x01744004},    // set 19:18 --> Short NAV for MIMO PS
-	{GF40_PROT_CFG,			0x03F44084},
-	{MM20_PROT_CFG,			0x01744004},
-	{TXOP_CTRL_CFG,			0x0000583f, /*0x0000243f*/ /*0x000024bf*/},	//Extension channel backoff.
-	{TX_RTS_CFG,			0x00092b20},
-//#ifdef WIFI_TEST
-	{EXP_ACK_TIME,			0x002400ca},	// default value
-//#else
-//	{EXP_ACK_TIME,			0x005400ca},	// suggested by Gray @ 20070323 for 11n intel-sta throughput
-//#endif // end - WIFI_TEST //
-	{TXOP_HLDR_ET, 			0x00000002},
-
-	/* Jerry comments 2008/01/16: we use SIFS = 10us in CCK defaultly, but it seems that 10us
-		is too small for INTEL 2200bg card, so in MBSS mode, the delta time between beacon0
-		and beacon1 is SIFS (10us), so if INTEL 2200bg card connects to BSS0, the ping
-		will always lost. So we change the SIFS of CCK from 10us to 16us. */
-	{XIFS_TIME_CFG,			0x33a41010},
-	{PWR_PIN_CFG,			0x00000003},	// patch for 2880-E
-};
-
-
-#ifdef CONFIG_STA_SUPPORT
-RTMP_REG_PAIR	STAMACRegTable[] =	{
-	{WMM_AIFSN_CFG,		0x00002273},
-	{WMM_CWMIN_CFG,	0x00002344},
-	{WMM_CWMAX_CFG,	0x000034aa},
-};
-#endif // CONFIG_STA_SUPPORT //
-
-#define	NUM_MAC_REG_PARMS		(sizeof(MACRegTable) / sizeof(RTMP_REG_PAIR))
-#ifdef CONFIG_STA_SUPPORT
-#define	NUM_STA_MAC_REG_PARMS	(sizeof(STAMACRegTable) / sizeof(RTMP_REG_PAIR))
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef RT2870
-//
-// RT2870 Firmware Spec only used 1 oct for version expression
-//
-#define FIRMWARE_MINOR_VERSION	7
-
-#endif // RT2870 //
-
-// New 8k byte firmware size for RT3071/RT3072
-#define FIRMWAREIMAGE_MAX_LENGTH	0x2000
-#define FIRMWAREIMAGE_LENGTH		(sizeof (FirmwareImage) / sizeof(UCHAR))
-#define FIRMWARE_MAJOR_VERSION	0
-
-#define FIRMWAREIMAGEV1_LENGTH	0x1000
-#define FIRMWAREIMAGEV2_LENGTH	0x1000
-
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Allocate RTMP_ADAPTER data block and do some initialization
-
-	Arguments:
-		Adapter		Pointer to our adapter
-
-	Return Value:
-		NDIS_STATUS_SUCCESS
-		NDIS_STATUS_FAILURE
-
-	IRQL = PASSIVE_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-NDIS_STATUS	RTMPAllocAdapterBlock(
-	IN  PVOID	handle,
-	OUT	PRTMP_ADAPTER	*ppAdapter)
-{
-	PRTMP_ADAPTER	pAd;
-	NDIS_STATUS		Status;
-	INT 			index;
-	UCHAR			*pBeaconBuf = NULL;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("--> RTMPAllocAdapterBlock\n"));
-
-	*ppAdapter = NULL;
-
-	do
-	{
-		// Allocate RTMP_ADAPTER memory block
-		pBeaconBuf = kmalloc(MAX_BEACON_SIZE, MEM_ALLOC_FLAG);
-		if (pBeaconBuf == NULL)
-		{
-			Status = NDIS_STATUS_FAILURE;
-			DBGPRINT_ERR(("Failed to allocate memory - BeaconBuf!\n"));
-			break;
-		}
-
-		Status = AdapterBlockAllocateMemory(handle, (PVOID *)&pAd);
-		if (Status != NDIS_STATUS_SUCCESS)
-		{
-			DBGPRINT_ERR(("Failed to allocate memory - ADAPTER\n"));
-			break;
-		}
-		pAd->BeaconBuf = pBeaconBuf;
-		printk("\n\n=== pAd = %p, size = %d ===\n\n", pAd, (UINT32)sizeof(RTMP_ADAPTER));
-
-
-		// Init spin locks
-		NdisAllocateSpinLock(&pAd->MgmtRingLock);
-
-		for (index =0 ; index < NUM_OF_TX_RING; index++)
-		{
-			NdisAllocateSpinLock(&pAd->TxSwQueueLock[index]);
-			NdisAllocateSpinLock(&pAd->DeQueueLock[index]);
-			pAd->DeQueueRunning[index] = FALSE;
-		}
-
-		NdisAllocateSpinLock(&pAd->irq_lock);
-
-	} while (FALSE);
-
-	if ((Status != NDIS_STATUS_SUCCESS) && (pBeaconBuf))
-		kfree(pBeaconBuf);
-
-	*ppAdapter = pAd;
-
-	DBGPRINT_S(Status, ("<-- RTMPAllocAdapterBlock, Status=%x\n", Status));
-	return Status;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Read initial Tx power per MCS and BW from EEPROM
-
-	Arguments:
-		Adapter						Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPReadTxPwrPerRate(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	ULONG		data, Adata, Gdata;
-	USHORT		i, value, value2;
-	INT			Apwrdelta, Gpwrdelta;
-	UCHAR		t1,t2,t3,t4;
-	BOOLEAN		bValid, bApwrdeltaMinus = TRUE, bGpwrdeltaMinus = TRUE;
-
-	//
-	// Get power delta for 20MHz and 40MHz.
-	//
-	DBGPRINT(RT_DEBUG_TRACE, ("Txpower per Rate\n"));
-	RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_DELTA, value2);
-	Apwrdelta = 0;
-	Gpwrdelta = 0;
-
-	if ((value2 & 0xff) != 0xff)
-	{
-		if ((value2 & 0x80))
-			Gpwrdelta = (value2&0xf);
-
-		if ((value2 & 0x40))
-			bGpwrdeltaMinus = FALSE;
-		else
-			bGpwrdeltaMinus = TRUE;
-	}
-	if ((value2 & 0xff00) != 0xff00)
-	{
-		if ((value2 & 0x8000))
-			Apwrdelta = ((value2&0xf00)>>8);
-
-		if ((value2 & 0x4000))
-			bApwrdeltaMinus = FALSE;
-		else
-			bApwrdeltaMinus = TRUE;
-	}
-	DBGPRINT(RT_DEBUG_TRACE, ("Gpwrdelta = %x, Apwrdelta = %x .\n", Gpwrdelta, Apwrdelta));
-
-	//
-	// Get Txpower per MCS for 20MHz in 2.4G.
-	//
-	for (i=0; i<5; i++)
-	{
-		RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_20MHZ_2_4G + i*4, value);
-		data = value;
-		if (bApwrdeltaMinus == FALSE)
-		{
-			t1 = (value&0xf)+(Apwrdelta);
-			if (t1 > 0xf)
-				t1 = 0xf;
-			t2 = ((value&0xf0)>>4)+(Apwrdelta);
-			if (t2 > 0xf)
-				t2 = 0xf;
-			t3 = ((value&0xf00)>>8)+(Apwrdelta);
-			if (t3 > 0xf)
-				t3 = 0xf;
-			t4 = ((value&0xf000)>>12)+(Apwrdelta);
-			if (t4 > 0xf)
-				t4 = 0xf;
-		}
-		else
-		{
-			if ((value&0xf) > Apwrdelta)
-				t1 = (value&0xf)-(Apwrdelta);
-			else
-				t1 = 0;
-			if (((value&0xf0)>>4) > Apwrdelta)
-				t2 = ((value&0xf0)>>4)-(Apwrdelta);
-			else
-				t2 = 0;
-			if (((value&0xf00)>>8) > Apwrdelta)
-				t3 = ((value&0xf00)>>8)-(Apwrdelta);
-			else
-				t3 = 0;
-			if (((value&0xf000)>>12) > Apwrdelta)
-				t4 = ((value&0xf000)>>12)-(Apwrdelta);
-			else
-				t4 = 0;
-		}
-		Adata = t1 + (t2<<4) + (t3<<8) + (t4<<12);
-		if (bGpwrdeltaMinus == FALSE)
-		{
-			t1 = (value&0xf)+(Gpwrdelta);
-			if (t1 > 0xf)
-				t1 = 0xf;
-			t2 = ((value&0xf0)>>4)+(Gpwrdelta);
-			if (t2 > 0xf)
-				t2 = 0xf;
-			t3 = ((value&0xf00)>>8)+(Gpwrdelta);
-			if (t3 > 0xf)
-				t3 = 0xf;
-			t4 = ((value&0xf000)>>12)+(Gpwrdelta);
-			if (t4 > 0xf)
-				t4 = 0xf;
-		}
-		else
-		{
-			if ((value&0xf) > Gpwrdelta)
-				t1 = (value&0xf)-(Gpwrdelta);
-			else
-				t1 = 0;
-			if (((value&0xf0)>>4) > Gpwrdelta)
-				t2 = ((value&0xf0)>>4)-(Gpwrdelta);
-			else
-				t2 = 0;
-			if (((value&0xf00)>>8) > Gpwrdelta)
-				t3 = ((value&0xf00)>>8)-(Gpwrdelta);
-			else
-				t3 = 0;
-			if (((value&0xf000)>>12) > Gpwrdelta)
-				t4 = ((value&0xf000)>>12)-(Gpwrdelta);
-			else
-				t4 = 0;
-		}
-		Gdata = t1 + (t2<<4) + (t3<<8) + (t4<<12);
-
-		RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_20MHZ_2_4G + i*4 + 2, value);
-		if (bApwrdeltaMinus == FALSE)
-		{
-			t1 = (value&0xf)+(Apwrdelta);
-			if (t1 > 0xf)
-				t1 = 0xf;
-			t2 = ((value&0xf0)>>4)+(Apwrdelta);
-			if (t2 > 0xf)
-				t2 = 0xf;
-			t3 = ((value&0xf00)>>8)+(Apwrdelta);
-			if (t3 > 0xf)
-				t3 = 0xf;
-			t4 = ((value&0xf000)>>12)+(Apwrdelta);
-			if (t4 > 0xf)
-				t4 = 0xf;
-		}
-		else
-		{
-			if ((value&0xf) > Apwrdelta)
-				t1 = (value&0xf)-(Apwrdelta);
-			else
-				t1 = 0;
-			if (((value&0xf0)>>4) > Apwrdelta)
-				t2 = ((value&0xf0)>>4)-(Apwrdelta);
-			else
-				t2 = 0;
-			if (((value&0xf00)>>8) > Apwrdelta)
-				t3 = ((value&0xf00)>>8)-(Apwrdelta);
-			else
-				t3 = 0;
-			if (((value&0xf000)>>12) > Apwrdelta)
-				t4 = ((value&0xf000)>>12)-(Apwrdelta);
-			else
-				t4 = 0;
-		}
-		Adata |= ((t1<<16) + (t2<<20) + (t3<<24) + (t4<<28));
-		if (bGpwrdeltaMinus == FALSE)
-		{
-			t1 = (value&0xf)+(Gpwrdelta);
-			if (t1 > 0xf)
-				t1 = 0xf;
-			t2 = ((value&0xf0)>>4)+(Gpwrdelta);
-			if (t2 > 0xf)
-				t2 = 0xf;
-			t3 = ((value&0xf00)>>8)+(Gpwrdelta);
-			if (t3 > 0xf)
-				t3 = 0xf;
-			t4 = ((value&0xf000)>>12)+(Gpwrdelta);
-			if (t4 > 0xf)
-				t4 = 0xf;
-		}
-		else
-		{
-			if ((value&0xf) > Gpwrdelta)
-				t1 = (value&0xf)-(Gpwrdelta);
-			else
-				t1 = 0;
-			if (((value&0xf0)>>4) > Gpwrdelta)
-				t2 = ((value&0xf0)>>4)-(Gpwrdelta);
-			else
-				t2 = 0;
-			if (((value&0xf00)>>8) > Gpwrdelta)
-				t3 = ((value&0xf00)>>8)-(Gpwrdelta);
-			else
-				t3 = 0;
-			if (((value&0xf000)>>12) > Gpwrdelta)
-				t4 = ((value&0xf000)>>12)-(Gpwrdelta);
-			else
-				t4 = 0;
-		}
-		Gdata |= ((t1<<16) + (t2<<20) + (t3<<24) + (t4<<28));
-		data |= (value<<16);
-
-		pAd->Tx20MPwrCfgABand[i] = pAd->Tx40MPwrCfgABand[i] = Adata;
-		pAd->Tx20MPwrCfgGBand[i] = pAd->Tx40MPwrCfgGBand[i] = Gdata;
-
-		if (data != 0xffffffff)
-			RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, data);
-		DBGPRINT_RAW(RT_DEBUG_TRACE, ("20MHz BW, 2.4G band-%lx,  Adata = %lx,  Gdata = %lx \n", data, Adata, Gdata));
-	}
-
-	//
-	// Check this block is valid for 40MHz in 2.4G. If invalid, use parameter for 20MHz in 2.4G
-	//
-	bValid = TRUE;
-	for (i=0; i<6; i++)
-	{
-		RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_40MHZ_2_4G + 2 + i*2, value);
-		if (((value & 0x00FF) == 0x00FF) || ((value & 0xFF00) == 0xFF00))
-		{
-			bValid = FALSE;
-			break;
-		}
-	}
-
-	//
-	// Get Txpower per MCS for 40MHz in 2.4G.
-	//
-	if (bValid)
-	{
-		for (i=0; i<4; i++)
-		{
-			RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_40MHZ_2_4G + i*4, value);
-			if (bGpwrdeltaMinus == FALSE)
-			{
-				t1 = (value&0xf)+(Gpwrdelta);
-				if (t1 > 0xf)
-					t1 = 0xf;
-				t2 = ((value&0xf0)>>4)+(Gpwrdelta);
-				if (t2 > 0xf)
-					t2 = 0xf;
-				t3 = ((value&0xf00)>>8)+(Gpwrdelta);
-				if (t3 > 0xf)
-					t3 = 0xf;
-				t4 = ((value&0xf000)>>12)+(Gpwrdelta);
-				if (t4 > 0xf)
-					t4 = 0xf;
-			}
-			else
-			{
-				if ((value&0xf) > Gpwrdelta)
-					t1 = (value&0xf)-(Gpwrdelta);
-				else
-					t1 = 0;
-				if (((value&0xf0)>>4) > Gpwrdelta)
-					t2 = ((value&0xf0)>>4)-(Gpwrdelta);
-				else
-					t2 = 0;
-				if (((value&0xf00)>>8) > Gpwrdelta)
-					t3 = ((value&0xf00)>>8)-(Gpwrdelta);
-				else
-					t3 = 0;
-				if (((value&0xf000)>>12) > Gpwrdelta)
-					t4 = ((value&0xf000)>>12)-(Gpwrdelta);
-				else
-					t4 = 0;
-			}
-			Gdata = t1 + (t2<<4) + (t3<<8) + (t4<<12);
-
-			RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_40MHZ_2_4G + i*4 + 2, value);
-			if (bGpwrdeltaMinus == FALSE)
-			{
-				t1 = (value&0xf)+(Gpwrdelta);
-				if (t1 > 0xf)
-					t1 = 0xf;
-				t2 = ((value&0xf0)>>4)+(Gpwrdelta);
-				if (t2 > 0xf)
-					t2 = 0xf;
-				t3 = ((value&0xf00)>>8)+(Gpwrdelta);
-				if (t3 > 0xf)
-					t3 = 0xf;
-				t4 = ((value&0xf000)>>12)+(Gpwrdelta);
-				if (t4 > 0xf)
-					t4 = 0xf;
-			}
-			else
-			{
-				if ((value&0xf) > Gpwrdelta)
-					t1 = (value&0xf)-(Gpwrdelta);
-				else
-					t1 = 0;
-				if (((value&0xf0)>>4) > Gpwrdelta)
-					t2 = ((value&0xf0)>>4)-(Gpwrdelta);
-				else
-					t2 = 0;
-				if (((value&0xf00)>>8) > Gpwrdelta)
-					t3 = ((value&0xf00)>>8)-(Gpwrdelta);
-				else
-					t3 = 0;
-				if (((value&0xf000)>>12) > Gpwrdelta)
-					t4 = ((value&0xf000)>>12)-(Gpwrdelta);
-				else
-					t4 = 0;
-			}
-			Gdata |= ((t1<<16) + (t2<<20) + (t3<<24) + (t4<<28));
-
-			if (i == 0)
-				pAd->Tx40MPwrCfgGBand[i+1] = (pAd->Tx40MPwrCfgGBand[i+1] & 0x0000FFFF) | (Gdata & 0xFFFF0000);
-			else
-				pAd->Tx40MPwrCfgGBand[i+1] = Gdata;
-
-			DBGPRINT_RAW(RT_DEBUG_TRACE, ("40MHz BW, 2.4G band, Gdata = %lx \n", Gdata));
-		}
-	}
-
-	//
-	// Check this block is valid for 20MHz in 5G. If invalid, use parameter for 20MHz in 2.4G
-	//
-	bValid = TRUE;
-	for (i=0; i<8; i++)
-	{
-		RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_20MHZ_5G + 2 + i*2, value);
-		if (((value & 0x00FF) == 0x00FF) || ((value & 0xFF00) == 0xFF00))
-		{
-			bValid = FALSE;
-			break;
-		}
-	}
-
-	//
-	// Get Txpower per MCS for 20MHz in 5G.
-	//
-	if (bValid)
-	{
-		for (i=0; i<5; i++)
-		{
-			RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_20MHZ_5G + i*4, value);
-			if (bApwrdeltaMinus == FALSE)
-			{
-				t1 = (value&0xf)+(Apwrdelta);
-				if (t1 > 0xf)
-					t1 = 0xf;
-				t2 = ((value&0xf0)>>4)+(Apwrdelta);
-				if (t2 > 0xf)
-					t2 = 0xf;
-				t3 = ((value&0xf00)>>8)+(Apwrdelta);
-				if (t3 > 0xf)
-					t3 = 0xf;
-				t4 = ((value&0xf000)>>12)+(Apwrdelta);
-				if (t4 > 0xf)
-					t4 = 0xf;
-			}
-			else
-			{
-				if ((value&0xf) > Apwrdelta)
-					t1 = (value&0xf)-(Apwrdelta);
-				else
-					t1 = 0;
-				if (((value&0xf0)>>4) > Apwrdelta)
-					t2 = ((value&0xf0)>>4)-(Apwrdelta);
-				else
-					t2 = 0;
-				if (((value&0xf00)>>8) > Apwrdelta)
-					t3 = ((value&0xf00)>>8)-(Apwrdelta);
-				else
-					t3 = 0;
-				if (((value&0xf000)>>12) > Apwrdelta)
-					t4 = ((value&0xf000)>>12)-(Apwrdelta);
-				else
-					t4 = 0;
-			}
-			Adata = t1 + (t2<<4) + (t3<<8) + (t4<<12);
-
-			RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_20MHZ_5G + i*4 + 2, value);
-			if (bApwrdeltaMinus == FALSE)
-			{
-				t1 = (value&0xf)+(Apwrdelta);
-				if (t1 > 0xf)
-					t1 = 0xf;
-				t2 = ((value&0xf0)>>4)+(Apwrdelta);
-				if (t2 > 0xf)
-					t2 = 0xf;
-				t3 = ((value&0xf00)>>8)+(Apwrdelta);
-				if (t3 > 0xf)
-					t3 = 0xf;
-				t4 = ((value&0xf000)>>12)+(Apwrdelta);
-				if (t4 > 0xf)
-					t4 = 0xf;
-			}
-			else
-			{
-				if ((value&0xf) > Apwrdelta)
-					t1 = (value&0xf)-(Apwrdelta);
-				else
-					t1 = 0;
-				if (((value&0xf0)>>4) > Apwrdelta)
-					t2 = ((value&0xf0)>>4)-(Apwrdelta);
-				else
-					t2 = 0;
-				if (((value&0xf00)>>8) > Apwrdelta)
-					t3 = ((value&0xf00)>>8)-(Apwrdelta);
-				else
-					t3 = 0;
-				if (((value&0xf000)>>12) > Apwrdelta)
-					t4 = ((value&0xf000)>>12)-(Apwrdelta);
-				else
-					t4 = 0;
-			}
-			Adata |= ((t1<<16) + (t2<<20) + (t3<<24) + (t4<<28));
-
-			if (i == 0)
-				pAd->Tx20MPwrCfgABand[i] = (pAd->Tx20MPwrCfgABand[i] & 0x0000FFFF) | (Adata & 0xFFFF0000);
-			else
-				pAd->Tx20MPwrCfgABand[i] = Adata;
-
-			DBGPRINT_RAW(RT_DEBUG_TRACE, ("20MHz BW, 5GHz band, Adata = %lx \n", Adata));
-		}
-	}
-
-	//
-	// Check this block is valid for 40MHz in 5G. If invalid, use parameter for 20MHz in 2.4G
-	//
-	bValid = TRUE;
-	for (i=0; i<6; i++)
-	{
-		RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_40MHZ_5G + 2 + i*2, value);
-		if (((value & 0x00FF) == 0x00FF) || ((value & 0xFF00) == 0xFF00))
-		{
-			bValid = FALSE;
-			break;
-		}
-	}
-
-	//
-	// Get Txpower per MCS for 40MHz in 5G.
-	//
-	if (bValid)
-	{
-		for (i=0; i<4; i++)
-		{
-			RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_40MHZ_5G + i*4, value);
-			if (bApwrdeltaMinus == FALSE)
-			{
-				t1 = (value&0xf)+(Apwrdelta);
-				if (t1 > 0xf)
-					t1 = 0xf;
-				t2 = ((value&0xf0)>>4)+(Apwrdelta);
-				if (t2 > 0xf)
-					t2 = 0xf;
-				t3 = ((value&0xf00)>>8)+(Apwrdelta);
-				if (t3 > 0xf)
-					t3 = 0xf;
-				t4 = ((value&0xf000)>>12)+(Apwrdelta);
-				if (t4 > 0xf)
-					t4 = 0xf;
-			}
-			else
-			{
-				if ((value&0xf) > Apwrdelta)
-					t1 = (value&0xf)-(Apwrdelta);
-				else
-					t1 = 0;
-				if (((value&0xf0)>>4) > Apwrdelta)
-					t2 = ((value&0xf0)>>4)-(Apwrdelta);
-				else
-					t2 = 0;
-				if (((value&0xf00)>>8) > Apwrdelta)
-					t3 = ((value&0xf00)>>8)-(Apwrdelta);
-				else
-					t3 = 0;
-				if (((value&0xf000)>>12) > Apwrdelta)
-					t4 = ((value&0xf000)>>12)-(Apwrdelta);
-				else
-					t4 = 0;
-			}
-			Adata = t1 + (t2<<4) + (t3<<8) + (t4<<12);
-
-			RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_40MHZ_5G + i*4 + 2, value);
-			if (bApwrdeltaMinus == FALSE)
-			{
-				t1 = (value&0xf)+(Apwrdelta);
-				if (t1 > 0xf)
-					t1 = 0xf;
-				t2 = ((value&0xf0)>>4)+(Apwrdelta);
-				if (t2 > 0xf)
-					t2 = 0xf;
-				t3 = ((value&0xf00)>>8)+(Apwrdelta);
-				if (t3 > 0xf)
-					t3 = 0xf;
-				t4 = ((value&0xf000)>>12)+(Apwrdelta);
-				if (t4 > 0xf)
-					t4 = 0xf;
-			}
-			else
-			{
-				if ((value&0xf) > Apwrdelta)
-					t1 = (value&0xf)-(Apwrdelta);
-				else
-					t1 = 0;
-				if (((value&0xf0)>>4) > Apwrdelta)
-					t2 = ((value&0xf0)>>4)-(Apwrdelta);
-				else
-					t2 = 0;
-				if (((value&0xf00)>>8) > Apwrdelta)
-					t3 = ((value&0xf00)>>8)-(Apwrdelta);
-				else
-					t3 = 0;
-				if (((value&0xf000)>>12) > Apwrdelta)
-					t4 = ((value&0xf000)>>12)-(Apwrdelta);
-				else
-					t4 = 0;
-			}
-			Adata |= ((t1<<16) + (t2<<20) + (t3<<24) + (t4<<28));
-
-			if (i == 0)
-				pAd->Tx40MPwrCfgABand[i+1] = (pAd->Tx40MPwrCfgABand[i+1] & 0x0000FFFF) | (Adata & 0xFFFF0000);
-			else
-				pAd->Tx40MPwrCfgABand[i+1] = Adata;
-
-			DBGPRINT_RAW(RT_DEBUG_TRACE, ("40MHz BW, 5GHz band, Adata = %lx \n", Adata));
-		}
-	}
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Read initial channel power parameters from EEPROM
-
-	Arguments:
-		Adapter						Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPReadChannelPwr(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	UCHAR				i, choffset;
-	EEPROM_TX_PWR_STRUC	    Power;
-	EEPROM_TX_PWR_STRUC	    Power2;
-
-	// Read Tx power value for all channels
-	// Value from 1 - 0x7f. Default value is 24.
-	// Power value : 2.4G 0x00 (0) ~ 0x1F (31)
-	//             : 5.5G 0xF9 (-7) ~ 0x0F (15)
-
-	// 0. 11b/g, ch1 - ch 14
-	for (i = 0; i < 7; i++)
-	{
-//		Power.word = RTMP_EEPROM_READ16(pAd, EEPROM_G_TX_PWR_OFFSET + i * 2);
-//		Power2.word = RTMP_EEPROM_READ16(pAd, EEPROM_G_TX2_PWR_OFFSET + i * 2);
-		RT28xx_EEPROM_READ16(pAd, EEPROM_G_TX_PWR_OFFSET + i * 2, Power.word);
-		RT28xx_EEPROM_READ16(pAd, EEPROM_G_TX2_PWR_OFFSET + i * 2, Power2.word);
-		pAd->TxPower[i * 2].Channel = i * 2 + 1;
-		pAd->TxPower[i * 2 + 1].Channel = i * 2 + 2;
-
-		if ((Power.field.Byte0 > 31) || (Power.field.Byte0 < 0))
-			pAd->TxPower[i * 2].Power = DEFAULT_RF_TX_POWER;
-		else
-			pAd->TxPower[i * 2].Power = Power.field.Byte0;
-
-		if ((Power.field.Byte1 > 31) || (Power.field.Byte1 < 0))
-			pAd->TxPower[i * 2 + 1].Power = DEFAULT_RF_TX_POWER;
-		else
-			pAd->TxPower[i * 2 + 1].Power = Power.field.Byte1;
-
-		if ((Power2.field.Byte0 > 31) || (Power2.field.Byte0 < 0))
-			pAd->TxPower[i * 2].Power2 = DEFAULT_RF_TX_POWER;
-		else
-			pAd->TxPower[i * 2].Power2 = Power2.field.Byte0;
-
-		if ((Power2.field.Byte1 > 31) || (Power2.field.Byte1 < 0))
-			pAd->TxPower[i * 2 + 1].Power2 = DEFAULT_RF_TX_POWER;
-		else
-			pAd->TxPower[i * 2 + 1].Power2 = Power2.field.Byte1;
-	}
-
-	// 1. U-NII lower/middle band: 36, 38, 40; 44, 46, 48; 52, 54, 56; 60, 62, 64 (including central frequency in BW 40MHz)
-	// 1.1 Fill up channel
-	choffset = 14;
-	for (i = 0; i < 4; i++)
-	{
-		pAd->TxPower[3 * i + choffset + 0].Channel	= 36 + i * 8 + 0;
-		pAd->TxPower[3 * i + choffset + 0].Power	= DEFAULT_RF_TX_POWER;
-		pAd->TxPower[3 * i + choffset + 0].Power2	= DEFAULT_RF_TX_POWER;
-
-		pAd->TxPower[3 * i + choffset + 1].Channel	= 36 + i * 8 + 2;
-		pAd->TxPower[3 * i + choffset + 1].Power	= DEFAULT_RF_TX_POWER;
-		pAd->TxPower[3 * i + choffset + 1].Power2	= DEFAULT_RF_TX_POWER;
-
-		pAd->TxPower[3 * i + choffset + 2].Channel	= 36 + i * 8 + 4;
-		pAd->TxPower[3 * i + choffset + 2].Power	= DEFAULT_RF_TX_POWER;
-		pAd->TxPower[3 * i + choffset + 2].Power2	= DEFAULT_RF_TX_POWER;
-	}
-
-	// 1.2 Fill up power
-	for (i = 0; i < 6; i++)
-	{
-//		Power.word = RTMP_EEPROM_READ16(pAd, EEPROM_A_TX_PWR_OFFSET + i * 2);
-//		Power2.word = RTMP_EEPROM_READ16(pAd, EEPROM_A_TX2_PWR_OFFSET + i * 2);
-		RT28xx_EEPROM_READ16(pAd, EEPROM_A_TX_PWR_OFFSET + i * 2, Power.word);
-		RT28xx_EEPROM_READ16(pAd, EEPROM_A_TX2_PWR_OFFSET + i * 2, Power2.word);
-
-		if ((Power.field.Byte0 < 16) && (Power.field.Byte0 >= -7))
-			pAd->TxPower[i * 2 + choffset + 0].Power = Power.field.Byte0;
-
-		if ((Power.field.Byte1 < 16) && (Power.field.Byte1 >= -7))
-			pAd->TxPower[i * 2 + choffset + 1].Power = Power.field.Byte1;
-
-		if ((Power2.field.Byte0 < 16) && (Power2.field.Byte0 >= -7))
-			pAd->TxPower[i * 2 + choffset + 0].Power2 = Power2.field.Byte0;
-
-		if ((Power2.field.Byte1 < 16) && (Power2.field.Byte1 >= -7))
-			pAd->TxPower[i * 2 + choffset + 1].Power2 = Power2.field.Byte1;
-	}
-
-	// 2. HipperLAN 2 100, 102 ,104; 108, 110, 112; 116, 118, 120; 124, 126, 128; 132, 134, 136; 140 (including central frequency in BW 40MHz)
-	// 2.1 Fill up channel
-	choffset = 14 + 12;
-	for (i = 0; i < 5; i++)
-	{
-		pAd->TxPower[3 * i + choffset + 0].Channel	= 100 + i * 8 + 0;
-		pAd->TxPower[3 * i + choffset + 0].Power	= DEFAULT_RF_TX_POWER;
-		pAd->TxPower[3 * i + choffset + 0].Power2	= DEFAULT_RF_TX_POWER;
-
-		pAd->TxPower[3 * i + choffset + 1].Channel	= 100 + i * 8 + 2;
-		pAd->TxPower[3 * i + choffset + 1].Power	= DEFAULT_RF_TX_POWER;
-		pAd->TxPower[3 * i + choffset + 1].Power2	= DEFAULT_RF_TX_POWER;
-
-		pAd->TxPower[3 * i + choffset + 2].Channel	= 100 + i * 8 + 4;
-		pAd->TxPower[3 * i + choffset + 2].Power	= DEFAULT_RF_TX_POWER;
-		pAd->TxPower[3 * i + choffset + 2].Power2	= DEFAULT_RF_TX_POWER;
-	}
-	pAd->TxPower[3 * 5 + choffset + 0].Channel		= 140;
-	pAd->TxPower[3 * 5 + choffset + 0].Power		= DEFAULT_RF_TX_POWER;
-	pAd->TxPower[3 * 5 + choffset + 0].Power2		= DEFAULT_RF_TX_POWER;
-
-	// 2.2 Fill up power
-	for (i = 0; i < 8; i++)
-	{
-//		Power.word = RTMP_EEPROM_READ16(pAd, EEPROM_A_TX_PWR_OFFSET + (choffset - 14) + i * 2);
-//		Power2.word = RTMP_EEPROM_READ16(pAd, EEPROM_A_TX2_PWR_OFFSET + (choffset - 14) + i * 2);
-		RT28xx_EEPROM_READ16(pAd, EEPROM_A_TX_PWR_OFFSET + (choffset - 14) + i * 2, Power.word);
-		RT28xx_EEPROM_READ16(pAd, EEPROM_A_TX2_PWR_OFFSET + (choffset - 14) + i * 2, Power2.word);
-
-		if ((Power.field.Byte0 < 16) && (Power.field.Byte0 >= -7))
-			pAd->TxPower[i * 2 + choffset + 0].Power = Power.field.Byte0;
-
-		if ((Power.field.Byte1 < 16) && (Power.field.Byte1 >= -7))
-			pAd->TxPower[i * 2 + choffset + 1].Power = Power.field.Byte1;
-
-		if ((Power2.field.Byte0 < 16) && (Power2.field.Byte0 >= -7))
-			pAd->TxPower[i * 2 + choffset + 0].Power2 = Power2.field.Byte0;
-
-		if ((Power2.field.Byte1 < 16) && (Power2.field.Byte1 >= -7))
-			pAd->TxPower[i * 2 + choffset + 1].Power2 = Power2.field.Byte1;
-	}
-
-	// 3. U-NII upper band: 149, 151, 153; 157, 159, 161; 165 (including central frequency in BW 40MHz)
-	// 3.1 Fill up channel
-	choffset = 14 + 12 + 16;
-	for (i = 0; i < 2; i++)
-	{
-		pAd->TxPower[3 * i + choffset + 0].Channel	= 149 + i * 8 + 0;
-		pAd->TxPower[3 * i + choffset + 0].Power	= DEFAULT_RF_TX_POWER;
-		pAd->TxPower[3 * i + choffset + 0].Power2	= DEFAULT_RF_TX_POWER;
-
-		pAd->TxPower[3 * i + choffset + 1].Channel	= 149 + i * 8 + 2;
-		pAd->TxPower[3 * i + choffset + 1].Power	= DEFAULT_RF_TX_POWER;
-		pAd->TxPower[3 * i + choffset + 1].Power2	= DEFAULT_RF_TX_POWER;
-
-		pAd->TxPower[3 * i + choffset + 2].Channel	= 149 + i * 8 + 4;
-		pAd->TxPower[3 * i + choffset + 2].Power	= DEFAULT_RF_TX_POWER;
-		pAd->TxPower[3 * i + choffset + 2].Power2	= DEFAULT_RF_TX_POWER;
-	}
-	pAd->TxPower[3 * 2 + choffset + 0].Channel		= 165;
-	pAd->TxPower[3 * 2 + choffset + 0].Power		= DEFAULT_RF_TX_POWER;
-	pAd->TxPower[3 * 2 + choffset + 0].Power2		= DEFAULT_RF_TX_POWER;
-
-	// 3.2 Fill up power
-	for (i = 0; i < 4; i++)
-	{
-//		Power.word = RTMP_EEPROM_READ16(pAd, EEPROM_A_TX_PWR_OFFSET + (choffset - 14) + i * 2);
-//		Power2.word = RTMP_EEPROM_READ16(pAd, EEPROM_A_TX2_PWR_OFFSET + (choffset - 14) + i * 2);
-		RT28xx_EEPROM_READ16(pAd, EEPROM_A_TX_PWR_OFFSET + (choffset - 14) + i * 2, Power.word);
-		RT28xx_EEPROM_READ16(pAd, EEPROM_A_TX2_PWR_OFFSET + (choffset - 14) + i * 2, Power2.word);
-
-		if ((Power.field.Byte0 < 16) && (Power.field.Byte0 >= -7))
-			pAd->TxPower[i * 2 + choffset + 0].Power = Power.field.Byte0;
-
-		if ((Power.field.Byte1 < 16) && (Power.field.Byte1 >= -7))
-			pAd->TxPower[i * 2 + choffset + 1].Power = Power.field.Byte1;
-
-		if ((Power2.field.Byte0 < 16) && (Power2.field.Byte0 >= -7))
-			pAd->TxPower[i * 2 + choffset + 0].Power2 = Power2.field.Byte0;
-
-		if ((Power2.field.Byte1 < 16) && (Power2.field.Byte1 >= -7))
-			pAd->TxPower[i * 2 + choffset + 1].Power2 = Power2.field.Byte1;
-	}
-
-	// 4. Print and Debug
-	choffset = 14 + 12 + 16 + 7;
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Read the following from the registry
-		1. All the parameters
-		2. NetworkAddres
-
-	Arguments:
-		Adapter						Pointer to our adapter
-		WrapperConfigurationContext	For use by NdisOpenConfiguration
-
-	Return Value:
-		NDIS_STATUS_SUCCESS
-		NDIS_STATUS_FAILURE
-		NDIS_STATUS_RESOURCES
-
-	IRQL = PASSIVE_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-NDIS_STATUS	NICReadRegParameters(
-	IN	PRTMP_ADAPTER		pAd,
-	IN	NDIS_HANDLE			WrapperConfigurationContext
-	)
-{
-	NDIS_STATUS						Status = NDIS_STATUS_SUCCESS;
-	DBGPRINT_S(Status, ("<-- NICReadRegParameters, Status=%x\n", Status));
-	return Status;
-}
-
-
-#ifdef RT30xx
-/*
-	========================================================================
-
-	Routine Description:
-		For RF filter calibration purpose
-
-	Arguments:
-		pAd                          Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-
-	========================================================================
-*/
-VOID RTMPFilterCalibration(
-	IN PRTMP_ADAPTER pAd)
-{
-	UCHAR	R55x = 0, value, FilterTarget = 0x1E, BBPValue=0;
-	UINT	loop = 0, count = 0, loopcnt = 0, ReTry = 0;
-	UCHAR	RF_R24_Value = 0;
-
-	// Give bbp filter initial value
-	pAd->Mlme.CaliBW20RfR24 = 0x1F;
-	pAd->Mlme.CaliBW40RfR24 = 0x2F; //Bit[5] must be 1 for BW 40
-
-	do
-	{
-		if (loop == 1)	//BandWidth = 40 MHz
-		{
-			// Write 0x27 to RF_R24 to program filter
-			RF_R24_Value = 0x27;
-			RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
-			if (IS_RT3090(pAd))
-				FilterTarget = 0x15;
-			else
-				FilterTarget = 0x19;
-
-			// when calibrate BW40, BBP mask must set to BW40.
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
-			BBPValue&= (~0x18);
-			BBPValue|= (0x10);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
-
-			// set to BW40
-			RT30xxReadRFRegister(pAd, RF_R31, &value);
-			value |= 0x20;
-			RT30xxWriteRFRegister(pAd, RF_R31, value);
-		}
-		else			//BandWidth = 20 MHz
-		{
-			// Write 0x07 to RF_R24 to program filter
-			RF_R24_Value = 0x07;
-			RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
-			if (IS_RT3090(pAd))
-				FilterTarget = 0x13;
-			else
-				FilterTarget = 0x16;
-
-			// set to BW20
-			RT30xxReadRFRegister(pAd, RF_R31, &value);
-			value &= (~0x20);
-			RT30xxWriteRFRegister(pAd, RF_R31, value);
-		}
-
-		// Write 0x01 to RF_R22 to enable baseband loopback mode
-		RT30xxReadRFRegister(pAd, RF_R22, &value);
-		value |= 0x01;
-		RT30xxWriteRFRegister(pAd, RF_R22, value);
-
-		// Write 0x00 to BBP_R24 to set power & frequency of passband test tone
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0);
-
-		do
-		{
-			// Write 0x90 to BBP_R25 to transmit test tone
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R25, 0x90);
-
-			RTMPusecDelay(1000);
-			// Read BBP_R55[6:0] for received power, set R55x = BBP_R55[6:0]
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R55, &value);
-			R55x = value & 0xFF;
-
-		} while ((ReTry++ < 100) && (R55x == 0));
-
-		// Write 0x06 to BBP_R24 to set power & frequency of stopband test tone
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0x06);
-
-		while(TRUE)
-		{
-			// Write 0x90 to BBP_R25 to transmit test tone
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R25, 0x90);
-
-			//We need to wait for calibration
-			RTMPusecDelay(1000);
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R55, &value);
-			value &= 0xFF;
-			if ((R55x - value) < FilterTarget)
-			{
-				RF_R24_Value ++;
-			}
-			else if ((R55x - value) == FilterTarget)
-			{
-				RF_R24_Value ++;
-				count ++;
-			}
-			else
-			{
-				break;
-			}
-
-			// prevent infinite loop cause driver hang.
-			if (loopcnt++ > 100)
-			{
-				DBGPRINT(RT_DEBUG_ERROR, ("RTMPFilterCalibration - can't find a valid value, loopcnt=%d stop calibrating", loopcnt));
-				break;
-			}
-
-			// Write RF_R24 to program filter
-			RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
-		}
-
-		if (count > 0)
-		{
-			RF_R24_Value = RF_R24_Value - ((count) ? (1) : (0));
-		}
-
-		// Store for future usage
-		if (loopcnt < 100)
-		{
-			if (loop++ == 0)
-			{
-				//BandWidth = 20 MHz
-				pAd->Mlme.CaliBW20RfR24 = (UCHAR)RF_R24_Value;
-			}
-			else
-			{
-				//BandWidth = 40 MHz
-				pAd->Mlme.CaliBW40RfR24 = (UCHAR)RF_R24_Value;
-				break;
-			}
-		}
-		else
-			break;
-
-		RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
-
-		// reset count
-		count = 0;
-	} while(TRUE);
-
-	//
-	// Set back to initial state
-	//
-	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0);
-
-	RT30xxReadRFRegister(pAd, RF_R22, &value);
-	value &= ~(0x01);
-	RT30xxWriteRFRegister(pAd, RF_R22, value);
-
-	// set BBP back to BW20
-	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
-	BBPValue&= (~0x18);
-	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("RTMPFilterCalibration - CaliBW20RfR24=0x%x, CaliBW40RfR24=0x%x\n", pAd->Mlme.CaliBW20RfR24, pAd->Mlme.CaliBW40RfR24));
-}
-#endif // RT30xx //
-
-
-#ifdef RT3070
-VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd)
-{
-	INT i;
-	// Driver must read EEPROM to get RfIcType before initial RF registers
-	// Initialize RF register to default value
-	if (IS_RT3070(pAd) || IS_RT3071(pAd))
-	{
-		// Init RF calibration
-		// Driver should toggle RF R30 bit7 before init RF registers
-		UINT32 RfReg = 0;
-		UINT32 data;
-
-		RT30xxReadRFRegister(pAd, RF_R30, (PUCHAR)&RfReg);
-		RfReg |= 0x80;
-		RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg);
-		RTMPusecDelay(1000);
-		RfReg &= 0x7F;
-		RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg);
-
-		// Initialize RF register to default value
-		for (i = 0; i < NUM_RF_REG_PARMS; i++)
-		{
-			RT30xxWriteRFRegister(pAd, RT30xx_RFRegTable[i].Register, RT30xx_RFRegTable[i].Value);
-		}
-
-		// add by johnli
-		if (IS_RT3070(pAd))
-		{
-			//  Update MAC 0x05D4 from 01xxxxxx to 0Dxxxxxx (voltage 1.2V to 1.35V) for RT3070 to improve yield rate
-			RTUSBReadMACRegister(pAd, LDO_CFG0, &data);
-			data = ((data & 0xF0FFFFFF) | 0x0D000000);
-			RTUSBWriteMACRegister(pAd, LDO_CFG0, data);
-		}
-		else if (IS_RT3071(pAd))
-		{
-			// Driver should set RF R6 bit6 on before init RF registers
-			RT30xxReadRFRegister(pAd, RF_R06, (PUCHAR)&RfReg);
-			RfReg |= 0x40;
-			RT30xxWriteRFRegister(pAd, RF_R06, (UCHAR)RfReg);
-
-			// init R31
-			RT30xxWriteRFRegister(pAd, RF_R31, 0x14);
-
-			// RT3071 version E has fixed this issue
-			if ((pAd->NicConfig2.field.DACTestBit == 1) && ((pAd->MACVersion & 0xffff) < 0x0211))
-			{
-				// patch tx EVM issue temporarily
-				RTUSBReadMACRegister(pAd, LDO_CFG0, &data);
-				data = ((data & 0xE0FFFFFF) | 0x0D000000);
-				RTUSBWriteMACRegister(pAd, LDO_CFG0, data);
-			}
-			else
-			{
-				RTMP_IO_READ32(pAd, LDO_CFG0, &data);
-				data = ((data & 0xE0FFFFFF) | 0x01000000);
-				RTMP_IO_WRITE32(pAd, LDO_CFG0, data);
-			}
-
-			// patch LNA_PE_G1 failed issue
-			RTUSBReadMACRegister(pAd, GPIO_SWITCH, &data);
-			data &= ~(0x20);
-			RTUSBWriteMACRegister(pAd, GPIO_SWITCH, data);
-		}
-
-		//For RF filter Calibration
-		RTMPFilterCalibration(pAd);
-
-		// Initialize RF R27 register, set RF R27 must be behind RTMPFilterCalibration()
-		if ((pAd->MACVersion & 0xffff) < 0x0211)
-			RT30xxWriteRFRegister(pAd, RF_R27, 0x3);
-
-		// set led open drain enable
-		RTUSBReadMACRegister(pAd, OPT_14, &data);
-		data |= 0x01;
-		RTUSBWriteMACRegister(pAd, OPT_14, data);
-
-		if (IS_RT3071(pAd))
-		{
-			// add by johnli, RF power sequence setup, load RF normal operation-mode setup
-			RT30xxLoadRFNormalModeSetup(pAd);
-		}
-	}
-
-}
-#endif // RT3070 //
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Read initial parameters from EEPROM
-
-	Arguments:
-		Adapter						Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	NICReadEEPROMParameters(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			mac_addr)
-{
-	UINT32			data = 0;
-	USHORT			i, value, value2;
-	UCHAR			TmpPhy;
-	EEPROM_TX_PWR_STRUC	    Power;
-	EEPROM_VERSION_STRUC    Version;
-	EEPROM_ANTENNA_STRUC	Antenna;
-	EEPROM_NIC_CONFIG2_STRUC    NicConfig2;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("--> NICReadEEPROMParameters\n"));
-
-	// Init EEPROM Address Number, before access EEPROM; if 93c46, EEPROMAddressNum=6, else if 93c66, EEPROMAddressNum=8
-	RTMP_IO_READ32(pAd, E2PROM_CSR, &data);
-	DBGPRINT(RT_DEBUG_TRACE, ("--> E2PROM_CSR = 0x%x\n", data));
-
-	if((data & 0x30) == 0)
-		pAd->EEPROMAddressNum = 6;		// 93C46
-	else if((data & 0x30) == 0x10)
-		pAd->EEPROMAddressNum = 8;     // 93C66
-	else
-		pAd->EEPROMAddressNum = 8;     // 93C86
-	DBGPRINT(RT_DEBUG_TRACE, ("--> EEPROMAddressNum = %d\n", pAd->EEPROMAddressNum ));
-
-	// RT2860 MAC no longer auto load MAC address from E2PROM. Driver has to intialize
-	// MAC address registers according to E2PROM setting
-	if (mac_addr == NULL ||
-		strlen(mac_addr) != 17 ||
-		mac_addr[2] != ':'  || mac_addr[5] != ':'  || mac_addr[8] != ':' ||
-		mac_addr[11] != ':' || mac_addr[14] != ':')
-	{
-		USHORT  Addr01,Addr23,Addr45 ;
-
-		RT28xx_EEPROM_READ16(pAd, 0x04, Addr01);
-		RT28xx_EEPROM_READ16(pAd, 0x06, Addr23);
-		RT28xx_EEPROM_READ16(pAd, 0x08, Addr45);
-
-		pAd->PermanentAddress[0] = (UCHAR)(Addr01 & 0xff);
-		pAd->PermanentAddress[1] = (UCHAR)(Addr01 >> 8);
-		pAd->PermanentAddress[2] = (UCHAR)(Addr23 & 0xff);
-		pAd->PermanentAddress[3] = (UCHAR)(Addr23 >> 8);
-		pAd->PermanentAddress[4] = (UCHAR)(Addr45 & 0xff);
-		pAd->PermanentAddress[5] = (UCHAR)(Addr45 >> 8);
-
-		DBGPRINT(RT_DEBUG_TRACE, ("Initialize MAC Address from E2PROM \n"));
-	}
-	else
-	{
-		INT		j;
-		PUCHAR	macptr;
-
-		macptr = mac_addr;
-
-		for (j=0; j<MAC_ADDR_LEN; j++)
-		{
-			AtoH(macptr, &pAd->PermanentAddress[j], 1);
-			macptr=macptr+3;
-		}
-
-		DBGPRINT(RT_DEBUG_TRACE, ("Initialize MAC Address from module parameter \n"));
-	}
-
-
-	{
-		//more conveninet to test mbssid, so ap's bssid &0xf1
-		if (pAd->PermanentAddress[0] == 0xff)
-			pAd->PermanentAddress[0] = RandomByte(pAd)&0xf8;
-
-		//if (pAd->PermanentAddress[5] == 0xff)
-		//	pAd->PermanentAddress[5] = RandomByte(pAd)&0xf8;
-
-		DBGPRINT_RAW(RT_DEBUG_TRACE,("E2PROM MAC: =%02x:%02x:%02x:%02x:%02x:%02x\n",
-			pAd->PermanentAddress[0], pAd->PermanentAddress[1],
-			pAd->PermanentAddress[2], pAd->PermanentAddress[3],
-			pAd->PermanentAddress[4], pAd->PermanentAddress[5]));
-		if (pAd->bLocalAdminMAC == FALSE)
-		{
-			MAC_DW0_STRUC csr2;
-			MAC_DW1_STRUC csr3;
-			COPY_MAC_ADDR(pAd->CurrentAddress, pAd->PermanentAddress);
-			csr2.field.Byte0 = pAd->CurrentAddress[0];
-			csr2.field.Byte1 = pAd->CurrentAddress[1];
-			csr2.field.Byte2 = pAd->CurrentAddress[2];
-			csr2.field.Byte3 = pAd->CurrentAddress[3];
-			RTMP_IO_WRITE32(pAd, MAC_ADDR_DW0, csr2.word);
-			csr3.word = 0;
-			csr3.field.Byte4 = pAd->CurrentAddress[4];
-			csr3.field.Byte5 = pAd->CurrentAddress[5];
-			csr3.field.U2MeMask = 0xff;
-			RTMP_IO_WRITE32(pAd, MAC_ADDR_DW1, csr3.word);
-			DBGPRINT_RAW(RT_DEBUG_TRACE,("E2PROM MAC: =%02x:%02x:%02x:%02x:%02x:%02x\n",
-				pAd->PermanentAddress[0], pAd->PermanentAddress[1],
-				pAd->PermanentAddress[2], pAd->PermanentAddress[3],
-				pAd->PermanentAddress[4], pAd->PermanentAddress[5]));
-		}
-	}
-
-	// if not return early. cause fail at emulation.
-	// Init the channel number for TX channel power
-	RTMPReadChannelPwr(pAd);
-
-	// if E2PROM version mismatch with driver's expectation, then skip
-	// all subsequent E2RPOM retieval and set a system error bit to notify GUI
-	RT28xx_EEPROM_READ16(pAd, EEPROM_VERSION_OFFSET, Version.word);
-	pAd->EepromVersion = Version.field.Version + Version.field.FaeReleaseNumber * 256;
-	DBGPRINT(RT_DEBUG_TRACE, ("E2PROM: Version = %d, FAE release #%d\n", Version.field.Version, Version.field.FaeReleaseNumber));
-
-	if (Version.field.Version > VALID_EEPROM_VERSION)
-	{
-		DBGPRINT_ERR(("E2PROM: WRONG VERSION 0x%x, should be %d\n",Version.field.Version, VALID_EEPROM_VERSION));
-		/*pAd->SystemErrorBitmap |= 0x00000001;
-
-		// hard-code default value when no proper E2PROM installed
-		pAd->bAutoTxAgcA = FALSE;
-		pAd->bAutoTxAgcG = FALSE;
-
-		// Default the channel power
-		for (i = 0; i < MAX_NUM_OF_CHANNELS; i++)
-			pAd->TxPower[i].Power = DEFAULT_RF_TX_POWER;
-
-		// Default the channel power
-		for (i = 0; i < MAX_NUM_OF_11JCHANNELS; i++)
-			pAd->TxPower11J[i].Power = DEFAULT_RF_TX_POWER;
-
-		for(i = 0; i < NUM_EEPROM_BBP_PARMS; i++)
-			pAd->EEPROMDefaultValue[i] = 0xffff;
-		return;  */
-	}
-
-	// Read BBP default value from EEPROM and store to array(EEPROMDefaultValue) in pAd
-	RT28xx_EEPROM_READ16(pAd, EEPROM_NIC1_OFFSET, value);
-	pAd->EEPROMDefaultValue[0] = value;
-
-	RT28xx_EEPROM_READ16(pAd, EEPROM_NIC2_OFFSET, value);
-	pAd->EEPROMDefaultValue[1] = value;
-
-	RT28xx_EEPROM_READ16(pAd, 0x38, value);	// Country Region
-	pAd->EEPROMDefaultValue[2] = value;
-
-	for(i = 0; i < 8; i++)
-	{
-		RT28xx_EEPROM_READ16(pAd, EEPROM_BBP_BASE_OFFSET + i*2, value);
-		pAd->EEPROMDefaultValue[i+3] = value;
-	}
-
-	// We have to parse NIC configuration 0 at here.
-	// If TSSI did not have preloaded value, it should reset the TxAutoAgc to false
-	// Therefore, we have to read TxAutoAgc control beforehand.
-	// Read Tx AGC control bit
-	Antenna.word = pAd->EEPROMDefaultValue[0];
-	if (Antenna.word == 0xFFFF)
-	{
-#ifdef RT30xx
-		if(IS_RT3090(pAd))
-		{
-			Antenna.word = 0;
-			Antenna.field.RfIcType = RFIC_3020;
-			Antenna.field.TxPath = 1;
-			Antenna.field.RxPath = 1;
-		}
-		else
-		{
-#endif // RT30xx //
-			Antenna.word = 0;
-			Antenna.field.RfIcType = RFIC_2820;
-			Antenna.field.TxPath = 1;
-			Antenna.field.RxPath = 2;
-			DBGPRINT(RT_DEBUG_WARN, ("E2PROM error, hard code as 0x%04x\n", Antenna.word));
-#ifdef RT30xx
-		}
-#endif // RT30xx //
-	}
-
-	// Choose the desired Tx&Rx stream.
-	if ((pAd->CommonCfg.TxStream == 0) || (pAd->CommonCfg.TxStream > Antenna.field.TxPath))
-		pAd->CommonCfg.TxStream = Antenna.field.TxPath;
-
-	if ((pAd->CommonCfg.RxStream == 0) || (pAd->CommonCfg.RxStream > Antenna.field.RxPath))
-	{
-		pAd->CommonCfg.RxStream = Antenna.field.RxPath;
-
-		if ((pAd->MACVersion < RALINK_2883_VERSION) &&
-			(pAd->CommonCfg.RxStream > 2))
-		{
-			// only 2 Rx streams for RT2860 series
-			pAd->CommonCfg.RxStream = 2;
-		}
-	}
-
-	// 3*3
-	// read value from EEPROM and set them to CSR174 ~ 177 in chain0 ~ chain2
-	// yet implement
-	for(i=0; i<3; i++)
-	{
-	}
-
-	NicConfig2.word = pAd->EEPROMDefaultValue[1];
-
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if ((NicConfig2.word & 0x00ff) == 0xff)
-		{
-			NicConfig2.word &= 0xff00;
-		}
-
-		if ((NicConfig2.word >> 8) == 0xff)
-		{
-			NicConfig2.word &= 0x00ff;
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	if (NicConfig2.field.DynamicTxAgcControl == 1)
-		pAd->bAutoTxAgcA = pAd->bAutoTxAgcG = TRUE;
-	else
-		pAd->bAutoTxAgcA = pAd->bAutoTxAgcG = FALSE;
-
-	DBGPRINT_RAW(RT_DEBUG_TRACE, ("NICReadEEPROMParameters: RxPath = %d, TxPath = %d\n", Antenna.field.RxPath, Antenna.field.TxPath));
-
-	// Save the antenna for future use
-	pAd->Antenna.word = Antenna.word;
-
-	//
-	// Reset PhyMode if we don't support 802.11a
-	// Only RFIC_2850 & RFIC_2750 support 802.11a
-	//
-	if ((Antenna.field.RfIcType != RFIC_2850) && (Antenna.field.RfIcType != RFIC_2750))
-	{
-		if ((pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED) ||
-			(pAd->CommonCfg.PhyMode == PHY_11A))
-			pAd->CommonCfg.PhyMode = PHY_11BG_MIXED;
-#ifdef DOT11_N_SUPPORT
-		else if ((pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED)	||
-				 (pAd->CommonCfg.PhyMode == PHY_11AN_MIXED) 	||
-				 (pAd->CommonCfg.PhyMode == PHY_11AGN_MIXED) 	||
-				 (pAd->CommonCfg.PhyMode == PHY_11N_5G))
-			pAd->CommonCfg.PhyMode = PHY_11BGN_MIXED;
-#endif // DOT11_N_SUPPORT //
-	}
-
-	// Read TSSI reference and TSSI boundary for temperature compensation. This is ugly
-	// 0. 11b/g
-	{
-		/* these are tempature reference value (0x00 ~ 0xFE)
-		   ex: 0x00 0x15 0x25 0x45 0x88 0xA0 0xB5 0xD0 0xF0
-		   TssiPlusBoundaryG [4] [3] [2] [1] [0] (smaller) +
-		   TssiMinusBoundaryG[0] [1] [2] [3] [4] (larger) */
-		RT28xx_EEPROM_READ16(pAd, 0x6E, Power.word);
-		pAd->TssiMinusBoundaryG[4] = Power.field.Byte0;
-		pAd->TssiMinusBoundaryG[3] = Power.field.Byte1;
-		RT28xx_EEPROM_READ16(pAd, 0x70, Power.word);
-		pAd->TssiMinusBoundaryG[2] = Power.field.Byte0;
-		pAd->TssiMinusBoundaryG[1] = Power.field.Byte1;
-		RT28xx_EEPROM_READ16(pAd, 0x72, Power.word);
-		pAd->TssiRefG   = Power.field.Byte0; /* reference value [0] */
-		pAd->TssiPlusBoundaryG[1] = Power.field.Byte1;
-		RT28xx_EEPROM_READ16(pAd, 0x74, Power.word);
-		pAd->TssiPlusBoundaryG[2] = Power.field.Byte0;
-		pAd->TssiPlusBoundaryG[3] = Power.field.Byte1;
-		RT28xx_EEPROM_READ16(pAd, 0x76, Power.word);
-		pAd->TssiPlusBoundaryG[4] = Power.field.Byte0;
-		pAd->TxAgcStepG = Power.field.Byte1;
-		pAd->TxAgcCompensateG = 0;
-		pAd->TssiMinusBoundaryG[0] = pAd->TssiRefG;
-		pAd->TssiPlusBoundaryG[0]  = pAd->TssiRefG;
-
-		// Disable TxAgc if the based value is not right
-		if (pAd->TssiRefG == 0xff)
-			pAd->bAutoTxAgcG = FALSE;
-
-		DBGPRINT(RT_DEBUG_TRACE,("E2PROM: G Tssi[-4 .. +4] = %d %d %d %d - %d -%d %d %d %d, step=%d, tuning=%d\n",
-			pAd->TssiMinusBoundaryG[4], pAd->TssiMinusBoundaryG[3], pAd->TssiMinusBoundaryG[2], pAd->TssiMinusBoundaryG[1],
-			pAd->TssiRefG,
-			pAd->TssiPlusBoundaryG[1], pAd->TssiPlusBoundaryG[2], pAd->TssiPlusBoundaryG[3], pAd->TssiPlusBoundaryG[4],
-			pAd->TxAgcStepG, pAd->bAutoTxAgcG));
-	}
-	// 1. 11a
-	{
-		RT28xx_EEPROM_READ16(pAd, 0xD4, Power.word);
-		pAd->TssiMinusBoundaryA[4] = Power.field.Byte0;
-		pAd->TssiMinusBoundaryA[3] = Power.field.Byte1;
-		RT28xx_EEPROM_READ16(pAd, 0xD6, Power.word);
-		pAd->TssiMinusBoundaryA[2] = Power.field.Byte0;
-		pAd->TssiMinusBoundaryA[1] = Power.field.Byte1;
-		RT28xx_EEPROM_READ16(pAd, 0xD8, Power.word);
-		pAd->TssiRefA   = Power.field.Byte0;
-		pAd->TssiPlusBoundaryA[1] = Power.field.Byte1;
-		RT28xx_EEPROM_READ16(pAd, 0xDA, Power.word);
-		pAd->TssiPlusBoundaryA[2] = Power.field.Byte0;
-		pAd->TssiPlusBoundaryA[3] = Power.field.Byte1;
-		RT28xx_EEPROM_READ16(pAd, 0xDC, Power.word);
-		pAd->TssiPlusBoundaryA[4] = Power.field.Byte0;
-		pAd->TxAgcStepA = Power.field.Byte1;
-		pAd->TxAgcCompensateA = 0;
-		pAd->TssiMinusBoundaryA[0] = pAd->TssiRefA;
-		pAd->TssiPlusBoundaryA[0]  = pAd->TssiRefA;
-
-		// Disable TxAgc if the based value is not right
-		if (pAd->TssiRefA == 0xff)
-			pAd->bAutoTxAgcA = FALSE;
-
-		DBGPRINT(RT_DEBUG_TRACE,("E2PROM: A Tssi[-4 .. +4] = %d %d %d %d - %d -%d %d %d %d, step=%d, tuning=%d\n",
-			pAd->TssiMinusBoundaryA[4], pAd->TssiMinusBoundaryA[3], pAd->TssiMinusBoundaryA[2], pAd->TssiMinusBoundaryA[1],
-			pAd->TssiRefA,
-			pAd->TssiPlusBoundaryA[1], pAd->TssiPlusBoundaryA[2], pAd->TssiPlusBoundaryA[3], pAd->TssiPlusBoundaryA[4],
-			pAd->TxAgcStepA, pAd->bAutoTxAgcA));
-	}
-	pAd->BbpRssiToDbmDelta = 0x0;
-
-	// Read frequency offset setting for RF
-	RT28xx_EEPROM_READ16(pAd, EEPROM_FREQ_OFFSET, value);
-	if ((value & 0x00FF) != 0x00FF)
-		pAd->RfFreqOffset = (ULONG) (value & 0x00FF);
-	else
-		pAd->RfFreqOffset = 0;
-	DBGPRINT(RT_DEBUG_TRACE, ("E2PROM: RF FreqOffset=0x%lx \n", pAd->RfFreqOffset));
-
-	//CountryRegion byte offset (38h)
-	value = pAd->EEPROMDefaultValue[2] >> 8;		// 2.4G band
-	value2 = pAd->EEPROMDefaultValue[2] & 0x00FF;	// 5G band
-
-	if ((value <= REGION_MAXIMUM_BG_BAND) && (value2 <= REGION_MAXIMUM_A_BAND))
-	{
-		pAd->CommonCfg.CountryRegion = ((UCHAR) value) | 0x80;
-		pAd->CommonCfg.CountryRegionForABand = ((UCHAR) value2) | 0x80;
-		TmpPhy = pAd->CommonCfg.PhyMode;
-		pAd->CommonCfg.PhyMode = 0xff;
-		RTMPSetPhyMode(pAd, TmpPhy);
-#ifdef DOT11_N_SUPPORT
-		SetCommonHT(pAd);
-#endif // DOT11_N_SUPPORT //
-	}
-
-	//
-	// Get RSSI Offset on EEPROM 0x9Ah & 0x9Ch.
-	// The valid value are (-10 ~ 10)
-	//
-	RT28xx_EEPROM_READ16(pAd, EEPROM_RSSI_BG_OFFSET, value);
-	pAd->BGRssiOffset0 = value & 0x00ff;
-	pAd->BGRssiOffset1 = (value >> 8);
-	RT28xx_EEPROM_READ16(pAd, EEPROM_RSSI_BG_OFFSET+2, value);
-	pAd->BGRssiOffset2 = value & 0x00ff;
-	pAd->ALNAGain1 = (value >> 8);
-	RT28xx_EEPROM_READ16(pAd, EEPROM_LNA_OFFSET, value);
-	pAd->BLNAGain = value & 0x00ff;
-	pAd->ALNAGain0 = (value >> 8);
-
-	// Validate 11b/g RSSI_0 offset.
-	if ((pAd->BGRssiOffset0 < -10) || (pAd->BGRssiOffset0 > 10))
-		pAd->BGRssiOffset0 = 0;
-
-	// Validate 11b/g RSSI_1 offset.
-	if ((pAd->BGRssiOffset1 < -10) || (pAd->BGRssiOffset1 > 10))
-		pAd->BGRssiOffset1 = 0;
-
-	// Validate 11b/g RSSI_2 offset.
-	if ((pAd->BGRssiOffset2 < -10) || (pAd->BGRssiOffset2 > 10))
-		pAd->BGRssiOffset2 = 0;
-
-	RT28xx_EEPROM_READ16(pAd, EEPROM_RSSI_A_OFFSET, value);
-	pAd->ARssiOffset0 = value & 0x00ff;
-	pAd->ARssiOffset1 = (value >> 8);
-	RT28xx_EEPROM_READ16(pAd, (EEPROM_RSSI_A_OFFSET+2), value);
-	pAd->ARssiOffset2 = value & 0x00ff;
-	pAd->ALNAGain2 = (value >> 8);
-
-	if (((UCHAR)pAd->ALNAGain1 == 0xFF) || (pAd->ALNAGain1 == 0x00))
-		pAd->ALNAGain1 = pAd->ALNAGain0;
-	if (((UCHAR)pAd->ALNAGain2 == 0xFF) || (pAd->ALNAGain2 == 0x00))
-		pAd->ALNAGain2 = pAd->ALNAGain0;
-
-	// Validate 11a RSSI_0 offset.
-	if ((pAd->ARssiOffset0 < -10) || (pAd->ARssiOffset0 > 10))
-		pAd->ARssiOffset0 = 0;
-
-	// Validate 11a RSSI_1 offset.
-	if ((pAd->ARssiOffset1 < -10) || (pAd->ARssiOffset1 > 10))
-		pAd->ARssiOffset1 = 0;
-
-	//Validate 11a RSSI_2 offset.
-	if ((pAd->ARssiOffset2 < -10) || (pAd->ARssiOffset2 > 10))
-		pAd->ARssiOffset2 = 0;
-
-	//
-	// Get LED Setting.
-	//
-	RT28xx_EEPROM_READ16(pAd, 0x3a, value);
-	pAd->LedCntl.word = (value&0xff00) >> 8;
-	RT28xx_EEPROM_READ16(pAd, EEPROM_LED1_OFFSET, value);
-	pAd->Led1 = value;
-	RT28xx_EEPROM_READ16(pAd, EEPROM_LED2_OFFSET, value);
-	pAd->Led2 = value;
-	RT28xx_EEPROM_READ16(pAd, EEPROM_LED3_OFFSET, value);
-	pAd->Led3 = value;
-
-	RTMPReadTxPwrPerRate(pAd);
-
-#ifdef SINGLE_SKU
-	//pAd->CommonCfg.DefineMaxTxPwr = RTMP_EEPROM_READ16(pAd, EEPROM_DEFINE_MAX_TXPWR);
-	RT28xx_EEPROM_READ16(pAd, EEPROM_DEFINE_MAX_TXPWR, pAd->CommonCfg.DefineMaxTxPwr);
-#endif // SINGLE_SKU //
-#ifdef RT30xx
-	if (IS_RT30xx(pAd))
-	{
-		eFusePhysicalReadRegisters(pAd, EFUSE_TAG, 2, &value);
-		pAd->EFuseTag = (value & 0xff);
-	}
-#endif // RT30xx //
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<-- NICReadEEPROMParameters\n"));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Set default value from EEPROM
-
-	Arguments:
-		Adapter						Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	NICInitAsicFromEEPROM(
-	IN	PRTMP_ADAPTER	pAd)
-{
-#ifdef CONFIG_STA_SUPPORT
-	UINT32					data = 0;
-	UCHAR	BBPR1 = 0;
-#endif // CONFIG_STA_SUPPORT //
-	USHORT					i;
-	EEPROM_ANTENNA_STRUC	Antenna;
-	EEPROM_NIC_CONFIG2_STRUC    NicConfig2;
-	UCHAR	BBPR3 = 0;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("--> NICInitAsicFromEEPROM\n"));
-	for(i = 3; i < NUM_EEPROM_BBP_PARMS; i++)
-	{
-		UCHAR BbpRegIdx, BbpValue;
-
-		if ((pAd->EEPROMDefaultValue[i] != 0xFFFF) && (pAd->EEPROMDefaultValue[i] != 0))
-		{
-			BbpRegIdx = (UCHAR)(pAd->EEPROMDefaultValue[i] >> 8);
-			BbpValue  = (UCHAR)(pAd->EEPROMDefaultValue[i] & 0xff);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BbpRegIdx, BbpValue);
-		}
-	}
-
-	Antenna.word = pAd->EEPROMDefaultValue[0];
-	if (Antenna.word == 0xFFFF)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("E2PROM error, hard code as 0x%04x\n", Antenna.word));
-		BUG_ON(Antenna.word == 0xFFFF);
-	}
-	pAd->Mlme.RealRxPath = (UCHAR) Antenna.field.RxPath;
-	pAd->RfIcType = (UCHAR) Antenna.field.RfIcType;
-
-	DBGPRINT(RT_DEBUG_WARN, ("pAd->RfIcType = %d, RealRxPath=%d, TxPath = %d\n", pAd->RfIcType, pAd->Mlme.RealRxPath,Antenna.field.TxPath));
-
-	// Save the antenna for future use
-	pAd->Antenna.word = Antenna.word;
-
-	NicConfig2.word = pAd->EEPROMDefaultValue[1];
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if ((NicConfig2.word & 0x00ff) == 0xff)
-		{
-			NicConfig2.word &= 0xff00;
-		}
-
-		if ((NicConfig2.word >> 8) == 0xff)
-		{
-			NicConfig2.word &= 0x00ff;
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	// Save the antenna for future use
-	pAd->NicConfig2.word = NicConfig2.word;
-
-	// set default antenna as main
-	if (pAd->RfIcType == RFIC_3020)
-		AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt);
-
-	//
-	// Send LED Setting to MCU.
-	//
-	if (pAd->LedCntl.word == 0xFF)
-	{
-		pAd->LedCntl.word = 0x01;
-		pAd->Led1 = 0x5555;
-		pAd->Led2 = 0x2221;
-
-#ifdef RT2870
-		pAd->Led3 = 0x5627;
-#endif // RT2870 //
-	}
-
-	AsicSendCommandToMcu(pAd, 0x52, 0xff, (UCHAR)pAd->Led1, (UCHAR)(pAd->Led1 >> 8));
-	AsicSendCommandToMcu(pAd, 0x53, 0xff, (UCHAR)pAd->Led2, (UCHAR)(pAd->Led2 >> 8));
-	AsicSendCommandToMcu(pAd, 0x54, 0xff, (UCHAR)pAd->Led3, (UCHAR)(pAd->Led3 >> 8));
-    pAd->LedIndicatorStregth = 0xFF;
-    RTMPSetSignalLED(pAd, -100);	// Force signal strength Led to be turned off, before link up
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// Read Hardware controlled Radio state enable bit
-		if (NicConfig2.field.HardwareRadioControl == 1)
-		{
-			pAd->StaCfg.bHardwareRadio = TRUE;
-
-			// Read GPIO pin2 as Hardware controlled radio state
-			RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &data);
-			if ((data & 0x04) == 0)
-			{
-				pAd->StaCfg.bHwRadio = FALSE;
-				pAd->StaCfg.bRadio = FALSE;
-//				RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x00001818);
-				RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
-			}
-		}
-		else
-			pAd->StaCfg.bHardwareRadio = FALSE;
-
-		if (pAd->StaCfg.bRadio == FALSE)
-		{
-			RTMPSetLED(pAd, LED_RADIO_OFF);
-		}
-		else
-		{
-			RTMPSetLED(pAd, LED_RADIO_ON);
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	// Turn off patching for cardbus controller
-	if (NicConfig2.field.CardbusAcceleration == 1)
-	{
-//		pAd->bTest1 = TRUE;
-	}
-
-	if (NicConfig2.field.DynamicTxAgcControl == 1)
-		pAd->bAutoTxAgcA = pAd->bAutoTxAgcG = TRUE;
-	else
-		pAd->bAutoTxAgcA = pAd->bAutoTxAgcG = FALSE;
-	//
-	// Since BBP has been progamed, to make sure BBP setting will be
-	// upate inside of AsicAntennaSelect, so reset to UNKNOWN_BAND!!
-	//
-	pAd->CommonCfg.BandState = UNKNOWN_BAND;
-
-	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3);
-	BBPR3 &= (~0x18);
-	if(pAd->Antenna.field.RxPath == 3)
-	{
-		BBPR3 |= (0x10);
-	}
-	else if(pAd->Antenna.field.RxPath == 2)
-	{
-		BBPR3 |= (0x8);
-	}
-	else if(pAd->Antenna.field.RxPath == 1)
-	{
-		BBPR3 |= (0x0);
-	}
-	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// Handle the difference when 1T
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BBPR1);
-		if(pAd->Antenna.field.TxPath == 1)
-		{
-		BBPR1 &= (~0x18);
-		}
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BBPR1);
-
-		DBGPRINT(RT_DEBUG_TRACE, ("Use Hw Radio Control Pin=%d; if used Pin=%d;\n", pAd->CommonCfg.bHardwareRadio, pAd->CommonCfg.bHardwareRadio));
-	}
-#endif // CONFIG_STA_SUPPORT //
-	DBGPRINT(RT_DEBUG_TRACE, ("TxPath = %d, RxPath = %d, RFIC=%d, Polar+LED mode=%x\n", pAd->Antenna.field.TxPath, pAd->Antenna.field.RxPath, pAd->RfIcType, pAd->LedCntl.word));
-	DBGPRINT(RT_DEBUG_TRACE, ("<-- NICInitAsicFromEEPROM\n"));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Initialize NIC hardware
-
-	Arguments:
-		Adapter						Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-NDIS_STATUS	NICInitializeAdapter(
-	IN	PRTMP_ADAPTER	pAd,
-	IN   BOOLEAN    bHardReset)
-{
-	NDIS_STATUS     Status = NDIS_STATUS_SUCCESS;
-	WPDMA_GLO_CFG_STRUC	GloCfg;
-//	INT_MASK_CSR_STRUC		IntMask;
-	ULONG	i =0, j=0;
-	AC_TXOP_CSR0_STRUC	csr0;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("--> NICInitializeAdapter\n"));
-
-	// 3. Set DMA global configuration except TX_DMA_EN and RX_DMA_EN bits:
-retry:
-	i = 0;
-	do
-	{
-		RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &GloCfg.word);
-		if ((GloCfg.field.TxDMABusy == 0)  && (GloCfg.field.RxDMABusy == 0))
-			break;
-
-		RTMPusecDelay(1000);
-		i++;
-	}while ( i<100);
-	DBGPRINT(RT_DEBUG_TRACE, ("<== DMA offset 0x208 = 0x%x\n", GloCfg.word));
-	GloCfg.word &= 0xff0;
-	GloCfg.field.EnTXWriteBackDDONE =1;
-	RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, GloCfg.word);
-
-	// Record HW Beacon offset
-	pAd->BeaconOffset[0] = HW_BEACON_BASE0;
-	pAd->BeaconOffset[1] = HW_BEACON_BASE1;
-	pAd->BeaconOffset[2] = HW_BEACON_BASE2;
-	pAd->BeaconOffset[3] = HW_BEACON_BASE3;
-	pAd->BeaconOffset[4] = HW_BEACON_BASE4;
-	pAd->BeaconOffset[5] = HW_BEACON_BASE5;
-	pAd->BeaconOffset[6] = HW_BEACON_BASE6;
-	pAd->BeaconOffset[7] = HW_BEACON_BASE7;
-
-	//
-	// write all shared Ring's base address into ASIC
-	//
-
-	// asic simulation sequence put this ahead before loading firmware.
-	// pbf hardware reset
-
-	// Initialze ASIC for TX & Rx operation
-	if (NICInitializeAsic(pAd , bHardReset) != NDIS_STATUS_SUCCESS)
-	{
-		if (j++ == 0)
-		{
-			NICLoadFirmware(pAd);
-			goto retry;
-		}
-		return NDIS_STATUS_FAILURE;
-	}
-
-
-
-
-	// WMM parameter
-	csr0.word = 0;
-	RTMP_IO_WRITE32(pAd, WMM_TXOP0_CFG, csr0.word);
-	if (pAd->CommonCfg.PhyMode == PHY_11B)
-	{
-		csr0.field.Ac0Txop = 192;	// AC_VI: 192*32us ~= 6ms
-		csr0.field.Ac1Txop = 96;	// AC_VO: 96*32us  ~= 3ms
-	}
-	else
-	{
-		csr0.field.Ac0Txop = 96;	// AC_VI: 96*32us ~= 3ms
-		csr0.field.Ac1Txop = 48;	// AC_VO: 48*32us ~= 1.5ms
-	}
-	RTMP_IO_WRITE32(pAd, WMM_TXOP1_CFG, csr0.word);
-
-
-
-
-	// reset action
-	// Load firmware
-	//  Status = NICLoadFirmware(pAd);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<-- NICInitializeAdapter\n"));
-	return Status;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Initialize ASIC
-
-	Arguments:
-		Adapter						Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-NDIS_STATUS	NICInitializeAsic(
-	IN	PRTMP_ADAPTER	pAd,
-	IN  BOOLEAN		bHardReset)
-{
-	ULONG			Index = 0;
-	UCHAR			R0 = 0xff;
-	UINT32			MacCsr12 = 0, Counter = 0;
-#ifdef RT2870
-	UINT32			MacCsr0 = 0;
-	NTSTATUS		Status;
-	UCHAR			Value = 0xff;
-#endif // RT2870 //
-#ifdef RT30xx
-	UINT32			eFuseCtrl;
-#endif // RT30xx //
-	USHORT			KeyIdx;
-	INT				i,apidx;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("--> NICInitializeAsic\n"));
-
-
-#ifdef RT2870
-	//
-	// Make sure MAC gets ready after NICLoadFirmware().
-	//
-	Index = 0;
-
-	//To avoid hang-on issue when interface up in kernel 2.4,
-	//we use a local variable "MacCsr0" instead of using "pAd->MACVersion" directly.
-	do
-	{
-		RTMP_IO_READ32(pAd, MAC_CSR0, &MacCsr0);
-
-		if ((MacCsr0 != 0x00) && (MacCsr0 != 0xFFFFFFFF))
-			break;
-
-		RTMPusecDelay(10);
-	} while (Index++ < 100);
-
-	pAd->MACVersion = MacCsr0;
-	DBGPRINT(RT_DEBUG_TRACE, ("MAC_CSR0  [ Ver:Rev=0x%08x]\n", pAd->MACVersion));
-	// turn on bit13 (set to zero) after rt2860D. This is to solve high-current issue.
-	RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &MacCsr12);
-	MacCsr12 &= (~0x2000);
-	RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, MacCsr12);
-
-	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x3);
-	RTMP_IO_WRITE32(pAd, USB_DMA_CFG, 0x0);
-	Status = RTUSBVenderReset(pAd);
-
-	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x0);
-
-	// Initialize MAC register to default value
-	for(Index=0; Index<NUM_MAC_REG_PARMS; Index++)
-	{
-#ifdef RT3070
-		if ((MACRegTable[Index].Register == TX_SW_CFG0) && (IS_RT3070(pAd) || IS_RT3071(pAd)))
-		{
-			MACRegTable[Index].Value = 0x00000400;
-		}
-#endif // RT3070 //
-		RTMP_IO_WRITE32(pAd, (USHORT)MACRegTable[Index].Register, MACRegTable[Index].Value);
-	}
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		for (Index = 0; Index < NUM_STA_MAC_REG_PARMS; Index++)
-		{
-			RTMP_IO_WRITE32(pAd, (USHORT)STAMACRegTable[Index].Register, STAMACRegTable[Index].Value);
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-#endif // RT2870 //
-
-#ifdef RT30xx
-	// Initialize RT3070 serial MAc registers which is different from RT2870 serial
-	if (IS_RT3090(pAd))
-	{
-		RTMP_IO_WRITE32(pAd, TX_SW_CFG1, 0);
-
-		// RT3071 version E has fixed this issue
-		if ((pAd->MACVersion & 0xffff) < 0x0211)
-		{
-			if (pAd->NicConfig2.field.DACTestBit == 1)
-			{
-				RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x1F);	// To fix throughput drop drastically
-			}
-			else
-			{
-				RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x0F);	// To fix throughput drop drastically
-			}
-		}
-		else
-		{
-			RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x0);
-		}
-	}
-	else if (IS_RT3070(pAd))
-	{
-		RTMP_IO_WRITE32(pAd, TX_SW_CFG1, 0);
-		RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x1F);	// To fix throughput drop drastically
-	}
-#endif // RT30xx //
-
-	//
-	// Before program BBP, we need to wait BBP/RF get wake up.
-	//
-	Index = 0;
-	do
-	{
-		RTMP_IO_READ32(pAd, MAC_STATUS_CFG, &MacCsr12);
-
-		if ((MacCsr12 & 0x03) == 0)	// if BB.RF is stable
-			break;
-
-		DBGPRINT(RT_DEBUG_TRACE, ("Check MAC_STATUS_CFG  = Busy = %x\n", MacCsr12));
-		RTMPusecDelay(1000);
-	} while (Index++ < 100);
-
-    // The commands to firmware should be after these commands, these commands will init firmware
-	// PCI and USB are not the same because PCI driver needs to wait for PCI bus ready
-	RTMP_IO_WRITE32(pAd, H2M_BBP_AGENT, 0);	// initialize BBP R/W access agent
-	RTMP_IO_WRITE32(pAd, H2M_MAILBOX_CSR, 0);
-	RTMPusecDelay(1000);
-
-	// Read BBP register, make sure BBP is up and running before write new data
-	Index = 0;
-	do
-	{
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R0, &R0);
-		DBGPRINT(RT_DEBUG_TRACE, ("BBP version = %x\n", R0));
-	} while ((++Index < 20) && ((R0 == 0xff) || (R0 == 0x00)));
-	//ASSERT(Index < 20); //this will cause BSOD on Check-build driver
-
-	if ((R0 == 0xff) || (R0 == 0x00))
-		return NDIS_STATUS_FAILURE;
-
-	// Initialize BBP register to default value
-	for (Index = 0; Index < NUM_BBP_REG_PARMS; Index++)
-	{
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBPRegTable[Index].Register, BBPRegTable[Index].Value);
-	}
-
-	// for rt2860E and after, init BBP_R84 with 0x19. This is for extension channel overlapping IOT.
-	// RT3090 should not program BBP R84 to 0x19, otherwise TX will block.
-	if (((pAd->MACVersion&0xffff) != 0x0101) && (!IS_RT30xx(pAd)))
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x19);
-
-// add by johnli, RF power sequence setup
-#ifdef RT30xx
-	if (IS_RT30xx(pAd))
-	{	//update for RT3070/71/72/90/91/92.
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R79, 0x13);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R80, 0x05);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R81, 0x33);
-	}
-
-	if (IS_RT3090(pAd))
-	{
-		UCHAR		bbpreg=0;
-
-		// enable DC filter
-		if ((pAd->MACVersion & 0xffff) >= 0x0211)
-		{
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R103, 0xc0);
-		}
-
-		// improve power consumption
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R138, &bbpreg);
-		if (pAd->Antenna.field.TxPath == 1)
-		{
-			// turn off tx DAC_1
-			bbpreg = (bbpreg | 0x20);
-		}
-
-		if (pAd->Antenna.field.RxPath == 1)
-		{
-			// turn off tx ADC_1
-			bbpreg &= (~0x2);
-		}
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R138, bbpreg);
-
-		// improve power consumption in RT3071 Ver.E
-		if ((pAd->MACVersion & 0xffff) >= 0x0211)
-		{
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R31, &bbpreg);
-			bbpreg &= (~0x3);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R31, bbpreg);
-		}
-	}
-#endif // RT30xx //
-// end johnli
-
-	if (pAd->MACVersion == 0x28600100)
-	{
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x16);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x12);
-    }
-
-	if (pAd->MACVersion >= RALINK_2880E_VERSION && pAd->MACVersion < RALINK_3070_VERSION) // 3*3
-	{
-		// enlarge MAX_LEN_CFG
-		UINT32 csr;
-		RTMP_IO_READ32(pAd, MAX_LEN_CFG, &csr);
-		csr &= 0xFFF;
-		csr |= 0x2000;
-		RTMP_IO_WRITE32(pAd, MAX_LEN_CFG, csr);
-	}
-
-#ifdef RT2870
-{
-	UCHAR	MAC_Value[]={0xff,0xff,0xff,0xff,0xff,0xff,0xff,0,0};
-
-	//Initialize WCID table
-	Value = 0xff;
-	for(Index =0 ;Index < 254;Index++)
-	{
-		RTUSBMultiWrite(pAd, (USHORT)(MAC_WCID_BASE + Index * 8), MAC_Value, 8);
-	}
-}
-#endif // RT2870 //
-
-	// Add radio off control
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if (pAd->StaCfg.bRadio == FALSE)
-		{
-//			RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x00001818);
-			RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
-			DBGPRINT(RT_DEBUG_TRACE, ("Set Radio Off\n"));
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	// Clear raw counters
-	RTMP_IO_READ32(pAd, RX_STA_CNT0, &Counter);
-	RTMP_IO_READ32(pAd, RX_STA_CNT1, &Counter);
-	RTMP_IO_READ32(pAd, RX_STA_CNT2, &Counter);
-	RTMP_IO_READ32(pAd, TX_STA_CNT0, &Counter);
-	RTMP_IO_READ32(pAd, TX_STA_CNT1, &Counter);
-	RTMP_IO_READ32(pAd, TX_STA_CNT2, &Counter);
-
-	// ASIC will keep garbage value after boot
-	// Clear all seared key table when initial
-	// This routine can be ignored in radio-ON/OFF operation.
-	if (bHardReset)
-	{
-		for (KeyIdx = 0; KeyIdx < 4; KeyIdx++)
-		{
-			RTMP_IO_WRITE32(pAd, SHARED_KEY_MODE_BASE + 4*KeyIdx, 0);
-		}
-
-	// Clear all pairwise key table when initial
-	for (KeyIdx = 0; KeyIdx < 256; KeyIdx++)
-	{
-		RTMP_IO_WRITE32(pAd, MAC_WCID_ATTRIBUTE_BASE + (KeyIdx * HW_WCID_ATTRI_SIZE), 1);
-	}
-	}
-
-	// assert HOST ready bit
-//  RTMP_IO_WRITE32(pAd, MAC_CSR1, 0x0); // 2004-09-14 asked by Mark
-//  RTMP_IO_WRITE32(pAd, MAC_CSR1, 0x4);
-
-	// It isn't necessary to clear this space when not hard reset.
-	if (bHardReset == TRUE)
-	{
-		// clear all on-chip BEACON frame space
-		for (apidx = 0; apidx < HW_BEACON_MAX_COUNT; apidx++)
-		{
-			for (i = 0; i < HW_BEACON_OFFSET>>2; i+=4)
-				RTMP_IO_WRITE32(pAd, pAd->BeaconOffset[apidx] + i, 0x00);
-		}
-	}
-#ifdef RT2870
-	AsicDisableSync(pAd);
-	// Clear raw counters
-	RTMP_IO_READ32(pAd, RX_STA_CNT0, &Counter);
-	RTMP_IO_READ32(pAd, RX_STA_CNT1, &Counter);
-	RTMP_IO_READ32(pAd, RX_STA_CNT2, &Counter);
-	RTMP_IO_READ32(pAd, TX_STA_CNT0, &Counter);
-	RTMP_IO_READ32(pAd, TX_STA_CNT1, &Counter);
-	RTMP_IO_READ32(pAd, TX_STA_CNT2, &Counter);
-	// Default PCI clock cycle per ms is different as default setting, which is based on PCI.
-	RTMP_IO_READ32(pAd, USB_CYC_CFG, &Counter);
-	Counter&=0xffffff00;
-	Counter|=0x000001e;
-	RTMP_IO_WRITE32(pAd, USB_CYC_CFG, Counter);
-#endif // RT2870 //
-#ifdef RT30xx
-	pAd->bUseEfuse=FALSE;
-	RTMP_IO_READ32(pAd, EFUSE_CTRL, &eFuseCtrl);
-	pAd->bUseEfuse = ( (eFuseCtrl & 0x80000000) == 0x80000000) ? 1 : 0;
-	if(pAd->bUseEfuse)
-	{
-			DBGPRINT(RT_DEBUG_TRACE, ("NVM is Efuse\n"));
-	}
-	else
-	{
-			DBGPRINT(RT_DEBUG_TRACE, ("NVM is EEPROM\n"));
-
-	}
-#endif // RT30xx //
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// for rt2860E and after, init TXOP_CTRL_CFG with 0x583f. This is for extension channel overlapping IOT.
-		if ((pAd->MACVersion&0xffff) != 0x0101)
-			RTMP_IO_WRITE32(pAd, TXOP_CTRL_CFG, 0x583f);
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<-- NICInitializeAsic\n"));
-	return NDIS_STATUS_SUCCESS;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Reset NIC Asics
-
-	Arguments:
-		Adapter						Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-
-	Note:
-		Reset NIC to initial state AS IS system boot up time.
-
-	========================================================================
-*/
-VOID	NICIssueReset(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	UINT32	Value = 0;
-	DBGPRINT(RT_DEBUG_TRACE, ("--> NICIssueReset\n"));
-
-	// Abort Tx, prevent ASIC from writing to Host memory
-	//RTMP_IO_WRITE32(pAd, TX_CNTL_CSR, 0x001f0000);
-
-	// Disable Rx, register value supposed will remain after reset
-	RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-	Value &= (0xfffffff3);
-	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-	// Issue reset and clear from reset state
-	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x03); // 2004-09-17 change from 0x01
-	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x00);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<-- NICIssueReset\n"));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Check ASIC registers and find any reason the system might hang
-
-	Arguments:
-		Adapter						Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	========================================================================
-*/
-BOOLEAN	NICCheckForHang(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	return (FALSE);
-}
-
-VOID NICUpdateFifoStaCounters(
-	IN PRTMP_ADAPTER pAd)
-{
-	TX_STA_FIFO_STRUC	StaFifo;
-	MAC_TABLE_ENTRY		*pEntry;
-	UCHAR				i = 0;
-	UCHAR			pid = 0, wcid = 0;
-	CHAR				reTry;
-	UCHAR				succMCS;
-
-#ifdef RALINK_ATE
-	/* Nothing to do in ATE mode */
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-		do
-		{
-			RTMP_IO_READ32(pAd, TX_STA_FIFO, &StaFifo.word);
-
-			if (StaFifo.field.bValid == 0)
-				break;
-
-			wcid = (UCHAR)StaFifo.field.wcid;
-
-
-		/* ignore NoACK and MGMT frame use 0xFF as WCID */
-			if ((StaFifo.field.TxAckRequired == 0) || (wcid >= MAX_LEN_OF_MAC_TABLE))
-			{
-				i++;
-				continue;
-			}
-
-			/* PID store Tx MCS Rate */
-			pid = (UCHAR)StaFifo.field.PidType;
-
-			pEntry = &pAd->MacTab.Content[wcid];
-
-			pEntry->DebugFIFOCount++;
-
-#ifdef DOT11_N_SUPPORT
-			if (StaFifo.field.TxBF) // 3*3
-				pEntry->TxBFCount++;
-#endif // DOT11_N_SUPPORT //
-
-#ifdef UAPSD_AP_SUPPORT
-			UAPSD_SP_AUE_Handle(pAd, pEntry, StaFifo.field.TxSuccess);
-#endif // UAPSD_AP_SUPPORT //
-
-			if (!StaFifo.field.TxSuccess)
-			{
-				pEntry->FIFOCount++;
-				pEntry->OneSecTxFailCount++;
-
-				if (pEntry->FIFOCount >= 1)
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("#"));
-#ifdef DOT11_N_SUPPORT
-					pEntry->NoBADataCountDown = 64;
-#endif // DOT11_N_SUPPORT //
-
-					if(pEntry->PsMode == PWR_ACTIVE)
-					{
-#ifdef DOT11_N_SUPPORT
-						int tid;
-						for (tid=0; tid<NUM_OF_TID; tid++)
-						{
-							BAOriSessionTearDown(pAd, pEntry->Aid,  tid, FALSE, FALSE);
-						}
-#endif // DOT11_N_SUPPORT //
-
-						// Update the continuous transmission counter except PS mode
-						pEntry->ContinueTxFailCnt++;
-					}
-					else
-					{
-						// Clear the FIFOCount when sta in Power Save mode. Basically we assume
-						//     this tx error happened due to sta just go to sleep.
-						pEntry->FIFOCount = 0;
-						pEntry->ContinueTxFailCnt = 0;
-					}
-					//pEntry->FIFOCount = 0;
-				}
-				//pEntry->bSendBAR = TRUE;
-			}
-			else
-			{
-#ifdef DOT11_N_SUPPORT
-				if ((pEntry->PsMode != PWR_SAVE) && (pEntry->NoBADataCountDown > 0))
-				{
-					pEntry->NoBADataCountDown--;
-					if (pEntry->NoBADataCountDown==0)
-					{
-						DBGPRINT(RT_DEBUG_TRACE, ("@\n"));
-					}
-				}
-#endif // DOT11_N_SUPPORT //
-				pEntry->FIFOCount = 0;
-				pEntry->OneSecTxNoRetryOkCount++;
-				// update NoDataIdleCount when sucessful send packet to STA.
-				pEntry->NoDataIdleCount = 0;
-				pEntry->ContinueTxFailCnt = 0;
-			}
-
-			succMCS = StaFifo.field.SuccessRate & 0x7F;
-
-			reTry = pid - succMCS;
-
-			if (StaFifo.field.TxSuccess)
-			{
-				pEntry->TXMCSExpected[pid]++;
-				if (pid == succMCS)
-				{
-					pEntry->TXMCSSuccessful[pid]++;
-				}
-				else
-				{
-					pEntry->TXMCSAutoFallBack[pid][succMCS]++;
-				}
-			}
-			else
-			{
-				pEntry->TXMCSFailed[pid]++;
-			}
-
-			if (reTry > 0)
-			{
-				if ((pid >= 12) && succMCS <=7)
-				{
-					reTry -= 4;
-				}
-				pEntry->OneSecTxRetryOkCount += reTry;
-			}
-
-			i++;
-			// ASIC store 16 stack
-		} while ( i < (2*TX_RING_SIZE) );
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Read statistical counters from hardware registers and record them
-		in software variables for later on query
-
-	Arguments:
-		pAd					Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	========================================================================
-*/
-VOID NICUpdateRawCounters(
-	IN PRTMP_ADAPTER pAd)
-{
-	UINT32	OldValue;//, Value2;
-	//ULONG	PageSum, OneSecTransmitCount;
-	//ULONG	TxErrorRatio, Retry, Fail;
-	RX_STA_CNT0_STRUC	 RxStaCnt0;
-	RX_STA_CNT1_STRUC   RxStaCnt1;
-	RX_STA_CNT2_STRUC   RxStaCnt2;
-	TX_STA_CNT0_STRUC 	 TxStaCnt0;
-	TX_STA_CNT1_STRUC	 StaTx1;
-	TX_STA_CNT2_STRUC	 StaTx2;
-	TX_AGG_CNT_STRUC	TxAggCnt;
-	TX_AGG_CNT0_STRUC	TxAggCnt0;
-	TX_AGG_CNT1_STRUC	TxAggCnt1;
-	TX_AGG_CNT2_STRUC	TxAggCnt2;
-	TX_AGG_CNT3_STRUC	TxAggCnt3;
-	TX_AGG_CNT4_STRUC	TxAggCnt4;
-	TX_AGG_CNT5_STRUC	TxAggCnt5;
-	TX_AGG_CNT6_STRUC	TxAggCnt6;
-	TX_AGG_CNT7_STRUC	TxAggCnt7;
-
-	RTMP_IO_READ32(pAd, RX_STA_CNT0, &RxStaCnt0.word);
-	RTMP_IO_READ32(pAd, RX_STA_CNT2, &RxStaCnt2.word);
-
-	{
-		RTMP_IO_READ32(pAd, RX_STA_CNT1, &RxStaCnt1.word);
-	    // Update RX PLCP error counter
-	    pAd->PrivateInfo.PhyRxErrCnt += RxStaCnt1.field.PlcpErr;
-		// Update False CCA counter
-		pAd->RalinkCounters.OneSecFalseCCACnt += RxStaCnt1.field.FalseCca;
-	}
-
-	// Update FCS counters
-	OldValue= pAd->WlanCounters.FCSErrorCount.u.LowPart;
-	pAd->WlanCounters.FCSErrorCount.u.LowPart += (RxStaCnt0.field.CrcErr); // >> 7);
-	if (pAd->WlanCounters.FCSErrorCount.u.LowPart < OldValue)
-		pAd->WlanCounters.FCSErrorCount.u.HighPart++;
-
-	// Add FCS error count to private counters
-	pAd->RalinkCounters.OneSecRxFcsErrCnt += RxStaCnt0.field.CrcErr;
-	OldValue = pAd->RalinkCounters.RealFcsErrCount.u.LowPart;
-	pAd->RalinkCounters.RealFcsErrCount.u.LowPart += RxStaCnt0.field.CrcErr;
-	if (pAd->RalinkCounters.RealFcsErrCount.u.LowPart < OldValue)
-		pAd->RalinkCounters.RealFcsErrCount.u.HighPart++;
-
-	// Update Duplicate Rcv check
-	pAd->RalinkCounters.DuplicateRcv += RxStaCnt2.field.RxDupliCount;
-	pAd->WlanCounters.FrameDuplicateCount.u.LowPart += RxStaCnt2.field.RxDupliCount;
-	// Update RX Overflow counter
-	pAd->Counters8023.RxNoBuffer += (RxStaCnt2.field.RxFifoOverflowCount);
-
-	//pAd->RalinkCounters.RxCount = 0;
-#ifdef RT2870
-	if (pAd->RalinkCounters.RxCount != pAd->watchDogRxCnt)
-	{
-		pAd->watchDogRxCnt = pAd->RalinkCounters.RxCount;
-		pAd->watchDogRxOverFlowCnt = 0;
-	}
-	else
-	{
-		if (RxStaCnt2.field.RxFifoOverflowCount)
-			pAd->watchDogRxOverFlowCnt++;
-		else
-			pAd->watchDogRxOverFlowCnt = 0;
-	}
-#endif // RT2870 //
-
-
-	//if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED) ||
-	//	(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED) && (pAd->MacTab.Size != 1)))
-	if (!pAd->bUpdateBcnCntDone)
-	{
-	// Update BEACON sent count
-	RTMP_IO_READ32(pAd, TX_STA_CNT0, &TxStaCnt0.word);
-	RTMP_IO_READ32(pAd, TX_STA_CNT1, &StaTx1.word);
-	RTMP_IO_READ32(pAd, TX_STA_CNT2, &StaTx2.word);
-	pAd->RalinkCounters.OneSecBeaconSentCnt += TxStaCnt0.field.TxBeaconCount;
-	pAd->RalinkCounters.OneSecTxRetryOkCount += StaTx1.field.TxRetransmit;
-	pAd->RalinkCounters.OneSecTxNoRetryOkCount += StaTx1.field.TxSuccess;
-	pAd->RalinkCounters.OneSecTxFailCount += TxStaCnt0.field.TxFailCount;
-	pAd->WlanCounters.TransmittedFragmentCount.u.LowPart += StaTx1.field.TxSuccess;
-	pAd->WlanCounters.RetryCount.u.LowPart += StaTx1.field.TxRetransmit;
-	pAd->WlanCounters.FailedCount.u.LowPart += TxStaCnt0.field.TxFailCount;
-	}
-
-	//if (pAd->bStaFifoTest == TRUE)
-	{
-		RTMP_IO_READ32(pAd, TX_AGG_CNT, &TxAggCnt.word);
-		RTMP_IO_READ32(pAd, TX_AGG_CNT0, &TxAggCnt0.word);
-		RTMP_IO_READ32(pAd, TX_AGG_CNT1, &TxAggCnt1.word);
-		RTMP_IO_READ32(pAd, TX_AGG_CNT2, &TxAggCnt2.word);
-		RTMP_IO_READ32(pAd, TX_AGG_CNT3, &TxAggCnt3.word);
-		RTMP_IO_READ32(pAd, TX_AGG_CNT4, &TxAggCnt4.word);
-		RTMP_IO_READ32(pAd, TX_AGG_CNT5, &TxAggCnt5.word);
-		RTMP_IO_READ32(pAd, TX_AGG_CNT6, &TxAggCnt6.word);
-		RTMP_IO_READ32(pAd, TX_AGG_CNT7, &TxAggCnt7.word);
-		pAd->RalinkCounters.TxAggCount += TxAggCnt.field.AggTxCount;
-		pAd->RalinkCounters.TxNonAggCount += TxAggCnt.field.NonAggTxCount;
-		pAd->RalinkCounters.TxAgg1MPDUCount += TxAggCnt0.field.AggSize1Count;
-		pAd->RalinkCounters.TxAgg2MPDUCount += TxAggCnt0.field.AggSize2Count;
-
-		pAd->RalinkCounters.TxAgg3MPDUCount += TxAggCnt1.field.AggSize3Count;
-		pAd->RalinkCounters.TxAgg4MPDUCount += TxAggCnt1.field.AggSize4Count;
-		pAd->RalinkCounters.TxAgg5MPDUCount += TxAggCnt2.field.AggSize5Count;
-		pAd->RalinkCounters.TxAgg6MPDUCount += TxAggCnt2.field.AggSize6Count;
-
-		pAd->RalinkCounters.TxAgg7MPDUCount += TxAggCnt3.field.AggSize7Count;
-		pAd->RalinkCounters.TxAgg8MPDUCount += TxAggCnt3.field.AggSize8Count;
-		pAd->RalinkCounters.TxAgg9MPDUCount += TxAggCnt4.field.AggSize9Count;
-		pAd->RalinkCounters.TxAgg10MPDUCount += TxAggCnt4.field.AggSize10Count;
-
-		pAd->RalinkCounters.TxAgg11MPDUCount += TxAggCnt5.field.AggSize11Count;
-		pAd->RalinkCounters.TxAgg12MPDUCount += TxAggCnt5.field.AggSize12Count;
-		pAd->RalinkCounters.TxAgg13MPDUCount += TxAggCnt6.field.AggSize13Count;
-		pAd->RalinkCounters.TxAgg14MPDUCount += TxAggCnt6.field.AggSize14Count;
-
-		pAd->RalinkCounters.TxAgg15MPDUCount += TxAggCnt7.field.AggSize15Count;
-		pAd->RalinkCounters.TxAgg16MPDUCount += TxAggCnt7.field.AggSize16Count;
-
-		// Calculate the transmitted A-MPDU count
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += TxAggCnt0.field.AggSize1Count;
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt0.field.AggSize2Count / 2);
-
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt1.field.AggSize3Count / 3);
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt1.field.AggSize4Count / 4);
-
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt2.field.AggSize5Count / 5);
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt2.field.AggSize6Count / 6);
-
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt3.field.AggSize7Count / 7);
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt3.field.AggSize8Count / 8);
-
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt4.field.AggSize9Count / 9);
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt4.field.AggSize10Count / 10);
-
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt5.field.AggSize11Count / 11);
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt5.field.AggSize12Count / 12);
-
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt6.field.AggSize13Count / 13);
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt6.field.AggSize14Count / 14);
-
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt7.field.AggSize15Count / 15);
-		pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt7.field.AggSize16Count / 16);
-	}
-
-#ifdef DBG_DIAGNOSE
-	{
-		RtmpDiagStruct	*pDiag;
-		COUNTER_RALINK	*pRalinkCounters;
-		UCHAR			ArrayCurIdx, i;
-
-		pDiag = &pAd->DiagStruct;
-		pRalinkCounters = &pAd->RalinkCounters;
-		ArrayCurIdx = pDiag->ArrayCurIdx;
-
-		if (pDiag->inited == 0)
-		{
-			NdisZeroMemory(pDiag, sizeof(struct _RtmpDiagStrcut_));
-			pDiag->ArrayStartIdx = pDiag->ArrayCurIdx = 0;
-			pDiag->inited = 1;
-		}
-		else
-		{
-			// Tx
-			pDiag->TxFailCnt[ArrayCurIdx] = TxStaCnt0.field.TxFailCount;
-			pDiag->TxAggCnt[ArrayCurIdx] = TxAggCnt.field.AggTxCount;
-			pDiag->TxNonAggCnt[ArrayCurIdx] = TxAggCnt.field.NonAggTxCount;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][0] = TxAggCnt0.field.AggSize1Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][1] = TxAggCnt0.field.AggSize2Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][2] = TxAggCnt1.field.AggSize3Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][3] = TxAggCnt1.field.AggSize4Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][4] = TxAggCnt2.field.AggSize5Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][5] = TxAggCnt2.field.AggSize6Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][6] = TxAggCnt3.field.AggSize7Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][7] = TxAggCnt3.field.AggSize8Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][8] = TxAggCnt4.field.AggSize9Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][9] = TxAggCnt4.field.AggSize10Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][10] = TxAggCnt5.field.AggSize11Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][11] = TxAggCnt5.field.AggSize12Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][12] = TxAggCnt6.field.AggSize13Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][13] = TxAggCnt6.field.AggSize14Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][14] = TxAggCnt7.field.AggSize15Count;
-			pDiag->TxAMPDUCnt[ArrayCurIdx][15] = TxAggCnt7.field.AggSize16Count;
-
-			pDiag->RxCrcErrCnt[ArrayCurIdx] = RxStaCnt0.field.CrcErr;
-
-			INC_RING_INDEX(pDiag->ArrayCurIdx,  DIAGNOSE_TIME);
-			ArrayCurIdx = pDiag->ArrayCurIdx;
-			for (i =0; i < 9; i++)
-			{
-				pDiag->TxDescCnt[ArrayCurIdx][i]= 0;
-				pDiag->TxSWQueCnt[ArrayCurIdx][i] =0;
-				pDiag->TxMcsCnt[ArrayCurIdx][i] = 0;
-				pDiag->RxMcsCnt[ArrayCurIdx][i] = 0;
-			}
-			pDiag->TxDataCnt[ArrayCurIdx] = 0;
-			pDiag->TxFailCnt[ArrayCurIdx] = 0;
-			pDiag->RxDataCnt[ArrayCurIdx] = 0;
-			pDiag->RxCrcErrCnt[ArrayCurIdx]  = 0;
-//			for (i = 9; i < 16; i++)
-			for (i = 9; i < 24; i++) // 3*3
-			{
-				pDiag->TxDescCnt[ArrayCurIdx][i] = 0;
-				pDiag->TxMcsCnt[ArrayCurIdx][i] = 0;
-				pDiag->RxMcsCnt[ArrayCurIdx][i] = 0;
-}
-
-			if (pDiag->ArrayCurIdx == pDiag->ArrayStartIdx)
-				INC_RING_INDEX(pDiag->ArrayStartIdx,  DIAGNOSE_TIME);
-		}
-
-	}
-#endif // DBG_DIAGNOSE //
-
-
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Reset NIC from error
-
-	Arguments:
-		Adapter						Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-
-	Note:
-		Reset NIC from error state
-
-	========================================================================
-*/
-VOID	NICResetFromError(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	// Reset BBP (according to alex, reset ASIC will force reset BBP
-	// Therefore, skip the reset BBP
-	// RTMP_IO_WRITE32(pAd, MAC_CSR1, 0x2);
-
-	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x1);
-	// Remove ASIC from reset state
-	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x0);
-
-	NICInitializeAdapter(pAd, FALSE);
-	NICInitAsicFromEEPROM(pAd);
-
-	// Switch to current channel, since during reset process, the connection should remains on.
-	AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
-	AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		erase 8051 firmware image in MAC ASIC
-
-	Arguments:
-		Adapter						Pointer to our adapter
-
-	IRQL = PASSIVE_LEVEL
-
-	========================================================================
-*/
-VOID NICEraseFirmware(
-	IN PRTMP_ADAPTER pAd)
-{
-	ULONG i;
-
-	for(i=0; i<MAX_FIRMWARE_IMAGE_SIZE; i+=4)
-		RTMP_IO_WRITE32(pAd, FIRMWARE_IMAGE_BASE + i, 0);
-
-}/* End of NICEraseFirmware */
-
-/*
-	========================================================================
-
-	Routine Description:
-		Load 8051 firmware RT2561.BIN file into MAC ASIC
-
-	Arguments:
-		Adapter						Pointer to our adapter
-
-	Return Value:
-		NDIS_STATUS_SUCCESS         firmware image load ok
-		NDIS_STATUS_FAILURE         image not found
-
-	IRQL = PASSIVE_LEVEL
-
-	========================================================================
-*/
-NDIS_STATUS NICLoadFirmware(
-	IN PRTMP_ADAPTER pAd)
-{
-#ifdef BIN_IN_FILE
-#define NICLF_DEFAULT_USE()	\
-	flg_default_firm_use = TRUE; \
-	printk("%s - Use default firmware!\n", __FUNCTION__);
-
-	NDIS_STATUS		Status = NDIS_STATUS_SUCCESS;
-	PUCHAR			src;
-	struct file		*srcf;
-	INT 			retval, orgfsuid, orgfsgid, i;
-   	mm_segment_t	orgfs;
-	PUCHAR			pFirmwareImage;
-	UINT			FileLength = 0;
-	UINT32			MacReg;
-	ULONG			Index;
-	ULONG			firm;
-	BOOLEAN			flg_default_firm_use = FALSE;
-
-
-	DBGPRINT(RT_DEBUG_TRACE, ("===> %s\n", __FUNCTION__));
-
-	/* init */
-	pFirmwareImage = NULL;
-	src = RTMP_FIRMWARE_FILE_NAME;
-
-	/* save uid and gid used for filesystem access.
-	   set user and group to 0 (root) */
-	orgfsuid = current->fsuid;
-	orgfsgid = current->fsgid;
-	current->fsuid = current->fsgid = 0;
-    orgfs = get_fs();
-    set_fs(KERNEL_DS);
-
-	pAd->FirmwareVersion = (FIRMWARE_MAJOR_VERSION << 8) + \
-						   FIRMWARE_MINOR_VERSION;
-
-
-	/* allocate firmware buffer */
-    pFirmwareImage = kmalloc(MAX_FIRMWARE_IMAGE_SIZE, MEM_ALLOC_FLAG);
-    if (pFirmwareImage == NULL)
-	{
-		/* allocate fail, use default firmware array in firmware.h */
-		printk("%s - Allocate memory fail!\n", __FUNCTION__);
-		NICLF_DEFAULT_USE();
-    }
-	else
-	{
-		/* allocate ok! zero the firmware buffer */
-		memset(pFirmwareImage, 0x00, MAX_FIRMWARE_IMAGE_SIZE);
-	} /* End of if */
-
-
-	/* if ok, read firmware file from *.bin file */
-	if (flg_default_firm_use == FALSE)
-	{
-		do
-		{
-			/* open the bin file */
-			srcf = filp_open(src, O_RDONLY, 0);
-
-			if (IS_ERR(srcf))
-			{
-				printk("%s - Error %ld opening %s\n",
-					   __FUNCTION__, -PTR_ERR(srcf), src);
-				NICLF_DEFAULT_USE();
-				break;
-			} /* End of if */
-
-			/* the object must have a read method */
-			if ((srcf->f_op == NULL) || (srcf->f_op->read == NULL))
-			{
-				printk("%s - %s does not have a write method\n", __FUNCTION__, src);
-				NICLF_DEFAULT_USE();
-				break;
-			} /* End of if */
-
-			/* read the firmware from the file *.bin */
-			FileLength = srcf->f_op->read(srcf,
-										  pFirmwareImage,
-										  MAX_FIRMWARE_IMAGE_SIZE,
-										  &srcf->f_pos);
-
-			if (FileLength != MAX_FIRMWARE_IMAGE_SIZE)
-			{
-				printk("%s: error file length (=%d) in RT2860AP.BIN\n",
-					   __FUNCTION__, FileLength);
-				NICLF_DEFAULT_USE();
-				break;
-			}
-			else
-			{
-				PUCHAR ptr = pFirmwareImage;
-				USHORT crc = 0xffff;
-
-
-				/* calculate firmware CRC */
-				for(i=0; i<(MAX_FIRMWARE_IMAGE_SIZE-2); i++, ptr++)
-					crc = ByteCRC16(BitReverse(*ptr), crc);
-				/* End of for */
-
-				if ((pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-2] != \
-								(UCHAR)BitReverse((UCHAR)(crc>>8))) ||
-					(pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-1] != \
-								(UCHAR)BitReverse((UCHAR)crc)))
-				{
-					/* CRC fail */
-					printk("%s: CRC = 0x%02x 0x%02x "
-						   "error, should be 0x%02x 0x%02x\n",
-						   __FUNCTION__,
-						   pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-2],
-						   pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-1],
-						   (UCHAR)(crc>>8), (UCHAR)(crc));
-					NICLF_DEFAULT_USE();
-					break;
-				}
-				else
-				{
-					/* firmware is ok */
-					pAd->FirmwareVersion = \
-						(pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-4] << 8) +
-						pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-3];
-
-					/* check if firmware version of the file is too old */
-					if ((pAd->FirmwareVersion) < \
-											((FIRMWARE_MAJOR_VERSION << 8) +
-									  	 	 FIRMWARE_MINOR_VERSION))
-					{
-						printk("%s: firmware version too old!\n", __FUNCTION__);
-						NICLF_DEFAULT_USE();
-						break;
-					} /* End of if */
-				} /* End of if */
-
-				DBGPRINT(RT_DEBUG_TRACE,
-						 ("NICLoadFirmware: CRC ok, ver=%d.%d\n",
-						  pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-4],
-						  pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-3]));
-			} /* End of if (FileLength == MAX_FIRMWARE_IMAGE_SIZE) */
-			break;
-		} while(TRUE);
-
-		/* close firmware file */
-		if (IS_ERR(srcf))
-			;
-		else
-		{
-			retval = filp_close(srcf, NULL);
-			if (retval)
-			{
-				DBGPRINT(RT_DEBUG_ERROR,
-						 ("--> Error %d closing %s\n", -retval, src));
-			} /* End of if */
-		} /* End of if */
-	} /* End of if */
-
-
-	/* write firmware to ASIC */
-	if (flg_default_firm_use == TRUE)
-	{
-		/* use default fimeware, free allocated buffer */
-		if (pFirmwareImage != NULL)
-			kfree(pFirmwareImage);
-		/* End of if */
-
-		/* use default *.bin array */
-		pFirmwareImage = FirmwareImage;
-		FileLength = sizeof(FirmwareImage);
-	} /* End of if */
-
-	/* enable Host program ram write selection */
-	RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0x10000);
-
-	for(i=0; i<FileLength; i+=4)
-	{
-		firm = pFirmwareImage[i] +
-			   (pFirmwareImage[i+3] << 24) +
-			   (pFirmwareImage[i+2] << 16) +
-			   (pFirmwareImage[i+1] << 8);
-
-		RTMP_IO_WRITE32(pAd, FIRMWARE_IMAGE_BASE + i, firm);
-	} /* End of for */
-
-	RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0x00000);
-	RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0x00001);
-
-	/* initialize BBP R/W access agent */
-	RTMP_IO_WRITE32(pAd, H2M_BBP_AGENT, 0);
-	RTMP_IO_WRITE32(pAd, H2M_MAILBOX_CSR, 0);
-
-	if (flg_default_firm_use == FALSE)
-	{
-		/* use file firmware, free allocated buffer */
-		if (pFirmwareImage != NULL)
-			kfree(pFirmwareImage);
-		/* End of if */
-	} /* End of if */
-
-	set_fs(orgfs);
-	current->fsuid = orgfsuid;
-	current->fsgid = orgfsgid;
-#else
-
-	NDIS_STATUS		Status = NDIS_STATUS_SUCCESS;
-	PUCHAR			pFirmwareImage;
-	ULONG			FileLength, Index;
-	//ULONG			firm;
-	UINT32			MacReg = 0;
-	UINT32			Version = (pAd->MACVersion >> 16);
-
-	pFirmwareImage = FirmwareImage;
-	FileLength = sizeof(FirmwareImage);
-
-	// New 8k byte firmware size for RT3071/RT3072
-	//printk("Usb Chip\n");
-	if (FIRMWAREIMAGE_LENGTH == FIRMWAREIMAGE_MAX_LENGTH)
-	//The firmware image consists of two parts. One is the origianl and the other is the new.
-	//Use Second Part
-	{
-#ifdef RT2870
-		if ((Version != 0x2860) && (Version != 0x2872) && (Version != 0x3070))
-		{	// Use Firmware V2.
-			//printk("KH:Use New Version,part2\n");
-			pFirmwareImage = (PUCHAR)&FirmwareImage[FIRMWAREIMAGEV1_LENGTH];
-			FileLength = FIRMWAREIMAGEV2_LENGTH;
-		}
-		else
-		{
-			//printk("KH:Use New Version,part1\n");
-			pFirmwareImage = FirmwareImage;
-			FileLength = FIRMWAREIMAGEV1_LENGTH;
-		}
-#endif // RT2870 //
-	}
-	else
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("KH: bin file should be 8KB.\n"));
-		Status = NDIS_STATUS_FAILURE;
-	}
-
-	RT28XX_WRITE_FIRMWARE(pAd, pFirmwareImage, FileLength);
-
-#endif
-
-	/* check if MCU is ready */
-	Index = 0;
-	do
-	{
-		RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &MacReg);
-
-		if (MacReg & 0x80)
-			break;
-
-		RTMPusecDelay(1000);
-	} while (Index++ < 1000);
-
-    if (Index >= 1000)
-	{
-		Status = NDIS_STATUS_FAILURE;
-		DBGPRINT(RT_DEBUG_ERROR, ("NICLoadFirmware: MCU is not ready\n\n\n"));
-	} /* End of if */
-
-    DBGPRINT(RT_DEBUG_TRACE,
-			 ("<=== %s (status=%d)\n", __FUNCTION__, Status));
-    return Status;
-} /* End of NICLoadFirmware */
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Load Tx rate switching parameters
-
-	Arguments:
-		Adapter						Pointer to our adapter
-
-	Return Value:
-		NDIS_STATUS_SUCCESS         firmware image load ok
-		NDIS_STATUS_FAILURE         image not found
-
-	IRQL = PASSIVE_LEVEL
-
-	Rate Table Format:
-		1. (B0: Valid Item number) (B1:Initial item from zero)
-		2. Item Number(Dec)      Mode(Hex)     Current MCS(Dec)    TrainUp(Dec)    TrainDown(Dec)
-
-	========================================================================
-*/
-NDIS_STATUS NICLoadRateSwitchingParams(
-	IN PRTMP_ADAPTER pAd)
-{
-	return NDIS_STATUS_SUCCESS;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		if  pSrc1 all zero with length Length, return 0.
-		If not all zero, return 1
-
-	Arguments:
-		pSrc1
-
-	Return Value:
-		1:			not all zero
-		0:			all zero
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-ULONG	RTMPNotAllZero(
-	IN	PVOID	pSrc1,
-	IN	ULONG	Length)
-{
-	PUCHAR	pMem1;
-	ULONG	Index = 0;
-
-	pMem1 = (PUCHAR) pSrc1;
-
-	for (Index = 0; Index < Length; Index++)
-	{
-		if (pMem1[Index] != 0x0)
-		{
-			break;
-		}
-	}
-
-	if (Index == Length)
-	{
-		return (0);
-	}
-	else
-	{
-		return (1);
-	}
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Compare two memory block
-
-	Arguments:
-		pSrc1		Pointer to first memory address
-		pSrc2		Pointer to second memory address
-
-	Return Value:
-		0:			memory is equal
-		1:			pSrc1 memory is larger
-		2:			pSrc2 memory is larger
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-ULONG	RTMPCompareMemory(
-	IN	PVOID	pSrc1,
-	IN	PVOID	pSrc2,
-	IN	ULONG	Length)
-{
-	PUCHAR	pMem1;
-	PUCHAR	pMem2;
-	ULONG	Index = 0;
-
-	pMem1 = (PUCHAR) pSrc1;
-	pMem2 = (PUCHAR) pSrc2;
-
-	for (Index = 0; Index < Length; Index++)
-	{
-		if (pMem1[Index] > pMem2[Index])
-			return (1);
-		else if (pMem1[Index] < pMem2[Index])
-			return (2);
-	}
-
-	// Equal
-	return (0);
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Zero out memory block
-
-	Arguments:
-		pSrc1		Pointer to memory address
-		Length		Size
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPZeroMemory(
-	IN	PVOID	pSrc,
-	IN	ULONG	Length)
-{
-	PUCHAR	pMem;
-	ULONG	Index = 0;
-
-	pMem = (PUCHAR) pSrc;
-
-	for (Index = 0; Index < Length; Index++)
-	{
-		pMem[Index] = 0x00;
-	}
-}
-
-VOID	RTMPFillMemory(
-	IN	PVOID	pSrc,
-	IN	ULONG	Length,
-	IN	UCHAR	Fill)
-{
-	PUCHAR	pMem;
-	ULONG	Index = 0;
-
-	pMem = (PUCHAR) pSrc;
-
-	for (Index = 0; Index < Length; Index++)
-	{
-		pMem[Index] = Fill;
-	}
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Copy data from memory block 1 to memory block 2
-
-	Arguments:
-		pDest		Pointer to destination memory address
-		pSrc		Pointer to source memory address
-		Length		Copy size
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPMoveMemory(
-	OUT	PVOID	pDest,
-	IN	PVOID	pSrc,
-	IN	ULONG	Length)
-{
-	PUCHAR	pMem1;
-	PUCHAR	pMem2;
-	UINT	Index;
-
-	ASSERT((Length==0) || (pDest && pSrc));
-
-	pMem1 = (PUCHAR) pDest;
-	pMem2 = (PUCHAR) pSrc;
-
-	for (Index = 0; Index < Length; Index++)
-	{
-		pMem1[Index] = pMem2[Index];
-	}
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Initialize port configuration structure
-
-	Arguments:
-		Adapter						Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	UserCfgInit(
-	IN	PRTMP_ADAPTER pAd)
-{
-//	EDCA_PARM DefaultEdcaParm;
-    UINT key_index, bss_index;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("--> UserCfgInit\n"));
-
-	//
-	//  part I. intialize common configuration
-	//
-#ifdef RT2870
-	pAd->BulkOutReq = 0;
-
-	pAd->BulkOutComplete = 0;
-	pAd->BulkOutCompleteOther = 0;
-	pAd->BulkOutCompleteCancel = 0;
-	pAd->BulkInReq = 0;
-	pAd->BulkInComplete = 0;
-	pAd->BulkInCompleteFail = 0;
-
-	//pAd->QuickTimerP = 100;
-	//pAd->TurnAggrBulkInCount = 0;
-	pAd->bUsbTxBulkAggre = 0;
-
-	// init as unsed value to ensure driver will set to MCU once.
-	pAd->LedIndicatorStregth = 0xFF;
-
-	pAd->CommonCfg.MaxPktOneTxBulk = 2;
-	pAd->CommonCfg.TxBulkFactor = 1;
-	pAd->CommonCfg.RxBulkFactor =1;
-
-	pAd->CommonCfg.TxPower = 100; //mW
-
-	NdisZeroMemory(&pAd->CommonCfg.IOTestParm, sizeof(pAd->CommonCfg.IOTestParm));
-#endif // RT2870 //
-
-	for(key_index=0; key_index<SHARE_KEY_NUM; key_index++)
-	{
-		for(bss_index = 0; bss_index < MAX_MBSSID_NUM; bss_index++)
-		{
-			pAd->SharedKey[bss_index][key_index].KeyLen = 0;
-			pAd->SharedKey[bss_index][key_index].CipherAlg = CIPHER_NONE;
-        } /* End of for */
-    } /* End of for */
-
-	pAd->EepromAccess = FALSE;
-
-	pAd->Antenna.word = 0;
-	pAd->CommonCfg.BBPCurrentBW = BW_20;
-
-	pAd->LedCntl.word = 0;
-
-	pAd->bAutoTxAgcA = FALSE;			// Default is OFF
-	pAd->bAutoTxAgcG = FALSE;			// Default is OFF
-	pAd->RfIcType = RFIC_2820;
-
-	// Init timer for reset complete event
-	pAd->CommonCfg.CentralChannel = 1;
-	pAd->bForcePrintTX = FALSE;
-	pAd->bForcePrintRX = FALSE;
-	pAd->bStaFifoTest = FALSE;
-	pAd->bProtectionTest = FALSE;
-	pAd->bHCCATest = FALSE;
-	pAd->bGenOneHCCA = FALSE;
-	pAd->CommonCfg.Dsifs = 10;      // in units of usec
-	pAd->CommonCfg.TxPower = 100; //mW
-	pAd->CommonCfg.TxPowerPercentage = 0xffffffff; // AUTO
-	pAd->CommonCfg.TxPowerDefault = 0xffffffff; // AUTO
-	pAd->CommonCfg.TxPreamble = Rt802_11PreambleAuto; // use Long preamble on TX by defaut
-	pAd->CommonCfg.bUseZeroToDisableFragment = FALSE;
-	pAd->CommonCfg.RtsThreshold = 2347;
-	pAd->CommonCfg.FragmentThreshold = 2346;
-	pAd->CommonCfg.UseBGProtection = 0;    // 0: AUTO
-	pAd->CommonCfg.bEnableTxBurst = TRUE; //0;
-	pAd->CommonCfg.PhyMode = 0xff;     // unknown
-	pAd->CommonCfg.BandState = UNKNOWN_BAND;
-	pAd->CommonCfg.RadarDetect.CSPeriod = 10;
-	pAd->CommonCfg.RadarDetect.CSCount = 0;
-	pAd->CommonCfg.RadarDetect.RDMode = RD_NORMAL_MODE;
-	pAd->CommonCfg.RadarDetect.ChMovingTime = 65;
-	pAd->CommonCfg.RadarDetect.LongPulseRadarTh = 3;
-	pAd->CommonCfg.bAPSDCapable = FALSE;
-	pAd->CommonCfg.bNeedSendTriggerFrame = FALSE;
-	pAd->CommonCfg.TriggerTimerCount = 0;
-	pAd->CommonCfg.bAPSDForcePowerSave = FALSE;
-	pAd->CommonCfg.bCountryFlag = FALSE;
-	pAd->CommonCfg.TxStream = 0;
-	pAd->CommonCfg.RxStream = 0;
-
-	NdisZeroMemory(&pAd->BeaconTxWI, sizeof(pAd->BeaconTxWI));
-
-#ifdef DOT11_N_SUPPORT
-	NdisZeroMemory(&pAd->CommonCfg.HtCapability, sizeof(pAd->CommonCfg.HtCapability));
-	pAd->HTCEnable = FALSE;
-	pAd->bBroadComHT = FALSE;
-	pAd->CommonCfg.bRdg = FALSE;
-
-#ifdef DOT11N_DRAFT3
-	pAd->CommonCfg.Dot11OBssScanPassiveDwell = dot11OBSSScanPassiveDwell;	// Unit : TU. 5~1000
-	pAd->CommonCfg.Dot11OBssScanActiveDwell = dot11OBSSScanActiveDwell;	// Unit : TU. 10~1000
-	pAd->CommonCfg.Dot11BssWidthTriggerScanInt = dot11BSSWidthTriggerScanInterval;	// Unit : Second
-	pAd->CommonCfg.Dot11OBssScanPassiveTotalPerChannel = dot11OBSSScanPassiveTotalPerChannel;	// Unit : TU. 200~10000
-	pAd->CommonCfg.Dot11OBssScanActiveTotalPerChannel = dot11OBSSScanActiveTotalPerChannel;	// Unit : TU. 20~10000
-	pAd->CommonCfg.Dot11BssWidthChanTranDelayFactor = dot11BSSWidthChannelTransactionDelayFactor;
-	pAd->CommonCfg.Dot11OBssScanActivityThre = dot11BSSScanActivityThreshold;	// Unit : percentage
-	pAd->CommonCfg.Dot11BssWidthChanTranDelay = (pAd->CommonCfg.Dot11BssWidthTriggerScanInt * pAd->CommonCfg.Dot11BssWidthChanTranDelayFactor);
-#endif  // DOT11N_DRAFT3 //
-
-	NdisZeroMemory(&pAd->CommonCfg.AddHTInfo, sizeof(pAd->CommonCfg.AddHTInfo));
-	pAd->CommonCfg.BACapability.field.MMPSmode = MMPS_ENABLE;
-	pAd->CommonCfg.BACapability.field.MpduDensity = 0;
-	pAd->CommonCfg.BACapability.field.Policy = IMMED_BA;
-	pAd->CommonCfg.BACapability.field.RxBAWinLimit = 64; //32;
-	pAd->CommonCfg.BACapability.field.TxBAWinLimit = 64; //32;
-	DBGPRINT(RT_DEBUG_TRACE, ("--> UserCfgInit. BACapability = 0x%x\n", pAd->CommonCfg.BACapability.word));
-
-	pAd->CommonCfg.BACapability.field.AutoBA = FALSE;
-	BATableInit(pAd, &pAd->BATable);
-
-	pAd->CommonCfg.bExtChannelSwitchAnnouncement = 1;
-	pAd->CommonCfg.bHTProtect = 1;
-	pAd->CommonCfg.bMIMOPSEnable = TRUE;
-	pAd->CommonCfg.bBADecline = FALSE;
-	pAd->CommonCfg.bDisableReordering = FALSE;
-
-	pAd->CommonCfg.TxBASize = 7;
-
-	pAd->CommonCfg.REGBACapability.word = pAd->CommonCfg.BACapability.word;
-#endif // DOT11_N_SUPPORT //
-
-	//pAd->CommonCfg.HTPhyMode.field.BW = BW_20;
-	//pAd->CommonCfg.HTPhyMode.field.MCS = MCS_AUTO;
-	//pAd->CommonCfg.HTPhyMode.field.ShortGI = GI_800;
-	//pAd->CommonCfg.HTPhyMode.field.STBC = STBC_NONE;
-	pAd->CommonCfg.TxRate = RATE_6;
-
-	pAd->CommonCfg.MlmeTransmit.field.MCS = MCS_RATE_6;
-	pAd->CommonCfg.MlmeTransmit.field.BW = BW_20;
-	pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM;
-
-	pAd->CommonCfg.BeaconPeriod = 100;     // in mSec
-
-	//
-	// part II. intialize STA specific configuration
-	//
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		RX_FILTER_SET_FLAG(pAd, fRX_FILTER_ACCEPT_DIRECT);
-		RX_FILTER_CLEAR_FLAG(pAd, fRX_FILTER_ACCEPT_MULTICAST);
-		RX_FILTER_SET_FLAG(pAd, fRX_FILTER_ACCEPT_BROADCAST);
-		RX_FILTER_SET_FLAG(pAd, fRX_FILTER_ACCEPT_ALL_MULTICAST);
-
-		pAd->StaCfg.Psm = PWR_ACTIVE;
-
-		pAd->StaCfg.OrigWepStatus = Ndis802_11EncryptionDisabled;
-		pAd->StaCfg.PairCipher = Ndis802_11EncryptionDisabled;
-		pAd->StaCfg.GroupCipher = Ndis802_11EncryptionDisabled;
-		pAd->StaCfg.bMixCipher = FALSE;
-		pAd->StaCfg.DefaultKeyId = 0;
-
-		// 802.1x port control
-		pAd->StaCfg.PrivacyFilter = Ndis802_11PrivFilter8021xWEP;
-		pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-		pAd->StaCfg.LastMicErrorTime = 0;
-		pAd->StaCfg.MicErrCnt        = 0;
-		pAd->StaCfg.bBlockAssoc      = FALSE;
-		pAd->StaCfg.WpaState         = SS_NOTUSE;
-
-		pAd->CommonCfg.NdisRadioStateOff = FALSE;		// New to support microsoft disable radio with OID command
-
-		pAd->StaCfg.RssiTrigger = 0;
-		NdisZeroMemory(&pAd->StaCfg.RssiSample, sizeof(RSSI_SAMPLE));
-		pAd->StaCfg.RssiTriggerMode = RSSI_TRIGGERED_UPON_BELOW_THRESHOLD;
-		pAd->StaCfg.AtimWin = 0;
-		pAd->StaCfg.DefaultListenCount = 3;//default listen count;
-		pAd->StaCfg.BssType = BSS_INFRA;  // BSS_INFRA or BSS_ADHOC or BSS_MONITOR
-		pAd->StaCfg.bScanReqIsFromWebUI = FALSE;
-		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
-		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_WAKEUP_NOW);
-
-		pAd->StaCfg.bAutoTxRateSwitch = TRUE;
-		pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
-	}
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-	pAd->StaCfg.IEEE80211dClientMode = Rt802_11_D_None;
-#endif // EXT_BUILD_CHANNEL_LIST //
-#endif // CONFIG_STA_SUPPORT //
-
-	// global variables mXXXX used in MAC protocol state machines
-	OPSTATUS_SET_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM);
-	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_ADHOC_ON);
-	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_INFRA_ON);
-
-	// PHY specification
-	pAd->CommonCfg.PhyMode = PHY_11BG_MIXED;		// default PHY mode
-	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);  // CCK use LONG preamble
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// user desired power mode
-		pAd->StaCfg.WindowsPowerMode = Ndis802_11PowerModeCAM;
-		pAd->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeCAM;
-		pAd->StaCfg.bWindowsACCAMEnable = FALSE;
-
-#ifdef LEAP_SUPPORT
-		// CCX v1.0 releated init value
-		RTMPInitTimer(pAd, &pAd->StaCfg.LeapAuthTimer, GET_TIMER_FUNCTION(LeapAuthTimeout), pAd, FALSE);
-		pAd->StaCfg.LeapAuthMode = CISCO_AuthModeLEAPNone;
-		pAd->StaCfg.bCkipOn = FALSE;
-#endif // LEAP_SUPPORT //
-
-		RTMPInitTimer(pAd, &pAd->StaCfg.StaQuickResponeForRateUpTimer, GET_TIMER_FUNCTION(StaQuickResponeForRateUpExec), pAd, FALSE);
-		pAd->StaCfg.StaQuickResponeForRateUpTimerRunning = FALSE;
-
-		// Patch for Ndtest
-		pAd->StaCfg.ScanCnt = 0;
-
-		// CCX 2.0 control flag init
-		pAd->StaCfg.CCXEnable = FALSE;
-		pAd->StaCfg.CCXReqType = MSRN_TYPE_UNUSED;
-		pAd->StaCfg.CCXQosECWMin	= 4;
-		pAd->StaCfg.CCXQosECWMax	= 10;
-
-		pAd->StaCfg.bHwRadio  = TRUE; // Default Hardware Radio status is On
-		pAd->StaCfg.bSwRadio  = TRUE; // Default Software Radio status is On
-		pAd->StaCfg.bRadio    = TRUE; // bHwRadio && bSwRadio
-		pAd->StaCfg.bHardwareRadio = FALSE;		// Default is OFF
-		pAd->StaCfg.bShowHiddenSSID = FALSE;		// Default no show
-
-		// Nitro mode control
-		pAd->StaCfg.bAutoReconnect = TRUE;
-
-		// Save the init time as last scan time, the system should do scan after 2 seconds.
-		// This patch is for driver wake up from standby mode, system will do scan right away.
-		pAd->StaCfg.LastScanTime = 0;
-		NdisZeroMemory(pAd->nickname, IW_ESSID_MAX_SIZE+1);
-		sprintf(pAd->nickname, "%s", STA_NIC_DEVICE_NAME);
-		RTMPInitTimer(pAd, &pAd->StaCfg.WpaDisassocAndBlockAssocTimer, GET_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc), pAd, FALSE);
-#ifdef WPA_SUPPLICANT_SUPPORT
-		pAd->StaCfg.IEEE8021X = FALSE;
-		pAd->StaCfg.IEEE8021x_required_keys = FALSE;
-		pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_DISABLE;
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-		pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_ENABLE;
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	// Default for extra information is not valid
-	pAd->ExtraInfo = EXTRA_INFO_CLEAR;
-
-	// Default Config change flag
-	pAd->bConfigChanged = FALSE;
-
-	//
-	// part III. AP configurations
-	//
-
-
-	//
-	// part IV. others
-	//
-	// dynamic BBP R66:sensibity tuning to overcome background noise
-	pAd->BbpTuning.bEnable                = TRUE;
-	pAd->BbpTuning.FalseCcaLowerThreshold = 100;
-	pAd->BbpTuning.FalseCcaUpperThreshold = 512;
-	pAd->BbpTuning.R66Delta               = 4;
-	pAd->Mlme.bEnableAutoAntennaCheck = TRUE;
-
-	//
-	// Also initial R66CurrentValue, RTUSBResumeMsduTransmission might use this value.
-	// if not initial this value, the default value will be 0.
-	//
-	pAd->BbpTuning.R66CurrentValue = 0x38;
-
-	pAd->Bbp94 = BBPR94_DEFAULT;
-	pAd->BbpForCCK = FALSE;
-
-	// Default is FALSE for test bit 1
-	//pAd->bTest1 = FALSE;
-
-	// initialize MAC table and allocate spin lock
-	NdisZeroMemory(&pAd->MacTab, sizeof(MAC_TABLE));
-	InitializeQueueHeader(&pAd->MacTab.McastPsQueue);
-	NdisAllocateSpinLock(&pAd->MacTabLock);
-
-	//RTMPInitTimer(pAd, &pAd->RECBATimer, RECBATimerTimeout, pAd, TRUE);
-	//RTMPSetTimer(&pAd->RECBATimer, REORDER_EXEC_INTV);
-
-#ifdef RALINK_ATE
-	NdisZeroMemory(&pAd->ate, sizeof(ATE_INFO));
-	pAd->ate.Mode = ATE_STOP;
-	pAd->ate.TxCount = 200;/* to exceed TX_RING_SIZE ... */
-	pAd->ate.TxLength = 1024;
-	pAd->ate.TxWI.ShortGI = 0;// LONG GI : 800 ns
-	pAd->ate.TxWI.PHYMODE = MODE_CCK;
-	pAd->ate.TxWI.MCS = 3;
-	pAd->ate.TxWI.BW = BW_20;
-	pAd->ate.Channel = 1;
-	pAd->ate.QID = QID_AC_BE;
-	pAd->ate.Addr1[0] = 0x00;
-	pAd->ate.Addr1[1] = 0x11;
-	pAd->ate.Addr1[2] = 0x22;
-	pAd->ate.Addr1[3] = 0xAA;
-	pAd->ate.Addr1[4] = 0xBB;
-	pAd->ate.Addr1[5] = 0xCC;
-	NdisMoveMemory(pAd->ate.Addr2, pAd->ate.Addr1, ETH_LENGTH_OF_ADDRESS);
-	NdisMoveMemory(pAd->ate.Addr3, pAd->ate.Addr1, ETH_LENGTH_OF_ADDRESS);
-	pAd->ate.bRxFer = 0;
-	pAd->ate.bQATxStart = FALSE;
-	pAd->ate.bQARxStart = FALSE;
-#ifdef RALINK_28xx_QA
-	//pAd->ate.Repeat = 0;
-	pAd->ate.TxStatus = 0;
-	pAd->ate.AtePid = 0;
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
-
-	pAd->CommonCfg.bWiFiTest = FALSE;
-
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<-- UserCfgInit\n"));
-}
-
-// IRQL = PASSIVE_LEVEL
-UCHAR BtoH(char ch)
-{
-	if (ch >= '0' && ch <= '9') return (ch - '0');        // Handle numerals
-	if (ch >= 'A' && ch <= 'F') return (ch - 'A' + 0xA);  // Handle capitol hex digits
-	if (ch >= 'a' && ch <= 'f') return (ch - 'a' + 0xA);  // Handle small hex digits
-	return(255);
-}
-
-//
-//  FUNCTION: AtoH(char *, UCHAR *, int)
-//
-//  PURPOSE:  Converts ascii string to network order hex
-//
-//  PARAMETERS:
-//    src    - pointer to input ascii string
-//    dest   - pointer to output hex
-//    destlen - size of dest
-//
-//  COMMENTS:
-//
-//    2 ascii bytes make a hex byte so must put 1st ascii byte of pair
-//    into upper nibble and 2nd ascii byte of pair into lower nibble.
-//
-// IRQL = PASSIVE_LEVEL
-
-void AtoH(char * src, UCHAR * dest, int destlen)
-{
-	char * srcptr;
-	PUCHAR destTemp;
-
-	srcptr = src;
-	destTemp = (PUCHAR) dest;
-
-	while(destlen--)
-	{
-		*destTemp = BtoH(*srcptr++) << 4;    // Put 1st ascii byte in upper nibble.
-		*destTemp += BtoH(*srcptr++);      // Add 2nd ascii byte to above.
-		destTemp++;
-	}
-}
-
-VOID	RTMPPatchMacBbpBug(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	ULONG	Index;
-
-	// Initialize BBP register to default value
-	for (Index = 0; Index < NUM_BBP_REG_PARMS; Index++)
-	{
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBPRegTable[Index].Register, (UCHAR)BBPRegTable[Index].Value);
-	}
-
-	// Initialize RF register to default value
-	AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
-	AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-
-	// Re-init BBP register from EEPROM value
-	NICInitAsicFromEEPROM(pAd);
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Init timer objects
-
-	Arguments:
-		pAd			Pointer to our adapter
-		pTimer				Timer structure
-		pTimerFunc			Function to execute when timer expired
-		Repeat				Ture for period timer
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPInitTimer(
-	IN	PRTMP_ADAPTER			pAd,
-	IN	PRALINK_TIMER_STRUCT	pTimer,
-	IN	PVOID					pTimerFunc,
-	IN	PVOID					pData,
-	IN	BOOLEAN					Repeat)
-{
-	//
-	// Set Valid to TRUE for later used.
-	// It will crash if we cancel a timer or set a timer
-	// that we haven't initialize before.
-	//
-	pTimer->Valid      = TRUE;
-
-	pTimer->PeriodicType = Repeat;
-	pTimer->State      = FALSE;
-	pTimer->cookie = (ULONG) pData;
-
-#ifdef RT2870
-	pTimer->pAd = pAd;
-#endif // RT2870 //
-
-	RTMP_OS_Init_Timer(pAd,	&pTimer->TimerObj,	pTimerFunc, (PVOID) pTimer);
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Init timer objects
-
-	Arguments:
-		pTimer				Timer structure
-		Value				Timer value in milliseconds
-
-	Return Value:
-		None
-
-	Note:
-		To use this routine, must call RTMPInitTimer before.
-
-	========================================================================
-*/
-VOID	RTMPSetTimer(
-	IN	PRALINK_TIMER_STRUCT	pTimer,
-	IN	ULONG					Value)
-{
-	if (pTimer->Valid)
-	{
-		pTimer->TimerValue = Value;
-		pTimer->State      = FALSE;
-		if (pTimer->PeriodicType == TRUE)
-		{
-			pTimer->Repeat = TRUE;
-			RTMP_SetPeriodicTimer(&pTimer->TimerObj, Value);
-		}
-		else
-		{
-			pTimer->Repeat = FALSE;
-			RTMP_OS_Add_Timer(&pTimer->TimerObj, Value);
-		}
-	}
-	else
-	{
-		DBGPRINT_ERR(("RTMPSetTimer failed, Timer hasn't been initialize!\n"));
-	}
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Init timer objects
-
-	Arguments:
-		pTimer				Timer structure
-		Value				Timer value in milliseconds
-
-	Return Value:
-		None
-
-	Note:
-		To use this routine, must call RTMPInitTimer before.
-
-	========================================================================
-*/
-VOID	RTMPModTimer(
-	IN	PRALINK_TIMER_STRUCT	pTimer,
-	IN	ULONG					Value)
-{
-	BOOLEAN	Cancel;
-
-	if (pTimer->Valid)
-	{
-		pTimer->TimerValue = Value;
-		pTimer->State      = FALSE;
-		if (pTimer->PeriodicType == TRUE)
-		{
-			RTMPCancelTimer(pTimer, &Cancel);
-			RTMPSetTimer(pTimer, Value);
-		}
-		else
-		{
-			RTMP_OS_Mod_Timer(&pTimer->TimerObj, Value);
-		}
-	}
-	else
-	{
-		DBGPRINT_ERR(("RTMPModTimer failed, Timer hasn't been initialize!\n"));
-	}
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Cancel timer objects
-
-	Arguments:
-		Adapter						Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-		1.) To use this routine, must call RTMPInitTimer before.
-		2.) Reset NIC to initial state AS IS system boot up time.
-
-	========================================================================
-*/
-VOID	RTMPCancelTimer(
-	IN	PRALINK_TIMER_STRUCT	pTimer,
-	OUT	BOOLEAN					*pCancelled)
-{
-	if (pTimer->Valid)
-	{
-		if (pTimer->State == FALSE)
-			pTimer->Repeat = FALSE;
-			RTMP_OS_Del_Timer(&pTimer->TimerObj, pCancelled);
-
-		if (*pCancelled == TRUE)
-			pTimer->State = TRUE;
-
-#ifdef RT2870
-		// We need to go-through the TimerQ to findout this timer handler and remove it if
-		//		it's still waiting for execution.
-
-		RT2870_TimerQ_Remove(pTimer->pAd, pTimer);
-#endif // RT2870 //
-	}
-	else
-	{
-		//
-		// NdisMCancelTimer just canced the timer and not mean release the timer.
-		// And don't set the "Valid" to False. So that we can use this timer again.
-		//
-		DBGPRINT_ERR(("RTMPCancelTimer failed, Timer hasn't been initialize!\n"));
-	}
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Set LED Status
-
-	Arguments:
-		pAd						Pointer to our adapter
-		Status					LED Status
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID RTMPSetLED(
-	IN PRTMP_ADAPTER 	pAd,
-	IN UCHAR			Status)
-{
-	//ULONG			data;
-	UCHAR			HighByte = 0;
-	UCHAR			LowByte;
-
-// In ATE mode of RT2860 AP/STA, we have erased 8051 firmware.
-// So LED mode is not supported when ATE is running.
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-	LowByte = pAd->LedCntl.field.LedMode&0x7f;
-	switch (Status)
-	{
-		case LED_LINK_DOWN:
-			HighByte = 0x20;
-			AsicSendCommandToMcu(pAd, 0x50, 0xff, LowByte, HighByte);
-			pAd->LedIndicatorStregth = 0;
-			break;
-		case LED_LINK_UP:
-			if (pAd->CommonCfg.Channel > 14)
-				HighByte = 0xa0;
-			else
-				HighByte = 0x60;
-			AsicSendCommandToMcu(pAd, 0x50, 0xff, LowByte, HighByte);
-			break;
-		case LED_RADIO_ON:
-			HighByte = 0x20;
-			AsicSendCommandToMcu(pAd, 0x50, 0xff, LowByte, HighByte);
-			break;
-		case LED_HALT:
-			LowByte = 0; // Driver sets MAC register and MAC controls LED
-		case LED_RADIO_OFF:
-			HighByte = 0;
-			AsicSendCommandToMcu(pAd, 0x50, 0xff, LowByte, HighByte);
-			break;
-        case LED_WPS:
-			HighByte = 0x10;
-			AsicSendCommandToMcu(pAd, 0x50, 0xff, LowByte, HighByte);
-			break;
-		case LED_ON_SITE_SURVEY:
-			HighByte = 0x08;
-			AsicSendCommandToMcu(pAd, 0x50, 0xff, LowByte, HighByte);
-			break;
-		case LED_POWER_UP:
-			HighByte = 0x04;
-			AsicSendCommandToMcu(pAd, 0x50, 0xff, LowByte, HighByte);
-			break;
-		default:
-			DBGPRINT(RT_DEBUG_WARN, ("RTMPSetLED::Unknown Status %d\n", Status));
-			break;
-	}
-
-    //
-	// Keep LED status for LED SiteSurvey mode.
-	// After SiteSurvey, we will set the LED mode to previous status.
-	//
-	if ((Status != LED_ON_SITE_SURVEY) && (Status != LED_POWER_UP))
-		pAd->LedStatus = Status;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetLED::Mode=%d,HighByte=0x%02x,LowByte=0x%02x\n", pAd->LedCntl.field.LedMode, HighByte, LowByte));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Set LED Signal Stregth
-
-	Arguments:
-		pAd						Pointer to our adapter
-		Dbm						Signal Stregth
-
-	Return Value:
-		None
-
-	IRQL = PASSIVE_LEVEL
-
-	Note:
-		Can be run on any IRQL level.
-
-		According to Microsoft Zero Config Wireless Signal Stregth definition as belows.
-		<= -90  No Signal
-		<= -81  Very Low
-		<= -71  Low
-		<= -67  Good
-		<= -57  Very Good
-		 > -57  Excellent
-	========================================================================
-*/
-VOID RTMPSetSignalLED(
-	IN PRTMP_ADAPTER 	pAd,
-	IN NDIS_802_11_RSSI Dbm)
-{
-	UCHAR		nLed = 0;
-
-	//
-	// if not Signal Stregth, then do nothing.
-	//
-	if (pAd->LedCntl.field.LedMode != LED_MODE_SIGNAL_STREGTH)
-	{
-		return;
-	}
-
-	if (Dbm <= -90)
-		nLed = 0;
-	else if (Dbm <= -81)
-		nLed = 1;
-	else if (Dbm <= -71)
-		nLed = 3;
-	else if (Dbm <= -67)
-		nLed = 7;
-	else if (Dbm <= -57)
-		nLed = 15;
-	else
-		nLed = 31;
-
-	//
-	// Update Signal Stregth to firmware if changed.
-	//
-	if (pAd->LedIndicatorStregth != nLed)
-	{
-		AsicSendCommandToMcu(pAd, 0x51, 0xff, nLed, pAd->LedCntl.field.Polarity);
-		pAd->LedIndicatorStregth = nLed;
-	}
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Enable RX
-
-	Arguments:
-		pAd						Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL <= DISPATCH_LEVEL
-
-	Note:
-		Before Enable RX, make sure you have enabled Interrupt.
-	========================================================================
-*/
-VOID RTMPEnableRxTx(
-	IN PRTMP_ADAPTER	pAd)
-{
-//	WPDMA_GLO_CFG_STRUC	GloCfg;
-//	ULONG	i = 0;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("==> RTMPEnableRxTx\n"));
-
-	// Enable Rx DMA.
-	RT28XXDMAEnable(pAd);
-
-	// enable RX of MAC block
-	if (pAd->OpMode == OPMODE_AP)
-	{
-		UINT32 rx_filter_flag = APNORMAL;
-
-
-		RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, rx_filter_flag);     // enable RX of DMA block
-	}
-	else
-	{
-		RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, STANORMAL);     // Staion not drop control frame will fail WiFi Certification.
-	}
-
-	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0xc);
-	DBGPRINT(RT_DEBUG_TRACE, ("<== RTMPEnableRxTx\n"));
-}
-
-
+#include "../../rt2870/common/rtmp_init.c"
diff --git a/drivers/staging/rt3070/common/rtmp_tkip.c b/drivers/staging/rt3070/common/rtmp_tkip.c
index bf8986e8367..57a5ee96f31 100644
--- a/drivers/staging/rt3070/common/rtmp_tkip.c
+++ b/drivers/staging/rt3070/common/rtmp_tkip.c
@@ -1,1613 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	rtmp_tkip.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Paul Wu		02-25-02		Initial
-*/
-
-#include	"../rt_config.h"
-
-// Rotation functions on 32 bit values
-#define ROL32( A, n ) \
-	( ((A) << (n)) | ( ((A)>>(32-(n))) & ( (1UL << (n)) - 1 ) ) )
-#define ROR32( A, n ) ROL32( (A), 32-(n) )
-
-UINT Tkip_Sbox_Lower[256] =
-{
-	0xA5,0x84,0x99,0x8D,0x0D,0xBD,0xB1,0x54,
-	0x50,0x03,0xA9,0x7D,0x19,0x62,0xE6,0x9A,
-	0x45,0x9D,0x40,0x87,0x15,0xEB,0xC9,0x0B,
-	0xEC,0x67,0xFD,0xEA,0xBF,0xF7,0x96,0x5B,
-	0xC2,0x1C,0xAE,0x6A,0x5A,0x41,0x02,0x4F,
-	0x5C,0xF4,0x34,0x08,0x93,0x73,0x53,0x3F,
-	0x0C,0x52,0x65,0x5E,0x28,0xA1,0x0F,0xB5,
-	0x09,0x36,0x9B,0x3D,0x26,0x69,0xCD,0x9F,
-	0x1B,0x9E,0x74,0x2E,0x2D,0xB2,0xEE,0xFB,
-	0xF6,0x4D,0x61,0xCE,0x7B,0x3E,0x71,0x97,
-	0xF5,0x68,0x00,0x2C,0x60,0x1F,0xC8,0xED,
-	0xBE,0x46,0xD9,0x4B,0xDE,0xD4,0xE8,0x4A,
-	0x6B,0x2A,0xE5,0x16,0xC5,0xD7,0x55,0x94,
-	0xCF,0x10,0x06,0x81,0xF0,0x44,0xBA,0xE3,
-	0xF3,0xFE,0xC0,0x8A,0xAD,0xBC,0x48,0x04,
-	0xDF,0xC1,0x75,0x63,0x30,0x1A,0x0E,0x6D,
-	0x4C,0x14,0x35,0x2F,0xE1,0xA2,0xCC,0x39,
-	0x57,0xF2,0x82,0x47,0xAC,0xE7,0x2B,0x95,
-	0xA0,0x98,0xD1,0x7F,0x66,0x7E,0xAB,0x83,
-	0xCA,0x29,0xD3,0x3C,0x79,0xE2,0x1D,0x76,
-	0x3B,0x56,0x4E,0x1E,0xDB,0x0A,0x6C,0xE4,
-	0x5D,0x6E,0xEF,0xA6,0xA8,0xA4,0x37,0x8B,
-	0x32,0x43,0x59,0xB7,0x8C,0x64,0xD2,0xE0,
-	0xB4,0xFA,0x07,0x25,0xAF,0x8E,0xE9,0x18,
-	0xD5,0x88,0x6F,0x72,0x24,0xF1,0xC7,0x51,
-	0x23,0x7C,0x9C,0x21,0xDD,0xDC,0x86,0x85,
-	0x90,0x42,0xC4,0xAA,0xD8,0x05,0x01,0x12,
-	0xA3,0x5F,0xF9,0xD0,0x91,0x58,0x27,0xB9,
-	0x38,0x13,0xB3,0x33,0xBB,0x70,0x89,0xA7,
-	0xB6,0x22,0x92,0x20,0x49,0xFF,0x78,0x7A,
-	0x8F,0xF8,0x80,0x17,0xDA,0x31,0xC6,0xB8,
-	0xC3,0xB0,0x77,0x11,0xCB,0xFC,0xD6,0x3A
-};
-
-UINT Tkip_Sbox_Upper[256] =
-{
-	0xC6,0xF8,0xEE,0xF6,0xFF,0xD6,0xDE,0x91,
-	0x60,0x02,0xCE,0x56,0xE7,0xB5,0x4D,0xEC,
-	0x8F,0x1F,0x89,0xFA,0xEF,0xB2,0x8E,0xFB,
-	0x41,0xB3,0x5F,0x45,0x23,0x53,0xE4,0x9B,
-	0x75,0xE1,0x3D,0x4C,0x6C,0x7E,0xF5,0x83,
-	0x68,0x51,0xD1,0xF9,0xE2,0xAB,0x62,0x2A,
-	0x08,0x95,0x46,0x9D,0x30,0x37,0x0A,0x2F,
-	0x0E,0x24,0x1B,0xDF,0xCD,0x4E,0x7F,0xEA,
-	0x12,0x1D,0x58,0x34,0x36,0xDC,0xB4,0x5B,
-	0xA4,0x76,0xB7,0x7D,0x52,0xDD,0x5E,0x13,
-	0xA6,0xB9,0x00,0xC1,0x40,0xE3,0x79,0xB6,
-	0xD4,0x8D,0x67,0x72,0x94,0x98,0xB0,0x85,
-	0xBB,0xC5,0x4F,0xED,0x86,0x9A,0x66,0x11,
-	0x8A,0xE9,0x04,0xFE,0xA0,0x78,0x25,0x4B,
-	0xA2,0x5D,0x80,0x05,0x3F,0x21,0x70,0xF1,
-	0x63,0x77,0xAF,0x42,0x20,0xE5,0xFD,0xBF,
-	0x81,0x18,0x26,0xC3,0xBE,0x35,0x88,0x2E,
-	0x93,0x55,0xFC,0x7A,0xC8,0xBA,0x32,0xE6,
-	0xC0,0x19,0x9E,0xA3,0x44,0x54,0x3B,0x0B,
-	0x8C,0xC7,0x6B,0x28,0xA7,0xBC,0x16,0xAD,
-	0xDB,0x64,0x74,0x14,0x92,0x0C,0x48,0xB8,
-	0x9F,0xBD,0x43,0xC4,0x39,0x31,0xD3,0xF2,
-	0xD5,0x8B,0x6E,0xDA,0x01,0xB1,0x9C,0x49,
-	0xD8,0xAC,0xF3,0xCF,0xCA,0xF4,0x47,0x10,
-	0x6F,0xF0,0x4A,0x5C,0x38,0x57,0x73,0x97,
-	0xCB,0xA1,0xE8,0x3E,0x96,0x61,0x0D,0x0F,
-	0xE0,0x7C,0x71,0xCC,0x90,0x06,0xF7,0x1C,
-	0xC2,0x6A,0xAE,0x69,0x17,0x99,0x3A,0x27,
-	0xD9,0xEB,0x2B,0x22,0xD2,0xA9,0x07,0x33,
-	0x2D,0x3C,0x15,0xC9,0x87,0xAA,0x50,0xA5,
-	0x03,0x59,0x09,0x1A,0x65,0xD7,0x84,0xD0,
-	0x82,0x29,0x5A,0x1E,0x7B,0xA8,0x6D,0x2C
-};
-
-/*****************************/
-/******** SBOX Table *********/
-/*****************************/
-
-UCHAR SboxTable[256] =
-{
-	0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5,
-	0x30, 0x01, 0x67, 0x2b, 0xfe, 0xd7, 0xab, 0x76,
-	0xca, 0x82, 0xc9, 0x7d, 0xfa, 0x59, 0x47, 0xf0,
-	0xad, 0xd4, 0xa2, 0xaf, 0x9c, 0xa4, 0x72, 0xc0,
-	0xb7, 0xfd, 0x93, 0x26, 0x36, 0x3f, 0xf7, 0xcc,
-	0x34, 0xa5, 0xe5, 0xf1, 0x71, 0xd8, 0x31, 0x15,
-	0x04, 0xc7, 0x23, 0xc3, 0x18, 0x96, 0x05, 0x9a,
-	0x07, 0x12, 0x80, 0xe2, 0xeb, 0x27, 0xb2, 0x75,
-	0x09, 0x83, 0x2c, 0x1a, 0x1b, 0x6e, 0x5a, 0xa0,
-	0x52, 0x3b, 0xd6, 0xb3, 0x29, 0xe3, 0x2f, 0x84,
-	0x53, 0xd1, 0x00, 0xed, 0x20, 0xfc, 0xb1, 0x5b,
-	0x6a, 0xcb, 0xbe, 0x39, 0x4a, 0x4c, 0x58, 0xcf,
-	0xd0, 0xef, 0xaa, 0xfb, 0x43, 0x4d, 0x33, 0x85,
-	0x45, 0xf9, 0x02, 0x7f, 0x50, 0x3c, 0x9f, 0xa8,
-	0x51, 0xa3, 0x40, 0x8f, 0x92, 0x9d, 0x38, 0xf5,
-	0xbc, 0xb6, 0xda, 0x21, 0x10, 0xff, 0xf3, 0xd2,
-	0xcd, 0x0c, 0x13, 0xec, 0x5f, 0x97, 0x44, 0x17,
-	0xc4, 0xa7, 0x7e, 0x3d, 0x64, 0x5d, 0x19, 0x73,
-	0x60, 0x81, 0x4f, 0xdc, 0x22, 0x2a, 0x90, 0x88,
-	0x46, 0xee, 0xb8, 0x14, 0xde, 0x5e, 0x0b, 0xdb,
-	0xe0, 0x32, 0x3a, 0x0a, 0x49, 0x06, 0x24, 0x5c,
-	0xc2, 0xd3, 0xac, 0x62, 0x91, 0x95, 0xe4, 0x79,
-	0xe7, 0xc8, 0x37, 0x6d, 0x8d, 0xd5, 0x4e, 0xa9,
-	0x6c, 0x56, 0xf4, 0xea, 0x65, 0x7a, 0xae, 0x08,
-	0xba, 0x78, 0x25, 0x2e, 0x1c, 0xa6, 0xb4, 0xc6,
-	0xe8, 0xdd, 0x74, 0x1f, 0x4b, 0xbd, 0x8b, 0x8a,
-	0x70, 0x3e, 0xb5, 0x66, 0x48, 0x03, 0xf6, 0x0e,
-	0x61, 0x35, 0x57, 0xb9, 0x86, 0xc1, 0x1d, 0x9e,
-	0xe1, 0xf8, 0x98, 0x11, 0x69, 0xd9, 0x8e, 0x94,
-	0x9b, 0x1e, 0x87, 0xe9, 0xce, 0x55, 0x28, 0xdf,
-	0x8c, 0xa1, 0x89, 0x0d, 0xbf, 0xe6, 0x42, 0x68,
-	0x41, 0x99, 0x2d, 0x0f, 0xb0, 0x54, 0xbb, 0x16
-};
-
-VOID xor_32(
-	IN  PUCHAR              a,
-	IN  PUCHAR              b,
-	OUT PUCHAR              out);
-
-VOID xor_128(
-	IN  PUCHAR              a,
-	IN  PUCHAR              b,
-	OUT PUCHAR              out);
-
-VOID next_key(
-	IN  PUCHAR              key,
-	IN  INT                 round);
-
-VOID byte_sub(
-	IN  PUCHAR              in,
-	OUT PUCHAR              out);
-
-VOID shift_row(
-	IN  PUCHAR              in,
-	OUT PUCHAR              out);
-
-VOID mix_column(
-	IN  PUCHAR              in,
-	OUT PUCHAR              out);
-
-UCHAR RTMPCkipSbox(
-	IN  UCHAR               a);
-//
-// Expanded IV for TKIP function.
-//
-typedef	struct	PACKED _IV_CONTROL_
-{
-	union PACKED
-	{
-		struct PACKED
-		{
-			UCHAR		rc0;
-			UCHAR		rc1;
-			UCHAR		rc2;
-
-			union PACKED
-			{
-				struct PACKED
-				{
-#ifdef RT_BIG_ENDIAN
-					UCHAR	KeyID:2;
-					UCHAR	ExtIV:1;
-					UCHAR	Rsvd:5;
-#else
-					UCHAR	Rsvd:5;
-					UCHAR	ExtIV:1;
-					UCHAR	KeyID:2;
-#endif
-				}	field;
-				UCHAR		Byte;
-			}	CONTROL;
-		}	field;
-
-		ULONG	word;
-	}	IV16;
-
-	ULONG	IV32;
-}	TKIP_IV, *PTKIP_IV;
-
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Convert from UCHAR[] to ULONG in a portable way
-
-	Arguments:
-      pMICKey		pointer to MIC Key
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-ULONG	RTMPTkipGetUInt32(
-	IN	PUCHAR	pMICKey)
-{
-	ULONG	res = 0;
-	INT		i;
-
-	for (i = 0; i < 4; i++)
-	{
-		res |= (*pMICKey++) << (8 * i);
-	}
-
-	return res;
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Convert from ULONG to UCHAR[] in a portable way
-
-	Arguments:
-      pDst			pointer to destination for convert ULONG to UCHAR[]
-      val			the value for convert
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPTkipPutUInt32(
-	IN OUT	PUCHAR		pDst,
-	IN		ULONG		val)
-{
-	INT i;
-
-	for(i = 0; i < 4; i++)
-	{
-		*pDst++ = (UCHAR) (val & 0xff);
-		val >>= 8;
-	}
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Set the MIC Key.
-
-	Arguments:
-      pAd		Pointer to our adapter
-      pMICKey		pointer to MIC Key
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID RTMPTkipSetMICKey(
-	IN	PTKIP_KEY_INFO	pTkip,
-	IN	PUCHAR			pMICKey)
-{
-	// Set the key
-	pTkip->K0 = RTMPTkipGetUInt32(pMICKey);
-	pTkip->K1 = RTMPTkipGetUInt32(pMICKey + 4);
-	// and reset the message
-	pTkip->L = pTkip->K0;
-	pTkip->R = pTkip->K1;
-	pTkip->nBytesInM = 0;
-	pTkip->M = 0;
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Calculate the MIC Value.
-
-	Arguments:
-      pAd		Pointer to our adapter
-      uChar			Append this uChar
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPTkipAppendByte(
-	IN	PTKIP_KEY_INFO	pTkip,
-	IN	UCHAR 			uChar)
-{
-	// Append the byte to our word-sized buffer
-	pTkip->M |= (uChar << (8* pTkip->nBytesInM));
-	pTkip->nBytesInM++;
-	// Process the word if it is full.
-	if( pTkip->nBytesInM >= 4 )
-	{
-		pTkip->L ^= pTkip->M;
-		pTkip->R ^= ROL32( pTkip->L, 17 );
-		pTkip->L += pTkip->R;
-		pTkip->R ^= ((pTkip->L & 0xff00ff00) >> 8) | ((pTkip->L & 0x00ff00ff) << 8);
-		pTkip->L += pTkip->R;
-		pTkip->R ^= ROL32( pTkip->L, 3 );
-		pTkip->L += pTkip->R;
-		pTkip->R ^= ROR32( pTkip->L, 2 );
-		pTkip->L += pTkip->R;
-		// Clear the buffer
-		pTkip->M = 0;
-		pTkip->nBytesInM = 0;
-	}
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Calculate the MIC Value.
-
-	Arguments:
-      pAd		Pointer to our adapter
-      pSrc			Pointer to source data for Calculate MIC Value
-      Len			Indicate the length of the source data
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPTkipAppend(
-	IN	PTKIP_KEY_INFO	pTkip,
-	IN	PUCHAR			pSrc,
-	IN	UINT			nBytes)
-{
-	// This is simple
-	while(nBytes > 0)
-	{
-		RTMPTkipAppendByte(pTkip, *pSrc++);
-		nBytes--;
-	}
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Get the MIC Value.
-
-	Arguments:
-      pAd		Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-		the MIC Value is store in pAd->PrivateInfo.MIC
-	========================================================================
-*/
-VOID	RTMPTkipGetMIC(
-	IN	PTKIP_KEY_INFO	pTkip)
-{
-	// Append the minimum padding
-	RTMPTkipAppendByte(pTkip, 0x5a );
-	RTMPTkipAppendByte(pTkip, 0 );
-	RTMPTkipAppendByte(pTkip, 0 );
-	RTMPTkipAppendByte(pTkip, 0 );
-	RTMPTkipAppendByte(pTkip, 0 );
-	// and then zeroes until the length is a multiple of 4
-	while( pTkip->nBytesInM != 0 )
-	{
-		RTMPTkipAppendByte(pTkip, 0 );
-	}
-	// The appendByte function has already computed the result.
-	RTMPTkipPutUInt32(pTkip->MIC, pTkip->L);
-	RTMPTkipPutUInt32(pTkip->MIC + 4, pTkip->R);
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Init Tkip function.
-
-	Arguments:
-      pAd		Pointer to our adapter
-		pTKey       Pointer to the Temporal Key (TK), TK shall be 128bits.
-		KeyId		TK Key ID
-		pTA			Pointer to transmitter address
-		pMICKey		pointer to MIC Key
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPInitTkipEngine(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pKey,
-	IN	UCHAR			KeyId,
-	IN	PUCHAR			pTA,
-	IN	PUCHAR			pMICKey,
-	IN	PUCHAR			pTSC,
-	OUT	PULONG			pIV16,
-	OUT	PULONG			pIV32)
-{
-	TKIP_IV	tkipIv;
-
-	// Prepare 8 bytes TKIP encapsulation for MPDU
-	NdisZeroMemory(&tkipIv, sizeof(TKIP_IV));
-	tkipIv.IV16.field.rc0 = *(pTSC + 1);
-	tkipIv.IV16.field.rc1 = (tkipIv.IV16.field.rc0 | 0x20) & 0x7f;
-	tkipIv.IV16.field.rc2 = *pTSC;
-	tkipIv.IV16.field.CONTROL.field.ExtIV = 1;  // 0: non-extended IV, 1: an extended IV
-	tkipIv.IV16.field.CONTROL.field.KeyID = KeyId;
-//	tkipIv.IV32 = *(PULONG)(pTSC + 2);
-	NdisMoveMemory(&tkipIv.IV32, (pTSC + 2), 4);   // Copy IV
-
-	*pIV16 = tkipIv.IV16.word;
-	*pIV32 = tkipIv.IV32;
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Init MIC Value calculation function which include set MIC key &
-		calculate first 16 bytes (DA + SA + priority +  0)
-
-	Arguments:
-      pAd		Pointer to our adapter
-		pTKey       Pointer to the Temporal Key (TK), TK shall be 128bits.
-		pDA			Pointer to DA address
-		pSA			Pointer to SA address
-		pMICKey		pointer to MIC Key
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPInitMICEngine(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pKey,
-	IN	PUCHAR			pDA,
-	IN	PUCHAR			pSA,
-	IN  UCHAR           UserPriority,
-	IN	PUCHAR			pMICKey)
-{
-	ULONG Priority = UserPriority;
-
-	// Init MIC value calculation
-	RTMPTkipSetMICKey(&pAd->PrivateInfo.Tx, pMICKey);
-	// DA
-	RTMPTkipAppend(&pAd->PrivateInfo.Tx, pDA, MAC_ADDR_LEN);
-	// SA
-	RTMPTkipAppend(&pAd->PrivateInfo.Tx, pSA, MAC_ADDR_LEN);
-	// Priority + 3 bytes of 0
-	RTMPTkipAppend(&pAd->PrivateInfo.Tx, (PUCHAR)&Priority, 4);
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Compare MIC value of received MSDU
-
-	Arguments:
-		pAd	Pointer to our adapter
-		pSrc        Pointer to the received Plain text data
-		pDA			Pointer to DA address
-		pSA			Pointer to SA address
-		pMICKey		pointer to MIC Key
-		Len         the length of the received plain text data exclude MIC value
-
-	Return Value:
-		TRUE        MIC value matched
-		FALSE       MIC value mismatched
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-BOOLEAN	RTMPTkipCompareMICValue(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pSrc,
-	IN	PUCHAR			pDA,
-	IN	PUCHAR			pSA,
-	IN	PUCHAR			pMICKey,
-	IN	UCHAR			UserPriority,
-	IN	UINT			Len)
-{
-	UCHAR	OldMic[8];
-	ULONG	Priority = UserPriority;
-
-	// Init MIC value calculation
-	RTMPTkipSetMICKey(&pAd->PrivateInfo.Rx, pMICKey);
-	// DA
-	RTMPTkipAppend(&pAd->PrivateInfo.Rx, pDA, MAC_ADDR_LEN);
-	// SA
-	RTMPTkipAppend(&pAd->PrivateInfo.Rx, pSA, MAC_ADDR_LEN);
-	// Priority + 3 bytes of 0
-	RTMPTkipAppend(&pAd->PrivateInfo.Rx, (PUCHAR)&Priority, 4);
-
-	// Calculate MIC value from plain text data
-	RTMPTkipAppend(&pAd->PrivateInfo.Rx, pSrc, Len);
-
-	// Get MIC valude from received frame
-	NdisMoveMemory(OldMic, pSrc + Len, 8);
-
-	// Get MIC value from decrypted plain data
-	RTMPTkipGetMIC(&pAd->PrivateInfo.Rx);
-
-	// Move MIC value from MSDU, this steps should move to data path.
-	// Since the MIC value might cross MPDUs.
-	if(!NdisEqualMemory(pAd->PrivateInfo.Rx.MIC, OldMic, 8))
-	{
-		DBGPRINT_RAW(RT_DEBUG_ERROR, ("RTMPTkipCompareMICValue(): TKIP MIC Error !\n"));  //MIC error.
-
-
-		return (FALSE);
-	}
-	return (TRUE);
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Compare MIC value of received MSDU
-
-	Arguments:
-		pAd	Pointer to our adapter
-		pLLC		LLC header
-		pSrc        Pointer to the received Plain text data
-		pDA			Pointer to DA address
-		pSA			Pointer to SA address
-		pMICKey		pointer to MIC Key
-		Len         the length of the received plain text data exclude MIC value
-
-	Return Value:
-		TRUE        MIC value matched
-		FALSE       MIC value mismatched
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-BOOLEAN	RTMPTkipCompareMICValueWithLLC(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pLLC,
-	IN	PUCHAR			pSrc,
-	IN	PUCHAR			pDA,
-	IN	PUCHAR			pSA,
-	IN	PUCHAR			pMICKey,
-	IN	UINT			Len)
-{
-	UCHAR	OldMic[8];
-	ULONG	Priority = 0;
-
-	// Init MIC value calculation
-	RTMPTkipSetMICKey(&pAd->PrivateInfo.Rx, pMICKey);
-	// DA
-	RTMPTkipAppend(&pAd->PrivateInfo.Rx, pDA, MAC_ADDR_LEN);
-	// SA
-	RTMPTkipAppend(&pAd->PrivateInfo.Rx, pSA, MAC_ADDR_LEN);
-	// Priority + 3 bytes of 0
-	RTMPTkipAppend(&pAd->PrivateInfo.Rx, (PUCHAR)&Priority, 4);
-
-	// Start with LLC header
-	RTMPTkipAppend(&pAd->PrivateInfo.Rx, pLLC, 8);
-
-	// Calculate MIC value from plain text data
-	RTMPTkipAppend(&pAd->PrivateInfo.Rx, pSrc, Len);
-
-	// Get MIC valude from received frame
-	NdisMoveMemory(OldMic, pSrc + Len, 8);
-
-	// Get MIC value from decrypted plain data
-	RTMPTkipGetMIC(&pAd->PrivateInfo.Rx);
-
-	// Move MIC value from MSDU, this steps should move to data path.
-	// Since the MIC value might cross MPDUs.
-	if(!NdisEqualMemory(pAd->PrivateInfo.Rx.MIC, OldMic, 8))
-	{
-		DBGPRINT_RAW(RT_DEBUG_ERROR, ("RTMPTkipCompareMICValueWithLLC(): TKIP MIC Error !\n"));  //MIC error.
-
-
-		return (FALSE);
-	}
-	return (TRUE);
-}
-/*
-	========================================================================
-
-	Routine	Description:
-		Copy frame from waiting queue into relative ring buffer and set
-	appropriate ASIC register to kick hardware transmit function
-
-	Arguments:
-		pAd		Pointer	to our adapter
-		PNDIS_PACKET	Pointer to Ndis Packet for MIC calculation
-		pEncap			Pointer to LLC encap data
-		LenEncap		Total encap length, might be 0 which indicates no encap
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPCalculateMICValue(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket,
-	IN	PUCHAR			pEncap,
-	IN	PCIPHER_KEY		pKey,
-	IN	UCHAR			apidx)
-{
-	PACKET_INFO		PacketInfo;
-	PUCHAR			pSrcBufVA;
-	UINT			SrcBufLen;
-	PUCHAR			pSrc;
-    UCHAR           UserPriority;
-	UCHAR			vlan_offset = 0;
-
-	RTMP_QueryPacketInfo(pPacket, &PacketInfo, &pSrcBufVA, &SrcBufLen);
-
-	UserPriority = RTMP_GET_PACKET_UP(pPacket);
-	pSrc = pSrcBufVA;
-
-	// determine if this is a vlan packet
-	if (((*(pSrc + 12) << 8) + *(pSrc + 13)) == 0x8100)
-		vlan_offset = 4;
-
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-	{
-		RTMPInitMICEngine(
-			pAd,
-			pKey->Key,
-			pSrc,
-			pSrc + 6,
-			UserPriority,
-			pKey->TxMic);
-	}
-
-
-	if (pEncap != NULL)
-	{
-		// LLC encapsulation
-		RTMPTkipAppend(&pAd->PrivateInfo.Tx, pEncap, 6);
-		// Protocol Type
-		RTMPTkipAppend(&pAd->PrivateInfo.Tx, pSrc + 12 + vlan_offset, 2);
-	}
-	SrcBufLen -= (14 + vlan_offset);
-	pSrc += (14 + vlan_offset);
-	do
-	{
-		if (SrcBufLen > 0)
-		{
-			RTMPTkipAppend(&pAd->PrivateInfo.Tx, pSrc, SrcBufLen);
-		}
-
-		break;	// No need handle next packet
-
-	}	while (TRUE);		// End of copying payload
-
-	// Compute the final MIC Value
-	RTMPTkipGetMIC(&pAd->PrivateInfo.Tx);
-}
-
-
-/************************************************************/
-/* tkip_sbox()																*/
-/* Returns a 16 bit value from a 64K entry table. The Table */
-/* is synthesized from two 256 entry byte wide tables.		*/
-/************************************************************/
-
-UINT tkip_sbox(UINT index)
-{
-	UINT index_low;
-	UINT index_high;
-	UINT left, right;
-
-	index_low = (index % 256);
-	index_high = ((index >> 8) % 256);
-
-	left = Tkip_Sbox_Lower[index_low] + (Tkip_Sbox_Upper[index_low] * 256);
-	right = Tkip_Sbox_Upper[index_high] + (Tkip_Sbox_Lower[index_high] * 256);
-
-	return (left ^ right);
-}
-
-UINT rotr1(UINT a)
-{
-	unsigned int b;
-
-	if ((a & 0x01) == 0x01)
-	{
-		b = (a >> 1) | 0x8000;
-	}
-	else
-	{
-		b = (a >> 1) & 0x7fff;
-	}
-	b = b % 65536;
-	return b;
-}
-
-VOID RTMPTkipMixKey(
-	UCHAR *key,
-	UCHAR *ta,
-	ULONG pnl, /* Least significant 16 bits of PN */
-	ULONG pnh, /* Most significant 32 bits of PN */
-	UCHAR *rc4key,
-	UINT *p1k)
-{
-
-	UINT tsc0;
-	UINT tsc1;
-	UINT tsc2;
-
-	UINT ppk0;
-	UINT ppk1;
-	UINT ppk2;
-	UINT ppk3;
-	UINT ppk4;
-	UINT ppk5;
-
-	INT i;
-	INT j;
-
-	tsc0 = (unsigned int)((pnh >> 16) % 65536); /* msb */
-	tsc1 = (unsigned int)(pnh % 65536);
-	tsc2 = (unsigned int)(pnl % 65536); /* lsb */
-
-	/* Phase 1, step 1 */
-	p1k[0] = tsc1;
-	p1k[1] = tsc0;
-	p1k[2] = (UINT)(ta[0] + (ta[1]*256));
-	p1k[3] = (UINT)(ta[2] + (ta[3]*256));
-	p1k[4] = (UINT)(ta[4] + (ta[5]*256));
-
-	/* Phase 1, step 2 */
-	for (i=0; i<8; i++)
-	{
-		j = 2*(i & 1);
-		p1k[0] = (p1k[0] + tkip_sbox( (p1k[4] ^ ((256*key[1+j]) + key[j])) % 65536 )) % 65536;
-		p1k[1] = (p1k[1] + tkip_sbox( (p1k[0] ^ ((256*key[5+j]) + key[4+j])) % 65536 )) % 65536;
-		p1k[2] = (p1k[2] + tkip_sbox( (p1k[1] ^ ((256*key[9+j]) + key[8+j])) % 65536 )) % 65536;
-		p1k[3] = (p1k[3] + tkip_sbox( (p1k[2] ^ ((256*key[13+j]) + key[12+j])) % 65536 )) % 65536;
-		p1k[4] = (p1k[4] + tkip_sbox( (p1k[3] ^ (((256*key[1+j]) + key[j]))) % 65536 )) % 65536;
-		p1k[4] = (p1k[4] + i) % 65536;
-	}
-
-	/* Phase 2, Step 1 */
-	ppk0 = p1k[0];
-	ppk1 = p1k[1];
-	ppk2 = p1k[2];
-	ppk3 = p1k[3];
-	ppk4 = p1k[4];
-	ppk5 = (p1k[4] + tsc2) % 65536;
-
-	/* Phase2, Step 2 */
-	ppk0 = ppk0 + tkip_sbox( (ppk5 ^ ((256*key[1]) + key[0])) % 65536);
-	ppk1 = ppk1 + tkip_sbox( (ppk0 ^ ((256*key[3]) + key[2])) % 65536);
-	ppk2 = ppk2 + tkip_sbox( (ppk1 ^ ((256*key[5]) + key[4])) % 65536);
-	ppk3 = ppk3 + tkip_sbox( (ppk2 ^ ((256*key[7]) + key[6])) % 65536);
-	ppk4 = ppk4 + tkip_sbox( (ppk3 ^ ((256*key[9]) + key[8])) % 65536);
-	ppk5 = ppk5 + tkip_sbox( (ppk4 ^ ((256*key[11]) + key[10])) % 65536);
-
-	ppk0 = ppk0 + rotr1(ppk5 ^ ((256*key[13]) + key[12]));
-	ppk1 = ppk1 + rotr1(ppk0 ^ ((256*key[15]) + key[14]));
-	ppk2 = ppk2 + rotr1(ppk1);
-	ppk3 = ppk3 + rotr1(ppk2);
-	ppk4 = ppk4 + rotr1(ppk3);
-	ppk5 = ppk5 + rotr1(ppk4);
-
-	/* Phase 2, Step 3 */
-    /* Phase 2, Step 3 */
-
-	tsc0 = (unsigned int)((pnh >> 16) % 65536); /* msb */
-	tsc1 = (unsigned int)(pnh % 65536);
-	tsc2 = (unsigned int)(pnl % 65536); /* lsb */
-
-	rc4key[0] = (tsc2 >> 8) % 256;
-	rc4key[1] = (((tsc2 >> 8) % 256) | 0x20) & 0x7f;
-	rc4key[2] = tsc2 % 256;
-	rc4key[3] = ((ppk5 ^ ((256*key[1]) + key[0])) >> 1) % 256;
-
-	rc4key[4] = ppk0 % 256;
-	rc4key[5] = (ppk0 >> 8) % 256;
-
-	rc4key[6] = ppk1 % 256;
-	rc4key[7] = (ppk1 >> 8) % 256;
-
-	rc4key[8] = ppk2 % 256;
-	rc4key[9] = (ppk2 >> 8) % 256;
-
-	rc4key[10] = ppk3 % 256;
-	rc4key[11] = (ppk3 >> 8) % 256;
-
-	rc4key[12] = ppk4 % 256;
-	rc4key[13] = (ppk4 >> 8) % 256;
-
-	rc4key[14] = ppk5 % 256;
-	rc4key[15] = (ppk5 >> 8) % 256;
-}
-
-
-/************************************************/
-/* construct_mic_header1()                      */
-/* Builds the first MIC header block from       */
-/* header fields.                               */
-/************************************************/
-
-void construct_mic_header1(
-	unsigned char *mic_header1,
-	int header_length,
-	unsigned char *mpdu)
-{
-	mic_header1[0] = (unsigned char)((header_length - 2) / 256);
-	mic_header1[1] = (unsigned char)((header_length - 2) % 256);
-	mic_header1[2] = mpdu[0] & 0xcf;    /* Mute CF poll & CF ack bits */
-	mic_header1[3] = mpdu[1] & 0xc7;    /* Mute retry, more data and pwr mgt bits */
-	mic_header1[4] = mpdu[4];       /* A1 */
-	mic_header1[5] = mpdu[5];
-	mic_header1[6] = mpdu[6];
-	mic_header1[7] = mpdu[7];
-	mic_header1[8] = mpdu[8];
-	mic_header1[9] = mpdu[9];
-	mic_header1[10] = mpdu[10];     /* A2 */
-	mic_header1[11] = mpdu[11];
-	mic_header1[12] = mpdu[12];
-	mic_header1[13] = mpdu[13];
-	mic_header1[14] = mpdu[14];
-	mic_header1[15] = mpdu[15];
-}
-
-/************************************************/
-/* construct_mic_header2()                      */
-/* Builds the last MIC header block from        */
-/* header fields.                               */
-/************************************************/
-
-void construct_mic_header2(
-	unsigned char *mic_header2,
-	unsigned char *mpdu,
-	int a4_exists,
-	int qc_exists)
-{
-	int i;
-
-	for (i = 0; i<16; i++) mic_header2[i]=0x00;
-
-	mic_header2[0] = mpdu[16];    /* A3 */
-	mic_header2[1] = mpdu[17];
-	mic_header2[2] = mpdu[18];
-	mic_header2[3] = mpdu[19];
-	mic_header2[4] = mpdu[20];
-	mic_header2[5] = mpdu[21];
-
-	// In Sequence Control field, mute sequence numer bits (12-bit)
-	mic_header2[6] = mpdu[22] & 0x0f;   /* SC */
-	mic_header2[7] = 0x00; /* mpdu[23]; */
-
-	if ((!qc_exists) & a4_exists)
-	{
-		for (i=0;i<6;i++) mic_header2[8+i] = mpdu[24+i];   /* A4 */
-
-	}
-
-	if (qc_exists && (!a4_exists))
-	{
-		mic_header2[8] = mpdu[24] & 0x0f; /* mute bits 15 - 4 */
-		mic_header2[9] = mpdu[25] & 0x00;
-	}
-
-	if (qc_exists && a4_exists)
-	{
-		for (i=0;i<6;i++) mic_header2[8+i] = mpdu[24+i];   /* A4 */
-
-		mic_header2[14] = mpdu[30] & 0x0f;
-		mic_header2[15] = mpdu[31] & 0x00;
-	}
-}
-
-
-/************************************************/
-/* construct_mic_iv()                           */
-/* Builds the MIC IV from header fields and PN  */
-/************************************************/
-
-void construct_mic_iv(
-	unsigned char *mic_iv,
-	int qc_exists,
-	int a4_exists,
-	unsigned char *mpdu,
-	unsigned int payload_length,
-	unsigned char *pn_vector)
-{
-	int i;
-
-	mic_iv[0] = 0x59;
-	if (qc_exists && a4_exists)
-		mic_iv[1] = mpdu[30] & 0x0f;    /* QoS_TC           */
-	if (qc_exists && !a4_exists)
-		mic_iv[1] = mpdu[24] & 0x0f;   /* mute bits 7-4    */
-	if (!qc_exists)
-		mic_iv[1] = 0x00;
-	for (i = 2; i < 8; i++)
-		mic_iv[i] = mpdu[i + 8];                    /* mic_iv[2:7] = A2[0:5] = mpdu[10:15] */
-#ifdef CONSISTENT_PN_ORDER
-		for (i = 8; i < 14; i++)
-			mic_iv[i] = pn_vector[i - 8];           /* mic_iv[8:13] = PN[0:5] */
-#else
-		for (i = 8; i < 14; i++)
-			mic_iv[i] = pn_vector[13 - i];          /* mic_iv[8:13] = PN[5:0] */
-#endif
-	i = (payload_length / 256);
-	i = (payload_length % 256);
-	mic_iv[14] = (unsigned char) (payload_length / 256);
-	mic_iv[15] = (unsigned char) (payload_length % 256);
-
-}
-
-
-
-/************************************/
-/* bitwise_xor()                    */
-/* A 128 bit, bitwise exclusive or  */
-/************************************/
-
-void bitwise_xor(unsigned char *ina, unsigned char *inb, unsigned char *out)
-{
-	int i;
-	for (i=0; i<16; i++)
-	{
-		out[i] = ina[i] ^ inb[i];
-	}
-}
-
-
-void aes128k128d(unsigned char *key, unsigned char *data, unsigned char *ciphertext)
-{
-	int round;
-	int i;
-	unsigned char intermediatea[16];
-	unsigned char intermediateb[16];
-	unsigned char round_key[16];
-
-	for(i=0; i<16; i++) round_key[i] = key[i];
-
-	for (round = 0; round < 11; round++)
-	{
-		if (round == 0)
-		{
-			xor_128(round_key, data, ciphertext);
-			next_key(round_key, round);
-		}
-		else if (round == 10)
-		{
-			byte_sub(ciphertext, intermediatea);
-			shift_row(intermediatea, intermediateb);
-			xor_128(intermediateb, round_key, ciphertext);
-		}
-		else    /* 1 - 9 */
-		{
-			byte_sub(ciphertext, intermediatea);
-			shift_row(intermediatea, intermediateb);
-			mix_column(&intermediateb[0], &intermediatea[0]);
-			mix_column(&intermediateb[4], &intermediatea[4]);
-			mix_column(&intermediateb[8], &intermediatea[8]);
-			mix_column(&intermediateb[12], &intermediatea[12]);
-			xor_128(intermediatea, round_key, ciphertext);
-			next_key(round_key, round);
-		}
-	}
-
-}
-
-void construct_ctr_preload(
-	unsigned char *ctr_preload,
-	int a4_exists,
-	int qc_exists,
-	unsigned char *mpdu,
-	unsigned char *pn_vector,
-	int c)
-{
-
-	int i = 0;
-	for (i=0; i<16; i++) ctr_preload[i] = 0x00;
-	i = 0;
-
-	ctr_preload[0] = 0x01;                                  /* flag */
-	if (qc_exists && a4_exists) ctr_preload[1] = mpdu[30] & 0x0f;   /* QoC_Control  */
-	if (qc_exists && !a4_exists) ctr_preload[1] = mpdu[24] & 0x0f;
-
-	for (i = 2; i < 8; i++)
-		ctr_preload[i] = mpdu[i + 8];                       /* ctr_preload[2:7] = A2[0:5] = mpdu[10:15] */
-#ifdef CONSISTENT_PN_ORDER
-	  for (i = 8; i < 14; i++)
-			ctr_preload[i] =    pn_vector[i - 8];           /* ctr_preload[8:13] = PN[0:5] */
-#else
-	  for (i = 8; i < 14; i++)
-			ctr_preload[i] =    pn_vector[13 - i];          /* ctr_preload[8:13] = PN[5:0] */
-#endif
-	ctr_preload[14] =  (unsigned char) (c / 256); // Ctr
-	ctr_preload[15] =  (unsigned char) (c % 256);
-
-}
-
-
-//
-// TRUE: Success!
-// FALSE: Decrypt Error!
-//
-BOOLEAN RTMPSoftDecryptTKIP(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR	pData,
-	IN ULONG	DataByteCnt,
-	IN UCHAR    UserPriority,
-	IN PCIPHER_KEY	pWpaKey)
-{
-	UCHAR			KeyID;
-	UINT			HeaderLen;
-    UCHAR			fc0;
-	UCHAR			fc1;
-	USHORT			fc;
-	UINT			frame_type;
-	UINT			frame_subtype;
-    UINT			from_ds;
-    UINT			to_ds;
-	INT				a4_exists;
-	INT				qc_exists;
-	USHORT			duration;
-	USHORT			seq_control;
-	USHORT			qos_control;
-	UCHAR			TA[MAC_ADDR_LEN];
-	UCHAR			DA[MAC_ADDR_LEN];
-	UCHAR			SA[MAC_ADDR_LEN];
-	UCHAR			RC4Key[16];
-	UINT			p1k[5]; //for mix_key;
-	ULONG			pnl;/* Least significant 16 bits of PN */
-	ULONG			pnh;/* Most significant 32 bits of PN */
-	UINT			num_blocks;
-	UINT			payload_remainder;
-	ARCFOURCONTEXT 	ArcFourContext;
-	UINT			crc32 = 0;
-	UINT			trailfcs = 0;
-	UCHAR			MIC[8];
-	UCHAR			TrailMIC[8];
-
-#ifdef RT_BIG_ENDIAN
-	RTMPFrameEndianChange(pAd, (PUCHAR)pData, DIR_READ, FALSE);
-#endif
-
-	fc0 = *pData;
-	fc1 = *(pData + 1);
-
-	fc = *((PUSHORT)pData);
-
-	frame_type = ((fc0 >> 2) & 0x03);
-	frame_subtype = ((fc0 >> 4) & 0x0f);
-
-    from_ds = (fc1 & 0x2) >> 1;
-    to_ds = (fc1 & 0x1);
-
-    a4_exists = (from_ds & to_ds);
-    qc_exists = ((frame_subtype == 0x08) ||    /* Assumed QoS subtypes */
-                  (frame_subtype == 0x09) ||   /* Likely to change.    */
-                  (frame_subtype == 0x0a) ||
-                  (frame_subtype == 0x0b)
-                 );
-
-	HeaderLen = 24;
-	if (a4_exists)
-		HeaderLen += 6;
-
-	KeyID = *((PUCHAR)(pData+ HeaderLen + 3));
-	KeyID = KeyID >> 6;
-
-	if (pWpaKey[KeyID].KeyLen == 0)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("RTMPSoftDecryptTKIP failed!(KeyID[%d] Length can not be 0)\n", KeyID));
-		return FALSE;
-	}
-
-	duration = *((PUSHORT)(pData+2));
-
-	seq_control = *((PUSHORT)(pData+22));
-
-	if (qc_exists)
-	{
-		if (a4_exists)
-		{
-			qos_control = *((PUSHORT)(pData+30));
-		}
-		else
-		{
-			qos_control = *((PUSHORT)(pData+24));
-		}
-	}
-
-	if (to_ds == 0 && from_ds == 1)
-	{
-		NdisMoveMemory(DA, pData+4, MAC_ADDR_LEN);
-		NdisMoveMemory(SA, pData+16, MAC_ADDR_LEN);
-		NdisMoveMemory(TA, pData+10, MAC_ADDR_LEN);  //BSSID
-	}
-	else if (to_ds == 0 && from_ds == 0 )
-	{
-		NdisMoveMemory(TA, pData+10, MAC_ADDR_LEN);
-		NdisMoveMemory(DA, pData+4, MAC_ADDR_LEN);
-		NdisMoveMemory(SA, pData+10, MAC_ADDR_LEN);
-	}
-	else if (to_ds == 1 && from_ds == 0)
-	{
-		NdisMoveMemory(SA, pData+10, MAC_ADDR_LEN);
-		NdisMoveMemory(TA, pData+10, MAC_ADDR_LEN);
-		NdisMoveMemory(DA, pData+16, MAC_ADDR_LEN);
-	}
-	else if (to_ds == 1 && from_ds == 1)
-	{
-		NdisMoveMemory(TA, pData+10, MAC_ADDR_LEN);
-		NdisMoveMemory(DA, pData+16, MAC_ADDR_LEN);
-		NdisMoveMemory(SA, pData+22, MAC_ADDR_LEN);
-	}
-
-	num_blocks = (DataByteCnt - 16) / 16;
-	payload_remainder = (DataByteCnt - 16) % 16;
-
-	pnl = (*(pData + HeaderLen)) * 256 + *(pData + HeaderLen + 2);
-	pnh = *((PULONG)(pData + HeaderLen + 4));
-	pnh = cpu2le32(pnh);
-	RTMPTkipMixKey(pWpaKey[KeyID].Key, TA, pnl, pnh, RC4Key, p1k);
-
-	ARCFOUR_INIT(&ArcFourContext, RC4Key, 16);
-
-	ARCFOUR_DECRYPT(&ArcFourContext, pData + HeaderLen, pData + HeaderLen + 8, DataByteCnt - HeaderLen - 8);
-	NdisMoveMemory(&trailfcs, pData + DataByteCnt - 8 - 4, 4);
-	crc32 = RTMP_CALC_FCS32(PPPINITFCS32, pData + HeaderLen, DataByteCnt - HeaderLen - 8 - 4);  //Skip IV+EIV 8 bytes & Skip last 4 bytes(FCS).
-	crc32 ^= 0xffffffff;             /* complement */
-
-    if(crc32 != cpu2le32(trailfcs))
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("RTMPSoftDecryptTKIP, WEP Data ICV Error !\n"));	 //ICV error.
-
-		return (FALSE);
-	}
-
-	NdisMoveMemory(TrailMIC, pData + DataByteCnt - 8 - 8 - 4, 8);
-	RTMPInitMICEngine(pAd, pWpaKey[KeyID].Key, DA, SA, UserPriority, pWpaKey[KeyID].RxMic);
-	RTMPTkipAppend(&pAd->PrivateInfo.Tx, pData + HeaderLen, DataByteCnt - HeaderLen - 8 - 12);
-	RTMPTkipGetMIC(&pAd->PrivateInfo.Tx);
-	NdisMoveMemory(MIC, pAd->PrivateInfo.Tx.MIC, 8);
-
-	if (!NdisEqualMemory(MIC, TrailMIC, 8))
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("RTMPSoftDecryptTKIP, WEP Data MIC Error !\n"));	 //MIC error.
-		//RTMPReportMicError(pAd, &pWpaKey[KeyID]);	// marked by AlbertY @ 20060630
-		return (FALSE);
-	}
-
-#ifdef RT_BIG_ENDIAN
-	RTMPFrameEndianChange(pAd, (PUCHAR)pData, DIR_READ, FALSE);
-#endif
-	//DBGPRINT(RT_DEBUG_TRACE, "RTMPSoftDecryptTKIP Decript done!!\n");
-	return TRUE;
-}
-
-
-
-
-BOOLEAN RTMPSoftDecryptAES(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR	pData,
-	IN ULONG	DataByteCnt,
-	IN PCIPHER_KEY	pWpaKey)
-{
-	UCHAR			KeyID;
-	UINT			HeaderLen;
-	UCHAR			PN[6];
-	UINT			payload_len;
-	UINT			num_blocks;
-	UINT			payload_remainder;
-	USHORT			fc;
-	UCHAR			fc0;
-	UCHAR			fc1;
-	UINT			frame_type;
-	UINT			frame_subtype;
-	UINT			from_ds;
-	UINT			to_ds;
-	INT				a4_exists;
-	INT				qc_exists;
-	UCHAR			aes_out[16];
-	int 			payload_index;
-	UINT 			i;
-	UCHAR 			ctr_preload[16];
-	UCHAR 			chain_buffer[16];
-	UCHAR 			padded_buffer[16];
-	UCHAR 			mic_iv[16];
-	UCHAR 			mic_header1[16];
-	UCHAR 			mic_header2[16];
-	UCHAR			MIC[8];
-	UCHAR			TrailMIC[8];
-
-#ifdef RT_BIG_ENDIAN
-	RTMPFrameEndianChange(pAd, (PUCHAR)pData, DIR_READ, FALSE);
-#endif
-
-	fc0 = *pData;
-	fc1 = *(pData + 1);
-
-	fc = *((PUSHORT)pData);
-
-	frame_type = ((fc0 >> 2) & 0x03);
-	frame_subtype = ((fc0 >> 4) & 0x0f);
-
-	from_ds = (fc1 & 0x2) >> 1;
-	to_ds = (fc1 & 0x1);
-
-	a4_exists = (from_ds & to_ds);
-	qc_exists = ((frame_subtype == 0x08) ||    /* Assumed QoS subtypes */
-				  (frame_subtype == 0x09) ||   /* Likely to change.    */
-				  (frame_subtype == 0x0a) ||
-				  (frame_subtype == 0x0b)
-				 );
-
-	HeaderLen = 24;
-	if (a4_exists)
-		HeaderLen += 6;
-
-	KeyID = *((PUCHAR)(pData+ HeaderLen + 3));
-	KeyID = KeyID >> 6;
-
-	if (pWpaKey[KeyID].KeyLen == 0)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("RTMPSoftDecryptAES failed!(KeyID[%d] Length can not be 0)\n", KeyID));
-		return FALSE;
-	}
-
-	PN[0] = *(pData+ HeaderLen);
-	PN[1] = *(pData+ HeaderLen + 1);
-	PN[2] = *(pData+ HeaderLen + 4);
-	PN[3] = *(pData+ HeaderLen + 5);
-	PN[4] = *(pData+ HeaderLen + 6);
-	PN[5] = *(pData+ HeaderLen + 7);
-
-	payload_len = DataByteCnt - HeaderLen - 8 - 8;	// 8 bytes for CCMP header , 8 bytes for MIC
-	payload_remainder = (payload_len) % 16;
-	num_blocks = (payload_len) / 16;
-
-
-
-	// Find start of payload
-	payload_index = HeaderLen + 8; //IV+EIV
-
-	for (i=0; i< num_blocks; i++)
-	{
-		construct_ctr_preload(ctr_preload,
-								a4_exists,
-								qc_exists,
-								pData,
-								PN,
-								i+1 );
-
-		aes128k128d(pWpaKey[KeyID].Key, ctr_preload, aes_out);
-
-		bitwise_xor(aes_out, pData + payload_index, chain_buffer);
-		NdisMoveMemory(pData + payload_index - 8, chain_buffer, 16);
-		payload_index += 16;
-	}
-
-	//
-	// If there is a short final block, then pad it
-	// encrypt it and copy the unpadded part back
-	//
-	if (payload_remainder > 0)
-	{
-		construct_ctr_preload(ctr_preload,
-								a4_exists,
-								qc_exists,
-								pData,
-								PN,
-								num_blocks + 1);
-
-		NdisZeroMemory(padded_buffer, 16);
-		NdisMoveMemory(padded_buffer, pData + payload_index, payload_remainder);
-
-		aes128k128d(pWpaKey[KeyID].Key, ctr_preload, aes_out);
-
-		bitwise_xor(aes_out, padded_buffer, chain_buffer);
-		NdisMoveMemory(pData + payload_index - 8, chain_buffer, payload_remainder);
-		payload_index += payload_remainder;
-	}
-
-	//
-	// Descrypt the MIC
-	//
-	construct_ctr_preload(ctr_preload,
-							a4_exists,
-							qc_exists,
-							pData,
-							PN,
-							0);
-	NdisZeroMemory(padded_buffer, 16);
-	NdisMoveMemory(padded_buffer, pData + payload_index, 8);
-
-	aes128k128d(pWpaKey[KeyID].Key, ctr_preload, aes_out);
-
-	bitwise_xor(aes_out, padded_buffer, chain_buffer);
-
-	NdisMoveMemory(TrailMIC, chain_buffer, 8);
-
-	//
-	// Calculate MIC
-	//
-
-	//Force the protected frame bit on
-	*(pData + 1) = *(pData + 1) | 0x40;
-
-	// Find start of payload
-	// Because the CCMP header has been removed
-	payload_index = HeaderLen;
-
-	construct_mic_iv(
-					mic_iv,
-					qc_exists,
-					a4_exists,
-					pData,
-					payload_len,
-					PN);
-
-	construct_mic_header1(
-						mic_header1,
-						HeaderLen,
-						pData);
-
-	construct_mic_header2(
-						mic_header2,
-						pData,
-						a4_exists,
-						qc_exists);
-
-	aes128k128d(pWpaKey[KeyID].Key, mic_iv, aes_out);
-	bitwise_xor(aes_out, mic_header1, chain_buffer);
-	aes128k128d(pWpaKey[KeyID].Key, chain_buffer, aes_out);
-	bitwise_xor(aes_out, mic_header2, chain_buffer);
-	aes128k128d(pWpaKey[KeyID].Key, chain_buffer, aes_out);
-
-	// iterate through each 16 byte payload block
-	for (i = 0; i < num_blocks; i++)
-	{
-		bitwise_xor(aes_out, pData + payload_index, chain_buffer);
-		payload_index += 16;
-		aes128k128d(pWpaKey[KeyID].Key, chain_buffer, aes_out);
-	}
-
-	// Add on the final payload block if it needs padding
-	if (payload_remainder > 0)
-	{
-		NdisZeroMemory(padded_buffer, 16);
-		NdisMoveMemory(padded_buffer, pData + payload_index, payload_remainder);
-
-		bitwise_xor(aes_out, padded_buffer, chain_buffer);
-		aes128k128d(pWpaKey[KeyID].Key, chain_buffer, aes_out);
-	}
-
-	// aes_out contains padded mic, discard most significant
-	// 8 bytes to generate 64 bit MIC
-	for (i = 0 ; i < 8; i++) MIC[i] = aes_out[i];
-
-	if (!NdisEqualMemory(MIC, TrailMIC, 8))
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("RTMPSoftDecryptAES, MIC Error !\n"));	 //MIC error.
-		return FALSE;
-	}
-
-#ifdef RT_BIG_ENDIAN
-	RTMPFrameEndianChange(pAd, (PUCHAR)pData, DIR_READ, FALSE);
-#endif
-
-	return TRUE;
-}
-
-/****************************************/
-/* aes128k128d()                        */
-/* Performs a 128 bit AES encrypt with  */
-/* 128 bit data.                        */
-/****************************************/
-VOID xor_128(
-	IN  PUCHAR  a,
-	IN  PUCHAR  b,
-	OUT PUCHAR  out)
-{
-	INT i;
-
-	for (i=0;i<16; i++)
-	{
-		out[i] = a[i] ^ b[i];
-	}
-}
-
-VOID next_key(
-	IN  PUCHAR  key,
-	IN  INT     round)
-{
-	UCHAR       rcon;
-	UCHAR       sbox_key[4];
-	UCHAR       rcon_table[12] =
-	{
-		0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80,
-		0x1b, 0x36, 0x36, 0x36
-	};
-
-	sbox_key[0] = RTMPCkipSbox(key[13]);
-	sbox_key[1] = RTMPCkipSbox(key[14]);
-	sbox_key[2] = RTMPCkipSbox(key[15]);
-	sbox_key[3] = RTMPCkipSbox(key[12]);
-
-	rcon = rcon_table[round];
-
-	xor_32(&key[0], sbox_key, &key[0]);
-	key[0] = key[0] ^ rcon;
-
-	xor_32(&key[4], &key[0], &key[4]);
-	xor_32(&key[8], &key[4], &key[8]);
-	xor_32(&key[12], &key[8], &key[12]);
-}
-
-VOID xor_32(
-	IN  PUCHAR  a,
-	IN  PUCHAR  b,
-	OUT PUCHAR  out)
-{
-	INT i;
-
-	for (i=0;i<4; i++)
-	{
-		out[i] = a[i] ^ b[i];
-	}
-}
-
-VOID byte_sub(
-	IN  PUCHAR  in,
-	OUT PUCHAR  out)
-{
-	INT i;
-
-	for (i=0; i< 16; i++)
-	{
-		out[i] = RTMPCkipSbox(in[i]);
-	}
-}
-
-UCHAR RTMPCkipSbox(
-	IN  UCHAR   a)
-{
-	return SboxTable[(int)a];
-}
-
-VOID shift_row(
-	IN  PUCHAR  in,
-	OUT PUCHAR  out)
-{
-	out[0] =  in[0];
-	out[1] =  in[5];
-	out[2] =  in[10];
-	out[3] =  in[15];
-	out[4] =  in[4];
-	out[5] =  in[9];
-	out[6] =  in[14];
-	out[7] =  in[3];
-	out[8] =  in[8];
-	out[9] =  in[13];
-	out[10] = in[2];
-	out[11] = in[7];
-	out[12] = in[12];
-	out[13] = in[1];
-	out[14] = in[6];
-	out[15] = in[11];
-}
-
-VOID mix_column(
-	IN  PUCHAR  in,
-	OUT PUCHAR  out)
-{
-	INT         i;
-	UCHAR       add1b[4];
-	UCHAR       add1bf7[4];
-	UCHAR       rotl[4];
-	UCHAR       swap_halfs[4];
-	UCHAR       andf7[4];
-	UCHAR       rotr[4];
-	UCHAR       temp[4];
-	UCHAR       tempb[4];
-
-	for (i=0 ; i<4; i++)
-	{
-		if ((in[i] & 0x80)== 0x80)
-			add1b[i] = 0x1b;
-		else
-			add1b[i] = 0x00;
-	}
-
-	swap_halfs[0] = in[2];    /* Swap halfs */
-	swap_halfs[1] = in[3];
-	swap_halfs[2] = in[0];
-	swap_halfs[3] = in[1];
-
-	rotl[0] = in[3];        /* Rotate left 8 bits */
-	rotl[1] = in[0];
-	rotl[2] = in[1];
-	rotl[3] = in[2];
-
-	andf7[0] = in[0] & 0x7f;
-	andf7[1] = in[1] & 0x7f;
-	andf7[2] = in[2] & 0x7f;
-	andf7[3] = in[3] & 0x7f;
-
-	for (i = 3; i>0; i--)    /* logical shift left 1 bit */
-	{
-		andf7[i] = andf7[i] << 1;
-		if ((andf7[i-1] & 0x80) == 0x80)
-		{
-			andf7[i] = (andf7[i] | 0x01);
-		}
-	}
-	andf7[0] = andf7[0] << 1;
-	andf7[0] = andf7[0] & 0xfe;
-
-	xor_32(add1b, andf7, add1bf7);
-
-	xor_32(in, add1bf7, rotr);
-
-	temp[0] = rotr[0];         /* Rotate right 8 bits */
-	rotr[0] = rotr[1];
-	rotr[1] = rotr[2];
-	rotr[2] = rotr[3];
-	rotr[3] = temp[0];
-
-	xor_32(add1bf7, rotr, temp);
-	xor_32(swap_halfs, rotl,tempb);
-	xor_32(temp, tempb, out);
-}
-
+#include "../../rt2870/common/rtmp_tkip.c"
diff --git a/drivers/staging/rt3070/common/rtmp_wep.c b/drivers/staging/rt3070/common/rtmp_wep.c
index f5f0a3bb17e..71979856e11 100644
--- a/drivers/staging/rt3070/common/rtmp_wep.c
+++ b/drivers/staging/rt3070/common/rtmp_wep.c
@@ -1,508 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	rtmp_wep.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Paul Wu		10-28-02		Initial
-*/
-
-#include	"../rt_config.h"
-
-UINT FCSTAB_32[256] =
-{
-	0x00000000, 0x77073096, 0xee0e612c, 0x990951ba,
-	0x076dc419, 0x706af48f, 0xe963a535, 0x9e6495a3,
-	0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988,
-	0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91,
-	0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de,
-	0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
-	0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec,
-	0x14015c4f, 0x63066cd9, 0xfa0f3d63, 0x8d080df5,
-	0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172,
-	0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b,
-	0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940,
-	0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
-	0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116,
-	0x21b4f4b5, 0x56b3c423, 0xcfba9599, 0xb8bda50f,
-	0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
-	0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d,
-	0x76dc4190, 0x01db7106, 0x98d220bc, 0xefd5102a,
-	0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
-	0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818,
-	0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01,
-	0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e,
-	0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457,
-	0x65b0d9c6, 0x12b7e950, 0x8bbeb8ea, 0xfcb9887c,
-	0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
-	0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2,
-	0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb,
-	0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0,
-	0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9,
-	0x5005713c, 0x270241aa, 0xbe0b1010, 0xc90c2086,
-	0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
-	0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4,
-	0x59b33d17, 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad,
-	0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a,
-	0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683,
-	0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8,
-	0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
-	0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe,
-	0xf762575d, 0x806567cb, 0x196c3671, 0x6e6b06e7,
-	0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc,
-	0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5,
-	0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252,
-	0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
-	0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60,
-	0xdf60efc3, 0xa867df55, 0x316e8eef, 0x4669be79,
-	0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
-	0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f,
-	0xc5ba3bbe, 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04,
-	0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
-	0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a,
-	0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713,
-	0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38,
-	0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21,
-	0x86d3d2d4, 0xf1d4e242, 0x68ddb3f8, 0x1fda836e,
-	0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
-	0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c,
-	0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45,
-	0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2,
-	0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db,
-	0xaed16a4a, 0xd9d65adc, 0x40df0b66, 0x37d83bf0,
-	0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
-	0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6,
-	0xbad03605, 0xcdd70693, 0x54de5729, 0x23d967bf,
-	0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94,
-	0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d
-};
-
-/*
-UCHAR   WEPKEY[] = {
-		//IV
-		0x00, 0x11, 0x22,
-		//WEP KEY
-		0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xAA, 0xBB, 0xCC
-	};
- */
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Init WEP function.
-
-	Arguments:
-      pAd		Pointer to our adapter
-		pKey        Pointer to the WEP KEY
-		KeyId		   WEP Key ID
-		KeyLen      the length of WEP KEY
-		pDest       Pointer to the destination which Encryption data will store in.
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPInitWepEngine(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pKey,
-	IN	UCHAR			KeyId,
-	IN	UCHAR			KeyLen,
-	IN OUT	PUCHAR		pDest)
-{
-	UINT i;
-	UCHAR   WEPKEY[] = {
-		//IV
-		0x00, 0x11, 0x22,
-		//WEP KEY
-		0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xAA, 0xBB, 0xCC
-	};
-
-	pAd->PrivateInfo.FCSCRC32 = PPPINITFCS32;   //Init crc32.
-
-#ifdef CONFIG_STA_SUPPORT
-    if (pAd->StaCfg.bCkipOn && (pAd->StaCfg.CkipFlag & 0x10) && (pAd->OpMode == OPMODE_STA))
-    {
-        ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, pKey, KeyLen);  //INIT SBOX, KEYLEN+3(IV)
-        NdisMoveMemory(pDest, pKey, 3);  //Append Init Vector
-    }
-    else
-#endif // CONFIG_STA_SUPPORT //
-    {
-		NdisMoveMemory(WEPKEY + 3, pKey, KeyLen);
-
-        for(i = 0; i < 3; i++)
-			WEPKEY[i] = RandomByte(pAd);   //Call mlme RandomByte() function.
-		ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, WEPKEY, KeyLen + 3);  //INIT SBOX, KEYLEN+3(IV)
-
-		NdisMoveMemory(pDest, WEPKEY, 3);  //Append Init Vector
-    }
-	*(pDest+3) = (KeyId << 6);       //Append KEYID
-
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Encrypt transimitted data
-
-	Arguments:
-      pAd		Pointer to our adapter
-      pSrc        Pointer to the transimitted source data that will be encrypt
-      pDest       Pointer to the destination where entryption data will be store in.
-      Len			Indicate the length of the source data
-
-	Return Value:
-      None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPEncryptData(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pSrc,
-	IN	PUCHAR			pDest,
-	IN	UINT			Len)
-{
-	pAd->PrivateInfo.FCSCRC32 = RTMP_CALC_FCS32(pAd->PrivateInfo.FCSCRC32, pSrc, Len);
-	ARCFOUR_ENCRYPT(&pAd->PrivateInfo.WEPCONTEXT, pDest, pSrc, Len);
-}
-
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Decrypt received WEP data
-
-	Arguments:
-		pAdapter		Pointer to our adapter
-		pSrc        Pointer to the received data
-		Len         the length of the received data
-
-	Return Value:
-		TRUE        Decrypt WEP data success
-		FALSE       Decrypt WEP data failed
-
-	Note:
-
-	========================================================================
-*/
-BOOLEAN	RTMPSoftDecryptWEP(
-	IN PRTMP_ADAPTER 	pAd,
-	IN PUCHAR			pData,
-	IN ULONG			DataByteCnt,
-	IN PCIPHER_KEY		pGroupKey)
-{
-	UINT	trailfcs;
-	UINT    crc32;
-	UCHAR	KeyIdx;
-	UCHAR   WEPKEY[] = {
-		//IV
-		0x00, 0x11, 0x22,
-		//WEP KEY
-		0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xAA, 0xBB, 0xCC
-	};
-	UCHAR 	*pPayload = (UCHAR *)pData + LENGTH_802_11;
-	ULONG	payload_len = DataByteCnt - LENGTH_802_11;
-
-	NdisMoveMemory(WEPKEY, pPayload, 3);    //Get WEP IV
-
-	KeyIdx = (*(pPayload + 3) & 0xc0) >> 6;
-	if (pGroupKey[KeyIdx].KeyLen == 0)
-		return (FALSE);
-
-	NdisMoveMemory(WEPKEY + 3, pGroupKey[KeyIdx].Key, pGroupKey[KeyIdx].KeyLen);
-	ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, WEPKEY, pGroupKey[KeyIdx].KeyLen + 3);
-	ARCFOUR_DECRYPT(&pAd->PrivateInfo.WEPCONTEXT, pPayload, pPayload + 4, payload_len - 4);
-	NdisMoveMemory(&trailfcs, pPayload + payload_len - 8, 4);
-	crc32 = RTMP_CALC_FCS32(PPPINITFCS32, pPayload, payload_len - 8);  //Skip last 4 bytes(FCS).
-	crc32 ^= 0xffffffff;             /* complement */
-
-    if(crc32 != cpu2le32(trailfcs))
-    {
-		DBGPRINT(RT_DEBUG_TRACE, ("! WEP Data CRC Error !\n"));	 //CRC error.
-		return (FALSE);
-	}
-	return (TRUE);
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		The Stream Cipher Encryption Algorithm "ARCFOUR" initialize
-
-	Arguments:
-	   Ctx         Pointer to ARCFOUR CONTEXT (SBOX)
-		pKey        Pointer to the WEP KEY
-		KeyLen      Indicate the length fo the WEP KEY
-
-	Return Value:
-	   None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	ARCFOUR_INIT(
-	IN	PARCFOURCONTEXT	Ctx,
-	IN	PUCHAR			pKey,
-	IN	UINT			KeyLen)
-{
-	UCHAR	t, u;
-	UINT	keyindex;
-	UINT	stateindex;
-	PUCHAR	state;
-	UINT	counter;
-
-	state = Ctx->STATE;
-	Ctx->X = 0;
-	Ctx->Y = 0;
-	for (counter = 0; counter < 256; counter++)
-		state[counter] = (UCHAR)counter;
-	keyindex = 0;
-	stateindex = 0;
-	for (counter = 0; counter < 256; counter++)
-	{
-		t = state[counter];
-		stateindex = (stateindex + pKey[keyindex] + t) & 0xff;
-		u = state[stateindex];
-		state[stateindex] = t;
-		state[counter] = u;
-		if (++keyindex >= KeyLen)
-			keyindex = 0;
-	}
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Get bytes from ARCFOUR CONTEXT (S-BOX)
-
-	Arguments:
-	   Ctx         Pointer to ARCFOUR CONTEXT (SBOX)
-
-	Return Value:
-	   UCHAR  - the value of the ARCFOUR CONTEXT (S-BOX)
-
-	Note:
-
-	========================================================================
-*/
-UCHAR	ARCFOUR_BYTE(
-	IN	PARCFOURCONTEXT		Ctx)
-{
-  UINT x;
-  UINT y;
-  UCHAR sx, sy;
-  PUCHAR state;
-
-  state = Ctx->STATE;
-  x = (Ctx->X + 1) & 0xff;
-  sx = state[x];
-  y = (sx + Ctx->Y) & 0xff;
-  sy = state[y];
-  Ctx->X = x;
-  Ctx->Y = y;
-  state[y] = sx;
-  state[x] = sy;
-
-  return(state[(sx + sy) & 0xff]);
-
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		The Stream Cipher Decryption Algorithm
-
-	Arguments:
-		Ctx         Pointer to ARCFOUR CONTEXT (SBOX)
-		pDest			Pointer to the Destination
-		pSrc        Pointer to the Source data
-		Len         Indicate the length of the Source data
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	ARCFOUR_DECRYPT(
-	IN	PARCFOURCONTEXT	Ctx,
-	IN	PUCHAR			pDest,
-	IN	PUCHAR			pSrc,
-	IN	UINT			Len)
-{
-	UINT i;
-
-	for (i = 0; i < Len; i++)
-		pDest[i] = pSrc[i] ^ ARCFOUR_BYTE(Ctx);
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		The Stream Cipher Encryption Algorithm
-
-	Arguments:
-		Ctx         Pointer to ARCFOUR CONTEXT (SBOX)
-		pDest			Pointer to the Destination
-		pSrc        Pointer to the Source data
-		Len         Indicate the length of the Source dta
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	ARCFOUR_ENCRYPT(
-	IN	PARCFOURCONTEXT	Ctx,
-	IN	PUCHAR			pDest,
-	IN	PUCHAR			pSrc,
-	IN	UINT			Len)
-{
-	UINT i;
-
-	for (i = 0; i < Len; i++)
-		pDest[i] = pSrc[i] ^ ARCFOUR_BYTE(Ctx);
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		The Stream Cipher Encryption Algorithm which conform to the special requirement to encrypt  GTK.
-
-	Arguments:
-		Ctx         Pointer to ARCFOUR CONTEXT (SBOX)
-		pDest			Pointer to the Destination
-		pSrc        Pointer to the Source data
-		Len         Indicate the length of the Source dta
-
-
-	========================================================================
-*/
-
-VOID	WPAARCFOUR_ENCRYPT(
-	IN	PARCFOURCONTEXT	Ctx,
-	IN	PUCHAR			pDest,
-	IN	PUCHAR			pSrc,
-	IN	UINT			Len)
-{
-	UINT i;
-        //discard first 256 bytes
-	for (i = 0; i < 256; i++)
-            ARCFOUR_BYTE(Ctx);
-
-	for (i = 0; i < Len; i++)
-		pDest[i] = pSrc[i] ^ ARCFOUR_BYTE(Ctx);
-}
-
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Calculate a new FCS given the current FCS and the new data.
-
-	Arguments:
-		Fcs	      the original FCS value
-		Cp          pointer to the data which will be calculate the FCS
-		Len         the length of the data
-
-	Return Value:
-		UINT - FCS 32 bits
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-UINT	RTMP_CALC_FCS32(
-	IN	UINT	Fcs,
-	IN	PUCHAR	Cp,
-	IN	INT		Len)
-{
-	while (Len--)
-	   Fcs = (((Fcs) >> 8) ^ FCSTAB_32[((Fcs) ^ (*Cp++)) & 0xff]);
-
-	return (Fcs);
-}
-
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Get last FCS and encrypt it to the destination
-
-	Arguments:
-		pDest			Pointer to the Destination
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPSetICV(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR	pDest)
-{
-	pAd->PrivateInfo.FCSCRC32 ^= 0xffffffff;             /* complement */
-	pAd->PrivateInfo.FCSCRC32 = cpu2le32(pAd->PrivateInfo.FCSCRC32);
-
-	ARCFOUR_ENCRYPT(&pAd->PrivateInfo.WEPCONTEXT, pDest, (PUCHAR) &pAd->PrivateInfo.FCSCRC32, 4);
-}
-
+#include "../../rt2870/common/rtmp_wep.c"
diff --git a/drivers/staging/rt3070/common/rtusb_bulk.c b/drivers/staging/rt3070/common/rtusb_bulk.c
index 1a05703520f..762ecfe6044 100644
--- a/drivers/staging/rt3070/common/rtusb_bulk.c
+++ b/drivers/staging/rt3070/common/rtusb_bulk.c
@@ -1,1382 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	rtusb_bulk.c
-
-	Abstract:
-
-	Revision History:
-	Who			When		What
-	--------	----------	----------------------------------------------
-	Name		Date		Modification logs
-	Paul Lin	06-25-2004	created
-
-*/
-
-#include	"../rt_config.h"
-// Match total 6 bulkout endpoint to corresponding queue.
-UCHAR	EpToQueue[6]={FIFO_EDCA, FIFO_EDCA, FIFO_EDCA, FIFO_EDCA, FIFO_EDCA, FIFO_MGMT};
-
-//static BOOLEAN SingleBulkOut = FALSE;
-
-void RTUSB_FILL_BULK_URB (struct urb *pUrb,
-	struct usb_device *pUsb_Dev,
-	unsigned int bulkpipe,
-	void *pTransferBuf,
-	int BufSize,
-	usb_complete_t Complete,
-	void *pContext)
-{
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-	usb_fill_bulk_urb(pUrb, pUsb_Dev, bulkpipe, pTransferBuf, BufSize, (usb_complete_t)Complete, pContext);
-#else
-	FILL_BULK_URB(pUrb, pUsb_Dev, bulkpipe, pTransferBuf, BufSize, Complete, pContext);
-#endif
-
-}
-
-VOID	RTUSBInitTxDesc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PTX_CONTEXT		pTxContext,
-	IN	UCHAR			BulkOutPipeId,
-	IN	usb_complete_t	Func)
-{
-	PURB				pUrb;
-	PUCHAR				pSrc = NULL;
-	POS_COOKIE			pObj = (POS_COOKIE) pAd->OS_Cookie;
-
-	pUrb = pTxContext->pUrb;
-	ASSERT(pUrb);
-
-	// Store BulkOut PipeId
-	pTxContext->BulkOutPipeId = BulkOutPipeId;
-
-	if (pTxContext->bAggregatible)
-	{
-		pSrc = &pTxContext->TransferBuffer->Aggregation[2];
-	}
-	else
-	{
-		pSrc = (PUCHAR) pTxContext->TransferBuffer->field.WirelessPacket;
-	}
-
-
-	//Initialize a tx bulk urb
-	RTUSB_FILL_BULK_URB(pUrb,
-						pObj->pUsb_Dev,
-						usb_sndbulkpipe(pObj->pUsb_Dev, pAd->BulkOutEpAddr[BulkOutPipeId]),
-						pSrc,
-						pTxContext->BulkOutSize,
-						Func,
-						pTxContext);
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-	if (pTxContext->bAggregatible)
-		pUrb->transfer_dma	= (pTxContext->data_dma + TX_BUFFER_NORMSIZE + 2);
-	else
-		pUrb->transfer_dma	= pTxContext->data_dma;
-
-	pUrb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-#endif
-
-}
-
-VOID	RTUSBInitHTTxDesc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PHT_TX_CONTEXT	pTxContext,
-	IN	UCHAR			BulkOutPipeId,
-	IN	ULONG			BulkOutSize,
-	IN	usb_complete_t	Func)
-{
-	PURB				pUrb;
-	PUCHAR				pSrc = NULL;
-	POS_COOKIE			pObj = (POS_COOKIE) pAd->OS_Cookie;
-
-	pUrb = pTxContext->pUrb;
-	ASSERT(pUrb);
-
-	// Store BulkOut PipeId
-	pTxContext->BulkOutPipeId = BulkOutPipeId;
-
-	pSrc = &pTxContext->TransferBuffer->field.WirelessPacket[pTxContext->NextBulkOutPosition];
-
-
-	//Initialize a tx bulk urb
-	RTUSB_FILL_BULK_URB(pUrb,
-						pObj->pUsb_Dev,
-						usb_sndbulkpipe(pObj->pUsb_Dev, pAd->BulkOutEpAddr[BulkOutPipeId]),
-						pSrc,
-						BulkOutSize,
-						Func,
-						pTxContext);
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-	pUrb->transfer_dma	= (pTxContext->data_dma + pTxContext->NextBulkOutPosition);
-	pUrb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-#endif
-
-}
-
-VOID	RTUSBInitRxDesc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PRX_CONTEXT		pRxContext)
-{
-	PURB				pUrb;
-	POS_COOKIE			pObj = (POS_COOKIE) pAd->OS_Cookie;
-	ULONG				RX_bulk_size;
-
-
-	pUrb = pRxContext->pUrb;
-	ASSERT(pUrb);
-
-	if ( pAd->BulkInMaxPacketSize == 64)
-		RX_bulk_size = 4096;
-	else
-		RX_bulk_size = MAX_RXBULK_SIZE;
-
-	//Initialize a rx bulk urb
-	RTUSB_FILL_BULK_URB(pUrb,
-						pObj->pUsb_Dev,
-						usb_rcvbulkpipe(pObj->pUsb_Dev, pAd->BulkInEpAddr),
-						&(pRxContext->TransferBuffer[pAd->NextRxBulkInPosition]),
-						RX_bulk_size - (pAd->NextRxBulkInPosition),
-						(usb_complete_t)RTUSBBulkRxComplete,
-						(void *)pRxContext);
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-	pUrb->transfer_dma	= pRxContext->data_dma + pAd->NextRxBulkInPosition;
-	pUrb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-#endif
-
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-
-#define BULK_OUT_LOCK(pLock, IrqFlags)	\
-		if(1 /*!(in_interrupt() & 0xffff0000)*/)	\
-			RTMP_IRQ_LOCK((pLock), IrqFlags);
-
-#define BULK_OUT_UNLOCK(pLock, IrqFlags)	\
-		if(1 /*!(in_interrupt() & 0xffff0000)*/)	\
-			RTMP_IRQ_UNLOCK((pLock), IrqFlags);
-
-
-VOID	RTUSBBulkOutDataPacket(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			BulkOutPipeId,
-	IN	UCHAR			Index)
-{
-
-	PHT_TX_CONTEXT	pHTTXContext;
-	PURB			pUrb;
-	int				ret = 0;
-	PTXINFO_STRUC	pTxInfo, pLastTxInfo = NULL;
-	PTXWI_STRUC             pTxWI;
-	ULONG			TmpBulkEndPos, ThisBulkSize;
-	unsigned long	IrqFlags = 0, IrqFlags2 = 0;
-	PUCHAR			pWirelessPkt, pAppendant;
-	BOOLEAN			bTxQLastRound = FALSE;
-	UCHAR			allzero[4]= {0x0,0x0,0x0,0x0};
-
-	BULK_OUT_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-	if ((pAd->BulkOutPending[BulkOutPipeId] == TRUE) || RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NEED_STOP_TX))
-	{
-		BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-		return;
-	}
-	pAd->BulkOutPending[BulkOutPipeId] = TRUE;
-
-	if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
-		)
-	{
-		pAd->BulkOutPending[BulkOutPipeId] = FALSE;
-		BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-		return;
-	}
-	BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-
-
-	pHTTXContext = &(pAd->TxContext[BulkOutPipeId]);
-
-	BULK_OUT_LOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags2);
-	if ((pHTTXContext->ENextBulkOutPosition == pHTTXContext->CurWritePosition)
-		|| ((pHTTXContext->ENextBulkOutPosition-8) == pHTTXContext->CurWritePosition))
-	{
-		BULK_OUT_UNLOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags2);
-
-		BULK_OUT_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-		pAd->BulkOutPending[BulkOutPipeId] = FALSE;
-
-		// Clear Data flag
-		RTUSB_CLEAR_BULK_FLAG(pAd, (fRTUSB_BULK_OUT_DATA_FRAG << BulkOutPipeId));
-		RTUSB_CLEAR_BULK_FLAG(pAd, (fRTUSB_BULK_OUT_DATA_NORMAL << BulkOutPipeId));
-
-		BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-		return;
-	}
-
-	// Clear Data flag
-	RTUSB_CLEAR_BULK_FLAG(pAd, (fRTUSB_BULK_OUT_DATA_FRAG << BulkOutPipeId));
-	RTUSB_CLEAR_BULK_FLAG(pAd, (fRTUSB_BULK_OUT_DATA_NORMAL << BulkOutPipeId));
-
-	//DBGPRINT(RT_DEBUG_TRACE,("BulkOut-B:I=0x%lx, CWPos=%ld, CWRPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d!\n", in_interrupt(),
-	//							pHTTXContext->CurWritePosition, pHTTXContext->CurWriteRealPos, pHTTXContext->NextBulkOutPosition,
-	//							pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad));
-	pHTTXContext->NextBulkOutPosition = pHTTXContext->ENextBulkOutPosition;
-	ThisBulkSize = 0;
-	TmpBulkEndPos = pHTTXContext->NextBulkOutPosition;
-	pWirelessPkt = &pHTTXContext->TransferBuffer->field.WirelessPacket[0];
-
-	if ((pHTTXContext->bCopySavePad == TRUE))
-	{
-		if (RTMPEqualMemory(pHTTXContext->SavedPad, allzero,4))
-		{
-			DBGPRINT_RAW(RT_DEBUG_ERROR,("e1, allzero : %x  %x  %x  %x  %x  %x  %x  %x \n",
-				pHTTXContext->SavedPad[0], pHTTXContext->SavedPad[1], pHTTXContext->SavedPad[2],pHTTXContext->SavedPad[3]
-				,pHTTXContext->SavedPad[4], pHTTXContext->SavedPad[5], pHTTXContext->SavedPad[6],pHTTXContext->SavedPad[7]));
-		}
-		NdisMoveMemory(&pWirelessPkt[TmpBulkEndPos], pHTTXContext->SavedPad, 8);
-		pHTTXContext->bCopySavePad = FALSE;
-		if (pAd->bForcePrintTX == TRUE)
-			DBGPRINT(RT_DEBUG_TRACE,("RTUSBBulkOutDataPacket --> COPY PAD. CurWrite = %ld, NextBulk = %ld.   ENextBulk = %ld.\n",   pHTTXContext->CurWritePosition, pHTTXContext->NextBulkOutPosition, pHTTXContext->ENextBulkOutPosition));
-	}
-
-	do
-	{
-		pTxInfo = (PTXINFO_STRUC)&pWirelessPkt[TmpBulkEndPos];
-		pTxWI = (PTXWI_STRUC)&pWirelessPkt[TmpBulkEndPos + TXINFO_SIZE];
-
-		if (pAd->bForcePrintTX == TRUE)
-			DBGPRINT(RT_DEBUG_TRACE, ("RTUSBBulkOutDataPacket AMPDU = %d.\n",   pTxWI->AMPDU));
-
-		// add by Iverson, limit BulkOut size to 4k to pass WMM b mode 2T1R test items
-		//if ((ThisBulkSize != 0)  && (pTxWI->AMPDU == 0))
-		if ((ThisBulkSize != 0) && (pTxWI->PHYMODE == MODE_CCK))
-		{
-#ifdef INF_AMAZON_SE
-			/*Iverson Add for AMAZON USB (RT2070 &&  RT3070) to pass WMM A2-T4 ~ A2-T10*/
-			if(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED))
-			{
-				/*Iverson patch for WMM A5-T07 ,WirelessStaToWirelessSta do not bulk out aggregate*/
-				if(pTxWI->PacketId == 6)
-                {
-                	pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos;
-                	break;
-                }
-				else if (BulkOutPipeId == 1)
-				{
-					/*BK  No Limit BulkOut size .*/
-					pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos;
-					break;
-				}
-				else if (((ThisBulkSize&0xffff8000) != 0) || (((ThisBulkSize&0x1000) == 0x1000) &&  (BulkOutPipeId == 0)  ))
-				{
-					/*BE  Limit BulkOut size to about 4k bytes.*/
-					pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos;
-					break;
-				}
-				else if (((ThisBulkSize&0xffff8000) != 0) || (((ThisBulkSize&0x1c00) == 0x1c00) &&  (BulkOutPipeId == 2)  ))
-				{
-					/*VI Limit BulkOut size to about 7k bytes.*/
-					pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos;
-					break;
-				}
-				else if (((ThisBulkSize&0xffff8000) != 0) || (((ThisBulkSize&0x2500) == 0x2500) &&  (BulkOutPipeId == 3)  ))
-				{
-					/*VO Limit BulkOut size to about 9k bytes.*/
-					pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos;
-					break;
-				}
-			}
-			else if (((ThisBulkSize&0xffff8000) != 0) || ((ThisBulkSize&0x1000) == 0x1000))
-			{
-				/* Limit BulkOut size to about 4k bytes.*/
-				pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos;
-				break;
-			}
-#else
-			if (((ThisBulkSize&0xffff8000) != 0) || ((ThisBulkSize&0x1000) == 0x1000))
-			{
-				// Limit BulkOut size to about 4k bytes.
-				pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos;
-				break;
-			}
-#endif // INF_AMAZON_SE //
-
-			else if (((pAd->BulkOutMaxPacketSize < 512) && ((ThisBulkSize&0xfffff800) != 0) ) /*|| ( (ThisBulkSize != 0)  && (pTxWI->AMPDU == 0))*/)
-			{
-				// For USB 1.1 or peer which didn't support AMPDU, limit the BulkOut size.
-				// For performence in b/g mode, now just check for USB 1.1 and didn't care about the APMDU or not! 2008/06/04.
-				pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos;
-				break;
-			}
-		}
-		// end Iverson
-		else
-		{
-#ifdef INF_AMAZON_SE
-//#ifdef DOT11_N_SUPPORT
-//			if(((ThisBulkSize&0xffff8000) != 0) || ((ThisBulkSize&0x6000) == 0x6000) || ( (ThisBulkSize != 0)  && (pTxWI->AMPDU == 0)))
-//			{
-//				/* AMAZON_SE: BG mode Disable BulkOut Aggregate, N mode BulkOut Aggregaet size 24K */
-//				pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos;
-//               break;
-//			}
-//			else
-//#endif // DOT11_N_SUPPORT //
-//			{
-				if(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) && (pTxWI->AMPDU == 0))
-				{
-					if (((pAd->BulkOutMaxPacketSize < 512) && ((ThisBulkSize&0xfffff800) != 0)) ||
-						(ThisBulkSize != 0))
-					{
-						/* AMAZON_SE: RT2070  Disable BulkOut Aggregate when WMM for USB issue */
-						pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos;
-						break;
-					}
-				}
-/*
-				else if (((ThisBulkSize&0xffff8000) != 0) || ((ThisBulkSize&0x6000) == 0x6000))
-				{
-					// Limit BulkOut size to about 24k bytes.
-					pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos;
-					break;
-				}
-			}
-*/
-#endif // INF_AMAZON_SE //
-
-			if (((ThisBulkSize&0xffff8000) != 0) || ((ThisBulkSize&0x6000) == 0x6000))
-			{	// Limit BulkOut size to about 24k bytes.
-				pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos;
-				break;
-			}
-
-			else if (((pAd->BulkOutMaxPacketSize < 512) && ((ThisBulkSize&0xfffff800) != 0) ) /*|| ( (ThisBulkSize != 0)  && (pTxWI->AMPDU == 0))*/)
-			{	// For USB 1.1 or peer which didn't support AMPDU, limit the BulkOut size.
-				// For performence in b/g mode, now just check for USB 1.1 and didn't care about the APMDU or not! 2008/06/04.
-				pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos;
-				break;
-			}
-		}
-
-		if (TmpBulkEndPos == pHTTXContext->CurWritePosition)
-		{
-			pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos;
-			break;
-		}
-		//PS packets use HCCA queue when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA)
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-		if (pTxInfo->QSEL != FIFO_EDCA)
-		{
-			printk("%s(): ====> pTxInfo->QueueSel(%d)!= FIFO_EDCA!!!!\n", __FUNCTION__, pTxInfo->QSEL);
-			printk("\tCWPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d!\n", pHTTXContext->CurWritePosition, pHTTXContext->NextBulkOutPosition, pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad);
-			hex_dump("Wrong QSel Pkt:", (PUCHAR)&pWirelessPkt[TmpBulkEndPos], (pHTTXContext->CurWritePosition - pHTTXContext->NextBulkOutPosition));
-		}
-		}
-#endif // CONFIG_STA_SUPPORT //
-
-		if (pTxInfo->USBDMATxPktLen <= 8)
-		{
-			BULK_OUT_UNLOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags2);
-			DBGPRINT(RT_DEBUG_ERROR /*RT_DEBUG_TRACE*/,("e2, USBDMATxPktLen==0, Size=%ld, bCSPad=%d, CWPos=%ld, NBPos=%ld, CWRPos=%ld!\n",
-					pHTTXContext->BulkOutSize, pHTTXContext->bCopySavePad, pHTTXContext->CurWritePosition, pHTTXContext->NextBulkOutPosition, pHTTXContext->CurWriteRealPos));
-			{
-				DBGPRINT_RAW(RT_DEBUG_ERROR /*RT_DEBUG_TRACE*/,("%x  %x  %x  %x  %x  %x  %x  %x \n",
-					pHTTXContext->SavedPad[0], pHTTXContext->SavedPad[1], pHTTXContext->SavedPad[2],pHTTXContext->SavedPad[3]
-					,pHTTXContext->SavedPad[4], pHTTXContext->SavedPad[5], pHTTXContext->SavedPad[6],pHTTXContext->SavedPad[7]));
-			}
-			pAd->bForcePrintTX = TRUE;
-			BULK_OUT_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-			pAd->BulkOutPending[BulkOutPipeId] = FALSE;
-			BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-			//DBGPRINT(RT_DEBUG_LOUD,("Out:pTxInfo->USBDMATxPktLen=%d!\n", pTxInfo->USBDMATxPktLen));
-			return;
-		}
-
-			// Increase Total transmit byte counter
-		pAd->RalinkCounters.OneSecTransmittedByteCount +=  pTxWI->MPDUtotalByteCount;
-		pAd->RalinkCounters.TransmittedByteCount +=  pTxWI->MPDUtotalByteCount;
-
-		pLastTxInfo = pTxInfo;
-
-		// Make sure we use EDCA QUEUE.
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		pTxInfo->QSEL = FIFO_EDCA; //PS packets use HCCA queue when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA)
-#endif // CONFIG_STA_SUPPORT //
-		ThisBulkSize += (pTxInfo->USBDMATxPktLen+4);
-		TmpBulkEndPos += (pTxInfo->USBDMATxPktLen+4);
-
-		if (TmpBulkEndPos != pHTTXContext->CurWritePosition)
-			pTxInfo->USBDMANextVLD = 1;
-
-		if (pTxInfo->SwUseLastRound == 1)
-		{
-			if (pHTTXContext->CurWritePosition == 8)
-				pTxInfo->USBDMANextVLD = 0;
-			pTxInfo->SwUseLastRound = 0;
-
-			bTxQLastRound = TRUE;
-			pHTTXContext->ENextBulkOutPosition = 8;
-
-	#ifdef RT_BIG_ENDIAN
-			RTMPDescriptorEndianChange((PUCHAR)pTxInfo, TYPE_TXINFO);
-			RTMPWIEndianChange((PUCHAR)pTxWI, TYPE_TXWI);
-	#endif // RT_BIG_ENDIAN //
-
-			break;
-		}
-
-#ifdef RT_BIG_ENDIAN
-		RTMPDescriptorEndianChange((PUCHAR)pTxInfo, TYPE_TXINFO);
-		RTMPWIEndianChange((PUCHAR)pTxWI, TYPE_TXWI);
-#endif // RT_BIG_ENDIAN //
-
-	}while (TRUE);
-
-	// adjust the pTxInfo->USBDMANextVLD value of last pTxInfo.
-	if (pLastTxInfo)
-	{
-#ifdef RT_BIG_ENDIAN
-		RTMPDescriptorEndianChange((PUCHAR)pLastTxInfo, TYPE_TXINFO);
-#endif // RT_BIG_ENDIAN //
-		pLastTxInfo->USBDMANextVLD = 0;
-#ifdef RT_BIG_ENDIAN
-		RTMPDescriptorEndianChange((PUCHAR)pLastTxInfo, TYPE_TXINFO);
-#endif // RT_BIG_ENDIAN //
-	}
-
-	/*
-		We need to copy SavedPad when following condition matched!
-			1. Not the last round of the TxQueue and
-			2. any match of following cases:
-				(1). The End Position of this bulk out is reach to the Currenct Write position and
-						the TxInfo and related header already write to the CurWritePosition.
-			   		=>(ENextBulkOutPosition == CurWritePosition) && (CurWriteRealPos > CurWritePosition)
-
-				(2). The EndPosition of the bulk out is not reach to the Current Write Position.
-					=>(ENextBulkOutPosition != CurWritePosition)
-	*/
-	if ((bTxQLastRound == FALSE) &&
-		 (((pHTTXContext->ENextBulkOutPosition == pHTTXContext->CurWritePosition) && (pHTTXContext->CurWriteRealPos > pHTTXContext->CurWritePosition)) ||
-		  (pHTTXContext->ENextBulkOutPosition != pHTTXContext->CurWritePosition))
-		)
-	{
-		NdisMoveMemory(pHTTXContext->SavedPad, &pWirelessPkt[pHTTXContext->ENextBulkOutPosition], 8);
-		pHTTXContext->bCopySavePad = TRUE;
-		if (RTMPEqualMemory(pHTTXContext->SavedPad, allzero,4))
-		{
-			PUCHAR	pBuf = &pHTTXContext->SavedPad[0];
-			DBGPRINT_RAW(RT_DEBUG_ERROR,("WARNING-Zero-3:%02x%02x%02x%02x%02x%02x%02x%02x,CWPos=%ld, CWRPos=%ld, bCW=%d, NBPos=%ld, TBPos=%ld, TBSize=%ld\n",
-				pBuf[0], pBuf[1], pBuf[2],pBuf[3],pBuf[4], pBuf[5], pBuf[6],pBuf[7], pHTTXContext->CurWritePosition, pHTTXContext->CurWriteRealPos,
-				pHTTXContext->bCurWriting, pHTTXContext->NextBulkOutPosition, TmpBulkEndPos, ThisBulkSize));
-
-			pBuf = &pWirelessPkt[pHTTXContext->CurWritePosition];
-			DBGPRINT_RAW(RT_DEBUG_ERROR,("\tCWPos=%02x%02x%02x%02x%02x%02x%02x%02x\n", pBuf[0], pBuf[1], pBuf[2],pBuf[3],pBuf[4], pBuf[5], pBuf[6],pBuf[7]));
-		}
-		//DBGPRINT(RT_DEBUG_LOUD,("ENPos==CWPos=%ld, CWRPos=%ld, bCSPad=%d!\n", pHTTXContext->CurWritePosition, pHTTXContext->CurWriteRealPos, pHTTXContext->bCopySavePad));
-	}
-
-	if (pAd->bForcePrintTX == TRUE)
-		DBGPRINT(RT_DEBUG_TRACE,("BulkOut-A:Size=%ld, CWPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d!\n", ThisBulkSize, pHTTXContext->CurWritePosition, pHTTXContext->NextBulkOutPosition, pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad));
-	//DBGPRINT(RT_DEBUG_LOUD,("BulkOut-A:Size=%ld, CWPos=%ld, CWRPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d, bLRound=%d!\n", ThisBulkSize, pHTTXContext->CurWritePosition, pHTTXContext->CurWriteRealPos, pHTTXContext->NextBulkOutPosition, pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad, bTxQLastRound));
-
-		// USB DMA engine requires to pad extra 4 bytes. This pad doesn't count into real bulkoutsize.
-	pAppendant = &pWirelessPkt[TmpBulkEndPos];
-	NdisZeroMemory(pAppendant, 8);
-		ThisBulkSize += 4;
-		pHTTXContext->LastOne = TRUE;
-		if ((ThisBulkSize % pAd->BulkOutMaxPacketSize) == 0)
-			ThisBulkSize += 4;
-	pHTTXContext->BulkOutSize = ThisBulkSize;
-
-	pAd->watchDogTxPendingCnt[BulkOutPipeId] = 1;
-	BULK_OUT_UNLOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags2);
-
-	// Init Tx context descriptor
-	RTUSBInitHTTxDesc(pAd, pHTTXContext, BulkOutPipeId, ThisBulkSize, (usb_complete_t)RTUSBBulkOutDataPacketComplete);
-
-	pUrb = pHTTXContext->pUrb;
-	if((ret = RTUSB_SUBMIT_URB(pUrb))!=0)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("RTUSBBulkOutDataPacket: Submit Tx URB failed %d\n", ret));
-
-		BULK_OUT_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-		pAd->BulkOutPending[BulkOutPipeId] = FALSE;
-		pAd->watchDogTxPendingCnt[BulkOutPipeId] = 0;
-		BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-
-		return;
-	}
-
-	BULK_OUT_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-	pHTTXContext->IRPPending = TRUE;
-	BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-	pAd->BulkOutReq++;
-
-}
-
-
-VOID RTUSBBulkOutDataPacketComplete(purbb_t pUrb, struct pt_regs *pt_regs)
-{
-	PHT_TX_CONTEXT	pHTTXContext;
-	PRTMP_ADAPTER	pAd;
-	POS_COOKIE 		pObj;
-	UCHAR			BulkOutPipeId;
-
-
-	pHTTXContext	= (PHT_TX_CONTEXT)pUrb->context;
-	pAd 			= pHTTXContext->pAd;
-	pObj 			= (POS_COOKIE) pAd->OS_Cookie;
-
-	// Store BulkOut PipeId
-	BulkOutPipeId	= pHTTXContext->BulkOutPipeId;
-	pAd->BulkOutDataOneSecCount++;
-
-	switch (BulkOutPipeId)
-	{
-		case 0:
-				pObj->ac0_dma_done_task.data = (unsigned long)pUrb;
-				tasklet_hi_schedule(&pObj->ac0_dma_done_task);
-				break;
-		case 1:
-				pObj->ac1_dma_done_task.data = (unsigned long)pUrb;
-				tasklet_hi_schedule(&pObj->ac1_dma_done_task);
-				break;
-		case 2:
-				pObj->ac2_dma_done_task.data = (unsigned long)pUrb;
-				tasklet_hi_schedule(&pObj->ac2_dma_done_task);
-				break;
-		case 3:
-				pObj->ac3_dma_done_task.data = (unsigned long)pUrb;
-				tasklet_hi_schedule(&pObj->ac3_dma_done_task);
-				break;
-		case 4:
-				pObj->hcca_dma_done_task.data = (unsigned long)pUrb;
-				tasklet_hi_schedule(&pObj->hcca_dma_done_task);
-				break;
-	}
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	Note: NULL frame use BulkOutPipeId = 0
-
-	========================================================================
-*/
-VOID	RTUSBBulkOutNullFrame(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	PTX_CONTEXT		pNullContext = &(pAd->NullContext);
-	PURB			pUrb;
-	int				ret = 0;
-	unsigned long	IrqFlags;
-
-	RTMP_IRQ_LOCK(&pAd->BulkOutLock[0], IrqFlags);
-	if ((pAd->BulkOutPending[0] == TRUE) || RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NEED_STOP_TX))
-	{
-		RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[0], IrqFlags);
-		return;
-	}
-	pAd->BulkOutPending[0] = TRUE;
-	pAd->watchDogTxPendingCnt[0] = 1;
-	pNullContext->IRPPending = TRUE;
-	RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[0], IrqFlags);
-
-	// Increase Total transmit byte counter
-	pAd->RalinkCounters.TransmittedByteCount +=  pNullContext->BulkOutSize;
-
-
-	// Clear Null frame bulk flag
-	RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NULL);
-
-#ifdef RT_BIG_ENDIAN
-	RTMPDescriptorEndianChange((PUCHAR)pNullContext->TransferBuffer, TYPE_TXINFO);
-#endif // RT_BIG_ENDIAN //
-
-	// Init Tx context descriptor
-	RTUSBInitTxDesc(pAd, pNullContext, 0, (usb_complete_t)RTUSBBulkOutNullFrameComplete);
-
-	pUrb = pNullContext->pUrb;
-	if((ret = RTUSB_SUBMIT_URB(pUrb))!=0)
-	{
-		RTMP_IRQ_LOCK(&pAd->BulkOutLock[0], IrqFlags);
-		pAd->BulkOutPending[0] = FALSE;
-		pAd->watchDogTxPendingCnt[0] = 0;
-		pNullContext->IRPPending = FALSE;
-		RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[0], IrqFlags);
-
-		DBGPRINT(RT_DEBUG_ERROR, ("RTUSBBulkOutNullFrame: Submit Tx URB failed %d\n", ret));
-		return;
-	}
-
-}
-
-// NULL frame use BulkOutPipeId = 0
-VOID RTUSBBulkOutNullFrameComplete(purbb_t pUrb, struct pt_regs *pt_regs)
-{
-	PRTMP_ADAPTER		pAd;
-	PTX_CONTEXT			pNullContext;
-	NTSTATUS			Status;
-	POS_COOKIE			pObj;
-
-
-	pNullContext	= (PTX_CONTEXT)pUrb->context;
-	pAd 			= pNullContext->pAd;
-	Status 			= pUrb->status;
-
-	pObj = (POS_COOKIE) pAd->OS_Cookie;
-	pObj->null_frame_complete_task.data = (unsigned long)pUrb;
-	tasklet_hi_schedule(&pObj->null_frame_complete_task);
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	Note: MLME use BulkOutPipeId = 0
-
-	========================================================================
-*/
-VOID	RTUSBBulkOutMLMEPacket(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			Index)
-{
-	PTX_CONTEXT		pMLMEContext;
-	PURB			pUrb;
-	int				ret = 0;
-	unsigned long	IrqFlags;
-
-	pMLMEContext = (PTX_CONTEXT)pAd->MgmtRing.Cell[pAd->MgmtRing.TxDmaIdx].AllocVa;
-	pUrb = pMLMEContext->pUrb;
-
-	if ((pAd->MgmtRing.TxSwFreeIdx >= MGMT_RING_SIZE) ||
-		(pMLMEContext->InUse == FALSE) ||
-		(pMLMEContext->bWaitingBulkOut == FALSE))
-	{
-
-
-		// Clear MLME bulk flag
-		RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_MLME);
-
-		return;
-	}
-
-
-	RTMP_IRQ_LOCK(&pAd->BulkOutLock[MGMTPIPEIDX], IrqFlags);
-	if ((pAd->BulkOutPending[MGMTPIPEIDX] == TRUE) || RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NEED_STOP_TX))
-	{
-		RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[MGMTPIPEIDX], IrqFlags);
-		return;
-	}
-
-	pAd->BulkOutPending[MGMTPIPEIDX] = TRUE;
-	pAd->watchDogTxPendingCnt[MGMTPIPEIDX] = 1;
-	pMLMEContext->IRPPending = TRUE;
-	pMLMEContext->bWaitingBulkOut = FALSE;
-	RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[MGMTPIPEIDX], IrqFlags);
-
-	// Increase Total transmit byte counter
-	pAd->RalinkCounters.TransmittedByteCount +=  pMLMEContext->BulkOutSize;
-
-	// Clear MLME bulk flag
-	RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_MLME);
-
-#ifdef RT_BIG_ENDIAN
-	RTMPDescriptorEndianChange((PUCHAR)pMLMEContext->TransferBuffer, TYPE_TXINFO);
-#endif // RT_BIG_ENDIAN //
-
-	// Init Tx context descriptor
-	RTUSBInitTxDesc(pAd, pMLMEContext, MGMTPIPEIDX, (usb_complete_t)RTUSBBulkOutMLMEPacketComplete);
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-	//For mgmt urb buffer, because we use sk_buff, so we need to notify the USB controller do dma mapping.
-	pUrb->transfer_dma	= 0;
-	pUrb->transfer_flags &= (~URB_NO_TRANSFER_DMA_MAP);
-#endif
-
-	pUrb = pMLMEContext->pUrb;
-	if((ret = RTUSB_SUBMIT_URB(pUrb))!=0)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("RTUSBBulkOutMLMEPacket: Submit MLME URB failed %d\n", ret));
-		RTMP_IRQ_LOCK(&pAd->BulkOutLock[MGMTPIPEIDX], IrqFlags);
-		pAd->BulkOutPending[MGMTPIPEIDX] = FALSE;
-		pAd->watchDogTxPendingCnt[MGMTPIPEIDX] = 0;
-		pMLMEContext->IRPPending = FALSE;
-		pMLMEContext->bWaitingBulkOut = TRUE;
-		RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[MGMTPIPEIDX], IrqFlags);
-
-		return;
-	}
-
-	//DBGPRINT_RAW(RT_DEBUG_INFO, ("<---RTUSBBulkOutMLMEPacket \n"));
-//	printk("<---RTUSBBulkOutMLMEPacket,Cpu=%d!, Dma=%d, SwIdx=%d!\n", pAd->MgmtRing.TxCpuIdx, pAd->MgmtRing.TxDmaIdx, pAd->MgmtRing.TxSwFreeIdx);
-}
-
-
-VOID RTUSBBulkOutMLMEPacketComplete(purbb_t pUrb, struct pt_regs *pt_regs)
-{
-	PTX_CONTEXT			pMLMEContext;
-	PRTMP_ADAPTER		pAd;
-	NTSTATUS			Status;
-	POS_COOKIE 			pObj;
-	int					index;
-
-	//DBGPRINT_RAW(RT_DEBUG_INFO, ("--->RTUSBBulkOutMLMEPacketComplete\n"));
-	pMLMEContext	= (PTX_CONTEXT)pUrb->context;
-	pAd 			= pMLMEContext->pAd;
-	pObj 			= (POS_COOKIE)pAd->OS_Cookie;
-	Status			= pUrb->status;
-	index 			= pMLMEContext->SelfIdx;
-
-	pObj->mgmt_dma_done_task.data = (unsigned long)pUrb;
-	tasklet_hi_schedule(&pObj->mgmt_dma_done_task);
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	Note: PsPoll use BulkOutPipeId = 0
-
-	========================================================================
-*/
-VOID	RTUSBBulkOutPsPoll(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	PTX_CONTEXT		pPsPollContext = &(pAd->PsPollContext);
-	PURB			pUrb;
-	int				ret = 0;
-	unsigned long	IrqFlags;
-
-	RTMP_IRQ_LOCK(&pAd->BulkOutLock[0], IrqFlags);
-	if ((pAd->BulkOutPending[0] == TRUE) || RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NEED_STOP_TX))
-	{
-		RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[0], IrqFlags);
-		return;
-	}
-	pAd->BulkOutPending[0] = TRUE;
-	pAd->watchDogTxPendingCnt[0] = 1;
-	pPsPollContext->IRPPending = TRUE;
-	RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[0], IrqFlags);
-
-
-	// Clear PS-Poll bulk flag
-	RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_PSPOLL);
-
-#ifdef RT_BIG_ENDIAN
-	RTMPDescriptorEndianChange((PUCHAR)pPsPollContext->TransferBuffer, TYPE_TXINFO);
-#endif // RT_BIG_ENDIAN //
-
-	// Init Tx context descriptor
-	RTUSBInitTxDesc(pAd, pPsPollContext, MGMTPIPEIDX, (usb_complete_t)RTUSBBulkOutPsPollComplete);
-
-	pUrb = pPsPollContext->pUrb;
-	if((ret = RTUSB_SUBMIT_URB(pUrb))!=0)
-	{
-		RTMP_IRQ_LOCK(&pAd->BulkOutLock[0], IrqFlags);
-		pAd->BulkOutPending[0] = FALSE;
-		pAd->watchDogTxPendingCnt[0] = 0;
-		pPsPollContext->IRPPending = FALSE;
-		RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[0], IrqFlags);
-
-		DBGPRINT(RT_DEBUG_ERROR, ("RTUSBBulkOutPsPoll: Submit Tx URB failed %d\n", ret));
-		return;
-	}
-
-}
-
-// PS-Poll frame use BulkOutPipeId = 0
-VOID RTUSBBulkOutPsPollComplete(purbb_t pUrb,struct pt_regs *pt_regs)
-{
-	PRTMP_ADAPTER		pAd;
-	PTX_CONTEXT			pPsPollContext;
-	NTSTATUS			Status;
-	POS_COOKIE			pObj;
-
-
-	pPsPollContext= (PTX_CONTEXT)pUrb->context;
-	pAd = pPsPollContext->pAd;
-	Status = pUrb->status;
-	pObj = (POS_COOKIE) pAd->OS_Cookie;
-	pObj->pspoll_frame_complete_task.data = (unsigned long)pUrb;
-	tasklet_hi_schedule(&pObj->pspoll_frame_complete_task);
-
-}
-
-VOID DoBulkIn(IN RTMP_ADAPTER *pAd)
-{
-	PRX_CONTEXT		pRxContext;
-	PURB			pUrb;
-	int				ret = 0;
-	unsigned long	IrqFlags;
-
-	RTMP_IRQ_LOCK(&pAd->BulkInLock, IrqFlags);
-	pRxContext = &(pAd->RxContext[pAd->NextRxBulkInIndex]);
-	if ((pAd->PendingRx > 0) || (pRxContext->Readable == TRUE) || (pRxContext->InUse == TRUE))
-	{
-		RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
-		return;
-	}
-	pRxContext->InUse = TRUE;
-	pRxContext->IRPPending = TRUE;
-	pAd->PendingRx++;
-	pAd->BulkInReq++;
-	RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
-
-	// Init Rx context descriptor
-	NdisZeroMemory(pRxContext->TransferBuffer, pRxContext->BulkInOffset);
-	RTUSBInitRxDesc(pAd, pRxContext);
-
-	pUrb = pRxContext->pUrb;
-	if ((ret = RTUSB_SUBMIT_URB(pUrb))!=0)
-	{	// fail
-
-		RTMP_IRQ_LOCK(&pAd->BulkInLock, IrqFlags);
-		pRxContext->InUse = FALSE;
-		pRxContext->IRPPending = FALSE;
-		pAd->PendingRx--;
-		pAd->BulkInReq--;
-		RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
-		DBGPRINT(RT_DEBUG_ERROR, ("RTUSBBulkReceive: Submit Rx URB failed %d\n", ret));
-	}
-	else
-	{	// success
-		ASSERT((pRxContext->InUse == pRxContext->IRPPending));
-		//printk("BIDone, Pend=%d,BIIdx=%d,BIRIdx=%d!\n", pAd->PendingRx, pAd->NextRxBulkInIndex, pAd->NextRxBulkInReadIndex);
-	}
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-	USB_RxPacket initializes a URB and uses the Rx IRP to submit it
-	to USB. It checks if an Rx Descriptor is available and passes the
-	the coresponding buffer to be filled. If no descriptor is available
-	fails the request. When setting the completion routine we pass our
-	Adapter Object as Context.
-
-	Arguments:
-
-	Return Value:
-		TRUE			found matched tuple cache
-		FALSE			no matched found
-
-	Note:
-
-	========================================================================
-*/
-#define fRTMP_ADAPTER_NEED_STOP_RX		\
-		(fRTMP_ADAPTER_NIC_NOT_EXIST | fRTMP_ADAPTER_HALT_IN_PROGRESS |	\
-		 fRTMP_ADAPTER_RADIO_OFF | fRTMP_ADAPTER_RESET_IN_PROGRESS | \
-		 fRTMP_ADAPTER_REMOVE_IN_PROGRESS | fRTMP_ADAPTER_BULKIN_RESET)
-
-#define fRTMP_ADAPTER_NEED_STOP_HANDLE_RX	\
-		(fRTMP_ADAPTER_NIC_NOT_EXIST | fRTMP_ADAPTER_HALT_IN_PROGRESS |	\
-		 fRTMP_ADAPTER_RADIO_OFF | fRTMP_ADAPTER_RESET_IN_PROGRESS | \
-		 fRTMP_ADAPTER_REMOVE_IN_PROGRESS)
-
-VOID	RTUSBBulkReceive(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	PRX_CONTEXT		pRxContext;
-	unsigned long	IrqFlags;
-
-
-	/* sanity check */
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NEED_STOP_HANDLE_RX))
-		return;
-
-	while(1)
-	{
-
-		RTMP_IRQ_LOCK(&pAd->BulkInLock, IrqFlags);
-		pRxContext = &(pAd->RxContext[pAd->NextRxBulkInReadIndex]);
-		if (((pRxContext->InUse == FALSE) && (pRxContext->Readable == TRUE)) &&
-			(pRxContext->bRxHandling == FALSE))
-		{
-			pRxContext->bRxHandling = TRUE;
-			RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
-
-			// read RxContext, Since not
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				STARxDoneInterruptHandle(pAd, TRUE);
-#endif // CONFIG_STA_SUPPORT //
-
-			// Finish to handle this bulkIn buffer.
-			RTMP_IRQ_LOCK(&pAd->BulkInLock, IrqFlags);
-			pRxContext->BulkInOffset = 0;
-			pRxContext->Readable = FALSE;
-			pRxContext->bRxHandling = FALSE;
-			pAd->ReadPosition = 0;
-			pAd->TransferBufferLength = 0;
-			INC_RING_INDEX(pAd->NextRxBulkInReadIndex, RX_RING_SIZE);
-			RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
-
-		}
-		else
-		{
-			RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
-			break;
-		}
-	}
-
-	if (!(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NEED_STOP_RX)))
-		DoBulkIn(pAd);
-
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		This routine process Rx Irp and call rx complete function.
-
-	Arguments:
-		DeviceObject	Pointer to the device object for next lower
-						device. DeviceObject passed in here belongs to
-						the next lower driver in the stack because we
-						were invoked via IoCallDriver in USB_RxPacket
-						AND it is not OUR device object
-	  Irp				Ptr to completed IRP
-	  Context			Ptr to our Adapter object (context specified
-						in IoSetCompletionRoutine
-
-	Return Value:
-		Always returns STATUS_MORE_PROCESSING_REQUIRED
-
-	Note:
-		Always returns STATUS_MORE_PROCESSING_REQUIRED
-	========================================================================
-*/
-VOID RTUSBBulkRxComplete(purbb_t pUrb, struct pt_regs *pt_regs)
-{
-	// use a receive tasklet to handle received packets;
-	// or sometimes hardware IRQ will be disabled here, so we can not
-	// use spin_lock_bh()/spin_unlock_bh() after IRQ is disabled. :<
-	PRX_CONTEXT		pRxContext;
-	PRTMP_ADAPTER	pAd;
-	POS_COOKIE 		pObj;
-
-
-	pRxContext	= (PRX_CONTEXT)pUrb->context;
-	pAd 		= pRxContext->pAd;
-	pObj 		= (POS_COOKIE) pAd->OS_Cookie;
-
-	pObj->rx_done_task.data = (unsigned long)pUrb;
-	tasklet_hi_schedule(&pObj->rx_done_task);
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTUSBKickBulkOut(
-	IN	PRTMP_ADAPTER pAd)
-{
-	// BulkIn Reset will reset whole USB PHY. So we need to make sure fRTMP_ADAPTER_BULKIN_RESET not flaged.
-	if (!RTMP_TEST_FLAG(pAd ,fRTMP_ADAPTER_NEED_STOP_TX)
-#ifdef RALINK_ATE
-		&& !(ATE_ON(pAd))
-#endif // RALINK_ATE //
-		)
-	{
-		// 2. PS-Poll frame is next
-		if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_PSPOLL))
-		{
-			RTUSBBulkOutPsPoll(pAd);
-		}
-
-		// 5. Mlme frame is next
-		else if ((RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_MLME)) &&
-				 (pAd->MgmtRing.TxSwFreeIdx < MGMT_RING_SIZE))
-		{
-			RTUSBBulkOutMLMEPacket(pAd, pAd->MgmtRing.TxDmaIdx);
-		}
-
-		// 6. Data frame normal is next
-		if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL))
-		{
-			if (((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) ||
-				(!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
-				))
-			{
-				RTUSBBulkOutDataPacket(pAd, 0, pAd->NextBulkOutIndex[0]);
-			}
-		}
-		if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL_2))
-		{
-			if (((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) ||
-				(!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
-				))
-			{
-				RTUSBBulkOutDataPacket(pAd, 1, pAd->NextBulkOutIndex[1]);
-			}
-		}
-		if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL_3))
-		{
-			if (((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) ||
-				(!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
-				))
-			{
-				RTUSBBulkOutDataPacket(pAd, 2, pAd->NextBulkOutIndex[2]);
-			}
-		}
-		if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL_4))
-		{
-			if (((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) ||
-				(!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
-				))
-			{
-				RTUSBBulkOutDataPacket(pAd, 3, pAd->NextBulkOutIndex[3]);
-			}
-		}
-		//PS packets use HCCA queue when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA)
-		if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL_5))
-		{
-			if (((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) ||
-				(!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
-				))
-			{
-			}
-		}
-
-		// 7. Null frame is the last
-		else if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NULL))
-		{
-			if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-			{
-				RTUSBBulkOutNullFrame(pAd);
-			}
-		}
-
-		// 8. No data avaliable
-		else
-		{
-
-		}
-	}
-#ifdef RALINK_ATE
-	/* If the mode is in ATE mode. */
-	else if((ATE_ON(pAd)) &&
-		!RTMP_TEST_FLAG(pAd ,fRTMP_ADAPTER_NEED_STOP_TX))// PETER : watch out !
-	{
-		if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE))
-		{
-			ATE_RTUSBBulkOutDataPacket(pAd, 0);
-		}
-	}
-#endif // RALINK_ATE //
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-	Call from Reset action after BulkOut failed.
-	Arguments:
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTUSBCleanUpDataBulkOutQueue(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	UCHAR			Idx;
-	PHT_TX_CONTEXT	pTxContext;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("--->CleanUpDataBulkOutQueue\n"));
-
-	for (Idx = 0; Idx < 4; Idx++)
-	{
-		pTxContext = &pAd->TxContext[Idx];
-
-		pTxContext->CurWritePosition = pTxContext->NextBulkOutPosition;
-		pTxContext->LastOne = FALSE;
-		NdisAcquireSpinLock(&pAd->BulkOutLock[Idx]);
-		pAd->BulkOutPending[Idx] = FALSE;
-		NdisReleaseSpinLock(&pAd->BulkOutLock[Idx]);
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<---CleanUpDataBulkOutQueue\n"));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTUSBCleanUpMLMEBulkOutQueue(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	DBGPRINT(RT_DEBUG_TRACE, ("--->CleanUpMLMEBulkOutQueue\n"));
-	DBGPRINT(RT_DEBUG_TRACE, ("<---CleanUpMLMEBulkOutQueue\n"));
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTUSBCancelPendingIRPs(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	RTUSBCancelPendingBulkInIRP(pAd);
-	RTUSBCancelPendingBulkOutIRP(pAd);
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTUSBCancelPendingBulkInIRP(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	PRX_CONTEXT		pRxContext;
-	UINT			i;
-
-	DBGPRINT_RAW(RT_DEBUG_TRACE, ("--->RTUSBCancelPendingBulkInIRP\n"));
-	for ( i = 0; i < (RX_RING_SIZE); i++)
-	{
-		pRxContext = &(pAd->RxContext[i]);
-		if(pRxContext->IRPPending == TRUE)
-		{
-			RTUSB_UNLINK_URB(pRxContext->pUrb);
-			pRxContext->IRPPending = FALSE;
-			pRxContext->InUse = FALSE;
-			//NdisInterlockedDecrement(&pAd->PendingRx);
-			//pAd->PendingRx--;
-		}
-	}
-	DBGPRINT_RAW(RT_DEBUG_TRACE, ("<---RTUSBCancelPendingBulkInIRP\n"));
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTUSBCancelPendingBulkOutIRP(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	PHT_TX_CONTEXT		pHTTXContext;
-	PTX_CONTEXT			pMLMEContext;
-	PTX_CONTEXT			pBeaconContext;
-	PTX_CONTEXT			pNullContext;
-	PTX_CONTEXT			pPsPollContext;
-	PTX_CONTEXT			pRTSContext;
-	UINT				i, Idx;
-//	unsigned int 		IrqFlags;
-//	NDIS_SPIN_LOCK		*pLock;
-//	BOOLEAN				*pPending;
-
-
-//	pLock = &pAd->BulkOutLock[MGMTPIPEIDX];
-//	pPending = &pAd->BulkOutPending[MGMTPIPEIDX];
-
-	for (Idx = 0; Idx < 4; Idx++)
-	{
-		pHTTXContext = &(pAd->TxContext[Idx]);
-
-		if (pHTTXContext->IRPPending == TRUE)
-		{
-
-			// Get the USB_CONTEXT and cancel it's IRP; the completion routine will itself
-			// remove it from the HeadPendingSendList and NULL out HeadPendingSendList
-			//	when the last IRP on the list has been	cancelled; that's how we exit this loop
-			//
-
-			RTUSB_UNLINK_URB(pHTTXContext->pUrb);
-
-			// Sleep 200 microseconds to give cancellation time to work
-			RTMPusecDelay(200);
-		}
-
-#ifdef RALINK_ATE
-		pHTTXContext->bCopySavePad = 0;
-		pHTTXContext->CurWritePosition = 0;
-		pHTTXContext->CurWriteRealPos = 0;
-		pHTTXContext->bCurWriting = FALSE;
-		pHTTXContext->NextBulkOutPosition = 0;
-		pHTTXContext->ENextBulkOutPosition = 0;
-#endif // RALINK_ATE //
-		pAd->BulkOutPending[Idx] = FALSE;
-	}
-
-	//RTMP_IRQ_LOCK(pLock, IrqFlags);
-	for (i = 0; i < MGMT_RING_SIZE; i++)
-	{
-		pMLMEContext = (PTX_CONTEXT)pAd->MgmtRing.Cell[i].AllocVa;
-		if(pMLMEContext && (pMLMEContext->IRPPending == TRUE))
-		{
-
-			// Get the USB_CONTEXT and cancel it's IRP; the completion routine will itself
-			// remove it from the HeadPendingSendList and NULL out HeadPendingSendList
-			//	when the last IRP on the list has been	cancelled; that's how we exit this loop
-			//
-
-			RTUSB_UNLINK_URB(pMLMEContext->pUrb);
-			pMLMEContext->IRPPending = FALSE;
-
-			// Sleep 200 microsecs to give cancellation time to work
-			RTMPusecDelay(200);
-		}
-	}
-	pAd->BulkOutPending[MGMTPIPEIDX] = FALSE;
-	//RTMP_IRQ_UNLOCK(pLock, IrqFlags);
-
-
-	for (i = 0; i < BEACON_RING_SIZE; i++)
-	{
-		pBeaconContext = &(pAd->BeaconContext[i]);
-
-		if(pBeaconContext->IRPPending == TRUE)
-		{
-
-			// Get the USB_CONTEXT and cancel it's IRP; the completion routine will itself
-			// remove it from the HeadPendingSendList and NULL out HeadPendingSendList
-			//	when the last IRP on the list has been	cancelled; that's how we exit this loop
-			//
-
-			RTUSB_UNLINK_URB(pBeaconContext->pUrb);
-
-			// Sleep 200 microsecs to give cancellation time to work
-			RTMPusecDelay(200);
-		}
-	}
-
-	pNullContext = &(pAd->NullContext);
-	if (pNullContext->IRPPending == TRUE)
-		RTUSB_UNLINK_URB(pNullContext->pUrb);
-
-	pRTSContext = &(pAd->RTSContext);
-	if (pRTSContext->IRPPending == TRUE)
-		RTUSB_UNLINK_URB(pRTSContext->pUrb);
-
-	pPsPollContext = &(pAd->PsPollContext);
-	if (pPsPollContext->IRPPending == TRUE)
-		RTUSB_UNLINK_URB(pPsPollContext->pUrb);
-
-	for (Idx = 0; Idx < 4; Idx++)
-	{
-		NdisAcquireSpinLock(&pAd->BulkOutLock[Idx]);
-		pAd->BulkOutPending[Idx] = FALSE;
-		NdisReleaseSpinLock(&pAd->BulkOutLock[Idx]);
-	}
-}
-
+#include "../../rt2870/common/rtusb_bulk.c"
diff --git a/drivers/staging/rt3070/common/rtusb_data.c b/drivers/staging/rt3070/common/rtusb_data.c
index 521309a2ae5..d05deb870f4 100644
--- a/drivers/staging/rt3070/common/rtusb_data.c
+++ b/drivers/staging/rt3070/common/rtusb_data.c
@@ -1,218 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	rtusb_data.c
-
-	Abstract:
-	Ralink USB driver Tx/Rx functions.
-
-	Revision History:
-	Who         When          What
-	--------    ----------    ----------------------------------------------
-	Jan            03-25-2006    created
-
-*/
-#include	"../rt_config.h"
-
-extern  UCHAR Phy11BGNextRateUpward[]; // defined in mlme.c
-extern UCHAR	EpToQueue[];
-
-
-VOID REPORT_AMSDU_FRAMES_TO_LLC(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pData,
-	IN	ULONG			DataSize)
-{
-	PNDIS_PACKET	pPacket;
-	UINT			nMSDU;
-	struct			sk_buff *pSkb;
-
-	nMSDU = 0;
-	/* allocate a rx packet */
-	pSkb = dev_alloc_skb(RX_BUFFER_AGGRESIZE);
-	pPacket = (PNDIS_PACKET)OSPKT_TO_RTPKT(pSkb);
-	if (pSkb)
-	{
-
-		/* convert 802.11 to 802.3 packet */
-		pSkb->dev = get_netdev_from_bssid(pAd, BSS0);
-		RTMP_SET_PACKET_SOURCE(pPacket, PKTSRC_NDIS);
-		deaggregate_AMSDU_announce(pAd, pPacket, pData, DataSize);
-	}
-	else
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("Can't allocate skb\n"));
-	}
-}
-
-NDIS_STATUS	RTUSBFreeDescriptorRequest(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			BulkOutPipeId,
-	IN	UINT32			NumberRequired)
-{
-//	UCHAR			FreeNumber = 0;
-//	UINT			Index;
-	NDIS_STATUS		Status = NDIS_STATUS_FAILURE;
-	unsigned long   IrqFlags;
-	HT_TX_CONTEXT	*pHTTXContext;
-
-
-	pHTTXContext = &pAd->TxContext[BulkOutPipeId];
-	RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags);
-	if ((pHTTXContext->CurWritePosition < pHTTXContext->NextBulkOutPosition) && ((pHTTXContext->CurWritePosition + NumberRequired + LOCAL_TXBUF_SIZE) > pHTTXContext->NextBulkOutPosition))
-	{
-
-		RTUSB_SET_BULK_FLAG(pAd, (fRTUSB_BULK_OUT_DATA_NORMAL << BulkOutPipeId));
-	}
-	else if ((pHTTXContext->CurWritePosition == 8) && (pHTTXContext->NextBulkOutPosition < (NumberRequired + LOCAL_TXBUF_SIZE)))
-	{
-		RTUSB_SET_BULK_FLAG(pAd, (fRTUSB_BULK_OUT_DATA_NORMAL << BulkOutPipeId));
-	}
-	else if (pHTTXContext->bCurWriting == TRUE)
-	{
-		DBGPRINT(RT_DEBUG_TRACE,("RTUSBFreeD c3 --> QueIdx=%d, CWPos=%ld, NBOutPos=%ld!\n", BulkOutPipeId, pHTTXContext->CurWritePosition, pHTTXContext->NextBulkOutPosition));
-		RTUSB_SET_BULK_FLAG(pAd, (fRTUSB_BULK_OUT_DATA_NORMAL << BulkOutPipeId));
-	}
-	else
-	{
-		Status = NDIS_STATUS_SUCCESS;
-	}
-	RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags);
-
-
-	return (Status);
-}
-
-
-NDIS_STATUS RTUSBFreeDescriptorRelease(
-	IN RTMP_ADAPTER *pAd,
-	IN UCHAR		BulkOutPipeId)
-{
-	unsigned long   IrqFlags;
-	HT_TX_CONTEXT	*pHTTXContext;
-
-	pHTTXContext = &pAd->TxContext[BulkOutPipeId];
-	RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags);
-	pHTTXContext->bCurWriting = FALSE;
-	RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags);
-
-	return (NDIS_STATUS_SUCCESS);
-}
-
-
-BOOLEAN	RTUSBNeedQueueBackForAgg(
-	IN RTMP_ADAPTER *pAd,
-	IN UCHAR		BulkOutPipeId)
-{
-	unsigned long   IrqFlags;
-	HT_TX_CONTEXT	*pHTTXContext;
-	BOOLEAN			needQueBack = FALSE;
-
-	pHTTXContext = &pAd->TxContext[BulkOutPipeId];
-
-	RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags);
-	if ((pHTTXContext->IRPPending == TRUE)  /*&& (pAd->TxSwQueue[BulkOutPipeId].Number == 0) */)
-	{
-		if ((pHTTXContext->CurWritePosition < pHTTXContext->ENextBulkOutPosition) &&
-			(((pHTTXContext->ENextBulkOutPosition+MAX_AGGREGATION_SIZE) < MAX_TXBULK_LIMIT) || (pHTTXContext->CurWritePosition > MAX_AGGREGATION_SIZE)))
-		{
-			needQueBack = TRUE;
-		}
-		else if ((pHTTXContext->CurWritePosition > pHTTXContext->ENextBulkOutPosition) &&
-				 ((pHTTXContext->ENextBulkOutPosition + MAX_AGGREGATION_SIZE) < pHTTXContext->CurWritePosition))
-		{
-			needQueBack = TRUE;
-		}
-	}
-	RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags);
-
-	return needQueBack;
-
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTUSBRejectPendingPackets(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	UCHAR			Index;
-	PQUEUE_ENTRY	pEntry;
-	PNDIS_PACKET	pPacket;
-	PQUEUE_HEADER	pQueue;
-
-
-	for (Index = 0; Index < 4; Index++)
-	{
-		NdisAcquireSpinLock(&pAd->TxSwQueueLock[Index]);
-		while (pAd->TxSwQueue[Index].Head != NULL)
-		{
-			pQueue = (PQUEUE_HEADER) &(pAd->TxSwQueue[Index]);
-			pEntry = RemoveHeadQueue(pQueue);
-			pPacket = QUEUE_ENTRY_TO_PACKET(pEntry);
-			RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
-		}
-		NdisReleaseSpinLock(&pAd->TxSwQueueLock[Index]);
-
-	}
-
-}
-
-VOID RTMPWriteTxInfo(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PTXINFO_STRUC 	pTxInfo,
-	IN	  USHORT		USBDMApktLen,
-	IN	  BOOLEAN		bWiv,
-	IN	  UCHAR			QueueSel,
-	IN	  UCHAR			NextValid,
-	IN	  UCHAR			TxBurst)
-{
-	pTxInfo->USBDMATxPktLen = USBDMApktLen;
-	pTxInfo->QSEL = QueueSel;
-	if (QueueSel != FIFO_EDCA)
-		DBGPRINT(RT_DEBUG_TRACE, ("====> QueueSel != FIFO_EDCA<============\n"));
-	pTxInfo->USBDMANextVLD = FALSE; //NextValid;  // Need to check with Jan about this.
-	pTxInfo->USBDMATxburst = TxBurst;
-	pTxInfo->WIV = bWiv;
-	pTxInfo->SwUseLastRound = 0;
-	pTxInfo->rsv = 0;
-	pTxInfo->rsv2 = 0;
-}
-
+#include "../../rt2870/common/rtusb_data.c"
diff --git a/drivers/staging/rt3070/common/rtusb_io.c b/drivers/staging/rt3070/common/rtusb_io.c
index a6a52e3445f..20a0b56e58b 100644
--- a/drivers/staging/rt3070/common/rtusb_io.c
+++ b/drivers/staging/rt3070/common/rtusb_io.c
@@ -1,1908 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
- 	Module Name:
-	rtusb_io.c
-
-	Abstract:
-
-	Revision History:
-	Who			When	    What
-	--------	----------  ----------------------------------------------
-	Name		Date	    Modification logs
-	Paul Lin    06-25-2004  created
-*/
-
-#include	"../rt_config.h"
-
-
-/*
-	========================================================================
-
-	Routine Description: NIC initialization complete
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-
-NTSTATUS	RTUSBFirmwareRun(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	NTSTATUS	Status;
-
-	Status = RTUSB_VendorRequest(
-		pAd,
-		USBD_TRANSFER_DIRECTION_OUT,
-		DEVICE_VENDOR_REQUEST_OUT,
-		0x01,
-		0x8,
-		0,
-		NULL,
-		0);
-
-	return Status;
-}
-
-
-
-/*
-	========================================================================
-
-	Routine Description: Write Firmware to NIC.
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-NTSTATUS RTUSBFirmwareWrite(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR		pFwImage,
-	IN ULONG		FwLen)
-{
-	UINT32		MacReg;
-	NTSTATUS 	Status;
-//	ULONG 		i;
-	USHORT		writeLen;
-
-	Status = RTUSBReadMACRegister(pAd, MAC_CSR0, &MacReg);
-
-
-	writeLen = FwLen;
-	RTUSBMultiWrite(pAd, FIRMWARE_IMAGE_BASE, pFwImage, writeLen);
-
-	Status = RTUSBWriteMACRegister(pAd, 0x7014, 0xffffffff);
-	Status = RTUSBWriteMACRegister(pAd, 0x701c, 0xffffffff);
-	Status = RTUSBFirmwareRun(pAd);
-
-	RTMPusecDelay(10000);
-	RTUSBWriteMACRegister(pAd,H2M_MAILBOX_CSR,0);
-	AsicSendCommandToMcu(pAd, 0x72, 0x00, 0x00, 0x00);//reset rf by MCU supported by new firmware
-
-	return Status;
-}
-
-
-/*
-	========================================================================
-
-	Routine Description: Get current firmware operation mode (Return Value)
-
-	Arguments:
-
-	Return Value:
-		0 or 1 = Downloaded by host driver
-		others = Driver doesn't download firmware
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-NTSTATUS	RTUSBFirmwareOpmode(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUINT32			pValue)
-{
-	NTSTATUS	Status;
-
-	Status = RTUSB_VendorRequest(
-		pAd,
-		(USBD_TRANSFER_DIRECTION_IN | USBD_SHORT_TRANSFER_OK),
-		DEVICE_VENDOR_REQUEST_IN,
-		0x1,
-		0x11,
-		0,
-		pValue,
-		4);
-	return Status;
-}
-NTSTATUS	RTUSBVenderReset(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	NTSTATUS	Status;
-	DBGPRINT_RAW(RT_DEBUG_ERROR, ("-->RTUSBVenderReset\n"));
-	Status = RTUSB_VendorRequest(
-		pAd,
-		USBD_TRANSFER_DIRECTION_OUT,
-		DEVICE_VENDOR_REQUEST_OUT,
-		0x01,
-		0x1,
-		0,
-		NULL,
-		0);
-
-	DBGPRINT_RAW(RT_DEBUG_ERROR, ("<--RTUSBVenderReset\n"));
-	return Status;
-}
-/*
-	========================================================================
-
-	Routine Description: Read various length data from RT2573
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-NTSTATUS	RTUSBMultiRead(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT			Offset,
-	OUT	PUCHAR			pData,
-	IN	USHORT			length)
-{
-	NTSTATUS	Status;
-
-	Status = RTUSB_VendorRequest(
-		pAd,
-		(USBD_TRANSFER_DIRECTION_IN | USBD_SHORT_TRANSFER_OK),
-		DEVICE_VENDOR_REQUEST_IN,
-		0x7,
-		0,
-		Offset,
-		pData,
-		length);
-
-	return Status;
-}
-
-/*
-	========================================================================
-
-	Routine Description: Write various length data to RT2573
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-NTSTATUS	RTUSBMultiWrite_OneByte(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT			Offset,
-	IN	PUCHAR			pData)
-{
-	NTSTATUS	Status;
-
-	// TODO: In 2870, use this funciton carefully cause it's not stable.
-	Status = RTUSB_VendorRequest(
-		pAd,
-		USBD_TRANSFER_DIRECTION_OUT,
-		DEVICE_VENDOR_REQUEST_OUT,
-		0x6,
-		0,
-		Offset,
-		pData,
-		1);
-
-	return Status;
-}
-
-NTSTATUS	RTUSBMultiWrite(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT			Offset,
-	IN	PUCHAR			pData,
-	IN	USHORT			length)
-{
-	NTSTATUS	Status;
-
-
-        USHORT          index = 0,Value;
-        PUCHAR          pSrc = pData;
-        USHORT          resude = 0;
-
-        resude = length % 2;
-		length  += resude;
-		do
-		{
-			Value =(USHORT)( *pSrc  | (*(pSrc + 1) << 8));
-		Status = RTUSBSingleWrite(pAd,Offset + index,Value);
-            index +=2;
-            length -= 2;
-            pSrc = pSrc + 2;
-        }while(length > 0);
-
-	return Status;
-}
-
-
-NTSTATUS RTUSBSingleWrite(
-	IN 	RTMP_ADAPTER 	*pAd,
-	IN	USHORT			Offset,
-	IN	USHORT			Value)
-{
-	NTSTATUS	Status;
-
-	Status = RTUSB_VendorRequest(
-		pAd,
-		USBD_TRANSFER_DIRECTION_OUT,
-		DEVICE_VENDOR_REQUEST_OUT,
-		0x2,
-		Value,
-		Offset,
-		NULL,
-		0);
-
-	return Status;
-
-}
-
-
-/*
-	========================================================================
-
-	Routine Description: Read 32-bit MAC register
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-NTSTATUS	RTUSBReadMACRegister(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT			Offset,
-	OUT	PUINT32			pValue)
-{
-	NTSTATUS	Status;
-	UINT32		localVal;
-
-	Status = RTUSB_VendorRequest(
-		pAd,
-		(USBD_TRANSFER_DIRECTION_IN | USBD_SHORT_TRANSFER_OK),
-		DEVICE_VENDOR_REQUEST_IN,
-		0x7,
-		0,
-		Offset,
-		&localVal,
-		4);
-
-	*pValue = le2cpu32(localVal);
-
-
-	if (Status < 0)
-		*pValue = 0xffffffff;
-
-	return Status;
-}
-
-
-/*
-	========================================================================
-
-	Routine Description: Write 32-bit MAC register
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-NTSTATUS	RTUSBWriteMACRegister(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT			Offset,
-	IN	UINT32			Value)
-{
-	NTSTATUS	Status;
-	UINT32		localVal;
-
-	localVal = Value;
-
-	Status = RTUSBSingleWrite(pAd, Offset, (USHORT)(localVal & 0xffff));
-	Status = RTUSBSingleWrite(pAd, Offset + 2, (USHORT)((localVal & 0xffff0000) >> 16));
-
-	return Status;
-}
-
-
-
-#if 1
-/*
-	========================================================================
-
-	Routine Description: Read 8-bit BBP register
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-NTSTATUS	RTUSBReadBBPRegister(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			Id,
-	IN	PUCHAR			pValue)
-{
-	BBP_CSR_CFG_STRUC	BbpCsr;
-	UINT			i = 0;
-	NTSTATUS		status;
-
-	// Verify the busy condition
-	do
-	{
-		status = RTUSBReadMACRegister(pAd, BBP_CSR_CFG, &BbpCsr.word);
-		if(status >= 0)
-		{
-		if (!(BbpCsr.field.Busy == BUSY))
-			break;
-		}
-		printk("RTUSBReadBBPRegister(BBP_CSR_CFG_1):retry count=%d!\n", i);
-		i++;
-	}
-	while ((i < RETRY_LIMIT) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)));
-
-	if ((i == RETRY_LIMIT) || (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
-	{
-		//
-		// Read failed then Return Default value.
-		//
-		*pValue = pAd->BbpWriteLatch[Id];
-
-		DBGPRINT_RAW(RT_DEBUG_ERROR, ("Retry count exhausted or device removed!!!\n"));
-		return STATUS_UNSUCCESSFUL;
-	}
-
-	// Prepare for write material
-	BbpCsr.word 				= 0;
-	BbpCsr.field.fRead			= 1;
-	BbpCsr.field.Busy			= 1;
-	BbpCsr.field.RegNum 		= Id;
-	RTUSBWriteMACRegister(pAd, BBP_CSR_CFG, BbpCsr.word);
-
-	i = 0;
-	// Verify the busy condition
-	do
-	{
-		status = RTUSBReadMACRegister(pAd, BBP_CSR_CFG, &BbpCsr.word);
-		if (status >= 0)
-		{
-		if (!(BbpCsr.field.Busy == BUSY))
-		{
-			*pValue = (UCHAR)BbpCsr.field.Value;
-			break;
-		}
-		}
-		printk("RTUSBReadBBPRegister(BBP_CSR_CFG_2):retry count=%d!\n", i);
-		i++;
-	}
-	while ((i < RETRY_LIMIT) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)));
-
-	if ((i == RETRY_LIMIT) || (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
-	{
-		//
-		// Read failed then Return Default value.
-		//
-		*pValue = pAd->BbpWriteLatch[Id];
-
-		DBGPRINT_RAW(RT_DEBUG_ERROR, ("Retry count exhausted or device removed!!!\n"));
-		return STATUS_UNSUCCESSFUL;
-	}
-
-	return STATUS_SUCCESS;
-}
-#else
-/*
-	========================================================================
-
-	Routine Description: Read 8-bit BBP register via firmware
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-NTSTATUS	RTUSBReadBBPRegister(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			Id,
-	IN	PUCHAR			pValue)
-{
-	BBP_CSR_CFG_STRUC	BbpCsr;
-	int					i, k;
-	for (i=0; i<MAX_BUSY_COUNT; i++)
-	{
-		RTUSBReadMACRegister(pAd, H2M_BBP_AGENT, &BbpCsr.word);
-		if (BbpCsr.field.Busy == BUSY)
-		{
-			continue;
-		}
-		BbpCsr.word = 0;
-		BbpCsr.field.fRead = 1;
-		BbpCsr.field.BBP_RW_MODE = 1;
-		BbpCsr.field.Busy = 1;
-		BbpCsr.field.RegNum = Id;
-		RTUSBWriteMACRegister(pAd, H2M_BBP_AGENT, BbpCsr.word);
-		AsicSendCommandToMcu(pAd, 0x80, 0xff, 0x0, 0x0);
-		for (k=0; k<MAX_BUSY_COUNT; k++)
-		{
-			RTUSBReadMACRegister(pAd, H2M_BBP_AGENT, &BbpCsr.word);
-			if (BbpCsr.field.Busy == IDLE)
-				break;
-		}
-		if ((BbpCsr.field.Busy == IDLE) &&
-			(BbpCsr.field.RegNum == Id))
-		{
-			*pValue = (UCHAR)BbpCsr.field.Value;
-			break;
-		}
-	}
-	if (BbpCsr.field.Busy == BUSY)
-	{
-		DBGPRINT_ERR(("BBP read R%d=0x%x fail\n", Id, BbpCsr.word));
-		*pValue = pAd->BbpWriteLatch[Id];
-		return STATUS_UNSUCCESSFUL;
-	}
-	return STATUS_SUCCESS;
-}
-#endif
-
-#if 1
-/*
-	========================================================================
-
-	Routine Description: Write 8-bit BBP register
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-NTSTATUS	RTUSBWriteBBPRegister(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			Id,
-	IN	UCHAR			Value)
-{
-	BBP_CSR_CFG_STRUC	BbpCsr;
-	UINT			i = 0;
-	NTSTATUS		status;
-	// Verify the busy condition
-	do
-	{
-		status = RTUSBReadMACRegister(pAd, BBP_CSR_CFG, &BbpCsr.word);
-		if (status >= 0)
-		{
-		if (!(BbpCsr.field.Busy == BUSY))
-			break;
-		}
-		printk("RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=%d!\n", i);
-		i++;
-	}
-	while ((i < RETRY_LIMIT) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)));
-
-	if ((i == RETRY_LIMIT) || (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
-	{
-		DBGPRINT_RAW(RT_DEBUG_ERROR, ("Retry count exhausted or device removed!!!\n"));
-		return STATUS_UNSUCCESSFUL;
-	}
-
-	// Prepare for write material
-	BbpCsr.word 				= 0;
-	BbpCsr.field.fRead			= 0;
-	BbpCsr.field.Value			= Value;
-	BbpCsr.field.Busy			= 1;
-	BbpCsr.field.RegNum 		= Id;
-	RTUSBWriteMACRegister(pAd, BBP_CSR_CFG, BbpCsr.word);
-
-	pAd->BbpWriteLatch[Id] = Value;
-
-	return STATUS_SUCCESS;
-}
-#else
-/*
-	========================================================================
-
-	Routine Description: Write 8-bit BBP register via firmware
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-
-NTSTATUS	RTUSBWriteBBPRegister(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			Id,
-	IN	UCHAR			Value)
-
-{
-	BBP_CSR_CFG_STRUC	BbpCsr;
-	int					BusyCnt;
-	for (BusyCnt=0; BusyCnt<MAX_BUSY_COUNT; BusyCnt++)
-	{
-		RTMP_IO_READ32(pAd, H2M_BBP_AGENT, &BbpCsr.word);
-		if (BbpCsr.field.Busy == BUSY)
-			continue;
-		BbpCsr.word = 0;
-		BbpCsr.field.fRead = 0;
-		BbpCsr.field.BBP_RW_MODE = 1;
-		BbpCsr.field.Busy = 1;
-		BbpCsr.field.Value = Value;
-		BbpCsr.field.RegNum = Id;
-		RTMP_IO_WRITE32(pAd, H2M_BBP_AGENT, BbpCsr.word);
-		AsicSendCommandToMcu(pAd, 0x80, 0xff, 0x0, 0x0);
-		pAd->BbpWriteLatch[Id] = Value;
-		break;
-	}
-	if (BusyCnt == MAX_BUSY_COUNT)
-	{
-		DBGPRINT_ERR(("BBP write R%d=0x%x fail\n", Id, BbpCsr.word));
-		return STATUS_UNSUCCESSFUL;
-	}
-	return STATUS_SUCCESS;
-}
-#endif
-/*
-	========================================================================
-
-	Routine Description: Write RF register through MAC
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-NTSTATUS	RTUSBWriteRFRegister(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UINT32			Value)
-{
-	PHY_CSR4_STRUC	PhyCsr4;
-	UINT			i = 0;
-	NTSTATUS		status;
-
-	NdisZeroMemory(&PhyCsr4, sizeof(PHY_CSR4_STRUC));
-	do
-	{
-		status = RTUSBReadMACRegister(pAd, RF_CSR_CFG0, &PhyCsr4.word);
-		if (status >= 0)
-		{
-		if (!(PhyCsr4.field.Busy))
-			break;
-		}
-		printk("RTUSBWriteRFRegister(RF_CSR_CFG0):retry count=%d!\n", i);
-		i++;
-	}
-	while ((i < RETRY_LIMIT) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)));
-
-	if ((i == RETRY_LIMIT) || (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
-	{
-		DBGPRINT_RAW(RT_DEBUG_ERROR, ("Retry count exhausted or device removed!!!\n"));
-		return STATUS_UNSUCCESSFUL;
-	}
-
-	RTUSBWriteMACRegister(pAd, RF_CSR_CFG0, Value);
-
-	return STATUS_SUCCESS;
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-NTSTATUS	RTUSBReadEEPROM(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT			Offset,
-	OUT	PUCHAR			pData,
-	IN	USHORT			length)
-{
-	NTSTATUS	Status = STATUS_SUCCESS;
-
-#ifdef RT30xx
-	if(pAd->bUseEfuse)
-	{
-		Status =eFuseRead(pAd, Offset, pData, length);
-	}
-	else
-#endif // RT30xx //
-	{
-	Status = RTUSB_VendorRequest(
-		pAd,
-		(USBD_TRANSFER_DIRECTION_IN | USBD_SHORT_TRANSFER_OK),
-		DEVICE_VENDOR_REQUEST_IN,
-		0x9,
-		0,
-		Offset,
-		pData,
-		length);
-	}
-
-	return Status;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-NTSTATUS	RTUSBWriteEEPROM(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT			Offset,
-	IN	PUCHAR			pData,
-	IN	USHORT			length)
-{
-	NTSTATUS	Status = STATUS_SUCCESS;
-
-#ifdef RT30xx
-	if(pAd->bUseEfuse)
-	{
-		Status = eFuseWrite(pAd, Offset, pData, length);
-	}
-	else
-#endif // RT30xx //
-	{
-	Status = RTUSB_VendorRequest(
-		pAd,
-		USBD_TRANSFER_DIRECTION_OUT,
-		DEVICE_VENDOR_REQUEST_OUT,
-		0x8,
-		0,
-		Offset,
-		pData,
-		length);
-	}
-
-	return Status;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-VOID RTUSBPutToSleep(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	UINT32		value;
-
-	// Timeout 0x40 x 50us
-	value = (SLEEPCID<<16)+(OWNERMCU<<24)+ (0x40<<8)+1;
-	RTUSBWriteMACRegister(pAd, 0x7010, value);
-	RTUSBWriteMACRegister(pAd, 0x404, 0x30);
-	//RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
-	DBGPRINT_RAW(RT_DEBUG_ERROR, ("Sleep Mailbox testvalue %x\n", value));
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-NTSTATUS RTUSBWakeUp(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	NTSTATUS	Status;
-
-	Status = RTUSB_VendorRequest(
-		pAd,
-		USBD_TRANSFER_DIRECTION_OUT,
-		DEVICE_VENDOR_REQUEST_OUT,
-		0x01,
-		0x09,
-		0,
-		NULL,
-		0);
-
-	return Status;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTUSBInitializeCmdQ(
-	IN	PCmdQ	cmdq)
-{
-	cmdq->head = NULL;
-	cmdq->tail = NULL;
-	cmdq->size = 0;
-	cmdq->CmdQState = RT2870_THREAD_INITED;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-NDIS_STATUS	RTUSBEnqueueCmdFromNdis(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	NDIS_OID		Oid,
-	IN	BOOLEAN			SetInformation,
-	IN	PVOID			pInformationBuffer,
-	IN	UINT32			InformationBufferLength)
-{
-	NDIS_STATUS	status;
-	PCmdQElmt	cmdqelmt = NULL;
-	POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;
-
-
-	if (pObj->RTUSBCmdThr_pid < 0)
-		return (NDIS_STATUS_RESOURCES);
-
-	status = RTMPAllocateMemory((PVOID *)&cmdqelmt, sizeof(CmdQElmt));
-	if ((status != NDIS_STATUS_SUCCESS) || (cmdqelmt == NULL))
-		return (NDIS_STATUS_RESOURCES);
-
-		cmdqelmt->buffer = NULL;
-		if (pInformationBuffer != NULL)
-		{
-			status = RTMPAllocateMemory((PVOID *)&cmdqelmt->buffer, InformationBufferLength);
-			if ((status != NDIS_STATUS_SUCCESS) || (cmdqelmt->buffer == NULL))
-			{
-				kfree(cmdqelmt);
-				return (NDIS_STATUS_RESOURCES);
-			}
-			else
-			{
-				NdisMoveMemory(cmdqelmt->buffer, pInformationBuffer, InformationBufferLength);
-				cmdqelmt->bufferlength = InformationBufferLength;
-			}
-		}
-		else
-			cmdqelmt->bufferlength = 0;
-
-	cmdqelmt->command = Oid;
-	cmdqelmt->CmdFromNdis = TRUE;
-	if (SetInformation == TRUE)
-		cmdqelmt->SetOperation = TRUE;
-	else
-		cmdqelmt->SetOperation = FALSE;
-
-	NdisAcquireSpinLock(&pAd->CmdQLock);
-	if (pAd->CmdQ.CmdQState & RT2870_THREAD_CAN_DO_INSERT)
-	{
-		EnqueueCmd((&pAd->CmdQ), cmdqelmt);
-		status = NDIS_STATUS_SUCCESS;
-	}
-	else
-	{
-		status = NDIS_STATUS_FAILURE;
-	}
-	NdisReleaseSpinLock(&pAd->CmdQLock);
-
-	if (status == NDIS_STATUS_FAILURE)
-	{
-		if (cmdqelmt->buffer)
-			NdisFreeMemory(cmdqelmt->buffer, cmdqelmt->bufferlength, 0);
-		NdisFreeMemory(cmdqelmt, sizeof(CmdQElmt), 0);
-	}
-	else
-	RTUSBCMDUp(pAd);
-
-
-    return(NDIS_STATUS_SUCCESS);
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-NDIS_STATUS RTUSBEnqueueInternalCmd(
-	IN PRTMP_ADAPTER	pAd,
-	IN NDIS_OID			Oid,
-	IN PVOID			pInformationBuffer,
-	IN UINT32			InformationBufferLength)
-{
-	NDIS_STATUS	status;
-	PCmdQElmt	cmdqelmt = NULL;
-
-
-	status = RTMPAllocateMemory((PVOID *)&cmdqelmt, sizeof(CmdQElmt));
-	if ((status != NDIS_STATUS_SUCCESS) || (cmdqelmt == NULL))
-		return (NDIS_STATUS_RESOURCES);
-	NdisZeroMemory(cmdqelmt, sizeof(CmdQElmt));
-
-	if(InformationBufferLength > 0)
-	{
-		status = RTMPAllocateMemory((PVOID *)&cmdqelmt->buffer, InformationBufferLength);
-		if ((status != NDIS_STATUS_SUCCESS) || (cmdqelmt->buffer == NULL))
-		{
-			NdisFreeMemory(cmdqelmt, sizeof(CmdQElmt), 0);
-			return (NDIS_STATUS_RESOURCES);
-		}
-		else
-		{
-			NdisMoveMemory(cmdqelmt->buffer, pInformationBuffer, InformationBufferLength);
-			cmdqelmt->bufferlength = InformationBufferLength;
-		}
-	}
-	else
-	{
-		cmdqelmt->buffer = NULL;
-		cmdqelmt->bufferlength = 0;
-	}
-
-	cmdqelmt->command = Oid;
-	cmdqelmt->CmdFromNdis = FALSE;
-
-	if (cmdqelmt != NULL)
-	{
-		NdisAcquireSpinLock(&pAd->CmdQLock);
-		if (pAd->CmdQ.CmdQState & RT2870_THREAD_CAN_DO_INSERT)
-		{
-			EnqueueCmd((&pAd->CmdQ), cmdqelmt);
-			status = NDIS_STATUS_SUCCESS;
-		}
-		else
-		{
-			status = NDIS_STATUS_FAILURE;
-		}
-		NdisReleaseSpinLock(&pAd->CmdQLock);
-
-		if (status == NDIS_STATUS_FAILURE)
-		{
-			if (cmdqelmt->buffer)
-				NdisFreeMemory(cmdqelmt->buffer, cmdqelmt->bufferlength, 0);
-			NdisFreeMemory(cmdqelmt, sizeof(CmdQElmt), 0);
-		}
-		else
-		RTUSBCMDUp(pAd);
-	}
-	return(NDIS_STATUS_SUCCESS);
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	IRQL =
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTUSBDequeueCmd(
-	IN	PCmdQ		cmdq,
-	OUT	PCmdQElmt	*pcmdqelmt)
-{
-	*pcmdqelmt = cmdq->head;
-
-	if (*pcmdqelmt != NULL)
-	{
-		cmdq->head = cmdq->head->next;
-		cmdq->size--;
-		if (cmdq->size == 0)
-			cmdq->tail = NULL;
-	}
-}
-
-/*
-    ========================================================================
-	  usb_control_msg - Builds a control urb, sends it off and waits for completion
-	  @dev: pointer to the usb device to send the message to
-	  @pipe: endpoint "pipe" to send the message to
-	  @request: USB message request value
-	  @requesttype: USB message request type value
-	  @value: USB message value
-	  @index: USB message index value
-	  @data: pointer to the data to send
-	  @size: length in bytes of the data to send
-	  @timeout: time in jiffies to wait for the message to complete before
-			  timing out (if 0 the wait is forever)
-	  Context: !in_interrupt ()
-
-	  This function sends a simple control message to a specified endpoint
-	  and waits for the message to complete, or timeout.
-	  If successful, it returns the number of bytes transferred, otherwise a negative error number.
-
-	 Don't use this function from within an interrupt context, like a
-	  bottom half handler.	If you need an asynchronous message, or need to send
-	  a message from within interrupt context, use usb_submit_urb()
-	  If a thread in your driver uses this call, make sure your disconnect()
-	  method can wait for it to complete.  Since you don't have a handle on
-	  the URB used, you can't cancel the request.
-
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-NTSTATUS    RTUSB_VendorRequest(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UINT32			TransferFlags,
-	IN	UCHAR			RequestType,
-	IN	UCHAR			Request,
-	IN	USHORT			Value,
-	IN	USHORT			Index,
-	IN	PVOID			TransferBuffer,
-	IN	UINT32			TransferBufferLength)
-{
-	int				ret;
-	POS_COOKIE		pObj = (POS_COOKIE) pAd->OS_Cookie;
-
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("device disconnected\n"));
-		return -1;
-	}
-	else if (in_interrupt())
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("in_interrupt, RTUSB_VendorRequest Request%02x Value%04x Offset%04x\n",Request,Value,Index));
-
-		return -1;
-	}
-	else
-	{
-#define MAX_RETRY_COUNT  10
-
-		int retryCount = 0;
-		void	*tmpBuf = TransferBuffer;
-
-		// Acquire Control token
-#ifdef INF_AMAZON_SE
-		ret = down_interruptible(&(pAd->UsbVendorReq_semaphore));
-		if (pAd->UsbVendorReqBuf)
-		{
-			ASSERT(TransferBufferLength <MAX_PARAM_BUFFER_SIZE);
-
-		   	tmpBuf = (void *)pAd->UsbVendorReqBuf;
-		   	NdisZeroMemory(pAd->UsbVendorReqBuf, TransferBufferLength);
-
-		   	if (RequestType == DEVICE_VENDOR_REQUEST_OUT)
-		   	 NdisMoveMemory(tmpBuf, TransferBuffer, TransferBufferLength);
-		}
-#endif // INF_AMAZON_SE //
-		do {
-		if( RequestType == DEVICE_VENDOR_REQUEST_OUT)
-			ret=usb_control_msg(pObj->pUsb_Dev, usb_sndctrlpipe( pObj->pUsb_Dev, 0 ), Request, RequestType, Value,Index, tmpBuf, TransferBufferLength, CONTROL_TIMEOUT_JIFFIES);
-		else if(RequestType == DEVICE_VENDOR_REQUEST_IN)
-			ret=usb_control_msg(pObj->pUsb_Dev, usb_rcvctrlpipe( pObj->pUsb_Dev, 0 ), Request, RequestType, Value,Index, tmpBuf, TransferBufferLength, CONTROL_TIMEOUT_JIFFIES);
-		else
-		{
-			DBGPRINT(RT_DEBUG_ERROR, ("vendor request direction is failed\n"));
-			ret = -1;
-		}
-
-			retryCount++;
-			if (ret < 0) {
-				printk("#\n");
-				RTMPusecDelay(5000);
-			}
-		} while((ret < 0) && (retryCount < MAX_RETRY_COUNT));
-
-#ifdef INF_AMAZON_SE
-	  	if ((pAd->UsbVendorReqBuf) && (RequestType == DEVICE_VENDOR_REQUEST_IN))
-			NdisMoveMemory(TransferBuffer, tmpBuf, TransferBufferLength);
-	  	up(&(pAd->UsbVendorReq_semaphore));
-#endif // INF_AMAZON_SE //
-
-        if (ret < 0) {
-//			DBGPRINT(RT_DEBUG_ERROR, ("USBVendorRequest failed ret=%d \n",ret));
-			DBGPRINT(RT_DEBUG_ERROR, ("RTUSB_VendorRequest failed(%d),TxFlags=0x%x, ReqType=%s, Req=0x%x, Index=0x%x\n",
-						ret, TransferFlags, (RequestType == DEVICE_VENDOR_REQUEST_OUT ? "OUT" : "IN"), Request, Index));
-			if (Request == 0x2)
-				DBGPRINT(RT_DEBUG_ERROR, ("\tRequest Value=0x%04x!\n", Value));
-
-			if ((TransferBuffer!= NULL) && (TransferBufferLength > 0))
-				hex_dump("Failed TransferBuffer value", TransferBuffer, TransferBufferLength);
-        }
-	}
-	return ret;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-	  Creates an IRP to submite an IOCTL_INTERNAL_USB_RESET_PORT
-	  synchronously. Callers of this function must be running at
-	  PASSIVE LEVEL.
-
-	Arguments:
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-NTSTATUS	RTUSB_ResetDevice(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	NTSTATUS		Status = TRUE;
-
-	DBGPRINT_RAW(RT_DEBUG_TRACE, ("--->USB_ResetDevice\n"));
-	//RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS);
-	return Status;
-}
-
-VOID CMDHandler(
-    IN PRTMP_ADAPTER pAd)
-{
-	PCmdQElmt		cmdqelmt;
-	PUCHAR			pData;
-	NDIS_STATUS		NdisStatus = NDIS_STATUS_SUCCESS;
-//	ULONG			Now = 0;
-	NTSTATUS		ntStatus;
-//	unsigned long	IrqFlags;
-
-	while (pAd->CmdQ.size > 0)
-	{
-		NdisStatus = NDIS_STATUS_SUCCESS;
-
-		NdisAcquireSpinLock(&pAd->CmdQLock);
-		RTUSBDequeueCmd(&pAd->CmdQ, &cmdqelmt);
-		NdisReleaseSpinLock(&pAd->CmdQLock);
-
-		if (cmdqelmt == NULL)
-			break;
-
-		pData = cmdqelmt->buffer;
-
-		if(!(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST) || RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)))
-		{
-			switch (cmdqelmt->command)
-			{
-				case CMDTHREAD_CHECK_GPIO:
-					{
-#ifdef CONFIG_STA_SUPPORT
-						UINT32 data;
-#endif // CONFIG_STA_SUPPORT //
-#ifdef RALINK_ATE
-       					if(ATE_ON(pAd))
-						{
-							DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-							break;
-						}
-#endif // RALINK_ATE //
-
-#ifdef CONFIG_STA_SUPPORT
-
-
-						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-						{
-							// Read GPIO pin2 as Hardware controlled radio state
-
-							RTUSBReadMACRegister( pAd, GPIO_CTRL_CFG, &data);
-
-							if (data & 0x04)
-							{
-								pAd->StaCfg.bHwRadio = TRUE;
-							}
-							else
-							{
-								pAd->StaCfg.bHwRadio = FALSE;
-							}
-
-							if(pAd->StaCfg.bRadio != (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio))
-							{
-								pAd->StaCfg.bRadio = (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio);
-								if(pAd->StaCfg.bRadio == TRUE)
-								{
-									DBGPRINT_RAW(RT_DEBUG_ERROR, ("!!! Radio On !!!\n"));
-
-									MlmeRadioOn(pAd);
-									// Update extra information
-									pAd->ExtraInfo = EXTRA_INFO_CLEAR;
-								}
-								else
-								{
-									DBGPRINT_RAW(RT_DEBUG_ERROR, ("!!! Radio Off !!!\n"));
-
-									MlmeRadioOff(pAd);
-									// Update extra information
-									pAd->ExtraInfo = HW_RADIO_OFF;
-								}
-							}
-						}
-#endif // CONFIG_STA_SUPPORT //
-					}
-					break;
-
-#ifdef CONFIG_STA_SUPPORT
-				case CMDTHREAD_QKERIODIC_EXECUT:
-					{
-						StaQuickResponeForRateUpExec(NULL, pAd, NULL, NULL);
-					}
-					break;
-#endif // CONFIG_STA_SUPPORT //
-
-				case CMDTHREAD_RESET_BULK_OUT:
-					{
-						UINT32		MACValue;
-						UCHAR		Index;
-						int			ret=0;
-						PHT_TX_CONTEXT	pHTTXContext;
-//						RTMP_TX_RING *pTxRing;
-						unsigned long IrqFlags;
-#ifdef RALINK_ATE
-						PTX_CONTEXT		pNullContext = &(pAd->NullContext);
-#endif // RALINK_ATE //
-						DBGPRINT_RAW(RT_DEBUG_TRACE, ("CmdThread : CMDTHREAD_RESET_BULK_OUT(ResetPipeid=0x%0x)===>\n", pAd->bulkResetPipeid));
-						// All transfers must be aborted or cancelled before attempting to reset the pipe.
-						//RTUSBCancelPendingBulkOutIRP(pAd);
-						// Wait 10ms to let previous packet that are already in HW FIFO to clear. by MAXLEE 12-25-2007
-						Index = 0;
-						do
-						{
-							RTUSBReadMACRegister(pAd, TXRXQ_PCNT, &MACValue);
-							if ((MACValue & 0xf00000/*0x800000*/) == 0)
-								break;
-							Index++;
-							RTMPusecDelay(10000);
-						}while(Index < 100);
-						MACValue = 0;
-						RTUSBReadMACRegister(pAd, USB_DMA_CFG, &MACValue);
-						// To prevent Read Register error, we 2nd check the validity.
-						if ((MACValue & 0xc00000) == 0)
-							RTUSBReadMACRegister(pAd, USB_DMA_CFG, &MACValue);
-						// To prevent Read Register error, we 3rd check the validity.
-						if ((MACValue & 0xc00000) == 0)
-							RTUSBReadMACRegister(pAd, USB_DMA_CFG, &MACValue);
-						MACValue |= 0x80000;
-						RTUSBWriteMACRegister(pAd, USB_DMA_CFG, MACValue);
-
-						// Wait 1ms to prevent next URB to bulkout before HW reset. by MAXLEE 12-25-2007
-						RTMPusecDelay(1000);
-
-						MACValue &= (~0x80000);
-						RTUSBWriteMACRegister(pAd, USB_DMA_CFG, MACValue);
-						DBGPRINT_RAW(RT_DEBUG_TRACE, ("\tSet 0x2a0 bit19. Clear USB DMA TX path\n"));
-
-						// Wait 5ms to prevent next URB to bulkout before HW reset. by MAXLEE 12-25-2007
-						//RTMPusecDelay(5000);
-
-						if ((pAd->bulkResetPipeid & BULKOUT_MGMT_RESET_FLAG) == BULKOUT_MGMT_RESET_FLAG)
-						{
-							RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET);
-							if (pAd->MgmtRing.TxSwFreeIdx < MGMT_RING_SIZE /* pMLMEContext->bWaitingBulkOut == TRUE */)
-							{
-								RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_MLME);
-							}
-							RTUSBKickBulkOut(pAd);
-
-							DBGPRINT_RAW(RT_DEBUG_TRACE, ("\tTX MGMT RECOVER Done!\n"));
-						}
-						else
-						{
-							pHTTXContext = &(pAd->TxContext[pAd->bulkResetPipeid]);
-							//NdisAcquireSpinLock(&pAd->BulkOutLock[pAd->bulkResetPipeid]);
-							RTMP_INT_LOCK(&pAd->BulkOutLock[pAd->bulkResetPipeid], IrqFlags);
-							if ( pAd->BulkOutPending[pAd->bulkResetPipeid] == FALSE)
-							{
-								pAd->BulkOutPending[pAd->bulkResetPipeid] = TRUE;
-								pHTTXContext->IRPPending = TRUE;
-								pAd->watchDogTxPendingCnt[pAd->bulkResetPipeid] = 1;
-
-								// no matter what, clean the flag
-								RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET);
-
-								//NdisReleaseSpinLock(&pAd->BulkOutLock[pAd->bulkResetPipeid]);
-								RTMP_INT_UNLOCK(&pAd->BulkOutLock[pAd->bulkResetPipeid], IrqFlags);
-/*-----------------------------------------------------------------------------------------------*/
-#ifdef RALINK_ATE
-								if(ATE_ON(pAd))
-							    {
-									pNullContext->IRPPending = TRUE;
-									//
-									// If driver is still in ATE TXFRAME mode,
-									// keep on transmitting ATE frames.
-									//
-									DBGPRINT_RAW(RT_DEBUG_TRACE, ("pAd->ate.Mode == %d\npAd->ContinBulkOut == %d\npAd->BulkOutRemained == %d\n", pAd->ate.Mode, pAd->ContinBulkOut, atomic_read(&pAd->BulkOutRemained)));
-									if((pAd->ate.Mode == ATE_TXFRAME) && ((pAd->ContinBulkOut == TRUE) || (atomic_read(&pAd->BulkOutRemained) > 0)))
-								    {
-										DBGPRINT_RAW(RT_DEBUG_TRACE, ("After CMDTHREAD_RESET_BULK_OUT, continue to bulk out frames !\n"));
-
-										// Init Tx context descriptor
-										RTUSBInitTxDesc(pAd, pNullContext, 0/* pAd->bulkResetPipeid */, (usb_complete_t)ATE_RTUSBBulkOutDataPacketComplete);
-
-										if((ret = RTUSB_SUBMIT_URB(pNullContext->pUrb))!=0)
-										{
-											DBGPRINT(RT_DEBUG_ERROR, ("ATE_RTUSBBulkOutDataPacket: Submit Tx URB failed %d\n", ret));
-										}
-
-										pAd->BulkOutReq++;
-									}
-								}
-								else
-#endif // RALINK_ATE //
-/*-----------------------------------------------------------------------------------------------*/
-								{
-								RTUSBInitHTTxDesc(pAd, pHTTXContext, pAd->bulkResetPipeid, pHTTXContext->BulkOutSize, (usb_complete_t)RTUSBBulkOutDataPacketComplete);
-
-								if((ret = RTUSB_SUBMIT_URB(pHTTXContext->pUrb))!=0)
-								{
-										RTMP_INT_LOCK(&pAd->BulkOutLock[pAd->bulkResetPipeid], IrqFlags);
-									pAd->BulkOutPending[pAd->bulkResetPipeid] = FALSE;
-									pHTTXContext->IRPPending = FALSE;
-										pAd->watchDogTxPendingCnt[pAd->bulkResetPipeid] = 0;
-										RTMP_INT_UNLOCK(&pAd->BulkOutLock[pAd->bulkResetPipeid], IrqFlags);
-
-										DBGPRINT(RT_DEBUG_ERROR, ("CmdThread : CMDTHREAD_RESET_BULK_OUT: Submit Tx URB failed %d\n", ret));
-								}
-									else
-									{
-										RTMP_IRQ_LOCK(&pAd->BulkOutLock[pAd->bulkResetPipeid], IrqFlags);
-										DBGPRINT_RAW(RT_DEBUG_TRACE,("\tCMDTHREAD_RESET_BULK_OUT: TxContext[%d]:CWPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d, pending=%d!\n",
-												pAd->bulkResetPipeid, pHTTXContext->CurWritePosition, pHTTXContext->NextBulkOutPosition,
-															pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad, pAd->BulkOutPending[pAd->bulkResetPipeid]));
-										DBGPRINT_RAW(RT_DEBUG_TRACE,("\t\tBulkOut Req=0x%lx, Complete=0x%lx, Other=0x%lx\n",
-															pAd->BulkOutReq, pAd->BulkOutComplete, pAd->BulkOutCompleteOther));
-										RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[pAd->bulkResetPipeid], IrqFlags);
-										DBGPRINT_RAW(RT_DEBUG_TRACE, ("\tCMDTHREAD_RESET_BULK_OUT: Submit Tx DATA URB for failed BulkReq(0x%lx) Done, status=%d!\n", pAd->bulkResetReq[pAd->bulkResetPipeid], pHTTXContext->pUrb->status));
-
-									}
-								}
-							}
-							else
-							{
-								//NdisReleaseSpinLock(&pAd->BulkOutLock[pAd->bulkResetPipeid]);
-								//RTMP_INT_UNLOCK(&pAd->BulkOutLock[pAd->bulkResetPipeid], IrqFlags);
-
-								DBGPRINT_RAW(RT_DEBUG_ERROR, ("CmdThread : TX DATA RECOVER FAIL for BulkReq(0x%lx) because BulkOutPending[%d] is TRUE!\n", pAd->bulkResetReq[pAd->bulkResetPipeid], pAd->bulkResetPipeid));
-								if (pAd->bulkResetPipeid == 0)
-								{
-									UCHAR	pendingContext = 0;
-									PHT_TX_CONTEXT pHTTXContext = (PHT_TX_CONTEXT)(&pAd->TxContext[pAd->bulkResetPipeid ]);
-									PTX_CONTEXT pMLMEContext = (PTX_CONTEXT)(pAd->MgmtRing.Cell[pAd->MgmtRing.TxDmaIdx].AllocVa);
-									PTX_CONTEXT pNULLContext = (PTX_CONTEXT)(&pAd->PsPollContext);
-									PTX_CONTEXT pPsPollContext = (PTX_CONTEXT)(&pAd->NullContext);
-
-									if (pHTTXContext->IRPPending)
-										pendingContext |= 1;
-									else if (pMLMEContext->IRPPending)
-										pendingContext |= 2;
-									else if (pNULLContext->IRPPending)
-										pendingContext |= 4;
-									else if (pPsPollContext->IRPPending)
-										pendingContext |= 8;
-									else
-										pendingContext = 0;
-
-									DBGPRINT_RAW(RT_DEBUG_ERROR, ("\tTX Occupied by %d!\n", pendingContext));
-								}
-
-							// no matter what, clean the flag
-							RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET);
-
-								RTMP_INT_UNLOCK(&pAd->BulkOutLock[pAd->bulkResetPipeid], IrqFlags);
-
-								RTUSB_SET_BULK_FLAG(pAd, (fRTUSB_BULK_OUT_DATA_NORMAL << pAd->bulkResetPipeid));
-							}
-
-							RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS);
-							//RTUSBKickBulkOut(pAd);
-						}
-
-					}
-					/*
-						// Don't cancel BULKIN.
-						while ((atomic_read(&pAd->PendingRx) > 0) &&
-								(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
-						{
-							if (atomic_read(&pAd->PendingRx) > 0)
-							{
-								DBGPRINT_RAW(RT_DEBUG_ERROR, ("BulkIn IRP Pending!!cancel it!\n"));
-								RTUSBCancelPendingBulkInIRP(pAd);
-							}
-							RTMPusecDelay(100000);
-						}
-
-						if ((atomic_read(&pAd->PendingRx) == 0) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)))
-						{
-							UCHAR	i;
-							RTUSBRxPacket(pAd);
-							pAd->NextRxBulkInReadIndex = 0;	// Next Rx Read index
-							pAd->NextRxBulkInIndex		= 0;	// Rx Bulk pointer
-							for (i = 0; i < (RX_RING_SIZE); i++)
-							{
-								PRX_CONTEXT  pRxContext = &(pAd->RxContext[i]);
-
-								pRxContext->pAd	= pAd;
-								pRxContext->InUse		= FALSE;
-								pRxContext->IRPPending	= FALSE;
-								pRxContext->Readable	= FALSE;
-								pRxContext->ReorderInUse = FALSE;
-
-							}
-							RTUSBBulkReceive(pAd);
-							DBGPRINT_RAW(RT_DEBUG_ERROR, ("RTUSBBulkReceive\n"));
-						}*/
-					DBGPRINT_RAW(RT_DEBUG_TRACE, ("CmdThread : CMDTHREAD_RESET_BULK_OUT<===\n"));
-    	   			break;
-
-				case CMDTHREAD_RESET_BULK_IN:
-					DBGPRINT_RAW(RT_DEBUG_TRACE, ("CmdThread : CMDTHREAD_RESET_BULK_IN === >\n"));
-
-					// All transfers must be aborted or cancelled before attempting to reset the pipe.
-					{
-						UINT32		MACValue;
-/*-----------------------------------------------------------------------------------------------*/
-#ifdef RALINK_ATE
-						if (ATE_ON(pAd))
-						{
-							if((pAd->PendingRx > 0) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
-							{
-								DBGPRINT_RAW(RT_DEBUG_ERROR, ("ATE : BulkIn IRP Pending!!!\n"));
-								ATE_RTUSBCancelPendingBulkInIRP(pAd);
-								RTMPusecDelay(100000);
-								pAd->PendingRx = 0;
-							}
-						}
-						else
-#endif // RALINK_ATE //
-/*-----------------------------------------------------------------------------------------------*/
-						{
-						//while ((atomic_read(&pAd->PendingRx) > 0) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
-						if((pAd->PendingRx > 0) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
-						{
-							DBGPRINT_RAW(RT_DEBUG_ERROR, ("BulkIn IRP Pending!!!\n"));
-							RTUSBCancelPendingBulkInIRP(pAd);
-							RTMPusecDelay(100000);
-							pAd->PendingRx = 0;
-						}
-						}
-
-						// Wait 10ms before reading register.
-						RTMPusecDelay(10000);
-						ntStatus = RTUSBReadMACRegister(pAd, MAC_CSR0, &MACValue);
-
-						if ((NT_SUCCESS(ntStatus) == TRUE) &&
-							(!(RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS | fRTMP_ADAPTER_RADIO_OFF |
-													fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)))))
-						{
-							UCHAR	i;
-
-							if (RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS | fRTMP_ADAPTER_RADIO_OFF |
-														fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)))
-								break;
-							pAd->NextRxBulkInPosition = pAd->RxContext[pAd->NextRxBulkInIndex].BulkInOffset;
-							DBGPRINT(RT_DEBUG_TRACE, ("BULK_IN_RESET: NBIIdx=0x%x,NBIRIdx=0x%x, BIRPos=0x%lx. BIReq=x%lx, BIComplete=0x%lx, BICFail0x%lx\n",
-									pAd->NextRxBulkInIndex,  pAd->NextRxBulkInReadIndex, pAd->NextRxBulkInPosition, pAd->BulkInReq, pAd->BulkInComplete, pAd->BulkInCompleteFail));
-							for (i = 0; i < RX_RING_SIZE; i++)
-							{
- 								DBGPRINT(RT_DEBUG_TRACE, ("\tRxContext[%d]: IRPPending=%d, InUse=%d, Readable=%d!\n"
-									, i, pAd->RxContext[i].IRPPending, pAd->RxContext[i].InUse, pAd->RxContext[i].Readable));
-							}
- 							/*
-
-							DBGPRINT_RAW(RT_DEBUG_ERROR, ("==========================================\n"));
-
-							pAd->NextRxBulkInReadIndex = 0;	// Next Rx Read index
-							pAd->NextRxBulkInIndex		= 0;	// Rx Bulk pointer
-							for (i = 0; i < (RX_RING_SIZE); i++)
-							{
-								PRX_CONTEXT  pRxContext = &(pAd->RxContext[i]);
-
-								pRxContext->pAd	= pAd;
-								pRxContext->InUse		= FALSE;
-								pRxContext->IRPPending	= FALSE;
-								pRxContext->Readable	= FALSE;
-								pRxContext->ReorderInUse = FALSE;
-
-							}*/
-							RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BULKIN_RESET);
-							for (i = 0; i < pAd->CommonCfg.NumOfBulkInIRP; i++)
-							{
-								//RTUSBBulkReceive(pAd);
-								PRX_CONTEXT		pRxContext;
-								PURB			pUrb;
-								int				ret = 0;
-								unsigned long	IrqFlags;
-
-
-								RTMP_IRQ_LOCK(&pAd->BulkInLock, IrqFlags);
-								pRxContext = &(pAd->RxContext[pAd->NextRxBulkInIndex]);
-								if ((pAd->PendingRx > 0) || (pRxContext->Readable == TRUE) || (pRxContext->InUse == TRUE))
-								{
-									RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
-									break;
-								}
-								pRxContext->InUse = TRUE;
-								pRxContext->IRPPending = TRUE;
-								pAd->PendingRx++;
-								pAd->BulkInReq++;
-								RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
-
-								// Init Rx context descriptor
-								RTUSBInitRxDesc(pAd, pRxContext);
-								pUrb = pRxContext->pUrb;
-								if ((ret = RTUSB_SUBMIT_URB(pUrb))!=0)
-								{	// fail
-
-									RTMP_IRQ_LOCK(&pAd->BulkInLock, IrqFlags);
-									pRxContext->InUse = FALSE;
-									pRxContext->IRPPending = FALSE;
-									pAd->PendingRx--;
-									pAd->BulkInReq--;
-									RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
-									DBGPRINT(RT_DEBUG_ERROR, ("CMDTHREAD_RESET_BULK_IN: Submit Rx URB failed(%d), status=%d\n", ret, pUrb->status));
-								}
-								else
-								{	// success
-									DBGPRINT_RAW(RT_DEBUG_TRACE, ("CMDTHREAD_RESET_BULK_IN: Submit Rx URB Done, status=%d!\n", pUrb->status));
-									ASSERT((pRxContext->InUse == pRxContext->IRPPending));
-								}
-							}
-
-						}
-						else
-						{
-							// Card must be removed
-							if (NT_SUCCESS(ntStatus) != TRUE)
-							{
-							RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST);
-								DBGPRINT_RAW(RT_DEBUG_ERROR, ("CMDTHREAD_RESET_BULK_IN: Read Register Failed!Card must be removed!!\n\n"));
-							}
-							else
-							{
-								DBGPRINT_RAW(RT_DEBUG_ERROR, ("CMDTHREAD_RESET_BULK_IN: Cannot do bulk in because flags(0x%lx) on !\n", pAd->Flags));
-						}
-					}
-					}
-					DBGPRINT_RAW(RT_DEBUG_TRACE, ("CmdThread : CMDTHREAD_RESET_BULK_IN <===\n"));
-					break;
-
-				case CMDTHREAD_SET_ASIC_WCID:
-					{
-						RT_SET_ASIC_WCID	SetAsicWcid;
-						USHORT		offset;
-						UINT32		MACValue, MACRValue = 0;
-						SetAsicWcid = *((PRT_SET_ASIC_WCID)(pData));
-
-						if (SetAsicWcid.WCID >= MAX_LEN_OF_MAC_TABLE)
-							return;
-
-						offset = MAC_WCID_BASE + ((UCHAR)SetAsicWcid.WCID)*HW_WCID_ENTRY_SIZE;
-
-						DBGPRINT_RAW(RT_DEBUG_TRACE, ("CmdThread : CMDTHREAD_SET_ASIC_WCID : WCID = %ld, SetTid  = %lx, DeleteTid = %lx.\n", SetAsicWcid.WCID, SetAsicWcid.SetTid, SetAsicWcid.DeleteTid));
-						MACValue = (pAd->MacTab.Content[SetAsicWcid.WCID].Addr[3]<<24)+(pAd->MacTab.Content[SetAsicWcid.WCID].Addr[2]<<16)+(pAd->MacTab.Content[SetAsicWcid.WCID].Addr[1]<<8)+(pAd->MacTab.Content[SetAsicWcid.WCID].Addr[0]);
-						DBGPRINT_RAW(RT_DEBUG_TRACE, ("1-MACValue= %x,\n", MACValue));
-						RTUSBWriteMACRegister(pAd, offset, MACValue);
-						// Read bitmask
-						RTUSBReadMACRegister(pAd, offset+4, &MACRValue);
-						if ( SetAsicWcid.DeleteTid != 0xffffffff)
-							MACRValue &= (~SetAsicWcid.DeleteTid);
-						if (SetAsicWcid.SetTid != 0xffffffff)
-							MACRValue |= (SetAsicWcid.SetTid);
-						MACRValue &= 0xffff0000;
-
-						MACValue = (pAd->MacTab.Content[SetAsicWcid.WCID].Addr[5]<<8)+pAd->MacTab.Content[SetAsicWcid.WCID].Addr[4];
-						MACValue |= MACRValue;
-						RTUSBWriteMACRegister(pAd, offset+4, MACValue);
-
-						DBGPRINT_RAW(RT_DEBUG_TRACE, ("2-MACValue= %x,\n", MACValue));
-					}
-					break;
-
-				case CMDTHREAD_SET_ASIC_WCID_CIPHER:
-					{
-#ifdef CONFIG_STA_SUPPORT
-						RT_SET_ASIC_WCID_ATTRI	SetAsicWcidAttri;
-						USHORT		offset;
-						UINT32		MACRValue = 0;
-						SHAREDKEY_MODE_STRUC csr1;
-						SetAsicWcidAttri = *((PRT_SET_ASIC_WCID_ATTRI)(pData));
-
-						if (SetAsicWcidAttri.WCID >= MAX_LEN_OF_MAC_TABLE)
-							return;
-
-						offset = MAC_WCID_ATTRIBUTE_BASE + ((UCHAR)SetAsicWcidAttri.WCID)*HW_WCID_ATTRI_SIZE;
-
-						DBGPRINT_RAW(RT_DEBUG_TRACE, ("Cmd : CMDTHREAD_SET_ASIC_WCID_CIPHER : WCID = %ld, Cipher = %lx.\n", SetAsicWcidAttri.WCID, SetAsicWcidAttri.Cipher));
-						// Read bitmask
-						RTUSBReadMACRegister(pAd, offset, &MACRValue);
-						MACRValue = 0;
-						MACRValue |= (((UCHAR)SetAsicWcidAttri.Cipher) << 1);
-
-						RTUSBWriteMACRegister(pAd, offset, MACRValue);
-						DBGPRINT_RAW(RT_DEBUG_TRACE, ("2-offset = %x , MACValue= %x,\n", offset, MACRValue));
-
-						offset = PAIRWISE_IVEIV_TABLE_BASE + ((UCHAR)SetAsicWcidAttri.WCID)*HW_IVEIV_ENTRY_SIZE;
-						MACRValue = 0;
-						if ( (SetAsicWcidAttri.Cipher <= CIPHER_WEP128))
-							MACRValue |= ( pAd->StaCfg.DefaultKeyId << 30);
-						else
-							MACRValue |= (0x20000000);
-						RTUSBWriteMACRegister(pAd, offset, MACRValue);
-						DBGPRINT_RAW(RT_DEBUG_TRACE, ("2-offset = %x , MACValue= %x,\n", offset, MACRValue));
-
-						//
-						// Update cipher algorithm. WSTA always use BSS0
-						//
-						// for adhoc mode only ,because wep status slow than add key, when use zero config
-						if (pAd->StaCfg.BssType == BSS_ADHOC )
-						{
-							offset = MAC_WCID_ATTRIBUTE_BASE;
-
-							RTUSBReadMACRegister(pAd, offset, &MACRValue);
-							MACRValue &= (~0xe);
-							MACRValue |= (((UCHAR)SetAsicWcidAttri.Cipher) << 1);
-
-							RTUSBWriteMACRegister(pAd, offset, MACRValue);
-
-							//Update group key cipher,,because wep status slow than add key, when use zero config
-							RTUSBReadMACRegister(pAd, SHARED_KEY_MODE_BASE+4*(0/2), &csr1.word);
-
-							csr1.field.Bss0Key0CipherAlg = SetAsicWcidAttri.Cipher;
-							csr1.field.Bss0Key1CipherAlg = SetAsicWcidAttri.Cipher;
-
-							RTUSBWriteMACRegister(pAd, SHARED_KEY_MODE_BASE+4*(0/2), csr1.word);
-						}
-#endif // CONFIG_STA_SUPPORT //
-					}
-					break;
-
-//Benson modified for USB interface, avoid in interrupt when write key, 20080724 -->
-				case RT_CMD_SET_KEY_TABLE: //General call for AsicAddPairwiseKeyEntry()
-				{
-					RT_ADD_PAIRWISE_KEY_ENTRY KeyInfo;
-					KeyInfo = *((PRT_ADD_PAIRWISE_KEY_ENTRY)(pData));
-					AsicAddPairwiseKeyEntry(pAd,
-											KeyInfo.MacAddr,
-											(UCHAR)KeyInfo.MacTabMatchWCID,
-											&KeyInfo.CipherKey);
-				}
-					break;
-				case RT_CMD_SET_RX_WCID_TABLE: //General call for RTMPAddWcidAttributeEntry()
-				{
-					PMAC_TABLE_ENTRY pEntry;
-					UCHAR KeyIdx;
-					UCHAR CipherAlg;
-					UCHAR ApIdx;
-
-					pEntry = (PMAC_TABLE_ENTRY)(pData);
-
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-					KeyIdx = 0;
-					CipherAlg = pEntry->PairwiseKey.CipherAlg;
-					ApIdx = BSS0;
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
-
-						RTMPAddWcidAttributeEntry(
-										  pAd,
-										  ApIdx,
-										  KeyIdx,
-										  CipherAlg,
-										  pEntry);
-					}
-						break;
-//Benson modified for USB interface, avoid in interrupt when write key, 20080724 <--
-
-				case CMDTHREAD_SET_CLIENT_MAC_ENTRY:
-					{
-						MAC_TABLE_ENTRY *pEntry;
-						pEntry = (MAC_TABLE_ENTRY *)pData;
-
-
-#ifdef CONFIG_STA_SUPPORT
-						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-						{
-							AsicRemovePairwiseKeyEntry(pAd, pEntry->apidx, (UCHAR)pEntry->Aid);
-							if ((pEntry->AuthMode <= Ndis802_11AuthModeAutoSwitch) && (pEntry->WepStatus == Ndis802_11Encryption1Enabled))
-							{
-								UINT32 uIV = 0;
-								PUCHAR  ptr;
-
-								ptr = (PUCHAR) &uIV;
-								*(ptr + 3) = (pAd->StaCfg.DefaultKeyId << 6);
-								AsicUpdateWCIDIVEIV(pAd, pEntry->Aid, uIV, 0);
-								AsicUpdateWCIDAttribute(pAd, pEntry->Aid, BSS0, pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg, FALSE);
-							}
-							else if (pEntry->AuthMode == Ndis802_11AuthModeWPANone)
-							{
-								UINT32 uIV = 0;
-								PUCHAR  ptr;
-
-								ptr = (PUCHAR) &uIV;
-								*(ptr + 3) = (pAd->StaCfg.DefaultKeyId << 6);
-								AsicUpdateWCIDIVEIV(pAd, pEntry->Aid, uIV, 0);
-								AsicUpdateWCIDAttribute(pAd, pEntry->Aid, BSS0, pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg, FALSE);
-							}
-							else
-							{
-								//
-								// Other case, disable engine.
-								// Don't worry WPA key, we will add WPA Key after 4-Way handshaking.
-								//
-								USHORT   offset;
-								offset = MAC_WCID_ATTRIBUTE_BASE + (pEntry->Aid * HW_WCID_ATTRI_SIZE);
-								// RX_PKEY_MODE:0 for no security; RX_KEY_TAB:0 for shared key table; BSS_IDX:0
-								RTUSBWriteMACRegister(pAd, offset, 0);
-							}
-						}
-#endif // CONFIG_STA_SUPPORT //
-
-						AsicUpdateRxWCIDTable(pAd, pEntry->Aid, pEntry->Addr);
-						printk("UpdateRxWCIDTable(): Aid=%d, Addr=%02x:%02x:%02x:%02x:%02x:%02x!\n", pEntry->Aid,
-								pEntry->Addr[0], pEntry->Addr[1], pEntry->Addr[2], pEntry->Addr[3], pEntry->Addr[4], pEntry->Addr[5]);
-					}
-					break;
-
-// add by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet
-				case CMDTHREAD_UPDATE_PROTECT:
-					{
-						AsicUpdateProtect(pAd, 0, (ALLN_SETPROTECT), TRUE, 0);
-					}
-					break;
-// end johnli
-
-				case OID_802_11_ADD_WEP:
-					{
-#ifdef CONFIG_STA_SUPPORT
-						UINT	i;
-						UINT32	KeyIdx;
-						PNDIS_802_11_WEP	pWepKey;
-
-						DBGPRINT(RT_DEBUG_TRACE, ("CmdThread::OID_802_11_ADD_WEP  \n"));
-
-						pWepKey = (PNDIS_802_11_WEP)pData;
-						KeyIdx = pWepKey->KeyIndex & 0x0fffffff;
-
-						// it is a shared key
-						if ((KeyIdx >= 4) || ((pWepKey->KeyLength != 5) && (pWepKey->KeyLength != 13)))
-						{
-							NdisStatus = NDIS_STATUS_INVALID_DATA;
-							DBGPRINT(RT_DEBUG_ERROR, ("CmdThread::OID_802_11_ADD_WEP, INVALID_DATA!!\n"));
-						}
-						else
-						{
-							UCHAR CipherAlg;
-							pAd->SharedKey[BSS0][KeyIdx].KeyLen = (UCHAR) pWepKey->KeyLength;
-							NdisMoveMemory(pAd->SharedKey[BSS0][KeyIdx].Key, &pWepKey->KeyMaterial, pWepKey->KeyLength);
-							CipherAlg = (pAd->SharedKey[BSS0][KeyIdx].KeyLen == 5)? CIPHER_WEP64 : CIPHER_WEP128;
-
-							//
-							// Change the WEP cipher to CKIP cipher if CKIP KP on.
-							// Funk UI or Meetinghouse UI will add ckip key from this path.
-							//
-
-							if (pAd->OpMode == OPMODE_STA)
-						 	{
-								pAd->MacTab.Content[BSSID_WCID].PairwiseKey.CipherAlg = pAd->SharedKey[BSS0][KeyIdx].CipherAlg;
-								pAd->MacTab.Content[BSSID_WCID].PairwiseKey.KeyLen = pAd->SharedKey[BSS0][KeyIdx].KeyLen;
-						 	}
-							pAd->SharedKey[BSS0][KeyIdx].CipherAlg = CipherAlg;
-							if (pWepKey->KeyIndex & 0x80000000)
-							{
-								// Default key for tx (shared key)
-								UCHAR	IVEIV[8];
-								UINT32	WCIDAttri, Value;
-								USHORT	offset, offset2;
-								NdisZeroMemory(IVEIV, 8);
-								pAd->StaCfg.DefaultKeyId = (UCHAR) KeyIdx;
-								// Add BSSID to WCTable. because this is Tx wep key.
-								// WCID Attribute UDF:3, BSSIdx:3, Alg:3, Keytable:1=PAIRWISE KEY, BSSIdx is 0
-								WCIDAttri = (CipherAlg<<1)|SHAREDKEYTABLE;
-
-								offset = MAC_WCID_ATTRIBUTE_BASE + (BSSID_WCID* HW_WCID_ATTRI_SIZE);
-								RTUSBWriteMACRegister(pAd, offset, WCIDAttri);
-								// 1. IV/EIV
-								// Specify key index to find shared key.
-								IVEIV[3] = (UCHAR)(KeyIdx<< 6);	//WEP Eiv bit off. groupkey index is not 0
-								offset = PAIRWISE_IVEIV_TABLE_BASE + (BSS0Mcast_WCID * HW_IVEIV_ENTRY_SIZE);
-								offset2 = PAIRWISE_IVEIV_TABLE_BASE + (BSSID_WCID* HW_IVEIV_ENTRY_SIZE);
-								for (i=0; i<8;)
-								{
-									Value = IVEIV[i];
-									Value += (IVEIV[i+1]<<8);
-									Value += (IVEIV[i+2]<<16);
-									Value += (IVEIV[i+3]<<24);
-									RTUSBWriteMACRegister(pAd, offset+i, Value);
-									RTUSBWriteMACRegister(pAd, offset2+i, Value);
-									i+=4;
-								}
-
-								// 2. WCID Attribute UDF:3, BSSIdx:3, Alg:3, Keytable:use share key, BSSIdx is 0
-								WCIDAttri = (pAd->SharedKey[BSS0][KeyIdx].CipherAlg<<1)|SHAREDKEYTABLE;
-								offset = MAC_WCID_ATTRIBUTE_BASE + (BSS0Mcast_WCID* HW_WCID_ATTRI_SIZE);
-							        DBGPRINT(RT_DEBUG_TRACE, ("BSS0Mcast_WCID : offset = %x, WCIDAttri = %x\n", offset, WCIDAttri));
-								RTUSBWriteMACRegister(pAd, offset, WCIDAttri);
-
-							}
-							AsicAddSharedKeyEntry(pAd, BSS0, (UCHAR)KeyIdx, CipherAlg, pWepKey->KeyMaterial, NULL, NULL);
-							DBGPRINT(RT_DEBUG_TRACE, ("CmdThread::OID_802_11_ADD_WEP (KeyIdx=%d, Len=%d-byte)\n", KeyIdx, pWepKey->KeyLength));
-						}
-#endif // CONFIG_STA_SUPPORT //
-					}
-					break;
-
-				case CMDTHREAD_802_11_COUNTER_MEASURE:
-					break;
-
-				default:
-					DBGPRINT(RT_DEBUG_ERROR, ("--> Control Thread !! ERROR !! Unknown(cmdqelmt->command=0x%x) !! \n", cmdqelmt->command));
-					break;
-			}
-		}
-
-		if (cmdqelmt->CmdFromNdis == TRUE)
-		{
-				if (cmdqelmt->buffer != NULL)
-					NdisFreeMemory(cmdqelmt->buffer, cmdqelmt->bufferlength, 0);
-
-			NdisFreeMemory(cmdqelmt, sizeof(CmdQElmt), 0);
-		}
-		else
-		{
-			if ((cmdqelmt->buffer != NULL) && (cmdqelmt->bufferlength != 0))
-				NdisFreeMemory(cmdqelmt->buffer, cmdqelmt->bufferlength, 0);
-            {
-				NdisFreeMemory(cmdqelmt, sizeof(CmdQElmt), 0);
-			}
-		}
-	}	/* end of while */
-}
-
+#include "../../rt2870/common/rtusb_io.c"
diff --git a/drivers/staging/rt3070/common/spectrum.c b/drivers/staging/rt3070/common/spectrum.c
index da57b1202d6..de3b949e52f 100644
--- a/drivers/staging/rt3070/common/spectrum.c
+++ b/drivers/staging/rt3070/common/spectrum.c
@@ -1,1876 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-	action.c
-
-    Abstract:
-    Handle association related requests either from WSTA or from local MLME
-
-    Revision History:
-    Who          When          What
-    ---------    ----------    ----------------------------------------------
-	Fonchi Wu    2008	  	   created for 802.11h
- */
-
-#include "../rt_config.h"
-#include "../action.h"
-
-VOID MeasureReqTabInit(
-	IN PRTMP_ADAPTER pAd)
-{
-	NdisAllocateSpinLock(&pAd->CommonCfg.MeasureReqTabLock);
-
-	pAd->CommonCfg.pMeasureReqTab = kmalloc(sizeof(MEASURE_REQ_TAB), GFP_ATOMIC);
-	if (pAd->CommonCfg.pMeasureReqTab)
-		NdisZeroMemory(pAd->CommonCfg.pMeasureReqTab, sizeof(MEASURE_REQ_TAB));
-	else
-		DBGPRINT(RT_DEBUG_ERROR, ("%s Fail to alloc memory for pAd->CommonCfg.pMeasureReqTab.\n", __FUNCTION__));
-
-	return;
-}
-
-VOID MeasureReqTabExit(
-	IN PRTMP_ADAPTER pAd)
-{
-	NdisFreeSpinLock(pAd->CommonCfg.MeasureReqTabLock);
-
-	if (pAd->CommonCfg.pMeasureReqTab)
-		kfree(pAd->CommonCfg.pMeasureReqTab);
-	pAd->CommonCfg.pMeasureReqTab = NULL;
-
-	return;
-}
-
-static PMEASURE_REQ_ENTRY MeasureReqLookUp(
-	IN PRTMP_ADAPTER	pAd,
-	IN UINT8			DialogToken)
-{
-	UINT HashIdx;
-	PMEASURE_REQ_TAB pTab = pAd->CommonCfg.pMeasureReqTab;
-	PMEASURE_REQ_ENTRY pEntry = NULL;
-	PMEASURE_REQ_ENTRY pPrevEntry = NULL;
-
-	if (pTab == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("%s: pMeasureReqTab doesn't exist.\n", __FUNCTION__));
-		return NULL;
-	}
-
-	RTMP_SEM_LOCK(&pAd->CommonCfg.MeasureReqTabLock);
-
-	HashIdx = MQ_DIALOGTOKEN_HASH_INDEX(DialogToken);
-	pEntry = pTab->Hash[HashIdx];
-
-	while (pEntry)
-	{
-		if (pEntry->DialogToken == DialogToken)
-			break;
-		else
-		{
-			pPrevEntry = pEntry;
-			pEntry = pEntry->pNext;
-		}
-	}
-
-	RTMP_SEM_UNLOCK(&pAd->CommonCfg.MeasureReqTabLock);
-
-	return pEntry;
-}
-
-static PMEASURE_REQ_ENTRY MeasureReqInsert(
-	IN PRTMP_ADAPTER	pAd,
-	IN UINT8			DialogToken)
-{
-	INT i;
-	ULONG HashIdx;
-	PMEASURE_REQ_TAB pTab = pAd->CommonCfg.pMeasureReqTab;
-	PMEASURE_REQ_ENTRY pEntry = NULL, pCurrEntry;
-	ULONG Now;
-
-	if(pTab == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("%s: pMeasureReqTab doesn't exist.\n", __FUNCTION__));
-		return NULL;
-	}
-
-	pEntry = MeasureReqLookUp(pAd, DialogToken);
-	if (pEntry == NULL)
-	{
-		RTMP_SEM_LOCK(&pAd->CommonCfg.MeasureReqTabLock);
-		for (i = 0; i < MAX_MEASURE_REQ_TAB_SIZE; i++)
-		{
-			NdisGetSystemUpTime(&Now);
-			pEntry = &pTab->Content[i];
-
-			if ((pEntry->Valid == TRUE)
-				&& RTMP_TIME_AFTER((unsigned long)Now, (unsigned long)(pEntry->lastTime + MQ_REQ_AGE_OUT)))
-			{
-				PMEASURE_REQ_ENTRY pPrevEntry = NULL;
-				ULONG HashIdx = MQ_DIALOGTOKEN_HASH_INDEX(pEntry->DialogToken);
-				PMEASURE_REQ_ENTRY pProbeEntry = pTab->Hash[HashIdx];
-
-				// update Hash list
-				do
-				{
-					if (pProbeEntry == pEntry)
-					{
-						if (pPrevEntry == NULL)
-						{
-							pTab->Hash[HashIdx] = pEntry->pNext;
-						}
-						else
-						{
-							pPrevEntry->pNext = pEntry->pNext;
-						}
-						break;
-					}
-
-					pPrevEntry = pProbeEntry;
-					pProbeEntry = pProbeEntry->pNext;
-				} while (pProbeEntry);
-
-				NdisZeroMemory(pEntry, sizeof(MEASURE_REQ_ENTRY));
-				pTab->Size--;
-
-				break;
-			}
-
-			if (pEntry->Valid == FALSE)
-				break;
-		}
-
-		if (i < MAX_MEASURE_REQ_TAB_SIZE)
-		{
-			NdisGetSystemUpTime(&Now);
-			pEntry->lastTime = Now;
-			pEntry->Valid = TRUE;
-			pEntry->DialogToken = DialogToken;
-			pTab->Size++;
-		}
-		else
-		{
-			pEntry = NULL;
-			DBGPRINT(RT_DEBUG_ERROR, ("%s: pMeasureReqTab tab full.\n", __FUNCTION__));
-		}
-
-		// add this Neighbor entry into HASH table
-		if (pEntry)
-		{
-			HashIdx = MQ_DIALOGTOKEN_HASH_INDEX(DialogToken);
-			if (pTab->Hash[HashIdx] == NULL)
-			{
-				pTab->Hash[HashIdx] = pEntry;
-			}
-			else
-			{
-				pCurrEntry = pTab->Hash[HashIdx];
-				while (pCurrEntry->pNext != NULL)
-					pCurrEntry = pCurrEntry->pNext;
-				pCurrEntry->pNext = pEntry;
-			}
-		}
-
-		RTMP_SEM_UNLOCK(&pAd->CommonCfg.MeasureReqTabLock);
-	}
-
-	return pEntry;
-}
-
-static VOID MeasureReqDelete(
-	IN PRTMP_ADAPTER	pAd,
-	IN UINT8			DialogToken)
-{
-	PMEASURE_REQ_TAB pTab = pAd->CommonCfg.pMeasureReqTab;
-	PMEASURE_REQ_ENTRY pEntry = NULL;
-
-	if(pTab == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("%s: pMeasureReqTab doesn't exist.\n", __FUNCTION__));
-		return;
-	}
-
-	// if empty, return
-	if (pTab->Size == 0)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("pMeasureReqTab empty.\n"));
-		return;
-	}
-
-	pEntry = MeasureReqLookUp(pAd, DialogToken);
-	if (pEntry != NULL)
-	{
-		PMEASURE_REQ_ENTRY pPrevEntry = NULL;
-		ULONG HashIdx = MQ_DIALOGTOKEN_HASH_INDEX(pEntry->DialogToken);
-		PMEASURE_REQ_ENTRY pProbeEntry = pTab->Hash[HashIdx];
-
-		RTMP_SEM_LOCK(&pAd->CommonCfg.MeasureReqTabLock);
-		// update Hash list
-		do
-		{
-			if (pProbeEntry == pEntry)
-			{
-				if (pPrevEntry == NULL)
-				{
-					pTab->Hash[HashIdx] = pEntry->pNext;
-				}
-				else
-				{
-					pPrevEntry->pNext = pEntry->pNext;
-				}
-				break;
-			}
-
-			pPrevEntry = pProbeEntry;
-			pProbeEntry = pProbeEntry->pNext;
-		} while (pProbeEntry);
-
-		NdisZeroMemory(pEntry, sizeof(MEASURE_REQ_ENTRY));
-		pTab->Size--;
-
-		RTMP_SEM_UNLOCK(&pAd->CommonCfg.MeasureReqTabLock);
-	}
-
-	return;
-}
-
-VOID TpcReqTabInit(
-	IN PRTMP_ADAPTER pAd)
-{
-	NdisAllocateSpinLock(&pAd->CommonCfg.TpcReqTabLock);
-
-	pAd->CommonCfg.pTpcReqTab = kmalloc(sizeof(TPC_REQ_TAB), GFP_ATOMIC);
-	if (pAd->CommonCfg.pTpcReqTab)
-		NdisZeroMemory(pAd->CommonCfg.pTpcReqTab, sizeof(TPC_REQ_TAB));
-	else
-		DBGPRINT(RT_DEBUG_ERROR, ("%s Fail to alloc memory for pAd->CommonCfg.pTpcReqTab.\n", __FUNCTION__));
-
-	return;
-}
-
-VOID TpcReqTabExit(
-	IN PRTMP_ADAPTER pAd)
-{
-	NdisFreeSpinLock(pAd->CommonCfg.TpcReqTabLock);
-
-	if (pAd->CommonCfg.pTpcReqTab)
-		kfree(pAd->CommonCfg.pTpcReqTab);
-	pAd->CommonCfg.pTpcReqTab = NULL;
-
-	return;
-}
-
-static PTPC_REQ_ENTRY TpcReqLookUp(
-	IN PRTMP_ADAPTER	pAd,
-	IN UINT8			DialogToken)
-{
-	UINT HashIdx;
-	PTPC_REQ_TAB pTab = pAd->CommonCfg.pTpcReqTab;
-	PTPC_REQ_ENTRY pEntry = NULL;
-	PTPC_REQ_ENTRY pPrevEntry = NULL;
-
-	if (pTab == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("%s: pTpcReqTab doesn't exist.\n", __FUNCTION__));
-		return NULL;
-	}
-
-	RTMP_SEM_LOCK(&pAd->CommonCfg.TpcReqTabLock);
-
-	HashIdx = TPC_DIALOGTOKEN_HASH_INDEX(DialogToken);
-	pEntry = pTab->Hash[HashIdx];
-
-	while (pEntry)
-	{
-		if (pEntry->DialogToken == DialogToken)
-			break;
-		else
-		{
-			pPrevEntry = pEntry;
-			pEntry = pEntry->pNext;
-		}
-	}
-
-	RTMP_SEM_UNLOCK(&pAd->CommonCfg.TpcReqTabLock);
-
-	return pEntry;
-}
-
-
-static PTPC_REQ_ENTRY TpcReqInsert(
-	IN PRTMP_ADAPTER	pAd,
-	IN UINT8			DialogToken)
-{
-	INT i;
-	ULONG HashIdx;
-	PTPC_REQ_TAB pTab = pAd->CommonCfg.pTpcReqTab;
-	PTPC_REQ_ENTRY pEntry = NULL, pCurrEntry;
-	ULONG Now;
-
-	if(pTab == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("%s: pTpcReqTab doesn't exist.\n", __FUNCTION__));
-		return NULL;
-	}
-
-	pEntry = TpcReqLookUp(pAd, DialogToken);
-	if (pEntry == NULL)
-	{
-		RTMP_SEM_LOCK(&pAd->CommonCfg.TpcReqTabLock);
-		for (i = 0; i < MAX_TPC_REQ_TAB_SIZE; i++)
-		{
-			NdisGetSystemUpTime(&Now);
-			pEntry = &pTab->Content[i];
-
-			if ((pEntry->Valid == TRUE)
-				&& RTMP_TIME_AFTER((unsigned long)Now, (unsigned long)(pEntry->lastTime + TPC_REQ_AGE_OUT)))
-			{
-				PTPC_REQ_ENTRY pPrevEntry = NULL;
-				ULONG HashIdx = TPC_DIALOGTOKEN_HASH_INDEX(pEntry->DialogToken);
-				PTPC_REQ_ENTRY pProbeEntry = pTab->Hash[HashIdx];
-
-				// update Hash list
-				do
-				{
-					if (pProbeEntry == pEntry)
-					{
-						if (pPrevEntry == NULL)
-						{
-							pTab->Hash[HashIdx] = pEntry->pNext;
-						}
-						else
-						{
-							pPrevEntry->pNext = pEntry->pNext;
-						}
-						break;
-					}
-
-					pPrevEntry = pProbeEntry;
-					pProbeEntry = pProbeEntry->pNext;
-				} while (pProbeEntry);
-
-				NdisZeroMemory(pEntry, sizeof(TPC_REQ_ENTRY));
-				pTab->Size--;
-
-				break;
-			}
-
-			if (pEntry->Valid == FALSE)
-				break;
-		}
-
-		if (i < MAX_TPC_REQ_TAB_SIZE)
-		{
-			NdisGetSystemUpTime(&Now);
-			pEntry->lastTime = Now;
-			pEntry->Valid = TRUE;
-			pEntry->DialogToken = DialogToken;
-			pTab->Size++;
-		}
-		else
-		{
-			pEntry = NULL;
-			DBGPRINT(RT_DEBUG_ERROR, ("%s: pTpcReqTab tab full.\n", __FUNCTION__));
-		}
-
-		// add this Neighbor entry into HASH table
-		if (pEntry)
-		{
-			HashIdx = TPC_DIALOGTOKEN_HASH_INDEX(DialogToken);
-			if (pTab->Hash[HashIdx] == NULL)
-			{
-				pTab->Hash[HashIdx] = pEntry;
-			}
-			else
-			{
-				pCurrEntry = pTab->Hash[HashIdx];
-				while (pCurrEntry->pNext != NULL)
-					pCurrEntry = pCurrEntry->pNext;
-				pCurrEntry->pNext = pEntry;
-			}
-		}
-
-		RTMP_SEM_UNLOCK(&pAd->CommonCfg.TpcReqTabLock);
-	}
-
-	return pEntry;
-}
-
-static VOID TpcReqDelete(
-	IN PRTMP_ADAPTER	pAd,
-	IN UINT8			DialogToken)
-{
-	PTPC_REQ_TAB pTab = pAd->CommonCfg.pTpcReqTab;
-	PTPC_REQ_ENTRY pEntry = NULL;
-
-	if(pTab == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("%s: pTpcReqTab doesn't exist.\n", __FUNCTION__));
-		return;
-	}
-
-	// if empty, return
-	if (pTab->Size == 0)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("pTpcReqTab empty.\n"));
-		return;
-	}
-
-	pEntry = TpcReqLookUp(pAd, DialogToken);
-	if (pEntry != NULL)
-	{
-		PTPC_REQ_ENTRY pPrevEntry = NULL;
-		ULONG HashIdx = TPC_DIALOGTOKEN_HASH_INDEX(pEntry->DialogToken);
-		PTPC_REQ_ENTRY pProbeEntry = pTab->Hash[HashIdx];
-
-		RTMP_SEM_LOCK(&pAd->CommonCfg.TpcReqTabLock);
-		// update Hash list
-		do
-		{
-			if (pProbeEntry == pEntry)
-			{
-				if (pPrevEntry == NULL)
-				{
-					pTab->Hash[HashIdx] = pEntry->pNext;
-				}
-				else
-				{
-					pPrevEntry->pNext = pEntry->pNext;
-				}
-				break;
-			}
-
-			pPrevEntry = pProbeEntry;
-			pProbeEntry = pProbeEntry->pNext;
-		} while (pProbeEntry);
-
-		NdisZeroMemory(pEntry, sizeof(TPC_REQ_ENTRY));
-		pTab->Size--;
-
-		RTMP_SEM_UNLOCK(&pAd->CommonCfg.TpcReqTabLock);
-	}
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		Get Current TimeS tamp.
-
-	Parametrs:
-
-	Return	: Current Time Stamp.
-	==========================================================================
- */
-static UINT64 GetCurrentTimeStamp(
-	IN PRTMP_ADAPTER pAd)
-{
-	// get current time stamp.
-	return 0;
-}
-
-/*
-	==========================================================================
-	Description:
-		Get Current Transmit Power.
-
-	Parametrs:
-
-	Return	: Current Time Stamp.
-	==========================================================================
- */
-static UINT8 GetCurTxPwr(
-	IN PRTMP_ADAPTER pAd,
-	IN UINT8 Wcid)
-{
-	return 16; /* 16 dBm */
-}
-
-/*
-	==========================================================================
-	Description:
-		Insert Dialog Token into frame.
-
-	Parametrs:
-		1. frame buffer pointer.
-		2. frame length.
-		3. Dialog token.
-
-	Return	: None.
-	==========================================================================
- */
-static VOID InsertDialogToken(
-	IN PRTMP_ADAPTER pAd,
-	OUT PUCHAR pFrameBuf,
-	OUT PULONG pFrameLen,
-	IN UINT8 DialogToken)
-{
-	ULONG TempLen;
-	MakeOutgoingFrame(pFrameBuf,	&TempLen,
-					1,				&DialogToken,
-					END_OF_ARGS);
-
-	*pFrameLen = *pFrameLen + TempLen;
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		Insert TPC Request IE into frame.
-
-	Parametrs:
-		1. frame buffer pointer.
-		2. frame length.
-
-	Return	: None.
-	==========================================================================
- */
- static VOID InsertTpcReqIE(
-	IN PRTMP_ADAPTER pAd,
-	OUT PUCHAR pFrameBuf,
-	OUT PULONG pFrameLen)
-{
-	ULONG TempLen;
-	ULONG Len = 0;
-	UINT8 ElementID = IE_TPC_REQUEST;
-
-	MakeOutgoingFrame(pFrameBuf,					&TempLen,
-						1,							&ElementID,
-						1,							&Len,
-						END_OF_ARGS);
-
-	*pFrameLen = *pFrameLen + TempLen;
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		Insert TPC Report IE into frame.
-
-	Parametrs:
-		1. frame buffer pointer.
-		2. frame length.
-		3. Transmit Power.
-		4. Link Margin.
-
-	Return	: None.
-	==========================================================================
- */
- static VOID InsertTpcReportIE(
-	IN PRTMP_ADAPTER pAd,
-	OUT PUCHAR pFrameBuf,
-	OUT PULONG pFrameLen,
-	IN UINT8 TxPwr,
-	IN UINT8 LinkMargin)
-{
-	ULONG TempLen;
-	ULONG Len = sizeof(TPC_REPORT_INFO);
-	UINT8 ElementID = IE_TPC_REPORT;
-	TPC_REPORT_INFO TpcReportIE;
-
-	TpcReportIE.TxPwr = TxPwr;
-	TpcReportIE.LinkMargin = LinkMargin;
-
-	MakeOutgoingFrame(pFrameBuf,					&TempLen,
-						1,							&ElementID,
-						1,							&Len,
-						Len,						&TpcReportIE,
-						END_OF_ARGS);
-
-	*pFrameLen = *pFrameLen + TempLen;
-
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		Insert Channel Switch Announcement IE into frame.
-
-	Parametrs:
-		1. frame buffer pointer.
-		2. frame length.
-		3. channel switch announcement mode.
-		4. new selected channel.
-		5. channel switch announcement count.
-
-	Return	: None.
-	==========================================================================
- */
-static VOID InsertChSwAnnIE(
-	IN PRTMP_ADAPTER pAd,
-	OUT PUCHAR pFrameBuf,
-	OUT PULONG pFrameLen,
-	IN UINT8 ChSwMode,
-	IN UINT8 NewChannel,
-	IN UINT8 ChSwCnt)
-{
-	ULONG TempLen;
-	ULONG Len = sizeof(CH_SW_ANN_INFO);
-	UINT8 ElementID = IE_CHANNEL_SWITCH_ANNOUNCEMENT;
-	CH_SW_ANN_INFO ChSwAnnIE;
-
-	ChSwAnnIE.ChSwMode = ChSwMode;
-	ChSwAnnIE.Channel = NewChannel;
-	ChSwAnnIE.ChSwCnt = ChSwCnt;
-
-	MakeOutgoingFrame(pFrameBuf,				&TempLen,
-						1,						&ElementID,
-						1,						&Len,
-						Len,					&ChSwAnnIE,
-						END_OF_ARGS);
-
-	*pFrameLen = *pFrameLen + TempLen;
-
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		Insert Measure Request IE into frame.
-
-	Parametrs:
-		1. frame buffer pointer.
-		2. frame length.
-		3. Measure Token.
-		4. Measure Request Mode.
-		5. Measure Request Type.
-		6. Measure Channel.
-		7. Measure Start time.
-		8. Measure Duration.
-
-
-	Return	: None.
-	==========================================================================
- */
-static VOID InsertMeasureReqIE(
-	IN PRTMP_ADAPTER pAd,
-	OUT PUCHAR pFrameBuf,
-	OUT PULONG pFrameLen,
-	IN PMEASURE_REQ_INFO pMeasureReqIE)
-{
-	ULONG TempLen;
-	UINT8 Len = sizeof(MEASURE_REQ_INFO);
-	UINT8 ElementID = IE_MEASUREMENT_REQUEST;
-
-	MakeOutgoingFrame(pFrameBuf,					&TempLen,
-						1,							&ElementID,
-						1,							&Len,
-						Len,						pMeasureReqIE,
-						END_OF_ARGS);
-
-	*pFrameLen = *pFrameLen + TempLen;
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		Insert Measure Report IE into frame.
-
-	Parametrs:
-		1. frame buffer pointer.
-		2. frame length.
-		3. Measure Token.
-		4. Measure Request Mode.
-		5. Measure Request Type.
-		6. Length of Report Infomation
-		7. Pointer of Report Infomation Buffer.
-
-	Return	: None.
-	==========================================================================
- */
-static VOID InsertMeasureReportIE(
-	IN PRTMP_ADAPTER pAd,
-	OUT PUCHAR pFrameBuf,
-	OUT PULONG pFrameLen,
-	IN PMEASURE_REPORT_INFO pMeasureReportIE,
-	IN UINT8 ReportLnfoLen,
-	IN PUINT8 pReportInfo)
-{
-	ULONG TempLen;
-	ULONG Len;
-	UINT8 ElementID = IE_MEASUREMENT_REPORT;
-
-	Len = sizeof(MEASURE_REPORT_INFO) + ReportLnfoLen;
-
-	MakeOutgoingFrame(pFrameBuf,					&TempLen,
-						1,							&ElementID,
-						1,							&Len,
-						Len,						pMeasureReportIE,
-						END_OF_ARGS);
-
-	*pFrameLen = *pFrameLen + TempLen;
-
-	if ((ReportLnfoLen > 0) && (pReportInfo != NULL))
-	{
-		MakeOutgoingFrame(pFrameBuf + *pFrameLen,		&TempLen,
-							ReportLnfoLen,				pReportInfo,
-							END_OF_ARGS);
-
-		*pFrameLen = *pFrameLen + TempLen;
-	}
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		Prepare Measurement request action frame and enqueue it into
-		management queue waiting for transmition.
-
-	Parametrs:
-		1. the destination mac address of the frame.
-
-	Return	: None.
-	==========================================================================
- */
-VOID EnqueueMeasurementReq(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pDA,
-	IN UINT8 MeasureToken,
-	IN UINT8 MeasureReqMode,
-	IN UINT8 MeasureReqType,
-	IN UINT8 MeasureCh,
-	IN UINT16 MeasureDuration)
-{
-	PUCHAR pOutBuffer = NULL;
-	NDIS_STATUS NStatus;
-	ULONG FrameLen;
-	HEADER_802_11 ActHdr;
-	MEASURE_REQ_INFO MeasureReqIE;
-	UINT8 RmReqDailogToken = RandomByte(pAd);
-	UINT64 MeasureStartTime = GetCurrentTimeStamp(pAd);
-
-	// build action frame header.
-	MgtMacHeaderInit(pAd, &ActHdr, SUBTYPE_ACTION, 0, pDA,
-						pAd->CurrentAddress);
-
-	NStatus = MlmeAllocateMemory(pAd, (PVOID)&pOutBuffer);  //Get an unused nonpaged memory
-	if(NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("%s() allocate memory failed \n", __FUNCTION__));
-		return;
-	}
-	NdisMoveMemory(pOutBuffer, (PCHAR)&ActHdr, sizeof(HEADER_802_11));
-	FrameLen = sizeof(HEADER_802_11);
-
-	InsertActField(pAd, (pOutBuffer + FrameLen), &FrameLen, CATEGORY_SPECTRUM, SPEC_MRQ);
-
-	// fill Dialog Token
-	InsertDialogToken(pAd, (pOutBuffer + FrameLen), &FrameLen, MeasureToken);
-
-	// prepare Measurement IE.
-	NdisZeroMemory(&MeasureReqIE, sizeof(MEASURE_REQ_INFO));
-	MeasureReqIE.Token = RmReqDailogToken;
-	MeasureReqIE.ReqMode.word = MeasureReqMode;
-	MeasureReqIE.ReqType = MeasureReqType;
-	MeasureReqIE.MeasureReq.ChNum = MeasureCh;
-	MeasureReqIE.MeasureReq.MeasureStartTime = cpu2le64(MeasureStartTime);
-	MeasureReqIE.MeasureReq.MeasureDuration = cpu2le16(MeasureDuration);
-	InsertMeasureReqIE(pAd, (pOutBuffer + FrameLen), &FrameLen, &MeasureReqIE);
-
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		Prepare Measurement report action frame and enqueue it into
-		management queue waiting for transmition.
-
-	Parametrs:
-		1. the destination mac address of the frame.
-
-	Return	: None.
-	==========================================================================
- */
-VOID EnqueueMeasurementRep(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pDA,
-	IN UINT8 DialogToken,
-	IN UINT8 MeasureToken,
-	IN UINT8 MeasureReqMode,
-	IN UINT8 MeasureReqType,
-	IN UINT8 ReportInfoLen,
-	IN PUINT8 pReportInfo)
-{
-	PUCHAR pOutBuffer = NULL;
-	NDIS_STATUS NStatus;
-	ULONG FrameLen;
-	HEADER_802_11 ActHdr;
-	MEASURE_REPORT_INFO MeasureRepIE;
-
-	// build action frame header.
-	MgtMacHeaderInit(pAd, &ActHdr, SUBTYPE_ACTION, 0, pDA,
-						pAd->CurrentAddress);
-
-	NStatus = MlmeAllocateMemory(pAd, (PVOID)&pOutBuffer);  //Get an unused nonpaged memory
-	if(NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("%s() allocate memory failed \n", __FUNCTION__));
-		return;
-	}
-	NdisMoveMemory(pOutBuffer, (PCHAR)&ActHdr, sizeof(HEADER_802_11));
-	FrameLen = sizeof(HEADER_802_11);
-
-	InsertActField(pAd, (pOutBuffer + FrameLen), &FrameLen, CATEGORY_SPECTRUM, SPEC_MRP);
-
-	// fill Dialog Token
-	InsertDialogToken(pAd, (pOutBuffer + FrameLen), &FrameLen, DialogToken);
-
-	// prepare Measurement IE.
-	NdisZeroMemory(&MeasureRepIE, sizeof(MEASURE_REPORT_INFO));
-	MeasureRepIE.Token = MeasureToken;
-	MeasureRepIE.ReportMode.word = MeasureReqMode;
-	MeasureRepIE.ReportType = MeasureReqType;
-	InsertMeasureReportIE(pAd, (pOutBuffer + FrameLen), &FrameLen, &MeasureRepIE, ReportInfoLen, pReportInfo);
-
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		Prepare TPC Request action frame and enqueue it into
-		management queue waiting for transmition.
-
-	Parametrs:
-		1. the destination mac address of the frame.
-
-	Return	: None.
-	==========================================================================
- */
-VOID EnqueueTPCReq(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pDA,
-	IN UCHAR DialogToken)
-{
-	PUCHAR pOutBuffer = NULL;
-	NDIS_STATUS NStatus;
-	ULONG FrameLen;
-
-	HEADER_802_11 ActHdr;
-
-	// build action frame header.
-	MgtMacHeaderInit(pAd, &ActHdr, SUBTYPE_ACTION, 0, pDA,
-						pAd->CurrentAddress);
-
-	NStatus = MlmeAllocateMemory(pAd, (PVOID)&pOutBuffer);  //Get an unused nonpaged memory
-	if(NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("%s() allocate memory failed \n", __FUNCTION__));
-		return;
-	}
-	NdisMoveMemory(pOutBuffer, (PCHAR)&ActHdr, sizeof(HEADER_802_11));
-	FrameLen = sizeof(HEADER_802_11);
-
-	InsertActField(pAd, (pOutBuffer + FrameLen), &FrameLen, CATEGORY_SPECTRUM, SPEC_TPCRQ);
-
-	// fill Dialog Token
-	InsertDialogToken(pAd, (pOutBuffer + FrameLen), &FrameLen, DialogToken);
-
-	// Insert TPC Request IE.
-	InsertTpcReqIE(pAd, (pOutBuffer + FrameLen), &FrameLen);
-
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		Prepare TPC Report action frame and enqueue it into
-		management queue waiting for transmition.
-
-	Parametrs:
-		1. the destination mac address of the frame.
-
-	Return	: None.
-	==========================================================================
- */
-VOID EnqueueTPCRep(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pDA,
-	IN UINT8 DialogToken,
-	IN UINT8 TxPwr,
-	IN UINT8 LinkMargin)
-{
-	PUCHAR pOutBuffer = NULL;
-	NDIS_STATUS NStatus;
-	ULONG FrameLen;
-
-	HEADER_802_11 ActHdr;
-
-	// build action frame header.
-	MgtMacHeaderInit(pAd, &ActHdr, SUBTYPE_ACTION, 0, pDA,
-						pAd->CurrentAddress);
-
-	NStatus = MlmeAllocateMemory(pAd, (PVOID)&pOutBuffer);  //Get an unused nonpaged memory
-	if(NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("%s() allocate memory failed \n", __FUNCTION__));
-		return;
-	}
-	NdisMoveMemory(pOutBuffer, (PCHAR)&ActHdr, sizeof(HEADER_802_11));
-	FrameLen = sizeof(HEADER_802_11);
-
-	InsertActField(pAd, (pOutBuffer + FrameLen), &FrameLen, CATEGORY_SPECTRUM, SPEC_TPCRP);
-
-	// fill Dialog Token
-	InsertDialogToken(pAd, (pOutBuffer + FrameLen), &FrameLen, DialogToken);
-
-	// Insert TPC Request IE.
-	InsertTpcReportIE(pAd, (pOutBuffer + FrameLen), &FrameLen, TxPwr, LinkMargin);
-
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		Prepare Channel Switch Announcement action frame and enqueue it into
-		management queue waiting for transmition.
-
-	Parametrs:
-		1. the destination mac address of the frame.
-		2. Channel switch announcement mode.
-		2. a New selected channel.
-
-	Return	: None.
-	==========================================================================
- */
-VOID EnqueueChSwAnn(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pDA,
-	IN UINT8 ChSwMode,
-	IN UINT8 NewCh)
-{
-	PUCHAR pOutBuffer = NULL;
-	NDIS_STATUS NStatus;
-	ULONG FrameLen;
-
-	HEADER_802_11 ActHdr;
-
-	// build action frame header.
-	MgtMacHeaderInit(pAd, &ActHdr, SUBTYPE_ACTION, 0, pDA,
-						pAd->CurrentAddress);
-
-	NStatus = MlmeAllocateMemory(pAd, (PVOID)&pOutBuffer);  //Get an unused nonpaged memory
-	if(NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("%s() allocate memory failed \n", __FUNCTION__));
-		return;
-	}
-	NdisMoveMemory(pOutBuffer, (PCHAR)&ActHdr, sizeof(HEADER_802_11));
-	FrameLen = sizeof(HEADER_802_11);
-
-	InsertActField(pAd, (pOutBuffer + FrameLen), &FrameLen, CATEGORY_SPECTRUM, SPEC_CHANNEL_SWITCH);
-
-	InsertChSwAnnIE(pAd, (pOutBuffer + FrameLen), &FrameLen, ChSwMode, NewCh, 0);
-
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-	return;
-}
-
-static BOOLEAN DfsRequirementCheck(
-	IN PRTMP_ADAPTER pAd,
-	IN UINT8 Channel)
-{
-	BOOLEAN Result = FALSE;
-	INT i;
-
-	do
-	{
-		// check DFS procedure is running.
-		// make sure DFS procedure won't start twice.
-		if (pAd->CommonCfg.RadarDetect.RDMode != RD_NORMAL_MODE)
-		{
-			Result = FALSE;
-			break;
-		}
-
-		// check the new channel carried from Channel Switch Announcemnet is valid.
-		for (i=0; i<pAd->ChannelListNum; i++)
-		{
-			if ((Channel == pAd->ChannelList[i].Channel)
-				&&(pAd->ChannelList[i].RemainingTimeForUse == 0))
-			{
-				// found radar signal in the channel. the channel can't use at least for 30 minutes.
-				pAd->ChannelList[i].RemainingTimeForUse = 1800;//30 min = 1800 sec
-				Result = TRUE;
-				break;
-			}
-		}
-	} while(FALSE);
-
-	return Result;
-}
-
-VOID NotifyChSwAnnToPeerAPs(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pRA,
-	IN PUCHAR pTA,
-	IN UINT8 ChSwMode,
-	IN UINT8 Channel)
-{
-#ifdef WDS_SUPPORT
-	if (!((pRA[0] & 0xff) == 0xff)) // is pRA a broadcase address.
-	{
-		INT i;
-		// info neighbor APs that Radar signal found throgh WDS link.
-		for (i = 0; i < MAX_WDS_ENTRY; i++)
-		{
-			if (ValidWdsEntry(pAd, i))
-			{
-				PUCHAR pDA = pAd->WdsTab.WdsEntry[i].PeerWdsAddr;
-
-				// DA equal to SA. have no necessary orignal AP which found Radar signal.
-				if (MAC_ADDR_EQUAL(pTA, pDA))
-					continue;
-
-				// send Channel Switch Action frame to info Neighbro APs.
-				EnqueueChSwAnn(pAd, pDA, ChSwMode, Channel);
-			}
-		}
-	}
-#endif // WDS_SUPPORT //
-}
-
-static VOID StartDFSProcedure(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR Channel,
-	IN UINT8 ChSwMode)
-{
-	// start DFS procedure
-	pAd->CommonCfg.Channel = Channel;
-#ifdef DOT11_N_SUPPORT
-	N_ChannelCheck(pAd);
-#endif // DOT11_N_SUPPORT //
-	pAd->CommonCfg.RadarDetect.RDMode = RD_SWITCHING_MODE;
-	pAd->CommonCfg.RadarDetect.CSCount = 0;
-}
-
-/*
-	==========================================================================
-	Description:
-		Channel Switch Announcement action frame sanity check.
-
-	Parametrs:
-		1. MLME message containing the received frame
-		2. message length.
-		3. Channel switch announcement infomation buffer.
-
-
-	Return	: None.
-	==========================================================================
- */
-
-/*
-  Channel Switch Announcement IE.
-  +----+-----+-----------+------------+-----------+
-  | ID | Len |Ch Sw Mode | New Ch Num | Ch Sw Cnt |
-  +----+-----+-----------+------------+-----------+
-    1    1        1           1            1
-*/
-static BOOLEAN PeerChSwAnnSanity(
-	IN PRTMP_ADAPTER pAd,
-	IN VOID *pMsg,
-	IN ULONG MsgLen,
-	OUT PCH_SW_ANN_INFO pChSwAnnInfo)
-{
-	PFRAME_802_11 Fr = (PFRAME_802_11)pMsg;
-	PUCHAR pFramePtr = Fr->Octet;
-	BOOLEAN result = FALSE;
-	PEID_STRUCT eid_ptr;
-
-	// skip 802.11 header.
-	MsgLen -= sizeof(HEADER_802_11);
-
-	// skip category and action code.
-	pFramePtr += 2;
-	MsgLen -= 2;
-
-	if (pChSwAnnInfo == NULL)
-		return result;
-
-	eid_ptr = (PEID_STRUCT)pFramePtr;
-	while (((UCHAR*)eid_ptr + eid_ptr->Len + 1) < ((PUCHAR)pFramePtr + MsgLen))
-	{
-		switch(eid_ptr->Eid)
-		{
-			case IE_CHANNEL_SWITCH_ANNOUNCEMENT:
-				NdisMoveMemory(&pChSwAnnInfo->ChSwMode, eid_ptr->Octet, 1);
-				NdisMoveMemory(&pChSwAnnInfo->Channel, eid_ptr->Octet + 1, 1);
-				NdisMoveMemory(&pChSwAnnInfo->ChSwCnt, eid_ptr->Octet + 2, 1);
-
-				result = TRUE;
-                break;
-
-			default:
-				break;
-		}
-		eid_ptr = (PEID_STRUCT)((UCHAR*)eid_ptr + 2 + eid_ptr->Len);
-	}
-
-	return result;
-}
-
-/*
-	==========================================================================
-	Description:
-		Measurement request action frame sanity check.
-
-	Parametrs:
-		1. MLME message containing the received frame
-		2. message length.
-		3. Measurement request infomation buffer.
-
-	Return	: None.
-	==========================================================================
- */
-static BOOLEAN PeerMeasureReqSanity(
-	IN PRTMP_ADAPTER pAd,
-	IN VOID *pMsg,
-	IN ULONG MsgLen,
-	OUT PUINT8 pDialogToken,
-	OUT PMEASURE_REQ_INFO pMeasureReqInfo)
-{
-	PFRAME_802_11 Fr = (PFRAME_802_11)pMsg;
-	PUCHAR pFramePtr = Fr->Octet;
-	BOOLEAN result = FALSE;
-	PEID_STRUCT eid_ptr;
-	PUCHAR ptr;
-	UINT64 MeasureStartTime;
-	UINT16 MeasureDuration;
-
-	// skip 802.11 header.
-	MsgLen -= sizeof(HEADER_802_11);
-
-	// skip category and action code.
-	pFramePtr += 2;
-	MsgLen -= 2;
-
-	if (pMeasureReqInfo == NULL)
-		return result;
-
-	NdisMoveMemory(pDialogToken, pFramePtr, 1);
-	pFramePtr += 1;
-	MsgLen -= 1;
-
-	eid_ptr = (PEID_STRUCT)pFramePtr;
-	while (((UCHAR*)eid_ptr + eid_ptr->Len + 1) < ((PUCHAR)pFramePtr + MsgLen))
-	{
-		switch(eid_ptr->Eid)
-		{
-			case IE_MEASUREMENT_REQUEST:
-				NdisMoveMemory(&pMeasureReqInfo->Token, eid_ptr->Octet, 1);
-				NdisMoveMemory(&pMeasureReqInfo->ReqMode.word, eid_ptr->Octet + 1, 1);
-				NdisMoveMemory(&pMeasureReqInfo->ReqType, eid_ptr->Octet + 2, 1);
-				ptr = eid_ptr->Octet + 3;
-				NdisMoveMemory(&pMeasureReqInfo->MeasureReq.ChNum, ptr, 1);
-				NdisMoveMemory(&MeasureStartTime, ptr + 1, 8);
-				pMeasureReqInfo->MeasureReq.MeasureStartTime = SWAP64(MeasureStartTime);
-				NdisMoveMemory(&MeasureDuration, ptr + 9, 2);
-				pMeasureReqInfo->MeasureReq.MeasureDuration = SWAP16(MeasureDuration);
-
-				result = TRUE;
-				break;
-
-			default:
-				break;
-		}
-		eid_ptr = (PEID_STRUCT)((UCHAR*)eid_ptr + 2 + eid_ptr->Len);
-	}
-
-	return result;
-}
-
-/*
-	==========================================================================
-	Description:
-		Measurement report action frame sanity check.
-
-	Parametrs:
-		1. MLME message containing the received frame
-		2. message length.
-		3. Measurement report infomation buffer.
-		4. basic report infomation buffer.
-
-	Return	: None.
-	==========================================================================
- */
-
-/*
-  Measurement Report IE.
-  +----+-----+-------+-------------+--------------+----------------+
-  | ID | Len | Token | Report Mode | Measure Type | Measure Report |
-  +----+-----+-------+-------------+--------------+----------------+
-    1     1      1          1             1            variable
-
-  Basic Report.
-  +--------+------------+----------+-----+
-  | Ch Num | Start Time | Duration | Map |
-  +--------+------------+----------+-----+
-      1          8           2        1
-
-  Map Field Bit Format.
-  +-----+---------------+---------------------+-------+------------+----------+
-  | Bss | OFDM Preamble | Unidentified signal | Radar | Unmeasured | Reserved |
-  +-----+---------------+---------------------+-------+------------+----------+
-     0          1                  2              3         4          5-7
-*/
-static BOOLEAN PeerMeasureReportSanity(
-	IN PRTMP_ADAPTER pAd,
-	IN VOID *pMsg,
-	IN ULONG MsgLen,
-	OUT PUINT8 pDialogToken,
-	OUT PMEASURE_REPORT_INFO pMeasureReportInfo,
-	OUT PUINT8 pReportBuf)
-{
-	PFRAME_802_11 Fr = (PFRAME_802_11)pMsg;
-	PUCHAR pFramePtr = Fr->Octet;
-	BOOLEAN result = FALSE;
-	PEID_STRUCT eid_ptr;
-	PUCHAR ptr;
-
-	// skip 802.11 header.
-	MsgLen -= sizeof(HEADER_802_11);
-
-	// skip category and action code.
-	pFramePtr += 2;
-	MsgLen -= 2;
-
-	if (pMeasureReportInfo == NULL)
-		return result;
-
-	NdisMoveMemory(pDialogToken, pFramePtr, 1);
-	pFramePtr += 1;
-	MsgLen -= 1;
-
-	eid_ptr = (PEID_STRUCT)pFramePtr;
-	while (((UCHAR*)eid_ptr + eid_ptr->Len + 1) < ((PUCHAR)pFramePtr + MsgLen))
-	{
-		switch(eid_ptr->Eid)
-		{
-			case IE_MEASUREMENT_REPORT:
-				NdisMoveMemory(&pMeasureReportInfo->Token, eid_ptr->Octet, 1);
-				NdisMoveMemory(&pMeasureReportInfo->ReportMode, eid_ptr->Octet + 1, 1);
-				NdisMoveMemory(&pMeasureReportInfo->ReportType, eid_ptr->Octet + 2, 1);
-				if (pMeasureReportInfo->ReportType == RM_BASIC)
-				{
-					PMEASURE_BASIC_REPORT pReport = (PMEASURE_BASIC_REPORT)pReportBuf;
-					ptr = eid_ptr->Octet + 3;
-					NdisMoveMemory(&pReport->ChNum, ptr, 1);
-					NdisMoveMemory(&pReport->MeasureStartTime, ptr + 1, 8);
-					NdisMoveMemory(&pReport->MeasureDuration, ptr + 9, 2);
-					NdisMoveMemory(&pReport->Map, ptr + 11, 1);
-
-				}
-				else if (pMeasureReportInfo->ReportType == RM_CCA)
-				{
-					PMEASURE_CCA_REPORT pReport = (PMEASURE_CCA_REPORT)pReportBuf;
-					ptr = eid_ptr->Octet + 3;
-					NdisMoveMemory(&pReport->ChNum, ptr, 1);
-					NdisMoveMemory(&pReport->MeasureStartTime, ptr + 1, 8);
-					NdisMoveMemory(&pReport->MeasureDuration, ptr + 9, 2);
-					NdisMoveMemory(&pReport->CCA_Busy_Fraction, ptr + 11, 1);
-
-				}
-				else if (pMeasureReportInfo->ReportType == RM_RPI_HISTOGRAM)
-				{
-					PMEASURE_RPI_REPORT pReport = (PMEASURE_RPI_REPORT)pReportBuf;
-					ptr = eid_ptr->Octet + 3;
-					NdisMoveMemory(&pReport->ChNum, ptr, 1);
-					NdisMoveMemory(&pReport->MeasureStartTime, ptr + 1, 8);
-					NdisMoveMemory(&pReport->MeasureDuration, ptr + 9, 2);
-					NdisMoveMemory(&pReport->RPI_Density, ptr + 11, 8);
-				}
-				result = TRUE;
-                break;
-
-			default:
-				break;
-		}
-		eid_ptr = (PEID_STRUCT)((UCHAR*)eid_ptr + 2 + eid_ptr->Len);
-	}
-
-	return result;
-}
-
-/*
-	==========================================================================
-	Description:
-		TPC Request action frame sanity check.
-
-	Parametrs:
-		1. MLME message containing the received frame
-		2. message length.
-		3. Dialog Token.
-
-	Return	: None.
-	==========================================================================
- */
-static BOOLEAN PeerTpcReqSanity(
-	IN PRTMP_ADAPTER pAd,
-	IN VOID *pMsg,
-	IN ULONG MsgLen,
-	OUT PUINT8 pDialogToken)
-{
-	PFRAME_802_11 Fr = (PFRAME_802_11)pMsg;
-	PUCHAR pFramePtr = Fr->Octet;
-	BOOLEAN result = FALSE;
-	PEID_STRUCT eid_ptr;
-
-	MsgLen -= sizeof(HEADER_802_11);
-
-	// skip category and action code.
-	pFramePtr += 2;
-	MsgLen -= 2;
-
-	if (pDialogToken == NULL)
-		return result;
-
-	NdisMoveMemory(pDialogToken, pFramePtr, 1);
-	pFramePtr += 1;
-	MsgLen -= 1;
-
-	eid_ptr = (PEID_STRUCT)pFramePtr;
-	while (((UCHAR*)eid_ptr + eid_ptr->Len + 1) < ((PUCHAR)pFramePtr + MsgLen))
-	{
-		switch(eid_ptr->Eid)
-		{
-			case IE_TPC_REQUEST:
-				result = TRUE;
-                break;
-
-			default:
-				break;
-		}
-		eid_ptr = (PEID_STRUCT)((UCHAR*)eid_ptr + 2 + eid_ptr->Len);
-	}
-
-	return result;
-}
-
-/*
-	==========================================================================
-	Description:
-		TPC Report action frame sanity check.
-
-	Parametrs:
-		1. MLME message containing the received frame
-		2. message length.
-		3. Dialog Token.
-		4. TPC Report IE.
-
-	Return	: None.
-	==========================================================================
- */
-static BOOLEAN PeerTpcRepSanity(
-	IN PRTMP_ADAPTER pAd,
-	IN VOID *pMsg,
-	IN ULONG MsgLen,
-	OUT PUINT8 pDialogToken,
-	OUT PTPC_REPORT_INFO pTpcRepInfo)
-{
-	PFRAME_802_11 Fr = (PFRAME_802_11)pMsg;
-	PUCHAR pFramePtr = Fr->Octet;
-	BOOLEAN result = FALSE;
-	PEID_STRUCT eid_ptr;
-
-	MsgLen -= sizeof(HEADER_802_11);
-
-	// skip category and action code.
-	pFramePtr += 2;
-	MsgLen -= 2;
-
-	if (pDialogToken == NULL)
-		return result;
-
-	NdisMoveMemory(pDialogToken, pFramePtr, 1);
-	pFramePtr += 1;
-	MsgLen -= 1;
-
-	eid_ptr = (PEID_STRUCT)pFramePtr;
-	while (((UCHAR*)eid_ptr + eid_ptr->Len + 1) < ((PUCHAR)pFramePtr + MsgLen))
-	{
-		switch(eid_ptr->Eid)
-		{
-			case IE_TPC_REPORT:
-				NdisMoveMemory(&pTpcRepInfo->TxPwr, eid_ptr->Octet, 1);
-				NdisMoveMemory(&pTpcRepInfo->LinkMargin, eid_ptr->Octet + 1, 1);
-				result = TRUE;
-                break;
-
-			default:
-				break;
-		}
-		eid_ptr = (PEID_STRUCT)((UCHAR*)eid_ptr + 2 + eid_ptr->Len);
-	}
-
-	return result;
-}
-
-/*
-	==========================================================================
-	Description:
-		Channel Switch Announcement action frame handler.
-
-	Parametrs:
-		Elme - MLME message containing the received frame
-
-	Return	: None.
-	==========================================================================
- */
-static VOID PeerChSwAnnAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	CH_SW_ANN_INFO ChSwAnnInfo;
-	PFRAME_802_11 pFr = (PFRAME_802_11)Elem->Msg;
-#ifdef CONFIG_STA_SUPPORT
-	UCHAR index = 0, Channel = 0, NewChannel = 0;
-	ULONG Bssidx = 0;
-#endif // CONFIG_STA_SUPPORT //
-
-	NdisZeroMemory(&ChSwAnnInfo, sizeof(CH_SW_ANN_INFO));
-	if (! PeerChSwAnnSanity(pAd, Elem->Msg, Elem->MsgLen, &ChSwAnnInfo))
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("Invalid Channel Switch Action Frame.\n"));
-		return;
-	}
-
-
-#ifdef CONFIG_STA_SUPPORT
-	if (pAd->OpMode == OPMODE_STA)
-	{
-		Bssidx = BssTableSearch(&pAd->ScanTab, pFr->Hdr.Addr3, pAd->CommonCfg.Channel);
-		if (Bssidx == BSS_NOT_FOUND)
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("PeerChSwAnnAction - Bssidx is not found\n"));
-			return;
-		}
-
-		DBGPRINT(RT_DEBUG_TRACE, ("\n****Bssidx is %d, Channel = %d\n", index, pAd->ScanTab.BssEntry[Bssidx].Channel));
-		hex_dump("SSID",pAd->ScanTab.BssEntry[Bssidx].Bssid ,6);
-
-		Channel = pAd->CommonCfg.Channel;
-		NewChannel = ChSwAnnInfo.Channel;
-
-		if ((pAd->CommonCfg.bIEEE80211H == 1) && (NewChannel != 0) && (Channel != NewChannel))
-		{
-			// Switching to channel 1 can prevent from rescanning the current channel immediately (by auto reconnection).
-			// In addition, clear the MLME queue and the scan table to discard the RX packets and previous scanning results.
-			AsicSwitchChannel(pAd, 1, FALSE);
-			AsicLockChannel(pAd, 1);
-		    LinkDown(pAd, FALSE);
-			MlmeQueueInit(&pAd->Mlme.Queue);
-			BssTableInit(&pAd->ScanTab);
-		    RTMPusecDelay(1000000);		// use delay to prevent STA do reassoc
-
-			// channel sanity check
-			for (index = 0 ; index < pAd->ChannelListNum; index++)
-			{
-				if (pAd->ChannelList[index].Channel == NewChannel)
-				{
-					pAd->ScanTab.BssEntry[Bssidx].Channel = NewChannel;
-					pAd->CommonCfg.Channel = NewChannel;
-					AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
-					AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-					DBGPRINT(RT_DEBUG_TRACE, ("&&&&&&&&&&&&&&&&PeerChSwAnnAction - STA receive channel switch announcement IE (New Channel =%d)\n", NewChannel));
-					break;
-				}
-			}
-
-			if (index >= pAd->ChannelListNum)
-			{
-				DBGPRINT_ERR(("&&&&&&&&&&&&&&&&&&&&&&&&&&PeerChSwAnnAction(can not find New Channel=%d in ChannelList[%d]\n", pAd->CommonCfg.Channel, pAd->ChannelListNum));
-			}
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	return;
-}
-
-
-/*
-	==========================================================================
-	Description:
-		Measurement Request action frame handler.
-
-	Parametrs:
-		Elme - MLME message containing the received frame
-
-	Return	: None.
-	==========================================================================
- */
-static VOID PeerMeasureReqAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	PFRAME_802_11 pFr = (PFRAME_802_11)Elem->Msg;
-	UINT8 DialogToken;
-	MEASURE_REQ_INFO MeasureReqInfo;
-	MEASURE_REPORT_MODE ReportMode;
-
-	if(PeerMeasureReqSanity(pAd, Elem->Msg, Elem->MsgLen, &DialogToken, &MeasureReqInfo))
-	{
-		ReportMode.word = 0;
-		ReportMode.field.Incapable = 1;
-		EnqueueMeasurementRep(pAd, pFr->Hdr.Addr2, DialogToken, MeasureReqInfo.Token, ReportMode.word, MeasureReqInfo.ReqType, 0, NULL);
-	}
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		Measurement Report action frame handler.
-
-	Parametrs:
-		Elme - MLME message containing the received frame
-
-	Return	: None.
-	==========================================================================
- */
-static VOID PeerMeasureReportAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	MEASURE_REPORT_INFO MeasureReportInfo;
-	PFRAME_802_11 pFr = (PFRAME_802_11)Elem->Msg;
-	UINT8 DialogToken;
-	PUINT8 pMeasureReportInfo;
-
-//	if (pAd->CommonCfg.bIEEE80211H != TRUE)
-//		return;
-
-	if ((pMeasureReportInfo = kmalloc(sizeof(MEASURE_RPI_REPORT), GFP_ATOMIC)) == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("%s unable to alloc memory for measure report buffer (size=%d).\n", __FUNCTION__, sizeof(MEASURE_RPI_REPORT)));
-		return;
-	}
-
-	NdisZeroMemory(&MeasureReportInfo, sizeof(MEASURE_REPORT_INFO));
-	NdisZeroMemory(pMeasureReportInfo, sizeof(MEASURE_RPI_REPORT));
-	if (PeerMeasureReportSanity(pAd, Elem->Msg, Elem->MsgLen, &DialogToken, &MeasureReportInfo, pMeasureReportInfo))
-	{
-		do {
-			PMEASURE_REQ_ENTRY pEntry = NULL;
-
-			// Not a autonomous measure report.
-			// check the dialog token field. drop it if the dialog token doesn't match.
-			if ((DialogToken != 0)
-				&& ((pEntry = MeasureReqLookUp(pAd, DialogToken)) == NULL))
-				break;
-
-			if (pEntry != NULL)
-				MeasureReqDelete(pAd, pEntry->DialogToken);
-
-			if (MeasureReportInfo.ReportType == RM_BASIC)
-			{
-				PMEASURE_BASIC_REPORT pBasicReport = (PMEASURE_BASIC_REPORT)pMeasureReportInfo;
-				if ((pBasicReport->Map.field.Radar)
-					&& (DfsRequirementCheck(pAd, pBasicReport->ChNum) == TRUE))
-				{
-					NotifyChSwAnnToPeerAPs(pAd, pFr->Hdr.Addr1, pFr->Hdr.Addr2, 1, pBasicReport->ChNum);
-					StartDFSProcedure(pAd, pBasicReport->ChNum, 1);
-				}
-			}
-		} while (FALSE);
-	}
-	else
-		DBGPRINT(RT_DEBUG_TRACE, ("Invalid Measurement Report Frame.\n"));
-
-	kfree(pMeasureReportInfo);
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		TPC Request action frame handler.
-
-	Parametrs:
-		Elme - MLME message containing the received frame
-
-	Return	: None.
-	==========================================================================
- */
-static VOID PeerTpcReqAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	PFRAME_802_11 pFr = (PFRAME_802_11)Elem->Msg;
-	PUCHAR pFramePtr = pFr->Octet;
-	UINT8 DialogToken;
-	UINT8 TxPwr = GetCurTxPwr(pAd, Elem->Wcid);
-	UINT8 LinkMargin = 0;
-	CHAR RealRssi;
-
-	// link margin: Ratio of the received signal power to the minimum desired by the station (STA). The
-	//				STA may incorporate rate information and channel conditions, including interference, into its computation
-	//				of link margin.
-
-	RealRssi = RTMPMaxRssi(pAd, ConvertToRssi(pAd, Elem->Rssi0, RSSI_0),
-								ConvertToRssi(pAd, Elem->Rssi1, RSSI_1),
-								ConvertToRssi(pAd, Elem->Rssi2, RSSI_2));
-
-	// skip Category and action code.
-	pFramePtr += 2;
-
-	// Dialog token.
-	NdisMoveMemory(&DialogToken, pFramePtr, 1);
-
-	LinkMargin = (RealRssi / MIN_RCV_PWR);
-	if (PeerTpcReqSanity(pAd, Elem->Msg, Elem->MsgLen, &DialogToken))
-		EnqueueTPCRep(pAd, pFr->Hdr.Addr2, DialogToken, TxPwr, LinkMargin);
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		TPC Report action frame handler.
-
-	Parametrs:
-		Elme - MLME message containing the received frame
-
-	Return	: None.
-	==========================================================================
- */
-static VOID PeerTpcRepAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UINT8 DialogToken;
-	TPC_REPORT_INFO TpcRepInfo;
-	PTPC_REQ_ENTRY pEntry = NULL;
-
-	NdisZeroMemory(&TpcRepInfo, sizeof(TPC_REPORT_INFO));
-	if (PeerTpcRepSanity(pAd, Elem->Msg, Elem->MsgLen, &DialogToken, &TpcRepInfo))
-	{
-		if ((pEntry = TpcReqLookUp(pAd, DialogToken)) != NULL)
-		{
-			TpcReqDelete(pAd, pEntry->DialogToken);
-			DBGPRINT(RT_DEBUG_TRACE, ("%s: DialogToken=%x, TxPwr=%d, LinkMargin=%d\n",
-				__FUNCTION__, DialogToken, TpcRepInfo.TxPwr, TpcRepInfo.LinkMargin));
-		}
-	}
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-		Spectrun action frames Handler such as channel switch annoucement,
-		measurement report, measurement request actions frames.
-
-	Parametrs:
-		Elme - MLME message containing the received frame
-
-	Return	: None.
-	==========================================================================
- */
-VOID PeerSpectrumAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-
-	UCHAR	Action = Elem->Msg[LENGTH_802_11+1];
-
-	if (pAd->CommonCfg.bIEEE80211H != TRUE)
-		return;
-
-	switch(Action)
-	{
-		case SPEC_MRQ:
-			// current rt2860 unable do such measure specified in Measurement Request.
-			// reject all measurement request.
-			PeerMeasureReqAction(pAd, Elem);
-			break;
-
-		case SPEC_MRP:
-			PeerMeasureReportAction(pAd, Elem);
-			break;
-
-		case SPEC_TPCRQ:
-			PeerTpcReqAction(pAd, Elem);
-			break;
-
-		case SPEC_TPCRP:
-			PeerTpcRepAction(pAd, Elem);
-			break;
-
-		case SPEC_CHANNEL_SWITCH:
-{
-#ifdef DOT11N_DRAFT3
-				SEC_CHA_OFFSET_IE	Secondary;
-				CHA_SWITCH_ANNOUNCE_IE	ChannelSwitch;
-
-				// 802.11h only has Channel Switch Announcement IE.
-				RTMPMoveMemory(&ChannelSwitch, &Elem->Msg[LENGTH_802_11+4], sizeof (CHA_SWITCH_ANNOUNCE_IE));
-
-				// 802.11n D3.03 adds secondary channel offset element in the end.
-				if (Elem->MsgLen ==  (LENGTH_802_11 + 2 + sizeof (CHA_SWITCH_ANNOUNCE_IE) + sizeof (SEC_CHA_OFFSET_IE)))
-				{
-					RTMPMoveMemory(&Secondary, &Elem->Msg[LENGTH_802_11+9], sizeof (SEC_CHA_OFFSET_IE));
-				}
-				else
-				{
-					Secondary.SecondaryChannelOffset = 0;
-				}
-
-				if ((Elem->Msg[LENGTH_802_11+2] == IE_CHANNEL_SWITCH_ANNOUNCEMENT) && (Elem->Msg[LENGTH_802_11+3] == 3))
-				{
-					ChannelSwitchAction(pAd, Elem->Wcid, ChannelSwitch.NewChannel, Secondary.SecondaryChannelOffset);
-				}
-#endif // DOT11N_DRAFT3 //
-}
-			PeerChSwAnnAction(pAd, Elem);
-			break;
-	}
-
-	return;
-}
-
-/*
-	==========================================================================
-	Description:
-
-	Parametrs:
-
-	Return	: None.
-	==========================================================================
- */
-INT Set_MeasureReq_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UINT Aid = 1;
-	UINT ArgIdx;
-	PUCHAR thisChar;
-
-	MEASURE_REQ_MODE MeasureReqMode;
-	UINT8 MeasureReqToken = RandomByte(pAd);
-	UINT8 MeasureReqType = RM_BASIC;
-	UINT8 MeasureCh = 1;
-
-	ArgIdx = 1;
-	while ((thisChar = strsep((char **)&arg, "-")) != NULL)
-	{
-		switch(ArgIdx)
-		{
-			case 1:	// Aid.
-				Aid = simple_strtol(thisChar, 0, 16);
-				break;
-
-			case 2: // Measurement Request Type.
-				MeasureReqType = simple_strtol(thisChar, 0, 16);
-				if (MeasureReqType > 3)
-				{
-					DBGPRINT(RT_DEBUG_ERROR, ("%s: unknow MeasureReqType(%d)\n", __FUNCTION__, MeasureReqType));
-					return TRUE;
-				}
-				break;
-
-			case 3: // Measurement channel.
-				MeasureCh = simple_strtol(thisChar, 0, 16);
-				break;
-		}
-		ArgIdx++;
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("%s::Aid = %d, MeasureReqType=%d MeasureCh=%d\n", __FUNCTION__, Aid, MeasureReqType, MeasureCh));
-	if (!VALID_WCID(Aid))
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("%s: unknow sta of Aid(%d)\n", __FUNCTION__, Aid));
-		return TRUE;
-	}
-
-	MeasureReqMode.word = 0;
-	MeasureReqMode.field.Enable = 1;
-
-	MeasureReqInsert(pAd, MeasureReqToken);
-
-	EnqueueMeasurementReq(pAd, pAd->MacTab.Content[Aid].Addr,
-		MeasureReqToken, MeasureReqMode.word, MeasureReqType, MeasureCh, 2000);
-
-	return TRUE;
-}
-
-INT Set_TpcReq_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UINT Aid;
-
-	UINT8 TpcReqToken = RandomByte(pAd);
-
-	Aid = simple_strtol(arg, 0, 16);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("%s::Aid = %d\n", __FUNCTION__, Aid));
-	if (!VALID_WCID(Aid))
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("%s: unknow sta of Aid(%d)\n", __FUNCTION__, Aid));
-		return TRUE;
-	}
-
-	TpcReqInsert(pAd, TpcReqToken);
-
-	EnqueueTPCReq(pAd, pAd->MacTab.Content[Aid].Addr, TpcReqToken);
-
-	return TRUE;
-}
-
+#include "../../rt2870/common/spectrum.c"
diff --git a/drivers/staging/rt3070/dfs.h b/drivers/staging/rt3070/dfs.h
index 752a6352d9d..b9c92e354f2 100644
--- a/drivers/staging/rt3070/dfs.h
+++ b/drivers/staging/rt3070/dfs.h
@@ -1,100 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-    dfs.h
-
-    Abstract:
-    Support DFS function.
-
-    Revision History:
-    Who       When            What
-    --------  ----------      ----------------------------------------------
-    Fonchi    03-12-2007      created
-*/
-
-#define RADAR_PULSE 1
-#define RADAR_WIDTH 2
-
-#define WIDTH_RD_IDLE 0
-#define WIDTH_RD_CHECK 1
-
-
-VOID BbpRadarDetectionStart(
-	IN PRTMP_ADAPTER pAd);
-
-VOID BbpRadarDetectionStop(
-	IN PRTMP_ADAPTER pAd);
-
-VOID RadarDetectionStart(
-	IN PRTMP_ADAPTER pAd,
-	IN BOOLEAN CTS_Protect,
-	IN UINT8 CTSPeriod);
-
-VOID RadarDetectionStop(
-	IN PRTMP_ADAPTER	pAd);
-
-VOID RadarDetectPeriodic(
-	IN PRTMP_ADAPTER	pAd);
-
-
-BOOLEAN RadarChannelCheck(
-	IN PRTMP_ADAPTER	pAd,
-	IN UCHAR			Ch);
-
-ULONG JapRadarType(
-	IN PRTMP_ADAPTER pAd);
-
-ULONG RTMPBbpReadRadarDuration(
-	IN PRTMP_ADAPTER	pAd);
-
-ULONG RTMPReadRadarDuration(
-	IN PRTMP_ADAPTER	pAd);
-
-VOID RTMPCleanRadarDuration(
-	IN PRTMP_ADAPTER	pAd);
-
-VOID RTMPPrepareRDCTSFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pDA,
-	IN	ULONG			Duration,
-	IN  UCHAR           RTSRate,
-	IN  ULONG           CTSBaseAddr,
-	IN  UCHAR			FrameGap);
-
-VOID RTMPPrepareRadarDetectParams(
-	IN PRTMP_ADAPTER	pAd);
-
-
-INT Set_ChMovingTime_Proc(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR arg);
-
-INT Set_LongPulseRadarTh_Proc(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR arg);
-
-
+#include "../rt2870/dfs.h"
diff --git a/drivers/staging/rt3070/leap.h b/drivers/staging/rt3070/leap.h
deleted file mode 100644
index 6818c1ff4d7..00000000000
--- a/drivers/staging/rt3070/leap.h
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	leap.h
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Name		Date			Modification logs
-*/
-#ifndef __LEAP_H__
-#define __LEAP_H__
-
-// Messages for Associate state machine
-#define LEAP_MACHINE_BASE                   30
-
-#define LEAP_MSG_REQUEST_IDENTITY           31
-#define LEAP_MSG_REQUEST_LEAP               32
-#define LEAP_MSG_SUCCESS                    33
-#define LEAP_MSG_FAILED                     34
-#define LEAP_MSG_RESPONSE_LEAP              35
-#define LEAP_MSG_EAPOLKEY                   36
-#define LEAP_MSG_UNKNOWN                    37
-#define LEAP_MSG                            38
-//! assoc state-machine states
-#define LEAP_IDLE                           0
-#define LEAP_WAIT_IDENTITY_REQUEST          1
-#define LEAP_WAIT_CHANLLENGE_REQUEST        2
-#define LEAP_WAIT_SUCCESS                   3
-#define LEAP_WAIT_CHANLLENGE_RESPONSE       4
-#define LEAP_WAIT_EAPOLKEY                  5
-
-#define LEAP_REASON_INVALID_AUTH                    0x01
-#define LEAP_REASON_AUTH_TIMEOUT                    0x02
-#define LEAP_REASON_CHALLENGE_FROM_AP_FAILED        0x03
-#define LEAP_REASON_CHALLENGE_TO_AP_FAILED          0x04
-
-#define CISCO_AuthModeLEAP                          0x80
-#define CISCO_AuthModeLEAPNone                      0x00
-#define LEAP_AUTH_TIMEOUT                           30000
-#define LEAP_CHALLENGE_RESPONSE_LENGTH              24
-#define LEAP_CHALLENGE_REQUEST_LENGTH               8
-
-typedef struct _LEAP_EAPOL_HEADER_ {
-    UCHAR       Version;
-    UCHAR       Type;
-    UCHAR       Length[2];
-} LEAP_EAPOL_HEADER, *PLEAP_EAPOL_HEADER;
-
-typedef struct _LEAP_EAPOL_PACKET_ {
-    UCHAR       Code;
-    UCHAR       Identifier;
-    UCHAR       Length[2];
-    UCHAR       Type;
-} LEAP_EAPOL_PACKET, *PLEAP_EAPOL_PACKET;
-
-typedef struct _LEAP_EAP_CONTENTS_ {
-    UCHAR       Version;
-    UCHAR       Reserved;
-    UCHAR       Length;
-} LEAP_EAP_CONTENTS, *PLEAP_EAP_CONTENTS;
-
-/*** EAPOL key ***/
-typedef struct _EAPOL_KEY_HEADER_ {
-    UCHAR       Type;
-    UCHAR       Length[2];
-    UCHAR       Counter[8];
-    UCHAR       IV[16];
-    UCHAR       Index;
-    UCHAR       Signature[16];
-} EAPOL_KEY_HEADER, *PEAPOL_KEY_HEADER;
-
-BOOLEAN LeapMsgTypeSubst(
-    IN  UCHAR   EAPType,
-    OUT ULONG   *MsgType);
-
-VOID LeapMachinePerformAction(
-    IN PRTMP_ADAPTER    pAd,
-    IN STATE_MACHINE    *S,
-    IN MLME_QUEUE_ELEM  *Elem);
-
-VOID LeapMacHeaderInit(
-    IN  PRTMP_ADAPTER       pAd,
-    IN  OUT PHEADER_802_11  pHdr80211,
-    IN  UCHAR               wep,
-    IN  PUCHAR              pAddr3);
-
-VOID LeapStartAction(
-    IN PRTMP_ADAPTER    pAd,
-    IN MLME_QUEUE_ELEM  *Elem);
-
-VOID LeapIdentityAction(
-    IN PRTMP_ADAPTER    pAd,
-    IN MLME_QUEUE_ELEM  *Elem);
-
-VOID LeapPeerChallengeAction(
-    IN PRTMP_ADAPTER    pAd,
-    IN MLME_QUEUE_ELEM  *Elem);
-
-VOID HashPwd(
-    IN  PUCHAR  pwd,
-    IN  INT     pwdlen,
-    OUT PUCHAR  hash);
-
-VOID PeerChallengeResponse(
-    IN  PUCHAR  szChallenge,
-    IN  PUCHAR  smbPasswd,
-    OUT PUCHAR  szResponse);
-
-VOID ParityKey(
-    OUT PUCHAR  szOut,
-    IN  PUCHAR  szIn);
-
-VOID DesKey(
-    OUT ULONG   k[16][2],
-    IN  PUCHAR  key,
-    IN  INT     decrypt);
-
-VOID Des(
-    IN  ULONG   ks[16][2],
-    OUT UCHAR   block[8]);
-
-VOID DesEncrypt(
-    IN  PUCHAR  szClear,
-    IN  PUCHAR  szKey,
-    OUT PUCHAR  szOut);
-
-VOID LeapNetworkChallengeAction(
-    IN PRTMP_ADAPTER    pAd,
-    IN MLME_QUEUE_ELEM  *Elem);
-
-VOID LeapNetworkChallengeResponse(
-    IN PRTMP_ADAPTER    pAd,
-    IN MLME_QUEUE_ELEM  *Elem);
-
-VOID HashpwdHash(
-    IN  PUCHAR  hash,
-    IN  PUCHAR  hashhash);
-
-VOID ProcessSessionKey(
-    OUT PUCHAR  SessionKey,
-    IN  PUCHAR  hash2,
-    IN  PUCHAR  ChallengeToRadius,
-    IN  PUCHAR  ChallengeResponseFromRadius,
-    IN  PUCHAR  ChallengeFromRadius,
-    IN  PUCHAR  ChallengeResponseToRadius);
-
-VOID LeapEapolKeyAction(
-    IN PRTMP_ADAPTER    pAd,
-    IN MLME_QUEUE_ELEM  *Elem);
-
-VOID RogueApTableInit(
-    IN ROGUEAP_TABLE    *Tab);
-
-ULONG RogueApTableSearch(
-    IN ROGUEAP_TABLE    *Tab,
-    IN PUCHAR           pAddr);
-
-VOID RogueApEntrySet(
-    IN  PRTMP_ADAPTER   pAd,
-    OUT ROGUEAP_ENTRY   *pRogueAp,
-    IN PUCHAR           pAddr,
-    IN UCHAR            FaileCode);
-
-ULONG RogueApTableSetEntry(
-    IN  PRTMP_ADAPTER   pAd,
-    OUT ROGUEAP_TABLE  *Tab,
-    IN PUCHAR           pAddr,
-    IN UCHAR            FaileCode);
-
-VOID RogueApTableDeleteEntry(
-    IN OUT ROGUEAP_TABLE *Tab,
-    IN PUCHAR          pAddr);
-
-VOID LeapAuthTimeout(
-    IN PVOID SystemSpecific1,
-    IN PVOID FunctionContext,
-    IN PVOID SystemSpecific2,
-    IN PVOID SystemSpecific3);
-
-VOID LeapSendRogueAPReport(
-    IN  PRTMP_ADAPTER   pAd);
-
-BOOLEAN CCKMAssocRspSanity(
-    IN PRTMP_ADAPTER    pAd,
-    IN VOID             *Msg,
-    IN ULONG            MsgLen);
-
-#endif  // __LEAP_H__
diff --git a/drivers/staging/rt3070/link_list.h b/drivers/staging/rt3070/link_list.h
index f6521133fd5..5550b2f4516 100644
--- a/drivers/staging/rt3070/link_list.h
+++ b/drivers/staging/rt3070/link_list.h
@@ -1,134 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-#ifndef __LINK_LIST_H__
-#define __LINK_LIST_H__
-
-typedef struct _LIST_ENTRY
-{
-	struct _LIST_ENTRY *pNext;
-} LIST_ENTRY, *PLIST_ENTRY;
-
-typedef struct _LIST_HEADR
-{
-	PLIST_ENTRY pHead;
-	PLIST_ENTRY pTail;
-	UCHAR size;
-} LIST_HEADER, *PLIST_HEADER;
-
-static inline VOID initList(
-	IN PLIST_HEADER pList)
-{
-	pList->pHead = pList->pTail = NULL;
-	pList->size = 0;
-	return;
-}
-
-static inline VOID insertTailList(
-	IN PLIST_HEADER pList,
-	IN PLIST_ENTRY pEntry)
-{
-	pEntry->pNext = NULL;
-	if (pList->pTail)
-		pList->pTail->pNext = pEntry;
-	else
-		pList->pHead = pEntry;
-	pList->pTail = pEntry;
-	pList->size++;
-
-	return;
-}
-
-static inline PLIST_ENTRY removeHeadList(
-	IN PLIST_HEADER pList)
-{
-	PLIST_ENTRY pNext;
-	PLIST_ENTRY pEntry;
-
-	pEntry = pList->pHead;
-	if (pList->pHead != NULL)
-	{
-		pNext = pList->pHead->pNext;
-		pList->pHead = pNext;
-		if (pNext == NULL)
-			pList->pTail = NULL;
-		pList->size--;
-	}
-	return pEntry;
-}
-
-static inline int getListSize(
-	IN PLIST_HEADER pList)
-{
-	return pList->size;
-}
-
-static inline PLIST_ENTRY delEntryList(
-	IN PLIST_HEADER pList,
-	IN PLIST_ENTRY pEntry)
-{
-	PLIST_ENTRY pCurEntry;
-	PLIST_ENTRY pPrvEntry;
-
-	if(pList->pHead == NULL)
-		return NULL;
-
-	if(pEntry == pList->pHead)
-	{
-		pCurEntry = pList->pHead;
-		pList->pHead = pCurEntry->pNext;
-
-		if(pList->pHead == NULL)
-			pList->pTail = NULL;
-
-		pList->size--;
-		return pCurEntry;
-	}
-
-	pPrvEntry = pList->pHead;
-	pCurEntry = pPrvEntry->pNext;
-	while(pCurEntry != NULL)
-	{
-		if (pEntry == pCurEntry)
-		{
-			pPrvEntry->pNext = pCurEntry->pNext;
-
-			if(pEntry == pList->pTail)
-				pList->pTail = pPrvEntry;
-
-			pList->size--;
-			break;
-		}
-		pPrvEntry = pCurEntry;
-		pCurEntry = pPrvEntry->pNext;
-	}
-
-	return pCurEntry;
-}
-
-#endif // ___LINK_LIST_H__ //
-
+#include "../rt2870/link_list.h"
diff --git a/drivers/staging/rt3070/md5.h b/drivers/staging/rt3070/md5.h
index d85db12170d..1042a994dc7 100644
--- a/drivers/staging/rt3070/md5.h
+++ b/drivers/staging/rt3070/md5.h
@@ -1,107 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	md5.h
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Name		Date			Modification logs
-	jan			10-28-03		Initial
-	Rita    	11-23-04		Modify MD5 and SHA-1
-*/
-
-#ifndef	uint8
-#define	uint8  unsigned	char
-#endif
-
-#ifndef	uint32
-#define	uint32 unsigned	long int
-#endif
-
-
-#ifndef	__MD5_H__
-#define	__MD5_H__
-
-#define MD5_MAC_LEN 16
-
-typedef struct _MD5_CTX {
-    UINT32   Buf[4];             // buffers of four states
-	UCHAR   Input[64];          // input message
-	UINT32   LenInBitCount[2];   // length counter for input message, 0 up to 64 bits
-}   MD5_CTX;
-
-VOID MD5Init(MD5_CTX *pCtx);
-VOID MD5Update(MD5_CTX *pCtx, UCHAR *pData, UINT32 LenInBytes);
-VOID MD5Final(UCHAR Digest[16], MD5_CTX *pCtx);
-VOID MD5Transform(UINT32 Buf[4], UINT32 Mes[16]);
-
-void md5_mac(u8 *key, size_t key_len, u8 *data, size_t data_len, u8 *mac);
-void hmac_md5(u8 *key, size_t key_len, u8 *data, size_t data_len, u8 *mac);
-
-//
-// SHA context
-//
-typedef	struct _SHA_CTX
-{
-	UINT32   Buf[5];             // buffers of five states
-	UCHAR   Input[80];          // input message
-	UINT32   LenInBitCount[2];   // length counter for input message, 0 up to 64 bits
-
-}	SHA_CTX;
-
-VOID SHAInit(SHA_CTX *pCtx);
-UCHAR SHAUpdate(SHA_CTX *pCtx, UCHAR *pData, UINT32 LenInBytes);
-VOID SHAFinal(SHA_CTX *pCtx, UCHAR Digest[20]);
-VOID SHATransform(UINT32 Buf[5], UINT32 Mes[20]);
-
-#define SHA_DIGEST_LEN 20
-#endif // __MD5_H__
-
-/******************************************************************************/
-#ifndef	_AES_H
-#define	_AES_H
-
-typedef	struct
-{
-	uint32 erk[64];		/* encryption round	keys */
-	uint32 drk[64];		/* decryption round	keys */
-	int	nr;				/* number of rounds	*/
-}
-aes_context;
-
-int	 rtmp_aes_set_key( aes_context *ctx,	uint8 *key,	int	nbits );
-void rtmp_aes_encrypt( aes_context *ctx,	uint8 input[16], uint8 output[16] );
-void rtmp_aes_decrypt( aes_context *ctx,	uint8 input[16], uint8 output[16] );
-
-void F(char *password, unsigned char *ssid, int ssidlength, int iterations, int count, unsigned char *output);
-int PasswordHash(char *password, unsigned char *ssid, int ssidlength, unsigned char *output);
-
-#endif /* aes.h	*/
-
+#include "../rt2870/md5.h"
diff --git a/drivers/staging/rt3070/mlme.h b/drivers/staging/rt3070/mlme.h
index b0035e1fa8e..773c0edfcea 100644
--- a/drivers/staging/rt3070/mlme.h
+++ b/drivers/staging/rt3070/mlme.h
@@ -1,1468 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	mlme.h
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	John Chang	2003-08-28		Created
-	John Chang  2004-09-06      modified for RT2600
-
-*/
-#ifndef __MLME_H__
-#define __MLME_H__
-
-//extern UCHAR BROADCAST_ADDR[];
-
-// maximum supported capability information -
-// ESS, IBSS, Privacy, Short Preamble, Spectrum mgmt, Short Slot
-#define SUPPORTED_CAPABILITY_INFO   0x0533
-
-#define END_OF_ARGS                 -1
-#define LFSR_MASK                   0x80000057
-#define MLME_TASK_EXEC_INTV         100/*200*/       //
-#define LEAD_TIME                   5
-#define MLME_TASK_EXEC_MULTIPLE       10  /*5*/       // MLME_TASK_EXEC_MULTIPLE * MLME_TASK_EXEC_INTV = 1 sec
-#define REORDER_EXEC_INTV         	100       // 0.1 sec
-//#define TBTT_PRELOAD_TIME         384        // usec. LomgPreamble + 24-byte at 1Mbps
-
-// The definition of Radar detection duration region
-#define CE		0
-#define FCC		1
-#define JAP		2
-#define JAP_W53	3
-#define JAP_W56	4
-#define MAX_RD_REGION 5
-
-#ifdef	NDIS51_MINIPORT
-#define BEACON_LOST_TIME            4000       // 2048 msec = 2 sec
-#else
-#define BEACON_LOST_TIME            4 * OS_HZ    // 2048 msec = 2 sec
-#endif
-
-#define DLS_TIMEOUT                 1200      // unit: msec
-#define AUTH_TIMEOUT                300       // unit: msec
-#define ASSOC_TIMEOUT               300       // unit: msec
-#define JOIN_TIMEOUT                2 * OS_HZ      // unit: msec
-#define SHORT_CHANNEL_TIME          90        // unit: msec
-#define MIN_CHANNEL_TIME            110        // unit: msec, for dual band scan
-#define MAX_CHANNEL_TIME            140       // unit: msec, for single band scan
-#define	FAST_ACTIVE_SCAN_TIME	    30 		  // Active scan waiting for probe response time
-#define CW_MIN_IN_BITS              4         // actual CwMin = 2^CW_MIN_IN_BITS - 1
-
-
-#ifdef CONFIG_STA_SUPPORT
-#ifndef CONFIG_AP_SUPPORT
-#define CW_MAX_IN_BITS              10        // actual CwMax = 2^CW_MAX_IN_BITS - 1
-#endif
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef CONFIG_APSTA_MIXED_SUPPORT
-extern UINT32 CW_MAX_IN_BITS;
-#endif // CONFIG_APSTA_MIXED_SUPPORT //
-
-// Note: RSSI_TO_DBM_OFFSET has been changed to variable for new RF (2004-0720).
-// SHould not refer to this constant anymore
-//#define RSSI_TO_DBM_OFFSET          120 // for RT2530 RSSI-115 = dBm
-#define RSSI_FOR_MID_TX_POWER       -55  // -55 db is considered mid-distance
-#define RSSI_FOR_LOW_TX_POWER       -45  // -45 db is considered very short distance and
-                                        // eligible to use a lower TX power
-#define RSSI_FOR_LOWEST_TX_POWER    -30
-//#define MID_TX_POWER_DELTA          0   // 0 db from full TX power upon mid-distance to AP
-#define LOW_TX_POWER_DELTA          6    // -3 db from full TX power upon very short distance. 1 grade is 0.5 db
-#define LOWEST_TX_POWER_DELTA       16   // -8 db from full TX power upon shortest distance. 1 grade is 0.5 db
-
-#define RSSI_TRIGGERED_UPON_BELOW_THRESHOLD     0
-#define RSSI_TRIGGERED_UPON_EXCCEED_THRESHOLD   1
-#define RSSI_THRESHOLD_FOR_ROAMING              25
-#define RSSI_DELTA                              5
-
-// Channel Quality Indication
-#define CQI_IS_GOOD(cqi)            ((cqi) >= 50)
-//#define CQI_IS_FAIR(cqi)          (((cqi) >= 20) && ((cqi) < 50))
-#define CQI_IS_POOR(cqi)            (cqi < 50)  //(((cqi) >= 5) && ((cqi) < 20))
-#define CQI_IS_BAD(cqi)             (cqi < 5)
-#define CQI_IS_DEAD(cqi)            (cqi == 0)
-
-// weighting factor to calculate Channel quality, total should be 100%
-#define RSSI_WEIGHTING                   50
-#define TX_WEIGHTING                     30
-#define RX_WEIGHTING                     20
-
-//#define PEER_KEY_NOT_USED                0
-//#define PEER_KEY_64_BIT                  64
-//#define PEER_KEY_128_BIT                 128
-
-//#define PEER_KEY_64BIT_LEN               8
-//#define PEER_KEY_128BIT_LEN              16
-
-#define BSS_NOT_FOUND                    0xFFFFFFFF
-
-
-#ifdef CONFIG_STA_SUPPORT
-#define MAX_LEN_OF_MLME_QUEUE            40 //10
-#endif // CONFIG_STA_SUPPORT //
-
-#define SCAN_PASSIVE                     18		// scan with no probe request, only wait beacon and probe response
-#define SCAN_ACTIVE                      19		// scan with probe request, and wait beacon and probe response
-#define	SCAN_CISCO_PASSIVE				 20		// Single channel passive scan
-#define	SCAN_CISCO_ACTIVE				 21		// Single channel active scan
-#define	SCAN_CISCO_NOISE				 22		// Single channel passive scan for noise histogram collection
-#define	SCAN_CISCO_CHANNEL_LOAD			 23		// Single channel passive scan for channel load collection
-#define FAST_SCAN_ACTIVE                 24		// scan with probe request, and wait beacon and probe response
-
-#ifdef DOT11N_DRAFT3
-#define SCAN_2040_BSS_COEXIST                  26
-#endif // DOT11N_DRAFT3 //
-
-//#define BSS_TABLE_EMPTY(x)             ((x).BssNr == 0)
-#define MAC_ADDR_IS_GROUP(Addr)       (((Addr[0]) & 0x01))
-#define MAC_ADDR_HASH(Addr)            (Addr[0] ^ Addr[1] ^ Addr[2] ^ Addr[3] ^ Addr[4] ^ Addr[5])
-#define MAC_ADDR_HASH_INDEX(Addr)      (MAC_ADDR_HASH(Addr) % HASH_TABLE_SIZE)
-#define TID_MAC_HASH(Addr,TID)            (TID^Addr[0] ^ Addr[1] ^ Addr[2] ^ Addr[3] ^ Addr[4] ^ Addr[5])
-#define TID_MAC_HASH_INDEX(Addr,TID)      (TID_MAC_HASH(Addr,TID) % HASH_TABLE_SIZE)
-
-// LED Control
-// assoiation ON. one LED ON. another blinking when TX, OFF when idle
-// no association, both LED off
-#define ASIC_LED_ACT_ON(pAd)        RTMP_IO_WRITE32(pAd, MAC_CSR14, 0x00031e46)
-#define ASIC_LED_ACT_OFF(pAd)       RTMP_IO_WRITE32(pAd, MAC_CSR14, 0x00001e46)
-
-// bit definition of the 2-byte pBEACON->Capability field
-#define CAP_IS_ESS_ON(x)                 (((x) & 0x0001) != 0)
-#define CAP_IS_IBSS_ON(x)                (((x) & 0x0002) != 0)
-#define CAP_IS_CF_POLLABLE_ON(x)         (((x) & 0x0004) != 0)
-#define CAP_IS_CF_POLL_REQ_ON(x)         (((x) & 0x0008) != 0)
-#define CAP_IS_PRIVACY_ON(x)             (((x) & 0x0010) != 0)
-#define CAP_IS_SHORT_PREAMBLE_ON(x)      (((x) & 0x0020) != 0)
-#define CAP_IS_PBCC_ON(x)                (((x) & 0x0040) != 0)
-#define CAP_IS_AGILITY_ON(x)             (((x) & 0x0080) != 0)
-#define CAP_IS_SPECTRUM_MGMT(x)          (((x) & 0x0100) != 0)  // 802.11e d9
-#define CAP_IS_QOS(x)                    (((x) & 0x0200) != 0)  // 802.11e d9
-#define CAP_IS_SHORT_SLOT(x)             (((x) & 0x0400) != 0)
-#define CAP_IS_APSD(x)                   (((x) & 0x0800) != 0)  // 802.11e d9
-#define CAP_IS_IMMED_BA(x)               (((x) & 0x1000) != 0)  // 802.11e d9
-#define CAP_IS_DSSS_OFDM(x)              (((x) & 0x2000) != 0)
-#define CAP_IS_DELAY_BA(x)               (((x) & 0x4000) != 0)  // 802.11e d9
-
-#define CAP_GENERATE(ess,ibss,priv,s_pre,s_slot,spectrum)  (((ess) ? 0x0001 : 0x0000) | ((ibss) ? 0x0002 : 0x0000) | ((priv) ? 0x0010 : 0x0000) | ((s_pre) ? 0x0020 : 0x0000) | ((s_slot) ? 0x0400 : 0x0000) | ((spectrum) ? 0x0100 : 0x0000))
-
-//#define STA_QOS_CAPABILITY               0 // 1-byte. see 802.11e d9.0 for bit definition
-
-#define ERP_IS_NON_ERP_PRESENT(x)        (((x) & 0x01) != 0)    // 802.11g
-#define ERP_IS_USE_PROTECTION(x)         (((x) & 0x02) != 0)    // 802.11g
-#define ERP_IS_USE_BARKER_PREAMBLE(x)    (((x) & 0x04) != 0)    // 802.11g
-
-#define DRS_TX_QUALITY_WORST_BOUND       8// 3  // just test by gary
-#define DRS_PENALTY                      8
-
-#define BA_NOTUSE 	2
-//BA Policy subfiled value in ADDBA frame
-#define IMMED_BA 	1
-#define DELAY_BA	0
-
-// BA Initiator subfield in DELBA frame
-#define ORIGINATOR	1
-#define RECIPIENT	0
-
-// ADDBA Status Code
-#define ADDBA_RESULTCODE_SUCCESS					0
-#define ADDBA_RESULTCODE_REFUSED					37
-#define ADDBA_RESULTCODE_INVALID_PARAMETERS			38
-
-// DELBA Reason Code
-#define DELBA_REASONCODE_QSTA_LEAVING				36
-#define DELBA_REASONCODE_END_BA						37
-#define DELBA_REASONCODE_UNKNOWN_BA					38
-#define DELBA_REASONCODE_TIMEOUT					39
-
-// reset all OneSecTx counters
-#define RESET_ONE_SEC_TX_CNT(__pEntry) \
-if (((__pEntry)) != NULL) \
-{ \
-	(__pEntry)->OneSecTxRetryOkCount = 0; \
-	(__pEntry)->OneSecTxFailCount = 0; \
-	(__pEntry)->OneSecTxNoRetryOkCount = 0; \
-}
-
-//
-// 802.11 frame formats
-//
-//  HT Capability INFO field in HT Cap IE .
-typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-	USHORT	LSIGTxopProSup:1;
-	USHORT	Forty_Mhz_Intolerant:1;
-	USHORT	PSMP:1;
-	USHORT	CCKmodein40:1;
-	USHORT	AMsduSize:1;
-	USHORT	DelayedBA:1;	//rt2860c not support
-	USHORT	RxSTBC:2;
-	USHORT	TxSTBC:1;
-	USHORT	ShortGIfor40:1;	//for40MHz
-	USHORT	ShortGIfor20:1;
-	USHORT	GF:1;	//green field
-	USHORT	MimoPs:2;//momi power safe
-	USHORT	ChannelWidth:1;
-	USHORT	AdvCoding:1;
-#else
-	USHORT	AdvCoding:1;
-	USHORT	ChannelWidth:1;
-	USHORT	MimoPs:2;//momi power safe
-	USHORT	GF:1;	//green field
-	USHORT	ShortGIfor20:1;
-	USHORT	ShortGIfor40:1;	//for40MHz
-	USHORT	TxSTBC:1;
-	USHORT	RxSTBC:2;
-	USHORT	DelayedBA:1;	//rt2860c not support
-	USHORT	AMsduSize:1;	// only support as zero
-	USHORT	CCKmodein40:1;
-	USHORT	PSMP:1;
-	USHORT	Forty_Mhz_Intolerant:1;
-	USHORT	LSIGTxopProSup:1;
-#endif	/* !RT_BIG_ENDIAN */
-} HT_CAP_INFO, *PHT_CAP_INFO;
-
-//  HT Capability INFO field in HT Cap IE .
-typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-	UCHAR	rsv:3;//momi power safe
-	UCHAR	MpduDensity:3;
-	UCHAR	MaxRAmpduFactor:2;
-#else
-	UCHAR	MaxRAmpduFactor:2;
-	UCHAR	MpduDensity:3;
-	UCHAR	rsv:3;//momi power safe
-#endif /* !RT_BIG_ENDIAN */
-} HT_CAP_PARM, *PHT_CAP_PARM;
-
-//  HT Capability INFO field in HT Cap IE .
-typedef struct PACKED {
-	UCHAR	MCSSet[10];
-	UCHAR	SupRate[2];  // unit : 1Mbps
-#ifdef RT_BIG_ENDIAN
-	UCHAR	rsv:3;
-	UCHAR	MpduDensity:1;
-	UCHAR	TxStream:2;
-	UCHAR	TxRxNotEqual:1;
-	UCHAR	TxMCSSetDefined:1;
-#else
-	UCHAR	TxMCSSetDefined:1;
-	UCHAR	TxRxNotEqual:1;
-	UCHAR	TxStream:2;
-	UCHAR	MpduDensity:1;
-	UCHAR	rsv:3;
-#endif // RT_BIG_ENDIAN //
-	UCHAR	rsv3[3];
-} HT_MCS_SET, *PHT_MCS_SET;
-
-//  HT Capability INFO field in HT Cap IE .
-typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-	USHORT	rsv2:4;
-	USHORT	RDGSupport:1;	//reverse Direction Grant  support
-	USHORT	PlusHTC:1;	//+HTC control field support
-	USHORT	MCSFeedback:2;	//0:no MCS feedback, 2:unsolicited MCS feedback, 3:Full MCS feedback,  1:rsv.
-	USHORT	rsv:5;//momi power safe
-	USHORT	TranTime:2;
-	USHORT	Pco:1;
-#else
-	USHORT	Pco:1;
-	USHORT	TranTime:2;
-	USHORT	rsv:5;//momi power safe
-	USHORT	MCSFeedback:2;	//0:no MCS feedback, 2:unsolicited MCS feedback, 3:Full MCS feedback,  1:rsv.
-	USHORT	PlusHTC:1;	//+HTC control field support
-	USHORT	RDGSupport:1;	//reverse Direction Grant  support
-	USHORT	rsv2:4;
-#endif /* RT_BIG_ENDIAN */
-} EXT_HT_CAP_INFO, *PEXT_HT_CAP_INFO;
-
-//  HT Beamforming field in HT Cap IE .
-typedef struct PACKED _HT_BF_CAP{
-#ifdef RT_BIG_ENDIAN
-	ULONG	rsv:3;
-	ULONG	ChanEstimation:2;
-	ULONG	CSIRowBFSup:2;
-	ULONG	ComSteerBFAntSup:2;
-	ULONG	NoComSteerBFAntSup:2;
-	ULONG	CSIBFAntSup:2;
-	ULONG	MinGrouping:2;
-	ULONG	ExpComBF:2;
-	ULONG	ExpNoComBF:2;
-	ULONG	ExpCSIFbk:2;
-	ULONG	ExpComSteerCapable:1;
-	ULONG	ExpNoComSteerCapable:1;
-	ULONG	ExpCSICapable:1;
-	ULONG	Calibration:2;
-	ULONG	ImpTxBFCapable:1;
-	ULONG	TxNDPCapable:1;
-	ULONG	RxNDPCapable:1;
-	ULONG	TxSoundCapable:1;
-	ULONG	RxSoundCapable:1;
-	ULONG	TxBFRecCapable:1;
-#else
-	ULONG	TxBFRecCapable:1;
-	ULONG	RxSoundCapable:1;
-	ULONG	TxSoundCapable:1;
-	ULONG	RxNDPCapable:1;
-	ULONG	TxNDPCapable:1;
-	ULONG	ImpTxBFCapable:1;
-	ULONG	Calibration:2;
-	ULONG	ExpCSICapable:1;
-	ULONG	ExpNoComSteerCapable:1;
-	ULONG	ExpComSteerCapable:1;
-	ULONG	ExpCSIFbk:2;
-	ULONG	ExpNoComBF:2;
-	ULONG	ExpComBF:2;
-	ULONG	MinGrouping:2;
-	ULONG	CSIBFAntSup:2;
-	ULONG	NoComSteerBFAntSup:2;
-	ULONG	ComSteerBFAntSup:2;
-	ULONG	CSIRowBFSup:2;
-	ULONG	ChanEstimation:2;
-	ULONG	rsv:3;
-#endif // RT_BIG_ENDIAN //
-} HT_BF_CAP, *PHT_BF_CAP;
-
-//  HT antenna selection field in HT Cap IE .
-typedef struct PACKED _HT_AS_CAP{
-#ifdef RT_BIG_ENDIAN
-	UCHAR	rsv:1;
-	UCHAR	TxSoundPPDU:1;
-	UCHAR	RxASel:1;
-	UCHAR	AntIndFbk:1;
-	UCHAR	ExpCSIFbk:1;
-	UCHAR	AntIndFbkTxASEL:1;
-	UCHAR	ExpCSIFbkTxASEL:1;
-	UCHAR	AntSelect:1;
-#else
-	UCHAR	AntSelect:1;
-	UCHAR	ExpCSIFbkTxASEL:1;
-	UCHAR	AntIndFbkTxASEL:1;
-	UCHAR	ExpCSIFbk:1;
-	UCHAR	AntIndFbk:1;
-	UCHAR	RxASel:1;
-	UCHAR	TxSoundPPDU:1;
-	UCHAR	rsv:1;
-#endif // RT_BIG_ENDIAN //
-} HT_AS_CAP, *PHT_AS_CAP;
-
-// Draft 1.0 set IE length 26, but is extensible..
-#define SIZE_HT_CAP_IE		26
-// The structure for HT Capability IE.
-typedef struct PACKED _HT_CAPABILITY_IE{
-	HT_CAP_INFO		HtCapInfo;
-	HT_CAP_PARM		HtCapParm;
-//	HT_MCS_SET		HtMCSSet;
-	UCHAR			MCSSet[16];
-	EXT_HT_CAP_INFO	ExtHtCapInfo;
-	HT_BF_CAP		TxBFCap;	// beamforming cap. rt2860c not support beamforming.
-	HT_AS_CAP		ASCap;	//antenna selection.
-} HT_CAPABILITY_IE, *PHT_CAPABILITY_IE;
-
-
-// 802.11n draft3 related structure definitions.
-// 7.3.2.60
-#define dot11OBSSScanPassiveDwell							20	// in TU. min amount of time that the STA continously scans each channel when performing an active OBSS scan.
-#define dot11OBSSScanActiveDwell							10	// in TU.min amount of time that the STA continously scans each channel when performing an passive OBSS scan.
-#define dot11BSSWidthTriggerScanInterval					300  // in sec. max interval between scan operations to be performed to detect BSS channel width trigger events.
-#define dot11OBSSScanPassiveTotalPerChannel					200	// in TU. min total amount of time that the STA scans each channel when performing a passive OBSS scan.
-#define dot11OBSSScanActiveTotalPerChannel					20	//in TU. min total amount of time that the STA scans each channel when performing a active OBSS scan
-#define dot11BSSWidthChannelTransactionDelayFactor			5	// min ratio between the delay time in performing a switch from 20MHz BSS to 20/40 BSS operation and the maxima
-																//	interval between overlapping BSS scan operations.
-#define dot11BSSScanActivityThreshold						25	// in %%, max total time that a STA may be active on the medium during a period of
-																//	(dot11BSSWidthChannelTransactionDelayFactor * dot11BSSWidthTriggerScanInterval) seconds without
-																//	being obligated to perform OBSS Scan operations. default is 25(== 0.25%)
-
-typedef struct PACKED _OVERLAP_BSS_SCAN_IE{
-	USHORT		ScanPassiveDwell;
-	USHORT		ScanActiveDwell;
-	USHORT		TriggerScanInt;				// Trigger scan interval
-	USHORT		PassiveTalPerChannel;		// passive total per channel
-	USHORT		ActiveTalPerChannel;		// active total per channel
-	USHORT		DelayFactor;				// BSS width channel transition delay factor
-	USHORT		ScanActThre;				// Scan Activity threshold
-}OVERLAP_BSS_SCAN_IE, *POVERLAP_BSS_SCAN_IE;
-
-
-//  7.3.2.56. 20/40 Coexistence element used in  Element ID = 72 = IE_2040_BSS_COEXIST
-typedef union PACKED _BSS_2040_COEXIST_IE{
- struct PACKED {
- #ifdef RT_BIG_ENDIAN
-	UCHAR	rsv:5;
-	UCHAR	BSS20WidthReq:1;
-	UCHAR	Intolerant40:1;
-	UCHAR	InfoReq:1;
- #else
-	UCHAR	InfoReq:1;
-	UCHAR	Intolerant40:1;			// Inter-BSS. set 1 when prohibits a receiving BSS from operating as a 20/40 Mhz BSS.
-	UCHAR	BSS20WidthReq:1;		// Intra-BSS set 1 when prohibits a receiving AP from operating its BSS as a 20/40MHz BSS.
-	UCHAR	rsv:5;
-#endif // RT_BIG_ENDIAN //
-    } field;
- UCHAR   word;
-} BSS_2040_COEXIST_IE, *PBSS_2040_COEXIST_IE;
-
-
-typedef struct  _TRIGGER_EVENTA{
-	BOOLEAN			bValid;
-	UCHAR	BSSID[6];
-	UCHAR	RegClass;	// Regulatory Class
-	USHORT	Channel;
-	ULONG	CDCounter;   // Maintain a seperate count down counter for each Event A.
-} TRIGGER_EVENTA, *PTRIGGER_EVENTA;
-
-// 20/40 trigger event table
-// If one Event A delete or created, or if Event B is detected or not detected, STA should send 2040BSSCoexistence to AP.
-#define MAX_TRIGGER_EVENT		64
-typedef struct  _TRIGGER_EVENT_TAB{
-	UCHAR	EventANo;
-	TRIGGER_EVENTA	EventA[MAX_TRIGGER_EVENT];
-	ULONG			EventBCountDown;	// Count down counter for Event B.
-} TRIGGER_EVENT_TAB, *PTRIGGER_EVENT_TAB;
-
-// 7.3.27 20/40 Bss Coexistence Mgmt capability used in extended capabilities information IE( ID = 127 = IE_EXT_CAPABILITY).
-//	This is the first octet and was defined in 802.11n D3.03 and 802.11yD9.0
-typedef struct PACKED _EXT_CAP_INFO_ELEMENT{
-#ifdef RT_BIG_ENDIAN
-	UCHAR	rsv2:5;
-	UCHAR	ExtendChannelSwitch:1;
-	UCHAR	rsv:1;
-	UCHAR	BssCoexistMgmtSupport:1;
-#else
-	UCHAR	BssCoexistMgmtSupport:1;
-	UCHAR	rsv:1;
-	UCHAR	ExtendChannelSwitch:1;
-	UCHAR	rsv2:5;
-#endif // RT_BIG_ENDIAN //
-}EXT_CAP_INFO_ELEMENT, *PEXT_CAP_INFO_ELEMENT;
-
-
-// 802.11n 7.3.2.61
-typedef struct PACKED _BSS_2040_COEXIST_ELEMENT{
-	UCHAR					ElementID;		// ID = IE_2040_BSS_COEXIST = 72
-	UCHAR					Len;
-	BSS_2040_COEXIST_IE		BssCoexistIe;
-}BSS_2040_COEXIST_ELEMENT, *PBSS_2040_COEXIST_ELEMENT;
-
-
-//802.11n 7.3.2.59
-typedef struct PACKED _BSS_2040_INTOLERANT_CH_REPORT{
-	UCHAR				ElementID;		// ID = IE_2040_BSS_INTOLERANT_REPORT = 73
-	UCHAR				Len;
-	UCHAR				RegulatoryClass;
-	UCHAR				ChList[0];
-}BSS_2040_INTOLERANT_CH_REPORT, *PBSS_2040_INTOLERANT_CH_REPORT;
-
-
-// The structure for channel switch annoucement IE. This is in 802.11n D3.03
-typedef struct PACKED _CHA_SWITCH_ANNOUNCE_IE{
-	UCHAR			SwitchMode;	//channel switch mode
-	UCHAR			NewChannel;	//
-	UCHAR			SwitchCount;	//
-} CHA_SWITCH_ANNOUNCE_IE, *PCHA_SWITCH_ANNOUNCE_IE;
-
-
-// The structure for channel switch annoucement IE. This is in 802.11n D3.03
-typedef struct PACKED _SEC_CHA_OFFSET_IE{
-	UCHAR			SecondaryChannelOffset;	 // 1: Secondary above, 3: Secondary below, 0: no Secondary
-} SEC_CHA_OFFSET_IE, *PSEC_CHA_OFFSET_IE;
-
-
-// This structure is extracted from struct RT_HT_CAPABILITY
-typedef struct {
-	BOOLEAN			bHtEnable;	 // If we should use ht rate.
-	BOOLEAN			bPreNHt;	 // If we should use ht rate.
-	//Substract from HT Capability IE
-	UCHAR			MCSSet[16];	//only supoort MCS=0-15,32 ,
-} RT_HT_PHY_INFO, *PRT_HT_PHY_INFO;
-
-//This structure substracts ralink supports from all 802.11n-related features.
-//Features not listed here but contained in 802.11n spec are not supported in rt2860.
-typedef struct {
-#ifdef RT_BIG_ENDIAN
-	USHORT	rsv:5;
-	USHORT	AmsduSize:1;	// Max receiving A-MSDU size
-	USHORT	AmsduEnable:1;	// Enable to transmit A-MSDU. Suggest disable. We should use A-MPDU to gain best benifit of 802.11n
-	USHORT	RxSTBC:2;	// 2 bits
-	USHORT	TxSTBC:1;
-	USHORT	ShortGIfor40:1;	//for40MHz
-	USHORT	ShortGIfor20:1;
-	USHORT	GF:1;	//green field
-	USHORT	MimoPs:2;//mimo power safe MMPS_
-	USHORT	ChannelWidth:1;
-#else
-	USHORT	ChannelWidth:1;
-	USHORT	MimoPs:2;//mimo power safe MMPS_
-	USHORT	GF:1;	//green field
-	USHORT	ShortGIfor20:1;
-	USHORT	ShortGIfor40:1;	//for40MHz
-	USHORT	TxSTBC:1;
-	USHORT	RxSTBC:2;	// 2 bits
-	USHORT	AmsduEnable:1;	// Enable to transmit A-MSDU. Suggest disable. We should use A-MPDU to gain best benifit of 802.11n
-	USHORT	AmsduSize:1;	// Max receiving A-MSDU size
-	USHORT	rsv:5;
-#endif
-
-	//Substract from Addiont HT INFO IE
-#ifdef RT_BIG_ENDIAN
-	UCHAR	RecomWidth:1;
-	UCHAR	ExtChanOffset:2;	// Please not the difference with following 	UCHAR	NewExtChannelOffset; from 802.11n
-	UCHAR	MpduDensity:3;
-	UCHAR	MaxRAmpduFactor:2;
-#else
-	UCHAR	MaxRAmpduFactor:2;
-	UCHAR	MpduDensity:3;
-	UCHAR	ExtChanOffset:2;	// Please not the difference with following 	UCHAR	NewExtChannelOffset; from 802.11n
-	UCHAR	RecomWidth:1;
-#endif
-
-#ifdef RT_BIG_ENDIAN
-	USHORT	rsv2:11;
-	USHORT	OBSS_NonHTExist:1;
-	USHORT	rsv3:1;
-	USHORT	NonGfPresent:1;
-	USHORT	OperaionMode:2;
-#else
-	USHORT	OperaionMode:2;
-	USHORT	NonGfPresent:1;
-	USHORT	rsv3:1;
-	USHORT	OBSS_NonHTExist:1;
-	USHORT	rsv2:11;
-#endif
-
-	// New Extension Channel Offset IE
-	UCHAR	NewExtChannelOffset;
-	// Extension Capability IE = 127
-	UCHAR	BSSCoexist2040;
-} RT_HT_CAPABILITY, *PRT_HT_CAPABILITY;
-
-//   field in Addtional HT Information IE .
-typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-	UCHAR	SerInterGranu:3;
-	UCHAR	S_PSMPSup:1;
-	UCHAR	RifsMode:1;
-	UCHAR	RecomWidth:1;
-	UCHAR	ExtChanOffset:2;
-#else
-	UCHAR	ExtChanOffset:2;
-	UCHAR	RecomWidth:1;
-	UCHAR	RifsMode:1;
-	UCHAR	S_PSMPSup:1;	 //Indicate support for scheduled PSMP
-	UCHAR	SerInterGranu:3;	 //service interval granularity
-#endif
-} ADD_HTINFO, *PADD_HTINFO;
-
-typedef struct PACKED{
-#ifdef RT_BIG_ENDIAN
-	USHORT	rsv2:11;
-	USHORT	OBSS_NonHTExist:1;
-	USHORT	rsv:1;
-	USHORT	NonGfPresent:1;
-	USHORT	OperaionMode:2;
-#else
-	USHORT	OperaionMode:2;
-	USHORT	NonGfPresent:1;
-	USHORT	rsv:1;
-	USHORT	OBSS_NonHTExist:1;
-	USHORT	rsv2:11;
-#endif
-} ADD_HTINFO2, *PADD_HTINFO2;
-
-
-// TODO: Need sync with spec about the definition of StbcMcs. In Draft 3.03, it's reserved.
-typedef struct PACKED{
-#ifdef RT_BIG_ENDIAN
-	USHORT	rsv:4;
-	USHORT	PcoPhase:1;
-	USHORT	PcoActive:1;
-	USHORT	LsigTxopProt:1;
-	USHORT	STBCBeacon:1;
-	USHORT	DualCTSProtect:1;
-	USHORT	DualBeacon:1;
-	USHORT	StbcMcs:6;
-#else
-	USHORT	StbcMcs:6;
-	USHORT	DualBeacon:1;
-	USHORT	DualCTSProtect:1;
-	USHORT	STBCBeacon:1;
-	USHORT	LsigTxopProt:1;	// L-SIG TXOP protection full support
-	USHORT	PcoActive:1;
-	USHORT	PcoPhase:1;
-	USHORT	rsv:4;
-#endif // RT_BIG_ENDIAN //
-} ADD_HTINFO3, *PADD_HTINFO3;
-
-#define SIZE_ADD_HT_INFO_IE		22
-typedef struct  PACKED{
-	UCHAR				ControlChan;
-	ADD_HTINFO			AddHtInfo;
-	ADD_HTINFO2			AddHtInfo2;
-	ADD_HTINFO3			AddHtInfo3;
-	UCHAR				MCSSet[16];		// Basic MCS set
-} ADD_HT_INFO_IE, *PADD_HT_INFO_IE;
-
-typedef struct  PACKED{
-	UCHAR				NewExtChanOffset;
-} NEW_EXT_CHAN_IE, *PNEW_EXT_CHAN_IE;
-
-
-// 4-byte HTC field.  maybe included in any frame except non-QOS data frame.  The Order bit must set 1.
-typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-    UINT32		RDG:1;	//RDG / More PPDU
-    UINT32		ACConstraint:1;	//feedback request
-    UINT32		rsv:5;  //calibration sequence
-    UINT32		ZLFAnnouce:1;	// ZLF announcement
-    UINT32		CSISTEERING:2;	//CSI/ STEERING
-    UINT32		FBKReq:2;	//feedback request
-    UINT32		CalSeq:2;  //calibration sequence
-    UINT32		CalPos:2;	// calibration position
-    UINT32		MFBorASC:7;	//Link adaptation feedback containing recommended MCS. 0x7f for no feedback or not available
-    UINT32		MFS:3;	//SET to the received value of MRS. 0x111 for unsolicited MFB.
-    UINT32		MRSorASI:3;	// MRQ Sequence identifier. unchanged during entire procedure. 0x000-0x110.
-    UINT32		MRQ:1;	//MCS feedback. Request for a MCS feedback
-    UINT32		TRQ:1;	//sounding request
-    UINT32		MA:1;	//management action payload exist in (QoS Null+HTC)
-#else
-    UINT32		MA:1;	//management action payload exist in (QoS Null+HTC)
-    UINT32		TRQ:1;	//sounding request
-    UINT32		MRQ:1;	//MCS feedback. Request for a MCS feedback
-    UINT32		MRSorASI:3;	// MRQ Sequence identifier. unchanged during entire procedure. 0x000-0x110.
-    UINT32		MFS:3;	//SET to the received value of MRS. 0x111 for unsolicited MFB.
-    UINT32		MFBorASC:7;	//Link adaptation feedback containing recommended MCS. 0x7f for no feedback or not available
-    UINT32		CalPos:2;	// calibration position
-    UINT32		CalSeq:2;  //calibration sequence
-    UINT32		FBKReq:2;	//feedback request
-    UINT32		CSISTEERING:2;	//CSI/ STEERING
-    UINT32		ZLFAnnouce:1;	// ZLF announcement
-    UINT32		rsv:5;  //calibration sequence
-    UINT32		ACConstraint:1;	//feedback request
-    UINT32		RDG:1;	//RDG / More PPDU
-#endif /* !RT_BIG_ENDIAN */
-} HT_CONTROL, *PHT_CONTROL;
-
-// 2-byte QOS CONTROL field
-typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-    USHORT      Txop_QueueSize:8;
-    USHORT      AMsduPresent:1;
-    USHORT      AckPolicy:2;  //0: normal ACK 1:No ACK 2:scheduled under MTBA/PSMP  3: BA
-    USHORT      EOSP:1;
-    USHORT      TID:4;
-#else
-    USHORT      TID:4;
-    USHORT      EOSP:1;
-    USHORT      AckPolicy:2;  //0: normal ACK 1:No ACK 2:scheduled under MTBA/PSMP  3: BA
-    USHORT      AMsduPresent:1;
-    USHORT      Txop_QueueSize:8;
-#endif /* !RT_BIG_ENDIAN */
-} QOS_CONTROL, *PQOS_CONTROL;
-
-// 2-byte Frame control field
-typedef	struct	PACKED {
-#ifdef RT_BIG_ENDIAN
-	USHORT		Order:1;			// Strict order expected
-	USHORT		Wep:1;				// Wep data
-	USHORT		MoreData:1;			// More data bit
-	USHORT		PwrMgmt:1;			// Power management bit
-	USHORT		Retry:1;			// Retry status bit
-	USHORT		MoreFrag:1;			// More fragment bit
-	USHORT		FrDs:1;				// From DS indication
-	USHORT		ToDs:1;				// To DS indication
-	USHORT		SubType:4;			// MSDU subtype
-	USHORT		Type:2;				// MSDU type
-	USHORT		Ver:2;				// Protocol version
-#else
-	USHORT		Ver:2;				// Protocol version
-	USHORT		Type:2;				// MSDU type
-	USHORT		SubType:4;			// MSDU subtype
-	USHORT		ToDs:1;				// To DS indication
-	USHORT		FrDs:1;				// From DS indication
-	USHORT		MoreFrag:1;			// More fragment bit
-	USHORT		Retry:1;			// Retry status bit
-	USHORT		PwrMgmt:1;			// Power management bit
-	USHORT		MoreData:1;			// More data bit
-	USHORT		Wep:1;				// Wep data
-	USHORT		Order:1;			// Strict order expected
-#endif /* !RT_BIG_ENDIAN */
-} FRAME_CONTROL, *PFRAME_CONTROL;
-
-typedef	struct	PACKED _HEADER_802_11	{
-    FRAME_CONTROL   FC;
-    USHORT          Duration;
-    UCHAR           Addr1[MAC_ADDR_LEN];
-    UCHAR           Addr2[MAC_ADDR_LEN];
-	UCHAR			Addr3[MAC_ADDR_LEN];
-#ifdef RT_BIG_ENDIAN
-	USHORT			Sequence:12;
-	USHORT			Frag:4;
-#else
-	USHORT			Frag:4;
-	USHORT			Sequence:12;
-#endif /* !RT_BIG_ENDIAN */
-	UCHAR			Octet[0];
-}	HEADER_802_11, *PHEADER_802_11;
-
-typedef struct PACKED _FRAME_802_11 {
-    HEADER_802_11   Hdr;
-    UCHAR            Octet[1];
-}   FRAME_802_11, *PFRAME_802_11;
-
-// QoSNull embedding of management action. When HT Control MA field set to 1.
-typedef struct PACKED _MA_BODY {
-    UCHAR            Category;
-    UCHAR            Action;
-    UCHAR            Octet[1];
-}   MA_BODY, *PMA_BODY;
-
-typedef	struct	PACKED _HEADER_802_3	{
-    UCHAR           DAAddr1[MAC_ADDR_LEN];
-    UCHAR           SAAddr2[MAC_ADDR_LEN];
-    UCHAR           Octet[2];
-}	HEADER_802_3, *PHEADER_802_3;
-////Block ACK related format
-// 2-byte BA Parameter  field  in 	DELBA frames to terminate an already set up bA
-typedef struct PACKED{
-#ifdef RT_BIG_ENDIAN
-    USHORT      TID:4;	// value of TC os TS
-    USHORT      Initiator:1;	// 1: originator    0:recipient
-    USHORT      Rsv:11;	// always set to 0
-#else
-    USHORT      Rsv:11;	// always set to 0
-    USHORT      Initiator:1;	// 1: originator    0:recipient
-    USHORT      TID:4;	// value of TC os TS
-#endif /* !RT_BIG_ENDIAN */
-} DELBA_PARM, *PDELBA_PARM;
-
-// 2-byte BA Parameter Set field  in ADDBA frames to signal parm for setting up a BA
-typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-    USHORT      BufSize:10;	// number of buffe of size 2304 octetsr
-    USHORT      TID:4;	// value of TC os TS
-    USHORT      BAPolicy:1;	// 1: immediately BA    0:delayed BA
-    USHORT      AMSDUSupported:1;	// 0: not permitted		1: permitted
-#else
-    USHORT      AMSDUSupported:1;	// 0: not permitted		1: permitted
-    USHORT      BAPolicy:1;	// 1: immediately BA    0:delayed BA
-    USHORT      TID:4;	// value of TC os TS
-    USHORT      BufSize:10;	// number of buffe of size 2304 octetsr
-#endif /* !RT_BIG_ENDIAN */
-} BA_PARM, *PBA_PARM;
-
-// 2-byte BA Starting Seq CONTROL field
-typedef union PACKED {
-    struct PACKED {
-#ifdef RT_BIG_ENDIAN
-    USHORT      StartSeq:12;   // sequence number of the 1st MSDU for which this BAR is sent
-	USHORT      FragNum:4;	// always set to 0
-#else
-    USHORT      FragNum:4;	// always set to 0
-	USHORT      StartSeq:12;   // sequence number of the 1st MSDU for which this BAR is sent
-#endif /* RT_BIG_ENDIAN */
-    }   field;
-    USHORT           word;
-} BASEQ_CONTROL, *PBASEQ_CONTROL;
-
-//BAControl and BARControl are the same
-// 2-byte BA CONTROL field in BA frame
-typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-    USHORT      TID:4;
-    USHORT      Rsv:9;
-    USHORT      Compressed:1;
-    USHORT      MTID:1;		//EWC V1.24
-    USHORT      ACKPolicy:1; // only related to N-Delayed BA. But not support in RT2860b. 0:NormalACK  1:No ACK
-#else
-    USHORT      ACKPolicy:1; // only related to N-Delayed BA. But not support in RT2860b. 0:NormalACK  1:No ACK
-    USHORT      MTID:1;		//EWC V1.24
-    USHORT      Compressed:1;
-    USHORT      Rsv:9;
-    USHORT      TID:4;
-#endif /* !RT_BIG_ENDIAN */
-} BA_CONTROL, *PBA_CONTROL;
-
-// 2-byte BAR CONTROL field in BAR frame
-typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-    USHORT      TID:4;
-    USHORT      Rsv1:9;
-    USHORT      Compressed:1;
-    USHORT      MTID:1;		//if this bit1, use  FRAME_MTBA_REQ,  if 0, use FRAME_BA_REQ
-    USHORT      ACKPolicy:1;
-#else
-    USHORT      ACKPolicy:1; // 0:normal ack,  1:no ack.
-    USHORT      MTID:1;		//if this bit1, use  FRAME_MTBA_REQ,  if 0, use FRAME_BA_REQ
-    USHORT      Compressed:1;
-    USHORT      Rsv1:9;
-    USHORT      TID:4;
-#endif /* !RT_BIG_ENDIAN */
-} BAR_CONTROL, *PBAR_CONTROL;
-
-// BARControl in MTBAR frame
-typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-    USHORT      NumTID:4;
-    USHORT      Rsv1:9;
-    USHORT      Compressed:1;
-    USHORT      MTID:1;
-    USHORT      ACKPolicy:1;
-#else
-    USHORT      ACKPolicy:1;
-    USHORT      MTID:1;
-    USHORT      Compressed:1;
-    USHORT      Rsv1:9;
-    USHORT      NumTID:4;
-#endif /* !RT_BIG_ENDIAN */
-} MTBAR_CONTROL, *PMTBAR_CONTROL;
-
-typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-    USHORT      TID:4;
-    USHORT      Rsv1:12;
-#else
-    USHORT      Rsv1:12;
-    USHORT      TID:4;
-#endif /* !RT_BIG_ENDIAN */
-} PER_TID_INFO, *PPER_TID_INFO;
-
-typedef struct {
-	PER_TID_INFO      PerTID;
-	BASEQ_CONTROL 	 BAStartingSeq;
-} EACH_TID, *PEACH_TID;
-
-
-typedef struct PACKED _PSPOLL_FRAME {
-    FRAME_CONTROL   FC;
-    USHORT          Aid;
-    UCHAR           Bssid[MAC_ADDR_LEN];
-    UCHAR           Ta[MAC_ADDR_LEN];
-}   PSPOLL_FRAME, *PPSPOLL_FRAME;
-
-typedef	struct	PACKED _RTS_FRAME	{
-    FRAME_CONTROL   FC;
-    USHORT          Duration;
-    UCHAR           Addr1[MAC_ADDR_LEN];
-    UCHAR           Addr2[MAC_ADDR_LEN];
-}RTS_FRAME, *PRTS_FRAME;
-
-// BAREQ AND MTBAREQ have the same subtype BAR, 802.11n BAR use compressed bitmap.
-typedef struct PACKED _FRAME_BA_REQ {
-	FRAME_CONTROL   FC;
-	USHORT          Duration;
-	UCHAR           Addr1[MAC_ADDR_LEN];
-	UCHAR           Addr2[MAC_ADDR_LEN];
-	BAR_CONTROL  BARControl;
-	BASEQ_CONTROL 	 BAStartingSeq;
-}   FRAME_BA_REQ, *PFRAME_BA_REQ;
-
-typedef struct PACKED _FRAME_MTBA_REQ {
-	FRAME_CONTROL   FC;
-	USHORT          Duration;
-	UCHAR           Addr1[MAC_ADDR_LEN];
-	UCHAR           Addr2[MAC_ADDR_LEN];
-	MTBAR_CONTROL  MTBARControl;
-	PER_TID_INFO	PerTIDInfo;
-	BASEQ_CONTROL 	 BAStartingSeq;
-}   FRAME_MTBA_REQ, *PFRAME_MTBA_REQ;
-
-// Compressed format is mandantory in HT STA
-typedef struct PACKED _FRAME_MTBA {
-	FRAME_CONTROL   FC;
-	USHORT          Duration;
-	UCHAR           Addr1[MAC_ADDR_LEN];
-	UCHAR           Addr2[MAC_ADDR_LEN];
-	BA_CONTROL  BAControl;
-	BASEQ_CONTROL 	 BAStartingSeq;
-	UCHAR		BitMap[8];
-}   FRAME_MTBA, *PFRAME_MTBA;
-
-typedef struct PACKED _FRAME_PSMP_ACTION {
-	HEADER_802_11   Hdr;
-	UCHAR	Category;
-	UCHAR	Action;
-	UCHAR	Psmp;	// 7.3.1.25
-}   FRAME_PSMP_ACTION, *PFRAME_PSMP_ACTION;
-
-typedef struct PACKED _FRAME_ACTION_HDR {
-	HEADER_802_11   Hdr;
-	UCHAR	Category;
-	UCHAR	Action;
-}   FRAME_ACTION_HDR, *PFRAME_ACTION_HDR;
-
-//Action Frame
-//Action Frame  Category:Spectrum,  Action:Channel Switch. 7.3.2.20
-typedef struct PACKED _CHAN_SWITCH_ANNOUNCE {
-	UCHAR					ElementID;	// ID = IE_CHANNEL_SWITCH_ANNOUNCEMENT = 37
-	UCHAR					Len;
-	CHA_SWITCH_ANNOUNCE_IE	CSAnnounceIe;
-}   CHAN_SWITCH_ANNOUNCE, *PCHAN_SWITCH_ANNOUNCE;
-
-
-//802.11n : 7.3.2.20a
-typedef struct PACKED _SECOND_CHAN_OFFSET {
-	UCHAR				ElementID;		// ID = IE_SECONDARY_CH_OFFSET = 62
-	UCHAR				Len;
-	SEC_CHA_OFFSET_IE	SecChOffsetIe;
-}   SECOND_CHAN_OFFSET, *PSECOND_CHAN_OFFSET;
-
-
-typedef struct PACKED _FRAME_SPETRUM_CS {
-	HEADER_802_11   Hdr;
-	UCHAR	Category;
-	UCHAR	Action;
-	CHAN_SWITCH_ANNOUNCE	CSAnnounce;
-	SECOND_CHAN_OFFSET		SecondChannel;
-}   FRAME_SPETRUM_CS, *PFRAME_SPETRUM_CS;
-
-
-typedef struct PACKED _FRAME_ADDBA_REQ {
-	HEADER_802_11   Hdr;
-	UCHAR	Category;
-	UCHAR	Action;
-	UCHAR	Token;	// 1
-	BA_PARM		BaParm;	      //  2 - 10
-	USHORT		TimeOutValue;	// 0 - 0
-	BASEQ_CONTROL	BaStartSeq; // 0-0
-}   FRAME_ADDBA_REQ, *PFRAME_ADDBA_REQ;
-
-typedef struct PACKED _FRAME_ADDBA_RSP {
-	HEADER_802_11   Hdr;
-	UCHAR	Category;
-	UCHAR	Action;
-	UCHAR	Token;
-	USHORT	StatusCode;
-	BA_PARM		BaParm; //0 - 2
-	USHORT		TimeOutValue;
-}   FRAME_ADDBA_RSP, *PFRAME_ADDBA_RSP;
-
-typedef struct PACKED _FRAME_DELBA_REQ {
-	HEADER_802_11   Hdr;
-	UCHAR	Category;
-	UCHAR	Action;
-	DELBA_PARM		DelbaParm;
-	USHORT	ReasonCode;
-}   FRAME_DELBA_REQ, *PFRAME_DELBA_REQ;
-
-
-//7.2.1.7
-typedef struct PACKED _FRAME_BAR {
-	FRAME_CONTROL   FC;
-	USHORT          Duration;
-	UCHAR           Addr1[MAC_ADDR_LEN];
-	UCHAR           Addr2[MAC_ADDR_LEN];
-	BAR_CONTROL		BarControl;
-	BASEQ_CONTROL	StartingSeq;
-}   FRAME_BAR, *PFRAME_BAR;
-
-//7.2.1.7
-typedef struct PACKED _FRAME_BA {
-	FRAME_CONTROL   FC;
-	USHORT          Duration;
-	UCHAR           Addr1[MAC_ADDR_LEN];
-	UCHAR           Addr2[MAC_ADDR_LEN];
-	BAR_CONTROL		BarControl;
-	BASEQ_CONTROL	StartingSeq;
-	UCHAR		bitmask[8];
-}   FRAME_BA, *PFRAME_BA;
-
-
-// Radio Measuement Request Frame Format
-typedef struct PACKED _FRAME_RM_REQ_ACTION {
-	HEADER_802_11   Hdr;
-	UCHAR	Category;
-	UCHAR	Action;
-	UCHAR	Token;
-	USHORT	Repetition;
-	UCHAR   data[0];
-}   FRAME_RM_REQ_ACTION, *PFRAME_RM_REQ_ACTION;
-
-typedef struct PACKED {
-	UCHAR		ID;
-	UCHAR		Length;
-	UCHAR		ChannelSwitchMode;
-	UCHAR		NewRegClass;
-	UCHAR		NewChannelNum;
-	UCHAR		ChannelSwitchCount;
-} HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE, *PHT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE;
-
-
-//
-// _Limit must be the 2**n - 1
-// _SEQ1 , _SEQ2 must be within 0 ~ _Limit
-//
-#define SEQ_STEPONE(_SEQ1, _SEQ2, _Limit)	((_SEQ1 == ((_SEQ2+1) & _Limit)))
-#define SEQ_SMALLER(_SEQ1, _SEQ2, _Limit)	(((_SEQ1-_SEQ2) & ((_Limit+1)>>1)))
-#define SEQ_LARGER(_SEQ1, _SEQ2, _Limit)	((_SEQ1 != _SEQ2) && !(((_SEQ1-_SEQ2) & ((_Limit+1)>>1))))
-#define SEQ_WITHIN_WIN(_SEQ1, _SEQ2, _WIN, _Limit) (SEQ_LARGER(_SEQ1, _SEQ2, _Limit) &&  \
-												SEQ_SMALLER(_SEQ1, ((_SEQ2+_WIN+1)&_Limit), _Limit))
-
-//
-// Contention-free parameter (without ID and Length)
-//
-typedef struct PACKED {
-    BOOLEAN     bValid;         // 1: variable contains valid value
-    UCHAR       CfpCount;
-    UCHAR       CfpPeriod;
-    USHORT      CfpMaxDuration;
-    USHORT      CfpDurRemaining;
-} CF_PARM, *PCF_PARM;
-
-typedef	struct	_CIPHER_SUITE	{
-	NDIS_802_11_ENCRYPTION_STATUS	PairCipher;		// Unicast cipher 1, this one has more secured cipher suite
-	NDIS_802_11_ENCRYPTION_STATUS	PairCipherAux;	// Unicast cipher 2 if AP announce two unicast cipher suite
-	NDIS_802_11_ENCRYPTION_STATUS	GroupCipher;	// Group cipher
-	USHORT							RsnCapability;	// RSN capability from beacon
-	BOOLEAN							bMixMode;		// Indicate Pair & Group cipher might be different
-}	CIPHER_SUITE, *PCIPHER_SUITE;
-
-// EDCA configuration from AP's BEACON/ProbeRsp
-typedef struct {
-    BOOLEAN     bValid;         // 1: variable contains valid value
-    BOOLEAN     bAdd;         // 1: variable contains valid value
-    BOOLEAN     bQAck;
-    BOOLEAN     bQueueRequest;
-    BOOLEAN     bTxopRequest;
-    BOOLEAN     bAPSDCapable;
-//  BOOLEAN     bMoreDataAck;
-    UCHAR       EdcaUpdateCount;
-    UCHAR       Aifsn[4];       // 0:AC_BK, 1:AC_BE, 2:AC_VI, 3:AC_VO
-    UCHAR       Cwmin[4];
-    UCHAR       Cwmax[4];
-    USHORT      Txop[4];      // in unit of 32-us
-    BOOLEAN     bACM[4];      // 1: Admission Control of AC_BK is mandattory
-} EDCA_PARM, *PEDCA_PARM;
-
-// QBSS LOAD information from QAP's BEACON/ProbeRsp
-typedef struct {
-    BOOLEAN     bValid;                     // 1: variable contains valid value
-    USHORT      StaNum;
-    UCHAR       ChannelUtilization;
-    USHORT      RemainingAdmissionControl;  // in unit of 32-us
-} QBSS_LOAD_PARM, *PQBSS_LOAD_PARM;
-
-// QBSS Info field in QSTA's assoc req
-typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-	UCHAR		Rsv2:1;
-	UCHAR		MaxSPLength:2;
-	UCHAR		Rsv1:1;
-	UCHAR		UAPSD_AC_BE:1;
-	UCHAR		UAPSD_AC_BK:1;
-	UCHAR		UAPSD_AC_VI:1;
-	UCHAR		UAPSD_AC_VO:1;
-#else
-    UCHAR		UAPSD_AC_VO:1;
-	UCHAR		UAPSD_AC_VI:1;
-	UCHAR		UAPSD_AC_BK:1;
-	UCHAR		UAPSD_AC_BE:1;
-	UCHAR		Rsv1:1;
-	UCHAR		MaxSPLength:2;
-	UCHAR		Rsv2:1;
-#endif /* !RT_BIG_ENDIAN */
-} QBSS_STA_INFO_PARM, *PQBSS_STA_INFO_PARM;
-
-// QBSS Info field in QAP's Beacon/ProbeRsp
-typedef struct PACKED {
-#ifdef RT_BIG_ENDIAN
-	UCHAR		UAPSD:1;
-	UCHAR		Rsv:3;
-    UCHAR		ParamSetCount:4;
-#else
-    UCHAR		ParamSetCount:4;
-	UCHAR		Rsv:3;
-	UCHAR		UAPSD:1;
-#endif /* !RT_BIG_ENDIAN */
-} QBSS_AP_INFO_PARM, *PQBSS_AP_INFO_PARM;
-
-// QOS Capability reported in QAP's BEACON/ProbeRsp
-// QOS Capability sent out in QSTA's AssociateReq/ReAssociateReq
-typedef struct {
-    BOOLEAN     bValid;                     // 1: variable contains valid value
-    BOOLEAN     bQAck;
-    BOOLEAN     bQueueRequest;
-    BOOLEAN     bTxopRequest;
-//  BOOLEAN     bMoreDataAck;
-    UCHAR       EdcaUpdateCount;
-} QOS_CAPABILITY_PARM, *PQOS_CAPABILITY_PARM;
-
-#ifdef CONFIG_STA_SUPPORT
-typedef struct {
-    UCHAR       IELen;
-    UCHAR       IE[MAX_CUSTOM_LEN];
-} WPA_IE_;
-#endif // CONFIG_STA_SUPPORT //
-
-
-typedef struct {
-    UCHAR   Bssid[MAC_ADDR_LEN];
-    UCHAR   Channel;
-	UCHAR   CentralChannel;	//Store the wide-band central channel for 40MHz.  .used in 40MHz AP. Or this is the same as Channel.
-    UCHAR   BssType;
-    USHORT  AtimWin;
-    USHORT  BeaconPeriod;
-
-    UCHAR   SupRate[MAX_LEN_OF_SUPPORTED_RATES];
-    UCHAR   SupRateLen;
-    UCHAR   ExtRate[MAX_LEN_OF_SUPPORTED_RATES];
-    UCHAR   ExtRateLen;
-	HT_CAPABILITY_IE HtCapability;
-	UCHAR			HtCapabilityLen;
-	ADD_HT_INFO_IE AddHtInfo;	// AP might use this additional ht info IE
-	UCHAR			AddHtInfoLen;
-	UCHAR			NewExtChanOffset;
-	CHAR    Rssi;
-    UCHAR   Privacy;			// Indicate security function ON/OFF. Don't mess up with auth mode.
-	UCHAR	Hidden;
-
-    USHORT  DtimPeriod;
-    USHORT  CapabilityInfo;
-
-    USHORT  CfpCount;
-    USHORT  CfpPeriod;
-    USHORT  CfpMaxDuration;
-    USHORT  CfpDurRemaining;
-    UCHAR   SsidLen;
-    CHAR    Ssid[MAX_LEN_OF_SSID];
-
-    ULONG   LastBeaconRxTime; // OS's timestamp
-
-	BOOLEAN	bSES;
-
-	// New for WPA2
-	CIPHER_SUITE					WPA;			// AP announced WPA cipher suite
-	CIPHER_SUITE					WPA2;			// AP announced WPA2 cipher suite
-
-	// New for microsoft WPA support
-	NDIS_802_11_FIXED_IEs	FixIEs;
-	NDIS_802_11_AUTHENTICATION_MODE	AuthModeAux;	// Addition mode for WPA2 / WPA capable AP
-	NDIS_802_11_AUTHENTICATION_MODE	AuthMode;
-	NDIS_802_11_WEP_STATUS	WepStatus;				// Unicast Encryption Algorithm extract from VAR_IE
-	USHORT					VarIELen;				// Length of next VIE include EID & Length
-	UCHAR					VarIEs[MAX_VIE_LEN];
-
-	// CCX Ckip information
-    UCHAR   CkipFlag;
-
-	// CCX 2 TSF
-	UCHAR	PTSF[4];		// Parent TSF
-	UCHAR	TTSF[8];		// Target TSF
-
-    // 802.11e d9, and WMM
-	EDCA_PARM           EdcaParm;
-	QOS_CAPABILITY_PARM QosCapability;
-	QBSS_LOAD_PARM      QbssLoad;
-#ifdef CONFIG_STA_SUPPORT
-    WPA_IE_     WpaIE;
-    WPA_IE_     RsnIE;
-#ifdef EXT_BUILD_CHANNEL_LIST
-	UCHAR		CountryString[3];
-	BOOLEAN		bHasCountryIE;
-#endif // EXT_BUILD_CHANNEL_LIST //
-#endif // CONFIG_STA_SUPPORT //
-} BSS_ENTRY, *PBSS_ENTRY;
-
-typedef struct {
-    UCHAR           BssNr;
-    UCHAR           BssOverlapNr;
-    BSS_ENTRY       BssEntry[MAX_LEN_OF_BSS_TABLE];
-} BSS_TABLE, *PBSS_TABLE;
-
-
-typedef struct _MLME_QUEUE_ELEM {
-    ULONG             Machine;
-    ULONG             MsgType;
-    ULONG             MsgLen;
-    UCHAR             Msg[MGMT_DMA_BUFFER_SIZE];
-    LARGE_INTEGER     TimeStamp;
-    UCHAR             Rssi0;
-    UCHAR             Rssi1;
-    UCHAR             Rssi2;
-    UCHAR             Signal;
-    UCHAR             Channel;
-    UCHAR             Wcid;
-    BOOLEAN           Occupied;
-#ifdef MLME_EX
-	USHORT            Idx;
-#endif // MLME_EX //
-} MLME_QUEUE_ELEM, *PMLME_QUEUE_ELEM;
-
-typedef struct _MLME_QUEUE {
-    ULONG             Num;
-    ULONG             Head;
-    ULONG             Tail;
-    NDIS_SPIN_LOCK   Lock;
-    MLME_QUEUE_ELEM  Entry[MAX_LEN_OF_MLME_QUEUE];
-} MLME_QUEUE, *PMLME_QUEUE;
-
-typedef VOID (*STATE_MACHINE_FUNC)(VOID *Adaptor, MLME_QUEUE_ELEM *Elem);
-
-typedef struct _STATE_MACHINE {
-    ULONG                           Base;
-    ULONG                           NrState;
-    ULONG                           NrMsg;
-    ULONG                           CurrState;
-    STATE_MACHINE_FUNC             *TransFunc;
-} STATE_MACHINE, *PSTATE_MACHINE;
-
-
-// MLME AUX data structure that hold temporarliy settings during a connection attempt.
-// Once this attemp succeeds, all settings will be copy to pAd->StaActive.
-// A connection attempt (user set OID, roaming, CCX fast roaming,..) consists of
-// several steps (JOIN, AUTH, ASSOC or REASSOC) and may fail at any step. We purposely
-// separate this under-trial settings away from pAd->StaActive so that once
-// this new attempt failed, driver can auto-recover back to the active settings.
-typedef struct _MLME_AUX {
-    UCHAR               BssType;
-    UCHAR               Ssid[MAX_LEN_OF_SSID];
-    UCHAR               SsidLen;
-    UCHAR               Bssid[MAC_ADDR_LEN];
-	UCHAR				AutoReconnectSsid[MAX_LEN_OF_SSID];
-	UCHAR				AutoReconnectSsidLen;
-    USHORT              Alg;
-    UCHAR               ScanType;
-    UCHAR               Channel;
-	UCHAR               CentralChannel;
-    USHORT              Aid;
-    USHORT              CapabilityInfo;
-    USHORT              BeaconPeriod;
-    USHORT              CfpMaxDuration;
-    USHORT              CfpPeriod;
-    USHORT              AtimWin;
-
-	// Copy supported rate from desired AP's beacon. We are trying to match
-	// AP's supported and extended rate settings.
-	UCHAR		        SupRate[MAX_LEN_OF_SUPPORTED_RATES];
-	UCHAR		        ExtRate[MAX_LEN_OF_SUPPORTED_RATES];
-	UCHAR		        SupRateLen;
-	UCHAR		        ExtRateLen;
-	HT_CAPABILITY_IE		HtCapability;
-	UCHAR		        	HtCapabilityLen;
-	ADD_HT_INFO_IE		AddHtInfo;	// AP might use this additional ht info IE
-	UCHAR			NewExtChannelOffset;
-	//RT_HT_CAPABILITY	SupportedHtPhy;
-
-    // new for QOS
-    QOS_CAPABILITY_PARM APQosCapability;    // QOS capability of the current associated AP
-    EDCA_PARM           APEdcaParm;         // EDCA parameters of the current associated AP
-    QBSS_LOAD_PARM      APQbssLoad;         // QBSS load of the current associated AP
-
-    // new to keep Ralink specific feature
-    ULONG               APRalinkIe;
-
-    BSS_TABLE           SsidBssTab;     // AP list for the same SSID
-    BSS_TABLE           RoamTab;        // AP list eligible for roaming
-    ULONG               BssIdx;
-    ULONG               RoamIdx;
-
-	BOOLEAN				CurrReqIsFromNdis;
-
-    RALINK_TIMER_STRUCT BeaconTimer, ScanTimer;
-    RALINK_TIMER_STRUCT AuthTimer;
-    RALINK_TIMER_STRUCT AssocTimer, ReassocTimer, DisassocTimer;
-} MLME_AUX, *PMLME_AUX;
-
-typedef struct _MLME_ADDBA_REQ_STRUCT{
-	UCHAR   Wcid;	//
-	UCHAR   pAddr[MAC_ADDR_LEN];
-	UCHAR   BaBufSize;
-	USHORT	TimeOutValue;
-	UCHAR   TID;
-	UCHAR   Token;
-	USHORT	BaStartSeq;
-} MLME_ADDBA_REQ_STRUCT, *PMLME_ADDBA_REQ_STRUCT;
-
-
-typedef struct _MLME_DELBA_REQ_STRUCT{
-	UCHAR   Wcid;	//
-	UCHAR     Addr[MAC_ADDR_LEN];
-	UCHAR   TID;
-	UCHAR	Initiator;
-} MLME_DELBA_REQ_STRUCT, *PMLME_DELBA_REQ_STRUCT;
-
-// assoc struct is equal to reassoc
-typedef struct _MLME_ASSOC_REQ_STRUCT{
-    UCHAR     Addr[MAC_ADDR_LEN];
-    USHORT    CapabilityInfo;
-    USHORT    ListenIntv;
-    ULONG     Timeout;
-} MLME_ASSOC_REQ_STRUCT, *PMLME_ASSOC_REQ_STRUCT, MLME_REASSOC_REQ_STRUCT, *PMLME_REASSOC_REQ_STRUCT;
-
-typedef struct _MLME_DISASSOC_REQ_STRUCT{
-    UCHAR     Addr[MAC_ADDR_LEN];
-    USHORT    Reason;
-} MLME_DISASSOC_REQ_STRUCT, *PMLME_DISASSOC_REQ_STRUCT;
-
-typedef struct _MLME_AUTH_REQ_STRUCT {
-    UCHAR        Addr[MAC_ADDR_LEN];
-    USHORT       Alg;
-    ULONG        Timeout;
-} MLME_AUTH_REQ_STRUCT, *PMLME_AUTH_REQ_STRUCT;
-
-typedef struct _MLME_DEAUTH_REQ_STRUCT {
-    UCHAR        Addr[MAC_ADDR_LEN];
-    USHORT       Reason;
-} MLME_DEAUTH_REQ_STRUCT, *PMLME_DEAUTH_REQ_STRUCT;
-
-typedef struct {
-    ULONG      BssIdx;
-} MLME_JOIN_REQ_STRUCT;
-
-typedef struct _MLME_SCAN_REQ_STRUCT {
-    UCHAR      Bssid[MAC_ADDR_LEN];
-    UCHAR      BssType;
-    UCHAR      ScanType;
-    UCHAR      SsidLen;
-    CHAR       Ssid[MAX_LEN_OF_SSID];
-} MLME_SCAN_REQ_STRUCT, *PMLME_SCAN_REQ_STRUCT;
-
-typedef struct _MLME_START_REQ_STRUCT {
-    CHAR        Ssid[MAX_LEN_OF_SSID];
-    UCHAR       SsidLen;
-} MLME_START_REQ_STRUCT, *PMLME_START_REQ_STRUCT;
-
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-// structure for DLS
-typedef struct _RT_802_11_DLS {
-	USHORT						TimeOut;		// Use to time out while slience, unit: second , set by UI
-	USHORT						CountDownTimer;	// Use to time out while slience,unit: second , used by driver only
-	NDIS_802_11_MAC_ADDRESS		MacAddr;		// set by UI
-	UCHAR						Status;			// 0: none , 1: wait STAkey, 2: finish DLS setup , set by driver only
-	BOOLEAN						Valid;			// 1: valid , 0: invalid , set by UI, use to setup or tear down DLS link
-	RALINK_TIMER_STRUCT			Timer;			// Use to time out while handshake
-	USHORT						Sequence;
-	USHORT						MacTabMatchWCID;	// ASIC
-	BOOLEAN						bHTCap;
-	PVOID						pAd;
-} RT_802_11_DLS, *PRT_802_11_DLS;
-
-typedef struct _MLME_DLS_REQ_STRUCT {
-    PRT_802_11_DLS	pDLS;
-    USHORT			Reason;
-} MLME_DLS_REQ_STRUCT, *PMLME_DLS_REQ_STRUCT;
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
-typedef struct PACKED {
-    UCHAR   Eid;
-    UCHAR   Len;
-    CHAR   Octet[1];
-} EID_STRUCT,*PEID_STRUCT, BEACON_EID_STRUCT, *PBEACON_EID_STRUCT;
-
-typedef struct PACKED _RTMP_TX_RATE_SWITCH
-{
-	UCHAR   ItemNo;
-#ifdef RT_BIG_ENDIAN
-	UCHAR	Rsv2:2;
-	UCHAR	Mode:2;
-	UCHAR	Rsv1:1;
-	UCHAR	BW:1;
-	UCHAR	ShortGI:1;
-	UCHAR	STBC:1;
-#else
-	UCHAR	STBC:1;
-	UCHAR	ShortGI:1;
-	UCHAR	BW:1;
-	UCHAR	Rsv1:1;
-	UCHAR	Mode:2;
-	UCHAR	Rsv2:2;
-#endif
-	UCHAR   CurrMCS;
-	UCHAR   TrainUp;
-	UCHAR   TrainDown;
-} RRTMP_TX_RATE_SWITCH, *PRTMP_TX_RATE_SWITCH;
-
-// ========================== AP mlme.h ===============================
-#define TBTT_PRELOAD_TIME       384        // usec. LomgPreamble + 24-byte at 1Mbps
-#define DEFAULT_DTIM_PERIOD     1
-
-// weighting factor to calculate Channel quality, total should be 100%
-//#define RSSI_WEIGHTING                   0
-//#define TX_WEIGHTING                     40
-//#define RX_WEIGHTING                     60
-
-#define MAC_TABLE_AGEOUT_TIME			300			// unit: sec
-#define MAC_TABLE_ASSOC_TIMEOUT			5			// unit: sec
-#define MAC_TABLE_FULL(Tab)				((Tab).size == MAX_LEN_OF_MAC_TABLE)
-
-// AP shall drop the sta if contine Tx fail count reach it.
-#define MAC_ENTRY_LIFE_CHECK_CNT		20			// packet cnt.
-
-// Value domain of pMacEntry->Sst
-typedef enum _Sst {
-    SST_NOT_AUTH,   // 0: equivalent to IEEE 802.11/1999 state 1
-    SST_AUTH,       // 1: equivalent to IEEE 802.11/1999 state 2
-    SST_ASSOC       // 2: equivalent to IEEE 802.11/1999 state 3
-} SST;
-
-// value domain of pMacEntry->AuthState
-typedef enum _AuthState {
-    AS_NOT_AUTH,
-    AS_AUTH_OPEN,       // STA has been authenticated using OPEN SYSTEM
-    AS_AUTH_KEY,        // STA has been authenticated using SHARED KEY
-    AS_AUTHENTICATING   // STA is waiting for AUTH seq#3 using SHARED KEY
-} AUTH_STATE;
-
-//for-wpa value domain of pMacEntry->WpaState  802.1i D3   p.114
-typedef enum _ApWpaState {
-    AS_NOTUSE,              // 0
-    AS_DISCONNECT,          // 1
-    AS_DISCONNECTED,        // 2
-    AS_INITIALIZE,          // 3
-    AS_AUTHENTICATION,      // 4
-    AS_AUTHENTICATION2,     // 5
-    AS_INITPMK,             // 6
-    AS_INITPSK,             // 7
-    AS_PTKSTART,            // 8
-    AS_PTKINIT_NEGOTIATING, // 9
-    AS_PTKINITDONE,         // 10
-    AS_UPDATEKEYS,          // 11
-    AS_INTEGRITY_FAILURE,   // 12
-    AS_KEYUPDATE,           // 13
-} AP_WPA_STATE;
-
-// for-wpa value domain of pMacEntry->WpaState  802.1i D3   p.114
-typedef enum _GTKState {
-    REKEY_NEGOTIATING,
-    REKEY_ESTABLISHED,
-    KEYERROR,
-} GTK_STATE;
-
-//  for-wpa  value domain of pMacEntry->WpaState  802.1i D3   p.114
-typedef enum _WpaGTKState {
-    SETKEYS,
-    SETKEYS_DONE,
-} WPA_GTK_STATE;
-// ====================== end of AP mlme.h ============================
-
-
-#endif	// MLME_H__
+#include "../rt2870/mlme.h"
diff --git a/drivers/staging/rt3070/netif_block.h b/drivers/staging/rt3070/netif_block.h
deleted file mode 100644
index 6e5151c4109..00000000000
--- a/drivers/staging/rt3070/netif_block.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-#ifndef __NET_IF_BLOCK_H__
-#define __NET_IF_BLOCK_H__
-
-//#include <linux/device.h>
-#include "link_list.h"
-#include "rtmp.h"
-
-#define FREE_NETIF_POOL_SIZE 32
-
-typedef struct _NETIF_ENTRY
-{
-	struct _NETIF_ENTRY *pNext;
-	PNET_DEV pNetDev;
-} NETIF_ENTRY, *PNETIF_ENTRY;
-
-void initblockQueueTab(
-	IN PRTMP_ADAPTER pAd);
-
-BOOLEAN blockNetIf(
-	IN PBLOCK_QUEUE_ENTRY pBlockQueueEntry,
-	IN PNET_DEV pNetDev);
-
-VOID releaseNetIf(
-	IN PBLOCK_QUEUE_ENTRY pBlockQueueEntry);
-
-VOID StopNetIfQueue(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR QueIdx,
-	IN PNDIS_PACKET pPacket);
-#endif // __NET_IF_BLOCK_H__
-
diff --git a/drivers/staging/rt3070/oid.h b/drivers/staging/rt3070/oid.h
index f78bf0a5f14..cbf16a8ae61 100644
--- a/drivers/staging/rt3070/oid.h
+++ b/drivers/staging/rt3070/oid.h
@@ -1,1142 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	oid.h
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Name		Date			Modification logs
-*/
-#ifndef _OID_H_
-#define _OID_H_
-
-//#include <linux/wireless.h>
-
-
-#define TRUE				1
-#define FALSE				0
-//
-// IEEE 802.11 Structures and definitions
-//
-#define MAX_TX_POWER_LEVEL              100   /* mW */
-#define MAX_RSSI_TRIGGER                -10    /* dBm */
-#define MIN_RSSI_TRIGGER                -200   /* dBm */
-#define MAX_FRAG_THRESHOLD              2346  /* byte count */
-#define MIN_FRAG_THRESHOLD              256   /* byte count */
-#define MAX_RTS_THRESHOLD               2347  /* byte count */
-
-// new types for Media Specific Indications
-// Extension channel offset
-#define EXTCHA_NONE			0
-#define EXTCHA_ABOVE		0x1
-#define EXTCHA_BELOW		0x3
-
-// BW
-#define BAND_WIDTH_20		0
-#define BAND_WIDTH_40		1
-#define BAND_WIDTH_BOTH		2
-#define BAND_WIDTH_10		3	// 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field.
-// SHORTGI
-#define GAP_INTERVAL_400	1	// only support in HT mode
-#define GAP_INTERVAL_800	0
-#define GAP_INTERVAL_BOTH	2
-
-#define NdisMediaStateConnected			1
-#define NdisMediaStateDisconnected		0
-
-#define NDIS_802_11_LENGTH_SSID         32
-#define NDIS_802_11_LENGTH_RATES        8
-#define NDIS_802_11_LENGTH_RATES_EX     16
-#define MAC_ADDR_LENGTH                 6
-#define MAX_NUM_OF_CHS					49 // 14 channels @2.4G +  12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL terminationc
-#define MAX_NUMBER_OF_EVENT				10  // entry # in EVENT table
-#define MAX_NUMBER_OF_MAC				32 // if MAX_MBSSID_NUM is 8, this value can't be larger than 211
-#define MAX_NUMBER_OF_ACL				64
-#define MAX_LENGTH_OF_SUPPORT_RATES		12    // 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
-#define MAX_NUMBER_OF_DLS_ENTRY			4
-
-
-
-#ifndef UNDER_CE
-// OID definition, since NDIS 5.0 didn't define these, we need to define for our own
-//#if _WIN32_WINNT<=0x0500
-
-#define OID_GEN_MACHINE_NAME               0x0001021A
-
-#ifdef RALINK_ATE
-#define RT_QUERY_ATE_TXDONE_COUNT			0x0401
-#endif // RALINK_ATE //
-#define RT_QUERY_SIGNAL_CONTEXT				0x0402
-#define RT_SET_IAPP_PID                 	0x0404
-#define RT_SET_APD_PID						0x0405
-#define RT_SET_DEL_MAC_ENTRY				0x0406
-
-//
-// IEEE 802.11 OIDs
-//
-#define	OID_GET_SET_TOGGLE			0x8000
-
-#define	OID_802_11_NETWORK_TYPES_SUPPORTED			0x0103
-#define	OID_802_11_NETWORK_TYPE_IN_USE				0x0104
-#define	OID_802_11_RSSI_TRIGGER						0x0107
-#define	RT_OID_802_11_RSSI							0x0108 //rt2860	only , kathy
-#define	RT_OID_802_11_RSSI_1						0x0109 //rt2860	only , kathy
-#define	RT_OID_802_11_RSSI_2						0x010A //rt2860	only , kathy
-#define	OID_802_11_NUMBER_OF_ANTENNAS				0x010B
-#define	OID_802_11_RX_ANTENNA_SELECTED				0x010C
-#define	OID_802_11_TX_ANTENNA_SELECTED				0x010D
-#define	OID_802_11_SUPPORTED_RATES					0x010E
-#define	OID_802_11_ADD_WEP							0x0112
-#define	OID_802_11_REMOVE_WEP						0x0113
-#define	OID_802_11_DISASSOCIATE						0x0114
-#define	OID_802_11_PRIVACY_FILTER					0x0118
-#define	OID_802_11_ASSOCIATION_INFORMATION			0x011E
-#define	OID_802_11_TEST								0x011F
-#define	RT_OID_802_11_COUNTRY_REGION				0x0507
-#define	OID_802_11_BSSID_LIST_SCAN					0x0508
-#define	OID_802_11_SSID								0x0509
-#define	OID_802_11_BSSID							0x050A
-#define	RT_OID_802_11_RADIO							0x050B
-#define	RT_OID_802_11_PHY_MODE						0x050C
-#define	RT_OID_802_11_STA_CONFIG					0x050D
-#define	OID_802_11_DESIRED_RATES					0x050E
-#define	RT_OID_802_11_PREAMBLE						0x050F
-#define	OID_802_11_WEP_STATUS						0x0510
-#define	OID_802_11_AUTHENTICATION_MODE				0x0511
-#define	OID_802_11_INFRASTRUCTURE_MODE				0x0512
-#define	RT_OID_802_11_RESET_COUNTERS				0x0513
-#define	OID_802_11_RTS_THRESHOLD					0x0514
-#define	OID_802_11_FRAGMENTATION_THRESHOLD			0x0515
-#define	OID_802_11_POWER_MODE						0x0516
-#define	OID_802_11_TX_POWER_LEVEL					0x0517
-#define	RT_OID_802_11_ADD_WPA						0x0518
-#define	OID_802_11_REMOVE_KEY						0x0519
-#define	OID_802_11_ADD_KEY							0x0520
-#define	OID_802_11_CONFIGURATION					0x0521
-#define	OID_802_11_TX_PACKET_BURST					0x0522
-#define	RT_OID_802_11_QUERY_NOISE_LEVEL				0x0523
-#define	RT_OID_802_11_EXTRA_INFO					0x0524
-#ifdef	DBG
-#define	RT_OID_802_11_HARDWARE_REGISTER				0x0525
-#endif
-#define OID_802_11_ENCRYPTION_STATUS            OID_802_11_WEP_STATUS
-#define OID_802_11_DEAUTHENTICATION                 0x0526
-#define OID_802_11_DROP_UNENCRYPTED                 0x0527
-#define OID_802_11_MIC_FAILURE_REPORT_FRAME         0x0528
-
-// For 802.1x daemin using to require current driver configuration
-#define OID_802_11_RADIUS_QUERY_SETTING				0x0540
-
-#define	RT_OID_DEVICE_NAME							0x0607
-#define	RT_OID_VERSION_INFO							0x0608
-#define	OID_802_11_BSSID_LIST						0x0609
-#define	OID_802_3_CURRENT_ADDRESS					0x060A
-#define	OID_GEN_MEDIA_CONNECT_STATUS				0x060B
-#define	RT_OID_802_11_QUERY_LINK_STATUS				0x060C
-#define	OID_802_11_RSSI								0x060D
-#define	OID_802_11_STATISTICS						0x060E
-#define	OID_GEN_RCV_OK								0x060F
-#define	OID_GEN_RCV_NO_BUFFER						0x0610
-#define	RT_OID_802_11_QUERY_EEPROM_VERSION			0x0611
-#define	RT_OID_802_11_QUERY_FIRMWARE_VERSION		0x0612
-#define	RT_OID_802_11_QUERY_LAST_RX_RATE			0x0613
-#define	RT_OID_802_11_TX_POWER_LEVEL_1				0x0614
-#define	RT_OID_802_11_QUERY_PIDVID					0x0615
-//for WPA_SUPPLICANT_SUPPORT
-#define OID_SET_COUNTERMEASURES                     0x0616
-#define OID_802_11_SET_IEEE8021X                    0x0617
-#define OID_802_11_SET_IEEE8021X_REQUIRE_KEY        0x0618
-#define OID_802_11_PMKID                            0x0620
-#define RT_OID_WPA_SUPPLICANT_SUPPORT               0x0621
-#define RT_OID_WE_VERSION_COMPILED                  0x0622
-#define RT_OID_NEW_DRIVER                           0x0623
-
-
-//rt2860 , kathy
-#define	RT_OID_802_11_SNR_0							0x0630
-#define	RT_OID_802_11_SNR_1							0x0631
-#define	RT_OID_802_11_QUERY_LAST_TX_RATE			0x0632
-#define	RT_OID_802_11_QUERY_HT_PHYMODE				0x0633
-#define	RT_OID_802_11_SET_HT_PHYMODE				0x0634
-#define	OID_802_11_RELOAD_DEFAULTS					0x0635
-#define	RT_OID_802_11_QUERY_APSD_SETTING			0x0636
-#define	RT_OID_802_11_SET_APSD_SETTING				0x0637
-#define	RT_OID_802_11_QUERY_APSD_PSM				0x0638
-#define	RT_OID_802_11_SET_APSD_PSM					0x0639
-#define	RT_OID_802_11_QUERY_DLS						0x063A
-#define	RT_OID_802_11_SET_DLS						0x063B
-#define	RT_OID_802_11_QUERY_DLS_PARAM				0x063C
-#define	RT_OID_802_11_SET_DLS_PARAM					0x063D
-#define RT_OID_802_11_QUERY_WMM              		0x063E
-#define RT_OID_802_11_SET_WMM      					0x063F
-#define RT_OID_802_11_QUERY_IMME_BA_CAP				0x0640
-#define RT_OID_802_11_SET_IMME_BA_CAP				0x0641
-#define RT_OID_802_11_QUERY_BATABLE					0x0642
-#define RT_OID_802_11_ADD_IMME_BA					0x0643
-#define RT_OID_802_11_TEAR_IMME_BA					0x0644
-#define RT_OID_DRIVER_DEVICE_NAME                   0x0645
-#define RT_OID_802_11_QUERY_DAT_HT_PHYMODE          0x0646
-#define RT_OID_QUERY_MULTIPLE_CARD_SUPPORT          0x0647
-
-// Ralink defined OIDs
-// Dennis Lee move to platform specific
-
-#define	RT_OID_802_11_BSSID					  (OID_GET_SET_TOGGLE |	OID_802_11_BSSID)
-#define	RT_OID_802_11_SSID					  (OID_GET_SET_TOGGLE |	OID_802_11_SSID)
-#define	RT_OID_802_11_INFRASTRUCTURE_MODE	  (OID_GET_SET_TOGGLE |	OID_802_11_INFRASTRUCTURE_MODE)
-#define	RT_OID_802_11_ADD_WEP				  (OID_GET_SET_TOGGLE |	OID_802_11_ADD_WEP)
-#define	RT_OID_802_11_ADD_KEY				  (OID_GET_SET_TOGGLE |	OID_802_11_ADD_KEY)
-#define	RT_OID_802_11_REMOVE_WEP			  (OID_GET_SET_TOGGLE |	OID_802_11_REMOVE_WEP)
-#define	RT_OID_802_11_REMOVE_KEY			  (OID_GET_SET_TOGGLE |	OID_802_11_REMOVE_KEY)
-#define	RT_OID_802_11_DISASSOCIATE			  (OID_GET_SET_TOGGLE |	OID_802_11_DISASSOCIATE)
-#define	RT_OID_802_11_AUTHENTICATION_MODE	  (OID_GET_SET_TOGGLE |	OID_802_11_AUTHENTICATION_MODE)
-#define	RT_OID_802_11_PRIVACY_FILTER		  (OID_GET_SET_TOGGLE |	OID_802_11_PRIVACY_FILTER)
-#define	RT_OID_802_11_BSSID_LIST_SCAN		  (OID_GET_SET_TOGGLE |	OID_802_11_BSSID_LIST_SCAN)
-#define	RT_OID_802_11_WEP_STATUS			  (OID_GET_SET_TOGGLE |	OID_802_11_WEP_STATUS)
-#define	RT_OID_802_11_RELOAD_DEFAULTS		  (OID_GET_SET_TOGGLE |	OID_802_11_RELOAD_DEFAULTS)
-#define	RT_OID_802_11_NETWORK_TYPE_IN_USE	  (OID_GET_SET_TOGGLE |	OID_802_11_NETWORK_TYPE_IN_USE)
-#define	RT_OID_802_11_TX_POWER_LEVEL		  (OID_GET_SET_TOGGLE |	OID_802_11_TX_POWER_LEVEL)
-#define	RT_OID_802_11_RSSI_TRIGGER			  (OID_GET_SET_TOGGLE |	OID_802_11_RSSI_TRIGGER)
-#define	RT_OID_802_11_FRAGMENTATION_THRESHOLD (OID_GET_SET_TOGGLE |	OID_802_11_FRAGMENTATION_THRESHOLD)
-#define	RT_OID_802_11_RTS_THRESHOLD			  (OID_GET_SET_TOGGLE |	OID_802_11_RTS_THRESHOLD)
-#define	RT_OID_802_11_RX_ANTENNA_SELECTED	  (OID_GET_SET_TOGGLE |	OID_802_11_RX_ANTENNA_SELECTED)
-#define	RT_OID_802_11_TX_ANTENNA_SELECTED	  (OID_GET_SET_TOGGLE |	OID_802_11_TX_ANTENNA_SELECTED)
-#define	RT_OID_802_11_SUPPORTED_RATES		  (OID_GET_SET_TOGGLE |	OID_802_11_SUPPORTED_RATES)
-#define	RT_OID_802_11_DESIRED_RATES			  (OID_GET_SET_TOGGLE |	OID_802_11_DESIRED_RATES)
-#define	RT_OID_802_11_CONFIGURATION			  (OID_GET_SET_TOGGLE |	OID_802_11_CONFIGURATION)
-#define	RT_OID_802_11_POWER_MODE			  (OID_GET_SET_TOGGLE |	OID_802_11_POWER_MODE)
-
-
-
-typedef enum _NDIS_802_11_STATUS_TYPE
-{
-    Ndis802_11StatusType_Authentication,
-    Ndis802_11StatusType_MediaStreamMode,
-    Ndis802_11StatusType_PMKID_CandidateList,
-    Ndis802_11StatusTypeMax    // not a real type, defined as an upper bound
-} NDIS_802_11_STATUS_TYPE, *PNDIS_802_11_STATUS_TYPE;
-
-typedef UCHAR   NDIS_802_11_MAC_ADDRESS[6];
-
-typedef struct _NDIS_802_11_STATUS_INDICATION
-{
-    NDIS_802_11_STATUS_TYPE StatusType;
-} NDIS_802_11_STATUS_INDICATION, *PNDIS_802_11_STATUS_INDICATION;
-
-// mask for authentication/integrity fields
-#define NDIS_802_11_AUTH_REQUEST_AUTH_FIELDS        0x0f
-
-#define NDIS_802_11_AUTH_REQUEST_REAUTH             0x01
-#define NDIS_802_11_AUTH_REQUEST_KEYUPDATE          0x02
-#define NDIS_802_11_AUTH_REQUEST_PAIRWISE_ERROR     0x06
-#define NDIS_802_11_AUTH_REQUEST_GROUP_ERROR        0x0E
-
-typedef struct _NDIS_802_11_AUTHENTICATION_REQUEST
-{
-    ULONG Length;            // Length of structure
-    NDIS_802_11_MAC_ADDRESS Bssid;
-    ULONG Flags;
-} NDIS_802_11_AUTHENTICATION_REQUEST, *PNDIS_802_11_AUTHENTICATION_REQUEST;
-
-//Added new types for PMKID Candidate lists.
-typedef struct _PMKID_CANDIDATE {
-    NDIS_802_11_MAC_ADDRESS BSSID;
-    ULONG Flags;
-} PMKID_CANDIDATE, *PPMKID_CANDIDATE;
-
-typedef struct _NDIS_802_11_PMKID_CANDIDATE_LIST
-{
-    ULONG Version;       // Version of the structure
-    ULONG NumCandidates; // No. of pmkid candidates
-    PMKID_CANDIDATE CandidateList[1];
-} NDIS_802_11_PMKID_CANDIDATE_LIST, *PNDIS_802_11_PMKID_CANDIDATE_LIST;
-
-//Flags for PMKID Candidate list structure
-#define NDIS_802_11_PMKID_CANDIDATE_PREAUTH_ENABLED	0x01
-
-// Added new types for OFDM 5G and 2.4G
-typedef enum _NDIS_802_11_NETWORK_TYPE
-{
-   Ndis802_11FH,
-   Ndis802_11DS,
-    Ndis802_11OFDM5,
-    Ndis802_11OFDM5_N,
-    Ndis802_11OFDM24,
-    Ndis802_11OFDM24_N,
-   Ndis802_11Automode,
-    Ndis802_11NetworkTypeMax    // not a real type, defined as an upper bound
-} NDIS_802_11_NETWORK_TYPE, *PNDIS_802_11_NETWORK_TYPE;
-
-typedef struct _NDIS_802_11_NETWORK_TYPE_LIST
-{
-    UINT                       NumberOfItems;  // in list below, at least 1
-   NDIS_802_11_NETWORK_TYPE    NetworkType [1];
-} NDIS_802_11_NETWORK_TYPE_LIST, *PNDIS_802_11_NETWORK_TYPE_LIST;
-
-typedef enum _NDIS_802_11_POWER_MODE
-{
-    Ndis802_11PowerModeCAM,
-    Ndis802_11PowerModeMAX_PSP,
-    Ndis802_11PowerModeFast_PSP,
-    Ndis802_11PowerModeLegacy_PSP,
-    Ndis802_11PowerModeMax      // not a real mode, defined as an upper bound
-} NDIS_802_11_POWER_MODE, *PNDIS_802_11_POWER_MODE;
-
-typedef ULONG   NDIS_802_11_TX_POWER_LEVEL; // in milliwatts
-
-//
-// Received Signal Strength Indication
-//
-typedef LONG    NDIS_802_11_RSSI;           // in dBm
-
-typedef struct _NDIS_802_11_CONFIGURATION_FH
-{
-   ULONG           Length;            // Length of structure
-   ULONG           HopPattern;        // As defined by 802.11, MSB set
-   ULONG           HopSet;            // to one if non-802.11
-   ULONG           DwellTime;         // units are Kusec
-} NDIS_802_11_CONFIGURATION_FH, *PNDIS_802_11_CONFIGURATION_FH;
-
-typedef struct _NDIS_802_11_CONFIGURATION
-{
-   ULONG                           Length;             // Length of structure
-   ULONG                           BeaconPeriod;       // units are Kusec
-   ULONG                           ATIMWindow;         // units are Kusec
-   ULONG                           DSConfig;           // Frequency, units are kHz
-   NDIS_802_11_CONFIGURATION_FH    FHConfig;
-} NDIS_802_11_CONFIGURATION, *PNDIS_802_11_CONFIGURATION;
-
-typedef struct _NDIS_802_11_STATISTICS
-{
-   ULONG           Length;             // Length of structure
-   LARGE_INTEGER   TransmittedFragmentCount;
-   LARGE_INTEGER   MulticastTransmittedFrameCount;
-   LARGE_INTEGER   FailedCount;
-   LARGE_INTEGER   RetryCount;
-   LARGE_INTEGER   MultipleRetryCount;
-   LARGE_INTEGER   RTSSuccessCount;
-   LARGE_INTEGER   RTSFailureCount;
-   LARGE_INTEGER   ACKFailureCount;
-   LARGE_INTEGER   FrameDuplicateCount;
-   LARGE_INTEGER   ReceivedFragmentCount;
-   LARGE_INTEGER   MulticastReceivedFrameCount;
-   LARGE_INTEGER   FCSErrorCount;
-   LARGE_INTEGER   TKIPLocalMICFailures;
-   LARGE_INTEGER   TKIPRemoteMICErrors;
-   LARGE_INTEGER   TKIPICVErrors;
-   LARGE_INTEGER   TKIPCounterMeasuresInvoked;
-   LARGE_INTEGER   TKIPReplays;
-   LARGE_INTEGER   CCMPFormatErrors;
-   LARGE_INTEGER   CCMPReplays;
-   LARGE_INTEGER   CCMPDecryptErrors;
-   LARGE_INTEGER   FourWayHandshakeFailures;
-} NDIS_802_11_STATISTICS, *PNDIS_802_11_STATISTICS;
-
-typedef  ULONG  NDIS_802_11_KEY_INDEX;
-typedef ULONGLONG   NDIS_802_11_KEY_RSC;
-
-#define MAX_RADIUS_SRV_NUM			2	  // 802.1x failover number
-
-typedef struct PACKED _RADIUS_SRV_INFO {
-	UINT32			radius_ip;
-	UINT32			radius_port;
-	UCHAR			radius_key[64];
-	UCHAR			radius_key_len;
-} RADIUS_SRV_INFO, *PRADIUS_SRV_INFO;
-
-typedef struct PACKED _RADIUS_KEY_INFO
-{
-	UCHAR			radius_srv_num;
-	RADIUS_SRV_INFO	radius_srv_info[MAX_RADIUS_SRV_NUM];
-	UCHAR			ieee8021xWEP;		 // dynamic WEP
-    UCHAR           key_index;
-    UCHAR           key_length;          // length of key in bytes
-    UCHAR           key_material[13];
-} RADIUS_KEY_INFO, *PRADIUS_KEY_INFO;
-
-// It's used by 802.1x daemon to require relative configuration
-typedef struct PACKED _RADIUS_CONF
-{
-    UINT32          Length;             // Length of this structure
-    UCHAR			mbss_num;			// indicate multiple BSS number
-	UINT32			own_ip_addr;
-	UINT32			retry_interval;
-	UINT32			session_timeout_interval;
-	UCHAR			EAPifname[IFNAMSIZ];
-	UCHAR			EAPifname_len;
-	UCHAR 			PreAuthifname[IFNAMSIZ];
-	UCHAR			PreAuthifname_len;
-	RADIUS_KEY_INFO	RadiusInfo[8/*MAX_MBSSID_NUM*/];
-} RADIUS_CONF, *PRADIUS_CONF;
-
-
-
-#ifdef CONFIG_STA_SUPPORT
-// Key mapping keys require a BSSID
-typedef struct _NDIS_802_11_KEY
-{
-    UINT           Length;             // Length of this structure
-    UINT           KeyIndex;
-    UINT           KeyLength;          // length of key in bytes
-    NDIS_802_11_MAC_ADDRESS BSSID;
-    NDIS_802_11_KEY_RSC KeyRSC;
-    UCHAR           KeyMaterial[1];     // variable length depending on above field
-} NDIS_802_11_KEY, *PNDIS_802_11_KEY;
-#endif // CONFIG_STA_SUPPORT //
-
-typedef struct _NDIS_802_11_REMOVE_KEY
-{
-    UINT           Length;             // Length of this structure
-    UINT           KeyIndex;
-    NDIS_802_11_MAC_ADDRESS BSSID;
-} NDIS_802_11_REMOVE_KEY, *PNDIS_802_11_REMOVE_KEY;
-
-typedef struct _NDIS_802_11_WEP
-{
-   UINT     Length;        // Length of this structure
-   UINT     KeyIndex;           // 0 is the per-client key, 1-N are the
-                                        // global keys
-   UINT     KeyLength;     // length of key in bytes
-   UCHAR     KeyMaterial[1];// variable length depending on above field
-} NDIS_802_11_WEP, *PNDIS_802_11_WEP;
-
-
-typedef enum _NDIS_802_11_NETWORK_INFRASTRUCTURE
-{
-   Ndis802_11IBSS,
-   Ndis802_11Infrastructure,
-   Ndis802_11AutoUnknown,
-   Ndis802_11Monitor,
-   Ndis802_11InfrastructureMax     // Not a real value, defined as upper bound
-} NDIS_802_11_NETWORK_INFRASTRUCTURE, *PNDIS_802_11_NETWORK_INFRASTRUCTURE;
-
-// Add new authentication modes
-typedef enum _NDIS_802_11_AUTHENTICATION_MODE
-{
-   Ndis802_11AuthModeOpen,
-   Ndis802_11AuthModeShared,
-   Ndis802_11AuthModeAutoSwitch,
-    Ndis802_11AuthModeWPA,
-    Ndis802_11AuthModeWPAPSK,
-    Ndis802_11AuthModeWPANone,
-   Ndis802_11AuthModeWPA2,
-   Ndis802_11AuthModeWPA2PSK,
-   	Ndis802_11AuthModeWPA1WPA2,
-	Ndis802_11AuthModeWPA1PSKWPA2PSK,
-   Ndis802_11AuthModeMax           // Not a real mode, defined as upper bound
-} NDIS_802_11_AUTHENTICATION_MODE, *PNDIS_802_11_AUTHENTICATION_MODE;
-
-typedef UCHAR   NDIS_802_11_RATES[NDIS_802_11_LENGTH_RATES];        // Set of 8 data rates
-typedef UCHAR   NDIS_802_11_RATES_EX[NDIS_802_11_LENGTH_RATES_EX];  // Set of 16 data rates
-
-typedef struct PACKED _NDIS_802_11_SSID
-{
-    UINT   SsidLength;         // length of SSID field below, in bytes;
-                                // this can be zero.
-    UCHAR   Ssid[NDIS_802_11_LENGTH_SSID];           // SSID information field
-} NDIS_802_11_SSID, *PNDIS_802_11_SSID;
-
-
-typedef struct PACKED _NDIS_WLAN_BSSID
-{
-   ULONG                               Length;     // Length of this structure
-   NDIS_802_11_MAC_ADDRESS             MacAddress; // BSSID
-   UCHAR                               Reserved[2];
-   NDIS_802_11_SSID                    Ssid;       // SSID
-   ULONG                               Privacy;    // WEP encryption requirement
-   NDIS_802_11_RSSI                    Rssi;       // receive signal strength in dBm
-   NDIS_802_11_NETWORK_TYPE            NetworkTypeInUse;
-   NDIS_802_11_CONFIGURATION           Configuration;
-   NDIS_802_11_NETWORK_INFRASTRUCTURE  InfrastructureMode;
-   NDIS_802_11_RATES                   SupportedRates;
-} NDIS_WLAN_BSSID, *PNDIS_WLAN_BSSID;
-
-typedef struct PACKED _NDIS_802_11_BSSID_LIST
-{
-   UINT           NumberOfItems;      // in list below, at least 1
-   NDIS_WLAN_BSSID Bssid[1];
-} NDIS_802_11_BSSID_LIST, *PNDIS_802_11_BSSID_LIST;
-
-// Added Capabilities, IELength and IEs for each BSSID
-typedef struct PACKED _NDIS_WLAN_BSSID_EX
-{
-    ULONG                               Length;             // Length of this structure
-    NDIS_802_11_MAC_ADDRESS             MacAddress;         // BSSID
-    UCHAR                               Reserved[2];
-    NDIS_802_11_SSID                    Ssid;               // SSID
-    UINT                                Privacy;            // WEP encryption requirement
-    NDIS_802_11_RSSI                    Rssi;               // receive signal
-                                                            // strength in dBm
-    NDIS_802_11_NETWORK_TYPE            NetworkTypeInUse;
-    NDIS_802_11_CONFIGURATION           Configuration;
-    NDIS_802_11_NETWORK_INFRASTRUCTURE  InfrastructureMode;
-    NDIS_802_11_RATES_EX                SupportedRates;
-    ULONG                               IELength;
-    UCHAR                               IEs[1];
-} NDIS_WLAN_BSSID_EX, *PNDIS_WLAN_BSSID_EX;
-
-typedef struct PACKED _NDIS_802_11_BSSID_LIST_EX
-{
-    UINT                   NumberOfItems;      // in list below, at least 1
-    NDIS_WLAN_BSSID_EX      Bssid[1];
-} NDIS_802_11_BSSID_LIST_EX, *PNDIS_802_11_BSSID_LIST_EX;
-
-typedef struct PACKED _NDIS_802_11_FIXED_IEs
-{
-    UCHAR Timestamp[8];
-    USHORT BeaconInterval;
-    USHORT Capabilities;
-} NDIS_802_11_FIXED_IEs, *PNDIS_802_11_FIXED_IEs;
-
-typedef struct _NDIS_802_11_VARIABLE_IEs
-{
-    UCHAR ElementID;
-    UCHAR Length;    // Number of bytes in data field
-    UCHAR data[1];
-} NDIS_802_11_VARIABLE_IEs, *PNDIS_802_11_VARIABLE_IEs;
-
-typedef  ULONG   NDIS_802_11_FRAGMENTATION_THRESHOLD;
-
-typedef  ULONG   NDIS_802_11_RTS_THRESHOLD;
-
-typedef  ULONG   NDIS_802_11_ANTENNA;
-
-typedef enum _NDIS_802_11_PRIVACY_FILTER
-{
-   Ndis802_11PrivFilterAcceptAll,
-   Ndis802_11PrivFilter8021xWEP
-} NDIS_802_11_PRIVACY_FILTER, *PNDIS_802_11_PRIVACY_FILTER;
-
-// Added new encryption types
-// Also aliased typedef to new name
-typedef enum _NDIS_802_11_WEP_STATUS
-{
-   Ndis802_11WEPEnabled,
-    Ndis802_11Encryption1Enabled = Ndis802_11WEPEnabled,
-   Ndis802_11WEPDisabled,
-    Ndis802_11EncryptionDisabled = Ndis802_11WEPDisabled,
-   Ndis802_11WEPKeyAbsent,
-    Ndis802_11Encryption1KeyAbsent = Ndis802_11WEPKeyAbsent,
-   Ndis802_11WEPNotSupported,
-    Ndis802_11EncryptionNotSupported = Ndis802_11WEPNotSupported,
-    Ndis802_11Encryption2Enabled,
-    Ndis802_11Encryption2KeyAbsent,
-    Ndis802_11Encryption3Enabled,
-    Ndis802_11Encryption3KeyAbsent,
-    Ndis802_11Encryption4Enabled,	// TKIP or AES mix
-    Ndis802_11Encryption4KeyAbsent,
-} NDIS_802_11_WEP_STATUS, *PNDIS_802_11_WEP_STATUS,
-  NDIS_802_11_ENCRYPTION_STATUS, *PNDIS_802_11_ENCRYPTION_STATUS;
-
-typedef enum _NDIS_802_11_RELOAD_DEFAULTS
-{
-   Ndis802_11ReloadWEPKeys
-} NDIS_802_11_RELOAD_DEFAULTS, *PNDIS_802_11_RELOAD_DEFAULTS;
-
-#define NDIS_802_11_AI_REQFI_CAPABILITIES      1
-#define NDIS_802_11_AI_REQFI_LISTENINTERVAL    2
-#define NDIS_802_11_AI_REQFI_CURRENTAPADDRESS  4
-
-#define NDIS_802_11_AI_RESFI_CAPABILITIES      1
-#define NDIS_802_11_AI_RESFI_STATUSCODE        2
-#define NDIS_802_11_AI_RESFI_ASSOCIATIONID     4
-
-typedef struct _NDIS_802_11_AI_REQFI
-{
-    USHORT Capabilities;
-    USHORT ListenInterval;
-    NDIS_802_11_MAC_ADDRESS  CurrentAPAddress;
-} NDIS_802_11_AI_REQFI, *PNDIS_802_11_AI_REQFI;
-
-typedef struct _NDIS_802_11_AI_RESFI
-{
-    USHORT Capabilities;
-    USHORT StatusCode;
-    USHORT AssociationId;
-} NDIS_802_11_AI_RESFI, *PNDIS_802_11_AI_RESFI;
-
-typedef struct _NDIS_802_11_ASSOCIATION_INFORMATION
-{
-    ULONG                   Length;
-    USHORT                  AvailableRequestFixedIEs;
-    NDIS_802_11_AI_REQFI    RequestFixedIEs;
-    ULONG                   RequestIELength;
-    ULONG                   OffsetRequestIEs;
-    USHORT                  AvailableResponseFixedIEs;
-    NDIS_802_11_AI_RESFI    ResponseFixedIEs;
-    ULONG                   ResponseIELength;
-    ULONG                   OffsetResponseIEs;
-} NDIS_802_11_ASSOCIATION_INFORMATION, *PNDIS_802_11_ASSOCIATION_INFORMATION;
-
-typedef struct _NDIS_802_11_AUTHENTICATION_EVENT
-{
-    NDIS_802_11_STATUS_INDICATION       Status;
-    NDIS_802_11_AUTHENTICATION_REQUEST  Request[1];
-} NDIS_802_11_AUTHENTICATION_EVENT, *PNDIS_802_11_AUTHENTICATION_EVENT;
-
-/*
-typedef struct _NDIS_802_11_TEST
-{
-    ULONG Length;
-    ULONG Type;
-    union
-    {
-        NDIS_802_11_AUTHENTICATION_EVENT AuthenticationEvent;
-        NDIS_802_11_RSSI RssiTrigger;
-    };
-} NDIS_802_11_TEST, *PNDIS_802_11_TEST;
- */
-
-// 802.11 Media stream constraints, associated with OID_802_11_MEDIA_STREAM_MODE
-typedef enum _NDIS_802_11_MEDIA_STREAM_MODE
-{
-    Ndis802_11MediaStreamOff,
-    Ndis802_11MediaStreamOn,
-} NDIS_802_11_MEDIA_STREAM_MODE, *PNDIS_802_11_MEDIA_STREAM_MODE;
-
-// PMKID Structures
-typedef UCHAR   NDIS_802_11_PMKID_VALUE[16];
-
-#ifdef CONFIG_STA_SUPPORT
-typedef struct _BSSID_INFO
-{
-    NDIS_802_11_MAC_ADDRESS BSSID;
-    NDIS_802_11_PMKID_VALUE PMKID;
-} BSSID_INFO, *PBSSID_INFO;
-
-typedef struct _NDIS_802_11_PMKID
-{
-    UINT    Length;
-    UINT    BSSIDInfoCount;
-    BSSID_INFO BSSIDInfo[1];
-} NDIS_802_11_PMKID, *PNDIS_802_11_PMKID;
-#endif // CONFIG_STA_SUPPORT //
-
-
-typedef struct _NDIS_802_11_AUTHENTICATION_ENCRYPTION
-{
-    NDIS_802_11_AUTHENTICATION_MODE AuthModeSupported;
-    NDIS_802_11_ENCRYPTION_STATUS EncryptStatusSupported;
-} NDIS_802_11_AUTHENTICATION_ENCRYPTION, *PNDIS_802_11_AUTHENTICATION_ENCRYPTION;
-
-typedef struct _NDIS_802_11_CAPABILITY
-{
-     ULONG Length;
-     ULONG Version;
-     ULONG NoOfPMKIDs;
-     ULONG NoOfAuthEncryptPairsSupported;
-     NDIS_802_11_AUTHENTICATION_ENCRYPTION AuthenticationEncryptionSupported[1];
-} NDIS_802_11_CAPABILITY, *PNDIS_802_11_CAPABILITY;
-
-//#endif //of WIN 2k
-#endif //UNDER_CE
-
-#if WIRELESS_EXT <= 11
-#ifndef SIOCDEVPRIVATE
-#define SIOCDEVPRIVATE                              0x8BE0
-#endif
-#define SIOCIWFIRSTPRIV								SIOCDEVPRIVATE
-#endif
-
-#ifdef CONFIG_STA_SUPPORT
-#define RT_PRIV_IOCTL_EXT							(SIOCIWFIRSTPRIV + 0x01) // Sync. with AP for wsc upnp daemon
-#define RTPRIV_IOCTL_SET							(SIOCIWFIRSTPRIV + 0x02)
-
-#ifdef DBG
-#define RTPRIV_IOCTL_BBP                            (SIOCIWFIRSTPRIV + 0x03)
-#define RTPRIV_IOCTL_MAC                            (SIOCIWFIRSTPRIV + 0x05)
-#define RTPRIV_IOCTL_RF                             (SIOCIWFIRSTPRIV + 0x13)
-#define RTPRIV_IOCTL_E2P                            (SIOCIWFIRSTPRIV + 0x07)
-#endif
-
-#ifdef RALINK_ATE
-#ifdef RALINK_28xx_QA
-#define RTPRIV_IOCTL_ATE							(SIOCIWFIRSTPRIV + 0x08)
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
-#define RTPRIV_IOCTL_STATISTICS                     (SIOCIWFIRSTPRIV + 0x09)
-#define RTPRIV_IOCTL_ADD_PMKID_CACHE                (SIOCIWFIRSTPRIV + 0x0A)
-#define RTPRIV_IOCTL_RADIUS_DATA                    (SIOCIWFIRSTPRIV + 0x0C)
-#define RTPRIV_IOCTL_GSITESURVEY					(SIOCIWFIRSTPRIV + 0x0D)
-#define RT_PRIV_IOCTL								(SIOCIWFIRSTPRIV + 0x0E) // Sync. with RT61 (for wpa_supplicant)
-#define RTPRIV_IOCTL_GET_MAC_TABLE					(SIOCIWFIRSTPRIV + 0x0F)
-
-#define RTPRIV_IOCTL_SHOW							(SIOCIWFIRSTPRIV + 0x11)
-enum {
-    SHOW_CONN_STATUS = 4,
-    SHOW_DRVIER_VERION = 5,
-    SHOW_BA_INFO = 6,
-	SHOW_DESC_INFO = 7,
-#ifdef RT2870
-	SHOW_RXBULK_INFO = 8,
-	SHOW_TXBULK_INFO = 9,
-#endif // RT2870 //
-    RAIO_OFF = 10,
-    RAIO_ON = 11,
-#ifdef QOS_DLS_SUPPORT
-	SHOW_DLS_ENTRY_INFO = 19,
-#endif // QOS_DLS_SUPPORT //
-	SHOW_CFG_VALUE = 20,
-};
-
-
-#endif // CONFIG_STA_SUPPORT //
-
-
-
-#ifdef SNMP_SUPPORT
-//SNMP ieee 802dot11, kathy , 2008_0220
-// dot11res(3)
-#define RT_OID_802_11_MANUFACTUREROUI			0x0700
-#define RT_OID_802_11_MANUFACTURERNAME			0x0701
-#define RT_OID_802_11_RESOURCETYPEIDNAME		0x0702
-
-// dot11smt(1)
-#define RT_OID_802_11_PRIVACYOPTIONIMPLEMENTED	0x0703
-#define RT_OID_802_11_POWERMANAGEMENTMODE		0x0704
-#define OID_802_11_WEPDEFAULTKEYVALUE			0x0705 // read , write
-#define OID_802_11_WEPDEFAULTKEYID				0x0706
-#define RT_OID_802_11_WEPKEYMAPPINGLENGTH		0x0707
-#define OID_802_11_SHORTRETRYLIMIT				0x0708
-#define OID_802_11_LONGRETRYLIMIT				0x0709
-#define RT_OID_802_11_PRODUCTID					0x0710
-#define RT_OID_802_11_MANUFACTUREID				0x0711
-
-// //dot11Phy(4)
-#define OID_802_11_CURRENTCHANNEL				0x0712
-
-//dot11mac
-#define RT_OID_802_11_MAC_ADDRESS				0x0713
-#endif // SNMP_SUPPORT //
-
-#define OID_802_11_BUILD_CHANNEL_EX				0x0714
-#define OID_802_11_GET_CH_LIST					0x0715
-#define OID_802_11_GET_COUNTRY_CODE				0x0716
-#define OID_802_11_GET_CHANNEL_GEOGRAPHY		0x0717
-
-//#define RT_OID_802_11_STATISTICS              (OID_GET_SET_TOGGLE | OID_802_11_STATISTICS)
-
-#ifdef CONFIG_STA_SUPPORT
-#define RT_OID_WSC_SET_PASSPHRASE                   0x0740 // passphrase for wpa(2)-psk
-#define RT_OID_WSC_DRIVER_AUTO_CONNECT              0x0741
-#define RT_OID_WSC_QUERY_DEFAULT_PROFILE            0x0742
-#define RT_OID_WSC_SET_CONN_BY_PROFILE_INDEX        0x0743
-#define RT_OID_WSC_SET_ACTION                       0x0744
-#define RT_OID_WSC_SET_SSID                         0x0745
-#define RT_OID_WSC_SET_PIN_CODE                     0x0746
-#define RT_OID_WSC_SET_MODE                         0x0747 // PIN or PBC
-#define RT_OID_WSC_SET_CONF_MODE                    0x0748 // Enrollee or Registrar
-#define RT_OID_WSC_SET_PROFILE                      0x0749
-#endif // CONFIG_STA_SUPPORT //
-#define RT_OID_802_11_WSC_QUERY_PROFILE				0x0750
-// for consistency with RT61
-#define RT_OID_WSC_QUERY_STATUS						0x0751
-#define RT_OID_WSC_PIN_CODE							0x0752
-#define RT_OID_WSC_UUID								0x0753
-#define RT_OID_WSC_SET_SELECTED_REGISTRAR			0x0754
-#define RT_OID_WSC_EAPMSG							0x0755
-#define RT_OID_WSC_MANUFACTURER						0x0756
-#define RT_OID_WSC_MODEL_NAME						0x0757
-#define RT_OID_WSC_MODEL_NO							0x0758
-#define RT_OID_WSC_SERIAL_NO						0x0759
-#define RT_OID_WSC_MAC_ADDRESS						0x0760
-
-#ifdef LLTD_SUPPORT
-// for consistency with RT61
-#define RT_OID_GET_PHY_MODE                         0x761
-#endif // LLTD_SUPPORT //
-
-#ifdef NINTENDO_AP
-//#define RT_OID_NINTENDO                             0x0D010770
-#define RT_OID_802_11_NINTENDO_GET_TABLE			0x0771 //((RT_OID_NINTENDO + 0x01) & 0xffff)
-#define RT_OID_802_11_NINTENDO_SET_TABLE			0x0772 //((RT_OID_NINTENDO + 0x02) & 0xffff)
-#define RT_OID_802_11_NINTENDO_CAPABLE				0x0773 //((RT_OID_NINTENDO + 0x03) & 0xffff)
-#endif // NINTENDO_AP //
-
-//Add Paul Chen for Accton
-//#define RT_OID_TX_POWER_LEVEL                 0xFF020010
-//#define RT_OID_SET_TX_POWER_LEVEL	          (OID_GET_SET_TOGGLE | RT_OID_TX_POWER_LEVEL)
-
-// New for MeetingHouse Api support
-#define OID_MH_802_1X_SUPPORTED               0xFFEDC100
-
-// MIMO Tx parameter, ShortGI, MCS, STBC, etc.  these are fields in TXWI. Don't change this definition!!!
-typedef union  _HTTRANSMIT_SETTING {
-#ifdef RT_BIG_ENDIAN
-	struct	{
-	USHORT		MODE:2;	// Use definition MODE_xxx.
-//	USHORT		rsv:3;
-	USHORT		TxBF:1;
-	USHORT		rsv:2;
-	USHORT		STBC:2;	//SPACE
-	USHORT		ShortGI:1;
-	USHORT		BW:1;	//channel bandwidth 20MHz or 40 MHz
-	USHORT   	MCS:7;                 // MCS
-	}	field;
-#else
-	struct	{
-	USHORT   	MCS:7;                 // MCS
-	USHORT		BW:1;	//channel bandwidth 20MHz or 40 MHz
-	USHORT		ShortGI:1;
-	USHORT		STBC:2;	//SPACE
-//	USHORT		rsv:3;
-	USHORT		rsv:2;
-	USHORT		TxBF:1;
-	USHORT		MODE:2;	// Use definition MODE_xxx.
-	}	field;
-#endif
-	USHORT		word;
- } HTTRANSMIT_SETTING, *PHTTRANSMIT_SETTING;
-
-typedef enum _RT_802_11_PREAMBLE {
-    Rt802_11PreambleLong,
-    Rt802_11PreambleShort,
-    Rt802_11PreambleAuto
-} RT_802_11_PREAMBLE, *PRT_802_11_PREAMBLE;
-
-// Only for STA, need to sync with AP
-// 2005-03-08 match current RaConfig.
-typedef enum _RT_802_11_PHY_MODE {
-	PHY_11BG_MIXED = 0,
-	PHY_11B,
-	PHY_11A,
-	PHY_11ABG_MIXED,
-	PHY_11G,
-#ifdef DOT11_N_SUPPORT
-	PHY_11ABGN_MIXED,	// both band   5
-	PHY_11N_2_4G,		// 11n-only with 2.4G band   	6
-	PHY_11GN_MIXED,	// 2.4G band      7
-	PHY_11AN_MIXED,	// 5G  band       8
-	PHY_11BGN_MIXED,	// if check 802.11b.      9
-	PHY_11AGN_MIXED,	// if check 802.11b.      10
-	PHY_11N_5G,			// 11n-only with 5G band		11
-#endif // DOT11_N_SUPPORT //
-} RT_802_11_PHY_MODE;
-
-// put all proprietery for-query objects here to reduce # of Query_OID
-typedef struct _RT_802_11_LINK_STATUS {
-    ULONG   CurrTxRate;         // in units of 0.5Mbps
-    ULONG   ChannelQuality;     // 0..100 %
-    ULONG   TxByteCount;        // both ok and fail
-    ULONG   RxByteCount;        // both ok and fail
-    ULONG	CentralChannel;		// 40MHz central channel number
-} RT_802_11_LINK_STATUS, *PRT_802_11_LINK_STATUS;
-
-typedef struct _RT_802_11_EVENT_LOG {
-    LARGE_INTEGER   SystemTime;  // timestammp via NdisGetCurrentSystemTime()
-    UCHAR           Addr[MAC_ADDR_LENGTH];
-    USHORT          Event;       // EVENT_xxx
-} RT_802_11_EVENT_LOG, *PRT_802_11_EVENT_LOG;
-
-typedef struct _RT_802_11_EVENT_TABLE {
-    ULONG       Num;
-    ULONG       Rsv;     // to align Log[] at LARGE_INEGER boundary
-    RT_802_11_EVENT_LOG   Log[MAX_NUMBER_OF_EVENT];
-} RT_802_11_EVENT_TABLE, PRT_802_11_EVENT_TABLE;
-
-// MIMO Tx parameter, ShortGI, MCS, STBC, etc.  these are fields in TXWI. Don't change this definition!!!
-typedef union  _MACHTTRANSMIT_SETTING {
-	struct	{
-	USHORT   	MCS:7;                 // MCS
-	USHORT		BW:1;	//channel bandwidth 20MHz or 40 MHz
-	USHORT		ShortGI:1;
-	USHORT		STBC:2;	//SPACE
-	USHORT		rsv:3;
-	USHORT		MODE:2;	// Use definition MODE_xxx.
-	}	field;
-	USHORT		word;
- } MACHTTRANSMIT_SETTING, *PMACHTTRANSMIT_SETTING;
-
-typedef struct _RT_802_11_MAC_ENTRY {
-    UCHAR       Addr[MAC_ADDR_LENGTH];
-    UCHAR       Aid;
-    UCHAR       Psm;     // 0:PWR_ACTIVE, 1:PWR_SAVE
-    UCHAR		MimoPs;  // 0:MMPS_STATIC, 1:MMPS_DYNAMIC, 3:MMPS_Enabled
-    CHAR		AvgRssi0;
-	CHAR		AvgRssi1;
-	CHAR		AvgRssi2;
-	UINT32		ConnectedTime;
-    MACHTTRANSMIT_SETTING	TxRate;
-} RT_802_11_MAC_ENTRY, *PRT_802_11_MAC_ENTRY;
-
-typedef struct _RT_802_11_MAC_TABLE {
-    ULONG       Num;
-    RT_802_11_MAC_ENTRY Entry[MAX_NUMBER_OF_MAC];
-} RT_802_11_MAC_TABLE, *PRT_802_11_MAC_TABLE;
-
-// structure for query/set hardware register - MAC, BBP, RF register
-typedef struct _RT_802_11_HARDWARE_REGISTER {
-    ULONG   HardwareType;       // 0:MAC, 1:BBP, 2:RF register, 3:EEPROM
-    ULONG   Offset;             // Q/S register offset addr
-    ULONG   Data;               // R/W data buffer
-} RT_802_11_HARDWARE_REGISTER, *PRT_802_11_HARDWARE_REGISTER;
-
-// structure to tune BBP R17 "RX AGC VGC init"
-//typedef struct _RT_802_11_RX_AGC_VGC_TUNING {
-//    UCHAR   FalseCcaLowerThreshold;  // 0-255, def 10
-//    UCHAR   FalseCcaUpperThreshold;  // 0-255, def 100
-//    UCHAR   VgcDelta;                // R17 +-= VgcDelta whenever flase CCA over UpprThreshold
-//                                     // or lower than LowerThresholdupper threshold
-//    UCHAR   VgcUpperBound;           // max value of R17
-//} RT_802_11_RX_AGC_VGC_TUNING, *PRT_802_11_RX_AGC_VGC_TUNING;
-
-typedef struct _RT_802_11_AP_CONFIG {
-    ULONG   EnableTxBurst;      // 0-disable, 1-enable
-    ULONG   EnableTurboRate;    // 0-disable, 1-enable 72/100mbps turbo rate
-    ULONG   IsolateInterStaTraffic;     // 0-disable, 1-enable isolation
-    ULONG   HideSsid;           // 0-disable, 1-enable hiding
-    ULONG   UseBGProtection;    // 0-AUTO, 1-always ON, 2-always OFF
-    ULONG   UseShortSlotTime;   // 0-no use, 1-use 9-us short slot time
-    ULONG   Rsv1;               // must be 0
-    ULONG   SystemErrorBitmap;  // ignore upon SET, return system error upon QUERY
-} RT_802_11_AP_CONFIG, *PRT_802_11_AP_CONFIG;
-
-// structure to query/set STA_CONFIG
-typedef struct _RT_802_11_STA_CONFIG {
-    ULONG   EnableTxBurst;      // 0-disable, 1-enable
-    ULONG   EnableTurboRate;    // 0-disable, 1-enable 72/100mbps turbo rate
-    ULONG   UseBGProtection;    // 0-AUTO, 1-always ON, 2-always OFF
-    ULONG   UseShortSlotTime;   // 0-no use, 1-use 9-us short slot time when applicable
-    ULONG   AdhocMode; 			// 0-11b rates only (WIFI spec), 1 - b/g mixed, 2 - g only
-    ULONG   HwRadioStatus;      // 0-OFF, 1-ON, default is 1, Read-Only
-    ULONG   Rsv1;               // must be 0
-    ULONG   SystemErrorBitmap;  // ignore upon SET, return system error upon QUERY
-} RT_802_11_STA_CONFIG, *PRT_802_11_STA_CONFIG;
-
-//
-//  For OID Query or Set about BA structure
-//
-typedef	struct	_OID_BACAP_STRUC	{
-		UCHAR		RxBAWinLimit;
-		UCHAR		TxBAWinLimit;
-		UCHAR		Policy;	// 0: DELAY_BA 1:IMMED_BA  (//BA Policy subfiled value in ADDBA frame)   2:BA-not use. other value invalid
-		UCHAR		MpduDensity;	// 0: DELAY_BA 1:IMMED_BA  (//BA Policy subfiled value in ADDBA frame)   2:BA-not use. other value invalid
-		UCHAR       	AmsduEnable;	//Enable AMSDU transmisstion
-		UCHAR       	AmsduSize;	// 0:3839, 1:7935 bytes. UINT  MSDUSizeToBytes[]	= { 3839, 7935};
-		UCHAR       	MMPSmode;	// MIMO power save more, 0:static, 1:dynamic, 2:rsv, 3:mimo enable
-		BOOLEAN		AutoBA;	// Auto BA will automatically
-} OID_BACAP_STRUC, *POID_BACAP_STRUC;
-
-typedef struct _RT_802_11_ACL_ENTRY {
-    UCHAR   Addr[MAC_ADDR_LENGTH];
-    USHORT  Rsv;
-} RT_802_11_ACL_ENTRY, *PRT_802_11_ACL_ENTRY;
-
-typedef struct PACKED _RT_802_11_ACL {
-    ULONG   Policy;             // 0-disable, 1-positive list, 2-negative list
-    ULONG   Num;
-    RT_802_11_ACL_ENTRY Entry[MAX_NUMBER_OF_ACL];
-} RT_802_11_ACL, *PRT_802_11_ACL;
-
-typedef struct _RT_802_11_WDS {
-    ULONG						Num;
-    NDIS_802_11_MAC_ADDRESS		Entry[24/*MAX_NUM_OF_WDS_LINK*/];
-	ULONG						KeyLength;
-	UCHAR						KeyMaterial[32];
-} RT_802_11_WDS, *PRT_802_11_WDS;
-
-typedef struct _RT_802_11_TX_RATES_ {
-    UCHAR       SupRateLen;
-    UCHAR       SupRate[MAX_LENGTH_OF_SUPPORT_RATES];
-    UCHAR       ExtRateLen;
-    UCHAR       ExtRate[MAX_LENGTH_OF_SUPPORT_RATES];
-} RT_802_11_TX_RATES, *PRT_802_11_TX_RATES;
-
-
-// Definition of extra information code
-#define	GENERAL_LINK_UP			0x0			// Link is Up
-#define	GENERAL_LINK_DOWN		0x1			// Link is Down
-#define	HW_RADIO_OFF			0x2			// Hardware radio off
-#define	SW_RADIO_OFF			0x3			// Software radio off
-#define	AUTH_FAIL				0x4			// Open authentication fail
-#define	AUTH_FAIL_KEYS			0x5			// Shared authentication fail
-#define	ASSOC_FAIL				0x6			// Association failed
-#define	EAP_MIC_FAILURE			0x7			// Deauthencation because MIC failure
-#define	EAP_4WAY_TIMEOUT		0x8			// Deauthencation on 4-way handshake timeout
-#define	EAP_GROUP_KEY_TIMEOUT	0x9			// Deauthencation on group key handshake timeout
-#define	EAP_SUCCESS				0xa			// EAP succeed
-#define	DETECT_RADAR_SIGNAL		0xb         // Radar signal occur in current channel
-#define EXTRA_INFO_MAX			0xb			// Indicate Last OID
-
-#define EXTRA_INFO_CLEAR		0xffffffff
-
-// This is OID setting structure. So only GF or MM as Mode. This is valid when our wirelss mode has 802.11n in use.
-typedef struct {
-	RT_802_11_PHY_MODE		PhyMode; 	//
-	UCHAR		TransmitNo;
-	UCHAR		HtMode; 	//HTMODE_GF or HTMODE_MM
-	UCHAR		ExtOffset;	//extension channel above or below
-	UCHAR		MCS;
-	UCHAR   	BW;
-	UCHAR		STBC;
-	UCHAR		SHORTGI;
-	UCHAR		rsv;
-} OID_SET_HT_PHYMODE, *POID_SET_HT_PHYMODE;
-
-#ifdef NINTENDO_AP
-#define NINTENDO_MAX_ENTRY 16
-#define NINTENDO_SSID_NAME_LN 8
-#define NINTENDO_SSID_NAME "NWCUSBAP"
-#define NINTENDO_PROBE_REQ_FLAG_MASK 0x03
-#define NINTENDO_PROBE_REQ_ON 0x01
-#define NINTENDO_PROBE_REQ_SIGNAL 0x02
-#define NINTENDO_PROBE_RSP_ON 0x01
-#define NINTENDO_SSID_NICKNAME_LN 20
-
-#define NINTENDO_WEPKEY_LN 13
-
-typedef struct _NINTENDO_SSID
-{
-	UCHAR	NINTENDOFixChar[NINTENDO_SSID_NAME_LN];
-	UCHAR	zero1;
-	UCHAR	registe;
-	UCHAR	ID;
-	UCHAR	zero2;
-	UCHAR	NICKname[NINTENDO_SSID_NICKNAME_LN];
-} RT_NINTENDO_SSID, *PRT_NINTENDO_SSID;
-
-typedef struct _NINTENDO_ENTRY
-{
-	UCHAR	NICKname[NINTENDO_SSID_NICKNAME_LN];
-    UCHAR   DS_Addr[ETH_LENGTH_OF_ADDRESS];
-	UCHAR	registe;
-	UCHAR	UserSpaceAck;
-} RT_NINTENDO_ENTRY, *PRT_NINTENDO_ENTRY;
-
-//RTPRIV_IOCTL_NINTENDO_GET_TABLE
-//RTPRIV_IOCTL_NINTENDO_SET_TABLE
-typedef struct _NINTENDO_TABLE
-{
-	UINT				number;
-	RT_NINTENDO_ENTRY	entry[NINTENDO_MAX_ENTRY];
-} RT_NINTENDO_TABLE, *PRT_NINTENDO_TABLE;
-
-//RTPRIV_IOCTL_NINTENDO_SEED_WEPKEY
-typedef struct _NINTENDO_SEED_WEPKEY
-{
-	UCHAR	seed[NINTENDO_SSID_NICKNAME_LN];
-	UCHAR	wepkey[16];//use 13 for 104 bits wep key
-} RT_NINTENDO_SEED_WEPKEY, *PRT_NINTENDO_SEED_WEPKEY;
-#endif // NINTENDO_AP //
-
-#ifdef LLTD_SUPPORT
-typedef struct _RT_LLTD_ASSOICATION_ENTRY {
-    UCHAR           Addr[ETH_LENGTH_OF_ADDRESS];
-    unsigned short  MOR;        // maximum operational rate
-    UCHAR           phyMode;
-} RT_LLTD_ASSOICATION_ENTRY, *PRT_LLTD_ASSOICATION_ENTRY;
-
-typedef struct _RT_LLTD_ASSOICATION_TABLE {
-    unsigned int                Num;
-    RT_LLTD_ASSOICATION_ENTRY   Entry[MAX_NUMBER_OF_MAC];
-} RT_LLTD_ASSOICATION_TABLE, *PRT_LLTD_ASSOICATION_TABLE;
-#endif // LLTD_SUPPORT //
-
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-//rt2860, kathy 2007-0118
-// structure for DLS
-typedef struct _RT_802_11_DLS_UI {
-	USHORT						TimeOut;		// unit: second , set by UI
-	USHORT						CountDownTimer;	// unit: second , used by driver only
-	NDIS_802_11_MAC_ADDRESS		MacAddr;		// set by UI
-	UCHAR						Status;			// 0: none , 1: wait STAkey, 2: finish DLS setup , set by driver only
-	BOOLEAN						Valid;			// 1: valid , 0: invalid , set by UI, use to setup or tear down DLS link
-} RT_802_11_DLS_UI, *PRT_802_11_DLS_UI;
-
-typedef struct _RT_802_11_DLS_INFO {
-	RT_802_11_DLS_UI	Entry[MAX_NUMBER_OF_DLS_ENTRY];
-	UCHAR				num;
-} RT_802_11_DLS_INFO, *PRT_802_11_DLS_INFO;
-
-typedef enum _RT_802_11_DLS_MODE {
-    DLS_NONE,
-    DLS_WAIT_KEY,
-    DLS_FINISH
-} RT_802_11_DLS_MODE;
-#endif // QOS_DLS_SUPPORT //
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-#define	RT_ASSOC_EVENT_FLAG                         0x0101
-#define	RT_DISASSOC_EVENT_FLAG                      0x0102
-#define	RT_REQIE_EVENT_FLAG                         0x0103
-#define	RT_RESPIE_EVENT_FLAG                        0x0104
-#define	RT_ASSOCINFO_EVENT_FLAG                     0x0105
-#define RT_PMKIDCAND_FLAG                           0x0106
-#define RT_INTERFACE_DOWN                           0x0107
-#define RT_INTERFACE_UP                             0x0108
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
-
-#define MAX_CUSTOM_LEN 128
-
-#ifdef CONFIG_STA_SUPPORT
-typedef enum _RT_802_11_D_CLIENT_MODE
-{
-   Rt802_11_D_None,
-   Rt802_11_D_Flexible,
-   Rt802_11_D_Strict,
-} RT_802_11_D_CLIENT_MODE, *PRT_802_11_D_CLIENT_MODE;
-#endif // CONFIG_STA_SUPPORT //
-
-typedef struct _RT_CHANNEL_LIST_INFO
-{
-	UCHAR ChannelList[MAX_NUM_OF_CHS];   // list all supported channels for site survey
-	UCHAR ChannelListNum; // number of channel in ChannelList[]
-} RT_CHANNEL_LIST_INFO, *PRT_CHANNEL_LIST_INFO;
-
-// WSC configured credential
-typedef	struct	_WSC_CREDENTIAL
-{
-	NDIS_802_11_SSID	SSID;				// mandatory
-	USHORT				AuthType;			// mandatory, 1: open, 2: wpa-psk, 4: shared, 8:wpa, 0x10: wpa2, 0x20: wpa2-psk
-	USHORT				EncrType;			// mandatory, 1: none, 2: wep, 4: tkip, 8: aes
-	UCHAR				Key[64];			// mandatory, Maximum 64 byte
-	USHORT				KeyLength;
-	UCHAR				MacAddr[6];			// mandatory, AP MAC address
-	UCHAR				KeyIndex;			// optional, default is 1
-	UCHAR				Rsvd[3];			// Make alignment
-}	WSC_CREDENTIAL, *PWSC_CREDENTIAL;
-
-// WSC configured profiles
-typedef	struct	_WSC_PROFILE
-{
-	UINT			ProfileCnt;
-	WSC_CREDENTIAL	Profile[8];				// Support up to 8 profiles
-}	WSC_PROFILE, *PWSC_PROFILE;
-
-
-
-#endif // _OID_H_
-
+#include "../rt2870/oid.h"
diff --git a/drivers/staging/rt3070/rt2870.h b/drivers/staging/rt3070/rt2870.h
index d32a2bf1d04..16d8717b9db 100644
--- a/drivers/staging/rt3070/rt2870.h
+++ b/drivers/staging/rt3070/rt2870.h
@@ -1,756 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-#ifndef __RT2870_H__
-#define __RT2870_H__
-
-//usb header files
-#include <linux/usb.h>
-
-/* rtmp_def.h */
-//
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-#define BULKAGGRE_ZISE          100
-#define RT28XX_DRVDATA_SET(_a)                                             usb_set_intfdata(_a, pAd);
-#define RT28XX_PUT_DEVICE                                                  usb_put_dev
-#define RTUSB_ALLOC_URB(iso)                                               usb_alloc_urb(iso, GFP_ATOMIC)
-#define RTUSB_SUBMIT_URB(pUrb)                                             usb_submit_urb(pUrb, GFP_ATOMIC)
-#define	RTUSB_URB_ALLOC_BUFFER(pUsb_Dev, BufSize, pDma_addr)               usb_buffer_alloc(pUsb_Dev, BufSize, GFP_ATOMIC, pDma_addr)
-#define	RTUSB_URB_FREE_BUFFER(pUsb_Dev, BufSize, pTransferBuf, Dma_addr)   usb_buffer_free(pUsb_Dev, BufSize, pTransferBuf, Dma_addr)
-#else
-#define BULKAGGRE_ZISE          60
-#define RT28XX_DRVDATA_SET(_a)
-#define RT28XX_PUT_DEVICE(dev_p)
-#define RTUSB_ALLOC_URB(iso)                                               usb_alloc_urb(iso)
-#define RTUSB_SUBMIT_URB(pUrb)                                             usb_submit_urb(pUrb)
-#define RTUSB_URB_ALLOC_BUFFER(pUsb_Dev, BufSize, pDma_addr)               kmalloc(BufSize, GFP_ATOMIC)
-#define	RTUSB_URB_FREE_BUFFER(pUsb_Dev, BufSize, pTransferBuf, Dma_addr)   kfree(pTransferBuf)
-#endif
-
-#define RXBULKAGGRE_ZISE        12
-#define MAX_TXBULK_LIMIT        (LOCAL_TXBUF_SIZE*(BULKAGGRE_ZISE-1))
-#define MAX_TXBULK_SIZE         (LOCAL_TXBUF_SIZE*BULKAGGRE_ZISE)
-#define MAX_RXBULK_SIZE         (LOCAL_TXBUF_SIZE*RXBULKAGGRE_ZISE)
-#define MAX_MLME_HANDLER_MEMORY 20
-#define BUFFER_SIZE				2400	//2048
-#define	TX_RING					0xa
-#define	PRIO_RING				0xc
-
-
-// Flags for Bulkflags control for bulk out data
-//
-#define	fRTUSB_BULK_OUT_DATA_NULL				0x00000001
-#define fRTUSB_BULK_OUT_RTS						0x00000002
-#define	fRTUSB_BULK_OUT_MLME					0x00000004
-
-#define	fRTUSB_BULK_OUT_DATA_NORMAL				0x00010000
-#define	fRTUSB_BULK_OUT_DATA_NORMAL_2			0x00020000
-#define	fRTUSB_BULK_OUT_DATA_NORMAL_3			0x00040000
-#define	fRTUSB_BULK_OUT_DATA_NORMAL_4			0x00080000
-#define	fRTUSB_BULK_OUT_DATA_NORMAL_5			0x00100000
-
-#define	fRTUSB_BULK_OUT_PSPOLL					0x00000020
-#define	fRTUSB_BULK_OUT_DATA_FRAG				0x00000040
-#define	fRTUSB_BULK_OUT_DATA_FRAG_2				0x00000080
-#define	fRTUSB_BULK_OUT_DATA_FRAG_3				0x00000100
-#define	fRTUSB_BULK_OUT_DATA_FRAG_4				0x00000200
-
-#ifdef RALINK_ATE
-#define	fRTUSB_BULK_OUT_DATA_ATE				0x00100000
-#endif // RALINK_ATE //
-
-#define RT2870_USB_DEVICES	\
-{	\
-	{USB_DEVICE(0x148F,0x2770)}, /* Ralink */		\
-	{USB_DEVICE(0x148F,0x2870)}, /* Ralink */		\
-	{USB_DEVICE(0x148F,0x3070)}, /* Ralink 3070 */	\
-	{USB_DEVICE(0x148F,0x3071)}, /* Ralink 3071 */	\
-	{USB_DEVICE(0x148F,0x3072)}, /* Ralink 3072 */	\
-	{USB_DEVICE(0x0B05,0x1731)}, /* Asus */			\
-	{USB_DEVICE(0x0B05,0x1732)}, /* Asus */			\
-	{USB_DEVICE(0x0B05,0x1742)}, /* Asus */			\
-	{USB_DEVICE(0x0DF6,0x0017)}, /* Sitecom */		\
-	{USB_DEVICE(0x0DF6,0x002B)}, /* Sitecom */		\
-	{USB_DEVICE(0x0DF6,0x002C)}, /* Sitecom */		\
-	{USB_DEVICE(0x0DF6,0x003E)}, /* Sitecom 3070 */	\
-	{USB_DEVICE(0x0DF6,0x002D)}, /* Sitecom */		\
-	{USB_DEVICE(0x0DF6,0x0039)}, /* Sitecom 2770 */	\
-	{USB_DEVICE(0x14B2,0x3C06)}, /* Conceptronic */	\
-	{USB_DEVICE(0x14B2,0x3C28)}, /* Conceptronic */	\
-	{USB_DEVICE(0x2019,0xED06)}, /* Planex Communications, Inc. */		\
-	{USB_DEVICE(0x2019,0xAB25)}, /* Planex Communications, Inc. RT3070 */		\
-	{USB_DEVICE(0x07D1,0x3C09)}, /* D-Link */		\
-	{USB_DEVICE(0x07D1,0x3C11)}, /* D-Link */		\
-	{USB_DEVICE(0x2001,0x3C09)}, /* D-Link */		\
-	{USB_DEVICE(0x2001,0x3C0A)}, /* D-Link 3072*/	\
-	{USB_DEVICE(0x14B2,0x3C07)}, /* AL */			\
-	{USB_DEVICE(0x14B2,0x3C12)}, /* AL 3070 */		\
-	{USB_DEVICE(0x050D,0x8053)}, /* Belkin */		\
-	{USB_DEVICE(0x14B2,0x3C23)}, /* Airlink */		\
-	{USB_DEVICE(0x14B2,0x3C27)}, /* Airlink */		\
-	{USB_DEVICE(0x07AA,0x002F)}, /* Corega */		\
-	{USB_DEVICE(0x07AA,0x003C)}, /* Corega */		\
-	{USB_DEVICE(0x07AA,0x003F)}, /* Corega */		\
-	{USB_DEVICE(0x18C5,0x0012)}, /* Corega 3070 */	\
-	{USB_DEVICE(0x1044,0x800B)}, /* Gigabyte */		\
-	{USB_DEVICE(0x1044,0x800D)}, /* Gigabyte GN-WB32L 3070 */		\
-	{USB_DEVICE(0x15A9,0x0006)}, /* Sparklan */		\
-	{USB_DEVICE(0x083A,0xB522)}, /* SMC */			\
-	{USB_DEVICE(0x083A,0xA618)}, /* SMC */			\
-	{USB_DEVICE(0x083A,0x8522)}, /* Arcadyan */		\
-	{USB_DEVICE(0x083A,0x7512)}, /* Arcadyan 2770 */		\
-	{USB_DEVICE(0x083A,0x7522)}, /* Arcadyan */		\
-	{USB_DEVICE(0x083A,0x7511)}, /* Arcadyan 3070 */ \
-	{USB_DEVICE(0x0CDE,0x0022)}, /* ZCOM */			\
-	{USB_DEVICE(0x0586,0x3416)}, /* Zyxel */		\
-	{USB_DEVICE(0x0CDE,0x0025)}, /* Zyxel */		\
-	{USB_DEVICE(0x1740,0x9701)}, /* EnGenius */		\
-	{USB_DEVICE(0x1740,0x9702)}, /* EnGenius */		\
-	{USB_DEVICE(0x1740,0x9703)}, /* EnGenius 3070 */		\
-	{USB_DEVICE(0x0471,0x200f)}, /* Philips */		\
-	{USB_DEVICE(0x14B2,0x3C25)}, /* Draytek */		\
-	{USB_DEVICE(0x13D3,0x3247)}, /* AzureWave */	\
-	{USB_DEVICE(0x13D3,0x3273)}, /* AzureWave 3070*/	\
-	{USB_DEVICE(0x083A,0x6618)}, /* Accton */		\
-	{USB_DEVICE(0x15c5,0x0008)}, /* Amit */			\
-	{USB_DEVICE(0x0E66,0x0001)}, /* Hawking */		\
-	{USB_DEVICE(0x0E66,0x0003)}, /* Hawking */		\
-	{USB_DEVICE(0x129B,0x1828)}, /* Siemens */		\
-	{USB_DEVICE(0x157E,0x300E)}, /* U-Media */		\
-	{USB_DEVICE(0x050d,0x805c)},					\
-	{USB_DEVICE(0x1482,0x3C09)}, /* Abocom*/		\
-	{USB_DEVICE(0x14B2,0x3C09)}, /* Alpha */		\
-	{USB_DEVICE(0x04E8,0x2018)}, /* samsung */  	\
-	{USB_DEVICE(0x07B8,0x3070)}, /* AboCom 3070 */	\
-	{USB_DEVICE(0x07B8,0x3071)}, /* AboCom 3071 */	\
-	{USB_DEVICE(0x07B8,0x3072)}, /* Abocom 3072 */	\
-	{USB_DEVICE(0x7392,0x7711)}, /* Edimax 3070 */	\
-	{USB_DEVICE(0x5A57,0x0280)}, /* Zinwell */		\
-	{USB_DEVICE(0x5A57,0x0282)}, /* Zinwell */		\
-	{USB_DEVICE(0x1A32,0x0304)}, /* Quanta 3070 */		\
-	{USB_DEVICE(0x0789,0x0162)}, /* Logitec 2870 */		\
-	{USB_DEVICE(0x0789,0x0163)}, /* Logitec 2870 */		\
-	{USB_DEVICE(0x0789,0x0164)}, /* Logitec 2870 */		\
-	{USB_DEVICE(0x1EDA,0x2310)}, /* AirTies 3070 */		\
-	{ }/* Terminating entry */                      \
-}
-
-#define	FREE_HTTX_RING(_p, _b, _t)			\
-{										\
-	if ((_t)->ENextBulkOutPosition == (_t)->CurWritePosition)				\
-	{																	\
-		(_t)->bRingEmpty = TRUE;			\
-	}																	\
-	/*NdisInterlockedDecrement(&(_p)->TxCount); */\
-}
-
-//
-// RXINFO appends at the end of each rx packet.
-//
-#ifdef RT_BIG_ENDIAN
-typedef	struct	PACKED _RXINFO_STRUC {
-	UINT32		PlcpSignal:12;
-	UINT32		LastAMSDU:1;
-	UINT32		CipherAlg:1;
-	UINT32		PlcpRssil:1;
-	UINT32		Decrypted:1;
-	UINT32		AMPDU:1;		// To be moved
-	UINT32		L2PAD:1;
-	UINT32		RSSI:1;
-	UINT32		HTC:1;
-	UINT32		AMSDU:1;		// rx with 802.3 header, not 802.11 header.
-	UINT32		CipherErr:2;        // 0: decryption okay, 1:ICV error, 2:MIC error, 3:KEY not valid
-	UINT32		Crc:1;              // 1: CRC error
-	UINT32		MyBss:1;  	// 1: this frame belongs to the same BSSID
-	UINT32		Bcast:1;            // 1: this is a broadcast frame
-	UINT32		Mcast:1;            // 1: this is a multicast frame
-	UINT32		U2M:1;              // 1: this RX frame is unicast to me
-	UINT32		FRAG:1;
-	UINT32		NULLDATA:1;
-	UINT32		DATA:1;
-	UINT32		BA:1;
-}	RXINFO_STRUC, *PRXINFO_STRUC, RT28XX_RXD_STRUC, *PRT28XX_RXD_STRUC;
-#else
-typedef	struct	PACKED _RXINFO_STRUC {
-	UINT32		BA:1;
-	UINT32		DATA:1;
-	UINT32		NULLDATA:1;
-	UINT32		FRAG:1;
-	UINT32		U2M:1;              // 1: this RX frame is unicast to me
-	UINT32		Mcast:1;            // 1: this is a multicast frame
-	UINT32		Bcast:1;            // 1: this is a broadcast frame
-	UINT32		MyBss:1;  	// 1: this frame belongs to the same BSSID
-	UINT32		Crc:1;              // 1: CRC error
-	UINT32		CipherErr:2;        // 0: decryption okay, 1:ICV error, 2:MIC error, 3:KEY not valid
-	UINT32		AMSDU:1;		// rx with 802.3 header, not 802.11 header.
-	UINT32		HTC:1;
-	UINT32		RSSI:1;
-	UINT32		L2PAD:1;
-	UINT32		AMPDU:1;		// To be moved
-	UINT32		Decrypted:1;
-	UINT32		PlcpRssil:1;
-	UINT32		CipherAlg:1;
-	UINT32		LastAMSDU:1;
-	UINT32		PlcpSignal:12;
-}	RXINFO_STRUC, *PRXINFO_STRUC, RT28XX_RXD_STRUC, *PRT28XX_RXD_STRUC;
-#endif
-
-
-//
-// TXINFO
-//
-#ifdef RT_BIG_ENDIAN
-typedef	struct	_TXINFO_STRUC {
-	// Word	0
-	UINT32		USBDMATxburst:1;//used ONLY in USB bulk Aggre. Force USB DMA transmit frame from current selected endpoint
-	UINT32		USBDMANextVLD:1;	//used ONLY in USB bulk Aggregation, NextValid
-	UINT32		rsv2:2;  // Software use.
-	UINT32		SwUseLastRound:1; // Software use.
-	UINT32		QSEL:2;	// select on-chip FIFO ID for 2nd-stage output scheduler.0:MGMT, 1:HCCA 2:EDCA
-	UINT32		WIV:1;	// Wireless Info Valid. 1 if Driver already fill WI,  o if DMA needs to copy WI to correctposition
-	UINT32		rsv:8;
-	UINT32		USBDMATxPktLen:16;	//used ONLY in USB bulk Aggregation,  Total byte counts of all sub-frame.
-}	TXINFO_STRUC, *PTXINFO_STRUC;
-#else
-typedef	struct	_TXINFO_STRUC {
-	// Word	0
-	UINT32		USBDMATxPktLen:16;	//used ONLY in USB bulk Aggregation,  Total byte counts of all sub-frame.
-	UINT32		rsv:8;
-	UINT32		WIV:1;	// Wireless Info Valid. 1 if Driver already fill WI,  o if DMA needs to copy WI to correctposition
-	UINT32		QSEL:2;	// select on-chip FIFO ID for 2nd-stage output scheduler.0:MGMT, 1:HCCA 2:EDCA
-	UINT32		SwUseLastRound:1; // Software use.
-	UINT32		rsv2:2;  // Software use.
-	UINT32		USBDMANextVLD:1;	//used ONLY in USB bulk Aggregation, NextValid
-	UINT32		USBDMATxburst:1;//used ONLY in USB bulk Aggre. Force USB DMA transmit frame from current selected endpoint
-}	TXINFO_STRUC, *PTXINFO_STRUC;
-#endif
-
-#define TXINFO_SIZE				4
-#define RXINFO_SIZE				4
-#define TXPADDING_SIZE			11
-
-//
-// Management ring buffer format
-//
-typedef	struct	_MGMT_STRUC	{
-	BOOLEAN		Valid;
-	PUCHAR		pBuffer;
-	ULONG		Length;
-}	MGMT_STRUC, *PMGMT_STRUC;
-
-
-/* ----------------- EEPROM Related MACRO ----------------- */
-#ifdef RT30xx
-#define RT28xx_EEPROM_READ16(pAd, offset, var)					\
-	do {														\
-		RTUSBReadEEPROM(pAd, offset, (PUCHAR)&(var), 2);		\
-		if(!pAd->bUseEfuse)										\
-			var = le2cpu16(var);								\
-	}while(0)
-
-#define RT28xx_EEPROM_WRITE16(pAd, offset, var)					\
-	do{															\
-		USHORT _tmpVar=var;										\
-		if(!pAd->bUseEfuse)									\
-		_tmpVar = cpu2le16(var);								\
-		RTUSBWriteEEPROM(pAd, offset, (PUCHAR)&(_tmpVar), 2);	\
-	}while(0)
-#endif // RT30xx //
-#ifndef RT30xx
-#define RT28xx_EEPROM_READ16(pAd, offset, var)					\
-	do {														\
-		RTUSBReadEEPROM(pAd, offset, (PUCHAR)&(var), 2);		\
-			var = le2cpu16(var);								\
-	}while(0)
-
-#define RT28xx_EEPROM_WRITE16(pAd, offset, var)					\
-	do{															\
-		USHORT _tmpVar=var;										\
-		_tmpVar = cpu2le16(var);								\
-		RTUSBWriteEEPROM(pAd, offset, (PUCHAR)&(_tmpVar), 2);	\
-	}while(0)
-#endif // RT30xx //
-
-/* ----------------- TASK/THREAD Related MACRO ----------------- */
-#define RT28XX_TASK_THREAD_INIT(pAd, Status)		\
-	Status = CreateThreads(net_dev);
-
-
-/* ----------------- Frimware Related MACRO ----------------- */
-#define RT28XX_WRITE_FIRMWARE(_pAd, _pFwImage, _FwLen)		\
-	RTUSBFirmwareWrite(_pAd, _pFwImage, _FwLen)
-
-/* ----------------- TX Related MACRO ----------------- */
-#define RT28XX_START_DEQUEUE(pAd, QueIdx, irqFlags)				\
-			{													\
-				RTMP_IRQ_LOCK(&pAd->DeQueueLock[QueIdx], irqFlags);		\
-				if (pAd->DeQueueRunning[QueIdx])						\
-				{														\
-					RTMP_IRQ_UNLOCK(&pAd->DeQueueLock[QueIdx], irqFlags);\
-					printk("DeQueueRunning[%d]= TRUE!\n", QueIdx);		\
-					continue;											\
-				}														\
-				else													\
-				{														\
-					pAd->DeQueueRunning[QueIdx] = TRUE;					\
-					RTMP_IRQ_UNLOCK(&pAd->DeQueueLock[QueIdx], irqFlags);\
-				}														\
-			}
-#define RT28XX_STOP_DEQUEUE(pAd, QueIdx, irqFlags)						\
-			do{															\
-				RTMP_IRQ_LOCK(&pAd->DeQueueLock[QueIdx], irqFlags);		\
-				pAd->DeQueueRunning[QueIdx] = FALSE;					\
-				RTMP_IRQ_UNLOCK(&pAd->DeQueueLock[QueIdx], irqFlags);	\
-			}while(0)
-
-
-#define	RT28XX_HAS_ENOUGH_FREE_DESC(pAd, pTxBlk, freeNum, pPacket) \
-		(RTUSBFreeDescriptorRequest(pAd, pTxBlk->QueIdx, (pTxBlk->TotalFrameLen + GET_OS_PKT_LEN(pPacket))) == NDIS_STATUS_SUCCESS)
-
-#define RT28XX_RELEASE_DESC_RESOURCE(pAd, QueIdx)			\
-		do{}while(0)
-
-#define NEED_QUEUE_BACK_FOR_AGG(_pAd, _QueIdx, _freeNum, _TxFrameType) 		\
-		((_TxFrameType == TX_RALINK_FRAME) && (RTUSBNeedQueueBackForAgg(_pAd, _QueIdx)))
-
-
-
-#define fRTMP_ADAPTER_NEED_STOP_TX		\
-		(fRTMP_ADAPTER_NIC_NOT_EXIST | fRTMP_ADAPTER_HALT_IN_PROGRESS |	\
-		 fRTMP_ADAPTER_RESET_IN_PROGRESS | fRTMP_ADAPTER_BULKOUT_RESET | \
-		 fRTMP_ADAPTER_RADIO_OFF | fRTMP_ADAPTER_REMOVE_IN_PROGRESS)
-
-
-#define HAL_WriteSubTxResource(pAd, pTxBlk, bIsLast, pFreeNumber)	\
-			RtmpUSB_WriteSubTxResource(pAd, pTxBlk, bIsLast, pFreeNumber)
-
-#define HAL_WriteTxResource(pAd, pTxBlk,bIsLast, pFreeNumber)	\
-			RtmpUSB_WriteSingleTxResource(pAd, pTxBlk,bIsLast, pFreeNumber)
-
-#define HAL_WriteFragTxResource(pAd, pTxBlk, fragNum, pFreeNumber) \
-			RtmpUSB_WriteFragTxResource(pAd, pTxBlk, fragNum, pFreeNumber)
-
-#define HAL_WriteMultiTxResource(pAd, pTxBlk,frameNum, pFreeNumber)	\
-			RtmpUSB_WriteMultiTxResource(pAd, pTxBlk,frameNum, pFreeNumber)
-
-#define HAL_FinalWriteTxResource(pAd, pTxBlk, totalMPDUSize, TxIdx)	\
-			RtmpUSB_FinalWriteTxResource(pAd, pTxBlk, totalMPDUSize, TxIdx)
-
-#define HAL_LastTxIdx(pAd, QueIdx,TxIdx) \
-			/*RtmpUSBDataLastTxIdx(pAd, QueIdx,TxIdx)*/
-
-#define HAL_KickOutTx(pAd, pTxBlk, QueIdx)	\
-			RtmpUSBDataKickOut(pAd, pTxBlk, QueIdx)
-
-
-#define HAL_KickOutMgmtTx(pAd, QueIdx, pPacket, pSrcBufVA, SrcBufLen)	\
-			RtmpUSBMgmtKickOut(pAd, QueIdx, pPacket, pSrcBufVA, SrcBufLen)
-
-#define HAL_KickOutNullFrameTx(_pAd, _QueIdx, _pNullFrame, _frameLen)	\
-			RtmpUSBNullFrameKickOut(_pAd, _QueIdx, _pNullFrame, _frameLen)
-
-#define RTMP_PKT_TAIL_PADDING 	11 // 3(max 4 byte padding) + 4 (last packet padding) + 4 (MaxBulkOutsize align padding)
-
-extern UCHAR EpToQueue[6];
-
-
-#ifdef RT2870
-#define GET_TXRING_FREENO(_pAd, _QueIdx) 	(_QueIdx) //(_pAd->TxRing[_QueIdx].TxSwFreeIdx)
-#define GET_MGMTRING_FREENO(_pAd) 			(_pAd->MgmtRing.TxSwFreeIdx)
-#endif // RT2870 //
-
-
-/* ----------------- RX Related MACRO ----------------- */
-//#define RT28XX_RX_ERROR_CHECK				RTMPCheckRxWI
-
-#define RT28XX_RV_ALL_BUF_END(bBulkReceive)		\
-	/* We return STATUS_MORE_PROCESSING_REQUIRED so that the completion */	\
-	/* routine (IofCompleteRequest) will stop working on the irp. */		\
-	if (bBulkReceive == TRUE)	RTUSBBulkReceive(pAd);
-
-
-/* ----------------- ASIC Related MACRO ----------------- */
-// reset MAC of a station entry to 0xFFFFFFFFFFFF
-#define RT28XX_STA_ENTRY_MAC_RESET(pAd, Wcid)					\
-	{	RT_SET_ASIC_WCID	SetAsicWcid;						\
-		SetAsicWcid.WCID = Wcid;								\
-		SetAsicWcid.SetTid = 0xffffffff;						\
-		SetAsicWcid.DeleteTid = 0xffffffff;						\
-		RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_SET_ASIC_WCID, 	\
-				&SetAsicWcid, sizeof(RT_SET_ASIC_WCID));	}
-
-// add this entry into ASIC RX WCID search table
-#define RT28XX_STA_ENTRY_ADD(pAd, pEntry)							\
-	RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_SET_CLIENT_MAC_ENTRY, 	\
-							pEntry, sizeof(MAC_TABLE_ENTRY));
-
-// add by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet
-// Set MAC register value according operation mode
-#define RT28XX_UPDATE_PROTECT(pAd)	\
- 	RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_UPDATE_PROTECT, NULL, 0);
-// end johnli
-
-// remove Pair-wise key material from ASIC
-// yet implement
-#define RT28XX_STA_ENTRY_KEY_DEL(pAd, BssIdx, Wcid)
-
-// add Client security information into ASIC WCID table and IVEIV table
-#define RT28XX_STA_SECURITY_INFO_ADD(pAd, apidx, KeyID, pEntry)						\
-	{	RT28XX_STA_ENTRY_MAC_RESET(pAd, pEntry->Aid);								\
-		if (pEntry->Aid >= 1) {														\
-			RT_SET_ASIC_WCID_ATTRI	SetAsicWcidAttri;								\
-			SetAsicWcidAttri.WCID = pEntry->Aid;									\
-			if ((pEntry->AuthMode <= Ndis802_11AuthModeAutoSwitch) &&				\
-				(pEntry->WepStatus == Ndis802_11Encryption1Enabled))				\
-			{																		\
-				SetAsicWcidAttri.Cipher = pAd->SharedKey[apidx][KeyID].CipherAlg;	\
-			}																		\
-			else if (pEntry->AuthMode == Ndis802_11AuthModeWPANone)					\
-			{																		\
-				SetAsicWcidAttri.Cipher = pAd->SharedKey[apidx][KeyID].CipherAlg;	\
-			}																		\
-			else SetAsicWcidAttri.Cipher = 0;										\
-            DBGPRINT(RT_DEBUG_TRACE, ("aid cipher = %ld\n",SetAsicWcidAttri.Cipher));       \
-			RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_SET_ASIC_WCID_CIPHER, 			\
-							&SetAsicWcidAttri, sizeof(RT_SET_ASIC_WCID_ATTRI)); } }
-
-// Insert the BA bitmap to ASIC for the Wcid entry
-#define RT28XX_ADD_BA_SESSION_TO_ASIC(_pAd, _Aid, _TID)					\
-		do{																\
-			RT_SET_ASIC_WCID	SetAsicWcid;							\
-			SetAsicWcid.WCID = (_Aid);									\
-			SetAsicWcid.SetTid = (0x10000<<(_TID));						\
-			SetAsicWcid.DeleteTid = 0xffffffff;							\
-			RTUSBEnqueueInternalCmd((_pAd), CMDTHREAD_SET_ASIC_WCID, &SetAsicWcid, sizeof(RT_SET_ASIC_WCID));	\
-		}while(0)
-
-// Remove the BA bitmap from ASIC for the Wcid entry
-#define RT28XX_DEL_BA_SESSION_FROM_ASIC(_pAd, _Wcid, _TID)				\
-		do{																\
-			RT_SET_ASIC_WCID	SetAsicWcid;							\
-			SetAsicWcid.WCID = (_Wcid);									\
-			SetAsicWcid.SetTid = (0xffffffff);							\
-			SetAsicWcid.DeleteTid = (0x10000<<(_TID) );					\
-			RTUSBEnqueueInternalCmd((_pAd), CMDTHREAD_SET_ASIC_WCID, &SetAsicWcid, sizeof(RT_SET_ASIC_WCID));	\
-		}while(0)
-
-
-/* ----------------- PCI/USB Related MACRO ----------------- */
-#define RT28XX_HANDLE_DEV_ASSIGN(handle, dev_p)			\
-	((POS_COOKIE)handle)->pUsb_Dev = dev_p;
-
-// no use
-#define RT28XX_UNMAP()
-#define RT28XX_IRQ_REQUEST(net_dev)
-#define RT28XX_IRQ_RELEASE(net_dev)
-#define RT28XX_IRQ_INIT(pAd)
-#define RT28XX_IRQ_ENABLE(pAd)
-
-
-/* ----------------- MLME Related MACRO ----------------- */
-#define RT28XX_MLME_HANDLER(pAd)			RTUSBMlmeUp(pAd)
-
-#define RT28XX_MLME_PRE_SANITY_CHECK(pAd)								\
-	{	if ((pAd->CommonCfg.bHardwareRadio == TRUE) && 					\
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) &&		\
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS))) {	\
-			RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_CHECK_GPIO, NULL, 0); } }
-
-#define RT28XX_MLME_STA_QUICK_RSP_WAKE_UP(pAd)	\
-	{	RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_QKERIODIC_EXECUT, NULL, 0);	\
-		RTUSBMlmeUp(pAd); }
-
-#define RT28XX_MLME_RESET_STATE_MACHINE(pAd)	\
-		        MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_RESET_CONF, 0, NULL);	\
-		        RTUSBMlmeUp(pAd);
-
-#define RT28XX_HANDLE_COUNTER_MEASURE(_pAd, _pEntry)		\
-	{	RTUSBEnqueueInternalCmd(_pAd, CMDTHREAD_802_11_COUNTER_MEASURE, _pEntry, sizeof(MAC_TABLE_ENTRY));	\
-		RTUSBMlmeUp(_pAd);									\
-	}
-
-
-/* ----------------- Power Save Related MACRO ----------------- */
-#define RT28XX_PS_POLL_ENQUEUE(pAd)						\
-	{	RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_PSPOLL);	\
-		RTUSBKickBulkOut(pAd); }
-
-#define RT28xx_CHIP_NAME            "RT2870"
-#define USB_CYC_CFG                 0x02a4
-#define NT_SUCCESS(status)			(((status) > 0) ? (1):(0))
-#define InterlockedIncrement 	 	atomic_inc
-#define NdisInterlockedIncrement 	atomic_inc
-#define InterlockedDecrement		atomic_dec
-#define NdisInterlockedDecrement 	atomic_dec
-#define InterlockedExchange			atomic_set
-//#define NdisMSendComplete			RTMP_SendComplete
-#define NdisMCancelTimer			RTMPCancelTimer
-#define NdisAllocMemory(_ptr, _size, _flag)	\
-									do{_ptr = kmalloc((_size),(_flag));}while(0)
-#define NdisFreeMemory(a, b, c) 	kfree((a))
-#define NdisMSleep					RTMPusecDelay		/* unit: microsecond */
-
-
-#define USBD_TRANSFER_DIRECTION_OUT		0
-#define USBD_TRANSFER_DIRECTION_IN		0
-#define USBD_SHORT_TRANSFER_OK			0
-#define PURB			purbb_t
-
-#define RTUSB_FREE_URB(pUrb)	usb_free_urb(pUrb)
-
-//#undef MlmeAllocateMemory
-//#undef MlmeFreeMemory
-
-typedef struct usb_device	* PUSB_DEV;
-
-/* MACRO for linux usb */
-typedef struct urb *purbb_t;
-typedef struct usb_ctrlrequest devctrlrequest;
-#define PIRP		PVOID
-#define PMDL		PVOID
-#define NDIS_OID	UINT
-#ifndef USB_ST_NOERROR
-#define USB_ST_NOERROR     0
-#endif
-
-// vendor-specific control operations
-#define CONTROL_TIMEOUT_JIFFIES ( (100 * HZ) / 1000)
-#define UNLINK_TIMEOUT_MS		3
-
-/* unlink urb	*/
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,7)
-#define RTUSB_UNLINK_URB(pUrb)		usb_kill_urb(pUrb)
-#else
-#define RTUSB_UNLINK_URB(pUrb)		usb_unlink_urb(pUrb)
-#endif
-
-// Prototypes of completion funuc.
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-#define RTUSBBulkOutDataPacketComplete(purb, pt_regs)    RTUSBBulkOutDataPacketComplete(purb)
-#define RTUSBBulkOutMLMEPacketComplete(pUrb, pt_regs)    RTUSBBulkOutMLMEPacketComplete(pUrb)
-#define RTUSBBulkOutNullFrameComplete(pUrb, pt_regs)     RTUSBBulkOutNullFrameComplete(pUrb)
-#define RTUSBBulkOutRTSFrameComplete(pUrb, pt_regs)      RTUSBBulkOutRTSFrameComplete(pUrb)
-#define RTUSBBulkOutPsPollComplete(pUrb, pt_regs)        RTUSBBulkOutPsPollComplete(pUrb)
-#define RTUSBBulkRxComplete(pUrb, pt_regs)               RTUSBBulkRxComplete(pUrb)
-#endif
-
-
-VOID RTUSBBulkOutDataPacketComplete(purbb_t purb, struct pt_regs *pt_regs);
-VOID RTUSBBulkOutMLMEPacketComplete(purbb_t pUrb, struct pt_regs *pt_regs);
-VOID RTUSBBulkOutNullFrameComplete(purbb_t pUrb, struct pt_regs *pt_regs);
-VOID RTUSBBulkOutRTSFrameComplete(purbb_t pUrb, struct pt_regs *pt_regs);
-VOID RTUSBBulkOutPsPollComplete(purbb_t pUrb, struct pt_regs *pt_regs);
-VOID RTUSBBulkRxComplete(purbb_t pUrb, struct pt_regs *pt_regs);
-
-
-#define RTUSBMlmeUp(pAd)	        \
-{								    \
-	POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;	\
-	if(pObj->MLMEThr_pid>0)		    \
-        up(&(pAd->mlme_semaphore)); \
-}
-
-#define RTUSBCMDUp(pAd)	                \
-{									    \
-	POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;	\
-	if(pObj->RTUSBCmdThr_pid>0)		    \
-	    up(&(pAd->RTUSBCmd_semaphore)); \
-}
-
-
-static inline NDIS_STATUS RTMPAllocateMemory(
-	OUT PVOID *ptr,
-	IN size_t size)
-{
-	*ptr = kmalloc(size, GFP_ATOMIC);
-	if(*ptr)
-		return NDIS_STATUS_SUCCESS;
-	else
-		return NDIS_STATUS_RESOURCES;
-}
-
-/* rtmp.h */
-#define	BEACON_RING_SIZE                2
-#define DEVICE_VENDOR_REQUEST_OUT       0x40
-#define DEVICE_VENDOR_REQUEST_IN        0xc0
-#define INTERFACE_VENDOR_REQUEST_OUT    0x41
-#define INTERFACE_VENDOR_REQUEST_IN     0xc1
-#define MGMTPIPEIDX						0	// EP6 is highest priority
-
-#define BULKOUT_MGMT_RESET_FLAG				0x80
-
-#define RTUSB_SET_BULK_FLAG(_M, _F)				((_M)->BulkFlags |= (_F))
-#define RTUSB_CLEAR_BULK_FLAG(_M, _F)			((_M)->BulkFlags &= ~(_F))
-#define RTUSB_TEST_BULK_FLAG(_M, _F)			(((_M)->BulkFlags & (_F)) != 0)
-
-#define EnqueueCmd(cmdq, cmdqelmt)		\
-{										\
-	if (cmdq->size == 0)				\
-		cmdq->head = cmdqelmt;			\
-	else								\
-		cmdq->tail->next = cmdqelmt;	\
-	cmdq->tail = cmdqelmt;				\
-	cmdqelmt->next = NULL;				\
-	cmdq->size++;						\
-}
-
-typedef struct   _RT_SET_ASIC_WCID {
-	ULONG WCID;          // mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based
-	ULONG SetTid;        // time-based: seconds, packet-based: kilo-packets
-	ULONG DeleteTid;        // time-based: seconds, packet-based: kilo-packets
-} RT_SET_ASIC_WCID,*PRT_SET_ASIC_WCID;
-
-typedef struct   _RT_SET_ASIC_WCID_ATTRI {
-	ULONG	WCID;          // mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based
-	ULONG	Cipher;        // ASIC Cipher definition
-	UCHAR	Addr[ETH_LENGTH_OF_ADDRESS];
-} RT_SET_ASIC_WCID_ATTRI,*PRT_SET_ASIC_WCID_ATTRI;
-
-typedef struct _MLME_MEMORY_STRUCT {
-	PVOID                           AllocVa;    //Pointer to the base virtual address of the allocated memory
-	struct _MLME_MEMORY_STRUCT      *Next;      //Pointer to the next virtual address of the allocated memory
-}   MLME_MEMORY_STRUCT, *PMLME_MEMORY_STRUCT;
-
-typedef struct  _MLME_MEMORY_HANDLER {
-	BOOLEAN                 MemRunning;         //The flag of the Mlme memory handler's status
-	UINT                    MemoryCount;        //Total nonpaged system-space memory not size
-	UINT                    InUseCount;         //Nonpaged system-space memory in used counts
-	UINT                    UnUseCount;         //Nonpaged system-space memory available counts
-	INT                    PendingCount;       //Nonpaged system-space memory for free counts
-	PMLME_MEMORY_STRUCT     pInUseHead;         //Pointer to the first nonpaed memory not used
-	PMLME_MEMORY_STRUCT     pInUseTail;         //Pointer to the last nonpaged memory not used
-	PMLME_MEMORY_STRUCT     pUnUseHead;         //Pointer to the first nonpaged memory in used
-	PMLME_MEMORY_STRUCT     pUnUseTail;         //Pointer to the last nonpaged memory in used
-	PULONG                  MemFreePending[MAX_MLME_HANDLER_MEMORY];   //an array to keep pending free-memory's pointer (32bits)
-}   MLME_MEMORY_HANDLER, *PMLME_MEMORY_HANDLER;
-
-typedef	struct _CmdQElmt	{
-	UINT				command;
-	PVOID				buffer;
-	ULONG				bufferlength;
-	BOOLEAN				CmdFromNdis;
-	BOOLEAN				SetOperation;
-	struct _CmdQElmt	*next;
-}	CmdQElmt, *PCmdQElmt;
-
-typedef	struct	_CmdQ	{
-	UINT		size;
-	CmdQElmt	*head;
-	CmdQElmt	*tail;
-	UINT32		CmdQState;
-}CmdQ, *PCmdQ;
-
-//
-// For WPA SUPPLICANT: WIRELESS EXT support wireless events: v14 or newer
-//
-#if WIRELESS_EXT >= 14
-//#define WPA_SUPPLICANT_SUPPORT  1
-#endif
-
-/* oid.h */
-// Cipher suite type for mixed mode group cipher, P802.11i-2004
-typedef enum _RT_802_11_CIPHER_SUITE_TYPE {
-	Cipher_Type_NONE,
-	Cipher_Type_WEP40,
-	Cipher_Type_TKIP,
-	Cipher_Type_RSVD,
-	Cipher_Type_CCMP,
-	Cipher_Type_WEP104
-} RT_802_11_CIPHER_SUITE_TYPE, *PRT_802_11_CIPHER_SUITE_TYPE;
-
-//CMDTHREAD_MULTI_READ_MAC
-//CMDTHREAD_MULTI_WRITE_MAC
-//CMDTHREAD_VENDOR_EEPROM_READ
-//CMDTHREAD_VENDOR_EEPROM_WRITE
-typedef	struct	_CMDHandler_TLV	{
-	USHORT		Offset;
-	USHORT		Length;
-	UCHAR		DataFirst;
-}	CMDHandler_TLV, *PCMDHandler_TLV;
-
-// New for MeetingHouse Api support
-#define CMDTHREAD_VENDOR_RESET                      0x0D730101	// cmd
-#define CMDTHREAD_VENDOR_UNPLUG                     0x0D730102	// cmd
-#define CMDTHREAD_VENDOR_SWITCH_FUNCTION            0x0D730103	// cmd
-#define CMDTHREAD_MULTI_WRITE_MAC                   0x0D730107	// cmd
-#define CMDTHREAD_MULTI_READ_MAC                    0x0D730108	// cmd
-#define CMDTHREAD_VENDOR_EEPROM_WRITE               0x0D73010A	// cmd
-#define CMDTHREAD_VENDOR_EEPROM_READ                0x0D73010B	// cmd
-#define CMDTHREAD_VENDOR_ENTER_TESTMODE             0x0D73010C	// cmd
-#define CMDTHREAD_VENDOR_EXIT_TESTMODE              0x0D73010D	// cmd
-#define CMDTHREAD_VENDOR_WRITE_BBP                  0x0D730119	// cmd
-#define CMDTHREAD_VENDOR_READ_BBP                   0x0D730118	// cmd
-#define CMDTHREAD_VENDOR_WRITE_RF                   0x0D73011A	// cmd
-#define CMDTHREAD_VENDOR_FLIP_IQ                    0x0D73011D	// cmd
-#define CMDTHREAD_RESET_BULK_OUT                    0x0D730210	// cmd
-#define CMDTHREAD_RESET_BULK_IN                     0x0D730211	// cmd
-#define CMDTHREAD_SET_PSM_BIT_SAVE                  0x0D730212	// cmd
-#define CMDTHREAD_SET_RADIO                         0x0D730214	// cmd
-#define CMDTHREAD_UPDATE_TX_RATE                    0x0D730216	// cmd
-#define CMDTHREAD_802_11_ADD_KEY_WEP                0x0D730218	// cmd
-#define CMDTHREAD_RESET_FROM_ERROR                  0x0D73021A	// cmd
-#define CMDTHREAD_LINK_DOWN                         0x0D73021B	// cmd
-#define CMDTHREAD_RESET_FROM_NDIS                   0x0D73021C	// cmd
-#define CMDTHREAD_CHECK_GPIO                        0x0D730215	// cmd
-#define CMDTHREAD_FORCE_WAKE_UP                     0x0D730222	// cmd
-#define CMDTHREAD_SET_BW                            0x0D730225	// cmd
-#define CMDTHREAD_SET_ASIC_WCID                     0x0D730226	// cmd
-#define CMDTHREAD_SET_ASIC_WCID_CIPHER              0x0D730227	// cmd
-#define CMDTHREAD_QKERIODIC_EXECUT                  0x0D73023D	// cmd
-#define RT_CMD_SET_KEY_TABLE                        0x0D730228  // cmd
-#define RT_CMD_SET_RX_WCID_TABLE                    0x0D730229  // cmd
-#define CMDTHREAD_SET_CLIENT_MAC_ENTRY              0x0D73023E	// cmd
-#define CMDTHREAD_802_11_QUERY_HARDWARE_REGISTER    0x0D710105	// cmd
-#define CMDTHREAD_802_11_SET_PHY_MODE               0x0D79010C	// cmd
-#define CMDTHREAD_802_11_SET_STA_CONFIG             0x0D790111	// cmd
-#define CMDTHREAD_802_11_SET_PREAMBLE               0x0D790101	// cmd
-#define CMDTHREAD_802_11_COUNTER_MEASURE			0x0D790102	// cmd
-// add by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet
-#define CMDTHREAD_UPDATE_PROTECT					0x0D790103	// cmd
-// end johnli
-
-#define WPA1AKMBIT	    0x01
-#define WPA2AKMBIT	    0x02
-#define WPA1PSKAKMBIT   0x04
-#define WPA2PSKAKMBIT   0x08
-#define TKIPBIT         0x01
-#define CCMPBIT         0x02
-
-
-#define RT28XX_STA_FORCE_WAKEUP(pAd, bFromTx) \
-    RT28xxUsbStaAsicForceWakeup(pAd, bFromTx);
-
-#define RT28XX_STA_SLEEP_THEN_AUTO_WAKEUP(pAd, TbttNumToNextWakeUp) \
-    RT28xxUsbStaAsicSleepThenAutoWakeup(pAd, TbttNumToNextWakeUp);
-
-#define RT28XX_MLME_RADIO_ON(pAd) \
-    RT28xxUsbMlmeRadioOn(pAd);
-
-#define RT28XX_MLME_RADIO_OFF(pAd) \
-    RT28xxUsbMlmeRadioOFF(pAd);
-
-#endif //__RT2870_H__
+#include "../rt2870/rt2870.h"
diff --git a/drivers/staging/rt3070/rt28xx.h b/drivers/staging/rt3070/rt28xx.h
index b637c4ee609..c47ddc8bd9e 100644
--- a/drivers/staging/rt3070/rt28xx.h
+++ b/drivers/staging/rt3070/rt28xx.h
@@ -1,2725 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	rt28xx.h
-
-	Abstract:
-	RT28xx ASIC related definition & structures
-
-	Revision History:
-	Who			When		  What
-	--------	----------	  ----------------------------------------------
-       Jan Lee           Jan-3-2006     created for RT2860c
-*/
-
-#ifndef	__RT28XX_H__
-#define	__RT28XX_H__
-
-
-//
-// PCI registers - base address 0x0000
-//
-#define PCI_CFG			0x0000
-#define PCI_EECTRL			0x0004
-#define PCI_MCUCTRL			0x0008
-
-#define	OPT_14			0x114
-
-typedef int				NTSTATUS;
-#define	RETRY_LIMIT             10
-#define STATUS_SUCCESS				0x00
-#define STATUS_UNSUCCESSFUL 		0x01
-
-//
-// SCH/DMA registers - base address 0x0200
-//
-// INT_SOURCE_CSR: Interrupt source register. Write one to clear corresponding bit
-//
-#define DMA_CSR0      0x200
-#define INT_SOURCE_CSR      0x200
-#ifdef RT_BIG_ENDIAN
-typedef	union	_INT_SOURCE_CSR_STRUC	{
-	struct	{
-		UINT32       	:14;
-		UINT32       	TxCoherent:1;
-		UINT32       	RxCoherent:1;
-		UINT32       	GPTimer:1;
-		UINT32       	AutoWakeup:1;//bit14
-		UINT32       	TXFifoStatusInt:1;//FIFO Statistics is full, sw should read 0x171c
-		UINT32       	PreTBTT:1;
-		UINT32       	TBTTInt:1;
-		UINT32       	RxTxCoherent:1;
-		UINT32       	MCUCommandINT:1;
-		UINT32       	MgmtDmaDone:1;
-		UINT32       	HccaDmaDone:1;
-		UINT32       	Ac3DmaDone:1;
-		UINT32       	Ac2DmaDone:1;
-		UINT32       	Ac1DmaDone:1;
-		UINT32		Ac0DmaDone:1;
-		UINT32		RxDone:1;
-		UINT32		TxDelayINT:1;	//delayed interrupt, not interrupt until several int or time limit hit
-		UINT32		RxDelayINT:1; //dealyed interrupt
-	}	field;
-	UINT32			word;
-}	INT_SOURCE_CSR_STRUC, *PINT_SOURCE_CSR_STRUC;
-#else
-typedef	union	_INT_SOURCE_CSR_STRUC	{
-	struct	{
-		UINT32		RxDelayINT:1;
-		UINT32		TxDelayINT:1;
-		UINT32		RxDone:1;
-		UINT32		Ac0DmaDone:1;//4
-		UINT32       	Ac1DmaDone:1;
-		UINT32       	Ac2DmaDone:1;
-		UINT32       	Ac3DmaDone:1;
-		UINT32       	HccaDmaDone:1; // bit7
-		UINT32       	MgmtDmaDone:1;
-		UINT32       	MCUCommandINT:1;//bit 9
-		UINT32       	RxTxCoherent:1;
-		UINT32       	TBTTInt:1;
-		UINT32       	PreTBTT:1;
-		UINT32       	TXFifoStatusInt:1;//FIFO Statistics is full, sw should read 0x171c
-		UINT32       	AutoWakeup:1;//bit14
-		UINT32       	GPTimer:1;
-		UINT32       	RxCoherent:1;//bit16
-		UINT32       	TxCoherent:1;
-		UINT32       	:14;
-	}	field;
-	UINT32			word;
-} INT_SOURCE_CSR_STRUC, *PINT_SOURCE_CSR_STRUC;
-#endif
-
-//
-// INT_MASK_CSR:   Interrupt MASK register.   1: the interrupt is mask OFF
-//
-#define INT_MASK_CSR        0x204
-#ifdef RT_BIG_ENDIAN
-typedef	union	_INT_MASK_CSR_STRUC	{
-	struct	{
-		UINT32       	TxCoherent:1;
-		UINT32       	RxCoherent:1;
-		UINT32       	:20;
-		UINT32       	MCUCommandINT:1;
-		UINT32       	MgmtDmaDone:1;
-		UINT32       	HccaDmaDone:1;
-		UINT32       	Ac3DmaDone:1;
-		UINT32       	Ac2DmaDone:1;
-		UINT32       	Ac1DmaDone:1;
-		UINT32		Ac0DmaDone:1;
-		UINT32		RxDone:1;
-		UINT32		TxDelay:1;
-		UINT32		RXDelay_INT_MSK:1;
-	}	field;
-	UINT32			word;
-}INT_MASK_CSR_STRUC, *PINT_MASK_CSR_STRUC;
-#else
-typedef	union	_INT_MASK_CSR_STRUC	{
-	struct	{
-		UINT32		RXDelay_INT_MSK:1;
-		UINT32		TxDelay:1;
-		UINT32		RxDone:1;
-		UINT32		Ac0DmaDone:1;
-		UINT32       	Ac1DmaDone:1;
-		UINT32       	Ac2DmaDone:1;
-		UINT32       	Ac3DmaDone:1;
-		UINT32       	HccaDmaDone:1;
-		UINT32       	MgmtDmaDone:1;
-		UINT32       	MCUCommandINT:1;
-		UINT32       	:20;
-		UINT32       	RxCoherent:1;
-		UINT32       	TxCoherent:1;
-	}	field;
-	UINT32			word;
-} INT_MASK_CSR_STRUC, *PINT_MASK_CSR_STRUC;
-#endif
-#define WPDMA_GLO_CFG 	0x208
-#ifdef RT_BIG_ENDIAN
-typedef	union	_WPDMA_GLO_CFG_STRUC	{
-	struct	{
-		UINT32       	HDR_SEG_LEN:16;
-		UINT32       	RXHdrScater:8;
-		UINT32       	BigEndian:1;
-		UINT32       	EnTXWriteBackDDONE:1;
-		UINT32       	WPDMABurstSIZE:2;
-		UINT32		RxDMABusy:1;
-		UINT32		EnableRxDMA:1;
-		UINT32		TxDMABusy:1;
-		UINT32		EnableTxDMA:1;
-	}	field;
-	UINT32			word;
-}WPDMA_GLO_CFG_STRUC, *PWPDMA_GLO_CFG_STRUC;
-#else
-typedef	union	_WPDMA_GLO_CFG_STRUC	{
-	struct	{
-		UINT32		EnableTxDMA:1;
-		UINT32		TxDMABusy:1;
-		UINT32		EnableRxDMA:1;
-		UINT32		RxDMABusy:1;
-		UINT32       	WPDMABurstSIZE:2;
-		UINT32       	EnTXWriteBackDDONE:1;
-		UINT32       	BigEndian:1;
-		UINT32       	RXHdrScater:8;
-		UINT32       	HDR_SEG_LEN:16;
-	}	field;
-	UINT32			word;
-} WPDMA_GLO_CFG_STRUC, *PWPDMA_GLO_CFG_STRUC;
-#endif
-#define WPDMA_RST_IDX 	0x20c
-#ifdef RT_BIG_ENDIAN
-typedef	union	_WPDMA_RST_IDX_STRUC	{
-	struct	{
-		UINT32       	:15;
-		UINT32       	RST_DRX_IDX0:1;
-		UINT32       	rsv:10;
-		UINT32       	RST_DTX_IDX5:1;
-		UINT32       	RST_DTX_IDX4:1;
-		UINT32		RST_DTX_IDX3:1;
-		UINT32		RST_DTX_IDX2:1;
-		UINT32		RST_DTX_IDX1:1;
-		UINT32		RST_DTX_IDX0:1;
-	}	field;
-	UINT32			word;
-}WPDMA_RST_IDX_STRUC, *PWPDMA_RST_IDX_STRUC;
-#else
-typedef	union	_WPDMA_RST_IDX_STRUC	{
-	struct	{
-		UINT32		RST_DTX_IDX0:1;
-		UINT32		RST_DTX_IDX1:1;
-		UINT32		RST_DTX_IDX2:1;
-		UINT32		RST_DTX_IDX3:1;
-		UINT32       	RST_DTX_IDX4:1;
-		UINT32       	RST_DTX_IDX5:1;
-		UINT32       	rsv:10;
-		UINT32       	RST_DRX_IDX0:1;
-		UINT32       	:15;
-	}	field;
-	UINT32			word;
-} WPDMA_RST_IDX_STRUC, *PWPDMA_RST_IDX_STRUC;
-#endif
-#define DELAY_INT_CFG  0x0210
-#ifdef RT_BIG_ENDIAN
-typedef	union	_DELAY_INT_CFG_STRUC	{
-	struct	{
-		UINT32       	TXDLY_INT_EN:1;
-		UINT32       	TXMAX_PINT:7;
-		UINT32       	TXMAX_PTIME:8;
-		UINT32       	RXDLY_INT_EN:1;
-		UINT32       	RXMAX_PINT:7;
-		UINT32		RXMAX_PTIME:8;
-	}	field;
-	UINT32			word;
-}DELAY_INT_CFG_STRUC, *PDELAY_INT_CFG_STRUC;
-#else
-typedef	union	_DELAY_INT_CFG_STRUC	{
-	struct	{
-		UINT32		RXMAX_PTIME:8;
-		UINT32       	RXMAX_PINT:7;
-		UINT32       	RXDLY_INT_EN:1;
-		UINT32       	TXMAX_PTIME:8;
-		UINT32       	TXMAX_PINT:7;
-		UINT32       	TXDLY_INT_EN:1;
-	}	field;
-	UINT32			word;
-} DELAY_INT_CFG_STRUC, *PDELAY_INT_CFG_STRUC;
-#endif
-#define WMM_AIFSN_CFG   0x0214
-#ifdef RT_BIG_ENDIAN
-typedef	union	_AIFSN_CSR_STRUC	{
-	struct	{
-	    UINT32   Rsv:16;
-	    UINT32   Aifsn3:4;       // for AC_VO
-	    UINT32   Aifsn2:4;       // for AC_VI
-	    UINT32   Aifsn1:4;       // for AC_BK
-	    UINT32   Aifsn0:4;       // for AC_BE
-	}	field;
-	UINT32			word;
-}	AIFSN_CSR_STRUC, *PAIFSN_CSR_STRUC;
-#else
-typedef	union	_AIFSN_CSR_STRUC	{
-	struct	{
-	    UINT32   Aifsn0:4;       // for AC_BE
-	    UINT32   Aifsn1:4;       // for AC_BK
-	    UINT32   Aifsn2:4;       // for AC_VI
-	    UINT32   Aifsn3:4;       // for AC_VO
-	    UINT32   Rsv:16;
-	}	field;
-	UINT32			word;
-}	AIFSN_CSR_STRUC, *PAIFSN_CSR_STRUC;
-#endif
-//
-// CWMIN_CSR: CWmin for each EDCA AC
-//
-#define WMM_CWMIN_CFG   0x0218
-#ifdef RT_BIG_ENDIAN
-typedef	union	_CWMIN_CSR_STRUC	{
-	struct	{
-	    UINT32   Rsv:16;
-	    UINT32   Cwmin3:4;       // for AC_VO
-	    UINT32   Cwmin2:4;       // for AC_VI
-	    UINT32   Cwmin1:4;       // for AC_BK
-	    UINT32   Cwmin0:4;       // for AC_BE
-	}	field;
-	UINT32			word;
-}	CWMIN_CSR_STRUC, *PCWMIN_CSR_STRUC;
-#else
-typedef	union	_CWMIN_CSR_STRUC	{
-	struct	{
-	    UINT32   Cwmin0:4;       // for AC_BE
-	    UINT32   Cwmin1:4;       // for AC_BK
-	    UINT32   Cwmin2:4;       // for AC_VI
-	    UINT32   Cwmin3:4;       // for AC_VO
-	    UINT32   Rsv:16;
-	}	field;
-	UINT32			word;
-}	CWMIN_CSR_STRUC, *PCWMIN_CSR_STRUC;
-#endif
-
-//
-// CWMAX_CSR: CWmin for each EDCA AC
-//
-#define WMM_CWMAX_CFG   0x021c
-#ifdef RT_BIG_ENDIAN
-typedef	union	_CWMAX_CSR_STRUC	{
-	struct	{
-	    UINT32   Rsv:16;
-	    UINT32   Cwmax3:4;       // for AC_VO
-	    UINT32   Cwmax2:4;       // for AC_VI
-	    UINT32   Cwmax1:4;       // for AC_BK
-	    UINT32   Cwmax0:4;       // for AC_BE
-	}	field;
-	UINT32			word;
-}	CWMAX_CSR_STRUC, *PCWMAX_CSR_STRUC;
-#else
-typedef	union	_CWMAX_CSR_STRUC	{
-	struct	{
-	    UINT32   Cwmax0:4;       // for AC_BE
-	    UINT32   Cwmax1:4;       // for AC_BK
-	    UINT32   Cwmax2:4;       // for AC_VI
-	    UINT32   Cwmax3:4;       // for AC_VO
-	    UINT32   Rsv:16;
-	}	field;
-	UINT32			word;
-}	CWMAX_CSR_STRUC, *PCWMAX_CSR_STRUC;
-#endif
-
-
-//
-// AC_TXOP_CSR0: AC_BK/AC_BE TXOP register
-//
-#define WMM_TXOP0_CFG    0x0220
-#ifdef RT_BIG_ENDIAN
-typedef	union	_AC_TXOP_CSR0_STRUC	{
-	struct	{
-	    USHORT  Ac1Txop;        // for AC_BE, in unit of 32us
-	    USHORT  Ac0Txop;        // for AC_BK, in unit of 32us
-	}	field;
-	UINT32			word;
-}	AC_TXOP_CSR0_STRUC, *PAC_TXOP_CSR0_STRUC;
-#else
-typedef	union	_AC_TXOP_CSR0_STRUC	{
-	struct	{
-	    USHORT  Ac0Txop;        // for AC_BK, in unit of 32us
-	    USHORT  Ac1Txop;        // for AC_BE, in unit of 32us
-	}	field;
-	UINT32			word;
-}	AC_TXOP_CSR0_STRUC, *PAC_TXOP_CSR0_STRUC;
-#endif
-
-//
-// AC_TXOP_CSR1: AC_VO/AC_VI TXOP register
-//
-#define WMM_TXOP1_CFG    0x0224
-#ifdef RT_BIG_ENDIAN
-typedef	union	_AC_TXOP_CSR1_STRUC	{
-	struct	{
-	    USHORT  Ac3Txop;        // for AC_VO, in unit of 32us
-	    USHORT  Ac2Txop;        // for AC_VI, in unit of 32us
-	}	field;
-	UINT32			word;
-}	AC_TXOP_CSR1_STRUC, *PAC_TXOP_CSR1_STRUC;
-#else
-typedef	union	_AC_TXOP_CSR1_STRUC	{
-	struct	{
-	    USHORT  Ac2Txop;        // for AC_VI, in unit of 32us
-	    USHORT  Ac3Txop;        // for AC_VO, in unit of 32us
-	}	field;
-	UINT32			word;
-}	AC_TXOP_CSR1_STRUC, *PAC_TXOP_CSR1_STRUC;
-#endif
-#define RINGREG_DIFF			0x10
-#define GPIO_CTRL_CFG    0x0228	//MAC_CSR13
-#define MCU_CMD_CFG    0x022c
-#define TX_BASE_PTR0     0x0230	//AC_BK base address
-#define TX_MAX_CNT0      0x0234
-#define TX_CTX_IDX0       0x0238
-#define TX_DTX_IDX0      0x023c
-#define TX_BASE_PTR1     0x0240 	//AC_BE base address
-#define TX_MAX_CNT1      0x0244
-#define TX_CTX_IDX1       0x0248
-#define TX_DTX_IDX1      0x024c
-#define TX_BASE_PTR2     0x0250 	//AC_VI base address
-#define TX_MAX_CNT2      0x0254
-#define TX_CTX_IDX2       0x0258
-#define TX_DTX_IDX2      0x025c
-#define TX_BASE_PTR3     0x0260 	//AC_VO base address
-#define TX_MAX_CNT3      0x0264
-#define TX_CTX_IDX3       0x0268
-#define TX_DTX_IDX3      0x026c
-#define TX_BASE_PTR4     0x0270 	//HCCA base address
-#define TX_MAX_CNT4      0x0274
-#define TX_CTX_IDX4       0x0278
-#define TX_DTX_IDX4      0x027c
-#define TX_BASE_PTR5     0x0280 	//MGMT base address
-#define  TX_MAX_CNT5     0x0284
-#define TX_CTX_IDX5       0x0288
-#define TX_DTX_IDX5      0x028c
-#define TX_MGMTMAX_CNT      TX_MAX_CNT5
-#define TX_MGMTCTX_IDX       TX_CTX_IDX5
-#define TX_MGMTDTX_IDX      TX_DTX_IDX5
-#define RX_BASE_PTR     0x0290 	//RX base address
-#define RX_MAX_CNT      0x0294
-#define RX_CRX_IDX       0x0298
-#define RX_DRX_IDX      0x029c
-#define USB_DMA_CFG      0x02a0
-#ifdef RT_BIG_ENDIAN
-typedef	union	_USB_DMA_CFG_STRUC	{
-	struct	{
-	    UINT32  TxBusy:1;   	//USB DMA TX FSM busy . debug only
-	    UINT32  RxBusy:1;        //USB DMA RX FSM busy . debug only
-	    UINT32  EpoutValid:6;        //OUT endpoint data valid. debug only
-	    UINT32  TxBulkEn:1;        //Enable USB DMA Tx
-	    UINT32  RxBulkEn:1;        //Enable USB DMA Rx
-	    UINT32  RxBulkAggEn:1;        //Enable Rx Bulk Aggregation
-	    UINT32  TxopHalt:1;        //Halt TXOP count down when TX buffer is full.
-	    UINT32  TxClear:1;        //Clear USB DMA TX path
-	    UINT32  rsv:2;
-	    UINT32  phyclear:1;        		//phy watch dog enable. write 1
-	    UINT32  RxBulkAggLmt:8;        //Rx Bulk Aggregation Limit  in unit of 1024 bytes
-	    UINT32  RxBulkAggTOut:8;        //Rx Bulk Aggregation TimeOut  in unit of 33ns
-	}	field;
-	UINT32			word;
-}	USB_DMA_CFG_STRUC, *PUSB_DMA_CFG_STRUC;
-#else
-typedef	union	_USB_DMA_CFG_STRUC	{
-	struct	{
-	    UINT32  RxBulkAggTOut:8;        //Rx Bulk Aggregation TimeOut  in unit of 33ns
-	    UINT32  RxBulkAggLmt:8;        //Rx Bulk Aggregation Limit  in unit of 256 bytes
-	    UINT32  phyclear:1;        		//phy watch dog enable. write 1
-	    UINT32  rsv:2;
-	    UINT32  TxClear:1;        //Clear USB DMA TX path
-	    UINT32  TxopHalt:1;        //Halt TXOP count down when TX buffer is full.
-	    UINT32  RxBulkAggEn:1;        //Enable Rx Bulk Aggregation
-	    UINT32  RxBulkEn:1;        //Enable USB DMA Rx
-	    UINT32  TxBulkEn:1;        //Enable USB DMA Tx
-	    UINT32  EpoutValid:6;        //OUT endpoint data valid
-	    UINT32  RxBusy:1;        //USB DMA RX FSM busy
-	    UINT32  TxBusy:1;   	//USB DMA TX FSM busy
-	}	field;
-	UINT32			word;
-}	USB_DMA_CFG_STRUC, *PUSB_DMA_CFG_STRUC;
-#endif
-
-//
-//  3  PBF  registers
-//
-//
-// Most are for debug. Driver doesn't touch PBF register.
-#define 	PBF_SYS_CTRL 	 0x0400
-#define     PBF_CFG                 0x0408
-#define 	PBF_MAX_PCNT 	 0x040C
-#define 	PBF_CTRL	 	0x0410
-#define 	PBF_INT_STA	 0x0414
-#define 	PBF_INT_ENA	 0x0418
-#define 	TXRXQ_PCNT  	 0x0438
-#define 	PBF_DBG 	 	 0x043c
-#define     PBF_CAP_CTRL     0x0440
-
-
-// eFuse registers
-#define EFUSE_CTRL              0x0580
-#define EFUSE_DATA0             0x0590
-#define EFUSE_DATA1             0x0594
-#define EFUSE_DATA2             0x0598
-#define EFUSE_DATA3             0x059c
-#define EFUSE_USAGE_MAP_START   0x2d0
-#define EFUSE_USAGE_MAP_END     0x2fc
-#define EFUSE_TAG               0x2fe
-#define EFUSE_USAGE_MAP_SIZE    45
-
-#ifdef RT_BIG_ENDIAN
-typedef	union	_EFUSE_CTRL_STRUC {
-	struct	{
-		UINT32            SEL_EFUSE:1;
-		UINT32            EFSROM_KICK:1;
-		UINT32            RESERVED:4;
-		UINT32            EFSROM_AIN:10;
-		UINT32            EFSROM_LDO_ON_TIME:2;
-		UINT32            EFSROM_LDO_OFF_TIME:6;
-		UINT32            EFSROM_MODE:2;
-		UINT32            EFSROM_AOUT:6;
-	}	field;
-	UINT32			word;
-}	EFUSE_CTRL_STRUC, *PEFUSE_CTRL_STRUC;
-#else
-typedef	union	_EFUSE_CTRL_STRUC {
-	struct	{
-		UINT32            EFSROM_AOUT:6;
-		UINT32            EFSROM_MODE:2;
-		UINT32            EFSROM_LDO_OFF_TIME:6;
-		UINT32            EFSROM_LDO_ON_TIME:2;
-		UINT32            EFSROM_AIN:10;
-		UINT32            RESERVED:4;
-		UINT32            EFSROM_KICK:1;
-		UINT32            SEL_EFUSE:1;
-	}	field;
-	UINT32			word;
-}	EFUSE_CTRL_STRUC, *PEFUSE_CTRL_STRUC;
-#endif // RT_BIG_ENDIAN //
-
-#define LDO_CFG0 				0x05d4
-#define GPIO_SWITCH				0x05dc
-
-//
-//  4  MAC  registers
-//
-//
-//  4.1 MAC SYSTEM  configuration registers (offset:0x1000)
-//
-#define MAC_CSR0            0x1000
-#ifdef RT_BIG_ENDIAN
-typedef	union	_ASIC_VER_ID_STRUC	{
-	struct	{
-	    USHORT  ASICVer;        // version : 2860
-	    USHORT  ASICRev;        // reversion  : 0
-	}	field;
-	UINT32			word;
-}	ASIC_VER_ID_STRUC, *PASIC_VER_ID_STRUC;
-#else
-typedef	union	_ASIC_VER_ID_STRUC	{
-	struct	{
-	    USHORT  ASICRev;        // reversion  : 0
-	    USHORT  ASICVer;        // version : 2860
-	}	field;
-	UINT32			word;
-}	ASIC_VER_ID_STRUC, *PASIC_VER_ID_STRUC;
-#endif
-#define MAC_SYS_CTRL            0x1004		//MAC_CSR1
-#define MAC_ADDR_DW0            		0x1008		// MAC ADDR DW0
-#define MAC_ADDR_DW1           		 0x100c		// MAC ADDR DW1
-//
-// MAC_CSR2: STA MAC register 0
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_MAC_DW0_STRUC	{
-	struct	{
-		UCHAR		Byte3;		// MAC address byte 3
-		UCHAR		Byte2;		// MAC address byte 2
-		UCHAR		Byte1;		// MAC address byte 1
-		UCHAR		Byte0;		// MAC address byte 0
-	}	field;
-	UINT32			word;
-}	MAC_DW0_STRUC, *PMAC_DW0_STRUC;
-#else
-typedef	union	_MAC_DW0_STRUC	{
-	struct	{
-		UCHAR		Byte0;		// MAC address byte 0
-		UCHAR		Byte1;		// MAC address byte 1
-		UCHAR		Byte2;		// MAC address byte 2
-		UCHAR		Byte3;		// MAC address byte 3
-	}	field;
-	UINT32			word;
-}	MAC_DW0_STRUC, *PMAC_DW0_STRUC;
-#endif
-
-//
-// MAC_CSR3: STA MAC register 1
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_MAC_DW1_STRUC	{
-	struct	{
-		UCHAR		Rsvd1;
-		UCHAR		U2MeMask;
-		UCHAR		Byte5;		// MAC address byte 5
-		UCHAR		Byte4;		// MAC address byte 4
-	}	field;
-	UINT32			word;
-}	MAC_DW1_STRUC, *PMAC_DW1_STRUC;
-#else
-typedef	union	_MAC_DW1_STRUC	{
-	struct	{
-		UCHAR		Byte4;		// MAC address byte 4
-		UCHAR		Byte5;		// MAC address byte 5
-		UCHAR		U2MeMask;
-		UCHAR		Rsvd1;
-	}	field;
-	UINT32			word;
-}	MAC_DW1_STRUC, *PMAC_DW1_STRUC;
-#endif
-
-#define MAC_BSSID_DW0            		0x1010		// MAC BSSID DW0
-#define MAC_BSSID_DW1            		0x1014		// MAC BSSID DW1
-
-//
-// MAC_CSR5: BSSID register 1
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_MAC_CSR5_STRUC	{
-	struct	{
-		USHORT		Rsvd:11;
-		USHORT		MBssBcnNum:3;
-		USHORT		BssIdMode:2; // 0: one BSSID, 10: 4 BSSID,  01: 2 BSSID , 11: 8BSSID
-		UCHAR		Byte5;		 // BSSID byte 5
-		UCHAR		Byte4;		 // BSSID byte 4
-	}	field;
-	UINT32			word;
-}	MAC_CSR5_STRUC, *PMAC_CSR5_STRUC;
-#else
-typedef	union	_MAC_CSR5_STRUC	{
-	struct	{
-		UCHAR		Byte4;		 // BSSID byte 4
-		UCHAR		Byte5;		 // BSSID byte 5
-		USHORT      	BssIdMask:2; // 0: one BSSID, 10: 4 BSSID,  01: 2 BSSID , 11: 8BSSID
-		USHORT		MBssBcnNum:3;
-		USHORT		Rsvd:11;
-	}	field;
-	UINT32			word;
-}	MAC_CSR5_STRUC, *PMAC_CSR5_STRUC;
-#endif
-
-#define MAX_LEN_CFG              0x1018		// rt2860b max 16k bytes. bit12:13 Maximum PSDU length (power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16
-#define BBP_CSR_CFG            		0x101c		//
-//
-// BBP_CSR_CFG: BBP serial control register
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_BBP_CSR_CFG_STRUC	{
-	struct	{
-		UINT32		:12;
-		UINT32		BBP_RW_MODE:1;		// 0: use serial mode  1:parallel
-		UINT32		BBP_PAR_DUR:1;		    // 0: 4 MAC clock cycles  1: 8 MAC clock cycles
-		UINT32		Busy:1;				// 1: ASIC is busy execute BBP programming.
-		UINT32		fRead:1;		    // 0: Write	BBP, 1:	Read BBP
-		UINT32		RegNum:8;			// Selected	BBP	register
-		UINT32		Value:8;			// Register	value to program into BBP
-	}	field;
-	UINT32			word;
-}	BBP_CSR_CFG_STRUC, *PBBP_CSR_CFG_STRUC;
-#else
-typedef	union	_BBP_CSR_CFG_STRUC	{
-	struct	{
-		UINT32		Value:8;			// Register	value to program into BBP
-		UINT32		RegNum:8;			// Selected	BBP	register
-		UINT32		fRead:1;		    // 0: Write	BBP, 1:	Read BBP
-		UINT32		Busy:1;				// 1: ASIC is busy execute BBP programming.
-		UINT32		BBP_PAR_DUR:1;		     // 0: 4 MAC clock cycles  1: 8 MAC clock cycles
-		UINT32		BBP_RW_MODE:1;		// 0: use serial mode  1:parallel
-		UINT32		:12;
-	}	field;
-	UINT32			word;
-}	BBP_CSR_CFG_STRUC, *PBBP_CSR_CFG_STRUC;
-#endif
-#define RF_CSR_CFG0            		0x1020
-//
-// RF_CSR_CFG: RF control register
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_RF_CSR_CFG0_STRUC	{
-	struct	{
-		UINT32		Busy:1;		    // 0: idle 1: 8busy
-		UINT32		Sel:1;				// 0:RF_LE0 activate  1:RF_LE1 activate
-		UINT32		StandbyMode:1;		    // 0: high when stand by 1:	low when standby
-		UINT32		bitwidth:5;			// Selected	BBP	register
-		UINT32		RegIdAndContent:24;			// Register	value to program into BBP
-	}	field;
-	UINT32			word;
-}	RF_CSR_CFG0_STRUC, *PRF_CSR_CFG0_STRUC;
-#else
-typedef	union	_RF_CSR_CFG0_STRUC	{
-	struct	{
-		UINT32		RegIdAndContent:24;			// Register	value to program into BBP
-		UINT32		bitwidth:5;			// Selected	BBP	register
-		UINT32		StandbyMode:1;		    // 0: high when stand by 1:	low when standby
-		UINT32		Sel:1;				// 0:RF_LE0 activate  1:RF_LE1 activate
-		UINT32		Busy:1;		    // 0: idle 1: 8busy
-	}	field;
-	UINT32			word;
-}	RF_CSR_CFG0_STRUC, *PRF_CSR_CFG0_STRUC;
-#endif
-#define RF_CSR_CFG1           		0x1024
-#ifdef RT_BIG_ENDIAN
-typedef	union	_RF_CSR_CFG1_STRUC	{
-	struct	{
-		UINT32		rsv:7;		    // 0: idle 1: 8busy
-		UINT32		RFGap:5;			// Gap between BB_CONTROL_RF and RF_LE. 0: 3 system clock cycle (37.5usec) 1: 5 system clock cycle (62.5usec)
-		UINT32		RegIdAndContent:24;			// Register	value to program into BBP
-	}	field;
-	UINT32			word;
-}	RF_CSR_CFG1_STRUC, *PRF_CSR_CFG1_STRUC;
-#else
-typedef	union	_RF_CSR_CFG1_STRUC	{
-	struct	{
-		UINT32		RegIdAndContent:24;			// Register	value to program into BBP
-		UINT32		RFGap:5;			// Gap between BB_CONTROL_RF and RF_LE. 0: 3 system clock cycle (37.5usec) 1: 5 system clock cycle (62.5usec)
-		UINT32		rsv:7;		    // 0: idle 1: 8busy
-	}	field;
-	UINT32			word;
-}	RF_CSR_CFG1_STRUC, *PRF_CSR_CFG1_STRUC;
-#endif
-#define RF_CSR_CFG2           		0x1028		//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_RF_CSR_CFG2_STRUC	{
-	struct	{
-		UINT32		rsv:8;		    // 0: idle 1: 8busy
-		UINT32		RegIdAndContent:24;			// Register	value to program into BBP
-	}	field;
-	UINT32			word;
-}	RF_CSR_CFG2_STRUC, *PRF_CSR_CFG2_STRUC;
-#else
-typedef	union	_RF_CSR_CFG2_STRUC	{
-	struct	{
-		UINT32		RegIdAndContent:24;			// Register	value to program into BBP
-		UINT32		rsv:8;		    // 0: idle 1: 8busy
-	}	field;
-	UINT32			word;
-}	RF_CSR_CFG2_STRUC, *PRF_CSR_CFG2_STRUC;
-#endif
-#define LED_CFG           		0x102c		//  MAC_CSR14
-#ifdef RT_BIG_ENDIAN
-typedef	union	_LED_CFG_STRUC	{
-	struct	{
-		UINT32		:1;
-		UINT32		LedPolar:1;			// Led Polarity.  0: active low1: active high
-		UINT32		YLedMode:2;			// yellow Led Mode
-		UINT32		GLedMode:2;			// green Led Mode
-		UINT32		RLedMode:2;			// red Led Mode    0: off1: blinking upon TX2: periodic slow blinking3: always on
-		UINT32		rsv:2;
-		UINT32		SlowBlinkPeriod:6;			// slow blinking period. unit:1ms
-		UINT32		OffPeriod:8;			// blinking off period unit 1ms
-		UINT32		OnPeriod:8;			// blinking on period unit 1ms
-	}	field;
-	UINT32			word;
-}	LED_CFG_STRUC, *PLED_CFG_STRUC;
-#else
-typedef	union	_LED_CFG_STRUC	{
-	struct	{
-		UINT32		OnPeriod:8;			// blinking on period unit 1ms
-		UINT32		OffPeriod:8;			// blinking off period unit 1ms
-		UINT32		SlowBlinkPeriod:6;			// slow blinking period. unit:1ms
-		UINT32		rsv:2;
-		UINT32		RLedMode:2;			// red Led Mode    0: off1: blinking upon TX2: periodic slow blinking3: always on
-		UINT32		GLedMode:2;			// green Led Mode
-		UINT32		YLedMode:2;			// yellow Led Mode
-		UINT32		LedPolar:1;			// Led Polarity.  0: active low1: active high
-		UINT32		:1;
-	}	field;
-	UINT32			word;
-}	LED_CFG_STRUC, *PLED_CFG_STRUC;
-#endif
-//
-//  4.2 MAC TIMING  configuration registers (offset:0x1100)
-//
-#define XIFS_TIME_CFG             0x1100		 // MAC_CSR8  MAC_CSR9
-#ifdef RT_BIG_ENDIAN
-typedef	union	_IFS_SLOT_CFG_STRUC	{
-	struct	{
-	    UINT32  rsv:2;
-	    UINT32  BBRxendEnable:1;        //  reference RXEND signal to begin XIFS defer
-	    UINT32  EIFS:9;        //  unit 1us
-	    UINT32  OfdmXifsTime:4;        //OFDM SIFS. unit 1us. Applied after OFDM RX when MAC doesn't reference BBP signal BBRXEND
-	    UINT32  OfdmSifsTime:8;        //  unit 1us. Applied after OFDM RX/TX
-	    UINT32  CckmSifsTime:8;        //  unit 1us. Applied after CCK RX/TX
-	}	field;
-	UINT32			word;
-}	IFS_SLOT_CFG_STRUC, *PIFS_SLOT_CFG_STRUC;
-#else
-typedef	union	_IFS_SLOT_CFG_STRUC	{
-	struct	{
-	    UINT32  CckmSifsTime:8;        //  unit 1us. Applied after CCK RX/TX
-	    UINT32  OfdmSifsTime:8;        //  unit 1us. Applied after OFDM RX/TX
-	    UINT32  OfdmXifsTime:4;        //OFDM SIFS. unit 1us. Applied after OFDM RX when MAC doesn't reference BBP signal BBRXEND
-	    UINT32  EIFS:9;        //  unit 1us
-	    UINT32  BBRxendEnable:1;        //  reference RXEND signal to begin XIFS defer
-	    UINT32  rsv:2;
-	}	field;
-	UINT32			word;
-}	IFS_SLOT_CFG_STRUC, *PIFS_SLOT_CFG_STRUC;
-#endif
-
-#define BKOFF_SLOT_CFG             0x1104		 //  mac_csr9 last 8 bits
-#define NAV_TIME_CFG             0x1108		 // NAV  (MAC_CSR15)
-#define CH_TIME_CFG             0x110C		 	// Count as channel busy
-#define PBF_LIFE_TIMER             0x1110		 //TX/RX MPDU timestamp timer (free run)Unit: 1us
-#define BCN_TIME_CFG             0x1114		 // TXRX_CSR9
-
-#define BCN_OFFSET0				0x042C
-#define BCN_OFFSET1				0x0430
-
-//
-// BCN_TIME_CFG : Synchronization control register
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_BCN_TIME_CFG_STRUC	{
-	struct	{
-		UINT32		TxTimestampCompensate:8;
-        UINT32       :3;
-		UINT32		bBeaconGen:1;		// Enable beacon generator
-        UINT32       bTBTTEnable:1;
-		UINT32		TsfSyncMode:2;		// Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode
-		UINT32		bTsfTicking:1;		// Enable TSF auto counting
-		UINT32       BeaconInterval:16;  // in unit of 1/16 TU
-	}	field;
-	UINT32			word;
-}	BCN_TIME_CFG_STRUC, *PBCN_TIME_CFG_STRUC;
-#else
-typedef	union	_BCN_TIME_CFG_STRUC	{
-	struct	{
-		UINT32       BeaconInterval:16;  // in unit of 1/16 TU
-		UINT32		bTsfTicking:1;		// Enable TSF auto counting
-		UINT32		TsfSyncMode:2;		// Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode
-        UINT32       bTBTTEnable:1;
-		UINT32		bBeaconGen:1;		// Enable beacon generator
-        UINT32       :3;
-		UINT32		TxTimestampCompensate:8;
-	}	field;
-	UINT32			word;
-}	BCN_TIME_CFG_STRUC, *PBCN_TIME_CFG_STRUC;
-#endif
-#define TBTT_SYNC_CFG            0x1118  		// txrx_csr10
-#define TSF_TIMER_DW0             0x111C  		// Local TSF timer lsb 32 bits. Read-only
-#define TSF_TIMER_DW1             0x1120  		// msb 32 bits. Read-only.
-#define TBTT_TIMER             	0x1124  		// TImer remains till next TBTT. Read-only.  TXRX_CSR14
-#define INT_TIMER_CFG              	0x1128  		//
-#define INT_TIMER_EN             	0x112c  		//  GP-timer and pre-tbtt Int enable
-#define CH_IDLE_STA              	0x1130  		//  channel idle time
-#define CH_BUSY_STA              	0x1134  		//  channle busy time
-//
-//  4.2 MAC POWER  configuration registers (offset:0x1200)
-//
-#define MAC_STATUS_CFG             0x1200		 // old MAC_CSR12
-#define PWR_PIN_CFG             0x1204		 // old MAC_CSR12
-#define AUTO_WAKEUP_CFG             0x1208		 // old MAC_CSR10
-//
-// AUTO_WAKEUP_CFG: Manual power control / status register
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_AUTO_WAKEUP_STRUC	{
-	struct	{
-		UINT32		:16;
-		UINT32		EnableAutoWakeup:1;	// 0:sleep, 1:awake
-		UINT32       NumofSleepingTbtt:7;          // ForceWake has high privilege than PutToSleep when both set
-		UINT32       AutoLeadTime:8;
-	}	field;
-	UINT32			word;
-}	AUTO_WAKEUP_STRUC, *PAUTO_WAKEUP_STRUC;
-#else
-typedef	union	_AUTO_WAKEUP_STRUC	{
-	struct	{
-		UINT32       AutoLeadTime:8;
-		UINT32       NumofSleepingTbtt:7;          // ForceWake has high privilege than PutToSleep when both set
-		UINT32		EnableAutoWakeup:1;	// 0:sleep, 1:awake
-		UINT32		:16;
-	}	field;
-	UINT32			word;
-}	AUTO_WAKEUP_STRUC, *PAUTO_WAKEUP_STRUC;
-#endif
-//
-//  4.3 MAC TX  configuration registers (offset:0x1300)
-//
-
-#define EDCA_AC0_CFG	0x1300		//AC_TXOP_CSR0 0x3474
-#define EDCA_AC1_CFG	0x1304
-#define EDCA_AC2_CFG	0x1308
-#define EDCA_AC3_CFG	0x130c
-#ifdef RT_BIG_ENDIAN
-typedef	union	_EDCA_AC_CFG_STRUC	{
-	struct	{
-	    UINT32  :12;        //
-	    UINT32  Cwmax:4;        //unit power of 2
-	    UINT32  Cwmin:4;        //
-	    UINT32  Aifsn:4;        // # of slot time
-	    UINT32  AcTxop:8;        //  in unit of 32us
-	}	field;
-	UINT32			word;
-}	EDCA_AC_CFG_STRUC, *PEDCA_AC_CFG_STRUC;
-#else
-typedef	union	_EDCA_AC_CFG_STRUC	{
-	struct	{
-	    UINT32  AcTxop:8;        //  in unit of 32us
-	    UINT32  Aifsn:4;        // # of slot time
-	    UINT32  Cwmin:4;        //
-	    UINT32  Cwmax:4;        //unit power of 2
-	    UINT32  :12;       //
-	}	field;
-	UINT32			word;
-}	EDCA_AC_CFG_STRUC, *PEDCA_AC_CFG_STRUC;
-#endif
-
-#define EDCA_TID_AC_MAP	0x1310
-#define TX_PWR_CFG_0	0x1314
-#define TX_PWR_CFG_1	0x1318
-#define TX_PWR_CFG_2	0x131C
-#define TX_PWR_CFG_3	0x1320
-#define TX_PWR_CFG_4	0x1324
-#define TX_PIN_CFG		0x1328
-#define TX_BAND_CFG	0x132c		// 0x1 use upper 20MHz. 0 juse lower 20MHz
-#define TX_SW_CFG0		0x1330
-#define TX_SW_CFG1		0x1334
-#define TX_SW_CFG2		0x1338
-#define TXOP_THRES_CFG		0x133c
-#define TXOP_CTRL_CFG		0x1340
-#define TX_RTS_CFG		0x1344
-
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_RTS_CFG_STRUC	{
-	struct	{
-	    UINT32       rsv:7;
-	    UINT32       RtsFbkEn:1;    // enable rts rate fallback
-	    UINT32       RtsThres:16;    // unit:byte
-	    UINT32       AutoRtsRetryLimit:8;
-	}	field;
-	UINT32			word;
-}	TX_RTS_CFG_STRUC, *PTX_RTS_CFG_STRUC;
-#else
-typedef	union	_TX_RTS_CFG_STRUC	{
-	struct	{
-	    UINT32       AutoRtsRetryLimit:8;
-	    UINT32       RtsThres:16;    // unit:byte
-	    UINT32       RtsFbkEn:1;    // enable rts rate fallback
-	    UINT32       rsv:7;     // 1: HT non-STBC control frame enable
-	}	field;
-	UINT32			word;
-}	TX_RTS_CFG_STRUC, *PTX_RTS_CFG_STRUC;
-#endif
-#define TX_TIMEOUT_CFG	0x1348
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_TIMEOUT_CFG_STRUC	{
-	struct	{
-	    UINT32       rsv2:8;
-	    UINT32       TxopTimeout:8;	//TXOP timeout value for TXOP truncation.  It is recommended that (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT)
-	    UINT32       RxAckTimeout:8;	// unit:slot. Used for TX precedure
-	    UINT32       MpduLifeTime:4;    //  expiration time = 2^(9+MPDU LIFE TIME)  us
-	    UINT32       rsv:4;
-	}	field;
-	UINT32			word;
-}	TX_TIMEOUT_CFG_STRUC, *PTX_TIMEOUT_CFG_STRUC;
-#else
-typedef	union	_TX_TIMEOUT_CFG_STRUC	{
-	struct	{
-	    UINT32       rsv:4;
-	    UINT32       MpduLifeTime:4;    //  expiration time = 2^(9+MPDU LIFE TIME)  us
-	    UINT32       RxAckTimeout:8;	// unit:slot. Used for TX precedure
-	    UINT32       TxopTimeout:8;	//TXOP timeout value for TXOP truncation.  It is recommended that (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT)
-	    UINT32       rsv2:8;     // 1: HT non-STBC control frame enable
-	}	field;
-	UINT32			word;
-}	TX_TIMEOUT_CFG_STRUC, *PTX_TIMEOUT_CFG_STRUC;
-#endif
-#define TX_RTY_CFG	0x134c
-#ifdef RT_BIG_ENDIAN
-typedef	union PACKED _TX_RTY_CFG_STRUC	{
-	struct	{
-	    UINT32       rsv:1;
-	    UINT32       TxautoFBEnable:1;    // Tx retry PHY rate auto fallback enable
-	    UINT32       AggRtyMode:1;	// Aggregate MPDU retry mode.  0:expired by retry limit, 1: expired by mpdu life timer
-	    UINT32       NonAggRtyMode:1;	// Non-Aggregate MPDU retry mode.  0:expired by retry limit, 1: expired by mpdu life timer
-	    UINT32       LongRtyThre:12;	// Long retry threshoold
-	    UINT32       LongRtyLimit:8;	//long retry limit
-	    UINT32       ShortRtyLimit:8;	//  short retry limit
-
-	}	field;
-	UINT32			word;
-}	TX_RTY_CFG_STRUC, *PTX_RTY_CFG_STRUC;
-#else
-typedef	union PACKED _TX_RTY_CFG_STRUC	{
-	struct	{
-	    UINT32       ShortRtyLimit:8;	//  short retry limit
-	    UINT32       LongRtyLimit:8;	//long retry limit
-	    UINT32       LongRtyThre:12;	// Long retry threshoold
-	    UINT32       NonAggRtyMode:1;	// Non-Aggregate MPDU retry mode.  0:expired by retry limit, 1: expired by mpdu life timer
-	    UINT32       AggRtyMode:1;	// Aggregate MPDU retry mode.  0:expired by retry limit, 1: expired by mpdu life timer
-	    UINT32       TxautoFBEnable:1;    // Tx retry PHY rate auto fallback enable
-	    UINT32       rsv:1;     // 1: HT non-STBC control frame enable
-	}	field;
-	UINT32			word;
-}	TX_RTY_CFG_STRUC, *PTX_RTY_CFG_STRUC;
-#endif
-#define TX_LINK_CFG	0x1350
-#ifdef RT_BIG_ENDIAN
-typedef	union	PACKED _TX_LINK_CFG_STRUC	{
-	struct PACKED {
-	    UINT32       RemotMFS:8;	//remote MCS feedback sequence number
-	    UINT32       RemotMFB:8;    //  remote MCS feedback
-	    UINT32       rsv:3;	//
-	    UINT32       TxCFAckEn:1;	//   Piggyback CF-ACK enable
-	    UINT32       TxRDGEn:1;	// RDG TX enable
-	    UINT32       TxMRQEn:1;	//  MCS request TX enable
-	    UINT32       RemoteUMFSEnable:1;	//  remote unsolicit  MFB enable.  0: not apply remote remote unsolicit (MFS=7)
-	    UINT32       MFBEnable:1;	//  TX apply remote MFB 1:enable
-	    UINT32       RemoteMFBLifeTime:8;	//remote MFB life time. unit : 32us
-	}	field;
-	UINT32			word;
-}	TX_LINK_CFG_STRUC, *PTX_LINK_CFG_STRUC;
-#else
-typedef	union	PACKED _TX_LINK_CFG_STRUC	{
-	struct PACKED {
-	    UINT32       RemoteMFBLifeTime:8;	//remote MFB life time. unit : 32us
-	    UINT32       MFBEnable:1;	//  TX apply remote MFB 1:enable
-	    UINT32       RemoteUMFSEnable:1;	//  remote unsolicit  MFB enable.  0: not apply remote remote unsolicit (MFS=7)
-	    UINT32       TxMRQEn:1;	//  MCS request TX enable
-	    UINT32       TxRDGEn:1;	// RDG TX enable
-	    UINT32       TxCFAckEn:1;	//   Piggyback CF-ACK enable
-	    UINT32       rsv:3;	//
-	    UINT32       RemotMFB:8;    //  remote MCS feedback
-	    UINT32       RemotMFS:8;	//remote MCS feedback sequence number
-	}	field;
-	UINT32			word;
-}	TX_LINK_CFG_STRUC, *PTX_LINK_CFG_STRUC;
-#endif
-#define HT_FBK_CFG0	0x1354
-#ifdef RT_BIG_ENDIAN
-typedef	union PACKED _HT_FBK_CFG0_STRUC	{
-	struct	{
-	    UINT32       HTMCS7FBK:4;
-	    UINT32       HTMCS6FBK:4;
-	    UINT32       HTMCS5FBK:4;
-	    UINT32       HTMCS4FBK:4;
-	    UINT32       HTMCS3FBK:4;
-	    UINT32       HTMCS2FBK:4;
-	    UINT32       HTMCS1FBK:4;
-	    UINT32       HTMCS0FBK:4;
-	}	field;
-	UINT32			word;
-}	HT_FBK_CFG0_STRUC, *PHT_FBK_CFG0_STRUC;
-#else
-typedef	union PACKED _HT_FBK_CFG0_STRUC	{
-	struct	{
-	    UINT32       HTMCS0FBK:4;
-	    UINT32       HTMCS1FBK:4;
-	    UINT32       HTMCS2FBK:4;
-	    UINT32       HTMCS3FBK:4;
-	    UINT32       HTMCS4FBK:4;
-	    UINT32       HTMCS5FBK:4;
-	    UINT32       HTMCS6FBK:4;
-	    UINT32       HTMCS7FBK:4;
-	}	field;
-	UINT32			word;
-}	HT_FBK_CFG0_STRUC, *PHT_FBK_CFG0_STRUC;
-#endif
-#define HT_FBK_CFG1	0x1358
-#ifdef RT_BIG_ENDIAN
-typedef	union	_HT_FBK_CFG1_STRUC	{
-	struct	{
-	    UINT32       HTMCS15FBK:4;
-	    UINT32       HTMCS14FBK:4;
-	    UINT32       HTMCS13FBK:4;
-	    UINT32       HTMCS12FBK:4;
-	    UINT32       HTMCS11FBK:4;
-	    UINT32       HTMCS10FBK:4;
-	    UINT32       HTMCS9FBK:4;
-	    UINT32       HTMCS8FBK:4;
-	}	field;
-	UINT32			word;
-}	HT_FBK_CFG1_STRUC, *PHT_FBK_CFG1_STRUC;
-#else
-typedef	union	_HT_FBK_CFG1_STRUC	{
-	struct	{
-	    UINT32       HTMCS8FBK:4;
-	    UINT32       HTMCS9FBK:4;
-	    UINT32       HTMCS10FBK:4;
-	    UINT32       HTMCS11FBK:4;
-	    UINT32       HTMCS12FBK:4;
-	    UINT32       HTMCS13FBK:4;
-	    UINT32       HTMCS14FBK:4;
-	    UINT32       HTMCS15FBK:4;
-	}	field;
-	UINT32			word;
-}	HT_FBK_CFG1_STRUC, *PHT_FBK_CFG1_STRUC;
-#endif
-#define LG_FBK_CFG0	0x135c
-#ifdef RT_BIG_ENDIAN
-typedef	union	_LG_FBK_CFG0_STRUC	{
-	struct	{
-	    UINT32       OFDMMCS7FBK:4;	//initial value is 6
-	    UINT32       OFDMMCS6FBK:4;	//initial value is 5
-	    UINT32       OFDMMCS5FBK:4;	//initial value is 4
-	    UINT32       OFDMMCS4FBK:4;	//initial value is 3
-	    UINT32       OFDMMCS3FBK:4;	//initial value is 2
-	    UINT32       OFDMMCS2FBK:4;	//initial value is 1
-	    UINT32       OFDMMCS1FBK:4;	//initial value is 0
-	    UINT32       OFDMMCS0FBK:4;	//initial value is 0
-	}	field;
-	UINT32			word;
-}	LG_FBK_CFG0_STRUC, *PLG_FBK_CFG0_STRUC;
-#else
-typedef	union	_LG_FBK_CFG0_STRUC	{
-	struct	{
-	    UINT32       OFDMMCS0FBK:4;	//initial value is 0
-	    UINT32       OFDMMCS1FBK:4;	//initial value is 0
-	    UINT32       OFDMMCS2FBK:4;	//initial value is 1
-	    UINT32       OFDMMCS3FBK:4;	//initial value is 2
-	    UINT32       OFDMMCS4FBK:4;	//initial value is 3
-	    UINT32       OFDMMCS5FBK:4;	//initial value is 4
-	    UINT32       OFDMMCS6FBK:4;	//initial value is 5
-	    UINT32       OFDMMCS7FBK:4;	//initial value is 6
-	}	field;
-	UINT32			word;
-}	LG_FBK_CFG0_STRUC, *PLG_FBK_CFG0_STRUC;
-#endif
-#define LG_FBK_CFG1		0x1360
-#ifdef RT_BIG_ENDIAN
-typedef	union	_LG_FBK_CFG1_STRUC	{
-	struct	{
-	    UINT32       rsv:16;
-	    UINT32       CCKMCS3FBK:4;	//initial value is 2
-	    UINT32       CCKMCS2FBK:4;	//initial value is 1
-	    UINT32       CCKMCS1FBK:4;	//initial value is 0
-	    UINT32       CCKMCS0FBK:4;	//initial value is 0
-	}	field;
-	UINT32			word;
-}	LG_FBK_CFG1_STRUC, *PLG_FBK_CFG1_STRUC;
-#else
-typedef	union	_LG_FBK_CFG1_STRUC	{
-	struct	{
-	    UINT32       CCKMCS0FBK:4;	//initial value is 0
-	    UINT32       CCKMCS1FBK:4;	//initial value is 0
-	    UINT32       CCKMCS2FBK:4;	//initial value is 1
-	    UINT32       CCKMCS3FBK:4;	//initial value is 2
-	    UINT32       rsv:16;
-	}	field;
-	UINT32			word;
-}	LG_FBK_CFG1_STRUC, *PLG_FBK_CFG1_STRUC;
-#endif
-
-//=======================================================
-//================ Protection Paramater================================
-//=======================================================
-#define CCK_PROT_CFG	0x1364		//CCK Protection
-#define ASIC_SHORTNAV		1
-#define ASIC_LONGNAV		2
-#define ASIC_RTS		1
-#define ASIC_CTS		2
-#ifdef RT_BIG_ENDIAN
-typedef	union	_PROT_CFG_STRUC	{
-	struct	{
-	    UINT32       rsv:5;
-	    UINT32       RTSThEn:1;	//RTS threshold enable on CCK TX
-	    UINT32       TxopAllowGF40:1;	//CCK TXOP allowance.0:disallow.
-	    UINT32       TxopAllowGF20:1;	//CCK TXOP allowance.0:disallow.
-	    UINT32       TxopAllowMM40:1;	//CCK TXOP allowance.0:disallow.
-	    UINT32       TxopAllowMM20:1;	//CCK TXOP allowance. 0:disallow.
-	    UINT32       TxopAllowOfdm:1;	//CCK TXOP allowance.0:disallow.
-	    UINT32       TxopAllowCck:1;	//CCK TXOP allowance.0:disallow.
-	    UINT32       ProtectNav:2;	//TXOP protection type for CCK TX. 0:None, 1:ShortNAVprotect,  2:LongNAVProtect, 3:rsv
-	    UINT32       ProtectCtrl:2;	//Protection control frame type for CCK TX. 1:RTS/CTS, 2:CTS-to-self, 0:None, 3:rsv
-	    UINT32       ProtectRate:16;	//Protection control frame rate for CCK TX(RTS/CTS/CFEnd).
-	}	field;
-	UINT32			word;
-}	PROT_CFG_STRUC, *PPROT_CFG_STRUC;
-#else
-typedef	union	_PROT_CFG_STRUC	{
-	struct	{
-	    UINT32       ProtectRate:16;	//Protection control frame rate for CCK TX(RTS/CTS/CFEnd).
-	    UINT32       ProtectCtrl:2;	//Protection control frame type for CCK TX. 1:RTS/CTS, 2:CTS-to-self, 0:None, 3:rsv
-	    UINT32       ProtectNav:2;	//TXOP protection type for CCK TX. 0:None, 1:ShortNAVprotect,  2:LongNAVProtect, 3:rsv
-	    UINT32       TxopAllowCck:1;	//CCK TXOP allowance.0:disallow.
-	    UINT32       TxopAllowOfdm:1;	//CCK TXOP allowance.0:disallow.
-	    UINT32       TxopAllowMM20:1;	//CCK TXOP allowance. 0:disallow.
-	    UINT32       TxopAllowMM40:1;	//CCK TXOP allowance.0:disallow.
-	    UINT32       TxopAllowGF20:1;	//CCK TXOP allowance.0:disallow.
-	    UINT32       TxopAllowGF40:1;	//CCK TXOP allowance.0:disallow.
-	    UINT32       RTSThEn:1;	//RTS threshold enable on CCK TX
-	    UINT32       rsv:5;
-	}	field;
-	UINT32			word;
-}	PROT_CFG_STRUC, *PPROT_CFG_STRUC;
-#endif
-
-#define OFDM_PROT_CFG	0x1368		//OFDM Protection
-#define MM20_PROT_CFG	0x136C		//MM20 Protection
-#define MM40_PROT_CFG	0x1370		//MM40 Protection
-#define GF20_PROT_CFG	0x1374		//GF20 Protection
-#define GF40_PROT_CFG	0x1378		//GR40 Protection
-#define EXP_CTS_TIME	0x137C		//
-#define EXP_ACK_TIME	0x1380		//
-
-//
-//  4.4 MAC RX configuration registers (offset:0x1400)
-//
-#define RX_FILTR_CFG	0x1400			//TXRX_CSR0
-#define AUTO_RSP_CFG	0x1404			//TXRX_CSR4
-//
-// TXRX_CSR4: Auto-Responder/
-//
-#ifdef RT_BIG_ENDIAN
-typedef union _AUTO_RSP_CFG_STRUC {
- struct {
-     UINT32        :24;
-     UINT32       AckCtsPsmBit:1;   // Power bit value in conrtrol frame
-     UINT32       DualCTSEn:1;   // Power bit value in conrtrol frame
-     UINT32       rsv:1;   // Power bit value in conrtrol frame
-     UINT32       AutoResponderPreamble:1;    // 0:long, 1:short preamble
-     UINT32       CTS40MRef:1;  // Response CTS 40MHz duplicate mode
-     UINT32       CTS40MMode:1;  // Response CTS 40MHz duplicate mode
-     UINT32       BACAckPolicyEnable:1;    // 0:long, 1:short preamble
-     UINT32       AutoResponderEnable:1;
- } field;
- UINT32   word;
-} AUTO_RSP_CFG_STRUC, *PAUTO_RSP_CFG_STRUC;
-#else
-typedef union _AUTO_RSP_CFG_STRUC {
- struct {
-     UINT32       AutoResponderEnable:1;
-     UINT32       BACAckPolicyEnable:1;    // 0:long, 1:short preamble
-     UINT32       CTS40MMode:1;  // Response CTS 40MHz duplicate mode
-     UINT32       CTS40MRef:1;  // Response CTS 40MHz duplicate mode
-     UINT32       AutoResponderPreamble:1;    // 0:long, 1:short preamble
-     UINT32       rsv:1;   // Power bit value in conrtrol frame
-     UINT32       DualCTSEn:1;   // Power bit value in conrtrol frame
-     UINT32       AckCtsPsmBit:1;   // Power bit value in conrtrol frame
-     UINT32        :24;
- } field;
- UINT32   word;
-} AUTO_RSP_CFG_STRUC, *PAUTO_RSP_CFG_STRUC;
-#endif
-
-#define LEGACY_BASIC_RATE	0x1408	//  TXRX_CSR5           0x3054
-#define HT_BASIC_RATE		0x140c
-#define HT_CTRL_CFG		0x1410
-#define SIFS_COST_CFG		0x1414
-#define RX_PARSER_CFG		0x1418	//Set NAV for all received frames
-
-//
-//  4.5 MAC Security configuration (offset:0x1500)
-//
-#define TX_SEC_CNT0		0x1500		//
-#define RX_SEC_CNT0		0x1504		//
-#define CCMP_FC_MUTE		0x1508		//
-//
-//  4.6 HCCA/PSMP (offset:0x1600)
-//
-#define TXOP_HLDR_ADDR0		0x1600
-#define TXOP_HLDR_ADDR1		0x1604
-#define TXOP_HLDR_ET		0x1608
-#define QOS_CFPOLL_RA_DW0		0x160c
-#define QOS_CFPOLL_A1_DW1		0x1610
-#define QOS_CFPOLL_QC		0x1614
-//
-//  4.7 MAC Statistis registers (offset:0x1700)
-//
-#define RX_STA_CNT0		0x1700		//
-#define RX_STA_CNT1		0x1704		//
-#define RX_STA_CNT2		0x1708		//
-
-//
-// RX_STA_CNT0_STRUC: RX PLCP error count & RX CRC error count
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_RX_STA_CNT0_STRUC	{
-	struct	{
-	    USHORT  PhyErr;
-	    USHORT  CrcErr;
-	}	field;
-	UINT32			word;
-}	RX_STA_CNT0_STRUC, *PRX_STA_CNT0_STRUC;
-#else
-typedef	union	_RX_STA_CNT0_STRUC	{
-	struct	{
-	    USHORT  CrcErr;
-	    USHORT  PhyErr;
-	}	field;
-	UINT32			word;
-}	RX_STA_CNT0_STRUC, *PRX_STA_CNT0_STRUC;
-#endif
-
-//
-// RX_STA_CNT1_STRUC: RX False CCA count & RX LONG frame count
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_RX_STA_CNT1_STRUC	{
-	struct	{
-	    USHORT  PlcpErr;
-	    USHORT  FalseCca;
-	}	field;
-	UINT32			word;
-}	RX_STA_CNT1_STRUC, *PRX_STA_CNT1_STRUC;
-#else
-typedef	union	_RX_STA_CNT1_STRUC	{
-	struct	{
-	    USHORT  FalseCca;
-	    USHORT  PlcpErr;
-	}	field;
-	UINT32			word;
-}	RX_STA_CNT1_STRUC, *PRX_STA_CNT1_STRUC;
-#endif
-
-//
-// RX_STA_CNT2_STRUC:
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_RX_STA_CNT2_STRUC	{
-	struct	{
-	    USHORT  RxFifoOverflowCount;
-	    USHORT  RxDupliCount;
-	}	field;
-	UINT32			word;
-}	RX_STA_CNT2_STRUC, *PRX_STA_CNT2_STRUC;
-#else
-typedef	union	_RX_STA_CNT2_STRUC	{
-	struct	{
-	    USHORT  RxDupliCount;
-	    USHORT  RxFifoOverflowCount;
-	}	field;
-	UINT32			word;
-}	RX_STA_CNT2_STRUC, *PRX_STA_CNT2_STRUC;
-#endif
-#define TX_STA_CNT0		0x170C		//
-//
-// STA_CSR3: TX Beacon count
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_STA_CNT0_STRUC	{
-	struct	{
-	    USHORT  TxBeaconCount;
-	    USHORT  TxFailCount;
-	}	field;
-	UINT32			word;
-}	TX_STA_CNT0_STRUC, *PTX_STA_CNT0_STRUC;
-#else
-typedef	union	_TX_STA_CNT0_STRUC	{
-	struct	{
-	    USHORT  TxFailCount;
-	    USHORT  TxBeaconCount;
-	}	field;
-	UINT32			word;
-}	TX_STA_CNT0_STRUC, *PTX_STA_CNT0_STRUC;
-#endif
-#define TX_STA_CNT1		0x1710		//
-//
-// TX_STA_CNT1: TX tx count
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_STA_CNT1_STRUC	{
-	struct	{
-	    USHORT  TxRetransmit;
-	    USHORT  TxSuccess;
-	}	field;
-	UINT32			word;
-}	TX_STA_CNT1_STRUC, *PTX_STA_CNT1_STRUC;
-#else
-typedef	union	_TX_STA_CNT1_STRUC	{
-	struct	{
-	    USHORT  TxSuccess;
-	    USHORT  TxRetransmit;
-	}	field;
-	UINT32			word;
-}	TX_STA_CNT1_STRUC, *PTX_STA_CNT1_STRUC;
-#endif
-#define TX_STA_CNT2		0x1714		//
-//
-// TX_STA_CNT2: TX tx count
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_STA_CNT2_STRUC	{
-	struct	{
-	    USHORT  TxUnderFlowCount;
-	    USHORT  TxZeroLenCount;
-	}	field;
-	UINT32			word;
-}	TX_STA_CNT2_STRUC, *PTX_STA_CNT2_STRUC;
-#else
-typedef	union	_TX_STA_CNT2_STRUC	{
-	struct	{
-	    USHORT  TxZeroLenCount;
-	    USHORT  TxUnderFlowCount;
-	}	field;
-	UINT32			word;
-}	TX_STA_CNT2_STRUC, *PTX_STA_CNT2_STRUC;
-#endif
-#define TX_STA_FIFO		0x1718		//
-//
-// TX_STA_FIFO_STRUC: TX Result for specific PID status fifo register
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union PACKED _TX_STA_FIFO_STRUC	{
-	struct	{
-		UINT32		Reserve:2;
-		UINT32		TxBF:1; // 3*3
-		UINT32		SuccessRate:13;	//include MCS, mode ,shortGI, BW settingSame format as TXWI Word 0 Bit 31-16.
-//		UINT32		SuccessRate:16;	//include MCS, mode ,shortGI, BW settingSame format as TXWI Word 0 Bit 31-16.
-		UINT32		wcid:8;		//wireless client index
-		UINT32       	TxAckRequired:1;    // ack required
-		UINT32       	TxAggre:1;    // Tx is aggregated
-		UINT32       	TxSuccess:1;   // Tx success. whether success or not
-		UINT32       	PidType:4;
-		UINT32       	bValid:1;   // 1:This register contains a valid TX result
-	}	field;
-	UINT32			word;
-}	TX_STA_FIFO_STRUC, *PTX_STA_FIFO_STRUC;
-#else
-typedef	union PACKED _TX_STA_FIFO_STRUC	{
-	struct	{
-		UINT32       	bValid:1;   // 1:This register contains a valid TX result
-		UINT32       	PidType:4;
-		UINT32       	TxSuccess:1;   // Tx No retry success
-		UINT32       	TxAggre:1;    // Tx Retry Success
-		UINT32       	TxAckRequired:1;    // Tx fail
-		UINT32		wcid:8;		//wireless client index
-//		UINT32		SuccessRate:16;	//include MCS, mode ,shortGI, BW settingSame format as TXWI Word 0 Bit 31-16.
-		UINT32		SuccessRate:13;	//include MCS, mode ,shortGI, BW settingSame format as TXWI Word 0 Bit 31-16.
-		UINT32		TxBF:1;
-		UINT32		Reserve:2;
-	}	field;
-	UINT32			word;
-}	TX_STA_FIFO_STRUC, *PTX_STA_FIFO_STRUC;
-#endif
-// Debug counter
-#define TX_AGG_CNT	0x171c
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_AGG_CNT_STRUC	{
-	struct	{
-	    USHORT  AggTxCount;
-	    USHORT  NonAggTxCount;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT_STRUC, *PTX_AGG_CNT_STRUC;
-#else
-typedef	union	_TX_AGG_CNT_STRUC	{
-	struct	{
-	    USHORT  NonAggTxCount;
-	    USHORT  AggTxCount;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT_STRUC, *PTX_AGG_CNT_STRUC;
-#endif
-// Debug counter
-#define TX_AGG_CNT0	0x1720
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_AGG_CNT0_STRUC	{
-	struct	{
-	    USHORT  AggSize2Count;
-	    USHORT  AggSize1Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT0_STRUC, *PTX_AGG_CNT0_STRUC;
-#else
-typedef	union	_TX_AGG_CNT0_STRUC	{
-	struct	{
-	    USHORT  AggSize1Count;
-	    USHORT  AggSize2Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT0_STRUC, *PTX_AGG_CNT0_STRUC;
-#endif
-// Debug counter
-#define TX_AGG_CNT1	0x1724
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_AGG_CNT1_STRUC	{
-	struct	{
-	    USHORT  AggSize4Count;
-	    USHORT  AggSize3Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT1_STRUC, *PTX_AGG_CNT1_STRUC;
-#else
-typedef	union	_TX_AGG_CNT1_STRUC	{
-	struct	{
-	    USHORT  AggSize3Count;
-	    USHORT  AggSize4Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT1_STRUC, *PTX_AGG_CNT1_STRUC;
-#endif
-#define TX_AGG_CNT2	0x1728
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_AGG_CNT2_STRUC	{
-	struct	{
-	    USHORT  AggSize6Count;
-	    USHORT  AggSize5Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT2_STRUC, *PTX_AGG_CNT2_STRUC;
-#else
-typedef	union	_TX_AGG_CNT2_STRUC	{
-	struct	{
-	    USHORT  AggSize5Count;
-	    USHORT  AggSize6Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT2_STRUC, *PTX_AGG_CNT2_STRUC;
-#endif
-// Debug counter
-#define TX_AGG_CNT3	0x172c
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_AGG_CNT3_STRUC	{
-	struct	{
-	    USHORT  AggSize8Count;
-	    USHORT  AggSize7Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT3_STRUC, *PTX_AGG_CNT3_STRUC;
-#else
-typedef	union	_TX_AGG_CNT3_STRUC	{
-	struct	{
-	    USHORT  AggSize7Count;
-	    USHORT  AggSize8Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT3_STRUC, *PTX_AGG_CNT3_STRUC;
-#endif
-// Debug counter
-#define TX_AGG_CNT4	0x1730
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_AGG_CNT4_STRUC	{
-	struct	{
-	    USHORT  AggSize10Count;
-	    USHORT  AggSize9Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT4_STRUC, *PTX_AGG_CNT4_STRUC;
-#else
-typedef	union	_TX_AGG_CNT4_STRUC	{
-	struct	{
-	    USHORT  AggSize9Count;
-	    USHORT  AggSize10Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT4_STRUC, *PTX_AGG_CNT4_STRUC;
-#endif
-#define TX_AGG_CNT5	0x1734
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_AGG_CNT5_STRUC	{
-	struct	{
-	    USHORT  AggSize12Count;
-	    USHORT  AggSize11Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT5_STRUC, *PTX_AGG_CNT5_STRUC;
-#else
-typedef	union	_TX_AGG_CNT5_STRUC	{
-	struct	{
-	    USHORT  AggSize11Count;
-	    USHORT  AggSize12Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT5_STRUC, *PTX_AGG_CNT5_STRUC;
-#endif
-#define TX_AGG_CNT6		0x1738
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_AGG_CNT6_STRUC	{
-	struct	{
-	    USHORT  AggSize14Count;
-	    USHORT  AggSize13Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT6_STRUC, *PTX_AGG_CNT6_STRUC;
-#else
-typedef	union	_TX_AGG_CNT6_STRUC	{
-	struct	{
-	    USHORT  AggSize13Count;
-	    USHORT  AggSize14Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT6_STRUC, *PTX_AGG_CNT6_STRUC;
-#endif
-#define TX_AGG_CNT7		0x173c
-#ifdef RT_BIG_ENDIAN
-typedef	union	_TX_AGG_CNT7_STRUC	{
-	struct	{
-	    USHORT  AggSize16Count;
-	    USHORT  AggSize15Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT7_STRUC, *PTX_AGG_CNT7_STRUC;
-#else
-typedef	union	_TX_AGG_CNT7_STRUC	{
-	struct	{
-	    USHORT  AggSize15Count;
-	    USHORT  AggSize16Count;
-	}	field;
-	UINT32			word;
-}	TX_AGG_CNT7_STRUC, *PTX_AGG_CNT7_STRUC;
-#endif
-#define MPDU_DENSITY_CNT		0x1740
-#ifdef RT_BIG_ENDIAN
-typedef	union	_MPDU_DEN_CNT_STRUC	{
-	struct	{
-	    USHORT  RXZeroDelCount;	//RX zero length delimiter count
-	    USHORT  TXZeroDelCount;	//TX zero length delimiter count
-	}	field;
-	UINT32			word;
-}	MPDU_DEN_CNT_STRUC, *PMPDU_DEN_CNT_STRUC;
-#else
-typedef	union	_MPDU_DEN_CNT_STRUC	{
-	struct	{
-	    USHORT  TXZeroDelCount;	//TX zero length delimiter count
-	    USHORT  RXZeroDelCount;	//RX zero length delimiter count
-	}	field;
-	UINT32			word;
-}	MPDU_DEN_CNT_STRUC, *PMPDU_DEN_CNT_STRUC;
-#endif
-//
-// TXRX control registers - base address 0x3000
-//
-// rt2860b  UNKNOWN reg use R/O Reg Addr 0x77d0 first..
-#define TXRX_CSR1           0x77d0
-
-//
-// Security key table memory, base address = 0x1000
-//
-#define MAC_WCID_BASE		0x1800 //8-bytes(use only 6-bytes) * 256 entry =
-#define HW_WCID_ENTRY_SIZE   8
-#define PAIRWISE_KEY_TABLE_BASE     0x4000      // 32-byte * 256-entry =  -byte
-#define HW_KEY_ENTRY_SIZE           0x20
-#define PAIRWISE_IVEIV_TABLE_BASE     0x6000      // 8-byte * 256-entry =  -byte
-#define MAC_IVEIV_TABLE_BASE     0x6000      // 8-byte * 256-entry =  -byte
-#define HW_IVEIV_ENTRY_SIZE   8
-#define MAC_WCID_ATTRIBUTE_BASE     0x6800      // 4-byte * 256-entry =  -byte
-#define HW_WCID_ATTRI_SIZE   4
-#define WCID_RESERVED          		0x6bfc
-#define SHARED_KEY_TABLE_BASE       0x6c00      // 32-byte * 16-entry = 512-byte
-#define SHARED_KEY_MODE_BASE       0x7000      // 32-byte * 16-entry = 512-byte
-#define HW_SHARED_KEY_MODE_SIZE   4
-#define SHAREDKEYTABLE			0
-#define PAIRWISEKEYTABLE			1
-
-
-#ifdef RT_BIG_ENDIAN
-typedef	union	_SHAREDKEY_MODE_STRUC	{
-	struct	{
-		UINT32       :1;
-		UINT32       Bss1Key3CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss1Key2CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss1Key1CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss1Key0CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss0Key3CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss0Key2CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss0Key1CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss0Key0CipherAlg:3;
-	}	field;
-	UINT32			word;
-}	SHAREDKEY_MODE_STRUC, *PSHAREDKEY_MODE_STRUC;
-#else
-typedef	union	_SHAREDKEY_MODE_STRUC	{
-	struct	{
-		UINT32       Bss0Key0CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss0Key1CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss0Key2CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss0Key3CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss1Key0CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss1Key1CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss1Key2CipherAlg:3;
-		UINT32       :1;
-		UINT32       Bss1Key3CipherAlg:3;
-		UINT32       :1;
-	}	field;
-	UINT32			word;
-}	SHAREDKEY_MODE_STRUC, *PSHAREDKEY_MODE_STRUC;
-#endif
-// 64-entry for pairwise key table
-typedef struct _HW_WCID_ENTRY {  // 8-byte per entry
-    UCHAR   Address[6];
-    UCHAR   Rsv[2];
-} HW_WCID_ENTRY, PHW_WCID_ENTRY;
-
-
-
-//
-// Other on-chip shared memory space, base = 0x2000
-//
-
-// CIS space - base address = 0x2000
-#define HW_CIS_BASE             0x2000
-
-// Carrier-sense CTS frame base address. It's where mac stores carrier-sense frame for carrier-sense function.
-#define HW_CS_CTS_BASE			0x7700
-// DFS CTS frame base address. It's where mac stores CTS frame for DFS.
-#define HW_DFS_CTS_BASE			0x7780
-#define HW_CTS_FRAME_SIZE		0x80
-
-// 2004-11-08 john - since NULL frame won't be that long (256 byte). We steal 16 tail bytes
-// to save debugging settings
-#define HW_DEBUG_SETTING_BASE   0x77f0  // 0x77f0~0x77ff total 16 bytes
-#define HW_DEBUG_SETTING_BASE2   0x7770  // 0x77f0~0x77ff total 16 bytes
-
-// In order to support maximum 8 MBSS and its maximum length is 512 for each beacon
-// Three section discontinue memory segments will be used.
-// 1. The original region for BCN 0~3
-// 2. Extract memory from FCE table for BCN 4~5
-// 3. Extract memory from Pair-wise key table for BCN 6~7
-//	  It occupied those memory of wcid 238~253 for BCN 6
-//						      and wcid 222~237 for BCN 7
-#define HW_BEACON_MAX_SIZE      0x1000 /* unit: byte */
-#define HW_BEACON_BASE0         0x7800
-#define HW_BEACON_BASE1         0x7A00
-#define HW_BEACON_BASE2         0x7C00
-#define HW_BEACON_BASE3         0x7E00
-#define HW_BEACON_BASE4         0x7200
-#define HW_BEACON_BASE5         0x7400
-#define HW_BEACON_BASE6         0x5DC0
-#define HW_BEACON_BASE7         0x5BC0
-
-#define HW_BEACON_MAX_COUNT     8
-#define HW_BEACON_OFFSET		0x0200
-#define HW_BEACON_CONTENT_LEN	(HW_BEACON_OFFSET - TXWI_SIZE)
-
-// HOST-MCU shared memory - base address = 0x2100
-#define HOST_CMD_CSR		0x404
-#define H2M_MAILBOX_CSR         0x7010
-#define H2M_MAILBOX_CID         0x7014
-#define H2M_MAILBOX_STATUS      0x701c
-#define H2M_INT_SRC             0x7024
-#define H2M_BBP_AGENT           0x7028
-#define M2H_CMD_DONE_CSR        0x000c
-#define MCU_TXOP_ARRAY_BASE     0x000c   // TODO: to be provided by Albert
-#define MCU_TXOP_ENTRY_SIZE     32       // TODO: to be provided by Albert
-#define MAX_NUM_OF_TXOP_ENTRY   16       // TODO: must be same with 8051 firmware
-#define MCU_MBOX_VERSION        0x01     // TODO: to be confirmed by Albert
-#define MCU_MBOX_VERSION_OFFSET 5        // TODO: to be provided by Albert
-
-//
-// Host DMA registers - base address 0x200 .  TX0-3=EDCAQid0-3, TX4=HCCA, TX5=MGMT,
-//
-//
-//  DMA RING DESCRIPTOR
-//
-#define E2PROM_CSR          0x0004
-#define IO_CNTL_CSR         0x77d0
-
-#ifdef RT2870
-// 8051 firmware image for usb - use last-half base address = 0x3000
-#define FIRMWARE_IMAGE_BASE     0x3000
-#define MAX_FIRMWARE_IMAGE_SIZE 0x1000    // 4kbyte
-#endif // RT2870 //
-
-// TODO: ????? old RT2560 registers. to keep them or remove them?
-//#define MCAST0                  0x0178  // multicast filter register 0
-//#define MCAST1                  0x017c  // multicast filter register 1
-
-
-// ================================================================
-// Tx /	Rx / Mgmt ring descriptor definition
-// ================================================================
-
-// the following PID values are used to mark outgoing frame type in TXD->PID so that
-// proper TX statistics can be collected based on these categories
-// b3-2 of PID field -
-#define PID_MGMT			0x05
-#define PID_BEACON			0x0c
-#define PID_DATA_NORMALUCAST	 	0x02
-#define PID_DATA_AMPDU	 	0x04
-#define PID_DATA_NO_ACK    	0x08
-#define PID_DATA_NOT_NORM_ACK	 	0x03
-// value domain of pTxD->HostQId (4-bit: 0~15)
-#define QID_AC_BK               1   // meet ACI definition in 802.11e
-#define QID_AC_BE               0   // meet ACI definition in 802.11e
-#define QID_AC_VI               2
-#define QID_AC_VO               3
-#define QID_HCCA                4
-#define NUM_OF_TX_RING          5
-#define QID_MGMT                13
-#define QID_RX                  14
-#define QID_OTHER               15
-
-
-// ------------------------------------------------------
-// BBP & RF	definition
-// ------------------------------------------------------
-#define	BUSY		                1
-#define	IDLE		                0
-
-#define	RF_R00					    0
-#define	RF_R01					    1
-#define	RF_R02					    2
-#define	RF_R03					    3
-#define	RF_R04					    4
-#define	RF_R05					    5
-#define	RF_R06					    6
-#define	RF_R07					    7
-#define	RF_R08					    8
-#define	RF_R09					    9
-#define	RF_R10					    10
-#define	RF_R11					    11
-#define	RF_R12					    12
-#define	RF_R13					    13
-#define	RF_R14					    14
-#define	RF_R15					    15
-#define	RF_R16					    16
-#define	RF_R17					    17
-#define	RF_R18					    18
-#define	RF_R19					    19
-#define	RF_R20					    20
-#define	RF_R21					    21
-#define	RF_R22					    22
-#define	RF_R23					    23
-#define	RF_R24					    24
-#define	RF_R25					    25
-#define	RF_R26					    26
-#define	RF_R27					    27
-#define	RF_R28					    28
-#define	RF_R29					    29
-#define	RF_R30					    30
-#define	RF_R31					    31
-
-#define	BBP_R0					    0  // version
-#define	BBP_R1				        1  // TSSI
-#define	BBP_R2          			2  // TX configure
-#define BBP_R3                      3
-#define BBP_R4                      4
-#define BBP_R5                      5
-#define BBP_R6                      6
-#define	BBP_R14			            14 // RX configure
-#define BBP_R16                     16
-#define BBP_R17                     17 // RX sensibility
-#define BBP_R18                     18
-#define BBP_R21                     21
-#define BBP_R22                     22
-#define BBP_R24                     24
-#define BBP_R25                     25
-#define BBP_R31                     31
-#define BBP_R49                     49 //TSSI
-#define BBP_R50                     50
-#define BBP_R51                     51
-#define BBP_R52                     52
-#define BBP_R55                     55
-#define BBP_R62                     62 // Rx SQ0 Threshold HIGH
-#define BBP_R63                     63
-#define BBP_R64                     64
-#define BBP_R65                     65
-#define BBP_R66                     66
-#define BBP_R67                     67
-#define BBP_R68                     68
-#define BBP_R69                     69
-#define BBP_R70                     70 // Rx AGC SQ CCK Xcorr threshold
-#define BBP_R73                     73
-#define BBP_R75						75
-#define BBP_R77                     77
-#define BBP_R79                     79
-#define BBP_R80                     80
-#define BBP_R81                     81
-#define BBP_R82                     82
-#define BBP_R83                     83
-#define BBP_R84                     84
-#define BBP_R86						86
-#define BBP_R91						91
-#define BBP_R92						92
-#define BBP_R94                     94 // Tx Gain Control
-#define BBP_R103                    103
-#define BBP_R105                    105
-#define BBP_R113                    113
-#define BBP_R114                    114
-#define BBP_R115                    115
-#define BBP_R116                    116
-#define BBP_R117                    117
-#define BBP_R118                    118
-#define BBP_R119                    119
-#define BBP_R120                    120
-#define BBP_R121                    121
-#define BBP_R122                    122
-#define BBP_R123                    123
-#ifdef RT30xx
-#define BBP_R138                    138 // add by johnli, RF power sequence setup, ADC dynamic on/off control
-#endif // RT30xx //
-
-
-#define BBPR94_DEFAULT              0x06 // Add 1 value will gain 1db
-
-//#define PHY_TR_SWITCH_TIME          5  // usec
-
-//#define BBP_R17_LOW_SENSIBILITY     0x50
-//#define BBP_R17_MID_SENSIBILITY     0x41
-//#define BBP_R17_DYNAMIC_UP_BOUND    0x40
-#define RSSI_FOR_VERY_LOW_SENSIBILITY -35
-#define RSSI_FOR_LOW_SENSIBILITY      -58
-#define RSSI_FOR_MID_LOW_SENSIBILITY  -80
-#define RSSI_FOR_MID_SENSIBILITY      -90
-
-//-------------------------------------------------------------------------
-// EEPROM definition
-//-------------------------------------------------------------------------
-#define EEDO                        0x08
-#define EEDI                        0x04
-#define EECS                        0x02
-#define EESK                        0x01
-#define EERL                        0x80
-
-#define EEPROM_WRITE_OPCODE         0x05
-#define EEPROM_READ_OPCODE          0x06
-#define EEPROM_EWDS_OPCODE          0x10
-#define EEPROM_EWEN_OPCODE          0x13
-
-#define	NUM_EEPROM_BBP_PARMS		19			// Include NIC Config 0, 1, CR, TX ALC step, BBPs
-#define	NUM_EEPROM_TX_G_PARMS		7
-#define	EEPROM_NIC1_OFFSET          0x34		// The address is from NIC config 0, not BBP register ID
-#define	EEPROM_NIC2_OFFSET          0x36		// The address is from NIC config 0, not BBP register ID
-#define	EEPROM_BBP_BASE_OFFSET		0xf0		// The address is from NIC config 0, not BBP register ID
-#define	EEPROM_G_TX_PWR_OFFSET		0x52
-#define	EEPROM_G_TX2_PWR_OFFSET		0x60
-#define EEPROM_LED1_OFFSET			0x3c
-#define EEPROM_LED2_OFFSET			0x3e
-#define EEPROM_LED3_OFFSET			0x40
-#define EEPROM_LNA_OFFSET			0x44
-#define EEPROM_RSSI_BG_OFFSET		0x46
-#define EEPROM_RSSI_A_OFFSET		0x4a
-#define EEPROM_DEFINE_MAX_TXPWR		0x4e
-#define EEPROM_TXPOWER_BYRATE_20MHZ_2_4G	0xde	// 20MHZ 2.4G tx power.
-#define EEPROM_TXPOWER_BYRATE_40MHZ_2_4G	0xee	// 40MHZ 2.4G tx power.
-#define EEPROM_TXPOWER_BYRATE_20MHZ_5G		0xfa	// 20MHZ 5G tx power.
-#define EEPROM_TXPOWER_BYRATE_40MHZ_5G		0x10a	// 40MHZ 5G tx power.
-#define EEPROM_A_TX_PWR_OFFSET      0x78
-#define EEPROM_A_TX2_PWR_OFFSET      0xa6
-//#define EEPROM_Japan_TX_PWR_OFFSET      0x90 // 802.11j
-//#define EEPROM_Japan_TX2_PWR_OFFSET      0xbe
-//#define EEPROM_TSSI_REF_OFFSET	0x54
-//#define EEPROM_TSSI_DELTA_OFFSET	0x24
-//#define EEPROM_CCK_TX_PWR_OFFSET  0x62
-//#define EEPROM_CALIBRATE_OFFSET	0x7c
-#define EEPROM_VERSION_OFFSET       0x02
-#define	EEPROM_FREQ_OFFSET			0x3a
-#define EEPROM_TXPOWER_BYRATE 	0xde	// 20MHZ power.
-#define EEPROM_TXPOWER_DELTA		0x50	// 20MHZ AND 40 MHZ use different power. This is delta in 40MHZ.
-#define VALID_EEPROM_VERSION        1
-
-// PairKeyMode definition
-#define PKMODE_NONE                 0
-#define PKMODE_WEP64                1
-#define PKMODE_WEP128               2
-#define PKMODE_TKIP                 3
-#define PKMODE_AES                  4
-#define PKMODE_CKIP64               5
-#define PKMODE_CKIP128              6
-#define PKMODE_TKIP_NO_MIC          7       // MIC appended by driver: not a valid value in hardware key table
-
-// =================================================================================
-// WCID  format
-// =================================================================================
-//7.1	WCID  ENTRY  format  : 8bytes
-typedef	struct	_WCID_ENTRY_STRUC {
-	UCHAR		RXBABitmap7;    // bit0 for TID8, bit7 for TID 15
-	UCHAR		RXBABitmap0;    // bit0 for TID0, bit7 for TID 7
-	UCHAR		MAC[6];	// 0 for shared key table.  1 for pairwise key table
-}	WCID_ENTRY_STRUC, *PWCID_ENTRY_STRUC;
-
-//8.1.1	SECURITY  KEY  format  : 8DW
-// 32-byte per entry, total 16-entry for shared key table, 64-entry for pairwise key table
-typedef struct _HW_KEY_ENTRY {          // 32-byte per entry
-    UCHAR   Key[16];
-    UCHAR   TxMic[8];
-    UCHAR   RxMic[8];
-} HW_KEY_ENTRY, *PHW_KEY_ENTRY;
-
-//8.1.2	IV/EIV  format  : 2DW
-
-//8.1.3	RX attribute entry format  : 1DW
-#ifdef RT_BIG_ENDIAN
-typedef	struct	_MAC_ATTRIBUTE_STRUC {
-	UINT32		rsv:22;
-	UINT32		RXWIUDF:3;
-	UINT32		BSSIDIdx:3; //multipleBSS index for the WCID
-	UINT32		PairKeyMode:3;
-	UINT32		KeyTab:1;	// 0 for shared key table.  1 for pairwise key table
-}	MAC_ATTRIBUTE_STRUC, *PMAC_ATTRIBUTE_STRUC;
-#else
-typedef	struct	_MAC_ATTRIBUTE_STRUC {
-	UINT32		KeyTab:1;	// 0 for shared key table.  1 for pairwise key table
-	UINT32		PairKeyMode:3;
-	UINT32		BSSIDIdx:3; //multipleBSS index for the WCID
-	UINT32		RXWIUDF:3;
-	UINT32		rsv:22;
-}	MAC_ATTRIBUTE_STRUC, *PMAC_ATTRIBUTE_STRUC;
-#endif
-
-
-// =================================================================================
-// TX / RX ring descriptor format
-// =================================================================================
-
-// the first 24-byte in TXD is called TXINFO and will be DMAed to MAC block through TXFIFO.
-// MAC block use this TXINFO to control the transmission behavior of this frame.
-#define FIFO_MGMT                 0
-#define FIFO_HCCA                 1
-#define FIFO_EDCA                 2
-
-//
-// TX descriptor format, Tx	ring, Mgmt Ring
-//
-#ifdef RT_BIG_ENDIAN
-typedef	struct	PACKED _TXD_STRUC {
-	// Word 0
-	UINT32		SDPtr0;
-	// Word 1
-	UINT32		DMADONE:1;
-	UINT32		LastSec0:1;
-	UINT32		SDLen0:14;
-	UINT32		Burst:1;
-	UINT32		LastSec1:1;
-	UINT32		SDLen1:14;
-	// Word 2
-	UINT32		SDPtr1;
-	// Word 3
-	UINT32		ICO:1;
-	UINT32		UCO:1;
-	UINT32		TCO:1;
-	UINT32		rsv:2;
-	UINT32		QSEL:2;	// select on-chip FIFO ID for 2nd-stage output scheduler.0:MGMT, 1:HCCA 2:EDCA
-	UINT32		WIV:1;	// Wireless Info Valid. 1 if Driver already fill WI,  o if DMA needs to copy WI to correctposition
-	UINT32		rsv2:24;
-}	TXD_STRUC, *PTXD_STRUC;
-#else
-typedef	struct	PACKED _TXD_STRUC {
-	// Word	0
-	UINT32		SDPtr0;
-	// Word	1
-	UINT32		SDLen1:14;
-	UINT32		LastSec1:1;
-	UINT32		Burst:1;
-	UINT32		SDLen0:14;
-	UINT32		LastSec0:1;
-	UINT32		DMADONE:1;
-	//Word2
-	UINT32		SDPtr1;
-	//Word3
-	UINT32		rsv2:24;
-	UINT32		WIV:1;	// Wireless Info Valid. 1 if Driver already fill WI,  o if DMA needs to copy WI to correctposition
-	UINT32		QSEL:2;	// select on-chip FIFO ID for 2nd-stage output scheduler.0:MGMT, 1:HCCA 2:EDCA
-	UINT32		rsv:2;
-	UINT32		TCO:1;	//
-	UINT32		UCO:1;	//
-	UINT32		ICO:1;	//
-}	TXD_STRUC, *PTXD_STRUC;
-#endif
-
-
-//
-// TXD Wireless Information format for Tx ring and Mgmt Ring
-//
-//txop : for txop mode
-// 0:txop for the MPDU frame will be handles by ASIC by register
-// 1/2/3:the MPDU frame is send after PIFS/backoff/SIFS
-#ifdef RT_BIG_ENDIAN
-typedef	struct	PACKED _TXWI_STRUC {
-	// Word 0
-	UINT32		PHYMODE:2;
-	UINT32		TxBF:1;	// 3*3
-	UINT32		rsv2:1;
-//	UINT32		rsv2:2;
-	UINT32		Ifs:1;	//
-	UINT32		STBC:2;	//channel bandwidth 20MHz or 40 MHz
-	UINT32		ShortGI:1;
-	UINT32		BW:1;	//channel bandwidth 20MHz or 40 MHz
-	UINT32		MCS:7;
-
-	UINT32		rsv:6;
-	UINT32		txop:2;	//tx back off mode 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs only when previous frame exchange is successful.
-	UINT32		MpduDensity:3;
-	UINT32		AMPDU:1;
-
-	UINT32		TS:1;
-	UINT32		CFACK:1;
-	UINT32		MIMOps:1;	// the remote peer is in dynamic MIMO-PS mode
-	UINT32		FRAG:1;		// 1 to inform TKIP engine this is a fragment.
-	// Word 1
-	UINT32		PacketId:4;
-	UINT32		MPDUtotalByteCount:12;
-	UINT32		WirelessCliID:8;
-	UINT32		BAWinSize:6;
-	UINT32		NSEQ:1;
-	UINT32		ACK:1;
-	// Word 2
-	UINT32		IV;
-	// Word 3
-	UINT32		EIV;
-}	TXWI_STRUC, *PTXWI_STRUC;
-#else
-typedef	struct	PACKED _TXWI_STRUC {
-	// Word	0
-	UINT32		FRAG:1;		// 1 to inform TKIP engine this is a fragment.
-	UINT32		MIMOps:1;	// the remote peer is in dynamic MIMO-PS mode
-	UINT32		CFACK:1;
-	UINT32		TS:1;
-
-	UINT32		AMPDU:1;
-	UINT32		MpduDensity:3;
-	UINT32		txop:2;	//FOR "THIS" frame. 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs only when previous frame exchange is successful.
-	UINT32		rsv:6;
-
-	UINT32		MCS:7;
-	UINT32		BW:1;	//channel bandwidth 20MHz or 40 MHz
-	UINT32		ShortGI:1;
-	UINT32		STBC:2;	// 1: STBC support MCS =0-7,   2,3 : RESERVE
-	UINT32		Ifs:1;	//
-//	UINT32		rsv2:2;	//channel bandwidth 20MHz or 40 MHz
-	UINT32		rsv2:1;
-	UINT32		TxBF:1;	// 3*3
-	UINT32		PHYMODE:2;
-	// Word	1
-	UINT32		ACK:1;
-	UINT32		NSEQ:1;
-	UINT32		BAWinSize:6;
-	UINT32		WirelessCliID:8;
-	UINT32		MPDUtotalByteCount:12;
-	UINT32		PacketId:4;
-	//Word2
-	UINT32		IV;
-	//Word3
-	UINT32		EIV;
-}	TXWI_STRUC, *PTXWI_STRUC;
-#endif
-//
-// Rx descriptor format, Rx	Ring
-//
-//
-// RXWI wireless information format, in PBF. invisible in driver.
-//
-#ifdef RT_BIG_ENDIAN
-typedef	struct	PACKED _RXWI_STRUC {
-	// Word 0
-	UINT32		TID:4;
-	UINT32		MPDUtotalByteCount:12;
-	UINT32		UDF:3;
-	UINT32		BSSID:3;
-	UINT32		KeyIndex:2;
-	UINT32		WirelessCliID:8;
-	// Word 1
-	UINT32		PHYMODE:2;              // 1: this RX frame is unicast to me
-	UINT32		rsv:3;
-	UINT32		STBC:2;
-	UINT32		ShortGI:1;
-	UINT32		BW:1;
-	UINT32		MCS:7;
-	UINT32		SEQUENCE:12;
-	UINT32		FRAG:4;
-	// Word 2
-	UINT32		rsv1:8;
-	UINT32		RSSI2:8;
-	UINT32		RSSI1:8;
-	UINT32		RSSI0:8;
-	// Word 3
-	UINT32		rsv2:16;
-	UINT32		SNR1:8;
-	UINT32		SNR0:8;
-}	RXWI_STRUC, *PRXWI_STRUC;
-#else
-typedef	struct	PACKED _RXWI_STRUC {
-	// Word	0
-	UINT32		WirelessCliID:8;
-	UINT32		KeyIndex:2;
-	UINT32		BSSID:3;
-	UINT32		UDF:3;
-	UINT32		MPDUtotalByteCount:12;
-	UINT32		TID:4;
-	// Word	1
-	UINT32		FRAG:4;
-	UINT32		SEQUENCE:12;
-	UINT32		MCS:7;
-	UINT32		BW:1;
-	UINT32		ShortGI:1;
-	UINT32		STBC:2;
-	UINT32		rsv:3;
-	UINT32		PHYMODE:2;              // 1: this RX frame is unicast to me
-	//Word2
-	UINT32		RSSI0:8;
-	UINT32		RSSI1:8;
-	UINT32		RSSI2:8;
-	UINT32		rsv1:8;
-	//Word3
-	UINT32		SNR0:8;
-	UINT32		SNR1:8;
-	UINT32		rsv2:16;
-}	RXWI_STRUC, *PRXWI_STRUC;
-#endif
-
-
-// =================================================================================
-// HOST-MCU communication data structure
-// =================================================================================
-
-//
-// H2M_MAILBOX_CSR: Host-to-MCU Mailbox
-//
-#ifdef RT_BIG_ENDIAN
-typedef union  _H2M_MAILBOX_STRUC {
-    struct {
-        UINT32       Owner:8;
-        UINT32       CmdToken:8;    // 0xff tells MCU not to report CmdDoneInt after excuting the command
-        UINT32       HighByte:8;
-        UINT32       LowByte:8;
-    }   field;
-    UINT32           word;
-} H2M_MAILBOX_STRUC, *PH2M_MAILBOX_STRUC;
-#else
-typedef union  _H2M_MAILBOX_STRUC {
-    struct {
-        UINT32       LowByte:8;
-        UINT32       HighByte:8;
-        UINT32       CmdToken:8;
-        UINT32       Owner:8;
-    }   field;
-    UINT32           word;
-} H2M_MAILBOX_STRUC, *PH2M_MAILBOX_STRUC;
-#endif
-
-//
-// M2H_CMD_DONE_CSR: MCU-to-Host command complete indication
-//
-#ifdef RT_BIG_ENDIAN
-typedef union _M2H_CMD_DONE_STRUC {
-    struct  {
-        UINT32       CmdToken3;
-        UINT32       CmdToken2;
-        UINT32       CmdToken1;
-        UINT32       CmdToken0;
-    } field;
-    UINT32           word;
-} M2H_CMD_DONE_STRUC, *PM2H_CMD_DONE_STRUC;
-#else
-typedef union _M2H_CMD_DONE_STRUC {
-    struct  {
-        UINT32       CmdToken0;
-        UINT32       CmdToken1;
-        UINT32       CmdToken2;
-        UINT32       CmdToken3;
-    } field;
-    UINT32           word;
-} M2H_CMD_DONE_STRUC, *PM2H_CMD_DONE_STRUC;
-#endif
-
-
-
-//
-// MCU_LEDCS: MCU LED Control Setting.
-//
-#ifdef RT_BIG_ENDIAN
-typedef union  _MCU_LEDCS_STRUC {
-	struct	{
-		UCHAR		Polarity:1;
-		UCHAR		LedMode:7;
-	} field;
-	UCHAR				word;
-} MCU_LEDCS_STRUC, *PMCU_LEDCS_STRUC;
-#else
-typedef union  _MCU_LEDCS_STRUC {
-	struct	{
-		UCHAR		LedMode:7;
-		UCHAR		Polarity:1;
-	} field;
-	UCHAR			word;
-} MCU_LEDCS_STRUC, *PMCU_LEDCS_STRUC;
-#endif
-// =================================================================================
-// Register format
-// =================================================================================
-
-
-
-//NAV_TIME_CFG :NAV
-#ifdef RT_BIG_ENDIAN
-typedef	union	_NAV_TIME_CFG_STRUC	{
-	struct	{
-		USHORT		rsv:6;
-		USHORT		ZeroSifs:1;               // Applied zero SIFS timer after OFDM RX 0: disable
-		USHORT		Eifs:9;               // in unit of 1-us
-		UCHAR       SlotTime;    // in unit of 1-us
-		UCHAR		Sifs;               // in unit of 1-us
-	}	field;
-	UINT32			word;
-}	NAV_TIME_CFG_STRUC, *PNAV_TIME_CFG_STRUC;
-#else
-typedef	union	_NAV_TIME_CFG_STRUC	{
-	struct	{
-		UCHAR		Sifs;               // in unit of 1-us
-		UCHAR       SlotTime;    // in unit of 1-us
-		USHORT		Eifs:9;               // in unit of 1-us
-		USHORT		ZeroSifs:1;               // Applied zero SIFS timer after OFDM RX 0: disable
-		USHORT		rsv:6;
-	}	field;
-	UINT32			word;
-}	NAV_TIME_CFG_STRUC, *PNAV_TIME_CFG_STRUC;
-#endif
-
-
-
-
-
-//
-// RX_FILTR_CFG:  /RX configuration register
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	RX_FILTR_CFG_STRUC	{
-	struct	{
-		UINT32		:15;
-		UINT32       DropRsvCntlType:1;
-
-        	UINT32       	DropBAR:1;       //
-		UINT32		DropBA:1;		//
-		UINT32		DropPsPoll:1;		// Drop Ps-Poll
-		UINT32		DropRts:1;		// Drop Ps-Poll
-
-		UINT32		DropCts:1;		// Drop Ps-Poll
-		UINT32		DropAck:1;		// Drop Ps-Poll
-		UINT32		DropCFEnd:1;		// Drop Ps-Poll
-		UINT32		DropCFEndAck:1;		// Drop Ps-Poll
-
-		UINT32		DropDuplicate:1;		// Drop duplicate frame
-		UINT32		DropBcast:1;		// Drop broadcast frames
-		UINT32		DropMcast:1;		// Drop multicast frames
-		UINT32		DropVerErr:1;	    // Drop version error frame
-
-		UINT32		DropNotMyBSSID:1;			// Drop fram ToDs bit is true
-		UINT32		DropNotToMe:1;		// Drop not to me unicast frame
-		UINT32		DropPhyErr:1;		// Drop physical error
-		UINT32		DropCRCErr:1;		// Drop CRC error
-	}	field;
-	UINT32			word;
-}	RX_FILTR_CFG_STRUC, *PRX_FILTR_CFG_STRUC;
-#else
-typedef	union	_RX_FILTR_CFG_STRUC	{
-	struct	{
-		UINT32		DropCRCErr:1;		// Drop CRC error
-		UINT32		DropPhyErr:1;		// Drop physical error
-		UINT32		DropNotToMe:1;		// Drop not to me unicast frame
-		UINT32		DropNotMyBSSID:1;			// Drop fram ToDs bit is true
-
-		UINT32		DropVerErr:1;	    // Drop version error frame
-		UINT32		DropMcast:1;		// Drop multicast frames
-		UINT32		DropBcast:1;		// Drop broadcast frames
-		UINT32		DropDuplicate:1;		// Drop duplicate frame
-
-		UINT32		DropCFEndAck:1;		// Drop Ps-Poll
-		UINT32		DropCFEnd:1;		// Drop Ps-Poll
-		UINT32		DropAck:1;		// Drop Ps-Poll
-		UINT32		DropCts:1;		// Drop Ps-Poll
-
-		UINT32		DropRts:1;		// Drop Ps-Poll
-		UINT32		DropPsPoll:1;		// Drop Ps-Poll
-		UINT32		DropBA:1;		//
-        	UINT32       	DropBAR:1;       //
-
-		UINT32       	DropRsvCntlType:1;
-		UINT32		:15;
-	}	field;
-	UINT32			word;
-}	RX_FILTR_CFG_STRUC, *PRX_FILTR_CFG_STRUC;
-#endif
-
-
-
-
-//
-// PHY_CSR4: RF serial control register
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_PHY_CSR4_STRUC	{
-	struct	{
-		UINT32		Busy:1;				// 1: ASIC is busy execute RF programming.
-		UINT32		PLL_LD:1;			// RF PLL_LD status
-		UINT32		IFSelect:1;			// 1: select IF	to program,	0: select RF to	program
-		UINT32		NumberOfBits:5;		// Number of bits used in RFRegValue (I:20,	RFMD:22)
-		UINT32		RFRegValue:24;		// Register	value (include register	id)	serial out to RF/IF	chip.
-	}	field;
-	UINT32			word;
-}	PHY_CSR4_STRUC, *PPHY_CSR4_STRUC;
-#else
-typedef	union	_PHY_CSR4_STRUC	{
-	struct	{
-		UINT32		RFRegValue:24;		// Register	value (include register	id)	serial out to RF/IF	chip.
-		UINT32		NumberOfBits:5;		// Number of bits used in RFRegValue (I:20,	RFMD:22)
-		UINT32		IFSelect:1;			// 1: select IF	to program,	0: select RF to	program
-		UINT32		PLL_LD:1;			// RF PLL_LD status
-		UINT32		Busy:1;				// 1: ASIC is busy execute RF programming.
-	}	field;
-	UINT32			word;
-}	PHY_CSR4_STRUC, *PPHY_CSR4_STRUC;
-#endif
-
-
-//
-// SEC_CSR5: shared key table security mode register
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_SEC_CSR5_STRUC	{
-	struct	{
-        UINT32       :1;
-        UINT32       Bss3Key3CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss3Key2CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss3Key1CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss3Key0CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss2Key3CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss2Key2CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss2Key1CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss2Key0CipherAlg:3;
-	}	field;
-	UINT32			word;
-}	SEC_CSR5_STRUC, *PSEC_CSR5_STRUC;
-#else
-typedef	union	_SEC_CSR5_STRUC	{
-	struct	{
-        UINT32       Bss2Key0CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss2Key1CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss2Key2CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss2Key3CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss3Key0CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss3Key1CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss3Key2CipherAlg:3;
-        UINT32       :1;
-        UINT32       Bss3Key3CipherAlg:3;
-        UINT32       :1;
-	}	field;
-	UINT32			word;
-}	SEC_CSR5_STRUC, *PSEC_CSR5_STRUC;
-#endif
-
-
-//
-// HOST_CMD_CSR: For HOST to interrupt embedded processor
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_HOST_CMD_CSR_STRUC	{
-	struct	{
-	    UINT32   Rsv:24;
-	    UINT32   HostCommand:8;
-	}	field;
-	UINT32			word;
-}	HOST_CMD_CSR_STRUC, *PHOST_CMD_CSR_STRUC;
-#else
-typedef	union	_HOST_CMD_CSR_STRUC	{
-	struct	{
-	    UINT32   HostCommand:8;
-	    UINT32   Rsv:24;
-	}	field;
-	UINT32			word;
-}	HOST_CMD_CSR_STRUC, *PHOST_CMD_CSR_STRUC;
-#endif
-
-
-//
-// AIFSN_CSR: AIFSN for each EDCA AC
-//
-
-
-
-//
-// E2PROM_CSR: EEPROM control register
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_E2PROM_CSR_STRUC	{
-	struct	{
-		UINT32		Rsvd:25;
-		UINT32       LoadStatus:1;   // 1:loading, 0:done
-		UINT32		Type:1;			// 1: 93C46, 0:93C66
-		UINT32		EepromDO:1;
-		UINT32		EepromDI:1;
-		UINT32		EepromCS:1;
-		UINT32		EepromSK:1;
-		UINT32		Reload:1;		// Reload EEPROM content, write one to reload, self-cleared.
-	}	field;
-	UINT32			word;
-}	E2PROM_CSR_STRUC, *PE2PROM_CSR_STRUC;
-#else
-typedef	union	_E2PROM_CSR_STRUC	{
-	struct	{
-		UINT32		Reload:1;		// Reload EEPROM content, write one to reload, self-cleared.
-		UINT32		EepromSK:1;
-		UINT32		EepromCS:1;
-		UINT32		EepromDI:1;
-		UINT32		EepromDO:1;
-		UINT32		Type:1;			// 1: 93C46, 0:93C66
-		UINT32       LoadStatus:1;   // 1:loading, 0:done
-		UINT32		Rsvd:25;
-	}	field;
-	UINT32			word;
-}	E2PROM_CSR_STRUC, *PE2PROM_CSR_STRUC;
-#endif
-
-
-// -------------------------------------------------------------------
-//  E2PROM data layout
-// -------------------------------------------------------------------
-
-//
-// EEPROM antenna select format
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_EEPROM_ANTENNA_STRUC	{
-	struct	{
-		USHORT      Rsv:4;
-		USHORT      RfIcType:4;             // see E2PROM document
-		USHORT		TxPath:4;	// 1: 1T, 2: 2T
-		USHORT		RxPath:4;	// 1: 1R, 2: 2R, 3: 3R
-	}	field;
-	USHORT			word;
-}	EEPROM_ANTENNA_STRUC, *PEEPROM_ANTENNA_STRUC;
-#else
-typedef	union	_EEPROM_ANTENNA_STRUC	{
-	struct	{
-		USHORT		RxPath:4;	// 1: 1R, 2: 2R, 3: 3R
-		USHORT		TxPath:4;	// 1: 1T, 2: 2T
-		USHORT      RfIcType:4;             // see E2PROM document
-		USHORT      Rsv:4;
-	}	field;
-	USHORT			word;
-}	EEPROM_ANTENNA_STRUC, *PEEPROM_ANTENNA_STRUC;
-#endif
-
-#ifdef RT_BIG_ENDIAN
-typedef	union _EEPROM_NIC_CINFIG2_STRUC	{
-	struct	{
-        USHORT		DACTestBit:1;			// control if driver should patch the DAC issue
-		USHORT		Rsv2:3;					// must be 0
-        USHORT		AntDiversity:1;			// Antenna diversity
-		USHORT		Rsv1:1;					// must be 0
-		USHORT		BW40MAvailForA:1;			// 0:enable, 1:disable
-		USHORT		BW40MAvailForG:1;			// 0:enable, 1:disable
-		USHORT		EnableWPSPBC:1;                 // WPS PBC Control bit
-		USHORT		BW40MSidebandForA:1;
-		USHORT		BW40MSidebandForG:1;
-		USHORT		CardbusAcceleration:1;	// !!! NOTE: 0 - enable, 1 - disable
-		USHORT		ExternalLNAForA:1;			// external LNA enable for 5G
-		USHORT		ExternalLNAForG:1;			// external LNA enable for 2.4G
-		USHORT		DynamicTxAgcControl:1;			//
-		USHORT		HardwareRadioControl:1;	// Whether RF is controlled by driver or HW. 1:enable hw control, 0:disable
-	}	field;
-	USHORT			word;
-}	EEPROM_NIC_CONFIG2_STRUC, *PEEPROM_NIC_CONFIG2_STRUC;
-#else
-typedef	union _EEPROM_NIC_CINFIG2_STRUC	{
-	struct {
-		USHORT		HardwareRadioControl:1;	// 1:enable, 0:disable
-		USHORT		DynamicTxAgcControl:1;			//
-		USHORT		ExternalLNAForG:1;				//
-		USHORT		ExternalLNAForA:1;			// external LNA enable for 2.4G
-		USHORT		CardbusAcceleration:1;	// !!! NOTE: 0 - enable, 1 - disable
-		USHORT		BW40MSidebandForG:1;
-		USHORT		BW40MSidebandForA:1;
-		USHORT		EnableWPSPBC:1;                 // WPS PBC Control bit
-		USHORT		BW40MAvailForG:1;			// 0:enable, 1:disable
-		USHORT		BW40MAvailForA:1;			// 0:enable, 1:disable
-		USHORT		Rsv1:1;					// must be 0
-		USHORT		AntDiversity:1;			// Antenna diversity
-		USHORT		Rsv2:3;					// must be 0
-		USHORT		DACTestBit:1;			// control if driver should patch the DAC issue
-	}	field;
-	USHORT			word;
-}	EEPROM_NIC_CONFIG2_STRUC, *PEEPROM_NIC_CONFIG2_STRUC;
-#endif
-
-//
-// TX_PWR Value valid range 0xFA(-6) ~ 0x24(36)
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_EEPROM_TX_PWR_STRUC	{
-	struct	{
-		CHAR	Byte1;				// High Byte
-		CHAR	Byte0;				// Low Byte
-	}	field;
-	USHORT	word;
-}	EEPROM_TX_PWR_STRUC, *PEEPROM_TX_PWR_STRUC;
-#else
-typedef	union	_EEPROM_TX_PWR_STRUC	{
-	struct	{
-		CHAR	Byte0;				// Low Byte
-		CHAR	Byte1;				// High Byte
-	}	field;
-	USHORT	word;
-}	EEPROM_TX_PWR_STRUC, *PEEPROM_TX_PWR_STRUC;
-#endif
-
-#ifdef RT_BIG_ENDIAN
-typedef	union	_EEPROM_VERSION_STRUC	{
-	struct	{
-		UCHAR	Version;			// High Byte
-		UCHAR	FaeReleaseNumber;	// Low Byte
-	}	field;
-	USHORT	word;
-}	EEPROM_VERSION_STRUC, *PEEPROM_VERSION_STRUC;
-#else
-typedef	union	_EEPROM_VERSION_STRUC	{
-	struct	{
-		UCHAR	FaeReleaseNumber;	// Low Byte
-		UCHAR	Version;			// High Byte
-	}	field;
-	USHORT	word;
-}	EEPROM_VERSION_STRUC, *PEEPROM_VERSION_STRUC;
-#endif
-
-#ifdef RT_BIG_ENDIAN
-typedef	union	_EEPROM_LED_STRUC	{
-	struct	{
-		USHORT	Rsvd:3;				// Reserved
-		USHORT	LedMode:5;			// Led mode.
-		USHORT	PolarityGPIO_4:1;	// Polarity GPIO#4 setting.
-		USHORT	PolarityGPIO_3:1;	// Polarity GPIO#3 setting.
-		USHORT	PolarityGPIO_2:1;	// Polarity GPIO#2 setting.
-		USHORT	PolarityGPIO_1:1;	// Polarity GPIO#1 setting.
-		USHORT	PolarityGPIO_0:1;	// Polarity GPIO#0 setting.
-		USHORT	PolarityACT:1;		// Polarity ACT setting.
-		USHORT	PolarityRDY_A:1;		// Polarity RDY_A setting.
-		USHORT	PolarityRDY_G:1;		// Polarity RDY_G setting.
-	}	field;
-	USHORT	word;
-}	EEPROM_LED_STRUC, *PEEPROM_LED_STRUC;
-#else
-typedef	union	_EEPROM_LED_STRUC	{
-	struct	{
-		USHORT	PolarityRDY_G:1;		// Polarity RDY_G setting.
-		USHORT	PolarityRDY_A:1;		// Polarity RDY_A setting.
-		USHORT	PolarityACT:1;		// Polarity ACT setting.
-		USHORT	PolarityGPIO_0:1;	// Polarity GPIO#0 setting.
-		USHORT	PolarityGPIO_1:1;	// Polarity GPIO#1 setting.
-		USHORT	PolarityGPIO_2:1;	// Polarity GPIO#2 setting.
-		USHORT	PolarityGPIO_3:1;	// Polarity GPIO#3 setting.
-		USHORT	PolarityGPIO_4:1;	// Polarity GPIO#4 setting.
-		USHORT	LedMode:5;			// Led mode.
-		USHORT	Rsvd:3;				// Reserved
-	}	field;
-	USHORT	word;
-}	EEPROM_LED_STRUC, *PEEPROM_LED_STRUC;
-#endif
-
-#ifdef RT_BIG_ENDIAN
-typedef	union	_EEPROM_TXPOWER_DELTA_STRUC	{
-	struct	{
-		UCHAR	TxPowerEnable:1;// Enable
-		UCHAR	Type:1;			// 1: plus the delta value, 0: minus the delta value
-		UCHAR	DeltaValue:6;	// Tx Power dalta value (MAX=4)
-	}	field;
-	UCHAR	value;
-}	EEPROM_TXPOWER_DELTA_STRUC, *PEEPROM_TXPOWER_DELTA_STRUC;
-#else
-typedef	union	_EEPROM_TXPOWER_DELTA_STRUC	{
-	struct	{
-		UCHAR	DeltaValue:6;	// Tx Power dalta value (MAX=4)
-		UCHAR	Type:1;			// 1: plus the delta value, 0: minus the delta value
-		UCHAR	TxPowerEnable:1;// Enable
-	}	field;
-	UCHAR	value;
-}	EEPROM_TXPOWER_DELTA_STRUC, *PEEPROM_TXPOWER_DELTA_STRUC;
-#endif
-
-//
-// QOS_CSR0: TXOP holder address0 register
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_QOS_CSR0_STRUC	{
-	struct	{
-		UCHAR		Byte3;		// MAC address byte 3
-		UCHAR		Byte2;		// MAC address byte 2
-		UCHAR		Byte1;		// MAC address byte 1
-		UCHAR		Byte0;		// MAC address byte 0
-	}	field;
-	UINT32			word;
-}	QOS_CSR0_STRUC, *PQOS_CSR0_STRUC;
-#else
-typedef	union	_QOS_CSR0_STRUC	{
-	struct	{
-		UCHAR		Byte0;		// MAC address byte 0
-		UCHAR		Byte1;		// MAC address byte 1
-		UCHAR		Byte2;		// MAC address byte 2
-		UCHAR		Byte3;		// MAC address byte 3
-	}	field;
-	UINT32			word;
-}	QOS_CSR0_STRUC, *PQOS_CSR0_STRUC;
-#endif
-
-//
-// QOS_CSR1: TXOP holder address1 register
-//
-#ifdef RT_BIG_ENDIAN
-typedef	union	_QOS_CSR1_STRUC	{
-	struct	{
-		UCHAR		Rsvd1;
-		UCHAR		Rsvd0;
-		UCHAR		Byte5;		// MAC address byte 5
-		UCHAR		Byte4;		// MAC address byte 4
-	}	field;
-	UINT32			word;
-}	QOS_CSR1_STRUC, *PQOS_CSR1_STRUC;
-#else
-typedef	union	_QOS_CSR1_STRUC	{
-	struct	{
-		UCHAR		Byte4;		// MAC address byte 4
-		UCHAR		Byte5;		// MAC address byte 5
-		UCHAR		Rsvd0;
-		UCHAR		Rsvd1;
-	}	field;
-	UINT32			word;
-}	QOS_CSR1_STRUC, *PQOS_CSR1_STRUC;
-#endif
-
-#define	RF_CSR_CFG	0x500
-#ifdef RT_BIG_ENDIAN
-typedef	union	_RF_CSR_CFG_STRUC	{
-	struct	{
-		UINT	Rsvd1:14;				// Reserved
-		UINT	RF_CSR_KICK:1;			// kick RF register read/write
-		UINT	RF_CSR_WR:1;			// 0: read  1: write
-		UINT	Rsvd2:3;				// Reserved
-		UINT	TESTCSR_RFACC_REGNUM:5;	// RF register ID
-		UINT	RF_CSR_DATA:8;			// DATA
-	}	field;
-	UINT	word;
-}	RF_CSR_CFG_STRUC, *PRF_CSR_CFG_STRUC;
-#else
-typedef	union	_RF_CSR_CFG_STRUC	{
-	struct	{
-		UINT	RF_CSR_DATA:8;			// DATA
-		UINT	TESTCSR_RFACC_REGNUM:5;	// RF register ID
-		UINT	Rsvd2:3;				// Reserved
-		UINT	RF_CSR_WR:1;			// 0: read  1: write
-		UINT	RF_CSR_KICK:1;			// kick RF register read/write
-		UINT	Rsvd1:14;				// Reserved
-	}	field;
-	UINT	word;
-}	RF_CSR_CFG_STRUC, *PRF_CSR_CFG_STRUC;
-#endif
-
-#endif	// __RT28XX_H__
+#include "../rt2870/rt28xx.h"
diff --git a/drivers/staging/rt3070/rt_ate.c b/drivers/staging/rt3070/rt_ate.c
deleted file mode 100644
index 9238d960121..00000000000
--- a/drivers/staging/rt3070/rt_ate.c
+++ /dev/null
@@ -1,6506 +0,0 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-#include "rt_config.h"
-
-#ifdef UCOS
-INT IoctlResponse(PUCHAR payload, PUCHAR msg, INT len);
-#endif // UCOS //
-
-#define ATE_BBP_REG_NUM	168
-UCHAR restore_BBP[ATE_BBP_REG_NUM]={0};
-
-#ifdef RALINK_ATE
-UCHAR TemplateFrame[24] = {0x08/* Data type */,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0xAA,0xBB,0x12,0x34,0x56,0x00,0x11,0x22,0xAA,0xBB,0xCC,0x00,0x00};	// 802.11 MAC Header, Type:Data, Length:24bytes
-extern RTMP_RF_REGS RF2850RegTable[];
-extern UCHAR NUM_OF_2850_CHNL;
-
-#ifdef RT2870
-extern UCHAR EpToQueue[];
-extern VOID	RTUSBRejectPendingPackets(	IN	PRTMP_ADAPTER	pAd);
-#endif // RT2870 //
-
-#ifdef RT30xx
-//2008/07/10:KH adds to support 3070 ATE<--
-extern FREQUENCY_ITEM FreqItems3020[];
-extern UCHAR NUM_OF_3020_CHNL;
-//2008/07/10:KH adds to support 3070 ATE-->
-#endif // RT30xx //
-
-#ifdef UCOS
-extern INT ConsoleResponse(IN PUCHAR buff);
-extern int (*remote_display)(char *);
-#endif // UCOS //
-
-static CHAR CCKRateTable[] = {0, 1, 2, 3, 8, 9, 10, 11, -1}; /* CCK Mode. */
-static CHAR OFDMRateTable[] = {0, 1, 2, 3, 4, 5, 6, 7, -1}; /* OFDM Mode. */
-static CHAR HTMIXRateTable[] = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1}; /* HT Mix Mode. */
-
-static INT TxDmaBusy(
-	IN PRTMP_ADAPTER pAd);
-
-static INT RxDmaBusy(
-	IN PRTMP_ADAPTER pAd);
-
-static VOID RtmpDmaEnable(
-	IN PRTMP_ADAPTER pAd,
-	IN INT Enable);
-
-static VOID BbpSoftReset(
-	IN PRTMP_ADAPTER pAd);
-
-static VOID RtmpRfIoWrite(
-	IN PRTMP_ADAPTER pAd);
-
-static INT ATESetUpFrame(
-	IN PRTMP_ADAPTER pAd,
-	IN UINT32 TxIdx);
-
-static INT ATETxPwrHandler(
-	IN PRTMP_ADAPTER pAd,
-	IN char index);
-
-static INT ATECmdHandler(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-static int CheckMCSValid(
-	IN UCHAR Mode,
-	IN UCHAR Mcs);
-
-
-#ifdef RT2870
-static VOID ATEWriteTxInfo(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PTXINFO_STRUC 	pTxInfo,
-	IN	  USHORT		USBDMApktLen,
-	IN	  BOOLEAN		bWiv,
-	IN	  UCHAR			QueueSel,
-	IN	  UCHAR			NextValid,
-	IN	  UCHAR			TxBurst);
-
-static VOID ATEWriteTxWI(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PTXWI_STRUC 	pTxWI,
-	IN	BOOLEAN			FRAG,
-	IN	BOOLEAN			InsTimestamp,
-	IN	BOOLEAN 		AMPDU,
-	IN	BOOLEAN 		Ack,
-	IN	BOOLEAN 		NSeq,		// HW new a sequence.
-	IN	UCHAR			BASize,
-	IN	UCHAR			WCID,
-	IN	ULONG			Length,
-	IN	UCHAR 			PID,
-	IN	UCHAR			MIMOps,
-	IN	UCHAR			Txopmode,
-	IN	BOOLEAN			CfAck,
-	IN	HTTRANSMIT_SETTING	Transmit);
-
-#endif // RT2870 //
-
-static VOID SetJapanFilter(
-	IN	PRTMP_ADAPTER	pAd);
-
-/*=========================end of prototype=========================*/
-
-
-#ifdef RT2870
-static INT TxDmaBusy(
-	IN PRTMP_ADAPTER pAd)
-{
-	INT result;
-	USB_DMA_CFG_STRUC UsbCfg;
-
-	RTMP_IO_READ32(pAd, USB_DMA_CFG, &UsbCfg.word);	// disable DMA
-	if (UsbCfg.field.TxBusy)
-		result = 1;
-	else
-		result = 0;
-
-	return result;
-}
-
-static INT RxDmaBusy(
-	IN PRTMP_ADAPTER pAd)
-{
-	INT result;
-	USB_DMA_CFG_STRUC UsbCfg;
-
-	RTMP_IO_READ32(pAd, USB_DMA_CFG, &UsbCfg.word);	// disable DMA
-	if (UsbCfg.field.RxBusy)
-		result = 1;
-	else
-		result = 0;
-
-	return result;
-}
-
-static VOID RtmpDmaEnable(
-	IN PRTMP_ADAPTER pAd,
-	IN INT Enable)
-{
-	BOOLEAN value;
-	ULONG WaitCnt;
-	USB_DMA_CFG_STRUC UsbCfg;
-
-	value = Enable > 0 ? 1 : 0;
-
-	// check DMA is in busy mode.
-	WaitCnt = 0;
-	while (TxDmaBusy(pAd) || RxDmaBusy(pAd))
-	{
-		RTMPusecDelay(10);
-		if (WaitCnt++ > 100)
-			break;
-	}
-
-	//Why not to clear USB DMA TX path first ???
-	RTMP_IO_READ32(pAd, USB_DMA_CFG, &UsbCfg.word);	// disable DMA
-	UsbCfg.field.TxBulkEn = value;
-	UsbCfg.field.RxBulkEn = value;
-	RTMP_IO_WRITE32(pAd, USB_DMA_CFG, UsbCfg.word);	// abort all TX rings
-	RTMPusecDelay(5000);
-
-	return;
-}
-#endif // RT2870 //
-
-static VOID BbpSoftReset(
-	IN PRTMP_ADAPTER pAd)
-{
-	UCHAR BbpData = 0;
-
-	// Soft reset, set BBP R21 bit0=1->0
-	ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R21, &BbpData);
-	BbpData |= 0x00000001; //set bit0=1
-	ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R21, BbpData);
-
-	ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R21, &BbpData);
-	BbpData &= ~(0x00000001); //set bit0=0
-	ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R21, BbpData);
-
-	return;
-}
-
-static VOID RtmpRfIoWrite(
-	IN PRTMP_ADAPTER pAd)
-{
-	// Set RF value 1's set R3[bit2] = [0]
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1);
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2);
-	RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 & (~0x04)));
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4);
-
-	RTMPusecDelay(200);
-
-	// Set RF value 2's set R3[bit2] = [1]
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1);
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2);
-	RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 | 0x04));
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4);
-
-	RTMPusecDelay(200);
-
-	// Set RF value 3's set R3[bit2] = [0]
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1);
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2);
-	RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 & (~0x04)));
-	RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4);
-
-	return;
-}
-
-static int CheckMCSValid(
-	UCHAR Mode,
-	UCHAR Mcs)
-{
-	int i;
-	PCHAR pRateTab;
-
-	switch(Mode)
-	{
-		case 0:
-			pRateTab = CCKRateTable;
-			break;
-		case 1:
-			pRateTab = OFDMRateTable;
-			break;
-		case 2:
-		case 3:
-			pRateTab = HTMIXRateTable;
-			break;
-		default:
-			ATEDBGPRINT(RT_DEBUG_ERROR, ("unrecognizable Tx Mode %d\n", Mode));
-			return -1;
-			break;
-	}
-
-	i = 0;
-	while(pRateTab[i] != -1)
-	{
-		if (pRateTab[i] == Mcs)
-			return 0;
-		i++;
-	}
-
-	return -1;
-}
-
-#if 1
-static INT ATETxPwrHandler(
-	IN PRTMP_ADAPTER pAd,
-	IN char index)
-{
-	ULONG R;
-	CHAR TxPower;
-	UCHAR Bbp94 = 0;
-	BOOLEAN bPowerReduce = FALSE;
-#ifdef RT30xx
-	UCHAR RFValue;
-#endif // RT30xx //
-#ifdef RALINK_28xx_QA
-	if ((pAd->ate.bQATxStart == TRUE) || (pAd->ate.bQARxStart == TRUE))
-	{
-		/* When QA is used for Tx, pAd->ate.TxPower0/1 and real tx power
-		** are not synchronized.
-		*/
-/*
-		pAd->ate.TxPower0 = pAd->LatchRfRegs.xxx;
-		pAd->ate.TxPower1 = pAd->LatchRfRegs.xxx;
-*/
-		return 0;
-	}
-	else
-#endif // RALINK_28xx_QA //
-	{
-		TxPower = index == 0 ? pAd->ate.TxPower0 : pAd->ate.TxPower1;
-
-		if (pAd->ate.Channel <= 14)
-		{
-			if (TxPower > 31)
-			{
-				//
-				// R3, R4 can't large than 31 (0x24), 31 ~ 36 used by BBP 94
-				//
-				R = 31;
-				if (TxPower <= 36)
-					Bbp94 = BBPR94_DEFAULT + (UCHAR)(TxPower - 31);
-			}
-			else if (TxPower < 0)
-			{
-				//
-				// R3, R4 can't less than 0, -1 ~ -6 used by BBP 94
-				//
-				R = 0;
-				if (TxPower >= -6)
-					Bbp94 = BBPR94_DEFAULT + TxPower;
-			}
-			else
-			{
-				// 0 ~ 31
-				R = (ULONG) TxPower;
-				Bbp94 = BBPR94_DEFAULT;
-			}
-
-			ATEDBGPRINT(RT_DEBUG_TRACE, ("%s (TxPower=%d, R=%ld, BBP_R94=%d)\n", __FUNCTION__, TxPower, R, Bbp94));
-		}
-		else// 5.5 GHz
-		{
-			if (TxPower > 15)
-			{
-				//
-				// R3, R4 can't large than 15 (0x0F)
-				//
-				R = 15;
-			}
-			else if (TxPower < 0)
-			{
-				//
-				// R3, R4 can't less than 0
-				//
-				// -1 ~ -7
-				ASSERT((TxPower >= -7));
-				R = (ULONG)(TxPower + 7);
-				bPowerReduce = TRUE;
-			}
-			else
-			{
-				// 0 ~ 15
-				R = (ULONG) TxPower;
-			}
-
-			ATEDBGPRINT(RT_DEBUG_TRACE, ("%s (TxPower=%d, R=%lu)\n", __FUNCTION__, TxPower, R));
-		}
-//2008/09/10:KH adds to support 3070 ATE TX Power tunning real time<--
-#ifdef RT30xx
-		if(IS_RT30xx(pAd))
-		{
-			// Set Tx Power
-
-					RT30xxReadRFRegister(pAd, RF_R12, (PUCHAR)&RFValue);
-					RFValue = (RFValue & 0xE0) | TxPower;
-					RT30xxWriteRFRegister(pAd, RF_R12, (UCHAR)RFValue);
-					ATEDBGPRINT(RT_DEBUG_TRACE, ("3070 or 2070:%s (TxPower=%d, RFValue=%x)\n", __FUNCTION__, TxPower, RFValue));
-
-		}
-		else
-#endif // RT30xx //
-	      {
-		if (pAd->ate.Channel <= 14)
-		{
-			if (index == 0)
-			{
-				R = R << 9;		// shift TX power control to correct RF(R3) register bit position
-				R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
-				pAd->LatchRfRegs.R3 = R;
-			}
-			else
-			{
-				R = R << 6;		// shift TX power control to correct RF(R4) register bit position
-				R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
-				pAd->LatchRfRegs.R4 = R;
-			}
-		}
-		else// 5.5GHz
-		{
-			if (bPowerReduce == FALSE)
-			{
-				if (index == 0)
-				{
-					R = (R << 10) | (1 << 9);		// shift TX power control to correct RF(R3) register bit position
-					R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
-					pAd->LatchRfRegs.R3 = R;
-				}
-				else
-				{
-					R = (R << 7) | (1 << 6);		// shift TX power control to correct RF(R4) register bit position
-					R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
-					pAd->LatchRfRegs.R4 = R;
-				}
-			}
-			else
-			{
-				if (index == 0)
-				{
-					R = (R << 10);		// shift TX power control to correct RF(R3) register bit position
-					R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
-
-					/* Clear bit 9 of R3 to reduce 7dB. */
-					pAd->LatchRfRegs.R3 = (R & (~(1 << 9)));
-				}
-				else
-				{
-					R = (R << 7);		// shift TX power control to correct RF(R4) register bit position
-					R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
-
-					/* Clear bit 6 of R4 to reduce 7dB. */
-					pAd->LatchRfRegs.R4 = (R & (~(1 << 6)));
-				}
-			}
-		}
-		RtmpRfIoWrite(pAd);
-           }
-//2008/09/10:KH adds to support 3070 ATE TX Power tunning real time-->
-
-		return 0;
-	}
-}
-#else// 1 //
-static INT ATETxPwrHandler(
-	IN PRTMP_ADAPTER pAd,
-	IN char index)
-{
-	ULONG R;
-	CHAR TxPower;
-	UCHAR Bbp94 = 0;
-
-#ifdef RALINK_28xx_QA
-	if ((pAd->ate.bQATxStart == TRUE) || (pAd->ate.bQARxStart == TRUE))
-	{
-		// TODO: how to get current TxPower0/1 from pAd->LatchRfRegs ?
-		/* When QA is used for Tx, pAd->ate.TxPower0/1 and real tx power
-		** are not synchronized.
-		*/
-/*
-		pAd->ate.TxPower0 = pAd->LatchRfRegs.xxx;
-		pAd->ate.TxPower1 = pAd->LatchRfRegs.xxx;
-*/
-		return 0;
-	}
-	else
-#endif // RALINK_28xx_QA //
-	{
-		TxPower = index == 0 ? pAd->ate.TxPower0 : pAd->ate.TxPower1;
-
-	if (TxPower > 31)
-	{
-		//
-		// R3, R4 can't large than 36 (0x24), 31 ~ 36 used by BBP 94
-		//
-		R = 31;
-		if (TxPower <= 36)
-			Bbp94 = BBPR94_DEFAULT + (UCHAR)(TxPower - 31);
-	}
-	else if (TxPower < 0)
-	{
-		//
-		// R3, R4 can't less than 0, -1 ~ -6 used by BBP 94
-		//
-		R = 0;
-		if (TxPower >= -6)
-			Bbp94 = BBPR94_DEFAULT + TxPower;
-	}
-	else
-	{
-		// 0 ~ 31
-		R = (ULONG) TxPower;
-		Bbp94 = BBPR94_DEFAULT;
-	}
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("%s (TxPower=%d, R3=%ld, BBP_R94=%d)\n", __FUNCTION__, TxPower, R, Bbp94));
-
-		if (pAd->ate.Channel <= 14)
-		{
-	if (index == 0)
-	{
-		R = R << 9;		// shift TX power control to correct RF(R3) register bit position
-		R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
-		pAd->LatchRfRegs.R3 = R;
-	}
-	else
-	{
-		R = R << 6;		// shift TX power control to correct RF(R4) register bit position
-		R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
-		pAd->LatchRfRegs.R4 = R;
-	}
-		}
-		else
-		{
-			if (index == 0)
-			{
-				R = (R << 10) | (1 << 9);		// shift TX power control to correct RF(R3) register bit position
-				R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
-				pAd->LatchRfRegs.R3 = R;
-			}
-			else
-			{
-				R = (R << 7) | (1 << 6);		// shift TX power control to correct RF(R4) register bit position
-				R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
-				pAd->LatchRfRegs.R4 = R;
-			}
-		}
-
-	RtmpRfIoWrite(pAd);
-
-	return 0;
-	}
-}
-#endif // 1 //
-/*
-    ==========================================================================
-    Description:
-        Set ATE operation mode to
-        0. ATESTART  = Start ATE Mode
-        1. ATESTOP   = Stop ATE Mode
-        2. TXCONT    = Continuous Transmit
-        3. TXCARR    = Transmit Carrier
-        4. TXFRAME   = Transmit Frames
-        5. RXFRAME   = Receive Frames
-#ifdef RALINK_28xx_QA
-        6. TXSTOP    = Stop Any Type of Transmition
-        7. RXSTOP    = Stop Receiving Frames
-#endif // RALINK_28xx_QA //
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-/*                                                           */
-/*                                                           */
-/*=======================End of RT2860=======================*/
-
-
-/*======================Start of RT2870======================*/
-/*                                                           */
-/*                                                           */
-
-#ifdef RT2870
-static INT	ATECmdHandler(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UINT32			Value;
-	UCHAR			BbpData;
-	UINT32          MacData;
-	UINT			i=0, atemode;
-	//NDIS_STATUS		Status = NDIS_STATUS_SUCCESS;
-	//PUCHAR			pDest;
-	UINT32 			temp;
-	ULONG			IrqFlags;
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("===> ATECmdHandler()\n"));
-	ATEAsicSwitchChannel(pAd);
-	/* AsicLockChannel() is empty function so far in fact */
-	AsicLockChannel(pAd, pAd->ate.Channel);
-
-	RTMPusecDelay(5000);
-
-	// Default value in BBP R22 is 0x0.
-	BbpData = 0;
-
-	/* Enter ATE mode and set Tx/Rx Idle */
-	if (!strcmp(arg, "ATESTART"))
-	{
-#ifdef CONFIG_STA_SUPPORT
-		BOOLEAN       Cancelled;
-#endif // CONFIG_STA_SUPPORT //
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: ATESTART\n"));
-
-		netif_stop_queue(pAd->net_dev);
-
-		atemode = pAd->ate.Mode;
-		pAd->ate.Mode = ATE_START;
-//		pAd->ate.TxDoneCount = pAd->ate.TxCount;
-		// Disable Rx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// Disable auto responder
-		RTMP_IO_READ32(pAd, AUTO_RSP_CFG, &temp);
-		temp = temp & 0xFFFFFFFE;
-		RTMP_IO_WRITE32(pAd, AUTO_RSP_CFG, temp);
-
-		// read MAC_SYS_CTRL and backup MAC_SYS_CTRL value.
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
-		// clean bit4 to stop continuous Tx production test.
-		MacData &= 0xFFFFFFEF;
-		// Stop continuous TX production test.
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);//disable or cancel pending irp first ???
-
-        if (atemode & ATE_TXCARR
-#ifdef RT30xx
- || atemode & ATE_TXCONT
-#endif // RT30xx //
-)
-		{
-#ifdef RT30xx
-			//Hardware Reset BBP
-			RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &temp);
-			temp = temp |0x00000002;
-			RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, temp);
-			RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &temp);
-			temp = temp & ~(0x00000002);
-			RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, temp);
-			//Restore All BBP Value
-			for(i=0;i<ATE_BBP_REG_NUM;i++)
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd,i,restore_BBP[i]);
-#endif // RT30xx //
-
-			// No Carrier Test set BBP R22 bit7=0, bit6=0, bit[5~0]=0x0
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-			BbpData &= 0xFFFFFF00; //clear bit7, bit6, bit[5~0]
-		    ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-		}
-		else if (atemode & ATE_TXCARRSUPP)
-		{
-#ifdef RT30xx
-			//Hardware Reset BBP
-			RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &temp);
-			temp = temp |0x00000002;
-			RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, temp);
-			RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &temp);
-			temp = temp & ~(0x00000002);
-			RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, temp);
-			//Restore All BBP Value
-			for(i=0;i<ATE_BBP_REG_NUM;i++)
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd,i,restore_BBP[i]);
-#endif // RT30xx //
-
-			// No Cont. TX set BBP R22 bit7=0
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-			BbpData &= ~(1 << 7); //set bit7=0
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-
-			// No Carrier Suppression set BBP R24 bit0=0
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R24, &BbpData);
-			BbpData &= 0xFFFFFFFE; //clear bit0
-		    ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, BbpData);
-		}
-		// We should free some resource which allocate when ATE_TXFRAME , ATE_STOP, and ATE_TXCONT.
-		// TODO:Should we free some resource which was allocated when LoopBack and ATE_STOP ?
-		else if ((atemode & ATE_TXFRAME) || (atemode == ATE_STOP))
-		{
-			if (atemode & ATE_TXCONT)
-			{
-				// Not Cont. TX anymore, so set BBP R22 bit7=0
-				ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-				BbpData &= ~(1 << 7); //set bit7=0
-				ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-			}
-			// Abort Tx, Rx DMA.
-			RtmpDmaEnable(pAd, 0);
-
-			{
-				// It seems nothing to free,
-				// because we didn't allocate any resource when we entered ATE_TXFRAME mode latestly.
-			}
-
-			// Start Tx, RX DMA
-			RtmpDmaEnable(pAd, 1);
-		}
-
-		RTUSBRejectPendingPackets(pAd);
-		RTUSBCleanUpDataBulkOutQueue(pAd);
-
-#ifdef CONFIG_STA_SUPPORT
-		//
-		// It will be called in MlmeSuspend().
-		//
-		// Cancel pending timers
-		RTMPCancelTimer(&pAd->MlmeAux.AssocTimer,     &Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.ReassocTimer,   &Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.DisassocTimer,   &Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.AuthTimer,       &Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer,     &Cancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.ScanTimer,       &Cancelled);
-#endif // CONFIG_STA_SUPPORT //
-
-		//RTUSBCleanUpMLMEWaitQueue(pAd);	/* not used in RT28xx */
-		RTUSBCleanUpMLMEBulkOutQueue(pAd);
-
-		// Sometimes kernel will hang on, so we avoid calling MlmeSuspend().
-//		MlmeSuspend(pAd, TRUE);
-		//RTMPCancelTimer(&pAd->Mlme.PeriodicTimer, &Cancelled);
-
-		// Disable Rx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// Abort Tx, RX DMA.
-		RtmpDmaEnable(pAd, 0);
-
-		// Disable Tx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 2);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// Make sure there are no pending bulk in/out IRPs before we go on.
-/*=========================================================================*/
-		/* pAd->PendingRx is not of type atomic_t anymore in 28xx */
-//		while ((atomic_read(&pAd->PendingRx) > 0))	//pAd->BulkFlags != 0 wait bulk out finish
-		while ((pAd->PendingRx > 0))	//pAd->BulkFlags != 0 wait bulk out finish
-		{
-#if 1
-			ATE_RTUSBCancelPendingBulkInIRP(pAd);
-#else
-			NdisInterlockedDecrement(&pAd->PendingRx);
-#endif
-			/* delay 0.5 seconds */
-			RTMPusecDelay(500000);
-			pAd->PendingRx = 0;
-		}
-		/* peter : why don't we have to get BulkOutLock first ? */
-		while (((pAd->BulkOutPending[0] == TRUE) ||
-				(pAd->BulkOutPending[1] == TRUE) ||
-				(pAd->BulkOutPending[2] == TRUE) ||
-				(pAd->BulkOutPending[3] == TRUE)) && (pAd->BulkFlags != 0))	//pAd->BulkFlags != 0 wait bulk out finish
-		{
-			do
-			{
-				/* pAd->BulkOutPending[y] will be set to FALSE in RTUSBCancelPendingBulkOutIRP(pAd) */
-				RTUSBCancelPendingBulkOutIRP(pAd);
-			} while (FALSE);
-
-			/* we have enough time delay in RTUSBCancelPendingBulkOutIRP(pAd)
-			** so this is not necessary
-			*/
-//			RTMPusecDelay(500000);
-		}
-
-		/* pAd->PendingRx is not of type atomic_t anymore in 28xx */
-//		ASSERT(atomic_read(&pAd->PendingRx) == 0);
-		ASSERT(pAd->PendingRx == 0);
-/*=========================================================================*/
-
-		// reset Rx statistics.
-		pAd->ate.LastSNR0 = 0;
-		pAd->ate.LastSNR1 = 0;
-		pAd->ate.LastRssi0 = 0;
-		pAd->ate.LastRssi1 = 0;
-		pAd->ate.LastRssi2 = 0;
-		pAd->ate.AvgRssi0 = 0;
-		pAd->ate.AvgRssi1 = 0;
-		pAd->ate.AvgRssi2 = 0;
-		pAd->ate.AvgRssi0X8 = 0;
-		pAd->ate.AvgRssi1X8 = 0;
-		pAd->ate.AvgRssi2X8 = 0;
-		pAd->ate.NumOfAvgRssiSample = 0;
-
-#ifdef RALINK_28xx_QA
-		// Tx frame
-		pAd->ate.bQATxStart = FALSE;
-		pAd->ate.bQARxStart = FALSE;
-		pAd->ate.seq = 0;
-
-		// counters
-		pAd->ate.U2M = 0;
-		pAd->ate.OtherData = 0;
-		pAd->ate.Beacon = 0;
-		pAd->ate.OtherCount = 0;
-		pAd->ate.TxAc0 = 0;
-		pAd->ate.TxAc1 = 0;
-		pAd->ate.TxAc2 = 0;
-		pAd->ate.TxAc3 = 0;
-		pAd->ate.TxHCCA = 0;
-		pAd->ate.TxMgmt = 0;
-		pAd->ate.RSSI0 = 0;
-		pAd->ate.RSSI1 = 0;
-		pAd->ate.RSSI2 = 0;
-		pAd->ate.SNR0 = 0;
-		pAd->ate.SNR1 = 0;
-
-		// control
-		pAd->ate.TxDoneCount = 0;
-		pAd->ate.TxStatus = 0; // task Tx status // 0 --> task is idle, 1 --> task is running
-#endif // RALINK_28xx_QA //
-
-		// Soft reset BBP.
-		BbpSoftReset(pAd);
-
-
-#ifdef CONFIG_STA_SUPPORT
-		AsicDisableSync(pAd);
-
-		/*
-		** If we skip "LinkDown()", we should disable protection
-		** to prevent from sending out RTS or CTS-to-self.
-		*/
-		ATEDisableAsicProtect(pAd);
-		RTMPStationStop(pAd);
-#endif // CONFIG_STA_SUPPORT //
-
-		// Default value in BBP R22 is 0x0.
-		BbpData = 0;
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
-
-		// Clean bit4 to stop continuous Tx production test.
-		MacData &= 0xFFFFFFEF;
-	   	ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-	    	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
-		//Clean ATE Bulk in/out counter and continue setup
-		InterlockedExchange(&pAd->BulkOutRemained, 0);
-
-		/* NdisAcquireSpinLock()/NdisReleaseSpinLock() need only one argument in RT28xx */
-		NdisAcquireSpinLock(&pAd->GenericLock);
-		pAd->ContinBulkOut = FALSE;
-		pAd->ContinBulkIn = FALSE;
-		NdisReleaseSpinLock(&pAd->GenericLock);
-
-		RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE);
-	}
-	else if (!strcmp(arg, "ATESTOP"))
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE : ATESTOP ===>\n"));
-
-		// Default value in BBP R22 is 0x0.
-		BbpData = 0;
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);//0820
-		// Clean bit4 to stop continuous Tx production test.
-		MacData &= 0xFFFFFFEF;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData); // recover the MAC_SYS_CTRL register back.
-
-		// Disable Rx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		/*
-		** Abort Tx, RX DMA.
-		** Q   : How to do the following I/O if Tx, Rx DMA is aborted ?
-		** Ans : Bulk endpoints are aborted, while the control endpoint is not.
-		*/
-		RtmpDmaEnable(pAd, 0);
-
-		// Disable Tx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 2);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		/* Make sure there are no pending bulk in/out IRPs before we go on. */
-/*=========================================================================*/
-//		while ((atomic_read(&pAd->PendingRx) > 0))	//pAd->BulkFlags != 0 wait bulk out finish
-		while (pAd->PendingRx > 0)
-		{
-#if 1
-			ATE_RTUSBCancelPendingBulkInIRP(pAd);
-#else
-//			NdisInterlockedDecrement(&pAd->PendingRx);
-			pAd->PendingRx--;
-#endif
-			RTMPusecDelay(500000);
-		}
-
-		while (((pAd->BulkOutPending[0] == TRUE) ||
-				(pAd->BulkOutPending[1] == TRUE) ||
-				(pAd->BulkOutPending[2] == TRUE) ||
-				(pAd->BulkOutPending[3] == TRUE)) && (pAd->BulkFlags != 0))	//pAd->BulkFlags != 0 wait bulk out finish
-		{
-			do
-			{
-				RTUSBCancelPendingBulkOutIRP(pAd);
-			} while (FALSE);
-
-			RTMPusecDelay(500000);
-		}
-
-//		ASSERT(atomic_read(&pAd->PendingRx) == 0);
-		ASSERT(pAd->PendingRx == 0);
-/*=========================================================================*/
-/*      Reset Rx RING                                                      */
-/*=========================================================================*/
-//		InterlockedExchange(&pAd->PendingRx, 0);
-		pAd->PendingRx = 0;
-		pAd->NextRxBulkInReadIndex = 0;	// Next Rx Read index
-		pAd->NextRxBulkInIndex = RX_RING_SIZE - 1;	// Rx Bulk pointer
-		pAd->NextRxBulkInPosition = 0;
-		for (i = 0; i < (RX_RING_SIZE); i++)
-		{
-			PRX_CONTEXT  pRxContext = &(pAd->RxContext[i]);
-			NdisZeroMemory(pRxContext->TransferBuffer, MAX_RXBULK_SIZE);
-			/* peter : why don't we have to get BulkInLock first ? */
-			pRxContext->pAd	= pAd;
-			pRxContext->pIrp = NULL;
-            /* peter debug ++ */
-			pRxContext->BulkInOffset = 0;
-			pRxContext->bRxHandling = FALSE;
-            /* peter debug -- */
-			pRxContext->InUse		= FALSE;
-			pRxContext->IRPPending	= FALSE;
-			pRxContext->Readable	= FALSE;
-//			pRxContext->ReorderInUse = FALSE;
-//			pRxContext->ReadPosOffset = 0;
-		}
-
-/*=========================================================================*/
-/*      Reset Tx RING                                                      */
-/*=========================================================================*/
-		do
-		{
-			RTUSBCancelPendingBulkOutIRP(pAd);
-		} while (FALSE);
-
-/*=========================================================================*/
-		// Enable auto responder.
-		RTMP_IO_READ32(pAd, AUTO_RSP_CFG, &temp);
-		temp = temp | (0x01);
-		RTMP_IO_WRITE32(pAd, AUTO_RSP_CFG, temp);
-
-/*================================================*/
-		AsicEnableBssSync(pAd);
-
-		/* Soft reset BBP.*/
-		/* In 2870 chipset, ATE_BBP_IO_READ8_BY_REG_ID() == RTMP_BBP_IO_READ8_BY_REG_ID() */
-		/* Both rt2870ap and rt2870sta use BbpSoftReset(pAd) to do BBP soft reset */
-		BbpSoftReset(pAd);
-/*================================================*/
-		{
-#ifdef CONFIG_STA_SUPPORT
-			// Set all state machines back IDLE
-			pAd->Mlme.CntlMachine.CurrState    = CNTL_IDLE;
-			pAd->Mlme.AssocMachine.CurrState   = ASSOC_IDLE;
-			pAd->Mlme.AuthMachine.CurrState    = AUTH_REQ_IDLE;
-			pAd->Mlme.AuthRspMachine.CurrState = AUTH_RSP_IDLE;
-			pAd->Mlme.SyncMachine.CurrState    = SYNC_IDLE;
-			pAd->Mlme.ActMachine.CurrState    = ACT_IDLE;
-#endif // CONFIG_STA_SUPPORT //
-
-			//
-			// ===> refer to MlmeRestartStateMachine().
-			// When we entered ATE_START mode, PeriodicTimer was not cancelled.
-			// So we don't have to set it here.
-			//
-			//RTMPSetTimer(pAd, &pAd->Mlme.PeriodicTimer, MLME_TASK_EXEC_INTV);
-
-			ASSERT(pAd->CommonCfg.Channel != 0);
-
-			AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
-			AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-
-
-#ifdef CONFIG_STA_SUPPORT
-		    RTMPStationStart(pAd);
-#endif // CONFIG_STA_SUPPORT //
-		}
-//
-// These two steps have been done when entering ATE_STOP mode.
-//
-		// Clean ATE Bulk in/out counter and continue setup.
-		InterlockedExchange(&pAd->BulkOutRemained, 0);
-		NdisAcquireSpinLock(&pAd->GenericLock);
-		pAd->ContinBulkOut = FALSE;
-		pAd->ContinBulkIn = FALSE;
-		NdisReleaseSpinLock(&pAd->GenericLock);
-
-		/* Wait 50ms to prevent next URB to bulkout during HW reset. */
-		/* todo : remove this if not necessary */
-		NdisMSleep(50000);
-
-		pAd->ate.Mode = ATE_STOP;
-
-		// Enable Tx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value |= (1 << 2);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-/*=========================================================================*/
-		/* restore RX_FILTR_CFG */
-#ifdef CONFIG_STA_SUPPORT
-		/* restore RX_FILTR_CFG in order that QA maybe set it to 0x3 */
-		RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, STANORMAL);
-#endif // CONFIG_STA_SUPPORT //
-/*=========================================================================*/
-
-		// Enable Tx, RX DMA.
-		RtmpDmaEnable(pAd, 1);
-
-		// Enable Rx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value |= (1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// Wait 10ms to wait all of the bulk-in URBs to complete.
-		/* todo : remove this if not necessary */
-		NdisMSleep(10000);
-
-		// Everything is ready to start normal Tx/Rx.
-		RTUSBBulkReceive(pAd);
-		netif_start_queue(pAd->net_dev);
-
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("<=== ATE : ATESTOP \n"));
-	}
-	else if (!strcmp(arg, "TXCARR"))	// Tx Carrier
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: TXCARR\n"));
-		pAd->ate.Mode |= ATE_TXCARR;
-
-#ifdef RT30xx
-			for(i=0;i<ATE_BBP_REG_NUM;i++)
-				restore_BBP[i]=0;
-			//Record All BBP Value
-			for(i=0;i<ATE_BBP_REG_NUM;i++)
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd,i,&restore_BBP[i]);
-#endif // RT30xx //
-
-		// Disable Rx
-		// May be we need not to do this, because these have been done in ATE_START mode ???
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// QA has done the following steps if it is used.
-		if (pAd->ate.bQATxStart == FALSE)
-		{
-			// Soft reset BBP.
-			BbpSoftReset(pAd);
-
-			// Carrier Test set BBP R22 bit7=1, bit6=1, bit[5~0]=0x01
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-			BbpData &= 0xFFFFFF00; //clear bit7, bit6, bit[5~0]
-			BbpData |= 0x000000C1; //set bit7=1, bit6=1, bit[5~0]=0x01
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-
-			// set MAC_SYS_CTRL(0x1004) Continuous Tx Production Test (bit4) = 1
-			RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-			Value = Value | 0x00000010;
-			RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-		}
-	}
-	else if (!strcmp(arg, "TXCONT"))	// Tx Continue
-	{
-		if (pAd->ate.bQATxStart == TRUE)
-		{
-			/* set MAC_SYS_CTRL(0x1004) bit4(Continuous Tx Production Test)
-			   and bit2(MAC TX enable) back to zero. */
-			RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
-			MacData &= 0xFFFFFFEB;
-			RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
-
-			// set BBP R22 bit7=0
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-			BbpData &= 0xFFFFFF7F; //set bit7=0
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-		}
-
-		/* for TxCont mode.
-		** Step 1: Send 50 packets first then wait for a moment.
-		** Step 2: Send more 50 packet then start continue mode.
-		*/
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: TXCONT\n"));
-
-#ifdef RT30xx
-				for(i=0;i<ATE_BBP_REG_NUM;i++)
-				restore_BBP[i]=0;
-			//Record All BBP Value
-			for(i=0;i<ATE_BBP_REG_NUM;i++)
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd,i,&restore_BBP[i]);
-#endif // RT30xx //
-
-		// Step 1: send 50 packets first.
-		pAd->ate.Mode |= ATE_TXCONT;
-		pAd->ate.TxCount = 50;
-		pAd->ate.TxDoneCount = 0;
-
-		// Soft reset BBP.
-		BbpSoftReset(pAd);
-
-		// Abort Tx, RX DMA.
-		RtmpDmaEnable(pAd, 0);
-
-
-		/* Only needed if we have to send some normal frames. */
-		SetJapanFilter(pAd);
-
-		// Setup frame format.
-		ATESetUpFrame(pAd, 0);
-
-		// Enable Tx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value |= (1 << 2);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// Disable Rx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// Start Tx, RX DMA.
-		RtmpDmaEnable(pAd, 1);
-
-		InterlockedExchange(&pAd->BulkOutRemained, pAd->ate.TxCount);
-
-#ifdef	RALINK_28xx_QA
-		if (pAd->ate.bQATxStart == TRUE)
-		{
-			pAd->ate.TxStatus = 1;
-			//pAd->ate.Repeat = 0;
-		}
-#endif	// RALINK_28xx_QA //
-
-		NdisAcquireSpinLock(&pAd->GenericLock);//0820
-		pAd->ContinBulkOut = FALSE;
-		NdisReleaseSpinLock(&pAd->GenericLock);
-
-		RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE);
-
-		// Kick bulk out
-		RTUSBKickBulkOut(pAd);
-
-		/* To make sure all the 50 frames have been bulk out before executing step 2 */
-		while (atomic_read(&pAd->BulkOutRemained) > 0)
-		{
-			RTMPusecDelay(5000);
-		}
-
-		// Step 2: send more 50 packets then start continue mode.
-		// Abort Tx, RX DMA.
-		RtmpDmaEnable(pAd, 0);
-
-		// Cont. TX set BBP R22 bit7=1
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-		BbpData |= 0x00000080; //set bit7=1
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-
-		pAd->ate.TxCount = 50;
-		pAd->ate.TxDoneCount = 0;
-
-		SetJapanFilter(pAd);
-
-		// Setup frame format.
-		ATESetUpFrame(pAd, 0);
-
-		// Enable Tx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value |= (1 << 2);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// Disable Rx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 3);
-
-		// Start Tx, RX DMA.
-		RtmpDmaEnable(pAd, 1);
-
-		InterlockedExchange(&pAd->BulkOutRemained, pAd->ate.TxCount);
-
-#ifdef	RALINK_28xx_QA
-		if (pAd->ate.bQATxStart == TRUE)
-		{
-			pAd->ate.TxStatus = 1;
-			//pAd->ate.Repeat = 0;
-		}
-#endif	// RALINK_28xx_QA //
-
-		NdisAcquireSpinLock(&pAd->GenericLock);//0820
-		pAd->ContinBulkOut = FALSE;
-		NdisReleaseSpinLock(&pAd->GenericLock);
-
-		RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE);
-		// Kick bulk out
-		RTUSBKickBulkOut(pAd);
-
-#if 1
-		RTMPusecDelay(500);
-#else
-		while (atomic_read(&pAd->BulkOutRemained) > 0)
-		{
-			RTMPusecDelay(5000);
-		}
-#endif // 1 //
-
-		// Set MAC_SYS_CTRL(0x1004) Continuous Tx Production Test (bit4) = 1.
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
-		MacData |= 0x00000010;
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
-	}
-	else if (!strcmp(arg, "TXFRAME"))	// Tx Frames
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: TXFRAME(Count=0x%08x)\n", pAd->ate.TxCount));
-		pAd->ate.Mode |= ATE_TXFRAME;
-
-		// Soft reset BBP.
-		BbpSoftReset(pAd);
-
-		// Default value in BBP R22 is 0x0.
-		BbpData = 0;
-
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
-
-		// Clean bit4 to stop continuous Tx production test.
-		MacData &= 0xFFFFFFEF;
-
-	   	ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
-
-#ifdef RALINK_28xx_QA
-		// add this for LoopBack mode
-		if (pAd->ate.bQARxStart == FALSE)
-		{
-			// Disable Rx
-			RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-			Value &= ~(1 << 3);
-			RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-		}
-
-		if (pAd->ate.bQATxStart == TRUE)
-		{
-			pAd->ate.TxStatus = 1;
-			//pAd->ate.Repeat = 0;
-		}
-#else
-		// Disable Rx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-#endif // RALINK_28xx_QA //
-
-		// Enable Tx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value |= (1 << 2);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-        SetJapanFilter(pAd);
-
-		// Abort Tx, RX DMA.
-		RtmpDmaEnable(pAd, 0);
-
-		pAd->ate.TxDoneCount = 0;
-
-        // Setup frame format
-		ATESetUpFrame(pAd, 0);
-
-		// Start Tx, RX DMA.
-		RtmpDmaEnable(pAd, 1);
-
-		// Check count is continuous or not yet.
-		//
-		// Due to the type mismatch between "pAd->BulkOutRemained"(atomic_t) and "pAd->ate.TxCount"(UINT32)
-		//
-		if (pAd->ate.TxCount == 0)
-		{
-			InterlockedExchange(&pAd->BulkOutRemained, 0);
-		}
-		else
-		{
-			InterlockedExchange(&pAd->BulkOutRemained, pAd->ate.TxCount);
-		}
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("bulk out count = %d\n", atomic_read(&pAd->BulkOutRemained)));
-		ASSERT((atomic_read(&pAd->BulkOutRemained) >= 0));
-
-		if (atomic_read(&pAd->BulkOutRemained) == 0)
-		{
-			ATEDBGPRINT(RT_DEBUG_TRACE, ("Send packet countinuously\n"));
-
-			/* In 28xx, NdisAcquireSpinLock() == spin_lock_bh() */
-			/* NdisAcquireSpinLock only need one argument in 28xx. */
-			NdisAcquireSpinLock(&pAd->GenericLock);
-			pAd->ContinBulkOut = TRUE;
-			NdisReleaseSpinLock(&pAd->GenericLock);
-
-			/* In 28xx, BULK_OUT_LOCK() == spin_lock_irqsave() */
-			BULK_OUT_LOCK(&pAd->BulkOutLock[0], IrqFlags);// peter : NdisAcquireSpinLock ==> BULK_OUT_LOCK
-			pAd->BulkOutPending[0] = FALSE;
-			BULK_OUT_UNLOCK(&pAd->BulkOutLock[0], IrqFlags);// peter : NdisAcquireSpinLock ==> BULK_OUT_LOCK
-		}
-		else
-		{
-			ATEDBGPRINT(RT_DEBUG_TRACE, ("Send packets depend on counter\n"));
-
-			NdisAcquireSpinLock(&pAd->GenericLock);
-			pAd->ContinBulkOut = FALSE;
-			NdisReleaseSpinLock(&pAd->GenericLock);
-
-			BULK_OUT_LOCK(&pAd->BulkOutLock[0], IrqFlags);
-			pAd->BulkOutPending[0] = FALSE;
-			BULK_OUT_UNLOCK(&pAd->BulkOutLock[0], IrqFlags);
-		}
-
-		RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE);
-
-		// Kick bulk out
-		RTUSBKickBulkOut(pAd);
-	}
-#ifdef RALINK_28xx_QA
-	else if (!strcmp(arg, "TXSTOP")) 		//Enter ATE mode and set Tx/Rx Idle
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: TXSTOP\n"));
-
-		atemode = pAd->ate.Mode;
-		pAd->ate.Mode &= ATE_TXSTOP;
-		pAd->ate.bQATxStart = FALSE;
-//		pAd->ate.TxDoneCount = pAd->ate.TxCount;
-
-/*=========================================================================*/
-		if (atemode & ATE_TXCARR)
-		{
-			// No Carrier Test set BBP R22 bit7=0, bit6=0, bit[5~0]=0x0
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-			BbpData &= 0xFFFFFF00; //clear bit7, bit6, bit[5~0]
-		    ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-		}
-		else if (atemode & ATE_TXCARRSUPP)
-		{
-			// No Cont. TX set BBP R22 bit7=0
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-			BbpData &= ~(1 << 7); //set bit7=0
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-
-			// No Carrier Suppression set BBP R24 bit0=0
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R24, &BbpData);
-			BbpData &= 0xFFFFFFFE; //clear bit0
-		    ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, BbpData);
-		}
-		else if ((atemode & ATE_TXFRAME) || (atemode == ATE_STOP))
-		{
-			if (atemode & ATE_TXCONT)
-			{
-				// No Cont. TX set BBP R22 bit7=0
-				ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
-				BbpData &= ~(1 << 7); //set bit7=0
-				ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-			}
-		}
-
-/*=========================================================================*/
-		RTUSBRejectPendingPackets(pAd);
-		RTUSBCleanUpDataBulkOutQueue(pAd);
-
-		/* not used in RT28xx */
-		//RTUSBCleanUpMLMEWaitQueue(pAd);
-		/* empty function so far */
-		RTUSBCleanUpMLMEBulkOutQueue(pAd);
-/*=========================================================================*/
-		// Abort Tx, RX DMA.
-		RtmpDmaEnable(pAd, 0);
-/*=========================================================================*/
-
-		/* In 28xx, pAd->PendingRx is not of type atomic_t anymore */
-//		while ((atomic_read(&pAd->PendingRx) > 0))	//pAd->BulkFlags != 0 wait bulk out finish
-		/* peter todo : BulkInLock */
-		while (pAd->PendingRx > 0)
-		{
-#if 1
-			ATE_RTUSBCancelPendingBulkInIRP(pAd);
-#else
-//			NdisInterlockedDecrement(&pAd->PendingRx);
-			pAd->PendingRx--;
-#endif
-			RTMPusecDelay(500000);
-		}
-
-		while (((pAd->BulkOutPending[0] == TRUE) ||
-				(pAd->BulkOutPending[1] == TRUE) ||
-				(pAd->BulkOutPending[2] == TRUE) ||
-				(pAd->BulkOutPending[3] == TRUE)) && (pAd->BulkFlags != 0))	//pAd->BulkFlags != 0 wait bulk out finish
-		{
-			do
-			{
-				RTUSBCancelPendingBulkOutIRP(pAd);
-			} while (FALSE);
-
-			RTMPusecDelay(500000);
-		}
-
-		ASSERT(pAd->PendingRx == 0);
-/*=========================================================================*/
-		// Enable Tx, Rx DMA.
-		RtmpDmaEnable(pAd, 1);
-
-		/* task Tx status : 0 --> task is idle, 1 --> task is running */
-		pAd->ate.TxStatus = 0;
-
-		// Soft reset BBP.
-		BbpSoftReset(pAd);
-
-		// Disable Tx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
-		MacData &= (0xfffffffb);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
-
-		//Clean ATE Bulk in/out counter and continue setup
-		InterlockedExchange(&pAd->BulkOutRemained, 0);
-
-		pAd->ContinBulkOut = FALSE;
-	}
-	else if (!strcmp(arg, "RXSTOP"))
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: RXSTOP\n"));
-		atemode = pAd->ate.Mode;
-
-		// Disable Rx
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		pAd->ate.Mode &= ATE_RXSTOP;
-		pAd->ate.bQARxStart = FALSE;
-//		pAd->ate.TxDoneCount = pAd->ate.TxCount;
-
-/*=========================================================================*/
-		RTUSBRejectPendingPackets(pAd);
-		RTUSBCleanUpDataBulkOutQueue(pAd);
-
-		/* not used in RT28xx */
-		//RTUSBCleanUpMLMEWaitQueue(pAd);
-		RTUSBCleanUpMLMEBulkOutQueue(pAd);
-/*=========================================================================*/
-
-		// Abort Tx, RX DMA.
-		RtmpDmaEnable(pAd, 0);
-/*=========================================================================*/
-//		while ((atomic_read(&pAd->PendingRx) > 0))
-		while (pAd->PendingRx > 0)
-		{
-#if 1
-			ATE_RTUSBCancelPendingBulkInIRP(pAd);
-#else
-//			NdisInterlockedDecrement(&pAd->PendingRx);
-			pAd->PendingRx--;
-#endif
-			RTMPusecDelay(500000);
-		}
-
-		while (((pAd->BulkOutPending[0] == TRUE) ||
-				(pAd->BulkOutPending[1] == TRUE) ||
-				(pAd->BulkOutPending[2] == TRUE) ||
-				(pAd->BulkOutPending[3] == TRUE)) && (pAd->BulkFlags != 0))	//pAd->BulkFlags != 0 wait bulk out finish
-		{
-			do
-			{
-				RTUSBCancelPendingBulkOutIRP(pAd);
-			} while (FALSE);
-
-			RTMPusecDelay(500000);
-		}
-
-		ASSERT(pAd->PendingRx == 0);
-/*=========================================================================*/
-
-		// Soft reset BBP.
-		BbpSoftReset(pAd);
-		pAd->ContinBulkIn = FALSE;
-	}
-#endif // RALINK_28xx_QA //
-	else if (!strcmp(arg, "RXFRAME")) // Rx Frames
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: RXFRAME\n"));
-
-		// Disable Rx of MAC block
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// Default value in BBP R22 is 0x0.
-		BbpData = 0;
-
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
-		// Clean bit4 to stop continuous Tx production test.
-		MacData &= 0xFFFFFFEF;
-
-	   	ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
-
-		pAd->ate.Mode |= ATE_RXFRAME;
-
-		// Abort Tx, RX DMA.
-		RtmpDmaEnable(pAd, 0);
-
-		// Disable TX of MAC block
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value &= ~(1 << 2);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-        // Reset Rx RING.
-		for ( i = 0; i < (RX_RING_SIZE); i++)
-		{
-			PRX_CONTEXT  pRxContext = &(pAd->RxContext[i]);
-
-			pRxContext->InUse = FALSE;
-			pRxContext->IRPPending = FALSE;
-			pRxContext->Readable = FALSE;
-
-			//
-			// Get the urb from kernel back to driver.
-			//
-			RTUSB_UNLINK_URB(pRxContext->pUrb);
-
-			/* Sleep 200 microsecs to give cancellation time to work. */
-			NdisMSleep(200);
-			pAd->BulkInReq = 0;
-
-//			InterlockedExchange(&pAd->PendingRx, 0);
-			pAd->PendingRx = 0;
-			pAd->NextRxBulkInReadIndex = 0;	// Next Rx Read index
-			pAd->NextRxBulkInIndex		= RX_RING_SIZE - 1;	// Rx Bulk pointer
-			pAd->NextRxBulkInPosition = 0;
-		}
-
-		// read to clear counters
-		RTUSBReadMACRegister(pAd, RX_STA_CNT0, &temp); //RX PHY & RX CRC count
-		RTUSBReadMACRegister(pAd, RX_STA_CNT1, &temp); //RX PLCP error count & CCA false alarm count
-		RTUSBReadMACRegister(pAd, RX_STA_CNT2, &temp); //RX FIFO overflow frame count & RX duplicated filtered frame count
-
-		pAd->ContinBulkIn = TRUE;
-
-		// Enable Tx, RX DMA.
-		RtmpDmaEnable(pAd, 1);
-
-		// Enable RX of MAC block
-		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-		Value |= (1 << 3);
-		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-		// Kick bulk in
-		RTUSBBulkReceive(pAd);
-	}
-	else
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: Invalid arg!\n"));
-		return FALSE;
-	}
-	RTMPusecDelay(5000);
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("<=== ATECmdHandler()\n"));
-
-	return TRUE;
-}
-#endif // RT2870 //
-
-INT	Set_ATE_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	if (ATECmdHandler(pAd, arg))
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_Proc Success\n"));
-
-
-		return TRUE;
-	}
-	else
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_Proc Failed\n"));
-		return FALSE;
-	}
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE ADDR1=DA for TxFrame(AP  : To DS = 0 ; From DS = 1)
-        or
-        Set ATE ADDR3=DA for TxFrame(STA : To DS = 1 ; From DS = 0)
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_DA_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR				*value;
-	INT					i;
-
-	if(strlen(arg) != 17)  //Mac address acceptable format 01:02:03:04:05:06 length 17
-		return FALSE;
-
-    for (i=0, value = rstrtok(arg, ":"); value; value = rstrtok(NULL, ":"))
-	{
-		if((strlen(value) != 2) || (!isxdigit(*value)) || (!isxdigit(*(value+1))) )
-			return FALSE;  //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
-		AtoH(value, &pAd->ate.Addr3[i++], 1);
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-	if(i != 6)
-		return FALSE;  //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_DA_Proc (DA = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAd->ate.Addr3[0],
-		pAd->ate.Addr3[1], pAd->ate.Addr3[2], pAd->ate.Addr3[3], pAd->ate.Addr3[4], pAd->ate.Addr3[5]));
-#endif // CONFIG_STA_SUPPORT //
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_DA_Proc Success\n"));
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE ADDR3=SA for TxFrame(AP  : To DS = 0 ; From DS = 1)
-        or
-        Set ATE ADDR2=SA for TxFrame(STA : To DS = 1 ; From DS = 0)
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_SA_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR				*value;
-	INT					i;
-
-	if(strlen(arg) != 17)  //Mac address acceptable format 01:02:03:04:05:06 length 17
-		return FALSE;
-
-    for (i=0, value = rstrtok(arg, ":"); value; value = rstrtok(NULL, ":"))
-	{
-		if((strlen(value) != 2) || (!isxdigit(*value)) || (!isxdigit(*(value+1))) )
-			return FALSE;  //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
-		AtoH(value, &pAd->ate.Addr2[i++], 1);
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-	if(i != 6)
-		return FALSE;  //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_SA_Proc (SA = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAd->ate.Addr2[0],
-		pAd->ate.Addr2[1], pAd->ate.Addr2[2], pAd->ate.Addr2[3], pAd->ate.Addr2[4], pAd->ate.Addr2[5]));
-#endif // CONFIG_STA_SUPPORT //
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_SA_Proc Success\n"));
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE ADDR2=BSSID for TxFrame(AP  : To DS = 0 ; From DS = 1)
-        or
-        Set ATE ADDR1=BSSID for TxFrame(STA : To DS = 1 ; From DS = 0)
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_BSSID_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR				*value;
-	INT					i;
-
-	if(strlen(arg) != 17)  //Mac address acceptable format 01:02:03:04:05:06 length 17
-		return FALSE;
-
-    for (i=0, value = rstrtok(arg, ":"); value; value = rstrtok(NULL, ":"))
-	{
-		if((strlen(value) != 2) || (!isxdigit(*value)) || (!isxdigit(*(value+1))) )
-			return FALSE;  //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
-		AtoH(value, &pAd->ate.Addr1[i++], 1);
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-	if(i != 6)
-		return FALSE;  //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_BSSID_Proc (BSSID = %2X:%2X:%2X:%2X:%2X:%2X)\n",	pAd->ate.Addr1[0],
-		pAd->ate.Addr1[1], pAd->ate.Addr1[2], pAd->ate.Addr1[3], pAd->ate.Addr1[4], pAd->ate.Addr1[5]));
-#endif // CONFIG_STA_SUPPORT //
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_BSSID_Proc Success\n"));
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx Channel
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_CHANNEL_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UCHAR channel;
-
-	channel = simple_strtol(arg, 0, 10);
-
-	if ((channel < 1) || (channel > 216))// to allow A band channel : ((channel < 1) || (channel > 14))
-	{
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_CHANNEL_Proc::Out of range, it should be in range of 1~14.\n"));
-		return FALSE;
-	}
-	pAd->ate.Channel = channel;
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_CHANNEL_Proc (ATE Channel = %d)\n", pAd->ate.Channel));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_CHANNEL_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx Power0
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_POWER0_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR TxPower;
-
-	TxPower = simple_strtol(arg, 0, 10);
-
-	if (pAd->ate.Channel <= 14)
-	{
-		if ((TxPower > 31) || (TxPower < 0))
-		{
-			ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_POWER0_Proc::Out of range (Value=%d)\n", TxPower));
-			return FALSE;
-		}
-	}
-	else// 5.5GHz
-	{
-		if ((TxPower > 15) || (TxPower < -7))
-		{
-			ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_POWER0_Proc::Out of range (Value=%d)\n", TxPower));
-			return FALSE;
-		}
-	}
-
-	pAd->ate.TxPower0 = TxPower;
-	ATETxPwrHandler(pAd, 0);
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_POWER0_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx Power1
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_POWER1_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR TxPower;
-
-	TxPower = simple_strtol(arg, 0, 10);
-
-	if (pAd->ate.Channel <= 14)
-	{
-	if ((TxPower > 31) || (TxPower < 0))
-	{
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_POWER1_Proc::Out of range (Value=%d)\n", TxPower));
-		return FALSE;
-	}
-	}
-	else
-	{
-		if ((TxPower > 15) || (TxPower < -7))
-		{
-			ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_POWER1_Proc::Out of range (Value=%d)\n", TxPower));
-			return FALSE;
-		}
-	}
-
-	pAd->ate.TxPower1 = TxPower;
-	ATETxPwrHandler(pAd, 1);
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_POWER1_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx Antenna
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_Antenna_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR value;
-
-	value = simple_strtol(arg, 0, 10);
-
-	if ((value > 2) || (value < 0))
-	{
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_Antenna_Proc::Out of range (Value=%d)\n", value));
-		return FALSE;
-	}
-
-	pAd->ate.TxAntennaSel = value;
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_Antenna_Proc (Antenna = %d)\n", pAd->ate.TxAntennaSel));
-	ATEDBGPRINT(RT_DEBUG_TRACE,("Ralink: Set_ATE_TX_Antenna_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Rx Antenna
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_RX_Antenna_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR value;
-
-	value = simple_strtol(arg, 0, 10);
-
-	if ((value > 3) || (value < 0))
-	{
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_RX_Antenna_Proc::Out of range (Value=%d)\n", value));
-		return FALSE;
-	}
-
-	pAd->ate.RxAntennaSel = value;
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_RX_Antenna_Proc (Antenna = %d)\n", pAd->ate.RxAntennaSel));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_RX_Antenna_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE RF frequence offset
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_FREQOFFSET_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UCHAR RFFreqOffset;
-	ULONG R4;
-
-	RFFreqOffset = simple_strtol(arg, 0, 10);
-#ifndef RT30xx
-	if(RFFreqOffset >= 64)
-#endif // RT30xx //
-#ifdef RT30xx
-//2008/08/06: KH modified the limit of offset value from 65 to 95(0x5F)
-	if(RFFreqOffset >= 95)
-#endif // RT30xx //
-	{
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_FREQOFFSET_Proc::Out of range, it should be in range of 0~63.\n"));
-		return FALSE;
-	}
-
-	pAd->ate.RFFreqOffset = RFFreqOffset;
-#ifdef RT30xx
-	if(IS_RT30xx(pAd))
-	{
-		// Set RF offset
-		UCHAR RFValue;
-		RT30xxReadRFRegister(pAd, RF_R23, (PUCHAR)&RFValue);
-				//2008/08/06: KH modified "pAd->RFFreqOffset" to "pAd->ate.RFFreqOffset"
-				RFValue = (RFValue & 0x80) | pAd->ate.RFFreqOffset;
-		RT30xxWriteRFRegister(pAd, RF_R23, (UCHAR)RFValue);
-	}
-	else
-#endif // RT30xx //
-	{
-
-		R4 = pAd->ate.RFFreqOffset << 15;		// shift TX power control to correct RF register bit position
-		R4 |= (pAd->LatchRfRegs.R4 & ((~0x001f8000)));
-		pAd->LatchRfRegs.R4 = R4;
-
-		RtmpRfIoWrite(pAd);
-	}
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_FREQOFFSET_Proc (RFFreqOffset = %d)\n", pAd->ate.RFFreqOffset));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_FREQOFFSET_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE RF BW
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_BW_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	int i;
-	UCHAR value = 0;
-	UCHAR BBPCurrentBW;
-
-	BBPCurrentBW = simple_strtol(arg, 0, 10);
-
-	if(BBPCurrentBW == 0)
-		pAd->ate.TxWI.BW = BW_20;
-	else
-		pAd->ate.TxWI.BW = BW_40;
-
-	if(pAd->ate.TxWI.BW == BW_20)
-	{
-		if(pAd->ate.Channel <= 14)
-		{
- 		for (i=0; i<5; i++)
- 		{
-				if (pAd->Tx20MPwrCfgGBand[i] != 0xffffffff)
-				{
-					RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, pAd->Tx20MPwrCfgGBand[i]);
-					RTMPusecDelay(5000);
-				}
-			}
-		}
-		else
-		{
-			for (i=0; i<5; i++)
-			{
-				if (pAd->Tx20MPwrCfgABand[i] != 0xffffffff)
- 			{
-					RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, pAd->Tx20MPwrCfgABand[i]);
- 				RTMPusecDelay(5000);
- 			}
- 		}
-		}
-
-		//Set BBP R4 bit[4:3]=0:0
- 		ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &value);
- 		value &= (~0x18);
- 		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, value);
-
-  		//Set BBP R66=0x3C
- 		value = 0x3C;
- 		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, value);
-		//Set BBP R68=0x0B
-		//to improve Rx sensitivity.
-		value = 0x0B;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R68, value);
-		//Set BBP R69=0x16
-		value = 0x16;
- 		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, value);
-		//Set BBP R70=0x08
-		value = 0x08;
- 		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, value);
-		//Set BBP R73=0x11
-		value = 0x11;
- 		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, value);
-
-	    // If Channel=14, Bandwidth=20M and Mode=CCK, Set BBP R4 bit5=1
-	    // (Japan filter coefficients)
-	    // This segment of code will only works when ATETXMODE and ATECHANNEL
-	    // were set to MODE_CCK and 14 respectively before ATETXBW is set to 0.
-	    //=====================================================================
-		if (pAd->ate.Channel == 14)
-		{
-			int TxMode = pAd->ate.TxWI.PHYMODE;
-			if (TxMode == MODE_CCK)
-			{
-				// when Channel==14 && Mode==CCK && BandWidth==20M, BBP R4 bit5=1
- 				ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &value);
-				value |= 0x20; //set bit5=1
- 				ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, value);
-			}
-		}
-
-	    //=====================================================================
-		// If bandwidth != 40M, RF Reg4 bit 21 = 0.
-#ifdef RT30xx
-	// Set BW
-		if(IS_RT30xx(pAd))
-			RT30xxWriteRFRegister(pAd, RF_R24, (UCHAR) pAd->Mlme.CaliBW20RfR24);
-		else
-#endif // RT30xx //
-		{
-		pAd->LatchRfRegs.R4 &= ~0x00200000;
-		RtmpRfIoWrite(pAd);
-	}
-
-	}
-	else if(pAd->ate.TxWI.BW == BW_40)
-	{
-		if(pAd->ate.Channel <= 14)
-		{
-			for (i=0; i<5; i++)
-			{
-				if (pAd->Tx40MPwrCfgGBand[i] != 0xffffffff)
-				{
-					RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, pAd->Tx40MPwrCfgGBand[i]);
-					RTMPusecDelay(5000);
-				}
-			}
-		}
-		else
-		{
-			for (i=0; i<5; i++)
-			{
-				if (pAd->Tx40MPwrCfgABand[i] != 0xffffffff)
-				{
-					RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, pAd->Tx40MPwrCfgABand[i]);
-					RTMPusecDelay(5000);
-				}
-			}
-#ifdef DOT11_N_SUPPORT
-			if ((pAd->ate.TxWI.PHYMODE >= MODE_HTMIX) && (pAd->ate.TxWI.MCS == 7))
-			{
-    			value = 0x28;
-    			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R67, value);
-			}
-#endif // DOT11_N_SUPPORT //
-		}
-
-		//Set BBP R4 bit[4:3]=1:0
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &value);
-		value &= (~0x18);
-		value |= 0x10;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, value);
-
-		//Set BBP R66=0x3C
-		value = 0x3C;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, value);
-		//Set BBP R68=0x0C
-		//to improve Rx sensitivity.
-		value = 0x0C;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R68, value);
-		//Set BBP R69=0x1A
-		value = 0x1A;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, value);
-		//Set BBP R70=0x0A
-		value = 0x0A;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, value);
-		//Set BBP R73=0x16
-		value = 0x16;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, value);
-
-		// If bandwidth = 40M, set RF Reg4 bit 21 = 1.
-#ifdef RT30xx
-	// Set BW
-		if(IS_RT30xx(pAd))
-			RT30xxWriteRFRegister(pAd, RF_R24, (UCHAR) pAd->Mlme.CaliBW40RfR24);
-		else
-#endif // RT30xx //
-		{
-			pAd->LatchRfRegs.R4 |= 0x00200000;
-			RtmpRfIoWrite(pAd);
-		}
-	}
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_BW_Proc (BBPCurrentBW = %d)\n", pAd->ate.TxWI.BW));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_BW_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx frame length
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_LENGTH_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	pAd->ate.TxLength = simple_strtol(arg, 0, 10);
-
-	if((pAd->ate.TxLength < 24) || (pAd->ate.TxLength > (MAX_FRAME_SIZE - 34/* == 2312 */)))
-	{
-		pAd->ate.TxLength = (MAX_FRAME_SIZE - 34/* == 2312 */);
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_LENGTH_Proc::Out of range, it should be in range of 24~%d.\n", (MAX_FRAME_SIZE - 34/* == 2312 */)));
-		return FALSE;
-	}
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_LENGTH_Proc (TxLength = %d)\n", pAd->ate.TxLength));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_LENGTH_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx frame count
-
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_COUNT_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	pAd->ate.TxCount = simple_strtol(arg, 0, 10);
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_COUNT_Proc (TxCount = %d)\n", pAd->ate.TxCount));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_COUNT_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx frame MCS
-
-        Return:
-        	TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_MCS_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UCHAR MCS;
-	int result;
-
-	MCS = simple_strtol(arg, 0, 10);
-	result = CheckMCSValid(pAd->ate.TxWI.PHYMODE, MCS);
-
-	if (result != -1)
-	{
-		pAd->ate.TxWI.MCS = (UCHAR)MCS;
-	}
-	else
-	{
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_MCS_Proc::Out of range, refer to rate table.\n"));
-		return FALSE;
-	}
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_MCS_Proc (MCS = %d)\n", pAd->ate.TxWI.MCS));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_MCS_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx frame Mode
-        0: MODE_CCK
-        1: MODE_OFDM
-        2: MODE_HTMIX
-        3: MODE_HTGREENFIELD
-
-        Return:
-        	TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_MODE_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	pAd->ate.TxWI.PHYMODE = simple_strtol(arg, 0, 10);
-
-	if(pAd->ate.TxWI.PHYMODE > 3)
-	{
-		pAd->ate.TxWI.PHYMODE = 0;
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_MODE_Proc::Out of range. it should be in range of 0~3\n"));
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("0: CCK, 1: OFDM, 2: HT_MIX, 3: HT_GREEN_FIELD.\n"));
-		return FALSE;
-	}
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_MODE_Proc (TxMode = %d)\n", pAd->ate.TxWI.PHYMODE));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_MODE_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set ATE Tx frame GI
-
-        Return:
-        	TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_ATE_TX_GI_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	pAd->ate.TxWI.ShortGI = simple_strtol(arg, 0, 10);
-
-	if(pAd->ate.TxWI.ShortGI > 1)
-	{
-		pAd->ate.TxWI.ShortGI = 0;
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_GI_Proc::Out of range\n"));
-		return FALSE;
-	}
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_GI_Proc (GI = %d)\n", pAd->ate.TxWI.ShortGI));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_GI_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-    ==========================================================================
- */
-INT	Set_ATE_RX_FER_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	pAd->ate.bRxFer = simple_strtol(arg, 0, 10);
-
-	if (pAd->ate.bRxFer == 1)
-	{
-		pAd->ate.RxCntPerSec = 0;
-		pAd->ate.RxTotalCnt = 0;
-	}
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_RX_FER_Proc (bRxFer = %d)\n", pAd->ate.bRxFer));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_RX_FER_Proc Success\n"));
-
-
-	return TRUE;
-}
-
-INT Set_ATE_Read_RF_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-#ifdef RT30xx
-//2008/07/10:KH add to support RT30xx ATE<--
-	if(IS_RT30xx(pAd))
-	{
-			/* modify by WY for Read RF Reg. error */
-		UCHAR RFValue;
-		INT index=0;
-		for (index = 0; index < 32; index++)
-		{
-			RT30xxReadRFRegister(pAd, index, (PUCHAR)&RFValue);
-			printk("R%d=%d\n",index,RFValue);
-		}
-	}
-	else
-//2008/07/10:KH add to support RT30xx ATE-->
-#endif // RT30xx //
-	{
-		ate_print(KERN_EMERG "R1 = %lx\n", pAd->LatchRfRegs.R1);
-		ate_print(KERN_EMERG "R2 = %lx\n", pAd->LatchRfRegs.R2);
-		ate_print(KERN_EMERG "R3 = %lx\n", pAd->LatchRfRegs.R3);
-		ate_print(KERN_EMERG "R4 = %lx\n", pAd->LatchRfRegs.R4);
-	}
-	return TRUE;
-}
-
-INT Set_ATE_Write_RF1_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-#ifdef RT30xx
-//2008/07/10:KH add to support 3070 ATE<--
-	if(IS_RT30xx(pAd))
-	{
-		printk("Warning!! RT30xx Don't Support\n");
-		return FALSE;
-
-	}
-	else
-//2008/07/10:KH add to support 3070 ATE-->
-#endif // RT30xx //
-	{
-		UINT32 value = simple_strtol(arg, 0, 16);
-
-		pAd->LatchRfRegs.R1 = value;
-		RtmpRfIoWrite(pAd);
-	}
-	return TRUE;
-
-}
-
-INT Set_ATE_Write_RF2_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-#ifdef RT30xx
-//2008/07/10:KH add to support 3070 ATE<--
-	if(IS_RT30xx(pAd))
-	{
-		printk("Warning!! RT30xx Don't Support\n");
-		return FALSE;
-
-	}
-	else
-//2008/07/10:KH add to support 3070 ATE-->
-#endif // RT30xx //
-	{
-		UINT32 value = simple_strtol(arg, 0, 16);
-
-		pAd->LatchRfRegs.R2 = value;
-		RtmpRfIoWrite(pAd);
-	}
-	return TRUE;
-}
-
-INT Set_ATE_Write_RF3_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-#ifdef RT30xx
-//2008/07/10:KH add to support 3070 ATE<--
-	if(IS_RT30xx(pAd))
-	{
-		printk("Warning!! RT30xx Don't Support\n");
-		return FALSE;
-
-	}
-	else
-//2008/07/10:KH add to support 3070 ATE-->
-#endif // RT30xx //
-	{
-		UINT32 value = simple_strtol(arg, 0, 16);
-
-		pAd->LatchRfRegs.R3 = value;
-		RtmpRfIoWrite(pAd);
-	}
-	return TRUE;
-}
-
-INT Set_ATE_Write_RF4_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-#ifdef RT30xx
-//2008/07/10:KH add to support 3070 ATE<--
-	if(IS_RT30xx(pAd))
-	{
-		printk("Warning!! RT30xx Don't Support\n");
-		return FALSE;
-
-	}
-	else
-//2008/07/10:KH add to support 3070 ATE-->
-#endif // RT30xx //
-	{
-		UINT32 value = simple_strtol(arg, 0, 16);
-
-		pAd->LatchRfRegs.R4 = value;
-		RtmpRfIoWrite(pAd);
-	}
-	return TRUE;
-}
-#ifdef RT30xx
-//2008/07/10:KH add to support 3070 ATE<--
-INT	SET_ATE_3070RF_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	CHAR *this_char;
-	CHAR *value;
-	UINT32 Reg,RFValue;
-	if(IS_RT30xx(pAd))
-	{
-		printk("SET_ATE_3070RF_Proc=%s\n",arg);
-		this_char =arg;
-		if ((value = strchr(this_char, ':')) != NULL)
-			*value++ = 0;
-		Reg= simple_strtol(this_char, 0, 16);
-		RFValue= simple_strtol(value, 0, 16);
-		printk("RF Reg[%d]=%d\n",Reg,RFValue);
-		RT30xxWriteRFRegister(pAd, Reg,RFValue);
-	}
-	else
-		printk("Warning!! Only 3070 Support\n");
-	return TRUE;
-}
-//2008/07/10:KH add to support 3070 ATE-->
-#endif // RT30xx //
-/*
-    ==========================================================================
-    Description:
-        Load and Write EEPROM from a binary file prepared in advance.
-
-        Return:
-        	TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-#ifndef UCOS
-INT Set_ATE_Load_E2P_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	BOOLEAN		    ret = FALSE;
-	PUCHAR			src = EEPROM_BIN_FILE_NAME;
-	struct file		*srcf;
-	INT32 			retval, orgfsuid, orgfsgid;
-   	mm_segment_t	orgfs;
-	USHORT 			WriteEEPROM[(EEPROM_SIZE/2)];
-	UINT32			FileLength = 0;
-	UINT32 			value = simple_strtol(arg, 0, 10);
-
-	ATEDBGPRINT(RT_DEBUG_ERROR, ("===> %s (value=%d)\n\n", __FUNCTION__, value));
-
-	if (value > 0)
-	{
-		/* zero the e2p buffer */
-		NdisZeroMemory((PUCHAR)WriteEEPROM, EEPROM_SIZE);
-
-		/* save uid and gid used for filesystem access.
-	    ** set user and group to 0 (root)
-	    */
-		orgfsuid = current->fsuid;
-		orgfsgid = current->fsgid;
-		/* as root */
-		current->fsuid = current->fsgid = 0;
-    	orgfs = get_fs();
-    	set_fs(KERNEL_DS);
-
-		do
-		{
-			/* open the bin file */
-			srcf = filp_open(src, O_RDONLY, 0);
-
-			if (IS_ERR(srcf))
-			{
-				ate_print("%s - Error %ld opening %s\n", __FUNCTION__, -PTR_ERR(srcf), src);
-				break;
-			}
-
-			/* the object must have a read method */
-			if ((srcf->f_op == NULL) || (srcf->f_op->read == NULL))
-			{
-				ate_print("%s - %s does not have a read method\n", __FUNCTION__, src);
-				break;
-			}
-
-			/* read the firmware from the file *.bin */
-			FileLength = srcf->f_op->read(srcf,
-										  (PUCHAR)WriteEEPROM,
-										  EEPROM_SIZE,
-										  &srcf->f_pos);
-
-			if (FileLength != EEPROM_SIZE)
-			{
-				ate_print("%s: error file length (=%d) in e2p.bin\n",
-					   __FUNCTION__, FileLength);
-				break;
-			}
-			else
-			{
-				/* write the content of .bin file to EEPROM */
-				rt_ee_write_all(pAd, WriteEEPROM);
-				ret = TRUE;
-			}
-			break;
-		} while(TRUE);
-
-		/* close firmware file */
-		if (IS_ERR(srcf))
-		{
-				;
-		}
-		else
-		{
-			retval = filp_close(srcf, NULL);
-			if (retval)
-			{
-				ATEDBGPRINT(RT_DEBUG_ERROR, ("--> Error %d closing %s\n", -retval, src));
-
-			}
-		}
-
-		/* restore */
-		set_fs(orgfs);
-		current->fsuid = orgfsuid;
-		current->fsgid = orgfsgid;
-	}
-    ATEDBGPRINT(RT_DEBUG_ERROR, ("<=== %s (ret=%d)\n", __FUNCTION__, ret));
-
-    return ret;
-
-}
-#else
-INT Set_ATE_Load_E2P_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	USHORT 			WriteEEPROM[(EEPROM_SIZE/2)];
-	struct iwreq	*wrq = (struct iwreq *)arg;
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("===> %s (wrq->u.data.length = %d)\n\n", __FUNCTION__, wrq->u.data.length));
-
-	if (wrq->u.data.length != EEPROM_SIZE)
-	{
-		ate_print("%s: error length (=%d) from host\n",
-			   __FUNCTION__, wrq->u.data.length);
-		return FALSE;
-	}
-	else/* (wrq->u.data.length == EEPROM_SIZE) */
-	{
-		/* zero the e2p buffer */
-		NdisZeroMemory((PUCHAR)WriteEEPROM, EEPROM_SIZE);
-
-		/* fill the local buffer */
-		NdisMoveMemory((PUCHAR)WriteEEPROM, wrq->u.data.pointer, wrq->u.data.length);
-
-		do
-		{
-				/* write the content of .bin file to EEPROM */
-				rt_ee_write_all(pAd, WriteEEPROM);
-
-		} while(FALSE);
-		}
-
-    ATEDBGPRINT(RT_DEBUG_TRACE, ("<=== %s\n", __FUNCTION__));
-
-    return TRUE;
-
-}
-#endif // !UCOS //
-
-INT Set_ATE_Read_E2P_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	USHORT buffer[EEPROM_SIZE/2];
-	USHORT *p;
-	int i;
-
-	rt_ee_read_all(pAd, (USHORT *)buffer);
-	p = buffer;
-	for (i = 0; i < (EEPROM_SIZE/2); i++)
-	{
-		ate_print("%4.4x ", *p);
-		if (((i+1) % 16) == 0)
-			ate_print("\n");
-		p++;
-	}
-	return TRUE;
-}
-
-INT	Set_ATE_Show_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ate_print("Mode=%d\n", pAd->ate.Mode);
-	ate_print("TxPower0=%d\n", pAd->ate.TxPower0);
-	ate_print("TxPower1=%d\n", pAd->ate.TxPower1);
-	ate_print("TxAntennaSel=%d\n", pAd->ate.TxAntennaSel);
-	ate_print("RxAntennaSel=%d\n", pAd->ate.RxAntennaSel);
-	ate_print("BBPCurrentBW=%d\n", pAd->ate.TxWI.BW);
-	ate_print("GI=%d\n", pAd->ate.TxWI.ShortGI);
-	ate_print("MCS=%d\n", pAd->ate.TxWI.MCS);
-	ate_print("TxMode=%d\n", pAd->ate.TxWI.PHYMODE);
-	ate_print("Addr1=%02x:%02x:%02x:%02x:%02x:%02x\n",
-		pAd->ate.Addr1[0], pAd->ate.Addr1[1], pAd->ate.Addr1[2], pAd->ate.Addr1[3], pAd->ate.Addr1[4], pAd->ate.Addr1[5]);
-	ate_print("Addr2=%02x:%02x:%02x:%02x:%02x:%02x\n",
-		pAd->ate.Addr2[0], pAd->ate.Addr2[1], pAd->ate.Addr2[2], pAd->ate.Addr2[3], pAd->ate.Addr2[4], pAd->ate.Addr2[5]);
-	ate_print("Addr3=%02x:%02x:%02x:%02x:%02x:%02x\n",
-		pAd->ate.Addr3[0], pAd->ate.Addr3[1], pAd->ate.Addr3[2], pAd->ate.Addr3[3], pAd->ate.Addr3[4], pAd->ate.Addr3[5]);
-	ate_print("Channel=%d\n", pAd->ate.Channel);
-	ate_print("TxLength=%d\n", pAd->ate.TxLength);
-	ate_print("TxCount=%u\n", pAd->ate.TxCount);
-	ate_print("RFFreqOffset=%d\n", pAd->ate.RFFreqOffset);
-	ate_print(KERN_EMERG "Set_ATE_Show_Proc Success\n");
-	return TRUE;
-}
-
-INT	Set_ATE_Help_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ate_print("ATE=ATESTART, ATESTOP, TXCONT, TXCARR, TXFRAME, RXFRAME\n");
-	ate_print("ATEDA\n");
-	ate_print("ATESA\n");
-	ate_print("ATEBSSID\n");
-	ate_print("ATECHANNEL, range:0~14(unless A band !)\n");
-	ate_print("ATETXPOW0, set power level of antenna 1.\n");
-	ate_print("ATETXPOW1, set power level of antenna 2.\n");
-	ate_print("ATETXANT, set TX antenna. 0:all, 1:antenna one, 2:antenna two.\n");
-	ate_print("ATERXANT, set RX antenna.0:all, 1:antenna one, 2:antenna two, 3:antenna three.\n");
-	ate_print("ATETXFREQOFFSET, set frequency offset, range 0~63\n");
-	ate_print("ATETXBW, set BandWidth, 0:20MHz, 1:40MHz.\n");
-	ate_print("ATETXLEN, set Frame length, range 24~%d\n", (MAX_FRAME_SIZE - 34/* == 2312 */));
-	ate_print("ATETXCNT, set how many frame going to transmit.\n");
-	ate_print("ATETXMCS, set MCS, reference to rate table.\n");
-	ate_print("ATETXMODE, set Mode 0:CCK, 1:OFDM, 2:HT-Mix, 3:GreenField, reference to rate table.\n");
-	ate_print("ATETXGI, set GI interval, 0:Long, 1:Short\n");
-	ate_print("ATERXFER, 0:disable Rx Frame error rate. 1:enable Rx Frame error rate.\n");
-	ate_print("ATERRF, show all RF registers.\n");
-	ate_print("ATEWRF1, set RF1 register.\n");
-	ate_print("ATEWRF2, set RF2 register.\n");
-	ate_print("ATEWRF3, set RF3 register.\n");
-	ate_print("ATEWRF4, set RF4 register.\n");
-	ate_print("ATELDE2P, load EEPROM from .bin file.\n");
-	ate_print("ATERE2P, display all EEPROM content.\n");
-	ate_print("ATESHOW, display all parameters of ATE.\n");
-	ate_print("ATEHELP, online help.\n");
-
-	return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	AsicSwitchChannel() dedicated for ATE.
-
-    ==========================================================================
-*/
-VOID ATEAsicSwitchChannel(
-    IN PRTMP_ADAPTER pAd)
-{
-	UINT32 R2 = 0, R3 = DEFAULT_RF_TX_POWER, R4 = 0, Value = 0;
-	CHAR TxPwer = 0, TxPwer2 = 0;
-	UCHAR index, BbpValue = 0, R66 = 0x30;
-	RTMP_RF_REGS *RFRegTable;
-	UCHAR Channel;
-
-#ifdef RALINK_28xx_QA
-	if ((pAd->ate.bQATxStart == TRUE) || (pAd->ate.bQARxStart == TRUE))
-	{
-		if (pAd->ate.Channel != pAd->LatchRfRegs.Channel)
-		{
-			pAd->ate.Channel = pAd->LatchRfRegs.Channel;
-		}
-		return;
-	}
-	else
-#endif // RALINK_28xx_QA //
-	Channel = pAd->ate.Channel;
-
-	// Select antenna
-	AsicAntennaSelect(pAd, Channel);
-
-	// fill Tx power value
-	TxPwer = pAd->ate.TxPower0;
-	TxPwer2 = pAd->ate.TxPower1;
-#ifdef RT30xx
-//2008/07/10:KH add to support 3070 ATE<--
-
-	// The RF programming sequence is difference between 3xxx and 2xxx
-	// The 3070 is 1T1R. Therefore, we don't need to set the number of Tx/Rx path and the only job is to set the parameters of channels.
-	if (IS_RT30xx(pAd) && ((pAd->RfIcType == RFIC_3020) ||
-(pAd->RfIcType == RFIC_3021) || (pAd->RfIcType == RFIC_3022) ||
-(pAd->RfIcType == RFIC_2020)))
-	{
-		/* modify by WY for Read RF Reg. error */
-		UCHAR RFValue;
-
-		for (index = 0; index < NUM_OF_3020_CHNL; index++)
-		{
-			if (Channel == FreqItems3020[index].Channel)
-			{
-				// Programming channel parameters
-				RT30xxWriteRFRegister(pAd, RF_R02, FreqItems3020[index].N);
-				RT30xxWriteRFRegister(pAd, RF_R03, FreqItems3020[index].K);
-
-				RT30xxReadRFRegister(pAd, RF_R06, (PUCHAR)&RFValue);
-				RFValue = (RFValue & 0xFC) | FreqItems3020[index].R;
-				RT30xxWriteRFRegister(pAd, RF_R06, (UCHAR)RFValue);
-
-				// Set Tx Power
-				RT30xxReadRFRegister(pAd, RF_R12, (PUCHAR)&RFValue);
-				RFValue = (RFValue & 0xE0) | TxPwer;
-				RT30xxWriteRFRegister(pAd, RF_R12, (UCHAR)RFValue);
-
-				// Set RF offset
-				RT30xxReadRFRegister(pAd, RF_R23, (PUCHAR)&RFValue);
-				//2008/08/06: KH modified "pAd->RFFreqOffset" to "pAd->ate.RFFreqOffset"
-				RFValue = (RFValue & 0x80) | pAd->ate.RFFreqOffset;
-				RT30xxWriteRFRegister(pAd, RF_R23, (UCHAR)RFValue);
-
-				// Set BW
-				if (pAd->ate.TxWI.BW == BW_40)
-				{
-					RFValue = pAd->Mlme.CaliBW40RfR24;
-					//DISABLE_11N_CHECK(pAd);
-				}
-				else
-				{
-					RFValue = pAd->Mlme.CaliBW20RfR24;
-				}
-				RT30xxWriteRFRegister(pAd, RF_R24, (UCHAR)RFValue);
-
-				// Enable RF tuning
-				RT30xxReadRFRegister(pAd, RF_R07, (PUCHAR)&RFValue);
-				RFValue = RFValue | 0x1;
-				RT30xxWriteRFRegister(pAd, RF_R07, (UCHAR)RFValue);
-
-				// latch channel for future usage.
-				pAd->LatchRfRegs.Channel = Channel;
-
-				break;
-			}
-		}
-
-		DBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, Pwr0=%d, Pwr1=%d, %dT), N=0x%02X, K=0x%02X, R=0x%02X\n",
-			Channel,
-			pAd->RfIcType,
-			TxPwer,
-			TxPwer2,
-			pAd->Antenna.field.TxPath,
-			FreqItems3020[index].N,
-			FreqItems3020[index].K,
-			FreqItems3020[index].R));
-	}
-	else
-//2008/07/10:KH add to support 3070 ATE-->
-#endif // RT30xx //
-{
-	RFRegTable = RF2850RegTable;
-
-	switch (pAd->RfIcType)
-	{
-		/* But only 2850 and 2750 support 5.5GHz band... */
-		case RFIC_2820:
-		case RFIC_2850:
-		case RFIC_2720:
-		case RFIC_2750:
-
-			for (index = 0; index < NUM_OF_2850_CHNL; index++)
-			{
-				if (Channel == RFRegTable[index].Channel)
-				{
-					R2 = RFRegTable[index].R2;
-					if (pAd->Antenna.field.TxPath == 1)
-					{
-						R2 |= 0x4000;	// If TXpath is 1, bit 14 = 1;
-					}
-
-					if (pAd->Antenna.field.RxPath == 2)
-					{
-						switch (pAd->ate.RxAntennaSel)
-						{
-							case 1:
-								R2 |= 0x20040;
-								ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
-								BbpValue &= 0xE4;
-								BbpValue |= 0x00;
-								ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
-								break;
-							case 2:
-								R2 |= 0x10040;
-								ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
-								BbpValue &= 0xE4;
-								BbpValue |= 0x01;
-								ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
-								break;
-							default:
-								R2 |= 0x40;
-								ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
-								BbpValue &= 0xE4;
-								/* Only enable two Antenna to receive. */
-								BbpValue |= 0x08;
-								ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
-								break;
-						}
-					}
-					else if (pAd->Antenna.field.RxPath == 1)
-					{
-						R2 |= 0x20040;	// write 1 to off RxPath
-					}
-
-					if (pAd->Antenna.field.TxPath == 2)
-					{
-						if (pAd->ate.TxAntennaSel == 1)
-						{
-							R2 |= 0x4000;	// If TX Antenna select is 1 , bit 14 = 1; Disable Ant 2
-							ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BbpValue);
-							BbpValue &= 0xE7;		//11100111B
-							ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BbpValue);
-						}
-						else if (pAd->ate.TxAntennaSel == 2)
-						{
-							R2 |= 0x8000;	// If TX Antenna select is 2 , bit 15 = 1; Disable Ant 1
-							ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BbpValue);
-							BbpValue &= 0xE7;
-							BbpValue |= 0x08;
-							ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BbpValue);
-						}
-						else
-						{
-							ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BbpValue);
-							BbpValue &= 0xE7;
-							BbpValue |= 0x10;
-							ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BbpValue);
-						}
-					}
-					if (pAd->Antenna.field.RxPath == 3)
-					{
-						switch (pAd->ate.RxAntennaSel)
-						{
-							case 1:
-								R2 |= 0x20040;
-								ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
-								BbpValue &= 0xE4;
-								BbpValue |= 0x00;
-								ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
-								break;
-							case 2:
-								R2 |= 0x10040;
-								ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
-								BbpValue &= 0xE4;
-								BbpValue |= 0x01;
-								ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
-								break;
-							case 3:
-								R2 |= 0x30000;
-								ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
-								BbpValue &= 0xE4;
-								BbpValue |= 0x02;
-								ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
-								break;
-							default:
-								ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
-								BbpValue &= 0xE4;
-								BbpValue |= 0x10;
-								ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
-								break;
-						}
-					}
-
-					if (Channel > 14)
-					{
-						// initialize R3, R4
-						R3 = (RFRegTable[index].R3 & 0xffffc1ff);
-						R4 = (RFRegTable[index].R4 & (~0x001f87c0)) | (pAd->ate.RFFreqOffset << 15);
-
-                        // According the Rory's suggestion to solve the middle range issue.
-						// 5.5G band power range: 0xF9~0X0F, TX0 Reg3 bit9/TX1 Reg4 bit6="0" means the TX power reduce 7dB
-						// R3
-						if ((TxPwer >= -7) && (TxPwer < 0))
-						{
-							TxPwer = (7+TxPwer);
-							TxPwer = (TxPwer > 0xF) ? (0xF) : (TxPwer);
-							R3 |= (TxPwer << 10);
-							ATEDBGPRINT(RT_DEBUG_TRACE, ("ATEAsicSwitchChannel: TxPwer=%d \n", TxPwer));
-						}
-						else
-						{
-							TxPwer = (TxPwer > 0xF) ? (0xF) : (TxPwer);
-							R3 |= (TxPwer << 10) | (1 << 9);
-						}
-
-						// R4
-						if ((TxPwer2 >= -7) && (TxPwer2 < 0))
-						{
-							TxPwer2 = (7+TxPwer2);
-							TxPwer2 = (TxPwer2 > 0xF) ? (0xF) : (TxPwer2);
-							R4 |= (TxPwer2 << 7);
-							ATEDBGPRINT(RT_DEBUG_TRACE, ("ATEAsicSwitchChannel: TxPwer2=%d \n", TxPwer2));
-						}
-						else
-						{
-							TxPwer2 = (TxPwer2 > 0xF) ? (0xF) : (TxPwer2);
-							R4 |= (TxPwer2 << 7) | (1 << 6);
-						}
-					}
-					else
-					{
-						R3 = (RFRegTable[index].R3 & 0xffffc1ff) | (TxPwer << 9); // set TX power0
-						R4 = (RFRegTable[index].R4 & (~0x001f87c0)) | (pAd->ate.RFFreqOffset << 15) | (TxPwer2 <<6);// Set freq offset & TxPwr1
-					}
-
-					// Based on BBP current mode before changing RF channel.
-					if (pAd->ate.TxWI.BW == BW_40)
-					{
-						R4 |=0x200000;
-					}
-
-					// Update variables
-					pAd->LatchRfRegs.Channel = Channel;
-					pAd->LatchRfRegs.R1 = RFRegTable[index].R1;
-					pAd->LatchRfRegs.R2 = R2;
-					pAd->LatchRfRegs.R3 = R3;
-					pAd->LatchRfRegs.R4 = R4;
-
-					RtmpRfIoWrite(pAd);
-
-					break;
-				}
-			}
-			break;
-
-		default:
-			break;
-	}
-}
-	// Change BBP setting during switch from a->g, g->a
-	if (Channel <= 14)
-	{
-	    ULONG	TxPinCfg = 0x00050F0A;// 2007.10.09 by Brian : 0x0005050A ==> 0x00050F0A
-
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R62, (0x37 - GET_LNA_GAIN(pAd)));
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R63, (0x37 - GET_LNA_GAIN(pAd)));
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R64, (0x37 - GET_LNA_GAIN(pAd)));
-
-		/* For 1T/2R chip only... */
-	    if (pAd->NicConfig2.field.ExternalLNAForG)
-	    {
-	        ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0x62);
-	    }
-	    else
-	    {
-	        ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0x84);
-	    }
-
-        // According the Rory's suggestion to solve the middle range issue.
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R86, &BbpValue);
-		ASSERT((BbpValue == 0x00));
-		if ((BbpValue != 0x00))
-		{
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0x00);
-		}
-
-		// 5.5GHz band selection PIN, bit1 and bit2 are complement
-		RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
-		Value &= (~0x6);
-		Value |= (0x04);
-		RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
-
-        // Turn off unused PA or LNA when only 1T or 1R.
-		if (pAd->Antenna.field.TxPath == 1)
-		{
-			TxPinCfg &= 0xFFFFFFF3;
-		}
-		if (pAd->Antenna.field.RxPath == 1)
-		{
-			TxPinCfg &= 0xFFFFF3FF;
-		}
-
-		RTMP_IO_WRITE32(pAd, TX_PIN_CFG, TxPinCfg);
-	}
-	else
-	{
-	    ULONG	TxPinCfg = 0x00050F05;//2007.10.09 by Brian : 0x00050505 ==> 0x00050F05
-
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R62, (0x37 - GET_LNA_GAIN(pAd)));
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R63, (0x37 - GET_LNA_GAIN(pAd)));
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R64, (0x37 - GET_LNA_GAIN(pAd)));
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0xF2);
-
-        // According the Rory's suggestion to solve the middle range issue.
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R86, &BbpValue);
-		ASSERT((BbpValue == 0x00));
-		if ((BbpValue != 0x00))
-		{
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0x00);
-		}
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R91, &BbpValue);
-		ASSERT((BbpValue == 0x04));
-
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R92, &BbpValue);
-		ASSERT((BbpValue == 0x00));
-
-		// 5.5GHz band selection PIN, bit1 and bit2 are complement
-		RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
-		Value &= (~0x6);
-		Value |= (0x02);
-		RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
-
-        // Turn off unused PA or LNA when only 1T or 1R.
-		if (pAd->Antenna.field.TxPath == 1)
-		{
-			TxPinCfg &= 0xFFFFFFF3;
-	    }
-		if (pAd->Antenna.field.RxPath == 1)
-		{
-			TxPinCfg &= 0xFFFFF3FF;
-		}
-
-		RTMP_IO_WRITE32(pAd, TX_PIN_CFG, TxPinCfg);
-	}
-
-    // R66 should be set according to Channel and use 20MHz when scanning
-	if (Channel <= 14)
-	{
-		// BG band
-		R66 = 0x2E + GET_LNA_GAIN(pAd);
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-	}
-	else
-	{
-		// 5.5 GHz band
-		if (pAd->ate.TxWI.BW == BW_20)
-		{
-			R66 = (UCHAR)(0x32 + (GET_LNA_GAIN(pAd)*5)/3);
-    		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-		}
-		else
-		{
-			R66 = (UCHAR)(0x3A + (GET_LNA_GAIN(pAd)*5)/3);
-			ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-		}
-	}
-
-	//
-	// On 11A, We should delay and wait RF/BBP to be stable
-	// and the appropriate time should be 1000 micro seconds
-	// 2005/06/05 - On 11G, We also need this delay time. Otherwise it's difficult to pass the WHQL.
-	//
-	RTMPusecDelay(1000);
-
-	if (Channel > 14)
-	{
-		// When 5.5GHz band the LSB of TxPwr will be used to reduced 7dB or not.
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, %dT) to , R1=0x%08lx, R2=0x%08lx, R3=0x%08lx, R4=0x%08lx\n",
-								  Channel,
-								  pAd->RfIcType,
-								  pAd->Antenna.field.TxPath,
-								  pAd->LatchRfRegs.R1,
-								  pAd->LatchRfRegs.R2,
-								  pAd->LatchRfRegs.R3,
-								  pAd->LatchRfRegs.R4));
-	}
-	else
-	{
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, Pwr0=%u, Pwr1=%u, %dT) to , R1=0x%08lx, R2=0x%08lx, R3=0x%08lx, R4=0x%08lx\n",
-								  Channel,
-								  pAd->RfIcType,
-								  (R3 & 0x00003e00) >> 9,
-								  (R4 & 0x000007c0) >> 6,
-								  pAd->Antenna.field.TxPath,
-								  pAd->LatchRfRegs.R1,
-								  pAd->LatchRfRegs.R2,
-								  pAd->LatchRfRegs.R3,
-								  pAd->LatchRfRegs.R4));
-    }
-}
-
-//
-// In fact, no one will call this routine so far !
-//
-/*
-	==========================================================================
-	Description:
-		Gives CCK TX rate 2 more dB TX power.
-		This routine works only in ATE mode.
-
-		calculate desired Tx power in RF R3.Tx0~5,	should consider -
-		0. if current radio is a noisy environment (pAd->DrsCounters.fNoisyEnvironment)
-		1. TxPowerPercentage
-		2. auto calibration based on TSSI feedback
-		3. extra 2 db for CCK
-		4. -10 db upon very-short distance (AvgRSSI >= -40db) to AP
-
-	NOTE: Since this routine requires the value of (pAd->DrsCounters.fNoisyEnvironment),
-		it should be called AFTER MlmeDynamicTxRateSwitching()
-	==========================================================================
- */
-VOID ATEAsicAdjustTxPower(
-	IN PRTMP_ADAPTER pAd)
-{
-	INT			i, j;
-	CHAR		DeltaPwr = 0;
-	BOOLEAN		bAutoTxAgc = FALSE;
-	UCHAR		TssiRef, *pTssiMinusBoundary, *pTssiPlusBoundary, TxAgcStep;
-	UCHAR		BbpR49 = 0, idx;
-	PCHAR		pTxAgcCompensate;
-	ULONG		TxPwr[5];
-	CHAR		Value;
-
-	/* no one calls this procedure so far */
-	if (pAd->ate.TxWI.BW == BW_40)
-	{
-		if (pAd->ate.Channel > 14)
-		{
-			TxPwr[0] = pAd->Tx40MPwrCfgABand[0];
-			TxPwr[1] = pAd->Tx40MPwrCfgABand[1];
-			TxPwr[2] = pAd->Tx40MPwrCfgABand[2];
-			TxPwr[3] = pAd->Tx40MPwrCfgABand[3];
-			TxPwr[4] = pAd->Tx40MPwrCfgABand[4];
-		}
-		else
-		{
-			TxPwr[0] = pAd->Tx40MPwrCfgGBand[0];
-			TxPwr[1] = pAd->Tx40MPwrCfgGBand[1];
-			TxPwr[2] = pAd->Tx40MPwrCfgGBand[2];
-			TxPwr[3] = pAd->Tx40MPwrCfgGBand[3];
-			TxPwr[4] = pAd->Tx40MPwrCfgGBand[4];
-		}
-	}
-	else
-	{
-		if (pAd->ate.Channel > 14)
-		{
-			TxPwr[0] = pAd->Tx20MPwrCfgABand[0];
-			TxPwr[1] = pAd->Tx20MPwrCfgABand[1];
-			TxPwr[2] = pAd->Tx20MPwrCfgABand[2];
-			TxPwr[3] = pAd->Tx20MPwrCfgABand[3];
-			TxPwr[4] = pAd->Tx20MPwrCfgABand[4];
-		}
-		else
-		{
-			TxPwr[0] = pAd->Tx20MPwrCfgGBand[0];
-			TxPwr[1] = pAd->Tx20MPwrCfgGBand[1];
-			TxPwr[2] = pAd->Tx20MPwrCfgGBand[2];
-			TxPwr[3] = pAd->Tx20MPwrCfgGBand[3];
-			TxPwr[4] = pAd->Tx20MPwrCfgGBand[4];
-		}
-	}
-
-	// TX power compensation for temperature variation based on TSSI.
-	// Do it per 4 seconds.
-	if (pAd->Mlme.OneSecPeriodicRound % 4 == 0)
-	{
-		if (pAd->ate.Channel <= 14)
-		{
-			/* bg channel */
-			bAutoTxAgc         = pAd->bAutoTxAgcG;
-			TssiRef            = pAd->TssiRefG;
-			pTssiMinusBoundary = &pAd->TssiMinusBoundaryG[0];
-			pTssiPlusBoundary  = &pAd->TssiPlusBoundaryG[0];
-			TxAgcStep          = pAd->TxAgcStepG;
-			pTxAgcCompensate   = &pAd->TxAgcCompensateG;
-		}
-		else
-		{
-			/* a channel */
-			bAutoTxAgc         = pAd->bAutoTxAgcA;
-			TssiRef            = pAd->TssiRefA;
-			pTssiMinusBoundary = &pAd->TssiMinusBoundaryA[0];
-			pTssiPlusBoundary  = &pAd->TssiPlusBoundaryA[0];
-			TxAgcStep          = pAd->TxAgcStepA;
-			pTxAgcCompensate   = &pAd->TxAgcCompensateA;
-		}
-
-		if (bAutoTxAgc)
-		{
-			/* BbpR49 is unsigned char */
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R49, &BbpR49);
-
-			/* (p) TssiPlusBoundaryG[0] = 0 = (m) TssiMinusBoundaryG[0] */
-			/* compensate: +4     +3   +2   +1    0   -1   -2   -3   -4 * steps */
-			/* step value is defined in pAd->TxAgcStepG for tx power value */
-
-			/* [4]+1+[4]   p4     p3   p2   p1   o1   m1   m2   m3   m4 */
-			/* ex:         0x00 0x15 0x25 0x45 0x88 0xA0 0xB5 0xD0 0xF0
-			   above value are examined in mass factory production */
-			/*             [4]    [3]  [2]  [1]  [0]  [1]  [2]  [3]  [4] */
-
-			/* plus is 0x10 ~ 0x40, minus is 0x60 ~ 0x90 */
-			/* if value is between p1 ~ o1 or o1 ~ s1, no need to adjust tx power */
-			/* if value is 0x65, tx power will be -= TxAgcStep*(2-1) */
-
-			if (BbpR49 > pTssiMinusBoundary[1])
-			{
-				// Reading is larger than the reference value.
-				// Check for how large we need to decrease the Tx power.
-				for (idx = 1; idx < 5; idx++)
-				{
-					if (BbpR49 <= pTssiMinusBoundary[idx])  // Found the range
-						break;
-				}
-				// The index is the step we should decrease, idx = 0 means there is nothing to compensate
-//				if (R3 > (ULONG) (TxAgcStep * (idx-1)))
-					*pTxAgcCompensate = -(TxAgcStep * (idx-1));
-//				else
-//					*pTxAgcCompensate = -((UCHAR)R3);
-
-				DeltaPwr += (*pTxAgcCompensate);
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("-- Tx Power, BBP R1=%x, TssiRef=%x, TxAgcStep=%x, step = -%d\n",
-					BbpR49, TssiRef, TxAgcStep, idx-1));
-			}
-			else if (BbpR49 < pTssiPlusBoundary[1])
-			{
-				// Reading is smaller than the reference value
-				// check for how large we need to increase the Tx power
-				for (idx = 1; idx < 5; idx++)
-				{
-					if (BbpR49 >= pTssiPlusBoundary[idx])   // Found the range
-						break;
-				}
-				// The index is the step we should increase, idx = 0 means there is nothing to compensate
-				*pTxAgcCompensate = TxAgcStep * (idx-1);
-				DeltaPwr += (*pTxAgcCompensate);
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("++ Tx Power, BBP R1=%x, TssiRef=%x, TxAgcStep=%x, step = +%d\n",
-					BbpR49, TssiRef, TxAgcStep, idx-1));
-			}
-			else
-			{
-				*pTxAgcCompensate = 0;
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("   Tx Power, BBP R1=%x, TssiRef=%x, TxAgcStep=%x, step = +%d\n",
-					BbpR49, TssiRef, TxAgcStep, 0));
-			}
-		}
-	}
-	else
-	{
-		if (pAd->ate.Channel <= 14)
-		{
-			bAutoTxAgc         = pAd->bAutoTxAgcG;
-			pTxAgcCompensate   = &pAd->TxAgcCompensateG;
-		}
-		else
-		{
-			bAutoTxAgc         = pAd->bAutoTxAgcA;
-			pTxAgcCompensate   = &pAd->TxAgcCompensateA;
-		}
-
-		if (bAutoTxAgc)
-			DeltaPwr += (*pTxAgcCompensate);
-	}
-
-	/* calculate delta power based on the percentage specified from UI */
-	// E2PROM setting is calibrated for maximum TX power (i.e. 100%)
-	// We lower TX power here according to the percentage specified from UI
-	if (pAd->CommonCfg.TxPowerPercentage == 0xffffffff)       // AUTO TX POWER control
-		;
-	else if (pAd->CommonCfg.TxPowerPercentage > 90)  // 91 ~ 100% & AUTO, treat as 100% in terms of mW
-		;
-	else if (pAd->CommonCfg.TxPowerPercentage > 60)  // 61 ~ 90%, treat as 75% in terms of mW
-	{
-		DeltaPwr -= 1;
-	}
-	else if (pAd->CommonCfg.TxPowerPercentage > 30)  // 31 ~ 60%, treat as 50% in terms of mW
-	{
-		DeltaPwr -= 3;
-	}
-	else if (pAd->CommonCfg.TxPowerPercentage > 15)  // 16 ~ 30%, treat as 25% in terms of mW
-	{
-		DeltaPwr -= 6;
-	}
-	else if (pAd->CommonCfg.TxPowerPercentage > 9)   // 10 ~ 15%, treat as 12.5% in terms of mW
-	{
-		DeltaPwr -= 9;
-	}
-	else                                           // 0 ~ 9 %, treat as MIN(~3%) in terms of mW
-	{
-		DeltaPwr -= 12;
-	}
-
-	/* reset different new tx power for different TX rate */
-	for(i=0; i<5; i++)
-	{
-		if (TxPwr[i] != 0xffffffff)
-		{
-			for (j=0; j<8; j++)
-			{
-				Value = (CHAR)((TxPwr[i] >> j*4) & 0x0F); /* 0 ~ 15 */
-
-				if ((Value + DeltaPwr) < 0)
-				{
-					Value = 0; /* min */
-				}
-				else if ((Value + DeltaPwr) > 0xF)
-				{
-					Value = 0xF; /* max */
-				}
-				else
-				{
-					Value += DeltaPwr; /* temperature compensation */
-				}
-
-				/* fill new value to CSR offset */
-				TxPwr[i] = (TxPwr[i] & ~(0x0000000F << j*4)) | (Value << j*4);
-			}
-
-			/* write tx power value to CSR */
-			/* TX_PWR_CFG_0 (8 tx rate) for	TX power for OFDM 12M/18M
-											TX power for OFDM 6M/9M
-											TX power for CCK5.5M/11M
-											TX power for CCK1M/2M */
-			/* TX_PWR_CFG_1 ~ TX_PWR_CFG_4 */
-			RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, TxPwr[i]);
-
-
-		}
-	}
-
-}
-
-/*
-	========================================================================
-	Routine Description:
-		Write TxWI for ATE mode.
-
-	Return Value:
-		None
-	========================================================================
-*/
-
-#ifdef RT2870
-static VOID ATEWriteTxWI(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PTXWI_STRUC 	pTxWI,
-	IN	BOOLEAN			FRAG,
-	IN	BOOLEAN			InsTimestamp,
-	IN	BOOLEAN 		AMPDU,
-	IN	BOOLEAN 		Ack,
-	IN	BOOLEAN 		NSeq,		// HW new a sequence.
-	IN	UCHAR			BASize,
-	IN	UCHAR			WCID,
-	IN	ULONG			Length,
-	IN	UCHAR 			PID,
-	IN	UCHAR			MIMOps,
-	IN	UCHAR			Txopmode,
-	IN	BOOLEAN			CfAck,
-	IN	HTTRANSMIT_SETTING	Transmit)
-{
-	//
-	// Always use Long preamble before verifiation short preamble functionality works well.
-	// Todo: remove the following line if short preamble functionality works
-	//
-	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
-	pTxWI->FRAG= FRAG;
-	pTxWI->TS= InsTimestamp;
-	pTxWI->AMPDU = AMPDU;
-
-	pTxWI->MIMOps = PWR_ACTIVE;
-	pTxWI->MpduDensity = 4;
-	pTxWI->ACK = Ack;
-	pTxWI->txop = Txopmode;
-	pTxWI->NSEQ = NSeq;
-	pTxWI->BAWinSize = BASize;
-
-	pTxWI->WirelessCliID = WCID;
-	pTxWI->MPDUtotalByteCount = Length;
-	pTxWI->PacketId = PID;
-
-	pTxWI->BW = Transmit.field.BW;
-	pTxWI->ShortGI = Transmit.field.ShortGI;
-	pTxWI->STBC= Transmit.field.STBC;
-
-	pTxWI->MCS = Transmit.field.MCS;
-	pTxWI->PHYMODE= Transmit.field.MODE;
-
-#ifdef DOT11_N_SUPPORT
-	//
-	// MMPS is 802.11n features. Because TxWI->MCS > 7 must be HT mode,
-	// so need not check if it's HT rate.
-	//
-	if ((MIMOps == MMPS_STATIC) && (pTxWI->MCS > 7))
-		pTxWI->MCS = 7;
-
-	if ((MIMOps == MMPS_DYNAMIC) && (pTxWI->MCS > 7)) // SMPS protect 2 spatial.
-		pTxWI->MIMOps = 1;
-#endif // DOT11_N_SUPPORT //
-
-	pTxWI->CFACK = CfAck;
-
-	return;
-}
-#endif // RT2870 //
-/*
-	========================================================================
-
-	Routine Description:
-		Disable protection for ATE.
-	========================================================================
-*/
-VOID ATEDisableAsicProtect(
-	IN		PRTMP_ADAPTER	pAd)
-{
-	PROT_CFG_STRUC	ProtCfg, ProtCfg4;
-	UINT32 Protect[6];
-	USHORT			offset;
-	UCHAR			i;
-	UINT32 MacReg = 0;
-
-	// Config ASIC RTS threshold register
-	RTMP_IO_READ32(pAd, TX_RTS_CFG, &MacReg);
-	MacReg &= 0xFF0000FF;
-	MacReg |= (pAd->CommonCfg.RtsThreshold << 8);
-	RTMP_IO_WRITE32(pAd, TX_RTS_CFG, MacReg);
-
-	// Initial common protection settings
-	RTMPZeroMemory(Protect, sizeof(Protect));
-	ProtCfg4.word = 0;
-	ProtCfg.word = 0;
-	ProtCfg.field.TxopAllowGF40 = 1;
-	ProtCfg.field.TxopAllowGF20 = 1;
-	ProtCfg.field.TxopAllowMM40 = 1;
-	ProtCfg.field.TxopAllowMM20 = 1;
-	ProtCfg.field.TxopAllowOfdm = 1;
-	ProtCfg.field.TxopAllowCck = 1;
-	ProtCfg.field.RTSThEn = 1;
-	ProtCfg.field.ProtectNav = ASIC_SHORTNAV;
-
-	// Handle legacy(B/G) protection
-	ProtCfg.field.ProtectRate = pAd->CommonCfg.RtsRate;
-	ProtCfg.field.ProtectCtrl = 0;
-	Protect[0] = ProtCfg.word;
-	Protect[1] = ProtCfg.word;
-
-	// NO PROTECT
-	// 1.All STAs in the BSS are 20/40 MHz HT
-	// 2. in ai 20/40MHz BSS
-	// 3. all STAs are 20MHz in a 20MHz BSS
-	// Pure HT. no protection.
-
-	// MM20_PROT_CFG
-	//	Reserved (31:27)
-	// 	PROT_TXOP(25:20) -- 010111
-	//	PROT_NAV(19:18)  -- 01 (Short NAV protection)
-	//  PROT_CTRL(17:16) -- 00 (None)
-	// 	PROT_RATE(15:0)  -- 0x4004 (OFDM 24M)
-	Protect[2] = 0x01744004;
-
-	// MM40_PROT_CFG
-	//	Reserved (31:27)
-	// 	PROT_TXOP(25:20) -- 111111
-	//	PROT_NAV(19:18)  -- 01 (Short NAV protection)
-	//  PROT_CTRL(17:16) -- 00 (None)
-	// 	PROT_RATE(15:0)  -- 0x4084 (duplicate OFDM 24M)
-	Protect[3] = 0x03f44084;
-
-	// CF20_PROT_CFG
-	//	Reserved (31:27)
-	// 	PROT_TXOP(25:20) -- 010111
-	//	PROT_NAV(19:18)  -- 01 (Short NAV protection)
-	//  PROT_CTRL(17:16) -- 00 (None)
-	// 	PROT_RATE(15:0)  -- 0x4004 (OFDM 24M)
-	Protect[4] = 0x01744004;
-
-	// CF40_PROT_CFG
-	//	Reserved (31:27)
-	// 	PROT_TXOP(25:20) -- 111111
-	//	PROT_NAV(19:18)  -- 01 (Short NAV protection)
-	//  PROT_CTRL(17:16) -- 00 (None)
-	// 	PROT_RATE(15:0)  -- 0x4084 (duplicate OFDM 24M)
-	Protect[5] = 0x03f44084;
-
-	pAd->CommonCfg.IOTestParm.bRTSLongProtOn = FALSE;
-
-	offset = CCK_PROT_CFG;
-	for (i = 0;i < 6;i++)
-		RTMP_IO_WRITE32(pAd, offset + i*4, Protect[i]);
-
-}
-
-#ifdef RT2870
-/*
-	========================================================================
-	Routine	Description:
-		Write TxInfo for ATE mode.
-
-	Return Value:
-		None
-	========================================================================
-*/
-static VOID ATEWriteTxInfo(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PTXINFO_STRUC 	pTxInfo,
-	IN	USHORT		USBDMApktLen,
-	IN	BOOLEAN		bWiv,
-	IN	UCHAR			QueueSel,
-	IN	UCHAR			NextValid,
-	IN	UCHAR			TxBurst)
-{
-	pTxInfo->USBDMATxPktLen = USBDMApktLen;
-	pTxInfo->QSEL = QueueSel;
-
-	if (QueueSel != FIFO_EDCA)
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("=======> QueueSel != FIFO_EDCA<=======\n"));
-
-	pTxInfo->USBDMANextVLD = NextValid;
-	pTxInfo->USBDMATxburst = TxBurst;
-	pTxInfo->WIV = bWiv;
-	pTxInfo->SwUseLastRound = 0;
-	pTxInfo->rsv = 0;
-	pTxInfo->rsv2 = 0;
-
-	return;
-}
-#endif // RT2870 //
-
-/* There are two ways to convert Rssi */
-#if 1
-//
-// The way used with GET_LNA_GAIN().
-//
-CHAR ATEConvertToRssi(
-	IN PRTMP_ADAPTER pAd,
-	IN	CHAR	Rssi,
-	IN  UCHAR   RssiNumber)
-{
-	UCHAR	RssiOffset, LNAGain;
-
-	// Rssi equals to zero should be an invalid value
-	if (Rssi == 0)
-		return -99;
-
-	LNAGain = GET_LNA_GAIN(pAd);
-	if (pAd->LatchRfRegs.Channel > 14)
-	{
-		if (RssiNumber == 0)
-			RssiOffset = pAd->ARssiOffset0;
-		else if (RssiNumber == 1)
-			RssiOffset = pAd->ARssiOffset1;
-		else
-			RssiOffset = pAd->ARssiOffset2;
-	}
-	else
-	{
-		if (RssiNumber == 0)
-			RssiOffset = pAd->BGRssiOffset0;
-		else if (RssiNumber == 1)
-			RssiOffset = pAd->BGRssiOffset1;
-		else
-			RssiOffset = pAd->BGRssiOffset2;
-	}
-
-	return (-12 - RssiOffset - LNAGain - Rssi);
-}
-#else
-//
-// The way originally used in ATE of rt2860ap.
-//
-CHAR ATEConvertToRssi(
-	IN PRTMP_ADAPTER pAd,
-	IN	CHAR			Rssi,
-	IN  UCHAR   RssiNumber)
-{
-	UCHAR	RssiOffset, LNAGain;
-
-	// Rssi equals to zero should be an invalid value
-	if (Rssi == 0)
-		return -99;
-
-    if (pAd->LatchRfRegs.Channel > 14)
-    {
-        LNAGain = pAd->ALNAGain;
-        if (RssiNumber == 0)
-			RssiOffset = pAd->ARssiOffset0;
-		else if (RssiNumber == 1)
-			RssiOffset = pAd->ARssiOffset1;
-		else
-			RssiOffset = pAd->ARssiOffset2;
-    }
-    else
-    {
-        LNAGain = pAd->BLNAGain;
-        if (RssiNumber == 0)
-			RssiOffset = pAd->BGRssiOffset0;
-		else if (RssiNumber == 1)
-			RssiOffset = pAd->BGRssiOffset1;
-		else
-			RssiOffset = pAd->BGRssiOffset2;
-    }
-
-    return (-32 - RssiOffset + LNAGain - Rssi);
-}
-#endif /* end of #if 1 */
-
-/*
-	========================================================================
-
-	Routine Description:
-		Set Japan filter coefficients if needed.
-	Note:
-		This routine should only be called when
-		entering TXFRAME mode or TXCONT mode.
-
-	========================================================================
-*/
-static VOID SetJapanFilter(
-	IN		PRTMP_ADAPTER	pAd)
-{
-	UCHAR			BbpData = 0;
-
-	//
-	// If Channel=14 and Bandwidth=20M and Mode=CCK, set BBP R4 bit5=1
-	// (Japan Tx filter coefficients)when (TXFRAME or TXCONT).
-	//
-	ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BbpData);
-
-    if ((pAd->ate.TxWI.PHYMODE == MODE_CCK) && (pAd->ate.Channel == 14) && (pAd->ate.TxWI.BW == BW_20))
-    {
-        BbpData |= 0x20;    // turn on
-        ATEDBGPRINT(RT_DEBUG_TRACE, ("SetJapanFilter!!!\n"));
-    }
-    else
-    {
-		BbpData &= 0xdf;    // turn off
-		ATEDBGPRINT(RT_DEBUG_TRACE, ("ClearJapanFilter!!!\n"));
-    }
-
-	ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BbpData);
-}
-
-VOID ATESampleRssi(
-	IN PRTMP_ADAPTER	pAd,
-	IN PRXWI_STRUC		pRxWI)
-{
-	/* There are two ways to collect RSSI. */
-#if 1
-	//pAd->LastRxRate = (USHORT)((pRxWI->MCS) + (pRxWI->BW <<7) + (pRxWI->ShortGI <<8)+ (pRxWI->PHYMODE <<14)) ;
-	if (pRxWI->RSSI0 != 0)
-	{
-		pAd->ate.LastRssi0	= ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI0, RSSI_0);
-		pAd->ate.AvgRssi0X8	= (pAd->ate.AvgRssi0X8 - pAd->ate.AvgRssi0) + pAd->ate.LastRssi0;
-		pAd->ate.AvgRssi0  	= pAd->ate.AvgRssi0X8 >> 3;
-	}
-	if (pRxWI->RSSI1 != 0)
-	{
-		pAd->ate.LastRssi1	= ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI1, RSSI_1);
-		pAd->ate.AvgRssi1X8	= (pAd->ate.AvgRssi1X8 - pAd->ate.AvgRssi1) + pAd->ate.LastRssi1;
-		pAd->ate.AvgRssi1	= pAd->ate.AvgRssi1X8 >> 3;
-	}
-	if (pRxWI->RSSI2 != 0)
-	{
-		pAd->ate.LastRssi2	= ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI2, RSSI_2);
-		pAd->ate.AvgRssi2X8	= (pAd->ate.AvgRssi2X8 - pAd->ate.AvgRssi2) + pAd->ate.LastRssi2;
-		pAd->ate.AvgRssi2	= pAd->ate.AvgRssi2X8 >> 3;
-	}
-
-	pAd->ate.LastSNR0 = (CHAR)(pRxWI->SNR0);// CHAR ==> UCHAR ?
-	pAd->ate.LastSNR1 = (CHAR)(pRxWI->SNR1);// CHAR ==> UCHAR ?
-
-	pAd->ate.NumOfAvgRssiSample ++;
-#else
-	pAd->ate.LastSNR0 = (CHAR)(pRxWI->SNR0);
-	pAd->ate.LastSNR1 = (CHAR)(pRxWI->SNR1);
-	pAd->ate.RxCntPerSec++;
-	pAd->ate.LastRssi0 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI0, RSSI_0);
-	pAd->ate.LastRssi1 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI1, RSSI_1);
-	pAd->ate.LastRssi2 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI2, RSSI_2);
-	pAd->ate.AvgRssi0X8 = (pAd->ate.AvgRssi0X8 - pAd->ate.AvgRssi0) + pAd->ate.LastRssi0;
-	pAd->ate.AvgRssi0 = pAd->ate.AvgRssi0X8 >> 3;
-	pAd->ate.AvgRssi1X8 = (pAd->ate.AvgRssi1X8 - pAd->ate.AvgRssi1) + pAd->ate.LastRssi1;
-	pAd->ate.AvgRssi1 = pAd->ate.AvgRssi1X8 >> 3;
-	pAd->ate.AvgRssi2X8 = (pAd->ate.AvgRssi2X8 - pAd->ate.AvgRssi2) + pAd->ate.LastRssi2;
-	pAd->ate.AvgRssi2 = pAd->ate.AvgRssi2X8 >> 3;
-	pAd->ate.NumOfAvgRssiSample ++;
-#endif
-}
-
-#ifdef CONFIG_STA_SUPPORT
-VOID RTMPStationStop(
-    IN  PRTMP_ADAPTER   pAd)
-{
-//	BOOLEAN       Cancelled;
-
-    ATEDBGPRINT(RT_DEBUG_TRACE, ("==> RTMPStationStop\n"));
-
-	// For rx statistics, we need to keep this timer running.
-//	RTMPCancelTimer(&pAd->Mlme.PeriodicTimer,      &Cancelled);
-
-    ATEDBGPRINT(RT_DEBUG_TRACE, ("<== RTMPStationStop\n"));
-}
-
-VOID RTMPStationStart(
-    IN  PRTMP_ADAPTER   pAd)
-{
-    ATEDBGPRINT(RT_DEBUG_TRACE, ("==> RTMPStationStart\n"));
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("<== RTMPStationStart\n"));
-}
-#endif // CONFIG_STA_SUPPORT //
-
-/*
-	==========================================================================
-	Description:
-		Setup Frame format.
-	NOTE:
-		This routine should only be used in ATE mode.
-	==========================================================================
- */
-
-#ifdef RT2870
-/*======================Start of RT2870======================*/
-/*                                                           */
-/*                                                           */
-static INT ATESetUpFrame(
-	IN PRTMP_ADAPTER pAd,
-	IN UINT32 TxIdx)
-{
-	UINT j;
-	PTX_CONTEXT	pNullContext;
-	PUCHAR			pDest;
-	HTTRANSMIT_SETTING	TxHTPhyMode;
-	PTXWI_STRUC		pTxWI;
-	PTXINFO_STRUC		pTxInfo;
-	UINT32			TransferBufferLength, OrgBufferLength = 0;
-	UCHAR			padLen = 0;
-#ifdef RALINK_28xx_QA
-	PHEADER_802_11	pHeader80211 = NULL;
-#endif // RALINK_28xx_QA //
-
-	if ((RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) ||
-		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)) ||
-		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) ||
-		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
-	{
-		return -1;
-	}
-
-	/* We always use QID_AC_BE and FIFO_EDCA in ATE mode. */
-
-	pNullContext = &(pAd->NullContext);
-	ASSERT(pNullContext != NULL);
-
-	if (pNullContext->InUse == FALSE)
-	{
-		// Set the in use bit
-		pNullContext->InUse = TRUE;
-		NdisZeroMemory(&(pAd->NullFrame), sizeof(HEADER_802_11));
-
-		// Fill 802.11 header.
-#ifdef RALINK_28xx_QA
-		if (pAd->ate.bQATxStart == TRUE)
-		{
-			pHeader80211 = NdisMoveMemory(&(pAd->NullFrame), pAd->ate.Header, pAd->ate.HLen);
-//			pDest = NdisMoveMemory(&(pAd->NullFrame), pAd->ate.Header, pAd->ate.HLen);
-//			pHeader80211 = (PHEADER_802_11)pDest;
-		}
-		else
-#endif // RALINK_28xx_QA //
-		{
-			// Fill 802.11 header.
-			NdisMoveMemory(&(pAd->NullFrame), TemplateFrame, sizeof(HEADER_802_11));
-		}
-#ifdef RT_BIG_ENDIAN
-		RTMPFrameEndianChange(pAd, (PUCHAR)&(pAd->NullFrame), DIR_READ, FALSE);
-#endif // RT_BIG_ENDIAN //
-
-#ifdef RALINK_28xx_QA
-		if (pAd->ate.bQATxStart == TRUE)
-		{
-			/* modify sequence number.... */
-			if (pAd->ate.TxDoneCount == 0)
-			{
-				pAd->ate.seq = pHeader80211->Sequence;
-			}
-			else
-			{
-				pHeader80211->Sequence = ++pAd->ate.seq;
-			}
-			/* We already got all the addr. fields from QA GUI. */
-		}
-		else
-#endif // RALINK_28xx_QA //
-		{
-			COPY_MAC_ADDR(pAd->NullFrame.Addr1, pAd->ate.Addr1);
-			COPY_MAC_ADDR(pAd->NullFrame.Addr2, pAd->ate.Addr2);
-			COPY_MAC_ADDR(pAd->NullFrame.Addr3, pAd->ate.Addr3);
-		}
-
-		RTMPZeroMemory(&pAd->NullContext.TransferBuffer->field.WirelessPacket[0], TX_BUFFER_NORMSIZE);//???
-		pTxInfo = (PTXINFO_STRUC)&pAd->NullContext.TransferBuffer->field.WirelessPacket[0];
-
-#ifdef RALINK_28xx_QA
-		if (pAd->ate.bQATxStart == TRUE)
-		{
-			// Avoid to exceed the range of WirelessPacket[].
-			ASSERT(pAd->ate.TxInfo.USBDMATxPktLen <= (MAX_FRAME_SIZE - 34/* == 2312 */));
-			NdisMoveMemory(pTxInfo, &(pAd->ate.TxInfo), sizeof(pAd->ate.TxInfo));
-		}
-		else
-#endif // RALINK_28xx_QA //
-		{
-			// Avoid to exceed the range of WirelessPacket[].
-			ASSERT(pAd->ate.TxLength <= (MAX_FRAME_SIZE - 34/* == 2312 */));
-
-			// pTxInfo->USBDMATxPktLen will be updated to include padding later.
-			ATEWriteTxInfo(pAd, pTxInfo, (USHORT)(TXWI_SIZE + pAd->ate.TxLength), TRUE, EpToQueue[MGMTPIPEIDX], FALSE,  FALSE);
-			pTxInfo->QSEL = FIFO_EDCA;
-		}
-
-		pTxWI = (PTXWI_STRUC)&pAd->NullContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE];
-
-		// Fill TxWI.
-		if (pAd->ate.bQATxStart == TRUE)
-		{
-			TxHTPhyMode.field.BW = pAd->ate.TxWI.BW;
-			TxHTPhyMode.field.ShortGI = pAd->ate.TxWI.ShortGI;
-			TxHTPhyMode.field.STBC = pAd->ate.TxWI.STBC;
-			TxHTPhyMode.field.MCS = pAd->ate.TxWI.MCS;
-			TxHTPhyMode.field.MODE = pAd->ate.TxWI.PHYMODE;
-			ATEWriteTxWI(pAd, pTxWI, pAd->ate.TxWI.FRAG, pAd->ate.TxWI.TS, pAd->ate.TxWI.AMPDU, pAd->ate.TxWI.ACK, pAd->ate.TxWI.NSEQ,
-				pAd->ate.TxWI.BAWinSize, BSSID_WCID, pAd->ate.TxWI.MPDUtotalByteCount/* include 802.11 header */, pAd->ate.TxWI.PacketId, 0, pAd->ate.TxWI.txop/*IFS_HTTXOP*/, pAd->ate.TxWI.CFACK/*FALSE*/, TxHTPhyMode);
-		}
-		else
-		{
-			TxHTPhyMode.field.BW = pAd->ate.TxWI.BW;
-			TxHTPhyMode.field.ShortGI = pAd->ate.TxWI.ShortGI;
-			TxHTPhyMode.field.STBC = 0;
-			TxHTPhyMode.field.MCS = pAd->ate.TxWI.MCS;
-			TxHTPhyMode.field.MODE = pAd->ate.TxWI.PHYMODE;
-
-			ATEWriteTxWI(pAd, pTxWI,  FALSE, FALSE, FALSE, FALSE/* No ack required. */, FALSE, 0, BSSID_WCID, pAd->ate.TxLength,
-				0, 0, IFS_HTTXOP, FALSE, TxHTPhyMode);// "MMPS_STATIC" instead of "MMPS_DYNAMIC" ???
-		}
-
-		RTMPMoveMemory(&pAd->NullContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE+TXWI_SIZE], &pAd->NullFrame, sizeof(HEADER_802_11));
-
-		pDest = &(pAd->NullContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE+TXWI_SIZE+sizeof(HEADER_802_11)]);
-
-		// Prepare frame payload
-#ifdef RALINK_28xx_QA
-		if (pAd->ate.bQATxStart == TRUE)
-		{
-			// copy pattern
-			if ((pAd->ate.PLen != 0))
-			{
-				for (j = 0; j < pAd->ate.DLen; j+=pAd->ate.PLen)
-				{
-					RTMPMoveMemory(pDest, pAd->ate.Pattern, pAd->ate.PLen);
-					pDest += pAd->ate.PLen;
-				}
-			}
-			TransferBufferLength = TXINFO_SIZE + TXWI_SIZE + pAd->ate.TxWI.MPDUtotalByteCount;
-		}
-		else
-#endif // RALINK_28xx_QA //
-		{
-		    for (j = 0; j < (pAd->ate.TxLength - sizeof(HEADER_802_11)); j++)
-		    {
-				*pDest = 0xA5;
-				pDest += 1;
-		    }
-			TransferBufferLength = TXINFO_SIZE + TXWI_SIZE + pAd->ate.TxLength;
-		}
-
-#if 1
-		OrgBufferLength = TransferBufferLength;
-		TransferBufferLength = (TransferBufferLength + 3) & (~3);
-
-		// Always add 4 extra bytes at every packet.
-		padLen = TransferBufferLength - OrgBufferLength + 4;/* 4 == last packet padding */
-		ASSERT((padLen <= (RTMP_PKT_TAIL_PADDING - 4/* 4 == MaxBulkOutsize alignment padding */)));
-
-		/* Now memzero all extra padding bytes. */
-		NdisZeroMemory(pDest, padLen);
-		pDest += padLen;
-#else
-		if ((TransferBufferLength % 4) == 1)
-		{
-			NdisZeroMemory(pDest, 7);
-			pDest += 7;
-			TransferBufferLength  += 3;
-		}
-		else if ((TransferBufferLength % 4) == 2)
-		{
-			NdisZeroMemory(pDest, 6);
-			pDest += 6;
-			TransferBufferLength  += 2;
-		}
-		else if ((TransferBufferLength % 4) == 3)
-		{
-			NdisZeroMemory(pDest, 5);
-			pDest += 5;
-			TransferBufferLength  += 1;
-		}
-#endif // 1 //
-
-		// Update pTxInfo->USBDMATxPktLen to include padding.
-		pTxInfo->USBDMATxPktLen = TransferBufferLength - TXINFO_SIZE;
-
-		TransferBufferLength += 4;
-
-		// If TransferBufferLength is multiple of 64, add extra 4 bytes again.
-		if ((TransferBufferLength % pAd->BulkOutMaxPacketSize) == 0)
-		{
-			NdisZeroMemory(pDest, 4);
-			TransferBufferLength += 4;
-		}
-
-		// Fill out frame length information for global Bulk out arbitor
-		pAd->NullContext.BulkOutSize = TransferBufferLength;
-	}
-#ifdef RT_BIG_ENDIAN
-	RTMPWIEndianChange((PUCHAR)pTxWI, TYPE_TXWI);
-	RTMPFrameEndianChange(pAd, (((PUCHAR)pTxInfo)+TXWI_SIZE+TXINFO_SIZE), DIR_WRITE, FALSE);
-    RTMPDescriptorEndianChange((PUCHAR)pTxInfo, TYPE_TXINFO);
-#endif // RT_BIG_ENDIAN //
-	return 0;
-}
-
-VOID ATE_RTUSBBulkOutDataPacketComplete(purbb_t pUrb, struct pt_regs *pt_regs)
-{
-	PRTMP_ADAPTER		pAd;
-	PTX_CONTEXT		    pNullContext;
-	UCHAR				BulkOutPipeId;
-	NTSTATUS			Status;
-	unsigned long		IrqFlags;
-	ULONG			    OldValue;
-
-	pNullContext = (PTX_CONTEXT)pUrb->context;
-	pAd = pNullContext->pAd;
-
-
-	// Reset Null frame context flags
-	pNullContext->IRPPending = FALSE;
-	pNullContext->InUse = FALSE;
-	Status = pUrb->status;
-
-	// Store BulkOut PipeId
-	BulkOutPipeId = pNullContext->BulkOutPipeId;
-	pAd->BulkOutDataOneSecCount++;
-
-	if (Status == USB_ST_NOERROR)
-	{
-#ifdef RALINK_28xx_QA
-		if ((ATE_ON(pAd)) && (pAd->ate.bQATxStart == TRUE))
-		{
-			if (pAd->ate.QID == BulkOutPipeId)
-			{
-				// Let Rx can have a chance to break in during Tx process,
-				// especially for loopback mode in QA ATE.
-				// To trade off between tx performance and loopback mode integrity.
-				/* Q   : Now Rx is handled by tasklet, do we still need this delay ? */
-				/* Ans : Even tasklet is used, Rx/Tx < 1 if we do not delay for a while right here. */
-				RTMPusecDelay(500);
-				pAd->ate.TxDoneCount++;
-				pAd->RalinkCounters.KickTxCount++;
-				ASSERT(pAd->ate.QID == 0);
-				pAd->ate.TxAc0++;
-			}
-		}
-#endif // RALINK_28xx_QA //
-		pAd->BulkOutComplete++;
-
-		pAd->Counters8023.GoodTransmits++;
-
-		/* Don't worry about the queue is empty or not. This function will check itself. */
-		RTMPDeQueuePacket(pAd, TRUE, BulkOutPipeId, MAX_TX_PROCESS);
-
-		/* In 28xx, SendTxWaitQueue ==> TxSwQueue  */
-/*
-		if (pAd->SendTxWaitQueue[BulkOutPipeId].Number > 0)
-		{
-			RTMPDeQueuePacket(pAd, BulkOutPipeId);
-		}
-*/
-	}
-	else	// STATUS_OTHER
-	{
-		pAd->BulkOutCompleteOther++;
-
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("BulkOutDataPacket Failed STATUS_OTHER = 0x%x . \n", Status));
-		ATEDBGPRINT(RT_DEBUG_ERROR, (">>BulkOutReq=0x%lx, BulkOutComplete=0x%lx\n", pAd->BulkOutReq, pAd->BulkOutComplete));
-
-		if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)))
-		{
-			RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET);
-			/* In 28xx, RT_OID_USB_RESET_BULK_OUT ==> CMDTHREAD_RESET_BULK_OUT */
-			RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT, NULL, 0);
-			// Check
-			BULK_OUT_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-			pAd->BulkOutPending[BulkOutPipeId] = FALSE;
-			pAd->bulkResetPipeid = BulkOutPipeId;
-			BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-			return;
-		}
-	}
-
-
-
-	if (atomic_read(&pAd->BulkOutRemained) > 0)
-	{
-		atomic_dec(&pAd->BulkOutRemained);
-	}
-
-	// 1st - Transmit Success
-	OldValue = pAd->WlanCounters.TransmittedFragmentCount.u.LowPart;
-	pAd->WlanCounters.TransmittedFragmentCount.u.LowPart++;
-
-	if (pAd->WlanCounters.TransmittedFragmentCount.u.LowPart < OldValue)
-	{
-		pAd->WlanCounters.TransmittedFragmentCount.u.HighPart++;
-	}
-
-	if(((pAd->ContinBulkOut == TRUE ) ||(atomic_read(&pAd->BulkOutRemained) > 0)) && (pAd->ate.Mode & ATE_TXFRAME))
-	{
-		RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE);
-	}
-	else
-	{
-		RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE);
-#ifdef RALINK_28xx_QA
-		pAd->ate.TxStatus = 0;
-#endif // RALINK_28xx_QA //
-	}
-
-	BULK_OUT_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-	pAd->BulkOutPending[BulkOutPipeId] = FALSE;
-	BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-
-	// Always call Bulk routine, even reset bulk.
-	// The protection of rest bulk should be in BulkOut routine.
-	RTUSBKickBulkOut(pAd);
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-VOID	ATE_RTUSBBulkOutDataPacket(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			BulkOutPipeId)
-{
-	PTX_CONTEXT		pNullContext = &(pAd->NullContext);
-	PURB			pUrb;
-	int				ret = 0;
-	unsigned long	IrqFlags;
-
-
-	ASSERT(BulkOutPipeId == 0);
-
-	/* Build up the frame first. */
-//	ATESetUpFrame(pAd, 0);
-
-	BULK_OUT_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-
-	if (pAd->BulkOutPending[BulkOutPipeId] == TRUE)
-	{
-		BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-		return;
-	}
-
-	pAd->BulkOutPending[BulkOutPipeId] = TRUE;
-	BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-
-	// Increase Total transmit byte counter
-	pAd->RalinkCounters.OneSecTransmittedByteCount +=  pNullContext->BulkOutSize;
-	pAd->RalinkCounters.TransmittedByteCount +=  pNullContext->BulkOutSize;
-
-	// Clear ATE frame bulk out flag
-	RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE);
-
-	// Init Tx context descriptor
-	pNullContext->IRPPending = TRUE;
-	RTUSBInitTxDesc(pAd, pNullContext, BulkOutPipeId, (usb_complete_t)ATE_RTUSBBulkOutDataPacketComplete);
-	pUrb = pNullContext->pUrb;
-
-	if((ret = RTUSB_SUBMIT_URB(pUrb))!=0)
-	{
-		ATEDBGPRINT(RT_DEBUG_ERROR, ("ATE_RTUSBBulkOutDataPacket: Submit Tx URB failed %d\n", ret));
-		return;
-	}
-
-	pAd->BulkOutReq++;
-	return;
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-VOID	ATE_RTUSBCancelPendingBulkInIRP(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	PRX_CONTEXT		pRxContext;
-	UINT			i;
-
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("--->ATE_RTUSBCancelPendingBulkInIRP\n"));
-#if 1
-	for ( i = 0; i < (RX_RING_SIZE); i++)
-	{
-		pRxContext = &(pAd->RxContext[i]);
-		if(pRxContext->IRPPending == TRUE)
-		{
-			RTUSB_UNLINK_URB(pRxContext->pUrb);
-			pRxContext->IRPPending = FALSE;
-			pRxContext->InUse = FALSE;
-			//NdisInterlockedDecrement(&pAd->PendingRx);
-			//pAd->PendingRx--;
-		}
-	}
-#else
-	for ( i = 0; i < (RX_RING_SIZE); i++)
-	{
-		pRxContext = &(pAd->RxContext[i]);
-		if(atomic_read(&pRxContext->IrpLock) == IRPLOCK_CANCELABLE)
-		{
-			RTUSB_UNLINK_URB(pRxContext->pUrb);
-		}
-		InterlockedExchange(&pRxContext->IrpLock, IRPLOCK_CANCE_START);
-	}
-#endif // 1 //
-	ATEDBGPRINT(RT_DEBUG_TRACE, ("<---ATE_RTUSBCancelPendingBulkInIRP\n"));
-	return;
-}
-#endif // RT2870 //
-
-VOID rt_ee_read_all(PRTMP_ADAPTER pAd, USHORT *Data)
-{
-	USHORT i;
-	USHORT value;
-
-	for (i = 0 ; i < EEPROM_SIZE/2 ; )
-	{
-		/* "value" is expecially for some compilers... */
-		RT28xx_EEPROM_READ16(pAd, i*2, value);
-		Data[i] = value;
-		i++;
-	}
-}
-
-VOID rt_ee_write_all(PRTMP_ADAPTER pAd, USHORT *Data)
-{
-	USHORT i;
-	USHORT value;
-
-	for (i = 0 ; i < EEPROM_SIZE/2 ; )
-	{
-		/* "value" is expecially for some compilers... */
-		value = Data[i];
-		RT28xx_EEPROM_WRITE16(pAd, i*2, value);
-		i ++;
-	}
-}
-#ifdef RALINK_28xx_QA
-VOID ATE_QA_Statistics(
-	IN PRTMP_ADAPTER			pAd,
-	IN PRXWI_STRUC				pRxWI,
-	IN PRT28XX_RXD_STRUC		pRxD,
-	IN PHEADER_802_11			pHeader)
-{
-	// update counter first
-	if (pHeader != NULL)
-	{
-		if (pHeader->FC.Type == BTYPE_DATA)
-		{
-			if (pRxD->U2M)
-				pAd->ate.U2M++;
-			else
-				pAd->ate.OtherData++;
-		}
-		else if (pHeader->FC.Type == BTYPE_MGMT)
-		{
-			if (pHeader->FC.SubType == SUBTYPE_BEACON)
-				pAd->ate.Beacon++;
-			else
-				pAd->ate.OtherCount++;
-		}
-		else if (pHeader->FC.Type == BTYPE_CNTL)
-		{
-			pAd->ate.OtherCount++;
-		}
-	}
-	pAd->ate.RSSI0 = pRxWI->RSSI0;
-	pAd->ate.RSSI1 = pRxWI->RSSI1;
-	pAd->ate.RSSI2 = pRxWI->RSSI2;
-	pAd->ate.SNR0 = pRxWI->SNR0;
-	pAd->ate.SNR1 = pRxWI->SNR1;
-}
-
-/* command id with Cmd Type == 0x0008(for 28xx)/0x0005(for iNIC) */
-#define RACFG_CMD_RF_WRITE_ALL		0x0000
-#define RACFG_CMD_E2PROM_READ16		0x0001
-#define RACFG_CMD_E2PROM_WRITE16	0x0002
-#define RACFG_CMD_E2PROM_READ_ALL	0x0003
-#define RACFG_CMD_E2PROM_WRITE_ALL	0x0004
-#define RACFG_CMD_IO_READ			0x0005
-#define RACFG_CMD_IO_WRITE			0x0006
-#define RACFG_CMD_IO_READ_BULK		0x0007
-#define RACFG_CMD_BBP_READ8			0x0008
-#define RACFG_CMD_BBP_WRITE8		0x0009
-#define RACFG_CMD_BBP_READ_ALL		0x000a
-#define RACFG_CMD_GET_COUNTER		0x000b
-#define RACFG_CMD_CLEAR_COUNTER		0x000c
-
-#define RACFG_CMD_RSV1				0x000d
-#define RACFG_CMD_RSV2				0x000e
-#define RACFG_CMD_RSV3				0x000f
-
-#define RACFG_CMD_TX_START			0x0010
-#define RACFG_CMD_GET_TX_STATUS		0x0011
-#define RACFG_CMD_TX_STOP			0x0012
-#define RACFG_CMD_RX_START			0x0013
-#define RACFG_CMD_RX_STOP			0x0014
-#define RACFG_CMD_GET_NOISE_LEVEL	0x0015
-
-#define RACFG_CMD_ATE_START			0x0080
-#define RACFG_CMD_ATE_STOP			0x0081
-
-#define RACFG_CMD_ATE_START_TX_CARRIER		0x0100
-#define RACFG_CMD_ATE_START_TX_CONT			0x0101
-#define RACFG_CMD_ATE_START_TX_FRAME		0x0102
-#define RACFG_CMD_ATE_SET_BW	            0x0103
-#define RACFG_CMD_ATE_SET_TX_POWER0	        0x0104
-#define RACFG_CMD_ATE_SET_TX_POWER1			0x0105
-#define RACFG_CMD_ATE_SET_FREQ_OFFSET		0x0106
-#define RACFG_CMD_ATE_GET_STATISTICS		0x0107
-#define RACFG_CMD_ATE_RESET_COUNTER			0x0108
-#define RACFG_CMD_ATE_SEL_TX_ANTENNA		0x0109
-#define RACFG_CMD_ATE_SEL_RX_ANTENNA		0x010a
-#define RACFG_CMD_ATE_SET_PREAMBLE			0x010b
-#define RACFG_CMD_ATE_SET_CHANNEL			0x010c
-#define RACFG_CMD_ATE_SET_ADDR1				0x010d
-#define RACFG_CMD_ATE_SET_ADDR2				0x010e
-#define RACFG_CMD_ATE_SET_ADDR3				0x010f
-#define RACFG_CMD_ATE_SET_RATE				0x0110
-#define RACFG_CMD_ATE_SET_TX_FRAME_LEN		0x0111
-#define RACFG_CMD_ATE_SET_TX_FRAME_COUNT	0x0112
-#define RACFG_CMD_ATE_START_RX_FRAME		0x0113
-#define RACFG_CMD_ATE_E2PROM_READ_BULK	0x0114
-#define RACFG_CMD_ATE_E2PROM_WRITE_BULK	0x0115
-#define RACFG_CMD_ATE_IO_WRITE_BULK		0x0116
-#define RACFG_CMD_ATE_BBP_READ_BULK		0x0117
-#define RACFG_CMD_ATE_BBP_WRITE_BULK	0x0118
-#define RACFG_CMD_ATE_RF_READ_BULK		0x0119
-#define RACFG_CMD_ATE_RF_WRITE_BULK		0x011a
-
-
-
-#define A2Hex(_X, _p) 				\
-{									\
-	UCHAR *p;						\
-	_X = 0;							\
-	p = _p;							\
-	while (((*p >= 'a') && (*p <= 'f')) || ((*p >= 'A') && (*p <= 'F')) || ((*p >= '0') && (*p <= '9')))		\
-	{												\
-		if ((*p >= 'a') && (*p <= 'f'))				\
-			_X = _X * 16 + *p - 87;					\
-		else if ((*p >= 'A') && (*p <= 'F'))		\
-			_X = _X * 16 + *p - 55;					\
-		else if ((*p >= '0') && (*p <= '9'))		\
-			_X = _X * 16 + *p - 48;					\
-		p++;										\
-	}												\
-}
-
-
-static VOID memcpy_exl(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len);
-static VOID memcpy_exs(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len);
-static VOID RTMP_IO_READ_BULK(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, UINT32 len);
-
-#ifdef UCOS
-int ate_copy_to_user(
-	IN PUCHAR payload,
-	IN PUCHAR msg,
-	IN INT    len)
-{
-	memmove(payload, msg, len);
-	return 0;
-}
-
-#undef	copy_to_user
-#define copy_to_user(x,y,z) ate_copy_to_user((PUCHAR)x, (PUCHAR)y, z)
-#endif // UCOS //
-
-#define	LEN_OF_ARG 16
-
-VOID RtmpDoAte(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq)
-{
-	unsigned short Command_Id;
-	struct ate_racfghdr *pRaCfg;
-	INT	Status = NDIS_STATUS_SUCCESS;
-
-
-
-	if((pRaCfg = kmalloc(sizeof(struct ate_racfghdr), GFP_KERNEL)) == NULL)
-	{
-		Status = -EINVAL;
-		return;
-	}
-
-	NdisZeroMemory(pRaCfg, sizeof(struct ate_racfghdr));
-
-    if (copy_from_user((PUCHAR)pRaCfg, wrq->u.data.pointer, wrq->u.data.length))
-	{
-		Status = -EFAULT;
-		kfree(pRaCfg);
-		return;
-	}
-
-
-	Command_Id = ntohs(pRaCfg->command_id);
-
-	ATEDBGPRINT(RT_DEBUG_TRACE,("\n%s: Command_Id = 0x%04x !\n", __FUNCTION__, Command_Id));
-
-	switch (Command_Id)
-	{
- 		// We will get this command when QA starts.
-		case RACFG_CMD_ATE_START:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_START\n"));
-
-				// prepare feedback as soon as we can to avoid QA timeout.
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_TRACE, ("copy_to_user() fail in case RACFG_CMD_ATE_START\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_START is done !\n"));
-				}
-				Set_ATE_Proc(pAdapter, "ATESTART");
-			}
-			break;
-
- 		// We will get this command either QA is closed or ated is killed by user.
-		case RACFG_CMD_ATE_STOP:
-			{
-#ifndef UCOS
-				INT32 ret;
-#endif // !UCOS //
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_STOP\n"));
-
-				// Distinguish this command came from QA(via ated)
-				// or ate daemon according to the existence of pid in payload.
-				// No need to prepare feedback if this cmd came directly from ate daemon.
-				pRaCfg->length = ntohs(pRaCfg->length);
-
-				if (pRaCfg->length == sizeof(pAdapter->ate.AtePid))
-				{
-					// This command came from QA.
-					// Get the pid of ATE daemon.
-					memcpy((UCHAR *)&pAdapter->ate.AtePid,
-						(&pRaCfg->data[0]) - 2/* == &(pRaCfg->status) */,
-						sizeof(pAdapter->ate.AtePid));
-
-					// prepare feedback as soon as we can to avoid QA timeout.
-					pRaCfg->length = htons(2);
-					pRaCfg->status = htons(0);
-
-					wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-										+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-										+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-					ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
-	            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-	            	{
-	            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_STOP\n"));
-	                    Status = -EFAULT;
-	            	}
-
-					//
-					// kill ATE daemon when leaving ATE mode.
-					// We must kill ATE daemon first before setting ATESTOP,
-					// or Microsoft will report sth. wrong.
-#ifndef UCOS
-					ret = kill_proc(pAdapter->ate.AtePid, SIGTERM, 1);
-					if (ret)
-					{
-						ATEDBGPRINT(RT_DEBUG_ERROR, ("%s: unable to signal thread\n", pAdapter->net_dev->name));
-					}
-#endif // !UCOS //
-				}
-
-#ifdef UCOS
-				// Roger add to avoid error message after close QA
-				if (pAdapter->CSRBaseAddress == RT2860_CSR_ADDR)
-				{
-
-					// prepare feedback as soon as we can to avoid QA timeout.
-					pRaCfg->length = htons(2);
-					pRaCfg->status = htons(0);
-
-					wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-										+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-										+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-					ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-	            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-	            	{
-	            		ATEDBGPRINT(RT_DEBUG_TRACE, ("copy_to_user() fail in case RACFG_CMD_AP_START\n"));
-	                    Status = -EFAULT;
-	            	}
-				}
-#endif // UCOS //
-
-				// AP might have in ATE_STOP mode due to cmd from QA.
-				if (ATE_ON(pAdapter))
-				{
-					// Someone has killed ate daemon while QA GUI is still open.
-					Set_ATE_Proc(pAdapter, "ATESTOP");
-					ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_AP_START is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_RF_WRITE_ALL:
-			{
-				UINT32 R1, R2, R3, R4;
-				USHORT channel;
-
-				memcpy(&R1, pRaCfg->data-2, 4);
-				memcpy(&R2, pRaCfg->data+2, 4);
-				memcpy(&R3, pRaCfg->data+6, 4);
-				memcpy(&R4, pRaCfg->data+10, 4);
-				memcpy(&channel, pRaCfg->data+14, 2);
-
-				pAdapter->LatchRfRegs.R1 = ntohl(R1);
-				pAdapter->LatchRfRegs.R2 = ntohl(R2);
-				pAdapter->LatchRfRegs.R3 = ntohl(R3);
-				pAdapter->LatchRfRegs.R4 = ntohl(R4);
-				pAdapter->LatchRfRegs.Channel = ntohs(channel);
-
-				RTMP_RF_IO_WRITE32(pAdapter, pAdapter->LatchRfRegs.R1);
-				RTMP_RF_IO_WRITE32(pAdapter, pAdapter->LatchRfRegs.R2);
-				RTMP_RF_IO_WRITE32(pAdapter, pAdapter->LatchRfRegs.R3);
-				RTMP_RF_IO_WRITE32(pAdapter, pAdapter->LatchRfRegs.R4);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_RF_WRITE_ALL\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_RF_WRITE_ALL is done !\n"));
-				}
-			}
-            break;
-
-		case RACFG_CMD_E2PROM_READ16:
-			{
-				USHORT	offset, value, tmp;
-
-				offset = ntohs(pRaCfg->status);
-				/* "tmp" is expecially for some compilers... */
-				RT28xx_EEPROM_READ16(pAdapter, offset, tmp);
-				value = tmp;
-				value = htons(value);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("EEPROM Read offset = 0x%04x, value = 0x%04x\n", offset, value));
-
-				// prepare feedback
-				pRaCfg->length = htons(4);
-				pRaCfg->status = htons(0);
-				memcpy(pRaCfg->data, &value, 2);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("sizeof(struct ate_racfghdr) = %d\n", sizeof(struct ate_racfghdr)));
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_E2PROM_READ16\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_E2PROM_READ16 is done !\n"));
-				}
-           	}
-			break;
-
-		case RACFG_CMD_E2PROM_WRITE16:
-			{
-				USHORT	offset, value;
-
-				offset = ntohs(pRaCfg->status);
-				memcpy(&value, pRaCfg->data, 2);
-				value = ntohs(value);
-				RT28xx_EEPROM_WRITE16(pAdapter, offset, value);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_E2PROM_WRITE16\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_E2PROM_WRITE16 is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_E2PROM_READ_ALL:
-			{
-				USHORT buffer[EEPROM_SIZE/2];
-
-				rt_ee_read_all(pAdapter,(USHORT *)buffer);
-				memcpy_exs(pAdapter, pRaCfg->data, (UCHAR *)buffer, EEPROM_SIZE);
-
-				// prepare feedback
-				pRaCfg->length = htons(2+EEPROM_SIZE);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_E2PROM_READ_ALL\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_E2PROM_READ_ALL is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_E2PROM_WRITE_ALL:
-			{
-				USHORT buffer[EEPROM_SIZE/2];
-
-				NdisZeroMemory((UCHAR *)buffer, EEPROM_SIZE);
-				memcpy_exs(pAdapter, (UCHAR *)buffer, (UCHAR *)&pRaCfg->status, EEPROM_SIZE);
-				rt_ee_write_all(pAdapter,(USHORT *)buffer);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_E2PROM_WRITE_ALL\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_ERROR, ("RACFG_CMD_E2PROM_WRITE_ALL is done !\n"));
-				}
-
-			}
-			break;
-
-		case RACFG_CMD_IO_READ:
-			{
-				UINT32	offset;
-				UINT32	value;
-
-				memcpy(&offset, &pRaCfg->status, 4);
-				offset = ntohl(offset);
-
-				// We do not need the base address.
-				// So just extract the offset out.
-				offset &= 0x0000FFFF;
-				RTMP_IO_READ32(pAdapter, offset, &value);
-				value = htonl(value);
-
-				// prepare feedback
-				pRaCfg->length = htons(6);
-				pRaCfg->status = htons(0);
-				memcpy(pRaCfg->data, &value, 4);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_IO_READ\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_IO_READ is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_IO_WRITE:
-			{
-				UINT32	offset, value;
-
-				memcpy(&offset, pRaCfg->data-2, 4);
-				memcpy(&value, pRaCfg->data+2, 4);
-
-				offset = ntohl(offset);
-
-				// We do not need the base address.
-				// So just extract out the offset.
-				offset &= 0x0000FFFF;
-				value = ntohl(value);
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_IO_WRITE: offset = %x, value = %x\n", offset, value));
-				RTMP_IO_WRITE32(pAdapter, offset, value);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_IO_WRITE\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_IO_WRITE is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_IO_READ_BULK:
-			{
-				UINT32	offset;
-				USHORT	len;
-
-				memcpy(&offset, &pRaCfg->status, 4);
-				offset = ntohl(offset);
-
-				// We do not need the base address.
-				// So just extract the offset.
-				offset &= 0x0000FFFF;
-				memcpy(&len, pRaCfg->data+2, 2);
-				len = ntohs(len);
-
-				if (len > 371)
-				{
-					ATEDBGPRINT(RT_DEBUG_TRACE,("len is too large, make it smaller\n"));
-					pRaCfg->length = htons(2);
-					pRaCfg->status = htons(1);
-					break;
-				}
-
-				RTMP_IO_READ_BULK(pAdapter, pRaCfg->data, (UCHAR *)offset, len*4);// unit in four bytes
-
-				// prepare feedback
-				pRaCfg->length = htons(2+len*4);// unit in four bytes
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_IO_READ_BULK\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_IO_READ_BULK is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_BBP_READ8:
-			{
-				USHORT	offset;
-				UCHAR	value;
-
-				value = 0;
-				offset = ntohs(pRaCfg->status);
-
-				if (ATE_ON(pAdapter))
-				{
-					ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, offset,  &value);
-				}
-				else
-				{
-					RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, offset,  &value);
-				}
-				// prepare feedback
-				pRaCfg->length = htons(3);
-				pRaCfg->status = htons(0);
-				pRaCfg->data[0] = value;
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("BBP value = %x\n", value));
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_BBP_READ8\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_BBP_READ8 is done !\n"));
-				}
-			}
-			break;
-		case RACFG_CMD_BBP_WRITE8:
-			{
-				USHORT	offset;
-				UCHAR	value;
-
-				offset = ntohs(pRaCfg->status);
-				memcpy(&value, pRaCfg->data, 1);
-
-				if (ATE_ON(pAdapter))
-				{
-					ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, offset,  value);
-				}
-				else
-				{
-					RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, offset,  value);
-				}
-
-				if ((offset == BBP_R1) || (offset == BBP_R3))
-				{
-					SyncTxRxConfig(pAdapter, offset, value);
-				}
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_BBP_WRITE8\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_BBP_WRITE8 is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_BBP_READ_ALL:
-			{
-				USHORT j;
-
-				for (j = 0; j < 137; j++)
-				{
-					pRaCfg->data[j] = 0;
-
-					if (ATE_ON(pAdapter))
-					{
-						ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, j,  &pRaCfg->data[j]);
-					}
-					else
-					{
-						RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, j,  &pRaCfg->data[j]);
-					}
-				}
-
-				// prepare feedback
-				pRaCfg->length = htons(2+137);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_BBP_READ_ALL\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_BBP_READ_ALL is done !\n"));
-				}
-			}
-
-			break;
-
-		case RACFG_CMD_ATE_E2PROM_READ_BULK:
-		{
-			USHORT offset;
-			USHORT len;
-			USHORT buffer[EEPROM_SIZE/2];
-
-			offset = ntohs(pRaCfg->status);
-			memcpy(&len, pRaCfg->data, 2);
-			len = ntohs(len);
-
-			rt_ee_read_all(pAdapter,(USHORT *)buffer);
-			if (offset + len <= EEPROM_SIZE)
-				memcpy_exs(pAdapter, pRaCfg->data, (UCHAR *)buffer+offset, len);
-			else
-				ATEDBGPRINT(RT_DEBUG_ERROR, ("exceed EEPROM size\n"));
-
-			// prepare feedback
-			pRaCfg->length = htons(2+len);
-			pRaCfg->status = htons(0);
-			wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            {
-            	ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_E2PROM_READ_BULK\n"));
-                Status = -EFAULT;
-            }
-			else
-			{
-               	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_E2PROM_READ_BULK is done !\n"));
-			}
-
-		}
-			break;
-
-		case RACFG_CMD_ATE_E2PROM_WRITE_BULK:
-		{
-			USHORT offset;
-			USHORT len;
-			USHORT buffer[EEPROM_SIZE/2];
-
-			offset = ntohs(pRaCfg->status);
-			memcpy(&len, pRaCfg->data, 2);
-			len = ntohs(len);
-
-			rt_ee_read_all(pAdapter,(USHORT *)buffer);
-			memcpy_exs(pAdapter, (UCHAR *)buffer + offset, (UCHAR *)pRaCfg->data + 2, len);
-			rt_ee_write_all(pAdapter,(USHORT *)buffer);
-
-			// prepare feedback
-			pRaCfg->length = htons(2);
-			pRaCfg->status = htons(0);
-			wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-								+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-								+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-            if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            {
-            	ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_E2PROM_WRITE_BULK\n"));
-                   Status = -EFAULT;
-            }
-			else
-			{
-               	ATEDBGPRINT(RT_DEBUG_ERROR, ("RACFG_CMD_ATE_E2PROM_WRITE_BULK is done !\n"));
-			}
-
-		}
-			break;
-
-		case RACFG_CMD_ATE_IO_WRITE_BULK:
-		{
-			UINT32 offset, i, value;
-			USHORT len;
-
-			memcpy(&offset, &pRaCfg->status, 4);
-			offset = ntohl(offset);
-			memcpy(&len, pRaCfg->data+2, 2);
-			len = ntohs(len);
-
-			for (i = 0; i < len; i += 4)
-			{
-				memcpy_exl(pAdapter, (UCHAR *)&value, pRaCfg->data+4+i, 4);
-				printk("Write %x %x\n", offset + i, value);
-				RTMP_IO_WRITE32(pAdapter, (offset +i) & 0xffff, value);
-			}
-
-			// prepare feedback
-			pRaCfg->length = htons(2);
-			pRaCfg->status = htons(0);
-			wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-								+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-								+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-            if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            {
-            	ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_IO_WRITE_BULK\n"));
-                   Status = -EFAULT;
-            }
-			else
-			{
-               	ATEDBGPRINT(RT_DEBUG_ERROR, ("RACFG_CMD_ATE_IO_WRITE_BULK is done !\n"));
-			}
-
-		}
-			break;
-
-		case RACFG_CMD_ATE_BBP_READ_BULK:
-		{
-			USHORT offset;
-			USHORT len;
-			USHORT j;
-
-			offset = ntohs(pRaCfg->status);
-			memcpy(&len, pRaCfg->data, 2);
-			len = ntohs(len);
-
-
-			for (j = offset; j < (offset+len); j++)
-			{
-				pRaCfg->data[j - offset] = 0;
-
-				if (pAdapter->ate.Mode == ATE_STOP)
-				{
-					RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, j,  &pRaCfg->data[j - offset]);
-				}
-				else
-				{
-					ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, j,  &pRaCfg->data[j - offset]);
-				}
-			}
-
-			// prepare feedback
-			pRaCfg->length = htons(2+len);
-			pRaCfg->status = htons(0);
-			wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-								+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-								+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            {
-            	ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_BBP_READ_BULK\n"));
-                   Status = -EFAULT;
-            }
-			else
-			{
-               	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_BBP_READ_BULK is done !\n"));
-			}
-
-		}
-			break;
-
-		case RACFG_CMD_ATE_BBP_WRITE_BULK:
-		{
-			USHORT offset;
-			USHORT len;
-			USHORT j;
-			UCHAR *value;
-
-			offset = ntohs(pRaCfg->status);
-			memcpy(&len, pRaCfg->data, 2);
-			len = ntohs(len);
-
-			for (j = offset; j < (offset+len); j++)
-			{
-				value = pRaCfg->data + 2 + (j - offset);
-				if (pAdapter->ate.Mode == ATE_STOP)
-				{
-					RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, j,  *value);
-				}
-				else
-				{
-					ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, j,  *value);
-				}
-			}
-
-			// prepare feedback
-			pRaCfg->length = htons(2);
-			pRaCfg->status = htons(0);
-			wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-								+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-								+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            {
-            	ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_BBP_WRITE_BULK\n"));
-                   Status = -EFAULT;
-            }
-			else
-			{
-               	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_BBP_WRITE_BULK is done !\n"));
-			}
-		}
-			break;
-
-#ifdef CONFIG_RALINK_RT3052
-		case RACFG_CMD_ATE_RF_READ_BULK:
-		{
-			USHORT offset;
-			USHORT len;
-			USHORT j;
-
-			offset = ntohs(pRaCfg->status);
-			memcpy(&len, pRaCfg->data, 2);
-			len = ntohs(len);
-
-			for (j = offset; j < (offset+len); j++)
-			{
-				pRaCfg->data[j - offset] = 0;
-				RT30xxReadRFRegister(pAdapter, j,  &pRaCfg->data[j - offset]);
-			}
-
-			// prepare feedback
-			pRaCfg->length = htons(2+len);
-			pRaCfg->status = htons(0);
-			wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-								+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-								+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            {
-            	ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_RF_READ_BULK\n"));
-                   Status = -EFAULT;
-            }
-			else
-			{
-               	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_RF_READ_BULK is done !\n"));
-			}
-
-		}
-			break;
-
-		case RACFG_CMD_ATE_RF_WRITE_BULK:
-		{
-			USHORT offset;
-			USHORT len;
-			USHORT j;
-			UCHAR *value;
-
-			offset = ntohs(pRaCfg->status);
-			memcpy(&len, pRaCfg->data, 2);
-			len = ntohs(len);
-
-			for (j = offset; j < (offset+len); j++)
-			{
-				value = pRaCfg->data + 2 + (j - offset);
-				RT30xxWriteRFRegister(pAdapter, j,  *value);
-			}
-
-			// prepare feedback
-			pRaCfg->length = htons(2);
-			pRaCfg->status = htons(0);
-			wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-								+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-								+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            {
-            	ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_RF_WRITE_BULK\n"));
-                   Status = -EFAULT;
-            }
-			else
-			{
-               	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_RF_WRITE_BULK is done !\n"));
-			}
-
-		}
-			break;
-#endif
-
-
-		case RACFG_CMD_GET_NOISE_LEVEL:
-			{
-				UCHAR	channel;
-				INT32   buffer[3][10];/* 3 : RxPath ; 10 : no. of per rssi samples */
-
-				channel = (ntohs(pRaCfg->status) & 0x00FF);
-				CalNoiseLevel(pAdapter, channel, buffer);
-				memcpy_exl(pAdapter, (UCHAR *)pRaCfg->data, (UCHAR *)&(buffer[0][0]), (sizeof(INT32)*3*10));
-
-				// prepare feedback
-				pRaCfg->length = htons(2 + (sizeof(INT32)*3*10));
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_GET_NOISE_LEVEL\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_GET_NOISE_LEVEL is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_GET_COUNTER:
-			{
-				memcpy_exl(pAdapter, &pRaCfg->data[0], (UCHAR *)&pAdapter->ate.U2M, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[4], (UCHAR *)&pAdapter->ate.OtherData, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[8], (UCHAR *)&pAdapter->ate.Beacon, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[12], (UCHAR *)&pAdapter->ate.OtherCount, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[16], (UCHAR *)&pAdapter->ate.TxAc0, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[20], (UCHAR *)&pAdapter->ate.TxAc1, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[24], (UCHAR *)&pAdapter->ate.TxAc2, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[28], (UCHAR *)&pAdapter->ate.TxAc3, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[32], (UCHAR *)&pAdapter->ate.TxHCCA, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[36], (UCHAR *)&pAdapter->ate.TxMgmt, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[40], (UCHAR *)&pAdapter->ate.RSSI0, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[44], (UCHAR *)&pAdapter->ate.RSSI1, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[48], (UCHAR *)&pAdapter->ate.RSSI2, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[52], (UCHAR *)&pAdapter->ate.SNR0, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[56], (UCHAR *)&pAdapter->ate.SNR1, 4);
-
-				pRaCfg->length = htons(2+60);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_GET_COUNTER\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_GET_COUNTER is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_CLEAR_COUNTER:
-			{
-				pAdapter->ate.U2M = 0;
-				pAdapter->ate.OtherData = 0;
-				pAdapter->ate.Beacon = 0;
-				pAdapter->ate.OtherCount = 0;
-				pAdapter->ate.TxAc0 = 0;
-				pAdapter->ate.TxAc1 = 0;
-				pAdapter->ate.TxAc2 = 0;
-				pAdapter->ate.TxAc3 = 0;
-				pAdapter->ate.TxHCCA = 0;
-				pAdapter->ate.TxMgmt = 0;
-				pAdapter->ate.TxDoneCount = 0;
-
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_CLEAR_COUNTER\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_CLEAR_COUNTER is done !\n"));
-				}
-			}
-
-			break;
-
-		case RACFG_CMD_TX_START:
-			{
-				USHORT *p;
-				USHORT	err = 1;
-				UCHAR   Bbp22Value = 0, Bbp24Value = 0;
-
-				if ((pAdapter->ate.TxStatus != 0) && (pAdapter->ate.Mode & ATE_TXFRAME))
-				{
-					ATEDBGPRINT(RT_DEBUG_TRACE,("Ate Tx is already running, to run next Tx, you must stop it first\n"));
-					err = 2;
-					goto TX_START_ERROR;
-				}
-				else if ((pAdapter->ate.TxStatus != 0) && !(pAdapter->ate.Mode & ATE_TXFRAME))
-				{
-					int i = 0;
-
-					while ((i++ < 10) && (pAdapter->ate.TxStatus != 0))
-					{
-						RTMPusecDelay(5000);
-					}
-
-					// force it to stop
-					pAdapter->ate.TxStatus = 0;
-					pAdapter->ate.TxDoneCount = 0;
-					//pAdapter->ate.Repeat = 0;
-					pAdapter->ate.bQATxStart = FALSE;
-				}
-
-				// If pRaCfg->length == 0, this "RACFG_CMD_TX_START" is for Carrier test or Carrier Suppression.
-				if (ntohs(pRaCfg->length) != 0)
-				{
-					// Get frame info
-#ifdef RT2870
-					NdisMoveMemory(&pAdapter->ate.TxInfo, pRaCfg->data - 2, 4);
-#ifdef RT_BIG_ENDIAN
-					RTMPDescriptorEndianChange((PUCHAR) &pAdapter->ate.TxInfo, TYPE_TXINFO);
-#endif // RT_BIG_ENDIAN //
-#endif // RT2870 //
-
-					NdisMoveMemory(&pAdapter->ate.TxWI, pRaCfg->data + 2, 16);
-#ifdef RT_BIG_ENDIAN
-					RTMPWIEndianChange((PUCHAR)&pAdapter->ate.TxWI, TYPE_TXWI);
-#endif // RT_BIG_ENDIAN //
-
-					NdisMoveMemory(&pAdapter->ate.TxCount, pRaCfg->data + 18, 4);
-					pAdapter->ate.TxCount = ntohl(pAdapter->ate.TxCount);
-
-					p = (USHORT *)(&pRaCfg->data[22]);
-					//p = pRaCfg->data + 22;
-					// always use QID_AC_BE
-					pAdapter->ate.QID = 0;
-					p = (USHORT *)(&pRaCfg->data[24]);
-					//p = pRaCfg->data + 24;
-					pAdapter->ate.HLen = ntohs(*p);
-
-					if (pAdapter->ate.HLen > 32)
-					{
-						ATEDBGPRINT(RT_DEBUG_ERROR,("pAdapter->ate.HLen > 32\n"));
-						err = 3;
-						goto TX_START_ERROR;
-					}
-
-					NdisMoveMemory(&pAdapter->ate.Header, pRaCfg->data + 26, pAdapter->ate.HLen);
-
-
-					pAdapter->ate.PLen = ntohs(pRaCfg->length) - (pAdapter->ate.HLen + 28);
-
-					if (pAdapter->ate.PLen > 32)
-					{
-						ATEDBGPRINT(RT_DEBUG_ERROR,("pAdapter->ate.PLen > 32\n"));
-						err = 4;
-						goto TX_START_ERROR;
-					}
-
-					NdisMoveMemory(&pAdapter->ate.Pattern, pRaCfg->data + 26 + pAdapter->ate.HLen, pAdapter->ate.PLen);
-					pAdapter->ate.DLen = pAdapter->ate.TxWI.MPDUtotalByteCount - pAdapter->ate.HLen;
-				}
-
-				ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R22, &Bbp22Value);
-
-				switch (Bbp22Value)
-				{
-					case BBP22_TXFRAME:
-						{
-							if (pAdapter->ate.TxCount == 0)
-							{
-							}
-							ATEDBGPRINT(RT_DEBUG_TRACE,("START TXFRAME\n"));
-							pAdapter->ate.bQATxStart = TRUE;
-							Set_ATE_Proc(pAdapter, "TXFRAME");
-						}
-						break;
-
-					case BBP22_TXCONT_OR_CARRSUPP:
-						{
-							ATEDBGPRINT(RT_DEBUG_TRACE,("BBP22_TXCONT_OR_CARRSUPP\n"));
-							ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, 24, &Bbp24Value);
-
-							switch (Bbp24Value)
-							{
-								case BBP24_TXCONT:
-									{
-										ATEDBGPRINT(RT_DEBUG_TRACE,("START TXCONT\n"));
-										pAdapter->ate.bQATxStart = TRUE;
-										Set_ATE_Proc(pAdapter, "TXCONT");
-									}
-									break;
-
-								case BBP24_CARRSUPP:
-									{
-										ATEDBGPRINT(RT_DEBUG_TRACE,("START TXCARRSUPP\n"));
-										pAdapter->ate.bQATxStart = TRUE;
-										pAdapter->ate.Mode |= ATE_TXCARRSUPP;
-									}
-									break;
-
-								default:
-									{
-										ATEDBGPRINT(RT_DEBUG_ERROR,("Unknown Start TX subtype !"));
-									}
-									break;
-							}
-						}
-						break;
-
-					case BBP22_TXCARR:
-						{
-							ATEDBGPRINT(RT_DEBUG_TRACE,("START TXCARR\n"));
-							pAdapter->ate.bQATxStart = TRUE;
-							Set_ATE_Proc(pAdapter, "TXCARR");
-						}
-						break;
-
-					default:
-						{
-							ATEDBGPRINT(RT_DEBUG_ERROR,("Unknown Start TX subtype !"));
-						}
-						break;
-				}
-
-				if (pAdapter->ate.bQATxStart == TRUE)
-				{
-					// prepare feedback
-					pRaCfg->length = htons(2);
-					pRaCfg->status = htons(0);
-
-					wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-										+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-										+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-	            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-	            	{
-	            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() was failed in case RACFG_CMD_TX_START\n"));
-	                    Status = -EFAULT;
-	            	}
-					else
-					{
-	                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_TX_START is done !\n"));
-					}
-					break;
-				}
-
-TX_START_ERROR:
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(err);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_TX_START\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("feedback of TX_START_ERROR is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_GET_TX_STATUS:
-			{
-				UINT32 count;
-
-				// prepare feedback
-				pRaCfg->length = htons(6);
-				pRaCfg->status = htons(0);
-				count = htonl(pAdapter->ate.TxDoneCount);
-				NdisMoveMemory(pRaCfg->data, &count, 4);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_GET_TX_STATUS\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_GET_TX_STATUS is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_TX_STOP:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_TX_STOP\n"));
-
-				Set_ATE_Proc(pAdapter, "TXSTOP");
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_TRACE, ("copy_to_user() fail in case RACFG_CMD_TX_STOP\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_TX_STOP is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_RX_START:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_RX_START\n"));
-
-				pAdapter->ate.bQARxStart = TRUE;
-				Set_ATE_Proc(pAdapter, "RXFRAME");
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_RX_START\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_RX_START is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_RX_STOP:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_RX_STOP\n"));
-
-				Set_ATE_Proc(pAdapter, "RXSTOP");
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_RX_STOP\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_RX_STOP is done !\n"));
-				}
-			}
-			break;
-
-		/* The following cases are for new ATE GUI(not QA). */
-		/*==================================================*/
-		case RACFG_CMD_ATE_START_TX_CARRIER:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_START_TX_CARRIER\n"));
-
-				Set_ATE_Proc(pAdapter, "TXCARR");
-
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_START_TX_CARRIER\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_START_TX_CARRIER is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_START_TX_CONT:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_START_TX_CONT\n"));
-
-				Set_ATE_Proc(pAdapter, "TXCONT");
-
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_START_TX_CONT\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_START_TX_CONT is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_START_TX_FRAME:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_START_TX_FRAME\n"));
-
-				Set_ATE_Proc(pAdapter, "TXFRAME");
-
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_START_TX_FRAME\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_START_TX_FRAME is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_BW:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_BW\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-
-				Set_ATE_TX_BW_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_BW\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_BW is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_TX_POWER0:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_TX_POWER0\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_TX_POWER0_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_TX_POWER0\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_TX_POWER0 is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_TX_POWER1:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_TX_POWER1\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_TX_POWER1_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_TX_POWER1\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_TX_POWER1 is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_FREQ_OFFSET:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_FREQ_OFFSET\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_TX_FREQOFFSET_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_FREQ_OFFSET\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_FREQ_OFFSET is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_GET_STATISTICS:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_GET_STATISTICS\n"));
-
-				memcpy_exl(pAdapter, &pRaCfg->data[0], (UCHAR *)&pAdapter->ate.TxDoneCount, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[4], (UCHAR *)&pAdapter->WlanCounters.RetryCount.u.LowPart, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[8], (UCHAR *)&pAdapter->WlanCounters.FailedCount.u.LowPart, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[12], (UCHAR *)&pAdapter->WlanCounters.RTSSuccessCount.u.LowPart, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[16], (UCHAR *)&pAdapter->WlanCounters.RTSFailureCount.u.LowPart, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[20], (UCHAR *)&pAdapter->WlanCounters.ReceivedFragmentCount.QuadPart, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[24], (UCHAR *)&pAdapter->WlanCounters.FCSErrorCount.u.LowPart, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[28], (UCHAR *)&pAdapter->Counters8023.RxNoBuffer, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[32], (UCHAR *)&pAdapter->WlanCounters.FrameDuplicateCount.u.LowPart, 4);
-				memcpy_exl(pAdapter, &pRaCfg->data[36], (UCHAR *)&pAdapter->RalinkCounters.OneSecFalseCCACnt, 4);
-
-				if (pAdapter->ate.RxAntennaSel == 0)
-				{
-					INT32 RSSI0 = 0;
-					INT32 RSSI1 = 0;
-					INT32 RSSI2 = 0;
-
-					RSSI0 = (INT32)(pAdapter->ate.LastRssi0 - pAdapter->BbpRssiToDbmDelta);
-					RSSI1 = (INT32)(pAdapter->ate.LastRssi1 - pAdapter->BbpRssiToDbmDelta);
-					RSSI2 = (INT32)(pAdapter->ate.LastRssi2 - pAdapter->BbpRssiToDbmDelta);
-					memcpy_exl(pAdapter, &pRaCfg->data[40], (UCHAR *)&RSSI0, 4);
-					memcpy_exl(pAdapter, &pRaCfg->data[44], (UCHAR *)&RSSI1, 4);
-					memcpy_exl(pAdapter, &pRaCfg->data[48], (UCHAR *)&RSSI2, 4);
-					pRaCfg->length = htons(2+52);
-				}
-				else
-				{
-					INT32 RSSI0 = 0;
-
-					RSSI0 = (INT32)(pAdapter->ate.LastRssi0 - pAdapter->BbpRssiToDbmDelta);
-					memcpy_exl(pAdapter, &pRaCfg->data[40], (UCHAR *)&RSSI0, 4);
-					pRaCfg->length = htons(2+44);
-				}
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_GET_STATISTICS\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_GET_STATISTICS is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_RESET_COUNTER:
-			{
-				SHORT    value = 1;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_RESET_COUNTER\n"));
-
-				sprintf((PCHAR)str, "%d", value);
-				Set_ResetStatCounter_Proc(pAdapter, str);
-
-				pAdapter->ate.TxDoneCount = 0;
-
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_RESET_COUNTER\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_RESET_COUNTER is done !\n"));
-				}
-			}
-
-			break;
-
-		case RACFG_CMD_ATE_SEL_TX_ANTENNA:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SEL_TX_ANTENNA\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_TX_Antenna_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SEL_TX_ANTENNA\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SEL_TX_ANTENNA is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SEL_RX_ANTENNA:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SEL_RX_ANTENNA\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_RX_Antenna_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SEL_RX_ANTENNA\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SEL_RX_ANTENNA is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_PREAMBLE:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_PREAMBLE\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_TX_MODE_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_PREAMBLE\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_PREAMBLE is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_CHANNEL:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_CHANNEL\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_CHANNEL_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_CHANNEL\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_CHANNEL is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_ADDR1:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_ADDR1\n"));
-
-				// Addr is an array of UCHAR,
-				// so no need to perform endian swap.
-				memcpy(pAdapter->ate.Addr1, (PUCHAR)(pRaCfg->data - 2), MAC_ADDR_LEN);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_ADDR1\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-					ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_ADDR1 is done !\n (ADDR1 = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAdapter->ate.Addr1[0],
-						pAdapter->ate.Addr1[1], pAdapter->ate.Addr1[2], pAdapter->ate.Addr1[3], pAdapter->ate.Addr1[4], pAdapter->ate.Addr1[5]));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_ADDR2:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_ADDR2\n"));
-
-				// Addr is an array of UCHAR,
-				// so no need to perform endian swap.
-				memcpy(pAdapter->ate.Addr2, (PUCHAR)(pRaCfg->data - 2), MAC_ADDR_LEN);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_ADDR2\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-					ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_ADDR2 is done !\n (ADDR2 = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAdapter->ate.Addr2[0],
-						pAdapter->ate.Addr2[1], pAdapter->ate.Addr2[2], pAdapter->ate.Addr2[3], pAdapter->ate.Addr2[4], pAdapter->ate.Addr2[5]));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_ADDR3:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_ADDR3\n"));
-
-				// Addr is an array of UCHAR,
-				// so no need to perform endian swap.
-				memcpy(pAdapter->ate.Addr3, (PUCHAR)(pRaCfg->data - 2), MAC_ADDR_LEN);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_ADDR3\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-					ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_ADDR3 is done !\n (ADDR3 = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAdapter->ate.Addr3[0],
-						pAdapter->ate.Addr3[1], pAdapter->ate.Addr3[2], pAdapter->ate.Addr3[3], pAdapter->ate.Addr3[4], pAdapter->ate.Addr3[5]));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_RATE:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_RATE\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_TX_MCS_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_RATE\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_RATE is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_TX_FRAME_LEN:
-			{
-				SHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_TX_FRAME_LEN\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				sprintf((PCHAR)str, "%d", value);
-				Set_ATE_TX_LENGTH_Proc(pAdapter, str);
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_TX_FRAME_LEN\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_TX_FRAME_LEN is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_SET_TX_FRAME_COUNT:
-			{
-				USHORT    value = 0;
-				UCHAR    str[LEN_OF_ARG];
-
-				NdisZeroMemory(str, LEN_OF_ARG);
-
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_TX_FRAME_COUNT\n"));
-
-				memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
-				value = ntohs(value);
-				{
-					sprintf((PCHAR)str, "%d", value);
-					Set_ATE_TX_COUNT_Proc(pAdapter, str);
-				}
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_TX_FRAME_COUNT\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_TX_FRAME_COUNT is done !\n"));
-				}
-			}
-			break;
-
-		case RACFG_CMD_ATE_START_RX_FRAME:
-			{
-				ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_RX_START\n"));
-
-				Set_ATE_Proc(pAdapter, "RXFRAME");
-
-				// prepare feedback
-				pRaCfg->length = htons(2);
-				pRaCfg->status = htons(0);
-				wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-									+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-									+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-            	if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-            	{
-            		ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_RX_START\n"));
-                    Status = -EFAULT;
-            	}
-				else
-				{
-                	ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_RX_START is done !\n"));
-				}
-			}
-			break;
-		default:
-			break;
-	}
-    ASSERT(pRaCfg != NULL);
-    if (pRaCfg != NULL)
-    {
-    kfree(pRaCfg);
-    }
-	return;
-}
-
-VOID BubbleSort(INT32 n, INT32 a[])
-{
-	INT32 k, j, temp;
-
-	for (k = n-1;  k>0;  k--)
-	{
-		for (j = 0; j<k; j++)
-		{
-			if(a[j] > a[j+1])
-			{
-				temp = a[j];
-				a[j]=a[j+1];
-				a[j+1]=temp;
-			}
-		}
-	}
-}
-
-VOID CalNoiseLevel(PRTMP_ADAPTER pAd, UCHAR channel, INT32 RSSI[3][10])
-{
-	INT32		RSSI0, RSSI1, RSSI2;
- 	CHAR		Rssi0Offset, Rssi1Offset, Rssi2Offset;
-	UCHAR		BbpR50Rssi0 = 0, BbpR51Rssi1 = 0, BbpR52Rssi2 = 0;
-	UCHAR		Org_BBP66value = 0, Org_BBP69value = 0, Org_BBP70value = 0, data = 0;
-	USHORT		LNA_Gain = 0;
-	INT32       j = 0;
-	UCHAR		Org_Channel = pAd->ate.Channel;
-	USHORT	    GainValue = 0, OffsetValue = 0;
-
-	ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66, &Org_BBP66value);
-	ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R69, &Org_BBP69value);
-	ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R70, &Org_BBP70value);
-
-	//**********************************************************************
-	// Read the value of LNA gain and Rssi offset
-	//**********************************************************************
-	RT28xx_EEPROM_READ16(pAd, EEPROM_LNA_OFFSET, GainValue);
-
-	// for Noise Level
-	if (channel <= 14)
-	{
-		LNA_Gain = GainValue & 0x00FF;
-
-		RT28xx_EEPROM_READ16(pAd, EEPROM_RSSI_BG_OFFSET, OffsetValue);
-		Rssi0Offset = OffsetValue & 0x00FF;
-		Rssi1Offset = (OffsetValue & 0xFF00) >> 8;
-		RT28xx_EEPROM_READ16(pAd, (EEPROM_RSSI_BG_OFFSET + 2)/* 0x48 */, OffsetValue);
-		Rssi2Offset = OffsetValue & 0x00FF;
-	}
-	else
-	{
-		LNA_Gain = (GainValue & 0xFF00) >> 8;
-
-		RT28xx_EEPROM_READ16(pAd, EEPROM_RSSI_A_OFFSET, OffsetValue);
-		Rssi0Offset = OffsetValue & 0x00FF;
-		Rssi1Offset = (OffsetValue & 0xFF00) >> 8;
-		RT28xx_EEPROM_READ16(pAd, (EEPROM_RSSI_A_OFFSET + 2)/* 0x4C */, OffsetValue);
-		Rssi2Offset = OffsetValue & 0x00FF;
-	}
-	//**********************************************************************
-	{
-		pAd->ate.Channel = channel;
-		ATEAsicSwitchChannel(pAd);
-		mdelay(5);
-
-		data = 0x10;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, data);
-		data = 0x40;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, data);
-		data = 0x40;
-		ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, data);
-		mdelay(5);
-
-		// Start Rx
-		pAd->ate.bQARxStart = TRUE;
-		Set_ATE_Proc(pAd, "RXFRAME");
-
-		mdelay(5);
-
-		for (j = 0; j < 10; j++)
-		{
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R50, &BbpR50Rssi0);
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R51, &BbpR51Rssi1);
-			ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R52, &BbpR52Rssi2);
-
-			mdelay(10);
-
-			// Calculate RSSI 0
-			if (BbpR50Rssi0 == 0)
-			{
-				RSSI0 = -100;
-			}
-			else
-			{
-				RSSI0 = (INT32)(-12 - BbpR50Rssi0 - LNA_Gain - Rssi0Offset);
-			}
-			RSSI[0][j] = RSSI0;
-
-			if ( pAd->Antenna.field.RxPath >= 2 ) // 2R
-			{
-				// Calculate RSSI 1
-				if (BbpR51Rssi1 == 0)
-				{
-					RSSI1 = -100;
-				}
-				else
-				{
-					RSSI1 = (INT32)(-12 - BbpR51Rssi1 - LNA_Gain - Rssi1Offset);
-				}
-				RSSI[1][j] = RSSI1;
-			}
-
-			if ( pAd->Antenna.field.RxPath >= 3 ) // 3R
-			{
-				// Calculate RSSI 2
-				if (BbpR52Rssi2 == 0)
-					RSSI2 = -100;
-				else
-					RSSI2 = (INT32)(-12 - BbpR52Rssi2 - LNA_Gain - Rssi2Offset);
-
-				RSSI[2][j] = RSSI2;
-			}
-		}
-
-		// Stop Rx
-		Set_ATE_Proc(pAd, "RXSTOP");
-
-		mdelay(5);
-
-		BubbleSort(10, RSSI[0]);	// 1R
-
-		if ( pAd->Antenna.field.RxPath >= 2 ) // 2R
-		{
-			BubbleSort(10, RSSI[1]);
-		}
-
-		if ( pAd->Antenna.field.RxPath >= 3 ) // 3R
-		{
-			BubbleSort(10, RSSI[2]);
-		}
-
-	}
-
-	pAd->ate.Channel = Org_Channel;
-	ATEAsicSwitchChannel(pAd);
-
-	// Restore original value
-    ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, Org_BBP66value);
-    ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, Org_BBP69value);
-    ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, Org_BBP70value);
-
-	return;
-}
-
-BOOLEAN SyncTxRxConfig(PRTMP_ADAPTER pAd, USHORT offset, UCHAR value)
-{
-	UCHAR tmp = 0, bbp_data = 0;
-
-	if (ATE_ON(pAd))
-	{
-		ATE_BBP_IO_READ8_BY_REG_ID(pAd, offset, &bbp_data);
-	}
-	else
-	{
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, offset, &bbp_data);
-	}
-
-	/* confirm again */
-	ASSERT(bbp_data == value);
-
-	switch(offset)
-	{
-		case BBP_R1:
-			/* Need to sync. tx configuration with legacy ATE. */
-			tmp = (bbp_data & ((1 << 4) | (1 << 3))/* 0x18 */) >> 3;
-		    switch(tmp)
-		    {
-				/* The BBP R1 bit[4:3] = 2 :: Both DACs will be used by QA. */
-		        case 2:
-					/* All */
-					pAd->ate.TxAntennaSel = 0;
-		            break;
-				/* The BBP R1 bit[4:3] = 0 :: DAC 0 will be used by QA. */
-		        case 0:
-					/* Antenna one */
-					pAd->ate.TxAntennaSel = 1;
-		            break;
-				/* The BBP R1 bit[4:3] = 1 :: DAC 1 will be used by QA. */
-		        case 1:
-					/* Antenna two */
-					pAd->ate.TxAntennaSel = 2;
-		            break;
-		        default:
-		            DBGPRINT(RT_DEBUG_TRACE, ("%s -- Sth. wrong!  : return FALSE; \n", __FUNCTION__));
-		            return FALSE;
-		    }
-			break;/* case BBP_R1 */
-
-		case BBP_R3:
-			/* Need to sync. rx configuration with legacy ATE. */
-			tmp = (bbp_data & ((1 << 1) | (1 << 0))/* 0x03 */);
-		    switch(tmp)
-		    {
-				/* The BBP R3 bit[1:0] = 3 :: All ADCs will be used by QA. */
-		        case 3:
-					/* All */
-					pAd->ate.RxAntennaSel = 0;
-		            break;
-				/* The BBP R3 bit[1:0] = 0 :: ADC 0 will be used by QA, */
-				/* unless the BBP R3 bit[4:3] = 2 */
-		        case 0:
-					/* Antenna one */
-					pAd->ate.RxAntennaSel = 1;
-					tmp = ((bbp_data & ((1 << 4) | (1 << 3))/* 0x03 */) >> 3);
-					if (tmp == 2)// 3R
-					{
-						/* Default : All ADCs will be used by QA */
-						pAd->ate.RxAntennaSel = 0;
-					}
-		            break;
-				/* The BBP R3 bit[1:0] = 1 :: ADC 1 will be used by QA. */
-		        case 1:
-					/* Antenna two */
-					pAd->ate.RxAntennaSel = 2;
-		            break;
-				/* The BBP R3 bit[1:0] = 2 :: ADC 2 will be used by QA. */
-		        case 2:
-					/* Antenna three */
-					pAd->ate.RxAntennaSel = 3;
-		            break;
-		        default:
-		            DBGPRINT(RT_DEBUG_ERROR, ("%s -- Impossible!  : return FALSE; \n", __FUNCTION__));
-		            return FALSE;
-		    }
-			break;/* case BBP_R3 */
-
-        default:
-            DBGPRINT(RT_DEBUG_ERROR, ("%s -- Sth. wrong!  : return FALSE; \n", __FUNCTION__));
-            return FALSE;
-
-	}
-	return TRUE;
-}
-
-static VOID memcpy_exl(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len)
-{
-	ULONG i, Value = 0;
-	ULONG *pDst, *pSrc;
-	UCHAR *p8;
-
-	p8 = src;
-	pDst = (ULONG *) dst;
-	pSrc = (ULONG *) src;
-
-	for (i = 0 ; i < (len/4); i++)
-	{
-		/* For alignment issue, we need a variable "Value". */
-		memmove(&Value, pSrc, 4);
-		Value = htonl(Value);
-		memmove(pDst, &Value, 4);
-		pDst++;
-		pSrc++;
-	}
-	if ((len % 4) != 0)
-	{
-		/* wish that it will never reach here */
-		memmove(&Value, pSrc, (len % 4));
-		Value = htonl(Value);
-		memmove(pDst, &Value, (len % 4));
-	}
-}
-
-static VOID memcpy_exs(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len)
-{
-	ULONG i;
-	UCHAR *pDst, *pSrc;
-
-	pDst = dst;
-	pSrc = src;
-
-	for (i = 0; i < (len/2); i++)
-	{
-		memmove(pDst, pSrc, 2);
-		*((USHORT *)pDst) = htons(*((USHORT *)pDst));
-		pDst+=2;
-		pSrc+=2;
-	}
-
-	if ((len % 2) != 0)
-	{
-		memmove(pDst, pSrc, 1);
-	}
-}
-
-static VOID RTMP_IO_READ_BULK(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, UINT32 len)
-{
-	UINT32 i, Value;
-	UINT32 *pDst, *pSrc;
-
-	pDst = (UINT32 *) dst;
-	pSrc = (UINT32 *) src;
-
-	for (i = 0 ; i < (len/4); i++)
-	{
-		RTMP_IO_READ32(pAd, (ULONG)pSrc, &Value);
-		Value = htonl(Value);
-		memmove(pDst, &Value, 4);
-		pDst++;
-		pSrc++;
-	}
-	return;
-}
-
-INT Set_TxStop_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ATEDBGPRINT(RT_DEBUG_TRACE,("Set_TxStop_Proc\n"));
-
-	if (Set_ATE_Proc(pAd, "TXSTOP"))
-	{
-	return TRUE;
-}
-	else
-	{
-		return FALSE;
-	}
-}
-
-INT Set_RxStop_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	ATEDBGPRINT(RT_DEBUG_TRACE,("Set_RxStop_Proc\n"));
-
-	if (Set_ATE_Proc(pAd, "RXSTOP"))
-	{
-	return TRUE;
-}
-	else
-	{
-		return FALSE;
-	}
-}
-#endif	// RALINK_28xx_QA //
-#endif	// RALINK_ATE //
-
diff --git a/drivers/staging/rt3070/rt_ate.h b/drivers/staging/rt3070/rt_ate.h
deleted file mode 100644
index 829ebb5f723..00000000000
--- a/drivers/staging/rt3070/rt_ate.h
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-#ifndef __ATE_H__
-#define __ATE_H__
-
-#ifndef UCOS
-#define ate_print printk
-#define ATEDBGPRINT DBGPRINT
-
-#ifdef RT2870
-#define EEPROM_SIZE								0x400
-#ifdef CONFIG_STA_SUPPORT
-#define EEPROM_BIN_FILE_NAME  "/etc/Wireless/RT2870STA/e2p.bin"
-#endif // CONFIG_STA_SUPPORT //
-#endif // RT2870 //
-#else // !UCOS //
-#define fATE_LOAD_EEPROM						0x0C43
-#ifdef CONFIG_PRINTK
-extern INT ConsoleResponse(IN PUCHAR buff);
-extern int (*remote_display)(char *);
-extern void puts (const char *s);
-
-/* specificly defined to redirect and show ate-related messages to host. */
-/* Try to define ate_print as a macro. */
-#define ate_print(fmt, args...)                 \
-do{   int (*org_remote_display)(char *) = NULL;   \
-	org_remote_display = remote_display;\
-	/* Save original "remote_display" */\
-	remote_display = (int (*)(char *))ConsoleResponse;           \
-	printk(fmt, ## args);                       \
-	/* Restore the remote_display function pointer */        \
-	remote_display = org_remote_display; }while(0)
-
-#define ATEDBGPRINT(Level, Fmt)    	\
-{                                   \
-    if ((Level) <= RTDebugLevel)      \
-    {                               \
-        ate_print Fmt;					\
-    }                               \
-}
-#endif // CONFIG_PRINTK //
-#endif // !UCOS //
-
-#define ATE_ON(_p)              (((_p)->ate.Mode) != ATE_STOP)
-
-/* RT2880_iNIC will define "RT2860". */
-
-/* RT2880_iNIC will define RT2860. */
-
-#ifdef RT2870
-#define EEPROM_SIZE								0x400
-#ifdef CONFIG_STA_SUPPORT
-#define EEPROM_BIN_FILE_NAME  "/etc/Wireless/RT2870STA/e2p.bin"
-#endif // CONFIG_STA_SUPPORT //
-#endif // RT2870 //
-
-#ifdef RT2870
-#define ATE_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV)    RTMP_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV)
-#define ATE_BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V)    RTMP_BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V)
-
-#define BULK_OUT_LOCK(pLock, IrqFlags)	\
-		if(1 /*!(in_interrupt() & 0xffff0000)*/)	\
-			RTMP_IRQ_LOCK((pLock), IrqFlags);
-
-#define BULK_OUT_UNLOCK(pLock, IrqFlags)	\
-		if(1 /*!(in_interrupt() & 0xffff0000)*/)	\
-			RTMP_IRQ_UNLOCK((pLock), IrqFlags);
-
-// Prototypes of completion funuc.
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-#define ATE_RTUSBBulkOutDataPacketComplete(purb, pt_regs)    ATE_RTUSBBulkOutDataPacketComplete(purb)
-#endif
-
-VOID ATE_RTUSBBulkOutDataPacketComplete(
-	IN purbb_t purb,
-	OUT struct pt_regs *pt_regs);
-
-VOID ATE_RTUSBBulkOutDataPacket(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			BulkOutPipeId);
-
-VOID ATE_RTUSBCancelPendingBulkInIRP(
-	IN	PRTMP_ADAPTER	pAd);
-#endif // RT2870 //
-
-#ifdef RT30xx
-#define ATE_RF_IO_READ8_BY_REG_ID(_A, _I, _pV)     RTMP_RF_IO_READ8_BY_REG_ID(_A, _I, _pV)
-#define ATE_RF_IO_WRITE8_BY_REG_ID(_A, _I, _V)     RTMP_RF_IO_WRITE8_BY_REG_ID(_A, _I, _V)
-#endif // RT30xx //
-
-
-VOID rt_ee_read_all(
-	IN  PRTMP_ADAPTER   pAd,
-	OUT USHORT *Data);
-
-
-VOID rt_ee_write_all(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  USHORT *Data);
-
-INT Set_ATE_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_DA_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_SA_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_BSSID_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_CHANNEL_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_POWER0_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_POWER1_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_Antenna_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_RX_Antenna_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_FREQOFFSET_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_BW_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_LENGTH_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_COUNT_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_MCS_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_MODE_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_GI_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-
-INT	Set_ATE_RX_FER_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Read_RF_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Write_RF1_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Write_RF2_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Write_RF3_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Write_RF4_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Load_E2P_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Read_E2P_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_Show_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_Help_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-#ifdef RALINK_ATE
-#ifdef RALINK_28xx_QA
-VOID ATE_QA_Statistics(
-	IN PRTMP_ADAPTER		pAd,
-	IN PRXWI_STRUC			pRxWI,
-	IN PRT28XX_RXD_STRUC    p28xxRxD,
-	IN PHEADER_802_11		pHeader);
-
-VOID RtmpDoAte(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq);
-
-VOID BubbleSort(
-	IN  INT32 n,
-	IN  INT32 a[]);
-
-VOID CalNoiseLevel(
-	IN  PRTMP_ADAPTER   pAdapter,
-	IN  UCHAR           channel,
-	OUT INT32           buffer[3][10]);
-
-BOOLEAN SyncTxRxConfig(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	USHORT			offset,
-	IN	UCHAR			value);
-
-INT Set_TxStop_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_RxStop_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
-VOID ATEAsicSwitchChannel(
-	IN PRTMP_ADAPTER pAd);
-
-VOID ATEAsicAdjustTxPower(
-	IN PRTMP_ADAPTER pAd);
-
-VOID ATEDisableAsicProtect(
-	IN		PRTMP_ADAPTER	pAd);
-
-CHAR ATEConvertToRssi(
-	IN PRTMP_ADAPTER  pAd,
-	IN CHAR				Rssi,
-	IN UCHAR    RssiNumber);
-
-VOID ATESampleRssi(
-	IN PRTMP_ADAPTER	pAd,
-	IN PRXWI_STRUC		pRxWI);
-
-
-#ifdef CONFIG_STA_SUPPORT
-VOID RTMPStationStop(
-    IN  PRTMP_ADAPTER   pAd);
-
-VOID RTMPStationStart(
-    IN  PRTMP_ADAPTER   pAd);
-#endif // CONFIG_STA_SUPPORT //
-#endif // __ATE_H__ //
diff --git a/drivers/staging/rt3070/rt_config.h b/drivers/staging/rt3070/rt_config.h
index 9e06417f63d..3e8fcbdd579 100644
--- a/drivers/staging/rt3070/rt_config.h
+++ b/drivers/staging/rt3070/rt_config.h
@@ -1,121 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	rt_config.h
-
-	Abstract:
-	Central header file to maintain all include files for all NDIS
-	miniport driver routines.
-
-	Revision History:
-	Who         When          What
-	--------    ----------    ----------------------------------------------
-	Paul Lin    08-01-2002    created
-
-*/
-#ifndef	__RT_CONFIG_H__
-#define	__RT_CONFIG_H__
-
-#include    "rtmp_type.h"
-#ifdef UCOS
-#include "includes.h"
-#include <stdio.h>
-#include 	"rt_ucos.h"
-#endif
-
-#ifdef LINUX
-#include	"rt_linux.h"
-#endif
-#include    "rtmp_def.h"
-#include    "rt28xx.h"
-
-
-#ifdef RT2870
-#include	"rt2870.h"
-#endif // RT2870 //
-
-#include    "oid.h"
-#include    "mlme.h"
-#include    "wpa.h"
-#include    "md5.h"
-#include    "rtmp.h"
-#include	"ap.h"
-#include	"dfs.h"
-#include	"chlist.h"
-#include	"spectrum.h"
-#ifdef MLME_EX
-#include	"mlme_ex_def.h"
-#include	"mlme_ex.h"
-#endif // MLME_EX //
-
-#undef AP_WSC_INCLUDED
-#undef STA_WSC_INCLUDED
-#undef WSC_INCLUDED
-
-
-#ifdef LEAP_SUPPORT
-#include    "leap.h"
-#endif // LEAP_SUPPORT //
-
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef BLOCK_NET_IF
-#include "netif_block.h"
-#endif // BLOCK_NET_IF //
-
-#ifdef IGMP_SNOOP_SUPPORT
-#include "igmp_snoop.h"
-#endif // IGMP_SNOOP_SUPPORT //
-
-#ifdef RALINK_ATE
-#include "rt_ate.h"
-#endif // RALINK_ATE //
-
-
-
-#if defined(AP_WSC_INCLUDED) || defined(STA_WSC_INCLUDED)
-#define WSC_INCLUDED
-#endif
-
-
-#ifdef CONFIG_STA_SUPPORT
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-#ifndef WPA_SUPPLICANT_SUPPORT
-#error "Build for being controlled by NetworkManager or wext, please set HAS_WPA_SUPPLICANT=y and HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y"
-#endif // WPA_SUPPLICANT_SUPPORT //
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-
-#endif // CONFIG_STA_SUPPORT //
-
-
-#ifdef IKANOS_VX_1X0
-#include	"vr_ikans.h"
-#endif // IKANOS_VX_1X0 //
-
-#endif	// __RT_CONFIG_H__
-
+#include "../rt2870/rt_config.h"
diff --git a/drivers/staging/rt3070/rt_linux.c b/drivers/staging/rt3070/rt_linux.c
index bf3385365da..6185f2e9992 100644
--- a/drivers/staging/rt3070/rt_linux.c
+++ b/drivers/staging/rt3070/rt_linux.c
@@ -1,1063 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-#include "rt_config.h"
-
-ULONG	RTDebugLevel = RT_DEBUG_ERROR;
-
-BUILD_TIMER_FUNCTION(MlmePeriodicExec);
-//BUILD_TIMER_FUNCTION(MlmeRssiReportExec);
-BUILD_TIMER_FUNCTION(AsicRxAntEvalTimeout);
-BUILD_TIMER_FUNCTION(APSDPeriodicExec);
-BUILD_TIMER_FUNCTION(AsicRfTuningExec);
-#ifdef RT2870
-BUILD_TIMER_FUNCTION(BeaconUpdateExec);
-#endif // RT2870 //
-
-
-#ifdef CONFIG_STA_SUPPORT
-BUILD_TIMER_FUNCTION(BeaconTimeout);
-BUILD_TIMER_FUNCTION(ScanTimeout);
-BUILD_TIMER_FUNCTION(AuthTimeout);
-BUILD_TIMER_FUNCTION(AssocTimeout);
-BUILD_TIMER_FUNCTION(ReassocTimeout);
-BUILD_TIMER_FUNCTION(DisassocTimeout);
-BUILD_TIMER_FUNCTION(LinkDownExec);
-#ifdef LEAP_SUPPORT
-BUILD_TIMER_FUNCTION(LeapAuthTimeout);
-#endif
-BUILD_TIMER_FUNCTION(StaQuickResponeForRateUpExec);
-BUILD_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc);
-#ifdef QOS_DLS_SUPPORT
-BUILD_TIMER_FUNCTION(DlsTimeoutAction);
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
-
-
-
-// for wireless system event message
-char const *pWirelessSysEventText[IW_SYS_EVENT_TYPE_NUM] = {
-	// system status event
-    "had associated successfully",							/* IW_ASSOC_EVENT_FLAG */
-    "had disassociated",									/* IW_DISASSOC_EVENT_FLAG */
-    "had deauthenticated",									/* IW_DEAUTH_EVENT_FLAG */
-    "had been aged-out and disassociated",					/* IW_AGEOUT_EVENT_FLAG */
-    "occurred CounterMeasures attack",						/* IW_COUNTER_MEASURES_EVENT_FLAG */
-    "occurred replay counter different in Key Handshaking",	/* IW_REPLAY_COUNTER_DIFF_EVENT_FLAG */
-    "occurred RSNIE different in Key Handshaking",			/* IW_RSNIE_DIFF_EVENT_FLAG */
-    "occurred MIC different in Key Handshaking",			/* IW_MIC_DIFF_EVENT_FLAG */
-    "occurred ICV error in RX",								/* IW_ICV_ERROR_EVENT_FLAG */
-    "occurred MIC error in RX",								/* IW_MIC_ERROR_EVENT_FLAG */
-	"Group Key Handshaking timeout",						/* IW_GROUP_HS_TIMEOUT_EVENT_FLAG */
-	"Pairwise Key Handshaking timeout",						/* IW_PAIRWISE_HS_TIMEOUT_EVENT_FLAG */
-	"RSN IE sanity check failure",							/* IW_RSNIE_SANITY_FAIL_EVENT_FLAG */
-	"set key done in WPA/WPAPSK",							/* IW_SET_KEY_DONE_WPA1_EVENT_FLAG */
-	"set key done in WPA2/WPA2PSK",                         /* IW_SET_KEY_DONE_WPA2_EVENT_FLAG */
-	"connects with our wireless client",                    /* IW_STA_LINKUP_EVENT_FLAG */
-	"disconnects with our wireless client",                 /* IW_STA_LINKDOWN_EVENT_FLAG */
-	"scan completed"										/* IW_SCAN_COMPLETED_EVENT_FLAG */
-	"scan terminate!! Busy!! Enqueue fail!!"				/* IW_SCAN_ENQUEUE_FAIL_EVENT_FLAG */
-	};
-
-// for wireless IDS_spoof_attack event message
-char const *pWirelessSpoofEventText[IW_SPOOF_EVENT_TYPE_NUM] = {
-    "detected conflict SSID",								/* IW_CONFLICT_SSID_EVENT_FLAG */
-    "detected spoofed association response",				/* IW_SPOOF_ASSOC_RESP_EVENT_FLAG */
-    "detected spoofed reassociation responses",				/* IW_SPOOF_REASSOC_RESP_EVENT_FLAG */
-    "detected spoofed probe response",						/* IW_SPOOF_PROBE_RESP_EVENT_FLAG */
-    "detected spoofed beacon",								/* IW_SPOOF_BEACON_EVENT_FLAG */
-    "detected spoofed disassociation",						/* IW_SPOOF_DISASSOC_EVENT_FLAG */
-    "detected spoofed authentication",						/* IW_SPOOF_AUTH_EVENT_FLAG */
-    "detected spoofed deauthentication",					/* IW_SPOOF_DEAUTH_EVENT_FLAG */
-    "detected spoofed unknown management frame",			/* IW_SPOOF_UNKNOWN_MGMT_EVENT_FLAG */
-	"detected replay attack"								/* IW_REPLAY_ATTACK_EVENT_FLAG */
-	};
-
-// for wireless IDS_flooding_attack event message
-char const *pWirelessFloodEventText[IW_FLOOD_EVENT_TYPE_NUM] = {
-	"detected authentication flooding",						/* IW_FLOOD_AUTH_EVENT_FLAG */
-    "detected association request flooding",				/* IW_FLOOD_ASSOC_REQ_EVENT_FLAG */
-    "detected reassociation request flooding",				/* IW_FLOOD_REASSOC_REQ_EVENT_FLAG */
-    "detected probe request flooding",						/* IW_FLOOD_PROBE_REQ_EVENT_FLAG */
-    "detected disassociation flooding",						/* IW_FLOOD_DISASSOC_EVENT_FLAG */
-    "detected deauthentication flooding",					/* IW_FLOOD_DEAUTH_EVENT_FLAG */
-    "detected 802.1x eap-request flooding"					/* IW_FLOOD_EAP_REQ_EVENT_FLAG */
-	};
-
-
-/* timeout -- ms */
-VOID RTMP_SetPeriodicTimer(
-	IN	NDIS_MINIPORT_TIMER *pTimer,
-	IN	unsigned long timeout)
-{
-	timeout = ((timeout*HZ) / 1000);
-	pTimer->expires = jiffies + timeout;
-	add_timer(pTimer);
-}
-
-/* convert NdisMInitializeTimer --> RTMP_OS_Init_Timer */
-VOID RTMP_OS_Init_Timer(
-	IN	PRTMP_ADAPTER pAd,
-	IN	NDIS_MINIPORT_TIMER *pTimer,
-	IN	TIMER_FUNCTION function,
-	IN	PVOID data)
-{
-	init_timer(pTimer);
-    pTimer->data = (unsigned long)data;
-    pTimer->function = function;
-}
-
-
-VOID RTMP_OS_Add_Timer(
-	IN	NDIS_MINIPORT_TIMER		*pTimer,
-	IN	unsigned long timeout)
-{
-	if (timer_pending(pTimer))
-		return;
-
-	timeout = ((timeout*HZ) / 1000);
-	pTimer->expires = jiffies + timeout;
-	add_timer(pTimer);
-}
-
-VOID RTMP_OS_Mod_Timer(
-	IN	NDIS_MINIPORT_TIMER		*pTimer,
-	IN	unsigned long timeout)
-{
-	timeout = ((timeout*HZ) / 1000);
-	mod_timer(pTimer, jiffies + timeout);
-}
-
-VOID RTMP_OS_Del_Timer(
-	IN	NDIS_MINIPORT_TIMER		*pTimer,
-	OUT	BOOLEAN					*pCancelled)
-{
-	if (timer_pending(pTimer))
-	{
-		*pCancelled = del_timer_sync(pTimer);
-	}
-	else
-	{
-		*pCancelled = TRUE;
-	}
-
-}
-
-VOID RTMP_OS_Release_Packet(
-	IN	PRTMP_ADAPTER pAd,
-	IN	PQUEUE_ENTRY  pEntry)
-{
-	//RTMPFreeNdisPacket(pAd, (struct sk_buff *)pEntry);
-}
-
-// Unify all delay routine by using udelay
-VOID RTMPusecDelay(
-	IN	ULONG	usec)
-{
-	ULONG	i;
-
-	for (i = 0; i < (usec / 50); i++)
-		udelay(50);
-
-	if (usec % 50)
-		udelay(usec % 50);
-}
-
-void RTMP_GetCurrentSystemTime(LARGE_INTEGER *time)
-{
-	time->u.LowPart = jiffies;
-}
-
-// pAd MUST allow to be NULL
-NDIS_STATUS os_alloc_mem(
-	IN	PRTMP_ADAPTER pAd,
-	OUT	PUCHAR *mem,
-	IN	ULONG  size)
-{
-	*mem = (PUCHAR) kmalloc(size, GFP_ATOMIC);
-	if (*mem)
-		return (NDIS_STATUS_SUCCESS);
-	else
-		return (NDIS_STATUS_FAILURE);
-}
-
-// pAd MUST allow to be NULL
-NDIS_STATUS os_free_mem(
-	IN	PRTMP_ADAPTER pAd,
-	IN	PUCHAR mem)
-{
-
-	ASSERT(mem);
-	kfree(mem);
-	return (NDIS_STATUS_SUCCESS);
-}
-
-
-PNDIS_PACKET RTMP_AllocateFragPacketBuffer(
-	IN	PRTMP_ADAPTER pAd,
-	IN	ULONG	Length)
-{
-	struct sk_buff *pkt;
-
-	pkt = dev_alloc_skb(Length);
-
-	if (pkt == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("can't allocate frag rx %ld size packet\n",Length));
-	}
-
-	if (pkt)
-	{
-		RTMP_SET_PACKET_SOURCE(OSPKT_TO_RTPKT(pkt), PKTSRC_NDIS);
-	}
-
-	return (PNDIS_PACKET) pkt;
-}
-
-
-PNDIS_PACKET RTMP_AllocateTxPacketBuffer(
-	IN	PRTMP_ADAPTER pAd,
-	IN	ULONG	Length,
-	IN	BOOLEAN	Cached,
-	OUT	PVOID	*VirtualAddress)
-{
-	struct sk_buff *pkt;
-
-	pkt = dev_alloc_skb(Length);
-
-	if (pkt == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("can't allocate tx %ld size packet\n",Length));
-	}
-
-	if (pkt)
-	{
-		RTMP_SET_PACKET_SOURCE(OSPKT_TO_RTPKT(pkt), PKTSRC_NDIS);
-		*VirtualAddress = (PVOID) pkt->data;
-	}
-	else
-	{
-		*VirtualAddress = (PVOID) NULL;
-	}
-
-	return (PNDIS_PACKET) pkt;
-}
-
-
-VOID build_tx_packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket,
-	IN	PUCHAR	pFrame,
-	IN	ULONG	FrameLen)
-{
-
-	struct sk_buff	*pTxPkt;
-
-	ASSERT(pPacket);
-	pTxPkt = RTPKT_TO_OSPKT(pPacket);
-
-	NdisMoveMemory(skb_put(pTxPkt, FrameLen), pFrame, FrameLen);
-}
-
-VOID	RTMPFreeAdapter(
-	IN	PRTMP_ADAPTER	pAd)
-{
-    POS_COOKIE os_cookie;
-	int index;
-
-	os_cookie=(POS_COOKIE)pAd->OS_Cookie;
-
-	kfree(pAd->BeaconBuf);
-
-
-	NdisFreeSpinLock(&pAd->MgmtRingLock);
-
-
-	for (index =0 ; index < NUM_OF_TX_RING; index++)
-	{
-    	NdisFreeSpinLock(&pAd->TxSwQueueLock[index]);
-		NdisFreeSpinLock(&pAd->DeQueueLock[index]);
-		pAd->DeQueueRunning[index] = FALSE;
-	}
-
-	NdisFreeSpinLock(&pAd->irq_lock);
-
-
-	vfree(pAd); // pci_free_consistent(os_cookie->pci_dev,sizeof(RTMP_ADAPTER),pAd,os_cookie->pAd_pa);
-	kfree(os_cookie);
-}
-
-BOOLEAN OS_Need_Clone_Packet(void)
-{
-	return (FALSE);
-}
-
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		clone an input NDIS PACKET to another one. The new internally created NDIS PACKET
-		must have only one NDIS BUFFER
-		return - byte copied. 0 means can't create NDIS PACKET
-		NOTE: internally created NDIS_PACKET should be destroyed by RTMPFreeNdisPacket
-
-	Arguments:
-		pAd 	Pointer to our adapter
-		pInsAMSDUHdr	EWC A-MSDU format has extra 14-bytes header. if TRUE, insert this 14-byte hdr in front of MSDU.
-		*pSrcTotalLen			return total packet length. This lenght is calculated with 802.3 format packet.
-
-	Return Value:
-		NDIS_STATUS_SUCCESS
-		NDIS_STATUS_FAILURE
-
-	Note:
-
-	========================================================================
-*/
-NDIS_STATUS RTMPCloneNdisPacket(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	BOOLEAN			pInsAMSDUHdr,
-	IN	PNDIS_PACKET	pInPacket,
-	OUT PNDIS_PACKET   *ppOutPacket)
-{
-
-	struct sk_buff *pkt;
-
-	ASSERT(pInPacket);
-	ASSERT(ppOutPacket);
-
-	// 1. Allocate a packet
-	pkt = dev_alloc_skb(2048);
-
-	if (pkt == NULL)
-	{
-		return NDIS_STATUS_FAILURE;
-	}
-
- 	skb_put(pkt, GET_OS_PKT_LEN(pInPacket));
-	NdisMoveMemory(pkt->data, GET_OS_PKT_DATAPTR(pInPacket), GET_OS_PKT_LEN(pInPacket));
-	*ppOutPacket = OSPKT_TO_RTPKT(pkt);
-
-
-	RTMP_SET_PACKET_SOURCE(OSPKT_TO_RTPKT(pkt), PKTSRC_NDIS);
-
-	printk("###Clone###\n");
-
-	return NDIS_STATUS_SUCCESS;
-}
-
-
-// the allocated NDIS PACKET must be freed via RTMPFreeNdisPacket()
-NDIS_STATUS RTMPAllocateNdisPacket(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT PNDIS_PACKET   *ppPacket,
-	IN	PUCHAR			pHeader,
-	IN	UINT			HeaderLen,
-	IN	PUCHAR			pData,
-	IN	UINT			DataLen)
-{
-	PNDIS_PACKET	pPacket;
-	ASSERT(pData);
-	ASSERT(DataLen);
-
-	// 1. Allocate a packet
-	pPacket = (PNDIS_PACKET *) dev_alloc_skb(HeaderLen + DataLen + TXPADDING_SIZE);
-	if (pPacket == NULL)
- 	{
-		*ppPacket = NULL;
-#ifdef DEBUG
-		printk("RTMPAllocateNdisPacket Fail\n\n");
-#endif
-		return NDIS_STATUS_FAILURE;
-	}
-
-	// 2. clone the frame content
-	if (HeaderLen > 0)
-		NdisMoveMemory(GET_OS_PKT_DATAPTR(pPacket), pHeader, HeaderLen);
-	if (DataLen > 0)
-		NdisMoveMemory(GET_OS_PKT_DATAPTR(pPacket) + HeaderLen, pData, DataLen);
-
-	// 3. update length of packet
- 	skb_put(GET_OS_PKT_TYPE(pPacket), HeaderLen+DataLen);
-
-	RTMP_SET_PACKET_SOURCE(pPacket, PKTSRC_NDIS);
-//	printk("%s : pPacket = %p, len = %d\n", __FUNCTION__, pPacket, GET_OS_PKT_LEN(pPacket));
-	*ppPacket = pPacket;
-	return NDIS_STATUS_SUCCESS;
-}
-
-/*
-  ========================================================================
-  Description:
-	This routine frees a miniport internally allocated NDIS_PACKET and its
-	corresponding NDIS_BUFFER and allocated memory.
-  ========================================================================
-*/
-VOID RTMPFreeNdisPacket(
-	IN PRTMP_ADAPTER pAd,
-	IN PNDIS_PACKET  pPacket)
-{
-	dev_kfree_skb_any(RTPKT_TO_OSPKT(pPacket));
-}
-
-
-// IRQL = DISPATCH_LEVEL
-// NOTE: we do have an assumption here, that Byte0 and Byte1 always reasid at the same
-//			 scatter gather buffer
-NDIS_STATUS Sniff2BytesFromNdisBuffer(
-	IN	PNDIS_BUFFER	pFirstBuffer,
-	IN	UCHAR			DesiredOffset,
-	OUT PUCHAR			pByte0,
-	OUT PUCHAR			pByte1)
-{
-    *pByte0 = *(PUCHAR)(pFirstBuffer + DesiredOffset);
-    *pByte1 = *(PUCHAR)(pFirstBuffer + DesiredOffset + 1);
-
-	return NDIS_STATUS_SUCCESS;
-}
-
-
-void RTMP_QueryPacketInfo(
-	IN  PNDIS_PACKET pPacket,
-	OUT PACKET_INFO  *pPacketInfo,
-	OUT PUCHAR		 *pSrcBufVA,
-	OUT	UINT		 *pSrcBufLen)
-{
-	pPacketInfo->BufferCount = 1;
-	pPacketInfo->pFirstBuffer = GET_OS_PKT_DATAPTR(pPacket);
-	pPacketInfo->PhysicalBufferCount = 1;
-	pPacketInfo->TotalPacketLength = GET_OS_PKT_LEN(pPacket);
-
-	*pSrcBufVA = GET_OS_PKT_DATAPTR(pPacket);
-	*pSrcBufLen = GET_OS_PKT_LEN(pPacket);
-}
-
-void RTMP_QueryNextPacketInfo(
-	IN  PNDIS_PACKET *ppPacket,
-	OUT PACKET_INFO  *pPacketInfo,
-	OUT PUCHAR		 *pSrcBufVA,
-	OUT	UINT		 *pSrcBufLen)
-{
-	PNDIS_PACKET pPacket = NULL;
-
-	if (*ppPacket)
-		pPacket = GET_OS_PKT_NEXT(*ppPacket);
-
-	if (pPacket)
-	{
-		pPacketInfo->BufferCount = 1;
-		pPacketInfo->pFirstBuffer = GET_OS_PKT_DATAPTR(pPacket);
-		pPacketInfo->PhysicalBufferCount = 1;
-		pPacketInfo->TotalPacketLength = GET_OS_PKT_LEN(pPacket);
-
-		*pSrcBufVA = GET_OS_PKT_DATAPTR(pPacket);
-		*pSrcBufLen = GET_OS_PKT_LEN(pPacket);
-		*ppPacket = GET_OS_PKT_NEXT(pPacket);
-	}
-	else
-	{
-		pPacketInfo->BufferCount = 0;
-		pPacketInfo->pFirstBuffer = NULL;
-		pPacketInfo->PhysicalBufferCount = 0;
-		pPacketInfo->TotalPacketLength = 0;
-
-		*pSrcBufVA = NULL;
-		*pSrcBufLen = 0;
-		*ppPacket = NULL;
-	}
-}
-
-// not yet support MBSS
-PNET_DEV get_netdev_from_bssid(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			FromWhichBSSID)
-{
-    PNET_DEV dev_p = NULL;
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		dev_p = pAd->net_dev;
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	ASSERT(dev_p);
-	return dev_p; /* return one of MBSS */
-}
-
-PNDIS_PACKET DuplicatePacket(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket,
-	IN	UCHAR			FromWhichBSSID)
-{
-	struct sk_buff	*skb;
-	PNDIS_PACKET	pRetPacket = NULL;
-	USHORT			DataSize;
-	UCHAR			*pData;
-
-	DataSize = (USHORT) GET_OS_PKT_LEN(pPacket);
-	pData = (PUCHAR) GET_OS_PKT_DATAPTR(pPacket);
-
-
-	skb = skb_clone(RTPKT_TO_OSPKT(pPacket), MEM_ALLOC_FLAG);
-	if (skb)
-	{
-		skb->dev = get_netdev_from_bssid(pAd, FromWhichBSSID);
-		pRetPacket = OSPKT_TO_RTPKT(skb);
-	}
-
-	return pRetPacket;
-
-}
-
-PNDIS_PACKET duplicate_pkt(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pHeader802_3,
-    IN  UINT            HdrLen,
-	IN	PUCHAR			pData,
-	IN	ULONG			DataSize,
-	IN	UCHAR			FromWhichBSSID)
-{
-	struct sk_buff	*skb;
-	PNDIS_PACKET	pPacket = NULL;
-
-
-	if ((skb = __dev_alloc_skb(HdrLen + DataSize + 2, MEM_ALLOC_FLAG)) != NULL)
-	{
-		skb_reserve(skb, 2);
-		NdisMoveMemory(skb->tail, pHeader802_3, HdrLen);
-		skb_put(skb, HdrLen);
-		NdisMoveMemory(skb->tail, pData, DataSize);
-		skb_put(skb, DataSize);
-		skb->dev = get_netdev_from_bssid(pAd, FromWhichBSSID);
-		pPacket = OSPKT_TO_RTPKT(skb);
-	}
-
-	return pPacket;
-}
-
-
-#define TKIP_TX_MIC_SIZE		8
-PNDIS_PACKET duplicate_pkt_with_TKIP_MIC(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket)
-{
-	struct sk_buff	*skb, *newskb;
-
-
-	skb = RTPKT_TO_OSPKT(pPacket);
-	if (skb_tailroom(skb) < TKIP_TX_MIC_SIZE)
-	{
-		// alloc a new skb and copy the packet
-		newskb = skb_copy_expand(skb, skb_headroom(skb), TKIP_TX_MIC_SIZE, GFP_ATOMIC);
-		dev_kfree_skb_any(skb);
-		if (newskb == NULL)
-		{
-			DBGPRINT(RT_DEBUG_ERROR, ("Extend Tx.MIC for packet failed!, dropping packet!\n"));
-			return NULL;
-		}
-		skb = newskb;
-	}
-
-	return OSPKT_TO_RTPKT(skb);
-}
-
-
-
-
-PNDIS_PACKET ClonePacket(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket,
-	IN	PUCHAR			pData,
-	IN	ULONG			DataSize)
-{
-	struct sk_buff	*pRxPkt;
-	struct sk_buff	*pClonedPkt;
-
-	ASSERT(pPacket);
-	pRxPkt = RTPKT_TO_OSPKT(pPacket);
-
-	// clone the packet
-	pClonedPkt = skb_clone(pRxPkt, MEM_ALLOC_FLAG);
-
-	if (pClonedPkt)
-	{
-    	// set the correct dataptr and data len
-    	pClonedPkt->dev = pRxPkt->dev;
-    	pClonedPkt->data = pData;
-    	pClonedPkt->len = DataSize;
-    	pClonedPkt->tail = pClonedPkt->data + pClonedPkt->len;
-		ASSERT(DataSize < 1530);
-	}
-	return pClonedPkt;
-}
-
-//
-// change OS packet DataPtr and DataLen
-//
-void  update_os_packet_info(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN  UCHAR			FromWhichBSSID)
-{
-	struct sk_buff	*pOSPkt;
-
-	ASSERT(pRxBlk->pRxPacket);
-	pOSPkt = RTPKT_TO_OSPKT(pRxBlk->pRxPacket);
-
-	pOSPkt->dev = get_netdev_from_bssid(pAd, FromWhichBSSID);
-	pOSPkt->data = pRxBlk->pData;
-	pOSPkt->len = pRxBlk->DataSize;
-	pOSPkt->tail = pOSPkt->data + pOSPkt->len;
-}
-
-
-void wlan_802_11_to_802_3_packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN	PUCHAR			pHeader802_3,
-	IN  UCHAR			FromWhichBSSID)
-{
-	struct sk_buff	*pOSPkt;
-
-	ASSERT(pRxBlk->pRxPacket);
-	ASSERT(pHeader802_3);
-
-	pOSPkt = RTPKT_TO_OSPKT(pRxBlk->pRxPacket);
-
-	pOSPkt->dev = get_netdev_from_bssid(pAd, FromWhichBSSID);
-	pOSPkt->data = pRxBlk->pData;
-	pOSPkt->len = pRxBlk->DataSize;
-	pOSPkt->tail = pOSPkt->data + pOSPkt->len;
-
-	//
-	// copy 802.3 header
-	//
-	//
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		NdisMoveMemory(skb_push(pOSPkt, LENGTH_802_3), pHeader802_3, LENGTH_802_3);
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-
-
-void announce_802_3_packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket)
-{
-
-	struct sk_buff	*pRxPkt;
-
-	ASSERT(pPacket);
-
-	pRxPkt = RTPKT_TO_OSPKT(pPacket);
-
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-
-    /* Push up the protocol stack */
-#ifdef IKANOS_VX_1X0
-	IKANOS_DataFrameRx(pAd, pRxPkt->dev, pRxPkt, pRxPkt->len);
-#else
-	pRxPkt->protocol = eth_type_trans(pRxPkt, pRxPkt->dev);
-
-//#ifdef CONFIG_5VT_ENHANCE
-//	*(int*)(pRxPkt->cb) = BRIDGE_TAG;
-//#endif
-	netif_rx(pRxPkt);
-#endif // IKANOS_VX_1X0 //
-}
-
-
-PRTMP_SCATTER_GATHER_LIST
-rt_get_sg_list_from_packet(PNDIS_PACKET pPacket, RTMP_SCATTER_GATHER_LIST *sg)
-{
-	sg->NumberOfElements = 1;
-	sg->Elements[0].Address =  GET_OS_PKT_DATAPTR(pPacket);
-	sg->Elements[0].Length = GET_OS_PKT_LEN(pPacket);
-	return (sg);
-}
-
-void hex_dump(char *str, unsigned char *pSrcBufVA, unsigned int SrcBufLen)
-{
-	unsigned char *pt;
-	int x;
-
-	if (RTDebugLevel < RT_DEBUG_TRACE)
-		return;
-
-	pt = pSrcBufVA;
-	printk("%s: %p, len = %d\n",str,  pSrcBufVA, SrcBufLen);
-	for (x=0; x<SrcBufLen; x++)
-	{
-		if (x % 16 == 0)
-			printk("0x%04x : ", x);
-		printk("%02x ", ((unsigned char)pt[x]));
-		if (x%16 == 15) printk("\n");
-	}
-	printk("\n");
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Send log message through wireless event
-
-		Support standard iw_event with IWEVCUSTOM. It is used below.
-
-		iwreq_data.data.flags is used to store event_flag that is defined by user.
-		iwreq_data.data.length is the length of the event log.
-
-		The format of the event log is composed of the entry's MAC address and
-		the desired log message (refer to pWirelessEventText).
-
-			ex: 11:22:33:44:55:66 has associated successfully
-
-		p.s. The requirement of Wireless Extension is v15 or newer.
-
-	========================================================================
-*/
-VOID RTMPSendWirelessEvent(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT			Event_flag,
-	IN	PUCHAR 			pAddr,
-	IN	UCHAR			BssIdx,
-	IN	CHAR			Rssi)
-{
-#if WIRELESS_EXT >= 15
-
-	union 	iwreq_data      wrqu;
-	PUCHAR 	pBuf = NULL, pBufPtr = NULL;
-	USHORT	event, type, BufLen;
-	UCHAR	event_table_len = 0;
-
-	type = Event_flag & 0xFF00;
-	event = Event_flag & 0x00FF;
-
-	switch (type)
-	{
-		case IW_SYS_EVENT_FLAG_START:
-			event_table_len = IW_SYS_EVENT_TYPE_NUM;
-			break;
-
-		case IW_SPOOF_EVENT_FLAG_START:
-			event_table_len = IW_SPOOF_EVENT_TYPE_NUM;
-			break;
-
-		case IW_FLOOD_EVENT_FLAG_START:
-			event_table_len = IW_FLOOD_EVENT_TYPE_NUM;
-			break;
-	}
-
-	if (event_table_len == 0)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("%s : The type(%0x02x) is not valid.\n", __FUNCTION__, type));
-		return;
-	}
-
-	if (event >= event_table_len)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("%s : The event(%0x02x) is not valid.\n", __FUNCTION__, event));
-		return;
-	}
-
-	//Allocate memory and copy the msg.
-	if((pBuf = kmalloc(IW_CUSTOM_MAX_LEN, GFP_ATOMIC)) != NULL)
-	{
-		//Prepare the payload
-		memset(pBuf, 0, IW_CUSTOM_MAX_LEN);
-
-		pBufPtr = pBuf;
-
-		if (pAddr)
-			pBufPtr += sprintf(pBufPtr, "(RT2860) STA(%02x:%02x:%02x:%02x:%02x:%02x) ", PRINT_MAC(pAddr));
-		else if (BssIdx < MAX_MBSSID_NUM)
-			pBufPtr += sprintf(pBufPtr, "(RT2860) BSS(ra%d) ", BssIdx);
-		else
-			pBufPtr += sprintf(pBufPtr, "(RT2860) ");
-
-		if (type == IW_SYS_EVENT_FLAG_START)
-			pBufPtr += sprintf(pBufPtr, "%s", pWirelessSysEventText[event]);
-		else if (type == IW_SPOOF_EVENT_FLAG_START)
-			pBufPtr += sprintf(pBufPtr, "%s (RSSI=%d)", pWirelessSpoofEventText[event], Rssi);
-		else if (type == IW_FLOOD_EVENT_FLAG_START)
-			pBufPtr += sprintf(pBufPtr, "%s", pWirelessFloodEventText[event]);
-		else
-			pBufPtr += sprintf(pBufPtr, "%s", "unknown event");
-
-		pBufPtr[pBufPtr - pBuf] = '\0';
-		BufLen = pBufPtr - pBuf;
-
-		memset(&wrqu, 0, sizeof(wrqu));
-	    wrqu.data.flags = Event_flag;
-		wrqu.data.length = BufLen;
-
-		//send wireless event
-	    wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, pBuf);
-
-		//DBGPRINT(RT_DEBUG_TRACE, ("%s : %s\n", __FUNCTION__, pBuf));
-
-		kfree(pBuf);
-	}
-	else
-		DBGPRINT(RT_DEBUG_ERROR, ("%s : Can't allocate memory for wireless event.\n", __FUNCTION__));
-#else
-	DBGPRINT(RT_DEBUG_ERROR, ("%s : The Wireless Extension MUST be v15 or newer.\n", __FUNCTION__));
-#endif  /* WIRELESS_EXT >= 15 */
-}
-
-
-#ifdef CONFIG_STA_SUPPORT
-void send_monitor_packets(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk)
-{
-    struct sk_buff	*pOSPkt;
-    wlan_ng_prism2_header *ph;
-    int rate_index = 0;
-    USHORT header_len = 0;
-    UCHAR temp_header[40] = {0};
-
-    u_int32_t ralinkrate[256] = {2,4,11,22, 12,18,24,36,48,72,96,  108,   109, 110, 111, 112, 13, 26, 39, 52,78,104, 117, 130, 26, 52, 78,104, 156, 208, 234, 260, 27, 54,81,108,162, 216, 243, 270, // Last 38
-	54, 108, 162, 216, 324, 432, 486, 540,  14, 29, 43, 57, 87, 115, 130, 144, 29, 59,87,115, 173, 230,260, 288, 30, 60,90,120,180,240,270,300,60,120,180,240,360,480,540,600, 0,1,2,3,4,5,6,7,8,9,10,
-	11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80};
-
-
-    ASSERT(pRxBlk->pRxPacket);
-    if (pRxBlk->DataSize < 10)
-    {
-        DBGPRINT(RT_DEBUG_ERROR, ("%s : Size is too small! (%d)\n", __FUNCTION__, pRxBlk->DataSize));
-		goto err_free_sk_buff;
-    }
-
-    if (pRxBlk->DataSize + sizeof(wlan_ng_prism2_header) > RX_BUFFER_AGGRESIZE)
-    {
-        DBGPRINT(RT_DEBUG_ERROR, ("%s : Size is too large! (%d)\n", __FUNCTION__, pRxBlk->DataSize + sizeof(wlan_ng_prism2_header)));
-		goto err_free_sk_buff;
-    }
-
-    pOSPkt = RTPKT_TO_OSPKT(pRxBlk->pRxPacket);
-	pOSPkt->dev = get_netdev_from_bssid(pAd, BSS0);
-    if (pRxBlk->pHeader->FC.Type == BTYPE_DATA)
-    {
-        pRxBlk->DataSize -= LENGTH_802_11;
-        if ((pRxBlk->pHeader->FC.ToDs == 1) &&
-            (pRxBlk->pHeader->FC.FrDs == 1))
-            header_len = LENGTH_802_11_WITH_ADDR4;
-        else
-            header_len = LENGTH_802_11;
-
-        // QOS
-    	if (pRxBlk->pHeader->FC.SubType & 0x08)
-    	{
-    	    header_len += 2;
-    		// Data skip QOS contorl field
-    		pRxBlk->DataSize -=2;
-    	}
-
-    	// Order bit: A-Ralink or HTC+
-    	if (pRxBlk->pHeader->FC.Order)
-    	{
-    	    header_len += 4;
-			// Data skip HTC contorl field
-			pRxBlk->DataSize -= 4;
-    	}
-
-        // Copy Header
-        if (header_len <= 40)
-            NdisMoveMemory(temp_header, pRxBlk->pData, header_len);
-
-        // skip HW padding
-    	if (pRxBlk->RxD.L2PAD)
-    	    pRxBlk->pData += (header_len + 2);
-        else
-            pRxBlk->pData += header_len;
-    } //end if
-
-
-	if (pRxBlk->DataSize < pOSPkt->len) {
-        skb_trim(pOSPkt,pRxBlk->DataSize);
-    } else {
-        skb_put(pOSPkt,(pRxBlk->DataSize - pOSPkt->len));
-    } //end if
-
-    if ((pRxBlk->pData - pOSPkt->data) > 0) {
-	    skb_put(pOSPkt,(pRxBlk->pData - pOSPkt->data));
-	    skb_pull(pOSPkt,(pRxBlk->pData - pOSPkt->data));
-    } //end if
-
-    if (skb_headroom(pOSPkt) < (sizeof(wlan_ng_prism2_header)+ header_len)) {
-        if (pskb_expand_head(pOSPkt, (sizeof(wlan_ng_prism2_header) + header_len), 0, GFP_ATOMIC)) {
-	        DBGPRINT(RT_DEBUG_ERROR, ("%s : Reallocate header size of sk_buff fail!\n", __FUNCTION__));
-			goto err_free_sk_buff;
-	    } //end if
-    } //end if
-
-    if (header_len > 0)
-        NdisMoveMemory(skb_push(pOSPkt, header_len), temp_header, header_len);
-
-    ph = (wlan_ng_prism2_header *) skb_push(pOSPkt, sizeof(wlan_ng_prism2_header));
-	NdisZeroMemory(ph, sizeof(wlan_ng_prism2_header));
-
-    ph->msgcode		    = DIDmsg_lnxind_wlansniffrm;
-	ph->msglen		    = sizeof(wlan_ng_prism2_header);
-	strcpy(ph->devname, pAd->net_dev->name);
-
-    ph->hosttime.did = DIDmsg_lnxind_wlansniffrm_hosttime;
-	ph->hosttime.status = 0;
-	ph->hosttime.len = 4;
-	ph->hosttime.data = jiffies;
-
-	ph->mactime.did = DIDmsg_lnxind_wlansniffrm_mactime;
-	ph->mactime.status = 0;
-	ph->mactime.len = 0;
-	ph->mactime.data = 0;
-
-    ph->istx.did = DIDmsg_lnxind_wlansniffrm_istx;
-	ph->istx.status = 0;
-	ph->istx.len = 0;
-	ph->istx.data = 0;
-
-    ph->channel.did = DIDmsg_lnxind_wlansniffrm_channel;
-	ph->channel.status = 0;
-	ph->channel.len = 4;
-
-    ph->channel.data = (u_int32_t)pAd->CommonCfg.Channel;
-
-    ph->rssi.did = DIDmsg_lnxind_wlansniffrm_rssi;
-	ph->rssi.status = 0;
-	ph->rssi.len = 4;
-    ph->rssi.data = (u_int32_t)RTMPMaxRssi(pAd, ConvertToRssi(pAd, pRxBlk->pRxWI->RSSI0, RSSI_0), ConvertToRssi(pAd, pRxBlk->pRxWI->RSSI1, RSSI_1), ConvertToRssi(pAd, pRxBlk->pRxWI->RSSI2, RSSI_2));;
-
-	ph->signal.did = DIDmsg_lnxind_wlansniffrm_signal;
-	ph->signal.status = 0;
-	ph->signal.len = 4;
-	ph->signal.data = 0; //rssi + noise;
-
-	ph->noise.did = DIDmsg_lnxind_wlansniffrm_noise;
-	ph->noise.status = 0;
-	ph->noise.len = 4;
-	ph->noise.data = 0;
-
-#ifdef DOT11_N_SUPPORT
-    if (pRxBlk->pRxWI->PHYMODE >= MODE_HTMIX)
-    {
-    	rate_index = 16 + ((UCHAR)pRxBlk->pRxWI->BW *16) + ((UCHAR)pRxBlk->pRxWI->ShortGI *32) + ((UCHAR)pRxBlk->pRxWI->MCS);
-    }
-    else
-#endif // DOT11_N_SUPPORT //
-	if (pRxBlk->pRxWI->PHYMODE == MODE_OFDM)
-    	rate_index = (UCHAR)(pRxBlk->pRxWI->MCS) + 4;
-    else
-    	rate_index = (UCHAR)(pRxBlk->pRxWI->MCS);
-    if (rate_index < 0)
-        rate_index = 0;
-    if (rate_index > 255)
-        rate_index = 255;
-
-	ph->rate.did = DIDmsg_lnxind_wlansniffrm_rate;
-	ph->rate.status = 0;
-	ph->rate.len = 4;
-    ph->rate.data = ralinkrate[rate_index];
-
-	ph->frmlen.did = DIDmsg_lnxind_wlansniffrm_frmlen;
-    ph->frmlen.status = 0;
-	ph->frmlen.len = 4;
-	ph->frmlen.data	= (u_int32_t)pRxBlk->DataSize;
-
-
-    pOSPkt->pkt_type = PACKET_OTHERHOST;
-    pOSPkt->protocol = eth_type_trans(pOSPkt, pOSPkt->dev);
-    pOSPkt->ip_summed = CHECKSUM_NONE;
-    netif_rx(pOSPkt);
-
-    return;
-
-err_free_sk_buff:
-	RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
-	return;
-
-}
-#endif // CONFIG_STA_SUPPORT //
-
-
-void rtmp_os_thread_init(PUCHAR pThreadName, PVOID pNotify)
-{
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-	daemonize(pThreadName /*"%s",pAd->net_dev->name*/);
-
-	allow_signal(SIGTERM);
-	allow_signal(SIGKILL);
-	current->flags |= PF_NOFREEZE;
-#else
-	unsigned long flags;
-
-	daemonize();
-	reparent_to_init();
-	strcpy(current->comm, pThreadName);
-
-	siginitsetinv(&current->blocked, sigmask(SIGTERM) | sigmask(SIGKILL));
-
-	/* Allow interception of SIGKILL only
-	 * Don't allow other signals to interrupt the transmission */
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,4,22)
-	spin_lock_irqsave(&current->sigmask_lock, flags);
-	flush_signals(current);
-	recalc_sigpending(current);
-	spin_unlock_irqrestore(&current->sigmask_lock, flags);
-#endif
-#endif
-
-    /* signal that we've started the thread */
-	complete(pNotify);
-
-}
-
-void RTMP_IndicateMediaState(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	if (pAd->CommonCfg.bWirelessEvent)
-	{
-		if (pAd->IndicateMediaState == NdisMediaStateConnected)
-		{
-			RTMPSendWirelessEvent(pAd, IW_STA_LINKUP_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-		}
-		else
-		{
-			RTMPSendWirelessEvent(pAd, IW_STA_LINKDOWN_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-		}
-	}
-}
-
+#include "../rt2870/rt_linux.c"
diff --git a/drivers/staging/rt3070/rt_linux.h b/drivers/staging/rt3070/rt_linux.h
index 0540d02da79..9f7efee3d60 100644
--- a/drivers/staging/rt3070/rt_linux.h
+++ b/drivers/staging/rt3070/rt_linux.h
@@ -1,887 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-/***********************************************************************/
-/*                                                                     */
-/*   Program:    rt_linux.c                                            */
-/*   Created:    4/21/2006 1:17:38 PM                                  */
-/*   Author:     Wu Xi-Kun                                             */
-/*   Comments:   `description`                                         */
-/*                                                                     */
-/*---------------------------------------------------------------------*/
-/*                                                                     */
-/* History:                                                            */
-/*    Revision 1.1 4/21/2006 1:17:38 PM  xsikun                        */
-/*    Initial revision                                                 */
-/*                                                                     */
-/***********************************************************************/
-
-#include "rtmp_type.h"
-#include <linux/module.h>
-#include <linux/version.h>
-#include <linux/kernel.h>
-
-#include <linux/spinlock.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/ethtool.h>
-#include <linux/wireless.h>
-#include <linux/proc_fs.h>
-#include <linux/delay.h>
-#include <linux/if_arp.h>
-#include <linux/ctype.h>
-#include <linux/vmalloc.h>
-
-
-#include <linux/wireless.h>
-#include <net/iw_handler.h>
-
-// load firmware
-#define __KERNEL_SYSCALLS__
-#include <linux/unistd.h>
-#include <asm/uaccess.h>
-
-
-#define MEM_ALLOC_FLAG      (GFP_ATOMIC) //(GFP_DMA | GFP_ATOMIC)
-
-#ifndef IFNAMSIZ
-#define IFNAMSIZ 16
-#endif
-
-//#define CONFIG_CKIP_SUPPORT
-
-#undef __inline
-#define __inline	   static inline
-
-typedef int (*HARD_START_XMIT_FUNC)(struct sk_buff *skb, struct net_device *net_dev);
-
-// add by kathy
-
-#ifdef CONFIG_STA_SUPPORT
-
-#ifdef RT2870
-#define STA_PROFILE_PATH			"/etc/Wireless/RT2870STA/RT2870STA.dat"
-#define STA_RT2870_IMAGE_FILE_NAME  "/etc/Wireless/RT2870STA/rt2870.bin"
-#define STA_NIC_DEVICE_NAME			"RT2870STA"
-#define STA_DRIVER_VERSION			"2.0.1.0"
-#ifdef MULTIPLE_CARD_SUPPORT
-#define CARD_INFO_PATH			"/etc/Wireless/RT2870STA/RT2870STACard.dat"
-#endif // MULTIPLE_CARD_SUPPORT //
-#endif // RT2870 //
-
-#endif // CONFIG_STA_SUPPORT //
-
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-
-#define RTMP_TIME_AFTER(a,b)		\
-	(typecheck(unsigned long, (unsigned long)a) && \
-	 typecheck(unsigned long, (unsigned long)b) && \
-	 ((long)(b) - (long)(a) < 0))
-
-#define RTMP_TIME_AFTER_EQ(a,b)	\
-	(typecheck(unsigned long, (unsigned long)a) && \
-	 typecheck(unsigned long, (unsigned long)b) && \
-	 ((long)(a) - (long)(b) >= 0))
-#define RTMP_TIME_BEFORE(a,b)	RTMP_TIME_AFTER_EQ(b,a)
-#else
-#define RTMP_TIME_AFTER(a,b) time_after(a, b)
-#endif
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-#define RT_MOD_INC_USE_COUNT() \
-	if (!try_module_get(THIS_MODULE)) \
-	{ \
-		DBGPRINT(RT_DEBUG_ERROR, ("%s: cannot reserve module\n", __FUNCTION__)); \
-		return -1; \
-	}
-
-#define RT_MOD_DEC_USE_COUNT() module_put(THIS_MODULE);
-#else
-#define RT_MOD_INC_USE_COUNT()	MOD_INC_USE_COUNT;
-#define RT_MOD_DEC_USE_COUNT() MOD_DEC_USE_COUNT;
-#endif
-
-#define OS_HZ			HZ
-
-#define ETH_LENGTH_OF_ADDRESS	6
-
-#define IN
-#define OUT
-
-#define NDIS_STATUS                             INT
-#define NDIS_STATUS_SUCCESS                     0x00
-#define NDIS_STATUS_FAILURE                     0x01
-#define NDIS_STATUS_INVALID_DATA				0x02
-#define NDIS_STATUS_RESOURCES                   0x03
-
-#define MIN_NET_DEVICE_FOR_AID			0x00		//0x00~0x3f
-#define MIN_NET_DEVICE_FOR_MBSSID		0x00		//0x00,0x10,0x20,0x30
-#define MIN_NET_DEVICE_FOR_WDS			0x10		//0x40,0x50,0x60,0x70
-#define MIN_NET_DEVICE_FOR_APCLI		0x20
-#define MIN_NET_DEVICE_FOR_MESH			0x30
-#ifdef CONFIG_STA_SUPPORT
-#define MIN_NET_DEVICE_FOR_DLS			0x40
-#endif // CONFIG_STA_SUPPORT //
-
-
-#ifdef CONFIG_STA_SUPPORT
-#define NDIS_PACKET_TYPE_DIRECTED		0
-#define NDIS_PACKET_TYPE_MULTICAST		1
-#define NDIS_PACKET_TYPE_BROADCAST		2
-#define NDIS_PACKET_TYPE_ALL_MULTICAST	3
-#endif // CONFIG_STA_SUPPORT //
-
-struct os_lock  {
-	spinlock_t		lock;
-	unsigned long  	flags;
-};
-
-
-struct os_cookie {
-
-#ifdef RT2870
-	struct usb_device		*pUsb_Dev;
-
-	struct pid *		MLMEThr_pid;
-	struct pid *		RTUSBCmdThr_pid;
-	struct pid *		TimerQThr_pid;
-#endif // RT2870 //
-
-	struct tasklet_struct 	rx_done_task;
-	struct tasklet_struct 	mgmt_dma_done_task;
-	struct tasklet_struct 	ac0_dma_done_task;
-	struct tasklet_struct 	ac1_dma_done_task;
-	struct tasklet_struct 	ac2_dma_done_task;
-	struct tasklet_struct 	ac3_dma_done_task;
-	struct tasklet_struct 	hcca_dma_done_task;
-	struct tasklet_struct	tbtt_task;
-#ifdef RT2870
-	struct tasklet_struct	null_frame_complete_task;
-	struct tasklet_struct	rts_frame_complete_task;
-	struct tasklet_struct	pspoll_frame_complete_task;
-#endif // RT2870 //
-
-
-	unsigned long			apd_pid; //802.1x daemon pid
-	INT						ioctl_if_type;
-	INT 					ioctl_if;
-};
-
-typedef struct _VIRTUAL_ADAPTER
-{
-	struct net_device		*RtmpDev;
-	struct net_device		*VirtualDev;
-} VIRTUAL_ADAPTER, PVIRTUAL_ADAPTER;
-
-#undef  ASSERT
-#define ASSERT(x)                                                               \
-{                                                                               \
-    if (!(x))                                                                   \
-    {                                                                           \
-        printk(KERN_WARNING __FILE__ ":%d assert " #x "failed\n", __LINE__);    \
-    }                                                                           \
-}
-
-typedef struct os_cookie	* POS_COOKIE;
-typedef struct pci_dev 		* PPCI_DEV;
-typedef struct net_device	* PNET_DEV;
-typedef void				* PNDIS_PACKET;
-typedef char				NDIS_PACKET;
-typedef PNDIS_PACKET		* PPNDIS_PACKET;
-typedef	dma_addr_t			NDIS_PHYSICAL_ADDRESS;
-typedef	dma_addr_t			* PNDIS_PHYSICAL_ADDRESS;
-//typedef struct timer_list	RALINK_TIMER_STRUCT;
-//typedef struct timer_list	* PRALINK_TIMER_STRUCT;
-//typedef struct os_lock		NDIS_SPIN_LOCK;
-typedef spinlock_t			NDIS_SPIN_LOCK;
-typedef struct timer_list	NDIS_MINIPORT_TIMER;
-typedef void				* NDIS_HANDLE;
-typedef char 				* PNDIS_BUFFER;
-
-
-
-void hex_dump(char *str, unsigned char *pSrcBufVA, unsigned int SrcBufLen);
-
-dma_addr_t linux_pci_map_single(void *handle, void *ptr, size_t size, int sd_idx, int direction);
-void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size, int direction);
-
-
-////////////////////////////////////////
-// MOVE TO rtmp.h ?
-/////////////////////////////////////////
-#define PKTSRC_NDIS             0x7f
-#define PKTSRC_DRIVER           0x0f
-#define PRINT_MAC(addr)	\
-	addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]
-
-
-#define RT2860_PCI_DEVICE_ID		0x0601
-
-#ifdef RT2870
-#define PCI_MAP_SINGLE(_handle, _ptr, _size, _dir) (ULONG)0
-
-#define PCI_UNMAP_SINGLE(_handle, _ptr, _size, _dir)
-#endif // RT2870 //
-
-
-#define BEACON_FRAME_DMA_CACHE_WBACK(_ptr, _size)	\
-	dma_cache_wback(_ptr, _size)
-
-
-//////////////////////////////////////////
-//
-//////////////////////////////////////////
-
-
-#define NdisMIndicateStatus(_w, _x, _y, _z)
-
-
-typedef struct timer_list	RTMP_OS_TIMER;
-
-#ifdef RT2870
-/* ----------------- Timer Related MARCO ---------------*/
-// In RT2870, we have a lot of timer functions and will read/write register, it's
-//	not allowed in Linux USB sub-system to do it ( because of sleep issue when submit
-//  to ctrl pipe). So we need a wrapper function to take care it.
-
-typedef VOID (*RT2870_TIMER_HANDLE)(
-	IN  PVOID   SystemSpecific1,
-	IN  PVOID   FunctionContext,
-	IN  PVOID   SystemSpecific2,
-	IN  PVOID   SystemSpecific3);
-#endif // RT2870 //
-
-
-typedef struct  _RALINK_TIMER_STRUCT    {
-    RTMP_OS_TIMER		TimerObj;       // Ndis Timer object
-	BOOLEAN				Valid;			// Set to True when call RTMPInitTimer
-    BOOLEAN             State;          // True if timer cancelled
-    BOOLEAN	      		PeriodicType;	// True if timer is periodic timer
-    BOOLEAN             Repeat;         // True if periodic timer
-    ULONG               TimerValue;     // Timer value in milliseconds
-	ULONG				cookie;			// os specific object
-#ifdef RT2870
-	RT2870_TIMER_HANDLE	handle;
-	void				*pAd;
-#endif // RT2870 //
-}   RALINK_TIMER_STRUCT, *PRALINK_TIMER_STRUCT;
-
-
-#ifdef RT2870
-
-typedef enum _RT2870_KERNEL_THREAD_STATUS_
-{
-	RT2870_THREAD_UNKNOWN = 0,
-	RT2870_THREAD_INITED = 1,
-	RT2870_THREAD_RUNNING = 2,
-	RT2870_THREAD_STOPED = 4,
-}RT2870_KERNEL_THREAD_STATUS;
-
-#define RT2870_THREAD_CAN_DO_INSERT		(RT2870_THREAD_INITED |RT2870_THREAD_RUNNING)
-
-typedef struct _RT2870_TIMER_ENTRY_
-{
-	RALINK_TIMER_STRUCT 			*pRaTimer;
-	struct _RT2870_TIMER_ENTRY_ 	*pNext;
-}RT2870_TIMER_ENTRY;
-
-
-#define TIMER_QUEUE_SIZE_MAX	128
-typedef struct _RT2870_TIMER_QUEUE_
-{
-	unsigned int		status;
-	//wait_queue_head_t 	timerWaitQ;
-	//atomic_t			count;
-	UCHAR				*pTimerQPoll;
-	RT2870_TIMER_ENTRY	*pQPollFreeList;
-	RT2870_TIMER_ENTRY 	*pQHead;
-	RT2870_TIMER_ENTRY 	*pQTail;
-}RT2870_TIMER_QUEUE;
-#endif // RT2870 //
-
-
-//#define DBG	1
-
-//
-//  MACRO for debugging information
-//
-
-#ifdef DBG
-extern ULONG    RTDebugLevel;
-
-#define DBGPRINT_RAW(Level, Fmt)    \
-{                                   \
-    if (Level <= RTDebugLevel)      \
-    {                               \
-        printk Fmt;               \
-    }                               \
-}
-
-#define DBGPRINT(Level, Fmt)    DBGPRINT_RAW(Level, Fmt)
-
-
-#define DBGPRINT_ERR(Fmt)           \
-{                                   \
-    printk("ERROR!!! ");          \
-    printk Fmt;                  \
-}
-
-#define DBGPRINT_S(Status, Fmt)		\
-{									\
-	printk Fmt;					\
-}
-
-
-#else
-#define DBGPRINT(Level, Fmt)
-#define DBGPRINT_RAW(Level, Fmt)
-#define DBGPRINT_S(Status, Fmt)
-#define DBGPRINT_ERR(Fmt)
-#endif
-
-
-//
-//  spin_lock enhanced for Nested spin lock
-//
-#define NdisAllocateSpinLock(__lock)      \
-{                                       \
-    spin_lock_init((spinlock_t *)(__lock));               \
-}
-
-#define NdisFreeSpinLock(lock)          \
-{                                       \
-}
-
-
-#define RTMP_SEM_LOCK(__lock)					\
-{												\
-	spin_lock_bh((spinlock_t *)(__lock));				\
-}
-
-#define RTMP_SEM_UNLOCK(__lock)					\
-{												\
-	spin_unlock_bh((spinlock_t *)(__lock));				\
-}
-
-// sample, use semaphore lock to replace IRQ lock, 2007/11/15
-#define RTMP_IRQ_LOCK(__lock, __irqflags)			\
-{													\
-	__irqflags = 0;									\
-	spin_lock_bh((spinlock_t *)(__lock));			\
-	pAd->irq_disabled |= 1; \
-}
-
-#define RTMP_IRQ_UNLOCK(__lock, __irqflag)			\
-{													\
-	pAd->irq_disabled &= 0; \
-	spin_unlock_bh((spinlock_t *)(__lock));			\
-}
-
-#define RTMP_INT_LOCK(__lock, __irqflags)			\
-{													\
-	spin_lock_irqsave((spinlock_t *)__lock, __irqflags);	\
-}
-
-#define RTMP_INT_UNLOCK(__lock, __irqflag)			\
-{													\
-	spin_unlock_irqrestore((spinlock_t *)(__lock), ((unsigned long)__irqflag));	\
-}
-
-#ifdef RT2870
-#define RTMP_IO_READ32(_A, _R, _pV)								\
-	RTUSBReadMACRegister(_A, _R, _pV)
-
-#define RTMP_IO_READ8(_A, _R, _pV)								\
-{																\
-}
-
-#define RTMP_IO_WRITE32(_A, _R, _V)								\
-	RTUSBWriteMACRegister(_A, _R, _V)
-
-
-#define RTMP_IO_WRITE8(_A, _R, _V)								\
-{																\
-	USHORT	_Val = _V;											\
-	RTUSBSingleWrite(_A, _R, _Val);								\
-}
-
-
-#define RTMP_IO_WRITE16(_A, _R, _V)								\
-{																\
-	RTUSBSingleWrite(_A, _R, _V);								\
-}
-#endif // RT2870 //
-
-#ifndef wait_event_interruptible_timeout
-#define __wait_event_interruptible_timeout(wq, condition, ret) \
-do { \
-        wait_queue_t __wait; \
-        init_waitqueue_entry(&__wait, current); \
-        add_wait_queue(&wq, &__wait); \
-        for (;;) { \
-                set_current_state(TASK_INTERRUPTIBLE); \
-                if (condition) \
-                        break; \
-                if (!signal_pending(current)) { \
-                        ret = schedule_timeout(ret); \
-                        if (!ret) \
-                                break; \
-                        continue; \
-                } \
-                ret = -ERESTARTSYS; \
-                break; \
-        } \
-        current->state = TASK_RUNNING; \
-        remove_wait_queue(&wq, &__wait); \
-} while (0)
-
-#define wait_event_interruptible_timeout(wq, condition, timeout) \
-({ \
-        long __ret = timeout; \
-        if (!(condition)) \
-                __wait_event_interruptible_timeout(wq, condition, __ret); \
-        __ret; \
-})
-#endif
-#define ONE_TICK 1
-#define OS_WAIT(_time) \
-{	int _i; \
-	long _loop = ((_time)/(1000/OS_HZ)) > 0 ? ((_time)/(1000/OS_HZ)) : 1;\
-	wait_queue_head_t _wait; \
-	init_waitqueue_head(&_wait); \
-	for (_i=0; _i<(_loop); _i++) \
-		wait_event_interruptible_timeout(_wait, 0, ONE_TICK); }
-
-
-/* Modified by Wu Xi-Kun 4/21/2006 */
-typedef void (*TIMER_FUNCTION)(unsigned long);
-
-#define COPY_MAC_ADDR(Addr1, Addr2)             memcpy((Addr1), (Addr2), MAC_ADDR_LEN)
-
-#define MlmeAllocateMemory(_pAd, _ppVA) os_alloc_mem(_pAd, _ppVA, MGMT_DMA_BUFFER_SIZE)
-#define MlmeFreeMemory(_pAd, _pVA)     os_free_mem(_pAd, _pVA)
-
-
-#ifdef RT2870
-#define BUILD_TIMER_FUNCTION(_func)													\
-void linux_##_func(unsigned long data)												\
-{																					\
-	PRALINK_TIMER_STRUCT	_pTimer = (PRALINK_TIMER_STRUCT)data;					\
-	RT2870_TIMER_ENTRY		*_pQNode;												\
-	RTMP_ADAPTER			*_pAd;													\
-																				\
-	_pTimer->handle = _func;															\
-	_pAd = (RTMP_ADAPTER *)_pTimer->pAd;												\
-	_pQNode = RT2870_TimerQ_Insert(_pAd, _pTimer); 									\
-	if ((_pQNode == NULL) && (_pAd->TimerQ.status & RT2870_THREAD_CAN_DO_INSERT))	\
-		RTMP_OS_Add_Timer(&_pTimer->TimerObj, HZ);               					\
-}
-#endif // RT2870 //
-
-
-#define DECLARE_TIMER_FUNCTION(_func)			\
-void linux_##_func(unsigned long data)
-
-#define GET_TIMER_FUNCTION(_func)				\
-		linux_##_func
-
-DECLARE_TIMER_FUNCTION(MlmePeriodicExec);
-DECLARE_TIMER_FUNCTION(MlmeRssiReportExec);
-DECLARE_TIMER_FUNCTION(AsicRxAntEvalTimeout);
-DECLARE_TIMER_FUNCTION(APSDPeriodicExec);
-DECLARE_TIMER_FUNCTION(AsicRfTuningExec);
-#ifdef RT2870
-DECLARE_TIMER_FUNCTION(BeaconUpdateExec);
-#endif // RT2870 //
-
-
-#ifdef CONFIG_STA_SUPPORT
-DECLARE_TIMER_FUNCTION(BeaconTimeout);
-DECLARE_TIMER_FUNCTION(ScanTimeout);
-DECLARE_TIMER_FUNCTION(AuthTimeout);
-DECLARE_TIMER_FUNCTION(AssocTimeout);
-DECLARE_TIMER_FUNCTION(ReassocTimeout);
-DECLARE_TIMER_FUNCTION(DisassocTimeout);
-DECLARE_TIMER_FUNCTION(LinkDownExec);
-#ifdef LEAP_SUPPORT
-DECLARE_TIMER_FUNCTION(LeapAuthTimeout);
-#endif
-DECLARE_TIMER_FUNCTION(StaQuickResponeForRateUpExec);
-DECLARE_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc);
-DECLARE_TIMER_FUNCTION(PsPollWakeExec);
-DECLARE_TIMER_FUNCTION(RadioOnExec);
-
-#ifdef QOS_DLS_SUPPORT
-DECLARE_TIMER_FUNCTION(DlsTimeoutAction);
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
-#undef AP_WSC_INCLUDED
-#undef STA_WSC_INCLUDED
-#undef WSC_INCLUDED
-
-
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-
-#if defined(AP_WSC_INCLUDED) || defined(STA_WSC_INCLUDED)
-#define WSC_INCLUDED
-#endif
-
-
-
-void RTMP_GetCurrentSystemTime(LARGE_INTEGER *time);
-
-
-/*
- * packet helper
- * 	- convert internal rt packet to os packet or
- *             os packet to rt packet
- */
-#define RTPKT_TO_OSPKT(_p)		((struct sk_buff *)(_p))
-#define OSPKT_TO_RTPKT(_p)		((PNDIS_PACKET)(_p))
-
-#define GET_OS_PKT_DATAPTR(_pkt) \
-		(RTPKT_TO_OSPKT(_pkt)->data)
-
-#define GET_OS_PKT_LEN(_pkt) \
-		(RTPKT_TO_OSPKT(_pkt)->len)
-
-#define GET_OS_PKT_DATATAIL(_pkt) \
-		(RTPKT_TO_OSPKT(_pkt)->tail)
-
-#define GET_OS_PKT_HEAD(_pkt) \
-		(RTPKT_TO_OSPKT(_pkt)->head)
-
-#define GET_OS_PKT_END(_pkt) \
-		(RTPKT_TO_OSPKT(_pkt)->end)
-
-#define GET_OS_PKT_NETDEV(_pkt) \
-		(RTPKT_TO_OSPKT(_pkt)->dev)
-
-#define GET_OS_PKT_TYPE(_pkt) \
-		(RTPKT_TO_OSPKT(_pkt))
-
-#define GET_OS_PKT_NEXT(_pkt) \
-		(RTPKT_TO_OSPKT(_pkt)->next)
-
-
-#define OS_NTOHS(_Val) \
-		(ntohs(_Val))
-#define OS_HTONS(_Val) \
-		(htons(_Val))
-#define OS_NTOHL(_Val) \
-		(ntohl(_Val))
-#define OS_HTONL(_Val) \
-		(htonl(_Val))
-
-/* statistics counter */
-#define STATS_INC_RX_PACKETS(_pAd, _dev)
-#define STATS_INC_TX_PACKETS(_pAd, _dev)
-
-#define STATS_INC_RX_BYTESS(_pAd, _dev, len)
-#define STATS_INC_TX_BYTESS(_pAd, _dev, len)
-
-#define STATS_INC_RX_ERRORS(_pAd, _dev)
-#define STATS_INC_TX_ERRORS(_pAd, _dev)
-
-#define STATS_INC_RX_DROPPED(_pAd, _dev)
-#define STATS_INC_TX_DROPPED(_pAd, _dev)
-
-
-#define CB_OFF  10
-
-
-//   check DDK NDIS_PACKET data structure and find out only MiniportReservedEx[0..7] can be used by our driver without
-//   ambiguity. Fields after pPacket->MiniportReservedEx[8] may be used by other wrapper layer thus crashes the driver
-//
-//#define RTMP_GET_PACKET_MR(_p)			(RTPKT_TO_OSPKT(_p))
-
-// User Priority
-#define RTMP_SET_PACKET_UP(_p, _prio)			(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+0] = _prio)
-#define RTMP_GET_PACKET_UP(_p)					(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+0])
-
-// Fragment #
-#define RTMP_SET_PACKET_FRAGMENTS(_p, _num)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+1] = _num)
-#define RTMP_GET_PACKET_FRAGMENTS(_p)			(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+1])
-
-// 0x0 ~0x7f: TX to AP's own BSS which has the specified AID. if AID>127, set bit 7 in RTMP_SET_PACKET_EMACTAB too.
-//(this value also as MAC(on-chip WCID) table index)
-// 0x80~0xff: TX to a WDS link. b0~6: WDS index
-#define RTMP_SET_PACKET_WCID(_p, _wdsidx)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+2] = _wdsidx)
-#define RTMP_GET_PACKET_WCID(_p)          		((UCHAR)(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+2]))
-
-// 0xff: PKTSRC_NDIS, others: local TX buffer index. This value affects how to a packet
-#define RTMP_SET_PACKET_SOURCE(_p, _pktsrc)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+3] = _pktsrc)
-#define RTMP_GET_PACKET_SOURCE(_p)       		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+3])
-
-// RTS/CTS-to-self protection method
-#define RTMP_SET_PACKET_RTS(_p, _num)      		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+4] = _num)
-#define RTMP_GET_PACKET_RTS(_p)          		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+4])
-// see RTMP_S(G)ET_PACKET_EMACTAB
-
-// TX rate index
-#define RTMP_SET_PACKET_TXRATE(_p, _rate)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+5] = _rate)
-#define RTMP_GET_PACKET_TXRATE(_p)		  		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+5])
-
-// From which Interface
-#define RTMP_SET_PACKET_IF(_p, _ifdx)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+6] = _ifdx)
-#define RTMP_GET_PACKET_IF(_p)		  		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+6])
-#define RTMP_SET_PACKET_NET_DEVICE_MBSSID(_p, _bss)		RTMP_SET_PACKET_IF((_p), (_bss))
-#define RTMP_SET_PACKET_NET_DEVICE_WDS(_p, _bss)		RTMP_SET_PACKET_IF((_p), ((_bss) + MIN_NET_DEVICE_FOR_WDS))
-#define RTMP_SET_PACKET_NET_DEVICE_APCLI(_p, _idx)   	RTMP_SET_PACKET_IF((_p), ((_idx) + MIN_NET_DEVICE_FOR_APCLI))
-#define RTMP_SET_PACKET_NET_DEVICE_MESH(_p, _idx)   	RTMP_SET_PACKET_IF((_p), ((_idx) + MIN_NET_DEVICE_FOR_MESH))
-#define RTMP_GET_PACKET_NET_DEVICE_MBSSID(_p)			RTMP_GET_PACKET_IF((_p))
-#define RTMP_GET_PACKET_NET_DEVICE(_p)					RTMP_GET_PACKET_IF((_p))
-
-#define RTMP_SET_PACKET_MOREDATA(_p, _morebit)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+7] = _morebit)
-#define RTMP_GET_PACKET_MOREDATA(_p)				(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+7])
-
-//#define RTMP_SET_PACKET_NET_DEVICE_MBSSID(_p, _bss)	(RTPKT_TO_OSPKT(_p)->cb[8] = _bss)
-//#define RTMP_GET_PACKET_NET_DEVICE_MBSSID(_p)		(RTPKT_TO_OSPKT(_p)->cb[8])
-
-//
-//	Sepcific Pakcet Type definition
-//
-#define RTMP_PACKET_SPECIFIC_CB_OFFSET	11
-
-#define RTMP_PACKET_SPECIFIC_DHCP		0x01
-#define RTMP_PACKET_SPECIFIC_EAPOL		0x02
-#define RTMP_PACKET_SPECIFIC_IPV4		0x04
-#define RTMP_PACKET_SPECIFIC_WAI		0x08
-#define RTMP_PACKET_SPECIFIC_VLAN		0x10
-#define RTMP_PACKET_SPECIFIC_LLCSNAP	0x20
-
-//Specific
-#define RTMP_SET_PACKET_SPECIFIC(_p, _flg)	   	(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] = _flg)
-
-//DHCP
-#define RTMP_SET_PACKET_DHCP(_p, _flg)   													\
-			do{																				\
-				if (_flg)																	\
-					(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) |= (RTMP_PACKET_SPECIFIC_DHCP);		\
-				else																		\
-					(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) &= (!RTMP_PACKET_SPECIFIC_DHCP);	\
-			}while(0)
-#define RTMP_GET_PACKET_DHCP(_p)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_DHCP)
-
-//EAPOL
-#define RTMP_SET_PACKET_EAPOL(_p, _flg)   													\
-			do{																				\
-				if (_flg)																	\
-					(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) |= (RTMP_PACKET_SPECIFIC_EAPOL);		\
-				else																		\
-					(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) &= (!RTMP_PACKET_SPECIFIC_EAPOL);	\
-			}while(0)
-#define RTMP_GET_PACKET_EAPOL(_p)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_EAPOL)
-
-//WAI
-#define RTMP_SET_PACKET_WAI(_p, _flg)   													\
-			do{																				\
-				if (_flg)																	\
-					(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) |= (RTMP_PACKET_SPECIFIC_WAI);		\
-				else																		\
-					(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) &= (!RTMP_PACKET_SPECIFIC_WAI);	\
-			}while(0)
-#define RTMP_GET_PACKET_WAI(_p)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_WAI)
-
-#define RTMP_GET_PACKET_LOWRATE(_p)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & (RTMP_PACKET_SPECIFIC_EAPOL | RTMP_PACKET_SPECIFIC_DHCP | RTMP_PACKET_SPECIFIC_WAI))
-
-//VLAN
-#define RTMP_SET_PACKET_VLAN(_p, _flg)   													\
-			do{																				\
-				if (_flg)																	\
-					(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) |= (RTMP_PACKET_SPECIFIC_VLAN);		\
-				else																		\
-					(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) &= (!RTMP_PACKET_SPECIFIC_VLAN);	\
-			}while(0)
-#define RTMP_GET_PACKET_VLAN(_p)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_VLAN)
-
-//LLC/SNAP
-#define RTMP_SET_PACKET_LLCSNAP(_p, _flg)   													\
-			do{																				\
-				if (_flg)																	\
-					(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) |= (RTMP_PACKET_SPECIFIC_LLCSNAP);		\
-				else																		\
-					(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) &= (!RTMP_PACKET_SPECIFIC_LLCSNAP);		\
-			}while(0)
-
-#define RTMP_GET_PACKET_LLCSNAP(_p)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_LLCSNAP)
-
-// IP
-#define RTMP_SET_PACKET_IPV4(_p, _flg)														\
-			do{																				\
-				if (_flg)																	\
-					(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) |= (RTMP_PACKET_SPECIFIC_IPV4);		\
-				else																		\
-					(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) &= (!RTMP_PACKET_SPECIFIC_IPV4);	\
-			}while(0)
-
-#define RTMP_GET_PACKET_IPV4(_p)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_IPV4)
-
-// If this flag is set, it indicates that this EAPoL frame MUST be clear.
-#define RTMP_SET_PACKET_CLEAR_EAP_FRAME(_p, _flg)   (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+12] = _flg)
-#define RTMP_GET_PACKET_CLEAR_EAP_FRAME(_p)         (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+12])
-
-#define RTMP_SET_PACKET_5VT(_p, _flg)   (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+22] = _flg)
-#define RTMP_GET_PACKET_5VT(_p)         (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+22])
-
-
-#ifdef INF_AMAZON_SE
-/*Iverson patch for WMM A5-T07 ,WirelessStaToWirelessSta do not bulk out aggregate */
-#define RTMP_SET_PACKET_NOBULKOUT(_p, _morebit)			(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+23] = _morebit)
-#define RTMP_GET_PACKET_NOBULKOUT(_p)					(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+23])
-#endif // INF_AMAZON_SE //
-
-
-
-#ifdef CONFIG_5VT_ENHANCE
-#define BRIDGE_TAG 0x35564252    // depends on 5VT define in br_input.c
-#endif
-
-
-#define NDIS_SET_PACKET_STATUS(_p, _status)
-
-
-#define GET_SG_LIST_FROM_PACKET(_p, _sc)	\
-    rt_get_sg_list_from_packet(_p, _sc)
-
-#define NdisMoveMemory(Destination, Source, Length) memmove(Destination, Source, Length)
-#define NdisZeroMemory(Destination, Length)         memset(Destination, 0, Length)
-#define NdisFillMemory(Destination, Length, Fill)   memset(Destination, Fill, Length)
-#define NdisEqualMemory(Source1, Source2, Length)   (!memcmp(Source1, Source2, Length))
-#define RTMPEqualMemory(Source1, Source2, Length)	(!memcmp(Source1, Source2, Length))
-
-
-#define RTMP_INC_REF(_A)		0
-#define RTMP_DEC_REF(_A)		0
-#define RTMP_GET_REF(_A)		0
-
-
-
-/*
- * ULONG
- * RTMP_GetPhysicalAddressLow(
- *   IN NDIS_PHYSICAL_ADDRESS  PhysicalAddress);
- */
-#define RTMP_GetPhysicalAddressLow(PhysicalAddress)		(PhysicalAddress)
-
-/*
- * ULONG
- * RTMP_GetPhysicalAddressHigh(
- *   IN NDIS_PHYSICAL_ADDRESS  PhysicalAddress);
- */
-#define RTMP_GetPhysicalAddressHigh(PhysicalAddress)		(0)
-
-/*
- * VOID
- * RTMP_SetPhysicalAddressLow(
- *   IN NDIS_PHYSICAL_ADDRESS  PhysicalAddress,
- *   IN ULONG  Value);
- */
-#define RTMP_SetPhysicalAddressLow(PhysicalAddress, Value)	\
-			PhysicalAddress = Value;
-
-/*
- * VOID
- * RTMP_SetPhysicalAddressHigh(
- *   IN NDIS_PHYSICAL_ADDRESS  PhysicalAddress,
- *   IN ULONG  Value);
- */
-#define RTMP_SetPhysicalAddressHigh(PhysicalAddress, Value)
-
-
-//CONTAINING_RECORD(pEntry, NDIS_PACKET, MiniportReservedEx);
-#define QUEUE_ENTRY_TO_PACKET(pEntry) \
-	(PNDIS_PACKET)(pEntry)
-
-#define PACKET_TO_QUEUE_ENTRY(pPacket) \
-	(PQUEUE_ENTRY)(pPacket)
-
-
-#ifndef CONTAINING_RECORD
-#define CONTAINING_RECORD(address, type, field)			\
-((type *)((PCHAR)(address) - offsetof(type, field)))
-#endif
-
-
-#define RELEASE_NDIS_PACKET(_pAd, _pPacket, _Status)                    \
-{                                                                       \
-        RTMPFreeNdisPacket(_pAd, _pPacket);                             \
-}
-
-
-#define SWITCH_PhyAB(_pAA, _pBB)    \
-{                                                                           \
-    ULONG	AABasePaHigh;                           \
-    ULONG	AABasePaLow;                           \
-    ULONG	BBBasePaHigh;                           \
-    ULONG	BBBasePaLow;                           \
-    BBBasePaHigh = RTMP_GetPhysicalAddressHigh(_pBB);                                                 \
-    BBBasePaLow = RTMP_GetPhysicalAddressLow(_pBB);                                                 \
-    AABasePaHigh = RTMP_GetPhysicalAddressHigh(_pAA);                                                 \
-    AABasePaLow = RTMP_GetPhysicalAddressLow(_pAA);                                                 \
-    RTMP_SetPhysicalAddressHigh(_pAA, BBBasePaHigh);                                                 \
-    RTMP_SetPhysicalAddressLow(_pAA, BBBasePaLow);                                                 \
-    RTMP_SetPhysicalAddressHigh(_pBB, AABasePaHigh);                                                 \
-    RTMP_SetPhysicalAddressLow(_pBB, AABasePaLow);                                                 \
-}
-
-
-#define NdisWriteErrorLogEntry(_a, _b, _c, _d)
-#define NdisMAllocateMapRegisters(_a, _b, _c, _d, _e)		NDIS_STATUS_SUCCESS
-
-
-#define NdisAcquireSpinLock		RTMP_SEM_LOCK
-#define NdisReleaseSpinLock		RTMP_SEM_UNLOCK
-
-static inline void NdisGetSystemUpTime(ULONG *time)
-{
-	*time = jiffies;
-}
-
-//pPacket = CONTAINING_RECORD(pEntry, NDIS_PACKET, MiniportReservedEx);
-#define QUEUE_ENTRY_TO_PKT(pEntry) \
-		((PNDIS_PACKET) (pEntry))
-
-int rt28xx_packet_xmit(struct sk_buff *skb);
-
-
-
-void rtmp_os_thread_init(PUCHAR pThreadName, PVOID pNotify);
-
-
-
+#include "../../rt2870/rt_linux.h"
diff --git a/drivers/staging/rt3070/rt_main_dev.c b/drivers/staging/rt3070/rt_main_dev.c
index 81f769cf109..c8bcd4029c3 100644
--- a/drivers/staging/rt3070/rt_main_dev.c
+++ b/drivers/staging/rt3070/rt_main_dev.c
@@ -1,1801 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-    rt_main_dev.c
-
-    Abstract:
-    Create and register network interface.
-
-    Revision History:
-    Who         When            What
-    --------    ----------      ----------------------------------------------
-	Sample		Mar/21/07		Merge RT2870 and RT2860 drivers.
-*/
-
-#include "rt_config.h"
-
-#define FORTY_MHZ_INTOLERANT_INTERVAL	(60*1000) // 1 min
-
-#ifdef MULTIPLE_CARD_SUPPORT
-// record whether the card in the card list is used in the card file
-UINT8  MC_CardUsed[MAX_NUM_OF_MULTIPLE_CARD];
-// record used card mac address in the card list
-static UINT8  MC_CardMac[MAX_NUM_OF_MULTIPLE_CARD][6];
-#endif // MULTIPLE_CARD_SUPPORT //
-
-#ifdef CONFIG_APSTA_MIXED_SUPPORT
-UINT32 CW_MAX_IN_BITS;
-#endif // CONFIG_APSTA_MIXED_SUPPORT //
-
-/*---------------------------------------------------------------------*/
-/* Private Variables Used                                              */
-/*---------------------------------------------------------------------*/
-//static RALINK_TIMER_STRUCT     PeriodicTimer;
-
-char *mac = "";		   // default 00:00:00:00:00:00
-char *hostname = "";		   // default CMPC
-#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,12)
-MODULE_PARM (mac, "s");
-#else
-module_param (mac, charp, 0);
-#endif
-MODULE_PARM_DESC (mac, "rt28xx: wireless mac addr");
-
-
-/*---------------------------------------------------------------------*/
-/* Prototypes of Functions Used                                        */
-/*---------------------------------------------------------------------*/
-#ifdef DOT11_N_SUPPORT
-extern BOOLEAN ba_reordering_resource_init(PRTMP_ADAPTER pAd, int num);
-extern void ba_reordering_resource_release(PRTMP_ADAPTER pAd);
-#endif // DOT11_N_SUPPORT //
-extern NDIS_STATUS NICLoadRateSwitchingParams(IN PRTMP_ADAPTER pAd);
-
-
-// public function prototype
-INT __devinit rt28xx_probe(IN void *_dev_p, IN void *_dev_id_p,
-							IN UINT argc, OUT PRTMP_ADAPTER *ppAd);
-
-// private function prototype
-static int rt28xx_init(IN struct net_device *net_dev);
-INT rt28xx_send_packets(IN struct sk_buff *skb_p, IN struct net_device *net_dev);
-
-#if LINUX_VERSION_CODE <= 0x20402	// Red Hat 7.1
-struct net_device *alloc_netdev(
-	int sizeof_priv,
-	const char *mask,
-	void (*setup)(struct net_device *));
-#endif // LINUX_VERSION_CODE //
-
-static void CfgInitHook(PRTMP_ADAPTER pAd);
-//static BOOLEAN RT28XXAvailRANameAssign(IN CHAR *name_p);
-
-#ifdef CONFIG_STA_SUPPORT
-extern	const struct iw_handler_def rt28xx_iw_handler_def;
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef CONFIG_APSTA_MIXED_SUPPORT
-extern	const struct iw_handler_def rt28xx_ap_iw_handler_def;
-#endif // CONFIG_APSTA_MIXED_SUPPORT //
-
-#if WIRELESS_EXT >= 12
-// This function will be called when query /proc
-struct iw_statistics *rt28xx_get_wireless_stats(
-    IN struct net_device *net_dev);
-#endif
-
-struct net_device_stats *RT28xx_get_ether_stats(
-    IN  struct net_device *net_dev);
-
-/*
-========================================================================
-Routine Description:
-    Close raxx interface.
-
-Arguments:
-	*net_dev			the raxx interface pointer
-
-Return Value:
-    0					Open OK
-	otherwise			Open Fail
-
-Note:
-	1. if open fail, kernel will not call the close function.
-	2. Free memory for
-		(1) Mlme Memory Handler:		MlmeHalt()
-		(2) TX & RX:					RTMPFreeTxRxRingMemory()
-		(3) BA Reordering: 				ba_reordering_resource_release()
-========================================================================
-*/
-int MainVirtualIF_close(IN struct net_device *net_dev)
-{
-    RTMP_ADAPTER *pAd = net_dev->ml_priv;
-
-	// Sanity check for pAd
-	if (pAd == NULL)
-		return 0; // close ok
-
-	netif_carrier_off(pAd->net_dev);
-	netif_stop_queue(pAd->net_dev);
-
-
-
-	VIRTUAL_IF_DOWN(pAd);
-
-	RT_MOD_DEC_USE_COUNT();
-
-	return 0; // close ok
-}
-
-/*
-========================================================================
-Routine Description:
-    Open raxx interface.
-
-Arguments:
-	*net_dev			the raxx interface pointer
-
-Return Value:
-    0					Open OK
-	otherwise			Open Fail
-
-Note:
-	1. if open fail, kernel will not call the close function.
-	2. Free memory for
-		(1) Mlme Memory Handler:		MlmeHalt()
-		(2) TX & RX:					RTMPFreeTxRxRingMemory()
-		(3) BA Reordering: 				ba_reordering_resource_release()
-========================================================================
-*/
-int MainVirtualIF_open(IN struct net_device *net_dev)
-{
-    RTMP_ADAPTER *pAd = net_dev->ml_priv;
-
-	// Sanity check for pAd
-	if (pAd == NULL)
-		return 0; // close ok
-
-	if (VIRTUAL_IF_UP(pAd) != 0)
-		return -1;
-
-	// increase MODULE use count
-	RT_MOD_INC_USE_COUNT();
-
-	netif_start_queue(net_dev);
-	netif_carrier_on(net_dev);
-	netif_wake_queue(net_dev);
-
-	return 0;
-}
-
-/*
-========================================================================
-Routine Description:
-    Close raxx interface.
-
-Arguments:
-	*net_dev			the raxx interface pointer
-
-Return Value:
-    0					Open OK
-	otherwise			Open Fail
-
-Note:
-	1. if open fail, kernel will not call the close function.
-	2. Free memory for
-		(1) Mlme Memory Handler:		MlmeHalt()
-		(2) TX & RX:					RTMPFreeTxRxRingMemory()
-		(3) BA Reordering: 				ba_reordering_resource_release()
-========================================================================
-*/
-int rt28xx_close(IN PNET_DEV dev)
-{
-	struct net_device * net_dev = (struct net_device *)dev;
-    RTMP_ADAPTER	*pAd = net_dev->ml_priv;
-	BOOLEAN 		Cancelled = FALSE;
-	UINT32			i = 0;
-#ifdef RT2870
-	DECLARE_WAIT_QUEUE_HEAD(unlink_wakeup);
-	DECLARE_WAITQUEUE(wait, current);
-
-	//RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
-#endif // RT2870 //
-
-
-    DBGPRINT(RT_DEBUG_TRACE, ("===> rt28xx_close\n"));
-
-	// Sanity check for pAd
-	if (pAd == NULL)
-		return 0; // close ok
-
-
-#ifdef WDS_SUPPORT
-	WdsDown(pAd);
-#endif // WDS_SUPPORT //
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-
-		// If dirver doesn't wake up firmware here,
-		// NICLoadFirmware will hang forever when interface is up again.
-		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
-        {
-		    AsicForceWakeup(pAd, TRUE);
-        }
-
-#ifdef QOS_DLS_SUPPORT
-		// send DLS-TEAR_DOWN message,
-		if (pAd->CommonCfg.bDLSCapable)
-		{
-			UCHAR i;
-
-			// tear down local dls table entry
-			for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-			{
-				if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
-				{
-					RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
-					pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-					pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-				}
-			}
-
-			// tear down peer dls table entry
-			for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
-			{
-				if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
-				{
-					RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
-					pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
-					pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-				}
-			}
-			RT28XX_MLME_HANDLER(pAd);
-		}
-#endif // QOS_DLS_SUPPORT //
-
-		if (INFRA_ON(pAd) &&
-			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
-		{
-			MLME_DISASSOC_REQ_STRUCT	DisReq;
-			MLME_QUEUE_ELEM *MsgElem = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);
-
-			COPY_MAC_ADDR(DisReq.Addr, pAd->CommonCfg.Bssid);
-			DisReq.Reason =  REASON_DEAUTH_STA_LEAVING;
-
-			MsgElem->Machine = ASSOC_STATE_MACHINE;
-			MsgElem->MsgType = MT2_MLME_DISASSOC_REQ;
-			MsgElem->MsgLen = sizeof(MLME_DISASSOC_REQ_STRUCT);
-			NdisMoveMemory(MsgElem->Msg, &DisReq, sizeof(MLME_DISASSOC_REQ_STRUCT));
-
-			// Prevent to connect AP again in STAMlmePeriodicExec
-			pAd->MlmeAux.AutoReconnectSsidLen= 32;
-			NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
-
-			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
-			MlmeDisassocReqAction(pAd, MsgElem);
-			kfree(MsgElem);
-
-			RTMPusecDelay(1000);
-		}
-
-#ifdef RT2870
-	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
-#endif // RT2870 //
-
-#ifdef CCX_SUPPORT
-		RTMPCancelTimer(&pAd->StaCfg.LeapAuthTimer, &Cancelled);
-#endif
-
-		RTMPCancelTimer(&pAd->StaCfg.StaQuickResponeForRateUpTimer, &Cancelled);
-		RTMPCancelTimer(&pAd->StaCfg.WpaDisassocAndBlockAssocTimer, &Cancelled);
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-		{
-			union iwreq_data    wrqu;
-			// send wireless event to wpa_supplicant for infroming interface down.
-			memset(&wrqu, 0, sizeof(wrqu));
-			wrqu.data.flags = RT_INTERFACE_DOWN;
-			wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL);
-		}
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-		MlmeRadioOff(pAd);
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
-
-	for (i = 0 ; i < NUM_OF_TX_RING; i++)
-	{
-		while (pAd->DeQueueRunning[i] == TRUE)
-		{
-			printk("Waiting for TxQueue[%d] done..........\n", i);
-			RTMPusecDelay(1000);
-		}
-	}
-
-#ifdef RT2870
-	// ensure there are no more active urbs.
-	add_wait_queue (&unlink_wakeup, &wait);
-	pAd->wait = &unlink_wakeup;
-
-	// maybe wait for deletions to finish.
-	i = 0;
-	//while((i < 25) && atomic_read(&pAd->PendingRx) > 0)
-	while(i < 25)
-	{
-		unsigned long IrqFlags;
-
-		RTMP_IRQ_LOCK(&pAd->BulkInLock, IrqFlags);
-		if (pAd->PendingRx == 0)
-		{
-			RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
-			break;
-		}
-		RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
-
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,9)
-		msleep(UNLINK_TIMEOUT_MS);	//Time in millisecond
-#else
-		RTMPusecDelay(UNLINK_TIMEOUT_MS*1000);	//Time in microsecond
-#endif
-		i++;
-	}
-	pAd->wait = NULL;
-	remove_wait_queue (&unlink_wakeup, &wait);
-#endif // RT2870 //
-
-	//RTUSBCleanUpMLMEWaitQueue(pAd);	/*not used in RT28xx*/
-
-
-#ifdef RT2870
-	// We need clear timerQ related structure before exits of the timer thread.
-	RT2870_TimerQ_Exit(pAd);
-	// Close kernel threads or tasklets
-	RT28xxThreadTerminate(pAd);
-#endif // RT2870 //
-
-	// Stop Mlme state machine
-	MlmeHalt(pAd);
-
-	// Close kernel threads or tasklets
-	kill_thread_task(pAd);
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		MacTableReset(pAd);
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-
-	MeasureReqTabExit(pAd);
-	TpcReqTabExit(pAd);
-
-
-
-
-	// Free Ring or USB buffers
-	RTMPFreeTxRxRingMemory(pAd);
-
-	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
-
-#ifdef DOT11_N_SUPPORT
-	// Free BA reorder resource
-	ba_reordering_resource_release(pAd);
-#endif // DOT11_N_SUPPORT //
-
-#ifdef RT2870
-#ifdef INF_AMAZON_SE
-	if (pAd->UsbVendorReqBuf)
-		os_free_mem(pAd, pAd->UsbVendorReqBuf);
-#endif // INF_AMAZON_SE //
-#endif // RT2870 //
-
-	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_START_UP);
-
-	return 0; // close ok
-} /* End of rt28xx_close */
-
-static int rt28xx_init(IN struct net_device *net_dev)
-{
-	PRTMP_ADAPTER 			pAd = net_dev->ml_priv;
-	UINT					index;
-	UCHAR					TmpPhy;
-//	ULONG					Value=0;
-	NDIS_STATUS				Status;
-//    OID_SET_HT_PHYMODE		SetHT;
-//	WPDMA_GLO_CFG_STRUC     GloCfg;
-	UINT32 		MacCsr0 = 0;
-
-#ifdef RT2870
-#ifdef INF_AMAZON_SE
-	init_MUTEX(&(pAd->UsbVendorReq_semaphore));
-	os_alloc_mem(pAd, (PUCHAR)&pAd->UsbVendorReqBuf, MAX_PARAM_BUFFER_SIZE - 1);
-	if (pAd->UsbVendorReqBuf == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("Allocate vendor request temp buffer failed!\n"));
-		goto err0;
-	}
-#endif // INF_AMAZON_SE //
-#endif // RT2870 //
-
-#ifdef DOT11_N_SUPPORT
-	// Allocate BA Reordering memory
-	ba_reordering_resource_init(pAd, MAX_REORDERING_MPDU_NUM);
-#endif // DOT11_N_SUPPORT //
-
-	// Make sure MAC gets ready.
-	index = 0;
-	do
-	{
-		RTMP_IO_READ32(pAd, MAC_CSR0, &MacCsr0);
-		pAd->MACVersion = MacCsr0;
-
-		if ((pAd->MACVersion != 0x00) && (pAd->MACVersion != 0xFFFFFFFF))
-			break;
-
-		RTMPusecDelay(10);
-	} while (index++ < 100);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("MAC_CSR0  [ Ver:Rev=0x%08x]\n", pAd->MACVersion));
-/*Iverson patch PCIE L1 issue */
-
-	// Disable DMA
-	RT28XXDMADisable(pAd);
-
-
-	// Load 8051 firmware
-	Status = NICLoadFirmware(pAd);
-	if (Status != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT_ERR(("NICLoadFirmware failed, Status[=0x%08x]\n", Status));
-		goto err1;
-	}
-
-	NICLoadRateSwitchingParams(pAd);
-
-	// Disable interrupts here which is as soon as possible
-	// This statement should never be true. We might consider to remove it later
-
-	Status = RTMPAllocTxRxRingMemory(pAd);
-	if (Status != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT_ERR(("RTMPAllocDMAMemory failed, Status[=0x%08x]\n", Status));
-		goto err1;
-	}
-
-	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
-
-	// initialize MLME
-	//
-
-	Status = MlmeInit(pAd);
-	if (Status != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT_ERR(("MlmeInit failed, Status[=0x%08x]\n", Status));
-		goto err2;
-	}
-
-	// Initialize pAd->StaCfg, pAd->ApCfg, pAd->CommonCfg to manufacture default
-	//
-	UserCfgInit(pAd);
-
-#ifdef RT2870
-	// We need init timerQ related structure before create the timer thread.
-	RT2870_TimerQ_Init(pAd);
-#endif // RT2870 //
-
-	RT28XX_TASK_THREAD_INIT(pAd, Status);
-	if (Status != NDIS_STATUS_SUCCESS)
-		goto err1;
-
-//	COPY_MAC_ADDR(pAd->ApCfg.MBSSID[apidx].Bssid, netif->hwaddr);
-//	pAd->bForcePrintTX = TRUE;
-
-	CfgInitHook(pAd);
-
-
-#ifdef BLOCK_NET_IF
-	initblockQueueTab(pAd);
-#endif // BLOCK_NET_IF //
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		NdisAllocateSpinLock(&pAd->MacTabLock);
-#endif // CONFIG_STA_SUPPORT //
-
-	MeasureReqTabInit(pAd);
-	TpcReqTabInit(pAd);
-
-	//
-	// Init the hardware, we need to init asic before read registry, otherwise mac register will be reset
-	//
-	Status = NICInitializeAdapter(pAd, TRUE);
-	if (Status != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT_ERR(("NICInitializeAdapter failed, Status[=0x%08x]\n", Status));
-		if (Status != NDIS_STATUS_SUCCESS)
-		goto err3;
-	}
-
-	// Read parameters from Config File
-	Status = RTMPReadParametersHook(pAd);
-
-	printk("1. Phy Mode = %d\n", pAd->CommonCfg.PhyMode);
-	if (Status != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT_ERR(("NICReadRegParameters failed, Status[=0x%08x]\n",Status));
-		goto err4;
-	}
-
-#ifdef RT2870
-	pAd->CommonCfg.bMultipleIRP = FALSE;
-
-	if (pAd->CommonCfg.bMultipleIRP)
-		pAd->CommonCfg.NumOfBulkInIRP = RX_RING_SIZE;
-	else
-		pAd->CommonCfg.NumOfBulkInIRP = 1;
-#endif // RT2870 //
-
-
-   	//Init Ba Capability parameters.
-//	RT28XX_BA_INIT(pAd);
-#ifdef DOT11_N_SUPPORT
-	pAd->CommonCfg.DesiredHtPhy.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
-	pAd->CommonCfg.DesiredHtPhy.AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable;
-	pAd->CommonCfg.DesiredHtPhy.AmsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
-	pAd->CommonCfg.DesiredHtPhy.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
-	// UPdata to HT IE
-	pAd->CommonCfg.HtCapability.HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
-	pAd->CommonCfg.HtCapability.HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
-	pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
-#endif // DOT11_N_SUPPORT //
-
-	// after reading Registry, we now know if in AP mode or STA mode
-
-	// Load 8051 firmware; crash when FW image not existent
-	// Status = NICLoadFirmware(pAd);
-	// if (Status != NDIS_STATUS_SUCCESS)
-	//    break;
-
-	printk("2. Phy Mode = %d\n", pAd->CommonCfg.PhyMode);
-
-	// We should read EEPROM for all cases.  rt2860b
-	NICReadEEPROMParameters(pAd, mac);
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-
-	printk("3. Phy Mode = %d\n", pAd->CommonCfg.PhyMode);
-
-	NICInitAsicFromEEPROM(pAd); //rt2860b
-
-	// Set PHY to appropriate mode
-	TmpPhy = pAd->CommonCfg.PhyMode;
-	pAd->CommonCfg.PhyMode = 0xff;
-	RTMPSetPhyMode(pAd, TmpPhy);
-#ifdef DOT11_N_SUPPORT
-	SetCommonHT(pAd);
-#endif // DOT11_N_SUPPORT //
-
-	// No valid channels.
-	if (pAd->ChannelListNum == 0)
-	{
-		printk("Wrong configuration. No valid channel found. Check \"ContryCode\" and \"ChannelGeography\" setting.\n");
-		goto err4;
-	}
-
-#ifdef DOT11_N_SUPPORT
-	printk("MCS Set = %02x %02x %02x %02x %02x\n", pAd->CommonCfg.HtCapability.MCSSet[0],
-           pAd->CommonCfg.HtCapability.MCSSet[1], pAd->CommonCfg.HtCapability.MCSSet[2],
-           pAd->CommonCfg.HtCapability.MCSSet[3], pAd->CommonCfg.HtCapability.MCSSet[4]);
-#endif // DOT11_N_SUPPORT //
-
-#ifdef RT30xx
-    //Init RT30xx RFRegisters after read RFIC type from EEPROM
-	NICInitRT30xxRFRegisters(pAd);
-#endif // RT30xx //
-
-//		APInitialize(pAd);
-
-#ifdef IKANOS_VX_1X0
-	VR_IKANOS_FP_Init(pAd->ApCfg.BssidNum, pAd->PermanentAddress);
-#endif // IKANOS_VX_1X0 //
-
-		//
-	// Initialize RF register to default value
-	//
-	AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
-	AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-
-	if (pAd && (Status != NDIS_STATUS_SUCCESS))
-	{
-		//
-		// Undo everything if it failed
-		//
-		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-		{
-//			NdisMDeregisterInterrupt(&pAd->Interrupt);
-			RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
-		}
-//		RTMPFreeAdapter(pAd); // we will free it in disconnect()
-	}
-	else if (pAd)
-	{
-		// Microsoft HCT require driver send a disconnect event after driver initialization.
-		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
-//		pAd->IndicateMediaState = NdisMediaStateDisconnected;
-		RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE);
-
-		DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event B!\n"));
-
-
-#ifdef RT2870
-		RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS);
-		RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
-
-		//
-		// Support multiple BulkIn IRP,
-		// the value on pAd->CommonCfg.NumOfBulkInIRP may be large than 1.
-		//
-		for(index=0; index<pAd->CommonCfg.NumOfBulkInIRP; index++)
-		{
-			RTUSBBulkReceive(pAd);
-			DBGPRINT(RT_DEBUG_TRACE, ("RTUSBBulkReceive!\n" ));
-		}
-#endif // RT2870 //
-	}// end of else
-
-
-	DBGPRINT_S(Status, ("<==== RTMPInitialize, Status=%x\n", Status));
-
-	return TRUE;
-
-
-err4:
-err3:
-	MlmeHalt(pAd);
-err2:
-	RTMPFreeTxRxRingMemory(pAd);
-//	RTMPFreeAdapter(pAd);
-err1:
-
-#ifdef DOT11_N_SUPPORT
-	os_free_mem(pAd, pAd->mpdu_blk_pool.mem); // free BA pool
-#endif // DOT11_N_SUPPORT //
-	RT28XX_IRQ_RELEASE(net_dev);
-
-	// shall not set priv to NULL here because the priv didn't been free yet.
-	//net_dev->ml_priv = 0;
-#ifdef INF_AMAZON_SE
-err0:
-#endif // INF_AMAZON_SE //
-	printk("!!! %s Initialized fail !!!\n", RT28xx_CHIP_NAME);
-	return FALSE;
-} /* End of rt28xx_init */
-
-
-/*
-========================================================================
-Routine Description:
-    Open raxx interface.
-
-Arguments:
-	*net_dev			the raxx interface pointer
-
-Return Value:
-    0					Open OK
-	otherwise			Open Fail
-
-Note:
-========================================================================
-*/
-int rt28xx_open(IN PNET_DEV dev)
-{
-	struct net_device * net_dev = (struct net_device *)dev;
-	PRTMP_ADAPTER pAd = net_dev->ml_priv;
-	int retval = 0;
- 	POS_COOKIE pObj;
-
-
-	// Sanity check for pAd
-	if (pAd == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->ml_priv will be NULL in 2rd open */
-		return -1;
-	}
-
-#ifdef CONFIG_APSTA_MIXED_SUPPORT
-	if (pAd->OpMode == OPMODE_AP)
-	{
-		CW_MAX_IN_BITS = 6;
-	}
-	else if (pAd->OpMode == OPMODE_STA)
-	{
-		CW_MAX_IN_BITS = 10;
-	}
-
-#if WIRELESS_EXT >= 12
-	if (net_dev->ml_priv_flags == INT_MAIN)
-	{
-		if (pAd->OpMode == OPMODE_AP)
-			net_dev->wireless_handlers = (struct iw_handler_def *) &rt28xx_ap_iw_handler_def;
-		else if (pAd->OpMode == OPMODE_STA)
-			net_dev->wireless_handlers = (struct iw_handler_def *) &rt28xx_iw_handler_def;
-	}
-#endif // WIRELESS_EXT >= 12 //
-#endif // CONFIG_APSTA_MIXED_SUPPORT //
-
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-
-	// Init
- 	pObj = (POS_COOKIE)pAd->OS_Cookie;
-
-	// reset Adapter flags
-	RTMP_CLEAR_FLAGS(pAd);
-
-	// Request interrupt service routine for PCI device
-	// register the interrupt routine with the os
-	RT28XX_IRQ_REQUEST(net_dev);
-
-
-	// Init BssTab & ChannelInfo tabbles for auto channel select.
-
-
-	// Chip & other init
-	if (rt28xx_init(net_dev) == FALSE)
-		goto err;
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		NdisZeroMemory(pAd->StaCfg.dev_name, 16);
-		NdisMoveMemory(pAd->StaCfg.dev_name, net_dev->name, strlen(net_dev->name));
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	// Set up the Mac address
-	NdisMoveMemory(net_dev->dev_addr, (void *) pAd->CurrentAddress, 6);
-
-	// Init IRQ parameters
-	RT28XX_IRQ_INIT(pAd);
-
-	// Various AP function init
-
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-		{
-			union iwreq_data    wrqu;
-			// send wireless event to wpa_supplicant for infroming interface down.
-			memset(&wrqu, 0, sizeof(wrqu));
-			wrqu.data.flags = RT_INTERFACE_UP;
-			wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL);
-		}
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	// Enable Interrupt
-	RT28XX_IRQ_ENABLE(pAd);
-
-	// Now Enable RxTx
-	RTMPEnableRxTx(pAd);
-	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_START_UP);
-
-	{
-	UINT32 reg = 0;
-	RTMP_IO_READ32(pAd, 0x1300, &reg);  // clear garbage interrupts
-	printk("0x1300 = %08x\n", reg);
-	}
-
-	{
-//	u32 reg;
-//	u8  byte;
-//	u16 tmp;
-
-//	RTMP_IO_READ32(pAd, XIFS_TIME_CFG, &reg);
-
-//	tmp = 0x0805;
-//	reg  = (reg & 0xffff0000) | tmp;
-//	RTMP_IO_WRITE32(pAd, XIFS_TIME_CFG, reg);
-
-	}
-
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-
-	return (retval);
-
-err:
-	return (-1);
-} /* End of rt28xx_open */
-
-static const struct net_device_ops rt3070_netdev_ops = {
-	.ndo_open		= MainVirtualIF_open,
-	.ndo_stop		= MainVirtualIF_close,
-	.ndo_do_ioctl		= rt28xx_ioctl,
-	.ndo_get_stats		= RT28xx_get_ether_stats,
-	.ndo_validate_addr	= NULL,
-	.ndo_set_mac_address	= eth_mac_addr,
-	.ndo_change_mtu		= eth_change_mtu,
-#ifdef IKANOS_VX_1X0
-	.ndo_start_xmit		= IKANOS_DataFramesTx,
-#else
-	.ndo_start_xmit		= rt28xx_send_packets,
-#endif
-};
-
-/* Must not be called for mdev and apdev */
-static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER pAd)
-{
-	NDIS_STATUS Status;
-	INT     i=0;
-	CHAR    slot_name[IFNAMSIZ];
-	struct net_device   *device;
-
-
-	//ether_setup(dev);
-//	dev->set_multicast_list = ieee80211_set_multicast_list;
-//	dev->change_mtu = ieee80211_change_mtu;
-#ifdef CONFIG_STA_SUPPORT
-#if WIRELESS_EXT >= 12
-	if (pAd->OpMode == OPMODE_STA)
-	{
-		dev->wireless_handlers = &rt28xx_iw_handler_def;
-	}
-#endif //WIRELESS_EXT >= 12
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef CONFIG_APSTA_MIXED_SUPPORT
-#if WIRELESS_EXT >= 12
-	if (pAd->OpMode == OPMODE_AP)
-	{
-		dev->wireless_handlers = &rt28xx_ap_iw_handler_def;
-	}
-#endif //WIRELESS_EXT >= 12
-#endif // CONFIG_APSTA_MIXED_SUPPORT //
-
-#if WIRELESS_EXT < 21
-		dev->get_wireless_stats = rt28xx_get_wireless_stats;
-#endif
-//	dev->uninit = ieee80211_if_reinit;
-//	dev->destructor = ieee80211_if_free;
-	dev->priv_flags = INT_MAIN;
-	dev->netdev_ops = &rt3070_netdev_ops;
-	// find available device name
-	for (i = 0; i < 8; i++)
-	{
-#ifdef MULTIPLE_CARD_SUPPORT
-		if (pAd->MC_RowID >= 0)
-			sprintf(slot_name, "ra%02d_%d", pAd->MC_RowID, i);
-		else
-#endif // MULTIPLE_CARD_SUPPORT //
-		sprintf(slot_name, "ra%d", i);
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26)
-        device = dev_get_by_name(dev_net(dev), slot_name);
-#else
-        device = dev_get_by_name(dev->nd_net, slot_name);
-#endif
-#else
-		device = dev_get_by_name(slot_name);
-#endif
-		if (device != NULL) dev_put(device);
-#else
-		for (device = dev_base; device != NULL; device = device->next)
-		{
-			if (strncmp(device->name, slot_name, 4) == 0)
-				break;
-		}
-#endif
-		if(device == NULL)
-			break;
-	}
-
-	if(i == 8)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("No available slot name\n"));
-		Status = NDIS_STATUS_FAILURE;
-	}
-	else
-	{
-#ifdef MULTIPLE_CARD_SUPPORT
-		if (pAd->MC_RowID >= 0)
-	        sprintf(dev->name, "ra%02d_%d", pAd->MC_RowID, i);
-		else
-#endif // MULTIPLE_CARD_SUPPORT //
-		sprintf(dev->name, "ra%d", i);
-		Status = NDIS_STATUS_SUCCESS;
-	}
-
-	return Status;
-
-}
-
-
-#ifdef MULTIPLE_CARD_SUPPORT
-/*
-========================================================================
-Routine Description:
-    Get card profile path.
-
-Arguments:
-    pAd
-
-Return Value:
-    TRUE		- Find a card profile
-	FALSE		- use default profile
-
-Note:
-========================================================================
-*/
-extern INT RTMPGetKeyParameter(
-    IN  PCHAR   key,
-    OUT PCHAR   dest,
-    IN  INT     destsize,
-    IN  PCHAR   buffer);
-
-BOOLEAN RTMP_CardInfoRead(
-	IN	PRTMP_ADAPTER pAd)
-{
-#define MC_SELECT_CARDID		0	/* use CARD ID (0 ~ 31) to identify different cards */
-#define MC_SELECT_MAC			1	/* use CARD MAC to identify different cards */
-#define MC_SELECT_CARDTYPE		2	/* use CARD type (abgn or bgn) to identify different cards */
-
-#define LETTER_CASE_TRANSLATE(txt_p, card_id)			\
-	{	UINT32 _len; char _char;						\
-		for(_len=0; _len<strlen(card_id); _len++) {		\
-			_char = *(txt_p + _len);					\
-			if (('A' <= _char) && (_char <= 'Z'))		\
-				*(txt_p+_len) = 'a'+(_char-'A');		\
-		} }
-
-	struct file *srcf;
-	INT retval, orgfsuid, orgfsgid;
-   	mm_segment_t orgfs;
-	CHAR *buffer, *tmpbuf, card_id_buf[30], RFIC_word[30];
-	BOOLEAN flg_match_ok = FALSE;
-	INT32 card_select_method;
-	INT32 card_free_id, card_nouse_id, card_same_mac_id, card_match_id;
-	EEPROM_ANTENNA_STRUC antenna;
-	USHORT addr01, addr23, addr45;
-	UINT8 mac[6];
-	UINT32 data, card_index;
-	UCHAR *start_ptr;
-
-
-	// init
-	buffer = kmalloc(MAX_INI_BUFFER_SIZE, MEM_ALLOC_FLAG);
-	if (buffer == NULL)
-        return FALSE;
-
-	tmpbuf = kmalloc(MAX_PARAM_BUFFER_SIZE, MEM_ALLOC_FLAG);
-	if(tmpbuf == NULL)
-	{
-		kfree(buffer);
-        return NDIS_STATUS_FAILURE;
-	}
-
-	orgfsuid = current->fsuid;
-	orgfsgid = current->fsgid;
-	current->fsuid = current->fsgid = 0;
-    orgfs = get_fs();
-    set_fs(KERNEL_DS);
-
-	// get RF IC type
-	RTMP_IO_READ32(pAd, E2PROM_CSR, &data);
-
-	if ((data & 0x30) == 0)
-		pAd->EEPROMAddressNum = 6;	// 93C46
-	else if ((data & 0x30) == 0x10)
-		pAd->EEPROMAddressNum = 8;	// 93C66
-	else
-		pAd->EEPROMAddressNum = 8;	// 93C86
-
-	//antenna.word = RTMP_EEPROM_READ16(pAd, EEPROM_NIC1_OFFSET);
-	RT28xx_EEPROM_READ16(pAd, EEPROM_NIC1_OFFSET, antenna.word);
-
-	if ((antenna.field.RfIcType == RFIC_2850) ||
-		(antenna.field.RfIcType == RFIC_2750))
-	{
-		/* ABGN card */
-		strcpy(RFIC_word, "abgn");
-	}
-	else
-	{
-		/* BGN card */
-		strcpy(RFIC_word, "bgn");
-	}
-
-	// get MAC address
-	//addr01 = RTMP_EEPROM_READ16(pAd, 0x04);
-	//addr23 = RTMP_EEPROM_READ16(pAd, 0x06);
-	//addr45 = RTMP_EEPROM_READ16(pAd, 0x08);
-	RT28xx_EEPROM_READ16(pAd, 0x04, addr01);
-	RT28xx_EEPROM_READ16(pAd, 0x06, addr23);
-	RT28xx_EEPROM_READ16(pAd, 0x08, addr45);
-
-	mac[0] = (UCHAR)(addr01 & 0xff);
-	mac[1] = (UCHAR)(addr01 >> 8);
-	mac[2] = (UCHAR)(addr23 & 0xff);
-	mac[3] = (UCHAR)(addr23 >> 8);
-	mac[4] = (UCHAR)(addr45 & 0xff);
-	mac[5] = (UCHAR)(addr45 >> 8);
-
-	// open card information file
-	srcf = filp_open(CARD_INFO_PATH, O_RDONLY, 0);
-	if (IS_ERR(srcf))
-	{
-		/* card information file does not exist */
-			DBGPRINT(RT_DEBUG_TRACE,
-				("--> Error %ld opening %s\n", -PTR_ERR(srcf), CARD_INFO_PATH));
-		return FALSE;
-	}
-
-	if (srcf->f_op && srcf->f_op->read)
-	{
-		/* card information file exists so reading the card information */
-		memset(buffer, 0x00, MAX_INI_BUFFER_SIZE);
-		retval = srcf->f_op->read(srcf, buffer, MAX_INI_BUFFER_SIZE, &srcf->f_pos);
-		if (retval < 0)
-		{
-			/* read fail */
-				DBGPRINT(RT_DEBUG_TRACE,
-					("--> Read %s error %d\n", CARD_INFO_PATH, -retval));
-		}
-		else
-		{
-			/* get card selection method */
-			memset(tmpbuf, 0x00, MAX_PARAM_BUFFER_SIZE);
-			card_select_method = MC_SELECT_CARDTYPE; // default
-
-			if (RTMPGetKeyParameter("SELECT", tmpbuf, 256, buffer))
-			{
-				if (strcmp(tmpbuf, "CARDID") == 0)
-					card_select_method = MC_SELECT_CARDID;
-				else if (strcmp(tmpbuf, "MAC") == 0)
-					card_select_method = MC_SELECT_MAC;
-				else if (strcmp(tmpbuf, "CARDTYPE") == 0)
-					card_select_method = MC_SELECT_CARDTYPE;
-			}
-
-			DBGPRINT(RT_DEBUG_TRACE,
-					("MC> Card Selection = %d\n", card_select_method));
-
-			// init
-			card_free_id = -1;
-			card_nouse_id = -1;
-			card_same_mac_id = -1;
-			card_match_id = -1;
-
-			// search current card information records
-			for(card_index=0;
-				card_index<MAX_NUM_OF_MULTIPLE_CARD;
-				card_index++)
-			{
-				if ((*(UINT32 *)&MC_CardMac[card_index][0] == 0) &&
-					(*(UINT16 *)&MC_CardMac[card_index][4] == 0))
-				{
-					// MAC is all-0 so the entry is available
-					MC_CardUsed[card_index] = 0;
-
-					if (card_free_id < 0)
-						card_free_id = card_index; // 1st free entry
-				}
-				else
-				{
-					if (memcmp(MC_CardMac[card_index], mac, 6) == 0)
-					{
-						// we find the entry with same MAC
-						if (card_same_mac_id < 0)
-							card_same_mac_id = card_index; // 1st same entry
-					}
-					else
-					{
-						// MAC is not all-0 but used flag == 0
-						if ((MC_CardUsed[card_index] == 0) &&
-							(card_nouse_id < 0))
-						{
-							card_nouse_id = card_index; // 1st available entry
-						}
-					}
-				}
-			}
-
-			DBGPRINT(RT_DEBUG_TRACE,
-					("MC> Free = %d, Same = %d, NOUSE = %d\n",
-					card_free_id, card_same_mac_id, card_nouse_id));
-
-			if ((card_same_mac_id >= 0) &&
-				((card_select_method == MC_SELECT_CARDID) ||
-				(card_select_method == MC_SELECT_CARDTYPE)))
-			{
-				// same MAC entry is found
-				card_match_id = card_same_mac_id;
-
-				if (card_select_method == MC_SELECT_CARDTYPE)
-				{
-					// for CARDTYPE
-					sprintf(card_id_buf, "%02dCARDTYPE%s",
-							card_match_id, RFIC_word);
-
-					if ((start_ptr=rtstrstruncasecmp(buffer, card_id_buf)) != NULL)
-					{
-						// we found the card ID
-						LETTER_CASE_TRANSLATE(start_ptr, card_id_buf);
-					}
-				}
-			}
-			else
-			{
-				// the card is 1st plug-in, try to find the match card profile
-				switch(card_select_method)
-				{
-					case MC_SELECT_CARDID: // CARDID
-					default:
-						if (card_free_id >= 0)
-							card_match_id = card_free_id;
-						else
-							card_match_id = card_nouse_id;
-						break;
-
-					case MC_SELECT_MAC: // MAC
-						sprintf(card_id_buf, "MAC%02x:%02x:%02x:%02x:%02x:%02x",
-								mac[0], mac[1], mac[2],
-								mac[3], mac[4], mac[5]);
-
-						/* try to find the key word in the card file */
-						if ((start_ptr=rtstrstruncasecmp(buffer, card_id_buf)) != NULL)
-						{
-							LETTER_CASE_TRANSLATE(start_ptr, card_id_buf);
-
-							/* get the row ID (2 ASCII characters) */
-							start_ptr -= 2;
-							card_id_buf[0] = *(start_ptr);
-							card_id_buf[1] = *(start_ptr+1);
-							card_id_buf[2] = 0x00;
-
-							card_match_id = simple_strtol(card_id_buf, 0, 10);
-						}
-						break;
-
-					case MC_SELECT_CARDTYPE: // CARDTYPE
-						card_nouse_id = -1;
-
-						for(card_index=0;
-							card_index<MAX_NUM_OF_MULTIPLE_CARD;
-							card_index++)
-						{
-							sprintf(card_id_buf, "%02dCARDTYPE%s",
-									card_index, RFIC_word);
-
-							if ((start_ptr=rtstrstruncasecmp(buffer,
-														card_id_buf)) != NULL)
-							{
-								LETTER_CASE_TRANSLATE(start_ptr, card_id_buf);
-
-								if (MC_CardUsed[card_index] == 0)
-								{
-									/* current the card profile is not used */
-									if ((*(UINT32 *)&MC_CardMac[card_index][0] == 0) &&
-										(*(UINT16 *)&MC_CardMac[card_index][4] == 0))
-									{
-										// find it and no previous card use it
-										card_match_id = card_index;
-										break;
-									}
-									else
-									{
-										// ever a card use it
-										if (card_nouse_id < 0)
-											card_nouse_id = card_index;
-									}
-								}
-							}
-						}
-
-						// if not find a free one, use the available one
-						if (card_match_id < 0)
-							card_match_id = card_nouse_id;
-						break;
-				}
-			}
-
-			if (card_match_id >= 0)
-			{
-				// make up search keyword
-				switch(card_select_method)
-				{
-					case MC_SELECT_CARDID: // CARDID
-						sprintf(card_id_buf, "%02dCARDID", card_match_id);
-						break;
-
-					case MC_SELECT_MAC: // MAC
-						sprintf(card_id_buf,
-								"%02dmac%02x:%02x:%02x:%02x:%02x:%02x",
-								card_match_id,
-								mac[0], mac[1], mac[2],
-								mac[3], mac[4], mac[5]);
-						break;
-
-					case MC_SELECT_CARDTYPE: // CARDTYPE
-					default:
-						sprintf(card_id_buf, "%02dcardtype%s",
-								card_match_id, RFIC_word);
-						break;
-				}
-
-				DBGPRINT(RT_DEBUG_TRACE, ("Search Keyword = %s\n", card_id_buf));
-
-				// read card file path
-				if (RTMPGetKeyParameter(card_id_buf, tmpbuf, 256, buffer))
-				{
-					if (strlen(tmpbuf) < sizeof(pAd->MC_FileName))
-					{
-						// backup card information
-						pAd->MC_RowID = card_match_id; /* base 0 */
-						MC_CardUsed[card_match_id] = 1;
-						memcpy(MC_CardMac[card_match_id], mac, sizeof(mac));
-
-						// backup card file path
-						NdisMoveMemory(pAd->MC_FileName, tmpbuf , strlen(tmpbuf));
-						pAd->MC_FileName[strlen(tmpbuf)] = '\0';
-						flg_match_ok = TRUE;
-
-						DBGPRINT(RT_DEBUG_TRACE,
-								("Card Profile Name = %s\n", pAd->MC_FileName));
-					}
-					else
-					{
-						DBGPRINT(RT_DEBUG_ERROR,
-								("Card Profile Name length too large!\n"));
-					}
-				}
-				else
-				{
-					DBGPRINT(RT_DEBUG_ERROR,
-							("Can not find search key word in card.dat!\n"));
-				}
-
-				if ((flg_match_ok != TRUE) &&
-					(card_match_id < MAX_NUM_OF_MULTIPLE_CARD))
-				{
-					MC_CardUsed[card_match_id] = 0;
-					memset(MC_CardMac[card_match_id], 0, sizeof(mac));
-				}
-			} // if (card_match_id >= 0)
-		}
-	}
-
-	// close file
-	retval = filp_close(srcf, NULL);
-	set_fs(orgfs);
-	current->fsuid = orgfsuid;
-	current->fsgid = orgfsgid;
-	kfree(buffer);
-	kfree(tmpbuf);
-	return flg_match_ok;
-}
-#endif // MULTIPLE_CARD_SUPPORT //
-
-
-/*
-========================================================================
-Routine Description:
-    Probe RT28XX chipset.
-
-Arguments:
-    _dev_p				Point to the PCI or USB device
-	_dev_id_p			Point to the PCI or USB device ID
-
-Return Value:
-    0					Probe OK
-	-ENODEV				Probe Fail
-
-Note:
-========================================================================
-*/
-INT __devinit   rt28xx_probe(
-    IN  void *_dev_p,
-    IN  void *_dev_id_p,
-	IN  UINT argc,
-	OUT PRTMP_ADAPTER *ppAd)
-{
-    struct  net_device	*net_dev;
-    PRTMP_ADAPTER       pAd = (PRTMP_ADAPTER) NULL;
-    INT                 status;
-	PVOID				handle;
-#ifdef RT2870
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)	/* kernel 2.4 series */
-	struct usb_device *dev_p = (struct usb_device *)_dev_p;
-#else
-	struct usb_interface *intf = (struct usb_interface *)_dev_p;
-	struct usb_device *dev_p = interface_to_usbdev(intf);
-
-	dev_p = usb_get_dev(dev_p);
-#endif // LINUX_VERSION_CODE //
-#endif // RT2870 //
-
-
-#ifdef CONFIG_STA_SUPPORT
-    DBGPRINT(RT_DEBUG_TRACE, ("STA Driver version-%s\n", STA_DRIVER_VERSION));
-#endif // CONFIG_STA_SUPPORT //
-
-	// Check chipset vendor/product ID
-//	if (RT28XXChipsetCheck(_dev_p) == FALSE)
-//		goto err_out;
-
-#if LINUX_VERSION_CODE <= 0x20402       // Red Hat 7.1
-    net_dev = alloc_netdev(sizeof(PRTMP_ADAPTER), "eth%d", ether_setup);
-#else
-    net_dev = alloc_etherdev(sizeof(PRTMP_ADAPTER));
-#endif
-    if (net_dev == NULL)
-    {
-        printk("alloc_netdev failed\n");
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,15)
-		module_put(THIS_MODULE);
-#endif //LINUX_VERSION_CODE < KERNEL_VERSION(2,6,15)
-#else
-		MOD_DEC_USE_COUNT;
-#endif
-        goto err_out;
-    }
-
-// sample
-//	if (rt_ieee80211_if_setup(net_dev) != NDIS_STATUS_SUCCESS)
-//		goto err_out;
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)
-    SET_MODULE_OWNER(net_dev);
-#endif
-
-	netif_stop_queue(net_dev);
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-/* for supporting Network Manager */
-/* Set the sysfs physical device reference for the network logical device
- * if set prior to registration will cause a symlink during initialization.
- */
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
-    SET_NETDEV_DEV(net_dev, &(dev_p->dev));
-#endif
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-
-	// Allocate RTMP_ADAPTER miniport adapter structure
-	handle = kmalloc(sizeof(struct os_cookie), GFP_KERNEL);
-	RT28XX_HANDLE_DEV_ASSIGN(handle, dev_p);
-
-	status = RTMPAllocAdapterBlock(handle, &pAd);
-	if (status != NDIS_STATUS_SUCCESS)
-		goto err_out_free_netdev;
-
-	net_dev->ml_priv = (PVOID)pAd;
-    pAd->net_dev = net_dev; // must be before RT28XXNetDevInit()
-
-	RT28XXNetDevInit(_dev_p, net_dev, pAd);
-
-#ifdef CONFIG_STA_SUPPORT
-    pAd->StaCfg.OriDevType = net_dev->type;
-#endif // CONFIG_STA_SUPPORT //
-
-	// Find and assign a free interface name, raxx
-//	RT28XXAvailRANameAssign(net_dev->name);
-
-	// Post config
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-	if (RT28XXProbePostConfig(_dev_p, pAd, argc) == FALSE)
-		goto err_out_unmap;
-#else
-	if (RT28XXProbePostConfig(_dev_p, pAd, 0) == FALSE)
-		goto err_out_unmap;
-#endif // LINUX_VERSION_CODE //
-
-#ifdef CONFIG_STA_SUPPORT
-	pAd->OpMode = OPMODE_STA;
-#endif // CONFIG_STA_SUPPORT //
-
-
-#ifdef MULTIPLE_CARD_SUPPORT
-	// find its profile path
-	pAd->MC_RowID = -1; // use default profile path
-	RTMP_CardInfoRead(pAd);
-
-	if (pAd->MC_RowID == -1)
-#ifdef CONFIG_STA_SUPPORT
-		strcpy(pAd->MC_FileName, STA_PROFILE_PATH);
-#endif // CONFIG_STA_SUPPORT //
-
-	DBGPRINT(RT_DEBUG_TRACE,
-			("MC> ROW = %d, PATH = %s\n", pAd->MC_RowID, pAd->MC_FileName));
-#endif // MULTIPLE_CARD_SUPPORT //
-
-	// sample move
-	if (rt_ieee80211_if_setup(net_dev, pAd) != NDIS_STATUS_SUCCESS)
-		goto err_out_unmap;
-
-    // Register this device
-    status = register_netdev(net_dev);
-    if (status)
-        goto err_out_unmap;
-
-    // Set driver data
-	RT28XX_DRVDATA_SET(_dev_p);
-
-
-
-	*ppAd = pAd;
-    return 0; // probe ok
-
-
-	/* --------------------------- ERROR HANDLE --------------------------- */
-err_out_unmap:
-	RTMPFreeAdapter(pAd);
-	RT28XX_UNMAP();
-
-err_out_free_netdev:
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-    free_netdev(net_dev);
-#else
-	kfree(net_dev);
-#endif
-
-err_out:
-	RT28XX_PUT_DEVICE(dev_p);
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-	return (LONG)NULL;
-#else
-    return -ENODEV; /* probe fail */
-#endif // LINUX_VERSION_CODE //
-} /* End of rt28xx_probe */
-
-
-/*
-========================================================================
-Routine Description:
-    The entry point for Linux kernel sent packet to our driver.
-
-Arguments:
-    sk_buff *skb		the pointer refer to a sk_buffer.
-
-Return Value:
-    0
-
-Note:
-	This function is the entry point of Tx Path for Os delivery packet to
-	our driver. You only can put OS-depened & STA/AP common handle procedures
-	in here.
-========================================================================
-*/
-int rt28xx_packet_xmit(struct sk_buff *skb)
-{
-	struct net_device *net_dev = skb->dev;
-	PRTMP_ADAPTER pAd = net_dev->ml_priv;
-	int status = 0;
-	PNDIS_PACKET pPacket = (PNDIS_PACKET) skb;
-
-	/* RT2870STA does this in RTMPSendPackets() */
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-	{
-		RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_RESOURCES);
-		return 0;
-	}
-#endif // RALINK_ATE //
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// Drop send request since we are in monitor mode
-		if (MONITOR_ON(pAd))
-		{
-			RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
-			goto done;
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-        // EapolStart size is 18
-	if (skb->len < 14)
-	{
-		//printk("bad packet size: %d\n", pkt->len);
-		hex_dump("bad packet", skb->data, skb->len);
-		RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
-		goto done;
-	}
-
-	RTMP_SET_PACKET_5VT(pPacket, 0);
-//	MiniportMMRequest(pAd, pkt->data, pkt->len);
-#ifdef CONFIG_5VT_ENHANCE
-    if (*(int*)(skb->cb) == BRIDGE_TAG) {
-		RTMP_SET_PACKET_5VT(pPacket, 1);
-    }
-#endif
-
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-
-		STASendPackets((NDIS_HANDLE)pAd, (PPNDIS_PACKET) &pPacket, 1);
-	}
-
-#endif // CONFIG_STA_SUPPORT //
-
-	status = 0;
-done:
-
-	return status;
-}
-
-
-/*
-========================================================================
-Routine Description:
-    Send a packet to WLAN.
-
-Arguments:
-    skb_p           points to our adapter
-    dev_p           which WLAN network interface
-
-Return Value:
-    0: transmit successfully
-    otherwise: transmit fail
-
-Note:
-========================================================================
-*/
-INT rt28xx_send_packets(
-	IN struct sk_buff 		*skb_p,
-	IN struct net_device 	*net_dev)
-{
-    RTMP_ADAPTER *pAd = net_dev->ml_priv;
-
-	if (!(net_dev->flags & IFF_UP))
-	{
-		RELEASE_NDIS_PACKET(pAd, (PNDIS_PACKET)skb_p, NDIS_STATUS_FAILURE);
-		return 0;
-	}
-
-	NdisZeroMemory((PUCHAR)&skb_p->cb[CB_OFF], 15);
-	RTMP_SET_PACKET_NET_DEVICE_MBSSID(skb_p, MAIN_MBSSID);
-
-	return rt28xx_packet_xmit(skb_p);
-} /* End of MBSS_VirtualIF_PacketSend */
-
-
-
-
-#if LINUX_VERSION_CODE <= 0x20402	// Red Hat 7.1
-//static struct net_device *alloc_netdev(int sizeof_priv, const char *mask, void (*setup)(struct net_device *)) //sample
-struct net_device *alloc_netdev(
-	int sizeof_priv,
-	const char *mask,
-	void (*setup)(struct net_device *))
-{
-    struct net_device	*dev;
-    INT					alloc_size;
-
-
-    /* ensure 32-byte alignment of the private area */
-    alloc_size = sizeof (*dev) + sizeof_priv + 31;
-
-    dev = (struct net_device *) kmalloc(alloc_size, GFP_KERNEL);
-    if (dev == NULL)
-    {
-        DBGPRINT(RT_DEBUG_ERROR,
-				("alloc_netdev: Unable to allocate device memory.\n"));
-        return NULL;
-    }
-
-    memset(dev, 0, alloc_size);
-
-    if (sizeof_priv)
-        dev->ml_priv = (void *) (((long)(dev + 1) + 31) & ~31);
-
-    setup(dev);
-    strcpy(dev->name, mask);
-
-    return dev;
-}
-#endif // LINUX_VERSION_CODE //
-
-
-void CfgInitHook(PRTMP_ADAPTER pAd)
-{
-	pAd->bBroadComHT = TRUE;
-} /* End of CfgInitHook */
-
-
-#if WIRELESS_EXT >= 12
-// This function will be called when query /proc
-struct iw_statistics *rt28xx_get_wireless_stats(
-    IN struct net_device *net_dev)
-{
-	PRTMP_ADAPTER pAd = net_dev->ml_priv;
-
-
-	DBGPRINT(RT_DEBUG_TRACE, ("rt28xx_get_wireless_stats --->\n"));
-
-	pAd->iw_stats.status = 0; // Status - device dependent for now
-
-	// link quality
-	pAd->iw_stats.qual.qual = ((pAd->Mlme.ChannelQuality * 12)/10 + 10);
-	if(pAd->iw_stats.qual.qual > 100)
-		pAd->iw_stats.qual.qual = 100;
-
-#ifdef CONFIG_STA_SUPPORT
-	if (pAd->OpMode == OPMODE_STA)
-		pAd->iw_stats.qual.level = RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.LastRssi0, pAd->StaCfg.RssiSample.LastRssi1, pAd->StaCfg.RssiSample.LastRssi2);
-#endif // CONFIG_STA_SUPPORT //
-
-	pAd->iw_stats.qual.noise = pAd->BbpWriteLatch[66]; // noise level (dBm)
-
-	pAd->iw_stats.qual.noise += 256 - 143;
-	pAd->iw_stats.qual.updated = 1;     // Flags to know if updated
-#ifdef IW_QUAL_DBM
-	pAd->iw_stats.qual.updated |= IW_QUAL_DBM;	// Level + Noise are dBm
-#endif // IW_QUAL_DBM //
-
-	pAd->iw_stats.discard.nwid = 0;     // Rx : Wrong nwid/essid
-	pAd->iw_stats.miss.beacon = 0;      // Missed beacons/superframe
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<--- rt28xx_get_wireless_stats\n"));
-	return &pAd->iw_stats;
-} /* End of rt28xx_get_wireless_stats */
-#endif // WIRELESS_EXT //
-
-
-
-void tbtt_tasklet(unsigned long data)
-{
-#define MAX_TX_IN_TBTT		(16)
-
-}
-
-INT rt28xx_ioctl(
-	IN	struct net_device	*net_dev,
-	IN	OUT	struct ifreq	*rq,
-	IN	INT					cmd)
-{
-	VIRTUAL_ADAPTER	*pVirtualAd = NULL;
-	RTMP_ADAPTER	*pAd = NULL;
-	INT				ret = 0;
-
-	if (net_dev->priv_flags == INT_MAIN)
-	{
-		pAd = net_dev->ml_priv;
-	}
-	else
-	{
-		pVirtualAd = net_dev->ml_priv;
-		pAd = pVirtualAd->RtmpDev->ml_priv;
-	}
-
-	if (pAd == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->ml_priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		ret = rt28xx_sta_ioctl(net_dev, rq, cmd);
-	}
-#endif // CONFIG_STA_SUPPORT //
-
-	return ret;
-}
-
-/*
-    ========================================================================
-
-    Routine Description:
-        return ethernet statistics counter
-
-    Arguments:
-        net_dev                     Pointer to net_device
-
-    Return Value:
-        net_device_stats*
-
-    Note:
-
-    ========================================================================
-*/
-struct net_device_stats *RT28xx_get_ether_stats(
-    IN  struct net_device *net_dev)
-{
-    RTMP_ADAPTER *pAd = NULL;
-
-	if (net_dev)
-		pAd = net_dev->ml_priv;
-
-	if (pAd)
-	{
-
-		pAd->stats.rx_packets = pAd->WlanCounters.ReceivedFragmentCount.QuadPart;
-		pAd->stats.tx_packets = pAd->WlanCounters.TransmittedFragmentCount.QuadPart;
-
-		pAd->stats.rx_bytes = pAd->RalinkCounters.ReceivedByteCount;
-		pAd->stats.tx_bytes = pAd->RalinkCounters.TransmittedByteCount;
-
-		pAd->stats.rx_errors = pAd->Counters8023.RxErrors;
-		pAd->stats.tx_errors = pAd->Counters8023.TxErrors;
-
-		pAd->stats.rx_dropped = 0;
-		pAd->stats.tx_dropped = 0;
-
-	    pAd->stats.multicast = pAd->WlanCounters.MulticastReceivedFrameCount.QuadPart;   // multicast packets received
-	    pAd->stats.collisions = pAd->Counters8023.OneCollision + pAd->Counters8023.MoreCollisions;  // Collision packets
-
-	    pAd->stats.rx_length_errors = 0;
-	    pAd->stats.rx_over_errors = pAd->Counters8023.RxNoBuffer;                   // receiver ring buff overflow
-	    pAd->stats.rx_crc_errors = 0;//pAd->WlanCounters.FCSErrorCount;     // recved pkt with crc error
-	    pAd->stats.rx_frame_errors = pAd->Counters8023.RcvAlignmentErrors;          // recv'd frame alignment error
-	    pAd->stats.rx_fifo_errors = pAd->Counters8023.RxNoBuffer;                   // recv'r fifo overrun
-	    pAd->stats.rx_missed_errors = 0;                                            // receiver missed packet
-
-	    // detailed tx_errors
-	    pAd->stats.tx_aborted_errors = 0;
-	    pAd->stats.tx_carrier_errors = 0;
-	    pAd->stats.tx_fifo_errors = 0;
-	    pAd->stats.tx_heartbeat_errors = 0;
-	    pAd->stats.tx_window_errors = 0;
-
-	    // for cslip etc
-	    pAd->stats.rx_compressed = 0;
-	    pAd->stats.tx_compressed = 0;
-
-		return &pAd->stats;
-	}
-	else
-    	return NULL;
-}
-
+#include "../rt2870/rt_main_dev.c"
diff --git a/drivers/staging/rt3070/rt_profile.c b/drivers/staging/rt3070/rt_profile.c
index 6eda27e6b8d..ab9eb1d55bb 100644
--- a/drivers/staging/rt3070/rt_profile.c
+++ b/drivers/staging/rt3070/rt_profile.c
@@ -1,2041 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-#include "rt_config.h"
-
-#ifdef DOT11_N_SUPPORT
-static void HTParametersHook(
-	IN	PRTMP_ADAPTER pAd,
-	IN	CHAR		  *pValueStr,
-	IN	CHAR		  *pInput);
-#endif // DOT11_N_SUPPORT //
-
-#define ETH_MAC_ADDR_STR_LEN 17  // in format of xx:xx:xx:xx:xx:xx
-
-// We assume the s1 is a sting, s2 is a memory space with 6 bytes. and content of s1 will be changed.
-BOOLEAN rtstrmactohex(char *s1, char *s2)
-{
-	int i = 0;
-	char *ptokS = s1, *ptokE = s1;
-
-	if (strlen(s1) != ETH_MAC_ADDR_STR_LEN)
-		return FALSE;
-
-	while((*ptokS) != '\0')
-	{
-		if((ptokE = strchr(ptokS, ':')) != NULL)
-			*ptokE++ = '\0';
-		if ((strlen(ptokS) != 2) || (!isxdigit(*ptokS)) || (!isxdigit(*(ptokS+1))))
-			break; // fail
-		AtoH(ptokS, &s2[i++], 1);
-		ptokS = ptokE;
-		if (i == 6)
-			break; // parsing finished
-	}
-
-	return ( i == 6 ? TRUE : FALSE);
-
-}
-
-
-// we assume the s1 and s2 both are strings.
-BOOLEAN rtstrcasecmp(char *s1, char *s2)
-{
-	char *p1 = s1, *p2 = s2;
-
-	if (strlen(s1) != strlen(s2))
-		return FALSE;
-
-	while(*p1 != '\0')
-	{
-		if((*p1 != *p2) && ((*p1 ^ *p2) != 0x20))
-			return FALSE;
-		p1++;
-		p2++;
-	}
-
-	return TRUE;
-}
-
-// we assume the s1 (buffer) and s2 (key) both are strings.
-char * rtstrstruncasecmp(char * s1, char * s2)
-{
-	INT l1, l2, i;
-	char temp1, temp2;
-
-	l2 = strlen(s2);
-	if (!l2)
-		return (char *) s1;
-
-	l1 = strlen(s1);
-
-	while (l1 >= l2)
-	{
-		l1--;
-
-		for(i=0; i<l2; i++)
-		{
-			temp1 = *(s1+i);
-			temp2 = *(s2+i);
-
-			if (('a' <= temp1) && (temp1 <= 'z'))
-				temp1 = 'A'+(temp1-'a');
-			if (('a' <= temp2) && (temp2 <= 'z'))
-				temp2 = 'A'+(temp2-'a');
-
-			if (temp1 != temp2)
-				break;
-		}
-
-		if (i == l2)
-			return (char *) s1;
-
-		s1++;
-	}
-
-	return NULL; // not found
-}
-
-//add by kathy
-
- /**
-  * strstr - Find the first substring in a %NUL terminated string
-  * @s1: The string to be searched
-  * @s2: The string to search for
-  */
-char * rtstrstr(const char * s1,const char * s2)
-{
-	INT l1, l2;
-
-	l2 = strlen(s2);
-	if (!l2)
-		return (char *) s1;
-
-	l1 = strlen(s1);
-
-	while (l1 >= l2)
-	{
-		l1--;
-		if (!memcmp(s1,s2,l2))
-			return (char *) s1;
-		s1++;
-	}
-
-	return NULL;
-}
-
-/**
- * rstrtok - Split a string into tokens
- * @s: The string to be searched
- * @ct: The characters to search for
- * * WARNING: strtok is deprecated, use strsep instead. However strsep is not compatible with old architecture.
- */
-char * __rstrtok;
-char * rstrtok(char * s,const char * ct)
-{
-	char *sbegin, *send;
-
-	sbegin  = s ? s : __rstrtok;
-	if (!sbegin)
-	{
-		return NULL;
-	}
-
-	sbegin += strspn(sbegin,ct);
-	if (*sbegin == '\0')
-	{
-		__rstrtok = NULL;
-		return( NULL );
-	}
-
-	send = strpbrk( sbegin, ct);
-	if (send && *send != '\0')
-		*send++ = '\0';
-
-	__rstrtok = send;
-
-	return (sbegin);
-}
-
-/**
- * delimitcnt - return the count of a given delimiter in a given string.
- * @s: The string to be searched.
- * @ct: The delimiter to search for.
- * Notice : We suppose the delimiter is a single-char string(for example : ";").
- */
-INT delimitcnt(char * s,const char * ct)
-{
-	INT count = 0;
-	/* point to the beginning of the line */
-	const char *token = s;
-
-	for ( ;; )
-	{
-		token = strpbrk(token, ct); /* search for delimiters */
-
-        if ( token == NULL )
-		{
-			/* advanced to the terminating null character */
-			break;
-		}
-		/* skip the delimiter */
-	    ++token;
-
-		/*
-		 * Print the found text: use len with %.*s to specify field width.
-		 */
-
-		/* accumulate delimiter count */
-	    ++count;
-	}
-    return count;
-}
-
-/*
-  * converts the Internet host address from the standard numbers-and-dots notation
-  * into binary data.
-  * returns nonzero if the address is valid, zero if not.
-  */
-int rtinet_aton(const char *cp, unsigned int *addr)
-{
-	unsigned int 	val;
-	int         	base, n;
-	char        	c;
-	unsigned int    parts[4];
-	unsigned int    *pp = parts;
-
-	for (;;)
-    {
-         /*
-          * Collect number up to ``.''.
-          * Values are specified as for C:
-          *	0x=hex, 0=octal, other=decimal.
-          */
-         val = 0;
-         base = 10;
-         if (*cp == '0')
-         {
-             if (*++cp == 'x' || *cp == 'X')
-                 base = 16, cp++;
-             else
-                 base = 8;
-         }
-         while ((c = *cp) != '\0')
-         {
-             if (isdigit((unsigned char) c))
-             {
-                 val = (val * base) + (c - '0');
-                 cp++;
-                 continue;
-             }
-             if (base == 16 && isxdigit((unsigned char) c))
-             {
-                 val = (val << 4) +
-                     (c + 10 - (islower((unsigned char) c) ? 'a' : 'A'));
-                 cp++;
-                 continue;
-             }
-             break;
-         }
-         if (*cp == '.')
-         {
-             /*
-              * Internet format: a.b.c.d a.b.c   (with c treated as 16-bits)
-              * a.b     (with b treated as 24 bits)
-              */
-             if (pp >= parts + 3 || val > 0xff)
-                 return 0;
-             *pp++ = val, cp++;
-         }
-         else
-             break;
-     }
-
-     /*
-      * Check for trailing junk.
-      */
-     while (*cp)
-         if (!isspace((unsigned char) *cp++))
-             return 0;
-
-     /*
-      * Concoct the address according to the number of parts specified.
-      */
-     n = pp - parts + 1;
-     switch (n)
-     {
-
-         case 1:         /* a -- 32 bits */
-             break;
-
-         case 2:         /* a.b -- 8.24 bits */
-             if (val > 0xffffff)
-                 return 0;
-             val |= parts[0] << 24;
-             break;
-
-         case 3:         /* a.b.c -- 8.8.16 bits */
-             if (val > 0xffff)
-                 return 0;
-             val |= (parts[0] << 24) | (parts[1] << 16);
-             break;
-
-         case 4:         /* a.b.c.d -- 8.8.8.8 bits */
-             if (val > 0xff)
-                 return 0;
-             val |= (parts[0] << 24) | (parts[1] << 16) | (parts[2] << 8);
-             break;
-     }
-
-     *addr = htonl(val);
-     return 1;
-
-}
-
-/*
-    ========================================================================
-
-    Routine Description:
-        Find key section for Get key parameter.
-
-    Arguments:
-        buffer                      Pointer to the buffer to start find the key section
-        section                     the key of the secion to be find
-
-    Return Value:
-        NULL                        Fail
-        Others                      Success
-    ========================================================================
-*/
-PUCHAR  RTMPFindSection(
-    IN  PCHAR   buffer)
-{
-    CHAR temp_buf[32];
-    PUCHAR  ptr;
-
-    strcpy(temp_buf, "Default");
-
-    if((ptr = rtstrstr(buffer, temp_buf)) != NULL)
-            return (ptr+strlen("\n"));
-        else
-            return NULL;
-}
-
-/*
-    ========================================================================
-
-    Routine Description:
-        Get key parameter.
-
-    Arguments:
-        key                         Pointer to key string
-        dest                        Pointer to destination
-        destsize                    The datasize of the destination
-        buffer                      Pointer to the buffer to start find the key
-
-    Return Value:
-        TRUE                        Success
-        FALSE                       Fail
-
-    Note:
-        This routine get the value with the matched key (case case-sensitive)
-    ========================================================================
-*/
-INT RTMPGetKeyParameter(
-    IN  PCHAR   key,
-    OUT PCHAR   dest,
-    IN  INT     destsize,
-    IN  PCHAR   buffer)
-{
-    UCHAR *temp_buf1 = NULL;
-    UCHAR *temp_buf2 = NULL;
-    CHAR *start_ptr;
-    CHAR *end_ptr;
-    CHAR *ptr;
-    CHAR *offset = 0;
-    INT  len;
-
-	//temp_buf1 = kmalloc(MAX_PARAM_BUFFER_SIZE, MEM_ALLOC_FLAG);
-	os_alloc_mem(NULL, &temp_buf1, MAX_PARAM_BUFFER_SIZE);
-
-	if(temp_buf1 == NULL)
-        return (FALSE);
-
-	//temp_buf2 = kmalloc(MAX_PARAM_BUFFER_SIZE, MEM_ALLOC_FLAG);
-	os_alloc_mem(NULL, &temp_buf2, MAX_PARAM_BUFFER_SIZE);
-	if(temp_buf2 == NULL)
-	{
-		os_free_mem(NULL, temp_buf1);
-        return (FALSE);
-	}
-
-    //find section
-    if((offset = RTMPFindSection(buffer)) == NULL)
-    {
-    	os_free_mem(NULL, temp_buf1);
-    	os_free_mem(NULL, temp_buf2);
-        return (FALSE);
-    }
-
-    strcpy(temp_buf1, "\n");
-    strcat(temp_buf1, key);
-    strcat(temp_buf1, "=");
-
-    //search key
-    if((start_ptr=rtstrstr(offset, temp_buf1))==NULL)
-    {
-		os_free_mem(NULL, temp_buf1);
-    	os_free_mem(NULL, temp_buf2);
-        return (FALSE);
-    }
-
-    start_ptr+=strlen("\n");
-    if((end_ptr=rtstrstr(start_ptr, "\n"))==NULL)
-       end_ptr=start_ptr+strlen(start_ptr);
-
-    if (end_ptr<start_ptr)
-    {
-		os_free_mem(NULL, temp_buf1);
-    	os_free_mem(NULL, temp_buf2);
-        return (FALSE);
-    }
-
-    NdisMoveMemory(temp_buf2, start_ptr, end_ptr-start_ptr);
-    temp_buf2[end_ptr-start_ptr]='\0';
-    len = strlen(temp_buf2);
-    strcpy(temp_buf1, temp_buf2);
-    if((start_ptr=rtstrstr(temp_buf1, "=")) == NULL)
-    {
-		os_free_mem(NULL, temp_buf1);
-    	os_free_mem(NULL, temp_buf2);
-        return (FALSE);
-    }
-
-    strcpy(temp_buf2, start_ptr+1);
-    ptr = temp_buf2;
-    //trim space or tab
-    while(*ptr != 0x00)
-    {
-        if( (*ptr == ' ') || (*ptr == '\t') )
-            ptr++;
-        else
-           break;
-    }
-
-    len = strlen(ptr);
-    memset(dest, 0x00, destsize);
-    strncpy(dest, ptr, len >= destsize ?  destsize: len);
-
-	os_free_mem(NULL, temp_buf1);
-    os_free_mem(NULL, temp_buf2);
-    return TRUE;
-}
-
-/*
-    ========================================================================
-
-    Routine Description:
-        Get key parameter.
-
-    Arguments:
-        key                         Pointer to key string
-        dest                        Pointer to destination
-        destsize                    The datasize of the destination
-        buffer                      Pointer to the buffer to start find the key
-
-    Return Value:
-        TRUE                        Success
-        FALSE                       Fail
-
-    Note:
-        This routine get the value with the matched key (case case-sensitive).
-        It is called for parsing SSID and any key string.
-    ========================================================================
-*/
-INT RTMPGetCriticalParameter(
-    IN  PCHAR   key,
-    OUT PCHAR   dest,
-    IN  INT     destsize,
-    IN  PCHAR   buffer)
-{
-    UCHAR *temp_buf1 = NULL;
-    UCHAR *temp_buf2 = NULL;
-    CHAR *start_ptr;
-    CHAR *end_ptr;
-    CHAR *ptr;
-    CHAR *offset = 0;
-    INT  len;
-
-	//temp_buf1 = kmalloc(MAX_PARAM_BUFFER_SIZE, MEM_ALLOC_FLAG);
-	os_alloc_mem(NULL, &temp_buf1, MAX_PARAM_BUFFER_SIZE);
-
-	if(temp_buf1 == NULL)
-        return (FALSE);
-
-	//temp_buf2 = kmalloc(MAX_PARAM_BUFFER_SIZE, MEM_ALLOC_FLAG);
-	os_alloc_mem(NULL, &temp_buf2, MAX_PARAM_BUFFER_SIZE);
-	if(temp_buf2 == NULL)
-	{
-		os_free_mem(NULL, temp_buf1);
-        return (FALSE);
-	}
-
-    //find section
-    if((offset = RTMPFindSection(buffer)) == NULL)
-    {
-    	os_free_mem(NULL, temp_buf1);
-    	os_free_mem(NULL, temp_buf2);
-        return (FALSE);
-    }
-
-    strcpy(temp_buf1, "\n");
-    strcat(temp_buf1, key);
-    strcat(temp_buf1, "=");
-
-    //search key
-    if((start_ptr=rtstrstr(offset, temp_buf1))==NULL)
-    {
-		os_free_mem(NULL, temp_buf1);
-    	os_free_mem(NULL, temp_buf2);
-        return (FALSE);
-    }
-
-    start_ptr+=strlen("\n");
-    if((end_ptr=rtstrstr(start_ptr, "\n"))==NULL)
-       end_ptr=start_ptr+strlen(start_ptr);
-
-    if (end_ptr<start_ptr)
-    {
-		os_free_mem(NULL, temp_buf1);
-    	os_free_mem(NULL, temp_buf2);
-        return (FALSE);
-    }
-
-    NdisMoveMemory(temp_buf2, start_ptr, end_ptr-start_ptr);
-    temp_buf2[end_ptr-start_ptr]='\0';
-    len = strlen(temp_buf2);
-    strcpy(temp_buf1, temp_buf2);
-    if((start_ptr=rtstrstr(temp_buf1, "=")) == NULL)
-    {
-		os_free_mem(NULL, temp_buf1);
-    	os_free_mem(NULL, temp_buf2);
-        return (FALSE);
-    }
-
-    strcpy(temp_buf2, start_ptr+1);
-    ptr = temp_buf2;
-
-    //trim tab
-    /* We cannot trim space(' ') for SSID and key string. */
-    while(*ptr != 0x00)
-    {
-        //if( (*ptr == ' ') || (*ptr == '\t') )
-        if( (*ptr == '\t') )
-            ptr++;
-        else
-           break;
-    }
-
-    len = strlen(ptr);
-    memset(dest, 0x00, destsize);
-    strncpy(dest, ptr, len >= destsize ?  destsize: len);
-
-	os_free_mem(NULL, temp_buf1);
-    os_free_mem(NULL, temp_buf2);
-    return TRUE;
-}
-
-/*
-    ========================================================================
-
-    Routine Description:
-        Get multiple key parameter.
-
-    Arguments:
-        key                         Pointer to key string
-        dest                        Pointer to destination
-        destsize                    The datasize of the destination
-        buffer                      Pointer to the buffer to start find the key
-
-    Return Value:
-        TRUE                        Success
-        FALSE                       Fail
-
-    Note:
-        This routine get the value with the matched key (case case-sensitive)
-    ========================================================================
-*/
-INT RTMPGetKeyParameterWithOffset(
-    IN  PCHAR   key,
-    OUT PCHAR   dest,
-    OUT	USHORT	*end_offset,
-    IN  INT     destsize,
-    IN  PCHAR   buffer,
-    IN	BOOLEAN	bTrimSpace)
-{
-    UCHAR *temp_buf1 = NULL;
-    UCHAR *temp_buf2 = NULL;
-    CHAR *start_ptr;
-    CHAR *end_ptr;
-    CHAR *ptr;
-    CHAR *offset = 0;
-    INT  len;
-
-	if (*end_offset >= MAX_INI_BUFFER_SIZE)
-		return (FALSE);
-
-	os_alloc_mem(NULL, &temp_buf1, MAX_PARAM_BUFFER_SIZE);
-
-	if(temp_buf1 == NULL)
-        return (FALSE);
-
-	os_alloc_mem(NULL, &temp_buf2, MAX_PARAM_BUFFER_SIZE);
-	if(temp_buf2 == NULL)
-	{
-		os_free_mem(NULL, temp_buf1);
-        return (FALSE);
-	}
-
-    //find section
-	if(*end_offset == 0)
-    {
-		if ((offset = RTMPFindSection(buffer)) == NULL)
-		{
-			os_free_mem(NULL, temp_buf1);
-	    	os_free_mem(NULL, temp_buf2);
-    	    return (FALSE);
-		}
-    }
-	else
-		offset = buffer + (*end_offset);
-
-    strcpy(temp_buf1, "\n");
-    strcat(temp_buf1, key);
-    strcat(temp_buf1, "=");
-
-    //search key
-    if((start_ptr=rtstrstr(offset, temp_buf1))==NULL)
-    {
-		os_free_mem(NULL, temp_buf1);
-    	os_free_mem(NULL, temp_buf2);
-        return (FALSE);
-    }
-
-    start_ptr+=strlen("\n");
-    if((end_ptr=rtstrstr(start_ptr, "\n"))==NULL)
-       end_ptr=start_ptr+strlen(start_ptr);
-
-    if (end_ptr<start_ptr)
-    {
-		os_free_mem(NULL, temp_buf1);
-    	os_free_mem(NULL, temp_buf2);
-        return (FALSE);
-    }
-
-	*end_offset = end_ptr - buffer;
-
-    NdisMoveMemory(temp_buf2, start_ptr, end_ptr-start_ptr);
-    temp_buf2[end_ptr-start_ptr]='\0';
-    len = strlen(temp_buf2);
-    strcpy(temp_buf1, temp_buf2);
-    if((start_ptr=rtstrstr(temp_buf1, "=")) == NULL)
-    {
-		os_free_mem(NULL, temp_buf1);
-    	os_free_mem(NULL, temp_buf2);
-        return (FALSE);
-    }
-
-    strcpy(temp_buf2, start_ptr+1);
-    ptr = temp_buf2;
-    //trim space or tab
-    while(*ptr != 0x00)
-    {
-        if((bTrimSpace && (*ptr == ' ')) || (*ptr == '\t') )
-            ptr++;
-        else
-           break;
-    }
-
-    len = strlen(ptr);
-    memset(dest, 0x00, destsize);
-    strncpy(dest, ptr, len >= destsize ?  destsize: len);
-
-	os_free_mem(NULL, temp_buf1);
-    os_free_mem(NULL, temp_buf2);
-    return TRUE;
-}
-
-
-static int rtmp_parse_key_buffer_from_file(IN  PRTMP_ADAPTER pAd,IN  char *buffer,IN  ULONG KeyType,IN  INT BSSIdx,IN  INT KeyIdx)
-{
-	PUCHAR		keybuff;
-	INT			i = BSSIdx, idx = KeyIdx;
-	ULONG		KeyLen;
-	UCHAR		CipherAlg = CIPHER_WEP64;
-
-	keybuff = buffer;
-	KeyLen = strlen(keybuff);
-
-	if (KeyType == 1)
-	{//Ascii
-		if( (KeyLen == 5) || (KeyLen == 13))
-		{
-			pAd->SharedKey[i][idx].KeyLen = KeyLen;
-			NdisMoveMemory(pAd->SharedKey[i][idx].Key, keybuff, KeyLen);
-			if (KeyLen == 5)
-				CipherAlg = CIPHER_WEP64;
-			else
-				CipherAlg = CIPHER_WEP128;
-			pAd->SharedKey[i][idx].CipherAlg = CipherAlg;
-
-			DBGPRINT(RT_DEBUG_TRACE, ("I/F(ra%d) Key%dStr=%s and type=%s\n", i, idx+1, keybuff, (KeyType == 0) ? "Hex":"Ascii"));
-			return 1;
-		}
-		else
-		{//Invalid key length
-			DBGPRINT(RT_DEBUG_ERROR, ("Key%dStr is Invalid key length! KeyLen = %ld!\n", idx+1, KeyLen));
-			return 0;
-		}
-	}
-	else
-	{//Hex type
-		if( (KeyLen == 10) || (KeyLen == 26))
-		{
-			pAd->SharedKey[i][idx].KeyLen = KeyLen / 2;
-			AtoH(keybuff, pAd->SharedKey[i][idx].Key, KeyLen / 2);
-			if (KeyLen == 10)
-				CipherAlg = CIPHER_WEP64;
-			else
-				CipherAlg = CIPHER_WEP128;
-			pAd->SharedKey[i][idx].CipherAlg = CipherAlg;
-
-			DBGPRINT(RT_DEBUG_TRACE, ("I/F(ra%d) Key%dStr=%s and type=%s\n", i, idx+1, keybuff, (KeyType == 0) ? "Hex":"Ascii"));
-			return 1;
-		}
-		else
-		{//Invalid key length
-			DBGPRINT(RT_DEBUG_ERROR, ("I/F(ra%d) Key%dStr is Invalid key length! KeyLen = %ld!\n", i, idx+1, KeyLen));
-			return 0;
-		}
-	}
-}
-static void rtmp_read_key_parms_from_file(IN  PRTMP_ADAPTER pAd, char *tmpbuf, char *buffer)
-{
-	char		tok_str[16];
-	PUCHAR		macptr;
-	INT			i = 0, idx;
-	ULONG		KeyType[MAX_MBSSID_NUM];
-	ULONG		KeyIdx;
-
-	NdisZeroMemory(KeyType, MAX_MBSSID_NUM);
-
-	//DefaultKeyID
-	if(RTMPGetKeyParameter("DefaultKeyID", tmpbuf, 25, buffer))
-	{
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			KeyIdx = simple_strtol(tmpbuf, 0, 10);
-			if((KeyIdx >= 1 ) && (KeyIdx <= 4))
-				pAd->StaCfg.DefaultKeyId = (UCHAR) (KeyIdx - 1);
-			else
-				pAd->StaCfg.DefaultKeyId = 0;
-
-			DBGPRINT(RT_DEBUG_TRACE, ("DefaultKeyID(0~3)=%d\n", pAd->StaCfg.DefaultKeyId));
-		}
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-
-	for (idx = 0; idx < 4; idx++)
-	{
-		sprintf(tok_str, "Key%dType", idx + 1);
-		//Key1Type
-		if (RTMPGetKeyParameter(tok_str, tmpbuf, 128, buffer))
-		{
-		    for (i = 0, macptr = rstrtok(tmpbuf,";"); macptr; macptr = rstrtok(NULL,";"), i++)
-		    {
-			    KeyType[i] = simple_strtol(macptr, 0, 10);
-		    }
-
-#ifdef CONFIG_STA_SUPPORT
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			{
-				sprintf(tok_str, "Key%dStr", idx + 1);
-				if (RTMPGetCriticalParameter(tok_str, tmpbuf, 128, buffer))
-				{
-					rtmp_parse_key_buffer_from_file(pAd, tmpbuf, KeyType[BSS0], BSS0, idx);
-				}
-			}
-#endif // CONFIG_STA_SUPPORT //
-		}
-	}
-}
-
-
-#ifdef CONFIG_STA_SUPPORT
-static void rtmp_read_sta_wmm_parms_from_file(IN  PRTMP_ADAPTER pAd, char *tmpbuf, char *buffer)
-{
-	PUCHAR					macptr;
-	INT						i=0;
-	BOOLEAN					bWmmEnable = FALSE;
-
-	//WmmCapable
-	if(RTMPGetKeyParameter("WmmCapable", tmpbuf, 32, buffer))
-	{
-		if(simple_strtol(tmpbuf, 0, 10) != 0) //Enable
-		{
-			pAd->CommonCfg.bWmmCapable = TRUE;
-			bWmmEnable = TRUE;
-		}
-		else //Disable
-		{
-			pAd->CommonCfg.bWmmCapable = FALSE;
-		}
-
-		DBGPRINT(RT_DEBUG_TRACE, ("WmmCapable=%d\n", pAd->CommonCfg.bWmmCapable));
-	}
-
-#ifdef QOS_DLS_SUPPORT
-	//DLSCapable
-	if(RTMPGetKeyParameter("DLSCapable", tmpbuf, 32, buffer))
-	{
-		if(simple_strtol(tmpbuf, 0, 10) != 0)  //Enable
-		{
-			pAd->CommonCfg.bDLSCapable = TRUE;
-		}
-		else //Disable
-		{
-			pAd->CommonCfg.bDLSCapable = FALSE;
-		}
-
-		DBGPRINT(RT_DEBUG_TRACE, ("bDLSCapable=%d\n", pAd->CommonCfg.bDLSCapable));
-	}
-#endif // QOS_DLS_SUPPORT //
-
-	//AckPolicy for AC_BK, AC_BE, AC_VI, AC_VO
-	if(RTMPGetKeyParameter("AckPolicy", tmpbuf, 32, buffer))
-	{
-		for (i = 0, macptr = rstrtok(tmpbuf,";"); macptr; macptr = rstrtok(NULL,";"), i++)
-		{
-			pAd->CommonCfg.AckPolicy[i] = (UCHAR)simple_strtol(macptr, 0, 10);
-
-			DBGPRINT(RT_DEBUG_TRACE, ("AckPolicy[%d]=%d\n", i, pAd->CommonCfg.AckPolicy[i]));
-		}
-	}
-
-	if (bWmmEnable)
-	{
-		//APSDCapable
-		if(RTMPGetKeyParameter("APSDCapable", tmpbuf, 10, buffer))
-		{
-			if(simple_strtol(tmpbuf, 0, 10) != 0)  //Enable
-				pAd->CommonCfg.bAPSDCapable = TRUE;
-			else
-				pAd->CommonCfg.bAPSDCapable = FALSE;
-
-			DBGPRINT(RT_DEBUG_TRACE, ("APSDCapable=%d\n", pAd->CommonCfg.bAPSDCapable));
-		}
-
-		//APSDAC for AC_BE, AC_BK, AC_VI, AC_VO
-		if(RTMPGetKeyParameter("APSDAC", tmpbuf, 32, buffer))
-		{
-			BOOLEAN apsd_ac[4];
-
-			for (i = 0, macptr = rstrtok(tmpbuf,";"); macptr; macptr = rstrtok(NULL,";"), i++)
-			{
-				apsd_ac[i] = (BOOLEAN)simple_strtol(macptr, 0, 10);
-
-				DBGPRINT(RT_DEBUG_TRACE, ("APSDAC%d  %d\n", i,  apsd_ac[i]));
-			}
-
-			pAd->CommonCfg.bAPSDAC_BE = apsd_ac[0];
-			pAd->CommonCfg.bAPSDAC_BK = apsd_ac[1];
-			pAd->CommonCfg.bAPSDAC_VI = apsd_ac[2];
-			pAd->CommonCfg.bAPSDAC_VO = apsd_ac[3];
-		}
-	}
-
-}
-#endif // CONFIG_STA_SUPPORT //
-
-
-NDIS_STATUS	RTMPReadParametersHook(
-	IN	PRTMP_ADAPTER pAd)
-{
-	PUCHAR					src = NULL;
-	struct file				*srcf;
-	INT 					retval, orgfsuid, orgfsgid;
-   	mm_segment_t			orgfs;
-	CHAR					*buffer;
-	CHAR					*tmpbuf;
-	ULONG					RtsThresh;
-	ULONG					FragThresh;
-#ifdef CONFIG_STA_SUPPORT
-	UCHAR	                keyMaterial[40];
-#endif // CONFIG_STA_SUPPORT //
-
-
-	PUCHAR					macptr;
-	INT						i = 0;
-
-	buffer = kmalloc(MAX_INI_BUFFER_SIZE, MEM_ALLOC_FLAG);
-	if(buffer == NULL)
-        return NDIS_STATUS_FAILURE;
-
-	tmpbuf = kmalloc(MAX_PARAM_BUFFER_SIZE, MEM_ALLOC_FLAG);
-	if(tmpbuf == NULL)
-	{
-		kfree(buffer);
-        return NDIS_STATUS_FAILURE;
-	}
-
-#ifdef CONFIG_STA_SUPPORT
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		src = STA_PROFILE_PATH;
-#endif // CONFIG_STA_SUPPORT //
-#ifdef MULTIPLE_CARD_SUPPORT
-	src = pAd->MC_FileName;
-#endif // MULTIPLE_CARD_SUPPORT //
-
-	// Save uid and gid used for filesystem access.
-	// Set user and group to 0 (root)
-#if 0
-	orgfsuid = current->fsuid;
-	orgfsgid = current->fsgid;
-	current->fsuid=current->fsgid = 0;
-#endif
-    orgfs = get_fs();
-    set_fs(KERNEL_DS);
-
-	if (src && *src)
-	{
-		srcf = filp_open(src, O_RDONLY, 0);
-		if (IS_ERR(srcf))
-		{
-			DBGPRINT(RT_DEBUG_ERROR, ("--> Error %ld opening %s\n", -PTR_ERR(srcf),src));
-		}
-		else
-		{
-			// The object must have a read method
-			if (srcf->f_op && srcf->f_op->read)
-			{
-				memset(buffer, 0x00, MAX_INI_BUFFER_SIZE);
-				retval=srcf->f_op->read(srcf, buffer, MAX_INI_BUFFER_SIZE, &srcf->f_pos);
-				if (retval < 0)
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("--> Read %s error %d\n", src, -retval));
-				}
-				else
-				{
-					// set file parameter to portcfg
-					//CountryRegion
-					if(RTMPGetKeyParameter("CountryRegion", tmpbuf, 25, buffer))
-					{
-						pAd->CommonCfg.CountryRegion = (UCHAR) simple_strtol(tmpbuf, 0, 10);
-						DBGPRINT(RT_DEBUG_TRACE, ("CountryRegion=%d\n", pAd->CommonCfg.CountryRegion));
-					}
-					//CountryRegionABand
-					if(RTMPGetKeyParameter("CountryRegionABand", tmpbuf, 25, buffer))
-					{
-						pAd->CommonCfg.CountryRegionForABand= (UCHAR) simple_strtol(tmpbuf, 0, 10);
-						DBGPRINT(RT_DEBUG_TRACE, ("CountryRegionABand=%d\n", pAd->CommonCfg.CountryRegionForABand));
-					}
-					//CountryCode
-					if(RTMPGetKeyParameter("CountryCode", tmpbuf, 25, buffer))
-					{
-						NdisMoveMemory(pAd->CommonCfg.CountryCode, tmpbuf , 2);
-#ifdef CONFIG_STA_SUPPORT
-#ifdef EXT_BUILD_CHANNEL_LIST
-						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-							NdisMoveMemory(pAd->StaCfg.StaOriCountryCode, tmpbuf , 2);
-#endif // EXT_BUILD_CHANNEL_LIST //
-#endif // CONFIG_STA_SUPPORT //
-						if (strlen(pAd->CommonCfg.CountryCode) != 0)
-						{
-							pAd->CommonCfg.bCountryFlag = TRUE;
-						}
-						DBGPRINT(RT_DEBUG_TRACE, ("CountryCode=%s\n", pAd->CommonCfg.CountryCode));
-					}
-					//ChannelGeography
-					if(RTMPGetKeyParameter("ChannelGeography", tmpbuf, 25, buffer))
-					{
-						UCHAR Geography = (UCHAR) simple_strtol(tmpbuf, 0, 10);
-						if (Geography <= BOTH)
-						{
-							pAd->CommonCfg.Geography = Geography;
-							pAd->CommonCfg.CountryCode[2] =
-								(pAd->CommonCfg.Geography == BOTH) ? ' ' : ((pAd->CommonCfg.Geography == IDOR) ? 'I' : 'O');
-#ifdef CONFIG_STA_SUPPORT
-#ifdef EXT_BUILD_CHANNEL_LIST
-						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-							pAd->StaCfg.StaOriGeography = pAd->CommonCfg.Geography;
-#endif // EXT_BUILD_CHANNEL_LIST //
-#endif // CONFIG_STA_SUPPORT //
-							DBGPRINT(RT_DEBUG_TRACE, ("ChannelGeography=%d\n", pAd->CommonCfg.Geography));
-						}
-					}
-					else
-					{
-						pAd->CommonCfg.Geography = BOTH;
-						pAd->CommonCfg.CountryCode[2] = ' ';
-					}
-
-
-#ifdef CONFIG_STA_SUPPORT
-					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-					{
-						//SSID
-						if (RTMPGetCriticalParameter("SSID", tmpbuf, 256, buffer))
-						{
-							if (strlen(tmpbuf) <= 32)
-							{
-			 					pAd->CommonCfg.SsidLen = (UCHAR) strlen(tmpbuf);
-								NdisZeroMemory(pAd->CommonCfg.Ssid, NDIS_802_11_LENGTH_SSID);
-								NdisMoveMemory(pAd->CommonCfg.Ssid, tmpbuf, pAd->CommonCfg.SsidLen);
-								pAd->MlmeAux.AutoReconnectSsidLen = pAd->CommonCfg.SsidLen;
-								NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, NDIS_802_11_LENGTH_SSID);
-								NdisMoveMemory(pAd->MlmeAux.AutoReconnectSsid, tmpbuf, pAd->MlmeAux.AutoReconnectSsidLen);
-								pAd->MlmeAux.SsidLen = pAd->CommonCfg.SsidLen;
-								NdisZeroMemory(pAd->MlmeAux.Ssid, NDIS_802_11_LENGTH_SSID);
-								NdisMoveMemory(pAd->MlmeAux.Ssid, tmpbuf, pAd->MlmeAux.SsidLen);
-								DBGPRINT(RT_DEBUG_TRACE, ("%s::(SSID=%s)\n", __FUNCTION__, tmpbuf));
-							}
-						}
-					}
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef CONFIG_STA_SUPPORT
-					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-					{
-						//NetworkType
-						if (RTMPGetKeyParameter("NetworkType", tmpbuf, 25, buffer))
-						{
-							pAd->bConfigChanged = TRUE;
-							if (strcmp(tmpbuf, "Adhoc") == 0)
-								pAd->StaCfg.BssType = BSS_ADHOC;
-							else //Default Infrastructure mode
-								pAd->StaCfg.BssType = BSS_INFRA;
-							// Reset Ralink supplicant to not use, it will be set to start when UI set PMK key
-							pAd->StaCfg.WpaState = SS_NOTUSE;
-							DBGPRINT(RT_DEBUG_TRACE, ("%s::(NetworkType=%d)\n", __FUNCTION__, pAd->StaCfg.BssType));
-						}
-					}
-#endif // CONFIG_STA_SUPPORT //
-					//Channel
-					if(RTMPGetKeyParameter("Channel", tmpbuf, 10, buffer))
-					{
-						pAd->CommonCfg.Channel = (UCHAR) simple_strtol(tmpbuf, 0, 10);
-						DBGPRINT(RT_DEBUG_TRACE, ("Channel=%d\n", pAd->CommonCfg.Channel));
-					}
-					//WirelessMode
-					if(RTMPGetKeyParameter("WirelessMode", tmpbuf, 10, buffer))
-					{
-						int value  = 0, maxPhyMode = PHY_11G;
-
-#ifdef DOT11_N_SUPPORT
-						maxPhyMode = PHY_11N_5G;
-#endif // DOT11_N_SUPPORT //
-
-						value = simple_strtol(tmpbuf, 0, 10);
-
-						if (value <= maxPhyMode)
-						{
-							pAd->CommonCfg.PhyMode = value;
-						}
-						DBGPRINT(RT_DEBUG_TRACE, ("PhyMode=%d\n", pAd->CommonCfg.PhyMode));
-					}
-                    //BasicRate
-					if(RTMPGetKeyParameter("BasicRate", tmpbuf, 10, buffer))
-					{
-						pAd->CommonCfg.BasicRateBitmap = (ULONG) simple_strtol(tmpbuf, 0, 10);
-						DBGPRINT(RT_DEBUG_TRACE, ("BasicRate=%ld\n", pAd->CommonCfg.BasicRateBitmap));
-					}
-					//BeaconPeriod
-					if(RTMPGetKeyParameter("BeaconPeriod", tmpbuf, 10, buffer))
-					{
-						pAd->CommonCfg.BeaconPeriod = (USHORT) simple_strtol(tmpbuf, 0, 10);
-						DBGPRINT(RT_DEBUG_TRACE, ("BeaconPeriod=%d\n", pAd->CommonCfg.BeaconPeriod));
-					}
-                    //TxPower
-					if(RTMPGetKeyParameter("TxPower", tmpbuf, 10, buffer))
-					{
-						pAd->CommonCfg.TxPowerPercentage = (ULONG) simple_strtol(tmpbuf, 0, 10);
-#ifdef CONFIG_STA_SUPPORT
-						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-							pAd->CommonCfg.TxPowerDefault = pAd->CommonCfg.TxPowerPercentage;
-#endif // CONFIG_STA_SUPPORT //
-						DBGPRINT(RT_DEBUG_TRACE, ("TxPower=%ld\n", pAd->CommonCfg.TxPowerPercentage));
-					}
-					//BGProtection
-					if(RTMPGetKeyParameter("BGProtection", tmpbuf, 10, buffer))
-					{
-						switch (simple_strtol(tmpbuf, 0, 10))
-						{
-							case 1: //Always On
-								pAd->CommonCfg.UseBGProtection = 1;
-								break;
-							case 2: //Always OFF
-								pAd->CommonCfg.UseBGProtection = 2;
-								break;
-							case 0: //AUTO
-							default:
-								pAd->CommonCfg.UseBGProtection = 0;
-								break;
-						}
-						DBGPRINT(RT_DEBUG_TRACE, ("BGProtection=%ld\n", pAd->CommonCfg.UseBGProtection));
-					}
-					//OLBCDetection
-					if(RTMPGetKeyParameter("DisableOLBC", tmpbuf, 10, buffer))
-					{
-						switch (simple_strtol(tmpbuf, 0, 10))
-						{
-							case 1: //disable OLBC Detection
-								pAd->CommonCfg.DisableOLBCDetect = 1;
-								break;
-							case 0: //enable OLBC Detection
-								pAd->CommonCfg.DisableOLBCDetect = 0;
-								break;
-							default:
-								pAd->CommonCfg.DisableOLBCDetect= 0;
-								break;
-						}
-						DBGPRINT(RT_DEBUG_TRACE, ("OLBCDetection=%ld\n", pAd->CommonCfg.DisableOLBCDetect));
-					}
-					//TxPreamble
-					if(RTMPGetKeyParameter("TxPreamble", tmpbuf, 10, buffer))
-					{
-						switch (simple_strtol(tmpbuf, 0, 10))
-						{
-							case Rt802_11PreambleShort:
-								pAd->CommonCfg.TxPreamble = Rt802_11PreambleShort;
-								break;
-							case Rt802_11PreambleLong:
-							default:
-								pAd->CommonCfg.TxPreamble = Rt802_11PreambleLong;
-								break;
-						}
-						DBGPRINT(RT_DEBUG_TRACE, ("TxPreamble=%ld\n", pAd->CommonCfg.TxPreamble));
-					}
-					//RTSThreshold
-					if(RTMPGetKeyParameter("RTSThreshold", tmpbuf, 10, buffer))
-					{
-						RtsThresh = simple_strtol(tmpbuf, 0, 10);
-						if( (RtsThresh >= 1) && (RtsThresh <= MAX_RTS_THRESHOLD) )
-							pAd->CommonCfg.RtsThreshold  = (USHORT)RtsThresh;
-						else
-							pAd->CommonCfg.RtsThreshold = MAX_RTS_THRESHOLD;
-
-						DBGPRINT(RT_DEBUG_TRACE, ("RTSThreshold=%d\n", pAd->CommonCfg.RtsThreshold));
-					}
-					//FragThreshold
-					if(RTMPGetKeyParameter("FragThreshold", tmpbuf, 10, buffer))
-					{
-						FragThresh = simple_strtol(tmpbuf, 0, 10);
-						pAd->CommonCfg.bUseZeroToDisableFragment = FALSE;
-
-						if (FragThresh > MAX_FRAG_THRESHOLD || FragThresh < MIN_FRAG_THRESHOLD)
-						{ //illegal FragThresh so we set it to default
-							pAd->CommonCfg.FragmentThreshold = MAX_FRAG_THRESHOLD;
-							pAd->CommonCfg.bUseZeroToDisableFragment = TRUE;
-						}
-						else if (FragThresh % 2 == 1)
-						{
-							// The length of each fragment shall always be an even number of octets, except for the last fragment
-							// of an MSDU or MMPDU, which may be either an even or an odd number of octets.
-							pAd->CommonCfg.FragmentThreshold = (USHORT)(FragThresh - 1);
-						}
-						else
-						{
-							pAd->CommonCfg.FragmentThreshold = (USHORT)FragThresh;
-						}
-						//pAd->CommonCfg.AllowFragSize = (pAd->CommonCfg.FragmentThreshold) - LENGTH_802_11 - LENGTH_CRC;
-						DBGPRINT(RT_DEBUG_TRACE, ("FragThreshold=%d\n", pAd->CommonCfg.FragmentThreshold));
-					}
-					//TxBurst
-					if(RTMPGetKeyParameter("TxBurst", tmpbuf, 10, buffer))
-					{
-//#ifdef WIFI_TEST
-//						pAd->CommonCfg.bEnableTxBurst = FALSE;
-//#else
-						if(simple_strtol(tmpbuf, 0, 10) != 0)  //Enable
-							pAd->CommonCfg.bEnableTxBurst = TRUE;
-						else //Disable
-							pAd->CommonCfg.bEnableTxBurst = FALSE;
-//#endif
-						DBGPRINT(RT_DEBUG_TRACE, ("TxBurst=%d\n", pAd->CommonCfg.bEnableTxBurst));
-					}
-
-#ifdef AGGREGATION_SUPPORT
-					//PktAggregate
-					if(RTMPGetKeyParameter("PktAggregate", tmpbuf, 10, buffer))
-					{
-						if(simple_strtol(tmpbuf, 0, 10) != 0)  //Enable
-							pAd->CommonCfg.bAggregationCapable = TRUE;
-						else //Disable
-							pAd->CommonCfg.bAggregationCapable = FALSE;
-#ifdef PIGGYBACK_SUPPORT
-						pAd->CommonCfg.bPiggyBackCapable = pAd->CommonCfg.bAggregationCapable;
-#endif // PIGGYBACK_SUPPORT //
-						DBGPRINT(RT_DEBUG_TRACE, ("PktAggregate=%d\n", pAd->CommonCfg.bAggregationCapable));
-					}
-#else
-					pAd->CommonCfg.bAggregationCapable = FALSE;
-					pAd->CommonCfg.bPiggyBackCapable = FALSE;
-#endif // AGGREGATION_SUPPORT //
-
-					// WmmCapable
-
-#ifdef CONFIG_STA_SUPPORT
-					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-						rtmp_read_sta_wmm_parms_from_file(pAd, tmpbuf, buffer);
-#endif // CONFIG_STA_SUPPORT //
-
-					//ShortSlot
-					if(RTMPGetKeyParameter("ShortSlot", tmpbuf, 10, buffer))
-					{
-						if(simple_strtol(tmpbuf, 0, 10) != 0)  //Enable
-							pAd->CommonCfg.bUseShortSlotTime = TRUE;
-						else //Disable
-							pAd->CommonCfg.bUseShortSlotTime = FALSE;
-
-						DBGPRINT(RT_DEBUG_TRACE, ("ShortSlot=%d\n", pAd->CommonCfg.bUseShortSlotTime));
-					}
-					//IEEE80211H
-					if(RTMPGetKeyParameter("IEEE80211H", tmpbuf, 10, buffer))
-					{
-					    for (i = 0, macptr = rstrtok(tmpbuf,";"); macptr; macptr = rstrtok(NULL,";"), i++)
-					    {
-    						if(simple_strtol(macptr, 0, 10) != 0)  //Enable
-    							pAd->CommonCfg.bIEEE80211H = TRUE;
-    						else //Disable
-    							pAd->CommonCfg.bIEEE80211H = FALSE;
-
-    						DBGPRINT(RT_DEBUG_TRACE, ("IEEE80211H=%d\n", pAd->CommonCfg.bIEEE80211H));
-					    }
-					}
-					//CSPeriod
-					if(RTMPGetKeyParameter("CSPeriod", tmpbuf, 10, buffer))
-					{
-					    if(simple_strtol(tmpbuf, 0, 10) != 0)
-							pAd->CommonCfg.RadarDetect.CSPeriod = simple_strtol(tmpbuf, 0, 10);
-						else
-							pAd->CommonCfg.RadarDetect.CSPeriod = 0;
-
-   						DBGPRINT(RT_DEBUG_TRACE, ("CSPeriod=%d\n", pAd->CommonCfg.RadarDetect.CSPeriod));
-					}
-
-					//RDRegion
-					if(RTMPGetKeyParameter("RDRegion", tmpbuf, 128, buffer))
-					{
-						if ((strncmp(tmpbuf, "JAP_W53", 7) == 0) || (strncmp(tmpbuf, "jap_w53", 7) == 0))
-						{
-							pAd->CommonCfg.RadarDetect.RDDurRegion = JAP_W53;
-							pAd->CommonCfg.RadarDetect.DfsSessionTime = 15;
-						}
-						else if ((strncmp(tmpbuf, "JAP_W56", 7) == 0) || (strncmp(tmpbuf, "jap_w56", 7) == 0))
-						{
-							pAd->CommonCfg.RadarDetect.RDDurRegion = JAP_W56;
-							pAd->CommonCfg.RadarDetect.DfsSessionTime = 13;
-						}
-						else if ((strncmp(tmpbuf, "JAP", 3) == 0) || (strncmp(tmpbuf, "jap", 3) == 0))
-						{
-							pAd->CommonCfg.RadarDetect.RDDurRegion = JAP;
-							pAd->CommonCfg.RadarDetect.DfsSessionTime = 5;
-						}
-						else  if ((strncmp(tmpbuf, "FCC", 3) == 0) || (strncmp(tmpbuf, "fcc", 3) == 0))
-						{
-							pAd->CommonCfg.RadarDetect.RDDurRegion = FCC;
-							pAd->CommonCfg.RadarDetect.DfsSessionTime = 5;
-						}
-						else if ((strncmp(tmpbuf, "CE", 2) == 0) || (strncmp(tmpbuf, "ce", 2) == 0))
-						{
-							pAd->CommonCfg.RadarDetect.RDDurRegion = CE;
-							pAd->CommonCfg.RadarDetect.DfsSessionTime = 13;
-						}
-						else
-						{
-							pAd->CommonCfg.RadarDetect.RDDurRegion = CE;
-							pAd->CommonCfg.RadarDetect.DfsSessionTime = 13;
-						}
-
-						DBGPRINT(RT_DEBUG_TRACE, ("RDRegion=%d\n", pAd->CommonCfg.RadarDetect.RDDurRegion));
-					}
-					else
-					{
-						pAd->CommonCfg.RadarDetect.RDDurRegion = CE;
-						pAd->CommonCfg.RadarDetect.DfsSessionTime = 13;
-					}
-
-					//WirelessEvent
-					if(RTMPGetKeyParameter("WirelessEvent", tmpbuf, 10, buffer))
-					{
-#if WIRELESS_EXT >= 15
-					    if(simple_strtol(tmpbuf, 0, 10) != 0)
-							pAd->CommonCfg.bWirelessEvent = simple_strtol(tmpbuf, 0, 10);
-						else
-							pAd->CommonCfg.bWirelessEvent = 0;	// disable
-#else
-						pAd->CommonCfg.bWirelessEvent = 0;	// disable
-#endif
-   						DBGPRINT(RT_DEBUG_TRACE, ("WirelessEvent=%d\n", pAd->CommonCfg.bWirelessEvent));
-					}
-					if(RTMPGetKeyParameter("WiFiTest", tmpbuf, 10, buffer))
-					{
-					    if(simple_strtol(tmpbuf, 0, 10) != 0)
-							pAd->CommonCfg.bWiFiTest= simple_strtol(tmpbuf, 0, 10);
-						else
-							pAd->CommonCfg.bWiFiTest = 0;	// disable
-
-   						DBGPRINT(RT_DEBUG_TRACE, ("WiFiTest=%d\n", pAd->CommonCfg.bWiFiTest));
-					}
-					//AuthMode
-					if(RTMPGetKeyParameter("AuthMode", tmpbuf, 128, buffer))
-					{
-#ifdef CONFIG_STA_SUPPORT
-						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-						{
-							if ((strcmp(tmpbuf, "WEPAUTO") == 0) || (strcmp(tmpbuf, "wepauto") == 0))
-							    pAd->StaCfg.AuthMode = Ndis802_11AuthModeAutoSwitch;
-							else if ((strcmp(tmpbuf, "SHARED") == 0) || (strcmp(tmpbuf, "shared") == 0))
-							    pAd->StaCfg.AuthMode = Ndis802_11AuthModeShared;
-							else if ((strcmp(tmpbuf, "WPAPSK") == 0) || (strcmp(tmpbuf, "wpapsk") == 0))
-							    pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPAPSK;
-							else if ((strcmp(tmpbuf, "WPANONE") == 0) || (strcmp(tmpbuf, "wpanone") == 0))
-							    pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPANone;
-							else if ((strcmp(tmpbuf, "WPA2PSK") == 0) || (strcmp(tmpbuf, "wpa2psk") == 0))
-							    pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPA2PSK;
-#ifdef WPA_SUPPLICANT_SUPPORT
-							else if ((strcmp(tmpbuf, "WPA") == 0) || (strcmp(tmpbuf, "wpa") == 0))
-							    pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPA;
-							else if ((strcmp(tmpbuf, "WPA2") == 0) || (strcmp(tmpbuf, "wpa2") == 0))
-							    pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPA2;
-#endif // WPA_SUPPLICANT_SUPPORT //
-				                        else
-				                            pAd->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
-
-				                        pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-
-							DBGPRINT(RT_DEBUG_TRACE, ("%s::(EncrypType=%d)\n", __FUNCTION__, pAd->StaCfg.WepStatus));
-						}
-#endif // CONFIG_STA_SUPPORT //
-					}
-					//EncrypType
-					if(RTMPGetKeyParameter("EncrypType", tmpbuf, 128, buffer))
-					{
-
-#ifdef CONFIG_STA_SUPPORT
-						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-						{
-							if ((strcmp(tmpbuf, "WEP") == 0) || (strcmp(tmpbuf, "wep") == 0))
-								pAd->StaCfg.WepStatus	= Ndis802_11WEPEnabled;
-							else if ((strcmp(tmpbuf, "TKIP") == 0) || (strcmp(tmpbuf, "tkip") == 0))
-								pAd->StaCfg.WepStatus	= Ndis802_11Encryption2Enabled;
-							else if ((strcmp(tmpbuf, "AES") == 0) || (strcmp(tmpbuf, "aes") == 0))
-								pAd->StaCfg.WepStatus	= Ndis802_11Encryption3Enabled;
-							else
-								pAd->StaCfg.WepStatus	= Ndis802_11WEPDisabled;
-
-							// Update all wepstatus related
-							pAd->StaCfg.PairCipher		= pAd->StaCfg.WepStatus;
-							pAd->StaCfg.GroupCipher 	= pAd->StaCfg.WepStatus;
-							pAd->StaCfg.OrigWepStatus 	= pAd->StaCfg.WepStatus;
-							pAd->StaCfg.bMixCipher 		= FALSE;
-
-							//RTMPMakeRSNIE(pAd, pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus, 0);
-							DBGPRINT(RT_DEBUG_TRACE, ("%s::(EncrypType=%d)\n", __FUNCTION__, pAd->StaCfg.WepStatus));
-						}
-#endif // CONFIG_STA_SUPPORT //
-					}
-
-
-
-#ifdef CONFIG_STA_SUPPORT
-					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-					{
-						if(RTMPGetCriticalParameter("WPAPSK", tmpbuf, 512, buffer))
-						{
-							int     err=0;
-
-							tmpbuf[strlen(tmpbuf)] = '\0'; // make STA can process .$^& for WPAPSK input
-
-							if ((pAd->StaCfg.AuthMode != Ndis802_11AuthModeWPAPSK) &&
-								(pAd->StaCfg.AuthMode != Ndis802_11AuthModeWPA2PSK) &&
-								(pAd->StaCfg.AuthMode != Ndis802_11AuthModeWPANone)
-								)
-							{
-								err = 1;
-							}
-							else if ((strlen(tmpbuf) >= 8) && (strlen(tmpbuf) < 64))
-							{
-								PasswordHash((char *)tmpbuf, pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen, keyMaterial);
-								NdisMoveMemory(pAd->StaCfg.PMK, keyMaterial, 32);
-
-							}
-							else if (strlen(tmpbuf) == 64)
-							{
-								AtoH(tmpbuf, keyMaterial, 32);
-								NdisMoveMemory(pAd->StaCfg.PMK, keyMaterial, 32);
-							}
-							else
-							{
-								err = 1;
-								DBGPRINT(RT_DEBUG_ERROR, ("%s::(WPAPSK key-string required 8 ~ 64 characters!)\n", __FUNCTION__));
-							}
-
-							if (err == 0)
-	                        			{
-	                        				if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
-									(pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK))
-								{
-									// Start STA supplicant state machine
-									pAd->StaCfg.WpaState = SS_START;
-								}
-								else if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
-								{
-	/*
-									NdisZeroMemory(&pAd->SharedKey[BSS0][0], sizeof(CIPHER_KEY));
-									pAd->SharedKey[BSS0][0].KeyLen = LEN_TKIP_EK;
-									NdisMoveMemory(pAd->SharedKey[BSS0][0].Key, pAd->StaCfg.PMK, LEN_TKIP_EK);
-									NdisMoveMemory(pAd->SharedKey[BSS0][0].RxMic, &pAd->StaCfg.PMK[16], LEN_TKIP_RXMICK);
-									NdisMoveMemory(pAd->SharedKey[BSS0][0].TxMic, &pAd->StaCfg.PMK[16], LEN_TKIP_TXMICK);
-
-									// Decide its ChiperAlg
-									if (pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled)
-										pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_TKIP;
-									else if (pAd->StaCfg.PairCipher == Ndis802_11Encryption3Enabled)
-										pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_AES;
-									else
-										pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_NONE;
-	*/
-									pAd->StaCfg.WpaState = SS_NOTUSE;
-								}
-
-								DBGPRINT(RT_DEBUG_TRACE, ("%s::(WPAPSK=%s)\n", __FUNCTION__, tmpbuf));
-							}
-						}
-					}
-#endif // CONFIG_STA_SUPPORT //
-
-					//DefaultKeyID, KeyType, KeyStr
-					rtmp_read_key_parms_from_file(pAd, tmpbuf, buffer);
-
-
-					//HSCounter
-					/*if(RTMPGetKeyParameter("HSCounter", tmpbuf, 10, buffer))
-					{
-						switch (simple_strtol(tmpbuf, 0, 10))
-						{
-							case 1: //Enable
-								pAd->CommonCfg.bEnableHSCounter = TRUE;
-								break;
-							case 0: //Disable
-							default:
-								pAd->CommonCfg.bEnableHSCounter = FALSE;
-								break;
-						}
-						DBGPRINT(RT_DEBUG_TRACE, "HSCounter=%d\n", pAd->CommonCfg.bEnableHSCounter);
-					}*/
-
-#ifdef DOT11_N_SUPPORT
-					HTParametersHook(pAd, tmpbuf, buffer);
-#endif // DOT11_N_SUPPORT //
-
-
-#ifdef CARRIER_DETECTION_SUPPORT
-						//CarrierDetect
-						if(RTMPGetKeyParameter("CarrierDetect", tmpbuf, 128, buffer))
-						{
-							if ((strncmp(tmpbuf, "0", 1) == 0))
-								pAd->CommonCfg.CarrierDetect.Enable = FALSE;
-							else if ((strncmp(tmpbuf, "1", 1) == 0))
-								pAd->CommonCfg.CarrierDetect.Enable = TRUE;
-							else
-								pAd->CommonCfg.CarrierDetect.Enable = FALSE;
-
-							DBGPRINT(RT_DEBUG_TRACE, ("CarrierDetect.Enable=%d\n", pAd->CommonCfg.CarrierDetect.Enable));
-						}
-						else
-							pAd->CommonCfg.CarrierDetect.Enable = FALSE;
-#endif // CARRIER_DETECTION_SUPPORT //
-
-#ifdef CONFIG_STA_SUPPORT
-					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-					{
-						//PSMode
-						if (RTMPGetKeyParameter("PSMode", tmpbuf, 10, buffer))
-						{
-							if (pAd->StaCfg.BssType == BSS_INFRA)
-							{
-								if ((strcmp(tmpbuf, "MAX_PSP") == 0) || (strcmp(tmpbuf, "max_psp") == 0))
-								{
-									// do NOT turn on PSM bit here, wait until MlmeCheckForPsmChange()
-									// to exclude certain situations.
-									//	   MlmeSetPsm(pAd, PWR_SAVE);
-									OPSTATUS_SET_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM);
-									if (pAd->StaCfg.bWindowsACCAMEnable == FALSE)
-										pAd->StaCfg.WindowsPowerMode = Ndis802_11PowerModeMAX_PSP;
-									pAd->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeMAX_PSP;
-									pAd->StaCfg.DefaultListenCount = 5;
-								}
-								else if ((strcmp(tmpbuf, "Fast_PSP") == 0) || (strcmp(tmpbuf, "fast_psp") == 0)
-									|| (strcmp(tmpbuf, "FAST_PSP") == 0))
-								{
-									// do NOT turn on PSM bit here, wait until MlmeCheckForPsmChange()
-									// to exclude certain situations.
-									//	   MlmeSetPsmBit(pAd, PWR_SAVE);
-									OPSTATUS_SET_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM);
-									if (pAd->StaCfg.bWindowsACCAMEnable == FALSE)
-										pAd->StaCfg.WindowsPowerMode = Ndis802_11PowerModeFast_PSP;
-									pAd->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeFast_PSP;
-									pAd->StaCfg.DefaultListenCount = 3;
-								}
-								else if ((strcmp(tmpbuf, "Legacy_PSP") == 0) || (strcmp(tmpbuf, "legacy_psp") == 0)
-									|| (strcmp(tmpbuf, "LEGACY_PSP") == 0))
-								{
-									// do NOT turn on PSM bit here, wait until MlmeCheckForPsmChange()
-									// to exclude certain situations.
-									//	   MlmeSetPsmBit(pAd, PWR_SAVE);
-									OPSTATUS_SET_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM);
-									if (pAd->StaCfg.bWindowsACCAMEnable == FALSE)
-										pAd->StaCfg.WindowsPowerMode = Ndis802_11PowerModeLegacy_PSP;
-									pAd->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeLegacy_PSP;
-									pAd->StaCfg.DefaultListenCount = 3;
-								}
-								else
-								{ //Default Ndis802_11PowerModeCAM
-									// clear PSM bit immediately
-									MlmeSetPsmBit(pAd, PWR_ACTIVE);
-									OPSTATUS_SET_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM);
-									if (pAd->StaCfg.bWindowsACCAMEnable == FALSE)
-										pAd->StaCfg.WindowsPowerMode = Ndis802_11PowerModeCAM;
-									pAd->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeCAM;
-								}
-								DBGPRINT(RT_DEBUG_TRACE, ("PSMode=%ld\n", pAd->StaCfg.WindowsPowerMode));
-							}
-						}
-						// FastRoaming
-						if (RTMPGetKeyParameter("FastRoaming", tmpbuf, 32, buffer))
-						{
-							if (simple_strtol(tmpbuf, 0, 10) == 0)
-								pAd->StaCfg.bFastRoaming = FALSE;
-							else
-								pAd->StaCfg.bFastRoaming = TRUE;
-
-							DBGPRINT(RT_DEBUG_TRACE, ("FastRoaming=%d\n", pAd->StaCfg.bFastRoaming));
-						}
-						// RoamThreshold
-						if (RTMPGetKeyParameter("RoamThreshold", tmpbuf, 32, buffer))
-						{
-							long lInfo = simple_strtol(tmpbuf, 0, 10);
-
-							if (lInfo > 90 || lInfo < 60)
-								pAd->StaCfg.dBmToRoam = -70;
-							else
-								pAd->StaCfg.dBmToRoam = (CHAR)(-1)*lInfo;
-
-							DBGPRINT(RT_DEBUG_TRACE, ("RoamThreshold=%d  dBm\n", pAd->StaCfg.dBmToRoam));
-						}
-
-						if(RTMPGetKeyParameter("TGnWifiTest", tmpbuf, 10, buffer))
-						{
-							if(simple_strtol(tmpbuf, 0, 10) == 0)
-								pAd->StaCfg.bTGnWifiTest = FALSE;
-							else
-								pAd->StaCfg.bTGnWifiTest = TRUE;
-								DBGPRINT(RT_DEBUG_TRACE, ("TGnWifiTest=%d\n", pAd->StaCfg.bTGnWifiTest));
-						}
-					}
-#endif // CONFIG_STA_SUPPORT //
-
-
-#ifdef RT30xx
-#ifdef CONFIG_STA_SUPPORT
-						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-						{
-							if(RTMPGetKeyParameter("AntDiversity", tmpbuf, 10, buffer))
-							{
-								for (i = 0, macptr = rstrtok(tmpbuf,";"); macptr; macptr = rstrtok(NULL,";"), i++)
-								{
-									if(simple_strtol(macptr, 0, 10) != 0)  //Enable
-										pAd->CommonCfg.bRxAntDiversity = TRUE;
-									else //Disable
-										pAd->CommonCfg.bRxAntDiversity = FALSE;
-
-									DBGPRINT(RT_DEBUG_ERROR, ("AntDiversity=%d\n", pAd->CommonCfg.bRxAntDiversity));
-								}
-							}
-						}
-#endif // CONFIG_STA_SUPPORT //
-#endif // RT30xx //
-				}
-			}
-			else
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("--> %s does not have a write method\n", src));
-			}
-
-			retval=filp_close(srcf,NULL);
-
-			if (retval)
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("--> Error %d closing %s\n", -retval, src));
-			}
-		}
-	}
-
-	set_fs(orgfs);
-#if 0
-	current->fsuid = orgfsuid;
-	current->fsgid = orgfsgid;
-#endif
-
-	kfree(buffer);
-	kfree(tmpbuf);
-
-	return (NDIS_STATUS_SUCCESS);
-}
-
-#ifdef DOT11_N_SUPPORT
-static void	HTParametersHook(
-	IN	PRTMP_ADAPTER pAd,
-	IN	CHAR		  *pValueStr,
-	IN	CHAR		  *pInput)
-{
-
-	INT Value;
-
-    if (RTMPGetKeyParameter("HT_PROTECT", pValueStr, 25, pInput))
-    {
-        Value = simple_strtol(pValueStr, 0, 10);
-        if (Value == 0)
-        {
-            pAd->CommonCfg.bHTProtect = FALSE;
-        }
-        else
-        {
-            pAd->CommonCfg.bHTProtect = TRUE;
-        }
-        DBGPRINT(RT_DEBUG_TRACE, ("HT: Protection  = %s\n", (Value==0) ? "Disable" : "Enable"));
-    }
-
-    if (RTMPGetKeyParameter("HT_MIMOPSEnable", pValueStr, 25, pInput))
-    {
-        Value = simple_strtol(pValueStr, 0, 10);
-        if (Value == 0)
-        {
-            pAd->CommonCfg.bMIMOPSEnable = FALSE;
-        }
-        else
-        {
-            pAd->CommonCfg.bMIMOPSEnable = TRUE;
-        }
-        DBGPRINT(RT_DEBUG_TRACE, ("HT: MIMOPSEnable  = %s\n", (Value==0) ? "Disable" : "Enable"));
-    }
-
-
-    if (RTMPGetKeyParameter("HT_MIMOPSMode", pValueStr, 25, pInput))
-    {
-        Value = simple_strtol(pValueStr, 0, 10);
-        if (Value > MMPS_ENABLE)
-        {
-			pAd->CommonCfg.BACapability.field.MMPSmode = MMPS_ENABLE;
-        }
-        else
-        {
-            //TODO: add mimo power saving mechanism
-            pAd->CommonCfg.BACapability.field.MMPSmode = MMPS_ENABLE;
-			//pAd->CommonCfg.BACapability.field.MMPSmode = Value;
-        }
-        DBGPRINT(RT_DEBUG_TRACE, ("HT: MIMOPS Mode  = %d\n", Value));
-    }
-
-    if (RTMPGetKeyParameter("HT_BADecline", pValueStr, 25, pInput))
-    {
-        Value = simple_strtol(pValueStr, 0, 10);
-        if (Value == 0)
-        {
-            pAd->CommonCfg.bBADecline = FALSE;
-        }
-        else
-        {
-            pAd->CommonCfg.bBADecline = TRUE;
-        }
-        DBGPRINT(RT_DEBUG_TRACE, ("HT: BA Decline  = %s\n", (Value==0) ? "Disable" : "Enable"));
-    }
-
-
-    if (RTMPGetKeyParameter("HT_DisableReordering", pValueStr, 25, pInput))
-    {
-        Value = simple_strtol(pValueStr, 0, 10);
-        if (Value == 0)
-        {
-            pAd->CommonCfg.bDisableReordering = FALSE;
-        }
-        else
-        {
-            pAd->CommonCfg.bDisableReordering = TRUE;
-        }
-        DBGPRINT(RT_DEBUG_TRACE, ("HT: DisableReordering  = %s\n", (Value==0) ? "Disable" : "Enable"));
-    }
-
-    if (RTMPGetKeyParameter("HT_AutoBA", pValueStr, 25, pInput))
-    {
-        Value = simple_strtol(pValueStr, 0, 10);
-        if (Value == 0)
-        {
-            pAd->CommonCfg.BACapability.field.AutoBA = FALSE;
-	    pAd->CommonCfg.BACapability.field.Policy = BA_NOTUSE;
-        }
-        else
-        {
-            pAd->CommonCfg.BACapability.field.AutoBA = TRUE;
-	    pAd->CommonCfg.BACapability.field.Policy = IMMED_BA;
-        }
-        pAd->CommonCfg.REGBACapability.field.AutoBA = pAd->CommonCfg.BACapability.field.AutoBA;
-	pAd->CommonCfg.REGBACapability.field.Policy = pAd->CommonCfg.BACapability.field.Policy;
-        DBGPRINT(RT_DEBUG_TRACE, ("HT: Auto BA  = %s\n", (Value==0) ? "Disable" : "Enable"));
-    }
-
-	// Tx_+HTC frame
-    if (RTMPGetKeyParameter("HT_HTC", pValueStr, 25, pInput))
-	{
-		Value = simple_strtol(pValueStr, 0, 10);
-		if (Value == 0)
-		{
-			pAd->HTCEnable = FALSE;
-		}
-		else
-		{
-            		pAd->HTCEnable = TRUE;
-		}
-		DBGPRINT(RT_DEBUG_TRACE, ("HT: Tx +HTC frame = %s\n", (Value==0) ? "Disable" : "Enable"));
-	}
-
-	// Enable HT Link Adaptation Control
-	if (RTMPGetKeyParameter("HT_LinkAdapt", pValueStr, 25, pInput))
-	{
-		Value = simple_strtol(pValueStr, 0, 10);
-		if (Value == 0)
-		{
-			pAd->bLinkAdapt = FALSE;
-		}
-		else
-		{
-			pAd->HTCEnable = TRUE;
-			pAd->bLinkAdapt = TRUE;
-		}
-		DBGPRINT(RT_DEBUG_TRACE, ("HT: Link Adaptation Control = %s\n", (Value==0) ? "Disable" : "Enable(+HTC)"));
-	}
-
-	// Reverse Direction Mechanism
-    if (RTMPGetKeyParameter("HT_RDG", pValueStr, 25, pInput))
-	{
-		Value = simple_strtol(pValueStr, 0, 10);
-		if (Value == 0)
-		{
-			pAd->CommonCfg.bRdg = FALSE;
-		}
-		else
-		{
-			pAd->HTCEnable = TRUE;
-            pAd->CommonCfg.bRdg = TRUE;
-		}
-		DBGPRINT(RT_DEBUG_TRACE, ("HT: RDG = %s\n", (Value==0) ? "Disable" : "Enable(+HTC)"));
-	}
-
-
-
-
-	// Tx A-MSUD ?
-    if (RTMPGetKeyParameter("HT_AMSDU", pValueStr, 25, pInput))
-	{
-		Value = simple_strtol(pValueStr, 0, 10);
-		if (Value == 0)
-		{
-			pAd->CommonCfg.BACapability.field.AmsduEnable = FALSE;
-		}
-		else
-		{
-            pAd->CommonCfg.BACapability.field.AmsduEnable = TRUE;
-		}
-		DBGPRINT(RT_DEBUG_TRACE, ("HT: Tx A-MSDU = %s\n", (Value==0) ? "Disable" : "Enable"));
-	}
-
-	// MPDU Density
-    if (RTMPGetKeyParameter("HT_MpduDensity", pValueStr, 25, pInput))
-	{
-		Value = simple_strtol(pValueStr, 0, 10);
-		if (Value <=7 && Value >= 0)
-		{
-			pAd->CommonCfg.BACapability.field.MpduDensity = Value;
-			DBGPRINT(RT_DEBUG_TRACE, ("HT: MPDU Density = %d\n", Value));
-		}
-		else
-		{
-			pAd->CommonCfg.BACapability.field.MpduDensity = 4;
-			DBGPRINT(RT_DEBUG_TRACE, ("HT: MPDU Density = %d (Default)\n", 4));
-		}
-	}
-
-	// Max Rx BA Window Size
-    if (RTMPGetKeyParameter("HT_BAWinSize", pValueStr, 25, pInput))
-	{
-		Value = simple_strtol(pValueStr, 0, 10);
-
-		if (Value >=1 && Value <= 64)
-		{
-			pAd->CommonCfg.REGBACapability.field.RxBAWinLimit = Value;
-			pAd->CommonCfg.BACapability.field.RxBAWinLimit = Value;
-			DBGPRINT(RT_DEBUG_TRACE, ("HT: BA Windw Size = %d\n", Value));
-		}
-		else
-		{
-            pAd->CommonCfg.REGBACapability.field.RxBAWinLimit = 64;
-			pAd->CommonCfg.BACapability.field.RxBAWinLimit = 64;
-			DBGPRINT(RT_DEBUG_TRACE, ("HT: BA Windw Size = 64 (Defualt)\n"));
-		}
-
-	}
-
-	// Guard Interval
-	if (RTMPGetKeyParameter("HT_GI", pValueStr, 25, pInput))
-	{
-		Value = simple_strtol(pValueStr, 0, 10);
-
-		if (Value == GI_400)
-		{
-			pAd->CommonCfg.RegTransmitSetting.field.ShortGI = GI_400;
-		}
-		else
-		{
-			pAd->CommonCfg.RegTransmitSetting.field.ShortGI = GI_800;
-		}
-
-		DBGPRINT(RT_DEBUG_TRACE, ("HT: Guard Interval = %s\n", (Value==GI_400) ? "400" : "800" ));
-	}
-
-	// HT Operation Mode : Mixed Mode , Green Field
-	if (RTMPGetKeyParameter("HT_OpMode", pValueStr, 25, pInput))
-	{
-		Value = simple_strtol(pValueStr, 0, 10);
-
-		if (Value == HTMODE_GF)
-		{
-
-			pAd->CommonCfg.RegTransmitSetting.field.HTMODE  = HTMODE_GF;
-		}
-		else
-		{
-			pAd->CommonCfg.RegTransmitSetting.field.HTMODE  = HTMODE_MM;
-		}
-
-		DBGPRINT(RT_DEBUG_TRACE, ("HT: Operate Mode = %s\n", (Value==HTMODE_GF) ? "Green Field" : "Mixed Mode" ));
-	}
-
-	// Fixed Tx mode : CCK, OFDM
-	if (RTMPGetKeyParameter("FixedTxMode", pValueStr, 25, pInput))
-	{
-		UCHAR	fix_tx_mode;
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			fix_tx_mode = FIXED_TXMODE_HT;
-
-			if (strcmp(pValueStr, "OFDM") == 0 || strcmp(pValueStr, "ofdm") == 0)
-			{
-				fix_tx_mode = FIXED_TXMODE_OFDM;
-			}
-			else if (strcmp(pValueStr, "CCK") == 0 || strcmp(pValueStr, "cck") == 0)
-			{
-		        fix_tx_mode = FIXED_TXMODE_CCK;
-			}
-			else if (strcmp(pValueStr, "HT") == 0 || strcmp(pValueStr, "ht") == 0)
-			{
-		        fix_tx_mode = FIXED_TXMODE_HT;
-		}
-		else
-		{
-				Value = simple_strtol(pValueStr, 0, 10);
-				// 1 : CCK
-				// 2 : OFDM
-				// otherwise : HT
-				if (Value == FIXED_TXMODE_CCK || Value == FIXED_TXMODE_OFDM)
-					fix_tx_mode = Value;
-				else
-					fix_tx_mode = FIXED_TXMODE_HT;
-		}
-
-			pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode = fix_tx_mode;
-			DBGPRINT(RT_DEBUG_TRACE, ("Fixed Tx Mode = %d\n", fix_tx_mode));
-
-		}
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-
-	// Channel Width
-	if (RTMPGetKeyParameter("HT_BW", pValueStr, 25, pInput))
-	{
-		Value = simple_strtol(pValueStr, 0, 10);
-
-		if (Value == BW_40)
-		{
-			pAd->CommonCfg.RegTransmitSetting.field.BW  = BW_40;
-		}
-		else
-		{
-            pAd->CommonCfg.RegTransmitSetting.field.BW  = BW_20;
-		}
-
-#ifdef MCAST_RATE_SPECIFIC
-		pAd->CommonCfg.MCastPhyMode.field.BW = pAd->CommonCfg.RegTransmitSetting.field.BW;
-#endif // MCAST_RATE_SPECIFIC //
-
-		DBGPRINT(RT_DEBUG_TRACE, ("HT: Channel Width = %s\n", (Value==BW_40) ? "40 MHz" : "20 MHz" ));
-	}
-
-	if (RTMPGetKeyParameter("HT_EXTCHA", pValueStr, 25, pInput))
-	{
-		Value = simple_strtol(pValueStr, 0, 10);
-
-		if (Value == 0)
-		{
-
-			pAd->CommonCfg.RegTransmitSetting.field.EXTCHA  = EXTCHA_BELOW;
-		}
-		else
-		{
-            pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_ABOVE;
-		}
-
-		DBGPRINT(RT_DEBUG_TRACE, ("HT: Ext Channel = %s\n", (Value==0) ? "BELOW" : "ABOVE" ));
-	}
-
-	// MSC
-	if (RTMPGetKeyParameter("HT_MCS", pValueStr, 50, pInput))
-	{
-
-#ifdef CONFIG_STA_SUPPORT
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
-			Value = simple_strtol(pValueStr, 0, 10);
-
-//			if ((Value >= 0 && Value <= 15) || (Value == 32))
-			if ((Value >= 0 && Value <= 23) || (Value == 32)) // 3*3
-		{
-				pAd->StaCfg.DesiredTransmitSetting.field.MCS  = Value;
-				pAd->StaCfg.bAutoTxRateSwitch = FALSE;
-				DBGPRINT(RT_DEBUG_TRACE, ("HT: MCS = %d\n", pAd->StaCfg.DesiredTransmitSetting.field.MCS));
-		}
-		else
-		{
-				pAd->StaCfg.DesiredTransmitSetting.field.MCS  = MCS_AUTO;
-				pAd->StaCfg.bAutoTxRateSwitch = TRUE;
-				DBGPRINT(RT_DEBUG_TRACE, ("HT: MCS = AUTO\n"));
-		}
-	}
-#endif // CONFIG_STA_SUPPORT //
-	}
-
-	// STBC
-    if (RTMPGetKeyParameter("HT_STBC", pValueStr, 25, pInput))
-	{
-		Value = simple_strtol(pValueStr, 0, 10);
-		if (Value == STBC_USE)
-		{
-			pAd->CommonCfg.RegTransmitSetting.field.STBC = STBC_USE;
-		}
-		else
-		{
-			pAd->CommonCfg.RegTransmitSetting.field.STBC = STBC_NONE;
-		}
-		DBGPRINT(RT_DEBUG_TRACE, ("HT: STBC = %d\n", pAd->CommonCfg.RegTransmitSetting.field.STBC));
-	}
-
-	// 40_Mhz_Intolerant
-	if (RTMPGetKeyParameter("HT_40MHZ_INTOLERANT", pValueStr, 25, pInput))
-	{
-		Value = simple_strtol(pValueStr, 0, 10);
-		if (Value == 0)
-		{
-			pAd->CommonCfg.bForty_Mhz_Intolerant = FALSE;
-		}
-		else
-		{
-			pAd->CommonCfg.bForty_Mhz_Intolerant = TRUE;
-		}
-		DBGPRINT(RT_DEBUG_TRACE, ("HT: 40MHZ INTOLERANT = %d\n", pAd->CommonCfg.bForty_Mhz_Intolerant));
-	}
-	//HT_TxStream
-	if(RTMPGetKeyParameter("HT_TxStream", pValueStr, 10, pInput))
-	{
-		switch (simple_strtol(pValueStr, 0, 10))
-		{
-			case 1:
-				pAd->CommonCfg.TxStream = 1;
-				break;
-			case 2:
-				pAd->CommonCfg.TxStream = 2;
-				break;
-			case 3: // 3*3
-			default:
-				pAd->CommonCfg.TxStream = 3;
-
-				if (pAd->MACVersion < RALINK_2883_VERSION)
-					pAd->CommonCfg.TxStream = 2; // only 2 tx streams for RT2860 series
-				break;
-		}
-		DBGPRINT(RT_DEBUG_TRACE, ("HT: Tx Stream = %d\n", pAd->CommonCfg.TxStream));
-	}
-	//HT_RxStream
-	if(RTMPGetKeyParameter("HT_RxStream", pValueStr, 10, pInput))
-	{
-		switch (simple_strtol(pValueStr, 0, 10))
-		{
-			case 1:
-				pAd->CommonCfg.RxStream = 1;
-				break;
-			case 2:
-				pAd->CommonCfg.RxStream = 2;
-				break;
-			case 3:
-			default:
-				pAd->CommonCfg.RxStream = 3;
-
-				if (pAd->MACVersion < RALINK_2883_VERSION)
-					pAd->CommonCfg.RxStream = 2; // only 2 rx streams for RT2860 series
-				break;
-		}
-		DBGPRINT(RT_DEBUG_TRACE, ("HT: Rx Stream = %d\n", pAd->CommonCfg.RxStream));
-	}
-
-}
-#endif // DOT11_N_SUPPORT //
-
+#include "../rt2870/rt_profile.c"
diff --git a/drivers/staging/rt3070/rtmp.h b/drivers/staging/rt3070/rtmp.h
index d80d74ffbc8..5390ca3eb27 100644
--- a/drivers/staging/rt3070/rtmp.h
+++ b/drivers/staging/rt3070/rtmp.h
@@ -1,7728 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-    rtmp.h
-
-    Abstract:
-    Miniport generic portion header file
-
-    Revision History:
-    Who         When          What
-    --------    ----------    ----------------------------------------------
-    Paul Lin    2002-08-01    created
-    James Tan   2002-09-06    modified (Revise NTCRegTable)
-    John Chang  2004-09-06    modified for RT2600
-*/
-#ifndef __RTMP_H__
-#define __RTMP_H__
-
-#include "link_list.h"
-#include "spectrum_def.h"
-
-#ifdef MLME_EX
-#include "mlme_ex_def.h"
-#endif // MLME_EX //
-
-#ifdef CONFIG_STA_SUPPORT
-#include "aironet.h"
-#endif // CONFIG_STA_SUPPORT //
-
-#undef AP_WSC_INCLUDED
-#undef STA_WSC_INCLUDED
-#undef WSC_INCLUDED
-
-
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-
-#if defined(AP_WSC_INCLUDED) || defined(STA_WSC_INCLUDED)
-#define WSC_INCLUDED
-#endif
-
-
-
-
-
-//#define DBG		1
-
-//#define DBG_DIAGNOSE		1
-
-#if defined(CONFIG_AP_SUPPORT) && defined(CONFIG_STA_SUPPORT)
-#define IF_DEV_CONFIG_OPMODE_ON_AP(_pAd)	if(_pAd->OpMode == OPMODE_AP)
-#define IF_DEV_CONFIG_OPMODE_ON_STA(_pAd)	if(_pAd->OpMode == OPMODE_STA)
-#else
-#define IF_DEV_CONFIG_OPMODE_ON_AP(_pAd)
-#define IF_DEV_CONFIG_OPMODE_ON_STA(_pAd)
-#endif
-
-#define VIRTUAL_IF_INC(__pAd) ((__pAd)->VirtualIfCnt++)
-#define VIRTUAL_IF_DEC(__pAd) ((__pAd)->VirtualIfCnt--)
-#define VIRTUAL_IF_NUM(__pAd) ((__pAd)->VirtualIfCnt)
-
-#ifdef RT2870
-////////////////////////////////////////////////////////////////////////////
-// The TX_BUFFER structure forms the transmitted USB packet to the device
-////////////////////////////////////////////////////////////////////////////
-typedef struct __TX_BUFFER{
-	union	{
-		UCHAR			WirelessPacket[TX_BUFFER_NORMSIZE];
-		HEADER_802_11	NullFrame;
-		PSPOLL_FRAME	PsPollPacket;
-		RTS_FRAME		RTSFrame;
-	}field;
-	UCHAR			Aggregation[4];  //Buffer for save Aggregation size.
-} TX_BUFFER, *PTX_BUFFER;
-
-typedef struct __HTTX_BUFFER{
-	union	{
-		UCHAR			WirelessPacket[MAX_TXBULK_SIZE];
-		HEADER_802_11	NullFrame;
-		PSPOLL_FRAME	PsPollPacket;
-		RTS_FRAME		RTSFrame;
-	}field;
-	UCHAR			Aggregation[4];  //Buffer for save Aggregation size.
-} HTTX_BUFFER, *PHTTX_BUFFER;
-
-
-// used to track driver-generated write irps
-typedef struct _TX_CONTEXT
-{
-	PVOID			pAd;		//Initialized in MiniportInitialize
-	PURB			pUrb;			//Initialized in MiniportInitialize
-	PIRP			pIrp;			//used to cancel pending bulk out.
-									//Initialized in MiniportInitialize
-	PTX_BUFFER		TransferBuffer;	//Initialized in MiniportInitialize
-	ULONG			BulkOutSize;
-	UCHAR			BulkOutPipeId;
-	UCHAR			SelfIdx;
-	BOOLEAN			InUse;
-	BOOLEAN			bWaitingBulkOut; // at least one packet is in this TxContext, ready for making IRP anytime.
-	BOOLEAN			bFullForBulkOut; // all tx buffer are full , so waiting for tx bulkout.
-	BOOLEAN			IRPPending;
-	BOOLEAN			LastOne;
-	BOOLEAN			bAggregatible;
-	UCHAR			Header_802_3[LENGTH_802_3];
-	UCHAR			Rsv[2];
-	ULONG			DataOffset;
-	UINT			TxRate;
-	dma_addr_t		data_dma;		// urb dma on linux
-
-}	TX_CONTEXT, *PTX_CONTEXT, **PPTX_CONTEXT;
-
-
-// used to track driver-generated write irps
-typedef struct _HT_TX_CONTEXT
-{
-	PVOID			pAd;		//Initialized in MiniportInitialize
-	PURB			pUrb;			//Initialized in MiniportInitialize
-	PIRP			pIrp;			//used to cancel pending bulk out.
-									//Initialized in MiniportInitialize
-	PHTTX_BUFFER	TransferBuffer;	//Initialized in MiniportInitialize
-	ULONG			BulkOutSize;	// Indicate the total bulk-out size in bytes in one bulk-transmission
-	UCHAR			BulkOutPipeId;
-	BOOLEAN			IRPPending;
-	BOOLEAN			LastOne;
-	BOOLEAN			bCurWriting;
-	BOOLEAN			bRingEmpty;
-	BOOLEAN			bCopySavePad;
-	UCHAR			SavedPad[8];
-	UCHAR			Header_802_3[LENGTH_802_3];
-	ULONG			CurWritePosition;		// Indicate the buffer offset which packet will be inserted start from.
-	ULONG			CurWriteRealPos;		// Indicate the buffer offset which packet now are writing to.
-	ULONG			NextBulkOutPosition;	// Indicate the buffer start offset of a bulk-transmission
-	ULONG			ENextBulkOutPosition;	// Indicate the buffer end offset of a bulk-transmission
-	UINT			TxRate;
-	dma_addr_t		data_dma;		// urb dma on linux
-}	HT_TX_CONTEXT, *PHT_TX_CONTEXT, **PPHT_TX_CONTEXT;
-
-
-//
-// Structure to keep track of receive packets and buffers to indicate
-// receive data to the protocol.
-//
-typedef struct _RX_CONTEXT
-{
-	PUCHAR				TransferBuffer;
-	PVOID				pAd;
-	PIRP				pIrp;//used to cancel pending bulk in.
-	PURB				pUrb;
-	//These 2 Boolean shouldn't both be 1 at the same time.
-	ULONG				BulkInOffset;	// number of packets waiting for reordering .
-//	BOOLEAN				ReorderInUse;	// At least one packet in this buffer are in reordering buffer and wait for receive indication
-	BOOLEAN				bRxHandling;	// Notify this packet is being process now.
-	BOOLEAN				InUse;			// USB Hardware Occupied. Wait for USB HW to put packet.
-	BOOLEAN				Readable;		// Receive Complete back. OK for driver to indicate receiving packet.
-	BOOLEAN				IRPPending;		// TODO: To be removed
-	atomic_t			IrpLock;
-	NDIS_SPIN_LOCK		RxContextLock;
-	dma_addr_t			data_dma;		// urb dma on linux
-}	RX_CONTEXT, *PRX_CONTEXT;
-#endif // RT2870 //
-
-
-//
-//  NDIS Version definitions
-//
-#ifdef  NDIS50_MINIPORT
-#define RTMP_NDIS_MAJOR_VERSION     5
-#define RTMP_NDIS_MINOR_VERSION     0
-#endif
-
-#ifdef  NDIS51_MINIPORT
-#define RTMP_NDIS_MAJOR_VERSION     5
-#define RTMP_NDIS_MINOR_VERSION     1
-#endif
-
-extern  char    NIC_VENDOR_DESC[];
-extern  int     NIC_VENDOR_DESC_LEN;
-
-extern  unsigned char   SNAP_AIRONET[];
-extern  unsigned char   CipherSuiteCiscoCCKM[];
-extern  unsigned char   CipherSuiteCiscoCCKMLen;
-extern	unsigned char	CipherSuiteCiscoCCKM24[];
-extern	unsigned char	CipherSuiteCiscoCCKM24Len;
-extern  unsigned char   CipherSuiteCCXTkip[];
-extern  unsigned char   CipherSuiteCCXTkipLen;
-extern  unsigned char   CISCO_OUI[];
-extern  UCHAR	BaSizeArray[4];
-
-extern UCHAR BROADCAST_ADDR[MAC_ADDR_LEN];
-extern UCHAR MULTICAST_ADDR[MAC_ADDR_LEN];
-extern UCHAR ZERO_MAC_ADDR[MAC_ADDR_LEN];
-extern ULONG BIT32[32];
-extern UCHAR BIT8[8];
-extern char* CipherName[];
-extern char* MCSToMbps[];
-extern UCHAR	 RxwiMCSToOfdmRate[12];
-extern UCHAR SNAP_802_1H[6];
-extern UCHAR SNAP_BRIDGE_TUNNEL[6];
-extern UCHAR SNAP_AIRONET[8];
-extern UCHAR CKIP_LLC_SNAP[8];
-extern UCHAR EAPOL_LLC_SNAP[8];
-extern UCHAR EAPOL[2];
-extern UCHAR IPX[2];
-extern UCHAR APPLE_TALK[2];
-extern UCHAR RateIdToPlcpSignal[12]; // see IEEE802.11a-1999 p.14
-extern UCHAR	 OfdmRateToRxwiMCS[];
-extern UCHAR OfdmSignalToRateId[16] ;
-extern UCHAR default_cwmin[4];
-extern UCHAR default_cwmax[4];
-extern UCHAR default_sta_aifsn[4];
-extern UCHAR MapUserPriorityToAccessCategory[8];
-
-extern USHORT RateUpPER[];
-extern USHORT RateDownPER[];
-extern UCHAR  Phy11BNextRateDownward[];
-extern UCHAR  Phy11BNextRateUpward[];
-extern UCHAR  Phy11BGNextRateDownward[];
-extern UCHAR  Phy11BGNextRateUpward[];
-extern UCHAR  Phy11ANextRateDownward[];
-extern UCHAR  Phy11ANextRateUpward[];
-extern CHAR   RssiSafeLevelForTxRate[];
-extern UCHAR  RateIdToMbps[];
-extern USHORT RateIdTo500Kbps[];
-
-extern UCHAR  CipherSuiteWpaNoneTkip[];
-extern UCHAR  CipherSuiteWpaNoneTkipLen;
-
-extern UCHAR  CipherSuiteWpaNoneAes[];
-extern UCHAR  CipherSuiteWpaNoneAesLen;
-
-extern UCHAR  SsidIe;
-extern UCHAR  SupRateIe;
-extern UCHAR  ExtRateIe;
-
-#ifdef DOT11_N_SUPPORT
-extern UCHAR  HtCapIe;
-extern UCHAR  AddHtInfoIe;
-extern UCHAR  NewExtChanIe;
-#ifdef DOT11N_DRAFT3
-extern UCHAR  ExtHtCapIe;
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
-
-extern UCHAR  ErpIe;
-extern UCHAR  DsIe;
-extern UCHAR  TimIe;
-extern UCHAR  WpaIe;
-extern UCHAR  Wpa2Ie;
-extern UCHAR  IbssIe;
-extern UCHAR  Ccx2Ie;
-extern UCHAR  WapiIe;
-
-extern UCHAR  WPA_OUI[];
-extern UCHAR  RSN_OUI[];
-extern UCHAR  WAPI_OUI[];
-extern UCHAR  WME_INFO_ELEM[];
-extern UCHAR  WME_PARM_ELEM[];
-extern UCHAR  Ccx2QosInfo[];
-extern UCHAR  Ccx2IeInfo[];
-extern UCHAR  RALINK_OUI[];
-extern UCHAR  PowerConstraintIE[];
-
-
-extern UCHAR  RateSwitchTable[];
-extern UCHAR  RateSwitchTable11B[];
-extern UCHAR  RateSwitchTable11G[];
-extern UCHAR  RateSwitchTable11BG[];
-
-#ifdef DOT11_N_SUPPORT
-extern UCHAR  RateSwitchTable11BGN1S[];
-extern UCHAR  RateSwitchTable11BGN2S[];
-extern UCHAR  RateSwitchTable11BGN2SForABand[];
-extern UCHAR  RateSwitchTable11N1S[];
-extern UCHAR  RateSwitchTable11N2S[];
-extern UCHAR  RateSwitchTable11N2SForABand[];
-
-#ifdef CONFIG_STA_SUPPORT
-extern UCHAR  PRE_N_HT_OUI[];
-#endif // CONFIG_STA_SUPPORT //
-#endif // DOT11_N_SUPPORT //
-
-#define	MAXSEQ		(0xFFF)
-
-#ifdef RALINK_ATE
-typedef	struct _ATE_INFO {
-	UCHAR	Mode;
-	CHAR	TxPower0;
-	CHAR	TxPower1;
-	CHAR    TxAntennaSel;
-	CHAR    RxAntennaSel;
-	TXWI_STRUC  TxWI; 	  // TXWI
-	USHORT	QID;
-	UCHAR	Addr1[MAC_ADDR_LEN];
-	UCHAR	Addr2[MAC_ADDR_LEN];
-	UCHAR	Addr3[MAC_ADDR_LEN];
-	UCHAR	Channel;
-	UINT32	TxLength;
-	UINT32	TxCount;
-	UINT32	TxDoneCount; // Tx DMA Done
-	UINT32	RFFreqOffset;
-	BOOLEAN	bRxFer;
-	BOOLEAN	bQATxStart; // Have compiled QA in and use it to ATE tx.
-	BOOLEAN	bQARxStart;	// Have compiled QA in and use it to ATE rx.
-	UINT32	RxTotalCnt;
-	UINT32	RxCntPerSec;
-
-	CHAR	LastSNR0;             // last received SNR
-	CHAR    LastSNR1;             // last received SNR for 2nd  antenna
-	CHAR    LastRssi0;            // last received RSSI
-	CHAR    LastRssi1;            // last received RSSI for 2nd  antenna
-	CHAR    LastRssi2;            // last received RSSI for 3rd  antenna
-	CHAR    AvgRssi0;             // last 8 frames' average RSSI
-	CHAR    AvgRssi1;             // last 8 frames' average RSSI
-	CHAR    AvgRssi2;             // last 8 frames' average RSSI
-	SHORT   AvgRssi0X8;           // sum of last 8 frames' RSSI
-	SHORT   AvgRssi1X8;           // sum of last 8 frames' RSSI
-	SHORT   AvgRssi2X8;           // sum of last 8 frames' RSSI
-
-	UINT32	NumOfAvgRssiSample;
-
-#ifdef RALINK_28xx_QA
-	// Tx frame
-#ifdef RT2870
-	/* not used in RT2860 */
-	TXINFO_STRUC		TxInfo; // TxInfo
-#endif // RT2870 //
-	USHORT		HLen; // Header Length
-	USHORT		PLen; // Pattern Length
-	UCHAR 		Header[32]; // Header buffer
-	UCHAR		Pattern[32]; // Pattern buffer
-	USHORT		DLen; // Data Length
-	USHORT		seq;
-	UINT32		CID;
-	pid_t 		AtePid;
-	// counters
-	UINT32		U2M;
-	UINT32		OtherData;
-	UINT32		Beacon;
-	UINT32		OtherCount;
-	UINT32		TxAc0;
-	UINT32		TxAc1;
-	UINT32		TxAc2;
-	UINT32		TxAc3;
-	UINT32		TxHCCA;
-	UINT32		TxMgmt;
-	UINT32		RSSI0;
-	UINT32		RSSI1;
-	UINT32		RSSI2;
-	UINT32		SNR0;
-	UINT32		SNR1;
-	// control
-	//UINT32		Repeat; // Tx Cpu count
-	UCHAR		TxStatus; // task Tx status // 0 --> task is idle, 1 --> task is running
-#endif // RALINK_28xx_QA //
-}	ATE_INFO, *PATE_INFO;
-
-#ifdef RALINK_28xx_QA
-struct ate_racfghdr {
- 	UINT32		magic_no;
-	USHORT		command_type;
-	USHORT		command_id;
-	USHORT		length;
-	USHORT		sequence;
-	USHORT		status;
-	UCHAR		data[2046];
-}  __attribute__((packed));
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
-#ifdef DOT11_N_SUPPORT
-struct reordering_mpdu
-{
-	struct reordering_mpdu	*next;
-	PNDIS_PACKET			pPacket;		/* coverted to 802.3 frame */
-	int						Sequence;		/* sequence number of MPDU */
-	BOOLEAN					bAMSDU;
-};
-
-struct reordering_list
-{
-	struct reordering_mpdu *next;
-	int 	qlen;
-};
-
-struct reordering_mpdu_pool
-{
-	PVOID					mem;
-	NDIS_SPIN_LOCK			lock;
-	struct reordering_list 	freelist;
-};
-#endif // DOT11_N_SUPPORT //
-
-typedef struct 	_RSSI_SAMPLE {
-	CHAR			LastRssi0;             // last received RSSI
-	CHAR			LastRssi1;             // last received RSSI
-	CHAR			LastRssi2;             // last received RSSI
-	CHAR			AvgRssi0;
-	CHAR			AvgRssi1;
-	CHAR			AvgRssi2;
-	SHORT			AvgRssi0X8;
-	SHORT			AvgRssi1X8;
-	SHORT			AvgRssi2X8;
-} RSSI_SAMPLE;
-
-//
-//  Queue structure and macros
-//
-typedef struct  _QUEUE_ENTRY    {
-	struct _QUEUE_ENTRY     *Next;
-}   QUEUE_ENTRY, *PQUEUE_ENTRY;
-
-// Queue structure
-typedef struct  _QUEUE_HEADER   {
-	PQUEUE_ENTRY    Head;
-	PQUEUE_ENTRY    Tail;
-	ULONG           Number;
-}   QUEUE_HEADER, *PQUEUE_HEADER;
-
-#define InitializeQueueHeader(QueueHeader)              \
-{                                                       \
-	(QueueHeader)->Head = (QueueHeader)->Tail = NULL;   \
-	(QueueHeader)->Number = 0;                          \
-}
-
-#define RemoveHeadQueue(QueueHeader)                \
-(QueueHeader)->Head;                                \
-{                                                   \
-	PQUEUE_ENTRY pNext;                             \
-	if ((QueueHeader)->Head != NULL)				\
-	{												\
-		pNext = (QueueHeader)->Head->Next;          \
-		(QueueHeader)->Head = pNext;                \
-		if (pNext == NULL)                          \
-			(QueueHeader)->Tail = NULL;             \
-		(QueueHeader)->Number--;                    \
-	}												\
-}
-
-#define InsertHeadQueue(QueueHeader, QueueEntry)            \
-{                                                           \
-		((PQUEUE_ENTRY)QueueEntry)->Next = (QueueHeader)->Head; \
-		(QueueHeader)->Head = (PQUEUE_ENTRY)(QueueEntry);       \
-		if ((QueueHeader)->Tail == NULL)                        \
-			(QueueHeader)->Tail = (PQUEUE_ENTRY)(QueueEntry);   \
-		(QueueHeader)->Number++;                                \
-}
-
-#define InsertTailQueue(QueueHeader, QueueEntry)                \
-{                                                               \
-	((PQUEUE_ENTRY)QueueEntry)->Next = NULL;                    \
-	if ((QueueHeader)->Tail)                                    \
-		(QueueHeader)->Tail->Next = (PQUEUE_ENTRY)(QueueEntry); \
-	else                                                        \
-		(QueueHeader)->Head = (PQUEUE_ENTRY)(QueueEntry);       \
-	(QueueHeader)->Tail = (PQUEUE_ENTRY)(QueueEntry);           \
-	(QueueHeader)->Number++;                                    \
-}
-
-//
-//  Macros for flag and ref count operations
-//
-#define RTMP_SET_FLAG(_M, _F)       ((_M)->Flags |= (_F))
-#define RTMP_CLEAR_FLAG(_M, _F)     ((_M)->Flags &= ~(_F))
-#define RTMP_CLEAR_FLAGS(_M)        ((_M)->Flags = 0)
-#define RTMP_TEST_FLAG(_M, _F)      (((_M)->Flags & (_F)) != 0)
-#define RTMP_TEST_FLAGS(_M, _F)     (((_M)->Flags & (_F)) == (_F))
-
-#define OPSTATUS_SET_FLAG(_pAd, _F)     ((_pAd)->CommonCfg.OpStatusFlags |= (_F))
-#define OPSTATUS_CLEAR_FLAG(_pAd, _F)   ((_pAd)->CommonCfg.OpStatusFlags &= ~(_F))
-#define OPSTATUS_TEST_FLAG(_pAd, _F)    (((_pAd)->CommonCfg.OpStatusFlags & (_F)) != 0)
-
-#define CLIENT_STATUS_SET_FLAG(_pEntry,_F)      ((_pEntry)->ClientStatusFlags |= (_F))
-#define CLIENT_STATUS_CLEAR_FLAG(_pEntry,_F)    ((_pEntry)->ClientStatusFlags &= ~(_F))
-#define CLIENT_STATUS_TEST_FLAG(_pEntry,_F)     (((_pEntry)->ClientStatusFlags & (_F)) != 0)
-
-#define RX_FILTER_SET_FLAG(_pAd, _F)    ((_pAd)->CommonCfg.PacketFilter |= (_F))
-#define RX_FILTER_CLEAR_FLAG(_pAd, _F)  ((_pAd)->CommonCfg.PacketFilter &= ~(_F))
-#define RX_FILTER_TEST_FLAG(_pAd, _F)   (((_pAd)->CommonCfg.PacketFilter & (_F)) != 0)
-
-#ifdef CONFIG_STA_SUPPORT
-#define STA_NO_SECURITY_ON(_p)          (_p->StaCfg.WepStatus == Ndis802_11EncryptionDisabled)
-#define STA_WEP_ON(_p)                  (_p->StaCfg.WepStatus == Ndis802_11Encryption1Enabled)
-#define STA_TKIP_ON(_p)                 (_p->StaCfg.WepStatus == Ndis802_11Encryption2Enabled)
-#define STA_AES_ON(_p)                  (_p->StaCfg.WepStatus == Ndis802_11Encryption3Enabled)
-
-#define STA_TGN_WIFI_ON(_p)             (_p->StaCfg.bTGnWifiTest == TRUE)
-#endif // CONFIG_STA_SUPPORT //
-
-#define CKIP_KP_ON(_p)				((((_p)->StaCfg.CkipFlag) & 0x10) && ((_p)->StaCfg.bCkipCmicOn == TRUE))
-#define CKIP_CMIC_ON(_p)			((((_p)->StaCfg.CkipFlag) & 0x08) && ((_p)->StaCfg.bCkipCmicOn == TRUE))
-
-
-#define INC_RING_INDEX(_idx, _RingSize)    \
-{                                          \
-    (_idx) = (_idx+1) % (_RingSize);       \
-}
-
-// We will have a cost down version which mac version is 0x3090xxxx
-#define IS_RT3090(_pAd)				((((_pAd)->MACVersion & 0xffff0000) == 0x30710000) || (((_pAd)->MACVersion & 0xffff0000) == 0x30900000))
-
-#define IS_RT3070(_pAd)				(((_pAd)->MACVersion & 0xffff0000) == 0x30700000)
-#define IS_RT3071(_pAd)				(((_pAd)->MACVersion & 0xffff0000) == 0x30710000)
-#define IS_RT2070(_pAd)				(((_pAd)->RfIcType == RFIC_2020) || ((_pAd)->EFuseTag == 0x27))
-
-#define IS_RT30xx(_pAd)				(((_pAd)->MACVersion & 0xfff00000) == 0x30700000)
-
-#define RING_PACKET_INIT(_TxRing, _idx)    \
-{                                          \
-    _TxRing->Cell[_idx].pNdisPacket = NULL;                              \
-    _TxRing->Cell[_idx].pNextNdisPacket = NULL;                              \
-}
-
-#define TXDT_INIT(_TxD)    \
-{                                          \
-	NdisZeroMemory(_TxD, TXD_SIZE);	\
-	_TxD->DMADONE = 1;                              \
-}
-
-//Set last data segment
-#define RING_SET_LASTDS(_TxD, _IsSD0)    \
-{                                          \
-    if (_IsSD0) {_TxD->LastSec0 = 1;}     \
-    else {_TxD->LastSec1 = 1;}     \
-}
-
-// Increase TxTsc value for next transmission
-// TODO:
-// When i==6, means TSC has done one full cycle, do re-keying stuff follow specs
-// Should send a special event microsoft defined to request re-key
-#define INC_TX_TSC(_tsc)                                \
-{                                                       \
-    int i=0;                                            \
-    while (++_tsc[i] == 0x0)                            \
-    {                                                   \
-        i++;                                            \
-        if (i == 6)                                     \
-            break;                                      \
-    }                                                   \
-}
-
-#ifdef DOT11_N_SUPPORT
-// StaActive.SupportedHtPhy.MCSSet is copied from AP beacon.  Don't need to update here.
-#define COPY_HTSETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(_pAd)                                 \
-{                                                                                       \
-	_pAd->StaActive.SupportedHtPhy.ChannelWidth = _pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth;      \
-	_pAd->StaActive.SupportedHtPhy.MimoPs = _pAd->MlmeAux.HtCapability.HtCapInfo.MimoPs;      \
-	_pAd->StaActive.SupportedHtPhy.GF = _pAd->MlmeAux.HtCapability.HtCapInfo.GF;      \
-	_pAd->StaActive.SupportedHtPhy.ShortGIfor20 = _pAd->MlmeAux.HtCapability.HtCapInfo.ShortGIfor20;      \
-	_pAd->StaActive.SupportedHtPhy.ShortGIfor40 = _pAd->MlmeAux.HtCapability.HtCapInfo.ShortGIfor40;      \
-	_pAd->StaActive.SupportedHtPhy.TxSTBC = _pAd->MlmeAux.HtCapability.HtCapInfo.TxSTBC;      \
-	_pAd->StaActive.SupportedHtPhy.RxSTBC = _pAd->MlmeAux.HtCapability.HtCapInfo.RxSTBC;      \
-	_pAd->StaActive.SupportedHtPhy.ExtChanOffset = _pAd->MlmeAux.AddHtInfo.AddHtInfo.ExtChanOffset;      \
-	_pAd->StaActive.SupportedHtPhy.RecomWidth = _pAd->MlmeAux.AddHtInfo.AddHtInfo.RecomWidth;      \
-	_pAd->StaActive.SupportedHtPhy.OperaionMode = _pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode;      \
-	_pAd->StaActive.SupportedHtPhy.NonGfPresent = _pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent;      \
-	NdisMoveMemory((_pAd)->MacTab.Content[BSSID_WCID].HTCapability.MCSSet, (_pAd)->StaActive.SupportedPhyInfo.MCSSet, sizeof(UCHAR) * 16);\
-}
-
-#define COPY_AP_HTSETTINGS_FROM_BEACON(_pAd, _pHtCapability)                                 \
-{                                                                                       \
-	_pAd->MacTab.Content[BSSID_WCID].AMsduSize = (UCHAR)(_pHtCapability->HtCapInfo.AMsduSize);	\
-	_pAd->MacTab.Content[BSSID_WCID].MmpsMode= (UCHAR)(_pHtCapability->HtCapInfo.MimoPs);	\
-	_pAd->MacTab.Content[BSSID_WCID].MaxRAmpduFactor = (UCHAR)(_pHtCapability->HtCapParm.MaxRAmpduFactor);	\
-}
-#endif // DOT11_N_SUPPORT //
-
-//
-// MACRO for 32-bit PCI register read / write
-//
-// Usage : RTMP_IO_READ32(
-//              PRTMP_ADAPTER pAd,
-//              ULONG Register_Offset,
-//              PULONG  pValue)
-//
-//         RTMP_IO_WRITE32(
-//              PRTMP_ADAPTER pAd,
-//              ULONG Register_Offset,
-//              ULONG Value)
-//
-
-//
-// BBP & RF are using indirect access. Before write any value into it.
-// We have to make sure there is no outstanding command pending via checking busy bit.
-//
-#define MAX_BUSY_COUNT  100         // Number of retry before failing access BBP & RF indirect register
-//
-
-#ifdef RT2870
-#define RTMP_RF_IO_WRITE32(_A, _V)                 RTUSBWriteRFRegister(_A, _V)
-#define RTMP_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV)   RTUSBReadBBPRegister(_A, _I, _pV)
-#define RTMP_BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V)   RTUSBWriteBBPRegister(_A, _I, _V)
-
-#define BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V)			RTUSBWriteBBPRegister(_A, _I, _V)
-#define BBP_IO_READ8_BY_REG_ID(_A, _I, _pV)   		RTUSBReadBBPRegister(_A, _I, _pV)
-#endif // RT2870 //
-
-#ifdef RT30xx
-#define RTMP_RF_IO_READ8_BY_REG_ID(_A, _I, _pV)    RT30xxReadRFRegister(_A, _I, _pV)
-#define RTMP_RF_IO_WRITE8_BY_REG_ID(_A, _I, _V)    RT30xxWriteRFRegister(_A, _I, _V)
-#endif // RT30xx //
-
-#define     MAP_CHANNEL_ID_TO_KHZ(ch, khz)  {               \
-                switch (ch)                                 \
-                {                                           \
-                    case 1:     khz = 2412000;   break;     \
-                    case 2:     khz = 2417000;   break;     \
-                    case 3:     khz = 2422000;   break;     \
-                    case 4:     khz = 2427000;   break;     \
-                    case 5:     khz = 2432000;   break;     \
-                    case 6:     khz = 2437000;   break;     \
-                    case 7:     khz = 2442000;   break;     \
-                    case 8:     khz = 2447000;   break;     \
-                    case 9:     khz = 2452000;   break;     \
-                    case 10:    khz = 2457000;   break;     \
-                    case 11:    khz = 2462000;   break;     \
-                    case 12:    khz = 2467000;   break;     \
-                    case 13:    khz = 2472000;   break;     \
-                    case 14:    khz = 2484000;   break;     \
-                    case 36:  /* UNII */  khz = 5180000;   break;     \
-                    case 40:  /* UNII */  khz = 5200000;   break;     \
-                    case 44:  /* UNII */  khz = 5220000;   break;     \
-                    case 48:  /* UNII */  khz = 5240000;   break;     \
-                    case 52:  /* UNII */  khz = 5260000;   break;     \
-                    case 56:  /* UNII */  khz = 5280000;   break;     \
-                    case 60:  /* UNII */  khz = 5300000;   break;     \
-                    case 64:  /* UNII */  khz = 5320000;   break;     \
-                    case 149: /* UNII */  khz = 5745000;   break;     \
-                    case 153: /* UNII */  khz = 5765000;   break;     \
-                    case 157: /* UNII */  khz = 5785000;   break;     \
-                    case 161: /* UNII */  khz = 5805000;   break;     \
-                    case 165: /* UNII */  khz = 5825000;   break;     \
-                    case 100: /* HiperLAN2 */  khz = 5500000;   break;     \
-                    case 104: /* HiperLAN2 */  khz = 5520000;   break;     \
-                    case 108: /* HiperLAN2 */  khz = 5540000;   break;     \
-                    case 112: /* HiperLAN2 */  khz = 5560000;   break;     \
-                    case 116: /* HiperLAN2 */  khz = 5580000;   break;     \
-                    case 120: /* HiperLAN2 */  khz = 5600000;   break;     \
-                    case 124: /* HiperLAN2 */  khz = 5620000;   break;     \
-                    case 128: /* HiperLAN2 */  khz = 5640000;   break;     \
-                    case 132: /* HiperLAN2 */  khz = 5660000;   break;     \
-                    case 136: /* HiperLAN2 */  khz = 5680000;   break;     \
-                    case 140: /* HiperLAN2 */  khz = 5700000;   break;     \
-                    case 34:  /* Japan MMAC */   khz = 5170000;   break;   \
-                    case 38:  /* Japan MMAC */   khz = 5190000;   break;   \
-                    case 42:  /* Japan MMAC */   khz = 5210000;   break;   \
-                    case 46:  /* Japan MMAC */   khz = 5230000;   break;   \
-                    case 184: /* Japan */   khz = 4920000;   break;   \
-                    case 188: /* Japan */   khz = 4940000;   break;   \
-                    case 192: /* Japan */   khz = 4960000;   break;   \
-                    case 196: /* Japan */   khz = 4980000;   break;   \
-                    case 208: /* Japan, means J08 */   khz = 5040000;   break;   \
-                    case 212: /* Japan, means J12 */   khz = 5060000;   break;   \
-                    case 216: /* Japan, means J16 */   khz = 5080000;   break;   \
-                    default:    khz = 2412000;   break;     \
-                }                                           \
-            }
-
-#define     MAP_KHZ_TO_CHANNEL_ID(khz, ch)  {               \
-                switch (khz)                                \
-                {                                           \
-                    case 2412000:    ch = 1;     break;     \
-                    case 2417000:    ch = 2;     break;     \
-                    case 2422000:    ch = 3;     break;     \
-                    case 2427000:    ch = 4;     break;     \
-                    case 2432000:    ch = 5;     break;     \
-                    case 2437000:    ch = 6;     break;     \
-                    case 2442000:    ch = 7;     break;     \
-                    case 2447000:    ch = 8;     break;     \
-                    case 2452000:    ch = 9;     break;     \
-                    case 2457000:    ch = 10;    break;     \
-                    case 2462000:    ch = 11;    break;     \
-                    case 2467000:    ch = 12;    break;     \
-                    case 2472000:    ch = 13;    break;     \
-                    case 2484000:    ch = 14;    break;     \
-                    case 5180000:    ch = 36;  /* UNII */  break;     \
-                    case 5200000:    ch = 40;  /* UNII */  break;     \
-                    case 5220000:    ch = 44;  /* UNII */  break;     \
-                    case 5240000:    ch = 48;  /* UNII */  break;     \
-                    case 5260000:    ch = 52;  /* UNII */  break;     \
-                    case 5280000:    ch = 56;  /* UNII */  break;     \
-                    case 5300000:    ch = 60;  /* UNII */  break;     \
-                    case 5320000:    ch = 64;  /* UNII */  break;     \
-                    case 5745000:    ch = 149; /* UNII */  break;     \
-                    case 5765000:    ch = 153; /* UNII */  break;     \
-                    case 5785000:    ch = 157; /* UNII */  break;     \
-                    case 5805000:    ch = 161; /* UNII */  break;     \
-                    case 5825000:    ch = 165; /* UNII */  break;     \
-                    case 5500000:    ch = 100; /* HiperLAN2 */  break;     \
-                    case 5520000:    ch = 104; /* HiperLAN2 */  break;     \
-                    case 5540000:    ch = 108; /* HiperLAN2 */  break;     \
-                    case 5560000:    ch = 112; /* HiperLAN2 */  break;     \
-                    case 5580000:    ch = 116; /* HiperLAN2 */  break;     \
-                    case 5600000:    ch = 120; /* HiperLAN2 */  break;     \
-                    case 5620000:    ch = 124; /* HiperLAN2 */  break;     \
-                    case 5640000:    ch = 128; /* HiperLAN2 */  break;     \
-                    case 5660000:    ch = 132; /* HiperLAN2 */  break;     \
-                    case 5680000:    ch = 136; /* HiperLAN2 */  break;     \
-                    case 5700000:    ch = 140; /* HiperLAN2 */  break;     \
-                    case 5170000:    ch = 34;  /* Japan MMAC */   break;   \
-                    case 5190000:    ch = 38;  /* Japan MMAC */   break;   \
-                    case 5210000:    ch = 42;  /* Japan MMAC */   break;   \
-                    case 5230000:    ch = 46;  /* Japan MMAC */   break;   \
-                    case 4920000:    ch = 184; /* Japan */  break;   \
-                    case 4940000:    ch = 188; /* Japan */  break;   \
-                    case 4960000:    ch = 192; /* Japan */  break;   \
-                    case 4980000:    ch = 196; /* Japan */  break;   \
-                    case 5040000:    ch = 208; /* Japan, means J08 */  break;   \
-                    case 5060000:    ch = 212; /* Japan, means J12 */  break;   \
-                    case 5080000:    ch = 216; /* Japan, means J16 */  break;   \
-                    default:         ch = 1;     break;     \
-                }                                           \
-            }
-
-//
-// Common fragment list structure -  Identical to the scatter gather frag list structure
-//
-//#define RTMP_SCATTER_GATHER_ELEMENT         SCATTER_GATHER_ELEMENT
-//#define PRTMP_SCATTER_GATHER_ELEMENT        PSCATTER_GATHER_ELEMENT
-#define NIC_MAX_PHYS_BUF_COUNT              8
-
-typedef struct _RTMP_SCATTER_GATHER_ELEMENT {
-    PVOID		Address;
-    ULONG		Length;
-    PULONG		Reserved;
-} RTMP_SCATTER_GATHER_ELEMENT, *PRTMP_SCATTER_GATHER_ELEMENT;
-
-
-typedef struct _RTMP_SCATTER_GATHER_LIST {
-    ULONG  NumberOfElements;
-    PULONG Reserved;
-    RTMP_SCATTER_GATHER_ELEMENT Elements[NIC_MAX_PHYS_BUF_COUNT];
-} RTMP_SCATTER_GATHER_LIST, *PRTMP_SCATTER_GATHER_LIST;
-
-//
-//  Some utility macros
-//
-#ifndef min
-#define min(_a, _b)     (((_a) < (_b)) ? (_a) : (_b))
-#endif
-
-#ifndef max
-#define max(_a, _b)     (((_a) > (_b)) ? (_a) : (_b))
-#endif
-
-#define GET_LNA_GAIN(_pAd)	((_pAd->LatchRfRegs.Channel <= 14) ? (_pAd->BLNAGain) : ((_pAd->LatchRfRegs.Channel <= 64) ? (_pAd->ALNAGain0) : ((_pAd->LatchRfRegs.Channel <= 128) ? (_pAd->ALNAGain1) : (_pAd->ALNAGain2))))
-
-#define INC_COUNTER64(Val)          (Val.QuadPart++)
-
-#define INFRA_ON(_p)                (OPSTATUS_TEST_FLAG(_p, fOP_STATUS_INFRA_ON))
-#define ADHOC_ON(_p)                (OPSTATUS_TEST_FLAG(_p, fOP_STATUS_ADHOC_ON))
-#define MONITOR_ON(_p)              (((_p)->StaCfg.BssType) == BSS_MONITOR)
-#define IDLE_ON(_p)                 (!INFRA_ON(_p) && !ADHOC_ON(_p))
-
-// Check LEAP & CCKM flags
-#define LEAP_ON(_p)                 (((_p)->StaCfg.LeapAuthMode) == CISCO_AuthModeLEAP)
-#define LEAP_CCKM_ON(_p)            ((((_p)->StaCfg.LeapAuthMode) == CISCO_AuthModeLEAP) && ((_p)->StaCfg.LeapAuthInfo.CCKM == TRUE))
-
-// if orginal Ethernet frame contains no LLC/SNAP, then an extra LLC/SNAP encap is required
-#define EXTRA_LLCSNAP_ENCAP_FROM_PKT_START(_pBufVA, _pExtraLlcSnapEncap)		\
-{																\
-	if (((*(_pBufVA + 12) << 8) + *(_pBufVA + 13)) > 1500)		\
-	{															\
-		_pExtraLlcSnapEncap = SNAP_802_1H;						\
-		if (NdisEqualMemory(IPX, _pBufVA + 12, 2) || 			\
-			NdisEqualMemory(APPLE_TALK, _pBufVA + 12, 2))		\
-		{														\
-			_pExtraLlcSnapEncap = SNAP_BRIDGE_TUNNEL;			\
-		}														\
-	}															\
-	else														\
-	{															\
-		_pExtraLlcSnapEncap = NULL;								\
-	}															\
-}
-
-// New Define for new Tx Path.
-#define EXTRA_LLCSNAP_ENCAP_FROM_PKT_OFFSET(_pBufVA, _pExtraLlcSnapEncap)	\
-{																\
-	if (((*(_pBufVA) << 8) + *(_pBufVA + 1)) > 1500)			\
-	{															\
-		_pExtraLlcSnapEncap = SNAP_802_1H;						\
-		if (NdisEqualMemory(IPX, _pBufVA, 2) || 				\
-			NdisEqualMemory(APPLE_TALK, _pBufVA, 2))			\
-		{														\
-			_pExtraLlcSnapEncap = SNAP_BRIDGE_TUNNEL;			\
-		}														\
-	}															\
-	else														\
-	{															\
-		_pExtraLlcSnapEncap = NULL;								\
-	}															\
-}
-
-
-#define MAKE_802_3_HEADER(_p, _pMac1, _pMac2, _pType)                   \
-{                                                                       \
-    NdisMoveMemory(_p, _pMac1, MAC_ADDR_LEN);                           \
-    NdisMoveMemory((_p + MAC_ADDR_LEN), _pMac2, MAC_ADDR_LEN);          \
-    NdisMoveMemory((_p + MAC_ADDR_LEN * 2), _pType, LENGTH_802_3_TYPE); \
-}
-
-// if pData has no LLC/SNAP (neither RFC1042 nor Bridge tunnel), keep it that way.
-// else if the received frame is LLC/SNAP-encaped IPX or APPLETALK, preserve the LLC/SNAP field
-// else remove the LLC/SNAP field from the result Ethernet frame
-// Patch for WHQL only, which did not turn on Netbios but use IPX within its payload
-// Note:
-//     _pData & _DataSize may be altered (remove 8-byte LLC/SNAP) by this MACRO
-//     _pRemovedLLCSNAP: pointer to removed LLC/SNAP; NULL is not removed
-#define CONVERT_TO_802_3(_p8023hdr, _pDA, _pSA, _pData, _DataSize, _pRemovedLLCSNAP)      \
-{                                                                       \
-    char LLC_Len[2];                                                    \
-                                                                        \
-    _pRemovedLLCSNAP = NULL;                                            \
-    if (NdisEqualMemory(SNAP_802_1H, _pData, 6)  ||                     \
-        NdisEqualMemory(SNAP_BRIDGE_TUNNEL, _pData, 6))                 \
-    {                                                                   \
-        PUCHAR pProto = _pData + 6;                                     \
-                                                                        \
-        if ((NdisEqualMemory(IPX, pProto, 2) || NdisEqualMemory(APPLE_TALK, pProto, 2)) &&  \
-            NdisEqualMemory(SNAP_802_1H, _pData, 6))                    \
-        {                                                               \
-            LLC_Len[0] = (UCHAR)(_DataSize / 256);                      \
-            LLC_Len[1] = (UCHAR)(_DataSize % 256);                      \
-            MAKE_802_3_HEADER(_p8023hdr, _pDA, _pSA, LLC_Len);          \
-        }                                                               \
-        else                                                            \
-        {                                                               \
-            MAKE_802_3_HEADER(_p8023hdr, _pDA, _pSA, pProto);           \
-            _pRemovedLLCSNAP = _pData;                                  \
-            _DataSize -= LENGTH_802_1_H;                                \
-            _pData += LENGTH_802_1_H;                                   \
-        }                                                               \
-    }                                                                   \
-    else                                                                \
-    {                                                                   \
-        LLC_Len[0] = (UCHAR)(_DataSize / 256);                          \
-        LLC_Len[1] = (UCHAR)(_DataSize % 256);                          \
-        MAKE_802_3_HEADER(_p8023hdr, _pDA, _pSA, LLC_Len);              \
-    }                                                                   \
-}
-
-#define SWITCH_AB( _pAA, _pBB)    \
-{                                                                           \
-    PVOID pCC;                                                          \
-    pCC = _pBB;                                                 \
-    _pBB = _pAA;                                                 \
-    _pAA = pCC;                                                 \
-}
-
-// Enqueue this frame to MLME engine
-// We need to enqueue the whole frame because MLME need to pass data type
-// information from 802.11 header
-#ifdef RT2870
-#define REPORT_MGMT_FRAME_TO_MLME(_pAd, Wcid, _pFrame, _FrameSize, _Rssi0, _Rssi1, _Rssi2, _PlcpSignal)        \
-{                                                                                       \
-    UINT32 High32TSF=0, Low32TSF=0;                                                          \
-    MlmeEnqueueForRecv(_pAd, Wcid, High32TSF, Low32TSF, (UCHAR)_Rssi0, (UCHAR)_Rssi1,(UCHAR)_Rssi2,_FrameSize, _pFrame, (UCHAR)_PlcpSignal);   \
-}
-#endif // RT2870 //
-
-#ifdef RT30xx
-//Need to collect each ant's rssi concurrently
-//rssi1 is report to pair2 Ant and rss2 is reprot to pair1 Ant when 4 Ant
-#define COLLECT_RX_ANTENNA_AVERAGE_RSSI(_pAd, _rssi1, _rssi2)					\
-{																				\
-	SHORT	AvgRssi;															\
-	UCHAR	UsedAnt;															\
-	if (_pAd->RxAnt.EvaluatePeriod == 0)									\
-	{																		\
-		UsedAnt = _pAd->RxAnt.Pair1PrimaryRxAnt;							\
-		AvgRssi = _pAd->RxAnt.Pair1AvgRssi[UsedAnt];						\
-		if (AvgRssi < 0)													\
-			AvgRssi = AvgRssi - (AvgRssi >> 3) + _rssi1;					\
-		else																\
-			AvgRssi = _rssi1 << 3;											\
-		_pAd->RxAnt.Pair1AvgRssi[UsedAnt] = AvgRssi;						\
-	}																		\
-	else																	\
-	{																		\
-		UsedAnt = _pAd->RxAnt.Pair1SecondaryRxAnt;							\
-		AvgRssi = _pAd->RxAnt.Pair1AvgRssi[UsedAnt];						\
-		if ((AvgRssi < 0) && (_pAd->RxAnt.FirstPktArrivedWhenEvaluate))		\
-			AvgRssi = AvgRssi - (AvgRssi >> 3) + _rssi1;					\
-		else																\
-		{																	\
-			_pAd->RxAnt.FirstPktArrivedWhenEvaluate = TRUE;					\
-			AvgRssi = _rssi1 << 3;											\
-		}																	\
-		_pAd->RxAnt.Pair1AvgRssi[UsedAnt] = AvgRssi;						\
-		_pAd->RxAnt.RcvPktNumWhenEvaluate++;								\
-	}																		\
-}
-#endif // RT30xx //
-
-
-#define NDIS_QUERY_BUFFER(_NdisBuf, _ppVA, _pBufLen)                    \
-    NdisQueryBuffer(_NdisBuf, _ppVA, _pBufLen)
-
-#define MAC_ADDR_EQUAL(pAddr1,pAddr2)           RTMPEqualMemory((PVOID)(pAddr1), (PVOID)(pAddr2), MAC_ADDR_LEN)
-#define SSID_EQUAL(ssid1, len1, ssid2, len2)    ((len1==len2) && (RTMPEqualMemory(ssid1, ssid2, len1)))
-
-//
-// Check if it is Japan W53(ch52,56,60,64) channel.
-//
-#define JapanChannelCheck(channel)  ((channel == 52) || (channel == 56) || (channel == 60) || (channel == 64))
-
-#ifdef CONFIG_STA_SUPPORT
-#define STA_PORT_SECURED(_pAd) \
-{ \
-	_pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; \
-	NdisAcquireSpinLock(&_pAd->MacTabLock); \
-	_pAd->MacTab.Content[BSSID_WCID].PortSecured = _pAd->StaCfg.PortSecured; \
-	NdisReleaseSpinLock(&_pAd->MacTabLock); \
-}
-#endif // CONFIG_STA_SUPPORT //
-
-
-//
-// Register set pair for initialzation register set definition
-//
-typedef struct  _RTMP_REG_PAIR
-{
-	ULONG   Register;
-	ULONG   Value;
-} RTMP_REG_PAIR, *PRTMP_REG_PAIR;
-
-typedef struct  _REG_PAIR
-{
-	UCHAR   Register;
-	UCHAR   Value;
-} REG_PAIR, *PREG_PAIR;
-
-//
-// Register set pair for initialzation register set definition
-//
-typedef struct  _RTMP_RF_REGS
-{
-	UCHAR   Channel;
-	ULONG   R1;
-	ULONG   R2;
-	ULONG   R3;
-	ULONG   R4;
-} RTMP_RF_REGS, *PRTMP_RF_REGS;
-
-typedef struct _FREQUENCY_ITEM {
-	UCHAR	Channel;
-	UCHAR	N;
-	UCHAR	R;
-	UCHAR	K;
-} FREQUENCY_ITEM, *PFREQUENCY_ITEM;
-
-//
-//  Data buffer for DMA operation, the buffer must be contiguous physical memory
-//  Both DMA to / from CPU use the same structure.
-//
-typedef struct  _RTMP_DMABUF
-{
-	ULONG                   AllocSize;
-	PVOID                   AllocVa;            // TxBuf virtual address
-	NDIS_PHYSICAL_ADDRESS   AllocPa;            // TxBuf physical address
-} RTMP_DMABUF, *PRTMP_DMABUF;
-
-
-typedef	union	_HEADER_802_11_SEQ{
-#ifdef RT_BIG_ENDIAN
-    struct {
-   	USHORT			Sequence:12;
-	USHORT			Frag:4;
-    }   field;
-#else
-    struct {
-	USHORT			Frag:4;
-	USHORT			Sequence:12;
-    }   field;
-#endif
-    USHORT           value;
-}	HEADER_802_11_SEQ, *PHEADER_802_11_SEQ;
-
-//
-//  Data buffer for DMA operation, the buffer must be contiguous physical memory
-//  Both DMA to / from CPU use the same structure.
-//
-typedef struct  _RTMP_REORDERBUF
-{
-	BOOLEAN			IsFull;
-	PVOID                   AllocVa;            // TxBuf virtual address
-	UCHAR			Header802_3[14];
-	HEADER_802_11_SEQ			Sequence;	//support compressed bitmap BA, so no consider fragment in BA
-	UCHAR 		DataOffset;
-	USHORT 		Datasize;
-	ULONG                   AllocSize;
-#ifdef RT2870
-	PUCHAR					AllocPa;
-#endif // RT2870 //
-}   RTMP_REORDERBUF, *PRTMP_REORDERBUF;
-
-//
-// Control block (Descriptor) for all ring descriptor DMA operation, buffer must be
-// contiguous physical memory. NDIS_PACKET stored the binding Rx packet descriptor
-// which won't be released, driver has to wait until upper layer return the packet
-// before giveing up this rx ring descriptor to ASIC. NDIS_BUFFER is assocaited pair
-// to describe the packet buffer. For Tx, NDIS_PACKET stored the tx packet descriptor
-// which driver should ACK upper layer when the tx is physically done or failed.
-//
-typedef struct _RTMP_DMACB
-{
-	ULONG                   AllocSize;          // Control block size
-	PVOID                   AllocVa;            // Control block virtual address
-	NDIS_PHYSICAL_ADDRESS   AllocPa;            // Control block physical address
-	PNDIS_PACKET pNdisPacket;
-	PNDIS_PACKET pNextNdisPacket;
-
-	RTMP_DMABUF             DmaBuf;             // Associated DMA buffer structure
-} RTMP_DMACB, *PRTMP_DMACB;
-
-typedef struct _RTMP_TX_BUF
-{
-	PQUEUE_ENTRY    Next;
-	UCHAR           Index;
-	ULONG                   AllocSize;          // Control block size
-	PVOID                   AllocVa;            // Control block virtual address
-	NDIS_PHYSICAL_ADDRESS   AllocPa;            // Control block physical address
-} RTMP_TXBUF, *PRTMP_TXBUF;
-
-typedef struct _RTMP_RX_BUF
-{
-	BOOLEAN           InUse;
-	ULONG           	ByBaRecIndex;
-	RTMP_REORDERBUF	MAP_RXBuf[MAX_RX_REORDERBUF];
-} RTMP_RXBUF, *PRTMP_RXBUF;
-typedef struct _RTMP_TX_RING
-{
-	RTMP_DMACB  Cell[TX_RING_SIZE];
-	UINT32		TxCpuIdx;
-	UINT32		TxDmaIdx;
-	UINT32		TxSwFreeIdx; 	// software next free tx index
-} RTMP_TX_RING, *PRTMP_TX_RING;
-
-typedef struct _RTMP_RX_RING
-{
-	RTMP_DMACB  Cell[RX_RING_SIZE];
-	UINT32		RxCpuIdx;
-	UINT32		RxDmaIdx;
-	INT32		RxSwReadIdx; 	// software next read index
-} RTMP_RX_RING, *PRTMP_RX_RING;
-
-typedef struct _RTMP_MGMT_RING
-{
-	RTMP_DMACB  Cell[MGMT_RING_SIZE];
-	UINT32		TxCpuIdx;
-	UINT32		TxDmaIdx;
-	UINT32		TxSwFreeIdx; // software next free tx index
-} RTMP_MGMT_RING, *PRTMP_MGMT_RING;
-
-//
-//  Statistic counter structure
-//
-typedef struct _COUNTER_802_3
-{
-	// General Stats
-	ULONG       GoodTransmits;
-	ULONG       GoodReceives;
-	ULONG       TxErrors;
-	ULONG       RxErrors;
-	ULONG       RxNoBuffer;
-
-	// Ethernet Stats
-	ULONG       RcvAlignmentErrors;
-	ULONG       OneCollision;
-	ULONG       MoreCollisions;
-
-} COUNTER_802_3, *PCOUNTER_802_3;
-
-typedef struct _COUNTER_802_11 {
-	ULONG           Length;
-	LARGE_INTEGER   LastTransmittedFragmentCount;
-	LARGE_INTEGER   TransmittedFragmentCount;
-	LARGE_INTEGER   MulticastTransmittedFrameCount;
-	LARGE_INTEGER   FailedCount;
-	LARGE_INTEGER   RetryCount;
-	LARGE_INTEGER   MultipleRetryCount;
-	LARGE_INTEGER   RTSSuccessCount;
-	LARGE_INTEGER   RTSFailureCount;
-	LARGE_INTEGER   ACKFailureCount;
-	LARGE_INTEGER   FrameDuplicateCount;
-	LARGE_INTEGER   ReceivedFragmentCount;
-	LARGE_INTEGER   MulticastReceivedFrameCount;
-	LARGE_INTEGER   FCSErrorCount;
-} COUNTER_802_11, *PCOUNTER_802_11;
-
-typedef struct _COUNTER_RALINK {
-	ULONG           TransmittedByteCount;   // both successful and failure, used to calculate TX throughput
-	ULONG           ReceivedByteCount;      // both CRC okay and CRC error, used to calculate RX throughput
-	ULONG           BeenDisassociatedCount;
-	ULONG           BadCQIAutoRecoveryCount;
-	ULONG           PoorCQIRoamingCount;
-	ULONG           MgmtRingFullCount;
-	ULONG           RxCountSinceLastNULL;
-	ULONG           RxCount;
-	ULONG           RxRingErrCount;
-	ULONG           KickTxCount;
-	ULONG           TxRingErrCount;
-	LARGE_INTEGER   RealFcsErrCount;
-	ULONG           PendingNdisPacketCount;
-
-	ULONG           OneSecOsTxCount[NUM_OF_TX_RING];
-	ULONG           OneSecDmaDoneCount[NUM_OF_TX_RING];
-	UINT32          OneSecTxDoneCount;
-	ULONG           OneSecRxCount;
-	UINT32          OneSecTxAggregationCount;
-	UINT32          OneSecRxAggregationCount;
-
-	UINT32   		OneSecFrameDuplicateCount;
-
-#ifdef RT2870
-	ULONG           OneSecTransmittedByteCount;   // both successful and failure, used to calculate TX throughput
-#endif // RT2870 //
-
-	UINT32          OneSecTxNoRetryOkCount;
-	UINT32          OneSecTxRetryOkCount;
-	UINT32          OneSecTxFailCount;
-	UINT32          OneSecFalseCCACnt;      // CCA error count, for debug purpose, might move to global counter
-	UINT32          OneSecRxOkCnt;          // RX without error
-	UINT32          OneSecRxOkDataCnt;      // unicast-to-me DATA frame count
-	UINT32          OneSecRxFcsErrCnt;      // CRC error
-	UINT32          OneSecBeaconSentCnt;
-	UINT32          LastOneSecTotalTxCount; // OneSecTxNoRetryOkCount + OneSecTxRetryOkCount + OneSecTxFailCount
-	UINT32          LastOneSecRxOkDataCnt;  // OneSecRxOkDataCnt
-	ULONG		DuplicateRcv;
-	ULONG		TxAggCount;
-	ULONG		TxNonAggCount;
-	ULONG		TxAgg1MPDUCount;
-	ULONG		TxAgg2MPDUCount;
-	ULONG		TxAgg3MPDUCount;
-	ULONG		TxAgg4MPDUCount;
-	ULONG		TxAgg5MPDUCount;
-	ULONG		TxAgg6MPDUCount;
-	ULONG		TxAgg7MPDUCount;
-	ULONG		TxAgg8MPDUCount;
-	ULONG		TxAgg9MPDUCount;
-	ULONG		TxAgg10MPDUCount;
-	ULONG		TxAgg11MPDUCount;
-	ULONG		TxAgg12MPDUCount;
-	ULONG		TxAgg13MPDUCount;
-	ULONG		TxAgg14MPDUCount;
-	ULONG		TxAgg15MPDUCount;
-	ULONG		TxAgg16MPDUCount;
-
-	LARGE_INTEGER       TransmittedOctetsInAMSDU;
-	LARGE_INTEGER       TransmittedAMSDUCount;
-	LARGE_INTEGER       ReceivedOctesInAMSDUCount;
-	LARGE_INTEGER       ReceivedAMSDUCount;
-	LARGE_INTEGER       TransmittedAMPDUCount;
-	LARGE_INTEGER       TransmittedMPDUsInAMPDUCount;
-	LARGE_INTEGER       TransmittedOctetsInAMPDUCount;
-	LARGE_INTEGER       MPDUInReceivedAMPDUCount;
-} COUNTER_RALINK, *PCOUNTER_RALINK;
-
-typedef struct _PID_COUNTER {
-	ULONG           TxAckRequiredCount;      // CRC error
-	ULONG           TxAggreCount;
-	ULONG           TxSuccessCount; // OneSecTxNoRetryOkCount + OneSecTxRetryOkCount + OneSecTxFailCount
-	ULONG		LastSuccessRate;
-} PID_COUNTER, *PPID_COUNTER;
-
-typedef struct _COUNTER_DRS {
-	// to record the each TX rate's quality. 0 is best, the bigger the worse.
-	USHORT          TxQuality[MAX_STEP_OF_TX_RATE_SWITCH];
-	UCHAR           PER[MAX_STEP_OF_TX_RATE_SWITCH];
-	UCHAR           TxRateUpPenalty;      // extra # of second penalty due to last unstable condition
-	ULONG           CurrTxRateStableTime; // # of second in current TX rate
-	BOOLEAN         fNoisyEnvironment;
-	BOOLEAN         fLastSecAccordingRSSI;
-	UCHAR           LastSecTxRateChangeAction; // 0: no change, 1:rate UP, 2:rate down
-	UCHAR			LastTimeTxRateChangeAction; //Keep last time value of LastSecTxRateChangeAction
-	ULONG			LastTxOkCount;
-} COUNTER_DRS, *PCOUNTER_DRS;
-
-//
-//  Arcfour Structure Added by PaulWu
-//
-typedef struct  _ARCFOUR
-{
-	UINT            X;
-	UINT            Y;
-	UCHAR           STATE[256];
-} ARCFOURCONTEXT, *PARCFOURCONTEXT;
-
-// MIMO Tx parameter, ShortGI, MCS, STBC, etc.  these are fields in TXWI too. just copy to TXWI.
-typedef struct  _RECEIVE_SETTING {
-#ifdef RT_BIG_ENDIAN
-	USHORT		MIMO:1;
-	USHORT		OFDM:1;
-	USHORT		rsv:3;
-	USHORT		STBC:2;	//SPACE
-	USHORT		ShortGI:1;
-	USHORT		Mode:2;	//channel bandwidth 20MHz or 40 MHz
-	USHORT   	NumOfRX:2;                 // MIMO. WE HAVE 3R
-#else
-	USHORT   	NumOfRX:2;                 // MIMO. WE HAVE 3R
-	USHORT		Mode:2;	//channel bandwidth 20MHz or 40 MHz
-	USHORT		ShortGI:1;
-	USHORT		STBC:2;	//SPACE
-	USHORT		rsv:3;
-	USHORT		OFDM:1;
-	USHORT		MIMO:1;
-#endif
- } RECEIVE_SETTING, *PRECEIVE_SETTING;
-
-// Shared key data structure
-typedef struct  _WEP_KEY {
-	UCHAR   KeyLen;                     // Key length for each key, 0: entry is invalid
-	UCHAR   Key[MAX_LEN_OF_KEY];        // right now we implement 4 keys, 128 bits max
-} WEP_KEY, *PWEP_KEY;
-
-typedef struct _CIPHER_KEY {
-	UCHAR   Key[16];            // right now we implement 4 keys, 128 bits max
-	UCHAR   RxMic[8];			// make alignment
-	UCHAR   TxMic[8];
-	UCHAR   TxTsc[6];           // 48bit TSC value
-	UCHAR   RxTsc[6];           // 48bit TSC value
-	UCHAR   CipherAlg;          // 0-none, 1:WEP64, 2:WEP128, 3:TKIP, 4:AES, 5:CKIP64, 6:CKIP128
-	UCHAR   KeyLen;
-#ifdef CONFIG_STA_SUPPORT
-	UCHAR   BssId[6];
-#endif // CONFIG_STA_SUPPORT //
-            // Key length for each key, 0: entry is invalid
-	UCHAR   Type;               // Indicate Pairwise/Group when reporting MIC error
-} CIPHER_KEY, *PCIPHER_KEY;
-
-typedef struct _BBP_TUNING_STRUCT {
-	BOOLEAN     Enable;
-	UCHAR       FalseCcaCountUpperBound;  // 100 per sec
-	UCHAR       FalseCcaCountLowerBound;  // 10 per sec
-	UCHAR       R17LowerBound;            // specified in E2PROM
-	UCHAR       R17UpperBound;            // 0x68 according to David Tung
-	UCHAR       CurrentR17Value;
-} BBP_TUNING, *PBBP_TUNING;
-
-typedef struct _SOFT_RX_ANT_DIVERSITY_STRUCT {
-	UCHAR     EvaluatePeriod;		 // 0:not evalute status, 1: evaluate status, 2: switching status
-	UCHAR     EvaluateStableCnt;
-	UCHAR     Pair1PrimaryRxAnt;     // 0:Ant-E1, 1:Ant-E2
-	UCHAR     Pair1SecondaryRxAnt;   // 0:Ant-E1, 1:Ant-E2
-	UCHAR     Pair2PrimaryRxAnt;     // 0:Ant-E3, 1:Ant-E4
-	UCHAR     Pair2SecondaryRxAnt;   // 0:Ant-E3, 1:Ant-E4
-	SHORT     Pair1AvgRssi[2];       // AvgRssi[0]:E1, AvgRssi[1]:E2
-	SHORT     Pair2AvgRssi[2];       // AvgRssi[0]:E3, AvgRssi[1]:E4
-	SHORT     Pair1LastAvgRssi;      //
-	SHORT     Pair2LastAvgRssi;      //
-	ULONG     RcvPktNumWhenEvaluate;
-	BOOLEAN   FirstPktArrivedWhenEvaluate;
-	RALINK_TIMER_STRUCT    RxAntDiversityTimer;
-} SOFT_RX_ANT_DIVERSITY, *PSOFT_RX_ANT_DIVERSITY;
-
-typedef struct _LEAP_AUTH_INFO {
-	BOOLEAN         Enabled;        //Ture: Enable LEAP Authentication
-	BOOLEAN         CCKM;           //Ture: Use Fast Reauthentication with CCKM
-	UCHAR           Reserve[2];
-	UCHAR           UserName[256];  //LEAP, User name
-	ULONG           UserNameLen;
-	UCHAR           Password[256];  //LEAP, User Password
-	ULONG           PasswordLen;
-} LEAP_AUTH_INFO, *PLEAP_AUTH_INFO;
-
-typedef struct {
-	UCHAR        Addr[MAC_ADDR_LEN];
-	UCHAR        ErrorCode[2];  //00 01-Invalid authentication type
-								//00 02-Authentication timeout
-								//00 03-Challenge from AP failed
-								//00 04-Challenge to AP failed
-	BOOLEAN      Reported;
-} ROGUEAP_ENTRY, *PROGUEAP_ENTRY;
-
-typedef struct {
-	UCHAR               RogueApNr;
-	ROGUEAP_ENTRY       RogueApEntry[MAX_LEN_OF_BSS_TABLE];
-} ROGUEAP_TABLE, *PROGUEAP_TABLE;
-
-typedef struct {
-	BOOLEAN     Enable;
-	UCHAR       Delta;
-	BOOLEAN     PlusSign;
-} CCK_TX_POWER_CALIBRATE, *PCCK_TX_POWER_CALIBRATE;
-
-//
-// Receive Tuple Cache Format
-//
-typedef struct  _TUPLE_CACHE    {
-	BOOLEAN         Valid;
-	UCHAR           MacAddress[MAC_ADDR_LEN];
-	USHORT          Sequence;
-	USHORT          Frag;
-} TUPLE_CACHE, *PTUPLE_CACHE;
-
-//
-// Fragment Frame structure
-//
-typedef struct  _FRAGMENT_FRAME {
-	PNDIS_PACKET    pFragPacket;
-	ULONG       RxSize;
-	USHORT      Sequence;
-	USHORT      LastFrag;
-	ULONG       Flags;          // Some extra frame information. bit 0: LLC presented
-} FRAGMENT_FRAME, *PFRAGMENT_FRAME;
-
-
-//
-// Packet information for NdisQueryPacket
-//
-typedef struct  _PACKET_INFO    {
-	UINT            PhysicalBufferCount;    // Physical breaks of buffer descripor chained
-	UINT            BufferCount ;           // Number of Buffer descriptor chained
-	UINT            TotalPacketLength ;     // Self explained
-	PNDIS_BUFFER    pFirstBuffer;           // Pointer to first buffer descriptor
-} PACKET_INFO, *PPACKET_INFO;
-
-//
-// Tkip Key structure which RC4 key & MIC calculation
-//
-typedef struct  _TKIP_KEY_INFO  {
-	UINT        nBytesInM;  // # bytes in M for MICKEY
-	ULONG       IV16;
-	ULONG       IV32;
-	ULONG       K0;         // for MICKEY Low
-	ULONG       K1;         // for MICKEY Hig
-	ULONG       L;          // Current state for MICKEY
-	ULONG       R;          // Current state for MICKEY
-	ULONG       M;          // Message accumulator for MICKEY
-	UCHAR       RC4KEY[16];
-	UCHAR       MIC[8];
-} TKIP_KEY_INFO, *PTKIP_KEY_INFO;
-
-//
-// Private / Misc data, counters for driver internal use
-//
-typedef struct  __PRIVATE_STRUC {
-	UINT       SystemResetCnt;         // System reset counter
-	UINT       TxRingFullCnt;          // Tx ring full occurrance number
-	UINT       PhyRxErrCnt;            // PHY Rx error count, for debug purpose, might move to global counter
-	// Variables for WEP encryption / decryption in rtmp_wep.c
-	UINT       FCSCRC32;
-	ARCFOURCONTEXT  WEPCONTEXT;
-	// Tkip stuff
-	TKIP_KEY_INFO   Tx;
-	TKIP_KEY_INFO   Rx;
-} PRIVATE_STRUC, *PPRIVATE_STRUC;
-
-// structure to tune BBP R66 (BBP TUNING)
-typedef struct _BBP_R66_TUNING {
-	BOOLEAN     bEnable;
-	USHORT      FalseCcaLowerThreshold;  // default 100
-	USHORT      FalseCcaUpperThreshold;  // default 512
-	UCHAR       R66Delta;
-	UCHAR       R66CurrentValue;
-	BOOLEAN		R66LowerUpperSelect; //Before LinkUp, Used LowerBound or UpperBound as R66 value.
-} BBP_R66_TUNING, *PBBP_R66_TUNING;
-
-// structure to store channel TX power
-typedef struct _CHANNEL_TX_POWER {
-	USHORT     RemainingTimeForUse;		//unit: sec
-	UCHAR      Channel;
-#ifdef DOT11N_DRAFT3
-	BOOLEAN       bEffectedChannel;	// For BW 40 operating in 2.4GHz , the "effected channel" is the channel that is covered in 40Mhz.
-#endif // DOT11N_DRAFT3 //
-	CHAR       Power;
-	CHAR       Power2;
-	UCHAR      MaxTxPwr;
-	UCHAR      DfsReq;
-} CHANNEL_TX_POWER, *PCHANNEL_TX_POWER;
-
-// structure to store 802.11j channel TX power
-typedef struct _CHANNEL_11J_TX_POWER {
-	UCHAR      Channel;
-	UCHAR      BW;	// BW_10 or BW_20
-	CHAR       Power;
-	CHAR       Power2;
-	USHORT     RemainingTimeForUse;		//unit: sec
-} CHANNEL_11J_TX_POWER, *PCHANNEL_11J_TX_POWER;
-
-typedef enum _ABGBAND_STATE_ {
-	UNKNOWN_BAND,
-	BG_BAND,
-	A_BAND,
-} ABGBAND_STATE;
-
-typedef struct _MLME_STRUCT {
-#ifdef CONFIG_STA_SUPPORT
-	// STA state machines
-	STATE_MACHINE           CntlMachine;
-	STATE_MACHINE           AssocMachine;
-	STATE_MACHINE           AuthMachine;
-	STATE_MACHINE           AuthRspMachine;
-	STATE_MACHINE           SyncMachine;
-	STATE_MACHINE           WpaPskMachine;
-	STATE_MACHINE           LeapMachine;
-	STATE_MACHINE           AironetMachine;
-	STATE_MACHINE_FUNC      AssocFunc[ASSOC_FUNC_SIZE];
-	STATE_MACHINE_FUNC      AuthFunc[AUTH_FUNC_SIZE];
-	STATE_MACHINE_FUNC      AuthRspFunc[AUTH_RSP_FUNC_SIZE];
-	STATE_MACHINE_FUNC      SyncFunc[SYNC_FUNC_SIZE];
-	STATE_MACHINE_FUNC      WpaPskFunc[WPA_PSK_FUNC_SIZE];
-	STATE_MACHINE_FUNC      AironetFunc[AIRONET_FUNC_SIZE];
-#endif // CONFIG_STA_SUPPORT //
-	STATE_MACHINE_FUNC      ActFunc[ACT_FUNC_SIZE];
-	// Action
-	STATE_MACHINE           ActMachine;
-
-
-#ifdef QOS_DLS_SUPPORT
-	STATE_MACHINE			DlsMachine;
-	STATE_MACHINE_FUNC      DlsFunc[DLS_FUNC_SIZE];
-#endif // QOS_DLS_SUPPORT //
-
-
-
-
-	ULONG                   ChannelQuality;  // 0..100, Channel Quality Indication for Roaming
-	ULONG                   Now32;           // latch the value of NdisGetSystemUpTime()
-	ULONG                   LastSendNULLpsmTime;
-
-	BOOLEAN                 bRunning;
-	NDIS_SPIN_LOCK          TaskLock;
-	MLME_QUEUE              Queue;
-
-	UINT                    ShiftReg;
-
-	RALINK_TIMER_STRUCT     PeriodicTimer;
-	RALINK_TIMER_STRUCT     APSDPeriodicTimer;
-	RALINK_TIMER_STRUCT     LinkDownTimer;
-	RALINK_TIMER_STRUCT     LinkUpTimer;
-	ULONG                   PeriodicRound;
-	ULONG                   OneSecPeriodicRound;
-
-	UCHAR					RealRxPath;
-	BOOLEAN					bLowThroughput;
-	BOOLEAN					bEnableAutoAntennaCheck;
-	RALINK_TIMER_STRUCT		RxAntEvalTimer;
-
-#ifdef RT30xx
-	UCHAR CaliBW40RfR24;
-	UCHAR CaliBW20RfR24;
-#endif // RT30xx //
-
-} MLME_STRUCT, *PMLME_STRUCT;
-
-// structure for radar detection and channel switch
-typedef struct _RADAR_DETECT_STRUCT {
-    //BOOLEAN		IEEE80211H;			// 0: disable, 1: enable IEEE802.11h
-	UCHAR		CSCount;			//Channel switch counter
-	UCHAR		CSPeriod;			//Channel switch period (beacon count)
-	UCHAR		RDCount;			//Radar detection counter
-	UCHAR		RDMode;				//Radar Detection mode
-	UCHAR		RDDurRegion;		//Radar detection duration region
-	UCHAR		BBPR16;
-	UCHAR		BBPR17;
-	UCHAR		BBPR18;
-	UCHAR		BBPR21;
-	UCHAR		BBPR22;
-	UCHAR		BBPR64;
-	ULONG		InServiceMonitorCount; // unit: sec
-	UINT8		DfsSessionTime;
-	BOOLEAN		bFastDfs;
-	UINT8		ChMovingTime;
-	UINT8		LongPulseRadarTh;
-} RADAR_DETECT_STRUCT, *PRADAR_DETECT_STRUCT;
-
-#ifdef CARRIER_DETECTION_SUPPORT
-typedef enum CD_STATE_n
-{
-	CD_NORMAL,
-	CD_SILENCE,
-	CD_MAX_STATE
-} CD_STATE;
-
-typedef struct CARRIER_DETECTION_s
-{
-	BOOLEAN					Enable;
-	UINT8					CDSessionTime;
-	UINT8					CDPeriod;
-	CD_STATE				CD_State;
-} CARRIER_DETECTION, *PCARRIER_DETECTION;
-#endif // CARRIER_DETECTION_SUPPORT //
-
-typedef enum _REC_BLOCKACK_STATUS
-{
-    Recipient_NONE=0,
-	Recipient_USED,
-	Recipient_HandleRes,
-    Recipient_Accept
-} REC_BLOCKACK_STATUS, *PREC_BLOCKACK_STATUS;
-
-typedef enum _ORI_BLOCKACK_STATUS
-{
-    Originator_NONE=0,
-	Originator_USED,
-    Originator_WaitRes,
-    Originator_Done
-} ORI_BLOCKACK_STATUS, *PORI_BLOCKACK_STATUS;
-
-#ifdef DOT11_N_SUPPORT
-typedef struct _BA_ORI_ENTRY{
-	UCHAR   Wcid;
-	UCHAR   TID;
-	UCHAR   BAWinSize;
-	UCHAR   Token;
-// Sequence is to fill every outgoing QoS DATA frame's sequence field in 802.11 header.
-	USHORT	Sequence;
-	USHORT	TimeOutValue;
-	ORI_BLOCKACK_STATUS  ORI_BA_Status;
-	RALINK_TIMER_STRUCT ORIBATimer;
-	PVOID	pAdapter;
-} BA_ORI_ENTRY, *PBA_ORI_ENTRY;
-
-typedef struct _BA_REC_ENTRY {
-	UCHAR   Wcid;
-	UCHAR   TID;
-	UCHAR   BAWinSize;	// 7.3.1.14. each buffer is capable of holding a max AMSDU or MSDU.
-	//UCHAR	NumOfRxPkt;
-	//UCHAR    Curindidx; // the head in the RX reordering buffer
-	USHORT		LastIndSeq;
-//	USHORT		LastIndSeqAtTimer;
-	USHORT		TimeOutValue;
-	RALINK_TIMER_STRUCT RECBATimer;
-	ULONG		LastIndSeqAtTimer;
-	ULONG		nDropPacket;
-	ULONG		rcvSeq;
-	REC_BLOCKACK_STATUS  REC_BA_Status;
-//	UCHAR	RxBufIdxUsed;
-	// corresponding virtual address for RX reordering packet storage.
-	//RTMP_REORDERDMABUF MAP_RXBuf[MAX_RX_REORDERBUF];
-	NDIS_SPIN_LOCK          RxReRingLock;                 // Rx Ring spinlock
-//	struct _BA_REC_ENTRY *pNext;
-	PVOID	pAdapter;
-	struct reordering_list	list;
-} BA_REC_ENTRY, *PBA_REC_ENTRY;
-
-
-typedef struct {
-	ULONG		numAsRecipient;		// I am recipient of numAsRecipient clients. These client are in the BARecEntry[]
-	ULONG		numAsOriginator;	// I am originator of 	numAsOriginator clients. These clients are in the BAOriEntry[]
-	BA_ORI_ENTRY       BAOriEntry[MAX_LEN_OF_BA_ORI_TABLE];
-	BA_REC_ENTRY       BARecEntry[MAX_LEN_OF_BA_REC_TABLE];
-} BA_TABLE, *PBA_TABLE;
-
-//For QureyBATableOID use;
-typedef struct  PACKED _OID_BA_REC_ENTRY{
-	UCHAR   MACAddr[MAC_ADDR_LEN];
-	UCHAR   BaBitmap;   // if (BaBitmap&(1<<TID)), this session with{MACAddr, TID}exists, so read BufSize[TID] for BufferSize
-	UCHAR   rsv;
-	UCHAR   BufSize[8];
-	REC_BLOCKACK_STATUS	REC_BA_Status[8];
-} OID_BA_REC_ENTRY, *POID_BA_REC_ENTRY;
-
-//For QureyBATableOID use;
-typedef struct  PACKED _OID_BA_ORI_ENTRY{
-	UCHAR   MACAddr[MAC_ADDR_LEN];
-	UCHAR   BaBitmap;  // if (BaBitmap&(1<<TID)), this session with{MACAddr, TID}exists, so read BufSize[TID] for BufferSize, read ORI_BA_Status[TID] for status
-	UCHAR   rsv;
-	UCHAR   BufSize[8];
-	ORI_BLOCKACK_STATUS  ORI_BA_Status[8];
-} OID_BA_ORI_ENTRY, *POID_BA_ORI_ENTRY;
-
-typedef struct _QUERYBA_TABLE{
-	OID_BA_ORI_ENTRY       BAOriEntry[32];
-	OID_BA_REC_ENTRY       BARecEntry[32];
-	UCHAR   OriNum;// Number of below BAOriEntry
-	UCHAR   RecNum;// Number of below BARecEntry
-} QUERYBA_TABLE, *PQUERYBA_TABLE;
-
-typedef	union	_BACAP_STRUC	{
-#ifdef RT_BIG_ENDIAN
-	struct	{
-		UINT32     :4;
-		UINT32     b2040CoexistScanSup:1;		//As Sta, support do 2040 coexistence scan for AP. As Ap, support monitor trigger event to check if can use BW 40MHz.
-		UINT32     bHtAdhoc:1;			// adhoc can use ht rate.
-		UINT32     MMPSmode:2;	// MIMO power save more, 0:static, 1:dynamic, 2:rsv, 3:mimo enable
-		UINT32     AmsduSize:1;	// 0:3839, 1:7935 bytes. UINT  MSDUSizeToBytes[]	= { 3839, 7935};
-		UINT32     AmsduEnable:1;	//Enable AMSDU transmisstion
-		UINT32		MpduDensity:3;
-		UINT32		Policy:2;	// 0: DELAY_BA 1:IMMED_BA  (//BA Policy subfiled value in ADDBA frame)   2:BA-not use
-		UINT32		AutoBA:1;	// automatically BA
-		UINT32		TxBAWinLimit:8;
-		UINT32		RxBAWinLimit:8;
-	}	field;
-#else
-	struct	{
-		UINT32		RxBAWinLimit:8;
-		UINT32		TxBAWinLimit:8;
-		UINT32		AutoBA:1;	// automatically BA
-		UINT32		Policy:2;	// 0: DELAY_BA 1:IMMED_BA  (//BA Policy subfiled value in ADDBA frame)   2:BA-not use
-		UINT32		MpduDensity:3;
-		UINT32       	AmsduEnable:1;	//Enable AMSDU transmisstion
-		UINT32       	AmsduSize:1;	// 0:3839, 1:7935 bytes. UINT  MSDUSizeToBytes[]	= { 3839, 7935};
-		UINT32       	MMPSmode:2;	// MIMO power save more, 0:static, 1:dynamic, 2:rsv, 3:mimo enable
-		UINT32       	bHtAdhoc:1;			// adhoc can use ht rate.
-		UINT32       	b2040CoexistScanSup:1;		//As Sta, support do 2040 coexistence scan for AP. As Ap, support monitor trigger event to check if can use BW 40MHz.
-		UINT32       	:4;
-	}	field;
-#endif
-	UINT32			word;
-} BACAP_STRUC, *PBACAP_STRUC;
-#endif // DOT11_N_SUPPORT //
-
-//This structure is for all 802.11n card InterOptibilityTest action. Reset all Num every n second.  (Details see MLMEPeriodic)
-typedef	struct	_IOT_STRUC	{
-	UCHAR			Threshold[2];
-	UCHAR			ReorderTimeOutNum[MAX_LEN_OF_BA_REC_TABLE];	// compare with threshold[0]
-	UCHAR			RefreshNum[MAX_LEN_OF_BA_REC_TABLE];	// compare with threshold[1]
-	ULONG			OneSecInWindowCount;
-	ULONG			OneSecFrameDuplicateCount;
-	ULONG			OneSecOutWindowCount;
-	UCHAR			DelOriAct;
-	UCHAR			DelRecAct;
-	UCHAR			RTSShortProt;
-	UCHAR			RTSLongProt;
-	BOOLEAN			bRTSLongProtOn;
-#ifdef CONFIG_STA_SUPPORT
-	BOOLEAN			bLastAtheros;
-    BOOLEAN			bCurrentAtheros;
-    BOOLEAN         bNowAtherosBurstOn;
-	BOOLEAN			bNextDisableRxBA;
-    BOOLEAN			bToggle;
-#endif // CONFIG_STA_SUPPORT //
-} IOT_STRUC, *PIOT_STRUC;
-
-// This is the registry setting for 802.11n transmit setting.  Used in advanced page.
-typedef union _REG_TRANSMIT_SETTING {
-#ifdef RT_BIG_ENDIAN
- struct {
-         UINT32  rsv:13;
-		 UINT32  EXTCHA:2;
-		 UINT32  HTMODE:1;
-		 UINT32  TRANSNO:2;
-		 UINT32  STBC:1; //SPACE
-		 UINT32  ShortGI:1;
-		 UINT32  BW:1; //channel bandwidth 20MHz or 40 MHz
-		 UINT32  TxBF:1; // 3*3
-		 UINT32  rsv0:10;
-		 //UINT32  MCS:7;                 // MCS
-         //UINT32  PhyMode:4;
-    } field;
-#else
- struct {
-         //UINT32  PhyMode:4;
-         //UINT32  MCS:7;                 // MCS
-		 UINT32  rsv0:10;
-		 UINT32  TxBF:1;
-         UINT32  BW:1; //channel bandwidth 20MHz or 40 MHz
-         UINT32  ShortGI:1;
-         UINT32  STBC:1; //SPACE
-         UINT32  TRANSNO:2;
-         UINT32  HTMODE:1;
-         UINT32  EXTCHA:2;
-         UINT32  rsv:13;
-    } field;
-#endif
- UINT32   word;
-} REG_TRANSMIT_SETTING, *PREG_TRANSMIT_SETTING;
-
-typedef union  _DESIRED_TRANSMIT_SETTING {
-#ifdef RT_BIG_ENDIAN
-	struct	{
-			USHORT		rsv:3;
-			USHORT		FixedTxMode:2;			// If MCS isn't AUTO, fix rate in CCK, OFDM or HT mode.
-			USHORT		PhyMode:4;
-			USHORT   	MCS:7;                 // MCS
-	}	field;
-#else
-	struct	{
-			USHORT   	MCS:7;                 	// MCS
-			USHORT		PhyMode:4;
-			USHORT	 	FixedTxMode:2;			// If MCS isn't AUTO, fix rate in CCK, OFDM or HT mode.
-			USHORT		rsv:3;
-	}	field;
-#endif
-	USHORT		word;
- } DESIRED_TRANSMIT_SETTING, *PDESIRED_TRANSMIT_SETTING;
-
-typedef struct {
-	BOOLEAN		IsRecipient;
-	UCHAR   MACAddr[MAC_ADDR_LEN];
-	UCHAR   TID;
-	UCHAR   nMSDU;
-	USHORT   TimeOut;
-	BOOLEAN bAllTid;  // If True, delete all TID for BA sessions with this MACaddr.
-} OID_ADD_BA_ENTRY, *POID_ADD_BA_ENTRY;
-
-//
-// Multiple SSID structure
-//
-#define WLAN_MAX_NUM_OF_TIM			((MAX_LEN_OF_MAC_TABLE >> 3) + 1) /* /8 + 1 */
-#define WLAN_CT_TIM_BCMC_OFFSET		0 /* unit: 32B */
-
-/* clear bcmc TIM bit */
-#define WLAN_MR_TIM_BCMC_CLEAR(apidx) \
-	pAd->ApCfg.MBSSID[apidx].TimBitmaps[WLAN_CT_TIM_BCMC_OFFSET] &= ~BIT8[0];
-
-/* set bcmc TIM bit */
-#define WLAN_MR_TIM_BCMC_SET(apidx) \
-	pAd->ApCfg.MBSSID[apidx].TimBitmaps[WLAN_CT_TIM_BCMC_OFFSET] |= BIT8[0];
-
-/* clear a station PS TIM bit */
-#define WLAN_MR_TIM_BIT_CLEAR(ad_p, apidx, wcid) \
-	{	UCHAR tim_offset = wcid >> 3; \
-		UCHAR bit_offset = wcid & 0x7; \
-		ad_p->ApCfg.MBSSID[apidx].TimBitmaps[tim_offset] &= (~BIT8[bit_offset]); }
-
-/* set a station PS TIM bit */
-#define WLAN_MR_TIM_BIT_SET(ad_p, apidx, wcid) \
-	{	UCHAR tim_offset = wcid >> 3; \
-		UCHAR bit_offset = wcid & 0x7; \
-		ad_p->ApCfg.MBSSID[apidx].TimBitmaps[tim_offset] |= BIT8[bit_offset]; }
-
-#ifdef RT2870
-#define BEACON_BITMAP_MASK		0xff
-typedef struct _BEACON_SYNC_STRUCT_
-{
-	UCHAR        			BeaconBuf[HW_BEACON_MAX_COUNT][HW_BEACON_OFFSET];
-	UCHAR					BeaconTxWI[HW_BEACON_MAX_COUNT][TXWI_SIZE];
-	ULONG 					TimIELocationInBeacon[HW_BEACON_MAX_COUNT];
-	ULONG					CapabilityInfoLocationInBeacon[HW_BEACON_MAX_COUNT];
-	BOOLEAN					EnableBeacon;		// trigger to enable beacon transmission.
-	UCHAR					BeaconBitMap;		// NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change.
-	UCHAR					DtimBitOn;			// NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change.
-}BEACON_SYNC_STRUCT;
-#endif // RT2870 //
-
-typedef struct _MULTISSID_STRUCT {
-	UCHAR								Bssid[MAC_ADDR_LEN];
-    UCHAR                               SsidLen;
-    CHAR                                Ssid[MAX_LEN_OF_SSID];
-    USHORT                              CapabilityInfo;
-
-    PNET_DEV                   			MSSIDDev;
-
-	NDIS_802_11_AUTHENTICATION_MODE     AuthMode;
-	NDIS_802_11_WEP_STATUS              WepStatus;
-	NDIS_802_11_WEP_STATUS				GroupKeyWepStatus;
-	WPA_MIX_PAIR_CIPHER					WpaMixPairCipher;
-
-	ULONG								TxCount;
-	ULONG								RxCount;
-	ULONG								ReceivedByteCount;
-	ULONG								TransmittedByteCount;
-	ULONG								RxErrorCount;
-	ULONG								RxDropCount;
-
-	HTTRANSMIT_SETTING					HTPhyMode, MaxHTPhyMode, MinHTPhyMode;// For transmit phy setting in TXWI.
-	RT_HT_PHY_INFO						DesiredHtPhyInfo;
-	DESIRED_TRANSMIT_SETTING        	DesiredTransmitSetting; // Desired transmit setting. this is for reading registry setting only. not useful.
-	BOOLEAN								bAutoTxRateSwitch;
-
-	//CIPHER_KEY                          SharedKey[SHARE_KEY_NUM]; // ref pAd->SharedKey[BSS][4]
-	UCHAR                               DefaultKeyId;
-
-	UCHAR								TxRate;       // RATE_1, RATE_2, RATE_5_5, RATE_11, ...
-	UCHAR     							DesiredRates[MAX_LEN_OF_SUPPORTED_RATES];// OID_802_11_DESIRED_RATES
-	UCHAR								DesiredRatesIndex;
-	UCHAR     							MaxTxRate;            // RATE_1, RATE_2, RATE_5_5, RATE_11
-
-//	ULONG           					TimBitmap;      // bit0 for broadcast, 1 for AID1, 2 for AID2, ...so on
-//    ULONG           					TimBitmap2;     // b0 for AID32, b1 for AID33, ... and so on
-	UCHAR								TimBitmaps[WLAN_MAX_NUM_OF_TIM];
-
-    // WPA
-    UCHAR                               GMK[32];
-    UCHAR                               PMK[32];
-	UCHAR								GTK[32];
-    BOOLEAN                             IEEE8021X;
-    BOOLEAN                             PreAuth;
-    UCHAR                               GNonce[32];
-    UCHAR                               PortSecured;
-    NDIS_802_11_PRIVACY_FILTER          PrivacyFilter;
-    UCHAR                               BANClass3Data;
-    ULONG                               IsolateInterStaTraffic;
-
-    UCHAR                               RSNIE_Len[2];
-    UCHAR                               RSN_IE[2][MAX_LEN_OF_RSNIE];
-
-
-    UCHAR                   			TimIELocationInBeacon;
-    UCHAR                   			CapabilityInfoLocationInBeacon;
-    // outgoing BEACON frame buffer and corresponding TXWI
-	// PTXWI_STRUC                           BeaconTxWI; //
-    CHAR                                BeaconBuf[MAX_BEACON_SIZE]; // NOTE: BeaconBuf should be 4-byte aligned
-
-    BOOLEAN                             bHideSsid;
-	UINT16								StationKeepAliveTime; // unit: second
-
-    USHORT                              VLAN_VID;
-    USHORT                              VLAN_Priority;
-
-    RT_802_11_ACL						AccessControlList;
-
-	// EDCA Qos
-    BOOLEAN								bWmmCapable;	// 0:disable WMM, 1:enable WMM
-    BOOLEAN								bDLSCapable;	// 0:disable DLS, 1:enable DLS
-
-	UCHAR           					DlsPTK[64];		// Due to windows dirver count on meetinghouse to handle 4-way shake
-
-	// For 802.1x daemon setting per BSS
-	UCHAR								radius_srv_num;
-	RADIUS_SRV_INFO						radius_srv_info[MAX_RADIUS_SRV_NUM];
-
-#ifdef RTL865X_SOC
-	unsigned int						mylinkid;
-#endif
-
-
-	UINT32					RcvdConflictSsidCount;
-	UINT32					RcvdSpoofedAssocRespCount;
-	UINT32					RcvdSpoofedReassocRespCount;
-	UINT32					RcvdSpoofedProbeRespCount;
-	UINT32					RcvdSpoofedBeaconCount;
-	UINT32					RcvdSpoofedDisassocCount;
-	UINT32					RcvdSpoofedAuthCount;
-	UINT32					RcvdSpoofedDeauthCount;
-	UINT32					RcvdSpoofedUnknownMgmtCount;
-	UINT32					RcvdReplayAttackCount;
-
-	CHAR					RssiOfRcvdConflictSsid;
-	CHAR					RssiOfRcvdSpoofedAssocResp;
-	CHAR					RssiOfRcvdSpoofedReassocResp;
-	CHAR					RssiOfRcvdSpoofedProbeResp;
-	CHAR					RssiOfRcvdSpoofedBeacon;
-	CHAR					RssiOfRcvdSpoofedDisassoc;
-	CHAR					RssiOfRcvdSpoofedAuth;
-	CHAR					RssiOfRcvdSpoofedDeauth;
-	CHAR					RssiOfRcvdSpoofedUnknownMgmt;
-	CHAR					RssiOfRcvdReplayAttack;
-
-	BOOLEAN					bBcnSntReq;
-	UCHAR					BcnBufIdx;
-} MULTISSID_STRUCT, *PMULTISSID_STRUCT;
-
-
-
-#ifdef DOT11N_DRAFT3
-typedef enum _BSS2040COEXIST_FLAG{
-	BSS_2040_COEXIST_DISABLE = 0,
-	BSS_2040_COEXIST_TIMER_FIRED  = 1,
-	BSS_2040_COEXIST_INFO_SYNC = 2,
-	BSS_2040_COEXIST_INFO_NOTIFY = 4,
-}BSS2040COEXIST_FLAG;
-#endif // DOT11N_DRAFT3 //
-
-// configuration common to OPMODE_AP as well as OPMODE_STA
-typedef struct _COMMON_CONFIG {
-
-	BOOLEAN		bCountryFlag;
-	UCHAR		CountryCode[3];
-	UCHAR		Geography;
-	UCHAR       CountryRegion;      // Enum of country region, 0:FCC, 1:IC, 2:ETSI, 3:SPAIN, 4:France, 5:MKK, 6:MKK1, 7:Israel
-	UCHAR       CountryRegionForABand;	// Enum of country region for A band
-	UCHAR       PhyMode;            // PHY_11A, PHY_11B, PHY_11BG_MIXED, PHY_ABG_MIXED
-	USHORT      Dsifs;              // in units of usec
-	ULONG       PacketFilter;       // Packet filter for receiving
-
-	CHAR        Ssid[MAX_LEN_OF_SSID]; // NOT NULL-terminated
-	UCHAR       SsidLen;               // the actual ssid length in used
-	UCHAR       LastSsidLen;               // the actual ssid length in used
-	CHAR        LastSsid[MAX_LEN_OF_SSID]; // NOT NULL-terminated
-	UCHAR		LastBssid[MAC_ADDR_LEN];
-
-	UCHAR       Bssid[MAC_ADDR_LEN];
-	USHORT      BeaconPeriod;
-	UCHAR       Channel;
-	UCHAR       CentralChannel;    	// Central Channel when using 40MHz is indicating. not real channel.
-
-	UCHAR       SupRate[MAX_LEN_OF_SUPPORTED_RATES];
-	UCHAR       SupRateLen;
-	UCHAR       ExtRate[MAX_LEN_OF_SUPPORTED_RATES];
-	UCHAR       ExtRateLen;
-	UCHAR       DesireRate[MAX_LEN_OF_SUPPORTED_RATES];      // OID_802_11_DESIRED_RATES
-	UCHAR       MaxDesiredRate;
-	UCHAR       ExpectedACKRate[MAX_LEN_OF_SUPPORTED_RATES];
-
-	ULONG       BasicRateBitmap;        // backup basic ratebitmap
-
-	BOOLEAN		bAPSDCapable;
-	BOOLEAN		bInServicePeriod;
-	BOOLEAN		bAPSDAC_BE;
-	BOOLEAN		bAPSDAC_BK;
-	BOOLEAN		bAPSDAC_VI;
-	BOOLEAN		bAPSDAC_VO;
-	BOOLEAN		bNeedSendTriggerFrame;
-	BOOLEAN		bAPSDForcePowerSave;	// Force power save mode, should only use in APSD-STAUT
-	ULONG		TriggerTimerCount;
-	UCHAR		MaxSPLength;
-	UCHAR		BBPCurrentBW;	// BW_10, 	BW_20, BW_40
-	// move to MULTISSID_STRUCT for MBSS
-	//HTTRANSMIT_SETTING	HTPhyMode, MaxHTPhyMode, MinHTPhyMode;// For transmit phy setting in TXWI.
-	REG_TRANSMIT_SETTING        RegTransmitSetting; //registry transmit setting. this is for reading registry setting only. not useful.
-	//UCHAR       FixedTxMode;              // Fixed Tx Mode (CCK, OFDM), for HT fixed tx mode (GF, MIX) , refer to RegTransmitSetting.field.HTMode
-	UCHAR       TxRate;                 // Same value to fill in TXD. TxRate is 6-bit
-	UCHAR       MaxTxRate;              // RATE_1, RATE_2, RATE_5_5, RATE_11
-	UCHAR       TxRateIndex;            // Tx rate index in RateSwitchTable
-	UCHAR       TxRateTableSize;        // Valid Tx rate table size in RateSwitchTable
-	//BOOLEAN		bAutoTxRateSwitch;
-	UCHAR       MinTxRate;              // RATE_1, RATE_2, RATE_5_5, RATE_11
-	UCHAR       RtsRate;                // RATE_xxx
-	HTTRANSMIT_SETTING	MlmeTransmit;   // MGMT frame PHY rate setting when operatin at Ht rate.
-	UCHAR       MlmeRate;               // RATE_xxx, used to send MLME frames
-	UCHAR       BasicMlmeRate;          // Default Rate for sending MLME frames
-
-	USHORT      RtsThreshold;           // in unit of BYTE
-	USHORT      FragmentThreshold;      // in unit of BYTE
-
-	UCHAR       TxPower;                // in unit of mW
-	ULONG       TxPowerPercentage;      // 0~100 %
-	ULONG       TxPowerDefault;         // keep for TxPowerPercentage
-
-#ifdef DOT11_N_SUPPORT
-	BACAP_STRUC        BACapability; //   NO USE = 0XFF  ;  IMMED_BA =1  ;  DELAY_BA=0
-	BACAP_STRUC        REGBACapability; //   NO USE = 0XFF  ;  IMMED_BA =1  ;  DELAY_BA=0
-#endif // DOT11_N_SUPPORT //
-	IOT_STRUC		IOTestParm;	// 802.11n InterOpbility Test Parameter;
-	ULONG       TxPreamble;             // Rt802_11PreambleLong, Rt802_11PreambleShort, Rt802_11PreambleAuto
-	BOOLEAN     bUseZeroToDisableFragment;     // Microsoft use 0 as disable
-	ULONG       UseBGProtection;        // 0: auto, 1: always use, 2: always not use
-	BOOLEAN     bUseShortSlotTime;      // 0: disable, 1 - use short slot (9us)
-	BOOLEAN     bEnableTxBurst;         // 1: enble TX PACKET BURST, 0: disable TX PACKET BURST
-	BOOLEAN     bAggregationCapable;      // 1: enable TX aggregation when the peer supports it
-	BOOLEAN     bPiggyBackCapable;		// 1: enable TX piggy-back according MAC's version
-	BOOLEAN     bIEEE80211H;			// 1: enable IEEE802.11h spec.
-	ULONG		DisableOLBCDetect;		// 0: enable OLBC detect; 1 disable OLBC detect
-
-#ifdef DOT11_N_SUPPORT
-	BOOLEAN				bRdg;
-#endif // DOT11_N_SUPPORT //
-	BOOLEAN             bWmmCapable;        // 0:disable WMM, 1:enable WMM
-	QOS_CAPABILITY_PARM APQosCapability;    // QOS capability of the current associated AP
-	EDCA_PARM           APEdcaParm;         // EDCA parameters of the current associated AP
-	QBSS_LOAD_PARM      APQbssLoad;         // QBSS load of the current associated AP
-	UCHAR               AckPolicy[4];       // ACK policy of the specified AC. see ACK_xxx
-#ifdef CONFIG_STA_SUPPORT
-	BOOLEAN				bDLSCapable;		// 0:disable DLS, 1:enable DLS
-#endif // CONFIG_STA_SUPPORT //
-	// a bitmap of BOOLEAN flags. each bit represent an operation status of a particular
-	// BOOLEAN control, either ON or OFF. These flags should always be accessed via
-	// OPSTATUS_TEST_FLAG(), OPSTATUS_SET_FLAG(), OP_STATUS_CLEAR_FLAG() macros.
-	// see fOP_STATUS_xxx in RTMP_DEF.C for detail bit definition
-	ULONG               OpStatusFlags;
-
-	BOOLEAN				NdisRadioStateOff; //For HCT 12.0, set this flag to TRUE instead of called MlmeRadioOff.
-	ABGBAND_STATE		BandState;		// For setting BBP used on B/G or A mode.
-	BOOLEAN				bRxAntDiversity; // 0:disable, 1:enable Software Rx Antenna Diversity.
-
-	// IEEE802.11H--DFS.
-	RADAR_DETECT_STRUCT	RadarDetect;
-
-#ifdef CARRIER_DETECTION_SUPPORT
-	CARRIER_DETECTION		CarrierDetect;
-#endif // CARRIER_DETECTION_SUPPORT //
-
-#ifdef DOT11_N_SUPPORT
-	// HT
-	UCHAR			BASize;		// USer desired BAWindowSize. Should not exceed our max capability
-	//RT_HT_CAPABILITY	SupportedHtPhy;
-	RT_HT_CAPABILITY	DesiredHtPhy;
-	HT_CAPABILITY_IE		HtCapability;
-	ADD_HT_INFO_IE		AddHTInfo;	// Useful as AP.
-	//This IE is used with channel switch announcement element when changing to a new 40MHz.
-	//This IE is included in channel switch ammouncement frames 7.4.1.5, beacons, probe Rsp.
-	NEW_EXT_CHAN_IE	NewExtChanOffset;	//7.3.2.20A, 1 if extension channel is above the control channel, 3 if below, 0 if not present
-
-#ifdef DOT11N_DRAFT3
-	UCHAR					Bss2040CoexistFlag;		// bit 0: bBssCoexistTimerRunning, bit 1: NeedSyncAddHtInfo.
-	RALINK_TIMER_STRUCT	Bss2040CoexistTimer;
-
-	//This IE is used for 20/40 BSS Coexistence.
-	BSS_2040_COEXIST_IE		BSS2040CoexistInfo;
-	// ====== 11n D3.0 =======================>
-	USHORT					Dot11OBssScanPassiveDwell;				// Unit : TU. 5~1000
-	USHORT					Dot11OBssScanActiveDwell;				// Unit : TU. 10~1000
-	USHORT					Dot11BssWidthTriggerScanInt;			// Unit : Second
-	USHORT					Dot11OBssScanPassiveTotalPerChannel;	// Unit : TU. 200~10000
-	USHORT					Dot11OBssScanActiveTotalPerChannel;	// Unit : TU. 20~10000
-	USHORT					Dot11BssWidthChanTranDelayFactor;
-	USHORT					Dot11OBssScanActivityThre;				// Unit : percentage
-
-	ULONG					Dot11BssWidthChanTranDelay;			// multiple of (Dot11BssWidthTriggerScanInt * Dot11BssWidthChanTranDelayFactor)
-	ULONG					CountDownCtr;	// CountDown Counter from (Dot11BssWidthTriggerScanInt * Dot11BssWidthChanTranDelayFactor)
-
-	NDIS_SPIN_LOCK          TriggerEventTabLock;
-	BSS_2040_COEXIST_IE		LastBSSCoexist2040;
-	BSS_2040_COEXIST_IE		BSSCoexist2040;
-	TRIGGER_EVENT_TAB		TriggerEventTab;
-	UCHAR					ChannelListIdx;
-	// <====== 11n D3.0 =======================
-	BOOLEAN					bOverlapScanning;
-#endif // DOT11N_DRAFT3 //
-
-    BOOLEAN                 bHTProtect;
-    BOOLEAN                 bMIMOPSEnable;
-    BOOLEAN					bBADecline;
-	BOOLEAN					bDisableReordering;
-	BOOLEAN					bForty_Mhz_Intolerant;
-	BOOLEAN					bExtChannelSwitchAnnouncement;
-	BOOLEAN					bRcvBSSWidthTriggerEvents;
-	ULONG					LastRcvBSSWidthTriggerEventsTime;
-
-	UCHAR					TxBASize;
-#endif // DOT11_N_SUPPORT //
-
-	// Enable wireless event
-	BOOLEAN				bWirelessEvent;
-	BOOLEAN				bWiFiTest;				// Enable this parameter for WiFi test
-
-	// Tx & Rx Stream number selection
-	UCHAR				TxStream;
-	UCHAR				RxStream;
-
-	// transmit phy mode, trasmit rate for Multicast.
-#ifdef MCAST_RATE_SPECIFIC
-	UCHAR				McastTransmitMcs;
-	UCHAR				McastTransmitPhyMode;
-#endif // MCAST_RATE_SPECIFIC //
-
-	BOOLEAN     		bHardwareRadio;     // Hardware controlled Radio enabled
-
-#ifdef RT2870
-	BOOLEAN     		bMultipleIRP;       // Multiple Bulk IN flag
-	UCHAR       		NumOfBulkInIRP;     // if bMultipleIRP == TRUE, NumOfBulkInIRP will be 4 otherwise be 1
- 	RT_HT_CAPABILITY	SupportedHtPhy;
-	ULONG				MaxPktOneTxBulk;
-	UCHAR				TxBulkFactor;
-	UCHAR				RxBulkFactor;
-
-	BEACON_SYNC_STRUCT	*pBeaconSync;
-	RALINK_TIMER_STRUCT	BeaconUpdateTimer;
-	UINT32				BeaconAdjust;
-	UINT32				BeaconFactor;
-	UINT32				BeaconRemain;
-#endif // RT2870 //
-
-
- 	NDIS_SPIN_LOCK			MeasureReqTabLock;
-	PMEASURE_REQ_TAB		pMeasureReqTab;
-
-	NDIS_SPIN_LOCK			TpcReqTabLock;
-	PTPC_REQ_TAB			pTpcReqTab;
-
-	// transmit phy mode, trasmit rate for Multicast.
-#ifdef MCAST_RATE_SPECIFIC
-	HTTRANSMIT_SETTING		MCastPhyMode;
-#endif // MCAST_RATE_SPECIFIC //
-
-#ifdef SINGLE_SKU
-	UINT16					DefineMaxTxPwr;
-#endif // SINGLE_SKU //
-
-
-} COMMON_CONFIG, *PCOMMON_CONFIG;
-
-
-#ifdef CONFIG_STA_SUPPORT
-/* Modified by Wu Xi-Kun 4/21/2006 */
-// STA configuration and status
-typedef struct _STA_ADMIN_CONFIG {
-	// GROUP 1 -
-	//   User configuration loaded from Registry, E2PROM or OID_xxx. These settings describe
-	//   the user intended configuration, but not necessary fully equal to the final
-	//   settings in ACTIVE BSS after negotiation/compromize with the BSS holder (either
-	//   AP or IBSS holder).
-	//   Once initialized, user configuration can only be changed via OID_xxx
-	UCHAR       BssType;              // BSS_INFRA or BSS_ADHOC
-	USHORT      AtimWin;          // used when starting a new IBSS
-
-	// GROUP 2 -
-	//   User configuration loaded from Registry, E2PROM or OID_xxx. These settings describe
-	//   the user intended configuration, and should be always applied to the final
-	//   settings in ACTIVE BSS without compromising with the BSS holder.
-	//   Once initialized, user configuration can only be changed via OID_xxx
-	UCHAR       RssiTrigger;
-	UCHAR       RssiTriggerMode;      // RSSI_TRIGGERED_UPON_BELOW_THRESHOLD or RSSI_TRIGGERED_UPON_EXCCEED_THRESHOLD
-	USHORT      DefaultListenCount;   // default listen count;
-	ULONG       WindowsPowerMode;           // Power mode for AC power
-	ULONG       WindowsBatteryPowerMode;    // Power mode for battery if exists
-	BOOLEAN     bWindowsACCAMEnable;        // Enable CAM power mode when AC on
-	BOOLEAN     bAutoReconnect;         // Set to TRUE when setting OID_802_11_SSID with no matching BSSID
-	ULONG       WindowsPowerProfile;    // Windows power profile, for NDIS5.1 PnP
-
-	// MIB:ieee802dot11.dot11smt(1).dot11StationConfigTable(1)
-	USHORT      Psm;                  // power management mode   (PWR_ACTIVE|PWR_SAVE)
-	USHORT      DisassocReason;
-	UCHAR       DisassocSta[MAC_ADDR_LEN];
-	USHORT      DeauthReason;
-	UCHAR       DeauthSta[MAC_ADDR_LEN];
-	USHORT      AuthFailReason;
-	UCHAR       AuthFailSta[MAC_ADDR_LEN];
-
-	NDIS_802_11_PRIVACY_FILTER          PrivacyFilter;  // PrivacyFilter enum for 802.1X
-	NDIS_802_11_AUTHENTICATION_MODE     AuthMode;       // This should match to whatever microsoft defined
-	NDIS_802_11_WEP_STATUS              WepStatus;
-	NDIS_802_11_WEP_STATUS				OrigWepStatus;	// Original wep status set from OID
-
-	// Add to support different cipher suite for WPA2/WPA mode
-	NDIS_802_11_ENCRYPTION_STATUS		GroupCipher;		// Multicast cipher suite
-	NDIS_802_11_ENCRYPTION_STATUS		PairCipher;			// Unicast cipher suite
-	BOOLEAN								bMixCipher;			// Indicate current Pair & Group use different cipher suites
-	USHORT								RsnCapability;
-
-	NDIS_802_11_WEP_STATUS              GroupKeyWepStatus;
-
-	UCHAR		PMK[32];                // WPA PSK mode PMK
-	UCHAR       PTK[64];                // WPA PSK mode PTK
-	UCHAR		GTK[32];				// GTK from authenticator
-	BSSID_INFO	SavedPMK[PMKID_NO];
-	UINT		SavedPMKNum;			// Saved PMKID number
-
-	UCHAR		DefaultKeyId;
-
-
-	// WPA 802.1x port control, WPA_802_1X_PORT_SECURED, WPA_802_1X_PORT_NOT_SECURED
-	UCHAR       PortSecured;
-
-	// For WPA countermeasures
-	ULONG       LastMicErrorTime;   // record last MIC error time
-	ULONG       MicErrCnt;          // Should be 0, 1, 2, then reset to zero (after disassoiciation).
-	BOOLEAN     bBlockAssoc;        // Block associate attempt for 60 seconds after counter measure occurred.
-	// For WPA-PSK supplicant state
-	WPA_STATE   WpaState;           // Default is SS_NOTUSE and handled by microsoft 802.1x
-	UCHAR       ReplayCounter[8];
-	UCHAR       ANonce[32];         // ANonce for WPA-PSK from aurhenticator
-	UCHAR       SNonce[32];         // SNonce for WPA-PSK
-
-	UCHAR       LastSNR0;             // last received BEACON's SNR
-	UCHAR       LastSNR1;            // last received BEACON's SNR for 2nd  antenna
-	RSSI_SAMPLE RssiSample;
-	ULONG       NumOfAvgRssiSample;
-
-	ULONG       LastBeaconRxTime;     // OS's timestamp of the last BEACON RX time
-	ULONG       Last11bBeaconRxTime;  // OS's timestamp of the last 11B BEACON RX time
-	ULONG		Last11gBeaconRxTime;	// OS's timestamp of the last 11G BEACON RX time
-	ULONG		Last20NBeaconRxTime;	// OS's timestamp of the last 20MHz N BEACON RX time
-
-	ULONG       LastScanTime;       // Record last scan time for issue BSSID_SCAN_LIST
-	ULONG       ScanCnt;            // Scan counts since most recent SSID, BSSID, SCAN OID request
-	BOOLEAN     bSwRadio;           // Software controlled Radio On/Off, TRUE: On
-	BOOLEAN     bHwRadio;           // Hardware controlled Radio On/Off, TRUE: On
-	BOOLEAN     bRadio;             // Radio state, And of Sw & Hw radio state
-	BOOLEAN     bHardwareRadio;     // Hardware controlled Radio enabled
-	BOOLEAN     bShowHiddenSSID;    // Show all known SSID in SSID list get operation
-
-    //BOOLEAN		AdhocBOnlyJoined;	// Indicate Adhoc B Join.
-    //BOOLEAN		AdhocBGJoined;		// Indicate Adhoc B/G Join.
-    //BOOLEAN		Adhoc20NJoined;		// Indicate Adhoc 20MHz N Join.
-
-	// New for WPA, windows want us to to keep association information and
-	// Fixed IEs from last association response
-	NDIS_802_11_ASSOCIATION_INFORMATION     AssocInfo;
-	USHORT       ReqVarIELen;                // Length of next VIE include EID & Length
-	UCHAR       ReqVarIEs[MAX_VIE_LEN];		// The content saved here should be little-endian format.
-	USHORT       ResVarIELen;                // Length of next VIE include EID & Length
-	UCHAR       ResVarIEs[MAX_VIE_LEN];
-
-	UCHAR       RSNIE_Len;
-	UCHAR       RSN_IE[MAX_LEN_OF_RSNIE];	// The content saved here should be little-endian format.
-
-	// New variables used for CCX 1.0
-	BOOLEAN             bCkipOn;
-	BOOLEAN             bCkipCmicOn;
-	UCHAR               CkipFlag;
-	UCHAR               GIV[3];  //for CCX iv
-	UCHAR               RxSEQ[4];
-	UCHAR               TxSEQ[4];
-	UCHAR               CKIPMIC[4];
-	UCHAR               LeapAuthMode;
-	LEAP_AUTH_INFO      LeapAuthInfo;
-	UCHAR               HashPwd[16];
-	UCHAR               NetworkChallenge[8];
-	UCHAR               NetworkChallengeResponse[24];
-	UCHAR               PeerChallenge[8];
-
-	UCHAR               PeerChallengeResponse[24];
-	UCHAR               SessionKey[16]; //Network session keys (NSK)
-	RALINK_TIMER_STRUCT LeapAuthTimer;
-	ROGUEAP_TABLE       RogueApTab;   //Cisco CCX1 Rogue AP Detection
-
-	// New control flags for CCX
-	CCX_CONTROL         CCXControl;                 // Master administration state
-	BOOLEAN             CCXEnable;                  // Actual CCX state
-	UCHAR               CCXScanChannel;             // Selected channel for CCX beacon request
-	USHORT              CCXScanTime;                // Time out to wait for beacon and probe response
-	UCHAR               CCXReqType;                 // Current processing CCX request type
-	BSS_TABLE           CCXBssTab;                  // BSS Table
-	UCHAR               FrameReportBuf[2048];       // Buffer for creating frame report
-	USHORT              FrameReportLen;             // Current Frame report length
-	ULONG               CLBusyBytes;                // Save the total bytes received durning channel load scan time
-	USHORT              RPIDensity[8];              // Array for RPI density collection
-	// Start address of each BSS table within FrameReportBuf
-	// It's important to update the RxPower of the corresponding Bss
-	USHORT              BssReportOffset[MAX_LEN_OF_BSS_TABLE];
-	USHORT              BeaconToken;                // Token for beacon report
-	ULONG               LastBssIndex;               // Most current reported Bss index
-	RM_REQUEST_ACTION   MeasurementRequest[16];     // Saved measurement request
-	UCHAR               RMReqCnt;                   // Number of measurement request saved.
-	UCHAR               CurrentRMReqIdx;            // Number of measurement request saved.
-	BOOLEAN             ParallelReq;                // Parallel measurement, only one request performed,
-													// It must be the same channel with maximum duration
-	USHORT              ParallelDuration;           // Maximum duration for parallel measurement
-	UCHAR               ParallelChannel;            // Only one channel with parallel measurement
-	USHORT              IAPPToken;                  // IAPP dialog token
-	UCHAR               CCXQosECWMin;               // Cisco QOS ECWMin for AC 0
-	UCHAR               CCXQosECWMax;               // Cisco QOS ECWMax for AC 0
-	// Hack for channel load and noise histogram parameters
-	UCHAR               NHFactor;                   // Parameter for Noise histogram
-	UCHAR               CLFactor;                   // Parameter for channel load
-
-	UCHAR               KRK[16];        //Key Refresh Key.
-	UCHAR               BTK[32];        //Base Transient Key
-	BOOLEAN             CCKMLinkUpFlag;
-	ULONG               CCKMRN;    //(Re)Association request number.
-	LARGE_INTEGER       CCKMBeaconAtJoinTimeStamp;  //TSF timer for Re-assocaite to the new AP
-	UCHAR               AironetCellPowerLimit;      //in dBm
-	UCHAR               AironetIPAddress[4];        //eg. 192.168.1.1
-	BOOLEAN             CCXAdjacentAPReportFlag;    //flag for determining report Assoc Lost time
-	CHAR                CCXAdjacentAPSsid[MAX_LEN_OF_SSID]; //Adjacent AP's SSID report
-	UCHAR               CCXAdjacentAPSsidLen;               // the actual ssid length in used
-	UCHAR               CCXAdjacentAPBssid[MAC_ADDR_LEN];         //Adjacent AP's BSSID report
-	USHORT              CCXAdjacentAPChannel;
-	ULONG               CCXAdjacentAPLinkDownTime;  //for Spec S32.
-
-	RALINK_TIMER_STRUCT	StaQuickResponeForRateUpTimer;
-	BOOLEAN				StaQuickResponeForRateUpTimerRunning;
-
-	UCHAR           	DtimCount;      // 0.. DtimPeriod-1
-	UCHAR           	DtimPeriod;     // default = 3
-
-#ifdef QOS_DLS_SUPPORT
-	RT_802_11_DLS		DLSEntry[MAX_NUM_OF_DLS_ENTRY];
-	UCHAR				DlsReplayCounter[8];
-#endif // QOS_DLS_SUPPORT //
-	////////////////////////////////////////////////////////////////////////////////////////
-	// This is only for WHQL test.
-	BOOLEAN				WhqlTest;
-	////////////////////////////////////////////////////////////////////////////////////////
-
-    RALINK_TIMER_STRUCT WpaDisassocAndBlockAssocTimer;
-    // Fast Roaming
-	BOOLEAN		        bFastRoaming;       // 0:disable fast roaming, 1:enable fast roaming
-	CHAR		        dBmToRoam;          // the condition to roam when receiving Rssi less than this value. It's negative value.
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-    BOOLEAN             IEEE8021X;
-    BOOLEAN             IEEE8021x_required_keys;
-    CIPHER_KEY	        DesireSharedKey[4];	// Record user desired WEP keys
-    UCHAR               DesireSharedKeyId;
-
-    // 0: driver ignores wpa_supplicant
-    // 1: wpa_supplicant initiates scanning and AP selection
-    // 2: driver takes care of scanning, AP selection, and IEEE 802.11 association parameters
-    UCHAR               WpaSupplicantUP;
-	UCHAR				WpaSupplicantScanCount;
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-    CHAR                dev_name[16];
-    USHORT              OriDevType;
-
-    BOOLEAN             bTGnWifiTest;
-	BOOLEAN			    bScanReqIsFromWebUI;
-
-	HTTRANSMIT_SETTING				HTPhyMode, MaxHTPhyMode, MinHTPhyMode;// For transmit phy setting in TXWI.
-	DESIRED_TRANSMIT_SETTING       	DesiredTransmitSetting;
-	RT_HT_PHY_INFO					DesiredHtPhyInfo;
-	BOOLEAN							bAutoTxRateSwitch;
-
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-	UCHAR				IEEE80211dClientMode;
-	UCHAR				StaOriCountryCode[3];
-	UCHAR				StaOriGeography;
-#endif // EXT_BUILD_CHANNEL_LIST //
-} STA_ADMIN_CONFIG, *PSTA_ADMIN_CONFIG;
-
-// This data structure keep the current active BSS/IBSS's configuration that this STA
-// had agreed upon joining the network. Which means these parameters are usually decided
-// by the BSS/IBSS creator instead of user configuration. Data in this data structurre
-// is valid only when either ADHOC_ON(pAd) or INFRA_ON(pAd) is TRUE.
-// Normally, after SCAN or failed roaming attempts, we need to recover back to
-// the current active settings.
-typedef struct _STA_ACTIVE_CONFIG {
-	USHORT      Aid;
-	USHORT      AtimWin;                // in kusec; IBSS parameter set element
-	USHORT      CapabilityInfo;
-	USHORT      CfpMaxDuration;
-	USHORT      CfpPeriod;
-
-	// Copy supported rate from desired AP's beacon. We are trying to match
-	// AP's supported and extended rate settings.
-	UCHAR       SupRate[MAX_LEN_OF_SUPPORTED_RATES];
-	UCHAR       ExtRate[MAX_LEN_OF_SUPPORTED_RATES];
-	UCHAR       SupRateLen;
-	UCHAR       ExtRateLen;
-	// Copy supported ht from desired AP's beacon. We are trying to match
-	RT_HT_PHY_INFO		SupportedPhyInfo;
-	RT_HT_CAPABILITY	SupportedHtPhy;
-} STA_ACTIVE_CONFIG, *PSTA_ACTIVE_CONFIG;
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef RT2870
-typedef struct   RT_ADD_PAIRWISE_KEY_ENTRY {
-        NDIS_802_11_MAC_ADDRESS         MacAddr;
-        USHORT                          MacTabMatchWCID;        // ASIC
-        CIPHER_KEY      CipherKey;
-} RT_ADD_PAIRWISE_KEY_ENTRY,*PRT_ADD_PAIRWISE_KEY_ENTRY;
-#endif // RT2870 //
-
-// ----------- start of AP --------------------------
-// AUTH-RSP State Machine Aux data structure
-typedef struct _AP_MLME_AUX {
-	UCHAR               Addr[MAC_ADDR_LEN];
-	USHORT              Alg;
-	CHAR                Challenge[CIPHER_TEXT_LEN];
-} AP_MLME_AUX, *PAP_MLME_AUX;
-
-// structure to define WPA Group Key Rekey Interval
-typedef struct PACKED _RT_802_11_WPA_REKEY {
-	ULONG ReKeyMethod;          // mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based
-	ULONG ReKeyInterval;        // time-based: seconds, packet-based: kilo-packets
-} RT_WPA_REKEY,*PRT_WPA_REKEY, RT_802_11_WPA_REKEY, *PRT_802_11_WPA_REKEY;
-
-typedef struct _MAC_TABLE_ENTRY {
-	//Choose 1 from ValidAsWDS and ValidAsCLI  to validize.
-	BOOLEAN		ValidAsCLI;		// Sta mode, set this TRUE after Linkup,too.
-	BOOLEAN		ValidAsWDS;	// This is WDS Entry. only for AP mode.
-	BOOLEAN		ValidAsApCli;   //This is a AP-Client entry, only for AP mode which enable AP-Client functions.
-	BOOLEAN		ValidAsMesh;
-	BOOLEAN		ValidAsDls;	// This is DLS Entry. only for STA mode.
-	BOOLEAN		isCached;
-	BOOLEAN		bIAmBadAtheros;
-
-	UCHAR         	EnqueueEapolStartTimerRunning;  // Enqueue EAPoL-Start for triggering EAP SM
-	//jan for wpa
-	// record which entry revoke MIC Failure , if it leaves the BSS itself, AP won't update aMICFailTime MIB
-	UCHAR           CMTimerRunning;
-	UCHAR           apidx;			// MBSS number
-	UCHAR           RSNIE_Len;
-	UCHAR           RSN_IE[MAX_LEN_OF_RSNIE];
-	UCHAR           ANonce[LEN_KEY_DESC_NONCE];
-	UCHAR           R_Counter[LEN_KEY_DESC_REPLAY];
-	UCHAR           PTK[64];
-	UCHAR           ReTryCounter;
-	RALINK_TIMER_STRUCT                 RetryTimer;
-	RALINK_TIMER_STRUCT					EnqueueStartForPSKTimer;	// A timer which enqueue EAPoL-Start for triggering PSK SM
-	NDIS_802_11_AUTHENTICATION_MODE     AuthMode;   // This should match to whatever microsoft defined
-	NDIS_802_11_WEP_STATUS              WepStatus;
-	AP_WPA_STATE    WpaState;
-	GTK_STATE       GTKState;
-	USHORT          PortSecured;
-	NDIS_802_11_PRIVACY_FILTER  PrivacyFilter;      // PrivacyFilter enum for 802.1X
-	CIPHER_KEY      PairwiseKey;
-	PVOID           pAd;
-    INT				PMKID_CacheIdx;
-    UCHAR			PMKID[LEN_PMKID];
-
-
-	UCHAR           Addr[MAC_ADDR_LEN];
-	UCHAR           PsMode;
-	SST             Sst;
-	AUTH_STATE      AuthState; // for SHARED KEY authentication state machine used only
-	BOOLEAN			IsReassocSta;	// Indicate whether this is a reassociation procedure
-	USHORT          Aid;
-	USHORT          CapabilityInfo;
-	UCHAR           LastRssi;
-	ULONG           NoDataIdleCount;
-	UINT16			StationKeepAliveCount; // unit: second
-	ULONG           PsQIdleCount;
-	QUEUE_HEADER    PsQueue;
-
-	UINT32			StaConnectTime;		// the live time of this station since associated with AP
-
-
-#ifdef DOT11_N_SUPPORT
-	BOOLEAN			bSendBAR;
-	USHORT			NoBADataCountDown;
-
-	UINT32   		CachedBuf[16];		// UINT (4 bytes) for alignment
-	UINT			TxBFCount; // 3*3
-#endif // DOT11_N_SUPPORT //
-	UINT			FIFOCount;
-	UINT			DebugFIFOCount;
-	UINT			DebugTxCount;
-    BOOLEAN			bDlsInit;
-
-
-//====================================================
-//WDS entry needs these
-// rt2860 add this. if ValidAsWDS==TRUE, MatchWDSTabIdx is the index in WdsTab.MacTab
-	UINT			MatchWDSTabIdx;
-	UCHAR           MaxSupportedRate;
-	UCHAR           CurrTxRate;
-	UCHAR           CurrTxRateIndex;
-	// to record the each TX rate's quality. 0 is best, the bigger the worse.
-	USHORT          TxQuality[MAX_STEP_OF_TX_RATE_SWITCH];
-//	USHORT          OneSecTxOkCount;
-	UINT32			OneSecTxNoRetryOkCount;
-	UINT32          OneSecTxRetryOkCount;
-	UINT32          OneSecTxFailCount;
-	UINT32			ContinueTxFailCnt;
-	UINT32          CurrTxRateStableTime; // # of second in current TX rate
-	UCHAR           TxRateUpPenalty;      // extra # of second penalty due to last unstable condition
-//====================================================
-
-
-
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-	UINT			MatchDlsEntryIdx; // indicate the index in pAd->StaCfg.DLSEntry
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
-	BOOLEAN         fNoisyEnvironment;
-	BOOLEAN			fLastSecAccordingRSSI;
-	UCHAR           LastSecTxRateChangeAction; // 0: no change, 1:rate UP, 2:rate down
-	CHAR			LastTimeTxRateChangeAction; //Keep last time value of LastSecTxRateChangeAction
-	ULONG			LastTxOkCount;
-	UCHAR           PER[MAX_STEP_OF_TX_RATE_SWITCH];
-
-	// a bitmap of BOOLEAN flags. each bit represent an operation status of a particular
-	// BOOLEAN control, either ON or OFF. These flags should always be accessed via
-	// CLIENT_STATUS_TEST_FLAG(), CLIENT_STATUS_SET_FLAG(), CLIENT_STATUS_CLEAR_FLAG() macros.
-	// see fOP_STATUS_xxx in RTMP_DEF.C for detail bit definition. fCLIENT_STATUS_AMSDU_INUSED
-	ULONG           ClientStatusFlags;
-
-	// TODO: Shall we move that to DOT11_N_SUPPORT???
-	HTTRANSMIT_SETTING	HTPhyMode, MaxHTPhyMode, MinHTPhyMode;// For transmit phy setting in TXWI.
-
-#ifdef DOT11_N_SUPPORT
-	// HT EWC MIMO-N used parameters
-	USHORT		RXBAbitmap;	// fill to on-chip  RXWI_BA_BITMASK in 8.1.3RX attribute entry format
-	USHORT		TXBAbitmap;	// This bitmap as originator, only keep in software used to mark AMPDU bit in TXWI
-	USHORT		TXAutoBAbitmap;
-	USHORT		BADeclineBitmap;
-	USHORT		BARecWcidArray[NUM_OF_TID];	// The mapping wcid of recipient session. if RXBAbitmap bit is masked
-	USHORT		BAOriWcidArray[NUM_OF_TID]; // The mapping wcid of originator session. if TXBAbitmap bit is masked
-	USHORT		BAOriSequence[NUM_OF_TID]; // The mapping wcid of originator session. if TXBAbitmap bit is masked
-
-	// 802.11n features.
-	UCHAR		MpduDensity;
-	UCHAR		MaxRAmpduFactor;
-	UCHAR		AMsduSize;
-	UCHAR		MmpsMode;	// MIMO power save more.
-
-	HT_CAPABILITY_IE		HTCapability;
-
-#ifdef DOT11N_DRAFT3
-	UCHAR		BSS2040CoexistenceMgmtSupport;
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
-
-	BOOLEAN		bAutoTxRateSwitch;
-
-	UCHAR       RateLen;
-	struct _MAC_TABLE_ENTRY *pNext;
-    USHORT      TxSeq[NUM_OF_TID];
-	USHORT		NonQosDataSeq;
-
-	RSSI_SAMPLE	RssiSample;
-
-	UINT32			TXMCSExpected[16];
-	UINT32			TXMCSSuccessful[16];
-	UINT32			TXMCSFailed[16];
-	UINT32			TXMCSAutoFallBack[16][16];
-
-#ifdef CONFIG_STA_SUPPORT
-        ULONG                   LastBeaconRxTime;
-#endif // CONFIG_STA_SUPPORT //
-} MAC_TABLE_ENTRY, *PMAC_TABLE_ENTRY;
-
-typedef struct _MAC_TABLE {
-	USHORT			Size;
-	MAC_TABLE_ENTRY *Hash[HASH_TABLE_SIZE];
-	MAC_TABLE_ENTRY Content[MAX_LEN_OF_MAC_TABLE];
-	QUEUE_HEADER    McastPsQueue;
-	ULONG           PsQIdleCount;
-	BOOLEAN         fAnyStationInPsm;
-	BOOLEAN         fAnyStationBadAtheros;	// Check if any Station is atheros 802.11n Chip.  We need to use RTS/CTS with Atheros 802,.11n chip.
-	BOOLEAN			fAnyTxOPForceDisable;	// Check if it is necessary to disable BE TxOP
-	BOOLEAN			fAllStationAsRalink; 	// Check if all stations are ralink-chipset
-#ifdef DOT11_N_SUPPORT
-	BOOLEAN         fAnyStationIsLegacy;	// Check if I use legacy rate to transmit to my BSS Station/
-	BOOLEAN         fAnyStationNonGF;		// Check if any Station can't support GF.
-	BOOLEAN         fAnyStation20Only;		// Check if any Station can't support GF.
-	BOOLEAN			fAnyStationMIMOPSDynamic; // Check if any Station is MIMO Dynamic
-	BOOLEAN         fAnyBASession;   // Check if there is BA session.  Force turn on RTS/CTS
-#endif // DOT11_N_SUPPORT //
-} MAC_TABLE, *PMAC_TABLE;
-
-#ifdef DOT11_N_SUPPORT
-#define IS_HT_STA(_pMacEntry)	\
-	(_pMacEntry->MaxHTPhyMode.field.MODE >= MODE_HTMIX)
-
-#define IS_HT_RATE(_pMacEntry)	\
-	(_pMacEntry->HTPhyMode.field.MODE >= MODE_HTMIX)
-
-#define PEER_IS_HT_RATE(_pMacEntry)	\
-	(_pMacEntry->HTPhyMode.field.MODE >= MODE_HTMIX)
-#endif // DOT11_N_SUPPORT //
-
-typedef struct _WDS_ENTRY {
-	BOOLEAN         Valid;
-	UCHAR           Addr[MAC_ADDR_LEN];
-	ULONG           NoDataIdleCount;
-	struct _WDS_ENTRY *pNext;
-} WDS_ENTRY, *PWDS_ENTRY;
-
-typedef struct  _WDS_TABLE_ENTRY {
-	USHORT			Size;
-	UCHAR           WdsAddr[MAC_ADDR_LEN];
-	WDS_ENTRY       *Hash[HASH_TABLE_SIZE];
-	WDS_ENTRY       Content[MAX_LEN_OF_MAC_TABLE];
-	UCHAR           MaxSupportedRate;
-	UCHAR           CurrTxRate;
-	USHORT          TxQuality[MAX_LEN_OF_SUPPORTED_RATES];
-	USHORT          OneSecTxOkCount;
-	USHORT          OneSecTxRetryOkCount;
-	USHORT          OneSecTxFailCount;
-	ULONG           CurrTxRateStableTime; // # of second in current TX rate
-	UCHAR           TxRateUpPenalty;      // extra # of second penalty due to last unstable condition
-} WDS_TABLE_ENTRY, *PWDS_TABLE_ENTRY;
-
-typedef struct _RT_802_11_WDS_ENTRY {
-	PNET_DEV			dev;
-	UCHAR				Valid;
-	UCHAR				PhyMode;
-	UCHAR				PeerWdsAddr[MAC_ADDR_LEN];
-	UCHAR				MacTabMatchWCID;	// ASIC
-	NDIS_802_11_WEP_STATUS  WepStatus;
-	UCHAR					KeyIdx;
-	CIPHER_KEY          	WdsKey;
-	HTTRANSMIT_SETTING				HTPhyMode, MaxHTPhyMode, MinHTPhyMode;
-	RT_HT_PHY_INFO					DesiredHtPhyInfo;
-	BOOLEAN							bAutoTxRateSwitch;
-	DESIRED_TRANSMIT_SETTING       	DesiredTransmitSetting; // Desired transmit setting.
-} RT_802_11_WDS_ENTRY, *PRT_802_11_WDS_ENTRY;
-
-typedef struct _WDS_TABLE {
-	UCHAR               Mode;
-	ULONG               Size;
-	RT_802_11_WDS_ENTRY	WdsEntry[MAX_WDS_ENTRY];
-} WDS_TABLE, *PWDS_TABLE;
-
-typedef struct _APCLI_STRUCT {
-	PNET_DEV				dev;
-#ifdef RTL865X_SOC
-	unsigned int            mylinkid;
-#endif
-	BOOLEAN                 Enable;	// Set it as 1 if the apcli interface was configured to "1"  or by iwpriv cmd "ApCliEnable"
-	BOOLEAN                 Valid;	// Set it as 1 if the apcli interface associated success to remote AP.
-	UCHAR					MacTabWCID;	//WCID value, which point to the entry of ASIC Mac table.
-	UCHAR                   SsidLen;
-	CHAR                    Ssid[MAX_LEN_OF_SSID];
-
-	UCHAR                   CfgSsidLen;
-	CHAR                    CfgSsid[MAX_LEN_OF_SSID];
-	UCHAR                   CfgApCliBssid[ETH_LENGTH_OF_ADDRESS];
-	UCHAR                   CurrentAddress[ETH_LENGTH_OF_ADDRESS];
-
-	ULONG                   ApCliRcvBeaconTime;
-
-	ULONG                   CtrlCurrState;
-	ULONG                   SyncCurrState;
-	ULONG                   AuthCurrState;
-	ULONG                   AssocCurrState;
-	ULONG					WpaPskCurrState;
-
-	USHORT                  AuthReqCnt;
-	USHORT                  AssocReqCnt;
-
-	ULONG                   ClientStatusFlags;
-	UCHAR                   MpduDensity;
-
-	NDIS_802_11_AUTHENTICATION_MODE     AuthMode;   // This should match to whatever microsoft defined
-	NDIS_802_11_WEP_STATUS              WepStatus;
-
-	// Add to support different cipher suite for WPA2/WPA mode
-	NDIS_802_11_ENCRYPTION_STATUS		GroupCipher;		// Multicast cipher suite
-	NDIS_802_11_ENCRYPTION_STATUS		PairCipher;			// Unicast cipher suite
-	BOOLEAN								bMixCipher;			// Indicate current Pair & Group use different cipher suites
-	USHORT								RsnCapability;
-
-	UCHAR		PSK[100];				// reserve PSK key material
-	UCHAR       PSKLen;
-	UCHAR       PMK[32];                // WPA PSK mode PMK
-	//UCHAR       PTK[64];                // WPA PSK mode PTK
-	UCHAR		GTK[32];				// GTK from authenticator
-
-	//CIPHER_KEY		PairwiseKey;
-	CIPHER_KEY      SharedKey[SHARE_KEY_NUM];
-	UCHAR           DefaultKeyId;
-
-	// WPA 802.1x port control, WPA_802_1X_PORT_SECURED, WPA_802_1X_PORT_NOT_SECURED
-	//UCHAR       PortSecured;
-
-	// store RSN_IE built by driver
-	UCHAR		RSN_IE[MAX_LEN_OF_RSNIE];  // The content saved here should be convert to little-endian format.
-	UCHAR		RSNIE_Len;
-
-	// For WPA countermeasures
-	ULONG       LastMicErrorTime;   // record last MIC error time
-	//ULONG       MicErrCnt;          // Should be 0, 1, 2, then reset to zero (after disassoiciation).
-	BOOLEAN                 bBlockAssoc; // Block associate attempt for 60 seconds after counter measure occurred.
-
-	// For WPA-PSK supplicant state
-	//WPA_STATE   	WpaState;           // Default is SS_NOTUSE
-	//UCHAR       	ReplayCounter[8];
-	//UCHAR       	ANonce[32];         // ANonce for WPA-PSK from authenticator
-	UCHAR       	SNonce[32];         // SNonce for WPA-PSK
-	UCHAR			GNonce[32];			// GNonce for WPA-PSK from authenticator
-
-	HTTRANSMIT_SETTING				HTPhyMode, MaxHTPhyMode, MinHTPhyMode;
-	RT_HT_PHY_INFO					DesiredHtPhyInfo;
-	BOOLEAN							bAutoTxRateSwitch;
-	DESIRED_TRANSMIT_SETTING       	DesiredTransmitSetting; // Desired transmit setting.
-} APCLI_STRUCT, *PAPCLI_STRUCT;
-
-// ----------- end of AP ----------------------------
-
-#ifdef BLOCK_NET_IF
-typedef struct _BLOCK_QUEUE_ENTRY
-{
-	BOOLEAN SwTxQueueBlockFlag;
-	LIST_HEADER NetIfList;
-} BLOCK_QUEUE_ENTRY, *PBLOCK_QUEUE_ENTRY;
-#endif // BLOCK_NET_IF //
-
-
-struct wificonf
-{
-	BOOLEAN	bShortGI;
-	BOOLEAN bGreenField;
-};
-
-
-
-
-typedef struct _INF_PCI_CONFIG
-{
-	PUCHAR                  CSRBaseAddress;     // PCI MMIO Base Address, all access will use
-}INF_PCI_CONFIG;
-
-typedef struct _INF_USB_CONFIG
-{
-	UINT                BulkInEpAddr;		// bulk-in endpoint address
-	UINT                BulkOutEpAddr[6];	// bulk-out endpoint address
-
-}INF_USB_CONFIG;
-
-#ifdef IKANOS_VX_1X0
-	typedef void (*IkanosWlanTxCbFuncP)(void *, void *);
-
-	struct IKANOS_TX_INFO
-	{
-		struct net_device *netdev;
-		IkanosWlanTxCbFuncP *fp;
-	};
-#endif // IKANOS_VX_1X0 //
-
-#ifdef NINTENDO_AP
-typedef struct _NINDO_CTRL_BLOCK {
-
-	RT_NINTENDO_TABLE	DS_TABLE;
-
-#ifdef CHIP25XX
-	spinlock_t			NINTENDO_TABLE_Lock;
-#else
-	NDIS_SPIN_LOCK		NINTENDO_TABLE_Lock;
-#endif // CHIP25XX //
-
-	UCHAR				NINTENDO_UP_BUFFER[512];
-	UCHAR				Local_KeyIdx;
-	CIPHER_KEY			Local_SharedKey;
-	UCHAR				Local_bHideSsid;
-	UCHAR				Local_AuthMode;
-	UCHAR				Local_WepStatus;
-	USHORT				Local_CapabilityInfo;
-} NINDO_CTRL_BLOCK;
-#endif // NINTENDO_AP //
-
-
-#ifdef DBG_DIAGNOSE
-#define DIAGNOSE_TIME	10   // 10 sec
-typedef struct _RtmpDiagStrcut_
-{	// Diagnosis Related element
-	unsigned char		inited;
-	unsigned char 	qIdx;
-	unsigned char 	ArrayStartIdx;
-	unsigned char		ArrayCurIdx;
-	// Tx Related Count
-	USHORT			TxDataCnt[DIAGNOSE_TIME];
-	USHORT			TxFailCnt[DIAGNOSE_TIME];
-//	USHORT			TxDescCnt[DIAGNOSE_TIME][16];		// TxDesc queue length in scale of 0~14, >=15
-	USHORT			TxDescCnt[DIAGNOSE_TIME][24]; // 3*3	// TxDesc queue length in scale of 0~14, >=15
-//	USHORT			TxMcsCnt[DIAGNOSE_TIME][16];			// TxDate MCS Count in range from 0 to 15, step in 1.
-	USHORT			TxMcsCnt[DIAGNOSE_TIME][24]; // 3*3
-	USHORT			TxSWQueCnt[DIAGNOSE_TIME][9];		// TxSwQueue length in scale of 0, 1, 2, 3, 4, 5, 6, 7, >=8
-
-	USHORT			TxAggCnt[DIAGNOSE_TIME];
-	USHORT			TxNonAggCnt[DIAGNOSE_TIME];
-//	USHORT			TxAMPDUCnt[DIAGNOSE_TIME][16];		// 10 sec, TxDMA APMDU Aggregation count in range from 0 to 15, in setp of 1.
-	USHORT			TxAMPDUCnt[DIAGNOSE_TIME][24]; // 3*3 // 10 sec, TxDMA APMDU Aggregation count in range from 0 to 15, in setp of 1.
-	USHORT			TxRalinkCnt[DIAGNOSE_TIME];			// TxRalink Aggregation Count in 1 sec scale.
-	USHORT			TxAMSDUCnt[DIAGNOSE_TIME];			// TxAMSUD Aggregation Count in 1 sec scale.
-
-	// Rx Related Count
-	USHORT			RxDataCnt[DIAGNOSE_TIME];			// Rx Total Data count.
-	USHORT			RxCrcErrCnt[DIAGNOSE_TIME];
-//	USHORT			RxMcsCnt[DIAGNOSE_TIME][16];		// Rx MCS Count in range from 0 to 15, step in 1.
-	USHORT			RxMcsCnt[DIAGNOSE_TIME][24]; // 3*3
-}RtmpDiagStruct;
-#endif // DBG_DIAGNOSE //
-
-
-//
-//  The miniport adapter structure
-//
-typedef struct _RTMP_ADAPTER
-{
-	PVOID					OS_Cookie;	// save specific structure relative to OS
-	PNET_DEV				net_dev;
-	ULONG					VirtualIfCnt;
-
-
-
-	NDIS_SPIN_LOCK          irq_lock;
-	UCHAR                   irq_disabled;
-
-#ifdef RT2870
-/*****************************************************************************************/
-/*      USB related parameters                                                           */
-/*****************************************************************************************/
-	struct usb_config_descriptor		*config;
-	UINT								BulkInEpAddr;		// bulk-in endpoint address
-	UINT								BulkOutEpAddr[6];	// bulk-out endpoint address
-
-	UINT								NumberOfPipes;
-	USHORT								BulkOutMaxPacketSize;
-	USHORT								BulkInMaxPacketSize;
-
-	//======Control Flags
-	LONG                    	PendingIoCount;
-	ULONG						BulkFlags;
-	BOOLEAN                     bUsbTxBulkAggre;	// Flags for bulk out data priority
-
-
-	//======Timer Thread
-	RT2870_TIMER_QUEUE		TimerQ;
-	NDIS_SPIN_LOCK			TimerQLock;
-
-
-	//======Cmd Thread
-	CmdQ					CmdQ;
-	NDIS_SPIN_LOCK			CmdQLock;				// CmdQLock spinlock
-
-	BOOLEAN					TimerFunc_kill;
-	BOOLEAN					mlme_kill;
-
-
-	//======Semaphores (event)
-	struct semaphore			mlme_semaphore;			/* to sleep thread on	*/
-	struct semaphore			RTUSBCmd_semaphore;		/* to sleep thread on	*/
-	struct semaphore			RTUSBTimer_semaphore;
-#ifdef INF_AMAZON_SE
-	struct semaphore			UsbVendorReq_semaphore;
-	PVOID						UsbVendorReqBuf;
-#endif // INF_AMAZON_SE //
-	struct completion			TimerQComplete;
-	struct completion			mlmeComplete;
-	struct completion			CmdQComplete;
-	wait_queue_head_t			*wait;
-
-	//======Lock for 2870 ATE
-#ifdef RALINK_ATE
-	NDIS_SPIN_LOCK			GenericLock;		// ATE Tx/Rx generic spinlock
-#endif // RALINK_ATE //
-
-#endif // RT2870 //
-
-
-/*****************************************************************************************/
-	/*      Both PCI/USB related parameters                                                  */
-/*****************************************************************************************/
-
-
-/*****************************************************************************************/
-/*      Tx related parameters                                                           */
-/*****************************************************************************************/
-	BOOLEAN                 DeQueueRunning[NUM_OF_TX_RING];  // for ensuring RTUSBDeQueuePacket get call once
-	NDIS_SPIN_LOCK          DeQueueLock[NUM_OF_TX_RING];
-
-#ifdef RT2870
-	// Data related context and AC specified, 4 AC supported
-	NDIS_SPIN_LOCK			BulkOutLock[6];			// BulkOut spinlock for 4 ACs
-	NDIS_SPIN_LOCK			MLMEBulkOutLock;	// MLME BulkOut lock
-
-	HT_TX_CONTEXT			TxContext[NUM_OF_TX_RING];
-	NDIS_SPIN_LOCK			TxContextQueueLock[NUM_OF_TX_RING];		// TxContextQueue spinlock
-
-	// 4 sets of Bulk Out index and pending flag
-	UCHAR					NextBulkOutIndex[4];	// only used for 4 EDCA bulkout pipe
-
-	BOOLEAN					BulkOutPending[6];	// used for total 6 bulkout pipe
-	UCHAR					bulkResetPipeid;
-	BOOLEAN					MgmtBulkPending;
-	ULONG					bulkResetReq[6];
-#endif // RT2870 //
-
-	// resource for software backlog queues
-	QUEUE_HEADER            TxSwQueue[NUM_OF_TX_RING];  // 4 AC + 1 HCCA
-	NDIS_SPIN_LOCK          TxSwQueueLock[NUM_OF_TX_RING];	// TxSwQueue spinlock
-
-	RTMP_DMABUF             MgmtDescRing;               	// Shared memory for MGMT descriptors
-	RTMP_MGMT_RING          MgmtRing;
-	NDIS_SPIN_LOCK          MgmtRingLock;               	// Prio Ring spinlock
-
-
-/*****************************************************************************************/
-/*      Rx related parameters                                                           */
-/*****************************************************************************************/
-
-
-#ifdef RT2870
-	RX_CONTEXT				RxContext[RX_RING_SIZE];  // 1 for redundant multiple IRP bulk in.
-	NDIS_SPIN_LOCK			BulkInLock;				// BulkIn spinlock for 4 ACs
-	UCHAR					PendingRx;				// The Maxima pending Rx value should be 	RX_RING_SIZE.
-	UCHAR					NextRxBulkInIndex;		// Indicate the current RxContext Index which hold by Host controller.
-	UCHAR					NextRxBulkInReadIndex;	// Indicate the current RxContext Index which driver can read & process it.
-	ULONG					NextRxBulkInPosition;   // Want to contatenate 2 URB buffer while 1st is bulkin failed URB. This Position is 1st URB TransferLength.
-	ULONG					TransferBufferLength;	// current length of the packet buffer
-	ULONG					ReadPosition;			// current read position in a packet buffer
-#endif // RT2870 //
-
-
-/*****************************************************************************************/
-/*      ASIC related parameters                                                          */
-/*****************************************************************************************/
-	UINT32               	MACVersion;      	// MAC version. Record rt2860C(0x28600100) or rt2860D (0x28600101)..
-
-	// ---------------------------
-	// E2PROM
-	// ---------------------------
-	ULONG                   EepromVersion;          // byte 0: version, byte 1: revision, byte 2~3: unused
-	UCHAR                   EEPROMAddressNum;       // 93c46=6  93c66=8
-	USHORT                  EEPROMDefaultValue[NUM_EEPROM_BBP_PARMS];
-	BOOLEAN                 EepromAccess;
-	UCHAR                   EFuseTag;
-	ULONG                   FirmwareVersion;        // byte 0: Minor version, byte 1: Major version, otherwise unused.
-
-	// ---------------------------
-	// BBP Control
-	// ---------------------------
-	UCHAR                   BbpWriteLatch[140];     // record last BBP register value written via BBP_IO_WRITE/BBP_IO_WRITE_VY_REG_ID
-	UCHAR                   BbpRssiToDbmDelta;
-	BBP_R66_TUNING          BbpTuning;
-
-	// ----------------------------
-	// RFIC control
-	// ----------------------------
-	UCHAR                   RfIcType;       // RFIC_xxx
-	ULONG                   RfFreqOffset;   // Frequency offset for channel switching
-	RTMP_RF_REGS            LatchRfRegs;    // latch th latest RF programming value since RF IC doesn't support READ
-
-	EEPROM_ANTENNA_STRUC    Antenna;                            // Since ANtenna definition is different for a & g. We need to save it for future reference.
-	EEPROM_NIC_CONFIG2_STRUC    NicConfig2;
-
-	// This soft Rx Antenna Diversity mechanism is used only when user set
-	// RX Antenna = DIVERSITY ON
-	SOFT_RX_ANT_DIVERSITY   RxAnt;
-
-	UCHAR                   RFProgSeq;
-	CHANNEL_TX_POWER        TxPower[MAX_NUM_OF_CHANNELS];       // Store Tx power value for all channels.
-	CHANNEL_TX_POWER        ChannelList[MAX_NUM_OF_CHANNELS];   // list all supported channels for site survey
-	CHANNEL_11J_TX_POWER    TxPower11J[MAX_NUM_OF_11JCHANNELS];       // 802.11j channel and bw
-	CHANNEL_11J_TX_POWER    ChannelList11J[MAX_NUM_OF_11JCHANNELS];   // list all supported channels for site survey
-
-	UCHAR                   ChannelListNum;                     // number of channel in ChannelList[]
-	UCHAR					Bbp94;
-	BOOLEAN					BbpForCCK;
-	ULONG		Tx20MPwrCfgABand[5];
-	ULONG		Tx20MPwrCfgGBand[5];
-	ULONG		Tx40MPwrCfgABand[5];
-	ULONG		Tx40MPwrCfgGBand[5];
-
-	BOOLEAN     bAutoTxAgcA;                // Enable driver auto Tx Agc control
-	UCHAR	    TssiRefA;					// Store Tssi reference value as 25 temperature.
-	UCHAR	    TssiPlusBoundaryA[5];		// Tssi boundary for increase Tx power to compensate.
-	UCHAR	    TssiMinusBoundaryA[5];		// Tssi boundary for decrease Tx power to compensate.
-	UCHAR	    TxAgcStepA;					// Store Tx TSSI delta increment / decrement value
-	CHAR		TxAgcCompensateA;			// Store the compensation (TxAgcStep * (idx-1))
-
-	BOOLEAN     bAutoTxAgcG;                // Enable driver auto Tx Agc control
-	UCHAR	    TssiRefG;					// Store Tssi reference value as 25 temperature.
-	UCHAR	    TssiPlusBoundaryG[5];		// Tssi boundary for increase Tx power to compensate.
-	UCHAR	    TssiMinusBoundaryG[5];		// Tssi boundary for decrease Tx power to compensate.
-	UCHAR	    TxAgcStepG;					// Store Tx TSSI delta increment / decrement value
-	CHAR		TxAgcCompensateG;			// Store the compensation (TxAgcStep * (idx-1))
-
-	//+++For RT2870, the parameteres is start from BGRssiOffset1 ~ BGRssiOffset3
-	CHAR		BGRssiOffset0;				// Store B/G RSSI#0 Offset value on EEPROM 0x46h
-	CHAR		BGRssiOffset1;				// Store B/G RSSI#1 Offset value
-	CHAR		BGRssiOffset2;				// Store B/G RSSI#2 Offset value
-	//---
-
-	//+++For RT2870, the parameteres is start from ARssiOffset1 ~ ARssiOffset3
-	CHAR		ARssiOffset0;				// Store A RSSI#0 Offset value on EEPROM 0x4Ah
-	CHAR		ARssiOffset1;				// Store A RSSI#1 Offset value
-	CHAR		ARssiOffset2;				// Store A RSSI#2 Offset value
-	//---
-
-	CHAR		BLNAGain;					// Store B/G external LNA#0 value on EEPROM 0x44h
-	CHAR		ALNAGain0;					// Store A external LNA#0 value for ch36~64
-	CHAR		ALNAGain1;					// Store A external LNA#1 value for ch100~128
-	CHAR		ALNAGain2;					// Store A external LNA#2 value for ch132~165
-
-	// ----------------------------
-	// LED control
-	// ----------------------------
-	MCU_LEDCS_STRUC		LedCntl;
-	USHORT				Led1;	// read from EEPROM 0x3c
-	USHORT				Led2;	// EEPROM 0x3e
-	USHORT				Led3;	// EEPROM 0x40
-	UCHAR				LedIndicatorStregth;
-	UCHAR				RssiSingalstrengthOffet;
-    BOOLEAN				bLedOnScanning;
-	UCHAR				LedStatus;
-
-/*****************************************************************************************/
-/*      802.11 related parameters                                                        */
-/*****************************************************************************************/
-	// outgoing BEACON frame buffer and corresponding TXD
-	TXWI_STRUC              	BeaconTxWI;
-	PUCHAR						BeaconBuf;
-	USHORT						BeaconOffset[HW_BEACON_MAX_COUNT];
-
-	// pre-build PS-POLL and NULL frame upon link up. for efficiency purpose.
-	PSPOLL_FRAME            	PsPollFrame;
-	HEADER_802_11           	NullFrame;
-
-#ifdef RT2870
-	TX_CONTEXT				BeaconContext[BEACON_RING_SIZE];
-	TX_CONTEXT				NullContext;
-	TX_CONTEXT				PsPollContext;
-	TX_CONTEXT				RTSContext;
-#endif // RT2870 //
-
-
-
-//=========AP===========
-
-
-//=======STA===========
-#ifdef CONFIG_STA_SUPPORT
-/* Modified by Wu Xi-Kun 4/21/2006 */
-	// -----------------------------------------------
-	// STA specific configuration & operation status
-	// used only when pAd->OpMode == OPMODE_STA
-	// -----------------------------------------------
-	STA_ADMIN_CONFIG        StaCfg;           // user desired settings
-	STA_ACTIVE_CONFIG       StaActive;         // valid only when ADHOC_ON(pAd) || INFRA_ON(pAd)
-	CHAR                    nickname[IW_ESSID_MAX_SIZE+1]; // nickname, only used in the iwconfig i/f
-	NDIS_MEDIA_STATE        PreMediaState;
-#endif // CONFIG_STA_SUPPORT //
-
-//=======Common===========
-	// OP mode: either AP or STA
-	UCHAR                   OpMode;                     // OPMODE_STA, OPMODE_AP
-
-	NDIS_MEDIA_STATE        IndicateMediaState;			// Base on Indication state, default is NdisMediaStateDisConnected
-
-
-	// MAT related parameters
-
-	// configuration: read from Registry & E2PROM
-	BOOLEAN                 bLocalAdminMAC;             // Use user changed MAC
-	UCHAR                   PermanentAddress[MAC_ADDR_LEN];    // Factory default MAC address
-	UCHAR                   CurrentAddress[MAC_ADDR_LEN];      // User changed MAC address
-
-	// ------------------------------------------------------
-	// common configuration to both OPMODE_STA and OPMODE_AP
-	// ------------------------------------------------------
-	COMMON_CONFIG           CommonCfg;
-	MLME_STRUCT             Mlme;
-
-	// AP needs those vaiables for site survey feature.
-	MLME_AUX                MlmeAux;           // temporary settings used during MLME state machine
-	BSS_TABLE               ScanTab;           // store the latest SCAN result
-
-	//About MacTab, the sta driver will use #0 and #1 for multicast and AP.
-	MAC_TABLE                 MacTab;     // ASIC on-chip WCID entry table.  At TX, ASIC always use key according to this on-chip table.
-	NDIS_SPIN_LOCK          MacTabLock;
-
-#ifdef DOT11_N_SUPPORT
-	BA_TABLE			BATable;
-#endif // DOT11_N_SUPPORT //
-	NDIS_SPIN_LOCK          BATabLock;
-	RALINK_TIMER_STRUCT RECBATimer;
-
-	// encryption/decryption KEY tables
-	CIPHER_KEY              SharedKey[MAX_MBSSID_NUM][4]; // STA always use SharedKey[BSS0][0..3]
-
-		// RX re-assembly buffer for fragmentation
-	FRAGMENT_FRAME          FragFrame;                  // Frame storage for fragment frame
-
-	// various Counters
-	COUNTER_802_3           Counters8023;               // 802.3 counters
-	COUNTER_802_11          WlanCounters;               // 802.11 MIB counters
-	COUNTER_RALINK          RalinkCounters;             // Ralink propriety counters
-	COUNTER_DRS             DrsCounters;                // counters for Dynamic TX Rate Switching
-	PRIVATE_STRUC           PrivateInfo;                // Private information & counters
-
-	// flags, see fRTMP_ADAPTER_xxx flags
-	ULONG                   Flags;                      // Represent current device status
-
-	// current TX sequence #
-	USHORT                  Sequence;
-
-#ifdef UNDER_CE
-	NDIS_HANDLE             hGiISR;
-#endif
-
-
-	// Control disconnect / connect event generation
-	//+++Didn't used anymore
-	ULONG                   LinkDownTime;
-	//---
-	ULONG                   LastRxRate;
-	ULONG                   LastTxRate;
-	//+++Used only for Station
-	BOOLEAN                 bConfigChanged;         // Config Change flag for the same SSID setting
-	//---
-
-	ULONG                   ExtraInfo;              // Extra information for displaying status
-	ULONG                   SystemErrorBitmap;      // b0: E2PROM version error
-
-	//+++Didn't used anymore
-	ULONG                   MacIcVersion;           // MAC/BBP serial interface issue solved after ver.D
-	//---
-
-	// ---------------------------
-	// System event log
-	// ---------------------------
-	RT_802_11_EVENT_TABLE   EventTab;
-
-
-	BOOLEAN		HTCEnable;
-
-	/*****************************************************************************************/
-	/*      Statistic related parameters                                                     */
-	/*****************************************************************************************/
-#ifdef RT2870
-	ULONG						BulkOutDataOneSecCount;
-	ULONG						BulkInDataOneSecCount;
-	ULONG						BulkLastOneSecCount; // BulkOutDataOneSecCount + BulkInDataOneSecCount
-	ULONG						watchDogRxCnt;
-	ULONG						watchDogRxOverFlowCnt;
-	ULONG						watchDogTxPendingCnt[NUM_OF_TX_RING];
-#endif // RT2870 //
-
-	BOOLEAN						bUpdateBcnCntDone;
-	ULONG						watchDogMacDeadlock;	// prevent MAC/BBP into deadlock condition
-	// ----------------------------
-	// DEBUG paramerts
-	// ----------------------------
-	//ULONG		DebugSetting[4];
-	BOOLEAN		bBanAllBaSetup;
-	BOOLEAN		bPromiscuous;
-
-	// ----------------------------
-	// rt2860c emulation-use Parameters
-	// ----------------------------
-	ULONG		rtsaccu[30];
-	ULONG		ctsaccu[30];
-	ULONG		cfendaccu[30];
-	ULONG		bacontent[16];
-	ULONG		rxint[RX_RING_SIZE+1];
-	UCHAR		rcvba[60];
-	BOOLEAN		bLinkAdapt;
-	BOOLEAN		bForcePrintTX;
-	BOOLEAN		bForcePrintRX;
-	BOOLEAN		bDisablescanning;		//defined in RT2870 USB
-	BOOLEAN		bStaFifoTest;
-	BOOLEAN		bProtectionTest;
-	BOOLEAN		bHCCATest;
-	BOOLEAN		bGenOneHCCA;
-	BOOLEAN		bBroadComHT;
-	//+++Following add from RT2870 USB.
-	ULONG		BulkOutReq;
-	ULONG		BulkOutComplete;
-	ULONG		BulkOutCompleteOther;
-	ULONG		BulkOutCompleteCancel;	// seems not use now?
-	ULONG		BulkInReq;
-	ULONG		BulkInComplete;
-	ULONG		BulkInCompleteFail;
-	//---
-
-    struct wificonf			WIFItestbed;
-
-#ifdef RALINK_ATE
-	ATE_INFO				ate;
-#ifdef RT2870
-	BOOLEAN					ContinBulkOut;		//ATE bulk out control
-	BOOLEAN					ContinBulkIn;		//ATE bulk in control
-	atomic_t				BulkOutRemained;
-	atomic_t				BulkInRemained;
-#endif // RT2870 //
-#endif // RALINK_ATE //
-
-#ifdef DOT11_N_SUPPORT
-	struct reordering_mpdu_pool mpdu_blk_pool;
-#endif // DOT11_N_SUPPORT //
-
-	ULONG					OneSecondnonBEpackets;		// record non BE packets per second
-
-#if WIRELESS_EXT >= 12
-    struct iw_statistics    iw_stats;
-#endif
-
-	struct net_device_stats	stats;
-
-#ifdef BLOCK_NET_IF
-	BLOCK_QUEUE_ENTRY		blockQueueTab[NUM_OF_TX_RING];
-#endif // BLOCK_NET_IF //
-
-
-
-#ifdef MULTIPLE_CARD_SUPPORT
-	INT32					MC_RowID;
-	UCHAR					MC_FileName[256];
-#endif // MULTIPLE_CARD_SUPPORT //
-
-	ULONG					TbttTickCount;
-#ifdef PCI_MSI_SUPPORT
-	BOOLEAN					HaveMsi;
-#endif // PCI_MSI_SUPPORT //
-
-
-	UCHAR					is_on;
-
-#define TIME_BASE			(1000000/OS_HZ)
-#define TIME_ONE_SECOND		(1000000/TIME_BASE)
-	UCHAR					flg_be_adjust;
-	ULONG					be_adjust_last_time;
-
-#ifdef NINTENDO_AP
-	NINDO_CTRL_BLOCK		nindo_ctrl_block;
-#endif // NINTENDO_AP //
-
-
-#ifdef IKANOS_VX_1X0
-	struct IKANOS_TX_INFO	IkanosTxInfo;
-	struct IKANOS_TX_INFO	IkanosRxInfo[MAX_MBSSID_NUM + MAX_WDS_ENTRY + MAX_APCLI_NUM + MAX_MESH_NUM];
-#endif // IKANOS_VX_1X0 //
-
-
-#ifdef DBG_DIAGNOSE
-	RtmpDiagStruct	DiagStruct;
-#endif // DBG_DIAGNOSE //
-
-
-	UINT8					PM_FlgSuspend;
-
-#ifdef RT30xx
-//======efuse
-	BOOLEAN		bUseEfuse;
-	BOOLEAN		bEEPROMFile;
-#endif // RT30xx //
-
-} RTMP_ADAPTER, *PRTMP_ADAPTER;
-
-//
-// Cisco IAPP format
-//
-typedef struct  _CISCO_IAPP_CONTENT_
-{
-	USHORT     Length;        //IAPP Length
-	UCHAR      MessageType;      //IAPP type
-	UCHAR      FunctionCode;     //IAPP function type
-	UCHAR      DestinaionMAC[MAC_ADDR_LEN];
-	UCHAR      SourceMAC[MAC_ADDR_LEN];
-	USHORT     Tag;           //Tag(element IE) - Adjacent AP report
-	USHORT     TagLength;     //Length of element not including 4 byte header
-	UCHAR      OUI[4];           //0x00, 0x40, 0x96, 0x00
-	UCHAR      PreviousAP[MAC_ADDR_LEN];       //MAC Address of access point
-	USHORT     Channel;
-	USHORT     SsidLen;
-	UCHAR      Ssid[MAX_LEN_OF_SSID];
-	USHORT     Seconds;          //Seconds that the client has been disassociated.
-} CISCO_IAPP_CONTENT, *PCISCO_IAPP_CONTENT;
-
-#define DELAYINTMASK		0x0003fffb
-#define INTMASK				0x0003fffb
-#define IndMask				0x0003fffc
-#define RxINT				0x00000005	// Delayed Rx or indivi rx
-#define TxDataInt			0x000000fa	// Delayed Tx or indivi tx
-#define TxMgmtInt			0x00000102	// Delayed Tx or indivi tx
-#define TxCoherent			0x00020000	// tx coherent
-#define RxCoherent			0x00010000	// rx coherent
-#define McuCommand			0x00000200	// mcu
-#define PreTBTTInt			0x00001000	// Pre-TBTT interrupt
-#define TBTTInt				0x00000800		// TBTT interrupt
-#define GPTimeOutInt			0x00008000		// GPtimeout interrupt
-#define AutoWakeupInt		0x00004000		// AutoWakeupInt interrupt
-#define FifoStaFullInt			0x00002000	//  fifo statistics full interrupt
-
-
-typedef struct _RX_BLK_
-{
-//	RXD_STRUC		RxD; // sample
-	RT28XX_RXD_STRUC	RxD;
-	PRXWI_STRUC			pRxWI;
-	PHEADER_802_11		pHeader;
-	PNDIS_PACKET		pRxPacket;
-	UCHAR				*pData;
-	USHORT				DataSize;
-	USHORT				Flags;
-	UCHAR				UserPriority;	// for calculate TKIP MIC using
-} RX_BLK;
-
-
-#define RX_BLK_SET_FLAG(_pRxBlk, _flag)		(_pRxBlk->Flags |= _flag)
-#define RX_BLK_TEST_FLAG(_pRxBlk, _flag)	(_pRxBlk->Flags & _flag)
-#define RX_BLK_CLEAR_FLAG(_pRxBlk, _flag)	(_pRxBlk->Flags &= ~(_flag))
-
-
-#define fRX_WDS			0x0001
-#define fRX_AMSDU       0x0002
-#define fRX_ARALINK     0x0004
-#define fRX_HTC         0x0008
-#define fRX_PAD         0x0010
-#define fRX_AMPDU       0x0020
-#define fRX_QOS			0x0040
-#define fRX_INFRA		0x0080
-#define fRX_EAP			0x0100
-#define fRX_MESH		0x0200
-#define fRX_APCLI		0x0400
-#define fRX_DLS			0x0800
-#define fRX_WPI			0x1000
-
-#define LENGTH_AMSDU_SUBFRAMEHEAD	14
-#define LENGTH_ARALINK_SUBFRAMEHEAD	14
-#define LENGTH_ARALINK_HEADER_FIELD	 2
-
-#define TX_UNKOWN_FRAME			0x00
-#define TX_MCAST_FRAME			0x01
-#define TX_LEGACY_FRAME			0x02
-#define TX_AMPDU_FRAME			0x04
-#define TX_AMSDU_FRAME			0x08
-#define TX_RALINK_FRAME			0x10
-#define TX_FRAG_FRAME			0x20
-
-
-//	Currently the sizeof(TX_BLK) is 148 bytes.
-typedef struct _TX_BLK_
-{
-	UCHAR				QueIdx;
-	UCHAR				TxFrameType;				// Indicate the Transmission type of the all frames in one batch
-	UCHAR				TotalFrameNum;				// Total frame number want to send-out in one batch
-	USHORT				TotalFragNum;				// Total frame fragments required in one batch
-	USHORT				TotalFrameLen;				// Total length of all frames want to send-out in one batch
-
-	QUEUE_HEADER		TxPacketList;
-	MAC_TABLE_ENTRY		*pMacEntry;					// NULL: packet with 802.11 RA field is multicast/broadcast address
-	HTTRANSMIT_SETTING	*pTransmit;
-
-	// Following structure used for the characteristics of a specific packet.
-	PNDIS_PACKET		pPacket;
-	PUCHAR				pSrcBufHeader;				// Reference to the head of sk_buff->data
-	PUCHAR				pSrcBufData;				// Reference to the sk_buff->data, will changed depends on hanlding progresss
-	UINT				SrcBufLen;					// Length of packet payload which not including Layer 2 header
-	PUCHAR				pExtraLlcSnapEncap;			// NULL means no extra LLC/SNAP is required
-	UCHAR				HeaderBuf[80];				// TempBuffer for TX_INFO + TX_WI + 802.11 Header + padding + AMSDU SubHeader + LLC/SNAP
-	UCHAR				MpduHeaderLen;				// 802.11 header length NOT including the padding
-	UCHAR				HdrPadLen;					// recording Header Padding Length;
-	UCHAR				apidx;						// The interface associated to this packet
-	UCHAR				Wcid;						// The MAC entry associated to this packet
-	UCHAR				UserPriority;				// priority class of packet
-	UCHAR				FrameGap;					// what kind of IFS this packet use
-	UCHAR				MpduReqNum;					// number of fragments of this frame
-	UCHAR				TxRate;						// TODO: Obsoleted? Should change to MCS?
-	UCHAR				CipherAlg;					// cipher alogrithm
-	PCIPHER_KEY			pKey;
-
-
-
-	USHORT				Flags;						//See following definitions for detail.
-
-	//YOU SHOULD NOT TOUCH IT! Following parameters are used for hardware-depended layer.
-	ULONG				Priv;						// Hardware specific value saved in here.
-} TX_BLK, *PTX_BLK;
-
-
-#define fTX_bRtsRequired		0x0001	// Indicate if need send RTS frame for protection. Not used in RT2860/RT2870.
-#define fTX_bAckRequired       	0x0002	// the packet need ack response
-#define fTX_bPiggyBack     		0x0004	// Legacy device use Piggback or not
-#define fTX_bHTRate         	0x0008	// allow to use HT rate
-//#define fTX_bForceLowRate       0x0010	// force to use Low Rate
-#define fTX_bForceNonQoS       	0x0010	// force to transmit frame without WMM-QoS in HT mode
-#define fTX_bAllowFrag       	0x0020	// allow to fragment the packet, A-MPDU, A-MSDU, A-Ralink is not allowed to fragment
-#define fTX_bMoreData			0x0040	// there are more data packets in PowerSave Queue
-#define fTX_bWMM				0x0080	// QOS Data
-
-#define fTX_bClearEAPFrame		0x0100
-
-
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-
-
-
-#define TX_BLK_ASSIGN_FLAG(_pTxBlk, _flag, value)	\
-		do {										\
-			if (value) 								\
-				(_pTxBlk->Flags |= _flag) 			\
-			else 									\
-				(_pTxBlk->Flags &= ~(_flag))		\
-		}while(0)
-
-#define TX_BLK_SET_FLAG(_pTxBlk, _flag)		(_pTxBlk->Flags |= _flag)
-#define TX_BLK_TEST_FLAG(_pTxBlk, _flag)	(((_pTxBlk->Flags & _flag) == _flag) ? 1 : 0)
-#define TX_BLK_CLEAR_FLAG(_pTxBlk, _flag)	(_pTxBlk->Flags &= ~(_flag))
-
-
-
-
-
-//------------------------------------------------------------------------------------------
-
-
-
-#ifdef RT_BIG_ENDIAN
-static inline VOID	WriteBackToDescriptor(
-	IN  PUCHAR			Dest,
- 	IN	PUCHAR			Src,
-    IN  BOOLEAN			DoEncrypt,
-	IN  ULONG           DescriptorType)
-{
-	UINT32 *p1, *p2;
-
-	p1 = ((UINT32 *)Dest);
-	p2 = ((UINT32 *)Src);
-
-	*p1 = *p2;
-	*(p1+2) = *(p2+2);
-	*(p1+3) = *(p2+3);
-	*(p1+1) = *(p2+1); // Word 1; this must be written back last
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Endian conversion of Tx/Rx descriptor .
-
-	Arguments:
-		pAd 	Pointer to our adapter
-		pData			Pointer to Tx/Rx descriptor
-		DescriptorType	Direction of the frame
-
-	Return Value:
-		None
-
-	Note:
-		Call this function when read or update descriptor
-	========================================================================
-*/
-static inline VOID	RTMPWIEndianChange(
-	IN	PUCHAR			pData,
-	IN	ULONG			DescriptorType)
-{
-	int size;
-	int i;
-
-	size = ((DescriptorType == TYPE_TXWI) ? TXWI_SIZE : RXWI_SIZE);
-
-	if(DescriptorType == TYPE_TXWI)
-	{
-		*((UINT32 *)(pData)) = SWAP32(*((UINT32 *)(pData)));		// Byte 0~3
-		*((UINT32 *)(pData + 4)) = SWAP32(*((UINT32 *)(pData+4)));	// Byte 4~7
-	}
-	else
-	{
-		for(i=0; i < size/4 ; i++)
-			*(((UINT32 *)pData) +i) = SWAP32(*(((UINT32 *)pData)+i));
-	}
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Endian conversion of Tx/Rx descriptor .
-
-	Arguments:
-		pAd 	Pointer to our adapter
-		pData			Pointer to Tx/Rx descriptor
-		DescriptorType	Direction of the frame
-
-	Return Value:
-		None
-
-	Note:
-		Call this function when read or update descriptor
-	========================================================================
-*/
-
-#ifdef RT2870
-static inline VOID	RTMPDescriptorEndianChange(
-	IN	PUCHAR			pData,
-	IN	ULONG			DescriptorType)
-{
-	*((UINT32 *)(pData)) = SWAP32(*((UINT32 *)(pData)));
-}
-#endif // RT2870 //
-/*
-	========================================================================
-
-	Routine Description:
-		Endian conversion of all kinds of 802.11 frames .
-
-	Arguments:
-		pAd 	Pointer to our adapter
-		pData			Pointer to the 802.11 frame structure
-		Dir 			Direction of the frame
-		FromRxDoneInt	Caller is from RxDone interrupt
-
-	Return Value:
-		None
-
-	Note:
-		Call this function when read or update buffer data
-	========================================================================
-*/
-static inline VOID	RTMPFrameEndianChange(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pData,
-	IN	ULONG			Dir,
-	IN	BOOLEAN 		FromRxDoneInt)
-{
-	PHEADER_802_11 pFrame;
-	PUCHAR	pMacHdr;
-
-	// swab 16 bit fields - Frame Control field
-	if(Dir == DIR_READ)
-	{
-		*(USHORT *)pData = SWAP16(*(USHORT *)pData);
-	}
-
-	pFrame = (PHEADER_802_11) pData;
-	pMacHdr = (PUCHAR) pFrame;
-
-	// swab 16 bit fields - Duration/ID field
-	*(USHORT *)(pMacHdr + 2) = SWAP16(*(USHORT *)(pMacHdr + 2));
-
-	// swab 16 bit fields - Sequence Control field
-	*(USHORT *)(pMacHdr + 22) = SWAP16(*(USHORT *)(pMacHdr + 22));
-
-	if(pFrame->FC.Type == BTYPE_MGMT)
-	{
-		switch(pFrame->FC.SubType)
-		{
-			case SUBTYPE_ASSOC_REQ:
-			case SUBTYPE_REASSOC_REQ:
-				// swab 16 bit fields - CapabilityInfo field
-				pMacHdr += sizeof(HEADER_802_11);
-				*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-
-				// swab 16 bit fields - Listen Interval field
-				pMacHdr += 2;
-				*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-				break;
-
-			case SUBTYPE_ASSOC_RSP:
-			case SUBTYPE_REASSOC_RSP:
-				// swab 16 bit fields - CapabilityInfo field
-				pMacHdr += sizeof(HEADER_802_11);
-				*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-
-				// swab 16 bit fields - Status Code field
-				pMacHdr += 2;
-				*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-
-				// swab 16 bit fields - AID field
-				pMacHdr += 2;
-				*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-				break;
-
-			case SUBTYPE_AUTH:
-				// If from APHandleRxDoneInterrupt routine, it is still a encrypt format.
-				// The convertion is delayed to RTMPHandleDecryptionDoneInterrupt.
-				if(!FromRxDoneInt && pFrame->FC.Wep == 1)
-					break;
-				else
-				{
-					// swab 16 bit fields - Auth Alg No. field
-					pMacHdr += sizeof(HEADER_802_11);
-					*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-
-					// swab 16 bit fields - Auth Seq No. field
-					pMacHdr += 2;
-					*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-
-					// swab 16 bit fields - Status Code field
-					pMacHdr += 2;
-					*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-				}
-				break;
-
-			case SUBTYPE_BEACON:
-			case SUBTYPE_PROBE_RSP:
-				// swab 16 bit fields - BeaconInterval field
-				pMacHdr += (sizeof(HEADER_802_11) + TIMESTAMP_LEN);
-				*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-
-				// swab 16 bit fields - CapabilityInfo field
-				pMacHdr += sizeof(USHORT);
-				*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-				break;
-
-			case SUBTYPE_DEAUTH:
-			case SUBTYPE_DISASSOC:
-				// swab 16 bit fields - Reason code field
-				pMacHdr += sizeof(HEADER_802_11);
-				*(USHORT *)pMacHdr = SWAP16(*(USHORT *)pMacHdr);
-				break;
-		}
-	}
-	else if( pFrame->FC.Type == BTYPE_DATA )
-	{
-	}
-	else if(pFrame->FC.Type == BTYPE_CNTL)
-	{
-		switch(pFrame->FC.SubType)
-		{
-			case SUBTYPE_BLOCK_ACK_REQ:
-				{
-					PFRAME_BA_REQ pBAReq = (PFRAME_BA_REQ)pFrame;
-					*(USHORT *)(&pBAReq->BARControl) = SWAP16(*(USHORT *)(&pBAReq->BARControl));
-					pBAReq->BAStartingSeq.word = SWAP16(pBAReq->BAStartingSeq.word);
-				}
-				break;
-			case SUBTYPE_BLOCK_ACK:
-				// For Block Ack packet, the HT_CONTROL field is in the same offset with Addr3
-				*(UINT32 *)(&pFrame->Addr3[0]) = SWAP32(*(UINT32 *)(&pFrame->Addr3[0]));
-				break;
-
-			case SUBTYPE_ACK:
-				//For ACK packet, the HT_CONTROL field is in the same offset with Addr2
-				*(UINT32 *)(&pFrame->Addr2[0])=	SWAP32(*(UINT32 *)(&pFrame->Addr2[0]));
-				break;
-		}
-	}
-	else
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("Invalid Frame Type!!!\n"));
-	}
-
-	// swab 16 bit fields - Frame Control
-	if(Dir == DIR_WRITE)
-	{
-		*(USHORT *)pData = SWAP16(*(USHORT *)pData);
-	}
-}
-#endif // RT_BIG_ENDIAN //
-
-
-static inline VOID ConvertMulticastIP2MAC(
-	IN PUCHAR pIpAddr,
-	IN PUCHAR *ppMacAddr,
-	IN UINT16 ProtoType)
-{
-	if (pIpAddr == NULL)
-		return;
-
-	if (ppMacAddr == NULL || *ppMacAddr == NULL)
-		return;
-
-	switch (ProtoType)
-	{
-		case ETH_P_IPV6:
-//			memset(*ppMacAddr, 0, ETH_LENGTH_OF_ADDRESS);
-			*(*ppMacAddr) = 0x33;
-			*(*ppMacAddr + 1) = 0x33;
-			*(*ppMacAddr + 2) = pIpAddr[12];
-			*(*ppMacAddr + 3) = pIpAddr[13];
-			*(*ppMacAddr + 4) = pIpAddr[14];
-			*(*ppMacAddr + 5) = pIpAddr[15];
-			break;
-
-		case ETH_P_IP:
-		default:
-//			memset(*ppMacAddr, 0, ETH_LENGTH_OF_ADDRESS);
-			*(*ppMacAddr) = 0x01;
-			*(*ppMacAddr + 1) = 0x00;
-			*(*ppMacAddr + 2) = 0x5e;
-			*(*ppMacAddr + 3) = pIpAddr[1] & 0x7f;
-			*(*ppMacAddr + 4) = pIpAddr[2];
-			*(*ppMacAddr + 5) = pIpAddr[3];
-			break;
-	}
-
-	return;
-}
-
-BOOLEAN RTMPCheckForHang(
-	IN  NDIS_HANDLE MiniportAdapterContext
-	);
-
-VOID  RTMPHalt(
-	IN  NDIS_HANDLE MiniportAdapterContext
-	);
-
-//
-//  Private routines in rtmp_init.c
-//
-NDIS_STATUS RTMPAllocAdapterBlock(
-	IN PVOID			handle,
-	OUT PRTMP_ADAPTER   *ppAdapter
-	);
-
-NDIS_STATUS RTMPAllocTxRxRingMemory(
-	IN  PRTMP_ADAPTER   pAd
-	);
-
-NDIS_STATUS RTMPFindAdapter(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  NDIS_HANDLE     WrapperConfigurationContext
-	);
-
-NDIS_STATUS	RTMPReadParametersHook(
-	IN	PRTMP_ADAPTER pAd
-	);
-
-VOID RTMPFreeAdapter(
-	IN  PRTMP_ADAPTER   pAd
-	);
-
-NDIS_STATUS NICReadRegParameters(
-	IN  PRTMP_ADAPTER       pAd,
-	IN  NDIS_HANDLE         WrapperConfigurationContext
-	);
-
-#ifdef RT30xx
-VOID NICInitRT30xxRFRegisters(
-	IN PRTMP_ADAPTER pAd);
-#endif // RT30xx //
-
-VOID NICReadEEPROMParameters(
-	IN  PRTMP_ADAPTER       pAd,
-	IN	PUCHAR				mac_addr);
-
-VOID NICInitAsicFromEEPROM(
-	IN  PRTMP_ADAPTER       pAd);
-
-VOID NICInitTxRxRingAndBacklogQueue(
-	IN  PRTMP_ADAPTER   pAd);
-
-NDIS_STATUS NICInitializeAdapter(
-	IN  PRTMP_ADAPTER   pAd,
-	IN   BOOLEAN    bHardReset);
-
-NDIS_STATUS NICInitializeAsic(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  BOOLEAN		bHardReset);
-
-VOID NICIssueReset(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID RTMPRingCleanUp(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR           RingType);
-
-VOID RxTest(
-	IN  PRTMP_ADAPTER   pAd);
-
-NDIS_STATUS DbgSendPacket(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PNDIS_PACKET    pPacket);
-
-VOID UserCfgInit(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID NICResetFromError(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID NICEraseFirmware(
-	IN PRTMP_ADAPTER pAd);
-
-NDIS_STATUS NICLoadFirmware(
-	IN  PRTMP_ADAPTER   pAd);
-
-NDIS_STATUS NICLoadRateSwitchingParams(
-	IN PRTMP_ADAPTER pAd);
-
-BOOLEAN NICCheckForHang(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID NICUpdateFifoStaCounters(
-	IN PRTMP_ADAPTER pAd);
-
-VOID NICUpdateRawCounters(
-	IN  PRTMP_ADAPTER   pAd);
-
-ULONG	RTMPNotAllZero(
-	IN	PVOID	pSrc1,
-	IN	ULONG	Length);
-
-VOID RTMPZeroMemory(
-	IN  PVOID   pSrc,
-	IN  ULONG   Length);
-
-ULONG RTMPCompareMemory(
-	IN  PVOID   pSrc1,
-	IN  PVOID   pSrc2,
-	IN  ULONG   Length);
-
-VOID RTMPMoveMemory(
-	OUT PVOID   pDest,
-	IN  PVOID   pSrc,
-	IN  ULONG   Length);
-
-VOID AtoH(
-	char	*src,
-	UCHAR	*dest,
-	int		destlen);
-
-UCHAR BtoH(
-	char ch);
-
-VOID RTMPPatchMacBbpBug(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID RTMPPatchCardBus(
-	IN	PRTMP_ADAPTER	pAdapter);
-
-VOID RTMPPatchRalinkCardBus(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	ULONG			Bus);
-
-ULONG RTMPReadCBConfig(
-	IN	ULONG	Bus,
-	IN	ULONG	Slot,
-	IN	ULONG	Func,
-	IN	ULONG	Offset);
-
-VOID RTMPWriteCBConfig(
-	IN	ULONG	Bus,
-	IN	ULONG	Slot,
-	IN	ULONG	Func,
-	IN	ULONG	Offset,
-	IN	ULONG	Value);
-
-VOID RTMPInitTimer(
-	IN  PRTMP_ADAPTER           pAd,
-	IN  PRALINK_TIMER_STRUCT    pTimer,
-	IN  PVOID                   pTimerFunc,
-	IN	PVOID					pData,
-	IN  BOOLEAN                 Repeat);
-
-VOID RTMPSetTimer(
-	IN  PRALINK_TIMER_STRUCT    pTimer,
-	IN  ULONG                   Value);
-
-
-VOID RTMPModTimer(
-	IN	PRALINK_TIMER_STRUCT	pTimer,
-	IN	ULONG					Value);
-
-VOID RTMPCancelTimer(
-	IN  PRALINK_TIMER_STRUCT    pTimer,
-	OUT BOOLEAN                 *pCancelled);
-
-VOID RTMPSetLED(
-	IN PRTMP_ADAPTER 	pAd,
-	IN UCHAR			Status);
-
-VOID RTMPSetSignalLED(
-	IN PRTMP_ADAPTER 	pAd,
-	IN NDIS_802_11_RSSI Dbm);
-
-VOID RTMPEnableRxTx(
-	IN PRTMP_ADAPTER	pAd);
-
-//
-// prototype in action.c
-//
-VOID ActionStateMachineInit(
-    IN	PRTMP_ADAPTER	pAd,
-    IN  STATE_MACHINE *S,
-    OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID MlmeADDBAAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-
-VOID MlmeDELBAAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-
-VOID MlmeDLSAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-
-VOID MlmeInvalidAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-
-VOID MlmeQOSAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-
-#ifdef DOT11_N_SUPPORT
-VOID PeerAddBAReqAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerAddBARspAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerDelBAAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerBAAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-#endif // DOT11_N_SUPPORT //
-
-VOID SendPSMPAction(
-	IN PRTMP_ADAPTER	pAd,
-	IN UCHAR			Wcid,
-	IN UCHAR			Psmp);
-
-
-#ifdef DOT11N_DRAFT3
-VOID SendBSS2040CoexistMgmtAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR	Wcid,
-	IN	UCHAR	apidx,
-	IN	UCHAR	InfoReq);
-
-VOID SendNotifyBWActionFrame(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR  Wcid,
-	IN UCHAR apidx);
-
-BOOLEAN ChannelSwitchSanityCheck(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    UCHAR  Wcid,
-	IN    UCHAR  NewChannel,
-	IN    UCHAR  Secondary);
-
-VOID ChannelSwitchAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    UCHAR  Wcid,
-	IN    UCHAR  Channel,
-	IN    UCHAR  Secondary);
-
-ULONG BuildIntolerantChannelRep(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    PUCHAR  pDest);
-
-VOID Update2040CoexistFrameAndNotify(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    UCHAR  Wcid,
-	IN	BOOLEAN	bAddIntolerantCha);
-
-VOID Send2040CoexistAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    UCHAR  Wcid,
-	IN	BOOLEAN	bAddIntolerantCha);
-#endif // DOT11N_DRAFT3 //
-
-VOID PeerRMAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerPublicAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-#ifdef CONFIG_STA_SUPPORT
-VOID StaPublicAction(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR Bss2040Coexist);
-#endif // CONFIG_STA_SUPPORT //
-
-
-VOID PeerBSSTranAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-#ifdef DOT11_N_SUPPORT
-VOID PeerHTAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-#endif // DOT11_N_SUPPORT //
-
-VOID PeerQOSAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-
-#ifdef QOS_DLS_SUPPORT
-VOID PeerDLSAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-#endif // QOS_DLS_SUPPORT //
-
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-VOID DlsParmFill(
-	IN PRTMP_ADAPTER pAd,
-	IN OUT MLME_DLS_REQ_STRUCT *pDlsReq,
-	IN PRT_802_11_DLS pDls,
-	IN USHORT reason);
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef DOT11_N_SUPPORT
-VOID RECBATimerTimeout(
-    IN PVOID SystemSpecific1,
-    IN PVOID FunctionContext,
-    IN PVOID SystemSpecific2,
-    IN PVOID SystemSpecific3);
-
-VOID ORIBATimerTimeout(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID SendRefreshBAR(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MAC_TABLE_ENTRY	*pEntry);
-#endif // DOT11_N_SUPPORT //
-
-VOID ActHeaderInit(
-    IN	PRTMP_ADAPTER	pAd,
-    IN OUT PHEADER_802_11 pHdr80211,
-    IN PUCHAR Addr1,
-    IN PUCHAR Addr2,
-    IN PUCHAR Addr3);
-
-VOID BarHeaderInit(
-	IN	PRTMP_ADAPTER	pAd,
-	IN OUT PFRAME_BAR pCntlBar,
-	IN PUCHAR pDA,
-	IN PUCHAR pSA);
-
-VOID InsertActField(
-	IN PRTMP_ADAPTER pAd,
-	OUT PUCHAR pFrameBuf,
-	OUT PULONG pFrameLen,
-	IN UINT8 Category,
-	IN UINT8 ActCode);
-
-BOOLEAN QosBADataParse(
-	IN PRTMP_ADAPTER	pAd,
-	IN BOOLEAN bAMSDU,
-	IN PUCHAR p8023Header,
-	IN UCHAR	WCID,
-	IN UCHAR	TID,
-	IN USHORT Sequence,
-	IN UCHAR DataOffset,
-	IN USHORT Datasize,
-	IN UINT   CurRxIndex);
-
-#ifdef DOT11_N_SUPPORT
-BOOLEAN CntlEnqueueForRecv(
-    IN	PRTMP_ADAPTER	pAd,
-	IN ULONG Wcid,
-    IN ULONG MsgLen,
-	IN PFRAME_BA_REQ pMsg);
-
-VOID BaAutoManSwitch(
-	IN	PRTMP_ADAPTER	pAd);
-#endif // DOT11_N_SUPPORT //
-
-VOID HTIOTCheck(
-	IN	PRTMP_ADAPTER	pAd,
-	IN    UCHAR     BatRecIdx);
-
-//
-// Private routines in rtmp_data.c
-//
-BOOLEAN RTMPHandleRxDoneInterrupt(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID RTMPHandleTxDoneInterrupt(
-	IN  PRTMP_ADAPTER   pAd);
-
-BOOLEAN RTMPHandleTxRingDmaDoneInterrupt(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  INT_SOURCE_CSR_STRUC TxRingBitmap);
-
-VOID RTMPHandleMgmtRingDmaDoneInterrupt(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID RTMPHandleTBTTInterrupt(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID RTMPHandlePreTBTTInterrupt(
-	IN  PRTMP_ADAPTER   pAd);
-
-void RTMPHandleTwakeupInterrupt(
-	IN PRTMP_ADAPTER pAd);
-
-VOID	RTMPHandleRxCoherentInterrupt(
-	IN	PRTMP_ADAPTER	pAd);
-
-BOOLEAN TxFrameIsAggregatible(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pPrevAddr1,
-	IN  PUCHAR          p8023hdr);
-
-BOOLEAN PeerIsAggreOn(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  ULONG          TxRate,
-    IN  PMAC_TABLE_ENTRY pMacEntry);
-
-NDIS_STATUS Sniff2BytesFromNdisBuffer(
-	IN  PNDIS_BUFFER    pFirstBuffer,
-	IN  UCHAR           DesiredOffset,
-	OUT PUCHAR          pByte0,
-	OUT PUCHAR          pByte1);
-
-NDIS_STATUS STASendPacket(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PNDIS_PACKET    pPacket);
-
-VOID STASendPackets(
-	IN  NDIS_HANDLE     MiniportAdapterContext,
-	IN  PPNDIS_PACKET   ppPacketArray,
-	IN  UINT            NumberOfPackets);
-
-VOID RTMPDeQueuePacket(
-	IN  PRTMP_ADAPTER   pAd,
-   	IN	BOOLEAN			bIntContext,
-	IN  UCHAR			QueIdx,
-	IN	UCHAR			Max_Tx_Packets);
-
-NDIS_STATUS	RTMPHardTransmit(
-	IN PRTMP_ADAPTER	pAd,
-	IN PNDIS_PACKET		pPacket,
-	IN  UCHAR			QueIdx,
-	OUT	PULONG			pFreeTXDLeft);
-
-NDIS_STATUS	STAHardTransmit(
-	IN PRTMP_ADAPTER	pAd,
-	IN TX_BLK			*pTxBlk,
-	IN  UCHAR			QueIdx);
-
-VOID STARxEAPOLFrameIndicate(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MAC_TABLE_ENTRY	*pEntry,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID);
-
-NDIS_STATUS RTMPFreeTXDRequest(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR           RingType,
-	IN  UCHAR           NumberRequired,
-	IN 	PUCHAR          FreeNumberIs);
-
-NDIS_STATUS MlmeHardTransmit(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR	QueIdx,
-	IN  PNDIS_PACKET    pPacket);
-
-NDIS_STATUS MlmeHardTransmitMgmtRing(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR	QueIdx,
-	IN  PNDIS_PACKET    pPacket);
-
-NDIS_STATUS MlmeHardTransmitTxRing(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR	QueIdx,
-	IN  PNDIS_PACKET    pPacket);
-
-USHORT  RTMPCalcDuration(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR           Rate,
-	IN  ULONG           Size);
-
-VOID RTMPWriteTxWI(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PTXWI_STRUC		pTxWI,
-	IN  BOOLEAN    		FRAG,
-	IN  BOOLEAN    		CFACK,
-	IN  BOOLEAN    		InsTimestamp,
-	IN	BOOLEAN			AMPDU,
-	IN	BOOLEAN			Ack,
-	IN	BOOLEAN			NSeq,		// HW new a sequence.
-	IN	UCHAR			BASize,
-	IN	UCHAR			WCID,
-	IN	ULONG			Length,
-	IN  UCHAR      		PID,
-	IN	UCHAR			TID,
-	IN	UCHAR			TxRate,
-	IN	UCHAR			Txopmode,
-	IN	BOOLEAN			CfAck,
-	IN	HTTRANSMIT_SETTING	*pTransmit);
-
-
-VOID RTMPWriteTxWI_Data(
-	IN	PRTMP_ADAPTER		pAd,
-	IN	OUT PTXWI_STRUC		pTxWI,
-	IN	TX_BLK				*pTxBlk);
-
-
-VOID RTMPWriteTxWI_Cache(
-	IN	PRTMP_ADAPTER		pAd,
-	IN	OUT PTXWI_STRUC		pTxWI,
-	IN	TX_BLK				*pTxBlk);
-
-VOID RTMPWriteTxDescriptor(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PTXD_STRUC		pTxD,
-	IN	BOOLEAN			bWIV,
-	IN	UCHAR			QSEL);
-
-VOID RTMPSuspendMsduTransmission(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID RTMPResumeMsduTransmission(
-	IN  PRTMP_ADAPTER   pAd);
-
-NDIS_STATUS MiniportMMRequest(
-	IN  PRTMP_ADAPTER   pAd,
-	IN	UCHAR			QueIdx,
-	IN	PUCHAR			pData,
-	IN  UINT            Length);
-
-NDIS_STATUS MiniportDataMMRequest(
-	 IN  PRTMP_ADAPTER   pAd,
-	 IN  UCHAR           QueIdx,
-	 IN  PUCHAR          pData,
-	 IN  UINT            Length);
-
-VOID RTMPSendNullFrame(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR           TxRate,
-	IN	BOOLEAN			bQosNull);
-
-VOID RTMPSendDisassociationFrame(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID RTMPSendRTSFrame(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pDA,
-	IN	unsigned int	NextMpduSize,
-	IN  UCHAR           TxRate,
-	IN  UCHAR           RTSRate,
-	IN  USHORT          AckDuration,
-	IN  UCHAR           QueIdx,
-	IN  UCHAR			FrameGap);
-
-
-NDIS_STATUS RTMPApplyPacketFilter(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PRT28XX_RXD_STRUC      pRxD,
-	IN  PHEADER_802_11  pHeader);
-
-PQUEUE_HEADER   RTMPCheckTxSwQueue(
-	IN  PRTMP_ADAPTER   pAd,
-	OUT UCHAR           *QueIdx);
-
-#ifdef CONFIG_STA_SUPPORT
-VOID RTMPReportMicError(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PCIPHER_KEY     pWpaKey);
-
-VOID	WpaMicFailureReportFrame(
-	IN  PRTMP_ADAPTER    pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID    WpaDisassocApAndBlockAssoc(
-    IN  PVOID SystemSpecific1,
-    IN  PVOID FunctionContext,
-    IN  PVOID SystemSpecific2,
-    IN  PVOID SystemSpecific3);
-#endif // CONFIG_STA_SUPPORT //
-
-NDIS_STATUS RTMPCloneNdisPacket(
-	IN  PRTMP_ADAPTER   pAd,
-	IN	BOOLEAN    pInsAMSDUHdr,
-	IN  PNDIS_PACKET    pInPacket,
-	OUT PNDIS_PACKET   *ppOutPacket);
-
-NDIS_STATUS RTMPAllocateNdisPacket(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PNDIS_PACKET    *pPacket,
-	IN  PUCHAR          pHeader,
-	IN  UINT            HeaderLen,
-	IN  PUCHAR          pData,
-	IN  UINT            DataLen);
-
-VOID RTMPFreeNdisPacket(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PNDIS_PACKET    pPacket);
-
-BOOLEAN RTMPFreeTXDUponTxDmaDone(
-	IN PRTMP_ADAPTER    pAd,
-	IN UCHAR            QueIdx);
-
-BOOLEAN RTMPCheckDHCPFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket);
-
-
-BOOLEAN RTMPCheckEtherType(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket);
-
-
-VOID RTMPCckBbpTuning(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UINT			TxRate);
-
-//
-// Private routines in rtmp_wep.c
-//
-VOID RTMPInitWepEngine(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pKey,
-	IN  UCHAR           KeyId,
-	IN  UCHAR           KeyLen,
-	IN  PUCHAR          pDest);
-
-VOID RTMPEncryptData(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pSrc,
-	IN  PUCHAR          pDest,
-	IN  UINT            Len);
-
-BOOLEAN	RTMPDecryptData(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	PUCHAR			pSrc,
-	IN	UINT			Len,
-	IN	UINT			idx);
-
-BOOLEAN	RTMPSoftDecryptWEP(
-	IN PRTMP_ADAPTER 	pAd,
-	IN PUCHAR			pData,
-	IN ULONG			DataByteCnt,
-	IN PCIPHER_KEY		pGroupKey);
-
-VOID RTMPSetICV(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pDest);
-
-VOID ARCFOUR_INIT(
-	IN  PARCFOURCONTEXT Ctx,
-	IN  PUCHAR          pKey,
-	IN  UINT            KeyLen);
-
-UCHAR   ARCFOUR_BYTE(
-	IN  PARCFOURCONTEXT     Ctx);
-
-VOID ARCFOUR_DECRYPT(
-	IN  PARCFOURCONTEXT Ctx,
-	IN  PUCHAR          pDest,
-	IN  PUCHAR          pSrc,
-	IN  UINT            Len);
-
-VOID ARCFOUR_ENCRYPT(
-	IN  PARCFOURCONTEXT Ctx,
-	IN  PUCHAR          pDest,
-	IN  PUCHAR          pSrc,
-	IN  UINT            Len);
-
-VOID WPAARCFOUR_ENCRYPT(
-	IN  PARCFOURCONTEXT Ctx,
-	IN  PUCHAR          pDest,
-	IN  PUCHAR          pSrc,
-	IN  UINT            Len);
-
-UINT RTMP_CALC_FCS32(
-	IN  UINT   Fcs,
-	IN  PUCHAR  Cp,
-	IN  INT     Len);
-
-//
-// MLME routines
-//
-
-// Asic/RF/BBP related functions
-
-VOID AsicAdjustTxPower(
-	IN PRTMP_ADAPTER pAd);
-
-VOID 	AsicUpdateProtect(
-	IN		PRTMP_ADAPTER	pAd,
-	IN 		USHORT			OperaionMode,
-	IN 		UCHAR			SetMask,
-	IN		BOOLEAN			bDisableBGProtect,
-	IN		BOOLEAN			bNonGFExist);
-
-VOID AsicSwitchChannel(
-	IN  PRTMP_ADAPTER   pAd,
-	IN	UCHAR			Channel,
-	IN	BOOLEAN			bScan);
-
-VOID AsicLockChannel(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR Channel) ;
-
-VOID AsicAntennaSelect(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR           Channel);
-
-VOID AsicAntennaSetting(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	ABGBAND_STATE	BandState);
-
-VOID AsicRfTuningExec(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-#ifdef CONFIG_STA_SUPPORT
-VOID AsicSleepThenAutoWakeup(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  USHORT TbttNumToNextWakeUp);
-
-VOID AsicForceSleep(
-	IN PRTMP_ADAPTER pAd);
-
-VOID AsicForceWakeup(
-	IN PRTMP_ADAPTER pAd,
-	IN BOOLEAN    bFromTx);
-#endif // CONFIG_STA_SUPPORT //
-
-VOID AsicSetBssid(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR pBssid);
-
-VOID AsicSetMcastWC(
-	IN PRTMP_ADAPTER pAd);
-
-VOID AsicDelWcidTab(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR	Wcid);
-
-VOID AsicEnableRDG(
-	IN PRTMP_ADAPTER pAd);
-
-VOID AsicDisableRDG(
-	IN PRTMP_ADAPTER pAd);
-
-VOID AsicDisableSync(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID AsicEnableBssSync(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID AsicEnableIbssSync(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID AsicSetEdcaParm(
-	IN PRTMP_ADAPTER pAd,
-	IN PEDCA_PARM    pEdcaParm);
-
-VOID AsicSetSlotTime(
-	IN PRTMP_ADAPTER pAd,
-	IN BOOLEAN bUseShortSlotTime);
-
-VOID AsicAddSharedKeyEntry(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR         BssIndex,
-	IN UCHAR         KeyIdx,
-	IN UCHAR         CipherAlg,
-	IN PUCHAR        pKey,
-	IN PUCHAR        pTxMic,
-	IN PUCHAR        pRxMic);
-
-VOID AsicRemoveSharedKeyEntry(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR         BssIndex,
-	IN UCHAR         KeyIdx);
-
-VOID AsicUpdateWCIDAttribute(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT		WCID,
-	IN UCHAR		BssIndex,
-	IN UCHAR        CipherAlg,
-	IN BOOLEAN		bUsePairewiseKeyTable);
-
-VOID AsicUpdateWCIDIVEIV(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT		WCID,
-	IN ULONG        uIV,
-	IN ULONG        uEIV);
-
-VOID AsicUpdateRxWCIDTable(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT		WCID,
-	IN PUCHAR        pAddr);
-
-VOID AsicAddKeyEntry(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT		WCID,
-	IN UCHAR		BssIndex,
-	IN UCHAR		KeyIdx,
-	IN PCIPHER_KEY	pCipherKey,
-	IN BOOLEAN		bUsePairewiseKeyTable,
-	IN BOOLEAN		bTxKey);
-
-VOID AsicAddPairwiseKeyEntry(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR        pAddr,
-	IN UCHAR		WCID,
-	IN CIPHER_KEY		 *pCipherKey);
-
-VOID AsicRemovePairwiseKeyEntry(
-	IN PRTMP_ADAPTER  pAd,
-	IN UCHAR		 BssIdx,
-	IN UCHAR		 Wcid);
-
-BOOLEAN AsicSendCommandToMcu(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR         Command,
-	IN UCHAR         Token,
-	IN UCHAR         Arg0,
-	IN UCHAR         Arg1);
-
-
-VOID MacAddrRandomBssid(
-	IN  PRTMP_ADAPTER   pAd,
-	OUT PUCHAR pAddr);
-
-VOID MgtMacHeaderInit(
-	IN  PRTMP_ADAPTER     pAd,
-	IN OUT PHEADER_802_11 pHdr80211,
-	IN UCHAR SubType,
-	IN UCHAR ToDs,
-	IN PUCHAR pDA,
-	IN PUCHAR pBssid);
-
-VOID MlmeRadioOff(
-	IN PRTMP_ADAPTER pAd);
-
-VOID MlmeRadioOn(
-	IN PRTMP_ADAPTER pAd);
-
-
-VOID BssTableInit(
-	IN BSS_TABLE *Tab);
-
-#ifdef DOT11_N_SUPPORT
-VOID BATableInit(
-	IN PRTMP_ADAPTER pAd,
-    IN BA_TABLE *Tab);
-#endif // DOT11_N_SUPPORT //
-
-ULONG BssTableSearch(
-	IN BSS_TABLE *Tab,
-	IN PUCHAR pBssid,
-	IN UCHAR Channel);
-
-ULONG BssSsidTableSearch(
-	IN BSS_TABLE *Tab,
-	IN PUCHAR    pBssid,
-	IN PUCHAR    pSsid,
-	IN UCHAR     SsidLen,
-	IN UCHAR     Channel);
-
-ULONG BssTableSearchWithSSID(
-	IN BSS_TABLE *Tab,
-	IN PUCHAR    Bssid,
-	IN PUCHAR    pSsid,
-	IN UCHAR     SsidLen,
-	IN UCHAR     Channel);
-
-VOID BssTableDeleteEntry(
-	IN OUT  PBSS_TABLE pTab,
-	IN      PUCHAR pBssid,
-	IN      UCHAR Channel);
-
-#ifdef DOT11_N_SUPPORT
-VOID BATableDeleteORIEntry(
-	IN OUT	PRTMP_ADAPTER pAd,
-	IN		BA_ORI_ENTRY	*pBAORIEntry);
-
-VOID BATableDeleteRECEntry(
-	IN OUT	PRTMP_ADAPTER pAd,
-	IN		BA_REC_ENTRY	*pBARECEntry);
-
-VOID BATableTearORIEntry(
-	IN OUT	PRTMP_ADAPTER pAd,
-	IN		UCHAR TID,
-	IN		UCHAR Wcid,
-	IN		BOOLEAN bForceDelete,
-	IN		BOOLEAN ALL);
-
-VOID BATableTearRECEntry(
-	IN OUT	PRTMP_ADAPTER pAd,
-	IN		UCHAR TID,
-	IN		UCHAR WCID,
-	IN		BOOLEAN ALL);
-#endif // DOT11_N_SUPPORT //
-
-VOID  BssEntrySet(
-	IN  PRTMP_ADAPTER   pAd,
-	OUT PBSS_ENTRY pBss,
-	IN PUCHAR pBssid,
-	IN CHAR Ssid[],
-	IN UCHAR SsidLen,
-	IN UCHAR BssType,
-	IN USHORT BeaconPeriod,
-	IN PCF_PARM CfParm,
-	IN USHORT AtimWin,
-	IN USHORT CapabilityInfo,
-	IN UCHAR SupRate[],
-	IN UCHAR SupRateLen,
-	IN UCHAR ExtRate[],
-	IN UCHAR ExtRateLen,
-	IN HT_CAPABILITY_IE *pHtCapability,
-	IN ADD_HT_INFO_IE *pAddHtInfo,	// AP might use this additional ht info IE
-	IN UCHAR			HtCapabilityLen,
-	IN UCHAR			AddHtInfoLen,
-	IN UCHAR			NewExtChanOffset,
-	IN UCHAR Channel,
-	IN CHAR Rssi,
-	IN LARGE_INTEGER TimeStamp,
-	IN UCHAR CkipFlag,
-	IN PEDCA_PARM pEdcaParm,
-	IN PQOS_CAPABILITY_PARM pQosCapability,
-	IN PQBSS_LOAD_PARM pQbssLoad,
-	IN USHORT LengthVIE,
-	IN PNDIS_802_11_VARIABLE_IEs pVIE);
-
-ULONG  BssTableSetEntry(
-	IN  PRTMP_ADAPTER   pAd,
-	OUT PBSS_TABLE pTab,
-	IN PUCHAR pBssid,
-	IN CHAR Ssid[],
-	IN UCHAR SsidLen,
-	IN UCHAR BssType,
-	IN USHORT BeaconPeriod,
-	IN CF_PARM *CfParm,
-	IN USHORT AtimWin,
-	IN USHORT CapabilityInfo,
-	IN UCHAR SupRate[],
-	IN UCHAR SupRateLen,
-	IN UCHAR ExtRate[],
-	IN UCHAR ExtRateLen,
-	IN HT_CAPABILITY_IE *pHtCapability,
-	IN ADD_HT_INFO_IE *pAddHtInfo,	// AP might use this additional ht info IE
-	IN UCHAR			HtCapabilityLen,
-	IN UCHAR			AddHtInfoLen,
-	IN UCHAR			NewExtChanOffset,
-	IN UCHAR Channel,
-	IN CHAR Rssi,
-	IN LARGE_INTEGER TimeStamp,
-	IN UCHAR CkipFlag,
-	IN PEDCA_PARM pEdcaParm,
-	IN PQOS_CAPABILITY_PARM pQosCapability,
-	IN PQBSS_LOAD_PARM pQbssLoad,
-	IN USHORT LengthVIE,
-	IN PNDIS_802_11_VARIABLE_IEs pVIE);
-
-#ifdef DOT11_N_SUPPORT
-VOID BATableInsertEntry(
-    IN	PRTMP_ADAPTER	pAd,
-	IN USHORT Aid,
-    IN USHORT		TimeOutValue,
-	IN USHORT		StartingSeq,
-    IN UCHAR TID,
-	IN UCHAR BAWinSize,
-	IN UCHAR OriginatorStatus,
-    IN BOOLEAN IsRecipient);
-
-#ifdef DOT11N_DRAFT3
-VOID Bss2040CoexistTimeOut(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-
-VOID  TriEventInit(
-	IN	PRTMP_ADAPTER	pAd);
-
-ULONG TriEventTableSetEntry(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT TRIGGER_EVENT_TAB *Tab,
-	IN PUCHAR pBssid,
-	IN HT_CAPABILITY_IE *pHtCapability,
-	IN UCHAR			HtCapabilityLen,
-	IN UCHAR			RegClass,
-	IN UCHAR ChannelNo);
-
-VOID TriEventCounterMaintenance(
-	IN	PRTMP_ADAPTER	pAd);
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
-
-VOID BssTableSsidSort(
-	IN  PRTMP_ADAPTER   pAd,
-	OUT BSS_TABLE *OutTab,
-	IN  CHAR Ssid[],
-	IN  UCHAR SsidLen);
-
-VOID  BssTableSortByRssi(
-	IN OUT BSS_TABLE *OutTab);
-
-VOID BssCipherParse(
-	IN OUT  PBSS_ENTRY  pBss);
-
-NDIS_STATUS  MlmeQueueInit(
-	IN MLME_QUEUE *Queue);
-
-VOID  MlmeQueueDestroy(
-	IN MLME_QUEUE *Queue);
-
-BOOLEAN MlmeEnqueue(
-	IN PRTMP_ADAPTER pAd,
-	IN ULONG Machine,
-	IN ULONG MsgType,
-	IN ULONG MsgLen,
-	IN VOID *Msg);
-
-BOOLEAN MlmeEnqueueForRecv(
-	IN  PRTMP_ADAPTER   pAd,
-	IN ULONG Wcid,
-	IN ULONG TimeStampHigh,
-	IN ULONG TimeStampLow,
-	IN UCHAR Rssi0,
-	IN UCHAR Rssi1,
-	IN UCHAR Rssi2,
-	IN ULONG MsgLen,
-	IN PVOID Msg,
-	IN UCHAR Signal);
-
-
-BOOLEAN MlmeDequeue(
-	IN MLME_QUEUE *Queue,
-	OUT MLME_QUEUE_ELEM **Elem);
-
-VOID    MlmeRestartStateMachine(
-	IN  PRTMP_ADAPTER   pAd);
-
-BOOLEAN  MlmeQueueEmpty(
-	IN MLME_QUEUE *Queue);
-
-BOOLEAN  MlmeQueueFull(
-	IN MLME_QUEUE *Queue);
-
-BOOLEAN  MsgTypeSubst(
-	IN PRTMP_ADAPTER pAd,
-	IN PFRAME_802_11 pFrame,
-	OUT INT *Machine,
-	OUT INT *MsgType);
-
-VOID StateMachineInit(
-	IN STATE_MACHINE *Sm,
-	IN STATE_MACHINE_FUNC Trans[],
-	IN ULONG StNr,
-	IN ULONG MsgNr,
-	IN STATE_MACHINE_FUNC DefFunc,
-	IN ULONG InitState,
-	IN ULONG Base);
-
-VOID StateMachineSetAction(
-	IN STATE_MACHINE *S,
-	IN ULONG St,
-	ULONG Msg,
-	IN STATE_MACHINE_FUNC F);
-
-VOID StateMachinePerformAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN STATE_MACHINE *S,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID Drop(
-	IN  PRTMP_ADAPTER   pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID AssocStateMachineInit(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  STATE_MACHINE *Sm,
-	OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID ReassocTimeout(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-VOID AssocTimeout(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-VOID DisassocTimeout(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-//----------------------------------------------
-VOID MlmeDisassocReqAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID MlmeAssocReqAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID MlmeReassocReqAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID MlmeDisassocReqAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID PeerAssocRspAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID PeerReassocRspAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID PeerDisassocAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID DisassocTimeoutAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID AssocTimeoutAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID  ReassocTimeoutAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID  Cls3errAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR pAddr);
-
-VOID SwitchBetweenWepAndCkip(
-	IN PRTMP_ADAPTER pAd);
-
-VOID  InvalidStateWhenAssoc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID  InvalidStateWhenReassoc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID InvalidStateWhenDisassociate(
-	IN  PRTMP_ADAPTER pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-#ifdef RT2870
-VOID MlmeCntlConfirm(
-	IN PRTMP_ADAPTER pAd,
-	IN ULONG MsgType,
-	IN USHORT Msg);
-#endif // RT2870 //
-
-VOID  ComposePsPoll(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID  ComposeNullFrame(
-	IN  PRTMP_ADAPTER pAd);
-
-VOID  AssocPostProc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR pAddr2,
-	IN  USHORT CapabilityInfo,
-	IN  USHORT Aid,
-	IN  UCHAR SupRate[],
-	IN  UCHAR SupRateLen,
-	IN  UCHAR ExtRate[],
-	IN  UCHAR ExtRateLen,
-	IN PEDCA_PARM pEdcaParm,
-	IN HT_CAPABILITY_IE		*pHtCapability,
-	IN  UCHAR HtCapabilityLen,
-	IN ADD_HT_INFO_IE		*pAddHtInfo);
-
-VOID AuthStateMachineInit(
-	IN  PRTMP_ADAPTER   pAd,
-	IN PSTATE_MACHINE sm,
-	OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID AuthTimeout(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-VOID MlmeAuthReqAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID PeerAuthRspAtSeq2Action(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID PeerAuthRspAtSeq4Action(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID AuthTimeoutAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID Cls2errAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR pAddr);
-
-VOID MlmeDeauthReqAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID InvalidStateWhenAuth(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-//=============================================
-
-VOID AuthRspStateMachineInit(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PSTATE_MACHINE Sm,
-	IN  STATE_MACHINE_FUNC Trans[]);
-
-VOID PeerDeauthAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerAuthSimpleRspGenAndSend(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PHEADER_802_11  pHdr80211,
-	IN  USHORT Alg,
-	IN  USHORT Seq,
-	IN  USHORT Reason,
-	IN  USHORT Status);
-
-//
-// Private routines in dls.c
-//
-
-#ifdef CONFIG_STA_SUPPORT
-#ifdef QOS_DLS_SUPPORT
-void DlsStateMachineInit(
-    IN PRTMP_ADAPTER pAd,
-    IN STATE_MACHINE *Sm,
-    OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID MlmeDlsReqAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerDlsReqAction(
-    IN PRTMP_ADAPTER	pAd,
-    IN MLME_QUEUE_ELEM	*Elem);
-
-VOID PeerDlsRspAction(
-    IN PRTMP_ADAPTER	pAd,
-    IN MLME_QUEUE_ELEM	*Elem);
-
-VOID MlmeDlsTearDownAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerDlsTearDownAction(
-    IN PRTMP_ADAPTER	pAd,
-    IN MLME_QUEUE_ELEM	*Elem);
-
-VOID RTMPCheckDLSTimeOut(
-	IN PRTMP_ADAPTER	pAd);
-
-BOOLEAN RTMPRcvFrameDLSCheck(
-	IN PRTMP_ADAPTER	pAd,
-	IN PHEADER_802_11	pHeader,
-	IN ULONG			Len,
-	IN PRT28XX_RXD_STRUC	pRxD);
-
-INT	RTMPCheckDLSFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN  PUCHAR          pDA);
-
-VOID RTMPSendDLSTearDownFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN  PUCHAR          pDA);
-
-NDIS_STATUS RTMPSendSTAKeyRequest(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pDA);
-
-NDIS_STATUS RTMPSendSTAKeyHandShake(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pDA);
-
-VOID DlsTimeoutAction(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-BOOLEAN MlmeDlsReqSanity(
-	IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PRT_802_11_DLS *pDLS,
-    OUT PUSHORT pReason);
-
-INT Set_DlsEntryInfo_Display_Proc(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR arg);
-
-MAC_TABLE_ENTRY *MacTableInsertDlsEntry(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR	pAddr,
-	IN  UINT	DlsEntryIdx);
-
-BOOLEAN MacTableDeleteDlsEntry(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT wcid,
-	IN PUCHAR pAddr);
-
-MAC_TABLE_ENTRY *DlsEntryTableLookup(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR	pAddr,
-	IN BOOLEAN	bResetIdelCount);
-
-MAC_TABLE_ENTRY *DlsEntryTableLookupByWcid(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR	wcid,
-	IN PUCHAR	pAddr,
-	IN BOOLEAN	bResetIdelCount);
-
-INT	Set_DlsAddEntry_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_DlsTearDownEntry_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-#endif // QOS_DLS_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef QOS_DLS_SUPPORT
-BOOLEAN PeerDlsReqSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pDA,
-    OUT PUCHAR pSA,
-    OUT USHORT *pCapabilityInfo,
-    OUT USHORT *pDlsTimeout,
-    OUT UCHAR *pRatesLen,
-    OUT UCHAR Rates[],
-    OUT UCHAR *pHtCapabilityLen,
-    OUT HT_CAPABILITY_IE *pHtCapability);
-
-BOOLEAN PeerDlsRspSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pDA,
-    OUT PUCHAR pSA,
-    OUT USHORT *pCapabilityInfo,
-    OUT USHORT *pStatus,
-    OUT UCHAR *pRatesLen,
-    OUT UCHAR Rates[],
-    OUT UCHAR *pHtCapabilityLen,
-    OUT HT_CAPABILITY_IE *pHtCapability);
-
-BOOLEAN PeerDlsTearDownSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pDA,
-    OUT PUCHAR pSA,
-    OUT USHORT *pReason);
-#endif // QOS_DLS_SUPPORT //
-
-//========================================
-
-VOID SyncStateMachineInit(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  STATE_MACHINE *Sm,
-	OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID BeaconTimeout(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-VOID ScanTimeout(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-VOID MlmeScanReqAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID InvalidStateWhenScan(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID InvalidStateWhenJoin(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID InvalidStateWhenStart(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID PeerBeacon(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID EnqueueProbeRequest(
-	IN PRTMP_ADAPTER pAd);
-
-BOOLEAN ScanRunning(
-		IN PRTMP_ADAPTER pAd);
-//=========================================
-
-VOID MlmeCntlInit(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  STATE_MACHINE *S,
-	OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID MlmeCntlMachinePerformAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  STATE_MACHINE *S,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID CntlIdleProc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID CntlOidScanProc(
-	IN  PRTMP_ADAPTER pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID CntlOidSsidProc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM * Elem);
-
-VOID CntlOidRTBssidProc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM * Elem);
-
-VOID CntlMlmeRoamingProc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM * Elem);
-
-VOID CntlWaitDisassocProc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID CntlWaitJoinProc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID CntlWaitReassocProc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID CntlWaitStartProc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID CntlWaitAuthProc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID CntlWaitAuthProc2(
-	IN  PRTMP_ADAPTER pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID CntlWaitAssocProc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-#ifdef QOS_DLS_SUPPORT
-VOID CntlOidDLSSetupProc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-#endif // QOS_DLS_SUPPORT //
-
-VOID LinkUp(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR BssType);
-
-VOID LinkDown(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  BOOLEAN         IsReqFromAP);
-
-VOID IterateOnBssTab(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID IterateOnBssTab2(
-	IN  PRTMP_ADAPTER   pAd);;
-
-VOID JoinParmFill(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  OUT MLME_JOIN_REQ_STRUCT *JoinReq,
-	IN  ULONG BssIdx);
-
-VOID AssocParmFill(
-	IN  PRTMP_ADAPTER   pAd,
-	IN OUT MLME_ASSOC_REQ_STRUCT *AssocReq,
-	IN  PUCHAR pAddr,
-	IN  USHORT CapabilityInfo,
-	IN  ULONG Timeout,
-	IN  USHORT ListenIntv);
-
-VOID ScanParmFill(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  OUT MLME_SCAN_REQ_STRUCT *ScanReq,
-	IN  CHAR Ssid[],
-	IN  UCHAR SsidLen,
-	IN  UCHAR BssType,
-	IN  UCHAR ScanType);
-
-VOID DisassocParmFill(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  OUT MLME_DISASSOC_REQ_STRUCT *DisassocReq,
-	IN  PUCHAR pAddr,
-	IN  USHORT Reason);
-
-VOID StartParmFill(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  OUT MLME_START_REQ_STRUCT *StartReq,
-	IN  CHAR Ssid[],
-	IN  UCHAR SsidLen);
-
-VOID AuthParmFill(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  OUT MLME_AUTH_REQ_STRUCT *AuthReq,
-	IN  PUCHAR pAddr,
-	IN  USHORT Alg);
-
-VOID EnqueuePsPoll(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID EnqueueBeaconFrame(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID MlmeJoinReqAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID MlmeScanReqAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID MlmeStartReqAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID ScanTimeoutAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID BeaconTimeoutAtJoinAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID PeerBeaconAtScanAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID PeerBeaconAtJoinAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID PeerBeacon(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID PeerProbeReqAction(
-	IN  PRTMP_ADAPTER pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID ScanNextChannel(
-	IN  PRTMP_ADAPTER   pAd);
-
-ULONG MakeIbssBeacon(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID CCXAdjacentAPReport(
-	IN  PRTMP_ADAPTER   pAd);
-
-BOOLEAN MlmeScanReqSanity(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  VOID *Msg,
-	IN  ULONG MsgLen,
-	OUT UCHAR *BssType,
-	OUT CHAR ssid[],
-	OUT UCHAR *SsidLen,
-	OUT UCHAR *ScanType);
-
-BOOLEAN PeerBeaconAndProbeRspSanity(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  VOID *Msg,
-	IN  ULONG MsgLen,
-	IN  UCHAR MsgChannel,
-	OUT PUCHAR pAddr2,
-	OUT PUCHAR pBssid,
-	OUT CHAR Ssid[],
-	OUT UCHAR *pSsidLen,
-	OUT UCHAR *pBssType,
-	OUT USHORT *pBeaconPeriod,
-	OUT UCHAR *pChannel,
-	OUT UCHAR *pNewChannel,
-	OUT LARGE_INTEGER *pTimestamp,
-	OUT CF_PARM *pCfParm,
-	OUT USHORT *pAtimWin,
-	OUT USHORT *pCapabilityInfo,
-	OUT UCHAR *pErp,
-	OUT UCHAR *pDtimCount,
-	OUT UCHAR *pDtimPeriod,
-	OUT UCHAR *pBcastFlag,
-	OUT UCHAR *pMessageToMe,
-	OUT UCHAR SupRate[],
-	OUT UCHAR *pSupRateLen,
-	OUT UCHAR ExtRate[],
-	OUT UCHAR *pExtRateLen,
-	OUT	UCHAR *pCkipFlag,
-	OUT	UCHAR *pAironetCellPowerLimit,
-	OUT PEDCA_PARM       pEdcaParm,
-	OUT PQBSS_LOAD_PARM  pQbssLoad,
-	OUT PQOS_CAPABILITY_PARM pQosCapability,
-	OUT ULONG *pRalinkIe,
-	OUT UCHAR		 *pHtCapabilityLen,
-#ifdef CONFIG_STA_SUPPORT
-	OUT UCHAR		 *pPreNHtCapabilityLen,
-#endif // CONFIG_STA_SUPPORT //
-	OUT HT_CAPABILITY_IE *pHtCapability,
-	OUT UCHAR		 *AddHtInfoLen,
-	OUT ADD_HT_INFO_IE *AddHtInfo,
-	OUT UCHAR *NewExtChannel,
-	OUT USHORT *LengthVIE,
-	OUT PNDIS_802_11_VARIABLE_IEs pVIE);
-
-BOOLEAN PeerAddBAReqActionSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *pMsg,
-    IN ULONG MsgLen,
-	OUT PUCHAR pAddr2);
-
-BOOLEAN PeerAddBARspActionSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *pMsg,
-    IN ULONG MsgLen);
-
-BOOLEAN PeerDelBAActionSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN UCHAR Wcid,
-    IN VOID *pMsg,
-    IN ULONG MsgLen);
-
-BOOLEAN MlmeAssocReqSanity(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  VOID *Msg,
-	IN  ULONG MsgLen,
-	OUT PUCHAR pApAddr,
-	OUT USHORT *CapabilityInfo,
-	OUT ULONG *Timeout,
-	OUT USHORT *ListenIntv);
-
-BOOLEAN MlmeAuthReqSanity(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  VOID *Msg,
-	IN  ULONG MsgLen,
-	OUT PUCHAR pAddr,
-	OUT ULONG *Timeout,
-	OUT USHORT *Alg);
-
-BOOLEAN MlmeStartReqSanity(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  VOID *Msg,
-	IN  ULONG MsgLen,
-	OUT CHAR Ssid[],
-	OUT UCHAR *Ssidlen);
-
-BOOLEAN PeerAuthSanity(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  VOID *Msg,
-	IN  ULONG MsgLen,
-	OUT PUCHAR pAddr,
-	OUT USHORT *Alg,
-	OUT USHORT *Seq,
-	OUT USHORT *Status,
-	OUT CHAR ChlgText[]);
-
-BOOLEAN PeerAssocRspSanity(
-	IN  PRTMP_ADAPTER   pAd,
-    IN VOID *pMsg,
-	IN  ULONG MsgLen,
-	OUT PUCHAR pAddr2,
-	OUT USHORT *pCapabilityInfo,
-	OUT USHORT *pStatus,
-	OUT USHORT *pAid,
-	OUT UCHAR SupRate[],
-	OUT UCHAR *pSupRateLen,
-	OUT UCHAR ExtRate[],
-	OUT UCHAR *pExtRateLen,
-    OUT HT_CAPABILITY_IE		*pHtCapability,
-    OUT ADD_HT_INFO_IE		*pAddHtInfo,	// AP might use this additional ht info IE
-    OUT UCHAR			*pHtCapabilityLen,
-    OUT UCHAR			*pAddHtInfoLen,
-    OUT UCHAR			*pNewExtChannelOffset,
-	OUT PEDCA_PARM pEdcaParm,
-	OUT UCHAR *pCkipFlag);
-
-BOOLEAN PeerDisassocSanity(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  VOID *Msg,
-	IN  ULONG MsgLen,
-	OUT PUCHAR pAddr2,
-	OUT USHORT *Reason);
-
-BOOLEAN PeerWpaMessageSanity(
-    IN 	PRTMP_ADAPTER 		pAd,
-    IN 	PEAPOL_PACKET 		pMsg,
-    IN 	ULONG 				MsgLen,
-    IN 	UCHAR				MsgType,
-    IN 	MAC_TABLE_ENTRY  	*pEntry);
-
-BOOLEAN PeerDeauthSanity(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  VOID *Msg,
-	IN  ULONG MsgLen,
-	OUT PUCHAR pAddr2,
-	OUT USHORT *Reason);
-
-BOOLEAN PeerProbeReqSanity(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  VOID *Msg,
-	IN  ULONG MsgLen,
-	OUT PUCHAR pAddr2,
-	OUT CHAR Ssid[],
-	OUT UCHAR *pSsidLen);
-
-BOOLEAN GetTimBit(
-	IN  CHAR *Ptr,
-	IN  USHORT Aid,
-	OUT UCHAR *TimLen,
-	OUT UCHAR *BcastFlag,
-	OUT UCHAR *DtimCount,
-	OUT UCHAR *DtimPeriod,
-	OUT UCHAR *MessageToMe);
-
-UCHAR ChannelSanity(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR channel);
-
-NDIS_802_11_NETWORK_TYPE NetworkTypeInUseSanity(
-	IN PBSS_ENTRY pBss);
-
-BOOLEAN MlmeDelBAReqSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen);
-
-BOOLEAN MlmeAddBAReqSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pAddr2);
-
-ULONG MakeOutgoingFrame(
-	OUT CHAR *Buffer,
-	OUT ULONG *Length, ...);
-
-VOID  LfsrInit(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  ULONG Seed);
-
-UCHAR RandomByte(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID AsicUpdateAutoFallBackTable(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pTxRate);
-
-VOID  MlmePeriodicExec(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-VOID LinkDownExec(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-VOID LinkUpExec(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-VOID STAMlmePeriodicExec(
-	PRTMP_ADAPTER pAd);
-
-VOID MlmeAutoScan(
-	IN PRTMP_ADAPTER pAd);
-
-VOID MlmeAutoReconnectLastSSID(
-	IN PRTMP_ADAPTER pAd);
-
-BOOLEAN MlmeValidateSSID(
-	IN PUCHAR pSsid,
-	IN UCHAR  SsidLen);
-
-VOID MlmeCheckForRoaming(
-	IN PRTMP_ADAPTER pAd,
-	IN ULONG    Now32);
-
-VOID MlmeCheckForFastRoaming(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  ULONG           Now);
-
-VOID MlmeDynamicTxRateSwitching(
-	IN PRTMP_ADAPTER pAd);
-
-VOID MlmeSetTxRate(
-	IN PRTMP_ADAPTER		pAd,
-	IN PMAC_TABLE_ENTRY		pEntry,
-	IN PRTMP_TX_RATE_SWITCH	pTxRate);
-
-VOID MlmeSelectTxRateTable(
-	IN PRTMP_ADAPTER		pAd,
-	IN PMAC_TABLE_ENTRY		pEntry,
-	IN PUCHAR				*ppTable,
-	IN PUCHAR				pTableSize,
-	IN PUCHAR				pInitTxRateIdx);
-
-VOID MlmeCalculateChannelQuality(
-	IN PRTMP_ADAPTER pAd,
-	IN ULONG Now);
-
-VOID MlmeCheckPsmChange(
-	IN PRTMP_ADAPTER pAd,
-	IN ULONG    Now32);
-
-VOID MlmeSetPsmBit(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT psm);
-
-VOID MlmeSetTxPreamble(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT TxPreamble);
-
-VOID UpdateBasicRateBitmap(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID MlmeUpdateTxRates(
-	IN PRTMP_ADAPTER 	pAd,
-	IN 	BOOLEAN		 	bLinkUp,
-	IN	UCHAR			apidx);
-
-#ifdef DOT11_N_SUPPORT
-VOID MlmeUpdateHtTxRates(
-	IN PRTMP_ADAPTER 		pAd,
-	IN	UCHAR				apidx);
-#endif // DOT11_N_SUPPORT //
-
-VOID    RTMPCheckRates(
-	IN      PRTMP_ADAPTER   pAd,
-	IN OUT  UCHAR           SupRate[],
-	IN OUT  UCHAR           *SupRateLen);
-
-#ifdef CONFIG_STA_SUPPORT
-BOOLEAN RTMPCheckChannel(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR		CentralChannel,
-	IN UCHAR		Channel);
-#endif // CONFIG_STA_SUPPORT //
-
-BOOLEAN 	RTMPCheckHt(
-	IN		PRTMP_ADAPTER	pAd,
-	IN		UCHAR	Wcid,
-	IN OUT	HT_CAPABILITY_IE			*pHtCapability,
-	IN OUT	ADD_HT_INFO_IE			*pAddHtInfo);
-
-VOID StaQuickResponeForRateUpExec(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-VOID AsicBbpTuning1(
-	IN PRTMP_ADAPTER pAd);
-
-VOID AsicBbpTuning2(
-	IN PRTMP_ADAPTER pAd);
-
-VOID RTMPUpdateMlmeRate(
-	IN PRTMP_ADAPTER	pAd);
-
-CHAR RTMPMaxRssi(
-	IN PRTMP_ADAPTER	pAd,
-	IN CHAR				Rssi0,
-	IN CHAR				Rssi1,
-	IN CHAR				Rssi2);
-
-VOID AsicSetRxAnt(
-	IN PRTMP_ADAPTER	pAd,
-	IN UCHAR			Ant);
-
-VOID AsicEvaluateRxAnt(
-	IN PRTMP_ADAPTER	pAd);
-
-VOID AsicRxAntEvalTimeout(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-VOID APSDPeriodicExec(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-BOOLEAN RTMPCheckEntryEnableAutoRateSwitch(
-	IN PRTMP_ADAPTER    pAd,
-	IN PMAC_TABLE_ENTRY	pEntry);
-
-UCHAR RTMPStaFixedTxMode(
-	IN PRTMP_ADAPTER    pAd,
-	IN PMAC_TABLE_ENTRY	pEntry);
-
-VOID RTMPUpdateLegacyTxSetting(
-		UCHAR				fixed_tx_mode,
-		PMAC_TABLE_ENTRY	pEntry);
-
-BOOLEAN RTMPAutoRateSwitchCheck(
-	IN PRTMP_ADAPTER    pAd);
-
-NDIS_STATUS MlmeInit(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID MlmeHandler(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID MlmeHalt(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID MlmeResetRalinkCounters(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID BuildChannelList(
-	IN PRTMP_ADAPTER pAd);
-
-UCHAR FirstChannel(
-	IN  PRTMP_ADAPTER   pAd);
-
-UCHAR NextChannel(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR channel);
-
-VOID ChangeToCellPowerLimit(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR         AironetCellPowerLimit);
-
-VOID RaiseClock(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UINT32 *x);
-
-VOID LowerClock(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UINT32 *x);
-
-USHORT ShiftInBits(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID ShiftOutBits(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  USHORT data,
-	IN  USHORT count);
-
-VOID EEpromCleanup(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID EWDS(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID EWEN(
-	IN  PRTMP_ADAPTER   pAd);
-
-USHORT RTMP_EEPROM_READ16(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  USHORT Offset);
-
-VOID RTMP_EEPROM_WRITE16(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  USHORT Offset,
-	IN  USHORT Data);
-
-//
-// Prototypes of function definition in rtmp_tkip.c
-//
-VOID    RTMPInitTkipEngine(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pTKey,
-	IN  UCHAR           KeyId,
-	IN  PUCHAR          pTA,
-	IN  PUCHAR          pMICKey,
-	IN  PUCHAR          pTSC,
-	OUT PULONG          pIV16,
-	OUT PULONG          pIV32);
-
-VOID    RTMPInitMICEngine(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pKey,
-	IN  PUCHAR          pDA,
-	IN  PUCHAR          pSA,
-	IN  UCHAR           UserPriority,
-	IN  PUCHAR          pMICKey);
-
-BOOLEAN RTMPTkipCompareMICValue(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pSrc,
-	IN  PUCHAR          pDA,
-	IN  PUCHAR          pSA,
-	IN  PUCHAR          pMICKey,
-	IN	UCHAR			UserPriority,
-	IN  UINT            Len);
-
-VOID    RTMPCalculateMICValue(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PNDIS_PACKET    pPacket,
-	IN  PUCHAR          pEncap,
-	IN  PCIPHER_KEY     pKey,
-	IN	UCHAR			apidx);
-
-BOOLEAN RTMPTkipCompareMICValueWithLLC(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pLLC,
-	IN  PUCHAR          pSrc,
-	IN  PUCHAR          pDA,
-	IN  PUCHAR          pSA,
-	IN  PUCHAR          pMICKey,
-	IN  UINT            Len);
-
-VOID    RTMPTkipAppendByte(
-	IN  PTKIP_KEY_INFO  pTkip,
-	IN  UCHAR           uChar);
-
-VOID    RTMPTkipAppend(
-	IN  PTKIP_KEY_INFO  pTkip,
-	IN  PUCHAR          pSrc,
-	IN  UINT            nBytes);
-
-VOID    RTMPTkipGetMIC(
-	IN  PTKIP_KEY_INFO  pTkip);
-
-BOOLEAN RTMPSoftDecryptTKIP(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR	pData,
-	IN ULONG	DataByteCnt,
-	IN UCHAR    UserPriority,
-	IN PCIPHER_KEY	pWpaKey);
-
-BOOLEAN RTMPSoftDecryptAES(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR	pData,
-	IN ULONG	DataByteCnt,
-	IN PCIPHER_KEY	pWpaKey);
-
-//
-// Prototypes of function definition in cmm_info.c
-//
-NDIS_STATUS RTMPWPARemoveKeyProc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PVOID           pBuf);
-
-VOID    RTMPWPARemoveAllKeys(
-	IN  PRTMP_ADAPTER   pAd);
-
-BOOLEAN RTMPCheckStrPrintAble(
-    IN  CHAR *pInPutStr,
-    IN  UCHAR strLen);
-
-VOID    RTMPSetPhyMode(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  ULONG phymode);
-
-VOID	RTMPUpdateHTIE(
-	IN	RT_HT_CAPABILITY	*pRtHt,
-	IN		UCHAR				*pMcsSet,
-	OUT		HT_CAPABILITY_IE *pHtCapability,
-	OUT		ADD_HT_INFO_IE		*pAddHtInfo);
-
-VOID	RTMPAddWcidAttributeEntry(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			BssIdx,
-	IN 	UCHAR		 	KeyIdx,
-	IN 	UCHAR		 	CipherAlg,
-	IN 	MAC_TABLE_ENTRY *pEntry);
-
-CHAR *GetEncryptType(
-	CHAR enc);
-
-CHAR *GetAuthMode(
-	CHAR auth);
-
-VOID RTMPIoctlGetSiteSurvey(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq);
-
-VOID RTMPIoctlGetMacTable(
-	IN PRTMP_ADAPTER pAd,
-	IN struct iwreq *wrq);
-
-VOID RTMPIndicateWPA2Status(
-	IN  PRTMP_ADAPTER  pAdapter);
-
-VOID	RTMPOPModeSwitching(
-	IN	PRTMP_ADAPTER	pAd);
-
-#ifdef CONFIG_STA_SUPPORT
-VOID    RTMPAddBSSIDCipher(
-    IN  PRTMP_ADAPTER   pAd,
-	IN	UCHAR	Aid,
-    IN  PNDIS_802_11_KEY    pKey,
-    IN  UCHAR   CipherAlg);
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef DOT11_N_SUPPORT
-VOID	RTMPSetHT(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	OID_SET_HT_PHYMODE *pHTPhyMode);
-
-VOID	RTMPSetIndividualHT(
-	IN	PRTMP_ADAPTER		pAd,
-	IN	UCHAR				apidx);
-#endif // DOT11_N_SUPPORT //
-
-VOID RTMPSendWirelessEvent(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT			Event_flag,
-	IN	PUCHAR 			pAddr,
-	IN  UCHAR			BssIdx,
-	IN	CHAR			Rssi);
-
-VOID	NICUpdateCntlCounters(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PHEADER_802_11	pHeader,
-	IN    UCHAR			SubType,
-	IN	PRXWI_STRUC 	pRxWI);
-//
-// prototype in wpa.c
-//
-BOOLEAN WpaMsgTypeSubst(
-	IN  UCHAR   EAPType,
-	OUT INT		*MsgType);
-
-VOID WpaPskStateMachineInit(
-	IN  PRTMP_ADAPTER       pAd,
-	IN  STATE_MACHINE       *S,
-	OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID WpaEAPOLKeyAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID    WpaPairMsg1Action(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID    WpaPairMsg3Action(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID    WpaGroupMsg1Action(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID    WpaMacHeaderInit(
-	IN      PRTMP_ADAPTER   pAd,
-	IN OUT  PHEADER_802_11  pHdr80211,
-	IN      UCHAR           wep,
-	IN      PUCHAR          pAddr1);
-
-VOID    Wpa2PairMsg1Action(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  MLME_QUEUE_ELEM *Elem);
-
-VOID    Wpa2PairMsg3Action(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  MLME_QUEUE_ELEM *Elem);
-
-BOOLEAN ParseKeyData(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          pKeyData,
-    IN  UCHAR           KeyDataLen,
-	IN	UCHAR			bPairewise);
-
-VOID    RTMPToWirelessSta(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pHeader802_3,
-    IN  UINT            HdrLen,
-	IN  PUCHAR          pData,
-    IN  UINT            DataLen,
-    IN	BOOLEAN			is4wayFrame);
-
-VOID    HMAC_SHA1(
-	IN  UCHAR   *text,
-	IN  UINT    text_len,
-	IN  UCHAR   *key,
-	IN  UINT    key_len,
-	IN  UCHAR   *digest);
-
-VOID    PRF(
-	IN  UCHAR   *key,
-	IN  INT     key_len,
-	IN  UCHAR   *prefix,
-	IN  INT     prefix_len,
-	IN  UCHAR   *data,
-	IN  INT     data_len,
-	OUT UCHAR   *output,
-	IN  INT     len);
-
-VOID    CCKMPRF(
-	IN  UCHAR   *key,
-	IN  INT     key_len,
-	IN  UCHAR   *data,
-	IN  INT     data_len,
-	OUT UCHAR   *output,
-	IN  INT     len);
-
-VOID WpaCountPTK(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR   *PMK,
-	IN  UCHAR   *ANonce,
-	IN  UCHAR   *AA,
-	IN  UCHAR   *SNonce,
-	IN  UCHAR   *SA,
-	OUT UCHAR   *output,
-	IN  UINT    len);
-
-VOID    GenRandom(
-	IN  PRTMP_ADAPTER   pAd,
-	IN	UCHAR			*macAddr,
-	OUT	UCHAR			*random);
-
-//
-// prototype in aironet.c
-//
-VOID    AironetStateMachineInit(
-	IN  PRTMP_ADAPTER       pAd,
-	IN  STATE_MACHINE       *S,
-	OUT STATE_MACHINE_FUNC  Trans[]);
-
-VOID    AironetMsgAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID    AironetRequestAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID    ChannelLoadRequestAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR           Index);
-
-VOID    NoiseHistRequestAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR           Index);
-
-VOID    BeaconRequestAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR           Index);
-
-VOID    AironetReportAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem);
-
-VOID    ChannelLoadReportAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR           Index);
-
-VOID    NoiseHistReportAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR           Index);
-
-VOID    AironetFinalReportAction(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID    BeaconReportAction(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UCHAR           Index);
-
-VOID    AironetAddBeaconReport(
-	IN  PRTMP_ADAPTER       pAd,
-	IN  ULONG               Index,
-	IN  PMLME_QUEUE_ELEM    pElem);
-
-VOID    AironetCreateBeaconReportFromBssTable(
-	IN  PRTMP_ADAPTER       pAd);
-
-VOID    DBGPRINT_TX_RING(
-	IN PRTMP_ADAPTER  pAd,
-	IN UCHAR          QueIdx);
-
-VOID DBGPRINT_RX_RING(
-	IN PRTMP_ADAPTER  pAd);
-
-CHAR    ConvertToRssi(
-	IN PRTMP_ADAPTER  pAd,
-	IN CHAR				Rssi,
-	IN UCHAR    RssiNumber);
-
-
-#ifdef DOT11N_DRAFT3
-VOID BuildEffectedChannelList(
-	IN PRTMP_ADAPTER pAd);
-#endif // DOT11N_DRAFT3 //
-
-
-VOID APAsicEvaluateRxAnt(
-	IN PRTMP_ADAPTER	pAd);
-
-
-VOID APAsicRxAntEvalTimeout(
-	IN PRTMP_ADAPTER	pAd);
-
-//
-// function prototype in cmm_wpa.c
-//
-BOOLEAN RTMPCheckWPAframe(
-	IN PRTMP_ADAPTER pAd,
-	IN PMAC_TABLE_ENTRY	pEntry,
-	IN PUCHAR 			pData,
-	IN ULONG 			DataByteCount,
-	IN UCHAR			FromWhichBSSID);
-
-VOID AES_GTK_KEY_UNWRAP(
-	IN  UCHAR   *key,
-	OUT UCHAR   *plaintext,
-	IN	UCHAR	c_len,
-	IN  UCHAR   *ciphertext);
-
-BOOLEAN RTMPCheckRSNIE(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pData,
-	IN  UCHAR           DataLen,
-	IN  MAC_TABLE_ENTRY *pEntry,
-	OUT	UCHAR			*Offset);
-
-BOOLEAN RTMPParseEapolKeyData(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pKeyData,
-	IN  UCHAR           KeyDataLen,
-	IN	UCHAR			GroupKeyIndex,
-	IN	UCHAR			MsgType,
-	IN	BOOLEAN			bWPA2,
-	IN  MAC_TABLE_ENTRY *pEntry);
-
-VOID	ConstructEapolMsg(
-	IN 	PRTMP_ADAPTER    	pAd,
-    IN 	UCHAR				PeerAuthMode,
-    IN 	UCHAR				PeerWepStatus,
-    IN 	UCHAR				MyGroupKeyWepStatus,
-    IN 	UCHAR				MsgType,
-    IN	UCHAR				DefaultKeyIdx,
-    IN 	UCHAR				*ReplayCounter,
-	IN 	UCHAR				*KeyNonce,
-	IN	UCHAR				*TxRSC,
-	IN	UCHAR				*PTK,
-	IN	UCHAR				*GTK,
-	IN	UCHAR				*RSNIE,
-	IN	UCHAR				RSNIE_Len,
-    OUT PEAPOL_PACKET       pMsg);
-
-VOID	CalculateMIC(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			PeerWepStatus,
-	IN	UCHAR			*PTK,
-	OUT PEAPOL_PACKET   pMsg);
-
-NDIS_STATUS	RTMPSoftDecryptBroadCastData(
-	IN	PRTMP_ADAPTER					pAd,
-	IN	RX_BLK							*pRxBlk,
-	IN  NDIS_802_11_ENCRYPTION_STATUS 	GroupCipher,
-	IN  PCIPHER_KEY						pShard_key);
-
-VOID	ConstructEapolKeyData(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			PeerAuthMode,
-	IN	UCHAR			PeerWepStatus,
-	IN	UCHAR			GroupKeyWepStatus,
-	IN 	UCHAR			MsgType,
-	IN	UCHAR			DefaultKeyIdx,
-	IN	BOOLEAN			bWPA2Capable,
-	IN	UCHAR			*PTK,
-	IN	UCHAR			*GTK,
-	IN	UCHAR			*RSNIE,
-	IN	UCHAR			RSNIE_LEN,
-	OUT PEAPOL_PACKET   pMsg);
-
-VOID RTMPMakeRSNIE(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  UINT            AuthMode,
-	IN  UINT            WepStatus,
-	IN	UCHAR			apidx);
-
-//
-// function prototype in ap_wpa.c
-//
-
-BOOLEAN APWpaMsgTypeSubst(
-	IN UCHAR    EAPType,
-	OUT INT *MsgType) ;
-
-MAC_TABLE_ENTRY *PACInquiry(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  ULONG           Wcid);
-
-BOOLEAN RTMPCheckMcast(
-	IN PRTMP_ADAPTER pAd,
-	IN PEID_STRUCT      eid_ptr,
-	IN MAC_TABLE_ENTRY  *pEntry);
-
-BOOLEAN RTMPCheckUcast(
-	IN PRTMP_ADAPTER pAd,
-	IN PEID_STRUCT      eid_ptr,
-	IN MAC_TABLE_ENTRY  *pEntry);
-
-BOOLEAN RTMPCheckAUTH(
-	IN PRTMP_ADAPTER pAd,
-	IN PEID_STRUCT      eid_ptr,
-	IN MAC_TABLE_ENTRY  *pEntry);
-
-VOID WPAStart4WayHS(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MAC_TABLE_ENTRY *pEntry,
-	IN	ULONG			TimeInterval);
-
-VOID WPAStart2WayGroupHS(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MAC_TABLE_ENTRY *pEntry);
-
-VOID APWpaEAPPacketAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID APWpaEAPOLStartAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID APWpaEAPOLLogoffAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID APWpaEAPOLKeyAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID APWpaEAPOLASFAlertAction(
-	IN  PRTMP_ADAPTER    pAd,
-	IN  MLME_QUEUE_ELEM  *Elem);
-
-VOID HandleCounterMeasure(
-	IN PRTMP_ADAPTER pAd,
-	IN MAC_TABLE_ENTRY  *pEntry);
-
-VOID PeerPairMsg2Action(
-	IN PRTMP_ADAPTER pAd,
-	IN MAC_TABLE_ENTRY  *pEntry,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerPairMsg4Action(
-	IN PRTMP_ADAPTER pAd,
-	IN MAC_TABLE_ENTRY  *pEntry,
-	IN MLME_QUEUE_ELEM *Elem);
-
-VOID CMTimerExec(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-VOID WPARetryExec(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3);
-
-VOID EnqueueStartForPSKExec(
-    IN PVOID SystemSpecific1,
-    IN PVOID FunctionContext,
-    IN PVOID SystemSpecific2,
-    IN PVOID SystemSpecific3);
-
-VOID RTMPHandleSTAKey(
-    IN PRTMP_ADAPTER    pAdapter,
-    IN MAC_TABLE_ENTRY  *pEntry,
-    IN MLME_QUEUE_ELEM  *Elem);
-
-VOID PeerGroupMsg2Action(
-	IN  PRTMP_ADAPTER    pAd,
-	IN  PMAC_TABLE_ENTRY pEntry,
-	IN  VOID             *Msg,
-	IN  UINT             MsgLen);
-
-VOID PairDisAssocAction(
-	IN  PRTMP_ADAPTER    pAd,
-	IN  PMAC_TABLE_ENTRY pEntry,
-	IN  USHORT           Reason);
-
-VOID MlmeDeAuthAction(
-	IN  PRTMP_ADAPTER    pAd,
-	IN  PMAC_TABLE_ENTRY pEntry,
-	IN  USHORT           Reason);
-
-VOID GREKEYPeriodicExec(
-	IN  PVOID   SystemSpecific1,
-	IN  PVOID   FunctionContext,
-	IN  PVOID   SystemSpecific2,
-	IN  PVOID   SystemSpecific3);
-
-VOID CountGTK(
-	IN  UCHAR   *PMK,
-	IN  UCHAR   *GNonce,
-	IN  UCHAR   *AA,
-	OUT UCHAR   *output,
-	IN  UINT    len);
-
-VOID    GetSmall(
-	IN  PVOID   pSrc1,
-	IN  PVOID   pSrc2,
-	OUT PUCHAR  out,
-	IN  ULONG   Length);
-
-VOID    GetLarge(
-	IN  PVOID   pSrc1,
-	IN  PVOID   pSrc2,
-	OUT PUCHAR  out,
-	IN  ULONG   Length);
-
-VOID APGenRandom(
-	IN PRTMP_ADAPTER pAd,
-	OUT UCHAR       *random);
-
-VOID AES_GTK_KEY_WRAP(
-	IN UCHAR *key,
-	IN UCHAR *plaintext,
-	IN UCHAR p_len,
-	OUT UCHAR *ciphertext);
-
-VOID    WpaSend(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          pPacket,
-    IN  ULONG           Len);
-
-VOID    APToWirelessSta(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MAC_TABLE_ENTRY *pEntry,
-	IN  PUCHAR          pHeader802_3,
-	IN  UINT            HdrLen,
-	IN  PUCHAR          pData,
-	IN  UINT            DataLen,
-    IN	BOOLEAN			bClearFrame);
-
-VOID RTMPAddPMKIDCache(
-	IN  PRTMP_ADAPTER   		pAd,
-	IN	INT						apidx,
-	IN	PUCHAR				pAddr,
-	IN	UCHAR					*PMKID,
-	IN	UCHAR					*PMK);
-
-INT RTMPSearchPMKIDCache(
-	IN  PRTMP_ADAPTER   pAd,
-	IN	INT				apidx,
-	IN	PUCHAR		pAddr);
-
-VOID RTMPDeletePMKIDCache(
-	IN  PRTMP_ADAPTER   pAd,
-	IN	INT				apidx,
-	IN  INT				idx);
-
-VOID RTMPMaintainPMKIDCache(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID	RTMPSendTriggerFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PVOID			pBuffer,
-	IN	ULONG			Length,
-	IN  UCHAR           TxRate,
-	IN	BOOLEAN			bQosNull);
-
-#ifdef RT30xx
-VOID RTMPFilterCalibration(
-	IN PRTMP_ADAPTER pAd);
-#endif // RT30xx //
-
-
-//typedef void (*TIMER_FUNCTION)(unsigned long);
-
-
-/* timeout -- ms */
-VOID RTMP_SetPeriodicTimer(
-	IN	NDIS_MINIPORT_TIMER *pTimer,
-	IN	unsigned long timeout);
-
-VOID RTMP_OS_Init_Timer(
-	IN	PRTMP_ADAPTER pAd,
-	IN	NDIS_MINIPORT_TIMER *pTimer,
-	IN	TIMER_FUNCTION function,
-	IN	PVOID data);
-
-VOID RTMP_OS_Add_Timer(
-	IN	NDIS_MINIPORT_TIMER	*pTimer,
-	IN	unsigned long timeout);
-
-VOID RTMP_OS_Mod_Timer(
-	IN	NDIS_MINIPORT_TIMER	*pTimer,
-	IN	unsigned long timeout);
-
-
-VOID RTMP_OS_Del_Timer(
-	IN	NDIS_MINIPORT_TIMER	*pTimer,
-	OUT	BOOLEAN				 *pCancelled);
-
-
-VOID RTMP_OS_Release_Packet(
-	IN	PRTMP_ADAPTER pAd,
-	IN	PQUEUE_ENTRY  pEntry);
-
-VOID RTMPusecDelay(
-	IN	ULONG	usec);
-
-NDIS_STATUS os_alloc_mem(
-	IN	PRTMP_ADAPTER pAd,
-	OUT	PUCHAR *mem,
-	IN	ULONG  size);
-
-NDIS_STATUS os_free_mem(
-	IN	PRTMP_ADAPTER pAd,
-	IN	PUCHAR mem);
-
-
-void RTMP_AllocateSharedMemory(
-	IN	PRTMP_ADAPTER pAd,
-	IN	ULONG	Length,
-	IN	BOOLEAN	Cached,
-	OUT	PVOID	*VirtualAddress,
-	OUT	PNDIS_PHYSICAL_ADDRESS PhysicalAddress);
-
-VOID RTMPFreeTxRxRingMemory(
-    IN  PRTMP_ADAPTER   pAd);
-
-NDIS_STATUS AdapterBlockAllocateMemory(
-	IN PVOID	handle,
-	OUT	PVOID	*ppAd);
-
-void RTMP_AllocateTxDescMemory(
-	IN	PRTMP_ADAPTER pAd,
-	IN	UINT	Index,
-	IN	ULONG	Length,
-	IN	BOOLEAN	Cached,
-	OUT	PVOID	*VirtualAddress,
-	OUT	PNDIS_PHYSICAL_ADDRESS PhysicalAddress);
-
-void RTMP_AllocateFirstTxBuffer(
-	IN	PRTMP_ADAPTER pAd,
-	IN	UINT	Index,
-	IN	ULONG	Length,
-	IN	BOOLEAN	Cached,
-	OUT	PVOID	*VirtualAddress,
-	OUT	PNDIS_PHYSICAL_ADDRESS PhysicalAddress);
-
-void RTMP_AllocateMgmtDescMemory(
-	IN	PRTMP_ADAPTER pAd,
-	IN	ULONG	Length,
-	IN	BOOLEAN	Cached,
-	OUT	PVOID	*VirtualAddress,
-	OUT	PNDIS_PHYSICAL_ADDRESS PhysicalAddress);
-
-void RTMP_AllocateRxDescMemory(
-	IN	PRTMP_ADAPTER pAd,
-	IN	ULONG	Length,
-	IN	BOOLEAN	Cached,
-	OUT	PVOID	*VirtualAddress,
-	OUT	PNDIS_PHYSICAL_ADDRESS PhysicalAddress);
-
-PNDIS_PACKET RTMP_AllocateRxPacketBuffer(
-	IN	PRTMP_ADAPTER pAd,
-	IN	ULONG	Length,
-	IN	BOOLEAN	Cached,
-	OUT	PVOID	*VirtualAddress,
-	OUT	PNDIS_PHYSICAL_ADDRESS PhysicalAddress);
-
-PNDIS_PACKET RTMP_AllocateTxPacketBuffer(
-	IN	PRTMP_ADAPTER pAd,
-	IN	ULONG	Length,
-	IN	BOOLEAN	Cached,
-	OUT	PVOID	*VirtualAddress);
-
-PNDIS_PACKET RTMP_AllocateFragPacketBuffer(
-	IN	PRTMP_ADAPTER pAd,
-	IN	ULONG	Length);
-
-void RTMP_QueryPacketInfo(
-	IN  PNDIS_PACKET pPacket,
-	OUT PACKET_INFO  *pPacketInfo,
-	OUT PUCHAR		 *pSrcBufVA,
-	OUT	UINT		 *pSrcBufLen);
-
-void RTMP_QueryNextPacketInfo(
-	IN  PNDIS_PACKET *ppPacket,
-	OUT PACKET_INFO  *pPacketInfo,
-	OUT PUCHAR		 *pSrcBufVA,
-	OUT	UINT		 *pSrcBufLen);
-
-
-BOOLEAN RTMP_FillTxBlkInfo(
-	IN RTMP_ADAPTER *pAd,
-	IN TX_BLK *pTxBlk);
-
-
-PRTMP_SCATTER_GATHER_LIST
-rt_get_sg_list_from_packet(PNDIS_PACKET pPacket, RTMP_SCATTER_GATHER_LIST *sg);
-
-
- void announce_802_3_packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket);
-
-
-UINT BA_Reorder_AMSDU_Annnounce(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket);
-
-
-UINT Handle_AMSDU_Packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pData,
-	IN	ULONG			DataSize,
-	IN  UCHAR			FromWhichBSSID);
-
-
-void convert_802_11_to_802_3_packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket,
-	IN	PUCHAR			p8023hdr,
-	IN	PUCHAR			pData,
-	IN	ULONG			DataSize,
-	IN  UCHAR			FromWhichBSSID);
-
-
-PNET_DEV get_netdev_from_bssid(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			FromWhichBSSID);
-
-
-PNDIS_PACKET duplicate_pkt(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pHeader802_3,
-    IN  UINT            HdrLen,
-	IN	PUCHAR			pData,
-	IN	ULONG			DataSize,
-	IN	UCHAR			FromWhichBSSID);
-
-
-PNDIS_PACKET duplicate_pkt_with_TKIP_MIC(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pOldPkt);
-
-PNDIS_PACKET duplicate_pkt_with_VLAN(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pHeader802_3,
-    IN  UINT            HdrLen,
-	IN	PUCHAR			pData,
-	IN	ULONG			DataSize,
-	IN	UCHAR			FromWhichBSSID);
-
-PNDIS_PACKET duplicate_pkt_with_WPI(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket,
-	IN	UINT32			ext_head_len,
-	IN	UINT32			ext_tail_len);
-
-UCHAR VLAN_8023_Header_Copy(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pHeader802_3,
-	IN	UINT            HdrLen,
-	OUT PUCHAR			pData,
-	IN	UCHAR			FromWhichBSSID);
-
-#ifdef DOT11_N_SUPPORT
-void ba_flush_reordering_timeout_mpdus(
-	IN PRTMP_ADAPTER	pAd,
-	IN PBA_REC_ENTRY	pBAEntry,
-	IN ULONG			Now32);
-
-
-VOID BAOriSessionSetUp(
-			IN PRTMP_ADAPTER    pAd,
-			IN MAC_TABLE_ENTRY	*pEntry,
-			IN UCHAR			TID,
-			IN USHORT			TimeOut,
-			IN ULONG			DelayTime,
-			IN BOOLEAN		isForced);
-
-VOID BASessionTearDownALL(
-	IN OUT	PRTMP_ADAPTER pAd,
-	IN		UCHAR Wcid);
-#endif // DOT11_N_SUPPORT //
-
-BOOLEAN OS_Need_Clone_Packet(void);
-
-
-VOID build_tx_packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket,
-	IN	PUCHAR	pFrame,
-	IN	ULONG	FrameLen);
-
-
-VOID BAOriSessionTearDown(
-	IN OUT	PRTMP_ADAPTER	pAd,
-	IN		UCHAR			Wcid,
-	IN		UCHAR			TID,
-	IN		BOOLEAN			bPassive,
-	IN		BOOLEAN			bForceSend);
-
-VOID BARecSessionTearDown(
-	IN OUT	PRTMP_ADAPTER	pAd,
-	IN		UCHAR			Wcid,
-	IN		UCHAR			TID,
-	IN		BOOLEAN			bPassive);
-
-BOOLEAN ba_reordering_resource_init(PRTMP_ADAPTER pAd, int num);
-void ba_reordering_resource_release(PRTMP_ADAPTER pAd);
-
-ULONG AutoChBssInsertEntry(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pBssid,
-	IN CHAR Ssid[],
-	IN UCHAR SsidLen,
-	IN UCHAR ChannelNo,
-	IN CHAR Rssi);
-
-void AutoChBssTableInit(
-	IN PRTMP_ADAPTER pAd);
-
-void ChannelInfoInit(
-	IN PRTMP_ADAPTER pAd);
-
-void AutoChBssTableDestroy(
-	IN PRTMP_ADAPTER pAd);
-
-void ChannelInfoDestroy(
-	IN PRTMP_ADAPTER pAd);
-
-UCHAR New_ApAutoSelectChannel(
-	IN PRTMP_ADAPTER pAd);
-
-
-#ifdef NINTENDO_AP
-VOID	InitNINTENDO_TABLE(
-	IN PRTMP_ADAPTER pAd);
-
-UCHAR	CheckNINTENDO_TABLE(
-	IN PRTMP_ADAPTER pAd,
-	PCHAR pDS_Ssid,
-	UCHAR DS_SsidLen,
-	PUCHAR pDS_Addr);
-
-UCHAR	DelNINTENDO_ENTRY(
-	IN	PRTMP_ADAPTER pAd,
-	UCHAR * pDS_Addr);
-
-VOID	RTMPIoctlNintendoCapable(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	struct iwreq	*wrq);
-
-VOID	RTMPIoctlNintendoGetTable(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	struct iwreq	*wrq);
-
-VOID	RTMPIoctlNintendoSetTable(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	struct iwreq	*wrq);
-
-#endif // NINTENDO_AP //
-
-BOOLEAN rtstrmactohex(
-	IN char *s1,
-	IN char *s2);
-
-BOOLEAN rtstrcasecmp(
-	IN char *s1,
-	IN char *s2);
-
-char *rtstrstruncasecmp(
-	IN char *s1,
-	IN char *s2);
-
-char    *rtstrstr(
-	IN	const char * s1,
-	IN	const char * s2);
-
-char *rstrtok(
-	IN char * s,
-	IN const char * ct);
-
-int rtinet_aton(
-	const char *cp,
-	unsigned int *addr);
-
-////////// common ioctl functions //////////
-INT Set_DriverVersion_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_CountryRegion_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_CountryRegionABand_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_WirelessMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_Channel_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ShortSlot_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_TxPower_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_BGProtection_Proc(
-	IN  PRTMP_ADAPTER		pAd,
-	IN  PUCHAR			arg);
-
-INT Set_TxPreamble_Proc(
-	IN  PRTMP_ADAPTER		pAd,
-	IN  PUCHAR			arg);
-
-INT Set_RTSThreshold_Proc(
-	IN  PRTMP_ADAPTER		pAd,
-	IN  PUCHAR			arg);
-
-INT Set_FragThreshold_Proc(
-	IN  PRTMP_ADAPTER		pAd,
-	IN  PUCHAR			arg);
-
-INT Set_TxBurst_Proc(
-	IN  PRTMP_ADAPTER		pAd,
-	IN  PUCHAR			arg);
-
-#ifdef AGGREGATION_SUPPORT
-INT	Set_PktAggregate_Proc(
-	IN  PRTMP_ADAPTER		pAd,
-	IN  PUCHAR			arg);
-#endif
-
-INT	Set_IEEE80211H_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-#ifdef DBG
-INT	Set_Debug_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-#endif
-
-INT	Show_DescInfo_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ResetStatCounter_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-#ifdef DOT11_N_SUPPORT
-INT	Set_BASetup_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_BADecline_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_BAOriTearDown_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_BARecTearDown_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtBw_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtMcs_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtGi_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtOpMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtStbc_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtHtc_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtExtcha_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtMpduDensity_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtBaWinSize_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtRdg_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtLinkAdapt_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtAmsdu_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtAutoBa_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtProtect_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtMimoPs_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-
-INT	Set_ForceShortGI_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ForceGF_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	SetCommonHT(
-	IN	PRTMP_ADAPTER	pAd);
-
-INT	Set_SendPSMPAction_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_HtMIMOPSmode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-
-INT	Set_HtTxBASize_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-#endif // DOT11_N_SUPPORT //
-
-
-
-#ifdef CONFIG_STA_SUPPORT
-//Dls ,	kathy
-VOID RTMPSendDLSTearDownFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pDA);
-
-#ifdef DOT11_N_SUPPORT
-//Block ACK
-VOID QueryBATABLE(
-	IN  PRTMP_ADAPTER pAd,
-	OUT PQUERYBA_TABLE pBAT);
-#endif // DOT11_N_SUPPORT //
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-INT	    WpaCheckEapCode(
-	IN  PRTMP_ADAPTER   	pAd,
-	IN  PUCHAR				pFrame,
-	IN  USHORT				FrameLen,
-	IN  USHORT				OffSet);
-
-VOID    WpaSendMicFailureToWpaSupplicant(
-    IN  PRTMP_ADAPTER       pAd,
-    IN  BOOLEAN             bUnicast);
-
-VOID    SendAssocIEsToWpaSupplicant(
-    IN  PRTMP_ADAPTER       pAd);
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-int wext_notify_event_assoc(
-	IN  RTMP_ADAPTER *pAd);
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-
-#endif // CONFIG_STA_SUPPORT //
-
-
-
-#ifdef DOT11_N_SUPPORT
-VOID Handle_BSS_Width_Trigger_Events(
-	IN PRTMP_ADAPTER pAd);
-
-void build_ext_channel_switch_ie(
-	IN PRTMP_ADAPTER pAd,
-	IN HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE *pIE);
-#endif // DOT11_N_SUPPORT //
-
-
-BOOLEAN APRxDoneInterruptHandle(
-	IN	PRTMP_ADAPTER	pAd);
-
-BOOLEAN STARxDoneInterruptHandle(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	BOOLEAN			argc);
-
-#ifdef DOT11_N_SUPPORT
-// AMPDU packet indication
-VOID Indicate_AMPDU_Packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID);
-
-// AMSDU packet indication
-VOID Indicate_AMSDU_Packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID);
-#endif // DOT11_N_SUPPORT //
-
-// Normal legacy Rx packet indication
-VOID Indicate_Legacy_Packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID);
-
-VOID Indicate_EAPOL_Packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID);
-
-void  update_os_packet_info(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID);
-
-void wlan_802_11_to_802_3_packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN	PUCHAR			pHeader802_3,
-	IN  UCHAR			FromWhichBSSID);
-
-UINT deaggregate_AMSDU_announce(
-	IN	PRTMP_ADAPTER	pAd,
-	PNDIS_PACKET		pPacket,
-	IN	PUCHAR			pData,
-	IN	ULONG			DataSize);
-
-
-#ifdef CONFIG_STA_SUPPORT
-// remove LLC and get 802_3 Header
-#define  RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(_pRxBlk, _pHeader802_3)	\
-{																				\
-	PUCHAR _pRemovedLLCSNAP = NULL, _pDA, _pSA;                                 \
-																				\
-	if (RX_BLK_TEST_FLAG(_pRxBlk, fRX_MESH))                                    \
-	{                                                                           \
-		_pDA = _pRxBlk->pHeader->Addr3;                                         \
-		_pSA = (PUCHAR)_pRxBlk->pHeader + sizeof(HEADER_802_11);                \
-	}                                                                           \
-	else                                                                        \
-	{                                                                           \
-		if (RX_BLK_TEST_FLAG(_pRxBlk, fRX_INFRA))                              	\
-		{                                                                       \
-			_pDA = _pRxBlk->pHeader->Addr1;                                     \
-		if (RX_BLK_TEST_FLAG(_pRxBlk, fRX_DLS))									\
-			_pSA = _pRxBlk->pHeader->Addr2;										\
-		else																	\
-			_pSA = _pRxBlk->pHeader->Addr3;                                     \
-		}                                                                       \
-		else                                                                    \
-		{                                                                       \
-			_pDA = _pRxBlk->pHeader->Addr1;                                     \
-			_pSA = _pRxBlk->pHeader->Addr2;                                     \
-		}                                                                       \
-	}                                                                           \
-																				\
-	CONVERT_TO_802_3(_pHeader802_3, _pDA, _pSA, _pRxBlk->pData, 				\
-		_pRxBlk->DataSize, _pRemovedLLCSNAP);                                   \
-}
-#endif // CONFIG_STA_SUPPORT //
-
-
-BOOLEAN APFowardWirelessStaToWirelessSta(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket,
-	IN	ULONG			FromWhichBSSID);
-
-VOID Announce_or_Forward_802_3_Packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket,
-	IN	UCHAR			FromWhichBSSID);
-
-VOID Sta_Announce_or_Forward_802_3_Packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket,
-	IN	UCHAR			FromWhichBSSID);
-
-
-#ifdef CONFIG_STA_SUPPORT
-#define ANNOUNCE_OR_FORWARD_802_3_PACKET(_pAd, _pPacket, _FromWhichBSS)\
-			Sta_Announce_or_Forward_802_3_Packet(_pAd, _pPacket, _FromWhichBSS);
-			//announce_802_3_packet(_pAd, _pPacket);
-#endif // CONFIG_STA_SUPPORT //
-
-
-PNDIS_PACKET DuplicatePacket(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket,
-	IN	UCHAR			FromWhichBSSID);
-
-
-PNDIS_PACKET ClonePacket(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket,
-	IN	PUCHAR			pData,
-	IN	ULONG			DataSize);
-
-
-// Normal, AMPDU or AMSDU
-VOID CmmRxnonRalinkFrameIndicate(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID);
-
-VOID CmmRxRalinkFrameIndicate(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MAC_TABLE_ENTRY	*pEntry,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID);
-
-VOID Update_Rssi_Sample(
-	IN PRTMP_ADAPTER	pAd,
-	IN RSSI_SAMPLE		*pRssi,
-	IN PRXWI_STRUC		pRxWI);
-
-PNDIS_PACKET GetPacketFromRxRing(
-	IN		PRTMP_ADAPTER	pAd,
-	OUT		PRT28XX_RXD_STRUC		pSaveRxD,
-	OUT		BOOLEAN			*pbReschedule,
-	IN OUT	UINT32			*pRxPending);
-
-PNDIS_PACKET RTMPDeFragmentDataFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk);
-
-////////////////////////////////////////
-
-
-
-
-
-#ifdef SNMP_SUPPORT
-//for snmp , kathy
-typedef struct _DefaultKeyIdxValue
-{
-	UCHAR	KeyIdx;
-	UCHAR	Value[16];
-} DefaultKeyIdxValue, *PDefaultKeyIdxValue;
-#endif
-
-
-#ifdef CONFIG_STA_SUPPORT
-enum {
-	DIDmsg_lnxind_wlansniffrm		= 0x00000044,
-	DIDmsg_lnxind_wlansniffrm_hosttime	= 0x00010044,
-	DIDmsg_lnxind_wlansniffrm_mactime	= 0x00020044,
-	DIDmsg_lnxind_wlansniffrm_channel	= 0x00030044,
-	DIDmsg_lnxind_wlansniffrm_rssi		= 0x00040044,
-	DIDmsg_lnxind_wlansniffrm_sq		= 0x00050044,
-	DIDmsg_lnxind_wlansniffrm_signal	= 0x00060044,
-	DIDmsg_lnxind_wlansniffrm_noise		= 0x00070044,
-	DIDmsg_lnxind_wlansniffrm_rate		= 0x00080044,
-	DIDmsg_lnxind_wlansniffrm_istx		= 0x00090044,
-	DIDmsg_lnxind_wlansniffrm_frmlen	= 0x000A0044
-};
-enum {
-	P80211ENUM_msgitem_status_no_value	= 0x00
-};
-enum {
-	P80211ENUM_truth_false			= 0x00,
-	P80211ENUM_truth_true			= 0x01
-};
-
-/* Definition from madwifi */
-typedef struct {
-        UINT32 did;
-        UINT16 status;
-        UINT16 len;
-        UINT32 data;
-} p80211item_uint32_t;
-
-typedef struct {
-        UINT32 msgcode;
-        UINT32 msglen;
-#define WLAN_DEVNAMELEN_MAX 16
-        UINT8 devname[WLAN_DEVNAMELEN_MAX];
-        p80211item_uint32_t hosttime;
-        p80211item_uint32_t mactime;
-        p80211item_uint32_t channel;
-        p80211item_uint32_t rssi;
-        p80211item_uint32_t sq;
-        p80211item_uint32_t signal;
-        p80211item_uint32_t noise;
-        p80211item_uint32_t rate;
-        p80211item_uint32_t istx;
-        p80211item_uint32_t frmlen;
-} wlan_ng_prism2_header;
-
-/* The radio capture header precedes the 802.11 header. */
-typedef struct PACKED _ieee80211_radiotap_header {
-    UINT8	it_version;	/* Version 0. Only increases
-				 * for drastic changes,
-				 * introduction of compatible
-				 * new fields does not count.
-				 */
-    UINT8	it_pad;
-    UINT16     it_len;         /* length of the whole
-				 * header in bytes, including
-				 * it_version, it_pad,
-				 * it_len, and data fields.
-				 */
-    UINT32   it_present;	/* A bitmap telling which
-					 * fields are present. Set bit 31
-					 * (0x80000000) to extend the
-					 * bitmap by another 32 bits.
-					 * Additional extensions are made
-					 * by setting bit 31.
-					 */
-}ieee80211_radiotap_header ;
-
-enum ieee80211_radiotap_type {
-    IEEE80211_RADIOTAP_TSFT = 0,
-    IEEE80211_RADIOTAP_FLAGS = 1,
-    IEEE80211_RADIOTAP_RATE = 2,
-    IEEE80211_RADIOTAP_CHANNEL = 3,
-    IEEE80211_RADIOTAP_FHSS = 4,
-    IEEE80211_RADIOTAP_DBM_ANTSIGNAL = 5,
-    IEEE80211_RADIOTAP_DBM_ANTNOISE = 6,
-    IEEE80211_RADIOTAP_LOCK_QUALITY = 7,
-    IEEE80211_RADIOTAP_TX_ATTENUATION = 8,
-    IEEE80211_RADIOTAP_DB_TX_ATTENUATION = 9,
-    IEEE80211_RADIOTAP_DBM_TX_POWER = 10,
-    IEEE80211_RADIOTAP_ANTENNA = 11,
-    IEEE80211_RADIOTAP_DB_ANTSIGNAL = 12,
-    IEEE80211_RADIOTAP_DB_ANTNOISE = 13
-};
-
-#define WLAN_RADIOTAP_PRESENT (			\
-	(1 << IEEE80211_RADIOTAP_TSFT)	|	\
-	(1 << IEEE80211_RADIOTAP_FLAGS) |	\
-	(1 << IEEE80211_RADIOTAP_RATE)  | 	\
-	 0)
-
-typedef struct _wlan_radiotap_header {
-	ieee80211_radiotap_header wt_ihdr;
-	INT64 wt_tsft;
-	UINT8 wt_flags;
-	UINT8 wt_rate;
-} wlan_radiotap_header;
-/* Definition from madwifi */
-
-void send_monitor_packets(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk);
-
-#if WIRELESS_EXT >= 12
-// This function will be called when query /proc
-struct iw_statistics *rt28xx_get_wireless_stats(
-    IN struct net_device *net_dev);
-#endif
-
-VOID    RTMPSetDesiredRates(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  LONG            Rates);
-#endif // CONFIG_STA_SUPPORT //
-
-INT	Set_FixedTxMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-#ifdef CONFIG_APSTA_MIXED_SUPPORT
-INT	Set_OpMode_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-#endif // CONFIG_APSTA_MIXED_SUPPORT //
-
-static inline char* GetPhyMode(
-	int Mode)
-{
-	switch(Mode)
-	{
-		case MODE_CCK:
-			return "CCK";
-
-		case MODE_OFDM:
-			return "OFDM";
-#ifdef DOT11_N_SUPPORT
-		case MODE_HTMIX:
-			return "HTMIX";
-
-		case MODE_HTGREENFIELD:
-			return "GREEN";
-#endif // DOT11_N_SUPPORT //
-		default:
-			return "N/A";
-	}
-}
-
-
-static inline char* GetBW(
-	int BW)
-{
-	switch(BW)
-	{
-		case BW_10:
-			return "10M";
-
-		case BW_20:
-			return "20M";
-#ifdef DOT11_N_SUPPORT
-		case BW_40:
-			return "40M";
-#endif // DOT11_N_SUPPORT //
-		default:
-			return "N/A";
-	}
-}
-
-
-VOID RT28xxThreadTerminate(
-	IN RTMP_ADAPTER *pAd);
-
-BOOLEAN RT28XXChipsetCheck(
-	IN void *_dev_p);
-
-BOOLEAN RT28XXNetDevInit(
-	IN void 				*_dev_p,
-	IN struct  net_device	*net_dev,
-	IN RTMP_ADAPTER 		*pAd);
-
-BOOLEAN RT28XXProbePostConfig(
-	IN void 				*_dev_p,
-	IN RTMP_ADAPTER 		*pAd,
-	IN INT32				argc);
-
-VOID RT28XXDMADisable(
-	IN RTMP_ADAPTER 		*pAd);
-
-VOID RT28XXDMAEnable(
-	IN RTMP_ADAPTER 		*pAd);
-
-VOID RT28xx_UpdateBeaconToAsic(
-	IN RTMP_ADAPTER * pAd,
-	IN INT apidx,
-	IN ULONG BeaconLen,
-	IN ULONG UpdatePos);
-
-INT rt28xx_ioctl(
-	IN	struct net_device	*net_dev,
-	IN	OUT	struct ifreq	*rq,
-	IN	INT			cmd);
-
-
-#ifdef CONFIG_STA_SUPPORT
-INT rt28xx_sta_ioctl(
-	IN	struct net_device	*net_dev,
-	IN	OUT	struct ifreq	*rq,
-	IN	INT			cmd);
-#endif // CONFIG_STA_SUPPORT //
-
-BOOLEAN RT28XXSecurityKeyAdd(
-	IN		PRTMP_ADAPTER		pAd,
-	IN		ULONG				apidx,
-	IN		ULONG				KeyIdx,
-	IN		MAC_TABLE_ENTRY 	*pEntry);
-
-////////////////////////////////////////
-PNDIS_PACKET GetPacketFromRxRing(
-	IN		PRTMP_ADAPTER	pAd,
-	OUT		PRT28XX_RXD_STRUC	pSaveRxD,
-	OUT		BOOLEAN			*pbReschedule,
-	IN OUT	UINT32			*pRxPending);
-
-
-void kill_thread_task(PRTMP_ADAPTER pAd);
-
-void tbtt_tasklet(unsigned long data);
-
-
-VOID AsicTurnOffRFClk(
-	IN PRTMP_ADAPTER    pAd,
-	IN	UCHAR           Channel);
-
-VOID AsicTurnOnRFClk(
-	IN PRTMP_ADAPTER 	pAd,
-	IN	UCHAR			Channel);
-
-#ifdef RT30xx
-NTSTATUS RT30xxWriteRFRegister(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			RegID,
-	IN	UCHAR			Value);
-
-NTSTATUS RT30xxReadRFRegister(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			RegID,
-	IN	PUCHAR			pValue);
-
-//2008/09/11:KH add to support efuse<--
-UCHAR eFuseReadRegisters(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT Offset,
-	IN	USHORT Length,
-	OUT	USHORT* pData);
-
-VOID eFuseReadPhysical(
-	IN	PRTMP_ADAPTER	pAd,
-  	IN	PUSHORT lpInBuffer,
-  	IN	ULONG nInBufferSize,
-  	OUT	PUSHORT lpOutBuffer,
-  	IN	ULONG nOutBufferSize
-);
-
-NTSTATUS eFuseRead(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT			Offset,
-	OUT	PUCHAR			pData,
-	IN	USHORT			Length);
-
-VOID eFusePhysicalWriteRegisters(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT Offset,
-	IN	USHORT Length,
-	OUT	USHORT* pData);
-
-NTSTATUS eFuseWriteRegisters(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT Offset,
-	IN	USHORT Length,
-	IN	USHORT* pData);
-
-VOID eFuseWritePhysical(
-	IN	PRTMP_ADAPTER	pAd,
-  	PUSHORT lpInBuffer,
-	ULONG nInBufferSize,
-  	PUCHAR lpOutBuffer,
-  	ULONG nOutBufferSize
-);
-
-NTSTATUS eFuseWrite(
-   	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT			Offset,
-	IN	PUCHAR			pData,
-	IN	USHORT			length);
-
-INT set_eFuseGetFreeBlockCount_Proc(
-   	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT set_eFusedump_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT set_eFuseLoadFromBin_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-NTSTATUS eFuseWriteRegistersFromBin(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT Offset,
-	IN	USHORT Length,
-	IN	USHORT* pData);
-
-VOID eFusePhysicalReadRegisters(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT Offset,
-	IN	USHORT Length,
-	OUT	USHORT* pData);
-
-NDIS_STATUS NICLoadEEPROM(
-	IN PRTMP_ADAPTER pAd);
-
-BOOLEAN bNeedLoadEEPROM(
-	IN	PRTMP_ADAPTER	pAd);
-//2008/09/11:KH add to support efuse-->
-#endif // RT30xx //
-
-#ifdef RT30xx
-// add by johnli, RF power sequence setup
-VOID RT30xxLoadRFNormalModeSetup(
-	IN PRTMP_ADAPTER 	pAd);
-
-VOID RT30xxLoadRFSleepModeSetup(
-	IN PRTMP_ADAPTER 	pAd);
-
-VOID RT30xxReverseRFSleepModeSetup(
-	IN PRTMP_ADAPTER 	pAd);
-// end johnli
-#endif // RT30xx //
-
-#ifdef RT2870
-//
-// Function Prototype in rtusb_bulk.c
-//
-VOID	RTUSBInitTxDesc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PTX_CONTEXT		pTxContext,
-	IN	UCHAR			BulkOutPipeId,
-	IN	usb_complete_t	Func);
-
-VOID	RTUSBInitHTTxDesc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PHT_TX_CONTEXT	pTxContext,
-	IN	UCHAR			BulkOutPipeId,
-	IN	ULONG			BulkOutSize,
-	IN	usb_complete_t	Func);
-
-VOID	RTUSBInitRxDesc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PRX_CONTEXT		pRxContext);
-
-VOID RTUSBCleanUpDataBulkOutQueue(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID RTUSBCancelPendingBulkOutIRP(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID RTUSBBulkOutDataPacket(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			BulkOutPipeId,
-	IN	UCHAR			Index);
-
-VOID RTUSBBulkOutNullFrame(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID RTUSBBulkOutRTSFrame(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID RTUSBCancelPendingBulkInIRP(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID RTUSBCancelPendingIRPs(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID RTUSBBulkOutMLMEPacket(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			Index);
-
-VOID RTUSBBulkOutPsPoll(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID RTUSBCleanUpMLMEBulkOutQueue(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID RTUSBKickBulkOut(
-	IN	PRTMP_ADAPTER pAd);
-
-VOID	RTUSBBulkReceive(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID DoBulkIn(
-	IN RTMP_ADAPTER *pAd);
-
-VOID RTUSBInitRxDesc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN  PRX_CONTEXT		pRxContext);
-
-VOID RTUSBBulkRxHandle(
-	IN unsigned long data);
-
-//
-// Function Prototype in rtusb_io.c
-//
-NTSTATUS RTUSBMultiRead(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT			Offset,
-	OUT	PUCHAR			pData,
-	IN	USHORT			length);
-
-NTSTATUS RTUSBMultiWrite(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT			Offset,
-	IN	PUCHAR			pData,
-	IN	USHORT			length);
-
-NTSTATUS RTUSBMultiWrite_OneByte(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT			Offset,
-	IN	PUCHAR			pData);
-
-NTSTATUS RTUSBReadBBPRegister(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			Id,
-	IN	PUCHAR			pValue);
-
-NTSTATUS RTUSBWriteBBPRegister(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			Id,
-	IN	UCHAR			Value);
-
-NTSTATUS RTUSBWriteRFRegister(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UINT32			Value);
-
-NTSTATUS RTUSB_VendorRequest(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UINT32			TransferFlags,
-	IN	UCHAR			ReservedBits,
-	IN	UCHAR			Request,
-	IN	USHORT			Value,
-	IN	USHORT			Index,
-	IN	PVOID			TransferBuffer,
-	IN	UINT32			TransferBufferLength);
-
-NTSTATUS RTUSBReadEEPROM(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT			Offset,
-	OUT	PUCHAR			pData,
-	IN	USHORT			length);
-
-NTSTATUS RTUSBWriteEEPROM(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT			Offset,
-	IN	PUCHAR			pData,
-	IN	USHORT			length);
-
-VOID RTUSBPutToSleep(
-	IN	PRTMP_ADAPTER	pAd);
-
-NTSTATUS RTUSBWakeUp(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID RTUSBInitializeCmdQ(
-	IN	PCmdQ	cmdq);
-
-NDIS_STATUS	RTUSBEnqueueCmdFromNdis(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	NDIS_OID		Oid,
-	IN	BOOLEAN			SetInformation,
-	IN	PVOID			pInformationBuffer,
-	IN	UINT32			InformationBufferLength);
-
-NDIS_STATUS RTUSBEnqueueInternalCmd(
-	IN	PRTMP_ADAPTER	pAd,
-	IN NDIS_OID			Oid,
-	IN PVOID			pInformationBuffer,
-	IN UINT32			InformationBufferLength);
-
-VOID RTUSBDequeueCmd(
-	IN	PCmdQ		cmdq,
-	OUT	PCmdQElmt	*pcmdqelmt);
-
-INT RTUSBCmdThread(
-	IN OUT PVOID Context);
-
-INT TimerQThread(
-	IN OUT PVOID Context);
-
-RT2870_TIMER_ENTRY *RT2870_TimerQ_Insert(
-	IN RTMP_ADAPTER *pAd,
-	IN RALINK_TIMER_STRUCT *pTimer);
-
-BOOLEAN RT2870_TimerQ_Remove(
-	IN RTMP_ADAPTER *pAd,
-	IN RALINK_TIMER_STRUCT *pTimer);
-
-void RT2870_TimerQ_Exit(
-	IN RTMP_ADAPTER *pAd);
-
-void RT2870_TimerQ_Init(
-	IN RTMP_ADAPTER *pAd);
-
-VOID RT2870_BssBeaconExit(
-	IN RTMP_ADAPTER *pAd);
-
-VOID RT2870_BssBeaconStop(
-	IN RTMP_ADAPTER *pAd);
-
-VOID RT2870_BssBeaconStart(
-	IN RTMP_ADAPTER * pAd);
-
-VOID RT2870_BssBeaconInit(
-	IN RTMP_ADAPTER *pAd);
-
-VOID RT2870_WatchDog(
-	IN RTMP_ADAPTER *pAd);
-
-NTSTATUS RTUSBWriteMACRegister(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT			Offset,
-	IN	UINT32			Value);
-
-NTSTATUS RTUSBReadMACRegister(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	USHORT			Offset,
-	OUT	PUINT32			pValue);
-
-NTSTATUS RTUSBSingleWrite(
-	IN 	RTMP_ADAPTER 	*pAd,
-	IN	USHORT			Offset,
-	IN	USHORT			Value);
-
-NTSTATUS RTUSBFirmwareRun(
-	IN	PRTMP_ADAPTER	pAd);
-
-NTSTATUS RTUSBFirmwareWrite(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR		pFwImage,
-	IN ULONG		FwLen);
-
-NTSTATUS	RTUSBFirmwareOpmode(
-	IN	PRTMP_ADAPTER	pAd,
-	OUT	PUINT32			pValue);
-
-NTSTATUS	RTUSBVenderReset(
-	IN	PRTMP_ADAPTER	pAd);
-
-NDIS_STATUS RTUSBSetHardWareRegister(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	PVOID			pBuf);
-
-NDIS_STATUS RTUSBQueryHardWareRegister(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	PVOID			pBuf);
-
-VOID CMDHandler(
-    IN PRTMP_ADAPTER pAd);
-
-
-NDIS_STATUS	 CreateThreads(
-	IN	struct net_device *net_dev );
-
-
-VOID MacTableInitialize(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID MlmeSetPsm(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT psm);
-
-NDIS_STATUS RTMPWPAAddKeyProc(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PVOID           pBuf);
-
-VOID AsicRxAntEvalAction(
-	IN PRTMP_ADAPTER pAd);
-
-void append_pkt(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pHeader802_3,
-    IN  UINT            HdrLen,
-	IN	PUCHAR			pData,
-	IN	ULONG			DataSize,
-	OUT  PNDIS_PACKET	*ppPacket);
-
-UINT deaggregate_AMSDU_announce(
-	IN	PRTMP_ADAPTER	pAd,
-	PNDIS_PACKET		pPacket,
-	IN	PUCHAR			pData,
-	IN	ULONG			DataSize);
-
-NDIS_STATUS	RTMPCheckRxError(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PHEADER_802_11	pHeader,
-	IN	PRXWI_STRUC	pRxWI,
-	IN	PRT28XX_RXD_STRUC	pRxINFO);
-
-
-VOID RTUSBMlmeHardTransmit(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PMGMT_STRUC		pMgmt);
-
-INT MlmeThread(
-	IN PVOID Context);
-
-//
-// Function Prototype in rtusb_data.c
-//
-NDIS_STATUS	RTUSBFreeDescriptorRequest(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			BulkOutPipeId,
-	IN	UINT32			NumberRequired);
-
-
-BOOLEAN	RTUSBNeedQueueBackForAgg(
-	IN RTMP_ADAPTER *pAd,
-	IN UCHAR		BulkOutPipeId);
-
-
-VOID RTMPWriteTxInfo(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PTXINFO_STRUC 	pTxInfo,
-	IN	  USHORT		USBDMApktLen,
-	IN	  BOOLEAN		bWiv,
-	IN	  UCHAR			QueueSel,
-	IN	  UCHAR			NextValid,
-	IN	  UCHAR			TxBurst);
-
-//
-// Function Prototype in cmm_data_2870.c
-//
-USHORT RtmpUSB_WriteSubTxResource(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk,
-	IN	BOOLEAN			bIsLast,
-	OUT	USHORT			*FreeNumber);
-
-USHORT RtmpUSB_WriteSingleTxResource(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk,
-	IN	BOOLEAN			bIsLast,
-	OUT	USHORT			*FreeNumber);
-
-USHORT	RtmpUSB_WriteFragTxResource(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk,
-	IN	UCHAR			fragNum,
-	OUT	USHORT			*FreeNumber);
-
-USHORT RtmpUSB_WriteMultiTxResource(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk,
-	IN	UCHAR			frameNum,
-	OUT	USHORT			*FreeNumber);
-
-VOID RtmpUSB_FinalWriteTxResource(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk,
-	IN	USHORT			totalMPDUSize,
-	IN	USHORT			TxIdx);
-
-VOID RtmpUSBDataLastTxIdx(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			QueIdx,
-	IN	USHORT			TxIdx);
-
-VOID RtmpUSBDataKickOut(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk,
-	IN	UCHAR			QueIdx);
-
-
-int RtmpUSBMgmtKickOut(
-	IN RTMP_ADAPTER 	*pAd,
-	IN UCHAR 			QueIdx,
-	IN PNDIS_PACKET		pPacket,
-	IN PUCHAR			pSrcBufVA,
-	IN UINT 			SrcBufLen);
-
-VOID RtmpUSBNullFrameKickOut(
-	IN RTMP_ADAPTER *pAd,
-	IN UCHAR		QueIdx,
-	IN UCHAR		*pNullFrame,
-	IN UINT32		frameLen);
-
-VOID RT28xxUsbStaAsicForceWakeup(
-	IN PRTMP_ADAPTER pAd,
-	IN BOOLEAN       bFromTx);
-
-VOID RT28xxUsbStaAsicSleepThenAutoWakeup(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT TbttNumToNextWakeUp);
-
-VOID RT28xxUsbMlmeRadioOn(
-	IN PRTMP_ADAPTER pAd);
-
-VOID RT28xxUsbMlmeRadioOFF(
-	IN PRTMP_ADAPTER pAd);
-#endif // RT2870 //
-
-////////////////////////////////////////
-
-VOID QBSS_LoadInit(
- 	IN		RTMP_ADAPTER	*pAd);
-
-UINT32 QBSS_LoadElementAppend(
- 	IN		RTMP_ADAPTER	*pAd,
-	OUT		UINT8			*buf_p);
-
-VOID QBSS_LoadUpdate(
- 	IN		RTMP_ADAPTER	*pAd);
-
-///////////////////////////////////////
-INT RTMPShowCfgValue(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pName,
-	IN	PUCHAR			pBuf);
-
-PCHAR   RTMPGetRalinkAuthModeStr(
-    IN  NDIS_802_11_AUTHENTICATION_MODE authMode);
-
-PCHAR   RTMPGetRalinkEncryModeStr(
-    IN  USHORT encryMode);
-//////////////////////////////////////
-
-#ifdef CONFIG_STA_SUPPORT
-VOID AsicStaBbpTuning(
-	IN PRTMP_ADAPTER pAd);
-
-BOOLEAN StaAddMacTableEntry(
-	IN  PRTMP_ADAPTER		pAd,
-	IN  PMAC_TABLE_ENTRY	pEntry,
-	IN  UCHAR				MaxSupportedRateIn500Kbps,
-	IN  HT_CAPABILITY_IE	*pHtCapability,
-	IN  UCHAR				HtCapabilityLen,
-	IN  USHORT        		CapabilityInfo);
-#endif // CONFIG_STA_SUPPORT //
-
-void RTMP_IndicateMediaState(
-	IN	PRTMP_ADAPTER	pAd);
-
-VOID ReSyncBeaconTime(
-	IN  PRTMP_ADAPTER   pAd);
-
-VOID RTMPSetAGCInitValue(
-	IN PRTMP_ADAPTER	pAd,
-	IN UCHAR			BandWidth);
-
-int rt28xx_close(IN PNET_DEV dev);
-int rt28xx_open(IN PNET_DEV dev);
-
-__inline INT VIRTUAL_IF_UP(PRTMP_ADAPTER pAd)
-{
-extern VOID MeshMakeBeacon(IN PRTMP_ADAPTER pAd, IN UCHAR idx);
-extern VOID MeshUpdateBeaconFrame(IN PRTMP_ADAPTER pAd, IN UCHAR idx);
-
-	if (VIRTUAL_IF_NUM(pAd) == 0)
-	{
-		if (rt28xx_open(pAd->net_dev) != 0)
-			return -1;
-	}
-	else
-	{
-	}
-	VIRTUAL_IF_INC(pAd);
-	return 0;
-}
-
-__inline VOID VIRTUAL_IF_DOWN(PRTMP_ADAPTER pAd)
-{
-	VIRTUAL_IF_DEC(pAd);
-	if (VIRTUAL_IF_NUM(pAd) == 0)
-		rt28xx_close(pAd->net_dev);
-	return;
-}
-
-
-#endif  // __RTMP_H__
-
+#include "../rt2870/rtmp.h"
diff --git a/drivers/staging/rt3070/rtmp_ckipmic.h b/drivers/staging/rt3070/rtmp_ckipmic.h
index a3d949a39d3..4956093f475 100644
--- a/drivers/staging/rt3070/rtmp_ckipmic.h
+++ b/drivers/staging/rt3070/rtmp_ckipmic.h
@@ -1,113 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	rtmp_ckipmic.h
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Name		Date			Modification logs
-*/
-#ifndef	__RTMP_CKIPMIC_H__
-#define	__RTMP_CKIPMIC_H__
-
-typedef	struct	_MIC_CONTEXT	{
-	/* --- MMH context                            */
-	UCHAR		CK[16];				/* the key                                    */
-	UCHAR		coefficient[16];	/* current aes counter mode coefficients      */
-	ULONGLONG	accum;				/* accumulated mic, reduced to u32 in final() */
-	UINT		position;			/* current position (byte offset) in message  */
-	UCHAR		part[4];			/* for conversion of message to u32 for mmh   */
-}	MIC_CONTEXT, *PMIC_CONTEXT;
-
-VOID	CKIP_key_permute(
-	OUT	UCHAR	*PK,			/* output permuted key */
-	IN	UCHAR	*CK,			/* input CKIP key */
-	IN	UCHAR	toDsFromDs,		/* input toDs/FromDs bits */
-	IN	UCHAR	*piv);			/* input pointer to IV */
-
-VOID	RTMPCkipMicInit(
-	IN	PMIC_CONTEXT		pContext,
-	IN	PUCHAR				CK);
-
-VOID RTMPMicUpdate(
-    IN  PMIC_CONTEXT        pContext,
-    IN  PUCHAR              pOctets,
-    IN  INT                 len);
-
-ULONG RTMPMicGetCoefficient(
-    IN  PMIC_CONTEXT         pContext);
-
-VOID xor_128(
-    IN  PUCHAR              a,
-    IN  PUCHAR              b,
-    OUT PUCHAR              out);
-
-UCHAR RTMPCkipSbox(
-    IN  UCHAR               a);
-
-VOID xor_32(
-    IN  PUCHAR              a,
-    IN  PUCHAR              b,
-    OUT PUCHAR              out);
-
-VOID next_key(
-    IN  PUCHAR              key,
-    IN  INT                 round);
-
-VOID byte_sub(
-    IN  PUCHAR              in,
-    OUT PUCHAR              out);
-
-VOID shift_row(
-    IN  PUCHAR              in,
-    OUT PUCHAR              out);
-
-VOID mix_column(
-    IN  PUCHAR              in,
-    OUT PUCHAR              out);
-
-VOID RTMPAesEncrypt(
-    IN  PUCHAR              key,
-    IN  PUCHAR              data,
-    IN  PUCHAR              ciphertext);
-
-VOID RTMPMicFinal(
-    IN  PMIC_CONTEXT        pContext,
-    OUT UCHAR               digest[4]);
-
-VOID RTMPCkipInsertCMIC(
-    IN  PRTMP_ADAPTER   pAd,
-    OUT PUCHAR          pMIC,
-    IN  PUCHAR          p80211hdr,
-    IN  PNDIS_PACKET    pPacket,
-    IN  PCIPHER_KEY     pKey,
-    IN  PUCHAR          mic_snap);
-
-#endif //__RTMP_CKIPMIC_H__
+#include "../rt2870/rtmp_ckipmic.h"
diff --git a/drivers/staging/rt3070/rtmp_def.h b/drivers/staging/rt3070/rtmp_def.h
index 2599f7c836e..fa3b6b55cfe 100644
--- a/drivers/staging/rt3070/rtmp_def.h
+++ b/drivers/staging/rt3070/rtmp_def.h
@@ -1,1559 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-    rtmp_def.h
-
-    Abstract:
-    Miniport related definition header
-
-    Revision History:
-    Who         When          What
-    --------    ----------    ----------------------------------------------
-    Paul Lin    08-01-2002    created
-    John Chang  08-05-2003    add definition for 11g & other drafts
-*/
-#ifndef __RTMP_DEF_H__
-#define __RTMP_DEF_H__
-
-#include "oid.h"
-
-#undef AP_WSC_INCLUDED
-#undef STA_WSC_INCLUDED
-#undef WSC_INCLUDED
-
-
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-
-#if defined(AP_WSC_INCLUDED) || defined(STA_WSC_INCLUDED)
-#define WSC_INCLUDED
-#endif
-//
-//  Debug information verbosity: lower values indicate higher urgency
-//
-#define RT_DEBUG_OFF        0
-#define RT_DEBUG_ERROR      1
-#define RT_DEBUG_WARN       2
-#define RT_DEBUG_TRACE      3
-#define RT_DEBUG_INFO       4
-#define RT_DEBUG_LOUD       5
-
-#define NIC_TAG             ((ULONG)'0682')
-#define NIC_DBG_STRING      ("**RT28xx**")
-
-#ifdef SNMP_SUPPORT
-// for snmp
-// to get manufacturer OUI, kathy, 2008_0220
-#define ManufacturerOUI_LEN			3
-#define ManufacturerNAME			("Ralink Technology Company.")
-#define	ResourceTypeIdName			("Ralink_ID")
-#endif
-
-
-//#define PACKED
-
-#define RALINK_2883_VERSION		((UINT32)0x28830300)
-#define RALINK_2880E_VERSION	((UINT32)0x28720200)
-#define RALINK_3070_VERSION		((UINT32)0x30700200)
-
-//
-// NDIS version in use by the NIC driver.
-// The high byte is the major version. The low byte is the minor version.
-//
-#ifdef  NDIS51_MINIPORT
-#define NIC_DRIVER_VERSION      0x0501
-#else
-#define NIC_DRIVER_VERSION      0x0500
-#endif
-
-//
-// NDIS media type, current is ethernet, change if native wireless supported
-//
-#define NIC_MEDIA_TYPE          NdisMedium802_3
-#define NIC_PCI_HDR_LENGTH      0xe2
-#define NIC_MAX_PACKET_SIZE     2304
-#define NIC_HEADER_SIZE         14
-#define MAX_MAP_REGISTERS_NEEDED 32
-#define MIN_MAP_REGISTERS_NEEDED 2   //Todo: should consider fragment issue.
-
-//
-// interface type, we use PCI
-//
-#define NIC_INTERFACE_TYPE      NdisInterfacePci
-#define NIC_INTERRUPT_MODE      NdisInterruptLevelSensitive
-
-//
-// buffer size passed in NdisMQueryAdapterResources
-// We should only need three adapter resources (IO, interrupt and memory),
-// Some devices get extra resources, so have room for 10 resources
-//                    UF_SIZE   (sizeof(NDIS_RESOURCE_LIST) + (10*sizeof(CM_PARTIAL_RESOURCE_DESCRIPTOR)))
-
-
-#define NIC_RESOURCE_B//
-// IO space length
-//
-#define NIC_MAP_IOSPACE_LENGTH  sizeof(CSR_STRUC)
-
-#define MAX_RX_PKT_LEN	1520
-
-//
-// Entry number for each DMA descriptor ring
-//
-
-
-#ifdef RT2870
-#define TX_RING_SIZE            8 // 1
-#define PRIO_RING_SIZE          8
-#define MGMT_RING_SIZE       32 // PRIO_RING_SIZE
-#define RX_RING_SIZE            8
-#define MAX_TX_PROCESS          4
-#define LOCAL_TXBUF_SIZE        2048
-#endif // RT2870 //
-
-#ifdef MULTIPLE_CARD_SUPPORT
-// MC: Multple Cards
-#define MAX_NUM_OF_MULTIPLE_CARD		32
-#endif // MULTIPLE_CARD_SUPPORT //
-
-#define MAX_RX_PROCESS          128 //64 //32
-#define NUM_OF_LOCAL_TXBUF      2
-#define TXD_SIZE                16
-#define TXWI_SIZE               16
-#define RXD_SIZE               	16
-#define RXWI_SIZE             	16
-// TXINFO_SIZE + TXWI_SIZE + 802.11 Header Size + AMSDU sub frame header
-#define TX_DMA_1ST_BUFFER_SIZE  96    // only the 1st physical buffer is pre-allocated
-#define MGMT_DMA_BUFFER_SIZE    1536 //2048
-#define RX_BUFFER_AGGRESIZE     3840 //3904 //3968 //4096 //2048 //4096
-#define RX_BUFFER_NORMSIZE      3840 //3904 //3968 //4096 //2048 //4096
-#define TX_BUFFER_NORMSIZE		RX_BUFFER_NORMSIZE
-#define MAX_FRAME_SIZE          2346                    // Maximum 802.11 frame size
-#define MAX_AGGREGATION_SIZE    3840 //3904 //3968 //4096
-#define MAX_NUM_OF_TUPLE_CACHE  2
-#define MAX_MCAST_LIST_SIZE     32
-#define MAX_LEN_OF_VENDOR_DESC  64
-//#define MAX_SIZE_OF_MCAST_PSQ   (NUM_OF_LOCAL_TXBUF >> 2) // AP won't spend more than 1/4 of total buffers on M/BCAST PSQ
-#define MAX_SIZE_OF_MCAST_PSQ               32
-
-#define MAX_RX_PROCESS_CNT	(RX_RING_SIZE)
-
-
-#define MAX_PACKETS_IN_QUEUE				(512) //(512)    // to pass WMM A5-WPAPSK
-#define MAX_PACKETS_IN_MCAST_PS_QUEUE		32
-#define MAX_PACKETS_IN_PS_QUEUE				128	//32
-#define WMM_NUM_OF_AC                       4  /* AC0, AC1, AC2, and AC3 */
-
-
-//2008/09/11:KH add to support efuse<--
-#define MAX_EEPROM_BIN_FILE_SIZE					1024
-//2008/09/11:KH add to support efuse-->
-
-// RxFilter
-#define STANORMAL	 0x17f97
-#define APNORMAL	 0x15f97
-//
-//  RTMP_ADAPTER flags
-//
-#define fRTMP_ADAPTER_MAP_REGISTER          0x00000001
-#define fRTMP_ADAPTER_INTERRUPT_IN_USE      0x00000002
-#define fRTMP_ADAPTER_HARDWARE_ERROR        0x00000004
-#define fRTMP_ADAPTER_SCATTER_GATHER        0x00000008
-#define fRTMP_ADAPTER_SEND_PACKET_ERROR     0x00000010
-#define fRTMP_ADAPTER_MLME_RESET_IN_PROGRESS 0x00000020
-#define fRTMP_ADAPTER_HALT_IN_PROGRESS      0x00000040
-#define fRTMP_ADAPTER_RESET_IN_PROGRESS     0x00000080
-#define fRTMP_ADAPTER_NIC_NOT_EXIST         0x00000100
-#define fRTMP_ADAPTER_TX_RING_ALLOCATED     0x00000200
-#define fRTMP_ADAPTER_REMOVE_IN_PROGRESS    0x00000400
-#define fRTMP_ADAPTER_MIMORATE_INUSED       0x00000800
-#define fRTMP_ADAPTER_RX_RING_ALLOCATED     0x00001000
-#define fRTMP_ADAPTER_INTERRUPT_ACTIVE      0x00002000
-#define fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS  0x00004000
-#define	fRTMP_ADAPTER_REASSOC_IN_PROGRESS	0x00008000
-#define	fRTMP_ADAPTER_MEDIA_STATE_PENDING	0x00010000
-#define	fRTMP_ADAPTER_RADIO_OFF				0x00020000
-#define fRTMP_ADAPTER_BULKOUT_RESET			0x00040000
-#define	fRTMP_ADAPTER_BULKIN_RESET			0x00080000
-#define fRTMP_ADAPTER_RDG_ACTIVE			0x00100000
-#define fRTMP_ADAPTER_DYNAMIC_BE_TXOP_ACTIVE 0x00200000
-#define fRTMP_ADAPTER_SCAN_2040 			0x04000000
-#define	fRTMP_ADAPTER_RADIO_MEASUREMENT		0x08000000
-
-#define fRTMP_ADAPTER_START_UP         		0x10000000	//Devive already initialized and enabled Tx/Rx.
-#define fRTMP_ADAPTER_MEDIA_STATE_CHANGE    0x20000000
-#define fRTMP_ADAPTER_IDLE_RADIO_OFF        0x40000000
-
-// Lock bit for accessing different ring buffers
-//#define fRTMP_ADAPTER_TX_RING_BUSY        0x80000000
-//#define fRTMP_ADAPTER_MGMT_RING_BUSY      0x40000000
-//#define fRTMP_ADAPTER_ATIM_RING_BUSY      0x20000000
-//#define fRTMP_ADAPTER_RX_RING_BUSY        0x10000000
-
-// Lock bit for accessing different queue
-//#define   fRTMP_ADAPTER_TX_QUEUE_BUSY     0x08000000
-//#define   fRTMP_ADAPTER_MGMT_QUEUE_BUSY   0x04000000
-
-//
-//  STA operation status flags
-//
-#define fOP_STATUS_INFRA_ON                 0x00000001
-#define fOP_STATUS_ADHOC_ON                 0x00000002
-#define fOP_STATUS_BG_PROTECTION_INUSED     0x00000004
-#define fOP_STATUS_SHORT_SLOT_INUSED        0x00000008
-#define fOP_STATUS_SHORT_PREAMBLE_INUSED    0x00000010
-#define fOP_STATUS_RECEIVE_DTIM             0x00000020
-//#define fOP_STATUS_TX_RATE_SWITCH_ENABLED   0x00000040
-#define fOP_STATUS_MEDIA_STATE_CONNECTED    0x00000080
-#define fOP_STATUS_WMM_INUSED               0x00000100
-#define fOP_STATUS_AGGREGATION_INUSED       0x00000200
-#define fOP_STATUS_DOZE                     0x00000400  // debug purpose
-#define fOP_STATUS_PIGGYBACK_INUSED         0x00000800  // piggy-back, and aggregation
-#define fOP_STATUS_APSD_INUSED				0x00001000
-#define fOP_STATUS_TX_AMSDU_INUSED			0x00002000
-#define fOP_STATUS_MAX_RETRY_ENABLED		0x00004000
-#define fOP_STATUS_WAKEUP_NOW               0x00008000
-#define fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE       0x00020000
-
-#ifdef DOT11N_DRAFT3
-#define fOP_STATUS_SCAN_2040               	    0x00040000
-#endif // DOT11N_DRAFT3 //
-
-#define CCKSETPROTECT		0x1
-#define OFDMSETPROTECT		0x2
-#define MM20SETPROTECT		0x4
-#define MM40SETPROTECT		0x8
-#define GF20SETPROTECT		0x10
-#define GR40SETPROTECT		0x20
-#define ALLN_SETPROTECT		(GR40SETPROTECT | GF20SETPROTECT | MM40SETPROTECT | MM20SETPROTECT)
-
-//
-//  AP's client table operation status flags
-//
-#define fCLIENT_STATUS_WMM_CAPABLE          0x00000001  // CLIENT can parse QOS DATA frame
-#define fCLIENT_STATUS_AGGREGATION_CAPABLE  0x00000002  // CLIENT can receive Ralink's proprietary TX aggregation frame
-#define fCLIENT_STATUS_PIGGYBACK_CAPABLE    0x00000004  // CLIENT support piggy-back
-#define fCLIENT_STATUS_AMSDU_INUSED			0x00000008
-#define fCLIENT_STATUS_SGI20_CAPABLE		0x00000010
-#define fCLIENT_STATUS_SGI40_CAPABLE		0x00000020
-#define fCLIENT_STATUS_TxSTBC_CAPABLE		0x00000040
-#define fCLIENT_STATUS_RxSTBC_CAPABLE		0x00000080
-#define fCLIENT_STATUS_HTC_CAPABLE			0x00000100
-#define fCLIENT_STATUS_RDG_CAPABLE			0x00000200
-#define fCLIENT_STATUS_MCSFEEDBACK_CAPABLE  0x00000400
-#define fCLIENT_STATUS_APSD_CAPABLE         0x00000800  /* UAPSD STATION */
-
-#ifdef DOT11N_DRAFT3
-#define fCLIENT_STATUS_BSSCOEXIST_CAPABLE	0x00001000
-#endif // DOT11N_DRAFT3 //
-
-#define fCLIENT_STATUS_RALINK_CHIPSET		0x00100000
-//
-//  STA configuration flags
-//
-//#define fSTA_CFG_ENABLE_TX_BURST          0x00000001
-
-// 802.11n Operating Mode Definition. 0-3 also used in ASICUPdateProtect switch case
-#define HT_NO_PROTECT	0
-#define HT_LEGACY_PROTECT	1
-#define HT_40_PROTECT	2
-#define HT_2040_PROTECT	3
-#define HT_RTSCTS_6M	7
-//following is our own definition in order to turn on our ASIC protection register in INFRASTRUCTURE.
-#define HT_ATHEROS	8
-#define HT_FORCERTSCTS	9	// Force turn on RTS/CTS first. then go to evaluate if this force RTS is necessary.
-
-//
-// RX Packet Filter control flags. Apply on pAd->PacketFilter
-//
-#define fRX_FILTER_ACCEPT_DIRECT            NDIS_PACKET_TYPE_DIRECTED
-#define fRX_FILTER_ACCEPT_MULTICAST         NDIS_PACKET_TYPE_MULTICAST
-#define fRX_FILTER_ACCEPT_BROADCAST         NDIS_PACKET_TYPE_BROADCAST
-#define fRX_FILTER_ACCEPT_ALL_MULTICAST     NDIS_PACKET_TYPE_ALL_MULTICAST
-
-//
-// Error code section
-//
-// NDIS_ERROR_CODE_ADAPTER_NOT_FOUND
-#define ERRLOG_READ_PCI_SLOT_FAILED     0x00000101L
-#define ERRLOG_WRITE_PCI_SLOT_FAILED    0x00000102L
-#define ERRLOG_VENDOR_DEVICE_NOMATCH    0x00000103L
-
-// NDIS_ERROR_CODE_ADAPTER_DISABLED
-#define ERRLOG_BUS_MASTER_DISABLED      0x00000201L
-
-// NDIS_ERROR_CODE_UNSUPPORTED_CONFIGURATION
-#define ERRLOG_INVALID_SPEED_DUPLEX     0x00000301L
-#define ERRLOG_SET_SECONDARY_FAILED     0x00000302L
-
-// NDIS_ERROR_CODE_OUT_OF_RESOURCES
-#define ERRLOG_OUT_OF_MEMORY            0x00000401L
-#define ERRLOG_OUT_OF_SHARED_MEMORY     0x00000402L
-#define ERRLOG_OUT_OF_MAP_REGISTERS     0x00000403L
-#define ERRLOG_OUT_OF_BUFFER_POOL       0x00000404L
-#define ERRLOG_OUT_OF_NDIS_BUFFER       0x00000405L
-#define ERRLOG_OUT_OF_PACKET_POOL       0x00000406L
-#define ERRLOG_OUT_OF_NDIS_PACKET       0x00000407L
-#define ERRLOG_OUT_OF_LOOKASIDE_MEMORY  0x00000408L
-
-// NDIS_ERROR_CODE_HARDWARE_FAILURE
-#define ERRLOG_SELFTEST_FAILED          0x00000501L
-#define ERRLOG_INITIALIZE_ADAPTER       0x00000502L
-#define ERRLOG_REMOVE_MINIPORT          0x00000503L
-
-// NDIS_ERROR_CODE_RESOURCE_CONFLICT
-#define ERRLOG_MAP_IO_SPACE             0x00000601L
-#define ERRLOG_QUERY_ADAPTER_RESOURCES  0x00000602L
-#define ERRLOG_NO_IO_RESOURCE           0x00000603L
-#define ERRLOG_NO_INTERRUPT_RESOURCE    0x00000604L
-#define ERRLOG_NO_MEMORY_RESOURCE       0x00000605L
-
-
-// WDS definition
-#define	MAX_WDS_ENTRY               4
-#define WDS_PAIRWISE_KEY_OFFSET     60    // WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table
-
-#define	WDS_DISABLE_MODE            0
-#define	WDS_RESTRICT_MODE           1
-#define	WDS_BRIDGE_MODE             2
-#define	WDS_REPEATER_MODE           3
-#define	WDS_LAZY_MODE               4
-
-
-#define MAX_MESH_NUM				0
-
-#define MAX_APCLI_NUM				0
-
-#define MAX_MBSSID_NUM				1
-#ifdef MBSS_SUPPORT
-#undef	MAX_MBSSID_NUM
-#define MAX_MBSSID_NUM				(8 - MAX_MESH_NUM - MAX_APCLI_NUM)
-#endif // MBSS_SUPPORT //
-
-/* sanity check for apidx */
-#define MBSS_MR_APIDX_SANITY_CHECK(apidx) \
-    { if (apidx > MAX_MBSSID_NUM) { \
-          printk("%s> Error! apidx = %d > MAX_MBSSID_NUM!\n", __FUNCTION__, apidx); \
-	  apidx = MAIN_MBSSID; } }
-
-#define VALID_WCID(_wcid)	((_wcid) > 0 && (_wcid) < MAX_LEN_OF_MAC_TABLE )
-
-#define MAIN_MBSSID                 0
-#define FIRST_MBSSID                1
-
-
-#define MAX_BEACON_SIZE				512
-// If the MAX_MBSSID_NUM is larger than 6,
-// it shall reserve some WCID space(wcid 222~253) for beacon frames.
-// -	these wcid 238~253 are reserved for beacon#6(ra6).
-// -	these wcid 222~237 are reserved for beacon#7(ra7).
-#if defined(MAX_MBSSID_NUM) && (MAX_MBSSID_NUM == 8)
-#define HW_RESERVED_WCID	222
-#elif defined(MAX_MBSSID_NUM) && (MAX_MBSSID_NUM == 7)
-#define HW_RESERVED_WCID	238
-#else
-#define HW_RESERVED_WCID	255
-#endif
-
-// Then dedicate wcid of DFS and Carrier-Sense.
-#define DFS_CTS_WCID 		(HW_RESERVED_WCID - 1)
-#define CS_CTS_WCID 		(HW_RESERVED_WCID - 2)
-#define LAST_SPECIFIC_WCID	(HW_RESERVED_WCID - 2)
-
-// If MAX_MBSSID_NUM is 8, the maximum available wcid for the associated STA is 211.
-// If MAX_MBSSID_NUM is 7, the maximum available wcid for the associated STA is 228.
-#define MAX_AVAILABLE_CLIENT_WCID	(LAST_SPECIFIC_WCID - MAX_MBSSID_NUM - 1)
-
-// TX need WCID to find Cipher Key
-// these wcid 212 ~ 219 are reserved for bc/mc packets if MAX_MBSSID_NUM is 8.
-#define GET_GroupKey_WCID(__wcid, __bssidx) \
-	{										\
-		__wcid = LAST_SPECIFIC_WCID - (MAX_MBSSID_NUM) + __bssidx;	\
-	}
-
-#define IsGroupKeyWCID(__wcid) (((__wcid) < LAST_SPECIFIC_WCID) && ((__wcid) >= (LAST_SPECIFIC_WCID - (MAX_MBSSID_NUM))))
-
-
-// definition to support multiple BSSID
-#define BSS0                            0
-#define BSS1                            1
-#define BSS2                            2
-#define BSS3                            3
-#define BSS4                            4
-#define BSS5                            5
-#define BSS6                            6
-#define BSS7                            7
-
-
-//============================================================
-// Length definitions
-#define PEER_KEY_NO                     2
-#define MAC_ADDR_LEN                    6
-#define TIMESTAMP_LEN                   8
-#define MAX_LEN_OF_SUPPORTED_RATES      MAX_LENGTH_OF_SUPPORT_RATES // 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
-#define MAX_LEN_OF_KEY                  32      // 32 octets == 256 bits, Redefine for WPA
-#define MAX_NUM_OF_CHANNELS             MAX_NUM_OF_CHS      // 14 channels @2.4G +  12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination
-#define MAX_NUM_OF_11JCHANNELS             20      // 14 channels @2.4G +  12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination
-#define MAX_LEN_OF_SSID                 32
-#define CIPHER_TEXT_LEN                 128
-#define HASH_TABLE_SIZE                 256
-#define MAX_VIE_LEN                     1024   // New for WPA cipher suite variable IE sizes.
-#define MAX_SUPPORT_MCS             32
-
-//============================================================
-// ASIC WCID Table definition.
-//============================================================
-#define BSSID_WCID		1	// in infra mode, always put bssid with this WCID
-#define MCAST_WCID	0x0
-#define BSS0Mcast_WCID	0x0
-#define BSS1Mcast_WCID	0xf8
-#define BSS2Mcast_WCID	0xf9
-#define BSS3Mcast_WCID	0xfa
-#define BSS4Mcast_WCID	0xfb
-#define BSS5Mcast_WCID	0xfc
-#define BSS6Mcast_WCID	0xfd
-#define BSS7Mcast_WCID	0xfe
-#define RESERVED_WCID		0xff
-
-#define MAX_NUM_OF_ACL_LIST				MAX_NUMBER_OF_ACL
-
-#define MAX_LEN_OF_MAC_TABLE            MAX_NUMBER_OF_MAC // if MAX_MBSSID_NUM is 8, this value can't be larger than 211
-
-#if MAX_LEN_OF_MAC_TABLE>MAX_AVAILABLE_CLIENT_WCID
-#error MAX_LEN_OF_MAC_TABLE can not be larger than MAX_AVAILABLE_CLIENT_WCID!!!!
-#endif
-
-#define MAX_NUM_OF_WDS_LINK_PERBSSID	            3
-#define MAX_NUM_OF_WDS_LINK	            (MAX_NUM_OF_WDS_LINK_PERBSSID*MAX_MBSSID_NUM)
-#define MAX_NUM_OF_EVENT                MAX_NUMBER_OF_EVENT
-#define WDS_LINK_START_WCID				(MAX_LEN_OF_MAC_TABLE-1)
-
-#define NUM_OF_TID			8
-#define MAX_AID_BA                    4
-#define MAX_LEN_OF_BA_REC_TABLE          ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2)//   (NUM_OF_TID*MAX_AID_BA + 32)	 //Block ACK recipient
-#define MAX_LEN_OF_BA_ORI_TABLE          ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2)//   (NUM_OF_TID*MAX_AID_BA + 32)   // Block ACK originator
-#define MAX_LEN_OF_BSS_TABLE             64
-#define MAX_REORDERING_MPDU_NUM			 512
-
-// key related definitions
-#define SHARE_KEY_NUM                   4
-#define MAX_LEN_OF_SHARE_KEY            16    // byte count
-#define MAX_LEN_OF_PEER_KEY             16    // byte count
-#define PAIRWISE_KEY_NUM                64    // in MAC ASIC pairwise key table
-#define GROUP_KEY_NUM                   4
-#define PMK_LEN                         32
-#define WDS_PAIRWISE_KEY_OFFSET         60    // WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table
-#define	PMKID_NO                        4     // Number of PMKID saved supported
-#define MAX_LEN_OF_MLME_BUFFER          2048
-
-// power status related definitions
-#define PWR_ACTIVE                      0
-#define PWR_SAVE                        1
-#define PWR_MMPS                        2			//MIMO power save
-//#define PWR_UNKNOWN                   2
-
-// Auth and Assoc mode related definitions
-#define AUTH_MODE_OPEN                  0x00
-#define AUTH_MODE_KEY                   0x01
-//#define AUTH_MODE_AUTO_SWITCH         0x03
-//#define AUTH_MODE_DEAUTH              0x04
-//#define AUTH_MODE_UPLAYER             0x05 // reserved for 802.11i use
-
-// BSS Type definitions
-#define BSS_ADHOC                       0  // = Ndis802_11IBSS
-#define BSS_INFRA                       1  // = Ndis802_11Infrastructure
-#define BSS_ANY                         2  // = Ndis802_11AutoUnknown
-#define BSS_MONITOR			            3  // = Ndis802_11Monitor
-
-
-// Reason code definitions
-#define REASON_RESERVED                 0
-#define REASON_UNSPECIFY                1
-#define REASON_NO_LONGER_VALID          2
-#define REASON_DEAUTH_STA_LEAVING       3
-#define REASON_DISASSOC_INACTIVE        4
-#define REASON_DISASSPC_AP_UNABLE       5
-#define REASON_CLS2ERR                  6
-#define REASON_CLS3ERR                  7
-#define REASON_DISASSOC_STA_LEAVING     8
-#define REASON_STA_REQ_ASSOC_NOT_AUTH   9
-#define REASON_INVALID_IE               13
-#define REASON_MIC_FAILURE              14
-#define REASON_4_WAY_TIMEOUT            15
-#define REASON_GROUP_KEY_HS_TIMEOUT     16
-#define REASON_IE_DIFFERENT             17
-#define REASON_MCIPHER_NOT_VALID        18
-#define REASON_UCIPHER_NOT_VALID        19
-#define REASON_AKMP_NOT_VALID           20
-#define REASON_UNSUPPORT_RSNE_VER       21
-#define REASON_INVALID_RSNE_CAP         22
-#define REASON_8021X_AUTH_FAIL          23
-#define REASON_CIPHER_SUITE_REJECTED    24
-#define REASON_DECLINED                 37
-
-#define REASON_QOS_UNSPECIFY              32
-#define REASON_QOS_LACK_BANDWIDTH         33
-#define REASON_POOR_CHANNEL_CONDITION     34
-#define REASON_QOS_OUTSIDE_TXOP_LIMITION  35
-#define REASON_QOS_QSTA_LEAVING_QBSS      36
-#define REASON_QOS_UNWANTED_MECHANISM     37
-#define REASON_QOS_MECH_SETUP_REQUIRED    38
-#define REASON_QOS_REQUEST_TIMEOUT        39
-#define REASON_QOS_CIPHER_NOT_SUPPORT     45
-
-// Status code definitions
-#define MLME_SUCCESS                    0
-#define MLME_UNSPECIFY_FAIL             1
-#define MLME_CANNOT_SUPPORT_CAP         10
-#define MLME_REASSOC_DENY_ASSOC_EXIST   11
-#define MLME_ASSOC_DENY_OUT_SCOPE       12
-#define MLME_ALG_NOT_SUPPORT            13
-#define MLME_SEQ_NR_OUT_OF_SEQUENCE     14
-#define MLME_REJ_CHALLENGE_FAILURE      15
-#define MLME_REJ_TIMEOUT                  16
-#define MLME_ASSOC_REJ_UNABLE_HANDLE_STA  17
-#define MLME_ASSOC_REJ_DATA_RATE          18
-
-#define MLME_ASSOC_REJ_NO_EXT_RATE        22
-#define MLME_ASSOC_REJ_NO_EXT_RATE_PBCC   23
-#define MLME_ASSOC_REJ_NO_CCK_OFDM        24
-
-#define MLME_QOS_UNSPECIFY                32
-#define MLME_REQUEST_DECLINED             37
-#define MLME_REQUEST_WITH_INVALID_PARAM   38
-#define MLME_DLS_NOT_ALLOW_IN_QBSS        48
-#define MLME_DEST_STA_NOT_IN_QBSS         49
-#define MLME_DEST_STA_IS_NOT_A_QSTA       50
-
-#define MLME_INVALID_FORMAT             0x51
-#define MLME_FAIL_NO_RESOURCE           0x52
-#define MLME_STATE_MACHINE_REJECT       0x53
-#define MLME_MAC_TABLE_FAIL             0x54
-
-// IE code
-#define IE_SSID                         0
-#define IE_SUPP_RATES                   1
-#define IE_FH_PARM                      2
-#define IE_DS_PARM                      3
-#define IE_CF_PARM                      4
-#define IE_TIM                          5
-#define IE_IBSS_PARM                    6
-#define IE_COUNTRY                      7     // 802.11d
-#define IE_802_11D_REQUEST              10    // 802.11d
-#define IE_QBSS_LOAD                    11    // 802.11e d9
-#define IE_EDCA_PARAMETER               12    // 802.11e d9
-#define IE_TSPEC                        13    // 802.11e d9
-#define IE_TCLAS                        14    // 802.11e d9
-#define IE_SCHEDULE                     15    // 802.11e d9
-#define IE_CHALLENGE_TEXT               16
-#define IE_POWER_CONSTRAINT             32    // 802.11h d3.3
-#define IE_POWER_CAPABILITY             33    // 802.11h d3.3
-#define IE_TPC_REQUEST                  34    // 802.11h d3.3
-#define IE_TPC_REPORT                   35    // 802.11h d3.3
-#define IE_SUPP_CHANNELS                36    // 802.11h d3.3
-#define IE_CHANNEL_SWITCH_ANNOUNCEMENT  37    // 802.11h d3.3
-#define IE_MEASUREMENT_REQUEST          38    // 802.11h d3.3
-#define IE_MEASUREMENT_REPORT           39    // 802.11h d3.3
-#define IE_QUIET                        40    // 802.11h d3.3
-#define IE_IBSS_DFS                     41    // 802.11h d3.3
-#define IE_ERP                          42    // 802.11g
-#define IE_TS_DELAY                     43    // 802.11e d9
-#define IE_TCLAS_PROCESSING             44    // 802.11e d9
-#define IE_QOS_CAPABILITY               46    // 802.11e d6
-#define IE_HT_CAP                       45    // 802.11n d1. HT CAPABILITY. ELEMENT ID TBD
-#define IE_AP_CHANNEL_REPORT			51    // 802.11k d6
-#define IE_HT_CAP2                         52    // 802.11n d1. HT CAPABILITY. ELEMENT ID TBD
-#define IE_RSN                          48    // 802.11i d3.0
-#define IE_WPA2                         48    // WPA2
-#define IE_EXT_SUPP_RATES               50    // 802.11g
-#define IE_SUPP_REG_CLASS               59    // 802.11y. Supported regulatory classes.
-#define IE_EXT_CHANNEL_SWITCH_ANNOUNCEMENT	60	// 802.11n
-#define IE_ADD_HT                         61    // 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD
-#define IE_ADD_HT2                        53    // 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD
-
-
-// For 802.11n D3.03
-//#define IE_NEW_EXT_CHA_OFFSET             62    // 802.11n d1. New extension channel offset elemet
-#define IE_SECONDARY_CH_OFFSET		62	// 802.11n D3.03	Secondary Channel Offset element
-#define IE_WAPI							68		// WAPI information element
-#define IE_2040_BSS_COEXIST               72    // 802.11n D3.0.3
-#define IE_2040_BSS_INTOLERANT_REPORT     73    // 802.11n D3.03
-#define IE_OVERLAPBSS_SCAN_PARM           74    // 802.11n D3.03
-#define IE_EXT_CAPABILITY                127   // 802.11n D3.03
-
-
-#define IE_WPA                          221   // WPA
-#define IE_VENDOR_SPECIFIC              221   // Wifi WMM (WME)
-
-#define OUI_BROADCOM_HT              51   //
-#define OUI_BROADCOM_HTADD              52   //
-#define OUI_PREN_HT_CAP              51   //
-#define OUI_PREN_ADD_HT              52   //
-
-// CCX information
-#define IE_AIRONET_CKIP                 133   // CCX1.0 ID 85H for CKIP
-#define IE_AP_TX_POWER                  150   // CCX 2.0 for AP transmit power
-#define IE_MEASUREMENT_CAPABILITY       221   // CCX 2.0
-#define IE_CCX_V2                       221
-#define IE_AIRONET_IPADDRESS            149   // CCX ID 95H for IP Address
-#define IE_AIRONET_CCKMREASSOC          156   // CCX ID 9CH for CCKM Reassociation Request element
-#define CKIP_NEGOTIATION_LENGTH         30
-#define AIRONET_IPADDRESS_LENGTH        10
-#define AIRONET_CCKMREASSOC_LENGTH      24
-
-// ========================================================
-// MLME state machine definition
-// ========================================================
-
-// STA MLME state mahcines
-#define ASSOC_STATE_MACHINE             1
-#define AUTH_STATE_MACHINE              2
-#define AUTH_RSP_STATE_MACHINE          3
-#define SYNC_STATE_MACHINE              4
-#define MLME_CNTL_STATE_MACHINE         5
-#define WPA_PSK_STATE_MACHINE           6
-#define LEAP_STATE_MACHINE              7
-#define AIRONET_STATE_MACHINE           8
-#define ACTION_STATE_MACHINE           9
-
-// AP MLME state machines
-#define AP_ASSOC_STATE_MACHINE          11
-#define AP_AUTH_STATE_MACHINE           12
-#define AP_AUTH_RSP_STATE_MACHINE       13
-#define AP_SYNC_STATE_MACHINE           14
-#define AP_CNTL_STATE_MACHINE           15
-#define AP_WPA_STATE_MACHINE            16
-
-#define WSC_STATE_MACHINE            17
-#define WSC_UPNP_STATE_MACHINE		    18
-
-
-
-#ifdef QOS_DLS_SUPPORT
-#define DLS_STATE_MACHINE               26
-#endif // QOS_DLS_SUPPORT //
-
-//
-// STA's CONTROL/CONNECT state machine: states, events, total function #
-//
-#define CNTL_IDLE                       0
-#define CNTL_WAIT_DISASSOC              1
-#define CNTL_WAIT_JOIN                  2
-#define CNTL_WAIT_REASSOC               3
-#define CNTL_WAIT_START                 4
-#define CNTL_WAIT_AUTH                  5
-#define CNTL_WAIT_ASSOC                 6
-#define CNTL_WAIT_AUTH2                 7
-#define CNTL_WAIT_OID_LIST_SCAN         8
-#define CNTL_WAIT_OID_DISASSOC          9
-#ifdef RT2870
-#define CNTL_WAIT_SCAN_FOR_CONNECT      10
-#endif // RT2870 //
-
-#define MT2_ASSOC_CONF                  34
-#define MT2_AUTH_CONF                   35
-#define MT2_DEAUTH_CONF                 36
-#define MT2_DISASSOC_CONF               37
-#define MT2_REASSOC_CONF                38
-#define MT2_PWR_MGMT_CONF               39
-#define MT2_JOIN_CONF                   40
-#define MT2_SCAN_CONF                   41
-#define MT2_START_CONF                  42
-#define MT2_GET_CONF                    43
-#define MT2_SET_CONF                    44
-#define MT2_RESET_CONF                  45
-#define MT2_MLME_ROAMING_REQ            52
-
-#define CNTL_FUNC_SIZE                  1
-
-//
-// STA's ASSOC state machine: states, events, total function #
-//
-#define ASSOC_IDLE                      0
-#define ASSOC_WAIT_RSP                  1
-#define REASSOC_WAIT_RSP                2
-#define DISASSOC_WAIT_RSP               3
-#define MAX_ASSOC_STATE                 4
-
-#define ASSOC_MACHINE_BASE              0
-#define MT2_MLME_ASSOC_REQ              0
-#define MT2_MLME_REASSOC_REQ            1
-#define MT2_MLME_DISASSOC_REQ           2
-#define MT2_PEER_DISASSOC_REQ           3
-#define MT2_PEER_ASSOC_REQ              4
-#define MT2_PEER_ASSOC_RSP              5
-#define MT2_PEER_REASSOC_REQ            6
-#define MT2_PEER_REASSOC_RSP            7
-#define MT2_DISASSOC_TIMEOUT            8
-#define MT2_ASSOC_TIMEOUT               9
-#define MT2_REASSOC_TIMEOUT             10
-#define MAX_ASSOC_MSG                   11
-
-#define ASSOC_FUNC_SIZE                 (MAX_ASSOC_STATE * MAX_ASSOC_MSG)
-
-//
-// ACT state machine: states, events, total function #
-//
-#define ACT_IDLE                      0
-#define MAX_ACT_STATE                 1
-
-#define ACT_MACHINE_BASE              0
-
-//Those PEER_xx_CATE number is based on real Categary value in IEEE spec. Please don'es modify it by your self.
-//Category
-#define MT2_PEER_SPECTRUM_CATE              0
-#define MT2_PEER_QOS_CATE              1
-#define MT2_PEER_DLS_CATE             2
-#define MT2_PEER_BA_CATE             3
-#define MT2_PEER_PUBLIC_CATE             4
-#define MT2_PEER_RM_CATE             5
-#define MT2_PEER_HT_CATE             7	//	7.4.7
-#define MAX_PEER_CATE_MSG                   7
-#define MT2_MLME_ADD_BA_CATE             8
-#define MT2_MLME_ORI_DELBA_CATE             9
-#define MT2_MLME_REC_DELBA_CATE             10
-#define MT2_MLME_QOS_CATE              11
-#define MT2_MLME_DLS_CATE             12
-#define MT2_ACT_INVALID             13
-#define MAX_ACT_MSG                   14
-
-//Category field
-#define CATEGORY_SPECTRUM		0
-#define CATEGORY_QOS			1
-#define CATEGORY_DLS			2
-#define CATEGORY_BA			3
-#define CATEGORY_PUBLIC		4
-#define CATEGORY_RM			5
-#define CATEGORY_HT			7
-
-
-// DLS Action frame definition
-#define ACTION_DLS_REQUEST			0
-#define ACTION_DLS_RESPONSE			1
-#define ACTION_DLS_TEARDOWN			2
-
-//Spectrum  Action field value 802.11h 7.4.1
-#define SPEC_MRQ	0	// Request
-#define SPEC_MRP	1	//Report
-#define SPEC_TPCRQ	2
-#define SPEC_TPCRP	3
-#define SPEC_CHANNEL_SWITCH	4
-
-
-//BA  Action field value
-#define ADDBA_REQ	0
-#define ADDBA_RESP	1
-#define DELBA   2
-
-//Public's  Action field value in Public Category.  Some in 802.11y and some in 11n
-#define ACTION_BSS_2040_COEXIST				0	// 11n
-#define ACTION_DSE_ENABLEMENT					1	// 11y D9.0
-#define ACTION_DSE_DEENABLEMENT				2	// 11y D9.0
-#define ACTION_DSE_REG_LOCATION_ANNOUNCE	3	// 11y D9.0
-#define ACTION_EXT_CH_SWITCH_ANNOUNCE		4	// 11y D9.0
-#define ACTION_DSE_MEASUREMENT_REQ			5	// 11y D9.0
-#define ACTION_DSE_MEASUREMENT_REPORT		6	// 11y D9.0
-#define ACTION_MEASUREMENT_PILOT_ACTION		7  	// 11y D9.0
-#define ACTION_DSE_POWER_CONSTRAINT			8	// 11y D9.0
-
-
-//HT  Action field value
-#define NOTIFY_BW_ACTION				0
-#define SMPS_ACTION						1
-#define PSMP_ACTION   					2
-#define SETPCO_ACTION					3
-#define MIMO_CHA_MEASURE_ACTION			4
-#define MIMO_N_BEACONFORM				5
-#define MIMO_BEACONFORM					6
-#define ANTENNA_SELECT					7
-#define HT_INFO_EXCHANGE				8
-
-#define ACT_FUNC_SIZE                 (MAX_ACT_STATE * MAX_ACT_MSG)
-//
-// STA's AUTHENTICATION state machine: states, evvents, total function #
-//
-#define AUTH_REQ_IDLE                   0
-#define AUTH_WAIT_SEQ2                  1
-#define AUTH_WAIT_SEQ4                  2
-#define MAX_AUTH_STATE                  3
-
-#define AUTH_MACHINE_BASE               0
-#define MT2_MLME_AUTH_REQ               0
-#define MT2_PEER_AUTH_EVEN              1
-#define MT2_AUTH_TIMEOUT                2
-#define MAX_AUTH_MSG                    3
-
-#define AUTH_FUNC_SIZE                  (MAX_AUTH_STATE * MAX_AUTH_MSG)
-
-//
-// STA's AUTH_RSP state machine: states, events, total function #
-//
-#define AUTH_RSP_IDLE                   0
-#define AUTH_RSP_WAIT_CHAL              1
-#define MAX_AUTH_RSP_STATE              2
-
-#define AUTH_RSP_MACHINE_BASE           0
-#define MT2_AUTH_CHALLENGE_TIMEOUT      0
-#define MT2_PEER_AUTH_ODD               1
-#define MT2_PEER_DEAUTH                 2
-#define MAX_AUTH_RSP_MSG                3
-
-#define AUTH_RSP_FUNC_SIZE              (MAX_AUTH_RSP_STATE * MAX_AUTH_RSP_MSG)
-
-//
-// STA's SYNC state machine: states, events, total function #
-//
-#define SYNC_IDLE                       0  // merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state
-#define JOIN_WAIT_BEACON                1
-#define SCAN_LISTEN                     2
-#define MAX_SYNC_STATE                  3
-
-#define SYNC_MACHINE_BASE               0
-#define MT2_MLME_SCAN_REQ               0
-#define MT2_MLME_JOIN_REQ               1
-#define MT2_MLME_START_REQ              2
-#define MT2_PEER_BEACON                 3
-#define MT2_PEER_PROBE_RSP              4
-#define MT2_PEER_ATIM                   5
-#define MT2_SCAN_TIMEOUT                6
-#define MT2_BEACON_TIMEOUT              7
-#define MT2_ATIM_TIMEOUT                8
-#define MT2_PEER_PROBE_REQ              9
-#define MAX_SYNC_MSG                    10
-
-#define SYNC_FUNC_SIZE                  (MAX_SYNC_STATE * MAX_SYNC_MSG)
-
-//Messages for the DLS state machine
-#define DLS_IDLE						0
-#define MAX_DLS_STATE					1
-
-#define DLS_MACHINE_BASE				0
-#define MT2_MLME_DLS_REQ			    0
-#define MT2_PEER_DLS_REQ			    1
-#define MT2_PEER_DLS_RSP			    2
-#define MT2_MLME_DLS_TEAR_DOWN		    3
-#define MT2_PEER_DLS_TEAR_DOWN		    4
-#define MAX_DLS_MSG				        5
-
-#define DLS_FUNC_SIZE					(MAX_DLS_STATE * MAX_DLS_MSG)
-
-//
-// STA's WPA-PSK State machine: states, events, total function #
-//
-#define WPA_PSK_IDLE					0
-#define MAX_WPA_PSK_STATE				1
-
-#define WPA_MACHINE_BASE                0
-#define MT2_EAPPacket                   0
-#define MT2_EAPOLStart                  1
-#define MT2_EAPOLLogoff                 2
-#define MT2_EAPOLKey                    3
-#define MT2_EAPOLASFAlert               4
-#define MAX_WPA_PSK_MSG                 5
-
-#define	WPA_PSK_FUNC_SIZE				(MAX_WPA_PSK_STATE * MAX_WPA_PSK_MSG)
-
-//
-// STA's CISCO-AIRONET State machine: states, events, total function #
-//
-#define AIRONET_IDLE					0
-#define	AIRONET_SCANNING				1
-#define MAX_AIRONET_STATE				2
-
-#define AIRONET_MACHINE_BASE		    0
-#define MT2_AIRONET_MSG				    0
-#define MT2_AIRONET_SCAN_REQ		    1
-#define MT2_AIRONET_SCAN_DONE		    2
-#define MAX_AIRONET_MSG				    3
-
-#define	AIRONET_FUNC_SIZE				(MAX_AIRONET_STATE * MAX_AIRONET_MSG)
-
-//
-// WSC State machine: states, events, total function #
-//
-
-//
-// AP's CONTROL/CONNECT state machine: states, events, total function #
-//
-#define AP_CNTL_FUNC_SIZE               1
-
-//
-// AP's ASSOC state machine: states, events, total function #
-//
-#define AP_ASSOC_IDLE                   0
-#define AP_MAX_ASSOC_STATE              1
-
-#define AP_ASSOC_MACHINE_BASE           0
-#define APMT2_MLME_DISASSOC_REQ         0
-#define APMT2_PEER_DISASSOC_REQ         1
-#define APMT2_PEER_ASSOC_REQ            2
-#define APMT2_PEER_REASSOC_REQ          3
-#define APMT2_CLS3ERR                   4
-#define AP_MAX_ASSOC_MSG                5
-
-#define AP_ASSOC_FUNC_SIZE              (AP_MAX_ASSOC_STATE * AP_MAX_ASSOC_MSG)
-
-//
-// AP's AUTHENTICATION state machine: states, events, total function #
-//
-#define AP_AUTH_REQ_IDLE                0
-#define AP_MAX_AUTH_STATE               1
-
-#define AP_AUTH_MACHINE_BASE            0
-#define APMT2_MLME_DEAUTH_REQ           0
-#define APMT2_CLS2ERR                   1
-#define AP_MAX_AUTH_MSG                 2
-
-#define AP_AUTH_FUNC_SIZE               (AP_MAX_AUTH_STATE * AP_MAX_AUTH_MSG)
-
-//
-// AP's AUTH-RSP state machine: states, events, total function #
-//
-#define AP_AUTH_RSP_IDLE                0
-#define AP_MAX_AUTH_RSP_STATE           1
-
-#define AP_AUTH_RSP_MACHINE_BASE        0
-#define APMT2_AUTH_CHALLENGE_TIMEOUT    0
-#define APMT2_PEER_AUTH_ODD             1
-#define APMT2_PEER_DEAUTH               2
-#define AP_MAX_AUTH_RSP_MSG             3
-
-#define AP_AUTH_RSP_FUNC_SIZE           (AP_MAX_AUTH_RSP_STATE * AP_MAX_AUTH_RSP_MSG)
-
-//
-// AP's SYNC state machine: states, events, total function #
-//
-#define AP_SYNC_IDLE                    0
-#define AP_SCAN_LISTEN					1
-#define AP_MAX_SYNC_STATE               2
-
-#define AP_SYNC_MACHINE_BASE            0
-#define APMT2_PEER_PROBE_REQ            0
-#define APMT2_PEER_BEACON               1
-#define APMT2_MLME_SCAN_REQ				2
-#define APMT2_PEER_PROBE_RSP			3
-#define APMT2_SCAN_TIMEOUT				4
-#define APMT2_MLME_SCAN_CNCL			5
-#define AP_MAX_SYNC_MSG                 6
-
-#define AP_SYNC_FUNC_SIZE               (AP_MAX_SYNC_STATE * AP_MAX_SYNC_MSG)
-
-//
-// AP's WPA state machine: states, events, total function #
-//
-#define AP_WPA_PTK                      0
-#define AP_MAX_WPA_PTK_STATE            1
-
-#define AP_WPA_MACHINE_BASE             0
-#define APMT2_EAPPacket                 0
-#define APMT2_EAPOLStart                1
-#define APMT2_EAPOLLogoff               2
-#define APMT2_EAPOLKey                  3
-#define APMT2_EAPOLASFAlert             4
-#define AP_MAX_WPA_MSG                  5
-
-#define AP_WPA_FUNC_SIZE                (AP_MAX_WPA_PTK_STATE * AP_MAX_WPA_MSG)
-
-
-
-// =============================================================================
-
-// value domain of 802.11 header FC.Tyte, which is b3..b2 of the 1st-byte of MAC header
-#define BTYPE_MGMT                  0
-#define BTYPE_CNTL                  1
-#define BTYPE_DATA                  2
-
-// value domain of 802.11 MGMT frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
-#define SUBTYPE_ASSOC_REQ           0
-#define SUBTYPE_ASSOC_RSP           1
-#define SUBTYPE_REASSOC_REQ         2
-#define SUBTYPE_REASSOC_RSP         3
-#define SUBTYPE_PROBE_REQ           4
-#define SUBTYPE_PROBE_RSP           5
-#define SUBTYPE_BEACON              8
-#define SUBTYPE_ATIM                9
-#define SUBTYPE_DISASSOC            10
-#define SUBTYPE_AUTH                11
-#define SUBTYPE_DEAUTH              12
-#define SUBTYPE_ACTION              13
-#define SUBTYPE_ACTION_NO_ACK              14
-
-// value domain of 802.11 CNTL frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
-#define SUBTYPE_WRAPPER       	7
-#define SUBTYPE_BLOCK_ACK_REQ       8
-#define SUBTYPE_BLOCK_ACK           9
-#define SUBTYPE_PS_POLL             10
-#define SUBTYPE_RTS                 11
-#define SUBTYPE_CTS                 12
-#define SUBTYPE_ACK                 13
-#define SUBTYPE_CFEND               14
-#define SUBTYPE_CFEND_CFACK         15
-
-// value domain of 802.11 DATA frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
-#define SUBTYPE_DATA                0
-#define SUBTYPE_DATA_CFACK          1
-#define SUBTYPE_DATA_CFPOLL         2
-#define SUBTYPE_DATA_CFACK_CFPOLL   3
-#define SUBTYPE_NULL_FUNC           4
-#define SUBTYPE_CFACK               5
-#define SUBTYPE_CFPOLL              6
-#define SUBTYPE_CFACK_CFPOLL        7
-#define SUBTYPE_QDATA               8
-#define SUBTYPE_QDATA_CFACK         9
-#define SUBTYPE_QDATA_CFPOLL        10
-#define SUBTYPE_QDATA_CFACK_CFPOLL  11
-#define SUBTYPE_QOS_NULL            12
-#define SUBTYPE_QOS_CFACK           13
-#define SUBTYPE_QOS_CFPOLL          14
-#define SUBTYPE_QOS_CFACK_CFPOLL    15
-
-// ACK policy of QOS Control field bit 6:5
-#define NORMAL_ACK                  0x00  // b6:5 = 00
-#define NO_ACK                      0x20  // b6:5 = 01
-#define NO_EXPLICIT_ACK             0x40  // b6:5 = 10
-#define BLOCK_ACK                   0x60  // b6:5 = 11
-
-//
-// rtmp_data.c use these definition
-//
-#define LENGTH_802_11               24
-#define LENGTH_802_11_AND_H         30
-#define LENGTH_802_11_CRC_H         34
-#define LENGTH_802_11_CRC           28
-#define LENGTH_802_11_WITH_ADDR4    30
-#define LENGTH_802_3                14
-#define LENGTH_802_3_TYPE           2
-#define LENGTH_802_1_H              8
-#define LENGTH_EAPOL_H              4
-#define LENGTH_WMMQOS_H				2
-#define LENGTH_CRC                  4
-#define MAX_SEQ_NUMBER              0x0fff
-#define LENGTH_802_3_NO_TYPE		12
-#define LENGTH_802_1Q				4 /* VLAN related */
-
-// STA_CSR4.field.TxResult
-#define TX_RESULT_SUCCESS           0
-#define TX_RESULT_ZERO_LENGTH       1
-#define TX_RESULT_UNDER_RUN         2
-#define TX_RESULT_OHY_ERROR         4
-#define TX_RESULT_RETRY_FAIL        6
-
-// All PHY rate summary in TXD
-// Preamble MODE in TxD
-#define MODE_CCK	0
-#define MODE_OFDM   1
-#ifdef DOT11_N_SUPPORT
-#define MODE_HTMIX	2
-#define MODE_HTGREENFIELD	3
-#endif // DOT11_N_SUPPORT //
-// MCS for CCK.  BW.SGI.STBC are reserved
-#define MCS_LONGP_RATE_1                      0	 // long preamble CCK 1Mbps
-#define MCS_LONGP_RATE_2                      1	// long preamble CCK 1Mbps
-#define MCS_LONGP_RATE_5_5                    2
-#define MCS_LONGP_RATE_11                     3
-#define MCS_SHORTP_RATE_1                      4	 // long preamble CCK 1Mbps. short is forbidden in 1Mbps
-#define MCS_SHORTP_RATE_2                      5	// short preamble CCK 2Mbps
-#define MCS_SHORTP_RATE_5_5                    6
-#define MCS_SHORTP_RATE_11                     7
-// To send duplicate legacy OFDM. set BW=BW_40.  SGI.STBC are reserved
-#define MCS_RATE_6                      0   // legacy OFDM
-#define MCS_RATE_9                      1   // OFDM
-#define MCS_RATE_12                     2   // OFDM
-#define MCS_RATE_18                     3   // OFDM
-#define MCS_RATE_24                     4  // OFDM
-#define MCS_RATE_36                     5   // OFDM
-#define MCS_RATE_48                     6  // OFDM
-#define MCS_RATE_54                     7 // OFDM
-// HT
-#define MCS_0		0	// 1S
-#define MCS_1		1
-#define MCS_2		2
-#define MCS_3		3
-#define MCS_4		4
-#define MCS_5		5
-#define MCS_6		6
-#define MCS_7		7
-#define MCS_8		8	// 2S
-#define MCS_9		9
-#define MCS_10		10
-#define MCS_11		11
-#define MCS_12		12
-#define MCS_13		13
-#define MCS_14		14
-#define MCS_15		15
-#define MCS_16		16	// 3*3
-#define MCS_17		17
-#define MCS_18		18
-#define MCS_19		19
-#define MCS_20		20
-#define MCS_21		21
-#define MCS_22		22
-#define MCS_23		23
-#define MCS_32		32
-#define MCS_AUTO		33
-
-#ifdef DOT11_N_SUPPORT
-// OID_HTPHYMODE
-// MODE
-#define HTMODE_MM	0
-#define HTMODE_GF	1
-#endif // DOT11_N_SUPPORT //
-
-// Fixed Tx MODE - HT, CCK or OFDM
-#define FIXED_TXMODE_HT		0
-#define FIXED_TXMODE_CCK	1
-#define FIXED_TXMODE_OFDM 	2
-// BW
-#define BW_20		BAND_WIDTH_20
-#define BW_40		BAND_WIDTH_40
-#define BW_BOTH		BAND_WIDTH_BOTH
-#define BW_10		BAND_WIDTH_10	// 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field.
-
-#ifdef DOT11_N_SUPPORT
-// SHORTGI
-#define GI_400		GAP_INTERVAL_400	// only support in HT mode
-#define GI_BOTH		GAP_INTERVAL_BOTH
-#endif // DOT11_N_SUPPORT //
-#define GI_800		GAP_INTERVAL_800
-// STBC
-#define STBC_NONE	0
-#ifdef DOT11_N_SUPPORT
-#define STBC_USE	1	// limited use in rt2860b phy
-#define RXSTBC_ONE	1	// rx support of one spatial stream
-#define RXSTBC_TWO	2	// rx support of 1 and 2 spatial stream
-#define RXSTBC_THR	3	// rx support of 1~3 spatial stream
-// MCS FEEDBACK
-#define MCSFBK_NONE	0  // not support mcs feedback /
-#define MCSFBK_RSV	1	// reserved
-#define MCSFBK_UNSOLICIT	2	// only support unsolict mcs feedback
-#define MCSFBK_MRQ	3	// response to both MRQ and unsolict mcs feedback
-
-// MIMO power safe
-#define	MMPS_STATIC	0
-#define	MMPS_DYNAMIC		1
-#define   MMPS_RSV		2
-#define MMPS_ENABLE		3
-
-
-// A-MSDU size
-#define	AMSDU_0	0
-#define	AMSDU_1		1
-
-#endif // DOT11_N_SUPPORT //
-
-// MCS use 7 bits
-#define TXRATEMIMO		0x80
-#define TXRATEMCS		0x7F
-#define TXRATEOFDM		0x7F
-#define RATE_1                      0
-#define RATE_2                      1
-#define RATE_5_5                    2
-#define RATE_11                     3
-#define RATE_6                      4   // OFDM
-#define RATE_9                      5   // OFDM
-#define RATE_12                     6   // OFDM
-#define RATE_18                     7   // OFDM
-#define RATE_24                     8   // OFDM
-#define RATE_36                     9   // OFDM
-#define RATE_48                     10  // OFDM
-#define RATE_54                     11  // OFDM
-#define RATE_FIRST_OFDM_RATE        RATE_6
-#define RATE_LAST_OFDM_RATE        	RATE_54
-#define RATE_6_5                    12  // HT mix
-#define RATE_13                     13  // HT mix
-#define RATE_19_5                   14  // HT mix
-#define RATE_26                     15  // HT mix
-#define RATE_39                     16  // HT mix
-#define RATE_52                     17  // HT mix
-#define RATE_58_5                   18  // HT mix
-#define RATE_65                     19  // HT mix
-#define RATE_78                     20  // HT mix
-#define RATE_104                    21  // HT mix
-#define RATE_117                    22  // HT mix
-#define RATE_130                    23  // HT mix
-//#define RATE_AUTO_SWITCH            255 // for StaCfg.FixedTxRate only
-#define HTRATE_0                      12
-#define RATE_FIRST_MM_RATE        HTRATE_0
-#define RATE_FIRST_HT_RATE        HTRATE_0
-#define RATE_LAST_HT_RATE        HTRATE_0
-
-// pTxWI->txop
-#define IFS_HTTXOP                 0	// The txop will be handles by ASIC.
-#define IFS_PIFS                    1
-#define IFS_SIFS                    2
-#define IFS_BACKOFF                 3
-
-// pTxD->RetryMode
-#define LONG_RETRY                  1
-#define SHORT_RETRY                 0
-
-// Country Region definition
-#define REGION_MINIMUM_BG_BAND            0
-#define REGION_0_BG_BAND                  0       // 1-11
-#define REGION_1_BG_BAND                  1       // 1-13
-#define REGION_2_BG_BAND                  2       // 10-11
-#define REGION_3_BG_BAND                  3       // 10-13
-#define REGION_4_BG_BAND                  4       // 14
-#define REGION_5_BG_BAND                  5       // 1-14
-#define REGION_6_BG_BAND                  6       // 3-9
-#define REGION_7_BG_BAND                  7       // 5-13
-#define REGION_31_BG_BAND                 31       // 5-13
-#define REGION_MAXIMUM_BG_BAND            7
-
-#define REGION_MINIMUM_A_BAND             0
-#define REGION_0_A_BAND                   0       // 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
-#define REGION_1_A_BAND                   1       // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
-#define REGION_2_A_BAND                   2       // 36, 40, 44, 48, 52, 56, 60, 64
-#define REGION_3_A_BAND                   3       // 52, 56, 60, 64, 149, 153, 157, 161
-#define REGION_4_A_BAND                   4       // 149, 153, 157, 161, 165
-#define REGION_5_A_BAND                   5       // 149, 153, 157, 161
-#define REGION_6_A_BAND                   6       // 36, 40, 44, 48
-#define REGION_7_A_BAND                   7       // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
-#define REGION_8_A_BAND                   8       // 52, 56, 60, 64
-#define REGION_9_A_BAND                   9       // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165
-#define REGION_10_A_BAND                  10	  // 36, 40, 44, 48, 149, 153, 157, 161, 165
-#define REGION_11_A_BAND                  11	  // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161
-#define REGION_MAXIMUM_A_BAND             11
-
-// pTxD->CipherAlg
-#define CIPHER_NONE                 0
-#define CIPHER_WEP64                1
-#define CIPHER_WEP128               2
-#define CIPHER_TKIP                 3
-#define CIPHER_AES                  4
-#define CIPHER_CKIP64               5
-#define CIPHER_CKIP128              6
-#define CIPHER_TKIP_NO_MIC          7       // MIC appended by driver: not a valid value in hardware key table
-#define CIPHER_SMS4					8
-
-// value domain of pAd->RfIcType
-#define RFIC_2820                   1       // 2.4G 2T3R
-#define RFIC_2850                   2       // 2.4G/5G 2T3R
-#define RFIC_2720                   3       // 2.4G 1T2R
-#define RFIC_2750                   4       // 2.4G/5G 1T2R
-#define RFIC_3020                   5       // 2.4G 1T1R
-#define RFIC_2020                   6       // 2.4G B/G
-#define RFIC_3021                   7       // 2.4G 1T2R
-#define RFIC_3022                   8       // 2.4G 2T2R
-
-// LED Status.
-#define LED_LINK_DOWN               0
-#define LED_LINK_UP                 1
-#define LED_RADIO_OFF               2
-#define LED_RADIO_ON                3
-#define LED_HALT                    4
-#define LED_WPS                     5
-#define LED_ON_SITE_SURVEY          6
-#define LED_POWER_UP                7
-
-// value domain of pAd->LedCntl.LedMode and E2PROM
-#define LED_MODE_DEFAULT            0
-#define LED_MODE_TWO_LED			1
-#define LED_MODE_SIGNAL_STREGTH		8  // EEPROM define =8
-
-// RC4 init value, used fro WEP & TKIP
-#define PPPINITFCS32                0xffffffff   /* Initial FCS value */
-
-// value domain of pAd->StaCfg.PortSecured. 802.1X controlled port definition
-#define WPA_802_1X_PORT_SECURED     1
-#define WPA_802_1X_PORT_NOT_SECURED 2
-
-#define PAIRWISE_KEY                1
-#define GROUP_KEY                   2
-
-//definition of DRS
-#define MAX_STEP_OF_TX_RATE_SWITCH	32
-
-
-// pre-allocated free NDIS PACKET/BUFFER poll for internal usage
-#define MAX_NUM_OF_FREE_NDIS_PACKET 128
-
-//Block ACK
-#define MAX_TX_REORDERBUF   64
-#define MAX_RX_REORDERBUF   64
-#define DEFAULT_TX_TIMEOUT   30
-#define DEFAULT_RX_TIMEOUT   30
-
-// definition of Recipient or Originator
-#define I_RECIPIENT                  TRUE
-#define I_ORIGINATOR                   FALSE
-
-#define DEFAULT_BBP_TX_POWER        0
-#define DEFAULT_RF_TX_POWER         5
-
-#define MAX_INI_BUFFER_SIZE			4096
-#define MAX_PARAM_BUFFER_SIZE		(2048) // enough for ACL (18*64)
-											//18 : the length of Mac address acceptable format "01:02:03:04:05:06;")
-											//64 : MAX_NUM_OF_ACL_LIST
-// definition of pAd->OpMode
-#define OPMODE_STA                  0
-#define OPMODE_AP                   1
-//#define OPMODE_L3_BRG               2       // as AP and STA at the same time
-
-#ifdef RT_BIG_ENDIAN
-#define DIR_READ                    0
-#define DIR_WRITE                   1
-#define TYPE_TXD                    0
-#define TYPE_RXD                    1
-#define TYPE_TXINFO					0
-#define TYPE_RXINFO					1
-#define TYPE_TXWI					0
-#define TYPE_RXWI					1
-#endif
-
-// ========================= AP rtmp_def.h ===========================
-// value domain for pAd->EventTab.Log[].Event
-#define EVENT_RESET_ACCESS_POINT    0 // Log = "hh:mm:ss   Restart Access Point"
-#define EVENT_ASSOCIATED            1 // Log = "hh:mm:ss   STA 00:01:02:03:04:05 associated"
-#define EVENT_DISASSOCIATED         2 // Log = "hh:mm:ss   STA 00:01:02:03:04:05 left this BSS"
-#define EVENT_AGED_OUT              3 // Log = "hh:mm:ss   STA 00:01:02:03:04:05 was aged-out and removed from this BSS"
-#define EVENT_COUNTER_M             4
-#define EVENT_INVALID_PSK           5
-#define EVENT_MAX_EVENT_TYPE        6
-// ==== end of AP rtmp_def.h ============
-
-// definition RSSI Number
-#define RSSI_0					0
-#define RSSI_1					1
-#define RSSI_2					2
-
-// definition of radar detection
-#define RD_NORMAL_MODE				0	// Not found radar signal
-#define RD_SWITCHING_MODE			1	// Found radar signal, and doing channel switch
-#define RD_SILENCE_MODE				2	// After channel switch, need to be silence a while to ensure radar not found
-
-//Driver defined cid for mapping status and command.
-#define  SLEEPCID	0x11
-#define  WAKECID	0x22
-#define  QUERYPOWERCID	0x33
-#define  OWNERMCU	0x1
-#define  OWNERCPU	0x0
-
-// MBSSID definition
-#define ENTRY_NOT_FOUND             0xFF
-
-
-/* After Linux 2.6.9,
- * VLAN module use Private (from user) interface flags (netdevice->priv_flags).
- * #define IFF_802_1Q_VLAN 0x1         --    802.1Q VLAN device.  in if.h
- * ref to ip_sabotage_out() [ out->priv_flags & IFF_802_1Q_VLAN ] in br_netfilter.c
- *
- * For this reason, we MUST use EVEN value in priv_flags
- */
-#define INT_MAIN                    0x0100
-#define INT_MBSSID                  0x0200
-#define INT_WDS                     0x0300
-#define INT_APCLI                   0x0400
-#define INT_MESH                   	0x0500
-
-// Use bitmap to allow coexist of ATE_TXFRAME and ATE_RXFRAME(i.e.,to support LoopBack mode)
-#ifdef RALINK_ATE
-#define	ATE_START                   0x00   // Start ATE
-#define	ATE_STOP                    0x80   // Stop ATE
-#define	ATE_TXCONT                  0x05   // Continuous Transmit
-#define	ATE_TXCARR                  0x09   // Transmit Carrier
-#define	ATE_TXCARRSUPP              0x11   // Transmit Carrier Suppression
-#define	ATE_TXFRAME                 0x01   // Transmit Frames
-#define	ATE_RXFRAME                 0x02   // Receive Frames
-#ifdef RALINK_28xx_QA
-#define ATE_TXSTOP                  0xe2   // Stop Transmition(i.e., TXCONT, TXCARR, TXCARRSUPP, and TXFRAME)
-#define ATE_RXSTOP					0xfd   // Stop receiving Frames
-#define	BBP22_TXFRAME     			0x00   // Transmit Frames
-#define	BBP22_TXCONT_OR_CARRSUPP    0x80   // Continuous Transmit or Carrier Suppression
-#define	BBP22_TXCARR                0xc1   // Transmit Carrier
-#define	BBP24_TXCONT                0x00   // Continuous Transmit
-#define	BBP24_CARRSUPP              0x01   // Carrier Suppression
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
-// WEP Key TYPE
-#define WEP_HEXADECIMAL_TYPE    0
-#define WEP_ASCII_TYPE          1
-
-
-
-// WIRELESS EVENTS definition
-/* Max number of char in custom event, refer to wireless_tools.28/wireless.20.h */
-#define IW_CUSTOM_MAX_LEN				  			255	/* In bytes */
-
-// For system event - start
-#define	IW_SYS_EVENT_FLAG_START                     0x0200
-#define	IW_ASSOC_EVENT_FLAG                         0x0200
-#define	IW_DISASSOC_EVENT_FLAG                      0x0201
-#define	IW_DEAUTH_EVENT_FLAG                      	0x0202
-#define	IW_AGEOUT_EVENT_FLAG                      	0x0203
-#define	IW_COUNTER_MEASURES_EVENT_FLAG              0x0204
-#define	IW_REPLAY_COUNTER_DIFF_EVENT_FLAG           0x0205
-#define	IW_RSNIE_DIFF_EVENT_FLAG           			0x0206
-#define	IW_MIC_DIFF_EVENT_FLAG           			0x0207
-#define IW_ICV_ERROR_EVENT_FLAG						0x0208
-#define IW_MIC_ERROR_EVENT_FLAG						0x0209
-#define IW_GROUP_HS_TIMEOUT_EVENT_FLAG				0x020A
-#define	IW_PAIRWISE_HS_TIMEOUT_EVENT_FLAG			0x020B
-#define IW_RSNIE_SANITY_FAIL_EVENT_FLAG				0x020C
-#define IW_SET_KEY_DONE_WPA1_EVENT_FLAG				0x020D
-#define IW_SET_KEY_DONE_WPA2_EVENT_FLAG				0x020E
-#define IW_STA_LINKUP_EVENT_FLAG					0x020F
-#define IW_STA_LINKDOWN_EVENT_FLAG					0x0210
-#define IW_SCAN_COMPLETED_EVENT_FLAG				0x0211
-#define IW_SCAN_ENQUEUE_FAIL_EVENT_FLAG				0x0212
-// if add new system event flag, please upadte the IW_SYS_EVENT_FLAG_END
-#define	IW_SYS_EVENT_FLAG_END                       0x0212
-#define	IW_SYS_EVENT_TYPE_NUM						(IW_SYS_EVENT_FLAG_END - IW_SYS_EVENT_FLAG_START + 1)
-// For system event - end
-
-// For spoof attack event - start
-#define	IW_SPOOF_EVENT_FLAG_START                   0x0300
-#define IW_CONFLICT_SSID_EVENT_FLAG					0x0300
-#define IW_SPOOF_ASSOC_RESP_EVENT_FLAG				0x0301
-#define IW_SPOOF_REASSOC_RESP_EVENT_FLAG			0x0302
-#define IW_SPOOF_PROBE_RESP_EVENT_FLAG				0x0303
-#define IW_SPOOF_BEACON_EVENT_FLAG					0x0304
-#define IW_SPOOF_DISASSOC_EVENT_FLAG				0x0305
-#define IW_SPOOF_AUTH_EVENT_FLAG					0x0306
-#define IW_SPOOF_DEAUTH_EVENT_FLAG					0x0307
-#define IW_SPOOF_UNKNOWN_MGMT_EVENT_FLAG			0x0308
-#define IW_REPLAY_ATTACK_EVENT_FLAG					0x0309
-// if add new spoof attack event flag, please upadte the IW_SPOOF_EVENT_FLAG_END
-#define	IW_SPOOF_EVENT_FLAG_END                     0x0309
-#define	IW_SPOOF_EVENT_TYPE_NUM						(IW_SPOOF_EVENT_FLAG_END - IW_SPOOF_EVENT_FLAG_START + 1)
-// For spoof attack event - end
-
-// For flooding attack event - start
-#define	IW_FLOOD_EVENT_FLAG_START                   0x0400
-#define IW_FLOOD_AUTH_EVENT_FLAG					0x0400
-#define IW_FLOOD_ASSOC_REQ_EVENT_FLAG				0x0401
-#define IW_FLOOD_REASSOC_REQ_EVENT_FLAG				0x0402
-#define IW_FLOOD_PROBE_REQ_EVENT_FLAG				0x0403
-#define IW_FLOOD_DISASSOC_EVENT_FLAG				0x0404
-#define IW_FLOOD_DEAUTH_EVENT_FLAG					0x0405
-#define IW_FLOOD_EAP_REQ_EVENT_FLAG					0x0406
-// if add new flooding attack event flag, please upadte the IW_FLOOD_EVENT_FLAG_END
-#define	IW_FLOOD_EVENT_FLAG_END                   	0x0406
-#define	IW_FLOOD_EVENT_TYPE_NUM						(IW_FLOOD_EVENT_FLAG_END - IW_FLOOD_EVENT_FLAG_START + 1)
-// For flooding attack - end
-
-// End - WIRELESS EVENTS definition
-
-#ifdef CONFIG_STA_SUPPORT
-// definition for DLS, kathy
-#define	MAX_NUM_OF_INIT_DLS_ENTRY   1
-#define	MAX_NUM_OF_DLS_ENTRY        MAX_NUMBER_OF_DLS_ENTRY
-
-//Block ACK , rt2860, kathy
-#define MAX_TX_REORDERBUF		64
-#define MAX_RX_REORDERBUF		64
-#define DEFAULT_TX_TIMEOUT		30
-#define DEFAULT_RX_TIMEOUT		30
-#ifndef CONFIG_AP_SUPPORT
-#define MAX_BARECI_SESSION		8
-#endif
-
-#ifndef IW_ESSID_MAX_SIZE
-/* Maximum size of the ESSID and pAd->nickname strings */
-#define IW_ESSID_MAX_SIZE   		32
-#endif
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef MCAST_RATE_SPECIFIC
-#define MCAST_DISABLE	0
-#define MCAST_CCK		1
-#define MCAST_OFDM		2
-#define MCAST_HTMIX		3
-#endif // MCAST_RATE_SPECIFIC //
-
-// For AsicRadioOff/AsicRadioOn function
-#define DOT11POWERSAVE		0
-#define GUIRADIO_OFF		1
-#define RTMP_HALT		    2
-#define GUI_IDLE_POWER_SAVE		3
-// --
-
-
-// definition for WpaSupport flag
-#define WPA_SUPPLICANT_DISABLE				0
-#define WPA_SUPPLICANT_ENABLE				1
-#define	WPA_SUPPLICANT_ENABLE_WITH_WEB_UI	2
-
-// Endian byte swapping codes
-#define SWAP16(x) \
-    ((UINT16)( \
-    (((UINT16)(x) & (UINT16) 0x00ffU) << 8) | \
-    (((UINT16)(x) & (UINT16) 0xff00U) >> 8) ))
-
-#define SWAP32(x) \
-    ((UINT32)( \
-    (((UINT32)(x) & (UINT32) 0x000000ffUL) << 24) | \
-    (((UINT32)(x) & (UINT32) 0x0000ff00UL) <<  8) | \
-    (((UINT32)(x) & (UINT32) 0x00ff0000UL) >>  8) | \
-    (((UINT32)(x) & (UINT32) 0xff000000UL) >> 24) ))
-
-#define SWAP64(x) \
-    ((UINT64)( \
-    (UINT64)(((UINT64)(x) & (UINT64) 0x00000000000000ffULL) << 56) | \
-    (UINT64)(((UINT64)(x) & (UINT64) 0x000000000000ff00ULL) << 40) | \
-    (UINT64)(((UINT64)(x) & (UINT64) 0x0000000000ff0000ULL) << 24) | \
-    (UINT64)(((UINT64)(x) & (UINT64) 0x00000000ff000000ULL) <<  8) | \
-    (UINT64)(((UINT64)(x) & (UINT64) 0x000000ff00000000ULL) >>  8) | \
-    (UINT64)(((UINT64)(x) & (UINT64) 0x0000ff0000000000ULL) >> 24) | \
-    (UINT64)(((UINT64)(x) & (UINT64) 0x00ff000000000000ULL) >> 40) | \
-    (UINT64)(((UINT64)(x) & (UINT64) 0xff00000000000000ULL) >> 56) ))
-
-#ifdef RT_BIG_ENDIAN
-
-#define cpu2le64(x) SWAP64((x))
-#define le2cpu64(x) SWAP64((x))
-#define cpu2le32(x) SWAP32((x))
-#define le2cpu32(x) SWAP32((x))
-#define cpu2le16(x) SWAP16((x))
-#define le2cpu16(x) SWAP16((x))
-#define cpu2be64(x) ((UINT64)(x))
-#define be2cpu64(x) ((UINT64)(x))
-#define cpu2be32(x) ((UINT32)(x))
-#define be2cpu32(x) ((UINT32)(x))
-#define cpu2be16(x) ((UINT16)(x))
-#define be2cpu16(x) ((UINT16)(x))
-
-#else   // Little_Endian
-
-#define cpu2le64(x) ((UINT64)(x))
-#define le2cpu64(x) ((UINT64)(x))
-#define cpu2le32(x) ((UINT32)(x))
-#define le2cpu32(x) ((UINT32)(x))
-#define cpu2le16(x) ((UINT16)(x))
-#define le2cpu16(x) ((UINT16)(x))
-#define cpu2be64(x) SWAP64((x))
-#define be2cpu64(x) SWAP64((x))
-#define cpu2be32(x) SWAP32((x))
-#define be2cpu32(x) SWAP32((x))
-#define cpu2be16(x) SWAP16((x))
-#define be2cpu16(x) SWAP16((x))
-
-#endif  // RT_BIG_ENDIAN
-
-#endif  // __RTMP_DEF_H__
-
-
+#include "../rt2870/rtmp_def.h"
diff --git a/drivers/staging/rt3070/rtmp_type.h b/drivers/staging/rt3070/rtmp_type.h
index 4e4b168b9e9..42384e50679 100644
--- a/drivers/staging/rt3070/rtmp_type.h
+++ b/drivers/staging/rt3070/rtmp_type.h
@@ -1,95 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-    rtmp_type.h
-
-    Abstract:
-
-    Revision History:
-    Who         When            What
-    --------    ----------      ----------------------------------------------
-    Name        Date            Modification logs
-    Paul Lin    1-2-2004
-*/
-#ifndef __RTMP_TYPE_H__
-#define __RTMP_TYPE_H__
-
-
-#define PACKED  __attribute__ ((packed))
-
-// Put platform dependent declaration here
-// For example, linux type definition
-typedef unsigned char		UINT8;
-typedef unsigned short		UINT16;
-typedef unsigned int		UINT32;
-typedef unsigned long long	UINT64;
-typedef int					INT32;
-typedef long long 			INT64;
-
-typedef unsigned char *			PUINT8;
-typedef unsigned short *		PUINT16;
-typedef unsigned int *			PUINT32;
-typedef unsigned long long *	PUINT64;
-typedef int	*					PINT32;
-typedef long long * 			PINT64;
-
-typedef signed char			CHAR;
-typedef signed short		SHORT;
-typedef signed int			INT;
-typedef signed long			LONG;
-typedef signed long long	LONGLONG;
-
-
-typedef unsigned char		UCHAR;
-typedef unsigned short		USHORT;
-typedef unsigned int		UINT;
-typedef unsigned long		ULONG;
-typedef unsigned long long	ULONGLONG;
-
-typedef unsigned char		BOOLEAN;
-typedef void				VOID;
-
-typedef VOID *				PVOID;
-typedef CHAR *				PCHAR;
-typedef UCHAR * 			PUCHAR;
-typedef USHORT *			PUSHORT;
-typedef LONG *				PLONG;
-typedef ULONG *				PULONG;
-typedef UINT *				PUINT;
-
-typedef unsigned int	NDIS_MEDIA_STATE;
-
-typedef union _LARGE_INTEGER {
-    struct {
-        UINT LowPart;
-        INT32 HighPart;
-    } u;
-    INT64 QuadPart;
-} LARGE_INTEGER;
-
-#endif  // __RTMP_TYPE_H__
-
+#include "../rt2870/rtmp_type.h"
diff --git a/drivers/staging/rt3070/spectrum.h b/drivers/staging/rt3070/spectrum.h
index 94cfa5b174f..1ca9c2584bf 100644
--- a/drivers/staging/rt3070/spectrum.h
+++ b/drivers/staging/rt3070/spectrum.h
@@ -1,322 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-#ifndef __SPECTRUM_H__
-#define __SPECTRUM_H__
-
-#include "rtmp_type.h"
-#include "spectrum_def.h"
-
-typedef struct PACKED _TPC_REPORT_INFO
-{
-	UINT8 TxPwr;
-	UINT8 LinkMargin;
-} TPC_REPORT_INFO, *PTPC_REPORT_INFO;
-
-typedef struct PACKED _CH_SW_ANN_INFO
-{
-	UINT8 ChSwMode;
-	UINT8 Channel;
-	UINT8 ChSwCnt;
-} CH_SW_ANN_INFO, *PCH_SW_ANN_INFO;
-
-typedef union PACKED _MEASURE_REQ_MODE
-{
-#ifdef RT_BIG_ENDIAN
-	struct PACKED
-	{
-		UINT8 Rev1:4;
-		UINT8 Report:1;
-		UINT8 Request:1;
-		UINT8 Enable:1;
-		UINT8 Rev0:1;
-	} field;
-#else
-	struct PACKED
-	{
-		UINT8 Rev0:1;
-		UINT8 Enable:1;
-		UINT8 Request:1;
-		UINT8 Report:1;
-		UINT8 Rev1:4;
-	} field;
-#endif // RT_BIG_ENDIAN //
-	UINT8 word;
-} MEASURE_REQ_MODE, *PMEASURE_REQ_MODE;
-
-typedef struct PACKED _MEASURE_REQ
-{
-	UINT8 ChNum;
-	UINT64 MeasureStartTime;
-	UINT16 MeasureDuration;
-} MEASURE_REQ, *PMEASURE_REQ;
-
-typedef struct PACKED _MEASURE_REQ_INFO
-{
-	UINT8 Token;
-	MEASURE_REQ_MODE ReqMode;
-	UINT8 ReqType;
-	MEASURE_REQ MeasureReq;
-} MEASURE_REQ_INFO, *PMEASURE_REQ_INFO;
-
-typedef union PACKED _MEASURE_BASIC_REPORT_MAP
-{
-#ifdef RT_BIG_ENDIAN
-	struct PACKED
-	{
-		UINT8 Rev:3;
-		UINT8 Unmeasure:1;
-		UINT8 Radar:1;
-		UINT8 UnidentifiedSignal:1;
-		UINT8 OfdmPreamble:1;
-		UINT8 BSS:1;
-	} field;
-#else
-	struct PACKED
-	{
-		UINT8 BSS:1;
-		UINT8 OfdmPreamble:1;
-		UINT8 UnidentifiedSignal:1;
-		UINT8 Radar:1;
-		UINT8 Unmeasure:1;
-		UINT8 Rev:3;
-	} field;
-#endif // RT_BIG_ENDIAN //
-	UINT8 word;
-} MEASURE_BASIC_REPORT_MAP, *PMEASURE_BASIC_REPORT_MAP;
-
-typedef struct PACKED _MEASURE_BASIC_REPORT
-{
-	UINT8 ChNum;
-	UINT64 MeasureStartTime;
-	UINT16 MeasureDuration;
-	MEASURE_BASIC_REPORT_MAP Map;
-} MEASURE_BASIC_REPORT, *PMEASURE_BASIC_REPORT;
-
-typedef struct PACKED _MEASURE_CCA_REPORT
-{
-	UINT8 ChNum;
-	UINT64 MeasureStartTime;
-	UINT16 MeasureDuration;
-	UINT8 CCA_Busy_Fraction;
-} MEASURE_CCA_REPORT, *PMEASURE_CCA_REPORT;
-
-typedef struct PACKED _MEASURE_RPI_REPORT
-{
-	UINT8 ChNum;
-	UINT64 MeasureStartTime;
-	UINT16 MeasureDuration;
-	UINT8 RPI_Density[8];
-} MEASURE_RPI_REPORT, *PMEASURE_RPI_REPORT;
-
-typedef union PACKED _MEASURE_REPORT_MODE
-{
-	struct PACKED
-	{
-#ifdef RT_BIG_ENDIAN
-		UINT8 Rev:5;
-		UINT8 Refused:1;
-		UINT8 Incapable:1;
-		UINT8 Late:1;
-#else
-		UINT8 Late:1;
-		UINT8 Incapable:1;
-		UINT8 Refused:1;
-		UINT8 Rev:5;
-#endif // RT_BIG_ENDIAN //
-	} field;
-	UINT8 word;
-} MEASURE_REPORT_MODE, *PMEASURE_REPORT_MODE;
-
-typedef struct PACKED _MEASURE_REPORT_INFO
-{
-	UINT8 Token;
-	MEASURE_REPORT_MODE ReportMode;
-	UINT8 ReportType;
-	UINT8 Octect[0];
-} MEASURE_REPORT_INFO, *PMEASURE_REPORT_INFO;
-
-typedef struct PACKED _QUIET_INFO
-{
-	UINT8 QuietCnt;
-	UINT8 QuietPeriod;
-	UINT8 QuietDuration;
-	UINT8 QuietOffset;
-} QUIET_INFO, *PQUIET_INFO;
-
-/*
-	==========================================================================
-	Description:
-		Prepare Measurement request action frame and enqueue it into
-		management queue waiting for transmition.
-
-	Parametrs:
-		1. the destination mac address of the frame.
-
-	Return	: None.
-	==========================================================================
- */
-VOID EnqueueMeasurementReq(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pDA,
-	IN UINT8 MeasureToken,
-	IN UINT8 MeasureReqMode,
-	IN UINT8 MeasureReqType,
-	IN UINT8 MeasureCh,
-	IN UINT16 MeasureDuration);
-
-/*
-	==========================================================================
-	Description:
-		Prepare Measurement report action frame and enqueue it into
-		management queue waiting for transmition.
-
-	Parametrs:
-		1. the destination mac address of the frame.
-
-	Return	: None.
-	==========================================================================
- */
-VOID EnqueueMeasurementRep(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pDA,
-	IN UINT8 DialogToken,
-	IN UINT8 MeasureToken,
-	IN UINT8 MeasureReqMode,
-	IN UINT8 MeasureReqType,
-	IN UINT8 ReportInfoLen,
-	IN PUINT8 pReportInfo);
-
-/*
-	==========================================================================
-	Description:
-		Prepare TPC Request action frame and enqueue it into
-		management queue waiting for transmition.
-
-	Parametrs:
-		1. the destination mac address of the frame.
-
-	Return	: None.
-	==========================================================================
- */
-VOID EnqueueTPCReq(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pDA,
-	IN UCHAR DialogToken);
-
-/*
-	==========================================================================
-	Description:
-		Prepare TPC Report action frame and enqueue it into
-		management queue waiting for transmition.
-
-	Parametrs:
-		1. the destination mac address of the frame.
-
-	Return	: None.
-	==========================================================================
- */
-VOID EnqueueTPCRep(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pDA,
-	IN UINT8 DialogToken,
-	IN UINT8 TxPwr,
-	IN UINT8 LinkMargin);
-
-/*
-	==========================================================================
-	Description:
-		Prepare Channel Switch Announcement action frame and enqueue it into
-		management queue waiting for transmition.
-
-	Parametrs:
-		1. the destination mac address of the frame.
-		2. Channel switch announcement mode.
-		2. a New selected channel.
-
-	Return	: None.
-	==========================================================================
- */
-VOID EnqueueChSwAnn(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pDA,
-	IN UINT8 ChSwMode,
-	IN UINT8 NewCh);
-
-/*
-	==========================================================================
-	Description:
-		Spectrun action frames Handler such as channel switch annoucement,
-		measurement report, measurement request actions frames.
-
-	Parametrs:
-		Elme - MLME message containing the received frame
-
-	Return	: None.
-	==========================================================================
- */
-VOID PeerSpectrumAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
-
-/*
-	==========================================================================
-	Description:
-
-	Parametrs:
-
-	Return	: None.
-	==========================================================================
- */
-INT Set_MeasureReq_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_TpcReq_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-VOID MeasureReqTabInit(
-	IN PRTMP_ADAPTER pAd);
-
-VOID MeasureReqTabExit(
-	IN PRTMP_ADAPTER pAd);
-
-VOID TpcReqTabInit(
-	IN PRTMP_ADAPTER pAd);
-
-VOID TpcReqTabExit(
-	IN PRTMP_ADAPTER pAd);
-
-VOID NotifyChSwAnnToPeerAPs(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pRA,
-	IN PUCHAR pTA,
-	IN UINT8 ChSwMode,
-	IN UINT8 Channel);
-#endif // __SPECTRUM_H__ //
-
+#include "../rt2870/spectrum.h"
diff --git a/drivers/staging/rt3070/spectrum_def.h b/drivers/staging/rt3070/spectrum_def.h
index 4ca4817bba0..892bc88c65f 100644
--- a/drivers/staging/rt3070/spectrum_def.h
+++ b/drivers/staging/rt3070/spectrum_def.h
@@ -1,95 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-	spectrum_def.h
-
-    Abstract:
-    Handle association related requests either from WSTA or from local MLME
-
-    Revision History:
-    Who          When          What
-    ---------    ----------    ----------------------------------------------
-	Fonchi Wu    2008	  	   created for 802.11h
- */
-
-#ifndef __SPECTRUM_DEF_H__
-#define __SPECTRUM_DEF_H__
-
-#define MAX_MEASURE_REQ_TAB_SIZE		3
-#define MAX_HASH_MEASURE_REQ_TAB_SIZE	MAX_MEASURE_REQ_TAB_SIZE
-
-#define MAX_TPC_REQ_TAB_SIZE			3
-#define MAX_HASH_TPC_REQ_TAB_SIZE		MAX_TPC_REQ_TAB_SIZE
-
-#define MIN_RCV_PWR				100		/* Negative value ((dBm) */
-
-#define RM_TPC_REQ				0
-#define RM_MEASURE_REQ			1
-
-#define RM_BASIC				0
-#define RM_CCA					1
-#define RM_RPI_HISTOGRAM		2
-
-#define TPC_REQ_AGE_OUT			500		/* ms */
-#define MQ_REQ_AGE_OUT			500		/* ms */
-
-#define TPC_DIALOGTOKEN_HASH_INDEX(_DialogToken)	((_DialogToken) % MAX_HASH_TPC_REQ_TAB_SIZE)
-#define MQ_DIALOGTOKEN_HASH_INDEX(_DialogToken)		((_DialogToken) % MAX_MEASURE_REQ_TAB_SIZE)
-
-typedef struct _MEASURE_REQ_ENTRY
-{
-	struct _MEASURE_REQ_ENTRY *pNext;
-	ULONG lastTime;
-	BOOLEAN	Valid;
-	UINT8 DialogToken;
-	UINT8 MeasureDialogToken[3];	// 0:basic measure, 1: CCA measure, 2: RPI_Histogram measure.
-} MEASURE_REQ_ENTRY, *PMEASURE_REQ_ENTRY;
-
-typedef struct _MEASURE_REQ_TAB
-{
-	UCHAR Size;
-	PMEASURE_REQ_ENTRY Hash[MAX_HASH_MEASURE_REQ_TAB_SIZE];
-	MEASURE_REQ_ENTRY Content[MAX_MEASURE_REQ_TAB_SIZE];
-} MEASURE_REQ_TAB, *PMEASURE_REQ_TAB;
-
-typedef struct _TPC_REQ_ENTRY
-{
-	struct _TPC_REQ_ENTRY *pNext;
-	ULONG lastTime;
-	BOOLEAN Valid;
-	UINT8 DialogToken;
-} TPC_REQ_ENTRY, *PTPC_REQ_ENTRY;
-
-typedef struct _TPC_REQ_TAB
-{
-	UCHAR Size;
-	PTPC_REQ_ENTRY Hash[MAX_HASH_TPC_REQ_TAB_SIZE];
-	TPC_REQ_ENTRY Content[MAX_TPC_REQ_TAB_SIZE];
-} TPC_REQ_TAB, *PTPC_REQ_TAB;
-
-#endif // __SPECTRUM_DEF_H__ //
-
+#include "../rt2870/spectrum_def.h"
diff --git a/drivers/staging/rt3070/sta/aironet.c b/drivers/staging/rt3070/sta/aironet.c
index 4af4a190618..48fcc469527 100644
--- a/drivers/staging/rt3070/sta/aironet.c
+++ b/drivers/staging/rt3070/sta/aironet.c
@@ -1,1312 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	aironet.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Paul Lin	04-06-15		Initial
-*/
-#include "../rt_config.h"
-
-/*
-	==========================================================================
-	Description:
-		association	state machine init,	including state	transition and timer init
-	Parameters:
-		S -	pointer	to the association state machine
-	==========================================================================
- */
-VOID	AironetStateMachineInit(
-	IN	PRTMP_ADAPTER		pAd,
-	IN	STATE_MACHINE		*S,
-	OUT	STATE_MACHINE_FUNC	Trans[])
-{
-	StateMachineInit(S,	Trans, MAX_AIRONET_STATE, MAX_AIRONET_MSG, (STATE_MACHINE_FUNC)Drop, AIRONET_IDLE, AIRONET_MACHINE_BASE);
-	StateMachineSetAction(S, AIRONET_IDLE, MT2_AIRONET_MSG, (STATE_MACHINE_FUNC)AironetMsgAction);
-	StateMachineSetAction(S, AIRONET_IDLE, MT2_AIRONET_SCAN_REQ, (STATE_MACHINE_FUNC)AironetRequestAction);
-	StateMachineSetAction(S, AIRONET_SCANNING, MT2_AIRONET_SCAN_DONE, (STATE_MACHINE_FUNC)AironetReportAction);
-}
-
-/*
-	==========================================================================
-	Description:
-		This is	state machine function.
-		When receiving EAPOL packets which is  for 802.1x key management.
-		Use	both in	WPA, and WPAPSK	case.
-		In this	function, further dispatch to different	functions according	to the received	packet.	 3 categories are :
-		  1.  normal 4-way pairwisekey and 2-way groupkey handshake
-		  2.  MIC error	(Countermeasures attack)  report packet	from STA.
-		  3.  Request for pairwise/group key update	from STA
-	Return:
-	==========================================================================
-*/
-VOID	AironetMsgAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MLME_QUEUE_ELEM	*Elem)
-{
-	USHORT							Length;
-	UCHAR							Index, i;
-	PUCHAR							pData;
-	PAIRONET_RM_REQUEST_FRAME		pRMReq;
-	PRM_REQUEST_ACTION				pReqElem;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("-----> AironetMsgAction\n"));
-
-	// 0. Get Aironet IAPP header first
-	pRMReq = (PAIRONET_RM_REQUEST_FRAME) &Elem->Msg[LENGTH_802_11];
-	pData  = (PUCHAR) &Elem->Msg[LENGTH_802_11];
-
-	// 1. Change endian format form network to little endian
-	Length = be2cpu16(pRMReq->IAPP.Length);
-
-	// 2.0 Sanity check, this should only happen when CCX 2.0 support is enabled
-	if (pAd->StaCfg.CCXEnable != TRUE)
-		return;
-
-	// 2.1 Radio measurement must be on
-	if (pAd->StaCfg.CCXControl.field.RMEnable != 1)
-		return;
-
-	// 2.2. Debug print all bit information
-	DBGPRINT(RT_DEBUG_TRACE, ("IAPP ID & Length %d\n", Length));
-	DBGPRINT(RT_DEBUG_TRACE, ("IAPP Type %x\n", pRMReq->IAPP.Type));
-	DBGPRINT(RT_DEBUG_TRACE, ("IAPP SubType %x\n", pRMReq->IAPP.SubType));
-	DBGPRINT(RT_DEBUG_TRACE, ("IAPP Dialog Token %x\n", pRMReq->IAPP.Token));
-	DBGPRINT(RT_DEBUG_TRACE, ("IAPP Activation Delay %x\n", pRMReq->Delay));
-	DBGPRINT(RT_DEBUG_TRACE, ("IAPP Measurement Offset %x\n", pRMReq->Offset));
-
-	// 3. Check IAPP frame type, it must be 0x32 for Cisco Aironet extension
-	if (pRMReq->IAPP.Type != AIRONET_IAPP_TYPE)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("Wrong IAPP type for Cisco Aironet extension\n"));
-		return;
-	}
-
-	// 4. Check IAPP frame subtype, it must be 0x01 for Cisco Aironet extension request.
-	//    Since we are acting as client only, we will disregards reply subtype.
-	if (pRMReq->IAPP.SubType != AIRONET_IAPP_SUBTYPE_REQUEST)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("Wrong IAPP subtype for Cisco Aironet extension\n"));
-		return;
-	}
-
-	// 5. Verify Destination MAC and Source MAC, both should be all zeros.
-	if (! MAC_ADDR_EQUAL(pRMReq->IAPP.DA, ZERO_MAC_ADDR))
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("Wrong IAPP DA for Cisco Aironet extension, it's not Zero\n"));
-		return;
-	}
-
-	if (! MAC_ADDR_EQUAL(pRMReq->IAPP.SA, ZERO_MAC_ADDR))
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("Wrong IAPP SA for Cisco Aironet extension, it's not Zero\n"));
-		return;
-	}
-
-	// 6. Reinit all report related fields
-	NdisZeroMemory(pAd->StaCfg.FrameReportBuf, 2048);
-	NdisZeroMemory(pAd->StaCfg.BssReportOffset, sizeof(USHORT) * MAX_LEN_OF_BSS_TABLE);
-	NdisZeroMemory(pAd->StaCfg.MeasurementRequest, sizeof(RM_REQUEST_ACTION) * 4);
-
-	// 7. Point to the start of first element report element
-	pAd->StaCfg.FrameReportLen   = LENGTH_802_11 + sizeof(AIRONET_IAPP_HEADER);
-	DBGPRINT(RT_DEBUG_TRACE, ("FR len = %d\n", pAd->StaCfg.FrameReportLen));
-	pAd->StaCfg.LastBssIndex     = 0xff;
-	pAd->StaCfg.RMReqCnt         = 0;
-	pAd->StaCfg.ParallelReq      = FALSE;
-	pAd->StaCfg.ParallelDuration = 0;
-	pAd->StaCfg.ParallelChannel  = 0;
-	pAd->StaCfg.IAPPToken        = pRMReq->IAPP.Token;
-	pAd->StaCfg.CurrentRMReqIdx  = 0;
-	pAd->StaCfg.CLBusyBytes      = 0;
-	// Reset the statistics
-	for (i = 0; i < 8; i++)
-		pAd->StaCfg.RPIDensity[i] = 0;
-
-	Index = 0;
-
-	// 8. Save dialog token for report
-	pAd->StaCfg.IAPPToken = pRMReq->IAPP.Token;
-
-	// Save Activation delay & measurement offset, Not really needed
-
-	// 9. Point to the first request element
-	pData += sizeof(AIRONET_RM_REQUEST_FRAME);
-	//    Length should exclude the CISCO Aironet SNAP header
-	Length -= (sizeof(AIRONET_RM_REQUEST_FRAME) - LENGTH_802_1_H);
-
-	// 10. Start Parsing the Measurement elements.
-	//    Be careful about multiple MR elements within one frames.
-	while (Length > 0)
-	{
-		pReqElem = (PRM_REQUEST_ACTION) pData;
-		switch (pReqElem->ReqElem.Eid)
-		{
-			case IE_MEASUREMENT_REQUEST:
-				// From the example, it seems we only need to support one request in one frame
-				// There is no multiple request in one frame.
-				// Besides, looks like we need to take care the measurement request only.
-				// The measurement request is always 4 bytes.
-
-				// Start parsing this type of request.
-				// 0. Eid is IE_MEASUREMENT_REQUEST
-				// 1. Length didn't include Eid and Length field, it always be 8.
-				// 2. Measurement Token, we nned to save it for the corresponding report.
-				// 3. Measurement Mode, Although there are definitions, but we din't see value other than
-				//    0 from test specs examples.
-				// 4. Measurement Type, this is what we need to do.
-				switch (pReqElem->ReqElem.Type)
-				{
-					case MSRN_TYPE_CHANNEL_LOAD_REQ:
-					case MSRN_TYPE_NOISE_HIST_REQ:
-					case MSRN_TYPE_BEACON_REQ:
-						// Check the Enable non-serving channel measurement control
-						if (pAd->StaCfg.CCXControl.field.DCRMEnable == 0)
-						{
-							// Check channel before enqueue the action
-							if (pReqElem->Measurement.Channel != pAd->CommonCfg.Channel)
-								break;
-						}
-						else
-						{
-							// If off channel measurement, check the TU duration limit
-							if (pReqElem->Measurement.Channel != pAd->CommonCfg.Channel)
-								if (pReqElem->Measurement.Duration > pAd->StaCfg.CCXControl.field.TuLimit)
-									break;
-						}
-
-						// Save requests and execute actions later
-						NdisMoveMemory(&pAd->StaCfg.MeasurementRequest[Index], pReqElem, sizeof(RM_REQUEST_ACTION));
-						Index += 1;
-						break;
-
-					case MSRN_TYPE_FRAME_REQ:
-						// Since it's option, we will support later
-						// FrameRequestAction(pAd, pData);
-						break;
-
-					default:
-						break;
-				}
-
-				// Point to next Measurement request
-				pData  += sizeof(RM_REQUEST_ACTION);
-				Length -= sizeof(RM_REQUEST_ACTION);
-				break;
-
-			// We accept request only, all others are dropped
-			case IE_MEASUREMENT_REPORT:
-			case IE_AP_TX_POWER:
-			case IE_MEASUREMENT_CAPABILITY:
-			default:
-				return;
-		}
-	}
-
-	// 11. Update some flags and index
-	pAd->StaCfg.RMReqCnt = Index;
-
-	if (Index)
-	{
-		MlmeEnqueue(pAd, AIRONET_STATE_MACHINE, MT2_AIRONET_SCAN_REQ, 0, NULL);
-		RT28XX_MLME_HANDLER(pAd);
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<----- AironetMsgAction\n"));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	AironetRequestAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MLME_QUEUE_ELEM	*Elem)
-{
-	PRM_REQUEST_ACTION	pReq;
-
-	// 1. Point to next request element
-	pReq = (PRM_REQUEST_ACTION) &pAd->StaCfg.MeasurementRequest[pAd->StaCfg.CurrentRMReqIdx];
-
-	// 2. Parse measurement type and call appropriate functions
-	if (pReq->ReqElem.Type == MSRN_TYPE_CHANNEL_LOAD_REQ)
-		// Channel Load measurement request
-		ChannelLoadRequestAction(pAd, pAd->StaCfg.CurrentRMReqIdx);
-	else if (pReq->ReqElem.Type == MSRN_TYPE_NOISE_HIST_REQ)
-		// Noise Histogram measurement request
-		NoiseHistRequestAction(pAd, pAd->StaCfg.CurrentRMReqIdx);
-	else if (pReq->ReqElem.Type == MSRN_TYPE_BEACON_REQ)
-		// Beacon measurement request
-		BeaconRequestAction(pAd, pAd->StaCfg.CurrentRMReqIdx);
-	else
-		// Unknown. Do nothing and return, this should never happen
-		return;
-
-	// 3. Peek into the next request, if it's parallel, we will update the scan time to the largest one
-	if ((pAd->StaCfg.CurrentRMReqIdx + 1) < pAd->StaCfg.RMReqCnt)
-	{
-		pReq = (PRM_REQUEST_ACTION) &pAd->StaCfg.MeasurementRequest[pAd->StaCfg.CurrentRMReqIdx + 1];
-		// Check for parallel bit
-		if ((pReq->ReqElem.Mode & 0x01) && (pReq->Measurement.Channel == pAd->StaCfg.CCXScanChannel))
-		{
-			// Update parallel mode request information
-			pAd->StaCfg.ParallelReq = TRUE;
-			pAd->StaCfg.CCXScanTime = ((pReq->Measurement.Duration > pAd->StaCfg.CCXScanTime) ?
-			(pReq->Measurement.Duration) : (pAd->StaCfg.CCXScanTime));
-		}
-	}
-
-	// 4. Call RT28XX_MLME_HANDLER to execute the request mlme commands, Scan request is the only one used
-	RT28XX_MLME_HANDLER(pAd);
-
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Prepare channel load report action, special scan operation added
-		to support
-
-	Arguments:
-		pAd	Pointer	to our adapter
-		pData		Start from element ID
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	ChannelLoadRequestAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			Index)
-{
-	PRM_REQUEST_ACTION				pReq;
-	MLME_SCAN_REQ_STRUCT			ScanReq;
-	UCHAR							ZeroSsid[32];
-	NDIS_STATUS						NStatus;
-	PUCHAR							pOutBuffer = NULL;
-	PHEADER_802_11					pNullFrame;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("ChannelLoadRequestAction ----->\n"));
-
-	pReq = (PRM_REQUEST_ACTION) &pAd->StaCfg.MeasurementRequest[Index];
-	NdisZeroMemory(ZeroSsid, 32);
-
-	// Prepare for special scan request
-	// The scan definition is different with our Active, Passive scan definition.
-	// For CCX2, Active means send out probe request with broadcast BSSID.
-	// Passive means no probe request sent, only listen to the beacons.
-	// The channel scanned is fixed as specified, no need to scan all channels.
-	// The scan wait time is specified in the request too.
-	// Passive scan Mode
-
-	// Control state machine is not idle, reject the request
-	if ((pAd->Mlme.CntlMachine.CurrState != CNTL_IDLE) && (Index == 0))
-		return;
-
-	// Fill out stuff for scan request
-	ScanParmFill(pAd, &ScanReq, ZeroSsid, 0, BSS_ANY, SCAN_CISCO_CHANNEL_LOAD);
-	MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_SCAN_REQ, sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq);
-	pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_LIST_SCAN;
-
-	// Reset some internal control flags to make sure this scan works.
-	BssTableInit(&pAd->StaCfg.CCXBssTab);
-	pAd->StaCfg.ScanCnt        = 0;
-	pAd->StaCfg.CCXScanChannel = pReq->Measurement.Channel;
-	pAd->StaCfg.CCXScanTime    = pReq->Measurement.Duration;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Duration %d, Channel %d!\n", pReq->Measurement.Duration, pReq->Measurement.Channel));
-
-	// If it's non serving channel scan, send out a null frame with PSM bit on.
-	if (pAd->StaCfg.CCXScanChannel != pAd->CommonCfg.Channel)
-	{
-		// Use MLME enqueue method
-		NStatus = MlmeAllocateMemory(pAd, (PVOID)&pOutBuffer);  //Get an unused nonpaged memory
-		if (NStatus	!= NDIS_STATUS_SUCCESS)
-			return;
-
-		pNullFrame = (PHEADER_802_11) pOutBuffer;;
-		// Make the power save Null frame with PSM bit on
-		MgtMacHeaderInit(pAd, pNullFrame, SUBTYPE_NULL_FUNC, 1, pAd->CommonCfg.Bssid, pAd->CommonCfg.Bssid);
-		pNullFrame->Duration 	= 0;
-		pNullFrame->FC.Type 	= BTYPE_DATA;
-		pNullFrame->FC.PwrMgmt	= PWR_SAVE;
-
-		// Send using priority queue
-		MiniportMMRequest(pAd, 0, pOutBuffer, sizeof(HEADER_802_11));
-		MlmeFreeMemory(pAd, pOutBuffer);
-		DBGPRINT(RT_DEBUG_TRACE, ("Send PSM Data frame for off channel RM\n"));
-		RTMPusecDelay(5000);
-	}
-
-	pAd->StaCfg.CCXReqType     = MSRN_TYPE_CHANNEL_LOAD_REQ;
-	pAd->StaCfg.CLBusyBytes    = 0;
-	// Enable Rx with promiscuous reception
-	RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, 0x1010);
-
-	// Set channel load measurement flag
-	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_MEASUREMENT);
-
-	pAd->Mlme.AironetMachine.CurrState = AIRONET_SCANNING;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("ChannelLoadRequestAction <-----\n"));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Prepare noise histogram report action, special scan operation added
-		to support
-
-	Arguments:
-		pAd	Pointer	to our adapter
-		pData		Start from element ID
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	NoiseHistRequestAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			Index)
-{
-	PRM_REQUEST_ACTION				pReq;
-	MLME_SCAN_REQ_STRUCT			ScanReq;
-	UCHAR							ZeroSsid[32], i;
-	NDIS_STATUS						NStatus;
-	PUCHAR							pOutBuffer = NULL;
-	PHEADER_802_11					pNullFrame;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("NoiseHistRequestAction ----->\n"));
-
-	pReq = (PRM_REQUEST_ACTION) &pAd->StaCfg.MeasurementRequest[Index];
-	NdisZeroMemory(ZeroSsid, 32);
-
-	// Prepare for special scan request
-	// The scan definition is different with our Active, Passive scan definition.
-	// For CCX2, Active means send out probe request with broadcast BSSID.
-	// Passive means no probe request sent, only listen to the beacons.
-	// The channel scanned is fixed as specified, no need to scan all channels.
-	// The scan wait time is specified in the request too.
-	// Passive scan Mode
-
-	// Control state machine is not idle, reject the request
-	if ((pAd->Mlme.CntlMachine.CurrState != CNTL_IDLE) && (Index == 0))
-		return;
-
-	// Fill out stuff for scan request
-	ScanParmFill(pAd, &ScanReq, ZeroSsid, 0, BSS_ANY, SCAN_CISCO_NOISE);
-	MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_SCAN_REQ, sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq);
-	pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_LIST_SCAN;
-
-	// Reset some internal control flags to make sure this scan works.
-	BssTableInit(&pAd->StaCfg.CCXBssTab);
-	pAd->StaCfg.ScanCnt        = 0;
-	pAd->StaCfg.CCXScanChannel = pReq->Measurement.Channel;
-	pAd->StaCfg.CCXScanTime    = pReq->Measurement.Duration;
-	pAd->StaCfg.CCXReqType     = MSRN_TYPE_NOISE_HIST_REQ;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Duration %d, Channel %d!\n", pReq->Measurement.Duration, pReq->Measurement.Channel));
-
-	// If it's non serving channel scan, send out a null frame with PSM bit on.
-	if (pAd->StaCfg.CCXScanChannel != pAd->CommonCfg.Channel)
-	{
-		// Use MLME enqueue method
-		NStatus = MlmeAllocateMemory(pAd, (PVOID)&pOutBuffer);  //Get an unused nonpaged memory
-		if (NStatus	!= NDIS_STATUS_SUCCESS)
-			return;
-
-		pNullFrame = (PHEADER_802_11) pOutBuffer;
-		// Make the power save Null frame with PSM bit on
-		MgtMacHeaderInit(pAd, pNullFrame, SUBTYPE_NULL_FUNC, 1, pAd->CommonCfg.Bssid, pAd->CommonCfg.Bssid);
-		pNullFrame->Duration 	= 0;
-		pNullFrame->FC.Type  	= BTYPE_DATA;
-		pNullFrame->FC.PwrMgmt	= PWR_SAVE;
-
-		// Send using priority queue
-		MiniportMMRequest(pAd, 0, pOutBuffer, sizeof(HEADER_802_11));
-		MlmeFreeMemory(pAd, pOutBuffer);
-		DBGPRINT(RT_DEBUG_TRACE, ("Send PSM Data frame for off channel RM\n"));
-		RTMPusecDelay(5000);
-	}
-
-	// Reset the statistics
-	for (i = 0; i < 8; i++)
-		pAd->StaCfg.RPIDensity[i] = 0;
-
-	// Enable Rx with promiscuous reception
-	RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, 0x1010);
-
-	// Set channel load measurement flag
-	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_MEASUREMENT);
-
-	pAd->Mlme.AironetMachine.CurrState = AIRONET_SCANNING;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("NoiseHistRequestAction <-----\n"));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Prepare Beacon report action, special scan operation added
-		to support
-
-	Arguments:
-		pAd	Pointer	to our adapter
-		pData		Start from element ID
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	BeaconRequestAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			Index)
-{
-	PRM_REQUEST_ACTION				pReq;
-	NDIS_STATUS						NStatus;
-	PUCHAR							pOutBuffer = NULL;
-	PHEADER_802_11					pNullFrame;
-	MLME_SCAN_REQ_STRUCT			ScanReq;
-	UCHAR							ZeroSsid[32];
-
-	DBGPRINT(RT_DEBUG_TRACE, ("BeaconRequestAction ----->\n"));
-
-	pReq = (PRM_REQUEST_ACTION) &pAd->StaCfg.MeasurementRequest[Index];
-	NdisZeroMemory(ZeroSsid, 32);
-
-	// Prepare for special scan request
-	// The scan definition is different with our Active, Passive scan definition.
-	// For CCX2, Active means send out probe request with broadcast BSSID.
-	// Passive means no probe request sent, only listen to the beacons.
-	// The channel scanned is fixed as specified, no need to scan all channels.
-	// The scan wait time is specified in the request too.
-	if (pReq->Measurement.ScanMode == MSRN_SCAN_MODE_PASSIVE)
-	{
-		// Passive scan Mode
-		DBGPRINT(RT_DEBUG_TRACE, ("Passive Scan Mode!\n"));
-
-		// Control state machine is not idle, reject the request
-		if ((pAd->Mlme.CntlMachine.CurrState != CNTL_IDLE) && (Index == 0))
-			return;
-
-		// Fill out stuff for scan request
-		ScanParmFill(pAd, &ScanReq, ZeroSsid, 0, BSS_ANY, SCAN_CISCO_PASSIVE);
-		MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_SCAN_REQ, sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq);
-		pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_LIST_SCAN;
-
-		// Reset some internal control flags to make sure this scan works.
-		BssTableInit(&pAd->StaCfg.CCXBssTab);
-		pAd->StaCfg.ScanCnt        = 0;
-		pAd->StaCfg.CCXScanChannel = pReq->Measurement.Channel;
-		pAd->StaCfg.CCXScanTime    = pReq->Measurement.Duration;
-		pAd->StaCfg.CCXReqType     = MSRN_TYPE_BEACON_REQ;
-		DBGPRINT(RT_DEBUG_TRACE, ("Duration %d!\n", pReq->Measurement.Duration));
-
-		// If it's non serving channel scan, send out a null frame with PSM bit on.
-		if (pAd->StaCfg.CCXScanChannel != pAd->CommonCfg.Channel)
-		{
-			// Use MLME enqueue method
-			NStatus = MlmeAllocateMemory(pAd, (PVOID)&pOutBuffer);  //Get an unused nonpaged memory
-			if (NStatus	!= NDIS_STATUS_SUCCESS)
-				return;
-
-			pNullFrame = (PHEADER_802_11) pOutBuffer;
-			// Make the power save Null frame with PSM bit on
-			MgtMacHeaderInit(pAd, pNullFrame, SUBTYPE_NULL_FUNC, 1, pAd->CommonCfg.Bssid, pAd->CommonCfg.Bssid);
-			pNullFrame->Duration 	= 0;
-			pNullFrame->FC.Type     = BTYPE_DATA;
-			pNullFrame->FC.PwrMgmt  = PWR_SAVE;
-
-			// Send using priority queue
-			MiniportMMRequest(pAd, 0, pOutBuffer, sizeof(HEADER_802_11));
-			MlmeFreeMemory(pAd, pOutBuffer);
-			DBGPRINT(RT_DEBUG_TRACE, ("Send PSM Data frame for off channel RM\n"));
-			RTMPusecDelay(5000);
-		}
-
-		pAd->Mlme.AironetMachine.CurrState = AIRONET_SCANNING;
-	}
-	else if (pReq->Measurement.ScanMode == MSRN_SCAN_MODE_ACTIVE)
-	{
-		// Active scan Mode
-		DBGPRINT(RT_DEBUG_TRACE, ("Active Scan Mode!\n"));
-
-		// Control state machine is not idle, reject the request
-		if (pAd->Mlme.CntlMachine.CurrState != CNTL_IDLE)
-			return;
-
-		// Fill out stuff for scan request
-		ScanParmFill(pAd, &ScanReq, ZeroSsid, 0, BSS_ANY, SCAN_CISCO_ACTIVE);
-		MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_SCAN_REQ, sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq);
-		pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_LIST_SCAN;
-
-		// Reset some internal control flags to make sure this scan works.
-		BssTableInit(&pAd->StaCfg.CCXBssTab);
-		pAd->StaCfg.ScanCnt        = 0;
-		pAd->StaCfg.CCXScanChannel = pReq->Measurement.Channel;
-		pAd->StaCfg.CCXScanTime    = pReq->Measurement.Duration;
-		pAd->StaCfg.CCXReqType     = MSRN_TYPE_BEACON_REQ;
-		DBGPRINT(RT_DEBUG_TRACE, ("Duration %d!\n", pReq->Measurement.Duration));
-
-		// If it's non serving channel scan, send out a null frame with PSM bit on.
-		if (pAd->StaCfg.CCXScanChannel != pAd->CommonCfg.Channel)
-		{
-			// Use MLME enqueue method
-			NStatus = MlmeAllocateMemory(pAd, (PVOID)&pOutBuffer);  //Get an unused nonpaged memory
-			if (NStatus	!= NDIS_STATUS_SUCCESS)
-				return;
-
-			pNullFrame = (PHEADER_802_11) pOutBuffer;
-			// Make the power save Null frame with PSM bit on
-			MgtMacHeaderInit(pAd, pNullFrame, SUBTYPE_NULL_FUNC, 1, pAd->CommonCfg.Bssid, pAd->CommonCfg.Bssid);
-			pNullFrame->Duration 	= 0;
-			pNullFrame->FC.Type     = BTYPE_DATA;
-			pNullFrame->FC.PwrMgmt  = PWR_SAVE;
-
-			// Send using priority queue
-			MiniportMMRequest(pAd, 0, pOutBuffer, sizeof(HEADER_802_11));
-			MlmeFreeMemory(pAd, pOutBuffer);
-			DBGPRINT(RT_DEBUG_TRACE, ("Send PSM Data frame for off channel RM\n"));
-			RTMPusecDelay(5000);
-		}
-
-		pAd->Mlme.AironetMachine.CurrState = AIRONET_SCANNING;
-	}
-	else if (pReq->Measurement.ScanMode == MSRN_SCAN_MODE_BEACON_TABLE)
-	{
-		// Beacon report Mode, report all the APS in current bss table
-		DBGPRINT(RT_DEBUG_TRACE, ("Beacon Report Mode!\n"));
-
-		// Copy current BSS table to CCX table, we can omit this step later on.
-		NdisMoveMemory(&pAd->StaCfg.CCXBssTab, &pAd->ScanTab, sizeof(BSS_TABLE));
-
-		// Create beacon report from Bss table
-		AironetCreateBeaconReportFromBssTable(pAd);
-
-		// Set state to scanning
-		pAd->Mlme.AironetMachine.CurrState = AIRONET_SCANNING;
-
-		// Enqueue report request
-		// Cisco scan request is finished, prepare beacon report
-		MlmeEnqueue(pAd, AIRONET_STATE_MACHINE, MT2_AIRONET_SCAN_DONE, 0, NULL);
-	}
-	else
-	{
-		// Wrong scan Mode
-		DBGPRINT(RT_DEBUG_TRACE, ("Wrong Scan Mode!\n"));
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("BeaconRequestAction <-----\n"));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	AironetReportAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MLME_QUEUE_ELEM	*Elem)
-{
-	PRM_REQUEST_ACTION	pReq;
-	ULONG				Now32;
-
-    NdisGetSystemUpTime(&Now32);
-	pAd->StaCfg.LastBeaconRxTime = Now32;
-
-	pReq = (PRM_REQUEST_ACTION) &pAd->StaCfg.MeasurementRequest[pAd->StaCfg.CurrentRMReqIdx];
-
-	DBGPRINT(RT_DEBUG_TRACE, ("AironetReportAction ----->\n"));
-
-	// 1. Parse measurement type and call appropriate functions
-	if (pReq->ReqElem.Type == MSRN_TYPE_CHANNEL_LOAD_REQ)
-		// Channel Load measurement request
-		ChannelLoadReportAction(pAd, pAd->StaCfg.CurrentRMReqIdx);
-	else if (pReq->ReqElem.Type == MSRN_TYPE_NOISE_HIST_REQ)
-		// Noise Histogram measurement request
-		NoiseHistReportAction(pAd, pAd->StaCfg.CurrentRMReqIdx);
-	else if (pReq->ReqElem.Type == MSRN_TYPE_BEACON_REQ)
-		// Beacon measurement request
-		BeaconReportAction(pAd, pAd->StaCfg.CurrentRMReqIdx);
-	else
-		// Unknown. Do nothing and return
-		;
-
-	// 2. Point to the correct index of action element, start from 0
-	pAd->StaCfg.CurrentRMReqIdx++;
-
-	// 3. Check for parallel actions
-	if (pAd->StaCfg.ParallelReq == TRUE)
-	{
-		pReq = (PRM_REQUEST_ACTION) &pAd->StaCfg.MeasurementRequest[pAd->StaCfg.CurrentRMReqIdx];
-
-		// Process next action right away
-		if (pReq->ReqElem.Type == MSRN_TYPE_CHANNEL_LOAD_REQ)
-			// Channel Load measurement request
-			ChannelLoadReportAction(pAd, pAd->StaCfg.CurrentRMReqIdx);
-		else if (pReq->ReqElem.Type == MSRN_TYPE_NOISE_HIST_REQ)
-			// Noise Histogram measurement request
-			NoiseHistReportAction(pAd, pAd->StaCfg.CurrentRMReqIdx);
-
-		pAd->StaCfg.ParallelReq = FALSE;
-		pAd->StaCfg.CurrentRMReqIdx++;
-	}
-
-	if (pAd->StaCfg.CurrentRMReqIdx >= pAd->StaCfg.RMReqCnt)
-	{
-		// 4. There is no more unprocessed measurement request, go for transmit this report
-		AironetFinalReportAction(pAd);
-		pAd->Mlme.AironetMachine.CurrState = AIRONET_IDLE;
-	}
-	else
-	{
-		pReq = (PRM_REQUEST_ACTION) &pAd->StaCfg.MeasurementRequest[pAd->StaCfg.CurrentRMReqIdx];
-
-		if (pReq->Measurement.Channel != pAd->CommonCfg.Channel)
-		{
-			RTMPusecDelay(100000);
-		}
-
-		// 5. There are more requests to be measure
-		MlmeEnqueue(pAd, AIRONET_STATE_MACHINE, MT2_AIRONET_SCAN_REQ, 0, NULL);
-		RT28XX_MLME_HANDLER(pAd);
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("AironetReportAction <-----\n"));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	AironetFinalReportAction(
-	IN	PRTMP_ADAPTER	pAd)
-{
-	PUCHAR					pDest;
-	PAIRONET_IAPP_HEADER	pIAPP;
-	PHEADER_802_11			pHeader;
-	UCHAR					AckRate = RATE_2;
-	USHORT					AckDuration = 0;
-	NDIS_STATUS				NStatus;
-	PUCHAR					pOutBuffer = NULL;
-	ULONG					FrameLen = 0;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("AironetFinalReportAction ----->\n"));
-
-	// 0. Set up the frame pointer, Frame was inited at the end of message action
-	pDest = &pAd->StaCfg.FrameReportBuf[LENGTH_802_11];
-
-	// 1. Update report IAPP fields
-	pIAPP = (PAIRONET_IAPP_HEADER) pDest;
-
-	// 2. Copy Cisco SNAP header
-	NdisMoveMemory(pIAPP->CiscoSnapHeader, SNAP_AIRONET, LENGTH_802_1_H);
-
-	// 3. network order for this 16bit length
-	pIAPP->Length  = cpu2be16(pAd->StaCfg.FrameReportLen - LENGTH_802_11 - LENGTH_802_1_H);
-
-	// 3.1 sanity check the report length, ignore it if there is nothing to report
-	if (be2cpu16(pIAPP->Length) <= 18)
-		return;
-
-	// 4. Type must be 0x32
-	pIAPP->Type    = AIRONET_IAPP_TYPE;
-
-	// 5. SubType for report must be 0x81
-	pIAPP->SubType = AIRONET_IAPP_SUBTYPE_REPORT;
-
-	// 6. DA is not used and must be zero, although the whole frame was cleared at the start of function
-	//    We will do it again here. We can use BSSID instead
-	COPY_MAC_ADDR(pIAPP->DA, pAd->CommonCfg.Bssid);
-
-	// 7. SA is the client reporting which must be our MAC
-	COPY_MAC_ADDR(pIAPP->SA, pAd->CurrentAddress);
-
-	// 8. Copy the saved dialog token
-	pIAPP->Token = pAd->StaCfg.IAPPToken;
-
-	// 9. Make the Report frame 802.11 header
-	//    Reuse function in wpa.c
-	pHeader = (PHEADER_802_11) pAd->StaCfg.FrameReportBuf;
-	pAd->Sequence ++;
-	WpaMacHeaderInit(pAd, pHeader, 0, pAd->CommonCfg.Bssid);
-
-	// ACK size	is 14 include CRC, and its rate	is based on real time information
-	AckRate     = pAd->CommonCfg.ExpectedACKRate[pAd->CommonCfg.MlmeRate];
-	AckDuration = RTMPCalcDuration(pAd, AckRate, 14);
-	pHeader->Duration = pAd->CommonCfg.Dsifs + AckDuration;
-
-	// Use MLME enqueue method
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-	if (NStatus	!= NDIS_STATUS_SUCCESS)
-		return;
-
-	// 10. Prepare report frame with dynamic outbuffer. Just simply copy everything.
-	MakeOutgoingFrame(pOutBuffer,                       &FrameLen,
-	                  pAd->StaCfg.FrameReportLen, pAd->StaCfg.FrameReportBuf,
-		              END_OF_ARGS);
-
-	// 11. Send using priority queue
-	MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-	pAd->StaCfg.CCXReqType = MSRN_TYPE_UNUSED;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("AironetFinalReportAction <-----\n"));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	ChannelLoadReportAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			Index)
-{
-	PMEASUREMENT_REPORT_ELEMENT	pReport;
-	PCHANNEL_LOAD_REPORT		pLoad;
-	PUCHAR						pDest;
-	UCHAR						CCABusyFraction;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("ChannelLoadReportAction ----->\n"));
-
-	// Disable Rx with promiscuous reception, make it back to normal
-	RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, STANORMAL); // Staion not drop control frame will fail WiFi Certification.
-
-	// 0. Setup pointer for processing beacon & probe response
-	pDest = (PUCHAR) &pAd->StaCfg.FrameReportBuf[pAd->StaCfg.FrameReportLen];
-	pReport = (PMEASUREMENT_REPORT_ELEMENT) pDest;
-
-	// 1. Fill Measurement report element field.
-	pReport->Eid    = IE_MEASUREMENT_REPORT;
-	// Fixed Length at 9, not include Eid and length fields
-	pReport->Length = 9;
-	pReport->Token  = pAd->StaCfg.MeasurementRequest[Index].ReqElem.Token;
-	pReport->Mode   = pAd->StaCfg.MeasurementRequest[Index].ReqElem.Mode;
-	pReport->Type   = MSRN_TYPE_CHANNEL_LOAD_REQ;
-
-	// 2. Fill channel report measurement data
-	pDest += sizeof(MEASUREMENT_REPORT_ELEMENT);
-	pLoad  = (PCHANNEL_LOAD_REPORT) pDest;
-	pLoad->Channel  = pAd->StaCfg.MeasurementRequest[Index].Measurement.Channel;
-	pLoad->Spare    = 0;
-	pLoad->Duration = pAd->StaCfg.MeasurementRequest[Index].Measurement.Duration;
-
-	// 3. Calculate the CCA Busy Fraction
-	//    (Bytes + ACK size) * 8 / Tx speed * 255 / 1000 / measurement duration, use 24 us Tx speed
-	//     =  (Bytes + ACK) / 12 / duration
-	//     9 is the good value for pAd->StaCfg.CLFactor
-	// CCABusyFraction = (UCHAR) (pAd->StaCfg.CLBusyBytes / 9 / pLoad->Duration);
-	CCABusyFraction = (UCHAR) (pAd->StaCfg.CLBusyBytes / pAd->StaCfg.CLFactor / pLoad->Duration);
-	if (CCABusyFraction < 10)
-			CCABusyFraction = (UCHAR) (pAd->StaCfg.CLBusyBytes / 3 / pLoad->Duration) + 1;
-
-	pLoad->CCABusy = CCABusyFraction;
-	DBGPRINT(RT_DEBUG_TRACE, ("CLBusyByte %ld, Duration %d, Result, %d\n", pAd->StaCfg.CLBusyBytes, pLoad->Duration, CCABusyFraction));
-
-	DBGPRINT(RT_DEBUG_TRACE, ("FrameReportLen %d\n", pAd->StaCfg.FrameReportLen));
-	pAd->StaCfg.FrameReportLen += (sizeof(MEASUREMENT_REPORT_ELEMENT) + sizeof(CHANNEL_LOAD_REPORT));
-	DBGPRINT(RT_DEBUG_TRACE, ("FrameReportLen %d\n", pAd->StaCfg.FrameReportLen));
-
-	// 4. Clear channel load measurement flag
-	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RADIO_MEASUREMENT);
-
-	// 5. reset to idle state
-	pAd->Mlme.AironetMachine.CurrState = AIRONET_IDLE;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("ChannelLoadReportAction <-----\n"));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	NoiseHistReportAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			Index)
-{
-	PMEASUREMENT_REPORT_ELEMENT	pReport;
-	PNOISE_HIST_REPORT			pNoise;
-	PUCHAR						pDest;
-	UCHAR						i,NoiseCnt;
-	USHORT						TotalRPICnt, TotalRPISum;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("NoiseHistReportAction ----->\n"));
-
-	// 0. Disable Rx with promiscuous reception, make it back to normal
-	RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, STANORMAL); // Staion not drop control frame will fail WiFi Certification.
-	// 1. Setup pointer for processing beacon & probe response
-	pDest = (PUCHAR) &pAd->StaCfg.FrameReportBuf[pAd->StaCfg.FrameReportLen];
-	pReport = (PMEASUREMENT_REPORT_ELEMENT) pDest;
-
-	// 2. Fill Measurement report element field.
-	pReport->Eid    = IE_MEASUREMENT_REPORT;
-	// Fixed Length at 16, not include Eid and length fields
-	pReport->Length = 16;
-	pReport->Token  = pAd->StaCfg.MeasurementRequest[Index].ReqElem.Token;
-	pReport->Mode   = pAd->StaCfg.MeasurementRequest[Index].ReqElem.Mode;
-	pReport->Type   = MSRN_TYPE_NOISE_HIST_REQ;
-
-	// 3. Fill noise histogram report measurement data
-	pDest += sizeof(MEASUREMENT_REPORT_ELEMENT);
-	pNoise  = (PNOISE_HIST_REPORT) pDest;
-	pNoise->Channel  = pAd->StaCfg.MeasurementRequest[Index].Measurement.Channel;
-	pNoise->Spare    = 0;
-	pNoise->Duration = pAd->StaCfg.MeasurementRequest[Index].Measurement.Duration;
-	// 4. Fill Noise histogram, the total RPI counts should be 0.4 * TU
-	//    We estimate 4000 normal packets received durning 10 seconds test.
-	//    Adjust it if required.
-	// 3 is a good value for pAd->StaCfg.NHFactor
-	// TotalRPICnt = pNoise->Duration * 3 / 10;
-	TotalRPICnt = pNoise->Duration * pAd->StaCfg.NHFactor / 10;
-	TotalRPISum = 0;
-
-	for (i = 0; i < 8; i++)
-	{
-		TotalRPISum += pAd->StaCfg.RPIDensity[i];
-		DBGPRINT(RT_DEBUG_TRACE, ("RPI %d Conuts %d\n", i, pAd->StaCfg.RPIDensity[i]));
-	}
-
-	// Double check if the counter is larger than our expectation.
-	// We will replace it with the total number plus a fraction.
-	if (TotalRPISum > TotalRPICnt)
-		TotalRPICnt = TotalRPISum + pNoise->Duration / 20;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Total RPI Conuts %d\n", TotalRPICnt));
-
-	// 5. Initialize noise count for the total summation of 0xff
-	NoiseCnt = 0;
-	for (i = 1; i < 8; i++)
-	{
-		pNoise->Density[i] = (UCHAR) (pAd->StaCfg.RPIDensity[i] * 255 / TotalRPICnt);
-		if ((pNoise->Density[i] == 0) && (pAd->StaCfg.RPIDensity[i] != 0))
-			pNoise->Density[i]++;
-		NoiseCnt += pNoise->Density[i];
-		DBGPRINT(RT_DEBUG_TRACE, ("Reported RPI[%d]  = 0x%02x\n", i, pNoise->Density[i]));
-	}
-
-	// 6. RPI[0] represents the rest of counts
-	pNoise->Density[0] = 0xff - NoiseCnt;
-	DBGPRINT(RT_DEBUG_TRACE, ("Reported RPI[0]  = 0x%02x\n", pNoise->Density[0]));
-
-	pAd->StaCfg.FrameReportLen += (sizeof(MEASUREMENT_REPORT_ELEMENT) + sizeof(NOISE_HIST_REPORT));
-
-	// 7. Clear channel load measurement flag
-	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RADIO_MEASUREMENT);
-
-	// 8. reset to idle state
-	pAd->Mlme.AironetMachine.CurrState = AIRONET_IDLE;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("NoiseHistReportAction <-----\n"));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Prepare Beacon report action,
-
-	Arguments:
-		pAd	Pointer	to our adapter
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	BeaconReportAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			Index)
-{
-	DBGPRINT(RT_DEBUG_TRACE, ("BeaconReportAction ----->\n"));
-
-	// Looks like we don't have anything thing need to do here.
-	// All measurement report already finished in AddBeaconReport
-	// The length is in the FrameReportLen
-
-	// reset Beacon index for next beacon request
-	pAd->StaCfg.LastBssIndex = 0xff;
-
-	// reset to idle state
-	pAd->Mlme.AironetMachine.CurrState = AIRONET_IDLE;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("BeaconReportAction <-----\n"));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-		Index		Current BSSID in CCXBsstab entry index
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-VOID	AironetAddBeaconReport(
-	IN	PRTMP_ADAPTER		pAd,
-	IN	ULONG				Index,
-	IN	PMLME_QUEUE_ELEM	pElem)
-{
-	PVOID						pMsg;
-	PUCHAR						pSrc, pDest;
-	UCHAR						ReqIdx;
-	ULONG						MsgLen;
-	USHORT						Length;
-	PFRAME_802_11				pFrame;
-	PMEASUREMENT_REPORT_ELEMENT	pReport;
-	PEID_STRUCT			        pEid;
-	PBEACON_REPORT				pBeaconReport;
-	PBSS_ENTRY					pBss;
-
-	// 0. Setup pointer for processing beacon & probe response
-	pMsg   = pElem->Msg;
-	MsgLen = pElem->MsgLen;
-	pFrame = (PFRAME_802_11) pMsg;
-	pSrc   = pFrame->Octet;				// Start from AP TSF
-	pBss   = (PBSS_ENTRY) &pAd->StaCfg.CCXBssTab.BssEntry[Index];
-	ReqIdx = pAd->StaCfg.CurrentRMReqIdx;
-
-	// 1 Check the Index, if we already create this entry, only update the average RSSI
-	if ((Index <= pAd->StaCfg.LastBssIndex) && (pAd->StaCfg.LastBssIndex != 0xff))
-	{
-		pDest  = (PUCHAR) &pAd->StaCfg.FrameReportBuf[pAd->StaCfg.BssReportOffset[Index]];
-		// Point to bss report information
-		pDest += sizeof(MEASUREMENT_REPORT_ELEMENT);
-		pBeaconReport = (PBEACON_REPORT) pDest;
-
-		// Update Rx power, in dBm
-		// Get the original RSSI readback from BBP
-		pBeaconReport->RxPower += pAd->BbpRssiToDbmDelta;
-		// Average the Rssi reading
-		pBeaconReport->RxPower  = (pBeaconReport->RxPower + pBss->Rssi) / 2;
-		// Get to dBm format
-		pBeaconReport->RxPower -= pAd->BbpRssiToDbmDelta;
-
-		DBGPRINT(RT_DEBUG_TRACE, ("Bssid %02x:%02x:%02x:%02x:%02x:%02x ",
-			pBss->Bssid[0], pBss->Bssid[1], pBss->Bssid[2],
-			pBss->Bssid[3], pBss->Bssid[4], pBss->Bssid[5]));
-		DBGPRINT(RT_DEBUG_TRACE, ("RxPower[%ld] Rssi %d, Avg Rssi %d\n", Index, (pBss->Rssi - pAd->BbpRssiToDbmDelta), pBeaconReport->RxPower - 256));
-		DBGPRINT(RT_DEBUG_TRACE, ("FrameReportLen = %d\n", pAd->StaCfg.BssReportOffset[Index]));
-
-		// Update other information here
-
-		// Done
-		return;
-	}
-
-	// 2. Update reported Index
-	pAd->StaCfg.LastBssIndex = Index;
-
-	// 3. Setup the buffer address for copying this BSSID into reporting frame
-	//    The offset should start after 802.11 header and report frame header.
-	pDest = (PUCHAR) &pAd->StaCfg.FrameReportBuf[pAd->StaCfg.FrameReportLen];
-
-	// 4. Save the start offset of each Bss in report frame
-	pAd->StaCfg.BssReportOffset[Index] = pAd->StaCfg.FrameReportLen;
-
-	// 5. Fill Measurement report fields
-	pReport = (PMEASUREMENT_REPORT_ELEMENT) pDest;
-	pReport->Eid = IE_MEASUREMENT_REPORT;
-	pReport->Length = 0;
-	pReport->Token  = pAd->StaCfg.MeasurementRequest[ReqIdx].ReqElem.Token;
-	pReport->Mode   = pAd->StaCfg.MeasurementRequest[ReqIdx].ReqElem.Mode;
-	pReport->Type   = MSRN_TYPE_BEACON_REQ;
-	Length          = sizeof(MEASUREMENT_REPORT_ELEMENT);
-	pDest          += sizeof(MEASUREMENT_REPORT_ELEMENT);
-
-	// 6. Start thebeacon report format
-	pBeaconReport = (PBEACON_REPORT) pDest;
-	pDest        += sizeof(BEACON_REPORT);
-	Length       += sizeof(BEACON_REPORT);
-
-	// 7. Copy Channel number
-	pBeaconReport->Channel        = pBss->Channel;
-	pBeaconReport->Spare          = 0;
-	pBeaconReport->Duration       = pAd->StaCfg.MeasurementRequest[ReqIdx].Measurement.Duration;
-	pBeaconReport->PhyType        = ((pBss->SupRateLen+pBss->ExtRateLen > 4) ? PHY_ERP : PHY_DSS);
-	// 8. Rx power, in dBm
-	pBeaconReport->RxPower        = pBss->Rssi - pAd->BbpRssiToDbmDelta;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Bssid %02x:%02x:%02x:%02x:%02x:%02x ",
-		pBss->Bssid[0], pBss->Bssid[1], pBss->Bssid[2],
-		pBss->Bssid[3], pBss->Bssid[4], pBss->Bssid[5]));
-	DBGPRINT(RT_DEBUG_TRACE, ("RxPower[%ld], Rssi %d\n", Index, pBeaconReport->RxPower - 256));
-	DBGPRINT(RT_DEBUG_TRACE, ("FrameReportLen = %d\n", pAd->StaCfg.FrameReportLen));
-
-	pBeaconReport->BeaconInterval = pBss->BeaconPeriod;
-	COPY_MAC_ADDR(pBeaconReport->BSSID, pFrame->Hdr.Addr3);
-	NdisMoveMemory(pBeaconReport->ParentTSF, pSrc, 4);
-	NdisMoveMemory(pBeaconReport->TargetTSF, &pElem->TimeStamp.u.LowPart, 4);
-	NdisMoveMemory(&pBeaconReport->TargetTSF[4], &pElem->TimeStamp.u.HighPart, 4);
-
-	// 9. Skip the beacon frame and offset to start of capabilityinfo since we already processed capabilityinfo
-	pSrc += (TIMESTAMP_LEN + 2);
-	pBeaconReport->CapabilityInfo = *(USHORT *)pSrc;
-
-	// 10. Point to start of element ID
-	pSrc += 2;
-	pEid = (PEID_STRUCT) pSrc;
-
-	// 11. Start process all variable Eid oayload and add the appropriate to the frame report
-	while (((PUCHAR) pEid + pEid->Len + 1) < ((PUCHAR) pFrame + MsgLen))
-	{
-		// Only limited EID are required to report for CCX 2. It includes SSID, Supported rate,
-		// FH paramenter set, DS parameter set, CF parameter set, IBSS parameter set,
-		// TIM (report first 4 bytes only, radio measurement capability
-		switch (pEid->Eid)
-		{
-			case IE_SSID:
-			case IE_SUPP_RATES:
-			case IE_FH_PARM:
-			case IE_DS_PARM:
-			case IE_CF_PARM:
-			case IE_IBSS_PARM:
-				NdisMoveMemory(pDest, pEid, pEid->Len + 2);
-				pDest  += (pEid->Len + 2);
-				Length += (pEid->Len + 2);
-				break;
-
-			case IE_MEASUREMENT_CAPABILITY:
-				// Since this IE is duplicated with WPA security IE, we has to do sanity check before
-				// recognize it.
-				// 1. It also has fixed 6 bytes IE length.
-				if (pEid->Len != 6)
-					break;
-				// 2. Check the Cisco Aironet OUI
-				if (NdisEqualMemory(CISCO_OUI, (pSrc + 2), 3))
-				{
-					// Matched, this is what we want
-					NdisMoveMemory(pDest, pEid, pEid->Len + 2);
-					pDest  += (pEid->Len + 2);
-					Length += (pEid->Len + 2);
-				}
-				break;
-
-			case IE_TIM:
-				if (pEid->Len > 4)
-				{
-					// May truncate and report the first 4 bytes only, with the eid & len, total should be 6
-					NdisMoveMemory(pDest, pEid, 6);
-					pDest  += 6;
-					Length += 6;
-				}
-				else
-				{
-					NdisMoveMemory(pDest, pEid, pEid->Len + 2);
-					pDest  += (pEid->Len + 2);
-					Length += (pEid->Len + 2);
-				}
-				break;
-
-			default:
-				break;
-		}
-		// 12. Move to next element ID
-		pSrc += (2 + pEid->Len);
-		pEid = (PEID_STRUCT) pSrc;
-	}
-
-	// 13. Update the length in the header, not include EID and length
-	pReport->Length = Length - 4;
-
-	// 14. Update the frame report buffer data length
-	pAd->StaCfg.FrameReportLen += Length;
-	DBGPRINT(RT_DEBUG_TRACE, ("FR len = %d\n", pAd->StaCfg.FrameReportLen));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-
-	Arguments:
-		Index		Current BSSID in CCXBsstab entry index
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-VOID	AironetCreateBeaconReportFromBssTable(
-	IN	PRTMP_ADAPTER		pAd)
-{
-	PMEASUREMENT_REPORT_ELEMENT	pReport;
-	PBEACON_REPORT				pBeaconReport;
-	UCHAR						Index, ReqIdx;
-	USHORT						Length;
-	PUCHAR						pDest;
-	PBSS_ENTRY					pBss;
-
-	// 0. setup base pointer
-	ReqIdx = pAd->StaCfg.CurrentRMReqIdx;
-
-	for (Index = 0; Index < pAd->StaCfg.CCXBssTab.BssNr; Index++)
-	{
-		// 1. Setup the buffer address for copying this BSSID into reporting frame
-		//    The offset should start after 802.11 header and report frame header.
-		pDest  = (PUCHAR) &pAd->StaCfg.FrameReportBuf[pAd->StaCfg.FrameReportLen];
-		pBss   = (PBSS_ENTRY) &pAd->StaCfg.CCXBssTab.BssEntry[Index];
-		Length = 0;
-
-		// 2. Fill Measurement report fields
-		pReport         = (PMEASUREMENT_REPORT_ELEMENT) pDest;
-		pReport->Eid    = IE_MEASUREMENT_REPORT;
-		pReport->Length = 0;
-		pReport->Token  = pAd->StaCfg.MeasurementRequest[ReqIdx].ReqElem.Token;
-		pReport->Mode   = pAd->StaCfg.MeasurementRequest[ReqIdx].ReqElem.Mode;
-		pReport->Type   = MSRN_TYPE_BEACON_REQ;
-		Length          = sizeof(MEASUREMENT_REPORT_ELEMENT);
-		pDest          += sizeof(MEASUREMENT_REPORT_ELEMENT);
-
-		// 3. Start the beacon report format
-		pBeaconReport = (PBEACON_REPORT) pDest;
-		pDest        += sizeof(BEACON_REPORT);
-		Length       += sizeof(BEACON_REPORT);
-
-		// 4. Copy Channel number
-		pBeaconReport->Channel        = pBss->Channel;
-		pBeaconReport->Spare          = 0;
-		pBeaconReport->Duration       = pAd->StaCfg.MeasurementRequest[ReqIdx].Measurement.Duration;
-		pBeaconReport->PhyType        = ((pBss->SupRateLen+pBss->ExtRateLen > 4) ? PHY_ERP : PHY_DSS);
-		pBeaconReport->RxPower        = pBss->Rssi - pAd->BbpRssiToDbmDelta;
-		pBeaconReport->BeaconInterval = pBss->BeaconPeriod;
-		pBeaconReport->CapabilityInfo = pBss->CapabilityInfo;
-		COPY_MAC_ADDR(pBeaconReport->BSSID, pBss->Bssid);
-		NdisMoveMemory(pBeaconReport->ParentTSF, pBss->PTSF, 4);
-		NdisMoveMemory(pBeaconReport->TargetTSF, pBss->TTSF, 8);
-
-		// 5. Create SSID
-		*pDest++ = 0x00;
-		*pDest++ = pBss->SsidLen;
-		NdisMoveMemory(pDest, pBss->Ssid, pBss->SsidLen);
-		pDest  += pBss->SsidLen;
-		Length += (2 + pBss->SsidLen);
-
-		// 6. Create SupportRates
-		*pDest++ = 0x01;
-		*pDest++ = pBss->SupRateLen;
-		NdisMoveMemory(pDest, pBss->SupRate, pBss->SupRateLen);
-		pDest  += pBss->SupRateLen;
-		Length += (2 + pBss->SupRateLen);
-
-		// 7. DS Parameter
-		*pDest++ = 0x03;
-		*pDest++ = 1;
-		*pDest++ = pBss->Channel;
-		Length  += 3;
-
-		// 8. IBSS parameter if presents
-		if (pBss->BssType == BSS_ADHOC)
-		{
-			*pDest++ = 0x06;
-			*pDest++ = 2;
-			*(PUSHORT) pDest = pBss->AtimWin;
-			pDest   += 2;
-			Length  += 4;
-		}
-
-		// 9. Update length field, not include EID and length
-		pReport->Length = Length - 4;
-
-		// 10. Update total frame size
-		pAd->StaCfg.FrameReportLen += Length;
-	}
-}
+#include "../../rt2870/sta/aironet.c"
diff --git a/drivers/staging/rt3070/sta/assoc.c b/drivers/staging/rt3070/sta/assoc.c
index 5c33a895bf7..1987a2a4b05 100644
--- a/drivers/staging/rt3070/sta/assoc.c
+++ b/drivers/staging/rt3070/sta/assoc.c
@@ -1,2060 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	assoc.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	John		2004-9-3		porting from RT2500
-*/
-#include "../rt_config.h"
-
-UCHAR	CipherWpaTemplate[] = {
-		0xdd, 					// WPA IE
-		0x16,					// Length
-		0x00, 0x50, 0xf2, 0x01,	// oui
-		0x01, 0x00,				// Version
-		0x00, 0x50, 0xf2, 0x02,	// Multicast
-		0x01, 0x00,				// Number of unicast
-		0x00, 0x50, 0xf2, 0x02,	// unicast
-		0x01, 0x00,				// number of authentication method
-		0x00, 0x50, 0xf2, 0x01	// authentication
-		};
-
-UCHAR	CipherWpa2Template[] = {
-		0x30,					// RSN IE
-		0x14,					// Length
-		0x01, 0x00,				// Version
-		0x00, 0x0f, 0xac, 0x02,	// group cipher, TKIP
-		0x01, 0x00,				// number of pairwise
-		0x00, 0x0f, 0xac, 0x02,	// unicast
-		0x01, 0x00,				// number of authentication method
-		0x00, 0x0f, 0xac, 0x02,	// authentication
-		0x00, 0x00,				// RSN capability
-		};
-
-UCHAR	Ccx2IeInfo[] = { 0x00, 0x40, 0x96, 0x03, 0x02};
-
-/*
-	==========================================================================
-	Description:
-		association state machine init, including state transition and timer init
-	Parameters:
-		S - pointer to the association state machine
-
-	IRQL = PASSIVE_LEVEL
-
-	==========================================================================
- */
-VOID AssocStateMachineInit(
-	IN	PRTMP_ADAPTER	pAd,
-	IN  STATE_MACHINE *S,
-	OUT STATE_MACHINE_FUNC Trans[])
-{
-	StateMachineInit(S, Trans, MAX_ASSOC_STATE, MAX_ASSOC_MSG, (STATE_MACHINE_FUNC)Drop, ASSOC_IDLE, ASSOC_MACHINE_BASE);
-
-	// first column
-	StateMachineSetAction(S, ASSOC_IDLE, MT2_MLME_ASSOC_REQ, (STATE_MACHINE_FUNC)MlmeAssocReqAction);
-	StateMachineSetAction(S, ASSOC_IDLE, MT2_MLME_REASSOC_REQ, (STATE_MACHINE_FUNC)MlmeReassocReqAction);
-	StateMachineSetAction(S, ASSOC_IDLE, MT2_MLME_DISASSOC_REQ, (STATE_MACHINE_FUNC)MlmeDisassocReqAction);
-	StateMachineSetAction(S, ASSOC_IDLE, MT2_PEER_DISASSOC_REQ, (STATE_MACHINE_FUNC)PeerDisassocAction);
-
-	// second column
-	StateMachineSetAction(S, ASSOC_WAIT_RSP, MT2_MLME_ASSOC_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenAssoc);
-	StateMachineSetAction(S, ASSOC_WAIT_RSP, MT2_MLME_REASSOC_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenReassoc);
-	StateMachineSetAction(S, ASSOC_WAIT_RSP, MT2_MLME_DISASSOC_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenDisassociate);
-	StateMachineSetAction(S, ASSOC_WAIT_RSP, MT2_PEER_DISASSOC_REQ, (STATE_MACHINE_FUNC)PeerDisassocAction);
-	StateMachineSetAction(S, ASSOC_WAIT_RSP, MT2_PEER_ASSOC_RSP, (STATE_MACHINE_FUNC)PeerAssocRspAction);
-	//
-	// Patch 3Com AP MOde:3CRWE454G72
-	// We send Assoc request frame to this AP, it always send Reassoc Rsp not Associate Rsp.
-	//
-	StateMachineSetAction(S, ASSOC_WAIT_RSP, MT2_PEER_REASSOC_RSP, (STATE_MACHINE_FUNC)PeerAssocRspAction);
-	StateMachineSetAction(S, ASSOC_WAIT_RSP, MT2_ASSOC_TIMEOUT, (STATE_MACHINE_FUNC)AssocTimeoutAction);
-
-	// third column
-	StateMachineSetAction(S, REASSOC_WAIT_RSP, MT2_MLME_ASSOC_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenAssoc);
-	StateMachineSetAction(S, REASSOC_WAIT_RSP, MT2_MLME_REASSOC_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenReassoc);
-	StateMachineSetAction(S, REASSOC_WAIT_RSP, MT2_MLME_DISASSOC_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenDisassociate);
-	StateMachineSetAction(S, REASSOC_WAIT_RSP, MT2_PEER_DISASSOC_REQ, (STATE_MACHINE_FUNC)PeerDisassocAction);
-	StateMachineSetAction(S, REASSOC_WAIT_RSP, MT2_PEER_REASSOC_RSP, (STATE_MACHINE_FUNC)PeerReassocRspAction);
-	//
-	// Patch, AP doesn't send Reassociate Rsp frame to Station.
-	//
-	StateMachineSetAction(S, REASSOC_WAIT_RSP, MT2_PEER_ASSOC_RSP, (STATE_MACHINE_FUNC)PeerReassocRspAction);
-	StateMachineSetAction(S, REASSOC_WAIT_RSP, MT2_REASSOC_TIMEOUT, (STATE_MACHINE_FUNC)ReassocTimeoutAction);
-
-	// fourth column
-	StateMachineSetAction(S, DISASSOC_WAIT_RSP, MT2_MLME_ASSOC_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenAssoc);
-	StateMachineSetAction(S, DISASSOC_WAIT_RSP, MT2_MLME_REASSOC_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenReassoc);
-	StateMachineSetAction(S, DISASSOC_WAIT_RSP, MT2_MLME_DISASSOC_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenDisassociate);
-	StateMachineSetAction(S, DISASSOC_WAIT_RSP, MT2_PEER_DISASSOC_REQ, (STATE_MACHINE_FUNC)PeerDisassocAction);
-	StateMachineSetAction(S, DISASSOC_WAIT_RSP, MT2_DISASSOC_TIMEOUT, (STATE_MACHINE_FUNC)DisassocTimeoutAction);
-
-	// initialize the timer
-	RTMPInitTimer(pAd, &pAd->MlmeAux.AssocTimer, GET_TIMER_FUNCTION(AssocTimeout), pAd, FALSE);
-	RTMPInitTimer(pAd, &pAd->MlmeAux.ReassocTimer, GET_TIMER_FUNCTION(ReassocTimeout), pAd, FALSE);
-	RTMPInitTimer(pAd, &pAd->MlmeAux.DisassocTimer, GET_TIMER_FUNCTION(DisassocTimeout), pAd, FALSE);
-}
-
-/*
-	==========================================================================
-	Description:
-		Association timeout procedure. After association timeout, this function
-		will be called and it will put a message into the MLME queue
-	Parameters:
-		Standard timer parameters
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AssocTimeout(IN PVOID SystemSpecific1,
-				 IN PVOID FunctionContext,
-				 IN PVOID SystemSpecific2,
-				 IN PVOID SystemSpecific3)
-{
-	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;
-
-	// Do nothing if the driver is starting halt state.
-	// This might happen when timer already been fired before cancel timer with mlmehalt
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
-		return;
-
-	MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_ASSOC_TIMEOUT, 0, NULL);
-	RT28XX_MLME_HANDLER(pAd);
-}
-
-/*
-	==========================================================================
-	Description:
-		Reassociation timeout procedure. After reassociation timeout, this
-		function will be called and put a message into the MLME queue
-	Parameters:
-		Standard timer parameters
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID ReassocTimeout(IN PVOID SystemSpecific1,
-					IN PVOID FunctionContext,
-					IN PVOID SystemSpecific2,
-					IN PVOID SystemSpecific3)
-{
-	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;
-
-	// Do nothing if the driver is starting halt state.
-	// This might happen when timer already been fired before cancel timer with mlmehalt
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
-		return;
-
-	MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_REASSOC_TIMEOUT, 0, NULL);
-	RT28XX_MLME_HANDLER(pAd);
-}
-
-/*
-	==========================================================================
-	Description:
-		Disassociation timeout procedure. After disassociation timeout, this
-		function will be called and put a message into the MLME queue
-	Parameters:
-		Standard timer parameters
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID DisassocTimeout(IN PVOID SystemSpecific1,
-					IN PVOID FunctionContext,
-					IN PVOID SystemSpecific2,
-					IN PVOID SystemSpecific3)
-{
-	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;
-
-	// Do nothing if the driver is starting halt state.
-	// This might happen when timer already been fired before cancel timer with mlmehalt
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
-		return;
-
-	MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_DISASSOC_TIMEOUT, 0, NULL);
-	RT28XX_MLME_HANDLER(pAd);
-}
-
-/*
-	==========================================================================
-	Description:
-		mlme assoc req handling procedure
-	Parameters:
-		Adapter - Adapter pointer
-		Elem - MLME Queue Element
-	Pre:
-		the station has been authenticated and the following information is stored in the config
-			-# SSID
-			-# supported rates and their length
-			-# listen interval (Adapter->StaCfg.default_listen_count)
-			-# Transmit power  (Adapter->StaCfg.tx_power)
-	Post  :
-		-# An association request frame is generated and sent to the air
-		-# Association timer starts
-		-# Association state -> ASSOC_WAIT_RSP
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID MlmeAssocReqAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR			ApAddr[6];
-	HEADER_802_11	AssocHdr;
-	UCHAR			Ccx2Len = 5;
-	UCHAR			WmeIe[9] = {IE_VENDOR_SPECIFIC, 0x07, 0x00, 0x50, 0xf2, 0x02, 0x00, 0x01, 0x00};
-	USHORT			ListenIntv;
-	ULONG			Timeout;
-	USHORT			CapabilityInfo;
-	BOOLEAN			TimerCancelled;
-	PUCHAR			pOutBuffer = NULL;
-	NDIS_STATUS		NStatus;
-	ULONG			FrameLen = 0;
-	ULONG			tmp;
-	USHORT			VarIesOffset;
-	UCHAR			CkipFlag;
-	UCHAR			CkipNegotiationBuffer[CKIP_NEGOTIATION_LENGTH];
-	UCHAR			AironetCkipIe = IE_AIRONET_CKIP;
-	UCHAR			AironetCkipLen = CKIP_NEGOTIATION_LENGTH;
-	UCHAR			AironetIPAddressIE = IE_AIRONET_IPADDRESS;
-	UCHAR			AironetIPAddressLen = AIRONET_IPADDRESS_LENGTH;
-	UCHAR			AironetIPAddressBuffer[AIRONET_IPADDRESS_LENGTH] = {0x00, 0x40, 0x96, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00};
-	USHORT			Status;
-
-	// Block all authentication request durning WPA block period
-	if (pAd->StaCfg.bBlockAssoc == TRUE)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - Block Assoc request durning WPA block period!\n"));
-		pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-		Status = MLME_STATE_MACHINE_REJECT;
-		MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_ASSOC_CONF, 2, &Status);
-	}
-	// check sanity first
-	else if (MlmeAssocReqSanity(pAd, Elem->Msg, Elem->MsgLen, ApAddr, &CapabilityInfo, &Timeout, &ListenIntv))
-	{
-		RTMPCancelTimer(&pAd->MlmeAux.AssocTimer, &TimerCancelled);
-		COPY_MAC_ADDR(pAd->MlmeAux.Bssid, ApAddr);
-
-		// Get an unused nonpaged memory
-		NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);
-		if (NStatus != NDIS_STATUS_SUCCESS)
-		{
-			DBGPRINT(RT_DEBUG_TRACE,("ASSOC - MlmeAssocReqAction() allocate memory failed \n"));
-			pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-			Status = MLME_FAIL_NO_RESOURCE;
-			MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_ASSOC_CONF, 2, &Status);
-			return;
-		}
-
-		// Add by James 03/06/27
-		pAd->StaCfg.AssocInfo.Length = sizeof(NDIS_802_11_ASSOCIATION_INFORMATION);
-		// Association don't need to report MAC address
-		pAd->StaCfg.AssocInfo.AvailableRequestFixedIEs =
-			NDIS_802_11_AI_REQFI_CAPABILITIES | NDIS_802_11_AI_REQFI_LISTENINTERVAL;
-		pAd->StaCfg.AssocInfo.RequestFixedIEs.Capabilities = CapabilityInfo;
-		pAd->StaCfg.AssocInfo.RequestFixedIEs.ListenInterval = ListenIntv;
-		// Only reassociate need this
-		//COPY_MAC_ADDR(pAd->StaCfg.AssocInfo.RequestFixedIEs.CurrentAPAddress, ApAddr);
-		pAd->StaCfg.AssocInfo.OffsetRequestIEs = sizeof(NDIS_802_11_ASSOCIATION_INFORMATION);
-
-        NdisZeroMemory(pAd->StaCfg.ReqVarIEs, MAX_VIE_LEN);
-		// First add SSID
-		VarIesOffset = 0;
-		NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, &SsidIe, 1);
-		VarIesOffset += 1;
-		NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, &pAd->MlmeAux.SsidLen, 1);
-		VarIesOffset += 1;
-		NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen);
-		VarIesOffset += pAd->MlmeAux.SsidLen;
-
-		// Second add Supported rates
-		NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, &SupRateIe, 1);
-		VarIesOffset += 1;
-		NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, &pAd->MlmeAux.SupRateLen, 1);
-		VarIesOffset += 1;
-		NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, pAd->MlmeAux.SupRate, pAd->MlmeAux.SupRateLen);
-		VarIesOffset += pAd->MlmeAux.SupRateLen;
-		// End Add by James
-
-        if ((pAd->CommonCfg.Channel > 14) &&
-            (pAd->CommonCfg.bIEEE80211H == TRUE))
-            CapabilityInfo |= 0x0100;
-
-		DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - Send ASSOC request...\n"));
-		MgtMacHeaderInit(pAd, &AssocHdr, SUBTYPE_ASSOC_REQ, 0, ApAddr, ApAddr);
-
-		// Build basic frame first
-		MakeOutgoingFrame(pOutBuffer,				&FrameLen,
-						  sizeof(HEADER_802_11),	&AssocHdr,
-						  2,						&CapabilityInfo,
-						  2,						&ListenIntv,
-						  1,						&SsidIe,
-						  1,						&pAd->MlmeAux.SsidLen,
-						  pAd->MlmeAux.SsidLen, 	pAd->MlmeAux.Ssid,
-						  1,						&SupRateIe,
-						  1,						&pAd->MlmeAux.SupRateLen,
-						  pAd->MlmeAux.SupRateLen,  pAd->MlmeAux.SupRate,
-						  END_OF_ARGS);
-
-		if (pAd->MlmeAux.ExtRateLen != 0)
-		{
-			MakeOutgoingFrame(pOutBuffer + FrameLen,    &tmp,
-							  1,                        &ExtRateIe,
-							  1,                        &pAd->MlmeAux.ExtRateLen,
-							  pAd->MlmeAux.ExtRateLen,  pAd->MlmeAux.ExtRate,
-							  END_OF_ARGS);
-			FrameLen += tmp;
-		}
-
-#ifdef DOT11_N_SUPPORT
-		// HT
-		if ((pAd->MlmeAux.HtCapabilityLen > 0) && (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
-		{
-			ULONG TmpLen;
-			UCHAR HtLen;
-			UCHAR BROADCOM[4] = {0x0, 0x90, 0x4c, 0x33};
-			if (pAd->StaActive.SupportedPhyInfo.bPreNHt == TRUE)
-			{
-				HtLen = SIZE_HT_CAP_IE + 4;
-				MakeOutgoingFrame(pOutBuffer + FrameLen,            &TmpLen,
-							  1,                                &WpaIe,
-							  1,                                &HtLen,
-							  4,                                &BROADCOM[0],
-							 pAd->MlmeAux.HtCapabilityLen,          &pAd->MlmeAux.HtCapability,
-							  END_OF_ARGS);
-			}
-			else
-			{
-#ifdef RT_BIG_ENDIAN
-		        HT_CAPABILITY_IE HtCapabilityTmp;
-#endif
-
-#ifndef RT_BIG_ENDIAN
-				MakeOutgoingFrame(pOutBuffer + FrameLen,            &TmpLen,
-							  1,                                &HtCapIe,
-							  1,                                &pAd->MlmeAux.HtCapabilityLen,
-							 pAd->MlmeAux.HtCapabilityLen,          &pAd->MlmeAux.HtCapability,
-							  END_OF_ARGS);
-#else
-                NdisZeroMemory(&HtCapabilityTmp, sizeof(HT_CAPABILITY_IE));
-                NdisMoveMemory(&HtCapabilityTmp, &pAd->MlmeAux.HtCapability, pAd->MlmeAux.HtCapabilityLen);
-        		*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
-        		*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
-
-        		MakeOutgoingFrame(pOutBuffer + FrameLen,         &TmpLen,
-        							1,                           &HtCapIe,
-        							1,                           &pAd->MlmeAux.HtCapabilityLen,
-        							pAd->MlmeAux.HtCapabilityLen,&HtCapabilityTmp,
-        							END_OF_ARGS);
-#endif
-			}
-			FrameLen += TmpLen;
-		}
-#endif // DOT11_N_SUPPORT //
-
-		// add Ralink proprietary IE to inform AP this STA is going to use AGGREGATION or PIGGY-BACK+AGGREGATION
-		// Case I: (Aggregation + Piggy-Back)
-		// 1. user enable aggregation, AND
-		// 2. Mac support piggy-back
-		// 3. AP annouces it's PIGGY-BACK+AGGREGATION-capable in BEACON
-		// Case II: (Aggregation)
-		// 1. user enable aggregation, AND
-		// 2. AP annouces it's AGGREGATION-capable in BEACON
-		if (pAd->CommonCfg.bAggregationCapable)
-		{
-			if ((pAd->CommonCfg.bPiggyBackCapable) && ((pAd->MlmeAux.APRalinkIe & 0x00000003) == 3))
-			{
-				ULONG TmpLen;
-				UCHAR RalinkIe[9] = {IE_VENDOR_SPECIFIC, 7, 0x00, 0x0c, 0x43, 0x03, 0x00, 0x00, 0x00};
-				MakeOutgoingFrame(pOutBuffer+FrameLen,           &TmpLen,
-								  9,                             RalinkIe,
-								  END_OF_ARGS);
-				FrameLen += TmpLen;
-			}
-			else if (pAd->MlmeAux.APRalinkIe & 0x00000001)
-			{
-				ULONG TmpLen;
-				UCHAR RalinkIe[9] = {IE_VENDOR_SPECIFIC, 7, 0x00, 0x0c, 0x43, 0x01, 0x00, 0x00, 0x00};
-				MakeOutgoingFrame(pOutBuffer+FrameLen,           &TmpLen,
-								  9,                             RalinkIe,
-								  END_OF_ARGS);
-				FrameLen += TmpLen;
-			}
-		}
-		else
-		{
-			ULONG TmpLen;
-			UCHAR RalinkIe[9] = {IE_VENDOR_SPECIFIC, 7, 0x00, 0x0c, 0x43, 0x06, 0x00, 0x00, 0x00};
-			MakeOutgoingFrame(pOutBuffer+FrameLen,		 &TmpLen,
-							  9,						 RalinkIe,
-							  END_OF_ARGS);
-			FrameLen += TmpLen;
-		}
-
-		if (pAd->MlmeAux.APEdcaParm.bValid)
-		{
-			if (pAd->CommonCfg.bAPSDCapable && pAd->MlmeAux.APEdcaParm.bAPSDCapable)
-			{
-				QBSS_STA_INFO_PARM QosInfo;
-
-				NdisZeroMemory(&QosInfo, sizeof(QBSS_STA_INFO_PARM));
-				QosInfo.UAPSD_AC_BE = pAd->CommonCfg.bAPSDAC_BE;
-				QosInfo.UAPSD_AC_BK = pAd->CommonCfg.bAPSDAC_BK;
-				QosInfo.UAPSD_AC_VI = pAd->CommonCfg.bAPSDAC_VI;
-				QosInfo.UAPSD_AC_VO = pAd->CommonCfg.bAPSDAC_VO;
-				QosInfo.MaxSPLength = pAd->CommonCfg.MaxSPLength;
-				WmeIe[8] |= *(PUCHAR)&QosInfo;
-			}
-			else
-			{
-                // The Parameter Set Count is set to ¡§0¡¨ in the association request frames
-                // WmeIe[8] |= (pAd->MlmeAux.APEdcaParm.EdcaUpdateCount & 0x0f);
-			}
-
-			MakeOutgoingFrame(pOutBuffer + FrameLen,    &tmp,
-							  9,                        &WmeIe[0],
-							  END_OF_ARGS);
-			FrameLen += tmp;
-		}
-
-		//
-		// Let WPA(#221) Element ID on the end of this association frame.
-		// Otherwise some AP will fail on parsing Element ID and set status fail on Assoc Rsp.
-		// For example: Put Vendor Specific IE on the front of WPA IE.
-		// This happens on AP (Model No:Linksys WRK54G)
-		//
-		if (((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
-            (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK) ||
-            (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) ||
-            (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2)
-			)
-            )
-		{
-			UCHAR RSNIe = IE_WPA;
-
-			if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK) ||
-                (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2))
-			{
-				RSNIe = IE_WPA2;
-			}
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-#ifdef SIOCSIWGENIE
-			if (pAd->StaCfg.WpaSupplicantUP != 1)
-#endif // SIOCSIWGENIE //
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-            	RTMPMakeRSNIE(pAd, pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus, BSS0);
-
-            // Check for WPA PMK cache list
-			if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2)
-			{
-			    INT     idx;
-                BOOLEAN FoundPMK = FALSE;
-				// Search chched PMKID, append it if existed
-				for (idx = 0; idx < PMKID_NO; idx++)
-				{
-					if (NdisEqualMemory(ApAddr, &pAd->StaCfg.SavedPMK[idx].BSSID, 6))
-					{
-						FoundPMK = TRUE;
-						break;
-					}
-				}
-
-				if (FoundPMK)
-				{
-					// Set PMK number
-					*(PUSHORT) &pAd->StaCfg.RSN_IE[pAd->StaCfg.RSNIE_Len] = 1;
-					NdisMoveMemory(&pAd->StaCfg.RSN_IE[pAd->StaCfg.RSNIE_Len + 2], &pAd->StaCfg.SavedPMK[idx].PMKID, 16);
-                    pAd->StaCfg.RSNIE_Len += 18;
-				}
-			}
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-#ifdef SIOCSIWGENIE
-			if (pAd->StaCfg.WpaSupplicantUP == 1)
-			{
-				MakeOutgoingFrame(pOutBuffer + FrameLen,    		&tmp,
-		                        	pAd->StaCfg.RSNIE_Len,			pAd->StaCfg.RSN_IE,
-		                        	END_OF_ARGS);
-			}
-			else
-#endif
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-			{
-				MakeOutgoingFrame(pOutBuffer + FrameLen,    		&tmp,
-				              		1,                              &RSNIe,
-		                        	1,                              &pAd->StaCfg.RSNIE_Len,
-		                        	pAd->StaCfg.RSNIE_Len,			pAd->StaCfg.RSN_IE,
-		                        	END_OF_ARGS);
-			}
-
-			FrameLen += tmp;
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-#ifdef SIOCSIWGENIE
-			if (pAd->StaCfg.WpaSupplicantUP != 1)
-#endif
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-			{
-	            // Append Variable IE
-	            NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, &RSNIe, 1);
-	            VarIesOffset += 1;
-	            NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, &pAd->StaCfg.RSNIE_Len, 1);
-	            VarIesOffset += 1;
-			}
-			NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, pAd->StaCfg.RSN_IE, pAd->StaCfg.RSNIE_Len);
-			VarIesOffset += pAd->StaCfg.RSNIE_Len;
-
-			// Set Variable IEs Length
-			pAd->StaCfg.ReqVarIELen = VarIesOffset;
-		}
-
-		// We have update that at PeerBeaconAtJoinRequest()
-		CkipFlag = pAd->StaCfg.CkipFlag;
-		if (CkipFlag != 0)
-		{
-			NdisZeroMemory(CkipNegotiationBuffer, CKIP_NEGOTIATION_LENGTH);
-			CkipNegotiationBuffer[2] = 0x66;
-			// Make it try KP & MIC, since we have to follow the result from AssocRsp
-			CkipNegotiationBuffer[8] = 0x18;
-			CkipNegotiationBuffer[CKIP_NEGOTIATION_LENGTH - 1] = 0x22;
-			CkipFlag = 0x18;
-
-			MakeOutgoingFrame(pOutBuffer + FrameLen, 	&tmp,
-						1,						  		&AironetCkipIe,
-						1,						  		&AironetCkipLen,
-						AironetCkipLen, 		  		CkipNegotiationBuffer,
-						END_OF_ARGS);
-			FrameLen += tmp;
-		}
-
-		// Add CCX v2 request if CCX2 admin state is on
-		if (pAd->StaCfg.CCXControl.field.Enable == 1)
-		{
-
-			//
-			// Add AironetIPAddressIE for Cisco CCX 2.X
-			// Add CCX Version
-			//
-			MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp,
-						1,							&AironetIPAddressIE,
-						1,							&AironetIPAddressLen,
-						AironetIPAddressLen,		AironetIPAddressBuffer,
-						1,							&Ccx2Ie,
-						1,							&Ccx2Len,
-						Ccx2Len,				    Ccx2IeInfo,
-						END_OF_ARGS);
-			FrameLen += tmp;
-
-			//
-			// Add CipherSuite CCKM or LeapTkip if setting.
-			//
-#ifdef LEAP_SUPPORT
-			if (LEAP_CCKM_ON(pAd))
-			{
-				MakeOutgoingFrame(pOutBuffer + FrameLen,	&tmp,
-						CipherSuiteCiscoCCKMLen,		CipherSuiteCiscoCCKM,
-						END_OF_ARGS);
-				FrameLen += tmp;
-
-				// Third add RSN
-				NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, CipherSuiteCiscoCCKM, CipherSuiteCiscoCCKMLen); //Save CipherSuite
-				VarIesOffset += CipherSuiteCiscoCCKMLen;
-			}
-			else if ((pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP) && (pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled))
-			{
-				MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp,
-						CipherSuiteCCXTkipLen,	    CipherSuiteCCXTkip,
-						END_OF_ARGS);
-				FrameLen += tmp;
-
-				// Third add RSN
-				NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, CipherSuiteCCXTkip, CipherSuiteCCXTkipLen);
-				VarIesOffset += CipherSuiteCCXTkipLen;
-			}
-#endif // LEAP_SUPPORT //
-
-			// Add by James 03/06/27
-			// Set Variable IEs Length
-			pAd->StaCfg.ReqVarIELen = VarIesOffset;
-			pAd->StaCfg.AssocInfo.RequestIELength = VarIesOffset;
-
-			// OffsetResponseIEs follow ReqVarIE
-			pAd->StaCfg.AssocInfo.OffsetResponseIEs = sizeof(NDIS_802_11_ASSOCIATION_INFORMATION) + pAd->StaCfg.ReqVarIELen;
-			// End Add by James
-		}
-
-
-		MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-		MlmeFreeMemory(pAd, pOutBuffer);
-
-		RTMPSetTimer(&pAd->MlmeAux.AssocTimer, Timeout);
-		pAd->Mlme.AssocMachine.CurrState = ASSOC_WAIT_RSP;
-	}
-	else
-	{
-		DBGPRINT(RT_DEBUG_TRACE,("ASSOC - MlmeAssocReqAction() sanity check failed. BUG!!!!!! \n"));
-		pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-		Status = MLME_INVALID_FORMAT;
-		MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_ASSOC_CONF, 2, &Status);
-	}
-
-}
-
-/*
-	==========================================================================
-	Description:
-		mlme reassoc req handling procedure
-	Parameters:
-		Elem -
-	Pre:
-		-# SSID  (Adapter->StaCfg.ssid[])
-		-# BSSID (AP address, Adapter->StaCfg.bssid)
-		-# Supported rates (Adapter->StaCfg.supported_rates[])
-		-# Supported rates length (Adapter->StaCfg.supported_rates_len)
-		-# Tx power (Adapter->StaCfg.tx_power)
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID MlmeReassocReqAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR			ApAddr[6];
-	HEADER_802_11	ReassocHdr;
-	UCHAR			Ccx2Len = 5;
-	UCHAR			WmeIe[9] = {IE_VENDOR_SPECIFIC, 0x07, 0x00, 0x50, 0xf2, 0x02, 0x00, 0x01, 0x00};
-	USHORT			CapabilityInfo, ListenIntv;
-	ULONG			Timeout;
-	ULONG			FrameLen = 0;
-	BOOLEAN			TimerCancelled;
-	NDIS_STATUS		NStatus;
-	ULONG			tmp;
-	PUCHAR			pOutBuffer = NULL;
-//CCX 2.X
-#ifdef LEAP_SUPPORT
-	UCHAR			CkipFlag;
-	UCHAR			CkipNegotiationBuffer[CKIP_NEGOTIATION_LENGTH];
-	UCHAR			AironetCkipIe = IE_AIRONET_CKIP;
-	UCHAR			AironetCkipLen = CKIP_NEGOTIATION_LENGTH;
-	UCHAR			AironetIPAddressIE = IE_AIRONET_IPADDRESS;
-	UCHAR			AironetIPAddressLen = AIRONET_IPADDRESS_LENGTH;
-	UCHAR			AironetIPAddressBuffer[AIRONET_IPADDRESS_LENGTH] = {0x00, 0x40, 0x96, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00};
-	UCHAR			AironetCCKMReassocIE = IE_AIRONET_CCKMREASSOC;
-	UCHAR			AironetCCKMReassocLen = AIRONET_CCKMREASSOC_LENGTH;
-	UCHAR			AironetCCKMReassocBuffer[AIRONET_CCKMREASSOC_LENGTH];
-	UCHAR			AironetOUI[] = {0x00, 0x40, 0x96, 0x00};
-	UCHAR			MICMN[16];
-	UCHAR			CalcMicBuffer[80];
-	ULONG			CalcMicBufferLen = 0;
-#endif // LEAP_SUPPORT //
-	USHORT			Status;
-
-	// Block all authentication request durning WPA block period
-	if (pAd->StaCfg.bBlockAssoc == TRUE)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - Block ReAssoc request durning WPA block period!\n"));
-		pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-		Status = MLME_STATE_MACHINE_REJECT;
-		MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_REASSOC_CONF, 2, &Status);
-	}
-	// the parameters are the same as the association
-	else if(MlmeAssocReqSanity(pAd, Elem->Msg, Elem->MsgLen, ApAddr, &CapabilityInfo, &Timeout, &ListenIntv))
-	{
-		RTMPCancelTimer(&pAd->MlmeAux.ReassocTimer, &TimerCancelled);
-
-		NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-		if(NStatus != NDIS_STATUS_SUCCESS)
-		{
-			DBGPRINT(RT_DEBUG_TRACE,("ASSOC - MlmeReassocReqAction() allocate memory failed \n"));
-			pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-			Status = MLME_FAIL_NO_RESOURCE;
-			MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_REASSOC_CONF, 2, &Status);
-			return;
-		}
-
-		COPY_MAC_ADDR(pAd->MlmeAux.Bssid, ApAddr);
-
-		// make frame, use bssid as the AP address??
-		DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - Send RE-ASSOC request...\n"));
-		MgtMacHeaderInit(pAd, &ReassocHdr, SUBTYPE_REASSOC_REQ, 0, ApAddr, ApAddr);
-		MakeOutgoingFrame(pOutBuffer,               &FrameLen,
-						  sizeof(HEADER_802_11),    &ReassocHdr,
-						  2,                        &CapabilityInfo,
-						  2,                        &ListenIntv,
-						  MAC_ADDR_LEN,             ApAddr,
-						  1,                        &SsidIe,
-						  1,                        &pAd->MlmeAux.SsidLen,
-						  pAd->MlmeAux.SsidLen,     pAd->MlmeAux.Ssid,
-						  1,                        &SupRateIe,
-						  1,						&pAd->MlmeAux.SupRateLen,
-						  pAd->MlmeAux.SupRateLen,  pAd->MlmeAux.SupRate,
-						  END_OF_ARGS);
-
-		if (pAd->MlmeAux.ExtRateLen != 0)
-		{
-			MakeOutgoingFrame(pOutBuffer + FrameLen,        &tmp,
-							  1,                            &ExtRateIe,
-							  1,                            &pAd->MlmeAux.ExtRateLen,
-							  pAd->MlmeAux.ExtRateLen,	    pAd->MlmeAux.ExtRate,
-							  END_OF_ARGS);
-			FrameLen += tmp;
-		}
-
-		if (pAd->MlmeAux.APEdcaParm.bValid)
-		{
-			if (pAd->CommonCfg.bAPSDCapable && pAd->MlmeAux.APEdcaParm.bAPSDCapable)
-			{
-				QBSS_STA_INFO_PARM QosInfo;
-
-				NdisZeroMemory(&QosInfo, sizeof(QBSS_STA_INFO_PARM));
-				QosInfo.UAPSD_AC_BE = pAd->CommonCfg.bAPSDAC_BE;
-				QosInfo.UAPSD_AC_BK = pAd->CommonCfg.bAPSDAC_BK;
-				QosInfo.UAPSD_AC_VI = pAd->CommonCfg.bAPSDAC_VI;
-				QosInfo.UAPSD_AC_VO = pAd->CommonCfg.bAPSDAC_VO;
-				QosInfo.MaxSPLength = pAd->CommonCfg.MaxSPLength;
-				WmeIe[8] |= *(PUCHAR)&QosInfo;
-			}
-
-			MakeOutgoingFrame(pOutBuffer + FrameLen,    &tmp,
-							  9,                        &WmeIe[0],
-							  END_OF_ARGS);
-			FrameLen += tmp;
-		}
-
-#ifdef DOT11_N_SUPPORT
-		// HT
-		if ((pAd->MlmeAux.HtCapabilityLen > 0) && (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
-		{
-			ULONG TmpLen;
-			UCHAR HtLen;
-			UCHAR BROADCOM[4] = {0x0, 0x90, 0x4c, 0x33};
-			if (pAd->StaActive.SupportedPhyInfo.bPreNHt == TRUE)
-			{
-				HtLen = SIZE_HT_CAP_IE + 4;
-				MakeOutgoingFrame(pOutBuffer + FrameLen,            &TmpLen,
-							  1,                                &WpaIe,
-							  1,                                &HtLen,
-							  4,                                &BROADCOM[0],
-							 pAd->MlmeAux.HtCapabilityLen,          &pAd->MlmeAux.HtCapability,
-							  END_OF_ARGS);
-			}
-			else
-			{
-				MakeOutgoingFrame(pOutBuffer + FrameLen,            &TmpLen,
-							  1,                                &HtCapIe,
-							  1,                                &pAd->MlmeAux.HtCapabilityLen,
-							 pAd->MlmeAux.HtCapabilityLen,          &pAd->MlmeAux.HtCapability,
-							  END_OF_ARGS);
-			}
-			FrameLen += TmpLen;
-		}
-#endif // DOT11_N_SUPPORT //
-
-		// add Ralink proprietary IE to inform AP this STA is going to use AGGREGATION or PIGGY-BACK+AGGREGATION
-		// Case I: (Aggregation + Piggy-Back)
-		// 1. user enable aggregation, AND
-		// 2. Mac support piggy-back
-		// 3. AP annouces it's PIGGY-BACK+AGGREGATION-capable in BEACON
-		// Case II: (Aggregation)
-		// 1. user enable aggregation, AND
-		// 2. AP annouces it's AGGREGATION-capable in BEACON
-		if (pAd->CommonCfg.bAggregationCapable)
-		{
-			if ((pAd->CommonCfg.bPiggyBackCapable) && ((pAd->MlmeAux.APRalinkIe & 0x00000003) == 3))
-			{
-				ULONG TmpLen;
-				UCHAR RalinkIe[9] = {IE_VENDOR_SPECIFIC, 7, 0x00, 0x0c, 0x43, 0x03, 0x00, 0x00, 0x00};
-				MakeOutgoingFrame(pOutBuffer+FrameLen,           &TmpLen,
-								  9,                             RalinkIe,
-								  END_OF_ARGS);
-				FrameLen += TmpLen;
-			}
-			else if (pAd->MlmeAux.APRalinkIe & 0x00000001)
-			{
-				ULONG TmpLen;
-				UCHAR RalinkIe[9] = {IE_VENDOR_SPECIFIC, 7, 0x00, 0x0c, 0x43, 0x01, 0x00, 0x00, 0x00};
-				MakeOutgoingFrame(pOutBuffer+FrameLen,           &TmpLen,
-								  9,                             RalinkIe,
-								  END_OF_ARGS);
-				FrameLen += TmpLen;
-			}
-		}
-		else
-		{
-			ULONG TmpLen;
-			UCHAR RalinkIe[9] = {IE_VENDOR_SPECIFIC, 7, 0x00, 0x0c, 0x43, 0x04, 0x00, 0x00, 0x00};
-			MakeOutgoingFrame(pOutBuffer+FrameLen,		 &TmpLen,
-							  9,						 RalinkIe,
-							  END_OF_ARGS);
-			FrameLen += TmpLen;
-		}
-#ifdef LEAP_SUPPORT
-		if (LEAP_CCKM_ON(pAd) && (pAd->StaCfg.CCKMLinkUpFlag == TRUE))
-		{
-			CkipFlag = pAd->StaCfg.CkipFlag;	// We have update that at PeerBeaconAtJoinRequest()
-			if (CkipFlag != 0)
-			{
-				NdisZeroMemory(CkipNegotiationBuffer, CKIP_NEGOTIATION_LENGTH);
-				CkipNegotiationBuffer[2] = 0x66;
-				// Make it try KP & MIC, since we have to follow the result from AssocRsp
-				CkipNegotiationBuffer[8] = 0x18;
-				CkipNegotiationBuffer[CKIP_NEGOTIATION_LENGTH - 1] = 0x22;
-
-				MakeOutgoingFrame(pOutBuffer + FrameLen,            &tmp,
-									1,                              &AironetCkipIe,
-									1,                              &AironetCkipLen,
-									AironetCkipLen,                 CkipNegotiationBuffer,
-									END_OF_ARGS);
-				FrameLen += tmp;
-			}
-
-			MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp,
-							1,                              &AironetIPAddressIE,
-							1,                              &AironetIPAddressLen,
-							AironetIPAddressLen,            AironetIPAddressBuffer,
-							END_OF_ARGS);
-			FrameLen += tmp;
-
-			//
-			// The RN is incremented before each reassociation request.
-			//
-			pAd->StaCfg.CCKMRN++;
-			//
-			// Calculate MIC = hmac-md5(krk, STA-ID|BSSID|RSNIE|TSF|RN);
-			//
-			COPY_MAC_ADDR(CalcMicBuffer, pAd->CurrentAddress);
-			CalcMicBufferLen = MAC_ADDR_LEN;
-			COPY_MAC_ADDR(CalcMicBuffer + CalcMicBufferLen, pAd->MlmeAux.Bssid);
-			CalcMicBufferLen += MAC_ADDR_LEN;
-			NdisMoveMemory(CalcMicBuffer + CalcMicBufferLen, CipherSuiteCiscoCCKM, CipherSuiteCiscoCCKMLen);
-			CalcMicBufferLen += CipherSuiteCiscoCCKMLen;
-			NdisMoveMemory(CalcMicBuffer + CalcMicBufferLen, (PUCHAR) &pAd->StaCfg.CCKMBeaconAtJoinTimeStamp, sizeof(pAd->StaCfg.CCKMBeaconAtJoinTimeStamp));
-			CalcMicBufferLen += sizeof(pAd->StaCfg.CCKMBeaconAtJoinTimeStamp);
-			NdisMoveMemory(CalcMicBuffer + CalcMicBufferLen, (PUCHAR)&pAd->StaCfg.CCKMRN, sizeof(pAd->StaCfg.CCKMRN));
-			CalcMicBufferLen += sizeof(pAd->StaCfg.CCKMRN);
-			hmac_md5(pAd->StaCfg.KRK, LEN_EAP_MICK, CalcMicBuffer, CalcMicBufferLen, MICMN);
-
-			//
-			// fill up CCKM reassociation request element
-			//
-			NdisMoveMemory(AironetCCKMReassocBuffer, AironetOUI, 4);
-			NdisMoveMemory(AironetCCKMReassocBuffer + 4, (PUCHAR)&pAd->StaCfg.CCKMBeaconAtJoinTimeStamp, 8);
-			NdisMoveMemory(AironetCCKMReassocBuffer + 12, (PUCHAR) &pAd->StaCfg.CCKMRN, 4);
-			NdisMoveMemory(AironetCCKMReassocBuffer +16, MICMN, 8);
-
-			MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp,
-							1,                      &AironetCCKMReassocIE,
-							1,                      &AironetCCKMReassocLen,
-							AironetCCKMReassocLen,  AironetCCKMReassocBuffer,
-							END_OF_ARGS);
-			FrameLen += tmp;
-
-			MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp,
-							CipherSuiteCiscoCCKMLen,CipherSuiteCiscoCCKM,
-							END_OF_ARGS);
-			FrameLen += tmp;
-		}
-#endif // LEAP_SUPPORT //
-
-		// Add CCX v2 request if CCX2 admin state is on
-		if (pAd->StaCfg.CCXControl.field.Enable == 1)
-		{
-			//
-			// Add CCX Version
-			//
-			MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp,
-						1,							&Ccx2Ie,
-						1,							&Ccx2Len,
-						Ccx2Len,				    Ccx2IeInfo,
-						END_OF_ARGS);
-			FrameLen += tmp;
-		}
-
-		MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-		MlmeFreeMemory(pAd, pOutBuffer);
-
-		RTMPSetTimer(&pAd->MlmeAux.ReassocTimer, Timeout); /* in mSec */
-		pAd->Mlme.AssocMachine.CurrState = REASSOC_WAIT_RSP;
-	}
-	else
-	{
-		DBGPRINT(RT_DEBUG_TRACE,("ASSOC - MlmeReassocReqAction() sanity check failed. BUG!!!! \n"));
-		pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-		Status = MLME_INVALID_FORMAT;
-		MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_REASSOC_CONF, 2, &Status);
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-		Upper layer issues disassoc request
-	Parameters:
-		Elem -
-
-	IRQL = PASSIVE_LEVEL
-
-	==========================================================================
- */
-VOID MlmeDisassocReqAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	PMLME_DISASSOC_REQ_STRUCT pDisassocReq;
-	HEADER_802_11         DisassocHdr;
-	PHEADER_802_11        pDisassocHdr;
-	PUCHAR                pOutBuffer = NULL;
-	ULONG                 FrameLen = 0;
-	NDIS_STATUS           NStatus;
-	BOOLEAN               TimerCancelled;
-	ULONG                 Timeout = 0;
-	USHORT                Status;
-
-#ifdef QOS_DLS_SUPPORT
-	// send DLS-TEAR_DOWN message,
-	if (pAd->CommonCfg.bDLSCapable)
-	{
-		UCHAR i;
-
-		// tear down local dls table entry
-		for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-		{
-			if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
-			{
-				RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
-				pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-				pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-			}
-		}
-
-		// tear down peer dls table entry
-		for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
-		{
-			if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
-			{
-				RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
-				pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
-				pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-			}
-		}
-	}
-#endif // QOS_DLS_SUPPORT //
-
-	// skip sanity check
-	pDisassocReq = (PMLME_DISASSOC_REQ_STRUCT)(Elem->Msg);
-
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-	if (NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - MlmeDisassocReqAction() allocate memory failed\n"));
-		pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-		Status = MLME_FAIL_NO_RESOURCE;
-		MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_DISASSOC_CONF, 2, &Status);
-		return;
-	}
-
-
-
-	RTMPCancelTimer(&pAd->MlmeAux.DisassocTimer, &TimerCancelled);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - Send DISASSOC request[BSSID::%02x:%02x:%02x:%02x:%02x:%02x (Reason=%d)\n",
-				pDisassocReq->Addr[0], pDisassocReq->Addr[1], pDisassocReq->Addr[2],
-				pDisassocReq->Addr[3], pDisassocReq->Addr[4], pDisassocReq->Addr[5], pDisassocReq->Reason));
-	MgtMacHeaderInit(pAd, &DisassocHdr, SUBTYPE_DISASSOC, 0, pDisassocReq->Addr, pDisassocReq->Addr);	// patch peap ttls switching issue
-	MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-					  sizeof(HEADER_802_11),&DisassocHdr,
-					  2,                    &pDisassocReq->Reason,
-					  END_OF_ARGS);
-	MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-
-	// To patch Instance and Buffalo(N) AP
-	// Driver has to send deauth to Instance AP, but Buffalo(N) needs to send disassoc to reset Authenticator's state machine
-	// Therefore, we send both of them.
-	pDisassocHdr = (PHEADER_802_11)pOutBuffer;
-	pDisassocHdr->FC.SubType = SUBTYPE_DEAUTH;
-	MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-	pAd->StaCfg.DisassocReason = REASON_DISASSOC_STA_LEAVING;
-	COPY_MAC_ADDR(pAd->StaCfg.DisassocSta, pDisassocReq->Addr);
-
-	RTMPSetTimer(&pAd->MlmeAux.DisassocTimer, Timeout); /* in mSec */
-	pAd->Mlme.AssocMachine.CurrState = DISASSOC_WAIT_RSP;
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-    if (pAd->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
-	{
-        union iwreq_data    wrqu;
-        //send disassociate event to wpa_supplicant
-        memset(&wrqu, 0, sizeof(wrqu));
-        wrqu.data.flags = RT_DISASSOC_EVENT_FLAG;
-        wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL);
-    }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-    {
-        union iwreq_data    wrqu;
-        memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN);
-        wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
-    }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-
-}
-
-/*
-	==========================================================================
-	Description:
-		peer sends assoc rsp back
-	Parameters:
-		Elme - MLME message containing the received frame
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID PeerAssocRspAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT        CapabilityInfo, Status, Aid;
-	UCHAR         SupRate[MAX_LEN_OF_SUPPORTED_RATES], SupRateLen;
-	UCHAR         ExtRate[MAX_LEN_OF_SUPPORTED_RATES], ExtRateLen;
-	UCHAR         Addr2[MAC_ADDR_LEN];
-	BOOLEAN       TimerCancelled;
-	UCHAR         CkipFlag;
-	EDCA_PARM     EdcaParm;
-	HT_CAPABILITY_IE		HtCapability;
-	ADD_HT_INFO_IE		AddHtInfo;	// AP might use this additional ht info IE
-	UCHAR			HtCapabilityLen;
-	UCHAR			AddHtInfoLen;
-	UCHAR			NewExtChannelOffset = 0xff;
-
-	if (PeerAssocRspSanity(pAd, Elem->Msg, Elem->MsgLen, Addr2, &CapabilityInfo, &Status, &Aid, SupRate, &SupRateLen, ExtRate, &ExtRateLen,
-		&HtCapability,&AddHtInfo, &HtCapabilityLen,&AddHtInfoLen,&NewExtChannelOffset, &EdcaParm, &CkipFlag))
-	{
-		// The frame is for me ?
-		if(MAC_ADDR_EQUAL(Addr2, pAd->MlmeAux.Bssid))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("PeerAssocRspAction():ASSOC - receive ASSOC_RSP to me (status=%d)\n", Status));
-#ifdef DOT11_N_SUPPORT
-			DBGPRINT(RT_DEBUG_TRACE, ("PeerAssocRspAction():MacTable [%d].AMsduSize = %d. ClientStatusFlags = 0x%lx \n",Elem->Wcid, pAd->MacTab.Content[BSSID_WCID].AMsduSize, pAd->MacTab.Content[BSSID_WCID].ClientStatusFlags));
-#endif // DOT11_N_SUPPORT //
-			RTMPCancelTimer(&pAd->MlmeAux.AssocTimer, &TimerCancelled);
-			if(Status == MLME_SUCCESS)
-			{
-				UCHAR			MaxSupportedRateIn500Kbps = 0;
-				UCHAR			idx;
-
-				// supported rates array may not be sorted. sort it and find the maximum rate
-			    for (idx=0; idx<SupRateLen; idx++)
-                {
-			        if (MaxSupportedRateIn500Kbps < (SupRate[idx] & 0x7f))
-			            MaxSupportedRateIn500Kbps = SupRate[idx] & 0x7f;
-                }
-
-				for (idx=0; idx<ExtRateLen; idx++)
-                {
-			        if (MaxSupportedRateIn500Kbps < (ExtRate[idx] & 0x7f))
-			            MaxSupportedRateIn500Kbps = ExtRate[idx] & 0x7f;
-                }
-				// go to procedure listed on page 376
-				AssocPostProc(pAd, Addr2, CapabilityInfo, Aid, SupRate, SupRateLen, ExtRate, ExtRateLen,
-					&EdcaParm, &HtCapability, HtCapabilityLen, &AddHtInfo);
-
-				StaAddMacTableEntry(pAd, &pAd->MacTab.Content[BSSID_WCID], MaxSupportedRateIn500Kbps, &HtCapability, HtCapabilityLen, CapabilityInfo);
-
-				pAd->StaCfg.CkipFlag = CkipFlag;
-				if (CkipFlag & 0x18)
-				{
-					NdisZeroMemory(pAd->StaCfg.TxSEQ, 4);
-					NdisZeroMemory(pAd->StaCfg.RxSEQ, 4);
-					NdisZeroMemory(pAd->StaCfg.CKIPMIC, 4);
-					pAd->StaCfg.GIV[0] = RandomByte(pAd);
-					pAd->StaCfg.GIV[1] = RandomByte(pAd);
-					pAd->StaCfg.GIV[2] = RandomByte(pAd);
-					pAd->StaCfg.bCkipOn = TRUE;
-					DBGPRINT(RT_DEBUG_TRACE, ("<CCX> pAd->StaCfg.CkipFlag = 0x%02x\n", pAd->StaCfg.CkipFlag));
-				}
-			}
-			else
-			{
-				// Faile on Association, we need to check the status code
-				// Is that a Rogue AP?
-#ifdef LEAP_SUPPORT
-				if ((pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP) && (Status == MLME_ALG_NOT_SUPPORT))
-				{ //Possibly Rogue AP
-					RogueApTableSetEntry(pAd, &pAd->StaCfg.RogueApTab, pAd->MlmeAux.Bssid, LEAP_REASON_INVALID_AUTH);
-				}
-#endif // LEAP_SUPPORT //
-			}
-			pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-			MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_ASSOC_CONF, 2, &Status);
-		}
-	}
-	else
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - PeerAssocRspAction() sanity check fail\n"));
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-		peer sends reassoc rsp
-	Parametrs:
-		Elem - MLME message cntaining the received frame
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID PeerReassocRspAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT      CapabilityInfo;
-	USHORT      Status;
-	USHORT      Aid;
-	UCHAR       SupRate[MAX_LEN_OF_SUPPORTED_RATES], SupRateLen;
-	UCHAR       ExtRate[MAX_LEN_OF_SUPPORTED_RATES], ExtRateLen;
-	UCHAR       Addr2[MAC_ADDR_LEN];
-	UCHAR       CkipFlag;
-	BOOLEAN     TimerCancelled;
-	EDCA_PARM   EdcaParm;
-	HT_CAPABILITY_IE		HtCapability;
-	ADD_HT_INFO_IE		AddHtInfo;	// AP might use this additional ht info IE
-	UCHAR			HtCapabilityLen;
-	UCHAR			AddHtInfoLen;
-	UCHAR			NewExtChannelOffset = 0xff;
-
-	if(PeerAssocRspSanity(pAd, Elem->Msg, Elem->MsgLen, Addr2, &CapabilityInfo, &Status, &Aid, SupRate, &SupRateLen, ExtRate, &ExtRateLen,
-								&HtCapability,	&AddHtInfo, &HtCapabilityLen, &AddHtInfoLen,&NewExtChannelOffset, &EdcaParm, &CkipFlag))
-	{
-		if(MAC_ADDR_EQUAL(Addr2, pAd->MlmeAux.Bssid)) // The frame is for me ?
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - receive REASSOC_RSP to me (status=%d)\n", Status));
-			RTMPCancelTimer(&pAd->MlmeAux.ReassocTimer, &TimerCancelled);
-
-			if(Status == MLME_SUCCESS)
-			{
-				// go to procedure listed on page 376
-				AssocPostProc(pAd, Addr2, CapabilityInfo, Aid, SupRate, SupRateLen, ExtRate, ExtRateLen,
-					 &EdcaParm, &HtCapability, HtCapabilityLen, &AddHtInfo);
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-                if (pAd->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
-                {
-                    union iwreq_data    wrqu;
-
-                    SendAssocIEsToWpaSupplicant(pAd);
-                    memset(&wrqu, 0, sizeof(wrqu));
-                    wrqu.data.flags = RT_ASSOC_EVENT_FLAG;
-                    wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL);
-                }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-                {
-                    union iwreq_data    wrqu;
-                    wext_notify_event_assoc(pAd);
-
-                    memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN);
-                    memcpy(wrqu.ap_addr.sa_data, pAd->MlmeAux.Bssid, MAC_ADDR_LEN);
-                    wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
-
-                }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-
-			}
-
-			//
-			// Cisco Leap CCKM supported Re-association.
-			//
-#ifdef LEAP_SUPPORT
-			if (LEAP_CCKM_ON(pAd) && (pAd->StaCfg.CCKMLinkUpFlag == TRUE))
-			{
-				if (CCKMAssocRspSanity(pAd, Elem->Msg, Elem->MsgLen) == TRUE)
-				{
-					pAd->StaCfg.CkipFlag = CkipFlag;
-					if (CkipFlag & 0x18)
-					{
-						NdisZeroMemory(pAd->StaCfg.TxSEQ, 4);
-						NdisZeroMemory(pAd->StaCfg.RxSEQ, 4);
-						NdisZeroMemory(pAd->StaCfg.CKIPMIC, 4);
-						pAd->StaCfg.GIV[0] = RandomByte(pAd);
-						pAd->StaCfg.GIV[1] = RandomByte(pAd);
-						pAd->StaCfg.GIV[2] = RandomByte(pAd);
-						pAd->StaCfg.bCkipOn = TRUE;
-						DBGPRINT(RT_DEBUG_TRACE, ("<CCX> pAd->StaCfg.CkipFlag = 0x%02x\n", pAd->StaCfg.CkipFlag));
-					}
-
-					pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-					MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_REASSOC_CONF, 2, &Status);
-				}
-				else
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - CCKMAssocRspSanity() sanity check fail\n"));
-				}
-			}
-			else
-#endif // LEAP_SUPPORT //
-			{
-				// CkipFlag is no use for reassociate
-				pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-				MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_REASSOC_CONF, 2, &Status);
-			}
-		}
-	}
-	else
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - PeerReassocRspAction() sanity check fail\n"));
-	}
-
-}
-
-/*
-	==========================================================================
-	Description:
-		procedures on IEEE 802.11/1999 p.376
-	Parametrs:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AssocPostProc(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pAddr2,
-	IN USHORT CapabilityInfo,
-	IN USHORT Aid,
-	IN UCHAR SupRate[],
-	IN UCHAR SupRateLen,
-	IN UCHAR ExtRate[],
-	IN UCHAR ExtRateLen,
-	IN PEDCA_PARM pEdcaParm,
-	IN HT_CAPABILITY_IE		*pHtCapability,
-	IN UCHAR HtCapabilityLen,
-	IN ADD_HT_INFO_IE		*pAddHtInfo)	// AP might use this additional ht info IE
-{
-	ULONG Idx;
-
-	pAd->MlmeAux.BssType = BSS_INFRA;
-	COPY_MAC_ADDR(pAd->MlmeAux.Bssid, pAddr2);
-	pAd->MlmeAux.Aid = Aid;
-	pAd->MlmeAux.CapabilityInfo = CapabilityInfo & SUPPORTED_CAPABILITY_INFO;
-#ifdef DOT11_N_SUPPORT
-	// Some HT AP might lost WMM IE. We add WMM ourselves. beacuase HT requires QoS on.
-	if ((HtCapabilityLen > 0) && (pEdcaParm->bValid == FALSE))
-	{
-		pEdcaParm->bValid = TRUE;
-		pEdcaParm->Aifsn[0] = 3;
-		pEdcaParm->Aifsn[1] = 7;
-		pEdcaParm->Aifsn[2] = 2;
-		pEdcaParm->Aifsn[3] = 2;
-
-		pEdcaParm->Cwmin[0] = 4;
-		pEdcaParm->Cwmin[1] = 4;
-		pEdcaParm->Cwmin[2] = 3;
-		pEdcaParm->Cwmin[3] = 2;
-
-		pEdcaParm->Cwmax[0] = 10;
-		pEdcaParm->Cwmax[1] = 10;
-		pEdcaParm->Cwmax[2] = 4;
-		pEdcaParm->Cwmax[3] = 3;
-
-		pEdcaParm->Txop[0]  = 0;
-		pEdcaParm->Txop[1]  = 0;
-		pEdcaParm->Txop[2]  = 96;
-		pEdcaParm->Txop[3]  = 48;
-
-	}
-#endif // DOT11_N_SUPPORT //
-
-	NdisMoveMemory(&pAd->MlmeAux.APEdcaParm, pEdcaParm, sizeof(EDCA_PARM));
-
-	// filter out un-supported rates
-	pAd->MlmeAux.SupRateLen = SupRateLen;
-	NdisMoveMemory(pAd->MlmeAux.SupRate, SupRate, SupRateLen);
-	RTMPCheckRates(pAd, pAd->MlmeAux.SupRate, &pAd->MlmeAux.SupRateLen);
-
-	// filter out un-supported rates
-	pAd->MlmeAux.ExtRateLen = ExtRateLen;
-	NdisMoveMemory(pAd->MlmeAux.ExtRate, ExtRate, ExtRateLen);
-	RTMPCheckRates(pAd, pAd->MlmeAux.ExtRate, &pAd->MlmeAux.ExtRateLen);
-
-#ifdef DOT11_N_SUPPORT
-	if (HtCapabilityLen > 0)
-	{
-		RTMPCheckHt(pAd, BSSID_WCID, pHtCapability, pAddHtInfo);
-	}
-	DBGPRINT(RT_DEBUG_TRACE, ("AssocPostProc===>  AP.AMsduSize = %d. ClientStatusFlags = 0x%lx \n", pAd->MacTab.Content[BSSID_WCID].AMsduSize, pAd->MacTab.Content[BSSID_WCID].ClientStatusFlags));
-
-	DBGPRINT(RT_DEBUG_TRACE, ("AssocPostProc===>    (Mmps=%d, AmsduSize=%d, )\n",
-		pAd->MacTab.Content[BSSID_WCID].MmpsMode, pAd->MacTab.Content[BSSID_WCID].AMsduSize));
-#endif // DOT11_N_SUPPORT //
-
-	// Set New WPA information
-	Idx = BssTableSearch(&pAd->ScanTab, pAddr2, pAd->MlmeAux.Channel);
-	if (Idx == BSS_NOT_FOUND)
-	{
-		DBGPRINT_ERR(("ASSOC - Can't find BSS after receiving Assoc response\n"));
-	}
-	else
-	{
-		// Init variable
-		pAd->MacTab.Content[BSSID_WCID].RSNIE_Len = 0;
-		NdisZeroMemory(pAd->MacTab.Content[BSSID_WCID].RSN_IE, MAX_LEN_OF_RSNIE);
-
-		// Store appropriate RSN_IE for WPA SM negotiation later
-		if ((pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA) && (pAd->ScanTab.BssEntry[Idx].VarIELen != 0))
-		{
-			PUCHAR              pVIE;
-			USHORT              len;
-			PEID_STRUCT         pEid;
-
-			pVIE = pAd->ScanTab.BssEntry[Idx].VarIEs;
-			len	 = pAd->ScanTab.BssEntry[Idx].VarIELen;
-
-			while (len > 0)
-			{
-				pEid = (PEID_STRUCT) pVIE;
-				// For WPA/WPAPSK
-				if ((pEid->Eid == IE_WPA) && (NdisEqualMemory(pEid->Octet, WPA_OUI, 4))
-					&& (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA || pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK))
-				{
-					NdisMoveMemory(pAd->MacTab.Content[BSSID_WCID].RSN_IE, pVIE, (pEid->Len + 2));
-					pAd->MacTab.Content[BSSID_WCID].RSNIE_Len = (pEid->Len + 2);
-					DBGPRINT(RT_DEBUG_TRACE, ("AssocPostProc===> Store RSN_IE for WPA SM negotiation \n"));
-				}
-				// For WPA2/WPA2PSK
-				else if ((pEid->Eid == IE_RSN) && (NdisEqualMemory(pEid->Octet + 2, RSN_OUI, 3))
-					&& (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2 || pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK))
-				{
-					NdisMoveMemory(pAd->MacTab.Content[BSSID_WCID].RSN_IE, pVIE, (pEid->Len + 2));
-					pAd->MacTab.Content[BSSID_WCID].RSNIE_Len = (pEid->Len + 2);
-					DBGPRINT(RT_DEBUG_TRACE, ("AssocPostProc===> Store RSN_IE for WPA2 SM negotiation \n"));
-				}
-
-				pVIE += (pEid->Len + 2);
-				len  -= (pEid->Len + 2);
-			}
-		}
-
-		if (pAd->MacTab.Content[BSSID_WCID].RSNIE_Len == 0)
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("AssocPostProc===> no RSN_IE \n"));
-		}
-		else
-		{
-			hex_dump("RSN_IE", pAd->MacTab.Content[BSSID_WCID].RSN_IE, pAd->MacTab.Content[BSSID_WCID].RSNIE_Len);
-		}
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-		left part of IEEE 802.11/1999 p.374
-	Parameters:
-		Elem - MLME message containing the received frame
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID PeerDisassocAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR         Addr2[MAC_ADDR_LEN];
-	USHORT        Reason;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - PeerDisassocAction()\n"));
-	if(PeerDisassocSanity(pAd, Elem->Msg, Elem->MsgLen, Addr2, &Reason))
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - PeerDisassocAction() Reason = %d\n", Reason));
-		if (INFRA_ON(pAd) && MAC_ADDR_EQUAL(pAd->CommonCfg.Bssid, Addr2))
-		{
-
-			if (pAd->CommonCfg.bWirelessEvent)
-			{
-				RTMPSendWirelessEvent(pAd, IW_DISASSOC_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-			}
-
-
-#ifdef LEAP_SUPPORT
-			if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-			{
-				// Cisco_LEAP has start a timer
-				// We should cancel it if using LEAP
-				RTMPCancelTimer(&pAd->StaCfg.LeapAuthTimer, &TimerCancelled);
-				//Check is it mach the LEAP Authentication failed as possible a Rogue AP
-				//on it's PortSecured not equal to WPA_802_1X_PORT_SECURED while process the Association.
-				if ((pAd->Mlme.LeapMachine.CurrState != LEAP_IDLE) && (pAd->StaCfg.PortSecured != WPA_802_1X_PORT_SECURED))
-				{
-					RogueApTableSetEntry(pAd, &pAd->StaCfg.RogueApTab, Addr2, LEAP_REASON_AUTH_TIMEOUT);
-				}
-			}
-#endif	// LEAP_SUPPORT //
-			//
-			// Get Current System time and Turn on AdjacentAPReport
-			//
-			NdisGetSystemUpTime(&pAd->StaCfg.CCXAdjacentAPLinkDownTime);
-			pAd->StaCfg.CCXAdjacentAPReportFlag = TRUE;
-			LinkDown(pAd, TRUE);
-			pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-            if (pAd->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
-			{
-                union iwreq_data    wrqu;
-                //send disassociate event to wpa_supplicant
-                memset(&wrqu, 0, sizeof(wrqu));
-                wrqu.data.flags = RT_DISASSOC_EVENT_FLAG;
-                wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL);
-            }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-            {
-                union iwreq_data    wrqu;
-                memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN);
-                wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
-            }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-		}
-	}
-	else
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - PeerDisassocAction() sanity check fail\n"));
-	}
-
-}
-
-/*
-	==========================================================================
-	Description:
-		what the state machine will do after assoc timeout
-	Parameters:
-		Elme -
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID AssocTimeoutAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT  Status;
-	DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - AssocTimeoutAction\n"));
-	pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-	Status = MLME_REJ_TIMEOUT;
-	MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_ASSOC_CONF, 2, &Status);
-}
-
-/*
-	==========================================================================
-	Description:
-		what the state machine will do after reassoc timeout
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID ReassocTimeoutAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT  Status;
-	DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - ReassocTimeoutAction\n"));
-	pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-	Status = MLME_REJ_TIMEOUT;
-	MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_REASSOC_CONF, 2, &Status);
-}
-
-/*
-	==========================================================================
-	Description:
-		what the state machine will do after disassoc timeout
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID DisassocTimeoutAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT  Status;
-	DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - DisassocTimeoutAction\n"));
-	pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-	Status = MLME_SUCCESS;
-	MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_DISASSOC_CONF, 2, &Status);
-}
-
-VOID InvalidStateWhenAssoc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT  Status;
-	DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - InvalidStateWhenAssoc(state=%ld), reset ASSOC state machine\n",
-		pAd->Mlme.AssocMachine.CurrState));
-	pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-	Status = MLME_STATE_MACHINE_REJECT;
-	MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_ASSOC_CONF, 2, &Status);
-}
-
-VOID InvalidStateWhenReassoc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT Status;
-	DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - InvalidStateWhenReassoc(state=%ld), reset ASSOC state machine\n",
-		pAd->Mlme.AssocMachine.CurrState));
-	pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-	Status = MLME_STATE_MACHINE_REJECT;
-	MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_REASSOC_CONF, 2, &Status);
-}
-
-VOID InvalidStateWhenDisassociate(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT Status;
-	DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - InvalidStateWhenDisassoc(state=%ld), reset ASSOC state machine\n",
-		pAd->Mlme.AssocMachine.CurrState));
-	pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-	Status = MLME_STATE_MACHINE_REJECT;
-	MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_DISASSOC_CONF, 2, &Status);
-}
-
-/*
-	==========================================================================
-	Description:
-		right part of IEEE 802.11/1999 page 374
-	Note:
-		This event should never cause ASSOC state machine perform state
-		transition, and has no relationship with CNTL machine. So we separate
-		this routine as a service outside of ASSOC state transition table.
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID Cls3errAction(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR        pAddr)
-{
-	HEADER_802_11         DisassocHdr;
-	PHEADER_802_11        pDisassocHdr;
-	PUCHAR                pOutBuffer = NULL;
-	ULONG                 FrameLen = 0;
-	NDIS_STATUS           NStatus;
-	USHORT                Reason = REASON_CLS3ERR;
-
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-	if (NStatus != NDIS_STATUS_SUCCESS)
-		return;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - Class 3 Error, Send DISASSOC frame\n"));
-	MgtMacHeaderInit(pAd, &DisassocHdr, SUBTYPE_DISASSOC, 0, pAddr, pAd->CommonCfg.Bssid);	// patch peap ttls switching issue
-	MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-					  sizeof(HEADER_802_11),&DisassocHdr,
-					  2,                    &Reason,
-					  END_OF_ARGS);
-	MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-
-	// To patch Instance and Buffalo(N) AP
-	// Driver has to send deauth to Instance AP, but Buffalo(N) needs to send disassoc to reset Authenticator's state machine
-	// Therefore, we send both of them.
-	pDisassocHdr = (PHEADER_802_11)pOutBuffer;
-	pDisassocHdr->FC.SubType = SUBTYPE_DEAUTH;
-	MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-	pAd->StaCfg.DisassocReason = REASON_CLS3ERR;
-	COPY_MAC_ADDR(pAd->StaCfg.DisassocSta, pAddr);
-}
-
- /*
-	 ==========================================================================
-	 Description:
-		 Switch between WEP and CKIP upon new association up.
-	 Parameters:
-
-	 IRQL = DISPATCH_LEVEL
-
-	 ==========================================================================
-  */
-VOID SwitchBetweenWepAndCkip(
-	IN PRTMP_ADAPTER pAd)
-{
-	int            i;
-	SHAREDKEY_MODE_STRUC  csr1;
-
-	// if KP is required. change the CipherAlg in hardware shard key table from WEP
-	// to CKIP. else remain as WEP
-	if (pAd->StaCfg.bCkipOn && (pAd->StaCfg.CkipFlag & 0x10))
-	{
-		// modify hardware key table so that MAC use correct algorithm to decrypt RX
-		RTMP_IO_READ32(pAd, SHARED_KEY_MODE_BASE, &csr1.word);
-		if (csr1.field.Bss0Key0CipherAlg == CIPHER_WEP64)
-			csr1.field.Bss0Key0CipherAlg = CIPHER_CKIP64;
-		else if (csr1.field.Bss0Key0CipherAlg == CIPHER_WEP128)
-			csr1.field.Bss0Key0CipherAlg = CIPHER_CKIP128;
-
-		if (csr1.field.Bss0Key1CipherAlg == CIPHER_WEP64)
-			csr1.field.Bss0Key1CipherAlg = CIPHER_CKIP64;
-		else if (csr1.field.Bss0Key1CipherAlg == CIPHER_WEP128)
-			csr1.field.Bss0Key1CipherAlg = CIPHER_CKIP128;
-
-		if (csr1.field.Bss0Key2CipherAlg == CIPHER_WEP64)
-			csr1.field.Bss0Key2CipherAlg = CIPHER_CKIP64;
-		else if (csr1.field.Bss0Key2CipherAlg == CIPHER_WEP128)
-			csr1.field.Bss0Key2CipherAlg = CIPHER_CKIP128;
-
-		if (csr1.field.Bss0Key3CipherAlg == CIPHER_WEP64)
-			csr1.field.Bss0Key3CipherAlg = CIPHER_CKIP64;
-		else if (csr1.field.Bss0Key3CipherAlg == CIPHER_WEP128)
-			csr1.field.Bss0Key3CipherAlg = CIPHER_CKIP128;
-		RTMP_IO_WRITE32(pAd, SHARED_KEY_MODE_BASE, csr1.word);
-		DBGPRINT(RT_DEBUG_TRACE, ("SwitchBetweenWepAndCkip: modify BSS0 cipher to %s\n", CipherName[csr1.field.Bss0Key0CipherAlg]));
-
-		// modify software key table so that driver can specify correct algorithm in TXD upon TX
-		for (i=0; i<SHARE_KEY_NUM; i++)
-		{
-			if (pAd->SharedKey[BSS0][i].CipherAlg == CIPHER_WEP64)
-				pAd->SharedKey[BSS0][i].CipherAlg = CIPHER_CKIP64;
-			else if (pAd->SharedKey[BSS0][i].CipherAlg == CIPHER_WEP128)
-				pAd->SharedKey[BSS0][i].CipherAlg = CIPHER_CKIP128;
-		}
-	}
-
-	// else if KP NOT inused. change the CipherAlg in hardware shard key table from CKIP
-	// to WEP.
-	else
-	{
-		// modify hardware key table so that MAC use correct algorithm to decrypt RX
-		RTMP_IO_READ32(pAd, SHARED_KEY_MODE_BASE, &csr1.word);
-		if (csr1.field.Bss0Key0CipherAlg == CIPHER_CKIP64)
-			csr1.field.Bss0Key0CipherAlg = CIPHER_WEP64;
-		else if (csr1.field.Bss0Key0CipherAlg == CIPHER_CKIP128)
-			csr1.field.Bss0Key0CipherAlg = CIPHER_WEP128;
-
-		if (csr1.field.Bss0Key1CipherAlg == CIPHER_CKIP64)
-			csr1.field.Bss0Key1CipherAlg = CIPHER_WEP64;
-		else if (csr1.field.Bss0Key1CipherAlg == CIPHER_CKIP128)
-			csr1.field.Bss0Key1CipherAlg = CIPHER_WEP128;
-
-		if (csr1.field.Bss0Key2CipherAlg == CIPHER_CKIP64)
-			csr1.field.Bss0Key2CipherAlg = CIPHER_WEP64;
-		else if (csr1.field.Bss0Key2CipherAlg == CIPHER_CKIP128)
-			csr1.field.Bss0Key2CipherAlg = CIPHER_WEP128;
-
-		if (csr1.field.Bss0Key3CipherAlg == CIPHER_CKIP64)
-			csr1.field.Bss0Key3CipherAlg = CIPHER_WEP64;
-		else if (csr1.field.Bss0Key3CipherAlg == CIPHER_CKIP128)
-			csr1.field.Bss0Key3CipherAlg = CIPHER_WEP128;
-
-		// modify software key table so that driver can specify correct algorithm in TXD upon TX
-		for (i=0; i<SHARE_KEY_NUM; i++)
-		{
-			if (pAd->SharedKey[BSS0][i].CipherAlg == CIPHER_CKIP64)
-				pAd->SharedKey[BSS0][i].CipherAlg = CIPHER_WEP64;
-			else if (pAd->SharedKey[BSS0][i].CipherAlg == CIPHER_CKIP128)
-				pAd->SharedKey[BSS0][i].CipherAlg = CIPHER_WEP128;
-		}
-
-		//
-		// On WPA-NONE, must update CipherAlg.
-		// Because the OID_802_11_WEP_STATUS was been set after OID_802_11_ADD_KEY
-		// and CipherAlg will be CIPHER_NONE by Windows ZeroConfig.
-		// So we need to update CipherAlg after connect.
-		//
-		if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
-		{
-			for (i = 0; i < SHARE_KEY_NUM; i++)
-			{
-				if (pAd->SharedKey[BSS0][i].KeyLen != 0)
-				{
-					if (pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled)
-					{
-						pAd->SharedKey[BSS0][i].CipherAlg = CIPHER_TKIP;
-					}
-					else if (pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled)
-					{
-						pAd->SharedKey[BSS0][i].CipherAlg = CIPHER_AES;
-					}
-				}
-				else
-				{
-					pAd->SharedKey[BSS0][i].CipherAlg = CIPHER_NONE;
-				}
-			}
-
-			csr1.field.Bss0Key0CipherAlg = pAd->SharedKey[BSS0][0].CipherAlg;
-			csr1.field.Bss0Key1CipherAlg = pAd->SharedKey[BSS0][1].CipherAlg;
-			csr1.field.Bss0Key2CipherAlg = pAd->SharedKey[BSS0][2].CipherAlg;
-			csr1.field.Bss0Key3CipherAlg = pAd->SharedKey[BSS0][3].CipherAlg;
-		}
-		RTMP_IO_WRITE32(pAd, SHARED_KEY_MODE_BASE, csr1.word);
-		DBGPRINT(RT_DEBUG_TRACE, ("SwitchBetweenWepAndCkip: modify BSS0 cipher to %s\n", CipherName[csr1.field.Bss0Key0CipherAlg]));
-	}
-}
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-VOID    SendAssocIEsToWpaSupplicant(
-    IN  PRTMP_ADAPTER pAd)
-{
-    union iwreq_data    wrqu;
-    unsigned char custom[IW_CUSTOM_MAX] = {0};
-
-    if ((pAd->StaCfg.ReqVarIELen + 17) <= IW_CUSTOM_MAX)
-    {
-        sprintf(custom, "ASSOCINFO_ReqIEs=");
-	    NdisMoveMemory(custom+17, pAd->StaCfg.ReqVarIEs, pAd->StaCfg.ReqVarIELen);
-	    memset(&wrqu, 0, sizeof(wrqu));
-        wrqu.data.length = pAd->StaCfg.ReqVarIELen + 17;
-        wrqu.data.flags = RT_REQIE_EVENT_FLAG;
-        wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, custom);
-
-        memset(&wrqu, 0, sizeof(wrqu));
-        wrqu.data.flags = RT_ASSOCINFO_EVENT_FLAG;
-        wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL);
-    }
-    else
-        DBGPRINT(RT_DEBUG_TRACE, ("pAd->StaCfg.ReqVarIELen + 17 > MAX_CUSTOM_LEN\n"));
-
-    return;
-}
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-int wext_notify_event_assoc(
-	IN  RTMP_ADAPTER *pAd)
-{
-    union iwreq_data    wrqu;
-    char custom[IW_CUSTOM_MAX] = {0};
-
-#if WIRELESS_EXT > 17
-    if (pAd->StaCfg.ReqVarIELen <= IW_CUSTOM_MAX)
-    {
-        wrqu.data.length = pAd->StaCfg.ReqVarIELen;
-        memcpy(custom, pAd->StaCfg.ReqVarIEs, pAd->StaCfg.ReqVarIELen);
-        wireless_send_event(pAd->net_dev, IWEVASSOCREQIE, &wrqu, custom);
-    }
-    else
-        DBGPRINT(RT_DEBUG_TRACE, ("pAd->StaCfg.ReqVarIELen > MAX_CUSTOM_LEN\n"));
-#else
-    if (((pAd->StaCfg.ReqVarIELen*2) + 17) <= IW_CUSTOM_MAX)
-    {
-        UCHAR   idx;
-        wrqu.data.length = (pAd->StaCfg.ReqVarIELen*2) + 17;
-        sprintf(custom, "ASSOCINFO(ReqIEs=");
-        for (idx=0; idx<pAd->StaCfg.ReqVarIELen; idx++)
-                sprintf(custom, "%s%02x", custom, pAd->StaCfg.ReqVarIEs[idx]);
-        wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, custom);
-    }
-    else
-        DBGPRINT(RT_DEBUG_TRACE, ("(pAd->StaCfg.ReqVarIELen*2) + 17 > MAX_CUSTOM_LEN\n"));
-#endif
-
-	return 0;
-
-}
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-
-
-BOOLEAN StaAddMacTableEntry(
-	IN  PRTMP_ADAPTER		pAd,
-	IN  PMAC_TABLE_ENTRY	pEntry,
-	IN  UCHAR				MaxSupportedRateIn500Kbps,
-	IN  HT_CAPABILITY_IE	*pHtCapability,
-	IN  UCHAR				HtCapabilityLen,
-	IN  USHORT        		CapabilityInfo)
-{
-	UCHAR            MaxSupportedRate = RATE_11;
-
-	if (ADHOC_ON(pAd))
-		CLIENT_STATUS_CLEAR_FLAG(pEntry, fCLIENT_STATUS_WMM_CAPABLE);
-
-	switch (MaxSupportedRateIn500Kbps)
-    {
-        case 108: MaxSupportedRate = RATE_54;   break;
-        case 96:  MaxSupportedRate = RATE_48;   break;
-        case 72:  MaxSupportedRate = RATE_36;   break;
-        case 48:  MaxSupportedRate = RATE_24;   break;
-        case 36:  MaxSupportedRate = RATE_18;   break;
-        case 24:  MaxSupportedRate = RATE_12;   break;
-        case 18:  MaxSupportedRate = RATE_9;    break;
-        case 12:  MaxSupportedRate = RATE_6;    break;
-        case 22:  MaxSupportedRate = RATE_11;   break;
-        case 11:  MaxSupportedRate = RATE_5_5;  break;
-        case 4:   MaxSupportedRate = RATE_2;    break;
-        case 2:   MaxSupportedRate = RATE_1;    break;
-        default:  MaxSupportedRate = RATE_11;   break;
-    }
-
-    if ((pAd->CommonCfg.PhyMode == PHY_11G) && (MaxSupportedRate < RATE_FIRST_OFDM_RATE))
-        return FALSE;
-
-#ifdef DOT11_N_SUPPORT
-	// 11n only
-	if (((pAd->CommonCfg.PhyMode == PHY_11N_2_4G) || (pAd->CommonCfg.PhyMode == PHY_11N_5G))&& (HtCapabilityLen == 0))
-		return FALSE;
-#endif // DOT11_N_SUPPORT //
-
-	if (!pEntry)
-        return FALSE;
-
-	NdisAcquireSpinLock(&pAd->MacTabLock);
-	if (pEntry)
-	{
-		pEntry->PortSecured = WPA_802_1X_PORT_SECURED;
-		if ((MaxSupportedRate < RATE_FIRST_OFDM_RATE) ||
-			(pAd->CommonCfg.PhyMode == PHY_11B))
-		{
-			pEntry->RateLen = 4;
-			if (MaxSupportedRate >= RATE_FIRST_OFDM_RATE)
-				MaxSupportedRate = RATE_11;
-		}
-		else
-			pEntry->RateLen = 12;
-
-		pEntry->MaxHTPhyMode.word = 0;
-		pEntry->MinHTPhyMode.word = 0;
-		pEntry->HTPhyMode.word = 0;
-		pEntry->MaxSupportedRate = MaxSupportedRate;
-		if (pEntry->MaxSupportedRate < RATE_FIRST_OFDM_RATE)
-		{
-			pEntry->MaxHTPhyMode.field.MODE = MODE_CCK;
-			pEntry->MaxHTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-			pEntry->MinHTPhyMode.field.MODE = MODE_CCK;
-			pEntry->MinHTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-			pEntry->HTPhyMode.field.MODE = MODE_CCK;
-			pEntry->HTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-		}
-		else
-		{
-			pEntry->MaxHTPhyMode.field.MODE = MODE_OFDM;
-			pEntry->MaxHTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-			pEntry->MinHTPhyMode.field.MODE = MODE_OFDM;
-			pEntry->MinHTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-			pEntry->HTPhyMode.field.MODE = MODE_OFDM;
-			pEntry->HTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-		}
-		pEntry->CapabilityInfo = CapabilityInfo;
-		CLIENT_STATUS_CLEAR_FLAG(pEntry, fCLIENT_STATUS_AGGREGATION_CAPABLE);
-		CLIENT_STATUS_CLEAR_FLAG(pEntry, fCLIENT_STATUS_PIGGYBACK_CAPABLE);
-	}
-
-#ifdef DOT11_N_SUPPORT
-	// If this Entry supports 802.11n, upgrade to HT rate.
-	if ((HtCapabilityLen != 0) && (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
-	{
-		UCHAR	j, bitmask; //k,bitmask;
-		CHAR    i;
-
-		if (ADHOC_ON(pAd))
-			CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_WMM_CAPABLE);
-		if ((pHtCapability->HtCapInfo.GF) && (pAd->CommonCfg.DesiredHtPhy.GF))
-		{
-			pEntry->MaxHTPhyMode.field.MODE = MODE_HTGREENFIELD;
-		}
-		else
-		{
-			pEntry->MaxHTPhyMode.field.MODE = MODE_HTMIX;
-			pAd->MacTab.fAnyStationNonGF = TRUE;
-			pAd->CommonCfg.AddHTInfo.AddHtInfo2.NonGfPresent = 1;
-		}
-
-		if ((pHtCapability->HtCapInfo.ChannelWidth) && (pAd->CommonCfg.DesiredHtPhy.ChannelWidth))
-		{
-			pEntry->MaxHTPhyMode.field.BW= BW_40;
-			pEntry->MaxHTPhyMode.field.ShortGI = ((pAd->CommonCfg.DesiredHtPhy.ShortGIfor40)&(pHtCapability->HtCapInfo.ShortGIfor40));
-		}
-		else
-		{
-			pEntry->MaxHTPhyMode.field.BW = BW_20;
-			pEntry->MaxHTPhyMode.field.ShortGI = ((pAd->CommonCfg.DesiredHtPhy.ShortGIfor20)&(pHtCapability->HtCapInfo.ShortGIfor20));
-			pAd->MacTab.fAnyStation20Only = TRUE;
-		}
-
-		// 3*3
-		if (pAd->MACVersion >= RALINK_2883_VERSION && pAd->MACVersion < RALINK_3070_VERSION)
-			pEntry->MaxHTPhyMode.field.TxBF = pAd->CommonCfg.RegTransmitSetting.field.TxBF;
-
-		// find max fixed rate
-		for (i=23; i>=0; i--) // 3*3
-		{
-			j = i/8;
-			bitmask = (1<<(i-(j*8)));
-			if ((pAd->StaCfg.DesiredHtPhyInfo.MCSSet[j] & bitmask) && (pHtCapability->MCSSet[j] & bitmask))
-			{
-				pEntry->MaxHTPhyMode.field.MCS = i;
-				break;
-			}
-			if (i==0)
-				break;
-		}
-
-
-		if (pAd->StaCfg.DesiredTransmitSetting.field.MCS != MCS_AUTO)
-		{
-			if (pAd->StaCfg.DesiredTransmitSetting.field.MCS == 32)
-			{
-				// Fix MCS as HT Duplicated Mode
-				pEntry->MaxHTPhyMode.field.BW = 1;
-				pEntry->MaxHTPhyMode.field.MODE = MODE_HTMIX;
-				pEntry->MaxHTPhyMode.field.STBC = 0;
-				pEntry->MaxHTPhyMode.field.ShortGI = 0;
-				pEntry->MaxHTPhyMode.field.MCS = 32;
-			}
-			else if (pEntry->MaxHTPhyMode.field.MCS > pAd->StaCfg.HTPhyMode.field.MCS)
-			{
-				// STA supports fixed MCS
-				pEntry->MaxHTPhyMode.field.MCS = pAd->StaCfg.HTPhyMode.field.MCS;
-			}
-		}
-
-		pEntry->MaxHTPhyMode.field.STBC = (pHtCapability->HtCapInfo.RxSTBC & (pAd->CommonCfg.DesiredHtPhy.TxSTBC));
-		pEntry->MpduDensity = pHtCapability->HtCapParm.MpduDensity;
-		pEntry->MaxRAmpduFactor = pHtCapability->HtCapParm.MaxRAmpduFactor;
-		pEntry->MmpsMode = (UCHAR)pHtCapability->HtCapInfo.MimoPs;
-		pEntry->AMsduSize = (UCHAR)pHtCapability->HtCapInfo.AMsduSize;
-		pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word;
-
-		if (pAd->CommonCfg.DesiredHtPhy.AmsduEnable && (pAd->CommonCfg.REGBACapability.field.AutoBA == FALSE))
-			CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_AMSDU_INUSED);
-		if (pHtCapability->HtCapInfo.ShortGIfor20)
-			CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI20_CAPABLE);
-		if (pHtCapability->HtCapInfo.ShortGIfor40)
-			CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI40_CAPABLE);
-		if (pHtCapability->HtCapInfo.TxSTBC)
-			CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_TxSTBC_CAPABLE);
-		if (pHtCapability->HtCapInfo.RxSTBC)
-			CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RxSTBC_CAPABLE);
-		if (pHtCapability->ExtHtCapInfo.PlusHTC)
-			CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_HTC_CAPABLE);
-		if (pAd->CommonCfg.bRdg && pHtCapability->ExtHtCapInfo.RDGSupport)
-			CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RDG_CAPABLE);
-		if (pHtCapability->ExtHtCapInfo.MCSFeedback == 0x03)
-			CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_MCSFEEDBACK_CAPABLE);
-	}
-	else
-	{
-		pAd->MacTab.fAnyStationIsLegacy = TRUE;
-	}
-
-	NdisMoveMemory(&pEntry->HTCapability, pHtCapability, sizeof(HT_CAPABILITY_IE));
-#endif // DOT11_N_SUPPORT //
-
-	pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word;
-	pEntry->CurrTxRate = pEntry->MaxSupportedRate;
-
-	// Set asic auto fall back
-	if (pAd->StaCfg.bAutoTxRateSwitch == TRUE)
-	{
-		PUCHAR					pTable;
-		UCHAR					TableSize = 0;
-
-		MlmeSelectTxRateTable(pAd, pEntry, &pTable, &TableSize, &pEntry->CurrTxRateIndex);
-		pEntry->bAutoTxRateSwitch = TRUE;
-	}
-	else
-	{
-		pEntry->HTPhyMode.field.MODE	= pAd->StaCfg.HTPhyMode.field.MODE;
-		pEntry->HTPhyMode.field.MCS	= pAd->StaCfg.HTPhyMode.field.MCS;
-		pEntry->bAutoTxRateSwitch = FALSE;
-
-		// If the legacy mode is set, overwrite the transmit setting of this entry.
-		RTMPUpdateLegacyTxSetting((UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode, pEntry);
-	}
-
-	pEntry->PortSecured = WPA_802_1X_PORT_SECURED;
-	pEntry->Sst = SST_ASSOC;
-	pEntry->AuthState = AS_AUTH_OPEN;
-	pEntry->AuthMode = pAd->StaCfg.AuthMode;
-	pEntry->WepStatus = pAd->StaCfg.WepStatus;
-
-	NdisReleaseSpinLock(&pAd->MacTabLock);
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-    if (pAd->StaCfg.WpaSupplicantUP)
-    {
-        union iwreq_data    wrqu;
-
-        SendAssocIEsToWpaSupplicant(pAd);
-        memset(&wrqu, 0, sizeof(wrqu));
-        wrqu.data.flags = RT_ASSOC_EVENT_FLAG;
-        wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL);
-    }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-    {
-        union iwreq_data    wrqu;
-        wext_notify_event_assoc(pAd);
-
-        memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN);
-        memcpy(wrqu.ap_addr.sa_data, pAd->MlmeAux.Bssid, MAC_ADDR_LEN);
-        wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
-
-    }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-	return TRUE;
-}
-
-
+#include "../../rt2870/sta/assoc.c"
diff --git a/drivers/staging/rt3070/sta/auth.c b/drivers/staging/rt3070/sta/auth.c
index 032b5df058b..d55198288d9 100644
--- a/drivers/staging/rt3070/sta/auth.c
+++ b/drivers/staging/rt3070/sta/auth.c
@@ -1,475 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	auth.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	John		2004-9-3		porting from RT2500
-*/
-#include "../rt_config.h"
-
-/*
-    ==========================================================================
-    Description:
-        authenticate state machine init, including state transition and timer init
-    Parameters:
-        Sm - pointer to the auth state machine
-    Note:
-        The state machine looks like this
-
-                        AUTH_REQ_IDLE           AUTH_WAIT_SEQ2                   AUTH_WAIT_SEQ4
-    MT2_MLME_AUTH_REQ   mlme_auth_req_action    invalid_state_when_auth          invalid_state_when_auth
-    MT2_PEER_AUTH_EVEN  drop                    peer_auth_even_at_seq2_action    peer_auth_even_at_seq4_action
-    MT2_AUTH_TIMEOUT    Drop                    auth_timeout_action              auth_timeout_action
-
-	IRQL = PASSIVE_LEVEL
-
-    ==========================================================================
- */
-
-void AuthStateMachineInit(
-    IN PRTMP_ADAPTER pAd,
-    IN STATE_MACHINE *Sm,
-    OUT STATE_MACHINE_FUNC Trans[])
-{
-    StateMachineInit(Sm, Trans, MAX_AUTH_STATE, MAX_AUTH_MSG, (STATE_MACHINE_FUNC)Drop, AUTH_REQ_IDLE, AUTH_MACHINE_BASE);
-
-    // the first column
-    StateMachineSetAction(Sm, AUTH_REQ_IDLE, MT2_MLME_AUTH_REQ, (STATE_MACHINE_FUNC)MlmeAuthReqAction);
-
-    // the second column
-    StateMachineSetAction(Sm, AUTH_WAIT_SEQ2, MT2_MLME_AUTH_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenAuth);
-    StateMachineSetAction(Sm, AUTH_WAIT_SEQ2, MT2_PEER_AUTH_EVEN, (STATE_MACHINE_FUNC)PeerAuthRspAtSeq2Action);
-    StateMachineSetAction(Sm, AUTH_WAIT_SEQ2, MT2_AUTH_TIMEOUT, (STATE_MACHINE_FUNC)AuthTimeoutAction);
-
-    // the third column
-    StateMachineSetAction(Sm, AUTH_WAIT_SEQ4, MT2_MLME_AUTH_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenAuth);
-    StateMachineSetAction(Sm, AUTH_WAIT_SEQ4, MT2_PEER_AUTH_EVEN, (STATE_MACHINE_FUNC)PeerAuthRspAtSeq4Action);
-    StateMachineSetAction(Sm, AUTH_WAIT_SEQ4, MT2_AUTH_TIMEOUT, (STATE_MACHINE_FUNC)AuthTimeoutAction);
-
-	RTMPInitTimer(pAd, &pAd->MlmeAux.AuthTimer, GET_TIMER_FUNCTION(AuthTimeout), pAd, FALSE);
-}
-
-/*
-    ==========================================================================
-    Description:
-        function to be executed at timer thread when auth timer expires
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID AuthTimeout(
-    IN PVOID SystemSpecific1,
-    IN PVOID FunctionContext,
-    IN PVOID SystemSpecific2,
-    IN PVOID SystemSpecific3)
-{
-    RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;
-
-    DBGPRINT(RT_DEBUG_TRACE,("AUTH - AuthTimeout\n"));
-
-	// Do nothing if the driver is starting halt state.
-	// This might happen when timer already been fired before cancel timer with mlmehalt
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
-		return;
-
-	// send a de-auth to reset AP's state machine (Patch AP-Dir635)
-	if (pAd->Mlme.AuthMachine.CurrState == AUTH_WAIT_SEQ2)
-		Cls2errAction(pAd, pAd->MlmeAux.Bssid);
-
-
-    MlmeEnqueue(pAd, AUTH_STATE_MACHINE, MT2_AUTH_TIMEOUT, 0, NULL);
-    RT28XX_MLME_HANDLER(pAd);
-}
-
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID MlmeAuthReqAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-    UCHAR              Addr[6];
-    USHORT             Alg, Seq, Status;
-    ULONG              Timeout;
-    HEADER_802_11      AuthHdr;
-    BOOLEAN            TimerCancelled;
-    NDIS_STATUS        NStatus;
-    PUCHAR             pOutBuffer = NULL;
-    ULONG              FrameLen = 0;
-
-	// Block all authentication request durning WPA block period
-	if (pAd->StaCfg.bBlockAssoc == TRUE)
-	{
-        DBGPRINT(RT_DEBUG_TRACE, ("AUTH - Block Auth request durning WPA block period!\n"));
-        pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
-        Status = MLME_STATE_MACHINE_REJECT;
-        MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_AUTH_CONF, 2, &Status);
-	}
-    else if(MlmeAuthReqSanity(pAd, Elem->Msg, Elem->MsgLen, Addr, &Timeout, &Alg))
-    {
-        // reset timer
-        RTMPCancelTimer(&pAd->MlmeAux.AuthTimer, &TimerCancelled);
-        COPY_MAC_ADDR(pAd->MlmeAux.Bssid, Addr);
-        pAd->MlmeAux.Alg  = Alg;
-        Seq = 1;
-        Status = MLME_SUCCESS;
-
-        NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-        if(NStatus != NDIS_STATUS_SUCCESS)
-        {
-            DBGPRINT(RT_DEBUG_TRACE, ("AUTH - MlmeAuthReqAction(Alg:%d) allocate memory failed\n", Alg));
-            pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
-            Status = MLME_FAIL_NO_RESOURCE;
-            MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_AUTH_CONF, 2, &Status);
-            return;
-        }
-
-        DBGPRINT(RT_DEBUG_TRACE, ("AUTH - Send AUTH request seq#1 (Alg=%d)...\n", Alg));
-        MgtMacHeaderInit(pAd, &AuthHdr, SUBTYPE_AUTH, 0, Addr, pAd->MlmeAux.Bssid);
-        MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-                          sizeof(HEADER_802_11),&AuthHdr,
-                          2,                    &Alg,
-                          2,                    &Seq,
-                          2,                    &Status,
-                          END_OF_ARGS);
-        MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-    	MlmeFreeMemory(pAd, pOutBuffer);
-
-        RTMPSetTimer(&pAd->MlmeAux.AuthTimer, Timeout);
-        pAd->Mlme.AuthMachine.CurrState = AUTH_WAIT_SEQ2;
-    }
-    else
-    {
-        DBGPRINT_ERR(("AUTH - MlmeAuthReqAction() sanity check failed\n"));
-        pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
-        Status = MLME_INVALID_FORMAT;
-        MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_AUTH_CONF, 2, &Status);
-    }
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID PeerAuthRspAtSeq2Action(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-    UCHAR         Addr2[MAC_ADDR_LEN];
-    USHORT        Seq, Status, RemoteStatus, Alg;
-    UCHAR         ChlgText[CIPHER_TEXT_LEN];
-    UCHAR         CyperChlgText[CIPHER_TEXT_LEN + 8 + 8];
-    UCHAR         Element[2];
-    HEADER_802_11 AuthHdr;
-    BOOLEAN       TimerCancelled;
-    PUCHAR        pOutBuffer = NULL;
-    NDIS_STATUS   NStatus;
-    ULONG         FrameLen = 0;
-    USHORT        Status2;
-
-    if (PeerAuthSanity(pAd, Elem->Msg, Elem->MsgLen, Addr2, &Alg, &Seq, &Status, ChlgText))
-    {
-        if (MAC_ADDR_EQUAL(pAd->MlmeAux.Bssid, Addr2) && Seq == 2)
-        {
-            DBGPRINT(RT_DEBUG_TRACE, ("AUTH - Receive AUTH_RSP seq#2 to me (Alg=%d, Status=%d)\n", Alg, Status));
-            RTMPCancelTimer(&pAd->MlmeAux.AuthTimer, &TimerCancelled);
-
-            if (Status == MLME_SUCCESS)
-            {
-                // Authentication Mode "LEAP" has allow for CCX 1.X
-                if ((pAd->MlmeAux.Alg == Ndis802_11AuthModeOpen)
-#ifdef LEAP_SUPPORT
-					|| (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-#endif // LEAP_SUPPORT //
-				)
-                {
-                    pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
-#ifdef LEAP_SUPPORT
-                    pAd->Mlme.LeapMachine.CurrState = LEAP_IDLE;
-#endif // LEAP_SUPPORT //
-                    MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_AUTH_CONF, 2, &Status);
-                }
-                else
-                {
-                    // 2. shared key, need to be challenged
-                    Seq++;
-                    RemoteStatus = MLME_SUCCESS;
-
-					// Get an unused nonpaged memory
-                    NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);
-                    if(NStatus != NDIS_STATUS_SUCCESS)
-                    {
-                        DBGPRINT(RT_DEBUG_TRACE, ("AUTH - PeerAuthRspAtSeq2Action() allocate memory fail\n"));
-                        pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
-                        Status2 = MLME_FAIL_NO_RESOURCE;
-                        MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_AUTH_CONF, 2, &Status2);
-                        return;
-                    }
-
-                    DBGPRINT(RT_DEBUG_TRACE, ("AUTH - Send AUTH request seq#3...\n"));
-                    MgtMacHeaderInit(pAd, &AuthHdr, SUBTYPE_AUTH, 0, Addr2, pAd->MlmeAux.Bssid);
-                    AuthHdr.FC.Wep = 1;
-                    // Encrypt challenge text & auth information
-                    RTMPInitWepEngine(
-                    	pAd,
-                    	pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key,
-                    	pAd->StaCfg.DefaultKeyId,
-                    	pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].KeyLen,
-                    	CyperChlgText);
-
-					Alg = cpu2le16(*(USHORT *)&Alg);
-					Seq = cpu2le16(*(USHORT *)&Seq);
-					RemoteStatus= cpu2le16(*(USHORT *)&RemoteStatus);
-
-					RTMPEncryptData(pAd, (PUCHAR) &Alg, CyperChlgText + 4, 2);
-					RTMPEncryptData(pAd, (PUCHAR) &Seq, CyperChlgText + 6, 2);
-					RTMPEncryptData(pAd, (PUCHAR) &RemoteStatus, CyperChlgText + 8, 2);
-					Element[0] = 16;
-					Element[1] = 128;
-					RTMPEncryptData(pAd, Element, CyperChlgText + 10, 2);
-					RTMPEncryptData(pAd, ChlgText, CyperChlgText + 12, 128);
-					RTMPSetICV(pAd, CyperChlgText + 140);
-                    MakeOutgoingFrame(pOutBuffer,               &FrameLen,
-                                      sizeof(HEADER_802_11),    &AuthHdr,
-                                      CIPHER_TEXT_LEN + 16,     CyperChlgText,
-                                      END_OF_ARGS);
-                    MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-                	MlmeFreeMemory(pAd, pOutBuffer);
-
-                    RTMPSetTimer(&pAd->MlmeAux.AuthTimer, AUTH_TIMEOUT);
-                    pAd->Mlme.AuthMachine.CurrState = AUTH_WAIT_SEQ4;
-                }
-            }
-            else
-            {
-#ifdef LEAP_SUPPORT
-                if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-                {
-                    //Invalid Authentication possible rogue AP
-                    //Add this Ap to Rogue AP.
-                    RogueApTableSetEntry(pAd, &pAd->StaCfg.RogueApTab, Addr2, LEAP_REASON_INVALID_AUTH);
-				}
-#endif // LEAP_SUPPORT //
-                pAd->StaCfg.AuthFailReason = Status;
-                COPY_MAC_ADDR(pAd->StaCfg.AuthFailSta, Addr2);
-                pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
-                MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_AUTH_CONF, 2, &Status);
-            }
-        }
-    }
-    else
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("AUTH - PeerAuthSanity() sanity check fail\n"));
-    }
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID PeerAuthRspAtSeq4Action(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-    UCHAR         Addr2[MAC_ADDR_LEN];
-    USHORT        Alg, Seq, Status;
-    CHAR          ChlgText[CIPHER_TEXT_LEN];
-    BOOLEAN       TimerCancelled;
-
-    if(PeerAuthSanity(pAd, Elem->Msg, Elem->MsgLen, Addr2, &Alg, &Seq, &Status, ChlgText))
-    {
-        if(MAC_ADDR_EQUAL(pAd->MlmeAux.Bssid, Addr2) && Seq == 4)
-        {
-            DBGPRINT(RT_DEBUG_TRACE, ("AUTH - Receive AUTH_RSP seq#4 to me\n"));
-            RTMPCancelTimer(&pAd->MlmeAux.AuthTimer, &TimerCancelled);
-
-            if (Status != MLME_SUCCESS)
-            {
-                pAd->StaCfg.AuthFailReason = Status;
-                COPY_MAC_ADDR(pAd->StaCfg.AuthFailSta, Addr2);
-            }
-
-            pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
-            MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_AUTH_CONF, 2, &Status);
-        }
-    }
-    else
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("AUTH - PeerAuthRspAtSeq4Action() sanity check fail\n"));
-    }
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID MlmeDeauthReqAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-    MLME_DEAUTH_REQ_STRUCT *pInfo;
-    HEADER_802_11 DeauthHdr;
-    PUCHAR        pOutBuffer = NULL;
-    NDIS_STATUS   NStatus;
-    ULONG         FrameLen = 0;
-    USHORT        Status;
-
-    pInfo = (MLME_DEAUTH_REQ_STRUCT *)Elem->Msg;
-
-    NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-    if (NStatus != NDIS_STATUS_SUCCESS)
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("AUTH - MlmeDeauthReqAction() allocate memory fail\n"));
-        pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
-        Status = MLME_FAIL_NO_RESOURCE;
-        MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_DEAUTH_CONF, 2, &Status);
-        return;
-    }
-
-
-    DBGPRINT(RT_DEBUG_TRACE, ("AUTH - Send DE-AUTH request (Reason=%d)...\n", pInfo->Reason));
-    MgtMacHeaderInit(pAd, &DeauthHdr, SUBTYPE_DEAUTH, 0, pInfo->Addr, pAd->MlmeAux.Bssid);
-    MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-                      sizeof(HEADER_802_11),&DeauthHdr,
-                      2,                    &pInfo->Reason,
-                      END_OF_ARGS);
-    MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-    pAd->StaCfg.DeauthReason = pInfo->Reason;
-    COPY_MAC_ADDR(pAd->StaCfg.DeauthSta, pInfo->Addr);
-    pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
-    Status = MLME_SUCCESS;
-    MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_DEAUTH_CONF, 2, &Status);
-
-	// send wireless event - for deauthentication
-	if (pAd->CommonCfg.bWirelessEvent)
-		RTMPSendWirelessEvent(pAd, IW_DEAUTH_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID AuthTimeoutAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-    USHORT Status;
-    DBGPRINT(RT_DEBUG_TRACE, ("AUTH - AuthTimeoutAction\n"));
-    pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
-    Status = MLME_REJ_TIMEOUT;
-    MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_AUTH_CONF, 2, &Status);
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID InvalidStateWhenAuth(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-    USHORT Status;
-    DBGPRINT(RT_DEBUG_TRACE, ("AUTH - InvalidStateWhenAuth (state=%ld), reset AUTH state machine\n", pAd->Mlme.AuthMachine.CurrState));
-    pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
-    Status = MLME_STATE_MACHINE_REJECT;
-    MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_AUTH_CONF, 2, &Status);
-}
-
-/*
-    ==========================================================================
-    Description:
-        Some STA/AP
-    Note:
-        This action should never trigger AUTH state transition, therefore we
-        separate it from AUTH state machine, and make it as a standalone service
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID Cls2errAction(
-    IN PRTMP_ADAPTER pAd,
-    IN PUCHAR pAddr)
-{
-    HEADER_802_11 DeauthHdr;
-    PUCHAR        pOutBuffer = NULL;
-    NDIS_STATUS   NStatus;
-    ULONG         FrameLen = 0;
-    USHORT        Reason = REASON_CLS2ERR;
-
-    NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-    if (NStatus != NDIS_STATUS_SUCCESS)
-        return;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("AUTH - Class 2 error, Send DEAUTH frame...\n"));
-    MgtMacHeaderInit(pAd, &DeauthHdr, SUBTYPE_DEAUTH, 0, pAddr, pAd->MlmeAux.Bssid);
-    MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-                      sizeof(HEADER_802_11),&DeauthHdr,
-                      2,                    &Reason,
-                      END_OF_ARGS);
-    MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-    pAd->StaCfg.DeauthReason = Reason;
-    COPY_MAC_ADDR(pAd->StaCfg.DeauthSta, pAddr);
-}
-
-
+#include "../../rt2870/sta/auth.c"
diff --git a/drivers/staging/rt3070/sta/auth_rsp.c b/drivers/staging/rt3070/sta/auth_rsp.c
index f7aa4b99cf5..c4ea2dc49ad 100644
--- a/drivers/staging/rt3070/sta/auth_rsp.c
+++ b/drivers/staging/rt3070/sta/auth_rsp.c
@@ -1,167 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	auth_rsp.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	John		2004-10-1		copy from RT2560
-*/
-#include "../rt_config.h"
-
-/*
-    ==========================================================================
-    Description:
-        authentication state machine init procedure
-    Parameters:
-        Sm - the state machine
-
-	IRQL = PASSIVE_LEVEL
-
-    ==========================================================================
- */
-VOID AuthRspStateMachineInit(
-    IN PRTMP_ADAPTER pAd,
-    IN PSTATE_MACHINE Sm,
-    IN STATE_MACHINE_FUNC Trans[])
-{
-    StateMachineInit(Sm, Trans, MAX_AUTH_RSP_STATE, MAX_AUTH_RSP_MSG, (STATE_MACHINE_FUNC)Drop, AUTH_RSP_IDLE, AUTH_RSP_MACHINE_BASE);
-
-    // column 1
-    StateMachineSetAction(Sm, AUTH_RSP_IDLE, MT2_PEER_DEAUTH, (STATE_MACHINE_FUNC)PeerDeauthAction);
-
-    // column 2
-    StateMachineSetAction(Sm, AUTH_RSP_WAIT_CHAL, MT2_PEER_DEAUTH, (STATE_MACHINE_FUNC)PeerDeauthAction);
-
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
-*/
-VOID PeerAuthSimpleRspGenAndSend(
-    IN PRTMP_ADAPTER pAd,
-    IN PHEADER_802_11 pHdr80211,
-    IN USHORT Alg,
-    IN USHORT Seq,
-    IN USHORT Reason,
-    IN USHORT Status)
-{
-    HEADER_802_11     AuthHdr;
-    ULONG             FrameLen = 0;
-    PUCHAR            pOutBuffer = NULL;
-    NDIS_STATUS       NStatus;
-
-    if (Reason != MLME_SUCCESS)
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("Peer AUTH fail...\n"));
-        return;
-    }
-
-	//Get an unused nonpaged memory
-    NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);
-    if (NStatus != NDIS_STATUS_SUCCESS)
-        return;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Send AUTH response (seq#2)...\n"));
-    MgtMacHeaderInit(pAd, &AuthHdr, SUBTYPE_AUTH, 0, pHdr80211->Addr2, pAd->MlmeAux.Bssid);
-    MakeOutgoingFrame(pOutBuffer,               &FrameLen,
-                      sizeof(HEADER_802_11),    &AuthHdr,
-                      2,                        &Alg,
-                      2,                        &Seq,
-                      2,                        &Reason,
-                      END_OF_ARGS);
-    MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
-*/
-VOID PeerDeauthAction(
-    IN PRTMP_ADAPTER pAd,
-    IN PMLME_QUEUE_ELEM Elem)
-{
-    UCHAR       Addr2[MAC_ADDR_LEN];
-    USHORT      Reason;
-
-    if (PeerDeauthSanity(pAd, Elem->Msg, Elem->MsgLen, Addr2, &Reason))
-    {
-        if (INFRA_ON(pAd) && MAC_ADDR_EQUAL(Addr2, pAd->CommonCfg.Bssid))
-        {
-            DBGPRINT(RT_DEBUG_TRACE,("AUTH_RSP - receive DE-AUTH from our AP (Reason=%d)\n", Reason));
-
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-            {
-                union iwreq_data    wrqu;
-                memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN);
-                wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
-            }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-
-
-			// send wireless event - for deauthentication
-			if (pAd->CommonCfg.bWirelessEvent)
-				RTMPSendWirelessEvent(pAd, IW_DEAUTH_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-
-            LinkDown(pAd, TRUE);
-
-            // Authentication Mode Cisco_LEAP has start a timer
-            // We should cancel it if using LEAP
-#ifdef LEAP_SUPPORT
-            if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-            {
-                RTMPCancelTimer(&pAd->StaCfg.LeapAuthTimer, &TimerCancelled);
-                //Check is it mach the LEAP Authentication failed as possible a Rogue AP
-                //on it's PortSecured not equal to WPA_802_1X_PORT_SECURED while process the Authenticaton.
-                if ((pAd->StaCfg.PortSecured != WPA_802_1X_PORT_SECURED) && (pAd->Mlme.LeapMachine.CurrState != LEAP_IDLE))
-                {
-                    RogueApTableSetEntry(pAd, &pAd->StaCfg.RogueApTab, Addr2, LEAP_REASON_AUTH_TIMEOUT);
-                }
-            }
-#endif // LEAP_SUPPORT //
-        }
-    }
-    else
-    {
-        DBGPRINT(RT_DEBUG_TRACE,("AUTH_RSP - PeerDeauthAction() sanity check fail\n"));
-    }
-}
-
+#include "../../rt2870/sta/auth_rsp.c"
diff --git a/drivers/staging/rt3070/sta/connect.c b/drivers/staging/rt3070/sta/connect.c
index 152c0bd0f82..d77802caa30 100644
--- a/drivers/staging/rt3070/sta/connect.c
+++ b/drivers/staging/rt3070/sta/connect.c
@@ -1,2857 +1,2 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	connect.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	John			2004-08-08			Major modification from RT2560
-*/
-#include "../rt_config.h"
-
-UCHAR	CipherSuiteWpaNoneTkip[] = {
-		0x00, 0x50, 0xf2, 0x01,	// oui
-		0x01, 0x00,				// Version
-		0x00, 0x50, 0xf2, 0x02,	// Multicast
-		0x01, 0x00,				// Number of unicast
-		0x00, 0x50, 0xf2, 0x02,	// unicast
-		0x01, 0x00,				// number of authentication method
-		0x00, 0x50, 0xf2, 0x00	// authentication
-		};
-UCHAR	CipherSuiteWpaNoneTkipLen = (sizeof(CipherSuiteWpaNoneTkip) / sizeof(UCHAR));
-
-UCHAR	CipherSuiteWpaNoneAes[] = {
-		0x00, 0x50, 0xf2, 0x01,	// oui
-		0x01, 0x00,				// Version
-		0x00, 0x50, 0xf2, 0x04,	// Multicast
-		0x01, 0x00,				// Number of unicast
-		0x00, 0x50, 0xf2, 0x04,	// unicast
-		0x01, 0x00,				// number of authentication method
-		0x00, 0x50, 0xf2, 0x00	// authentication
-		};
-UCHAR	CipherSuiteWpaNoneAesLen = (sizeof(CipherSuiteWpaNoneAes) / sizeof(UCHAR));
-
-// The following MACRO is called after 1. starting an new IBSS, 2. succesfully JOIN an IBSS,
-// or 3. succesfully ASSOCIATE to a BSS, 4. successfully RE_ASSOCIATE to a BSS
-// All settings successfuly negotiated furing MLME state machines become final settings
-// and are copied to pAd->StaActive
-#define COPY_SETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(_pAd)                                 \
-{                                                                                       \
-	(_pAd)->CommonCfg.SsidLen = (_pAd)->MlmeAux.SsidLen;                                \
-	NdisMoveMemory((_pAd)->CommonCfg.Ssid, (_pAd)->MlmeAux.Ssid, (_pAd)->MlmeAux.SsidLen); \
-	COPY_MAC_ADDR((_pAd)->CommonCfg.Bssid, (_pAd)->MlmeAux.Bssid);                      \
-	(_pAd)->CommonCfg.Channel = (_pAd)->MlmeAux.Channel;                                \
-	(_pAd)->CommonCfg.CentralChannel = (_pAd)->MlmeAux.CentralChannel;                  \
-	(_pAd)->StaActive.Aid = (_pAd)->MlmeAux.Aid;                                        \
-	(_pAd)->StaActive.AtimWin = (_pAd)->MlmeAux.AtimWin;                                \
-	(_pAd)->StaActive.CapabilityInfo = (_pAd)->MlmeAux.CapabilityInfo;                  \
-	(_pAd)->CommonCfg.BeaconPeriod = (_pAd)->MlmeAux.BeaconPeriod;                      \
-	(_pAd)->StaActive.CfpMaxDuration = (_pAd)->MlmeAux.CfpMaxDuration;                  \
-	(_pAd)->StaActive.CfpPeriod = (_pAd)->MlmeAux.CfpPeriod;                            \
-	(_pAd)->StaActive.SupRateLen = (_pAd)->MlmeAux.SupRateLen;                          \
-	NdisMoveMemory((_pAd)->StaActive.SupRate, (_pAd)->MlmeAux.SupRate, (_pAd)->MlmeAux.SupRateLen);\
-	(_pAd)->StaActive.ExtRateLen = (_pAd)->MlmeAux.ExtRateLen;                          \
-	NdisMoveMemory((_pAd)->StaActive.ExtRate, (_pAd)->MlmeAux.ExtRate, (_pAd)->MlmeAux.ExtRateLen);\
-	NdisMoveMemory(&(_pAd)->CommonCfg.APEdcaParm, &(_pAd)->MlmeAux.APEdcaParm, sizeof(EDCA_PARM));\
-	NdisMoveMemory(&(_pAd)->CommonCfg.APQosCapability, &(_pAd)->MlmeAux.APQosCapability, sizeof(QOS_CAPABILITY_PARM));\
-	NdisMoveMemory(&(_pAd)->CommonCfg.APQbssLoad, &(_pAd)->MlmeAux.APQbssLoad, sizeof(QBSS_LOAD_PARM));\
-	COPY_MAC_ADDR((_pAd)->MacTab.Content[BSSID_WCID].Addr, (_pAd)->MlmeAux.Bssid);      \
-	(_pAd)->MacTab.Content[BSSID_WCID].Aid = (_pAd)->MlmeAux.Aid;                       \
-	(_pAd)->MacTab.Content[BSSID_WCID].PairwiseKey.CipherAlg = (_pAd)->StaCfg.PairCipher;\
-	COPY_MAC_ADDR((_pAd)->MacTab.Content[BSSID_WCID].PairwiseKey.BssId, (_pAd)->MlmeAux.Bssid);\
-	(_pAd)->MacTab.Content[BSSID_WCID].RateLen = (_pAd)->StaActive.SupRateLen + (_pAd)->StaActive.ExtRateLen;\
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = PASSIVE_LEVEL
-
-	==========================================================================
-*/
-VOID MlmeCntlInit(
-	IN PRTMP_ADAPTER pAd,
-	IN STATE_MACHINE *S,
-	OUT STATE_MACHINE_FUNC Trans[])
-{
-	// Control state machine differs from other state machines, the interface
-	// follows the standard interface
-	pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID MlmeCntlMachinePerformAction(
-	IN PRTMP_ADAPTER pAd,
-	IN STATE_MACHINE *S,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	switch(pAd->Mlme.CntlMachine.CurrState)
-	{
-		case CNTL_IDLE:
-			{
-				CntlIdleProc(pAd, Elem);
-			}
-			break;
-		case CNTL_WAIT_DISASSOC:
-			CntlWaitDisassocProc(pAd, Elem);
-			break;
-		case CNTL_WAIT_JOIN:
-			CntlWaitJoinProc(pAd, Elem);
-			break;
-
-		// CNTL_WAIT_REASSOC is the only state in CNTL machine that does
-		// not triggered directly or indirectly by "RTMPSetInformation(OID_xxx)".
-		// Therefore not protected by NDIS's "only one outstanding OID request"
-		// rule. Which means NDIS may SET OID in the middle of ROAMing attempts.
-		// Current approach is to block new SET request at RTMPSetInformation()
-		// when CntlMachine.CurrState is not CNTL_IDLE
-		case CNTL_WAIT_REASSOC:
-			CntlWaitReassocProc(pAd, Elem);
-			break;
-
-		case CNTL_WAIT_START:
-			CntlWaitStartProc(pAd, Elem);
-			break;
-		case CNTL_WAIT_AUTH:
-			CntlWaitAuthProc(pAd, Elem);
-			break;
-		case CNTL_WAIT_AUTH2:
-			CntlWaitAuthProc2(pAd, Elem);
-			break;
-		case CNTL_WAIT_ASSOC:
-			CntlWaitAssocProc(pAd, Elem);
-			break;
-
-		case CNTL_WAIT_OID_LIST_SCAN:
-			if(Elem->MsgType == MT2_SCAN_CONF)
-			{
-				// Resume TxRing after SCANING complete. We hope the out-of-service time
-				// won't be too long to let upper layer time-out the waiting frames
-				RTMPResumeMsduTransmission(pAd);
-				if (pAd->StaCfg.CCXReqType != MSRN_TYPE_UNUSED)
-				{
-					// Cisco scan request is finished, prepare beacon report
-					MlmeEnqueue(pAd, AIRONET_STATE_MACHINE, MT2_AIRONET_SCAN_DONE, 0, NULL);
-				}
-				pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-
-                //
-				// Set LED status to previous status.
-				//
-				if (pAd->bLedOnScanning)
-				{
-					pAd->bLedOnScanning = FALSE;
-					RTMPSetLED(pAd, pAd->LedStatus);
-				}
-#ifdef DOT11N_DRAFT3
-				// AP sent a 2040Coexistence mgmt frame, then station perform a scan, and then send back the respone.
-				if (pAd->CommonCfg.BSSCoexist2040.field.InfoReq == 1)
-				{
-					Update2040CoexistFrameAndNotify(pAd, BSSID_WCID, TRUE);
-				}
-#endif // DOT11N_DRAFT3 //
-			}
-			break;
-
-		case CNTL_WAIT_OID_DISASSOC:
-			if (Elem->MsgType == MT2_DISASSOC_CONF)
-			{
-				LinkDown(pAd, FALSE);
-				pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-			}
-			break;
-#ifdef RT2870
-		//
-		// This state is for that we want to connect to an AP but
-		// it didn't find on BSS List table. So we need to scan the air first,
-		// after that we can try to connect to the desired AP if available.
-		//
-		case CNTL_WAIT_SCAN_FOR_CONNECT:
-			if(Elem->MsgType == MT2_SCAN_CONF)
-			{
-				// Resume TxRing after SCANING complete. We hope the out-of-service time
-				// won't be too long to let upper layer time-out the waiting frames
-				RTMPResumeMsduTransmission(pAd);
-#ifdef CCX_SUPPORT
-				if (pAd->StaCfg.CCXReqType != MSRN_TYPE_UNUSED)
-				{
-					// Cisco scan request is finished, prepare beacon report
-					MlmeEnqueue(pAd, AIRONET_STATE_MACHINE, MT2_AIRONET_SCAN_DONE, 0, NULL);
-				}
-#endif // CCX_SUPPORT //
-				pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-
-				//
-				// Check if we can connect to.
-				//
-				BssTableSsidSort(pAd, &pAd->MlmeAux.SsidBssTab, pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
-				if (pAd->MlmeAux.SsidBssTab.BssNr > 0)
-				{
-					MlmeAutoReconnectLastSSID(pAd);
-				}
-			}
-			break;
-#endif // RT2870 //
-		default:
-			DBGPRINT_ERR(("!ERROR! CNTL - Illegal message type(=%ld)", Elem->MsgType));
-			break;
-	}
-}
-
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID CntlIdleProc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	MLME_DISASSOC_REQ_STRUCT   DisassocReq;
-
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))
-		return;
-
-	switch(Elem->MsgType)
-	{
-		case OID_802_11_SSID:
-			CntlOidSsidProc(pAd, Elem);
-			break;
-
-		case OID_802_11_BSSID:
-			CntlOidRTBssidProc(pAd,Elem);
-			break;
-
-		case OID_802_11_BSSID_LIST_SCAN:
-			CntlOidScanProc(pAd,Elem);
-			break;
-
-		case OID_802_11_DISASSOCIATE:
-#ifdef RALINK_ATE
-			if(ATE_ON(pAd))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				break;
-			}
-#endif // RALINK_ATE //
-			DisassocParmFill(pAd, &DisassocReq, pAd->CommonCfg.Bssid, REASON_DISASSOC_STA_LEAVING);
-			MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ, sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq);
-			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
-#ifdef WPA_SUPPLICANT_SUPPORT
-            if (pAd->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_ENABLE_WITH_WEB_UI)
-#endif // WPA_SUPPLICANT_SUPPORT //
-            {
-    			// Set the AutoReconnectSsid to prevent it reconnect to old SSID
-    			// Since calling this indicate user don't want to connect to that SSID anymore.
-    			pAd->MlmeAux.AutoReconnectSsidLen= 32;
-    			NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
-            }
-			break;
-
-		case MT2_MLME_ROAMING_REQ:
-			CntlMlmeRoamingProc(pAd, Elem);
-			break;
-
-        case OID_802_11_MIC_FAILURE_REPORT_FRAME:
-            WpaMicFailureReportFrame(pAd, Elem);
-            break;
-
-#ifdef QOS_DLS_SUPPORT
-		case RT_OID_802_11_SET_DLS_PARAM:
-			CntlOidDLSSetupProc(pAd, Elem);
-			break;
-#endif // QOS_DLS_SUPPORT //
-
-		default:
-			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Illegal message in CntlIdleProc(MsgType=%ld)\n",Elem->MsgType));
-			break;
-	}
-}
-
-VOID CntlOidScanProc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	MLME_SCAN_REQ_STRUCT       ScanReq;
-	ULONG                      BssIdx = BSS_NOT_FOUND;
-	BSS_ENTRY                  CurrBss;
-
-#ifdef RALINK_ATE
-/* Disable scanning when ATE is running. */
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-
-	// record current BSS if network is connected.
-	// 2003-2-13 do not include current IBSS if this is the only STA in this IBSS.
-	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
-	{
-		BssIdx = BssSsidTableSearch(&pAd->ScanTab, pAd->CommonCfg.Bssid, pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen, pAd->CommonCfg.Channel);
-		if (BssIdx != BSS_NOT_FOUND)
-		{
-			NdisMoveMemory(&CurrBss, &pAd->ScanTab.BssEntry[BssIdx], sizeof(BSS_ENTRY));
-		}
-	}
-
-	// clean up previous SCAN result, add current BSS back to table if any
-	BssTableInit(&pAd->ScanTab);
-	if (BssIdx != BSS_NOT_FOUND)
-	{
-		// DDK Note: If the NIC is associated with a particular BSSID and SSID
-		//    that are not contained in the list of BSSIDs generated by this scan, the
-		//    BSSID description of the currently associated BSSID and SSID should be
-		//    appended to the list of BSSIDs in the NIC's database.
-		// To ensure this, we append this BSS as the first entry in SCAN result
-		NdisMoveMemory(&pAd->ScanTab.BssEntry[0], &CurrBss, sizeof(BSS_ENTRY));
-		pAd->ScanTab.BssNr = 1;
-	}
-
-	ScanParmFill(pAd, &ScanReq, "", 0, BSS_ANY, SCAN_ACTIVE);
-	MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_SCAN_REQ,
-		sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq);
-	pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_LIST_SCAN;
-}
-
-/*
-	==========================================================================
-	Description:
-		Before calling this routine, user desired SSID should already been
-		recorded in CommonCfg.Ssid[]
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID CntlOidSsidProc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM * Elem)
-{
-	PNDIS_802_11_SSID          pOidSsid = (NDIS_802_11_SSID *)Elem->Msg;
-	MLME_DISASSOC_REQ_STRUCT   DisassocReq;
-	ULONG					   Now;
-
-	// Step 1. record the desired user settings to MlmeAux
-	NdisZeroMemory(pAd->MlmeAux.Ssid, MAX_LEN_OF_SSID);
-	NdisMoveMemory(pAd->MlmeAux.Ssid, pOidSsid->Ssid, pOidSsid->SsidLength);
-	pAd->MlmeAux.SsidLen = (UCHAR)pOidSsid->SsidLength;
-	NdisZeroMemory(pAd->MlmeAux.Bssid, MAC_ADDR_LEN);
-	pAd->MlmeAux.BssType = pAd->StaCfg.BssType;
-
-
-	//
-	// Update Reconnect Ssid, that user desired to connect.
-	//
-	NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, MAX_LEN_OF_SSID);
-	NdisMoveMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen);
-	pAd->MlmeAux.AutoReconnectSsidLen = pAd->MlmeAux.SsidLen;
-
-	// step 2. find all matching BSS in the lastest SCAN result (inBssTab)
-	//    & log them into MlmeAux.SsidBssTab for later-on iteration. Sort by RSSI order
-	BssTableSsidSort(pAd, &pAd->MlmeAux.SsidBssTab, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("CntlOidSsidProc():CNTL - %d BSS of %d BSS match the desire (%d)SSID - %s\n",
-			pAd->MlmeAux.SsidBssTab.BssNr, pAd->ScanTab.BssNr, pAd->MlmeAux.SsidLen, pAd->MlmeAux.Ssid));
-	NdisGetSystemUpTime(&Now);
-
-	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) &&
-		(pAd->CommonCfg.SsidLen == pAd->MlmeAux.SsidBssTab.BssEntry[0].SsidLen) &&
-		NdisEqualMemory(pAd->CommonCfg.Ssid, pAd->MlmeAux.SsidBssTab.BssEntry[0].Ssid, pAd->CommonCfg.SsidLen) &&
-		MAC_ADDR_EQUAL(pAd->CommonCfg.Bssid, pAd->MlmeAux.SsidBssTab.BssEntry[0].Bssid))
-	{
-		// Case 1. already connected with an AP who has the desired SSID
-		//         with highest RSSI
-
-		// Add checking Mode "LEAP" for CCX 1.0
-		if (((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) ||
-			 (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
-			 (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) ||
-			 (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)
-#ifdef LEAP_SUPPORT
-			 || (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-#endif // LEAP_SUPPORT //
-			 ) &&
-			(pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
-		{
-			// case 1.1 For WPA, WPA-PSK, if the 1x port is not secured, we have to redo
-			//          connection process
-			DBGPRINT(RT_DEBUG_TRACE, ("CntlOidSsidProc():CNTL - disassociate with current AP...\n"));
-			DisassocParmFill(pAd, &DisassocReq, pAd->CommonCfg.Bssid, REASON_DISASSOC_STA_LEAVING);
-			MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ,
-						sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq);
-			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_DISASSOC;
-		}
-		else if (pAd->bConfigChanged == TRUE)
-		{
-			// case 1.2 Important Config has changed, we have to reconnect to the same AP
-			DBGPRINT(RT_DEBUG_TRACE, ("CntlOidSsidProc():CNTL - disassociate with current AP Because config changed...\n"));
-			DisassocParmFill(pAd, &DisassocReq, pAd->CommonCfg.Bssid, REASON_DISASSOC_STA_LEAVING);
-			MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ,
-						sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq);
-			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_DISASSOC;
-		}
-		else
-		{
-			// case 1.3. already connected to the SSID with highest RSSI.
-			DBGPRINT(RT_DEBUG_TRACE, ("CntlOidSsidProc():CNTL - already with this BSSID. ignore this SET_SSID request\n"));
-			//
-			// (HCT 12.1) 1c_wlan_mediaevents required
-			// media connect events are indicated when associating with the same AP
-			//
-			if (INFRA_ON(pAd))
-			{
-				//
-				// Since MediaState already is NdisMediaStateConnected
-				// We just indicate the connect event again to meet the WHQL required.
-				//
-				pAd->IndicateMediaState = NdisMediaStateConnected;
-				RTMP_IndicateMediaState(pAd);
-                pAd->ExtraInfo = GENERAL_LINK_UP;   // Update extra information to link is up
-			}
-
-			pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-            {
-                union iwreq_data    wrqu;
-
-                memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN);
-                memcpy(wrqu.ap_addr.sa_data, pAd->MlmeAux.Bssid, MAC_ADDR_LEN);
-                wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
-
-            }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-		}
-	}
-	else if (INFRA_ON(pAd))
-	{
-		//
-		// For RT61
-		// [88888] OID_802_11_SSID should have returned NDTEST_WEP_AP2(Returned: )
-		// RT61 may lost SSID, and not connect to NDTEST_WEP_AP2 and will connect to NDTEST_WEP_AP2 by Autoreconnect
-		// But media status is connected, so the SSID not report correctly.
-		//
-		if (!SSID_EQUAL(pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen))
-		{
-			//
-			// Different SSID means not Roaming case, so we let LinkDown() to Indicate a disconnect event.
-			//
-			pAd->MlmeAux.CurrReqIsFromNdis = TRUE;
-		}
-		// case 2. active INFRA association existent
-		//    roaming is done within miniport driver, nothing to do with configuration
-		//    utility. so upon a new SET(OID_802_11_SSID) is received, we just
-		//    disassociate with the current associated AP,
-		//    then perform a new association with this new SSID, no matter the
-		//    new/old SSID are the same or not.
-		DBGPRINT(RT_DEBUG_TRACE, ("CntlOidSsidProc():CNTL - disassociate with current AP...\n"));
-		DisassocParmFill(pAd, &DisassocReq, pAd->CommonCfg.Bssid, REASON_DISASSOC_STA_LEAVING);
-		MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ,
-					sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq);
-		pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_DISASSOC;
-	}
-	else
-	{
-		if (ADHOC_ON(pAd))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("CntlOidSsidProc():CNTL - drop current ADHOC\n"));
-			LinkDown(pAd, FALSE);
-			OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
-			pAd->IndicateMediaState = NdisMediaStateDisconnected;
-			RTMP_IndicateMediaState(pAd);
-            pAd->ExtraInfo = GENERAL_LINK_DOWN;
-			DBGPRINT(RT_DEBUG_TRACE, ("CntlOidSsidProc():NDIS_STATUS_MEDIA_DISCONNECT Event C!\n"));
-		}
-
-		if ((pAd->MlmeAux.SsidBssTab.BssNr == 0) &&
-			(pAd->StaCfg.bAutoReconnect == TRUE) &&
-			(pAd->MlmeAux.BssType == BSS_INFRA) &&
-			(MlmeValidateSSID(pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen) == TRUE)
-			)
-		{
-			MLME_SCAN_REQ_STRUCT       ScanReq;
-
-			DBGPRINT(RT_DEBUG_TRACE, ("CntlOidSsidProc():CNTL - No matching BSS, start a new scan\n"));
-			ScanParmFill(pAd, &ScanReq, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen, BSS_ANY, SCAN_ACTIVE);
-			MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_SCAN_REQ, sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq);
-			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_LIST_SCAN;
-			// Reset Missed scan number
-			pAd->StaCfg.LastScanTime = Now;
-		}
-		else
-		{
-			pAd->MlmeAux.BssIdx = 0;
-			IterateOnBssTab(pAd);
-		}
-	}
-}
-
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID CntlOidRTBssidProc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM * Elem)
-{
-	ULONG       BssIdx;
-	PUCHAR      pOidBssid = (PUCHAR)Elem->Msg;
-	MLME_DISASSOC_REQ_STRUCT    DisassocReq;
-	MLME_JOIN_REQ_STRUCT        JoinReq;
-
-#ifdef RALINK_ATE
-/* No need to perform this routine when ATE is running. */
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-	// record user desired settings
-	COPY_MAC_ADDR(pAd->MlmeAux.Bssid, pOidBssid);
-	pAd->MlmeAux.BssType = pAd->StaCfg.BssType;
-
-	//
-	// Update Reconnect Ssid, that user desired to connect.
-	//
-	NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, MAX_LEN_OF_SSID);
-	pAd->MlmeAux.AutoReconnectSsidLen = pAd->MlmeAux.SsidLen;
-	NdisMoveMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen);
-
-	// find the desired BSS in the latest SCAN result table
-	BssIdx = BssTableSearch(&pAd->ScanTab, pOidBssid, pAd->MlmeAux.Channel);
-	if (BssIdx == BSS_NOT_FOUND)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("CNTL - BSSID not found. reply NDIS_STATUS_NOT_ACCEPTED\n"));
-		pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-		return;
-	}
-
-	// copy the matched BSS entry from ScanTab to MlmeAux.SsidBssTab. Why?
-	// Because we need this entry to become the JOIN target in later on SYNC state machine
-	pAd->MlmeAux.BssIdx = 0;
-	pAd->MlmeAux.SsidBssTab.BssNr = 1;
-	NdisMoveMemory(&pAd->MlmeAux.SsidBssTab.BssEntry[0], &pAd->ScanTab.BssEntry[BssIdx], sizeof(BSS_ENTRY));
-
-	//pAd->MlmeAux.AutoReconnectSsidLen = pAd->ScanTab.BssEntry[BssIdx].SsidLen;
-	//NdisMoveMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->ScanTab.BssEntry[BssIdx].Ssid, pAd->ScanTab.BssEntry[BssIdx].SsidLen);
-
-	// Add SSID into MlmeAux for site surey joining hidden SSID
-	//pAd->MlmeAux.SsidLen = pAd->ScanTab.BssEntry[BssIdx].SsidLen;
-	//NdisMoveMemory(pAd->MlmeAux.Ssid, pAd->ScanTab.BssEntry[BssIdx].Ssid, pAd->MlmeAux.SsidLen);
-
-	// 2002-11-26 skip the following checking. i.e. if user wants to re-connect to same AP
-	//   we just follow normal procedure. The reason of user doing this may because he/she changed
-	//   AP to another channel, but we still received BEACON from it thus don't claim Link Down.
-	//   Since user knows he's changed AP channel, he'll re-connect again. By skipping the following
-	//   checking, we'll disassociate then re-do normal association with this AP at the new channel.
-	// 2003-1-6 Re-enable this feature based on microsoft requirement which prefer not to re-do
-	//   connection when setting the same BSSID.
-	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) &&
-		MAC_ADDR_EQUAL(pAd->CommonCfg.Bssid, pOidBssid))
-	{
-		// already connected to the same BSSID, go back to idle state directly
-		DBGPRINT(RT_DEBUG_TRACE, ("CNTL - already in this BSSID. ignore this SET_BSSID request\n"));
-		pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-            {
-                union iwreq_data    wrqu;
-
-                memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN);
-                memcpy(wrqu.ap_addr.sa_data, pAd->MlmeAux.Bssid, MAC_ADDR_LEN);
-                wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
-
-            }
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-	}
-	else
-	{
-		if (INFRA_ON(pAd))
-		{
-			// disassoc from current AP first
-			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - disassociate with current AP ...\n"));
-			DisassocParmFill(pAd, &DisassocReq, pAd->CommonCfg.Bssid, REASON_DISASSOC_STA_LEAVING);
-			MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ,
-						sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq);
-
-			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_DISASSOC;
-		}
-		else
-		{
-			if (ADHOC_ON(pAd))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("CNTL - drop current ADHOC\n"));
-				LinkDown(pAd, FALSE);
-				OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
-				pAd->IndicateMediaState = NdisMediaStateDisconnected;
-				RTMP_IndicateMediaState(pAd);
-                pAd->ExtraInfo = GENERAL_LINK_DOWN;
-				DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event C!\n"));
-			}
-
-			// Change the wepstatus to original wepstatus
-			pAd->StaCfg.WepStatus   = pAd->StaCfg.OrigWepStatus;
-			pAd->StaCfg.PairCipher  = pAd->StaCfg.OrigWepStatus;
-			pAd->StaCfg.GroupCipher = pAd->StaCfg.OrigWepStatus;
-
-			// Check cipher suite, AP must have more secured cipher than station setting
-			// Set the Pairwise and Group cipher to match the intended AP setting
-			// We can only connect to AP with less secured cipher setting
-			if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK))
-			{
-				pAd->StaCfg.GroupCipher = pAd->ScanTab.BssEntry[BssIdx].WPA.GroupCipher;
-
-				if (pAd->StaCfg.WepStatus == pAd->ScanTab.BssEntry[BssIdx].WPA.PairCipher)
-					pAd->StaCfg.PairCipher = pAd->ScanTab.BssEntry[BssIdx].WPA.PairCipher;
-				else if (pAd->ScanTab.BssEntry[BssIdx].WPA.PairCipherAux != Ndis802_11WEPDisabled)
-					pAd->StaCfg.PairCipher = pAd->ScanTab.BssEntry[BssIdx].WPA.PairCipherAux;
-				else	// There is no PairCipher Aux, downgrade our capability to TKIP
-					pAd->StaCfg.PairCipher = Ndis802_11Encryption2Enabled;
-			}
-			else if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK))
-			{
-				pAd->StaCfg.GroupCipher = pAd->ScanTab.BssEntry[BssIdx].WPA2.GroupCipher;
-
-				if (pAd->StaCfg.WepStatus == pAd->ScanTab.BssEntry[BssIdx].WPA2.PairCipher)
-					pAd->StaCfg.PairCipher = pAd->ScanTab.BssEntry[BssIdx].WPA2.PairCipher;
-				else if (pAd->ScanTab.BssEntry[BssIdx].WPA2.PairCipherAux != Ndis802_11WEPDisabled)
-					pAd->StaCfg.PairCipher = pAd->ScanTab.BssEntry[BssIdx].WPA2.PairCipherAux;
-				else	// There is no PairCipher Aux, downgrade our capability to TKIP
-					pAd->StaCfg.PairCipher = Ndis802_11Encryption2Enabled;
-
-				// RSN capability
-				pAd->StaCfg.RsnCapability = pAd->ScanTab.BssEntry[BssIdx].WPA2.RsnCapability;
-			}
-
-			// Set Mix cipher flag
-			pAd->StaCfg.bMixCipher = (pAd->StaCfg.PairCipher == pAd->StaCfg.GroupCipher) ? FALSE : TRUE;
-			if (pAd->StaCfg.bMixCipher == TRUE)
-			{
-				// If mix cipher, re-build RSNIE
-				RTMPMakeRSNIE(pAd, pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus, 0);
-			}
-			// No active association, join the BSS immediately
-			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - joining %02x:%02x:%02x:%02x:%02x:%02x ...\n",
-				pOidBssid[0],pOidBssid[1],pOidBssid[2],pOidBssid[3],pOidBssid[4],pOidBssid[5]));
-
-			JoinParmFill(pAd, &JoinReq, pAd->MlmeAux.BssIdx);
-			MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_JOIN_REQ, sizeof(MLME_JOIN_REQ_STRUCT), &JoinReq);
-
-			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_JOIN;
-		}
-	}
-}
-
-// Roaming is the only external request triggering CNTL state machine
-// despite of other "SET OID" operation. All "SET OID" related oerations
-// happen in sequence, because no other SET OID will be sent to this device
-// until the the previous SET operation is complete (successful o failed).
-// So, how do we quarantee this ROAMING request won't corrupt other "SET OID"?
-// or been corrupted by other "SET OID"?
-//
-// IRQL = DISPATCH_LEVEL
-VOID CntlMlmeRoamingProc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	// TODO:
-	// AP in different channel may show lower RSSI than actual value??
-	// should we add a weighting factor to compensate it?
-	DBGPRINT(RT_DEBUG_TRACE,("CNTL - Roaming in MlmeAux.RoamTab...\n"));
-
-	NdisMoveMemory(&pAd->MlmeAux.SsidBssTab, &pAd->MlmeAux.RoamTab, sizeof(pAd->MlmeAux.RoamTab));
-	pAd->MlmeAux.SsidBssTab.BssNr = pAd->MlmeAux.RoamTab.BssNr;
-
-	BssTableSortByRssi(&pAd->MlmeAux.SsidBssTab);
-	pAd->MlmeAux.BssIdx = 0;
-	IterateOnBssTab(pAd);
-}
-
-#ifdef QOS_DLS_SUPPORT
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID CntlOidDLSSetupProc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	PRT_802_11_DLS		pDLS = (PRT_802_11_DLS)Elem->Msg;
-	MLME_DLS_REQ_STRUCT	MlmeDlsReq;
-	INT					i;
-	USHORT				reason = REASON_UNSPECIFY;
-
-	DBGPRINT(RT_DEBUG_TRACE,("CNTL - (OID set %02x:%02x:%02x:%02x:%02x:%02x with Valid=%d, Status=%d, TimeOut=%d, CountDownTimer=%d)\n",
-		pDLS->MacAddr[0], pDLS->MacAddr[1], pDLS->MacAddr[2], pDLS->MacAddr[3], pDLS->MacAddr[4], pDLS->MacAddr[5],
-		pDLS->Valid, pDLS->Status, pDLS->TimeOut, pDLS->CountDownTimer));
-
-	if (!pAd->CommonCfg.bDLSCapable)
-		return;
-
-	// DLS will not be supported when Adhoc mode
-	if (INFRA_ON(pAd))
-	{
-		for (i = 0; i < MAX_NUM_OF_DLS_ENTRY; i++)
-		{
-			if (pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH) &&
-				(pDLS->TimeOut == pAd->StaCfg.DLSEntry[i].TimeOut) && MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
-			{
-				// 1. Same setting, just drop it
-				DBGPRINT(RT_DEBUG_TRACE,("CNTL - setting unchanged\n"));
-				break;
-			}
-			else if (!pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH) &&
-				MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
-			{
-				// 2. Disable DLS link case, just tear down DLS link
-				reason = REASON_QOS_UNWANTED_MECHANISM;
-				pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-				pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-				DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-				MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-				DBGPRINT(RT_DEBUG_TRACE,("CNTL - start tear down procedure\n"));
-				break;
-			}
-			else if ((i < MAX_NUM_OF_DLS_ENTRY) && pDLS->Valid && !pAd->StaCfg.DLSEntry[i].Valid)
-			{
-				// 3. Enable case, start DLS setup procedure
-				NdisMoveMemory(&pAd->StaCfg.DLSEntry[i], pDLS, sizeof(RT_802_11_DLS_UI));
-
-				//Update countdown timer
-				pAd->StaCfg.DLSEntry[i].CountDownTimer = pAd->StaCfg.DLSEntry[i].TimeOut;
-				DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-				MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_REQ, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-				DBGPRINT(RT_DEBUG_TRACE,("CNTL - DLS setup case\n"));
-				break;
-			}
-			else if ((i < MAX_NUM_OF_DLS_ENTRY) && pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid &&
-				(pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH) && !MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
-			{
-				// 4. update mac case, tear down old DLS and setup new DLS
-				reason = REASON_QOS_UNWANTED_MECHANISM;
-				pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-				pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-				DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-				MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-				NdisMoveMemory(&pAd->StaCfg.DLSEntry[i], pDLS, sizeof(RT_802_11_DLS_UI));
-				DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-				MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_REQ, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-				DBGPRINT(RT_DEBUG_TRACE,("CNTL - DLS tear down and restart case\n"));
-				break;
-			}
-			else if (pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid &&
-				MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr) && (pAd->StaCfg.DLSEntry[i].TimeOut != pDLS->TimeOut))
-			{
-				// 5. update timeout case, start DLS setup procedure (no tear down)
-				pAd->StaCfg.DLSEntry[i].TimeOut	= pDLS->TimeOut;
-				//Update countdown timer
-				pAd->StaCfg.DLSEntry[i].CountDownTimer = pAd->StaCfg.DLSEntry[i].TimeOut;
-				DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-				MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_REQ, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-				DBGPRINT(RT_DEBUG_TRACE,("CNTL - DLS update timeout case\n"));
-				break;
-			}
-			else if (pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid &&
-				(pAd->StaCfg.DLSEntry[i].Status != DLS_FINISH) && MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
-			{
-				// 6. re-setup case, start DLS setup procedure (no tear down)
-				DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-				MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_REQ, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-				DBGPRINT(RT_DEBUG_TRACE,("CNTL - DLS retry setup procedure\n"));
-				break;
-			}
-			else
-			{
-				DBGPRINT(RT_DEBUG_WARN,("CNTL - DLS not changed in entry - %d - Valid=%d, Status=%d, TimeOut=%d\n",
-					i, pAd->StaCfg.DLSEntry[i].Valid, pAd->StaCfg.DLSEntry[i].Status, pAd->StaCfg.DLSEntry[i].TimeOut));
-			}
-		}
-	}
-}
-#endif // QOS_DLS_SUPPORT //
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID CntlWaitDisassocProc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	MLME_START_REQ_STRUCT     StartReq;
-
-	if (Elem->MsgType == MT2_DISASSOC_CONF)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Dis-associate successful\n"));
-
-	    if (pAd->CommonCfg.bWirelessEvent)
-		{
-			RTMPSendWirelessEvent(pAd, IW_DISASSOC_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-		}
-
-		LinkDown(pAd, FALSE);
-
-		// case 1. no matching BSS, and user wants ADHOC, so we just start a new one
-		if ((pAd->MlmeAux.SsidBssTab.BssNr==0) && (pAd->StaCfg.BssType == BSS_ADHOC))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - No matching BSS, start a new ADHOC (Ssid=%s)...\n",pAd->MlmeAux.Ssid));
-			StartParmFill(pAd, &StartReq, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen);
-			MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_START_REQ, sizeof(MLME_START_REQ_STRUCT), &StartReq);
-			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_START;
-		}
-		// case 2. try each matched BSS
-		else
-		{
-			pAd->MlmeAux.BssIdx = 0;
-
-			IterateOnBssTab(pAd);
-		}
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID CntlWaitJoinProc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT                      Reason;
-	MLME_AUTH_REQ_STRUCT        AuthReq;
-
-	if (Elem->MsgType == MT2_JOIN_CONF)
-	{
-		NdisMoveMemory(&Reason, Elem->Msg, sizeof(USHORT));
-		if (Reason == MLME_SUCCESS)
-		{
-			// 1. joined an IBSS, we are pretty much done here
-			if (pAd->MlmeAux.BssType == BSS_ADHOC)
-			{
-			    //
-				// 5G bands rules of Japan:
-				// Ad hoc must be disabled in W53(ch52,56,60,64) channels.
-				//
-				if ( (pAd->CommonCfg.bIEEE80211H == 1) &&
-                      RadarChannelCheck(pAd, pAd->CommonCfg.Channel)
-				   )
-				{
-					pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-					DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Channel=%d, Join adhoc on W53(52,56,60,64) Channels are not accepted\n", pAd->CommonCfg.Channel));
-					return;
-				}
-
-				LinkUp(pAd, BSS_ADHOC);
-				pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-				DBGPRINT(RT_DEBUG_TRACE, ("CNTL - join the IBSS = %02x:%02x:%02x:%02x:%02x:%02x ...\n",
-				pAd->CommonCfg.Bssid[0],pAd->CommonCfg.Bssid[1],pAd->CommonCfg.Bssid[2],
-				pAd->CommonCfg.Bssid[3],pAd->CommonCfg.Bssid[4],pAd->CommonCfg.Bssid[5]));
-
-                pAd->IndicateMediaState = NdisMediaStateConnected;
-                pAd->ExtraInfo = GENERAL_LINK_UP;
-			}
-			// 2. joined a new INFRA network, start from authentication
-			else
-			{
-#ifdef LEAP_SUPPORT
-				// Add AuthMode "LEAP" for CCX 1.X
-				if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-				{
-					AuthParmFill(pAd, &AuthReq, pAd->MlmeAux.Bssid, CISCO_AuthModeLEAP);
-				}
-				else
-#endif // LEAP_SUPPORT //
-				{
-					// either Ndis802_11AuthModeShared or Ndis802_11AuthModeAutoSwitch, try shared key first
-					if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeShared) ||
-						(pAd->StaCfg.AuthMode == Ndis802_11AuthModeAutoSwitch))
-					{
-						AuthParmFill(pAd, &AuthReq, pAd->MlmeAux.Bssid, Ndis802_11AuthModeShared);
-					}
-					else
-					{
-						AuthParmFill(pAd, &AuthReq, pAd->MlmeAux.Bssid, Ndis802_11AuthModeOpen);
-					}
-				}
-				MlmeEnqueue(pAd, AUTH_STATE_MACHINE, MT2_MLME_AUTH_REQ,
-							sizeof(MLME_AUTH_REQ_STRUCT), &AuthReq);
-
-				pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_AUTH;
-			}
-		}
-		else
-		{
-			// 3. failed, try next BSS
-			pAd->MlmeAux.BssIdx++;
-			IterateOnBssTab(pAd);
-		}
-	}
-}
-
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID CntlWaitStartProc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT      Result;
-
-	if (Elem->MsgType == MT2_START_CONF)
-	{
-		NdisMoveMemory(&Result, Elem->Msg, sizeof(USHORT));
-		if (Result == MLME_SUCCESS)
-		{
-		    //
-			// 5G bands rules of Japan:
-			// Ad hoc must be disabled in W53(ch52,56,60,64) channels.
-			//
-			if ( (pAd->CommonCfg.bIEEE80211H == 1) &&
-                  RadarChannelCheck(pAd, pAd->CommonCfg.Channel)
-			   )
-			{
-				pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-				DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Channel=%d, Start adhoc on W53(52,56,60,64) Channels are not accepted\n", pAd->CommonCfg.Channel));
-				return;
-			}
-#ifdef DOT11_N_SUPPORT
-			if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
-			{
-				N_ChannelCheck(pAd);
-				SetCommonHT(pAd);
-				NdisMoveMemory(&pAd->MlmeAux.AddHtInfo, &pAd->CommonCfg.AddHTInfo, sizeof(ADD_HT_INFO_IE));
-				RTMPCheckHt(pAd, BSSID_WCID, &pAd->CommonCfg.HtCapability, &pAd->CommonCfg.AddHTInfo);
-				pAd->StaActive.SupportedPhyInfo.bHtEnable = TRUE;
-				NdisZeroMemory(&pAd->StaActive.SupportedPhyInfo.MCSSet[0], 16);
-				NdisMoveMemory(&pAd->StaActive.SupportedPhyInfo.MCSSet[0], &pAd->CommonCfg.HtCapability.MCSSet[0], 16);
-				COPY_HTSETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(pAd);
-
-				if ((pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth  == BW_40) &&
-					(pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset == EXTCHA_ABOVE))
-				{
-					pAd->MlmeAux.CentralChannel = pAd->CommonCfg.Channel + 2;
-				}
-				else if ((pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth  == BW_40) &&
-						 (pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset == EXTCHA_BELOW))
-				{
-					pAd->MlmeAux.CentralChannel = pAd->CommonCfg.Channel - 2;
-				}
-			}
-			else
-#endif // DOT11_N_SUPPORT //
-			{
-				pAd->StaActive.SupportedPhyInfo.bHtEnable = FALSE;
-			}
-			LinkUp(pAd, BSS_ADHOC);
-			pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-			// Before send beacon, driver need do radar detection
-			if ((pAd->CommonCfg.Channel > 14 )
-				&& (pAd->CommonCfg.bIEEE80211H == 1)
-				&& RadarChannelCheck(pAd, pAd->CommonCfg.Channel))
-			{
-				pAd->CommonCfg.RadarDetect.RDMode = RD_SILENCE_MODE;
-				pAd->CommonCfg.RadarDetect.RDCount = 0;
-#ifdef DFS_SUPPORT
-				BbpRadarDetectionStart(pAd);
-#endif // DFS_SUPPORT //
-			}
-
-			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - start a new IBSS = %02x:%02x:%02x:%02x:%02x:%02x ...\n",
-				pAd->CommonCfg.Bssid[0],pAd->CommonCfg.Bssid[1],pAd->CommonCfg.Bssid[2],
-				pAd->CommonCfg.Bssid[3],pAd->CommonCfg.Bssid[4],pAd->CommonCfg.Bssid[5]));
-		}
-		else
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Start IBSS fail. BUG!!!!!\n"));
-			pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-		}
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID CntlWaitAuthProc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT                       Reason;
-	MLME_ASSOC_REQ_STRUCT        AssocReq;
-	MLME_AUTH_REQ_STRUCT         AuthReq;
-
-	if (Elem->MsgType == MT2_AUTH_CONF)
-	{
-		NdisMoveMemory(&Reason, Elem->Msg, sizeof(USHORT));
-		if (Reason == MLME_SUCCESS)
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - AUTH OK\n"));
-			AssocParmFill(pAd, &AssocReq, pAd->MlmeAux.Bssid, pAd->MlmeAux.CapabilityInfo,
-						  ASSOC_TIMEOUT, pAd->StaCfg.DefaultListenCount);
-
-#ifdef LEAP_SUPPORT
-			//
-			// Cisco Leap CCKM supported Re-association.
-			//
-			if (LEAP_CCKM_ON(pAd) && (pAd->StaCfg.CCKMLinkUpFlag == TRUE))
-			{
-				//if CCKM is turn on , that's mean Fast Reauthentication
-				//Use CCKM Reassociation instead of normal association for Fast Roaming.
-				MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_REASSOC_REQ,
-							sizeof(MLME_ASSOC_REQ_STRUCT), &AssocReq);
-
-				pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_REASSOC;
-			}
-			else
-#endif // LEAP_SUPPORT //
-			{
-				MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_ASSOC_REQ,
-							sizeof(MLME_ASSOC_REQ_STRUCT), &AssocReq);
-
-				pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_ASSOC;
-			}
-		}
-		else
-		{
-			// This fail may because of the AP already keep us in its MAC table without
-			// ageing-out. The previous authentication attempt must have let it remove us.
-			// so try Authentication again may help. For D-Link DWL-900AP+ compatibility.
-			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - AUTH FAIL, try again...\n"));
-#ifdef LEAP_SUPPORT
-			//Add AuthMode "LEAP" for CCX 1.X
-			if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-			{
-				AuthParmFill(pAd, &AuthReq, pAd->MlmeAux.Bssid, CISCO_AuthModeLEAP);
-			}
-			else
-#endif // LEAP_SUPPORT //
-			{
-				if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeShared) ||
-					(pAd->StaCfg.AuthMode == Ndis802_11AuthModeAutoSwitch))
-				{
-					// either Ndis802_11AuthModeShared or Ndis802_11AuthModeAutoSwitch, try shared key first
-					AuthParmFill(pAd, &AuthReq, pAd->MlmeAux.Bssid, Ndis802_11AuthModeShared);
-				}
-				else
-				{
-					AuthParmFill(pAd, &AuthReq, pAd->MlmeAux.Bssid, Ndis802_11AuthModeOpen);
-				}
-			}
-			MlmeEnqueue(pAd, AUTH_STATE_MACHINE, MT2_MLME_AUTH_REQ,
-						sizeof(MLME_AUTH_REQ_STRUCT), &AuthReq);
-
-			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_AUTH2;
-		}
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID CntlWaitAuthProc2(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT                       Reason;
-	MLME_ASSOC_REQ_STRUCT        AssocReq;
-	MLME_AUTH_REQ_STRUCT         AuthReq;
-
-	if (Elem->MsgType == MT2_AUTH_CONF)
-	{
-		NdisMoveMemory(&Reason, Elem->Msg, sizeof(USHORT));
-		if (Reason == MLME_SUCCESS)
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - AUTH OK\n"));
-			AssocParmFill(pAd, &AssocReq, pAd->MlmeAux.Bssid, pAd->MlmeAux.CapabilityInfo,
-						  ASSOC_TIMEOUT, pAd->StaCfg.DefaultListenCount);
-			MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_ASSOC_REQ,
-						sizeof(MLME_ASSOC_REQ_STRUCT), &AssocReq);
-
-			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_ASSOC;
-		}
-		else
-		{
-#ifdef LEAP_SUPPORT
-			// Process LEAP first, since it use different control variable
-			// We don't want to affect other poven operation
-			if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-			{
-				// LEAP Auth not success, try next BSS
-				DBGPRINT(RT_DEBUG_TRACE, ("CNTL - *LEAP* AUTH FAIL, give up; try next BSS\n"));
-				DBGPRINT(RT_DEBUG_TRACE, ("Total match BSSID [=%d]\n", pAd->MlmeAux.SsidBssTab.BssNr));
-				pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-				pAd->MlmeAux.BssIdx++;
-				IterateOnBssTab(pAd);
-			}
-			else
-#endif // LEAP_SUPPORT //
-			if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeAutoSwitch) &&
-				 (pAd->MlmeAux.Alg == Ndis802_11AuthModeShared))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("CNTL - AUTH FAIL, try OPEN system...\n"));
-				AuthParmFill(pAd, &AuthReq, pAd->MlmeAux.Bssid, Ndis802_11AuthModeOpen);
-				MlmeEnqueue(pAd, AUTH_STATE_MACHINE, MT2_MLME_AUTH_REQ,
-							sizeof(MLME_AUTH_REQ_STRUCT), &AuthReq);
-
-				pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_AUTH2;
-			}
-			else
-			{
-				// not success, try next BSS
-				DBGPRINT(RT_DEBUG_TRACE, ("CNTL - AUTH FAIL, give up; try next BSS\n"));
-				pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; //???????
-				pAd->MlmeAux.BssIdx++;
-				IterateOnBssTab(pAd);
-			}
-		}
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID CntlWaitAssocProc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT      Reason;
-
-	if (Elem->MsgType == MT2_ASSOC_CONF)
-	{
-		NdisMoveMemory(&Reason, Elem->Msg, sizeof(USHORT));
-		if (Reason == MLME_SUCCESS)
-		{
-			LinkUp(pAd, BSS_INFRA);
-			pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Association successful on BSS #%ld\n",pAd->MlmeAux.BssIdx));
-
-			if (pAd->CommonCfg.bWirelessEvent)
-			{
-				RTMPSendWirelessEvent(pAd, IW_ASSOC_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-			}
-		}
-		else
-		{
-			// not success, try next BSS
-			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Association fails on BSS #%ld\n",pAd->MlmeAux.BssIdx));
-			pAd->MlmeAux.BssIdx++;
-			IterateOnBssTab(pAd);
-		}
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID CntlWaitReassocProc(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT      Result;
-
-	if (Elem->MsgType == MT2_REASSOC_CONF)
-	{
-		NdisMoveMemory(&Result, Elem->Msg, sizeof(USHORT));
-		if (Result == MLME_SUCCESS)
-		{
-			//
-			// NDIS requires a new Link UP indication but no Link Down for RE-ASSOC
-			//
-			LinkUp(pAd, BSS_INFRA);
-
-			// send wireless event - for association
-			if (pAd->CommonCfg.bWirelessEvent)
-				RTMPSendWirelessEvent(pAd, IW_ASSOC_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-
-
-#ifdef LEAP_SUPPORT
-			if (LEAP_CCKM_ON(pAd))
-			{
-				STA_PORT_SECURED(pAd);
-				pAd->StaCfg.WpaState = SS_FINISH;
-			}
-#endif // LEAP_SUPPORT //
-			pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Re-assocition successful on BSS #%ld\n", pAd->MlmeAux.RoamIdx));
-		}
-		else
-		{
-			// reassoc failed, try to pick next BSS in the BSS Table
-			DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Re-assocition fails on BSS #%ld\n", pAd->MlmeAux.RoamIdx));
-			pAd->MlmeAux.RoamIdx++;
-			IterateOnBssTab2(pAd);
-		}
-	}
-}
-
-
-VOID	AdhocTurnOnQos(
-	IN  PRTMP_ADAPTER pAd)
-{
-#define AC0_DEF_TXOP		0
-#define AC1_DEF_TXOP		0
-#define AC2_DEF_TXOP		94
-#define AC3_DEF_TXOP		47
-
-	// Turn on QOs if use HT rate.
-	if (pAd->CommonCfg.APEdcaParm.bValid == FALSE)
-	{
-		pAd->CommonCfg.APEdcaParm.bValid = TRUE;
-		pAd->CommonCfg.APEdcaParm.Aifsn[0] = 3;
-		pAd->CommonCfg.APEdcaParm.Aifsn[1] = 7;
-		pAd->CommonCfg.APEdcaParm.Aifsn[2] = 1;
-		pAd->CommonCfg.APEdcaParm.Aifsn[3] = 1;
-
-		pAd->CommonCfg.APEdcaParm.Cwmin[0] = 4;
-		pAd->CommonCfg.APEdcaParm.Cwmin[1] = 4;
-		pAd->CommonCfg.APEdcaParm.Cwmin[2] = 3;
-		pAd->CommonCfg.APEdcaParm.Cwmin[3] = 2;
-
-		pAd->CommonCfg.APEdcaParm.Cwmax[0] = 10;
-		pAd->CommonCfg.APEdcaParm.Cwmax[1] = 6;
-		pAd->CommonCfg.APEdcaParm.Cwmax[2] = 4;
-		pAd->CommonCfg.APEdcaParm.Cwmax[3] = 3;
-
-		pAd->CommonCfg.APEdcaParm.Txop[0]  = 0;
-		pAd->CommonCfg.APEdcaParm.Txop[1]  = 0;
-		pAd->CommonCfg.APEdcaParm.Txop[2]  = AC2_DEF_TXOP;
-		pAd->CommonCfg.APEdcaParm.Txop[3]  = AC3_DEF_TXOP;
-	}
-	AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm);
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID LinkUp(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR BssType)
-{
-	ULONG	Now;
-	UINT32	Data;
-	BOOLEAN	Cancelled;
-	UCHAR	Value = 0, idx;
-	MAC_TABLE_ENTRY *pEntry = NULL, *pCurrEntry;
-
-	pEntry = &pAd->MacTab.Content[BSSID_WCID];
-
-	//
-	// ASSOC - DisassocTimeoutAction
-	// CNTL - Dis-associate successful
-	// !!! LINK DOWN !!!
-	// [88888] OID_802_11_SSID should have returned NDTEST_WEP_AP2(Returned: )
-	//
-	// To prevent DisassocTimeoutAction to call Link down after we link up,
-	// cancel the DisassocTimer no matter what it start or not.
-	//
-	RTMPCancelTimer(&pAd->MlmeAux.DisassocTimer,  &Cancelled);
-
-	COPY_SETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(pAd);
-
-#ifdef DOT11_N_SUPPORT
-	COPY_HTSETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(pAd);
-#endif // DOT11_N_SUPPORT //
-	// It's quite difficult to tell if a newly added KEY is WEP or CKIP until a new BSS
-	// is formed (either ASSOC/RE-ASSOC done or IBSS started. LinkUP should be a safe place
-	// to examine if cipher algorithm switching is required.
-	//rt2860b. Don't know why need this
-	SwitchBetweenWepAndCkip(pAd);
-
-
-	if (BssType == BSS_ADHOC)
-	{
-		OPSTATUS_SET_FLAG(pAd, fOP_STATUS_ADHOC_ON);
-		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_INFRA_ON);
-
-#ifdef DOT11_N_SUPPORT
-		if ((pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth  == BW_40) &&
-			(pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset == EXTCHA_ABOVE))
-		{
-			pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel + 2;
-		}
-		else if ((pAd->CommonCfg.Channel > 2) &&
-				 (pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth  == BW_40) &&
-				 (pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset == EXTCHA_BELOW))
-		{
-			pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel - 2;
-		}
-#endif // DOT11_N_SUPPORT //
-
-#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier
-		// No carrier detection when adhoc
-		// CarrierDetectionStop(pAd);
-		pAd->CommonCfg.CarrierDetect.CD_State = CD_NORMAL;
-#endif // CARRIER_DETECTION_SUPPORT //
-
-#ifdef DOT11_N_SUPPORT
-		if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
-			AdhocTurnOnQos(pAd);
-#endif // DOT11_N_SUPPORT //
-
-		DBGPRINT(RT_DEBUG_TRACE, ("!!!Adhoc LINK UP !!! \n" ));
-	}
-	else
-	{
-		OPSTATUS_SET_FLAG(pAd, fOP_STATUS_INFRA_ON);
-		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_ADHOC_ON);
-
-		DBGPRINT(RT_DEBUG_TRACE, ("!!!Infra LINK UP !!! \n" ));
-	}
-
-	// 3*3
-	// reset Tx beamforming bit
-	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &Value);
-	Value &= (~0x01);
-	Value |= pAd->CommonCfg.RegTransmitSetting.field.TxBF;
-	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value);
-
-#ifdef DOT11_N_SUPPORT
-	// Change to AP channel
-    if ((pAd->CommonCfg.CentralChannel > pAd->CommonCfg.Channel) && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40))
-	{
-		// Must using 40MHz.
-		pAd->CommonCfg.BBPCurrentBW = BW_40;
-		AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
-		AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
-
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &Value);
-		Value &= (~0x18);
-		Value |= 0x10;
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value);
-
-		//  RX : control channel at lower
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
-		Value &= (~0x20);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
-
-		RTMP_IO_READ32(pAd, TX_BAND_CFG, &Data);
-		Data &= 0xfffffffe;
-		RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Data);
-
-		if (pAd->MACVersion == 0x28600100)
-		{
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x1A);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x0A);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x16);
-            DBGPRINT(RT_DEBUG_TRACE, ("!!!rt2860C !!! \n" ));
-		}
-
-		DBGPRINT(RT_DEBUG_TRACE, ("!!!40MHz Lower LINK UP !!! Control Channel at Below. Central = %d \n", pAd->CommonCfg.CentralChannel ));
-	}
-	else if ((pAd->CommonCfg.CentralChannel < pAd->CommonCfg.Channel) && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40))
-    {
-	    // Must using 40MHz.
-		pAd->CommonCfg.BBPCurrentBW = BW_40;
-		AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
-	    AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
-
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &Value);
-		Value &= (~0x18);
-		Value |= 0x10;
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value);
-
-		RTMP_IO_READ32(pAd, TX_BAND_CFG, &Data);
-		Data |= 0x1;
-		RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Data);
-
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
-	    Value |= (0x20);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
-
-		if (pAd->MACVersion == 0x28600100)
-		{
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x1A);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x0A);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x16);
-			    DBGPRINT(RT_DEBUG_TRACE, ("!!!rt2860C !!! \n" ));
-		}
-
-	    DBGPRINT(RT_DEBUG_TRACE, ("!!! 40MHz Upper LINK UP !!! Control Channel at UpperCentral = %d \n", pAd->CommonCfg.CentralChannel ));
-    }
-    else
-#endif // DOT11_N_SUPPORT //
-    {
-	    pAd->CommonCfg.BBPCurrentBW = BW_20;
-		pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel;
-		AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
-		AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &Value);
-		Value &= (~0x18);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value);
-
-		RTMP_IO_READ32(pAd, TX_BAND_CFG, &Data);
-		Data &= 0xfffffffe;
-		RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Data);
-
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
-		Value &= (~0x20);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
-
-		if (pAd->MACVersion == 0x28600100)
-		{
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x16);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x08);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x11);
-            DBGPRINT(RT_DEBUG_TRACE, ("!!!rt2860C !!! \n" ));
-		}
-
-	    DBGPRINT(RT_DEBUG_TRACE, ("!!! 20MHz LINK UP !!! \n" ));
-    }
-
-	RTMPSetAGCInitValue(pAd, pAd->CommonCfg.BBPCurrentBW);
-	//
-	// Save BBP_R66 value, it will be used in RTUSBResumeMsduTransmission
-	//
-	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66, &pAd->BbpTuning.R66CurrentValue);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK UP !!! (BssType=%d, AID=%d, ssid=%s, Channel=%d, CentralChannel = %d)\n",
-		BssType, pAd->StaActive.Aid, pAd->CommonCfg.Ssid, pAd->CommonCfg.Channel, pAd->CommonCfg.CentralChannel));
-
-#ifdef DOT11_N_SUPPORT
-	DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK UP !!! (Density =%d, )\n", pAd->MacTab.Content[BSSID_WCID].MpduDensity));
-#endif // DOT11_N_SUPPORT //
-
-		AsicSetBssid(pAd, pAd->CommonCfg.Bssid);
-
-	AsicSetSlotTime(pAd, TRUE);
-	AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm);
-
-	// Call this for RTS protectionfor legacy rate, we will always enable RTS threshold, but normally it will not hit
-	AsicUpdateProtect(pAd, 0, (OFDMSETPROTECT | CCKSETPROTECT), TRUE, FALSE);
-
-#ifdef DOT11_N_SUPPORT
-	if ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE))
-	{
-		// Update HT protectionfor based on AP's operating mode.
-    	if (pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent == 1)
-    	{
-    		AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode,  ALLN_SETPROTECT, FALSE, TRUE);
-    	}
-    	else
-   			AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode,  ALLN_SETPROTECT, FALSE, FALSE);
-	}
-#endif // DOT11_N_SUPPORT //
-
-	NdisZeroMemory(&pAd->DrsCounters, sizeof(COUNTER_DRS));
-
-	NdisGetSystemUpTime(&Now);
-	pAd->StaCfg.LastBeaconRxTime = Now;   // last RX timestamp
-
-	if ((pAd->CommonCfg.TxPreamble != Rt802_11PreambleLong) &&
-		CAP_IS_SHORT_PREAMBLE_ON(pAd->StaActive.CapabilityInfo))
-	{
-		MlmeSetTxPreamble(pAd, Rt802_11PreambleShort);
-	}
-
-	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED);
-
-	if (pAd->CommonCfg.RadarDetect.RDMode == RD_SILENCE_MODE)
-	{
-#ifdef DFS_SUPPORT
-		RadarDetectionStop(pAd);
-#endif // DFS_SUPPORT //
-	}
-	pAd->CommonCfg.RadarDetect.RDMode = RD_NORMAL_MODE;
-
-	if (BssType == BSS_ADHOC)
-	{
-		MakeIbssBeacon(pAd);
-		if ((pAd->CommonCfg.Channel > 14)
-			&& (pAd->CommonCfg.bIEEE80211H == 1)
-			&& RadarChannelCheck(pAd, pAd->CommonCfg.Channel))
-		{
-			; //Do nothing
-		}
-		else
-		{
-			AsicEnableIbssSync(pAd);
-		}
-
-		// In ad hoc mode, use MAC table from index 1.
-		// p.s ASIC use all 0xff as termination of WCID table search.To prevent it's 0xff-ff-ff-ff-ff-ff, Write 0 here.
-		RTMP_IO_WRITE32(pAd, MAC_WCID_BASE, 0x00);
-		RTMP_IO_WRITE32(pAd, 0x1808, 0x00);
-
-		// If WEP is enabled, add key material and cipherAlg into Asic
-		// Fill in Shared Key Table(offset: 0x6c00) and Shared Key Mode(offset: 0x7000)
-
-		if (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled)
-		{
-			PUCHAR	Key;
-			UCHAR 	CipherAlg;
-
-			for (idx=0; idx < SHARE_KEY_NUM; idx++)
-        	{
-				CipherAlg = pAd->SharedKey[BSS0][idx].CipherAlg;
-    			Key = pAd->SharedKey[BSS0][idx].Key;
-
-				if (pAd->SharedKey[BSS0][idx].KeyLen > 0)
-				{
-					// Set key material and cipherAlg to Asic
-    				AsicAddSharedKeyEntry(pAd, BSS0, idx, CipherAlg, Key, NULL, NULL);
-
-                    if (idx == pAd->StaCfg.DefaultKeyId)
-					{
-						// Update WCID attribute table and IVEIV table for this group key table
-						RTMPAddWcidAttributeEntry(pAd, BSS0, idx, CipherAlg, NULL);
-					}
-				}
-
-
-			}
-		}
-		// If WPANone is enabled, add key material and cipherAlg into Asic
-		// Fill in Shared Key Table(offset: 0x6c00) and Shared Key Mode(offset: 0x7000)
-		else if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
-		{
-			pAd->StaCfg.DefaultKeyId = 0;	// always be zero
-
-            NdisZeroMemory(&pAd->SharedKey[BSS0][0], sizeof(CIPHER_KEY));
-							pAd->SharedKey[BSS0][0].KeyLen = LEN_TKIP_EK;
-			NdisMoveMemory(pAd->SharedKey[BSS0][0].Key, pAd->StaCfg.PMK, LEN_TKIP_EK);
-
-            if (pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled)
-            {
-    			NdisMoveMemory(pAd->SharedKey[BSS0][0].RxMic, &pAd->StaCfg.PMK[16], LEN_TKIP_RXMICK);
-    			NdisMoveMemory(pAd->SharedKey[BSS0][0].TxMic, &pAd->StaCfg.PMK[16], LEN_TKIP_TXMICK);
-            }
-
-			// Decide its ChiperAlg
-			if (pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled)
-				pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_TKIP;
-			else if (pAd->StaCfg.PairCipher == Ndis802_11Encryption3Enabled)
-				pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_AES;
-			else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Unknow Cipher (=%d), set Cipher to AES\n", pAd->StaCfg.PairCipher));
-				pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_AES;
-            }
-
-			// Set key material and cipherAlg to Asic
-			AsicAddSharedKeyEntry(pAd,
-								  BSS0,
-								  0,
-								  pAd->SharedKey[BSS0][0].CipherAlg,
-								  pAd->SharedKey[BSS0][0].Key,
-								  pAd->SharedKey[BSS0][0].TxMic,
-								  pAd->SharedKey[BSS0][0].RxMic);
-
-            // Update WCID attribute table and IVEIV table for this group key table
-			RTMPAddWcidAttributeEntry(pAd, BSS0, 0, pAd->SharedKey[BSS0][0].CipherAlg, NULL);
-
-		}
-
-	}
-	else // BSS_INFRA
-	{
-		// Check the new SSID with last SSID
-		while (Cancelled == TRUE)
-		{
-			if (pAd->CommonCfg.LastSsidLen == pAd->CommonCfg.SsidLen)
-			{
-				if (RTMPCompareMemory(pAd->CommonCfg.LastSsid, pAd->CommonCfg.Ssid, pAd->CommonCfg.LastSsidLen) == 0)
-				{
-					// Link to the old one no linkdown is required.
-					break;
-				}
-			}
-			// Send link down event before set to link up
-			pAd->IndicateMediaState = NdisMediaStateDisconnected;
-			RTMP_IndicateMediaState(pAd);
-            pAd->ExtraInfo = GENERAL_LINK_DOWN;
-			DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event AA!\n"));
-			break;
-		}
-
-		//
-		// On WPA mode, Remove All Keys if not connect to the last BSSID
-		// Key will be set after 4-way handshake.
-		//
-		if ((pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA))
-		{
-			ULONG 		IV;
-
-			// Remove all WPA keys
-			RTMPWPARemoveAllKeys(pAd);
-			pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-			pAd->StaCfg.PrivacyFilter = Ndis802_11PrivFilter8021xWEP;
-
-			// Fixed connection failed with Range Maximizer - 515 AP (Marvell Chip) when security is WPAPSK/TKIP
-			// If IV related values are too large in GroupMsg2, AP would ignore this message.
-			IV = 0;
-			IV |= (pAd->StaCfg.DefaultKeyId << 30);
-			AsicUpdateWCIDIVEIV(pAd, BSSID_WCID, IV, 0);
-		}
-		// NOTE:
-		// the decision of using "short slot time" or not may change dynamically due to
-		// new STA association to the AP. so we have to decide that upon parsing BEACON, not here
-
-		// NOTE:
-		// the decision to use "RTC/CTS" or "CTS-to-self" protection or not may change dynamically
-		// due to new STA association to the AP. so we have to decide that upon parsing BEACON, not here
-
-		ComposePsPoll(pAd);
-		ComposeNullFrame(pAd);
-
-			AsicEnableBssSync(pAd);
-
-		// Add BSSID to WCID search table
-		AsicUpdateRxWCIDTable(pAd, BSSID_WCID, pAd->CommonCfg.Bssid);
-
-		NdisAcquireSpinLock(&pAd->MacTabLock);
-		// add this BSSID entry into HASH table
-		{
-			UCHAR HashIdx;
-
-			//pEntry = &pAd->MacTab.Content[BSSID_WCID];
-			HashIdx = MAC_ADDR_HASH_INDEX(pAd->CommonCfg.Bssid);
-			if (pAd->MacTab.Hash[HashIdx] == NULL)
-			{
-				pAd->MacTab.Hash[HashIdx] = pEntry;
-			}
-			else
-			{
-				pCurrEntry = pAd->MacTab.Hash[HashIdx];
-				while (pCurrEntry->pNext != NULL)
-					pCurrEntry = pCurrEntry->pNext;
-				pCurrEntry->pNext = pEntry;
-			}
-		}
-		NdisReleaseSpinLock(&pAd->MacTabLock);
-
-
-		// If WEP is enabled, add paiewise and shared key
-#ifdef WPA_SUPPLICANT_SUPPORT
-        if (((pAd->StaCfg.WpaSupplicantUP)&&
-             (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled)&&
-             (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED)) ||
-            ((pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_DISABLE)&&
-              (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled)))
-#else
-		if (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled)
-#endif // WPA_SUPPLICANT_SUPPORT //
-		{
-			PUCHAR	Key;
-			UCHAR 	CipherAlg;
-
-			for (idx=0; idx < SHARE_KEY_NUM; idx++)
-        	{
-				CipherAlg = pAd->SharedKey[BSS0][idx].CipherAlg;
-    			Key = pAd->SharedKey[BSS0][idx].Key;
-
-				if (pAd->SharedKey[BSS0][idx].KeyLen > 0)
-				{
-					// Set key material and cipherAlg to Asic
-    				AsicAddSharedKeyEntry(pAd, BSS0, idx, CipherAlg, Key, NULL, NULL);
-
-					if (idx == pAd->StaCfg.DefaultKeyId)
-					{
-						// Assign group key info
-						RTMPAddWcidAttributeEntry(pAd, BSS0, idx, CipherAlg, NULL);
-
-						// Assign pairwise key info
-						RTMPAddWcidAttributeEntry(pAd, BSS0, idx, CipherAlg, pEntry);
-					}
-				}
-			}
-		}
-
-		// only INFRASTRUCTURE mode need to indicate connectivity immediately; ADHOC mode
-		// should wait until at least 2 active nodes in this BSSID.
-		OPSTATUS_SET_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
-
-        // For GUI ++
-		if (pAd->StaCfg.AuthMode < Ndis802_11AuthModeWPA)
-		{
-			pAd->IndicateMediaState = NdisMediaStateConnected;
-			pAd->ExtraInfo = GENERAL_LINK_UP;
-			RTMP_IndicateMediaState(pAd);
-		}
-        // --
-
-		// Add BSSID in my MAC Table.
-        NdisAcquireSpinLock(&pAd->MacTabLock);
-		RTMPMoveMemory(pAd->MacTab.Content[BSSID_WCID].Addr, pAd->CommonCfg.Bssid, MAC_ADDR_LEN);
-		pAd->MacTab.Content[BSSID_WCID].Aid = BSSID_WCID;
-		pAd->MacTab.Content[BSSID_WCID].pAd = pAd;
-		pAd->MacTab.Content[BSSID_WCID].ValidAsCLI = TRUE;	//Although this is bssid..still set ValidAsCl
-		pAd->MacTab.Size = 1;	// infra mode always set MACtab size =1.
-		pAd->MacTab.Content[BSSID_WCID].Sst = SST_ASSOC;
-		pAd->MacTab.Content[BSSID_WCID].AuthState = SST_ASSOC;
-		pAd->MacTab.Content[BSSID_WCID].AuthMode = pAd->StaCfg.AuthMode;
-		pAd->MacTab.Content[BSSID_WCID].WepStatus = pAd->StaCfg.WepStatus;
-        NdisReleaseSpinLock(&pAd->MacTabLock);
-
-		DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK UP !!!  ClientStatusFlags=%lx)\n",
-			pAd->MacTab.Content[BSSID_WCID].ClientStatusFlags));
-
-		MlmeUpdateTxRates(pAd, TRUE, BSS0);
-#ifdef DOT11_N_SUPPORT
-		MlmeUpdateHtTxRates(pAd, BSS0);
-		DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK UP !! (StaActive.bHtEnable =%d, )\n", pAd->StaActive.SupportedPhyInfo.bHtEnable));
-#endif // DOT11_N_SUPPORT //
-
-		//
-		// Report Adjacent AP report.
-		//
-#ifdef LEAP_SUPPORT
-		CCXAdjacentAPReport(pAd);
-#endif // LEAP_SUPPORT //
-
-		if (pAd->CommonCfg.bAggregationCapable)
-		{
-			if ((pAd->CommonCfg.bPiggyBackCapable) && (pAd->MlmeAux.APRalinkIe & 0x00000003) == 3)
-			{
-
-				OPSTATUS_SET_FLAG(pAd, fOP_STATUS_PIGGYBACK_INUSED);
-				OPSTATUS_SET_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED);
-                RTMPSetPiggyBack(pAd, TRUE);
-				DBGPRINT(RT_DEBUG_TRACE, ("Turn on Piggy-Back\n"));
-			}
-			else if (pAd->MlmeAux.APRalinkIe & 0x00000001)
-			{
-				OPSTATUS_SET_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED);
-			}
-		}
-
-		if (pAd->MlmeAux.APRalinkIe != 0x0)
-		{
-#ifdef DOT11_N_SUPPORT
-			if (CLIENT_STATUS_TEST_FLAG(&pAd->MacTab.Content[BSSID_WCID], fCLIENT_STATUS_RDG_CAPABLE))
-			{
-				AsicEnableRDG(pAd);
-			}
-#endif // DOT11_N_SUPPORT //
-			OPSTATUS_SET_FLAG(pAd, fCLIENT_STATUS_RALINK_CHIPSET);
-			CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[BSSID_WCID], fCLIENT_STATUS_RALINK_CHIPSET);
-		}
-		else
-		{
-			OPSTATUS_CLEAR_FLAG(pAd, fCLIENT_STATUS_RALINK_CHIPSET);
-			CLIENT_STATUS_CLEAR_FLAG(&pAd->MacTab.Content[BSSID_WCID], fCLIENT_STATUS_RALINK_CHIPSET);
-		}
-	}
-
-#ifdef DOT11_N_SUPPORT
-	DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_CONNECT Event B!.BACapability = %x. ClientStatusFlags = %lx\n", pAd->CommonCfg.BACapability.word, pAd->MacTab.Content[BSSID_WCID].ClientStatusFlags));
-#endif // DOT11_N_SUPPORT //
-
-	// Set LED
-	RTMPSetLED(pAd, LED_LINK_UP);
-
-	pAd->Mlme.PeriodicRound = 0;
-	pAd->Mlme.OneSecPeriodicRound = 0;
-	pAd->bConfigChanged = FALSE;        // Reset config flag
-	pAd->ExtraInfo = GENERAL_LINK_UP;   // Update extra information to link is up
-
-	// Set asic auto fall back
-	{
-		PUCHAR					pTable;
-		UCHAR					TableSize = 0;
-
-		MlmeSelectTxRateTable(pAd, &pAd->MacTab.Content[BSSID_WCID], &pTable, &TableSize, &pAd->CommonCfg.TxRateIndex);
-		AsicUpdateAutoFallBackTable(pAd, pTable);
-	}
-
-	NdisAcquireSpinLock(&pAd->MacTabLock);
-    pEntry->HTPhyMode.word = pAd->StaCfg.HTPhyMode.word;
-    pEntry->MaxHTPhyMode.word = pAd->StaCfg.HTPhyMode.word;
-	if (pAd->StaCfg.bAutoTxRateSwitch == FALSE)
-	{
-		pEntry->bAutoTxRateSwitch = FALSE;
-#ifdef DOT11_N_SUPPORT
-		if (pEntry->HTPhyMode.field.MCS == 32)
-			pEntry->HTPhyMode.field.ShortGI = GI_800;
-
-		if ((pEntry->HTPhyMode.field.MCS > MCS_7) || (pEntry->HTPhyMode.field.MCS == 32))
-			pEntry->HTPhyMode.field.STBC = STBC_NONE;
-#endif // DOT11_N_SUPPORT //
-		// If the legacy mode is set, overwrite the transmit setting of this entry.
-		if (pEntry->HTPhyMode.field.MODE <= MODE_OFDM)
-			RTMPUpdateLegacyTxSetting((UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode, pEntry);
-	}
-	else
-		pEntry->bAutoTxRateSwitch = TRUE;
-	NdisReleaseSpinLock(&pAd->MacTabLock);
-
-	//  Let Link Status Page display first initial rate.
-	pAd->LastTxRate = (USHORT)(pEntry->HTPhyMode.word);
-	// Select DAC according to HT or Legacy
-	if (pAd->StaActive.SupportedPhyInfo.MCSSet[0] != 0x00)
-	{
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &Value);
-		Value &= (~0x18);
-		if (pAd->Antenna.field.TxPath == 2)
-		{
-		    Value |= 0x10;
-		}
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, Value);
-	}
-	else
-	{
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &Value);
-		Value &= (~0x18);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, Value);
-	}
-
-#ifdef DOT11_N_SUPPORT
-	if (pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE)
-	{
-	}
-	else if (pEntry->MaxRAmpduFactor == 0)
-	{
-	    // If HT AP doesn't support MaxRAmpduFactor = 1, we need to set max PSDU to 0.
-	    // Because our Init value is 1 at MACRegTable.
-		RTMP_IO_WRITE32(pAd, MAX_LEN_CFG, 0x0fff);
-	}
-#endif // DOT11_N_SUPPORT //
-
-	// Patch for Marvel AP to gain high throughput
-	// Need to set as following,
-	// 1. Set txop in register-EDCA_AC0_CFG as 0x60
-	// 2. Set EnTXWriteBackDDONE in register-WPDMA_GLO_CFG as zero
-	// 3. PBF_MAX_PCNT as 0x1F3FBF9F
-	// 4. kick per two packets when dequeue
-	//
-	// Txop can only be modified when RDG is off, WMM is disable and TxBurst is enable
-	//
-	// if 1. Legacy AP WMM on,  or 2. 11n AP, AMPDU disable.  Force turn off burst no matter what bEnableTxBurst is.
-#ifdef DOT11_N_SUPPORT
-//	if ((!IS_RT30xx(pAd)) &&
-	if (!((pAd->CommonCfg.RxStream == 1)&&(pAd->CommonCfg.TxStream == 1)) &&
-		(((pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED))
-		|| ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE) && (pAd->CommonCfg.BACapability.field.Policy == BA_NOTUSE))))
-	{
-		RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &Data);
-		Data  &= 0xFFFFFF00;
-		RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, Data);
-
-		RTMP_IO_WRITE32(pAd, PBF_MAX_PCNT, 0x1F3F7F9F);
-		DBGPRINT(RT_DEBUG_TRACE, ("Txburst 1\n"));
-	}
-	else
-#endif // DOT11_N_SUPPORT //
-	if (pAd->CommonCfg.bEnableTxBurst)
-	{
-		RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &Data);
-		Data  &= 0xFFFFFF00;
-		Data  |= 0x60;
-		RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, Data);
-		pAd->CommonCfg.IOTestParm.bNowAtherosBurstOn = TRUE;
-
-		RTMP_IO_WRITE32(pAd, PBF_MAX_PCNT, 0x1F3FBF9F);
-		DBGPRINT(RT_DEBUG_TRACE, ("Txburst 2\n"));
-	}
-	else
-	{
-		RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &Data);
-		Data  &= 0xFFFFFF00;
-		RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, Data);
-
-		RTMP_IO_WRITE32(pAd, PBF_MAX_PCNT, 0x1F3F7F9F);
-		DBGPRINT(RT_DEBUG_TRACE, ("Txburst 3\n"));
-	}
-
-#ifdef DOT11_N_SUPPORT
-	// Re-check to turn on TX burst or not.
-	if ((pAd->CommonCfg.IOTestParm.bLastAtheros == TRUE) && ((STA_WEP_ON(pAd))||(STA_TKIP_ON(pAd))))
-	{
-		pAd->CommonCfg.IOTestParm.bNextDisableRxBA = TRUE;
-		if (pAd->CommonCfg.bEnableTxBurst)
-		{
-		    UINT32 MACValue = 0;
-			// Force disable  TXOP value in this case. The same action in MLMEUpdateProtect too.
-			// I didn't change PBF_MAX_PCNT setting.
-			RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &MACValue);
-			MACValue  &= 0xFFFFFF00;
-			RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, MACValue);
-			pAd->CommonCfg.IOTestParm.bNowAtherosBurstOn = FALSE;
-		}
-	}
-	else
-	{
-		pAd->CommonCfg.IOTestParm.bNextDisableRxBA = FALSE;
-	}
-#endif // DOT11_N_SUPPORT //
-
-	pAd->CommonCfg.IOTestParm.bLastAtheros = FALSE;
-	COPY_MAC_ADDR(pAd->CommonCfg.LastBssid, pAd->CommonCfg.Bssid);
-	DBGPRINT(RT_DEBUG_TRACE, ("!!!pAd->bNextDisableRxBA= %d \n", pAd->CommonCfg.IOTestParm.bNextDisableRxBA));
-	// BSSID add in one MAC entry too.  Because in Tx, ASIC need to check Cipher and IV/EIV, BAbitmap
-	// Pther information in MACTab.Content[BSSID_WCID] is not necessary for driver.
-	// Note: As STA, The MACTab.Content[BSSID_WCID]. PairwiseKey and Shared Key for BSS0 are the same.
-
-    if (pAd->StaCfg.WepStatus <= Ndis802_11WEPDisabled)
-    {
-        pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-		pAd->StaCfg.PrivacyFilter = Ndis802_11PrivFilterAcceptAll;
-	}
-
-	NdisAcquireSpinLock(&pAd->MacTabLock);
-	pEntry->PortSecured = pAd->StaCfg.PortSecured;
-	NdisReleaseSpinLock(&pAd->MacTabLock);
-
-    //
-	// Patch Atheros AP TX will breakdown issue.
-	// AP Model: DLink DWL-8200AP
-	//
-	if (INFRA_ON(pAd) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) && STA_TKIP_ON(pAd))
-	{
-		RTMP_IO_WRITE32(pAd, RX_PARSER_CFG, 0x01);
-	}
-	else
-	{
-		RTMP_IO_WRITE32(pAd, RX_PARSER_CFG, 0x00);
-	}
-
-	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
-
-#ifdef DOT11_N_SUPPORT
-#ifdef DOT11N_DRAFT3
-	if ((pAd->CommonCfg.BACapability.field.b2040CoexistScanSup) && (pAd->CommonCfg.Channel <= 11))
-	{
-		OPSTATUS_SET_FLAG(pAd, fOP_STATUS_SCAN_2040);
-		BuildEffectedChannelList(pAd);
-	}
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
-}
-
-/*
-	==========================================================================
-
-	Routine	Description:
-		Disconnect current BSSID
-
-	Arguments:
-		pAd				- Pointer to our adapter
-		IsReqFromAP		- Request from AP
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-		We need more information to know it's this requst from AP.
-		If yes! we need to do extra handling, for example, remove the WPA key.
-		Otherwise on 4-way handshaking will faied, since the WPA key didn't be
-		remove while auto reconnect.
-		Disconnect request from AP, it means we will start afresh 4-way handshaking
-		on WPA mode.
-
-	==========================================================================
-*/
-VOID LinkDown(
-	IN PRTMP_ADAPTER pAd,
-	IN  BOOLEAN      IsReqFromAP)
-{
-	UCHAR			    i, ByteValue = 0;
-
-	// Do nothing if monitor mode is on
-	if (MONITOR_ON(pAd))
-		return;
-
-#ifdef RALINK_ATE
-	// Nothing to do in ATE mode.
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-    if (pAd->CommonCfg.bWirelessEvent)
-	{
-		RTMPSendWirelessEvent(pAd, IW_STA_LINKDOWN_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK DOWN !!!\n"));
-	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED);
-
-	if (ADHOC_ON(pAd))		// Adhoc mode link down
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK DOWN 1!!!\n"));
-
-		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_ADHOC_ON);
-		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
-		pAd->IndicateMediaState = NdisMediaStateDisconnected;
-		RTMP_IndicateMediaState(pAd);
-        pAd->ExtraInfo = GENERAL_LINK_DOWN;
-		BssTableDeleteEntry(&pAd->ScanTab, pAd->CommonCfg.Bssid, pAd->CommonCfg.Channel);
-		DBGPRINT(RT_DEBUG_TRACE, ("!!! MacTab.Size=%d !!!\n", pAd->MacTab.Size));
-	}
-	else					// Infra structure mode
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK DOWN 2!!!\n"));
-
-#ifdef QOS_DLS_SUPPORT
-		// DLS tear down frame must be sent before link down
-		// send DLS-TEAR_DOWN message
-		if (pAd->CommonCfg.bDLSCapable)
-		{
-			// tear down local dls table entry
-			for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-			{
-				if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
-				{
-					pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
-					RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
-				}
-			}
-
-			// tear down peer dls table entry
-			for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
-			{
-				if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status ==  DLS_FINISH))
-				{
-					pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
-					RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
-				}
-			}
-		}
-#endif // QOS_DLS_SUPPORT //
-
-		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_INFRA_ON);
-		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
-
-		// Saved last SSID for linkup comparison
-		pAd->CommonCfg.LastSsidLen = pAd->CommonCfg.SsidLen;
-		NdisMoveMemory(pAd->CommonCfg.LastSsid, pAd->CommonCfg.Ssid, pAd->CommonCfg.LastSsidLen);
-		COPY_MAC_ADDR(pAd->CommonCfg.LastBssid, pAd->CommonCfg.Bssid);
-		if (pAd->MlmeAux.CurrReqIsFromNdis == TRUE)
-		{
-			pAd->IndicateMediaState = NdisMediaStateDisconnected;
-			RTMP_IndicateMediaState(pAd);
-            pAd->ExtraInfo = GENERAL_LINK_DOWN;
-			DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event A!\n"));
-			pAd->MlmeAux.CurrReqIsFromNdis = FALSE;
-		}
-		else
-		{
-            //
-			// If disassociation request is from NDIS, then we don't need to delete BSSID from entry.
-			// Otherwise lost beacon or receive De-Authentication from AP,
-			// then we should delete BSSID from BssTable.
-			// If we don't delete from entry, roaming will fail.
-			//
-			BssTableDeleteEntry(&pAd->ScanTab, pAd->CommonCfg.Bssid, pAd->CommonCfg.Channel);
-		}
-
-		// restore back to -
-		//      1. long slot (20 us) or short slot (9 us) time
-		//      2. turn on/off RTS/CTS and/or CTS-to-self protection
-		//      3. short preamble
-		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_BG_PROTECTION_INUSED);
-
-		if (pAd->StaCfg.CCXAdjacentAPReportFlag == TRUE)
-		{
-			//
-			// Record current AP's information.
-			// for later used reporting Adjacent AP report.
-			//
-			pAd->StaCfg.CCXAdjacentAPChannel = pAd->CommonCfg.Channel;
-			pAd->StaCfg.CCXAdjacentAPSsidLen = pAd->CommonCfg.SsidLen;
-			NdisMoveMemory(pAd->StaCfg.CCXAdjacentAPSsid, pAd->CommonCfg.Ssid, pAd->StaCfg.CCXAdjacentAPSsidLen);
-			COPY_MAC_ADDR(pAd->StaCfg.CCXAdjacentAPBssid, pAd->CommonCfg.Bssid);
-		}
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-		// Country IE of the AP will be evaluated and will be used.
-		if (pAd->StaCfg.IEEE80211dClientMode != Rt802_11_D_None)
-		{
-			NdisMoveMemory(&pAd->CommonCfg.CountryCode[0], &pAd->StaCfg.StaOriCountryCode[0], 2);
-			pAd->CommonCfg.Geography = pAd->StaCfg.StaOriGeography;
-			BuildChannelListEx(pAd);
-		}
-#endif // EXT_BUILD_CHANNEL_LIST //
-
-	}
-
-	for (i=1; i<MAX_LEN_OF_MAC_TABLE; i++)
-	{
-		if (pAd->MacTab.Content[i].ValidAsCLI == TRUE)
-			MacTableDeleteEntry(pAd, pAd->MacTab.Content[i].Aid, pAd->MacTab.Content[i].Addr);
-	}
-
-	pAd->StaCfg.CCXQosECWMin	= 4;
-	pAd->StaCfg.CCXQosECWMax	= 10;
-
-	AsicSetSlotTime(pAd, TRUE); //FALSE);
-	AsicSetEdcaParm(pAd, NULL);
-
-	// Set LED
-	RTMPSetLED(pAd, LED_LINK_DOWN);
-    pAd->LedIndicatorStregth = 0xF0;
-    RTMPSetSignalLED(pAd, -100);	// Force signal strength Led to be turned off, firmware is not done it.
-
-		AsicDisableSync(pAd);
-
-	pAd->Mlme.PeriodicRound = 0;
-	pAd->Mlme.OneSecPeriodicRound = 0;
-
-	if (pAd->StaCfg.BssType == BSS_INFRA)
-	{
-	// Remove StaCfg Information after link down
-	NdisZeroMemory(pAd->CommonCfg.Bssid, MAC_ADDR_LEN);
-	NdisZeroMemory(pAd->CommonCfg.Ssid, MAX_LEN_OF_SSID);
-		pAd->CommonCfg.SsidLen = 0;
-	}
-#ifdef DOT11_N_SUPPORT
-	NdisZeroMemory(&pAd->MlmeAux.HtCapability, sizeof(HT_CAPABILITY_IE));
-	NdisZeroMemory(&pAd->MlmeAux.AddHtInfo, sizeof(ADD_HT_INFO_IE));
-	pAd->MlmeAux.HtCapabilityLen = 0;
-	pAd->MlmeAux.NewExtChannelOffset = 0xff;
-#endif // DOT11_N_SUPPORT //
-
-	// Reset WPA-PSK state. Only reset when supplicant enabled
-	if (pAd->StaCfg.WpaState != SS_NOTUSE)
-	{
-		pAd->StaCfg.WpaState = SS_START;
-		// Clear Replay counter
-		NdisZeroMemory(pAd->StaCfg.ReplayCounter, 8);
-
-#ifdef QOS_DLS_SUPPORT
-		if (pAd->CommonCfg.bDLSCapable)
-			NdisZeroMemory(pAd->StaCfg.DlsReplayCounter, 8);
-#endif // QOS_DLS_SUPPORT //
-	}
-
-
-	//
-	// if link down come from AP, we need to remove all WPA keys on WPA mode.
-	// otherwise will cause 4-way handshaking failed, since the WPA key not empty.
-	//
-	if ((IsReqFromAP) && (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA))
-	{
-		// Remove all WPA keys
-		RTMPWPARemoveAllKeys(pAd);
-	}
-
-	// 802.1x port control
-#ifdef WPA_SUPPLICANT_SUPPORT
-	// Prevent clear PortSecured here with static WEP
-	// NetworkManger set security policy first then set SSID to connect AP.
-	if (pAd->StaCfg.WpaSupplicantUP &&
-		(pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled) &&
-		(pAd->StaCfg.IEEE8021X == FALSE))
-	{
-		pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-	}
-	else
-#endif // WPA_SUPPLICANT_SUPPORT //
-	{
-		pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-		pAd->StaCfg.PrivacyFilter = Ndis802_11PrivFilter8021xWEP;
-	}
-
-	NdisAcquireSpinLock(&pAd->MacTabLock);
-	pAd->MacTab.Content[BSSID_WCID].PortSecured = pAd->StaCfg.PortSecured;
-	NdisReleaseSpinLock(&pAd->MacTabLock);
-
-	pAd->StaCfg.MicErrCnt = 0;
-
-	// Turn off Ckip control flag
-	pAd->StaCfg.bCkipOn = FALSE;
-	pAd->StaCfg.CCXEnable = FALSE;
-
-    pAd->IndicateMediaState = NdisMediaStateDisconnected;
-	// Update extra information to link is up
-	pAd->ExtraInfo = GENERAL_LINK_DOWN;
-
-    //pAd->StaCfg.AdhocBOnlyJoined = FALSE;
-	//pAd->StaCfg.AdhocBGJoined = FALSE;
-	//pAd->StaCfg.Adhoc20NJoined = FALSE;
-    pAd->StaActive.SupportedPhyInfo.bHtEnable = FALSE;
-
-	// Reset the Current AP's IP address
-	NdisZeroMemory(pAd->StaCfg.AironetIPAddress, 4);
-#ifdef RT2870
-	pAd->bUsbTxBulkAggre = FALSE;
-#endif // RT2870 //
-
-	// Clean association information
-	NdisZeroMemory(&pAd->StaCfg.AssocInfo, sizeof(NDIS_802_11_ASSOCIATION_INFORMATION));
-	pAd->StaCfg.AssocInfo.Length = sizeof(NDIS_802_11_ASSOCIATION_INFORMATION);
-	pAd->StaCfg.ReqVarIELen = 0;
-	pAd->StaCfg.ResVarIELen = 0;
-
-	//
-	// Reset RSSI value after link down
-	//
-	pAd->StaCfg.RssiSample.AvgRssi0 = 0;
-	pAd->StaCfg.RssiSample.AvgRssi0X8 = 0;
-	pAd->StaCfg.RssiSample.AvgRssi1 = 0;
-	pAd->StaCfg.RssiSample.AvgRssi1X8 = 0;
-	pAd->StaCfg.RssiSample.AvgRssi2 = 0;
-	pAd->StaCfg.RssiSample.AvgRssi2X8 = 0;
-
-	// Restore MlmeRate
-	pAd->CommonCfg.MlmeRate = pAd->CommonCfg.BasicMlmeRate;
-	pAd->CommonCfg.RtsRate = pAd->CommonCfg.BasicMlmeRate;
-
-#ifdef DOT11_N_SUPPORT
-	//
-	// After Link down, reset piggy-back setting in ASIC. Disable RDG.
-	//
-	if (pAd->CommonCfg.BBPCurrentBW == BW_40)
-	{
-		pAd->CommonCfg.BBPCurrentBW = BW_20;
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &ByteValue);
-		ByteValue &= (~0x18);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, ByteValue);
-	}
-#endif // DOT11_N_SUPPORT //
-	// Reset DAC
-	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &ByteValue);
-	ByteValue &= (~0x18);
-	if (pAd->Antenna.field.TxPath == 2)
-	{
-		ByteValue |= 0x10;
-	}
-	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, ByteValue);
-
-	RTMPSetPiggyBack(pAd,FALSE);
-	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_PIGGYBACK_INUSED);
-
-#ifdef DOT11_N_SUPPORT
-	pAd->CommonCfg.BACapability.word = pAd->CommonCfg.REGBACapability.word;
-#endif // DOT11_N_SUPPORT //
-
-	// Restore all settings in the following.
-	AsicUpdateProtect(pAd, 0, (ALLN_SETPROTECT|CCKSETPROTECT|OFDMSETPROTECT), TRUE, FALSE);
-	AsicDisableRDG(pAd);
-	pAd->CommonCfg.IOTestParm.bCurrentAtheros = FALSE;
-	pAd->CommonCfg.IOTestParm.bNowAtherosBurstOn = FALSE;
-
-#ifdef DOT11_N_SUPPORT
-#ifdef DOT11N_DRAFT3
-	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SCAN_2040);
-	pAd->CommonCfg.BSSCoexist2040.word = 0;
-	TriEventInit(pAd);
-	for (i = 0; i < (pAd->ChannelListNum - 1); i++)
-	{
-		pAd->ChannelList[i].bEffectedChannel = FALSE;
-	}
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
-
-	RTMP_IO_WRITE32(pAd, MAX_LEN_CFG, 0x1fff);
-	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
-	if (pAd->StaCfg.WpaSupplicantUP) {
-		union iwreq_data    wrqu;
-		//send disassociate event to wpa_supplicant
-		memset(&wrqu, 0, sizeof(wrqu));
-		wrqu.data.flags = RT_DISASSOC_EVENT_FLAG;
-		wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL);
-	}
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-	{
-		union iwreq_data    wrqu;
-		memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN);
-		wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
-	}
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-
-#ifdef RT30xx
-	if (IS_RT3090(pAd))
-	{
-		UINT32				macdata;
-		// disable MMPS BBP control register
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &ByteValue);
-		ByteValue &= ~(0x04);	//bit 2
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, ByteValue);
-
-		// disable MMPS MAC control register
-		RTMP_IO_READ32(pAd, 0x1210, &macdata);
-		macdata &= ~(0x09);	//bit 0, 3
-		RTMP_IO_WRITE32(pAd, 0x1210, macdata);
-	}
-#endif // RT30xx //
-
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID IterateOnBssTab(
-	IN PRTMP_ADAPTER pAd)
-{
-	MLME_START_REQ_STRUCT   StartReq;
-	MLME_JOIN_REQ_STRUCT    JoinReq;
-	ULONG                   BssIdx;
-
-	// Change the wepstatus to original wepstatus
-	pAd->StaCfg.WepStatus   = pAd->StaCfg.OrigWepStatus;
-	pAd->StaCfg.PairCipher  = pAd->StaCfg.OrigWepStatus;
-	pAd->StaCfg.GroupCipher = pAd->StaCfg.OrigWepStatus;
-
-	BssIdx = pAd->MlmeAux.BssIdx;
-	if (BssIdx < pAd->MlmeAux.SsidBssTab.BssNr)
-	{
-		// Check cipher suite, AP must have more secured cipher than station setting
-		// Set the Pairwise and Group cipher to match the intended AP setting
-		// We can only connect to AP with less secured cipher setting
-		if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK))
-		{
-			pAd->StaCfg.GroupCipher = pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA.GroupCipher;
-
-			if (pAd->StaCfg.WepStatus == pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA.PairCipher)
-				pAd->StaCfg.PairCipher = pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA.PairCipher;
-			else if (pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA.PairCipherAux != Ndis802_11WEPDisabled)
-				pAd->StaCfg.PairCipher = pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA.PairCipherAux;
-			else	// There is no PairCipher Aux, downgrade our capability to TKIP
-				pAd->StaCfg.PairCipher = Ndis802_11Encryption2Enabled;
-		}
-		else if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK))
-		{
-			pAd->StaCfg.GroupCipher = pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA2.GroupCipher;
-
-			if (pAd->StaCfg.WepStatus == pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA2.PairCipher)
-				pAd->StaCfg.PairCipher = pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA2.PairCipher;
-			else if (pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA2.PairCipherAux != Ndis802_11WEPDisabled)
-				pAd->StaCfg.PairCipher = pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA2.PairCipherAux;
-			else	// There is no PairCipher Aux, downgrade our capability to TKIP
-				pAd->StaCfg.PairCipher = Ndis802_11Encryption2Enabled;
-
-			// RSN capability
-			pAd->StaCfg.RsnCapability = pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA2.RsnCapability;
-		}
-
-		// Set Mix cipher flag
-		pAd->StaCfg.bMixCipher = (pAd->StaCfg.PairCipher == pAd->StaCfg.GroupCipher) ? FALSE : TRUE;
-		if (pAd->StaCfg.bMixCipher == TRUE)
-		{
-			// If mix cipher, re-build RSNIE
-			RTMPMakeRSNIE(pAd, pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus, 0);
-		}
-
-		DBGPRINT(RT_DEBUG_TRACE, ("CNTL - iterate BSS %ld of %d\n", BssIdx, pAd->MlmeAux.SsidBssTab.BssNr));
-		JoinParmFill(pAd, &JoinReq, BssIdx);
-		MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_JOIN_REQ, sizeof(MLME_JOIN_REQ_STRUCT),
-					&JoinReq);
-		pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_JOIN;
-	}
-	else if (pAd->StaCfg.BssType == BSS_ADHOC)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("CNTL - All BSS fail; start a new ADHOC (Ssid=%s)...\n",pAd->MlmeAux.Ssid));
-		StartParmFill(pAd, &StartReq, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen);
-		MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_START_REQ, sizeof(MLME_START_REQ_STRUCT), &StartReq);
-		pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_START;
-	}
-	else // no more BSS
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("CNTL - All roaming failed, stay @ ch #%d\n", pAd->CommonCfg.Channel));
-		AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
-		AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-		pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-	}
-}
-
-// for re-association only
-// IRQL = DISPATCH_LEVEL
-VOID IterateOnBssTab2(
-	IN PRTMP_ADAPTER pAd)
-{
-	MLME_REASSOC_REQ_STRUCT ReassocReq;
-	ULONG                   BssIdx;
-	BSS_ENTRY               *pBss;
-
-	BssIdx = pAd->MlmeAux.RoamIdx;
-	pBss = &pAd->MlmeAux.RoamTab.BssEntry[BssIdx];
-
-	if (BssIdx < pAd->MlmeAux.RoamTab.BssNr)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("CNTL - iterate BSS %ld of %d\n", BssIdx, pAd->MlmeAux.RoamTab.BssNr));
-
-		AsicSwitchChannel(pAd, pBss->Channel, FALSE);
-		AsicLockChannel(pAd, pBss->Channel);
-
-		// reassociate message has the same structure as associate message
-		AssocParmFill(pAd, &ReassocReq, pBss->Bssid, pBss->CapabilityInfo,
-					  ASSOC_TIMEOUT, pAd->StaCfg.DefaultListenCount);
-		MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_REASSOC_REQ,
-					sizeof(MLME_REASSOC_REQ_STRUCT), &ReassocReq);
-
-		pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_REASSOC;
-	}
-	else // no more BSS
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("CNTL - All fast roaming failed, back to ch #%d\n",pAd->CommonCfg.Channel));
-		AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
-		AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-		pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID JoinParmFill(
-	IN PRTMP_ADAPTER pAd,
-	IN OUT MLME_JOIN_REQ_STRUCT *JoinReq,
-	IN ULONG BssIdx)
-{
-	JoinReq->BssIdx = BssIdx;
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID ScanParmFill(
-	IN PRTMP_ADAPTER pAd,
-	IN OUT MLME_SCAN_REQ_STRUCT *ScanReq,
-	IN CHAR Ssid[],
-	IN UCHAR SsidLen,
-	IN UCHAR BssType,
-	IN UCHAR ScanType)
-{
-    NdisZeroMemory(ScanReq->Ssid, MAX_LEN_OF_SSID);
-	ScanReq->SsidLen = SsidLen;
-	NdisMoveMemory(ScanReq->Ssid, Ssid, SsidLen);
-	ScanReq->BssType = BssType;
-	ScanReq->ScanType = ScanType;
-}
-
-#ifdef QOS_DLS_SUPPORT
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID DlsParmFill(
-	IN PRTMP_ADAPTER pAd,
-	IN OUT MLME_DLS_REQ_STRUCT *pDlsReq,
-	IN PRT_802_11_DLS pDls,
-	IN USHORT reason)
-{
-	pDlsReq->pDLS = pDls;
-	pDlsReq->Reason = reason;
-}
-#endif // QOS_DLS_SUPPORT //
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID StartParmFill(
-	IN PRTMP_ADAPTER pAd,
-	IN OUT MLME_START_REQ_STRUCT *StartReq,
-	IN CHAR Ssid[],
-	IN UCHAR SsidLen)
-{
-	ASSERT(SsidLen <= MAX_LEN_OF_SSID);
-	NdisMoveMemory(StartReq->Ssid, Ssid, SsidLen);
-	StartReq->SsidLen = SsidLen;
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-VOID AuthParmFill(
-	IN PRTMP_ADAPTER pAd,
-	IN OUT MLME_AUTH_REQ_STRUCT *AuthReq,
-	IN PUCHAR pAddr,
-	IN USHORT Alg)
-{
-	COPY_MAC_ADDR(AuthReq->Addr, pAddr);
-	AuthReq->Alg = Alg;
-	AuthReq->Timeout = AUTH_TIMEOUT;
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-
-
-#ifdef RT2870
-
-VOID MlmeCntlConfirm(
-	IN PRTMP_ADAPTER pAd,
-	IN ULONG MsgType,
-	IN USHORT Msg)
-{
-	MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MsgType, sizeof(USHORT), &Msg);
-}
-
-VOID ComposePsPoll(
-	IN PRTMP_ADAPTER pAd)
-{
-	PTXINFO_STRUC		pTxInfo;
-	PTXWI_STRUC		pTxWI;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("ComposePsPoll\n"));
-	NdisZeroMemory(&pAd->PsPollFrame, sizeof(PSPOLL_FRAME));
-
-	pAd->PsPollFrame.FC.PwrMgmt = 0;
-	pAd->PsPollFrame.FC.Type = BTYPE_CNTL;
-	pAd->PsPollFrame.FC.SubType = SUBTYPE_PS_POLL;
-	pAd->PsPollFrame.Aid = pAd->StaActive.Aid | 0xC000;
-	COPY_MAC_ADDR(pAd->PsPollFrame.Bssid, pAd->CommonCfg.Bssid);
-	COPY_MAC_ADDR(pAd->PsPollFrame.Ta, pAd->CurrentAddress);
-
-	RTMPZeroMemory(&pAd->PsPollContext.TransferBuffer->field.WirelessPacket[0], 100);
-	pTxInfo = (PTXINFO_STRUC)&pAd->PsPollContext.TransferBuffer->field.WirelessPacket[0];
-	RTMPWriteTxInfo(pAd, pTxInfo, (USHORT)(sizeof(PSPOLL_FRAME)+TXWI_SIZE), TRUE, EpToQueue[MGMTPIPEIDX], FALSE,  FALSE);
-	pTxWI = (PTXWI_STRUC)&pAd->PsPollContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE];
-	RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE, TRUE, FALSE, 0, BSSID_WCID, (sizeof(PSPOLL_FRAME)),
-		0,  0, (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_BACKOFF, FALSE, &pAd->CommonCfg.MlmeTransmit);
-	RTMPMoveMemory(&pAd->PsPollContext.TransferBuffer->field.WirelessPacket[TXWI_SIZE+TXINFO_SIZE], &pAd->PsPollFrame, sizeof(PSPOLL_FRAME));
-	// Append 4 extra zero bytes.
-	pAd->PsPollContext.BulkOutSize =  TXINFO_SIZE + TXWI_SIZE + sizeof(PSPOLL_FRAME) + 4;
-}
-
-// IRQL = DISPATCH_LEVEL
-VOID ComposeNullFrame(
-	IN PRTMP_ADAPTER pAd)
-{
-	PTXINFO_STRUC		pTxInfo;
-	PTXWI_STRUC		pTxWI;
-
-	NdisZeroMemory(&pAd->NullFrame, sizeof(HEADER_802_11));
-	pAd->NullFrame.FC.Type = BTYPE_DATA;
-	pAd->NullFrame.FC.SubType = SUBTYPE_NULL_FUNC;
-	pAd->NullFrame.FC.ToDs = 1;
-	COPY_MAC_ADDR(pAd->NullFrame.Addr1, pAd->CommonCfg.Bssid);
-	COPY_MAC_ADDR(pAd->NullFrame.Addr2, pAd->CurrentAddress);
-	COPY_MAC_ADDR(pAd->NullFrame.Addr3, pAd->CommonCfg.Bssid);
-	RTMPZeroMemory(&pAd->NullContext.TransferBuffer->field.WirelessPacket[0], 100);
-	pTxInfo = (PTXINFO_STRUC)&pAd->NullContext.TransferBuffer->field.WirelessPacket[0];
-	RTMPWriteTxInfo(pAd, pTxInfo, (USHORT)(sizeof(HEADER_802_11)+TXWI_SIZE), TRUE, EpToQueue[MGMTPIPEIDX], FALSE,  FALSE);
-	pTxWI = (PTXWI_STRUC)&pAd->NullContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE];
-	RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE, TRUE, FALSE, 0, BSSID_WCID, (sizeof(HEADER_802_11)),
-		0, 0, (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_BACKOFF, FALSE, &pAd->CommonCfg.MlmeTransmit);
-	RTMPMoveMemory(&pAd->NullContext.TransferBuffer->field.WirelessPacket[TXWI_SIZE+TXINFO_SIZE], &pAd->NullFrame, sizeof(HEADER_802_11));
-	pAd->NullContext.BulkOutSize =  TXINFO_SIZE + TXWI_SIZE + sizeof(pAd->NullFrame) + 4;
-}
-#endif // RT2870 //
-
-
-/*
-	==========================================================================
-	Description:
-		Pre-build a BEACON frame in the shared memory
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
-*/
-ULONG MakeIbssBeacon(
-	IN PRTMP_ADAPTER pAd)
-{
-	UCHAR         DsLen = 1, IbssLen = 2;
-	UCHAR         LocalErpIe[3] = {IE_ERP, 1, 0x04};
-	HEADER_802_11 BcnHdr;
-	USHORT        CapabilityInfo;
-	LARGE_INTEGER FakeTimestamp;
-	ULONG         FrameLen = 0;
-	PTXWI_STRUC	  pTxWI = &pAd->BeaconTxWI;
-	CHAR         *pBeaconFrame = pAd->BeaconBuf;
-	BOOLEAN       Privacy;
-	UCHAR         SupRate[MAX_LEN_OF_SUPPORTED_RATES];
-	UCHAR         SupRateLen = 0;
-	UCHAR         ExtRate[MAX_LEN_OF_SUPPORTED_RATES];
-	UCHAR         ExtRateLen = 0;
-	UCHAR         RSNIe = IE_WPA;
-
-	if ((pAd->CommonCfg.PhyMode == PHY_11B) && (pAd->CommonCfg.Channel <= 14))
-	{
-		SupRate[0] = 0x82; // 1 mbps
-		SupRate[1] = 0x84; // 2 mbps
-		SupRate[2] = 0x8b; // 5.5 mbps
-		SupRate[3] = 0x96; // 11 mbps
-		SupRateLen = 4;
-		ExtRateLen = 0;
-	}
-	else if (pAd->CommonCfg.Channel > 14)
-	{
-		SupRate[0]  = 0x8C;    // 6 mbps, in units of 0.5 Mbps, basic rate
-		SupRate[1]  = 0x12;    // 9 mbps, in units of 0.5 Mbps
-		SupRate[2]  = 0x98;    // 12 mbps, in units of 0.5 Mbps, basic rate
-		SupRate[3]  = 0x24;    // 18 mbps, in units of 0.5 Mbps
-		SupRate[4]  = 0xb0;    // 24 mbps, in units of 0.5 Mbps, basic rate
-		SupRate[5]  = 0x48;    // 36 mbps, in units of 0.5 Mbps
-		SupRate[6]  = 0x60;    // 48 mbps, in units of 0.5 Mbps
-		SupRate[7]  = 0x6c;    // 54 mbps, in units of 0.5 Mbps
-		SupRateLen  = 8;
-		ExtRateLen  = 0;
-
-		//
-		// Also Update MlmeRate & RtsRate for G only & A only
-		//
-		pAd->CommonCfg.MlmeRate = RATE_6;
-		pAd->CommonCfg.RtsRate = RATE_6;
-		pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM;
-		pAd->CommonCfg.MlmeTransmit.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate];
-		pAd->MacTab.Content[BSS0Mcast_WCID].HTPhyMode.field.MODE = MODE_OFDM;
-		pAd->MacTab.Content[BSS0Mcast_WCID].HTPhyMode.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate];
-	}
-	else
-	{
-		SupRate[0] = 0x82; // 1 mbps
-		SupRate[1] = 0x84; // 2 mbps
-		SupRate[2] = 0x8b; // 5.5 mbps
-		SupRate[3] = 0x96; // 11 mbps
-		SupRateLen = 4;
-
-		ExtRate[0]  = 0x0C;    // 6 mbps, in units of 0.5 Mbps,
-		ExtRate[1]  = 0x12;    // 9 mbps, in units of 0.5 Mbps
-		ExtRate[2]  = 0x18;    // 12 mbps, in units of 0.5 Mbps,
-		ExtRate[3]  = 0x24;    // 18 mbps, in units of 0.5 Mbps
-		ExtRate[4]  = 0x30;    // 24 mbps, in units of 0.5 Mbps,
-		ExtRate[5]  = 0x48;    // 36 mbps, in units of 0.5 Mbps
-		ExtRate[6]  = 0x60;    // 48 mbps, in units of 0.5 Mbps
-		ExtRate[7]  = 0x6c;    // 54 mbps, in units of 0.5 Mbps
-		ExtRateLen  = 8;
-	}
-
-	pAd->StaActive.SupRateLen = SupRateLen;
-	NdisMoveMemory(pAd->StaActive.SupRate, SupRate, SupRateLen);
-	pAd->StaActive.ExtRateLen = ExtRateLen;
-	NdisMoveMemory(pAd->StaActive.ExtRate, ExtRate, ExtRateLen);
-
-	// compose IBSS beacon frame
-	MgtMacHeaderInit(pAd, &BcnHdr, SUBTYPE_BEACON, 0, BROADCAST_ADDR, pAd->CommonCfg.Bssid);
-	Privacy = (pAd->StaCfg.WepStatus == Ndis802_11Encryption1Enabled) ||
-			  (pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled) ||
-			  (pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled);
-	CapabilityInfo = CAP_GENERATE(0, 1, Privacy, (pAd->CommonCfg.TxPreamble == Rt802_11PreambleShort), 0, 0);
-
-	MakeOutgoingFrame(pBeaconFrame,                &FrameLen,
-					  sizeof(HEADER_802_11),           &BcnHdr,
-					  TIMESTAMP_LEN,                   &FakeTimestamp,
-					  2,                               &pAd->CommonCfg.BeaconPeriod,
-					  2,                               &CapabilityInfo,
-					  1,                               &SsidIe,
-					  1,                               &pAd->CommonCfg.SsidLen,
-					  pAd->CommonCfg.SsidLen,          pAd->CommonCfg.Ssid,
-					  1,                               &SupRateIe,
-					  1,                               &SupRateLen,
-					  SupRateLen,                      SupRate,
-					  1,                               &DsIe,
-					  1,                               &DsLen,
-					  1,                               &pAd->CommonCfg.Channel,
-					  1,                               &IbssIe,
-					  1,                               &IbssLen,
-					  2,                               &pAd->StaActive.AtimWin,
-					  END_OF_ARGS);
-
-	// add ERP_IE and EXT_RAE IE of in 802.11g
-	if (ExtRateLen)
-	{
-		ULONG	tmp;
-
-		MakeOutgoingFrame(pBeaconFrame + FrameLen,         &tmp,
-						  3,                               LocalErpIe,
-						  1,                               &ExtRateIe,
-						  1,                               &ExtRateLen,
-						  ExtRateLen,                      ExtRate,
-						  END_OF_ARGS);
-		FrameLen += tmp;
-	}
-
-	// If adhoc secruity is set for WPA-None, append the cipher suite IE
-	if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
-	{
-		ULONG tmp;
-        RTMPMakeRSNIE(pAd, pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus, BSS0);
-
-		MakeOutgoingFrame(pBeaconFrame + FrameLen,        	&tmp,
-						  1,                              	&RSNIe,
-						  1,                            	&pAd->StaCfg.RSNIE_Len,
-						  pAd->StaCfg.RSNIE_Len,      		pAd->StaCfg.RSN_IE,
-						  END_OF_ARGS);
-		FrameLen += tmp;
-	}
-
-#ifdef DOT11_N_SUPPORT
-	if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
-	{
-		ULONG TmpLen;
-		UCHAR HtLen, HtLen1;
-
-#ifdef RT_BIG_ENDIAN
-		HT_CAPABILITY_IE HtCapabilityTmp;
-		ADD_HT_INFO_IE	addHTInfoTmp;
-		USHORT	b2lTmp, b2lTmp2;
-#endif
-
-		// add HT Capability IE
-		HtLen = sizeof(pAd->CommonCfg.HtCapability);
-		HtLen1 = sizeof(pAd->CommonCfg.AddHTInfo);
-#ifndef RT_BIG_ENDIAN
-		MakeOutgoingFrame(pBeaconFrame+FrameLen,	&TmpLen,
-						  1,						&HtCapIe,
-						  1,						&HtLen,
-						  HtLen,					&pAd->CommonCfg.HtCapability,
-						  1,						&AddHtInfoIe,
-						  1,						&HtLen1,
-						  HtLen1,					&pAd->CommonCfg.AddHTInfo,
-						  END_OF_ARGS);
-#else
-		NdisMoveMemory(&HtCapabilityTmp, &pAd->CommonCfg.HtCapability, HtLen);
-		*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
-		*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
-
-		NdisMoveMemory(&addHTInfoTmp, &pAd->CommonCfg.AddHTInfo, HtLen1);
-		*(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
-		*(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
-
-		MakeOutgoingFrame(pBeaconFrame+FrameLen,	&TmpLen,
-						  1,						&HtCapIe,
-						  1,						&HtLen,
-						  HtLen,					&HtCapabilityTmp,
-						  1,						&AddHtInfoIe,
-						  1,						&HtLen1,
-						  HtLen1,					&addHTInfoTmp,
-						  END_OF_ARGS);
-#endif
-		FrameLen += TmpLen;
-	}
-#endif // DOT11_N_SUPPORT //
-
-	//beacon use reserved WCID 0xff
-    if (pAd->CommonCfg.Channel > 14)
-    {
-	RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE,  TRUE, FALSE, FALSE, TRUE, 0, 0xff, FrameLen,
-		PID_MGMT, PID_BEACON, RATE_1, IFS_HTTXOP, FALSE, &pAd->CommonCfg.MlmeTransmit);
-    }
-    else
-    {
-        // Set to use 1Mbps for Adhoc beacon.
-		HTTRANSMIT_SETTING Transmit;
-        Transmit.word = 0;
-        RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE,  TRUE, FALSE, FALSE, TRUE, 0, 0xff, FrameLen,
-    		PID_MGMT, PID_BEACON, RATE_1, IFS_HTTXOP, FALSE, &Transmit);
-    }
-
-#ifdef RT_BIG_ENDIAN
-	RTMPFrameEndianChange(pAd, pBeaconFrame, DIR_WRITE, FALSE);
-	RTMPWIEndianChange((PUCHAR)pTxWI, TYPE_TXWI);
-#endif
-
-    DBGPRINT(RT_DEBUG_TRACE, ("MakeIbssBeacon (len=%ld), SupRateLen=%d, ExtRateLen=%d, Channel=%d, PhyMode=%d\n",
-					FrameLen, SupRateLen, ExtRateLen, pAd->CommonCfg.Channel, pAd->CommonCfg.PhyMode));
-	return FrameLen;
-}
-
+#include "../../rt2870/sta/connect.c"
 
diff --git a/drivers/staging/rt3070/sta/dls.c b/drivers/staging/rt3070/sta/dls.c
deleted file mode 100644
index 8bcd4132934..00000000000
--- a/drivers/staging/rt3070/sta/dls.c
+++ /dev/null
@@ -1,2170 +0,0 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-    dls.c
-
-    Abstract:
-    Handle WMM-DLS state machine
-
-    Revision History:
-    Who         When          What
-    --------    ----------    ----------------------------------------------
-    Rory Chen   02-14-2006
-	Arvin Tai	06-03-2008	  Modified for RT28xx
- */
-
-#include "../rt_config.h"
-
-/*
-    ==========================================================================
-    Description:
-        dls state machine init, including state transition and timer init
-    Parameters:
-        Sm - pointer to the dls state machine
-    Note:
-        The state machine looks like this
-
-                            DLS_IDLE
-    MT2_MLME_DLS_REQUEST   MlmeDlsReqAction
-    MT2_PEER_DLS_REQUEST   PeerDlsReqAction
-    MT2_PEER_DLS_RESPONSE  PeerDlsRspAction
-    MT2_MLME_DLS_TEARDOWN  MlmeTearDownAction
-    MT2_PEER_DLS_TEARDOWN  PeerTearDownAction
-
-	IRQL = PASSIVE_LEVEL
-
-    ==========================================================================
- */
-void DlsStateMachineInit(
-    IN PRTMP_ADAPTER pAd,
-    IN STATE_MACHINE *Sm,
-    OUT STATE_MACHINE_FUNC Trans[])
-{
-	UCHAR	i;
-
-    StateMachineInit(Sm, (STATE_MACHINE_FUNC*)Trans, MAX_DLS_STATE, MAX_DLS_MSG, (STATE_MACHINE_FUNC)Drop, DLS_IDLE, DLS_MACHINE_BASE);
-
-    // the first column
-    StateMachineSetAction(Sm, DLS_IDLE, MT2_MLME_DLS_REQ, (STATE_MACHINE_FUNC)MlmeDlsReqAction);
-    StateMachineSetAction(Sm, DLS_IDLE, MT2_PEER_DLS_REQ, (STATE_MACHINE_FUNC)PeerDlsReqAction);
-    StateMachineSetAction(Sm, DLS_IDLE, MT2_PEER_DLS_RSP, (STATE_MACHINE_FUNC)PeerDlsRspAction);
-    StateMachineSetAction(Sm, DLS_IDLE, MT2_MLME_DLS_TEAR_DOWN, (STATE_MACHINE_FUNC)MlmeDlsTearDownAction);
-    StateMachineSetAction(Sm, DLS_IDLE, MT2_PEER_DLS_TEAR_DOWN, (STATE_MACHINE_FUNC)PeerDlsTearDownAction);
-
-	for (i=0; i<MAX_NUM_OF_DLS_ENTRY; i++)
-	{
-		pAd->StaCfg.DLSEntry[i].pAd = pAd;
-		RTMPInitTimer(pAd, &pAd->StaCfg.DLSEntry[i].Timer, GET_TIMER_FUNCTION(DlsTimeoutAction), pAd, FALSE);
-	}
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID MlmeDlsReqAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-	PUCHAR			pOutBuffer = NULL;
-	NDIS_STATUS		NStatus;
-	ULONG			FrameLen = 0;
-	HEADER_802_11	DlsReqHdr;
-	PRT_802_11_DLS	pDLS = NULL;
-	UCHAR			Category = CATEGORY_DLS;
-	UCHAR			Action = ACTION_DLS_REQUEST;
-	ULONG			tmp;
-	USHORT			reason;
-	ULONG			Timeout;
-	BOOLEAN			TimerCancelled;
-
-	if(!MlmeDlsReqSanity(pAd, Elem->Msg, Elem->MsgLen, &pDLS, &reason))
-		return;
-
-	DBGPRINT(RT_DEBUG_TRACE,("DLS - MlmeDlsReqAction() \n"));
-
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-	if (NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("DLS - MlmeDlsReqAction() allocate memory failed \n"));
-		return;
-	}
-
-	ActHeaderInit(pAd, &DlsReqHdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
-
-	// Build basic frame first
-	MakeOutgoingFrame(pOutBuffer,				&FrameLen,
-					sizeof(HEADER_802_11),		&DlsReqHdr,
-					1,							&Category,
-					1,							&Action,
-					6,							&pDLS->MacAddr,
-					6,							pAd->CurrentAddress,
-					2,							&pAd->StaActive.CapabilityInfo,
-					2,							&pDLS->TimeOut,
-					1,							&SupRateIe,
-					1,							&pAd->MlmeAux.SupRateLen,
-					pAd->MlmeAux.SupRateLen,	pAd->MlmeAux.SupRate,
-					END_OF_ARGS);
-
-	if (pAd->MlmeAux.ExtRateLen != 0)
-	{
-		MakeOutgoingFrame(pOutBuffer + FrameLen,	&tmp,
-						  1,						&ExtRateIe,
-						  1,						&pAd->MlmeAux.ExtRateLen,
-						  pAd->MlmeAux.ExtRateLen,	pAd->MlmeAux.ExtRate,
-						  END_OF_ARGS);
-		FrameLen += tmp;
-	}
-
-#ifdef DOT11_N_SUPPORT
-	if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
-	{
-		UCHAR HtLen;
-
-#ifdef RT_BIG_ENDIAN
-		HT_CAPABILITY_IE HtCapabilityTmp;
-#endif
-
-		// add HT Capability IE
-		HtLen = sizeof(HT_CAPABILITY_IE);
-#ifndef RT_BIG_ENDIAN
-		MakeOutgoingFrame(pOutBuffer + FrameLen,	&tmp,
-							1,						&HtCapIe,
-							1,						&HtLen,
-							HtLen,					&pAd->CommonCfg.HtCapability,
-							END_OF_ARGS);
-#else
-		NdisMoveMemory(&HtCapabilityTmp, &pAd->CommonCfg.HtCapability, HtLen);
-							*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
-							*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
-
-		MakeOutgoingFrame(pOutBuffer + FrameLen,	&tmp,
-							1,						&HtCapIe,
-							1,						&HtLen,
-							HtLen,					&HtCapabilityTmp,
-							END_OF_ARGS);
-#endif
-		FrameLen = FrameLen + tmp;
-	}
-#endif // DOT11_N_SUPPORT //
-
-	RTMPCancelTimer(&pDLS->Timer, &TimerCancelled);
-	Timeout = DLS_TIMEOUT;
-	RTMPSetTimer(&pDLS->Timer, Timeout);
-
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID PeerDlsReqAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-	PUCHAR			pOutBuffer = NULL;
-	NDIS_STATUS		NStatus;
-	ULONG			FrameLen = 0;
-	USHORT			StatusCode = MLME_SUCCESS;
-	HEADER_802_11	DlsRspHdr;
-	UCHAR			Category = CATEGORY_DLS;
-	UCHAR			Action = ACTION_DLS_RESPONSE;
-	ULONG			tmp;
-	USHORT			CapabilityInfo;
-	UCHAR			DA[MAC_ADDR_LEN], SA[MAC_ADDR_LEN];
-	USHORT			DLSTimeOut;
-	SHORT			i;
-	ULONG			Timeout;
-	BOOLEAN			TimerCancelled;
-	PRT_802_11_DLS	pDLS = NULL;
-	UCHAR			MaxSupportedRateIn500Kbps = 0;
-    UCHAR			SupportedRatesLen;
-    UCHAR			SupportedRates[MAX_LEN_OF_SUPPORTED_RATES];
-	UCHAR			HtCapabilityLen;
-	HT_CAPABILITY_IE	HtCapability;
-
-	if (!PeerDlsReqSanity(pAd, Elem->Msg, Elem->MsgLen, DA, SA, &CapabilityInfo, &DLSTimeOut,
-							&SupportedRatesLen, &SupportedRates[0], &HtCapabilityLen, &HtCapability))
-		return;
-
-    // supported rates array may not be sorted. sort it and find the maximum rate
-    for (i = 0; i < SupportedRatesLen; i++)
-    {
-        if (MaxSupportedRateIn500Kbps < (SupportedRates[i] & 0x7f))
-            MaxSupportedRateIn500Kbps = SupportedRates[i] & 0x7f;
-    }
-
-	DBGPRINT(RT_DEBUG_TRACE,("DLS - PeerDlsReqAction() from %02x:%02x:%02x:%02x:%02x:%02x\n", SA[0], SA[1], SA[2], SA[3], SA[4], SA[5]));
-
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-	if (NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("DLS - PeerDlsReqAction() allocate memory failed \n"));
-		return;
-	}
-
-	if (!INFRA_ON(pAd))
-	{
-		StatusCode = MLME_REQUEST_DECLINED;
-	}
-	else if (!pAd->CommonCfg.bWmmCapable)
-	{
-		StatusCode = MLME_DEST_STA_IS_NOT_A_QSTA;
-	}
-	else if (!pAd->CommonCfg.bDLSCapable)
-	{
-		StatusCode = MLME_REQUEST_DECLINED;
-	}
-	else
-	{
-		// find table to update parameters
-		for (i = (MAX_NUM_OF_DLS_ENTRY-1); i >= 0; i--)
-		{
-			if (pAd->StaCfg.DLSEntry[i].Valid && MAC_ADDR_EQUAL(SA, pAd->StaCfg.DLSEntry[i].MacAddr))
-			{
-				if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-					pAd->StaCfg.DLSEntry[i].Status = DLS_WAIT_KEY;
-				else
-				{
-					RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-					pAd->StaCfg.DLSEntry[i].Status = DLS_FINISH;
-				}
-
-				pAd->StaCfg.DLSEntry[i].Sequence = 0;
-				pAd->StaCfg.DLSEntry[i].TimeOut = DLSTimeOut;
-				pAd->StaCfg.DLSEntry[i].CountDownTimer = DLSTimeOut;
-				if (HtCapabilityLen != 0)
-					pAd->StaCfg.DLSEntry[i].bHTCap = TRUE;
-				else
-					pAd->StaCfg.DLSEntry[i].bHTCap = FALSE;
-				pDLS = &pAd->StaCfg.DLSEntry[i];
-				break;
-			}
-		}
-
-		// can not find in table, create a new one
-		if (i < 0)
-		{
-			DBGPRINT(RT_DEBUG_TRACE,("DLS - PeerDlsReqAction() can not find same entry \n"));
-			for (i=(MAX_NUM_OF_DLS_ENTRY - 1); i >= MAX_NUM_OF_INIT_DLS_ENTRY; i--)
-			{
-				if (!pAd->StaCfg.DLSEntry[i].Valid)
-				{
-					MAC_TABLE_ENTRY *pEntry;
-					UCHAR MaxSupportedRate = RATE_11;
-
-					if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-					{
-						pAd->StaCfg.DLSEntry[i].Status = DLS_WAIT_KEY;
-					}
-					else
-					{
-						RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-						pAd->StaCfg.DLSEntry[i].Status = DLS_FINISH;
-					}
-
-					pAd->StaCfg.DLSEntry[i].Sequence = 0;
-					pAd->StaCfg.DLSEntry[i].Valid = TRUE;
-					pAd->StaCfg.DLSEntry[i].TimeOut = DLSTimeOut;
-					pAd->StaCfg.DLSEntry[i].CountDownTimer = DLSTimeOut;
-					NdisMoveMemory(pAd->StaCfg.DLSEntry[i].MacAddr, SA, MAC_ADDR_LEN);
-					if (HtCapabilityLen != 0)
-						pAd->StaCfg.DLSEntry[i].bHTCap = TRUE;
-					else
-						pAd->StaCfg.DLSEntry[i].bHTCap = FALSE;
-					pDLS = &pAd->StaCfg.DLSEntry[i];
-					pEntry = MacTableInsertDlsEntry(pAd, SA, i);
-
-					switch (MaxSupportedRateIn500Kbps)
-					{
-						case 108: MaxSupportedRate = RATE_54;   break;
-						case 96:  MaxSupportedRate = RATE_48;   break;
-						case 72:  MaxSupportedRate = RATE_36;   break;
-						case 48:  MaxSupportedRate = RATE_24;   break;
-						case 36:  MaxSupportedRate = RATE_18;   break;
-						case 24:  MaxSupportedRate = RATE_12;   break;
-						case 18:  MaxSupportedRate = RATE_9;    break;
-						case 12:  MaxSupportedRate = RATE_6;    break;
-						case 22:  MaxSupportedRate = RATE_11;   break;
-						case 11:  MaxSupportedRate = RATE_5_5;  break;
-						case 4:   MaxSupportedRate = RATE_2;    break;
-						case 2:   MaxSupportedRate = RATE_1;    break;
-						default:  MaxSupportedRate = RATE_11;   break;
-					}
-
-					pEntry->MaxSupportedRate = min(pAd->CommonCfg.MaxTxRate, MaxSupportedRate);
-
-					if (pEntry->MaxSupportedRate < RATE_FIRST_OFDM_RATE)
-					{
-						pEntry->MaxHTPhyMode.field.MODE = MODE_CCK;
-						pEntry->MaxHTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-						pEntry->MinHTPhyMode.field.MODE = MODE_CCK;
-						pEntry->MinHTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-						pEntry->HTPhyMode.field.MODE = MODE_CCK;
-						pEntry->HTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-					}
-					else
-					{
-						pEntry->MaxHTPhyMode.field.MODE = MODE_OFDM;
-						pEntry->MaxHTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-						pEntry->MinHTPhyMode.field.MODE = MODE_OFDM;
-						pEntry->MinHTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-						pEntry->HTPhyMode.field.MODE = MODE_OFDM;
-						pEntry->HTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-					}
-
-					pEntry->MaxHTPhyMode.field.BW = BW_20;
-					pEntry->MinHTPhyMode.field.BW = BW_20;
-
-#ifdef DOT11_N_SUPPORT
-					pEntry->HTCapability.MCSSet[0] = 0;
-					pEntry->HTCapability.MCSSet[1] = 0;
-
-					// If this Entry supports 802.11n, upgrade to HT rate.
-					if ((HtCapabilityLen != 0) && (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
-					{
-						UCHAR	j, bitmask; //k,bitmask;
-						CHAR    ii;
-
-						if ((HtCapability.HtCapInfo.GF) && (pAd->CommonCfg.DesiredHtPhy.GF))
-						{
-							pEntry->MaxHTPhyMode.field.MODE = MODE_HTGREENFIELD;
-						}
-						else
-						{
-							pEntry->MaxHTPhyMode.field.MODE = MODE_HTMIX;
-							pAd->MacTab.fAnyStationNonGF = TRUE;
-							pAd->CommonCfg.AddHTInfo.AddHtInfo2.NonGfPresent = 1;
-						}
-
-						if ((HtCapability.HtCapInfo.ChannelWidth) && (pAd->CommonCfg.DesiredHtPhy.ChannelWidth))
-						{
-							pEntry->MaxHTPhyMode.field.BW= BW_40;
-							pEntry->MaxHTPhyMode.field.ShortGI = ((pAd->CommonCfg.DesiredHtPhy.ShortGIfor40)&(HtCapability.HtCapInfo.ShortGIfor40));
-						}
-						else
-						{
-							pEntry->MaxHTPhyMode.field.BW = BW_20;
-							pEntry->MaxHTPhyMode.field.ShortGI = ((pAd->CommonCfg.DesiredHtPhy.ShortGIfor20)&(HtCapability.HtCapInfo.ShortGIfor20));
-							pAd->MacTab.fAnyStation20Only = TRUE;
-						}
-
-						// find max fixed rate
-						for (ii=15; ii>=0; ii--)
-						{
-							j = ii/8;
-							bitmask = (1<<(ii-(j*8)));
-							if ( (pAd->StaCfg.DesiredHtPhyInfo.MCSSet[j]&bitmask) && (HtCapability.MCSSet[j]&bitmask))
-							{
-								pEntry->MaxHTPhyMode.field.MCS = ii;
-								break;
-							}
-							if (ii==0)
-								break;
-						}
-
-
-						if (pAd->StaCfg.DesiredTransmitSetting.field.MCS != MCS_AUTO)
-						{
-
-							printk("@@@ pAd->CommonCfg.RegTransmitSetting.field.MCS = %d\n",
-								pAd->StaCfg.DesiredTransmitSetting.field.MCS);
-							if (pAd->StaCfg.DesiredTransmitSetting.field.MCS == 32)
-							{
-								// Fix MCS as HT Duplicated Mode
-								pEntry->MaxHTPhyMode.field.BW = 1;
-								pEntry->MaxHTPhyMode.field.MODE = MODE_HTMIX;
-								pEntry->MaxHTPhyMode.field.STBC = 0;
-								pEntry->MaxHTPhyMode.field.ShortGI = 0;
-								pEntry->MaxHTPhyMode.field.MCS = 32;
-							}
-							else if (pEntry->MaxHTPhyMode.field.MCS > pAd->StaCfg.HTPhyMode.field.MCS)
-							{
-								// STA supports fixed MCS
-								pEntry->MaxHTPhyMode.field.MCS = pAd->StaCfg.HTPhyMode.field.MCS;
-							}
-						}
-
-						pEntry->MaxHTPhyMode.field.STBC = (HtCapability.HtCapInfo.RxSTBC & (pAd->CommonCfg.DesiredHtPhy.TxSTBC));
-						pEntry->MpduDensity = HtCapability.HtCapParm.MpduDensity;
-						pEntry->MaxRAmpduFactor = HtCapability.HtCapParm.MaxRAmpduFactor;
-						pEntry->MmpsMode = (UCHAR)HtCapability.HtCapInfo.MimoPs;
-						pEntry->AMsduSize = (UCHAR)HtCapability.HtCapInfo.AMsduSize;
-						pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word;
-
-						if (HtCapability.HtCapInfo.ShortGIfor20)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI20_CAPABLE);
-						if (HtCapability.HtCapInfo.ShortGIfor40)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI40_CAPABLE);
-						if (HtCapability.HtCapInfo.TxSTBC)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_TxSTBC_CAPABLE);
-						if (HtCapability.HtCapInfo.RxSTBC)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RxSTBC_CAPABLE);
-						if (HtCapability.ExtHtCapInfo.PlusHTC)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_HTC_CAPABLE);
-						if (pAd->CommonCfg.bRdg && HtCapability.ExtHtCapInfo.RDGSupport)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RDG_CAPABLE);
-						if (HtCapability.ExtHtCapInfo.MCSFeedback == 0x03)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_MCSFEEDBACK_CAPABLE);
-
-						NdisMoveMemory(&pEntry->HTCapability, &HtCapability, sizeof(HT_CAPABILITY_IE));
-					}
-#endif // DOT11_N_SUPPORT //
-
-					pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word;
-					pEntry->CurrTxRate = pEntry->MaxSupportedRate;
-					CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_WMM_CAPABLE);
-
-					if (pAd->StaCfg.bAutoTxRateSwitch == TRUE)
-					{
-						PUCHAR pTable;
-						UCHAR TableSize = 0;
-
-						MlmeSelectTxRateTable(pAd, pEntry, &pTable, &TableSize, &pEntry->CurrTxRateIndex);
-						pEntry->bAutoTxRateSwitch = TRUE;
-					}
-					else
-					{
-						pEntry->HTPhyMode.field.MODE	= pAd->StaCfg.HTPhyMode.field.MODE;
-						pEntry->HTPhyMode.field.MCS	= pAd->StaCfg.HTPhyMode.field.MCS;
-						pEntry->bAutoTxRateSwitch = FALSE;
-
-						RTMPUpdateLegacyTxSetting((UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode, pEntry);
-					}
-					pEntry->RateLen = SupportedRatesLen;
-
-					break;
-				}
-			}
-		}
-		StatusCode = MLME_SUCCESS;
-
-		// can not find in table, create a new one
-		if (i < 0)
-		{
-			StatusCode = MLME_QOS_UNSPECIFY;
-			DBGPRINT(RT_DEBUG_ERROR,("DLS - PeerDlsReqAction() DLSEntry table full(only can support %d DLS session) \n", MAX_NUM_OF_DLS_ENTRY - MAX_NUM_OF_INIT_DLS_ENTRY));
-		}
-		else
-		{
-			DBGPRINT(RT_DEBUG_TRACE,("DLS - PeerDlsReqAction() use entry(%d) %02x:%02x:%02x:%02x:%02x:%02x\n",
-				i, SA[0], SA[1], SA[2], SA[3], SA[4], SA[5]));
-		}
-	}
-
-	ActHeaderInit(pAd, &DlsRspHdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
-
-	// Build basic frame first
-	if (StatusCode == MLME_SUCCESS)
-	{
-		MakeOutgoingFrame(pOutBuffer,				&FrameLen,
-						sizeof(HEADER_802_11),		&DlsRspHdr,
-						1,							&Category,
-						1,							&Action,
-						2,							&StatusCode,
-						6,							SA,
-						6,							pAd->CurrentAddress,
-						2,							&pAd->StaActive.CapabilityInfo,
-						1,							&SupRateIe,
-						1,							&pAd->MlmeAux.SupRateLen,
-						pAd->MlmeAux.SupRateLen,	pAd->MlmeAux.SupRate,
-						END_OF_ARGS);
-
-		if (pAd->MlmeAux.ExtRateLen != 0)
-		{
-			MakeOutgoingFrame(pOutBuffer + FrameLen,	&tmp,
-							  1,						&ExtRateIe,
-							  1,						&pAd->MlmeAux.ExtRateLen,
-							  pAd->MlmeAux.ExtRateLen, 	pAd->MlmeAux.ExtRate,
-							  END_OF_ARGS);
-			FrameLen += tmp;
-		}
-
-#ifdef DOT11_N_SUPPORT
-		if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
-		{
-			UCHAR HtLen;
-
-#ifdef RT_BIG_ENDIAN
-			HT_CAPABILITY_IE HtCapabilityTmp;
-#endif
-
-			// add HT Capability IE
-			HtLen = sizeof(HT_CAPABILITY_IE);
-#ifndef RT_BIG_ENDIAN
-			MakeOutgoingFrame(pOutBuffer + FrameLen,	&tmp,
-								1,						&HtCapIe,
-								1,						&HtLen,
-								HtLen,					&pAd->CommonCfg.HtCapability,
-								END_OF_ARGS);
-#else
-			NdisMoveMemory(&HtCapabilityTmp, &pAd->CommonCfg.HtCapability, HtLen);
-								*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
-								*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
-
-			MakeOutgoingFrame(pOutBuffer + FrameLen,	&tmp,
-								1,						&HtCapIe,
-								1,						&HtLen,
-								HtLen,					&HtCapabilityTmp,
-								END_OF_ARGS);
-#endif
-			FrameLen = FrameLen + tmp;
-		}
-#endif // DOT11_N_SUPPORT //
-
-		if (pDLS && (pDLS->Status != DLS_FINISH))
-		{
-			RTMPCancelTimer(&pDLS->Timer, &TimerCancelled);
-			Timeout = DLS_TIMEOUT;
-			RTMPSetTimer(&pDLS->Timer, Timeout);
-		}
-	}
-	else
-	{
-		MakeOutgoingFrame(pOutBuffer,				&FrameLen,
-						sizeof(HEADER_802_11),		&DlsRspHdr,
-						1,							&Category,
-						1,							&Action,
-						2,							&StatusCode,
-						6,							SA,
-						6,							pAd->CurrentAddress,
-						END_OF_ARGS);
-	}
-
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID PeerDlsRspAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT		CapabilityInfo;
-	UCHAR		DA[MAC_ADDR_LEN], SA[MAC_ADDR_LEN];
-	USHORT		StatusCode;
-	SHORT		i;
-	BOOLEAN		TimerCancelled;
-	UCHAR		MaxSupportedRateIn500Kbps = 0;
-    UCHAR		SupportedRatesLen;
-    UCHAR		SupportedRates[MAX_LEN_OF_SUPPORTED_RATES];
-	UCHAR		HtCapabilityLen;
-	HT_CAPABILITY_IE	HtCapability;
-
-	if (!pAd->CommonCfg.bDLSCapable)
-		return;
-
-	if (!INFRA_ON(pAd))
-		return;
-
-	if (!PeerDlsRspSanity(pAd, Elem->Msg, Elem->MsgLen, DA, SA, &CapabilityInfo, &StatusCode,
-							&SupportedRatesLen, &SupportedRates[0], &HtCapabilityLen, &HtCapability))
-		return;
-
-    // supported rates array may not be sorted. sort it and find the maximum rate
-    for (i=0; i<SupportedRatesLen; i++)
-    {
-        if (MaxSupportedRateIn500Kbps < (SupportedRates[i] & 0x7f))
-            MaxSupportedRateIn500Kbps = SupportedRates[i] & 0x7f;
-    }
-
-	DBGPRINT(RT_DEBUG_TRACE,("DLS - PeerDlsRspAction() from %02x:%02x:%02x:%02x:%02x:%02x with StatusCode=%d, CapabilityInfo=0x%x\n",
-		SA[0], SA[1], SA[2], SA[3], SA[4], SA[5], StatusCode, CapabilityInfo));
-
-	for (i = 0; i < MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-	{
-		if (pAd->StaCfg.DLSEntry[i].Valid && MAC_ADDR_EQUAL(SA, pAd->StaCfg.DLSEntry[i].MacAddr))
-		{
-			if (StatusCode == MLME_SUCCESS)
-			{
-				MAC_TABLE_ENTRY *pEntry;
-				UCHAR MaxSupportedRate = RATE_11;
-
-				pEntry = MacTableInsertDlsEntry(pAd, SA, i);
-
-				switch (MaxSupportedRateIn500Kbps)
-				{
-					case 108: MaxSupportedRate = RATE_54;   break;
-					case 96:  MaxSupportedRate = RATE_48;   break;
-					case 72:  MaxSupportedRate = RATE_36;   break;
-					case 48:  MaxSupportedRate = RATE_24;   break;
-					case 36:  MaxSupportedRate = RATE_18;   break;
-					case 24:  MaxSupportedRate = RATE_12;   break;
-					case 18:  MaxSupportedRate = RATE_9;    break;
-					case 12:  MaxSupportedRate = RATE_6;    break;
-					case 22:  MaxSupportedRate = RATE_11;   break;
-					case 11:  MaxSupportedRate = RATE_5_5;  break;
-					case 4:   MaxSupportedRate = RATE_2;    break;
-					case 2:   MaxSupportedRate = RATE_1;    break;
-					default:  MaxSupportedRate = RATE_11;   break;
-				}
-
-				pEntry->MaxSupportedRate = min(pAd->CommonCfg.MaxTxRate, MaxSupportedRate);
-
-				if (pEntry->MaxSupportedRate < RATE_FIRST_OFDM_RATE)
-				{
-					pEntry->MaxHTPhyMode.field.MODE = MODE_CCK;
-					pEntry->MaxHTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-					pEntry->MinHTPhyMode.field.MODE = MODE_CCK;
-					pEntry->MinHTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-					pEntry->HTPhyMode.field.MODE = MODE_CCK;
-					pEntry->HTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-				}
-				else
-				{
-					pEntry->MaxHTPhyMode.field.MODE = MODE_OFDM;
-					pEntry->MaxHTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-					pEntry->MinHTPhyMode.field.MODE = MODE_OFDM;
-					pEntry->MinHTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-					pEntry->HTPhyMode.field.MODE = MODE_OFDM;
-					pEntry->HTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-				}
-
-				pEntry->MaxHTPhyMode.field.BW = BW_20;
-				pEntry->MinHTPhyMode.field.BW = BW_20;
-
-#ifdef DOT11_N_SUPPORT
-				pEntry->HTCapability.MCSSet[0] = 0;
-				pEntry->HTCapability.MCSSet[1] = 0;
-
-				// If this Entry supports 802.11n, upgrade to HT rate.
-				if ((HtCapabilityLen != 0) && (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
-				{
-					UCHAR	j, bitmask; //k,bitmask;
-					CHAR    ii;
-
-					if ((HtCapability.HtCapInfo.GF) && (pAd->CommonCfg.DesiredHtPhy.GF))
-					{
-						pEntry->MaxHTPhyMode.field.MODE = MODE_HTGREENFIELD;
-					}
-					else
-					{
-						pEntry->MaxHTPhyMode.field.MODE = MODE_HTMIX;
-						pAd->MacTab.fAnyStationNonGF = TRUE;
-						pAd->CommonCfg.AddHTInfo.AddHtInfo2.NonGfPresent = 1;
-					}
-
-					if ((HtCapability.HtCapInfo.ChannelWidth) && (pAd->CommonCfg.DesiredHtPhy.ChannelWidth))
-					{
-						pEntry->MaxHTPhyMode.field.BW= BW_40;
-						pEntry->MaxHTPhyMode.field.ShortGI = ((pAd->CommonCfg.DesiredHtPhy.ShortGIfor40)&(HtCapability.HtCapInfo.ShortGIfor40));
-					}
-					else
-					{
-						pEntry->MaxHTPhyMode.field.BW = BW_20;
-						pEntry->MaxHTPhyMode.field.ShortGI = ((pAd->CommonCfg.DesiredHtPhy.ShortGIfor20)&(HtCapability.HtCapInfo.ShortGIfor20));
-						pAd->MacTab.fAnyStation20Only = TRUE;
-					}
-
-					// find max fixed rate
-					for (ii=15; ii>=0; ii--)
-					{
-						j = ii/8;
-						bitmask = (1<<(ii-(j*8)));
-						if ( (pAd->StaCfg.DesiredHtPhyInfo.MCSSet[j]&bitmask) && (HtCapability.MCSSet[j]&bitmask))
-						{
-							pEntry->MaxHTPhyMode.field.MCS = ii;
-							break;
-						}
-						if (ii==0)
-							break;
-					}
-
-					if (pAd->StaCfg.DesiredTransmitSetting.field.MCS != MCS_AUTO)
-					{
-						if (pAd->StaCfg.DesiredTransmitSetting.field.MCS == 32)
-						{
-							// Fix MCS as HT Duplicated Mode
-							pEntry->MaxHTPhyMode.field.BW = 1;
-							pEntry->MaxHTPhyMode.field.MODE = MODE_HTMIX;
-							pEntry->MaxHTPhyMode.field.STBC = 0;
-							pEntry->MaxHTPhyMode.field.ShortGI = 0;
-							pEntry->MaxHTPhyMode.field.MCS = 32;
-						}
-						else if (pEntry->MaxHTPhyMode.field.MCS > pAd->StaCfg.HTPhyMode.field.MCS)
-						{
-							// STA supports fixed MCS
-							pEntry->MaxHTPhyMode.field.MCS = pAd->StaCfg.HTPhyMode.field.MCS;
-						}
-					}
-
-					pEntry->MaxHTPhyMode.field.STBC = (HtCapability.HtCapInfo.RxSTBC & (pAd->CommonCfg.DesiredHtPhy.TxSTBC));
-					pEntry->MpduDensity = HtCapability.HtCapParm.MpduDensity;
-					pEntry->MaxRAmpduFactor = HtCapability.HtCapParm.MaxRAmpduFactor;
-					pEntry->MmpsMode = (UCHAR)HtCapability.HtCapInfo.MimoPs;
-					pEntry->AMsduSize = (UCHAR)HtCapability.HtCapInfo.AMsduSize;
-					pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word;
-
-					if (HtCapability.HtCapInfo.ShortGIfor20)
-						CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI20_CAPABLE);
-					if (HtCapability.HtCapInfo.ShortGIfor40)
-						CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI40_CAPABLE);
-					if (HtCapability.HtCapInfo.TxSTBC)
-						CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_TxSTBC_CAPABLE);
-					if (HtCapability.HtCapInfo.RxSTBC)
-						CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RxSTBC_CAPABLE);
-					if (HtCapability.ExtHtCapInfo.PlusHTC)
-						CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_HTC_CAPABLE);
-					if (pAd->CommonCfg.bRdg && HtCapability.ExtHtCapInfo.RDGSupport)
-						CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RDG_CAPABLE);
-					if (HtCapability.ExtHtCapInfo.MCSFeedback == 0x03)
-						CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_MCSFEEDBACK_CAPABLE);
-
-					NdisMoveMemory(&pEntry->HTCapability, &HtCapability, sizeof(HT_CAPABILITY_IE));
-				}
-#endif // DOT11_N_SUPPORT //
-				pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word;
-				pEntry->CurrTxRate = pEntry->MaxSupportedRate;
-				CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_WMM_CAPABLE);
-
-				if (pAd->StaCfg.bAutoTxRateSwitch == TRUE)
-				{
-					PUCHAR pTable;
-					UCHAR TableSize = 0;
-
-					MlmeSelectTxRateTable(pAd, pEntry, &pTable, &TableSize, &pEntry->CurrTxRateIndex);
-					pEntry->bAutoTxRateSwitch = TRUE;
-				}
-				else
-				{
-					pEntry->HTPhyMode.field.MODE	= pAd->StaCfg.HTPhyMode.field.MODE;
-					pEntry->HTPhyMode.field.MCS	= pAd->StaCfg.HTPhyMode.field.MCS;
-					pEntry->bAutoTxRateSwitch = FALSE;
-
-					RTMPUpdateLegacyTxSetting((UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode, pEntry);
-				}
-				pEntry->RateLen = SupportedRatesLen;
-
-				if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-				{
-					// If support WPA or WPA2, start STAKey hand shake,
-					// If failed hand shake, just tear down peer DLS
-					if (RTMPSendSTAKeyRequest(pAd, pAd->StaCfg.DLSEntry[i].MacAddr) != NDIS_STATUS_SUCCESS)
-					{
-						MLME_DLS_REQ_STRUCT	MlmeDlsReq;
-						USHORT				reason = REASON_QOS_CIPHER_NOT_SUPPORT;
-
-						DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-						MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-						pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
-						pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-						DBGPRINT(RT_DEBUG_ERROR,("DLS - PeerDlsRspAction failed when call RTMPSendSTAKeyRequest \n"));
-					}
-					else
-					{
-						pAd->StaCfg.DLSEntry[i].Status = DLS_WAIT_KEY;
-						DBGPRINT(RT_DEBUG_TRACE,("DLS - waiting for STAKey handshake procedure\n"));
-					}
-				}
-				else
-				{
-					RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-					pAd->StaCfg.DLSEntry[i].Status = DLS_FINISH;
-					DBGPRINT(RT_DEBUG_TRACE,("DLS - PeerDlsRspAction() from %02x:%02x:%02x:%02x:%02x:%02x Succeed with WEP or no security\n", SA[0], SA[1], SA[2], SA[3], SA[4], SA[5]));
-				}
-
-				//initialize seq no for DLS frames.
-				pAd->StaCfg.DLSEntry[i].Sequence = 0;
-				if (HtCapabilityLen != 0)
-					pAd->StaCfg.DLSEntry[i].bHTCap = TRUE;
-				else
-					pAd->StaCfg.DLSEntry[i].bHTCap = FALSE;
-			}
-			else
-			{
-				// DLS setup procedure failed.
-				pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
-				pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-				RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-				DBGPRINT(RT_DEBUG_ERROR,("DLS - PeerDlsRspAction failed with StatusCode=%d \n", StatusCode));
-			}
-		}
-	}
-
-	if (i >= MAX_NUM_OF_INIT_DLS_ENTRY)
-	{
-		DBGPRINT(RT_DEBUG_TRACE,("DLS - PeerDlsRspAction() update timeout value \n"));
-		for (i=(MAX_NUM_OF_DLS_ENTRY-1); i>=MAX_NUM_OF_INIT_DLS_ENTRY; i--)
-		{
-			if (pAd->StaCfg.DLSEntry[i].Valid && MAC_ADDR_EQUAL(SA, pAd->StaCfg.DLSEntry[i].MacAddr))
-			{
-				if (StatusCode == MLME_SUCCESS)
-				{
-					MAC_TABLE_ENTRY *pEntry;
-					UCHAR MaxSupportedRate = RATE_11;
-
-					pEntry = MacTableInsertDlsEntry(pAd, SA, i);
-
-					switch (MaxSupportedRateIn500Kbps)
-					{
-						case 108: MaxSupportedRate = RATE_54;   break;
-						case 96:  MaxSupportedRate = RATE_48;   break;
-						case 72:  MaxSupportedRate = RATE_36;   break;
-						case 48:  MaxSupportedRate = RATE_24;   break;
-						case 36:  MaxSupportedRate = RATE_18;   break;
-						case 24:  MaxSupportedRate = RATE_12;   break;
-						case 18:  MaxSupportedRate = RATE_9;    break;
-						case 12:  MaxSupportedRate = RATE_6;    break;
-						case 22:  MaxSupportedRate = RATE_11;   break;
-						case 11:  MaxSupportedRate = RATE_5_5;  break;
-						case 4:   MaxSupportedRate = RATE_2;    break;
-						case 2:   MaxSupportedRate = RATE_1;    break;
-						default:  MaxSupportedRate = RATE_11;   break;
-					}
-
-					pEntry->MaxSupportedRate = min(pAd->CommonCfg.MaxTxRate, MaxSupportedRate);
-
-					if (pEntry->MaxSupportedRate < RATE_FIRST_OFDM_RATE)
-					{
-						pEntry->MaxHTPhyMode.field.MODE = MODE_CCK;
-						pEntry->MaxHTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-						pEntry->MinHTPhyMode.field.MODE = MODE_CCK;
-						pEntry->MinHTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-						pEntry->HTPhyMode.field.MODE = MODE_CCK;
-						pEntry->HTPhyMode.field.MCS = pEntry->MaxSupportedRate;
-					}
-					else
-					{
-						pEntry->MaxHTPhyMode.field.MODE = MODE_OFDM;
-						pEntry->MaxHTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-						pEntry->MinHTPhyMode.field.MODE = MODE_OFDM;
-						pEntry->MinHTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-						pEntry->HTPhyMode.field.MODE = MODE_OFDM;
-						pEntry->HTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
-					}
-
-					pEntry->MaxHTPhyMode.field.BW = BW_20;
-					pEntry->MinHTPhyMode.field.BW = BW_20;
-
-#ifdef DOT11_N_SUPPORT
-					pEntry->HTCapability.MCSSet[0] = 0;
-					pEntry->HTCapability.MCSSet[1] = 0;
-
-					// If this Entry supports 802.11n, upgrade to HT rate.
-					if ((HtCapabilityLen != 0) && (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
-					{
-						UCHAR	j, bitmask; //k,bitmask;
-						CHAR    ii;
-
-						if ((HtCapability.HtCapInfo.GF) && (pAd->CommonCfg.DesiredHtPhy.GF))
-						{
-							pEntry->MaxHTPhyMode.field.MODE = MODE_HTGREENFIELD;
-						}
-						else
-						{
-							pEntry->MaxHTPhyMode.field.MODE = MODE_HTMIX;
-							pAd->MacTab.fAnyStationNonGF = TRUE;
-							pAd->CommonCfg.AddHTInfo.AddHtInfo2.NonGfPresent = 1;
-						}
-
-						if ((HtCapability.HtCapInfo.ChannelWidth) && (pAd->CommonCfg.DesiredHtPhy.ChannelWidth))
-						{
-							pEntry->MaxHTPhyMode.field.BW= BW_40;
-							pEntry->MaxHTPhyMode.field.ShortGI = ((pAd->CommonCfg.DesiredHtPhy.ShortGIfor40)&(HtCapability.HtCapInfo.ShortGIfor40));
-						}
-						else
-						{
-							pEntry->MaxHTPhyMode.field.BW = BW_20;
-							pEntry->MaxHTPhyMode.field.ShortGI = ((pAd->CommonCfg.DesiredHtPhy.ShortGIfor20)&(HtCapability.HtCapInfo.ShortGIfor20));
-							pAd->MacTab.fAnyStation20Only = TRUE;
-						}
-
-						// find max fixed rate
-						for (ii=15; ii>=0; ii--)
-						{
-							j = ii/8;
-							bitmask = (1<<(ii-(j*8)));
-							if ( (pAd->StaCfg.DesiredHtPhyInfo.MCSSet[j]&bitmask) && (HtCapability.MCSSet[j]&bitmask))
-							{
-								pEntry->MaxHTPhyMode.field.MCS = ii;
-								break;
-							}
-							if (ii==0)
-								break;
-						}
-
-						if (pAd->StaCfg.DesiredTransmitSetting.field.MCS != MCS_AUTO)
-						{
-							printk("@@@ pAd->CommonCfg.RegTransmitSetting.field.MCS = %d\n",
-								pAd->StaCfg.DesiredTransmitSetting.field.MCS);
-							if (pAd->StaCfg.DesiredTransmitSetting.field.MCS == 32)
-							{
-								// Fix MCS as HT Duplicated Mode
-								pEntry->MaxHTPhyMode.field.BW = 1;
-								pEntry->MaxHTPhyMode.field.MODE = MODE_HTMIX;
-								pEntry->MaxHTPhyMode.field.STBC = 0;
-								pEntry->MaxHTPhyMode.field.ShortGI = 0;
-								pEntry->MaxHTPhyMode.field.MCS = 32;
-							}
-							else if (pEntry->MaxHTPhyMode.field.MCS > pAd->StaCfg.HTPhyMode.field.MCS)
-							{
-								// STA supports fixed MCS
-								pEntry->MaxHTPhyMode.field.MCS = pAd->StaCfg.HTPhyMode.field.MCS;
-							}
-						}
-
-						pEntry->MaxHTPhyMode.field.STBC = (HtCapability.HtCapInfo.RxSTBC & (pAd->CommonCfg.DesiredHtPhy.TxSTBC));
-						pEntry->MpduDensity = HtCapability.HtCapParm.MpduDensity;
-						pEntry->MaxRAmpduFactor = HtCapability.HtCapParm.MaxRAmpduFactor;
-						pEntry->MmpsMode = (UCHAR)HtCapability.HtCapInfo.MimoPs;
-						pEntry->AMsduSize = (UCHAR)HtCapability.HtCapInfo.AMsduSize;
-						pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word;
-
-						if (HtCapability.HtCapInfo.ShortGIfor20)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI20_CAPABLE);
-						if (HtCapability.HtCapInfo.ShortGIfor40)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI40_CAPABLE);
-						if (HtCapability.HtCapInfo.TxSTBC)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_TxSTBC_CAPABLE);
-						if (HtCapability.HtCapInfo.RxSTBC)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RxSTBC_CAPABLE);
-						if (HtCapability.ExtHtCapInfo.PlusHTC)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_HTC_CAPABLE);
-						if (pAd->CommonCfg.bRdg && HtCapability.ExtHtCapInfo.RDGSupport)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RDG_CAPABLE);
-						if (HtCapability.ExtHtCapInfo.MCSFeedback == 0x03)
-							CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_MCSFEEDBACK_CAPABLE);
-
-						NdisMoveMemory(&pEntry->HTCapability, &HtCapability, sizeof(HT_CAPABILITY_IE));
-					}
-#endif // DOT11_N_SUPPORT //
-
-					pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word;
-					pEntry->CurrTxRate = pEntry->MaxSupportedRate;
-					CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_WMM_CAPABLE);
-
-					if (pAd->StaCfg.bAutoTxRateSwitch == TRUE)
-					{
-						PUCHAR pTable;
-						UCHAR TableSize = 0;
-
-						MlmeSelectTxRateTable(pAd, pEntry, &pTable, &TableSize, &pEntry->CurrTxRateIndex);
-						pEntry->bAutoTxRateSwitch = TRUE;
-					}
-					else
-					{
-						pEntry->HTPhyMode.field.MODE	= pAd->StaCfg.HTPhyMode.field.MODE;
-						pEntry->HTPhyMode.field.MCS	= pAd->StaCfg.HTPhyMode.field.MCS;
-						pEntry->bAutoTxRateSwitch = FALSE;
-
-						RTMPUpdateLegacyTxSetting((UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode, pEntry);
-					}
-					pEntry->RateLen = SupportedRatesLen;
-
-					if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-					{
-						// If support WPA or WPA2, start STAKey hand shake,
-						// If failed hand shake, just tear down peer DLS
-						if (RTMPSendSTAKeyRequest(pAd, pAd->StaCfg.DLSEntry[i].MacAddr) != NDIS_STATUS_SUCCESS)
-						{
-							MLME_DLS_REQ_STRUCT	MlmeDlsReq;
-							USHORT				reason = REASON_QOS_CIPHER_NOT_SUPPORT;
-
-							DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-							MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-							pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
-							pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-							DBGPRINT(RT_DEBUG_ERROR,("DLS - PeerDlsRspAction failed when call RTMPSendSTAKeyRequest \n"));
-						}
-						else
-						{
-							pAd->StaCfg.DLSEntry[i].Status = DLS_WAIT_KEY;
-							DBGPRINT(RT_DEBUG_TRACE,("DLS - waiting for STAKey handshake procedure\n"));
-						}
-					}
-					else
-					{
-						RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-						pAd->StaCfg.DLSEntry[i].Status = DLS_FINISH;
-						DBGPRINT(RT_DEBUG_TRACE,("DLS - PeerDlsRspAction() from %02x:%02x:%02x:%02x:%02x:%02x Succeed with WEP or no security\n", SA[0], SA[1], SA[2], SA[3], SA[4], SA[5]));
-					}
-					pAd->StaCfg.DLSEntry[i].Sequence = 0;
-					if (HtCapabilityLen != 0)
-						pAd->StaCfg.DLSEntry[i].bHTCap = TRUE;
-					else
-						pAd->StaCfg.DLSEntry[i].bHTCap = FALSE;
-				}
-				else
-				{
-					// DLS setup procedure failed.
-					pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
-					pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-					RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-					DBGPRINT(RT_DEBUG_ERROR,("DLS - PeerDlsRspAction failed with StatusCode=%d \n", StatusCode));
-				}
-			}
-		}
-	}
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID MlmeDlsTearDownAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-	PUCHAR			pOutBuffer = NULL;
-	NDIS_STATUS		NStatus;
-	ULONG			FrameLen = 0;
-	UCHAR			Category = CATEGORY_DLS;
-	UCHAR			Action = ACTION_DLS_TEARDOWN;
-	USHORT			ReasonCode = REASON_QOS_UNSPECIFY;
-	HEADER_802_11	DlsTearDownHdr;
-	PRT_802_11_DLS	pDLS;
-	BOOLEAN			TimerCancelled;
-	UCHAR			i;
-
-	if(!MlmeDlsReqSanity(pAd, Elem->Msg, Elem->MsgLen, &pDLS, &ReasonCode))
-		return;
-
-	DBGPRINT(RT_DEBUG_TRACE,("DLS - MlmeDlsTearDownAction() with ReasonCode=%d \n", ReasonCode));
-
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-	if (NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("DLS - MlmeDlsTearDownAction() allocate memory failed \n"));
-		return;
-	}
-
-	ActHeaderInit(pAd, &DlsTearDownHdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
-
-	// Build basic frame first
-	MakeOutgoingFrame(pOutBuffer,				&FrameLen,
-					sizeof(HEADER_802_11),		&DlsTearDownHdr,
-					1,							&Category,
-					1,							&Action,
-					6,							&pDLS->MacAddr,
-					6,							pAd->CurrentAddress,
-					2,							&ReasonCode,
-					END_OF_ARGS);
-
-	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-	RTMPCancelTimer(&pDLS->Timer, &TimerCancelled);
-
-	// Remove key in local dls table entry
-	for (i = 0; i < MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-	{
-		if (MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
-		{
-			MacTableDeleteDlsEntry(pAd, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID, pAd->StaCfg.DLSEntry[i].MacAddr);
-		}
-	}
-
-	// clear peer dls table entry
-	for (i = MAX_NUM_OF_INIT_DLS_ENTRY; i < MAX_NUM_OF_DLS_ENTRY; i++)
-	{
-		if (MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
-		{
-			pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-			pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-			RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-			MacTableDeleteDlsEntry(pAd, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID, pAd->StaCfg.DLSEntry[i].MacAddr);
-		}
-	}
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID PeerDlsTearDownAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR			DA[MAC_ADDR_LEN], SA[MAC_ADDR_LEN];
-	USHORT			ReasonCode;
-	UINT			i;
-	BOOLEAN			TimerCancelled;
-
-	if (!pAd->CommonCfg.bDLSCapable)
-		return;
-
-	if (!INFRA_ON(pAd))
-		return;
-
-	if (!PeerDlsTearDownSanity(pAd, Elem->Msg, Elem->MsgLen, DA, SA, &ReasonCode))
-		return;
-
-	DBGPRINT(RT_DEBUG_TRACE,("DLS - PeerDlsTearDownAction() from %02x:%02x:%02x:%02x:%02x:%02x with ReasonCode=%d\n", SA[0], SA[1], SA[2], SA[3], SA[4], SA[5], ReasonCode));
-
-	// clear local dls table entry
-	for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-	{
-		if (pAd->StaCfg.DLSEntry[i].Valid && MAC_ADDR_EQUAL(SA, pAd->StaCfg.DLSEntry[i].MacAddr))
-		{
-			pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-			pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-			RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-			//AsicDelWcidTab(pAd, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID);
-			//AsicRemovePairwiseKeyEntry(pAd, BSS0, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID);
-			MacTableDeleteDlsEntry(pAd, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID, pAd->StaCfg.DLSEntry[i].MacAddr);
-		}
-	}
-
-	// clear peer dls table entry
-	for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
-	{
-		if (pAd->StaCfg.DLSEntry[i].Valid && MAC_ADDR_EQUAL(SA, pAd->StaCfg.DLSEntry[i].MacAddr))
-		{
-			pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-			pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-			RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-			//AsicDelWcidTab(pAd, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID);
-			//AsicRemovePairwiseKeyEntry(pAd, BSS0, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID);
-			MacTableDeleteDlsEntry(pAd, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID, pAd->StaCfg.DLSEntry[i].MacAddr);
-		}
-	}
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID RTMPCheckDLSTimeOut(
-	IN PRTMP_ADAPTER	pAd)
-{
-	ULONG				i;
-	MLME_DLS_REQ_STRUCT	MlmeDlsReq;
-	USHORT				reason = REASON_QOS_UNSPECIFY;
-
-	if (! pAd->CommonCfg.bDLSCapable)
-		return;
-
-	if (! INFRA_ON(pAd))
-		return;
-
-	// If timeout value is equaled to zero, it means always not be timeout.
-
-	// update local dls table entry
-	for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-	{
-		if ((pAd->StaCfg.DLSEntry[i].Valid) && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH)
-			&& (pAd->StaCfg.DLSEntry[i].TimeOut != 0))
-		{
-			pAd->StaCfg.DLSEntry[i].CountDownTimer --;
-
-			if (pAd->StaCfg.DLSEntry[i].CountDownTimer == 0)
-			{
-				reason = REASON_QOS_REQUEST_TIMEOUT;
-				pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-				pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-				DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-				MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-			}
-		}
-	}
-
-	// update peer dls table entry
-	for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
-	{
-		if ((pAd->StaCfg.DLSEntry[i].Valid) && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH)
-			&& (pAd->StaCfg.DLSEntry[i].TimeOut != 0))
-		{
-			pAd->StaCfg.DLSEntry[i].CountDownTimer --;
-
-			if (pAd->StaCfg.DLSEntry[i].CountDownTimer == 0)
-			{
-				reason = REASON_QOS_REQUEST_TIMEOUT;
-				pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-				pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-				DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-				MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-			}
-		}
-	}
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-BOOLEAN RTMPRcvFrameDLSCheck(
-	IN PRTMP_ADAPTER	pAd,
-	IN PHEADER_802_11	pHeader,
-	IN ULONG			Len,
-	IN PRT28XX_RXD_STRUC	pRxD)
-{
-	ULONG			i;
-	BOOLEAN			bFindEntry = FALSE;
-	BOOLEAN			bSTAKeyFrame = FALSE;
-	PEAPOL_PACKET	pEap;
-	PUCHAR			pProto, pAddr = NULL;
-	PUCHAR			pSTAKey = NULL;
-	UCHAR			ZeroReplay[LEN_KEY_DESC_REPLAY];
-	UCHAR			Mic[16], OldMic[16];
-	UCHAR			digest[80];
-	UCHAR			DlsPTK[80];
-	UCHAR			temp[64];
-	BOOLEAN			TimerCancelled;
-	CIPHER_KEY		PairwiseKey;
-
-
-	if (! pAd->CommonCfg.bDLSCapable)
-		return bSTAKeyFrame;
-
-	if (! INFRA_ON(pAd))
-		return bSTAKeyFrame;
-
-	if (! (pHeader->FC.SubType & 0x08))
-		return bSTAKeyFrame;
-
-	if (Len < LENGTH_802_11 + 6 + 2 + 2)
-		return bSTAKeyFrame;
-
-	pProto	= (PUCHAR)pHeader + LENGTH_802_11 + 2 + 6;	// QOS Control field , 0xAA 0xAA 0xAA 0x00 0x00 0x00
-	pAddr	= pHeader->Addr2;
-
-	// L2PAD bit on will pad 2 bytes at LLC
-	if (pRxD->L2PAD)
-	{
-		pProto += 2;
-	}
-
-	if (RTMPEqualMemory(EAPOL, pProto, 2) && (pAd->StaCfg.AuthMode >=  Ndis802_11AuthModeWPA))
-	{
-		pEap = (PEAPOL_PACKET) (pProto + 2);
-
-		DBGPRINT(RT_DEBUG_TRACE,("DLS - Sniff Len=%ld, DataLen=%d, KeyMic=%d, Install=%d, KeyAck=%d, Secure=%d, EKD_DL=%d, Error=%d, Request=%d\n", Len,
-			                                                             (LENGTH_802_11 + 6 + 2 + 2 + sizeof(EAPOL_PACKET) - MAX_LEN_OF_RSNIE + 16),
-			                                                             pEap->KeyDesc.KeyInfo.KeyMic,
-			                                                             pEap->KeyDesc.KeyInfo.Install,
-			                                                             pEap->KeyDesc.KeyInfo.KeyAck,
-			                                                             pEap->KeyDesc.KeyInfo.Secure,
-			                                                             pEap->KeyDesc.KeyInfo.EKD_DL,
-			                                                             pEap->KeyDesc.KeyInfo.Error,
-			                                                             pEap->KeyDesc.KeyInfo.Request));
-
-		if ((Len >= (LENGTH_802_11 + 6 + 2 + 2 + sizeof(EAPOL_PACKET) - MAX_LEN_OF_RSNIE + 16)) && pEap->KeyDesc.KeyInfo.KeyMic
-			&& pEap->KeyDesc.KeyInfo.Install && pEap->KeyDesc.KeyInfo.KeyAck && pEap->KeyDesc.KeyInfo.Secure
-			&& pEap->KeyDesc.KeyInfo.EKD_DL && !pEap->KeyDesc.KeyInfo.Error && !pEap->KeyDesc.KeyInfo.Request)
-		{
-			// First validate replay counter, only accept message with larger replay counter
-			// Let equal pass, some AP start with all zero replay counter
-			NdisZeroMemory(ZeroReplay, LEN_KEY_DESC_REPLAY);
-			if ((RTMPCompareMemory(pEap->KeyDesc.ReplayCounter, pAd->StaCfg.ReplayCounter, LEN_KEY_DESC_REPLAY) != 1) &&
-				(RTMPCompareMemory(pEap->KeyDesc.ReplayCounter, ZeroReplay, LEN_KEY_DESC_REPLAY) != 0))
-				return bSTAKeyFrame;
-
-			//RTMPMoveMemory(pAd->StaCfg.ReplayCounter, pEap->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-			RTMPMoveMemory(pAd->StaCfg.DlsReplayCounter, pEap->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-			DBGPRINT(RT_DEBUG_TRACE,("DLS - Sniff replay counter (%02x-%02x-%02x-%02x-%02x-%02x-%02x-%02x) Len=%ld, KeyDataLen=%d\n",
-				pAd->StaCfg.ReplayCounter[0], pAd->StaCfg.ReplayCounter[1], pAd->StaCfg.ReplayCounter[2],
-				pAd->StaCfg.ReplayCounter[3], pAd->StaCfg.ReplayCounter[4],	pAd->StaCfg.ReplayCounter[5],
-				pAd->StaCfg.ReplayCounter[6], pAd->StaCfg.ReplayCounter[7], Len, pEap->KeyDesc.KeyData[1]));
-
-			// put these code segment to get the replay counter
-			if (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED)
-				return bSTAKeyFrame;
-
-			// Check MIC value
-			// Save the MIC and replace with zero
-			// use proprietary PTK
-			NdisZeroMemory(temp, 64);
-			NdisMoveMemory(temp, "IEEE802.11 WIRELESS ACCESS POINT", 32);
-			WpaCountPTK(pAd, temp, temp, pAd->CommonCfg.Bssid, temp, pAd->CurrentAddress, DlsPTK, LEN_PTK);
-
-			NdisMoveMemory(OldMic, pEap->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
-			NdisZeroMemory(pEap->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
-			if (pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled)
-			{
-				// AES
-				HMAC_SHA1((PUCHAR) pEap, pEap->Body_Len[1] + 4, DlsPTK, LEN_EAP_MICK, digest);
-				NdisMoveMemory(Mic,	digest,	LEN_KEY_DESC_MIC);
-			}
-			else
-			{
-				hmac_md5(DlsPTK, LEN_EAP_MICK, (PUCHAR) pEap, pEap->Body_Len[1] + 4, Mic);
-			}
-
-			if (!NdisEqualMemory(OldMic, Mic, LEN_KEY_DESC_MIC))
-			{
-				DBGPRINT(RT_DEBUG_ERROR, ("MIC Different in Msg1 of STAKey handshake! \n"));
-				return bSTAKeyFrame;
-			}
-			else
-				DBGPRINT(RT_DEBUG_TRACE, ("MIC VALID in Msg1 of STAKey handshake! \n"));
-#if 1
-			if ((pEap->KeyDesc.KeyData[0] == 0xDD) && (pEap->KeyDesc.KeyData[2] == 0x00) && (pEap->KeyDesc.KeyData[3] == 0x0C)
-				&& (pEap->KeyDesc.KeyData[4] == 0x43) && (pEap->KeyDesc.KeyData[5] == 0x02))
-			{
-				pAddr			= pEap->KeyDesc.KeyData + 8;		// Tpe(1), Len(1), OUI(3), DataType(1), Reserved(2)
-				pSTAKey			= pEap->KeyDesc.KeyData + 14;	// Tpe(1), Len(1), OUI(3), DataType(1), Reserved(2), STAKey_Mac_Addr(6)
-
-				DBGPRINT(RT_DEBUG_TRACE,("DLS - Receive STAKey Message-1 from %02x:%02x:%02x:%02x:%02x:%02x Len=%ld, KeyDataLen=%d\n",
-					pAddr[0], pAddr[1], pAddr[2], pAddr[3], pAddr[4], pAddr[5], Len, pEap->KeyDesc.KeyData[1]));
-
-				bSTAKeyFrame = TRUE;
-			}
-#else
-			if ((pEap->KeyDesc.KeyData[0] == 0xDD) && (pEap->KeyDesc.KeyData[2] == 0x00) && (pEap->KeyDesc.KeyData[3] == 0x0F)
-				&& (pEap->KeyDesc.KeyData[4] == 0xAC) && (pEap->KeyDesc.KeyData[5] == 0x02))
-			{
-				pAddr			= pEap->KeyDesc.KeyData + 8;		// Tpe(1), Len(1), OUI(3), DataType(1), Reserved(2)
-				pSTAKey			= pEap->KeyDesc.KeyData + 14;	// Tpe(1), Len(1), OUI(3), DataType(1), Reserved(2), STAKey_Mac_Addr(6)
-
-				DBGPRINT(RT_DEBUG_TRACE,("DLS - Receive STAKey Message-1 from %02x:%02x:%02x:%02x:%02x:%02x Len=%d, KeyDataLen=%d\n",
-					pAddr[0], pAddr[1], pAddr[2], pAddr[3], pAddr[4], pAddr[5], Len, pEap->KeyDesc.KeyData[1]));
-
-				bSTAKeyFrame = TRUE;
-			}
-#endif
-
-		}
-		else if (Len >= (LENGTH_802_11 + 6 + 2 + 2 + sizeof(EAPOL_PACKET) - MAX_LEN_OF_RSNIE))
-		{
-			RTMPMoveMemory(pAd->StaCfg.DlsReplayCounter, pEap->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-			DBGPRINT(RT_DEBUG_TRACE,("DLS - Sniff replay counter 2(%02x-%02x-%02x-%02x-%02x-%02x-%02x-%02x) Len=%ld, KeyDataLen=%d\n",
-				pAd->StaCfg.ReplayCounter[0], pAd->StaCfg.ReplayCounter[1], pAd->StaCfg.ReplayCounter[2],
-				pAd->StaCfg.ReplayCounter[3], pAd->StaCfg.ReplayCounter[4],	pAd->StaCfg.ReplayCounter[5],
-				pAd->StaCfg.ReplayCounter[6], pAd->StaCfg.ReplayCounter[7], Len, pEap->KeyDesc.KeyData[1]));
-
-		}
-	}
-
-	// If timeout value is equaled to zero, it means always not be timeout.
-	// update local dls table entry
-	for (i= 0; i < MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-	{
-		if (pAd->StaCfg.DLSEntry[i].Valid && MAC_ADDR_EQUAL(pAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
-		{
-			if (bSTAKeyFrame)
-			{
-				PMAC_TABLE_ENTRY pEntry;
-
-				// STAKey frame, add pairwise key table
-				pAd->StaCfg.DLSEntry[i].Status = DLS_FINISH;
-				RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-
-				PairwiseKey.KeyLen = LEN_TKIP_EK;
-				NdisMoveMemory(PairwiseKey.Key, &pSTAKey[0], LEN_TKIP_EK);
-				NdisMoveMemory(PairwiseKey.TxMic, &pSTAKey[16], LEN_TKIP_RXMICK);
-				NdisMoveMemory(PairwiseKey.RxMic, &pSTAKey[24], LEN_TKIP_TXMICK);
-
-				PairwiseKey.CipherAlg = pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg;
-
-				pEntry = DlsEntryTableLookup(pAd, pAd->StaCfg.DLSEntry[i].MacAddr, TRUE);
-				//AsicAddKeyEntry(pAd, (USHORT)(i + 2), BSS0, 0, &PairwiseKey, TRUE, TRUE);	// reserve 0 for multicast, 1 for unicast
-				//AsicUpdateRxWCIDTable(pAd, (USHORT)(i + 2), pAddr);
-				// Add Pair-wise key to Asic
-#ifdef RT2870
-//Benson modified for USB interface, avoid in interrupt when write key, 20080724 -->
-                                {
-                                        RT_ADD_PAIRWISE_KEY_ENTRY KeyInfo;
-                                        COPY_MAC_ADDR(KeyInfo.MacAddr,pAd->StaCfg.DLSEntry[i].MacAddr);
-                                        KeyInfo.MacTabMatchWCID=pAd->StaCfg.DLSEntry[i].MacTabMatchWCID;
-                                        NdisMoveMemory(&KeyInfo.CipherKey,  &PairwiseKey,sizeof(CIPHER_KEY));
-                                        RTUSBEnqueueInternalCmd(pAd, RT_CMD_SET_KEY_TABLE, &KeyInfo, sizeof(RT_ADD_PAIRWISE_KEY_ENTRY));
-                                }
-                                {
-                                        PMAC_TABLE_ENTRY pDLSEntry;
-                                        pDLSEntry = DlsEntryTableLookup(pAd, pAd->StaCfg.DLSEntry[i].MacAddr, TRUE);
-                                        pDLSEntry->PairwiseKey.CipherAlg=PairwiseKey.CipherAlg;
-                                        RTUSBEnqueueInternalCmd(pAd, RT_CMD_SET_RX_WCID_TABLE, pDLSEntry, sizeof(MAC_TABLE_ENTRY));
-                                }
-//Benson modified for USB interface, avoid in interrupt when write key, 20080724 <--
-#endif // RT2870 //
-				NdisMoveMemory(&pEntry->PairwiseKey, &PairwiseKey, sizeof(CIPHER_KEY));
-				DBGPRINT(RT_DEBUG_TRACE,("DLS - Receive STAKey Message-1 (Peer STA MAC Address STAKey) \n"));
-
-				RTMPSendSTAKeyHandShake(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
-
-				DBGPRINT(RT_DEBUG_TRACE,("DLS - Finish STAKey handshake procedure (Initiator side)\n"));
-			}
-			else
-			{
-				// Data frame, update timeout value
-				if (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH)
-				{
-					pAd->StaCfg.DLSEntry[i].CountDownTimer = pAd->StaCfg.DLSEntry[i].TimeOut;
-					//AsicUpdateRxWCIDTable(pAd, (USHORT)(i + 2), pAddr);
-				}
-			}
-
-			bFindEntry = TRUE;
-		}
-	}
-
-	// update peer dls table entry
-	for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
-	{
-		if (pAd->StaCfg.DLSEntry[i].Valid && MAC_ADDR_EQUAL(pAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
-		{
-			if (bSTAKeyFrame)
-			{
-				PMAC_TABLE_ENTRY pEntry = NULL;
-
-				// STAKey frame, add pairwise key table, and send STAkey Msg-2
-				pAd->StaCfg.DLSEntry[i].Status = DLS_FINISH;
-				RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &TimerCancelled);
-
-				PairwiseKey.KeyLen = LEN_TKIP_EK;
-				NdisMoveMemory(PairwiseKey.Key, &pSTAKey[0], LEN_TKIP_EK);
-				NdisMoveMemory(PairwiseKey.TxMic, &pSTAKey[16], LEN_TKIP_RXMICK);
-				NdisMoveMemory(PairwiseKey.RxMic, &pSTAKey[24], LEN_TKIP_TXMICK);
-
-				PairwiseKey.CipherAlg = pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg;
-
-				pEntry = DlsEntryTableLookup(pAd, pAd->StaCfg.DLSEntry[i].MacAddr, TRUE);
-				//AsicAddKeyEntry(pAd, (USHORT)(i + 2), BSS0, 0, &PairwiseKey, TRUE, TRUE);	// reserve 0 for multicast, 1 for unicast
-				//AsicUpdateRxWCIDTable(pAd, (USHORT)(i + 2), pAddr);
-				// Add Pair-wise key to Asic
-#ifdef RT2870
-//Benson modified for USB interface, avoid in interrupt when write key, 20080724 -->
-                                {
-                                        RT_ADD_PAIRWISE_KEY_ENTRY KeyInfo;
-                                        COPY_MAC_ADDR(KeyInfo.MacAddr,pAd->StaCfg.DLSEntry[i].MacAddr);
-                                        KeyInfo.MacTabMatchWCID=pAd->StaCfg.DLSEntry[i].MacTabMatchWCID;
-                                        NdisMoveMemory(&KeyInfo.CipherKey,  &PairwiseKey,sizeof(CIPHER_KEY));
-                                        RTUSBEnqueueInternalCmd(pAd, RT_CMD_SET_KEY_TABLE, &KeyInfo, sizeof(RT_ADD_PAIRWISE_KEY_ENTRY));
-                                }
-                                {
-                                        PMAC_TABLE_ENTRY pDLSEntry;
-                                        pDLSEntry = DlsEntryTableLookup(pAd, pAd->StaCfg.DLSEntry[i].MacAddr, TRUE);
-                                        pDLSEntry->PairwiseKey.CipherAlg=PairwiseKey.CipherAlg;
-                                        RTUSBEnqueueInternalCmd(pAd, RT_CMD_SET_RX_WCID_TABLE, pDLSEntry, sizeof(MAC_TABLE_ENTRY));
-                                }
-//Benson modified for USB interface, avoid in interrupt when write key, 20080724 <--
-#endif // RT2870 //
-				NdisMoveMemory(&pEntry->PairwiseKey, &PairwiseKey, sizeof(CIPHER_KEY));
-				DBGPRINT(RT_DEBUG_TRACE,("DLS - Receive STAKey Message-1 (Initiator STA MAC Address STAKey)\n"));
-
-				// If support WPA or WPA2, start STAKey hand shake,
-				// If failed hand shake, just tear down peer DLS
-				if (RTMPSendSTAKeyHandShake(pAd, pAddr) != NDIS_STATUS_SUCCESS)
-				{
-					MLME_DLS_REQ_STRUCT	MlmeDlsReq;
-					USHORT				reason = REASON_QOS_CIPHER_NOT_SUPPORT;
-
-					pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
-					pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-					DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
-					MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-				}
-				else
-				{
-					DBGPRINT(RT_DEBUG_TRACE,("DLS - Finish STAKey handshake procedure (Peer side)\n"));
-				}
-			}
-			else
-			{
-				// Data frame, update timeout value
-				if (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH)
-				{
-					pAd->StaCfg.DLSEntry[i].CountDownTimer = pAd->StaCfg.DLSEntry[i].TimeOut;
-				}
-			}
-
-			bFindEntry = TRUE;
-		}
-	}
-
-
-	return bSTAKeyFrame;
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Check if the frame can be sent through DLS direct link interface
-
-	Arguments:
-		pAd		Pointer	to adapter
-
-	Return Value:
-		DLS entry index
-
-	Note:
-
-	========================================================================
-*/
-INT	RTMPCheckDLSFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN  PUCHAR          pDA)
-{
-	INT rval = -1;
-	INT	i;
-
-	if (!pAd->CommonCfg.bDLSCapable)
-		return rval;
-
-	if (!INFRA_ON(pAd))
-		return rval;
-
-	do{
-		// check local dls table entry
-		for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-		{
-			if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH) &&
-				MAC_ADDR_EQUAL(pDA, pAd->StaCfg.DLSEntry[i].MacAddr))
-			{
-				rval = i;
-				break;
-			}
-		}
-
-		// check peer dls table entry
-		for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
-		{
-			if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH) &&
-				MAC_ADDR_EQUAL(pDA, pAd->StaCfg.DLSEntry[i].MacAddr))
-			{
-				rval = i;
-				break;
-			}
-		}
-	} while (FALSE);
-
-	return rval;
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-VOID RTMPSendDLSTearDownFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN  PUCHAR          pDA)
-{
-	PUCHAR			pOutBuffer = NULL;
-	NDIS_STATUS		NStatus;
-	HEADER_802_11	DlsTearDownHdr;
-	ULONG			FrameLen = 0;
-	USHORT			Reason = REASON_QOS_QSTA_LEAVING_QBSS;
-	UCHAR			Category = CATEGORY_DLS;
-	UCHAR			Action = ACTION_DLS_TEARDOWN;
-	UCHAR			i = 0;
-
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS) ||
-		RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS))
-		return;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Send DLS TearDown Frame \n"));
-
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-	if (NStatus != NDIS_STATUS_SUCCESS)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("ASSOC - RTMPSendDLSTearDownFrame() allocate memory failed \n"));
-		return;
-	}
-
-	ActHeaderInit(pAd, &DlsTearDownHdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
-	MakeOutgoingFrame(pOutBuffer,				&FrameLen,
-					sizeof(HEADER_802_11),		&DlsTearDownHdr,
-					1,							&Category,
-					1,							&Action,
-					6,							pDA,
-					6,							pAd->CurrentAddress,
-					2,							&Reason,
-					END_OF_ARGS);
-
-	MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-	// Remove key in local dls table entry
-	for (i = 0; i < MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-	{
-		if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH)
-			&& MAC_ADDR_EQUAL(pDA, pAd->StaCfg.DLSEntry[i].MacAddr))
-		{
-			MacTableDeleteDlsEntry(pAd, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID, pAd->StaCfg.DLSEntry[i].MacAddr);
-		}
-	}
-
-	// Remove key in peer dls table entry
-	for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
-	{
-		if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH)
-			&& MAC_ADDR_EQUAL(pDA, pAd->StaCfg.DLSEntry[i].MacAddr))
-		{
-			MacTableDeleteDlsEntry(pAd, pAd->StaCfg.DLSEntry[i].MacTabMatchWCID, pAd->StaCfg.DLSEntry[i].MacAddr);
-		}
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Send DLS TearDown Frame and remove key in (i=%d) \n", i));
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-NDIS_STATUS RTMPSendSTAKeyRequest(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pDA)
-{
-	UCHAR				Header802_3[14];
-	NDIS_STATUS			NStatus;
-	ULONG				FrameLen = 0;
-	EAPOL_PACKET		Packet;
-	UCHAR				Mic[16];
-	UCHAR				digest[80];
-	PUCHAR				pOutBuffer = NULL;
-	PNDIS_PACKET		pNdisPacket;
-	UCHAR				temp[64];
-	UCHAR				DlsPTK[80];
-
-	DBGPRINT(RT_DEBUG_TRACE,("DLS - RTMPSendSTAKeyRequest() to %02x:%02x:%02x:%02x:%02x:%02x\n", pDA[0], pDA[1], pDA[2], pDA[3], pDA[4], pDA[5]));
-
-	pAd->Sequence ++;
-	MAKE_802_3_HEADER(Header802_3, pAd->CommonCfg.Bssid, pAd->CurrentAddress, EAPOL);
-
-	// Zero message body
-	NdisZeroMemory(&Packet, sizeof(Packet));
-	Packet.ProVer = EAPOL_VER;
-	Packet.ProType    = EAPOLKey;
-	Packet.Body_Len[1]  = sizeof(KEY_DESCRIPTER) - MAX_LEN_OF_RSNIE + 6 + MAC_ADDR_LEN;		// data field contain KDE andPeer MAC address
-
-	// STAKey Message is as EAPOL-Key(1,1,0,0,G/0,0,0, MIC, 0,Peer MAC KDE)
-	if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK))
-    {
-        Packet.KeyDesc.Type = WPA1_KEY_DESC;
-    }
-    else if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK))
-    {
-        Packet.KeyDesc.Type = WPA2_KEY_DESC;
-    }
-
-	// Key descriptor version
-	Packet.KeyDesc.KeyInfo.KeyDescVer =
-		(((pAd->StaCfg.PairCipher == Ndis802_11Encryption3Enabled) || (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled)) ? (DESC_TYPE_AES) : (DESC_TYPE_TKIP));
-
-	Packet.KeyDesc.KeyInfo.KeyMic	= 1;
-	Packet.KeyDesc.KeyInfo.Secure	= 1;
-	Packet.KeyDesc.KeyInfo.Request	= 1;
-
-	Packet.KeyDesc.KeyDataLen[1]	= 12;
-
-	// use our own OUI to distinguish proprietary with standard.
-	Packet.KeyDesc.KeyData[0]		= 0xDD;
-	Packet.KeyDesc.KeyData[1]		= 0x0A;
-	Packet.KeyDesc.KeyData[2]		= 0x00;
-	Packet.KeyDesc.KeyData[3]		= 0x0C;
-	Packet.KeyDesc.KeyData[4]		= 0x43;
-	Packet.KeyDesc.KeyData[5]		= 0x03;
-	NdisMoveMemory(&Packet.KeyDesc.KeyData[6], pDA, MAC_ADDR_LEN);
-
-	NdisMoveMemory(Packet.KeyDesc.ReplayCounter, pAd->StaCfg.DlsReplayCounter, LEN_KEY_DESC_REPLAY);
-
-	// Allocate buffer for transmitting message
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);
-	if (NStatus	!= NDIS_STATUS_SUCCESS)
-		return NStatus;
-
-	// Prepare EAPOL frame for MIC calculation
-	// Be careful, only EAPOL frame is counted for MIC calculation
-	MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-		              Packet.Body_Len[1] + 4,    &Packet,
-		              END_OF_ARGS);
-
-	// use proprietary PTK
-	NdisZeroMemory(temp, 64);
-	NdisMoveMemory(temp, "IEEE802.11 WIRELESS ACCESS POINT", 32);
-	WpaCountPTK(pAd, temp, temp, pAd->CommonCfg.Bssid, temp, pAd->CurrentAddress, DlsPTK, LEN_PTK);
-
-	// calculate MIC
-	if (pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled)
-	{
-		// AES
-		NdisZeroMemory(digest,	sizeof(digest));
-		HMAC_SHA1(pOutBuffer, FrameLen, DlsPTK, LEN_EAP_MICK, digest);
-		NdisMoveMemory(Packet.KeyDesc.KeyMic, digest, LEN_KEY_DESC_MIC);
-	}
-	else
-	{
-		NdisZeroMemory(Mic,	sizeof(Mic));
-		hmac_md5(DlsPTK, LEN_EAP_MICK, pOutBuffer, FrameLen, Mic);
-		NdisMoveMemory(Packet.KeyDesc.KeyMic, Mic, LEN_KEY_DESC_MIC);
-	}
-
-	MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-	                  sizeof(Header802_3),	Header802_3,
-		              Packet.Body_Len[1] + 4,	&Packet,
-		              END_OF_ARGS);
-
-	NStatus = RTMPAllocateNdisPacket(pAd, &pNdisPacket, NULL, 0, pOutBuffer, FrameLen);
-	if (NStatus == NDIS_STATUS_SUCCESS)
-	{
-		RTMP_SET_PACKET_WCID(pNdisPacket, BSSID_WCID);
-		STASendPacket(pAd, pNdisPacket);
-		RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS);
-	}
-
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("RTMPSendSTAKeyRequest- Send STAKey request (NStatus=%x, FrameLen=%ld)\n", NStatus, FrameLen));
-
-	return NStatus;
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-NDIS_STATUS RTMPSendSTAKeyHandShake(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pDA)
-{
-	UCHAR				Header802_3[14];
-	NDIS_STATUS			NStatus;
-	ULONG				FrameLen = 0;
-	EAPOL_PACKET		Packet;
-	UCHAR				Mic[16];
-	UCHAR				digest[80];
-	PUCHAR				pOutBuffer = NULL;
-	PNDIS_PACKET		pNdisPacket;
-	UCHAR				temp[64];
-	UCHAR				DlsPTK[80];			// Due to dirver can not get PTK, use proprietary PTK
-
-	DBGPRINT(RT_DEBUG_TRACE,("DLS - RTMPSendSTAKeyHandShake() to %02x:%02x:%02x:%02x:%02x:%02x\n", pDA[0], pDA[1], pDA[2], pDA[3], pDA[4], pDA[5]));
-
-	pAd->Sequence ++;
-	MAKE_802_3_HEADER(Header802_3, pAd->CommonCfg.Bssid, pAd->CurrentAddress, EAPOL);
-
-	// Zero message body
-	NdisZeroMemory(&Packet, sizeof(Packet));
-	Packet.ProVer = EAPOL_VER;
-	Packet.ProType    = EAPOLKey;
-	Packet.Body_Len[1]  = sizeof(KEY_DESCRIPTER) - MAX_LEN_OF_RSNIE + 6 + MAC_ADDR_LEN;		// data field contain KDE and Peer MAC address
-
-	// STAKey Message is as EAPOL-Key(1,1,0,0,G/0,0,0, MIC, 0,Peer MAC KDE)
-	if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK))
-    {
-        Packet.KeyDesc.Type = WPA1_KEY_DESC;
-    }
-    else if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK))
-    {
-        Packet.KeyDesc.Type = WPA2_KEY_DESC;
-    }
-
-	// Key descriptor version
-	Packet.KeyDesc.KeyInfo.KeyDescVer =
-		(((pAd->StaCfg.PairCipher == Ndis802_11Encryption3Enabled) || (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled)) ? (DESC_TYPE_AES) : (DESC_TYPE_TKIP));
-
-	Packet.KeyDesc.KeyInfo.KeyMic	= 1;
-	Packet.KeyDesc.KeyInfo.Secure	= 1;
-
-	Packet.KeyDesc.KeyDataLen[1]	= 12;
-
-	// use our own OUI to distinguish proprietary with standard.
-	Packet.KeyDesc.KeyData[0]		= 0xDD;
-	Packet.KeyDesc.KeyData[1]		= 0x0A;
-	Packet.KeyDesc.KeyData[2]		= 0x00;
-	Packet.KeyDesc.KeyData[3]		= 0x0C;
-	Packet.KeyDesc.KeyData[4]		= 0x43;
-	Packet.KeyDesc.KeyData[5]		= 0x03;
-	NdisMoveMemory(&Packet.KeyDesc.KeyData[6], pDA, MAC_ADDR_LEN);
-
-	NdisMoveMemory(Packet.KeyDesc.ReplayCounter, pAd->StaCfg.DlsReplayCounter, LEN_KEY_DESC_REPLAY);
-
-	// Allocate buffer for transmitting message
-	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);
-	if (NStatus	!= NDIS_STATUS_SUCCESS)
-		return NStatus;
-
-	// Prepare EAPOL frame for MIC calculation
-	// Be careful, only EAPOL frame is counted for MIC calculation
-	MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-		              Packet.Body_Len[1] + 4,    &Packet,
-		              END_OF_ARGS);
-
-	// use proprietary PTK
-	NdisZeroMemory(temp, 64);
-	NdisMoveMemory(temp, "IEEE802.11 WIRELESS ACCESS POINT", 32);
-	WpaCountPTK(pAd, temp, temp, pAd->CommonCfg.Bssid, temp, pAd->CurrentAddress, DlsPTK, LEN_PTK);
-
-	// calculate MIC
-	if (pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled)
-	{
-		// AES
-		NdisZeroMemory(digest,	sizeof(digest));
-		HMAC_SHA1(pOutBuffer, FrameLen, DlsPTK, LEN_EAP_MICK, digest);
-		NdisMoveMemory(Packet.KeyDesc.KeyMic, digest, LEN_KEY_DESC_MIC);
-	}
-	else
-	{
-		NdisZeroMemory(Mic,	sizeof(Mic));
-		hmac_md5(DlsPTK, LEN_EAP_MICK, pOutBuffer, FrameLen, Mic);
-		NdisMoveMemory(Packet.KeyDesc.KeyMic, Mic, LEN_KEY_DESC_MIC);
-	}
-
-	MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-	                  sizeof(Header802_3),	Header802_3,
-		              Packet.Body_Len[1] + 4,	&Packet,
-		              END_OF_ARGS);
-
-	NStatus = RTMPAllocateNdisPacket(pAd, &pNdisPacket, NULL, 0, pOutBuffer, FrameLen);
-	if (NStatus == NDIS_STATUS_SUCCESS)
-	{
-		RTMP_SET_PACKET_WCID(pNdisPacket, BSSID_WCID);
-		STASendPacket(pAd, pNdisPacket);
-		RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS);
-	}
-
-	MlmeFreeMemory(pAd, pOutBuffer);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("RTMPSendSTAKeyHandShake- Send STAKey Message-2 (NStatus=%x, FrameLen=%ld)\n", NStatus, FrameLen));
-
-	return NStatus;
-}
-
-VOID DlsTimeoutAction(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3)
-{
-	MLME_DLS_REQ_STRUCT		MlmeDlsReq;
-	USHORT					reason;
-	PRT_802_11_DLS			pDLS = (PRT_802_11_DLS)FunctionContext;
-	PRTMP_ADAPTER			pAd = pDLS->pAd;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("DlsTimeout - Tear down DLS links (%02x:%02x:%02x:%02x:%02x:%02x)\n",
-		pDLS->MacAddr[0], pDLS->MacAddr[1], pDLS->MacAddr[2], pDLS->MacAddr[3], pDLS->MacAddr[4], pDLS->MacAddr[5]));
-
-	if ((pDLS) && (pDLS->Valid))
-	{
-		reason			= REASON_QOS_REQUEST_TIMEOUT;
-		pDLS->Valid		= FALSE;
-		pDLS->Status	= DLS_NONE;
-		DlsParmFill(pAd, &MlmeDlsReq, pDLS, reason);
-		MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
-		RT28XX_MLME_HANDLER(pAd);
-	}
-}
-
-/*
-================================================================
-Description : because DLS and CLI share the same WCID table in ASIC.
-Mesh entry also insert to pAd->MacTab.content[].  Such is marked as ValidAsDls = TRUE.
-Also fills the pairwise key.
-Because front MAX_AID_BA entries have direct mapping to BAEntry, which is only used as CLI. So we insert Dls
-from index MAX_AID_BA.
-================================================================
-*/
-MAC_TABLE_ENTRY *MacTableInsertDlsEntry(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR	pAddr,
-	IN  UINT	DlsEntryIdx)
-{
-	PMAC_TABLE_ENTRY pEntry = NULL;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("====> MacTableInsertDlsEntry\n"));
-	// if FULL, return
-	if (pAd->MacTab.Size >= MAX_LEN_OF_MAC_TABLE)
-		return NULL;
-
-	do
-	{
-		if((pEntry = DlsEntryTableLookup(pAd, pAddr, TRUE)) != NULL)
-			break;
-
-		// allocate one MAC entry
-		pEntry = MacTableInsertEntry(pAd, pAddr, DlsEntryIdx + MIN_NET_DEVICE_FOR_DLS, TRUE);
-		if (pEntry)
-		{
-			pAd->StaCfg.DLSEntry[DlsEntryIdx].MacTabMatchWCID = pEntry->Aid;
-			pEntry->MatchDlsEntryIdx = DlsEntryIdx;
-			pEntry->AuthMode = pAd->StaCfg.AuthMode;
-			pEntry->WepStatus = pAd->StaCfg.WepStatus;
-
-			DBGPRINT(RT_DEBUG_TRACE, ("MacTableInsertDlsEntry - allocate entry #%d, Total= %d\n",pEntry->Aid, pAd->MacTab.Size));
-
-			// If legacy WEP is used, set pair-wise cipherAlg into WCID attribute table for this entry
-			if ((pEntry->ValidAsDls) && (pEntry->WepStatus == Ndis802_11WEPEnabled))
-			{
-				UCHAR KeyIdx = 0;
-				UCHAR CipherAlg = 0;
-
-				KeyIdx	= pAd->StaCfg.DefaultKeyId;
-
-				CipherAlg 	= pAd->SharedKey[BSS0][KeyIdx].CipherAlg;
-
-				RTMPAddWcidAttributeEntry(pAd,
-											BSS0,
-											pAd->StaCfg.DefaultKeyId,
-											pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg,
-											pEntry);
-			}
-
-			break;
-		}
-	} while(FALSE);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<==== MacTableInsertDlsEntry\n"));
-
-	return pEntry;
-}
-
-
-/*
-	==========================================================================
-	Description:
-		Delete all Mesh Entry in pAd->MacTab
-	==========================================================================
- */
-BOOLEAN MacTableDeleteDlsEntry(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT wcid,
-	IN PUCHAR pAddr)
-{
-	DBGPRINT(RT_DEBUG_TRACE, ("====> MacTableDeleteDlsEntry\n"));
-
-	if (!VALID_WCID(wcid))
-		return FALSE;
-
-	MacTableDeleteEntry(pAd, wcid, pAddr);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<==== MacTableDeleteDlsEntry\n"));
-
-	return TRUE;
-}
-
-MAC_TABLE_ENTRY *DlsEntryTableLookup(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR	pAddr,
-	IN BOOLEAN	bResetIdelCount)
-{
-	ULONG HashIdx;
-	MAC_TABLE_ENTRY *pEntry = NULL;
-
-	RTMP_SEM_LOCK(&pAd->MacTabLock);
-	HashIdx = MAC_ADDR_HASH_INDEX(pAddr);
-	pEntry = pAd->MacTab.Hash[HashIdx];
-
-	while (pEntry)
-	{
-		if ((pEntry->ValidAsDls == TRUE)
-			&& MAC_ADDR_EQUAL(pEntry->Addr, pAddr))
-		{
-			if(bResetIdelCount)
-				pEntry->NoDataIdleCount = 0;
-			break;
-		}
-		else
-			pEntry = pEntry->pNext;
-	}
-
-	RTMP_SEM_UNLOCK(&pAd->MacTabLock);
-	return pEntry;
-}
-
-MAC_TABLE_ENTRY *DlsEntryTableLookupByWcid(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR	wcid,
-	IN PUCHAR	pAddr,
-	IN BOOLEAN	bResetIdelCount)
-{
-	ULONG DLsIndex;
-	PMAC_TABLE_ENTRY pCurEntry = NULL;
-	PMAC_TABLE_ENTRY pEntry = NULL;
-
-	if (!VALID_WCID(wcid))
-		return NULL;
-
-	RTMP_SEM_LOCK(&pAd->MacTabLock);
-
-	do
-	{
-		pCurEntry = &pAd->MacTab.Content[wcid];
-
-		DLsIndex = 0xff;
-		if ((pCurEntry) && (pCurEntry->ValidAsDls== TRUE))
-		{
-			DLsIndex = pCurEntry->MatchDlsEntryIdx;
-		}
-
-		if (DLsIndex == 0xff)
-			break;
-
-		if (MAC_ADDR_EQUAL(pCurEntry->Addr, pAddr))
-		{
-			if(bResetIdelCount)
-				pCurEntry->NoDataIdleCount = 0;
-			pEntry = pCurEntry;
-			break;
-		}
-	} while(FALSE);
-
-	RTMP_SEM_UNLOCK(&pAd->MacTabLock);
-
-	return pEntry;
-}
-
-INT Set_DlsEntryInfo_Display_Proc(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR arg)
-{
-	INT i;
-
-	printk("\n%-19s%-8s\n", "MAC", "TIMEOUT\n");
-	for (i=0; i<MAX_NUM_OF_DLS_ENTRY; i++)
-	{
-		if ((pAd->StaCfg.DLSEntry[i].Valid) && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
-		{
-			printk("%02x:%02x:%02x:%02x:%02x:%02x  ",
-				pAd->StaCfg.DLSEntry[i].MacAddr[0], pAd->StaCfg.DLSEntry[i].MacAddr[1], pAd->StaCfg.DLSEntry[i].MacAddr[2],
-				pAd->StaCfg.DLSEntry[i].MacAddr[3], pAd->StaCfg.DLSEntry[i].MacAddr[4], pAd->StaCfg.DLSEntry[i].MacAddr[5]);
-			printk("%-8d\n", pAd->StaCfg.DLSEntry[i].TimeOut);
-		}
-	}
-
-	return TRUE;
-}
-
-INT	Set_DlsAddEntry_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-    UCHAR	mac[MAC_ADDR_LEN];
-	USHORT	Timeout;
-	char *token, sepValue[] = ":", DASH = '-';
-	INT i;
-    RT_802_11_DLS	Dls;
-
-    if(strlen(arg) < 19)  //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and timeout value in decimal format.
-		return FALSE;
-
-	token = strchr(arg, DASH);
-	if ((token != NULL) && (strlen(token)>1))
-	{
-		Timeout = simple_strtol((token+1), 0, 10);
-
-		*token = '\0';
-		for (i = 0, token = rstrtok(arg, &sepValue[0]); token; token = rstrtok(NULL, &sepValue[0]), i++)
-		{
-			if((strlen(token) != 2) || (!isxdigit(*token)) || (!isxdigit(*(token+1))))
-				return FALSE;
-			AtoH(token, (PUCHAR)(&mac[i]), 1);
-		}
-		if(i != 6)
-			return FALSE;
-
-	    printk("\n%02x:%02x:%02x:%02x:%02x:%02x-%d", mac[0], mac[1],
-	           mac[2], mac[3], mac[4], mac[5], (int)Timeout);
-
-		NdisZeroMemory(&Dls, sizeof(RT_802_11_DLS));
-		Dls.TimeOut = Timeout;
-		COPY_MAC_ADDR(Dls.MacAddr, mac);
-		Dls.Valid = 1;
-
-		MlmeEnqueue(pAd,
-					MLME_CNTL_STATE_MACHINE,
-					RT_OID_802_11_SET_DLS_PARAM,
-					sizeof(RT_802_11_DLS),
-					&Dls);
-
-		return TRUE;
-	}
-
-	return FALSE;
-
-}
-
-INT	Set_DlsTearDownEntry_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	UCHAR			macAddr[MAC_ADDR_LEN];
-	CHAR			*value;
-	INT				i;
-	RT_802_11_DLS	Dls;
-
-	if(strlen(arg) != 17)  //Mac address acceptable format 01:02:03:04:05:06 length 17
-		return FALSE;
-
-	for (i=0, value = rstrtok(arg,":"); value; value = rstrtok(NULL,":"))
-	{
-		if((strlen(value) != 2) || (!isxdigit(*value)) || (!isxdigit(*(value+1))) )
-			return FALSE;  //Invalid
-
-		AtoH(value, &macAddr[i++], 2);
-	}
-
-	printk("\n%02x:%02x:%02x:%02x:%02x:%02x", macAddr[0], macAddr[1],
-	           macAddr[2], macAddr[3], macAddr[4], macAddr[5]);
-
-	NdisZeroMemory(&Dls, sizeof(RT_802_11_DLS));
-	COPY_MAC_ADDR(Dls.MacAddr, macAddr);
-	Dls.Valid = 0;
-
-	MlmeEnqueue(pAd,
-				MLME_CNTL_STATE_MACHINE,
-				RT_OID_802_11_SET_DLS_PARAM,
-				sizeof(RT_802_11_DLS),
-				&Dls);
-
-	return TRUE;
-}
-
diff --git a/drivers/staging/rt3070/sta/rtmp_data.c b/drivers/staging/rt3070/sta/rtmp_data.c
index b0f259b35c7..bf091206f5c 100644
--- a/drivers/staging/rt3070/sta/rtmp_data.c
+++ b/drivers/staging/rt3070/sta/rtmp_data.c
@@ -1,2637 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	rtmp_data.c
-
-	Abstract:
-	Data path subroutines
-
-	Revision History:
-	Who 		When			What
-	--------	----------		----------------------------------------------
-	John		      Aug/17/04		major modification for RT2561/2661
-	Jan Lee	      Mar/17/06		major modification for RT2860 New Ring Design
-*/
-#include "../rt_config.h"
-
-
-
-VOID STARxEAPOLFrameIndicate(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MAC_TABLE_ENTRY	*pEntry,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID)
-{
-	PRT28XX_RXD_STRUC	pRxD = &(pRxBlk->RxD);
-	PRXWI_STRUC		pRxWI = pRxBlk->pRxWI;
-	UCHAR			*pTmpBuf;
-
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-	if (pAd->StaCfg.WpaSupplicantUP)
-	{
-		// All EAPoL frames have to pass to upper layer (ex. WPA_SUPPLICANT daemon)
-		// TBD : process fragmented EAPol frames
-		{
-			// In 802.1x mode, if the received frame is EAP-SUCCESS packet, turn on the PortSecured variable
-			if ( pAd->StaCfg.IEEE8021X == TRUE &&
-				 (EAP_CODE_SUCCESS == WpaCheckEapCode(pAd, pRxBlk->pData, pRxBlk->DataSize, LENGTH_802_1_H)))
-			{
-				PUCHAR	Key;
-				UCHAR 	CipherAlg;
-				int     idx = 0;
-
-				DBGPRINT_RAW(RT_DEBUG_TRACE, ("Receive EAP-SUCCESS Packet\n"));
-				//pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-				STA_PORT_SECURED(pAd);
-
-                if (pAd->StaCfg.IEEE8021x_required_keys == FALSE)
-                {
-                    idx = pAd->StaCfg.DesireSharedKeyId;
-                    CipherAlg = pAd->StaCfg.DesireSharedKey[idx].CipherAlg;
-					Key = pAd->StaCfg.DesireSharedKey[idx].Key;
-
-                    if (pAd->StaCfg.DesireSharedKey[idx].KeyLen > 0)
-    				{
-#ifdef RT2870
-						union
-						{
-							char buf[sizeof(NDIS_802_11_WEP)+MAX_LEN_OF_KEY- 1];
-							NDIS_802_11_WEP keyinfo;
-						}  WepKey;
-						int len;
-
-
-						NdisZeroMemory(&WepKey, sizeof(WepKey));
-						len =pAd->StaCfg.DesireSharedKey[idx].KeyLen;
-
-						NdisMoveMemory(WepKey.keyinfo.KeyMaterial,
-							pAd->StaCfg.DesireSharedKey[idx].Key,
-							pAd->StaCfg.DesireSharedKey[idx].KeyLen);
-
-						WepKey.keyinfo.KeyIndex = 0x80000000 + idx;
-						WepKey.keyinfo.KeyLength = len;
-						pAd->SharedKey[BSS0][idx].KeyLen =(UCHAR) (len <= 5 ? 5 : 13);
-
-						pAd->IndicateMediaState = NdisMediaStateConnected;
-						pAd->ExtraInfo = GENERAL_LINK_UP;
-						// need to enqueue cmd to thread
-						RTUSBEnqueueCmdFromNdis(pAd, OID_802_11_ADD_WEP, TRUE, &WepKey, sizeof(WepKey.keyinfo) + len - 1);
-#endif // RT2870 //
-						// For Preventing ShardKey Table is cleared by remove key procedure.
-    					pAd->SharedKey[BSS0][idx].CipherAlg = CipherAlg;
-						pAd->SharedKey[BSS0][idx].KeyLen = pAd->StaCfg.DesireSharedKey[idx].KeyLen;
-						NdisMoveMemory(pAd->SharedKey[BSS0][idx].Key,
-									   pAd->StaCfg.DesireSharedKey[idx].Key,
-									   pAd->StaCfg.DesireSharedKey[idx].KeyLen);
-    				}
-				}
-			}
-
-			Indicate_Legacy_Packet(pAd, pRxBlk, FromWhichBSSID);
-			return;
-		}
-	}
-	else
-#endif // WPA_SUPPLICANT_SUPPORT //
-	{
-		// Special DATA frame that has to pass to MLME
-		//	 1. Cisco Aironet frames for CCX2. We need pass it to MLME for special process
-		//	 2. EAPOL handshaking frames when driver supplicant enabled, pass to MLME for special process
-		{
-			pTmpBuf = pRxBlk->pData - LENGTH_802_11;
-			NdisMoveMemory(pTmpBuf, pRxBlk->pHeader, LENGTH_802_11);
-			REPORT_MGMT_FRAME_TO_MLME(pAd, pRxWI->WirelessCliID, pTmpBuf, pRxBlk->DataSize + LENGTH_802_11, pRxWI->RSSI0, pRxWI->RSSI1, pRxWI->RSSI2, pRxD->PlcpSignal);
-			DBGPRINT_RAW(RT_DEBUG_TRACE, ("!!! report EAPOL/AIRONET DATA to MLME (len=%d) !!!\n", pRxBlk->DataSize));
-		}
-	}
-
-	RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
-	return;
-
-}
-
-VOID STARxDataFrameAnnounce(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MAC_TABLE_ENTRY	*pEntry,
-	IN	RX_BLK			*pRxBlk,
-	IN	UCHAR			FromWhichBSSID)
-{
-
-	// non-EAP frame
-	if (!RTMPCheckWPAframe(pAd, pEntry, pRxBlk->pData, pRxBlk->DataSize, FromWhichBSSID))
-	{
-
-		{
-			// drop all non-EAP DATA frame before
-			// this client's Port-Access-Control is secured
-			if (pRxBlk->pHeader->FC.Wep)
-			{
-				// unsupported cipher suite
-				if (pAd->StaCfg.WepStatus == Ndis802_11EncryptionDisabled)
-				{
-					// release packet
-					RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
-					return;
-				}
-			}
-			else
-			{
-				// encryption in-use but receive a non-EAPOL clear text frame, drop it
-				if ((pAd->StaCfg.WepStatus != Ndis802_11EncryptionDisabled) &&
-					(pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
-				{
-					// release packet
-					RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
-					return;
-				}
-			}
-		}
-		RX_BLK_CLEAR_FLAG(pRxBlk, fRX_EAP);
-		if (!RX_BLK_TEST_FLAG(pRxBlk, fRX_ARALINK))
-		{
-			// Normal legacy, AMPDU or AMSDU
-			CmmRxnonRalinkFrameIndicate(pAd, pRxBlk, FromWhichBSSID);
-
-		}
-		else
-		{
-			// ARALINK
-			CmmRxRalinkFrameIndicate(pAd, pEntry, pRxBlk, FromWhichBSSID);
-		}
-#ifdef QOS_DLS_SUPPORT
-		RX_BLK_CLEAR_FLAG(pRxBlk, fRX_DLS);
-#endif // QOS_DLS_SUPPORT //
-	}
-	else
-	{
-		RX_BLK_SET_FLAG(pRxBlk, fRX_EAP);
-#ifdef DOT11_N_SUPPORT
-		if (RX_BLK_TEST_FLAG(pRxBlk, fRX_AMPDU) && (pAd->CommonCfg.bDisableReordering == 0))
-		{
-			Indicate_AMPDU_Packet(pAd, pRxBlk, FromWhichBSSID);
-		}
-		else
-#endif // DOT11_N_SUPPORT //
-		{
-			// Determin the destination of the EAP frame
-			//  to WPA state machine or upper layer
-			STARxEAPOLFrameIndicate(pAd, pEntry, pRxBlk, FromWhichBSSID);
-		}
-	}
-}
-
-
-// For TKIP frame, calculate the MIC value
-BOOLEAN STACheckTkipMICValue(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MAC_TABLE_ENTRY	*pEntry,
-	IN	RX_BLK			*pRxBlk)
-{
-	PHEADER_802_11	pHeader = pRxBlk->pHeader;
-	UCHAR			*pData = pRxBlk->pData;
-	USHORT			DataSize = pRxBlk->DataSize;
-	UCHAR			UserPriority = pRxBlk->UserPriority;
-	PCIPHER_KEY		pWpaKey;
-	UCHAR			*pDA, *pSA;
-
-	pWpaKey = &pAd->SharedKey[BSS0][pRxBlk->pRxWI->KeyIndex];
-
-	pDA = pHeader->Addr1;
-	if (RX_BLK_TEST_FLAG(pRxBlk, fRX_INFRA))
-	{
-		pSA = pHeader->Addr3;
-	}
-	else
-	{
-		pSA = pHeader->Addr2;
-	}
-
-	if (RTMPTkipCompareMICValue(pAd,
-								pData,
-								pDA,
-								pSA,
-								pWpaKey->RxMic,
-								UserPriority,
-								DataSize) == FALSE)
-	{
-		DBGPRINT_RAW(RT_DEBUG_ERROR,("Rx MIC Value error 2\n"));
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-		if (pAd->StaCfg.WpaSupplicantUP)
-		{
-			WpaSendMicFailureToWpaSupplicant(pAd, (pWpaKey->Type == PAIRWISEKEY) ? TRUE : FALSE);
-		}
-		else
-#endif // WPA_SUPPLICANT_SUPPORT //
-		{
-			RTMPReportMicError(pAd, pWpaKey);
-		}
-
-		// release packet
-		RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
-		return FALSE;
-	}
-
-	return TRUE;
-}
-
-
-//
-// All Rx routines use RX_BLK structure to hande rx events
-// It is very important to build pRxBlk attributes
-//  1. pHeader pointer to 802.11 Header
-//  2. pData pointer to payload including LLC (just skip Header)
-//  3. set payload size including LLC to DataSize
-//  4. set some flags with RX_BLK_SET_FLAG()
-//
-VOID STAHandleRxDataFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk)
-{
-	PRT28XX_RXD_STRUC				pRxD = &(pRxBlk->RxD);
-	PRXWI_STRUC						pRxWI = pRxBlk->pRxWI;
-	PHEADER_802_11					pHeader = pRxBlk->pHeader;
-	PNDIS_PACKET					pRxPacket = pRxBlk->pRxPacket;
-	BOOLEAN 						bFragment = FALSE;
-	MAC_TABLE_ENTRY	    			*pEntry = NULL;
-	UCHAR							FromWhichBSSID = BSS0;
-	UCHAR                           UserPriority = 0;
-
-	{
-		// before LINK UP, all DATA frames are rejected
-		if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
-		{
-			// release packet
-			RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
-			return;
-		}
-
-#ifdef QOS_DLS_SUPPORT
-		//if ((pHeader->FC.FrDs == 0) && (pHeader->FC.ToDs == 0))
-		if (RTMPRcvFrameDLSCheck(pAd, pHeader, pRxWI->MPDUtotalByteCount, pRxD))
-		{
-			return;
-		}
-#endif // QOS_DLS_SUPPORT //
-
-		// Drop not my BSS frames
-		if (pRxD->MyBss == 0)
-		{
-			{
-				// release packet
-				RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
-				return;
-			}
-		}
-
-		pAd->RalinkCounters.RxCountSinceLastNULL++;
-		if (pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable && (pHeader->FC.SubType & 0x08))
-		{
-			UCHAR *pData;
-			DBGPRINT(RT_DEBUG_TRACE,("bAPSDCapable\n"));
-
-			// Qos bit 4
-			pData = (PUCHAR)pHeader + LENGTH_802_11;
-			if ((*pData >> 4) & 0x01)
-			{
-				DBGPRINT(RT_DEBUG_TRACE,("RxDone- Rcv EOSP frame, driver may fall into sleep\n"));
-				pAd->CommonCfg.bInServicePeriod = FALSE;
-
-				// Force driver to fall into sleep mode when rcv EOSP frame
-				if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
-				{
-					USHORT  TbttNumToNextWakeUp;
-					USHORT  NextDtim = pAd->StaCfg.DtimPeriod;
-					ULONG   Now;
-
-					NdisGetSystemUpTime(&Now);
-					NextDtim -= (USHORT)(Now - pAd->StaCfg.LastBeaconRxTime)/pAd->CommonCfg.BeaconPeriod;
-
-					TbttNumToNextWakeUp = pAd->StaCfg.DefaultListenCount;
-					if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM) && (TbttNumToNextWakeUp > NextDtim))
-						TbttNumToNextWakeUp = NextDtim;
-
-					MlmeSetPsmBit(pAd, PWR_SAVE);
-					// if WMM-APSD is failed, try to disable following line
-					AsicSleepThenAutoWakeup(pAd, TbttNumToNextWakeUp);
-				}
-			}
-
-			if ((pHeader->FC.MoreData) && (pAd->CommonCfg.bInServicePeriod))
-			{
-				DBGPRINT(RT_DEBUG_TRACE,("Sending another trigger frame when More Data bit is set to 1\n"));
-			}
-		}
-
-		// Drop NULL, CF-ACK(no data), CF-POLL(no data), and CF-ACK+CF-POLL(no data) data frame
-		if ((pHeader->FC.SubType & 0x04)) // bit 2 : no DATA
-		{
-			// release packet
-			RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
-			return;
-		}
-
-	    // Drop not my BSS frame (we can not only check the MyBss bit in RxD)
-#ifdef QOS_DLS_SUPPORT
-	    if (!pAd->CommonCfg.bDLSCapable)
-	    {
-#endif // QOS_DLS_SUPPORT //
-		if (INFRA_ON(pAd))
-		{
-			// Infrastructure mode, check address 2 for BSSID
-			if (!RTMPEqualMemory(&pHeader->Addr2, &pAd->CommonCfg.Bssid, 6))
-			{
-				// Receive frame not my BSSID
-	            // release packet
-	            RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
-				return;
-			}
-		}
-		else	// Ad-Hoc mode or Not associated
-		{
-			// Ad-Hoc mode, check address 3 for BSSID
-			if (!RTMPEqualMemory(&pHeader->Addr3, &pAd->CommonCfg.Bssid, 6))
-			{
-				// Receive frame not my BSSID
-	            // release packet
-	            RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
-				return;
-			}
-		}
-#ifdef QOS_DLS_SUPPORT
-	    }
-#endif // QOS_DLS_SUPPORT //
-
-		//
-		// find pEntry
-		//
-		if (pRxWI->WirelessCliID < MAX_LEN_OF_MAC_TABLE)
-		{
-			pEntry = &pAd->MacTab.Content[pRxWI->WirelessCliID];
-		}
-		else
-		{
-			// 1. release packet if infra mode
-			// 2. new a pEntry if ad-hoc mode
-			RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
-			return;
-		}
-
-		// infra or ad-hoc
-		if (INFRA_ON(pAd))
-		{
-			RX_BLK_SET_FLAG(pRxBlk, fRX_INFRA);
-#ifdef QOS_DLS_SUPPORT
-			if ((pHeader->FC.FrDs == 0) && (pHeader->FC.ToDs == 0))
-				RX_BLK_SET_FLAG(pRxBlk, fRX_DLS);
-			else
-#endif // QOS_DLS_SUPPORT //
-			ASSERT(pRxWI->WirelessCliID == BSSID_WCID);
-		}
-
-		// check Atheros Client
-		if ((pEntry->bIAmBadAtheros == FALSE) &&  (pRxD->AMPDU == 1) && (pHeader->FC.Retry ))
-		{
-			pEntry->bIAmBadAtheros = TRUE;
-			pAd->CommonCfg.IOTestParm.bCurrentAtheros = TRUE;
-			pAd->CommonCfg.IOTestParm.bLastAtheros = TRUE;
-			if (!STA_AES_ON(pAd))
-			{
-				AsicUpdateProtect(pAd, 8, ALLN_SETPROTECT, TRUE, FALSE);
-			}
-		}
-	}
-
-	pRxBlk->pData = (UCHAR *)pHeader;
-
-	//
-	// update RxBlk->pData, DataSize
-	// 802.11 Header, QOS, HTC, Hw Padding
-	//
-
-	// 1. skip 802.11 HEADER
-	{
-		pRxBlk->pData += LENGTH_802_11;
-		pRxBlk->DataSize -= LENGTH_802_11;
-	}
-
-	// 2. QOS
-	if (pHeader->FC.SubType & 0x08)
-	{
-		RX_BLK_SET_FLAG(pRxBlk, fRX_QOS);
-		UserPriority = *(pRxBlk->pData) & 0x0f;
-		// bit 7 in QoS Control field signals the HT A-MSDU format
-		if ((*pRxBlk->pData) & 0x80)
-		{
-			RX_BLK_SET_FLAG(pRxBlk, fRX_AMSDU);
-		}
-
-		// skip QOS contorl field
-		pRxBlk->pData += 2;
-		pRxBlk->DataSize -=2;
-	}
-	pRxBlk->UserPriority = UserPriority;
-
-	// 3. Order bit: A-Ralink or HTC+
-	if (pHeader->FC.Order)
-	{
-#ifdef AGGREGATION_SUPPORT
-		if ((pRxWI->PHYMODE <= MODE_OFDM) && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED)))
-		{
-			RX_BLK_SET_FLAG(pRxBlk, fRX_ARALINK);
-		}
-		else
-#endif
-		{
-#ifdef DOT11_N_SUPPORT
-			RX_BLK_SET_FLAG(pRxBlk, fRX_HTC);
-			// skip HTC contorl field
-			pRxBlk->pData += 4;
-			pRxBlk->DataSize -= 4;
-#endif // DOT11_N_SUPPORT //
-		}
-	}
-
-	// 4. skip HW padding
-	if (pRxD->L2PAD)
-	{
-		// just move pData pointer
-		// because DataSize excluding HW padding
-		RX_BLK_SET_FLAG(pRxBlk, fRX_PAD);
-		pRxBlk->pData += 2;
-	}
-
-#ifdef DOT11_N_SUPPORT
-	if (pRxD->BA)
-	{
-		RX_BLK_SET_FLAG(pRxBlk, fRX_AMPDU);
-	}
-#endif // DOT11_N_SUPPORT //
-
-
-	//
-	// Case I  Process Broadcast & Multicast data frame
-	//
-	if (pRxD->Bcast || pRxD->Mcast)
-	{
-		INC_COUNTER64(pAd->WlanCounters.MulticastReceivedFrameCount);
-
-		// Drop Mcast/Bcast frame with fragment bit on
-		if (pHeader->FC.MoreFrag)
-		{
-			// release packet
-			RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
-			return;
-		}
-
-		// Filter out Bcast frame which AP relayed for us
-		if (pHeader->FC.FrDs && MAC_ADDR_EQUAL(pHeader->Addr3, pAd->CurrentAddress))
-		{
-			// release packet
-			RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
-			return;
-		}
-
-		Indicate_Legacy_Packet(pAd, pRxBlk, FromWhichBSSID);
-		return;
-	}
-	else if (pRxD->U2M)
-	{
-		pAd->LastRxRate = (USHORT)((pRxWI->MCS) + (pRxWI->BW <<7) + (pRxWI->ShortGI <<8)+ (pRxWI->PHYMODE <<14)) ;
-
-
-#ifdef QOS_DLS_SUPPORT
-        if (RX_BLK_TEST_FLAG(pRxBlk, fRX_DLS))
-		{
-			MAC_TABLE_ENTRY *pDlsEntry = NULL;
-
-			pDlsEntry = DlsEntryTableLookupByWcid(pAd, pRxWI->WirelessCliID, pHeader->Addr2, TRUE);
-										                        if(pDlsEntry)
-			Update_Rssi_Sample(pAd, &pDlsEntry->RssiSample, pRxWI);
-		}
-		else
-#endif // QOS_DLS_SUPPORT //
-		if (ADHOC_ON(pAd))
-		{
-			pEntry = MacTableLookup(pAd, pHeader->Addr2);
-			if (pEntry)
-				Update_Rssi_Sample(pAd, &pEntry->RssiSample, pRxWI);
-		}
-
-
-		Update_Rssi_Sample(pAd, &pAd->StaCfg.RssiSample, pRxWI);
-
-		pAd->StaCfg.LastSNR0 = (UCHAR)(pRxWI->SNR0);
-		pAd->StaCfg.LastSNR1 = (UCHAR)(pRxWI->SNR1);
-
-		pAd->RalinkCounters.OneSecRxOkDataCnt++;
-
-
-    	if (!((pHeader->Frag == 0) && (pHeader->FC.MoreFrag == 0)))
-    	{
-    		// re-assemble the fragmented packets
-    		// return complete frame (pRxPacket) or NULL
-    		bFragment = TRUE;
-    		pRxPacket = RTMPDeFragmentDataFrame(pAd, pRxBlk);
-    	}
-
-    	if (pRxPacket)
-    	{
-			pEntry = &pAd->MacTab.Content[pRxWI->WirelessCliID];
-
-    		// process complete frame
-    		if (bFragment && (pRxD->Decrypted) && (pEntry->WepStatus == Ndis802_11Encryption2Enabled))
-    		{
-				// Minus MIC length
-				pRxBlk->DataSize -= 8;
-
-    			// For TKIP frame, calculate the MIC value
-    			if (STACheckTkipMICValue(pAd, pEntry, pRxBlk) == FALSE)
-    			{
-    				return;
-    			}
-    		}
-
-    		STARxDataFrameAnnounce(pAd, pEntry, pRxBlk, FromWhichBSSID);
-			return;
-    	}
-    	else
-    	{
-    		// just return
-    		// because RTMPDeFragmentDataFrame() will release rx packet,
-    		// if packet is fragmented
-    		return;
-    	}
-	}
-
-	ASSERT(0);
-	// release packet
-	RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
-}
-
-VOID STAHandleRxMgmtFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk)
-{
-	PRT28XX_RXD_STRUC	pRxD = &(pRxBlk->RxD);
-	PRXWI_STRUC		pRxWI = pRxBlk->pRxWI;
-	PHEADER_802_11	pHeader = pRxBlk->pHeader;
-	PNDIS_PACKET	pRxPacket = pRxBlk->pRxPacket;
-
-	do
-	{
-
-		// We should collect RSSI not only U2M data but also my beacon
-		if ((pHeader->FC.SubType == SUBTYPE_BEACON) && (MAC_ADDR_EQUAL(&pAd->CommonCfg.Bssid, &pHeader->Addr2))
-			&& (pAd->RxAnt.EvaluatePeriod == 0))
-		{
-			Update_Rssi_Sample(pAd, &pAd->StaCfg.RssiSample, pRxWI);
-
-			pAd->StaCfg.LastSNR0 = (UCHAR)(pRxWI->SNR0);
-			pAd->StaCfg.LastSNR1 = (UCHAR)(pRxWI->SNR1);
-		}
-
-#ifdef RT30xx
-		// collect rssi information for antenna diversity
-		if (pAd->NicConfig2.field.AntDiversity)
-		{
-			if ((pRxD->U2M) || ((pHeader->FC.SubType == SUBTYPE_BEACON) && (MAC_ADDR_EQUAL(&pAd->CommonCfg.Bssid, &pHeader->Addr2))))
-			{
-					COLLECT_RX_ANTENNA_AVERAGE_RSSI(pAd, ConvertToRssi(pAd, (UCHAR)pRxWI->RSSI0, RSSI_0), 0); //Note: RSSI2 not used on RT73
-					pAd->StaCfg.NumOfAvgRssiSample ++;
-			}
-		}
-#endif // RT30xx //
-
-		// First check the size, it MUST not exceed the mlme queue size
-		if (pRxWI->MPDUtotalByteCount > MGMT_DMA_BUFFER_SIZE)
-		{
-			DBGPRINT_ERR(("STAHandleRxMgmtFrame: frame too large, size = %d \n", pRxWI->MPDUtotalByteCount));
-			break;
-		}
-
-		REPORT_MGMT_FRAME_TO_MLME(pAd, pRxWI->WirelessCliID, pHeader, pRxWI->MPDUtotalByteCount,
-									pRxWI->RSSI0, pRxWI->RSSI1, pRxWI->RSSI2, pRxD->PlcpSignal);
-	} while (FALSE);
-
-	RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_SUCCESS);
-}
-
-VOID STAHandleRxControlFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	RX_BLK			*pRxBlk)
-{
-#ifdef DOT11_N_SUPPORT
-	PRXWI_STRUC		pRxWI = pRxBlk->pRxWI;
-#endif // DOT11_N_SUPPORT //
-	PHEADER_802_11	pHeader = pRxBlk->pHeader;
-	PNDIS_PACKET	pRxPacket = pRxBlk->pRxPacket;
-
-	switch (pHeader->FC.SubType)
-	{
-		case SUBTYPE_BLOCK_ACK_REQ:
-#ifdef DOT11_N_SUPPORT
-			{
-				CntlEnqueueForRecv(pAd, pRxWI->WirelessCliID, (pRxWI->MPDUtotalByteCount), (PFRAME_BA_REQ)pHeader);
-			}
-			break;
-#endif // DOT11_N_SUPPORT //
-		case SUBTYPE_BLOCK_ACK:
-		case SUBTYPE_ACK:
-		default:
-			break;
-	}
-
-	RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Process RxDone interrupt, running in DPC level
-
-	Arguments:
-		pAd Pointer to our adapter
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-		This routine has to maintain Rx ring read pointer.
-		Need to consider QOS DATA format when converting to 802.3
-	========================================================================
-*/
-BOOLEAN STARxDoneInterruptHandle(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	BOOLEAN			argc)
-{
-	NDIS_STATUS			Status;
-	UINT32			RxProcessed, RxPending;
-	BOOLEAN			bReschedule = FALSE;
-	RT28XX_RXD_STRUC	*pRxD;
-	UCHAR			*pData;
-	PRXWI_STRUC		pRxWI;
-	PNDIS_PACKET	pRxPacket;
-	PHEADER_802_11	pHeader;
-	RX_BLK			RxCell;
-
-	RxProcessed = RxPending = 0;
-
-	// process whole rx ring
-	while (1)
-	{
-
-		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF |
-								fRTMP_ADAPTER_RESET_IN_PROGRESS |
-								fRTMP_ADAPTER_HALT_IN_PROGRESS |
-								fRTMP_ADAPTER_NIC_NOT_EXIST) ||
-			!RTMP_TEST_FLAG(pAd,fRTMP_ADAPTER_START_UP))
-		{
-			break;
-		}
-
-
-		RxProcessed ++; // test
-
-		// 1. allocate a new data packet into rx ring to replace received packet
-		//    then processing the received packet
-		// 2. the callee must take charge of release of packet
-		// 3. As far as driver is concerned ,
-		//    the rx packet must
-		//      a. be indicated to upper layer or
-		//      b. be released if it is discarded
-		pRxPacket = GetPacketFromRxRing(pAd, &(RxCell.RxD), &bReschedule, &RxPending);
-		if (pRxPacket == NULL)
-		{
-			// no more packet to process
-			break;
-		}
-
-		// get rx ring descriptor
-		pRxD = &(RxCell.RxD);
-		// get rx data buffer
-		pData	= GET_OS_PKT_DATAPTR(pRxPacket);
-		pRxWI	= (PRXWI_STRUC) pData;
-		pHeader = (PHEADER_802_11) (pData+RXWI_SIZE) ;
-
-#ifdef RT_BIG_ENDIAN
-	    RTMPFrameEndianChange(pAd, (PUCHAR)pHeader, DIR_READ, TRUE);
-		RTMPWIEndianChange((PUCHAR)pRxWI, TYPE_RXWI);
-#endif
-
-		// build RxCell
-		RxCell.pRxWI = pRxWI;
-		RxCell.pHeader = pHeader;
-		RxCell.pRxPacket = pRxPacket;
-		RxCell.pData = (UCHAR *) pHeader;
-		RxCell.DataSize = pRxWI->MPDUtotalByteCount;
-		RxCell.Flags = 0;
-
-		// Increase Total receive byte counter after real data received no mater any error or not
-		pAd->RalinkCounters.ReceivedByteCount +=  pRxWI->MPDUtotalByteCount;
-		pAd->RalinkCounters.RxCount ++;
-
-		INC_COUNTER64(pAd->WlanCounters.ReceivedFragmentCount);
-
-		if (pRxWI->MPDUtotalByteCount < 14)
-			Status = NDIS_STATUS_FAILURE;
-
-        if (MONITOR_ON(pAd))
-		{
-            send_monitor_packets(pAd, &RxCell);
-			break;
-		}
-		/* RT2870 invokes STARxDoneInterruptHandle() in rtusb_bulk.c */
-#ifdef RALINK_ATE
-		if (ATE_ON(pAd))
-		{
-			pAd->ate.RxCntPerSec++;
-			ATESampleRssi(pAd, pRxWI);
-#ifdef RALINK_28xx_QA
-			if (pAd->ate.bQARxStart == TRUE)
-			{
-				/* (*pRxD) has been swapped in GetPacketFromRxRing() */
-				ATE_QA_Statistics(pAd, pRxWI, pRxD,	pHeader);
-			}
-#endif // RALINK_28xx_QA //
-			RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_SUCCESS);
-			continue;
-		}
-#endif // RALINK_ATE //
-
-		// Check for all RxD errors
-		Status = RTMPCheckRxError(pAd, pHeader, pRxWI, pRxD);
-
-		// Handle the received frame
-		if (Status == NDIS_STATUS_SUCCESS)
-		{
-			switch (pHeader->FC.Type)
-			{
-				// CASE I, receive a DATA frame
-				case BTYPE_DATA:
-				{
-					// process DATA frame
-					STAHandleRxDataFrame(pAd, &RxCell);
-				}
-				break;
-				// CASE II, receive a MGMT frame
-				case BTYPE_MGMT:
-				{
-					STAHandleRxMgmtFrame(pAd, &RxCell);
-				}
-				break;
-				// CASE III. receive a CNTL frame
-				case BTYPE_CNTL:
-				{
-					STAHandleRxControlFrame(pAd, &RxCell);
-				}
-				break;
-				// discard other type
-				default:
-					RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
-					break;
-			}
-		}
-		else
-		{
-			pAd->Counters8023.RxErrors++;
-			// discard this frame
-			RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
-		}
-	}
-
-	return bReschedule;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-	Arguments:
-		pAd 	Pointer to our adapter
-
-	IRQL = DISPATCH_LEVEL
-
-	========================================================================
-*/
-VOID	RTMPHandleTwakeupInterrupt(
-	IN PRTMP_ADAPTER pAd)
-{
-	AsicForceWakeup(pAd, FALSE);
-}
-
-/*
-========================================================================
-Routine Description:
-    Early checking and OS-depened parsing for Tx packet send to our STA driver.
-
-Arguments:
-    NDIS_HANDLE 	MiniportAdapterContext	Pointer refer to the device handle, i.e., the pAd.
-	PPNDIS_PACKET	ppPacketArray			The packet array need to do transmission.
-	UINT			NumberOfPackets			Number of packet in packet array.
-
-Return Value:
-	NONE
-
-Note:
-	This function do early checking and classification for send-out packet.
-	You only can put OS-depened & STA related code in here.
-========================================================================
-*/
-VOID STASendPackets(
-	IN	NDIS_HANDLE		MiniportAdapterContext,
-	IN	PPNDIS_PACKET	ppPacketArray,
-	IN	UINT			NumberOfPackets)
-{
-	UINT			Index;
-	PRTMP_ADAPTER	pAd = (PRTMP_ADAPTER) MiniportAdapterContext;
-	PNDIS_PACKET	pPacket;
-	BOOLEAN			allowToSend = FALSE;
-
-
-	for (Index = 0; Index < NumberOfPackets; Index++)
-	{
-		pPacket = ppPacketArray[Index];
-
-		do
-		{
-
-			if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS) ||
-				RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS) ||
-				RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))
-			{
-				// Drop send request since hardware is in reset state
-					break;
-			}
-			else if (!INFRA_ON(pAd) && !ADHOC_ON(pAd))
-			{
-				// Drop send request since there are no physical connection yet
-					break;
-			}
-			else
-			{
-				// Record that orignal packet source is from NDIS layer,so that
-				// later on driver knows how to release this NDIS PACKET
-#ifdef QOS_DLS_SUPPORT
-				MAC_TABLE_ENTRY *pEntry;
-				PUCHAR pSrcBufVA = GET_OS_PKT_DATAPTR(pPacket);
-
-				pEntry = MacTableLookup(pAd, pSrcBufVA);
-				if (pEntry && (pEntry->ValidAsDls == TRUE))
-				{
-					RTMP_SET_PACKET_WCID(pPacket, pEntry->Aid);
-				}
-				else
-#endif // QOS_DLS_SUPPORT //
-				RTMP_SET_PACKET_WCID(pPacket, 0); // this field is useless when in STA mode
-				RTMP_SET_PACKET_SOURCE(pPacket, PKTSRC_NDIS);
-				NDIS_SET_PACKET_STATUS(pPacket, NDIS_STATUS_PENDING);
-				pAd->RalinkCounters.PendingNdisPacketCount++;
-
-				allowToSend = TRUE;
-			}
-		} while(FALSE);
-
-		if (allowToSend == TRUE)
-			STASendPacket(pAd, pPacket);
-		else
-			RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
-	}
-
-	// Dequeue outgoing frames from TxSwQueue[] and process it
-	RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS);
-
-}
-
-
-/*
-========================================================================
-Routine Description:
-	This routine is used to do packet parsing and classification for Tx packet
-	to STA device, and it will en-queue packets to our TxSwQueue depends on AC
-	class.
-
-Arguments:
-	pAd    		Pointer to our adapter
-	pPacket 	Pointer to send packet
-
-Return Value:
-	NDIS_STATUS_SUCCESS			If succes to queue the packet into TxSwQueue.
-	NDIS_STATUS_FAILURE			If failed to do en-queue.
-
-Note:
-	You only can put OS-indepened & STA related code in here.
-========================================================================
-*/
-NDIS_STATUS STASendPacket(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket)
-{
-	PACKET_INFO 	PacketInfo;
-	PUCHAR			pSrcBufVA;
-	UINT			SrcBufLen;
-	UINT			AllowFragSize;
-	UCHAR			NumberOfFrag;
-//	UCHAR			RTSRequired;
-	UCHAR			QueIdx, UserPriority;
-	MAC_TABLE_ENTRY *pEntry = NULL;
-	unsigned int 	IrqFlags;
-	UCHAR			FlgIsIP = 0;
-	UCHAR			Rate;
-
-	// Prepare packet information structure for buffer descriptor
-	// chained within a single NDIS packet.
-	RTMP_QueryPacketInfo(pPacket, &PacketInfo, &pSrcBufVA, &SrcBufLen);
-
-	if (pSrcBufVA == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("STASendPacket --> pSrcBufVA == NULL !!!SrcBufLen=%x\n",SrcBufLen));
-		// Resourece is low, system did not allocate virtual address
-		// return NDIS_STATUS_FAILURE directly to upper layer
-		RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
-		return NDIS_STATUS_FAILURE;
-	}
-
-
-	if (SrcBufLen < 14)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("STASendPacket --> Ndis Packet buffer error !!!\n"));
-		RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
-		return (NDIS_STATUS_FAILURE);
-	}
-
-	// In HT rate adhoc mode, A-MPDU is often used. So need to lookup BA Table and MAC Entry.
-	// Note multicast packets in adhoc also use BSSID_WCID index.
-	{
-		if(INFRA_ON(pAd))
-		{
-#ifdef QOS_DLS_SUPPORT
-			USHORT	tmpWcid;
-
-			tmpWcid = RTMP_GET_PACKET_WCID(pPacket);
-			if (VALID_WCID(tmpWcid) &&
-				(pAd->MacTab.Content[tmpWcid].ValidAsDls== TRUE))
-			{
-				pEntry = &pAd->MacTab.Content[tmpWcid];
-				Rate = pAd->MacTab.Content[tmpWcid].CurrTxRate;
-			}
-			else
-#endif // QOS_DLS_SUPPORT //
-			{
-			pEntry = &pAd->MacTab.Content[BSSID_WCID];
-			RTMP_SET_PACKET_WCID(pPacket, BSSID_WCID);
-			Rate = pAd->CommonCfg.TxRate;
-		}
-		}
-		else if (ADHOC_ON(pAd))
-		{
-			if (*pSrcBufVA & 0x01)
-			{
-				RTMP_SET_PACKET_WCID(pPacket, MCAST_WCID);
-				pEntry = &pAd->MacTab.Content[MCAST_WCID];
-			}
-			else
-			{
-				pEntry = MacTableLookup(pAd, pSrcBufVA);
-			}
-			Rate = pAd->CommonCfg.TxRate;
-		}
-	}
-
-	if (!pEntry)
-	{
-		DBGPRINT(RT_DEBUG_ERROR,("STASendPacket->Cannot find pEntry(%2x:%2x:%2x:%2x:%2x:%2x) in MacTab!\n", PRINT_MAC(pSrcBufVA)));
-		// Resourece is low, system did not allocate virtual address
-		// return NDIS_STATUS_FAILURE directly to upper layer
-		RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
-		return NDIS_STATUS_FAILURE;
-	}
-
-	if (ADHOC_ON(pAd)
-		)
-	{
-		RTMP_SET_PACKET_WCID(pPacket, (UCHAR)pEntry->Aid);
-	}
-
-	//
-	// Check the Ethernet Frame type of this packet, and set the RTMP_SET_PACKET_SPECIFIC flags.
-	//		Here we set the PACKET_SPECIFIC flags(LLC, VLAN, DHCP/ARP, EAPOL).
-	RTMPCheckEtherType(pAd, pPacket);
-
-
-
-	//
-	// WPA 802.1x secured port control - drop all non-802.1x frame before port secured
-	//
-	if (((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) ||
-		 (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
-		 (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) ||
-		 (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)
-#ifdef WPA_SUPPLICANT_SUPPORT
-		  || (pAd->StaCfg.IEEE8021X == TRUE)
-#endif // WPA_SUPPLICANT_SUPPORT //
-#ifdef LEAP_SUPPORT
-		  || (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-#endif // LEAP_SUPPORT //
-		  )
-		  && ((pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED) || (pAd->StaCfg.MicErrCnt >= 2))
-		  && (RTMP_GET_PACKET_EAPOL(pPacket)== FALSE)
-		  )
-	{
-		DBGPRINT(RT_DEBUG_TRACE,("STASendPacket --> Drop packet before port secured !!!\n"));
-		RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
-
-		return (NDIS_STATUS_FAILURE);
-	}
-
-
-	// STEP 1. Decide number of fragments required to deliver this MSDU.
-	//	   The estimation here is not very accurate because difficult to
-	//	   take encryption overhead into consideration here. The result
-	//	   "NumberOfFrag" is then just used to pre-check if enough free
-	//	   TXD are available to hold this MSDU.
-
-
-	if (*pSrcBufVA & 0x01)	// fragmentation not allowed on multicast & broadcast
-		NumberOfFrag = 1;
-	else if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED))
-		NumberOfFrag = 1;	// Aggregation overwhelms fragmentation
-	else if (CLIENT_STATUS_TEST_FLAG(pEntry, fCLIENT_STATUS_AMSDU_INUSED))
-		NumberOfFrag = 1;	// Aggregation overwhelms fragmentation
-#ifdef DOT11_N_SUPPORT
-	else if ((pAd->StaCfg.HTPhyMode.field.MODE == MODE_HTMIX) || (pAd->StaCfg.HTPhyMode.field.MODE == MODE_HTGREENFIELD))
-		NumberOfFrag = 1;	// MIMO RATE overwhelms fragmentation
-#endif // DOT11_N_SUPPORT //
-	else
-	{
-		// The calculated "NumberOfFrag" is a rough estimation because of various
-		// encryption/encapsulation overhead not taken into consideration. This number is just
-		// used to make sure enough free TXD are available before fragmentation takes place.
-		// In case the actual required number of fragments of an NDIS packet
-		// excceeds "NumberOfFrag"caculated here and not enough free TXD available, the
-		// last fragment (i.e. last MPDU) will be dropped in RTMPHardTransmit() due to out of
-		// resource, and the NDIS packet will be indicated NDIS_STATUS_FAILURE. This should
-		// rarely happen and the penalty is just like a TX RETRY fail. Affordable.
-
-		AllowFragSize = (pAd->CommonCfg.FragmentThreshold) - LENGTH_802_11 - LENGTH_CRC;
-		NumberOfFrag = ((PacketInfo.TotalPacketLength - LENGTH_802_3 + LENGTH_802_1_H) / AllowFragSize) + 1;
-		// To get accurate number of fragmentation, Minus 1 if the size just match to allowable fragment size
-		if (((PacketInfo.TotalPacketLength - LENGTH_802_3 + LENGTH_802_1_H) % AllowFragSize) == 0)
-		{
-			NumberOfFrag--;
-		}
-	}
-
-	// Save fragment number to Ndis packet reserved field
-	RTMP_SET_PACKET_FRAGMENTS(pPacket, NumberOfFrag);
-
-
-	// STEP 2. Check the requirement of RTS:
-	//	   If multiple fragment required, RTS is required only for the first fragment
-	//	   if the fragment size large than RTS threshold
-	//     For RT28xx, Let ASIC send RTS/CTS
-	RTMP_SET_PACKET_RTS(pPacket, 0);
-	RTMP_SET_PACKET_TXRATE(pPacket, pAd->CommonCfg.TxRate);
-
-	//
-	// STEP 3. Traffic classification. outcome = <UserPriority, QueIdx>
-	//
-	UserPriority = 0;
-	QueIdx		 = QID_AC_BE;
-	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) &&
-		CLIENT_STATUS_TEST_FLAG(pEntry, fCLIENT_STATUS_WMM_CAPABLE))
-	{
-		USHORT Protocol;
-		UCHAR  LlcSnapLen = 0, Byte0, Byte1;
-		do
-		{
-			// get Ethernet protocol field
-			Protocol = (USHORT)((pSrcBufVA[12] << 8) + pSrcBufVA[13]);
-			if (Protocol <= 1500)
-			{
-				// get Ethernet protocol field from LLC/SNAP
-				if (Sniff2BytesFromNdisBuffer(PacketInfo.pFirstBuffer, LENGTH_802_3 + 6, &Byte0, &Byte1) != NDIS_STATUS_SUCCESS)
-					break;
-
-				Protocol = (USHORT)((Byte0 << 8) + Byte1);
-				LlcSnapLen = 8;
-			}
-
-			// always AC_BE for non-IP packet
-			if (Protocol != 0x0800)
-				break;
-
-			// get IP header
-			if (Sniff2BytesFromNdisBuffer(PacketInfo.pFirstBuffer, LENGTH_802_3 + LlcSnapLen, &Byte0, &Byte1) != NDIS_STATUS_SUCCESS)
-				break;
-
-			// return AC_BE if packet is not IPv4
-			if ((Byte0 & 0xf0) != 0x40)
-				break;
-
-			FlgIsIP = 1;
-			UserPriority = (Byte1 & 0xe0) >> 5;
-			QueIdx = MapUserPriorityToAccessCategory[UserPriority];
-
-			// TODO: have to check ACM bit. apply TSPEC if ACM is ON
-			// TODO: downgrade UP & QueIdx before passing ACM
-			if (pAd->CommonCfg.APEdcaParm.bACM[QueIdx])
-			{
-				UserPriority = 0;
-				QueIdx		 = QID_AC_BE;
-			}
-		} while (FALSE);
-	}
-
-	RTMP_SET_PACKET_UP(pPacket, UserPriority);
-
-
-
-	// Make sure SendTxWait queue resource won't be used by other threads
-	RTMP_IRQ_LOCK(&pAd->irq_lock, IrqFlags);
-	if (pAd->TxSwQueue[QueIdx].Number >= MAX_PACKETS_IN_QUEUE)
-	{
-		RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags);
-#ifdef BLOCK_NET_IF
-		StopNetIfQueue(pAd, QueIdx, pPacket);
-#endif // BLOCK_NET_IF //
-		RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
-
-		return NDIS_STATUS_FAILURE;
-	}
-	else
-	{
-		InsertTailQueue(&pAd->TxSwQueue[QueIdx], PACKET_TO_QUEUE_ENTRY(pPacket));
-	}
-	RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags);
-
-#ifdef DOT11_N_SUPPORT
-    if ((pAd->CommonCfg.BACapability.field.AutoBA == TRUE)&&
-        IS_HT_STA(pEntry))
-	{
-	    //PMAC_TABLE_ENTRY pMacEntry = &pAd->MacTab.Content[BSSID_WCID];
-		if (((pEntry->TXBAbitmap & (1<<UserPriority)) == 0) &&
-            ((pEntry->BADeclineBitmap & (1<<UserPriority)) == 0) &&
-            (pEntry->PortSecured == WPA_802_1X_PORT_SECURED)
-			 // For IOT compatibility, if
-			 // 1. It is Ralink chip or
-			 // 2. It is OPEN or AES mode,
-			 // then BA session can be bulit.
-			 && ((pEntry->ValidAsCLI && pAd->MlmeAux.APRalinkIe != 0x0) ||
-			 	 (pEntry->WepStatus == Ndis802_11WEPDisabled || pEntry->WepStatus == Ndis802_11Encryption3Enabled))
-			)
-		{
-			BAOriSessionSetUp(pAd, pEntry, 0, 0, 10, FALSE);
-		}
-	}
-#endif // DOT11_N_SUPPORT //
-
-	pAd->RalinkCounters.OneSecOsTxCount[QueIdx]++; // TODO: for debug only. to be removed
-	return NDIS_STATUS_SUCCESS;
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		This subroutine will scan through releative ring descriptor to find
-		out avaliable free ring descriptor and compare with request size.
-
-	Arguments:
-		pAd Pointer to our adapter
-		QueIdx		Selected TX Ring
-
-	Return Value:
-		NDIS_STATUS_FAILURE 	Not enough free descriptor
-		NDIS_STATUS_SUCCESS 	Enough free descriptor
-
-	IRQL = PASSIVE_LEVEL
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-
-#ifdef RT2870
-/*
-	Actually, this function used to check if the TxHardware Queue still has frame need to send.
-	If no frame need to send, go to sleep, else, still wake up.
-*/
-NDIS_STATUS RTMPFreeTXDRequest(
-	IN		PRTMP_ADAPTER	pAd,
-	IN		UCHAR			QueIdx,
-	IN		UCHAR			NumberRequired,
-	IN		PUCHAR			FreeNumberIs)
-{
-	//ULONG		FreeNumber = 0;
-	NDIS_STATUS 	Status = NDIS_STATUS_FAILURE;
-	unsigned long   IrqFlags;
-	HT_TX_CONTEXT	*pHTTXContext;
-
-	switch (QueIdx)
-	{
-		case QID_AC_BK:
-		case QID_AC_BE:
-		case QID_AC_VI:
-		case QID_AC_VO:
-		case QID_HCCA:
-			{
-				pHTTXContext = &pAd->TxContext[QueIdx];
-				RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
-				if ((pHTTXContext->CurWritePosition != pHTTXContext->ENextBulkOutPosition) ||
-					(pHTTXContext->IRPPending == TRUE))
-				{
-					Status = NDIS_STATUS_FAILURE;
-				}
-				else
-				{
-					Status = NDIS_STATUS_SUCCESS;
-				}
-				RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
-			}
-			break;
-
-		case QID_MGMT:
-			if (pAd->MgmtRing.TxSwFreeIdx != MGMT_RING_SIZE)
-				Status = NDIS_STATUS_FAILURE;
-			else
-				Status = NDIS_STATUS_SUCCESS;
-			break;
-
-		default:
-			DBGPRINT(RT_DEBUG_ERROR,("RTMPFreeTXDRequest::Invalid QueIdx(=%d)\n", QueIdx));
-			break;
-	}
-
-	return (Status);
-
-}
-#endif // RT2870 //
-
-
-VOID RTMPSendDisassociationFrame(
-	IN	PRTMP_ADAPTER	pAd)
-{
-}
-
-VOID	RTMPSendNullFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			TxRate,
-	IN	BOOLEAN 		bQosNull)
-{
-	UCHAR	NullFrame[48];
-	ULONG	Length;
-	PHEADER_802_11	pHeader_802_11;
-
-
-#ifdef RALINK_ATE
-	if(ATE_ON(pAd))
-	{
-		return;
-	}
-#endif // RALINK_ATE //
-
-    // WPA 802.1x secured port control
-    if (((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) ||
-         (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
-         (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) ||
-         (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)
-#ifdef WPA_SUPPLICANT_SUPPORT
-			  || (pAd->StaCfg.IEEE8021X == TRUE)
-#endif
-        ) &&
-       (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
-	{
-		return;
-	}
-
-	NdisZeroMemory(NullFrame, 48);
-	Length = sizeof(HEADER_802_11);
-
-	pHeader_802_11 = (PHEADER_802_11) NullFrame;
-
-	pHeader_802_11->FC.Type = BTYPE_DATA;
-	pHeader_802_11->FC.SubType = SUBTYPE_NULL_FUNC;
-	pHeader_802_11->FC.ToDs = 1;
-	COPY_MAC_ADDR(pHeader_802_11->Addr1, pAd->CommonCfg.Bssid);
-	COPY_MAC_ADDR(pHeader_802_11->Addr2, pAd->CurrentAddress);
-	COPY_MAC_ADDR(pHeader_802_11->Addr3, pAd->CommonCfg.Bssid);
-
-	if (pAd->CommonCfg.bAPSDForcePowerSave)
-	{
-		pHeader_802_11->FC.PwrMgmt = PWR_SAVE;
-	}
-	else
-	{
-		pHeader_802_11->FC.PwrMgmt = (pAd->StaCfg.Psm == PWR_SAVE) ? 1: 0;
-	}
-	pHeader_802_11->Duration = pAd->CommonCfg.Dsifs + RTMPCalcDuration(pAd, TxRate, 14);
-
-	pAd->Sequence++;
-	pHeader_802_11->Sequence = pAd->Sequence;
-
-	// Prepare QosNull function frame
-	if (bQosNull)
-	{
-		pHeader_802_11->FC.SubType = SUBTYPE_QOS_NULL;
-
-		// copy QOS control bytes
-		NullFrame[Length]	=  0;
-		NullFrame[Length+1] =  0;
-		Length += 2;// if pad with 2 bytes for alignment, APSD will fail
-	}
-
-	HAL_KickOutNullFrameTx(pAd, 0, NullFrame, Length);
-
-}
-
-// IRQL = DISPATCH_LEVEL
-VOID	RTMPSendRTSFrame(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pDA,
-	IN	unsigned int	NextMpduSize,
-	IN	UCHAR			TxRate,
-	IN	UCHAR			RTSRate,
-	IN	USHORT			AckDuration,
-	IN	UCHAR			QueIdx,
-	IN	UCHAR			FrameGap)
-{
-}
-
-
-
-// --------------------------------------------------------
-//  FIND ENCRYPT KEY AND DECIDE CIPHER ALGORITHM
-//		Find the WPA key, either Group or Pairwise Key
-//		LEAP + TKIP also use WPA key.
-// --------------------------------------------------------
-// Decide WEP bit and cipher suite to be used. Same cipher suite should be used for whole fragment burst
-// In Cisco CCX 2.0 Leap Authentication
-//		   WepStatus is Ndis802_11Encryption1Enabled but the key will use PairwiseKey
-//		   Instead of the SharedKey, SharedKey Length may be Zero.
-VOID STAFindCipherAlgorithm(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk)
-{
-	NDIS_802_11_ENCRYPTION_STATUS	Cipher;				// To indicate cipher used for this packet
-	UCHAR							CipherAlg = CIPHER_NONE;		// cipher alogrithm
-	UCHAR							KeyIdx = 0xff;
-	PUCHAR							pSrcBufVA;
-	PCIPHER_KEY						pKey = NULL;
-
-	pSrcBufVA = GET_OS_PKT_DATAPTR(pTxBlk->pPacket);
-
-	{
-	    // Select Cipher
-	    if ((*pSrcBufVA & 0x01) && (ADHOC_ON(pAd)))
-	        Cipher = pAd->StaCfg.GroupCipher; // Cipher for Multicast or Broadcast
-	    else
-	        Cipher = pAd->StaCfg.PairCipher; // Cipher for Unicast
-
-		if (RTMP_GET_PACKET_EAPOL(pTxBlk->pPacket))
-		{
-			ASSERT(pAd->SharedKey[BSS0][0].CipherAlg <= CIPHER_CKIP128);
-
-			// 4-way handshaking frame must be clear
-			if (!(TX_BLK_TEST_FLAG(pTxBlk, fTX_bClearEAPFrame)) && (pAd->SharedKey[BSS0][0].CipherAlg) &&
-				(pAd->SharedKey[BSS0][0].KeyLen))
-			{
-				CipherAlg = pAd->SharedKey[BSS0][0].CipherAlg;
-				KeyIdx = 0;
-			}
-		}
-		else if (Cipher == Ndis802_11Encryption1Enabled)
-		{
-#ifdef LEAP_SUPPORT
-			if (pAd->StaCfg.CkipFlag & 0x10) // Cisco CKIP KP is on
-			{
-				if (LEAP_CCKM_ON(pAd))
-				{
-					if (((*pSrcBufVA & 0x01) && (ADHOC_ON(pAd))))
-						KeyIdx = 1;
-					else
-						KeyIdx = 0;
-				}
-				else
-					KeyIdx = pAd->StaCfg.DefaultKeyId;
-			}
-			else if (pAd->StaCfg.CkipFlag & 0x08) // only CKIP CMIC
-				KeyIdx = pAd->StaCfg.DefaultKeyId;
-			else if (LEAP_CCKM_ON(pAd))
-			{
-				if ((*pSrcBufVA & 0x01) && (ADHOC_ON(pAd)))
-					KeyIdx = 1;
-				else
-					KeyIdx = 0;
-			}
-			else	// standard WEP64 or WEP128
-#endif // LEAP_SUPPORT //
-				KeyIdx = pAd->StaCfg.DefaultKeyId;
-		}
-		else if ((Cipher == Ndis802_11Encryption2Enabled) ||
-				 (Cipher == Ndis802_11Encryption3Enabled))
-		{
-			if ((*pSrcBufVA & 0x01) && (ADHOC_ON(pAd))) // multicast
-				KeyIdx = pAd->StaCfg.DefaultKeyId;
-			else if (pAd->SharedKey[BSS0][0].KeyLen)
-				KeyIdx = 0;
-			else
-				KeyIdx = pAd->StaCfg.DefaultKeyId;
-		}
-
-		if (KeyIdx == 0xff)
-			CipherAlg = CIPHER_NONE;
-		else if ((Cipher == Ndis802_11EncryptionDisabled) || (pAd->SharedKey[BSS0][KeyIdx].KeyLen == 0))
-			CipherAlg = CIPHER_NONE;
-#ifdef WPA_SUPPLICANT_SUPPORT
-	    else if ( pAd->StaCfg.WpaSupplicantUP &&
-	             (Cipher == Ndis802_11Encryption1Enabled) &&
-	             (pAd->StaCfg.IEEE8021X == TRUE) &&
-	             (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
-	        CipherAlg = CIPHER_NONE;
-#endif // WPA_SUPPLICANT_SUPPORT //
-		else
-		{
-			//Header_802_11.FC.Wep = 1;
-			CipherAlg = pAd->SharedKey[BSS0][KeyIdx].CipherAlg;
-			pKey = &pAd->SharedKey[BSS0][KeyIdx];
-		}
-	}
-
-	pTxBlk->CipherAlg = CipherAlg;
-	pTxBlk->pKey = pKey;
-}
-
-
-VOID STABuildCommon802_11Header(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  TX_BLK          *pTxBlk)
-{
-
-	HEADER_802_11	*pHeader_802_11;
-#ifdef QOS_DLS_SUPPORT
-	BOOLEAN	bDLSFrame = FALSE;
-	INT	DlsEntryIndex = 0;
-#endif // QOS_DLS_SUPPORT //
-
-	//
-	// MAKE A COMMON 802.11 HEADER
-	//
-
-	// normal wlan header size : 24 octets
-	pTxBlk->MpduHeaderLen = sizeof(HEADER_802_11);
-
-	pHeader_802_11 = (HEADER_802_11 *) &pTxBlk->HeaderBuf[TXINFO_SIZE + TXWI_SIZE];
-
-	NdisZeroMemory(pHeader_802_11, sizeof(HEADER_802_11));
-
-	pHeader_802_11->FC.FrDs = 0;
-	pHeader_802_11->FC.Type = BTYPE_DATA;
-	pHeader_802_11->FC.SubType = ((TX_BLK_TEST_FLAG(pTxBlk, fTX_bWMM)) ? SUBTYPE_QDATA : SUBTYPE_DATA);
-
-#ifdef QOS_DLS_SUPPORT
-	if (INFRA_ON(pAd))
-	{
-		// Check if the frame can be sent through DLS direct link interface
-		// If packet can be sent through DLS, then force aggregation disable. (Hard to determine peer STA's capability)
-		DlsEntryIndex = RTMPCheckDLSFrame(pAd, pTxBlk->pSrcBufHeader);
-		if (DlsEntryIndex >= 0)
-			bDLSFrame = TRUE;
-		else
-			bDLSFrame = FALSE;
-	}
-#endif // QOS_DLS_SUPPORT //
-
-    if (pTxBlk->pMacEntry)
-	{
-		if (TX_BLK_TEST_FLAG(pTxBlk, fTX_bForceNonQoS))
-		{
-			pHeader_802_11->Sequence = pTxBlk->pMacEntry->NonQosDataSeq;
-			pTxBlk->pMacEntry->NonQosDataSeq = (pTxBlk->pMacEntry->NonQosDataSeq+1) & MAXSEQ;
-		}
-		else
-		{
-#ifdef QOS_DLS_SUPPORT
-			if (bDLSFrame)
-			{
-				pHeader_802_11->Sequence = pAd->StaCfg.DLSEntry[DlsEntryIndex].Sequence;
-				pAd->StaCfg.DLSEntry[DlsEntryIndex].Sequence = (pAd->StaCfg.DLSEntry[DlsEntryIndex].Sequence+1) & MAXSEQ;
-			}
-			else
-#endif // QOS_DLS_SUPPORT //
-			{
-    	    pHeader_802_11->Sequence = pTxBlk->pMacEntry->TxSeq[pTxBlk->UserPriority];
-    	    pTxBlk->pMacEntry->TxSeq[pTxBlk->UserPriority] = (pTxBlk->pMacEntry->TxSeq[pTxBlk->UserPriority]+1) & MAXSEQ;
-    	}
-	}
-	}
-	else
-	{
-		pHeader_802_11->Sequence = pAd->Sequence;
-		pAd->Sequence = (pAd->Sequence+1) & MAXSEQ; // next sequence
-	}
-
-	pHeader_802_11->Frag = 0;
-
-	pHeader_802_11->FC.MoreData = TX_BLK_TEST_FLAG(pTxBlk, fTX_bMoreData);
-
-	{
-		if (INFRA_ON(pAd))
-		{
-#ifdef QOS_DLS_SUPPORT
-			if (bDLSFrame)
-			{
-				COPY_MAC_ADDR(pHeader_802_11->Addr1, pTxBlk->pSrcBufHeader);
-				COPY_MAC_ADDR(pHeader_802_11->Addr2, pAd->CurrentAddress);
-				COPY_MAC_ADDR(pHeader_802_11->Addr3, pAd->CommonCfg.Bssid);
-				pHeader_802_11->FC.ToDs = 0;
-			}
-			else
-#endif // QOS_DLS_SUPPORT //
-			{
-			COPY_MAC_ADDR(pHeader_802_11->Addr1, pAd->CommonCfg.Bssid);
-			COPY_MAC_ADDR(pHeader_802_11->Addr2, pAd->CurrentAddress);
-			COPY_MAC_ADDR(pHeader_802_11->Addr3, pTxBlk->pSrcBufHeader);
-			pHeader_802_11->FC.ToDs = 1;
-		}
-		}
-		else if (ADHOC_ON(pAd))
-		{
-			COPY_MAC_ADDR(pHeader_802_11->Addr1, pTxBlk->pSrcBufHeader);
-			COPY_MAC_ADDR(pHeader_802_11->Addr2, pAd->CurrentAddress);
-			COPY_MAC_ADDR(pHeader_802_11->Addr3, pAd->CommonCfg.Bssid);
-			pHeader_802_11->FC.ToDs = 0;
-		}
-	}
-
-	if (pTxBlk->CipherAlg != CIPHER_NONE)
-		pHeader_802_11->FC.Wep = 1;
-
-	// -----------------------------------------------------------------
-	// STEP 2. MAKE A COMMON 802.11 HEADER SHARED BY ENTIRE FRAGMENT BURST. Fill sequence later.
-	// -----------------------------------------------------------------
-	if (pAd->CommonCfg.bAPSDForcePowerSave)
-    	pHeader_802_11->FC.PwrMgmt = PWR_SAVE;
-	else
-    	pHeader_802_11->FC.PwrMgmt = (pAd->StaCfg.Psm == PWR_SAVE);
-}
-
-#ifdef DOT11_N_SUPPORT
-VOID STABuildCache802_11Header(
-	IN RTMP_ADAPTER		*pAd,
-	IN TX_BLK			*pTxBlk,
-	IN UCHAR			*pHeader)
-{
-	MAC_TABLE_ENTRY	*pMacEntry;
-	PHEADER_802_11	pHeader80211;
-
-	pHeader80211 = (PHEADER_802_11)pHeader;
-	pMacEntry = pTxBlk->pMacEntry;
-
-	//
-	// Update the cached 802.11 HEADER
-	//
-
-	// normal wlan header size : 24 octets
-	pTxBlk->MpduHeaderLen = sizeof(HEADER_802_11);
-
-	// More Bit
-	pHeader80211->FC.MoreData = TX_BLK_TEST_FLAG(pTxBlk, fTX_bMoreData);
-
-	// Sequence
-	pHeader80211->Sequence = pMacEntry->TxSeq[pTxBlk->UserPriority];
-    pMacEntry->TxSeq[pTxBlk->UserPriority] = (pMacEntry->TxSeq[pTxBlk->UserPriority]+1) & MAXSEQ;
-
-	{
-		// Check if the frame can be sent through DLS direct link interface
-		// If packet can be sent through DLS, then force aggregation disable. (Hard to determine peer STA's capability)
-#ifdef QOS_DLS_SUPPORT
-		BOOLEAN	bDLSFrame = FALSE;
-		INT	DlsEntryIndex = 0;
-
-		DlsEntryIndex = RTMPCheckDLSFrame(pAd, pTxBlk->pSrcBufHeader);
-		if (DlsEntryIndex >= 0)
-			bDLSFrame = TRUE;
-		else
-			bDLSFrame = FALSE;
-#endif // QOS_DLS_SUPPORT //
-
-		// The addr3 of normal packet send from DS is Dest Mac address.
-#ifdef QOS_DLS_SUPPORT
-		if (bDLSFrame)
-		{
-			COPY_MAC_ADDR(pHeader80211->Addr1, pTxBlk->pSrcBufHeader);
-			COPY_MAC_ADDR(pHeader80211->Addr3, pAd->CommonCfg.Bssid);
-			pHeader80211->FC.ToDs = 0;
-		}
-		else
-#endif // QOS_DLS_SUPPORT //
-		if (ADHOC_ON(pAd))
-			COPY_MAC_ADDR(pHeader80211->Addr3, pAd->CommonCfg.Bssid);
-		else
-			COPY_MAC_ADDR(pHeader80211->Addr3, pTxBlk->pSrcBufHeader);
-	}
-
-	// -----------------------------------------------------------------
-	// STEP 2. MAKE A COMMON 802.11 HEADER SHARED BY ENTIRE FRAGMENT BURST. Fill sequence later.
-	// -----------------------------------------------------------------
-	if (pAd->CommonCfg.bAPSDForcePowerSave)
-    	pHeader80211->FC.PwrMgmt = PWR_SAVE;
-	else
-    	pHeader80211->FC.PwrMgmt = (pAd->StaCfg.Psm == PWR_SAVE);
-}
-#endif // DOT11_N_SUPPORT //
-
-static inline PUCHAR STA_Build_ARalink_Frame_Header(
-	IN RTMP_ADAPTER *pAd,
-	IN TX_BLK		*pTxBlk)
-{
-	PUCHAR			pHeaderBufPtr;
-	HEADER_802_11	*pHeader_802_11;
-	PNDIS_PACKET	pNextPacket;
-	UINT32			nextBufLen;
-	PQUEUE_ENTRY	pQEntry;
-
-	STAFindCipherAlgorithm(pAd, pTxBlk);
-	STABuildCommon802_11Header(pAd, pTxBlk);
-
-
-	pHeaderBufPtr = &pTxBlk->HeaderBuf[TXINFO_SIZE + TXWI_SIZE];
-	pHeader_802_11 = (HEADER_802_11 *) pHeaderBufPtr;
-
-	// steal "order" bit to mark "aggregation"
-	pHeader_802_11->FC.Order = 1;
-
-	// skip common header
-	pHeaderBufPtr += pTxBlk->MpduHeaderLen;
-
-	if (TX_BLK_TEST_FLAG(pTxBlk, fTX_bWMM))
-	{
-		//
-		// build QOS Control bytes
-		//
-		*pHeaderBufPtr = (pTxBlk->UserPriority & 0x0F);
-
-		*(pHeaderBufPtr+1) = 0;
-		pHeaderBufPtr +=2;
-		pTxBlk->MpduHeaderLen += 2;
-	}
-
-	// padding at front of LLC header. LLC header should at 4-bytes aligment.
-	pTxBlk->HdrPadLen = (ULONG)pHeaderBufPtr;
-	pHeaderBufPtr = (PCHAR)ROUND_UP(pHeaderBufPtr, 4);
-	pTxBlk->HdrPadLen = (ULONG)(pHeaderBufPtr - pTxBlk->HdrPadLen);
-
-	// For RA Aggregation,
-	// put the 2nd MSDU length(extra 2-byte field) after QOS_CONTROL in little endian format
-	pQEntry = pTxBlk->TxPacketList.Head;
-	pNextPacket = QUEUE_ENTRY_TO_PKT(pQEntry);
-	nextBufLen = GET_OS_PKT_LEN(pNextPacket);
-	if (RTMP_GET_PACKET_VLAN(pNextPacket))
-		nextBufLen -= LENGTH_802_1Q;
-
-	*pHeaderBufPtr = (UCHAR)nextBufLen & 0xff;
-	*(pHeaderBufPtr+1) = (UCHAR)(nextBufLen >> 8);
-
-	pHeaderBufPtr += 2;
-	pTxBlk->MpduHeaderLen += 2;
-
-	return pHeaderBufPtr;
-
-}
-
-#ifdef DOT11_N_SUPPORT
-static inline PUCHAR STA_Build_AMSDU_Frame_Header(
-	IN RTMP_ADAPTER *pAd,
-	IN TX_BLK		*pTxBlk)
-{
-	PUCHAR			pHeaderBufPtr;//, pSaveBufPtr;
-	HEADER_802_11	*pHeader_802_11;
-
-
-	STAFindCipherAlgorithm(pAd, pTxBlk);
-	STABuildCommon802_11Header(pAd, pTxBlk);
-
-	pHeaderBufPtr = &pTxBlk->HeaderBuf[TXINFO_SIZE + TXWI_SIZE];
-	pHeader_802_11 = (HEADER_802_11 *) pHeaderBufPtr;
-
-	// skip common header
-	pHeaderBufPtr += pTxBlk->MpduHeaderLen;
-
-	//
-	// build QOS Control bytes
-	//
-	*pHeaderBufPtr = (pTxBlk->UserPriority & 0x0F);
-
-	//
-	// A-MSDU packet
-	//
-	*pHeaderBufPtr |= 0x80;
-
-	*(pHeaderBufPtr+1) = 0;
-	pHeaderBufPtr +=2;
-	pTxBlk->MpduHeaderLen += 2;
-
-	//pSaveBufPtr = pHeaderBufPtr;
-
-	//
-	// padding at front of LLC header
-	// LLC header should locate at 4-octets aligment
-	//
-	// @@@ MpduHeaderLen excluding padding @@@
-	//
-	pTxBlk->HdrPadLen = (ULONG)pHeaderBufPtr;
-	pHeaderBufPtr = (PCHAR) ROUND_UP(pHeaderBufPtr, 4);
-	pTxBlk->HdrPadLen = (ULONG)(pHeaderBufPtr - pTxBlk->HdrPadLen);
-
-	return pHeaderBufPtr;
-
-}
-
-
-VOID STA_AMPDU_Frame_Tx(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk)
-{
-	HEADER_802_11	*pHeader_802_11;
-	PUCHAR			pHeaderBufPtr;
-	USHORT			FreeNumber;
-	MAC_TABLE_ENTRY	*pMacEntry;
-	BOOLEAN			bVLANPkt;
-	PQUEUE_ENTRY	pQEntry;
-
-	ASSERT(pTxBlk);
-
-	while(pTxBlk->TxPacketList.Head)
-	{
-		pQEntry = RemoveHeadQueue(&pTxBlk->TxPacketList);
-		pTxBlk->pPacket = QUEUE_ENTRY_TO_PACKET(pQEntry);
-		if ( RTMP_FillTxBlkInfo(pAd, pTxBlk) != TRUE)
-		{
-			RELEASE_NDIS_PACKET(pAd, pTxBlk->pPacket, NDIS_STATUS_FAILURE);
-			continue;
-		}
-
-		bVLANPkt = (RTMP_GET_PACKET_VLAN(pTxBlk->pPacket) ? TRUE : FALSE);
-
-		pMacEntry = pTxBlk->pMacEntry;
-		if (pMacEntry->isCached)
-		{
-			// NOTE: Please make sure the size of pMacEntry->CachedBuf[] is smaller than pTxBlk->HeaderBuf[]!!!!
-			NdisMoveMemory((PUCHAR)&pTxBlk->HeaderBuf[TXINFO_SIZE], (PUCHAR)&pMacEntry->CachedBuf[0], TXWI_SIZE + sizeof(HEADER_802_11));
-			pHeaderBufPtr = (PUCHAR)(&pTxBlk->HeaderBuf[TXINFO_SIZE + TXWI_SIZE]);
-			STABuildCache802_11Header(pAd, pTxBlk, pHeaderBufPtr);
-		}
-		else
-		{
-			STAFindCipherAlgorithm(pAd, pTxBlk);
-			STABuildCommon802_11Header(pAd, pTxBlk);
-
-			pHeaderBufPtr = &pTxBlk->HeaderBuf[TXINFO_SIZE + TXWI_SIZE];
-		}
-
-
-		pHeader_802_11 = (HEADER_802_11 *) pHeaderBufPtr;
-
-		// skip common header
-		pHeaderBufPtr += pTxBlk->MpduHeaderLen;
-
-		//
-		// build QOS Control bytes
-		//
-		*pHeaderBufPtr = (pTxBlk->UserPriority & 0x0F);
-		*(pHeaderBufPtr+1) = 0;
-		pHeaderBufPtr +=2;
-		pTxBlk->MpduHeaderLen += 2;
-
-		//
-		// build HTC+
-		// HTC control filed following QoS field
-		//
-		if ((pAd->CommonCfg.bRdg == TRUE) && CLIENT_STATUS_TEST_FLAG(pTxBlk->pMacEntry, fCLIENT_STATUS_RDG_CAPABLE))
-		{
-			if (pMacEntry->isCached == FALSE)
-			{
-				// mark HTC bit
-				pHeader_802_11->FC.Order = 1;
-
-				NdisZeroMemory(pHeaderBufPtr, 4);
-				*(pHeaderBufPtr+3) |= 0x80;
-			}
-			pHeaderBufPtr += 4;
-			pTxBlk->MpduHeaderLen += 4;
-		}
-
-		//pTxBlk->MpduHeaderLen = pHeaderBufPtr - pTxBlk->HeaderBuf - TXWI_SIZE - TXINFO_SIZE;
-		ASSERT(pTxBlk->MpduHeaderLen >= 24);
-
-		// skip 802.3 header
-		pTxBlk->pSrcBufData = pTxBlk->pSrcBufHeader + LENGTH_802_3;
-		pTxBlk->SrcBufLen  -= LENGTH_802_3;
-
-		// skip vlan tag
-		if (bVLANPkt)
-		{
-			pTxBlk->pSrcBufData	+= LENGTH_802_1Q;
-			pTxBlk->SrcBufLen	-= LENGTH_802_1Q;
-		}
-
-		//
-		// padding at front of LLC header
-		// LLC header should locate at 4-octets aligment
-		//
-		// @@@ MpduHeaderLen excluding padding @@@
-		//
-		pTxBlk->HdrPadLen = (ULONG)pHeaderBufPtr;
-		pHeaderBufPtr = (PCHAR) ROUND_UP(pHeaderBufPtr, 4);
-		pTxBlk->HdrPadLen = (ULONG)(pHeaderBufPtr - pTxBlk->HdrPadLen);
-
-		{
-
-			//
-			// Insert LLC-SNAP encapsulation - 8 octets
-			//
-			EXTRA_LLCSNAP_ENCAP_FROM_PKT_OFFSET(pTxBlk->pSrcBufData-2, pTxBlk->pExtraLlcSnapEncap);
-			if (pTxBlk->pExtraLlcSnapEncap)
-			{
-				NdisMoveMemory(pHeaderBufPtr, pTxBlk->pExtraLlcSnapEncap, 6);
-				pHeaderBufPtr += 6;
-				// get 2 octets (TypeofLen)
-				NdisMoveMemory(pHeaderBufPtr, pTxBlk->pSrcBufData-2, 2);
-				pHeaderBufPtr += 2;
-				pTxBlk->MpduHeaderLen += LENGTH_802_1_H;
-			}
-
-		}
-
-		if (pMacEntry->isCached)
-		{
-            RTMPWriteTxWI_Cache(pAd, (PTXWI_STRUC)(&pTxBlk->HeaderBuf[TXINFO_SIZE]), pTxBlk);
-		}
-		else
-		{
-			RTMPWriteTxWI_Data(pAd, (PTXWI_STRUC)(&pTxBlk->HeaderBuf[TXINFO_SIZE]), pTxBlk);
-
-			NdisZeroMemory((PUCHAR)(&pMacEntry->CachedBuf[0]), sizeof(pMacEntry->CachedBuf));
-			NdisMoveMemory((PUCHAR)(&pMacEntry->CachedBuf[0]), (PUCHAR)(&pTxBlk->HeaderBuf[TXINFO_SIZE]), (pHeaderBufPtr - (PUCHAR)(&pTxBlk->HeaderBuf[TXINFO_SIZE])));
-			pMacEntry->isCached = TRUE;
-		}
-
-		// calculate Transmitted AMPDU count and ByteCount
-		{
-			pAd->RalinkCounters.TransmittedMPDUsInAMPDUCount.u.LowPart ++;
-			pAd->RalinkCounters.TransmittedOctetsInAMPDUCount.QuadPart += pTxBlk->SrcBufLen;
-		}
-
-		//FreeNumber = GET_TXRING_FREENO(pAd, QueIdx);
-
-		HAL_WriteTxResource(pAd, pTxBlk, TRUE, &FreeNumber);
-
-		//
-		// Kick out Tx
-		//
-		HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx);
-
-		pAd->RalinkCounters.KickTxCount++;
-		pAd->RalinkCounters.OneSecTxDoneCount++;
-	}
-
-}
-
-
-VOID STA_AMSDU_Frame_Tx(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk)
-{
-	PUCHAR			pHeaderBufPtr;
-	USHORT			FreeNumber;
-	USHORT			subFramePayloadLen = 0;	// AMSDU Subframe length without AMSDU-Header / Padding.
-	USHORT			totalMPDUSize=0;
-	UCHAR			*subFrameHeader;
-	UCHAR			padding = 0;
-	USHORT			FirstTx = 0, LastTxIdx = 0;
-	BOOLEAN			bVLANPkt;
-	int 			frameNum = 0;
-	PQUEUE_ENTRY	pQEntry;
-
-
-	ASSERT(pTxBlk);
-
-	ASSERT((pTxBlk->TxPacketList.Number > 1));
-
-	while(pTxBlk->TxPacketList.Head)
-	{
-		pQEntry = RemoveHeadQueue(&pTxBlk->TxPacketList);
-		pTxBlk->pPacket = QUEUE_ENTRY_TO_PACKET(pQEntry);
-		if (RTMP_FillTxBlkInfo(pAd, pTxBlk) != TRUE)
-		{
-			RELEASE_NDIS_PACKET(pAd, pTxBlk->pPacket, NDIS_STATUS_FAILURE);
-			continue;
-		}
-
-		bVLANPkt = (RTMP_GET_PACKET_VLAN(pTxBlk->pPacket) ? TRUE : FALSE);
-
-		// skip 802.3 header
-		pTxBlk->pSrcBufData = pTxBlk->pSrcBufHeader + LENGTH_802_3;
-		pTxBlk->SrcBufLen  -= LENGTH_802_3;
-
-		// skip vlan tag
-		if (bVLANPkt)
-		{
-			pTxBlk->pSrcBufData	+= LENGTH_802_1Q;
-			pTxBlk->SrcBufLen	-= LENGTH_802_1Q;
-		}
-
-		if (frameNum == 0)
-		{
-			pHeaderBufPtr = STA_Build_AMSDU_Frame_Header(pAd, pTxBlk);
-
-			// NOTE: TxWI->MPDUtotalByteCount will be updated after final frame was handled.
-			RTMPWriteTxWI_Data(pAd, (PTXWI_STRUC)(&pTxBlk->HeaderBuf[TXINFO_SIZE]), pTxBlk);
-		}
-		else
-		{
-			pHeaderBufPtr = &pTxBlk->HeaderBuf[0];
-			padding = ROUND_UP(LENGTH_AMSDU_SUBFRAMEHEAD + subFramePayloadLen, 4) - (LENGTH_AMSDU_SUBFRAMEHEAD + subFramePayloadLen);
-			NdisZeroMemory(pHeaderBufPtr, padding + LENGTH_AMSDU_SUBFRAMEHEAD);
-			pHeaderBufPtr += padding;
-			pTxBlk->MpduHeaderLen = padding;
-		}
-
-		//
-		// A-MSDU subframe
-		//   DA(6)+SA(6)+Length(2) + LLC/SNAP Encap
-		//
-		subFrameHeader = pHeaderBufPtr;
-		subFramePayloadLen = pTxBlk->SrcBufLen;
-
-		NdisMoveMemory(subFrameHeader, pTxBlk->pSrcBufHeader, 12);
-
-
-		pHeaderBufPtr += LENGTH_AMSDU_SUBFRAMEHEAD;
-		pTxBlk->MpduHeaderLen += LENGTH_AMSDU_SUBFRAMEHEAD;
-
-
-		//
-		// Insert LLC-SNAP encapsulation - 8 octets
-		//
-		EXTRA_LLCSNAP_ENCAP_FROM_PKT_OFFSET(pTxBlk->pSrcBufData-2, pTxBlk->pExtraLlcSnapEncap);
-
-		subFramePayloadLen = pTxBlk->SrcBufLen;
-
-		if (pTxBlk->pExtraLlcSnapEncap)
-		{
-			NdisMoveMemory(pHeaderBufPtr, pTxBlk->pExtraLlcSnapEncap, 6);
-			pHeaderBufPtr += 6;
-			// get 2 octets (TypeofLen)
-			NdisMoveMemory(pHeaderBufPtr, pTxBlk->pSrcBufData-2, 2);
-			pHeaderBufPtr += 2;
-			pTxBlk->MpduHeaderLen += LENGTH_802_1_H;
-			subFramePayloadLen += LENGTH_802_1_H;
-		}
-
-		// update subFrame Length field
-		subFrameHeader[12] = (subFramePayloadLen & 0xFF00) >> 8;
-		subFrameHeader[13] = subFramePayloadLen & 0xFF;
-
-		totalMPDUSize += pTxBlk->MpduHeaderLen + pTxBlk->SrcBufLen;
-
-		if (frameNum ==0)
-			FirstTx = HAL_WriteMultiTxResource(pAd, pTxBlk, frameNum, &FreeNumber);
-		else
-			LastTxIdx = HAL_WriteMultiTxResource(pAd, pTxBlk, frameNum, &FreeNumber);
-
-		frameNum++;
-
-		pAd->RalinkCounters.KickTxCount++;
-		pAd->RalinkCounters.OneSecTxDoneCount++;
-
-		// calculate Transmitted AMSDU Count and ByteCount
-		{
-			pAd->RalinkCounters.TransmittedAMSDUCount.u.LowPart ++;
-			pAd->RalinkCounters.TransmittedOctetsInAMSDU.QuadPart += totalMPDUSize;
-		}
-
-	}
-
-	HAL_FinalWriteTxResource(pAd, pTxBlk, totalMPDUSize, FirstTx);
-	HAL_LastTxIdx(pAd, pTxBlk->QueIdx, LastTxIdx);
-
-	//
-	// Kick out Tx
-	//
-	HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx);
-}
-#endif // DOT11_N_SUPPORT //
-
-VOID STA_Legacy_Frame_Tx(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk)
-{
-	HEADER_802_11	*pHeader_802_11;
-	PUCHAR			pHeaderBufPtr;
-	USHORT			FreeNumber;
-	BOOLEAN			bVLANPkt;
-	PQUEUE_ENTRY	pQEntry;
-
-	ASSERT(pTxBlk);
-
-
-	pQEntry = RemoveHeadQueue(&pTxBlk->TxPacketList);
-	pTxBlk->pPacket = QUEUE_ENTRY_TO_PACKET(pQEntry);
-	if (RTMP_FillTxBlkInfo(pAd, pTxBlk) != TRUE)
-	{
-		RELEASE_NDIS_PACKET(pAd, pTxBlk->pPacket, NDIS_STATUS_FAILURE);
-		return;
-	}
-
-	if (pTxBlk->TxFrameType == TX_MCAST_FRAME)
-	{
-		INC_COUNTER64(pAd->WlanCounters.MulticastTransmittedFrameCount);
-	}
-
-	if (RTMP_GET_PACKET_RTS(pTxBlk->pPacket))
-		TX_BLK_SET_FLAG(pTxBlk, fTX_bRtsRequired);
-	else
-		TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bRtsRequired);
-
-	bVLANPkt = (RTMP_GET_PACKET_VLAN(pTxBlk->pPacket) ? TRUE : FALSE);
-
-	if (pTxBlk->TxRate < pAd->CommonCfg.MinTxRate)
-		pTxBlk->TxRate = pAd->CommonCfg.MinTxRate;
-
-	STAFindCipherAlgorithm(pAd, pTxBlk);
-	STABuildCommon802_11Header(pAd, pTxBlk);
-
-
-	// skip 802.3 header
-	pTxBlk->pSrcBufData = pTxBlk->pSrcBufHeader + LENGTH_802_3;
-	pTxBlk->SrcBufLen  -= LENGTH_802_3;
-
-	// skip vlan tag
-	if (bVLANPkt)
-	{
-		pTxBlk->pSrcBufData	+= LENGTH_802_1Q;
-		pTxBlk->SrcBufLen	-= LENGTH_802_1Q;
-	}
-
-	pHeaderBufPtr = &pTxBlk->HeaderBuf[TXINFO_SIZE + TXWI_SIZE];
-	pHeader_802_11 = (HEADER_802_11 *) pHeaderBufPtr;
-
-	// skip common header
-	pHeaderBufPtr += pTxBlk->MpduHeaderLen;
-
-	if (TX_BLK_TEST_FLAG(pTxBlk, fTX_bWMM))
-	{
-		//
-		// build QOS Control bytes
-		//
-		*pHeaderBufPtr = (pTxBlk->UserPriority & 0x0F);
-		*(pHeaderBufPtr+1) = 0;
-		pHeaderBufPtr +=2;
-		pTxBlk->MpduHeaderLen += 2;
-	}
-
-	// The remaining content of MPDU header should locate at 4-octets aligment
-	pTxBlk->HdrPadLen = (ULONG)pHeaderBufPtr;
-	pHeaderBufPtr = (PCHAR) ROUND_UP(pHeaderBufPtr, 4);
-	pTxBlk->HdrPadLen = (ULONG)(pHeaderBufPtr - pTxBlk->HdrPadLen);
-
-	{
-
-		//
-		// Insert LLC-SNAP encapsulation - 8 octets
-		//
-		//
-   		// if original Ethernet frame contains no LLC/SNAP,
-		// then an extra LLC/SNAP encap is required
-		//
-		EXTRA_LLCSNAP_ENCAP_FROM_PKT_START(pTxBlk->pSrcBufHeader, pTxBlk->pExtraLlcSnapEncap);
-		if (pTxBlk->pExtraLlcSnapEncap)
-		{
-			UCHAR vlan_size;
-
-			NdisMoveMemory(pHeaderBufPtr, pTxBlk->pExtraLlcSnapEncap, 6);
-			pHeaderBufPtr += 6;
-			// skip vlan tag
-			vlan_size =  (bVLANPkt) ? LENGTH_802_1Q : 0;
-			// get 2 octets (TypeofLen)
-			NdisMoveMemory(pHeaderBufPtr, pTxBlk->pSrcBufHeader+12+vlan_size, 2);
-			pHeaderBufPtr += 2;
-			pTxBlk->MpduHeaderLen += LENGTH_802_1_H;
-		}
-
-	}
-
-	//
-	// prepare for TXWI
-	// use Wcid as Key Index
-	//
-
-	RTMPWriteTxWI_Data(pAd, (PTXWI_STRUC)(&pTxBlk->HeaderBuf[TXINFO_SIZE]), pTxBlk);
-
-	//FreeNumber = GET_TXRING_FREENO(pAd, QueIdx);
-
-	HAL_WriteTxResource(pAd, pTxBlk, TRUE, &FreeNumber);
-
-	pAd->RalinkCounters.KickTxCount++;
-	pAd->RalinkCounters.OneSecTxDoneCount++;
-
-	//
-	// Kick out Tx
-	//
-	HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx);
-}
-
-
-VOID STA_ARalink_Frame_Tx(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk)
-{
-	PUCHAR			pHeaderBufPtr;
-	USHORT			FreeNumber;
-	USHORT			totalMPDUSize=0;
-	USHORT			FirstTx, LastTxIdx;
-	int 			frameNum = 0;
-	BOOLEAN			bVLANPkt;
-	PQUEUE_ENTRY	pQEntry;
-
-
-	ASSERT(pTxBlk);
-
-	ASSERT((pTxBlk->TxPacketList.Number== 2));
-
-
-	FirstTx = LastTxIdx = 0;  // Is it ok init they as 0?
-	while(pTxBlk->TxPacketList.Head)
-	{
-		pQEntry = RemoveHeadQueue(&pTxBlk->TxPacketList);
-		pTxBlk->pPacket = QUEUE_ENTRY_TO_PACKET(pQEntry);
-
-		if (RTMP_FillTxBlkInfo(pAd, pTxBlk) != TRUE)
-		{
-			RELEASE_NDIS_PACKET(pAd, pTxBlk->pPacket, NDIS_STATUS_FAILURE);
-			continue;
-		}
-
-		bVLANPkt = (RTMP_GET_PACKET_VLAN(pTxBlk->pPacket) ? TRUE : FALSE);
-
-		// skip 802.3 header
-		pTxBlk->pSrcBufData = pTxBlk->pSrcBufHeader + LENGTH_802_3;
-		pTxBlk->SrcBufLen  -= LENGTH_802_3;
-
-		// skip vlan tag
-		if (bVLANPkt)
-		{
-			pTxBlk->pSrcBufData	+= LENGTH_802_1Q;
-			pTxBlk->SrcBufLen	-= LENGTH_802_1Q;
-		}
-
-		if (frameNum == 0)
-		{	// For first frame, we need to create the 802.11 header + padding(optional) + RA-AGG-LEN + SNAP Header
-
-			pHeaderBufPtr = STA_Build_ARalink_Frame_Header(pAd, pTxBlk);
-
-			// It's ok write the TxWI here, because the TxWI->MPDUtotalByteCount
-			//	will be updated after final frame was handled.
-			RTMPWriteTxWI_Data(pAd, (PTXWI_STRUC)(&pTxBlk->HeaderBuf[TXINFO_SIZE]), pTxBlk);
-
-
-			//
-			// Insert LLC-SNAP encapsulation - 8 octets
-			//
-			EXTRA_LLCSNAP_ENCAP_FROM_PKT_OFFSET(pTxBlk->pSrcBufData-2, pTxBlk->pExtraLlcSnapEncap);
-
-			if (pTxBlk->pExtraLlcSnapEncap)
-			{
-				NdisMoveMemory(pHeaderBufPtr, pTxBlk->pExtraLlcSnapEncap, 6);
-				pHeaderBufPtr += 6;
-				// get 2 octets (TypeofLen)
-				NdisMoveMemory(pHeaderBufPtr, pTxBlk->pSrcBufData-2, 2);
-				pHeaderBufPtr += 2;
-				pTxBlk->MpduHeaderLen += LENGTH_802_1_H;
-			}
-		}
-		else
-		{	// For second aggregated frame, we need create the 802.3 header to headerBuf, because PCI will copy it to SDPtr0.
-
-			pHeaderBufPtr = &pTxBlk->HeaderBuf[0];
-			pTxBlk->MpduHeaderLen = 0;
-
-			// A-Ralink sub-sequent frame header is the same as 802.3 header.
-			//   DA(6)+SA(6)+FrameType(2)
-			NdisMoveMemory(pHeaderBufPtr, pTxBlk->pSrcBufHeader, 12);
-			pHeaderBufPtr += 12;
-			// get 2 octets (TypeofLen)
-			NdisMoveMemory(pHeaderBufPtr, pTxBlk->pSrcBufData-2, 2);
-			pHeaderBufPtr += 2;
-			pTxBlk->MpduHeaderLen = LENGTH_ARALINK_SUBFRAMEHEAD;
-		}
-
-		totalMPDUSize += pTxBlk->MpduHeaderLen + pTxBlk->SrcBufLen;
-
-		//FreeNumber = GET_TXRING_FREENO(pAd, QueIdx);
-		if (frameNum ==0)
-			FirstTx = HAL_WriteMultiTxResource(pAd, pTxBlk, frameNum, &FreeNumber);
-		else
-			LastTxIdx = HAL_WriteMultiTxResource(pAd, pTxBlk, frameNum, &FreeNumber);
-
-		frameNum++;
-
-		pAd->RalinkCounters.OneSecTxAggregationCount++;
-		pAd->RalinkCounters.KickTxCount++;
-		pAd->RalinkCounters.OneSecTxDoneCount++;
-
-	}
-
-	HAL_FinalWriteTxResource(pAd, pTxBlk, totalMPDUSize, FirstTx);
-	HAL_LastTxIdx(pAd, pTxBlk->QueIdx, LastTxIdx);
-
-	//
-	// Kick out Tx
-	//
-	HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx);
-
-}
-
-
-VOID STA_Fragment_Frame_Tx(
-	IN RTMP_ADAPTER *pAd,
-	IN TX_BLK		*pTxBlk)
-{
-	HEADER_802_11	*pHeader_802_11;
-	PUCHAR			pHeaderBufPtr;
-	USHORT			FreeNumber;
-	UCHAR 			fragNum = 0;
-	PACKET_INFO		PacketInfo;
-	USHORT			EncryptionOverhead = 0;
-	UINT32			FreeMpduSize, SrcRemainingBytes;
-	USHORT			AckDuration;
-	UINT 			NextMpduSize;
-	BOOLEAN			bVLANPkt;
-	PQUEUE_ENTRY	pQEntry;
-
-
-	ASSERT(pTxBlk);
-
-	pQEntry = RemoveHeadQueue(&pTxBlk->TxPacketList);
-	pTxBlk->pPacket = QUEUE_ENTRY_TO_PACKET(pQEntry);
-	if (RTMP_FillTxBlkInfo(pAd, pTxBlk) != TRUE)
-	{
-		RELEASE_NDIS_PACKET(pAd, pTxBlk->pPacket, NDIS_STATUS_FAILURE);
-		return;
-	}
-
-	ASSERT(TX_BLK_TEST_FLAG(pTxBlk, fTX_bAllowFrag));
-	bVLANPkt = (RTMP_GET_PACKET_VLAN(pTxBlk->pPacket) ? TRUE : FALSE);
-
-	STAFindCipherAlgorithm(pAd, pTxBlk);
-	STABuildCommon802_11Header(pAd, pTxBlk);
-
-	if (pTxBlk->CipherAlg == CIPHER_TKIP)
-	{
-		pTxBlk->pPacket = duplicate_pkt_with_TKIP_MIC(pAd, pTxBlk->pPacket);
-		if (pTxBlk->pPacket == NULL)
-			return;
-		RTMP_QueryPacketInfo(pTxBlk->pPacket, &PacketInfo, &pTxBlk->pSrcBufHeader, &pTxBlk->SrcBufLen);
-	}
-
-	// skip 802.3 header
-	pTxBlk->pSrcBufData = pTxBlk->pSrcBufHeader + LENGTH_802_3;
-	pTxBlk->SrcBufLen  -= LENGTH_802_3;
-
-
-	// skip vlan tag
-	if (bVLANPkt)
-	{
-		pTxBlk->pSrcBufData	+= LENGTH_802_1Q;
-		pTxBlk->SrcBufLen	-= LENGTH_802_1Q;
-	}
-
-	pHeaderBufPtr = &pTxBlk->HeaderBuf[TXINFO_SIZE + TXWI_SIZE];
-	pHeader_802_11 = (HEADER_802_11 *)pHeaderBufPtr;
-
-
-	// skip common header
-	pHeaderBufPtr += pTxBlk->MpduHeaderLen;
-
-	if (TX_BLK_TEST_FLAG(pTxBlk, fTX_bWMM))
-	{
-		//
-		// build QOS Control bytes
-		//
-		*pHeaderBufPtr = (pTxBlk->UserPriority & 0x0F);
-
-		*(pHeaderBufPtr+1) = 0;
-		pHeaderBufPtr +=2;
-		pTxBlk->MpduHeaderLen += 2;
-	}
-
-	//
-	// padding at front of LLC header
-	// LLC header should locate at 4-octets aligment
-	//
-	pTxBlk->HdrPadLen = (ULONG)pHeaderBufPtr;
-	pHeaderBufPtr = (PCHAR) ROUND_UP(pHeaderBufPtr, 4);
-	pTxBlk->HdrPadLen = (ULONG)(pHeaderBufPtr - pTxBlk->HdrPadLen);
-
-
-
-	//
-	// Insert LLC-SNAP encapsulation - 8 octets
-	//
-	//
-   	// if original Ethernet frame contains no LLC/SNAP,
-	// then an extra LLC/SNAP encap is required
-	//
-	EXTRA_LLCSNAP_ENCAP_FROM_PKT_START(pTxBlk->pSrcBufHeader, pTxBlk->pExtraLlcSnapEncap);
-	if (pTxBlk->pExtraLlcSnapEncap)
-	{
-		UCHAR vlan_size;
-
-		NdisMoveMemory(pHeaderBufPtr, pTxBlk->pExtraLlcSnapEncap, 6);
-		pHeaderBufPtr += 6;
-		// skip vlan tag
-		vlan_size =  (bVLANPkt) ? LENGTH_802_1Q : 0;
-		// get 2 octets (TypeofLen)
-		NdisMoveMemory(pHeaderBufPtr, pTxBlk->pSrcBufHeader+12+vlan_size, 2);
-		pHeaderBufPtr += 2;
-		pTxBlk->MpduHeaderLen += LENGTH_802_1_H;
-	}
-
-
-	// If TKIP is used and fragmentation is required. Driver has to
-	//	append TKIP MIC at tail of the scatter buffer
-	//	MAC ASIC will only perform IV/EIV/ICV insertion but no TKIP MIC
-	if (pTxBlk->CipherAlg == CIPHER_TKIP)
-	{
-
-		// NOTE: DON'T refer the skb->len directly after following copy. Becasue the length is not adjust
-		//			to correct lenght, refer to pTxBlk->SrcBufLen for the packet length in following progress.
-		NdisMoveMemory(pTxBlk->pSrcBufData + pTxBlk->SrcBufLen, &pAd->PrivateInfo.Tx.MIC[0], 8);
-		//skb_put((RTPKT_TO_OSPKT(pTxBlk->pPacket))->tail, 8);
-		pTxBlk->SrcBufLen += 8;
-		pTxBlk->TotalFrameLen += 8;
-		pTxBlk->CipherAlg = CIPHER_TKIP_NO_MIC;
-	}
-
-	//
-	// calcuate the overhead bytes that encryption algorithm may add. This
-	// affects the calculate of "duration" field
-	//
-	if ((pTxBlk->CipherAlg == CIPHER_WEP64) || (pTxBlk->CipherAlg == CIPHER_WEP128))
-		EncryptionOverhead = 8; //WEP: IV[4] + ICV[4];
-	else if (pTxBlk->CipherAlg == CIPHER_TKIP_NO_MIC)
-		EncryptionOverhead = 12;//TKIP: IV[4] + EIV[4] + ICV[4], MIC will be added to TotalPacketLength
-	else if (pTxBlk->CipherAlg == CIPHER_TKIP)
-		EncryptionOverhead = 20;//TKIP: IV[4] + EIV[4] + ICV[4] + MIC[8]
-	else if (pTxBlk->CipherAlg == CIPHER_AES)
-		EncryptionOverhead = 16;	// AES: IV[4] + EIV[4] + MIC[8]
-	else
-		EncryptionOverhead = 0;
-
-	// decide how much time an ACK/CTS frame will consume in the air
-	AckDuration = RTMPCalcDuration(pAd, pAd->CommonCfg.ExpectedACKRate[pTxBlk->TxRate], 14);
-
-	// Init the total payload length of this frame.
-	SrcRemainingBytes = pTxBlk->SrcBufLen;
-
-	pTxBlk->TotalFragNum = 0xff;
-
-	do {
-
-		FreeMpduSize = pAd->CommonCfg.FragmentThreshold - LENGTH_CRC;
-
-		FreeMpduSize -= pTxBlk->MpduHeaderLen;
-
-		if (SrcRemainingBytes <= FreeMpduSize)
-		{	// this is the last or only fragment
-
-			pTxBlk->SrcBufLen = SrcRemainingBytes;
-
-			pHeader_802_11->FC.MoreFrag = 0;
-			pHeader_802_11->Duration = pAd->CommonCfg.Dsifs + AckDuration;
-
-			// Indicate the lower layer that this's the last fragment.
-			pTxBlk->TotalFragNum = fragNum;
-		}
-		else
-		{	// more fragment is required
-
-			pTxBlk->SrcBufLen = FreeMpduSize;
-
-			NextMpduSize = min(((UINT)SrcRemainingBytes - pTxBlk->SrcBufLen), ((UINT)pAd->CommonCfg.FragmentThreshold));
-			pHeader_802_11->FC.MoreFrag = 1;
-			pHeader_802_11->Duration = (3 * pAd->CommonCfg.Dsifs) + (2 * AckDuration) + RTMPCalcDuration(pAd, pTxBlk->TxRate, NextMpduSize + EncryptionOverhead);
-		}
-
-		if (fragNum == 0)
-			pTxBlk->FrameGap = IFS_HTTXOP;
-		else
-			pTxBlk->FrameGap = IFS_SIFS;
-
-		RTMPWriteTxWI_Data(pAd, (PTXWI_STRUC)(&pTxBlk->HeaderBuf[TXINFO_SIZE]), pTxBlk);
-
-		HAL_WriteFragTxResource(pAd, pTxBlk, fragNum, &FreeNumber);
-
-		pAd->RalinkCounters.KickTxCount++;
-		pAd->RalinkCounters.OneSecTxDoneCount++;
-
-		// Update the frame number, remaining size of the NDIS packet payload.
-
-		// space for 802.11 header.
-		if (fragNum == 0 && pTxBlk->pExtraLlcSnapEncap)
-			pTxBlk->MpduHeaderLen -= LENGTH_802_1_H;
-
-		fragNum++;
-		SrcRemainingBytes -= pTxBlk->SrcBufLen;
-		pTxBlk->pSrcBufData += pTxBlk->SrcBufLen;
-
-		pHeader_802_11->Frag++;	 // increase Frag #
-
-	}while(SrcRemainingBytes > 0);
-
-	//
-	// Kick out Tx
-	//
-	HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx);
-}
-
-
-#define RELEASE_FRAMES_OF_TXBLK(_pAd, _pTxBlk, _pQEntry, _Status) 										\
-		while(_pTxBlk->TxPacketList.Head)														\
-		{																						\
-			_pQEntry = RemoveHeadQueue(&_pTxBlk->TxPacketList);									\
-			RELEASE_NDIS_PACKET(_pAd, QUEUE_ENTRY_TO_PACKET(_pQEntry), _Status);	\
-		}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Copy frame from waiting queue into relative ring buffer and set
-	appropriate ASIC register to kick hardware encryption before really
-	sent out to air.
-
-	Arguments:
-		pAd 	Pointer to our adapter
-		PNDIS_PACKET	Pointer to outgoing Ndis frame
-		NumberOfFrag	Number of fragment required
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-NDIS_STATUS STAHardTransmit(
-	IN PRTMP_ADAPTER	pAd,
-	IN TX_BLK 			*pTxBlk,
-	IN	UCHAR			QueIdx)
-{
-	NDIS_PACKET		*pPacket;
-	PQUEUE_ENTRY	pQEntry;
-
-	// ---------------------------------------------
-	// STEP 0. DO SANITY CHECK AND SOME EARLY PREPARATION.
-	// ---------------------------------------------
-	//
-	ASSERT(pTxBlk->TxPacketList.Number);
-	if (pTxBlk->TxPacketList.Head == NULL)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("pTxBlk->TotalFrameNum == %ld!\n", pTxBlk->TxPacketList.Number));
-		return NDIS_STATUS_FAILURE;
-	}
-
-	pPacket = QUEUE_ENTRY_TO_PACKET(pTxBlk->TxPacketList.Head);
-
-	// ------------------------------------------------------------------
-	// STEP 1. WAKE UP PHY
-	//		outgoing frame always wakeup PHY to prevent frame lost and
-	//		turn off PSM bit to improve performance
-	// ------------------------------------------------------------------
-	// not to change PSM bit, just send this frame out?
-	if ((pAd->StaCfg.Psm == PWR_SAVE) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
-	{
-	    DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicForceWakeup At HardTx\n"));
-		AsicForceWakeup(pAd, TRUE);
-	}
-
-	// It should not change PSM bit, when APSD turn on.
-	if ((!(pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable) && (pAd->CommonCfg.bAPSDForcePowerSave == FALSE))
-		|| (RTMP_GET_PACKET_EAPOL(pTxBlk->pPacket))
-		|| (RTMP_GET_PACKET_WAI(pTxBlk->pPacket)))
-	{
-		if ((pAd->StaCfg.Psm == PWR_SAVE) &&
-            (pAd->StaCfg.WindowsPowerMode == Ndis802_11PowerModeFast_PSP))
-			MlmeSetPsmBit(pAd, PWR_ACTIVE);
-	}
-
-	switch (pTxBlk->TxFrameType)
-	{
-#ifdef DOT11_N_SUPPORT
-		case TX_AMPDU_FRAME:
-				STA_AMPDU_Frame_Tx(pAd, pTxBlk);
-			break;
-		case TX_AMSDU_FRAME:
-				STA_AMSDU_Frame_Tx(pAd, pTxBlk);
-			break;
-#endif // DOT11_N_SUPPORT //
-		case TX_LEGACY_FRAME:
-				STA_Legacy_Frame_Tx(pAd, pTxBlk);
-			break;
-		case TX_MCAST_FRAME:
-				STA_Legacy_Frame_Tx(pAd, pTxBlk);
-			break;
-		case TX_RALINK_FRAME:
-				STA_ARalink_Frame_Tx(pAd, pTxBlk);
-			break;
-		case TX_FRAG_FRAME:
-				STA_Fragment_Frame_Tx(pAd, pTxBlk);
-			break;
-		default:
-			{
-				// It should not happened!
-				DBGPRINT(RT_DEBUG_ERROR, ("Send a pacekt was not classified!! It should not happen!\n"));
-				while(pTxBlk->TxPacketList.Number)
-				{
-					pQEntry = RemoveHeadQueue(&pTxBlk->TxPacketList);
-					pPacket = QUEUE_ENTRY_TO_PACKET(pQEntry);
-					if (pPacket)
-						RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
-				}
-			}
-			break;
-	}
-
-	return (NDIS_STATUS_SUCCESS);
-
-}
-
-ULONG  HashBytesPolynomial(UCHAR *value, unsigned int len)
-{
-   unsigned char *word = value;
-   unsigned int ret = 0;
-   unsigned int i;
-
-   for(i=0; i < len; i++)
-   {
-	  int mod = i % 32;
-	  ret ^=(unsigned int) (word[i]) << mod;
-	  ret ^=(unsigned int) (word[i]) >> (32 - mod);
-   }
-   return ret;
-}
-
-VOID Sta_Announce_or_Forward_802_3_Packet(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PNDIS_PACKET	pPacket,
-	IN	UCHAR			FromWhichBSSID)
-{
-	if (TRUE
-		)
-	{
-		announce_802_3_packet(pAd, pPacket);
-	}
-	else
-	{
-		// release packet
-		RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
-	}
-}
-
+#include "../../rt2870/sta/rtmp_data.c"
diff --git a/drivers/staging/rt3070/sta/sanity.c b/drivers/staging/rt3070/sta/sanity.c
index 239872464be..b4954779b31 100644
--- a/drivers/staging/rt3070/sta/sanity.c
+++ b/drivers/staging/rt3070/sta/sanity.c
@@ -1,420 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	sanity.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	John Chang  2004-09-01      add WMM support
-*/
-#include "../rt_config.h"
-
-extern UCHAR	CISCO_OUI[];
-
-extern UCHAR	WPA_OUI[];
-extern UCHAR	RSN_OUI[];
-extern UCHAR	WME_INFO_ELEM[];
-extern UCHAR	WME_PARM_ELEM[];
-extern UCHAR	Ccx2QosInfo[];
-extern UCHAR	RALINK_OUI[];
-extern UCHAR	BROADCOM_OUI[];
-
-/*
-    ==========================================================================
-    Description:
-        MLME message sanity check
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
- */
-BOOLEAN MlmeStartReqSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT CHAR Ssid[],
-    OUT UCHAR *pSsidLen)
-{
-    MLME_START_REQ_STRUCT *Info;
-
-    Info = (MLME_START_REQ_STRUCT *)(Msg);
-
-    if (Info->SsidLen > MAX_LEN_OF_SSID)
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("MlmeStartReqSanity fail - wrong SSID length\n"));
-        return FALSE;
-    }
-
-    *pSsidLen = Info->SsidLen;
-    NdisMoveMemory(Ssid, Info->Ssid, *pSsidLen);
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        MLME message sanity check
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-
-    IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-BOOLEAN PeerAssocRspSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *pMsg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pAddr2,
-    OUT USHORT *pCapabilityInfo,
-    OUT USHORT *pStatus,
-    OUT USHORT *pAid,
-    OUT UCHAR SupRate[],
-    OUT UCHAR *pSupRateLen,
-    OUT UCHAR ExtRate[],
-    OUT UCHAR *pExtRateLen,
-    OUT HT_CAPABILITY_IE		*pHtCapability,
-    OUT ADD_HT_INFO_IE		*pAddHtInfo,	// AP might use this additional ht info IE
-    OUT UCHAR			*pHtCapabilityLen,
-    OUT UCHAR			*pAddHtInfoLen,
-    OUT UCHAR			*pNewExtChannelOffset,
-    OUT PEDCA_PARM pEdcaParm,
-    OUT UCHAR *pCkipFlag)
-{
-    CHAR          IeType, *Ptr;
-    PFRAME_802_11 pFrame = (PFRAME_802_11)pMsg;
-    PEID_STRUCT   pEid;
-    ULONG         Length = 0;
-
-	*pNewExtChannelOffset = 0xff;
-	*pHtCapabilityLen = 0;
-	*pAddHtInfoLen = 0;
-    COPY_MAC_ADDR(pAddr2, pFrame->Hdr.Addr2);
-    Ptr = pFrame->Octet;
-    Length += LENGTH_802_11;
-
-    NdisMoveMemory(pCapabilityInfo, &pFrame->Octet[0], 2);
-    Length += 2;
-    NdisMoveMemory(pStatus,         &pFrame->Octet[2], 2);
-    Length += 2;
-    *pCkipFlag = 0;
-    *pExtRateLen = 0;
-    pEdcaParm->bValid = FALSE;
-
-    if (*pStatus != MLME_SUCCESS)
-        return TRUE;
-
-    NdisMoveMemory(pAid, &pFrame->Octet[4], 2);
-    Length += 2;
-
-    // Aid already swaped byte order in RTMPFrameEndianChange() for big endian platform
-    *pAid = (*pAid) & 0x3fff; // AID is low 14-bit
-
-    // -- get supported rates from payload and advance the pointer
-    IeType = pFrame->Octet[6];
-    *pSupRateLen = pFrame->Octet[7];
-    if ((IeType != IE_SUPP_RATES) || (*pSupRateLen > MAX_LEN_OF_SUPPORTED_RATES))
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("PeerAssocRspSanity fail - wrong SupportedRates IE\n"));
-        return FALSE;
-    }
-    else
-        NdisMoveMemory(SupRate, &pFrame->Octet[8], *pSupRateLen);
-
-    Length = Length + 2 + *pSupRateLen;
-
-    // many AP implement proprietary IEs in non-standard order, we'd better
-    // tolerate mis-ordered IEs to get best compatibility
-    pEid = (PEID_STRUCT) &pFrame->Octet[8 + (*pSupRateLen)];
-
-    // get variable fields from payload and advance the pointer
-    while ((Length + 2 + pEid->Len) <= MsgLen)
-    {
-        switch (pEid->Eid)
-        {
-            case IE_EXT_SUPP_RATES:
-                if (pEid->Len <= MAX_LEN_OF_SUPPORTED_RATES)
-                {
-                    NdisMoveMemory(ExtRate, pEid->Octet, pEid->Len);
-                    *pExtRateLen = pEid->Len;
-                }
-                break;
-
-             case IE_HT_CAP:
-            case IE_HT_CAP2:
-			if (pEid->Len >= SIZE_HT_CAP_IE)  //Note: allow extension.!!
-			{
-				NdisMoveMemory(pHtCapability, pEid->Octet, SIZE_HT_CAP_IE);
-
-				*(USHORT *)(&pHtCapability->HtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->HtCapInfo));
-				*(USHORT *)(&pHtCapability->ExtHtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->ExtHtCapInfo));
-
-				*pHtCapabilityLen = SIZE_HT_CAP_IE;
-			}
-			else
-			{
-				DBGPRINT(RT_DEBUG_WARN, ("PeerAssocRspSanity - wrong IE_HT_CAP. \n"));
-			}
-
-		break;
-#ifdef DOT11_N_SUPPORT
-            case IE_ADD_HT:
-            case IE_ADD_HT2:
-			if (pEid->Len >= sizeof(ADD_HT_INFO_IE))
-			{
-				// This IE allows extension, but we can ignore extra bytes beyond our knowledge , so only
-				// copy first sizeof(ADD_HT_INFO_IE)
-				NdisMoveMemory(pAddHtInfo, pEid->Octet, sizeof(ADD_HT_INFO_IE));
-
-				*(USHORT *)(&pAddHtInfo->AddHtInfo2) = cpu2le16(*(USHORT *)(&pAddHtInfo->AddHtInfo2));
-				*(USHORT *)(&pAddHtInfo->AddHtInfo3) = cpu2le16(*(USHORT *)(&pAddHtInfo->AddHtInfo3));
-
-				*pAddHtInfoLen = SIZE_ADD_HT_INFO_IE;
-			}
-			else
-			{
-				DBGPRINT(RT_DEBUG_WARN, ("PeerAssocRspSanity - wrong IE_ADD_HT. \n"));
-			}
-
-		break;
-            case IE_SECONDARY_CH_OFFSET:
-			if (pEid->Len == 1)
-			{
-				*pNewExtChannelOffset = pEid->Octet[0];
-			}
-			else
-			{
-				DBGPRINT(RT_DEBUG_WARN, ("PeerAssocRspSanity - wrong IE_SECONDARY_CH_OFFSET. \n"));
-			}
-#endif // DOT11_N_SUPPORT //
-		break;
-            case IE_AIRONET_CKIP:
-                // 0. Check Aironet IE length, it must be larger or equal to 28
-                //    Cisco's AP VxWork version(will not be supported) used this IE length as 28
-                //    Cisco's AP IOS version used this IE length as 30
-                if (pEid->Len < (CKIP_NEGOTIATION_LENGTH - 2))
-                break;
-
-                // 1. Copy CKIP flag byte to buffer for process
-                *pCkipFlag = *(pEid->Octet + 8);
-                break;
-
-            case IE_AIRONET_IPADDRESS:
-                if (pEid->Len != 0x0A)
-                break;
-
-                // Get Cisco Aironet IP information
-                if (NdisEqualMemory(pEid->Octet, CISCO_OUI, 3) == 1)
-                    NdisMoveMemory(pAd->StaCfg.AironetIPAddress, pEid->Octet + 4, 4);
-                break;
-
-            // CCX2, WMM use the same IE value
-            // case IE_CCX_V2:
-            case IE_VENDOR_SPECIFIC:
-                // handle WME PARAMTER ELEMENT
-                if (NdisEqualMemory(pEid->Octet, WME_PARM_ELEM, 6) && (pEid->Len == 24))
-                {
-                    PUCHAR ptr;
-                    int i;
-
-                    // parsing EDCA parameters
-                    pEdcaParm->bValid          = TRUE;
-                    pEdcaParm->bQAck           = FALSE; // pEid->Octet[0] & 0x10;
-                    pEdcaParm->bQueueRequest   = FALSE; // pEid->Octet[0] & 0x20;
-                    pEdcaParm->bTxopRequest    = FALSE; // pEid->Octet[0] & 0x40;
-                    //pEdcaParm->bMoreDataAck    = FALSE; // pEid->Octet[0] & 0x80;
-                    pEdcaParm->EdcaUpdateCount = pEid->Octet[6] & 0x0f;
-                    pEdcaParm->bAPSDCapable    = (pEid->Octet[6] & 0x80) ? 1 : 0;
-                    ptr = &pEid->Octet[8];
-                    for (i=0; i<4; i++)
-                    {
-                        UCHAR aci = (*ptr & 0x60) >> 5; // b5~6 is AC INDEX
-                        pEdcaParm->bACM[aci]  = (((*ptr) & 0x10) == 0x10);   // b5 is ACM
-                        pEdcaParm->Aifsn[aci] = (*ptr) & 0x0f;               // b0~3 is AIFSN
-                        pEdcaParm->Cwmin[aci] = *(ptr+1) & 0x0f;             // b0~4 is Cwmin
-                        pEdcaParm->Cwmax[aci] = *(ptr+1) >> 4;               // b5~8 is Cwmax
-                        pEdcaParm->Txop[aci]  = *(ptr+2) + 256 * (*(ptr+3)); // in unit of 32-us
-                        ptr += 4; // point to next AC
-                    }
-                }
-
-                // handle CCX IE
-                else
-                {
-                    // 0. Check the size and CCX admin control
-                    if (pAd->StaCfg.CCXControl.field.Enable == 0)
-                        break;
-                    if (pEid->Len != 5)
-                        break;
-
-                    // Turn CCX2 if matched
-                    if (NdisEqualMemory(pEid->Octet, Ccx2IeInfo, 5) == 1)
-                        pAd->StaCfg.CCXEnable = TRUE;
-                    break;
-                }
-                break;
-
-            default:
-                DBGPRINT(RT_DEBUG_TRACE, ("PeerAssocRspSanity - ignore unrecognized EID = %d\n", pEid->Eid));
-                break;
-        }
-
-        Length = Length + 2 + pEid->Len;
-        pEid = (PEID_STRUCT)((UCHAR*)pEid + 2 + pEid->Len);
-    }
-
-    // Force CCX2 enable to TRUE for those AP didn't replay CCX v2 IE, we still force it to be on
-    if (pAd->StaCfg.CCXControl.field.Enable == 1)
-        pAd->StaCfg.CCXEnable = TRUE;
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        MLME message sanity check
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-BOOLEAN PeerProbeReqSanity(
-    IN PRTMP_ADAPTER pAd,
-    IN VOID *Msg,
-    IN ULONG MsgLen,
-    OUT PUCHAR pAddr2,
-    OUT CHAR Ssid[],
-    OUT UCHAR *pSsidLen)
-{
-    UCHAR         Idx;
-    UCHAR	      RateLen;
-    CHAR          IeType;
-    PFRAME_802_11 pFrame = (PFRAME_802_11)Msg;
-
-    COPY_MAC_ADDR(pAddr2, pFrame->Hdr.Addr2);
-
-    if ((pFrame->Octet[0] != IE_SSID) || (pFrame->Octet[1] > MAX_LEN_OF_SSID))
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("PeerProbeReqSanity fail - wrong SSID IE(Type=%d,Len=%d)\n",pFrame->Octet[0],pFrame->Octet[1]));
-        return FALSE;
-    }
-
-    *pSsidLen = pFrame->Octet[1];
-    NdisMoveMemory(Ssid, &pFrame->Octet[2], *pSsidLen);
-
-    Idx = *pSsidLen + 2;
-
-    // -- get supported rates from payload and advance the pointer
-    IeType = pFrame->Octet[Idx];
-    RateLen = pFrame->Octet[Idx + 1];
-    if (IeType != IE_SUPP_RATES)
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("PeerProbeReqSanity fail - wrong SupportRates IE(Type=%d,Len=%d)\n",pFrame->Octet[Idx],pFrame->Octet[Idx+1]));
-        return FALSE;
-    }
-    else
-    {
-        if ((pAd->CommonCfg.PhyMode == PHY_11G) && (RateLen < 8))
-            return (FALSE);
-    }
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-
-	IRQL = DISPATCH_LEVEL
-
-    ==========================================================================
- */
-BOOLEAN GetTimBit(
-    IN CHAR *Ptr,
-    IN USHORT Aid,
-    OUT UCHAR *TimLen,
-    OUT UCHAR *BcastFlag,
-    OUT UCHAR *DtimCount,
-    OUT UCHAR *DtimPeriod,
-    OUT UCHAR *MessageToMe)
-{
-    UCHAR          BitCntl, N1, N2, MyByte, MyBit;
-    CHAR          *IdxPtr;
-
-    IdxPtr = Ptr;
-
-    IdxPtr ++;
-    *TimLen = *IdxPtr;
-
-    // get DTIM Count from TIM element
-    IdxPtr ++;
-    *DtimCount = *IdxPtr;
-
-    // get DTIM Period from TIM element
-    IdxPtr++;
-    *DtimPeriod = *IdxPtr;
-
-    // get Bitmap Control from TIM element
-    IdxPtr++;
-    BitCntl = *IdxPtr;
-
-    if ((*DtimCount == 0) && (BitCntl & 0x01))
-        *BcastFlag = TRUE;
-    else
-        *BcastFlag = FALSE;
-
-    // Parse Partial Virtual Bitmap from TIM element
-    N1 = BitCntl & 0xfe;    // N1 is the first bitmap byte#
-    N2 = *TimLen - 4 + N1;  // N2 is the last bitmap byte#
-
-    if ((Aid < (N1 << 3)) || (Aid >= ((N2 + 1) << 3)))
-        *MessageToMe = FALSE;
-    else
-    {
-        MyByte = (Aid >> 3) - N1;                       // my byte position in the bitmap byte-stream
-        MyBit = Aid % 16 - ((MyByte & 0x01)? 8:0);
-
-        IdxPtr += (MyByte + 1);
-
-        //if (*IdxPtr)
-        //    DBGPRINT(RT_DEBUG_WARN, ("TIM bitmap = 0x%02x\n", *IdxPtr));
-
-        if (*IdxPtr & (0x01 << MyBit))
-            *MessageToMe = TRUE;
-        else
-            *MessageToMe = FALSE;
-    }
-
-    return TRUE;
-}
-
+#include "../../rt2870/sta/sanity.c"
diff --git a/drivers/staging/rt3070/sta/sync.c b/drivers/staging/rt3070/sta/sync.c
index 2b5b3b07661..b7b8eb4f446 100644
--- a/drivers/staging/rt3070/sta/sync.c
+++ b/drivers/staging/rt3070/sta/sync.c
@@ -1,1755 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	sync.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	John Chang	2004-09-01      modified for rt2561/2661
-	Jan Lee		2006-08-01      modified for rt2860 for 802.11n
-*/
-#include "../rt_config.h"
-
-#define ADHOC_ENTRY_BEACON_LOST_TIME	(2*OS_HZ)	// 2 sec
-
-/*
-	==========================================================================
-	Description:
-		The sync state machine,
-	Parameters:
-		Sm - pointer to the state machine
-	Note:
-		the state machine looks like the following
-
-	==========================================================================
- */
-VOID SyncStateMachineInit(
-	IN PRTMP_ADAPTER pAd,
-	IN STATE_MACHINE *Sm,
-	OUT STATE_MACHINE_FUNC Trans[])
-{
-	StateMachineInit(Sm, Trans, MAX_SYNC_STATE, MAX_SYNC_MSG, (STATE_MACHINE_FUNC)Drop, SYNC_IDLE, SYNC_MACHINE_BASE);
-
-	// column 1
-	StateMachineSetAction(Sm, SYNC_IDLE, MT2_MLME_SCAN_REQ, (STATE_MACHINE_FUNC)MlmeScanReqAction);
-	StateMachineSetAction(Sm, SYNC_IDLE, MT2_MLME_JOIN_REQ, (STATE_MACHINE_FUNC)MlmeJoinReqAction);
-	StateMachineSetAction(Sm, SYNC_IDLE, MT2_MLME_START_REQ, (STATE_MACHINE_FUNC)MlmeStartReqAction);
-	StateMachineSetAction(Sm, SYNC_IDLE, MT2_PEER_BEACON, (STATE_MACHINE_FUNC)PeerBeacon);
-	StateMachineSetAction(Sm, SYNC_IDLE, MT2_PEER_PROBE_REQ, (STATE_MACHINE_FUNC)PeerProbeReqAction);
-
-	//column 2
-	StateMachineSetAction(Sm, JOIN_WAIT_BEACON, MT2_MLME_SCAN_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenScan);
-	StateMachineSetAction(Sm, JOIN_WAIT_BEACON, MT2_MLME_JOIN_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenJoin);
-	StateMachineSetAction(Sm, JOIN_WAIT_BEACON, MT2_MLME_START_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenStart);
-	StateMachineSetAction(Sm, JOIN_WAIT_BEACON, MT2_PEER_BEACON, (STATE_MACHINE_FUNC)PeerBeaconAtJoinAction);
-	StateMachineSetAction(Sm, JOIN_WAIT_BEACON, MT2_BEACON_TIMEOUT, (STATE_MACHINE_FUNC)BeaconTimeoutAtJoinAction);
-
-	// column 3
-	StateMachineSetAction(Sm, SCAN_LISTEN, MT2_MLME_SCAN_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenScan);
-	StateMachineSetAction(Sm, SCAN_LISTEN, MT2_MLME_JOIN_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenJoin);
-	StateMachineSetAction(Sm, SCAN_LISTEN, MT2_MLME_START_REQ, (STATE_MACHINE_FUNC)InvalidStateWhenStart);
-	StateMachineSetAction(Sm, SCAN_LISTEN, MT2_PEER_BEACON, (STATE_MACHINE_FUNC)PeerBeaconAtScanAction);
-	StateMachineSetAction(Sm, SCAN_LISTEN, MT2_PEER_PROBE_RSP, (STATE_MACHINE_FUNC)PeerBeaconAtScanAction);
-	StateMachineSetAction(Sm, SCAN_LISTEN, MT2_SCAN_TIMEOUT, (STATE_MACHINE_FUNC)ScanTimeoutAction);
-
-	// timer init
-	RTMPInitTimer(pAd, &pAd->MlmeAux.BeaconTimer, GET_TIMER_FUNCTION(BeaconTimeout), pAd, FALSE);
-	RTMPInitTimer(pAd, &pAd->MlmeAux.ScanTimer, GET_TIMER_FUNCTION(ScanTimeout), pAd, FALSE);
-}
-
-/*
-	==========================================================================
-	Description:
-		Beacon timeout handler, executed in timer thread
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID BeaconTimeout(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3)
-{
-	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;
-
-	DBGPRINT(RT_DEBUG_TRACE,("SYNC - BeaconTimeout\n"));
-
-	// Do nothing if the driver is starting halt state.
-	// This might happen when timer already been fired before cancel timer with mlmehalt
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS))
-		return;
-
-#ifdef DOT11_N_SUPPORT
-	if ((pAd->CommonCfg.BBPCurrentBW == BW_40)
-		)
-	{
-		UCHAR        BBPValue = 0;
-		AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
-		AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
-		BBPValue &= (~0x18);
-		BBPValue |= 0x10;
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
-		DBGPRINT(RT_DEBUG_TRACE, ("SYNC - End of SCAN, restore to 40MHz channel %d, Total BSS[%02d]\n",pAd->CommonCfg.CentralChannel, pAd->ScanTab.BssNr));
-	}
-#endif // DOT11_N_SUPPORT //
-
-	MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_BEACON_TIMEOUT, 0, NULL);
-	RT28XX_MLME_HANDLER(pAd);
-}
-
-/*
-	==========================================================================
-	Description:
-		Scan timeout handler, executed in timer thread
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID ScanTimeout(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3)
-{
-	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;
-
-
-	// Do nothing if the driver is starting halt state.
-	// This might happen when timer already been fired before cancel timer with mlmehalt
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS))
-		return;
-
-	if (MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_SCAN_TIMEOUT, 0, NULL))
-	{
-		RT28XX_MLME_HANDLER(pAd);
-	}
-	else
-	{
-		// To prevent SyncMachine.CurrState is SCAN_LISTEN forever.
-		pAd->MlmeAux.Channel = 0;
-		ScanNextChannel(pAd);
-		if (pAd->CommonCfg.bWirelessEvent)
-		{
-			RTMPSendWirelessEvent(pAd, IW_SCAN_ENQUEUE_FAIL_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-		}
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-		MLME SCAN req state machine procedure
-	==========================================================================
- */
-VOID MlmeScanReqAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR          Ssid[MAX_LEN_OF_SSID], SsidLen, ScanType, BssType, BBPValue = 0;
-	BOOLEAN        TimerCancelled;
-	ULONG		   Now;
-	USHORT         Status;
-	PHEADER_802_11 pHdr80211;
-	PUCHAR         pOutBuffer = NULL;
-	NDIS_STATUS    NStatus;
-
-	// Check the total scan tries for one single OID command
-	// If this is the CCX 2.0 Case, skip that!
-	if ( !RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP))
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("SYNC - MlmeScanReqAction before Startup\n"));
-		return;
-	}
-
-	// Increase the scan retry counters.
-	pAd->StaCfg.ScanCnt++;
-
-
-	// first check the parameter sanity
-	if (MlmeScanReqSanity(pAd,
-						  Elem->Msg,
-						  Elem->MsgLen,
-						  &BssType,
-						  Ssid,
-						  &SsidLen,
-						  &ScanType))
-	{
-
-		// Check for channel load and noise hist request
-		// Suspend MSDU only at scan request, not the last two mentioned
-		if ((ScanType == SCAN_CISCO_NOISE) || (ScanType == SCAN_CISCO_CHANNEL_LOAD))
-		{
-			if (pAd->StaCfg.CCXScanChannel != pAd->CommonCfg.Channel)
-				RTMPSuspendMsduTransmission(pAd);			// Suspend MSDU transmission here
-		}
-		else
-		{
-			// Suspend MSDU transmission here
-			RTMPSuspendMsduTransmission(pAd);
-		}
-
-		//
-		// To prevent data lost.
-		// Send an NULL data with turned PSM bit on to current associated AP before SCAN progress.
-		// And should send an NULL data with turned PSM bit off to AP, when scan progress done
-		//
-		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) && (INFRA_ON(pAd)))
-		{
-			NStatus = MlmeAllocateMemory(pAd, (PVOID)&pOutBuffer);
-			if (NStatus	== NDIS_STATUS_SUCCESS)
-			{
-				pHdr80211 = (PHEADER_802_11) pOutBuffer;
-				MgtMacHeaderInit(pAd, pHdr80211, SUBTYPE_NULL_FUNC, 1, pAd->CommonCfg.Bssid, pAd->CommonCfg.Bssid);
-				pHdr80211->Duration = 0;
-				pHdr80211->FC.Type = BTYPE_DATA;
-				pHdr80211->FC.PwrMgmt = PWR_SAVE;
-
-				// Send using priority queue
-				MiniportMMRequest(pAd, 0, pOutBuffer, sizeof(HEADER_802_11));
-				DBGPRINT(RT_DEBUG_TRACE, ("MlmeScanReqAction -- Send PSM Data frame for off channel RM\n"));
-				MlmeFreeMemory(pAd, pOutBuffer);
-				RTMPusecDelay(5000);
-			}
-		}
-
-		NdisGetSystemUpTime(&Now);
-		pAd->StaCfg.LastScanTime = Now;
-		// reset all the timers
-		RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer, &TimerCancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &TimerCancelled);
-
-		// record desired BSS parameters
-		pAd->MlmeAux.BssType = BssType;
-		pAd->MlmeAux.ScanType = ScanType;
-		pAd->MlmeAux.SsidLen = SsidLen;
-        NdisZeroMemory(pAd->MlmeAux.Ssid, MAX_LEN_OF_SSID);
-		NdisMoveMemory(pAd->MlmeAux.Ssid, Ssid, SsidLen);
-
-		// start from the first channel
-		pAd->MlmeAux.Channel = FirstChannel(pAd);
-
-		// Change the scan channel when dealing with CCX beacon report
-		if ((ScanType == SCAN_CISCO_PASSIVE) || (ScanType == SCAN_CISCO_ACTIVE) ||
-			(ScanType == SCAN_CISCO_CHANNEL_LOAD) || (ScanType == SCAN_CISCO_NOISE))
-			pAd->MlmeAux.Channel = pAd->StaCfg.CCXScanChannel;
-
-		// Let BBP register at 20MHz to do scan
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
-		BBPValue &= (~0x18);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
-		DBGPRINT(RT_DEBUG_TRACE, ("SYNC - BBP R4 to 20MHz.l\n"));
-		ScanNextChannel(pAd);
-	}
-	else
-	{
-		DBGPRINT_ERR(("SYNC - MlmeScanReqAction() sanity check fail\n"));
-		pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
-		Status = MLME_INVALID_FORMAT;
-		MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_SCAN_CONF, 2, &Status);
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-		MLME JOIN req state machine procedure
-	==========================================================================
- */
-VOID MlmeJoinReqAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR        BBPValue = 0;
-	BSS_ENTRY    *pBss;
-	BOOLEAN       TimerCancelled;
-	HEADER_802_11 Hdr80211;
-	NDIS_STATUS   NStatus;
-	ULONG         FrameLen = 0;
-	PUCHAR        pOutBuffer = NULL;
-	PUCHAR        pSupRate = NULL;
-	UCHAR         SupRateLen;
-	PUCHAR        pExtRate = NULL;
-	UCHAR         ExtRateLen;
-	UCHAR         ASupRate[] = {0x8C, 0x12, 0x98, 0x24, 0xb0, 0x48, 0x60, 0x6C};
-	UCHAR         ASupRateLen = sizeof(ASupRate)/sizeof(UCHAR);
-	MLME_JOIN_REQ_STRUCT *pInfo = (MLME_JOIN_REQ_STRUCT *)(Elem->Msg);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("SYNC - MlmeJoinReqAction(BSS #%ld)\n", pInfo->BssIdx));
-
-
-	// reset all the timers
-	RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &TimerCancelled);
-	RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer, &TimerCancelled);
-
-	pBss = &pAd->MlmeAux.SsidBssTab.BssEntry[pInfo->BssIdx];
-
-	// record the desired SSID & BSSID we're waiting for
-	COPY_MAC_ADDR(pAd->MlmeAux.Bssid, pBss->Bssid);
-
-	// If AP's SSID is not hidden, it is OK for updating ssid to MlmeAux again.
-	if (pBss->Hidden == 0)
-	{
-		NdisMoveMemory(pAd->MlmeAux.Ssid, pBss->Ssid, pBss->SsidLen);
-		pAd->MlmeAux.SsidLen = pBss->SsidLen;
-	}
-
-	pAd->MlmeAux.BssType = pBss->BssType;
-	pAd->MlmeAux.Channel = pBss->Channel;
-	pAd->MlmeAux.CentralChannel = pBss->CentralChannel;
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-	// Country IE of the AP will be evaluated and will be used.
-	if ((pAd->StaCfg.IEEE80211dClientMode != Rt802_11_D_None) &&
-		(pBss->bHasCountryIE == TRUE))
-	{
-		NdisMoveMemory(&pAd->CommonCfg.CountryCode[0], &pBss->CountryString[0], 2);
-		if (pBss->CountryString[2] == 'I')
-			pAd->CommonCfg.Geography = IDOR;
-		else if (pBss->CountryString[2] == 'O')
-			pAd->CommonCfg.Geography = ODOR;
-		else
-			pAd->CommonCfg.Geography = BOTH;
-		BuildChannelListEx(pAd);
-	}
-#endif // EXT_BUILD_CHANNEL_LIST //
-
-	// Let BBP register at 20MHz to do scan
-	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
-	BBPValue &= (~0x18);
-	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
-	DBGPRINT(RT_DEBUG_TRACE, ("SYNC - BBP R4 to 20MHz.l\n"));
-
-	// switch channel and waiting for beacon timer
-	AsicSwitchChannel(pAd, pAd->MlmeAux.Channel, FALSE);
-	AsicLockChannel(pAd, pAd->MlmeAux.Channel);
-	RTMPSetTimer(&pAd->MlmeAux.BeaconTimer, JOIN_TIMEOUT);
-
-    do
-	{
-		if (((pAd->CommonCfg.bIEEE80211H == 1) &&
-            (pAd->MlmeAux.Channel > 14) &&
-             RadarChannelCheck(pAd, pAd->MlmeAux.Channel))
-#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier
-             || (pAd->CommonCfg.CarrierDetect.Enable == TRUE)
-#endif // CARRIER_DETECTION_SUPPORT //
-            )
-		{
-			//
-			// We can't send any Probe request frame to meet 802.11h.
-			//
-			if (pBss->Hidden == 0)
-				break;
-		}
-
-		//
-		// send probe request
-		//
-		NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);
-		if (NStatus == NDIS_STATUS_SUCCESS)
-		{
-			if (pAd->MlmeAux.Channel <= 14)
-			{
-				pSupRate = pAd->CommonCfg.SupRate;
-				SupRateLen = pAd->CommonCfg.SupRateLen;
-				pExtRate = pAd->CommonCfg.ExtRate;
-				ExtRateLen = pAd->CommonCfg.ExtRateLen;
-			}
-			else
-			{
-				//
-				// Overwrite Support Rate, CCK rate are not allowed
-				//
-				pSupRate = ASupRate;
-				SupRateLen = ASupRateLen;
-				ExtRateLen = 0;
-			}
-
-			if (pAd->MlmeAux.BssType == BSS_INFRA)
-				MgtMacHeaderInit(pAd, &Hdr80211, SUBTYPE_PROBE_REQ, 0, pAd->MlmeAux.Bssid, pAd->MlmeAux.Bssid);
-			else
-				MgtMacHeaderInit(pAd, &Hdr80211, SUBTYPE_PROBE_REQ, 0, BROADCAST_ADDR, BROADCAST_ADDR);
-
-			MakeOutgoingFrame(pOutBuffer,               &FrameLen,
-							  sizeof(HEADER_802_11),    &Hdr80211,
-							  1,                        &SsidIe,
-							  1,                        &pAd->MlmeAux.SsidLen,
-							  pAd->MlmeAux.SsidLen,	    pAd->MlmeAux.Ssid,
-							  1,                        &SupRateIe,
-							  1,                        &SupRateLen,
-							  SupRateLen,               pSupRate,
-							  END_OF_ARGS);
-
-			if (ExtRateLen)
-			{
-				ULONG Tmp;
-				MakeOutgoingFrame(pOutBuffer + FrameLen,            &Tmp,
-								  1,                                &ExtRateIe,
-								  1,                                &ExtRateLen,
-								  ExtRateLen,                       pExtRate,
-								  END_OF_ARGS);
-				FrameLen += Tmp;
-			}
-
-
-			MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-			MlmeFreeMemory(pAd, pOutBuffer);
-		}
-    } while (FALSE);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("SYNC - Switch to ch %d, Wait BEACON from %02x:%02x:%02x:%02x:%02x:%02x\n",
-		pBss->Channel, pBss->Bssid[0], pBss->Bssid[1], pBss->Bssid[2], pBss->Bssid[3], pBss->Bssid[4], pBss->Bssid[5]));
-
-	pAd->Mlme.SyncMachine.CurrState = JOIN_WAIT_BEACON;
-}
-
-/*
-	==========================================================================
-	Description:
-		MLME START Request state machine procedure, starting an IBSS
-	==========================================================================
- */
-VOID MlmeStartReqAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR         Ssid[MAX_LEN_OF_SSID], SsidLen;
-	BOOLEAN       TimerCancelled;
-
-	// New for WPA security suites
-	UCHAR						VarIE[MAX_VIE_LEN]; 	// Total VIE length = MAX_VIE_LEN - -5
-	NDIS_802_11_VARIABLE_IEs	*pVIE = NULL;
-	LARGE_INTEGER				TimeStamp;
-	BOOLEAN Privacy;
-	USHORT Status;
-
-	// Init Variable IE structure
-	pVIE = (PNDIS_802_11_VARIABLE_IEs) VarIE;
-	pVIE->Length = 0;
-	TimeStamp.u.LowPart  = 0;
-	TimeStamp.u.HighPart = 0;
-
-	if (MlmeStartReqSanity(pAd, Elem->Msg, Elem->MsgLen, Ssid, &SsidLen))
-	{
-		// reset all the timers
-		RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &TimerCancelled);
-		RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer, &TimerCancelled);
-
-		//
-		// Start a new IBSS. All IBSS parameters are decided now....
-		//
-		DBGPRINT(RT_DEBUG_TRACE, ("MlmeStartReqAction - Start a new IBSS. All IBSS parameters are decided now.... \n"));
-		pAd->MlmeAux.BssType           = BSS_ADHOC;
-		NdisMoveMemory(pAd->MlmeAux.Ssid, Ssid, SsidLen);
-		pAd->MlmeAux.SsidLen           = SsidLen;
-
-		// generate a radom number as BSSID
-		MacAddrRandomBssid(pAd, pAd->MlmeAux.Bssid);
-		DBGPRINT(RT_DEBUG_TRACE, ("MlmeStartReqAction - generate a radom number as BSSID \n"));
-
-		Privacy = (pAd->StaCfg.WepStatus == Ndis802_11Encryption1Enabled) ||
-				  (pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled) ||
-				  (pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled);
-		pAd->MlmeAux.CapabilityInfo    = CAP_GENERATE(0,1,Privacy, (pAd->CommonCfg.TxPreamble == Rt802_11PreambleShort), 1, 0);
-		pAd->MlmeAux.BeaconPeriod      = pAd->CommonCfg.BeaconPeriod;
-		pAd->MlmeAux.AtimWin           = pAd->StaCfg.AtimWin;
-		pAd->MlmeAux.Channel           = pAd->CommonCfg.Channel;
-
-		pAd->CommonCfg.CentralChannel  = pAd->CommonCfg.Channel;
-		pAd->MlmeAux.CentralChannel    = pAd->CommonCfg.CentralChannel;
-
-		pAd->MlmeAux.SupRateLen= pAd->CommonCfg.SupRateLen;
-		NdisMoveMemory(pAd->MlmeAux.SupRate, pAd->CommonCfg.SupRate, MAX_LEN_OF_SUPPORTED_RATES);
-		RTMPCheckRates(pAd, pAd->MlmeAux.SupRate, &pAd->MlmeAux.SupRateLen);
-		pAd->MlmeAux.ExtRateLen = pAd->CommonCfg.ExtRateLen;
-		NdisMoveMemory(pAd->MlmeAux.ExtRate, pAd->CommonCfg.ExtRate, MAX_LEN_OF_SUPPORTED_RATES);
-		RTMPCheckRates(pAd, pAd->MlmeAux.ExtRate, &pAd->MlmeAux.ExtRateLen);
-#ifdef DOT11_N_SUPPORT
-		if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
-		{
-			RTMPUpdateHTIE(&pAd->CommonCfg.DesiredHtPhy, &pAd->StaCfg.DesiredHtPhyInfo.MCSSet[0], &pAd->MlmeAux.HtCapability, &pAd->MlmeAux.AddHtInfo);
-			pAd->MlmeAux.HtCapabilityLen = sizeof(HT_CAPABILITY_IE);
-			// Not turn pAd->StaActive.SupportedHtPhy.bHtEnable = TRUE here.
-			DBGPRINT(RT_DEBUG_TRACE, ("SYNC -pAd->StaActive.SupportedHtPhy.bHtEnable = TRUE\n"));
-		}
-		else
-#endif // DOT11_N_SUPPORT //
-		{
-			pAd->MlmeAux.HtCapabilityLen = 0;
-			pAd->StaActive.SupportedPhyInfo.bHtEnable = FALSE;
-		}
-		// temporarily not support QOS in IBSS
-		NdisZeroMemory(&pAd->MlmeAux.APEdcaParm, sizeof(EDCA_PARM));
-		NdisZeroMemory(&pAd->MlmeAux.APQbssLoad, sizeof(QBSS_LOAD_PARM));
-		NdisZeroMemory(&pAd->MlmeAux.APQosCapability, sizeof(QOS_CAPABILITY_PARM));
-
-		AsicSwitchChannel(pAd, pAd->MlmeAux.Channel, FALSE);
-		AsicLockChannel(pAd, pAd->MlmeAux.Channel);
-
-		DBGPRINT(RT_DEBUG_TRACE, ("SYNC - MlmeStartReqAction(ch= %d,sup rates= %d, ext rates=%d)\n",
-			pAd->MlmeAux.Channel, pAd->MlmeAux.SupRateLen, pAd->MlmeAux.ExtRateLen));
-
-		pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
-		Status = MLME_SUCCESS;
-		MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_START_CONF, 2, &Status);
-	}
-	else
-	{
-		DBGPRINT_ERR(("SYNC - MlmeStartReqAction() sanity check fail.\n"));
-		pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
-		Status = MLME_INVALID_FORMAT;
-		MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_START_CONF, 2, &Status);
-	}
-}
-
-/*
-	==========================================================================
-	Description:
-		peer sends beacon back when scanning
-	==========================================================================
- */
-VOID PeerBeaconAtScanAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR           Bssid[MAC_ADDR_LEN], Addr2[MAC_ADDR_LEN];
-	UCHAR           Ssid[MAX_LEN_OF_SSID], BssType, Channel, NewChannel,
-					SsidLen, DtimCount, DtimPeriod, BcastFlag, MessageToMe;
-	CF_PARM         CfParm;
-	USHORT          BeaconPeriod, AtimWin, CapabilityInfo;
-	PFRAME_802_11   pFrame;
-	LARGE_INTEGER   TimeStamp;
-	UCHAR           Erp;
-	UCHAR         	SupRate[MAX_LEN_OF_SUPPORTED_RATES], ExtRate[MAX_LEN_OF_SUPPORTED_RATES];
-	UCHAR		  	SupRateLen, ExtRateLen;
-	USHORT 			LenVIE;
-	UCHAR			CkipFlag;
-	UCHAR			AironetCellPowerLimit;
-	EDCA_PARM       EdcaParm;
-	QBSS_LOAD_PARM  QbssLoad;
-	QOS_CAPABILITY_PARM QosCapability;
-	ULONG						RalinkIe;
-	UCHAR						VarIE[MAX_VIE_LEN];		// Total VIE length = MAX_VIE_LEN - -5
-	NDIS_802_11_VARIABLE_IEs	*pVIE = NULL;
-	HT_CAPABILITY_IE		HtCapability;
-	ADD_HT_INFO_IE		AddHtInfo;	// AP might use this additional ht info IE
-	UCHAR			HtCapabilityLen = 0, PreNHtCapabilityLen = 0;
-	UCHAR			AddHtInfoLen;
-	UCHAR			NewExtChannelOffset = 0xff;
-
-
-	// NdisFillMemory(Ssid, MAX_LEN_OF_SSID, 0x00);
-	pFrame = (PFRAME_802_11) Elem->Msg;
-	// Init Variable IE structure
-	pVIE = (PNDIS_802_11_VARIABLE_IEs) VarIE;
-	pVIE->Length = 0;
-#ifdef DOT11_N_SUPPORT
-    RTMPZeroMemory(&HtCapability, sizeof(HtCapability));
-	RTMPZeroMemory(&AddHtInfo, sizeof(ADD_HT_INFO_IE));
-#endif // DOT11_N_SUPPORT //
-
-	if (PeerBeaconAndProbeRspSanity(pAd,
-								Elem->Msg,
-								Elem->MsgLen,
-								Elem->Channel,
-								Addr2,
-								Bssid,
-								Ssid,
-								&SsidLen,
-								&BssType,
-								&BeaconPeriod,
-								&Channel,
-								&NewChannel,
-								&TimeStamp,
-								&CfParm,
-								&AtimWin,
-								&CapabilityInfo,
-								&Erp,
-								&DtimCount,
-								&DtimPeriod,
-								&BcastFlag,
-								&MessageToMe,
-								SupRate,
-								&SupRateLen,
-								ExtRate,
-								&ExtRateLen,
-								&CkipFlag,
-								&AironetCellPowerLimit,
-								&EdcaParm,
-								&QbssLoad,
-								&QosCapability,
-								&RalinkIe,
-								&HtCapabilityLen,
-								&PreNHtCapabilityLen,
-								&HtCapability,
-								&AddHtInfoLen,
-								&AddHtInfo,
-								&NewExtChannelOffset,
-								&LenVIE,
-								pVIE))
-	{
-		ULONG Idx;
-		CHAR Rssi = 0;
-
-		Idx = BssTableSearch(&pAd->ScanTab, Bssid, Channel);
-		if (Idx != BSS_NOT_FOUND)
-			Rssi = pAd->ScanTab.BssEntry[Idx].Rssi;
-
-		Rssi = RTMPMaxRssi(pAd, ConvertToRssi(pAd, Elem->Rssi0, RSSI_0), ConvertToRssi(pAd, Elem->Rssi1, RSSI_1), ConvertToRssi(pAd, Elem->Rssi2, RSSI_2));
-
-
-#ifdef DOT11_N_SUPPORT
-		if ((HtCapabilityLen > 0) || (PreNHtCapabilityLen > 0))
-			HtCapabilityLen = SIZE_HT_CAP_IE;
-#endif // DOT11_N_SUPPORT //
-		if ((pAd->StaCfg.CCXReqType != MSRN_TYPE_UNUSED) && (Channel == pAd->StaCfg.CCXScanChannel))
-		{
-			Idx = BssTableSetEntry(pAd, &pAd->StaCfg.CCXBssTab, Bssid, Ssid, SsidLen, BssType, BeaconPeriod,
-						 &CfParm, AtimWin, CapabilityInfo, SupRate, SupRateLen,ExtRate, ExtRateLen, &HtCapability,
-						 &AddHtInfo, HtCapabilityLen, AddHtInfoLen, NewExtChannelOffset, Channel, Rssi, TimeStamp, CkipFlag,
-						 &EdcaParm, &QosCapability, &QbssLoad, LenVIE, pVIE);
-			if (Idx != BSS_NOT_FOUND)
-			{
-				NdisMoveMemory(pAd->StaCfg.CCXBssTab.BssEntry[Idx].PTSF, &Elem->Msg[24], 4);
-				NdisMoveMemory(&pAd->StaCfg.CCXBssTab.BssEntry[Idx].TTSF[0], &Elem->TimeStamp.u.LowPart, 4);
-				NdisMoveMemory(&pAd->StaCfg.CCXBssTab.BssEntry[Idx].TTSF[4], &Elem->TimeStamp.u.LowPart, 4);
-				if (pAd->StaCfg.CCXReqType == MSRN_TYPE_BEACON_REQ)
-					AironetAddBeaconReport(pAd, Idx, Elem);
-			}
-		}
-		else
-		{
-			Idx = BssTableSetEntry(pAd, &pAd->ScanTab, Bssid, Ssid, SsidLen, BssType, BeaconPeriod,
-						  &CfParm, AtimWin, CapabilityInfo, SupRate, SupRateLen, ExtRate, ExtRateLen,  &HtCapability,
-						 &AddHtInfo, HtCapabilityLen, AddHtInfoLen, NewExtChannelOffset, Channel, Rssi, TimeStamp, CkipFlag,
-						 &EdcaParm, &QosCapability, &QbssLoad, LenVIE, pVIE);
-#ifdef DOT11_N_SUPPORT
-#ifdef DOT11N_DRAFT3
-			if (pAd->ChannelList[pAd->CommonCfg.ChannelListIdx].bEffectedChannel == TRUE)
-			{
-				UCHAR		RegClass;
-				PeerBeaconAndProbeRspSanity2(pAd, Elem->Msg, Elem->MsgLen, &RegClass);
-				TriEventTableSetEntry(pAd, &pAd->CommonCfg.TriggerEventTab, Bssid, &HtCapability, HtCapabilityLen, RegClass, Channel);
-			}
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
-			if (Idx != BSS_NOT_FOUND)
-			{
-				NdisMoveMemory(pAd->ScanTab.BssEntry[Idx].PTSF, &Elem->Msg[24], 4);
-				NdisMoveMemory(&pAd->ScanTab.BssEntry[Idx].TTSF[0], &Elem->TimeStamp.u.LowPart, 4);
-				NdisMoveMemory(&pAd->ScanTab.BssEntry[Idx].TTSF[4], &Elem->TimeStamp.u.LowPart, 4);
-			}
-		}
-	}
-	// sanity check fail, ignored
-}
-
-/*
-	==========================================================================
-	Description:
-		When waiting joining the (I)BSS, beacon received from external
-	==========================================================================
- */
-VOID PeerBeaconAtJoinAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR         Bssid[MAC_ADDR_LEN], Addr2[MAC_ADDR_LEN];
-	UCHAR         Ssid[MAX_LEN_OF_SSID], SsidLen, BssType, Channel, MessageToMe,
-				  DtimCount, DtimPeriod, BcastFlag, NewChannel;
-	LARGE_INTEGER TimeStamp;
-	USHORT        BeaconPeriod, AtimWin, CapabilityInfo;
-	CF_PARM       Cf;
-	BOOLEAN       TimerCancelled;
-	UCHAR         Erp;
-	UCHAR         SupRate[MAX_LEN_OF_SUPPORTED_RATES], ExtRate[MAX_LEN_OF_SUPPORTED_RATES];
-	UCHAR		  SupRateLen, ExtRateLen;
-	UCHAR         CkipFlag;
-	USHORT 		  LenVIE;
-	UCHAR		  AironetCellPowerLimit;
-	EDCA_PARM       EdcaParm;
-	QBSS_LOAD_PARM  QbssLoad;
-	QOS_CAPABILITY_PARM QosCapability;
-	USHORT        Status;
-	UCHAR						VarIE[MAX_VIE_LEN];		// Total VIE length = MAX_VIE_LEN - -5
-	NDIS_802_11_VARIABLE_IEs	*pVIE = NULL;
-	ULONG           RalinkIe;
-	ULONG         Idx;
-	HT_CAPABILITY_IE		HtCapability;
-	ADD_HT_INFO_IE		AddHtInfo;	// AP might use this additional ht info IE
-	UCHAR				HtCapabilityLen = 0, PreNHtCapabilityLen = 0;
-	UCHAR			AddHtInfoLen;
-	UCHAR			NewExtChannelOffset = 0xff;
-#ifdef DOT11_N_SUPPORT
-	UCHAR			CentralChannel;
-#endif // DOT11_N_SUPPORT //
-
-	// Init Variable IE structure
-	pVIE = (PNDIS_802_11_VARIABLE_IEs) VarIE;
-	pVIE->Length = 0;
-    RTMPZeroMemory(&HtCapability, sizeof(HtCapability));
-	RTMPZeroMemory(&AddHtInfo, sizeof(ADD_HT_INFO_IE));
-
-
-	if (PeerBeaconAndProbeRspSanity(pAd,
-								Elem->Msg,
-								Elem->MsgLen,
-								Elem->Channel,
-								Addr2,
-								Bssid,
-								Ssid,
-								&SsidLen,
-								&BssType,
-								&BeaconPeriod,
-								&Channel,
-								&NewChannel,
-								&TimeStamp,
-								&Cf,
-								&AtimWin,
-								&CapabilityInfo,
-								&Erp,
-								&DtimCount,
-								&DtimPeriod,
-								&BcastFlag,
-								&MessageToMe,
-								SupRate,
-								&SupRateLen,
-								ExtRate,
-								&ExtRateLen,
-								&CkipFlag,
-								&AironetCellPowerLimit,
-								&EdcaParm,
-								&QbssLoad,
-								&QosCapability,
-								&RalinkIe,
-								&HtCapabilityLen,
-								&PreNHtCapabilityLen,
-								&HtCapability,
-								&AddHtInfoLen,
-								&AddHtInfo,
-								&NewExtChannelOffset,
-								&LenVIE,
-								pVIE))
-	{
-		// Disqualify 11b only adhoc when we are in 11g only adhoc mode
-		if ((BssType == BSS_ADHOC) && (pAd->CommonCfg.PhyMode == PHY_11G) && ((SupRateLen+ExtRateLen)< 12))
-			return;
-
-		// BEACON from desired BSS/IBSS found. We should be able to decide most
-		// BSS parameters here.
-		// Q. But what happen if this JOIN doesn't conclude a successful ASSOCIATEION?
-		//    Do we need to receover back all parameters belonging to previous BSS?
-		// A. Should be not. There's no back-door recover to previous AP. It still need
-		//    a new JOIN-AUTH-ASSOC sequence.
-		if (MAC_ADDR_EQUAL(pAd->MlmeAux.Bssid, Bssid))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("SYNC - receive desired BEACON at JoinWaitBeacon... Channel = %d\n", Channel));
-			RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer, &TimerCancelled);
-
-			// Update RSSI to prevent No signal display when cards first initialized
-			pAd->StaCfg.RssiSample.LastRssi0	= ConvertToRssi(pAd, Elem->Rssi0, RSSI_0);
-			pAd->StaCfg.RssiSample.LastRssi1	= ConvertToRssi(pAd, Elem->Rssi1, RSSI_1);
-			pAd->StaCfg.RssiSample.LastRssi2	= ConvertToRssi(pAd, Elem->Rssi2, RSSI_2);
-			pAd->StaCfg.RssiSample.AvgRssi0	= pAd->StaCfg.RssiSample.LastRssi0;
-			pAd->StaCfg.RssiSample.AvgRssi0X8	= pAd->StaCfg.RssiSample.AvgRssi0 << 3;
-			pAd->StaCfg.RssiSample.AvgRssi1	= pAd->StaCfg.RssiSample.LastRssi1;
-			pAd->StaCfg.RssiSample.AvgRssi1X8	= pAd->StaCfg.RssiSample.AvgRssi1 << 3;
-			pAd->StaCfg.RssiSample.AvgRssi2	= pAd->StaCfg.RssiSample.LastRssi2;
-			pAd->StaCfg.RssiSample.AvgRssi2X8	= pAd->StaCfg.RssiSample.AvgRssi2 << 3;
-
-			//
-			// We need to check if SSID only set to any, then we can record the current SSID.
-			// Otherwise will cause hidden SSID association failed.
-			//
-			if (pAd->MlmeAux.SsidLen == 0)
-			{
-				NdisMoveMemory(pAd->MlmeAux.Ssid, Ssid, SsidLen);
-				pAd->MlmeAux.SsidLen = SsidLen;
-			}
-			else
-			{
-				Idx = BssSsidTableSearch(&pAd->ScanTab, Bssid, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen, Channel);
-
-				if (Idx != BSS_NOT_FOUND)
-				{
-					//
-					// Multiple SSID case, used correct CapabilityInfo
-					//
-					CapabilityInfo = pAd->ScanTab.BssEntry[Idx].CapabilityInfo;
-				}
-			}
-			NdisMoveMemory(pAd->MlmeAux.Bssid, Bssid, MAC_ADDR_LEN);
-			pAd->MlmeAux.CapabilityInfo = CapabilityInfo & SUPPORTED_CAPABILITY_INFO;
-			pAd->MlmeAux.BssType = BssType;
-			pAd->MlmeAux.BeaconPeriod = BeaconPeriod;
-			pAd->MlmeAux.Channel = Channel;
-			pAd->MlmeAux.AtimWin = AtimWin;
-			pAd->MlmeAux.CfpPeriod = Cf.CfpPeriod;
-			pAd->MlmeAux.CfpMaxDuration = Cf.CfpMaxDuration;
-			pAd->MlmeAux.APRalinkIe = RalinkIe;
-
-			// Copy AP's supported rate to MlmeAux for creating assoication request
-			// Also filter out not supported rate
-			pAd->MlmeAux.SupRateLen = SupRateLen;
-			NdisMoveMemory(pAd->MlmeAux.SupRate, SupRate, SupRateLen);
-			RTMPCheckRates(pAd, pAd->MlmeAux.SupRate, &pAd->MlmeAux.SupRateLen);
-			pAd->MlmeAux.ExtRateLen = ExtRateLen;
-			NdisMoveMemory(pAd->MlmeAux.ExtRate, ExtRate, ExtRateLen);
-			RTMPCheckRates(pAd, pAd->MlmeAux.ExtRate, &pAd->MlmeAux.ExtRateLen);
-
-            NdisZeroMemory(pAd->StaActive.SupportedPhyInfo.MCSSet, 16);
-#ifdef DOT11_N_SUPPORT
-			pAd->MlmeAux.NewExtChannelOffset = NewExtChannelOffset;
-			pAd->MlmeAux.HtCapabilityLen = HtCapabilityLen;
-
-			// filter out un-supported ht rates
-			if (((HtCapabilityLen > 0) || (PreNHtCapabilityLen > 0)) && (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
-			{
-				RTMPZeroMemory(&pAd->MlmeAux.HtCapability, SIZE_HT_CAP_IE);
-   				RTMPMoveMemory(&pAd->MlmeAux.AddHtInfo, &AddHtInfo, SIZE_ADD_HT_INFO_IE);
-
-				// StaActive.SupportedHtPhy.MCSSet stores Peer AP's 11n Rx capability
-				NdisMoveMemory(pAd->StaActive.SupportedPhyInfo.MCSSet, HtCapability.MCSSet, 16);
-				pAd->MlmeAux.NewExtChannelOffset = NewExtChannelOffset;
-				pAd->MlmeAux.HtCapabilityLen = SIZE_HT_CAP_IE;
-				pAd->StaActive.SupportedPhyInfo.bHtEnable = TRUE;
-				if (PreNHtCapabilityLen > 0)
-					pAd->StaActive.SupportedPhyInfo.bPreNHt = TRUE;
-				RTMPCheckHt(pAd, BSSID_WCID, &HtCapability, &AddHtInfo);
-				// Copy AP Parameter to StaActive.  This is also in LinkUp.
-				DBGPRINT(RT_DEBUG_TRACE, ("PeerBeaconAtJoinAction! (MpduDensity=%d, MaxRAmpduFactor=%d, BW=%d)\n",
-					pAd->StaActive.SupportedHtPhy.MpduDensity, pAd->StaActive.SupportedHtPhy.MaxRAmpduFactor, HtCapability.HtCapInfo.ChannelWidth));
-
-				if (AddHtInfoLen > 0)
-				{
-					CentralChannel = AddHtInfo.ControlChan;
-		 			// Check again the Bandwidth capability of this AP.
-		 			if ((AddHtInfo.ControlChan > 2)&& (AddHtInfo.AddHtInfo.ExtChanOffset == EXTCHA_BELOW) && (HtCapability.HtCapInfo.ChannelWidth == BW_40))
-		 			{
-		 				CentralChannel = AddHtInfo.ControlChan - 2;
-		 			}
-		 			else if ((AddHtInfo.AddHtInfo.ExtChanOffset == EXTCHA_ABOVE) && (HtCapability.HtCapInfo.ChannelWidth == BW_40))
-		 			{
-		 				CentralChannel = AddHtInfo.ControlChan + 2;
-		 			}
-
-					// Check Error .
-					if (pAd->MlmeAux.CentralChannel != CentralChannel)
-		 				DBGPRINT(RT_DEBUG_ERROR, ("PeerBeaconAtJoinAction HT===>Beacon Central Channel = %d, Control Channel = %d. Mlmeaux CentralChannel = %d\n", CentralChannel, AddHtInfo.ControlChan, pAd->MlmeAux.CentralChannel));
-
-		 			DBGPRINT(RT_DEBUG_TRACE, ("PeerBeaconAtJoinAction HT===>Central Channel = %d, Control Channel = %d,  .\n", CentralChannel, AddHtInfo.ControlChan));
-
-				}
-
-			}
-			else
-#endif // DOT11_N_SUPPORT //
-			{
-   				// To prevent error, let legacy AP must have same CentralChannel and Channel.
-				if ((HtCapabilityLen == 0) && (PreNHtCapabilityLen == 0))
-					pAd->MlmeAux.CentralChannel = pAd->MlmeAux.Channel;
-
-				pAd->StaActive.SupportedPhyInfo.bHtEnable = FALSE;
-				RTMPZeroMemory(&pAd->MlmeAux.HtCapability, SIZE_HT_CAP_IE);
-				RTMPZeroMemory(&pAd->MlmeAux.AddHtInfo, SIZE_ADD_HT_INFO_IE);
-			}
-
-			RTMPUpdateMlmeRate(pAd);
-
-			// copy QOS related information
-			if ((pAd->CommonCfg.bWmmCapable)
-#ifdef DOT11_N_SUPPORT
-				 || (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
-#endif // DOT11_N_SUPPORT //
-				)
-			{
-				NdisMoveMemory(&pAd->MlmeAux.APEdcaParm, &EdcaParm, sizeof(EDCA_PARM));
-				NdisMoveMemory(&pAd->MlmeAux.APQbssLoad, &QbssLoad, sizeof(QBSS_LOAD_PARM));
-				NdisMoveMemory(&pAd->MlmeAux.APQosCapability, &QosCapability, sizeof(QOS_CAPABILITY_PARM));
-			}
-			else
-			{
-				NdisZeroMemory(&pAd->MlmeAux.APEdcaParm, sizeof(EDCA_PARM));
-				NdisZeroMemory(&pAd->MlmeAux.APQbssLoad, sizeof(QBSS_LOAD_PARM));
-				NdisZeroMemory(&pAd->MlmeAux.APQosCapability, sizeof(QOS_CAPABILITY_PARM));
-			}
-
-			DBGPRINT(RT_DEBUG_TRACE, ("SYNC - after JOIN, SupRateLen=%d, ExtRateLen=%d\n",
-										pAd->MlmeAux.SupRateLen, pAd->MlmeAux.ExtRateLen));
-
-#ifdef LEAP_SUPPORT
-			// Update CkipFlag
-			pAd->StaCfg.CkipFlag = CkipFlag;
-
-			// Keep TimeStamp for Re-Association used.
-			if (LEAP_CCKM_ON(pAd) && (pAd->StaCfg.CCKMLinkUpFlag == TRUE))
-				pAd->StaCfg.CCKMBeaconAtJoinTimeStamp = TimeStamp;
-#endif // LEAP_SUPPORT //
-
-			if (AironetCellPowerLimit != 0xFF)
-			{
-				//We need to change our TxPower for CCX 2.0 AP Control of Client Transmit Power
-				ChangeToCellPowerLimit(pAd, AironetCellPowerLimit);
-			}
-			else  //Used the default TX Power Percentage.
-				pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault;
-
-			pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
-			Status = MLME_SUCCESS;
-			MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_JOIN_CONF, 2, &Status);
-		}
-		// not to me BEACON, ignored
-	}
-	// sanity check fail, ignore this frame
-}
-
-/*
-	==========================================================================
-	Description:
-		receive BEACON from peer
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID PeerBeacon(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR         Bssid[MAC_ADDR_LEN], Addr2[MAC_ADDR_LEN];
-	CHAR          Ssid[MAX_LEN_OF_SSID];
-	CF_PARM       CfParm;
-	UCHAR         SsidLen, MessageToMe=0, BssType, Channel, NewChannel, index=0;
-	UCHAR         DtimCount=0, DtimPeriod=0, BcastFlag=0;
-	USHORT        CapabilityInfo, AtimWin, BeaconPeriod;
-	LARGE_INTEGER TimeStamp;
-	USHORT        TbttNumToNextWakeUp;
-	UCHAR         Erp;
-	UCHAR         SupRate[MAX_LEN_OF_SUPPORTED_RATES], ExtRate[MAX_LEN_OF_SUPPORTED_RATES];
-	UCHAR		  SupRateLen, ExtRateLen;
-	UCHAR		  CkipFlag;
-	USHORT        LenVIE;
-	UCHAR		  AironetCellPowerLimit;
-	EDCA_PARM       EdcaParm;
-	QBSS_LOAD_PARM  QbssLoad;
-	QOS_CAPABILITY_PARM QosCapability;
-	ULONG           RalinkIe;
-	// New for WPA security suites
-	UCHAR						VarIE[MAX_VIE_LEN];		// Total VIE length = MAX_VIE_LEN - -5
-	NDIS_802_11_VARIABLE_IEs	*pVIE = NULL;
-	HT_CAPABILITY_IE		HtCapability;
-	ADD_HT_INFO_IE		AddHtInfo;	// AP might use this additional ht info IE
-	UCHAR			HtCapabilityLen, PreNHtCapabilityLen;
-	UCHAR			AddHtInfoLen;
-	UCHAR			NewExtChannelOffset = 0xff;
-
-
-#ifdef RALINK_ATE
-    if (ATE_ON(pAd))
-    {
-		return;
-    }
-#endif // RALINK_ATE //
-
-	if (!(INFRA_ON(pAd) || ADHOC_ON(pAd)
-		))
-		return;
-
-	// Init Variable IE structure
-	pVIE = (PNDIS_802_11_VARIABLE_IEs) VarIE;
-	pVIE->Length = 0;
-    RTMPZeroMemory(&HtCapability, sizeof(HtCapability));
-	RTMPZeroMemory(&AddHtInfo, sizeof(ADD_HT_INFO_IE));
-
-	if (PeerBeaconAndProbeRspSanity(pAd,
-								Elem->Msg,
-								Elem->MsgLen,
-								Elem->Channel,
-								Addr2,
-								Bssid,
-								Ssid,
-								&SsidLen,
-								&BssType,
-								&BeaconPeriod,
-								&Channel,
-								&NewChannel,
-								&TimeStamp,
-								&CfParm,
-								&AtimWin,
-								&CapabilityInfo,
-								&Erp,
-								&DtimCount,
-								&DtimPeriod,
-								&BcastFlag,
-								&MessageToMe,
-								SupRate,
-								&SupRateLen,
-								ExtRate,
-								&ExtRateLen,
-								&CkipFlag,
-								&AironetCellPowerLimit,
-								&EdcaParm,
-								&QbssLoad,
-								&QosCapability,
-								&RalinkIe,
-								&HtCapabilityLen,
-								&PreNHtCapabilityLen,
-								&HtCapability,
-								&AddHtInfoLen,
-								&AddHtInfo,
-								&NewExtChannelOffset,
-								&LenVIE,
-								pVIE))
-	{
-		BOOLEAN is_my_bssid, is_my_ssid;
-		ULONG   Bssidx, Now;
-		BSS_ENTRY *pBss;
-		CHAR		RealRssi = RTMPMaxRssi(pAd, ConvertToRssi(pAd, Elem->Rssi0, RSSI_0), ConvertToRssi(pAd, Elem->Rssi1, RSSI_1), ConvertToRssi(pAd, Elem->Rssi2, RSSI_2));
-
-		is_my_bssid = MAC_ADDR_EQUAL(Bssid, pAd->CommonCfg.Bssid)? TRUE : FALSE;
-		is_my_ssid = SSID_EQUAL(Ssid, SsidLen, pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen)? TRUE:FALSE;
-
-
-		// ignore BEACON not for my SSID
-		if ((! is_my_ssid) && (! is_my_bssid))
-			return;
-
-		// It means STA waits disassoc completely from this AP, ignores this beacon.
-		if (pAd->Mlme.CntlMachine.CurrState == CNTL_WAIT_DISASSOC)
-			return;
-
-#ifdef DOT11_N_SUPPORT
-		// Copy Control channel for this BSSID.
-		if (AddHtInfoLen != 0)
-			Channel = AddHtInfo.ControlChan;
-
-		if ((HtCapabilityLen > 0) || (PreNHtCapabilityLen > 0))
-			HtCapabilityLen = SIZE_HT_CAP_IE;
-#endif // DOT11_N_SUPPORT //
-
-		//
-		// Housekeeping "SsidBssTab" table for later-on ROAMing usage.
-		//
-		Bssidx = BssTableSearch(&pAd->ScanTab, Bssid, Channel);
-		if (Bssidx == BSS_NOT_FOUND)
-		{
-			// discover new AP of this network, create BSS entry
-			Bssidx = BssTableSetEntry(pAd, &pAd->ScanTab, Bssid, Ssid, SsidLen, BssType, BeaconPeriod,
-						 &CfParm, AtimWin, CapabilityInfo, SupRate, SupRateLen, ExtRate, ExtRateLen,
-						&HtCapability, &AddHtInfo,HtCapabilityLen,AddHtInfoLen,NewExtChannelOffset, Channel,
-						RealRssi, TimeStamp, CkipFlag, &EdcaParm, &QosCapability,
-						&QbssLoad, LenVIE, pVIE);
-			if (Bssidx == BSS_NOT_FOUND) // return if BSS table full
-				return;
-
-			NdisMoveMemory(pAd->ScanTab.BssEntry[Bssidx].PTSF, &Elem->Msg[24], 4);
-			NdisMoveMemory(&pAd->ScanTab.BssEntry[Bssidx].TTSF[0], &Elem->TimeStamp.u.LowPart, 4);
-			NdisMoveMemory(&pAd->ScanTab.BssEntry[Bssidx].TTSF[4], &Elem->TimeStamp.u.LowPart, 4);
-
-
-
-		}
-
-		if ((pAd->CommonCfg.bIEEE80211H == 1) && (NewChannel != 0) && (Channel != NewChannel))
-		{
-			// Switching to channel 1 can prevent from rescanning the current channel immediately (by auto reconnection).
-			// In addition, clear the MLME queue and the scan table to discard the RX packets and previous scanning results.
-			AsicSwitchChannel(pAd, 1, FALSE);
-			AsicLockChannel(pAd, 1);
-		    LinkDown(pAd, FALSE);
-			MlmeQueueInit(&pAd->Mlme.Queue);
-			BssTableInit(&pAd->ScanTab);
-		    RTMPusecDelay(1000000);		// use delay to prevent STA do reassoc
-
-			// channel sanity check
-			for (index = 0 ; index < pAd->ChannelListNum; index++)
-			{
-				if (pAd->ChannelList[index].Channel == NewChannel)
-				{
-					pAd->ScanTab.BssEntry[Bssidx].Channel = NewChannel;
-					pAd->CommonCfg.Channel = NewChannel;
-					AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
-					AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-					DBGPRINT(RT_DEBUG_TRACE, ("PeerBeacon - STA receive channel switch announcement IE (New Channel =%d)\n", NewChannel));
-					break;
-				}
-			}
-
-			if (index >= pAd->ChannelListNum)
-			{
-				DBGPRINT_ERR(("PeerBeacon(can not find New Channel=%d in ChannelList[%d]\n", pAd->CommonCfg.Channel, pAd->ChannelListNum));
-			}
-		}
-
-		// if the ssid matched & bssid unmatched, we should select the bssid with large value.
-		// This might happened when two STA start at the same time
-		if ((! is_my_bssid) && ADHOC_ON(pAd))
-		{
-			INT	i;
-
-			// Add the safeguard against the mismatch of adhoc wep status
-			if (pAd->StaCfg.WepStatus != pAd->ScanTab.BssEntry[Bssidx].WepStatus)
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("SYNC - Not matched wep status %d %d\n", pAd->StaCfg.WepStatus, pAd->ScanTab.BssEntry[Bssidx].WepStatus));
-				DBGPRINT(RT_DEBUG_TRACE, ("bssid=%s\n", pAd->ScanTab.BssEntry[Bssidx].Bssid));
-				return;
-			}
-
-			// collapse into the ADHOC network which has bigger BSSID value.
-			for (i = 0; i < 6; i++)
-			{
-				if (Bssid[i] > pAd->CommonCfg.Bssid[i])
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("SYNC - merge to the IBSS with bigger BSSID=%02x:%02x:%02x:%02x:%02x:%02x\n",
-						Bssid[0], Bssid[1], Bssid[2], Bssid[3], Bssid[4], Bssid[5]));
-					AsicDisableSync(pAd);
-					COPY_MAC_ADDR(pAd->CommonCfg.Bssid, Bssid);
-					AsicSetBssid(pAd, pAd->CommonCfg.Bssid);
-					MakeIbssBeacon(pAd);        // re-build BEACON frame
-					AsicEnableIbssSync(pAd);    // copy BEACON frame to on-chip memory
-					is_my_bssid = TRUE;
-					break;
-				}
-				else if (Bssid[i] < pAd->CommonCfg.Bssid[i])
-					break;
-			}
-		}
-
-
-		NdisGetSystemUpTime(&Now);
-		pBss = &pAd->ScanTab.BssEntry[Bssidx];
-		pBss->Rssi = RealRssi;       // lastest RSSI
-		pBss->LastBeaconRxTime = Now;   // last RX timestamp
-
-		//
-		// BEACON from my BSSID - either IBSS or INFRA network
-		//
-		if (is_my_bssid)
-		{
-			RXWI_STRUC	RxWI;
-
-			pAd->StaCfg.DtimCount = DtimCount;
-			pAd->StaCfg.DtimPeriod = DtimPeriod;
-			pAd->StaCfg.LastBeaconRxTime = Now;
-
-
-			RxWI.RSSI0 = Elem->Rssi0;
-			RxWI.RSSI1 = Elem->Rssi1;
-			RxWI.RSSI2 = Elem->Rssi2;
-
-			Update_Rssi_Sample(pAd, &pAd->StaCfg.RssiSample, &RxWI);
-			if (AironetCellPowerLimit != 0xFF)
-			{
-				//
-				// We get the Cisco (ccx) "TxPower Limit" required
-				// Changed to appropriate TxPower Limit for Ciso Compatible Extensions
-				//
-				ChangeToCellPowerLimit(pAd, AironetCellPowerLimit);
-			}
-			else
-			{
-				//
-				// AironetCellPowerLimit equal to 0xFF means the Cisco (ccx) "TxPower Limit" not exist.
-				// Used the default TX Power Percentage, that set from UI.
-				//
-				pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault;
-			}
-
-			if (ADHOC_ON(pAd) && (CAP_IS_IBSS_ON(CapabilityInfo)))
-			{
-				UCHAR			MaxSupportedRateIn500Kbps = 0;
-				UCHAR			idx;
-				MAC_TABLE_ENTRY *pEntry;
-
-				// supported rates array may not be sorted. sort it and find the maximum rate
-			    for (idx=0; idx<SupRateLen; idx++)
-						{
-			        if (MaxSupportedRateIn500Kbps < (SupRate[idx] & 0x7f))
-			            MaxSupportedRateIn500Kbps = SupRate[idx] & 0x7f;
-						}
-
-				for (idx=0; idx<ExtRateLen; idx++)
-			    {
-			        if (MaxSupportedRateIn500Kbps < (ExtRate[idx] & 0x7f))
-			            MaxSupportedRateIn500Kbps = ExtRate[idx] & 0x7f;
-					}
-
-				// look up the existing table
-				pEntry = MacTableLookup(pAd, Addr2);
-
-				// Ad-hoc mode is using MAC address as BA session. So we need to continuously find newly joined adhoc station by receiving beacon.
-				// To prevent always check this, we use wcid == RESERVED_WCID to recognize it as newly joined adhoc station.
-				if ((ADHOC_ON(pAd) && (Elem->Wcid == RESERVED_WCID)) ||
-					(pEntry && ((pEntry->LastBeaconRxTime + ADHOC_ENTRY_BEACON_LOST_TIME) < Now)))
-						{
-					if (pEntry == NULL)
-						// Another adhoc joining, add to our MAC table.
-						pEntry = MacTableInsertEntry(pAd, Addr2, BSS0, FALSE);
-
-					if (StaAddMacTableEntry(pAd, pEntry, MaxSupportedRateIn500Kbps, &HtCapability, HtCapabilityLen, CapabilityInfo) == FALSE)
-					{
-						DBGPRINT(RT_DEBUG_TRACE, ("ADHOC - Add Entry failed.\n"));
-						return;
-					}
-
-					if (pEntry &&
-						(Elem->Wcid == RESERVED_WCID))
-				{
-						idx = pAd->StaCfg.DefaultKeyId;
-						RT28XX_STA_SECURITY_INFO_ADD(pAd, BSS0, idx, pEntry);
-				}
-				}
-
-				if (pEntry && pEntry->ValidAsCLI)
-					pEntry->LastBeaconRxTime = Now;
-
-				// At least another peer in this IBSS, declare MediaState as CONNECTED
-				if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
-				{
-					OPSTATUS_SET_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
-
-					pAd->IndicateMediaState = NdisMediaStateConnected;
-					RTMP_IndicateMediaState(pAd);
-	                pAd->ExtraInfo = GENERAL_LINK_UP;
-					AsicSetBssid(pAd, pAd->CommonCfg.Bssid);
-
-					// 2003/03/12 - john
-					// Make sure this entry in "ScanTab" table, thus complies to Microsoft's policy that
-					// "site survey" result should always include the current connected network.
-					//
-					Bssidx = BssTableSearch(&pAd->ScanTab, Bssid, Channel);
-					if (Bssidx == BSS_NOT_FOUND)
-					{
-						Bssidx = BssTableSetEntry(pAd, &pAd->ScanTab, Bssid, Ssid, SsidLen, BssType, BeaconPeriod,
-									&CfParm, AtimWin, CapabilityInfo, SupRate, SupRateLen, ExtRate, ExtRateLen, &HtCapability,
-									&AddHtInfo, HtCapabilityLen, AddHtInfoLen, NewExtChannelOffset, Channel, RealRssi, TimeStamp, 0,
-									&EdcaParm, &QosCapability, &QbssLoad, LenVIE, pVIE);
-					}
-					DBGPRINT(RT_DEBUG_TRACE, ("ADHOC  fOP_STATUS_MEDIA_STATE_CONNECTED.\n"));
-				}
-			}
-
-			if (INFRA_ON(pAd))
-			{
-				BOOLEAN bUseShortSlot, bUseBGProtection;
-
-				// decide to use/change to -
-				//      1. long slot (20 us) or short slot (9 us) time
-				//      2. turn on/off RTS/CTS and/or CTS-to-self protection
-				//      3. short preamble
-
-				//bUseShortSlot = pAd->CommonCfg.bUseShortSlotTime && CAP_IS_SHORT_SLOT(CapabilityInfo);
-				bUseShortSlot = CAP_IS_SHORT_SLOT(CapabilityInfo);
-				if (bUseShortSlot != OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_SHORT_SLOT_INUSED))
-					AsicSetSlotTime(pAd, bUseShortSlot);
-
-				bUseBGProtection = (pAd->CommonCfg.UseBGProtection == 1) ||    // always use
-								   ((pAd->CommonCfg.UseBGProtection == 0) && ERP_IS_USE_PROTECTION(Erp));
-
-				if (pAd->CommonCfg.Channel > 14) // always no BG protection in A-band. falsely happened when switching A/G band to a dual-band AP
-					bUseBGProtection = FALSE;
-
-				if (bUseBGProtection != OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_BG_PROTECTION_INUSED))
-				{
-					if (bUseBGProtection)
-					{
-						OPSTATUS_SET_FLAG(pAd, fOP_STATUS_BG_PROTECTION_INUSED);
-						AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode, (OFDMSETPROTECT|CCKSETPROTECT|ALLN_SETPROTECT),FALSE,(pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent == 1));
-					}
-					else
-					{
-						OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_BG_PROTECTION_INUSED);
-						AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode, (OFDMSETPROTECT|CCKSETPROTECT|ALLN_SETPROTECT),TRUE,(pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent == 1));
-					}
-
-					DBGPRINT(RT_DEBUG_WARN, ("SYNC - AP changed B/G protection to %d\n", bUseBGProtection));
-				}
-
-#ifdef DOT11_N_SUPPORT
-				// check Ht protection mode. and adhere to the Non-GF device indication by AP.
-				if ((AddHtInfoLen != 0) &&
-					((AddHtInfo.AddHtInfo2.OperaionMode != pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode) ||
-					(AddHtInfo.AddHtInfo2.NonGfPresent != pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent)))
-				{
-					pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent = AddHtInfo.AddHtInfo2.NonGfPresent;
-					pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode = AddHtInfo.AddHtInfo2.OperaionMode;
-					if (pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent == 1)
-				{
-						AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode, ALLN_SETPROTECT, FALSE, TRUE);
-					}
-					else
-						AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode, ALLN_SETPROTECT, FALSE, FALSE);
-
-					DBGPRINT(RT_DEBUG_TRACE, ("SYNC - AP changed N OperaionMode to %d\n", pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode));
-				}
-#endif // DOT11_N_SUPPORT //
-
-				if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED) &&
-					ERP_IS_USE_BARKER_PREAMBLE(Erp))
-				{
-					MlmeSetTxPreamble(pAd, Rt802_11PreambleLong);
-					DBGPRINT(RT_DEBUG_TRACE, ("SYNC - AP forced to use LONG preamble\n"));
-				}
-
-				if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED)    &&
-					(EdcaParm.bValid == TRUE)                          &&
-					(EdcaParm.EdcaUpdateCount != pAd->CommonCfg.APEdcaParm.EdcaUpdateCount))
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("SYNC - AP change EDCA parameters(from %d to %d)\n",
-						pAd->CommonCfg.APEdcaParm.EdcaUpdateCount,
-						EdcaParm.EdcaUpdateCount));
-					AsicSetEdcaParm(pAd, &EdcaParm);
-				}
-
-				// copy QOS related information
-				NdisMoveMemory(&pAd->CommonCfg.APQbssLoad, &QbssLoad, sizeof(QBSS_LOAD_PARM));
-				NdisMoveMemory(&pAd->CommonCfg.APQosCapability, &QosCapability, sizeof(QOS_CAPABILITY_PARM));
-			}
-
-			// only INFRASTRUCTURE mode support power-saving feature
-			if ((INFRA_ON(pAd) && (pAd->StaCfg.Psm == PWR_SAVE)) || (pAd->CommonCfg.bAPSDForcePowerSave))
-			{
-				UCHAR FreeNumber;
-				//  1. AP has backlogged unicast-to-me frame, stay AWAKE, send PSPOLL
-				//  2. AP has backlogged broadcast/multicast frame and we want those frames, stay AWAKE
-				//  3. we have outgoing frames in TxRing or MgmtRing, better stay AWAKE
-				//  4. Psm change to PWR_SAVE, but AP not been informed yet, we better stay AWAKE
-				//  5. otherwise, put PHY back to sleep to save battery.
-				if (MessageToMe)
-				{
-					if (pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable &&
-						pAd->CommonCfg.bAPSDAC_BE && pAd->CommonCfg.bAPSDAC_BK && pAd->CommonCfg.bAPSDAC_VI && pAd->CommonCfg.bAPSDAC_VO)
-					{
-						pAd->CommonCfg.bNeedSendTriggerFrame = TRUE;
-					}
-					else
-						RT28XX_PS_POLL_ENQUEUE(pAd);
-				}
-				else if (BcastFlag && (DtimCount == 0) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM))
-				{
-				}
-				else if ((pAd->TxSwQueue[QID_AC_BK].Number != 0)													||
-						(pAd->TxSwQueue[QID_AC_BE].Number != 0)														||
-						(pAd->TxSwQueue[QID_AC_VI].Number != 0)														||
-						(pAd->TxSwQueue[QID_AC_VO].Number != 0)														||
-						(RTMPFreeTXDRequest(pAd, QID_AC_BK, TX_RING_SIZE - 1, &FreeNumber) != NDIS_STATUS_SUCCESS)	||
-						(RTMPFreeTXDRequest(pAd, QID_AC_BE, TX_RING_SIZE - 1, &FreeNumber) != NDIS_STATUS_SUCCESS)	||
-						(RTMPFreeTXDRequest(pAd, QID_AC_VI, TX_RING_SIZE - 1, &FreeNumber) != NDIS_STATUS_SUCCESS)	||
-						(RTMPFreeTXDRequest(pAd, QID_AC_VO, TX_RING_SIZE - 1, &FreeNumber) != NDIS_STATUS_SUCCESS)	||
-						(RTMPFreeTXDRequest(pAd, QID_MGMT, MGMT_RING_SIZE - 1, &FreeNumber) != NDIS_STATUS_SUCCESS))
-				{
-					// TODO: consider scheduled HCCA. might not be proper to use traditional DTIM-based power-saving scheme
-					// can we cheat here (i.e. just check MGMT & AC_BE) for better performance?
-				}
-				else
-				{
-					USHORT NextDtim = DtimCount;
-
-					if (NextDtim == 0)
-						NextDtim = DtimPeriod;
-
-					TbttNumToNextWakeUp = pAd->StaCfg.DefaultListenCount;
-					if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM) && (TbttNumToNextWakeUp > NextDtim))
-						TbttNumToNextWakeUp = NextDtim;
-
-					if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
-					{
-						AsicSleepThenAutoWakeup(pAd, TbttNumToNextWakeUp);
-					}
-				}
-			}
-		}
-		// not my BSSID, ignore it
-	}
-	// sanity check fail, ignore this frame
-}
-
-/*
-	==========================================================================
-	Description:
-		Receive PROBE REQ from remote peer when operating in IBSS mode
-	==========================================================================
- */
-VOID PeerProbeReqAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	UCHAR         Addr2[MAC_ADDR_LEN];
-	CHAR          Ssid[MAX_LEN_OF_SSID];
-	UCHAR         SsidLen;
-#ifdef DOT11_N_SUPPORT
-	UCHAR		  HtLen, AddHtLen, NewExtLen;
-#endif // DOT11_N_SUPPORT //
-	HEADER_802_11 ProbeRspHdr;
-	NDIS_STATUS   NStatus;
-	PUCHAR        pOutBuffer = NULL;
-	ULONG         FrameLen = 0;
-	LARGE_INTEGER FakeTimestamp;
-	UCHAR         DsLen = 1, IbssLen = 2;
-	UCHAR         LocalErpIe[3] = {IE_ERP, 1, 0};
-	BOOLEAN       Privacy;
-	USHORT        CapabilityInfo;
-	UCHAR		  RSNIe = IE_WPA;
-
-	if (! ADHOC_ON(pAd))
-		return;
-
-	if (PeerProbeReqSanity(pAd, Elem->Msg, Elem->MsgLen, Addr2, Ssid, &SsidLen))
-	{
-		if ((SsidLen == 0) || SSID_EQUAL(Ssid, SsidLen, pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen))
-		{
-			// allocate and send out ProbeRsp frame
-			NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-			if (NStatus != NDIS_STATUS_SUCCESS)
-				return;
-
-			//pAd->StaCfg.AtimWin = 0;  // ??????
-
-			Privacy = (pAd->StaCfg.WepStatus == Ndis802_11Encryption1Enabled) ||
-					  (pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled) ||
-					  (pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled);
-			CapabilityInfo = CAP_GENERATE(0, 1, Privacy, (pAd->CommonCfg.TxPreamble == Rt802_11PreambleShort), 0, 0);
-
-			MakeOutgoingFrame(pOutBuffer,                   &FrameLen,
-							  sizeof(HEADER_802_11),        &ProbeRspHdr,
-							  TIMESTAMP_LEN,                &FakeTimestamp,
-							  2,                            &pAd->CommonCfg.BeaconPeriod,
-							  2,                            &CapabilityInfo,
-							  1,                            &SsidIe,
-							  1,                            &pAd->CommonCfg.SsidLen,
-							  pAd->CommonCfg.SsidLen,       pAd->CommonCfg.Ssid,
-							  1,                            &SupRateIe,
-							  1,                            &pAd->StaActive.SupRateLen,
-							  pAd->StaActive.SupRateLen,    pAd->StaActive.SupRate,
-							  1,                            &DsIe,
-							  1,                            &DsLen,
-							  1,                            &pAd->CommonCfg.Channel,
-							  1,                            &IbssIe,
-							  1,                            &IbssLen,
-							  2,                            &pAd->StaActive.AtimWin,
-							  END_OF_ARGS);
-
-			if (pAd->StaActive.ExtRateLen)
-			{
-				ULONG tmp;
-				MakeOutgoingFrame(pOutBuffer + FrameLen,        &tmp,
-								  3,                            LocalErpIe,
-								  1,                            &ExtRateIe,
-								  1,                            &pAd->StaActive.ExtRateLen,
-								  pAd->StaActive.ExtRateLen,    &pAd->StaActive.ExtRate,
-								  END_OF_ARGS);
-				FrameLen += tmp;
-			}
-
-			// If adhoc secruity is set for WPA-None, append the cipher suite IE
-			if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
-			{
-				ULONG tmp;
-				MakeOutgoingFrame(pOutBuffer + FrameLen,        	&tmp,
-						  			1,                              &RSNIe,
-						  			1,                            	&pAd->StaCfg.RSNIE_Len,
-						  			pAd->StaCfg.RSNIE_Len,      	pAd->StaCfg.RSN_IE,
-						  			END_OF_ARGS);
-				FrameLen += tmp;
-			}
-#ifdef DOT11_N_SUPPORT
-			if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
-			{
-				ULONG TmpLen;
-				UCHAR	BROADCOM[4] = {0x0, 0x90, 0x4c, 0x33};
-				HtLen = sizeof(pAd->CommonCfg.HtCapability);
-				AddHtLen = sizeof(pAd->CommonCfg.AddHTInfo);
-				NewExtLen = 1;
-				//New extension channel offset IE is included in Beacon, Probe Rsp or channel Switch Announcement Frame
-				if (pAd->bBroadComHT == TRUE)
-				{
-					MakeOutgoingFrame(pOutBuffer + FrameLen,            &TmpLen,
-								  1,                                &WpaIe,
-								  4,                                &BROADCOM[0],
-								 pAd->MlmeAux.HtCapabilityLen,          &pAd->MlmeAux.HtCapability,
-								  END_OF_ARGS);
-				}
-				else
-				{
-				MakeOutgoingFrame(pOutBuffer + FrameLen,            &TmpLen,
-								  1,                                &HtCapIe,
-								  1,                                &HtLen,
-								 sizeof(HT_CAPABILITY_IE),          &pAd->CommonCfg.HtCapability,
-								  1,                                &AddHtInfoIe,
-								  1,                                &AddHtLen,
-								 sizeof(ADD_HT_INFO_IE),          &pAd->CommonCfg.AddHTInfo,
-								  1,                                &NewExtChanIe,
-								  1,                                &NewExtLen,
-								 sizeof(NEW_EXT_CHAN_IE),          &pAd->CommonCfg.NewExtChanOffset,
-								  END_OF_ARGS);
-				}
-				FrameLen += TmpLen;
-			}
-#endif // DOT11_N_SUPPORT //
-			MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-			MlmeFreeMemory(pAd, pOutBuffer);
-		}
-	}
-}
-
-VOID BeaconTimeoutAtJoinAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT Status;
-	DBGPRINT(RT_DEBUG_TRACE, ("SYNC - BeaconTimeoutAtJoinAction\n"));
-	pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
-	Status = MLME_REJ_TIMEOUT;
-	MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_JOIN_CONF, 2, &Status);
-}
-
-/*
-	==========================================================================
-	Description:
-		Scan timeout procedure. basically add channel index by 1 and rescan
-	==========================================================================
- */
-VOID ScanTimeoutAction(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	pAd->MlmeAux.Channel = NextChannel(pAd, pAd->MlmeAux.Channel);
-
-	// Only one channel scanned for CISCO beacon request
-	if ((pAd->MlmeAux.ScanType == SCAN_CISCO_ACTIVE) ||
-		(pAd->MlmeAux.ScanType == SCAN_CISCO_PASSIVE) ||
-		(pAd->MlmeAux.ScanType == SCAN_CISCO_NOISE) ||
-		(pAd->MlmeAux.ScanType == SCAN_CISCO_CHANNEL_LOAD))
-		pAd->MlmeAux.Channel = 0;
-
-	// this routine will stop if pAd->MlmeAux.Channel == 0
-	ScanNextChannel(pAd);
-}
-
-/*
-	==========================================================================
-	Description:
-	==========================================================================
- */
-VOID InvalidStateWhenScan(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT Status;
-	DBGPRINT(RT_DEBUG_TRACE, ("AYNC - InvalidStateWhenScan(state=%ld). Reset SYNC machine\n", pAd->Mlme.SyncMachine.CurrState));
-	pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
-	Status = MLME_STATE_MACHINE_REJECT;
-	MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_SCAN_CONF, 2, &Status);
-}
-
-/*
-	==========================================================================
-	Description:
-	==========================================================================
- */
-VOID InvalidStateWhenJoin(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT Status;
-	DBGPRINT(RT_DEBUG_TRACE, ("InvalidStateWhenJoin(state=%ld). Reset SYNC machine\n", pAd->Mlme.SyncMachine.CurrState));
-	pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
-	Status = MLME_STATE_MACHINE_REJECT;
-	MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_JOIN_CONF, 2, &Status);
-}
-
-/*
-	==========================================================================
-	Description:
-	==========================================================================
- */
-VOID InvalidStateWhenStart(
-	IN PRTMP_ADAPTER pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	USHORT Status;
-	DBGPRINT(RT_DEBUG_TRACE, ("InvalidStateWhenStart(state=%ld). Reset SYNC machine\n", pAd->Mlme.SyncMachine.CurrState));
-	pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
-	Status = MLME_STATE_MACHINE_REJECT;
-	MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_START_CONF, 2, &Status);
-}
-
-/*
-	==========================================================================
-	Description:
-
-	IRQL = DISPATCH_LEVEL
-
-	==========================================================================
- */
-VOID EnqueuePsPoll(
-	IN PRTMP_ADAPTER pAd)
-{
-#ifdef RALINK_ATE
-    if (ATE_ON(pAd))
-    {
-		return;
-    }
-#endif // RALINK_ATE //
-
-
-	if (pAd->StaCfg.WindowsPowerMode == Ndis802_11PowerModeLegacy_PSP)
-    	pAd->PsPollFrame.FC.PwrMgmt = PWR_SAVE;
-	MiniportMMRequest(pAd, 0, (PUCHAR)&pAd->PsPollFrame, sizeof(PSPOLL_FRAME));
-}
-
-
-/*
-	==========================================================================
-	Description:
-	==========================================================================
- */
-VOID EnqueueProbeRequest(
-	IN PRTMP_ADAPTER pAd)
-{
-	NDIS_STATUS     NState;
-	PUCHAR          pOutBuffer;
-	ULONG           FrameLen = 0;
-	HEADER_802_11   Hdr80211;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("force out a ProbeRequest ...\n"));
-
-	NState = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
-	if (NState == NDIS_STATUS_SUCCESS)
-	{
-		MgtMacHeaderInit(pAd, &Hdr80211, SUBTYPE_PROBE_REQ, 0, BROADCAST_ADDR, BROADCAST_ADDR);
-
-		// this ProbeRequest explicitly specify SSID to reduce unwanted ProbeResponse
-		MakeOutgoingFrame(pOutBuffer,                     &FrameLen,
-						  sizeof(HEADER_802_11),          &Hdr80211,
-						  1,                              &SsidIe,
-						  1,                              &pAd->CommonCfg.SsidLen,
-						  pAd->CommonCfg.SsidLen,		  pAd->CommonCfg.Ssid,
-						  1,                              &SupRateIe,
-						  1,                              &pAd->StaActive.SupRateLen,
-						  pAd->StaActive.SupRateLen,      pAd->StaActive.SupRate,
-						  END_OF_ARGS);
-		MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-		MlmeFreeMemory(pAd, pOutBuffer);
-	}
-
-}
-
-#ifdef DOT11_N_SUPPORT
-#ifdef DOT11N_DRAFT3
-VOID BuildEffectedChannelList(
-	IN PRTMP_ADAPTER pAd)
-{
-	UCHAR		EChannel[11];
-	UCHAR		i, j, k;
-	UCHAR		UpperChannel = 0, LowerChannel = 0;
-
-	RTMPZeroMemory(EChannel, 11);
-	i = 0;
-	// Find upper channel and lower channel.
-	if (pAd->CommonCfg.CentralChannel < pAd->CommonCfg.Channel)
-	{
-		UpperChannel = pAd->CommonCfg.Channel;
-		LowerChannel = pAd->CommonCfg.CentralChannel;
-	}
-	else if (pAd->CommonCfg.CentralChannel > pAd->CommonCfg.Channel)
-	{
-		UpperChannel = pAd->CommonCfg.CentralChannel;
-		LowerChannel = pAd->CommonCfg.Channel;
-	}
-	else
-	{
-		return;
-	}
-
-	// Record channels that is below lower channel..
-	if (LowerChannel > 1)
-	{
-		EChannel[0] = LowerChannel - 1;
-		i = 1;
-		if (LowerChannel > 2)
-		{
-			EChannel[1] = LowerChannel - 2;
-			i = 2;
-			if (LowerChannel > 3)
-			{
-				EChannel[2] = LowerChannel - 3;
-				i = 3;
-			}
-		}
-	}
-	// Record channels that is between  lower channel and upper channel.
-	for (k = LowerChannel;k < UpperChannel;k++)
-	{
-		EChannel[i] = k;
-		i++;
-	}
-	// Record channels that is above upper channel..
-	if (LowerChannel < 11)
-	{
-		EChannel[i] = UpperChannel + 1;
-		i++;
-		if (LowerChannel < 10)
-		{
-			EChannel[i] = LowerChannel + 2;
-			i++;
-			if (LowerChannel < 9)
-			{
-				EChannel[i] = LowerChannel + 3;
-				i++;
-			}
-		}
-	}
-	//
-	for (j = 0;j < i;j++)
-	{
-		for (k = 0;k < pAd->ChannelListNum;k++)
-		{
-			if (pAd->ChannelList[k].Channel == EChannel[j])
-			{
-				pAd->ChannelList[k].bEffectedChannel = TRUE;
-				DBGPRINT(RT_DEBUG_TRACE,(" EffectedChannel( =%d)\n", EChannel[j]));
-				break;
-			}
-		}
-	}
-}
-#endif // DOT11N_DRAFT3 //
-#endif // DOT11_N_SUPPORT //
-
-BOOLEAN ScanRunning(
-		IN PRTMP_ADAPTER pAd)
-{
-	return (pAd->Mlme.SyncMachine.CurrState == SCAN_LISTEN) ? TRUE : FALSE;
-}
-
+#include "../../rt2870/sta/sync.c"
diff --git a/drivers/staging/rt3070/sta/wpa.c b/drivers/staging/rt3070/sta/wpa.c
index 63d08306bf6..95543bb1f0e 100644
--- a/drivers/staging/rt3070/sta/wpa.c
+++ b/drivers/staging/rt3070/sta/wpa.c
@@ -1,2099 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	wpa.c
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Jan	Lee		03-07-22		Initial
-	Paul Lin	03-11-28		Modify for supplicant
-*/
-#include "../rt_config.h"
-
-#define		WPARSNIE	0xdd
-#define		WPA2RSNIE	0x30
-
-//extern UCHAR BIT8[];
-UCHAR	CipherWpaPskTkip[] = {
-		0xDD, 0x16,				// RSN IE
-		0x00, 0x50, 0xf2, 0x01,	// oui
-		0x01, 0x00,				// Version
-		0x00, 0x50, 0xf2, 0x02,	// Multicast
-		0x01, 0x00,				// Number of unicast
-		0x00, 0x50, 0xf2, 0x02,	// unicast
-		0x01, 0x00,				// number of authentication method
-		0x00, 0x50, 0xf2, 0x02	// authentication
-		};
-UCHAR	CipherWpaPskTkipLen = (sizeof(CipherWpaPskTkip) / sizeof(UCHAR));
-
-UCHAR	CipherWpaPskAes[] = {
-		0xDD, 0x16, 			// RSN IE
-		0x00, 0x50, 0xf2, 0x01,	// oui
-		0x01, 0x00,				// Version
-		0x00, 0x50, 0xf2, 0x04,	// Multicast
-		0x01, 0x00,				// Number of unicast
-		0x00, 0x50, 0xf2, 0x04,	// unicast
-		0x01, 0x00,				// number of authentication method
-		0x00, 0x50, 0xf2, 0x02	// authentication
-		};
-UCHAR	CipherWpaPskAesLen = (sizeof(CipherWpaPskAes) / sizeof(UCHAR));
-
-UCHAR	CipherSuiteCiscoCCKM[] = {
-		0xDD, 0x16,				// RSN IE
-		0x00, 0x50, 0xf2, 0x01, // oui
-		0x01, 0x00,				// Version
-		0x00, 0x40, 0x96, 0x01, // Multicast
-		0x01, 0x00,				// Number of uicast
-		0x00, 0x40, 0x96, 0x01, // unicast
-		0x01, 0x00,				// number of authentication method
-		0x00, 0x40, 0x96, 0x00  // Authentication
-		};
-UCHAR	CipherSuiteCiscoCCKMLen = (sizeof(CipherSuiteCiscoCCKM) / sizeof(UCHAR));
-
-UCHAR	CipherSuiteCiscoCCKM24[] = {
-		0xDD, 0x18,				// RSN IE
-		0x00, 0x50, 0xf2, 0x01, // oui
-		0x01, 0x00,				// Version
-		0x00, 0x40, 0x96, 0x01, // Multicast
-		0x01, 0x00,				// Number of uicast
-		0x00, 0x40, 0x96, 0x01, // unicast
-		0x01, 0x00,				// number of authentication method
-		0x00, 0x40, 0x96, 0x00,
-		0x28, 0x00// Authentication
-		};
-
-UCHAR	CipherSuiteCiscoCCKM24Len = (sizeof(CipherSuiteCiscoCCKM24) / sizeof(UCHAR));
-
-UCHAR	CipherSuiteCCXTkip[] = {
-		0xDD, 0x16,				// RSN IE
-		0x00, 0x50, 0xf2, 0x01,	// oui
-		0x01, 0x00,				// Version
-		0x00, 0x50, 0xf2, 0x02,	// Multicast
-		0x01, 0x00,				// Number of unicast
-		0x00, 0x50, 0xf2, 0x02,	// unicast
-		0x01, 0x00,				// number of authentication method
-		0x00, 0x50, 0xf2, 0x01	// authentication
-		};
-UCHAR	CipherSuiteCCXTkipLen = (sizeof(CipherSuiteCCXTkip) / sizeof(UCHAR));
-
-UCHAR	CCX_LLC_HDR[] = {0xAA, 0xAA, 0x03, 0x00, 0x40, 0x96, 0x00, 0x02};
-UCHAR	LLC_NORMAL[] = {0xAA, 0xAA, 0x03, 0x00, 0x00, 0x00};
-
-UCHAR	EAPOL_FRAME[] = {0x88, 0x8E};
-
-BOOLEAN CheckRSNIE(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pData,
-	IN  UCHAR           DataLen,
-	OUT	UCHAR			*Offset);
-
-void inc_byte_array(UCHAR *counter, int len);
-
-/*
-	========================================================================
-
-	Routine Description:
-		Classify WPA EAP message type
-
-	Arguments:
-		EAPType		Value of EAP message type
-		MsgType		Internal Message definition for MLME state machine
-
-	Return Value:
-		TRUE		Found appropriate message type
-		FALSE		No appropriate message type
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-		All these constants are defined in wpa.h
-		For supplicant, there is only EAPOL Key message avaliable
-
-	========================================================================
-*/
-BOOLEAN	WpaMsgTypeSubst(
-	IN	UCHAR	EAPType,
-	OUT	INT		*MsgType)
-{
-	switch (EAPType)
-	{
-		case EAPPacket:
-			*MsgType = MT2_EAPPacket;
-			break;
-		case EAPOLStart:
-			*MsgType = MT2_EAPOLStart;
-			break;
-		case EAPOLLogoff:
-			*MsgType = MT2_EAPOLLogoff;
-			break;
-		case EAPOLKey:
-			*MsgType = MT2_EAPOLKey;
-			break;
-		case EAPOLASFAlert:
-			*MsgType = MT2_EAPOLASFAlert;
-			break;
-		default:
-			return FALSE;
-	}
-	return TRUE;
-}
-
-/*
-	==========================================================================
-	Description:
-		association	state machine init,	including state	transition and timer init
-	Parameters:
-		S -	pointer	to the association state machine
-	==========================================================================
- */
-VOID WpaPskStateMachineInit(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	STATE_MACHINE *S,
-	OUT	STATE_MACHINE_FUNC Trans[])
-{
-	StateMachineInit(S,	Trans, MAX_WPA_PSK_STATE, MAX_WPA_PSK_MSG, (STATE_MACHINE_FUNC)Drop, WPA_PSK_IDLE, WPA_MACHINE_BASE);
-	StateMachineSetAction(S, WPA_PSK_IDLE, MT2_EAPOLKey, (STATE_MACHINE_FUNC)WpaEAPOLKeyAction);
-}
-
-/*
-	==========================================================================
-	Description:
-		This is	state machine function.
-		When receiving EAPOL packets which is  for 802.1x key management.
-		Use	both in	WPA, and WPAPSK	case.
-		In this	function, further dispatch to different	functions according	to the received	packet.	 3 categories are :
-		  1.  normal 4-way pairwisekey and 2-way groupkey handshake
-		  2.  MIC error	(Countermeasures attack)  report packet	from STA.
-		  3.  Request for pairwise/group key update	from STA
-	Return:
-	==========================================================================
-*/
-VOID WpaEAPOLKeyAction(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MLME_QUEUE_ELEM	*Elem)
-
-{
-	INT             MsgType = EAPOL_MSG_INVALID;
-	PKEY_DESCRIPTER pKeyDesc;
-	PHEADER_802_11  pHeader; //red
-	UCHAR           ZeroReplay[LEN_KEY_DESC_REPLAY];
-	UCHAR EapolVr;
-	KEY_INFO		peerKeyInfo;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("-----> WpaEAPOLKeyAction\n"));
-
-	// Get 802.11 header first
-	pHeader = (PHEADER_802_11) Elem->Msg;
-
-	// Get EAPoL-Key Descriptor
-	pKeyDesc = (PKEY_DESCRIPTER) &Elem->Msg[(LENGTH_802_11 + LENGTH_802_1_H + LENGTH_EAPOL_H)];
-
-	NdisZeroMemory((PUCHAR)&peerKeyInfo, sizeof(peerKeyInfo));
-	NdisMoveMemory((PUCHAR)&peerKeyInfo, (PUCHAR)&pKeyDesc->KeyInfo, sizeof(KEY_INFO));
-
-	*((USHORT *)&peerKeyInfo) = cpu2le16(*((USHORT *)&peerKeyInfo));
-
-
-	// 1. Check EAPOL frame version and type
-	EapolVr	= (UCHAR) Elem->Msg[LENGTH_802_11+LENGTH_802_1_H];
-
-    if (((EapolVr != EAPOL_VER) && (EapolVr != EAPOL_VER2)) || ((pKeyDesc->Type != WPA1_KEY_DESC) && (pKeyDesc->Type != WPA2_KEY_DESC)))
-	{
-        DBGPRINT(RT_DEBUG_ERROR, ("Key descripter does not match with WPA rule\n"));
-			return;
-	}
-
-	// First validate replay counter, only accept message with larger replay counter
-	// Let equal pass, some AP start with all zero replay counter
-	NdisZeroMemory(ZeroReplay, LEN_KEY_DESC_REPLAY);
-
-	if((RTMPCompareMemory(pKeyDesc->ReplayCounter, pAd->StaCfg.ReplayCounter, LEN_KEY_DESC_REPLAY) != 1) &&
-		(RTMPCompareMemory(pKeyDesc->ReplayCounter, ZeroReplay, LEN_KEY_DESC_REPLAY) != 0))
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("   ReplayCounter not match   \n"));
-		return;
-	}
-
-	// Process WPA2PSK frame
-	if(pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)
-	{
-		if((peerKeyInfo.KeyType == PAIRWISEKEY) &&
-			(peerKeyInfo.EKD_DL == 0) &&
-			(peerKeyInfo.KeyAck == 1) &&
-			(peerKeyInfo.KeyMic == 0) &&
-			(peerKeyInfo.Secure == 0) &&
-			(peerKeyInfo.Error == 0) &&
-			(peerKeyInfo.Request == 0))
-		{
-			MsgType = EAPOL_PAIR_MSG_1;
-			DBGPRINT(RT_DEBUG_TRACE, ("Receive EAPOL Key Pairwise Message 1\n"));
-		} else if((peerKeyInfo.KeyType == PAIRWISEKEY) &&
-			(peerKeyInfo.EKD_DL  == 1) &&
-			(peerKeyInfo.KeyAck == 1) &&
-			(peerKeyInfo.KeyMic == 1) &&
-			(peerKeyInfo.Secure == 1) &&
-			(peerKeyInfo.Error == 0) &&
-			(peerKeyInfo.Request == 0))
-		{
-			MsgType = EAPOL_PAIR_MSG_3;
-			DBGPRINT(RT_DEBUG_TRACE, ("Receive EAPOL Key Pairwise Message 3\n"));
-		} else if((peerKeyInfo.KeyType == GROUPKEY) &&
-			(peerKeyInfo.EKD_DL == 1) &&
-			(peerKeyInfo.KeyAck == 1) &&
-			(peerKeyInfo.KeyMic == 1) &&
-			(peerKeyInfo.Secure == 1) &&
-			(peerKeyInfo.Error == 0) &&
-			(peerKeyInfo.Request == 0))
-		{
-			MsgType = EAPOL_GROUP_MSG_1;
-			DBGPRINT(RT_DEBUG_TRACE, ("Receive EAPOL Key Group Message 1\n"));
-		}
-
-		// We will assume link is up (assoc suceess and port not secured).
-		// All state has to be able to process message from previous state
-		switch(pAd->StaCfg.WpaState)
-		{
-		case SS_START:
-			if(MsgType == EAPOL_PAIR_MSG_1)
-			{
-				Wpa2PairMsg1Action(pAd, Elem);
-				pAd->StaCfg.WpaState = SS_WAIT_MSG_3;
-			}
-			break;
-
-		case SS_WAIT_MSG_3:
-			if(MsgType == EAPOL_PAIR_MSG_1)
-			{
-				Wpa2PairMsg1Action(pAd, Elem);
-				pAd->StaCfg.WpaState = SS_WAIT_MSG_3;
-			}
-			else if(MsgType == EAPOL_PAIR_MSG_3)
-			{
-				Wpa2PairMsg3Action(pAd, Elem);
-				pAd->StaCfg.WpaState = SS_WAIT_GROUP;
-			}
-			break;
-
-		case SS_WAIT_GROUP:		// When doing group key exchange
-		case SS_FINISH:			// This happened when update group key
-			if(MsgType == EAPOL_PAIR_MSG_1)
-			{
-			    // Reset port secured variable
-				pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-				Wpa2PairMsg1Action(pAd, Elem);
-				pAd->StaCfg.WpaState = SS_WAIT_MSG_3;
-			}
-			else if(MsgType == EAPOL_PAIR_MSG_3)
-			{
-			    // Reset port secured variable
-				pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-				Wpa2PairMsg3Action(pAd, Elem);
-				pAd->StaCfg.WpaState = SS_WAIT_GROUP;
-			}
-			else if(MsgType == EAPOL_GROUP_MSG_1)
-			{
-				WpaGroupMsg1Action(pAd, Elem);
-				pAd->StaCfg.WpaState = SS_FINISH;
-			}
-			break;
-
-		default:
-			break;
-		}
-	}
-	// Process WPAPSK Frame
-	// Classify message Type, either pairwise message 1, 3, or group message 1 for supplicant
-	else if(pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK)
-	{
-		if((peerKeyInfo.KeyType == PAIRWISEKEY) &&
-			(peerKeyInfo.KeyIndex == 0) &&
-			(peerKeyInfo.KeyAck == 1) &&
-			(peerKeyInfo.KeyMic == 0) &&
-			(peerKeyInfo.Secure == 0) &&
-			(peerKeyInfo.Error == 0) &&
-			(peerKeyInfo.Request == 0))
-		{
-			MsgType = EAPOL_PAIR_MSG_1;
-			DBGPRINT(RT_DEBUG_TRACE, ("Receive EAPOL Key Pairwise Message 1\n"));
-		}
-		else if((peerKeyInfo.KeyType == PAIRWISEKEY) &&
-			(peerKeyInfo.KeyIndex == 0) &&
-			(peerKeyInfo.KeyAck == 1) &&
-			(peerKeyInfo.KeyMic == 1) &&
-			(peerKeyInfo.Secure == 0) &&
-			(peerKeyInfo.Error == 0) &&
-			(peerKeyInfo.Request == 0))
-		{
-			MsgType = EAPOL_PAIR_MSG_3;
-			DBGPRINT(RT_DEBUG_TRACE, ("Receive EAPOL Key Pairwise Message 3\n"));
-		}
-		else if((peerKeyInfo.KeyType == GROUPKEY) &&
-			(peerKeyInfo.KeyIndex != 0) &&
-			(peerKeyInfo.KeyAck == 1) &&
-			(peerKeyInfo.KeyMic == 1) &&
-			(peerKeyInfo.Secure == 1) &&
-			(peerKeyInfo.Error == 0) &&
-			(peerKeyInfo.Request == 0))
-		{
-			MsgType = EAPOL_GROUP_MSG_1;
-			DBGPRINT(RT_DEBUG_TRACE, ("Receive EAPOL Key Group Message 1\n"));
-		}
-
-		// We will assume link is up (assoc suceess and port not secured).
-		// All state has to be able to process message from previous state
-		switch(pAd->StaCfg.WpaState)
-		{
-		case SS_START:
-			if(MsgType == EAPOL_PAIR_MSG_1)
-			{
-				WpaPairMsg1Action(pAd, Elem);
-				pAd->StaCfg.WpaState = SS_WAIT_MSG_3;
-			}
-			break;
-
-		case SS_WAIT_MSG_3:
-			if(MsgType == EAPOL_PAIR_MSG_1)
-			{
-				WpaPairMsg1Action(pAd, Elem);
-				pAd->StaCfg.WpaState = SS_WAIT_MSG_3;
-			}
-			else if(MsgType == EAPOL_PAIR_MSG_3)
-			{
-				WpaPairMsg3Action(pAd, Elem);
-				pAd->StaCfg.WpaState = SS_WAIT_GROUP;
-			}
-			break;
-
-		case SS_WAIT_GROUP:		// When doing group key exchange
-		case SS_FINISH:			// This happened when update group key
-			if(MsgType == EAPOL_PAIR_MSG_1)
-			{
-				WpaPairMsg1Action(pAd, Elem);
-				pAd->StaCfg.WpaState = SS_WAIT_MSG_3;
-				// Reset port secured variable
-				pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-			}
-			else if(MsgType == EAPOL_PAIR_MSG_3)
-			{
-				WpaPairMsg3Action(pAd, Elem);
-				pAd->StaCfg.WpaState = SS_WAIT_GROUP;
-				// Reset port secured variable
-				pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-			}
-			else if(MsgType == EAPOL_GROUP_MSG_1)
-			{
-				WpaGroupMsg1Action(pAd, Elem);
-				pAd->StaCfg.WpaState = SS_FINISH;
-			}
-			break;
-
-		default:
-			break;
-		}
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<----- WpaEAPOLKeyAction\n"));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Process Pairwise key 4-way handshaking
-
-	Arguments:
-		pAd	Pointer	to our adapter
-		Elem		Message body
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	WpaPairMsg1Action(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem)
-{
-	PHEADER_802_11      pHeader;
-	UCHAR				*mpool, *PTK, *digest;
-	PUCHAR              pOutBuffer = NULL;
-	UCHAR               Header802_3[14];
-	ULONG               FrameLen = 0;
-	PEAPOL_PACKET       pMsg1;
-	EAPOL_PACKET        Packet;
-	UCHAR               Mic[16];
-
-	DBGPRINT(RT_DEBUG_TRACE, ("WpaPairMsg1Action ----->\n"));
-
-	// allocate memory pool
-	os_alloc_mem(pAd, (PUCHAR *)&mpool, 256);
-
-	if (mpool == NULL)
-		return;
-
-	// PTK Len = 80.
-	PTK = (UCHAR *) ROUND_UP(mpool, 4);
-	// digest Len = 80.
-	digest = (UCHAR *) ROUND_UP(PTK + 80, 4);
-
-	pHeader = (PHEADER_802_11) Elem->Msg;
-
-	// Process message 1 from authenticator
-	pMsg1 = (PEAPOL_PACKET) &Elem->Msg[LENGTH_802_11 + LENGTH_802_1_H];
-
-	// 1. Save Replay counter, it will use to verify message 3 and construct message 2
-	NdisMoveMemory(pAd->StaCfg.ReplayCounter, pMsg1->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-
-	// 2. Save ANonce
-	NdisMoveMemory(pAd->StaCfg.ANonce, pMsg1->KeyDesc.KeyNonce, LEN_KEY_DESC_NONCE);
-
-	// Generate random SNonce
-	GenRandom(pAd, pAd->CurrentAddress, pAd->StaCfg.SNonce);
-
-	// Calc PTK(ANonce, SNonce)
-	WpaCountPTK(pAd,
-		pAd->StaCfg.PMK,
-		pAd->StaCfg.ANonce,
-		pAd->CommonCfg.Bssid,
-		pAd->StaCfg.SNonce,
-		pAd->CurrentAddress,
-		PTK,
-		LEN_PTK);
-
-	// Save key to PTK entry
-	NdisMoveMemory(pAd->StaCfg.PTK, PTK, LEN_PTK);
-
-	// init 802.3 header and Fill Packet
-	MAKE_802_3_HEADER(Header802_3, pAd->CommonCfg.Bssid, pAd->CurrentAddress, EAPOL);
-
-	// Zero Message 2 body
-	NdisZeroMemory(&Packet, sizeof(Packet));
-	Packet.ProVer	= EAPOL_VER;
-	Packet.ProType	= EAPOLKey;
-	//
-	// Message 2 as  EAPOL-Key(0,1,0,0,0,P,0,SNonce,MIC,RSN IE)
-	//
-	Packet.KeyDesc.Type = WPA1_KEY_DESC;
-	// 1. Key descriptor version and appropriate RSN IE
-	if(pAd->StaCfg.WepStatus  == Ndis802_11Encryption3Enabled)
-	{
-		Packet.KeyDesc.KeyInfo.KeyDescVer = 2;
-	}
-	else	  // TKIP
-	{
-		Packet.KeyDesc.KeyInfo.KeyDescVer = 1;
-	}
-
-	// fill in Data Material and its length
-	Packet.KeyDesc.KeyData[0] = IE_WPA;
-	Packet.KeyDesc.KeyData[1] = pAd->StaCfg.RSNIE_Len;
-	Packet.KeyDesc.KeyDataLen[1] = pAd->StaCfg.RSNIE_Len + 2;
-	NdisMoveMemory(&Packet.KeyDesc.KeyData[2], pAd->StaCfg.RSN_IE, pAd->StaCfg.RSNIE_Len);
-
-	// Update packet length after decide Key data payload
-	Packet.Body_Len[1]  = sizeof(KEY_DESCRIPTER) - MAX_LEN_OF_RSNIE + Packet.KeyDesc.KeyDataLen[1];
-
-	// Update Key length
-	Packet.KeyDesc.KeyLength[0] = pMsg1->KeyDesc.KeyLength[0];
-	Packet.KeyDesc.KeyLength[1] = pMsg1->KeyDesc.KeyLength[1];
-	// 2. Key Type PeerKey
-	Packet.KeyDesc.KeyInfo.KeyType = PAIRWISEKEY;
-
-	// 3. KeyMic field presented
-	Packet.KeyDesc.KeyInfo.KeyMic  = 1;
-
-	//Convert to little-endian format.
-	*((USHORT *)&Packet.KeyDesc.KeyInfo) = cpu2le16(*((USHORT *)&Packet.KeyDesc.KeyInfo));
-
-
-	// 4. Fill SNonce
-	NdisMoveMemory(Packet.KeyDesc.KeyNonce, pAd->StaCfg.SNonce, LEN_KEY_DESC_NONCE);
-
-	// 5. Key Replay Count
-	NdisMoveMemory(Packet.KeyDesc.ReplayCounter, pAd->StaCfg.ReplayCounter, LEN_KEY_DESC_REPLAY);
-
-	// Send EAPOL(0, 1, 0, 0, 0, P, 0, SNonce, MIC, RSN_IE)
-	// Out buffer for transmitting message 2
-	MlmeAllocateMemory(pAd, (PUCHAR *)&pOutBuffer);  // allocate memory
-	if(pOutBuffer == NULL)
-	{
-		os_free_mem(pAd, mpool);
-		return;
-	}
-	// Prepare EAPOL frame for MIC calculation
-	// Be careful, only EAPOL frame is counted for MIC calculation
-	MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-		Packet.Body_Len[1] + 4,    &Packet,
-		END_OF_ARGS);
-
-	// 6. Prepare and Fill MIC value
-	NdisZeroMemory(Mic, sizeof(Mic));
-	if(pAd->StaCfg.WepStatus  == Ndis802_11Encryption3Enabled)
-	{	// AES
-
-		HMAC_SHA1(pOutBuffer, FrameLen, PTK, LEN_EAP_MICK, digest);
-		NdisMoveMemory(Mic, digest, LEN_KEY_DESC_MIC);
-	}
-	else
-	{	// TKIP
-		hmac_md5(PTK,  LEN_EAP_MICK, pOutBuffer, FrameLen, Mic);
-	}
-	NdisMoveMemory(Packet.KeyDesc.KeyMic, Mic, LEN_KEY_DESC_MIC);
-
-	//hex_dump("MIC", Mic, LEN_KEY_DESC_MIC);
-
-		MakeOutgoingFrame(pOutBuffer,           	&FrameLen,
-			  			LENGTH_802_3,     			&Header802_3,
-						Packet.Body_Len[1] + 4,    &Packet,
-						END_OF_ARGS);
-
-
-	// 5. Copy frame to Tx ring and send Msg 2 to authenticator
-	RTMPToWirelessSta(pAd, Header802_3, LENGTH_802_3, (PUCHAR)&Packet, Packet.Body_Len[1] + 4, TRUE);
-
-	MlmeFreeMemory(pAd, (PUCHAR)pOutBuffer);
-	os_free_mem(pAd, (PUCHAR)mpool);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("WpaPairMsg1Action <-----\n"));
-}
-
-VOID Wpa2PairMsg1Action(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem)
-{
-	PHEADER_802_11      pHeader;
-	UCHAR				*mpool, *PTK, *digest;
-	PUCHAR              pOutBuffer = NULL;
-	UCHAR               Header802_3[14];
-	ULONG               FrameLen = 0;
-	PEAPOL_PACKET       pMsg1;
-	EAPOL_PACKET        Packet;
-	UCHAR               Mic[16];
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Wpa2PairMsg1Action ----->\n"));
-
-	// allocate memory pool
-	os_alloc_mem(pAd, (PUCHAR *)&mpool, 256);
-
-	if (mpool == NULL)
-		return;
-
-	// PTK Len = 80.
-	PTK = (UCHAR *) ROUND_UP(mpool, 4);
-	// digest Len = 80.
-	digest = (UCHAR *) ROUND_UP(PTK + 80, 4);
-
-	pHeader = (PHEADER_802_11) Elem->Msg;
-
-	// Process message 1 from authenticator
-		pMsg1 = (PEAPOL_PACKET)	&Elem->Msg[LENGTH_802_11 + LENGTH_802_1_H];
-
-	// 1. Save Replay counter, it will use to verify message 3 and construct message 2
-	NdisMoveMemory(pAd->StaCfg.ReplayCounter, pMsg1->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-
-	// 2. Save ANonce
-	NdisMoveMemory(pAd->StaCfg.ANonce, pMsg1->KeyDesc.KeyNonce, LEN_KEY_DESC_NONCE);
-
-	// Generate random SNonce
-	GenRandom(pAd, pAd->CurrentAddress, pAd->StaCfg.SNonce);
-
-	if(pMsg1->KeyDesc.KeyDataLen[1] > 0 )
-	{
-		// cached PMKID
-	}
-
-	// Calc PTK(ANonce, SNonce)
-	WpaCountPTK(pAd,
-		pAd->StaCfg.PMK,
-		pAd->StaCfg.ANonce,
-		pAd->CommonCfg.Bssid,
-		pAd->StaCfg.SNonce,
-		pAd->CurrentAddress,
-		PTK,
-		LEN_PTK);
-
-	// Save key to PTK entry
-	NdisMoveMemory(pAd->StaCfg.PTK, PTK, LEN_PTK);
-
-	// init 802.3 header and Fill Packet
-	MAKE_802_3_HEADER(Header802_3, pAd->CommonCfg.Bssid, pAd->CurrentAddress, EAPOL);
-
-	// Zero message 2 body
-	NdisZeroMemory(&Packet, sizeof(Packet));
-	Packet.ProVer	= EAPOL_VER;
-	Packet.ProType	= EAPOLKey;
-	//
-	// Message 2 as  EAPOL-Key(0,1,0,0,0,P,0,SNonce,MIC,RSN IE)
-	//
-	Packet.KeyDesc.Type = WPA2_KEY_DESC;
-
-	// 1. Key descriptor version and appropriate RSN IE
-	if(pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled)
-	{
-		Packet.KeyDesc.KeyInfo.KeyDescVer = 2;
-	}
-	else	  // TKIP
-	{
-		Packet.KeyDesc.KeyInfo.KeyDescVer = 1;
-	}
-
-	// fill in Data Material and its length
-	Packet.KeyDesc.KeyData[0] = IE_WPA2;
-	Packet.KeyDesc.KeyData[1] = pAd->StaCfg.RSNIE_Len;
-	Packet.KeyDesc.KeyDataLen[1] = pAd->StaCfg.RSNIE_Len + 2;
-	NdisMoveMemory(&Packet.KeyDesc.KeyData[2], pAd->StaCfg.RSN_IE, pAd->StaCfg.RSNIE_Len);
-
-	// Update packet length after decide Key data payload
-	Packet.Body_Len[1]  = sizeof(KEY_DESCRIPTER) - MAX_LEN_OF_RSNIE + Packet.KeyDesc.KeyDataLen[1];
-
-	// 2. Key Type PeerKey
-	Packet.KeyDesc.KeyInfo.KeyType = PAIRWISEKEY;
-
-	// 3. KeyMic field presented
-	Packet.KeyDesc.KeyInfo.KeyMic  = 1;
-
-	// Update Key Length
-	Packet.KeyDesc.KeyLength[0] = 0;
-	Packet.KeyDesc.KeyLength[1] = pMsg1->KeyDesc.KeyLength[1];
-
-	// 4. Fill SNonce
-	NdisMoveMemory(Packet.KeyDesc.KeyNonce, pAd->StaCfg.SNonce, LEN_KEY_DESC_NONCE);
-
-	// 5. Key Replay Count
-	NdisMoveMemory(Packet.KeyDesc.ReplayCounter, pAd->StaCfg.ReplayCounter, LEN_KEY_DESC_REPLAY);
-
-	// Convert to little-endian format.
-	*((USHORT *)&Packet.KeyDesc.KeyInfo) = cpu2le16(*((USHORT *)&Packet.KeyDesc.KeyInfo));
-
-	// Send EAPOL-Key(0,1,0,0,0,P,0,SNonce,MIC,RSN IE)
-	// Out buffer for transmitting message 2
-	MlmeAllocateMemory(pAd,  (PUCHAR *)&pOutBuffer);  // allocate memory
-	if(pOutBuffer == NULL)
-	{
-		os_free_mem(pAd, mpool);
-		return;
-	}
-
-	// Prepare EAPOL frame for MIC calculation
-	// Be careful, only EAPOL frame is counted for MIC calculation
-	MakeOutgoingFrame(pOutBuffer,        &FrameLen,
-		Packet.Body_Len[1] + 4, &Packet,
-		END_OF_ARGS);
-
-	// 6. Prepare and Fill MIC value
-	NdisZeroMemory(Mic, sizeof(Mic));
-	if(pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled)
-	{
-		// AES
-		HMAC_SHA1(pOutBuffer, FrameLen, PTK, LEN_EAP_MICK, digest);
-		NdisMoveMemory(Mic, digest, LEN_KEY_DESC_MIC);
-	}
-	else
-	{
-		hmac_md5(PTK,  LEN_EAP_MICK, pOutBuffer, FrameLen, Mic);
-	}
-	NdisMoveMemory(Packet.KeyDesc.KeyMic, Mic, LEN_KEY_DESC_MIC);
-
-
-	// Make  Transmitting frame
-	MakeOutgoingFrame(pOutBuffer,           	&FrameLen,
-			  			LENGTH_802_3,     		&Header802_3,
-						Packet.Body_Len[1] + 4, &Packet,
-						END_OF_ARGS);
-
-
-	// 5. Copy frame to Tx ring
-	RTMPToWirelessSta(pAd, Header802_3, LENGTH_802_3, (PUCHAR)&Packet, Packet.Body_Len[1] + 4, TRUE);
-
-	MlmeFreeMemory(pAd, pOutBuffer);
-	os_free_mem(pAd, mpool);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Wpa2PairMsg1Action <-----\n"));
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Process Pairwise key 4-way handshaking
-
-	Arguments:
-		pAd	Pointer	to our adapter
-		Elem		Message body
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	WpaPairMsg3Action(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MLME_QUEUE_ELEM	*Elem)
-
-{
-	PHEADER_802_11      pHeader;
-	PUCHAR          	pOutBuffer = NULL;
-	UCHAR               Header802_3[14];
-	ULONG           	FrameLen = 0;
-	EAPOL_PACKET        Packet;
-	PEAPOL_PACKET       pMsg3;
-	UCHAR           	Mic[16], OldMic[16];
-	MAC_TABLE_ENTRY 	*pEntry = NULL;
-	UCHAR				skip_offset;
-	KEY_INFO			peerKeyInfo;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("WpaPairMsg3Action ----->\n"));
-
-	// Record 802.11 header & the received EAPOL packet Msg3
-	pHeader = (PHEADER_802_11) Elem->Msg;
-	pMsg3 = (PEAPOL_PACKET)	&Elem->Msg[LENGTH_802_11 + LENGTH_802_1_H];
-
-	NdisZeroMemory((PUCHAR)&peerKeyInfo, sizeof(peerKeyInfo));
-	NdisMoveMemory((PUCHAR)&peerKeyInfo, (PUCHAR)&pMsg3->KeyDesc.KeyInfo, sizeof(KEY_INFO));
-
-	*((USHORT*)&peerKeyInfo) = cpu2le16(*((USHORT*)&peerKeyInfo));
-
-
-	// 1. Verify cipher type match
-	if (pAd->StaCfg.WepStatus  == Ndis802_11Encryption3Enabled && (peerKeyInfo.KeyDescVer != 2))
-	{
-		return;
-	}
-	else if(pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled && (peerKeyInfo.KeyDescVer != 1))
-	{
-		return;
-	}
-
-	// Verify RSN IE
-	//if (!RTMPEqualMemory(pMsg3->KeyDesc.KeyData, pAd->MacTab.Content[BSSID_WCID].RSN_IE, pAd->MacTab.Content[BSSID_WCID].RSNIE_Len))
-	if (!CheckRSNIE(pAd, pMsg3->KeyDesc.KeyData, pMsg3->KeyDesc.KeyDataLen[1], &skip_offset))
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("RSN_IE Different in Msg 3 of WPA1 4-way handshake!! \n"));
-		hex_dump("The original RSN_IE", pAd->MacTab.Content[BSSID_WCID].RSN_IE, pAd->MacTab.Content[BSSID_WCID].RSNIE_Len);
-		hex_dump("The received RSN_IE", pMsg3->KeyDesc.KeyData, pMsg3->KeyDesc.KeyDataLen[1]);
-		return;
-	}
-	else
-		DBGPRINT(RT_DEBUG_TRACE, ("RSN_IE VALID in Msg 3 of WPA1 4-way handshake!! \n"));
-
-
-	// 2. Check MIC value
-	// Save the MIC and replace with zero
-	NdisMoveMemory(OldMic, pMsg3->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
-	NdisZeroMemory(pMsg3->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
-	if(pAd->StaCfg.WepStatus  == Ndis802_11Encryption3Enabled)
-	{
-		// AES
-		UCHAR digest[80];
-
-		HMAC_SHA1((PUCHAR) pMsg3, pMsg3->Body_Len[1] + 4, pAd->StaCfg.PTK, LEN_EAP_MICK, digest);
-		NdisMoveMemory(Mic, digest, LEN_KEY_DESC_MIC);
-	}
-	else	// TKIP
-	{
-		hmac_md5(pAd->StaCfg.PTK, LEN_EAP_MICK, (PUCHAR) pMsg3, pMsg3->Body_Len[1] + 4, Mic);
-	}
-
-	if(!NdisEqualMemory(OldMic, Mic, LEN_KEY_DESC_MIC))
-	{
-		DBGPRINT(RT_DEBUG_ERROR, (" MIC Different in msg 3 of 4-way handshake!!!!!!!!!! \n"));
-		return;
-	}
-	else
-		DBGPRINT(RT_DEBUG_TRACE, (" MIC VALID in msg 3 of 4-way handshake!!!!!!!!!! \n"));
-
-	// 3. Check Replay Counter, it has to be larger than last one. No need to be exact one larger
-	if(RTMPCompareMemory(pMsg3->KeyDesc.ReplayCounter, pAd->StaCfg.ReplayCounter, LEN_KEY_DESC_REPLAY) != 1)
-		return;
-
-	// Update new replay counter
-	NdisMoveMemory(pAd->StaCfg.ReplayCounter, pMsg3->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-
-	// 4. Double check ANonce
-	if(!NdisEqualMemory(pAd->StaCfg.ANonce, pMsg3->KeyDesc.KeyNonce, LEN_KEY_DESC_NONCE))
-		return;
-
-	// init 802.3 header and Fill Packet
-	MAKE_802_3_HEADER(Header802_3, pAd->CommonCfg.Bssid, pAd->CurrentAddress, EAPOL);
-
-	// Zero Message 4 body
-	NdisZeroMemory(&Packet, sizeof(Packet));
-	Packet.ProVer	= EAPOL_VER;
-	Packet.ProType	= EAPOLKey;
-	Packet.Body_Len[1]  = sizeof(KEY_DESCRIPTER) - MAX_LEN_OF_RSNIE;		// No data field
-
-	//
-	// Message 4 as  EAPOL-Key(0,1,0,0,0,P,0,0,MIC,0)
-	//
-	Packet.KeyDesc.Type = WPA1_KEY_DESC;
-
-	// Key descriptor version and appropriate RSN IE
-	Packet.KeyDesc.KeyInfo.KeyDescVer = peerKeyInfo.KeyDescVer;
-
-	// Update Key Length
-	Packet.KeyDesc.KeyLength[0] = pMsg3->KeyDesc.KeyLength[0];
-	Packet.KeyDesc.KeyLength[1] = pMsg3->KeyDesc.KeyLength[1];
-
-	// Key Type PeerKey
-	Packet.KeyDesc.KeyInfo.KeyType = PAIRWISEKEY;
-
-	// KeyMic field presented
-	Packet.KeyDesc.KeyInfo.KeyMic  = 1;
-
-	// In Msg3,  KeyInfo.secure =0 if Group Key HS to come. 1 if no group key HS
-	// Station sends Msg4  KeyInfo.secure should be the same as that in Msg.3
-	Packet.KeyDesc.KeyInfo.Secure= peerKeyInfo.Secure;
-
-	// Convert to little-endian format.
-	*((USHORT *)&Packet.KeyDesc.KeyInfo) = cpu2le16(*((USHORT *)&Packet.KeyDesc.KeyInfo));
-
-	// Key Replay count
-	NdisMoveMemory(Packet.KeyDesc.ReplayCounter, pMsg3->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-
-	// Out buffer for transmitting message 4
-	MlmeAllocateMemory(pAd, (PUCHAR *)&pOutBuffer);  // allocate memory
-	if(pOutBuffer == NULL)
-		return;
-
-	// Prepare EAPOL frame for MIC calculation
-	// Be careful, only EAPOL frame is counted for MIC calculation
-	MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-		Packet.Body_Len[1] + 4,    &Packet,
-		END_OF_ARGS);
-
-	// Prepare and Fill MIC value
-	NdisZeroMemory(Mic, sizeof(Mic));
-	if(pAd->StaCfg.WepStatus  == Ndis802_11Encryption3Enabled)
-	{
-		// AES
-		UCHAR digest[80];
-
-		HMAC_SHA1(pOutBuffer, FrameLen, pAd->StaCfg.PTK, LEN_EAP_MICK, digest);
-		NdisMoveMemory(Mic, digest, LEN_KEY_DESC_MIC);
-	}
-	else
-	{
-		hmac_md5(pAd->StaCfg.PTK, LEN_EAP_MICK, pOutBuffer, FrameLen, Mic);
-	}
-	NdisMoveMemory(Packet.KeyDesc.KeyMic, Mic, LEN_KEY_DESC_MIC);
-
-	// Update PTK
-	// Prepare pair-wise key information into shared key table
-	NdisZeroMemory(&pAd->SharedKey[BSS0][0], sizeof(CIPHER_KEY));
-	pAd->SharedKey[BSS0][0].KeyLen = LEN_TKIP_EK;
-    NdisMoveMemory(pAd->SharedKey[BSS0][0].Key, &pAd->StaCfg.PTK[32], LEN_TKIP_EK);
-	NdisMoveMemory(pAd->SharedKey[BSS0][0].RxMic, &pAd->StaCfg.PTK[48], LEN_TKIP_RXMICK);
-	NdisMoveMemory(pAd->SharedKey[BSS0][0].TxMic, &pAd->StaCfg.PTK[48+LEN_TKIP_RXMICK], LEN_TKIP_TXMICK);
-
-	// Decide its ChiperAlg
-	if (pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled)
-		pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_TKIP;
-	else if (pAd->StaCfg.PairCipher == Ndis802_11Encryption3Enabled)
-		pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_AES;
-	else
-		pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_NONE;
-
-	// Update these related information to MAC_TABLE_ENTRY
-	pEntry = &pAd->MacTab.Content[BSSID_WCID];
-	NdisMoveMemory(pEntry->PairwiseKey.Key, &pAd->StaCfg.PTK[32], LEN_TKIP_EK);
-	NdisMoveMemory(pEntry->PairwiseKey.RxMic, &pAd->StaCfg.PTK[48], LEN_TKIP_RXMICK);
-	NdisMoveMemory(pEntry->PairwiseKey.TxMic, &pAd->StaCfg.PTK[48+LEN_TKIP_RXMICK], LEN_TKIP_TXMICK);
-	pEntry->PairwiseKey.CipherAlg = pAd->SharedKey[BSS0][0].CipherAlg;
-
-	// Update pairwise key information to ASIC Shared Key Table
-	AsicAddSharedKeyEntry(pAd,
-						  BSS0,
-						  0,
-						  pAd->SharedKey[BSS0][0].CipherAlg,
-						  pAd->SharedKey[BSS0][0].Key,
-						  pAd->SharedKey[BSS0][0].TxMic,
-						  pAd->SharedKey[BSS0][0].RxMic);
-
-	// Update ASIC WCID attribute table and IVEIV table
-	RTMPAddWcidAttributeEntry(pAd,
-							  BSS0,
-							  0,
-							  pAd->SharedKey[BSS0][0].CipherAlg,
-							  pEntry);
-
-	// Make transmitting frame
-	MakeOutgoingFrame(pOutBuffer,           	&FrameLen,
-			  			LENGTH_802_3,     		&Header802_3,
-						Packet.Body_Len[1] + 4, &Packet,
-						END_OF_ARGS);
-
-
-	// Copy frame to Tx ring and Send Message 4 to authenticator
-	RTMPToWirelessSta(pAd, Header802_3, LENGTH_802_3, (PUCHAR)&Packet, Packet.Body_Len[1] + 4, TRUE);
-
-	MlmeFreeMemory(pAd, (PUCHAR)pOutBuffer);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("WpaPairMsg3Action <-----\n"));
-}
-
-VOID    Wpa2PairMsg3Action(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  MLME_QUEUE_ELEM *Elem)
-
-{
-	PHEADER_802_11      pHeader;
-	PUCHAR              pOutBuffer = NULL;
-	UCHAR               Header802_3[14];
-	ULONG               FrameLen = 0;
-	EAPOL_PACKET        Packet;
-	PEAPOL_PACKET       pMsg3;
-	UCHAR               Mic[16], OldMic[16];
-	UCHAR               *mpool, *KEYDATA, *digest;
-	UCHAR               Key[32];
-	MAC_TABLE_ENTRY 	*pEntry = NULL;
-	KEY_INFO			peerKeyInfo;
-
-	// allocate memory
-	os_alloc_mem(pAd, (PUCHAR *)&mpool, 1024);
-
-	if(mpool == NULL)
-		return;
-
-	// KEYDATA Len = 512.
-	KEYDATA = (UCHAR *) ROUND_UP(mpool, 4);
-	// digest Len = 80.
-	digest = (UCHAR *) ROUND_UP(KEYDATA + 512, 4);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Wpa2PairMsg3Action ----->\n"));
-
-	pHeader = (PHEADER_802_11) Elem->Msg;
-
-	// Process message 3 frame.
-	pMsg3 = (PEAPOL_PACKET)	&Elem->Msg[LENGTH_802_11 + LENGTH_802_1_H];
-
-	NdisZeroMemory((PUCHAR)&peerKeyInfo, sizeof(peerKeyInfo));
-	NdisMoveMemory((PUCHAR)&peerKeyInfo, (PUCHAR)&pMsg3->KeyDesc.KeyInfo, sizeof(KEY_INFO));
-
-	*((USHORT*)&peerKeyInfo) = cpu2le16(*((USHORT*)&peerKeyInfo));
-
-	// 1. Verify cipher type match
-	if (pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled && (peerKeyInfo.KeyDescVer!= 2))
-	{
-		os_free_mem(pAd, (PUCHAR)mpool);
-		return;
-	}
-	else if(pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled && (peerKeyInfo.KeyDescVer != 1))
-	{
-		os_free_mem(pAd, (PUCHAR)mpool);
-		return;
-	}
-
-	// 2. Check MIC value
-	// Save the MIC and replace with zero
-	NdisMoveMemory(OldMic, pMsg3->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
-	NdisZeroMemory(pMsg3->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
-	if (pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled)
-	{
-		// AES
-		HMAC_SHA1((PUCHAR) pMsg3, pMsg3->Body_Len[1] + 4, pAd->StaCfg.PTK, LEN_EAP_MICK, digest);
-		NdisMoveMemory(Mic, digest, LEN_KEY_DESC_MIC);
-	}
-	else
-	{
-		hmac_md5(pAd->StaCfg.PTK, LEN_EAP_MICK, (PUCHAR) pMsg3, pMsg3->Body_Len[1] + 4, Mic);
-	}
-
-	if(!NdisEqualMemory(OldMic, Mic, LEN_KEY_DESC_MIC))
-	{
-		DBGPRINT(RT_DEBUG_ERROR, (" MIC Different in msg 3 of 4-way handshake!!!!!!!!!! \n"));
-		os_free_mem(pAd, (PUCHAR)mpool);
-		return;
-	}
-	else
-		DBGPRINT(RT_DEBUG_TRACE, (" MIC VALID in msg 3 of 4-way handshake!!!!!!!!!! \n"));
-
-	// 3. Check Replay Counter, it has to be larger than last one. No need to be exact one larger
-	if(RTMPCompareMemory(pMsg3->KeyDesc.ReplayCounter, pAd->StaCfg.ReplayCounter, LEN_KEY_DESC_REPLAY) != 1)
-	{
-		os_free_mem(pAd, (PUCHAR)mpool);
-		return;
-	}
-
-	// Update new replay counter
-	NdisMoveMemory(pAd->StaCfg.ReplayCounter, pMsg3->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-
-	// 4. Double check ANonce
-	if(!NdisEqualMemory(pAd->StaCfg.ANonce, pMsg3->KeyDesc.KeyNonce, LEN_KEY_DESC_NONCE))
-	{
-		os_free_mem(pAd, (PUCHAR)mpool);
-		return;
-	}
-
-	// Obtain GTK
-	// 5. Decrypt GTK from Key Data
-	DBGPRINT_RAW(RT_DEBUG_TRACE, ("EKD = %d\n", peerKeyInfo.EKD_DL));
-	if(pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled)
-	{
-		// Decrypt AES GTK
-		AES_GTK_KEY_UNWRAP(&pAd->StaCfg.PTK[16], KEYDATA, pMsg3->KeyDesc.KeyDataLen[1],pMsg3->KeyDesc.KeyData);
-	}
-	else	  // TKIP
-	{
-		INT i;
-		// Decrypt TKIP GTK
-		// Construct 32 bytes RC4 Key
-		NdisMoveMemory(Key, pMsg3->KeyDesc.KeyIv, 16);
-		NdisMoveMemory(&Key[16], &pAd->StaCfg.PTK[16], 16);
-		ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, Key, 32);
-		//discard first 256 bytes
-		for(i = 0; i < 256; i++)
-			ARCFOUR_BYTE(&pAd->PrivateInfo.WEPCONTEXT);
-		// Decrypt GTK. Becareful, there is no ICV to check the result is correct or not
-		ARCFOUR_DECRYPT(&pAd->PrivateInfo.WEPCONTEXT, KEYDATA, pMsg3->KeyDesc.KeyData, pMsg3->KeyDesc.KeyDataLen[1]);
-	}
-
-	if (!ParseKeyData(pAd, KEYDATA, pMsg3->KeyDesc.KeyDataLen[1], 1))
-	{
-		os_free_mem(pAd, (PUCHAR)mpool);
-		return;
-	}
-
-	// Update GTK to ASIC
-	// Update group key information to ASIC Shared Key Table
-	AsicAddSharedKeyEntry(pAd,
-						  BSS0,
-						  pAd->StaCfg.DefaultKeyId,
-						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg,
-						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key,
-						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].TxMic,
-						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].RxMic);
-
-	// Update ASIC WCID attribute table and IVEIV table
-	RTMPAddWcidAttributeEntry(pAd,
-							  BSS0,
-							  pAd->StaCfg.DefaultKeyId,
-							  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg,
-							  NULL);
-
-	// init 802.3 header and Fill Packet
-	MAKE_802_3_HEADER(Header802_3, pAd->CommonCfg.Bssid, pAd->CurrentAddress, EAPOL);
-
-	// Zero message 4 body
-	NdisZeroMemory(&Packet, sizeof(Packet));
-	Packet.ProVer	= EAPOL_VER;
-	Packet.ProType	= EAPOLKey;
-	Packet.Body_Len[1]  	= sizeof(KEY_DESCRIPTER) - MAX_LEN_OF_RSNIE;		// No data field
-
-	//
-	// Message 4 as  EAPOL-Key(0,1,0,0,0,P,0,0,MIC,0)
-	//
-	Packet.KeyDesc.Type = WPA2_KEY_DESC;
-
-	// Key descriptor version and appropriate RSN IE
-	Packet.KeyDesc.KeyInfo.KeyDescVer = peerKeyInfo.KeyDescVer;
-
-	// Update Key Length
-	Packet.KeyDesc.KeyLength[0] = pMsg3->KeyDesc.KeyLength[0];
-	Packet.KeyDesc.KeyLength[1] = pMsg3->KeyDesc.KeyLength[1];
-
-	// Key Type PeerKey
-	Packet.KeyDesc.KeyInfo.KeyType = PAIRWISEKEY;
-
-	// KeyMic field presented
-	Packet.KeyDesc.KeyInfo.KeyMic  = 1;
-	Packet.KeyDesc.KeyInfo.Secure = 1;
-
-	// Convert to little-endian format.
-	*((USHORT *)&Packet.KeyDesc.KeyInfo) = cpu2le16(*((USHORT *)&Packet.KeyDesc.KeyInfo));
-
-	// Key Replay count
-	NdisMoveMemory(Packet.KeyDesc.ReplayCounter, pMsg3->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-
-	// Out buffer for transmitting message 4
-	MlmeAllocateMemory(pAd, (PUCHAR *)&pOutBuffer);  // allocate memory
-	if(pOutBuffer == NULL)
-	{
-		os_free_mem(pAd, (PUCHAR)mpool);
-		return;
-	}
-
-	// Prepare EAPOL frame for MIC calculation
-	// Be careful, only EAPOL frame is counted for MIC calculation
-	MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-		Packet.Body_Len[1] + 4,    &Packet,
-		END_OF_ARGS);
-
-	// Prepare and Fill MIC value
-	NdisZeroMemory(Mic, sizeof(Mic));
-	if(pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled)
-	{
-		// AES
-		HMAC_SHA1(pOutBuffer, FrameLen, pAd->StaCfg.PTK, LEN_EAP_MICK, digest);
-		NdisMoveMemory(Mic, digest, LEN_KEY_DESC_MIC);
-	}
-	else
-	{
-		hmac_md5(pAd->StaCfg.PTK, LEN_EAP_MICK, pOutBuffer, FrameLen, Mic);
-	}
-	NdisMoveMemory(Packet.KeyDesc.KeyMic, Mic, LEN_KEY_DESC_MIC);
-
-	// Update PTK
-	// Prepare pair-wise key information into shared key table
-	NdisZeroMemory(&pAd->SharedKey[BSS0][0], sizeof(CIPHER_KEY));
-	pAd->SharedKey[BSS0][0].KeyLen = LEN_TKIP_EK;
-    NdisMoveMemory(pAd->SharedKey[BSS0][0].Key, &pAd->StaCfg.PTK[32], LEN_TKIP_EK);
-	NdisMoveMemory(pAd->SharedKey[BSS0][0].RxMic, &pAd->StaCfg.PTK[48], LEN_TKIP_RXMICK);
-	NdisMoveMemory(pAd->SharedKey[BSS0][0].TxMic, &pAd->StaCfg.PTK[48+LEN_TKIP_RXMICK], LEN_TKIP_TXMICK);
-
-	// Decide its ChiperAlg
-	if (pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled)
-		pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_TKIP;
-	else if (pAd->StaCfg.PairCipher == Ndis802_11Encryption3Enabled)
-		pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_AES;
-	else
-		pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_NONE;
-
-	// Update these related information to MAC_TABLE_ENTRY
-	pEntry = &pAd->MacTab.Content[BSSID_WCID];
-	NdisMoveMemory(&pEntry->PairwiseKey.Key, &pAd->StaCfg.PTK[32], LEN_TKIP_EK);
-	NdisMoveMemory(&pEntry->PairwiseKey.RxMic, &pAd->StaCfg.PTK[48], LEN_TKIP_RXMICK);
-	NdisMoveMemory(&pEntry->PairwiseKey.TxMic, &pAd->StaCfg.PTK[48+LEN_TKIP_RXMICK], LEN_TKIP_TXMICK);
-	pEntry->PairwiseKey.CipherAlg = pAd->SharedKey[BSS0][0].CipherAlg;
-
-	// Update pairwise key information to ASIC Shared Key Table
-	AsicAddSharedKeyEntry(pAd,
-						  BSS0,
-						  0,
-						  pAd->SharedKey[BSS0][0].CipherAlg,
-						  pAd->SharedKey[BSS0][0].Key,
-						  pAd->SharedKey[BSS0][0].TxMic,
-						  pAd->SharedKey[BSS0][0].RxMic);
-
-	// Update ASIC WCID attribute table and IVEIV table
-	RTMPAddWcidAttributeEntry(pAd,
-							  BSS0,
-							  0,
-							  pAd->SharedKey[BSS0][0].CipherAlg,
-							  pEntry);
-
-	// Make  Transmitting frame
-	MakeOutgoingFrame(pOutBuffer,           	&FrameLen,
-			  			LENGTH_802_3,     		&Header802_3,
-						Packet.Body_Len[1] + 4, &Packet,
-						END_OF_ARGS);
-
-
-	// Copy frame to Tx ring and Send Message 4 to authenticator
-	RTMPToWirelessSta(pAd, Header802_3, LENGTH_802_3, (PUCHAR)&Packet, Packet.Body_Len[1] + 4, TRUE);
-
-	// set 802.1x port control
-	//pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-	STA_PORT_SECURED(pAd);
-
-    // Indicate Connected for GUI
-    pAd->IndicateMediaState = NdisMediaStateConnected;
-
-	MlmeFreeMemory(pAd, (PUCHAR)pOutBuffer);
-	os_free_mem(pAd, (PUCHAR)mpool);
-
-
-	// send wireless event - for set key done WPA2
-	if (pAd->CommonCfg.bWirelessEvent)
-		RTMPSendWirelessEvent(pAd, IW_SET_KEY_DONE_WPA2_EVENT_FLAG, pEntry->Addr, BSS0, 0);
-
-	DBGPRINT(RT_DEBUG_ERROR, ("Wpa2PairMsg3Action <-----\n"));
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Process Group key 2-way handshaking
-
-	Arguments:
-		pAd	Pointer	to our adapter
-		Elem		Message body
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	WpaGroupMsg1Action(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	MLME_QUEUE_ELEM	*Elem)
-
-{
-	PUCHAR              pOutBuffer = NULL;
-	UCHAR               Header802_3[14];
-	ULONG               FrameLen = 0;
-	EAPOL_PACKET        Packet;
-	PEAPOL_PACKET       pGroup;
-	UCHAR               *mpool, *digest, *KEYDATA;
-	UCHAR               Mic[16], OldMic[16];
-	UCHAR               GTK[32], Key[32];
-	KEY_INFO			peerKeyInfo;
-
-	// allocate memory
-	os_alloc_mem(pAd, (PUCHAR *)&mpool, 1024);
-
-	if(mpool == NULL)
-		return;
-
-	// digest Len = 80.
-	digest = (UCHAR *) ROUND_UP(mpool, 4);
-	// KEYDATA Len = 512.
-	KEYDATA = (UCHAR *) ROUND_UP(digest + 80, 4);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("WpaGroupMsg1Action ----->\n"));
-
-	// Process Group Message 1 frame. skip 802.11 header(24) & LLC_SNAP header(8)
-	pGroup = (PEAPOL_PACKET) &Elem->Msg[LENGTH_802_11 + LENGTH_802_1_H];
-
-	NdisZeroMemory((PUCHAR)&peerKeyInfo, sizeof(peerKeyInfo));
-	NdisMoveMemory((PUCHAR)&peerKeyInfo, (PUCHAR)&pGroup->KeyDesc.KeyInfo, sizeof(KEY_INFO));
-
-	*((USHORT*)&peerKeyInfo) = cpu2le16(*((USHORT*)&peerKeyInfo));
-
-	// 0. Check cipher type match
-	if (pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled && (peerKeyInfo.KeyDescVer != 2))
-	{
-		os_free_mem(pAd, (PUCHAR)mpool);
-		return;
-	}
-	else if (pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled && (peerKeyInfo.KeyDescVer != 1))
-	{
-		os_free_mem(pAd, (PUCHAR)mpool);
-		return;
-	}
-
-	// 1. Verify Replay counter
-	//    Check Replay Counter, it has to be larger than last one. No need to be exact one larger
-	if(RTMPCompareMemory(pGroup->KeyDesc.ReplayCounter, pAd->StaCfg.ReplayCounter, LEN_KEY_DESC_REPLAY) != 1)
-	{
-		os_free_mem(pAd, (PUCHAR)mpool);
-		return;
-	}
-
-	// Update new replay counter
-	NdisMoveMemory(pAd->StaCfg.ReplayCounter, pGroup->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-
-	// 2. Verify MIC is valid
-	// Save the MIC and replace with zero
-	NdisMoveMemory(OldMic, pGroup->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
-	NdisZeroMemory(pGroup->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
-
-	if(pAd->StaCfg.WepStatus  == Ndis802_11Encryption3Enabled)
-	{	// AES
-		HMAC_SHA1((PUCHAR) pGroup, pGroup->Body_Len[1] + 4, pAd->StaCfg.PTK, LEN_EAP_MICK, digest);
-		NdisMoveMemory(Mic, digest, LEN_KEY_DESC_MIC);
-	}
-	else
-	{	// TKIP
-		hmac_md5(pAd->StaCfg.PTK, LEN_EAP_MICK, (PUCHAR) pGroup, pGroup->Body_Len[1] + 4, Mic);
-	}
-
-	if(!NdisEqualMemory(OldMic, Mic, LEN_KEY_DESC_MIC))
-	{
-		DBGPRINT(RT_DEBUG_ERROR, (" MIC Different in group msg 1 of 2-way handshake!!!!!!!!!! \n"));
-		MlmeFreeMemory(pAd, (PUCHAR)mpool);
-		return;
-	}
-	else
-		DBGPRINT(RT_DEBUG_TRACE, (" MIC VALID in group msg 1 of 2-way handshake!!!!!!!!!! \n"));
-
-
-	// 3. Decrypt GTK from Key Data
-	if (pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled)
-	{
-		// Decrypt AES GTK
-		AES_GTK_KEY_UNWRAP(&pAd->StaCfg.PTK[16], KEYDATA,  pGroup->KeyDesc.KeyDataLen[1], pGroup->KeyDesc.KeyData);
-	}
-	else	// TKIP
-	{
-		INT i;
-
-		// Decrypt TKIP GTK
-		// Construct 32 bytes RC4 Key
-		NdisMoveMemory(Key, pGroup->KeyDesc.KeyIv, 16);
-		NdisMoveMemory(&Key[16], &pAd->StaCfg.PTK[16], 16);
-		ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, Key, 32);
-		//discard first 256 bytes
-		for(i = 0; i < 256; i++)
-			ARCFOUR_BYTE(&pAd->PrivateInfo.WEPCONTEXT);
-		// Decrypt GTK. Becareful, there is no ICV to check the result is correct or not
-		ARCFOUR_DECRYPT(&pAd->PrivateInfo.WEPCONTEXT, KEYDATA, pGroup->KeyDesc.KeyData, pGroup->KeyDesc.KeyDataLen[1]);
-	}
-
-	// Process decrypted key data material
-	// Parse keyData to handle KDE format for WPA2PSK
-	if (peerKeyInfo.EKD_DL)
-	{
-		if (!ParseKeyData(pAd, KEYDATA, pGroup->KeyDesc.KeyDataLen[1], 0))
-		{
-			os_free_mem(pAd, (PUCHAR)mpool);
-			return;
-		}
-	}
-	else	// WPAPSK
-	{
-		// set key material, TxMic and RxMic for WPAPSK
-		NdisMoveMemory(GTK, KEYDATA, 32);
-		NdisMoveMemory(pAd->StaCfg.GTK, GTK, 32);
-		pAd->StaCfg.DefaultKeyId = peerKeyInfo.KeyIndex;
-
-		// Prepare pair-wise key information into shared key table
-		NdisZeroMemory(&pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId], sizeof(CIPHER_KEY));
-		pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].KeyLen = LEN_TKIP_EK;
-		NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key, GTK, LEN_TKIP_EK);
-		NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].RxMic, &GTK[16], LEN_TKIP_RXMICK);
-		NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].TxMic, &GTK[24], LEN_TKIP_TXMICK);
-
-		// Update Shared Key CipherAlg
-		pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_NONE;
-		if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption2Enabled)
-			pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_TKIP;
-		else if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled)
-			pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_AES;
-
-    	//hex_dump("Group Key :", pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key, LEN_TKIP_EK);
-	}
-
-	// Update group key information to ASIC Shared Key Table
-	AsicAddSharedKeyEntry(pAd,
-						  BSS0,
-						  pAd->StaCfg.DefaultKeyId,
-						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg,
-						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key,
-						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].TxMic,
-						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].RxMic);
-
-	// Update ASIC WCID attribute table and IVEIV table
-	RTMPAddWcidAttributeEntry(pAd,
-							  BSS0,
-							  pAd->StaCfg.DefaultKeyId,
-							  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg,
-							  NULL);
-
-	// set 802.1x port control
-	//pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-	STA_PORT_SECURED(pAd);
-
-    // Indicate Connected for GUI
-    pAd->IndicateMediaState = NdisMediaStateConnected;
-
-	// init header and Fill Packet
-	MAKE_802_3_HEADER(Header802_3, pAd->CommonCfg.Bssid, pAd->CurrentAddress, EAPOL);
-
-	// Zero Group message 1 body
-	NdisZeroMemory(&Packet, sizeof(Packet));
-	Packet.ProVer	= EAPOL_VER;
-	Packet.ProType	= EAPOLKey;
-	Packet.Body_Len[1]  = sizeof(KEY_DESCRIPTER) - MAX_LEN_OF_RSNIE;		// No data field
-
-	//
-	// Group Message 2 as  EAPOL-Key(1,0,0,0,G,0,0,MIC,0)
-	//
-	if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)
-	{
-		Packet.KeyDesc.Type = WPA2_KEY_DESC;
-	}
-	else
-	{
-		Packet.KeyDesc.Type = WPA1_KEY_DESC;
-	}
-
-	// Key descriptor version and appropriate RSN IE
-	Packet.KeyDesc.KeyInfo.KeyDescVer = peerKeyInfo.KeyDescVer;
-
-	// Update Key Length
-	Packet.KeyDesc.KeyLength[0] = pGroup->KeyDesc.KeyLength[0];
-	Packet.KeyDesc.KeyLength[1] = pGroup->KeyDesc.KeyLength[1];
-
-	// Key Index as G-Msg 1
-	if(pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK)
-		Packet.KeyDesc.KeyInfo.KeyIndex = peerKeyInfo.KeyIndex;
-
-	// Key Type Group key
-	Packet.KeyDesc.KeyInfo.KeyType = GROUPKEY;
-
-	// KeyMic field presented
-	Packet.KeyDesc.KeyInfo.KeyMic  = 1;
-
-	// Secure bit
-	Packet.KeyDesc.KeyInfo.Secure  = 1;
-
-	// Convert to little-endian format.
-	*((USHORT *)&Packet.KeyDesc.KeyInfo) = cpu2le16(*((USHORT *)&Packet.KeyDesc.KeyInfo));
-
-	// Key Replay count
-	NdisMoveMemory(Packet.KeyDesc.ReplayCounter, pGroup->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-
-	// Out buffer for transmitting group message 2
-	MlmeAllocateMemory(pAd, (PUCHAR *)&pOutBuffer);  // allocate memory
-	if(pOutBuffer == NULL)
-	{
-		MlmeFreeMemory(pAd, (PUCHAR)mpool);
-		return;
-	}
-
-	// Prepare EAPOL frame for MIC calculation
-	// Be careful, only EAPOL frame is counted for MIC calculation
-	MakeOutgoingFrame(pOutBuffer,           &FrameLen,
-		Packet.Body_Len[1] + 4,    &Packet,
-		END_OF_ARGS);
-
-	// Prepare and Fill MIC value
-	NdisZeroMemory(Mic, sizeof(Mic));
-	if(pAd->StaCfg.WepStatus  == Ndis802_11Encryption3Enabled)
-	{
-		// AES
-		HMAC_SHA1(pOutBuffer, FrameLen, pAd->StaCfg.PTK, LEN_EAP_MICK, digest);
-		NdisMoveMemory(Mic, digest, LEN_KEY_DESC_MIC);
-	}
-	else
-	{
-		hmac_md5(pAd->StaCfg.PTK, LEN_EAP_MICK, pOutBuffer, FrameLen, Mic);
-	}
-	NdisMoveMemory(Packet.KeyDesc.KeyMic, Mic, LEN_KEY_DESC_MIC);
-
-
-	MakeOutgoingFrame(pOutBuffer,       		&FrameLen,
-						LENGTH_802_3,     		&Header802_3,
-						Packet.Body_Len[1] + 4, &Packet,
-						END_OF_ARGS);
-
-
-	// 5. Copy frame to Tx ring and prepare for encryption
-	RTMPToWirelessSta(pAd, Header802_3, LENGTH_802_3, (PUCHAR)&Packet, Packet.Body_Len[1] + 4, FALSE);
-
-	// 6 Free allocated memory
-	MlmeFreeMemory(pAd, (PUCHAR)pOutBuffer);
-	os_free_mem(pAd, (PUCHAR)mpool);
-
-	// send wireless event - for set key done WPA2
-	if (pAd->CommonCfg.bWirelessEvent)
-		RTMPSendWirelessEvent(pAd, IW_SET_KEY_DONE_WPA2_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("WpaGroupMsg1Action <-----\n"));
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Init WPA MAC header
-
-	Arguments:
-		pAd	Pointer	to our adapter
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	WpaMacHeaderInit(
-	IN		PRTMP_ADAPTER	pAd,
-	IN OUT	PHEADER_802_11	pHdr80211,
-	IN		UCHAR			wep,
-	IN		PUCHAR		    pAddr1)
-{
-	NdisZeroMemory(pHdr80211, sizeof(HEADER_802_11));
-	pHdr80211->FC.Type	= BTYPE_DATA;
-	pHdr80211->FC.ToDs	= 1;
-	if (wep	== 1)
-		pHdr80211->FC.Wep = 1;
-
-	 //	Addr1: BSSID, Addr2: SA, Addr3:	DA
-	COPY_MAC_ADDR(pHdr80211->Addr1, pAddr1);
-	COPY_MAC_ADDR(pHdr80211->Addr2, pAd->CurrentAddress);
-	COPY_MAC_ADDR(pHdr80211->Addr3, pAd->CommonCfg.Bssid);
-	pHdr80211->Sequence =	pAd->Sequence;
-}
-
-/*
-	========================================================================
-
-	Routine	Description:
-		Copy frame from waiting queue into relative ring buffer and set
-	appropriate ASIC register to kick hardware encryption before really
-	sent out to air.
-
-	Arguments:
-		pAd		Pointer	to our adapter
-		PNDIS_PACKET	Pointer to outgoing Ndis frame
-		NumberOfFrag	Number of fragment required
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID    RTMPToWirelessSta(
-	IN	PRTMP_ADAPTER	pAd,
-	IN  PUCHAR          pHeader802_3,
-    IN  UINT            HdrLen,
-	IN  PUCHAR          pData,
-    IN  UINT            DataLen,
-    IN	BOOLEAN			is4wayFrame)
-
-{
-	NDIS_STATUS     Status;
-	PNDIS_PACKET    pPacket;
-	UCHAR   Index;
-
-	do
-	{
-		// 1. build a NDIS packet and call RTMPSendPacket();
-		//    be careful about how/when to release this internal allocated NDIS PACKET buffer
-		Status = RTMPAllocateNdisPacket(pAd, &pPacket, pHeader802_3, HdrLen, pData, DataLen);
-		if (Status != NDIS_STATUS_SUCCESS)
-			break;
-
-		if (is4wayFrame)
-			RTMP_SET_PACKET_CLEAR_EAP_FRAME(pPacket, 1);
-		else
-			RTMP_SET_PACKET_CLEAR_EAP_FRAME(pPacket, 0);
-
-		// 2. send out the packet
-		Status = STASendPacket(pAd, pPacket);
-		if(Status == NDIS_STATUS_SUCCESS)
-		{
-			// Dequeue one frame from TxSwQueue0..3 queue and process it
-			// There are three place calling dequeue for TX ring.
-			// 1. Here, right after queueing the frame.
-			// 2. At the end of TxRingTxDone service routine.
-			// 3. Upon NDIS call RTMPSendPackets
-			if((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) &&
-				(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)))
-			{
-				for(Index = 0; Index < 5; Index ++)
-					if(pAd->TxSwQueue[Index].Number > 0)
-						RTMPDeQueuePacket(pAd, FALSE, Index, MAX_TX_PROCESS);
-			}
-		}
-	} while(FALSE);
-
-}
-
-/*
-    ========================================================================
-
-    Routine Description:
-    Check Sanity RSN IE form AP
-
-    Arguments:
-
-    Return Value:
-
-
-    ========================================================================
-*/
-BOOLEAN CheckRSNIE(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pData,
-	IN  UCHAR           DataLen,
-	OUT	UCHAR			*Offset)
-{
-	PUCHAR              pVIE;
-	UCHAR               len;
-	PEID_STRUCT         pEid;
-	BOOLEAN				result = FALSE;
-
-	pVIE = pData;
-	len	 = DataLen;
-	*Offset = 0;
-
-	while (len > sizeof(RSNIE2))
-	{
-		pEid = (PEID_STRUCT) pVIE;
-		// WPA RSN IE
-		if ((pEid->Eid == IE_WPA) && (NdisEqualMemory(pEid->Octet, WPA_OUI, 4)))
-		{
-			if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA || pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) &&
-				(NdisEqualMemory(pVIE, pAd->MacTab.Content[BSSID_WCID].RSN_IE, pAd->MacTab.Content[BSSID_WCID].RSNIE_Len)) &&
-				(pAd->MacTab.Content[BSSID_WCID].RSNIE_Len == (pEid->Len + 2)))
-			{
-					DBGPRINT(RT_DEBUG_TRACE, ("CheckRSNIE ==> WPA/WPAPSK RSN IE matched in Msg 3, Length(%d) \n", (pEid->Len + 2)));
-					result = TRUE;
-			}
-
-			*Offset += (pEid->Len + 2);
-		}
-		// WPA2 RSN IE
-		else if ((pEid->Eid == IE_RSN) && (NdisEqualMemory(pEid->Octet + 2, RSN_OUI, 3)))
-		{
-			if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2 || pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK) &&
-				(NdisEqualMemory(pVIE, pAd->MacTab.Content[BSSID_WCID].RSN_IE, pAd->MacTab.Content[BSSID_WCID].RSNIE_Len)) &&
-				(pAd->MacTab.Content[BSSID_WCID].RSNIE_Len == (pEid->Len + 2)))
-			{
-					DBGPRINT(RT_DEBUG_TRACE, ("CheckRSNIE ==> WPA2/WPA2PSK RSN IE matched in Msg 3, Length(%d) \n", (pEid->Len + 2)));
-					result = TRUE;
-			}
-
-			*Offset += (pEid->Len + 2);
-		}
-		else
-		{
-			break;
-		}
-
-		pVIE += (pEid->Len + 2);
-		len  -= (pEid->Len + 2);
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("CheckRSNIE ==> skip_offset(%d) \n", *Offset));
-
-	return result;
-
-}
-
-
-/*
-    ========================================================================
-
-    Routine Description:
-    Parse KEYDATA field.  KEYDATA[] May contain 2 RSN IE and optionally GTK.
-    GTK  is encaptulated in KDE format at  p.83 802.11i D10
-
-    Arguments:
-
-    Return Value:
-
-    Note:
-        802.11i D10
-
-    ========================================================================
-*/
-BOOLEAN ParseKeyData(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pKeyData,
-	IN  UCHAR           KeyDataLen,
-	IN	UCHAR			bPairewise)
-{
-    PKDE_ENCAP          pKDE = NULL;
-    PUCHAR              pMyKeyData = pKeyData;
-    UCHAR               KeyDataLength = KeyDataLen;
-    UCHAR               GTKLEN;
-	UCHAR				skip_offset;
-
-	// Verify The RSN IE contained in Pairewise-Msg 3 and skip it
-	if (bPairewise)
-    {
-		// Check RSN IE whether it is WPA2/WPA2PSK
-		if (!CheckRSNIE(pAd, pKeyData, KeyDataLen, &skip_offset))
-		{
-			DBGPRINT(RT_DEBUG_ERROR, ("ParseKeyData ==> WPA2/WPA2PSK RSN IE mismatched \n"));
-			hex_dump("Get KEYDATA :", pKeyData, KeyDataLen);
-			return FALSE;
-    	}
-    	else
-		{
-			// skip RSN IE
-			pMyKeyData += skip_offset;
-			KeyDataLength -= skip_offset;
-
-			//DBGPRINT(RT_DEBUG_TRACE, ("ParseKeyData ==> WPA2/WPA2PSK RSN IE matched in Msg 3, Length(%d) \n", skip_offset));
-		}
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE,("ParseKeyData ==> KeyDataLength %d without RSN_IE \n", KeyDataLength));
-
-	// Parse EKD format
-	if (KeyDataLength >= 8)
-    {
-        pKDE = (PKDE_ENCAP) pMyKeyData;
-    }
-	else
-    {
-		DBGPRINT(RT_DEBUG_ERROR, ("ERROR: KeyDataLength is too short \n"));
-        return FALSE;
-    }
-
-
-	// Sanity check - shared key index should not be 0
-	if (pKDE->GTKEncap.Kid == 0)
-    {
-        DBGPRINT(RT_DEBUG_ERROR, ("ERROR: GTK Key index zero \n"));
-        return FALSE;
-    }
-
-	// Sanity check - KED length
-	if (KeyDataLength < (pKDE->Len + 2))
-    {
-        DBGPRINT(RT_DEBUG_ERROR, ("ERROR: The len from KDE is too short \n"));
-        return FALSE;
-    }
-
-	// Get GTK length - refer to IEEE 802.11i-2004 p.82
-	GTKLEN = pKDE->Len -6;
-
-	if (GTKLEN < LEN_AES_KEY)
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("ERROR: GTK Key length is too short (%d) \n", GTKLEN));
-        return FALSE;
-	}
-	else
-		DBGPRINT(RT_DEBUG_TRACE, ("GTK Key with KDE formet got index=%d, len=%d \n", pKDE->GTKEncap.Kid, GTKLEN));
-
-	// Update GTK
-	// set key material, TxMic and RxMic for WPAPSK
-	NdisMoveMemory(pAd->StaCfg.GTK, pKDE->GTKEncap.GTK, 32);
-	pAd->StaCfg.DefaultKeyId = pKDE->GTKEncap.Kid;
-
-	// Update shared key table
-	NdisZeroMemory(&pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId], sizeof(CIPHER_KEY));
-	pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].KeyLen = LEN_TKIP_EK;
-	NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key, pKDE->GTKEncap.GTK, LEN_TKIP_EK);
-	NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].RxMic, &pKDE->GTKEncap.GTK[16], LEN_TKIP_RXMICK);
-	NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].TxMic, &pKDE->GTKEncap.GTK[24], LEN_TKIP_TXMICK);
-
-	// Update Shared Key CipherAlg
-	pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_NONE;
-	if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption2Enabled)
-		pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_TKIP;
-	else if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled)
-		pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_AES;
-
-	return TRUE;
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Cisco CCKM PRF function
-
-	Arguments:
-		key				Cisco Base Transient Key (BTK)
-		key_len			The key length of the BTK
-		data			Ruquest Number(RN) + BSSID
-		data_len		The length of the data
-		output			Store for PTK(Pairwise transient keys)
-		len				The length of the output
-	Return Value:
-		None
-
-	Note:
-		802.1i	Annex F.9
-
-	========================================================================
-*/
-VOID CCKMPRF(
-	IN	UCHAR	*key,
-	IN	INT		key_len,
-	IN	UCHAR	*data,
-	IN	INT		data_len,
-	OUT	UCHAR	*output,
-	IN	INT		len)
-{
-	INT		i;
-	UCHAR	input[1024];
-	INT		currentindex = 0;
-	INT		total_len;
-
-	NdisMoveMemory(input, data, data_len);
-	total_len = data_len;
-	input[total_len] = 0;
-	total_len++;
-	for	(i = 0;	i <	(len + 19) / 20; i++)
-	{
-		HMAC_SHA1(input, total_len,	key, key_len, &output[currentindex]);
-		currentindex +=	20;
-		input[total_len - 1]++;
-	}
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Process MIC error indication and record MIC error timer.
-
-	Arguments:
-		pAd 	Pointer to our adapter
-		pWpaKey 		Pointer to the WPA key structure
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-
-	========================================================================
-*/
-VOID	RTMPReportMicError(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PCIPHER_KEY 	pWpaKey)
-{
-	ULONG	Now;
-    UCHAR   unicastKey = (pWpaKey->Type == PAIRWISE_KEY ? 1:0);
-
-	// Record Last MIC error time and count
-	Now = jiffies;
-	if (pAd->StaCfg.MicErrCnt == 0)
-	{
-		pAd->StaCfg.MicErrCnt++;
-		pAd->StaCfg.LastMicErrorTime = Now;
-        NdisZeroMemory(pAd->StaCfg.ReplayCounter, 8);
-	}
-	else if (pAd->StaCfg.MicErrCnt == 1)
-	{
-		if ((pAd->StaCfg.LastMicErrorTime + (60 * OS_HZ)) < Now)
-		{
-			// Update Last MIC error time, this did not violate two MIC errors within 60 seconds
-			pAd->StaCfg.LastMicErrorTime = Now;
-		}
-		else
-		{
-
-			if (pAd->CommonCfg.bWirelessEvent)
-				RTMPSendWirelessEvent(pAd, IW_COUNTER_MEASURES_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-
-			pAd->StaCfg.LastMicErrorTime = Now;
-			// Violate MIC error counts, MIC countermeasures kicks in
-			pAd->StaCfg.MicErrCnt++;
-			// We shall block all reception
-			// We shall clean all Tx ring and disassoicate from AP after next EAPOL frame
-			//
-			// No necessary to clean all Tx ring, on RTMPHardTransmit will stop sending non-802.1X EAPOL packets
-			// if pAd->StaCfg.MicErrCnt greater than 2.
-			//
-			// RTMPRingCleanUp(pAd, QID_AC_BK);
-			// RTMPRingCleanUp(pAd, QID_AC_BE);
-			// RTMPRingCleanUp(pAd, QID_AC_VI);
-			// RTMPRingCleanUp(pAd, QID_AC_VO);
-			// RTMPRingCleanUp(pAd, QID_HCCA);
-		}
-	}
-	else
-	{
-		// MIC error count >= 2
-		// This should not happen
-		;
-	}
-    MlmeEnqueue(pAd,
-				MLME_CNTL_STATE_MACHINE,
-				OID_802_11_MIC_FAILURE_REPORT_FRAME,
-				1,
-				&unicastKey);
-
-    if (pAd->StaCfg.MicErrCnt == 2)
-    {
-        RTMPSetTimer(&pAd->StaCfg.WpaDisassocAndBlockAssocTimer, 100);
-    }
-}
-
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-#define	LENGTH_EAP_H    4
-// If the received frame is EAP-Packet ,find out its EAP-Code (Request(0x01), Response(0x02), Success(0x03), Failure(0x04)).
-INT	    WpaCheckEapCode(
-	IN  PRTMP_ADAPTER   		pAd,
-	IN  PUCHAR				pFrame,
-	IN  USHORT				FrameLen,
-	IN  USHORT				OffSet)
-{
-
-	PUCHAR	pData;
-	INT	result = 0;
-
-	if( FrameLen < OffSet + LENGTH_EAPOL_H + LENGTH_EAP_H )
-		return result;
-
-	pData = pFrame + OffSet; // skip offset bytes
-
-	if(*(pData+1) == EAPPacket) 	// 802.1x header - Packet Type
-	{
-		 result = *(pData+4);		// EAP header - Code
-	}
-
-	return result;
-}
-
-VOID    WpaSendMicFailureToWpaSupplicant(
-    IN  PRTMP_ADAPTER    pAd,
-    IN  BOOLEAN          bUnicast)
-{
-    union iwreq_data    wrqu;
-    char custom[IW_CUSTOM_MAX] = {0};
-
-    sprintf(custom, "MLME-MICHAELMICFAILURE.indication");
-    if (bUnicast)
-        sprintf(custom, "%s unicast", custom);
-    wrqu.data.length = strlen(custom);
-    wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, custom);
-
-    return;
-}
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-VOID	WpaMicFailureReportFrame(
-	IN  PRTMP_ADAPTER   pAd,
-	IN MLME_QUEUE_ELEM *Elem)
-{
-	PUCHAR              pOutBuffer = NULL;
-	UCHAR               Header802_3[14];
-	ULONG               FrameLen = 0;
-	EAPOL_PACKET        Packet;
-	UCHAR               Mic[16];
-    BOOLEAN             bUnicast;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("WpaMicFailureReportFrame ----->\n"));
-
-    bUnicast = (Elem->Msg[0] == 1 ? TRUE:FALSE);
-	pAd->Sequence = ((pAd->Sequence) + 1) & (MAX_SEQ_NUMBER);
-
-	// init 802.3 header and Fill Packet
-	MAKE_802_3_HEADER(Header802_3, pAd->CommonCfg.Bssid, pAd->CurrentAddress, EAPOL);
-
-	NdisZeroMemory(&Packet, sizeof(Packet));
-	Packet.ProVer	= EAPOL_VER;
-	Packet.ProType	= EAPOLKey;
-
-	Packet.KeyDesc.Type = WPA1_KEY_DESC;
-
-    // Request field presented
-    Packet.KeyDesc.KeyInfo.Request = 1;
-
-	if(pAd->StaCfg.WepStatus  == Ndis802_11Encryption3Enabled)
-	{
-		Packet.KeyDesc.KeyInfo.KeyDescVer = 2;
-	}
-	else	  // TKIP
-	{
-		Packet.KeyDesc.KeyInfo.KeyDescVer = 1;
-	}
-
-    Packet.KeyDesc.KeyInfo.KeyType = (bUnicast ? PAIRWISEKEY : GROUPKEY);
-
-	// KeyMic field presented
-	Packet.KeyDesc.KeyInfo.KeyMic  = 1;
-
-    // Error field presented
-	Packet.KeyDesc.KeyInfo.Error  = 1;
-
-	// Update packet length after decide Key data payload
-	Packet.Body_Len[1]  = sizeof(KEY_DESCRIPTER) - MAX_LEN_OF_RSNIE;
-
-	// Key Replay Count
-	NdisMoveMemory(Packet.KeyDesc.ReplayCounter, pAd->StaCfg.ReplayCounter, LEN_KEY_DESC_REPLAY);
-    inc_byte_array(pAd->StaCfg.ReplayCounter, 8);
-
-	// Convert to little-endian format.
-	*((USHORT *)&Packet.KeyDesc.KeyInfo) = cpu2le16(*((USHORT *)&Packet.KeyDesc.KeyInfo));
-
-
-	MlmeAllocateMemory(pAd, (PUCHAR *)&pOutBuffer);  // allocate memory
-	if(pOutBuffer == NULL)
-	{
-		return;
-	}
-
-	// Prepare EAPOL frame for MIC calculation
-	// Be careful, only EAPOL frame is counted for MIC calculation
-	MakeOutgoingFrame(pOutBuffer,               &FrameLen,
-		              Packet.Body_Len[1] + 4,   &Packet,
-		              END_OF_ARGS);
-
-	// Prepare and Fill MIC value
-	NdisZeroMemory(Mic, sizeof(Mic));
-	if(pAd->StaCfg.WepStatus  == Ndis802_11Encryption3Enabled)
-	{	// AES
-        UCHAR digest[20] = {0};
-		HMAC_SHA1(pOutBuffer, FrameLen, pAd->StaCfg.PTK, LEN_EAP_MICK, digest);
-		NdisMoveMemory(Mic, digest, LEN_KEY_DESC_MIC);
-	}
-	else
-	{	// TKIP
-		hmac_md5(pAd->StaCfg.PTK,  LEN_EAP_MICK, pOutBuffer, FrameLen, Mic);
-	}
-	NdisMoveMemory(Packet.KeyDesc.KeyMic, Mic, LEN_KEY_DESC_MIC);
-
-    MakeOutgoingFrame(pOutBuffer,           	&FrameLen,
-    	  			LENGTH_802_3,     			&Header802_3,
-    				Packet.Body_Len[1] + 4,     &Packet,
-    				END_OF_ARGS);
-
-	// opy frame to Tx ring and send MIC failure report frame to authenticator
-	RTMPToWirelessSta(pAd, Header802_3, LENGTH_802_3, (PUCHAR)&Packet, Packet.Body_Len[1] + 4, FALSE);
-
-	MlmeFreeMemory(pAd, (PUCHAR)pOutBuffer);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("WpaMicFailureReportFrame <-----\n"));
-}
-
-/** from wpa_supplicant
- * inc_byte_array - Increment arbitrary length byte array by one
- * @counter: Pointer to byte array
- * @len: Length of the counter in bytes
- *
- * This function increments the last byte of the counter by one and continues
- * rolling over to more significant bytes if the byte was incremented from
- * 0xff to 0x00.
- */
-void inc_byte_array(UCHAR *counter, int len)
-{
-	int pos = len - 1;
-	while (pos >= 0) {
-		counter[pos]++;
-		if (counter[pos] != 0)
-			break;
-		pos--;
-	}
-}
-
-VOID WpaDisassocApAndBlockAssoc(
-    IN PVOID SystemSpecific1,
-    IN PVOID FunctionContext,
-    IN PVOID SystemSpecific2,
-    IN PVOID SystemSpecific3)
-{
-    RTMP_ADAPTER                *pAd = (PRTMP_ADAPTER)FunctionContext;
-    MLME_DISASSOC_REQ_STRUCT    DisassocReq;
-
-	// disassoc from current AP first
-	DBGPRINT(RT_DEBUG_TRACE, ("RTMPReportMicError - disassociate with current AP after sending second continuous EAPOL frame\n"));
-	DisassocParmFill(pAd, &DisassocReq, pAd->CommonCfg.Bssid, REASON_MIC_FAILURE);
-	MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ, sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq);
-
-	pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_DISASSOC;
-	pAd->StaCfg.bBlockAssoc = TRUE;
-}
-
+#include "../../rt2870/sta/wpa.c"
diff --git a/drivers/staging/rt3070/sta_ioctl.c b/drivers/staging/rt3070/sta_ioctl.c
index 079454835a4..ac56507e3c8 100644
--- a/drivers/staging/rt3070/sta_ioctl.c
+++ b/drivers/staging/rt3070/sta_ioctl.c
@@ -1,7203 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-    Module Name:
-    sta_ioctl.c
-
-    Abstract:
-    IOCTL related subroutines
-
-    Revision History:
-    Who         When          What
-    --------    ----------    ----------------------------------------------
-    Rory Chen   01-03-2003    created
-	Rory Chen   02-14-2005    modify to support RT61
-*/
-
-#include	"rt_config.h"
-
-#ifdef DBG
-extern ULONG    RTDebugLevel;
-#endif
-
-#define NR_WEP_KEYS 				4
-#define WEP_SMALL_KEY_LEN 			(40/8)
-#define WEP_LARGE_KEY_LEN 			(104/8)
-
-#define GROUP_KEY_NO                4
-
-extern UCHAR    CipherWpa2Template[];
-extern UCHAR    CipherWpaPskTkip[];
-extern UCHAR    CipherWpaPskTkipLen;
-
-typedef struct PACKED _RT_VERSION_INFO{
-    UCHAR       DriverVersionW;
-    UCHAR       DriverVersionX;
-    UCHAR       DriverVersionY;
-    UCHAR       DriverVersionZ;
-    UINT        DriverBuildYear;
-    UINT        DriverBuildMonth;
-    UINT        DriverBuildDay;
-} RT_VERSION_INFO, *PRT_VERSION_INFO;
-
-struct iw_priv_args privtab[] = {
-{ RTPRIV_IOCTL_SET,
-  IW_PRIV_TYPE_CHAR | 1024, 0,
-  "set"},
-
-{ RTPRIV_IOCTL_SHOW, 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
-  ""},
-{ RTPRIV_IOCTL_SHOW, IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
-  ""},
-/* --- sub-ioctls definitions --- */
-    { SHOW_CONN_STATUS,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "connStatus" },
-	{ SHOW_DRVIER_VERION,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "driverVer" },
-    { SHOW_BA_INFO,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "bainfo" },
-	{ SHOW_DESC_INFO,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "descinfo" },
-    { RAIO_OFF,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "radio_off" },
-	{ RAIO_ON,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "radio_on" },
-#ifdef QOS_DLS_SUPPORT
-	{ SHOW_DLS_ENTRY_INFO,
-	  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "dlsentryinfo" },
-#endif // QOS_DLS_SUPPORT //
-	{ SHOW_CFG_VALUE,
-	  IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "show" },
-/* --- sub-ioctls relations --- */
-
-#ifdef DBG
-{ RTPRIV_IOCTL_BBP,
-  IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
-  "bbp"},
-{ RTPRIV_IOCTL_MAC,
-  IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | 1024,
-  "mac"},
-#ifdef RT30xx
-{ RTPRIV_IOCTL_RF,
-  IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
-  "rf"},
-#endif // RT30xx //
-{ RTPRIV_IOCTL_E2P,
-  IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | 1024,
-  "e2p"},
-#endif  /* DBG */
-
-{ RTPRIV_IOCTL_STATISTICS,
-  0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
-  "stat"},
-{ RTPRIV_IOCTL_GSITESURVEY,
-  0, IW_PRIV_TYPE_CHAR | 1024,
-  "get_site_survey"},
-
-
-};
-
-INT Set_SSID_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-#ifdef WMM_SUPPORT
-INT	Set_WmmCapable_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-#endif
-
-INT Set_NetworkType_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_AuthMode_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_EncrypType_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_DefaultKeyID_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_Key1_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_Key2_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_Key3_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_Key4_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-INT Set_WPAPSK_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-
-INT Set_PSMode_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-INT Set_Wpa_Support(
-    IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef DBG
-
-VOID RTMPIoctlMAC(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq);
-
-VOID RTMPIoctlE2PROM(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  struct iwreq    *wrq);
-
-#ifdef RT30xx
-VOID RTMPIoctlRF(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  struct iwreq    *wrq);
-#endif // RT30xx //
-#endif // DBG //
-
-
-NDIS_STATUS RTMPWPANoneAddKeyProc(
-    IN  PRTMP_ADAPTER   pAd,
-    IN	PVOID			pBuf);
-
-INT Set_FragTest_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-
-#ifdef DOT11_N_SUPPORT
-INT Set_TGnWifiTest_Proc(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          arg);
-#endif // DOT11_N_SUPPORT //
-
-INT Set_LongRetryLimit_Proc(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	PUCHAR			arg);
-
-INT Set_ShortRetryLimit_Proc(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	PUCHAR			arg);
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-INT Set_Ieee80211dClientMode_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-#endif // EXT_BUILD_CHANNEL_LIST //
-
-#ifdef CARRIER_DETECTION_SUPPORT
-INT Set_CarrierDetect_Proc(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          arg);
-#endif // CARRIER_DETECTION_SUPPORT //
-
-static struct {
-	CHAR *name;
-	INT (*set_proc)(PRTMP_ADAPTER pAdapter, PUCHAR arg);
-} *PRTMP_PRIVATE_SET_PROC, RTMP_PRIVATE_SUPPORT_PROC[] = {
-	{"DriverVersion",				Set_DriverVersion_Proc},
-	{"CountryRegion",				Set_CountryRegion_Proc},
-	{"CountryRegionABand",			Set_CountryRegionABand_Proc},
-	{"SSID",						Set_SSID_Proc},
-	{"WirelessMode",				Set_WirelessMode_Proc},
-	{"TxBurst",					Set_TxBurst_Proc},
-	{"TxPreamble",				Set_TxPreamble_Proc},
-	{"TxPower",					Set_TxPower_Proc},
-	{"Channel",					Set_Channel_Proc},
-	{"BGProtection",				Set_BGProtection_Proc},
-	{"RTSThreshold",				Set_RTSThreshold_Proc},
-	{"FragThreshold",				Set_FragThreshold_Proc},
-#ifdef DOT11_N_SUPPORT
-	{"HtBw",		                Set_HtBw_Proc},
-	{"HtMcs",		                Set_HtMcs_Proc},
-	{"HtGi",		                Set_HtGi_Proc},
-	{"HtOpMode",		            Set_HtOpMode_Proc},
-	{"HtExtcha",		            Set_HtExtcha_Proc},
-	{"HtMpduDensity",		        Set_HtMpduDensity_Proc},
-	{"HtBaWinSize",		        	Set_HtBaWinSize_Proc},
-	{"HtRdg",		        		Set_HtRdg_Proc},
-	{"HtAmsdu",		        		Set_HtAmsdu_Proc},
-	{"HtAutoBa",		        	Set_HtAutoBa_Proc},
-	{"HtBaDecline",					Set_BADecline_Proc},
-	{"HtProtect",		        	Set_HtProtect_Proc},
-	{"HtMimoPs",		        	Set_HtMimoPs_Proc},
-#endif // DOT11_N_SUPPORT //
-
-#ifdef AGGREGATION_SUPPORT
-	{"PktAggregate",				Set_PktAggregate_Proc},
-#endif
-
-#ifdef WMM_SUPPORT
-	{"WmmCapable",					Set_WmmCapable_Proc},
-#endif
-	{"IEEE80211H",					Set_IEEE80211H_Proc},
-    {"NetworkType",                 Set_NetworkType_Proc},
-	{"AuthMode",					Set_AuthMode_Proc},
-	{"EncrypType",					Set_EncrypType_Proc},
-	{"DefaultKeyID",				Set_DefaultKeyID_Proc},
-	{"Key1",						Set_Key1_Proc},
-	{"Key2",						Set_Key2_Proc},
-	{"Key3",						Set_Key3_Proc},
-	{"Key4",						Set_Key4_Proc},
-	{"WPAPSK",						Set_WPAPSK_Proc},
-	{"ResetCounter",				Set_ResetStatCounter_Proc},
-	{"PSMode",                      Set_PSMode_Proc},
-#ifdef DBG
-	{"Debug",						Set_Debug_Proc},
-#endif
-
-#ifdef RALINK_ATE
-	{"ATE",							Set_ATE_Proc},
-	{"ATEDA",						Set_ATE_DA_Proc},
-	{"ATESA",						Set_ATE_SA_Proc},
-	{"ATEBSSID",					Set_ATE_BSSID_Proc},
-	{"ATECHANNEL",					Set_ATE_CHANNEL_Proc},
-	{"ATETXPOW0",					Set_ATE_TX_POWER0_Proc},
-	{"ATETXPOW1",					Set_ATE_TX_POWER1_Proc},
-	{"ATETXANT",					Set_ATE_TX_Antenna_Proc},
-	{"ATERXANT",					Set_ATE_RX_Antenna_Proc},
-	{"ATETXFREQOFFSET",				Set_ATE_TX_FREQOFFSET_Proc},
-	{"ATETXBW",						Set_ATE_TX_BW_Proc},
-	{"ATETXLEN",					Set_ATE_TX_LENGTH_Proc},
-	{"ATETXCNT",					Set_ATE_TX_COUNT_Proc},
-	{"ATETXMCS",					Set_ATE_TX_MCS_Proc},
-	{"ATETXMODE",					Set_ATE_TX_MODE_Proc},
-	{"ATETXGI",						Set_ATE_TX_GI_Proc},
-	{"ATERXFER",					Set_ATE_RX_FER_Proc},
-	{"ATERRF",						Set_ATE_Read_RF_Proc},
-	{"ATEWRF1",						Set_ATE_Write_RF1_Proc},
-	{"ATEWRF2",						Set_ATE_Write_RF2_Proc},
-	{"ATEWRF3",						Set_ATE_Write_RF3_Proc},
-	{"ATEWRF4",						Set_ATE_Write_RF4_Proc},
-	{"ATELDE2P",				    Set_ATE_Load_E2P_Proc},
-	{"ATERE2P",						Set_ATE_Read_E2P_Proc},
-	{"ATESHOW",						Set_ATE_Show_Proc},
-	{"ATEHELP",						Set_ATE_Help_Proc},
-
-#ifdef RALINK_28xx_QA
-	{"TxStop",						Set_TxStop_Proc},
-	{"RxStop",						Set_RxStop_Proc},
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-    {"WpaSupport",                  Set_Wpa_Support},
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-
-
-	{"FixedTxMode",                 Set_FixedTxMode_Proc},
-#ifdef CONFIG_APSTA_MIXED_SUPPORT
-	{"OpMode",						Set_OpMode_Proc},
-#endif // CONFIG_APSTA_MIXED_SUPPORT //
-#ifdef DOT11_N_SUPPORT
-    {"TGnWifiTest",                 Set_TGnWifiTest_Proc},
-    {"ForceGF",		        		Set_ForceGF_Proc},
-#endif // DOT11_N_SUPPORT //
-#ifdef QOS_DLS_SUPPORT
-	{"DlsAddEntry",					Set_DlsAddEntry_Proc},
-	{"DlsTearDownEntry",			Set_DlsTearDownEntry_Proc},
-#endif // QOS_DLS_SUPPORT //
-	{"LongRetry",	        		Set_LongRetryLimit_Proc},
-	{"ShortRetry",	        		Set_ShortRetryLimit_Proc},
-#ifdef EXT_BUILD_CHANNEL_LIST
-	{"11dClientMode",				Set_Ieee80211dClientMode_Proc},
-#endif // EXT_BUILD_CHANNEL_LIST //
-#ifdef CARRIER_DETECTION_SUPPORT
-	{"CarrierDetect",				Set_CarrierDetect_Proc},
-#endif // CARRIER_DETECTION_SUPPORT //
-//2008/09/11:KH add to support efuse<--
-#ifdef RT30xx
-	{"efuseFreeNumber",				set_eFuseGetFreeBlockCount_Proc},
-	{"efuseDump",					set_eFusedump_Proc},
-	{"efuseLoadFromBin",				set_eFuseLoadFromBin_Proc},
-#endif // RT30xx //
-//2008/09/11:KH add to support efuse-->
-	{NULL,}
-};
-
-
-VOID RTMPAddKey(
-	IN	PRTMP_ADAPTER	    pAd,
-	IN	PNDIS_802_11_KEY    pKey)
-{
-	ULONG				KeyIdx;
-	MAC_TABLE_ENTRY  	*pEntry;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("RTMPAddKey ------>\n"));
-
-	if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-	{
-		if (pKey->KeyIndex & 0x80000000)
-		{
-		    if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
-            {
-                NdisZeroMemory(pAd->StaCfg.PMK, 32);
-                NdisMoveMemory(pAd->StaCfg.PMK, pKey->KeyMaterial, pKey->KeyLength);
-                goto end;
-            }
-		    // Update PTK
-		    NdisZeroMemory(&pAd->SharedKey[BSS0][0], sizeof(CIPHER_KEY));
-            pAd->SharedKey[BSS0][0].KeyLen = LEN_TKIP_EK;
-            NdisMoveMemory(pAd->SharedKey[BSS0][0].Key, pKey->KeyMaterial, LEN_TKIP_EK);
-#ifdef WPA_SUPPLICANT_SUPPORT
-            if (pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled)
-            {
-                NdisMoveMemory(pAd->SharedKey[BSS0][0].RxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK);
-                NdisMoveMemory(pAd->SharedKey[BSS0][0].TxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK);
-            }
-            else
-#endif // WPA_SUPPLICANT_SUPPORT //
-            {
-            	NdisMoveMemory(pAd->SharedKey[BSS0][0].TxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK);
-                NdisMoveMemory(pAd->SharedKey[BSS0][0].RxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK);
-            }
-
-            // Decide its ChiperAlg
-        	if (pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled)
-        		pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_TKIP;
-        	else if (pAd->StaCfg.PairCipher == Ndis802_11Encryption3Enabled)
-        		pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_AES;
-        	else
-        		pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_NONE;
-
-            // Update these related information to MAC_TABLE_ENTRY
-        	pEntry = &pAd->MacTab.Content[BSSID_WCID];
-            NdisMoveMemory(pEntry->PairwiseKey.Key, pAd->SharedKey[BSS0][0].Key, LEN_TKIP_EK);
-        	NdisMoveMemory(pEntry->PairwiseKey.RxMic, pAd->SharedKey[BSS0][0].RxMic, LEN_TKIP_RXMICK);
-        	NdisMoveMemory(pEntry->PairwiseKey.TxMic, pAd->SharedKey[BSS0][0].TxMic, LEN_TKIP_TXMICK);
-        	pEntry->PairwiseKey.CipherAlg = pAd->SharedKey[BSS0][0].CipherAlg;
-
-        	// Update pairwise key information to ASIC Shared Key Table
-        	AsicAddSharedKeyEntry(pAd,
-        						  BSS0,
-        						  0,
-        						  pAd->SharedKey[BSS0][0].CipherAlg,
-        						  pAd->SharedKey[BSS0][0].Key,
-        						  pAd->SharedKey[BSS0][0].TxMic,
-        						  pAd->SharedKey[BSS0][0].RxMic);
-
-        	// Update ASIC WCID attribute table and IVEIV table
-        	RTMPAddWcidAttributeEntry(pAd,
-        							  BSS0,
-        							  0,
-        							  pAd->SharedKey[BSS0][0].CipherAlg,
-        							  pEntry);
-
-            if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA2)
-            {
-                // set 802.1x port control
-	            //pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-				STA_PORT_SECURED(pAd);
-
-                // Indicate Connected for GUI
-                pAd->IndicateMediaState = NdisMediaStateConnected;
-            }
-		}
-        else
-        {
-            // Update GTK
-            pAd->StaCfg.DefaultKeyId = (pKey->KeyIndex & 0xFF);
-            NdisZeroMemory(&pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId], sizeof(CIPHER_KEY));
-            pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].KeyLen = LEN_TKIP_EK;
-            NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key, pKey->KeyMaterial, LEN_TKIP_EK);
-#ifdef WPA_SUPPLICANT_SUPPORT
-            if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption2Enabled)
-            {
-                NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].RxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK);
-                NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].TxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK);
-            }
-            else
-#endif // WPA_SUPPLICANT_SUPPORT //
-            {
-            	NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].TxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK);
-                NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].RxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK);
-            }
-
-            // Update Shared Key CipherAlg
-    		pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_NONE;
-    		if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption2Enabled)
-    			pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_TKIP;
-    		else if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled)
-    			pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_AES;
-
-            // Update group key information to ASIC Shared Key Table
-        	AsicAddSharedKeyEntry(pAd,
-        						  BSS0,
-        						  pAd->StaCfg.DefaultKeyId,
-        						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg,
-        						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key,
-        						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].TxMic,
-        						  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].RxMic);
-
-        	// Update ASIC WCID attribute table and IVEIV table
-        	RTMPAddWcidAttributeEntry(pAd,
-        							  BSS0,
-        							  pAd->StaCfg.DefaultKeyId,
-        							  pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg,
-        							  NULL);
-
-            // set 802.1x port control
-	        //pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-			STA_PORT_SECURED(pAd);
-
-            // Indicate Connected for GUI
-            pAd->IndicateMediaState = NdisMediaStateConnected;
-        }
-	}
-	else	// dynamic WEP from wpa_supplicant
-	{
-		UCHAR	CipherAlg;
-    	PUCHAR	Key;
-
-		if(pKey->KeyLength == 32)
-			goto end;
-
-		KeyIdx = pKey->KeyIndex & 0x0fffffff;
-
-		if (KeyIdx < 4)
-		{
-			// it is a default shared key, for Pairwise key setting
-			if (pKey->KeyIndex & 0x80000000)
-			{
-				pEntry = MacTableLookup(pAd, pKey->BSSID);
-
-				if (pEntry)
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("RTMPAddKey: Set Pair-wise Key\n"));
-
-					// set key material and key length
- 					pEntry->PairwiseKey.KeyLen = (UCHAR)pKey->KeyLength;
-					NdisMoveMemory(pEntry->PairwiseKey.Key, &pKey->KeyMaterial, pKey->KeyLength);
-
-					// set Cipher type
-					if (pKey->KeyLength == 5)
-						pEntry->PairwiseKey.CipherAlg = CIPHER_WEP64;
-					else
-						pEntry->PairwiseKey.CipherAlg = CIPHER_WEP128;
-
-					// Add Pair-wise key to Asic
-					AsicAddPairwiseKeyEntry(
-						pAd,
-						pEntry->Addr,
-						(UCHAR)pEntry->Aid,
-                		&pEntry->PairwiseKey);
-
-					// update WCID attribute table and IVEIV table for this entry
-					RTMPAddWcidAttributeEntry(
-						pAd,
-						BSS0,
-						KeyIdx, // The value may be not zero
-						pEntry->PairwiseKey.CipherAlg,
-						pEntry);
-
-				}
-			}
-			else
-            {
-				// Default key for tx (shared key)
-				pAd->StaCfg.DefaultKeyId = (UCHAR) KeyIdx;
-
-				// set key material and key length
-				pAd->SharedKey[BSS0][KeyIdx].KeyLen = (UCHAR) pKey->KeyLength;
-				NdisMoveMemory(pAd->SharedKey[BSS0][KeyIdx].Key, &pKey->KeyMaterial, pKey->KeyLength);
-
-				// Set Ciper type
-				if (pKey->KeyLength == 5)
-					pAd->SharedKey[BSS0][KeyIdx].CipherAlg = CIPHER_WEP64;
-				else
-					pAd->SharedKey[BSS0][KeyIdx].CipherAlg = CIPHER_WEP128;
-
-    			CipherAlg = pAd->SharedKey[BSS0][KeyIdx].CipherAlg;
-    			Key = pAd->SharedKey[BSS0][KeyIdx].Key;
-
-				// Set Group key material to Asic
-    			AsicAddSharedKeyEntry(pAd, BSS0, KeyIdx, CipherAlg, Key, NULL, NULL);
-
-				// Update WCID attribute table and IVEIV table for this group key table
-				RTMPAddWcidAttributeEntry(pAd, BSS0, KeyIdx, CipherAlg, NULL);
-
-			}
-		}
-	}
-end:
-	return;
-}
-
-char * rtstrchr(const char * s, int c)
-{
-    for(; *s != (char) c; ++s)
-        if (*s == '\0')
-            return NULL;
-    return (char *) s;
-}
-
-/*
-This is required for LinEX2004/kernel2.6.7 to provide iwlist scanning function
-*/
-
-int
-rt_ioctl_giwname(struct net_device *dev,
-		   struct iw_request_info *info,
-		   char *name, char *extra)
-{
-//	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
-#ifdef RT2870
-	strncpy(name, "RT2870 Wireless", IFNAMSIZ);
-#endif // RT2870 //
-	return 0;
-}
-
-int rt_ioctl_siwfreq(struct net_device *dev,
-			struct iw_request_info *info,
-			struct iw_freq *freq, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-	int 	chan = -1;
-
-    //check if the interface is down
-    if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-        return -ENETDOWN;
-    }
-
-
-	if (freq->e > 1)
-		return -EINVAL;
-
-	if((freq->e == 0) && (freq->m <= 1000))
-		chan = freq->m;	// Setting by channel number
-	else
-		MAP_KHZ_TO_CHANNEL_ID( (freq->m /100) , chan); // Setting by frequency - search the table , like 2.412G, 2.422G,
-
-    if (ChannelSanity(pAdapter, chan) == TRUE)
-    {
-	pAdapter->CommonCfg.Channel = chan;
-	DBGPRINT(RT_DEBUG_ERROR, ("==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x%x] (Channel=%d)\n", SIOCSIWFREQ, pAdapter->CommonCfg.Channel));
-    }
-    else
-        return -EINVAL;
-
-	return 0;
-}
-int rt_ioctl_giwfreq(struct net_device *dev,
-		   struct iw_request_info *info,
-		   struct iw_freq *freq, char *extra)
-{
-    VIRTUAL_ADAPTER *pVirtualAd = NULL;
-	PRTMP_ADAPTER pAdapter;
-	UCHAR ch;
-	ULONG	m;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->ml_priv;
-	}
-	else
-	{
-		pVirtualAd = dev->ml_priv;
-		pAdapter = pVirtualAd->RtmpDev->ml_priv;
-	}
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->ml_priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-		ch = pAdapter->CommonCfg.Channel;
-
-	DBGPRINT(RT_DEBUG_TRACE,("==>rt_ioctl_giwfreq  %d\n", ch));
-
-    MAP_CHANNEL_ID_TO_KHZ(ch, m);
-	freq->m = m * 100;
-	freq->e = 1;
-	return 0;
-}
-
-int rt_ioctl_siwmode(struct net_device *dev,
-		   struct iw_request_info *info,
-		   __u32 *mode, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
-	//check if the interface is down
-    if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-    	DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-       	return -ENETDOWN;
-    }
-
-	switch (*mode)
-	{
-		case IW_MODE_ADHOC:
-			Set_NetworkType_Proc(pAdapter, "Adhoc");
-			break;
-		case IW_MODE_INFRA:
-			Set_NetworkType_Proc(pAdapter, "Infra");
-			break;
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,4,20))
-        case IW_MODE_MONITOR:
-			Set_NetworkType_Proc(pAdapter, "Monitor");
-			break;
-#endif
-		default:
-			DBGPRINT(RT_DEBUG_TRACE, ("===>rt_ioctl_siwmode::SIOCSIWMODE (unknown %d)\n", *mode));
-			return -EINVAL;
-	}
-
-	// Reset Ralink supplicant to not use, it will be set to start when UI set PMK key
-	pAdapter->StaCfg.WpaState = SS_NOTUSE;
-
-	return 0;
-}
-
-int rt_ioctl_giwmode(struct net_device *dev,
-		   struct iw_request_info *info,
-		   __u32 *mode, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
-	if (ADHOC_ON(pAdapter))
-		*mode = IW_MODE_ADHOC;
-    else if (INFRA_ON(pAdapter))
-		*mode = IW_MODE_INFRA;
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,4,20))
-    else if (MONITOR_ON(pAdapter))
-    {
-        *mode = IW_MODE_MONITOR;
-    }
-#endif
-    else
-        *mode = IW_MODE_AUTO;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("==>rt_ioctl_giwmode(mode=%d)\n", *mode));
-	return 0;
-}
-
-int rt_ioctl_siwsens(struct net_device *dev,
-		   struct iw_request_info *info,
-		   char *name, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
-	//check if the interface is down
-    	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    	{
-        	DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-        	return -ENETDOWN;
-    	}
-
-	return 0;
-}
-
-int rt_ioctl_giwsens(struct net_device *dev,
-		   struct iw_request_info *info,
-		   char *name, char *extra)
-{
-	return 0;
-}
-
-int rt_ioctl_giwrange(struct net_device *dev,
-		   struct iw_request_info *info,
-		   struct iw_point *data, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
-	struct iw_range *range = (struct iw_range *) extra;
-	u16 val;
-	int i;
-
-	DBGPRINT(RT_DEBUG_TRACE ,("===>rt_ioctl_giwrange\n"));
-	data->length = sizeof(struct iw_range);
-	memset(range, 0, sizeof(struct iw_range));
-
-	range->txpower_capa = IW_TXPOW_DBM;
-
-	if (INFRA_ON(pAdapter)||ADHOC_ON(pAdapter))
-	{
-		range->min_pmp = 1 * 1024;
-		range->max_pmp = 65535 * 1024;
-		range->min_pmt = 1 * 1024;
-		range->max_pmt = 1000 * 1024;
-		range->pmp_flags = IW_POWER_PERIOD;
-		range->pmt_flags = IW_POWER_TIMEOUT;
-		range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT |
-			IW_POWER_UNICAST_R | IW_POWER_ALL_R;
-	}
-
-	range->we_version_compiled = WIRELESS_EXT;
-	range->we_version_source = 14;
-
-	range->retry_capa = IW_RETRY_LIMIT;
-	range->retry_flags = IW_RETRY_LIMIT;
-	range->min_retry = 0;
-	range->max_retry = 255;
-
-	range->num_channels =  pAdapter->ChannelListNum;
-
-	val = 0;
-	for (i = 1; i <= range->num_channels; i++)
-	{
-		u32 m;
-		range->freq[val].i = pAdapter->ChannelList[i-1].Channel;
-		MAP_CHANNEL_ID_TO_KHZ(pAdapter->ChannelList[i-1].Channel, m);
-		range->freq[val].m = m * 100; /* HZ */
-
-		range->freq[val].e = 1;
-		val++;
-		if (val == IW_MAX_FREQUENCIES)
-			break;
-	}
-	range->num_frequency = val;
-
-	range->max_qual.qual = 100; /* what is correct max? This was not
-					* documented exactly. At least
-					* 69 has been observed. */
-	range->max_qual.level = 0; /* dB */
-	range->max_qual.noise = 0; /* dB */
-
-	/* What would be suitable values for "average/typical" qual? */
-	range->avg_qual.qual = 20;
-	range->avg_qual.level = -60;
-	range->avg_qual.noise = -95;
-	range->sensitivity = 3;
-
-	range->max_encoding_tokens = NR_WEP_KEYS;
-	range->num_encoding_sizes = 2;
-	range->encoding_size[0] = 5;
-	range->encoding_size[1] = 13;
-
-	range->min_rts = 0;
-	range->max_rts = 2347;
-	range->min_frag = 256;
-	range->max_frag = 2346;
-
-#if WIRELESS_EXT > 17
-	/* IW_ENC_CAPA_* bit field */
-	range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 |
-					IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP;
-#endif
-
-	return 0;
-}
-
-int rt_ioctl_siwap(struct net_device *dev,
-		      struct iw_request_info *info,
-		      struct sockaddr *ap_addr, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-    NDIS_802_11_MAC_ADDRESS Bssid;
-
-	//check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-       	DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-       	return -ENETDOWN;
-    }
-
-	if (pAdapter->Mlme.CntlMachine.CurrState != CNTL_IDLE)
-    {
-        RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-        DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
-    }
-
-    // tell CNTL state machine to call NdisMSetInformationComplete() after completing
-    // this request, because this request is initiated by NDIS.
-    pAdapter->MlmeAux.CurrReqIsFromNdis = FALSE;
-	// Prevent to connect AP again in STAMlmePeriodicExec
-	pAdapter->MlmeAux.AutoReconnectSsidLen= 32;
-
-    memset(Bssid, 0, MAC_ADDR_LEN);
-    memcpy(Bssid, ap_addr->sa_data, MAC_ADDR_LEN);
-    MlmeEnqueue(pAdapter,
-                MLME_CNTL_STATE_MACHINE,
-                OID_802_11_BSSID,
-                sizeof(NDIS_802_11_MAC_ADDRESS),
-                (VOID *)&Bssid);
-
-    DBGPRINT(RT_DEBUG_TRACE, ("IOCTL::SIOCSIWAP %02x:%02x:%02x:%02x:%02x:%02x\n",
-        Bssid[0], Bssid[1], Bssid[2], Bssid[3], Bssid[4], Bssid[5]));
-
-	return 0;
-}
-
-int rt_ioctl_giwap(struct net_device *dev,
-		      struct iw_request_info *info,
-		      struct sockaddr *ap_addr, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
-	if (INFRA_ON(pAdapter) || ADHOC_ON(pAdapter))
-	{
-		ap_addr->sa_family = ARPHRD_ETHER;
-		memcpy(ap_addr->sa_data, &pAdapter->CommonCfg.Bssid, ETH_ALEN);
-	}
-#ifdef WPA_SUPPLICANT_SUPPORT
-    // Add for RT2870
-    else if (pAdapter->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
-    {
-        ap_addr->sa_family = ARPHRD_ETHER;
-        memcpy(ap_addr->sa_data, &pAdapter->MlmeAux.Bssid, ETH_ALEN);
-    }
-#endif // WPA_SUPPLICANT_SUPPORT //
-	else
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("IOCTL::SIOCGIWAP(=EMPTY)\n"));
-		return -ENOTCONN;
-	}
-
-	return 0;
-}
-
-/*
- * Units are in db above the noise floor. That means the
- * rssi values reported in the tx/rx descriptors in the
- * driver are the SNR expressed in db.
- *
- * If you assume that the noise floor is -95, which is an
- * excellent assumption 99.5 % of the time, then you can
- * derive the absolute signal level (i.e. -95 + rssi).
- * There are some other slight factors to take into account
- * depending on whether the rssi measurement is from 11b,
- * 11g, or 11a.   These differences are at most 2db and
- * can be documented.
- *
- * NB: various calculations are based on the orinoco/wavelan
- *     drivers for compatibility
- */
-static void set_quality(PRTMP_ADAPTER pAdapter,
-                        struct iw_quality *iq,
-                        signed char rssi)
-{
-	__u8 ChannelQuality;
-
-	// Normalize Rssi
-	if (rssi >= -50)
-		ChannelQuality = 100;
-	else if (rssi >= -80) // between -50 ~ -80dbm
-		ChannelQuality = (__u8)(24 + ((rssi + 80) * 26)/10);
-	else if (rssi >= -90)   // between -80 ~ -90dbm
-        ChannelQuality = (__u8)((rssi + 90) * 26)/10;
-	else
-		ChannelQuality = 0;
-
-    iq->qual = (__u8)ChannelQuality;
-
-    iq->level = (__u8)(rssi);
-    iq->noise = (pAdapter->BbpWriteLatch[66] > pAdapter->BbpTuning.FalseCcaUpperThreshold) ? ((__u8)pAdapter->BbpTuning.FalseCcaUpperThreshold) : ((__u8) pAdapter->BbpWriteLatch[66]); 	// noise level (dBm)
-    iq->noise += 256 - 143;
-    iq->updated = pAdapter->iw_stats.qual.updated;
-}
-
-int rt_ioctl_iwaplist(struct net_device *dev,
-			struct iw_request_info *info,
-			struct iw_point *data, char *extra)
-{
- 	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
-	struct sockaddr addr[IW_MAX_AP];
-	struct iw_quality qual[IW_MAX_AP];
-	int i;
-
-   	//check if the interface is down
-    if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-       	DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-		data->length = 0;
-		return 0;
-        //return -ENETDOWN;
-	}
-
-	for (i = 0; i <IW_MAX_AP ; i++)
-	{
-		if (i >=  pAdapter->ScanTab.BssNr)
-			break;
-		addr[i].sa_family = ARPHRD_ETHER;
-			memcpy(addr[i].sa_data, &pAdapter->ScanTab.BssEntry[i].Bssid, MAC_ADDR_LEN);
-		set_quality(pAdapter, &qual[i], pAdapter->ScanTab.BssEntry[i].Rssi);
-	}
-	data->length = i;
-	memcpy(extra, &addr, i*sizeof(addr[0]));
-	data->flags = 1;		/* signal quality present (sort of) */
-	memcpy(extra + i*sizeof(addr[0]), &qual, i*sizeof(qual[i]));
-
-	return 0;
-}
-
-#ifdef SIOCGIWSCAN
-int rt_ioctl_siwscan(struct net_device *dev,
-			struct iw_request_info *info,
-			struct iw_point *data, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
-	ULONG								Now;
-	int Status = NDIS_STATUS_SUCCESS;
-
-	//check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-		return -ENETDOWN;
-	}
-
-	if (MONITOR_ON(pAdapter))
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("!!! Driver is in Monitor Mode now !!!\n"));
-        return -EINVAL;
-    }
-
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-	if (pAdapter->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE)
-	{
-		pAdapter->StaCfg.WpaSupplicantScanCount++;
-	}
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-    pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE;
-	if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-		return 0;
-	do{
-		Now = jiffies;
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-		if ((pAdapter->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE) &&
-			(pAdapter->StaCfg.WpaSupplicantScanCount > 3))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("!!! WpaSupplicantScanCount > 3\n"));
-			Status = NDIS_STATUS_SUCCESS;
-			break;
-		}
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-		if ((OPSTATUS_TEST_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED)) &&
-			((pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA) ||
-			(pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK)) &&
-			(pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("!!! Link UP, Port Not Secured! ignore this set::OID_802_11_BSSID_LIST_SCAN\n"));
-			Status = NDIS_STATUS_SUCCESS;
-			break;
-		}
-
-		if (pAdapter->Mlme.CntlMachine.CurrState != CNTL_IDLE)
-		{
-			RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-			DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
-		}
-
-		// tell CNTL state machine to call NdisMSetInformationComplete() after completing
-		// this request, because this request is initiated by NDIS.
-		pAdapter->MlmeAux.CurrReqIsFromNdis = FALSE;
-		// Reset allowed scan retries
-		pAdapter->StaCfg.ScanCnt = 0;
-		pAdapter->StaCfg.LastScanTime = Now;
-
-		MlmeEnqueue(pAdapter,
-			MLME_CNTL_STATE_MACHINE,
-			OID_802_11_BSSID_LIST_SCAN,
-			0,
-			NULL);
-
-		Status = NDIS_STATUS_SUCCESS;
-		RT28XX_MLME_HANDLER(pAdapter);
-	}while(0);
-	return 0;
-}
-
-int rt_ioctl_giwscan(struct net_device *dev,
-			struct iw_request_info *info,
-			struct iw_point *data, char *extra)
-{
-
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-	int i=0;
-	char *current_ev = extra, *previous_ev = extra;
-	char *end_buf;
-	char *current_val, custom[MAX_CUSTOM_LEN] = {0};
-#ifndef IWEVGENIE
-	char idx;
-#endif // IWEVGENIE //
-	struct iw_event iwe;
-
-	if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-    {
-		/*
-		 * Still scanning, indicate the caller should try again.
-		 */
-		return -EAGAIN;
-	}
-
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-	if (pAdapter->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE)
-	{
-		pAdapter->StaCfg.WpaSupplicantScanCount = 0;
-	}
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-	if (pAdapter->ScanTab.BssNr == 0)
-	{
-		data->length = 0;
-		return 0;
-	}
-
-#if WIRELESS_EXT >= 17
-    if (data->length > 0)
-        end_buf = extra + data->length;
-    else
-        end_buf = extra + IW_SCAN_MAX_DATA;
-#else
-    end_buf = extra + IW_SCAN_MAX_DATA;
-#endif
-
-	for (i = 0; i < pAdapter->ScanTab.BssNr; i++)
-	{
-		if (current_ev >= end_buf)
-        {
-#if WIRELESS_EXT >= 17
-            return -E2BIG;
-#else
-			break;
-#endif
-        }
-
-		//MAC address
-		//================================
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = SIOCGIWAP;
-		iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
-				memcpy(iwe.u.ap_addr.sa_data, &pAdapter->ScanTab.BssEntry[i].Bssid, ETH_ALEN);
-
-        previous_ev = current_ev;
-			current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_ADDR_LEN);
-        if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-            return -E2BIG;
-#else
-			break;
-#endif
-
-		/*
-		Protocol:
-			it will show scanned AP's WirelessMode .
-			it might be
-					802.11a
-					802.11a/n
-					802.11g/n
-					802.11b/g/n
-					802.11g
-					802.11b/g
-		*/
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = SIOCGIWNAME;
-
-
-	{
-		PBSS_ENTRY pBssEntry=&pAdapter->ScanTab.BssEntry[i];
-		BOOLEAN isGonly=FALSE;
-		int rateCnt=0;
-
-		if (pBssEntry->Channel>14)
-		{
-			if (pBssEntry->HtCapabilityLen!=0)
-				strcpy(iwe.u.name,"802.11a/n");
-			else
-				strcpy(iwe.u.name,"802.11a");
-		}
-		else
-		{
-			/*
-				if one of non B mode rate is set supported rate . it mean G only.
-			*/
-			for (rateCnt=0;rateCnt<pBssEntry->SupRateLen;rateCnt++)
-			{
-				/*
-					6Mbps(140) 9Mbps(146) and >=12Mbps(152) are supported rate , it mean G only.
-				*/
-				if (pBssEntry->SupRate[rateCnt]==140 || pBssEntry->SupRate[rateCnt]==146 || pBssEntry->SupRate[rateCnt]>=152)
-					isGonly=TRUE;
-			}
-
-			for (rateCnt=0;rateCnt<pBssEntry->ExtRateLen;rateCnt++)
-			{
-				if (pBssEntry->ExtRate[rateCnt]==140 || pBssEntry->ExtRate[rateCnt]==146 || pBssEntry->ExtRate[rateCnt]>=152)
-					isGonly=TRUE;
-			}
-
-
-			if (pBssEntry->HtCapabilityLen!=0)
-			{
-				if (isGonly==TRUE)
-					strcpy(iwe.u.name,"802.11g/n");
-				else
-					strcpy(iwe.u.name,"802.11b/g/n");
-			}
-			else
-			{
-				if (isGonly==TRUE)
-					strcpy(iwe.u.name,"802.11g");
-				else
-				{
-					if (pBssEntry->SupRateLen==4 && pBssEntry->ExtRateLen==0)
-						strcpy(iwe.u.name,"802.11b");
-					else
-						strcpy(iwe.u.name,"802.11b/g");
-				}
-			}
-		}
-	}
-
-		previous_ev = current_ev;
-		current_ev	 = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_ADDR_LEN);
-		if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-	   		return -E2BIG;
-#else
-			break;
-#endif
-
-		//ESSID
-		//================================
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = SIOCGIWESSID;
-		iwe.u.data.length = pAdapter->ScanTab.BssEntry[i].SsidLen;
-		iwe.u.data.flags = 1;
-
-        previous_ev = current_ev;
-		current_ev = iwe_stream_add_point(info, current_ev, end_buf, &iwe, pAdapter->ScanTab.BssEntry[i].Ssid);
-        if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-            return -E2BIG;
-#else
-			break;
-#endif
-
-		//Network Type
-		//================================
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = SIOCGIWMODE;
-		if (pAdapter->ScanTab.BssEntry[i].BssType == Ndis802_11IBSS)
-		{
-			iwe.u.mode = IW_MODE_ADHOC;
-		}
-		else if (pAdapter->ScanTab.BssEntry[i].BssType == Ndis802_11Infrastructure)
-		{
-			iwe.u.mode = IW_MODE_INFRA;
-		}
-		else
-		{
-			iwe.u.mode = IW_MODE_AUTO;
-		}
-		iwe.len = IW_EV_UINT_LEN;
-
-        previous_ev = current_ev;
-		current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe,  IW_EV_UINT_LEN);
-        if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-            return -E2BIG;
-#else
-			break;
-#endif
-
-		//Channel and Frequency
-		//================================
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = SIOCGIWFREQ;
-		if (INFRA_ON(pAdapter) || ADHOC_ON(pAdapter))
-			iwe.u.freq.m = pAdapter->ScanTab.BssEntry[i].Channel;
-		else
-			iwe.u.freq.m = pAdapter->ScanTab.BssEntry[i].Channel;
-		iwe.u.freq.e = 0;
-		iwe.u.freq.i = 0;
-
-		previous_ev = current_ev;
-		current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_FREQ_LEN);
-        if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-            return -E2BIG;
-#else
-			break;
-#endif
-
-        //Add quality statistics
-        //================================
-        memset(&iwe, 0, sizeof(iwe));
-    	iwe.cmd = IWEVQUAL;
-    	iwe.u.qual.level = 0;
-    	iwe.u.qual.noise = 0;
-        set_quality(pAdapter, &iwe.u.qual, pAdapter->ScanTab.BssEntry[i].Rssi);
-    	current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_QUAL_LEN);
-        if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-            return -E2BIG;
-#else
-			break;
-#endif
-
-		//Encyption key
-		//================================
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = SIOCGIWENCODE;
-		if (CAP_IS_PRIVACY_ON (pAdapter->ScanTab.BssEntry[i].CapabilityInfo ))
-			iwe.u.data.flags =IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
-		else
-			iwe.u.data.flags = IW_ENCODE_DISABLED;
-
-        previous_ev = current_ev;
-        current_ev = iwe_stream_add_point(info, current_ev, end_buf,&iwe, (char *)pAdapter->SharedKey[BSS0][(iwe.u.data.flags & IW_ENCODE_INDEX)-1].Key);
-        if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-            return -E2BIG;
-#else
-			break;
-#endif
-
-		//Bit Rate
-		//================================
-		if (pAdapter->ScanTab.BssEntry[i].SupRateLen)
-        {
-            UCHAR tmpRate = pAdapter->ScanTab.BssEntry[i].SupRate[pAdapter->ScanTab.BssEntry[i].SupRateLen-1];
-			memset(&iwe, 0, sizeof(iwe));
-			iwe.cmd = SIOCGIWRATE;
-    		current_val = current_ev + IW_EV_LCP_LEN;
-            if (tmpRate == 0x82)
-                iwe.u.bitrate.value =  1 * 1000000;
-            else if (tmpRate == 0x84)
-                iwe.u.bitrate.value =  2 * 1000000;
-            else if (tmpRate == 0x8B)
-                iwe.u.bitrate.value =  5.5 * 1000000;
-            else if (tmpRate == 0x96)
-                iwe.u.bitrate.value =  11 * 1000000;
-            else
-    		    iwe.u.bitrate.value =  (tmpRate/2) * 1000000;
-
-			iwe.u.bitrate.disabled = 0;
-			current_val = iwe_stream_add_value(info, current_ev,
-				current_val, end_buf, &iwe,
-    			IW_EV_PARAM_LEN);
-
-        	if((current_val-current_ev)>IW_EV_LCP_LEN)
-            	current_ev = current_val;
-        	else
-#if WIRELESS_EXT >= 17
-                return -E2BIG;
-#else
-			    break;
-#endif
-        }
-
-#ifdef IWEVGENIE
-		//WPA IE
-		if (pAdapter->ScanTab.BssEntry[i].WpaIE.IELen > 0)
-		{
-			memset(&iwe, 0, sizeof(iwe));
-			memset(&custom[0], 0, MAX_CUSTOM_LEN);
-			memcpy(custom, &(pAdapter->ScanTab.BssEntry[i].WpaIE.IE[0]),
-						   pAdapter->ScanTab.BssEntry[i].WpaIE.IELen);
-			iwe.cmd = IWEVGENIE;
-			iwe.u.data.length = pAdapter->ScanTab.BssEntry[i].WpaIE.IELen;
-			current_ev = iwe_stream_add_point(info, current_ev, end_buf, &iwe, custom);
-			if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-                return -E2BIG;
-#else
-			    break;
-#endif
-		}
-
-		//WPA2 IE
-        if (pAdapter->ScanTab.BssEntry[i].RsnIE.IELen > 0)
-        {
-        	memset(&iwe, 0, sizeof(iwe));
-			memset(&custom[0], 0, MAX_CUSTOM_LEN);
-			memcpy(custom, &(pAdapter->ScanTab.BssEntry[i].RsnIE.IE[0]),
-						   pAdapter->ScanTab.BssEntry[i].RsnIE.IELen);
-			iwe.cmd = IWEVGENIE;
-			iwe.u.data.length = pAdapter->ScanTab.BssEntry[i].RsnIE.IELen;
-			current_ev = iwe_stream_add_point(info, current_ev, end_buf, &iwe, custom);
-			if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-                return -E2BIG;
-#else
-			    break;
-#endif
-        }
-#else
-        //WPA IE
-		//================================
-        if (pAdapter->ScanTab.BssEntry[i].WpaIE.IELen > 0)
-        {
-    		NdisZeroMemory(&iwe, sizeof(iwe));
-			memset(&custom[0], 0, MAX_CUSTOM_LEN);
-    		iwe.cmd = IWEVCUSTOM;
-            iwe.u.data.length = (pAdapter->ScanTab.BssEntry[i].WpaIE.IELen * 2) + 7;
-            NdisMoveMemory(custom, "wpa_ie=", 7);
-            for (idx = 0; idx < pAdapter->ScanTab.BssEntry[i].WpaIE.IELen; idx++)
-                sprintf(custom, "%s%02x", custom, pAdapter->ScanTab.BssEntry[i].WpaIE.IE[idx]);
-            previous_ev = current_ev;
-    		current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe,  custom);
-            if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-                return -E2BIG;
-#else
-			    break;
-#endif
-        }
-
-        //WPA2 IE
-        if (pAdapter->ScanTab.BssEntry[i].RsnIE.IELen > 0)
-        {
-    		NdisZeroMemory(&iwe, sizeof(iwe));
-			memset(&custom[0], 0, MAX_CUSTOM_LEN);
-    		iwe.cmd = IWEVCUSTOM;
-            iwe.u.data.length = (pAdapter->ScanTab.BssEntry[i].RsnIE.IELen * 2) + 7;
-            NdisMoveMemory(custom, "rsn_ie=", 7);
-			for (idx = 0; idx < pAdapter->ScanTab.BssEntry[i].RsnIE.IELen; idx++)
-                sprintf(custom, "%s%02x", custom, pAdapter->ScanTab.BssEntry[i].RsnIE.IE[idx]);
-            previous_ev = current_ev;
-    		current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe,  custom);
-            if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
-                return -E2BIG;
-#else
-			    break;
-#endif
-        }
-#endif // IWEVGENIE //
-	}
-
-	data->length = current_ev - extra;
-    pAdapter->StaCfg.bScanReqIsFromWebUI = FALSE;
-	DBGPRINT(RT_DEBUG_ERROR ,("===>rt_ioctl_giwscan. %d(%d) BSS returned, data->length = %d\n",i , pAdapter->ScanTab.BssNr, data->length));
-	return 0;
-}
-#endif
-
-int rt_ioctl_siwessid(struct net_device *dev,
-			 struct iw_request_info *info,
-			 struct iw_point *data, char *essid)
-{
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
-	//check if the interface is down
-    if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-       	DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-       	return -ENETDOWN;
-    }
-
-	if (data->flags)
-	{
-		PCHAR	pSsidString = NULL;
-
-		// Includes null character.
-		if (data->length > (IW_ESSID_MAX_SIZE + 1))
-			return -E2BIG;
-
-		pSsidString = (CHAR *) kmalloc(MAX_LEN_OF_SSID+1, MEM_ALLOC_FLAG);
-		if (pSsidString)
-		{
-			NdisZeroMemory(pSsidString, MAX_LEN_OF_SSID+1);
-			NdisMoveMemory(pSsidString, essid, data->length);
-			if (Set_SSID_Proc(pAdapter, pSsidString) == FALSE)
-				return -EINVAL;
-		}
-		else
-			return -ENOMEM;
-	}
-	else
-	{
-		// ANY ssid
-		if (Set_SSID_Proc(pAdapter, "") == FALSE)
-			return -EINVAL;
-    }
-	return 0;
-}
-
-int rt_ioctl_giwessid(struct net_device *dev,
-			 struct iw_request_info *info,
-			 struct iw_point *data, char *essid)
-{
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
-	data->flags = 1;
-    if (MONITOR_ON(pAdapter))
-    {
-        data->length  = 0;
-        return 0;
-    }
-
-	if (OPSTATUS_TEST_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED))
-	{
-		DBGPRINT(RT_DEBUG_TRACE ,("MediaState is connected\n"));
-		data->length = pAdapter->CommonCfg.SsidLen;
-		memcpy(essid, pAdapter->CommonCfg.Ssid, pAdapter->CommonCfg.SsidLen);
-	}
-#ifdef RT2870
-#ifdef WPA_SUPPLICANT_SUPPORT
-    // Add for RT2870
-    else if (pAdapter->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
-    {
-        data->length = pAdapter->CommonCfg.SsidLen;
-		memcpy(essid, pAdapter->CommonCfg.Ssid, pAdapter->CommonCfg.SsidLen);
-	}
-#endif // WPA_SUPPLICANT_SUPPORT //
-#endif // RT2870 //
-	else
-	{//the ANY ssid was specified
-		data->length  = 0;
-		DBGPRINT(RT_DEBUG_TRACE ,("MediaState is not connected, ess\n"));
-	}
-
-	return 0;
-
-}
-
-int rt_ioctl_siwnickn(struct net_device *dev,
-			 struct iw_request_info *info,
-			 struct iw_point *data, char *nickname)
-{
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
-    //check if the interface is down
-    if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-        DBGPRINT(RT_DEBUG_TRACE ,("INFO::Network is down!\n"));
-        return -ENETDOWN;
-    }
-
-	if (data->length > IW_ESSID_MAX_SIZE)
-		return -EINVAL;
-
-	memset(pAdapter->nickname, 0, IW_ESSID_MAX_SIZE + 1);
-	memcpy(pAdapter->nickname, nickname, data->length);
-
-
-	return 0;
-}
-
-int rt_ioctl_giwnickn(struct net_device *dev,
-			 struct iw_request_info *info,
-			 struct iw_point *data, char *nickname)
-{
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
-	if (data->length > strlen(pAdapter->nickname) + 1)
-		data->length = strlen(pAdapter->nickname) + 1;
-	if (data->length > 0) {
-		memcpy(nickname, pAdapter->nickname, data->length-1);
-		nickname[data->length-1] = '\0';
-	}
-	return 0;
-}
-
-int rt_ioctl_siwrts(struct net_device *dev,
-		       struct iw_request_info *info,
-		       struct iw_param *rts, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-	u16 val;
-
-    //check if the interface is down
-    if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-        return -ENETDOWN;
-    }
-
-	if (rts->disabled)
-		val = MAX_RTS_THRESHOLD;
-	else if (rts->value < 0 || rts->value > MAX_RTS_THRESHOLD)
-		return -EINVAL;
-	else if (rts->value == 0)
-	    val = MAX_RTS_THRESHOLD;
-	else
-		val = rts->value;
-
-	if (val != pAdapter->CommonCfg.RtsThreshold)
-		pAdapter->CommonCfg.RtsThreshold = val;
-
-	return 0;
-}
-
-int rt_ioctl_giwrts(struct net_device *dev,
-		       struct iw_request_info *info,
-		       struct iw_param *rts, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
-	//check if the interface is down
-    	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    	{
-      		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-        	return -ENETDOWN;
-    	}
-
-	rts->value = pAdapter->CommonCfg.RtsThreshold;
-	rts->disabled = (rts->value == MAX_RTS_THRESHOLD);
-	rts->fixed = 1;
-
-	return 0;
-}
-
-int rt_ioctl_siwfrag(struct net_device *dev,
-			struct iw_request_info *info,
-			struct iw_param *frag, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-	u16 val;
-
-	//check if the interface is down
-    	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    	{
-      		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-        	return -ENETDOWN;
-    	}
-
-	if (frag->disabled)
-		val = MAX_FRAG_THRESHOLD;
-	else if (frag->value >= MIN_FRAG_THRESHOLD || frag->value <= MAX_FRAG_THRESHOLD)
-        val = __cpu_to_le16(frag->value & ~0x1); /* even numbers only */
-	else if (frag->value == 0)
-	    val = MAX_FRAG_THRESHOLD;
-	else
-		return -EINVAL;
-
-	pAdapter->CommonCfg.FragmentThreshold = val;
-	return 0;
-}
-
-int rt_ioctl_giwfrag(struct net_device *dev,
-			struct iw_request_info *info,
-			struct iw_param *frag, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
-	//check if the interface is down
-    	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    	{
-      		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-        	return -ENETDOWN;
-    	}
-
-	frag->value = pAdapter->CommonCfg.FragmentThreshold;
-	frag->disabled = (frag->value == MAX_FRAG_THRESHOLD);
-	frag->fixed = 1;
-
-	return 0;
-}
-
-#define MAX_WEP_KEY_SIZE 13
-#define MIN_WEP_KEY_SIZE 5
-int rt_ioctl_siwencode(struct net_device *dev,
-			  struct iw_request_info *info,
-			  struct iw_point *erq, char *extra)
-{
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
-	//check if the interface is down
-    	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    	{
-      		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-        	return -ENETDOWN;
-    	}
-
-	if ((erq->length == 0) &&
-        (erq->flags & IW_ENCODE_DISABLED))
-	{
-		pAdapter->StaCfg.PairCipher = Ndis802_11WEPDisabled;
-		pAdapter->StaCfg.GroupCipher = Ndis802_11WEPDisabled;
-		pAdapter->StaCfg.WepStatus = Ndis802_11WEPDisabled;
-        pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
-        goto done;
-	}
-	else if (erq->flags & IW_ENCODE_RESTRICTED || erq->flags & IW_ENCODE_OPEN)
-	{
-	    //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-		STA_PORT_SECURED(pAdapter);
-		pAdapter->StaCfg.PairCipher = Ndis802_11WEPEnabled;
-		pAdapter->StaCfg.GroupCipher = Ndis802_11WEPEnabled;
-		pAdapter->StaCfg.WepStatus = Ndis802_11WEPEnabled;
-        pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-		if (erq->flags & IW_ENCODE_RESTRICTED)
-			pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeShared;
-    	else
-			pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
-	}
-
-    if (erq->length > 0)
-	{
-		int keyIdx = (erq->flags & IW_ENCODE_INDEX) - 1;
-		/* Check the size of the key */
-		if (erq->length > MAX_WEP_KEY_SIZE)
-		{
-			return -EINVAL;
-		}
-		/* Check key index */
-		if ((keyIdx < 0) || (keyIdx >= NR_WEP_KEYS))
-        {
-            DBGPRINT(RT_DEBUG_TRACE ,("==>rt_ioctl_siwencode::Wrong keyIdx=%d! Using default key instead (%d)\n",
-                                        keyIdx, pAdapter->StaCfg.DefaultKeyId));
-
-            //Using default key
-			keyIdx = pAdapter->StaCfg.DefaultKeyId;
-        }
-		else
-		{
-			pAdapter->StaCfg.DefaultKeyId=keyIdx;
-		}
-
-        NdisZeroMemory(pAdapter->SharedKey[BSS0][keyIdx].Key,  16);
-
-		if (erq->length == MAX_WEP_KEY_SIZE)
-        {
-			pAdapter->SharedKey[BSS0][keyIdx].KeyLen = MAX_WEP_KEY_SIZE;
-            pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CIPHER_WEP128;
-		}
-		else if (erq->length == MIN_WEP_KEY_SIZE)
-        {
-            pAdapter->SharedKey[BSS0][keyIdx].KeyLen = MIN_WEP_KEY_SIZE;
-            pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CIPHER_WEP64;
-		}
-		else
-			/* Disable the key */
-			pAdapter->SharedKey[BSS0][keyIdx].KeyLen = 0;
-
-		/* Check if the key is not marked as invalid */
-		if(!(erq->flags & IW_ENCODE_NOKEY))
-		{
-			/* Copy the key in the driver */
-			NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, extra, erq->length);
-        }
-	}
-    else
-			{
-		/* Do we want to just set the transmit key index ? */
-		int index = (erq->flags & IW_ENCODE_INDEX) - 1;
-		if ((index >= 0) && (index < 4))
-        {
-			pAdapter->StaCfg.DefaultKeyId = index;
-            }
-        else
-			/* Don't complain if only change the mode */
-		if(!erq->flags & IW_ENCODE_MODE)
-		{
-				return -EINVAL;
-		}
-	}
-
-done:
-    DBGPRINT(RT_DEBUG_TRACE ,("==>rt_ioctl_siwencode::erq->flags=%x\n",erq->flags));
-	DBGPRINT(RT_DEBUG_TRACE ,("==>rt_ioctl_siwencode::AuthMode=%x\n",pAdapter->StaCfg.AuthMode));
-	DBGPRINT(RT_DEBUG_TRACE ,("==>rt_ioctl_siwencode::DefaultKeyId=%x, KeyLen = %d\n",pAdapter->StaCfg.DefaultKeyId , pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen));
-	DBGPRINT(RT_DEBUG_TRACE ,("==>rt_ioctl_siwencode::WepStatus=%x\n",pAdapter->StaCfg.WepStatus));
-	return 0;
-}
-
-int
-rt_ioctl_giwencode(struct net_device *dev,
-			  struct iw_request_info *info,
-			  struct iw_point *erq, char *key)
-{
-	PRTMP_ADAPTER pAdapter = dev->ml_priv;
-	int kid;
-
-	//check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-  		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-    	return -ENETDOWN;
-	}
-
-	kid = erq->flags & IW_ENCODE_INDEX;
-	DBGPRINT(RT_DEBUG_TRACE, ("===>rt_ioctl_giwencode %d\n", erq->flags & IW_ENCODE_INDEX));
-
-	if (pAdapter->StaCfg.WepStatus == Ndis802_11WEPDisabled)
-	{
-		erq->length = 0;
-		erq->flags = IW_ENCODE_DISABLED;
-	}
-	else if ((kid > 0) && (kid <=4))
-	{
-		// copy wep key
-		erq->flags = kid ;			/* NB: base 1 */
-		if (erq->length > pAdapter->SharedKey[BSS0][kid-1].KeyLen)
-			erq->length = pAdapter->SharedKey[BSS0][kid-1].KeyLen;
-		memcpy(key, pAdapter->SharedKey[BSS0][kid-1].Key, erq->length);
-		//if ((kid == pAdapter->PortCfg.DefaultKeyId))
-		//erq->flags |= IW_ENCODE_ENABLED;	/* XXX */
-		if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeShared)
-			erq->flags |= IW_ENCODE_RESTRICTED;		/* XXX */
-		else
-			erq->flags |= IW_ENCODE_OPEN;		/* XXX */
-
-	}
-	else if (kid == 0)
-	{
-		if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeShared)
-			erq->flags |= IW_ENCODE_RESTRICTED;		/* XXX */
-		else
-			erq->flags |= IW_ENCODE_OPEN;		/* XXX */
-		erq->length = pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen;
-		memcpy(key, pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].Key, erq->length);
-		// copy default key ID
-		if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeShared)
-			erq->flags |= IW_ENCODE_RESTRICTED;		/* XXX */
-		else
-			erq->flags |= IW_ENCODE_OPEN;		/* XXX */
-		erq->flags = pAdapter->StaCfg.DefaultKeyId + 1;			/* NB: base 1 */
-		erq->flags |= IW_ENCODE_ENABLED;	/* XXX */
-	}
-
-	return 0;
-
-}
-
-static int
-rt_ioctl_setparam(struct net_device *dev, struct iw_request_info *info,
-			 void *w, char *extra)
-{
-    VIRTUAL_ADAPTER	*pVirtualAd = NULL;
-	PRTMP_ADAPTER pAdapter;
-	POS_COOKIE pObj;
-	char *this_char = extra;
-	char *value;
-	int  Status=0;
-
-	if (dev->priv_flags == INT_MAIN)
-	{
-		pAdapter = dev->ml_priv;
-	}
-	else
-	{
-		pVirtualAd = dev->ml_priv;
-		pAdapter = pVirtualAd->RtmpDev->ml_priv;
-	}
-	pObj = (POS_COOKIE) pAdapter->OS_Cookie;
-
-	if (pAdapter == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->ml_priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-	{
-		pObj->ioctl_if_type = INT_MAIN;
-        pObj->ioctl_if = MAIN_MBSSID;
-	}
-
-	//check if the interface is down
-    	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    	{
-      		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-			return -ENETDOWN;
-    	}
-
-	if (!*this_char)
-		return -EINVAL;
-
-	if ((value = rtstrchr(this_char, '=')) != NULL)
-	    *value++ = 0;
-
-	if (!value)
-	    return -EINVAL;
-
-	// reject setting nothing besides ANY ssid(ssidLen=0)
-    if (!*value && (strcmp(this_char, "SSID") != 0))
-        return -EINVAL;
-
-	for (PRTMP_PRIVATE_SET_PROC = RTMP_PRIVATE_SUPPORT_PROC; PRTMP_PRIVATE_SET_PROC->name; PRTMP_PRIVATE_SET_PROC++)
-	{
-	    if (strcmp(this_char, PRTMP_PRIVATE_SET_PROC->name) == 0)
-	    {
-	        if(!PRTMP_PRIVATE_SET_PROC->set_proc(pAdapter, value))
-	        {	//FALSE:Set private failed then return Invalid argument
-			    Status = -EINVAL;
-	        }
-		    break;	//Exit for loop.
-	    }
-	}
-
-	if(PRTMP_PRIVATE_SET_PROC->name == NULL)
-	{  //Not found argument
-	    Status = -EINVAL;
-	    DBGPRINT(RT_DEBUG_TRACE, ("===>rt_ioctl_setparam:: (iwpriv) Not Support Set Command [%s=%s]\n", this_char, value));
-	}
-
-    return Status;
-}
-
-
-static int
-rt_private_get_statistics(struct net_device *dev, struct iw_request_info *info,
-		struct iw_point *wrq, char *extra)
-{
-	INT				Status = 0;
-    PRTMP_ADAPTER   pAd = dev->ml_priv;
-
-    if (extra == NULL)
-    {
-        wrq->length = 0;
-        return -EIO;
-    }
-
-    memset(extra, 0x00, IW_PRIV_SIZE_MASK);
-    sprintf(extra, "\n\n");
-
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-	{
-	    sprintf(extra+strlen(extra), "Tx success                      = %ld\n", (ULONG)pAd->ate.TxDoneCount);
-	    //sprintf(extra+strlen(extra), "Tx success without retry        = %ld\n", (ULONG)pAd->ate.TxDoneCount);
-	}
-	else
-#endif // RALINK_ATE //
-	{
-    sprintf(extra+strlen(extra), "Tx success                      = %ld\n", (ULONG)pAd->WlanCounters.TransmittedFragmentCount.QuadPart);
-    sprintf(extra+strlen(extra), "Tx success without retry        = %ld\n", (ULONG)pAd->WlanCounters.TransmittedFragmentCount.QuadPart - (ULONG)pAd->WlanCounters.RetryCount.QuadPart);
-	}
-    sprintf(extra+strlen(extra), "Tx success after retry          = %ld\n", (ULONG)pAd->WlanCounters.RetryCount.QuadPart);
-    sprintf(extra+strlen(extra), "Tx fail to Rcv ACK after retry  = %ld\n", (ULONG)pAd->WlanCounters.FailedCount.QuadPart);
-    sprintf(extra+strlen(extra), "RTS Success Rcv CTS             = %ld\n", (ULONG)pAd->WlanCounters.RTSSuccessCount.QuadPart);
-    sprintf(extra+strlen(extra), "RTS Fail Rcv CTS                = %ld\n", (ULONG)pAd->WlanCounters.RTSFailureCount.QuadPart);
-
-    sprintf(extra+strlen(extra), "Rx success                      = %ld\n", (ULONG)pAd->WlanCounters.ReceivedFragmentCount.QuadPart);
-    sprintf(extra+strlen(extra), "Rx with CRC                     = %ld\n", (ULONG)pAd->WlanCounters.FCSErrorCount.QuadPart);
-    sprintf(extra+strlen(extra), "Rx drop due to out of resource  = %ld\n", (ULONG)pAd->Counters8023.RxNoBuffer);
-    sprintf(extra+strlen(extra), "Rx duplicate frame              = %ld\n", (ULONG)pAd->WlanCounters.FrameDuplicateCount.QuadPart);
-
-    sprintf(extra+strlen(extra), "False CCA (one second)          = %ld\n", (ULONG)pAd->RalinkCounters.OneSecFalseCCACnt);
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-	{
-		if (pAd->ate.RxAntennaSel == 0)
-		{
-    		sprintf(extra+strlen(extra), "RSSI-A                          = %ld\n", (LONG)(pAd->ate.LastRssi0 - pAd->BbpRssiToDbmDelta));
-			sprintf(extra+strlen(extra), "RSSI-B (if available)           = %ld\n", (LONG)(pAd->ate.LastRssi1 - pAd->BbpRssiToDbmDelta));
-			sprintf(extra+strlen(extra), "RSSI-C (if available)           = %ld\n\n", (LONG)(pAd->ate.LastRssi2 - pAd->BbpRssiToDbmDelta));
-		}
-		else
-		{
-    		sprintf(extra+strlen(extra), "RSSI                            = %ld\n", (LONG)(pAd->ate.LastRssi0 - pAd->BbpRssiToDbmDelta));
-		}
-	}
-	else
-#endif // RALINK_ATE //
-	{
-    	sprintf(extra+strlen(extra), "RSSI-A                          = %ld\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi0 - pAd->BbpRssiToDbmDelta));
-        sprintf(extra+strlen(extra), "RSSI-B (if available)           = %ld\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi1 - pAd->BbpRssiToDbmDelta));
-        sprintf(extra+strlen(extra), "RSSI-C (if available)           = %ld\n\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi2 - pAd->BbpRssiToDbmDelta));
-	}
-#ifdef WPA_SUPPLICANT_SUPPORT
-    sprintf(extra+strlen(extra), "WpaSupplicantUP                 = %d\n\n", pAd->StaCfg.WpaSupplicantUP);
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-
-    wrq->length = strlen(extra) + 1; // 1: size of '\0'
-    DBGPRINT(RT_DEBUG_TRACE, ("<== rt_private_get_statistics, wrq->length = %d\n", wrq->length));
-
-    return Status;
-}
-
-#ifdef DOT11_N_SUPPORT
-void	getBaInfo(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			pOutBuf)
-{
-	INT i, j;
-	BA_ORI_ENTRY *pOriBAEntry;
-	BA_REC_ENTRY *pRecBAEntry;
-
-	for (i=0; i<MAX_LEN_OF_MAC_TABLE; i++)
-	{
-		PMAC_TABLE_ENTRY pEntry = &pAd->MacTab.Content[i];
-		if (((pEntry->ValidAsCLI || pEntry->ValidAsApCli) && (pEntry->Sst == SST_ASSOC))
-			|| (pEntry->ValidAsWDS) || (pEntry->ValidAsMesh))
-		{
-			sprintf(pOutBuf, "%s\n%02X:%02X:%02X:%02X:%02X:%02X (Aid = %d) (AP) -\n",
-                pOutBuf,
-				pEntry->Addr[0], pEntry->Addr[1], pEntry->Addr[2],
-				pEntry->Addr[3], pEntry->Addr[4], pEntry->Addr[5], pEntry->Aid);
-
-			sprintf(pOutBuf, "%s[Recipient]\n", pOutBuf);
-			for (j=0; j < NUM_OF_TID; j++)
-			{
-				if (pEntry->BARecWcidArray[j] != 0)
-				{
-					pRecBAEntry =&pAd->BATable.BARecEntry[pEntry->BARecWcidArray[j]];
-					sprintf(pOutBuf, "%sTID=%d, BAWinSize=%d, LastIndSeq=%d, ReorderingPkts=%d\n", pOutBuf, j, pRecBAEntry->BAWinSize, pRecBAEntry->LastIndSeq, pRecBAEntry->list.qlen);
-				}
-			}
-			sprintf(pOutBuf, "%s\n", pOutBuf);
-
-			sprintf(pOutBuf, "%s[Originator]\n", pOutBuf);
-			for (j=0; j < NUM_OF_TID; j++)
-			{
-				if (pEntry->BAOriWcidArray[j] != 0)
-				{
-					pOriBAEntry =&pAd->BATable.BAOriEntry[pEntry->BAOriWcidArray[j]];
-					sprintf(pOutBuf, "%sTID=%d, BAWinSize=%d, StartSeq=%d, CurTxSeq=%d\n", pOutBuf, j, pOriBAEntry->BAWinSize, pOriBAEntry->Sequence, pEntry->TxSeq[j]);
-				}
-			}
-			sprintf(pOutBuf, "%s\n\n", pOutBuf);
-		}
-        if (strlen(pOutBuf) > (IW_PRIV_SIZE_MASK - 30))
-                break;
-	}
-
-	return;
-}
-#endif // DOT11_N_SUPPORT //
-
-static int
-rt_private_show(struct net_device *dev, struct iw_request_info *info,
-		struct iw_point *wrq, char *extra)
-{
-    INT				Status = 0;
-    VIRTUAL_ADAPTER	*pVirtualAd = NULL;
-    PRTMP_ADAPTER   pAd;
-	POS_COOKIE		pObj;
-    u32             subcmd = wrq->flags;
-
-	if (dev->priv_flags == INT_MAIN)
-		pAd = dev->ml_priv;
-	else
-	{
-		pVirtualAd = dev->ml_priv;
-		pAd = pVirtualAd->RtmpDev->ml_priv;
-	}
-	pObj = (POS_COOKIE) pAd->OS_Cookie;
-
-	if (pAd == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->ml_priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-    if (extra == NULL)
-    {
-        wrq->length = 0;
-        return -EIO;
-    }
-    memset(extra, 0x00, IW_PRIV_SIZE_MASK);
-
-	{
-		pObj->ioctl_if_type = INT_MAIN;
-        pObj->ioctl_if = MAIN_MBSSID;
-	}
-
-    switch(subcmd)
-    {
-
-        case SHOW_CONN_STATUS:
-            if (MONITOR_ON(pAd))
-            {
-#ifdef DOT11_N_SUPPORT
-                if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED &&
-                    pAd->CommonCfg.RegTransmitSetting.field.BW)
-                    sprintf(extra, "Monitor Mode(CentralChannel %d)\n", pAd->CommonCfg.CentralChannel);
-                else
-#endif // DOT11_N_SUPPORT //
-                    sprintf(extra, "Monitor Mode(Channel %d)\n", pAd->CommonCfg.Channel);
-            }
-            else
-            {
-                if (pAd->IndicateMediaState == NdisMediaStateConnected)
-            	{
-            	    if (INFRA_ON(pAd))
-                    {
-                    sprintf(extra, "Connected(AP: %s[%02X:%02X:%02X:%02X:%02X:%02X])\n",
-                                    pAd->CommonCfg.Ssid,
-                                    pAd->CommonCfg.Bssid[0],
-                                    pAd->CommonCfg.Bssid[1],
-                                    pAd->CommonCfg.Bssid[2],
-                                    pAd->CommonCfg.Bssid[3],
-                                    pAd->CommonCfg.Bssid[4],
-                                    pAd->CommonCfg.Bssid[5]);
-            		DBGPRINT(RT_DEBUG_TRACE ,("Ssid=%s ,Ssidlen = %d\n",pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen));
-            	}
-                    else if (ADHOC_ON(pAd))
-                        sprintf(extra, "Connected\n");
-            	}
-            	else
-            	{
-            	    sprintf(extra, "Disconnected\n");
-            		DBGPRINT(RT_DEBUG_TRACE ,("ConnStatus is not connected\n"));
-            	}
-            }
-            wrq->length = strlen(extra) + 1; // 1: size of '\0'
-            break;
-        case SHOW_DRVIER_VERION:
-            sprintf(extra, "Driver version-%s, %s %s\n", STA_DRIVER_VERSION, __DATE__, __TIME__ );
-            wrq->length = strlen(extra) + 1; // 1: size of '\0'
-            break;
-#ifdef DOT11_N_SUPPORT
-        case SHOW_BA_INFO:
-            getBaInfo(pAd, extra);
-            wrq->length = strlen(extra) + 1; // 1: size of '\0'
-            break;
-#endif // DOT11_N_SUPPORT //
-		case SHOW_DESC_INFO:
-			{
-				Show_DescInfo_Proc(pAd, NULL);
-				wrq->length = 0; // 1: size of '\0'
-			}
-			break;
-        case RAIO_OFF:
-            if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-            {
-                sprintf(extra, "Scanning\n");
-                wrq->length = strlen(extra) + 1; // 1: size of '\0'
-                break;
-            }
-            pAd->StaCfg.bSwRadio = FALSE;
-            if (pAd->StaCfg.bRadio != (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio))
-            {
-                pAd->StaCfg.bRadio = (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio);
-                if (pAd->StaCfg.bRadio == FALSE)
-                {
-                    MlmeRadioOff(pAd);
-                    // Update extra information
-					pAd->ExtraInfo = SW_RADIO_OFF;
-                }
-            }
-            sprintf(extra, "Radio Off\n");
-            wrq->length = strlen(extra) + 1; // 1: size of '\0'
-            break;
-        case RAIO_ON:
-            if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-            {
-                sprintf(extra, "Scanning\n");
-                wrq->length = strlen(extra) + 1; // 1: size of '\0'
-                break;
-            }
-            pAd->StaCfg.bSwRadio = TRUE;
-            //if (pAd->StaCfg.bRadio != (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio))
-            {
-                pAd->StaCfg.bRadio = (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio);
-                if (pAd->StaCfg.bRadio == TRUE)
-                {
-                    MlmeRadioOn(pAd);
-                    // Update extra information
-					pAd->ExtraInfo = EXTRA_INFO_CLEAR;
-                }
-            }
-            sprintf(extra, "Radio On\n");
-            wrq->length = strlen(extra) + 1; // 1: size of '\0'
-            break;
-
-
-#ifdef QOS_DLS_SUPPORT
-		case SHOW_DLS_ENTRY_INFO:
-			{
-				Set_DlsEntryInfo_Display_Proc(pAd, NULL);
-				wrq->length = 0; // 1: size of '\0'
-			}
-			break;
-#endif // QOS_DLS_SUPPORT //
-
-		case SHOW_CFG_VALUE:
-			{
-				Status = RTMPShowCfgValue(pAd, wrq->pointer, extra);
-				if (Status == 0)
-					wrq->length = strlen(extra) + 1; // 1: size of '\0'
-			}
-			break;
-        default:
-            DBGPRINT(RT_DEBUG_TRACE, ("%s - unknow subcmd = %d\n", __FUNCTION__, subcmd));
-            break;
-    }
-
-    return Status;
-}
-
-#ifdef SIOCSIWMLME
-int rt_ioctl_siwmlme(struct net_device *dev,
-			   struct iw_request_info *info,
-			   union iwreq_data *wrqu,
-			   char *extra)
-{
-	PRTMP_ADAPTER   pAd = dev->ml_priv;
-	struct iw_mlme *pMlme = (struct iw_mlme *)wrqu->data.pointer;
-	MLME_QUEUE_ELEM				MsgElem;
-	MLME_DISASSOC_REQ_STRUCT	DisAssocReq;
-	MLME_DEAUTH_REQ_STRUCT      DeAuthReq;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("====> %s\n", __FUNCTION__));
-
-	if (pMlme == NULL)
-		return -EINVAL;
-
-	switch(pMlme->cmd)
-	{
-#ifdef IW_MLME_DEAUTH
-		case IW_MLME_DEAUTH:
-			DBGPRINT(RT_DEBUG_TRACE, ("====> %s - IW_MLME_DEAUTH\n", __FUNCTION__));
-			COPY_MAC_ADDR(DeAuthReq.Addr, pAd->CommonCfg.Bssid);
-			DeAuthReq.Reason = pMlme->reason_code;
-			MsgElem.MsgLen = sizeof(MLME_DEAUTH_REQ_STRUCT);
-			NdisMoveMemory(MsgElem.Msg, &DeAuthReq, sizeof(MLME_DEAUTH_REQ_STRUCT));
-			MlmeDeauthReqAction(pAd, &MsgElem);
-			if (INFRA_ON(pAd))
-			{
-			    LinkDown(pAd, FALSE);
-			    pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-			}
-			break;
-#endif // IW_MLME_DEAUTH //
-#ifdef IW_MLME_DISASSOC
-		case IW_MLME_DISASSOC:
-			DBGPRINT(RT_DEBUG_TRACE, ("====> %s - IW_MLME_DISASSOC\n", __FUNCTION__));
-			COPY_MAC_ADDR(DisAssocReq.Addr, pAd->CommonCfg.Bssid);
-			DisAssocReq.Reason =  pMlme->reason_code;
-
-			MsgElem.Machine = ASSOC_STATE_MACHINE;
-			MsgElem.MsgType = MT2_MLME_DISASSOC_REQ;
-			MsgElem.MsgLen = sizeof(MLME_DISASSOC_REQ_STRUCT);
-			NdisMoveMemory(MsgElem.Msg, &DisAssocReq, sizeof(MLME_DISASSOC_REQ_STRUCT));
-
-			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
-			MlmeDisassocReqAction(pAd, &MsgElem);
-			break;
-#endif // IW_MLME_DISASSOC //
-		default:
-			DBGPRINT(RT_DEBUG_TRACE, ("====> %s - Unknow Command\n", __FUNCTION__));
-			break;
-	}
-
-	return 0;
-}
-#endif // SIOCSIWMLME //
-
-#if WIRELESS_EXT > 17
-int rt_ioctl_siwauth(struct net_device *dev,
-			  struct iw_request_info *info,
-			  union iwreq_data *wrqu, char *extra)
-{
-	PRTMP_ADAPTER   pAdapter = dev->ml_priv;
-	struct iw_param *param = &wrqu->param;
-
-    //check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-  		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-    	return -ENETDOWN;
-	}
-	switch (param->flags & IW_AUTH_INDEX) {
-    	case IW_AUTH_WPA_VERSION:
-            if (param->value == IW_AUTH_WPA_VERSION_WPA)
-            {
-                pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPAPSK;
-				if (pAdapter->StaCfg.BssType == BSS_ADHOC)
-					pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPANone;
-            }
-            else if (param->value == IW_AUTH_WPA_VERSION_WPA2)
-                pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2PSK;
-
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_WPA_VERSION - param->value = %d!\n", __FUNCTION__, param->value));
-            break;
-    	case IW_AUTH_CIPHER_PAIRWISE:
-            if (param->value == IW_AUTH_CIPHER_NONE)
-            {
-                pAdapter->StaCfg.WepStatus = Ndis802_11WEPDisabled;
-                pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-                pAdapter->StaCfg.PairCipher = Ndis802_11WEPDisabled;
-            }
-            else if (param->value == IW_AUTH_CIPHER_WEP40 ||
-                     param->value == IW_AUTH_CIPHER_WEP104)
-            {
-                pAdapter->StaCfg.WepStatus = Ndis802_11WEPEnabled;
-                pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-                pAdapter->StaCfg.PairCipher = Ndis802_11WEPEnabled;
-#ifdef WPA_SUPPLICANT_SUPPORT
-                pAdapter->StaCfg.IEEE8021X = FALSE;
-#endif // WPA_SUPPLICANT_SUPPORT //
-            }
-            else if (param->value == IW_AUTH_CIPHER_TKIP)
-            {
-                pAdapter->StaCfg.WepStatus = Ndis802_11Encryption2Enabled;
-                pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-                pAdapter->StaCfg.PairCipher = Ndis802_11Encryption2Enabled;
-            }
-            else if (param->value == IW_AUTH_CIPHER_CCMP)
-            {
-                pAdapter->StaCfg.WepStatus = Ndis802_11Encryption3Enabled;
-                pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-                pAdapter->StaCfg.PairCipher = Ndis802_11Encryption3Enabled;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_CIPHER_PAIRWISE - param->value = %d!\n", __FUNCTION__, param->value));
-            break;
-    	case IW_AUTH_CIPHER_GROUP:
-            if (param->value == IW_AUTH_CIPHER_NONE)
-            {
-                pAdapter->StaCfg.GroupCipher = Ndis802_11WEPDisabled;
-            }
-            else if (param->value == IW_AUTH_CIPHER_WEP40 ||
-                     param->value == IW_AUTH_CIPHER_WEP104)
-            {
-                pAdapter->StaCfg.GroupCipher = Ndis802_11WEPEnabled;
-            }
-            else if (param->value == IW_AUTH_CIPHER_TKIP)
-            {
-                pAdapter->StaCfg.GroupCipher = Ndis802_11Encryption2Enabled;
-            }
-            else if (param->value == IW_AUTH_CIPHER_CCMP)
-            {
-                pAdapter->StaCfg.GroupCipher = Ndis802_11Encryption3Enabled;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_CIPHER_GROUP - param->value = %d!\n", __FUNCTION__, param->value));
-            break;
-    	case IW_AUTH_KEY_MGMT:
-            if (param->value == IW_AUTH_KEY_MGMT_802_1X)
-            {
-                if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK)
-                {
-                    pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA;
-#ifdef WPA_SUPPLICANT_SUPPORT
-                    pAdapter->StaCfg.IEEE8021X = FALSE;
-#endif // WPA_SUPPLICANT_SUPPORT //
-                }
-                else if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)
-                {
-                    pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2;
-#ifdef WPA_SUPPLICANT_SUPPORT
-                    pAdapter->StaCfg.IEEE8021X = FALSE;
-#endif // WPA_SUPPLICANT_SUPPORT //
-                }
-#ifdef WPA_SUPPLICANT_SUPPORT
-                else
-                    // WEP 1x
-                    pAdapter->StaCfg.IEEE8021X = TRUE;
-#endif // WPA_SUPPLICANT_SUPPORT //
-            }
-            else if (param->value == 0)
-            {
-                //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-				STA_PORT_SECURED(pAdapter);
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_KEY_MGMT - param->value = %d!\n", __FUNCTION__, param->value));
-            break;
-    	case IW_AUTH_RX_UNENCRYPTED_EAPOL:
-            break;
-    	case IW_AUTH_PRIVACY_INVOKED:
-            /*if (param->value == 0)
-			{
-                pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
-                pAdapter->StaCfg.WepStatus = Ndis802_11WEPDisabled;
-                pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-                pAdapter->StaCfg.PairCipher = Ndis802_11WEPDisabled;
-        	    pAdapter->StaCfg.GroupCipher = Ndis802_11WEPDisabled;
-            }*/
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_PRIVACY_INVOKED - param->value = %d!\n", __FUNCTION__, param->value));
-    		break;
-    	case IW_AUTH_DROP_UNENCRYPTED:
-            if (param->value != 0)
-                pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-			else
-			{
-                //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-				STA_PORT_SECURED(pAdapter);
-			}
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_WPA_VERSION - param->value = %d!\n", __FUNCTION__, param->value));
-    		break;
-    	case IW_AUTH_80211_AUTH_ALG:
-			if (param->value & IW_AUTH_ALG_SHARED_KEY)
-            {
-				pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeShared;
-			}
-            else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM)
-            {
-				pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
-			}
-            else
-				return -EINVAL;
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_80211_AUTH_ALG - param->value = %d!\n", __FUNCTION__, param->value));
-			break;
-    	case IW_AUTH_WPA_ENABLED:
-    		DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_WPA_ENABLED - Driver supports WPA!(param->value = %d)\n", __FUNCTION__, param->value));
-    		break;
-    	default:
-    		return -EOPNOTSUPP;
-}
-
-	return 0;
-}
-
-int rt_ioctl_giwauth(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-	PRTMP_ADAPTER   pAdapter = dev->ml_priv;
-	struct iw_param *param = &wrqu->param;
-
-    //check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-  		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-    	return -ENETDOWN;
-    }
-
-	switch (param->flags & IW_AUTH_INDEX) {
-	case IW_AUTH_DROP_UNENCRYPTED:
-        param->value = (pAdapter->StaCfg.WepStatus == Ndis802_11WEPDisabled) ? 0 : 1;
-		break;
-
-	case IW_AUTH_80211_AUTH_ALG:
-        param->value = (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeShared) ? IW_AUTH_ALG_SHARED_KEY : IW_AUTH_ALG_OPEN_SYSTEM;
-		break;
-
-	case IW_AUTH_WPA_ENABLED:
-		param->value = (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA) ? 1 : 0;
-		break;
-
-	default:
-		return -EOPNOTSUPP;
-	}
-    DBGPRINT(RT_DEBUG_TRACE, ("rt_ioctl_giwauth::param->value = %d!\n", param->value));
-	return 0;
-}
-
-void fnSetCipherKey(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  INT             keyIdx,
-    IN  UCHAR           CipherAlg,
-    IN  BOOLEAN         bGTK,
-    IN  struct iw_encode_ext *ext)
-{
-    NdisZeroMemory(&pAdapter->SharedKey[BSS0][keyIdx], sizeof(CIPHER_KEY));
-    pAdapter->SharedKey[BSS0][keyIdx].KeyLen = LEN_TKIP_EK;
-    NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, ext->key, LEN_TKIP_EK);
-    NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].TxMic, ext->key + LEN_TKIP_EK, LEN_TKIP_TXMICK);
-    NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].RxMic, ext->key + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK);
-    pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CipherAlg;
-
-    // Update group key information to ASIC Shared Key Table
-	AsicAddSharedKeyEntry(pAdapter,
-						  BSS0,
-						  keyIdx,
-						  pAdapter->SharedKey[BSS0][keyIdx].CipherAlg,
-						  pAdapter->SharedKey[BSS0][keyIdx].Key,
-						  pAdapter->SharedKey[BSS0][keyIdx].TxMic,
-						  pAdapter->SharedKey[BSS0][keyIdx].RxMic);
-
-    if (bGTK)
-        // Update ASIC WCID attribute table and IVEIV table
-    	RTMPAddWcidAttributeEntry(pAdapter,
-    							  BSS0,
-    							  keyIdx,
-    							  pAdapter->SharedKey[BSS0][keyIdx].CipherAlg,
-    							  NULL);
-    else
-        // Update ASIC WCID attribute table and IVEIV table
-    	RTMPAddWcidAttributeEntry(pAdapter,
-    							  BSS0,
-    							  keyIdx,
-    							  pAdapter->SharedKey[BSS0][keyIdx].CipherAlg,
-    							  &pAdapter->MacTab.Content[BSSID_WCID]);
-}
-
-int rt_ioctl_siwencodeext(struct net_device *dev,
-			   struct iw_request_info *info,
-			   union iwreq_data *wrqu,
-			   char *extra)
-			{
-    PRTMP_ADAPTER   pAdapter = dev->ml_priv;
-	struct iw_point *encoding = &wrqu->encoding;
-	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
-    int keyIdx, alg = ext->alg;
-
-    //check if the interface is down
-	if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-  		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-    	return -ENETDOWN;
-	}
-
-    if (encoding->flags & IW_ENCODE_DISABLED)
-	{
-        keyIdx = (encoding->flags & IW_ENCODE_INDEX) - 1;
-        // set BSSID wcid entry of the Pair-wise Key table as no-security mode
-	    AsicRemovePairwiseKeyEntry(pAdapter, BSS0, BSSID_WCID);
-        pAdapter->SharedKey[BSS0][keyIdx].KeyLen = 0;
-		pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CIPHER_NONE;
-		AsicRemoveSharedKeyEntry(pAdapter, 0, (UCHAR)keyIdx);
-        NdisZeroMemory(&pAdapter->SharedKey[BSS0][keyIdx], sizeof(CIPHER_KEY));
-        DBGPRINT(RT_DEBUG_TRACE, ("%s::Remove all keys!(encoding->flags = %x)\n", __FUNCTION__, encoding->flags));
-    }
-					else
-    {
-        // Get Key Index and convet to our own defined key index
-    	keyIdx = (encoding->flags & IW_ENCODE_INDEX) - 1;
-    	if((keyIdx < 0) || (keyIdx >= NR_WEP_KEYS))
-    		return -EINVAL;
-
-        if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)
-        {
-            pAdapter->StaCfg.DefaultKeyId = keyIdx;
-            DBGPRINT(RT_DEBUG_TRACE, ("%s::DefaultKeyId = %d\n", __FUNCTION__, pAdapter->StaCfg.DefaultKeyId));
-        }
-
-        switch (alg) {
-    		case IW_ENCODE_ALG_NONE:
-                DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_ENCODE_ALG_NONE\n", __FUNCTION__));
-    			break;
-    		case IW_ENCODE_ALG_WEP:
-                DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_ENCODE_ALG_WEP - ext->key_len = %d, keyIdx = %d\n", __FUNCTION__, ext->key_len, keyIdx));
-    			if (ext->key_len == MAX_WEP_KEY_SIZE)
-                {
-        			pAdapter->SharedKey[BSS0][keyIdx].KeyLen = MAX_WEP_KEY_SIZE;
-                    pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CIPHER_WEP128;
-				}
-        		else if (ext->key_len == MIN_WEP_KEY_SIZE)
-                {
-                    pAdapter->SharedKey[BSS0][keyIdx].KeyLen = MIN_WEP_KEY_SIZE;
-                    pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CIPHER_WEP64;
-			}
-        		else
-                    return -EINVAL;
-
-                NdisZeroMemory(pAdapter->SharedKey[BSS0][keyIdx].Key,  16);
-			    NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, ext->key, ext->key_len);
-    			break;
-            case IW_ENCODE_ALG_TKIP:
-                DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_ENCODE_ALG_TKIP - keyIdx = %d, ext->key_len = %d\n", __FUNCTION__, keyIdx, ext->key_len));
-                if (ext->key_len == 32)
-                {
-                    if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)
-                    {
-                        fnSetCipherKey(pAdapter, keyIdx, CIPHER_TKIP, FALSE, ext);
-                        if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA2)
-                        {
-                            //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-                            STA_PORT_SECURED(pAdapter);
-                        }
-		}
-                    else if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY)
-                    {
-                        fnSetCipherKey(pAdapter, keyIdx, CIPHER_TKIP, TRUE, ext);
-
-                        // set 802.1x port control
-            	        //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-            	        STA_PORT_SECURED(pAdapter);
-                    }
-                }
-                else
-                    return -EINVAL;
-                break;
-            case IW_ENCODE_ALG_CCMP:
-                if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)
-		{
-                    fnSetCipherKey(pAdapter, keyIdx, CIPHER_AES, FALSE, ext);
-                    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA2)
-                    	//pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-                    	STA_PORT_SECURED(pAdapter);
-                }
-                else if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY)
-                {
-                    fnSetCipherKey(pAdapter, keyIdx, CIPHER_AES, TRUE, ext);
-
-                    // set 802.1x port control
-        	        //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-        	        STA_PORT_SECURED(pAdapter);
-                }
-                break;
-    		default:
-    			return -EINVAL;
-		}
-    }
-
-    return 0;
-}
-
-int
-rt_ioctl_giwencodeext(struct net_device *dev,
-			  struct iw_request_info *info,
-			  union iwreq_data *wrqu, char *extra)
-{
-	PRTMP_ADAPTER pAd = dev->ml_priv;
-	PCHAR pKey = NULL;
-	struct iw_point *encoding = &wrqu->encoding;
-	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
-	int idx, max_key_len;
-
-	DBGPRINT(RT_DEBUG_TRACE ,("===> rt_ioctl_giwencodeext\n"));
-
-	max_key_len = encoding->length - sizeof(*ext);
-	if (max_key_len < 0)
-		return -EINVAL;
-
-	idx = encoding->flags & IW_ENCODE_INDEX;
-	if (idx)
-	{
-		if (idx < 1 || idx > 4)
-			return -EINVAL;
-		idx--;
-
-		if ((pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled) ||
-			(pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled))
-		{
-			if (idx != pAd->StaCfg.DefaultKeyId)
-			{
-				ext->key_len = 0;
-				return 0;
-			}
-		}
-	}
-	else
-		idx = pAd->StaCfg.DefaultKeyId;
-
-	encoding->flags = idx + 1;
-	memset(ext, 0, sizeof(*ext));
-
-	ext->key_len = 0;
-	switch(pAd->StaCfg.WepStatus) {
-		case Ndis802_11WEPDisabled:
-			ext->alg = IW_ENCODE_ALG_NONE;
-			encoding->flags |= IW_ENCODE_DISABLED;
-			break;
-		case Ndis802_11WEPEnabled:
-			ext->alg = IW_ENCODE_ALG_WEP;
-			if (pAd->SharedKey[BSS0][idx].KeyLen > max_key_len)
-				return -E2BIG;
-			else
-			{
-				ext->key_len = pAd->SharedKey[BSS0][idx].KeyLen;
-				pKey = &(pAd->SharedKey[BSS0][idx].Key[0]);
-			}
-			break;
-		case Ndis802_11Encryption2Enabled:
-		case Ndis802_11Encryption3Enabled:
-			if (pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled)
-				ext->alg = IW_ENCODE_ALG_TKIP;
-			else
-				ext->alg = IW_ENCODE_ALG_CCMP;
-
-			if (max_key_len < 32)
-				return -E2BIG;
-			else
-			{
-				ext->key_len = 32;
-				pKey = &pAd->StaCfg.PMK[0];
-			}
-			break;
-		default:
-			return -EINVAL;
-	}
-
-	if (ext->key_len && pKey)
-	{
-		encoding->flags |= IW_ENCODE_ENABLED;
-		memcpy(ext->key, pKey, ext->key_len);
-	}
-
-	return 0;
-}
-
-#ifdef SIOCSIWGENIE
-int rt_ioctl_siwgenie(struct net_device *dev,
-			  struct iw_request_info *info,
-			  union iwreq_data *wrqu, char *extra)
-{
-	PRTMP_ADAPTER   pAd = dev->ml_priv;
-
-	if (wrqu->data.length > MAX_LEN_OF_RSNIE ||
-	    (wrqu->data.length && extra == NULL))
-		return -EINVAL;
-
-	if (wrqu->data.length)
-	{
-		pAd->StaCfg.RSNIE_Len = wrqu->data.length;
-		NdisMoveMemory(&pAd->StaCfg.RSN_IE[0], extra, pAd->StaCfg.RSNIE_Len);
-	}
-	else
-	{
-		pAd->StaCfg.RSNIE_Len = 0;
-		NdisZeroMemory(&pAd->StaCfg.RSN_IE[0], MAX_LEN_OF_RSNIE);
-	}
-
-	return 0;
-}
-#endif // SIOCSIWGENIE //
-
-int rt_ioctl_giwgenie(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-	PRTMP_ADAPTER   pAd = dev->ml_priv;
-
-	if ((pAd->StaCfg.RSNIE_Len == 0) ||
-		(pAd->StaCfg.AuthMode < Ndis802_11AuthModeWPA))
-	{
-		wrqu->data.length = 0;
-		return 0;
-	}
-
-#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
-#ifdef SIOCSIWGENIE
-	if (pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE)
-	{
-	if (wrqu->data.length < pAd->StaCfg.RSNIE_Len)
-		return -E2BIG;
-
-	wrqu->data.length = pAd->StaCfg.RSNIE_Len;
-	memcpy(extra, &pAd->StaCfg.RSN_IE[0], pAd->StaCfg.RSNIE_Len);
-	}
-	else
-#endif // SIOCSIWGENIE //
-#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
-	{
-		UCHAR RSNIe = IE_WPA;
-
-		if (wrqu->data.length < (pAd->StaCfg.RSNIE_Len + 2)) // ID, Len
-			return -E2BIG;
-		wrqu->data.length = pAd->StaCfg.RSNIE_Len + 2;
-
-		if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK) ||
-            (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2))
-			RSNIe = IE_RSN;
-
-		extra[0] = (char)RSNIe;
-		extra[1] = pAd->StaCfg.RSNIE_Len;
-		memcpy(extra+2, &pAd->StaCfg.RSN_IE[0], pAd->StaCfg.RSNIE_Len);
-	}
-
-	return 0;
-}
-
-int rt_ioctl_siwpmksa(struct net_device *dev,
-			   struct iw_request_info *info,
-			   union iwreq_data *wrqu,
-			   char *extra)
-{
-	PRTMP_ADAPTER   pAd = dev->ml_priv;
-	struct iw_pmksa *pPmksa = (struct iw_pmksa *)wrqu->data.pointer;
-	INT	CachedIdx = 0, idx = 0;
-
-	if (pPmksa == NULL)
-		return -EINVAL;
-
-	DBGPRINT(RT_DEBUG_TRACE ,("===> rt_ioctl_siwpmksa\n"));
-	switch(pPmksa->cmd)
-	{
-		case IW_PMKSA_FLUSH:
-			NdisZeroMemory(pAd->StaCfg.SavedPMK, sizeof(BSSID_INFO)*PMKID_NO);
-			DBGPRINT(RT_DEBUG_TRACE ,("rt_ioctl_siwpmksa - IW_PMKSA_FLUSH\n"));
-			break;
-		case IW_PMKSA_REMOVE:
-			for (CachedIdx = 0; CachedIdx < pAd->StaCfg.SavedPMKNum; CachedIdx++)
-			{
-		        // compare the BSSID
-		        if (NdisEqualMemory(pPmksa->bssid.sa_data, pAd->StaCfg.SavedPMK[CachedIdx].BSSID, MAC_ADDR_LEN))
-		        {
-		        	NdisZeroMemory(pAd->StaCfg.SavedPMK[CachedIdx].BSSID, MAC_ADDR_LEN);
-					NdisZeroMemory(pAd->StaCfg.SavedPMK[CachedIdx].PMKID, 16);
-					for (idx = CachedIdx; idx < (pAd->StaCfg.SavedPMKNum - 1); idx++)
-					{
-						NdisMoveMemory(&pAd->StaCfg.SavedPMK[idx].BSSID[0], &pAd->StaCfg.SavedPMK[idx+1].BSSID[0], MAC_ADDR_LEN);
-						NdisMoveMemory(&pAd->StaCfg.SavedPMK[idx].PMKID[0], &pAd->StaCfg.SavedPMK[idx+1].PMKID[0], 16);
-					}
-					pAd->StaCfg.SavedPMKNum--;
-			        break;
-		        }
-	        }
-
-			DBGPRINT(RT_DEBUG_TRACE ,("rt_ioctl_siwpmksa - IW_PMKSA_REMOVE\n"));
-			break;
-		case IW_PMKSA_ADD:
-			for (CachedIdx = 0; CachedIdx < pAd->StaCfg.SavedPMKNum; CachedIdx++)
-			{
-		        // compare the BSSID
-		        if (NdisEqualMemory(pPmksa->bssid.sa_data, pAd->StaCfg.SavedPMK[CachedIdx].BSSID, MAC_ADDR_LEN))
-			        break;
-	        }
-
-	        // Found, replace it
-	        if (CachedIdx < PMKID_NO)
-	        {
-		        DBGPRINT(RT_DEBUG_OFF, ("Update PMKID, idx = %d\n", CachedIdx));
-		        NdisMoveMemory(&pAd->StaCfg.SavedPMK[CachedIdx].BSSID[0], pPmksa->bssid.sa_data, MAC_ADDR_LEN);
-				NdisMoveMemory(&pAd->StaCfg.SavedPMK[CachedIdx].PMKID[0], pPmksa->pmkid, 16);
-		        pAd->StaCfg.SavedPMKNum++;
-	        }
-	        // Not found, replace the last one
-	        else
-	        {
-		        // Randomly replace one
-		        CachedIdx = (pPmksa->bssid.sa_data[5] % PMKID_NO);
-		        DBGPRINT(RT_DEBUG_OFF, ("Update PMKID, idx = %d\n", CachedIdx));
-		        NdisMoveMemory(&pAd->StaCfg.SavedPMK[CachedIdx].BSSID[0], pPmksa->bssid.sa_data, MAC_ADDR_LEN);
-				NdisMoveMemory(&pAd->StaCfg.SavedPMK[CachedIdx].PMKID[0], pPmksa->pmkid, 16);
-	        }
-
-			DBGPRINT(RT_DEBUG_TRACE ,("rt_ioctl_siwpmksa - IW_PMKSA_ADD\n"));
-			break;
-		default:
-			DBGPRINT(RT_DEBUG_TRACE ,("rt_ioctl_siwpmksa - Unknow Command!!\n"));
-			break;
-	}
-
-	return 0;
-}
-#endif // #if WIRELESS_EXT > 17
-
-#ifdef DBG
-static int
-rt_private_ioctl_bbp(struct net_device *dev, struct iw_request_info *info,
-		struct iw_point *wrq, char *extra)
-			{
-	CHAR				*this_char;
-	CHAR				*value = NULL;
-	UCHAR				regBBP = 0;
-//	CHAR				arg[255]={0};
-	UINT32				bbpId;
-	UINT32				bbpValue;
-	BOOLEAN				bIsPrintAllBBP = FALSE;
-	INT					Status = 0;
-    PRTMP_ADAPTER       pAdapter = dev->ml_priv;
-
-
-	memset(extra, 0x00, IW_PRIV_SIZE_MASK);
-
-	if (wrq->length > 1) //No parameters.
-				{
-		sprintf(extra, "\n");
-
-		//Parsing Read or Write
-		this_char = wrq->pointer;
-		DBGPRINT(RT_DEBUG_TRACE, ("this_char=%s\n", this_char));
-		if (!*this_char)
-			goto next;
-
-		if ((value = rtstrchr(this_char, '=')) != NULL)
-			*value++ = 0;
-
-		if (!value || !*value)
-		{ //Read
-			DBGPRINT(RT_DEBUG_TRACE, ("this_char=%s, value=%s\n", this_char, value));
-			if (sscanf(this_char, "%d", &(bbpId)) == 1)
-			{
-#ifndef RT30xx
-				if (bbpId <= 136)
-#endif // RT30xx //
-#ifdef RT30xx
-				if (bbpId <= 138)  // edit by johnli, RF power sequence setup, add BBP R138 for ADC dynamic on/off control
-#endif // RT30xx //
-				{
-#ifdef RALINK_ATE
-					if (ATE_ON(pAdapter))
-					{
-						ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-					}
-					else
-#endif // RALINK_ATE //
-					{
-					RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-					}
-					sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X\n", bbpId, bbpId*2, regBBP);
-                    wrq->length = strlen(extra) + 1; // 1: size of '\0'
-					DBGPRINT(RT_DEBUG_TRACE, ("msg=%s\n", extra));
-				}
-				else
-				{//Invalid parametes, so default printk all bbp
-					bIsPrintAllBBP = TRUE;
-					goto next;
-				}
-			}
-			else
-			{ //Invalid parametes, so default printk all bbp
-				bIsPrintAllBBP = TRUE;
-				goto next;
-			}
-		}
-		else
-		{ //Write
-			if ((sscanf(this_char, "%d", &(bbpId)) == 1) && (sscanf(value, "%x", &(bbpValue)) == 1))
-			{
-#ifndef RT30xx
-				if (bbpId <= 136)
-#endif // RT30xx //
-#ifdef RT30xx
-				if (bbpId <= 138)  // edit by johnli, RF power sequence setup, add BBP R138 for ADC dynamic on/off control
-#endif // RT30xx //
-				{
-#ifdef RALINK_ATE
-					if (ATE_ON(pAdapter))
-					{
-						ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, bbpId, bbpValue);
-						//Read it back for showing
-						ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-					}
-					else
-#endif // RALINK_ATE //
-					{
-					    RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, bbpId, bbpValue);
-    					//Read it back for showing
-    					RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-			}
-					sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X\n", bbpId, bbpId*2, regBBP);
-                    wrq->length = strlen(extra) + 1; // 1: size of '\0'
-					DBGPRINT(RT_DEBUG_TRACE, ("msg=%s\n", extra));
-				}
-				else
-				{//Invalid parametes, so default printk all bbp
-					bIsPrintAllBBP = TRUE;
-					goto next;
-				}
-			}
-			else
-			{ //Invalid parametes, so default printk all bbp
-				bIsPrintAllBBP = TRUE;
-				goto next;
-			}
-		}
-		}
-	else
-		bIsPrintAllBBP = TRUE;
-
-next:
-	if (bIsPrintAllBBP)
-	{
-		memset(extra, 0x00, IW_PRIV_SIZE_MASK);
-		sprintf(extra, "\n");
-#ifndef RT30xx
-		for (bbpId = 0; bbpId <= 136; bbpId++)
-#endif // RT30xx //
-#ifdef RT30xx
-		for (bbpId = 0; bbpId <= 138; bbpId++)  // edit by johnli, RF power sequence setup, add BBP R138 for ADC dynamic on/off control
-#endif // RT30xx //
-		{
-		    if (strlen(extra) >= (IW_PRIV_SIZE_MASK - 10))
-                break;
-#ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-			}
-			else
-#endif // RALINK_ATE //
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-/*
-			sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X    ", bbpId, bbpId*2, regBBP);
-			if (bbpId%5 == 4)
-				sprintf(extra+strlen(extra), "\n");
-*/
-			sprintf(extra+strlen(extra), "%03d = %02X\n", bbpId, regBBP);  // edit by johnli, change display format
-		}
-
-        wrq->length = strlen(extra) + 1; // 1: size of '\0'
-        DBGPRINT(RT_DEBUG_TRACE, ("wrq->length = %d\n", wrq->length));
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<==rt_private_ioctl_bbp\n\n"));
-
-    return Status;
-}
-#endif // DBG //
-
-int rt_ioctl_siwrate(struct net_device *dev,
-			struct iw_request_info *info,
-			union iwreq_data *wrqu, char *extra)
-{
-    PRTMP_ADAPTER   pAd = dev->ml_priv;
-    UINT32          rate = wrqu->bitrate.value, fixed = wrqu->bitrate.fixed;
-
-    //check if the interface is down
-	if(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-  		DBGPRINT(RT_DEBUG_TRACE, ("rt_ioctl_siwrate::Network is down!\n"));
-    	return -ENETDOWN;
-	}
-
-    DBGPRINT(RT_DEBUG_TRACE, ("rt_ioctl_siwrate::(rate = %d, fixed = %d)\n", rate, fixed));
-    /* rate = -1 => auto rate
-       rate = X, fixed = 1 => (fixed rate X)
-    */
-    if (rate == -1)
-    {
-		//Auto Rate
-		pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
-		pAd->StaCfg.bAutoTxRateSwitch = TRUE;
-		if ((pAd->CommonCfg.PhyMode <= PHY_11G) ||
-		    (pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE <= MODE_OFDM))
-			RTMPSetDesiredRates(pAd, -1);
-
-#ifdef DOT11_N_SUPPORT
-		SetCommonHT(pAd);
-#endif // DOT11_N_SUPPORT //
-    }
-    else
-    {
-        if (fixed)
-        {
-        	pAd->StaCfg.bAutoTxRateSwitch = FALSE;
-            if ((pAd->CommonCfg.PhyMode <= PHY_11G) ||
-                (pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE <= MODE_OFDM))
-                RTMPSetDesiredRates(pAd, rate);
-            else
-            {
-                pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
-#ifdef DOT11_N_SUPPORT
-                SetCommonHT(pAd);
-#endif // DOT11_N_SUPPORT //
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("rt_ioctl_siwrate::(HtMcs=%d)\n",pAd->StaCfg.DesiredTransmitSetting.field.MCS));
-        }
-        else
-        {
-            // TODO: rate = X, fixed = 0 => (rates <= X)
-            return -EOPNOTSUPP;
-        }
-    }
-
-    return 0;
-}
-
-int rt_ioctl_giwrate(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-    PRTMP_ADAPTER   pAd = dev->ml_priv;
-    int rate_index = 0, rate_count = 0;
-    HTTRANSMIT_SETTING ht_setting;
-    __s32 ralinkrate[] =
-	{2,  4,   11,  22, // CCK
-	12, 18,   24,  36, 48, 72, 96, 108, // OFDM
-	13, 26,   39,  52,  78, 104, 117, 130, 26,  52,  78, 104, 156, 208, 234, 260, // 20MHz, 800ns GI, MCS: 0 ~ 15
-	39, 78,  117, 156, 234, 312, 351, 390,										  // 20MHz, 800ns GI, MCS: 16 ~ 23
-	27, 54,   81, 108, 162, 216, 243, 270, 54, 108, 162, 216, 324, 432, 486, 540, // 40MHz, 800ns GI, MCS: 0 ~ 15
-	81, 162, 243, 324, 486, 648, 729, 810,										  // 40MHz, 800ns GI, MCS: 16 ~ 23
-	14, 29,   43,  57,  87, 115, 130, 144, 29, 59,   87, 115, 173, 230, 260, 288, // 20MHz, 400ns GI, MCS: 0 ~ 15
-	43, 87,  130, 173, 260, 317, 390, 433,										  // 20MHz, 400ns GI, MCS: 16 ~ 23
-	30, 60,   90, 120, 180, 240, 270, 300, 60, 120, 180, 240, 360, 480, 540, 600, // 40MHz, 400ns GI, MCS: 0 ~ 15
-	90, 180, 270, 360, 540, 720, 810, 900};										  // 40MHz, 400ns GI, MCS: 16 ~ 23
-
-    rate_count = sizeof(ralinkrate)/sizeof(__s32);
-    //check if the interface is down
-	if(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-	{
-  		DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-    	return -ENETDOWN;
-	}
-
-    if ((pAd->StaCfg.bAutoTxRateSwitch == FALSE) &&
-        (INFRA_ON(pAd)) &&
-        ((pAd->CommonCfg.PhyMode <= PHY_11G) || (pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE <= MODE_OFDM)))
-        ht_setting.word = pAd->StaCfg.HTPhyMode.word;
-    else
-        ht_setting.word = pAd->MacTab.Content[BSSID_WCID].HTPhyMode.word;
-
-#ifdef DOT11_N_SUPPORT
-    if (ht_setting.field.MODE >= MODE_HTMIX)
-    {
-//    	rate_index = 12 + ((UCHAR)ht_setting.field.BW *16) + ((UCHAR)ht_setting.field.ShortGI *32) + ((UCHAR)ht_setting.field.MCS);
-    	rate_index = 12 + ((UCHAR)ht_setting.field.BW *24) + ((UCHAR)ht_setting.field.ShortGI *48) + ((UCHAR)ht_setting.field.MCS);
-    }
-    else
-#endif // DOT11_N_SUPPORT //
-    if (ht_setting.field.MODE == MODE_OFDM)
-    	rate_index = (UCHAR)(ht_setting.field.MCS) + 4;
-    else if (ht_setting.field.MODE == MODE_CCK)
-    	rate_index = (UCHAR)(ht_setting.field.MCS);
-
-    if (rate_index < 0)
-        rate_index = 0;
-
-    if (rate_index > rate_count)
-        rate_index = rate_count;
-
-    wrqu->bitrate.value = ralinkrate[rate_index] * 500000;
-    wrqu->bitrate.disabled = 0;
-
-    return 0;
-}
-
-static const iw_handler rt_handler[] =
-{
-	(iw_handler) NULL,			            /* SIOCSIWCOMMIT */
-	(iw_handler) rt_ioctl_giwname,			/* SIOCGIWNAME   */
-	(iw_handler) NULL,			            /* SIOCSIWNWID   */
-	(iw_handler) NULL,			            /* SIOCGIWNWID   */
-	(iw_handler) rt_ioctl_siwfreq,		    /* SIOCSIWFREQ   */
-	(iw_handler) rt_ioctl_giwfreq,		    /* SIOCGIWFREQ   */
-	(iw_handler) rt_ioctl_siwmode,		    /* SIOCSIWMODE   */
-	(iw_handler) rt_ioctl_giwmode,		    /* SIOCGIWMODE   */
-	(iw_handler) NULL,		                /* SIOCSIWSENS   */
-	(iw_handler) NULL,		                /* SIOCGIWSENS   */
-	(iw_handler) NULL /* not used */,		/* SIOCSIWRANGE  */
-	(iw_handler) rt_ioctl_giwrange,		    /* SIOCGIWRANGE  */
-	(iw_handler) NULL /* not used */,		/* SIOCSIWPRIV   */
-	(iw_handler) NULL /* kernel code */,    /* SIOCGIWPRIV   */
-	(iw_handler) NULL /* not used */,		/* SIOCSIWSTATS  */
-	(iw_handler) rt28xx_get_wireless_stats /* kernel code */,    /* SIOCGIWSTATS  */
-	(iw_handler) NULL,		                /* SIOCSIWSPY    */
-	(iw_handler) NULL,		                /* SIOCGIWSPY    */
-	(iw_handler) NULL,				        /* SIOCSIWTHRSPY */
-	(iw_handler) NULL,				        /* SIOCGIWTHRSPY */
-	(iw_handler) rt_ioctl_siwap,            /* SIOCSIWAP     */
-	(iw_handler) rt_ioctl_giwap,		    /* SIOCGIWAP     */
-#ifdef SIOCSIWMLME
-	(iw_handler) rt_ioctl_siwmlme,	        /* SIOCSIWMLME   */
-#else
-	(iw_handler) NULL,				        /* SIOCSIWMLME */
-#endif // SIOCSIWMLME //
-	(iw_handler) rt_ioctl_iwaplist,		    /* SIOCGIWAPLIST */
-#ifdef SIOCGIWSCAN
-	(iw_handler) rt_ioctl_siwscan,		    /* SIOCSIWSCAN   */
-	(iw_handler) rt_ioctl_giwscan,		    /* SIOCGIWSCAN   */
-#else
-	(iw_handler) NULL,				        /* SIOCSIWSCAN   */
-	(iw_handler) NULL,				        /* SIOCGIWSCAN   */
-#endif /* SIOCGIWSCAN */
-	(iw_handler) rt_ioctl_siwessid,		    /* SIOCSIWESSID  */
-	(iw_handler) rt_ioctl_giwessid,		    /* SIOCGIWESSID  */
-	(iw_handler) rt_ioctl_siwnickn,		    /* SIOCSIWNICKN  */
-	(iw_handler) rt_ioctl_giwnickn,		    /* SIOCGIWNICKN  */
-	(iw_handler) NULL,				        /* -- hole --    */
-	(iw_handler) NULL,				        /* -- hole --    */
-	(iw_handler) rt_ioctl_siwrate,          /* SIOCSIWRATE   */
-	(iw_handler) rt_ioctl_giwrate,          /* SIOCGIWRATE   */
-	(iw_handler) rt_ioctl_siwrts,		    /* SIOCSIWRTS    */
-	(iw_handler) rt_ioctl_giwrts,		    /* SIOCGIWRTS    */
-	(iw_handler) rt_ioctl_siwfrag,		    /* SIOCSIWFRAG   */
-	(iw_handler) rt_ioctl_giwfrag,		    /* SIOCGIWFRAG   */
-	(iw_handler) NULL,		                /* SIOCSIWTXPOW  */
-	(iw_handler) NULL,		                /* SIOCGIWTXPOW  */
-	(iw_handler) NULL,		                /* SIOCSIWRETRY  */
-	(iw_handler) NULL,		                /* SIOCGIWRETRY  */
-	(iw_handler) rt_ioctl_siwencode,		/* SIOCSIWENCODE */
-	(iw_handler) rt_ioctl_giwencode,		/* SIOCGIWENCODE */
-	(iw_handler) NULL,		                /* SIOCSIWPOWER  */
-	(iw_handler) NULL,		                /* SIOCGIWPOWER  */
-	(iw_handler) NULL,						/* -- hole -- */
-	(iw_handler) NULL,						/* -- hole -- */
-#if WIRELESS_EXT > 17
-    (iw_handler) rt_ioctl_siwgenie,         /* SIOCSIWGENIE  */
-	(iw_handler) rt_ioctl_giwgenie,         /* SIOCGIWGENIE  */
-	(iw_handler) rt_ioctl_siwauth,		    /* SIOCSIWAUTH   */
-	(iw_handler) rt_ioctl_giwauth,		    /* SIOCGIWAUTH   */
-	(iw_handler) rt_ioctl_siwencodeext,	    /* SIOCSIWENCODEEXT */
-	(iw_handler) rt_ioctl_giwencodeext,		/* SIOCGIWENCODEEXT */
-	(iw_handler) rt_ioctl_siwpmksa,         /* SIOCSIWPMKSA  */
-#endif
-};
-
-static const iw_handler rt_priv_handlers[] = {
-	(iw_handler) NULL, /* + 0x00 */
-	(iw_handler) NULL, /* + 0x01 */
-#ifndef CONFIG_AP_SUPPORT
-	(iw_handler) rt_ioctl_setparam, /* + 0x02 */
-#else
-	(iw_handler) NULL, /* + 0x02 */
-#endif // CONFIG_AP_SUPPORT //
-#ifdef DBG
-	(iw_handler) rt_private_ioctl_bbp, /* + 0x03 */
-#else
-	(iw_handler) NULL, /* + 0x03 */
-#endif
-	(iw_handler) NULL, /* + 0x04 */
-	(iw_handler) NULL, /* + 0x05 */
-	(iw_handler) NULL, /* + 0x06 */
-	(iw_handler) NULL, /* + 0x07 */
-	(iw_handler) NULL, /* + 0x08 */
-	(iw_handler) rt_private_get_statistics, /* + 0x09 */
-	(iw_handler) NULL, /* + 0x0A */
-	(iw_handler) NULL, /* + 0x0B */
-	(iw_handler) NULL, /* + 0x0C */
-	(iw_handler) NULL, /* + 0x0D */
-	(iw_handler) NULL, /* + 0x0E */
-	(iw_handler) NULL, /* + 0x0F */
-	(iw_handler) NULL, /* + 0x10 */
-	(iw_handler) rt_private_show, /* + 0x11 */
-    (iw_handler) NULL, /* + 0x12 */
-	(iw_handler) NULL, /* + 0x13 */
-	(iw_handler) NULL, /* + 0x15 */
-	(iw_handler) NULL, /* + 0x17 */
-	(iw_handler) NULL, /* + 0x18 */
-};
-
-const struct iw_handler_def rt28xx_iw_handler_def =
-{
-#define	N(a)	(sizeof (a) / sizeof (a[0]))
-	.standard	= (iw_handler *) rt_handler,
-	.num_standard	= sizeof(rt_handler) / sizeof(iw_handler),
-	.private	= (iw_handler *) rt_priv_handlers,
-	.num_private		= N(rt_priv_handlers),
-	.private_args	= (struct iw_priv_args *) privtab,
-	.num_private_args	= N(privtab),
-#if IW_HANDLER_VERSION >= 7
-    .get_wireless_stats = rt28xx_get_wireless_stats,
-#endif
-};
-
-INT RTMPSetInformation(
-    IN  PRTMP_ADAPTER pAdapter,
-    IN  OUT struct ifreq    *rq,
-    IN  INT                 cmd)
-{
-    struct iwreq                        *wrq = (struct iwreq *) rq;
-    NDIS_802_11_SSID                    Ssid;
-    NDIS_802_11_MAC_ADDRESS             Bssid;
-    RT_802_11_PHY_MODE                  PhyMode;
-    RT_802_11_STA_CONFIG                StaConfig;
-    NDIS_802_11_RATES                   aryRates;
-    RT_802_11_PREAMBLE                  Preamble;
-    NDIS_802_11_WEP_STATUS              WepStatus;
-    NDIS_802_11_AUTHENTICATION_MODE     AuthMode = Ndis802_11AuthModeMax;
-    NDIS_802_11_NETWORK_INFRASTRUCTURE  BssType;
-    NDIS_802_11_RTS_THRESHOLD           RtsThresh;
-    NDIS_802_11_FRAGMENTATION_THRESHOLD FragThresh;
-    NDIS_802_11_POWER_MODE              PowerMode;
-    PNDIS_802_11_KEY                    pKey = NULL;
-    PNDIS_802_11_WEP			        pWepKey =NULL;
-    PNDIS_802_11_REMOVE_KEY             pRemoveKey = NULL;
-    NDIS_802_11_CONFIGURATION           Config, *pConfig = NULL;
-    NDIS_802_11_NETWORK_TYPE            NetType;
-    ULONG                               Now;
-    UINT                                KeyIdx = 0;
-    INT                                 Status = NDIS_STATUS_SUCCESS, MaxPhyMode = PHY_11G;
-    ULONG                               PowerTemp;
-    BOOLEAN                             RadioState;
-    BOOLEAN                             StateMachineTouched = FALSE;
-#ifdef DOT11_N_SUPPORT
-	OID_SET_HT_PHYMODE					HT_PhyMode;	//11n ,kathy
-#endif // DOT11_N_SUPPORT //
-#ifdef WPA_SUPPLICANT_SUPPORT
-    PNDIS_802_11_PMKID                  pPmkId = NULL;
-    BOOLEAN				                IEEE8021xState = FALSE;
-    BOOLEAN				                IEEE8021x_required_keys = FALSE;
-    UCHAR                               wpa_supplicant_enable = 0;
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef SNMP_SUPPORT
-	TX_RTY_CFG_STRUC			tx_rty_cfg;
-	ULONG						ShortRetryLimit, LongRetryLimit;
-	UCHAR						ctmp;
-#endif // SNMP_SUPPORT //
-
-
-#ifdef DOT11_N_SUPPORT
-	MaxPhyMode = PHY_11N_5G;
-#endif // DOT11_N_SUPPORT //
-
-
-	DBGPRINT(RT_DEBUG_TRACE, ("-->RTMPSetInformation(),	0x%08x\n", cmd&0x7FFF));
-    switch(cmd & 0x7FFF) {
-        case RT_OID_802_11_COUNTRY_REGION:
-            if (wrq->u.data.length < sizeof(UCHAR))
-                Status = -EINVAL;
-			// Only avaliable when EEPROM not programming
-            else if (!(pAdapter->CommonCfg.CountryRegion & 0x80) && !(pAdapter->CommonCfg.CountryRegionForABand & 0x80))
-            {
-                ULONG   Country;
-                UCHAR	TmpPhy;
-
-				Status = copy_from_user(&Country, wrq->u.data.pointer, wrq->u.data.length);
-				pAdapter->CommonCfg.CountryRegion = (UCHAR)(Country & 0x000000FF);
-				pAdapter->CommonCfg.CountryRegionForABand = (UCHAR)((Country >> 8) & 0x000000FF);
-                TmpPhy = pAdapter->CommonCfg.PhyMode;
-				pAdapter->CommonCfg.PhyMode = 0xff;
-				// Build all corresponding channel information
-				RTMPSetPhyMode(pAdapter, TmpPhy);
-#ifdef DOT11_N_SUPPORT
-				SetCommonHT(pAdapter);
-#endif // DOT11_N_SUPPORT //
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_COUNTRY_REGION (A:%d  B/G:%d)\n", pAdapter->CommonCfg.CountryRegionForABand,
-				    pAdapter->CommonCfg.CountryRegion));
-            }
-            break;
-        case OID_802_11_BSSID_LIST_SCAN:
- #ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				break;
-			}
-#endif // RALINK_ATE //
-            Now = jiffies;
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_BSSID_LIST_SCAN, TxCnt = %d \n", pAdapter->RalinkCounters.LastOneSecTotalTxCount));
-
-            if (MONITOR_ON(pAdapter))
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("!!! Driver is in Monitor Mode now !!!\n"));
-                break;
-            }
-
-			//Benson add 20080527, when radio off, sta don't need to scan
-			if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_RADIO_OFF))
-				break;
-
-			if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-			{
-                DBGPRINT(RT_DEBUG_TRACE, ("!!! Driver is scanning now !!!\n"));
-				pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE;
-				Status = NDIS_STATUS_SUCCESS;
-                break;
-            }
-
-			if (pAdapter->RalinkCounters.LastOneSecTotalTxCount > 100)
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("!!! Link UP, ignore this set::OID_802_11_BSSID_LIST_SCAN\n"));
-				Status = NDIS_STATUS_SUCCESS;
-				pAdapter->StaCfg.ScanCnt = 99;		// Prevent auto scan triggered by this OID
-				break;
-            }
-
-            if ((OPSTATUS_TEST_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED)) &&
-				((pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA) ||
-				(pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
-				(pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) ||
-				(pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)) &&
-                (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("!!! Link UP, Port Not Secured! ignore this set::OID_802_11_BSSID_LIST_SCAN\n"));
-				Status = NDIS_STATUS_SUCCESS;
-				pAdapter->StaCfg.ScanCnt = 99;		// Prevent auto scan triggered by this OID
-				break;
-            }
-
-
-            if (pAdapter->Mlme.CntlMachine.CurrState != CNTL_IDLE)
-            {
-                RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-                DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
-            }
-
-            // tell CNTL state machine to call NdisMSetInformationComplete() after completing
-            // this request, because this request is initiated by NDIS.
-            pAdapter->MlmeAux.CurrReqIsFromNdis = FALSE;
-            // Reset allowed scan retries
-            pAdapter->StaCfg.ScanCnt = 0;
-            pAdapter->StaCfg.LastScanTime = Now;
-
-			pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE;
-            RTMP_SET_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
-            MlmeEnqueue(pAdapter,
-                        MLME_CNTL_STATE_MACHINE,
-                        OID_802_11_BSSID_LIST_SCAN,
-                        0,
-                        NULL);
-
-            Status = NDIS_STATUS_SUCCESS;
-            StateMachineTouched = TRUE;
-            break;
-        case OID_802_11_SSID:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_SSID))
-                Status = -EINVAL;
-            else
-            {
-            	PCHAR pSsidString = NULL;
-                Status = copy_from_user(&Ssid, wrq->u.data.pointer, wrq->u.data.length);
-
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_SSID (Len=%d,Ssid=%s)\n", Ssid.SsidLength, Ssid.Ssid));
-                if (Ssid.SsidLength > MAX_LEN_OF_SSID)
-                    Status = -EINVAL;
-                else
-                {
-                	if (Ssid.SsidLength == 0)
-                	{
-                		Set_SSID_Proc(pAdapter, "");
-                	}
-					else
-                	{
-	                	pSsidString = (CHAR *) kmalloc(MAX_LEN_OF_SSID+1, MEM_ALLOC_FLAG);
-						if (pSsidString)
-						{
-							NdisZeroMemory(pSsidString, MAX_LEN_OF_SSID+1);
-							NdisMoveMemory(pSsidString, Ssid.Ssid, Ssid.SsidLength);
-	                		Set_SSID_Proc(pAdapter, pSsidString);
-							kfree(pSsidString);
-						}
-						else
-							Status = -ENOMEM;
-                	}
-                }
-            }
-            break;
-        case OID_802_11_BSSID:
-#ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				break;
-			}
-#endif // RALINK_ATE //
-            if (wrq->u.data.length != sizeof(NDIS_802_11_MAC_ADDRESS))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&Bssid, wrq->u.data.pointer, wrq->u.data.length);
-
-                // tell CNTL state machine to call NdisMSetInformationComplete() after completing
-                // this request, because this request is initiated by NDIS.
-                pAdapter->MlmeAux.CurrReqIsFromNdis = FALSE;
-
-				// Prevent to connect AP again in STAMlmePeriodicExec
-				pAdapter->MlmeAux.AutoReconnectSsidLen= 32;
-
-                // Reset allowed scan retries
-				pAdapter->StaCfg.ScanCnt = 0;
-
-                if (pAdapter->Mlme.CntlMachine.CurrState != CNTL_IDLE)
-                {
-                    RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-                    DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
-                }
-                MlmeEnqueue(pAdapter,
-                            MLME_CNTL_STATE_MACHINE,
-                            OID_802_11_BSSID,
-                            sizeof(NDIS_802_11_MAC_ADDRESS),
-                            (VOID *)&Bssid);
-                Status = NDIS_STATUS_SUCCESS;
-                StateMachineTouched = TRUE;
-
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_BSSID %02x:%02x:%02x:%02x:%02x:%02x\n",
-                                        Bssid[0], Bssid[1], Bssid[2], Bssid[3], Bssid[4], Bssid[5]));
-            }
-            break;
-        case RT_OID_802_11_RADIO:
-            if (wrq->u.data.length != sizeof(BOOLEAN))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&RadioState, wrq->u.data.pointer, wrq->u.data.length);
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_RADIO (=%d)\n", RadioState));
-                if (pAdapter->StaCfg.bSwRadio != RadioState)
-                {
-                    pAdapter->StaCfg.bSwRadio = RadioState;
-                    if (pAdapter->StaCfg.bRadio != (pAdapter->StaCfg.bHwRadio && pAdapter->StaCfg.bSwRadio))
-                    {
-                        pAdapter->StaCfg.bRadio = (pAdapter->StaCfg.bHwRadio && pAdapter->StaCfg.bSwRadio);
-                        if (pAdapter->StaCfg.bRadio == TRUE)
-                        {
-                            MlmeRadioOn(pAdapter);
-                            // Update extra information
-							pAdapter->ExtraInfo = EXTRA_INFO_CLEAR;
-                        }
-                        else
-                        {
-                            MlmeRadioOff(pAdapter);
-                            // Update extra information
-							pAdapter->ExtraInfo = SW_RADIO_OFF;
-                        }
-                    }
-                }
-            }
-            break;
-        case RT_OID_802_11_PHY_MODE:
-            if (wrq->u.data.length != sizeof(RT_802_11_PHY_MODE))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&PhyMode, wrq->u.data.pointer, wrq->u.data.length);
-				if (PhyMode <= MaxPhyMode)
-				{
-                	RTMPSetPhyMode(pAdapter, PhyMode);
-#ifdef DOT11_N_SUPPORT
-					SetCommonHT(pAdapter);
-#endif // DOT11_N_SUPPORT //
-				}
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_PHY_MODE (=%d)\n", PhyMode));
-            }
-            break;
-        case RT_OID_802_11_STA_CONFIG:
-            if (wrq->u.data.length != sizeof(RT_802_11_STA_CONFIG))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&StaConfig, wrq->u.data.pointer, wrq->u.data.length);
-                pAdapter->CommonCfg.bEnableTxBurst = StaConfig.EnableTxBurst;
-                pAdapter->CommonCfg.UseBGProtection = StaConfig.UseBGProtection;
-                pAdapter->CommonCfg.bUseShortSlotTime = 1; // 2003-10-30 always SHORT SLOT capable
-                if ((pAdapter->CommonCfg.PhyMode != StaConfig.AdhocMode) &&
-					(StaConfig.AdhocMode <= MaxPhyMode))
-                {
-                    // allow dynamic change of "USE OFDM rate or not" in ADHOC mode
-                    // if setting changed, need to reset current TX rate as well as BEACON frame format
-                    pAdapter->CommonCfg.PhyMode = StaConfig.AdhocMode;
-                    if (pAdapter->StaCfg.BssType == BSS_ADHOC)
-                    {
-                    	RTMPSetPhyMode(pAdapter, PhyMode);
-                        MlmeUpdateTxRates(pAdapter, FALSE, 0);
-                        MakeIbssBeacon(pAdapter);           // re-build BEACON frame
-                        AsicEnableIbssSync(pAdapter);   // copy to on-chip memory
-                    }
-                }
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_STA_CONFIG (Burst=%d, Protection=%ld,ShortSlot=%d\n",
-                                        pAdapter->CommonCfg.bEnableTxBurst,
-                                        pAdapter->CommonCfg.UseBGProtection,
-                                        pAdapter->CommonCfg.bUseShortSlotTime));
-            }
-            break;
-        case OID_802_11_DESIRED_RATES:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_RATES))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&aryRates, wrq->u.data.pointer, wrq->u.data.length);
-                NdisZeroMemory(pAdapter->CommonCfg.DesireRate, MAX_LEN_OF_SUPPORTED_RATES);
-                NdisMoveMemory(pAdapter->CommonCfg.DesireRate, &aryRates, sizeof(NDIS_802_11_RATES));
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_DESIRED_RATES (%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x)\n",
-                    pAdapter->CommonCfg.DesireRate[0],pAdapter->CommonCfg.DesireRate[1],
-                    pAdapter->CommonCfg.DesireRate[2],pAdapter->CommonCfg.DesireRate[3],
-                    pAdapter->CommonCfg.DesireRate[4],pAdapter->CommonCfg.DesireRate[5],
-                    pAdapter->CommonCfg.DesireRate[6],pAdapter->CommonCfg.DesireRate[7] ));
-                // Changing DesiredRate may affect the MAX TX rate we used to TX frames out
-                MlmeUpdateTxRates(pAdapter, FALSE, 0);
-            }
-            break;
-        case RT_OID_802_11_PREAMBLE:
-            if (wrq->u.data.length != sizeof(RT_802_11_PREAMBLE))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&Preamble, wrq->u.data.pointer, wrq->u.data.length);
-                if (Preamble == Rt802_11PreambleShort)
-                {
-                    pAdapter->CommonCfg.TxPreamble = Preamble;
-                    MlmeSetTxPreamble(pAdapter, Rt802_11PreambleShort);
-                }
-                else if ((Preamble == Rt802_11PreambleLong) || (Preamble == Rt802_11PreambleAuto))
-                {
-                    // if user wants AUTO, initialize to LONG here, then change according to AP's
-                    // capability upon association.
-                    pAdapter->CommonCfg.TxPreamble = Preamble;
-                    MlmeSetTxPreamble(pAdapter, Rt802_11PreambleLong);
-                }
-                else
-                {
-                    Status = -EINVAL;
-                    break;
-                }
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_PREAMBLE (=%d)\n", Preamble));
-            }
-            break;
-        case OID_802_11_WEP_STATUS:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_WEP_STATUS))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&WepStatus, wrq->u.data.pointer, wrq->u.data.length);
-                // Since TKIP, AES, WEP are all supported. It should not have any invalid setting
-                if (WepStatus <= Ndis802_11Encryption3KeyAbsent)
-                {
-                    if (pAdapter->StaCfg.WepStatus != WepStatus)
-                    {
-                        // Config has changed
-                        pAdapter->bConfigChanged = TRUE;
-                    }
-                    pAdapter->StaCfg.WepStatus     = WepStatus;
-                    pAdapter->StaCfg.OrigWepStatus = WepStatus;
-                    pAdapter->StaCfg.PairCipher    = WepStatus;
-                	pAdapter->StaCfg.GroupCipher   = WepStatus;
-                }
-                else
-                {
-                    Status  = -EINVAL;
-                    break;
-                }
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_WEP_STATUS (=%d)\n",WepStatus));
-            }
-            break;
-        case OID_802_11_AUTHENTICATION_MODE:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_AUTHENTICATION_MODE))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&AuthMode, wrq->u.data.pointer, wrq->u.data.length);
-                if (AuthMode > Ndis802_11AuthModeMax)
-                {
-                    Status  = -EINVAL;
-                    break;
-                }
-                else
-                {
-                    if (pAdapter->StaCfg.AuthMode != AuthMode)
-                    {
-                        // Config has changed
-                        pAdapter->bConfigChanged = TRUE;
-                    }
-                    pAdapter->StaCfg.AuthMode = AuthMode;
-                }
-                pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_AUTHENTICATION_MODE (=%d) \n",pAdapter->StaCfg.AuthMode));
-            }
-            break;
-        case OID_802_11_INFRASTRUCTURE_MODE:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_NETWORK_INFRASTRUCTURE))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&BssType, wrq->u.data.pointer, wrq->u.data.length);
-
-				if (BssType == Ndis802_11IBSS)
-					Set_NetworkType_Proc(pAdapter, "Adhoc");
-				else if (BssType == Ndis802_11Infrastructure)
-					Set_NetworkType_Proc(pAdapter, "Infra");
-				else if (BssType == Ndis802_11Monitor)
-					Set_NetworkType_Proc(pAdapter, "Monitor");
-				else
-				{
-					Status  = -EINVAL;
-					DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_INFRASTRUCTURE_MODE (unknown)\n"));
-				}
-			}
-			break;
-	 case OID_802_11_REMOVE_WEP:
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_WEP\n"));
-            if (wrq->u.data.length != sizeof(NDIS_802_11_KEY_INDEX))
-            {
-				Status = -EINVAL;
-            }
-            else
-            {
-				KeyIdx = *(NDIS_802_11_KEY_INDEX *) wrq->u.data.pointer;
-
-				if (KeyIdx & 0x80000000)
-				{
-					// Should never set default bit when remove key
-					Status = -EINVAL;
-				}
-				else
-				{
-					KeyIdx = KeyIdx & 0x0fffffff;
-					if (KeyIdx >= 4){
-						Status = -EINVAL;
-					}
-					else
-					{
-						pAdapter->SharedKey[BSS0][KeyIdx].KeyLen = 0;
-						pAdapter->SharedKey[BSS0][KeyIdx].CipherAlg = CIPHER_NONE;
-						AsicRemoveSharedKeyEntry(pAdapter, 0, (UCHAR)KeyIdx);
-					}
-				}
-            }
-            break;
-        case RT_OID_802_11_RESET_COUNTERS:
-            NdisZeroMemory(&pAdapter->WlanCounters, sizeof(COUNTER_802_11));
-            NdisZeroMemory(&pAdapter->Counters8023, sizeof(COUNTER_802_3));
-            NdisZeroMemory(&pAdapter->RalinkCounters, sizeof(COUNTER_RALINK));
-            pAdapter->Counters8023.RxNoBuffer   = 0;
-			pAdapter->Counters8023.GoodReceives = 0;
-			pAdapter->Counters8023.RxNoBuffer   = 0;
-#ifdef RT2870
-			pAdapter->BulkOutComplete	= 0;
-			pAdapter->BulkOutCompleteOther= 0;
-			pAdapter->BulkOutCompleteCancel = 0;
-			pAdapter->BulkOutReq = 0;
-			pAdapter->BulkInReq= 0;
-			pAdapter->BulkInComplete = 0;
-			pAdapter->BulkInCompleteFail = 0;
-#endif // RT2870 //
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_RESET_COUNTERS \n"));
-            break;
-        case OID_802_11_RTS_THRESHOLD:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_RTS_THRESHOLD))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&RtsThresh, wrq->u.data.pointer, wrq->u.data.length);
-                if (RtsThresh > MAX_RTS_THRESHOLD)
-                    Status  = -EINVAL;
-                else
-                    pAdapter->CommonCfg.RtsThreshold = (USHORT)RtsThresh;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_RTS_THRESHOLD (=%ld)\n",RtsThresh));
-            break;
-        case OID_802_11_FRAGMENTATION_THRESHOLD:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_FRAGMENTATION_THRESHOLD))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&FragThresh, wrq->u.data.pointer, wrq->u.data.length);
-                pAdapter->CommonCfg.bUseZeroToDisableFragment = FALSE;
-                if (FragThresh > MAX_FRAG_THRESHOLD || FragThresh < MIN_FRAG_THRESHOLD)
-                {
-                    if (FragThresh == 0)
-                    {
-                        pAdapter->CommonCfg.FragmentThreshold = MAX_FRAG_THRESHOLD;
-                        pAdapter->CommonCfg.bUseZeroToDisableFragment = TRUE;
-                    }
-                    else
-                        Status  = -EINVAL;
-                }
-                else
-                    pAdapter->CommonCfg.FragmentThreshold = (USHORT)FragThresh;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_FRAGMENTATION_THRESHOLD (=%ld) \n",FragThresh));
-            break;
-        case OID_802_11_POWER_MODE:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_POWER_MODE))
-                Status = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&PowerMode, wrq->u.data.pointer, wrq->u.data.length);
-                if (PowerMode == Ndis802_11PowerModeCAM)
-                	Set_PSMode_Proc(pAdapter, "CAM");
-                else if (PowerMode == Ndis802_11PowerModeMAX_PSP)
-                	Set_PSMode_Proc(pAdapter, "Max_PSP");
-                else if (PowerMode == Ndis802_11PowerModeFast_PSP)
-					Set_PSMode_Proc(pAdapter, "Fast_PSP");
-                else if (PowerMode == Ndis802_11PowerModeLegacy_PSP)
-					Set_PSMode_Proc(pAdapter, "Legacy_PSP");
-                else
-                    Status = -EINVAL;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_POWER_MODE (=%d)\n",PowerMode));
-            break;
-         case RT_OID_802_11_TX_POWER_LEVEL_1:
-			if (wrq->u.data.length  < sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&PowerTemp, wrq->u.data.pointer, wrq->u.data.length);
-				if (PowerTemp > 100)
-					PowerTemp = 0xffffffff;  // AUTO
-				pAdapter->CommonCfg.TxPowerDefault = PowerTemp; //keep current setting.
-					pAdapter->CommonCfg.TxPowerPercentage = pAdapter->CommonCfg.TxPowerDefault;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_TX_POWER_LEVEL_1 (=%ld)\n", pAdapter->CommonCfg.TxPowerPercentage));
-			}
-	        break;
-		case OID_802_11_NETWORK_TYPE_IN_USE:
-			if (wrq->u.data.length != sizeof(NDIS_802_11_NETWORK_TYPE))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&NetType, wrq->u.data.pointer, wrq->u.data.length);
-
-				if (NetType == Ndis802_11DS)
-					RTMPSetPhyMode(pAdapter, PHY_11B);
-				else if (NetType == Ndis802_11OFDM24)
-					RTMPSetPhyMode(pAdapter, PHY_11BG_MIXED);
-				else if (NetType == Ndis802_11OFDM5)
-					RTMPSetPhyMode(pAdapter, PHY_11A);
-				else
-					Status = -EINVAL;
-#ifdef DOT11_N_SUPPORT
-				if (Status == NDIS_STATUS_SUCCESS)
-					SetCommonHT(pAdapter);
-#endif // DOT11_N_SUPPORT //
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_NETWORK_TYPE_IN_USE (=%d)\n",NetType));
-		    }
-			break;
-        // For WPA PSK PMK key
-        case RT_OID_802_11_ADD_WPA:
-            pKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-            if(pKey == NULL)
-            {
-                Status = -ENOMEM;
-                break;
-            }
-
-            Status = copy_from_user(pKey, wrq->u.data.pointer, wrq->u.data.length);
-            if (pKey->Length != wrq->u.data.length)
-            {
-                Status  = -EINVAL;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_WPA, Failed!!\n"));
-            }
-            else
-            {
-                if ((pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPAPSK) &&
-				    (pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPA2PSK) &&
-				    (pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPANone) )
-                {
-                    Status = -EOPNOTSUPP;
-                    DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_WPA, Failed!! [AuthMode != WPAPSK/WPA2PSK/WPANONE]\n"));
-                }
-                else if ((pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
-						 (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK) ||
-						 (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPANone) )     // Only for WPA PSK mode
-				{
-                    NdisMoveMemory(pAdapter->StaCfg.PMK, &pKey->KeyMaterial, pKey->KeyLength);
-                    // Use RaConfig as PSK agent.
-                    // Start STA supplicant state machine
-                    if (pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPANone)
-                        pAdapter->StaCfg.WpaState = SS_START;
-
-                    DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_WPA (id=0x%x, Len=%d-byte)\n", pKey->KeyIndex, pKey->KeyLength));
-                }
-                else
-                {
-                    pAdapter->StaCfg.WpaState = SS_NOTUSE;
-                    DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_WPA (id=0x%x, Len=%d-byte)\n", pKey->KeyIndex, pKey->KeyLength));
-                }
-            }
-            kfree(pKey);
-            break;
-        case OID_802_11_REMOVE_KEY:
-            pRemoveKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-            if(pRemoveKey == NULL)
-            {
-                Status = -ENOMEM;
-                break;
-            }
-
-            Status = copy_from_user(pRemoveKey, wrq->u.data.pointer, wrq->u.data.length);
-            if (pRemoveKey->Length != wrq->u.data.length)
-            {
-                Status  = -EINVAL;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY, Failed!!\n"));
-            }
-            else
-            {
-                if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-                {
-                    RTMPWPARemoveKeyProc(pAdapter, pRemoveKey);
-                    DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY, Remove WPA Key!!\n"));
-                }
-                else
-                {
-                    KeyIdx = pRemoveKey->KeyIndex;
-
-                    if (KeyIdx & 0x80000000)
-                    {
-                        // Should never set default bit when remove key
-                        Status  = -EINVAL;
-                        DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY, Failed!!(Should never set default bit when remove key)\n"));
-                    }
-                    else
-                    {
-                        KeyIdx = KeyIdx & 0x0fffffff;
-                        if (KeyIdx > 3)
-                        {
-                            Status  = -EINVAL;
-                            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY, Failed!!(KeyId[%d] out of range)\n", KeyIdx));
-                        }
-                        else
-                        {
-                            pAdapter->SharedKey[BSS0][KeyIdx].KeyLen = 0;
-                            pAdapter->SharedKey[BSS0][KeyIdx].CipherAlg = CIPHER_NONE;
-                            AsicRemoveSharedKeyEntry(pAdapter, 0, (UCHAR)KeyIdx);
-                            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY (id=0x%x, Len=%d-byte)\n", pRemoveKey->KeyIndex, pRemoveKey->Length));
-                        }
-                    }
-                }
-            }
-            kfree(pRemoveKey);
-            break;
-        // New for WPA
-        case OID_802_11_ADD_KEY:
-            pKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-            if(pKey == NULL)
-            {
-                Status = -ENOMEM;
-                break;
-            }
-            Status = copy_from_user(pKey, wrq->u.data.pointer, wrq->u.data.length);
-            if (pKey->Length != wrq->u.data.length)
-            {
-                Status  = -EINVAL;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_KEY, Failed!!\n"));
-            }
-            else
-            {
-                RTMPAddKey(pAdapter, pKey);
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_KEY (id=0x%x, Len=%d-byte)\n", pKey->KeyIndex, pKey->KeyLength));
-            }
-            kfree(pKey);
-            break;
-        case OID_802_11_CONFIGURATION:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_CONFIGURATION))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&Config, wrq->u.data.pointer, wrq->u.data.length);
-                pConfig = &Config;
-
-                if ((pConfig->BeaconPeriod >= 20) && (pConfig->BeaconPeriod <=400))
-                     pAdapter->CommonCfg.BeaconPeriod = (USHORT) pConfig->BeaconPeriod;
-
-                pAdapter->StaActive.AtimWin = (USHORT) pConfig->ATIMWindow;
-                MAP_KHZ_TO_CHANNEL_ID(pConfig->DSConfig, pAdapter->CommonCfg.Channel);
-                //
-				// Save the channel on MlmeAux for CntlOidRTBssidProc used.
-				//
-				pAdapter->MlmeAux.Channel = pAdapter->CommonCfg.Channel;
-
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_CONFIGURATION (BeacnPeriod=%ld,AtimW=%ld,Ch=%d)\n",
-                    pConfig->BeaconPeriod, pConfig->ATIMWindow, pAdapter->CommonCfg.Channel));
-                // Config has changed
-                pAdapter->bConfigChanged = TRUE;
-            }
-            break;
-#ifdef DOT11_N_SUPPORT
-		case RT_OID_802_11_SET_HT_PHYMODE:
-			if (wrq->u.data.length	!= sizeof(OID_SET_HT_PHYMODE))
-				Status = -EINVAL;
-			else
-			{
-			    POID_SET_HT_PHYMODE	pHTPhyMode = &HT_PhyMode;
-
-				Status = copy_from_user(&HT_PhyMode, wrq->u.data.pointer, wrq->u.data.length);
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::pHTPhyMode	(PhyMode = %d,TransmitNo = %d, HtMode =	%d,	ExtOffset =	%d , MCS = %d, BW =	%d,	STBC = %d, SHORTGI = %d) \n",
-				pHTPhyMode->PhyMode, pHTPhyMode->TransmitNo,pHTPhyMode->HtMode,pHTPhyMode->ExtOffset,
-				pHTPhyMode->MCS, pHTPhyMode->BW, pHTPhyMode->STBC,	pHTPhyMode->SHORTGI));
-				if (pAdapter->CommonCfg.PhyMode	>= PHY_11ABGN_MIXED)
-					RTMPSetHT(pAdapter,	pHTPhyMode);
-			}
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_HT_PHYMODE(MCS=%d,BW=%d,SGI=%d,STBC=%d)\n",
-				pAdapter->StaCfg.HTPhyMode.field.MCS, pAdapter->StaCfg.HTPhyMode.field.BW, pAdapter->StaCfg.HTPhyMode.field.ShortGI,
-				pAdapter->StaCfg.HTPhyMode.field.STBC));
-			break;
-#endif // DOT11_N_SUPPORT //
-		case RT_OID_802_11_SET_APSD_SETTING:
-			if (wrq->u.data.length != sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				ULONG apsd ;
-				Status = copy_from_user(&apsd, wrq->u.data.pointer,	wrq->u.data.length);
-
-				/*-------------------------------------------------------------------
-				|B31~B7	|	B6~B5	 |	 B4	 |	 B3	 |	B2	 |	B1	 |	   B0		|
-				---------------------------------------------------------------------
-				| Rsvd	| Max SP Len | AC_VO | AC_VI | AC_BK | AC_BE | APSD	Capable	|
-				---------------------------------------------------------------------*/
-				pAdapter->CommonCfg.bAPSDCapable = (apsd & 0x00000001) ? TRUE :	FALSE;
-				pAdapter->CommonCfg.bAPSDAC_BE = ((apsd	& 0x00000002) >> 1)	? TRUE : FALSE;
-				pAdapter->CommonCfg.bAPSDAC_BK = ((apsd	& 0x00000004) >> 2)	? TRUE : FALSE;
-				pAdapter->CommonCfg.bAPSDAC_VI = ((apsd	& 0x00000008) >> 3)	? TRUE : FALSE;
-				pAdapter->CommonCfg.bAPSDAC_VO = ((apsd	& 0x00000010) >> 4)	? TRUE : FALSE;
-				pAdapter->CommonCfg.MaxSPLength	= (UCHAR)((apsd	& 0x00000060) >> 5);
-
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_APSD_SETTING (apsd=0x%lx, APSDCap=%d, [BE,BK,VI,VO]=[%d/%d/%d/%d],	MaxSPLen=%d)\n", apsd, pAdapter->CommonCfg.bAPSDCapable,
-					pAdapter->CommonCfg.bAPSDAC_BE,	pAdapter->CommonCfg.bAPSDAC_BK,	pAdapter->CommonCfg.bAPSDAC_VI,	pAdapter->CommonCfg.bAPSDAC_VO,	pAdapter->CommonCfg.MaxSPLength));
-			}
-			break;
-
-		case RT_OID_802_11_SET_APSD_PSM:
-			if (wrq->u.data.length	!= sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				// Driver needs	to notify AP when PSM changes
-				Status = copy_from_user(&pAdapter->CommonCfg.bAPSDForcePowerSave, wrq->u.data.pointer, wrq->u.data.length);
-				if (pAdapter->CommonCfg.bAPSDForcePowerSave	!= pAdapter->StaCfg.Psm)
-				{
-					MlmeSetPsmBit(pAdapter,	pAdapter->CommonCfg.bAPSDForcePowerSave);
-					RTMPSendNullFrame(pAdapter,	pAdapter->CommonCfg.TxRate,	TRUE);
-				}
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_APSD_PSM (bAPSDForcePowerSave:%d)\n",	pAdapter->CommonCfg.bAPSDForcePowerSave));
-			}
-			break;
-#ifdef QOS_DLS_SUPPORT
-		case RT_OID_802_11_SET_DLS:
-			if (wrq->u.data.length != sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				BOOLEAN	oldvalue = pAdapter->CommonCfg.bDLSCapable;
-				Status = copy_from_user(&pAdapter->CommonCfg.bDLSCapable, wrq->u.data.pointer, wrq->u.data.length);
-				if (oldvalue &&	!pAdapter->CommonCfg.bDLSCapable)
-				{
-					int	i;
-					// tear	down local dls table entry
-					for	(i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
-					{
-						if (pAdapter->StaCfg.DLSEntry[i].Valid && (pAdapter->StaCfg.DLSEntry[i].Status == DLS_FINISH))
-						{
-							pAdapter->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-							pAdapter->StaCfg.DLSEntry[i].Valid	= FALSE;
-							RTMPSendDLSTearDownFrame(pAdapter, pAdapter->StaCfg.DLSEntry[i].MacAddr);
-						}
-					}
-
-					// tear	down peer dls table	entry
-					for	(i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
-					{
-						if (pAdapter->StaCfg.DLSEntry[i].Valid && (pAdapter->StaCfg.DLSEntry[i].Status == DLS_FINISH))
-						{
-							pAdapter->StaCfg.DLSEntry[i].Status	= DLS_NONE;
-							pAdapter->StaCfg.DLSEntry[i].Valid	= FALSE;
-							RTMPSendDLSTearDownFrame(pAdapter, pAdapter->StaCfg.DLSEntry[i].MacAddr);
-						}
-					}
-				}
-
-				DBGPRINT(RT_DEBUG_TRACE,("Set::RT_OID_802_11_SET_DLS (=%d)\n", pAdapter->CommonCfg.bDLSCapable));
-			}
-			break;
-
-		case RT_OID_802_11_SET_DLS_PARAM:
-			if (wrq->u.data.length	!= sizeof(RT_802_11_DLS_UI))
-				Status = -EINVAL;
-			else
-			{
-				RT_802_11_DLS	Dls;
-
-				NdisZeroMemory(&Dls, sizeof(RT_802_11_DLS));
-				RTMPMoveMemory(&Dls, wrq->u.data.pointer, sizeof(RT_802_11_DLS_UI));
-				MlmeEnqueue(pAdapter,
-							MLME_CNTL_STATE_MACHINE,
-							RT_OID_802_11_SET_DLS_PARAM,
-							sizeof(RT_802_11_DLS),
-							&Dls);
-				DBGPRINT(RT_DEBUG_TRACE,("Set::RT_OID_802_11_SET_DLS_PARAM \n"));
-			}
-			break;
-#endif // QOS_DLS_SUPPORT //
-		case RT_OID_802_11_SET_WMM:
-			if (wrq->u.data.length	!= sizeof(BOOLEAN))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&pAdapter->CommonCfg.bWmmCapable, wrq->u.data.pointer, wrq->u.data.length);
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_WMM (=%d)	\n", pAdapter->CommonCfg.bWmmCapable));
-			}
-			break;
-
-		case OID_802_11_DISASSOCIATE:
-#ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				break;
-			}
-#endif // RALINK_ATE //
-			//
-			// Set NdisRadioStateOff to	TRUE, instead of called	MlmeRadioOff.
-			// Later on, NDIS_802_11_BSSID_LIST_EX->NumberOfItems should be	0
-			// when	query OID_802_11_BSSID_LIST.
-			//
-			// TRUE:  NumberOfItems	will set to	0.
-			// FALSE: NumberOfItems	no change.
-			//
-			pAdapter->CommonCfg.NdisRadioStateOff =	TRUE;
-			// Set to immediately send the media disconnect	event
-			pAdapter->MlmeAux.CurrReqIsFromNdis	= TRUE;
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_DISASSOCIATE	\n"));
-
-			if (INFRA_ON(pAdapter))
-			{
-				if (pAdapter->Mlme.CntlMachine.CurrState !=	CNTL_IDLE)
-				{
-					RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-					DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME	busy, reset	MLME state machine !!!\n"));
-				}
-
-				MlmeEnqueue(pAdapter,
-					MLME_CNTL_STATE_MACHINE,
-					OID_802_11_DISASSOCIATE,
-					0,
-					NULL);
-
-				StateMachineTouched	= TRUE;
-			}
-			break;
-
-#ifdef DOT11_N_SUPPORT
-		case RT_OID_802_11_SET_IMME_BA_CAP:
-				if (wrq->u.data.length != sizeof(OID_BACAP_STRUC))
-					Status = -EINVAL;
-				else
-				{
-					OID_BACAP_STRUC Orde ;
-					Status = copy_from_user(&Orde, wrq->u.data.pointer, wrq->u.data.length);
-					if (Orde.Policy > BA_NOTUSE)
-					{
-						Status = NDIS_STATUS_INVALID_DATA;
-					}
-					else if (Orde.Policy == BA_NOTUSE)
-					{
-						pAdapter->CommonCfg.BACapability.field.Policy = BA_NOTUSE;
-						pAdapter->CommonCfg.BACapability.field.MpduDensity = Orde.MpduDensity;
-						pAdapter->CommonCfg.DesiredHtPhy.MpduDensity = Orde.MpduDensity;
-						pAdapter->CommonCfg.DesiredHtPhy.AmsduEnable = Orde.AmsduEnable;
-						pAdapter->CommonCfg.DesiredHtPhy.AmsduSize= Orde.AmsduSize;
-						pAdapter->CommonCfg.DesiredHtPhy.MimoPs= Orde.MMPSmode;
-						pAdapter->CommonCfg.BACapability.field.MMPSmode = Orde.MMPSmode;
-						// UPdata to HT IE
-						pAdapter->CommonCfg.HtCapability.HtCapInfo.MimoPs = Orde.MMPSmode;
-						pAdapter->CommonCfg.HtCapability.HtCapInfo.AMsduSize = Orde.AmsduSize;
-						pAdapter->CommonCfg.HtCapability.HtCapParm.MpduDensity = Orde.MpduDensity;
-					}
-					else
-					{
-                        pAdapter->CommonCfg.BACapability.field.AutoBA = Orde.AutoBA;
-						pAdapter->CommonCfg.BACapability.field.Policy = IMMED_BA; // we only support immediate BA.
-						pAdapter->CommonCfg.BACapability.field.MpduDensity = Orde.MpduDensity;
-						pAdapter->CommonCfg.DesiredHtPhy.MpduDensity = Orde.MpduDensity;
-						pAdapter->CommonCfg.DesiredHtPhy.AmsduEnable = Orde.AmsduEnable;
-						pAdapter->CommonCfg.DesiredHtPhy.AmsduSize= Orde.AmsduSize;
-						pAdapter->CommonCfg.DesiredHtPhy.MimoPs = Orde.MMPSmode;
-						pAdapter->CommonCfg.BACapability.field.MMPSmode = Orde.MMPSmode;
-
-						// UPdata to HT IE
-						pAdapter->CommonCfg.HtCapability.HtCapInfo.MimoPs = Orde.MMPSmode;
-						pAdapter->CommonCfg.HtCapability.HtCapInfo.AMsduSize = Orde.AmsduSize;
-						pAdapter->CommonCfg.HtCapability.HtCapParm.MpduDensity = Orde.MpduDensity;
-
-						if (pAdapter->CommonCfg.BACapability.field.RxBAWinLimit > MAX_RX_REORDERBUF)
-							pAdapter->CommonCfg.BACapability.field.RxBAWinLimit = MAX_RX_REORDERBUF;
-
-					}
-
-					pAdapter->CommonCfg.REGBACapability.word = pAdapter->CommonCfg.BACapability.word;
-					DBGPRINT(RT_DEBUG_TRACE, ("Set::(Orde.AutoBA = %d) (Policy=%d)(ReBAWinLimit=%d)(TxBAWinLimit=%d)(AutoMode=%d)\n",Orde.AutoBA, pAdapter->CommonCfg.BACapability.field.Policy,
-						pAdapter->CommonCfg.BACapability.field.RxBAWinLimit,pAdapter->CommonCfg.BACapability.field.TxBAWinLimit, pAdapter->CommonCfg.BACapability.field.AutoBA));
-					DBGPRINT(RT_DEBUG_TRACE, ("Set::(MimoPs = %d)(AmsduEnable = %d) (AmsduSize=%d)(MpduDensity=%d)\n",pAdapter->CommonCfg.DesiredHtPhy.MimoPs, pAdapter->CommonCfg.DesiredHtPhy.AmsduEnable,
-						pAdapter->CommonCfg.DesiredHtPhy.AmsduSize, pAdapter->CommonCfg.DesiredHtPhy.MpduDensity));
-				}
-
-				break;
-		case RT_OID_802_11_ADD_IMME_BA:
-			DBGPRINT(RT_DEBUG_TRACE, (" Set :: RT_OID_802_11_ADD_IMME_BA \n"));
-			if (wrq->u.data.length != sizeof(OID_ADD_BA_ENTRY))
-					Status = -EINVAL;
-			else
-			{
-				UCHAR		        index;
-				OID_ADD_BA_ENTRY    BA;
-				MAC_TABLE_ENTRY     *pEntry;
-
-				Status = copy_from_user(&BA, wrq->u.data.pointer, wrq->u.data.length);
-				if (BA.TID > 15)
-				{
-					Status = NDIS_STATUS_INVALID_DATA;
-					break;
-				}
-				else
-				{
-					//BATableInsertEntry
-					//As ad-hoc mode, BA pair is not limited to only BSSID. so add via OID.
-					index = BA.TID;
-					// in ad hoc mode, when adding BA pair, we should insert this entry into MACEntry too
-					pEntry = MacTableLookup(pAdapter, BA.MACAddr);
-					if (!pEntry)
-					{
-						DBGPRINT(RT_DEBUG_TRACE, ("RT_OID_802_11_ADD_IMME_BA. break on no connection.----:%x:%x\n", BA.MACAddr[4], BA.MACAddr[5]));
-						break;
-					}
-					if (BA.IsRecipient == FALSE)
-					{
-					    if (pEntry->bIAmBadAtheros == TRUE)
-							pAdapter->CommonCfg.BACapability.field.RxBAWinLimit = 0x10;
-
-						BAOriSessionSetUp(pAdapter, pEntry, index, 0, 100, TRUE);
-					}
-					else
-					{
-						//BATableInsertEntry(pAdapter, pEntry->Aid, BA.MACAddr, 0, 0xffff, BA.TID, BA.nMSDU, BA.IsRecipient);
-					}
-
-					DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_IMME_BA. Rec = %d. Mac = %x:%x:%x:%x:%x:%x . \n",
-						BA.IsRecipient, BA.MACAddr[0], BA.MACAddr[1], BA.MACAddr[2], BA.MACAddr[2]
-						, BA.MACAddr[4], BA.MACAddr[5]));
-				}
-			}
-			break;
-
-		case RT_OID_802_11_TEAR_IMME_BA:
-			DBGPRINT(RT_DEBUG_TRACE, ("Set :: RT_OID_802_11_TEAR_IMME_BA \n"));
-			if (wrq->u.data.length != sizeof(OID_ADD_BA_ENTRY))
-					Status = -EINVAL;
-			else
-			{
-				POID_ADD_BA_ENTRY	pBA;
-				MAC_TABLE_ENTRY *pEntry;
-
-				pBA = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-
-				if (pBA == NULL)
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("Set :: RT_OID_802_11_TEAR_IMME_BA kmalloc() can't allocate enough memory\n"));
-					Status = NDIS_STATUS_FAILURE;
-				}
-				else
-				{
-					Status = copy_from_user(pBA, wrq->u.data.pointer, wrq->u.data.length);
-					DBGPRINT(RT_DEBUG_TRACE, ("Set :: RT_OID_802_11_TEAR_IMME_BA(TID=%d, bAllTid=%d)\n", pBA->TID, pBA->bAllTid));
-
-					if (!pBA->bAllTid && (pBA->TID > NUM_OF_TID))
-					{
-						Status = NDIS_STATUS_INVALID_DATA;
-						break;
-					}
-
-					if (pBA->IsRecipient == FALSE)
-					{
-						pEntry = MacTableLookup(pAdapter, pBA->MACAddr);
-						DBGPRINT(RT_DEBUG_TRACE, (" pBA->IsRecipient == FALSE\n"));
-						if (pEntry)
-						{
-							DBGPRINT(RT_DEBUG_TRACE, (" pBA->pEntry\n"));
-							BAOriSessionTearDown(pAdapter, pEntry->Aid, pBA->TID, FALSE, TRUE);
-						}
-						else
-							DBGPRINT(RT_DEBUG_TRACE, ("Set :: Not found pEntry \n"));
-					}
-					else
-					{
-						pEntry = MacTableLookup(pAdapter, pBA->MACAddr);
-						if (pEntry)
-						{
-							BARecSessionTearDown( pAdapter, (UCHAR)pEntry->Aid, pBA->TID, TRUE);
-						}
-						else
-							DBGPRINT(RT_DEBUG_TRACE, ("Set :: Not found pEntry \n"));
-					}
-					kfree(pBA);
-				}
-            }
-            break;
-#endif // DOT11_N_SUPPORT //
-
-        // For WPA_SUPPLICANT to set static wep key
-    	case OID_802_11_ADD_WEP:
-    	    pWepKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-
-    	    if(pWepKey == NULL)
-            {
-                Status = -ENOMEM;
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP, Failed!!\n"));
-                break;
-            }
-            Status = copy_from_user(pWepKey, wrq->u.data.pointer, wrq->u.data.length);
-            if (Status)
-            {
-                Status  = -EINVAL;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP, Failed (length mismatch)!!\n"));
-            }
-            else
-            {
-		        KeyIdx = pWepKey->KeyIndex & 0x0fffffff;
-                // KeyIdx must be 0 ~ 3
-                if (KeyIdx > 4)
-    			{
-                    Status  = -EINVAL;
-                    DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP, Failed (KeyIdx must be smaller than 4)!!\n"));
-                }
-                else
-                {
-                    UCHAR CipherAlg = 0;
-                    PUCHAR Key;
-
-                    // set key material and key length
-                    NdisZeroMemory(pAdapter->SharedKey[BSS0][KeyIdx].Key, 16);
-                    pAdapter->SharedKey[BSS0][KeyIdx].KeyLen = (UCHAR) pWepKey->KeyLength;
-                    NdisMoveMemory(pAdapter->SharedKey[BSS0][KeyIdx].Key, &pWepKey->KeyMaterial, pWepKey->KeyLength);
-
-                    switch(pWepKey->KeyLength)
-                    {
-                        case 5:
-                            CipherAlg = CIPHER_WEP64;
-                            break;
-                        case 13:
-                            CipherAlg = CIPHER_WEP128;
-                            break;
-                        default:
-                            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP, only support CIPHER_WEP64(len:5) & CIPHER_WEP128(len:13)!!\n"));
-                            Status = -EINVAL;
-                            break;
-                    }
-                    pAdapter->SharedKey[BSS0][KeyIdx].CipherAlg = CipherAlg;
-
-                    // Default key for tx (shared key)
-                    if (pWepKey->KeyIndex & 0x80000000)
-                    {
-#ifdef WPA_SUPPLICANT_SUPPORT
-                        // set key material and key length
-                        NdisZeroMemory(pAdapter->StaCfg.DesireSharedKey[KeyIdx].Key, 16);
-                        pAdapter->StaCfg.DesireSharedKey[KeyIdx].KeyLen = (UCHAR) pWepKey->KeyLength;
-                        NdisMoveMemory(pAdapter->StaCfg.DesireSharedKey[KeyIdx].Key, &pWepKey->KeyMaterial, pWepKey->KeyLength);
-                        pAdapter->StaCfg.DesireSharedKeyId = KeyIdx;
-                        pAdapter->StaCfg.DesireSharedKey[KeyIdx].CipherAlg = CipherAlg;
-#endif // WPA_SUPPLICANT_SUPPORT //
-                        pAdapter->StaCfg.DefaultKeyId = (UCHAR) KeyIdx;
-                    }
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-                    if (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED)
-#endif // WPA_SUPPLICANT_SUPPORT
-                    {
-                        Key = pAdapter->SharedKey[BSS0][KeyIdx].Key;
-
-                        // Set key material and cipherAlg to Asic
-        				AsicAddSharedKeyEntry(pAdapter, BSS0, KeyIdx, CipherAlg, Key, NULL, NULL);
-
-                        if (pWepKey->KeyIndex & 0x80000000)
-                        {
-                            PMAC_TABLE_ENTRY pEntry = &pAdapter->MacTab.Content[BSSID_WCID];
-                            // Assign group key info
-    						RTMPAddWcidAttributeEntry(pAdapter, BSS0, KeyIdx, CipherAlg, NULL);
-    						// Assign pairwise key info
-    						RTMPAddWcidAttributeEntry(pAdapter, BSS0, KeyIdx, CipherAlg, pEntry);
-                        }
-                    }
-					DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP (id=0x%x, Len=%d-byte), %s\n", pWepKey->KeyIndex, pWepKey->KeyLength, (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED) ? "Port Secured":"Port NOT Secured"));
-				}
-            }
-            kfree(pWepKey);
-            break;
-#ifdef WPA_SUPPLICANT_SUPPORT
-	    case OID_SET_COUNTERMEASURES:
-            if (wrq->u.data.length != sizeof(int))
-                Status  = -EINVAL;
-            else
-            {
-                int enabled = 0;
-                Status = copy_from_user(&enabled, wrq->u.data.pointer, wrq->u.data.length);
-                if (enabled == 1)
-                    pAdapter->StaCfg.bBlockAssoc = TRUE;
-                else
-                    // WPA MIC error should block association attempt for 60 seconds
-                    pAdapter->StaCfg.bBlockAssoc = FALSE;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_SET_COUNTERMEASURES bBlockAssoc=%s\n", pAdapter->StaCfg.bBlockAssoc ? "TRUE":"FALSE"));
-            }
-	        break;
-        case RT_OID_WPA_SUPPLICANT_SUPPORT:
-			if (wrq->u.data.length != sizeof(UCHAR))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&wpa_supplicant_enable, wrq->u.data.pointer, wrq->u.data.length);
-    			pAdapter->StaCfg.WpaSupplicantUP = wpa_supplicant_enable;
-    			DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_WPA_SUPPLICANT_SUPPORT (=%d)\n", pAdapter->StaCfg.WpaSupplicantUP));
-			}
-            break;
-        case OID_802_11_DEAUTHENTICATION:
-            if (wrq->u.data.length != sizeof(MLME_DEAUTH_REQ_STRUCT))
-                Status  = -EINVAL;
-            else
-            {
-                MLME_DEAUTH_REQ_STRUCT      *pInfo;
-				MLME_QUEUE_ELEM *MsgElem = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);
-
-                pInfo = (MLME_DEAUTH_REQ_STRUCT *) MsgElem->Msg;
-                Status = copy_from_user(pInfo, wrq->u.data.pointer, wrq->u.data.length);
-                MlmeDeauthReqAction(pAdapter, MsgElem);
-				kfree(MsgElem);
-
-                if (INFRA_ON(pAdapter))
-                {
-                    LinkDown(pAdapter, FALSE);
-                    pAdapter->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-                }
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_DEAUTHENTICATION (Reason=%d)\n", pInfo->Reason));
-            }
-            break;
-        case OID_802_11_DROP_UNENCRYPTED:
-            if (wrq->u.data.length != sizeof(int))
-                Status  = -EINVAL;
-            else
-            {
-                int enabled = 0;
-                Status = copy_from_user(&enabled, wrq->u.data.pointer, wrq->u.data.length);
-                if (enabled == 1)
-                    pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-                else
-                    pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-				NdisAcquireSpinLock(&pAdapter->MacTabLock);
-				pAdapter->MacTab.Content[BSSID_WCID].PortSecured = pAdapter->StaCfg.PortSecured;
-				NdisReleaseSpinLock(&pAdapter->MacTabLock);
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_DROP_UNENCRYPTED (=%d)\n", enabled));
-            }
-            break;
-        case OID_802_11_SET_IEEE8021X:
-            if (wrq->u.data.length != sizeof(BOOLEAN))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&IEEE8021xState, wrq->u.data.pointer, wrq->u.data.length);
-		        pAdapter->StaCfg.IEEE8021X = IEEE8021xState;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_SET_IEEE8021X (=%d)\n", IEEE8021xState));
-            }
-            break;
-        case OID_802_11_SET_IEEE8021X_REQUIRE_KEY:
-			if (wrq->u.data.length != sizeof(BOOLEAN))
-				 Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&IEEE8021x_required_keys, wrq->u.data.pointer, wrq->u.data.length);
-				pAdapter->StaCfg.IEEE8021x_required_keys = IEEE8021x_required_keys;
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_SET_IEEE8021X_REQUIRE_KEY (%d)\n", IEEE8021x_required_keys));
-			}
-			break;
-        case OID_802_11_PMKID:
-	        pPmkId = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-
-	        if(pPmkId == NULL) {
-                Status = -ENOMEM;
-                break;
-            }
-            Status = copy_from_user(pPmkId, wrq->u.data.pointer, wrq->u.data.length);
-
-	        // check the PMKID information
-	        if (pPmkId->BSSIDInfoCount == 0)
-                NdisZeroMemory(pAdapter->StaCfg.SavedPMK, sizeof(BSSID_INFO)*PMKID_NO);
-	        else
-	        {
-		        PBSSID_INFO	pBssIdInfo;
-		        UINT		BssIdx;
-		        UINT		CachedIdx;
-
-		        for (BssIdx = 0; BssIdx < pPmkId->BSSIDInfoCount; BssIdx++)
-		        {
-			        // point to the indexed BSSID_INFO structure
-			        pBssIdInfo = (PBSSID_INFO) ((PUCHAR) pPmkId + 2 * sizeof(UINT) + BssIdx * sizeof(BSSID_INFO));
-			        // Find the entry in the saved data base.
-			        for (CachedIdx = 0; CachedIdx < pAdapter->StaCfg.SavedPMKNum; CachedIdx++)
-			        {
-				        // compare the BSSID
-				        if (NdisEqualMemory(pBssIdInfo->BSSID, pAdapter->StaCfg.SavedPMK[CachedIdx].BSSID, sizeof(NDIS_802_11_MAC_ADDRESS)))
-					        break;
-			        }
-
-			        // Found, replace it
-			        if (CachedIdx < PMKID_NO)
-			        {
-				        DBGPRINT(RT_DEBUG_OFF, ("Update OID_802_11_PMKID, idx = %d\n", CachedIdx));
-				        NdisMoveMemory(&pAdapter->StaCfg.SavedPMK[CachedIdx], pBssIdInfo, sizeof(BSSID_INFO));
-				        pAdapter->StaCfg.SavedPMKNum++;
-			        }
-			        // Not found, replace the last one
-			        else
-			        {
-				        // Randomly replace one
-				        CachedIdx = (pBssIdInfo->BSSID[5] % PMKID_NO);
-				        DBGPRINT(RT_DEBUG_OFF, ("Update OID_802_11_PMKID, idx = %d\n", CachedIdx));
-				        NdisMoveMemory(&pAdapter->StaCfg.SavedPMK[CachedIdx], pBssIdInfo, sizeof(BSSID_INFO));
-			        }
-		        }
-			}
-			if(pPmkId)
-				kfree(pPmkId);
-	        break;
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-
-
-#ifdef SNMP_SUPPORT
-		case OID_802_11_SHORTRETRYLIMIT:
-			if (wrq->u.data.length != sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&ShortRetryLimit, wrq->u.data.pointer, wrq->u.data.length);
-				RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
-				tx_rty_cfg.field.ShortRtyLimit = ShortRetryLimit;
-				RTMP_IO_WRITE32(pAdapter, TX_RTY_CFG, tx_rty_cfg.word);
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_SHORTRETRYLIMIT (tx_rty_cfg.field.ShortRetryLimit=%d, ShortRetryLimit=%ld)\n", tx_rty_cfg.field.ShortRtyLimit, ShortRetryLimit));
-			}
-			break;
-
-		case OID_802_11_LONGRETRYLIMIT:
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_LONGRETRYLIMIT \n"));
-			if (wrq->u.data.length != sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&LongRetryLimit, wrq->u.data.pointer, wrq->u.data.length);
-				RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
-				tx_rty_cfg.field.LongRtyLimit = LongRetryLimit;
-				RTMP_IO_WRITE32(pAdapter, TX_RTY_CFG, tx_rty_cfg.word);
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_LONGRETRYLIMIT (tx_rty_cfg.field.LongRetryLimit= %d,LongRetryLimit=%ld)\n", tx_rty_cfg.field.LongRtyLimit, LongRetryLimit));
-			}
-			break;
-
-		case OID_802_11_WEPDEFAULTKEYVALUE:
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_WEPDEFAULTKEYVALUE\n"));
-			pKey = kmalloc(wrq->u.data.length, GFP_KERNEL);
-			Status = copy_from_user(pKey, wrq->u.data.pointer, wrq->u.data.length);
-			//pKey = &WepKey;
-
-			if ( pKey->Length != wrq->u.data.length)
-			{
-				Status = -EINVAL;
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_WEPDEFAULTKEYVALUE, Failed!!\n"));
-			}
-			KeyIdx = pKey->KeyIndex & 0x0fffffff;
-			DBGPRINT(RT_DEBUG_TRACE,("pKey->KeyIndex =%d, pKey->KeyLength=%d\n", pKey->KeyIndex, pKey->KeyLength));
-
-			// it is a shared key
-			if (KeyIdx > 4)
-				Status = -EINVAL;
-			else
-			{
-				pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen = (UCHAR) pKey->KeyLength;
-				NdisMoveMemory(&pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].Key, &pKey->KeyMaterial, pKey->KeyLength);
-				if (pKey->KeyIndex & 0x80000000)
-				{
-					// Default key for tx (shared key)
-					pAdapter->StaCfg.DefaultKeyId = (UCHAR) KeyIdx;
-				}
-				//RestartAPIsRequired = TRUE;
-			}
-			break;
-
-
-		case OID_802_11_WEPDEFAULTKEYID:
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_WEPDEFAULTKEYID \n"));
-
-			if (wrq->u.data.length != sizeof(UCHAR))
-				Status = -EINVAL;
-			else
-				Status = copy_from_user(&pAdapter->StaCfg.DefaultKeyId, wrq->u.data.pointer, wrq->u.data.length);
-
-			break;
-
-
-		case OID_802_11_CURRENTCHANNEL:
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_CURRENTCHANNEL \n"));
-			if (wrq->u.data.length != sizeof(UCHAR))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&ctmp, wrq->u.data.pointer, wrq->u.data.length);
-				sprintf(&ctmp,"%d", ctmp);
-				Set_Channel_Proc(pAdapter, &ctmp);
-			}
-			break;
-#endif
-
-
-
-        default:
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::unknown IOCTL's subcmd = 0x%08x\n", cmd));
-            Status = -EOPNOTSUPP;
-            break;
-    }
-
-
-    return Status;
-}
-
-INT RTMPQueryInformation(
-    IN  PRTMP_ADAPTER pAdapter,
-    IN  OUT struct ifreq    *rq,
-    IN  INT                 cmd)
-{
-    struct iwreq                        *wrq = (struct iwreq *) rq;
-    NDIS_802_11_BSSID_LIST_EX           *pBssidList = NULL;
-    PNDIS_WLAN_BSSID_EX                 pBss;
-    NDIS_802_11_SSID                    Ssid;
-    NDIS_802_11_CONFIGURATION           *pConfiguration = NULL;
-    RT_802_11_LINK_STATUS               *pLinkStatus = NULL;
-    RT_802_11_STA_CONFIG                *pStaConfig = NULL;
-    NDIS_802_11_STATISTICS              *pStatistics = NULL;
-    NDIS_802_11_RTS_THRESHOLD           RtsThresh;
-    NDIS_802_11_FRAGMENTATION_THRESHOLD FragThresh;
-    NDIS_802_11_POWER_MODE              PowerMode;
-    NDIS_802_11_NETWORK_INFRASTRUCTURE  BssType;
-    RT_802_11_PREAMBLE                  PreamType;
-    NDIS_802_11_AUTHENTICATION_MODE     AuthMode;
-    NDIS_802_11_WEP_STATUS              WepStatus;
-    NDIS_MEDIA_STATE                    MediaState;
-    ULONG                               BssBufSize, ulInfo=0, NetworkTypeList[4], apsd = 0;
-    USHORT                              BssLen = 0;
-    PUCHAR                              pBuf = NULL, pPtr;
-    INT                                 Status = NDIS_STATUS_SUCCESS;
-    UINT                                we_version_compiled;
-    UCHAR                               i, Padding = 0;
-    BOOLEAN                             RadioState;
-	UCHAR	driverVersion[8];
-    OID_SET_HT_PHYMODE			        *pHTPhyMode = NULL;
-
-
-#ifdef SNMP_SUPPORT
-	//for snmp, kathy
-	DefaultKeyIdxValue			*pKeyIdxValue;
-	INT							valueLen;
-	TX_RTY_CFG_STRUC			tx_rty_cfg;
-	ULONG						ShortRetryLimit, LongRetryLimit;
-	UCHAR						tmp[64];
-#endif //SNMP
-
-    switch(cmd)
-    {
-        case RT_OID_DEVICE_NAME:
-            wrq->u.data.length = sizeof(STA_NIC_DEVICE_NAME);
-            Status = copy_to_user(wrq->u.data.pointer, STA_NIC_DEVICE_NAME, wrq->u.data.length);
-            break;
-        case RT_OID_VERSION_INFO:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_VERSION_INFO \n"));
-			wrq->u.data.length = 8*sizeof(UCHAR);
-			sprintf(&driverVersion[0], "%s", STA_DRIVER_VERSION);
-			driverVersion[7] = '\0';
-			if (copy_to_user(wrq->u.data.pointer, &driverVersion, wrq->u.data.length))
-            {
-				Status = -EFAULT;
-            }
-            break;
-#ifdef RALINK_ATE
-		case RT_QUERY_ATE_TXDONE_COUNT:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_QUERY_ATE_TXDONE_COUNT \n"));
-			wrq->u.data.length = sizeof(UINT32);
-			if (copy_to_user(wrq->u.data.pointer, &pAdapter->ate.TxDoneCount, wrq->u.data.length))
-			{
-				Status = -EFAULT;
-			}
-			break;
-#endif // RALINK_ATE //
-        case OID_802_11_BSSID_LIST:
-            if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-            {
-            	/*
-            	 * Still scanning, indicate the caller should try again.
-            	 */
-            	DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_BSSID_LIST (Still scanning)\n"));
-				return -EAGAIN;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_BSSID_LIST (%d BSS returned)\n",pAdapter->ScanTab.BssNr));
-			pAdapter->StaCfg.bScanReqIsFromWebUI = FALSE;
-            // Claculate total buffer size required
-            BssBufSize = sizeof(ULONG);
-
-            for (i = 0; i < pAdapter->ScanTab.BssNr; i++)
-            {
-                // Align pointer to 4 bytes boundary.
-                //Padding = 4 - (pAdapter->ScanTab.BssEntry[i].VarIELen & 0x0003);
-                //if (Padding == 4)
-                //    Padding = 0;
-                BssBufSize += (sizeof(NDIS_WLAN_BSSID_EX) - 1 + sizeof(NDIS_802_11_FIXED_IEs) + pAdapter->ScanTab.BssEntry[i].VarIELen + Padding);
-            }
-
-            // For safety issue, we add 256 bytes just in case
-            BssBufSize += 256;
-            // Allocate the same size as passed from higher layer
-            pBuf = kmalloc(BssBufSize, MEM_ALLOC_FLAG);
-            if(pBuf == NULL)
-            {
-                Status = -ENOMEM;
-                break;
-            }
-            // Init 802_11_BSSID_LIST_EX structure
-            NdisZeroMemory(pBuf, BssBufSize);
-            pBssidList = (PNDIS_802_11_BSSID_LIST_EX) pBuf;
-            pBssidList->NumberOfItems = pAdapter->ScanTab.BssNr;
-
-            // Calculate total buffer length
-            BssLen = 4; // Consist of NumberOfItems
-            // Point to start of NDIS_WLAN_BSSID_EX
-            // pPtr = pBuf + sizeof(ULONG);
-            pPtr = (PUCHAR) &pBssidList->Bssid[0];
-            for (i = 0; i < pAdapter->ScanTab.BssNr; i++)
-            {
-                pBss = (PNDIS_WLAN_BSSID_EX) pPtr;
-                NdisMoveMemory(&pBss->MacAddress, &pAdapter->ScanTab.BssEntry[i].Bssid, MAC_ADDR_LEN);
-                if ((pAdapter->ScanTab.BssEntry[i].Hidden == 1) && (pAdapter->StaCfg.bShowHiddenSSID == FALSE))
-                {
-                    //
-					// We must return this SSID during 4way handshaking, otherwise Aegis will failed to parse WPA infomation
-					// and then failed to send EAPOl farame.
-					//
-					if ((pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA) && (pAdapter->StaCfg.PortSecured != WPA_802_1X_PORT_SECURED))
-					{
-						pBss->Ssid.SsidLength = pAdapter->ScanTab.BssEntry[i].SsidLen;
-						NdisMoveMemory(pBss->Ssid.Ssid, pAdapter->ScanTab.BssEntry[i].Ssid, pAdapter->ScanTab.BssEntry[i].SsidLen);
-					}
-					else
-                    	pBss->Ssid.SsidLength = 0;
-                }
-                else
-                {
-                    pBss->Ssid.SsidLength = pAdapter->ScanTab.BssEntry[i].SsidLen;
-                    NdisMoveMemory(pBss->Ssid.Ssid, pAdapter->ScanTab.BssEntry[i].Ssid, pAdapter->ScanTab.BssEntry[i].SsidLen);
-                }
-                pBss->Privacy = pAdapter->ScanTab.BssEntry[i].Privacy;
-                pBss->Rssi = pAdapter->ScanTab.BssEntry[i].Rssi - pAdapter->BbpRssiToDbmDelta;
-                pBss->NetworkTypeInUse = NetworkTypeInUseSanity(&pAdapter->ScanTab.BssEntry[i]);
-                pBss->Configuration.Length = sizeof(NDIS_802_11_CONFIGURATION);
-                pBss->Configuration.BeaconPeriod = pAdapter->ScanTab.BssEntry[i].BeaconPeriod;
-                pBss->Configuration.ATIMWindow = pAdapter->ScanTab.BssEntry[i].AtimWin;
-
-                MAP_CHANNEL_ID_TO_KHZ(pAdapter->ScanTab.BssEntry[i].Channel, pBss->Configuration.DSConfig);
-
-                if (pAdapter->ScanTab.BssEntry[i].BssType == BSS_INFRA)
-                    pBss->InfrastructureMode = Ndis802_11Infrastructure;
-                else
-                    pBss->InfrastructureMode = Ndis802_11IBSS;
-
-                NdisMoveMemory(pBss->SupportedRates, pAdapter->ScanTab.BssEntry[i].SupRate, pAdapter->ScanTab.BssEntry[i].SupRateLen);
-                NdisMoveMemory(pBss->SupportedRates + pAdapter->ScanTab.BssEntry[i].SupRateLen,
-                               pAdapter->ScanTab.BssEntry[i].ExtRate,
-                               pAdapter->ScanTab.BssEntry[i].ExtRateLen);
-
-                if (pAdapter->ScanTab.BssEntry[i].VarIELen == 0)
-                {
-                    pBss->IELength = sizeof(NDIS_802_11_FIXED_IEs);
-                    NdisMoveMemory(pBss->IEs, &pAdapter->ScanTab.BssEntry[i].FixIEs, sizeof(NDIS_802_11_FIXED_IEs));
-                    pPtr = pPtr + sizeof(NDIS_WLAN_BSSID_EX) - 1 + sizeof(NDIS_802_11_FIXED_IEs);
-                }
-                else
-                {
-                    pBss->IELength = (ULONG)(sizeof(NDIS_802_11_FIXED_IEs) + pAdapter->ScanTab.BssEntry[i].VarIELen);
-                    pPtr = pPtr + sizeof(NDIS_WLAN_BSSID_EX) - 1 + sizeof(NDIS_802_11_FIXED_IEs);
-                    NdisMoveMemory(pBss->IEs, &pAdapter->ScanTab.BssEntry[i].FixIEs, sizeof(NDIS_802_11_FIXED_IEs));
-                    NdisMoveMemory(pBss->IEs + sizeof(NDIS_802_11_FIXED_IEs), pAdapter->ScanTab.BssEntry[i].VarIEs, pAdapter->ScanTab.BssEntry[i].VarIELen);
-                    pPtr += pAdapter->ScanTab.BssEntry[i].VarIELen;
-                }
-                pBss->Length = (ULONG)(sizeof(NDIS_WLAN_BSSID_EX) - 1 + sizeof(NDIS_802_11_FIXED_IEs) + pAdapter->ScanTab.BssEntry[i].VarIELen + Padding);
-
-#if WIRELESS_EXT < 17
-                if ((BssLen + pBss->Length) < wrq->u.data.length)
-                BssLen += pBss->Length;
-                else
-                {
-                    pBssidList->NumberOfItems = i;
-                    break;
-                }
-#else
-                BssLen += pBss->Length;
-#endif
-            }
-
-#if WIRELESS_EXT < 17
-            wrq->u.data.length = BssLen;
-#else
-            if (BssLen > wrq->u.data.length)
-            {
-                kfree(pBssidList);
-                return -E2BIG;
-            }
-            else
-                wrq->u.data.length = BssLen;
-#endif
-            Status = copy_to_user(wrq->u.data.pointer, pBssidList, BssLen);
-            kfree(pBssidList);
-            break;
-        case OID_802_3_CURRENT_ADDRESS:
-            wrq->u.data.length = MAC_ADDR_LEN;
-            Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CurrentAddress, wrq->u.data.length);
-            break;
-        case OID_GEN_MEDIA_CONNECT_STATUS:
-            if (pAdapter->IndicateMediaState == NdisMediaStateConnected)
-                MediaState = NdisMediaStateConnected;
-            else
-                MediaState = NdisMediaStateDisconnected;
-
-            wrq->u.data.length = sizeof(NDIS_MEDIA_STATE);
-            Status = copy_to_user(wrq->u.data.pointer, &MediaState, wrq->u.data.length);
-            break;
-        case OID_802_11_BSSID:
-#ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				Status = NDIS_STATUS_RESOURCES;
-				break;
-			}
-#endif // RALINK_ATE //
-            if (INFRA_ON(pAdapter) || ADHOC_ON(pAdapter))
-            {
-                Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.Bssid, sizeof(NDIS_802_11_MAC_ADDRESS));
-
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_BSSID(=EMPTY)\n"));
-                Status = -ENOTCONN;
-            }
-            break;
-        case OID_802_11_SSID:
-			NdisZeroMemory(&Ssid, sizeof(NDIS_802_11_SSID));
-			NdisZeroMemory(Ssid.Ssid, MAX_LEN_OF_SSID);
-            Ssid.SsidLength = pAdapter->CommonCfg.SsidLen;
-			memcpy(Ssid.Ssid, pAdapter->CommonCfg.Ssid,	Ssid.SsidLength);
-            wrq->u.data.length = sizeof(NDIS_802_11_SSID);
-            Status = copy_to_user(wrq->u.data.pointer, &Ssid, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_SSID (Len=%d, ssid=%s)\n", Ssid.SsidLength,Ssid.Ssid));
-            break;
-        case RT_OID_802_11_QUERY_LINK_STATUS:
-            pLinkStatus = (RT_802_11_LINK_STATUS *) kmalloc(sizeof(RT_802_11_LINK_STATUS), MEM_ALLOC_FLAG);
-            if (pLinkStatus)
-            {
-                pLinkStatus->CurrTxRate = RateIdTo500Kbps[pAdapter->CommonCfg.TxRate];   // unit : 500 kbps
-                pLinkStatus->ChannelQuality = pAdapter->Mlme.ChannelQuality;
-                pLinkStatus->RxByteCount = pAdapter->RalinkCounters.ReceivedByteCount;
-                pLinkStatus->TxByteCount = pAdapter->RalinkCounters.TransmittedByteCount;
-        		pLinkStatus->CentralChannel = pAdapter->CommonCfg.CentralChannel;
-                wrq->u.data.length = sizeof(RT_802_11_LINK_STATUS);
-                Status = copy_to_user(wrq->u.data.pointer, pLinkStatus, wrq->u.data.length);
-                kfree(pLinkStatus);
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_LINK_STATUS\n"));
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_LINK_STATUS(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-        case OID_802_11_CONFIGURATION:
-            pConfiguration = (NDIS_802_11_CONFIGURATION *) kmalloc(sizeof(NDIS_802_11_CONFIGURATION), MEM_ALLOC_FLAG);
-            if (pConfiguration)
-            {
-                pConfiguration->Length = sizeof(NDIS_802_11_CONFIGURATION);
-                pConfiguration->BeaconPeriod = pAdapter->CommonCfg.BeaconPeriod;
-                pConfiguration->ATIMWindow = pAdapter->StaActive.AtimWin;
-                MAP_CHANNEL_ID_TO_KHZ(pAdapter->CommonCfg.Channel, pConfiguration->DSConfig);
-                wrq->u.data.length = sizeof(NDIS_802_11_CONFIGURATION);
-                Status = copy_to_user(wrq->u.data.pointer, pConfiguration, wrq->u.data.length);
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_CONFIGURATION(BeaconPeriod=%ld,AtimW=%ld,Channel=%d) \n",
-                                        pConfiguration->BeaconPeriod, pConfiguration->ATIMWindow, pAdapter->CommonCfg.Channel));
-				kfree(pConfiguration);
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_CONFIGURATION(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-		case RT_OID_802_11_SNR_0:
-			if ((pAdapter->StaCfg.LastSNR0 > 0))
-			{
-				ulInfo = ((0xeb	- pAdapter->StaCfg.LastSNR0) * 3) /	16 ;
-				wrq->u.data.length = sizeof(ulInfo);
-				Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-				DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_SNR_0(0x=%lx)\n", ulInfo));
-			}
-            else
-			    Status = -EFAULT;
-			break;
-		case RT_OID_802_11_SNR_1:
-			if ((pAdapter->Antenna.field.RxPath	> 1) &&
-                (pAdapter->StaCfg.LastSNR1 > 0))
-			{
-				ulInfo = ((0xeb	- pAdapter->StaCfg.LastSNR1) * 3) /	16 ;
-				wrq->u.data.length = sizeof(ulInfo);
-				Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-				DBGPRINT(RT_DEBUG_TRACE,("Query::RT_OID_802_11_SNR_1(0x=%lx)\n",ulInfo));
-			}
-			else
-				Status = -EFAULT;
-            DBGPRINT(RT_DEBUG_TRACE,("Query::RT_OID_802_11_SNR_1(pAdapter->StaCfg.LastSNR1=%d)\n",pAdapter->StaCfg.LastSNR1));
-			break;
-        case OID_802_11_RSSI_TRIGGER:
-            ulInfo = pAdapter->StaCfg.RssiSample.LastRssi0 - pAdapter->BbpRssiToDbmDelta;
-            wrq->u.data.length = sizeof(ulInfo);
-            Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_RSSI_TRIGGER(=%ld)\n", ulInfo));
-            break;
-		case OID_802_11_RSSI:
-        case RT_OID_802_11_RSSI:
-			ulInfo = pAdapter->StaCfg.RssiSample.LastRssi0;
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-			break;
-		case RT_OID_802_11_RSSI_1:
-            ulInfo = pAdapter->StaCfg.RssiSample.LastRssi1;
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-			break;
-        case RT_OID_802_11_RSSI_2:
-            ulInfo = pAdapter->StaCfg.RssiSample.LastRssi2;
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-			break;
-        case OID_802_11_STATISTICS:
-            pStatistics = (NDIS_802_11_STATISTICS *) kmalloc(sizeof(NDIS_802_11_STATISTICS), MEM_ALLOC_FLAG);
-            if (pStatistics)
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_STATISTICS \n"));
-                // add the most up-to-date h/w raw counters into software counters
-			    NICUpdateRawCounters(pAdapter);
-
-                // Sanity check for calculation of sucessful count
-                if (pAdapter->WlanCounters.TransmittedFragmentCount.QuadPart < pAdapter->WlanCounters.RetryCount.QuadPart)
-                    pAdapter->WlanCounters.TransmittedFragmentCount.QuadPart = pAdapter->WlanCounters.RetryCount.QuadPart;
-
-                pStatistics->TransmittedFragmentCount.QuadPart = pAdapter->WlanCounters.TransmittedFragmentCount.QuadPart;
-                pStatistics->MulticastTransmittedFrameCount.QuadPart = pAdapter->WlanCounters.MulticastTransmittedFrameCount.QuadPart;
-                pStatistics->FailedCount.QuadPart = pAdapter->WlanCounters.FailedCount.QuadPart;
-                pStatistics->RetryCount.QuadPart = pAdapter->WlanCounters.RetryCount.QuadPart;
-                pStatistics->MultipleRetryCount.QuadPart = pAdapter->WlanCounters.MultipleRetryCount.QuadPart;
-                pStatistics->RTSSuccessCount.QuadPart = pAdapter->WlanCounters.RTSSuccessCount.QuadPart;
-                pStatistics->RTSFailureCount.QuadPart = pAdapter->WlanCounters.RTSFailureCount.QuadPart;
-                pStatistics->ACKFailureCount.QuadPart = pAdapter->WlanCounters.ACKFailureCount.QuadPart;
-                pStatistics->FrameDuplicateCount.QuadPart = pAdapter->WlanCounters.FrameDuplicateCount.QuadPart;
-                pStatistics->ReceivedFragmentCount.QuadPart = pAdapter->WlanCounters.ReceivedFragmentCount.QuadPart;
-                pStatistics->MulticastReceivedFrameCount.QuadPart = pAdapter->WlanCounters.MulticastReceivedFrameCount.QuadPart;
-#ifdef DBG
-                pStatistics->FCSErrorCount = pAdapter->RalinkCounters.RealFcsErrCount;
-#else
-                pStatistics->FCSErrorCount.QuadPart = pAdapter->WlanCounters.FCSErrorCount.QuadPart;
-                pStatistics->FrameDuplicateCount.u.LowPart = pAdapter->WlanCounters.FrameDuplicateCount.u.LowPart / 100;
-#endif
-                wrq->u.data.length = sizeof(NDIS_802_11_STATISTICS);
-                Status = copy_to_user(wrq->u.data.pointer, pStatistics, wrq->u.data.length);
-                kfree(pStatistics);
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_STATISTICS(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-        case OID_GEN_RCV_OK:
-            ulInfo = pAdapter->Counters8023.GoodReceives;
-            wrq->u.data.length = sizeof(ulInfo);
-            Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-            break;
-        case OID_GEN_RCV_NO_BUFFER:
-            ulInfo = pAdapter->Counters8023.RxNoBuffer;
-            wrq->u.data.length = sizeof(ulInfo);
-            Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-            break;
-        case RT_OID_802_11_PHY_MODE:
-            ulInfo = (ULONG)pAdapter->CommonCfg.PhyMode;
-            wrq->u.data.length = sizeof(ulInfo);
-            Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_PHY_MODE (=%ld)\n", ulInfo));
-            break;
-        case RT_OID_802_11_STA_CONFIG:
-            pStaConfig = (RT_802_11_STA_CONFIG *) kmalloc(sizeof(RT_802_11_STA_CONFIG), MEM_ALLOC_FLAG);
-            if (pStaConfig)
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_STA_CONFIG\n"));
-                pStaConfig->EnableTxBurst = pAdapter->CommonCfg.bEnableTxBurst;
-                pStaConfig->EnableTurboRate = 0;
-                pStaConfig->UseBGProtection = pAdapter->CommonCfg.UseBGProtection;
-                pStaConfig->UseShortSlotTime = pAdapter->CommonCfg.bUseShortSlotTime;
-                //pStaConfig->AdhocMode = pAdapter->StaCfg.AdhocMode;
-                pStaConfig->HwRadioStatus = (pAdapter->StaCfg.bHwRadio == TRUE) ? 1 : 0;
-                pStaConfig->Rsv1 = 0;
-                pStaConfig->SystemErrorBitmap = pAdapter->SystemErrorBitmap;
-                wrq->u.data.length = sizeof(RT_802_11_STA_CONFIG);
-                Status = copy_to_user(wrq->u.data.pointer, pStaConfig, wrq->u.data.length);
-                kfree(pStaConfig);
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_STA_CONFIG(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-        case OID_802_11_RTS_THRESHOLD:
-            RtsThresh = pAdapter->CommonCfg.RtsThreshold;
-            wrq->u.data.length = sizeof(RtsThresh);
-            Status = copy_to_user(wrq->u.data.pointer, &RtsThresh, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_RTS_THRESHOLD(=%ld)\n", RtsThresh));
-            break;
-        case OID_802_11_FRAGMENTATION_THRESHOLD:
-            FragThresh = pAdapter->CommonCfg.FragmentThreshold;
-            if (pAdapter->CommonCfg.bUseZeroToDisableFragment == TRUE)
-                FragThresh = 0;
-            wrq->u.data.length = sizeof(FragThresh);
-            Status = copy_to_user(wrq->u.data.pointer, &FragThresh, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_FRAGMENTATION_THRESHOLD(=%ld)\n", FragThresh));
-            break;
-        case OID_802_11_POWER_MODE:
-            PowerMode = pAdapter->StaCfg.WindowsPowerMode;
-            wrq->u.data.length = sizeof(PowerMode);
-            Status = copy_to_user(wrq->u.data.pointer, &PowerMode, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_POWER_MODE(=%d)\n", PowerMode));
-            break;
-        case RT_OID_802_11_RADIO:
-            RadioState = (BOOLEAN) pAdapter->StaCfg.bSwRadio;
-            wrq->u.data.length = sizeof(RadioState);
-            Status = copy_to_user(wrq->u.data.pointer, &RadioState, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_RADIO (=%d)\n", RadioState));
-            break;
-        case OID_802_11_INFRASTRUCTURE_MODE:
-            if (pAdapter->StaCfg.BssType == BSS_ADHOC)
-                BssType = Ndis802_11IBSS;
-            else if (pAdapter->StaCfg.BssType == BSS_INFRA)
-                BssType = Ndis802_11Infrastructure;
-            else if (pAdapter->StaCfg.BssType == BSS_MONITOR)
-                BssType = Ndis802_11Monitor;
-            else
-                BssType = Ndis802_11AutoUnknown;
-
-            wrq->u.data.length = sizeof(BssType);
-            Status = copy_to_user(wrq->u.data.pointer, &BssType, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_INFRASTRUCTURE_MODE(=%d)\n", BssType));
-            break;
-        case RT_OID_802_11_PREAMBLE:
-            PreamType = pAdapter->CommonCfg.TxPreamble;
-            wrq->u.data.length = sizeof(PreamType);
-            Status = copy_to_user(wrq->u.data.pointer, &PreamType, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_PREAMBLE(=%d)\n", PreamType));
-            break;
-        case OID_802_11_AUTHENTICATION_MODE:
-            AuthMode = pAdapter->StaCfg.AuthMode;
-            wrq->u.data.length = sizeof(AuthMode);
-            Status = copy_to_user(wrq->u.data.pointer, &AuthMode, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_AUTHENTICATION_MODE(=%d)\n", AuthMode));
-            break;
-        case OID_802_11_WEP_STATUS:
-            WepStatus = pAdapter->StaCfg.WepStatus;
-            wrq->u.data.length = sizeof(WepStatus);
-            Status = copy_to_user(wrq->u.data.pointer, &WepStatus, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_WEP_STATUS(=%d)\n", WepStatus));
-            break;
-        case OID_802_11_TX_POWER_LEVEL:
-			wrq->u.data.length = sizeof(ULONG);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.TxPower, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_TX_POWER_LEVEL %x\n",pAdapter->CommonCfg.TxPower));
-			break;
-        case RT_OID_802_11_TX_POWER_LEVEL_1:
-            wrq->u.data.length = sizeof(ULONG);
-            Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.TxPowerPercentage, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_TX_POWER_LEVEL_1 (=%ld)\n", pAdapter->CommonCfg.TxPowerPercentage));
-			break;
-        case OID_802_11_NETWORK_TYPES_SUPPORTED:
-			if ((pAdapter->RfIcType	== RFIC_2850) || (pAdapter->RfIcType ==	RFIC_2750))
-			{
-				NetworkTypeList[0] = 3;                 // NumberOfItems = 3
-				NetworkTypeList[1] = Ndis802_11DS;      // NetworkType[1] = 11b
-				NetworkTypeList[2] = Ndis802_11OFDM24;  // NetworkType[2] = 11g
-				NetworkTypeList[3] = Ndis802_11OFDM5;   // NetworkType[3] = 11a
-                wrq->u.data.length = 16;
-				Status = copy_to_user(wrq->u.data.pointer, &NetworkTypeList[0], wrq->u.data.length);
-			}
-			else
-			{
-				NetworkTypeList[0] = 2;                 // NumberOfItems = 2
-				NetworkTypeList[1] = Ndis802_11DS;      // NetworkType[1] = 11b
-				NetworkTypeList[2] = Ndis802_11OFDM24;  // NetworkType[2] = 11g
-			    wrq->u.data.length = 12;
-				Status = copy_to_user(wrq->u.data.pointer, &NetworkTypeList[0], wrq->u.data.length);
-			}
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_NETWORK_TYPES_SUPPORTED\n"));
-				break;
-	    case OID_802_11_NETWORK_TYPE_IN_USE:
-            wrq->u.data.length = sizeof(ULONG);
-			if (pAdapter->CommonCfg.PhyMode == PHY_11A)
-				ulInfo = Ndis802_11OFDM5;
-			else if ((pAdapter->CommonCfg.PhyMode == PHY_11BG_MIXED) || (pAdapter->CommonCfg.PhyMode == PHY_11G))
-				ulInfo = Ndis802_11OFDM24;
-			else
-				ulInfo = Ndis802_11DS;
-            Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-			break;
-        case RT_OID_802_11_QUERY_LAST_RX_RATE:
-            ulInfo = (ULONG)pAdapter->LastRxRate;
-            wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_LAST_RX_RATE (=%ld)\n", ulInfo));
-			break;
-		case RT_OID_802_11_QUERY_LAST_TX_RATE:
-			//ulInfo = (ULONG)pAdapter->LastTxRate;
-			ulInfo = (ULONG)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.word;
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_LAST_TX_RATE (=%lx)\n", ulInfo));
-			break;
-        case RT_OID_802_11_QUERY_EEPROM_VERSION:
-            wrq->u.data.length = sizeof(ULONG);
-            Status = copy_to_user(wrq->u.data.pointer, &pAdapter->EepromVersion, wrq->u.data.length);
-            break;
-        case RT_OID_802_11_QUERY_FIRMWARE_VERSION:
-            wrq->u.data.length = sizeof(ULONG);
-            Status = copy_to_user(wrq->u.data.pointer, &pAdapter->FirmwareVersion, wrq->u.data.length);
-			break;
-	    case RT_OID_802_11_QUERY_NOISE_LEVEL:
-			wrq->u.data.length = sizeof(UCHAR);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->BbpWriteLatch[66], wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_NOISE_LEVEL (=%d)\n", pAdapter->BbpWriteLatch[66]));
-			break;
-	    case RT_OID_802_11_EXTRA_INFO:
-			wrq->u.data.length = sizeof(ULONG);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->ExtraInfo, wrq->u.data.length);
-	        DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_EXTRA_INFO (=%ld)\n", pAdapter->ExtraInfo));
-	        break;
-	    case RT_OID_WE_VERSION_COMPILED:
-	        wrq->u.data.length = sizeof(UINT);
-	        we_version_compiled = WIRELESS_EXT;
-	        Status = copy_to_user(wrq->u.data.pointer, &we_version_compiled, wrq->u.data.length);
-	        break;
-		case RT_OID_802_11_QUERY_APSD_SETTING:
-			apsd = (pAdapter->CommonCfg.bAPSDCapable | (pAdapter->CommonCfg.bAPSDAC_BE << 1) | (pAdapter->CommonCfg.bAPSDAC_BK << 2)
-				| (pAdapter->CommonCfg.bAPSDAC_VI << 3)	| (pAdapter->CommonCfg.bAPSDAC_VO << 4)	| (pAdapter->CommonCfg.MaxSPLength << 5));
-
-			wrq->u.data.length = sizeof(ULONG);
-			Status = copy_to_user(wrq->u.data.pointer, &apsd, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_APSD_SETTING (=0x%lx,APSDCap=%d,AC_BE=%d,AC_BK=%d,AC_VI=%d,AC_VO=%d,MAXSPLen=%d)\n",
-				apsd,pAdapter->CommonCfg.bAPSDCapable,pAdapter->CommonCfg.bAPSDAC_BE,pAdapter->CommonCfg.bAPSDAC_BK,pAdapter->CommonCfg.bAPSDAC_VI,pAdapter->CommonCfg.bAPSDAC_VO,pAdapter->CommonCfg.MaxSPLength));
-			break;
-		case RT_OID_802_11_QUERY_APSD_PSM:
-			wrq->u.data.length = sizeof(ULONG);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.bAPSDForcePowerSave, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_APSD_PSM (=%d)\n", pAdapter->CommonCfg.bAPSDForcePowerSave));
-			break;
-		case RT_OID_802_11_QUERY_WMM:
-			wrq->u.data.length = sizeof(BOOLEAN);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.bWmmCapable, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_WMM (=%d)\n",	pAdapter->CommonCfg.bWmmCapable));
-			break;
-#ifdef WPA_SUPPLICANT_SUPPORT
-        case RT_OID_NEW_DRIVER:
-            {
-                UCHAR enabled = 1;
-    	        wrq->u.data.length = sizeof(UCHAR);
-    	        Status = copy_to_user(wrq->u.data.pointer, &enabled, wrq->u.data.length);
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_NEW_DRIVER (=%d)\n", enabled));
-            }
-	        break;
-        case RT_OID_WPA_SUPPLICANT_SUPPORT:
-	        wrq->u.data.length = sizeof(UCHAR);
-	        Status = copy_to_user(wrq->u.data.pointer, &pAdapter->StaCfg.WpaSupplicantUP, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_WPA_SUPPLICANT_SUPPORT (=%d)\n", pAdapter->StaCfg.WpaSupplicantUP));
-	        break;
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-        case RT_OID_DRIVER_DEVICE_NAME:
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_DRIVER_DEVICE_NAME \n"));
-			wrq->u.data.length = 16;
-			if (copy_to_user(wrq->u.data.pointer, pAdapter->StaCfg.dev_name, wrq->u.data.length))
-			{
-				Status = -EFAULT;
-			}
-            break;
-        case RT_OID_802_11_QUERY_HT_PHYMODE:
-            pHTPhyMode = (OID_SET_HT_PHYMODE *) kmalloc(sizeof(OID_SET_HT_PHYMODE), MEM_ALLOC_FLAG);
-            if (pHTPhyMode)
-            {
-                pHTPhyMode->PhyMode = pAdapter->CommonCfg.PhyMode;
-    			pHTPhyMode->HtMode = (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE;
-    			pHTPhyMode->BW = (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.BW;
-    			pHTPhyMode->MCS= (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.MCS;
-    			pHTPhyMode->SHORTGI= (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.ShortGI;
-    			pHTPhyMode->STBC= (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.STBC;
-
-    			pHTPhyMode->ExtOffset = ((pAdapter->CommonCfg.CentralChannel < pAdapter->CommonCfg.Channel) ? (EXTCHA_BELOW) : (EXTCHA_ABOVE));
-                wrq->u.data.length = sizeof(OID_SET_HT_PHYMODE);
-                if (copy_to_user(wrq->u.data.pointer, pHTPhyMode, wrq->u.data.length))
-    			{
-    				Status = -EFAULT;
-    			}
-    			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_HT_PHYMODE (PhyMode = %d, MCS =%d, BW = %d, STBC = %d, ExtOffset=%d)\n",
-    				pHTPhyMode->HtMode, pHTPhyMode->MCS, pHTPhyMode->BW, pHTPhyMode->STBC, pHTPhyMode->ExtOffset));
-    			DBGPRINT(RT_DEBUG_TRACE, (" MlmeUpdateTxRates (.word = %x )\n", pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.word));
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_STA_CONFIG(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-        case RT_OID_802_11_COUNTRY_REGION:
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_COUNTRY_REGION \n"));
-			wrq->u.data.length = sizeof(ulInfo);
-            ulInfo = pAdapter->CommonCfg.CountryRegionForABand;
-            ulInfo = (ulInfo << 8)|(pAdapter->CommonCfg.CountryRegion);
-			if (copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length))
-            {
-				Status = -EFAULT;
-            }
-            break;
-        case RT_OID_802_11_QUERY_DAT_HT_PHYMODE:
-            pHTPhyMode = (OID_SET_HT_PHYMODE *) kmalloc(sizeof(OID_SET_HT_PHYMODE), MEM_ALLOC_FLAG);
-            if (pHTPhyMode)
-            {
-                pHTPhyMode->PhyMode = pAdapter->CommonCfg.PhyMode;
-    			pHTPhyMode->HtMode = (UCHAR)pAdapter->CommonCfg.RegTransmitSetting.field.HTMODE;
-    			pHTPhyMode->BW = (UCHAR)pAdapter->CommonCfg.RegTransmitSetting.field.BW;
-    			pHTPhyMode->MCS= (UCHAR)pAdapter->StaCfg.DesiredTransmitSetting.field.MCS;
-    			pHTPhyMode->SHORTGI= (UCHAR)pAdapter->CommonCfg.RegTransmitSetting.field.ShortGI;
-    			pHTPhyMode->STBC= (UCHAR)pAdapter->CommonCfg.RegTransmitSetting.field.STBC;
-
-                wrq->u.data.length = sizeof(OID_SET_HT_PHYMODE);
-                if (copy_to_user(wrq->u.data.pointer, pHTPhyMode, wrq->u.data.length))
-    			{
-    				Status = -EFAULT;
-    			}
-    			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_HT_PHYMODE (PhyMode = %d, MCS =%d, BW = %d, STBC = %d, ExtOffset=%d)\n",
-    				pHTPhyMode->HtMode, pHTPhyMode->MCS, pHTPhyMode->BW, pHTPhyMode->STBC, pHTPhyMode->ExtOffset));
-    			DBGPRINT(RT_DEBUG_TRACE, (" MlmeUpdateTxRates (.word = %x )\n", pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.word));
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_STA_CONFIG(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-        case RT_OID_QUERY_MULTIPLE_CARD_SUPPORT:
-			wrq->u.data.length = sizeof(UCHAR);
-            i = 0;
-#ifdef MULTIPLE_CARD_SUPPORT
-            i = 1;
-#endif // MULTIPLE_CARD_SUPPORT //
-			if (copy_to_user(wrq->u.data.pointer, &i, wrq->u.data.length))
-            {
-				Status = -EFAULT;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_QUERY_MULTIPLE_CARD_SUPPORT(=%d) \n", i));
-            break;
-#ifdef SNMP_SUPPORT
-		case RT_OID_802_11_MAC_ADDRESS:
-            wrq->u.data.length = MAC_ADDR_LEN;
-            Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CurrentAddress, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_MANUFACTUREROUI:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_MANUFACTUREROUI \n"));
-			wrq->u.data.length = ManufacturerOUI_LEN;
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CurrentAddress, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_MANUFACTURERNAME:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_MANUFACTURERNAME \n"));
-			wrq->u.data.length = strlen(ManufacturerNAME);
-			Status = copy_to_user(wrq->u.data.pointer, ManufacturerNAME, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_RESOURCETYPEIDNAME:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_RESOURCETYPEIDNAME \n"));
-			wrq->u.data.length = strlen(ResourceTypeIdName);
-			Status = copy_to_user(wrq->u.data.pointer, ResourceTypeIdName, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_PRIVACYOPTIONIMPLEMENTED:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_PRIVACYOPTIONIMPLEMENTED \n"));
-			ulInfo = 1; // 1 is support wep else 2 is not support.
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_POWERMANAGEMENTMODE:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_POWERMANAGEMENTMODE \n"));
-			if (pAdapter->StaCfg.Psm == PSMP_ACTION)
-				ulInfo = 1; // 1 is power active else 2 is power save.
-			else
-				ulInfo = 2;
-
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-			break;
-
-		case OID_802_11_WEPDEFAULTKEYVALUE:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_WEPDEFAULTKEYVALUE \n"));
-			//KeyIdxValue.KeyIdx = pAd->PortCfg.MBSSID[pAd->IoctlIF].DefaultKeyId;
-			pKeyIdxValue = wrq->u.data.pointer;
-			DBGPRINT(RT_DEBUG_TRACE,("KeyIdxValue.KeyIdx = %d, \n",pKeyIdxValue->KeyIdx));
-			valueLen = pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen;
-			NdisMoveMemory(pKeyIdxValue->Value,
-						   &pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].Key,
-						   valueLen);
-			pKeyIdxValue->Value[valueLen]='\0';
-
-			wrq->u.data.length = sizeof(DefaultKeyIdxValue);
-
-			Status = copy_to_user(wrq->u.data.pointer, pKeyIdxValue, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE,("DefaultKeyId = %d, total len = %d, str len=%d, KeyValue= %02x %02x %02x %02x \n", pAdapter->StaCfg.DefaultKeyId, wrq->u.data.length, pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen,
-			pAdapter->SharedKey[BSS0][0].Key[0],
-			pAdapter->SharedKey[BSS0][1].Key[0],
-			pAdapter->SharedKey[BSS0][2].Key[0],
-			pAdapter->SharedKey[BSS0][3].Key[0]));
-			break;
-
-		case OID_802_11_WEPDEFAULTKEYID:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_WEPDEFAULTKEYID \n"));
-			wrq->u.data.length = sizeof(UCHAR);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->StaCfg.DefaultKeyId, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("DefaultKeyId =%d \n", pAdapter->StaCfg.DefaultKeyId));
-			break;
-
-		case RT_OID_802_11_WEPKEYMAPPINGLENGTH:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_WEPKEYMAPPINGLENGTH \n"));
-			wrq->u.data.length = sizeof(UCHAR);
-			Status = copy_to_user(wrq->u.data.pointer,
-									&pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen,
-									wrq->u.data.length);
-			break;
-
-		case OID_802_11_SHORTRETRYLIMIT:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_SHORTRETRYLIMIT \n"));
-			wrq->u.data.length = sizeof(ULONG);
-			RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
-			ShortRetryLimit = tx_rty_cfg.field.ShortRtyLimit;
-			DBGPRINT(RT_DEBUG_TRACE, ("ShortRetryLimit =%ld,  tx_rty_cfg.field.ShortRetryLimit=%d\n", ShortRetryLimit, tx_rty_cfg.field.ShortRtyLimit));
-			Status = copy_to_user(wrq->u.data.pointer, &ShortRetryLimit, wrq->u.data.length);
-			break;
-
-		case OID_802_11_LONGRETRYLIMIT:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_LONGRETRYLIMIT \n"));
-			wrq->u.data.length = sizeof(ULONG);
-			RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
-			LongRetryLimit = tx_rty_cfg.field.LongRtyLimit;
-			DBGPRINT(RT_DEBUG_TRACE, ("LongRetryLimit =%ld,  tx_rty_cfg.field.LongRtyLimit=%d\n", LongRetryLimit, tx_rty_cfg.field.LongRtyLimit));
-			Status = copy_to_user(wrq->u.data.pointer, &LongRetryLimit, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_PRODUCTID:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_PRODUCTID \n"));
-
-#ifdef RT2870
-			sprintf(tmp, "%04x %04x\n", ((POS_COOKIE)pAdapter->OS_Cookie)->pUsb_Dev->descriptor.idVendor ,((POS_COOKIE)pAdapter->OS_Cookie)->pUsb_Dev->descriptor.idProduct);
-
-#endif // RT2870 //
-			wrq->u.data.length = strlen(tmp);
-			Status = copy_to_user(wrq->u.data.pointer, tmp, wrq->u.data.length);
-			break;
-
-		case RT_OID_802_11_MANUFACTUREID:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_MANUFACTUREID \n"));
-			wrq->u.data.length = strlen(ManufacturerNAME);
-			Status = copy_to_user(wrq->u.data.pointer, ManufacturerNAME, wrq->u.data.length);
-			break;
-
-		case OID_802_11_CURRENTCHANNEL:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_CURRENTCHANNEL \n"));
-			wrq->u.data.length = sizeof(UCHAR);
-			DBGPRINT(RT_DEBUG_TRACE, ("sizeof UCHAR=%d, channel=%d \n", sizeof(UCHAR), pAdapter->CommonCfg.Channel));
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.Channel, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
-			break;
-#endif //SNMP_SUPPORT
-
-		case OID_802_11_BUILD_CHANNEL_EX:
-			{
-				UCHAR value;
-				DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_BUILD_CHANNEL_EX \n"));
-				wrq->u.data.length = sizeof(UCHAR);
-#ifdef EXT_BUILD_CHANNEL_LIST
-				DBGPRINT(RT_DEBUG_TRACE, ("Support EXT_BUILD_CHANNEL_LIST.\n"));
-				value = 1;
-#else
-				DBGPRINT(RT_DEBUG_TRACE, ("Doesn't support EXT_BUILD_CHANNEL_LIST.\n"));
-				value = 0;
-#endif // EXT_BUILD_CHANNEL_LIST //
-				Status = copy_to_user(wrq->u.data.pointer, &value, 1);
-				DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
-			}
-			break;
-
-		case OID_802_11_GET_CH_LIST:
-			{
-				PRT_CHANNEL_LIST_INFO pChListBuf;
-
-				DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_GET_CH_LIST \n"));
-				if (pAdapter->ChannelListNum == 0)
-				{
-					wrq->u.data.length = 0;
-					break;
-				}
-
-				pChListBuf = (RT_CHANNEL_LIST_INFO *) kmalloc(sizeof(RT_CHANNEL_LIST_INFO), MEM_ALLOC_FLAG);
-				if (pChListBuf == NULL)
-				{
-					wrq->u.data.length = 0;
-					break;
-				}
-
-				pChListBuf->ChannelListNum = pAdapter->ChannelListNum;
-				for (i = 0; i < pChListBuf->ChannelListNum; i++)
-					pChListBuf->ChannelList[i] = pAdapter->ChannelList[i].Channel;
-
-				wrq->u.data.length = sizeof(RT_CHANNEL_LIST_INFO);
-				Status = copy_to_user(wrq->u.data.pointer, pChListBuf, sizeof(RT_CHANNEL_LIST_INFO));
-				DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
-
-				if (pChListBuf)
-					kfree(pChListBuf);
-			}
-			break;
-
-		case OID_802_11_GET_COUNTRY_CODE:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_GET_COUNTRY_CODE \n"));
-			wrq->u.data.length = 2;
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.CountryCode, 2);
-			DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
-			break;
-
-		case OID_802_11_GET_CHANNEL_GEOGRAPHY:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_GET_CHANNEL_GEOGRAPHY \n"));
-			wrq->u.data.length = 1;
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.Geography, 1);
-			DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
-			break;
-
-
-#ifdef QOS_DLS_SUPPORT
-		case RT_OID_802_11_QUERY_DLS:
-			wrq->u.data.length = sizeof(BOOLEAN);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.bDLSCapable, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_DLS(=%d)\n", pAdapter->CommonCfg.bDLSCapable));
-			break;
-
-		case RT_OID_802_11_QUERY_DLS_PARAM:
-			{
-				PRT_802_11_DLS_INFO	pDlsInfo = kmalloc(sizeof(RT_802_11_DLS_INFO), GFP_ATOMIC);
-				if (pDlsInfo == NULL)
-					break;
-
-				for (i=0; i<MAX_NUM_OF_DLS_ENTRY; i++)
-				{
-					RTMPMoveMemory(&pDlsInfo->Entry[i], &pAdapter->StaCfg.DLSEntry[i], sizeof(RT_802_11_DLS_UI));
-				}
-
-				pDlsInfo->num = MAX_NUM_OF_DLS_ENTRY;
-				wrq->u.data.length = sizeof(RT_802_11_DLS_INFO);
-				Status = copy_to_user(wrq->u.data.pointer, pDlsInfo, wrq->u.data.length);
-				DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_DLS_PARAM\n"));
-
-				if (pDlsInfo)
-					kfree(pDlsInfo);
-			}
-			break;
-#endif // QOS_DLS_SUPPORT //
-        default:
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::unknown IOCTL's subcmd = 0x%08x\n", cmd));
-            Status = -EOPNOTSUPP;
-            break;
-    }
-    return Status;
-}
-
-INT rt28xx_sta_ioctl(
-	IN	struct net_device	*net_dev,
-	IN	OUT	struct ifreq	*rq,
-	IN	INT					cmd)
-{
-	POS_COOKIE			pObj;
-	VIRTUAL_ADAPTER		*pVirtualAd = NULL;
-	RTMP_ADAPTER        *pAd = NULL;
-	struct iwreq        *wrq = (struct iwreq *) rq;
-	BOOLEAN				StateMachineTouched = FALSE;
-	INT					Status = NDIS_STATUS_SUCCESS;
-	USHORT				subcmd;
-
-	if (net_dev->priv_flags == INT_MAIN)
-	{
-		pAd = net_dev->ml_priv;
-	}
-	else
-	{
-		pVirtualAd = net_dev->ml_priv;
-		pAd = pVirtualAd->RtmpDev->ml_priv;
-	}
-	pObj = (POS_COOKIE) pAd->OS_Cookie;
-
-	if (pAd == NULL)
-	{
-		/* if 1st open fail, pAd will be free;
-		   So the net_dev->ml_priv will be NULL in 2rd open */
-		return -ENETDOWN;
-	}
-
-    //check if the interface is down
-    if(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-    {
-#ifdef CONFIG_APSTA_MIXED_SUPPORT
-	    if (wrq->u.data.pointer == NULL)
-	    {
-		    return Status;
-	    }
-
-	    if (strstr(wrq->u.data.pointer, "OpMode") == NULL)
-#endif // CONFIG_APSTA_MIXED_SUPPORT //
-        {
-            DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
-		    return -ENETDOWN;
-        }
-    }
-
-	{	// determine this ioctl command is comming from which interface.
-		pObj->ioctl_if_type = INT_MAIN;
-		pObj->ioctl_if = MAIN_MBSSID;
-	}
-
-	switch(cmd)
-	{
-#ifdef RALINK_ATE
-#ifdef RALINK_28xx_QA
-		case RTPRIV_IOCTL_ATE:
-			{
-				RtmpDoAte(pAd, wrq);
-			}
-			break;
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-        case SIOCGIFHWADDR:
-			DBGPRINT(RT_DEBUG_TRACE, ("IOCTL::SIOCGIFHWADDR\n"));
-			memcpy(wrq->u.name, pAd->CurrentAddress, ETH_ALEN);
-			break;
-		case SIOCGIWNAME:
-        {
-        	char *name=&wrq->u.name[0];
-        	rt_ioctl_giwname(net_dev, NULL, name, NULL);
-			break;
-		}
-		case SIOCGIWESSID:  //Get ESSID
-        {
-        	struct iw_point *essid=&wrq->u.essid;
-        	rt_ioctl_giwessid(net_dev, NULL, essid, essid->pointer);
-			break;
-		}
-		case SIOCSIWESSID:  //Set ESSID
-        {
-        	struct iw_point	*essid=&wrq->u.essid;
-        	rt_ioctl_siwessid(net_dev, NULL, essid, essid->pointer);
-			break;
-		}
-		case SIOCSIWNWID:   // set network id (the cell)
-		case SIOCGIWNWID:   // get network id
-			Status = -EOPNOTSUPP;
-			break;
-		case SIOCSIWFREQ:   //set channel/frequency (Hz)
-        {
-        	struct iw_freq *freq=&wrq->u.freq;
-        	rt_ioctl_siwfreq(net_dev, NULL, freq, NULL);
-			break;
-		}
-		case SIOCGIWFREQ:   // get channel/frequency (Hz)
-        {
-        	struct iw_freq *freq=&wrq->u.freq;
-        	rt_ioctl_giwfreq(net_dev, NULL, freq, NULL);
-			break;
-		}
-		case SIOCSIWNICKN: //set node name/nickname
-        {
-        	struct iw_point *data=&wrq->u.data;
-        	rt_ioctl_siwnickn(net_dev, NULL, data, NULL);
-			break;
-		}
-		case SIOCGIWNICKN: //get node name/nickname
-        {
-        	struct iw_point *data=&wrq->u.data;
-        	rt_ioctl_giwnickn(net_dev, NULL, data, NULL);
-			break;
-		}
-		case SIOCGIWRATE:   //get default bit rate (bps)
-		    rt_ioctl_giwrate(net_dev, NULL, &wrq->u, NULL);
-            break;
-	    case SIOCSIWRATE:  //set default bit rate (bps)
-	        rt_ioctl_siwrate(net_dev, NULL, &wrq->u, NULL);
-            break;
-        case SIOCGIWRTS:  // get RTS/CTS threshold (bytes)
-        {
-        	struct iw_param *rts=&wrq->u.rts;
-        	rt_ioctl_giwrts(net_dev, NULL, rts, NULL);
-			break;
-		}
-        case SIOCSIWRTS:  //set RTS/CTS threshold (bytes)
-        {
-        	struct iw_param *rts=&wrq->u.rts;
-        	rt_ioctl_siwrts(net_dev, NULL, rts, NULL);
-			break;
-		}
-        case SIOCGIWFRAG:  //get fragmentation thr (bytes)
-        {
-        	struct iw_param *frag=&wrq->u.frag;
-        	rt_ioctl_giwfrag(net_dev, NULL, frag, NULL);
-			break;
-		}
-        case SIOCSIWFRAG:  //set fragmentation thr (bytes)
-        {
-        	struct iw_param *frag=&wrq->u.frag;
-        	rt_ioctl_siwfrag(net_dev, NULL, frag, NULL);
-			break;
-		}
-        case SIOCGIWENCODE:  //get encoding token & mode
-        {
-        	struct iw_point *erq=&wrq->u.encoding;
-        	if(erq->pointer)
-        		rt_ioctl_giwencode(net_dev, NULL, erq, erq->pointer);
-			break;
-		}
-        case SIOCSIWENCODE:  //set encoding token & mode
-        {
-        	struct iw_point *erq=&wrq->u.encoding;
-        	if(erq->pointer)
-        		rt_ioctl_siwencode(net_dev, NULL, erq, erq->pointer);
-			break;
-		}
-		case SIOCGIWAP:     //get access point MAC addresses
-        {
-        	struct sockaddr *ap_addr=&wrq->u.ap_addr;
-        	rt_ioctl_giwap(net_dev, NULL, ap_addr, ap_addr->sa_data);
-			break;
-		}
-	    case SIOCSIWAP:  //set access point MAC addresses
-        {
-        	struct sockaddr *ap_addr=&wrq->u.ap_addr;
-        	rt_ioctl_siwap(net_dev, NULL, ap_addr, ap_addr->sa_data);
-			break;
-		}
-		case SIOCGIWMODE:   //get operation mode
-        {
-        	__u32 *mode=&wrq->u.mode;
-        	rt_ioctl_giwmode(net_dev, NULL, mode, NULL);
-			break;
-		}
-		case SIOCSIWMODE:   //set operation mode
-        {
-        	__u32 *mode=&wrq->u.mode;
-        	rt_ioctl_siwmode(net_dev, NULL, mode, NULL);
-			break;
-		}
-		case SIOCGIWSENS:   //get sensitivity (dBm)
-		case SIOCSIWSENS:	//set sensitivity (dBm)
-		case SIOCGIWPOWER:  //get Power Management settings
-		case SIOCSIWPOWER:  //set Power Management settings
-		case SIOCGIWTXPOW:  //get transmit power (dBm)
-		case SIOCSIWTXPOW:  //set transmit power (dBm)
-		case SIOCGIWRANGE:	//Get range of parameters
-		case SIOCGIWRETRY:	//get retry limits and lifetime
-		case SIOCSIWRETRY:	//set retry limits and lifetime
-			Status = -EOPNOTSUPP;
-			break;
-		case RT_PRIV_IOCTL:
-        case RT_PRIV_IOCTL_EXT:
-			subcmd = wrq->u.data.flags;
-			if( subcmd & OID_GET_SET_TOGGLE)
-				Status = RTMPSetInformation(pAd, rq, subcmd);
-			else
-				Status = RTMPQueryInformation(pAd, rq, subcmd);
-			break;
-		case SIOCGIWPRIV:
-			if (wrq->u.data.pointer)
-			{
-				if ( access_ok(VERIFY_WRITE, wrq->u.data.pointer, sizeof(privtab)) != TRUE)
-					break;
-				wrq->u.data.length = sizeof(privtab) / sizeof(privtab[0]);
-				if (copy_to_user(wrq->u.data.pointer, privtab, sizeof(privtab)))
-					Status = -EFAULT;
-			}
-			break;
-		case RTPRIV_IOCTL_SET:
-			if(access_ok(VERIFY_READ, wrq->u.data.pointer, wrq->u.data.length) != TRUE)
-				break;
-			rt_ioctl_setparam(net_dev, NULL, NULL, wrq->u.data.pointer);
-			break;
-		case RTPRIV_IOCTL_GSITESURVEY:
-			RTMPIoctlGetSiteSurvey(pAd, wrq);
-		    break;
-#ifdef DBG
-		case RTPRIV_IOCTL_MAC:
-			RTMPIoctlMAC(pAd, wrq);
-			break;
-		case RTPRIV_IOCTL_E2P:
-			RTMPIoctlE2PROM(pAd, wrq);
-			break;
-#ifdef RT30xx
-		case RTPRIV_IOCTL_RF:
-			RTMPIoctlRF(pAd, wrq);
-			break;
-#endif // RT30xx //
-#endif // DBG //
-        case SIOCETHTOOL:
-                break;
-		default:
-			DBGPRINT(RT_DEBUG_ERROR, ("IOCTL::unknown IOCTL's cmd = 0x%08x\n", cmd));
-			Status = -EOPNOTSUPP;
-			break;
-	}
-
-    if(StateMachineTouched) // Upper layer sent a MLME-related operations
-    	RT28XX_MLME_HANDLER(pAd);
-
-	return Status;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set SSID
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_SSID_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    NDIS_802_11_SSID                    Ssid, *pSsid=NULL;
-    BOOLEAN                             StateMachineTouched = FALSE;
-    int                                 success = TRUE;
-
-    if( strlen(arg) <= MAX_LEN_OF_SSID)
-    {
-        NdisZeroMemory(&Ssid, sizeof(NDIS_802_11_SSID));
-        if (strlen(arg) != 0)
-        {
-            NdisMoveMemory(Ssid.Ssid, arg, strlen(arg));
-            Ssid.SsidLength = strlen(arg);
-        }
-        else   //ANY ssid
-        {
-            Ssid.SsidLength = 0;
-		    memcpy(Ssid.Ssid, "", 0);
-			pAdapter->StaCfg.BssType = BSS_INFRA;
-			pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
-	        pAdapter->StaCfg.WepStatus  = Ndis802_11EncryptionDisabled;
-		}
-        pSsid = &Ssid;
-
-        if (pAdapter->Mlme.CntlMachine.CurrState != CNTL_IDLE)
-        {
-            RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-            DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
-        }
-
-        pAdapter->MlmeAux.CurrReqIsFromNdis = TRUE;
-        pAdapter->StaCfg.bScanReqIsFromWebUI = FALSE;
-		pAdapter->bConfigChanged = TRUE;
-
-        MlmeEnqueue(pAdapter,
-                    MLME_CNTL_STATE_MACHINE,
-                    OID_802_11_SSID,
-                    sizeof(NDIS_802_11_SSID),
-                    (VOID *)pSsid);
-
-        StateMachineTouched = TRUE;
-        DBGPRINT(RT_DEBUG_TRACE, ("Set_SSID_Proc::(Len=%d,Ssid=%s)\n", Ssid.SsidLength, Ssid.Ssid));
-    }
-    else
-        success = FALSE;
-
-    if (StateMachineTouched) // Upper layer sent a MLME-related operations
-    	RT28XX_MLME_HANDLER(pAdapter);
-
-    return success;
-}
-
-#ifdef WMM_SUPPORT
-/*
-    ==========================================================================
-    Description:
-        Set WmmCapable Enable or Disable
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT	Set_WmmCapable_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-	BOOLEAN	bWmmCapable;
-
-	bWmmCapable = simple_strtol(arg, 0, 10);
-
-	if ((bWmmCapable == 1)
-#ifdef RT2870
-		&& (pAd->NumberOfPipes >= 5)
-#endif // RT2870 //
-		)
-		pAd->CommonCfg.bWmmCapable = TRUE;
-	else if (bWmmCapable == 0)
-		pAd->CommonCfg.bWmmCapable = FALSE;
-	else
-		return FALSE;  //Invalid argument
-
-	DBGPRINT(RT_DEBUG_TRACE, ("Set_WmmCapable_Proc::(bWmmCapable=%d)\n",
-		pAd->CommonCfg.bWmmCapable));
-
-	return TRUE;
-}
-#endif // WMM_SUPPORT //
-
-/*
-    ==========================================================================
-    Description:
-        Set Network Type(Infrastructure/Adhoc mode)
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_NetworkType_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    UINT32	Value = 0;
-
-    if (strcmp(arg, "Adhoc") == 0)
-	{
-		if (pAdapter->StaCfg.BssType != BSS_ADHOC)
-		{
-			// Config has changed
-			pAdapter->bConfigChanged = TRUE;
-            if (MONITOR_ON(pAdapter))
-            {
-                RTMP_IO_WRITE32(pAdapter, RX_FILTR_CFG, STANORMAL);
-                RTMP_IO_READ32(pAdapter, MAC_SYS_CTRL, &Value);
-				Value &= (~0x80);
-				RTMP_IO_WRITE32(pAdapter, MAC_SYS_CTRL, Value);
-                OPSTATUS_CLEAR_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED);
-                pAdapter->StaCfg.bAutoReconnect = TRUE;
-                LinkDown(pAdapter, FALSE);
-            }
-			if (INFRA_ON(pAdapter))
-			{
-				//BOOLEAN Cancelled;
-				// Set the AutoReconnectSsid to prevent it reconnect to old SSID
-				// Since calling this indicate user don't want to connect to that SSID anymore.
-				pAdapter->MlmeAux.AutoReconnectSsidLen= 32;
-				NdisZeroMemory(pAdapter->MlmeAux.AutoReconnectSsid, pAdapter->MlmeAux.AutoReconnectSsidLen);
-
-				LinkDown(pAdapter, FALSE);
-
-				DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event BB!\n"));
-			}
-		}
-		pAdapter->StaCfg.BssType = BSS_ADHOC;
-        pAdapter->net_dev->type = pAdapter->StaCfg.OriDevType;
-		DBGPRINT(RT_DEBUG_TRACE, ("===>Set_NetworkType_Proc::(AD-HOC)\n"));
-	}
-    else if (strcmp(arg, "Infra") == 0)
-	{
-		if (pAdapter->StaCfg.BssType != BSS_INFRA)
-		{
-			// Config has changed
-			pAdapter->bConfigChanged = TRUE;
-            if (MONITOR_ON(pAdapter))
-            {
-                RTMP_IO_WRITE32(pAdapter, RX_FILTR_CFG, STANORMAL);
-                RTMP_IO_READ32(pAdapter, MAC_SYS_CTRL, &Value);
-				Value &= (~0x80);
-				RTMP_IO_WRITE32(pAdapter, MAC_SYS_CTRL, Value);
-                OPSTATUS_CLEAR_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED);
-                pAdapter->StaCfg.bAutoReconnect = TRUE;
-                LinkDown(pAdapter, FALSE);
-            }
-			if (ADHOC_ON(pAdapter))
-			{
-				// Set the AutoReconnectSsid to prevent it reconnect to old SSID
-				// Since calling this indicate user don't want to connect to that SSID anymore.
-				pAdapter->MlmeAux.AutoReconnectSsidLen= 32;
-				NdisZeroMemory(pAdapter->MlmeAux.AutoReconnectSsid, pAdapter->MlmeAux.AutoReconnectSsidLen);
-
-				LinkDown(pAdapter, FALSE);
-			}
-		}
-		pAdapter->StaCfg.BssType = BSS_INFRA;
-        pAdapter->net_dev->type = pAdapter->StaCfg.OriDevType;
-		DBGPRINT(RT_DEBUG_TRACE, ("===>Set_NetworkType_Proc::(INFRA)\n"));
-
-        pAdapter->StaCfg.BssType = BSS_INFRA;
-	}
-    else if (strcmp(arg, "Monitor") == 0)
-    {
-		UCHAR	bbpValue = 0;
-		BCN_TIME_CFG_STRUC csr;
-		OPSTATUS_CLEAR_FLAG(pAdapter, fOP_STATUS_INFRA_ON);
-        OPSTATUS_CLEAR_FLAG(pAdapter, fOP_STATUS_ADHOC_ON);
-		OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED);
-		// disable all periodic state machine
-		pAdapter->StaCfg.bAutoReconnect = FALSE;
-		// reset all mlme state machine
-		RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-		DBGPRINT(RT_DEBUG_TRACE, ("fOP_STATUS_MEDIA_STATE_CONNECTED \n"));
-        if (pAdapter->CommonCfg.CentralChannel == 0)
-        {
-#ifdef DOT11_N_SUPPORT
-            if (pAdapter->CommonCfg.PhyMode == PHY_11AN_MIXED)
-                pAdapter->CommonCfg.CentralChannel = 36;
-            else
-#endif // DOT11_N_SUPPORT //
-                pAdapter->CommonCfg.CentralChannel = 6;
-        }
-#ifdef DOT11_N_SUPPORT
-        else
-            N_ChannelCheck(pAdapter);
-#endif // DOT11_N_SUPPORT //
-
-#ifdef DOT11_N_SUPPORT
-	if (pAdapter->CommonCfg.PhyMode >= PHY_11ABGN_MIXED &&
-            pAdapter->CommonCfg.RegTransmitSetting.field.BW == BW_40 &&
-            pAdapter->CommonCfg.RegTransmitSetting.field.EXTCHA == EXTCHA_ABOVE)
-		{
-			// 40MHz ,control channel at lower
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R4, &bbpValue);
-			bbpValue &= (~0x18);
-			bbpValue |= 0x10;
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R4, bbpValue);
-			pAdapter->CommonCfg.BBPCurrentBW = BW_40;
-			//  RX : control channel at lower
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R3, &bbpValue);
-			bbpValue &= (~0x20);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R3, bbpValue);
-
-			RTMP_IO_READ32(pAdapter, TX_BAND_CFG, &Value);
-			Value &= 0xfffffffe;
-			RTMP_IO_WRITE32(pAdapter, TX_BAND_CFG, Value);
-			pAdapter->CommonCfg.CentralChannel = pAdapter->CommonCfg.Channel + 2;
-            AsicSwitchChannel(pAdapter, pAdapter->CommonCfg.CentralChannel, FALSE);
-		    AsicLockChannel(pAdapter, pAdapter->CommonCfg.CentralChannel);
-            DBGPRINT(RT_DEBUG_TRACE, ("BW_40 ,control_channel(%d), CentralChannel(%d) \n",
-                                       pAdapter->CommonCfg.Channel,
-                                       pAdapter->CommonCfg.CentralChannel));
-		}
-		else if (pAdapter->CommonCfg.PhyMode >= PHY_11ABGN_MIXED &&
-                 pAdapter->CommonCfg.RegTransmitSetting.field.BW == BW_40 &&
-                 pAdapter->CommonCfg.RegTransmitSetting.field.EXTCHA == EXTCHA_BELOW)
-		{
-			// 40MHz ,control channel at upper
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R4, &bbpValue);
-			bbpValue &= (~0x18);
-			bbpValue |= 0x10;
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R4, bbpValue);
-			pAdapter->CommonCfg.BBPCurrentBW = BW_40;
-			RTMP_IO_READ32(pAdapter, TX_BAND_CFG, &Value);
-			Value |= 0x1;
-			RTMP_IO_WRITE32(pAdapter, TX_BAND_CFG, Value);
-
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R3, &bbpValue);
-			bbpValue |= (0x20);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R3, bbpValue);
-			pAdapter->CommonCfg.CentralChannel = pAdapter->CommonCfg.Channel - 2;
-            AsicSwitchChannel(pAdapter, pAdapter->CommonCfg.CentralChannel, FALSE);
-		    AsicLockChannel(pAdapter, pAdapter->CommonCfg.CentralChannel);
-            DBGPRINT(RT_DEBUG_TRACE, ("BW_40 ,control_channel(%d), CentralChannel(%d) \n",
-                                       pAdapter->CommonCfg.Channel,
-                                       pAdapter->CommonCfg.CentralChannel));
-		}
-		else
-#endif // DOT11_N_SUPPORT //
-		{
-			// 20MHz
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R4, &bbpValue);
-			bbpValue &= (~0x18);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R4, bbpValue);
-			pAdapter->CommonCfg.BBPCurrentBW = BW_20;
-			AsicSwitchChannel(pAdapter, pAdapter->CommonCfg.Channel, FALSE);
-			AsicLockChannel(pAdapter, pAdapter->CommonCfg.Channel);
-			DBGPRINT(RT_DEBUG_TRACE, ("BW_20, Channel(%d)\n", pAdapter->CommonCfg.Channel));
-		}
-		// Enable Rx with promiscuous reception
-		RTMP_IO_WRITE32(pAdapter, RX_FILTR_CFG, 0x3);
-		// ASIC supporsts sniffer function with replacing RSSI with timestamp.
-		//RTMP_IO_READ32(pAdapter, MAC_SYS_CTRL, &Value);
-		//Value |= (0x80);
-		//RTMP_IO_WRITE32(pAdapter, MAC_SYS_CTRL, Value);
-		// disable sync
-		RTMP_IO_READ32(pAdapter, BCN_TIME_CFG, &csr.word);
-		csr.field.bBeaconGen = 0;
-		csr.field.bTBTTEnable = 0;
-		csr.field.TsfSyncMode = 0;
-		RTMP_IO_WRITE32(pAdapter, BCN_TIME_CFG, csr.word);
-
-		pAdapter->StaCfg.BssType = BSS_MONITOR;
-        pAdapter->net_dev->type = ARPHRD_IEEE80211_PRISM; //ARPHRD_IEEE80211; // IEEE80211
-		DBGPRINT(RT_DEBUG_TRACE, ("===>Set_NetworkType_Proc::(MONITOR)\n"));
-    }
-
-    // Reset Ralink supplicant to not use, it will be set to start when UI set PMK key
-    pAdapter->StaCfg.WpaState = SS_NOTUSE;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_NetworkType_Proc::(NetworkType=%d)\n", pAdapter->StaCfg.BssType));
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Authentication mode
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_AuthMode_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    if ((strcmp(arg, "WEPAUTO") == 0) || (strcmp(arg, "wepauto") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeAutoSwitch;
-    else if ((strcmp(arg, "OPEN") == 0) || (strcmp(arg, "open") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
-    else if ((strcmp(arg, "SHARED") == 0) || (strcmp(arg, "shared") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeShared;
-    else if ((strcmp(arg, "WPAPSK") == 0) || (strcmp(arg, "wpapsk") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPAPSK;
-    else if ((strcmp(arg, "WPANONE") == 0) || (strcmp(arg, "wpanone") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPANone;
-    else if ((strcmp(arg, "WPA2PSK") == 0) || (strcmp(arg, "wpa2psk") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2PSK;
-#ifdef WPA_SUPPLICANT_SUPPORT
-    else if ((strcmp(arg, "WPA") == 0) || (strcmp(arg, "wpa") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA;
-    else if ((strcmp(arg, "WPA2") == 0) || (strcmp(arg, "wpa2") == 0))
-        pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2;
-#endif // WPA_SUPPLICANT_SUPPORT //
-    else
-        return FALSE;
-
-    pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_AuthMode_Proc::(AuthMode=%d)\n", pAdapter->StaCfg.AuthMode));
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Encryption Type
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_EncrypType_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    if ((strcmp(arg, "NONE") == 0) || (strcmp(arg, "none") == 0))
-    {
-        if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-            return TRUE;    // do nothing
-
-        pAdapter->StaCfg.WepStatus     = Ndis802_11WEPDisabled;
-        pAdapter->StaCfg.PairCipher    = Ndis802_11WEPDisabled;
-	    pAdapter->StaCfg.GroupCipher   = Ndis802_11WEPDisabled;
-    }
-    else if ((strcmp(arg, "WEP") == 0) || (strcmp(arg, "wep") == 0))
-    {
-        if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-            return TRUE;    // do nothing
-
-        pAdapter->StaCfg.WepStatus     = Ndis802_11WEPEnabled;
-        pAdapter->StaCfg.PairCipher    = Ndis802_11WEPEnabled;
-	    pAdapter->StaCfg.GroupCipher   = Ndis802_11WEPEnabled;
-    }
-    else if ((strcmp(arg, "TKIP") == 0) || (strcmp(arg, "tkip") == 0))
-    {
-        if (pAdapter->StaCfg.AuthMode < Ndis802_11AuthModeWPA)
-            return TRUE;    // do nothing
-
-        pAdapter->StaCfg.WepStatus     = Ndis802_11Encryption2Enabled;
-        pAdapter->StaCfg.PairCipher    = Ndis802_11Encryption2Enabled;
-	    pAdapter->StaCfg.GroupCipher   = Ndis802_11Encryption2Enabled;
-    }
-    else if ((strcmp(arg, "AES") == 0) || (strcmp(arg, "aes") == 0))
-    {
-        if (pAdapter->StaCfg.AuthMode < Ndis802_11AuthModeWPA)
-            return TRUE;    // do nothing
-
-        pAdapter->StaCfg.WepStatus     = Ndis802_11Encryption3Enabled;
-        pAdapter->StaCfg.PairCipher    = Ndis802_11Encryption3Enabled;
-	    pAdapter->StaCfg.GroupCipher   = Ndis802_11Encryption3Enabled;
-    }
-    else
-        return FALSE;
-
-    pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_EncrypType_Proc::(EncrypType=%d)\n", pAdapter->StaCfg.WepStatus));
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Default Key ID
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_DefaultKeyID_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    ULONG                               KeyIdx;
-
-    KeyIdx = simple_strtol(arg, 0, 10);
-    if((KeyIdx >= 1 ) && (KeyIdx <= 4))
-        pAdapter->StaCfg.DefaultKeyId = (UCHAR) (KeyIdx - 1 );
-    else
-        return FALSE;  //Invalid argument
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_DefaultKeyID_Proc::(DefaultKeyID=%d)\n", pAdapter->StaCfg.DefaultKeyId));
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set WEP KEY1
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_Key1_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    int                                 KeyLen;
-    int                                 i;
-    UCHAR                               CipherAlg=CIPHER_WEP64;
-
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        return TRUE;    // do nothing
-
-    KeyLen = strlen(arg);
-
-    switch (KeyLen)
-    {
-        case 5: //wep 40 Ascii type
-            pAdapter->SharedKey[BSS0][0].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][0].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::(Key1=%s and type=%s)\n", arg, "Ascii"));
-            break;
-        case 10: //wep 40 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][0].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][0].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::(Key1=%s and type=%s)\n", arg, "Hex"));
-            break;
-        case 13: //wep 104 Ascii type
-            pAdapter->SharedKey[BSS0][0].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][0].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::(Key1=%s and type=%s)\n", arg, "Ascii"));
-            break;
-        case 26: //wep 104 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][0].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][0].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::(Key1=%s and type=%s)\n", arg, "Hex"));
-            break;
-        default: //Invalid argument
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::Invalid argument (=%s)\n", arg));
-            return FALSE;
-    }
-
-    pAdapter->SharedKey[BSS0][0].CipherAlg = CipherAlg;
-
-    // Set keys (into ASIC)
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        ;   // not support
-    else    // Old WEP stuff
-    {
-        AsicAddSharedKeyEntry(pAdapter,
-                              0,
-                              0,
-                              pAdapter->SharedKey[BSS0][0].CipherAlg,
-                              pAdapter->SharedKey[BSS0][0].Key,
-                              NULL,
-                              NULL);
-    }
-
-    return TRUE;
-}
-/*
-    ==========================================================================
-
-    Description:
-        Set WEP KEY2
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_Key2_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    int                                 KeyLen;
-    int                                 i;
-    UCHAR                               CipherAlg=CIPHER_WEP64;
-
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        return TRUE;    // do nothing
-
-    KeyLen = strlen(arg);
-
-    switch (KeyLen)
-    {
-        case 5: //wep 40 Ascii type
-            pAdapter->SharedKey[BSS0][1].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][1].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::(Key2=%s and type=%s)\n", arg, "Ascii"));
-            break;
-        case 10: //wep 40 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][1].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][1].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::(Key2=%s and type=%s)\n", arg, "Hex"));
-            break;
-        case 13: //wep 104 Ascii type
-            pAdapter->SharedKey[BSS0][1].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][1].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::(Key2=%s and type=%s)\n", arg, "Ascii"));
-            break;
-        case 26: //wep 104 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][1].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][1].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::(Key2=%s and type=%s)\n", arg, "Hex"));
-            break;
-        default: //Invalid argument
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::Invalid argument (=%s)\n", arg));
-            return FALSE;
-    }
-    pAdapter->SharedKey[BSS0][1].CipherAlg = CipherAlg;
-
-    // Set keys (into ASIC)
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        ;   // not support
-    else    // Old WEP stuff
-    {
-        AsicAddSharedKeyEntry(pAdapter,
-                              0,
-                              1,
-                              pAdapter->SharedKey[BSS0][1].CipherAlg,
-                              pAdapter->SharedKey[BSS0][1].Key,
-                              NULL,
-                              NULL);
-    }
-
-    return TRUE;
-}
-/*
-    ==========================================================================
-    Description:
-        Set WEP KEY3
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_Key3_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    int                                 KeyLen;
-    int                                 i;
-    UCHAR                               CipherAlg=CIPHER_WEP64;
-
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        return TRUE;    // do nothing
-
-    KeyLen = strlen(arg);
-
-    switch (KeyLen)
-    {
-        case 5: //wep 40 Ascii type
-            pAdapter->SharedKey[BSS0][2].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][2].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::(Key3=%s and type=Ascii)\n", arg));
-            break;
-        case 10: //wep 40 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][2].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][2].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::(Key3=%s and type=Hex)\n", arg));
-            break;
-        case 13: //wep 104 Ascii type
-            pAdapter->SharedKey[BSS0][2].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][2].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::(Key3=%s and type=Ascii)\n", arg));
-            break;
-        case 26: //wep 104 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][2].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][2].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::(Key3=%s and type=Hex)\n", arg));
-            break;
-        default: //Invalid argument
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::Invalid argument (=%s)\n", arg));
-            return FALSE;
-    }
-    pAdapter->SharedKey[BSS0][2].CipherAlg = CipherAlg;
-
-    // Set keys (into ASIC)
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        ;   // not support
-    else    // Old WEP stuff
-    {
-        AsicAddSharedKeyEntry(pAdapter,
-                              0,
-                              2,
-                              pAdapter->SharedKey[BSS0][2].CipherAlg,
-                              pAdapter->SharedKey[BSS0][2].Key,
-                              NULL,
-                              NULL);
-    }
-
-    return TRUE;
-}
-/*
-    ==========================================================================
-    Description:
-        Set WEP KEY4
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_Key4_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    int                                 KeyLen;
-    int                                 i;
-    UCHAR                               CipherAlg=CIPHER_WEP64;
-
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        return TRUE;    // do nothing
-
-    KeyLen = strlen(arg);
-
-    switch (KeyLen)
-    {
-        case 5: //wep 40 Ascii type
-            pAdapter->SharedKey[BSS0][3].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][3].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::(Key4=%s and type=%s)\n", arg, "Ascii"));
-            break;
-        case 10: //wep 40 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][3].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][3].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP64;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::(Key4=%s and type=%s)\n", arg, "Hex"));
-            break;
-        case 13: //wep 104 Ascii type
-            pAdapter->SharedKey[BSS0][3].KeyLen = KeyLen;
-            memcpy(pAdapter->SharedKey[BSS0][3].Key, arg, KeyLen);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::(Key4=%s and type=%s)\n", arg, "Ascii"));
-            break;
-        case 26: //wep 104 Hex type
-            for(i=0; i < KeyLen; i++)
-            {
-                if( !isxdigit(*(arg+i)) )
-                    return FALSE;  //Not Hex value;
-            }
-            pAdapter->SharedKey[BSS0][3].KeyLen = KeyLen / 2 ;
-            AtoH(arg, pAdapter->SharedKey[BSS0][3].Key, KeyLen / 2);
-            CipherAlg = CIPHER_WEP128;
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::(Key4=%s and type=%s)\n", arg, "Hex"));
-            break;
-        default: //Invalid argument
-            DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::Invalid argument (=%s)\n", arg));
-            return FALSE;
-    }
-    pAdapter->SharedKey[BSS0][3].CipherAlg = CipherAlg;
-
-    // Set keys (into ASIC)
-    if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-        ;   // not support
-    else    // Old WEP stuff
-    {
-        AsicAddSharedKeyEntry(pAdapter,
-                              0,
-                              3,
-                              pAdapter->SharedKey[BSS0][3].CipherAlg,
-                              pAdapter->SharedKey[BSS0][3].Key,
-                              NULL,
-                              NULL);
-    }
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set WPA PSK key
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_WPAPSK_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    UCHAR                   keyMaterial[40];
-
-    if ((pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPAPSK) &&
-        (pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPA2PSK) &&
-	    (pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPANone)
-		)
-        return TRUE;    // do nothing
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_WPAPSK_Proc::(WPAPSK=%s)\n", arg));
-
-    NdisZeroMemory(keyMaterial, 40);
-
-    if ((strlen(arg) < 8) || (strlen(arg) > 64))
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("Set failed!!(WPAPSK=%s), WPAPSK key-string required 8 ~ 64 characters \n", arg));
-        return FALSE;
-    }
-
-    if (strlen(arg) == 64)
-    {
-        AtoH(arg, keyMaterial, 32);
-        NdisMoveMemory(pAdapter->StaCfg.PMK, keyMaterial, 32);
-
-    }
-    else
-    {
-        PasswordHash((char *)arg, pAdapter->MlmeAux.Ssid, pAdapter->MlmeAux.SsidLen, keyMaterial);
-        NdisMoveMemory(pAdapter->StaCfg.PMK, keyMaterial, 32);
-    }
-
-
-
-    if(pAdapter->StaCfg.BssType == BSS_ADHOC &&
-       pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
-    {
-         pAdapter->StaCfg.WpaState = SS_NOTUSE;
-    }
-    else
-    {
-        // Start STA supplicant state machine
-        pAdapter->StaCfg.WpaState = SS_START;
-    }
-
-    return TRUE;
-}
-
-/*
-    ==========================================================================
-    Description:
-        Set Power Saving mode
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_PSMode_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    if (pAdapter->StaCfg.BssType == BSS_INFRA)
-    {
-        if ((strcmp(arg, "Max_PSP") == 0) ||
-			(strcmp(arg, "max_psp") == 0) ||
-			(strcmp(arg, "MAX_PSP") == 0))
-        {
-            // do NOT turn on PSM bit here, wait until MlmeCheckForPsmChange()
-            // to exclude certain situations.
-            if (pAdapter->StaCfg.bWindowsACCAMEnable == FALSE)
-                pAdapter->StaCfg.WindowsPowerMode = Ndis802_11PowerModeMAX_PSP;
-            pAdapter->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeMAX_PSP;
-            OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_RECEIVE_DTIM);
-            pAdapter->StaCfg.DefaultListenCount = 5;
-
-        }
-        else if ((strcmp(arg, "Fast_PSP") == 0) ||
-				 (strcmp(arg, "fast_psp") == 0) ||
-                 (strcmp(arg, "FAST_PSP") == 0))
-        {
-            // do NOT turn on PSM bit here, wait until MlmeCheckForPsmChange()
-            // to exclude certain situations.
-            OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_RECEIVE_DTIM);
-            if (pAdapter->StaCfg.bWindowsACCAMEnable == FALSE)
-                pAdapter->StaCfg.WindowsPowerMode = Ndis802_11PowerModeFast_PSP;
-            pAdapter->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeFast_PSP;
-            pAdapter->StaCfg.DefaultListenCount = 3;
-        }
-        else if ((strcmp(arg, "Legacy_PSP") == 0) ||
-                 (strcmp(arg, "legacy_psp") == 0) ||
-                 (strcmp(arg, "LEGACY_PSP") == 0))
-        {
-            // do NOT turn on PSM bit here, wait until MlmeCheckForPsmChange()
-            // to exclude certain situations.
-            OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_RECEIVE_DTIM);
-            if (pAdapter->StaCfg.bWindowsACCAMEnable == FALSE)
-                pAdapter->StaCfg.WindowsPowerMode = Ndis802_11PowerModeLegacy_PSP;
-            pAdapter->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeLegacy_PSP;
-            pAdapter->StaCfg.DefaultListenCount = 3;
-        }
-        else
-        {
-            //Default Ndis802_11PowerModeCAM
-            // clear PSM bit immediately
-            MlmeSetPsmBit(pAdapter, PWR_ACTIVE);
-            OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_RECEIVE_DTIM);
-            if (pAdapter->StaCfg.bWindowsACCAMEnable == FALSE)
-                pAdapter->StaCfg.WindowsPowerMode = Ndis802_11PowerModeCAM;
-            pAdapter->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeCAM;
-        }
-
-        DBGPRINT(RT_DEBUG_TRACE, ("Set_PSMode_Proc::(PSMode=%ld)\n", pAdapter->StaCfg.WindowsPowerMode));
-    }
-    else
-        return FALSE;
-
-
-    return TRUE;
-}
-
-#ifdef WPA_SUPPLICANT_SUPPORT
-/*
-    ==========================================================================
-    Description:
-        Set WpaSupport flag.
-    Value:
-        0: Driver ignore wpa_supplicant.
-        1: wpa_supplicant initiates scanning and AP selection.
-        2: driver takes care of scanning, AP selection, and IEEE 802.11 association parameters.
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
-*/
-INT Set_Wpa_Support(
-    IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg)
-{
-
-    if ( simple_strtol(arg, 0, 10) == 0)
-        pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_DISABLE;
-    else if ( simple_strtol(arg, 0, 10) == 1)
-        pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_ENABLE;
-    else if ( simple_strtol(arg, 0, 10) == 2)
-        pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_ENABLE_WITH_WEB_UI;
-    else
-        pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_DISABLE;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_Wpa_Support::(WpaSupplicantUP=%d)\n", pAd->StaCfg.WpaSupplicantUP));
-
-    return TRUE;
-}
-#endif // WPA_SUPPLICANT_SUPPORT //
-
-#ifdef DBG
-/*
-    ==========================================================================
-    Description:
-        Read / Write MAC
-    Arguments:
-        pAdapter                    Pointer to our adapter
-        wrq                         Pointer to the ioctl argument
-
-    Return Value:
-        None
-
-    Note:
-        Usage:
-               1.) iwpriv ra0 mac 0        ==> read MAC where Addr=0x0
-               2.) iwpriv ra0 mac 0=12     ==> write MAC where Addr=0x0, value=12
-    ==========================================================================
-*/
-VOID RTMPIoctlMAC(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq)
-{
-	CHAR				*this_char;
-	CHAR				*value;
-	INT					j = 0, k = 0;
-	CHAR				msg[1024];
-	CHAR				arg[255];
-	ULONG				macAddr = 0;
-	UCHAR				temp[16], temp2[16];
-	UINT32				macValue = 0;
-	INT					Status;
-	BOOLEAN				bIsPrintAllMAC = FALSE;
-
-
-	memset(msg, 0x00, 1024);
-	if (wrq->u.data.length > 1) //No parameters.
-	{
-	    Status = copy_from_user(arg, wrq->u.data.pointer, (wrq->u.data.length > 255) ? 255 : wrq->u.data.length);
-		sprintf(msg, "\n");
-
-		//Parsing Read or Write
-	    this_char = arg;
-		if (!*this_char)
-			goto next;
-
-		if ((value = rtstrchr(this_char, '=')) != NULL)
-			*value++ = 0;
-
-		if (!value || !*value)
-		{ //Read
-			// Sanity check
-			if(strlen(this_char) > 4)
-				goto next;
-
-			j = strlen(this_char);
-			while(j-- > 0)
-			{
-				if(this_char[j] > 'f' || this_char[j] < '0')
-					return;
-			}
-
-			// Mac Addr
-			k = j = strlen(this_char);
-			while(j-- > 0)
-			{
-				this_char[4-k+j] = this_char[j];
-			}
-
-			while(k < 4)
-				this_char[3-k++]='0';
-			this_char[4]='\0';
-
-			if(strlen(this_char) == 4)
-			{
-				AtoH(this_char, temp, 2);
-				macAddr = *temp*256 + temp[1];
-				if (macAddr < 0xFFFF)
-				{
-					RTMP_IO_READ32(pAdapter, macAddr, &macValue);
-					DBGPRINT(RT_DEBUG_TRACE, ("MacAddr=%lx, MacValue=%x\n", macAddr, macValue));
-					sprintf(msg+strlen(msg), "[0x%08lX]:%08X  ", macAddr , macValue);
-				}
-				else
-				{//Invalid parametes, so default printk all mac
-					bIsPrintAllMAC = TRUE;
-					goto next;
-				}
-			}
-		}
-		else
-		{ //Write
-			memcpy(&temp2, value, strlen(value));
-			temp2[strlen(value)] = '\0';
-
-			// Sanity check
-			if((strlen(this_char) > 4) || strlen(temp2) > 8)
-				goto next;
-
-			j = strlen(this_char);
-			while(j-- > 0)
-			{
-				if(this_char[j] > 'f' || this_char[j] < '0')
-					return;
-			}
-
-			j = strlen(temp2);
-			while(j-- > 0)
-			{
-				if(temp2[j] > 'f' || temp2[j] < '0')
-					return;
-			}
-
-			//MAC Addr
-			k = j = strlen(this_char);
-			while(j-- > 0)
-			{
-				this_char[4-k+j] = this_char[j];
-			}
-
-			while(k < 4)
-				this_char[3-k++]='0';
-			this_char[4]='\0';
-
-			//MAC value
-			k = j = strlen(temp2);
-			while(j-- > 0)
-			{
-				temp2[8-k+j] = temp2[j];
-			}
-
-			while(k < 8)
-				temp2[7-k++]='0';
-			temp2[8]='\0';
-
-			{
-				AtoH(this_char, temp, 2);
-				macAddr = *temp*256 + temp[1];
-
-				AtoH(temp2, temp, 4);
-				macValue = *temp*256*256*256 + temp[1]*256*256 + temp[2]*256 + temp[3];
-
-				// debug mode
-				if (macAddr == (HW_DEBUG_SETTING_BASE + 4))
-				{
-					// 0x2bf4: byte0 non-zero: enable R17 tuning, 0: disable R17 tuning
-                    if (macValue & 0x000000ff)
-                    {
-                        pAdapter->BbpTuning.bEnable = TRUE;
-                        DBGPRINT(RT_DEBUG_TRACE,("turn on R17 tuning\n"));
-                    }
-                    else
-                    {
-                        UCHAR R66;
-                        pAdapter->BbpTuning.bEnable = FALSE;
-                        R66 = 0x26 + GET_LNA_GAIN(pAdapter);
-#ifdef RALINK_ATE
-						if (ATE_ON(pAdapter))
-						{
-							ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R66, (0x26 + GET_LNA_GAIN(pAdapter)));
-						}
-						else
-#endif // RALINK_ATE //
-						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R66, (0x26 + GET_LNA_GAIN(pAdapter)));
-                        DBGPRINT(RT_DEBUG_TRACE,("turn off R17 tuning, restore to 0x%02x\n", R66));
-                    }
-					return;
-				}
-
-				DBGPRINT(RT_DEBUG_TRACE, ("MacAddr=%02lx, MacValue=0x%x\n", macAddr, macValue));
-
-				RTMP_IO_WRITE32(pAdapter, macAddr, macValue);
-				sprintf(msg+strlen(msg), "[0x%08lX]:%08X  ", macAddr, macValue);
-			}
-		}
-	}
-	else
-		bIsPrintAllMAC = TRUE;
-next:
-	if (bIsPrintAllMAC)
-	{
-		struct file		*file_w;
-		PCHAR			fileName = "MacDump.txt";
-		mm_segment_t	orig_fs;
-
-		orig_fs = get_fs();
-		set_fs(KERNEL_DS);
-
-		// open file
-		file_w = filp_open(fileName, O_WRONLY|O_CREAT, 0);
-		if (IS_ERR(file_w))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("-->2) %s: Error %ld opening %s\n", __FUNCTION__, -PTR_ERR(file_w), fileName));
-		}
-		else
-		{
-			if (file_w->f_op && file_w->f_op->write)
-			{
-				file_w->f_pos = 0;
-				macAddr = 0x1000;
-
-				while (macAddr <= 0x1800)
-				{
-					RTMP_IO_READ32(pAdapter, macAddr, &macValue);
-					sprintf(msg, "%08lx = %08X\n", macAddr, macValue);
-
-					// write data to file
-					file_w->f_op->write(file_w, msg, strlen(msg), &file_w->f_pos);
-
-					printk("%s", msg);
-					macAddr += 4;
-				}
-				sprintf(msg, "\nDump all MAC values to %s\n", fileName);
-			}
-			filp_close(file_w, NULL);
-		}
-		set_fs(orig_fs);
-	}
-	if(strlen(msg) == 1)
-		sprintf(msg+strlen(msg), "===>Error command format!");
-
-	// Copy the information into the user buffer
-	wrq->u.data.length = strlen(msg);
-	Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlMAC\n\n"));
-}
-
-/*
-    ==========================================================================
-    Description:
-        Read / Write E2PROM
-    Arguments:
-        pAdapter                    Pointer to our adapter
-        wrq                         Pointer to the ioctl argument
-
-    Return Value:
-        None
-
-    Note:
-        Usage:
-               1.) iwpriv ra0 e2p 0     	==> read E2PROM where Addr=0x0
-               2.) iwpriv ra0 e2p 0=1234    ==> write E2PROM where Addr=0x0, value=1234
-    ==========================================================================
-*/
-VOID RTMPIoctlE2PROM(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq)
-{
-	CHAR				*this_char;
-	CHAR				*value;
-	INT					j = 0, k = 0;
-	CHAR				msg[1024];
-	CHAR				arg[255];
-	USHORT				eepAddr = 0;
-	UCHAR				temp[16], temp2[16];
-	USHORT				eepValue;
-	int					Status;
-	BOOLEAN				bIsPrintAllE2P = FALSE;
-
-
-	memset(msg, 0x00, 1024);
-	if (wrq->u.data.length > 1) //No parameters.
-	{
-	    Status = copy_from_user(arg, wrq->u.data.pointer, (wrq->u.data.length > 255) ? 255 : wrq->u.data.length);
-		sprintf(msg, "\n");
-
-	    //Parsing Read or Write
-		this_char = arg;
-
-
-		if (!*this_char)
-			goto next;
-
-		if ((value = rtstrchr(this_char, '=')) != NULL)
-			*value++ = 0;
-
-		if (!value || !*value)
-		{ //Read
-
-			// Sanity check
-			if(strlen(this_char) > 4)
-				goto next;
-
-			j = strlen(this_char);
-			while(j-- > 0)
-			{
-				if(this_char[j] > 'f' || this_char[j] < '0')
-					return;
-			}
-
-			// E2PROM addr
-			k = j = strlen(this_char);
-			while(j-- > 0)
-			{
-				this_char[4-k+j] = this_char[j];
-			}
-
-			while(k < 4)
-				this_char[3-k++]='0';
-			this_char[4]='\0';
-
-			if(strlen(this_char) == 4)
-			{
-				AtoH(this_char, temp, 2);
-				eepAddr = *temp*256 + temp[1];
-				if (eepAddr < 0xFFFF)
-				{
-					RT28xx_EEPROM_READ16(pAdapter, eepAddr, eepValue);
-					sprintf(msg+strlen(msg), "[0x%04X]:0x%04X  ", eepAddr , eepValue);
-				}
-				else
-				{//Invalid parametes, so default printk all bbp
-					bIsPrintAllE2P = TRUE;
-					goto next;
-				}
-			}
-		}
-		else
-		{ //Write
-			memcpy(&temp2, value, strlen(value));
-			temp2[strlen(value)] = '\0';
-
-			// Sanity check
-			if((strlen(this_char) > 4) || strlen(temp2) > 8)
-				goto next;
-
-			j = strlen(this_char);
-			while(j-- > 0)
-			{
-				if(this_char[j] > 'f' || this_char[j] < '0')
-					return;
-			}
-			j = strlen(temp2);
-			while(j-- > 0)
-			{
-				if(temp2[j] > 'f' || temp2[j] < '0')
-					return;
-			}
-
-			//MAC Addr
-			k = j = strlen(this_char);
-			while(j-- > 0)
-			{
-				this_char[4-k+j] = this_char[j];
-			}
-
-			while(k < 4)
-				this_char[3-k++]='0';
-			this_char[4]='\0';
-
-			//MAC value
-			k = j = strlen(temp2);
-			while(j-- > 0)
-			{
-				temp2[4-k+j] = temp2[j];
-			}
-
-			while(k < 4)
-				temp2[3-k++]='0';
-			temp2[4]='\0';
-
-			AtoH(this_char, temp, 2);
-			eepAddr = *temp*256 + temp[1];
-
-			AtoH(temp2, temp, 2);
-			eepValue = *temp*256 + temp[1];
-
-			RT28xx_EEPROM_WRITE16(pAdapter, eepAddr, eepValue);
-			sprintf(msg+strlen(msg), "[0x%02X]:%02X  ", eepAddr, eepValue);
-		}
-	}
-	else
-		bIsPrintAllE2P = TRUE;
-next:
-	if (bIsPrintAllE2P)
-	{
-		struct file		*file_w;
-		PCHAR			fileName = "EEPROMDump.txt";
-		mm_segment_t	orig_fs;
-
-		orig_fs = get_fs();
-		set_fs(KERNEL_DS);
-
-		// open file
-		file_w = filp_open(fileName, O_WRONLY|O_CREAT, 0);
-		if (IS_ERR(file_w))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("-->2) %s: Error %ld opening %s\n", __FUNCTION__, -PTR_ERR(file_w), fileName));
-		}
-		else
-		{
-			if (file_w->f_op && file_w->f_op->write)
-			{
-				file_w->f_pos = 0;
-				eepAddr = 0x00;
-
-				while (eepAddr <= 0xFE)
-				{
-					RT28xx_EEPROM_READ16(pAdapter, eepAddr, eepValue);
-					sprintf(msg, "%08x = %04x\n", eepAddr , eepValue);
-
-					// write data to file
-					file_w->f_op->write(file_w, msg, strlen(msg), &file_w->f_pos);
-
-					printk("%s", msg);
-					eepAddr += 2;
-				}
-				sprintf(msg, "\nDump all EEPROM values to %s\n", fileName);
-			}
-			filp_close(file_w, NULL);
-		}
-		set_fs(orig_fs);
-	}
-	if(strlen(msg) == 1)
-		sprintf(msg+strlen(msg), "===>Error command format!");
-
-
-	// Copy the information into the user buffer
-	wrq->u.data.length = strlen(msg);
-	Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlE2PROM\n"));
-}
-#ifdef RT30xx
-/*
-    ==========================================================================
-    Description:
-        Read / Write RF register
-Arguments:
-    pAdapter                    Pointer to our adapter
-    wrq                         Pointer to the ioctl argument
-
-    Return Value:
-        None
-
-    Note:
-        Usage:
-               1.) iwpriv ra0 rf                ==> read all RF registers
-               2.) iwpriv ra0 rf 1              ==> read RF where RegID=1
-               3.) iwpriv ra0 rf 1=10		    ==> write RF R1=0x10
-    ==========================================================================
-*/
-VOID RTMPIoctlRF(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq)
-{
-	CHAR				*this_char;
-	CHAR				*value;
-	UCHAR				regRF = 0;
-	CHAR				msg[2048];
-	CHAR				arg[255];
-	INT					rfId;
-	LONG				rfValue;
-	int					Status;
-	BOOLEAN				bIsPrintAllRF = FALSE;
-
-
-	memset(msg, 0x00, 2048);
-	if (wrq->u.data.length > 1) //No parameters.
-	{
-	    Status = copy_from_user(arg, wrq->u.data.pointer, (wrq->u.data.length > 255) ? 255 : wrq->u.data.length);
-		sprintf(msg, "\n");
-
-	    //Parsing Read or Write
-		this_char = arg;
-		if (!*this_char)
-			goto next;
-
-		if ((value = strchr(this_char, '=')) != NULL)
-			*value++ = 0;
-
-		if (!value || !*value)
-		{ //Read
-			if (sscanf(this_char, "%d", &(rfId)) == 1)
-			{
-				if (rfId <= 31)
-				{
-					// In RT2860 ATE mode, we do not load 8051 firmware.
-                                            //We must access RF directly.
-                    // For RT2870 ATE mode, ATE_RF_IO_WRITE8(/READ8)_BY_REG_ID are redefined.
-#ifdef RALINK_ATE
-					if (ATE_ON(pAdapter))
-					{
-						ATE_RF_IO_READ8_BY_REG_ID(pAdapter, rfId, &regRF);
-					}
-					else
-#endif // RALINK_ATE //
-					// according to Andy, Gary, David require.
-					// the command rf shall read rf register directly for dubug.
-					// BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-					RT30xxReadRFRegister(pAdapter, rfId, &regRF);
-
-					sprintf(msg+strlen(msg), "R%02d[0x%02x]:%02X  ", rfId, rfId*2, regRF);
-				}
-				else
-				{//Invalid parametes, so default printk all RF
-					bIsPrintAllRF = TRUE;
-					goto next;
-				}
-			}
-			else
-			{ //Invalid parametes, so default printk all RF
-				bIsPrintAllRF = TRUE;
-				goto next;
-			}
-		}
-		else
-		{ //Write
-			if ((sscanf(this_char, "%d", &(rfId)) == 1) && (sscanf(value, "%lx", &(rfValue)) == 1))
-			{
-				if (rfId <= 31)
-				{
-					// In RT2860 ATE mode, we do not load 8051 firmware.
-					// We should access RF registers directly.
-                    // For RT2870 ATE mode, ATE_RF_IO_WRITE8/READ8_BY_REG_ID are redefined.
-#ifdef RALINK_ATE
-						if (ATE_ON(pAdapter))
-						{
-							ATE_RF_IO_READ8_BY_REG_ID(pAdapter, rfId, &regRF);
-							ATE_RF_IO_WRITE8_BY_REG_ID(pAdapter, (UCHAR)rfId,(UCHAR) rfValue);
-							//Read it back for showing
-							ATE_RF_IO_READ8_BY_REG_ID(pAdapter, rfId, &regRF);
-							sprintf(msg+strlen(msg), "R%02d[0x%02X]:%02X\n", rfId, rfId*2, regRF);
-						}
-						else
-#endif // RALINK_ATE //
-						{
-							// according to Andy, Gary, David require.
-							// the command RF shall read/write RF register directly for dubug.
-							//BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-					                //BBP_IO_WRITE8_BY_REG_ID(pAdapter, (UCHAR)bbpId,(UCHAR) bbpValue);
-							RT30xxReadRFRegister(pAdapter, rfId, &regRF);
-							RT30xxWriteRFRegister(pAdapter, (UCHAR)rfId,(UCHAR) rfValue);
-					                //Read it back for showing
-							//BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-							RT30xxReadRFRegister(pAdapter, rfId, &regRF);
-					                sprintf(msg+strlen(msg), "R%02d[0x%02X]:%02X\n", rfId, rfId*2, regRF);
-				                }
-				}
-				else
-				{//Invalid parametes, so default printk all RF
-					bIsPrintAllRF = TRUE;
-				}
-			}
-			else
-			{ //Invalid parametes, so default printk all RF
-				bIsPrintAllRF = TRUE;
-			}
-		}
-	}
-	else
-		bIsPrintAllRF = TRUE;
-next:
-	if (bIsPrintAllRF)
-	{
-		memset(msg, 0x00, 2048);
-		sprintf(msg, "\n");
-		for (rfId = 0; rfId <= 31; rfId++)
-		{
-			// In RT2860 ATE mode, we do not load 8051 firmware.
-            // We should access RF registers directly.
-            // For RT2870 ATE mode, ATE_RF_IO_WRITE8/READ8_BY_REG_ID are redefined.
-#ifdef RALINK_ATE
-				if (ATE_ON(pAdapter))
-				{
-					ATE_RF_IO_READ8_BY_REG_ID(pAdapter, rfId, &regRF);
-				}
-				else
-#endif // RALINK_ATE //
-
-			// according to Andy, Gary, David require.
-			// the command RF shall read/write RF register directly for dubug.
-			RT30xxReadRFRegister(pAdapter, rfId, &regRF);
-			sprintf(msg+strlen(msg), "%03d = %02X\n", rfId, regRF);
-		}
-		// Copy the information into the user buffer
-		DBGPRINT(RT_DEBUG_TRACE, ("strlen(msg)=%d\n", (UINT32)strlen(msg)));
-		wrq->u.data.length = strlen(msg);
-		if (copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("%s: copy_to_user() fail\n", __FUNCTION__));
-		}
-	}
-	else
-	{
-		if(strlen(msg) == 1)
-			sprintf(msg+strlen(msg), "===>Error command format!");
-
-		DBGPRINT(RT_DEBUG_TRACE, ("copy to user [msg=%s]\n", msg));
-		// Copy the information into the user buffer
-		DBGPRINT(RT_DEBUG_TRACE, ("strlen(msg) =%d\n", (UINT32)strlen(msg)));
-
-		// Copy the information into the user buffer
-		wrq->u.data.length = strlen(msg);
-		Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlRF\n\n"));
-}
-#endif // RT30xx //
-#endif // DBG //
-
-
-
-
-INT Set_TGnWifiTest_Proc(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          arg)
-{
-    if (simple_strtol(arg, 0, 10) == 0)
-        pAd->StaCfg.bTGnWifiTest = FALSE;
-    else
-        pAd->StaCfg.bTGnWifiTest = TRUE;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("IF Set_TGnWifiTest_Proc::(bTGnWifiTest=%d)\n", pAd->StaCfg.bTGnWifiTest));
-	return TRUE;
-}
-
-INT Set_LongRetryLimit_Proc(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	PUCHAR			arg)
-{
-	TX_RTY_CFG_STRUC	tx_rty_cfg;
-	UCHAR				LongRetryLimit = (UCHAR)simple_strtol(arg, 0, 10);
-
-	RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
-	tx_rty_cfg.field.LongRtyLimit = LongRetryLimit;
-	RTMP_IO_WRITE32(pAdapter, TX_RTY_CFG, tx_rty_cfg.word);
-	DBGPRINT(RT_DEBUG_TRACE, ("IF Set_LongRetryLimit_Proc::(tx_rty_cfg=0x%x)\n", tx_rty_cfg.word));
-	return TRUE;
-}
-
-INT Set_ShortRetryLimit_Proc(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	PUCHAR			arg)
-{
-	TX_RTY_CFG_STRUC	tx_rty_cfg;
-	UCHAR				ShortRetryLimit = (UCHAR)simple_strtol(arg, 0, 10);
-
-	RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
-	tx_rty_cfg.field.ShortRtyLimit = ShortRetryLimit;
-	RTMP_IO_WRITE32(pAdapter, TX_RTY_CFG, tx_rty_cfg.word);
-	DBGPRINT(RT_DEBUG_TRACE, ("IF Set_ShortRetryLimit_Proc::(tx_rty_cfg=0x%x)\n", tx_rty_cfg.word));
-	return TRUE;
-}
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-INT Set_Ieee80211dClientMode_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    if (simple_strtol(arg, 0, 10) == 0)
-        pAdapter->StaCfg.IEEE80211dClientMode = Rt802_11_D_None;
-    else if (simple_strtol(arg, 0, 10) == 1)
-        pAdapter->StaCfg.IEEE80211dClientMode = Rt802_11_D_Flexible;
-    else if (simple_strtol(arg, 0, 10) == 2)
-        pAdapter->StaCfg.IEEE80211dClientMode = Rt802_11_D_Strict;
-    else
-        return FALSE;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_Ieee802dMode_Proc::(IEEEE0211dMode=%d)\n", pAdapter->StaCfg.IEEE80211dClientMode));
-    return TRUE;
-}
-#endif // EXT_BUILD_CHANNEL_LIST //
-
-#ifdef CARRIER_DETECTION_SUPPORT
-INT Set_CarrierDetect_Proc(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          arg)
-{
-    if (simple_strtol(arg, 0, 10) == 0)
-        pAd->CommonCfg.CarrierDetect.Enable = FALSE;
-    else
-        pAd->CommonCfg.CarrierDetect.Enable = TRUE;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("IF Set_CarrierDetect_Proc::(CarrierDetect.Enable=%d)\n", pAd->CommonCfg.CarrierDetect.Enable));
-	return TRUE;
-}
-#endif // CARRIER_DETECTION_SUPPORT //
-
+#include "../rt2870/sta_ioctl.c"
diff --git a/drivers/staging/rt3070/wpa.h b/drivers/staging/rt3070/wpa.h
index 88c7c8bf3fc..94bb2327940 100644
--- a/drivers/staging/rt3070/wpa.h
+++ b/drivers/staging/rt3070/wpa.h
@@ -1,356 +1 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-
-	Module Name:
-	wpa.h
-
-	Abstract:
-
-	Revision History:
-	Who			When			What
-	--------	----------		----------------------------------------------
-	Name		Date			Modification logs
-*/
-
-#ifndef	__WPA_H__
-#define	__WPA_H__
-
-// EAPOL Key descripter frame format related length
-#define LEN_KEY_DESC_NONCE			32
-#define LEN_KEY_DESC_IV				16
-#define LEN_KEY_DESC_RSC			8
-#define LEN_KEY_DESC_ID				8
-#define LEN_KEY_DESC_REPLAY			8
-#define LEN_KEY_DESC_MIC			16
-
-// The length is the EAPoL-Key frame except key data field.
-// Please refer to 802.11i-2004 ,Figure 43u in p.78
-#define LEN_EAPOL_KEY_MSG			(sizeof(KEY_DESCRIPTER) - MAX_LEN_OF_RSNIE)
-
-// EAP Code Type.
-#define EAP_CODE_REQUEST	1
-#define EAP_CODE_RESPONSE	2
-#define EAP_CODE_SUCCESS    3
-#define EAP_CODE_FAILURE    4
-
-// EAPOL frame Protocol Version
-#define	EAPOL_VER					1
-#define	EAPOL_VER2					2
-
-// EAPOL-KEY Descriptor Type
-#define	WPA1_KEY_DESC				0xfe
-#define WPA2_KEY_DESC               0x02
-
-// Key Descriptor Version of Key Information
-#define	DESC_TYPE_TKIP				1
-#define	DESC_TYPE_AES				2
-#define DESC_TYPE_MESH				3
-
-#define LEN_MSG1_2WAY               0x7f
-#define MAX_LEN_OF_EAP_HS           256
-
-#define LEN_MASTER_KEY				32
-
-// EAPOL EK, MK
-#define LEN_EAP_EK					16
-#define LEN_EAP_MICK				16
-#define LEN_EAP_KEY					((LEN_EAP_EK)+(LEN_EAP_MICK))
-// TKIP key related
-#define LEN_PMKID					16
-#define LEN_TKIP_EK					16
-#define LEN_TKIP_RXMICK				8
-#define LEN_TKIP_TXMICK				8
-#define LEN_AES_EK					16
-#define LEN_AES_KEY					LEN_AES_EK
-#define LEN_TKIP_KEY				((LEN_TKIP_EK)+(LEN_TKIP_RXMICK)+(LEN_TKIP_TXMICK))
-#define TKIP_AP_TXMICK_OFFSET		((LEN_EAP_KEY)+(LEN_TKIP_EK))
-#define TKIP_AP_RXMICK_OFFSET		(TKIP_AP_TXMICK_OFFSET+LEN_TKIP_TXMICK)
-#define TKIP_GTK_LENGTH				((LEN_TKIP_EK)+(LEN_TKIP_RXMICK)+(LEN_TKIP_TXMICK))
-#define LEN_PTK						((LEN_EAP_KEY)+(LEN_TKIP_KEY))
-
-// RSN IE Length definition
-#define MAX_LEN_OF_RSNIE         	90
-#define MIN_LEN_OF_RSNIE         	8
-
-//EAP Packet Type
-#define	EAPPacket		0
-#define	EAPOLStart		1
-#define	EAPOLLogoff		2
-#define	EAPOLKey		3
-#define	EAPOLASFAlert	4
-#define	EAPTtypeMax		5
-
-#define	EAPOL_MSG_INVALID	0
-#define	EAPOL_PAIR_MSG_1	1
-#define	EAPOL_PAIR_MSG_2	2
-#define	EAPOL_PAIR_MSG_3	3
-#define	EAPOL_PAIR_MSG_4	4
-#define	EAPOL_GROUP_MSG_1	5
-#define	EAPOL_GROUP_MSG_2	6
-
-#define PAIRWISEKEY					1
-#define GROUPKEY					0
-
-// Retry timer counter initial value
-#define PEER_MSG1_RETRY_TIMER_CTR           0
-#define PEER_MSG3_RETRY_TIMER_CTR           10
-#define GROUP_MSG1_RETRY_TIMER_CTR          20
-
-
-#define EAPOL_START_DISABLE					0
-#define EAPOL_START_PSK						1
-#define EAPOL_START_1X						2
-
-#define MIX_CIPHER_WPA_TKIP_ON(x)       (((x) & 0x08) != 0)
-#define MIX_CIPHER_WPA_AES_ON(x)        (((x) & 0x04) != 0)
-#define MIX_CIPHER_WPA2_TKIP_ON(x)      (((x) & 0x02) != 0)
-#define MIX_CIPHER_WPA2_AES_ON(x)       (((x) & 0x01) != 0)
-
-#define ROUND_UP(__x, __y) \
-	(((ULONG)((__x)+((__y)-1))) & ((ULONG)~((__y)-1)))
-
-#define	ADD_ONE_To_64BIT_VAR(_V)		\
-{										\
-	UCHAR	cnt = LEN_KEY_DESC_REPLAY;	\
-	do									\
-	{									\
-		cnt--;							\
-		_V[cnt]++;						\
-		if (cnt == 0)					\
-			break;						\
-	}while (_V[cnt] == 0);				\
-}
-
-#define IS_WPA_CAPABILITY(a)       (((a) >= Ndis802_11AuthModeWPA) && ((a) <= Ndis802_11AuthModeWPA1PSKWPA2PSK))
-
-// EAPOL Key Information definition within Key descriptor format
-typedef	struct PACKED _KEY_INFO
-{
-#ifdef RT_BIG_ENDIAN
-	UCHAR	KeyAck:1;
-    UCHAR	Install:1;
-    UCHAR	KeyIndex:2;
-    UCHAR	KeyType:1;
-    UCHAR	KeyDescVer:3;
-    UCHAR	Rsvd:3;
-    UCHAR	EKD_DL:1;		// EKD for AP; DL for STA
-    UCHAR	Request:1;
-    UCHAR	Error:1;
-    UCHAR	Secure:1;
-    UCHAR	KeyMic:1;
-#else
-	UCHAR	KeyMic:1;
-	UCHAR	Secure:1;
-	UCHAR	Error:1;
-	UCHAR	Request:1;
-	UCHAR	EKD_DL:1;       // EKD for AP; DL for STA
-	UCHAR	Rsvd:3;
-	UCHAR	KeyDescVer:3;
-	UCHAR	KeyType:1;
-	UCHAR	KeyIndex:2;
-	UCHAR	Install:1;
-	UCHAR	KeyAck:1;
-#endif
-}	KEY_INFO, *PKEY_INFO;
-
-// EAPOL Key descriptor format
-typedef	struct PACKED _KEY_DESCRIPTER
-{
-	UCHAR		Type;
-	KEY_INFO	KeyInfo;
-	UCHAR		KeyLength[2];
-	UCHAR		ReplayCounter[LEN_KEY_DESC_REPLAY];
-	UCHAR		KeyNonce[LEN_KEY_DESC_NONCE];
-	UCHAR		KeyIv[LEN_KEY_DESC_IV];
-	UCHAR		KeyRsc[LEN_KEY_DESC_RSC];
-	UCHAR		KeyId[LEN_KEY_DESC_ID];
-	UCHAR		KeyMic[LEN_KEY_DESC_MIC];
-	UCHAR		KeyDataLen[2];
-	UCHAR		KeyData[MAX_LEN_OF_RSNIE];
-}	KEY_DESCRIPTER, *PKEY_DESCRIPTER;
-
-typedef	struct PACKED _EAPOL_PACKET
-{
-	UCHAR	 			ProVer;
-	UCHAR	 			ProType;
-	UCHAR	 			Body_Len[2];
-	KEY_DESCRIPTER		KeyDesc;
-}	EAPOL_PACKET, *PEAPOL_PACKET;
-
-//802.11i D10 page 83
-typedef struct PACKED _GTK_ENCAP
-{
-#ifndef RT_BIG_ENDIAN
-    UCHAR               Kid:2;
-    UCHAR               tx:1;
-    UCHAR               rsv:5;
-    UCHAR               rsv1;
-#else
-    UCHAR               rsv:5;
-    UCHAR               tx:1;
-    UCHAR               Kid:2;
-    UCHAR               rsv1;
-#endif
-    UCHAR               GTK[TKIP_GTK_LENGTH];
-}   GTK_ENCAP, *PGTK_ENCAP;
-
-typedef struct PACKED _KDE_ENCAP
-{
-    UCHAR               Type;
-    UCHAR               Len;
-    UCHAR               OUI[3];
-    UCHAR               DataType;
-    GTK_ENCAP      GTKEncap;
-}   KDE_ENCAP, *PKDE_ENCAP;
-
-// For WPA1
-typedef struct PACKED _RSNIE {
-    UCHAR   oui[4];
-    USHORT  version;
-    UCHAR   mcast[4];
-    USHORT  ucount;
-    struct PACKED {
-        UCHAR oui[4];
-    }ucast[1];
-} RSNIE, *PRSNIE;
-
-// For WPA2
-typedef struct PACKED _RSNIE2 {
-    USHORT  version;
-    UCHAR   mcast[4];
-    USHORT  ucount;
-    struct PACKED {
-        UCHAR oui[4];
-    }ucast[1];
-} RSNIE2, *PRSNIE2;
-
-// AKM Suite
-typedef struct PACKED _RSNIE_AUTH {
-    USHORT acount;
-    struct PACKED {
-        UCHAR oui[4];
-    }auth[1];
-} RSNIE_AUTH,*PRSNIE_AUTH;
-
-typedef	union PACKED _RSN_CAPABILITIES	{
-	struct	PACKED {
-#ifdef RT_BIG_ENDIAN
-        USHORT		Rsvd:10;
-        USHORT		GTKSA_R_Counter:2;
-        USHORT		PTKSA_R_Counter:2;
-        USHORT		No_Pairwise:1;
-		USHORT		PreAuth:1;
-#else
-        USHORT		PreAuth:1;
-		USHORT		No_Pairwise:1;
-		USHORT		PTKSA_R_Counter:2;
-		USHORT		GTKSA_R_Counter:2;
-		USHORT		Rsvd:10;
-#endif
-	}	field;
-	USHORT			word;
-}	RSN_CAPABILITIES, *PRSN_CAPABILITIES;
-
-typedef struct PACKED _EAP_HDR {
-    UCHAR   ProVer;
-    UCHAR   ProType;
-    UCHAR   Body_Len[2];
-    UCHAR   code;
-    UCHAR   identifier;
-    UCHAR   length[2]; // including code and identifier, followed by length-2 octets of data
-} EAP_HDR, *PEAP_HDR;
-
-// For supplicant state machine states. 802.11i Draft 4.1, p. 97
-// We simplified it
-typedef	enum	_WpaState
-{
-	SS_NOTUSE,				// 0
-	SS_START,				// 1
-	SS_WAIT_MSG_3,			// 2
-	SS_WAIT_GROUP,			// 3
-	SS_FINISH,  			// 4
-	SS_KEYUPDATE,			// 5
-}	WPA_STATE;
-
-//
-//	The definition of the cipher combination
-//
-// 	 bit3	bit2  bit1   bit0
-//	+------------+------------+
-// 	|	  WPA	 |	   WPA2   |
-//	+------+-----+------+-----+
-//	| TKIP | AES | TKIP | AES |
-//	|	0  |  1  |   1  |  0  | -> 0x06
-//	|	0  |  1  |   1  |  1  | -> 0x07
-//	|	1  |  0  |   0  |  1  | -> 0x09
-//	|	1  |  0  |   1  |  1  | -> 0x0B
-//	|	1  |  1  |   0  |  1  | -> 0x0D
-//	|	1  |  1  |   1  |  0  | -> 0x0E
-//	|	1  |  1  |   1  |  1  |	-> 0x0F
-//	+------+-----+------+-----+
-//
-typedef	enum	_WpaMixPairCipher
-{
-	MIX_CIPHER_NOTUSE 			= 0x00,
-	WPA_NONE_WPA2_TKIPAES		= 0x03,		// WPA2-TKIPAES
-	WPA_AES_WPA2_TKIP 			= 0x06,
-	WPA_AES_WPA2_TKIPAES		= 0x07,
-	WPA_TKIP_WPA2_AES			= 0x09,
-	WPA_TKIP_WPA2_TKIPAES		= 0x0B,
-	WPA_TKIPAES_WPA2_NONE		= 0x0C,		// WPA-TKIPAES
-	WPA_TKIPAES_WPA2_AES		= 0x0D,
-	WPA_TKIPAES_WPA2_TKIP		= 0x0E,
-	WPA_TKIPAES_WPA2_TKIPAES	= 0x0F,
-}	WPA_MIX_PAIR_CIPHER;
-
-typedef struct PACKED _RSN_IE_HEADER_STRUCT	{
-	UCHAR		Eid;
-	UCHAR		Length;
-	USHORT		Version;	// Little endian format
-}	RSN_IE_HEADER_STRUCT, *PRSN_IE_HEADER_STRUCT;
-
-// Cipher suite selector types
-typedef struct PACKED _CIPHER_SUITE_STRUCT	{
-	UCHAR		Oui[3];
-	UCHAR		Type;
-}	CIPHER_SUITE_STRUCT, *PCIPHER_SUITE_STRUCT;
-
-// Authentication and Key Management suite selector
-typedef struct PACKED _AKM_SUITE_STRUCT	{
-	UCHAR		Oui[3];
-	UCHAR		Type;
-}	AKM_SUITE_STRUCT, *PAKM_SUITE_STRUCT;
-
-// RSN capability
-typedef struct	PACKED _RSN_CAPABILITY	{
-	USHORT		Rsv:10;
-	USHORT		GTKSAReplayCnt:2;
-	USHORT		PTKSAReplayCnt:2;
-	USHORT		NoPairwise:1;
-	USHORT		PreAuth:1;
-}	RSN_CAPABILITY, *PRSN_CAPABILITY;
-
-#endif
+#include "../rt2870/wpa.h"
diff --git a/drivers/staging/rtl8187se/Kconfig b/drivers/staging/rtl8187se/Kconfig
index f636296b54b..236e4272544 100644
--- a/drivers/staging/rtl8187se/Kconfig
+++ b/drivers/staging/rtl8187se/Kconfig
@@ -1,6 +1,6 @@
 config RTL8187SE
 	tristate "RealTek RTL8187SE Wireless LAN NIC driver"
 	depends on PCI
-	depends on WIRELESS_EXT && COMPAT_NET_DEV_OPS
+	depends on WIRELESS_EXT
 	default N
 	---help---
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_module.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_module.c
index 0c9fef0b4e3..c2b61e648e4 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_module.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_module.c
@@ -114,7 +114,6 @@ struct net_device *alloc_ieee80211(int sizeof_priv)
 		goto failed;
 	}
 	ieee = netdev_priv(dev);
-	dev->hard_start_xmit = ieee80211_xmit;
 
 	ieee->dev = dev;
 
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
index 23519b37538..4d4ee563275 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
@@ -1680,7 +1680,7 @@ inline void update_network(struct ieee80211_network *dst,
 	if(src->wmm_param[0].ac_aci_acm_aifsn|| \
 	   src->wmm_param[1].ac_aci_acm_aifsn|| \
 	   src->wmm_param[2].ac_aci_acm_aifsn|| \
-	   src->wmm_param[1].ac_aci_acm_aifsn) {
+	   src->wmm_param[3].ac_aci_acm_aifsn) {
 	  memcpy(dst->wmm_param, src->wmm_param, WME_AC_PRAM_LEN);
 	}
 	dst->QoS_Enable = src->QoS_Enable;
diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c
index e10413cee0d..7e2fecae813 100644
--- a/drivers/staging/rtl8187se/r8180_core.c
+++ b/drivers/staging/rtl8187se/r8180_core.c
@@ -198,7 +198,8 @@ static void __devexit rtl8180_pci_remove(struct pci_dev *pdev);
 static void rtl8180_shutdown (struct pci_dev *pdev)
 {
 	struct net_device *dev = pci_get_drvdata(pdev);
-	dev->stop(dev);
+	if (dev->netdev_ops->ndo_stop)
+		dev->netdev_ops->ndo_stop(dev);
 	pci_disable_device(pdev);
 }
 
@@ -4551,8 +4552,6 @@ short rtl8180_init(struct net_device *dev)
 		//DMESG("Reported EEPROM chip is a 93c46 (1Kbit)");
 	}
 
-	dev->get_stats = rtl8180_stats;
-
 	dev->dev_addr[0]=eprom_read(dev,MAC_ADR) & 0xff;
 	dev->dev_addr[1]=(eprom_read(dev,MAC_ADR) & 0xff00)>>8;
 	dev->dev_addr[2]=eprom_read(dev,MAC_ADR+1) & 0xff;
@@ -5832,6 +5831,18 @@ int rtl8180_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
      -----------------------------PCI STUFF---------------------------
 *****************************************************************************/
 
+static const struct net_device_ops rtl8180_netdev_ops = {
+	.ndo_open		= rtl8180_open,
+	.ndo_stop		= rtl8180_close,
+	.ndo_get_stats		= rtl8180_stats,
+	.ndo_tx_timeout		= rtl8180_restart,
+	.ndo_do_ioctl		= rtl8180_ioctl,
+	.ndo_set_multicast_list	= r8180_set_multicast,
+	.ndo_set_mac_address	= r8180_set_mac_adr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_start_xmit		= ieee80211_xmit,
+};
 
 static int __devinit rtl8180_pci_probe(struct pci_dev *pdev,
 				       const struct pci_device_id *id)
@@ -5936,14 +5947,8 @@ static int __devinit rtl8180_pci_probe(struct pci_dev *pdev,
 	dev->irq = pdev->irq;
 	priv->irq = 0;
 
-	dev->open = rtl8180_open;
-	dev->stop = rtl8180_close;
-	//dev->hard_start_xmit = ieee80211_xmit;
-	dev->tx_timeout = rtl8180_restart;
+	dev->netdev_ops = &rtl8180_netdev_ops;
 	dev->wireless_handlers = &r8180_wx_handlers_def;
-	dev->do_ioctl = rtl8180_ioctl;
-	dev->set_multicast_list = r8180_set_multicast;
-	dev->set_mac_address = r8180_set_mac_adr;
 
 #if WIRELESS_EXT >= 12
 #if WIRELESS_EXT < 17
diff --git a/drivers/staging/rtl8187se/r8180_dm.c b/drivers/staging/rtl8187se/r8180_dm.c
index 93b5a7bb255..e772f0f6b67 100644
--- a/drivers/staging/rtl8187se/r8180_dm.c
+++ b/drivers/staging/rtl8187se/r8180_dm.c
@@ -132,7 +132,7 @@ void rtl8180_tx_pw_wq (struct work_struct *work)
 //      struct r8180_priv *priv = container_of(work, struct r8180_priv, watch_dog_wq);
 //      struct ieee80211_device * ieee = (struct ieee80211_device*)
 //                                             container_of(work, struct ieee80211_device, watch_dog_wq);
-        struct delayed_work *dwork = container_of(work,struct delayed_work,work);
+	struct delayed_work *dwork = to_delayed_work(work);
         struct ieee80211_device *ieee = container_of(dwork,struct ieee80211_device,tx_pw_wq);
         struct net_device *dev = ieee->dev;
 #else
@@ -314,7 +314,7 @@ void rtl8180_hw_dig_wq (struct work_struct *work)
 //      struct r8180_priv *priv = container_of(work, struct r8180_priv, watch_dog_wq);
 //      struct ieee80211_device * ieee = (struct ieee80211_device*)
 //                                             container_of(work, struct ieee80211_device, watch_dog_wq);
-        struct delayed_work *dwork = container_of(work,struct delayed_work,work);
+	struct delayed_work *dwork = to_delayed_work(work);
         struct ieee80211_device *ieee = container_of(dwork,struct ieee80211_device,hw_dig_wq);
         struct net_device *dev = ieee->dev;
 #else
@@ -1250,7 +1250,7 @@ SetInitialGain:
 #if LINUX_VERSION_CODE >=KERNEL_VERSION(2,6,20)
 void rtl8180_rate_adapter(struct work_struct * work)
 {
-	struct delayed_work *dwork = container_of(work,struct delayed_work,work);
+	struct delayed_work *dwork = to_delayed_work(work);
         struct ieee80211_device *ieee = container_of(dwork,struct ieee80211_device,rate_adapter_wq);
         struct net_device *dev = ieee->dev;
 #else
diff --git a/drivers/staging/rtl8187se/r8180_pm.c b/drivers/staging/rtl8187se/r8180_pm.c
index 3851b936835..2b3d642db77 100644
--- a/drivers/staging/rtl8187se/r8180_pm.c
+++ b/drivers/staging/rtl8187se/r8180_pm.c
@@ -30,7 +30,8 @@ int rtl8180_suspend (struct pci_dev *pdev, pm_message_t state)
 	if (!netif_running(dev))
 		goto out_pci_suspend;
 
-	dev->stop(dev);
+	if (dev->netdev_ops->ndo_stop)
+		dev->netdev_ops->ndo_stop(dev);
 
 	netif_device_detach(dev);
 
@@ -71,7 +72,8 @@ int rtl8180_resume (struct pci_dev *pdev)
 	if(!netif_running(dev))
 		goto out;
 
-	dev->open(dev);
+	if (dev->netdev_ops->ndo_open)
+		dev->netdev_ops->ndo_open(dev);
 	netif_device_attach(dev);
 out:
 	return 0;
diff --git a/drivers/staging/rtl8192su/Kconfig b/drivers/staging/rtl8192su/Kconfig
new file mode 100644
index 00000000000..4b5552c5926
--- /dev/null
+++ b/drivers/staging/rtl8192su/Kconfig
@@ -0,0 +1,6 @@
+config RTL8192SU
+	tristate "RealTek RTL8192SU Wireless LAN NIC driver"
+	depends on PCI
+	depends on WIRELESS_EXT && COMPAT_NET_DEV_OPS
+	default N
+	---help---
diff --git a/drivers/staging/rtl8192su/Makefile b/drivers/staging/rtl8192su/Makefile
new file mode 100644
index 00000000000..f010ab502a9
--- /dev/null
+++ b/drivers/staging/rtl8192su/Makefile
@@ -0,0 +1,66 @@
+NIC_SELECT = RTL8192SU
+
+EXTRA_CFLAGS += -std=gnu89
+EXTRA_CFLAGS += -O2
+EXTRA_CFLAGS += -mhard-float -DCONFIG_FORCE_HARD_FLOAT=y
+
+EXTRA_CFLAGS += -DJACKSON_NEW_RX
+EXTRA_CFLAGS += -DTHOMAS_BEACON -DTHOMAS_TURBO
+#EXTRA_CFLAGS += -DUSE_ONE_PIPE
+EXTRA_CFLAGS += -DENABLE_DOT11D
+
+EXTRA_CFLAGS += -DRTL8192SU
+EXTRA_CFLAGS += -DRTL8190_Download_Firmware_From_Header=1
+EXTRA_CFLAGS += -DRTL8192S_PREPARE_FOR_NORMAL_RELEASE
+EXTRA_CFLAGS += -DRTL8192SU_DISABLE_IQK=1
+
+#EXTRA_CFLAGS += -DEEPROM_OLD_FORMAT_SUPPORT
+
+#EXTRA_CFLAGS += -DUSB_RX_AGGREGATION_SUPPORT=0
+#EXTRA_CFLAGS += -DUSB_TX_DRIVER_AGGREGATION_ENABLE=0
+#EXTRA_CFLAGS += -DRTL8192SU_DISABLE_CCK_RATE=0
+EXTRA_CFLAGS += -DRTL8192S_DISABLE_FW_DM=0
+EXTRA_CFLAGS += -DDISABLE_BB_RF=0
+EXTRA_CFLAGS += -DRTL8192SU_USE_PARAM_TXPWR=0
+EXTRA_CFLAGS += -DRTL8192SU_FPGA_UNSPECIFIED_NETWORK=0
+#EXTRA_CFLAGS += -DRTL8192SU_FPGA_2MAC_VERIFICATION #=0
+EXTRA_CFLAGS += -DRTL8192SU_ASIC_VERIFICATION
+EXTRA_CFLAGS += -DRTL8192SU_USB_PHY_TEST=0
+
+#EXTRA_CFLAGS += -DMUTIPLE_BULK_OUT
+EXTRA_CFLAGS += -DCONFIG_RTL8192_PM
+
+r8192s_usb-objs :=		\
+	r8180_93cx6.o		\
+	r8192U_wx.o		\
+	r8192S_phy.o		\
+	r8192S_rtl6052.o	\
+	r8192S_rtl8225.o	\
+	r819xU_cmdpkt.o		\
+	r8192U_dm.o		\
+	r8192SU_HWImg.o		\
+	r8192S_firmware.o	\
+	r8192S_Efuse.o		\
+	r8192U_core.o		\
+	r8192U_pm.o
+
+ieee80211-rsl-objs :=			\
+	ieee80211/ieee80211_rx.o	\
+	ieee80211/ieee80211_softmac.o	\
+	ieee80211/ieee80211_tx.o	\
+	ieee80211/ieee80211_wx.o	\
+	ieee80211/ieee80211_module.o	\
+	ieee80211/ieee80211_softmac_wx.o\
+	ieee80211/rtl819x_HTProc.o	\
+	ieee80211/rtl819x_TSProc.o	\
+	ieee80211/rtl819x_BAProc.o	\
+	ieee80211/dot11d.o
+
+obj-$(CONFIG_RTL8192SU) += r8192s_usb.o
+obj-$(CONFIG_RTL8192SU) += ieee80211-rsl.o
+obj-$(CONFIG_RTL8192SU) += ieee80211/ieee80211_crypt.o
+obj-$(CONFIG_RTL8192SU) += ieee80211/ieee80211_crypt_tkip.o
+obj-$(CONFIG_RTL8192SU) += ieee80211/ieee80211_crypt_ccmp.o
+obj-$(CONFIG_RTL8192SU) += ieee80211/ieee80211_crypt_wep.o
+
+
diff --git a/drivers/staging/rtl8192su/authors b/drivers/staging/rtl8192su/authors
new file mode 100644
index 00000000000..b08bbae39e7
--- /dev/null
+++ b/drivers/staging/rtl8192su/authors
@@ -0,0 +1 @@
+Andrea Merello <andreamrl@tiscali.it>
diff --git a/drivers/staging/rtl8192su/dot11d.h b/drivers/staging/rtl8192su/dot11d.h
new file mode 100644
index 00000000000..15b7a4ba37b
--- /dev/null
+++ b/drivers/staging/rtl8192su/dot11d.h
@@ -0,0 +1,102 @@
+#ifndef __INC_DOT11D_H
+#define __INC_DOT11D_H
+
+#ifdef ENABLE_DOT11D
+#include "ieee80211.h"
+
+//#define ENABLE_DOT11D
+
+//#define DOT11D_MAX_CHNL_NUM 83
+
+typedef struct _CHNL_TXPOWER_TRIPLE {
+	u8 FirstChnl;
+	u8  NumChnls;
+	u8  MaxTxPowerInDbm;
+}CHNL_TXPOWER_TRIPLE, *PCHNL_TXPOWER_TRIPLE;
+
+typedef enum _DOT11D_STATE {
+	DOT11D_STATE_NONE = 0,
+	DOT11D_STATE_LEARNED,
+	DOT11D_STATE_DONE,
+}DOT11D_STATE;
+
+typedef struct _RT_DOT11D_INFO {
+	//DECLARE_RT_OBJECT(RT_DOT11D_INFO);
+
+	bool bEnabled; // dot11MultiDomainCapabilityEnabled
+
+	u16 CountryIeLen; // > 0 if CountryIeBuf[] contains valid country information element.
+	u8  CountryIeBuf[MAX_IE_LEN];
+	u8  CountryIeSrcAddr[6]; // Source AP of the country IE.
+	u8  CountryIeWatchdog;
+
+	u8  channel_map[MAX_CHANNEL_NUMBER+1];  //!!!Value 0: Invalid, 1: Valid (active scan), 2: Valid (passive scan)
+	//u8  ChnlListLen; // #Bytes valid in ChnlList[].
+	//u8  ChnlList[DOT11D_MAX_CHNL_NUM];
+	u8  MaxTxPwrDbmList[MAX_CHANNEL_NUMBER+1];
+
+	DOT11D_STATE State;
+}RT_DOT11D_INFO, *PRT_DOT11D_INFO;
+#define eqMacAddr(a,b)		( ((a)[0]==(b)[0] && (a)[1]==(b)[1] && (a)[2]==(b)[2] && (a)[3]==(b)[3] && (a)[4]==(b)[4] && (a)[5]==(b)[5]) ? 1:0 )
+#define cpMacAddr(des,src)	      ((des)[0]=(src)[0],(des)[1]=(src)[1],(des)[2]=(src)[2],(des)[3]=(src)[3],(des)[4]=(src)[4],(des)[5]=(src)[5])
+#define GET_DOT11D_INFO(__pIeeeDev) ((PRT_DOT11D_INFO)((__pIeeeDev)->pDot11dInfo))
+
+#define IS_DOT11D_ENABLE(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->bEnabled
+#define IS_COUNTRY_IE_VALID(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen > 0)
+
+#define IS_EQUAL_CIE_SRC(__pIeeeDev, __pTa) eqMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa)
+#define UPDATE_CIE_SRC(__pIeeeDev, __pTa) cpMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa)
+
+#define IS_COUNTRY_IE_CHANGED(__pIeeeDev, __Ie) \
+	(((__Ie).Length == 0 || (__Ie).Length != GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen) ? \
+	FALSE : \
+	(!memcmp(GET_DOT11D_INFO(__pIeeeDev)->CountryIeBuf, (__Ie).Octet, (__Ie).Length)))
+
+#define CIE_WATCHDOG_TH 1
+#define GET_CIE_WATCHDOG(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->CountryIeWatchdog
+#define RESET_CIE_WATCHDOG(__pIeeeDev) GET_CIE_WATCHDOG(__pIeeeDev) = 0
+#define UPDATE_CIE_WATCHDOG(__pIeeeDev) ++GET_CIE_WATCHDOG(__pIeeeDev)
+
+#define IS_DOT11D_STATE_DONE(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->State == DOT11D_STATE_DONE)
+
+
+void
+Dot11d_Init(
+	struct ieee80211_device *dev
+	);
+
+void
+Dot11d_Reset(
+	struct ieee80211_device *dev
+	);
+
+void
+Dot11d_UpdateCountryIe(
+	struct ieee80211_device *dev,
+	u8 *		pTaddr,
+	u16	CoutryIeLen,
+	u8 * pCoutryIe
+	);
+
+u8
+DOT11D_GetMaxTxPwrInDbm(
+	struct ieee80211_device *dev,
+	u8 Channel
+	);
+
+void
+DOT11D_ScanComplete(
+	struct ieee80211_device * dev
+	);
+
+int IsLegalChannel(
+	struct ieee80211_device * dev,
+	u8 channel
+);
+
+int ToLegalChannel(
+	struct ieee80211_device * dev,
+	u8 channel
+);
+#endif //ENABLE_DOT11D
+#endif // #ifndef __INC_DOT11D_H
diff --git a/drivers/staging/rtl8192su/ieee80211.h b/drivers/staging/rtl8192su/ieee80211.h
new file mode 100644
index 00000000000..0edb09a536f
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211.h
@@ -0,0 +1,2901 @@
+/*
+ * Merged with mainline ieee80211.h in Aug 2004.  Original ieee802_11
+ * remains copyright by the original authors
+ *
+ * Portions of the merged code are based on Host AP (software wireless
+ * LAN access point) driver for Intersil Prism2/2.5/3.
+ *
+ * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+ * <jkmaline@cc.hut.fi>
+ * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+ *
+ * Adaption to a generic IEEE 802.11 stack by James Ketrenos
+ * <jketreno@linux.intel.com>
+ * Copyright (c) 2004, Intel Corporation
+ *
+ * Modified for Realtek's wi-fi cards by Andrea Merello
+ * <andreamrl@tiscali.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation. See README and COPYING for
+ * more details.
+ */
+#ifndef IEEE80211_H
+#define IEEE80211_H
+#include <linux/if_ether.h> /* ETH_ALEN */
+#include <linux/kernel.h>   /* ARRAY_SIZE */
+#include <linux/version.h>
+#include <linux/module.h>
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+#include <linux/jiffies.h>
+#else
+#include <linux/jffs.h>
+#include <linux/tqueue.h>
+#endif
+#include <linux/timer.h>
+#include <linux/sched.h>
+
+#include <linux/delay.h>
+#include <linux/wireless.h>
+
+#include "ieee80211/rtl819x_HT.h"
+#include "ieee80211/rtl819x_BA.h"
+#include "ieee80211/rtl819x_TS.h"
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20))
+#ifndef bool
+typedef enum{false = 0, true} bool;
+#endif
+#endif
+
+#ifndef IW_MODE_MONITOR
+#define IW_MODE_MONITOR 6
+#endif
+
+#ifndef IWEVCUSTOM
+#define IWEVCUSTOM 0x8c02
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
+#ifndef __bitwise
+#define __bitwise __attribute__((bitwise))
+#endif
+typedef __u16  __le16;
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,27))
+struct iw_spy_data{
+	/* --- Standard spy support --- */
+	int 			spy_number;
+	u_char 			spy_address[IW_MAX_SPY][ETH_ALEN];
+	struct iw_quality	spy_stat[IW_MAX_SPY];
+	/* --- Enhanced spy support (event) */
+	struct iw_quality	spy_thr_low; /* Low threshold */
+	struct iw_quality	spy_thr_high; /* High threshold */
+	u_char			spy_thr_under[IW_MAX_SPY];
+};
+#endif
+#endif
+
+#ifndef container_of
+/**
+ * container_of - cast a member of a structure out to the containing structure
+ *
+ * @ptr:        the pointer to the member.
+ * @type:       the type of the container struct this is embedded in.
+ * @member:     the name of the member within the struct.
+ *
+ */
+#define container_of(ptr, type, member) ({                      \
+        const typeof( ((type *)0)->member ) *__mptr = (ptr);    \
+        (type *)( (char *)__mptr - offsetof(type,member) );})
+#endif
+
+#define KEY_TYPE_NA		0x0
+#define KEY_TYPE_WEP40 		0x1
+#define KEY_TYPE_TKIP		0x2
+#define KEY_TYPE_CCMP		0x4
+#define KEY_TYPE_WEP104		0x5
+
+/* added for rtl819x tx procedure */
+#define MAX_QUEUE_SIZE		0x10
+
+//
+// 8190 queue mapping
+//
+#define BK_QUEUE                               0
+#define BE_QUEUE                               1
+#define VI_QUEUE                               2
+#define VO_QUEUE                               3
+#define HCCA_QUEUE                             4
+#define TXCMD_QUEUE                            5
+#define MGNT_QUEUE                             6
+#define HIGH_QUEUE                             7
+#define BEACON_QUEUE                           8
+
+#define LOW_QUEUE                              BE_QUEUE
+#define NORMAL_QUEUE                           MGNT_QUEUE
+
+//added by amy for ps
+#define SWRF_TIMEOUT				50
+
+//added by amy for LEAP related
+#define IE_CISCO_FLAG_POSITION		0x08	// Flag byte: byte 8, numbered from 0.
+#define SUPPORT_CKIP_MIC			0x08	// bit3
+#define SUPPORT_CKIP_PK			0x10	// bit4
+//added by amy for ps
+// RF Off Level for IPS or HW/SW radio off
+#define	RT_RF_OFF_LEVL_ASPM			BIT0	// PCI ASPM
+#define	RT_RF_OFF_LEVL_CLK_REQ		BIT1	// PCI clock request
+#define	RT_RF_OFF_LEVL_PCI_D3			BIT2	// PCI D3 mode
+#define	RT_RF_OFF_LEVL_HALT_NIC		BIT3	// NIC halt, re-initialize hw parameters
+#define	RT_RF_OFF_LEVL_FREE_FW		BIT4	// FW free, re-download the FW
+#define	RT_RF_OFF_LEVL_FW_32K		BIT5	// FW in 32k
+#define	RT_RF_PS_LEVEL_ALWAYS_ASPM	BIT6	// Always enable ASPM and Clock Req in initialization.
+#define	RT_RF_LPS_DISALBE_2R			BIT30	// When LPS is on, disable 2R if no packet is received or transmittd.
+#define	RT_RF_LPS_LEVEL_ASPM			BIT31	// LPS with ASPM
+#define	RT_IN_PS_LEVEL(pPSC, _PS_FLAG)	((pPSC->CurPsLevel & _PS_FLAG) ? true : false)
+#define	RT_CLEAR_PS_LEVEL(pPSC, _PS_FLAG)	(pPSC->CurPsLevel &= (~(_PS_FLAG)))
+#define	RT_SET_PS_LEVEL(pPSC, _PS_FLAG)	(pPSC->CurPsLevel->CurPsLevel |= _PS_FLAG)
+/* defined for skb cb field */
+/* At most 28 byte */
+typedef struct cb_desc {
+        /* Tx Desc Related flags (8-9) */
+	u8 bLastIniPkt:1;
+	u8 bCmdOrInit:1;
+        u8 bFirstSeg:1;
+        u8 bLastSeg:1;
+        u8 bEncrypt:1;
+        u8 bTxDisableRateFallBack:1;
+        u8 bTxUseDriverAssingedRate:1;
+        u8 bHwSec:1; //indicate whether use Hw security. WB
+
+        u8 reserved1;
+
+        /* Tx Firmware Relaged flags (10-11)*/
+        u8 bCTSEnable:1;
+        u8 bRTSEnable:1;
+        u8 bUseShortGI:1;
+        u8 bUseShortPreamble:1;
+        u8 bTxEnableFwCalcDur:1;
+        u8 bAMPDUEnable:1;
+        u8 bRTSSTBC:1;
+        u8 RTSSC:1;
+
+        u8 bRTSBW:1;
+        u8 bPacketBW:1;
+	u8 bRTSUseShortPreamble:1;
+	u8 bRTSUseShortGI:1;
+	u8 bMulticast:1;
+	u8 bBroadcast:1;
+        //u8 reserved2:2;
+        u8 drv_agg_enable:1;
+        u8 reserved2:1;
+
+        /* Tx Desc related element(12-19) */
+        u8 rata_index;
+        u8 queue_index;
+        //u8 reserved3;
+        //u8 reserved4;
+        u16 txbuf_size;
+        //u8 reserved5;
+	u8 RATRIndex;
+        u8 reserved6;
+        u8 reserved7;
+        u8 reserved8;
+
+        /* Tx firmware related element(20-27) */
+        u8 data_rate;
+        u8 rts_rate;
+        u8 ampdu_factor;
+        u8 ampdu_density;
+        //u8 reserved9;
+        //u8 reserved10;
+        //u8 reserved11;
+        u8 DrvAggrNum;
+	u16 pkt_size;
+        u8 reserved12;
+}cb_desc, *pcb_desc;
+
+/*--------------------------Define -------------------------------------------*/
+#define MGN_1M                  0x02
+#define MGN_2M                  0x04
+#define MGN_5_5M                0x0b
+#define MGN_11M                 0x16
+
+#define MGN_6M                  0x0c
+#define MGN_9M                  0x12
+#define MGN_12M                 0x18
+#define MGN_18M                 0x24
+#define MGN_24M                 0x30
+#define MGN_36M                 0x48
+#define MGN_48M                 0x60
+#define MGN_54M                 0x6c
+
+#define MGN_MCS0                0x80
+#define MGN_MCS1                0x81
+#define MGN_MCS2                0x82
+#define MGN_MCS3                0x83
+#define MGN_MCS4                0x84
+#define MGN_MCS5                0x85
+#define MGN_MCS6                0x86
+#define MGN_MCS7                0x87
+#define MGN_MCS8                0x88
+#define MGN_MCS9                0x89
+#define MGN_MCS10               0x8a
+#define MGN_MCS11               0x8b
+#define MGN_MCS12               0x8c
+#define MGN_MCS13               0x8d
+#define MGN_MCS14               0x8e
+#define MGN_MCS15               0x8f
+#define	MGN_MCS0_SG			0x90
+#define	MGN_MCS1_SG			0x91
+#define	MGN_MCS2_SG			0x92
+#define	MGN_MCS3_SG			0x93
+#define	MGN_MCS4_SG			0x94
+#define	MGN_MCS5_SG			0x95
+#define	MGN_MCS6_SG			0x96
+#define	MGN_MCS7_SG			0x97
+#define	MGN_MCS8_SG			0x98
+#define	MGN_MCS9_SG			0x99
+#define	MGN_MCS10_SG		0x9a
+#define	MGN_MCS11_SG		0x9b
+#define	MGN_MCS12_SG		0x9c
+#define	MGN_MCS13_SG		0x9d
+#define	MGN_MCS14_SG		0x9e
+#define	MGN_MCS15_SG		0x9f
+
+
+//----------------------------------------------------------------------------
+//		802.11 Management frame Reason Code field
+//----------------------------------------------------------------------------
+enum	_ReasonCode{
+	unspec_reason	= 0x1,
+	auth_not_valid	= 0x2,
+	deauth_lv_ss	= 0x3,
+	inactivity		= 0x4,
+	ap_overload 	= 0x5,
+	class2_err		= 0x6,
+	class3_err		= 0x7,
+	disas_lv_ss 	= 0x8,
+	asoc_not_auth	= 0x9,
+
+	//----MIC_CHECK
+	mic_failure 	= 0xe,
+	//----END MIC_CHECK
+
+	// Reason code defined in 802.11i D10.0 p.28.
+	invalid_IE		= 0x0d,
+	four_way_tmout	= 0x0f,
+	two_way_tmout	= 0x10,
+	IE_dismatch 	= 0x11,
+	invalid_Gcipher = 0x12,
+	invalid_Pcipher = 0x13,
+	invalid_AKMP	= 0x14,
+	unsup_RSNIEver = 0x15,
+	invalid_RSNIE	= 0x16,
+	auth_802_1x_fail= 0x17,
+	ciper_reject		= 0x18,
+
+	// Reason code defined in 7.3.1.7, 802.1e D13.0, p.42. Added by Annie, 2005-11-15.
+	QoS_unspec		= 0x20, // 32
+	QAP_bandwidth	= 0x21, // 33
+	poor_condition	= 0x22, // 34
+	no_facility 	= 0x23, // 35
+							// Where is 36???
+	req_declined	= 0x25, // 37
+	invalid_param	= 0x26, // 38
+	req_not_honored= 0x27,	// 39
+	TS_not_created	= 0x2F, // 47
+	DL_not_allowed	= 0x30, // 48
+	dest_not_exist	= 0x31, // 49
+	dest_not_QSTA	= 0x32, // 50
+};
+
+
+
+#define aSifsTime	 (((priv->ieee80211->current_network.mode == IEEE_A)||(priv->ieee80211->current_network.mode == IEEE_N_24G)||(priv->ieee80211->current_network.mode == IEEE_N_5G))? 16 : 10)
+
+#define MGMT_QUEUE_NUM 5
+
+#define IEEE_CMD_SET_WPA_PARAM			1
+#define	IEEE_CMD_SET_WPA_IE			2
+#define IEEE_CMD_SET_ENCRYPTION			3
+#define IEEE_CMD_MLME				4
+
+#define IEEE_PARAM_WPA_ENABLED			1
+#define IEEE_PARAM_TKIP_COUNTERMEASURES		2
+#define IEEE_PARAM_DROP_UNENCRYPTED		3
+#define IEEE_PARAM_PRIVACY_INVOKED		4
+#define IEEE_PARAM_AUTH_ALGS			5
+#define IEEE_PARAM_IEEE_802_1X			6
+//It should consistent with the driver_XXX.c
+//   David, 2006.9.26
+#define IEEE_PARAM_WPAX_SELECT			7
+//Added for notify the encryption type selection
+//   David, 2006.9.26
+#define IEEE_PROTO_WPA				1
+#define IEEE_PROTO_RSN				2
+//Added for notify the encryption type selection
+//   David, 2006.9.26
+#define IEEE_WPAX_USEGROUP			0
+#define IEEE_WPAX_WEP40				1
+#define IEEE_WPAX_TKIP				2
+#define IEEE_WPAX_WRAP   			3
+#define IEEE_WPAX_CCMP				4
+#define IEEE_WPAX_WEP104			5
+
+#define IEEE_KEY_MGMT_IEEE8021X			1
+#define IEEE_KEY_MGMT_PSK			2
+
+#define IEEE_MLME_STA_DEAUTH			1
+#define IEEE_MLME_STA_DISASSOC			2
+
+
+#define IEEE_CRYPT_ERR_UNKNOWN_ALG		2
+#define IEEE_CRYPT_ERR_UNKNOWN_ADDR		3
+#define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED	4
+#define IEEE_CRYPT_ERR_KEY_SET_FAILED		5
+#define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED	6
+#define IEEE_CRYPT_ERR_CARD_CONF_FAILED		7
+
+
+#define	IEEE_CRYPT_ALG_NAME_LEN			16
+
+#define MAX_IE_LEN  0xff
+
+// added for kernel conflict
+#define ieee80211_crypt_deinit_entries 	ieee80211_crypt_deinit_entries_rsl
+#define ieee80211_crypt_deinit_handler 	ieee80211_crypt_deinit_handler_rsl
+#define ieee80211_crypt_delayed_deinit 	ieee80211_crypt_delayed_deinit_rsl
+#define ieee80211_register_crypto_ops  	ieee80211_register_crypto_ops_rsl
+#define ieee80211_unregister_crypto_ops ieee80211_unregister_crypto_ops_rsl
+#define ieee80211_get_crypto_ops 	ieee80211_get_crypto_ops_rsl
+
+#define ieee80211_ccmp_null		ieee80211_ccmp_null_rsl
+
+#define ieee80211_tkip_null		ieee80211_tkip_null_rsl
+
+#define ieee80211_wep_null		ieee80211_wep_null_rsl
+
+#define free_ieee80211          	free_ieee80211_rsl
+#define alloc_ieee80211        		alloc_ieee80211_rsl
+
+#define ieee80211_rx 			ieee80211_rx_rsl
+#define ieee80211_rx_mgt		ieee80211_rx_mgt_rsl
+
+#define ieee80211_get_beacon		ieee80211_get_beacon_rsl
+#define ieee80211_wake_queue		ieee80211_wake_queue_rsl
+#define ieee80211_stop_queue		ieee80211_stop_queue_rsl
+#define ieee80211_reset_queue		ieee80211_reset_queue_rsl
+#define ieee80211_softmac_stop_protocol	ieee80211_softmac_stop_protocol_rsl
+#define ieee80211_softmac_start_protocol ieee80211_softmac_start_protocol_rsl
+#define ieee80211_is_shortslot		ieee80211_is_shortslot_rsl
+#define ieee80211_is_54g		ieee80211_is_54g_rsl
+#define ieee80211_wpa_supplicant_ioctl	ieee80211_wpa_supplicant_ioctl_rsl
+#define ieee80211_ps_tx_ack		ieee80211_ps_tx_ack_rsl
+#define ieee80211_softmac_xmit		ieee80211_softmac_xmit_rsl
+#define ieee80211_stop_send_beacons	ieee80211_stop_send_beacons_rsl
+#define notify_wx_assoc_event		notify_wx_assoc_event_rsl
+#define SendDisassociation		SendDisassociation_rsl
+#define ieee80211_disassociate		ieee80211_disassociate_rsl
+#define ieee80211_start_send_beacons	ieee80211_start_send_beacons_rsl
+#define ieee80211_stop_scan		ieee80211_stop_scan_rsl
+#define ieee80211_send_probe_requests	ieee80211_send_probe_requests_rsl
+#define ieee80211_softmac_scan_syncro	ieee80211_softmac_scan_syncro_rsl
+#define ieee80211_start_scan_syncro	ieee80211_start_scan_syncro_rsl
+
+#define ieee80211_wx_get_essid		ieee80211_wx_get_essid_rsl
+#define ieee80211_wx_set_essid		ieee80211_wx_set_essid_rsl
+#define ieee80211_wx_set_rate		ieee80211_wx_set_rate_rsl
+#define ieee80211_wx_get_rate		ieee80211_wx_get_rate_rsl
+#define ieee80211_wx_set_wap		ieee80211_wx_set_wap_rsl
+#define ieee80211_wx_get_wap		ieee80211_wx_get_wap_rsl
+#define ieee80211_wx_set_mode		ieee80211_wx_set_mode_rsl
+#define ieee80211_wx_get_mode		ieee80211_wx_get_mode_rsl
+#define ieee80211_wx_set_scan		ieee80211_wx_set_scan_rsl
+#define ieee80211_wx_get_freq		ieee80211_wx_get_freq_rsl
+#define ieee80211_wx_set_freq		ieee80211_wx_set_freq_rsl
+#define ieee80211_wx_set_rawtx		ieee80211_wx_set_rawtx_rsl
+#define ieee80211_wx_get_name		ieee80211_wx_get_name_rsl
+#define ieee80211_wx_set_power		ieee80211_wx_set_power_rsl
+#define ieee80211_wx_get_power		ieee80211_wx_get_power_rsl
+#define ieee80211_wlan_frequencies	ieee80211_wlan_frequencies_rsl
+#define ieee80211_wx_set_rts		ieee80211_wx_set_rts_rsl
+#define ieee80211_wx_get_rts		ieee80211_wx_get_rts_rsl
+
+#define ieee80211_txb_free		ieee80211_txb_free_rsl
+
+#define ieee80211_wx_set_gen_ie		ieee80211_wx_set_gen_ie_rsl
+#define ieee80211_wx_get_scan		ieee80211_wx_get_scan_rsl
+#define ieee80211_wx_set_encode		ieee80211_wx_set_encode_rsl
+#define ieee80211_wx_get_encode		ieee80211_wx_get_encode_rsl
+#if WIRELESS_EXT >= 18
+#define ieee80211_wx_set_mlme		ieee80211_wx_set_mlme_rsl
+#define ieee80211_wx_set_auth		ieee80211_wx_set_auth_rsl
+#define ieee80211_wx_set_encode_ext	ieee80211_wx_set_encode_ext_rsl
+#define ieee80211_wx_get_encode_ext	ieee80211_wx_get_encode_ext_rsl
+#endif
+
+
+typedef struct ieee_param {
+	u32 cmd;
+	u8 sta_addr[ETH_ALEN];
+        union {
+		struct {
+			u8 name;
+			u32 value;
+		} wpa_param;
+		struct {
+			u32 len;
+			u8 reserved[32];
+			u8 data[0];
+		} wpa_ie;
+	        struct{
+			int command;
+    			int reason_code;
+		} mlme;
+		struct {
+			u8 alg[IEEE_CRYPT_ALG_NAME_LEN];
+			u8 set_tx;
+			u32 err;
+			u8 idx;
+			u8 seq[8]; /* sequence counter (set: RX, get: TX) */
+			u16 key_len;
+			u8 key[0];
+		} crypt;
+	} u;
+}ieee_param;
+
+
+#if WIRELESS_EXT < 17
+#define IW_QUAL_QUAL_INVALID   0x10
+#define IW_QUAL_LEVEL_INVALID  0x20
+#define IW_QUAL_NOISE_INVALID  0x40
+#define IW_QUAL_QUAL_UPDATED   0x1
+#define IW_QUAL_LEVEL_UPDATED  0x2
+#define IW_QUAL_NOISE_UPDATED  0x4
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
+static inline void tq_init(struct tq_struct * task, void(*func)(void *), void *data)
+{
+	task->routine = func;
+	task->data 	= data;
+	//task->next = NULL;
+	INIT_LIST_HEAD(&task->list);
+	task->sync = 0;
+}
+#endif
+
+// linux under 2.6.9 release may not support it, so modify it for common use
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,9))
+//#define MSECS(t)	(1000 * ((t) / HZ) + 1000 * ((t) % HZ) / HZ)
+#define MSECS(t)	(HZ * ((t) / 1000) + (HZ * ((t) % 1000)) / 1000)
+static inline unsigned long msleep_interruptible_rsl(unsigned int msecs)
+{
+         unsigned long timeout = MSECS(msecs) + 1;
+
+         while (timeout) {
+                 set_current_state(TASK_INTERRUPTIBLE);
+                 timeout = schedule_timeout(timeout);
+         }
+         return timeout;
+}
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,31))
+static inline void msleep(unsigned int msecs)
+{
+         unsigned long timeout = MSECS(msecs) + 1;
+
+         while (timeout) {
+                 set_current_state(TASK_UNINTERRUPTIBLE);
+                 timeout = schedule_timeout(timeout);
+         }
+}
+#endif
+#else
+#define MSECS(t) msecs_to_jiffies(t)
+#define msleep_interruptible_rsl  msleep_interruptible
+#endif
+
+#define IEEE80211_DATA_LEN		2304
+/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
+   6.2.1.1.2.
+
+   The figure in section 7.1.2 suggests a body size of up to 2312
+   bytes is allowed, which is a bit confusing, I suspect this
+   represents the 2304 bytes of real data, plus a possible 8 bytes of
+   WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
+#define IEEE80211_1ADDR_LEN 10
+#define IEEE80211_2ADDR_LEN 16
+#define IEEE80211_3ADDR_LEN 24
+#define IEEE80211_4ADDR_LEN 30
+#define IEEE80211_FCS_LEN    4
+#define IEEE80211_HLEN                  (IEEE80211_4ADDR_LEN)
+#define IEEE80211_FRAME_LEN             (IEEE80211_DATA_LEN + IEEE80211_HLEN)
+#define IEEE80211_MGMT_HDR_LEN 24
+#define IEEE80211_DATA_HDR3_LEN 24
+#define IEEE80211_DATA_HDR4_LEN 30
+
+#define MIN_FRAG_THRESHOLD     256U
+#define MAX_FRAG_THRESHOLD     2346U
+
+
+/* Frame control field constants */
+#define IEEE80211_FCTL_VERS		0x0003
+#define IEEE80211_FCTL_FTYPE		0x000c
+#define IEEE80211_FCTL_STYPE		0x00f0
+#define IEEE80211_FCTL_FRAMETYPE	0x00fc
+#define IEEE80211_FCTL_TODS		0x0100
+#define IEEE80211_FCTL_FROMDS		0x0200
+#define IEEE80211_FCTL_DSTODS		0x0300 //added by david
+#define IEEE80211_FCTL_MOREFRAGS	0x0400
+#define IEEE80211_FCTL_RETRY		0x0800
+#define IEEE80211_FCTL_PM		0x1000
+#define IEEE80211_FCTL_MOREDATA		0x2000
+#define IEEE80211_FCTL_WEP		0x4000
+#define IEEE80211_FCTL_ORDER		0x8000
+
+#define IEEE80211_FTYPE_MGMT		0x0000
+#define IEEE80211_FTYPE_CTL		0x0004
+#define IEEE80211_FTYPE_DATA		0x0008
+
+/* management */
+#define IEEE80211_STYPE_ASSOC_REQ	0x0000
+#define IEEE80211_STYPE_ASSOC_RESP 	0x0010
+#define IEEE80211_STYPE_REASSOC_REQ	0x0020
+#define IEEE80211_STYPE_REASSOC_RESP	0x0030
+#define IEEE80211_STYPE_PROBE_REQ	0x0040
+#define IEEE80211_STYPE_PROBE_RESP	0x0050
+#define IEEE80211_STYPE_BEACON		0x0080
+#define IEEE80211_STYPE_ATIM		0x0090
+#define IEEE80211_STYPE_DISASSOC	0x00A0
+#define IEEE80211_STYPE_AUTH		0x00B0
+#define IEEE80211_STYPE_DEAUTH		0x00C0
+#define IEEE80211_STYPE_MANAGE_ACT	0x00D0
+
+/* control */
+#define IEEE80211_STYPE_PSPOLL		0x00A0
+#define IEEE80211_STYPE_RTS		0x00B0
+#define IEEE80211_STYPE_CTS		0x00C0
+#define IEEE80211_STYPE_ACK		0x00D0
+#define IEEE80211_STYPE_CFEND		0x00E0
+#define IEEE80211_STYPE_CFENDACK	0x00F0
+#define IEEE80211_STYPE_BLOCKACK   0x0094
+
+/* data */
+#define IEEE80211_STYPE_DATA		0x0000
+#define IEEE80211_STYPE_DATA_CFACK	0x0010
+#define IEEE80211_STYPE_DATA_CFPOLL	0x0020
+#define IEEE80211_STYPE_DATA_CFACKPOLL	0x0030
+#define IEEE80211_STYPE_NULLFUNC	0x0040
+#define IEEE80211_STYPE_CFACK		0x0050
+#define IEEE80211_STYPE_CFPOLL		0x0060
+#define IEEE80211_STYPE_CFACKPOLL	0x0070
+#define IEEE80211_STYPE_QOS_DATA	0x0080 //added for WMM 2006/8/2
+#define IEEE80211_STYPE_QOS_NULL	0x00C0
+
+#define IEEE80211_SCTL_FRAG		0x000F
+#define IEEE80211_SCTL_SEQ		0xFFF0
+
+/* QOS control */
+#define IEEE80211_QCTL_TID              0x000F
+
+#define	FC_QOS_BIT					BIT7
+#define IsDataFrame(pdu)			( ((pdu[0] & 0x0C)==0x08) ? true : false )
+#define	IsLegacyDataFrame(pdu)	(IsDataFrame(pdu) && (!(pdu[0]&FC_QOS_BIT)) )
+//added by wb. Is this right?
+#define IsQoSDataFrame(pframe)  ((*(u16*)pframe&(IEEE80211_STYPE_QOS_DATA|IEEE80211_FTYPE_DATA)) == (IEEE80211_STYPE_QOS_DATA|IEEE80211_FTYPE_DATA))
+#define Frame_Order(pframe)     (*(u16*)pframe&IEEE80211_FCTL_ORDER)
+#define SN_LESS(a, b)		(((a-b)&0x800)!=0)
+#define SN_EQUAL(a, b)	(a == b)
+#define MAX_DEV_ADDR_SIZE 8
+typedef enum _ACT_CATEGORY{
+        ACT_CAT_QOS = 1,
+        ACT_CAT_DLS = 2,
+        ACT_CAT_BA  = 3,
+        ACT_CAT_HT  = 7,
+        ACT_CAT_WMM = 17,
+} ACT_CATEGORY, *PACT_CATEGORY;
+
+typedef enum _TS_ACTION{
+        ACT_ADDTSREQ = 0,
+        ACT_ADDTSRSP = 1,
+        ACT_DELTS    = 2,
+        ACT_SCHEDULE = 3,
+} TS_ACTION, *PTS_ACTION;
+
+typedef enum _BA_ACTION{
+        ACT_ADDBAREQ = 0,
+        ACT_ADDBARSP = 1,
+        ACT_DELBA    = 2,
+} BA_ACTION, *PBA_ACTION;
+
+typedef enum _InitialGainOpType{
+	IG_Backup=0,
+	IG_Restore,
+	IG_Max
+}InitialGainOpType;
+//added by amy for LED 090319
+//================================================================================
+// LED customization.
+//================================================================================
+typedef enum _LED_CTL_MODE{
+        LED_CTL_POWER_ON = 1,
+        LED_CTL_LINK = 2,
+        LED_CTL_NO_LINK = 3,
+        LED_CTL_TX = 4,
+        LED_CTL_RX = 5,
+        LED_CTL_SITE_SURVEY = 6,
+        LED_CTL_POWER_OFF = 7,
+        LED_CTL_START_TO_LINK = 8,
+        LED_CTL_START_WPS = 9,
+        LED_CTL_STOP_WPS = 10,
+        LED_CTL_START_WPS_BOTTON = 11, //added for runtop
+}LED_CTL_MODE;
+
+/* debug macros */
+#define CONFIG_IEEE80211_DEBUG
+#ifdef CONFIG_IEEE80211_DEBUG
+extern u32 ieee80211_debug_level;
+#define IEEE80211_DEBUG(level, fmt, args...) \
+do { if (ieee80211_debug_level & (level)) \
+  printk(KERN_DEBUG "ieee80211: " fmt, ## args); } while (0)
+//wb added to debug out data buf
+//if you want print DATA buffer related BA, please set ieee80211_debug_level to DATA|BA
+#define IEEE80211_DEBUG_DATA(level, data, datalen)	\
+	do{ if ((ieee80211_debug_level & (level)) == (level))	\
+		{ 	\
+			int i;					\
+			u8* pdata = (u8*) data;			\
+			printk(KERN_DEBUG "ieee80211: %s()\n", __FUNCTION__);	\
+			for(i=0; i<(int)(datalen); i++)			\
+			{						\
+				printk("%2x ", pdata[i]);		\
+				if ((i+1)%16 == 0) printk("\n");	\
+			}				\
+			printk("\n");			\
+		}					\
+	} while (0)
+#else
+#define IEEE80211_DEBUG(level, fmt, args...) do {} while (0)
+#define IEEE80211_DEBUG_DATA(level, data, datalen) do {} while(0)
+#endif	/* CONFIG_IEEE80211_DEBUG */
+
+/* debug macros not dependent on CONFIG_IEEE80211_DEBUG */
+
+#define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
+#define MAC_ARG(x) ((u8*)(x))[0],((u8*)(x))[1],((u8*)(x))[2],((u8*)(x))[3],((u8*)(x))[4],((u8*)(x))[5]
+
+/*
+ * To use the debug system;
+ *
+ * If you are defining a new debug classification, simply add it to the #define
+ * list here in the form of:
+ *
+ * #define IEEE80211_DL_xxxx VALUE
+ *
+ * shifting value to the left one bit from the previous entry.  xxxx should be
+ * the name of the classification (for example, WEP)
+ *
+ * You then need to either add a IEEE80211_xxxx_DEBUG() macro definition for your
+ * classification, or use IEEE80211_DEBUG(IEEE80211_DL_xxxx, ...) whenever you want
+ * to send output to that classification.
+ *
+ * To add your debug level to the list of levels seen when you perform
+ *
+ * % cat /proc/net/ipw/debug_level
+ *
+ * you simply need to add your entry to the ipw_debug_levels array.
+ *
+ * If you do not see debug_level in /proc/net/ipw then you do not have
+ * CONFIG_IEEE80211_DEBUG defined in your kernel configuration
+ *
+ */
+
+#define IEEE80211_DL_INFO          (1<<0)
+#define IEEE80211_DL_WX            (1<<1)
+#define IEEE80211_DL_SCAN          (1<<2)
+#define IEEE80211_DL_STATE         (1<<3)
+#define IEEE80211_DL_MGMT          (1<<4)
+#define IEEE80211_DL_FRAG          (1<<5)
+#define IEEE80211_DL_EAP           (1<<6)
+#define IEEE80211_DL_DROP          (1<<7)
+
+#define IEEE80211_DL_TX            (1<<8)
+#define IEEE80211_DL_RX            (1<<9)
+
+#define IEEE80211_DL_HT		   (1<<10)  //HT
+#define IEEE80211_DL_BA		   (1<<11)  //ba
+#define IEEE80211_DL_TS		   (1<<12)  //TS
+#define IEEE80211_DL_QOS           (1<<13)
+#define IEEE80211_DL_REORDER	   (1<<14)
+#define IEEE80211_DL_IOT	   (1<<15)
+#define IEEE80211_DL_IPS	   (1<<16)
+#define IEEE80211_DL_TRACE	   (1<<29)  //trace function, need to user net_ratelimit() together in order not to print too much to the screen
+#define IEEE80211_DL_DATA	   (1<<30)   //use this flag to control whether print data buf out.
+#define IEEE80211_DL_ERR	   (1<<31)   //always open
+#define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
+#define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
+#define IEEE80211_DEBUG_INFO(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
+
+#define IEEE80211_DEBUG_WX(f, a...)     IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a)
+#define IEEE80211_DEBUG_SCAN(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a)
+#define IEEE80211_DEBUG_STATE(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a)
+#define IEEE80211_DEBUG_MGMT(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a)
+#define IEEE80211_DEBUG_FRAG(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a)
+#define IEEE80211_DEBUG_EAP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a)
+#define IEEE80211_DEBUG_DROP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a)
+#define IEEE80211_DEBUG_TX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a)
+#define IEEE80211_DEBUG_RX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a)
+#define IEEE80211_DEBUG_QOS(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_QOS, f, ## a)
+
+#ifdef CONFIG_IEEE80211_DEBUG
+/* Added by Annie, 2005-11-22. */
+#define MAX_STR_LEN     64
+/* I want to see ASCII 33 to 126 only. Otherwise, I print '?'. Annie, 2005-11-22.*/
+#define PRINTABLE(_ch)  (_ch>'!' && _ch<'~')
+#define IEEE80211_PRINT_STR(_Comp, _TitleString, _Ptr, _Len)                            	\
+                        if((_Comp) & level)   							\
+                        {                                                                       \
+                                int             __i;                                            \
+                                u8  buffer[MAX_STR_LEN];                                    	\
+                                int length = (_Len<MAX_STR_LEN)? _Len : (MAX_STR_LEN-1) ;  	\
+                                memset(buffer, 0, MAX_STR_LEN);                      		\
+                                memcpy(buffer, (u8 *)_Ptr, length );            		\
+                                for( __i=0; __i<MAX_STR_LEN; __i++ )                            \
+                                {                                                               \
+                                     if( !PRINTABLE(buffer[__i]) )   buffer[__i] = '?';     	\
+                                }                                                               \
+                                buffer[length] = '\0';                                          \
+                                printk("Rtl819x: ");                                         	\
+                                printk(_TitleString);                                         \
+                                printk(": %d, <%s>\n", _Len, buffer);                         \
+                        }
+#else
+#define IEEE80211_PRINT_STR(_Comp, _TitleString, _Ptr, _Len)  do {} while (0)
+#endif
+
+#include <linux/netdevice.h>
+#include <linux/if_arp.h> /* ARPHRD_ETHER */
+
+#ifndef WIRELESS_SPY
+#define WIRELESS_SPY		// enable iwspy support
+#endif
+#include <net/iw_handler.h>	// new driver API
+
+#ifndef ETH_P_PAE
+#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
+#endif /* ETH_P_PAE */
+
+#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
+
+#ifndef ETH_P_80211_RAW
+#define ETH_P_80211_RAW (ETH_P_ECONET + 1)
+#endif
+
+/* IEEE 802.11 defines */
+
+#define P80211_OUI_LEN 3
+
+struct ieee80211_snap_hdr {
+
+        u8    dsap;   /* always 0xAA */
+        u8    ssap;   /* always 0xAA */
+        u8    ctrl;   /* always 0x03 */
+        u8    oui[P80211_OUI_LEN];    /* organizational universal id */
+
+} __attribute__ ((packed));
+
+#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
+
+#define WLAN_FC_GET_VERS(fc) ((fc) & IEEE80211_FCTL_VERS)
+#define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
+#define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
+
+#define WLAN_FC_GET_FRAMETYPE(fc) ((fc) & IEEE80211_FCTL_FRAMETYPE)
+#define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
+#define WLAN_GET_SEQ_SEQ(seq)  (((seq) & IEEE80211_SCTL_SEQ) >> 4)
+
+/* Authentication algorithms */
+#define WLAN_AUTH_OPEN 0
+#define WLAN_AUTH_SHARED_KEY 1
+#define WLAN_AUTH_LEAP 2
+
+#define WLAN_AUTH_CHALLENGE_LEN 128
+
+#define WLAN_CAPABILITY_BSS (1<<0)
+#define WLAN_CAPABILITY_IBSS (1<<1)
+#define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
+#define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
+#define WLAN_CAPABILITY_PRIVACY (1<<4)
+#define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5)
+#define WLAN_CAPABILITY_PBCC (1<<6)
+#define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7)
+#define WLAN_CAPABILITY_SPECTRUM_MGMT (1<<8)
+#define WLAN_CAPABILITY_QOS (1<<9)
+#define WLAN_CAPABILITY_SHORT_SLOT (1<<10)
+#define WLAN_CAPABILITY_DSSS_OFDM (1<<13)
+
+/* 802.11g ERP information element */
+#define WLAN_ERP_NON_ERP_PRESENT (1<<0)
+#define WLAN_ERP_USE_PROTECTION (1<<1)
+#define WLAN_ERP_BARKER_PREAMBLE (1<<2)
+
+/* Status codes */
+enum ieee80211_statuscode {
+        WLAN_STATUS_SUCCESS = 0,
+        WLAN_STATUS_UNSPECIFIED_FAILURE = 1,
+        WLAN_STATUS_CAPS_UNSUPPORTED = 10,
+        WLAN_STATUS_REASSOC_NO_ASSOC = 11,
+        WLAN_STATUS_ASSOC_DENIED_UNSPEC = 12,
+        WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG = 13,
+        WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION = 14,
+        WLAN_STATUS_CHALLENGE_FAIL = 15,
+        WLAN_STATUS_AUTH_TIMEOUT = 16,
+        WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA = 17,
+        WLAN_STATUS_ASSOC_DENIED_RATES = 18,
+        /* 802.11b */
+        WLAN_STATUS_ASSOC_DENIED_NOSHORTPREAMBLE = 19,
+        WLAN_STATUS_ASSOC_DENIED_NOPBCC = 20,
+        WLAN_STATUS_ASSOC_DENIED_NOAGILITY = 21,
+        /* 802.11h */
+        WLAN_STATUS_ASSOC_DENIED_NOSPECTRUM = 22,
+        WLAN_STATUS_ASSOC_REJECTED_BAD_POWER = 23,
+        WLAN_STATUS_ASSOC_REJECTED_BAD_SUPP_CHAN = 24,
+        /* 802.11g */
+        WLAN_STATUS_ASSOC_DENIED_NOSHORTTIME = 25,
+        WLAN_STATUS_ASSOC_DENIED_NODSSSOFDM = 26,
+        /* 802.11i */
+        WLAN_STATUS_INVALID_IE = 40,
+        WLAN_STATUS_INVALID_GROUP_CIPHER = 41,
+        WLAN_STATUS_INVALID_PAIRWISE_CIPHER = 42,
+        WLAN_STATUS_INVALID_AKMP = 43,
+        WLAN_STATUS_UNSUPP_RSN_VERSION = 44,
+        WLAN_STATUS_INVALID_RSN_IE_CAP = 45,
+        WLAN_STATUS_CIPHER_SUITE_REJECTED = 46,
+};
+
+/* Reason codes */
+enum ieee80211_reasoncode {
+        WLAN_REASON_UNSPECIFIED = 1,
+        WLAN_REASON_PREV_AUTH_NOT_VALID = 2,
+        WLAN_REASON_DEAUTH_LEAVING = 3,
+        WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY = 4,
+        WLAN_REASON_DISASSOC_AP_BUSY = 5,
+        WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA = 6,
+        WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA = 7,
+        WLAN_REASON_DISASSOC_STA_HAS_LEFT = 8,
+        WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH = 9,
+        /* 802.11h */
+        WLAN_REASON_DISASSOC_BAD_POWER = 10,
+        WLAN_REASON_DISASSOC_BAD_SUPP_CHAN = 11,
+        /* 802.11i */
+        WLAN_REASON_INVALID_IE = 13,
+        WLAN_REASON_MIC_FAILURE = 14,
+        WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT = 15,
+        WLAN_REASON_GROUP_KEY_HANDSHAKE_TIMEOUT = 16,
+        WLAN_REASON_IE_DIFFERENT = 17,
+        WLAN_REASON_INVALID_GROUP_CIPHER = 18,
+        WLAN_REASON_INVALID_PAIRWISE_CIPHER = 19,
+        WLAN_REASON_INVALID_AKMP = 20,
+        WLAN_REASON_UNSUPP_RSN_VERSION = 21,
+        WLAN_REASON_INVALID_RSN_IE_CAP = 22,
+        WLAN_REASON_IEEE8021X_FAILED = 23,
+        WLAN_REASON_CIPHER_SUITE_REJECTED = 24,
+};
+
+#define IEEE80211_STATMASK_SIGNAL (1<<0)
+#define IEEE80211_STATMASK_RSSI (1<<1)
+#define IEEE80211_STATMASK_NOISE (1<<2)
+#define IEEE80211_STATMASK_RATE (1<<3)
+#define IEEE80211_STATMASK_WEMASK 0x7
+
+#define IEEE80211_CCK_MODULATION    (1<<0)
+#define IEEE80211_OFDM_MODULATION   (1<<1)
+
+#define IEEE80211_24GHZ_BAND     (1<<0)
+#define IEEE80211_52GHZ_BAND     (1<<1)
+
+#define IEEE80211_CCK_RATE_LEN  		4
+#define IEEE80211_CCK_RATE_1MB		        0x02
+#define IEEE80211_CCK_RATE_2MB		        0x04
+#define IEEE80211_CCK_RATE_5MB		        0x0B
+#define IEEE80211_CCK_RATE_11MB		        0x16
+#define IEEE80211_OFDM_RATE_LEN 		8
+#define IEEE80211_OFDM_RATE_6MB		        0x0C
+#define IEEE80211_OFDM_RATE_9MB		        0x12
+#define IEEE80211_OFDM_RATE_12MB		0x18
+#define IEEE80211_OFDM_RATE_18MB		0x24
+#define IEEE80211_OFDM_RATE_24MB		0x30
+#define IEEE80211_OFDM_RATE_36MB		0x48
+#define IEEE80211_OFDM_RATE_48MB		0x60
+#define IEEE80211_OFDM_RATE_54MB		0x6C
+#define IEEE80211_BASIC_RATE_MASK		0x80
+
+#define IEEE80211_CCK_RATE_1MB_MASK		(1<<0)
+#define IEEE80211_CCK_RATE_2MB_MASK		(1<<1)
+#define IEEE80211_CCK_RATE_5MB_MASK		(1<<2)
+#define IEEE80211_CCK_RATE_11MB_MASK		(1<<3)
+#define IEEE80211_OFDM_RATE_6MB_MASK		(1<<4)
+#define IEEE80211_OFDM_RATE_9MB_MASK		(1<<5)
+#define IEEE80211_OFDM_RATE_12MB_MASK		(1<<6)
+#define IEEE80211_OFDM_RATE_18MB_MASK		(1<<7)
+#define IEEE80211_OFDM_RATE_24MB_MASK		(1<<8)
+#define IEEE80211_OFDM_RATE_36MB_MASK		(1<<9)
+#define IEEE80211_OFDM_RATE_48MB_MASK		(1<<10)
+#define IEEE80211_OFDM_RATE_54MB_MASK		(1<<11)
+
+#define IEEE80211_CCK_RATES_MASK	        0x0000000F
+#define IEEE80211_CCK_BASIC_RATES_MASK	(IEEE80211_CCK_RATE_1MB_MASK | \
+	IEEE80211_CCK_RATE_2MB_MASK)
+#define IEEE80211_CCK_DEFAULT_RATES_MASK	(IEEE80211_CCK_BASIC_RATES_MASK | \
+        IEEE80211_CCK_RATE_5MB_MASK | \
+        IEEE80211_CCK_RATE_11MB_MASK)
+
+#define IEEE80211_OFDM_RATES_MASK		0x00000FF0
+#define IEEE80211_OFDM_BASIC_RATES_MASK	(IEEE80211_OFDM_RATE_6MB_MASK | \
+	IEEE80211_OFDM_RATE_12MB_MASK | \
+	IEEE80211_OFDM_RATE_24MB_MASK)
+#define IEEE80211_OFDM_DEFAULT_RATES_MASK	(IEEE80211_OFDM_BASIC_RATES_MASK | \
+	IEEE80211_OFDM_RATE_9MB_MASK  | \
+	IEEE80211_OFDM_RATE_18MB_MASK | \
+	IEEE80211_OFDM_RATE_36MB_MASK | \
+	IEEE80211_OFDM_RATE_48MB_MASK | \
+	IEEE80211_OFDM_RATE_54MB_MASK)
+#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
+                                IEEE80211_CCK_DEFAULT_RATES_MASK)
+
+#define IEEE80211_NUM_OFDM_RATES	    8
+#define IEEE80211_NUM_CCK_RATES	            4
+#define IEEE80211_OFDM_SHIFT_MASK_A         4
+
+
+/* this is stolen and modified from the madwifi driver*/
+#define IEEE80211_FC0_TYPE_MASK		0x0c
+#define IEEE80211_FC0_TYPE_DATA		0x08
+#define IEEE80211_FC0_SUBTYPE_MASK	0xB0
+#define IEEE80211_FC0_SUBTYPE_QOS	0x80
+
+#define IEEE80211_QOS_HAS_SEQ(fc) \
+	(((fc) & (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == \
+	 (IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS))
+
+/* this is stolen from ipw2200 driver */
+#define IEEE_IBSS_MAC_HASH_SIZE 31
+struct ieee_ibss_seq {
+	u8 mac[ETH_ALEN];
+	u16 seq_num[17];
+	u16 frag_num[17];
+	unsigned long packet_time[17];
+	struct list_head list;
+};
+
+/* NOTE: This data is for statistical purposes; not all hardware provides this
+ *       information for frames received.  Not setting these will not cause
+ *       any adverse affects. */
+struct ieee80211_rx_stats {
+#if 1
+	u32 mac_time[2];
+	s8 rssi;
+	u8 signal;
+	u8 noise;
+	u16 rate; /* in 100 kbps */
+	u8 received_channel;
+	u8 control;
+	u8 mask;
+	u8 freq;
+	u16 len;
+	u64 tsf;
+	u32 beacon_time;
+	u8 nic_type;
+	u16       Length;
+	//      u8        DataRate;      // In 0.5 Mbps
+	u8        SignalQuality; // in 0-100 index.
+	s32       RecvSignalPower; // Real power in dBm for this packet, no beautification and aggregation.
+	s8        RxPower; // in dBm Translate from PWdB
+	u8        SignalStrength; // in 0-100 index.
+	u16       bHwError:1;
+	u16       bCRC:1;
+	u16       bICV:1;
+	u16       bShortPreamble:1;
+	u16       Antenna:1;      //for rtl8185
+	u16       Decrypted:1;    //for rtl8185, rtl8187
+	u16       Wakeup:1;       //for rtl8185
+	u16       Reserved0:1;    //for rtl8185
+	u8        AGC;
+	u32       TimeStampLow;
+	u32       TimeStampHigh;
+	bool      bShift;
+	bool      bIsQosData;             // Added by Annie, 2005-12-22.
+	u8        UserPriority;
+
+	//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
+	//1Attention Please!!!<11n or 8190 specific code should be put below this line>
+	//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
+	u8        RxDrvInfoSize;
+	u8        RxBufShift;
+	bool      bIsAMPDU;
+	bool      bFirstMPDU;
+	bool      bContainHTC;
+	bool      RxIs40MHzPacket;
+	u32       RxPWDBAll;
+	u8        RxMIMOSignalStrength[4];        // in 0~100 index
+	s8        RxMIMOSignalQuality[2];
+	bool      bPacketMatchBSSID;
+	bool      bIsCCK;
+	bool      bPacketToSelf;
+	//added by amy
+	u8*       virtual_address;
+	u16          packetlength;              // Total packet length: Must equal to sum of all FragLength
+	u16          fraglength;                        // FragLength should equal to PacketLength in non-fragment case
+	u16          fragoffset;                        // Data offset for this fragment
+	u16          ntotalfrag;
+	bool      	  bisrxaggrsubframe;
+	bool		  bPacketBeacon;	//cosa add for rssi
+	bool		  bToSelfBA;		//cosa add for rssi
+	char 	  cck_adc_pwdb[4];	//cosa add for rx path selection
+	u16		  Seq_Num;
+	u8		nTotalAggPkt;		// Number of aggregated packets.
+#endif
+
+};
+
+/* IEEE 802.11 requires that STA supports concurrent reception of at least
+ * three fragmented frames. This define can be increased to support more
+ * concurrent frames, but it should be noted that each entry can consume about
+ * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
+#define IEEE80211_FRAG_CACHE_LEN 4
+
+struct ieee80211_frag_entry {
+	unsigned long first_frag_time;
+	unsigned int seq;
+	unsigned int last_frag;
+	struct sk_buff *skb;
+	u8 src_addr[ETH_ALEN];
+	u8 dst_addr[ETH_ALEN];
+};
+
+struct ieee80211_stats {
+	unsigned int tx_unicast_frames;
+	unsigned int tx_multicast_frames;
+	unsigned int tx_fragments;
+	unsigned int tx_unicast_octets;
+	unsigned int tx_multicast_octets;
+	unsigned int tx_deferred_transmissions;
+	unsigned int tx_single_retry_frames;
+	unsigned int tx_multiple_retry_frames;
+	unsigned int tx_retry_limit_exceeded;
+	unsigned int tx_discards;
+	unsigned int rx_unicast_frames;
+	unsigned int rx_multicast_frames;
+	unsigned int rx_fragments;
+	unsigned int rx_unicast_octets;
+	unsigned int rx_multicast_octets;
+	unsigned int rx_fcs_errors;
+	unsigned int rx_discards_no_buffer;
+	unsigned int tx_discards_wrong_sa;
+	unsigned int rx_discards_undecryptable;
+	unsigned int rx_message_in_msg_fragments;
+	unsigned int rx_message_in_bad_msg_fragments;
+};
+
+struct ieee80211_device;
+
+#include "ieee80211_crypt.h"
+
+#define SEC_KEY_1         (1<<0)
+#define SEC_KEY_2         (1<<1)
+#define SEC_KEY_3         (1<<2)
+#define SEC_KEY_4         (1<<3)
+#define SEC_ACTIVE_KEY    (1<<4)
+#define SEC_AUTH_MODE     (1<<5)
+#define SEC_UNICAST_GROUP (1<<6)
+#define SEC_LEVEL         (1<<7)
+#define SEC_ENABLED       (1<<8)
+#define SEC_ENCRYPT       (1<<9)
+
+#define SEC_LEVEL_0      0 /* None */
+#define SEC_LEVEL_1      1 /* WEP 40 and 104 bit */
+#define SEC_LEVEL_2      2 /* Level 1 + TKIP */
+#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
+#define SEC_LEVEL_3      4 /* Level 2 + CCMP */
+
+#define SEC_ALG_NONE            0
+#define SEC_ALG_WEP             1
+#define SEC_ALG_TKIP            2
+#define SEC_ALG_CCMP            3
+
+#define WEP_KEYS 		4
+#define WEP_KEY_LEN		13
+#define SCM_KEY_LEN             32
+#define SCM_TEMPORAL_KEY_LENGTH 16
+
+struct ieee80211_security {
+	u16 active_key:2,
+            enabled:1,
+	    auth_mode:2,
+            auth_algo:4,
+            unicast_uses_group:1,
+	    encrypt:1;
+	u8 key_sizes[WEP_KEYS];
+	u8 keys[WEP_KEYS][SCM_KEY_LEN];
+	u8 level;
+	u16 flags;
+} __attribute__ ((packed));
+
+
+/*
+ 802.11 data frame from AP
+      ,-------------------------------------------------------------------.
+Bytes |  2   |  2   |    6    |    6    |    6    |  2   | 0..2312 |   4  |
+      |------|------|---------|---------|---------|------|---------|------|
+Desc. | ctrl | dura |  DA/RA  |   TA    |    SA   | Sequ |  frame  |  fcs |
+      |      | tion | (BSSID) |         |         | ence |  data   |      |
+      `-------------------------------------------------------------------'
+Total: 28-2340 bytes
+*/
+
+/* Management Frame Information Element Types */
+enum ieee80211_mfie {
+        MFIE_TYPE_SSID = 0,
+        MFIE_TYPE_RATES = 1,
+        MFIE_TYPE_FH_SET = 2,
+        MFIE_TYPE_DS_SET = 3,
+        MFIE_TYPE_CF_SET = 4,
+        MFIE_TYPE_TIM = 5,
+        MFIE_TYPE_IBSS_SET = 6,
+        MFIE_TYPE_COUNTRY = 7,
+        MFIE_TYPE_HOP_PARAMS = 8,
+        MFIE_TYPE_HOP_TABLE = 9,
+        MFIE_TYPE_REQUEST = 10,
+        MFIE_TYPE_CHALLENGE = 16,
+        MFIE_TYPE_POWER_CONSTRAINT = 32,
+        MFIE_TYPE_POWER_CAPABILITY = 33,
+        MFIE_TYPE_TPC_REQUEST = 34,
+        MFIE_TYPE_TPC_REPORT = 35,
+        MFIE_TYPE_SUPP_CHANNELS = 36,
+        MFIE_TYPE_CSA = 37,
+        MFIE_TYPE_MEASURE_REQUEST = 38,
+        MFIE_TYPE_MEASURE_REPORT = 39,
+        MFIE_TYPE_QUIET = 40,
+        MFIE_TYPE_IBSS_DFS = 41,
+        MFIE_TYPE_ERP = 42,
+        MFIE_TYPE_RSN = 48,
+        MFIE_TYPE_RATES_EX = 50,
+        MFIE_TYPE_HT_CAP= 45,
+	 MFIE_TYPE_HT_INFO= 61,
+	 MFIE_TYPE_AIRONET=133,
+        MFIE_TYPE_GENERIC = 221,
+        MFIE_TYPE_QOS_PARAMETER = 222,
+};
+
+/* Minimal header; can be used for passing 802.11 frames with sufficient
+ * information to determine what type of underlying data type is actually
+ * stored in the data. */
+struct ieee80211_hdr {
+        __le16 frame_ctl;
+        __le16 duration_id;
+        u8 payload[0];
+} __attribute__ ((packed));
+
+struct ieee80211_hdr_1addr {
+        __le16 frame_ctl;
+        __le16 duration_id;
+        u8 addr1[ETH_ALEN];
+        u8 payload[0];
+} __attribute__ ((packed));
+
+struct ieee80211_hdr_2addr {
+        __le16 frame_ctl;
+        __le16 duration_id;
+        u8 addr1[ETH_ALEN];
+        u8 addr2[ETH_ALEN];
+        u8 payload[0];
+} __attribute__ ((packed));
+
+struct ieee80211_hdr_3addr {
+	__le16 frame_ctl;
+	__le16 duration_id;
+	u8 addr1[ETH_ALEN];
+	u8 addr2[ETH_ALEN];
+	u8 addr3[ETH_ALEN];
+	__le16 seq_ctl;
+        u8 payload[0];
+} __attribute__ ((packed));
+
+struct ieee80211_hdr_4addr {
+	__le16 frame_ctl;
+	__le16 duration_id;
+	u8 addr1[ETH_ALEN];
+	u8 addr2[ETH_ALEN];
+	u8 addr3[ETH_ALEN];
+	__le16 seq_ctl;
+	u8 addr4[ETH_ALEN];
+        u8 payload[0];
+} __attribute__ ((packed));
+
+struct ieee80211_hdr_3addrqos {
+	__le16 frame_ctl;
+	__le16 duration_id;
+	u8 addr1[ETH_ALEN];
+	u8 addr2[ETH_ALEN];
+	u8 addr3[ETH_ALEN];
+	__le16 seq_ctl;
+        u8 payload[0];
+	__le16 qos_ctl;
+} __attribute__ ((packed));
+
+struct ieee80211_hdr_4addrqos {
+	__le16 frame_ctl;
+	__le16 duration_id;
+	u8 addr1[ETH_ALEN];
+	u8 addr2[ETH_ALEN];
+	u8 addr3[ETH_ALEN];
+	__le16 seq_ctl;
+	u8 addr4[ETH_ALEN];
+        u8 payload[0];
+	__le16 qos_ctl;
+} __attribute__ ((packed));
+
+struct ieee80211_info_element {
+	u8 id;
+	u8 len;
+	u8 data[0];
+} __attribute__ ((packed));
+
+struct ieee80211_authentication {
+	struct ieee80211_hdr_3addr header;
+	__le16 algorithm;
+	__le16 transaction;
+	__le16 status;
+	/*challenge*/
+	struct ieee80211_info_element info_element[0];
+} __attribute__ ((packed));
+
+struct ieee80211_disassoc {
+        struct ieee80211_hdr_3addr header;
+        __le16 reason;
+} __attribute__ ((packed));
+
+struct ieee80211_probe_request {
+	struct ieee80211_hdr_3addr header;
+	/* SSID, supported rates */
+        struct ieee80211_info_element info_element[0];
+} __attribute__ ((packed));
+
+struct ieee80211_probe_response {
+	struct ieee80211_hdr_3addr header;
+	u32 time_stamp[2];
+	__le16 beacon_interval;
+	__le16 capability;
+        /* SSID, supported rates, FH params, DS params,
+         * CF params, IBSS params, TIM (if beacon), RSN */
+        struct ieee80211_info_element info_element[0];
+} __attribute__ ((packed));
+
+/* Alias beacon for probe_response */
+#define ieee80211_beacon ieee80211_probe_response
+
+struct ieee80211_assoc_request_frame {
+	struct ieee80211_hdr_3addr header;
+	__le16 capability;
+	__le16 listen_interval;
+	/* SSID, supported rates, RSN */
+        struct ieee80211_info_element info_element[0];
+} __attribute__ ((packed));
+
+struct ieee80211_reassoc_request_frame {
+	struct ieee80211_hdr_3addr header;
+	__le16 capability;
+	__le16 listen_interval;
+	u8 current_ap[ETH_ALEN];
+	/* SSID, supported rates, RSN */
+        struct ieee80211_info_element info_element[0];
+} __attribute__ ((packed));
+
+struct ieee80211_assoc_response_frame {
+	struct ieee80211_hdr_3addr header;
+	__le16 capability;
+	__le16 status;
+	__le16 aid;
+	struct ieee80211_info_element info_element[0]; /* supported rates */
+} __attribute__ ((packed));
+
+struct ieee80211_txb {
+	u8 nr_frags;
+	u8 encrypted;
+	u8 queue_index;
+	u8 rts_included;
+	u16 reserved;
+	__le16 frag_size;
+	__le16 payload_size;
+	struct sk_buff *fragments[0];
+};
+
+#define MAX_TX_AGG_COUNT		  16
+struct ieee80211_drv_agg_txb {
+	u8 nr_drv_agg_frames;
+	struct sk_buff *tx_agg_frames[MAX_TX_AGG_COUNT];
+}__attribute__((packed));
+
+#define MAX_SUBFRAME_COUNT 		  64
+struct ieee80211_rxb {
+	u8 nr_subframes;
+	struct sk_buff *subframes[MAX_SUBFRAME_COUNT];
+	u8 dst[ETH_ALEN];
+	u8 src[ETH_ALEN];
+}__attribute__((packed));
+
+typedef union _frameqos {
+	u16 shortdata;
+	u8  chardata[2];
+	struct {
+		u16 tid:4;
+		u16 eosp:1;
+		u16 ack_policy:2;
+		u16 reserved:1;
+		u16 txop:8;
+	}field;
+}frameqos,*pframeqos;
+
+/* SWEEP TABLE ENTRIES NUMBER*/
+#define MAX_SWEEP_TAB_ENTRIES		  42
+#define MAX_SWEEP_TAB_ENTRIES_PER_PACKET  7
+/* MAX_RATES_LENGTH needs to be 12.  The spec says 8, and many APs
+ * only use 8, and then use extended rates for the remaining supported
+ * rates.  Other APs, however, stick all of their supported rates on the
+ * main rates information element... */
+#define MAX_RATES_LENGTH                  ((u8)12)
+#define MAX_RATES_EX_LENGTH               ((u8)16)
+#define MAX_NETWORK_COUNT                  128
+
+#define MAX_CHANNEL_NUMBER                 161
+#define IEEE80211_SOFTMAC_SCAN_TIME	   100
+//(HZ / 2)
+#define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2)
+
+#define CRC_LENGTH                 4U
+
+#define MAX_WPA_IE_LEN 64
+
+#define NETWORK_EMPTY_ESSID (1<<0)
+#define NETWORK_HAS_OFDM    (1<<1)
+#define NETWORK_HAS_CCK     (1<<2)
+
+/* QoS structure */
+#define NETWORK_HAS_QOS_PARAMETERS      (1<<3)
+#define NETWORK_HAS_QOS_INFORMATION     (1<<4)
+#define NETWORK_HAS_QOS_MASK            (NETWORK_HAS_QOS_PARAMETERS | \
+                                         NETWORK_HAS_QOS_INFORMATION)
+/* 802.11h */
+#define NETWORK_HAS_POWER_CONSTRAINT    (1<<5)
+#define NETWORK_HAS_CSA                 (1<<6)
+#define NETWORK_HAS_QUIET               (1<<7)
+#define NETWORK_HAS_IBSS_DFS            (1<<8)
+#define NETWORK_HAS_TPC_REPORT          (1<<9)
+
+#define NETWORK_HAS_ERP_VALUE           (1<<10)
+
+#define QOS_QUEUE_NUM                   4
+#define QOS_OUI_LEN                     3
+#define QOS_OUI_TYPE                    2
+#define QOS_ELEMENT_ID                  221
+#define QOS_OUI_INFO_SUB_TYPE           0
+#define QOS_OUI_PARAM_SUB_TYPE          1
+#define QOS_VERSION_1                   1
+#define QOS_AIFSN_MIN_VALUE             2
+#if 1
+struct ieee80211_qos_information_element {
+        u8 elementID;
+        u8 length;
+        u8 qui[QOS_OUI_LEN];
+        u8 qui_type;
+        u8 qui_subtype;
+        u8 version;
+        u8 ac_info;
+} __attribute__ ((packed));
+
+struct ieee80211_qos_ac_parameter {
+        u8 aci_aifsn;
+        u8 ecw_min_max;
+        __le16 tx_op_limit;
+} __attribute__ ((packed));
+
+struct ieee80211_qos_parameter_info {
+        struct ieee80211_qos_information_element info_element;
+        u8 reserved;
+        struct ieee80211_qos_ac_parameter ac_params_record[QOS_QUEUE_NUM];
+} __attribute__ ((packed));
+
+struct ieee80211_qos_parameters {
+        __le16 cw_min[QOS_QUEUE_NUM];
+        __le16 cw_max[QOS_QUEUE_NUM];
+        u8 aifs[QOS_QUEUE_NUM];
+        u8 flag[QOS_QUEUE_NUM];
+        __le16 tx_op_limit[QOS_QUEUE_NUM];
+} __attribute__ ((packed));
+
+struct ieee80211_qos_data {
+        struct ieee80211_qos_parameters parameters;
+        int active;
+        int supported;
+        u8 param_count;
+        u8 old_param_count;
+};
+
+struct ieee80211_tim_parameters {
+        u8 tim_count;
+        u8 tim_period;
+} __attribute__ ((packed));
+
+//#else
+struct ieee80211_wmm_ac_param {
+	u8 ac_aci_acm_aifsn;
+	u8 ac_ecwmin_ecwmax;
+	u16 ac_txop_limit;
+};
+
+struct ieee80211_wmm_ts_info {
+	u8 ac_dir_tid;
+	u8 ac_up_psb;
+	u8 reserved;
+} __attribute__ ((packed));
+
+struct ieee80211_wmm_tspec_elem {
+	struct ieee80211_wmm_ts_info ts_info;
+	u16 norm_msdu_size;
+	u16 max_msdu_size;
+	u32 min_serv_inter;
+	u32 max_serv_inter;
+	u32 inact_inter;
+	u32 suspen_inter;
+	u32 serv_start_time;
+	u32 min_data_rate;
+	u32 mean_data_rate;
+	u32 peak_data_rate;
+	u32 max_burst_size;
+	u32 delay_bound;
+	u32 min_phy_rate;
+	u16 surp_band_allow;
+	u16 medium_time;
+}__attribute__((packed));
+#endif
+enum eap_type {
+	EAP_PACKET = 0,
+	EAPOL_START,
+	EAPOL_LOGOFF,
+	EAPOL_KEY,
+	EAPOL_ENCAP_ASF_ALERT
+};
+
+static const char *eap_types[] = {
+	[EAP_PACKET]		= "EAP-Packet",
+	[EAPOL_START]		= "EAPOL-Start",
+	[EAPOL_LOGOFF]		= "EAPOL-Logoff",
+	[EAPOL_KEY]		= "EAPOL-Key",
+	[EAPOL_ENCAP_ASF_ALERT]	= "EAPOL-Encap-ASF-Alert"
+};
+
+static inline const char *eap_get_type(int type)
+{
+	return ((u32)type >= ARRAY_SIZE(eap_types)) ? "Unknown" : eap_types[type];
+}
+//added by amy for reorder
+static inline u8 Frame_QoSTID(u8* buf)
+{
+	struct ieee80211_hdr_3addr *hdr;
+	u16 fc;
+	hdr = (struct ieee80211_hdr_3addr *)buf;
+	fc = le16_to_cpu(hdr->frame_ctl);
+	return (u8)((frameqos*)(buf + (((fc & IEEE80211_FCTL_TODS)&&(fc & IEEE80211_FCTL_FROMDS))? 30 : 24)))->field.tid;
+}
+
+//added by amy for reorder
+
+struct eapol {
+	u8 snap[6];
+	u16 ethertype;
+	u8 version;
+	u8 type;
+	u16 length;
+} __attribute__ ((packed));
+
+struct ieee80211_softmac_stats{
+	unsigned int rx_ass_ok;
+	unsigned int rx_ass_err;
+	unsigned int rx_probe_rq;
+	unsigned int tx_probe_rs;
+	unsigned int tx_beacons;
+	unsigned int rx_auth_rq;
+	unsigned int rx_auth_rs_ok;
+	unsigned int rx_auth_rs_err;
+	unsigned int tx_auth_rq;
+	unsigned int no_auth_rs;
+	unsigned int no_ass_rs;
+	unsigned int tx_ass_rq;
+	unsigned int rx_ass_rq;
+	unsigned int tx_probe_rq;
+	unsigned int reassoc;
+	unsigned int swtxstop;
+	unsigned int swtxawake;
+	unsigned char CurrentShowTxate;
+	unsigned char last_packet_rate;
+	unsigned int txretrycount;
+};
+
+#define BEACON_PROBE_SSID_ID_POSITION 12
+
+struct ieee80211_info_element_hdr {
+	u8 id;
+	u8 len;
+} __attribute__ ((packed));
+
+/*
+ * These are the data types that can make up management packets
+ *
+	u16 auth_algorithm;
+	u16 auth_sequence;
+	u16 beacon_interval;
+	u16 capability;
+	u8 current_ap[ETH_ALEN];
+	u16 listen_interval;
+	struct {
+		u16 association_id:14, reserved:2;
+	} __attribute__ ((packed));
+	u32 time_stamp[2];
+	u16 reason;
+	u16 status;
+*/
+
+#define IEEE80211_DEFAULT_TX_ESSID "Penguin"
+#define IEEE80211_DEFAULT_BASIC_RATE 2 //1Mbps
+
+enum {WMM_all_frame, WMM_two_frame, WMM_four_frame, WMM_six_frame};
+#define MAX_SP_Len  (WMM_all_frame << 4)
+#define IEEE80211_QOS_TID 0x0f
+#define QOS_CTL_NOTCONTAIN_ACK (0x01 << 5)
+
+#define IEEE80211_DTIM_MBCAST 4
+#define IEEE80211_DTIM_UCAST 2
+#define IEEE80211_DTIM_VALID 1
+#define IEEE80211_DTIM_INVALID 0
+
+#define IEEE80211_PS_DISABLED 0
+#define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST
+#define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST
+
+//added by David for QoS 2006/6/30
+//#define WMM_Hang_8187
+#ifdef WMM_Hang_8187
+#undef WMM_Hang_8187
+#endif
+
+#define WME_AC_BK   0x00
+#define WME_AC_BE   0x01
+#define WME_AC_VI   0x02
+#define WME_AC_VO   0x03
+#define WME_ACI_MASK 0x03
+#define WME_AIFSN_MASK 0x03
+#define WME_AC_PRAM_LEN 16
+
+#define MAX_RECEIVE_BUFFER_SIZE 9100
+
+//UP Mapping to AC, using in MgntQuery_SequenceNumber() and maybe for DSCP
+//#define UP2AC(up)	((up<3) ? ((up==0)?1:0) : (up>>1))
+#if 1
+#define UP2AC(up) (		   \
+	((up) < 1) ? WME_AC_BE : \
+	((up) < 3) ? WME_AC_BK : \
+	((up) < 4) ? WME_AC_BE : \
+	((up) < 6) ? WME_AC_VI : \
+	WME_AC_VO)
+#endif
+//AC Mapping to UP, using in Tx part for selecting the corresponding TX queue
+#define AC2UP(_ac)	(       \
+	((_ac) == WME_AC_VO) ? 6 : \
+	((_ac) == WME_AC_VI) ? 5 : \
+	((_ac) == WME_AC_BK) ? 1 : \
+	0)
+
+#define	ETHER_ADDR_LEN		6	/* length of an Ethernet address */
+#define ETHERNET_HEADER_SIZE    14      /* length of two Ethernet address plus ether type*/
+
+struct	ether_header {
+	u8 ether_dhost[ETHER_ADDR_LEN];
+	u8 ether_shost[ETHER_ADDR_LEN];
+	u16 ether_type;
+} __attribute__((packed));
+
+#ifndef ETHERTYPE_PAE
+#define	ETHERTYPE_PAE	0x888e		/* EAPOL PAE/802.1x */
+#endif
+#ifndef ETHERTYPE_IP
+#define	ETHERTYPE_IP	0x0800		/* IP protocol */
+#endif
+
+typedef struct _bss_ht{
+
+	bool				support_ht;
+
+	// HT related elements
+	u8					ht_cap_buf[32];
+	u16					ht_cap_len;
+	u8					ht_info_buf[32];
+	u16					ht_info_len;
+
+	HT_SPEC_VER			ht_spec_ver;
+	//HT_CAPABILITY_ELE			bdHTCapEle;
+	//HT_INFORMATION_ELE		bdHTInfoEle;
+
+	bool				aggregation;
+	bool				long_slot_time;
+}bss_ht, *pbss_ht;
+
+typedef enum _erp_t{
+	ERP_NonERPpresent	= 0x01,
+	ERP_UseProtection	= 0x02,
+	ERP_BarkerPreambleMode = 0x04,
+} erp_t;
+
+
+struct ieee80211_network {
+	/* These entries are used to identify a unique network */
+	u8 bssid[ETH_ALEN];
+	u8 channel;
+	/* Ensure null-terminated for any debug msgs */
+	u8 ssid[IW_ESSID_MAX_SIZE + 1];
+	u8 ssid_len;
+#if 1
+        struct ieee80211_qos_data qos_data;
+#else
+       // Qos related. Added by Annie, 2005-11-01.
+        BSS_QOS   BssQos;
+#endif
+
+	//added by amy for LEAP
+	bool	bWithAironetIE;
+	bool	bCkipSupported;
+	bool	bCcxRmEnable;
+	u16 	CcxRmState[2];
+	// CCXv4 S59, MBSSID.
+	bool	bMBssidValid;
+	u8	MBssidMask;
+	u8	MBssid[6];
+	// CCX 2 S38, WLAN Device Version Number element. Annie, 2006-08-20.
+	bool	bWithCcxVerNum;
+	u8	BssCcxVerNumber;
+	/* These are network statistics */
+	struct ieee80211_rx_stats stats;
+	u16 capability;
+	u8  rates[MAX_RATES_LENGTH];
+	u8  rates_len;
+	u8  rates_ex[MAX_RATES_EX_LENGTH];
+	u8  rates_ex_len;
+	unsigned long last_scanned;
+	u8  mode;
+	u32 flags;
+	u32 last_associate;
+	u32 time_stamp[2];
+	u16 beacon_interval;
+	u16 listen_interval;
+	u16 atim_window;
+	u8  erp_value;
+	u8  wpa_ie[MAX_WPA_IE_LEN];
+	size_t wpa_ie_len;
+	u8  rsn_ie[MAX_WPA_IE_LEN];
+	size_t rsn_ie_len;
+
+        struct ieee80211_tim_parameters tim;
+	u8  dtim_period;
+	u8  dtim_data;
+	u32 last_dtim_sta_time[2];
+
+        //appeded for QoS
+        u8 wmm_info;
+        struct ieee80211_wmm_ac_param wmm_param[4];
+        u8 QoS_Enable;
+#ifdef THOMAS_TURBO
+	u8 Turbo_Enable;//enable turbo mode, added by thomas
+#endif
+#ifdef ENABLE_DOT11D
+	u16 CountryIeLen;
+	u8 CountryIeBuf[MAX_IE_LEN];
+#endif
+        // HT Related, by amy, 2008.04.29
+	BSS_HT	bssht;
+	// Add to handle broadcom AP management frame CCK rate.
+	bool broadcom_cap_exist;
+	bool realtek_cap_exit;
+	bool marvell_cap_exist;
+	bool ralink_cap_exist;
+	bool atheros_cap_exist;
+	bool cisco_cap_exist;
+	bool unknown_cap_exist;
+//	u8	berp_info;
+	bool	berp_info_valid;
+	bool buseprotection;
+	//put at the end of the structure.
+	struct list_head list;
+};
+
+#if 1
+enum ieee80211_state {
+
+	/* the card is not linked at all */
+	IEEE80211_NOLINK = 0,
+
+	/* IEEE80211_ASSOCIATING* are for BSS client mode
+	 * the driver shall not perform RX filtering unless
+	 * the state is LINKED.
+	 * The driver shall just check for the state LINKED and
+	 * defaults to NOLINK for ALL the other states (including
+	 * LINKED_SCANNING)
+	 */
+
+	/* the association procedure will start (wq scheduling)*/
+	IEEE80211_ASSOCIATING,
+	IEEE80211_ASSOCIATING_RETRY,
+
+	/* the association procedure is sending AUTH request*/
+	IEEE80211_ASSOCIATING_AUTHENTICATING,
+
+	/* the association procedure has successfully authentcated
+	 * and is sending association request
+	 */
+	IEEE80211_ASSOCIATING_AUTHENTICATED,
+
+	/* the link is ok. the card associated to a BSS or linked
+	 * to a ibss cell or acting as an AP and creating the bss
+	 */
+	IEEE80211_LINKED,
+
+	/* same as LINKED, but the driver shall apply RX filter
+	 * rules as we are in NO_LINK mode. As the card is still
+	 * logically linked, but it is doing a syncro site survey
+	 * then it will be back to LINKED state.
+	 */
+	IEEE80211_LINKED_SCANNING,
+
+};
+#else
+enum ieee80211_state {
+        IEEE80211_UNINITIALIZED = 0,
+        IEEE80211_INITIALIZED,
+        IEEE80211_ASSOCIATING,
+        IEEE80211_ASSOCIATED,
+        IEEE80211_AUTHENTICATING,
+        IEEE80211_AUTHENTICATED,
+        IEEE80211_SHUTDOWN
+};
+#endif
+
+#define DEFAULT_MAX_SCAN_AGE (15 * HZ)
+#define DEFAULT_FTS 2346
+
+#define CFG_IEEE80211_RESERVE_FCS (1<<0)
+#define CFG_IEEE80211_COMPUTE_FCS (1<<1)
+#define CFG_IEEE80211_RTS (1<<2)
+
+#define IEEE80211_24GHZ_MIN_CHANNEL 1
+#define IEEE80211_24GHZ_MAX_CHANNEL 14
+#define IEEE80211_24GHZ_CHANNELS (IEEE80211_24GHZ_MAX_CHANNEL - \
+                                  IEEE80211_24GHZ_MIN_CHANNEL + 1)
+
+#define IEEE80211_52GHZ_MIN_CHANNEL 34
+#define IEEE80211_52GHZ_MAX_CHANNEL 165
+#define IEEE80211_52GHZ_CHANNELS (IEEE80211_52GHZ_MAX_CHANNEL - \
+                                  IEEE80211_52GHZ_MIN_CHANNEL + 1)
+
+#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,11))
+extern inline int is_multicast_ether_addr(const u8 *addr)
+{
+        return ((addr[0] != 0xff) && (0x01 & addr[0]));
+}
+#endif
+
+#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,13))
+extern inline int is_broadcast_ether_addr(const u8 *addr)
+{
+	return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) &&   \
+		(addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
+}
+#endif
+
+typedef struct tx_pending_t{
+	int frag;
+	struct ieee80211_txb *txb;
+}tx_pending_t;
+
+typedef struct _bandwidth_autoswitch
+{
+	long threshold_20Mhzto40Mhz;
+	long	threshold_40Mhzto20Mhz;
+	bool bforced_tx20Mhz;
+	bool bautoswitch_enable;
+}bandwidth_autoswitch,*pbandwidth_autoswitch;
+
+
+//added by amy for order
+
+#define REORDER_WIN_SIZE	128
+#define REORDER_ENTRY_NUM	128
+typedef struct _RX_REORDER_ENTRY
+{
+	struct list_head	List;
+	u16			SeqNum;
+	struct ieee80211_rxb* prxb;
+} RX_REORDER_ENTRY, *PRX_REORDER_ENTRY;
+//added by amy for order
+typedef enum _Fsync_State{
+	Default_Fsync,
+	HW_Fsync,
+	SW_Fsync
+}Fsync_State;
+
+// Power save mode configured.
+typedef	enum _RT_PS_MODE
+{
+	eActive,	// Active/Continuous access.
+	eMaxPs,		// Max power save mode.
+	eFastPs		// Fast power save mode.
+}RT_PS_MODE;
+
+typedef enum _IPS_CALLBACK_FUNCION
+{
+	IPS_CALLBACK_NONE = 0,
+	IPS_CALLBACK_MGNT_LINK_REQUEST = 1,
+	IPS_CALLBACK_JOIN_REQUEST = 2,
+}IPS_CALLBACK_FUNCION;
+
+typedef enum _RT_JOIN_ACTION{
+	RT_JOIN_INFRA   = 1,
+	RT_JOIN_IBSS  = 2,
+	RT_START_IBSS = 3,
+	RT_NO_ACTION  = 4,
+}RT_JOIN_ACTION;
+
+typedef struct _IbssParms{
+	u16   atimWin;
+}IbssParms, *PIbssParms;
+#define MAX_NUM_RATES	264 // Max num of support rates element: 8,  Max num of ext. support rate: 255. 061122, by rcnjko.
+
+// RF state.
+typedef	enum _RT_RF_POWER_STATE
+{
+	eRfOn,
+	eRfSleep,
+	eRfOff
+}RT_RF_POWER_STATE;
+
+typedef struct _RT_POWER_SAVE_CONTROL
+{
+
+	//
+	// Inactive Power Save(IPS) : Disable RF when disconnected
+	//
+	bool				bInactivePs;
+	bool				bIPSModeBackup;
+	bool				bHaltAdapterClkRQ;
+	bool				bSwRfProcessing;
+	RT_RF_POWER_STATE	eInactivePowerState;
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	struct work_struct 	InactivePsWorkItem;
+#else
+	struct tq_struct	InactivePsWorkItem;
+#endif
+	struct timer_list	InactivePsTimer;
+
+	// Return point for join action
+	IPS_CALLBACK_FUNCION	ReturnPoint;
+
+	// Recored Parameters for rescheduled JoinRequest
+	bool				bTmpBssDesc;
+	RT_JOIN_ACTION		tmpJoinAction;
+	struct ieee80211_network tmpBssDesc;
+
+	// Recored Parameters for rescheduled MgntLinkRequest
+	bool				bTmpScanOnly;
+	bool				bTmpActiveScan;
+	bool				bTmpFilterHiddenAP;
+	bool				bTmpUpdateParms;
+	u8					tmpSsidBuf[33];
+	OCTET_STRING			tmpSsid2Scan;
+	bool				bTmpSsid2Scan;
+	u8					tmpNetworkType;
+	u8					tmpChannelNumber;
+	u16					tmpBcnPeriod;
+	u8					tmpDtimPeriod;
+	u16					tmpmCap;
+	OCTET_STRING			tmpSuppRateSet;
+	u8					tmpSuppRateBuf[MAX_NUM_RATES];
+	bool				bTmpSuppRate;
+	IbssParms				tmpIbpm;
+	bool				bTmpIbpm;
+
+	//
+	// Leisre Poswer Save : Disable RF if connected but traffic is not busy
+	//
+	bool				bLeisurePs;
+	u32				PowerProfile;
+	u8				LpsIdleCount;
+	u8				RegMaxLPSAwakeIntvl;
+	u8				LPSAwakeIntvl;
+
+	//RF OFF Level
+	u32				CurPsLevel;
+	u32				RegRfPsLevel;
+
+	//Fw Control LPS
+	bool				bFwCtrlLPS;
+	u8				FWCtrlPSMode;
+
+	//2009.01.01 added by tynli
+	// Record if there is a link request in IPS RF off progress.
+	bool				LinkReqInIPSRFOffPgs;
+	// To make sure that connect info should be executed, so we set the bit to filter the link info which comes after the connect info.
+	bool				BufConnectinfoBefore;
+
+}RT_POWER_SAVE_CONTROL,*PRT_POWER_SAVE_CONTROL;
+
+typedef u32 RT_RF_CHANGE_SOURCE;
+#define RF_CHANGE_BY_SW BIT31
+#define RF_CHANGE_BY_HW BIT30
+#define RF_CHANGE_BY_PS BIT29
+#define RF_CHANGE_BY_IPS BIT28
+#define RF_CHANGE_BY_INIT	0	// Do not change the RFOff reason. Defined by Bruce, 2008-01-17.
+
+#ifdef ENABLE_DOT11D
+typedef enum
+{
+	COUNTRY_CODE_FCC = 0,
+	COUNTRY_CODE_IC = 1,
+	COUNTRY_CODE_ETSI = 2,
+	COUNTRY_CODE_SPAIN = 3,
+	COUNTRY_CODE_FRANCE = 4,
+	COUNTRY_CODE_MKK = 5,
+	COUNTRY_CODE_MKK1 = 6,
+	COUNTRY_CODE_ISRAEL = 7,
+	COUNTRY_CODE_TELEC,
+	COUNTRY_CODE_MIC,
+	COUNTRY_CODE_GLOBAL_DOMAIN
+}country_code_type_t;
+#endif
+	// Firmware realted CMD IO.
+typedef	enum _FW_CMD_IO_TYPE{
+	FW_CMD_DIG_ENABLE = 0, // For DIG DM
+	FW_CMD_DIG_DISABLE = 1,
+	FW_CMD_DIG_HALT = 2,
+	FW_CMD_DIG_RESUME = 3,
+	FW_CMD_HIGH_PWR_ENABLE = 4, // For High Power DM
+	FW_CMD_HIGH_PWR_DISABLE = 5,
+	FW_CMD_RA_RESET = 6, // For Rate adaptive DM
+	FW_CMD_RA_ACTIVE= 7,
+	FW_CMD_RA_REFRESH_N= 8,
+	FW_CMD_RA_REFRESH_BG= 9,
+	FW_CMD_IQK_ENABLE = 10, // For FW supported IQK
+	FW_CMD_TXPWR_TRACK_ENABLE = 11,	// Tx power tracking switch
+	FW_CMD_TXPWR_TRACK_DISABLE = 12,	// Tx power tracking switch
+	FW_CMD_PAUSE_DM_BY_SCAN = 13,
+	FW_CMD_RESUME_DM_BY_SCAN = 14,
+	FW_CMD_MID_HIGH_PWR_ENABLE = 15,
+	FW_CMD_LPS_ENTER = 16,			// Indifate firmware that driver enters LPS, For PS-Poll hardware bug
+	FW_CMD_LPS_LEAVE = 17,			// Indicate firmware that driver leave LPS, 2009/1/4, by Emily
+}FW_CMD_IO_TYPE,*PFW_CMD_IO_TYPE;
+#define RT_MAX_LD_SLOT_NUM	10
+typedef struct _RT_LINK_DETECT_T{
+
+	u32				NumRecvBcnInPeriod;
+	u32				NumRecvDataInPeriod;
+
+	u32				RxBcnNum[RT_MAX_LD_SLOT_NUM];	// number of Rx beacon / CheckForHang_period  to determine link status
+	u32				RxDataNum[RT_MAX_LD_SLOT_NUM];	// number of Rx data / CheckForHang_period  to determine link status
+	u16				SlotNum;	// number of CheckForHang period to determine link status
+	u16				SlotIndex;
+
+	u32				NumTxOkInPeriod;
+	u32				NumRxOkInPeriod;
+	bool				bBusyTraffic;
+}RT_LINK_DETECT_T, *PRT_LINK_DETECT_T;
+
+
+struct ieee80211_device {
+	struct net_device *dev;
+        struct ieee80211_security sec;
+
+	//hw security related
+//	u8 hwsec_support; //support?
+	u8 hwsec_active;  //hw security active.
+	bool is_silent_reset;
+	bool is_roaming;
+	bool ieee_up;
+	//added by amy
+	bool bSupportRemoteWakeUp;
+	RT_PS_MODE	dot11PowerSaveMode; // Power save mode configured.
+	bool actscanning;
+	//added by amy 090313
+	bool be_scan_inprogress;
+	bool beinretry;
+	RT_RF_POWER_STATE		eRFPowerState;
+	RT_RF_CHANGE_SOURCE	RfOffReason;
+	bool is_set_key;
+	//11n spec related I wonder if These info structure need to be moved out of ieee80211_device
+
+	//11n HT below
+	PRT_HIGH_THROUGHPUT	pHTInfo;
+	//struct timer_list		SwBwTimer;
+//	spinlock_t chnlop_spinlock;
+	spinlock_t bw_spinlock;
+
+	spinlock_t reorder_spinlock;
+	// for HT operation rate set.  we use this one for HT data rate to seperate different descriptors
+	//the way fill this is the same as in the IE
+	u8	Regdot11HTOperationalRateSet[16];		//use RATR format
+	u8	dot11HTOperationalRateSet[16];		//use RATR format
+	u8	RegHTSuppRateSet[16];
+	u8				HTCurrentOperaRate;
+	u8				HTHighestOperaRate;
+	//wb added for rate operation mode to firmware
+	u8	bTxDisableRateFallBack;
+	u8 	bTxUseDriverAssingedRate;
+	atomic_t	atm_chnlop;
+	atomic_t	atm_swbw;
+//	u8	HTHighestOperaRate;
+//	u8 	HTCurrentOperaRate;
+
+	// 802.11e and WMM Traffic Stream Info (TX)
+	struct list_head		Tx_TS_Admit_List;
+	struct list_head		Tx_TS_Pending_List;
+	struct list_head		Tx_TS_Unused_List;
+	TX_TS_RECORD		TxTsRecord[TOTAL_TS_NUM];
+	// 802.11e and WMM Traffic Stream Info (RX)
+	struct list_head		Rx_TS_Admit_List;
+	struct list_head		Rx_TS_Pending_List;
+	struct list_head		Rx_TS_Unused_List;
+	RX_TS_RECORD		RxTsRecord[TOTAL_TS_NUM];
+//#ifdef TO_DO_LIST
+	RX_REORDER_ENTRY	RxReorderEntry[128];
+	struct list_head		RxReorder_Unused_List;
+//#endif
+	// Qos related. Added by Annie, 2005-11-01.
+//	PSTA_QOS			pStaQos;
+	u8				ForcedPriority;		// Force per-packet priority 1~7. (default: 0, not to force it.)
+
+
+	/* Bookkeeping structures */
+	struct net_device_stats stats;
+	struct ieee80211_stats ieee_stats;
+	struct ieee80211_softmac_stats softmac_stats;
+
+	/* Probe / Beacon management */
+	struct list_head network_free_list;
+	struct list_head network_list;
+	struct ieee80211_network *networks;
+	int scans;
+	int scan_age;
+
+	int iw_mode; /* operating mode (IW_MODE_*) */
+	struct iw_spy_data spy_data;
+
+	spinlock_t lock;
+	spinlock_t wpax_suitlist_lock;
+
+	int tx_headroom; /* Set to size of any additional room needed at front
+			  * of allocated Tx SKBs */
+	u32 config;
+
+	/* WEP and other encryption related settings at the device level */
+	int open_wep; /* Set to 1 to allow unencrypted frames */
+	int auth_mode;
+	int reset_on_keychange; /* Set to 1 if the HW needs to be reset on
+				 * WEP key changes */
+
+	/* If the host performs {en,de}cryption, then set to 1 */
+	int host_encrypt;
+	int host_encrypt_msdu;
+	int host_decrypt;
+        /* host performs multicast decryption */
+        int host_mc_decrypt;
+
+        /* host should strip IV and ICV from protected frames */
+        /* meaningful only when hardware decryption is being used */
+        int host_strip_iv_icv;
+
+        int host_open_frag;
+        int host_build_iv;
+	int ieee802_1x; /* is IEEE 802.1X used */
+
+	/* WPA data */
+	bool bHalfWirelessN24GMode;
+	int wpa_enabled;
+	int drop_unencrypted;
+	int tkip_countermeasures;
+	int privacy_invoked;
+	size_t wpa_ie_len;
+	u8 *wpa_ie;
+	u8 ap_mac_addr[6];
+	u16 pairwise_key_type;
+	u16 group_key_type;
+	struct list_head crypt_deinit_list;
+	struct ieee80211_crypt_data *crypt[WEP_KEYS];
+	int tx_keyidx; /* default TX key index (crypt[tx_keyidx]) */
+	struct timer_list crypt_deinit_timer;
+        int crypt_quiesced;
+
+	int bcrx_sta_key; /* use individual keys to override default keys even
+			   * with RX of broad/multicast frames */
+
+	/* Fragmentation structures */
+	// each streaming contain a entry
+	struct ieee80211_frag_entry frag_cache[17][IEEE80211_FRAG_CACHE_LEN];
+	unsigned int frag_next_idx[17];
+	u16 fts; /* Fragmentation Threshold */
+#define DEFAULT_RTS_THRESHOLD 2346U
+#define MIN_RTS_THRESHOLD 1
+#define MAX_RTS_THRESHOLD 2346U
+        u16 rts; /* RTS threshold */
+
+        /* Association info */
+        u8 bssid[ETH_ALEN];
+
+	/* This stores infos for the current network.
+	 * Either the network we are associated in INFRASTRUCTURE
+	 * or the network that we are creating in MASTER mode.
+	 * ad-hoc is a mixture ;-).
+	 * Note that in infrastructure mode, even when not associated,
+	 * fields bssid and essid may be valid (if wpa_set and essid_set
+	 * are true) as thy carry the value set by the user via iwconfig
+	 */
+	struct ieee80211_network current_network;
+
+	enum ieee80211_state state;
+
+	int short_slot;
+	int reg_mode;
+	int mode;       /* A, B, G */
+	int modulation; /* CCK, OFDM */
+	int freq_band;  /* 2.4Ghz, 5.2Ghz, Mixed */
+	int abg_true;   /* ABG flag              */
+
+	/* used for forcing the ibss workqueue to terminate
+	 * without wait for the syncro scan to terminate
+	 */
+	short sync_scan_hurryup;
+	u16 scan_watch_dog;
+        int perfect_rssi;
+        int worst_rssi;
+
+        u16 prev_seq_ctl;       /* used to drop duplicate frames */
+
+	/* map of allowed channels. 0 is dummy */
+	// FIXME: remeber to default to a basic channel plan depending of the PHY type
+#ifdef ENABLE_DOT11D
+	void* pDot11dInfo;
+	bool bGlobalDomain;
+#else
+	int channel_map[MAX_CHANNEL_NUMBER+1];
+#endif
+	int rate;       /* current rate */
+	int basic_rate;
+	//FIXME: pleace callback, see if redundant with softmac_features
+	short active_scan;
+
+	/* this contains flags for selectively enable softmac support */
+	u16 softmac_features;
+
+	/* if the sequence control field is not filled by HW */
+	u16 seq_ctrl[5];
+
+	/* association procedure transaction sequence number */
+	u16 associate_seq;
+
+	/* AID for RTXed association responses */
+	u16 assoc_id;
+
+	/* power save mode related*/
+	u8 ack_tx_to_ieee;
+	short ps;
+	short sta_sleep;
+	int ps_timeout;
+	int ps_period;
+	struct tasklet_struct ps_task;
+	u32 ps_th;
+	u32 ps_tl;
+
+	short raw_tx;
+	/* used if IEEE_SOFTMAC_TX_QUEUE is set */
+	short queue_stop;
+	short scanning;
+	short proto_started;
+
+	struct semaphore wx_sem;
+	struct semaphore scan_sem;
+
+	spinlock_t mgmt_tx_lock;
+	spinlock_t beacon_lock;
+
+	short beacon_txing;
+
+	short wap_set;
+	short ssid_set;
+
+	u8  wpax_type_set;    //{added by David, 2006.9.28}
+	u32 wpax_type_notify; //{added by David, 2006.9.26}
+
+	/* QoS related flag */
+	char init_wmmparam_flag;
+	/* set on initialization */
+	u8  qos_support;
+
+	/* for discarding duplicated packets in IBSS */
+	struct list_head ibss_mac_hash[IEEE_IBSS_MAC_HASH_SIZE];
+
+	/* for discarding duplicated packets in BSS */
+	u16 last_rxseq_num[17]; /* rx seq previous per-tid */
+	u16 last_rxfrag_num[17];/* tx frag previous per-tid */
+	unsigned long last_packet_time[17];
+
+	/* for PS mode */
+	unsigned long last_rx_ps_time;
+
+	/* used if IEEE_SOFTMAC_SINGLE_QUEUE is set */
+	struct sk_buff *mgmt_queue_ring[MGMT_QUEUE_NUM];
+	int mgmt_queue_head;
+	int mgmt_queue_tail;
+//{ added for rtl819x
+#define IEEE80211_QUEUE_LIMIT 128
+	u8 AsocRetryCount;
+	unsigned int hw_header;
+	struct sk_buff_head skb_waitQ[MAX_QUEUE_SIZE];
+	struct sk_buff_head  skb_aggQ[MAX_QUEUE_SIZE];
+	struct sk_buff_head  skb_drv_aggQ[MAX_QUEUE_SIZE];
+	u32	sta_edca_param[4];
+	bool aggregation;
+	// Enable/Disable Rx immediate BA capability.
+	bool enable_rx_imm_BA;
+	bool bibsscoordinator;
+
+	//+by amy for DM ,080515
+	//Dynamic Tx power for near/far range enable/Disable  , by amy , 2008-05-15
+	bool	bdynamic_txpower_enable;
+
+	bool bCTSToSelfEnable;
+	u8 	CTSToSelfTH;
+
+	u32 	fsync_time_interval;
+	u32	fsync_rate_bitmap;
+	u8	fsync_rssi_threshold;
+	bool	bfsync_enable;
+
+	u8	fsync_multiple_timeinterval;		// FsyncMultipleTimeInterval * FsyncTimeInterval
+	u32	fsync_firstdiff_ratethreshold;		// low threshold
+	u32	fsync_seconddiff_ratethreshold;	 // decrease threshold
+	Fsync_State			fsync_state;
+	bool		bis_any_nonbepkts;
+	//20Mhz 40Mhz AutoSwitch Threshold
+	bandwidth_autoswitch bandwidth_auto_switch;
+	//for txpower tracking
+	bool FwRWRF;
+
+	//added by amy for AP roaming
+	RT_LINK_DETECT_T	LinkDetectInfo;
+        //added by amy for ps
+	RT_POWER_SAVE_CONTROL	PowerSaveControl;
+//}
+	/* used if IEEE_SOFTMAC_TX_QUEUE is set */
+	struct  tx_pending_t tx_pending;
+
+	/* used if IEEE_SOFTMAC_ASSOCIATE is set */
+	struct timer_list associate_timer;
+
+	/* used if IEEE_SOFTMAC_BEACONS is set */
+	struct timer_list beacon_timer;
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+        struct work_struct associate_complete_wq;
+        struct work_struct associate_procedure_wq;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+        struct delayed_work softmac_scan_wq;
+        struct delayed_work associate_retry_wq;
+	 struct delayed_work start_ibss_wq;
+	 struct delayed_work hw_wakeup_wq;
+	struct delayed_work hw_sleep_wq;
+	struct delayed_work link_change_wq;
+#else
+        struct work_struct softmac_scan_wq;
+        struct work_struct associate_retry_wq;
+	struct work_struct start_ibss_wq;
+	struct work_struct hw_wakeup_wq;
+	struct work_struct hw_sleep_wq;
+	struct work_struct link_change_wq;
+#endif
+        struct work_struct wx_sync_scan_wq;
+        struct workqueue_struct *wq;
+#else
+	/* used for periodly scan */
+	struct timer_list scan_timer;
+
+	struct tq_struct associate_complete_wq;
+	struct tq_struct associate_retry_wq;
+	struct tq_struct start_ibss_wq;
+	struct tq_struct associate_procedure_wq;
+	struct tq_struct softmac_scan_wq;
+	struct tq_struct wx_sync_scan_wq;
+	struct tq_struct hw_wakeup_wq;
+	struct tq_struct hw_sleep_wq;
+	struct tq_struct link_change_wq;
+
+#endif
+        // Qos related. Added by Annie, 2005-11-01.
+        //STA_QOS  StaQos;
+
+        //u32 STA_EDCA_PARAM[4];
+	//CHANNEL_ACCESS_SETTING ChannelAccessSetting;
+
+
+	/* Callback functions */
+	void (*set_security)(struct net_device *dev,
+			     struct ieee80211_security *sec);
+
+	/* Used to TX data frame by using txb structs.
+	 * this is not used if in the softmac_features
+	 * is set the flag IEEE_SOFTMAC_TX_QUEUE
+	 */
+	int (*hard_start_xmit)(struct ieee80211_txb *txb,
+			       struct net_device *dev);
+
+	int (*reset_port)(struct net_device *dev);
+        int (*is_queue_full) (struct net_device * dev, int pri);
+
+        int (*handle_management) (struct net_device * dev,
+                                  struct ieee80211_network * network, u16 type);
+        int (*is_qos_active) (struct net_device *dev, struct sk_buff *skb);
+
+	/* Softmac-generated frames (mamagement) are TXed via this
+	 * callback if the flag IEEE_SOFTMAC_SINGLE_QUEUE is
+	 * not set. As some cards may have different HW queues that
+	 * one might want to use for data and management frames
+	 * the option to have two callbacks might be useful.
+	 * This fucntion can't sleep.
+	 */
+	int (*softmac_hard_start_xmit)(struct sk_buff *skb,
+			       struct net_device *dev);
+
+	/* used instead of hard_start_xmit (not softmac_hard_start_xmit)
+	 * if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data
+	 * frames. I the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
+	 * then also management frames are sent via this callback.
+	 * This function can't sleep.
+	 */
+	void (*softmac_data_hard_start_xmit)(struct sk_buff *skb,
+			       struct net_device *dev,int rate);
+
+	/* stops the HW queue for DATA frames. Useful to avoid
+	 * waste time to TX data frame when we are reassociating
+	 * This function can sleep.
+	 */
+	void (*data_hard_stop)(struct net_device *dev);
+
+	/* OK this is complementar to data_poll_hard_stop */
+	void (*data_hard_resume)(struct net_device *dev);
+
+	/* ask to the driver to retune the radio .
+	 * This function can sleep. the driver should ensure
+	 * the radio has been swithced before return.
+	 */
+	void (*set_chan)(struct net_device *dev,short ch);
+
+	/* These are not used if the ieee stack takes care of
+	 * scanning (IEEE_SOFTMAC_SCAN feature set).
+	 * In this case only the set_chan is used.
+	 *
+	 * The syncro version is similar to the start_scan but
+	 * does not return until all channels has been scanned.
+	 * this is called in user context and should sleep,
+	 * it is called in a work_queue when swithcing to ad-hoc mode
+	 * or in behalf of iwlist scan when the card is associated
+	 * and root user ask for a scan.
+	 * the fucntion stop_scan should stop both the syncro and
+	 * background scanning and can sleep.
+	 * The fucntion start_scan should initiate the background
+	 * scanning and can't sleep.
+	 */
+	void (*scan_syncro)(struct net_device *dev);
+	void (*start_scan)(struct net_device *dev);
+	void (*stop_scan)(struct net_device *dev);
+
+	/* indicate the driver that the link state is changed
+	 * for example it may indicate the card is associated now.
+	 * Driver might be interested in this to apply RX filter
+	 * rules or simply light the LINK led
+	 */
+	void (*link_change)(struct net_device *dev);
+
+	/* these two function indicates to the HW when to start
+	 * and stop to send beacons. This is used when the
+	 * IEEE_SOFTMAC_BEACONS is not set. For now the
+	 * stop_send_bacons is NOT guaranteed to be called only
+	 * after start_send_beacons.
+	 */
+	void (*start_send_beacons) (struct net_device *dev);
+	void (*stop_send_beacons) (struct net_device *dev);
+
+	/* power save mode related */
+	void (*sta_wake_up) (struct net_device *dev);
+//	void (*ps_request_tx_ack) (struct net_device *dev);
+	void (*enter_sleep_state) (struct net_device *dev, u32 th, u32 tl);
+	short (*ps_is_queue_empty) (struct net_device *dev);
+#if 0
+	/* Typical STA methods */
+        int (*handle_auth) (struct net_device * dev,
+                            struct ieee80211_auth * auth);
+        int (*handle_deauth) (struct net_device * dev,
+                              struct ieee80211_deauth * auth);
+        int (*handle_action) (struct net_device * dev,
+                              struct ieee80211_action * action,
+                              struct ieee80211_rx_stats * stats);
+        int (*handle_disassoc) (struct net_device * dev,
+                                struct ieee80211_disassoc * assoc);
+#endif
+        int (*handle_beacon) (struct net_device * dev, struct ieee80211_beacon * beacon, struct ieee80211_network * network);
+#if 0
+        int (*handle_probe_response) (struct net_device * dev,
+                                      struct ieee80211_probe_response * resp,
+                                      struct ieee80211_network * network);
+        int (*handle_probe_request) (struct net_device * dev,
+                                     struct ieee80211_probe_request * req,
+                                     struct ieee80211_rx_stats * stats);
+#endif
+        int (*handle_assoc_response) (struct net_device * dev, struct ieee80211_assoc_response_frame * resp, struct ieee80211_network * network);
+
+#if 0
+        /* Typical AP methods */
+        int (*handle_assoc_request) (struct net_device * dev);
+        int (*handle_reassoc_request) (struct net_device * dev,
+                                       struct ieee80211_reassoc_request * req);
+#endif
+
+	/* check whether Tx hw resouce available */
+	short (*check_nic_enough_desc)(struct net_device *dev, int queue_index);
+	//added by wb for HT related
+//	void (*SwChnlByTimerHandler)(struct net_device *dev, int channel);
+	void (*SetBWModeHandler)(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset);
+//	void (*UpdateHalRATRTableHandler)(struct net_device* dev, u8* pMcsRate);
+	bool (*GetNmodeSupportBySecCfg)(struct net_device* dev);
+	void (*SetWirelessMode)(struct net_device* dev, u8 wireless_mode);
+	bool (*GetHalfNmodeSupportByAPsHandler)(struct net_device* dev);
+	bool (*is_ap_in_wep_tkip)(struct net_device* dev);
+	void (*InitialGainHandler)(struct net_device *dev, u8 Operation);
+	bool (*SetFwCmdHandler)(struct net_device *dev,	FW_CMD_IO_TYPE		FwCmdIO);
+	void (*LedControlHandler)(struct net_device * dev, LED_CTL_MODE LedAction);
+	/* This must be the last item so that it points to the data
+	 * allocated beyond this structure by alloc_ieee80211 */
+	u8 priv[0];
+};
+
+#define IEEE_A            (1<<0)
+#define IEEE_B            (1<<1)
+#define IEEE_G            (1<<2)
+#define IEEE_N_24G 		  (1<<4)
+#define	IEEE_N_5G		  (1<<5)
+#define IEEE_MODE_MASK    (IEEE_A|IEEE_B|IEEE_G)
+
+/* Generate a 802.11 header */
+
+/* Uses the channel change callback directly
+ * instead of [start/stop] scan callbacks
+ */
+#define IEEE_SOFTMAC_SCAN (1<<2)
+
+/* Perform authentication and association handshake */
+#define IEEE_SOFTMAC_ASSOCIATE (1<<3)
+
+/* Generate probe requests */
+#define IEEE_SOFTMAC_PROBERQ (1<<4)
+
+/* Generate respones to probe requests */
+#define IEEE_SOFTMAC_PROBERS (1<<5)
+
+/* The ieee802.11 stack will manages the netif queue
+ * wake/stop for the driver, taking care of 802.11
+ * fragmentation. See softmac.c for details. */
+#define IEEE_SOFTMAC_TX_QUEUE (1<<7)
+
+/* Uses only the softmac_data_hard_start_xmit
+ * even for TX management frames.
+ */
+#define IEEE_SOFTMAC_SINGLE_QUEUE (1<<8)
+
+/* Generate beacons.  The stack will enqueue beacons
+ * to the card
+ */
+#define IEEE_SOFTMAC_BEACONS (1<<6)
+
+static inline void *ieee80211_priv(struct net_device *dev)
+{
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	return ((struct ieee80211_device *)netdev_priv(dev))->priv;
+#else
+	return ((struct ieee80211_device *)dev->priv)->priv;
+#endif
+}
+
+extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
+{
+	/* Single white space is for Linksys APs */
+	if (essid_len == 1 && essid[0] == ' ')
+		return 1;
+
+	/* Otherwise, if the entire essid is 0, we assume it is hidden */
+	while (essid_len) {
+		essid_len--;
+		if (essid[essid_len] != '\0')
+			return 0;
+	}
+
+	return 1;
+}
+
+extern inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, int mode)
+{
+	/*
+	 * It is possible for both access points and our device to support
+	 * combinations of modes, so as long as there is one valid combination
+	 * of ap/device supported modes, then return success
+	 *
+	 */
+	if ((mode & IEEE_A) &&
+	    (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
+	    (ieee->freq_band & IEEE80211_52GHZ_BAND))
+		return 1;
+
+	if ((mode & IEEE_G) &&
+	    (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
+	    (ieee->freq_band & IEEE80211_24GHZ_BAND))
+		return 1;
+
+	if ((mode & IEEE_B) &&
+	    (ieee->modulation & IEEE80211_CCK_MODULATION) &&
+	    (ieee->freq_band & IEEE80211_24GHZ_BAND))
+		return 1;
+
+	return 0;
+}
+
+extern inline int ieee80211_get_hdrlen(u16 fc)
+{
+	int hdrlen = IEEE80211_3ADDR_LEN;
+
+	switch (WLAN_FC_GET_TYPE(fc)) {
+	case IEEE80211_FTYPE_DATA:
+		if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS))
+			hdrlen = IEEE80211_4ADDR_LEN; /* Addr4 */
+		if(IEEE80211_QOS_HAS_SEQ(fc))
+			hdrlen += 2; /* QOS ctrl*/
+		break;
+	case IEEE80211_FTYPE_CTL:
+		switch (WLAN_FC_GET_STYPE(fc)) {
+		case IEEE80211_STYPE_CTS:
+		case IEEE80211_STYPE_ACK:
+			hdrlen = IEEE80211_1ADDR_LEN;
+			break;
+		default:
+			hdrlen = IEEE80211_2ADDR_LEN;
+			break;
+		}
+		break;
+	}
+
+	return hdrlen;
+}
+
+static inline u8 *ieee80211_get_payload(struct ieee80211_hdr *hdr)
+{
+        switch (ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl))) {
+        case IEEE80211_1ADDR_LEN:
+                return ((struct ieee80211_hdr_1addr *)hdr)->payload;
+        case IEEE80211_2ADDR_LEN:
+                return ((struct ieee80211_hdr_2addr *)hdr)->payload;
+        case IEEE80211_3ADDR_LEN:
+                return ((struct ieee80211_hdr_3addr *)hdr)->payload;
+        case IEEE80211_4ADDR_LEN:
+                return ((struct ieee80211_hdr_4addr *)hdr)->payload;
+        }
+        return NULL;
+}
+
+static inline int ieee80211_is_ofdm_rate(u8 rate)
+{
+        switch (rate & ~IEEE80211_BASIC_RATE_MASK) {
+        case IEEE80211_OFDM_RATE_6MB:
+        case IEEE80211_OFDM_RATE_9MB:
+        case IEEE80211_OFDM_RATE_12MB:
+        case IEEE80211_OFDM_RATE_18MB:
+        case IEEE80211_OFDM_RATE_24MB:
+        case IEEE80211_OFDM_RATE_36MB:
+        case IEEE80211_OFDM_RATE_48MB:
+        case IEEE80211_OFDM_RATE_54MB:
+                return 1;
+        }
+        return 0;
+}
+
+static inline int ieee80211_is_cck_rate(u8 rate)
+{
+        switch (rate & ~IEEE80211_BASIC_RATE_MASK) {
+        case IEEE80211_CCK_RATE_1MB:
+        case IEEE80211_CCK_RATE_2MB:
+        case IEEE80211_CCK_RATE_5MB:
+        case IEEE80211_CCK_RATE_11MB:
+                return 1;
+        }
+        return 0;
+}
+
+
+/* ieee80211.c */
+extern void free_ieee80211(struct net_device *dev);
+extern struct net_device *alloc_ieee80211(int sizeof_priv);
+
+extern int ieee80211_set_encryption(struct ieee80211_device *ieee);
+
+/* ieee80211_tx.c */
+
+extern int ieee80211_encrypt_fragment(
+	struct ieee80211_device *ieee,
+	struct sk_buff *frag,
+	int hdr_len);
+
+extern int ieee80211_xmit(struct sk_buff *skb,
+			  struct net_device *dev);
+extern void ieee80211_txb_free(struct ieee80211_txb *);
+
+
+/* ieee80211_rx.c */
+extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
+			struct ieee80211_rx_stats *rx_stats);
+extern void ieee80211_rx_mgt(struct ieee80211_device *ieee,
+			     struct ieee80211_hdr_4addr *header,
+			     struct ieee80211_rx_stats *stats);
+
+/* ieee80211_wx.c */
+extern int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
+				 struct iw_request_info *info,
+				 union iwreq_data *wrqu, char *key);
+extern int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
+				   struct iw_request_info *info,
+				   union iwreq_data *wrqu, char *key);
+extern int ieee80211_wx_get_encode(struct ieee80211_device *ieee,
+				   struct iw_request_info *info,
+				   union iwreq_data *wrqu, char *key);
+#if WIRELESS_EXT >= 18
+extern int ieee80211_wx_get_encode_ext(struct ieee80211_device *ieee,
+                            struct iw_request_info *info,
+                            union iwreq_data* wrqu, char *extra);
+extern int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
+                            struct iw_request_info *info,
+                            union iwreq_data* wrqu, char *extra);
+extern int ieee80211_wx_set_auth(struct ieee80211_device *ieee,
+                               struct iw_request_info *info,
+                               struct iw_param *data, char *extra);
+extern int ieee80211_wx_set_mlme(struct ieee80211_device *ieee,
+                               struct iw_request_info *info,
+                               union iwreq_data *wrqu, char *extra);
+#endif
+extern int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len);
+
+/* ieee80211_softmac.c */
+extern short ieee80211_is_54g(struct ieee80211_network net);
+extern short ieee80211_is_shortslot(struct ieee80211_network net);
+extern int ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
+			struct ieee80211_rx_stats *rx_stats, u16 type,
+			u16 stype);
+extern void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee80211_network *net);
+
+void SendDisassociation(struct ieee80211_device *ieee, u8* asSta, u8 asRsn);
+extern void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device *ieee);
+
+extern void ieee80211_stop_send_beacons(struct ieee80211_device *ieee);
+extern void notify_wx_assoc_event(struct ieee80211_device *ieee);
+extern void ieee80211_softmac_check_all_nets(struct ieee80211_device *ieee);
+extern void ieee80211_start_bss(struct ieee80211_device *ieee);
+extern void ieee80211_start_master_bss(struct ieee80211_device *ieee);
+extern void ieee80211_start_ibss(struct ieee80211_device *ieee);
+extern void ieee80211_softmac_init(struct ieee80211_device *ieee);
+extern void ieee80211_softmac_free(struct ieee80211_device *ieee);
+extern void ieee80211_associate_abort(struct ieee80211_device *ieee);
+extern void ieee80211_disassociate(struct ieee80211_device *ieee);
+extern void ieee80211_stop_scan(struct ieee80211_device *ieee);
+extern void ieee80211_start_scan_syncro(struct ieee80211_device *ieee);
+extern void ieee80211_check_all_nets(struct ieee80211_device *ieee);
+extern void ieee80211_start_protocol(struct ieee80211_device *ieee);
+extern void ieee80211_stop_protocol(struct ieee80211_device *ieee);
+extern void ieee80211_softmac_start_protocol(struct ieee80211_device *ieee);
+extern void ieee80211_softmac_stop_protocol(struct ieee80211_device *ieee);
+extern void ieee80211_reset_queue(struct ieee80211_device *ieee);
+extern void ieee80211_wake_queue(struct ieee80211_device *ieee);
+extern void ieee80211_stop_queue(struct ieee80211_device *ieee);
+extern struct sk_buff *ieee80211_get_beacon(struct ieee80211_device *ieee);
+extern void ieee80211_start_send_beacons(struct ieee80211_device *ieee);
+extern void ieee80211_stop_send_beacons(struct ieee80211_device *ieee);
+extern int ieee80211_wpa_supplicant_ioctl(struct ieee80211_device *ieee, struct iw_point *p);
+extern void notify_wx_assoc_event(struct ieee80211_device *ieee);
+extern void ieee80211_ps_tx_ack(struct ieee80211_device *ieee, short success);
+
+extern void softmac_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee);
+
+/* ieee80211_crypt_ccmp&tkip&wep.c */
+extern void ieee80211_tkip_null(void);
+extern void ieee80211_wep_null(void);
+extern void ieee80211_ccmp_null(void);
+
+/* ieee80211_softmac_wx.c */
+
+extern int ieee80211_wx_get_wap(struct ieee80211_device *ieee,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu, char *ext);
+
+extern int ieee80211_wx_set_wap(struct ieee80211_device *ieee,
+			 struct iw_request_info *info,
+			 union iwreq_data *awrq,
+			 char *extra);
+
+extern int ieee80211_wx_get_essid(struct ieee80211_device *ieee, struct iw_request_info *a,union iwreq_data *wrqu,char *b);
+
+extern int ieee80211_wx_set_rate(struct ieee80211_device *ieee,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra);
+
+extern int ieee80211_wx_get_rate(struct ieee80211_device *ieee,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra);
+
+extern int ieee80211_wx_set_mode(struct ieee80211_device *ieee, struct iw_request_info *a,
+			     union iwreq_data *wrqu, char *b);
+
+extern int ieee80211_wx_set_scan(struct ieee80211_device *ieee, struct iw_request_info *a,
+			     union iwreq_data *wrqu, char *b);
+
+extern int ieee80211_wx_set_essid(struct ieee80211_device *ieee,
+			      struct iw_request_info *a,
+			      union iwreq_data *wrqu, char *extra);
+
+extern int ieee80211_wx_get_mode(struct ieee80211_device *ieee, struct iw_request_info *a,
+			     union iwreq_data *wrqu, char *b);
+
+extern int ieee80211_wx_set_freq(struct ieee80211_device *ieee, struct iw_request_info *a,
+			     union iwreq_data *wrqu, char *b);
+
+extern int ieee80211_wx_get_freq(struct ieee80211_device *ieee, struct iw_request_info *a,
+			     union iwreq_data *wrqu, char *b);
+
+//extern void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee);
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+extern void ieee80211_wx_sync_scan_wq(struct work_struct *work);
+#else
+ extern void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee);
+#endif
+
+
+extern int ieee80211_wx_set_rawtx(struct ieee80211_device *ieee,
+			       struct iw_request_info *info,
+			       union iwreq_data *wrqu, char *extra);
+
+extern int ieee80211_wx_get_name(struct ieee80211_device *ieee,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra);
+
+extern int ieee80211_wx_set_power(struct ieee80211_device *ieee,
+				 struct iw_request_info *info,
+				 union iwreq_data *wrqu, char *extra);
+
+extern int ieee80211_wx_get_power(struct ieee80211_device *ieee,
+				 struct iw_request_info *info,
+				 union iwreq_data *wrqu, char *extra);
+
+extern int ieee80211_wx_set_rts(struct ieee80211_device *ieee,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra);
+
+extern int ieee80211_wx_get_rts(struct ieee80211_device *ieee,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra);
+//HT
+#define MAX_RECEIVE_BUFFER_SIZE 9100  //
+extern void HTDebugHTCapability(u8* CapIE, u8* TitleString );
+extern void HTDebugHTInfo(u8*  InfoIE, u8* TitleString);
+
+void HTSetConnectBwMode(struct ieee80211_device* ieee, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET    Offset);
+extern void HTUpdateDefaultSetting(struct ieee80211_device* ieee);
+extern void HTConstructCapabilityElement(struct ieee80211_device* ieee, u8* posHTCap, u8* len, u8 isEncrypt);
+extern void HTConstructInfoElement(struct ieee80211_device* ieee, u8* posHTInfo, u8* len, u8 isEncrypt);
+extern void HTConstructRT2RTAggElement(struct ieee80211_device* ieee, u8* posRT2RTAgg, u8* len);
+extern void HTOnAssocRsp(struct ieee80211_device *ieee);
+extern void HTInitializeHTInfo(struct ieee80211_device* ieee);
+extern void HTInitializeBssDesc(PBSS_HT pBssHT);
+extern void HTResetSelfAndSavePeerSetting(struct ieee80211_device* ieee, struct ieee80211_network * pNetwork);
+extern void HTUpdateSelfAndPeerSetting(struct ieee80211_device* ieee,   struct ieee80211_network * pNetwork);
+extern u8 HTGetHighestMCSRate(struct ieee80211_device* ieee, u8* pMCSRateSet, u8* pMCSFilter);
+extern u8 MCS_FILTER_ALL[];
+extern u16 MCS_DATA_RATE[2][2][77] ;
+extern u8 HTCCheck(struct ieee80211_device* ieee, u8*   pFrame);
+//extern void HTSetConnectBwModeCallback(unsigned long data);
+extern void HTResetIOTSetting(PRT_HIGH_THROUGHPUT  pHTInfo);
+extern bool IsHTHalfNmodeAPs(struct ieee80211_device* ieee);
+extern u16 HTHalfMcsToDataRate(struct ieee80211_device* ieee,  u8      nMcsRate);
+extern u16 HTMcsToDataRate( struct ieee80211_device* ieee, u8 nMcsRate);
+extern u16  TxCountToDataRate( struct ieee80211_device* ieee, u8 nDataRate);
+//function in BAPROC.c
+extern int ieee80211_rx_ADDBAReq( struct ieee80211_device* ieee, struct sk_buff *skb);
+extern int ieee80211_rx_ADDBARsp( struct ieee80211_device* ieee, struct sk_buff *skb);
+extern int ieee80211_rx_DELBA(struct ieee80211_device* ieee,struct sk_buff *skb);
+extern void TsInitAddBA( struct ieee80211_device* ieee, PTX_TS_RECORD   pTS, u8 Policy, u8 bOverwritePending);
+extern void TsInitDelBA( struct ieee80211_device* ieee, PTS_COMMON_INFO pTsCommonInfo, TR_SELECT TxRxSelect);
+extern void BaSetupTimeOut(unsigned long data);
+extern void TxBaInactTimeout(unsigned long data);
+extern void RxBaInactTimeout(unsigned long data);
+extern void ResetBaEntry( PBA_RECORD pBA);
+//function in TS.c
+extern bool GetTs(
+        struct ieee80211_device*        ieee,
+        PTS_COMMON_INFO                 *ppTS,
+        u8*                             Addr,
+        u8                              TID,
+        TR_SELECT                       TxRxSelect,  //Rx:1, Tx:0
+        bool                            bAddNewTs
+        );
+extern void TSInitialize(struct ieee80211_device *ieee);
+extern  void TsStartAddBaProcess(struct ieee80211_device* ieee, PTX_TS_RECORD   pTxTS);
+extern void RemovePeerTS(struct ieee80211_device* ieee, u8* Addr);
+extern void RemoveAllTS(struct ieee80211_device* ieee);
+void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee);
+
+extern const long ieee80211_wlan_frequencies[];
+
+extern inline void ieee80211_increment_scans(struct ieee80211_device *ieee)
+{
+	ieee->scans++;
+}
+
+extern inline int ieee80211_get_scans(struct ieee80211_device *ieee)
+{
+	return ieee->scans;
+}
+
+static inline const char *escape_essid(const char *essid, u8 essid_len) {
+	static char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
+	const char *s = essid;
+	char *d = escaped;
+
+	if (ieee80211_is_empty_essid(essid, essid_len)) {
+		memcpy(escaped, "<hidden>", sizeof("<hidden>"));
+		return escaped;
+	}
+
+	essid_len = min(essid_len, (u8)IW_ESSID_MAX_SIZE);
+	while (essid_len--) {
+		if (*s == '\0') {
+			*d++ = '\\';
+			*d++ = '0';
+			s++;
+		} else {
+			*d++ = *s++;
+		}
+	}
+	*d = '\0';
+	return escaped;
+}
+
+/* For the function is more related to hardware setting, it's better to use the
+ * ieee handler to refer to it.
+ */
+extern short check_nic_enough_desc(struct net_device *dev, int queue_index);
+extern int ieee80211_data_xmit(struct sk_buff *skb, struct net_device *dev);
+extern int ieee80211_parse_info_param(struct ieee80211_device *ieee,
+		struct ieee80211_info_element *info_element,
+		u16 length,
+		struct ieee80211_network *network,
+		struct ieee80211_rx_stats *stats);
+
+void ieee80211_indicate_packets(struct ieee80211_device *ieee, struct ieee80211_rxb** prxbIndicateArray,u8  index);
+#define RT_ASOC_RETRY_LIMIT	5
+#endif /* IEEE80211_H */
diff --git a/drivers/staging/rtl8192su/ieee80211/EndianFree.h b/drivers/staging/rtl8192su/ieee80211/EndianFree.h
new file mode 100644
index 00000000000..0c417a6234a
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/EndianFree.h
@@ -0,0 +1,199 @@
+#ifndef __INC_ENDIANFREE_H
+#define __INC_ENDIANFREE_H
+
+/*
+ *	Call endian free function when
+ *		1. Read/write packet content.
+ *		2. Before write integer to IO.
+ *		3. After read integer from IO.
+ */
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20))
+#ifndef bool
+typedef enum{false = 0, true} bool;
+#endif
+#endif
+
+#define __MACHINE_LITTLE_ENDIAN 1234    /* LSB first: i386, vax */
+#define __MACHINE_BIG_ENDIAN    4321    /* MSB first: 68000, ibm, net, ppc */
+
+#define BYTE_ORDER __MACHINE_LITTLE_ENDIAN
+
+#if BYTE_ORDER == __MACHINE_LITTLE_ENDIAN
+// Convert data
+#define EF1Byte(_val)				((u8)(_val))
+#define EF2Byte(_val)				((u16)(_val))
+#define EF4Byte(_val)				((u32)(_val))
+
+#else
+// Convert data
+#define EF1Byte(_val)				((u8)(_val))
+#define EF2Byte(_val)				(((((u16)(_val))&0x00ff)<<8)|((((u16)(_val))&0xff00)>>8))
+#define EF4Byte(_val)				(((((u32)(_val))&0x000000ff)<<24)|\
+						((((u32)(_val))&0x0000ff00)<<8)|\
+						((((u32)(_val))&0x00ff0000)>>8)|\
+						((((u32)(_val))&0xff000000)>>24))
+#endif
+
+// Read data from memory
+#define ReadEF1Byte(_ptr)		EF1Byte(*((u8 *)(_ptr)))
+#define ReadEF2Byte(_ptr)		EF2Byte(*((u16 *)(_ptr)))
+#define ReadEF4Byte(_ptr)		EF4Byte(*((u32 *)(_ptr)))
+
+// Write data to memory
+#define WriteEF1Byte(_ptr, _val)	(*((u8 *)(_ptr)))=EF1Byte(_val)
+#define WriteEF2Byte(_ptr, _val)	(*((u16 *)(_ptr)))=EF2Byte(_val)
+#define WriteEF4Byte(_ptr, _val)	(*((u32 *)(_ptr)))=EF4Byte(_val)
+// Convert Host system specific byte ording (litten or big endia) to Network byte ording (big endian).
+// 2006.05.07, by rcnjko.
+#if BYTE_ORDER == __MACHINE_LITTLE_ENDIAN
+#define H2N1BYTE(_val)	((u8)(_val))
+#define H2N2BYTE(_val)	(((((u16)(_val))&0x00ff)<<8)|\
+			((((u16)(_val))&0xff00)>>8))
+#define H2N4BYTE(_val)	(((((u32)(_val))&0x000000ff)<<24)|\
+			((((u32)(_val))&0x0000ff00)<<8)	|\
+			((((u32)(_val))&0x00ff0000)>>8)	|\
+			((((u32)(_val))&0xff000000)>>24))
+#else
+#define H2N1BYTE(_val)			((u8)(_val))
+#define H2N2BYTE(_val)			((u16)(_val))
+#define H2N4BYTE(_val)			((u32)(_val))
+#endif
+
+// Convert from Network byte ording (big endian) to Host system specific byte ording (litten or big endia).
+// 2006.05.07, by rcnjko.
+#if BYTE_ORDER == __MACHINE_LITTLE_ENDIAN
+#define N2H1BYTE(_val)	((u8)(_val))
+#define N2H2BYTE(_val)	(((((u16)(_val))&0x00ff)<<8)|\
+			((((u16)(_val))&0xff00)>>8))
+#define N2H4BYTE(_val)	(((((u32)(_val))&0x000000ff)<<24)|\
+			((((u32)(_val))&0x0000ff00)<<8)	|\
+			((((u32)(_val))&0x00ff0000)>>8)	|\
+			((((u32)(_val))&0xff000000)>>24))
+#else
+#define N2H1BYTE(_val)			((u8)(_val))
+#define N2H2BYTE(_val)			((u16)(_val))
+#define N2H4BYTE(_val)			((u32)(_val))
+#endif
+
+//
+//	Example:
+//		BIT_LEN_MASK_32(0) => 0x00000000
+//		BIT_LEN_MASK_32(1) => 0x00000001
+//		BIT_LEN_MASK_32(2) => 0x00000003
+//		BIT_LEN_MASK_32(32) => 0xFFFFFFFF
+//
+#define BIT_LEN_MASK_32(__BitLen) (0xFFFFFFFF >> (32 - (__BitLen)))
+//
+//	Example:
+//		BIT_OFFSET_LEN_MASK_32(0, 2) => 0x00000003
+//		BIT_OFFSET_LEN_MASK_32(16, 2) => 0x00030000
+//
+#define BIT_OFFSET_LEN_MASK_32(__BitOffset, __BitLen) (BIT_LEN_MASK_32(__BitLen) << (__BitOffset))
+
+//
+//	Description:
+//		Return 4-byte value in host byte ordering from
+//		4-byte pointer in litten-endian system.
+//
+#define LE_P4BYTE_TO_HOST_4BYTE(__pStart) (EF4Byte(*((u32 *)(__pStart))))
+
+//
+//	Description:
+//		Translate subfield (continuous bits in little-endian) of 4-byte value in litten byte to
+//		4-byte value in host byte ordering.
+//
+#define LE_BITS_TO_4BYTE(__pStart, __BitOffset, __BitLen) \
+	( \
+	  ( LE_P4BYTE_TO_HOST_4BYTE(__pStart) >> (__BitOffset) ) \
+	  & \
+	  BIT_LEN_MASK_32(__BitLen) \
+	)
+
+//
+//	Description:
+//		Mask subfield (continuous bits in little-endian) of 4-byte value in litten byte oredering
+//		and return the result in 4-byte value in host byte ordering.
+//
+#define LE_BITS_CLEARED_TO_4BYTE(__pStart, __BitOffset, __BitLen) \
+	( \
+	  LE_P4BYTE_TO_HOST_4BYTE(__pStart) \
+	  & \
+	  ( ~BIT_OFFSET_LEN_MASK_32(__BitOffset, __BitLen) ) \
+	)
+
+//
+//	Description:
+//		Set subfield of little-endian 4-byte value to specified value.
+//
+#define SET_BITS_TO_LE_4BYTE(__pStart, __BitOffset, __BitLen, __Value) \
+	*((u32 *)(__pStart)) = \
+	EF4Byte( \
+	LE_BITS_CLEARED_TO_4BYTE(__pStart, __BitOffset, __BitLen) \
+	| \
+	( (((u32)__Value) & BIT_LEN_MASK_32(__BitLen)) << (__BitOffset) ) \
+       );
+
+
+#define BIT_LEN_MASK_16(__BitLen) \
+	(0xFFFF >> (16 - (__BitLen)))
+
+#define BIT_OFFSET_LEN_MASK_16(__BitOffset, __BitLen) \
+	(BIT_LEN_MASK_16(__BitLen) << (__BitOffset))
+
+#define LE_P2BYTE_TO_HOST_2BYTE(__pStart) \
+	(EF2Byte(*((u16 *)(__pStart))))
+
+#define LE_BITS_TO_2BYTE(__pStart, __BitOffset, __BitLen) \
+	( \
+	  ( LE_P2BYTE_TO_HOST_2BYTE(__pStart) >> (__BitOffset) ) \
+	  & \
+	  BIT_LEN_MASK_16(__BitLen) \
+	)
+
+#define LE_BITS_CLEARED_TO_2BYTE(__pStart, __BitOffset, __BitLen) \
+	( \
+	  LE_P2BYTE_TO_HOST_2BYTE(__pStart) \
+	  & \
+	  ( ~BIT_OFFSET_LEN_MASK_16(__BitOffset, __BitLen) ) \
+	)
+
+#define SET_BITS_TO_LE_2BYTE(__pStart, __BitOffset, __BitLen, __Value) \
+	*((u16 *)(__pStart)) = \
+	EF2Byte( \
+		LE_BITS_CLEARED_TO_2BYTE(__pStart, __BitOffset, __BitLen) \
+		| \
+		( (((u16)__Value) & BIT_LEN_MASK_16(__BitLen)) << (__BitOffset) ) \
+       );
+
+#define BIT_LEN_MASK_8(__BitLen) \
+	(0xFF >> (8 - (__BitLen)))
+
+#define BIT_OFFSET_LEN_MASK_8(__BitOffset, __BitLen) \
+	(BIT_LEN_MASK_8(__BitLen) << (__BitOffset))
+
+#define LE_P1BYTE_TO_HOST_1BYTE(__pStart) \
+	(EF1Byte(*((u8 *)(__pStart))))
+
+#define LE_BITS_TO_1BYTE(__pStart, __BitOffset, __BitLen) \
+	( \
+	  ( LE_P1BYTE_TO_HOST_1BYTE(__pStart) >> (__BitOffset) ) \
+	  & \
+	  BIT_LEN_MASK_8(__BitLen) \
+	)
+
+#define LE_BITS_CLEARED_TO_1BYTE(__pStart, __BitOffset, __BitLen) \
+	( \
+	  LE_P1BYTE_TO_HOST_1BYTE(__pStart) \
+	  & \
+	  ( ~BIT_OFFSET_LEN_MASK_8(__BitOffset, __BitLen) ) \
+	)
+
+#define SET_BITS_TO_LE_1BYTE(__pStart, __BitOffset, __BitLen, __Value) \
+	*((u8 *)(__pStart)) = \
+	EF1Byte( \
+		LE_BITS_CLEARED_TO_1BYTE(__pStart, __BitOffset, __BitLen) \
+		| \
+		( (((u8)__Value) & BIT_LEN_MASK_8(__BitLen)) << (__BitOffset) ) \
+       );
+
+#endif // #ifndef __INC_ENDIANFREE_H
diff --git a/drivers/staging/rtl8192su/ieee80211/Makefile b/drivers/staging/rtl8192su/ieee80211/Makefile
new file mode 100644
index 00000000000..295a18f3c9c
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/Makefile
@@ -0,0 +1,31 @@
+NIC_SELECT = RTL8192SU
+
+EXTRA_CFLAGS += -O2
+EXTRA_CFLAGS += -DRTL8192S_DISABLE_FW_DM=0
+EXTRA_CFLAGS += -DRTL8192SU
+#EXTRA_CFLAGS += -DJOHN_NOCPY
+EXTRA_CFLAGS += -DTHOMAS_TURBO
+#flags to enable or disble 80211D feature
+EXTRA_CFLAGS += -DENABLE_DOT11D
+ieee80211-rsl-objs := ieee80211_rx.o \
+		      ieee80211_softmac.o \
+		      ieee80211_tx.o \
+		      ieee80211_wx.o \
+		      ieee80211_module.o \
+		      ieee80211_softmac_wx.o\
+		      rtl819x_HTProc.o\
+		      rtl819x_TSProc.o\
+		      rtl819x_BAProc.o\
+		      dot11d.o
+
+ieee80211_crypt-rsl-objs := ieee80211_crypt.o
+ieee80211_crypt_tkip-rsl-objs := ieee80211_crypt_tkip.o
+ieee80211_crypt_ccmp-rsl-objs := ieee80211_crypt_ccmp.o
+ieee80211_crypt_wep-rsl-objs := ieee80211_crypt_wep.o
+
+obj-m +=ieee80211-rsl.o
+obj-m +=ieee80211_crypt-rsl.o
+obj-m +=ieee80211_crypt_wep-rsl.o
+obj-m +=ieee80211_crypt_tkip-rsl.o
+obj-m +=ieee80211_crypt_ccmp-rsl.o
+
diff --git a/drivers/staging/rtl8192su/ieee80211/aes.c b/drivers/staging/rtl8192su/ieee80211/aes.c
new file mode 100644
index 00000000000..0c176e29a79
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/aes.c
@@ -0,0 +1,469 @@
+/*
+ * Cryptographic API.
+ *
+ * AES Cipher Algorithm.
+ *
+ * Based on Brian Gladman's code.
+ *
+ * Linux developers:
+ *  Alexander Kjeldaas <astor@fast.no>
+ *  Herbert Valerio Riedel <hvr@hvrlab.org>
+ *  Kyle McMartin <kyle@debian.org>
+ *  Adam J. Richter <adam@yggdrasil.com> (conversion to 2.5 API).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * ---------------------------------------------------------------------------
+ * Copyright (c) 2002, Dr Brian Gladman <brg@gladman.me.uk>, Worcester, UK.
+ * All rights reserved.
+ *
+ * LICENSE TERMS
+ *
+ * The free distribution and use of this software in both source and binary
+ * form is allowed (with or without changes) provided that:
+ *
+ *   1. distributions of this source code include the above copyright
+ *      notice, this list of conditions and the following disclaimer;
+ *
+ *   2. distributions in binary form include the above copyright
+ *      notice, this list of conditions and the following disclaimer
+ *      in the documentation and/or other associated materials;
+ *
+ *   3. the copyright holder's name is not used to endorse products
+ *      built using this software without specific written permission.
+ *
+ * ALTERNATIVELY, provided that this notice is retained in full, this product
+ * may be distributed under the terms of the GNU General Public License (GPL),
+ * in which case the provisions of the GPL apply INSTEAD OF those given above.
+ *
+ * DISCLAIMER
+ *
+ * This software is provided 'as is' with no explicit or implied warranties
+ * in respect of its properties, including, but not limited to, correctness
+ * and/or fitness for purpose.
+ * ---------------------------------------------------------------------------
+ */
+
+/* Some changes from the Gladman version:
+    s/RIJNDAEL(e_key)/E_KEY/g
+    s/RIJNDAEL(d_key)/D_KEY/g
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+//#include <linux/crypto.h>
+#include "rtl_crypto.h"
+#include <asm/byteorder.h>
+
+#define AES_MIN_KEY_SIZE	16
+#define AES_MAX_KEY_SIZE	32
+
+#define AES_BLOCK_SIZE		16
+
+static inline
+u32 generic_rotr32 (const u32 x, const unsigned bits)
+{
+	const unsigned n = bits % 32;
+	return (x >> n) | (x << (32 - n));
+}
+
+static inline
+u32 generic_rotl32 (const u32 x, const unsigned bits)
+{
+	const unsigned n = bits % 32;
+	return (x << n) | (x >> (32 - n));
+}
+
+#define rotl generic_rotl32
+#define rotr generic_rotr32
+
+/*
+ * #define byte(x, nr) ((unsigned char)((x) >> (nr*8)))
+ */
+inline static u8
+byte(const u32 x, const unsigned n)
+{
+	return x >> (n << 3);
+}
+
+#define u32_in(x) le32_to_cpu(*(const u32 *)(x))
+#define u32_out(to, from) (*(u32 *)(to) = cpu_to_le32(from))
+
+struct aes_ctx {
+	int key_length;
+	u32 E[60];
+	u32 D[60];
+};
+
+#define E_KEY ctx->E
+#define D_KEY ctx->D
+
+static u8 pow_tab[256] __initdata;
+static u8 log_tab[256] __initdata;
+static u8 sbx_tab[256] __initdata;
+static u8 isb_tab[256] __initdata;
+static u32 rco_tab[10];
+static u32 ft_tab[4][256];
+static u32 it_tab[4][256];
+
+static u32 fl_tab[4][256];
+static u32 il_tab[4][256];
+
+static inline u8 __init
+f_mult (u8 a, u8 b)
+{
+	u8 aa = log_tab[a], cc = aa + log_tab[b];
+
+	return pow_tab[cc + (cc < aa ? 1 : 0)];
+}
+
+#define ff_mult(a,b)    (a && b ? f_mult(a, b) : 0)
+
+#define f_rn(bo, bi, n, k)					\
+    bo[n] =  ft_tab[0][byte(bi[n],0)] ^				\
+             ft_tab[1][byte(bi[(n + 1) & 3],1)] ^		\
+             ft_tab[2][byte(bi[(n + 2) & 3],2)] ^		\
+             ft_tab[3][byte(bi[(n + 3) & 3],3)] ^ *(k + n)
+
+#define i_rn(bo, bi, n, k)					\
+    bo[n] =  it_tab[0][byte(bi[n],0)] ^				\
+             it_tab[1][byte(bi[(n + 3) & 3],1)] ^		\
+             it_tab[2][byte(bi[(n + 2) & 3],2)] ^		\
+             it_tab[3][byte(bi[(n + 1) & 3],3)] ^ *(k + n)
+
+#define ls_box(x)				\
+    ( fl_tab[0][byte(x, 0)] ^			\
+      fl_tab[1][byte(x, 1)] ^			\
+      fl_tab[2][byte(x, 2)] ^			\
+      fl_tab[3][byte(x, 3)] )
+
+#define f_rl(bo, bi, n, k)					\
+    bo[n] =  fl_tab[0][byte(bi[n],0)] ^				\
+             fl_tab[1][byte(bi[(n + 1) & 3],1)] ^		\
+             fl_tab[2][byte(bi[(n + 2) & 3],2)] ^		\
+             fl_tab[3][byte(bi[(n + 3) & 3],3)] ^ *(k + n)
+
+#define i_rl(bo, bi, n, k)					\
+    bo[n] =  il_tab[0][byte(bi[n],0)] ^				\
+             il_tab[1][byte(bi[(n + 3) & 3],1)] ^		\
+             il_tab[2][byte(bi[(n + 2) & 3],2)] ^		\
+             il_tab[3][byte(bi[(n + 1) & 3],3)] ^ *(k + n)
+
+static void __init
+gen_tabs (void)
+{
+	u32 i, t;
+	u8 p, q;
+
+	/* log and power tables for GF(2**8) finite field with
+	   0x011b as modular polynomial - the simplest primitive
+	   root is 0x03, used here to generate the tables */
+
+	for (i = 0, p = 1; i < 256; ++i) {
+		pow_tab[i] = (u8) p;
+		log_tab[p] = (u8) i;
+
+		p ^= (p << 1) ^ (p & 0x80 ? 0x01b : 0);
+	}
+
+	log_tab[1] = 0;
+
+	for (i = 0, p = 1; i < 10; ++i) {
+		rco_tab[i] = p;
+
+		p = (p << 1) ^ (p & 0x80 ? 0x01b : 0);
+	}
+
+	for (i = 0; i < 256; ++i) {
+		p = (i ? pow_tab[255 - log_tab[i]] : 0);
+		q = ((p >> 7) | (p << 1)) ^ ((p >> 6) | (p << 2));
+		p ^= 0x63 ^ q ^ ((q >> 6) | (q << 2));
+		sbx_tab[i] = p;
+		isb_tab[p] = (u8) i;
+	}
+
+	for (i = 0; i < 256; ++i) {
+		p = sbx_tab[i];
+
+		t = p;
+		fl_tab[0][i] = t;
+		fl_tab[1][i] = rotl (t, 8);
+		fl_tab[2][i] = rotl (t, 16);
+		fl_tab[3][i] = rotl (t, 24);
+
+		t = ((u32) ff_mult (2, p)) |
+		    ((u32) p << 8) |
+		    ((u32) p << 16) | ((u32) ff_mult (3, p) << 24);
+
+		ft_tab[0][i] = t;
+		ft_tab[1][i] = rotl (t, 8);
+		ft_tab[2][i] = rotl (t, 16);
+		ft_tab[3][i] = rotl (t, 24);
+
+		p = isb_tab[i];
+
+		t = p;
+		il_tab[0][i] = t;
+		il_tab[1][i] = rotl (t, 8);
+		il_tab[2][i] = rotl (t, 16);
+		il_tab[3][i] = rotl (t, 24);
+
+		t = ((u32) ff_mult (14, p)) |
+		    ((u32) ff_mult (9, p) << 8) |
+		    ((u32) ff_mult (13, p) << 16) |
+		    ((u32) ff_mult (11, p) << 24);
+
+		it_tab[0][i] = t;
+		it_tab[1][i] = rotl (t, 8);
+		it_tab[2][i] = rotl (t, 16);
+		it_tab[3][i] = rotl (t, 24);
+	}
+}
+
+#define star_x(x) (((x) & 0x7f7f7f7f) << 1) ^ ((((x) & 0x80808080) >> 7) * 0x1b)
+
+#define imix_col(y,x)       \
+    u   = star_x(x);        \
+    v   = star_x(u);        \
+    w   = star_x(v);        \
+    t   = w ^ (x);          \
+   (y)  = u ^ v ^ w;        \
+   (y) ^= rotr(u ^ t,  8) ^ \
+          rotr(v ^ t, 16) ^ \
+          rotr(t,24)
+
+/* initialise the key schedule from the user supplied key */
+
+#define loop4(i)                                    \
+{   t = rotr(t,  8); t = ls_box(t) ^ rco_tab[i];    \
+    t ^= E_KEY[4 * i];     E_KEY[4 * i + 4] = t;    \
+    t ^= E_KEY[4 * i + 1]; E_KEY[4 * i + 5] = t;    \
+    t ^= E_KEY[4 * i + 2]; E_KEY[4 * i + 6] = t;    \
+    t ^= E_KEY[4 * i + 3]; E_KEY[4 * i + 7] = t;    \
+}
+
+#define loop6(i)                                    \
+{   t = rotr(t,  8); t = ls_box(t) ^ rco_tab[i];    \
+    t ^= E_KEY[6 * i];     E_KEY[6 * i + 6] = t;    \
+    t ^= E_KEY[6 * i + 1]; E_KEY[6 * i + 7] = t;    \
+    t ^= E_KEY[6 * i + 2]; E_KEY[6 * i + 8] = t;    \
+    t ^= E_KEY[6 * i + 3]; E_KEY[6 * i + 9] = t;    \
+    t ^= E_KEY[6 * i + 4]; E_KEY[6 * i + 10] = t;   \
+    t ^= E_KEY[6 * i + 5]; E_KEY[6 * i + 11] = t;   \
+}
+
+#define loop8(i)                                    \
+{   t = rotr(t,  8); ; t = ls_box(t) ^ rco_tab[i];  \
+    t ^= E_KEY[8 * i];     E_KEY[8 * i + 8] = t;    \
+    t ^= E_KEY[8 * i + 1]; E_KEY[8 * i + 9] = t;    \
+    t ^= E_KEY[8 * i + 2]; E_KEY[8 * i + 10] = t;   \
+    t ^= E_KEY[8 * i + 3]; E_KEY[8 * i + 11] = t;   \
+    t  = E_KEY[8 * i + 4] ^ ls_box(t);    \
+    E_KEY[8 * i + 12] = t;                \
+    t ^= E_KEY[8 * i + 5]; E_KEY[8 * i + 13] = t;   \
+    t ^= E_KEY[8 * i + 6]; E_KEY[8 * i + 14] = t;   \
+    t ^= E_KEY[8 * i + 7]; E_KEY[8 * i + 15] = t;   \
+}
+
+static int
+aes_set_key(void *ctx_arg, const u8 *in_key, unsigned int key_len, u32 *flags)
+{
+	struct aes_ctx *ctx = ctx_arg;
+	u32 i, t, u, v, w;
+
+	if (key_len != 16 && key_len != 24 && key_len != 32) {
+		*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+		return -EINVAL;
+	}
+
+	ctx->key_length = key_len;
+
+	E_KEY[0] = u32_in (in_key);
+	E_KEY[1] = u32_in (in_key + 4);
+	E_KEY[2] = u32_in (in_key + 8);
+	E_KEY[3] = u32_in (in_key + 12);
+
+	switch (key_len) {
+	case 16:
+		t = E_KEY[3];
+		for (i = 0; i < 10; ++i)
+			loop4 (i);
+		break;
+
+	case 24:
+		E_KEY[4] = u32_in (in_key + 16);
+		t = E_KEY[5] = u32_in (in_key + 20);
+		for (i = 0; i < 8; ++i)
+			loop6 (i);
+		break;
+
+	case 32:
+		E_KEY[4] = u32_in (in_key + 16);
+		E_KEY[5] = u32_in (in_key + 20);
+		E_KEY[6] = u32_in (in_key + 24);
+		t = E_KEY[7] = u32_in (in_key + 28);
+		for (i = 0; i < 7; ++i)
+			loop8 (i);
+		break;
+	}
+
+	D_KEY[0] = E_KEY[0];
+	D_KEY[1] = E_KEY[1];
+	D_KEY[2] = E_KEY[2];
+	D_KEY[3] = E_KEY[3];
+
+	for (i = 4; i < key_len + 24; ++i) {
+		imix_col (D_KEY[i], E_KEY[i]);
+	}
+
+	return 0;
+}
+
+/* encrypt a block of text */
+
+#define f_nround(bo, bi, k) \
+    f_rn(bo, bi, 0, k);     \
+    f_rn(bo, bi, 1, k);     \
+    f_rn(bo, bi, 2, k);     \
+    f_rn(bo, bi, 3, k);     \
+    k += 4
+
+#define f_lround(bo, bi, k) \
+    f_rl(bo, bi, 0, k);     \
+    f_rl(bo, bi, 1, k);     \
+    f_rl(bo, bi, 2, k);     \
+    f_rl(bo, bi, 3, k)
+
+static void aes_encrypt(void *ctx_arg, u8 *out, const u8 *in)
+{
+	const struct aes_ctx *ctx = ctx_arg;
+	u32 b0[4], b1[4];
+	const u32 *kp = E_KEY + 4;
+
+	b0[0] = u32_in (in) ^ E_KEY[0];
+	b0[1] = u32_in (in + 4) ^ E_KEY[1];
+	b0[2] = u32_in (in + 8) ^ E_KEY[2];
+	b0[3] = u32_in (in + 12) ^ E_KEY[3];
+
+	if (ctx->key_length > 24) {
+		f_nround (b1, b0, kp);
+		f_nround (b0, b1, kp);
+	}
+
+	if (ctx->key_length > 16) {
+		f_nround (b1, b0, kp);
+		f_nround (b0, b1, kp);
+	}
+
+	f_nround (b1, b0, kp);
+	f_nround (b0, b1, kp);
+	f_nround (b1, b0, kp);
+	f_nround (b0, b1, kp);
+	f_nround (b1, b0, kp);
+	f_nround (b0, b1, kp);
+	f_nround (b1, b0, kp);
+	f_nround (b0, b1, kp);
+	f_nround (b1, b0, kp);
+	f_lround (b0, b1, kp);
+
+	u32_out (out, b0[0]);
+	u32_out (out + 4, b0[1]);
+	u32_out (out + 8, b0[2]);
+	u32_out (out + 12, b0[3]);
+}
+
+/* decrypt a block of text */
+
+#define i_nround(bo, bi, k) \
+    i_rn(bo, bi, 0, k);     \
+    i_rn(bo, bi, 1, k);     \
+    i_rn(bo, bi, 2, k);     \
+    i_rn(bo, bi, 3, k);     \
+    k -= 4
+
+#define i_lround(bo, bi, k) \
+    i_rl(bo, bi, 0, k);     \
+    i_rl(bo, bi, 1, k);     \
+    i_rl(bo, bi, 2, k);     \
+    i_rl(bo, bi, 3, k)
+
+static void aes_decrypt(void *ctx_arg, u8 *out, const u8 *in)
+{
+	const struct aes_ctx *ctx = ctx_arg;
+	u32 b0[4], b1[4];
+	const int key_len = ctx->key_length;
+	const u32 *kp = D_KEY + key_len + 20;
+
+	b0[0] = u32_in (in) ^ E_KEY[key_len + 24];
+	b0[1] = u32_in (in + 4) ^ E_KEY[key_len + 25];
+	b0[2] = u32_in (in + 8) ^ E_KEY[key_len + 26];
+	b0[3] = u32_in (in + 12) ^ E_KEY[key_len + 27];
+
+	if (key_len > 24) {
+		i_nround (b1, b0, kp);
+		i_nround (b0, b1, kp);
+	}
+
+	if (key_len > 16) {
+		i_nround (b1, b0, kp);
+		i_nround (b0, b1, kp);
+	}
+
+	i_nround (b1, b0, kp);
+	i_nround (b0, b1, kp);
+	i_nround (b1, b0, kp);
+	i_nround (b0, b1, kp);
+	i_nround (b1, b0, kp);
+	i_nround (b0, b1, kp);
+	i_nround (b1, b0, kp);
+	i_nround (b0, b1, kp);
+	i_nround (b1, b0, kp);
+	i_lround (b0, b1, kp);
+
+	u32_out (out, b0[0]);
+	u32_out (out + 4, b0[1]);
+	u32_out (out + 8, b0[2]);
+	u32_out (out + 12, b0[3]);
+}
+
+
+static struct crypto_alg aes_alg = {
+	.cra_name		=	"aes",
+	.cra_flags		=	CRYPTO_ALG_TYPE_CIPHER,
+	.cra_blocksize		=	AES_BLOCK_SIZE,
+	.cra_ctxsize		=	sizeof(struct aes_ctx),
+	.cra_module		=	THIS_MODULE,
+	.cra_list		=	LIST_HEAD_INIT(aes_alg.cra_list),
+	.cra_u			=	{
+		.cipher = {
+			.cia_min_keysize	=	AES_MIN_KEY_SIZE,
+			.cia_max_keysize	=	AES_MAX_KEY_SIZE,
+			.cia_setkey	   	= 	aes_set_key,
+			.cia_encrypt	 	=	aes_encrypt,
+			.cia_decrypt	  	=	aes_decrypt
+		}
+	}
+};
+
+static int __init aes_init(void)
+{
+	gen_tabs();
+	return crypto_register_alg(&aes_alg);
+}
+
+static void __exit aes_fini(void)
+{
+	crypto_unregister_alg(&aes_alg);
+}
+
+module_init(aes_init);
+module_exit(aes_fini);
+
+MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm");
+MODULE_LICENSE("Dual BSD/GPL");
+
diff --git a/drivers/staging/rtl8192su/ieee80211/api.c b/drivers/staging/rtl8192su/ieee80211/api.c
new file mode 100644
index 00000000000..c627d029528
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/api.c
@@ -0,0 +1,246 @@
+/*
+ * Scatterlist Cryptographic API.
+ *
+ * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
+ * Copyright (c) 2002 David S. Miller (davem@redhat.com)
+ *
+ * Portions derived from Cryptoapi, by Alexander Kjeldaas <astor@fast.no>
+ * and Nettle, by Niels Mé°ˆler.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+#include "kmap_types.h"
+
+#include <linux/init.h>
+#include <linux/module.h>
+//#include <linux/crypto.h>
+#include "rtl_crypto.h"
+#include <linux/errno.h>
+#include <linux/rwsem.h>
+#include <linux/slab.h>
+#include "internal.h"
+
+LIST_HEAD(crypto_alg_list);
+DECLARE_RWSEM(crypto_alg_sem);
+
+static inline int crypto_alg_get(struct crypto_alg *alg)
+{
+	return try_inc_mod_count(alg->cra_module);
+}
+
+static inline void crypto_alg_put(struct crypto_alg *alg)
+{
+	if (alg->cra_module)
+		__MOD_DEC_USE_COUNT(alg->cra_module);
+}
+
+struct crypto_alg *crypto_alg_lookup(const char *name)
+{
+	struct crypto_alg *q, *alg = NULL;
+
+	if (!name)
+		return NULL;
+
+	down_read(&crypto_alg_sem);
+
+	list_for_each_entry(q, &crypto_alg_list, cra_list) {
+		if (!(strcmp(q->cra_name, name))) {
+			if (crypto_alg_get(q))
+				alg = q;
+			break;
+		}
+	}
+
+	up_read(&crypto_alg_sem);
+	return alg;
+}
+
+static int crypto_init_flags(struct crypto_tfm *tfm, u32 flags)
+{
+	tfm->crt_flags = 0;
+
+	switch (crypto_tfm_alg_type(tfm)) {
+	case CRYPTO_ALG_TYPE_CIPHER:
+		return crypto_init_cipher_flags(tfm, flags);
+
+	case CRYPTO_ALG_TYPE_DIGEST:
+		return crypto_init_digest_flags(tfm, flags);
+
+	case CRYPTO_ALG_TYPE_COMPRESS:
+		return crypto_init_compress_flags(tfm, flags);
+
+	default:
+		break;
+	}
+
+	BUG();
+	return -EINVAL;
+}
+
+static int crypto_init_ops(struct crypto_tfm *tfm)
+{
+	switch (crypto_tfm_alg_type(tfm)) {
+	case CRYPTO_ALG_TYPE_CIPHER:
+		return crypto_init_cipher_ops(tfm);
+
+	case CRYPTO_ALG_TYPE_DIGEST:
+		return crypto_init_digest_ops(tfm);
+
+	case CRYPTO_ALG_TYPE_COMPRESS:
+		return crypto_init_compress_ops(tfm);
+
+	default:
+		break;
+	}
+
+	BUG();
+	return -EINVAL;
+}
+
+static void crypto_exit_ops(struct crypto_tfm *tfm)
+{
+	switch (crypto_tfm_alg_type(tfm)) {
+	case CRYPTO_ALG_TYPE_CIPHER:
+		crypto_exit_cipher_ops(tfm);
+		break;
+
+	case CRYPTO_ALG_TYPE_DIGEST:
+		crypto_exit_digest_ops(tfm);
+		break;
+
+	case CRYPTO_ALG_TYPE_COMPRESS:
+		crypto_exit_compress_ops(tfm);
+		break;
+
+	default:
+		BUG();
+
+	}
+}
+
+struct crypto_tfm *crypto_alloc_tfm(const char *name, u32 flags)
+{
+	struct crypto_tfm *tfm = NULL;
+	struct crypto_alg *alg;
+
+	alg = crypto_alg_mod_lookup(name);
+	if (alg == NULL)
+		goto out;
+
+	tfm = kmalloc(sizeof(*tfm) + alg->cra_ctxsize, GFP_KERNEL);
+	if (tfm == NULL)
+		goto out_put;
+
+	memset(tfm, 0, sizeof(*tfm) + alg->cra_ctxsize);
+
+	tfm->__crt_alg = alg;
+
+	if (crypto_init_flags(tfm, flags))
+		goto out_free_tfm;
+
+	if (crypto_init_ops(tfm)) {
+		crypto_exit_ops(tfm);
+		goto out_free_tfm;
+	}
+
+	goto out;
+
+out_free_tfm:
+	kfree(tfm);
+	tfm = NULL;
+out_put:
+	crypto_alg_put(alg);
+out:
+	return tfm;
+}
+
+void crypto_free_tfm(struct crypto_tfm *tfm)
+{
+	struct crypto_alg *alg = tfm->__crt_alg;
+	int size = sizeof(*tfm) + alg->cra_ctxsize;
+
+	crypto_exit_ops(tfm);
+	crypto_alg_put(alg);
+	memset(tfm, 0, size);
+	kfree(tfm);
+}
+
+int crypto_register_alg(struct crypto_alg *alg)
+{
+	int ret = 0;
+	struct crypto_alg *q;
+
+	down_write(&crypto_alg_sem);
+
+	list_for_each_entry(q, &crypto_alg_list, cra_list) {
+		if (!(strcmp(q->cra_name, alg->cra_name))) {
+			ret = -EEXIST;
+			goto out;
+		}
+	}
+
+	list_add_tail(&alg->cra_list, &crypto_alg_list);
+out:
+	up_write(&crypto_alg_sem);
+	return ret;
+}
+
+int crypto_unregister_alg(struct crypto_alg *alg)
+{
+	int ret = -ENOENT;
+	struct crypto_alg *q;
+
+	BUG_ON(!alg->cra_module);
+
+	down_write(&crypto_alg_sem);
+	list_for_each_entry(q, &crypto_alg_list, cra_list) {
+		if (alg == q) {
+			list_del(&alg->cra_list);
+			ret = 0;
+			goto out;
+		}
+	}
+out:
+	up_write(&crypto_alg_sem);
+	return ret;
+}
+
+int crypto_alg_available(const char *name, u32 flags)
+{
+	int ret = 0;
+	struct crypto_alg *alg = crypto_alg_mod_lookup(name);
+
+	if (alg) {
+		crypto_alg_put(alg);
+		ret = 1;
+	}
+
+	return ret;
+}
+
+static int __init init_crypto(void)
+{
+	printk(KERN_INFO "Initializing Cryptographic API\n");
+	crypto_init_proc();
+	return 0;
+}
+
+__initcall(init_crypto);
+
+/*
+EXPORT_SYMBOL_GPL(crypto_register_alg);
+EXPORT_SYMBOL_GPL(crypto_unregister_alg);
+EXPORT_SYMBOL_GPL(crypto_alloc_tfm);
+EXPORT_SYMBOL_GPL(crypto_free_tfm);
+EXPORT_SYMBOL_GPL(crypto_alg_available);
+*/
+
+EXPORT_SYMBOL_NOVERS(crypto_register_alg);
+EXPORT_SYMBOL_NOVERS(crypto_unregister_alg);
+EXPORT_SYMBOL_NOVERS(crypto_alloc_tfm);
+EXPORT_SYMBOL_NOVERS(crypto_free_tfm);
+EXPORT_SYMBOL_NOVERS(crypto_alg_available);
diff --git a/drivers/staging/rtl8192su/ieee80211/arc4.c b/drivers/staging/rtl8192su/ieee80211/arc4.c
new file mode 100644
index 00000000000..e408472af30
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/arc4.c
@@ -0,0 +1,103 @@
+/*
+ * Cryptographic API
+ *
+ * ARC4 Cipher Algorithm
+ *
+ * Jon Oberheide <jon@oberheide.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include "rtl_crypto.h"
+
+#define ARC4_MIN_KEY_SIZE	1
+#define ARC4_MAX_KEY_SIZE	256
+#define ARC4_BLOCK_SIZE		1
+
+struct arc4_ctx {
+	u8 S[256];
+	u8 x, y;
+};
+
+static int arc4_set_key(void *ctx_arg, const u8 *in_key, unsigned int key_len, u32 *flags)
+{
+	struct arc4_ctx *ctx = ctx_arg;
+	int i, j = 0, k = 0;
+
+	ctx->x = 1;
+	ctx->y = 0;
+
+	for(i = 0; i < 256; i++)
+		ctx->S[i] = i;
+
+	for(i = 0; i < 256; i++)
+	{
+		u8 a = ctx->S[i];
+		j = (j + in_key[k] + a) & 0xff;
+		ctx->S[i] = ctx->S[j];
+		ctx->S[j] = a;
+		if((unsigned int)++k >= key_len)
+			k = 0;
+	}
+
+	return 0;
+}
+
+static void arc4_crypt(void *ctx_arg, u8 *out, const u8 *in)
+{
+	struct arc4_ctx *ctx = ctx_arg;
+
+	u8 *const S = ctx->S;
+	u8 x = ctx->x;
+	u8 y = ctx->y;
+	u8 a, b;
+
+	a = S[x];
+	y = (y + a) & 0xff;
+	b = S[y];
+	S[x] = b;
+	S[y] = a;
+	x = (x + 1) & 0xff;
+	*out++ = *in ^ S[(a + b) & 0xff];
+
+	ctx->x = x;
+	ctx->y = y;
+}
+
+static struct crypto_alg arc4_alg = {
+	.cra_name		=	"arc4",
+	.cra_flags		=	CRYPTO_ALG_TYPE_CIPHER,
+	.cra_blocksize		=	ARC4_BLOCK_SIZE,
+	.cra_ctxsize		=	sizeof(struct arc4_ctx),
+	.cra_module		=	THIS_MODULE,
+	.cra_list		=	LIST_HEAD_INIT(arc4_alg.cra_list),
+	.cra_u			=	{ .cipher = {
+	.cia_min_keysize	=	ARC4_MIN_KEY_SIZE,
+	.cia_max_keysize	=	ARC4_MAX_KEY_SIZE,
+	.cia_setkey	   	= 	arc4_set_key,
+	.cia_encrypt	 	=	arc4_crypt,
+	.cia_decrypt	  	=	arc4_crypt } }
+};
+
+static int __init arc4_init(void)
+{
+	return crypto_register_alg(&arc4_alg);
+}
+
+
+static void __exit arc4_exit(void)
+{
+	crypto_unregister_alg(&arc4_alg);
+}
+
+module_init(arc4_init);
+module_exit(arc4_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("ARC4 Cipher Algorithm");
+MODULE_AUTHOR("Jon Oberheide <jon@oberheide.org>");
diff --git a/drivers/staging/rtl8192su/ieee80211/autoload.c b/drivers/staging/rtl8192su/ieee80211/autoload.c
new file mode 100644
index 00000000000..c97756f3b2e
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/autoload.c
@@ -0,0 +1,40 @@
+/*
+ * Cryptographic API.
+ *
+ * Algorithm autoloader.
+ *
+ * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+#include "kmap_types.h"
+
+#include <linux/kernel.h>
+//#include <linux/crypto.h>
+#include "rtl_crypto.h"
+#include <linux/string.h>
+#include <linux/kmod.h>
+#include "internal.h"
+
+/*
+ * A far more intelligent version of this is planned.  For now, just
+ * try an exact match on the name of the algorithm.
+ */
+void crypto_alg_autoload(const char *name)
+{
+	request_module(name);
+}
+
+struct crypto_alg *crypto_alg_mod_lookup(const char *name)
+{
+	struct crypto_alg *alg = crypto_alg_lookup(name);
+	if (alg == NULL) {
+		crypto_alg_autoload(name);
+		alg = crypto_alg_lookup(name);
+	}
+	return alg;
+}
diff --git a/drivers/staging/rtl8192su/ieee80211/cipher.c b/drivers/staging/rtl8192su/ieee80211/cipher.c
new file mode 100644
index 00000000000..1968acfe32b
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/cipher.c
@@ -0,0 +1,299 @@
+/*
+ * Cryptographic API.
+ *
+ * Cipher operations.
+ *
+ * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+#include <linux/kernel.h>
+//#include <linux/crypto.h>
+#include "rtl_crypto.h"
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <asm/scatterlist.h>
+#include "internal.h"
+#include "scatterwalk.h"
+
+typedef void (cryptfn_t)(void *, u8 *, const u8 *);
+typedef void (procfn_t)(struct crypto_tfm *, u8 *,
+                        u8*, cryptfn_t, int enc, void *, int);
+
+static inline void xor_64(u8 *a, const u8 *b)
+{
+	((u32 *)a)[0] ^= ((u32 *)b)[0];
+	((u32 *)a)[1] ^= ((u32 *)b)[1];
+}
+
+static inline void xor_128(u8 *a, const u8 *b)
+{
+	((u32 *)a)[0] ^= ((u32 *)b)[0];
+	((u32 *)a)[1] ^= ((u32 *)b)[1];
+	((u32 *)a)[2] ^= ((u32 *)b)[2];
+	((u32 *)a)[3] ^= ((u32 *)b)[3];
+}
+
+
+/*
+ * Generic encrypt/decrypt wrapper for ciphers, handles operations across
+ * multiple page boundaries by using temporary blocks.  In user context,
+ * the kernel is given a chance to schedule us once per block.
+ */
+static int crypt(struct crypto_tfm *tfm,
+		 struct scatterlist *dst,
+		 struct scatterlist *src,
+                 unsigned int nbytes, cryptfn_t crfn,
+                 procfn_t prfn, int enc, void *info)
+{
+	struct scatter_walk walk_in, walk_out;
+	const unsigned int bsize = crypto_tfm_alg_blocksize(tfm);
+	u8 tmp_src[bsize];
+	u8 tmp_dst[bsize];
+
+	if (!nbytes)
+		return 0;
+
+	if (nbytes % bsize) {
+		tfm->crt_flags |= CRYPTO_TFM_RES_BAD_BLOCK_LEN;
+		return -EINVAL;
+	}
+
+	scatterwalk_start(&walk_in, src);
+	scatterwalk_start(&walk_out, dst);
+
+	for(;;) {
+		u8 *src_p, *dst_p;
+		int in_place;
+
+		scatterwalk_map(&walk_in, 0);
+		scatterwalk_map(&walk_out, 1);
+		src_p = scatterwalk_whichbuf(&walk_in, bsize, tmp_src);
+		dst_p = scatterwalk_whichbuf(&walk_out, bsize, tmp_dst);
+		in_place = scatterwalk_samebuf(&walk_in, &walk_out,
+					       src_p, dst_p);
+
+		nbytes -= bsize;
+
+		scatterwalk_copychunks(src_p, &walk_in, bsize, 0);
+
+		prfn(tfm, dst_p, src_p, crfn, enc, info, in_place);
+
+		scatterwalk_done(&walk_in, 0, nbytes);
+
+		scatterwalk_copychunks(dst_p, &walk_out, bsize, 1);
+		scatterwalk_done(&walk_out, 1, nbytes);
+
+		if (!nbytes)
+			return 0;
+
+		crypto_yield(tfm);
+	}
+}
+
+static void cbc_process(struct crypto_tfm *tfm, u8 *dst, u8 *src,
+			cryptfn_t fn, int enc, void *info, int in_place)
+{
+	u8 *iv = info;
+
+	/* Null encryption */
+	if (!iv)
+		return;
+
+	if (enc) {
+		tfm->crt_u.cipher.cit_xor_block(iv, src);
+		fn(crypto_tfm_ctx(tfm), dst, iv);
+		memcpy(iv, dst, crypto_tfm_alg_blocksize(tfm));
+	} else {
+		u8 stack[in_place ? crypto_tfm_alg_blocksize(tfm) : 0];
+		u8 *buf = in_place ? stack : dst;
+
+		fn(crypto_tfm_ctx(tfm), buf, src);
+		tfm->crt_u.cipher.cit_xor_block(buf, iv);
+		memcpy(iv, src, crypto_tfm_alg_blocksize(tfm));
+		if (buf != dst)
+			memcpy(dst, buf, crypto_tfm_alg_blocksize(tfm));
+	}
+}
+
+static void ecb_process(struct crypto_tfm *tfm, u8 *dst, u8 *src,
+			cryptfn_t fn, int enc, void *info, int in_place)
+{
+	fn(crypto_tfm_ctx(tfm), dst, src);
+}
+
+static int setkey(struct crypto_tfm *tfm, const u8 *key, unsigned int keylen)
+{
+	struct cipher_alg *cia = &tfm->__crt_alg->cra_cipher;
+
+	if (keylen < cia->cia_min_keysize || keylen > cia->cia_max_keysize) {
+		tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+		return -EINVAL;
+	} else
+		return cia->cia_setkey(crypto_tfm_ctx(tfm), key, keylen,
+		                       &tfm->crt_flags);
+}
+
+static int ecb_encrypt(struct crypto_tfm *tfm,
+		       struct scatterlist *dst,
+                       struct scatterlist *src, unsigned int nbytes)
+{
+	return crypt(tfm, dst, src, nbytes,
+	             tfm->__crt_alg->cra_cipher.cia_encrypt,
+	             ecb_process, 1, NULL);
+}
+
+static int ecb_decrypt(struct crypto_tfm *tfm,
+                       struct scatterlist *dst,
+                       struct scatterlist *src,
+		       unsigned int nbytes)
+{
+	return crypt(tfm, dst, src, nbytes,
+	             tfm->__crt_alg->cra_cipher.cia_decrypt,
+	             ecb_process, 1, NULL);
+}
+
+static int cbc_encrypt(struct crypto_tfm *tfm,
+                       struct scatterlist *dst,
+                       struct scatterlist *src,
+		       unsigned int nbytes)
+{
+	return crypt(tfm, dst, src, nbytes,
+	             tfm->__crt_alg->cra_cipher.cia_encrypt,
+	             cbc_process, 1, tfm->crt_cipher.cit_iv);
+}
+
+static int cbc_encrypt_iv(struct crypto_tfm *tfm,
+                          struct scatterlist *dst,
+                          struct scatterlist *src,
+                          unsigned int nbytes, u8 *iv)
+{
+	return crypt(tfm, dst, src, nbytes,
+	             tfm->__crt_alg->cra_cipher.cia_encrypt,
+	             cbc_process, 1, iv);
+}
+
+static int cbc_decrypt(struct crypto_tfm *tfm,
+                       struct scatterlist *dst,
+                       struct scatterlist *src,
+		       unsigned int nbytes)
+{
+	return crypt(tfm, dst, src, nbytes,
+	             tfm->__crt_alg->cra_cipher.cia_decrypt,
+	             cbc_process, 0, tfm->crt_cipher.cit_iv);
+}
+
+static int cbc_decrypt_iv(struct crypto_tfm *tfm,
+                          struct scatterlist *dst,
+                          struct scatterlist *src,
+                          unsigned int nbytes, u8 *iv)
+{
+	return crypt(tfm, dst, src, nbytes,
+	             tfm->__crt_alg->cra_cipher.cia_decrypt,
+	             cbc_process, 0, iv);
+}
+
+static int nocrypt(struct crypto_tfm *tfm,
+                   struct scatterlist *dst,
+                   struct scatterlist *src,
+		   unsigned int nbytes)
+{
+	return -ENOSYS;
+}
+
+static int nocrypt_iv(struct crypto_tfm *tfm,
+                      struct scatterlist *dst,
+                      struct scatterlist *src,
+                      unsigned int nbytes, u8 *iv)
+{
+	return -ENOSYS;
+}
+
+int crypto_init_cipher_flags(struct crypto_tfm *tfm, u32 flags)
+{
+	u32 mode = flags & CRYPTO_TFM_MODE_MASK;
+
+	tfm->crt_cipher.cit_mode = mode ? mode : CRYPTO_TFM_MODE_ECB;
+	if (flags & CRYPTO_TFM_REQ_WEAK_KEY)
+		tfm->crt_flags = CRYPTO_TFM_REQ_WEAK_KEY;
+
+	return 0;
+}
+
+int crypto_init_cipher_ops(struct crypto_tfm *tfm)
+{
+	int ret = 0;
+	struct cipher_tfm *ops = &tfm->crt_cipher;
+
+	ops->cit_setkey = setkey;
+
+	switch (tfm->crt_cipher.cit_mode) {
+	case CRYPTO_TFM_MODE_ECB:
+		ops->cit_encrypt = ecb_encrypt;
+		ops->cit_decrypt = ecb_decrypt;
+		break;
+
+	case CRYPTO_TFM_MODE_CBC:
+		ops->cit_encrypt = cbc_encrypt;
+		ops->cit_decrypt = cbc_decrypt;
+		ops->cit_encrypt_iv = cbc_encrypt_iv;
+		ops->cit_decrypt_iv = cbc_decrypt_iv;
+		break;
+
+	case CRYPTO_TFM_MODE_CFB:
+		ops->cit_encrypt = nocrypt;
+		ops->cit_decrypt = nocrypt;
+		ops->cit_encrypt_iv = nocrypt_iv;
+		ops->cit_decrypt_iv = nocrypt_iv;
+		break;
+
+	case CRYPTO_TFM_MODE_CTR:
+		ops->cit_encrypt = nocrypt;
+		ops->cit_decrypt = nocrypt;
+		ops->cit_encrypt_iv = nocrypt_iv;
+		ops->cit_decrypt_iv = nocrypt_iv;
+		break;
+
+	default:
+		BUG();
+	}
+
+	if (ops->cit_mode == CRYPTO_TFM_MODE_CBC) {
+
+	    	switch (crypto_tfm_alg_blocksize(tfm)) {
+	    	case 8:
+	    		ops->cit_xor_block = xor_64;
+	    		break;
+
+	    	case 16:
+	    		ops->cit_xor_block = xor_128;
+	    		break;
+
+	    	default:
+	    		printk(KERN_WARNING "%s: block size %u not supported\n",
+	    		       crypto_tfm_alg_name(tfm),
+	    		       crypto_tfm_alg_blocksize(tfm));
+	    		ret = -EINVAL;
+	    		goto out;
+	    	}
+
+		ops->cit_ivsize = crypto_tfm_alg_blocksize(tfm);
+	    	ops->cit_iv = kmalloc(ops->cit_ivsize, GFP_KERNEL);
+		if (ops->cit_iv == NULL)
+			ret = -ENOMEM;
+	}
+
+out:
+	return ret;
+}
+
+void crypto_exit_cipher_ops(struct crypto_tfm *tfm)
+{
+	if (tfm->crt_cipher.cit_iv)
+		kfree(tfm->crt_cipher.cit_iv);
+}
diff --git a/drivers/staging/rtl8192su/ieee80211/compress.c b/drivers/staging/rtl8192su/ieee80211/compress.c
new file mode 100644
index 00000000000..c2df80e2ed9
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/compress.c
@@ -0,0 +1,64 @@
+/*
+ * Cryptographic API.
+ *
+ * Compression operations.
+ *
+ * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+#include <linux/types.h>
+//#include <linux/crypto.h>
+#include "rtl_crypto.h"
+#include <linux/errno.h>
+#include <asm/scatterlist.h>
+#include <linux/string.h>
+#include "internal.h"
+
+static int crypto_compress(struct crypto_tfm *tfm,
+                            const u8 *src, unsigned int slen,
+                            u8 *dst, unsigned int *dlen)
+{
+	return tfm->__crt_alg->cra_compress.coa_compress(crypto_tfm_ctx(tfm),
+	                                                 src, slen, dst,
+	                                                 dlen);
+}
+
+static int crypto_decompress(struct crypto_tfm *tfm,
+                             const u8 *src, unsigned int slen,
+                             u8 *dst, unsigned int *dlen)
+{
+	return tfm->__crt_alg->cra_compress.coa_decompress(crypto_tfm_ctx(tfm),
+	                                                   src, slen, dst,
+	                                                   dlen);
+}
+
+int crypto_init_compress_flags(struct crypto_tfm *tfm, u32 flags)
+{
+	return flags ? -EINVAL : 0;
+}
+
+int crypto_init_compress_ops(struct crypto_tfm *tfm)
+{
+	int ret = 0;
+	struct compress_tfm *ops = &tfm->crt_compress;
+
+	ret = tfm->__crt_alg->cra_compress.coa_init(crypto_tfm_ctx(tfm));
+	if (ret)
+		goto out;
+
+	ops->cot_compress = crypto_compress;
+	ops->cot_decompress = crypto_decompress;
+
+out:
+	return ret;
+}
+
+void crypto_exit_compress_ops(struct crypto_tfm *tfm)
+{
+	tfm->__crt_alg->cra_compress.coa_exit(crypto_tfm_ctx(tfm));
+}
diff --git a/drivers/staging/rtl8192su/ieee80211/crypto_compat.h b/drivers/staging/rtl8192su/ieee80211/crypto_compat.h
new file mode 100644
index 00000000000..587e8bb2db6
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/crypto_compat.h
@@ -0,0 +1,90 @@
+/*
+ * Header file to maintain compatibility among different kernel versions.
+ *
+ * Copyright (c) 2004-2006  <lawrence_wang@realsil.com.cn>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation. See README and COPYING for
+ * more details.
+ */
+
+#include <linux/crypto.h>
+
+static inline int crypto_cipher_encrypt(struct crypto_tfm *tfm,
+                                        struct scatterlist *dst,
+                                        struct scatterlist *src,
+                                        unsigned int nbytes)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER);
+	return tfm->crt_cipher.cit_encrypt(tfm, dst, src, nbytes);
+}
+
+
+static inline int crypto_cipher_decrypt(struct crypto_tfm *tfm,
+                                        struct scatterlist *dst,
+                                        struct scatterlist *src,
+                                        unsigned int nbytes)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER);
+	return tfm->crt_cipher.cit_decrypt(tfm, dst, src, nbytes);
+}
+
+#if 0
+/*
+ *	crypto_free_tfm - Free crypto transform
+ *	@tfm: Transform to free
+ *
+ *	crypto_free_tfm() frees up the transform and any associated resources,
+ *	then drops the refcount on the associated algorithm.
+ */
+void crypto_free_tfm(struct crypto_tfm *tfm)
+{
+	struct crypto_alg *alg;
+	int size;
+
+	if (unlikely(!tfm))
+		return;
+
+	alg = tfm->__crt_alg;
+	size = sizeof(*tfm) + alg->cra_ctxsize;
+
+	if (alg->cra_exit)
+		alg->cra_exit(tfm);
+	crypto_exit_ops(tfm);
+	crypto_mod_put(alg);
+	memset(tfm, 0, size);
+	kfree(tfm);
+}
+
+#endif
+#if 1
+ struct crypto_tfm *crypto_alloc_tfm(const char *name, u32 flags)
+{
+	struct crypto_tfm *tfm = NULL;
+	int err;
+	printk("call crypto_alloc_tfm!!!\n");
+	do {
+		struct crypto_alg *alg;
+
+		alg = crypto_alg_mod_lookup(name, 0, CRYPTO_ALG_ASYNC);
+		err = PTR_ERR(alg);
+		if (IS_ERR(alg))
+			continue;
+
+		tfm = __crypto_alloc_tfm(alg, flags);
+		err = 0;
+		if (IS_ERR(tfm)) {
+			crypto_mod_put(alg);
+			err = PTR_ERR(tfm);
+			tfm = NULL;
+		}
+	} while (err == -EAGAIN && !signal_pending(current));
+
+	return tfm;
+}
+#endif
+//EXPORT_SYMBOL_GPL(crypto_alloc_tfm);
+//EXPORT_SYMBOL_GPL(crypto_free_tfm);
+
+
diff --git a/drivers/staging/rtl8192su/ieee80211/digest.c b/drivers/staging/rtl8192su/ieee80211/digest.c
new file mode 100644
index 00000000000..1a95f2d3783
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/digest.c
@@ -0,0 +1,108 @@
+/*
+ * Cryptographic API.
+ *
+ * Digest operations.
+ *
+ * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+//#include <linux/crypto.h>
+#include "rtl_crypto.h"
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/highmem.h>
+#include <asm/scatterlist.h>
+#include "internal.h"
+
+static void init(struct crypto_tfm *tfm)
+{
+	tfm->__crt_alg->cra_digest.dia_init(crypto_tfm_ctx(tfm));
+}
+
+static void update(struct crypto_tfm *tfm,
+                   struct scatterlist *sg, unsigned int nsg)
+{
+	unsigned int i;
+
+	for (i = 0; i < nsg; i++) {
+
+		struct page *pg = sg[i].page;
+		unsigned int offset = sg[i].offset;
+		unsigned int l = sg[i].length;
+
+		do {
+			unsigned int bytes_from_page = min(l, ((unsigned int)
+							   (PAGE_SIZE)) -
+							   offset);
+			char *p = crypto_kmap(pg, 0) + offset;
+
+			tfm->__crt_alg->cra_digest.dia_update
+					(crypto_tfm_ctx(tfm), p,
+					 bytes_from_page);
+			crypto_kunmap(p, 0);
+			crypto_yield(tfm);
+			offset = 0;
+			pg++;
+			l -= bytes_from_page;
+		} while (l > 0);
+	}
+}
+
+static void final(struct crypto_tfm *tfm, u8 *out)
+{
+	tfm->__crt_alg->cra_digest.dia_final(crypto_tfm_ctx(tfm), out);
+}
+
+static int setkey(struct crypto_tfm *tfm, const u8 *key, unsigned int keylen)
+{
+	u32 flags;
+	if (tfm->__crt_alg->cra_digest.dia_setkey == NULL)
+		return -ENOSYS;
+	return tfm->__crt_alg->cra_digest.dia_setkey(crypto_tfm_ctx(tfm),
+						     key, keylen, &flags);
+}
+
+static void digest(struct crypto_tfm *tfm,
+                   struct scatterlist *sg, unsigned int nsg, u8 *out)
+{
+	unsigned int i;
+
+	tfm->crt_digest.dit_init(tfm);
+
+	for (i = 0; i < nsg; i++) {
+		char *p = crypto_kmap(sg[i].page, 0) + sg[i].offset;
+		tfm->__crt_alg->cra_digest.dia_update(crypto_tfm_ctx(tfm),
+		                                      p, sg[i].length);
+		crypto_kunmap(p, 0);
+		crypto_yield(tfm);
+	}
+	crypto_digest_final(tfm, out);
+}
+
+int crypto_init_digest_flags(struct crypto_tfm *tfm, u32 flags)
+{
+	return flags ? -EINVAL : 0;
+}
+
+int crypto_init_digest_ops(struct crypto_tfm *tfm)
+{
+	struct digest_tfm *ops = &tfm->crt_digest;
+
+	ops->dit_init	= init;
+	ops->dit_update	= update;
+	ops->dit_final	= final;
+	ops->dit_digest	= digest;
+	ops->dit_setkey	= setkey;
+
+	return crypto_alloc_hmac_block(tfm);
+}
+
+void crypto_exit_digest_ops(struct crypto_tfm *tfm)
+{
+	crypto_free_hmac_block(tfm);
+}
diff --git a/drivers/staging/rtl8192su/ieee80211/dot11d.c b/drivers/staging/rtl8192su/ieee80211/dot11d.c
new file mode 100644
index 00000000000..e5f2dedc437
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/dot11d.c
@@ -0,0 +1,239 @@
+#ifdef ENABLE_DOT11D
+//-----------------------------------------------------------------------------
+//	File:
+//		Dot11d.c
+//
+//	Description:
+//		Implement 802.11d.
+//
+//-----------------------------------------------------------------------------
+
+#include "dot11d.h"
+
+void
+Dot11d_Init(struct ieee80211_device *ieee)
+{
+	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(ieee);
+
+	pDot11dInfo->bEnabled = 0;
+
+	pDot11dInfo->State = DOT11D_STATE_NONE;
+	pDot11dInfo->CountryIeLen = 0;
+	memset(pDot11dInfo->channel_map, 0, MAX_CHANNEL_NUMBER+1);
+	memset(pDot11dInfo->MaxTxPwrDbmList, 0xFF, MAX_CHANNEL_NUMBER+1);
+	RESET_CIE_WATCHDOG(ieee);
+
+	printk("Dot11d_Init()\n");
+}
+
+//
+//	Description:
+//		Reset to the state as we are just entering a regulatory domain.
+//
+void
+Dot11d_Reset(struct ieee80211_device *ieee)
+{
+	u32 i;
+	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(ieee);
+#if 0
+	if(!pDot11dInfo->bEnabled)
+		return;
+#endif
+	// Clear old channel map
+	memset(pDot11dInfo->channel_map, 0, MAX_CHANNEL_NUMBER+1);
+	memset(pDot11dInfo->MaxTxPwrDbmList, 0xFF, MAX_CHANNEL_NUMBER+1);
+	// Set new channel map
+	for (i=1; i<=11; i++) {
+		(pDot11dInfo->channel_map)[i] = 1;
+	}
+	for (i=12; i<=14; i++) {
+		(pDot11dInfo->channel_map)[i] = 2;
+	}
+
+	pDot11dInfo->State = DOT11D_STATE_NONE;
+	pDot11dInfo->CountryIeLen = 0;
+	RESET_CIE_WATCHDOG(ieee);
+
+	//printk("Dot11d_Reset()\n");
+}
+
+//
+//	Description:
+//		Update country IE from Beacon or Probe Resopnse
+//		and configure PHY for operation in the regulatory domain.
+//
+//	TODO:
+//		Configure Tx power.
+//
+//	Assumption:
+//		1. IS_DOT11D_ENABLE() is TRUE.
+//		2. Input IE is an valid one.
+//
+void
+Dot11d_UpdateCountryIe(
+	struct ieee80211_device *dev,
+	u8 *		pTaddr,
+	u16	CoutryIeLen,
+	u8 * pCoutryIe
+	)
+{
+	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);
+	u8 i, j, NumTriples, MaxChnlNum;
+	PCHNL_TXPOWER_TRIPLE pTriple;
+
+	memset(pDot11dInfo->channel_map, 0, MAX_CHANNEL_NUMBER+1);
+	memset(pDot11dInfo->MaxTxPwrDbmList, 0xFF, MAX_CHANNEL_NUMBER+1);
+	MaxChnlNum = 0;
+	NumTriples = (CoutryIeLen - 3) / 3; // skip 3-byte country string.
+	pTriple = (PCHNL_TXPOWER_TRIPLE)(pCoutryIe + 3);
+	for(i = 0; i < NumTriples; i++)
+	{
+		if(MaxChnlNum >= pTriple->FirstChnl)
+		{ // It is not in a monotonically increasing order, so stop processing.
+			printk("Dot11d_UpdateCountryIe(): Invalid country IE, skip it........1\n");
+			return;
+		}
+		if(MAX_CHANNEL_NUMBER < (pTriple->FirstChnl + pTriple->NumChnls))
+		{ // It is not a valid set of channel id, so stop processing.
+			printk("Dot11d_UpdateCountryIe(): Invalid country IE, skip it........2\n");
+			return;
+		}
+
+		for(j = 0 ; j < pTriple->NumChnls; j++)
+		{
+			pDot11dInfo->channel_map[pTriple->FirstChnl + j] = 1;
+			pDot11dInfo->MaxTxPwrDbmList[pTriple->FirstChnl + j] = pTriple->MaxTxPowerInDbm;
+			MaxChnlNum = pTriple->FirstChnl + j;
+		}
+
+		pTriple = (PCHNL_TXPOWER_TRIPLE)((u8*)pTriple + 3);
+	}
+#if 1
+	//printk("Dot11d_UpdateCountryIe(): Channel List:\n");
+	printk("Channel List:");
+	for(i=1; i<= MAX_CHANNEL_NUMBER; i++)
+		if(pDot11dInfo->channel_map[i] > 0)
+			printk(" %d", i);
+	printk("\n");
+#endif
+
+	UPDATE_CIE_SRC(dev, pTaddr);
+
+	pDot11dInfo->CountryIeLen = CoutryIeLen;
+	memcpy(pDot11dInfo->CountryIeBuf, pCoutryIe,CoutryIeLen);
+	pDot11dInfo->State = DOT11D_STATE_LEARNED;
+}
+
+
+u8
+DOT11D_GetMaxTxPwrInDbm(
+	struct ieee80211_device *dev,
+	u8 Channel
+	)
+{
+	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);
+	u8 MaxTxPwrInDbm = 255;
+
+	if(MAX_CHANNEL_NUMBER < Channel)
+	{
+		printk("DOT11D_GetMaxTxPwrInDbm(): Invalid Channel\n");
+		return MaxTxPwrInDbm;
+	}
+	if(pDot11dInfo->channel_map[Channel])
+	{
+		MaxTxPwrInDbm = pDot11dInfo->MaxTxPwrDbmList[Channel];
+	}
+
+	return MaxTxPwrInDbm;
+}
+
+
+void
+DOT11D_ScanComplete(
+	struct ieee80211_device * dev
+	)
+{
+	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);
+
+	switch(pDot11dInfo->State)
+	{
+	case DOT11D_STATE_LEARNED:
+		pDot11dInfo->State = DOT11D_STATE_DONE;
+		break;
+
+	case DOT11D_STATE_DONE:
+		if( GET_CIE_WATCHDOG(dev) == 0 )
+		{ // Reset country IE if previous one is gone.
+			Dot11d_Reset(dev);
+		}
+		break;
+	case DOT11D_STATE_NONE:
+		break;
+	}
+}
+
+int IsLegalChannel(
+	struct ieee80211_device * dev,
+	u8 channel
+)
+{
+	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);
+
+	if(MAX_CHANNEL_NUMBER < channel)
+	{
+		printk("IsLegalChannel(): Invalid Channel\n");
+		return 0;
+	}
+	if(pDot11dInfo->channel_map[channel] > 0)
+		return 1;
+	return 0;
+}
+
+int ToLegalChannel(
+	struct ieee80211_device * dev,
+	u8 channel
+)
+{
+	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);
+	u8 default_chn = 0;
+	u32 i = 0;
+
+	for (i=1; i<= MAX_CHANNEL_NUMBER; i++)
+	{
+		if(pDot11dInfo->channel_map[i] > 0)
+		{
+			default_chn = i;
+			break;
+		}
+	}
+
+	if(MAX_CHANNEL_NUMBER < channel)
+	{
+		printk("IsLegalChannel(): Invalid Channel\n");
+		return default_chn;
+	}
+
+	if(pDot11dInfo->channel_map[channel] > 0)
+		return channel;
+
+	return default_chn;
+}
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+EXPORT_SYMBOL(Dot11d_Init);
+EXPORT_SYMBOL(Dot11d_Reset);
+EXPORT_SYMBOL(Dot11d_UpdateCountryIe);
+EXPORT_SYMBOL(DOT11D_GetMaxTxPwrInDbm);
+EXPORT_SYMBOL(DOT11D_ScanComplete);
+EXPORT_SYMBOL(IsLegalChannel);
+EXPORT_SYMBOL(ToLegalChannel);
+#else
+EXPORT_SYMBOL_NOVERS(Dot11d_Init);
+EXPORT_SYMBOL_NOVERS(Dot11d_Reset);
+EXPORT_SYMBOL_NOVERS(Dot11d_UpdateCountryIe);
+EXPORT_SYMBOL_NOVERS(DOT11D_GetMaxTxPwrInDbm);
+EXPORT_SYMBOL_NOVERS(DOT11D_ScanComplete);
+EXPORT_SYMBOL_NOVERS(IsLegalChannel);
+EXPORT_SYMBOL_NOVERS(ToLegalChannel);
+#endif
+
+#endif
diff --git a/drivers/staging/rtl8192su/ieee80211/dot11d.h b/drivers/staging/rtl8192su/ieee80211/dot11d.h
new file mode 100644
index 00000000000..15b7a4ba37b
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/dot11d.h
@@ -0,0 +1,102 @@
+#ifndef __INC_DOT11D_H
+#define __INC_DOT11D_H
+
+#ifdef ENABLE_DOT11D
+#include "ieee80211.h"
+
+//#define ENABLE_DOT11D
+
+//#define DOT11D_MAX_CHNL_NUM 83
+
+typedef struct _CHNL_TXPOWER_TRIPLE {
+	u8 FirstChnl;
+	u8  NumChnls;
+	u8  MaxTxPowerInDbm;
+}CHNL_TXPOWER_TRIPLE, *PCHNL_TXPOWER_TRIPLE;
+
+typedef enum _DOT11D_STATE {
+	DOT11D_STATE_NONE = 0,
+	DOT11D_STATE_LEARNED,
+	DOT11D_STATE_DONE,
+}DOT11D_STATE;
+
+typedef struct _RT_DOT11D_INFO {
+	//DECLARE_RT_OBJECT(RT_DOT11D_INFO);
+
+	bool bEnabled; // dot11MultiDomainCapabilityEnabled
+
+	u16 CountryIeLen; // > 0 if CountryIeBuf[] contains valid country information element.
+	u8  CountryIeBuf[MAX_IE_LEN];
+	u8  CountryIeSrcAddr[6]; // Source AP of the country IE.
+	u8  CountryIeWatchdog;
+
+	u8  channel_map[MAX_CHANNEL_NUMBER+1];  //!!!Value 0: Invalid, 1: Valid (active scan), 2: Valid (passive scan)
+	//u8  ChnlListLen; // #Bytes valid in ChnlList[].
+	//u8  ChnlList[DOT11D_MAX_CHNL_NUM];
+	u8  MaxTxPwrDbmList[MAX_CHANNEL_NUMBER+1];
+
+	DOT11D_STATE State;
+}RT_DOT11D_INFO, *PRT_DOT11D_INFO;
+#define eqMacAddr(a,b)		( ((a)[0]==(b)[0] && (a)[1]==(b)[1] && (a)[2]==(b)[2] && (a)[3]==(b)[3] && (a)[4]==(b)[4] && (a)[5]==(b)[5]) ? 1:0 )
+#define cpMacAddr(des,src)	      ((des)[0]=(src)[0],(des)[1]=(src)[1],(des)[2]=(src)[2],(des)[3]=(src)[3],(des)[4]=(src)[4],(des)[5]=(src)[5])
+#define GET_DOT11D_INFO(__pIeeeDev) ((PRT_DOT11D_INFO)((__pIeeeDev)->pDot11dInfo))
+
+#define IS_DOT11D_ENABLE(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->bEnabled
+#define IS_COUNTRY_IE_VALID(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen > 0)
+
+#define IS_EQUAL_CIE_SRC(__pIeeeDev, __pTa) eqMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa)
+#define UPDATE_CIE_SRC(__pIeeeDev, __pTa) cpMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa)
+
+#define IS_COUNTRY_IE_CHANGED(__pIeeeDev, __Ie) \
+	(((__Ie).Length == 0 || (__Ie).Length != GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen) ? \
+	FALSE : \
+	(!memcmp(GET_DOT11D_INFO(__pIeeeDev)->CountryIeBuf, (__Ie).Octet, (__Ie).Length)))
+
+#define CIE_WATCHDOG_TH 1
+#define GET_CIE_WATCHDOG(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->CountryIeWatchdog
+#define RESET_CIE_WATCHDOG(__pIeeeDev) GET_CIE_WATCHDOG(__pIeeeDev) = 0
+#define UPDATE_CIE_WATCHDOG(__pIeeeDev) ++GET_CIE_WATCHDOG(__pIeeeDev)
+
+#define IS_DOT11D_STATE_DONE(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->State == DOT11D_STATE_DONE)
+
+
+void
+Dot11d_Init(
+	struct ieee80211_device *dev
+	);
+
+void
+Dot11d_Reset(
+	struct ieee80211_device *dev
+	);
+
+void
+Dot11d_UpdateCountryIe(
+	struct ieee80211_device *dev,
+	u8 *		pTaddr,
+	u16	CoutryIeLen,
+	u8 * pCoutryIe
+	);
+
+u8
+DOT11D_GetMaxTxPwrInDbm(
+	struct ieee80211_device *dev,
+	u8 Channel
+	);
+
+void
+DOT11D_ScanComplete(
+	struct ieee80211_device * dev
+	);
+
+int IsLegalChannel(
+	struct ieee80211_device * dev,
+	u8 channel
+);
+
+int ToLegalChannel(
+	struct ieee80211_device * dev,
+	u8 channel
+);
+#endif //ENABLE_DOT11D
+#endif // #ifndef __INC_DOT11D_H
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211.h b/drivers/staging/rtl8192su/ieee80211/ieee80211.h
new file mode 100644
index 00000000000..720bfcbfadc
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211.h
@@ -0,0 +1,2901 @@
+/*
+ * Merged with mainline ieee80211.h in Aug 2004.  Original ieee802_11
+ * remains copyright by the original authors
+ *
+ * Portions of the merged code are based on Host AP (software wireless
+ * LAN access point) driver for Intersil Prism2/2.5/3.
+ *
+ * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+ * <jkmaline@cc.hut.fi>
+ * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+ *
+ * Adaption to a generic IEEE 802.11 stack by James Ketrenos
+ * <jketreno@linux.intel.com>
+ * Copyright (c) 2004, Intel Corporation
+ *
+ * Modified for Realtek's wi-fi cards by Andrea Merello
+ * <andreamrl@tiscali.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation. See README and COPYING for
+ * more details.
+ */
+#ifndef IEEE80211_H
+#define IEEE80211_H
+#include <linux/if_ether.h> /* ETH_ALEN */
+#include <linux/kernel.h>   /* ARRAY_SIZE */
+#include <linux/version.h>
+#include <linux/module.h>
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+#include <linux/jiffies.h>
+#else
+#include <linux/jffs.h>
+#include <linux/tqueue.h>
+#endif
+#include <linux/timer.h>
+#include <linux/sched.h>
+
+#include <linux/delay.h>
+#include <linux/wireless.h>
+
+#include "rtl819x_HT.h"
+#include "rtl819x_BA.h"
+#include "rtl819x_TS.h"
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20))
+#ifndef bool
+typedef enum{false = 0, true} bool;
+#endif
+#endif
+
+#ifndef IW_MODE_MONITOR
+#define IW_MODE_MONITOR 6
+#endif
+
+#ifndef IWEVCUSTOM
+#define IWEVCUSTOM 0x8c02
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
+#ifndef __bitwise
+#define __bitwise __attribute__((bitwise))
+#endif
+typedef __u16  __le16;
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,27))
+struct iw_spy_data{
+	/* --- Standard spy support --- */
+	int 			spy_number;
+	u_char 			spy_address[IW_MAX_SPY][ETH_ALEN];
+	struct iw_quality	spy_stat[IW_MAX_SPY];
+	/* --- Enhanced spy support (event) */
+	struct iw_quality	spy_thr_low; /* Low threshold */
+	struct iw_quality	spy_thr_high; /* High threshold */
+	u_char			spy_thr_under[IW_MAX_SPY];
+};
+#endif
+#endif
+
+#ifndef container_of
+/**
+ * container_of - cast a member of a structure out to the containing structure
+ *
+ * @ptr:        the pointer to the member.
+ * @type:       the type of the container struct this is embedded in.
+ * @member:     the name of the member within the struct.
+ *
+ */
+#define container_of(ptr, type, member) ({                      \
+        const typeof( ((type *)0)->member ) *__mptr = (ptr);    \
+        (type *)( (char *)__mptr - offsetof(type,member) );})
+#endif
+
+#define KEY_TYPE_NA		0x0
+#define KEY_TYPE_WEP40 		0x1
+#define KEY_TYPE_TKIP		0x2
+#define KEY_TYPE_CCMP		0x4
+#define KEY_TYPE_WEP104		0x5
+
+/* added for rtl819x tx procedure */
+#define MAX_QUEUE_SIZE		0x10
+
+//
+// 8190 queue mapping
+//
+#define BK_QUEUE                               0
+#define BE_QUEUE                               1
+#define VI_QUEUE                               2
+#define VO_QUEUE                               3
+#define HCCA_QUEUE                             4
+#define TXCMD_QUEUE                            5
+#define MGNT_QUEUE                             6
+#define HIGH_QUEUE                             7
+#define BEACON_QUEUE                           8
+
+#define LOW_QUEUE                              BE_QUEUE
+#define NORMAL_QUEUE                           MGNT_QUEUE
+
+//added by amy for ps
+#define SWRF_TIMEOUT				50
+
+//added by amy for LEAP related
+#define IE_CISCO_FLAG_POSITION		0x08	// Flag byte: byte 8, numbered from 0.
+#define SUPPORT_CKIP_MIC			0x08	// bit3
+#define SUPPORT_CKIP_PK			0x10	// bit4
+//added by amy for ps
+// RF Off Level for IPS or HW/SW radio off
+#define	RT_RF_OFF_LEVL_ASPM			BIT0	// PCI ASPM
+#define	RT_RF_OFF_LEVL_CLK_REQ		BIT1	// PCI clock request
+#define	RT_RF_OFF_LEVL_PCI_D3			BIT2	// PCI D3 mode
+#define	RT_RF_OFF_LEVL_HALT_NIC		BIT3	// NIC halt, re-initialize hw parameters
+#define	RT_RF_OFF_LEVL_FREE_FW		BIT4	// FW free, re-download the FW
+#define	RT_RF_OFF_LEVL_FW_32K		BIT5	// FW in 32k
+#define	RT_RF_PS_LEVEL_ALWAYS_ASPM	BIT6	// Always enable ASPM and Clock Req in initialization.
+#define	RT_RF_LPS_DISALBE_2R			BIT30	// When LPS is on, disable 2R if no packet is received or transmittd.
+#define	RT_RF_LPS_LEVEL_ASPM			BIT31	// LPS with ASPM
+#define	RT_IN_PS_LEVEL(pPSC, _PS_FLAG)	((pPSC->CurPsLevel & _PS_FLAG) ? true : false)
+#define	RT_CLEAR_PS_LEVEL(pPSC, _PS_FLAG)	(pPSC->CurPsLevel &= (~(_PS_FLAG)))
+#define	RT_SET_PS_LEVEL(pPSC, _PS_FLAG)	(pPSC->CurPsLevel->CurPsLevel |= _PS_FLAG)
+/* defined for skb cb field */
+/* At most 28 byte */
+typedef struct cb_desc {
+        /* Tx Desc Related flags (8-9) */
+	u8 bLastIniPkt:1;
+	u8 bCmdOrInit:1;
+        u8 bFirstSeg:1;
+        u8 bLastSeg:1;
+        u8 bEncrypt:1;
+        u8 bTxDisableRateFallBack:1;
+        u8 bTxUseDriverAssingedRate:1;
+        u8 bHwSec:1; //indicate whether use Hw security. WB
+
+        u8 reserved1;
+
+        /* Tx Firmware Relaged flags (10-11)*/
+        u8 bCTSEnable:1;
+        u8 bRTSEnable:1;
+        u8 bUseShortGI:1;
+        u8 bUseShortPreamble:1;
+        u8 bTxEnableFwCalcDur:1;
+        u8 bAMPDUEnable:1;
+        u8 bRTSSTBC:1;
+        u8 RTSSC:1;
+
+        u8 bRTSBW:1;
+        u8 bPacketBW:1;
+	u8 bRTSUseShortPreamble:1;
+	u8 bRTSUseShortGI:1;
+	u8 bMulticast:1;
+	u8 bBroadcast:1;
+        //u8 reserved2:2;
+        u8 drv_agg_enable:1;
+        u8 reserved2:1;
+
+        /* Tx Desc related element(12-19) */
+        u8 rata_index;
+        u8 queue_index;
+        //u8 reserved3;
+        //u8 reserved4;
+        u16 txbuf_size;
+        //u8 reserved5;
+	u8 RATRIndex;
+        u8 reserved6;
+        u8 reserved7;
+        u8 reserved8;
+
+        /* Tx firmware related element(20-27) */
+        u8 data_rate;
+        u8 rts_rate;
+        u8 ampdu_factor;
+        u8 ampdu_density;
+        //u8 reserved9;
+        //u8 reserved10;
+        //u8 reserved11;
+        u8 DrvAggrNum;
+	u16 pkt_size;
+        u8 reserved12;
+}cb_desc, *pcb_desc;
+
+/*--------------------------Define -------------------------------------------*/
+#define MGN_1M                  0x02
+#define MGN_2M                  0x04
+#define MGN_5_5M                0x0b
+#define MGN_11M                 0x16
+
+#define MGN_6M                  0x0c
+#define MGN_9M                  0x12
+#define MGN_12M                 0x18
+#define MGN_18M                 0x24
+#define MGN_24M                 0x30
+#define MGN_36M                 0x48
+#define MGN_48M                 0x60
+#define MGN_54M                 0x6c
+
+#define MGN_MCS0                0x80
+#define MGN_MCS1                0x81
+#define MGN_MCS2                0x82
+#define MGN_MCS3                0x83
+#define MGN_MCS4                0x84
+#define MGN_MCS5                0x85
+#define MGN_MCS6                0x86
+#define MGN_MCS7                0x87
+#define MGN_MCS8                0x88
+#define MGN_MCS9                0x89
+#define MGN_MCS10               0x8a
+#define MGN_MCS11               0x8b
+#define MGN_MCS12               0x8c
+#define MGN_MCS13               0x8d
+#define MGN_MCS14               0x8e
+#define MGN_MCS15               0x8f
+#define	MGN_MCS0_SG			0x90
+#define	MGN_MCS1_SG			0x91
+#define	MGN_MCS2_SG			0x92
+#define	MGN_MCS3_SG			0x93
+#define	MGN_MCS4_SG			0x94
+#define	MGN_MCS5_SG			0x95
+#define	MGN_MCS6_SG			0x96
+#define	MGN_MCS7_SG			0x97
+#define	MGN_MCS8_SG			0x98
+#define	MGN_MCS9_SG			0x99
+#define	MGN_MCS10_SG		0x9a
+#define	MGN_MCS11_SG		0x9b
+#define	MGN_MCS12_SG		0x9c
+#define	MGN_MCS13_SG		0x9d
+#define	MGN_MCS14_SG		0x9e
+#define	MGN_MCS15_SG		0x9f
+
+
+//----------------------------------------------------------------------------
+//		802.11 Management frame Reason Code field
+//----------------------------------------------------------------------------
+enum	_ReasonCode{
+	unspec_reason	= 0x1,
+	auth_not_valid	= 0x2,
+	deauth_lv_ss	= 0x3,
+	inactivity		= 0x4,
+	ap_overload 	= 0x5,
+	class2_err		= 0x6,
+	class3_err		= 0x7,
+	disas_lv_ss 	= 0x8,
+	asoc_not_auth	= 0x9,
+
+	//----MIC_CHECK
+	mic_failure 	= 0xe,
+	//----END MIC_CHECK
+
+	// Reason code defined in 802.11i D10.0 p.28.
+	invalid_IE		= 0x0d,
+	four_way_tmout	= 0x0f,
+	two_way_tmout	= 0x10,
+	IE_dismatch 	= 0x11,
+	invalid_Gcipher = 0x12,
+	invalid_Pcipher = 0x13,
+	invalid_AKMP	= 0x14,
+	unsup_RSNIEver = 0x15,
+	invalid_RSNIE	= 0x16,
+	auth_802_1x_fail= 0x17,
+	ciper_reject		= 0x18,
+
+	// Reason code defined in 7.3.1.7, 802.1e D13.0, p.42. Added by Annie, 2005-11-15.
+	QoS_unspec		= 0x20, // 32
+	QAP_bandwidth	= 0x21, // 33
+	poor_condition	= 0x22, // 34
+	no_facility 	= 0x23, // 35
+							// Where is 36???
+	req_declined	= 0x25, // 37
+	invalid_param	= 0x26, // 38
+	req_not_honored= 0x27,	// 39
+	TS_not_created	= 0x2F, // 47
+	DL_not_allowed	= 0x30, // 48
+	dest_not_exist	= 0x31, // 49
+	dest_not_QSTA	= 0x32, // 50
+};
+
+
+
+#define aSifsTime	 (((priv->ieee80211->current_network.mode == IEEE_A)||(priv->ieee80211->current_network.mode == IEEE_N_24G)||(priv->ieee80211->current_network.mode == IEEE_N_5G))? 16 : 10)
+
+#define MGMT_QUEUE_NUM 5
+
+#define IEEE_CMD_SET_WPA_PARAM			1
+#define	IEEE_CMD_SET_WPA_IE			2
+#define IEEE_CMD_SET_ENCRYPTION			3
+#define IEEE_CMD_MLME				4
+
+#define IEEE_PARAM_WPA_ENABLED			1
+#define IEEE_PARAM_TKIP_COUNTERMEASURES		2
+#define IEEE_PARAM_DROP_UNENCRYPTED		3
+#define IEEE_PARAM_PRIVACY_INVOKED		4
+#define IEEE_PARAM_AUTH_ALGS			5
+#define IEEE_PARAM_IEEE_802_1X			6
+//It should consistent with the driver_XXX.c
+//   David, 2006.9.26
+#define IEEE_PARAM_WPAX_SELECT			7
+//Added for notify the encryption type selection
+//   David, 2006.9.26
+#define IEEE_PROTO_WPA				1
+#define IEEE_PROTO_RSN				2
+//Added for notify the encryption type selection
+//   David, 2006.9.26
+#define IEEE_WPAX_USEGROUP			0
+#define IEEE_WPAX_WEP40				1
+#define IEEE_WPAX_TKIP				2
+#define IEEE_WPAX_WRAP   			3
+#define IEEE_WPAX_CCMP				4
+#define IEEE_WPAX_WEP104			5
+
+#define IEEE_KEY_MGMT_IEEE8021X			1
+#define IEEE_KEY_MGMT_PSK			2
+
+#define IEEE_MLME_STA_DEAUTH			1
+#define IEEE_MLME_STA_DISASSOC			2
+
+
+#define IEEE_CRYPT_ERR_UNKNOWN_ALG		2
+#define IEEE_CRYPT_ERR_UNKNOWN_ADDR		3
+#define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED	4
+#define IEEE_CRYPT_ERR_KEY_SET_FAILED		5
+#define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED	6
+#define IEEE_CRYPT_ERR_CARD_CONF_FAILED		7
+
+
+#define	IEEE_CRYPT_ALG_NAME_LEN			16
+
+#define MAX_IE_LEN  0xff
+
+// added for kernel conflict
+#define ieee80211_crypt_deinit_entries 	ieee80211_crypt_deinit_entries_rsl
+#define ieee80211_crypt_deinit_handler 	ieee80211_crypt_deinit_handler_rsl
+#define ieee80211_crypt_delayed_deinit 	ieee80211_crypt_delayed_deinit_rsl
+#define ieee80211_register_crypto_ops  	ieee80211_register_crypto_ops_rsl
+#define ieee80211_unregister_crypto_ops ieee80211_unregister_crypto_ops_rsl
+#define ieee80211_get_crypto_ops 	ieee80211_get_crypto_ops_rsl
+
+#define ieee80211_ccmp_null		ieee80211_ccmp_null_rsl
+
+#define ieee80211_tkip_null		ieee80211_tkip_null_rsl
+
+#define ieee80211_wep_null		ieee80211_wep_null_rsl
+
+#define free_ieee80211          	free_ieee80211_rsl
+#define alloc_ieee80211        		alloc_ieee80211_rsl
+
+#define ieee80211_rx 			ieee80211_rx_rsl
+#define ieee80211_rx_mgt		ieee80211_rx_mgt_rsl
+
+#define ieee80211_get_beacon		ieee80211_get_beacon_rsl
+#define ieee80211_wake_queue		ieee80211_wake_queue_rsl
+#define ieee80211_stop_queue		ieee80211_stop_queue_rsl
+#define ieee80211_reset_queue		ieee80211_reset_queue_rsl
+#define ieee80211_softmac_stop_protocol	ieee80211_softmac_stop_protocol_rsl
+#define ieee80211_softmac_start_protocol ieee80211_softmac_start_protocol_rsl
+#define ieee80211_is_shortslot		ieee80211_is_shortslot_rsl
+#define ieee80211_is_54g		ieee80211_is_54g_rsl
+#define ieee80211_wpa_supplicant_ioctl	ieee80211_wpa_supplicant_ioctl_rsl
+#define ieee80211_ps_tx_ack		ieee80211_ps_tx_ack_rsl
+#define ieee80211_softmac_xmit		ieee80211_softmac_xmit_rsl
+#define ieee80211_stop_send_beacons	ieee80211_stop_send_beacons_rsl
+#define notify_wx_assoc_event		notify_wx_assoc_event_rsl
+#define SendDisassociation		SendDisassociation_rsl
+#define ieee80211_disassociate		ieee80211_disassociate_rsl
+#define ieee80211_start_send_beacons	ieee80211_start_send_beacons_rsl
+#define ieee80211_stop_scan		ieee80211_stop_scan_rsl
+#define ieee80211_send_probe_requests	ieee80211_send_probe_requests_rsl
+#define ieee80211_softmac_scan_syncro	ieee80211_softmac_scan_syncro_rsl
+#define ieee80211_start_scan_syncro	ieee80211_start_scan_syncro_rsl
+
+#define ieee80211_wx_get_essid		ieee80211_wx_get_essid_rsl
+#define ieee80211_wx_set_essid		ieee80211_wx_set_essid_rsl
+#define ieee80211_wx_set_rate		ieee80211_wx_set_rate_rsl
+#define ieee80211_wx_get_rate		ieee80211_wx_get_rate_rsl
+#define ieee80211_wx_set_wap		ieee80211_wx_set_wap_rsl
+#define ieee80211_wx_get_wap		ieee80211_wx_get_wap_rsl
+#define ieee80211_wx_set_mode		ieee80211_wx_set_mode_rsl
+#define ieee80211_wx_get_mode		ieee80211_wx_get_mode_rsl
+#define ieee80211_wx_set_scan		ieee80211_wx_set_scan_rsl
+#define ieee80211_wx_get_freq		ieee80211_wx_get_freq_rsl
+#define ieee80211_wx_set_freq		ieee80211_wx_set_freq_rsl
+#define ieee80211_wx_set_rawtx		ieee80211_wx_set_rawtx_rsl
+#define ieee80211_wx_get_name		ieee80211_wx_get_name_rsl
+#define ieee80211_wx_set_power		ieee80211_wx_set_power_rsl
+#define ieee80211_wx_get_power		ieee80211_wx_get_power_rsl
+#define ieee80211_wlan_frequencies	ieee80211_wlan_frequencies_rsl
+#define ieee80211_wx_set_rts		ieee80211_wx_set_rts_rsl
+#define ieee80211_wx_get_rts		ieee80211_wx_get_rts_rsl
+
+#define ieee80211_txb_free		ieee80211_txb_free_rsl
+
+#define ieee80211_wx_set_gen_ie		ieee80211_wx_set_gen_ie_rsl
+#define ieee80211_wx_get_scan		ieee80211_wx_get_scan_rsl
+#define ieee80211_wx_set_encode		ieee80211_wx_set_encode_rsl
+#define ieee80211_wx_get_encode		ieee80211_wx_get_encode_rsl
+#if WIRELESS_EXT >= 18
+#define ieee80211_wx_set_mlme		ieee80211_wx_set_mlme_rsl
+#define ieee80211_wx_set_auth		ieee80211_wx_set_auth_rsl
+#define ieee80211_wx_set_encode_ext	ieee80211_wx_set_encode_ext_rsl
+#define ieee80211_wx_get_encode_ext	ieee80211_wx_get_encode_ext_rsl
+#endif
+
+
+typedef struct ieee_param {
+	u32 cmd;
+	u8 sta_addr[ETH_ALEN];
+        union {
+		struct {
+			u8 name;
+			u32 value;
+		} wpa_param;
+		struct {
+			u32 len;
+			u8 reserved[32];
+			u8 data[0];
+		} wpa_ie;
+	        struct{
+			int command;
+    			int reason_code;
+		} mlme;
+		struct {
+			u8 alg[IEEE_CRYPT_ALG_NAME_LEN];
+			u8 set_tx;
+			u32 err;
+			u8 idx;
+			u8 seq[8]; /* sequence counter (set: RX, get: TX) */
+			u16 key_len;
+			u8 key[0];
+		} crypt;
+	} u;
+}ieee_param;
+
+
+#if WIRELESS_EXT < 17
+#define IW_QUAL_QUAL_INVALID   0x10
+#define IW_QUAL_LEVEL_INVALID  0x20
+#define IW_QUAL_NOISE_INVALID  0x40
+#define IW_QUAL_QUAL_UPDATED   0x1
+#define IW_QUAL_LEVEL_UPDATED  0x2
+#define IW_QUAL_NOISE_UPDATED  0x4
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
+static inline void tq_init(struct tq_struct * task, void(*func)(void *), void *data)
+{
+	task->routine = func;
+	task->data 	= data;
+	//task->next = NULL;
+	INIT_LIST_HEAD(&task->list);
+	task->sync = 0;
+}
+#endif
+
+// linux under 2.6.9 release may not support it, so modify it for common use
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,9))
+//#define MSECS(t)	(1000 * ((t) / HZ) + 1000 * ((t) % HZ) / HZ)
+#define MSECS(t)	(HZ * ((t) / 1000) + (HZ * ((t) % 1000)) / 1000)
+static inline unsigned long msleep_interruptible_rsl(unsigned int msecs)
+{
+         unsigned long timeout = MSECS(msecs) + 1;
+
+         while (timeout) {
+                 set_current_state(TASK_INTERRUPTIBLE);
+                 timeout = schedule_timeout(timeout);
+         }
+         return timeout;
+}
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,31))
+static inline void msleep(unsigned int msecs)
+{
+         unsigned long timeout = MSECS(msecs) + 1;
+
+         while (timeout) {
+                 set_current_state(TASK_UNINTERRUPTIBLE);
+                 timeout = schedule_timeout(timeout);
+         }
+}
+#endif
+#else
+#define MSECS(t) msecs_to_jiffies(t)
+#define msleep_interruptible_rsl  msleep_interruptible
+#endif
+
+#define IEEE80211_DATA_LEN		2304
+/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
+   6.2.1.1.2.
+
+   The figure in section 7.1.2 suggests a body size of up to 2312
+   bytes is allowed, which is a bit confusing, I suspect this
+   represents the 2304 bytes of real data, plus a possible 8 bytes of
+   WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
+#define IEEE80211_1ADDR_LEN 10
+#define IEEE80211_2ADDR_LEN 16
+#define IEEE80211_3ADDR_LEN 24
+#define IEEE80211_4ADDR_LEN 30
+#define IEEE80211_FCS_LEN    4
+#define IEEE80211_HLEN                  (IEEE80211_4ADDR_LEN)
+#define IEEE80211_FRAME_LEN             (IEEE80211_DATA_LEN + IEEE80211_HLEN)
+#define IEEE80211_MGMT_HDR_LEN 24
+#define IEEE80211_DATA_HDR3_LEN 24
+#define IEEE80211_DATA_HDR4_LEN 30
+
+#define MIN_FRAG_THRESHOLD     256U
+#define MAX_FRAG_THRESHOLD     2346U
+
+
+/* Frame control field constants */
+#define IEEE80211_FCTL_VERS		0x0003
+#define IEEE80211_FCTL_FTYPE		0x000c
+#define IEEE80211_FCTL_STYPE		0x00f0
+#define IEEE80211_FCTL_FRAMETYPE	0x00fc
+#define IEEE80211_FCTL_TODS		0x0100
+#define IEEE80211_FCTL_FROMDS		0x0200
+#define IEEE80211_FCTL_DSTODS		0x0300 //added by david
+#define IEEE80211_FCTL_MOREFRAGS	0x0400
+#define IEEE80211_FCTL_RETRY		0x0800
+#define IEEE80211_FCTL_PM		0x1000
+#define IEEE80211_FCTL_MOREDATA		0x2000
+#define IEEE80211_FCTL_WEP		0x4000
+#define IEEE80211_FCTL_ORDER		0x8000
+
+#define IEEE80211_FTYPE_MGMT		0x0000
+#define IEEE80211_FTYPE_CTL		0x0004
+#define IEEE80211_FTYPE_DATA		0x0008
+
+/* management */
+#define IEEE80211_STYPE_ASSOC_REQ	0x0000
+#define IEEE80211_STYPE_ASSOC_RESP 	0x0010
+#define IEEE80211_STYPE_REASSOC_REQ	0x0020
+#define IEEE80211_STYPE_REASSOC_RESP	0x0030
+#define IEEE80211_STYPE_PROBE_REQ	0x0040
+#define IEEE80211_STYPE_PROBE_RESP	0x0050
+#define IEEE80211_STYPE_BEACON		0x0080
+#define IEEE80211_STYPE_ATIM		0x0090
+#define IEEE80211_STYPE_DISASSOC	0x00A0
+#define IEEE80211_STYPE_AUTH		0x00B0
+#define IEEE80211_STYPE_DEAUTH		0x00C0
+#define IEEE80211_STYPE_MANAGE_ACT	0x00D0
+
+/* control */
+#define IEEE80211_STYPE_PSPOLL		0x00A0
+#define IEEE80211_STYPE_RTS		0x00B0
+#define IEEE80211_STYPE_CTS		0x00C0
+#define IEEE80211_STYPE_ACK		0x00D0
+#define IEEE80211_STYPE_CFEND		0x00E0
+#define IEEE80211_STYPE_CFENDACK	0x00F0
+#define IEEE80211_STYPE_BLOCKACK   0x0094
+
+/* data */
+#define IEEE80211_STYPE_DATA		0x0000
+#define IEEE80211_STYPE_DATA_CFACK	0x0010
+#define IEEE80211_STYPE_DATA_CFPOLL	0x0020
+#define IEEE80211_STYPE_DATA_CFACKPOLL	0x0030
+#define IEEE80211_STYPE_NULLFUNC	0x0040
+#define IEEE80211_STYPE_CFACK		0x0050
+#define IEEE80211_STYPE_CFPOLL		0x0060
+#define IEEE80211_STYPE_CFACKPOLL	0x0070
+#define IEEE80211_STYPE_QOS_DATA	0x0080 //added for WMM 2006/8/2
+#define IEEE80211_STYPE_QOS_NULL	0x00C0
+
+#define IEEE80211_SCTL_FRAG		0x000F
+#define IEEE80211_SCTL_SEQ		0xFFF0
+
+/* QOS control */
+#define IEEE80211_QCTL_TID              0x000F
+
+#define	FC_QOS_BIT					BIT7
+#define IsDataFrame(pdu)			( ((pdu[0] & 0x0C)==0x08) ? true : false )
+#define	IsLegacyDataFrame(pdu)	(IsDataFrame(pdu) && (!(pdu[0]&FC_QOS_BIT)) )
+//added by wb. Is this right?
+#define IsQoSDataFrame(pframe)  ((*(u16*)pframe&(IEEE80211_STYPE_QOS_DATA|IEEE80211_FTYPE_DATA)) == (IEEE80211_STYPE_QOS_DATA|IEEE80211_FTYPE_DATA))
+#define Frame_Order(pframe)     (*(u16*)pframe&IEEE80211_FCTL_ORDER)
+#define SN_LESS(a, b)		(((a-b)&0x800)!=0)
+#define SN_EQUAL(a, b)	(a == b)
+#define MAX_DEV_ADDR_SIZE 8
+typedef enum _ACT_CATEGORY{
+        ACT_CAT_QOS = 1,
+        ACT_CAT_DLS = 2,
+        ACT_CAT_BA  = 3,
+        ACT_CAT_HT  = 7,
+        ACT_CAT_WMM = 17,
+} ACT_CATEGORY, *PACT_CATEGORY;
+
+typedef enum _TS_ACTION{
+        ACT_ADDTSREQ = 0,
+        ACT_ADDTSRSP = 1,
+        ACT_DELTS    = 2,
+        ACT_SCHEDULE = 3,
+} TS_ACTION, *PTS_ACTION;
+
+typedef enum _BA_ACTION{
+        ACT_ADDBAREQ = 0,
+        ACT_ADDBARSP = 1,
+        ACT_DELBA    = 2,
+} BA_ACTION, *PBA_ACTION;
+
+typedef enum _InitialGainOpType{
+	IG_Backup=0,
+	IG_Restore,
+	IG_Max
+}InitialGainOpType;
+//added by amy for LED 090319
+//================================================================================
+// LED customization.
+//================================================================================
+typedef enum _LED_CTL_MODE{
+        LED_CTL_POWER_ON = 1,
+        LED_CTL_LINK = 2,
+        LED_CTL_NO_LINK = 3,
+        LED_CTL_TX = 4,
+        LED_CTL_RX = 5,
+        LED_CTL_SITE_SURVEY = 6,
+        LED_CTL_POWER_OFF = 7,
+        LED_CTL_START_TO_LINK = 8,
+        LED_CTL_START_WPS = 9,
+        LED_CTL_STOP_WPS = 10,
+        LED_CTL_START_WPS_BOTTON = 11, //added for runtop
+}LED_CTL_MODE;
+
+/* debug macros */
+#define CONFIG_IEEE80211_DEBUG
+#ifdef CONFIG_IEEE80211_DEBUG
+extern u32 ieee80211_debug_level;
+#define IEEE80211_DEBUG(level, fmt, args...) \
+do { if (ieee80211_debug_level & (level)) \
+  printk(KERN_DEBUG "ieee80211: " fmt, ## args); } while (0)
+//wb added to debug out data buf
+//if you want print DATA buffer related BA, please set ieee80211_debug_level to DATA|BA
+#define IEEE80211_DEBUG_DATA(level, data, datalen)	\
+	do{ if ((ieee80211_debug_level & (level)) == (level))	\
+		{ 	\
+			int i;					\
+			u8* pdata = (u8*) data;			\
+			printk(KERN_DEBUG "ieee80211: %s()\n", __FUNCTION__);	\
+			for(i=0; i<(int)(datalen); i++)			\
+			{						\
+				printk("%2x ", pdata[i]);		\
+				if ((i+1)%16 == 0) printk("\n");	\
+			}				\
+			printk("\n");			\
+		}					\
+	} while (0)
+#else
+#define IEEE80211_DEBUG(level, fmt, args...) do {} while (0)
+#define IEEE80211_DEBUG_DATA(level, data, datalen) do {} while(0)
+#endif	/* CONFIG_IEEE80211_DEBUG */
+
+/* debug macros not dependent on CONFIG_IEEE80211_DEBUG */
+
+#define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
+#define MAC_ARG(x) ((u8*)(x))[0],((u8*)(x))[1],((u8*)(x))[2],((u8*)(x))[3],((u8*)(x))[4],((u8*)(x))[5]
+
+/*
+ * To use the debug system;
+ *
+ * If you are defining a new debug classification, simply add it to the #define
+ * list here in the form of:
+ *
+ * #define IEEE80211_DL_xxxx VALUE
+ *
+ * shifting value to the left one bit from the previous entry.  xxxx should be
+ * the name of the classification (for example, WEP)
+ *
+ * You then need to either add a IEEE80211_xxxx_DEBUG() macro definition for your
+ * classification, or use IEEE80211_DEBUG(IEEE80211_DL_xxxx, ...) whenever you want
+ * to send output to that classification.
+ *
+ * To add your debug level to the list of levels seen when you perform
+ *
+ * % cat /proc/net/ipw/debug_level
+ *
+ * you simply need to add your entry to the ipw_debug_levels array.
+ *
+ * If you do not see debug_level in /proc/net/ipw then you do not have
+ * CONFIG_IEEE80211_DEBUG defined in your kernel configuration
+ *
+ */
+
+#define IEEE80211_DL_INFO          (1<<0)
+#define IEEE80211_DL_WX            (1<<1)
+#define IEEE80211_DL_SCAN          (1<<2)
+#define IEEE80211_DL_STATE         (1<<3)
+#define IEEE80211_DL_MGMT          (1<<4)
+#define IEEE80211_DL_FRAG          (1<<5)
+#define IEEE80211_DL_EAP           (1<<6)
+#define IEEE80211_DL_DROP          (1<<7)
+
+#define IEEE80211_DL_TX            (1<<8)
+#define IEEE80211_DL_RX            (1<<9)
+
+#define IEEE80211_DL_HT		   (1<<10)  //HT
+#define IEEE80211_DL_BA		   (1<<11)  //ba
+#define IEEE80211_DL_TS		   (1<<12)  //TS
+#define IEEE80211_DL_QOS           (1<<13)
+#define IEEE80211_DL_REORDER	   (1<<14)
+#define IEEE80211_DL_IOT	   (1<<15)
+#define IEEE80211_DL_IPS	   (1<<16)
+#define IEEE80211_DL_TRACE	   (1<<29)  //trace function, need to user net_ratelimit() together in order not to print too much to the screen
+#define IEEE80211_DL_DATA	   (1<<30)   //use this flag to control whether print data buf out.
+#define IEEE80211_DL_ERR	   (1<<31)   //always open
+#define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
+#define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
+#define IEEE80211_DEBUG_INFO(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
+
+#define IEEE80211_DEBUG_WX(f, a...)     IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a)
+#define IEEE80211_DEBUG_SCAN(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a)
+#define IEEE80211_DEBUG_STATE(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a)
+#define IEEE80211_DEBUG_MGMT(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a)
+#define IEEE80211_DEBUG_FRAG(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a)
+#define IEEE80211_DEBUG_EAP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a)
+#define IEEE80211_DEBUG_DROP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a)
+#define IEEE80211_DEBUG_TX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a)
+#define IEEE80211_DEBUG_RX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a)
+#define IEEE80211_DEBUG_QOS(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_QOS, f, ## a)
+
+#ifdef CONFIG_IEEE80211_DEBUG
+/* Added by Annie, 2005-11-22. */
+#define MAX_STR_LEN     64
+/* I want to see ASCII 33 to 126 only. Otherwise, I print '?'. Annie, 2005-11-22.*/
+#define PRINTABLE(_ch)  (_ch>'!' && _ch<'~')
+#define IEEE80211_PRINT_STR(_Comp, _TitleString, _Ptr, _Len)                            	\
+                        if((_Comp) & level)   							\
+                        {                                                                       \
+                                int             __i;                                            \
+                                u8  buffer[MAX_STR_LEN];                                    	\
+                                int length = (_Len<MAX_STR_LEN)? _Len : (MAX_STR_LEN-1) ;  	\
+                                memset(buffer, 0, MAX_STR_LEN);                      		\
+                                memcpy(buffer, (u8 *)_Ptr, length );            		\
+                                for( __i=0; __i<MAX_STR_LEN; __i++ )                            \
+                                {                                                               \
+                                     if( !PRINTABLE(buffer[__i]) )   buffer[__i] = '?';     	\
+                                }                                                               \
+                                buffer[length] = '\0';                                          \
+                                printk("Rtl819x: ");                                         	\
+                                printk(_TitleString);                                         \
+                                printk(": %d, <%s>\n", _Len, buffer);                         \
+                        }
+#else
+#define IEEE80211_PRINT_STR(_Comp, _TitleString, _Ptr, _Len)  do {} while (0)
+#endif
+
+#include <linux/netdevice.h>
+#include <linux/if_arp.h> /* ARPHRD_ETHER */
+
+#ifndef WIRELESS_SPY
+#define WIRELESS_SPY		// enable iwspy support
+#endif
+#include <net/iw_handler.h>	// new driver API
+
+#ifndef ETH_P_PAE
+#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
+#endif /* ETH_P_PAE */
+
+#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
+
+#ifndef ETH_P_80211_RAW
+#define ETH_P_80211_RAW (ETH_P_ECONET + 1)
+#endif
+
+/* IEEE 802.11 defines */
+
+#define P80211_OUI_LEN 3
+
+struct ieee80211_snap_hdr {
+
+        u8    dsap;   /* always 0xAA */
+        u8    ssap;   /* always 0xAA */
+        u8    ctrl;   /* always 0x03 */
+        u8    oui[P80211_OUI_LEN];    /* organizational universal id */
+
+} __attribute__ ((packed));
+
+#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
+
+#define WLAN_FC_GET_VERS(fc) ((fc) & IEEE80211_FCTL_VERS)
+#define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
+#define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
+
+#define WLAN_FC_GET_FRAMETYPE(fc) ((fc) & IEEE80211_FCTL_FRAMETYPE)
+#define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
+#define WLAN_GET_SEQ_SEQ(seq)  (((seq) & IEEE80211_SCTL_SEQ) >> 4)
+
+/* Authentication algorithms */
+#define WLAN_AUTH_OPEN 0
+#define WLAN_AUTH_SHARED_KEY 1
+#define WLAN_AUTH_LEAP 2
+
+#define WLAN_AUTH_CHALLENGE_LEN 128
+
+#define WLAN_CAPABILITY_BSS (1<<0)
+#define WLAN_CAPABILITY_IBSS (1<<1)
+#define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
+#define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
+#define WLAN_CAPABILITY_PRIVACY (1<<4)
+#define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5)
+#define WLAN_CAPABILITY_PBCC (1<<6)
+#define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7)
+#define WLAN_CAPABILITY_SPECTRUM_MGMT (1<<8)
+#define WLAN_CAPABILITY_QOS (1<<9)
+#define WLAN_CAPABILITY_SHORT_SLOT (1<<10)
+#define WLAN_CAPABILITY_DSSS_OFDM (1<<13)
+
+/* 802.11g ERP information element */
+#define WLAN_ERP_NON_ERP_PRESENT (1<<0)
+#define WLAN_ERP_USE_PROTECTION (1<<1)
+#define WLAN_ERP_BARKER_PREAMBLE (1<<2)
+
+/* Status codes */
+enum ieee80211_statuscode {
+        WLAN_STATUS_SUCCESS = 0,
+        WLAN_STATUS_UNSPECIFIED_FAILURE = 1,
+        WLAN_STATUS_CAPS_UNSUPPORTED = 10,
+        WLAN_STATUS_REASSOC_NO_ASSOC = 11,
+        WLAN_STATUS_ASSOC_DENIED_UNSPEC = 12,
+        WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG = 13,
+        WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION = 14,
+        WLAN_STATUS_CHALLENGE_FAIL = 15,
+        WLAN_STATUS_AUTH_TIMEOUT = 16,
+        WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA = 17,
+        WLAN_STATUS_ASSOC_DENIED_RATES = 18,
+        /* 802.11b */
+        WLAN_STATUS_ASSOC_DENIED_NOSHORTPREAMBLE = 19,
+        WLAN_STATUS_ASSOC_DENIED_NOPBCC = 20,
+        WLAN_STATUS_ASSOC_DENIED_NOAGILITY = 21,
+        /* 802.11h */
+        WLAN_STATUS_ASSOC_DENIED_NOSPECTRUM = 22,
+        WLAN_STATUS_ASSOC_REJECTED_BAD_POWER = 23,
+        WLAN_STATUS_ASSOC_REJECTED_BAD_SUPP_CHAN = 24,
+        /* 802.11g */
+        WLAN_STATUS_ASSOC_DENIED_NOSHORTTIME = 25,
+        WLAN_STATUS_ASSOC_DENIED_NODSSSOFDM = 26,
+        /* 802.11i */
+        WLAN_STATUS_INVALID_IE = 40,
+        WLAN_STATUS_INVALID_GROUP_CIPHER = 41,
+        WLAN_STATUS_INVALID_PAIRWISE_CIPHER = 42,
+        WLAN_STATUS_INVALID_AKMP = 43,
+        WLAN_STATUS_UNSUPP_RSN_VERSION = 44,
+        WLAN_STATUS_INVALID_RSN_IE_CAP = 45,
+        WLAN_STATUS_CIPHER_SUITE_REJECTED = 46,
+};
+
+/* Reason codes */
+enum ieee80211_reasoncode {
+        WLAN_REASON_UNSPECIFIED = 1,
+        WLAN_REASON_PREV_AUTH_NOT_VALID = 2,
+        WLAN_REASON_DEAUTH_LEAVING = 3,
+        WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY = 4,
+        WLAN_REASON_DISASSOC_AP_BUSY = 5,
+        WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA = 6,
+        WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA = 7,
+        WLAN_REASON_DISASSOC_STA_HAS_LEFT = 8,
+        WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH = 9,
+        /* 802.11h */
+        WLAN_REASON_DISASSOC_BAD_POWER = 10,
+        WLAN_REASON_DISASSOC_BAD_SUPP_CHAN = 11,
+        /* 802.11i */
+        WLAN_REASON_INVALID_IE = 13,
+        WLAN_REASON_MIC_FAILURE = 14,
+        WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT = 15,
+        WLAN_REASON_GROUP_KEY_HANDSHAKE_TIMEOUT = 16,
+        WLAN_REASON_IE_DIFFERENT = 17,
+        WLAN_REASON_INVALID_GROUP_CIPHER = 18,
+        WLAN_REASON_INVALID_PAIRWISE_CIPHER = 19,
+        WLAN_REASON_INVALID_AKMP = 20,
+        WLAN_REASON_UNSUPP_RSN_VERSION = 21,
+        WLAN_REASON_INVALID_RSN_IE_CAP = 22,
+        WLAN_REASON_IEEE8021X_FAILED = 23,
+        WLAN_REASON_CIPHER_SUITE_REJECTED = 24,
+};
+
+#define IEEE80211_STATMASK_SIGNAL (1<<0)
+#define IEEE80211_STATMASK_RSSI (1<<1)
+#define IEEE80211_STATMASK_NOISE (1<<2)
+#define IEEE80211_STATMASK_RATE (1<<3)
+#define IEEE80211_STATMASK_WEMASK 0x7
+
+#define IEEE80211_CCK_MODULATION    (1<<0)
+#define IEEE80211_OFDM_MODULATION   (1<<1)
+
+#define IEEE80211_24GHZ_BAND     (1<<0)
+#define IEEE80211_52GHZ_BAND     (1<<1)
+
+#define IEEE80211_CCK_RATE_LEN  		4
+#define IEEE80211_CCK_RATE_1MB		        0x02
+#define IEEE80211_CCK_RATE_2MB		        0x04
+#define IEEE80211_CCK_RATE_5MB		        0x0B
+#define IEEE80211_CCK_RATE_11MB		        0x16
+#define IEEE80211_OFDM_RATE_LEN 		8
+#define IEEE80211_OFDM_RATE_6MB		        0x0C
+#define IEEE80211_OFDM_RATE_9MB		        0x12
+#define IEEE80211_OFDM_RATE_12MB		0x18
+#define IEEE80211_OFDM_RATE_18MB		0x24
+#define IEEE80211_OFDM_RATE_24MB		0x30
+#define IEEE80211_OFDM_RATE_36MB		0x48
+#define IEEE80211_OFDM_RATE_48MB		0x60
+#define IEEE80211_OFDM_RATE_54MB		0x6C
+#define IEEE80211_BASIC_RATE_MASK		0x80
+
+#define IEEE80211_CCK_RATE_1MB_MASK		(1<<0)
+#define IEEE80211_CCK_RATE_2MB_MASK		(1<<1)
+#define IEEE80211_CCK_RATE_5MB_MASK		(1<<2)
+#define IEEE80211_CCK_RATE_11MB_MASK		(1<<3)
+#define IEEE80211_OFDM_RATE_6MB_MASK		(1<<4)
+#define IEEE80211_OFDM_RATE_9MB_MASK		(1<<5)
+#define IEEE80211_OFDM_RATE_12MB_MASK		(1<<6)
+#define IEEE80211_OFDM_RATE_18MB_MASK		(1<<7)
+#define IEEE80211_OFDM_RATE_24MB_MASK		(1<<8)
+#define IEEE80211_OFDM_RATE_36MB_MASK		(1<<9)
+#define IEEE80211_OFDM_RATE_48MB_MASK		(1<<10)
+#define IEEE80211_OFDM_RATE_54MB_MASK		(1<<11)
+
+#define IEEE80211_CCK_RATES_MASK	        0x0000000F
+#define IEEE80211_CCK_BASIC_RATES_MASK	(IEEE80211_CCK_RATE_1MB_MASK | \
+	IEEE80211_CCK_RATE_2MB_MASK)
+#define IEEE80211_CCK_DEFAULT_RATES_MASK	(IEEE80211_CCK_BASIC_RATES_MASK | \
+        IEEE80211_CCK_RATE_5MB_MASK | \
+        IEEE80211_CCK_RATE_11MB_MASK)
+
+#define IEEE80211_OFDM_RATES_MASK		0x00000FF0
+#define IEEE80211_OFDM_BASIC_RATES_MASK	(IEEE80211_OFDM_RATE_6MB_MASK | \
+	IEEE80211_OFDM_RATE_12MB_MASK | \
+	IEEE80211_OFDM_RATE_24MB_MASK)
+#define IEEE80211_OFDM_DEFAULT_RATES_MASK	(IEEE80211_OFDM_BASIC_RATES_MASK | \
+	IEEE80211_OFDM_RATE_9MB_MASK  | \
+	IEEE80211_OFDM_RATE_18MB_MASK | \
+	IEEE80211_OFDM_RATE_36MB_MASK | \
+	IEEE80211_OFDM_RATE_48MB_MASK | \
+	IEEE80211_OFDM_RATE_54MB_MASK)
+#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
+                                IEEE80211_CCK_DEFAULT_RATES_MASK)
+
+#define IEEE80211_NUM_OFDM_RATES	    8
+#define IEEE80211_NUM_CCK_RATES	            4
+#define IEEE80211_OFDM_SHIFT_MASK_A         4
+
+
+/* this is stolen and modified from the madwifi driver*/
+#define IEEE80211_FC0_TYPE_MASK		0x0c
+#define IEEE80211_FC0_TYPE_DATA		0x08
+#define IEEE80211_FC0_SUBTYPE_MASK	0xB0
+#define IEEE80211_FC0_SUBTYPE_QOS	0x80
+
+#define IEEE80211_QOS_HAS_SEQ(fc) \
+	(((fc) & (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == \
+	 (IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS))
+
+/* this is stolen from ipw2200 driver */
+#define IEEE_IBSS_MAC_HASH_SIZE 31
+struct ieee_ibss_seq {
+	u8 mac[ETH_ALEN];
+	u16 seq_num[17];
+	u16 frag_num[17];
+	unsigned long packet_time[17];
+	struct list_head list;
+};
+
+/* NOTE: This data is for statistical purposes; not all hardware provides this
+ *       information for frames received.  Not setting these will not cause
+ *       any adverse affects. */
+struct ieee80211_rx_stats {
+#if 1
+	u32 mac_time[2];
+	s8 rssi;
+	u8 signal;
+	u8 noise;
+	u16 rate; /* in 100 kbps */
+	u8 received_channel;
+	u8 control;
+	u8 mask;
+	u8 freq;
+	u16 len;
+	u64 tsf;
+	u32 beacon_time;
+	u8 nic_type;
+	u16       Length;
+	//      u8        DataRate;      // In 0.5 Mbps
+	u8        SignalQuality; // in 0-100 index.
+	s32       RecvSignalPower; // Real power in dBm for this packet, no beautification and aggregation.
+	s8        RxPower; // in dBm Translate from PWdB
+	u8        SignalStrength; // in 0-100 index.
+	u16       bHwError:1;
+	u16       bCRC:1;
+	u16       bICV:1;
+	u16       bShortPreamble:1;
+	u16       Antenna:1;      //for rtl8185
+	u16       Decrypted:1;    //for rtl8185, rtl8187
+	u16       Wakeup:1;       //for rtl8185
+	u16       Reserved0:1;    //for rtl8185
+	u8        AGC;
+	u32       TimeStampLow;
+	u32       TimeStampHigh;
+	bool      bShift;
+	bool      bIsQosData;             // Added by Annie, 2005-12-22.
+	u8        UserPriority;
+
+	//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
+	//1Attention Please!!!<11n or 8190 specific code should be put below this line>
+	//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
+	u8        RxDrvInfoSize;
+	u8        RxBufShift;
+	bool      bIsAMPDU;
+	bool      bFirstMPDU;
+	bool      bContainHTC;
+	bool      RxIs40MHzPacket;
+	u32       RxPWDBAll;
+	u8        RxMIMOSignalStrength[4];        // in 0~100 index
+	s8        RxMIMOSignalQuality[2];
+	bool      bPacketMatchBSSID;
+	bool      bIsCCK;
+	bool      bPacketToSelf;
+	//added by amy
+	u8*       virtual_address;
+	u16          packetlength;              // Total packet length: Must equal to sum of all FragLength
+	u16          fraglength;                        // FragLength should equal to PacketLength in non-fragment case
+	u16          fragoffset;                        // Data offset for this fragment
+	u16          ntotalfrag;
+	bool      	  bisrxaggrsubframe;
+	bool		  bPacketBeacon;	//cosa add for rssi
+	bool		  bToSelfBA;		//cosa add for rssi
+	char 	  cck_adc_pwdb[4];	//cosa add for rx path selection
+	u16		  Seq_Num;
+	u8		nTotalAggPkt;		// Number of aggregated packets.
+#endif
+
+};
+
+/* IEEE 802.11 requires that STA supports concurrent reception of at least
+ * three fragmented frames. This define can be increased to support more
+ * concurrent frames, but it should be noted that each entry can consume about
+ * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
+#define IEEE80211_FRAG_CACHE_LEN 4
+
+struct ieee80211_frag_entry {
+	unsigned long first_frag_time;
+	unsigned int seq;
+	unsigned int last_frag;
+	struct sk_buff *skb;
+	u8 src_addr[ETH_ALEN];
+	u8 dst_addr[ETH_ALEN];
+};
+
+struct ieee80211_stats {
+	unsigned int tx_unicast_frames;
+	unsigned int tx_multicast_frames;
+	unsigned int tx_fragments;
+	unsigned int tx_unicast_octets;
+	unsigned int tx_multicast_octets;
+	unsigned int tx_deferred_transmissions;
+	unsigned int tx_single_retry_frames;
+	unsigned int tx_multiple_retry_frames;
+	unsigned int tx_retry_limit_exceeded;
+	unsigned int tx_discards;
+	unsigned int rx_unicast_frames;
+	unsigned int rx_multicast_frames;
+	unsigned int rx_fragments;
+	unsigned int rx_unicast_octets;
+	unsigned int rx_multicast_octets;
+	unsigned int rx_fcs_errors;
+	unsigned int rx_discards_no_buffer;
+	unsigned int tx_discards_wrong_sa;
+	unsigned int rx_discards_undecryptable;
+	unsigned int rx_message_in_msg_fragments;
+	unsigned int rx_message_in_bad_msg_fragments;
+};
+
+struct ieee80211_device;
+
+#include "ieee80211_crypt.h"
+
+#define SEC_KEY_1         (1<<0)
+#define SEC_KEY_2         (1<<1)
+#define SEC_KEY_3         (1<<2)
+#define SEC_KEY_4         (1<<3)
+#define SEC_ACTIVE_KEY    (1<<4)
+#define SEC_AUTH_MODE     (1<<5)
+#define SEC_UNICAST_GROUP (1<<6)
+#define SEC_LEVEL         (1<<7)
+#define SEC_ENABLED       (1<<8)
+#define SEC_ENCRYPT       (1<<9)
+
+#define SEC_LEVEL_0      0 /* None */
+#define SEC_LEVEL_1      1 /* WEP 40 and 104 bit */
+#define SEC_LEVEL_2      2 /* Level 1 + TKIP */
+#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
+#define SEC_LEVEL_3      4 /* Level 2 + CCMP */
+
+#define SEC_ALG_NONE            0
+#define SEC_ALG_WEP             1
+#define SEC_ALG_TKIP            2
+#define SEC_ALG_CCMP            3
+
+#define WEP_KEYS 		4
+#define WEP_KEY_LEN		13
+#define SCM_KEY_LEN             32
+#define SCM_TEMPORAL_KEY_LENGTH 16
+
+struct ieee80211_security {
+	u16 active_key:2,
+            enabled:1,
+	    auth_mode:2,
+            auth_algo:4,
+            unicast_uses_group:1,
+	    encrypt:1;
+	u8 key_sizes[WEP_KEYS];
+	u8 keys[WEP_KEYS][SCM_KEY_LEN];
+	u8 level;
+	u16 flags;
+} __attribute__ ((packed));
+
+
+/*
+ 802.11 data frame from AP
+      ,-------------------------------------------------------------------.
+Bytes |  2   |  2   |    6    |    6    |    6    |  2   | 0..2312 |   4  |
+      |------|------|---------|---------|---------|------|---------|------|
+Desc. | ctrl | dura |  DA/RA  |   TA    |    SA   | Sequ |  frame  |  fcs |
+      |      | tion | (BSSID) |         |         | ence |  data   |      |
+      `-------------------------------------------------------------------'
+Total: 28-2340 bytes
+*/
+
+/* Management Frame Information Element Types */
+enum ieee80211_mfie {
+        MFIE_TYPE_SSID = 0,
+        MFIE_TYPE_RATES = 1,
+        MFIE_TYPE_FH_SET = 2,
+        MFIE_TYPE_DS_SET = 3,
+        MFIE_TYPE_CF_SET = 4,
+        MFIE_TYPE_TIM = 5,
+        MFIE_TYPE_IBSS_SET = 6,
+        MFIE_TYPE_COUNTRY = 7,
+        MFIE_TYPE_HOP_PARAMS = 8,
+        MFIE_TYPE_HOP_TABLE = 9,
+        MFIE_TYPE_REQUEST = 10,
+        MFIE_TYPE_CHALLENGE = 16,
+        MFIE_TYPE_POWER_CONSTRAINT = 32,
+        MFIE_TYPE_POWER_CAPABILITY = 33,
+        MFIE_TYPE_TPC_REQUEST = 34,
+        MFIE_TYPE_TPC_REPORT = 35,
+        MFIE_TYPE_SUPP_CHANNELS = 36,
+        MFIE_TYPE_CSA = 37,
+        MFIE_TYPE_MEASURE_REQUEST = 38,
+        MFIE_TYPE_MEASURE_REPORT = 39,
+        MFIE_TYPE_QUIET = 40,
+        MFIE_TYPE_IBSS_DFS = 41,
+        MFIE_TYPE_ERP = 42,
+        MFIE_TYPE_RSN = 48,
+        MFIE_TYPE_RATES_EX = 50,
+        MFIE_TYPE_HT_CAP= 45,
+	 MFIE_TYPE_HT_INFO= 61,
+	 MFIE_TYPE_AIRONET=133,
+        MFIE_TYPE_GENERIC = 221,
+        MFIE_TYPE_QOS_PARAMETER = 222,
+};
+
+/* Minimal header; can be used for passing 802.11 frames with sufficient
+ * information to determine what type of underlying data type is actually
+ * stored in the data. */
+struct ieee80211_hdr {
+        __le16 frame_ctl;
+        __le16 duration_id;
+        u8 payload[0];
+} __attribute__ ((packed));
+
+struct ieee80211_hdr_1addr {
+        __le16 frame_ctl;
+        __le16 duration_id;
+        u8 addr1[ETH_ALEN];
+        u8 payload[0];
+} __attribute__ ((packed));
+
+struct ieee80211_hdr_2addr {
+        __le16 frame_ctl;
+        __le16 duration_id;
+        u8 addr1[ETH_ALEN];
+        u8 addr2[ETH_ALEN];
+        u8 payload[0];
+} __attribute__ ((packed));
+
+struct ieee80211_hdr_3addr {
+	__le16 frame_ctl;
+	__le16 duration_id;
+	u8 addr1[ETH_ALEN];
+	u8 addr2[ETH_ALEN];
+	u8 addr3[ETH_ALEN];
+	__le16 seq_ctl;
+        u8 payload[0];
+} __attribute__ ((packed));
+
+struct ieee80211_hdr_4addr {
+	__le16 frame_ctl;
+	__le16 duration_id;
+	u8 addr1[ETH_ALEN];
+	u8 addr2[ETH_ALEN];
+	u8 addr3[ETH_ALEN];
+	__le16 seq_ctl;
+	u8 addr4[ETH_ALEN];
+        u8 payload[0];
+} __attribute__ ((packed));
+
+struct ieee80211_hdr_3addrqos {
+	__le16 frame_ctl;
+	__le16 duration_id;
+	u8 addr1[ETH_ALEN];
+	u8 addr2[ETH_ALEN];
+	u8 addr3[ETH_ALEN];
+	__le16 seq_ctl;
+        u8 payload[0];
+	__le16 qos_ctl;
+} __attribute__ ((packed));
+
+struct ieee80211_hdr_4addrqos {
+	__le16 frame_ctl;
+	__le16 duration_id;
+	u8 addr1[ETH_ALEN];
+	u8 addr2[ETH_ALEN];
+	u8 addr3[ETH_ALEN];
+	__le16 seq_ctl;
+	u8 addr4[ETH_ALEN];
+        u8 payload[0];
+	__le16 qos_ctl;
+} __attribute__ ((packed));
+
+struct ieee80211_info_element {
+	u8 id;
+	u8 len;
+	u8 data[0];
+} __attribute__ ((packed));
+
+struct ieee80211_authentication {
+	struct ieee80211_hdr_3addr header;
+	__le16 algorithm;
+	__le16 transaction;
+	__le16 status;
+	/*challenge*/
+	struct ieee80211_info_element info_element[0];
+} __attribute__ ((packed));
+
+struct ieee80211_disassoc {
+        struct ieee80211_hdr_3addr header;
+        __le16 reason;
+} __attribute__ ((packed));
+
+struct ieee80211_probe_request {
+	struct ieee80211_hdr_3addr header;
+	/* SSID, supported rates */
+        struct ieee80211_info_element info_element[0];
+} __attribute__ ((packed));
+
+struct ieee80211_probe_response {
+	struct ieee80211_hdr_3addr header;
+	u32 time_stamp[2];
+	__le16 beacon_interval;
+	__le16 capability;
+        /* SSID, supported rates, FH params, DS params,
+         * CF params, IBSS params, TIM (if beacon), RSN */
+        struct ieee80211_info_element info_element[0];
+} __attribute__ ((packed));
+
+/* Alias beacon for probe_response */
+#define ieee80211_beacon ieee80211_probe_response
+
+struct ieee80211_assoc_request_frame {
+	struct ieee80211_hdr_3addr header;
+	__le16 capability;
+	__le16 listen_interval;
+	/* SSID, supported rates, RSN */
+        struct ieee80211_info_element info_element[0];
+} __attribute__ ((packed));
+
+struct ieee80211_reassoc_request_frame {
+	struct ieee80211_hdr_3addr header;
+	__le16 capability;
+	__le16 listen_interval;
+	u8 current_ap[ETH_ALEN];
+	/* SSID, supported rates, RSN */
+        struct ieee80211_info_element info_element[0];
+} __attribute__ ((packed));
+
+struct ieee80211_assoc_response_frame {
+	struct ieee80211_hdr_3addr header;
+	__le16 capability;
+	__le16 status;
+	__le16 aid;
+	struct ieee80211_info_element info_element[0]; /* supported rates */
+} __attribute__ ((packed));
+
+struct ieee80211_txb {
+	u8 nr_frags;
+	u8 encrypted;
+	u8 queue_index;
+	u8 rts_included;
+	u16 reserved;
+	__le16 frag_size;
+	__le16 payload_size;
+	struct sk_buff *fragments[0];
+};
+
+#define MAX_TX_AGG_COUNT		  16
+struct ieee80211_drv_agg_txb {
+	u8 nr_drv_agg_frames;
+	struct sk_buff *tx_agg_frames[MAX_TX_AGG_COUNT];
+}__attribute__((packed));
+
+#define MAX_SUBFRAME_COUNT 		  64
+struct ieee80211_rxb {
+	u8 nr_subframes;
+	struct sk_buff *subframes[MAX_SUBFRAME_COUNT];
+	u8 dst[ETH_ALEN];
+	u8 src[ETH_ALEN];
+}__attribute__((packed));
+
+typedef union _frameqos {
+	u16 shortdata;
+	u8  chardata[2];
+	struct {
+		u16 tid:4;
+		u16 eosp:1;
+		u16 ack_policy:2;
+		u16 reserved:1;
+		u16 txop:8;
+	}field;
+}frameqos,*pframeqos;
+
+/* SWEEP TABLE ENTRIES NUMBER*/
+#define MAX_SWEEP_TAB_ENTRIES		  42
+#define MAX_SWEEP_TAB_ENTRIES_PER_PACKET  7
+/* MAX_RATES_LENGTH needs to be 12.  The spec says 8, and many APs
+ * only use 8, and then use extended rates for the remaining supported
+ * rates.  Other APs, however, stick all of their supported rates on the
+ * main rates information element... */
+#define MAX_RATES_LENGTH                  ((u8)12)
+#define MAX_RATES_EX_LENGTH               ((u8)16)
+#define MAX_NETWORK_COUNT                  128
+
+#define MAX_CHANNEL_NUMBER                 161
+#define IEEE80211_SOFTMAC_SCAN_TIME	   100
+//(HZ / 2)
+#define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2)
+
+#define CRC_LENGTH                 4U
+
+#define MAX_WPA_IE_LEN 64
+
+#define NETWORK_EMPTY_ESSID (1<<0)
+#define NETWORK_HAS_OFDM    (1<<1)
+#define NETWORK_HAS_CCK     (1<<2)
+
+/* QoS structure */
+#define NETWORK_HAS_QOS_PARAMETERS      (1<<3)
+#define NETWORK_HAS_QOS_INFORMATION     (1<<4)
+#define NETWORK_HAS_QOS_MASK            (NETWORK_HAS_QOS_PARAMETERS | \
+                                         NETWORK_HAS_QOS_INFORMATION)
+/* 802.11h */
+#define NETWORK_HAS_POWER_CONSTRAINT    (1<<5)
+#define NETWORK_HAS_CSA                 (1<<6)
+#define NETWORK_HAS_QUIET               (1<<7)
+#define NETWORK_HAS_IBSS_DFS            (1<<8)
+#define NETWORK_HAS_TPC_REPORT          (1<<9)
+
+#define NETWORK_HAS_ERP_VALUE           (1<<10)
+
+#define QOS_QUEUE_NUM                   4
+#define QOS_OUI_LEN                     3
+#define QOS_OUI_TYPE                    2
+#define QOS_ELEMENT_ID                  221
+#define QOS_OUI_INFO_SUB_TYPE           0
+#define QOS_OUI_PARAM_SUB_TYPE          1
+#define QOS_VERSION_1                   1
+#define QOS_AIFSN_MIN_VALUE             2
+#if 1
+struct ieee80211_qos_information_element {
+        u8 elementID;
+        u8 length;
+        u8 qui[QOS_OUI_LEN];
+        u8 qui_type;
+        u8 qui_subtype;
+        u8 version;
+        u8 ac_info;
+} __attribute__ ((packed));
+
+struct ieee80211_qos_ac_parameter {
+        u8 aci_aifsn;
+        u8 ecw_min_max;
+        __le16 tx_op_limit;
+} __attribute__ ((packed));
+
+struct ieee80211_qos_parameter_info {
+        struct ieee80211_qos_information_element info_element;
+        u8 reserved;
+        struct ieee80211_qos_ac_parameter ac_params_record[QOS_QUEUE_NUM];
+} __attribute__ ((packed));
+
+struct ieee80211_qos_parameters {
+        __le16 cw_min[QOS_QUEUE_NUM];
+        __le16 cw_max[QOS_QUEUE_NUM];
+        u8 aifs[QOS_QUEUE_NUM];
+        u8 flag[QOS_QUEUE_NUM];
+        __le16 tx_op_limit[QOS_QUEUE_NUM];
+} __attribute__ ((packed));
+
+struct ieee80211_qos_data {
+        struct ieee80211_qos_parameters parameters;
+        int active;
+        int supported;
+        u8 param_count;
+        u8 old_param_count;
+};
+
+struct ieee80211_tim_parameters {
+        u8 tim_count;
+        u8 tim_period;
+} __attribute__ ((packed));
+
+//#else
+struct ieee80211_wmm_ac_param {
+	u8 ac_aci_acm_aifsn;
+	u8 ac_ecwmin_ecwmax;
+	u16 ac_txop_limit;
+};
+
+struct ieee80211_wmm_ts_info {
+	u8 ac_dir_tid;
+	u8 ac_up_psb;
+	u8 reserved;
+} __attribute__ ((packed));
+
+struct ieee80211_wmm_tspec_elem {
+	struct ieee80211_wmm_ts_info ts_info;
+	u16 norm_msdu_size;
+	u16 max_msdu_size;
+	u32 min_serv_inter;
+	u32 max_serv_inter;
+	u32 inact_inter;
+	u32 suspen_inter;
+	u32 serv_start_time;
+	u32 min_data_rate;
+	u32 mean_data_rate;
+	u32 peak_data_rate;
+	u32 max_burst_size;
+	u32 delay_bound;
+	u32 min_phy_rate;
+	u16 surp_band_allow;
+	u16 medium_time;
+}__attribute__((packed));
+#endif
+enum eap_type {
+	EAP_PACKET = 0,
+	EAPOL_START,
+	EAPOL_LOGOFF,
+	EAPOL_KEY,
+	EAPOL_ENCAP_ASF_ALERT
+};
+
+static const char *eap_types[] = {
+	[EAP_PACKET]		= "EAP-Packet",
+	[EAPOL_START]		= "EAPOL-Start",
+	[EAPOL_LOGOFF]		= "EAPOL-Logoff",
+	[EAPOL_KEY]		= "EAPOL-Key",
+	[EAPOL_ENCAP_ASF_ALERT]	= "EAPOL-Encap-ASF-Alert"
+};
+
+static inline const char *eap_get_type(int type)
+{
+	return ((u32)type >= ARRAY_SIZE(eap_types)) ? "Unknown" : eap_types[type];
+}
+//added by amy for reorder
+static inline u8 Frame_QoSTID(u8* buf)
+{
+	struct ieee80211_hdr_3addr *hdr;
+	u16 fc;
+	hdr = (struct ieee80211_hdr_3addr *)buf;
+	fc = le16_to_cpu(hdr->frame_ctl);
+	return (u8)((frameqos*)(buf + (((fc & IEEE80211_FCTL_TODS)&&(fc & IEEE80211_FCTL_FROMDS))? 30 : 24)))->field.tid;
+}
+
+//added by amy for reorder
+
+struct eapol {
+	u8 snap[6];
+	u16 ethertype;
+	u8 version;
+	u8 type;
+	u16 length;
+} __attribute__ ((packed));
+
+struct ieee80211_softmac_stats{
+	unsigned int rx_ass_ok;
+	unsigned int rx_ass_err;
+	unsigned int rx_probe_rq;
+	unsigned int tx_probe_rs;
+	unsigned int tx_beacons;
+	unsigned int rx_auth_rq;
+	unsigned int rx_auth_rs_ok;
+	unsigned int rx_auth_rs_err;
+	unsigned int tx_auth_rq;
+	unsigned int no_auth_rs;
+	unsigned int no_ass_rs;
+	unsigned int tx_ass_rq;
+	unsigned int rx_ass_rq;
+	unsigned int tx_probe_rq;
+	unsigned int reassoc;
+	unsigned int swtxstop;
+	unsigned int swtxawake;
+	unsigned char CurrentShowTxate;
+	unsigned char last_packet_rate;
+	unsigned int txretrycount;
+};
+
+#define BEACON_PROBE_SSID_ID_POSITION 12
+
+struct ieee80211_info_element_hdr {
+	u8 id;
+	u8 len;
+} __attribute__ ((packed));
+
+/*
+ * These are the data types that can make up management packets
+ *
+	u16 auth_algorithm;
+	u16 auth_sequence;
+	u16 beacon_interval;
+	u16 capability;
+	u8 current_ap[ETH_ALEN];
+	u16 listen_interval;
+	struct {
+		u16 association_id:14, reserved:2;
+	} __attribute__ ((packed));
+	u32 time_stamp[2];
+	u16 reason;
+	u16 status;
+*/
+
+#define IEEE80211_DEFAULT_TX_ESSID "Penguin"
+#define IEEE80211_DEFAULT_BASIC_RATE 2 //1Mbps
+
+enum {WMM_all_frame, WMM_two_frame, WMM_four_frame, WMM_six_frame};
+#define MAX_SP_Len  (WMM_all_frame << 4)
+#define IEEE80211_QOS_TID 0x0f
+#define QOS_CTL_NOTCONTAIN_ACK (0x01 << 5)
+
+#define IEEE80211_DTIM_MBCAST 4
+#define IEEE80211_DTIM_UCAST 2
+#define IEEE80211_DTIM_VALID 1
+#define IEEE80211_DTIM_INVALID 0
+
+#define IEEE80211_PS_DISABLED 0
+#define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST
+#define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST
+
+//added by David for QoS 2006/6/30
+//#define WMM_Hang_8187
+#ifdef WMM_Hang_8187
+#undef WMM_Hang_8187
+#endif
+
+#define WME_AC_BK   0x00
+#define WME_AC_BE   0x01
+#define WME_AC_VI   0x02
+#define WME_AC_VO   0x03
+#define WME_ACI_MASK 0x03
+#define WME_AIFSN_MASK 0x03
+#define WME_AC_PRAM_LEN 16
+
+#define MAX_RECEIVE_BUFFER_SIZE 9100
+
+//UP Mapping to AC, using in MgntQuery_SequenceNumber() and maybe for DSCP
+//#define UP2AC(up)	((up<3) ? ((up==0)?1:0) : (up>>1))
+#if 1
+#define UP2AC(up) (		   \
+	((up) < 1) ? WME_AC_BE : \
+	((up) < 3) ? WME_AC_BK : \
+	((up) < 4) ? WME_AC_BE : \
+	((up) < 6) ? WME_AC_VI : \
+	WME_AC_VO)
+#endif
+//AC Mapping to UP, using in Tx part for selecting the corresponding TX queue
+#define AC2UP(_ac)	(       \
+	((_ac) == WME_AC_VO) ? 6 : \
+	((_ac) == WME_AC_VI) ? 5 : \
+	((_ac) == WME_AC_BK) ? 1 : \
+	0)
+
+#define	ETHER_ADDR_LEN		6	/* length of an Ethernet address */
+#define ETHERNET_HEADER_SIZE    14      /* length of two Ethernet address plus ether type*/
+
+struct	ether_header {
+	u8 ether_dhost[ETHER_ADDR_LEN];
+	u8 ether_shost[ETHER_ADDR_LEN];
+	u16 ether_type;
+} __attribute__((packed));
+
+#ifndef ETHERTYPE_PAE
+#define	ETHERTYPE_PAE	0x888e		/* EAPOL PAE/802.1x */
+#endif
+#ifndef ETHERTYPE_IP
+#define	ETHERTYPE_IP	0x0800		/* IP protocol */
+#endif
+
+typedef struct _bss_ht{
+
+	bool				support_ht;
+
+	// HT related elements
+	u8					ht_cap_buf[32];
+	u16					ht_cap_len;
+	u8					ht_info_buf[32];
+	u16					ht_info_len;
+
+	HT_SPEC_VER			ht_spec_ver;
+	//HT_CAPABILITY_ELE			bdHTCapEle;
+	//HT_INFORMATION_ELE		bdHTInfoEle;
+
+	bool				aggregation;
+	bool				long_slot_time;
+}bss_ht, *pbss_ht;
+
+typedef enum _erp_t{
+	ERP_NonERPpresent	= 0x01,
+	ERP_UseProtection	= 0x02,
+	ERP_BarkerPreambleMode = 0x04,
+} erp_t;
+
+
+struct ieee80211_network {
+	/* These entries are used to identify a unique network */
+	u8 bssid[ETH_ALEN];
+	u8 channel;
+	/* Ensure null-terminated for any debug msgs */
+	u8 ssid[IW_ESSID_MAX_SIZE + 1];
+	u8 ssid_len;
+#if 1
+        struct ieee80211_qos_data qos_data;
+#else
+       // Qos related. Added by Annie, 2005-11-01.
+        BSS_QOS   BssQos;
+#endif
+
+	//added by amy for LEAP
+	bool	bWithAironetIE;
+	bool	bCkipSupported;
+	bool	bCcxRmEnable;
+	u16 	CcxRmState[2];
+	// CCXv4 S59, MBSSID.
+	bool	bMBssidValid;
+	u8	MBssidMask;
+	u8	MBssid[6];
+	// CCX 2 S38, WLAN Device Version Number element. Annie, 2006-08-20.
+	bool	bWithCcxVerNum;
+	u8	BssCcxVerNumber;
+	/* These are network statistics */
+	struct ieee80211_rx_stats stats;
+	u16 capability;
+	u8  rates[MAX_RATES_LENGTH];
+	u8  rates_len;
+	u8  rates_ex[MAX_RATES_EX_LENGTH];
+	u8  rates_ex_len;
+	unsigned long last_scanned;
+	u8  mode;
+	u32 flags;
+	u32 last_associate;
+	u32 time_stamp[2];
+	u16 beacon_interval;
+	u16 listen_interval;
+	u16 atim_window;
+	u8  erp_value;
+	u8  wpa_ie[MAX_WPA_IE_LEN];
+	size_t wpa_ie_len;
+	u8  rsn_ie[MAX_WPA_IE_LEN];
+	size_t rsn_ie_len;
+
+        struct ieee80211_tim_parameters tim;
+	u8  dtim_period;
+	u8  dtim_data;
+	u32 last_dtim_sta_time[2];
+
+        //appeded for QoS
+        u8 wmm_info;
+        struct ieee80211_wmm_ac_param wmm_param[4];
+        u8 QoS_Enable;
+#ifdef THOMAS_TURBO
+	u8 Turbo_Enable;//enable turbo mode, added by thomas
+#endif
+#ifdef ENABLE_DOT11D
+	u16 CountryIeLen;
+	u8 CountryIeBuf[MAX_IE_LEN];
+#endif
+        // HT Related, by amy, 2008.04.29
+	BSS_HT	bssht;
+	// Add to handle broadcom AP management frame CCK rate.
+	bool broadcom_cap_exist;
+	bool realtek_cap_exit;
+	bool marvell_cap_exist;
+	bool ralink_cap_exist;
+	bool atheros_cap_exist;
+	bool cisco_cap_exist;
+	bool unknown_cap_exist;
+//	u8	berp_info;
+	bool	berp_info_valid;
+	bool buseprotection;
+	//put at the end of the structure.
+	struct list_head list;
+};
+
+#if 1
+enum ieee80211_state {
+
+	/* the card is not linked at all */
+	IEEE80211_NOLINK = 0,
+
+	/* IEEE80211_ASSOCIATING* are for BSS client mode
+	 * the driver shall not perform RX filtering unless
+	 * the state is LINKED.
+	 * The driver shall just check for the state LINKED and
+	 * defaults to NOLINK for ALL the other states (including
+	 * LINKED_SCANNING)
+	 */
+
+	/* the association procedure will start (wq scheduling)*/
+	IEEE80211_ASSOCIATING,
+	IEEE80211_ASSOCIATING_RETRY,
+
+	/* the association procedure is sending AUTH request*/
+	IEEE80211_ASSOCIATING_AUTHENTICATING,
+
+	/* the association procedure has successfully authentcated
+	 * and is sending association request
+	 */
+	IEEE80211_ASSOCIATING_AUTHENTICATED,
+
+	/* the link is ok. the card associated to a BSS or linked
+	 * to a ibss cell or acting as an AP and creating the bss
+	 */
+	IEEE80211_LINKED,
+
+	/* same as LINKED, but the driver shall apply RX filter
+	 * rules as we are in NO_LINK mode. As the card is still
+	 * logically linked, but it is doing a syncro site survey
+	 * then it will be back to LINKED state.
+	 */
+	IEEE80211_LINKED_SCANNING,
+
+};
+#else
+enum ieee80211_state {
+        IEEE80211_UNINITIALIZED = 0,
+        IEEE80211_INITIALIZED,
+        IEEE80211_ASSOCIATING,
+        IEEE80211_ASSOCIATED,
+        IEEE80211_AUTHENTICATING,
+        IEEE80211_AUTHENTICATED,
+        IEEE80211_SHUTDOWN
+};
+#endif
+
+#define DEFAULT_MAX_SCAN_AGE (15 * HZ)
+#define DEFAULT_FTS 2346
+
+#define CFG_IEEE80211_RESERVE_FCS (1<<0)
+#define CFG_IEEE80211_COMPUTE_FCS (1<<1)
+#define CFG_IEEE80211_RTS (1<<2)
+
+#define IEEE80211_24GHZ_MIN_CHANNEL 1
+#define IEEE80211_24GHZ_MAX_CHANNEL 14
+#define IEEE80211_24GHZ_CHANNELS (IEEE80211_24GHZ_MAX_CHANNEL - \
+                                  IEEE80211_24GHZ_MIN_CHANNEL + 1)
+
+#define IEEE80211_52GHZ_MIN_CHANNEL 34
+#define IEEE80211_52GHZ_MAX_CHANNEL 165
+#define IEEE80211_52GHZ_CHANNELS (IEEE80211_52GHZ_MAX_CHANNEL - \
+                                  IEEE80211_52GHZ_MIN_CHANNEL + 1)
+
+#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,11))
+extern inline int is_multicast_ether_addr(const u8 *addr)
+{
+        return ((addr[0] != 0xff) && (0x01 & addr[0]));
+}
+#endif
+
+#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,13))
+extern inline int is_broadcast_ether_addr(const u8 *addr)
+{
+	return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) &&   \
+		(addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
+}
+#endif
+
+typedef struct tx_pending_t{
+	int frag;
+	struct ieee80211_txb *txb;
+}tx_pending_t;
+
+typedef struct _bandwidth_autoswitch
+{
+	long threshold_20Mhzto40Mhz;
+	long	threshold_40Mhzto20Mhz;
+	bool bforced_tx20Mhz;
+	bool bautoswitch_enable;
+}bandwidth_autoswitch,*pbandwidth_autoswitch;
+
+
+//added by amy for order
+
+#define REORDER_WIN_SIZE	128
+#define REORDER_ENTRY_NUM	128
+typedef struct _RX_REORDER_ENTRY
+{
+	struct list_head	List;
+	u16			SeqNum;
+	struct ieee80211_rxb* prxb;
+} RX_REORDER_ENTRY, *PRX_REORDER_ENTRY;
+//added by amy for order
+typedef enum _Fsync_State{
+	Default_Fsync,
+	HW_Fsync,
+	SW_Fsync
+}Fsync_State;
+
+// Power save mode configured.
+typedef	enum _RT_PS_MODE
+{
+	eActive,	// Active/Continuous access.
+	eMaxPs,		// Max power save mode.
+	eFastPs		// Fast power save mode.
+}RT_PS_MODE;
+
+typedef enum _IPS_CALLBACK_FUNCION
+{
+	IPS_CALLBACK_NONE = 0,
+	IPS_CALLBACK_MGNT_LINK_REQUEST = 1,
+	IPS_CALLBACK_JOIN_REQUEST = 2,
+}IPS_CALLBACK_FUNCION;
+
+typedef enum _RT_JOIN_ACTION{
+	RT_JOIN_INFRA   = 1,
+	RT_JOIN_IBSS  = 2,
+	RT_START_IBSS = 3,
+	RT_NO_ACTION  = 4,
+}RT_JOIN_ACTION;
+
+typedef struct _IbssParms{
+	u16   atimWin;
+}IbssParms, *PIbssParms;
+#define MAX_NUM_RATES	264 // Max num of support rates element: 8,  Max num of ext. support rate: 255. 061122, by rcnjko.
+
+// RF state.
+typedef	enum _RT_RF_POWER_STATE
+{
+	eRfOn,
+	eRfSleep,
+	eRfOff
+}RT_RF_POWER_STATE;
+
+typedef struct _RT_POWER_SAVE_CONTROL
+{
+
+	//
+	// Inactive Power Save(IPS) : Disable RF when disconnected
+	//
+	bool				bInactivePs;
+	bool				bIPSModeBackup;
+	bool				bHaltAdapterClkRQ;
+	bool				bSwRfProcessing;
+	RT_RF_POWER_STATE	eInactivePowerState;
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	struct work_struct 	InactivePsWorkItem;
+#else
+	struct tq_struct	InactivePsWorkItem;
+#endif
+	struct timer_list	InactivePsTimer;
+
+	// Return point for join action
+	IPS_CALLBACK_FUNCION	ReturnPoint;
+
+	// Recored Parameters for rescheduled JoinRequest
+	bool				bTmpBssDesc;
+	RT_JOIN_ACTION		tmpJoinAction;
+	struct ieee80211_network tmpBssDesc;
+
+	// Recored Parameters for rescheduled MgntLinkRequest
+	bool				bTmpScanOnly;
+	bool				bTmpActiveScan;
+	bool				bTmpFilterHiddenAP;
+	bool				bTmpUpdateParms;
+	u8					tmpSsidBuf[33];
+	OCTET_STRING			tmpSsid2Scan;
+	bool				bTmpSsid2Scan;
+	u8					tmpNetworkType;
+	u8					tmpChannelNumber;
+	u16					tmpBcnPeriod;
+	u8					tmpDtimPeriod;
+	u16					tmpmCap;
+	OCTET_STRING			tmpSuppRateSet;
+	u8					tmpSuppRateBuf[MAX_NUM_RATES];
+	bool				bTmpSuppRate;
+	IbssParms				tmpIbpm;
+	bool				bTmpIbpm;
+
+	//
+	// Leisre Poswer Save : Disable RF if connected but traffic is not busy
+	//
+	bool				bLeisurePs;
+	u32				PowerProfile;
+	u8				LpsIdleCount;
+	u8				RegMaxLPSAwakeIntvl;
+	u8				LPSAwakeIntvl;
+
+	//RF OFF Level
+	u32				CurPsLevel;
+	u32				RegRfPsLevel;
+
+	//Fw Control LPS
+	bool				bFwCtrlLPS;
+	u8				FWCtrlPSMode;
+
+	//2009.01.01 added by tynli
+	// Record if there is a link request in IPS RF off progress.
+	bool				LinkReqInIPSRFOffPgs;
+	// To make sure that connect info should be executed, so we set the bit to filter the link info which comes after the connect info.
+	bool				BufConnectinfoBefore;
+
+}RT_POWER_SAVE_CONTROL,*PRT_POWER_SAVE_CONTROL;
+
+typedef u32 RT_RF_CHANGE_SOURCE;
+#define RF_CHANGE_BY_SW BIT31
+#define RF_CHANGE_BY_HW BIT30
+#define RF_CHANGE_BY_PS BIT29
+#define RF_CHANGE_BY_IPS BIT28
+#define RF_CHANGE_BY_INIT	0	// Do not change the RFOff reason. Defined by Bruce, 2008-01-17.
+
+#ifdef ENABLE_DOT11D
+typedef enum
+{
+	COUNTRY_CODE_FCC = 0,
+	COUNTRY_CODE_IC = 1,
+	COUNTRY_CODE_ETSI = 2,
+	COUNTRY_CODE_SPAIN = 3,
+	COUNTRY_CODE_FRANCE = 4,
+	COUNTRY_CODE_MKK = 5,
+	COUNTRY_CODE_MKK1 = 6,
+	COUNTRY_CODE_ISRAEL = 7,
+	COUNTRY_CODE_TELEC,
+	COUNTRY_CODE_MIC,
+	COUNTRY_CODE_GLOBAL_DOMAIN
+}country_code_type_t;
+#endif
+	// Firmware realted CMD IO.
+typedef	enum _FW_CMD_IO_TYPE{
+	FW_CMD_DIG_ENABLE = 0, // For DIG DM
+	FW_CMD_DIG_DISABLE = 1,
+	FW_CMD_DIG_HALT = 2,
+	FW_CMD_DIG_RESUME = 3,
+	FW_CMD_HIGH_PWR_ENABLE = 4, // For High Power DM
+	FW_CMD_HIGH_PWR_DISABLE = 5,
+	FW_CMD_RA_RESET = 6, // For Rate adaptive DM
+	FW_CMD_RA_ACTIVE= 7,
+	FW_CMD_RA_REFRESH_N= 8,
+	FW_CMD_RA_REFRESH_BG= 9,
+	FW_CMD_IQK_ENABLE = 10, // For FW supported IQK
+	FW_CMD_TXPWR_TRACK_ENABLE = 11,	// Tx power tracking switch
+	FW_CMD_TXPWR_TRACK_DISABLE = 12,	// Tx power tracking switch
+	FW_CMD_PAUSE_DM_BY_SCAN = 13,
+	FW_CMD_RESUME_DM_BY_SCAN = 14,
+	FW_CMD_MID_HIGH_PWR_ENABLE = 15,
+	FW_CMD_LPS_ENTER = 16,			// Indifate firmware that driver enters LPS, For PS-Poll hardware bug
+	FW_CMD_LPS_LEAVE = 17,			// Indicate firmware that driver leave LPS, 2009/1/4, by Emily
+}FW_CMD_IO_TYPE,*PFW_CMD_IO_TYPE;
+#define RT_MAX_LD_SLOT_NUM	10
+typedef struct _RT_LINK_DETECT_T{
+
+	u32				NumRecvBcnInPeriod;
+	u32				NumRecvDataInPeriod;
+
+	u32				RxBcnNum[RT_MAX_LD_SLOT_NUM];	// number of Rx beacon / CheckForHang_period  to determine link status
+	u32				RxDataNum[RT_MAX_LD_SLOT_NUM];	// number of Rx data / CheckForHang_period  to determine link status
+	u16				SlotNum;	// number of CheckForHang period to determine link status
+	u16				SlotIndex;
+
+	u32				NumTxOkInPeriod;
+	u32				NumRxOkInPeriod;
+	bool				bBusyTraffic;
+}RT_LINK_DETECT_T, *PRT_LINK_DETECT_T;
+
+
+struct ieee80211_device {
+	struct net_device *dev;
+        struct ieee80211_security sec;
+
+	//hw security related
+//	u8 hwsec_support; //support?
+	u8 hwsec_active;  //hw security active.
+	bool is_silent_reset;
+	bool is_roaming;
+	bool ieee_up;
+	//added by amy
+	bool bSupportRemoteWakeUp;
+	RT_PS_MODE	dot11PowerSaveMode; // Power save mode configured.
+	bool actscanning;
+	//added by amy 090313
+	bool be_scan_inprogress;
+	bool beinretry;
+	RT_RF_POWER_STATE		eRFPowerState;
+	RT_RF_CHANGE_SOURCE	RfOffReason;
+	bool is_set_key;
+	//11n spec related I wonder if These info structure need to be moved out of ieee80211_device
+
+	//11n HT below
+	PRT_HIGH_THROUGHPUT	pHTInfo;
+	//struct timer_list		SwBwTimer;
+//	spinlock_t chnlop_spinlock;
+	spinlock_t bw_spinlock;
+
+	spinlock_t reorder_spinlock;
+	// for HT operation rate set.  we use this one for HT data rate to seperate different descriptors
+	//the way fill this is the same as in the IE
+	u8	Regdot11HTOperationalRateSet[16];		//use RATR format
+	u8	dot11HTOperationalRateSet[16];		//use RATR format
+	u8	RegHTSuppRateSet[16];
+	u8				HTCurrentOperaRate;
+	u8				HTHighestOperaRate;
+	//wb added for rate operation mode to firmware
+	u8	bTxDisableRateFallBack;
+	u8 	bTxUseDriverAssingedRate;
+	atomic_t	atm_chnlop;
+	atomic_t	atm_swbw;
+//	u8	HTHighestOperaRate;
+//	u8 	HTCurrentOperaRate;
+
+	// 802.11e and WMM Traffic Stream Info (TX)
+	struct list_head		Tx_TS_Admit_List;
+	struct list_head		Tx_TS_Pending_List;
+	struct list_head		Tx_TS_Unused_List;
+	TX_TS_RECORD		TxTsRecord[TOTAL_TS_NUM];
+	// 802.11e and WMM Traffic Stream Info (RX)
+	struct list_head		Rx_TS_Admit_List;
+	struct list_head		Rx_TS_Pending_List;
+	struct list_head		Rx_TS_Unused_List;
+	RX_TS_RECORD		RxTsRecord[TOTAL_TS_NUM];
+//#ifdef TO_DO_LIST
+	RX_REORDER_ENTRY	RxReorderEntry[128];
+	struct list_head		RxReorder_Unused_List;
+//#endif
+	// Qos related. Added by Annie, 2005-11-01.
+//	PSTA_QOS			pStaQos;
+	u8				ForcedPriority;		// Force per-packet priority 1~7. (default: 0, not to force it.)
+
+
+	/* Bookkeeping structures */
+	struct net_device_stats stats;
+	struct ieee80211_stats ieee_stats;
+	struct ieee80211_softmac_stats softmac_stats;
+
+	/* Probe / Beacon management */
+	struct list_head network_free_list;
+	struct list_head network_list;
+	struct ieee80211_network *networks;
+	int scans;
+	int scan_age;
+
+	int iw_mode; /* operating mode (IW_MODE_*) */
+	struct iw_spy_data spy_data;
+
+	spinlock_t lock;
+	spinlock_t wpax_suitlist_lock;
+
+	int tx_headroom; /* Set to size of any additional room needed at front
+			  * of allocated Tx SKBs */
+	u32 config;
+
+	/* WEP and other encryption related settings at the device level */
+	int open_wep; /* Set to 1 to allow unencrypted frames */
+	int auth_mode;
+	int reset_on_keychange; /* Set to 1 if the HW needs to be reset on
+				 * WEP key changes */
+
+	/* If the host performs {en,de}cryption, then set to 1 */
+	int host_encrypt;
+	int host_encrypt_msdu;
+	int host_decrypt;
+        /* host performs multicast decryption */
+        int host_mc_decrypt;
+
+        /* host should strip IV and ICV from protected frames */
+        /* meaningful only when hardware decryption is being used */
+        int host_strip_iv_icv;
+
+        int host_open_frag;
+        int host_build_iv;
+	int ieee802_1x; /* is IEEE 802.1X used */
+
+	/* WPA data */
+	bool bHalfWirelessN24GMode;
+	int wpa_enabled;
+	int drop_unencrypted;
+	int tkip_countermeasures;
+	int privacy_invoked;
+	size_t wpa_ie_len;
+	u8 *wpa_ie;
+	u8 ap_mac_addr[6];
+	u16 pairwise_key_type;
+	u16 group_key_type;
+	struct list_head crypt_deinit_list;
+	struct ieee80211_crypt_data *crypt[WEP_KEYS];
+	int tx_keyidx; /* default TX key index (crypt[tx_keyidx]) */
+	struct timer_list crypt_deinit_timer;
+        int crypt_quiesced;
+
+	int bcrx_sta_key; /* use individual keys to override default keys even
+			   * with RX of broad/multicast frames */
+
+	/* Fragmentation structures */
+	// each streaming contain a entry
+	struct ieee80211_frag_entry frag_cache[17][IEEE80211_FRAG_CACHE_LEN];
+	unsigned int frag_next_idx[17];
+	u16 fts; /* Fragmentation Threshold */
+#define DEFAULT_RTS_THRESHOLD 2346U
+#define MIN_RTS_THRESHOLD 1
+#define MAX_RTS_THRESHOLD 2346U
+        u16 rts; /* RTS threshold */
+
+        /* Association info */
+        u8 bssid[ETH_ALEN];
+
+	/* This stores infos for the current network.
+	 * Either the network we are associated in INFRASTRUCTURE
+	 * or the network that we are creating in MASTER mode.
+	 * ad-hoc is a mixture ;-).
+	 * Note that in infrastructure mode, even when not associated,
+	 * fields bssid and essid may be valid (if wpa_set and essid_set
+	 * are true) as thy carry the value set by the user via iwconfig
+	 */
+	struct ieee80211_network current_network;
+
+	enum ieee80211_state state;
+
+	int short_slot;
+	int reg_mode;
+	int mode;       /* A, B, G */
+	int modulation; /* CCK, OFDM */
+	int freq_band;  /* 2.4Ghz, 5.2Ghz, Mixed */
+	int abg_true;   /* ABG flag              */
+
+	/* used for forcing the ibss workqueue to terminate
+	 * without wait for the syncro scan to terminate
+	 */
+	short sync_scan_hurryup;
+	u16 scan_watch_dog;
+        int perfect_rssi;
+        int worst_rssi;
+
+        u16 prev_seq_ctl;       /* used to drop duplicate frames */
+
+	/* map of allowed channels. 0 is dummy */
+	// FIXME: remeber to default to a basic channel plan depending of the PHY type
+#ifdef ENABLE_DOT11D
+	void* pDot11dInfo;
+	bool bGlobalDomain;
+#else
+	int channel_map[MAX_CHANNEL_NUMBER+1];
+#endif
+	int rate;       /* current rate */
+	int basic_rate;
+	//FIXME: pleace callback, see if redundant with softmac_features
+	short active_scan;
+
+	/* this contains flags for selectively enable softmac support */
+	u16 softmac_features;
+
+	/* if the sequence control field is not filled by HW */
+	u16 seq_ctrl[5];
+
+	/* association procedure transaction sequence number */
+	u16 associate_seq;
+
+	/* AID for RTXed association responses */
+	u16 assoc_id;
+
+	/* power save mode related*/
+	u8 ack_tx_to_ieee;
+	short ps;
+	short sta_sleep;
+	int ps_timeout;
+	int ps_period;
+	struct tasklet_struct ps_task;
+	u32 ps_th;
+	u32 ps_tl;
+
+	short raw_tx;
+	/* used if IEEE_SOFTMAC_TX_QUEUE is set */
+	short queue_stop;
+	short scanning;
+	short proto_started;
+
+	struct semaphore wx_sem;
+	struct semaphore scan_sem;
+
+	spinlock_t mgmt_tx_lock;
+	spinlock_t beacon_lock;
+
+	short beacon_txing;
+
+	short wap_set;
+	short ssid_set;
+
+	u8  wpax_type_set;    //{added by David, 2006.9.28}
+	u32 wpax_type_notify; //{added by David, 2006.9.26}
+
+	/* QoS related flag */
+	char init_wmmparam_flag;
+	/* set on initialization */
+	u8  qos_support;
+
+	/* for discarding duplicated packets in IBSS */
+	struct list_head ibss_mac_hash[IEEE_IBSS_MAC_HASH_SIZE];
+
+	/* for discarding duplicated packets in BSS */
+	u16 last_rxseq_num[17]; /* rx seq previous per-tid */
+	u16 last_rxfrag_num[17];/* tx frag previous per-tid */
+	unsigned long last_packet_time[17];
+
+	/* for PS mode */
+	unsigned long last_rx_ps_time;
+
+	/* used if IEEE_SOFTMAC_SINGLE_QUEUE is set */
+	struct sk_buff *mgmt_queue_ring[MGMT_QUEUE_NUM];
+	int mgmt_queue_head;
+	int mgmt_queue_tail;
+//{ added for rtl819x
+#define IEEE80211_QUEUE_LIMIT 128
+	u8 AsocRetryCount;
+	unsigned int hw_header;
+	struct sk_buff_head skb_waitQ[MAX_QUEUE_SIZE];
+	struct sk_buff_head  skb_aggQ[MAX_QUEUE_SIZE];
+	struct sk_buff_head  skb_drv_aggQ[MAX_QUEUE_SIZE];
+	u32	sta_edca_param[4];
+	bool aggregation;
+	// Enable/Disable Rx immediate BA capability.
+	bool enable_rx_imm_BA;
+	bool bibsscoordinator;
+
+	//+by amy for DM ,080515
+	//Dynamic Tx power for near/far range enable/Disable  , by amy , 2008-05-15
+	bool	bdynamic_txpower_enable;
+
+	bool bCTSToSelfEnable;
+	u8 	CTSToSelfTH;
+
+	u32 	fsync_time_interval;
+	u32	fsync_rate_bitmap;
+	u8	fsync_rssi_threshold;
+	bool	bfsync_enable;
+
+	u8	fsync_multiple_timeinterval;		// FsyncMultipleTimeInterval * FsyncTimeInterval
+	u32	fsync_firstdiff_ratethreshold;		// low threshold
+	u32	fsync_seconddiff_ratethreshold;	 // decrease threshold
+	Fsync_State			fsync_state;
+	bool		bis_any_nonbepkts;
+	//20Mhz 40Mhz AutoSwitch Threshold
+	bandwidth_autoswitch bandwidth_auto_switch;
+	//for txpower tracking
+	bool FwRWRF;
+
+	//added by amy for AP roaming
+	RT_LINK_DETECT_T	LinkDetectInfo;
+        //added by amy for ps
+	RT_POWER_SAVE_CONTROL	PowerSaveControl;
+//}
+	/* used if IEEE_SOFTMAC_TX_QUEUE is set */
+	struct  tx_pending_t tx_pending;
+
+	/* used if IEEE_SOFTMAC_ASSOCIATE is set */
+	struct timer_list associate_timer;
+
+	/* used if IEEE_SOFTMAC_BEACONS is set */
+	struct timer_list beacon_timer;
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+        struct work_struct associate_complete_wq;
+        struct work_struct associate_procedure_wq;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+        struct delayed_work softmac_scan_wq;
+        struct delayed_work associate_retry_wq;
+	 struct delayed_work start_ibss_wq;
+	 struct delayed_work hw_wakeup_wq;
+	struct delayed_work hw_sleep_wq;
+	struct delayed_work link_change_wq;
+#else
+        struct work_struct softmac_scan_wq;
+        struct work_struct associate_retry_wq;
+	struct work_struct start_ibss_wq;
+	struct work_struct hw_wakeup_wq;
+	struct work_struct hw_sleep_wq;
+	struct work_struct link_change_wq;
+#endif
+        struct work_struct wx_sync_scan_wq;
+        struct workqueue_struct *wq;
+#else
+	/* used for periodly scan */
+	struct timer_list scan_timer;
+
+	struct tq_struct associate_complete_wq;
+	struct tq_struct associate_retry_wq;
+	struct tq_struct start_ibss_wq;
+	struct tq_struct associate_procedure_wq;
+	struct tq_struct softmac_scan_wq;
+	struct tq_struct wx_sync_scan_wq;
+	struct tq_struct hw_wakeup_wq;
+	struct tq_struct hw_sleep_wq;
+	struct tq_struct link_change_wq;
+
+#endif
+        // Qos related. Added by Annie, 2005-11-01.
+        //STA_QOS  StaQos;
+
+        //u32 STA_EDCA_PARAM[4];
+	//CHANNEL_ACCESS_SETTING ChannelAccessSetting;
+
+
+	/* Callback functions */
+	void (*set_security)(struct net_device *dev,
+			     struct ieee80211_security *sec);
+
+	/* Used to TX data frame by using txb structs.
+	 * this is not used if in the softmac_features
+	 * is set the flag IEEE_SOFTMAC_TX_QUEUE
+	 */
+	int (*hard_start_xmit)(struct ieee80211_txb *txb,
+			       struct net_device *dev);
+
+	int (*reset_port)(struct net_device *dev);
+        int (*is_queue_full) (struct net_device * dev, int pri);
+
+        int (*handle_management) (struct net_device * dev,
+                                  struct ieee80211_network * network, u16 type);
+        int (*is_qos_active) (struct net_device *dev, struct sk_buff *skb);
+
+	/* Softmac-generated frames (mamagement) are TXed via this
+	 * callback if the flag IEEE_SOFTMAC_SINGLE_QUEUE is
+	 * not set. As some cards may have different HW queues that
+	 * one might want to use for data and management frames
+	 * the option to have two callbacks might be useful.
+	 * This fucntion can't sleep.
+	 */
+	int (*softmac_hard_start_xmit)(struct sk_buff *skb,
+			       struct net_device *dev);
+
+	/* used instead of hard_start_xmit (not softmac_hard_start_xmit)
+	 * if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data
+	 * frames. I the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
+	 * then also management frames are sent via this callback.
+	 * This function can't sleep.
+	 */
+	void (*softmac_data_hard_start_xmit)(struct sk_buff *skb,
+			       struct net_device *dev,int rate);
+
+	/* stops the HW queue for DATA frames. Useful to avoid
+	 * waste time to TX data frame when we are reassociating
+	 * This function can sleep.
+	 */
+	void (*data_hard_stop)(struct net_device *dev);
+
+	/* OK this is complementar to data_poll_hard_stop */
+	void (*data_hard_resume)(struct net_device *dev);
+
+	/* ask to the driver to retune the radio .
+	 * This function can sleep. the driver should ensure
+	 * the radio has been swithced before return.
+	 */
+	void (*set_chan)(struct net_device *dev,short ch);
+
+	/* These are not used if the ieee stack takes care of
+	 * scanning (IEEE_SOFTMAC_SCAN feature set).
+	 * In this case only the set_chan is used.
+	 *
+	 * The syncro version is similar to the start_scan but
+	 * does not return until all channels has been scanned.
+	 * this is called in user context and should sleep,
+	 * it is called in a work_queue when swithcing to ad-hoc mode
+	 * or in behalf of iwlist scan when the card is associated
+	 * and root user ask for a scan.
+	 * the fucntion stop_scan should stop both the syncro and
+	 * background scanning and can sleep.
+	 * The fucntion start_scan should initiate the background
+	 * scanning and can't sleep.
+	 */
+	void (*scan_syncro)(struct net_device *dev);
+	void (*start_scan)(struct net_device *dev);
+	void (*stop_scan)(struct net_device *dev);
+
+	/* indicate the driver that the link state is changed
+	 * for example it may indicate the card is associated now.
+	 * Driver might be interested in this to apply RX filter
+	 * rules or simply light the LINK led
+	 */
+	void (*link_change)(struct net_device *dev);
+
+	/* these two function indicates to the HW when to start
+	 * and stop to send beacons. This is used when the
+	 * IEEE_SOFTMAC_BEACONS is not set. For now the
+	 * stop_send_bacons is NOT guaranteed to be called only
+	 * after start_send_beacons.
+	 */
+	void (*start_send_beacons) (struct net_device *dev);
+	void (*stop_send_beacons) (struct net_device *dev);
+
+	/* power save mode related */
+	void (*sta_wake_up) (struct net_device *dev);
+//	void (*ps_request_tx_ack) (struct net_device *dev);
+	void (*enter_sleep_state) (struct net_device *dev, u32 th, u32 tl);
+	short (*ps_is_queue_empty) (struct net_device *dev);
+#if 0
+	/* Typical STA methods */
+        int (*handle_auth) (struct net_device * dev,
+                            struct ieee80211_auth * auth);
+        int (*handle_deauth) (struct net_device * dev,
+                              struct ieee80211_deauth * auth);
+        int (*handle_action) (struct net_device * dev,
+                              struct ieee80211_action * action,
+                              struct ieee80211_rx_stats * stats);
+        int (*handle_disassoc) (struct net_device * dev,
+                                struct ieee80211_disassoc * assoc);
+#endif
+        int (*handle_beacon) (struct net_device * dev, struct ieee80211_beacon * beacon, struct ieee80211_network * network);
+#if 0
+        int (*handle_probe_response) (struct net_device * dev,
+                                      struct ieee80211_probe_response * resp,
+                                      struct ieee80211_network * network);
+        int (*handle_probe_request) (struct net_device * dev,
+                                     struct ieee80211_probe_request * req,
+                                     struct ieee80211_rx_stats * stats);
+#endif
+        int (*handle_assoc_response) (struct net_device * dev, struct ieee80211_assoc_response_frame * resp, struct ieee80211_network * network);
+
+#if 0
+        /* Typical AP methods */
+        int (*handle_assoc_request) (struct net_device * dev);
+        int (*handle_reassoc_request) (struct net_device * dev,
+                                       struct ieee80211_reassoc_request * req);
+#endif
+
+	/* check whether Tx hw resouce available */
+	short (*check_nic_enough_desc)(struct net_device *dev, int queue_index);
+	//added by wb for HT related
+//	void (*SwChnlByTimerHandler)(struct net_device *dev, int channel);
+	void (*SetBWModeHandler)(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset);
+//	void (*UpdateHalRATRTableHandler)(struct net_device* dev, u8* pMcsRate);
+	bool (*GetNmodeSupportBySecCfg)(struct net_device* dev);
+	void (*SetWirelessMode)(struct net_device* dev, u8 wireless_mode);
+	bool (*GetHalfNmodeSupportByAPsHandler)(struct net_device* dev);
+	bool (*is_ap_in_wep_tkip)(struct net_device* dev);
+	void (*InitialGainHandler)(struct net_device *dev, u8 Operation);
+	bool (*SetFwCmdHandler)(struct net_device *dev,	FW_CMD_IO_TYPE		FwCmdIO);
+	void (*LedControlHandler)(struct net_device * dev, LED_CTL_MODE LedAction);
+	/* This must be the last item so that it points to the data
+	 * allocated beyond this structure by alloc_ieee80211 */
+	u8 priv[0];
+};
+
+#define IEEE_A            (1<<0)
+#define IEEE_B            (1<<1)
+#define IEEE_G            (1<<2)
+#define IEEE_N_24G 		  (1<<4)
+#define	IEEE_N_5G		  (1<<5)
+#define IEEE_MODE_MASK    (IEEE_A|IEEE_B|IEEE_G)
+
+/* Generate a 802.11 header */
+
+/* Uses the channel change callback directly
+ * instead of [start/stop] scan callbacks
+ */
+#define IEEE_SOFTMAC_SCAN (1<<2)
+
+/* Perform authentication and association handshake */
+#define IEEE_SOFTMAC_ASSOCIATE (1<<3)
+
+/* Generate probe requests */
+#define IEEE_SOFTMAC_PROBERQ (1<<4)
+
+/* Generate respones to probe requests */
+#define IEEE_SOFTMAC_PROBERS (1<<5)
+
+/* The ieee802.11 stack will manages the netif queue
+ * wake/stop for the driver, taking care of 802.11
+ * fragmentation. See softmac.c for details. */
+#define IEEE_SOFTMAC_TX_QUEUE (1<<7)
+
+/* Uses only the softmac_data_hard_start_xmit
+ * even for TX management frames.
+ */
+#define IEEE_SOFTMAC_SINGLE_QUEUE (1<<8)
+
+/* Generate beacons.  The stack will enqueue beacons
+ * to the card
+ */
+#define IEEE_SOFTMAC_BEACONS (1<<6)
+
+static inline void *ieee80211_priv(struct net_device *dev)
+{
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	return ((struct ieee80211_device *)netdev_priv(dev))->priv;
+#else
+	return ((struct ieee80211_device *)dev->priv)->priv;
+#endif
+}
+
+extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
+{
+	/* Single white space is for Linksys APs */
+	if (essid_len == 1 && essid[0] == ' ')
+		return 1;
+
+	/* Otherwise, if the entire essid is 0, we assume it is hidden */
+	while (essid_len) {
+		essid_len--;
+		if (essid[essid_len] != '\0')
+			return 0;
+	}
+
+	return 1;
+}
+
+extern inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, int mode)
+{
+	/*
+	 * It is possible for both access points and our device to support
+	 * combinations of modes, so as long as there is one valid combination
+	 * of ap/device supported modes, then return success
+	 *
+	 */
+	if ((mode & IEEE_A) &&
+	    (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
+	    (ieee->freq_band & IEEE80211_52GHZ_BAND))
+		return 1;
+
+	if ((mode & IEEE_G) &&
+	    (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
+	    (ieee->freq_band & IEEE80211_24GHZ_BAND))
+		return 1;
+
+	if ((mode & IEEE_B) &&
+	    (ieee->modulation & IEEE80211_CCK_MODULATION) &&
+	    (ieee->freq_band & IEEE80211_24GHZ_BAND))
+		return 1;
+
+	return 0;
+}
+
+extern inline int ieee80211_get_hdrlen(u16 fc)
+{
+	int hdrlen = IEEE80211_3ADDR_LEN;
+
+	switch (WLAN_FC_GET_TYPE(fc)) {
+	case IEEE80211_FTYPE_DATA:
+		if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS))
+			hdrlen = IEEE80211_4ADDR_LEN; /* Addr4 */
+		if(IEEE80211_QOS_HAS_SEQ(fc))
+			hdrlen += 2; /* QOS ctrl*/
+		break;
+	case IEEE80211_FTYPE_CTL:
+		switch (WLAN_FC_GET_STYPE(fc)) {
+		case IEEE80211_STYPE_CTS:
+		case IEEE80211_STYPE_ACK:
+			hdrlen = IEEE80211_1ADDR_LEN;
+			break;
+		default:
+			hdrlen = IEEE80211_2ADDR_LEN;
+			break;
+		}
+		break;
+	}
+
+	return hdrlen;
+}
+
+static inline u8 *ieee80211_get_payload(struct ieee80211_hdr *hdr)
+{
+        switch (ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl))) {
+        case IEEE80211_1ADDR_LEN:
+                return ((struct ieee80211_hdr_1addr *)hdr)->payload;
+        case IEEE80211_2ADDR_LEN:
+                return ((struct ieee80211_hdr_2addr *)hdr)->payload;
+        case IEEE80211_3ADDR_LEN:
+                return ((struct ieee80211_hdr_3addr *)hdr)->payload;
+        case IEEE80211_4ADDR_LEN:
+                return ((struct ieee80211_hdr_4addr *)hdr)->payload;
+        }
+        return NULL;
+}
+
+static inline int ieee80211_is_ofdm_rate(u8 rate)
+{
+        switch (rate & ~IEEE80211_BASIC_RATE_MASK) {
+        case IEEE80211_OFDM_RATE_6MB:
+        case IEEE80211_OFDM_RATE_9MB:
+        case IEEE80211_OFDM_RATE_12MB:
+        case IEEE80211_OFDM_RATE_18MB:
+        case IEEE80211_OFDM_RATE_24MB:
+        case IEEE80211_OFDM_RATE_36MB:
+        case IEEE80211_OFDM_RATE_48MB:
+        case IEEE80211_OFDM_RATE_54MB:
+                return 1;
+        }
+        return 0;
+}
+
+static inline int ieee80211_is_cck_rate(u8 rate)
+{
+        switch (rate & ~IEEE80211_BASIC_RATE_MASK) {
+        case IEEE80211_CCK_RATE_1MB:
+        case IEEE80211_CCK_RATE_2MB:
+        case IEEE80211_CCK_RATE_5MB:
+        case IEEE80211_CCK_RATE_11MB:
+                return 1;
+        }
+        return 0;
+}
+
+
+/* ieee80211.c */
+extern void free_ieee80211(struct net_device *dev);
+extern struct net_device *alloc_ieee80211(int sizeof_priv);
+
+extern int ieee80211_set_encryption(struct ieee80211_device *ieee);
+
+/* ieee80211_tx.c */
+
+extern int ieee80211_encrypt_fragment(
+	struct ieee80211_device *ieee,
+	struct sk_buff *frag,
+	int hdr_len);
+
+extern int ieee80211_xmit(struct sk_buff *skb,
+			  struct net_device *dev);
+extern void ieee80211_txb_free(struct ieee80211_txb *);
+
+
+/* ieee80211_rx.c */
+extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
+			struct ieee80211_rx_stats *rx_stats);
+extern void ieee80211_rx_mgt(struct ieee80211_device *ieee,
+			     struct ieee80211_hdr_4addr *header,
+			     struct ieee80211_rx_stats *stats);
+
+/* ieee80211_wx.c */
+extern int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
+				 struct iw_request_info *info,
+				 union iwreq_data *wrqu, char *key);
+extern int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
+				   struct iw_request_info *info,
+				   union iwreq_data *wrqu, char *key);
+extern int ieee80211_wx_get_encode(struct ieee80211_device *ieee,
+				   struct iw_request_info *info,
+				   union iwreq_data *wrqu, char *key);
+#if WIRELESS_EXT >= 18
+extern int ieee80211_wx_get_encode_ext(struct ieee80211_device *ieee,
+                            struct iw_request_info *info,
+                            union iwreq_data* wrqu, char *extra);
+extern int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
+                            struct iw_request_info *info,
+                            union iwreq_data* wrqu, char *extra);
+extern int ieee80211_wx_set_auth(struct ieee80211_device *ieee,
+                               struct iw_request_info *info,
+                               struct iw_param *data, char *extra);
+extern int ieee80211_wx_set_mlme(struct ieee80211_device *ieee,
+                               struct iw_request_info *info,
+                               union iwreq_data *wrqu, char *extra);
+#endif
+extern int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len);
+
+/* ieee80211_softmac.c */
+extern short ieee80211_is_54g(struct ieee80211_network net);
+extern short ieee80211_is_shortslot(struct ieee80211_network net);
+extern int ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
+			struct ieee80211_rx_stats *rx_stats, u16 type,
+			u16 stype);
+extern void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee80211_network *net);
+
+void SendDisassociation(struct ieee80211_device *ieee, u8* asSta, u8 asRsn);
+extern void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device *ieee);
+
+extern void ieee80211_stop_send_beacons(struct ieee80211_device *ieee);
+extern void notify_wx_assoc_event(struct ieee80211_device *ieee);
+extern void ieee80211_softmac_check_all_nets(struct ieee80211_device *ieee);
+extern void ieee80211_start_bss(struct ieee80211_device *ieee);
+extern void ieee80211_start_master_bss(struct ieee80211_device *ieee);
+extern void ieee80211_start_ibss(struct ieee80211_device *ieee);
+extern void ieee80211_softmac_init(struct ieee80211_device *ieee);
+extern void ieee80211_softmac_free(struct ieee80211_device *ieee);
+extern void ieee80211_associate_abort(struct ieee80211_device *ieee);
+extern void ieee80211_disassociate(struct ieee80211_device *ieee);
+extern void ieee80211_stop_scan(struct ieee80211_device *ieee);
+extern void ieee80211_start_scan_syncro(struct ieee80211_device *ieee);
+extern void ieee80211_check_all_nets(struct ieee80211_device *ieee);
+extern void ieee80211_start_protocol(struct ieee80211_device *ieee);
+extern void ieee80211_stop_protocol(struct ieee80211_device *ieee);
+extern void ieee80211_softmac_start_protocol(struct ieee80211_device *ieee);
+extern void ieee80211_softmac_stop_protocol(struct ieee80211_device *ieee);
+extern void ieee80211_reset_queue(struct ieee80211_device *ieee);
+extern void ieee80211_wake_queue(struct ieee80211_device *ieee);
+extern void ieee80211_stop_queue(struct ieee80211_device *ieee);
+extern struct sk_buff *ieee80211_get_beacon(struct ieee80211_device *ieee);
+extern void ieee80211_start_send_beacons(struct ieee80211_device *ieee);
+extern void ieee80211_stop_send_beacons(struct ieee80211_device *ieee);
+extern int ieee80211_wpa_supplicant_ioctl(struct ieee80211_device *ieee, struct iw_point *p);
+extern void notify_wx_assoc_event(struct ieee80211_device *ieee);
+extern void ieee80211_ps_tx_ack(struct ieee80211_device *ieee, short success);
+
+extern void softmac_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee);
+
+/* ieee80211_crypt_ccmp&tkip&wep.c */
+extern void ieee80211_tkip_null(void);
+extern void ieee80211_wep_null(void);
+extern void ieee80211_ccmp_null(void);
+
+/* ieee80211_softmac_wx.c */
+
+extern int ieee80211_wx_get_wap(struct ieee80211_device *ieee,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu, char *ext);
+
+extern int ieee80211_wx_set_wap(struct ieee80211_device *ieee,
+			 struct iw_request_info *info,
+			 union iwreq_data *awrq,
+			 char *extra);
+
+extern int ieee80211_wx_get_essid(struct ieee80211_device *ieee, struct iw_request_info *a,union iwreq_data *wrqu,char *b);
+
+extern int ieee80211_wx_set_rate(struct ieee80211_device *ieee,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra);
+
+extern int ieee80211_wx_get_rate(struct ieee80211_device *ieee,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra);
+
+extern int ieee80211_wx_set_mode(struct ieee80211_device *ieee, struct iw_request_info *a,
+			     union iwreq_data *wrqu, char *b);
+
+extern int ieee80211_wx_set_scan(struct ieee80211_device *ieee, struct iw_request_info *a,
+			     union iwreq_data *wrqu, char *b);
+
+extern int ieee80211_wx_set_essid(struct ieee80211_device *ieee,
+			      struct iw_request_info *a,
+			      union iwreq_data *wrqu, char *extra);
+
+extern int ieee80211_wx_get_mode(struct ieee80211_device *ieee, struct iw_request_info *a,
+			     union iwreq_data *wrqu, char *b);
+
+extern int ieee80211_wx_set_freq(struct ieee80211_device *ieee, struct iw_request_info *a,
+			     union iwreq_data *wrqu, char *b);
+
+extern int ieee80211_wx_get_freq(struct ieee80211_device *ieee, struct iw_request_info *a,
+			     union iwreq_data *wrqu, char *b);
+
+//extern void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee);
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+extern void ieee80211_wx_sync_scan_wq(struct work_struct *work);
+#else
+ extern void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee);
+#endif
+
+
+extern int ieee80211_wx_set_rawtx(struct ieee80211_device *ieee,
+			       struct iw_request_info *info,
+			       union iwreq_data *wrqu, char *extra);
+
+extern int ieee80211_wx_get_name(struct ieee80211_device *ieee,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra);
+
+extern int ieee80211_wx_set_power(struct ieee80211_device *ieee,
+				 struct iw_request_info *info,
+				 union iwreq_data *wrqu, char *extra);
+
+extern int ieee80211_wx_get_power(struct ieee80211_device *ieee,
+				 struct iw_request_info *info,
+				 union iwreq_data *wrqu, char *extra);
+
+extern int ieee80211_wx_set_rts(struct ieee80211_device *ieee,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra);
+
+extern int ieee80211_wx_get_rts(struct ieee80211_device *ieee,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra);
+//HT
+#define MAX_RECEIVE_BUFFER_SIZE 9100  //
+extern void HTDebugHTCapability(u8* CapIE, u8* TitleString );
+extern void HTDebugHTInfo(u8*  InfoIE, u8* TitleString);
+
+void HTSetConnectBwMode(struct ieee80211_device* ieee, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET    Offset);
+extern void HTUpdateDefaultSetting(struct ieee80211_device* ieee);
+extern void HTConstructCapabilityElement(struct ieee80211_device* ieee, u8* posHTCap, u8* len, u8 isEncrypt);
+extern void HTConstructInfoElement(struct ieee80211_device* ieee, u8* posHTInfo, u8* len, u8 isEncrypt);
+extern void HTConstructRT2RTAggElement(struct ieee80211_device* ieee, u8* posRT2RTAgg, u8* len);
+extern void HTOnAssocRsp(struct ieee80211_device *ieee);
+extern void HTInitializeHTInfo(struct ieee80211_device* ieee);
+extern void HTInitializeBssDesc(PBSS_HT pBssHT);
+extern void HTResetSelfAndSavePeerSetting(struct ieee80211_device* ieee, struct ieee80211_network * pNetwork);
+extern void HTUpdateSelfAndPeerSetting(struct ieee80211_device* ieee,   struct ieee80211_network * pNetwork);
+extern u8 HTGetHighestMCSRate(struct ieee80211_device* ieee, u8* pMCSRateSet, u8* pMCSFilter);
+extern u8 MCS_FILTER_ALL[];
+extern u16 MCS_DATA_RATE[2][2][77] ;
+extern u8 HTCCheck(struct ieee80211_device* ieee, u8*   pFrame);
+//extern void HTSetConnectBwModeCallback(unsigned long data);
+extern void HTResetIOTSetting(PRT_HIGH_THROUGHPUT  pHTInfo);
+extern bool IsHTHalfNmodeAPs(struct ieee80211_device* ieee);
+extern u16 HTHalfMcsToDataRate(struct ieee80211_device* ieee,  u8      nMcsRate);
+extern u16 HTMcsToDataRate( struct ieee80211_device* ieee, u8 nMcsRate);
+extern u16  TxCountToDataRate( struct ieee80211_device* ieee, u8 nDataRate);
+//function in BAPROC.c
+extern int ieee80211_rx_ADDBAReq( struct ieee80211_device* ieee, struct sk_buff *skb);
+extern int ieee80211_rx_ADDBARsp( struct ieee80211_device* ieee, struct sk_buff *skb);
+extern int ieee80211_rx_DELBA(struct ieee80211_device* ieee,struct sk_buff *skb);
+extern void TsInitAddBA( struct ieee80211_device* ieee, PTX_TS_RECORD   pTS, u8 Policy, u8 bOverwritePending);
+extern void TsInitDelBA( struct ieee80211_device* ieee, PTS_COMMON_INFO pTsCommonInfo, TR_SELECT TxRxSelect);
+extern void BaSetupTimeOut(unsigned long data);
+extern void TxBaInactTimeout(unsigned long data);
+extern void RxBaInactTimeout(unsigned long data);
+extern void ResetBaEntry( PBA_RECORD pBA);
+//function in TS.c
+extern bool GetTs(
+        struct ieee80211_device*        ieee,
+        PTS_COMMON_INFO                 *ppTS,
+        u8*                             Addr,
+        u8                              TID,
+        TR_SELECT                       TxRxSelect,  //Rx:1, Tx:0
+        bool                            bAddNewTs
+        );
+extern void TSInitialize(struct ieee80211_device *ieee);
+extern  void TsStartAddBaProcess(struct ieee80211_device* ieee, PTX_TS_RECORD   pTxTS);
+extern void RemovePeerTS(struct ieee80211_device* ieee, u8* Addr);
+extern void RemoveAllTS(struct ieee80211_device* ieee);
+void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee);
+
+extern const long ieee80211_wlan_frequencies[];
+
+extern inline void ieee80211_increment_scans(struct ieee80211_device *ieee)
+{
+	ieee->scans++;
+}
+
+extern inline int ieee80211_get_scans(struct ieee80211_device *ieee)
+{
+	return ieee->scans;
+}
+
+static inline const char *escape_essid(const char *essid, u8 essid_len) {
+	static char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
+	const char *s = essid;
+	char *d = escaped;
+
+	if (ieee80211_is_empty_essid(essid, essid_len)) {
+		memcpy(escaped, "<hidden>", sizeof("<hidden>"));
+		return escaped;
+	}
+
+	essid_len = min(essid_len, (u8)IW_ESSID_MAX_SIZE);
+	while (essid_len--) {
+		if (*s == '\0') {
+			*d++ = '\\';
+			*d++ = '0';
+			s++;
+		} else {
+			*d++ = *s++;
+		}
+	}
+	*d = '\0';
+	return escaped;
+}
+
+/* For the function is more related to hardware setting, it's better to use the
+ * ieee handler to refer to it.
+ */
+extern short check_nic_enough_desc(struct net_device *dev, int queue_index);
+extern int ieee80211_data_xmit(struct sk_buff *skb, struct net_device *dev);
+extern int ieee80211_parse_info_param(struct ieee80211_device *ieee,
+		struct ieee80211_info_element *info_element,
+		u16 length,
+		struct ieee80211_network *network,
+		struct ieee80211_rx_stats *stats);
+
+void ieee80211_indicate_packets(struct ieee80211_device *ieee, struct ieee80211_rxb** prxbIndicateArray,u8  index);
+#define RT_ASOC_RETRY_LIMIT	5
+#endif /* IEEE80211_H */
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt.c
new file mode 100644
index 00000000000..199ee1695ad
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt.c
@@ -0,0 +1,273 @@
+/*
+ * Host AP crypto routines
+ *
+ * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+ * Portions Copyright (C) 2004, Intel Corporation <jketreno@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation. See README and COPYING for
+ * more details.
+ *
+ */
+
+//#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <asm/string.h>
+#include <asm/errno.h>
+
+#include "ieee80211.h"
+
+MODULE_AUTHOR("Jouni Malinen");
+MODULE_DESCRIPTION("HostAP crypto");
+MODULE_LICENSE("GPL");
+
+struct ieee80211_crypto_alg {
+	struct list_head list;
+	struct ieee80211_crypto_ops *ops;
+};
+
+
+struct ieee80211_crypto {
+	struct list_head algs;
+	spinlock_t lock;
+};
+
+static struct ieee80211_crypto *hcrypt;
+
+void ieee80211_crypt_deinit_entries(struct ieee80211_device *ieee,
+					   int force)
+{
+	struct list_head *ptr, *n;
+	struct ieee80211_crypt_data *entry;
+
+	for (ptr = ieee->crypt_deinit_list.next, n = ptr->next;
+	     ptr != &ieee->crypt_deinit_list; ptr = n, n = ptr->next) {
+		entry = list_entry(ptr, struct ieee80211_crypt_data, list);
+
+		if (atomic_read(&entry->refcnt) != 0 && !force)
+			continue;
+
+		list_del(ptr);
+
+		if (entry->ops) {
+			entry->ops->deinit(entry->priv);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+			module_put(entry->ops->owner);
+#else
+			__MOD_DEC_USE_COUNT(entry->ops->owner);
+#endif
+		}
+		kfree(entry);
+	}
+}
+
+void ieee80211_crypt_deinit_handler(unsigned long data)
+{
+	struct ieee80211_device *ieee = (struct ieee80211_device *)data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ieee->lock, flags);
+	ieee80211_crypt_deinit_entries(ieee, 0);
+	if (!list_empty(&ieee->crypt_deinit_list)) {
+		printk(KERN_DEBUG "%s: entries remaining in delayed crypt "
+		       "deletion list\n", ieee->dev->name);
+		ieee->crypt_deinit_timer.expires = jiffies + HZ;
+		add_timer(&ieee->crypt_deinit_timer);
+	}
+	spin_unlock_irqrestore(&ieee->lock, flags);
+
+}
+
+void ieee80211_crypt_delayed_deinit(struct ieee80211_device *ieee,
+				    struct ieee80211_crypt_data **crypt)
+{
+	struct ieee80211_crypt_data *tmp;
+	unsigned long flags;
+
+	if (*crypt == NULL)
+		return;
+
+	tmp = *crypt;
+	*crypt = NULL;
+
+	/* must not run ops->deinit() while there may be pending encrypt or
+	 * decrypt operations. Use a list of delayed deinits to avoid needing
+	 * locking. */
+
+	spin_lock_irqsave(&ieee->lock, flags);
+	list_add(&tmp->list, &ieee->crypt_deinit_list);
+	if (!timer_pending(&ieee->crypt_deinit_timer)) {
+		ieee->crypt_deinit_timer.expires = jiffies + HZ;
+		add_timer(&ieee->crypt_deinit_timer);
+	}
+	spin_unlock_irqrestore(&ieee->lock, flags);
+}
+
+int ieee80211_register_crypto_ops(struct ieee80211_crypto_ops *ops)
+{
+	unsigned long flags;
+	struct ieee80211_crypto_alg *alg;
+
+	if (hcrypt == NULL)
+		return -1;
+
+	alg = kmalloc(sizeof(*alg), GFP_KERNEL);
+	if (alg == NULL)
+		return -ENOMEM;
+
+	memset(alg, 0, sizeof(*alg));
+	alg->ops = ops;
+
+	spin_lock_irqsave(&hcrypt->lock, flags);
+	list_add(&alg->list, &hcrypt->algs);
+	spin_unlock_irqrestore(&hcrypt->lock, flags);
+
+	printk(KERN_DEBUG "ieee80211_crypt: registered algorithm '%s'\n",
+	       ops->name);
+
+	return 0;
+}
+
+int ieee80211_unregister_crypto_ops(struct ieee80211_crypto_ops *ops)
+{
+	unsigned long flags;
+	struct list_head *ptr;
+	struct ieee80211_crypto_alg *del_alg = NULL;
+
+	if (hcrypt == NULL)
+		return -1;
+
+	spin_lock_irqsave(&hcrypt->lock, flags);
+	for (ptr = hcrypt->algs.next; ptr != &hcrypt->algs; ptr = ptr->next) {
+		struct ieee80211_crypto_alg *alg =
+			(struct ieee80211_crypto_alg *) ptr;
+		if (alg->ops == ops) {
+			list_del(&alg->list);
+			del_alg = alg;
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&hcrypt->lock, flags);
+
+	if (del_alg) {
+		printk(KERN_DEBUG "ieee80211_crypt: unregistered algorithm "
+		       "'%s'\n", ops->name);
+		kfree(del_alg);
+	}
+
+	return del_alg ? 0 : -1;
+}
+
+
+struct ieee80211_crypto_ops * ieee80211_get_crypto_ops(const char *name)
+{
+	unsigned long flags;
+	struct list_head *ptr;
+	struct ieee80211_crypto_alg *found_alg = NULL;
+
+	if (hcrypt == NULL)
+		return NULL;
+
+	spin_lock_irqsave(&hcrypt->lock, flags);
+	for (ptr = hcrypt->algs.next; ptr != &hcrypt->algs; ptr = ptr->next) {
+		struct ieee80211_crypto_alg *alg =
+			(struct ieee80211_crypto_alg *) ptr;
+		if (strcmp(alg->ops->name, name) == 0) {
+			found_alg = alg;
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&hcrypt->lock, flags);
+
+	if (found_alg)
+		return found_alg->ops;
+	else
+		return NULL;
+}
+
+
+static void * ieee80211_crypt_null_init(int keyidx) { return (void *) 1; }
+static void ieee80211_crypt_null_deinit(void *priv) {}
+
+static struct ieee80211_crypto_ops ieee80211_crypt_null = {
+	.name			= "NULL",
+	.init			= ieee80211_crypt_null_init,
+	.deinit			= ieee80211_crypt_null_deinit,
+	.encrypt_mpdu		= NULL,
+	.decrypt_mpdu		= NULL,
+	.encrypt_msdu		= NULL,
+	.decrypt_msdu		= NULL,
+	.set_key		= NULL,
+	.get_key		= NULL,
+	.extra_prefix_len	= 0,
+	.extra_postfix_len	= 0,
+	.owner			= THIS_MODULE,
+};
+
+
+static int __init ieee80211_crypto_init(void)
+{
+	int ret = -ENOMEM;
+
+	hcrypt = kmalloc(sizeof(*hcrypt), GFP_KERNEL);
+	if (!hcrypt)
+		goto out;
+
+	memset(hcrypt, 0, sizeof(*hcrypt));
+	INIT_LIST_HEAD(&hcrypt->algs);
+	spin_lock_init(&hcrypt->lock);
+
+	ret = ieee80211_register_crypto_ops(&ieee80211_crypt_null);
+	if (ret < 0) {
+		kfree(hcrypt);
+		hcrypt = NULL;
+	}
+out:
+	return ret;
+}
+
+
+static void __exit ieee80211_crypto_deinit(void)
+{
+	struct list_head *ptr, *n;
+
+	if (hcrypt == NULL)
+		return;
+
+	for (ptr = hcrypt->algs.next, n = ptr->next; ptr != &hcrypt->algs;
+	     ptr = n, n = ptr->next) {
+		struct ieee80211_crypto_alg *alg =
+			(struct ieee80211_crypto_alg *) ptr;
+		list_del(ptr);
+		printk(KERN_DEBUG "ieee80211_crypt: unregistered algorithm "
+		       "'%s' (deinit)\n", alg->ops->name);
+		kfree(alg);
+	}
+
+	kfree(hcrypt);
+}
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+EXPORT_SYMBOL(ieee80211_crypt_deinit_entries);
+EXPORT_SYMBOL(ieee80211_crypt_deinit_handler);
+EXPORT_SYMBOL(ieee80211_crypt_delayed_deinit);
+
+EXPORT_SYMBOL(ieee80211_register_crypto_ops);
+EXPORT_SYMBOL(ieee80211_unregister_crypto_ops);
+EXPORT_SYMBOL(ieee80211_get_crypto_ops);
+#else
+EXPORT_SYMBOL_NOVERS(ieee80211_crypt_deinit_entries);
+EXPORT_SYMBOL_NOVERS(ieee80211_crypt_deinit_handler);
+EXPORT_SYMBOL_NOVERS(ieee80211_crypt_delayed_deinit);
+
+EXPORT_SYMBOL_NOVERS(ieee80211_register_crypto_ops);
+EXPORT_SYMBOL_NOVERS(ieee80211_unregister_crypto_ops);
+EXPORT_SYMBOL_NOVERS(ieee80211_get_crypto_ops);
+#endif
+
+module_init(ieee80211_crypto_init);
+module_exit(ieee80211_crypto_deinit);
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt.h b/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt.h
new file mode 100644
index 00000000000..a84df4b7648
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt.h
@@ -0,0 +1,93 @@
+/*
+ * Original code based on Host AP (software wireless LAN access point) driver
+ * for Intersil Prism2/2.5/3.
+ *
+ * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+ * <jkmaline@cc.hut.fi>
+ * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+ *
+ * Adaption to a generic IEEE 802.11 stack by James Ketrenos
+ * <jketreno@linux.intel.com>
+ *
+ * Copyright (c) 2004, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation. See README and COPYING for
+ * more details.
+ */
+
+/*
+ * This file defines the interface to the ieee80211 crypto module.
+ */
+#ifndef IEEE80211_CRYPT_H
+#define IEEE80211_CRYPT_H
+
+#include <linux/skbuff.h>
+
+struct ieee80211_crypto_ops {
+	const char *name;
+
+	/* init new crypto context (e.g., allocate private data space,
+	 * select IV, etc.); returns NULL on failure or pointer to allocated
+	 * private data on success */
+	void * (*init)(int keyidx);
+
+	/* deinitialize crypto context and free allocated private data */
+	void (*deinit)(void *priv);
+
+	/* encrypt/decrypt return < 0 on error or >= 0 on success. The return
+	 * value from decrypt_mpdu is passed as the keyidx value for
+	 * decrypt_msdu. skb must have enough head and tail room for the
+	 * encryption; if not, error will be returned; these functions are
+	 * called for all MPDUs (i.e., fragments).
+	 */
+	int (*encrypt_mpdu)(struct sk_buff *skb, int hdr_len, void *priv);
+	int (*decrypt_mpdu)(struct sk_buff *skb, int hdr_len, void *priv);
+
+	/* These functions are called for full MSDUs, i.e. full frames.
+	 * These can be NULL if full MSDU operations are not needed. */
+	int (*encrypt_msdu)(struct sk_buff *skb, int hdr_len, void *priv);
+	int (*decrypt_msdu)(struct sk_buff *skb, int keyidx, int hdr_len,
+			    void *priv);
+
+	int (*set_key)(void *key, int len, u8 *seq, void *priv);
+	int (*get_key)(void *key, int len, u8 *seq, void *priv);
+
+	/* procfs handler for printing out key information and possible
+	 * statistics */
+	char * (*print_stats)(char *p, void *priv);
+
+	/* maximum number of bytes added by encryption; encrypt buf is
+	 * allocated with extra_prefix_len bytes, copy of in_buf, and
+	 * extra_postfix_len; encrypt need not use all this space, but
+	 * the result must start at the beginning of the buffer and correct
+	 * length must be returned */
+	int extra_prefix_len, extra_postfix_len;
+
+	struct module *owner;
+};
+
+struct ieee80211_crypt_data {
+	struct list_head list; /* delayed deletion list */
+	struct ieee80211_crypto_ops *ops;
+	void *priv;
+	atomic_t refcnt;
+};
+
+int ieee80211_register_crypto_ops(struct ieee80211_crypto_ops *ops);
+int ieee80211_unregister_crypto_ops(struct ieee80211_crypto_ops *ops);
+struct ieee80211_crypto_ops * ieee80211_get_crypto_ops(const char *name);
+void ieee80211_crypt_deinit_entries(struct ieee80211_device *, int);
+void ieee80211_crypt_deinit_handler(unsigned long);
+void ieee80211_crypt_delayed_deinit(struct ieee80211_device *ieee,
+				    struct ieee80211_crypt_data **crypt);
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
+#define offset_in_page(p) ((unsigned long)(p) & ~PAGE_MASK)
+#endif
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,31))
+#define crypto_alloc_tfm crypto_alloc_tfm_rsl
+#define crypto_free_tfm crypto_free_tfm_rsl
+#endif
+
+#endif
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt_ccmp.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt_ccmp.c
new file mode 100644
index 00000000000..a86c26eceb3
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt_ccmp.c
@@ -0,0 +1,534 @@
+/*
+ * Host AP crypt: host-based CCMP encryption implementation for Host AP driver
+ *
+ * Copyright (c) 2003-2004, Jouni Malinen <jkmaline@cc.hut.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation. See README and COPYING for
+ * more details.
+ */
+
+//#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/if_ether.h>
+#include <linux/if_arp.h>
+#include <asm/string.h>
+#include <linux/wireless.h>
+
+#include "ieee80211.h"
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
+#include "rtl_crypto.h"
+#else
+#include <linux/crypto.h>
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
+    #include <asm/scatterlist.h>
+#else
+    #include <linux/scatterlist.h>
+#endif
+//#include <asm/scatterlist.h>
+
+MODULE_AUTHOR("Jouni Malinen");
+MODULE_DESCRIPTION("Host AP crypt: CCMP");
+MODULE_LICENSE("GPL");
+
+#ifndef OPENSUSE_SLED
+#define OPENSUSE_SLED 0
+#endif
+
+#define AES_BLOCK_LEN 16
+#define CCMP_HDR_LEN 8
+#define CCMP_MIC_LEN 8
+#define CCMP_TK_LEN 16
+#define CCMP_PN_LEN 6
+
+struct ieee80211_ccmp_data {
+	u8 key[CCMP_TK_LEN];
+	int key_set;
+
+	u8 tx_pn[CCMP_PN_LEN];
+	u8 rx_pn[CCMP_PN_LEN];
+
+	u32 dot11RSNAStatsCCMPFormatErrors;
+	u32 dot11RSNAStatsCCMPReplays;
+	u32 dot11RSNAStatsCCMPDecryptErrors;
+
+	int key_idx;
+
+	struct crypto_tfm *tfm;
+
+	/* scratch buffers for virt_to_page() (crypto API) */
+	u8 tx_b0[AES_BLOCK_LEN], tx_b[AES_BLOCK_LEN],
+		tx_e[AES_BLOCK_LEN], tx_s0[AES_BLOCK_LEN];
+	u8 rx_b0[AES_BLOCK_LEN], rx_b[AES_BLOCK_LEN], rx_a[AES_BLOCK_LEN];
+};
+
+void ieee80211_ccmp_aes_encrypt(struct crypto_tfm *tfm,
+			     const u8 pt[16], u8 ct[16])
+{
+#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
+	struct scatterlist src, dst;
+
+	src.page = virt_to_page(pt);
+	src.offset = offset_in_page(pt);
+	src.length = AES_BLOCK_LEN;
+
+	dst.page = virt_to_page(ct);
+	dst.offset = offset_in_page(ct);
+	dst.length = AES_BLOCK_LEN;
+
+	crypto_cipher_encrypt(tfm, &dst, &src, AES_BLOCK_LEN);
+#else
+	crypto_cipher_encrypt_one((void*)tfm, ct, pt);
+#endif
+}
+
+static void * ieee80211_ccmp_init(int key_idx)
+{
+	struct ieee80211_ccmp_data *priv;
+
+	priv = kmalloc(sizeof(*priv), GFP_ATOMIC);
+	if (priv == NULL)
+		goto fail;
+	memset(priv, 0, sizeof(*priv));
+	priv->key_idx = key_idx;
+
+#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
+	priv->tfm = crypto_alloc_tfm("aes", 0);
+	if (priv->tfm == NULL) {
+		printk(KERN_DEBUG "ieee80211_crypt_ccmp: could not allocate "
+		       "crypto API aes\n");
+		goto fail;
+	}
+       #else
+       priv->tfm = (void*)crypto_alloc_cipher("aes", 0, CRYPTO_ALG_ASYNC);
+	if (IS_ERR(priv->tfm)) {
+		printk(KERN_DEBUG "ieee80211_crypt_ccmp: could not allocate "
+		       "crypto API aes\n");
+		priv->tfm = NULL;
+		goto fail;
+	}
+	#endif
+	return priv;
+
+fail:
+	if (priv) {
+		if (priv->tfm)
+			#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21))
+			crypto_free_tfm(priv->tfm);
+                    #else
+			crypto_free_cipher((void*)priv->tfm);
+		      #endif
+		kfree(priv);
+	}
+
+	return NULL;
+}
+
+
+static void ieee80211_ccmp_deinit(void *priv)
+{
+	struct ieee80211_ccmp_data *_priv = priv;
+	if (_priv && _priv->tfm)
+#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21))
+		crypto_free_tfm(_priv->tfm);
+#else
+		crypto_free_cipher((void*)_priv->tfm);
+#endif
+	kfree(priv);
+}
+
+
+static inline void xor_block(u8 *b, u8 *a, size_t len)
+{
+	int i;
+	for (i = 0; i < len; i++)
+		b[i] ^= a[i];
+}
+
+
+
+static void ccmp_init_blocks(struct crypto_tfm *tfm,
+			     struct ieee80211_hdr_4addr *hdr,
+			     u8 *pn, size_t dlen, u8 *b0, u8 *auth,
+			     u8 *s0)
+{
+	u8 *pos, qc = 0;
+	size_t aad_len;
+	u16 fc;
+	int a4_included, qc_included;
+	u8 aad[2 * AES_BLOCK_LEN];
+
+	fc = le16_to_cpu(hdr->frame_ctl);
+	a4_included = ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) ==
+		       (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS));
+	/*
+	qc_included = ((WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_DATA) &&
+		       (WLAN_FC_GET_STYPE(fc) & 0x08));
+        */
+	// fixed by David :2006.9.6
+	qc_included = ((WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_DATA) &&
+		       (WLAN_FC_GET_STYPE(fc) & 0x80));
+	aad_len = 22;
+	if (a4_included)
+		aad_len += 6;
+	if (qc_included) {
+		pos = (u8 *) &hdr->addr4;
+		if (a4_included)
+			pos += 6;
+		qc = *pos & 0x0f;
+		aad_len += 2;
+	}
+	/* CCM Initial Block:
+	 * Flag (Include authentication header, M=3 (8-octet MIC),
+	 *       L=1 (2-octet Dlen))
+	 * Nonce: 0x00 | A2 | PN
+	 * Dlen */
+	b0[0] = 0x59;
+	b0[1] = qc;
+	memcpy(b0 + 2, hdr->addr2, ETH_ALEN);
+	memcpy(b0 + 8, pn, CCMP_PN_LEN);
+	b0[14] = (dlen >> 8) & 0xff;
+	b0[15] = dlen & 0xff;
+
+	/* AAD:
+	 * FC with bits 4..6 and 11..13 masked to zero; 14 is always one
+	 * A1 | A2 | A3
+	 * SC with bits 4..15 (seq#) masked to zero
+	 * A4 (if present)
+	 * QC (if present)
+	 */
+	pos = (u8 *) hdr;
+	aad[0] = 0; /* aad_len >> 8 */
+	aad[1] = aad_len & 0xff;
+	aad[2] = pos[0] & 0x8f;
+	aad[3] = pos[1] & 0xc7;
+	memcpy(aad + 4, hdr->addr1, 3 * ETH_ALEN);
+	pos = (u8 *) &hdr->seq_ctl;
+	aad[22] = pos[0] & 0x0f;
+	aad[23] = 0; /* all bits masked */
+	memset(aad + 24, 0, 8);
+	if (a4_included)
+		memcpy(aad + 24, hdr->addr4, ETH_ALEN);
+	if (qc_included) {
+		aad[a4_included ? 30 : 24] = qc;
+		/* rest of QC masked */
+	}
+
+	/* Start with the first block and AAD */
+	ieee80211_ccmp_aes_encrypt(tfm, b0, auth);
+	xor_block(auth, aad, AES_BLOCK_LEN);
+	ieee80211_ccmp_aes_encrypt(tfm, auth, auth);
+	xor_block(auth, &aad[AES_BLOCK_LEN], AES_BLOCK_LEN);
+	ieee80211_ccmp_aes_encrypt(tfm, auth, auth);
+	b0[0] &= 0x07;
+	b0[14] = b0[15] = 0;
+	ieee80211_ccmp_aes_encrypt(tfm, b0, s0);
+}
+
+
+
+static int ieee80211_ccmp_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
+{
+	struct ieee80211_ccmp_data *key = priv;
+	int data_len, i;
+	u8 *pos;
+	struct ieee80211_hdr_4addr *hdr;
+	cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
+
+	if (skb_headroom(skb) < CCMP_HDR_LEN ||
+	    skb_tailroom(skb) < CCMP_MIC_LEN ||
+	    skb->len < hdr_len)
+		return -1;
+
+	data_len = skb->len - hdr_len;
+	pos = skb_push(skb, CCMP_HDR_LEN);
+	memmove(pos, pos + CCMP_HDR_LEN, hdr_len);
+	pos += hdr_len;
+//	mic = skb_put(skb, CCMP_MIC_LEN);
+
+	i = CCMP_PN_LEN - 1;
+	while (i >= 0) {
+		key->tx_pn[i]++;
+		if (key->tx_pn[i] != 0)
+			break;
+		i--;
+	}
+
+	*pos++ = key->tx_pn[5];
+	*pos++ = key->tx_pn[4];
+	*pos++ = 0;
+	*pos++ = (key->key_idx << 6) | (1 << 5) /* Ext IV included */;
+	*pos++ = key->tx_pn[3];
+	*pos++ = key->tx_pn[2];
+	*pos++ = key->tx_pn[1];
+	*pos++ = key->tx_pn[0];
+
+
+	hdr = (struct ieee80211_hdr_4addr *) skb->data;
+	if (!tcb_desc->bHwSec)
+	{
+		int blocks, last, len;
+		u8 *mic;
+		u8 *b0 = key->tx_b0;
+		u8 *b = key->tx_b;
+		u8 *e = key->tx_e;
+		u8 *s0 = key->tx_s0;
+
+		//mic is moved to here by john
+		mic = skb_put(skb, CCMP_MIC_LEN);
+
+		ccmp_init_blocks(key->tfm, hdr, key->tx_pn, data_len, b0, b, s0);
+
+		blocks = (data_len + AES_BLOCK_LEN - 1) / AES_BLOCK_LEN;
+		last = data_len % AES_BLOCK_LEN;
+
+		for (i = 1; i <= blocks; i++) {
+			len = (i == blocks && last) ? last : AES_BLOCK_LEN;
+			/* Authentication */
+			xor_block(b, pos, len);
+			ieee80211_ccmp_aes_encrypt(key->tfm, b, b);
+			/* Encryption, with counter */
+			b0[14] = (i >> 8) & 0xff;
+			b0[15] = i & 0xff;
+			ieee80211_ccmp_aes_encrypt(key->tfm, b0, e);
+			xor_block(pos, e, len);
+			pos += len;
+		}
+
+		for (i = 0; i < CCMP_MIC_LEN; i++)
+			mic[i] = b[i] ^ s0[i];
+	}
+	return 0;
+}
+
+
+static int ieee80211_ccmp_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
+{
+	struct ieee80211_ccmp_data *key = priv;
+	u8 keyidx, *pos;
+	struct ieee80211_hdr_4addr *hdr;
+	cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
+	u8 pn[6];
+
+	if (skb->len < hdr_len + CCMP_HDR_LEN + CCMP_MIC_LEN) {
+		key->dot11RSNAStatsCCMPFormatErrors++;
+		return -1;
+	}
+
+	hdr = (struct ieee80211_hdr_4addr *) skb->data;
+	pos = skb->data + hdr_len;
+	keyidx = pos[3];
+	if (!(keyidx & (1 << 5))) {
+		if (net_ratelimit()) {
+			printk(KERN_DEBUG "CCMP: received packet without ExtIV"
+			       " flag from " MAC_FMT "\n", MAC_ARG(hdr->addr2));
+		}
+		key->dot11RSNAStatsCCMPFormatErrors++;
+		return -2;
+	}
+	keyidx >>= 6;
+	if (key->key_idx != keyidx) {
+		printk(KERN_DEBUG "CCMP: RX tkey->key_idx=%d frame "
+		       "keyidx=%d priv=%p\n", key->key_idx, keyidx, priv);
+		return -6;
+	}
+	if (!key->key_set) {
+		if (net_ratelimit()) {
+			printk(KERN_DEBUG "CCMP: received packet from " MAC_FMT
+			       " with keyid=%d that does not have a configured"
+			       " key\n", MAC_ARG(hdr->addr2), keyidx);
+		}
+		return -3;
+	}
+
+	pn[0] = pos[7];
+	pn[1] = pos[6];
+	pn[2] = pos[5];
+	pn[3] = pos[4];
+	pn[4] = pos[1];
+	pn[5] = pos[0];
+	pos += 8;
+
+	if (memcmp(pn, key->rx_pn, CCMP_PN_LEN) <= 0) {
+		if (net_ratelimit()) {
+			printk(KERN_DEBUG "CCMP: replay detected: STA=" MAC_FMT
+			       " previous PN %02x%02x%02x%02x%02x%02x "
+			       "received PN %02x%02x%02x%02x%02x%02x\n",
+			       MAC_ARG(hdr->addr2), MAC_ARG(key->rx_pn),
+			       MAC_ARG(pn));
+		}
+		key->dot11RSNAStatsCCMPReplays++;
+		return -4;
+	}
+	if (!tcb_desc->bHwSec)
+	{
+		size_t data_len = skb->len - hdr_len - CCMP_HDR_LEN - CCMP_MIC_LEN;
+		u8 *mic = skb->data + skb->len - CCMP_MIC_LEN;
+		u8 *b0 = key->rx_b0;
+		u8 *b = key->rx_b;
+		u8 *a = key->rx_a;
+		int i, blocks, last, len;
+
+
+		ccmp_init_blocks(key->tfm, hdr, pn, data_len, b0, a, b);
+		xor_block(mic, b, CCMP_MIC_LEN);
+
+		blocks = (data_len + AES_BLOCK_LEN - 1) / AES_BLOCK_LEN;
+		last = data_len % AES_BLOCK_LEN;
+
+		for (i = 1; i <= blocks; i++) {
+			len = (i == blocks && last) ? last : AES_BLOCK_LEN;
+			/* Decrypt, with counter */
+			b0[14] = (i >> 8) & 0xff;
+			b0[15] = i & 0xff;
+			ieee80211_ccmp_aes_encrypt(key->tfm, b0, b);
+			xor_block(pos, b, len);
+			/* Authentication */
+			xor_block(a, pos, len);
+			ieee80211_ccmp_aes_encrypt(key->tfm, a, a);
+			pos += len;
+		}
+
+		if (memcmp(mic, a, CCMP_MIC_LEN) != 0) {
+			if (net_ratelimit()) {
+				printk(KERN_DEBUG "CCMP: decrypt failed: STA="
+				MAC_FMT "\n", MAC_ARG(hdr->addr2));
+			}
+			key->dot11RSNAStatsCCMPDecryptErrors++;
+			return -5;
+		}
+
+		memcpy(key->rx_pn, pn, CCMP_PN_LEN);
+	}
+	/* Remove hdr and MIC */
+	memmove(skb->data + CCMP_HDR_LEN, skb->data, hdr_len);
+	skb_pull(skb, CCMP_HDR_LEN);
+	skb_trim(skb, skb->len - CCMP_MIC_LEN);
+
+	return keyidx;
+}
+
+
+static int ieee80211_ccmp_set_key(void *key, int len, u8 *seq, void *priv)
+{
+	struct ieee80211_ccmp_data *data = priv;
+	int keyidx;
+	struct crypto_tfm *tfm = data->tfm;
+
+	keyidx = data->key_idx;
+	memset(data, 0, sizeof(*data));
+	data->key_idx = keyidx;
+	data->tfm = tfm;
+	if (len == CCMP_TK_LEN) {
+		memcpy(data->key, key, CCMP_TK_LEN);
+		data->key_set = 1;
+		if (seq) {
+			data->rx_pn[0] = seq[5];
+			data->rx_pn[1] = seq[4];
+			data->rx_pn[2] = seq[3];
+			data->rx_pn[3] = seq[2];
+			data->rx_pn[4] = seq[1];
+			data->rx_pn[5] = seq[0];
+		}
+		crypto_cipher_setkey((void*)data->tfm, data->key, CCMP_TK_LEN);
+	} else if (len == 0)
+		data->key_set = 0;
+	else
+		return -1;
+
+	return 0;
+}
+
+
+static int ieee80211_ccmp_get_key(void *key, int len, u8 *seq, void *priv)
+{
+	struct ieee80211_ccmp_data *data = priv;
+
+	if (len < CCMP_TK_LEN)
+		return -1;
+
+	if (!data->key_set)
+		return 0;
+	memcpy(key, data->key, CCMP_TK_LEN);
+
+	if (seq) {
+		seq[0] = data->tx_pn[5];
+		seq[1] = data->tx_pn[4];
+		seq[2] = data->tx_pn[3];
+		seq[3] = data->tx_pn[2];
+		seq[4] = data->tx_pn[1];
+		seq[5] = data->tx_pn[0];
+	}
+
+	return CCMP_TK_LEN;
+}
+
+
+static char * ieee80211_ccmp_print_stats(char *p, void *priv)
+{
+	struct ieee80211_ccmp_data *ccmp = priv;
+	p += sprintf(p, "key[%d] alg=CCMP key_set=%d "
+		     "tx_pn=%02x%02x%02x%02x%02x%02x "
+		     "rx_pn=%02x%02x%02x%02x%02x%02x "
+		     "format_errors=%d replays=%d decrypt_errors=%d\n",
+		     ccmp->key_idx, ccmp->key_set,
+		     MAC_ARG(ccmp->tx_pn), MAC_ARG(ccmp->rx_pn),
+		     ccmp->dot11RSNAStatsCCMPFormatErrors,
+		     ccmp->dot11RSNAStatsCCMPReplays,
+		     ccmp->dot11RSNAStatsCCMPDecryptErrors);
+
+	return p;
+}
+
+void ieee80211_ccmp_null(void)
+{
+//    printk("============>%s()\n", __FUNCTION__);
+	return;
+}
+
+static struct ieee80211_crypto_ops ieee80211_crypt_ccmp = {
+	.name			= "CCMP",
+	.init			= ieee80211_ccmp_init,
+	.deinit			= ieee80211_ccmp_deinit,
+	.encrypt_mpdu		= ieee80211_ccmp_encrypt,
+	.decrypt_mpdu		= ieee80211_ccmp_decrypt,
+	.encrypt_msdu		= NULL,
+	.decrypt_msdu		= NULL,
+	.set_key		= ieee80211_ccmp_set_key,
+	.get_key		= ieee80211_ccmp_get_key,
+	.print_stats		= ieee80211_ccmp_print_stats,
+	.extra_prefix_len	= CCMP_HDR_LEN,
+	.extra_postfix_len	= CCMP_MIC_LEN,
+	.owner			= THIS_MODULE,
+};
+
+
+static int __init ieee80211_crypto_ccmp_init(void)
+{
+	return ieee80211_register_crypto_ops(&ieee80211_crypt_ccmp);
+}
+
+
+static void __exit ieee80211_crypto_ccmp_exit(void)
+{
+	ieee80211_unregister_crypto_ops(&ieee80211_crypt_ccmp);
+}
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+EXPORT_SYMBOL(ieee80211_ccmp_null);
+#else
+EXPORT_SYMBOL_NOVERS(ieee80211_ccmp_null);
+#endif
+
+module_init(ieee80211_crypto_ccmp_init);
+module_exit(ieee80211_crypto_ccmp_exit);
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt_tkip.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt_tkip.c
new file mode 100644
index 00000000000..b031b649524
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt_tkip.c
@@ -0,0 +1,1034 @@
+/*
+ * Host AP crypt: host-based TKIP encryption implementation for Host AP driver
+ *
+ * Copyright (c) 2003-2004, Jouni Malinen <jkmaline@cc.hut.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation. See README and COPYING for
+ * more details.
+ */
+
+//#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/if_ether.h>
+#include <linux/if_arp.h>
+#include <asm/string.h>
+
+#include "ieee80211.h"
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,20))
+//#include "crypto_compat.h"
+#endif
+
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
+#include "rtl_crypto.h"
+#else
+#include <linux/crypto.h>
+#endif
+//#include <asm/scatterlist.h>
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
+    #include <asm/scatterlist.h>
+#else
+        #include <linux/scatterlist.h>
+#endif
+
+#include <linux/crc32.h>
+
+MODULE_AUTHOR("Jouni Malinen");
+MODULE_DESCRIPTION("Host AP crypt: TKIP");
+MODULE_LICENSE("GPL");
+
+#ifndef OPENSUSE_SLED
+#define OPENSUSE_SLED 0
+#endif
+
+struct ieee80211_tkip_data {
+#define TKIP_KEY_LEN 32
+	u8 key[TKIP_KEY_LEN];
+	int key_set;
+
+	u32 tx_iv32;
+	u16 tx_iv16;
+	u16 tx_ttak[5];
+	int tx_phase1_done;
+
+	u32 rx_iv32;
+	u16 rx_iv16;
+	u16 rx_ttak[5];
+	int rx_phase1_done;
+	u32 rx_iv32_new;
+	u16 rx_iv16_new;
+
+	u32 dot11RSNAStatsTKIPReplays;
+	u32 dot11RSNAStatsTKIPICVErrors;
+	u32 dot11RSNAStatsTKIPLocalMICFailures;
+
+	int key_idx;
+#if((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)) || (OPENSUSE_SLED))
+	struct crypto_blkcipher *rx_tfm_arc4;
+	struct crypto_hash *rx_tfm_michael;
+	struct crypto_blkcipher *tx_tfm_arc4;
+	struct crypto_hash *tx_tfm_michael;
+#else
+	struct crypto_tfm *tx_tfm_arc4;
+	struct crypto_tfm *tx_tfm_michael;
+	struct crypto_tfm *rx_tfm_arc4;
+	struct crypto_tfm *rx_tfm_michael;
+#endif
+	/* scratch buffers for virt_to_page() (crypto API) */
+	u8 rx_hdr[16], tx_hdr[16];
+};
+
+static void * ieee80211_tkip_init(int key_idx)
+{
+	struct ieee80211_tkip_data *priv;
+
+	priv = kmalloc(sizeof(*priv), GFP_ATOMIC);
+	if (priv == NULL)
+		goto fail;
+	memset(priv, 0, sizeof(*priv));
+	priv->key_idx = key_idx;
+#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
+	priv->tx_tfm_arc4 = crypto_alloc_tfm("arc4", 0);
+	if (priv->tx_tfm_arc4 == NULL) {
+		printk(KERN_DEBUG "ieee80211_crypt_tkip: could not allocate "
+				"crypto API arc4\n");
+		goto fail;
+	}
+
+	priv->tx_tfm_michael = crypto_alloc_tfm("michael_mic", 0);
+	if (priv->tx_tfm_michael == NULL) {
+		printk(KERN_DEBUG "ieee80211_crypt_tkip: could not allocate "
+				"crypto API michael_mic\n");
+		goto fail;
+	}
+
+	priv->rx_tfm_arc4 = crypto_alloc_tfm("arc4", 0);
+	if (priv->rx_tfm_arc4 == NULL) {
+		printk(KERN_DEBUG "ieee80211_crypt_tkip: could not allocate "
+				"crypto API arc4\n");
+		goto fail;
+	}
+
+	priv->rx_tfm_michael = crypto_alloc_tfm("michael_mic", 0);
+	if (priv->rx_tfm_michael == NULL) {
+		printk(KERN_DEBUG "ieee80211_crypt_tkip: could not allocate "
+				"crypto API michael_mic\n");
+		goto fail;
+	}
+#else
+	priv->tx_tfm_arc4 = crypto_alloc_blkcipher("ecb(arc4)", 0,
+			CRYPTO_ALG_ASYNC);
+	if (IS_ERR(priv->tx_tfm_arc4)) {
+		printk(KERN_DEBUG "ieee80211_crypt_tkip: could not allocate "
+				"crypto API arc4\n");
+		priv->tx_tfm_arc4 = NULL;
+		goto fail;
+	}
+
+	priv->tx_tfm_michael = crypto_alloc_hash("michael_mic", 0,
+			CRYPTO_ALG_ASYNC);
+	if (IS_ERR(priv->tx_tfm_michael)) {
+		printk(KERN_DEBUG "ieee80211_crypt_tkip: could not allocate "
+				"crypto API michael_mic\n");
+		priv->tx_tfm_michael = NULL;
+		goto fail;
+	}
+
+	priv->rx_tfm_arc4 = crypto_alloc_blkcipher("ecb(arc4)", 0,
+			CRYPTO_ALG_ASYNC);
+	if (IS_ERR(priv->rx_tfm_arc4)) {
+		printk(KERN_DEBUG "ieee80211_crypt_tkip: could not allocate "
+				"crypto API arc4\n");
+		priv->rx_tfm_arc4 = NULL;
+		goto fail;
+	}
+
+	priv->rx_tfm_michael = crypto_alloc_hash("michael_mic", 0,
+			CRYPTO_ALG_ASYNC);
+	if (IS_ERR(priv->rx_tfm_michael)) {
+		printk(KERN_DEBUG "ieee80211_crypt_tkip: could not allocate "
+				"crypto API michael_mic\n");
+		priv->rx_tfm_michael = NULL;
+		goto fail;
+	}
+#endif
+	return priv;
+
+fail:
+	if (priv) {
+#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
+		if (priv->tx_tfm_michael)
+			crypto_free_tfm(priv->tx_tfm_michael);
+		if (priv->tx_tfm_arc4)
+			crypto_free_tfm(priv->tx_tfm_arc4);
+		if (priv->rx_tfm_michael)
+			crypto_free_tfm(priv->rx_tfm_michael);
+		if (priv->rx_tfm_arc4)
+			crypto_free_tfm(priv->rx_tfm_arc4);
+
+#else
+		if (priv->tx_tfm_michael)
+			crypto_free_hash(priv->tx_tfm_michael);
+		if (priv->tx_tfm_arc4)
+			crypto_free_blkcipher(priv->tx_tfm_arc4);
+		if (priv->rx_tfm_michael)
+			crypto_free_hash(priv->rx_tfm_michael);
+		if (priv->rx_tfm_arc4)
+			crypto_free_blkcipher(priv->rx_tfm_arc4);
+#endif
+		kfree(priv);
+	}
+
+	return NULL;
+}
+
+
+static void ieee80211_tkip_deinit(void *priv)
+{
+	struct ieee80211_tkip_data *_priv = priv;
+#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
+	if (_priv->tx_tfm_michael)
+		crypto_free_tfm(_priv->tx_tfm_michael);
+	if (_priv->tx_tfm_arc4)
+		crypto_free_tfm(_priv->tx_tfm_arc4);
+	if (_priv->rx_tfm_michael)
+		crypto_free_tfm(_priv->rx_tfm_michael);
+	if (_priv->rx_tfm_arc4)
+		crypto_free_tfm(_priv->rx_tfm_arc4);
+#else
+	if (_priv) {
+		if (_priv->tx_tfm_michael)
+			crypto_free_hash(_priv->tx_tfm_michael);
+		if (_priv->tx_tfm_arc4)
+			crypto_free_blkcipher(_priv->tx_tfm_arc4);
+		if (_priv->rx_tfm_michael)
+			crypto_free_hash(_priv->rx_tfm_michael);
+		if (_priv->rx_tfm_arc4)
+			crypto_free_blkcipher(_priv->rx_tfm_arc4);
+	}
+#endif
+	kfree(priv);
+}
+
+
+static inline u16 RotR1(u16 val)
+{
+	return (val >> 1) | (val << 15);
+}
+
+
+static inline u8 Lo8(u16 val)
+{
+	return val & 0xff;
+}
+
+
+static inline u8 Hi8(u16 val)
+{
+	return val >> 8;
+}
+
+
+static inline u16 Lo16(u32 val)
+{
+	return val & 0xffff;
+}
+
+
+static inline u16 Hi16(u32 val)
+{
+	return val >> 16;
+}
+
+
+static inline u16 Mk16(u8 hi, u8 lo)
+{
+	return lo | (((u16) hi) << 8);
+}
+
+
+static inline u16 Mk16_le(u16 *v)
+{
+	return le16_to_cpu(*v);
+}
+
+
+static const u16 Sbox[256] =
+{
+	0xC6A5, 0xF884, 0xEE99, 0xF68D, 0xFF0D, 0xD6BD, 0xDEB1, 0x9154,
+	0x6050, 0x0203, 0xCEA9, 0x567D, 0xE719, 0xB562, 0x4DE6, 0xEC9A,
+	0x8F45, 0x1F9D, 0x8940, 0xFA87, 0xEF15, 0xB2EB, 0x8EC9, 0xFB0B,
+	0x41EC, 0xB367, 0x5FFD, 0x45EA, 0x23BF, 0x53F7, 0xE496, 0x9B5B,
+	0x75C2, 0xE11C, 0x3DAE, 0x4C6A, 0x6C5A, 0x7E41, 0xF502, 0x834F,
+	0x685C, 0x51F4, 0xD134, 0xF908, 0xE293, 0xAB73, 0x6253, 0x2A3F,
+	0x080C, 0x9552, 0x4665, 0x9D5E, 0x3028, 0x37A1, 0x0A0F, 0x2FB5,
+	0x0E09, 0x2436, 0x1B9B, 0xDF3D, 0xCD26, 0x4E69, 0x7FCD, 0xEA9F,
+	0x121B, 0x1D9E, 0x5874, 0x342E, 0x362D, 0xDCB2, 0xB4EE, 0x5BFB,
+	0xA4F6, 0x764D, 0xB761, 0x7DCE, 0x527B, 0xDD3E, 0x5E71, 0x1397,
+	0xA6F5, 0xB968, 0x0000, 0xC12C, 0x4060, 0xE31F, 0x79C8, 0xB6ED,
+	0xD4BE, 0x8D46, 0x67D9, 0x724B, 0x94DE, 0x98D4, 0xB0E8, 0x854A,
+	0xBB6B, 0xC52A, 0x4FE5, 0xED16, 0x86C5, 0x9AD7, 0x6655, 0x1194,
+	0x8ACF, 0xE910, 0x0406, 0xFE81, 0xA0F0, 0x7844, 0x25BA, 0x4BE3,
+	0xA2F3, 0x5DFE, 0x80C0, 0x058A, 0x3FAD, 0x21BC, 0x7048, 0xF104,
+	0x63DF, 0x77C1, 0xAF75, 0x4263, 0x2030, 0xE51A, 0xFD0E, 0xBF6D,
+	0x814C, 0x1814, 0x2635, 0xC32F, 0xBEE1, 0x35A2, 0x88CC, 0x2E39,
+	0x9357, 0x55F2, 0xFC82, 0x7A47, 0xC8AC, 0xBAE7, 0x322B, 0xE695,
+	0xC0A0, 0x1998, 0x9ED1, 0xA37F, 0x4466, 0x547E, 0x3BAB, 0x0B83,
+	0x8CCA, 0xC729, 0x6BD3, 0x283C, 0xA779, 0xBCE2, 0x161D, 0xAD76,
+	0xDB3B, 0x6456, 0x744E, 0x141E, 0x92DB, 0x0C0A, 0x486C, 0xB8E4,
+	0x9F5D, 0xBD6E, 0x43EF, 0xC4A6, 0x39A8, 0x31A4, 0xD337, 0xF28B,
+	0xD532, 0x8B43, 0x6E59, 0xDAB7, 0x018C, 0xB164, 0x9CD2, 0x49E0,
+	0xD8B4, 0xACFA, 0xF307, 0xCF25, 0xCAAF, 0xF48E, 0x47E9, 0x1018,
+	0x6FD5, 0xF088, 0x4A6F, 0x5C72, 0x3824, 0x57F1, 0x73C7, 0x9751,
+	0xCB23, 0xA17C, 0xE89C, 0x3E21, 0x96DD, 0x61DC, 0x0D86, 0x0F85,
+	0xE090, 0x7C42, 0x71C4, 0xCCAA, 0x90D8, 0x0605, 0xF701, 0x1C12,
+	0xC2A3, 0x6A5F, 0xAEF9, 0x69D0, 0x1791, 0x9958, 0x3A27, 0x27B9,
+	0xD938, 0xEB13, 0x2BB3, 0x2233, 0xD2BB, 0xA970, 0x0789, 0x33A7,
+	0x2DB6, 0x3C22, 0x1592, 0xC920, 0x8749, 0xAAFF, 0x5078, 0xA57A,
+	0x038F, 0x59F8, 0x0980, 0x1A17, 0x65DA, 0xD731, 0x84C6, 0xD0B8,
+	0x82C3, 0x29B0, 0x5A77, 0x1E11, 0x7BCB, 0xA8FC, 0x6DD6, 0x2C3A,
+};
+
+
+static inline u16 _S_(u16 v)
+{
+	u16 t = Sbox[Hi8(v)];
+	return Sbox[Lo8(v)] ^ ((t << 8) | (t >> 8));
+}
+
+
+#define PHASE1_LOOP_COUNT 8
+
+
+static void tkip_mixing_phase1(u16 *TTAK, const u8 *TK, const u8 *TA, u32 IV32)
+{
+	int i, j;
+
+	/* Initialize the 80-bit TTAK from TSC (IV32) and TA[0..5] */
+	TTAK[0] = Lo16(IV32);
+	TTAK[1] = Hi16(IV32);
+	TTAK[2] = Mk16(TA[1], TA[0]);
+	TTAK[3] = Mk16(TA[3], TA[2]);
+	TTAK[4] = Mk16(TA[5], TA[4]);
+
+	for (i = 0; i < PHASE1_LOOP_COUNT; i++) {
+		j = 2 * (i & 1);
+		TTAK[0] += _S_(TTAK[4] ^ Mk16(TK[1 + j], TK[0 + j]));
+		TTAK[1] += _S_(TTAK[0] ^ Mk16(TK[5 + j], TK[4 + j]));
+		TTAK[2] += _S_(TTAK[1] ^ Mk16(TK[9 + j], TK[8 + j]));
+		TTAK[3] += _S_(TTAK[2] ^ Mk16(TK[13 + j], TK[12 + j]));
+		TTAK[4] += _S_(TTAK[3] ^ Mk16(TK[1 + j], TK[0 + j])) + i;
+	}
+}
+
+
+static void tkip_mixing_phase2(u8 *WEPSeed, const u8 *TK, const u16 *TTAK,
+			       u16 IV16)
+{
+	/* Make temporary area overlap WEP seed so that the final copy can be
+	 * avoided on little endian hosts. */
+	u16 *PPK = (u16 *) &WEPSeed[4];
+
+	/* Step 1 - make copy of TTAK and bring in TSC */
+	PPK[0] = TTAK[0];
+	PPK[1] = TTAK[1];
+	PPK[2] = TTAK[2];
+	PPK[3] = TTAK[3];
+	PPK[4] = TTAK[4];
+	PPK[5] = TTAK[4] + IV16;
+
+	/* Step 2 - 96-bit bijective mixing using S-box */
+	PPK[0] += _S_(PPK[5] ^ Mk16_le((u16 *) &TK[0]));
+	PPK[1] += _S_(PPK[0] ^ Mk16_le((u16 *) &TK[2]));
+	PPK[2] += _S_(PPK[1] ^ Mk16_le((u16 *) &TK[4]));
+	PPK[3] += _S_(PPK[2] ^ Mk16_le((u16 *) &TK[6]));
+	PPK[4] += _S_(PPK[3] ^ Mk16_le((u16 *) &TK[8]));
+	PPK[5] += _S_(PPK[4] ^ Mk16_le((u16 *) &TK[10]));
+
+	PPK[0] += RotR1(PPK[5] ^ Mk16_le((u16 *) &TK[12]));
+	PPK[1] += RotR1(PPK[0] ^ Mk16_le((u16 *) &TK[14]));
+	PPK[2] += RotR1(PPK[1]);
+	PPK[3] += RotR1(PPK[2]);
+	PPK[4] += RotR1(PPK[3]);
+	PPK[5] += RotR1(PPK[4]);
+
+	/* Step 3 - bring in last of TK bits, assign 24-bit WEP IV value
+	 * WEPSeed[0..2] is transmitted as WEP IV */
+	WEPSeed[0] = Hi8(IV16);
+	WEPSeed[1] = (Hi8(IV16) | 0x20) & 0x7F;
+	WEPSeed[2] = Lo8(IV16);
+	WEPSeed[3] = Lo8((PPK[5] ^ Mk16_le((u16 *) &TK[0])) >> 1);
+
+#ifdef __BIG_ENDIAN
+	{
+		int i;
+		for (i = 0; i < 6; i++)
+			PPK[i] = (PPK[i] << 8) | (PPK[i] >> 8);
+	}
+#endif
+}
+
+
+static int ieee80211_tkip_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
+{
+	struct ieee80211_tkip_data *tkey = priv;
+		int len;
+	u8 *pos;
+	struct ieee80211_hdr_4addr *hdr;
+	cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
+
+	#if((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)) || (OPENSUSE_SLED))
+	struct blkcipher_desc desc = {.tfm = tkey->tx_tfm_arc4};
+	int ret = 0;
+	#endif
+	u8 rc4key[16],  *icv;
+	u32 crc;
+	struct scatterlist sg;
+
+	if (skb_headroom(skb) < 8 || skb_tailroom(skb) < 4 ||
+	    skb->len < hdr_len)
+		return -1;
+
+	hdr = (struct ieee80211_hdr_4addr *) skb->data;
+
+#if 0
+printk("@@ tkey\n");
+printk("%x|", ((u32*)tkey->key)[0]);
+printk("%x|", ((u32*)tkey->key)[1]);
+printk("%x|", ((u32*)tkey->key)[2]);
+printk("%x|", ((u32*)tkey->key)[3]);
+printk("%x|", ((u32*)tkey->key)[4]);
+printk("%x|", ((u32*)tkey->key)[5]);
+printk("%x|", ((u32*)tkey->key)[6]);
+printk("%x\n", ((u32*)tkey->key)[7]);
+#endif
+
+	if (!tcb_desc->bHwSec)
+	{
+		if (!tkey->tx_phase1_done) {
+			tkip_mixing_phase1(tkey->tx_ttak, tkey->key, hdr->addr2,
+					tkey->tx_iv32);
+			tkey->tx_phase1_done = 1;
+		}
+		tkip_mixing_phase2(rc4key, tkey->key, tkey->tx_ttak, tkey->tx_iv16);
+	}
+	else
+	tkey->tx_phase1_done = 1;
+
+
+	len = skb->len - hdr_len;
+	pos = skb_push(skb, 8);
+	memmove(pos, pos + 8, hdr_len);
+	pos += hdr_len;
+
+	if (tcb_desc->bHwSec)
+	{
+		*pos++ = Hi8(tkey->tx_iv16);
+		*pos++ = (Hi8(tkey->tx_iv16) | 0x20) & 0x7F;
+		*pos++ = Lo8(tkey->tx_iv16);
+	}
+	else
+	{
+		*pos++ = rc4key[0];
+		*pos++ = rc4key[1];
+		*pos++ = rc4key[2];
+	}
+
+	*pos++ = (tkey->key_idx << 6) | (1 << 5) /* Ext IV included */;
+	*pos++ = tkey->tx_iv32 & 0xff;
+	*pos++ = (tkey->tx_iv32 >> 8) & 0xff;
+	*pos++ = (tkey->tx_iv32 >> 16) & 0xff;
+	*pos++ = (tkey->tx_iv32 >> 24) & 0xff;
+
+	if (!tcb_desc->bHwSec)
+	{
+		icv = skb_put(skb, 4);
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+		crc = ~crc32_le(~0, pos, len);
+#else
+		crc = ~ether_crc_le(len, pos);
+#endif
+		icv[0] = crc;
+		icv[1] = crc >> 8;
+		icv[2] = crc >> 16;
+		icv[3] = crc >> 24;
+#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
+		crypto_cipher_setkey(tkey->tx_tfm_arc4, rc4key, 16);
+		sg.page = virt_to_page(pos);
+		sg.offset = offset_in_page(pos);
+		sg.length = len + 4;
+		crypto_cipher_encrypt(tkey->tx_tfm_arc4, &sg, &sg, len + 4);
+#else
+		crypto_blkcipher_setkey(tkey->tx_tfm_arc4, rc4key, 16);
+#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
+		sg.page = virt_to_page(pos);
+		sg.offset = offset_in_page(pos);
+		sg.length = len + 4;
+#else
+		sg_init_one(&sg, pos, len+4);
+#endif
+		ret= crypto_blkcipher_encrypt(&desc, &sg, &sg, len + 4);
+#endif
+
+	}
+
+	tkey->tx_iv16++;
+	if (tkey->tx_iv16 == 0) {
+		tkey->tx_phase1_done = 0;
+		tkey->tx_iv32++;
+	}
+
+	if (!tcb_desc->bHwSec)
+#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
+		return 0;
+	#else
+		return ret;
+	#endif
+	else
+        	return 0;
+
+
+}
+
+static int ieee80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
+{
+	struct ieee80211_tkip_data *tkey = priv;
+	u8 keyidx, *pos;
+	u32 iv32;
+	u16 iv16;
+	struct ieee80211_hdr_4addr *hdr;
+	cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
+	#if((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)) || (OPENSUSE_SLED))
+	struct blkcipher_desc desc = {.tfm = tkey->rx_tfm_arc4};
+	#endif
+	u8 rc4key[16];
+	u8 icv[4];
+	u32 crc;
+	struct scatterlist sg;
+	int plen;
+	if (skb->len < hdr_len + 8 + 4)
+		return -1;
+
+	hdr = (struct ieee80211_hdr_4addr *) skb->data;
+	pos = skb->data + hdr_len;
+	keyidx = pos[3];
+	if (!(keyidx & (1 << 5))) {
+		if (net_ratelimit()) {
+			printk(KERN_DEBUG "TKIP: received packet without ExtIV"
+			       " flag from " MAC_FMT "\n", MAC_ARG(hdr->addr2));
+		}
+		return -2;
+	}
+	keyidx >>= 6;
+	if (tkey->key_idx != keyidx) {
+		printk(KERN_DEBUG "TKIP: RX tkey->key_idx=%d frame "
+		       "keyidx=%d priv=%p\n", tkey->key_idx, keyidx, priv);
+		return -6;
+	}
+	if (!tkey->key_set) {
+		if (net_ratelimit()) {
+			printk(KERN_DEBUG "TKIP: received packet from " MAC_FMT
+			       " with keyid=%d that does not have a configured"
+			       " key\n", MAC_ARG(hdr->addr2), keyidx);
+		}
+		return -3;
+	}
+	iv16 = (pos[0] << 8) | pos[2];
+	iv32 = pos[4] | (pos[5] << 8) | (pos[6] << 16) | (pos[7] << 24);
+	pos += 8;
+
+	if (!tcb_desc->bHwSec)
+	{
+		if (iv32 < tkey->rx_iv32 ||
+		(iv32 == tkey->rx_iv32 && iv16 <= tkey->rx_iv16)) {
+			if (net_ratelimit()) {
+				printk(KERN_DEBUG "TKIP: replay detected: STA=" MAC_FMT
+				" previous TSC %08x%04x received TSC "
+				"%08x%04x\n", MAC_ARG(hdr->addr2),
+				tkey->rx_iv32, tkey->rx_iv16, iv32, iv16);
+			}
+			tkey->dot11RSNAStatsTKIPReplays++;
+			return -4;
+		}
+
+		if (iv32 != tkey->rx_iv32 || !tkey->rx_phase1_done) {
+			tkip_mixing_phase1(tkey->rx_ttak, tkey->key, hdr->addr2, iv32);
+			tkey->rx_phase1_done = 1;
+		}
+		tkip_mixing_phase2(rc4key, tkey->key, tkey->rx_ttak, iv16);
+
+		plen = skb->len - hdr_len - 12;
+
+#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
+		crypto_cipher_setkey(tkey->rx_tfm_arc4, rc4key, 16);
+		sg.page = virt_to_page(pos);
+		sg.offset = offset_in_page(pos);
+		sg.length = plen + 4;
+		crypto_cipher_decrypt(tkey->rx_tfm_arc4, &sg, &sg, plen + 4);
+#else
+		crypto_blkcipher_setkey(tkey->rx_tfm_arc4, rc4key, 16);
+#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
+		sg.page = virt_to_page(pos);
+		sg.offset = offset_in_page(pos);
+		sg.length = plen + 4;
+#else
+		sg_init_one(&sg, pos, plen+4);
+#endif
+		if (crypto_blkcipher_decrypt(&desc, &sg, &sg, plen + 4)) {
+			if (net_ratelimit()) {
+				printk(KERN_DEBUG ": TKIP: failed to decrypt "
+						"received packet from " MAC_FMT "\n",
+						MAC_ARG(hdr->addr2));
+			}
+			return -7;
+		}
+#endif
+
+	#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+		crc = ~crc32_le(~0, pos, plen);
+	#else
+		crc = ~ether_crc_le(plen, pos);
+	#endif
+		icv[0] = crc;
+		icv[1] = crc >> 8;
+		icv[2] = crc >> 16;
+		icv[3] = crc >> 24;
+
+		if (memcmp(icv, pos + plen, 4) != 0) {
+			if (iv32 != tkey->rx_iv32) {
+				/* Previously cached Phase1 result was already lost, so
+				* it needs to be recalculated for the next packet. */
+				tkey->rx_phase1_done = 0;
+			}
+			if (net_ratelimit()) {
+				printk(KERN_DEBUG "TKIP: ICV error detected: STA="
+				MAC_FMT "\n", MAC_ARG(hdr->addr2));
+			}
+			tkey->dot11RSNAStatsTKIPICVErrors++;
+			return -5;
+		}
+
+	}
+
+	/* Update real counters only after Michael MIC verification has
+	 * completed */
+	tkey->rx_iv32_new = iv32;
+	tkey->rx_iv16_new = iv16;
+
+	/* Remove IV and ICV */
+	memmove(skb->data + 8, skb->data, hdr_len);
+	skb_pull(skb, 8);
+	skb_trim(skb, skb->len - 4);
+
+//john's test
+#ifdef JOHN_DUMP
+if( ((u16*)skb->data)[0] & 0x4000){
+        printk("@@ rx decrypted skb->data");
+        int i;
+        for(i=0;i<skb->len;i++){
+                if( (i%24)==0 ) printk("\n");
+                printk("%2x ", ((u8*)skb->data)[i]);
+        }
+        printk("\n");
+}
+#endif /*JOHN_DUMP*/
+	return keyidx;
+}
+
+
+#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
+static int michael_mic(struct crypto_tfm * tfm_michael, u8 *key, u8 *hdr,
+		       u8 *data, size_t data_len, u8 *mic)
+{
+	struct scatterlist sg[2];
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+        struct hash_desc desc;
+        int ret = 0;
+#endif
+
+	if (tfm_michael == NULL){
+		printk(KERN_WARNING "michael_mic: tfm_michael == NULL\n");
+		return -1;
+	}
+	sg[0].page = virt_to_page(hdr);
+	sg[0].offset = offset_in_page(hdr);
+	sg[0].length = 16;
+
+	sg[1].page = virt_to_page(data);
+	sg[1].offset = offset_in_page(data);
+	sg[1].length = data_len;
+
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
+	crypto_digest_init(tfm_michael);
+        crypto_digest_setkey(tfm_michael, key, 8);
+        crypto_digest_update(tfm_michael, sg, 2);
+        crypto_digest_final(tfm_michael, mic);
+        return 0;
+#else
+if (crypto_hash_setkey(tkey->tfm_michael, key, 8))
+                return -1;
+
+//      return 0;
+              desc.tfm = tkey->tfm_michael;
+              desc.flags = 0;
+              ret = crypto_hash_digest(&desc, sg, data_len + 16, mic);
+              return ret;
+#endif
+}
+#else
+static int michael_mic(struct crypto_hash *tfm_michael, u8 * key, u8 * hdr,
+                       u8 * data, size_t data_len, u8 * mic)
+{
+        struct hash_desc desc;
+        struct scatterlist sg[2];
+
+        if (tfm_michael == NULL) {
+                printk(KERN_WARNING "michael_mic: tfm_michael == NULL\n");
+                return -1;
+        }
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)
+        sg[0].page = virt_to_page(hdr);
+        sg[0].offset = offset_in_page(hdr);
+        sg[0].length = 16;
+
+        sg[1].page = virt_to_page(data);
+        sg[1].offset = offset_in_page(data);
+        sg[1].length = data_len;
+#else
+        sg_init_table(sg, 2);
+        sg_set_buf(&sg[0], hdr, 16);
+        sg_set_buf(&sg[1], data, data_len);
+#endif
+
+        if (crypto_hash_setkey(tfm_michael, key, 8))
+                return -1;
+
+        desc.tfm = tfm_michael;
+        desc.flags = 0;
+        return crypto_hash_digest(&desc, sg, data_len + 16, mic);
+}
+#endif
+
+
+
+static void michael_mic_hdr(struct sk_buff *skb, u8 *hdr)
+{
+	struct ieee80211_hdr_4addr *hdr11;
+
+	hdr11 = (struct ieee80211_hdr_4addr *) skb->data;
+	switch (le16_to_cpu(hdr11->frame_ctl) &
+		(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS)) {
+	case IEEE80211_FCTL_TODS:
+		memcpy(hdr, hdr11->addr3, ETH_ALEN); /* DA */
+		memcpy(hdr + ETH_ALEN, hdr11->addr2, ETH_ALEN); /* SA */
+		break;
+	case IEEE80211_FCTL_FROMDS:
+		memcpy(hdr, hdr11->addr1, ETH_ALEN); /* DA */
+		memcpy(hdr + ETH_ALEN, hdr11->addr3, ETH_ALEN); /* SA */
+		break;
+	case IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS:
+		memcpy(hdr, hdr11->addr3, ETH_ALEN); /* DA */
+		memcpy(hdr + ETH_ALEN, hdr11->addr4, ETH_ALEN); /* SA */
+		break;
+	case 0:
+		memcpy(hdr, hdr11->addr1, ETH_ALEN); /* DA */
+		memcpy(hdr + ETH_ALEN, hdr11->addr2, ETH_ALEN); /* SA */
+		break;
+	}
+
+	hdr[12] = 0; /* priority */
+
+	hdr[13] = hdr[14] = hdr[15] = 0; /* reserved */
+}
+
+
+static int ieee80211_michael_mic_add(struct sk_buff *skb, int hdr_len, void *priv)
+{
+	struct ieee80211_tkip_data *tkey = priv;
+	u8 *pos;
+	struct ieee80211_hdr_4addr *hdr;
+
+	hdr = (struct ieee80211_hdr_4addr *) skb->data;
+
+	if (skb_tailroom(skb) < 8 || skb->len < hdr_len) {
+		printk(KERN_DEBUG "Invalid packet for Michael MIC add "
+		       "(tailroom=%d hdr_len=%d skb->len=%d)\n",
+		       skb_tailroom(skb), hdr_len, skb->len);
+		return -1;
+	}
+
+	michael_mic_hdr(skb, tkey->tx_hdr);
+
+	// { david, 2006.9.1
+	// fix the wpa process with wmm enabled.
+	if(IEEE80211_QOS_HAS_SEQ(le16_to_cpu(hdr->frame_ctl))) {
+		tkey->tx_hdr[12] = *(skb->data + hdr_len - 2) & 0x07;
+	}
+	// }
+	pos = skb_put(skb, 8);
+#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
+	if (michael_mic(tkey->tx_tfm_michael, &tkey->key[16], tkey->tx_hdr,
+				skb->data + hdr_len, skb->len - 8 - hdr_len, pos))
+#else
+	if (michael_mic(tkey->tx_tfm_michael, &tkey->key[16], tkey->tx_hdr,
+				skb->data + hdr_len, skb->len - 8 - hdr_len, pos))
+#endif
+		return -1;
+
+	return 0;
+}
+
+
+#if WIRELESS_EXT >= 18
+static void ieee80211_michael_mic_failure(struct net_device *dev,
+				       struct ieee80211_hdr_4addr *hdr,
+				       int keyidx)
+{
+	union iwreq_data wrqu;
+	struct iw_michaelmicfailure ev;
+
+	/* TODO: needed parameters: count, keyid, key type, TSC */
+	memset(&ev, 0, sizeof(ev));
+	ev.flags = keyidx & IW_MICFAILURE_KEY_ID;
+	if (hdr->addr1[0] & 0x01)
+		ev.flags |= IW_MICFAILURE_GROUP;
+	else
+		ev.flags |= IW_MICFAILURE_PAIRWISE;
+	ev.src_addr.sa_family = ARPHRD_ETHER;
+	memcpy(ev.src_addr.sa_data, hdr->addr2, ETH_ALEN);
+	memset(&wrqu, 0, sizeof(wrqu));
+	wrqu.data.length = sizeof(ev);
+	wireless_send_event(dev, IWEVMICHAELMICFAILURE, &wrqu, (char *) &ev);
+}
+#elif WIRELESS_EXT >= 15
+static void ieee80211_michael_mic_failure(struct net_device *dev,
+				       struct ieee80211_hdr_4addr *hdr,
+				       int keyidx)
+{
+	union iwreq_data wrqu;
+	char buf[128];
+
+	/* TODO: needed parameters: count, keyid, key type, TSC */
+	sprintf(buf, "MLME-MICHAELMICFAILURE.indication(keyid=%d %scast addr="
+		MAC_FMT ")", keyidx, hdr->addr1[0] & 0x01 ? "broad" : "uni",
+		MAC_ARG(hdr->addr2));
+	memset(&wrqu, 0, sizeof(wrqu));
+	wrqu.data.length = strlen(buf);
+	wireless_send_event(dev, IWEVCUSTOM, &wrqu, buf);
+}
+#else /* WIRELESS_EXT >= 15 */
+static inline void ieee80211_michael_mic_failure(struct net_device *dev,
+					      struct ieee80211_hdr_4addr *hdr,
+					      int keyidx)
+{
+}
+#endif /* WIRELESS_EXT >= 15 */
+
+static int ieee80211_michael_mic_verify(struct sk_buff *skb, int keyidx,
+				     int hdr_len, void *priv)
+{
+	struct ieee80211_tkip_data *tkey = priv;
+	u8 mic[8];
+	struct ieee80211_hdr_4addr *hdr;
+
+	hdr = (struct ieee80211_hdr_4addr *) skb->data;
+
+	if (!tkey->key_set)
+		return -1;
+
+	michael_mic_hdr(skb, tkey->rx_hdr);
+	// { david, 2006.9.1
+	// fix the wpa process with wmm enabled.
+	if(IEEE80211_QOS_HAS_SEQ(le16_to_cpu(hdr->frame_ctl))) {
+		tkey->rx_hdr[12] = *(skb->data + hdr_len - 2) & 0x07;
+	}
+	// }
+
+#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
+	if (michael_mic(tkey->rx_tfm_michael, &tkey->key[24], tkey->rx_hdr,
+				skb->data + hdr_len, skb->len - 8 - hdr_len, mic))
+#else
+	if (michael_mic(tkey->rx_tfm_michael, &tkey->key[24], tkey->rx_hdr,
+				skb->data + hdr_len, skb->len - 8 - hdr_len, mic))
+#endif
+            	return -1;
+	if (memcmp(mic, skb->data + skb->len - 8, 8) != 0) {
+		struct ieee80211_hdr_4addr *hdr;
+		hdr = (struct ieee80211_hdr_4addr *) skb->data;
+		printk(KERN_DEBUG "%s: Michael MIC verification failed for "
+		       "MSDU from " MAC_FMT " keyidx=%d\n",
+		       skb->dev ? skb->dev->name : "N/A", MAC_ARG(hdr->addr2),
+		       keyidx);
+		if (skb->dev)
+			ieee80211_michael_mic_failure(skb->dev, hdr, keyidx);
+		tkey->dot11RSNAStatsTKIPLocalMICFailures++;
+		return -1;
+	}
+
+	/* Update TSC counters for RX now that the packet verification has
+	 * completed. */
+	tkey->rx_iv32 = tkey->rx_iv32_new;
+	tkey->rx_iv16 = tkey->rx_iv16_new;
+
+	skb_trim(skb, skb->len - 8);
+
+	return 0;
+}
+
+
+static int ieee80211_tkip_set_key(void *key, int len, u8 *seq, void *priv)
+{
+	struct ieee80211_tkip_data *tkey = priv;
+	int keyidx;
+#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
+	struct crypto_tfm *tfm = tkey->tx_tfm_michael;
+	struct crypto_tfm *tfm2 = tkey->tx_tfm_arc4;
+	struct crypto_tfm *tfm3 = tkey->rx_tfm_michael;
+	struct crypto_tfm *tfm4 = tkey->rx_tfm_arc4;
+#else
+	struct crypto_hash *tfm = tkey->tx_tfm_michael;
+	struct crypto_blkcipher *tfm2 = tkey->tx_tfm_arc4;
+	struct crypto_hash *tfm3 = tkey->rx_tfm_michael;
+	struct crypto_blkcipher *tfm4 = tkey->rx_tfm_arc4;
+#endif
+
+	keyidx = tkey->key_idx;
+	memset(tkey, 0, sizeof(*tkey));
+	tkey->key_idx = keyidx;
+#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
+	tkey->tx_tfm_michael = tfm;
+	tkey->tx_tfm_arc4 = tfm2;
+	tkey->rx_tfm_michael = tfm3;
+	tkey->rx_tfm_arc4 = tfm4;
+#else
+	tkey->tx_tfm_michael = tfm;
+	tkey->tx_tfm_arc4 = tfm2;
+	tkey->rx_tfm_michael = tfm3;
+	tkey->rx_tfm_arc4 = tfm4;
+#endif
+
+	if (len == TKIP_KEY_LEN) {
+		memcpy(tkey->key, key, TKIP_KEY_LEN);
+		tkey->key_set = 1;
+		tkey->tx_iv16 = 1; /* TSC is initialized to 1 */
+		if (seq) {
+			tkey->rx_iv32 = (seq[5] << 24) | (seq[4] << 16) |
+				(seq[3] << 8) | seq[2];
+			tkey->rx_iv16 = (seq[1] << 8) | seq[0];
+		}
+	} else if (len == 0)
+		tkey->key_set = 0;
+	else
+		return -1;
+
+	return 0;
+}
+
+
+static int ieee80211_tkip_get_key(void *key, int len, u8 *seq, void *priv)
+{
+	struct ieee80211_tkip_data *tkey = priv;
+
+	if (len < TKIP_KEY_LEN)
+		return -1;
+
+	if (!tkey->key_set)
+		return 0;
+	memcpy(key, tkey->key, TKIP_KEY_LEN);
+
+	if (seq) {
+		/* Return the sequence number of the last transmitted frame. */
+		u16 iv16 = tkey->tx_iv16;
+		u32 iv32 = tkey->tx_iv32;
+		if (iv16 == 0)
+			iv32--;
+		iv16--;
+		seq[0] = tkey->tx_iv16;
+		seq[1] = tkey->tx_iv16 >> 8;
+		seq[2] = tkey->tx_iv32;
+		seq[3] = tkey->tx_iv32 >> 8;
+		seq[4] = tkey->tx_iv32 >> 16;
+		seq[5] = tkey->tx_iv32 >> 24;
+	}
+
+	return TKIP_KEY_LEN;
+}
+
+
+static char * ieee80211_tkip_print_stats(char *p, void *priv)
+{
+	struct ieee80211_tkip_data *tkip = priv;
+	p += sprintf(p, "key[%d] alg=TKIP key_set=%d "
+		     "tx_pn=%02x%02x%02x%02x%02x%02x "
+		     "rx_pn=%02x%02x%02x%02x%02x%02x "
+		     "replays=%d icv_errors=%d local_mic_failures=%d\n",
+		     tkip->key_idx, tkip->key_set,
+		     (tkip->tx_iv32 >> 24) & 0xff,
+		     (tkip->tx_iv32 >> 16) & 0xff,
+		     (tkip->tx_iv32 >> 8) & 0xff,
+		     tkip->tx_iv32 & 0xff,
+		     (tkip->tx_iv16 >> 8) & 0xff,
+		     tkip->tx_iv16 & 0xff,
+		     (tkip->rx_iv32 >> 24) & 0xff,
+		     (tkip->rx_iv32 >> 16) & 0xff,
+		     (tkip->rx_iv32 >> 8) & 0xff,
+		     tkip->rx_iv32 & 0xff,
+		     (tkip->rx_iv16 >> 8) & 0xff,
+		     tkip->rx_iv16 & 0xff,
+		     tkip->dot11RSNAStatsTKIPReplays,
+		     tkip->dot11RSNAStatsTKIPICVErrors,
+		     tkip->dot11RSNAStatsTKIPLocalMICFailures);
+	return p;
+}
+
+
+static struct ieee80211_crypto_ops ieee80211_crypt_tkip = {
+	.name			= "TKIP",
+	.init			= ieee80211_tkip_init,
+	.deinit			= ieee80211_tkip_deinit,
+	.encrypt_mpdu		= ieee80211_tkip_encrypt,
+	.decrypt_mpdu		= ieee80211_tkip_decrypt,
+	.encrypt_msdu		= ieee80211_michael_mic_add,
+	.decrypt_msdu		= ieee80211_michael_mic_verify,
+	.set_key		= ieee80211_tkip_set_key,
+	.get_key		= ieee80211_tkip_get_key,
+	.print_stats		= ieee80211_tkip_print_stats,
+	.extra_prefix_len	= 4 + 4, /* IV + ExtIV */
+	.extra_postfix_len	= 8 + 4, /* MIC + ICV */
+	.owner		        = THIS_MODULE,
+};
+
+
+static int __init ieee80211_crypto_tkip_init(void)
+{
+	return ieee80211_register_crypto_ops(&ieee80211_crypt_tkip);
+}
+
+
+static void __exit ieee80211_crypto_tkip_exit(void)
+{
+	ieee80211_unregister_crypto_ops(&ieee80211_crypt_tkip);
+}
+
+void ieee80211_tkip_null(void)
+{
+//    printk("============>%s()\n", __FUNCTION__);
+        return;
+}
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+EXPORT_SYMBOL(ieee80211_tkip_null);
+#else
+EXPORT_SYMBOL_NOVERS(ieee80211_tkip_null);
+#endif
+
+module_init(ieee80211_crypto_tkip_init);
+module_exit(ieee80211_crypto_tkip_exit);
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt_wep.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt_wep.c
new file mode 100644
index 00000000000..7e394328ec9
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt_wep.c
@@ -0,0 +1,397 @@
+/*
+ * Host AP crypt: host-based WEP encryption implementation for Host AP driver
+ *
+ * Copyright (c) 2002-2004, Jouni Malinen <jkmaline@cc.hut.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation. See README and COPYING for
+ * more details.
+ */
+
+//#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/skbuff.h>
+#include <asm/string.h>
+
+#include "ieee80211.h"
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,20))
+//#include "crypto_compat.h"
+#endif
+
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
+#include "rtl_crypto.h"
+#else
+#include <linux/crypto.h>
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
+    #include <asm/scatterlist.h>
+#else
+    #include <linux/scatterlist.h>
+#endif
+//#include <asm/scatterlist.h>
+#include <linux/crc32.h>
+//
+/*
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
+#include "rtl_crypto.h"
+#else
+#include <linux/crypto.h>
+#endif
+
+#include <asm/scatterlist.h>
+#include <linux/crc32.h>
+*/
+MODULE_AUTHOR("Jouni Malinen");
+MODULE_DESCRIPTION("Host AP crypt: WEP");
+MODULE_LICENSE("GPL");
+#ifndef OPENSUSE_SLED
+#define OPENSUSE_SLED 0
+#endif
+
+struct prism2_wep_data {
+	u32 iv;
+#define WEP_KEY_LEN 13
+	u8 key[WEP_KEY_LEN + 1];
+	u8 key_len;
+	u8 key_idx;
+#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
+	struct crypto_tfm *tfm;
+	#else
+        struct crypto_blkcipher *tx_tfm;
+        struct crypto_blkcipher *rx_tfm;
+        #endif
+};
+
+
+static void * prism2_wep_init(int keyidx)
+{
+	struct prism2_wep_data *priv;
+
+	priv = kmalloc(sizeof(*priv), GFP_ATOMIC);
+	if (priv == NULL)
+		goto fail;
+	memset(priv, 0, sizeof(*priv));
+	priv->key_idx = keyidx;
+
+#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
+	priv->tfm = crypto_alloc_tfm("arc4", 0);
+	if (priv->tfm == NULL) {
+		printk(KERN_DEBUG "ieee80211_crypt_wep: could not allocate "
+		       "crypto API arc4\n");
+		goto fail;
+	}
+	#else
+	priv->tx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0, CRYPTO_ALG_ASYNC);
+        if (IS_ERR(priv->tx_tfm)) {
+                printk(KERN_DEBUG "ieee80211_crypt_wep: could not allocate "
+                       "crypto API arc4\n");
+                priv->tx_tfm = NULL;
+                goto fail;
+        }
+        priv->rx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0, CRYPTO_ALG_ASYNC);
+        if (IS_ERR(priv->rx_tfm)) {
+                printk(KERN_DEBUG "ieee80211_crypt_wep: could not allocate "
+                       "crypto API arc4\n");
+                priv->rx_tfm = NULL;
+                goto fail;
+        }
+        #endif
+
+	/* start WEP IV from a random value */
+	get_random_bytes(&priv->iv, 4);
+
+	return priv;
+
+fail:
+#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
+	if (priv) {
+		if (priv->tfm)
+			crypto_free_tfm(priv->tfm);
+		kfree(priv);
+	}
+	#else
+	if (priv) {
+                if (priv->tx_tfm)
+                        crypto_free_blkcipher(priv->tx_tfm);
+                if (priv->rx_tfm)
+                        crypto_free_blkcipher(priv->rx_tfm);
+                kfree(priv);
+        }
+        #endif
+	return NULL;
+}
+
+
+static void prism2_wep_deinit(void *priv)
+{
+	struct prism2_wep_data *_priv = priv;
+#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
+	if (_priv && _priv->tfm)
+		crypto_free_tfm(_priv->tfm);
+	#else
+	if (_priv) {
+                if (_priv->tx_tfm)
+                        crypto_free_blkcipher(_priv->tx_tfm);
+                if (_priv->rx_tfm)
+                        crypto_free_blkcipher(_priv->rx_tfm);
+        }
+        #endif
+	kfree(priv);
+}
+
+/* Perform WEP encryption on given skb that has at least 4 bytes of headroom
+ * for IV and 4 bytes of tailroom for ICV. Both IV and ICV will be transmitted,
+ * so the payload length increases with 8 bytes.
+ *
+ * WEP frame payload: IV + TX key idx, RC4(data), ICV = RC4(CRC32(data))
+ */
+static int prism2_wep_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
+{
+	struct prism2_wep_data *wep = priv;
+	u32 klen, len;
+	u8 key[WEP_KEY_LEN + 3];
+	u8 *pos;
+	cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
+	#if((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)) || (OPENSUSE_SLED))
+	struct blkcipher_desc desc = {.tfm = wep->tx_tfm};
+	#endif
+	u32 crc;
+	u8 *icv;
+	struct scatterlist sg;
+	if (skb_headroom(skb) < 4 || skb_tailroom(skb) < 4 ||
+	    skb->len < hdr_len)
+		return -1;
+
+	len = skb->len - hdr_len;
+	pos = skb_push(skb, 4);
+	memmove(pos, pos + 4, hdr_len);
+	pos += hdr_len;
+
+	klen = 3 + wep->key_len;
+
+	wep->iv++;
+
+	/* Fluhrer, Mantin, and Shamir have reported weaknesses in the key
+	 * scheduling algorithm of RC4. At least IVs (KeyByte + 3, 0xff, N)
+	 * can be used to speedup attacks, so avoid using them. */
+	if ((wep->iv & 0xff00) == 0xff00) {
+		u8 B = (wep->iv >> 16) & 0xff;
+		if (B >= 3 && B < klen)
+			wep->iv += 0x0100;
+	}
+
+	/* Prepend 24-bit IV to RC4 key and TX frame */
+	*pos++ = key[0] = (wep->iv >> 16) & 0xff;
+	*pos++ = key[1] = (wep->iv >> 8) & 0xff;
+	*pos++ = key[2] = wep->iv & 0xff;
+	*pos++ = wep->key_idx << 6;
+
+	/* Copy rest of the WEP key (the secret part) */
+	memcpy(key + 3, wep->key, wep->key_len);
+
+	if (!tcb_desc->bHwSec)
+	{
+
+		/* Append little-endian CRC32 and encrypt it to produce ICV */
+	#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+		crc = ~crc32_le(~0, pos, len);
+	#else
+		crc = ~ether_crc_le(len, pos);
+	#endif
+		icv = skb_put(skb, 4);
+		icv[0] = crc;
+		icv[1] = crc >> 8;
+		icv[2] = crc >> 16;
+		icv[3] = crc >> 24;
+
+#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
+		crypto_cipher_setkey(wep->tfm, key, klen);
+		sg.page = virt_to_page(pos);
+		sg.offset = offset_in_page(pos);
+		sg.length = len + 4;
+		crypto_cipher_encrypt(wep->tfm, &sg, &sg, len + 4);
+		return 0;
+	#else
+		crypto_blkcipher_setkey(wep->tx_tfm, key, klen);
+	#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
+		sg.page = virt_to_page(pos);
+		sg.offset = offset_in_page(pos);
+		sg.length = len + 4;
+	#else
+		sg_init_one(&sg, pos, len+4);
+	#endif
+		return crypto_blkcipher_encrypt(&desc, &sg, &sg, len + 4);
+	#endif
+	}
+
+	return 0;
+}
+
+
+/* Perform WEP decryption on given buffer. Buffer includes whole WEP part of
+ * the frame: IV (4 bytes), encrypted payload (including SNAP header),
+ * ICV (4 bytes). len includes both IV and ICV.
+ *
+ * Returns 0 if frame was decrypted successfully and ICV was correct and -1 on
+ * failure. If frame is OK, IV and ICV will be removed.
+ */
+static int prism2_wep_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
+{
+	struct prism2_wep_data *wep = priv;
+	u32  klen, plen;
+	u8 key[WEP_KEY_LEN + 3];
+	u8 keyidx, *pos;
+	cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
+	#if((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)) || (OPENSUSE_SLED))
+	struct blkcipher_desc desc = {.tfm = wep->rx_tfm};
+	#endif
+	u32 crc;
+	u8 icv[4];
+	struct scatterlist sg;
+	if (skb->len < hdr_len + 8)
+		return -1;
+
+	pos = skb->data + hdr_len;
+	key[0] = *pos++;
+	key[1] = *pos++;
+	key[2] = *pos++;
+	keyidx = *pos++ >> 6;
+	if (keyidx != wep->key_idx)
+		return -1;
+
+	klen = 3 + wep->key_len;
+
+	/* Copy rest of the WEP key (the secret part) */
+	memcpy(key + 3, wep->key, wep->key_len);
+
+	/* Apply RC4 to data and compute CRC32 over decrypted data */
+	plen = skb->len - hdr_len - 8;
+
+	if (!tcb_desc->bHwSec)
+	{
+#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
+		crypto_cipher_setkey(wep->tfm, key, klen);
+		sg.page = virt_to_page(pos);
+		sg.offset = offset_in_page(pos);
+		sg.length = plen + 4;
+		crypto_cipher_decrypt(wep->tfm, &sg, &sg, plen + 4);
+	#else
+		crypto_blkcipher_setkey(wep->rx_tfm, key, klen);
+	#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
+		sg.page = virt_to_page(pos);
+		sg.offset = offset_in_page(pos);
+		sg.length = plen + 4;
+	#else
+		sg_init_one(&sg, pos, plen+4);
+	#endif
+		if (crypto_blkcipher_decrypt(&desc, &sg, &sg, plen + 4))
+			return -7;
+	#endif
+	#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+		crc = ~crc32_le(~0, pos, plen);
+	#else
+		crc = ~ether_crc_le(plen, pos);
+	#endif
+		icv[0] = crc;
+		icv[1] = crc >> 8;
+		icv[2] = crc >> 16;
+		icv[3] = crc >> 24;
+		if (memcmp(icv, pos + plen, 4) != 0) {
+			/* ICV mismatch - drop frame */
+			return -2;
+		}
+	}
+	/* Remove IV and ICV */
+	memmove(skb->data + 4, skb->data, hdr_len);
+	skb_pull(skb, 4);
+	skb_trim(skb, skb->len - 4);
+
+	return 0;
+}
+
+
+static int prism2_wep_set_key(void *key, int len, u8 *seq, void *priv)
+{
+	struct prism2_wep_data *wep = priv;
+
+	if (len < 0 || len > WEP_KEY_LEN)
+		return -1;
+
+	memcpy(wep->key, key, len);
+	wep->key_len = len;
+
+	return 0;
+}
+
+
+static int prism2_wep_get_key(void *key, int len, u8 *seq, void *priv)
+{
+	struct prism2_wep_data *wep = priv;
+
+	if (len < wep->key_len)
+		return -1;
+
+	memcpy(key, wep->key, wep->key_len);
+
+	return wep->key_len;
+}
+
+
+static char * prism2_wep_print_stats(char *p, void *priv)
+{
+	struct prism2_wep_data *wep = priv;
+	p += sprintf(p, "key[%d] alg=WEP len=%d\n",
+		     wep->key_idx, wep->key_len);
+	return p;
+}
+
+
+static struct ieee80211_crypto_ops ieee80211_crypt_wep = {
+	.name			= "WEP",
+	.init			= prism2_wep_init,
+	.deinit			= prism2_wep_deinit,
+	.encrypt_mpdu		= prism2_wep_encrypt,
+	.decrypt_mpdu		= prism2_wep_decrypt,
+	.encrypt_msdu		= NULL,
+	.decrypt_msdu		= NULL,
+	.set_key		= prism2_wep_set_key,
+	.get_key		= prism2_wep_get_key,
+	.print_stats		= prism2_wep_print_stats,
+	.extra_prefix_len	= 4, /* IV */
+	.extra_postfix_len	= 4, /* ICV */
+	.owner			= THIS_MODULE,
+};
+
+
+static int __init ieee80211_crypto_wep_init(void)
+{
+	return ieee80211_register_crypto_ops(&ieee80211_crypt_wep);
+}
+
+
+static void __exit ieee80211_crypto_wep_exit(void)
+{
+	ieee80211_unregister_crypto_ops(&ieee80211_crypt_wep);
+}
+
+void ieee80211_wep_null(void)
+{
+//	printk("============>%s()\n", __FUNCTION__);
+        return;
+}
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+EXPORT_SYMBOL(ieee80211_wep_null);
+#else
+EXPORT_SYMBOL_NOVERS(ieee80211_wep_null);
+#endif
+
+module_init(ieee80211_crypto_wep_init);
+module_exit(ieee80211_crypto_wep_exit);
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c
new file mode 100644
index 00000000000..f408b4583b8
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c
@@ -0,0 +1,394 @@
+/*******************************************************************************
+
+  Copyright(c) 2004 Intel Corporation. All rights reserved.
+
+  Portions of this file are based on the WEP enablement code provided by the
+  Host AP project hostap-drivers v0.1.3
+  Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+  <jkmaline@cc.hut.fi>
+  Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms of version 2 of the GNU General Public License as
+  published by the Free Software Foundation.
+
+  This program is distributed in the hope that it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc., 59
+  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+
+  The full GNU General Public License is included in this distribution in the
+  file called LICENSE.
+
+  Contact Information:
+  James P. Ketrenos <ipw2100-admin@linux.intel.com>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/compiler.h>
+//#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/if_arp.h>
+#include <linux/in6.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/proc_fs.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/tcp.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/wireless.h>
+#include <linux/etherdevice.h>
+#include <asm/uaccess.h>
+#include <net/arp.h>
+
+#include "ieee80211.h"
+
+MODULE_DESCRIPTION("802.11 data/management/control stack");
+MODULE_AUTHOR("Copyright (C) 2004 Intel Corporation <jketreno@linux.intel.com>");
+MODULE_LICENSE("GPL");
+
+#define DRV_NAME "ieee80211"
+
+static inline int ieee80211_networks_allocate(struct ieee80211_device *ieee)
+{
+	if (ieee->networks)
+		return 0;
+
+	ieee->networks = kmalloc(
+		MAX_NETWORK_COUNT * sizeof(struct ieee80211_network),
+		GFP_KERNEL);
+	if (!ieee->networks) {
+		printk(KERN_WARNING "%s: Out of memory allocating beacons\n",
+		       ieee->dev->name);
+		return -ENOMEM;
+	}
+
+	memset(ieee->networks, 0,
+	       MAX_NETWORK_COUNT * sizeof(struct ieee80211_network));
+
+	return 0;
+}
+
+static inline void ieee80211_networks_free(struct ieee80211_device *ieee)
+{
+	if (!ieee->networks)
+		return;
+	kfree(ieee->networks);
+	ieee->networks = NULL;
+}
+
+static inline void ieee80211_networks_initialize(struct ieee80211_device *ieee)
+{
+	int i;
+
+	INIT_LIST_HEAD(&ieee->network_free_list);
+	INIT_LIST_HEAD(&ieee->network_list);
+	for (i = 0; i < MAX_NETWORK_COUNT; i++)
+		list_add_tail(&ieee->networks[i].list, &ieee->network_free_list);
+}
+
+
+struct net_device *alloc_ieee80211(int sizeof_priv)
+{
+	struct ieee80211_device *ieee;
+	struct net_device *dev;
+	int i,err;
+
+	IEEE80211_DEBUG_INFO("Initializing...\n");
+
+	dev = alloc_etherdev(sizeof(struct ieee80211_device) + sizeof_priv);
+	if (!dev) {
+		IEEE80211_ERROR("Unable to network device.\n");
+		goto failed;
+	}
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0))
+	ieee = netdev_priv(dev);
+#else
+	ieee = (struct ieee80211_device *)dev->priv;
+#endif
+	dev->hard_start_xmit = ieee80211_xmit;
+
+	memset(ieee, 0, sizeof(struct ieee80211_device)+sizeof_priv);
+	ieee->dev = dev;
+
+	err = ieee80211_networks_allocate(ieee);
+	if (err) {
+		IEEE80211_ERROR("Unable to allocate beacon storage: %d\n",
+				err);
+		goto failed;
+	}
+	ieee80211_networks_initialize(ieee);
+
+
+	/* Default fragmentation threshold is maximum payload size */
+	ieee->fts = DEFAULT_FTS;
+	ieee->scan_age = DEFAULT_MAX_SCAN_AGE;
+	ieee->open_wep = 1;
+
+	/* Default to enabling full open WEP with host based encrypt/decrypt */
+	ieee->host_encrypt = 1;
+	ieee->host_decrypt = 1;
+	ieee->ieee802_1x = 1; /* Default to supporting 802.1x */
+
+	INIT_LIST_HEAD(&ieee->crypt_deinit_list);
+	init_timer(&ieee->crypt_deinit_timer);
+	ieee->crypt_deinit_timer.data = (unsigned long)ieee;
+	ieee->crypt_deinit_timer.function = ieee80211_crypt_deinit_handler;
+
+	spin_lock_init(&ieee->lock);
+	spin_lock_init(&ieee->wpax_suitlist_lock);
+	spin_lock_init(&ieee->bw_spinlock);
+	spin_lock_init(&ieee->reorder_spinlock);
+	//added by WB
+	atomic_set(&(ieee->atm_chnlop), 0);
+	atomic_set(&(ieee->atm_swbw), 0);
+
+	ieee->wpax_type_set = 0;
+ 	ieee->wpa_enabled = 0;
+ 	ieee->tkip_countermeasures = 0;
+ 	ieee->drop_unencrypted = 0;
+ 	ieee->privacy_invoked = 0;
+ 	ieee->ieee802_1x = 1;
+	ieee->raw_tx = 0;
+	//ieee->hwsec_support = 1; //defalt support hw security. //use module_param instead.
+	ieee->hwsec_active = 0; //disable hwsec, switch it on when necessary.
+
+	ieee80211_softmac_init(ieee);
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
+	ieee->pHTInfo = (RT_HIGH_THROUGHPUT*)kzalloc(sizeof(RT_HIGH_THROUGHPUT), GFP_KERNEL);
+#else
+	ieee->pHTInfo = (RT_HIGH_THROUGHPUT*)kmalloc(sizeof(RT_HIGH_THROUGHPUT), GFP_KERNEL);
+	memset(ieee->pHTInfo,0,sizeof(RT_HIGH_THROUGHPUT));
+#endif
+	if (ieee->pHTInfo == NULL)
+	{
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't alloc memory for HTInfo\n");
+		return NULL;
+	}
+	HTUpdateDefaultSetting(ieee);
+	HTInitializeHTInfo(ieee); //may move to other place.
+	TSInitialize(ieee);
+#if 0
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+ 	INIT_WORK(&ieee->ht_onAssRsp, (void(*)(void*)) HTOnAssocRsp_wq);
+#else
+	INIT_WORK(&ieee->ht_onAssRsp, (void(*)(void*)) HTOnAssocRsp_wq, ieee);
+#endif
+#endif
+	for (i = 0; i < IEEE_IBSS_MAC_HASH_SIZE; i++)
+		INIT_LIST_HEAD(&ieee->ibss_mac_hash[i]);
+
+	for (i = 0; i < 17; i++) {
+	  ieee->last_rxseq_num[i] = -1;
+	  ieee->last_rxfrag_num[i] = -1;
+	  ieee->last_packet_time[i] = 0;
+	}
+
+//These function were added to load crypte module autoly
+	ieee80211_tkip_null();
+	ieee80211_wep_null();
+	ieee80211_ccmp_null();
+
+	return dev;
+
+ failed:
+	if (dev)
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0))
+		free_netdev(dev);
+#else
+		kfree(dev);
+#endif
+	return NULL;
+}
+
+
+void free_ieee80211(struct net_device *dev)
+{
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0))
+	struct ieee80211_device *ieee = netdev_priv(dev);
+#else
+	struct ieee80211_device *ieee = (struct ieee80211_device *)dev->priv;
+#endif
+	int i;
+	//struct list_head *p, *q;
+//	del_timer_sync(&ieee->SwBwTimer);
+#if 1
+	if (ieee->pHTInfo != NULL)
+	{
+		kfree(ieee->pHTInfo);
+		ieee->pHTInfo = NULL;
+	}
+#endif
+	RemoveAllTS(ieee);
+	ieee80211_softmac_free(ieee);
+	del_timer_sync(&ieee->crypt_deinit_timer);
+	ieee80211_crypt_deinit_entries(ieee, 1);
+
+	for (i = 0; i < WEP_KEYS; i++) {
+		struct ieee80211_crypt_data *crypt = ieee->crypt[i];
+		if (crypt) {
+			if (crypt->ops) {
+				crypt->ops->deinit(crypt->priv);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+				module_put(crypt->ops->owner);
+#else
+				__MOD_DEC_USE_COUNT(crypt->ops->owner);
+#endif
+			}
+			kfree(crypt);
+			ieee->crypt[i] = NULL;
+		}
+	}
+
+	ieee80211_networks_free(ieee);
+#if 0
+	for (i = 0; i < IEEE_IBSS_MAC_HASH_SIZE; i++) {
+		list_for_each_safe(p, q, &ieee->ibss_mac_hash[i]) {
+			kfree(list_entry(p, struct ieee_ibss_seq, list));
+			list_del(p);
+		}
+	}
+
+#endif
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0))
+	free_netdev(dev);
+#else
+	kfree(dev);
+#endif
+}
+
+#ifdef CONFIG_IEEE80211_DEBUG
+
+u32 ieee80211_debug_level = 0;
+static int debug = \
+	//		    IEEE80211_DL_INFO	|
+	//		    IEEE80211_DL_WX	|
+	//		    IEEE80211_DL_SCAN	|
+	//		    IEEE80211_DL_STATE	|
+	//		    IEEE80211_DL_MGMT	|
+	//		    IEEE80211_DL_FRAG	|
+	//		    IEEE80211_DL_EAP	|
+	//		    IEEE80211_DL_DROP	|
+	//		    IEEE80211_DL_TX	|
+	//		    IEEE80211_DL_RX	|
+			    //IEEE80211_DL_QOS    |
+	//		    IEEE80211_DL_HT 	|
+	//		    IEEE80211_DL_TS	|
+//			    IEEE80211_DL_BA 	|
+	//		    IEEE80211_DL_REORDER|
+//			    IEEE80211_DL_TRACE  |
+			    //IEEE80211_DL_DATA	|
+			    IEEE80211_DL_ERR	  //awayls open this flags to show error out
+			    ;
+struct proc_dir_entry *ieee80211_proc = NULL;
+
+static int show_debug_level(char *page, char **start, off_t offset,
+			    int count, int *eof, void *data)
+{
+	return snprintf(page, count, "0x%08X\n", ieee80211_debug_level);
+}
+
+static int store_debug_level(struct file *file, const char *buffer,
+			     unsigned long count, void *data)
+{
+	char buf[] = "0x00000000";
+	unsigned long len = min(sizeof(buf) - 1, (u32)count);
+	char *p = (char *)buf;
+	unsigned long val;
+
+	if (copy_from_user(buf, buffer, len))
+		return count;
+	buf[len] = 0;
+	if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') {
+		p++;
+		if (p[0] == 'x' || p[0] == 'X')
+			p++;
+		val = simple_strtoul(p, &p, 16);
+	} else
+		val = simple_strtoul(p, &p, 10);
+	if (p == buf)
+		printk(KERN_INFO DRV_NAME
+		       ": %s is not in hex or decimal form.\n", buf);
+	else
+		ieee80211_debug_level = val;
+
+	return strnlen(buf, count);
+}
+
+static int __init ieee80211_init(void)
+{
+	struct proc_dir_entry *e;
+
+	ieee80211_debug_level = debug;
+#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
+	ieee80211_proc = create_proc_entry(DRV_NAME, S_IFDIR, proc_net);
+#else
+	ieee80211_proc = create_proc_entry(DRV_NAME, S_IFDIR, init_net.proc_net);
+#endif
+	if (ieee80211_proc == NULL) {
+		IEEE80211_ERROR("Unable to create " DRV_NAME
+				" proc directory\n");
+		return -EIO;
+	}
+	e = create_proc_entry("debug_level", S_IFREG | S_IRUGO | S_IWUSR,
+			      ieee80211_proc);
+	if (!e) {
+#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
+		remove_proc_entry(DRV_NAME, proc_net);
+#else
+		remove_proc_entry(DRV_NAME, init_net.proc_net);
+#endif
+		ieee80211_proc = NULL;
+		return -EIO;
+	}
+	e->read_proc = show_debug_level;
+	e->write_proc = store_debug_level;
+	e->data = NULL;
+
+	return 0;
+}
+
+static void __exit ieee80211_exit(void)
+{
+	if (ieee80211_proc) {
+		remove_proc_entry("debug_level", ieee80211_proc);
+#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
+		remove_proc_entry(DRV_NAME, proc_net);
+#else
+		remove_proc_entry(DRV_NAME, init_net.proc_net);
+#endif
+		ieee80211_proc = NULL;
+	}
+}
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+#include <linux/moduleparam.h>
+module_param(debug, int, 0444);
+MODULE_PARM_DESC(debug, "debug output mask");
+
+
+module_exit(ieee80211_exit);
+module_init(ieee80211_init);
+#endif
+#endif
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+EXPORT_SYMBOL(alloc_ieee80211);
+EXPORT_SYMBOL(free_ieee80211);
+#else
+EXPORT_SYMBOL_NOVERS(alloc_ieee80211);
+EXPORT_SYMBOL_NOVERS(free_ieee80211);
+#endif
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_rx.c
new file mode 100644
index 00000000000..2b2ffd34bc9
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_rx.c
@@ -0,0 +1,2832 @@
+/*
+ * Original code based Host AP (software wireless LAN access point) driver
+ * for Intersil Prism2/2.5/3 - hostap.o module, common routines
+ *
+ * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+ * <jkmaline@cc.hut.fi>
+ * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+ * Copyright (c) 2004, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation. See README and COPYING for
+ * more details.
+ ******************************************************************************
+
+  Few modifications for Realtek's Wi-Fi drivers by
+  Andrea Merello <andreamrl@tiscali.it>
+
+  A special thanks goes to Realtek for their support !
+
+******************************************************************************/
+
+
+#include <linux/compiler.h>
+//#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/if_arp.h>
+#include <linux/in6.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/proc_fs.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/tcp.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/wireless.h>
+#include <linux/etherdevice.h>
+#include <asm/uaccess.h>
+#include <linux/ctype.h>
+
+#include "ieee80211.h"
+#ifdef ENABLE_DOT11D
+#include "dot11d.h"
+#endif
+static inline void ieee80211_monitor_rx(struct ieee80211_device *ieee,
+					struct sk_buff *skb,
+					struct ieee80211_rx_stats *rx_stats)
+{
+	struct ieee80211_hdr_4addr *hdr = (struct ieee80211_hdr_4addr *)skb->data;
+	u16 fc = le16_to_cpu(hdr->frame_ctl);
+
+	skb->dev = ieee->dev;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,22)
+        skb_reset_mac_header(skb);
+#else
+        skb->mac.raw = skb->data;
+#endif
+
+	skb_pull(skb, ieee80211_get_hdrlen(fc));
+	skb->pkt_type = PACKET_OTHERHOST;
+	skb->protocol = __constant_htons(ETH_P_80211_RAW);
+	memset(skb->cb, 0, sizeof(skb->cb));
+	netif_rx(skb);
+}
+
+
+/* Called only as a tasklet (software IRQ) */
+static struct ieee80211_frag_entry *
+ieee80211_frag_cache_find(struct ieee80211_device *ieee, unsigned int seq,
+			  unsigned int frag, u8 tid,u8 *src, u8 *dst)
+{
+	struct ieee80211_frag_entry *entry;
+	int i;
+
+	for (i = 0; i < IEEE80211_FRAG_CACHE_LEN; i++) {
+		entry = &ieee->frag_cache[tid][i];
+		if (entry->skb != NULL &&
+		    time_after(jiffies, entry->first_frag_time + 2 * HZ)) {
+			IEEE80211_DEBUG_FRAG(
+				"expiring fragment cache entry "
+				"seq=%u last_frag=%u\n",
+				entry->seq, entry->last_frag);
+			dev_kfree_skb_any(entry->skb);
+			entry->skb = NULL;
+		}
+
+		if (entry->skb != NULL && entry->seq == seq &&
+		    (entry->last_frag + 1 == frag || frag == -1) &&
+		    memcmp(entry->src_addr, src, ETH_ALEN) == 0 &&
+		    memcmp(entry->dst_addr, dst, ETH_ALEN) == 0)
+			return entry;
+	}
+
+	return NULL;
+}
+
+/* Called only as a tasklet (software IRQ) */
+static struct sk_buff *
+ieee80211_frag_cache_get(struct ieee80211_device *ieee,
+			 struct ieee80211_hdr_4addr *hdr)
+{
+	struct sk_buff *skb = NULL;
+	u16 fc = le16_to_cpu(hdr->frame_ctl);
+	u16 sc = le16_to_cpu(hdr->seq_ctl);
+	unsigned int frag = WLAN_GET_SEQ_FRAG(sc);
+	unsigned int seq = WLAN_GET_SEQ_SEQ(sc);
+	struct ieee80211_frag_entry *entry;
+	struct ieee80211_hdr_3addrqos *hdr_3addrqos;
+	struct ieee80211_hdr_4addrqos *hdr_4addrqos;
+	u8 tid;
+
+	if (((fc & IEEE80211_FCTL_DSTODS) == IEEE80211_FCTL_DSTODS)&&IEEE80211_QOS_HAS_SEQ(fc)) {
+	  hdr_4addrqos = (struct ieee80211_hdr_4addrqos *)hdr;
+	  tid = le16_to_cpu(hdr_4addrqos->qos_ctl) & IEEE80211_QCTL_TID;
+	  tid = UP2AC(tid);
+	  tid ++;
+	} else if (IEEE80211_QOS_HAS_SEQ(fc)) {
+	  hdr_3addrqos = (struct ieee80211_hdr_3addrqos *)hdr;
+	  tid = le16_to_cpu(hdr_3addrqos->qos_ctl) & IEEE80211_QCTL_TID;
+	  tid = UP2AC(tid);
+	  tid ++;
+	} else {
+	  tid = 0;
+	}
+
+	if (frag == 0) {
+		/* Reserve enough space to fit maximum frame length */
+		skb = dev_alloc_skb(ieee->dev->mtu +
+				    sizeof(struct ieee80211_hdr_4addr) +
+				    8 /* LLC */ +
+				    2 /* alignment */ +
+				    8 /* WEP */ +
+				    ETH_ALEN /* WDS */ +
+				    (IEEE80211_QOS_HAS_SEQ(fc)?2:0) /* QOS Control */);
+		if (skb == NULL)
+			return NULL;
+
+		entry = &ieee->frag_cache[tid][ieee->frag_next_idx[tid]];
+		ieee->frag_next_idx[tid]++;
+		if (ieee->frag_next_idx[tid] >= IEEE80211_FRAG_CACHE_LEN)
+			ieee->frag_next_idx[tid] = 0;
+
+		if (entry->skb != NULL)
+			dev_kfree_skb_any(entry->skb);
+
+		entry->first_frag_time = jiffies;
+		entry->seq = seq;
+		entry->last_frag = frag;
+		entry->skb = skb;
+		memcpy(entry->src_addr, hdr->addr2, ETH_ALEN);
+		memcpy(entry->dst_addr, hdr->addr1, ETH_ALEN);
+	} else {
+		/* received a fragment of a frame for which the head fragment
+		 * should have already been received */
+		entry = ieee80211_frag_cache_find(ieee, seq, frag, tid,hdr->addr2,
+						  hdr->addr1);
+		if (entry != NULL) {
+			entry->last_frag = frag;
+			skb = entry->skb;
+		}
+	}
+
+	return skb;
+}
+
+
+/* Called only as a tasklet (software IRQ) */
+static int ieee80211_frag_cache_invalidate(struct ieee80211_device *ieee,
+					   struct ieee80211_hdr_4addr *hdr)
+{
+	u16 fc = le16_to_cpu(hdr->frame_ctl);
+	u16 sc = le16_to_cpu(hdr->seq_ctl);
+	unsigned int seq = WLAN_GET_SEQ_SEQ(sc);
+	struct ieee80211_frag_entry *entry;
+	struct ieee80211_hdr_3addrqos *hdr_3addrqos;
+	struct ieee80211_hdr_4addrqos *hdr_4addrqos;
+	u8 tid;
+
+	if(((fc & IEEE80211_FCTL_DSTODS) == IEEE80211_FCTL_DSTODS)&&IEEE80211_QOS_HAS_SEQ(fc)) {
+	  hdr_4addrqos = (struct ieee80211_hdr_4addrqos *)hdr;
+	  tid = le16_to_cpu(hdr_4addrqos->qos_ctl) & IEEE80211_QCTL_TID;
+	  tid = UP2AC(tid);
+	  tid ++;
+	} else if (IEEE80211_QOS_HAS_SEQ(fc)) {
+	  hdr_3addrqos = (struct ieee80211_hdr_3addrqos *)hdr;
+	  tid = le16_to_cpu(hdr_3addrqos->qos_ctl) & IEEE80211_QCTL_TID;
+	  tid = UP2AC(tid);
+	  tid ++;
+	} else {
+	  tid = 0;
+	}
+
+	entry = ieee80211_frag_cache_find(ieee, seq, -1, tid,hdr->addr2,
+					  hdr->addr1);
+
+	if (entry == NULL) {
+		IEEE80211_DEBUG_FRAG(
+			"could not invalidate fragment cache "
+			"entry (seq=%u)\n", seq);
+		return -1;
+	}
+
+	entry->skb = NULL;
+	return 0;
+}
+
+
+
+/* ieee80211_rx_frame_mgtmt
+ *
+ * Responsible for handling management control frames
+ *
+ * Called by ieee80211_rx */
+static inline int
+ieee80211_rx_frame_mgmt(struct ieee80211_device *ieee, struct sk_buff *skb,
+			struct ieee80211_rx_stats *rx_stats, u16 type,
+			u16 stype)
+{
+	/* On the struct stats definition there is written that
+	 * this is not mandatory.... but seems that the probe
+	 * response parser uses it
+	 */
+        struct ieee80211_hdr_3addr * hdr = (struct ieee80211_hdr_3addr *)skb->data;
+
+	rx_stats->len = skb->len;
+	ieee80211_rx_mgt(ieee,(struct ieee80211_hdr_4addr *)skb->data,rx_stats);
+        //if ((ieee->state == IEEE80211_LINKED) && (memcmp(hdr->addr3, ieee->current_network.bssid, ETH_ALEN)))
+        if ((memcmp(hdr->addr1, ieee->dev->dev_addr, ETH_ALEN)))//use ADDR1 to perform address matching for Management frames
+        {
+                dev_kfree_skb_any(skb);
+                return 0;
+        }
+
+	ieee80211_rx_frame_softmac(ieee, skb, rx_stats, type, stype);
+
+	dev_kfree_skb_any(skb);
+
+	return 0;
+
+	#ifdef NOT_YET
+	if (ieee->iw_mode == IW_MODE_MASTER) {
+		printk(KERN_DEBUG "%s: Master mode not yet suppported.\n",
+		       ieee->dev->name);
+		return 0;
+/*
+  hostap_update_sta_ps(ieee, (struct hostap_ieee80211_hdr_4addr *)
+  skb->data);*/
+	}
+
+	if (ieee->hostapd && type == IEEE80211_TYPE_MGMT) {
+		if (stype == WLAN_FC_STYPE_BEACON &&
+		    ieee->iw_mode == IW_MODE_MASTER) {
+			struct sk_buff *skb2;
+			/* Process beacon frames also in kernel driver to
+			 * update STA(AP) table statistics */
+			skb2 = skb_clone(skb, GFP_ATOMIC);
+			if (skb2)
+				hostap_rx(skb2->dev, skb2, rx_stats);
+		}
+
+		/* send management frames to the user space daemon for
+		 * processing */
+		ieee->apdevstats.rx_packets++;
+		ieee->apdevstats.rx_bytes += skb->len;
+		prism2_rx_80211(ieee->apdev, skb, rx_stats, PRISM2_RX_MGMT);
+		return 0;
+	}
+
+	    if (ieee->iw_mode == IW_MODE_MASTER) {
+		if (type != WLAN_FC_TYPE_MGMT && type != WLAN_FC_TYPE_CTRL) {
+			printk(KERN_DEBUG "%s: unknown management frame "
+			       "(type=0x%02x, stype=0x%02x) dropped\n",
+			       skb->dev->name, type, stype);
+			return -1;
+		}
+
+		hostap_rx(skb->dev, skb, rx_stats);
+		return 0;
+	}
+
+	printk(KERN_DEBUG "%s: hostap_rx_frame_mgmt: management frame "
+	       "received in non-Host AP mode\n", skb->dev->name);
+	return -1;
+	#endif
+}
+
+
+
+/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */
+/* Ethernet-II snap header (RFC1042 for most EtherTypes) */
+static unsigned char rfc1042_header[] =
+{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
+/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */
+static unsigned char bridge_tunnel_header[] =
+{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
+/* No encapsulation header if EtherType < 0x600 (=length) */
+
+/* Called by ieee80211_rx_frame_decrypt */
+static int ieee80211_is_eapol_frame(struct ieee80211_device *ieee,
+				    struct sk_buff *skb, size_t hdrlen)
+{
+	struct net_device *dev = ieee->dev;
+	u16 fc, ethertype;
+	struct ieee80211_hdr_4addr *hdr;
+	u8 *pos;
+
+	if (skb->len < 24)
+		return 0;
+
+	hdr = (struct ieee80211_hdr_4addr *) skb->data;
+	fc = le16_to_cpu(hdr->frame_ctl);
+
+	/* check that the frame is unicast frame to us */
+	if ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) ==
+	    IEEE80211_FCTL_TODS &&
+	    memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN) == 0 &&
+	    memcmp(hdr->addr3, dev->dev_addr, ETH_ALEN) == 0) {
+		/* ToDS frame with own addr BSSID and DA */
+	} else if ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) ==
+		   IEEE80211_FCTL_FROMDS &&
+		   memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN) == 0) {
+		/* FromDS frame with own addr as DA */
+	} else
+		return 0;
+
+	if (skb->len < 24 + 8)
+		return 0;
+
+	/* check for port access entity Ethernet type */
+//	pos = skb->data + 24;
+	pos = skb->data + hdrlen;
+	ethertype = (pos[6] << 8) | pos[7];
+	if (ethertype == ETH_P_PAE)
+		return 1;
+
+	return 0;
+}
+
+/* Called only as a tasklet (software IRQ), by ieee80211_rx */
+static inline int
+ieee80211_rx_frame_decrypt(struct ieee80211_device* ieee, struct sk_buff *skb,
+			   struct ieee80211_crypt_data *crypt)
+{
+	struct ieee80211_hdr_4addr *hdr;
+	int res, hdrlen;
+
+	if (crypt == NULL || crypt->ops->decrypt_mpdu == NULL)
+		return 0;
+#if 1
+	if (ieee->hwsec_active)
+	{
+		cb_desc *tcb_desc = (cb_desc *)(skb->cb+ MAX_DEV_ADDR_SIZE);
+		tcb_desc->bHwSec = 1;
+	}
+#endif
+	hdr = (struct ieee80211_hdr_4addr *) skb->data;
+	hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
+
+#ifdef CONFIG_IEEE80211_CRYPT_TKIP
+	if (ieee->tkip_countermeasures &&
+	    strcmp(crypt->ops->name, "TKIP") == 0) {
+		if (net_ratelimit()) {
+			printk(KERN_DEBUG "%s: TKIP countermeasures: dropped "
+			       "received packet from " MAC_FMT "\n",
+			       ieee->dev->name, MAC_ARG(hdr->addr2));
+		}
+		return -1;
+	}
+#endif
+
+	atomic_inc(&crypt->refcnt);
+	res = crypt->ops->decrypt_mpdu(skb, hdrlen, crypt->priv);
+	atomic_dec(&crypt->refcnt);
+	if (res < 0) {
+		IEEE80211_DEBUG_DROP(
+			"decryption failed (SA=" MAC_FMT
+			") res=%d\n", MAC_ARG(hdr->addr2), res);
+		if (res == -2)
+			IEEE80211_DEBUG_DROP("Decryption failed ICV "
+					     "mismatch (key %d)\n",
+					     skb->data[hdrlen + 3] >> 6);
+		ieee->ieee_stats.rx_discards_undecryptable++;
+		return -1;
+	}
+
+	return res;
+}
+
+
+/* Called only as a tasklet (software IRQ), by ieee80211_rx */
+static inline int
+ieee80211_rx_frame_decrypt_msdu(struct ieee80211_device* ieee, struct sk_buff *skb,
+			     int keyidx, struct ieee80211_crypt_data *crypt)
+{
+	struct ieee80211_hdr_4addr *hdr;
+	int res, hdrlen;
+
+	if (crypt == NULL || crypt->ops->decrypt_msdu == NULL)
+		return 0;
+	if (ieee->hwsec_active)
+	{
+		cb_desc *tcb_desc = (cb_desc *)(skb->cb+ MAX_DEV_ADDR_SIZE);
+		tcb_desc->bHwSec = 1;
+	}
+
+	hdr = (struct ieee80211_hdr_4addr *) skb->data;
+	hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
+
+	atomic_inc(&crypt->refcnt);
+	res = crypt->ops->decrypt_msdu(skb, keyidx, hdrlen, crypt->priv);
+	atomic_dec(&crypt->refcnt);
+	if (res < 0) {
+		printk(KERN_DEBUG "%s: MSDU decryption/MIC verification failed"
+		       " (SA=" MAC_FMT " keyidx=%d)\n",
+		       ieee->dev->name, MAC_ARG(hdr->addr2), keyidx);
+		return -1;
+	}
+
+	return 0;
+}
+
+
+/* this function is stolen from ipw2200 driver*/
+#define IEEE_PACKET_RETRY_TIME (5*HZ)
+static int is_duplicate_packet(struct ieee80211_device *ieee,
+				      struct ieee80211_hdr_4addr *header)
+{
+	u16 fc = le16_to_cpu(header->frame_ctl);
+	u16 sc = le16_to_cpu(header->seq_ctl);
+	u16 seq = WLAN_GET_SEQ_SEQ(sc);
+	u16 frag = WLAN_GET_SEQ_FRAG(sc);
+	u16 *last_seq, *last_frag;
+	unsigned long *last_time;
+	struct ieee80211_hdr_3addrqos *hdr_3addrqos;
+	struct ieee80211_hdr_4addrqos *hdr_4addrqos;
+	u8 tid;
+
+
+	//TO2DS and QoS
+	if(((fc & IEEE80211_FCTL_DSTODS) == IEEE80211_FCTL_DSTODS)&&IEEE80211_QOS_HAS_SEQ(fc)) {
+	  hdr_4addrqos = (struct ieee80211_hdr_4addrqos *)header;
+	  tid = le16_to_cpu(hdr_4addrqos->qos_ctl) & IEEE80211_QCTL_TID;
+	  tid = UP2AC(tid);
+	  tid ++;
+	} else if(IEEE80211_QOS_HAS_SEQ(fc)) { //QoS
+	  hdr_3addrqos = (struct ieee80211_hdr_3addrqos*)header;
+	  tid = le16_to_cpu(hdr_3addrqos->qos_ctl) & IEEE80211_QCTL_TID;
+	  tid = UP2AC(tid);
+	  tid ++;
+	} else { // no QoS
+	  tid = 0;
+	}
+
+	switch (ieee->iw_mode) {
+	case IW_MODE_ADHOC:
+	{
+		struct list_head *p;
+		struct ieee_ibss_seq *entry = NULL;
+		u8 *mac = header->addr2;
+		int index = mac[5] % IEEE_IBSS_MAC_HASH_SIZE;
+		//for (pos = (head)->next; pos != (head); pos = pos->next)
+		//__list_for_each(p, &ieee->ibss_mac_hash[index]) {
+		list_for_each(p, &ieee->ibss_mac_hash[index]) {
+			entry = list_entry(p, struct ieee_ibss_seq, list);
+			if (!memcmp(entry->mac, mac, ETH_ALEN))
+				break;
+		}
+	//	if (memcmp(entry->mac, mac, ETH_ALEN)){
+		if (p == &ieee->ibss_mac_hash[index]) {
+			entry = kmalloc(sizeof(struct ieee_ibss_seq), GFP_ATOMIC);
+			if (!entry) {
+				printk(KERN_WARNING "Cannot malloc new mac entry\n");
+				return 0;
+			}
+			memcpy(entry->mac, mac, ETH_ALEN);
+			entry->seq_num[tid] = seq;
+			entry->frag_num[tid] = frag;
+			entry->packet_time[tid] = jiffies;
+			list_add(&entry->list, &ieee->ibss_mac_hash[index]);
+			return 0;
+		}
+		last_seq = &entry->seq_num[tid];
+		last_frag = &entry->frag_num[tid];
+		last_time = &entry->packet_time[tid];
+		break;
+	}
+
+	case IW_MODE_INFRA:
+		last_seq = &ieee->last_rxseq_num[tid];
+		last_frag = &ieee->last_rxfrag_num[tid];
+		last_time = &ieee->last_packet_time[tid];
+
+		break;
+	default:
+		return 0;
+	}
+
+//	if(tid != 0) {
+//		printk(KERN_WARNING ":)))))))))))%x %x %x, fc(%x)\n", tid, *last_seq, seq, header->frame_ctl);
+//	}
+	if ((*last_seq == seq) &&
+	    time_after(*last_time + IEEE_PACKET_RETRY_TIME, jiffies)) {
+		if (*last_frag == frag){
+			//printk(KERN_WARNING "[1] go drop!\n");
+			goto drop;
+
+		}
+		if (*last_frag + 1 != frag)
+			/* out-of-order fragment */
+			//printk(KERN_WARNING "[2] go drop!\n");
+			goto drop;
+	} else
+		*last_seq = seq;
+
+	*last_frag = frag;
+	*last_time = jiffies;
+	return 0;
+
+drop:
+//	BUG_ON(!(fc & IEEE80211_FCTL_RETRY));
+//	printk("DUP\n");
+
+	return 1;
+}
+bool
+AddReorderEntry(
+	PRX_TS_RECORD			pTS,
+	PRX_REORDER_ENTRY		pReorderEntry
+	)
+{
+	struct list_head *pList = &pTS->RxPendingPktList;
+#if  1
+	while(pList->next != &pTS->RxPendingPktList)
+	{
+		if( SN_LESS(pReorderEntry->SeqNum, ((PRX_REORDER_ENTRY)list_entry(pList->next,RX_REORDER_ENTRY,List))->SeqNum) )
+		{
+			pList = pList->next;
+		}
+		else if( SN_EQUAL(pReorderEntry->SeqNum, ((PRX_REORDER_ENTRY)list_entry(pList->next,RX_REORDER_ENTRY,List))->SeqNum) )
+		{
+			return false;
+		}
+		else
+		{
+			break;
+		}
+	}
+#endif
+	pReorderEntry->List.next = pList->next;
+	pReorderEntry->List.next->prev = &pReorderEntry->List;
+	pReorderEntry->List.prev = pList;
+	pList->next = &pReorderEntry->List;
+
+	return true;
+}
+
+void ieee80211_indicate_packets(struct ieee80211_device *ieee, struct ieee80211_rxb** prxbIndicateArray,u8  index)
+{
+	u8 i = 0 , j=0;
+	u16 ethertype;
+//	if(index > 1)
+//		IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): hahahahhhh, We indicate packet from reorder list, index is %u\n",__FUNCTION__,index);
+	for(j = 0; j<index; j++)
+	{
+//added by amy for reorder
+		struct ieee80211_rxb* prxb = prxbIndicateArray[j];
+		for(i = 0; i<prxb->nr_subframes; i++) {
+			struct sk_buff *sub_skb = prxb->subframes[i];
+
+		/* convert hdr + possible LLC headers into Ethernet header */
+			ethertype = (sub_skb->data[6] << 8) | sub_skb->data[7];
+			if (sub_skb->len >= 8 &&
+				((memcmp(sub_skb->data, rfc1042_header, SNAP_SIZE) == 0 &&
+				  ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) ||
+				 memcmp(sub_skb->data, bridge_tunnel_header, SNAP_SIZE) == 0)) {
+			/* remove RFC1042 or Bridge-Tunnel encapsulation and
+			 * replace EtherType */
+				skb_pull(sub_skb, SNAP_SIZE);
+				memcpy(skb_push(sub_skb, ETH_ALEN), prxb->src, ETH_ALEN);
+				memcpy(skb_push(sub_skb, ETH_ALEN), prxb->dst, ETH_ALEN);
+			} else {
+				u16 len;
+			/* Leave Ethernet header part of hdr and full payload */
+				len = htons(sub_skb->len);
+				memcpy(skb_push(sub_skb, 2), &len, 2);
+				memcpy(skb_push(sub_skb, ETH_ALEN), prxb->src, ETH_ALEN);
+				memcpy(skb_push(sub_skb, ETH_ALEN), prxb->dst, ETH_ALEN);
+			}
+			//stats->rx_packets++;
+			//stats->rx_bytes += sub_skb->len;
+
+		/* Indicat the packets to upper layer */
+			if (sub_skb) {
+				//printk("0skb_len(%d)\n", skb->len);
+				sub_skb->protocol = eth_type_trans(sub_skb, ieee->dev);
+				memset(sub_skb->cb, 0, sizeof(sub_skb->cb));
+				sub_skb->dev = ieee->dev;
+				sub_skb->ip_summed = CHECKSUM_NONE; /* 802.11 crc not sufficient */
+				//skb->ip_summed = CHECKSUM_UNNECESSARY; /* 802.11 crc not sufficient */
+				ieee->last_rx_ps_time = jiffies;
+				//printk("1skb_len(%d)\n", skb->len);
+				netif_rx(sub_skb);
+			}
+		}
+		kfree(prxb);
+		prxb = NULL;
+	}
+}
+
+
+void RxReorderIndicatePacket( struct ieee80211_device *ieee,
+		struct ieee80211_rxb* prxb,
+		PRX_TS_RECORD		pTS,
+		u16			SeqNum)
+{
+	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
+	PRX_REORDER_ENTRY 	pReorderEntry = NULL;
+	struct ieee80211_rxb* prxbIndicateArray[REORDER_WIN_SIZE];
+	u8			WinSize = pHTInfo->RxReorderWinSize;
+	u16			WinEnd = (pTS->RxIndicateSeq + WinSize -1)%4096;
+	u8			index = 0;
+	bool			bMatchWinStart = false, bPktInBuf = false;
+	IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): Seq is %d,pTS->RxIndicateSeq is %d, WinSize is %d\n",__FUNCTION__,SeqNum,pTS->RxIndicateSeq,WinSize);
+#if 0
+	if(!list_empty(&ieee->RxReorder_Unused_List))
+		IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): ieee->RxReorder_Unused_List is nut NULL\n");
+#endif
+	/* Rx Reorder initialize condition.*/
+	if(pTS->RxIndicateSeq == 0xffff) {
+		pTS->RxIndicateSeq = SeqNum;
+	}
+
+	/* Drop out the packet which SeqNum is smaller than WinStart */
+	if(SN_LESS(SeqNum, pTS->RxIndicateSeq)) {
+		IEEE80211_DEBUG(IEEE80211_DL_REORDER,"Packet Drop! IndicateSeq: %d, NewSeq: %d\n",
+				 pTS->RxIndicateSeq, SeqNum);
+		pHTInfo->RxReorderDropCounter++;
+		{
+			int i;
+			for(i =0; i < prxb->nr_subframes; i++) {
+				dev_kfree_skb(prxb->subframes[i]);
+			}
+			kfree(prxb);
+			prxb = NULL;
+		}
+		return;
+	}
+
+	/*
+	 * Sliding window manipulation. Conditions includes:
+	 * 1. Incoming SeqNum is equal to WinStart =>Window shift 1
+	 * 2. Incoming SeqNum is larger than the WinEnd => Window shift N
+	 */
+	if(SN_EQUAL(SeqNum, pTS->RxIndicateSeq)) {
+		pTS->RxIndicateSeq = (pTS->RxIndicateSeq + 1) % 4096;
+		bMatchWinStart = true;
+	} else if(SN_LESS(WinEnd, SeqNum)) {
+		if(SeqNum >= (WinSize - 1)) {
+			pTS->RxIndicateSeq = SeqNum + 1 -WinSize;
+		} else {
+			pTS->RxIndicateSeq = 4095 - (WinSize - (SeqNum +1)) + 1;
+		}
+		IEEE80211_DEBUG(IEEE80211_DL_REORDER, "Window Shift! IndicateSeq: %d, NewSeq: %d\n",pTS->RxIndicateSeq, SeqNum);
+	}
+
+	/*
+	 * Indication process.
+	 * After Packet dropping and Sliding Window shifting as above, we can now just indicate the packets
+	 * with the SeqNum smaller than latest WinStart and buffer other packets.
+	 */
+	/* For Rx Reorder condition:
+	 * 1. All packets with SeqNum smaller than WinStart => Indicate
+	 * 2. All packets with SeqNum larger than or equal to WinStart => Buffer it.
+	 */
+	if(bMatchWinStart) {
+		/* Current packet is going to be indicated.*/
+		IEEE80211_DEBUG(IEEE80211_DL_REORDER, "Packets indication!! IndicateSeq: %d, NewSeq: %d\n",\
+				pTS->RxIndicateSeq, SeqNum);
+		prxbIndicateArray[0] = prxb;
+//		printk("========================>%s(): SeqNum is %d\n",__FUNCTION__,SeqNum);
+		index = 1;
+	} else {
+		/* Current packet is going to be inserted into pending list.*/
+		//IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): We RX no ordered packed, insert to orderd list\n",__FUNCTION__);
+		if(!list_empty(&ieee->RxReorder_Unused_List)) {
+			pReorderEntry = (PRX_REORDER_ENTRY)list_entry(ieee->RxReorder_Unused_List.next,RX_REORDER_ENTRY,List);
+			list_del_init(&pReorderEntry->List);
+
+			/* Make a reorder entry and insert into a the packet list.*/
+			pReorderEntry->SeqNum = SeqNum;
+			pReorderEntry->prxb = prxb;
+	//		IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): pREorderEntry->SeqNum is %d\n",__FUNCTION__,pReorderEntry->SeqNum);
+
+#if 1
+			if(!AddReorderEntry(pTS, pReorderEntry)) {
+				IEEE80211_DEBUG(IEEE80211_DL_REORDER, "%s(): Duplicate packet is dropped!! IndicateSeq: %d, NewSeq: %d\n",
+					__FUNCTION__, pTS->RxIndicateSeq, SeqNum);
+				list_add_tail(&pReorderEntry->List,&ieee->RxReorder_Unused_List);
+				{
+					int i;
+					for(i =0; i < prxb->nr_subframes; i++) {
+						dev_kfree_skb(prxb->subframes[i]);
+					}
+					kfree(prxb);
+					prxb = NULL;
+				}
+			} else {
+				IEEE80211_DEBUG(IEEE80211_DL_REORDER,
+					 "Pkt insert into buffer!! IndicateSeq: %d, NewSeq: %d\n",pTS->RxIndicateSeq, SeqNum);
+			}
+#endif
+		}
+		else {
+			/*
+			 * Packets are dropped if there is not enough reorder entries.
+			 * This part shall be modified!! We can just indicate all the
+			 * packets in buffer and get reorder entries.
+			 */
+			IEEE80211_DEBUG(IEEE80211_DL_ERR, "RxReorderIndicatePacket(): There is no reorder entry!! Packet is dropped!!\n");
+			{
+				int i;
+				for(i =0; i < prxb->nr_subframes; i++) {
+					dev_kfree_skb(prxb->subframes[i]);
+				}
+				kfree(prxb);
+				prxb = NULL;
+			}
+		}
+	}
+
+	/* Check if there is any packet need indicate.*/
+	while(!list_empty(&pTS->RxPendingPktList)) {
+		IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): start RREORDER indicate\n",__FUNCTION__);
+#if 1
+		pReorderEntry = (PRX_REORDER_ENTRY)list_entry(pTS->RxPendingPktList.prev,RX_REORDER_ENTRY,List);
+		if( SN_LESS(pReorderEntry->SeqNum, pTS->RxIndicateSeq) ||
+				SN_EQUAL(pReorderEntry->SeqNum, pTS->RxIndicateSeq))
+		{
+			/* This protect buffer from overflow. */
+			if(index >= REORDER_WIN_SIZE) {
+				IEEE80211_DEBUG(IEEE80211_DL_ERR, "RxReorderIndicatePacket(): Buffer overflow!! \n");
+				bPktInBuf = true;
+				break;
+			}
+
+			list_del_init(&pReorderEntry->List);
+
+			if(SN_EQUAL(pReorderEntry->SeqNum, pTS->RxIndicateSeq))
+				pTS->RxIndicateSeq = (pTS->RxIndicateSeq + 1) % 4096;
+
+			IEEE80211_DEBUG(IEEE80211_DL_REORDER,"Packets indication!! IndicateSeq: %d, NewSeq: %d\n",pTS->RxIndicateSeq, SeqNum);
+			prxbIndicateArray[index] = pReorderEntry->prxb;
+		//	printk("========================>%s(): pReorderEntry->SeqNum is %d\n",__FUNCTION__,pReorderEntry->SeqNum);
+			index++;
+
+			list_add_tail(&pReorderEntry->List,&ieee->RxReorder_Unused_List);
+		} else {
+			bPktInBuf = true;
+			break;
+		}
+#endif
+	}
+
+	/* Handling pending timer. Set this timer to prevent from long time Rx buffering.*/
+	if(index>0) {
+		// Cancel previous pending timer.
+		if(timer_pending(&pTS->RxPktPendingTimer))
+		{
+			del_timer_sync(&pTS->RxPktPendingTimer);
+		}
+	//	del_timer_sync(&pTS->RxPktPendingTimer);
+		pTS->RxTimeoutIndicateSeq = 0xffff;
+
+		// Indicate packets
+		if(index>REORDER_WIN_SIZE){
+			IEEE80211_DEBUG(IEEE80211_DL_ERR, "RxReorderIndicatePacket(): Rx Reorer buffer full!! \n");
+			return;
+		}
+		ieee80211_indicate_packets(ieee, prxbIndicateArray, index);
+		bPktInBuf = false;
+	}
+
+#if 1
+	if(bPktInBuf && pTS->RxTimeoutIndicateSeq==0xffff) {
+		// Set new pending timer.
+		IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): SET rx timeout timer\n", __FUNCTION__);
+		pTS->RxTimeoutIndicateSeq = pTS->RxIndicateSeq;
+#if 0
+		if(timer_pending(&pTS->RxPktPendingTimer))
+			del_timer_sync(&pTS->RxPktPendingTimer);
+		pTS->RxPktPendingTimer.expires = jiffies + MSECS(pHTInfo->RxReorderPendingTime);
+		add_timer(&pTS->RxPktPendingTimer);
+#else
+		mod_timer(&pTS->RxPktPendingTimer,  jiffies + MSECS(pHTInfo->RxReorderPendingTime));
+#endif
+	}
+#endif
+}
+
+u8 parse_subframe(struct sk_buff *skb,
+                  struct ieee80211_rx_stats *rx_stats,
+		  struct ieee80211_rxb *rxb,u8* src,u8* dst)
+{
+	struct ieee80211_hdr_3addr  *hdr = (struct ieee80211_hdr_3addr* )skb->data;
+	u16		fc = le16_to_cpu(hdr->frame_ctl);
+
+	u16		LLCOffset= sizeof(struct ieee80211_hdr_3addr);
+	u16		ChkLength;
+	bool		bIsAggregateFrame = false;
+	u16		nSubframe_Length;
+	u8		nPadding_Length = 0;
+	u16		SeqNum=0;
+
+	struct sk_buff *sub_skb;
+	u8             *data_ptr;
+	/* just for debug purpose */
+	SeqNum = WLAN_GET_SEQ_SEQ(le16_to_cpu(hdr->seq_ctl));
+
+	if((IEEE80211_QOS_HAS_SEQ(fc))&&\
+			(((frameqos *)(skb->data + IEEE80211_3ADDR_LEN))->field.reserved)) {
+		bIsAggregateFrame = true;
+	}
+
+	if(IEEE80211_QOS_HAS_SEQ(fc)) {
+		LLCOffset += 2;
+	}
+
+	if(rx_stats->bContainHTC) {
+		LLCOffset += sHTCLng;
+	}
+	//printk("ChkLength = %d\n", LLCOffset);
+	// Null packet, don't indicate it to upper layer
+	ChkLength = LLCOffset;/* + (Frame_WEP(frame)!=0 ?Adapter->MgntInfo.SecurityInfo.EncryptionHeadOverhead:0);*/
+
+	if( skb->len <= ChkLength ) {
+		return 0;
+	}
+
+	skb_pull(skb, LLCOffset);
+
+	if(!bIsAggregateFrame) {
+		rxb->nr_subframes = 1;
+#ifdef JOHN_NOCPY
+		rxb->subframes[0] = skb;
+#else
+		rxb->subframes[0] = skb_copy(skb, GFP_ATOMIC);
+#endif
+
+		memcpy(rxb->src,src,ETH_ALEN);
+		memcpy(rxb->dst,dst,ETH_ALEN);
+		//IEEE80211_DEBUG_DATA(IEEE80211_DL_RX,skb->data,skb->len);
+		return 1;
+	} else {
+		rxb->nr_subframes = 0;
+		memcpy(rxb->src,src,ETH_ALEN);
+		memcpy(rxb->dst,dst,ETH_ALEN);
+		while(skb->len > ETHERNET_HEADER_SIZE) {
+			/* Offset 12 denote 2 mac address */
+			nSubframe_Length = *((u16*)(skb->data + 12));
+			//==m==>change the length order
+			nSubframe_Length = (nSubframe_Length>>8) + (nSubframe_Length<<8);
+
+			if(skb->len<(ETHERNET_HEADER_SIZE + nSubframe_Length)) {
+#if 0//cosa
+				RT_ASSERT(
+						(nRemain_Length>=(ETHERNET_HEADER_SIZE + nSubframe_Length)),
+						("ParseSubframe(): A-MSDU subframe parse error!! Subframe Length: %d\n", nSubframe_Length) );
+#endif
+				printk("%s: A-MSDU parse error!! pRfd->nTotalSubframe : %d\n",\
+						__FUNCTION__,rxb->nr_subframes);
+				printk("%s: A-MSDU parse error!! Subframe Length: %d\n",__FUNCTION__, nSubframe_Length);
+				printk("nRemain_Length is %d and nSubframe_Length is : %d\n",skb->len,nSubframe_Length);
+				printk("The Packet SeqNum is %d\n",SeqNum);
+				return 0;
+			}
+
+			/* move the data point to data content */
+			skb_pull(skb, ETHERNET_HEADER_SIZE);
+
+#ifdef JOHN_NOCPY
+			sub_skb = skb_clone(skb, GFP_ATOMIC);
+			sub_skb->len = nSubframe_Length;
+			sub_skb->tail = sub_skb->data + nSubframe_Length;
+#else
+			/* Allocate new skb for releasing to upper layer */
+			sub_skb = dev_alloc_skb(nSubframe_Length + 12);
+			skb_reserve(sub_skb, 12);
+			data_ptr = (u8 *)skb_put(sub_skb, nSubframe_Length);
+			memcpy(data_ptr,skb->data,nSubframe_Length);
+#endif
+			rxb->subframes[rxb->nr_subframes++] = sub_skb;
+			if(rxb->nr_subframes >= MAX_SUBFRAME_COUNT) {
+				IEEE80211_DEBUG_RX("ParseSubframe(): Too many Subframes! Packets dropped!\n");
+				break;
+			}
+			skb_pull(skb,nSubframe_Length);
+
+			if(skb->len != 0) {
+				nPadding_Length = 4 - ((nSubframe_Length + ETHERNET_HEADER_SIZE) % 4);
+				if(nPadding_Length == 4) {
+					nPadding_Length = 0;
+				}
+
+				if(skb->len < nPadding_Length) {
+					return 0;
+				}
+
+				skb_pull(skb,nPadding_Length);
+			}
+		}
+#ifdef JOHN_NOCPY
+		dev_kfree_skb(skb);
+#endif
+		//{just for debug added by david
+		//printk("AMSDU::rxb->nr_subframes = %d\n",rxb->nr_subframes);
+		//}
+		return rxb->nr_subframes;
+	}
+}
+
+/* All received frames are sent to this function. @skb contains the frame in
+ * IEEE 802.11 format, i.e., in the format it was sent over air.
+ * This function is called only as a tasklet (software IRQ). */
+int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
+		 struct ieee80211_rx_stats *rx_stats)
+{
+	struct net_device *dev = ieee->dev;
+	struct ieee80211_hdr_4addr *hdr;
+	//struct ieee80211_hdr_3addrqos *hdr;
+
+	size_t hdrlen;
+	u16 fc, type, stype, sc;
+	struct net_device_stats *stats;
+	unsigned int frag;
+	u8 *payload;
+	u16 ethertype;
+	//added by amy for reorder
+	u8	TID = 0;
+	u16	SeqNum = 0;
+	PRX_TS_RECORD pTS = NULL;
+	//bool bIsAggregateFrame = false;
+	//added by amy for reorder
+#ifdef NOT_YET
+	struct net_device *wds = NULL;
+	struct sk_buff *skb2 = NULL;
+	struct net_device *wds = NULL;
+	int frame_authorized = 0;
+	int from_assoc_ap = 0;
+	void *sta = NULL;
+#endif
+//	u16 qos_ctl = 0;
+	u8 dst[ETH_ALEN];
+	u8 src[ETH_ALEN];
+	u8 bssid[ETH_ALEN];
+	struct ieee80211_crypt_data *crypt = NULL;
+	int keyidx = 0;
+
+	int i;
+	struct ieee80211_rxb* rxb = NULL;
+	// cheat the the hdr type
+	hdr = (struct ieee80211_hdr_4addr *)skb->data;
+	stats = &ieee->stats;
+
+	if (skb->len < 10) {
+		printk(KERN_INFO "%s: SKB length < 10\n",
+		       dev->name);
+		goto rx_dropped;
+	}
+
+	fc = le16_to_cpu(hdr->frame_ctl);
+	type = WLAN_FC_GET_TYPE(fc);
+	stype = WLAN_FC_GET_STYPE(fc);
+	sc = le16_to_cpu(hdr->seq_ctl);
+
+	frag = WLAN_GET_SEQ_FRAG(sc);
+	hdrlen = ieee80211_get_hdrlen(fc);
+
+	if(HTCCheck(ieee, skb->data))
+	{
+		if(net_ratelimit())
+		printk("find HTCControl\n");
+		hdrlen += 4;
+		rx_stats->bContainHTC = 1;
+	}
+
+	//IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, skb->data, skb->len);
+#ifdef NOT_YET
+#if WIRELESS_EXT > 15
+	/* Put this code here so that we avoid duplicating it in all
+	 * Rx paths. - Jean II */
+#ifdef IW_WIRELESS_SPY		/* defined in iw_handler.h */
+	/* If spy monitoring on */
+	if (iface->spy_data.spy_number > 0) {
+		struct iw_quality wstats;
+		wstats.level = rx_stats->rssi;
+		wstats.noise = rx_stats->noise;
+		wstats.updated = 6;	/* No qual value */
+		/* Update spy records */
+		wireless_spy_update(dev, hdr->addr2, &wstats);
+	}
+#endif /* IW_WIRELESS_SPY */
+#endif /* WIRELESS_EXT > 15 */
+	hostap_update_rx_stats(local->ap, hdr, rx_stats);
+#endif
+
+#if WIRELESS_EXT > 15
+	if (ieee->iw_mode == IW_MODE_MONITOR) {
+		ieee80211_monitor_rx(ieee, skb, rx_stats);
+		stats->rx_packets++;
+		stats->rx_bytes += skb->len;
+		return 1;
+	}
+#endif
+	if (ieee->host_decrypt) {
+		int idx = 0;
+		if (skb->len >= hdrlen + 3)
+			idx = skb->data[hdrlen + 3] >> 6;
+		crypt = ieee->crypt[idx];
+#ifdef NOT_YET
+		sta = NULL;
+
+		/* Use station specific key to override default keys if the
+		 * receiver address is a unicast address ("individual RA"). If
+		 * bcrx_sta_key parameter is set, station specific key is used
+		 * even with broad/multicast targets (this is against IEEE
+		 * 802.11, but makes it easier to use different keys with
+		 * stations that do not support WEP key mapping). */
+
+		if (!(hdr->addr1[0] & 0x01) || local->bcrx_sta_key)
+			(void) hostap_handle_sta_crypto(local, hdr, &crypt,
+							&sta);
+#endif
+
+		/* allow NULL decrypt to indicate an station specific override
+		 * for default encryption */
+		if (crypt && (crypt->ops == NULL ||
+			      crypt->ops->decrypt_mpdu == NULL))
+			crypt = NULL;
+
+		if (!crypt && (fc & IEEE80211_FCTL_WEP)) {
+			/* This seems to be triggered by some (multicast?)
+			 * frames from other than current BSS, so just drop the
+			 * frames silently instead of filling system log with
+			 * these reports. */
+			IEEE80211_DEBUG_DROP("Decryption failed (not set)"
+					     " (SA=" MAC_FMT ")\n",
+					     MAC_ARG(hdr->addr2));
+			ieee->ieee_stats.rx_discards_undecryptable++;
+			goto rx_dropped;
+		}
+	}
+
+	if (skb->len < IEEE80211_DATA_HDR3_LEN)
+		goto rx_dropped;
+
+	// if QoS enabled, should check the sequence for each of the AC
+	if( (ieee->pHTInfo->bCurRxReorderEnable == false) || !ieee->current_network.qos_data.active|| !IsDataFrame(skb->data) || IsLegacyDataFrame(skb->data)){
+		if (is_duplicate_packet(ieee, hdr))
+		goto rx_dropped;
+
+	}
+	else
+	{
+		PRX_TS_RECORD pRxTS = NULL;
+	#if 0
+		struct ieee80211_hdr_3addr *hdr;
+		u16 fc;
+		hdr = (struct ieee80211_hdr_3addr *)skb->data;
+		fc = le16_to_cpu(hdr->frame_ctl);
+		u8 tmp = (fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS);
+
+		u8 tid = (*((u8*)skb->data + (((fc& IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS))?30:24)))&0xf;
+		printk("====================>fc:%x, tid:%d, tmp:%d\n", fc, tid, tmp);
+		//u8 tid =  (u8)((frameqos*)(buf + ((fc & IEEE80211_FCTL_TODS)&&(fc & IEEE80211_FCTL_FROMDS))? 30 : 24))->field.tid;
+	#endif
+			//IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): QOS ENABLE AND RECEIVE QOS DATA , we will get Ts, tid:%d\n",__FUNCTION__, tid);
+#if 1
+		if(GetTs(
+				ieee,
+				(PTS_COMMON_INFO*) &pRxTS,
+				hdr->addr2,
+				(u8)Frame_QoSTID((u8*)(skb->data)),
+				RX_DIR,
+				true))
+		{
+
+		//	IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): pRxTS->RxLastFragNum is %d,frag is %d,pRxTS->RxLastSeqNum is %d,seq is %d\n",__FUNCTION__,pRxTS->RxLastFragNum,frag,pRxTS->RxLastSeqNum,WLAN_GET_SEQ_SEQ(sc));
+			if( 	(fc & (1<<11))  &&
+					(frag == pRxTS->RxLastFragNum) &&
+					(WLAN_GET_SEQ_SEQ(sc) == pRxTS->RxLastSeqNum)	)
+			{
+				goto rx_dropped;
+			}
+			else
+			{
+				pRxTS->RxLastFragNum = frag;
+				pRxTS->RxLastSeqNum = WLAN_GET_SEQ_SEQ(sc);
+			}
+		}
+		else
+		{
+			IEEE80211_DEBUG(IEEE80211_DL_ERR, "%s(): No TS!! Skip the check!!\n",__FUNCTION__);
+			goto rx_dropped;
+		}
+	}
+#endif
+	if (type == IEEE80211_FTYPE_MGMT) {
+
+	#if 0
+		if ( stype == IEEE80211_STYPE_AUTH &&
+		    fc & IEEE80211_FCTL_WEP && ieee->host_decrypt &&
+		    (keyidx = hostap_rx_frame_decrypt(ieee, skb, crypt)) < 0)
+		{
+			printk(KERN_DEBUG "%s: failed to decrypt mgmt::auth "
+			       "from " MAC_FMT "\n", dev->name,
+			       MAC_ARG(hdr->addr2));
+			/* TODO: could inform hostapd about this so that it
+			 * could send auth failure report */
+			goto rx_dropped;
+		}
+	#endif
+
+	//IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, skb->data, skb->len);
+		if (ieee80211_rx_frame_mgmt(ieee, skb, rx_stats, type, stype))
+			goto rx_dropped;
+		else
+			goto rx_exit;
+	}
+
+	/* Data frame - extract src/dst addresses */
+	switch (fc & (IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS)) {
+	case IEEE80211_FCTL_FROMDS:
+		memcpy(dst, hdr->addr1, ETH_ALEN);
+		memcpy(src, hdr->addr3, ETH_ALEN);
+		memcpy(bssid, hdr->addr2, ETH_ALEN);
+		break;
+	case IEEE80211_FCTL_TODS:
+		memcpy(dst, hdr->addr3, ETH_ALEN);
+		memcpy(src, hdr->addr2, ETH_ALEN);
+		memcpy(bssid, hdr->addr1, ETH_ALEN);
+		break;
+	case IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS:
+		if (skb->len < IEEE80211_DATA_HDR4_LEN)
+			goto rx_dropped;
+		memcpy(dst, hdr->addr3, ETH_ALEN);
+		memcpy(src, hdr->addr4, ETH_ALEN);
+		memcpy(bssid, ieee->current_network.bssid, ETH_ALEN);
+		break;
+	case 0:
+		memcpy(dst, hdr->addr1, ETH_ALEN);
+		memcpy(src, hdr->addr2, ETH_ALEN);
+		memcpy(bssid, hdr->addr3, ETH_ALEN);
+		break;
+	}
+
+#ifdef NOT_YET
+	if (hostap_rx_frame_wds(ieee, hdr, fc, &wds))
+		goto rx_dropped;
+	if (wds) {
+		skb->dev = dev = wds;
+		stats = hostap_get_stats(dev);
+	}
+
+	if (ieee->iw_mode == IW_MODE_MASTER && !wds &&
+	    (fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) == IEEE80211_FCTL_FROMDS &&
+	    ieee->stadev &&
+	    memcmp(hdr->addr2, ieee->assoc_ap_addr, ETH_ALEN) == 0) {
+		/* Frame from BSSID of the AP for which we are a client */
+		skb->dev = dev = ieee->stadev;
+		stats = hostap_get_stats(dev);
+		from_assoc_ap = 1;
+	}
+#endif
+
+	dev->last_rx = jiffies;
+
+#ifdef NOT_YET
+	if ((ieee->iw_mode == IW_MODE_MASTER ||
+	     ieee->iw_mode == IW_MODE_REPEAT) &&
+	    !from_assoc_ap) {
+		switch (hostap_handle_sta_rx(ieee, dev, skb, rx_stats,
+					     wds != NULL)) {
+		case AP_RX_CONTINUE_NOT_AUTHORIZED:
+			frame_authorized = 0;
+			break;
+		case AP_RX_CONTINUE:
+			frame_authorized = 1;
+			break;
+		case AP_RX_DROP:
+			goto rx_dropped;
+		case AP_RX_EXIT:
+			goto rx_exit;
+		}
+	}
+#endif
+	//IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, skb->data, skb->len);
+	/* Nullfunc frames may have PS-bit set, so they must be passed to
+	 * hostap_handle_sta_rx() before being dropped here. */
+	if (stype != IEEE80211_STYPE_DATA &&
+	    stype != IEEE80211_STYPE_DATA_CFACK &&
+	    stype != IEEE80211_STYPE_DATA_CFPOLL &&
+	    stype != IEEE80211_STYPE_DATA_CFACKPOLL&&
+	    stype != IEEE80211_STYPE_QOS_DATA//add by David,2006.8.4
+	    ) {
+		if (stype != IEEE80211_STYPE_NULLFUNC)
+			IEEE80211_DEBUG_DROP(
+				"RX: dropped data frame "
+				"with no data (type=0x%02x, "
+				"subtype=0x%02x, len=%d)\n",
+				type, stype, skb->len);
+		goto rx_dropped;
+	}
+        if (memcmp(bssid, ieee->current_network.bssid, ETH_ALEN))
+                goto rx_dropped;
+
+	/* skb: hdr + (possibly fragmented, possibly encrypted) payload */
+
+	if (ieee->host_decrypt && (fc & IEEE80211_FCTL_WEP) &&
+	    (keyidx = ieee80211_rx_frame_decrypt(ieee, skb, crypt)) < 0)
+	{
+		printk("decrypt frame error\n");
+		goto rx_dropped;
+	}
+
+
+	hdr = (struct ieee80211_hdr_4addr *) skb->data;
+
+	/* skb: hdr + (possibly fragmented) plaintext payload */
+	// PR: FIXME: hostap has additional conditions in the "if" below:
+	// ieee->host_decrypt && (fc & IEEE80211_FCTL_WEP) &&
+	if ((frag != 0 || (fc & IEEE80211_FCTL_MOREFRAGS))) {
+		int flen;
+		struct sk_buff *frag_skb = ieee80211_frag_cache_get(ieee, hdr);
+		IEEE80211_DEBUG_FRAG("Rx Fragment received (%u)\n", frag);
+
+		if (!frag_skb) {
+			IEEE80211_DEBUG(IEEE80211_DL_RX | IEEE80211_DL_FRAG,
+					"Rx cannot get skb from fragment "
+					"cache (morefrag=%d seq=%u frag=%u)\n",
+					(fc & IEEE80211_FCTL_MOREFRAGS) != 0,
+					WLAN_GET_SEQ_SEQ(sc), frag);
+			goto rx_dropped;
+		}
+		flen = skb->len;
+		if (frag != 0)
+			flen -= hdrlen;
+
+		if (frag_skb->tail + flen > frag_skb->end) {
+			printk(KERN_WARNING "%s: host decrypted and "
+			       "reassembled frame did not fit skb\n",
+			       dev->name);
+			ieee80211_frag_cache_invalidate(ieee, hdr);
+			goto rx_dropped;
+		}
+
+		if (frag == 0) {
+			/* copy first fragment (including full headers) into
+			 * beginning of the fragment cache skb */
+			memcpy(skb_put(frag_skb, flen), skb->data, flen);
+		} else {
+			/* append frame payload to the end of the fragment
+			 * cache skb */
+			memcpy(skb_put(frag_skb, flen), skb->data + hdrlen,
+			       flen);
+		}
+		dev_kfree_skb_any(skb);
+		skb = NULL;
+
+		if (fc & IEEE80211_FCTL_MOREFRAGS) {
+			/* more fragments expected - leave the skb in fragment
+			 * cache for now; it will be delivered to upper layers
+			 * after all fragments have been received */
+			goto rx_exit;
+		}
+
+		/* this was the last fragment and the frame will be
+		 * delivered, so remove skb from fragment cache */
+		skb = frag_skb;
+		hdr = (struct ieee80211_hdr_4addr *) skb->data;
+		ieee80211_frag_cache_invalidate(ieee, hdr);
+	}
+
+	/* skb: hdr + (possible reassembled) full MSDU payload; possibly still
+	 * encrypted/authenticated */
+	if (ieee->host_decrypt && (fc & IEEE80211_FCTL_WEP) &&
+	    ieee80211_rx_frame_decrypt_msdu(ieee, skb, keyidx, crypt))
+	{
+		printk("==>decrypt msdu error\n");
+		goto rx_dropped;
+	}
+
+	//added by amy for AP roaming
+	ieee->LinkDetectInfo.NumRecvDataInPeriod++;
+	ieee->LinkDetectInfo.NumRxOkInPeriod++;
+
+	hdr = (struct ieee80211_hdr_4addr *) skb->data;
+	if (crypt && !(fc & IEEE80211_FCTL_WEP) && !ieee->open_wep) {
+		if (/*ieee->ieee802_1x &&*/
+		    ieee80211_is_eapol_frame(ieee, skb, hdrlen)) {
+
+#ifdef CONFIG_IEEE80211_DEBUG
+			/* pass unencrypted EAPOL frames even if encryption is
+			 * configured */
+			struct eapol *eap = (struct eapol *)(skb->data +
+				24);
+			IEEE80211_DEBUG_EAP("RX: IEEE 802.1X EAPOL frame: %s\n",
+						eap_get_type(eap->type));
+#endif
+		} else {
+			IEEE80211_DEBUG_DROP(
+				"encryption configured, but RX "
+				"frame not encrypted (SA=" MAC_FMT ")\n",
+				MAC_ARG(hdr->addr2));
+			goto rx_dropped;
+		}
+	}
+
+#ifdef CONFIG_IEEE80211_DEBUG
+	if (crypt && !(fc & IEEE80211_FCTL_WEP) &&
+	    ieee80211_is_eapol_frame(ieee, skb, hdrlen)) {
+			struct eapol *eap = (struct eapol *)(skb->data +
+				24);
+			IEEE80211_DEBUG_EAP("RX: IEEE 802.1X EAPOL frame: %s\n",
+						eap_get_type(eap->type));
+	}
+#endif
+
+	if (crypt && !(fc & IEEE80211_FCTL_WEP) && !ieee->open_wep &&
+	    !ieee80211_is_eapol_frame(ieee, skb, hdrlen)) {
+		IEEE80211_DEBUG_DROP(
+			"dropped unencrypted RX data "
+			"frame from " MAC_FMT
+			" (drop_unencrypted=1)\n",
+			MAC_ARG(hdr->addr2));
+		goto rx_dropped;
+	}
+/*
+	if(ieee80211_is_eapol_frame(ieee, skb, hdrlen)) {
+		printk(KERN_WARNING "RX: IEEE802.1X EPAOL frame!\n");
+	}
+*/
+//added by amy for reorder
+#if 1
+	if(ieee->current_network.qos_data.active && IsQoSDataFrame(skb->data)
+		&& !is_multicast_ether_addr(hdr->addr1) && !is_broadcast_ether_addr(hdr->addr1))
+	{
+		TID = Frame_QoSTID(skb->data);
+		SeqNum = WLAN_GET_SEQ_SEQ(sc);
+		GetTs(ieee,(PTS_COMMON_INFO*) &pTS,hdr->addr2,TID,RX_DIR,true);
+		if(TID !=0 && TID !=3)
+		{
+			ieee->bis_any_nonbepkts = true;
+		}
+	}
+#endif
+//added by amy for reorder
+	/* skb: hdr + (possible reassembled) full plaintext payload */
+	payload = skb->data + hdrlen;
+	//ethertype = (payload[6] << 8) | payload[7];
+	rxb = (struct ieee80211_rxb*)kmalloc(sizeof(struct ieee80211_rxb),GFP_ATOMIC);
+	if(rxb == NULL)
+	{
+		IEEE80211_DEBUG(IEEE80211_DL_ERR,"%s(): kmalloc rxb error\n",__FUNCTION__);
+		goto rx_dropped;
+	}
+	/* to parse amsdu packets */
+	/* qos data packets & reserved bit is 1 */
+	if(parse_subframe(skb,rx_stats,rxb,src,dst) == 0) {
+		/* only to free rxb, and not submit the packets to upper layer */
+		for(i =0; i < rxb->nr_subframes; i++) {
+			dev_kfree_skb(rxb->subframes[i]);
+		}
+		kfree(rxb);
+		rxb = NULL;
+		goto rx_dropped;
+	}
+
+	ieee->last_rx_ps_time = jiffies;
+//added by amy for reorder
+	if(ieee->pHTInfo->bCurRxReorderEnable == false ||pTS == NULL){
+//added by amy for reorder
+		for(i = 0; i<rxb->nr_subframes; i++) {
+			struct sk_buff *sub_skb = rxb->subframes[i];
+
+			if (sub_skb) {
+				/* convert hdr + possible LLC headers into Ethernet header */
+				ethertype = (sub_skb->data[6] << 8) | sub_skb->data[7];
+				if (sub_skb->len >= 8 &&
+						((memcmp(sub_skb->data, rfc1042_header, SNAP_SIZE) == 0 &&
+						  ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) ||
+						 memcmp(sub_skb->data, bridge_tunnel_header, SNAP_SIZE) == 0)) {
+					/* remove RFC1042 or Bridge-Tunnel encapsulation and
+					 * replace EtherType */
+					skb_pull(sub_skb, SNAP_SIZE);
+					memcpy(skb_push(sub_skb, ETH_ALEN), src, ETH_ALEN);
+					memcpy(skb_push(sub_skb, ETH_ALEN), dst, ETH_ALEN);
+				} else {
+					u16 len;
+					/* Leave Ethernet header part of hdr and full payload */
+					len = htons(sub_skb->len);
+					memcpy(skb_push(sub_skb, 2), &len, 2);
+					memcpy(skb_push(sub_skb, ETH_ALEN), src, ETH_ALEN);
+					memcpy(skb_push(sub_skb, ETH_ALEN), dst, ETH_ALEN);
+				}
+
+				stats->rx_packets++;
+				stats->rx_bytes += sub_skb->len;
+				if(is_multicast_ether_addr(dst)) {
+					stats->multicast++;
+				}
+
+				/* Indicat the packets to upper layer */
+				//printk("0skb_len(%d)\n", skb->len);
+				sub_skb->protocol = eth_type_trans(sub_skb, dev);
+				memset(sub_skb->cb, 0, sizeof(sub_skb->cb));
+				sub_skb->dev = dev;
+				sub_skb->ip_summed = CHECKSUM_NONE; /* 802.11 crc not sufficient */
+				//skb->ip_summed = CHECKSUM_UNNECESSARY; /* 802.11 crc not sufficient */
+				//printk("1skb_len(%d)\n", skb->len);
+				netif_rx(sub_skb);
+			}
+		}
+		kfree(rxb);
+		rxb = NULL;
+
+	}
+	else
+	{
+		IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): REORDER ENABLE AND PTS not NULL, and we will enter RxReorderIndicatePacket()\n",__FUNCTION__);
+		RxReorderIndicatePacket(ieee, rxb, pTS, SeqNum);
+	}
+#ifndef JOHN_NOCPY
+	dev_kfree_skb(skb);
+#endif
+
+ rx_exit:
+#ifdef NOT_YET
+	if (sta)
+		hostap_handle_sta_release(sta);
+#endif
+	return 1;
+
+ rx_dropped:
+	if (rxb != NULL)
+	{
+		kfree(rxb);
+		rxb = NULL;
+	}
+	stats->rx_dropped++;
+
+	/* Returning 0 indicates to caller that we have not handled the SKB--
+	 * so it is still allocated and can be used again by underlying
+	 * hardware as a DMA target */
+	return 0;
+}
+
+#define MGMT_FRAME_FIXED_PART_LENGTH            0x24
+
+static u8 qos_oui[QOS_OUI_LEN] = { 0x00, 0x50, 0xF2 };
+
+/*
+* Make ther structure we read from the beacon packet has
+* the right values
+*/
+static int ieee80211_verify_qos_info(struct ieee80211_qos_information_element
+                                     *info_element, int sub_type)
+{
+
+        if (info_element->qui_subtype != sub_type)
+                return -1;
+        if (memcmp(info_element->qui, qos_oui, QOS_OUI_LEN))
+                return -1;
+        if (info_element->qui_type != QOS_OUI_TYPE)
+                return -1;
+        if (info_element->version != QOS_VERSION_1)
+                return -1;
+
+        return 0;
+}
+
+
+/*
+ * Parse a QoS parameter element
+ */
+static int ieee80211_read_qos_param_element(struct ieee80211_qos_parameter_info
+                                            *element_param, struct ieee80211_info_element
+                                            *info_element)
+{
+        int ret = 0;
+        u16 size = sizeof(struct ieee80211_qos_parameter_info) - 2;
+
+        if ((info_element == NULL) || (element_param == NULL))
+                return -1;
+
+        if (info_element->id == QOS_ELEMENT_ID && info_element->len == size) {
+                memcpy(element_param->info_element.qui, info_element->data,
+                       info_element->len);
+                element_param->info_element.elementID = info_element->id;
+                element_param->info_element.length = info_element->len;
+        } else
+                ret = -1;
+        if (ret == 0)
+                ret = ieee80211_verify_qos_info(&element_param->info_element,
+                                                QOS_OUI_PARAM_SUB_TYPE);
+        return ret;
+}
+
+/*
+ * Parse a QoS information element
+ */
+static int ieee80211_read_qos_info_element(struct
+                                           ieee80211_qos_information_element
+                                           *element_info, struct ieee80211_info_element
+                                           *info_element)
+{
+        int ret = 0;
+        u16 size = sizeof(struct ieee80211_qos_information_element) - 2;
+
+        if (element_info == NULL)
+                return -1;
+        if (info_element == NULL)
+                return -1;
+
+        if ((info_element->id == QOS_ELEMENT_ID) && (info_element->len == size)) {
+                memcpy(element_info->qui, info_element->data,
+                       info_element->len);
+                element_info->elementID = info_element->id;
+                element_info->length = info_element->len;
+        } else
+                ret = -1;
+
+        if (ret == 0)
+                ret = ieee80211_verify_qos_info(element_info,
+                                                QOS_OUI_INFO_SUB_TYPE);
+        return ret;
+}
+
+
+/*
+ * Write QoS parameters from the ac parameters.
+ */
+static int ieee80211_qos_convert_ac_to_parameters(struct
+                                                  ieee80211_qos_parameter_info
+                                                  *param_elm, struct
+                                                  ieee80211_qos_parameters
+                                                  *qos_param)
+{
+        int rc = 0;
+        int i;
+        struct ieee80211_qos_ac_parameter *ac_params;
+	u8 aci;
+        //u8 cw_min;
+        //u8 cw_max;
+
+        for (i = 0; i < QOS_QUEUE_NUM; i++) {
+                ac_params = &(param_elm->ac_params_record[i]);
+
+		aci = (ac_params->aci_aifsn & 0x60) >> 5;
+
+		if(aci >= QOS_QUEUE_NUM)
+			continue;
+                qos_param->aifs[aci] = (ac_params->aci_aifsn) & 0x0f;
+
+		/* WMM spec P.11: The minimum value for AIFSN shall be 2 */
+                qos_param->aifs[aci] = (qos_param->aifs[aci] < 2) ? 2:qos_param->aifs[aci];
+
+                qos_param->cw_min[aci] = ac_params->ecw_min_max & 0x0F;
+
+                qos_param->cw_max[aci] = (ac_params->ecw_min_max & 0xF0) >> 4;
+
+                qos_param->flag[aci] =
+                    (ac_params->aci_aifsn & 0x10) ? 0x01 : 0x00;
+                qos_param->tx_op_limit[aci] = le16_to_cpu(ac_params->tx_op_limit);
+        }
+        return rc;
+}
+
+/*
+ * we have a generic data element which it may contain QoS information or
+ * parameters element. check the information element length to decide
+ * which type to read
+ */
+static int ieee80211_parse_qos_info_param_IE(struct ieee80211_info_element
+                                             *info_element,
+                                             struct ieee80211_network *network)
+{
+        int rc = 0;
+        struct ieee80211_qos_parameters *qos_param = NULL;
+        struct ieee80211_qos_information_element qos_info_element;
+
+        rc = ieee80211_read_qos_info_element(&qos_info_element, info_element);
+
+        if (rc == 0) {
+                network->qos_data.param_count = qos_info_element.ac_info & 0x0F;
+                network->flags |= NETWORK_HAS_QOS_INFORMATION;
+        } else {
+                struct ieee80211_qos_parameter_info param_element;
+
+                rc = ieee80211_read_qos_param_element(&param_element,
+                                                      info_element);
+                if (rc == 0) {
+                        qos_param = &(network->qos_data.parameters);
+                        ieee80211_qos_convert_ac_to_parameters(&param_element,
+                                                               qos_param);
+                        network->flags |= NETWORK_HAS_QOS_PARAMETERS;
+                        network->qos_data.param_count =
+                            param_element.info_element.ac_info & 0x0F;
+                }
+        }
+
+        if (rc == 0) {
+                IEEE80211_DEBUG_QOS("QoS is supported\n");
+                network->qos_data.supported = 1;
+        }
+        return rc;
+}
+
+#ifdef CONFIG_IEEE80211_DEBUG
+#define MFIE_STRING(x) case MFIE_TYPE_ ##x: return #x
+
+static const char *get_info_element_string(u16 id)
+{
+        switch (id) {
+                MFIE_STRING(SSID);
+                MFIE_STRING(RATES);
+                MFIE_STRING(FH_SET);
+                MFIE_STRING(DS_SET);
+                MFIE_STRING(CF_SET);
+                MFIE_STRING(TIM);
+                MFIE_STRING(IBSS_SET);
+                MFIE_STRING(COUNTRY);
+                MFIE_STRING(HOP_PARAMS);
+                MFIE_STRING(HOP_TABLE);
+                MFIE_STRING(REQUEST);
+                MFIE_STRING(CHALLENGE);
+                MFIE_STRING(POWER_CONSTRAINT);
+                MFIE_STRING(POWER_CAPABILITY);
+                MFIE_STRING(TPC_REQUEST);
+                MFIE_STRING(TPC_REPORT);
+                MFIE_STRING(SUPP_CHANNELS);
+                MFIE_STRING(CSA);
+                MFIE_STRING(MEASURE_REQUEST);
+                MFIE_STRING(MEASURE_REPORT);
+                MFIE_STRING(QUIET);
+                MFIE_STRING(IBSS_DFS);
+               // MFIE_STRING(ERP_INFO);
+                MFIE_STRING(RSN);
+                MFIE_STRING(RATES_EX);
+                MFIE_STRING(GENERIC);
+                MFIE_STRING(QOS_PARAMETER);
+        default:
+                return "UNKNOWN";
+        }
+}
+#endif
+
+#ifdef ENABLE_DOT11D
+static inline void ieee80211_extract_country_ie(
+	struct ieee80211_device *ieee,
+	struct ieee80211_info_element *info_element,
+	struct ieee80211_network *network,
+	u8 * addr2
+)
+{
+	if(IS_DOT11D_ENABLE(ieee))
+	{
+		if(info_element->len!= 0)
+		{
+			memcpy(network->CountryIeBuf, info_element->data, info_element->len);
+			network->CountryIeLen = info_element->len;
+
+			if(!IS_COUNTRY_IE_VALID(ieee))
+			{
+				Dot11d_UpdateCountryIe(ieee, addr2, info_element->len, info_element->data);
+			}
+		}
+
+		//
+		// 070305, rcnjko: I update country IE watch dog here because
+		// some AP (e.g. Cisco 1242) don't include country IE in their
+		// probe response frame.
+		//
+		if(IS_EQUAL_CIE_SRC(ieee, addr2) )
+		{
+			UPDATE_CIE_WATCHDOG(ieee);
+		}
+	}
+
+}
+#endif
+
+int ieee80211_parse_info_param(struct ieee80211_device *ieee,
+		struct ieee80211_info_element *info_element,
+		u16 length,
+		struct ieee80211_network *network,
+		struct ieee80211_rx_stats *stats)
+{
+	u8 i;
+	short offset;
+        u16	tmp_htcap_len=0;
+	u16	tmp_htinfo_len=0;
+	u16 ht_realtek_agg_len=0;
+	u8  ht_realtek_agg_buf[MAX_IE_LEN];
+//	u16 broadcom_len = 0;
+#ifdef CONFIG_IEEE80211_DEBUG
+	char rates_str[64];
+	char *p;
+#endif
+
+	while (length >= sizeof(*info_element)) {
+		if (sizeof(*info_element) + info_element->len > length) {
+			IEEE80211_DEBUG_MGMT("Info elem: parse failed: "
+					     "info_element->len + 2 > left : "
+					     "info_element->len+2=%zd left=%d, id=%d.\n",
+					     info_element->len +
+					     sizeof(*info_element),
+					     length, info_element->id);
+			/* We stop processing but don't return an error here
+			 * because some misbehaviour APs break this rule. ie.
+			 * Orinoco AP1000. */
+			break;
+		}
+
+		switch (info_element->id) {
+		case MFIE_TYPE_SSID:
+			if (ieee80211_is_empty_essid(info_element->data,
+						     info_element->len)) {
+				network->flags |= NETWORK_EMPTY_ESSID;
+				break;
+			}
+
+			network->ssid_len = min(info_element->len,
+						(u8) IW_ESSID_MAX_SIZE);
+			memcpy(network->ssid, info_element->data, network->ssid_len);
+			if (network->ssid_len < IW_ESSID_MAX_SIZE)
+				memset(network->ssid + network->ssid_len, 0,
+				       IW_ESSID_MAX_SIZE - network->ssid_len);
+
+			IEEE80211_DEBUG_MGMT("MFIE_TYPE_SSID: '%s' len=%d.\n",
+					     network->ssid, network->ssid_len);
+			break;
+
+		case MFIE_TYPE_RATES:
+#ifdef CONFIG_IEEE80211_DEBUG
+			p = rates_str;
+#endif
+			network->rates_len = min(info_element->len,
+						 MAX_RATES_LENGTH);
+			for (i = 0; i < network->rates_len; i++) {
+				network->rates[i] = info_element->data[i];
+#ifdef CONFIG_IEEE80211_DEBUG
+				p += snprintf(p, sizeof(rates_str) -
+					      (p - rates_str), "%02X ",
+					      network->rates[i]);
+#endif
+				if (ieee80211_is_ofdm_rate
+				    (info_element->data[i])) {
+					network->flags |= NETWORK_HAS_OFDM;
+					if (info_element->data[i] &
+					    IEEE80211_BASIC_RATE_MASK)
+						network->flags &=
+						    ~NETWORK_HAS_CCK;
+				}
+			}
+
+			IEEE80211_DEBUG_MGMT("MFIE_TYPE_RATES: '%s' (%d)\n",
+					     rates_str, network->rates_len);
+			break;
+
+		case MFIE_TYPE_RATES_EX:
+#ifdef CONFIG_IEEE80211_DEBUG
+			p = rates_str;
+#endif
+			network->rates_ex_len = min(info_element->len,
+						    MAX_RATES_EX_LENGTH);
+			for (i = 0; i < network->rates_ex_len; i++) {
+				network->rates_ex[i] = info_element->data[i];
+#ifdef CONFIG_IEEE80211_DEBUG
+				p += snprintf(p, sizeof(rates_str) -
+					      (p - rates_str), "%02X ",
+					      network->rates[i]);
+#endif
+				if (ieee80211_is_ofdm_rate
+				    (info_element->data[i])) {
+					network->flags |= NETWORK_HAS_OFDM;
+					if (info_element->data[i] &
+					    IEEE80211_BASIC_RATE_MASK)
+						network->flags &=
+						    ~NETWORK_HAS_CCK;
+				}
+			}
+
+			IEEE80211_DEBUG_MGMT("MFIE_TYPE_RATES_EX: '%s' (%d)\n",
+					     rates_str, network->rates_ex_len);
+			break;
+
+		case MFIE_TYPE_DS_SET:
+			IEEE80211_DEBUG_MGMT("MFIE_TYPE_DS_SET: %d\n",
+					     info_element->data[0]);
+			network->channel = info_element->data[0];
+			break;
+
+		case MFIE_TYPE_FH_SET:
+			IEEE80211_DEBUG_MGMT("MFIE_TYPE_FH_SET: ignored\n");
+			break;
+
+		case MFIE_TYPE_CF_SET:
+			IEEE80211_DEBUG_MGMT("MFIE_TYPE_CF_SET: ignored\n");
+			break;
+
+		case MFIE_TYPE_TIM:
+			if(info_element->len < 4)
+				break;
+
+			network->tim.tim_count = info_element->data[0];
+			network->tim.tim_period = info_element->data[1];
+
+                        network->dtim_period = info_element->data[1];
+                        if(ieee->state != IEEE80211_LINKED)
+                                break;
+#if 0
+                        network->last_dtim_sta_time[0] = stats->mac_time[0];
+#else
+			//we use jiffies for legacy Power save
+			network->last_dtim_sta_time[0] = jiffies;
+#endif
+                        network->last_dtim_sta_time[1] = stats->mac_time[1];
+
+                        network->dtim_data = IEEE80211_DTIM_VALID;
+
+                        if(info_element->data[0] != 0)
+                                break;
+
+                        if(info_element->data[2] & 1)
+                                network->dtim_data |= IEEE80211_DTIM_MBCAST;
+
+                        offset = (info_element->data[2] >> 1)*2;
+
+                        //printk("offset1:%x aid:%x\n",offset, ieee->assoc_id);
+
+                        if(ieee->assoc_id < 8*offset ||
+                                ieee->assoc_id > 8*(offset + info_element->len -3))
+
+                                break;
+
+                        offset = (ieee->assoc_id / 8) - offset;// + ((aid % 8)? 0 : 1) ;
+
+                        if(info_element->data[3+offset] & (1<<(ieee->assoc_id%8)))
+                                network->dtim_data |= IEEE80211_DTIM_UCAST;
+
+			//IEEE80211_DEBUG_MGMT("MFIE_TYPE_TIM: partially ignored\n");
+			break;
+
+		case MFIE_TYPE_ERP:
+			network->erp_value = info_element->data[0];
+			network->flags |= NETWORK_HAS_ERP_VALUE;
+			IEEE80211_DEBUG_MGMT("MFIE_TYPE_ERP_SET: %d\n",
+					     network->erp_value);
+			break;
+		case MFIE_TYPE_IBSS_SET:
+			network->atim_window = info_element->data[0];
+			IEEE80211_DEBUG_MGMT("MFIE_TYPE_IBSS_SET: %d\n",
+					     network->atim_window);
+			break;
+
+		case MFIE_TYPE_CHALLENGE:
+			IEEE80211_DEBUG_MGMT("MFIE_TYPE_CHALLENGE: ignored\n");
+			break;
+
+		case MFIE_TYPE_GENERIC:
+			IEEE80211_DEBUG_MGMT("MFIE_TYPE_GENERIC: %d bytes\n",
+					     info_element->len);
+			if (!ieee80211_parse_qos_info_param_IE(info_element,
+							       network))
+				break;
+
+			if (info_element->len >= 4 &&
+			    info_element->data[0] == 0x00 &&
+			    info_element->data[1] == 0x50 &&
+			    info_element->data[2] == 0xf2 &&
+			    info_element->data[3] == 0x01) {
+				network->wpa_ie_len = min(info_element->len + 2,
+							  MAX_WPA_IE_LEN);
+				memcpy(network->wpa_ie, info_element,
+				       network->wpa_ie_len);
+				break;
+			}
+
+#ifdef THOMAS_TURBO
+                        if (info_element->len == 7 &&
+                            info_element->data[0] == 0x00 &&
+                            info_element->data[1] == 0xe0 &&
+                            info_element->data[2] == 0x4c &&
+                            info_element->data[3] == 0x01 &&
+                            info_element->data[4] == 0x02) {
+                                network->Turbo_Enable = 1;
+                        }
+#endif
+
+                        //for HTcap and HTinfo parameters
+			if(tmp_htcap_len == 0){
+				if(info_element->len >= 4 &&
+				   info_element->data[0] == 0x00 &&
+				   info_element->data[1] == 0x90 &&
+				   info_element->data[2] == 0x4c &&
+				   info_element->data[3] == 0x033){
+
+						tmp_htcap_len = min(info_element->len,(u8)MAX_IE_LEN);
+				   		if(tmp_htcap_len != 0){
+				   			network->bssht.bdHTSpecVer = HT_SPEC_VER_EWC;
+							network->bssht.bdHTCapLen = tmp_htcap_len > sizeof(network->bssht.bdHTCapBuf)?\
+								sizeof(network->bssht.bdHTCapBuf):tmp_htcap_len;
+							memcpy(network->bssht.bdHTCapBuf,info_element->data,network->bssht.bdHTCapLen);
+				   		}
+				}
+				if(tmp_htcap_len != 0){
+					network->bssht.bdSupportHT = true;
+					network->bssht.bdHT1R = ((((PHT_CAPABILITY_ELE)(network->bssht.bdHTCapBuf))->MCS[1]) == 0);
+				}else{
+					network->bssht.bdSupportHT = false;
+					network->bssht.bdHT1R = false;
+				}
+			}
+
+
+			if(tmp_htinfo_len == 0){
+				if(info_element->len >= 4 &&
+					info_element->data[0] == 0x00 &&
+				   	info_element->data[1] == 0x90 &&
+				   	info_element->data[2] == 0x4c &&
+				   	info_element->data[3] == 0x034){
+
+						tmp_htinfo_len = min(info_element->len,(u8)MAX_IE_LEN);
+						if(tmp_htinfo_len != 0){
+							network->bssht.bdHTSpecVer = HT_SPEC_VER_EWC;
+							if(tmp_htinfo_len){
+								network->bssht.bdHTInfoLen = tmp_htinfo_len > sizeof(network->bssht.bdHTInfoBuf)?\
+									sizeof(network->bssht.bdHTInfoBuf):tmp_htinfo_len;
+								memcpy(network->bssht.bdHTInfoBuf,info_element->data,network->bssht.bdHTInfoLen);
+							}
+
+						}
+
+				}
+			}
+
+			if(ieee->aggregation){
+				if(network->bssht.bdSupportHT){
+					if(info_element->len >= 4 &&
+						info_element->data[0] == 0x00 &&
+						info_element->data[1] == 0xe0 &&
+						info_element->data[2] == 0x4c &&
+						info_element->data[3] == 0x02){
+
+						ht_realtek_agg_len = min(info_element->len,(u8)MAX_IE_LEN);
+						memcpy(ht_realtek_agg_buf,info_element->data,info_element->len);
+
+					}
+					if(ht_realtek_agg_len >= 5){
+						network->realtek_cap_exit = true;
+						network->bssht.bdRT2RTAggregation = true;
+
+						if((ht_realtek_agg_buf[4] == 1) && (ht_realtek_agg_buf[5] & 0x02))
+						network->bssht.bdRT2RTLongSlotTime = true;
+
+						if((ht_realtek_agg_buf[4]==1) && (ht_realtek_agg_buf[5] & RT_HT_CAP_USE_92SE))
+						{
+							network->bssht.RT2RT_HT_Mode |= RT_HT_CAP_USE_92SE;
+							//bssDesc->Vender = HT_IOT_PEER_REALTEK_92SE;
+						}
+					}
+				}
+
+			}
+
+			//if(tmp_htcap_len !=0  ||  tmp_htinfo_len != 0)
+			{
+				if((info_element->len >= 3 &&
+					 info_element->data[0] == 0x00 &&
+					 info_element->data[1] == 0x05 &&
+					 info_element->data[2] == 0xb5) ||
+					 (info_element->len >= 3 &&
+					 info_element->data[0] == 0x00 &&
+					 info_element->data[1] == 0x0a &&
+					 info_element->data[2] == 0xf7) ||
+					 (info_element->len >= 3 &&
+					 info_element->data[0] == 0x00 &&
+					 info_element->data[1] == 0x10 &&
+					 info_element->data[2] == 0x18)){
+
+						network->broadcom_cap_exist = true;
+
+				}
+			}
+#if 0
+			if (tmp_htcap_len !=0)
+				{
+					u16 cap_ext = ((PHT_CAPABILITY_ELE)&info_element->data[0])->ExtHTCapInfo;
+					if ((cap_ext & 0x0c00) == 0x0c00)
+						{
+							network->ralink_cap_exist = true;
+						}
+				}
+#endif
+			if(info_element->len >= 3 &&
+				info_element->data[0] == 0x00 &&
+				info_element->data[1] == 0x0c &&
+				info_element->data[2] == 0x43)
+			{
+				network->ralink_cap_exist = true;
+			}
+			else
+				network->ralink_cap_exist = false;
+			//added by amy for atheros AP
+			if((info_element->len >= 3 &&
+				info_element->data[0] == 0x00 &&
+				info_element->data[1] == 0x03 &&
+				info_element->data[2] == 0x7f) ||
+				(info_element->len >= 3 &&
+				info_element->data[0] == 0x00 &&
+				info_element->data[1] == 0x13 &&
+				info_element->data[2] == 0x74))
+			{
+			//	printk("========>%s(): athros AP is exist\n",__FUNCTION__);
+				network->atheros_cap_exist = true;
+			}
+			else
+				network->atheros_cap_exist = false;
+
+			if ((info_element->len >= 3 &&
+				info_element->data[0] == 0x00 &&
+				info_element->data[1] == 0x50 &&
+				info_element->data[2] == 0x43) )
+				{
+					network->marvell_cap_exist = true;
+				}
+			else
+				network->marvell_cap_exist = false;
+
+			if(info_element->len >= 3 &&
+				info_element->data[0] == 0x00 &&
+				info_element->data[1] == 0x40 &&
+				info_element->data[2] == 0x96)
+			{
+				network->cisco_cap_exist = true;
+			}
+			else
+				network->cisco_cap_exist = false;
+			//added by amy for LEAP of cisco
+			if(info_element->len > 4 &&
+				info_element->data[0] == 0x00 &&
+				info_element->data[1] == 0x40 &&
+				info_element->data[2] == 0x96 &&
+				info_element->data[3] == 0x01)
+			{
+				if(info_element->len == 6)
+				{
+					memcpy(network->CcxRmState, &info_element[4], 2);
+					if(network->CcxRmState[0] != 0)
+					{
+						network->bCcxRmEnable = true;
+					}
+					else
+						network->bCcxRmEnable = false;
+					//
+					// CCXv4 Table 59-1 MBSSID Masks.
+					//
+					network->MBssidMask = network->CcxRmState[1] & 0x07;
+					if(network->MBssidMask != 0)
+					{
+						network->bMBssidValid = true;
+						network->MBssidMask = 0xff << (network->MBssidMask);
+						cpMacAddr(network->MBssid, network->bssid);
+						network->MBssid[5] &= network->MBssidMask;
+					}
+					else
+					{
+						network->bMBssidValid = false;
+					}
+				}
+				else
+				{
+					network->bCcxRmEnable = false;
+				}
+			}
+			if(info_element->len > 4  &&
+				info_element->data[0] == 0x00 &&
+				info_element->data[1] == 0x40 &&
+				info_element->data[2] == 0x96 &&
+				info_element->data[3] == 0x03)
+			{
+				if(info_element->len == 5)
+				{
+					network->bWithCcxVerNum = true;
+					network->BssCcxVerNumber = info_element->data[4];
+				}
+				else
+				{
+					network->bWithCcxVerNum = false;
+					network->BssCcxVerNumber = 0;
+				}
+			}
+			break;
+
+		case MFIE_TYPE_RSN:
+			IEEE80211_DEBUG_MGMT("MFIE_TYPE_RSN: %d bytes\n",
+					     info_element->len);
+			network->rsn_ie_len = min(info_element->len + 2,
+						  MAX_WPA_IE_LEN);
+			memcpy(network->rsn_ie, info_element,
+			       network->rsn_ie_len);
+			break;
+
+                        //HT related element.
+		case MFIE_TYPE_HT_CAP:
+			IEEE80211_DEBUG_SCAN("MFIE_TYPE_HT_CAP: %d bytes\n",
+					     info_element->len);
+			tmp_htcap_len = min(info_element->len,(u8)MAX_IE_LEN);
+			if(tmp_htcap_len != 0){
+				network->bssht.bdHTSpecVer = HT_SPEC_VER_EWC;
+				network->bssht.bdHTCapLen = tmp_htcap_len > sizeof(network->bssht.bdHTCapBuf)?\
+					sizeof(network->bssht.bdHTCapBuf):tmp_htcap_len;
+				memcpy(network->bssht.bdHTCapBuf,info_element->data,network->bssht.bdHTCapLen);
+
+				//If peer is HT, but not WMM, call QosSetLegacyWMMParamWithHT()
+				// windows driver will update WMM parameters each beacon received once connected
+                                // Linux driver is a bit different.
+				network->bssht.bdSupportHT = true;
+				network->bssht.bdHT1R = ((((PHT_CAPABILITY_ELE)(network->bssht.bdHTCapBuf))->MCS[1]) == 0);
+			}
+			else{
+				network->bssht.bdSupportHT = false;
+				network->bssht.bdHT1R = false;
+			}
+			break;
+
+
+		case MFIE_TYPE_HT_INFO:
+			IEEE80211_DEBUG_SCAN("MFIE_TYPE_HT_INFO: %d bytes\n",
+					     info_element->len);
+			tmp_htinfo_len = min(info_element->len,(u8)MAX_IE_LEN);
+			if(tmp_htinfo_len){
+				network->bssht.bdHTSpecVer = HT_SPEC_VER_IEEE;
+				network->bssht.bdHTInfoLen = tmp_htinfo_len > sizeof(network->bssht.bdHTInfoBuf)?\
+					sizeof(network->bssht.bdHTInfoBuf):tmp_htinfo_len;
+				memcpy(network->bssht.bdHTInfoBuf,info_element->data,network->bssht.bdHTInfoLen);
+			}
+			break;
+
+		case MFIE_TYPE_AIRONET:
+			IEEE80211_DEBUG_SCAN("MFIE_TYPE_AIRONET: %d bytes\n",
+					     info_element->len);
+			if(info_element->len >IE_CISCO_FLAG_POSITION)
+			{
+				network->bWithAironetIE = true;
+
+				// CCX 1 spec v1.13, A01.1 CKIP Negotiation (page23):
+				// "A Cisco access point advertises support for CKIP in beacon and probe response packets,
+				//  by adding an Aironet element and setting one or both of the CKIP negotiation bits."
+				if(	(info_element->data[IE_CISCO_FLAG_POSITION]&SUPPORT_CKIP_MIC)	||
+					(info_element->data[IE_CISCO_FLAG_POSITION]&SUPPORT_CKIP_PK)	)
+				{
+		 			network->bCkipSupported = true;
+				}
+				else
+				{
+					network->bCkipSupported = false;
+				}
+			}
+			else
+			{
+				network->bWithAironetIE = false;
+		 		network->bCkipSupported = false;
+			}
+			break;
+		case MFIE_TYPE_QOS_PARAMETER:
+			printk(KERN_ERR
+			       "QoS Error need to parse QOS_PARAMETER IE\n");
+			break;
+
+#ifdef ENABLE_DOT11D
+		case MFIE_TYPE_COUNTRY:
+			IEEE80211_DEBUG_SCAN("MFIE_TYPE_COUNTRY: %d bytes\n",
+					     info_element->len);
+			//printk("=====>Receive <%s> Country IE\n",network->ssid);
+			ieee80211_extract_country_ie(ieee, info_element, network, network->bssid);//addr2 is same as addr3 when from an AP
+			break;
+#endif
+/* TODO */
+#if 0
+			/* 802.11h */
+		case MFIE_TYPE_POWER_CONSTRAINT:
+			network->power_constraint = info_element->data[0];
+			network->flags |= NETWORK_HAS_POWER_CONSTRAINT;
+			break;
+
+		case MFIE_TYPE_CSA:
+			network->power_constraint = info_element->data[0];
+			network->flags |= NETWORK_HAS_CSA;
+			break;
+
+		case MFIE_TYPE_QUIET:
+			network->quiet.count = info_element->data[0];
+			network->quiet.period = info_element->data[1];
+			network->quiet.duration = info_element->data[2];
+			network->quiet.offset = info_element->data[3];
+			network->flags |= NETWORK_HAS_QUIET;
+			break;
+
+		case MFIE_TYPE_IBSS_DFS:
+			if (network->ibss_dfs)
+				break;
+			network->ibss_dfs = kmemdup(info_element->data,
+						    info_element->len,
+						    GFP_ATOMIC);
+			if (!network->ibss_dfs)
+				return 1;
+			network->flags |= NETWORK_HAS_IBSS_DFS;
+			break;
+
+		case MFIE_TYPE_TPC_REPORT:
+			network->tpc_report.transmit_power =
+			    info_element->data[0];
+			network->tpc_report.link_margin = info_element->data[1];
+			network->flags |= NETWORK_HAS_TPC_REPORT;
+			break;
+#endif
+		default:
+			IEEE80211_DEBUG_MGMT
+			    ("Unsupported info element: %s (%d)\n",
+			     get_info_element_string(info_element->id),
+			     info_element->id);
+			break;
+		}
+
+		length -= sizeof(*info_element) + info_element->len;
+		info_element =
+		    (struct ieee80211_info_element *)&info_element->
+		    data[info_element->len];
+	}
+
+	if(!network->atheros_cap_exist && !network->broadcom_cap_exist &&
+		!network->cisco_cap_exist && !network->ralink_cap_exist && !network->bssht.bdRT2RTAggregation)
+	{
+		network->unknown_cap_exist = true;
+	}
+	else
+	{
+		network->unknown_cap_exist = false;
+	}
+	return 0;
+}
+
+static inline u8 ieee80211_SignalStrengthTranslate(
+	u8  CurrSS
+	)
+{
+	u8 RetSS;
+
+	// Step 1. Scale mapping.
+	if(CurrSS >= 71 && CurrSS <= 100)
+	{
+		RetSS = 90 + ((CurrSS - 70) / 3);
+	}
+	else if(CurrSS >= 41 && CurrSS <= 70)
+	{
+		RetSS = 78 + ((CurrSS - 40) / 3);
+	}
+	else if(CurrSS >= 31 && CurrSS <= 40)
+	{
+		RetSS = 66 + (CurrSS - 30);
+	}
+	else if(CurrSS >= 21 && CurrSS <= 30)
+	{
+		RetSS = 54 + (CurrSS - 20);
+	}
+	else if(CurrSS >= 5 && CurrSS <= 20)
+	{
+		RetSS = 42 + (((CurrSS - 5) * 2) / 3);
+	}
+	else if(CurrSS == 4)
+	{
+		RetSS = 36;
+	}
+	else if(CurrSS == 3)
+	{
+		RetSS = 27;
+	}
+	else if(CurrSS == 2)
+	{
+		RetSS = 18;
+	}
+	else if(CurrSS == 1)
+	{
+		RetSS = 9;
+	}
+	else
+	{
+		RetSS = CurrSS;
+	}
+	//RT_TRACE(COMP_DBG, DBG_LOUD, ("##### After Mapping:  LastSS: %d, CurrSS: %d, RetSS: %d\n", LastSS, CurrSS, RetSS));
+
+	// Step 2. Smoothing.
+
+	//RT_TRACE(COMP_DBG, DBG_LOUD, ("$$$$$ After Smoothing:  LastSS: %d, CurrSS: %d, RetSS: %d\n", LastSS, CurrSS, RetSS));
+
+	return RetSS;
+}
+
+long ieee80211_translate_todbm(u8 signal_strength_index	)// 0-100 index.
+{
+	long	signal_power; // in dBm.
+
+	// Translate to dBm (x=0.5y-95).
+	signal_power = (long)((signal_strength_index + 1) >> 1);
+	signal_power -= 95;
+
+	return signal_power;
+}
+
+static inline int ieee80211_network_init(
+	struct ieee80211_device *ieee,
+	struct ieee80211_probe_response *beacon,
+	struct ieee80211_network *network,
+	struct ieee80211_rx_stats *stats)
+{
+#ifdef CONFIG_IEEE80211_DEBUG
+	//char rates_str[64];
+	//char *p;
+#endif
+
+        network->qos_data.active = 0;
+        network->qos_data.supported = 0;
+        network->qos_data.param_count = 0;
+        network->qos_data.old_param_count = 0;
+
+	/* Pull out fixed field data */
+	memcpy(network->bssid, beacon->header.addr3, ETH_ALEN);
+	network->capability = le16_to_cpu(beacon->capability);
+	network->last_scanned = jiffies;
+	network->time_stamp[0] = le32_to_cpu(beacon->time_stamp[0]);
+	network->time_stamp[1] = le32_to_cpu(beacon->time_stamp[1]);
+	network->beacon_interval = le32_to_cpu(beacon->beacon_interval);
+	/* Where to pull this? beacon->listen_interval;*/
+	network->listen_interval = 0x0A;
+	network->rates_len = network->rates_ex_len = 0;
+	network->last_associate = 0;
+	network->ssid_len = 0;
+	network->flags = 0;
+	network->atim_window = 0;
+	network->erp_value = (network->capability & WLAN_CAPABILITY_IBSS) ?
+            0x3 : 0x0;
+	network->berp_info_valid = false;
+        network->broadcom_cap_exist = false;
+	network->ralink_cap_exist = false;
+	network->atheros_cap_exist = false;
+	network->cisco_cap_exist = false;
+	network->unknown_cap_exist = false;
+	network->realtek_cap_exit = false;
+	network->marvell_cap_exist = false;
+#ifdef THOMAS_TURBO
+	network->Turbo_Enable = 0;
+#endif
+#ifdef ENABLE_DOT11D
+	network->CountryIeLen = 0;
+	memset(network->CountryIeBuf, 0, MAX_IE_LEN);
+#endif
+//Initialize HT parameters
+	//ieee80211_ht_initialize(&network->bssht);
+	HTInitializeBssDesc(&network->bssht);
+	if (stats->freq == IEEE80211_52GHZ_BAND) {
+		/* for A band (No DS info) */
+		network->channel = stats->received_channel;
+	} else
+		network->flags |= NETWORK_HAS_CCK;
+
+ 	network->wpa_ie_len = 0;
+ 	network->rsn_ie_len = 0;
+
+        if (ieee80211_parse_info_param
+            (ieee,beacon->info_element, stats->len - sizeof(*beacon), network, stats))
+                return 1;
+
+	network->mode = 0;
+	if (stats->freq == IEEE80211_52GHZ_BAND)
+		network->mode = IEEE_A;
+	else {
+		if (network->flags & NETWORK_HAS_OFDM)
+			network->mode |= IEEE_G;
+		if (network->flags & NETWORK_HAS_CCK)
+			network->mode |= IEEE_B;
+	}
+
+	if (network->mode == 0) {
+		IEEE80211_DEBUG_SCAN("Filtered out '%s (" MAC_FMT ")' "
+				     "network.\n",
+				     escape_essid(network->ssid,
+						  network->ssid_len),
+				     MAC_ARG(network->bssid));
+		return 1;
+	}
+
+	if(network->bssht.bdSupportHT){
+		if(network->mode == IEEE_A)
+			network->mode = IEEE_N_5G;
+		else if(network->mode & (IEEE_G | IEEE_B))
+			network->mode = IEEE_N_24G;
+	}
+	if (ieee80211_is_empty_essid(network->ssid, network->ssid_len))
+		network->flags |= NETWORK_EMPTY_ESSID;
+
+#if 1
+	stats->signal = 30 + (stats->SignalStrength * 70) / 100;
+	//stats->signal = ieee80211_SignalStrengthTranslate(stats->signal);
+	stats->noise = ieee80211_translate_todbm((u8)(100-stats->signal)) -25;
+#endif
+
+	memcpy(&network->stats, stats, sizeof(network->stats));
+
+	return 0;
+}
+
+static inline int is_same_network(struct ieee80211_network *src,
+				  struct ieee80211_network *dst, struct ieee80211_device* ieee)
+{
+	/* A network is only a duplicate if the channel, BSSID, ESSID
+	 * and the capability field (in particular IBSS and BSS) all match.
+	 * We treat all <hidden> with the same BSSID and channel
+	 * as one network */
+	return //((src->ssid_len == dst->ssid_len) &&
+		(((src->ssid_len == dst->ssid_len) || (ieee->iw_mode == IW_MODE_INFRA)) &&
+		(src->channel == dst->channel) &&
+		!memcmp(src->bssid, dst->bssid, ETH_ALEN) &&
+		//!memcmp(src->ssid, dst->ssid, src->ssid_len) &&
+		(!memcmp(src->ssid, dst->ssid, src->ssid_len) || (ieee->iw_mode == IW_MODE_INFRA)) &&
+		((src->capability & WLAN_CAPABILITY_IBSS) ==
+		(dst->capability & WLAN_CAPABILITY_IBSS)) &&
+		((src->capability & WLAN_CAPABILITY_BSS) ==
+		(dst->capability & WLAN_CAPABILITY_BSS)));
+}
+
+static inline void update_network(struct ieee80211_network *dst,
+				  struct ieee80211_network *src)
+{
+	int qos_active;
+	u8 old_param;
+
+	memcpy(&dst->stats, &src->stats, sizeof(struct ieee80211_rx_stats));
+	dst->capability = src->capability;
+	memcpy(dst->rates, src->rates, src->rates_len);
+	dst->rates_len = src->rates_len;
+	memcpy(dst->rates_ex, src->rates_ex, src->rates_ex_len);
+	dst->rates_ex_len = src->rates_ex_len;
+	if(src->ssid_len > 0)
+	{
+		memset(dst->ssid, 0, dst->ssid_len);
+		dst->ssid_len = src->ssid_len;
+		memcpy(dst->ssid, src->ssid, src->ssid_len);
+	}
+	dst->mode = src->mode;
+	dst->flags = src->flags;
+	dst->time_stamp[0] = src->time_stamp[0];
+	dst->time_stamp[1] = src->time_stamp[1];
+	if (src->flags & NETWORK_HAS_ERP_VALUE)
+	{
+		dst->erp_value = src->erp_value;
+		dst->berp_info_valid = src->berp_info_valid = true;
+	}
+	dst->beacon_interval = src->beacon_interval;
+	dst->listen_interval = src->listen_interval;
+	dst->atim_window = src->atim_window;
+	dst->dtim_period = src->dtim_period;
+	dst->dtim_data = src->dtim_data;
+	dst->last_dtim_sta_time[0] = src->last_dtim_sta_time[0];
+	dst->last_dtim_sta_time[1] = src->last_dtim_sta_time[1];
+	memcpy(&dst->tim, &src->tim, sizeof(struct ieee80211_tim_parameters));
+
+        dst->bssht.bdSupportHT = src->bssht.bdSupportHT;
+	dst->bssht.bdRT2RTAggregation = src->bssht.bdRT2RTAggregation;
+	dst->bssht.bdHTCapLen= src->bssht.bdHTCapLen;
+	memcpy(dst->bssht.bdHTCapBuf,src->bssht.bdHTCapBuf,src->bssht.bdHTCapLen);
+	dst->bssht.bdHTInfoLen= src->bssht.bdHTInfoLen;
+	memcpy(dst->bssht.bdHTInfoBuf,src->bssht.bdHTInfoBuf,src->bssht.bdHTInfoLen);
+	dst->bssht.bdHTSpecVer = src->bssht.bdHTSpecVer;
+	dst->bssht.bdRT2RTLongSlotTime = src->bssht.bdRT2RTLongSlotTime;
+	dst->broadcom_cap_exist = src->broadcom_cap_exist;
+	dst->ralink_cap_exist = src->ralink_cap_exist;
+	dst->atheros_cap_exist = src->atheros_cap_exist;
+	dst->realtek_cap_exit = src->realtek_cap_exit;
+	dst->marvell_cap_exist = src->marvell_cap_exist;
+	dst->cisco_cap_exist = src->cisco_cap_exist;
+	dst->unknown_cap_exist = src->unknown_cap_exist;
+	memcpy(dst->wpa_ie, src->wpa_ie, src->wpa_ie_len);
+	dst->wpa_ie_len = src->wpa_ie_len;
+	memcpy(dst->rsn_ie, src->rsn_ie, src->rsn_ie_len);
+	dst->rsn_ie_len = src->rsn_ie_len;
+
+	dst->last_scanned = jiffies;
+	/* qos related parameters */
+	//qos_active = src->qos_data.active;
+	qos_active = dst->qos_data.active;
+	//old_param = dst->qos_data.old_param_count;
+	old_param = dst->qos_data.param_count;
+	if(dst->flags & NETWORK_HAS_QOS_MASK){
+        //not update QOS paramter in beacon, as most AP will set all these parameter to 0.//WB
+	//	printk("====>%s(), aifs:%x, %x\n", __FUNCTION__, dst->qos_data.parameters.aifs[0], src->qos_data.parameters.aifs[0]);
+	//	memcpy(&dst->qos_data, &src->qos_data,
+	//		sizeof(struct ieee80211_qos_data));
+	}
+	else {
+		dst->qos_data.supported = src->qos_data.supported;
+		dst->qos_data.param_count = src->qos_data.param_count;
+	}
+
+	if(dst->qos_data.supported == 1) {
+		dst->QoS_Enable = 1;
+		if(dst->ssid_len)
+			IEEE80211_DEBUG_QOS
+				("QoS the network %s is QoS supported\n",
+				dst->ssid);
+		else
+			IEEE80211_DEBUG_QOS
+				("QoS the network is QoS supported\n");
+	}
+	dst->qos_data.active = qos_active;
+	dst->qos_data.old_param_count = old_param;
+
+	/* dst->last_associate is not overwritten */
+#if 1
+	dst->wmm_info = src->wmm_info; //sure to exist in beacon or probe response frame.
+	if(src->wmm_param[0].ac_aci_acm_aifsn|| \
+	   src->wmm_param[1].ac_aci_acm_aifsn|| \
+	   src->wmm_param[2].ac_aci_acm_aifsn|| \
+	   src->wmm_param[1].ac_aci_acm_aifsn) {
+	  memcpy(dst->wmm_param, src->wmm_param, WME_AC_PRAM_LEN);
+	}
+	//dst->QoS_Enable = src->QoS_Enable;
+#else
+	dst->QoS_Enable = 1;//for Rtl8187 simulation
+#endif
+#ifdef THOMAS_TURBO
+	dst->Turbo_Enable = src->Turbo_Enable;
+#endif
+
+#ifdef ENABLE_DOT11D
+	dst->CountryIeLen = src->CountryIeLen;
+	memcpy(dst->CountryIeBuf, src->CountryIeBuf, src->CountryIeLen);
+#endif
+
+	//added by amy for LEAP
+	dst->bWithAironetIE = src->bWithAironetIE;
+	dst->bCkipSupported = src->bCkipSupported;
+	memcpy(dst->CcxRmState,src->CcxRmState,2);
+	dst->bCcxRmEnable = src->bCcxRmEnable;
+	dst->MBssidMask = src->MBssidMask;
+	dst->bMBssidValid = src->bMBssidValid;
+	memcpy(dst->MBssid,src->MBssid,6);
+	dst->bWithCcxVerNum = src->bWithCcxVerNum;
+	dst->BssCcxVerNumber = src->BssCcxVerNumber;
+
+}
+
+static inline int is_beacon(__le16 fc)
+{
+	return (WLAN_FC_GET_STYPE(le16_to_cpu(fc)) == IEEE80211_STYPE_BEACON);
+}
+
+static inline void ieee80211_process_probe_response(
+	struct ieee80211_device *ieee,
+	struct ieee80211_probe_response *beacon,
+	struct ieee80211_rx_stats *stats)
+{
+	struct ieee80211_network network;
+	struct ieee80211_network *target;
+	struct ieee80211_network *oldest = NULL;
+#ifdef CONFIG_IEEE80211_DEBUG
+	struct ieee80211_info_element *info_element = &beacon->info_element[0];
+#endif
+	unsigned long flags;
+	short renew;
+	//u8 wmm_info;
+
+	memset(&network, 0, sizeof(struct ieee80211_network));
+	IEEE80211_DEBUG_SCAN(
+		"'%s' (" MAC_FMT "): %c%c%c%c %c%c%c%c-%c%c%c%c %c%c%c%c\n",
+		escape_essid(info_element->data, info_element->len),
+		MAC_ARG(beacon->header.addr3),
+		(beacon->capability & (1<<0xf)) ? '1' : '0',
+		(beacon->capability & (1<<0xe)) ? '1' : '0',
+		(beacon->capability & (1<<0xd)) ? '1' : '0',
+		(beacon->capability & (1<<0xc)) ? '1' : '0',
+		(beacon->capability & (1<<0xb)) ? '1' : '0',
+		(beacon->capability & (1<<0xa)) ? '1' : '0',
+		(beacon->capability & (1<<0x9)) ? '1' : '0',
+		(beacon->capability & (1<<0x8)) ? '1' : '0',
+		(beacon->capability & (1<<0x7)) ? '1' : '0',
+		(beacon->capability & (1<<0x6)) ? '1' : '0',
+		(beacon->capability & (1<<0x5)) ? '1' : '0',
+		(beacon->capability & (1<<0x4)) ? '1' : '0',
+		(beacon->capability & (1<<0x3)) ? '1' : '0',
+		(beacon->capability & (1<<0x2)) ? '1' : '0',
+		(beacon->capability & (1<<0x1)) ? '1' : '0',
+		(beacon->capability & (1<<0x0)) ? '1' : '0');
+
+	if (ieee80211_network_init(ieee, beacon, &network, stats)) {
+		IEEE80211_DEBUG_SCAN("Dropped '%s' (" MAC_FMT ") via %s.\n",
+				     escape_essid(info_element->data,
+						  info_element->len),
+				     MAC_ARG(beacon->header.addr3),
+				     WLAN_FC_GET_STYPE(beacon->header.frame_ctl) ==
+				     IEEE80211_STYPE_PROBE_RESP ?
+				     "PROBE RESPONSE" : "BEACON");
+		return;
+	}
+
+#ifdef ENABLE_DOT11D
+	// For Asus EeePc request,
+	// (1) if wireless adapter receive get any 802.11d country code in AP beacon,
+	//	   wireless adapter should follow the country code.
+	// (2)  If there is no any country code in beacon,
+	//       then wireless adapter should do active scan from ch1~11 and
+	//       passive scan from ch12~14
+
+	if( !IsLegalChannel(ieee, network.channel) )
+		return;
+	if(ieee->bGlobalDomain)
+	{
+		if (WLAN_FC_GET_STYPE(beacon->header.frame_ctl) == IEEE80211_STYPE_PROBE_RESP)
+		{
+			// Case 1: Country code
+			if(IS_COUNTRY_IE_VALID(ieee) )
+			{
+				if( !IsLegalChannel(ieee, network.channel) )
+				{
+					printk("GetScanInfo(): For Country code, filter probe response at channel(%d).\n", network.channel);
+					return;
+				}
+			}
+			// Case 2: No any country code.
+			else
+			{
+				// Filter over channel ch12~14
+				if(network.channel > 11)
+				{
+					printk("GetScanInfo(): For Global Domain, filter probe response at channel(%d).\n", network.channel);
+					return;
+				}
+			}
+		}
+		else
+		{
+			// Case 1: Country code
+			if(IS_COUNTRY_IE_VALID(ieee) )
+			{
+				if( !IsLegalChannel(ieee, network.channel) )
+				{
+					printk("GetScanInfo(): For Country code, filter beacon at channel(%d).\n",network.channel);
+					return;
+				}
+			}
+			// Case 2: No any country code.
+			else
+			{
+				// Filter over channel ch12~14
+				if(network.channel > 14)
+				{
+					printk("GetScanInfo(): For Global Domain, filter beacon at channel(%d).\n",network.channel);
+					return;
+				}
+			}
+		}
+	}
+#endif
+
+	/* The network parsed correctly -- so now we scan our known networks
+	 * to see if we can find it in our list.
+	 *
+	 * NOTE:  This search is definitely not optimized.  Once its doing
+	 *        the "right thing" we'll optimize it for efficiency if
+	 *        necessary */
+
+	/* Search for this entry in the list and update it if it is
+	 * already there. */
+
+	spin_lock_irqsave(&ieee->lock, flags);
+
+	if(is_same_network(&ieee->current_network, &network, ieee)) {
+		update_network(&ieee->current_network, &network);
+		if((ieee->current_network.mode == IEEE_N_24G || ieee->current_network.mode == IEEE_G)
+		&& ieee->current_network.berp_info_valid){
+		if(ieee->current_network.erp_value& ERP_UseProtection)
+			ieee->current_network.buseprotection = true;
+		else
+			ieee->current_network.buseprotection = false;
+		}
+		if(is_beacon(beacon->header.frame_ctl))
+		{
+			if(ieee->state == IEEE80211_LINKED)
+				ieee->LinkDetectInfo.NumRecvBcnInPeriod++;
+		}
+		else //hidden AP
+			network.flags = (~NETWORK_EMPTY_ESSID & network.flags)|(NETWORK_EMPTY_ESSID & ieee->current_network.flags);
+	}
+
+	list_for_each_entry(target, &ieee->network_list, list) {
+		if (is_same_network(target, &network, ieee))
+			break;
+		if ((oldest == NULL) ||
+		    (target->last_scanned < oldest->last_scanned))
+			oldest = target;
+	}
+
+	/* If we didn't find a match, then get a new network slot to initialize
+	 * with this beacon's information */
+	if (&target->list == &ieee->network_list) {
+		if (list_empty(&ieee->network_free_list)) {
+			/* If there are no more slots, expire the oldest */
+			list_del(&oldest->list);
+			target = oldest;
+			IEEE80211_DEBUG_SCAN("Expired '%s' (" MAC_FMT ") from "
+					     "network list.\n",
+					     escape_essid(target->ssid,
+							  target->ssid_len),
+					     MAC_ARG(target->bssid));
+		} else {
+			/* Otherwise just pull from the free list */
+			target = list_entry(ieee->network_free_list.next,
+					    struct ieee80211_network, list);
+			list_del(ieee->network_free_list.next);
+		}
+
+
+#ifdef CONFIG_IEEE80211_DEBUG
+		IEEE80211_DEBUG_SCAN("Adding '%s' (" MAC_FMT ") via %s.\n",
+				     escape_essid(network.ssid,
+						  network.ssid_len),
+				     MAC_ARG(network.bssid),
+				     WLAN_FC_GET_STYPE(beacon->header.frame_ctl) ==
+				     IEEE80211_STYPE_PROBE_RESP ?
+				     "PROBE RESPONSE" : "BEACON");
+#endif
+		memcpy(target, &network, sizeof(*target));
+		list_add_tail(&target->list, &ieee->network_list);
+		if(ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE)
+			ieee80211_softmac_new_net(ieee,&network);
+	} else {
+		IEEE80211_DEBUG_SCAN("Updating '%s' (" MAC_FMT ") via %s.\n",
+				     escape_essid(target->ssid,
+						  target->ssid_len),
+				     MAC_ARG(target->bssid),
+				     WLAN_FC_GET_STYPE(beacon->header.frame_ctl) ==
+				     IEEE80211_STYPE_PROBE_RESP ?
+				     "PROBE RESPONSE" : "BEACON");
+
+		/* we have an entry and we are going to update it. But this entry may
+		 * be already expired. In this case we do the same as we found a new
+		 * net and call the new_net handler
+		 */
+		renew = !time_after(target->last_scanned + ieee->scan_age, jiffies);
+		//YJ,add,080819,for hidden ap
+		if(is_beacon(beacon->header.frame_ctl) == 0)
+			network.flags = (~NETWORK_EMPTY_ESSID & network.flags)|(NETWORK_EMPTY_ESSID & target->flags);
+		//if(strncmp(network.ssid, "linksys-c",9) == 0)
+		//	printk("====>2 network.ssid=%s FLAG=%d target.ssid=%s FLAG=%d\n", network.ssid, network.flags, target->ssid, target->flags);
+		if(((network.flags & NETWORK_EMPTY_ESSID) == NETWORK_EMPTY_ESSID) \
+		    && (((network.ssid_len > 0) && (strncmp(target->ssid, network.ssid, network.ssid_len)))\
+		    ||((ieee->current_network.ssid_len == network.ssid_len)&&(strncmp(ieee->current_network.ssid, network.ssid, network.ssid_len) == 0)&&(ieee->state == IEEE80211_NOLINK))))
+			renew = 1;
+		//YJ,add,080819,for hidden ap,end
+
+		update_network(target, &network);
+		if(renew && (ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE))
+			ieee80211_softmac_new_net(ieee,&network);
+	}
+
+	spin_unlock_irqrestore(&ieee->lock, flags);
+	if (is_beacon(beacon->header.frame_ctl)&&is_same_network(&ieee->current_network, &network, ieee)&&\
+		(ieee->state == IEEE80211_LINKED)) {
+		if(ieee->handle_beacon != NULL) {
+			ieee->handle_beacon(ieee->dev,beacon,&ieee->current_network);
+		}
+	}
+}
+
+void ieee80211_rx_mgt(struct ieee80211_device *ieee,
+		      struct ieee80211_hdr_4addr *header,
+		      struct ieee80211_rx_stats *stats)
+{
+	if(ieee->sta_sleep || (ieee->ps != IEEE80211_PS_DISABLED &&
+				ieee->iw_mode == IW_MODE_INFRA &&
+				ieee->state == IEEE80211_LINKED))
+	{
+		tasklet_schedule(&ieee->ps_task);
+	}
+
+	if(WLAN_FC_GET_STYPE(header->frame_ctl) != IEEE80211_STYPE_PROBE_RESP &&
+		WLAN_FC_GET_STYPE(header->frame_ctl) != IEEE80211_STYPE_BEACON)
+		ieee->last_rx_ps_time = jiffies;
+
+	switch (WLAN_FC_GET_STYPE(header->frame_ctl)) {
+
+	case IEEE80211_STYPE_BEACON:
+		IEEE80211_DEBUG_MGMT("received BEACON (%d)\n",
+				     WLAN_FC_GET_STYPE(header->frame_ctl));
+		IEEE80211_DEBUG_SCAN("Beacon\n");
+		ieee80211_process_probe_response(
+			ieee, (struct ieee80211_probe_response *)header, stats);
+		break;
+
+	case IEEE80211_STYPE_PROBE_RESP:
+		IEEE80211_DEBUG_MGMT("received PROBE RESPONSE (%d)\n",
+				     WLAN_FC_GET_STYPE(header->frame_ctl));
+		IEEE80211_DEBUG_SCAN("Probe response\n");
+		ieee80211_process_probe_response(
+			ieee, (struct ieee80211_probe_response *)header, stats);
+		break;
+
+	}
+}
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+EXPORT_SYMBOL(ieee80211_rx_mgt);
+EXPORT_SYMBOL(ieee80211_rx);
+#else
+EXPORT_SYMBOL_NOVERS(ieee80211_rx_mgt);
+EXPORT_SYMBOL_NOVERS(ieee80211_rx);
+#endif
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c
new file mode 100644
index 00000000000..6773e84c778
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c
@@ -0,0 +1,3580 @@
+/* IEEE 802.11 SoftMAC layer
+ * Copyright (c) 2005 Andrea Merello <andreamrl@tiscali.it>
+ *
+ * Mostly extracted from the rtl8180-sa2400 driver for the
+ * in-kernel generic ieee802.11 stack.
+ *
+ * Few lines might be stolen from other part of the ieee80211
+ * stack. Copyright who own it's copyright
+ *
+ * WPA code stolen from the ipw2200 driver.
+ * Copyright who own it's copyright.
+ *
+ * released under the GPL
+ */
+
+
+#include "ieee80211.h"
+
+#include <linux/random.h>
+#include <linux/delay.h>
+#include <linux/version.h>
+#include <asm/uaccess.h>
+#ifdef ENABLE_DOT11D
+#include "dot11d.h"
+#endif
+
+u8 rsn_authen_cipher_suite[16][4] = {
+	{0x00,0x0F,0xAC,0x00}, //Use group key, //Reserved
+	{0x00,0x0F,0xAC,0x01}, //WEP-40         //RSNA default
+	{0x00,0x0F,0xAC,0x02}, //TKIP           //NONE		//{used just as default}
+	{0x00,0x0F,0xAC,0x03}, //WRAP-historical
+	{0x00,0x0F,0xAC,0x04}, //CCMP
+	{0x00,0x0F,0xAC,0x05}, //WEP-104
+};
+
+short ieee80211_is_54g(struct ieee80211_network net)
+{
+	return ((net.rates_ex_len > 0) || (net.rates_len > 4));
+}
+
+short ieee80211_is_shortslot(struct ieee80211_network net)
+{
+	return (net.capability & WLAN_CAPABILITY_SHORT_SLOT);
+}
+
+/* returns the total length needed for pleacing the RATE MFIE
+ * tag and the EXTENDED RATE MFIE tag if needed.
+ * It encludes two bytes per tag for the tag itself and its len
+ */
+unsigned int ieee80211_MFIE_rate_len(struct ieee80211_device *ieee)
+{
+	unsigned int rate_len = 0;
+
+	if (ieee->modulation & IEEE80211_CCK_MODULATION)
+		rate_len = IEEE80211_CCK_RATE_LEN + 2;
+
+	if (ieee->modulation & IEEE80211_OFDM_MODULATION)
+
+		rate_len += IEEE80211_OFDM_RATE_LEN + 2;
+
+	return rate_len;
+}
+
+/* pleace the MFIE rate, tag to the memory (double) poined.
+ * Then it updates the pointer so that
+ * it points after the new MFIE tag added.
+ */
+void ieee80211_MFIE_Brate(struct ieee80211_device *ieee, u8 **tag_p)
+{
+	u8 *tag = *tag_p;
+
+	if (ieee->modulation & IEEE80211_CCK_MODULATION){
+		*tag++ = MFIE_TYPE_RATES;
+		*tag++ = 4;
+		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB;
+		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB;
+		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_5MB;
+		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_11MB;
+	}
+
+	/* We may add an option for custom rates that specific HW might support */
+	*tag_p = tag;
+}
+
+void ieee80211_MFIE_Grate(struct ieee80211_device *ieee, u8 **tag_p)
+{
+	u8 *tag = *tag_p;
+
+		if (ieee->modulation & IEEE80211_OFDM_MODULATION){
+
+		*tag++ = MFIE_TYPE_RATES_EX;
+		*tag++ = 8;
+		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_6MB;
+		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_9MB;
+		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_12MB;
+		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_18MB;
+		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_24MB;
+		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_36MB;
+		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_48MB;
+		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_54MB;
+
+	}
+
+	/* We may add an option for custom rates that specific HW might support */
+	*tag_p = tag;
+}
+
+
+void ieee80211_WMM_Info(struct ieee80211_device *ieee, u8 **tag_p) {
+	u8 *tag = *tag_p;
+
+	*tag++ = MFIE_TYPE_GENERIC; //0
+	*tag++ = 7;
+	*tag++ = 0x00;
+	*tag++ = 0x50;
+	*tag++ = 0xf2;
+	*tag++ = 0x02;//5
+	*tag++ = 0x00;
+	*tag++ = 0x01;
+#ifdef SUPPORT_USPD
+	if(ieee->current_network.wmm_info & 0x80) {
+		*tag++ = 0x0f|MAX_SP_Len;
+	} else {
+		*tag++ = MAX_SP_Len;
+	}
+#else
+	*tag++ = MAX_SP_Len;
+#endif
+	*tag_p = tag;
+}
+
+#ifdef THOMAS_TURBO
+void ieee80211_TURBO_Info(struct ieee80211_device *ieee, u8 **tag_p) {
+	u8 *tag = *tag_p;
+
+        *tag++ = MFIE_TYPE_GENERIC; //0
+        *tag++ = 7;
+        *tag++ = 0x00;
+        *tag++ = 0xe0;
+        *tag++ = 0x4c;
+        *tag++ = 0x01;//5
+        *tag++ = 0x02;
+        *tag++ = 0x11;
+	*tag++ = 0x00;
+
+	*tag_p = tag;
+	printk(KERN_ALERT "This is enable turbo mode IE process\n");
+}
+#endif
+
+void enqueue_mgmt(struct ieee80211_device *ieee, struct sk_buff *skb)
+{
+	int nh;
+	nh = (ieee->mgmt_queue_head +1) % MGMT_QUEUE_NUM;
+
+/*
+ * if the queue is full but we have newer frames then
+ * just overwrites the oldest.
+ *
+ * if (nh == ieee->mgmt_queue_tail)
+ *		return -1;
+ */
+	ieee->mgmt_queue_head = nh;
+	ieee->mgmt_queue_ring[nh] = skb;
+
+	//return 0;
+}
+
+struct sk_buff *dequeue_mgmt(struct ieee80211_device *ieee)
+{
+	struct sk_buff *ret;
+
+	if(ieee->mgmt_queue_tail == ieee->mgmt_queue_head)
+		return NULL;
+
+	ret = ieee->mgmt_queue_ring[ieee->mgmt_queue_tail];
+
+	ieee->mgmt_queue_tail =
+		(ieee->mgmt_queue_tail+1) % MGMT_QUEUE_NUM;
+
+	return ret;
+}
+
+void init_mgmt_queue(struct ieee80211_device *ieee)
+{
+	ieee->mgmt_queue_tail = ieee->mgmt_queue_head = 0;
+}
+
+u8 MgntQuery_MgntFrameTxRate(struct ieee80211_device *ieee)
+{
+	PRT_HIGH_THROUGHPUT      pHTInfo = ieee->pHTInfo;
+	u8 rate;
+
+	// 2008/01/25 MH For broadcom, MGNT frame set as OFDM 6M.
+	if(pHTInfo->IOTAction & HT_IOT_ACT_MGNT_USE_CCK_6M)
+		rate = 0x0c;
+	else
+		rate = ieee->basic_rate & 0x7f;
+
+	if(rate == 0){
+		// 2005.01.26, by rcnjko.
+		if(ieee->mode == IEEE_A||
+		   ieee->mode== IEEE_N_5G||
+		   (ieee->mode== IEEE_N_24G&&!pHTInfo->bCurSuppCCK))
+			rate = 0x0c;
+		else
+			rate = 0x02;
+	}
+
+	/*
+	// Data rate of ProbeReq is already decided. Annie, 2005-03-31
+	if( pMgntInfo->bScanInProgress || (pMgntInfo->bDualModeScanStep!=0) )
+	{
+	if(pMgntInfo->dot11CurrentWirelessMode==WIRELESS_MODE_A)
+	rate = 0x0c;
+	else
+	rate = 0x02;
+	}
+	 */
+	return rate;
+}
+
+
+void ieee80211_sta_wakeup(struct ieee80211_device *ieee, short nl);
+
+inline void softmac_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee)
+{
+	unsigned long flags;
+	short single = ieee->softmac_features & IEEE_SOFTMAC_SINGLE_QUEUE;
+	struct ieee80211_hdr_3addr  *header=
+		(struct ieee80211_hdr_3addr  *) skb->data;
+
+	cb_desc *tcb_desc = (cb_desc *)(skb->cb + 8);
+	spin_lock_irqsave(&ieee->lock, flags);
+
+	/* called with 2nd param 0, no mgmt lock required */
+	ieee80211_sta_wakeup(ieee,0);
+
+	tcb_desc->queue_index = MGNT_QUEUE;
+	tcb_desc->data_rate = MgntQuery_MgntFrameTxRate(ieee);
+        tcb_desc->RATRIndex = 7;
+        tcb_desc->bTxDisableRateFallBack = 1;
+        tcb_desc->bTxUseDriverAssingedRate = 1;
+
+	if(single){
+		if(ieee->queue_stop){
+			enqueue_mgmt(ieee,skb);
+		}else{
+			header->seq_ctl = cpu_to_le16(ieee->seq_ctrl[0]<<4);
+
+			if (ieee->seq_ctrl[0] == 0xFFF)
+				ieee->seq_ctrl[0] = 0;
+			else
+				ieee->seq_ctrl[0]++;
+
+			/* avoid watchdog triggers */
+	//		ieee->dev->trans_start = jiffies;
+			ieee->softmac_data_hard_start_xmit(skb,ieee->dev,ieee->basic_rate);
+			//dev_kfree_skb_any(skb);//edit by thomas
+		}
+
+		spin_unlock_irqrestore(&ieee->lock, flags);
+	}else{
+		spin_unlock_irqrestore(&ieee->lock, flags);
+		spin_lock_irqsave(&ieee->mgmt_tx_lock, flags);
+
+		header->seq_ctl = cpu_to_le16(ieee->seq_ctrl[0] << 4);
+
+		if (ieee->seq_ctrl[0] == 0xFFF)
+			ieee->seq_ctrl[0] = 0;
+		else
+			ieee->seq_ctrl[0]++;
+
+		/* check wether the managed packet queued greater than 5 */
+		if(!ieee->check_nic_enough_desc(ieee->dev,tcb_desc->queue_index)||\
+				(skb_queue_len(&ieee->skb_waitQ[tcb_desc->queue_index]) != 0)||\
+				(ieee->queue_stop) ) {
+			/* insert the skb packet to the management queue */
+			/* as for the completion function, it does not need
+			 * to check it any more.
+			 * */
+			printk("%s():insert to waitqueue!\n",__FUNCTION__);
+			skb_queue_tail(&ieee->skb_waitQ[tcb_desc->queue_index], skb);
+		} else {
+			//printk("TX packet!\n");
+			ieee->softmac_hard_start_xmit(skb,ieee->dev);
+			//dev_kfree_skb_any(skb);//edit by thomas
+		}
+		spin_unlock_irqrestore(&ieee->mgmt_tx_lock, flags);
+	}
+}
+
+inline void softmac_ps_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee)
+{
+
+	short single = ieee->softmac_features & IEEE_SOFTMAC_SINGLE_QUEUE;
+	struct ieee80211_hdr_3addr  *header =
+		(struct ieee80211_hdr_3addr  *) skb->data;
+        cb_desc *tcb_desc = (cb_desc *)(skb->cb + 8);
+
+	tcb_desc->queue_index = MGNT_QUEUE;
+	tcb_desc->data_rate = MgntQuery_MgntFrameTxRate(ieee);
+	tcb_desc->RATRIndex = 7;
+	tcb_desc->bTxDisableRateFallBack = 1;
+	tcb_desc->bTxUseDriverAssingedRate = 1;
+	//printk("=============>%s()\n", __FUNCTION__);
+	if(single){
+
+		header->seq_ctl = cpu_to_le16(ieee->seq_ctrl[0] << 4);
+
+		if (ieee->seq_ctrl[0] == 0xFFF)
+			ieee->seq_ctrl[0] = 0;
+		else
+			ieee->seq_ctrl[0]++;
+
+		/* avoid watchdog triggers */
+	//	ieee->dev->trans_start = jiffies;
+		ieee->softmac_data_hard_start_xmit(skb,ieee->dev,ieee->basic_rate);
+
+	}else{
+
+		header->seq_ctl = cpu_to_le16(ieee->seq_ctrl[0] << 4);
+
+		if (ieee->seq_ctrl[0] == 0xFFF)
+			ieee->seq_ctrl[0] = 0;
+		else
+			ieee->seq_ctrl[0]++;
+
+		ieee->softmac_hard_start_xmit(skb,ieee->dev);
+
+	}
+	//dev_kfree_skb_any(skb);//edit by thomas
+}
+
+inline struct sk_buff *ieee80211_probe_req(struct ieee80211_device *ieee)
+{
+	unsigned int len,rate_len;
+	u8 *tag;
+	struct sk_buff *skb;
+	struct ieee80211_probe_request *req;
+
+	len = ieee->current_network.ssid_len;
+
+	rate_len = ieee80211_MFIE_rate_len(ieee);
+
+	skb = dev_alloc_skb(sizeof(struct ieee80211_probe_request) +
+			    2 + len + rate_len + ieee->tx_headroom);
+	if (!skb)
+		return NULL;
+
+	skb_reserve(skb, ieee->tx_headroom);
+
+	req = (struct ieee80211_probe_request *) skb_put(skb,sizeof(struct ieee80211_probe_request));
+	req->header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
+	req->header.duration_id = 0; //FIXME: is this OK ?
+
+	memset(req->header.addr1, 0xff, ETH_ALEN);
+	memcpy(req->header.addr2, ieee->dev->dev_addr, ETH_ALEN);
+	memset(req->header.addr3, 0xff, ETH_ALEN);
+
+	tag = (u8 *) skb_put(skb,len+2+rate_len);
+
+	*tag++ = MFIE_TYPE_SSID;
+	*tag++ = len;
+	memcpy(tag, ieee->current_network.ssid, len);
+	tag += len;
+
+	ieee80211_MFIE_Brate(ieee,&tag);
+	ieee80211_MFIE_Grate(ieee,&tag);
+	return skb;
+}
+
+struct sk_buff *ieee80211_get_beacon_(struct ieee80211_device *ieee);
+void ieee80211_send_beacon(struct ieee80211_device *ieee)
+{
+	struct sk_buff *skb;
+	if(!ieee->ieee_up)
+		return;
+	//unsigned long flags;
+	skb = ieee80211_get_beacon_(ieee);
+
+	if (skb){
+		softmac_mgmt_xmit(skb, ieee);
+		ieee->softmac_stats.tx_beacons++;
+		//dev_kfree_skb_any(skb);//edit by thomas
+	}
+//	ieee->beacon_timer.expires = jiffies +
+//		(MSECS( ieee->current_network.beacon_interval -5));
+
+	//spin_lock_irqsave(&ieee->beacon_lock,flags);
+	if(ieee->beacon_txing && ieee->ieee_up){
+//		if(!timer_pending(&ieee->beacon_timer))
+//			add_timer(&ieee->beacon_timer);
+		mod_timer(&ieee->beacon_timer,jiffies+(MSECS(ieee->current_network.beacon_interval-5)));
+	}
+	//spin_unlock_irqrestore(&ieee->beacon_lock,flags);
+}
+
+
+void ieee80211_send_beacon_cb(unsigned long _ieee)
+{
+	struct ieee80211_device *ieee =
+		(struct ieee80211_device *) _ieee;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ieee->beacon_lock, flags);
+	ieee80211_send_beacon(ieee);
+	spin_unlock_irqrestore(&ieee->beacon_lock, flags);
+}
+
+
+void ieee80211_send_probe(struct ieee80211_device *ieee)
+{
+	struct sk_buff *skb;
+
+	skb = ieee80211_probe_req(ieee);
+	if (skb){
+		softmac_mgmt_xmit(skb, ieee);
+		ieee->softmac_stats.tx_probe_rq++;
+		//dev_kfree_skb_any(skb);//edit by thomas
+	}
+}
+
+void ieee80211_send_probe_requests(struct ieee80211_device *ieee)
+{
+	if (ieee->active_scan && (ieee->softmac_features & IEEE_SOFTMAC_PROBERQ)){
+		ieee80211_send_probe(ieee);
+		ieee80211_send_probe(ieee);
+	}
+}
+
+/* this performs syncro scan blocking the caller until all channels
+ * in the allowed channel map has been checked.
+ */
+void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee)
+{
+	short ch = 0;
+#ifdef ENABLE_DOT11D
+	u8 channel_map[MAX_CHANNEL_NUMBER+1];
+	memcpy(channel_map, GET_DOT11D_INFO(ieee)->channel_map, MAX_CHANNEL_NUMBER+1);
+#endif
+	ieee->be_scan_inprogress = true;
+	down(&ieee->scan_sem);
+
+	while(1)
+	{
+
+		do{
+			ch++;
+			if (ch > MAX_CHANNEL_NUMBER)
+				goto out; /* scan completed */
+#ifdef ENABLE_DOT11D
+		}while(!channel_map[ch]);
+#else
+		}while(!ieee->channel_map[ch]);
+#endif
+
+		/* this fuction can be called in two situations
+		 * 1- We have switched to ad-hoc mode and we are
+		 *    performing a complete syncro scan before conclude
+		 *    there are no interesting cell and to create a
+		 *    new one. In this case the link state is
+		 *    IEEE80211_NOLINK until we found an interesting cell.
+		 *    If so the ieee8021_new_net, called by the RX path
+		 *    will set the state to IEEE80211_LINKED, so we stop
+		 *    scanning
+		 * 2- We are linked and the root uses run iwlist scan.
+		 *    So we switch to IEEE80211_LINKED_SCANNING to remember
+		 *    that we are still logically linked (not interested in
+		 *    new network events, despite for updating the net list,
+		 *    but we are temporarly 'unlinked' as the driver shall
+		 *    not filter RX frames and the channel is changing.
+		 * So the only situation in witch are interested is to check
+		 * if the state become LINKED because of the #1 situation
+		 */
+
+		if (ieee->state == IEEE80211_LINKED)
+			goto out;
+		ieee->set_chan(ieee->dev, ch);
+#ifdef ENABLE_DOT11D
+		if(channel_map[ch] == 1)
+#endif
+		ieee80211_send_probe_requests(ieee);
+
+		/* this prevent excessive time wait when we
+		 * need to wait for a syncro scan to end..
+		 */
+		if(ieee->state < IEEE80211_LINKED)
+			;
+		else
+		if (ieee->sync_scan_hurryup)
+			goto out;
+
+
+		msleep_interruptible_rsl(IEEE80211_SOFTMAC_SCAN_TIME);
+
+	}
+out:
+	if(ieee->state < IEEE80211_LINKED){
+		ieee->actscanning = false;
+		up(&ieee->scan_sem);
+		ieee->be_scan_inprogress = false;
+	}
+	else{
+	ieee->sync_scan_hurryup = 0;
+#ifdef ENABLE_DOT11D
+	if(IS_DOT11D_ENABLE(ieee))
+		DOT11D_ScanComplete(ieee);
+#endif
+	up(&ieee->scan_sem);
+	ieee->be_scan_inprogress = false;
+}
+}
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+/* called both by wq with ieee->lock held */
+void ieee80211_softmac_scan(struct ieee80211_device *ieee)
+{
+#if 0
+	short watchdog = 0;
+	do{
+		ieee->current_network.channel =
+			(ieee->current_network.channel + 1) % MAX_CHANNEL_NUMBER;
+		if (watchdog++ > MAX_CHANNEL_NUMBER)
+				return; /* no good chans */
+
+	}while(!ieee->channel_map[ieee->current_network.channel]);
+#endif
+
+	schedule_task(&ieee->softmac_scan_wq);
+}
+#endif
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+void ieee80211_softmac_scan_wq(struct work_struct *work)
+{
+        struct delayed_work *dwork = container_of(work, struct delayed_work, work);
+        struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, softmac_scan_wq);
+#else
+void ieee80211_softmac_scan_wq(struct ieee80211_device *ieee)
+{
+#endif
+	u8 last_channel = ieee->current_network.channel; //recored init channel inorder not change current channel when comming out the scan unexpectedly. WB.
+#ifdef ENABLE_DOT11D
+	u8 channel_map[MAX_CHANNEL_NUMBER+1];
+	memcpy(channel_map, GET_DOT11D_INFO(ieee)->channel_map, MAX_CHANNEL_NUMBER+1);
+#endif
+	if(!ieee->ieee_up)
+		return;
+	down(&ieee->scan_sem);
+	do{
+		ieee->current_network.channel =
+			(ieee->current_network.channel + 1) % MAX_CHANNEL_NUMBER;
+		if (ieee->scan_watch_dog++ > MAX_CHANNEL_NUMBER)
+		{
+		//if current channel is not in channel map, set to default channel.
+		#ifdef ENABLE_DOT11D
+      			if (!channel_map[ieee->current_network.channel]);
+		#else
+			if (!ieee->channel_map[ieee->current_network.channel]);
+		#endif
+				ieee->current_network.channel = 6;
+				goto out; /* no good chans */
+		}
+#ifdef ENABLE_DOT11D
+        }while(!channel_map[ieee->current_network.channel]);
+#else
+	}while(!ieee->channel_map[ieee->current_network.channel]);
+#endif
+	if (ieee->scanning == 0 )
+		goto out;
+	ieee->set_chan(ieee->dev, ieee->current_network.channel);
+#ifdef ENABLE_DOT11D
+	if(channel_map[ieee->current_network.channel] == 1)
+#endif
+	ieee80211_send_probe_requests(ieee);
+
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	queue_delayed_work(ieee->wq, &ieee->softmac_scan_wq, IEEE80211_SOFTMAC_SCAN_TIME);
+#else
+	//ieee->scan_timer.expires = jiffies + MSECS(IEEE80211_SOFTMAC_SCAN_TIME);
+	if (ieee->scanning == 1)
+		mod_timer(&ieee->scan_timer,(jiffies + MSECS(IEEE80211_SOFTMAC_SCAN_TIME)));
+#endif
+
+	up(&ieee->scan_sem);
+	return;
+out:
+#ifdef ENABLE_DOT11D
+	if(IS_DOT11D_ENABLE(ieee))
+		DOT11D_ScanComplete(ieee);
+#endif
+	ieee->current_network.channel = last_channel;
+        ieee->actscanning = false;
+	ieee->scan_watch_dog = 0;
+	ieee->scanning = 0;
+	up(&ieee->scan_sem);
+}
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+void ieee80211_softmac_scan_cb(unsigned long _dev)
+{
+	unsigned long flags;
+	struct ieee80211_device *ieee = (struct ieee80211_device *)_dev;
+
+	spin_lock_irqsave(&ieee->lock, flags);
+	ieee80211_softmac_scan(ieee);
+	spin_unlock_irqrestore(&ieee->lock, flags);
+}
+#endif
+
+
+void ieee80211_beacons_start(struct ieee80211_device *ieee)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&ieee->beacon_lock,flags);
+
+	ieee->beacon_txing = 1;
+	ieee80211_send_beacon(ieee);
+
+	spin_unlock_irqrestore(&ieee->beacon_lock,flags);
+}
+
+void ieee80211_beacons_stop(struct ieee80211_device *ieee)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ieee->beacon_lock,flags);
+
+	ieee->beacon_txing = 0;
+ 	del_timer_sync(&ieee->beacon_timer);
+
+	spin_unlock_irqrestore(&ieee->beacon_lock,flags);
+
+}
+
+
+void ieee80211_stop_send_beacons(struct ieee80211_device *ieee)
+{
+	if(ieee->stop_send_beacons)
+		ieee->stop_send_beacons(ieee->dev);
+	if (ieee->softmac_features & IEEE_SOFTMAC_BEACONS)
+		ieee80211_beacons_stop(ieee);
+}
+
+
+void ieee80211_start_send_beacons(struct ieee80211_device *ieee)
+{
+	if(ieee->start_send_beacons)
+		ieee->start_send_beacons(ieee->dev);
+	if(ieee->softmac_features & IEEE_SOFTMAC_BEACONS)
+		ieee80211_beacons_start(ieee);
+}
+
+
+void ieee80211_softmac_stop_scan(struct ieee80211_device *ieee)
+{
+//	unsigned long flags;
+
+	//ieee->sync_scan_hurryup = 1;
+
+	down(&ieee->scan_sem);
+//	spin_lock_irqsave(&ieee->lock, flags);
+	ieee->scan_watch_dog = 0;
+	if (ieee->scanning == 1){
+		ieee->scanning = 0;
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+		cancel_delayed_work(&ieee->softmac_scan_wq);
+#else
+		del_timer_sync(&ieee->scan_timer);
+#endif
+	}
+
+//	spin_unlock_irqrestore(&ieee->lock, flags);
+	up(&ieee->scan_sem);
+}
+
+void ieee80211_stop_scan(struct ieee80211_device *ieee)
+{
+	if (ieee->softmac_features & IEEE_SOFTMAC_SCAN)
+		ieee80211_softmac_stop_scan(ieee);
+	else
+		ieee->stop_scan(ieee->dev);
+}
+
+/* called with ieee->lock held */
+void ieee80211_start_scan(struct ieee80211_device *ieee)
+{
+#ifdef ENABLE_DOT11D
+	if(IS_DOT11D_ENABLE(ieee) )
+	{
+		if(IS_COUNTRY_IE_VALID(ieee))
+		{
+			RESET_CIE_WATCHDOG(ieee);
+		}
+	}
+#endif
+	if (ieee->softmac_features & IEEE_SOFTMAC_SCAN){
+		if (ieee->scanning == 0){
+			ieee->scanning = 1;
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+			queue_delayed_work(ieee->wq, &ieee->softmac_scan_wq, 0);
+#else
+
+			queue_work(ieee->wq, &ieee->softmac_scan_wq);
+#endif
+#else
+			ieee80211_softmac_scan(ieee);
+#endif
+		}
+	}else
+		ieee->start_scan(ieee->dev);
+
+}
+
+/* called with wx_sem held */
+void ieee80211_start_scan_syncro(struct ieee80211_device *ieee)
+{
+#ifdef ENABLE_DOT11D
+	if(IS_DOT11D_ENABLE(ieee) )
+	{
+		if(IS_COUNTRY_IE_VALID(ieee))
+		{
+			RESET_CIE_WATCHDOG(ieee);
+		}
+	}
+#endif
+	ieee->sync_scan_hurryup = 0;
+	if (ieee->softmac_features & IEEE_SOFTMAC_SCAN)
+		ieee80211_softmac_scan_syncro(ieee);
+	else
+		ieee->scan_syncro(ieee->dev);
+
+}
+
+inline struct sk_buff *ieee80211_authentication_req(struct ieee80211_network *beacon,
+	struct ieee80211_device *ieee, int challengelen)
+{
+	struct sk_buff *skb;
+	struct ieee80211_authentication *auth;
+	int len = sizeof(struct ieee80211_authentication) + challengelen + ieee->tx_headroom;
+
+
+	skb = dev_alloc_skb(len);
+	if (!skb) return NULL;
+
+	skb_reserve(skb, ieee->tx_headroom);
+	auth = (struct ieee80211_authentication *)
+		skb_put(skb, sizeof(struct ieee80211_authentication));
+
+	auth->header.frame_ctl = IEEE80211_STYPE_AUTH;
+	if (challengelen) auth->header.frame_ctl |= IEEE80211_FCTL_WEP;
+
+	auth->header.duration_id = 0x013a; //FIXME
+
+	memcpy(auth->header.addr1, beacon->bssid, ETH_ALEN);
+	memcpy(auth->header.addr2, ieee->dev->dev_addr, ETH_ALEN);
+	memcpy(auth->header.addr3, beacon->bssid, ETH_ALEN);
+
+	//auth->algorithm = ieee->open_wep ? WLAN_AUTH_OPEN : WLAN_AUTH_SHARED_KEY;
+	if(ieee->auth_mode == 0)
+		auth->algorithm = WLAN_AUTH_OPEN;
+	else if(ieee->auth_mode == 1)
+		auth->algorithm = WLAN_AUTH_SHARED_KEY;
+	else if(ieee->auth_mode == 2)
+		auth->algorithm = WLAN_AUTH_OPEN;//0x80;
+	printk("=================>%s():auth->algorithm is %d\n",__FUNCTION__,auth->algorithm);
+	auth->transaction = cpu_to_le16(ieee->associate_seq);
+	ieee->associate_seq++;
+
+	auth->status = cpu_to_le16(WLAN_STATUS_SUCCESS);
+
+	return skb;
+
+}
+
+
+static struct sk_buff* ieee80211_probe_resp(struct ieee80211_device *ieee, u8 *dest)
+{
+	u8 *tag;
+	int beacon_size;
+	struct ieee80211_probe_response *beacon_buf;
+	struct sk_buff *skb = NULL;
+	int encrypt;
+	int atim_len,erp_len;
+	struct ieee80211_crypt_data* crypt;
+
+	char *ssid = ieee->current_network.ssid;
+	int ssid_len = ieee->current_network.ssid_len;
+	int rate_len = ieee->current_network.rates_len+2;
+	int rate_ex_len = ieee->current_network.rates_ex_len;
+	int wpa_ie_len = ieee->wpa_ie_len;
+	u8 erpinfo_content = 0;
+
+	u8* tmp_ht_cap_buf;
+	u8 tmp_ht_cap_len=0;
+	u8* tmp_ht_info_buf;
+	u8 tmp_ht_info_len=0;
+	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
+	u8* tmp_generic_ie_buf=NULL;
+	u8 tmp_generic_ie_len=0;
+
+	if(rate_ex_len > 0) rate_ex_len+=2;
+
+	if(ieee->current_network.capability & WLAN_CAPABILITY_IBSS)
+		atim_len = 4;
+	else
+		atim_len = 0;
+
+#if 1
+	if(ieee80211_is_54g(ieee->current_network))
+		erp_len = 3;
+	else
+		erp_len = 0;
+#else
+      if((ieee->current_network.mode == IEEE_G)
+	  	||( ieee->current_network.mode == IEEE_N_24G && ieee->pHTInfo->bCurSuppCCK)) {
+	  	erp_len = 3;
+		erpinfo_content = 0;
+		if(ieee->current_network.buseprotection)
+			erpinfo_content |= ERP_UseProtection;
+      	}
+	else
+		erp_len = 0;
+#endif
+
+
+	crypt = ieee->crypt[ieee->tx_keyidx];
+
+
+	encrypt = ieee->host_encrypt && crypt && crypt->ops &&
+		((0 == strcmp(crypt->ops->name, "WEP") || wpa_ie_len));
+	//HT ralated element
+#if 1
+	tmp_ht_cap_buf =(u8*) &(ieee->pHTInfo->SelfHTCap);
+	tmp_ht_cap_len = sizeof(ieee->pHTInfo->SelfHTCap);
+	tmp_ht_info_buf =(u8*) &(ieee->pHTInfo->SelfHTInfo);
+	tmp_ht_info_len = sizeof(ieee->pHTInfo->SelfHTInfo);
+	HTConstructCapabilityElement(ieee, tmp_ht_cap_buf, &tmp_ht_cap_len,encrypt);
+	HTConstructInfoElement(ieee,tmp_ht_info_buf,&tmp_ht_info_len, encrypt);
+
+
+        if(pHTInfo->bRegRT2RTAggregation)
+        {
+        	tmp_generic_ie_buf = ieee->pHTInfo->szRT2RTAggBuffer;
+		tmp_generic_ie_len = sizeof(ieee->pHTInfo->szRT2RTAggBuffer);
+		HTConstructRT2RTAggElement(ieee, tmp_generic_ie_buf, &tmp_generic_ie_len);
+        }
+//	printk("===============>tmp_ht_cap_len is %d,tmp_ht_info_len is %d, tmp_generic_ie_len is %d\n",tmp_ht_cap_len,tmp_ht_info_len,tmp_generic_ie_len);
+#endif
+	beacon_size = sizeof(struct ieee80211_probe_response)+2+
+		ssid_len
+		+3 //channel
+		+rate_len
+		+rate_ex_len
+		+atim_len
+		+erp_len
+                +wpa_ie_len
+	//	+tmp_ht_cap_len
+	//	+tmp_ht_info_len
+	//	+tmp_generic_ie_len
+//		+wmm_len+2
+		+ieee->tx_headroom;
+	skb = dev_alloc_skb(beacon_size);
+	if (!skb)
+		return NULL;
+	skb_reserve(skb, ieee->tx_headroom);
+	beacon_buf = (struct ieee80211_probe_response*) skb_put(skb, (beacon_size - ieee->tx_headroom));
+	memcpy (beacon_buf->header.addr1, dest,ETH_ALEN);
+	memcpy (beacon_buf->header.addr2, ieee->dev->dev_addr, ETH_ALEN);
+	memcpy (beacon_buf->header.addr3, ieee->current_network.bssid, ETH_ALEN);
+
+	beacon_buf->header.duration_id = 0; //FIXME
+	beacon_buf->beacon_interval =
+		cpu_to_le16(ieee->current_network.beacon_interval);
+	beacon_buf->capability =
+		cpu_to_le16(ieee->current_network.capability & WLAN_CAPABILITY_IBSS);
+	beacon_buf->capability |=
+		cpu_to_le16(ieee->current_network.capability & WLAN_CAPABILITY_SHORT_PREAMBLE); //add short preamble here
+
+	if(ieee->short_slot && (ieee->current_network.capability & WLAN_CAPABILITY_SHORT_SLOT))
+		cpu_to_le16((beacon_buf->capability |= WLAN_CAPABILITY_SHORT_SLOT));
+
+	crypt = ieee->crypt[ieee->tx_keyidx];
+#if 0
+	encrypt = ieee->host_encrypt && crypt && crypt->ops &&
+		(0 == strcmp(crypt->ops->name, "WEP"));
+#endif
+	if (encrypt)
+		beacon_buf->capability |= cpu_to_le16(WLAN_CAPABILITY_PRIVACY);
+
+
+	beacon_buf->header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_PROBE_RESP);
+	beacon_buf->info_element[0].id = MFIE_TYPE_SSID;
+	beacon_buf->info_element[0].len = ssid_len;
+
+	tag = (u8*) beacon_buf->info_element[0].data;
+
+	memcpy(tag, ssid, ssid_len);
+
+	tag += ssid_len;
+
+	*(tag++) = MFIE_TYPE_RATES;
+	*(tag++) = rate_len-2;
+	memcpy(tag,ieee->current_network.rates,rate_len-2);
+	tag+=rate_len-2;
+
+	*(tag++) = MFIE_TYPE_DS_SET;
+	*(tag++) = 1;
+	*(tag++) = ieee->current_network.channel;
+
+	if(atim_len){
+	u16 val16;
+		*(tag++) = MFIE_TYPE_IBSS_SET;
+		*(tag++) = 2;
+		//*((u16*)(tag)) = cpu_to_le16(ieee->current_network.atim_window);
+		 val16 = cpu_to_le16(ieee->current_network.atim_window);
+		memcpy((u8 *)tag, (u8 *)&val16, 2);
+		tag+=2;
+	}
+
+	if(erp_len){
+		*(tag++) = MFIE_TYPE_ERP;
+		*(tag++) = 1;
+		*(tag++) = erpinfo_content;
+	}
+#if 0
+	//Include High Throuput capability
+
+	*(tag++) = MFIE_TYPE_HT_CAP;
+	*(tag++) = tmp_ht_cap_len - 2;
+	memcpy(tag, tmp_ht_cap_buf, tmp_ht_cap_len - 2);
+	tag += tmp_ht_cap_len - 2;
+#endif
+	if(rate_ex_len){
+		*(tag++) = MFIE_TYPE_RATES_EX;
+		*(tag++) = rate_ex_len-2;
+		memcpy(tag,ieee->current_network.rates_ex,rate_ex_len-2);
+		tag+=rate_ex_len-2;
+	}
+
+#if 0
+	//Include High Throuput info
+
+	*(tag++) = MFIE_TYPE_HT_INFO;
+	*(tag++) = tmp_ht_info_len - 2;
+	memcpy(tag, tmp_ht_info_buf, tmp_ht_info_len -2);
+	tag += tmp_ht_info_len - 2;
+#endif
+	if (wpa_ie_len)
+	{
+		if (ieee->iw_mode == IW_MODE_ADHOC)
+		{//as Windows will set pairwise key same as the group key which is not allowed in Linux, so set this for IOT issue. WB 2008.07.07
+			memcpy(&ieee->wpa_ie[14], &ieee->wpa_ie[8], 4);
+		}
+		memcpy(tag, ieee->wpa_ie, ieee->wpa_ie_len);
+		tag += wpa_ie_len;
+	}
+
+#if 0
+	//
+	// Construct Realtek Proprietary Aggregation mode (Set AMPDU Factor to 2, 32k)
+	//
+	if(pHTInfo->bRegRT2RTAggregation)
+	{
+		(*tag++) = 0xdd;
+		(*tag++) = tmp_generic_ie_len - 2;
+		memcpy(tag,tmp_generic_ie_buf,tmp_generic_ie_len -2);
+		tag += tmp_generic_ie_len -2;
+
+	}
+#endif
+#if 0
+	if(ieee->qos_support)
+	{
+		(*tag++) = 0xdd;
+		(*tag++) = wmm_len;
+		memcpy(tag,QosOui,wmm_len);
+		tag += wmm_len;
+	}
+#endif
+	//skb->dev = ieee->dev;
+	return skb;
+}
+
+
+struct sk_buff* ieee80211_assoc_resp(struct ieee80211_device *ieee, u8 *dest)
+{
+	struct sk_buff *skb;
+	u8* tag;
+
+	struct ieee80211_crypt_data* crypt;
+	struct ieee80211_assoc_response_frame *assoc;
+	short encrypt;
+
+	unsigned int rate_len = ieee80211_MFIE_rate_len(ieee);
+	int len = sizeof(struct ieee80211_assoc_response_frame) + rate_len + ieee->tx_headroom;
+
+	skb = dev_alloc_skb(len);
+
+	if (!skb)
+		return NULL;
+
+	skb_reserve(skb, ieee->tx_headroom);
+
+	assoc = (struct ieee80211_assoc_response_frame *)
+		skb_put(skb,sizeof(struct ieee80211_assoc_response_frame));
+
+	assoc->header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_ASSOC_RESP);
+	memcpy(assoc->header.addr1, dest,ETH_ALEN);
+	memcpy(assoc->header.addr3, ieee->dev->dev_addr, ETH_ALEN);
+	memcpy(assoc->header.addr2, ieee->dev->dev_addr, ETH_ALEN);
+	assoc->capability = cpu_to_le16(ieee->iw_mode == IW_MODE_MASTER ?
+		WLAN_CAPABILITY_BSS : WLAN_CAPABILITY_IBSS);
+
+
+	if(ieee->short_slot)
+		assoc->capability |= cpu_to_le16(WLAN_CAPABILITY_SHORT_SLOT);
+
+	if (ieee->host_encrypt)
+		crypt = ieee->crypt[ieee->tx_keyidx];
+	else crypt = NULL;
+
+	encrypt = ( crypt && crypt->ops);
+
+	if (encrypt)
+		assoc->capability |= cpu_to_le16(WLAN_CAPABILITY_PRIVACY);
+
+	assoc->status = 0;
+	assoc->aid = cpu_to_le16(ieee->assoc_id);
+	if (ieee->assoc_id == 0x2007) ieee->assoc_id=0;
+	else ieee->assoc_id++;
+
+	tag = (u8*) skb_put(skb, rate_len);
+
+	ieee80211_MFIE_Brate(ieee, &tag);
+	ieee80211_MFIE_Grate(ieee, &tag);
+
+	return skb;
+}
+
+struct sk_buff* ieee80211_auth_resp(struct ieee80211_device *ieee,int status, u8 *dest)
+{
+	struct sk_buff *skb;
+	struct ieee80211_authentication *auth;
+	int len = ieee->tx_headroom + sizeof(struct ieee80211_authentication)+1;
+
+	skb = dev_alloc_skb(len);
+
+	if (!skb)
+		return NULL;
+
+	skb->len = sizeof(struct ieee80211_authentication);
+
+	auth = (struct ieee80211_authentication *)skb->data;
+
+	auth->status = cpu_to_le16(status);
+	auth->transaction = cpu_to_le16(2);
+	auth->algorithm = cpu_to_le16(WLAN_AUTH_OPEN);
+
+	memcpy(auth->header.addr3, ieee->dev->dev_addr, ETH_ALEN);
+	memcpy(auth->header.addr2, ieee->dev->dev_addr, ETH_ALEN);
+	memcpy(auth->header.addr1, dest, ETH_ALEN);
+	auth->header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_AUTH);
+	return skb;
+
+
+}
+
+struct sk_buff* ieee80211_null_func(struct ieee80211_device *ieee,short pwr)
+{
+	struct sk_buff *skb;
+	struct ieee80211_hdr_3addr* hdr;
+
+	skb = dev_alloc_skb(sizeof(struct ieee80211_hdr_3addr));
+
+	if (!skb)
+		return NULL;
+
+	hdr = (struct ieee80211_hdr_3addr*)skb_put(skb,sizeof(struct ieee80211_hdr_3addr));
+
+	memcpy(hdr->addr1, ieee->current_network.bssid, ETH_ALEN);
+	memcpy(hdr->addr2, ieee->dev->dev_addr, ETH_ALEN);
+	memcpy(hdr->addr3, ieee->current_network.bssid, ETH_ALEN);
+
+	hdr->frame_ctl = cpu_to_le16(IEEE80211_FTYPE_DATA |
+		IEEE80211_STYPE_NULLFUNC | IEEE80211_FCTL_TODS |
+		(pwr ? IEEE80211_FCTL_PM:0));
+
+	return skb;
+
+
+}
+
+
+void ieee80211_resp_to_assoc_rq(struct ieee80211_device *ieee, u8* dest)
+{
+	struct sk_buff *buf = ieee80211_assoc_resp(ieee, dest);
+
+	if (buf)
+		softmac_mgmt_xmit(buf, ieee);
+}
+
+
+void ieee80211_resp_to_auth(struct ieee80211_device *ieee, int s, u8* dest)
+{
+	struct sk_buff *buf = ieee80211_auth_resp(ieee, s, dest);
+
+	if (buf)
+		softmac_mgmt_xmit(buf, ieee);
+}
+
+
+void ieee80211_resp_to_probe(struct ieee80211_device *ieee, u8 *dest)
+{
+
+
+	struct sk_buff *buf = ieee80211_probe_resp(ieee, dest);
+	if (buf)
+		softmac_mgmt_xmit(buf, ieee);
+}
+
+
+inline struct sk_buff *ieee80211_association_req(struct ieee80211_network *beacon,struct ieee80211_device *ieee)
+{
+	struct sk_buff *skb;
+	//unsigned long flags;
+
+	struct ieee80211_assoc_request_frame *hdr;
+	u8 *tag;//,*rsn_ie;
+	//short info_addr = 0;
+	//int i;
+	//u16 suite_count = 0;
+	//u8 suit_select = 0;
+	//unsigned int wpa_len = beacon->wpa_ie_len;
+	//for HT
+	u8* ht_cap_buf = NULL;
+	u8 ht_cap_len=0;
+	u8* realtek_ie_buf=NULL;
+	u8 realtek_ie_len=0;
+	int wpa_ie_len= ieee->wpa_ie_len;
+	unsigned int ckip_ie_len=0;
+	unsigned int ccxrm_ie_len=0;
+	unsigned int cxvernum_ie_len=0;
+	struct ieee80211_crypt_data* crypt;
+	int encrypt;
+
+	unsigned int rate_len = ieee80211_MFIE_rate_len(ieee);
+	unsigned int wmm_info_len = beacon->qos_data.supported?9:0;
+#ifdef THOMAS_TURBO
+	unsigned int turbo_info_len = beacon->Turbo_Enable?9:0;
+#endif
+
+	int len = 0;
+
+	crypt = ieee->crypt[ieee->tx_keyidx];
+	encrypt = ieee->host_encrypt && crypt && crypt->ops && ((0 == strcmp(crypt->ops->name,"WEP") || wpa_ie_len));
+
+	//Include High Throuput capability && Realtek proprietary
+	if(ieee->pHTInfo->bCurrentHTSupport&&ieee->pHTInfo->bEnableHT)
+	{
+		ht_cap_buf = (u8*)&(ieee->pHTInfo->SelfHTCap);
+		ht_cap_len = sizeof(ieee->pHTInfo->SelfHTCap);
+		HTConstructCapabilityElement(ieee, ht_cap_buf, &ht_cap_len, encrypt);
+		if(ieee->pHTInfo->bCurrentRT2RTAggregation)
+		{
+			realtek_ie_buf = ieee->pHTInfo->szRT2RTAggBuffer;
+			realtek_ie_len = sizeof( ieee->pHTInfo->szRT2RTAggBuffer);
+			HTConstructRT2RTAggElement(ieee, realtek_ie_buf, &realtek_ie_len);
+
+		}
+	}
+	if(ieee->qos_support){
+		wmm_info_len = beacon->qos_data.supported?9:0;
+	}
+
+
+	if(beacon->bCkipSupported)
+	{
+		ckip_ie_len = 30+2;
+	}
+	if(beacon->bCcxRmEnable)
+	{
+		ccxrm_ie_len = 6+2;
+	}
+	if( beacon->BssCcxVerNumber >= 2 )
+	{
+		cxvernum_ie_len = 5+2;
+	}
+#ifdef THOMAS_TURBO
+	len = sizeof(struct ieee80211_assoc_request_frame)+ 2
+		+ beacon->ssid_len//essid tagged val
+		+ rate_len//rates tagged val
+		+ wpa_ie_len
+		+ wmm_info_len
+		+ turbo_info_len
+                + ht_cap_len
+		+ realtek_ie_len
+		+ ckip_ie_len
+		+ ccxrm_ie_len
+		+ cxvernum_ie_len
+		+ ieee->tx_headroom;
+#else
+	len = sizeof(struct ieee80211_assoc_request_frame)+ 2
+		+ beacon->ssid_len//essid tagged val
+		+ rate_len//rates tagged val
+		+ wpa_ie_len
+		+ wmm_info_len
+                + ht_cap_len
+		+ realtek_ie_len
+		+ ckip_ie_len
+		+ ccxrm_ie_len
+		+ cxvernum_ie_len
+		+ ieee->tx_headroom;
+#endif
+
+	skb = dev_alloc_skb(len);
+
+	if (!skb)
+		return NULL;
+
+	skb_reserve(skb, ieee->tx_headroom);
+
+	hdr = (struct ieee80211_assoc_request_frame *)
+		skb_put(skb, sizeof(struct ieee80211_assoc_request_frame)+2);
+
+
+	hdr->header.frame_ctl = IEEE80211_STYPE_ASSOC_REQ;
+	hdr->header.duration_id= 37; //FIXME
+	memcpy(hdr->header.addr1, beacon->bssid, ETH_ALEN);
+	memcpy(hdr->header.addr2, ieee->dev->dev_addr, ETH_ALEN);
+	memcpy(hdr->header.addr3, beacon->bssid, ETH_ALEN);
+
+	memcpy(ieee->ap_mac_addr, beacon->bssid, ETH_ALEN);//for HW security, John
+
+	hdr->capability = cpu_to_le16(WLAN_CAPABILITY_BSS);
+	if (beacon->capability & WLAN_CAPABILITY_PRIVACY )
+		hdr->capability |= cpu_to_le16(WLAN_CAPABILITY_PRIVACY);
+
+	if (beacon->capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
+		hdr->capability |= cpu_to_le16(WLAN_CAPABILITY_SHORT_PREAMBLE); //add short_preamble here
+
+	if(ieee->short_slot)
+		hdr->capability |= cpu_to_le16(WLAN_CAPABILITY_SHORT_SLOT);
+ 	if (wmm_info_len) //QOS
+	hdr->capability |= cpu_to_le16(WLAN_CAPABILITY_QOS);
+
+	hdr->listen_interval = 0xa; //FIXME
+
+	hdr->info_element[0].id = MFIE_TYPE_SSID;
+
+	hdr->info_element[0].len = beacon->ssid_len;
+	tag = skb_put(skb, beacon->ssid_len);
+	memcpy(tag, beacon->ssid, beacon->ssid_len);
+
+	tag = skb_put(skb, rate_len);
+
+	ieee80211_MFIE_Brate(ieee, &tag);
+	ieee80211_MFIE_Grate(ieee, &tag);
+	// For CCX 1 S13, CKIP. Added by Annie, 2006-08-14.
+	if( beacon->bCkipSupported )
+	{
+		static u8	AironetIeOui[] = {0x00, 0x01, 0x66}; // "4500-client"
+		u8	CcxAironetBuf[30];
+		OCTET_STRING	osCcxAironetIE;
+
+		memset(CcxAironetBuf, 0,30);
+		osCcxAironetIE.Octet = CcxAironetBuf;
+		osCcxAironetIE.Length = sizeof(CcxAironetBuf);
+		//
+		// Ref. CCX test plan v3.61, 3.2.3.1 step 13.
+		// We want to make the device type as "4500-client". 060926, by CCW.
+		//
+		memcpy(osCcxAironetIE.Octet, AironetIeOui, sizeof(AironetIeOui));
+
+		// CCX1 spec V1.13, A01.1 CKIP Negotiation (page23):
+		// "The CKIP negotiation is started with the associate request from the client to the access point,
+		//  containing an Aironet element with both the MIC and KP bits set."
+		osCcxAironetIE.Octet[IE_CISCO_FLAG_POSITION] |=  (SUPPORT_CKIP_PK|SUPPORT_CKIP_MIC) ;
+		tag = skb_put(skb, ckip_ie_len);
+		*tag++ = MFIE_TYPE_AIRONET;
+		*tag++ = osCcxAironetIE.Length;
+		memcpy(tag,osCcxAironetIE.Octet,osCcxAironetIE.Length);
+		tag += osCcxAironetIE.Length;
+	}
+
+	if(beacon->bCcxRmEnable)
+	{
+		static u8 CcxRmCapBuf[] = {0x00, 0x40, 0x96, 0x01, 0x01, 0x00};
+		OCTET_STRING osCcxRmCap;
+
+		osCcxRmCap.Octet = CcxRmCapBuf;
+		osCcxRmCap.Length = sizeof(CcxRmCapBuf);
+		tag = skb_put(skb,ccxrm_ie_len);
+		*tag++ = MFIE_TYPE_GENERIC;
+		*tag++ = osCcxRmCap.Length;
+		memcpy(tag,osCcxRmCap.Octet,osCcxRmCap.Length);
+		tag += osCcxRmCap.Length;
+	}
+
+	if( beacon->BssCcxVerNumber >= 2 )
+	{
+		u8			CcxVerNumBuf[] = {0x00, 0x40, 0x96, 0x03, 0x00};
+		OCTET_STRING	osCcxVerNum;
+		CcxVerNumBuf[4] = beacon->BssCcxVerNumber;
+		osCcxVerNum.Octet = CcxVerNumBuf;
+		osCcxVerNum.Length = sizeof(CcxVerNumBuf);
+		tag = skb_put(skb,cxvernum_ie_len);
+		*tag++ = MFIE_TYPE_GENERIC;
+		*tag++ = osCcxVerNum.Length;
+		memcpy(tag,osCcxVerNum.Octet,osCcxVerNum.Length);
+		tag += osCcxVerNum.Length;
+	}
+        //HT cap element
+	if(ieee->pHTInfo->bCurrentHTSupport&&ieee->pHTInfo->bEnableHT){
+		if(ieee->pHTInfo->ePeerHTSpecVer != HT_SPEC_VER_EWC)
+		{
+			tag = skb_put(skb, ht_cap_len);
+			*tag++ = MFIE_TYPE_HT_CAP;
+			*tag++ = ht_cap_len - 2;
+			memcpy(tag, ht_cap_buf,ht_cap_len -2);
+			tag += ht_cap_len -2;
+		}
+	}
+
+
+	//choose what wpa_supplicant gives to associate.
+	tag = skb_put(skb, wpa_ie_len);
+	if (wpa_ie_len){
+		memcpy(tag, ieee->wpa_ie, ieee->wpa_ie_len);
+	}
+
+	tag = skb_put(skb,wmm_info_len);
+	if(wmm_info_len) {
+	  ieee80211_WMM_Info(ieee, &tag);
+	}
+#ifdef THOMAS_TURBO
+	tag = skb_put(skb,turbo_info_len);
+        if(turbo_info_len) {
+                ieee80211_TURBO_Info(ieee, &tag);
+        }
+#endif
+
+	if(ieee->pHTInfo->bCurrentHTSupport&&ieee->pHTInfo->bEnableHT){
+		if(ieee->pHTInfo->ePeerHTSpecVer == HT_SPEC_VER_EWC)
+		{
+			tag = skb_put(skb, ht_cap_len);
+			*tag++ = MFIE_TYPE_GENERIC;
+			*tag++ = ht_cap_len - 2;
+			memcpy(tag, ht_cap_buf,ht_cap_len - 2);
+			tag += ht_cap_len -2;
+		}
+
+		if(ieee->pHTInfo->bCurrentRT2RTAggregation){
+			tag = skb_put(skb, realtek_ie_len);
+			*tag++ = MFIE_TYPE_GENERIC;
+			*tag++ = realtek_ie_len - 2;
+			memcpy(tag, realtek_ie_buf,realtek_ie_len -2 );
+		}
+	}
+//	printk("<=====%s(), %p, %p\n", __FUNCTION__, ieee->dev, ieee->dev->dev_addr);
+//	IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, skb->data, skb->len);
+	return skb;
+}
+
+void ieee80211_associate_abort(struct ieee80211_device *ieee)
+{
+
+	unsigned long flags;
+	spin_lock_irqsave(&ieee->lock, flags);
+
+	ieee->associate_seq++;
+
+	/* don't scan, and avoid to have the RX path possibily
+	 * try again to associate. Even do not react to AUTH or
+	 * ASSOC response. Just wait for the retry wq to be scheduled.
+	 * Here we will check if there are good nets to associate
+	 * with, so we retry or just get back to NO_LINK and scanning
+	 */
+	if (ieee->state == IEEE80211_ASSOCIATING_AUTHENTICATING){
+		IEEE80211_DEBUG_MGMT("Authentication failed\n");
+		ieee->softmac_stats.no_auth_rs++;
+	}else{
+		IEEE80211_DEBUG_MGMT("Association failed\n");
+		ieee->softmac_stats.no_ass_rs++;
+	}
+
+	ieee->state = IEEE80211_ASSOCIATING_RETRY;
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	queue_delayed_work(ieee->wq, &ieee->associate_retry_wq, \
+                           IEEE80211_SOFTMAC_ASSOC_RETRY_TIME);
+#else
+	schedule_task(&ieee->associate_retry_wq);
+#endif
+
+	spin_unlock_irqrestore(&ieee->lock, flags);
+}
+
+void ieee80211_associate_abort_cb(unsigned long dev)
+{
+	ieee80211_associate_abort((struct ieee80211_device *) dev);
+}
+
+
+void ieee80211_associate_step1(struct ieee80211_device *ieee)
+{
+	struct ieee80211_network *beacon = &ieee->current_network;
+	struct sk_buff *skb;
+
+	IEEE80211_DEBUG_MGMT("Stopping scan\n");
+
+	ieee->softmac_stats.tx_auth_rq++;
+	skb=ieee80211_authentication_req(beacon, ieee, 0);
+
+	if (!skb)
+		ieee80211_associate_abort(ieee);
+	else{
+		ieee->state = IEEE80211_ASSOCIATING_AUTHENTICATING ;
+		IEEE80211_DEBUG_MGMT("Sending authentication request\n");
+		//printk(KERN_WARNING "Sending authentication request\n");
+		softmac_mgmt_xmit(skb, ieee);
+		//BUGON when you try to add_timer twice, using mod_timer may be better, john0709
+		if(!timer_pending(&ieee->associate_timer)){
+			ieee->associate_timer.expires = jiffies + (HZ / 2);
+			add_timer(&ieee->associate_timer);
+		}
+		//dev_kfree_skb_any(skb);//edit by thomas
+	}
+}
+
+void ieee80211_auth_challenge(struct ieee80211_device *ieee, u8 *challenge, int chlen)
+{
+	u8 *c;
+	struct sk_buff *skb;
+	struct ieee80211_network *beacon = &ieee->current_network;
+//	int hlen = sizeof(struct ieee80211_authentication);
+
+	ieee->associate_seq++;
+	ieee->softmac_stats.tx_auth_rq++;
+
+	skb = ieee80211_authentication_req(beacon, ieee, chlen+2);
+	if (!skb)
+		ieee80211_associate_abort(ieee);
+	else{
+		c = skb_put(skb, chlen+2);
+		*(c++) = MFIE_TYPE_CHALLENGE;
+		*(c++) = chlen;
+		memcpy(c, challenge, chlen);
+
+		IEEE80211_DEBUG_MGMT("Sending authentication challenge response\n");
+
+		ieee80211_encrypt_fragment(ieee, skb, sizeof(struct ieee80211_hdr_3addr  ));
+
+		softmac_mgmt_xmit(skb, ieee);
+		mod_timer(&ieee->associate_timer, jiffies + (HZ/2));
+#if 0
+		ieee->associate_timer.expires = jiffies + (HZ / 2);
+		add_timer(&ieee->associate_timer);
+#endif
+		//dev_kfree_skb_any(skb);//edit by thomas
+	}
+	kfree(challenge);
+}
+
+void ieee80211_associate_step2(struct ieee80211_device *ieee)
+{
+	struct sk_buff* skb;
+	struct ieee80211_network *beacon = &ieee->current_network;
+
+	del_timer_sync(&ieee->associate_timer);
+
+	IEEE80211_DEBUG_MGMT("Sending association request\n");
+
+	ieee->softmac_stats.tx_ass_rq++;
+	skb=ieee80211_association_req(beacon, ieee);
+	if (!skb)
+		ieee80211_associate_abort(ieee);
+	else{
+		softmac_mgmt_xmit(skb, ieee);
+		mod_timer(&ieee->associate_timer, jiffies + (HZ/2));
+#if 0
+		ieee->associate_timer.expires = jiffies + (HZ / 2);
+		add_timer(&ieee->associate_timer);
+#endif
+		//dev_kfree_skb_any(skb);//edit by thomas
+	}
+}
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+void ieee80211_associate_complete_wq(struct work_struct *work)
+{
+        struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, associate_complete_wq);
+#else
+void ieee80211_associate_complete_wq(struct ieee80211_device *ieee)
+{
+#endif
+	printk(KERN_INFO "Associated successfully\n");
+	ieee->is_roaming = false;
+	if(ieee80211_is_54g(ieee->current_network) &&
+		(ieee->modulation & IEEE80211_OFDM_MODULATION)){
+
+		ieee->rate = 108;
+		printk(KERN_INFO"Using G rates:%d\n", ieee->rate);
+	}else{
+		ieee->rate = 22;
+		printk(KERN_INFO"Using B rates:%d\n", ieee->rate);
+	}
+	if (ieee->pHTInfo->bCurrentHTSupport&&ieee->pHTInfo->bEnableHT)
+	{
+		printk("Successfully associated, ht enabled\n");
+		HTOnAssocRsp(ieee);
+	}
+	else
+	{
+		printk("Successfully associated, ht not enabled(%d, %d)\n", ieee->pHTInfo->bCurrentHTSupport, ieee->pHTInfo->bEnableHT);
+		memset(ieee->dot11HTOperationalRateSet, 0, 16);
+		//HTSetConnectBwMode(ieee, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT);
+	}
+	ieee->LinkDetectInfo.SlotNum = 2 * (1 + ieee->current_network.beacon_interval/500);
+	// To prevent the immediately calling watch_dog after association.
+	if(ieee->LinkDetectInfo.NumRecvBcnInPeriod==0||ieee->LinkDetectInfo.NumRecvDataInPeriod==0 )
+	{
+		ieee->LinkDetectInfo.NumRecvBcnInPeriod = 1;
+		ieee->LinkDetectInfo.NumRecvDataInPeriod= 1;
+	}
+	ieee->link_change(ieee->dev);
+	if(ieee->is_silent_reset == 0){
+		printk("============>normal associate\n");
+	notify_wx_assoc_event(ieee);
+	}
+	else if(ieee->is_silent_reset == 1)
+	{
+		printk("==================>silent reset associate\n");
+		ieee->is_silent_reset = 0;
+	}
+
+	if (ieee->data_hard_resume)
+		ieee->data_hard_resume(ieee->dev);
+	netif_carrier_on(ieee->dev);
+}
+
+void ieee80211_associate_complete(struct ieee80211_device *ieee)
+{
+//	int i;
+//	struct net_device* dev = ieee->dev;
+	del_timer_sync(&ieee->associate_timer);
+
+#if 0
+	for(i = 0; i < 6; i++) {
+	  ieee->seq_ctrl[i] = 0;
+	}
+#endif
+	ieee->state = IEEE80211_LINKED;
+#if 0
+	if (ieee->pHTInfo->bCurrentHTSupport)
+	{
+		printk("Successfully associated, ht enabled\n");
+		queue_work(ieee->wq, &ieee->ht_onAssRsp);
+	}
+	else
+	{
+		printk("Successfully associated, ht not enabled\n");
+		memset(ieee->dot11HTOperationalRateSet, 0, 16);
+		HTSetConnectBwMode(ieee, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT);
+	}
+#endif
+	//ieee->UpdateHalRATRTableHandler(dev, ieee->dot11HTOperationalRateSet);
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	queue_work(ieee->wq, &ieee->associate_complete_wq);
+#else
+	schedule_task(&ieee->associate_complete_wq);
+#endif
+}
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+void ieee80211_associate_procedure_wq(struct work_struct *work)
+{
+        struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, associate_procedure_wq);
+#else
+void ieee80211_associate_procedure_wq(struct ieee80211_device *ieee)
+{
+#endif
+	ieee->sync_scan_hurryup = 1;
+	down(&ieee->wx_sem);
+
+	if (ieee->data_hard_stop)
+		ieee->data_hard_stop(ieee->dev);
+
+	ieee80211_stop_scan(ieee);
+	printk("===>%s(), chan:%d\n", __FUNCTION__, ieee->current_network.channel);
+	//ieee->set_chan(ieee->dev, ieee->current_network.channel);
+	HTSetConnectBwMode(ieee, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT);
+
+	ieee->associate_seq = 1;
+	ieee80211_associate_step1(ieee);
+
+	up(&ieee->wx_sem);
+}
+
+inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee80211_network *net)
+{
+	u8 tmp_ssid[IW_ESSID_MAX_SIZE+1];
+	int tmp_ssid_len = 0;
+
+	short apset,ssidset,ssidbroad,apmatch,ssidmatch;
+
+	/* we are interested in new new only if we are not associated
+	 * and we are not associating / authenticating
+	 */
+	if (ieee->state != IEEE80211_NOLINK)
+		return;
+
+	if ((ieee->iw_mode == IW_MODE_INFRA) && !(net->capability & WLAN_CAPABILITY_BSS))
+		return;
+
+	if ((ieee->iw_mode == IW_MODE_ADHOC) && !(net->capability & WLAN_CAPABILITY_IBSS))
+		return;
+
+
+	if (ieee->iw_mode == IW_MODE_INFRA || ieee->iw_mode == IW_MODE_ADHOC){
+		/* if the user specified the AP MAC, we need also the essid
+		 * This could be obtained by beacons or, if the network does not
+		 * broadcast it, it can be put manually.
+		 */
+		apset = ieee->wap_set;//(memcmp(ieee->current_network.bssid, zero,ETH_ALEN)!=0 );
+		ssidset = ieee->ssid_set;//ieee->current_network.ssid[0] != '\0';
+		ssidbroad =  !(net->ssid_len == 0 || net->ssid[0]== '\0');
+		apmatch = (memcmp(ieee->current_network.bssid, net->bssid, ETH_ALEN)==0);
+		ssidmatch = (ieee->current_network.ssid_len == net->ssid_len)&&\
+				(!strncmp(ieee->current_network.ssid, net->ssid, net->ssid_len));
+
+
+		if (	/* if the user set the AP check if match.
+		         * if the network does not broadcast essid we check the user supplyed ANY essid
+			 * if the network does broadcast and the user does not set essid it is OK
+			 * if the network does broadcast and the user did set essid chech if essid match
+			 */
+			( apset && apmatch &&
+				((ssidset && ssidbroad && ssidmatch) || (ssidbroad && !ssidset) || (!ssidbroad && ssidset)) ) ||
+			/* if the ap is not set, check that the user set the bssid
+			 * and the network does bradcast and that those two bssid matches
+			 */
+			(!apset && ssidset && ssidbroad && ssidmatch)
+			){
+				/* if the essid is hidden replace it with the
+				* essid provided by the user.
+				*/
+				if (!ssidbroad){
+					strncpy(tmp_ssid, ieee->current_network.ssid, IW_ESSID_MAX_SIZE);
+					tmp_ssid_len = ieee->current_network.ssid_len;
+				}
+				memcpy(&ieee->current_network, net, sizeof(struct ieee80211_network));
+
+				if (!ssidbroad){
+					strncpy(ieee->current_network.ssid, tmp_ssid, IW_ESSID_MAX_SIZE);
+					ieee->current_network.ssid_len = tmp_ssid_len;
+				}
+				printk(KERN_INFO"Linking with %s,channel:%d, qos:%d, myHT:%d, networkHT:%d, mode:%x\n",ieee->current_network.ssid,ieee->current_network.channel, ieee->current_network.qos_data.supported, ieee->pHTInfo->bEnableHT, ieee->current_network.bssht.bdSupportHT, ieee->current_network.mode);
+
+				//ieee->pHTInfo->IOTAction = 0;
+				HTResetIOTSetting(ieee->pHTInfo);
+				if (ieee->iw_mode == IW_MODE_INFRA){
+					/* Join the network for the first time */
+					ieee->AsocRetryCount = 0;
+					//for HT by amy 080514
+					if((ieee->current_network.qos_data.supported == 1) &&
+					  // (ieee->pHTInfo->bEnableHT && ieee->current_network.bssht.bdSupportHT))
+					   ieee->current_network.bssht.bdSupportHT)
+/*WB, 2008.09.09:bCurrentHTSupport and bEnableHT two flags are going to put together to check whether we are in HT now, so needn't to check bEnableHT flags here. That's is to say we will set to HT support whenever joined AP has the ability to support HT. And whether we are in HT or not, please check bCurrentHTSupport&&bEnableHT now please.*/
+					{
+					//	ieee->pHTInfo->bCurrentHTSupport = true;
+						HTResetSelfAndSavePeerSetting(ieee, &(ieee->current_network));
+					}
+					else
+					{
+						ieee->pHTInfo->bCurrentHTSupport = false;
+					}
+
+					ieee->state = IEEE80211_ASSOCIATING;
+					if(ieee->LedControlHandler != NULL)
+					        ieee->LedControlHandler(ieee->dev, LED_CTL_START_TO_LINK);
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+					queue_work(ieee->wq, &ieee->associate_procedure_wq);
+#else
+					schedule_task(&ieee->associate_procedure_wq);
+#endif
+				}else{
+					if(ieee80211_is_54g(ieee->current_network) &&
+						(ieee->modulation & IEEE80211_OFDM_MODULATION)){
+						ieee->rate = 108;
+						ieee->SetWirelessMode(ieee->dev, IEEE_G);
+						printk(KERN_INFO"Using G rates\n");
+					}else{
+						ieee->rate = 22;
+						ieee->SetWirelessMode(ieee->dev, IEEE_B);
+						printk(KERN_INFO"Using B rates\n");
+					}
+					memset(ieee->dot11HTOperationalRateSet, 0, 16);
+					//HTSetConnectBwMode(ieee, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT);
+					ieee->state = IEEE80211_LINKED;
+				}
+
+		}
+	}
+
+}
+
+void ieee80211_softmac_check_all_nets(struct ieee80211_device *ieee)
+{
+	unsigned long flags;
+	struct ieee80211_network *target;
+
+	spin_lock_irqsave(&ieee->lock, flags);
+
+	list_for_each_entry(target, &ieee->network_list, list) {
+
+		/* if the state become different that NOLINK means
+		 * we had found what we are searching for
+		 */
+
+		if (ieee->state != IEEE80211_NOLINK)
+			break;
+
+		if (ieee->scan_age == 0 || time_after(target->last_scanned + ieee->scan_age, jiffies))
+		ieee80211_softmac_new_net(ieee, target);
+	}
+
+	spin_unlock_irqrestore(&ieee->lock, flags);
+
+}
+
+
+static inline u16 auth_parse(struct sk_buff *skb, u8** challenge, int *chlen)
+{
+	struct ieee80211_authentication *a;
+	u8 *t;
+	if (skb->len <  (sizeof(struct ieee80211_authentication)-sizeof(struct ieee80211_info_element))){
+		IEEE80211_DEBUG_MGMT("invalid len in auth resp: %d\n",skb->len);
+		return 0xcafe;
+	}
+	*challenge = NULL;
+	a = (struct ieee80211_authentication*) skb->data;
+	if(skb->len > (sizeof(struct ieee80211_authentication) +3)){
+		t = skb->data + sizeof(struct ieee80211_authentication);
+
+		if(*(t++) == MFIE_TYPE_CHALLENGE){
+			*chlen = *(t++);
+			*challenge = (u8*)kmalloc(*chlen, GFP_ATOMIC);
+			memcpy(*challenge, t, *chlen);
+		}
+	}
+
+	return cpu_to_le16(a->status);
+
+}
+
+
+int auth_rq_parse(struct sk_buff *skb,u8* dest)
+{
+	struct ieee80211_authentication *a;
+
+	if (skb->len <  (sizeof(struct ieee80211_authentication)-sizeof(struct ieee80211_info_element))){
+		IEEE80211_DEBUG_MGMT("invalid len in auth request: %d\n",skb->len);
+		return -1;
+	}
+	a = (struct ieee80211_authentication*) skb->data;
+
+	memcpy(dest,a->header.addr2, ETH_ALEN);
+
+	if (le16_to_cpu(a->algorithm) != WLAN_AUTH_OPEN)
+		return  WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG;
+
+	return WLAN_STATUS_SUCCESS;
+}
+
+static short probe_rq_parse(struct ieee80211_device *ieee, struct sk_buff *skb, u8 *src)
+{
+	u8 *tag;
+	u8 *skbend;
+	u8 *ssid=NULL;
+	u8 ssidlen = 0;
+
+	struct ieee80211_hdr_3addr   *header =
+		(struct ieee80211_hdr_3addr   *) skb->data;
+
+	if (skb->len < sizeof (struct ieee80211_hdr_3addr  ))
+		return -1; /* corrupted */
+
+	memcpy(src,header->addr2, ETH_ALEN);
+
+	skbend = (u8*)skb->data + skb->len;
+
+	tag = skb->data + sizeof (struct ieee80211_hdr_3addr  );
+
+	while (tag+1 < skbend){
+		if (*tag == 0){
+			ssid = tag+2;
+			ssidlen = *(tag+1);
+			break;
+		}
+		tag++; /* point to the len field */
+		tag = tag + *(tag); /* point to the last data byte of the tag */
+		tag++; /* point to the next tag */
+	}
+
+	//IEEE80211DMESG("Card MAC address is "MACSTR, MAC2STR(src));
+	if (ssidlen == 0) return 1;
+
+	if (!ssid) return 1; /* ssid not found in tagged param */
+	return (!strncmp(ssid, ieee->current_network.ssid, ssidlen));
+
+}
+
+int assoc_rq_parse(struct sk_buff *skb,u8* dest)
+{
+	struct ieee80211_assoc_request_frame *a;
+
+	if (skb->len < (sizeof(struct ieee80211_assoc_request_frame) -
+		sizeof(struct ieee80211_info_element))) {
+
+		IEEE80211_DEBUG_MGMT("invalid len in auth request:%d \n", skb->len);
+		return -1;
+	}
+
+	a = (struct ieee80211_assoc_request_frame*) skb->data;
+
+	memcpy(dest,a->header.addr2,ETH_ALEN);
+
+	return 0;
+}
+
+static inline u16 assoc_parse(struct ieee80211_device *ieee, struct sk_buff *skb, int *aid)
+{
+	struct ieee80211_assoc_response_frame *response_head;
+	u16 status_code;
+
+	if (skb->len <  sizeof(struct ieee80211_assoc_response_frame)){
+		IEEE80211_DEBUG_MGMT("invalid len in auth resp: %d\n", skb->len);
+		return 0xcafe;
+	}
+
+	response_head = (struct ieee80211_assoc_response_frame*) skb->data;
+	*aid = le16_to_cpu(response_head->aid) & 0x3fff;
+
+	status_code = le16_to_cpu(response_head->status);
+	if((status_code==WLAN_STATUS_ASSOC_DENIED_RATES || \
+	   status_code==WLAN_STATUS_CAPS_UNSUPPORTED)&&
+	   ((ieee->mode == IEEE_G) &&
+	    (ieee->current_network.mode == IEEE_N_24G) &&
+            (ieee->AsocRetryCount++ < (RT_ASOC_RETRY_LIMIT-1)))) {
+                 ieee->pHTInfo->IOTAction |= HT_IOT_ACT_PURE_N_MODE;
+	}else {
+		 ieee->AsocRetryCount = 0;
+	}
+
+	return le16_to_cpu(response_head->status);
+}
+
+static inline void
+ieee80211_rx_probe_rq(struct ieee80211_device *ieee, struct sk_buff *skb)
+{
+	u8 dest[ETH_ALEN];
+
+	//IEEE80211DMESG("Rx probe");
+	ieee->softmac_stats.rx_probe_rq++;
+	//DMESG("Dest is "MACSTR, MAC2STR(dest));
+	if (probe_rq_parse(ieee, skb, dest)){
+		//IEEE80211DMESG("Was for me!");
+		ieee->softmac_stats.tx_probe_rs++;
+		ieee80211_resp_to_probe(ieee, dest);
+	}
+}
+
+static inline void
+ieee80211_rx_auth_rq(struct ieee80211_device *ieee, struct sk_buff *skb)
+{
+	u8 dest[ETH_ALEN];
+	int status;
+	//IEEE80211DMESG("Rx probe");
+	ieee->softmac_stats.rx_auth_rq++;
+
+	if ((status = auth_rq_parse(skb, dest))!= -1){
+		ieee80211_resp_to_auth(ieee, status, dest);
+	}
+	//DMESG("Dest is "MACSTR, MAC2STR(dest));
+
+}
+
+static inline void
+ieee80211_rx_assoc_rq(struct ieee80211_device *ieee, struct sk_buff *skb)
+{
+
+	u8 dest[ETH_ALEN];
+	//unsigned long flags;
+
+	ieee->softmac_stats.rx_ass_rq++;
+	if (assoc_rq_parse(skb,dest) != -1){
+		ieee80211_resp_to_assoc_rq(ieee, dest);
+	}
+
+	printk(KERN_INFO"New client associated: "MAC_FMT"\n", MAC_ARG(dest));
+	//FIXME
+	#if 0
+	spin_lock_irqsave(&ieee->lock,flags);
+	add_associate(ieee,dest);
+	spin_unlock_irqrestore(&ieee->lock,flags);
+	#endif
+}
+
+
+
+void ieee80211_sta_ps_send_null_frame(struct ieee80211_device *ieee, short pwr)
+{
+
+	struct sk_buff *buf = ieee80211_null_func(ieee, pwr);
+
+	if (buf)
+		softmac_ps_mgmt_xmit(buf, ieee);
+
+}
+
+
+short ieee80211_sta_ps_sleep(struct ieee80211_device *ieee, u32 *time_h, u32 *time_l)
+{
+	int timeout = ieee->ps_timeout;
+	u8 dtim;
+	/*if(ieee->ps == IEEE80211_PS_DISABLED ||
+		ieee->iw_mode != IW_MODE_INFRA ||
+		ieee->state != IEEE80211_LINKED)
+
+		return 0;
+	*/
+	dtim = ieee->current_network.dtim_data;
+	//printk("DTIM\n");
+	if(!(dtim & IEEE80211_DTIM_VALID))
+		return 0;
+	timeout = ieee->current_network.beacon_interval; //should we use ps_timeout value or beacon_interval
+	//printk("VALID\n");
+	ieee->current_network.dtim_data = IEEE80211_DTIM_INVALID;
+
+	if(dtim & ((IEEE80211_DTIM_UCAST | IEEE80211_DTIM_MBCAST)& ieee->ps))
+		return 2;
+
+	if(!time_after(jiffies, ieee->dev->trans_start + MSECS(timeout)))
+		return 0;
+
+	if(!time_after(jiffies, ieee->last_rx_ps_time + MSECS(timeout)))
+		return 0;
+
+	if((ieee->softmac_features & IEEE_SOFTMAC_SINGLE_QUEUE ) &&
+		(ieee->mgmt_queue_tail != ieee->mgmt_queue_head))
+		return 0;
+
+	if(time_l){
+		*time_l = ieee->current_network.last_dtim_sta_time[0]
+			+ (ieee->current_network.beacon_interval);
+		//	* ieee->current_network.dtim_period) * 1000;
+	}
+
+	if(time_h){
+		*time_h = ieee->current_network.last_dtim_sta_time[1];
+		if(time_l && *time_l < ieee->current_network.last_dtim_sta_time[0])
+			*time_h += 1;
+	}
+
+	return 1;
+
+
+}
+
+inline void ieee80211_sta_ps(struct ieee80211_device *ieee)
+{
+
+	u32 th,tl;
+	short sleep;
+
+	unsigned long flags,flags2;
+
+	spin_lock_irqsave(&ieee->lock, flags);
+
+	if((ieee->ps == IEEE80211_PS_DISABLED ||
+		ieee->iw_mode != IW_MODE_INFRA ||
+		ieee->state != IEEE80211_LINKED)){
+
+	//	#warning CHECK_LOCK_HERE
+		spin_lock_irqsave(&ieee->mgmt_tx_lock, flags2);
+
+		ieee80211_sta_wakeup(ieee, 1);
+
+		spin_unlock_irqrestore(&ieee->mgmt_tx_lock, flags2);
+	}
+
+	sleep = ieee80211_sta_ps_sleep(ieee,&th, &tl);
+	/* 2 wake, 1 sleep, 0 do nothing */
+	if(sleep == 0)
+		goto out;
+
+	if(sleep == 1){
+
+		if(ieee->sta_sleep == 1)
+			ieee->enter_sleep_state(ieee->dev,th,tl);
+
+		else if(ieee->sta_sleep == 0){
+		//	printk("send null 1\n");
+			spin_lock_irqsave(&ieee->mgmt_tx_lock, flags2);
+
+			if(ieee->ps_is_queue_empty(ieee->dev)){
+
+
+				ieee->sta_sleep = 2;
+
+				ieee->ack_tx_to_ieee = 1;
+
+				ieee80211_sta_ps_send_null_frame(ieee,1);
+
+				ieee->ps_th = th;
+				ieee->ps_tl = tl;
+			}
+			spin_unlock_irqrestore(&ieee->mgmt_tx_lock, flags2);
+
+		}
+
+
+	}else if(sleep == 2){
+//#warning CHECK_LOCK_HERE
+		spin_lock_irqsave(&ieee->mgmt_tx_lock, flags2);
+
+		ieee80211_sta_wakeup(ieee,1);
+
+		spin_unlock_irqrestore(&ieee->mgmt_tx_lock, flags2);
+	}
+
+out:
+	spin_unlock_irqrestore(&ieee->lock, flags);
+
+}
+
+void ieee80211_sta_wakeup(struct ieee80211_device *ieee, short nl)
+{
+	if(ieee->sta_sleep == 0){
+		if(nl){
+			printk("Warning: driver is probably failing to report TX ps error\n");
+			ieee->ack_tx_to_ieee = 1;
+			ieee80211_sta_ps_send_null_frame(ieee, 0);
+		}
+		return;
+
+	}
+
+	if(ieee->sta_sleep == 1)
+		ieee->sta_wake_up(ieee->dev);
+
+	ieee->sta_sleep = 0;
+
+	if(nl){
+		ieee->ack_tx_to_ieee = 1;
+		ieee80211_sta_ps_send_null_frame(ieee, 0);
+	}
+}
+
+void ieee80211_ps_tx_ack(struct ieee80211_device *ieee, short success)
+{
+	unsigned long flags,flags2;
+
+	spin_lock_irqsave(&ieee->lock, flags);
+
+	if(ieee->sta_sleep == 2){
+		/* Null frame with PS bit set */
+		if(success){
+			ieee->sta_sleep = 1;
+			ieee->enter_sleep_state(ieee->dev,ieee->ps_th,ieee->ps_tl);
+		}
+		/* if the card report not success we can't be sure the AP
+		 * has not RXed so we can't assume the AP believe us awake
+		 */
+	}
+	/* 21112005 - tx again null without PS bit if lost */
+	else {
+
+		if((ieee->sta_sleep == 0) && !success){
+			spin_lock_irqsave(&ieee->mgmt_tx_lock, flags2);
+			ieee80211_sta_ps_send_null_frame(ieee, 0);
+			spin_unlock_irqrestore(&ieee->mgmt_tx_lock, flags2);
+		}
+	}
+	spin_unlock_irqrestore(&ieee->lock, flags);
+}
+void ieee80211_process_action(struct ieee80211_device* ieee, struct sk_buff* skb)
+{
+	struct ieee80211_hdr* header = (struct ieee80211_hdr*)skb->data;
+	u8* act = ieee80211_get_payload(header);
+	u8 tmp = 0;
+//	IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_BA, skb->data, skb->len);
+	if (act == NULL)
+	{
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, "error to get payload of action frame\n");
+		return;
+	}
+	tmp = *act;
+	act ++;
+	switch (tmp)
+	{
+		case ACT_CAT_BA:
+			if (*act == ACT_ADDBAREQ)
+			ieee80211_rx_ADDBAReq(ieee, skb);
+			else if (*act == ACT_ADDBARSP)
+			ieee80211_rx_ADDBARsp(ieee, skb);
+			else if (*act == ACT_DELBA)
+			ieee80211_rx_DELBA(ieee, skb);
+			break;
+		default:
+//			if (net_ratelimit())
+//			IEEE80211_DEBUG(IEEE80211_DL_BA, "unknown action frame(%d)\n", tmp);
+			break;
+	}
+	return;
+
+}
+inline int
+ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
+			struct ieee80211_rx_stats *rx_stats, u16 type,
+			u16 stype)
+{
+	struct ieee80211_hdr_3addr *header = (struct ieee80211_hdr_3addr *) skb->data;
+	u16 errcode;
+	u8* challenge;
+	int chlen=0;
+	int aid;
+	struct ieee80211_assoc_response_frame *assoc_resp;
+//	struct ieee80211_info_element *info_element;
+	bool bSupportNmode = true, bHalfSupportNmode = false; //default support N mode, disable halfNmode
+
+	if(!ieee->proto_started)
+		return 0;
+#if 0
+	printk("%d, %d, %d, %d\n", ieee->sta_sleep, ieee->ps, ieee->iw_mode, ieee->state);
+	if(ieee->sta_sleep || (ieee->ps != IEEE80211_PS_DISABLED &&
+		ieee->iw_mode == IW_MODE_INFRA &&
+		ieee->state == IEEE80211_LINKED))
+
+		tasklet_schedule(&ieee->ps_task);
+
+	if(WLAN_FC_GET_STYPE(header->frame_ctl) != IEEE80211_STYPE_PROBE_RESP &&
+		WLAN_FC_GET_STYPE(header->frame_ctl) != IEEE80211_STYPE_BEACON)
+		ieee->last_rx_ps_time = jiffies;
+#endif
+
+	switch (WLAN_FC_GET_STYPE(header->frame_ctl)) {
+
+		case IEEE80211_STYPE_ASSOC_RESP:
+		case IEEE80211_STYPE_REASSOC_RESP:
+
+			IEEE80211_DEBUG_MGMT("received [RE]ASSOCIATION RESPONSE (%d)\n",
+					WLAN_FC_GET_STYPE(header->frame_ctl));
+			if ((ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE) &&
+				ieee->state == IEEE80211_ASSOCIATING_AUTHENTICATED &&
+				ieee->iw_mode == IW_MODE_INFRA){
+				struct ieee80211_network network_resp;
+				struct ieee80211_network *network = &network_resp;
+
+				if (0 == (errcode=assoc_parse(ieee,skb, &aid))){
+					ieee->state=IEEE80211_LINKED;
+					ieee->assoc_id = aid;
+					ieee->softmac_stats.rx_ass_ok++;
+					/* station support qos */
+					/* Let the register setting defaultly with Legacy station */
+					if(ieee->qos_support) {
+						assoc_resp = (struct ieee80211_assoc_response_frame*)skb->data;
+						memset(network, 0, sizeof(*network));
+						if (ieee80211_parse_info_param(ieee,assoc_resp->info_element,\
+									rx_stats->len - sizeof(*assoc_resp),\
+									network,rx_stats)){
+							return 1;
+						}
+						else
+						{	//filling the PeerHTCap. //maybe not neccesary as we can get its info from current_network.
+							memcpy(ieee->pHTInfo->PeerHTCapBuf, network->bssht.bdHTCapBuf, network->bssht.bdHTCapLen);
+							memcpy(ieee->pHTInfo->PeerHTInfoBuf, network->bssht.bdHTInfoBuf, network->bssht.bdHTInfoLen);
+						}
+						if (ieee->handle_assoc_response != NULL)
+							ieee->handle_assoc_response(ieee->dev, (struct ieee80211_assoc_response_frame*)header, network);
+					}
+					ieee80211_associate_complete(ieee);
+				} else {
+					/* aid could not been allocated */
+					ieee->softmac_stats.rx_ass_err++;
+					printk(
+						"Association response status code 0x%x\n",
+						errcode);
+					IEEE80211_DEBUG_MGMT(
+						"Association response status code 0x%x\n",
+						errcode);
+					if(ieee->AsocRetryCount < RT_ASOC_RETRY_LIMIT) {
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+						queue_work(ieee->wq, &ieee->associate_procedure_wq);
+#else
+						schedule_task(&ieee->associate_procedure_wq);
+#endif
+					} else {
+						ieee80211_associate_abort(ieee);
+					}
+				}
+			}
+			break;
+
+		case IEEE80211_STYPE_ASSOC_REQ:
+		case IEEE80211_STYPE_REASSOC_REQ:
+
+			if ((ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE) &&
+				ieee->iw_mode == IW_MODE_MASTER)
+
+				ieee80211_rx_assoc_rq(ieee, skb);
+			break;
+
+		case IEEE80211_STYPE_AUTH:
+
+			if (ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE){
+				if (ieee->state == IEEE80211_ASSOCIATING_AUTHENTICATING &&
+				ieee->iw_mode == IW_MODE_INFRA){
+
+						IEEE80211_DEBUG_MGMT("Received authentication response");
+
+						if (0 == (errcode=auth_parse(skb, &challenge, &chlen))){
+							if(ieee->open_wep || !challenge){
+								ieee->state = IEEE80211_ASSOCIATING_AUTHENTICATED;
+								ieee->softmac_stats.rx_auth_rs_ok++;
+								if(!(ieee->pHTInfo->IOTAction&HT_IOT_ACT_PURE_N_MODE))
+								{
+									if (!ieee->GetNmodeSupportBySecCfg(ieee->dev))
+									{
+												// WEP or TKIP encryption
+										if(IsHTHalfNmodeAPs(ieee))
+										{
+											bSupportNmode = true;
+											bHalfSupportNmode = true;
+										}
+										else
+										{
+											bSupportNmode = false;
+											bHalfSupportNmode = false;
+										}
+									printk("==========>to link with AP using SEC(%d, %d)", bSupportNmode, bHalfSupportNmode);
+									}
+								}
+								/* Dummy wirless mode setting to avoid encryption issue */
+								if(bSupportNmode) {
+									//N mode setting
+									ieee->SetWirelessMode(ieee->dev, \
+											ieee->current_network.mode);
+								}else{
+									//b/g mode setting
+									/*TODO*/
+									ieee->SetWirelessMode(ieee->dev, IEEE_G);
+								}
+
+								if (ieee->current_network.mode == IEEE_N_24G && bHalfSupportNmode == true)
+								{
+									printk("===============>entern half N mode\n");
+									ieee->bHalfWirelessN24GMode = true;
+								}
+								else
+									ieee->bHalfWirelessN24GMode = false;
+
+								ieee80211_associate_step2(ieee);
+							}else{
+								ieee80211_auth_challenge(ieee, challenge, chlen);
+							}
+						}else{
+							ieee->softmac_stats.rx_auth_rs_err++;
+							IEEE80211_DEBUG_MGMT("Authentication respose status code 0x%x",errcode);
+
+							printk("Authentication respose status code 0x%x",errcode);
+							ieee80211_associate_abort(ieee);
+						}
+
+					}else if (ieee->iw_mode == IW_MODE_MASTER){
+						ieee80211_rx_auth_rq(ieee, skb);
+					}
+				}
+			break;
+
+		case IEEE80211_STYPE_PROBE_REQ:
+
+			if ((ieee->softmac_features & IEEE_SOFTMAC_PROBERS) &&
+				((ieee->iw_mode == IW_MODE_ADHOC ||
+				ieee->iw_mode == IW_MODE_MASTER) &&
+				ieee->state == IEEE80211_LINKED)){
+				ieee80211_rx_probe_rq(ieee, skb);
+			}
+			break;
+
+		case IEEE80211_STYPE_DISASSOC:
+		case IEEE80211_STYPE_DEAUTH:
+			/* FIXME for now repeat all the association procedure
+			* both for disassociation and deauthentication
+			*/
+			if ((ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE) &&
+				ieee->state == IEEE80211_LINKED &&
+				ieee->iw_mode == IW_MODE_INFRA){
+				printk("==========>received disassoc/deauth(%x) frame, reason code:%x\n",WLAN_FC_GET_STYPE(header->frame_ctl), ((struct ieee80211_disassoc*)skb->data)->reason);
+				ieee->state = IEEE80211_ASSOCIATING;
+				ieee->softmac_stats.reassoc++;
+				ieee->is_roaming = true;
+				ieee80211_disassociate(ieee);
+			//	notify_wx_assoc_event(ieee);
+				//HTSetConnectBwMode(ieee, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT);
+				RemovePeerTS(ieee, header->addr2);
+				if(ieee->LedControlHandler != NULL)
+				        ieee->LedControlHandler(ieee->dev, LED_CTL_START_TO_LINK); //added by amy for LED 090318
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+				queue_work(ieee->wq, &ieee->associate_procedure_wq);
+#else
+				schedule_task(&ieee->associate_procedure_wq);
+#endif
+			}
+			break;
+		case IEEE80211_STYPE_MANAGE_ACT:
+			ieee80211_process_action(ieee,skb);
+			break;
+		default:
+			return -1;
+			break;
+	}
+
+	//dev_kfree_skb_any(skb);
+	return 0;
+}
+
+/* following are for a simplier TX queue management.
+ * Instead of using netif_[stop/wake]_queue the driver
+ * will uses these two function (plus a reset one), that
+ * will internally uses the kernel netif_* and takes
+ * care of the ieee802.11 fragmentation.
+ * So the driver receives a fragment per time and might
+ * call the stop function when it want without take care
+ * to have enought room to TX an entire packet.
+ * This might be useful if each fragment need it's own
+ * descriptor, thus just keep a total free memory > than
+ * the max fragmentation treshold is not enought.. If the
+ * ieee802.11 stack passed a TXB struct then you needed
+ * to keep N free descriptors where
+ * N = MAX_PACKET_SIZE / MIN_FRAG_TRESHOLD
+ * In this way you need just one and the 802.11 stack
+ * will take care of buffering fragments and pass them to
+ * to the driver later, when it wakes the queue.
+ */
+void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device *ieee)
+{
+
+	unsigned int queue_index = txb->queue_index;
+	unsigned long flags;
+	int  i;
+	cb_desc *tcb_desc = NULL;
+
+	spin_lock_irqsave(&ieee->lock,flags);
+
+	/* called with 2nd parm 0, no tx mgmt lock required */
+	ieee80211_sta_wakeup(ieee,0);
+
+	/* update the tx status */
+//	ieee->stats.tx_bytes += txb->payload_size;
+//	ieee->stats.tx_packets++;
+	tcb_desc = (cb_desc *)(txb->fragments[0]->cb + MAX_DEV_ADDR_SIZE);
+	if(tcb_desc->bMulticast) {
+		ieee->stats.multicast++;
+	}
+#if 1
+	/* if xmit available, just xmit it immediately, else just insert it to the wait queue */
+	for(i = 0; i < txb->nr_frags; i++) {
+#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
+		if ((skb_queue_len(&ieee->skb_drv_aggQ[queue_index]) != 0) ||
+#else
+		if ((skb_queue_len(&ieee->skb_waitQ[queue_index]) != 0) ||
+#endif
+		(!ieee->check_nic_enough_desc(ieee->dev,queue_index))||\
+		     (ieee->queue_stop)) {
+			/* insert the skb packet to the wait queue */
+			/* as for the completion function, it does not need
+			 * to check it any more.
+			 * */
+			//printk("error:no descriptor left@queue_index %d, %d, %d\n", queue_index, skb_queue_len(&ieee->skb_waitQ[queue_index]), ieee->check_nic_enough_desc(ieee->dev,queue_index));
+			//ieee80211_stop_queue(ieee);
+#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
+			skb_queue_tail(&ieee->skb_drv_aggQ[queue_index], txb->fragments[i]);
+#else
+			skb_queue_tail(&ieee->skb_waitQ[queue_index], txb->fragments[i]);
+#endif
+		}else{
+			ieee->softmac_data_hard_start_xmit(
+					txb->fragments[i],
+					ieee->dev,ieee->rate);
+			//ieee->stats.tx_packets++;
+			//ieee->stats.tx_bytes += txb->fragments[i]->len;
+			//ieee->dev->trans_start = jiffies;
+		}
+	}
+#endif
+	ieee80211_txb_free(txb);
+
+//exit:
+	spin_unlock_irqrestore(&ieee->lock,flags);
+
+}
+
+/* called with ieee->lock acquired */
+void ieee80211_resume_tx(struct ieee80211_device *ieee)
+{
+	int i;
+	for(i = ieee->tx_pending.frag; i < ieee->tx_pending.txb->nr_frags; i++) {
+
+		if (ieee->queue_stop){
+			ieee->tx_pending.frag = i;
+			return;
+		}else{
+
+			ieee->softmac_data_hard_start_xmit(
+				ieee->tx_pending.txb->fragments[i],
+				ieee->dev,ieee->rate);
+				//(i+1)<ieee->tx_pending.txb->nr_frags);
+			ieee->stats.tx_packets++;
+		//	ieee->dev->trans_start = jiffies;
+		}
+	}
+
+
+	ieee80211_txb_free(ieee->tx_pending.txb);
+	ieee->tx_pending.txb = NULL;
+}
+
+
+void ieee80211_reset_queue(struct ieee80211_device *ieee)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ieee->lock,flags);
+	init_mgmt_queue(ieee);
+	if (ieee->tx_pending.txb){
+		ieee80211_txb_free(ieee->tx_pending.txb);
+		ieee->tx_pending.txb = NULL;
+	}
+	ieee->queue_stop = 0;
+	spin_unlock_irqrestore(&ieee->lock,flags);
+
+}
+
+void ieee80211_wake_queue(struct ieee80211_device *ieee)
+{
+
+	unsigned long flags;
+	struct sk_buff *skb;
+	struct ieee80211_hdr_3addr  *header;
+
+	spin_lock_irqsave(&ieee->lock,flags);
+	if (! ieee->queue_stop) goto exit;
+
+	ieee->queue_stop = 0;
+
+	if(ieee->softmac_features & IEEE_SOFTMAC_SINGLE_QUEUE){
+		while (!ieee->queue_stop && (skb = dequeue_mgmt(ieee))){
+
+			header = (struct ieee80211_hdr_3addr  *) skb->data;
+
+			header->seq_ctl = cpu_to_le16(ieee->seq_ctrl[0] << 4);
+
+			if (ieee->seq_ctrl[0] == 0xFFF)
+				ieee->seq_ctrl[0] = 0;
+			else
+				ieee->seq_ctrl[0]++;
+
+			ieee->softmac_data_hard_start_xmit(skb,ieee->dev,ieee->basic_rate);
+			//dev_kfree_skb_any(skb);//edit by thomas
+		}
+	}
+	if (!ieee->queue_stop && ieee->tx_pending.txb)
+		ieee80211_resume_tx(ieee);
+
+	if (!ieee->queue_stop && netif_queue_stopped(ieee->dev)){
+		ieee->softmac_stats.swtxawake++;
+		netif_wake_queue(ieee->dev);
+	}
+
+exit :
+	spin_unlock_irqrestore(&ieee->lock,flags);
+}
+
+
+void ieee80211_stop_queue(struct ieee80211_device *ieee)
+{
+	//unsigned long flags;
+	//spin_lock_irqsave(&ieee->lock,flags);
+
+	if (! netif_queue_stopped(ieee->dev)){
+		netif_stop_queue(ieee->dev);
+		ieee->softmac_stats.swtxstop++;
+	}
+	ieee->queue_stop = 1;
+	//spin_unlock_irqrestore(&ieee->lock,flags);
+
+}
+
+
+inline void ieee80211_randomize_cell(struct ieee80211_device *ieee)
+{
+
+	get_random_bytes(ieee->current_network.bssid, ETH_ALEN);
+
+	/* an IBSS cell address must have the two less significant
+	 * bits of the first byte = 2
+	 */
+	ieee->current_network.bssid[0] &= ~0x01;
+	ieee->current_network.bssid[0] |= 0x02;
+}
+
+/* called in user context only */
+void ieee80211_start_master_bss(struct ieee80211_device *ieee)
+{
+	ieee->assoc_id = 1;
+
+	if (ieee->current_network.ssid_len == 0){
+		strncpy(ieee->current_network.ssid,
+			IEEE80211_DEFAULT_TX_ESSID,
+			IW_ESSID_MAX_SIZE);
+
+		ieee->current_network.ssid_len = strlen(IEEE80211_DEFAULT_TX_ESSID);
+		ieee->ssid_set = 1;
+	}
+
+	memcpy(ieee->current_network.bssid, ieee->dev->dev_addr, ETH_ALEN);
+
+	ieee->set_chan(ieee->dev, ieee->current_network.channel);
+	ieee->state = IEEE80211_LINKED;
+	ieee->link_change(ieee->dev);
+	notify_wx_assoc_event(ieee);
+
+	if (ieee->data_hard_resume)
+		ieee->data_hard_resume(ieee->dev);
+
+	netif_carrier_on(ieee->dev);
+}
+
+void ieee80211_start_monitor_mode(struct ieee80211_device *ieee)
+{
+	if(ieee->raw_tx){
+
+		if (ieee->data_hard_resume)
+			ieee->data_hard_resume(ieee->dev);
+
+		netif_carrier_on(ieee->dev);
+	}
+}
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+void ieee80211_start_ibss_wq(struct work_struct *work)
+{
+
+        struct delayed_work *dwork = container_of(work, struct delayed_work, work);
+        struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, start_ibss_wq);
+#else
+void ieee80211_start_ibss_wq(struct ieee80211_device *ieee)
+{
+#endif
+	/* iwconfig mode ad-hoc will schedule this and return
+	 * on the other hand this will block further iwconfig SET
+	 * operations because of the wx_sem hold.
+	 * Anyway some most set operations set a flag to speed-up
+	 * (abort) this wq (when syncro scanning) before sleeping
+	 * on the semaphore
+	 */
+	if(!ieee->proto_started){
+		printk("==========oh driver down return\n");
+		return;
+	}
+	down(&ieee->wx_sem);
+	//FIXME:set back to 20M whenever HT for ibss is not ready. Otherwise,after being connected to 40M AP, it will still stay in 40M when set to ibss mode. WB 2009.02.04
+	HTSetConnectBwMode(ieee, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT);
+
+	if (ieee->current_network.ssid_len == 0){
+		strcpy(ieee->current_network.ssid,IEEE80211_DEFAULT_TX_ESSID);
+		ieee->current_network.ssid_len = strlen(IEEE80211_DEFAULT_TX_ESSID);
+		ieee->ssid_set = 1;
+	}
+
+	/* check if we have this cell in our network list */
+	ieee80211_softmac_check_all_nets(ieee);
+
+
+#ifdef ENABLE_DOT11D //if creating an ad-hoc, set its channel to 10 temporarily--this is the requirement for ASUS, not 11D, so disable 11d.
+//	if((IS_DOT11D_ENABLE(ieee)) && (ieee->state == IEEE80211_NOLINK))
+	if (ieee->state == IEEE80211_NOLINK)
+		ieee->current_network.channel = 6;
+#endif
+	/* if not then the state is not linked. Maybe the user swithced to
+	 * ad-hoc mode just after being in monitor mode, or just after
+	 * being very few time in managed mode (so the card have had no
+	 * time to scan all the chans..) or we have just run up the iface
+	 * after setting ad-hoc mode. So we have to give another try..
+	 * Here, in ibss mode, should be safe to do this without extra care
+	 * (in bss mode we had to make sure no-one tryed to associate when
+	 * we had just checked the ieee->state and we was going to start the
+	 * scan) beacause in ibss mode the ieee80211_new_net function, when
+	 * finds a good net, just set the ieee->state to IEEE80211_LINKED,
+	 * so, at worst, we waste a bit of time to initiate an unneeded syncro
+	 * scan, that will stop at the first round because it sees the state
+	 * associated.
+	 */
+	if (ieee->state == IEEE80211_NOLINK)
+		ieee80211_start_scan_syncro(ieee);
+
+	/* the network definitively is not here.. create a new cell */
+	if (ieee->state == IEEE80211_NOLINK){
+		printk("creating new IBSS cell\n");
+		if(!ieee->wap_set)
+			ieee80211_randomize_cell(ieee);
+
+		if(ieee->modulation & IEEE80211_CCK_MODULATION){
+
+			ieee->current_network.rates_len = 4;
+
+			ieee->current_network.rates[0] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB;
+			ieee->current_network.rates[1] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB;
+			ieee->current_network.rates[2] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_5MB;
+			ieee->current_network.rates[3] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_11MB;
+
+		}else
+			ieee->current_network.rates_len = 0;
+
+		if(ieee->modulation & IEEE80211_OFDM_MODULATION){
+			ieee->current_network.rates_ex_len = 8;
+
+			ieee->current_network.rates_ex[0] = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_6MB;
+			ieee->current_network.rates_ex[1] = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_9MB;
+			ieee->current_network.rates_ex[2] = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_12MB;
+			ieee->current_network.rates_ex[3] = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_18MB;
+			ieee->current_network.rates_ex[4] = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_24MB;
+			ieee->current_network.rates_ex[5] = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_36MB;
+			ieee->current_network.rates_ex[6] = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_48MB;
+			ieee->current_network.rates_ex[7] = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_54MB;
+
+			ieee->rate = 108;
+		}else{
+			ieee->current_network.rates_ex_len = 0;
+			ieee->rate = 22;
+		}
+
+		// By default, WMM function will be disabled in IBSS mode
+		ieee->current_network.QoS_Enable = 0;
+		ieee->SetWirelessMode(ieee->dev, IEEE_G);
+		ieee->current_network.atim_window = 0;
+		ieee->current_network.capability = WLAN_CAPABILITY_IBSS;
+		if(ieee->short_slot)
+			ieee->current_network.capability |= WLAN_CAPABILITY_SHORT_SLOT;
+
+	}
+
+	ieee->state = IEEE80211_LINKED;
+
+	ieee->set_chan(ieee->dev, ieee->current_network.channel);
+	ieee->link_change(ieee->dev);
+	if(ieee->LedControlHandler != NULL)
+	        ieee->LedControlHandler(ieee->dev,LED_CTL_LINK);
+	notify_wx_assoc_event(ieee);
+
+	ieee80211_start_send_beacons(ieee);
+
+	if (ieee->data_hard_resume)
+		ieee->data_hard_resume(ieee->dev);
+	netif_carrier_on(ieee->dev);
+
+	up(&ieee->wx_sem);
+}
+
+inline void ieee80211_start_ibss(struct ieee80211_device *ieee)
+{
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	queue_delayed_work(ieee->wq, &ieee->start_ibss_wq, 150);
+#else
+	schedule_task(&ieee->start_ibss_wq);
+#endif
+}
+
+/* this is called only in user context, with wx_sem held */
+void ieee80211_start_bss(struct ieee80211_device *ieee)
+{
+	unsigned long flags;
+#ifdef ENABLE_DOT11D
+	//
+	// Ref: 802.11d 11.1.3.3
+	// STA shall not start a BSS unless properly formed Beacon frame including a Country IE.
+	//
+	if(IS_DOT11D_ENABLE(ieee) && !IS_COUNTRY_IE_VALID(ieee))
+	{
+		if(! ieee->bGlobalDomain)
+		{
+			return;
+		}
+	}
+#endif
+	/* check if we have already found the net we
+	 * are interested in (if any).
+	 * if not (we are disassociated and we are not
+	 * in associating / authenticating phase) start the background scanning.
+	 */
+	ieee80211_softmac_check_all_nets(ieee);
+
+	/* ensure no-one start an associating process (thus setting
+	 * the ieee->state to ieee80211_ASSOCIATING) while we
+	 * have just cheked it and we are going to enable scan.
+	 * The ieee80211_new_net function is always called with
+	 * lock held (from both ieee80211_softmac_check_all_nets and
+	 * the rx path), so we cannot be in the middle of such function
+	 */
+	spin_lock_irqsave(&ieee->lock, flags);
+
+	if (ieee->state == IEEE80211_NOLINK){
+		ieee->actscanning = true;
+		ieee80211_start_scan(ieee);
+	}
+	spin_unlock_irqrestore(&ieee->lock, flags);
+}
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+void ieee80211_link_change_wq(struct work_struct *work)
+{
+        struct delayed_work *dwork = container_of(work, struct delayed_work, work);
+        struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, link_change_wq);
+#else
+void ieee80211_link_change_wq(struct ieee80211_device *ieee)
+{
+#endif
+	ieee->link_change(ieee->dev);
+}
+/* called only in userspace context */
+void ieee80211_disassociate(struct ieee80211_device *ieee)
+{
+
+
+	netif_carrier_off(ieee->dev);
+	if (ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE)
+			ieee80211_reset_queue(ieee);
+
+	if (ieee->data_hard_stop)
+			ieee->data_hard_stop(ieee->dev);
+#ifdef ENABLE_DOT11D
+	if(IS_DOT11D_ENABLE(ieee))
+		Dot11d_Reset(ieee);
+#endif
+	ieee->state = IEEE80211_NOLINK;
+	ieee->is_set_key = false;
+
+	//LZM for usb dev crash.
+	//ieee->link_change(ieee->dev);
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	queue_delayed_work(ieee->wq, &ieee->link_change_wq, 0);
+#else
+	schedule_task(&ieee->link_change_wq);
+#endif
+
+	//HTSetConnectBwMode(ieee, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT);
+	notify_wx_assoc_event(ieee);
+
+}
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+void ieee80211_associate_retry_wq(struct work_struct *work)
+{
+        struct delayed_work *dwork = container_of(work, struct delayed_work, work);
+        struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, associate_retry_wq);
+#else
+void ieee80211_associate_retry_wq(struct ieee80211_device *ieee)
+{
+#endif
+	unsigned long flags;
+
+	down(&ieee->wx_sem);
+	if(!ieee->proto_started)
+		goto exit;
+
+	if(ieee->state != IEEE80211_ASSOCIATING_RETRY)
+		goto exit;
+
+	/* until we do not set the state to IEEE80211_NOLINK
+	* there are no possibility to have someone else trying
+	* to start an association procdure (we get here with
+	* ieee->state = IEEE80211_ASSOCIATING).
+	* When we set the state to IEEE80211_NOLINK it is possible
+	* that the RX path run an attempt to associate, but
+	* both ieee80211_softmac_check_all_nets and the
+	* RX path works with ieee->lock held so there are no
+	* problems. If we are still disassociated then start a scan.
+	* the lock here is necessary to ensure no one try to start
+	* an association procedure when we have just checked the
+	* state and we are going to start the scan.
+	*/
+	ieee->beinretry = true;
+	ieee->state = IEEE80211_NOLINK;
+
+	ieee80211_softmac_check_all_nets(ieee);
+
+	spin_lock_irqsave(&ieee->lock, flags);
+
+	if(ieee->state == IEEE80211_NOLINK)
+	{
+		ieee->actscanning = true;
+		ieee80211_start_scan(ieee);
+	}
+	spin_unlock_irqrestore(&ieee->lock, flags);
+
+	ieee->beinretry = false;
+exit:
+	up(&ieee->wx_sem);
+}
+
+struct sk_buff *ieee80211_get_beacon_(struct ieee80211_device *ieee)
+{
+	u8 broadcast_addr[] = {0xff,0xff,0xff,0xff,0xff,0xff};
+
+	struct sk_buff *skb;
+	struct ieee80211_probe_response *b;
+
+	skb = ieee80211_probe_resp(ieee, broadcast_addr);
+
+	if (!skb)
+		return NULL;
+
+	b = (struct ieee80211_probe_response *) skb->data;
+	b->header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_BEACON);
+
+	return skb;
+
+}
+
+struct sk_buff *ieee80211_get_beacon(struct ieee80211_device *ieee)
+{
+	struct sk_buff *skb;
+	struct ieee80211_probe_response *b;
+
+	skb = ieee80211_get_beacon_(ieee);
+	if(!skb)
+		return NULL;
+
+	b = (struct ieee80211_probe_response *) skb->data;
+	b->header.seq_ctl = cpu_to_le16(ieee->seq_ctrl[0] << 4);
+
+	if (ieee->seq_ctrl[0] == 0xFFF)
+		ieee->seq_ctrl[0] = 0;
+	else
+		ieee->seq_ctrl[0]++;
+
+	return skb;
+}
+
+void ieee80211_softmac_stop_protocol(struct ieee80211_device *ieee)
+{
+	ieee->sync_scan_hurryup = 1;
+	down(&ieee->wx_sem);
+	ieee80211_stop_protocol(ieee);
+	up(&ieee->wx_sem);
+}
+
+
+void ieee80211_stop_protocol(struct ieee80211_device *ieee)
+{
+	if (!ieee->proto_started)
+		return;
+
+	ieee->proto_started = 0;
+
+	ieee80211_stop_send_beacons(ieee);
+	del_timer_sync(&ieee->associate_timer);
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	cancel_delayed_work(&ieee->associate_retry_wq);
+	cancel_delayed_work(&ieee->start_ibss_wq);
+	cancel_delayed_work(&ieee->link_change_wq);
+#endif
+	ieee80211_stop_scan(ieee);
+
+	ieee80211_disassociate(ieee);
+	RemoveAllTS(ieee); //added as we disconnect from the previous BSS, Remove all TS
+}
+
+void ieee80211_softmac_start_protocol(struct ieee80211_device *ieee)
+{
+	ieee->sync_scan_hurryup = 0;
+	down(&ieee->wx_sem);
+	ieee80211_start_protocol(ieee);
+	up(&ieee->wx_sem);
+}
+
+void ieee80211_start_protocol(struct ieee80211_device *ieee)
+{
+	short ch = 0;
+ 	int i = 0;
+	if (ieee->proto_started)
+		return;
+
+	ieee->proto_started = 1;
+
+	if (ieee->current_network.channel == 0){
+		do{
+			ch++;
+			if (ch > MAX_CHANNEL_NUMBER)
+				return; /* no channel found */
+#ifdef ENABLE_DOT11D
+		}while(!GET_DOT11D_INFO(ieee)->channel_map[ch]);
+#else
+		}while(!ieee->channel_map[ch]);
+#endif
+		ieee->current_network.channel = ch;
+	}
+
+	if (ieee->current_network.beacon_interval == 0)
+		ieee->current_network.beacon_interval = 100;
+//	printk("===>%s(), chan:%d\n", __FUNCTION__, ieee->current_network.channel);
+//	ieee->set_chan(ieee->dev,ieee->current_network.channel);
+
+       	for(i = 0; i < 17; i++) {
+	  ieee->last_rxseq_num[i] = -1;
+	  ieee->last_rxfrag_num[i] = -1;
+	  ieee->last_packet_time[i] = 0;
+	}
+
+	ieee->init_wmmparam_flag = 0;//reinitialize AC_xx_PARAM registers.
+
+
+	/* if the user set the MAC of the ad-hoc cell and then
+	 * switch to managed mode, shall we  make sure that association
+	 * attempts does not fail just because the user provide the essid
+	 * and the nic is still checking for the AP MAC ??
+	 */
+	if (ieee->iw_mode == IW_MODE_INFRA)
+		ieee80211_start_bss(ieee);
+
+	else if (ieee->iw_mode == IW_MODE_ADHOC)
+		ieee80211_start_ibss(ieee);
+
+	else if (ieee->iw_mode == IW_MODE_MASTER)
+		ieee80211_start_master_bss(ieee);
+
+	else if(ieee->iw_mode == IW_MODE_MONITOR)
+		ieee80211_start_monitor_mode(ieee);
+}
+
+
+#define DRV_NAME  "Ieee80211"
+void ieee80211_softmac_init(struct ieee80211_device *ieee)
+{
+	int i;
+	memset(&ieee->current_network, 0, sizeof(struct ieee80211_network));
+
+	ieee->state = IEEE80211_NOLINK;
+	ieee->sync_scan_hurryup = 0;
+	for(i = 0; i < 5; i++) {
+	  ieee->seq_ctrl[i] = 0;
+	}
+#ifdef ENABLE_DOT11D
+	ieee->pDot11dInfo = kmalloc(sizeof(RT_DOT11D_INFO), GFP_ATOMIC);
+	if (!ieee->pDot11dInfo)
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't alloc memory for DOT11D\n");
+	memset(ieee->pDot11dInfo, 0, sizeof(RT_DOT11D_INFO));
+#endif
+	//added for  AP roaming
+	ieee->LinkDetectInfo.SlotNum = 2;
+	ieee->LinkDetectInfo.NumRecvBcnInPeriod=0;
+        ieee->LinkDetectInfo.NumRecvDataInPeriod=0;
+
+	ieee->assoc_id = 0;
+	ieee->queue_stop = 0;
+	ieee->scanning = 0;
+	ieee->softmac_features = 0; //so IEEE2100-like driver are happy
+	ieee->wap_set = 0;
+	ieee->ssid_set = 0;
+	ieee->proto_started = 0;
+	ieee->basic_rate = IEEE80211_DEFAULT_BASIC_RATE;
+	ieee->rate = 22;
+	ieee->ps = IEEE80211_PS_DISABLED;
+	ieee->sta_sleep = 0;
+	ieee->Regdot11HTOperationalRateSet[0]= 0xff;//support MCS 0~7
+	ieee->Regdot11HTOperationalRateSet[1]= 0xff;//support MCS 8~15
+	ieee->Regdot11HTOperationalRateSet[4]= 0x01;
+	//added by amy
+	ieee->actscanning = false;
+	ieee->beinretry = false;
+	ieee->is_set_key = false;
+	init_mgmt_queue(ieee);
+
+	ieee->sta_edca_param[0] = 0x0000A403;
+	ieee->sta_edca_param[1] = 0x0000A427;
+	ieee->sta_edca_param[2] = 0x005E4342;
+	ieee->sta_edca_param[3] = 0x002F3262;
+	ieee->aggregation = true;
+	ieee->enable_rx_imm_BA = 1;
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+	init_timer(&ieee->scan_timer);
+	ieee->scan_timer.data = (unsigned long)ieee;
+	ieee->scan_timer.function = ieee80211_softmac_scan_cb;
+#endif
+	ieee->tx_pending.txb = NULL;
+
+	init_timer(&ieee->associate_timer);
+	ieee->associate_timer.data = (unsigned long)ieee;
+	ieee->associate_timer.function = ieee80211_associate_abort_cb;
+
+	init_timer(&ieee->beacon_timer);
+	ieee->beacon_timer.data = (unsigned long) ieee;
+	ieee->beacon_timer.function = ieee80211_send_beacon_cb;
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+#ifdef PF_SYNCTHREAD
+	ieee->wq = create_workqueue(DRV_NAME,0);
+#else
+	ieee->wq = create_workqueue(DRV_NAME);
+#endif
+#endif
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+        INIT_DELAYED_WORK(&ieee->link_change_wq,ieee80211_link_change_wq);
+        INIT_DELAYED_WORK(&ieee->start_ibss_wq,ieee80211_start_ibss_wq);
+        INIT_WORK(&ieee->associate_complete_wq, ieee80211_associate_complete_wq);
+        INIT_WORK(&ieee->associate_procedure_wq, ieee80211_associate_procedure_wq);
+        INIT_DELAYED_WORK(&ieee->softmac_scan_wq,ieee80211_softmac_scan_wq);
+        INIT_DELAYED_WORK(&ieee->associate_retry_wq, ieee80211_associate_retry_wq);
+        INIT_WORK(&ieee->wx_sync_scan_wq,ieee80211_wx_sync_scan_wq);
+
+#else
+	INIT_WORK(&ieee->link_change_wq,(void(*)(void*)) ieee80211_link_change_wq,ieee);
+	INIT_WORK(&ieee->start_ibss_wq,(void(*)(void*)) ieee80211_start_ibss_wq,ieee);
+	INIT_WORK(&ieee->associate_retry_wq,(void(*)(void*)) ieee80211_associate_retry_wq,ieee);
+	INIT_WORK(&ieee->associate_complete_wq,(void(*)(void*)) ieee80211_associate_complete_wq,ieee);
+	INIT_WORK(&ieee->associate_procedure_wq,(void(*)(void*)) ieee80211_associate_procedure_wq,ieee);
+	INIT_WORK(&ieee->softmac_scan_wq,(void(*)(void*)) ieee80211_softmac_scan_wq,ieee);
+	INIT_WORK(&ieee->wx_sync_scan_wq,(void(*)(void*)) ieee80211_wx_sync_scan_wq,ieee);
+#endif
+
+#else
+	tq_init(&ieee->link_change_wq,(void(*)(void*)) ieee80211_link_change_wq,ieee);
+	tq_init(&ieee->start_ibss_wq,(void(*)(void*)) ieee80211_start_ibss_wq,ieee);
+	tq_init(&ieee->associate_retry_wq,(void(*)(void*)) ieee80211_associate_retry_wq,ieee);
+	tq_init(&ieee->associate_complete_wq,(void(*)(void*)) ieee80211_associate_complete_wq,ieee);
+	tq_init(&ieee->associate_procedure_wq,(void(*)(void*)) ieee80211_associate_procedure_wq,ieee);
+	tq_init(&ieee->softmac_scan_wq,(void(*)(void*)) ieee80211_softmac_scan_wq,ieee);
+	tq_init(&ieee->wx_sync_scan_wq,(void(*)(void*)) ieee80211_wx_sync_scan_wq,ieee);
+#endif
+	sema_init(&ieee->wx_sem, 1);
+	sema_init(&ieee->scan_sem, 1);
+
+	spin_lock_init(&ieee->mgmt_tx_lock);
+	spin_lock_init(&ieee->beacon_lock);
+
+	tasklet_init(&ieee->ps_task,
+	     (void(*)(unsigned long)) ieee80211_sta_ps,
+	     (unsigned long)ieee);
+
+}
+
+void ieee80211_softmac_free(struct ieee80211_device *ieee)
+{
+	down(&ieee->wx_sem);
+#ifdef ENABLE_DOT11D
+	if(NULL != ieee->pDot11dInfo)
+	{
+		kfree(ieee->pDot11dInfo);
+		ieee->pDot11dInfo = NULL;
+	}
+#endif
+	del_timer_sync(&ieee->associate_timer);
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	cancel_delayed_work(&ieee->associate_retry_wq);
+	destroy_workqueue(ieee->wq);
+#endif
+
+	up(&ieee->wx_sem);
+}
+
+/********************************************************
+ * Start of WPA code.                                   *
+ * this is stolen from the ipw2200 driver               *
+ ********************************************************/
+
+
+static int ieee80211_wpa_enable(struct ieee80211_device *ieee, int value)
+{
+	/* This is called when wpa_supplicant loads and closes the driver
+	 * interface. */
+	printk("%s WPA\n",value ? "enabling" : "disabling");
+	ieee->wpa_enabled = value;
+	memset(ieee->ap_mac_addr, 0, 6); //reset ap_mac_addr everytime it starts wpa.
+	return 0;
+}
+
+
+void ieee80211_wpa_assoc_frame(struct ieee80211_device *ieee, char *wpa_ie, int wpa_ie_len)
+{
+	/* make sure WPA is enabled */
+	ieee80211_wpa_enable(ieee, 1);
+
+	ieee80211_disassociate(ieee);
+}
+
+
+static int ieee80211_wpa_mlme(struct ieee80211_device *ieee, int command, int reason)
+{
+
+	int ret = 0;
+
+	switch (command) {
+	case IEEE_MLME_STA_DEAUTH:
+		// silently ignore
+		break;
+
+	case IEEE_MLME_STA_DISASSOC:
+		ieee80211_disassociate(ieee);
+		break;
+
+	default:
+		printk("Unknown MLME request: %d\n", command);
+		ret = -EOPNOTSUPP;
+	}
+
+	return ret;
+}
+
+
+static int ieee80211_wpa_set_wpa_ie(struct ieee80211_device *ieee,
+			      struct ieee_param *param, int plen)
+{
+	u8 *buf;
+
+	if (param->u.wpa_ie.len > MAX_WPA_IE_LEN ||
+	    (param->u.wpa_ie.len && param->u.wpa_ie.data == NULL))
+		return -EINVAL;
+
+	if (param->u.wpa_ie.len) {
+		buf = kmalloc(param->u.wpa_ie.len, GFP_KERNEL);
+		if (buf == NULL)
+			return -ENOMEM;
+
+		memcpy(buf, param->u.wpa_ie.data, param->u.wpa_ie.len);
+		kfree(ieee->wpa_ie);
+		ieee->wpa_ie = buf;
+		ieee->wpa_ie_len = param->u.wpa_ie.len;
+	} else {
+		kfree(ieee->wpa_ie);
+		ieee->wpa_ie = NULL;
+		ieee->wpa_ie_len = 0;
+	}
+
+	ieee80211_wpa_assoc_frame(ieee, ieee->wpa_ie, ieee->wpa_ie_len);
+	return 0;
+}
+
+#define AUTH_ALG_OPEN_SYSTEM			0x1
+#define AUTH_ALG_SHARED_KEY			0x2
+#define AUTH_ALG_LEAP				0x4
+static int ieee80211_wpa_set_auth_algs(struct ieee80211_device *ieee, int value)
+{
+
+	struct ieee80211_security sec = {
+		.flags = SEC_AUTH_MODE,
+	};
+	int ret = 0;
+
+	if (value & AUTH_ALG_SHARED_KEY) {
+		sec.auth_mode = WLAN_AUTH_SHARED_KEY;
+		ieee->open_wep = 0;
+		ieee->auth_mode = 1;
+	} else if (value & AUTH_ALG_OPEN_SYSTEM){
+		sec.auth_mode = WLAN_AUTH_OPEN;
+		ieee->open_wep = 1;
+		ieee->auth_mode = 0;
+	}
+	else if (value & AUTH_ALG_LEAP){
+		sec.auth_mode = WLAN_AUTH_LEAP;
+		ieee->open_wep = 1;
+		ieee->auth_mode = 2;
+	}
+
+
+	if (ieee->set_security)
+		ieee->set_security(ieee->dev, &sec);
+	//else
+	//	ret = -EOPNOTSUPP;
+
+	return ret;
+}
+
+static int ieee80211_wpa_set_param(struct ieee80211_device *ieee, u8 name, u32 value)
+{
+	int ret=0;
+	unsigned long flags;
+
+	switch (name) {
+	case IEEE_PARAM_WPA_ENABLED:
+		ret = ieee80211_wpa_enable(ieee, value);
+		break;
+
+	case IEEE_PARAM_TKIP_COUNTERMEASURES:
+		ieee->tkip_countermeasures=value;
+		break;
+
+	case IEEE_PARAM_DROP_UNENCRYPTED: {
+		/* HACK:
+		 *
+		 * wpa_supplicant calls set_wpa_enabled when the driver
+		 * is loaded and unloaded, regardless of if WPA is being
+		 * used.  No other calls are made which can be used to
+		 * determine if encryption will be used or not prior to
+		 * association being expected.  If encryption is not being
+		 * used, drop_unencrypted is set to false, else true -- we
+		 * can use this to determine if the CAP_PRIVACY_ON bit should
+		 * be set.
+		 */
+		struct ieee80211_security sec = {
+			.flags = SEC_ENABLED,
+			.enabled = value,
+		};
+ 		ieee->drop_unencrypted = value;
+		/* We only change SEC_LEVEL for open mode. Others
+		 * are set by ipw_wpa_set_encryption.
+		 */
+		if (!value) {
+			sec.flags |= SEC_LEVEL;
+			sec.level = SEC_LEVEL_0;
+		}
+		else {
+			sec.flags |= SEC_LEVEL;
+			sec.level = SEC_LEVEL_1;
+		}
+		if (ieee->set_security)
+			ieee->set_security(ieee->dev, &sec);
+		break;
+	}
+
+	case IEEE_PARAM_PRIVACY_INVOKED:
+		ieee->privacy_invoked=value;
+		break;
+
+	case IEEE_PARAM_AUTH_ALGS:
+		ret = ieee80211_wpa_set_auth_algs(ieee, value);
+		break;
+
+	case IEEE_PARAM_IEEE_802_1X:
+		ieee->ieee802_1x=value;
+		break;
+	case IEEE_PARAM_WPAX_SELECT:
+		// added for WPA2 mixed mode
+		spin_lock_irqsave(&ieee->wpax_suitlist_lock,flags);
+		ieee->wpax_type_set = 1;
+		ieee->wpax_type_notify = value;
+		spin_unlock_irqrestore(&ieee->wpax_suitlist_lock,flags);
+		break;
+
+	default:
+		printk("Unknown WPA param: %d\n",name);
+		ret = -EOPNOTSUPP;
+	}
+
+	return ret;
+}
+
+/* implementation borrowed from hostap driver */
+
+static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee,
+				  struct ieee_param *param, int param_len)
+{
+	int ret = 0;
+
+	struct ieee80211_crypto_ops *ops;
+	struct ieee80211_crypt_data **crypt;
+
+	struct ieee80211_security sec = {
+		.flags = 0,
+	};
+
+	param->u.crypt.err = 0;
+	param->u.crypt.alg[IEEE_CRYPT_ALG_NAME_LEN - 1] = '\0';
+
+	if (param_len !=
+	    (int) ((char *) param->u.crypt.key - (char *) param) +
+	    param->u.crypt.key_len) {
+		printk("Len mismatch %d, %d\n", param_len,
+			       param->u.crypt.key_len);
+		return -EINVAL;
+	}
+	if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
+	    param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
+	    param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) {
+		if (param->u.crypt.idx >= WEP_KEYS)
+			return -EINVAL;
+		crypt = &ieee->crypt[param->u.crypt.idx];
+	} else {
+		return -EINVAL;
+	}
+
+	if (strcmp(param->u.crypt.alg, "none") == 0) {
+		if (crypt) {
+			sec.enabled = 0;
+			// FIXME FIXME
+			//sec.encrypt = 0;
+			sec.level = SEC_LEVEL_0;
+			sec.flags |= SEC_ENABLED | SEC_LEVEL;
+			ieee80211_crypt_delayed_deinit(ieee, crypt);
+		}
+		goto done;
+	}
+	sec.enabled = 1;
+// FIXME FIXME
+//	sec.encrypt = 1;
+	sec.flags |= SEC_ENABLED;
+
+	/* IPW HW cannot build TKIP MIC, host decryption still needed. */
+	if (!(ieee->host_encrypt || ieee->host_decrypt) &&
+	    strcmp(param->u.crypt.alg, "TKIP"))
+		goto skip_host_crypt;
+
+	ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
+	if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) {
+		request_module("ieee80211_crypt_wep");
+		ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
+		//set WEP40 first, it will be modified according to WEP104 or WEP40 at other place
+	} else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) {
+		request_module("ieee80211_crypt_tkip");
+		ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
+	} else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) {
+		request_module("ieee80211_crypt_ccmp");
+		ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
+	}
+	if (ops == NULL) {
+		printk("unknown crypto alg '%s'\n", param->u.crypt.alg);
+		param->u.crypt.err = IEEE_CRYPT_ERR_UNKNOWN_ALG;
+		ret = -EINVAL;
+		goto done;
+	}
+
+	if (*crypt == NULL || (*crypt)->ops != ops) {
+		struct ieee80211_crypt_data *new_crypt;
+
+		ieee80211_crypt_delayed_deinit(ieee, crypt);
+
+		new_crypt = (struct ieee80211_crypt_data *)
+			kmalloc(sizeof(*new_crypt), GFP_KERNEL);
+		if (new_crypt == NULL) {
+			ret = -ENOMEM;
+			goto done;
+		}
+		memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data));
+		new_crypt->ops = ops;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+		if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
+#else
+		if (new_crypt->ops && try_inc_mod_count(new_crypt->ops->owner))
+#endif
+			new_crypt->priv =
+				new_crypt->ops->init(param->u.crypt.idx);
+
+		if (new_crypt->priv == NULL) {
+			kfree(new_crypt);
+			param->u.crypt.err = IEEE_CRYPT_ERR_CRYPT_INIT_FAILED;
+			ret = -EINVAL;
+			goto done;
+		}
+
+		*crypt = new_crypt;
+	}
+
+	if (param->u.crypt.key_len > 0 && (*crypt)->ops->set_key &&
+	    (*crypt)->ops->set_key(param->u.crypt.key,
+				   param->u.crypt.key_len, param->u.crypt.seq,
+				   (*crypt)->priv) < 0) {
+		printk("key setting failed\n");
+		param->u.crypt.err = IEEE_CRYPT_ERR_KEY_SET_FAILED;
+		ret = -EINVAL;
+		goto done;
+	}
+
+ skip_host_crypt:
+	if (param->u.crypt.set_tx) {
+		ieee->tx_keyidx = param->u.crypt.idx;
+		sec.active_key = param->u.crypt.idx;
+		sec.flags |= SEC_ACTIVE_KEY;
+	} else
+		sec.flags &= ~SEC_ACTIVE_KEY;
+
+	if (param->u.crypt.alg != NULL) {
+		memcpy(sec.keys[param->u.crypt.idx],
+		       param->u.crypt.key,
+		       param->u.crypt.key_len);
+		sec.key_sizes[param->u.crypt.idx] = param->u.crypt.key_len;
+		sec.flags |= (1 << param->u.crypt.idx);
+
+		if (strcmp(param->u.crypt.alg, "WEP") == 0) {
+			sec.flags |= SEC_LEVEL;
+			sec.level = SEC_LEVEL_1;
+		} else if (strcmp(param->u.crypt.alg, "TKIP") == 0) {
+			sec.flags |= SEC_LEVEL;
+			sec.level = SEC_LEVEL_2;
+		} else if (strcmp(param->u.crypt.alg, "CCMP") == 0) {
+			sec.flags |= SEC_LEVEL;
+			sec.level = SEC_LEVEL_3;
+		}
+	}
+ done:
+	if (ieee->set_security)
+		ieee->set_security(ieee->dev, &sec);
+
+	/* Do not reset port if card is in Managed mode since resetting will
+	 * generate new IEEE 802.11 authentication which may end up in looping
+	 * with IEEE 802.1X.  If your hardware requires a reset after WEP
+	 * configuration (for example... Prism2), implement the reset_port in
+	 * the callbacks structures used to initialize the 802.11 stack. */
+	if (ieee->reset_on_keychange &&
+	    ieee->iw_mode != IW_MODE_INFRA &&
+	    ieee->reset_port &&
+	    ieee->reset_port(ieee->dev)) {
+		printk("reset_port failed\n");
+		param->u.crypt.err = IEEE_CRYPT_ERR_CARD_CONF_FAILED;
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+inline struct sk_buff *ieee80211_disassociate_skb(
+							struct ieee80211_network *beacon,
+							struct ieee80211_device *ieee,
+							u8	asRsn)
+{
+	struct sk_buff *skb;
+	struct ieee80211_disassoc *disass;
+
+	skb = dev_alloc_skb(sizeof(struct ieee80211_disassoc));
+	if (!skb)
+		return NULL;
+
+	disass = (struct ieee80211_disassoc *) skb_put(skb,sizeof(struct ieee80211_disassoc));
+	disass->header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_DISASSOC);
+	disass->header.duration_id = 0;
+
+	memcpy(disass->header.addr1, beacon->bssid, ETH_ALEN);
+	memcpy(disass->header.addr2, ieee->dev->dev_addr, ETH_ALEN);
+	memcpy(disass->header.addr3, beacon->bssid, ETH_ALEN);
+
+	disass->reason = asRsn;
+	return skb;
+}
+
+
+void
+SendDisassociation(
+		struct ieee80211_device *ieee,
+		u8* 					asSta,
+		u8						asRsn
+)
+{
+		struct ieee80211_network *beacon = &ieee->current_network;
+		struct sk_buff *skb;
+		skb = ieee80211_disassociate_skb(beacon,ieee,asRsn);
+		if (skb){
+				softmac_mgmt_xmit(skb, ieee);
+				//dev_kfree_skb_any(skb);//edit by thomas
+		}
+}
+
+int ieee80211_wpa_supplicant_ioctl(struct ieee80211_device *ieee, struct iw_point *p)
+{
+	struct ieee_param *param;
+	int ret=0;
+
+	down(&ieee->wx_sem);
+	//IEEE_DEBUG_INFO("wpa_supplicant: len=%d\n", p->length);
+
+	if (p->length < sizeof(struct ieee_param) || !p->pointer){
+		ret = -EINVAL;
+		goto out;
+	}
+
+	param = (struct ieee_param *)kmalloc(p->length, GFP_KERNEL);
+	if (param == NULL){
+		ret = -ENOMEM;
+		goto out;
+	}
+	if (copy_from_user(param, p->pointer, p->length)) {
+		kfree(param);
+		ret = -EFAULT;
+		goto out;
+	}
+
+	switch (param->cmd) {
+
+	case IEEE_CMD_SET_WPA_PARAM:
+		ret = ieee80211_wpa_set_param(ieee, param->u.wpa_param.name,
+					param->u.wpa_param.value);
+		break;
+
+	case IEEE_CMD_SET_WPA_IE:
+		ret = ieee80211_wpa_set_wpa_ie(ieee, param, p->length);
+		break;
+
+	case IEEE_CMD_SET_ENCRYPTION:
+		ret = ieee80211_wpa_set_encryption(ieee, param, p->length);
+		break;
+
+	case IEEE_CMD_MLME:
+		ret = ieee80211_wpa_mlme(ieee, param->u.mlme.command,
+				   param->u.mlme.reason_code);
+		break;
+
+	default:
+		printk("Unknown WPA supplicant request: %d\n",param->cmd);
+		ret = -EOPNOTSUPP;
+		break;
+	}
+
+	if (ret == 0 && copy_to_user(p->pointer, param, p->length))
+		ret = -EFAULT;
+
+	kfree(param);
+out:
+	up(&ieee->wx_sem);
+
+	return ret;
+}
+
+void notify_wx_assoc_event(struct ieee80211_device *ieee)
+{
+	union iwreq_data wrqu;
+	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+	if (ieee->state == IEEE80211_LINKED)
+		memcpy(wrqu.ap_addr.sa_data, ieee->current_network.bssid, ETH_ALEN);
+	else
+		memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN);
+	wireless_send_event(ieee->dev, SIOCGIWAP, &wrqu, NULL);
+}
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+EXPORT_SYMBOL(ieee80211_get_beacon);
+EXPORT_SYMBOL(ieee80211_wake_queue);
+EXPORT_SYMBOL(ieee80211_stop_queue);
+EXPORT_SYMBOL(ieee80211_reset_queue);
+EXPORT_SYMBOL(ieee80211_softmac_stop_protocol);
+EXPORT_SYMBOL(ieee80211_softmac_start_protocol);
+EXPORT_SYMBOL(ieee80211_is_shortslot);
+EXPORT_SYMBOL(ieee80211_is_54g);
+EXPORT_SYMBOL(ieee80211_wpa_supplicant_ioctl);
+EXPORT_SYMBOL(ieee80211_ps_tx_ack);
+EXPORT_SYMBOL(ieee80211_softmac_xmit);
+EXPORT_SYMBOL(ieee80211_stop_send_beacons);
+EXPORT_SYMBOL(notify_wx_assoc_event);
+EXPORT_SYMBOL(SendDisassociation);
+EXPORT_SYMBOL(ieee80211_disassociate);
+EXPORT_SYMBOL(ieee80211_start_send_beacons);
+EXPORT_SYMBOL(ieee80211_stop_scan);
+EXPORT_SYMBOL(ieee80211_send_probe_requests);
+EXPORT_SYMBOL(ieee80211_softmac_scan_syncro);
+EXPORT_SYMBOL(ieee80211_start_scan_syncro);
+#else
+EXPORT_SYMBOL_NOVERS(ieee80211_get_beacon);
+EXPORT_SYMBOL_NOVERS(ieee80211_wake_queue);
+EXPORT_SYMBOL_NOVERS(ieee80211_stop_queue);
+EXPORT_SYMBOL_NOVERS(ieee80211_reset_queue);
+EXPORT_SYMBOL_NOVERS(ieee80211_softmac_stop_protocol);
+EXPORT_SYMBOL_NOVERS(ieee80211_softmac_start_protocol);
+EXPORT_SYMBOL_NOVERS(ieee80211_is_shortslot);
+EXPORT_SYMBOL_NOVERS(ieee80211_is_54g);
+EXPORT_SYMBOL_NOVERS(ieee80211_wpa_supplicant_ioctl);
+EXPORT_SYMBOL_NOVERS(ieee80211_ps_tx_ack);
+EXPORT_SYMBOL_NOVERS(ieee80211_softmac_xmit);
+EXPORT_SYMBOL_NOVERS(ieee80211_stop_send_beacons);
+EXPORT_SYMBOL_NOVERS(notify_wx_assoc_event);
+EXPORT_SYMBOL_NOVERS(SendDisassociation);
+EXPORT_SYMBOL_NOVERS(ieee80211_disassociate);
+EXPORT_SYMBOL_NOVERS(ieee80211_start_send_beacons);
+EXPORT_SYMBOL_NOVERS(ieee80211_stop_scan);
+EXPORT_SYMBOL_NOVERS(ieee80211_send_probe_requests);
+EXPORT_SYMBOL_NOVERS(ieee80211_softmac_scan_syncro);
+EXPORT_SYMBOL_NOVERS(ieee80211_start_scan_syncro);
+#endif
+//EXPORT_SYMBOL(ieee80211_sta_ps_send_null_frame);
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c
new file mode 100644
index 00000000000..1f50c46dcb9
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c
@@ -0,0 +1,711 @@
+/* IEEE 802.11 SoftMAC layer
+ * Copyright (c) 2005 Andrea Merello <andreamrl@tiscali.it>
+ *
+ * Mostly extracted from the rtl8180-sa2400 driver for the
+ * in-kernel generic ieee802.11 stack.
+ *
+ * Some pieces of code might be stolen from ipw2100 driver
+ * copyright of who own it's copyright ;-)
+ *
+ * PS wx handler mostly stolen from hostap, copyright who
+ * own it's copyright ;-)
+ *
+ * released under the GPL
+ */
+
+
+#include "ieee80211.h"
+#ifdef ENABLE_DOT11D
+#include "dot11d.h"
+#endif
+/* FIXME: add A freqs */
+
+const long ieee80211_wlan_frequencies[] = {
+	2412, 2417, 2422, 2427,
+	2432, 2437, 2442, 2447,
+	2452, 2457, 2462, 2467,
+	2472, 2484
+};
+
+
+int ieee80211_wx_set_freq(struct ieee80211_device *ieee, struct iw_request_info *a,
+			     union iwreq_data *wrqu, char *b)
+{
+	int ret;
+	struct iw_freq *fwrq = & wrqu->freq;
+
+	down(&ieee->wx_sem);
+
+	if(ieee->iw_mode == IW_MODE_INFRA){
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	/* if setting by freq convert to channel */
+	if (fwrq->e == 1) {
+		if ((fwrq->m >= (int) 2.412e8 &&
+		     fwrq->m <= (int) 2.487e8)) {
+			int f = fwrq->m / 100000;
+			int c = 0;
+
+			while ((c < 14) && (f != ieee80211_wlan_frequencies[c]))
+				c++;
+
+			/* hack to fall through */
+			fwrq->e = 0;
+			fwrq->m = c + 1;
+		}
+	}
+
+	if (fwrq->e > 0 || fwrq->m > 14 || fwrq->m < 1 ){
+		ret = -EOPNOTSUPP;
+		goto out;
+
+	}else { /* Set the channel */
+
+#ifdef ENABLE_DOT11D
+		if (!(GET_DOT11D_INFO(ieee)->channel_map)[fwrq->m]) {
+			ret = -EINVAL;
+			goto out;
+		}
+#endif
+		ieee->current_network.channel = fwrq->m;
+		ieee->set_chan(ieee->dev, ieee->current_network.channel);
+
+		if(ieee->iw_mode == IW_MODE_ADHOC || ieee->iw_mode == IW_MODE_MASTER)
+			if(ieee->state == IEEE80211_LINKED){
+
+			ieee80211_stop_send_beacons(ieee);
+			ieee80211_start_send_beacons(ieee);
+			}
+	}
+
+	ret = 0;
+out:
+	up(&ieee->wx_sem);
+	return ret;
+}
+
+
+int ieee80211_wx_get_freq(struct ieee80211_device *ieee,
+			     struct iw_request_info *a,
+			     union iwreq_data *wrqu, char *b)
+{
+	struct iw_freq *fwrq = & wrqu->freq;
+
+	if (ieee->current_network.channel == 0)
+		return -1;
+	//NM 0.7.0 will not accept channel any more.
+	fwrq->m = ieee80211_wlan_frequencies[ieee->current_network.channel-1] * 100000;
+	fwrq->e = 1;
+//	fwrq->m = ieee->current_network.channel;
+//	fwrq->e = 0;
+
+	return 0;
+}
+
+int ieee80211_wx_get_wap(struct ieee80211_device *ieee,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu, char *extra)
+{
+	unsigned long flags;
+
+	wrqu->ap_addr.sa_family = ARPHRD_ETHER;
+
+	if (ieee->iw_mode == IW_MODE_MONITOR)
+		return -1;
+
+	/* We want avoid to give to the user inconsistent infos*/
+	spin_lock_irqsave(&ieee->lock, flags);
+
+	if (ieee->state != IEEE80211_LINKED &&
+		ieee->state != IEEE80211_LINKED_SCANNING &&
+		ieee->wap_set == 0)
+
+		memset(wrqu->ap_addr.sa_data, 0, ETH_ALEN);
+	else
+		memcpy(wrqu->ap_addr.sa_data,
+		       ieee->current_network.bssid, ETH_ALEN);
+
+	spin_unlock_irqrestore(&ieee->lock, flags);
+
+	return 0;
+}
+
+
+int ieee80211_wx_set_wap(struct ieee80211_device *ieee,
+			 struct iw_request_info *info,
+			 union iwreq_data *awrq,
+			 char *extra)
+{
+
+	int ret = 0;
+	u8 zero[] = {0,0,0,0,0,0};
+	unsigned long flags;
+
+	short ifup = ieee->proto_started;//dev->flags & IFF_UP;
+	struct sockaddr *temp = (struct sockaddr *)awrq;
+
+	ieee->sync_scan_hurryup = 1;
+
+	down(&ieee->wx_sem);
+	/* use ifconfig hw ether */
+	if (ieee->iw_mode == IW_MODE_MASTER){
+		ret = -1;
+		goto out;
+	}
+
+	if (temp->sa_family != ARPHRD_ETHER){
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (ifup)
+		ieee80211_stop_protocol(ieee);
+
+	/* just to avoid to give inconsistent infos in the
+	 * get wx method. not really needed otherwise
+	 */
+	spin_lock_irqsave(&ieee->lock, flags);
+
+	memcpy(ieee->current_network.bssid, temp->sa_data, ETH_ALEN);
+	ieee->wap_set = memcmp(temp->sa_data, zero,ETH_ALEN)!=0;
+
+	spin_unlock_irqrestore(&ieee->lock, flags);
+
+	if (ifup)
+		ieee80211_start_protocol(ieee);
+out:
+	up(&ieee->wx_sem);
+	return ret;
+}
+
+ int ieee80211_wx_get_essid(struct ieee80211_device *ieee, struct iw_request_info *a,union iwreq_data *wrqu,char *b)
+{
+	int len,ret = 0;
+	unsigned long flags;
+
+	if (ieee->iw_mode == IW_MODE_MONITOR)
+		return -1;
+
+	/* We want avoid to give to the user inconsistent infos*/
+	spin_lock_irqsave(&ieee->lock, flags);
+
+	if (ieee->current_network.ssid[0] == '\0' ||
+		ieee->current_network.ssid_len == 0){
+		ret = -1;
+		goto out;
+	}
+
+	if (ieee->state != IEEE80211_LINKED &&
+		ieee->state != IEEE80211_LINKED_SCANNING &&
+		ieee->ssid_set == 0){
+		ret = -1;
+		goto out;
+	}
+	len = ieee->current_network.ssid_len;
+	wrqu->essid.length = len;
+	strncpy(b,ieee->current_network.ssid,len);
+	wrqu->essid.flags = 1;
+
+out:
+	spin_unlock_irqrestore(&ieee->lock, flags);
+
+	return ret;
+
+}
+
+int ieee80211_wx_set_rate(struct ieee80211_device *ieee,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra)
+{
+
+	u32 target_rate = wrqu->bitrate.value;
+
+	ieee->rate = target_rate/100000;
+	//FIXME: we might want to limit rate also in management protocols.
+	return 0;
+}
+
+
+
+int ieee80211_wx_get_rate(struct ieee80211_device *ieee,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra)
+{
+	u32 tmp_rate = 0;
+#ifdef RTL8192SU
+	//printk("===>mode:%d, halfNmode:%d\n", ieee->mode, ieee->bHalfWirelessN24GMode);
+	if (ieee->mode & (IEEE_A | IEEE_B | IEEE_G))
+		tmp_rate = ieee->rate;
+	else if (ieee->mode & IEEE_N_5G)
+		tmp_rate = 580;
+	else if (ieee->mode & IEEE_N_24G)
+	{
+		if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))
+			tmp_rate = HTHalfMcsToDataRate(ieee, 15);
+		else
+			tmp_rate = HTMcsToDataRate(ieee, 15);
+	}
+#else
+	tmp_rate = TxCountToDataRate(ieee, ieee->softmac_stats.CurrentShowTxate);
+
+#endif
+	wrqu->bitrate.value = tmp_rate * 500000;
+
+	return 0;
+}
+
+
+int ieee80211_wx_set_rts(struct ieee80211_device *ieee,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra)
+{
+	if (wrqu->rts.disabled || !wrqu->rts.fixed)
+		ieee->rts = DEFAULT_RTS_THRESHOLD;
+	else
+	{
+		if (wrqu->rts.value < MIN_RTS_THRESHOLD ||
+				wrqu->rts.value > MAX_RTS_THRESHOLD)
+			return -EINVAL;
+		ieee->rts = wrqu->rts.value;
+	}
+	return 0;
+}
+
+int ieee80211_wx_get_rts(struct ieee80211_device *ieee,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra)
+{
+	wrqu->rts.value = ieee->rts;
+	wrqu->rts.fixed = 0;	/* no auto select */
+	wrqu->rts.disabled = (wrqu->rts.value == DEFAULT_RTS_THRESHOLD);
+	return 0;
+}
+int ieee80211_wx_set_mode(struct ieee80211_device *ieee, struct iw_request_info *a,
+			     union iwreq_data *wrqu, char *b)
+{
+
+	ieee->sync_scan_hurryup = 1;
+
+	down(&ieee->wx_sem);
+
+	if (wrqu->mode == ieee->iw_mode)
+		goto out;
+
+	if (wrqu->mode == IW_MODE_MONITOR){
+
+		ieee->dev->type = ARPHRD_IEEE80211;
+	}else{
+		ieee->dev->type = ARPHRD_ETHER;
+	}
+
+	if (!ieee->proto_started){
+		ieee->iw_mode = wrqu->mode;
+	}else{
+		ieee80211_stop_protocol(ieee);
+		ieee->iw_mode = wrqu->mode;
+		ieee80211_start_protocol(ieee);
+	}
+
+out:
+	up(&ieee->wx_sem);
+	return 0;
+}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+void ieee80211_wx_sync_scan_wq(struct work_struct *work)
+{
+        struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, wx_sync_scan_wq);
+#else
+void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee)
+{
+#endif
+	short chan;
+	HT_EXTCHNL_OFFSET chan_offset=0;
+	HT_CHANNEL_WIDTH bandwidth=0;
+	int b40M = 0;
+	static int count = 0;
+	chan = ieee->current_network.channel;
+	netif_carrier_off(ieee->dev);
+
+	if (ieee->data_hard_stop)
+		ieee->data_hard_stop(ieee->dev);
+
+	ieee80211_stop_send_beacons(ieee);
+
+	ieee->state = IEEE80211_LINKED_SCANNING;
+	ieee->link_change(ieee->dev);
+#ifndef RTL8192SE
+	ieee->InitialGainHandler(ieee->dev,IG_Backup);
+#endif
+#if(RTL8192S_DISABLE_FW_DM == 0)
+	if (ieee->SetFwCmdHandler)
+	{
+		ieee->SetFwCmdHandler(ieee->dev, FW_CMD_DIG_HALT);
+		ieee->SetFwCmdHandler(ieee->dev, FW_CMD_HIGH_PWR_DISABLE);
+	}
+#endif
+	if (ieee->pHTInfo->bCurrentHTSupport && ieee->pHTInfo->bEnableHT && ieee->pHTInfo->bCurBW40MHz) {
+		b40M = 1;
+		chan_offset = ieee->pHTInfo->CurSTAExtChnlOffset;
+		bandwidth = (HT_CHANNEL_WIDTH)ieee->pHTInfo->bCurBW40MHz;
+		printk("Scan in 40M, force to 20M first:%d, %d\n", chan_offset, bandwidth);
+		ieee->SetBWModeHandler(ieee->dev, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT);
+		}
+	ieee80211_start_scan_syncro(ieee);
+	if (b40M) {
+		printk("Scan in 20M, back to 40M\n");
+		if (chan_offset == HT_EXTCHNL_OFFSET_UPPER)
+			ieee->set_chan(ieee->dev, chan + 2);
+		else if (chan_offset == HT_EXTCHNL_OFFSET_LOWER)
+			ieee->set_chan(ieee->dev, chan - 2);
+		else
+			ieee->set_chan(ieee->dev, chan);
+		ieee->SetBWModeHandler(ieee->dev, bandwidth, chan_offset);
+	} else {
+		ieee->set_chan(ieee->dev, chan);
+	}
+
+#ifndef RTL8192SE
+	ieee->InitialGainHandler(ieee->dev,IG_Restore);
+#endif
+#if(RTL8192S_DISABLE_FW_DM == 0)
+	if (ieee->SetFwCmdHandler)
+	{
+		ieee->SetFwCmdHandler(ieee->dev, FW_CMD_DIG_RESUME);
+		ieee->SetFwCmdHandler(ieee->dev, FW_CMD_HIGH_PWR_ENABLE);
+	}
+#endif
+	ieee->state = IEEE80211_LINKED;
+	ieee->link_change(ieee->dev);
+	// To prevent the immediately calling watch_dog after scan.
+	if(ieee->LinkDetectInfo.NumRecvBcnInPeriod==0||ieee->LinkDetectInfo.NumRecvDataInPeriod==0 )
+	{
+		ieee->LinkDetectInfo.NumRecvBcnInPeriod = 1;
+		ieee->LinkDetectInfo.NumRecvDataInPeriod= 1;
+	}
+	if (ieee->data_hard_resume)
+		ieee->data_hard_resume(ieee->dev);
+
+	if(ieee->iw_mode == IW_MODE_ADHOC || ieee->iw_mode == IW_MODE_MASTER)
+		ieee80211_start_send_beacons(ieee);
+
+	netif_carrier_on(ieee->dev);
+	count = 0;
+	up(&ieee->wx_sem);
+
+}
+
+int ieee80211_wx_set_scan(struct ieee80211_device *ieee, struct iw_request_info *a,
+			     union iwreq_data *wrqu, char *b)
+{
+	int ret = 0;
+
+	down(&ieee->wx_sem);
+
+	if (ieee->iw_mode == IW_MODE_MONITOR || !(ieee->proto_started)){
+		ret = -1;
+		goto out;
+	}
+
+	if ( ieee->state == IEEE80211_LINKED){
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+		queue_work(ieee->wq, &ieee->wx_sync_scan_wq);
+#else
+		schedule_task(&ieee->wx_sync_scan_wq);
+#endif
+		/* intentionally forget to up sem */
+		return 0;
+	}
+
+out:
+	up(&ieee->wx_sem);
+	return ret;
+}
+
+int ieee80211_wx_set_essid(struct ieee80211_device *ieee,
+			      struct iw_request_info *a,
+			      union iwreq_data *wrqu, char *extra)
+{
+
+	int ret=0,len;
+	short proto_started;
+	unsigned long flags;
+
+	ieee->sync_scan_hurryup = 1;
+	down(&ieee->wx_sem);
+
+	proto_started = ieee->proto_started;
+
+	if (wrqu->essid.length > IW_ESSID_MAX_SIZE){
+		ret= -E2BIG;
+		goto out;
+	}
+
+	if (ieee->iw_mode == IW_MODE_MONITOR){
+		ret= -1;
+		goto out;
+	}
+
+	if(proto_started)
+		ieee80211_stop_protocol(ieee);
+
+
+	/* this is just to be sure that the GET wx callback
+	 * has consisten infos. not needed otherwise
+	 */
+	spin_lock_irqsave(&ieee->lock, flags);
+
+	if (wrqu->essid.flags && wrqu->essid.length) {
+		//first flush current network.ssid
+		len = ((wrqu->essid.length-1) < IW_ESSID_MAX_SIZE) ? (wrqu->essid.length-1) : IW_ESSID_MAX_SIZE;
+#if LINUX_VERSION_CODE <  KERNEL_VERSION(2,6,20)
+		strncpy(ieee->current_network.ssid, extra, len);
+		ieee->current_network.ssid_len = len;
+#if 0
+		{
+			int i;
+			for (i=0; i<len; i++)
+				printk("%c ", extra[i]);
+			printk("\n");
+		}
+#endif
+#else
+		strncpy(ieee->current_network.ssid, extra, len+1);
+		ieee->current_network.ssid_len = len+1;
+#if 0
+		{
+			int i;
+			for (i=0; i<len + 1; i++)
+				printk("%c ", extra[i]);
+			printk("\n");
+		}
+#endif
+#endif
+		ieee->ssid_set = 1;
+	}
+	else{
+		ieee->ssid_set = 0;
+		ieee->current_network.ssid[0] = '\0';
+		ieee->current_network.ssid_len = 0;
+	}
+	spin_unlock_irqrestore(&ieee->lock, flags);
+
+	if (proto_started)
+		ieee80211_start_protocol(ieee);
+out:
+	up(&ieee->wx_sem);
+	return ret;
+}
+
+ int ieee80211_wx_get_mode(struct ieee80211_device *ieee, struct iw_request_info *a,
+			     union iwreq_data *wrqu, char *b)
+{
+
+	wrqu->mode = ieee->iw_mode;
+	return 0;
+}
+
+ int ieee80211_wx_set_rawtx(struct ieee80211_device *ieee,
+			       struct iw_request_info *info,
+			       union iwreq_data *wrqu, char *extra)
+{
+
+	int *parms = (int *)extra;
+	int enable = (parms[0] > 0);
+	short prev = ieee->raw_tx;
+
+	down(&ieee->wx_sem);
+
+	if(enable)
+		ieee->raw_tx = 1;
+	else
+		ieee->raw_tx = 0;
+
+	printk(KERN_INFO"raw TX is %s\n",
+	      ieee->raw_tx ? "enabled" : "disabled");
+
+	if(ieee->iw_mode == IW_MODE_MONITOR)
+	{
+		if(prev == 0 && ieee->raw_tx){
+			if (ieee->data_hard_resume)
+				ieee->data_hard_resume(ieee->dev);
+
+			netif_carrier_on(ieee->dev);
+		}
+
+		if(prev && ieee->raw_tx == 1)
+			netif_carrier_off(ieee->dev);
+	}
+
+	up(&ieee->wx_sem);
+
+	return 0;
+}
+
+int ieee80211_wx_get_name(struct ieee80211_device *ieee,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra)
+{
+	strcpy(wrqu->name, "802.11");
+	if(ieee->modulation & IEEE80211_CCK_MODULATION){
+		strcat(wrqu->name, "b");
+		if(ieee->modulation & IEEE80211_OFDM_MODULATION)
+			strcat(wrqu->name, "/g");
+	}else if(ieee->modulation & IEEE80211_OFDM_MODULATION)
+		strcat(wrqu->name, "g");
+	if (ieee->mode & (IEEE_N_24G | IEEE_N_5G))
+		strcat(wrqu->name, "/n");
+
+	if((ieee->state == IEEE80211_LINKED) ||
+		(ieee->state == IEEE80211_LINKED_SCANNING))
+		strcat(wrqu->name," linked");
+	else if(ieee->state != IEEE80211_NOLINK)
+		strcat(wrqu->name," link..");
+
+
+	return 0;
+}
+
+
+/* this is mostly stolen from hostap */
+int ieee80211_wx_set_power(struct ieee80211_device *ieee,
+				 struct iw_request_info *info,
+				 union iwreq_data *wrqu, char *extra)
+{
+	int ret = 0;
+#if 1
+	if(
+		(!ieee->sta_wake_up) ||
+	//	(!ieee->ps_request_tx_ack) ||
+		(!ieee->enter_sleep_state) ||
+		(!ieee->ps_is_queue_empty)){
+
+	//	printk("ERROR. PS mode is tryied to be use but driver missed a callback\n\n");
+
+		return -1;
+	}
+#endif
+	down(&ieee->wx_sem);
+
+	if (wrqu->power.disabled){
+		ieee->ps = IEEE80211_PS_DISABLED;
+		goto exit;
+	}
+	if (wrqu->power.flags & IW_POWER_TIMEOUT) {
+		//ieee->ps_period = wrqu->power.value / 1000;
+		ieee->ps_timeout = wrqu->power.value / 1000;
+	}
+
+	if (wrqu->power.flags & IW_POWER_PERIOD) {
+
+		//ieee->ps_timeout = wrqu->power.value / 1000;
+		ieee->ps_period = wrqu->power.value / 1000;
+		//wrq->value / 1024;
+
+	}
+	switch (wrqu->power.flags & IW_POWER_MODE) {
+	case IW_POWER_UNICAST_R:
+		ieee->ps = IEEE80211_PS_UNICAST;
+		break;
+	case IW_POWER_MULTICAST_R:
+		ieee->ps = IEEE80211_PS_MBCAST;
+		break;
+	case IW_POWER_ALL_R:
+		ieee->ps = IEEE80211_PS_UNICAST | IEEE80211_PS_MBCAST;
+		break;
+
+	case IW_POWER_ON:
+	//	ieee->ps = IEEE80211_PS_DISABLED;
+		break;
+
+	default:
+		ret = -EINVAL;
+		goto exit;
+
+	}
+exit:
+	up(&ieee->wx_sem);
+	return ret;
+
+}
+
+/* this is stolen from hostap */
+int ieee80211_wx_get_power(struct ieee80211_device *ieee,
+				 struct iw_request_info *info,
+				 union iwreq_data *wrqu, char *extra)
+{
+	int ret =0;
+
+	down(&ieee->wx_sem);
+
+	if(ieee->ps == IEEE80211_PS_DISABLED){
+		wrqu->power.disabled = 1;
+		goto exit;
+	}
+
+	wrqu->power.disabled = 0;
+
+	if ((wrqu->power.flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) {
+		wrqu->power.flags = IW_POWER_TIMEOUT;
+		wrqu->power.value = ieee->ps_timeout * 1000;
+	} else {
+//		ret = -EOPNOTSUPP;
+//		goto exit;
+		wrqu->power.flags = IW_POWER_PERIOD;
+		wrqu->power.value = ieee->ps_period * 1000;
+//ieee->current_network.dtim_period * ieee->current_network.beacon_interval * 1024;
+	}
+
+       if ((ieee->ps & (IEEE80211_PS_MBCAST | IEEE80211_PS_UNICAST)) == (IEEE80211_PS_MBCAST | IEEE80211_PS_UNICAST))
+	   	wrqu->power.flags |= IW_POWER_ALL_R;
+	else if (ieee->ps & IEEE80211_PS_MBCAST)
+		wrqu->power.flags |= IW_POWER_MULTICAST_R;
+	else
+		wrqu->power.flags |= IW_POWER_UNICAST_R;
+
+exit:
+	up(&ieee->wx_sem);
+	return ret;
+
+}
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+EXPORT_SYMBOL(ieee80211_wx_get_essid);
+EXPORT_SYMBOL(ieee80211_wx_set_essid);
+EXPORT_SYMBOL(ieee80211_wx_set_rate);
+EXPORT_SYMBOL(ieee80211_wx_get_rate);
+EXPORT_SYMBOL(ieee80211_wx_set_wap);
+EXPORT_SYMBOL(ieee80211_wx_get_wap);
+EXPORT_SYMBOL(ieee80211_wx_set_mode);
+EXPORT_SYMBOL(ieee80211_wx_get_mode);
+EXPORT_SYMBOL(ieee80211_wx_set_scan);
+EXPORT_SYMBOL(ieee80211_wx_get_freq);
+EXPORT_SYMBOL(ieee80211_wx_set_freq);
+EXPORT_SYMBOL(ieee80211_wx_set_rawtx);
+EXPORT_SYMBOL(ieee80211_wx_get_name);
+EXPORT_SYMBOL(ieee80211_wx_set_power);
+EXPORT_SYMBOL(ieee80211_wx_get_power);
+EXPORT_SYMBOL(ieee80211_wlan_frequencies);
+EXPORT_SYMBOL(ieee80211_wx_set_rts);
+EXPORT_SYMBOL(ieee80211_wx_get_rts);
+#else
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_essid);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_essid);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_rate);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_rate);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_wap);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_wap);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_mode);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_mode);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_scan);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_freq);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_freq);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_rawtx);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_name);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_power);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_power);
+EXPORT_SYMBOL_NOVERS(ieee80211_wlan_frequencies);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_rts);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_rts);
+#endif
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c
new file mode 100644
index 00000000000..7294572b990
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c
@@ -0,0 +1,947 @@
+/******************************************************************************
+
+  Copyright(c) 2003 - 2004 Intel Corporation. All rights reserved.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms of version 2 of the GNU General Public License as
+  published by the Free Software Foundation.
+
+  This program is distributed in the hope that it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc., 59
+  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+
+  The full GNU General Public License is included in this distribution in the
+  file called LICENSE.
+
+  Contact Information:
+  James P. Ketrenos <ipw2100-admin@linux.intel.com>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+******************************************************************************
+
+  Few modifications for Realtek's Wi-Fi drivers by
+  Andrea Merello <andreamrl@tiscali.it>
+
+  A special thanks goes to Realtek for their support !
+
+******************************************************************************/
+
+#include <linux/compiler.h>
+//#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/if_arp.h>
+#include <linux/in6.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/proc_fs.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/tcp.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/wireless.h>
+#include <linux/etherdevice.h>
+#include <asm/uaccess.h>
+#include <linux/if_vlan.h>
+
+#include "ieee80211.h"
+
+
+/*
+
+
+802.11 Data Frame
+
+
+802.11 frame_contorl for data frames - 2 bytes
+     ,-----------------------------------------------------------------------------------------.
+bits | 0  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  a  |  b  |  c  |  d  |  e   |
+     |----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|------|
+val  | 0  |  0  |  0  |  1  |  x  |  0  |  0  |  0  |  1  |  0  |  x  |  x  |  x  |  x  |  x   |
+     |----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|------|
+desc | ^-ver-^  |  ^type-^  |  ^-----subtype-----^  | to  |from |more |retry| pwr |more |wep   |
+     |          |           | x=0 data,x=1 data+ack | DS  | DS  |frag |     | mgm |data |      |
+     '-----------------------------------------------------------------------------------------'
+		                                    /\
+                                                    |
+802.11 Data Frame                                   |
+           ,--------- 'ctrl' expands to >-----------'
+          |
+      ,--'---,-------------------------------------------------------------.
+Bytes |  2   |  2   |    6    |    6    |    6    |  2   | 0..2312 |   4  |
+      |------|------|---------|---------|---------|------|---------|------|
+Desc. | ctrl | dura |  DA/RA  |   TA    |    SA   | Sequ |  Frame  |  fcs |
+      |      | tion | (BSSID) |         |         | ence |  data   |      |
+      `--------------------------------------------------|         |------'
+Total: 28 non-data bytes                                 `----.----'
+                                                              |
+       .- 'Frame data' expands to <---------------------------'
+       |
+       V
+      ,---------------------------------------------------.
+Bytes |  1   |  1   |    1    |    3     |  2   |  0-2304 |
+      |------|------|---------|----------|------|---------|
+Desc. | SNAP | SNAP | Control |Eth Tunnel| Type | IP      |
+      | DSAP | SSAP |         |          |      | Packet  |
+      | 0xAA | 0xAA |0x03 (UI)|0x00-00-F8|      |         |
+      `-----------------------------------------|         |
+Total: 8 non-data bytes                         `----.----'
+                                                     |
+       .- 'IP Packet' expands, if WEP enabled, to <--'
+       |
+       V
+      ,-----------------------.
+Bytes |  4  |   0-2296  |  4  |
+      |-----|-----------|-----|
+Desc. | IV  | Encrypted | ICV |
+      |     | IP Packet |     |
+      `-----------------------'
+Total: 8 non-data bytes
+
+
+802.3 Ethernet Data Frame
+
+      ,-----------------------------------------.
+Bytes |   6   |   6   |  2   |  Variable |   4  |
+      |-------|-------|------|-----------|------|
+Desc. | Dest. | Source| Type | IP Packet |  fcs |
+      |  MAC  |  MAC  |      |           |      |
+      `-----------------------------------------'
+Total: 18 non-data bytes
+
+In the event that fragmentation is required, the incoming payload is split into
+N parts of size ieee->fts.  The first fragment contains the SNAP header and the
+remaining packets are just data.
+
+If encryption is enabled, each fragment payload size is reduced by enough space
+to add the prefix and postfix (IV and ICV totalling 8 bytes in the case of WEP)
+So if you have 1500 bytes of payload with ieee->fts set to 500 without
+encryption it will take 3 frames.  With WEP it will take 4 frames as the
+payload of each frame is reduced to 492 bytes.
+
+* SKB visualization
+*
+*  ,- skb->data
+* |
+* |    ETHERNET HEADER        ,-<-- PAYLOAD
+* |                           |     14 bytes from skb->data
+* |  2 bytes for Type --> ,T. |     (sizeof ethhdr)
+* |                       | | |
+* |,-Dest.--. ,--Src.---. | | |
+* |  6 bytes| | 6 bytes | | | |
+* v         | |         | | | |
+* 0         | v       1 | v | v           2
+* 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5
+*     ^     | ^         | ^ |
+*     |     | |         | | |
+*     |     | |         | `T' <---- 2 bytes for Type
+*     |     | |         |
+*     |     | '---SNAP--' <-------- 6 bytes for SNAP
+*     |     |
+*     `-IV--' <-------------------- 4 bytes for IV (WEP)
+*
+*      SNAP HEADER
+*
+*/
+
+static u8 P802_1H_OUI[P80211_OUI_LEN] = { 0x00, 0x00, 0xf8 };
+static u8 RFC1042_OUI[P80211_OUI_LEN] = { 0x00, 0x00, 0x00 };
+
+static inline int ieee80211_put_snap(u8 *data, u16 h_proto)
+{
+	struct ieee80211_snap_hdr *snap;
+	u8 *oui;
+
+	snap = (struct ieee80211_snap_hdr *)data;
+	snap->dsap = 0xaa;
+	snap->ssap = 0xaa;
+	snap->ctrl = 0x03;
+
+	if (h_proto == 0x8137 || h_proto == 0x80f3)
+		oui = P802_1H_OUI;
+	else
+		oui = RFC1042_OUI;
+	snap->oui[0] = oui[0];
+	snap->oui[1] = oui[1];
+	snap->oui[2] = oui[2];
+
+	*(u16 *)(data + SNAP_SIZE) = htons(h_proto);
+
+	return SNAP_SIZE + sizeof(u16);
+}
+
+int ieee80211_encrypt_fragment(
+	struct ieee80211_device *ieee,
+	struct sk_buff *frag,
+	int hdr_len)
+{
+	struct ieee80211_crypt_data* crypt = ieee->crypt[ieee->tx_keyidx];
+	int res;
+
+	if (!(crypt && crypt->ops))
+	{
+		printk("=========>%s(), crypt is null\n", __FUNCTION__);
+		return -1;
+	}
+#ifdef CONFIG_IEEE80211_CRYPT_TKIP
+	struct ieee80211_hdr *header;
+
+	if (ieee->tkip_countermeasures &&
+	    crypt && crypt->ops && strcmp(crypt->ops->name, "TKIP") == 0) {
+		header = (struct ieee80211_hdr *) frag->data;
+		if (net_ratelimit()) {
+			printk(KERN_DEBUG "%s: TKIP countermeasures: dropped "
+			       "TX packet to " MAC_FMT "\n",
+			       ieee->dev->name, MAC_ARG(header->addr1));
+		}
+		return -1;
+	}
+#endif
+	/* To encrypt, frame format is:
+	 * IV (4 bytes), clear payload (including SNAP), ICV (4 bytes) */
+
+	// PR: FIXME: Copied from hostap. Check fragmentation/MSDU/MPDU encryption.
+	/* Host-based IEEE 802.11 fragmentation for TX is not yet supported, so
+	 * call both MSDU and MPDU encryption functions from here. */
+	atomic_inc(&crypt->refcnt);
+	res = 0;
+	if (crypt->ops->encrypt_msdu)
+		res = crypt->ops->encrypt_msdu(frag, hdr_len, crypt->priv);
+	if (res == 0 && crypt->ops->encrypt_mpdu)
+		res = crypt->ops->encrypt_mpdu(frag, hdr_len, crypt->priv);
+
+	atomic_dec(&crypt->refcnt);
+	if (res < 0) {
+		printk(KERN_INFO "%s: Encryption failed: len=%d.\n",
+		       ieee->dev->name, frag->len);
+		ieee->ieee_stats.tx_discards++;
+		return -1;
+	}
+
+	return 0;
+}
+
+
+void ieee80211_txb_free(struct ieee80211_txb *txb) {
+	//int i;
+	if (unlikely(!txb))
+		return;
+#if 0
+	for (i = 0; i < txb->nr_frags; i++)
+		if (txb->fragments[i])
+			dev_kfree_skb_any(txb->fragments[i]);
+#endif
+	kfree(txb);
+}
+
+struct ieee80211_txb *ieee80211_alloc_txb(int nr_frags, int txb_size,
+					  int gfp_mask)
+{
+	struct ieee80211_txb *txb;
+	int i;
+	txb = kmalloc(
+		sizeof(struct ieee80211_txb) + (sizeof(u8*) * nr_frags),
+		gfp_mask);
+	if (!txb)
+		return NULL;
+
+	memset(txb, 0, sizeof(struct ieee80211_txb));
+	txb->nr_frags = nr_frags;
+	txb->frag_size = txb_size;
+
+	for (i = 0; i < nr_frags; i++) {
+		txb->fragments[i] = dev_alloc_skb(txb_size);
+		if (unlikely(!txb->fragments[i])) {
+			i--;
+			break;
+		}
+		memset(txb->fragments[i]->cb, 0, sizeof(txb->fragments[i]->cb));
+	}
+	if (unlikely(i != nr_frags)) {
+		while (i >= 0)
+			dev_kfree_skb_any(txb->fragments[i--]);
+		kfree(txb);
+		return NULL;
+	}
+	return txb;
+}
+
+// Classify the to-be send data packet
+// Need to acquire the sent queue index.
+static int
+ieee80211_classify(struct sk_buff *skb, struct ieee80211_network *network)
+{
+	struct ethhdr *eth;
+	struct iphdr *ip;
+	eth = (struct ethhdr *)skb->data;
+	if (eth->h_proto != htons(ETH_P_IP))
+		return 0;
+
+//	IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, skb->data, skb->len);
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,22))
+	ip = ip_hdr(skb);
+#else
+	ip = (struct iphdr*)(skb->data + sizeof(struct ether_header));
+#endif
+	switch (ip->tos & 0xfc) {
+		case 0x20:
+			return 2;
+		case 0x40:
+			return 1;
+		case 0x60:
+			return 3;
+		case 0x80:
+			return 4;
+		case 0xa0:
+			return 5;
+		case 0xc0:
+			return 6;
+		case 0xe0:
+			return 7;
+		default:
+			return 0;
+	}
+}
+
+#define SN_LESS(a, b)		(((a-b)&0x800)!=0)
+void ieee80211_tx_query_agg_cap(struct ieee80211_device* ieee, struct sk_buff* skb, cb_desc* tcb_desc)
+{
+	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
+	PTX_TS_RECORD			pTxTs = NULL;
+	struct ieee80211_hdr_1addr* hdr = (struct ieee80211_hdr_1addr*)skb->data;
+
+	if (!pHTInfo->bCurrentHTSupport||!pHTInfo->bEnableHT)
+		return;
+	if (!IsQoSDataFrame(skb->data))
+		return;
+
+	if (is_multicast_ether_addr(hdr->addr1) || is_broadcast_ether_addr(hdr->addr1))
+		return;
+	//check packet and mode later
+#ifdef TO_DO_LIST
+	if(pTcb->PacketLength >= 4096)
+		return;
+	// For RTL819X, if pairwisekey = wep/tkip, we don't aggrregation.
+	if(!Adapter->HalFunc.GetNmodeSupportBySecCfgHandler(Adapter))
+		return;
+#endif
+
+	if(pHTInfo->IOTAction & HT_IOT_ACT_TX_NO_AGGREGATION)
+		return;
+
+#if 1
+	if(!ieee->GetNmodeSupportBySecCfg(ieee->dev))
+	{
+		return;
+	}
+#endif
+	if(pHTInfo->bCurrentAMPDUEnable)
+	{
+		if (!GetTs(ieee, (PTS_COMMON_INFO*)(&pTxTs), hdr->addr1, skb->priority, TX_DIR, true))
+		{
+			printk("===>can't get TS\n");
+			return;
+		}
+		if (pTxTs->TxAdmittedBARecord.bValid == false)
+		{
+			//as some AP will refuse our action frame until key handshake has been finished. WB
+			if (ieee->wpa_ie_len && (ieee->pairwise_key_type == KEY_TYPE_NA))
+			;
+			else
+			TsStartAddBaProcess(ieee, pTxTs);
+			goto FORCED_AGG_SETTING;
+		}
+		else if (pTxTs->bUsingBa == false)
+		{
+			if (SN_LESS(pTxTs->TxAdmittedBARecord.BaStartSeqCtrl.field.SeqNum, (pTxTs->TxCurSeq+1)%4096))
+				pTxTs->bUsingBa = true;
+			else
+				goto FORCED_AGG_SETTING;
+		}
+
+		if (ieee->iw_mode == IW_MODE_INFRA)
+		{
+			tcb_desc->bAMPDUEnable = true;
+			tcb_desc->ampdu_factor = pHTInfo->CurrentAMPDUFactor;
+			tcb_desc->ampdu_density = pHTInfo->CurrentMPDUDensity;
+		}
+	}
+FORCED_AGG_SETTING:
+	switch(pHTInfo->ForcedAMPDUMode )
+	{
+		case HT_AGG_AUTO:
+			break;
+
+		case HT_AGG_FORCE_ENABLE:
+			tcb_desc->bAMPDUEnable = true;
+			tcb_desc->ampdu_density = pHTInfo->ForcedMPDUDensity;
+			tcb_desc->ampdu_factor = pHTInfo->ForcedAMPDUFactor;
+			break;
+
+		case HT_AGG_FORCE_DISABLE:
+			tcb_desc->bAMPDUEnable = false;
+			tcb_desc->ampdu_density = 0;
+			tcb_desc->ampdu_factor = 0;
+			break;
+
+	}
+		return;
+}
+
+extern void ieee80211_qurey_ShortPreambleMode(struct ieee80211_device* ieee, cb_desc* tcb_desc)
+{
+	tcb_desc->bUseShortPreamble = false;
+	if (tcb_desc->data_rate == 2)
+	{//// 1M can only use Long Preamble. 11B spec
+		return;
+	}
+	else if (ieee->current_network.capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
+	{
+		tcb_desc->bUseShortPreamble = true;
+	}
+	return;
+}
+extern	void
+ieee80211_query_HTCapShortGI(struct ieee80211_device *ieee, cb_desc *tcb_desc)
+{
+	PRT_HIGH_THROUGHPUT		pHTInfo = ieee->pHTInfo;
+
+	tcb_desc->bUseShortGI 		= false;
+
+	if(!pHTInfo->bCurrentHTSupport||!pHTInfo->bEnableHT)
+		return;
+
+	if(pHTInfo->bForcedShortGI)
+	{
+		tcb_desc->bUseShortGI = true;
+		return;
+	}
+
+	if((pHTInfo->bCurBW40MHz==true) && pHTInfo->bCurShortGI40MHz)
+		tcb_desc->bUseShortGI = true;
+	else if((pHTInfo->bCurBW40MHz==false) && pHTInfo->bCurShortGI20MHz)
+		tcb_desc->bUseShortGI = true;
+}
+
+void ieee80211_query_BandwidthMode(struct ieee80211_device* ieee, cb_desc *tcb_desc)
+{
+	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
+
+	tcb_desc->bPacketBW = false;
+
+	if(!pHTInfo->bCurrentHTSupport||!pHTInfo->bEnableHT)
+		return;
+
+	if(tcb_desc->bMulticast || tcb_desc->bBroadcast)
+		return;
+
+	if((tcb_desc->data_rate & 0x80)==0) // If using legacy rate, it shall use 20MHz channel.
+		return;
+	//BandWidthAutoSwitch is for auto switch to 20 or 40 in long distance
+	if(pHTInfo->bCurBW40MHz && pHTInfo->bCurTxBW40MHz && !ieee->bandwidth_auto_switch.bforced_tx20Mhz)
+		tcb_desc->bPacketBW = true;
+	return;
+}
+
+void ieee80211_query_protectionmode(struct ieee80211_device* ieee, cb_desc* tcb_desc, struct sk_buff* skb)
+{
+	// Common Settings
+	tcb_desc->bRTSSTBC			= false;
+	tcb_desc->bRTSUseShortGI		= false; // Since protection frames are always sent by legacy rate, ShortGI will never be used.
+	tcb_desc->bCTSEnable			= false; // Most of protection using RTS/CTS
+	tcb_desc->RTSSC				= 0;		// 20MHz: Don't care;  40MHz: Duplicate.
+	tcb_desc->bRTSBW			= false; // RTS frame bandwidth is always 20MHz
+
+	if(tcb_desc->bBroadcast || tcb_desc->bMulticast)//only unicast frame will use rts/cts
+		return;
+
+	if (is_broadcast_ether_addr(skb->data+16))  //check addr3 as infrastructure add3 is DA.
+		return;
+
+	if (ieee->mode < IEEE_N_24G) //b, g mode
+	{
+			// (1) RTS_Threshold is compared to the MPDU, not MSDU.
+			// (2) If there are more than one frag in  this MSDU, only the first frag uses protection frame.
+			//		Other fragments are protected by previous fragment.
+			//		So we only need to check the length of first fragment.
+		if (skb->len > ieee->rts)
+		{
+			tcb_desc->bRTSEnable = true;
+			tcb_desc->rts_rate = MGN_24M;
+		}
+		else if (ieee->current_network.buseprotection)
+		{
+			// Use CTS-to-SELF in protection mode.
+			tcb_desc->bRTSEnable = true;
+			tcb_desc->bCTSEnable = true;
+			tcb_desc->rts_rate = MGN_24M;
+		}
+		//otherwise return;
+		return;
+	}
+	else
+	{// 11n High throughput case.
+		PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
+		while (true)
+		{
+			//check IOT action
+			if(pHTInfo->IOTAction & HT_IOT_ACT_FORCED_CTS2SELF)
+			{
+				tcb_desc->bCTSEnable	= true;
+				tcb_desc->rts_rate  = 	MGN_24M;
+#if defined(RTL8192SE) || defined(RTL8192SU)
+				tcb_desc->bRTSEnable = false;
+#else
+				tcb_desc->bRTSEnable = true;
+#endif
+				break;
+			}
+			else if(pHTInfo->IOTAction & (HT_IOT_ACT_FORCED_RTS|HT_IOT_ACT_PURE_N_MODE))
+			{
+				tcb_desc->bRTSEnable = true;
+				tcb_desc->rts_rate  = 	MGN_24M;
+				break;
+			}
+			//check ERP protection
+			if (ieee->current_network.buseprotection)
+			{// CTS-to-SELF
+				tcb_desc->bRTSEnable = true;
+				tcb_desc->bCTSEnable = true;
+				tcb_desc->rts_rate = MGN_24M;
+				break;
+			}
+			//check HT op mode
+			if(pHTInfo->bCurrentHTSupport  && pHTInfo->bEnableHT)
+			{
+				u8 HTOpMode = pHTInfo->CurrentOpMode;
+				if((pHTInfo->bCurBW40MHz && (HTOpMode == 2 || HTOpMode == 3)) ||
+							(!pHTInfo->bCurBW40MHz && HTOpMode == 3) )
+				{
+					tcb_desc->rts_rate = MGN_24M; // Rate is 24Mbps.
+					tcb_desc->bRTSEnable = true;
+					break;
+				}
+			}
+			//check rts
+			if (skb->len > ieee->rts)
+			{
+				tcb_desc->rts_rate = MGN_24M; // Rate is 24Mbps.
+				tcb_desc->bRTSEnable = true;
+				break;
+			}
+			//to do list: check MIMO power save condition.
+			//check AMPDU aggregation for TXOP
+			if(tcb_desc->bAMPDUEnable)
+			{
+				tcb_desc->rts_rate = MGN_24M; // Rate is 24Mbps.
+				// According to 8190 design, firmware sends CF-End only if RTS/CTS is enabled. However, it degrads
+				// throughput around 10M, so we disable of this mechanism. 2007.08.03 by Emily
+				tcb_desc->bRTSEnable = false;
+				break;
+			}
+			// Totally no protection case!!
+			goto NO_PROTECTION;
+		}
+		}
+	// For test , CTS replace with RTS
+	if( 0 )
+	{
+		tcb_desc->bCTSEnable	= true;
+		tcb_desc->rts_rate = MGN_24M;
+		tcb_desc->bRTSEnable 	= true;
+	}
+	if (ieee->current_network.capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
+		tcb_desc->bUseShortPreamble = true;
+	if (ieee->mode == IW_MODE_MASTER)
+			goto NO_PROTECTION;
+	return;
+NO_PROTECTION:
+	tcb_desc->bRTSEnable	= false;
+	tcb_desc->bCTSEnable	= false;
+	tcb_desc->rts_rate		= 0;
+	tcb_desc->RTSSC		= 0;
+	tcb_desc->bRTSBW		= false;
+}
+
+
+void ieee80211_txrate_selectmode(struct ieee80211_device* ieee, cb_desc* tcb_desc)
+{
+#ifdef TO_DO_LIST
+	if(!IsDataFrame(pFrame))
+	{
+		pTcb->bTxDisableRateFallBack = TRUE;
+		pTcb->bTxUseDriverAssingedRate = TRUE;
+		pTcb->RATRIndex = 7;
+		return;
+	}
+
+	if(pMgntInfo->ForcedDataRate!= 0)
+	{
+		pTcb->bTxDisableRateFallBack = TRUE;
+		pTcb->bTxUseDriverAssingedRate = TRUE;
+		return;
+	}
+#endif
+	if(ieee->bTxDisableRateFallBack)
+		tcb_desc->bTxDisableRateFallBack = true;
+
+	if(ieee->bTxUseDriverAssingedRate)
+		tcb_desc->bTxUseDriverAssingedRate = true;
+	if(!tcb_desc->bTxDisableRateFallBack || !tcb_desc->bTxUseDriverAssingedRate)
+	{
+		if (ieee->iw_mode == IW_MODE_INFRA || ieee->iw_mode == IW_MODE_ADHOC)
+			tcb_desc->RATRIndex = 0;
+	}
+}
+
+void ieee80211_query_seqnum(struct ieee80211_device*ieee, struct sk_buff* skb, u8* dst)
+{
+	if (is_multicast_ether_addr(dst) || is_broadcast_ether_addr(dst))
+		return;
+	if (IsQoSDataFrame(skb->data)) //we deal qos data only
+	{
+		PTX_TS_RECORD pTS = NULL;
+		if (!GetTs(ieee, (PTS_COMMON_INFO*)(&pTS), dst, skb->priority, TX_DIR, true))
+		{
+			return;
+		}
+		pTS->TxCurSeq = (pTS->TxCurSeq+1)%4096;
+	}
+}
+
+int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0))
+	struct ieee80211_device *ieee = netdev_priv(dev);
+#else
+	struct ieee80211_device *ieee = (struct ieee80211_device *)dev->priv;
+#endif
+	struct ieee80211_txb *txb = NULL;
+	struct ieee80211_hdr_3addrqos *frag_hdr;
+	int i, bytes_per_frag, nr_frags, bytes_last_frag, frag_size;
+	unsigned long flags;
+	struct net_device_stats *stats = &ieee->stats;
+	int ether_type = 0, encrypt;
+	int bytes, fc, qos_ctl = 0, hdr_len;
+	struct sk_buff *skb_frag;
+	struct ieee80211_hdr_3addrqos header = { /* Ensure zero initialized */
+		.duration_id = 0,
+		.seq_ctl = 0,
+		.qos_ctl = 0
+	};
+	u8 dest[ETH_ALEN], src[ETH_ALEN];
+	int qos_actived = ieee->current_network.qos_data.active;
+
+	struct ieee80211_crypt_data* crypt;
+
+	cb_desc *tcb_desc;
+
+	spin_lock_irqsave(&ieee->lock, flags);
+
+	/* If there is no driver handler to take the TXB, dont' bother
+	 * creating it... */
+	if ((!ieee->hard_start_xmit && !(ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE))||
+	   ((!ieee->softmac_data_hard_start_xmit && (ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE)))) {
+		printk(KERN_WARNING "%s: No xmit handler.\n",
+		       ieee->dev->name);
+		goto success;
+	}
+
+
+	if(likely(ieee->raw_tx == 0)){
+		if (unlikely(skb->len < SNAP_SIZE + sizeof(u16))) {
+			printk(KERN_WARNING "%s: skb too small (%d).\n",
+			ieee->dev->name, skb->len);
+			goto success;
+		}
+
+		memset(skb->cb, 0, sizeof(skb->cb));
+		ether_type = ntohs(((struct ethhdr *)skb->data)->h_proto);
+
+		crypt = ieee->crypt[ieee->tx_keyidx];
+
+		encrypt = !(ether_type == ETH_P_PAE && ieee->ieee802_1x) &&
+			ieee->host_encrypt && crypt && crypt->ops;
+
+		if (!encrypt && ieee->ieee802_1x &&
+		ieee->drop_unencrypted && ether_type != ETH_P_PAE) {
+			stats->tx_dropped++;
+			goto success;
+		}
+	#ifdef CONFIG_IEEE80211_DEBUG
+		if (crypt && !encrypt && ether_type == ETH_P_PAE) {
+			struct eapol *eap = (struct eapol *)(skb->data +
+				sizeof(struct ethhdr) - SNAP_SIZE - sizeof(u16));
+			IEEE80211_DEBUG_EAP("TX: IEEE 802.11 EAPOL frame: %s\n",
+				eap_get_type(eap->type));
+		}
+	#endif
+
+		/* Save source and destination addresses */
+		memcpy(&dest, skb->data, ETH_ALEN);
+		memcpy(&src, skb->data+ETH_ALEN, ETH_ALEN);
+
+                /* Advance the SKB to the start of the payload */
+                skb_pull(skb, sizeof(struct ethhdr));
+
+                /* Determine total amount of storage required for TXB packets */
+                bytes = skb->len + SNAP_SIZE + sizeof(u16);
+
+		if (encrypt)
+			fc = IEEE80211_FTYPE_DATA | IEEE80211_FCTL_WEP;
+		else
+
+                        fc = IEEE80211_FTYPE_DATA;
+
+		//if(ieee->current_network.QoS_Enable)
+		if(qos_actived)
+			fc |= IEEE80211_STYPE_QOS_DATA;
+		else
+			fc |= IEEE80211_STYPE_DATA;
+
+		if (ieee->iw_mode == IW_MODE_INFRA) {
+			fc |= IEEE80211_FCTL_TODS;
+			/* To DS: Addr1 = BSSID, Addr2 = SA,
+			Addr3 = DA */
+			memcpy(&header.addr1, ieee->current_network.bssid, ETH_ALEN);
+			memcpy(&header.addr2, &src, ETH_ALEN);
+			memcpy(&header.addr3, &dest, ETH_ALEN);
+		} else if (ieee->iw_mode == IW_MODE_ADHOC) {
+			/* not From/To DS: Addr1 = DA, Addr2 = SA,
+			Addr3 = BSSID */
+			memcpy(&header.addr1, dest, ETH_ALEN);
+			memcpy(&header.addr2, src, ETH_ALEN);
+			memcpy(&header.addr3, ieee->current_network.bssid, ETH_ALEN);
+		}
+
+                header.frame_ctl = cpu_to_le16(fc);
+
+		/* Determine fragmentation size based on destination (multicast
+		* and broadcast are not fragmented) */
+		if (is_multicast_ether_addr(header.addr1) ||
+		is_broadcast_ether_addr(header.addr1)) {
+			frag_size = MAX_FRAG_THRESHOLD;
+			qos_ctl |= QOS_CTL_NOTCONTAIN_ACK;
+		}
+		else {
+			frag_size = ieee->fts;//default:392
+			qos_ctl = 0;
+		}
+
+		//if (ieee->current_network.QoS_Enable)
+		if(qos_actived)
+		{
+			hdr_len = IEEE80211_3ADDR_LEN + 2;
+
+			skb->priority = ieee80211_classify(skb, &ieee->current_network);
+			qos_ctl |= skb->priority; //set in the ieee80211_classify
+			header.qos_ctl = cpu_to_le16(qos_ctl & IEEE80211_QOS_TID);
+		} else {
+			hdr_len = IEEE80211_3ADDR_LEN;
+		}
+		/* Determine amount of payload per fragment.  Regardless of if
+		* this stack is providing the full 802.11 header, one will
+		* eventually be affixed to this fragment -- so we must account for
+		* it when determining the amount of payload space. */
+		bytes_per_frag = frag_size - hdr_len;
+		if (ieee->config &
+		(CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS))
+			bytes_per_frag -= IEEE80211_FCS_LEN;
+
+		/* Each fragment may need to have room for encryptiong pre/postfix */
+		if (encrypt)
+			bytes_per_frag -= crypt->ops->extra_prefix_len +
+				crypt->ops->extra_postfix_len;
+
+		/* Number of fragments is the total bytes_per_frag /
+		* payload_per_fragment */
+		nr_frags = bytes / bytes_per_frag;
+		bytes_last_frag = bytes % bytes_per_frag;
+		if (bytes_last_frag)
+			nr_frags++;
+		else
+			bytes_last_frag = bytes_per_frag;
+
+		/* When we allocate the TXB we allocate enough space for the reserve
+		* and full fragment bytes (bytes_per_frag doesn't include prefix,
+		* postfix, header, FCS, etc.) */
+		txb = ieee80211_alloc_txb(nr_frags, frag_size + ieee->tx_headroom, GFP_ATOMIC);
+		if (unlikely(!txb)) {
+			printk(KERN_WARNING "%s: Could not allocate TXB\n",
+			ieee->dev->name);
+			goto failed;
+		}
+		txb->encrypted = encrypt;
+		txb->payload_size = bytes;
+
+		//if (ieee->current_network.QoS_Enable)
+		if(qos_actived)
+		{
+			txb->queue_index = UP2AC(skb->priority);
+		} else {
+			txb->queue_index = WME_AC_BK;;
+		}
+
+
+
+		for (i = 0; i < nr_frags; i++) {
+			skb_frag = txb->fragments[i];
+			tcb_desc = (cb_desc *)(skb_frag->cb + MAX_DEV_ADDR_SIZE);
+			if(qos_actived){
+				skb_frag->priority = skb->priority;//UP2AC(skb->priority);
+				tcb_desc->queue_index =  UP2AC(skb->priority);
+			} else {
+				skb_frag->priority = WME_AC_BK;
+				tcb_desc->queue_index = WME_AC_BK;
+			}
+			skb_reserve(skb_frag, ieee->tx_headroom);
+
+			if (encrypt){
+				if (ieee->hwsec_active)
+					tcb_desc->bHwSec = 1;
+				else
+					tcb_desc->bHwSec = 0;
+				skb_reserve(skb_frag, crypt->ops->extra_prefix_len);
+			}
+			else
+			{
+				tcb_desc->bHwSec = 0;
+			}
+			frag_hdr = (struct ieee80211_hdr_3addrqos *)skb_put(skb_frag, hdr_len);
+			memcpy(frag_hdr, &header, hdr_len);
+
+			/* If this is not the last fragment, then add the MOREFRAGS
+			* bit to the frame control */
+			if (i != nr_frags - 1) {
+				frag_hdr->frame_ctl = cpu_to_le16(
+					fc | IEEE80211_FCTL_MOREFRAGS);
+				bytes = bytes_per_frag;
+
+			} else {
+				/* The last fragment takes the remaining length */
+				bytes = bytes_last_frag;
+			}
+			//if(ieee->current_network.QoS_Enable)
+			if(qos_actived)
+			{
+				// add 1 only indicate to corresponding seq number control 2006/7/12
+				frag_hdr->seq_ctl = cpu_to_le16(ieee->seq_ctrl[UP2AC(skb->priority)+1]<<4 | i);
+			} else {
+				frag_hdr->seq_ctl = cpu_to_le16(ieee->seq_ctrl[0]<<4 | i);
+			}
+
+			/* Put a SNAP header on the first fragment */
+			if (i == 0) {
+				ieee80211_put_snap(
+					skb_put(skb_frag, SNAP_SIZE + sizeof(u16)),
+					ether_type);
+				bytes -= SNAP_SIZE + sizeof(u16);
+			}
+
+			memcpy(skb_put(skb_frag, bytes), skb->data, bytes);
+
+			/* Advance the SKB... */
+			skb_pull(skb, bytes);
+
+			/* Encryption routine will move the header forward in order
+			* to insert the IV between the header and the payload */
+			if (encrypt)
+				ieee80211_encrypt_fragment(ieee, skb_frag, hdr_len);
+			if (ieee->config &
+			(CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS))
+				skb_put(skb_frag, 4);
+		}
+
+		if(qos_actived)
+		{
+		  if (ieee->seq_ctrl[UP2AC(skb->priority) + 1] == 0xFFF)
+			ieee->seq_ctrl[UP2AC(skb->priority) + 1] = 0;
+		  else
+			ieee->seq_ctrl[UP2AC(skb->priority) + 1]++;
+		} else {
+  		  if (ieee->seq_ctrl[0] == 0xFFF)
+			ieee->seq_ctrl[0] = 0;
+		  else
+			ieee->seq_ctrl[0]++;
+		}
+	}else{
+		if (unlikely(skb->len < sizeof(struct ieee80211_hdr_3addr))) {
+			printk(KERN_WARNING "%s: skb too small (%d).\n",
+			ieee->dev->name, skb->len);
+			goto success;
+		}
+
+		txb = ieee80211_alloc_txb(1, skb->len, GFP_ATOMIC);
+		if(!txb){
+			printk(KERN_WARNING "%s: Could not allocate TXB\n",
+			ieee->dev->name);
+			goto failed;
+		}
+
+		txb->encrypted = 0;
+		txb->payload_size = skb->len;
+		memcpy(skb_put(txb->fragments[0],skb->len), skb->data, skb->len);
+	}
+
+ success:
+//WB add to fill data tcb_desc here. only first fragment is considered, need to change, and you may remove to other place.
+	if (txb)
+	{
+#if 1
+		cb_desc *tcb_desc = (cb_desc *)(txb->fragments[0]->cb + MAX_DEV_ADDR_SIZE);
+		tcb_desc->bTxEnableFwCalcDur = 1;
+		if (is_multicast_ether_addr(header.addr1))
+			tcb_desc->bMulticast = 1;
+		if (is_broadcast_ether_addr(header.addr1))
+			tcb_desc->bBroadcast = 1;
+		ieee80211_txrate_selectmode(ieee, tcb_desc);
+		if ( tcb_desc->bMulticast ||  tcb_desc->bBroadcast)
+			tcb_desc->data_rate = ieee->basic_rate;
+		else
+			//tcb_desc->data_rate = CURRENT_RATE(ieee->current_network.mode, ieee->rate, ieee->HTCurrentOperaRate);
+			tcb_desc->data_rate = CURRENT_RATE(ieee->mode, ieee->rate, ieee->HTCurrentOperaRate);
+		ieee80211_qurey_ShortPreambleMode(ieee, tcb_desc);
+		ieee80211_tx_query_agg_cap(ieee, txb->fragments[0], tcb_desc);
+		ieee80211_query_HTCapShortGI(ieee, tcb_desc);
+		ieee80211_query_BandwidthMode(ieee, tcb_desc);
+		ieee80211_query_protectionmode(ieee, tcb_desc, txb->fragments[0]);
+		ieee80211_query_seqnum(ieee, txb->fragments[0], header.addr1);
+//		IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, txb->fragments[0]->data, txb->fragments[0]->len);
+		//IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, tcb_desc, sizeof(cb_desc));
+#endif
+	}
+	spin_unlock_irqrestore(&ieee->lock, flags);
+	dev_kfree_skb_any(skb);
+	if (txb) {
+		if (ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE){
+			ieee80211_softmac_xmit(txb, ieee);
+		}else{
+			if ((*ieee->hard_start_xmit)(txb, dev) == 0) {
+				stats->tx_packets++;
+				stats->tx_bytes += txb->payload_size;
+				return 0;
+			}
+			ieee80211_txb_free(txb);
+		}
+	}
+
+	return 0;
+
+ failed:
+	spin_unlock_irqrestore(&ieee->lock, flags);
+	netif_stop_queue(dev);
+	stats->tx_errors++;
+	return 1;
+
+}
+
+EXPORT_SYMBOL(ieee80211_txb_free);
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_wx.c
new file mode 100644
index 00000000000..ae11e2576be
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_wx.c
@@ -0,0 +1,1032 @@
+/******************************************************************************
+
+  Copyright(c) 2004 Intel Corporation. All rights reserved.
+
+  Portions of this file are based on the WEP enablement code provided by the
+  Host AP project hostap-drivers v0.1.3
+  Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+  <jkmaline@cc.hut.fi>
+  Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms of version 2 of the GNU General Public License as
+  published by the Free Software Foundation.
+
+  This program is distributed in the hope that it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc., 59
+  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+
+  The full GNU General Public License is included in this distribution in the
+  file called LICENSE.
+
+  Contact Information:
+  James P. Ketrenos <ipw2100-admin@linux.intel.com>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+******************************************************************************/
+#include <linux/wireless.h>
+#include <linux/version.h>
+#include <linux/kmod.h>
+#include <linux/module.h>
+
+#include "ieee80211.h"
+#if 0
+static const char *ieee80211_modes[] = {
+	"?", "a", "b", "ab", "g", "ag", "bg", "abg"
+};
+#endif
+struct modes_unit {
+	char *mode_string;
+	int mode_size;
+};
+struct modes_unit ieee80211_modes[] = {
+	{"a",1},
+	{"b",1},
+	{"g",1},
+	{"?",1},
+	{"N-24G",5},
+	{"N-5G",4},
+};
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,4,20)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
+static inline char *
+iwe_stream_add_event_rsl(char *     stream,         /* Stream of events */
+                     char *     ends,           /* End of stream */
+                     struct iw_event *iwe,      /* Payload */
+                     int        event_len)      /* Real size of payload */
+{
+        /* Check if it's possible */
+        if((stream + event_len) < ends) {
+                iwe->len = event_len;
+		ndelay(1);   //new
+                memcpy(stream, (char *) iwe, event_len);
+                stream += event_len;
+        }
+        return stream;
+}
+#else
+#define iwe_stream_add_event_rsl iwe_stream_add_event
+#endif
+
+#define MAX_CUSTOM_LEN 64
+static inline char *rtl819x_translate_scan(struct ieee80211_device *ieee,
+ 					   char *start, char *stop,
+					   struct ieee80211_network *network,
+                                           struct iw_request_info *info)
+{
+	char custom[MAX_CUSTOM_LEN];
+	char proto_name[IFNAMSIZ];
+	char *pname = proto_name;
+	char *p;
+	struct iw_event iwe;
+	int i, j;
+	u16 max_rate, rate;
+	static u8	EWC11NHTCap[] = {0x00, 0x90, 0x4c, 0x33};
+
+	/* First entry *MUST* be the AP MAC address */
+	iwe.cmd = SIOCGIWAP;
+	iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
+	memcpy(iwe.u.ap_addr.sa_data, network->bssid, ETH_ALEN);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
+	start = iwe_stream_add_event_rsl(info, start, stop, &iwe, IW_EV_ADDR_LEN);
+#else
+	start = iwe_stream_add_event_rsl(start, stop, &iwe, IW_EV_ADDR_LEN);
+#endif
+	/* Remaining entries will be displayed in the order we provide them */
+
+	/* Add the ESSID */
+	iwe.cmd = SIOCGIWESSID;
+	iwe.u.data.flags = 1;
+//	if (network->flags & NETWORK_EMPTY_ESSID) {
+	if (network->ssid_len == 0) {
+		iwe.u.data.length = sizeof("<hidden>");
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
+                start = iwe_stream_add_point(info, start, stop, &iwe, "<hidden>");
+#else
+                start = iwe_stream_add_point(start, stop, &iwe, "<hidden>");
+#endif
+        } else {
+		iwe.u.data.length = min(network->ssid_len, (u8)32);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
+                start = iwe_stream_add_point(info, start, stop, &iwe, network->ssid);
+#else
+                start = iwe_stream_add_point(start, stop, &iwe, network->ssid);
+#endif
+        }
+	/* Add the protocol name */
+	iwe.cmd = SIOCGIWNAME;
+	for(i=0; i<(sizeof(ieee80211_modes)/sizeof(ieee80211_modes[0])); i++) {
+		if(network->mode&(1<<i)) {
+			sprintf(pname,ieee80211_modes[i].mode_string,ieee80211_modes[i].mode_size);
+			pname +=ieee80211_modes[i].mode_size;
+		}
+	}
+	*pname = '\0';
+	snprintf(iwe.u.name, IFNAMSIZ, "IEEE802.11%s", proto_name);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
+        start = iwe_stream_add_event_rsl(info, start, stop, &iwe, IW_EV_CHAR_LEN);
+#else
+        start = iwe_stream_add_event_rsl(start, stop, &iwe, IW_EV_CHAR_LEN);
+#endif
+        /* Add mode */
+        iwe.cmd = SIOCGIWMODE;
+        if (network->capability &
+	    (WLAN_CAPABILITY_BSS | WLAN_CAPABILITY_IBSS)) {
+		if (network->capability & WLAN_CAPABILITY_BSS)
+			iwe.u.mode = IW_MODE_MASTER;
+		else
+			iwe.u.mode = IW_MODE_ADHOC;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
+                start = iwe_stream_add_event_rsl(info, start, stop, &iwe, IW_EV_UINT_LEN);
+#else
+                start = iwe_stream_add_event_rsl(start, stop, &iwe, IW_EV_UINT_LEN);
+#endif
+        }
+
+        /* Add frequency/channel */
+	iwe.cmd = SIOCGIWFREQ;
+/*	iwe.u.freq.m = ieee80211_frequency(network->channel, network->mode);
+	iwe.u.freq.e = 3; */
+	iwe.u.freq.m = network->channel;
+	iwe.u.freq.e = 0;
+	iwe.u.freq.i = 0;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
+        start = iwe_stream_add_event_rsl(info, start, stop, &iwe, IW_EV_FREQ_LEN);
+#else
+        start = iwe_stream_add_event_rsl(start, stop, &iwe, IW_EV_FREQ_LEN);
+#endif
+	/* Add encryption capability */
+	iwe.cmd = SIOCGIWENCODE;
+	if (network->capability & WLAN_CAPABILITY_PRIVACY)
+		iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
+	else
+		iwe.u.data.flags = IW_ENCODE_DISABLED;
+	iwe.u.data.length = 0;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
+        start = iwe_stream_add_point(info, start, stop, &iwe, network->ssid);
+#else
+        start = iwe_stream_add_point(start, stop, &iwe, network->ssid);
+#endif
+	/* Add basic and extended rates */
+	max_rate = 0;
+	p = custom;
+	p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), " Rates (Mb/s): ");
+	for (i = 0, j = 0; i < network->rates_len; ) {
+		if (j < network->rates_ex_len &&
+		    ((network->rates_ex[j] & 0x7F) <
+		     (network->rates[i] & 0x7F)))
+			rate = network->rates_ex[j++] & 0x7F;
+		else
+			rate = network->rates[i++] & 0x7F;
+		if (rate > max_rate)
+			max_rate = rate;
+		p += snprintf(p, MAX_CUSTOM_LEN - (p - custom),
+			      "%d%s ", rate >> 1, (rate & 1) ? ".5" : "");
+	}
+	for (; j < network->rates_ex_len; j++) {
+		rate = network->rates_ex[j] & 0x7F;
+		p += snprintf(p, MAX_CUSTOM_LEN - (p - custom),
+			      "%d%s ", rate >> 1, (rate & 1) ? ".5" : "");
+		if (rate > max_rate)
+			max_rate = rate;
+	}
+
+	if (network->mode >= IEEE_N_24G)//add N rate here;
+	{
+		PHT_CAPABILITY_ELE ht_cap = NULL;
+		bool is40M = false, isShortGI = false;
+		u8 max_mcs = 0;
+		if (!memcmp(network->bssht.bdHTCapBuf, EWC11NHTCap, 4))
+			ht_cap = (PHT_CAPABILITY_ELE)&network->bssht.bdHTCapBuf[4];
+		else
+			ht_cap = (PHT_CAPABILITY_ELE)&network->bssht.bdHTCapBuf[0];
+		is40M = (ht_cap->ChlWidth)?1:0;
+		isShortGI = (ht_cap->ChlWidth)?
+						((ht_cap->ShortGI40Mhz)?1:0):
+						((ht_cap->ShortGI20Mhz)?1:0);
+
+		max_mcs = HTGetHighestMCSRate(ieee, ht_cap->MCS, MCS_FILTER_ALL);
+		rate = MCS_DATA_RATE[is40M][isShortGI][max_mcs&0x7f];
+		if (rate > max_rate)
+			max_rate = rate;
+	}
+#if 0
+	printk("max rate:%d ===basic rate:\n", max_rate);
+	for (i=0;i<network->rates_len;i++)
+		printk(" %x", network->rates[i]);
+	printk("\n=======extend rate\n");
+	for (i=0; i<network->rates_ex_len; i++)
+		printk(" %x", network->rates_ex[i]);
+	printk("\n");
+#endif
+	iwe.cmd = SIOCGIWRATE;
+	iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
+	iwe.u.bitrate.value = max_rate * 500000;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
+        start = iwe_stream_add_event_rsl(info, start, stop, &iwe,
+				     IW_EV_PARAM_LEN);
+#else
+        start = iwe_stream_add_event_rsl(start, stop, &iwe,
+				     IW_EV_PARAM_LEN);
+#endif
+	iwe.cmd = IWEVCUSTOM;
+	iwe.u.data.length = p - custom;
+	if (iwe.u.data.length)
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
+        start = iwe_stream_add_point(info, start, stop, &iwe, custom);
+#else
+        start = iwe_stream_add_point(start, stop, &iwe, custom);
+#endif
+	/* Add quality statistics */
+	/* TODO: Fix these values... */
+	iwe.cmd = IWEVQUAL;
+	iwe.u.qual.qual = network->stats.signal;
+	iwe.u.qual.level = network->stats.rssi;
+	iwe.u.qual.noise = network->stats.noise;
+	iwe.u.qual.updated = network->stats.mask & IEEE80211_STATMASK_WEMASK;
+	if (!(network->stats.mask & IEEE80211_STATMASK_RSSI))
+		iwe.u.qual.updated |= IW_QUAL_LEVEL_INVALID;
+	if (!(network->stats.mask & IEEE80211_STATMASK_NOISE))
+		iwe.u.qual.updated |= IW_QUAL_NOISE_INVALID;
+	if (!(network->stats.mask & IEEE80211_STATMASK_SIGNAL))
+		iwe.u.qual.updated |= IW_QUAL_QUAL_INVALID;
+	iwe.u.qual.updated = 7;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
+        start = iwe_stream_add_event_rsl(info, start, stop, &iwe, IW_EV_QUAL_LEN);
+#else
+        start = iwe_stream_add_event_rsl(start, stop, &iwe, IW_EV_QUAL_LEN);
+#endif
+	iwe.cmd = IWEVCUSTOM;
+	p = custom;
+
+	iwe.u.data.length = p - custom;
+	if (iwe.u.data.length)
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
+            start = iwe_stream_add_point(info, start, stop, &iwe, custom);
+#else
+            start = iwe_stream_add_point(start, stop, &iwe, custom);
+#endif
+#if (WIRELESS_EXT < 18)
+	if (ieee->wpa_enabled && network->wpa_ie_len){
+		char buf[MAX_WPA_IE_LEN * 2 + 30];
+	//	printk("WPA IE\n");
+		u8 *p = buf;
+		p += sprintf(p, "wpa_ie=");
+		for (i = 0; i < network->wpa_ie_len; i++) {
+			p += sprintf(p, "%02x", network->wpa_ie[i]);
+		}
+
+		memset(&iwe, 0, sizeof(iwe));
+		iwe.cmd = IWEVCUSTOM;
+		iwe.u.data.length = strlen(buf);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
+                start = iwe_stream_add_point(info, start, stop, &iwe, buf);
+#else
+                start = iwe_stream_add_point(start, stop, &iwe, buf);
+#endif
+        }
+
+	if (ieee->wpa_enabled && network->rsn_ie_len){
+		char buf[MAX_WPA_IE_LEN * 2 + 30];
+
+		u8 *p = buf;
+		p += sprintf(p, "rsn_ie=");
+		for (i = 0; i < network->rsn_ie_len; i++) {
+			p += sprintf(p, "%02x", network->rsn_ie[i]);
+		}
+
+		memset(&iwe, 0, sizeof(iwe));
+		iwe.cmd = IWEVCUSTOM;
+		iwe.u.data.length = strlen(buf);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
+                start = iwe_stream_add_point(info, start, stop, &iwe, buf);
+#else
+                start = iwe_stream_add_point(start, stop, &iwe, buf);
+#endif
+        }
+#else
+	memset(&iwe, 0, sizeof(iwe));
+	if (network->wpa_ie_len)
+	{
+		char buf[MAX_WPA_IE_LEN];
+		memcpy(buf, network->wpa_ie, network->wpa_ie_len);
+		iwe.cmd = IWEVGENIE;
+		iwe.u.data.length = network->wpa_ie_len;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
+                start = iwe_stream_add_point(info, start, stop, &iwe, buf);
+#else
+                start = iwe_stream_add_point(start, stop, &iwe, buf);
+#endif
+        }
+	memset(&iwe, 0, sizeof(iwe));
+	if (network->rsn_ie_len)
+	{
+		char buf[MAX_WPA_IE_LEN];
+		memcpy(buf, network->rsn_ie, network->rsn_ie_len);
+		iwe.cmd = IWEVGENIE;
+		iwe.u.data.length = network->rsn_ie_len;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
+                start = iwe_stream_add_point(info, start, stop, &iwe, buf);
+#else
+                start = iwe_stream_add_point(start, stop, &iwe, buf);
+#endif
+        }
+#endif
+
+
+	/* Add EXTRA: Age to display seconds since last beacon/probe response
+	 * for given network. */
+	iwe.cmd = IWEVCUSTOM;
+	p = custom;
+	p += snprintf(p, MAX_CUSTOM_LEN - (p - custom),
+		      " Last beacon: %lums ago", (jiffies - network->last_scanned) / (HZ / 100));
+	iwe.u.data.length = p - custom;
+	if (iwe.u.data.length)
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
+            start = iwe_stream_add_point(info, start, stop, &iwe, custom);
+#else
+            start = iwe_stream_add_point(start, stop, &iwe, custom);
+#endif
+
+	return start;
+}
+
+int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
+			  struct iw_request_info *info,
+			  union iwreq_data *wrqu, char *extra)
+{
+	struct ieee80211_network *network;
+	unsigned long flags;
+
+	char *ev = extra;
+//	char *stop = ev + IW_SCAN_MAX_DATA;
+	char *stop = ev + wrqu->data.length;//IW_SCAN_MAX_DATA;
+	//char *stop = ev + IW_SCAN_MAX_DATA;
+	int i = 0;
+	int err = 0;
+	IEEE80211_DEBUG_WX("Getting scan\n");
+	down(&ieee->wx_sem);
+	spin_lock_irqsave(&ieee->lock, flags);
+
+	list_for_each_entry(network, &ieee->network_list, list) {
+		i++;
+		if((stop-ev)<200)
+		{
+			err = -E2BIG;
+			break;
+												}
+		if (ieee->scan_age == 0 ||
+		    time_after(network->last_scanned + ieee->scan_age, jiffies))
+			ev = rtl819x_translate_scan(ieee, ev, stop, network, info);
+		else
+			IEEE80211_DEBUG_SCAN(
+				"Not showing network '%s ("
+				MAC_FMT ")' due to age (%lums).\n",
+				escape_essid(network->ssid,
+					     network->ssid_len),
+				MAC_ARG(network->bssid),
+				(jiffies - network->last_scanned) / (HZ / 100));
+	}
+
+	spin_unlock_irqrestore(&ieee->lock, flags);
+	up(&ieee->wx_sem);
+	wrqu->data.length = ev -  extra;
+	wrqu->data.flags = 0;
+
+	IEEE80211_DEBUG_WX("exit: %d networks returned.\n", i);
+
+	return err;
+}
+
+int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu, char *keybuf)
+{
+	struct iw_point *erq = &(wrqu->encoding);
+	struct net_device *dev = ieee->dev;
+	struct ieee80211_security sec = {
+		.flags = 0
+	};
+	int i, key, key_provided, len;
+	struct ieee80211_crypt_data **crypt;
+
+	IEEE80211_DEBUG_WX("SET_ENCODE\n");
+
+	key = erq->flags & IW_ENCODE_INDEX;
+	if (key) {
+		if (key > WEP_KEYS)
+			return -EINVAL;
+		key--;
+		key_provided = 1;
+	} else {
+		key_provided = 0;
+		key = ieee->tx_keyidx;
+	}
+
+	IEEE80211_DEBUG_WX("Key: %d [%s]\n", key, key_provided ?
+			   "provided" : "default");
+	crypt = &ieee->crypt[key];
+
+	if (erq->flags & IW_ENCODE_DISABLED) {
+		if (key_provided && *crypt) {
+			IEEE80211_DEBUG_WX("Disabling encryption on key %d.\n",
+					   key);
+			ieee80211_crypt_delayed_deinit(ieee, crypt);
+		} else
+			IEEE80211_DEBUG_WX("Disabling encryption.\n");
+
+		/* Check all the keys to see if any are still configured,
+		 * and if no key index was provided, de-init them all */
+		for (i = 0; i < WEP_KEYS; i++) {
+			if (ieee->crypt[i] != NULL) {
+				if (key_provided)
+					break;
+				ieee80211_crypt_delayed_deinit(
+					ieee, &ieee->crypt[i]);
+			}
+		}
+
+		if (i == WEP_KEYS) {
+			sec.enabled = 0;
+			sec.level = SEC_LEVEL_0;
+			sec.flags |= SEC_ENABLED | SEC_LEVEL;
+		}
+
+		goto done;
+	}
+
+
+
+	sec.enabled = 1;
+	sec.flags |= SEC_ENABLED;
+
+	if (*crypt != NULL && (*crypt)->ops != NULL &&
+	    strcmp((*crypt)->ops->name, "WEP") != 0) {
+		/* changing to use WEP; deinit previously used algorithm
+		 * on this key */
+		ieee80211_crypt_delayed_deinit(ieee, crypt);
+	}
+
+	if (*crypt == NULL) {
+		struct ieee80211_crypt_data *new_crypt;
+
+		/* take WEP into use */
+		new_crypt = kmalloc(sizeof(struct ieee80211_crypt_data),
+				    GFP_KERNEL);
+		if (new_crypt == NULL)
+			return -ENOMEM;
+		memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data));
+		new_crypt->ops = ieee80211_get_crypto_ops("WEP");
+		if (!new_crypt->ops) {
+			request_module("ieee80211_crypt_wep");
+			new_crypt->ops = ieee80211_get_crypto_ops("WEP");
+		}
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+		if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
+#else
+		if (new_crypt->ops && try_inc_mod_count(new_crypt->ops->owner))
+#endif
+			new_crypt->priv = new_crypt->ops->init(key);
+
+		if (!new_crypt->ops || !new_crypt->priv) {
+			kfree(new_crypt);
+			new_crypt = NULL;
+
+			printk(KERN_WARNING "%s: could not initialize WEP: "
+			       "load module ieee80211_crypt_wep\n",
+			       dev->name);
+			return -EOPNOTSUPP;
+		}
+		*crypt = new_crypt;
+	}
+
+	/* If a new key was provided, set it up */
+	if (erq->length > 0) {
+		len = erq->length <= 5 ? 5 : 13;
+		memcpy(sec.keys[key], keybuf, erq->length);
+		if (len > erq->length)
+			memset(sec.keys[key] + erq->length, 0,
+			       len - erq->length);
+		IEEE80211_DEBUG_WX("Setting key %d to '%s' (%d:%d bytes)\n",
+				   key, escape_essid(sec.keys[key], len),
+				   erq->length, len);
+		sec.key_sizes[key] = len;
+ 		(*crypt)->ops->set_key(sec.keys[key], len, NULL,
+				       (*crypt)->priv);
+		sec.flags |= (1 << key);
+		/* This ensures a key will be activated if no key is
+		 * explicitely set */
+		if (key == sec.active_key)
+			sec.flags |= SEC_ACTIVE_KEY;
+		ieee->tx_keyidx = key;
+
+	} else {
+		len = (*crypt)->ops->get_key(sec.keys[key], WEP_KEY_LEN,
+					     NULL, (*crypt)->priv);
+		if (len == 0) {
+			/* Set a default key of all 0 */
+			printk("Setting key %d to all zero.\n",
+					   key);
+
+			IEEE80211_DEBUG_WX("Setting key %d to all zero.\n",
+					   key);
+			memset(sec.keys[key], 0, 13);
+			(*crypt)->ops->set_key(sec.keys[key], 13, NULL,
+					       (*crypt)->priv);
+			sec.key_sizes[key] = 13;
+			sec.flags |= (1 << key);
+		}
+
+		/* No key data - just set the default TX key index */
+		if (key_provided) {
+			IEEE80211_DEBUG_WX(
+				"Setting key %d to default Tx key.\n", key);
+			ieee->tx_keyidx = key;
+			sec.active_key = key;
+			sec.flags |= SEC_ACTIVE_KEY;
+		}
+	}
+
+ done:
+	ieee->open_wep = !(erq->flags & IW_ENCODE_RESTRICTED);
+	ieee->auth_mode = ieee->open_wep ? WLAN_AUTH_OPEN : WLAN_AUTH_SHARED_KEY;
+	sec.auth_mode = ieee->open_wep ? WLAN_AUTH_OPEN : WLAN_AUTH_SHARED_KEY;
+	sec.flags |= SEC_AUTH_MODE;
+	IEEE80211_DEBUG_WX("Auth: %s\n", sec.auth_mode == WLAN_AUTH_OPEN ?
+			   "OPEN" : "SHARED KEY");
+
+	/* For now we just support WEP, so only set that security level...
+	 * TODO: When WPA is added this is one place that needs to change */
+	sec.flags |= SEC_LEVEL;
+	sec.level = SEC_LEVEL_1; /* 40 and 104 bit WEP */
+
+	if (ieee->set_security)
+		ieee->set_security(dev, &sec);
+
+	/* Do not reset port if card is in Managed mode since resetting will
+	 * generate new IEEE 802.11 authentication which may end up in looping
+	 * with IEEE 802.1X.  If your hardware requires a reset after WEP
+	 * configuration (for example... Prism2), implement the reset_port in
+	 * the callbacks structures used to initialize the 802.11 stack. */
+	if (ieee->reset_on_keychange &&
+	    ieee->iw_mode != IW_MODE_INFRA &&
+	    ieee->reset_port && ieee->reset_port(dev)) {
+		printk(KERN_DEBUG "%s: reset_port failed\n", dev->name);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+int ieee80211_wx_get_encode(struct ieee80211_device *ieee,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu, char *keybuf)
+{
+	struct iw_point *erq = &(wrqu->encoding);
+	int len, key;
+	struct ieee80211_crypt_data *crypt;
+
+	IEEE80211_DEBUG_WX("GET_ENCODE\n");
+
+	if(ieee->iw_mode == IW_MODE_MONITOR)
+		return -1;
+
+	key = erq->flags & IW_ENCODE_INDEX;
+	if (key) {
+		if (key > WEP_KEYS)
+			return -EINVAL;
+		key--;
+	} else
+		key = ieee->tx_keyidx;
+
+	crypt = ieee->crypt[key];
+	erq->flags = key + 1;
+
+	if (crypt == NULL || crypt->ops == NULL) {
+		erq->length = 0;
+		erq->flags |= IW_ENCODE_DISABLED;
+		return 0;
+	}
+#if 0
+	if (strcmp(crypt->ops->name, "WEP") != 0) {
+		/* only WEP is supported with wireless extensions, so just
+		 * report that encryption is used */
+		erq->length = 0;
+		erq->flags |= IW_ENCODE_ENABLED;
+		return 0;
+	}
+#endif
+	len = crypt->ops->get_key(keybuf, SCM_KEY_LEN, NULL, crypt->priv);
+	erq->length = (len >= 0 ? len : 0);
+
+	erq->flags |= IW_ENCODE_ENABLED;
+
+	if (ieee->open_wep)
+		erq->flags |= IW_ENCODE_OPEN;
+	else
+		erq->flags |= IW_ENCODE_RESTRICTED;
+
+	return 0;
+}
+#if (WIRELESS_EXT >= 18)
+int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
+                               struct iw_request_info *info,
+                               union iwreq_data *wrqu, char *extra)
+{
+	int ret = 0;
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	struct net_device *dev = ieee->dev;
+        struct iw_point *encoding = &wrqu->encoding;
+        struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+        int i, idx;
+        int group_key = 0;
+        const char *alg, *module;
+        struct ieee80211_crypto_ops *ops;
+        struct ieee80211_crypt_data **crypt;
+
+        struct ieee80211_security sec = {
+                .flags = 0,
+        };
+	//printk("======>encoding flag:%x,ext flag:%x, ext alg:%d\n", encoding->flags,ext->ext_flags, ext->alg);
+        idx = encoding->flags & IW_ENCODE_INDEX;
+        if (idx) {
+                if (idx < 1 || idx > WEP_KEYS)
+                        return -EINVAL;
+                idx--;
+        } else
+                idx = ieee->tx_keyidx;
+
+        if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) {
+
+                crypt = &ieee->crypt[idx];
+
+                group_key = 1;
+        } else {
+                /* some Cisco APs use idx>0 for unicast in dynamic WEP */
+		//printk("not group key, flags:%x, ext->alg:%d\n", ext->ext_flags, ext->alg);
+                if (idx != 0 && ext->alg != IW_ENCODE_ALG_WEP)
+                        return -EINVAL;
+                if (ieee->iw_mode == IW_MODE_INFRA)
+
+                        crypt = &ieee->crypt[idx];
+
+                else
+                        return -EINVAL;
+        }
+
+        sec.flags |= SEC_ENABLED;// | SEC_ENCRYPT;
+        if ((encoding->flags & IW_ENCODE_DISABLED) ||
+            ext->alg == IW_ENCODE_ALG_NONE) {
+                if (*crypt)
+                        ieee80211_crypt_delayed_deinit(ieee, crypt);
+
+                for (i = 0; i < WEP_KEYS; i++)
+
+			if (ieee->crypt[i] != NULL)
+
+                                break;
+
+                if (i == WEP_KEYS) {
+                        sec.enabled = 0;
+                      //  sec.encrypt = 0;
+                        sec.level = SEC_LEVEL_0;
+                        sec.flags |= SEC_LEVEL;
+                }
+		//printk("disabled: flag:%x\n", encoding->flags);
+                goto done;
+        }
+
+	sec.enabled = 1;
+    //    sec.encrypt = 1;
+#if 0
+        if (group_key ? !ieee->host_mc_decrypt :
+            !(ieee->host_encrypt || ieee->host_decrypt ||
+              ieee->host_encrypt_msdu))
+                goto skip_host_crypt;
+#endif
+        switch (ext->alg) {
+        case IW_ENCODE_ALG_WEP:
+                alg = "WEP";
+                module = "ieee80211_crypt_wep";
+                break;
+        case IW_ENCODE_ALG_TKIP:
+                alg = "TKIP";
+                module = "ieee80211_crypt_tkip";
+                break;
+        case IW_ENCODE_ALG_CCMP:
+                alg = "CCMP";
+                module = "ieee80211_crypt_ccmp";
+                break;
+        default:
+                IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
+                                   dev->name, ext->alg);
+                ret = -EINVAL;
+                goto done;
+        }
+	printk("alg name:%s\n",alg);
+
+	 ops = ieee80211_get_crypto_ops(alg);
+        if (ops == NULL) {
+                request_module("%s", module);
+                ops = ieee80211_get_crypto_ops(alg);
+        }
+        if (ops == NULL) {
+                IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
+                                   dev->name, ext->alg);
+		printk("========>unknown crypto alg %d\n", ext->alg);
+                ret = -EINVAL;
+                goto done;
+        }
+
+        if (*crypt == NULL || (*crypt)->ops != ops) {
+                struct ieee80211_crypt_data *new_crypt;
+
+                ieee80211_crypt_delayed_deinit(ieee, crypt);
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
+                new_crypt = kzalloc(sizeof(*new_crypt), GFP_KERNEL);
+#else
+                new_crypt = kmalloc(sizeof(*new_crypt), GFP_KERNEL);
+		memset(new_crypt,0,sizeof(*new_crypt));
+#endif
+                if (new_crypt == NULL) {
+                        ret = -ENOMEM;
+                        goto done;
+                }
+                new_crypt->ops = ops;
+                if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
+                        new_crypt->priv = new_crypt->ops->init(idx);
+                if (new_crypt->priv == NULL) {
+                        kfree(new_crypt);
+                        ret = -EINVAL;
+                        goto done;
+                }
+                *crypt = new_crypt;
+
+ 	}
+
+        if (ext->key_len > 0 && (*crypt)->ops->set_key &&
+            (*crypt)->ops->set_key(ext->key, ext->key_len, ext->rx_seq,
+                                   (*crypt)->priv) < 0) {
+                IEEE80211_DEBUG_WX("%s: key setting failed\n", dev->name);
+		printk("key setting failed\n");
+                ret = -EINVAL;
+                goto done;
+        }
+#if 1
+ //skip_host_crypt:
+	//printk("skip_host_crypt:ext_flags:%x\n", ext->ext_flags);
+        if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
+                ieee->tx_keyidx = idx;
+                sec.active_key = idx;
+                sec.flags |= SEC_ACTIVE_KEY;
+        }
+
+        if (ext->alg != IW_ENCODE_ALG_NONE) {
+                //memcpy(sec.keys[idx], ext->key, ext->key_len);
+                sec.key_sizes[idx] = ext->key_len;
+                sec.flags |= (1 << idx);
+                if (ext->alg == IW_ENCODE_ALG_WEP) {
+                      //  sec.encode_alg[idx] = SEC_ALG_WEP;
+                        sec.flags |= SEC_LEVEL;
+                        sec.level = SEC_LEVEL_1;
+                } else if (ext->alg == IW_ENCODE_ALG_TKIP) {
+                      //  sec.encode_alg[idx] = SEC_ALG_TKIP;
+                        sec.flags |= SEC_LEVEL;
+                        sec.level = SEC_LEVEL_2;
+                } else if (ext->alg == IW_ENCODE_ALG_CCMP) {
+                       // sec.encode_alg[idx] = SEC_ALG_CCMP;
+                        sec.flags |= SEC_LEVEL;
+                        sec.level = SEC_LEVEL_3;
+                }
+                /* Don't set sec level for group keys. */
+                if (group_key)
+                        sec.flags &= ~SEC_LEVEL;
+        }
+#endif
+done:
+        if (ieee->set_security)
+                ieee->set_security(ieee->dev, &sec);
+
+	 if (ieee->reset_on_keychange &&
+            ieee->iw_mode != IW_MODE_INFRA &&
+            ieee->reset_port && ieee->reset_port(dev)) {
+                IEEE80211_DEBUG_WX("%s: reset_port failed\n", dev->name);
+                return -EINVAL;
+        }
+#endif
+        return ret;
+}
+
+int ieee80211_wx_get_encode_ext(struct ieee80211_device *ieee,
+			       struct iw_request_info *info,
+			       union iwreq_data *wrqu, char *extra)
+{
+	struct iw_point *encoding = &wrqu->encoding;
+	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+	struct ieee80211_crypt_data *crypt;
+	int idx, max_key_len;
+
+	max_key_len = encoding->length - sizeof(*ext);
+	if (max_key_len < 0)
+		return -EINVAL;
+
+	idx = encoding->flags & IW_ENCODE_INDEX;
+	if (idx) {
+		if (idx < 1 || idx > WEP_KEYS)
+			return -EINVAL;
+		idx--;
+	} else
+		idx = ieee->tx_keyidx;
+
+	if (!(ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) &&
+	    ext->alg != IW_ENCODE_ALG_WEP)
+		if (idx != 0 || ieee->iw_mode != IW_MODE_INFRA)
+			return -EINVAL;
+
+	crypt = ieee->crypt[idx];
+	encoding->flags = idx + 1;
+	memset(ext, 0, sizeof(*ext));
+
+	if (crypt == NULL || crypt->ops == NULL ) {
+		ext->alg = IW_ENCODE_ALG_NONE;
+		ext->key_len = 0;
+		encoding->flags |= IW_ENCODE_DISABLED;
+	} else {
+		if (strcmp(crypt->ops->name, "WEP") == 0 )
+			ext->alg = IW_ENCODE_ALG_WEP;
+		else if (strcmp(crypt->ops->name, "TKIP"))
+			ext->alg = IW_ENCODE_ALG_TKIP;
+		else if (strcmp(crypt->ops->name, "CCMP"))
+			ext->alg = IW_ENCODE_ALG_CCMP;
+		else
+			return -EINVAL;
+		ext->key_len = crypt->ops->get_key(ext->key, SCM_KEY_LEN, NULL, crypt->priv);
+		encoding->flags |= IW_ENCODE_ENABLED;
+		if (ext->key_len &&
+		    (ext->alg == IW_ENCODE_ALG_TKIP ||
+		     ext->alg == IW_ENCODE_ALG_CCMP))
+			ext->ext_flags |= IW_ENCODE_EXT_TX_SEQ_VALID;
+
+	}
+
+	return 0;
+}
+
+int ieee80211_wx_set_mlme(struct ieee80211_device *ieee,
+                               struct iw_request_info *info,
+                               union iwreq_data *wrqu, char *extra)
+{
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	struct iw_mlme *mlme = (struct iw_mlme *) extra;
+	switch (mlme->cmd) {
+        case IW_MLME_DEAUTH:
+	case IW_MLME_DISASSOC:
+		ieee80211_disassociate(ieee);
+		break;
+	 default:
+                return -EOPNOTSUPP;
+        }
+#endif
+	return 0;
+}
+
+int ieee80211_wx_set_auth(struct ieee80211_device *ieee,
+                               struct iw_request_info *info,
+                               struct iw_param *data, char *extra)
+{
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	switch (data->flags & IW_AUTH_INDEX) {
+        case IW_AUTH_WPA_VERSION:
+	     /*need to support wpa2 here*/
+		//printk("wpa version:%x\n", data->value);
+		break;
+        case IW_AUTH_CIPHER_PAIRWISE:
+        case IW_AUTH_CIPHER_GROUP:
+        case IW_AUTH_KEY_MGMT:
+                /*
+ *                  * Host AP driver does not use these parameters and allows
+ *                                   * wpa_supplicant to control them internally.
+ *                                                    */
+                break;
+        case IW_AUTH_TKIP_COUNTERMEASURES:
+                ieee->tkip_countermeasures = data->value;
+                break;
+        case IW_AUTH_DROP_UNENCRYPTED:
+                ieee->drop_unencrypted = data->value;
+		break;
+
+	case IW_AUTH_80211_AUTH_ALG:
+		//printk("======>%s():data->value is %d\n",__FUNCTION__,data->value);
+	//	ieee->open_wep = (data->value&IW_AUTH_ALG_OPEN_SYSTEM)?1:0;
+		if(data->value & IW_AUTH_ALG_SHARED_KEY){
+			ieee->open_wep = 0;
+			ieee->auth_mode = 1;
+		}
+		else if(data->value & IW_AUTH_ALG_OPEN_SYSTEM){
+			ieee->open_wep = 1;
+			ieee->auth_mode = 0;
+		}
+		else if(data->value & IW_AUTH_ALG_LEAP){
+			ieee->open_wep = 1;
+			ieee->auth_mode = 2;
+			//printk("hahahaa:LEAP\n");
+		}
+		else
+			return -EINVAL;
+		//printk("open_wep:%d\n", ieee->open_wep);
+		break;
+
+#if 1
+	case IW_AUTH_WPA_ENABLED:
+		ieee->wpa_enabled = (data->value)?1:0;
+		//printk("enalbe wpa:%d\n", ieee->wpa_enabled);
+		break;
+
+#endif
+	case IW_AUTH_RX_UNENCRYPTED_EAPOL:
+                ieee->ieee802_1x = data->value;
+		break;
+	case IW_AUTH_PRIVACY_INVOKED:
+		ieee->privacy_invoked = data->value;
+		break;
+	default:
+                return -EOPNOTSUPP;
+	}
+#endif
+	return 0;
+}
+#endif
+#if 1
+int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len)
+{
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+#if 0
+	printk("====>%s()\n", __FUNCTION__);
+	{
+		int i;
+		for (i=0; i<len; i++)
+		printk("%2x ", ie[i]&0xff);
+		printk("\n");
+	}
+#endif
+	u8 *buf;
+
+	if (len>MAX_WPA_IE_LEN || (len && ie == NULL))
+	{
+	//	printk("return error out, len:%d\n", len);
+	return -EINVAL;
+	}
+
+
+	if (len)
+	{
+		if (len != ie[1]+2)
+		{
+			printk("len:%d, ie:%d\n", len, ie[1]);
+			return -EINVAL;
+		}
+		buf = kmalloc(len, GFP_KERNEL);
+		if (buf == NULL)
+			return -ENOMEM;
+		memcpy(buf, ie, len);
+		kfree(ieee->wpa_ie);
+		ieee->wpa_ie = buf;
+		ieee->wpa_ie_len = len;
+	}
+	else{
+		if (ieee->wpa_ie)
+		kfree(ieee->wpa_ie);
+		ieee->wpa_ie = NULL;
+		ieee->wpa_ie_len = 0;
+	}
+#endif
+	return 0;
+
+}
+#endif
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+EXPORT_SYMBOL(ieee80211_wx_set_gen_ie);
+#if (WIRELESS_EXT >= 18)
+EXPORT_SYMBOL(ieee80211_wx_set_mlme);
+EXPORT_SYMBOL(ieee80211_wx_set_auth);
+EXPORT_SYMBOL(ieee80211_wx_set_encode_ext);
+EXPORT_SYMBOL(ieee80211_wx_get_encode_ext);
+#endif
+EXPORT_SYMBOL(ieee80211_wx_get_scan);
+EXPORT_SYMBOL(ieee80211_wx_set_encode);
+EXPORT_SYMBOL(ieee80211_wx_get_encode);
+#else
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_gen_ie);
+//EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_mlme);
+//EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_auth);
+//EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_encode_ext);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_scan);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_encode);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_encode);
+#endif
diff --git a/drivers/staging/rtl8192su/ieee80211/internal.h b/drivers/staging/rtl8192su/ieee80211/internal.h
new file mode 100644
index 00000000000..ddc22350d00
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/internal.h
@@ -0,0 +1,115 @@
+/*
+ * Cryptographic API.
+ *
+ * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+#ifndef _CRYPTO_INTERNAL_H
+#define _CRYPTO_INTERNAL_H
+
+
+//#include <linux/crypto.h>
+#include "rtl_crypto.h"
+#include <linux/mm.h>
+#include <linux/highmem.h>
+#include <linux/init.h>
+#include <asm/hardirq.h>
+#include <asm/softirq.h>
+#include <asm/kmap_types.h>
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,20))
+#define list_for_each_entry(pos, head, member)				\
+	for (pos = list_entry((head)->next, typeof(*pos), member),	\
+		     prefetch(pos->member.next);			\
+	     &pos->member != (head); 					\
+	     pos = list_entry(pos->member.next, typeof(*pos), member),	\
+		     prefetch(pos->member.next))
+
+static inline void cond_resched(void)
+{
+	if (need_resched()) {
+		set_current_state(TASK_RUNNING);
+		schedule();
+	}
+}
+#endif
+
+extern enum km_type crypto_km_types[];
+
+static inline enum km_type crypto_kmap_type(int out)
+{
+	return crypto_km_types[(in_softirq() ? 2 : 0) + out];
+}
+
+static inline void *crypto_kmap(struct page *page, int out)
+{
+	return kmap_atomic(page, crypto_kmap_type(out));
+}
+
+static inline void crypto_kunmap(void *vaddr, int out)
+{
+	kunmap_atomic(vaddr, crypto_kmap_type(out));
+}
+
+static inline void crypto_yield(struct crypto_tfm *tfm)
+{
+	if (!in_softirq())
+		cond_resched();
+}
+
+static inline void *crypto_tfm_ctx(struct crypto_tfm *tfm)
+{
+	return (void *)&tfm[1];
+}
+
+struct crypto_alg *crypto_alg_lookup(const char *name);
+
+#ifdef CONFIG_KMOD
+void crypto_alg_autoload(const char *name);
+struct crypto_alg *crypto_alg_mod_lookup(const char *name);
+#else
+static inline struct crypto_alg *crypto_alg_mod_lookup(const char *name)
+{
+	return crypto_alg_lookup(name);
+}
+#endif
+
+#ifdef CONFIG_CRYPTO_HMAC
+int crypto_alloc_hmac_block(struct crypto_tfm *tfm);
+void crypto_free_hmac_block(struct crypto_tfm *tfm);
+#else
+static inline int crypto_alloc_hmac_block(struct crypto_tfm *tfm)
+{
+	return 0;
+}
+
+static inline void crypto_free_hmac_block(struct crypto_tfm *tfm)
+{ }
+#endif
+
+#ifdef CONFIG_PROC_FS
+void __init crypto_init_proc(void);
+#else
+static inline void crypto_init_proc(void)
+{ }
+#endif
+
+int crypto_init_digest_flags(struct crypto_tfm *tfm, u32 flags);
+int crypto_init_cipher_flags(struct crypto_tfm *tfm, u32 flags);
+int crypto_init_compress_flags(struct crypto_tfm *tfm, u32 flags);
+
+int crypto_init_digest_ops(struct crypto_tfm *tfm);
+int crypto_init_cipher_ops(struct crypto_tfm *tfm);
+int crypto_init_compress_ops(struct crypto_tfm *tfm);
+
+void crypto_exit_digest_ops(struct crypto_tfm *tfm);
+void crypto_exit_cipher_ops(struct crypto_tfm *tfm);
+void crypto_exit_compress_ops(struct crypto_tfm *tfm);
+
+#endif	/* _CRYPTO_INTERNAL_H */
+
diff --git a/drivers/staging/rtl8192su/ieee80211/kmap_types.h b/drivers/staging/rtl8192su/ieee80211/kmap_types.h
new file mode 100644
index 00000000000..de67bb01b5f
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/kmap_types.h
@@ -0,0 +1,20 @@
+#ifndef __KMAP_TYPES_H
+
+#define __KMAP_TYPES_H
+
+
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BH_IRQ,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,
+	KM_TYPE_NR
+};
+
+#define _ASM_KMAP_TYPES_H
+
+#endif
diff --git a/drivers/staging/rtl8192su/ieee80211/michael_mic.c b/drivers/staging/rtl8192su/ieee80211/michael_mic.c
new file mode 100644
index 00000000000..df256e487c2
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/michael_mic.c
@@ -0,0 +1,194 @@
+/*
+ * Cryptographic API
+ *
+ * Michael MIC (IEEE 802.11i/TKIP) keyed digest
+ *
+ * Copyright (c) 2004 Jouni Malinen <jkmaline@cc.hut.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/string.h>
+//#include <linux/crypto.h>
+#include "rtl_crypto.h"
+
+
+struct michael_mic_ctx {
+	u8 pending[4];
+	size_t pending_len;
+
+	u32 l, r;
+};
+
+
+static inline u32 rotl(u32 val, int bits)
+{
+	return (val << bits) | (val >> (32 - bits));
+}
+
+
+static inline u32 rotr(u32 val, int bits)
+{
+	return (val >> bits) | (val << (32 - bits));
+}
+
+
+static inline u32 xswap(u32 val)
+{
+	return ((val & 0x00ff00ff) << 8) | ((val & 0xff00ff00) >> 8);
+}
+
+
+#define michael_block(l, r)	\
+do {				\
+	r ^= rotl(l, 17);	\
+	l += r;			\
+	r ^= xswap(l);		\
+	l += r;			\
+	r ^= rotl(l, 3);	\
+	l += r;			\
+	r ^= rotr(l, 2);	\
+	l += r;			\
+} while (0)
+
+
+static inline u32 get_le32(const u8 *p)
+{
+	return p[0] | (p[1] << 8) | (p[2] << 16) | (p[3] << 24);
+}
+
+
+static inline void put_le32(u8 *p, u32 v)
+{
+	p[0] = v;
+	p[1] = v >> 8;
+	p[2] = v >> 16;
+	p[3] = v >> 24;
+}
+
+
+static void michael_init(void *ctx)
+{
+	struct michael_mic_ctx *mctx = ctx;
+	mctx->pending_len = 0;
+}
+
+
+static void michael_update(void *ctx, const u8 *data, unsigned int len)
+{
+	struct michael_mic_ctx *mctx = ctx;
+
+	if (mctx->pending_len) {
+		int flen = 4 - mctx->pending_len;
+		if (flen > len)
+			flen = len;
+		memcpy(&mctx->pending[mctx->pending_len], data, flen);
+		mctx->pending_len += flen;
+		data += flen;
+		len -= flen;
+
+		if (mctx->pending_len < 4)
+			return;
+
+		mctx->l ^= get_le32(mctx->pending);
+		michael_block(mctx->l, mctx->r);
+		mctx->pending_len = 0;
+	}
+
+	while (len >= 4) {
+		mctx->l ^= get_le32(data);
+		michael_block(mctx->l, mctx->r);
+		data += 4;
+		len -= 4;
+	}
+
+	if (len > 0) {
+		mctx->pending_len = len;
+		memcpy(mctx->pending, data, len);
+	}
+}
+
+
+static void michael_final(void *ctx, u8 *out)
+{
+	struct michael_mic_ctx *mctx = ctx;
+	u8 *data = mctx->pending;
+
+	/* Last block and padding (0x5a, 4..7 x 0) */
+	switch (mctx->pending_len) {
+	case 0:
+		mctx->l ^= 0x5a;
+		break;
+	case 1:
+		mctx->l ^= data[0] | 0x5a00;
+		break;
+	case 2:
+		mctx->l ^= data[0] | (data[1] << 8) | 0x5a0000;
+		break;
+	case 3:
+		mctx->l ^= data[0] | (data[1] << 8) | (data[2] << 16) |
+			0x5a000000;
+		break;
+	}
+	michael_block(mctx->l, mctx->r);
+	/* l ^= 0; */
+	michael_block(mctx->l, mctx->r);
+
+	put_le32(out, mctx->l);
+	put_le32(out + 4, mctx->r);
+}
+
+
+static int michael_setkey(void *ctx, const u8 *key, unsigned int keylen,
+			  u32 *flags)
+{
+	struct michael_mic_ctx *mctx = ctx;
+	if (keylen != 8) {
+		if (flags)
+			*flags = CRYPTO_TFM_RES_BAD_KEY_LEN;
+		return -EINVAL;
+	}
+	mctx->l = get_le32(key);
+	mctx->r = get_le32(key + 4);
+	return 0;
+}
+
+
+static struct crypto_alg michael_mic_alg = {
+	.cra_name	= "michael_mic",
+	.cra_flags	= CRYPTO_ALG_TYPE_DIGEST,
+	.cra_blocksize	= 8,
+	.cra_ctxsize	= sizeof(struct michael_mic_ctx),
+	.cra_module	= THIS_MODULE,
+	.cra_list	= LIST_HEAD_INIT(michael_mic_alg.cra_list),
+	.cra_u		= { .digest = {
+	.dia_digestsize	= 8,
+	.dia_init	= michael_init,
+	.dia_update	= michael_update,
+	.dia_final	= michael_final,
+	.dia_setkey	= michael_setkey } }
+};
+
+
+static int __init michael_mic_init(void)
+{
+	return crypto_register_alg(&michael_mic_alg);
+}
+
+
+static void __exit michael_mic_exit(void)
+{
+	crypto_unregister_alg(&michael_mic_alg);
+}
+
+
+module_init(michael_mic_init);
+module_exit(michael_mic_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Michael MIC");
+MODULE_AUTHOR("Jouni Malinen <jkmaline@cc.hut.fi>");
diff --git a/drivers/staging/rtl8192su/ieee80211/proc.c b/drivers/staging/rtl8192su/ieee80211/proc.c
new file mode 100644
index 00000000000..4f3f9ed7751
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/proc.c
@@ -0,0 +1,116 @@
+/*
+ * Scatterlist Cryptographic API.
+ *
+ * Procfs information.
+ *
+ * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+#include <linux/init.h>
+//#include <linux/crypto.h>
+#include "rtl_crypto.h"
+#include <linux/rwsem.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include "internal.h"
+
+extern struct list_head crypto_alg_list;
+extern struct rw_semaphore crypto_alg_sem;
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	struct list_head *v;
+	loff_t n = *pos;
+
+	down_read(&crypto_alg_sem);
+	list_for_each(v, &crypto_alg_list)
+		if (!n--)
+			return list_entry(v, struct crypto_alg, cra_list);
+	return NULL;
+}
+
+static void *c_next(struct seq_file *m, void *p, loff_t *pos)
+{
+	struct list_head *v = p;
+
+	(*pos)++;
+	v = v->next;
+	return (v == &crypto_alg_list) ?
+		NULL : list_entry(v, struct crypto_alg, cra_list);
+}
+
+static void c_stop(struct seq_file *m, void *p)
+{
+	up_read(&crypto_alg_sem);
+}
+
+static int c_show(struct seq_file *m, void *p)
+{
+	struct crypto_alg *alg = (struct crypto_alg *)p;
+
+	seq_printf(m, "name         : %s\n", alg->cra_name);
+	seq_printf(m, "module       : %s\n",
+		   (alg->cra_module ?
+		    alg->cra_module->name :
+		    "kernel"));
+
+	switch (alg->cra_flags & CRYPTO_ALG_TYPE_MASK) {
+	case CRYPTO_ALG_TYPE_CIPHER:
+		seq_printf(m, "type         : cipher\n");
+		seq_printf(m, "blocksize    : %u\n", alg->cra_blocksize);
+		seq_printf(m, "min keysize  : %u\n",
+					alg->cra_cipher.cia_min_keysize);
+		seq_printf(m, "max keysize  : %u\n",
+					alg->cra_cipher.cia_max_keysize);
+		break;
+
+	case CRYPTO_ALG_TYPE_DIGEST:
+		seq_printf(m, "type         : digest\n");
+		seq_printf(m, "blocksize    : %u\n", alg->cra_blocksize);
+		seq_printf(m, "digestsize   : %u\n",
+		           alg->cra_digest.dia_digestsize);
+		break;
+	case CRYPTO_ALG_TYPE_COMPRESS:
+		seq_printf(m, "type         : compression\n");
+		break;
+	default:
+		seq_printf(m, "type         : unknown\n");
+		break;
+	}
+
+	seq_putc(m, '\n');
+	return 0;
+}
+
+static struct seq_operations crypto_seq_ops = {
+	.start		= c_start,
+	.next		= c_next,
+	.stop		= c_stop,
+	.show		= c_show
+};
+
+static int crypto_info_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &crypto_seq_ops);
+}
+
+static struct file_operations proc_crypto_ops = {
+	.open		= crypto_info_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release
+};
+
+void __init crypto_init_proc(void)
+{
+	struct proc_dir_entry *proc;
+
+	proc = create_proc_entry("crypto", 0, NULL);
+	if (proc)
+		proc->proc_fops = &proc_crypto_ops;
+}
diff --git a/drivers/staging/rtl8192su/ieee80211/readme b/drivers/staging/rtl8192su/ieee80211/readme
new file mode 100644
index 00000000000..5764f285928
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/readme
@@ -0,0 +1,162 @@
+What this layer should do
+
+- It mantain the old mechanism as alternative, so the
+  ipw2100 driver works with really few changes.
+- Encapsulate / Decapsulate ieee80211 packet
+- Handle fragmentation
+- Optionally provide an alterantive mechanism for netif queue stop/wake,
+  so that the ieee80211 layer will pass one fragment per time instead of
+  one txb struct per time. so the driver can stop the queue in the middle
+  of a packet.
+- Provide two different TX interfaces for cards that can handle management
+  frames on one HW queue, and data on another, and for cards that have only
+  one HW queue  (the latter untested and very, very rough).
+- Optionally provide the logic for handling IBSS/MASTER/MONITOR/BSS modes
+  and for the channel, essid and wap get/set wireless extension requests.
+  so that the driver has only to change channel when the ieee stack tell it.
+- Optionally provide a scanning mechanism so that the driver has not to
+  worry about this, just implement the set channel calback and pass
+  frames to the upper layer
+- Optionally provide the bss client protocol handshaking (just with open
+  authentication)
+- Optionally provide the probe request send mechanism
+- Optionally provide the bss master mode logic to handle association
+  protocol (only open authentication) and probe responses.
+- SW wep encryption (with open authentication)
+- It collects some stats
+- It provides beacons to the card when it ask for them
+
+What this layer doesn't do (yet)
+- Perform shared authentication
+- Have full support for master mode (the AP should loop back in the air
+  frames from an associated client to another. This could be done easily
+  with few lines of code, and it is done in my previous version of the
+  stach, but a table of association must be keept and a disassociation
+  policy must be decided and implemented.
+- Handle cleanly the full ieee 802.11 protocol. In AP mode it never
+  disassociate clients, and it is really prone to always allow access.
+  In bss client mode it is a bit rough with AP deauth and disassoc requests.
+- It has not any entry point to view the collected stats.
+- Altought it takes care of the card supported rates in the management frame
+  it sends, support for rate changing on TXed packet is not complete.
+- Give up once associated in bss client mode (it never detect a
+  signal loss condition to disassociate and restart scanning)
+- Provide a mechanism for enabling the TX in monitor mode, so
+  userspace programs can TX raw packets.
+- Provide a mechanism for cards that need that the SW take care of beacon
+  TX completely, in sense that the SW has to enqueue by itself beacons
+  to the card so it TX them (if any...)
+APIs
+
+Callback functions in the original stack has been mantained.
+following has been added (from ieee80211.h)
+
+	/* Softmac-generated frames (mamagement) are TXed via this
+	 * callback if the flag IEEE_SOFTMAC_SINGLE_QUEUE is
+	 * not set. As some cards may have different HW queues that
+	 * one might want to use for data and management frames
+	 * the option to have two callbacks might be useful.
+	 * This fucntion can't sleep.
+	 */
+	int (*softmac_hard_start_xmit)(struct sk_buff *skb,
+			       struct net_device *dev);
+
+	/* used instead of hard_start_xmit (not softmac_hard_start_xmit)
+	 * if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data
+	 * frames. I the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
+	 * then also management frames are sent via this callback.
+	 * This function can't sleep.
+	 */
+	void (*softmac_data_hard_start_xmit)(struct sk_buff *skb,
+			       struct net_device *dev);
+
+	/* stops the HW queue for DATA frames. Useful to avoid
+	 * waste time to TX data frame when we are reassociating
+	 * This function can sleep.
+	 */
+	void (*data_hard_stop)(struct net_device *dev);
+
+	/* OK this is complementar to data_poll_hard_stop */
+	void (*data_hard_resume)(struct net_device *dev);
+
+	/* ask to the driver to retune the radio .
+	 * This function can sleep. the driver should ensure
+	 * the radio has been swithced before return.
+	 */
+	void (*set_chan)(struct net_device *dev,short ch);
+
+	/* These are not used if the ieee stack takes care of
+	 * scanning (IEEE_SOFTMAC_SCAN feature set).
+	 * In this case only the set_chan is used.
+	 *
+	 * The syncro version is similar to the start_scan but
+	 * does not return until all channels has been scanned.
+	 * this is called in user context and should sleep,
+	 * it is called in a work_queue when swithcing to ad-hoc mode
+	 * or in behalf of iwlist scan when the card is associated
+	 * and root user ask for a scan.
+	 * the fucntion stop_scan should stop both the syncro and
+	 * background scanning and can sleep.
+	 * The fucntion start_scan should initiate the background
+	 * scanning and can't sleep.
+	 */
+	void (*scan_syncro)(struct net_device *dev);
+	void (*start_scan)(struct net_device *dev);
+	void (*stop_scan)(struct net_device *dev);
+
+	/* indicate the driver that the link state is changed
+	 * for example it may indicate the card is associated now.
+	 * Driver might be interested in this to apply RX filter
+	 * rules or simply light the LINK led
+	 */
+	void (*link_change)(struct net_device *dev);
+
+Functions hard_data_[resume/stop] are optional and should not be used
+if the driver decides to uses data+management frames enqueue in a
+single HQ queue (thus using just the softmac_hard_data_start_xmit
+callback).
+
+Function that the driver can use are:
+
+ieee80211_get_beacon             - this is called by the driver when
+                                   the HW needs a beacon.
+ieee80211_softmac_start_protocol - this should normally be called in the
+                                   driver open function
+ieee80211_softmac_stop_protocol  - the opposite of the above
+ieee80211_wake_queue             - this is similar to netif_wake_queue
+ieee80211_reset_queue            - this throw away fragments pending(if any)
+ieee80211_stop_queue             - this is similar to netif_stop_queue
+
+
+known BUGS:
+- When performing syncro scan (possiblily when swithcing to ad-hoc mode
+  and when running iwlist scan when associated) there is still an odd
+  behaviour.. I have not looked in this more accurately (yet).
+
+locking:
+locking is done by means of three structures.
+1- ieee->lock (by means of spin_[un]lock_irq[save/restore]
+2- ieee->wx_sem
+3- ieee->scan_sem
+
+the lock 1 is what protect most of the critical sections in the ieee stack.
+the lock 2 is used to avoid that more than one of the SET wireless extension
+handlers (as well as start/stop protocol function) are running at the same time.
+the lock 1 is used when we need to modify or read the shared data in the wx handlers.
+In other words the lock 2 will prevent one SET action will run across another SET
+action (by make sleep the 2nd one) but allow GET actions, while the lock 1
+make atomic those little shared data access in both GET and SET operation.
+So get operation will be never be delayed really: they will never sleep..
+Furthermore in the top of some SET operations a flag is set before acquiring
+the lock. This is an help to make the previous running SET operation to
+finish faster if needed (just in case the second one will totally undo the
+first, so there is not need to complete the 1st really.. ).
+The background scanning mechaninsm is protected by the lock 1 except for the
+workqueue. this wq is here just to let the set_chan callback sleep (I thinked it
+might be appreciated by USB network card driver developer). In this case the lock 3
+take its turn.
+Thus the stop function needs both the locks.
+Funny in the syncro scan the lock 2 play its role (as both the syncro_scan
+function and the stop scan function are called with this semaphore held).
+
+
diff --git a/drivers/staging/rtl8192su/ieee80211/rtl819x_BA.h b/drivers/staging/rtl8192su/ieee80211/rtl819x_BA.h
new file mode 100644
index 00000000000..8ddc8bf9dc2
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/rtl819x_BA.h
@@ -0,0 +1,69 @@
+#ifndef _BATYPE_H_
+#define _BATYPE_H_
+
+#define 	TOTAL_TXBA_NUM	16
+#define	TOTAL_RXBA_NUM	16
+
+#define	BA_SETUP_TIMEOUT	200
+#define	BA_INACT_TIMEOUT	60000
+
+#define	BA_POLICY_DELAYED		0
+#define	BA_POLICY_IMMEDIATE	1
+
+#define	ADDBA_STATUS_SUCCESS			0
+#define	ADDBA_STATUS_REFUSED		37
+#define	ADDBA_STATUS_INVALID_PARAM	38
+
+#define	DELBA_REASON_QSTA_LEAVING	36
+#define	DELBA_REASON_END_BA			37
+#define	DELBA_REASON_UNKNOWN_BA	38
+#define	DELBA_REASON_TIMEOUT			39
+/*  whether need define BA Action frames here?
+struct ieee80211_ADDBA_Req{
+	struct ieee80211_header_data header;
+	u8	category;
+	u8
+} __attribute__ ((packed));
+*/
+//Is this need?I put here just to make it easier to define structure BA_RECORD //WB
+typedef union _SEQUENCE_CONTROL{
+	u16 ShortData;
+	struct
+	{
+		u16	FragNum:4;
+		u16	SeqNum:12;
+	}field;
+}SEQUENCE_CONTROL, *PSEQUENCE_CONTROL;
+
+typedef union _BA_PARAM_SET {
+	u8 charData[2];
+	u16 shortData;
+	struct {
+		u16 AMSDU_Support:1;
+		u16 BAPolicy:1;
+		u16 TID:4;
+		u16 BufferSize:10;
+	} field;
+} BA_PARAM_SET, *PBA_PARAM_SET;
+
+typedef union _DELBA_PARAM_SET {
+	u8 charData[2];
+	u16 shortData;
+	struct {
+		u16 Reserved:11;
+		u16 Initiator:1;
+		u16 TID:4;
+	} field;
+} DELBA_PARAM_SET, *PDELBA_PARAM_SET;
+
+typedef struct _BA_RECORD {
+	struct timer_list		Timer;
+	u8				bValid;
+	u8				DialogToken;
+	BA_PARAM_SET		BaParamSet;
+	u16				BaTimeoutValue;
+	SEQUENCE_CONTROL	BaStartSeqCtrl;
+} BA_RECORD, *PBA_RECORD;
+
+#endif //end _BATYPE_H_
+
diff --git a/drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c b/drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c
new file mode 100644
index 00000000000..cc5623a94b4
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c
@@ -0,0 +1,781 @@
+/********************************************************************************************************************************
+ * This file is created to process BA Action Frame. According to 802.11 spec, there are 3 BA action types at all. And as BA is
+ * related to TS, this part need some struture defined in QOS side code. Also TX RX is going to be resturctured, so how to send
+ * ADDBAREQ ADDBARSP and DELBA packet is still on consideration. Temporarily use MANAGE QUEUE instead of Normal Queue.
+ * WB 2008-05-27
+ * *****************************************************************************************************************************/
+#include "ieee80211.h"
+#include "rtl819x_BA.h"
+
+/********************************************************************************************************************
+ *function:  Activate BA entry. And if Time is nozero, start timer.
+ *   input:  PBA_RECORD 		pBA  //BA entry to be enabled
+ *   	     u16 			Time //indicate time delay.
+ *  output:  none
+********************************************************************************************************************/
+void ActivateBAEntry(struct ieee80211_device* ieee, PBA_RECORD pBA, u16 Time)
+{
+	pBA->bValid = true;
+	if(Time != 0)
+		mod_timer(&pBA->Timer, jiffies + MSECS(Time));
+}
+
+/********************************************************************************************************************
+ *function:  deactivate BA entry, including its timer.
+ *   input:  PBA_RECORD 		pBA  //BA entry to be disabled
+ *  output:  none
+********************************************************************************************************************/
+void DeActivateBAEntry( struct ieee80211_device* ieee, PBA_RECORD pBA)
+{
+	pBA->bValid = false;
+	del_timer_sync(&pBA->Timer);
+}
+/********************************************************************************************************************
+ *function: deactivete BA entry in Tx Ts, and send DELBA.
+ *   input:
+ *   	     PTX_TS_RECORD		pTxTs //Tx Ts which is to deactivate BA entry.
+ *  output:  none
+ *  notice:  As PTX_TS_RECORD structure will be defined in QOS, so wait to be merged. //FIXME
+********************************************************************************************************************/
+u8 TxTsDeleteBA( struct ieee80211_device* ieee, PTX_TS_RECORD	pTxTs)
+{
+	PBA_RECORD		pAdmittedBa = &pTxTs->TxAdmittedBARecord;  //These two BA entries must exist in TS structure
+	PBA_RECORD		pPendingBa = &pTxTs->TxPendingBARecord;
+	u8			bSendDELBA = false;
+
+	// Delete pending BA
+	if(pPendingBa->bValid)
+	{
+		DeActivateBAEntry(ieee, pPendingBa);
+		bSendDELBA = true;
+	}
+
+	// Delete admitted BA
+	if(pAdmittedBa->bValid)
+	{
+		DeActivateBAEntry(ieee, pAdmittedBa);
+		bSendDELBA = true;
+	}
+
+	return bSendDELBA;
+}
+
+/********************************************************************************************************************
+ *function: deactivete BA entry in Tx Ts, and send DELBA.
+ *   input:
+ *   	     PRX_TS_RECORD		pRxTs //Rx Ts which is to deactivate BA entry.
+ *  output:  none
+ *  notice:  As PRX_TS_RECORD structure will be defined in QOS, so wait to be merged. //FIXME, same with above
+********************************************************************************************************************/
+u8 RxTsDeleteBA( struct ieee80211_device* ieee, PRX_TS_RECORD	pRxTs)
+{
+	PBA_RECORD		pBa = &pRxTs->RxAdmittedBARecord;
+	u8			bSendDELBA = false;
+
+	if(pBa->bValid)
+	{
+		DeActivateBAEntry(ieee, pBa);
+		bSendDELBA = true;
+	}
+
+	return bSendDELBA;
+}
+
+/********************************************************************************************************************
+ *function: reset BA entry
+ *   input:
+ *   	     PBA_RECORD		pBA //entry to be reset
+ *  output:  none
+********************************************************************************************************************/
+void ResetBaEntry( PBA_RECORD pBA)
+{
+	pBA->bValid			= false;
+	pBA->BaParamSet.shortData	= 0;
+	pBA->BaTimeoutValue		= 0;
+	pBA->DialogToken		= 0;
+	pBA->BaStartSeqCtrl.ShortData	= 0;
+}
+//These functions need porting here or not?
+/*******************************************************************************************************************************
+ *function:  construct ADDBAREQ and ADDBARSP frame here together.
+ *   input:  u8* 		Dst 	//ADDBA frame's destination
+ *   	     PBA_RECORD 	pBA	//BA_RECORD entry which stores the necessary information for BA.
+ *   	     u16 		StatusCode  //status code in RSP and I will use it to indicate whether it's RSP or REQ(will I?)
+ *   	     u8			type	//indicate whether it's RSP(ACT_ADDBARSP) ow REQ(ACT_ADDBAREQ)
+ *  output:  none
+ *  return:  sk_buff* 		skb     //return constructed skb to xmit
+*******************************************************************************************************************************/
+static struct sk_buff* ieee80211_ADDBA(struct ieee80211_device* ieee, u8* Dst, PBA_RECORD pBA, u16 StatusCode, u8 type)
+{
+	struct sk_buff *skb = NULL;
+	 struct ieee80211_hdr_3addr* BAReq = NULL;
+	u8* tag = NULL;
+	u16 tmp = 0;
+	u16 len = ieee->tx_headroom + 9;
+	//category(1) + action field(1) + Dialog Token(1) + BA Parameter Set(2) +  BA Timeout Value(2) +  BA Start SeqCtrl(2)(or StatusCode(2))
+	IEEE80211_DEBUG(IEEE80211_DL_TRACE | IEEE80211_DL_BA, "========>%s(), frame(%d) sentd to:"MAC_FMT", ieee->dev:%p\n", __FUNCTION__, type, MAC_ARG(Dst), ieee->dev);
+	if (pBA == NULL||ieee == NULL)
+	{
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, "pBA(%p) is NULL or ieee(%p) is NULL\n", pBA, ieee);
+		return NULL;
+	}
+	skb = dev_alloc_skb(len + sizeof( struct ieee80211_hdr_3addr)); //need to add something others? FIXME
+	if (skb == NULL)
+	{
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't alloc skb for ADDBA_REQ\n");
+		return NULL;
+	}
+
+	memset(skb->data, 0, sizeof( struct ieee80211_hdr_3addr));  	//I wonder whether it's necessary. Apparently kernel will not do it when alloc a skb.
+	skb_reserve(skb, ieee->tx_headroom);
+
+	BAReq = ( struct ieee80211_hdr_3addr *) skb_put(skb,sizeof( struct ieee80211_hdr_3addr));
+
+	memcpy(BAReq->addr1, Dst, ETH_ALEN);
+	memcpy(BAReq->addr2, ieee->dev->dev_addr, ETH_ALEN);
+
+	memcpy(BAReq->addr3, ieee->current_network.bssid, ETH_ALEN);
+
+	BAReq->frame_ctl = cpu_to_le16(IEEE80211_STYPE_MANAGE_ACT); //action frame
+
+	//tag += sizeof( struct ieee80211_hdr_3addr); //move to action field
+	tag = (u8*)skb_put(skb, 9);
+	*tag ++= ACT_CAT_BA;
+	*tag ++= type;
+	// Dialog Token
+	*tag ++= pBA->DialogToken;
+
+	if (ACT_ADDBARSP == type)
+	{
+		// Status Code
+		printk("=====>to send ADDBARSP\n");
+		tmp = cpu_to_le16(StatusCode);
+		memcpy(tag, (u8*)&tmp, 2);
+		tag += 2;
+	}
+	// BA Parameter Set
+	tmp = cpu_to_le16(pBA->BaParamSet.shortData);
+	memcpy(tag, (u8*)&tmp, 2);
+	tag += 2;
+	// BA Timeout Value
+	tmp = cpu_to_le16(pBA->BaTimeoutValue);
+	memcpy(tag, (u8*)&tmp, 2);
+	tag += 2;
+
+	if (ACT_ADDBAREQ == type)
+	{
+	// BA Start SeqCtrl
+		memcpy(tag,(u8*)&(pBA->BaStartSeqCtrl), 2);
+		tag += 2;
+	}
+
+	IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_BA, skb->data, skb->len);
+	return skb;
+	//return NULL;
+}
+
+#if 0 //I try to merge ADDBA_REQ and ADDBA_RSP frames together..
+/********************************************************************************************************************
+ *function:  construct ADDBAREQ frame
+ *   input:  u8* 		dst 	//ADDBARsp frame's destination
+ *   	     PBA_RECORD 	pBA	//BA_RECORD entry which stores the necessary information for BA_RSP.
+ *   	     u16 		StatusCode  //status code.
+ *  output:  none
+ *  return:  sk_buff* 		skb     //return constructed skb to xmit
+********************************************************************************************************************/
+static struct sk_buff* ieee80211_ADDBA_Rsp( IN	struct ieee80211_device* ieee, u8* dst, PBA_RECORD pBA, u16 StatusCode)
+{
+	OCTET_STRING	osADDBAFrame, tmp;
+
+	FillOctetString(osADDBAFrame, Buffer, 0);
+	*pLength = 0;
+
+	ConstructMaFrameHdr(
+					Adapter,
+					Addr,
+					ACT_CAT_BA,
+					ACT_ADDBARSP,
+					&osADDBAFrame	);
+
+	// Dialog Token
+	FillOctetString(tmp, &pBA->DialogToken, 1);
+	PacketAppendData(&osADDBAFrame, tmp);
+
+	// Status Code
+	FillOctetString(tmp, &StatusCode, 2);
+	PacketAppendData(&osADDBAFrame, tmp);
+
+	// BA Parameter Set
+	FillOctetString(tmp, &pBA->BaParamSet, 2);
+	PacketAppendData(&osADDBAFrame, tmp);
+
+	// BA Timeout Value
+	FillOctetString(tmp, &pBA->BaTimeoutValue, 2);
+	PacketAppendData(&osADDBAFrame, tmp);
+
+	*pLength = osADDBAFrame.Length;
+}
+#endif
+
+/********************************************************************************************************************
+ *function:  construct DELBA frame
+ *   input:  u8* 		dst 	//DELBA frame's destination
+ *   	     PBA_RECORD 	pBA	//BA_RECORD entry which stores the necessary information for BA
+ *   	     TR_SELECT	        TxRxSelect  //TX RX direction
+ *   	     u16 		ReasonCode  //status code.
+ *  output:  none
+ *  return:  sk_buff* 		skb     //return constructed skb to xmit
+********************************************************************************************************************/
+static struct sk_buff* ieee80211_DELBA(
+	struct ieee80211_device* ieee,
+	u8*		         dst,
+	PBA_RECORD		 pBA,
+	TR_SELECT		 TxRxSelect,
+	u16			 ReasonCode
+	)
+{
+	DELBA_PARAM_SET	DelbaParamSet;
+	struct sk_buff *skb = NULL;
+	 struct ieee80211_hdr_3addr* Delba = NULL;
+	u8* tag = NULL;
+	u16 tmp = 0;
+	//len = head len + DELBA Parameter Set(2) + Reason Code(2)
+	u16 len = 6 + ieee->tx_headroom;
+
+	if (net_ratelimit())
+	IEEE80211_DEBUG(IEEE80211_DL_TRACE | IEEE80211_DL_BA, "========>%s(), ReasonCode(%d) sentd to:"MAC_FMT"\n", __FUNCTION__, ReasonCode, MAC_ARG(dst));
+
+	memset(&DelbaParamSet, 0, 2);
+
+	DelbaParamSet.field.Initiator	= (TxRxSelect==TX_DIR)?1:0;
+	DelbaParamSet.field.TID	= pBA->BaParamSet.field.TID;
+
+	skb = dev_alloc_skb(len + sizeof( struct ieee80211_hdr_3addr)); //need to add something others? FIXME
+	if (skb == NULL)
+	{
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't alloc skb for ADDBA_REQ\n");
+		return NULL;
+	}
+//	memset(skb->data, 0, len+sizeof( struct ieee80211_hdr_3addr));
+	skb_reserve(skb, ieee->tx_headroom);
+
+	Delba = ( struct ieee80211_hdr_3addr *) skb_put(skb,sizeof( struct ieee80211_hdr_3addr));
+
+	memcpy(Delba->addr1, dst, ETH_ALEN);
+	memcpy(Delba->addr2, ieee->dev->dev_addr, ETH_ALEN);
+	memcpy(Delba->addr3, ieee->current_network.bssid, ETH_ALEN);
+	Delba->frame_ctl = cpu_to_le16(IEEE80211_STYPE_MANAGE_ACT); //action frame
+
+	tag = (u8*)skb_put(skb, 6);
+
+	*tag ++= ACT_CAT_BA;
+	*tag ++= ACT_DELBA;
+
+	// DELBA Parameter Set
+	tmp = cpu_to_le16(DelbaParamSet.shortData);
+	memcpy(tag, (u8*)&tmp, 2);
+	tag += 2;
+	// Reason Code
+	tmp = cpu_to_le16(ReasonCode);
+	memcpy(tag, (u8*)&tmp, 2);
+	tag += 2;
+
+	IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_BA, skb->data, skb->len);
+	if (net_ratelimit())
+	IEEE80211_DEBUG(IEEE80211_DL_TRACE | IEEE80211_DL_BA, "<=====%s()\n", __FUNCTION__);
+	return skb;
+}
+
+/********************************************************************************************************************
+ *function: send ADDBAReq frame out
+ *   input:  u8* 		dst 	//ADDBAReq frame's destination
+ *   	     PBA_RECORD 	pBA	//BA_RECORD entry which stores the necessary information for BA
+ *  output:  none
+ *  notice: If any possible, please hide pBA in ieee. And temporarily use Manage Queue as softmac_mgmt_xmit() usually does
+********************************************************************************************************************/
+void ieee80211_send_ADDBAReq(struct ieee80211_device* ieee, u8*	dst, PBA_RECORD	pBA)
+{
+	struct sk_buff *skb = NULL;
+	skb = ieee80211_ADDBA(ieee, dst, pBA, 0, ACT_ADDBAREQ); //construct ACT_ADDBAREQ frames so set statuscode zero.
+
+	if (skb)
+	{
+		softmac_mgmt_xmit(skb, ieee);
+		//add statistic needed here.
+		//and skb will be freed in softmac_mgmt_xmit(), so omit all dev_kfree_skb_any() outside softmac_mgmt_xmit()
+		//WB
+	}
+	else
+	{
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, "alloc skb error in function %s()\n", __FUNCTION__);
+	}
+	return;
+}
+
+/********************************************************************************************************************
+ *function: send ADDBARSP frame out
+ *   input:  u8* 		dst 	//DELBA frame's destination
+ *   	     PBA_RECORD 	pBA	//BA_RECORD entry which stores the necessary information for BA
+ *   	     u16		StatusCode //RSP StatusCode
+ *  output:  none
+ *  notice: If any possible, please hide pBA in ieee. And temporarily use Manage Queue as softmac_mgmt_xmit() usually does
+********************************************************************************************************************/
+void ieee80211_send_ADDBARsp(struct ieee80211_device* ieee, u8* dst, PBA_RECORD pBA, u16 StatusCode)
+{
+	struct sk_buff *skb = NULL;
+	skb = ieee80211_ADDBA(ieee, dst, pBA, StatusCode, ACT_ADDBARSP); //construct ACT_ADDBARSP frames
+	if (skb)
+	{
+		softmac_mgmt_xmit(skb, ieee);
+		//same above
+	}
+	else
+	{
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, "alloc skb error in function %s()\n", __FUNCTION__);
+	}
+
+	return;
+
+}
+/********************************************************************************************************************
+ *function: send ADDBARSP frame out
+ *   input:  u8* 		dst 	//DELBA frame's destination
+ *   	     PBA_RECORD 	pBA	//BA_RECORD entry which stores the necessary information for BA
+ *   	     TR_SELECT          TxRxSelect //TX or RX
+ *   	     u16		ReasonCode //DEL ReasonCode
+ *  output:  none
+ *  notice: If any possible, please hide pBA in ieee. And temporarily use Manage Queue as softmac_mgmt_xmit() usually does
+********************************************************************************************************************/
+
+void ieee80211_send_DELBA(struct ieee80211_device* ieee, u8* dst, PBA_RECORD pBA, TR_SELECT TxRxSelect, u16 ReasonCode)
+{
+	struct sk_buff *skb = NULL;
+	skb = ieee80211_DELBA(ieee, dst, pBA, TxRxSelect, ReasonCode); //construct ACT_ADDBARSP frames
+	if (skb)
+	{
+		softmac_mgmt_xmit(skb, ieee);
+		//same above
+	}
+	else
+	{
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, "alloc skb error in function %s()\n", __FUNCTION__);
+	}
+	return ;
+}
+
+/********************************************************************************************************************
+ *function: RX ADDBAReq
+ *   input:  struct sk_buff *   skb	//incoming ADDBAReq skb.
+ *  return:  0(pass), other(fail)
+ *  notice:  As this function need support of QOS, I comment some code out. And when qos is ready, this code need to be support.
+********************************************************************************************************************/
+int ieee80211_rx_ADDBAReq( struct ieee80211_device* ieee, struct sk_buff *skb)
+{
+	 struct ieee80211_hdr_3addr* req = NULL;
+	u16 rc = 0;
+	u8 * dst = NULL, *pDialogToken = NULL, *tag = NULL;
+	PBA_RECORD pBA = NULL;
+	PBA_PARAM_SET	pBaParamSet = NULL;
+	u16* pBaTimeoutVal = NULL;
+	PSEQUENCE_CONTROL pBaStartSeqCtrl = NULL;
+	PRX_TS_RECORD	pTS = NULL;
+
+	if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 9)
+	{
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BAREQ(%d / %d)\n", skb->len, 	(sizeof( struct ieee80211_hdr_3addr) + 9));
+		return -1;
+	}
+
+	IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_BA, skb->data, skb->len);
+
+	req = ( struct ieee80211_hdr_3addr*) skb->data;
+	tag = (u8*)req;
+	dst = (u8*)(&req->addr2[0]);
+	tag += sizeof( struct ieee80211_hdr_3addr);
+	pDialogToken = tag + 2;  //category+action
+	pBaParamSet = (PBA_PARAM_SET)(tag + 3);   //+DialogToken
+	pBaTimeoutVal = (u16*)(tag + 5);
+	pBaStartSeqCtrl = (PSEQUENCE_CONTROL)(req + 7);
+
+	printk("====================>rx ADDBAREQ from :"MAC_FMT"\n", MAC_ARG(dst));
+//some other capability is not ready now.
+	if(	(ieee->current_network.qos_data.active == 0) ||
+		(ieee->pHTInfo->bCurrentHTSupport == false) ||
+		(ieee->pHTInfo->IOTAction & HT_IOT_ACT_REJECT_ADDBA_REQ)) //||
+	//	(ieee->pStaQos->bEnableRxImmBA == false)	)
+	{
+		rc = ADDBA_STATUS_REFUSED;
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, "Failed to reply on ADDBA_REQ as some capability is not ready(%d, %d)\n", ieee->current_network.qos_data.active, ieee->pHTInfo->bCurrentHTSupport);
+		goto OnADDBAReq_Fail;
+	}
+	// Search for related traffic stream.
+	// If there is no matched TS, reject the ADDBA request.
+	if(	!GetTs(
+			ieee,
+			(PTS_COMMON_INFO*)(&pTS),
+			dst,
+			(u8)(pBaParamSet->field.TID),
+			RX_DIR,
+			true)	)
+	{
+		rc = ADDBA_STATUS_REFUSED;
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't get TS in %s()\n", __FUNCTION__);
+		goto OnADDBAReq_Fail;
+	}
+	pBA = &pTS->RxAdmittedBARecord;
+	// To Determine the ADDBA Req content
+	// We can do much more check here, including BufferSize, AMSDU_Support, Policy, StartSeqCtrl...
+	// I want to check StartSeqCtrl to make sure when we start aggregation!!!
+	//
+	if(pBaParamSet->field.BAPolicy == BA_POLICY_DELAYED)
+	{
+		rc = ADDBA_STATUS_INVALID_PARAM;
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, "BA Policy is not correct in %s()\n", __FUNCTION__);
+		goto OnADDBAReq_Fail;
+	}
+		// Admit the ADDBA Request
+	//
+	DeActivateBAEntry(ieee, pBA);
+	pBA->DialogToken = *pDialogToken;
+	pBA->BaParamSet = *pBaParamSet;
+	pBA->BaTimeoutValue = *pBaTimeoutVal;
+	pBA->BaStartSeqCtrl = *pBaStartSeqCtrl;
+	//for half N mode we only aggregate 1 frame
+	if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)||
+	(ieee->pHTInfo->IOTAction & HT_IOT_ACT_ALLOW_PEER_AGG_ONE_PKT))
+	pBA->BaParamSet.field.BufferSize = 1;
+	else
+	pBA->BaParamSet.field.BufferSize = 32;
+	ActivateBAEntry(ieee, pBA, 0);//pBA->BaTimeoutValue);
+	ieee80211_send_ADDBARsp(ieee, dst, pBA, ADDBA_STATUS_SUCCESS);
+
+	// End of procedure.
+	return 0;
+
+OnADDBAReq_Fail:
+	{
+		BA_RECORD	BA;
+		BA.BaParamSet = *pBaParamSet;
+		BA.BaTimeoutValue = *pBaTimeoutVal;
+		BA.DialogToken = *pDialogToken;
+		BA.BaParamSet.field.BAPolicy = BA_POLICY_IMMEDIATE;
+		ieee80211_send_ADDBARsp(ieee, dst, &BA, rc);
+		return 0; //we send RSP out.
+	}
+
+}
+
+/********************************************************************************************************************
+ *function: RX ADDBARSP
+ *   input:  struct sk_buff *   skb	//incoming ADDBAReq skb.
+ *  return:  0(pass), other(fail)
+ *  notice:  As this function need support of QOS, I comment some code out. And when qos is ready, this code need to be support.
+********************************************************************************************************************/
+int ieee80211_rx_ADDBARsp( struct ieee80211_device* ieee, struct sk_buff *skb)
+{
+	 struct ieee80211_hdr_3addr* rsp = NULL;
+	PBA_RECORD		pPendingBA, pAdmittedBA;
+	PTX_TS_RECORD		pTS = NULL;
+	u8* dst = NULL, *pDialogToken = NULL, *tag = NULL;
+	u16* pStatusCode = NULL, *pBaTimeoutVal = NULL;
+	PBA_PARAM_SET		pBaParamSet = NULL;
+	u16			ReasonCode;
+
+	if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 9)
+	{
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BARSP(%d / %d)\n", skb->len, 	(sizeof( struct ieee80211_hdr_3addr) + 9));
+		return -1;
+	}
+	rsp = ( struct ieee80211_hdr_3addr*)skb->data;
+	tag = (u8*)rsp;
+	dst = (u8*)(&rsp->addr2[0]);
+	tag += sizeof( struct ieee80211_hdr_3addr);
+	pDialogToken = tag + 2;
+	pStatusCode = (u16*)(tag + 3);
+	pBaParamSet = (PBA_PARAM_SET)(tag + 5);
+	pBaTimeoutVal = (u16*)(tag + 7);
+
+	// Check the capability
+	// Since we can always receive A-MPDU, we just check if it is under HT mode.
+	if(     ieee->current_network.qos_data.active == 0  ||
+		ieee->pHTInfo->bCurrentHTSupport == false ||
+		ieee->pHTInfo->bCurrentAMPDUEnable == false )
+	{
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, "reject to ADDBA_RSP as some capability is not ready(%d, %d, %d)\n",ieee->current_network.qos_data.active, ieee->pHTInfo->bCurrentHTSupport, ieee->pHTInfo->bCurrentAMPDUEnable);
+		ReasonCode = DELBA_REASON_UNKNOWN_BA;
+		goto OnADDBARsp_Reject;
+	}
+
+
+	//
+	// Search for related TS.
+	// If there is no TS found, we wil reject ADDBA Rsp by sending DELBA frame.
+	//
+	if (!GetTs(
+			ieee,
+			(PTS_COMMON_INFO*)(&pTS),
+			dst,
+			(u8)(pBaParamSet->field.TID),
+			TX_DIR,
+			false)	)
+	{
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't get TS in %s()\n", __FUNCTION__);
+		ReasonCode = DELBA_REASON_UNKNOWN_BA;
+		goto OnADDBARsp_Reject;
+	}
+
+	pTS->bAddBaReqInProgress = false;
+	pPendingBA = &pTS->TxPendingBARecord;
+	pAdmittedBA = &pTS->TxAdmittedBARecord;
+
+
+	//
+	// Check if related BA is waiting for setup.
+	// If not, reject by sending DELBA frame.
+	//
+	if((pAdmittedBA->bValid==true))
+	{
+		// Since BA is already setup, we ignore all other ADDBA Response.
+		IEEE80211_DEBUG(IEEE80211_DL_BA, "OnADDBARsp(): Recv ADDBA Rsp. Drop because already admit it! \n");
+		return -1;
+	}
+	else if((pPendingBA->bValid == false) ||(*pDialogToken != pPendingBA->DialogToken))
+	{
+		IEEE80211_DEBUG(IEEE80211_DL_ERR,  "OnADDBARsp(): Recv ADDBA Rsp. BA invalid, DELBA! \n");
+		ReasonCode = DELBA_REASON_UNKNOWN_BA;
+		goto OnADDBARsp_Reject;
+	}
+	else
+	{
+		IEEE80211_DEBUG(IEEE80211_DL_BA, "OnADDBARsp(): Recv ADDBA Rsp. BA is admitted! Status code:%X\n", *pStatusCode);
+		DeActivateBAEntry(ieee, pPendingBA);
+	}
+
+
+	if(*pStatusCode == ADDBA_STATUS_SUCCESS)
+	{
+		//
+		// Determine ADDBA Rsp content here.
+		// We can compare the value of BA parameter set that Peer returned and Self sent.
+		// If it is OK, then admitted. Or we can send DELBA to cancel BA mechanism.
+		//
+		if(pBaParamSet->field.BAPolicy == BA_POLICY_DELAYED)
+		{
+			// Since this is a kind of ADDBA failed, we delay next ADDBA process.
+			pTS->bAddBaReqDelayed = true;
+			DeActivateBAEntry(ieee, pAdmittedBA);
+			ReasonCode = DELBA_REASON_END_BA;
+			goto OnADDBARsp_Reject;
+		}
+
+
+		//
+		// Admitted condition
+		//
+		pAdmittedBA->DialogToken = *pDialogToken;
+		pAdmittedBA->BaTimeoutValue = *pBaTimeoutVal;
+		pAdmittedBA->BaStartSeqCtrl = pPendingBA->BaStartSeqCtrl;
+		pAdmittedBA->BaParamSet = *pBaParamSet;
+		DeActivateBAEntry(ieee, pAdmittedBA);
+		ActivateBAEntry(ieee, pAdmittedBA, *pBaTimeoutVal);
+	}
+	else
+	{
+		// Delay next ADDBA process.
+		pTS->bAddBaReqDelayed = true;
+	}
+
+	// End of procedure
+	return 0;
+
+OnADDBARsp_Reject:
+	{
+		BA_RECORD	BA;
+		BA.BaParamSet = *pBaParamSet;
+		ieee80211_send_DELBA(ieee, dst, &BA, TX_DIR, ReasonCode);
+		return 0;
+	}
+
+}
+
+/********************************************************************************************************************
+ *function: RX DELBA
+ *   input:  struct sk_buff *   skb	//incoming ADDBAReq skb.
+ *  return:  0(pass), other(fail)
+ *  notice:  As this function need support of QOS, I comment some code out. And when qos is ready, this code need to be support.
+********************************************************************************************************************/
+int ieee80211_rx_DELBA(struct ieee80211_device* ieee,struct sk_buff *skb)
+{
+	 struct ieee80211_hdr_3addr* delba = NULL;
+	PDELBA_PARAM_SET	pDelBaParamSet = NULL;
+	u16*			pReasonCode = NULL;
+	u8*			dst = NULL;
+
+	if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 6)
+	{
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in DELBA(%d / %d)\n", skb->len, 	(sizeof( struct ieee80211_hdr_3addr) + 6));
+		return -1;
+	}
+
+	if(ieee->current_network.qos_data.active == 0 ||
+		ieee->pHTInfo->bCurrentHTSupport == false )
+	{
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, "received DELBA while QOS or HT is not supported(%d, %d)\n",ieee->current_network.qos_data.active, ieee->pHTInfo->bCurrentHTSupport);
+		return -1;
+	}
+
+	IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_BA, skb->data, skb->len);
+	delba = ( struct ieee80211_hdr_3addr*)skb->data;
+	dst = (u8*)(&delba->addr2[0]);
+	delba += sizeof( struct ieee80211_hdr_3addr);
+	pDelBaParamSet = (PDELBA_PARAM_SET)(delba+2);
+	pReasonCode = (u16*)(delba+4);
+
+	if(pDelBaParamSet->field.Initiator == 1)
+	{
+		PRX_TS_RECORD 	pRxTs;
+
+		if( !GetTs(
+				ieee,
+				(PTS_COMMON_INFO*)&pRxTs,
+				dst,
+				(u8)pDelBaParamSet->field.TID,
+				RX_DIR,
+				false)	)
+		{
+			IEEE80211_DEBUG(IEEE80211_DL_ERR,  "can't get TS for RXTS in %s()\n", __FUNCTION__);
+			return -1;
+		}
+
+		RxTsDeleteBA(ieee, pRxTs);
+	}
+	else
+	{
+		PTX_TS_RECORD	pTxTs;
+
+		if(!GetTs(
+			ieee,
+			(PTS_COMMON_INFO*)&pTxTs,
+			dst,
+			(u8)pDelBaParamSet->field.TID,
+			TX_DIR,
+			false)	)
+		{
+			IEEE80211_DEBUG(IEEE80211_DL_ERR,  "can't get TS for TXTS in %s()\n", __FUNCTION__);
+			return -1;
+		}
+
+		pTxTs->bUsingBa = false;
+		pTxTs->bAddBaReqInProgress = false;
+		pTxTs->bAddBaReqDelayed = false;
+		del_timer_sync(&pTxTs->TsAddBaTimer);
+		//PlatformCancelTimer(Adapter, &pTxTs->TsAddBaTimer);
+		TxTsDeleteBA(ieee, pTxTs);
+	}
+	return 0;
+}
+
+//
+// ADDBA initiate. This can only be called by TX side.
+//
+void
+TsInitAddBA(
+	struct ieee80211_device* ieee,
+	PTX_TS_RECORD	pTS,
+	u8		Policy,
+	u8		bOverwritePending
+	)
+{
+	PBA_RECORD			pBA = &pTS->TxPendingBARecord;
+
+	if(pBA->bValid==true && bOverwritePending==false)
+		return;
+
+	// Set parameters to "Pending" variable set
+	DeActivateBAEntry(ieee, pBA);
+
+	pBA->DialogToken++;						// DialogToken: Only keep the latest dialog token
+	pBA->BaParamSet.field.AMSDU_Support = 0;	// Do not support A-MSDU with A-MPDU now!!
+	pBA->BaParamSet.field.BAPolicy = Policy;	// Policy: Delayed or Immediate
+	pBA->BaParamSet.field.TID = pTS->TsCommonInfo.TSpec.f.TSInfo.field.ucTSID;	// TID
+	// BufferSize: This need to be set according to A-MPDU vector
+	pBA->BaParamSet.field.BufferSize = 32;		// BufferSize: This need to be set according to A-MPDU vector
+	pBA->BaTimeoutValue = 0;					// Timeout value: Set 0 to disable Timer
+	pBA->BaStartSeqCtrl.field.SeqNum = (pTS->TxCurSeq + 3) % 4096; 	// Block Ack will start after 3 packets later.
+
+	ActivateBAEntry(ieee, pBA, BA_SETUP_TIMEOUT);
+
+	ieee80211_send_ADDBAReq(ieee, pTS->TsCommonInfo.Addr, pBA);
+}
+
+void
+TsInitDelBA( struct ieee80211_device* ieee, PTS_COMMON_INFO pTsCommonInfo, TR_SELECT TxRxSelect)
+{
+
+	if(TxRxSelect == TX_DIR)
+	{
+		PTX_TS_RECORD	pTxTs = (PTX_TS_RECORD)pTsCommonInfo;
+
+		if(TxTsDeleteBA(ieee, pTxTs))
+			ieee80211_send_DELBA(
+				ieee,
+				pTsCommonInfo->Addr,
+				(pTxTs->TxAdmittedBARecord.bValid)?(&pTxTs->TxAdmittedBARecord):(&pTxTs->TxPendingBARecord),
+				TxRxSelect,
+				DELBA_REASON_END_BA);
+	}
+	else if(TxRxSelect == RX_DIR)
+	{
+		PRX_TS_RECORD	pRxTs = (PRX_TS_RECORD)pTsCommonInfo;
+		if(RxTsDeleteBA(ieee, pRxTs))
+			ieee80211_send_DELBA(
+				ieee,
+				pTsCommonInfo->Addr,
+				&pRxTs->RxAdmittedBARecord,
+				TxRxSelect,
+				DELBA_REASON_END_BA	);
+	}
+}
+/********************************************************************************************************************
+ *function:  BA setup timer
+ *   input:  unsigned long	 data		//acturally we send TX_TS_RECORD or RX_TS_RECORD to these timer
+ *  return:  NULL
+ *  notice:
+********************************************************************************************************************/
+void BaSetupTimeOut(unsigned long data)
+{
+	PTX_TS_RECORD	pTxTs = (PTX_TS_RECORD)data;
+
+	pTxTs->bAddBaReqInProgress = false;
+	pTxTs->bAddBaReqDelayed = true;
+	pTxTs->TxPendingBARecord.bValid = false;
+}
+
+void TxBaInactTimeout(unsigned long data)
+{
+	PTX_TS_RECORD	pTxTs = (PTX_TS_RECORD)data;
+	struct ieee80211_device *ieee = container_of(pTxTs, struct ieee80211_device, TxTsRecord[pTxTs->num]);
+	TxTsDeleteBA(ieee, pTxTs);
+	ieee80211_send_DELBA(
+		ieee,
+		pTxTs->TsCommonInfo.Addr,
+		&pTxTs->TxAdmittedBARecord,
+		TX_DIR,
+		DELBA_REASON_TIMEOUT);
+}
+
+void RxBaInactTimeout(unsigned long data)
+{
+	PRX_TS_RECORD	pRxTs = (PRX_TS_RECORD)data;
+	struct ieee80211_device *ieee = container_of(pRxTs, struct ieee80211_device, RxTsRecord[pRxTs->num]);
+
+	RxTsDeleteBA(ieee, pRxTs);
+	ieee80211_send_DELBA(
+		ieee,
+		pRxTs->TsCommonInfo.Addr,
+		&pRxTs->RxAdmittedBARecord,
+		RX_DIR,
+		DELBA_REASON_TIMEOUT);
+	return ;
+}
+
diff --git a/drivers/staging/rtl8192su/ieee80211/rtl819x_HT.h b/drivers/staging/rtl8192su/ieee80211/rtl819x_HT.h
new file mode 100644
index 00000000000..16a7462d7df
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/rtl819x_HT.h
@@ -0,0 +1,517 @@
+#ifndef _RTL819XU_HTTYPE_H_
+#define _RTL819XU_HTTYPE_H_
+
+//------------------------------------------------------------
+// The HT Capability element is present in beacons, association request,
+//	reassociation request and probe response frames
+//------------------------------------------------------------
+
+//
+// Operation mode value
+//
+#define HT_OPMODE_NO_PROTECT		0
+#define HT_OPMODE_OPTIONAL		1
+#define HT_OPMODE_40MHZ_PROTECT	2
+#define HT_OPMODE_MIXED			3
+
+//
+// MIMO Power Save Setings
+//
+#define MIMO_PS_STATIC				0
+#define MIMO_PS_DYNAMIC			1
+#define MIMO_PS_NOLIMIT			3
+
+
+//
+//	There should be 128 bits to cover all of the MCS rates. However, since
+//	8190 does not support too much rates, one integer is quite enough.
+//
+
+#define sHTCLng	4
+
+
+#define HT_SUPPORTED_MCS_1SS_BITMAP					0x000000ff
+#define HT_SUPPORTED_MCS_2SS_BITMAP					0x0000ff00
+#define HT_SUPPORTED_MCS_1SS_2SS_BITMAP			HT_MCS_1SS_BITMAP|HT_MCS_1SS_2SS_BITMAP
+
+
+typedef enum _HT_MCS_RATE{
+	HT_MCS0   = 0x00000001,
+	HT_MCS1   = 0x00000002,
+	HT_MCS2   = 0x00000004,
+	HT_MCS3   = 0x00000008,
+	HT_MCS4   = 0x00000010,
+	HT_MCS5   = 0x00000020,
+	HT_MCS6   = 0x00000040,
+	HT_MCS7   = 0x00000080,
+	HT_MCS8   = 0x00000100,
+	HT_MCS9   = 0x00000200,
+	HT_MCS10 = 0x00000400,
+	HT_MCS11 = 0x00000800,
+	HT_MCS12 = 0x00001000,
+	HT_MCS13 = 0x00002000,
+	HT_MCS14 = 0x00004000,
+	HT_MCS15 = 0x00008000,
+	// Do not define MCS32 here although 8190 support MCS32
+}HT_MCS_RATE,*PHT_MCS_RATE;
+
+//
+// Represent Channel Width in HT Capabilities
+//
+typedef enum _HT_CHANNEL_WIDTH{
+	HT_CHANNEL_WIDTH_20 = 0,
+	HT_CHANNEL_WIDTH_20_40 = 1,
+}HT_CHANNEL_WIDTH, *PHT_CHANNEL_WIDTH;
+
+//
+// Represent Extention Channel Offset in HT Capabilities
+// This is available only in 40Mhz mode.
+//
+typedef enum _HT_EXTCHNL_OFFSET{
+	HT_EXTCHNL_OFFSET_NO_EXT = 0,
+	HT_EXTCHNL_OFFSET_UPPER = 1,
+	HT_EXTCHNL_OFFSET_NO_DEF = 2,
+	HT_EXTCHNL_OFFSET_LOWER = 3,
+}HT_EXTCHNL_OFFSET, *PHT_EXTCHNL_OFFSET;
+
+typedef enum _CHNLOP{
+	CHNLOP_NONE = 0, // No Action now
+	CHNLOP_SCAN = 1, // Scan in progress
+	CHNLOP_SWBW = 2, // Bandwidth switching in progress
+	CHNLOP_SWCHNL = 3, // Software Channel switching in progress
+} CHNLOP, *PCHNLOP;
+
+// Determine if the Channel Operation is in progress
+#define CHHLOP_IN_PROGRESS(_pHTInfo)	\
+		((_pHTInfo)->ChnlOp > CHNLOP_NONE) ? TRUE : FALSE
+
+/*
+typedef	union _HT_CAPABILITY{
+	u16	ShortData;
+	u8	CharData[2];
+	struct
+	{
+		u16	AdvCoding:1;
+		u16	ChlWidth:1;
+		u16	MimoPwrSave:2;
+		u16	GreenField:1;
+		u16	ShortGI20Mhz:1;
+		u16	ShortGI40Mhz:1;
+		u16	STBC:1;
+		u16	BeamForm:1;
+		u16	DelayBA:1;
+		u16	MaxAMSDUSize:1;
+		u16	DssCCk:1;
+		u16	PSMP:1;
+		u16	Rsvd:3;
+	}Field;
+}HT_CAPABILITY, *PHT_CAPABILITY;
+
+typedef	union _HT_CAPABILITY_MACPARA{
+	u8	ShortData;
+	u8	CharData[1];
+	struct
+	{
+		u8	MaxRxAMPDU:2;
+		u8	MPDUDensity:2;
+		u8	Rsvd:4;
+	}Field;
+}HT_CAPABILITY_MACPARA, *PHT_CAPABILITY_MACPARA;
+*/
+
+typedef enum _HT_ACTION{
+	ACT_RECOMMAND_WIDTH		= 0,
+	ACT_MIMO_PWR_SAVE 		= 1,
+	ACT_PSMP					= 2,
+	ACT_SET_PCO_PHASE		= 3,
+	ACT_MIMO_CHL_MEASURE	= 4,
+	ACT_RECIPROCITY_CORRECT	= 5,
+	ACT_MIMO_CSI_MATRICS		= 6,
+	ACT_MIMO_NOCOMPR_STEER	= 7,
+	ACT_MIMO_COMPR_STEER		= 8,
+	ACT_ANTENNA_SELECT		= 9,
+} HT_ACTION, *PHT_ACTION;
+
+
+/* 2007/06/07 MH Define sub-carrier mode for 40MHZ. */
+typedef enum _HT_Bandwidth_40MHZ_Sub_Carrier{
+	SC_MODE_DUPLICATE = 0,
+	SC_MODE_LOWER = 1,
+	SC_MODE_UPPER = 2,
+	SC_MODE_FULL40MHZ = 3,
+}HT_BW40_SC_E;
+
+typedef	struct _HT_CAPABILITY_ELE{
+
+	//HT capability info
+	u8	AdvCoding:1;
+	u8	ChlWidth:1;
+	u8	MimoPwrSave:2;
+	u8	GreenField:1;
+	u8	ShortGI20Mhz:1;
+	u8	ShortGI40Mhz:1;
+	u8	TxSTBC:1;
+	u8	RxSTBC:2;
+	u8	DelayBA:1;
+	u8	MaxAMSDUSize:1;
+	u8	DssCCk:1;
+	u8	PSMP:1;
+	u8	Rsvd1:1;
+	u8	LSigTxopProtect:1;
+
+	//MAC HT parameters info
+	u8	MaxRxAMPDUFactor:2;
+	u8	MPDUDensity:3;
+	u8	Rsvd2:3;
+
+	//Supported MCS set
+	u8	MCS[16];
+
+
+	//Extended HT Capability Info
+	u16	ExtHTCapInfo;
+
+	//TXBF Capabilities
+	u8	TxBFCap[4];
+
+	//Antenna Selection Capabilities
+	u8	ASCap;
+
+} __attribute__ ((packed)) HT_CAPABILITY_ELE, *PHT_CAPABILITY_ELE;
+
+//------------------------------------------------------------
+// The HT Information element is present in beacons
+// Only AP is required to include this element
+//------------------------------------------------------------
+
+typedef struct _HT_INFORMATION_ELE{
+	u8	ControlChl;
+
+	u8	ExtChlOffset:2;
+	u8	RecommemdedTxWidth:1;
+	u8	RIFS:1;
+	u8	PSMPAccessOnly:1;
+	u8	SrvIntGranularity:3;
+
+	u8	OptMode:2;
+	u8	NonGFDevPresent:1;
+	u8	Revd1:5;
+	u8	Revd2:8;
+
+	u8	Rsvd3:6;
+	u8	DualBeacon:1;
+	u8	DualCTSProtect:1;
+
+	u8	SecondaryBeacon:1;
+	u8	LSigTxopProtectFull:1;
+	u8	PcoActive:1;
+	u8	PcoPhase:1;
+	u8	Rsvd4:4;
+
+	u8	BasicMSC[16];
+} __attribute__ ((packed)) HT_INFORMATION_ELE, *PHT_INFORMATION_ELE;
+
+//
+// MIMO Power Save control field.
+// This is appear in MIMO Power Save Action Frame
+//
+typedef struct _MIMOPS_CTRL{
+	u8	MimoPsEnable:1;
+	u8	MimoPsMode:1;
+	u8	Reserved:6;
+} MIMOPS_CTRL, *PMIMOPS_CTRL;
+
+typedef enum _HT_SPEC_VER{
+	HT_SPEC_VER_IEEE = 0,
+	HT_SPEC_VER_EWC = 1,
+}HT_SPEC_VER, *PHT_SPEC_VER;
+
+typedef enum _HT_AGGRE_MODE_E{
+	HT_AGG_AUTO = 0,
+	HT_AGG_FORCE_ENABLE = 1,
+	HT_AGG_FORCE_DISABLE = 2,
+}HT_AGGRE_MODE_E, *PHT_AGGRE_MODE_E;
+
+//------------------------------------------------------------
+//  The Data structure is used to keep HT related variables when card is
+//  configured as non-AP STA mode.  **Note**  Current_xxx should be set
+//	to default value in HTInitializeHTInfo()
+//------------------------------------------------------------
+
+typedef struct _RT_HIGH_THROUGHPUT{
+	u8				bEnableHT;
+	u8				bCurrentHTSupport;
+
+	u8				bRegBW40MHz;				// Tx 40MHz channel capablity
+	u8				bCurBW40MHz;				// Tx 40MHz channel capability
+
+	u8				bRegShortGI40MHz;			// Tx Short GI for 40Mhz
+	u8				bCurShortGI40MHz;			// Tx Short GI for 40MHz
+
+	u8				bRegShortGI20MHz;			// Tx Short GI for 20MHz
+	u8				bCurShortGI20MHz;			// Tx Short GI for 20MHz
+
+	u8				bRegSuppCCK;				// Tx CCK rate capability
+	u8				bCurSuppCCK;				// Tx CCK rate capability
+
+	// 802.11n spec version for "peer"
+	HT_SPEC_VER			ePeerHTSpecVer;
+
+
+	// HT related information for "Self"
+	HT_CAPABILITY_ELE	SelfHTCap;		// This is HT cap element sent to peer STA, which also indicate HT Rx capabilities.
+	HT_INFORMATION_ELE	SelfHTInfo;		// This is HT info element sent to peer STA, which also indicate HT Rx capabilities.
+
+	// HT related information for "Peer"
+	u8				PeerHTCapBuf[32];
+	u8				PeerHTInfoBuf[32];
+
+
+	// A-MSDU related
+	u8				bAMSDU_Support;			// This indicates Tx A-MSDU capability
+	u16				nAMSDU_MaxSize;			// This indicates Tx A-MSDU capability
+	u8				bCurrent_AMSDU_Support;	// This indicates Tx A-MSDU capability
+	u16				nCurrent_AMSDU_MaxSize;	// This indicates Tx A-MSDU capability
+
+
+	// AMPDU  related <2006.08.10 Emily>
+	u8				bAMPDUEnable;				// This indicate Tx A-MPDU capability
+	u8				bCurrentAMPDUEnable;		// This indicate Tx A-MPDU capability
+	u8				AMPDU_Factor;				// This indicate Tx A-MPDU capability
+	u8				CurrentAMPDUFactor;		// This indicate Tx A-MPDU capability
+	u8				MPDU_Density;				// This indicate Tx A-MPDU capability
+	u8				CurrentMPDUDensity;			// This indicate Tx A-MPDU capability
+
+	// Forced A-MPDU enable
+	HT_AGGRE_MODE_E	ForcedAMPDUMode;
+	u8				ForcedAMPDUFactor;
+	u8				ForcedMPDUDensity;
+
+	// Forced A-MSDU enable
+	HT_AGGRE_MODE_E	ForcedAMSDUMode;
+	u16				ForcedAMSDUMaxSize;
+
+	u8				bForcedShortGI;
+
+	u8				CurrentOpMode;
+
+	// MIMO PS related
+	u8				SelfMimoPs;
+	u8				PeerMimoPs;
+
+	// 40MHz Channel Offset settings.
+	HT_EXTCHNL_OFFSET	CurSTAExtChnlOffset;
+	u8				bCurTxBW40MHz;	// If we use 40 MHz to Tx
+	u8				PeerBandwidth;
+
+	// For Bandwidth Switching
+	u8				bSwBwInProgress;
+	CHNLOP				ChnlOp; // software switching channel in progress. By Bruce, 2008-02-15.
+	u8				SwBwStep;
+	//struct timer_list		SwBwTimer;  //moved to ieee80211_device. as timer_list need include some header file here.
+
+	// For Realtek proprietary A-MPDU factor for aggregation
+	u8				bRegRT2RTAggregation;
+	u8				RT2RT_HT_Mode;
+	u8				bCurrentRT2RTAggregation;
+	u8				bCurrentRT2RTLongSlotTime;
+	u8				szRT2RTAggBuffer[10];
+
+	// Rx Reorder control
+	u8				bRegRxReorderEnable;
+	u8				bCurRxReorderEnable;
+	u8				RxReorderWinSize;
+	u8				RxReorderPendingTime;
+	u16				RxReorderDropCounter;
+
+#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
+	u8				UsbTxAggrNum;
+#endif
+#ifdef USB_RX_AGGREGATION_SUPPORT
+	u8				UsbRxFwAggrEn;
+	u8				UsbRxFwAggrPageNum;
+	u8				UsbRxFwAggrPacketNum;
+	u8				UsbRxFwAggrTimeout;
+#endif
+
+	// Add for Broadcom(Linksys) IOT. Joseph
+	u8				bIsPeerBcm;
+
+	// For IOT issue.
+	u8				IOTPeer;
+	u32				IOTAction;
+	u8				IOTRaFunc;
+} __attribute__ ((packed)) RT_HIGH_THROUGHPUT, *PRT_HIGH_THROUGHPUT;
+
+
+//------------------------------------------------------------
+// The Data structure is used to keep HT related variable for "each Sta"
+// when card is configured as "AP mode"
+//------------------------------------------------------------
+
+typedef struct _RT_HTINFO_STA_ENTRY{
+	u8			bEnableHT;
+
+	u8			bSupportCck;
+
+	u16			AMSDU_MaxSize;
+
+	u8			AMPDU_Factor;
+	u8			MPDU_Density;
+
+	u8			HTHighestOperaRate;
+
+	u8			bBw40MHz;
+
+	u8			MimoPs;
+
+	u8			McsRateSet[16];
+
+
+}RT_HTINFO_STA_ENTRY, *PRT_HTINFO_STA_ENTRY;
+
+
+
+
+
+//------------------------------------------------------------
+// The Data structure is used to keep HT related variable for "each AP"
+// when card is configured as "STA mode"
+//------------------------------------------------------------
+
+typedef struct _BSS_HT{
+
+	u8				bdSupportHT;
+
+	// HT related elements
+	u8					bdHTCapBuf[32];
+	u16					bdHTCapLen;
+	u8					bdHTInfoBuf[32];
+	u16					bdHTInfoLen;
+
+	HT_SPEC_VER				bdHTSpecVer;
+	//HT_CAPABILITY_ELE			bdHTCapEle;
+	//HT_INFORMATION_ELE		bdHTInfoEle;
+
+	u8					bdRT2RTAggregation;
+	u8					bdRT2RTLongSlotTime;
+	u8					RT2RT_HT_Mode;
+	bool					bdHT1R;
+} __attribute__ ((packed)) BSS_HT, *PBSS_HT;
+
+typedef struct _MIMO_RSSI{
+	u32	EnableAntenna;
+	u32	AntennaA;
+	u32 	AntennaB;
+	u32 	AntennaC;
+	u32 	AntennaD;
+	u32	Average;
+}MIMO_RSSI, *PMIMO_RSSI;
+
+typedef struct _MIMO_EVM{
+	u32	EVM1;
+	u32    EVM2;
+}MIMO_EVM, *PMIMO_EVM;
+
+typedef struct _FALSE_ALARM_STATISTICS{
+	u32	Cnt_Parity_Fail;
+	u32    Cnt_Rate_Illegal;
+	u32	Cnt_Crc8_fail;
+	u32	Cnt_all;
+}FALSE_ALARM_STATISTICS, *PFALSE_ALARM_STATISTICS;
+
+
+extern u8 MCS_FILTER_ALL[16];
+extern u8 MCS_FILTER_1SS[16];
+
+/* 2007/07/11 MH Modify the macro. Becaus STA may link with a N-AP. If we set
+   STA in A/B/G mode and AP is still in N mode. The macro will be wrong. We have
+   to add a macro to judge wireless mode. */
+#define PICK_RATE(_nLegacyRate, _nMcsRate)	\
+		(_nMcsRate==0)?(_nLegacyRate&0x7f):(_nMcsRate)
+/* 2007/07/12 MH We only define legacy and HT wireless mode now. */
+#define	LEGACY_WIRELESS_MODE	IEEE_MODE_MASK
+
+#define CURRENT_RATE(WirelessMode, LegacyRate, HTRate)	\
+					((WirelessMode & (LEGACY_WIRELESS_MODE))!=0)?\
+						(LegacyRate):\
+						(PICK_RATE(LegacyRate, HTRate))
+
+
+
+// MCS Bw 40 {1~7, 12~15,32}
+#define	RATE_ADPT_1SS_MASK 		0xFF
+#define	RATE_ADPT_2SS_MASK	   	0xF0 //Skip MCS8~11 because mcs7 > mcs6, 9, 10, 11. 2007.01.16 by Emily
+#define	RATE_ADPT_MCS32_MASK		0x01
+
+#define 	IS_11N_MCS_RATE(rate)		(rate&0x80)
+
+typedef enum _HT_AGGRE_SIZE{
+	HT_AGG_SIZE_8K = 0,
+	HT_AGG_SIZE_16K = 1,
+	HT_AGG_SIZE_32K = 2,
+	HT_AGG_SIZE_64K = 3,
+}HT_AGGRE_SIZE_E, *PHT_AGGRE_SIZE_E;
+
+/* Indicate different AP vendor for IOT issue */
+typedef enum _HT_IOT_PEER
+{
+	HT_IOT_PEER_UNKNOWN = 0,
+	HT_IOT_PEER_REALTEK = 1,
+	HT_IOT_PEER_REALTEK_92SE = 2,
+	HT_IOT_PEER_BROADCOM = 3,
+	HT_IOT_PEER_RALINK = 4,
+	HT_IOT_PEER_ATHEROS = 5,
+	HT_IOT_PEER_CISCO= 6,
+	HT_IOT_PEER_MARVELL=7,
+	HT_IOT_PEER_92U_SOFTAP = 8,
+	HT_IOT_PEER_SELF_SOFTAP = 9,
+	HT_IOT_PEER_MAX = 10,
+}HT_IOT_PEER_E, *PHTIOT_PEER_E;
+
+//
+// IOT Action for different AP
+//
+typedef enum _HT_IOT_ACTION{
+	HT_IOT_ACT_TX_USE_AMSDU_4K = 0x00000001,
+	HT_IOT_ACT_TX_USE_AMSDU_8K = 0x00000002,
+	HT_IOT_ACT_DISABLE_MCS14 = 0x00000004,
+	HT_IOT_ACT_DISABLE_MCS15 = 0x00000008,
+	HT_IOT_ACT_DISABLE_ALL_2SS = 0x00000010,
+	HT_IOT_ACT_DISABLE_EDCA_TURBO = 0x00000020,
+	HT_IOT_ACT_MGNT_USE_CCK_6M = 0x00000040,
+	HT_IOT_ACT_CDD_FSYNC = 0x00000080,
+	HT_IOT_ACT_PURE_N_MODE = 0x00000100,
+	HT_IOT_ACT_FORCED_CTS2SELF = 0x00000200,
+	HT_IOT_ACT_FORCED_RTS = 0x00000400,
+	HT_IOT_ACT_AMSDU_ENABLE = 0x00000800,
+	HT_IOT_ACT_MID_HIGHPOWER = 0x00001000,
+	HT_IOT_ACT_REJECT_ADDBA_REQ = 0x00002000,
+	HT_IOT_ACT_ALLOW_PEER_AGG_ONE_PKT = 0x00004000,
+	HT_IOT_ACT_EDCA_BIAS_ON_RX = 0x00008000,
+
+	HT_IOT_ACT_HYBRID_AGGREGATION = 0x00010000,
+	HT_IOT_ACT_DISABLE_SHORT_GI = 0x00020000,
+	HT_IOT_ACT_DISABLE_HIGH_POWER = 0x00040000,
+	HT_IOT_ACT_DISABLE_TX_40_MHZ = 0x00080000,
+	HT_IOT_ACT_TX_NO_AGGREGATION = 0x00100000,
+	HT_IOT_ACT_DISABLE_TX_2SS = 0x00200000,
+}HT_IOT_ACTION_E, *PHT_IOT_ACTION_E;
+
+typedef enum _HT_IOT_RAFUNC{
+	HT_IOT_RAFUNC_PEER_1R = 0x01,
+	HT_IOT_RAFUNC_TX_AMSDU = 0x02,
+	HT_IOT_RAFUNC_DISABLE_ALL = 0x80,
+}HT_IOT_RAFUNC, *PHT_IOT_RAFUNC;
+
+typedef enum _RT_HT_CAP{
+	RT_HT_CAP_USE_TURBO_AGGR = 0x01,
+	RT_HT_CAP_USE_LONG_PREAMBLE = 0x02,
+	RT_HT_CAP_USE_AMPDU = 0x04,
+	RT_HT_CAP_USE_WOW = 0x8,
+	RT_HT_CAP_USE_SOFTAP = 0x10,
+	RT_HT_CAP_USE_92SE = 0x20,
+}RT_HT_CAPBILITY, *PRT_HT_CAPBILITY;
+
+#endif //_RTL819XU_HTTYPE_H_
+
diff --git a/drivers/staging/rtl8192su/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192su/ieee80211/rtl819x_HTProc.c
new file mode 100644
index 00000000000..f357085f664
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/rtl819x_HTProc.c
@@ -0,0 +1,2037 @@
+
+//As this function is mainly ported from Windows driver, so leave the name little changed. If any confusion caused, tell me. Created by WB. 2008.05.08
+#include "ieee80211.h"
+#include "rtl819x_HT.h"
+u8 MCS_FILTER_ALL[16] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+
+u8 MCS_FILTER_1SS[16] = {0xff, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+
+u16 MCS_DATA_RATE[2][2][77] =
+	{	{	{13, 26, 39, 52, 78, 104, 117, 130, 26, 52, 78 ,104, 156, 208, 234, 260,
+			39, 78, 117, 234, 312, 351, 390, 52, 104, 156, 208, 312, 416, 468, 520,
+			0, 78, 104, 130, 117, 156, 195, 104, 130, 130, 156, 182, 182, 208, 156, 195,
+			195, 234, 273, 273, 312, 130, 156, 181, 156, 181, 208, 234, 208, 234, 260, 260,
+			286, 195, 234, 273, 234, 273, 312, 351, 312, 351, 390, 390, 429},			// Long GI, 20MHz
+			{14, 29, 43, 58, 87, 116, 130, 144, 29, 58, 87, 116, 173, 231, 260, 289,
+			43, 87, 130, 173, 260, 347, 390, 433, 58, 116, 173, 231, 347, 462, 520, 578,
+			0, 87, 116, 144, 130, 173, 217, 116, 144, 144, 173, 202, 202, 231, 173, 217,
+			217, 260, 303, 303, 347, 144, 173, 202, 173, 202, 231, 260, 231, 260, 289, 289,
+			318, 217, 260, 303, 260, 303, 347, 390, 347, 390, 433, 433, 477}	},		// Short GI, 20MHz
+		{	{27, 54, 81, 108, 162, 216, 243, 270, 54, 108, 162, 216, 324, 432, 486, 540,
+			81, 162, 243, 324, 486, 648, 729, 810, 108, 216, 324, 432, 648, 864, 972, 1080,
+			12, 162, 216, 270, 243, 324, 405, 216, 270, 270, 324, 378, 378, 432, 324, 405,
+			405, 486, 567, 567, 648, 270, 324, 378, 324, 378, 432, 486, 432, 486, 540, 540,
+			594, 405, 486, 567, 486, 567, 648, 729, 648, 729, 810, 810, 891}, 	// Long GI, 40MHz
+			{30, 60, 90, 120, 180, 240, 270, 300, 60, 120, 180, 240, 360, 480, 540, 600,
+			90, 180, 270, 360, 540, 720, 810, 900, 120, 240, 360, 480, 720, 960, 1080, 1200,
+			13, 180, 240, 300, 270, 360, 450, 240, 300, 300, 360, 420, 420, 480, 360, 450,
+			450, 540, 630, 630, 720, 300, 360, 420, 360, 420, 480, 540, 480, 540, 600, 600,
+			660, 450, 540, 630, 540, 630, 720, 810, 720, 810, 900, 900, 990}	}	// Short GI, 40MHz
+	};
+
+static u8 UNKNOWN_BORADCOM[3] = {0x00, 0x14, 0xbf};
+static u8 LINKSYSWRT330_LINKSYSWRT300_BROADCOM[3] = {0x00, 0x1a, 0x70};
+static u8 LINKSYSWRT350_LINKSYSWRT150_BROADCOM[3] = {0x00, 0x1d, 0x7e};
+static u8 NETGEAR834Bv2_BROADCOM[3] = {0x00, 0x1b, 0x2f};
+static u8 BELKINF5D8233V1_RALINK[3] = {0x00, 0x17, 0x3f};	//cosa 03202008
+static u8 BELKINF5D82334V3_RALINK[3] = {0x00, 0x1c, 0xdf};
+static u8 PCI_RALINK[3] = {0x00, 0x90, 0xcc};
+static u8 EDIMAX_RALINK[3] = {0x00, 0x0e, 0x2e};
+static u8 AIRLINK_RALINK[3] = {0x00, 0x18, 0x02};
+static u8 DLINK_ATHEROS_1[3] = {0x00, 0x1c, 0xf0};
+static u8 DLINK_ATHEROS_2[3] = {0x00, 0x21, 0x91};
+static u8 CISCO_BROADCOM[3] = {0x00, 0x17, 0x94};
+static u8 LINKSYS_MARVELL_4400N[3] = {0x00, 0x14, 0xa4};
+// 2008/04/01 MH For Cisco G mode RX TP We need to change FW duration. Shoud we put the
+// code in other place??
+//static u8 WIFI_CISCO_G_AP[3] = {0x00, 0x40, 0x96};
+/********************************************************************************************************************
+ *function:  This function update default settings in pHTInfo structure
+ *   input:  PRT_HIGH_THROUGHPUT	pHTInfo
+ *  output:  none
+ *  return:  none
+ *  notice:  These value need be modified if any changes.
+ * *****************************************************************************************************************/
+void HTUpdateDefaultSetting(struct ieee80211_device* ieee)
+{
+	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
+	//const typeof( ((struct ieee80211_device *)0)->pHTInfo ) *__mptr = &pHTInfo;
+
+	//printk("pHTinfo:%p, &pHTinfo:%p, mptr:%p,  offsetof:%x\n", pHTInfo, &pHTInfo, __mptr, offsetof(struct ieee80211_device, pHTInfo));
+	//printk("===>ieee:%p,\n", ieee);
+	// ShortGI support
+	pHTInfo->bRegShortGI20MHz= 1;
+	pHTInfo->bRegShortGI40MHz= 1;
+
+	// 40MHz channel support
+	pHTInfo->bRegBW40MHz = 1;
+
+	// CCK rate support in 40MHz channel
+	if(pHTInfo->bRegBW40MHz)
+		pHTInfo->bRegSuppCCK = 1;
+	else
+		pHTInfo->bRegSuppCCK = true;
+
+	// AMSDU related
+	pHTInfo->nAMSDU_MaxSize = 7935UL;
+	pHTInfo->bAMSDU_Support = 0;
+
+	// AMPDU related
+	pHTInfo->bAMPDUEnable = 1; //YJ,test,090311
+	pHTInfo->AMPDU_Factor = 2; //// 0: 2n13(8K), 1:2n14(16K), 2:2n15(32K), 3:2n16(64k)
+	pHTInfo->MPDU_Density = 0;// 0: No restriction, 1: 1/8usec, 2: 1/4usec, 3: 1/2usec, 4: 1usec, 5: 2usec, 6: 4usec, 7:8usec
+
+	// MIMO Power Save
+	pHTInfo->SelfMimoPs = 3;// 0: Static Mimo Ps, 1: Dynamic Mimo Ps, 3: No Limitation, 2: Reserved(Set to 3 automatically.)
+	if(pHTInfo->SelfMimoPs == 2)
+		pHTInfo->SelfMimoPs = 3;
+	// 8190 only. Assign rate operation mode to firmware
+	ieee->bTxDisableRateFallBack = 0;
+	ieee->bTxUseDriverAssingedRate = 0;
+
+#ifdef 	TO_DO_LIST
+	// 8190 only. Assign duration operation mode to firmware
+	pMgntInfo->bTxEnableFwCalcDur = (BOOLEAN)pNdisCommon->bRegTxEnableFwCalcDur;
+#endif
+	// 8190 only, Realtek proprietary aggregation mode
+	// Set MPDUDensity=2,   1: Set MPDUDensity=2(32k)  for Realtek AP and set MPDUDensity=0(8k) for others
+	pHTInfo->bRegRT2RTAggregation = 1;//0: Set MPDUDensity=2,   1: Set MPDUDensity=2(32k)  for Realtek AP and set MPDUDensity=0(8k) for others
+
+	// For Rx Reorder Control
+	pHTInfo->bRegRxReorderEnable = 1;//YJ,test,090311
+	pHTInfo->RxReorderWinSize = 64;
+	pHTInfo->RxReorderPendingTime = 30;
+
+#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
+	pHTInfo->UsbTxAggrNum = 4;
+#endif
+#ifdef USB_RX_AGGREGATION_SUPPORT
+#ifdef RTL8192SU
+	pHTInfo->UsbRxFwAggrEn = 1;
+	pHTInfo->UsbRxFwAggrPageNum = 16;
+	pHTInfo->UsbRxFwAggrPacketNum = 8;
+	pHTInfo->UsbRxFwAggrTimeout = 4; ////usb rx FW aggregation timeout threshold.It's in units of 64us
+	// For page size of receive packet buffer.
+	pHTInfo->UsbRxPageSize= 128;
+#else
+	pHTInfo->UsbRxFwAggrEn = 1;
+	pHTInfo->UsbRxFwAggrPageNum = 24;
+	pHTInfo->UsbRxFwAggrPacketNum = 8;
+	pHTInfo->UsbRxFwAggrTimeout = 16; ////usb rx FW aggregation timeout threshold.It's in units of 64us
+#endif
+#endif
+
+
+}
+/********************************************************************************************************************
+ *function:  This function print out each field on HT capability IE mainly from (Beacon/ProbeRsp/AssocReq)
+ *   input:  u8*	CapIE       //Capability IE to be printed out
+ *   	     u8* 	TitleString //mainly print out caller function
+ *  output:  none
+ *  return:  none
+ *  notice:  Driver should not print out this message by default.
+ * *****************************************************************************************************************/
+void HTDebugHTCapability(u8* CapIE, u8* TitleString )
+{
+
+	static u8	EWC11NHTCap[] = {0x00, 0x90, 0x4c, 0x33};	// For 11n EWC definition, 2007.07.17, by Emily
+	PHT_CAPABILITY_ELE 		pCapELE;
+
+	if(!memcmp(CapIE, EWC11NHTCap, sizeof(EWC11NHTCap)))
+	{
+		//EWC IE
+		IEEE80211_DEBUG(IEEE80211_DL_HT, "EWC IE in %s()\n", __FUNCTION__);
+		pCapELE = (PHT_CAPABILITY_ELE)(&CapIE[4]);
+	}else
+		pCapELE = (PHT_CAPABILITY_ELE)(&CapIE[0]);
+
+	IEEE80211_DEBUG(IEEE80211_DL_HT, "<Log HT Capability>. Called by %s\n", TitleString );
+
+	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tSupported Channel Width = %s\n", (pCapELE->ChlWidth)?"20MHz": "20/40MHz");
+	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tSupport Short GI for 20M = %s\n", (pCapELE->ShortGI20Mhz)?"YES": "NO");
+	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tSupport Short GI for 40M = %s\n", (pCapELE->ShortGI40Mhz)?"YES": "NO");
+	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tSupport TX STBC = %s\n", (pCapELE->TxSTBC)?"YES": "NO");
+	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tMax AMSDU Size = %s\n", (pCapELE->MaxAMSDUSize)?"3839": "7935");
+	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tSupport CCK in 20/40 mode = %s\n", (pCapELE->DssCCk)?"YES": "NO");
+	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tMax AMPDU Factor = %d\n", pCapELE->MaxRxAMPDUFactor);
+	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tMPDU Density = %d\n", pCapELE->MPDUDensity);
+	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tMCS Rate Set = [%x][%x][%x][%x][%x]\n", pCapELE->MCS[0],\
+				pCapELE->MCS[1], pCapELE->MCS[2], pCapELE->MCS[3], pCapELE->MCS[4]);
+	return;
+
+}
+/********************************************************************************************************************
+ *function:  This function print out each field on HT Information IE mainly from (Beacon/ProbeRsp)
+ *   input:  u8*	InfoIE       //Capability IE to be printed out
+ *   	     u8* 	TitleString //mainly print out caller function
+ *  output:  none
+ *  return:  none
+ *  notice:  Driver should not print out this message by default.
+ * *****************************************************************************************************************/
+void HTDebugHTInfo(u8*	InfoIE, u8* TitleString)
+{
+
+	static u8	EWC11NHTInfo[] = {0x00, 0x90, 0x4c, 0x34};	// For 11n EWC definition, 2007.07.17, by Emily
+	PHT_INFORMATION_ELE		pHTInfoEle;
+
+	if(!memcmp(InfoIE, EWC11NHTInfo, sizeof(EWC11NHTInfo)))
+	{
+		// Not EWC IE
+		IEEE80211_DEBUG(IEEE80211_DL_HT, "EWC IE in %s()\n", __FUNCTION__);
+		pHTInfoEle = (PHT_INFORMATION_ELE)(&InfoIE[4]);
+	}else
+		pHTInfoEle = (PHT_INFORMATION_ELE)(&InfoIE[0]);
+
+
+	IEEE80211_DEBUG(IEEE80211_DL_HT, "<Log HT Information Element>. Called by %s\n", TitleString);
+
+	IEEE80211_DEBUG(IEEE80211_DL_HT, "\tPrimary channel = %d\n", pHTInfoEle->ControlChl);
+	IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSenondary channel =");
+	switch(pHTInfoEle->ExtChlOffset)
+	{
+		case 0:
+			IEEE80211_DEBUG(IEEE80211_DL_HT, "Not Present\n");
+			break;
+		case 1:
+			IEEE80211_DEBUG(IEEE80211_DL_HT, "Upper channel\n");
+			break;
+		case 2:
+			IEEE80211_DEBUG(IEEE80211_DL_HT, "Reserved. Eooro!!!\n");
+			break;
+		case 3:
+			IEEE80211_DEBUG(IEEE80211_DL_HT, "Lower Channel\n");
+			break;
+	}
+	IEEE80211_DEBUG(IEEE80211_DL_HT, "\tRecommended channel width = %s\n", (pHTInfoEle->RecommemdedTxWidth)?"20Mhz": "40Mhz");
+
+	IEEE80211_DEBUG(IEEE80211_DL_HT, "\tOperation mode for protection = ");
+	switch(pHTInfoEle->OptMode)
+	{
+		case 0:
+			IEEE80211_DEBUG(IEEE80211_DL_HT, "No Protection\n");
+			break;
+		case 1:
+			IEEE80211_DEBUG(IEEE80211_DL_HT, "HT non-member protection mode\n");
+			break;
+		case 2:
+			IEEE80211_DEBUG(IEEE80211_DL_HT, "Suggest to open protection\n");
+			break;
+		case 3:
+			IEEE80211_DEBUG(IEEE80211_DL_HT, "HT mixed mode\n");
+			break;
+	}
+
+	IEEE80211_DEBUG(IEEE80211_DL_HT, "\tBasic MCS Rate Set = [%x][%x][%x][%x][%x]\n", pHTInfoEle->BasicMSC[0],\
+				pHTInfoEle->BasicMSC[1], pHTInfoEle->BasicMSC[2], pHTInfoEle->BasicMSC[3], pHTInfoEle->BasicMSC[4]);
+	return;
+}
+
+/*
+*	Return:     	true if station in half n mode and AP supports 40 bw
+*/
+bool IsHTHalfNmode40Bandwidth(struct ieee80211_device* ieee)
+{
+	bool			retValue = false;
+	PRT_HIGH_THROUGHPUT	 pHTInfo = ieee->pHTInfo;
+
+	if(pHTInfo->bCurrentHTSupport == false )	// wireless is n mode
+		retValue = false;
+	else if(pHTInfo->bRegBW40MHz == false)	// station supports 40 bw
+		retValue = false;
+	else if(!ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)) 	// station in half n mode
+		retValue = false;
+	else if(((PHT_CAPABILITY_ELE)(pHTInfo->PeerHTCapBuf))->ChlWidth) // ap support 40 bw
+		retValue = true;
+	else
+		retValue = false;
+
+	return retValue;
+}
+
+bool IsHTHalfNmodeSGI(struct ieee80211_device* ieee, bool is40MHz)
+{
+	bool			retValue = false;
+	PRT_HIGH_THROUGHPUT	 pHTInfo = ieee->pHTInfo;
+
+	if(pHTInfo->bCurrentHTSupport == false )	// wireless is n mode
+		retValue = false;
+	else if(!ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)) 	// station in half n mode
+		retValue = false;
+	else if(is40MHz) // ap support 40 bw
+	{
+		if(((PHT_CAPABILITY_ELE)(pHTInfo->PeerHTCapBuf))->ShortGI40Mhz) // ap support 40 bw short GI
+			retValue = true;
+		else
+			retValue = false;
+	}
+	else
+	{
+		if(((PHT_CAPABILITY_ELE)(pHTInfo->PeerHTCapBuf))->ShortGI20Mhz) // ap support 40 bw short GI
+			retValue = true;
+		else
+			retValue = false;
+	}
+
+	return retValue;
+}
+
+u16 HTHalfMcsToDataRate(struct ieee80211_device* ieee, 	u8	nMcsRate)
+{
+
+	u8	is40MHz;
+	u8	isShortGI;
+
+	is40MHz  =  (IsHTHalfNmode40Bandwidth(ieee))?1:0;
+	isShortGI = (IsHTHalfNmodeSGI(ieee, is40MHz))? 1:0;
+
+	return MCS_DATA_RATE[is40MHz][isShortGI][(nMcsRate&0x7f)];
+}
+
+
+u16 HTMcsToDataRate( struct ieee80211_device* ieee, u8 nMcsRate)
+{
+	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
+
+	u8	is40MHz = (pHTInfo->bCurBW40MHz)?1:0;
+	u8	isShortGI = (pHTInfo->bCurBW40MHz)?
+						((pHTInfo->bCurShortGI40MHz)?1:0):
+						((pHTInfo->bCurShortGI20MHz)?1:0);
+	return MCS_DATA_RATE[is40MHz][isShortGI][(nMcsRate&0x7f)];
+}
+
+/********************************************************************************************************************
+ *function:  This function returns current datarate.
+ *   input:  struct ieee80211_device* 	ieee
+ *   	     u8 			nDataRate
+ *  output:  none
+ *  return:  tx rate
+ *  notice:  quite unsure about how to use this function //wb
+ * *****************************************************************************************************************/
+u16  TxCountToDataRate( struct ieee80211_device* ieee, u8 nDataRate)
+{
+	//PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
+	u16		CCKOFDMRate[12] = {0x02 , 0x04 , 0x0b , 0x16 , 0x0c , 0x12 , 0x18 , 0x24 , 0x30 , 0x48 , 0x60 , 0x6c};
+	u8	is40MHz = 0;
+	u8	isShortGI = 0;
+
+	if(nDataRate < 12)
+	{
+		return CCKOFDMRate[nDataRate];
+	}
+	else
+	{
+		if (nDataRate >= 0x10 && nDataRate <= 0x1f)//if(nDataRate > 11 && nDataRate < 28 )
+		{
+			is40MHz = 0;
+			isShortGI = 0;
+
+		      // nDataRate = nDataRate - 12;
+		}
+		else if(nDataRate >=0x20  && nDataRate <= 0x2f ) //(27, 44)
+		{
+			is40MHz = 1;
+			isShortGI = 0;
+
+			//nDataRate = nDataRate - 28;
+		}
+		else if(nDataRate >= 0x30  && nDataRate <= 0x3f )  //(43, 60)
+		{
+			is40MHz = 0;
+			isShortGI = 1;
+
+			//nDataRate = nDataRate - 44;
+		}
+		else if(nDataRate >= 0x40  && nDataRate <= 0x4f ) //(59, 76)
+		{
+			is40MHz = 1;
+			isShortGI = 1;
+
+			//nDataRate = nDataRate - 60;
+		}
+		return MCS_DATA_RATE[is40MHz][isShortGI][nDataRate&0xf];
+	}
+}
+
+
+
+bool IsHTHalfNmodeAPs(struct ieee80211_device* ieee)
+{
+	bool			retValue = false;
+	struct ieee80211_network* net = &ieee->current_network;
+#if 0
+	if(pMgntInfo->bHalfNMode == false)
+		retValue = false;
+	else
+#endif
+	if((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3)==0) ||
+		     (memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3)==0) ||
+		     (memcmp(net->bssid, PCI_RALINK, 3)==0) ||
+		     (memcmp(net->bssid, EDIMAX_RALINK, 3)==0) ||
+		     (memcmp(net->bssid, AIRLINK_RALINK, 3)==0) ||
+		     (net->ralink_cap_exist))
+		retValue = true;
+	else if((memcmp(net->bssid, UNKNOWN_BORADCOM, 3)==0) ||
+    		    (memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0)||
+    		    (memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3)==0)||
+    		    (memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3)==0) ||
+    		    (net->broadcom_cap_exist))
+    		  retValue = true;
+	else if(net->bssht.bdRT2RTAggregation)
+		retValue = true;
+	else
+		retValue = false;
+
+	return retValue;
+}
+
+/********************************************************************************************************************
+ *function:  This function returns peer IOT.
+ *   input:  struct ieee80211_device* 	ieee
+ *  output:  none
+ *  return:
+ *  notice:
+ * *****************************************************************************************************************/
+void HTIOTPeerDetermine(struct ieee80211_device* ieee)
+{
+	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
+	struct ieee80211_network* net = &ieee->current_network;
+	//FIXME: need to decide  92U_SOFTAP //LZM,090320
+	if(net->bssht.bdRT2RTAggregation){
+		pHTInfo->IOTPeer = HT_IOT_PEER_REALTEK;
+		if(net->bssht.RT2RT_HT_Mode & RT_HT_CAP_USE_92SE){
+			pHTInfo->IOTPeer = HT_IOT_PEER_REALTEK_92SE;
+		}
+	}
+	else if(net->broadcom_cap_exist)
+		pHTInfo->IOTPeer = HT_IOT_PEER_BROADCOM;
+	else if((memcmp(net->bssid, UNKNOWN_BORADCOM, 3)==0) ||
+			(memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0)||
+			(memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3)==0)||
+			(memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3)==0) )
+		pHTInfo->IOTPeer = HT_IOT_PEER_BROADCOM;
+	else if((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3)==0) ||
+			(memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3)==0) ||
+			(memcmp(net->bssid, PCI_RALINK, 3)==0) ||
+			(memcmp(net->bssid, EDIMAX_RALINK, 3)==0) ||
+			(memcmp(net->bssid, AIRLINK_RALINK, 3)==0) ||
+			 net->ralink_cap_exist)
+		pHTInfo->IOTPeer = HT_IOT_PEER_RALINK;
+	else if((net->atheros_cap_exist )||
+		(memcmp(net->bssid, DLINK_ATHEROS_1, 3) == 0)||
+		(memcmp(net->bssid, DLINK_ATHEROS_2, 3) == 0))
+		pHTInfo->IOTPeer = HT_IOT_PEER_ATHEROS;
+	else if(memcmp(net->bssid, CISCO_BROADCOM, 3)==0)
+		pHTInfo->IOTPeer = HT_IOT_PEER_CISCO;
+	else if ((memcmp(net->bssid, LINKSYS_MARVELL_4400N, 3) == 0) ||
+		  net->marvell_cap_exist)
+		pHTInfo->IOTPeer = HT_IOT_PEER_MARVELL;
+	else
+		pHTInfo->IOTPeer = HT_IOT_PEER_UNKNOWN;
+
+	IEEE80211_DEBUG(IEEE80211_DL_IOT, "Joseph debug!! IOTPEER: %x\n", pHTInfo->IOTPeer);
+}
+/********************************************************************************************************************
+ *function:  Check whether driver should declare received rate up to MCS13 only since some chipset is not good
+ *	     at receiving MCS14~15 frame from some AP.
+ *   input:  struct ieee80211_device* 	ieee
+ *   	     u8 *			PeerMacAddr
+ *  output:  none
+ *  return:  return 1 if driver should declare MCS13 only(otherwise return 0)
+  * *****************************************************************************************************************/
+u8 HTIOTActIsDisableMCS14(struct ieee80211_device* ieee, u8* PeerMacAddr)
+{
+	u8 ret = 0;
+#if 0
+	// Apply for 819u only
+#if (HAL_CODE_BASE==RTL8192 && DEV_BUS_TYPE==USB_INTERFACE)
+	if((memcmp(PeerMacAddr, UNKNOWN_BORADCOM, 3)==0) ||
+    		(memcmp(PeerMacAddr, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0)
+	    )
+	{
+		ret = 1;
+	}
+
+
+	if(pHTInfo->bCurrentRT2RTAggregation)
+	{
+		// The parameter of pHTInfo->bCurrentRT2RTAggregation must be decided previously
+		ret = 1;
+	}
+#endif
+#endif
+	return ret;
+ }
+
+
+/**
+* Function:	HTIOTActIsDisableMCS15
+*
+* Overview:	Check whether driver should declare capability of receving MCS15
+*
+* Input:
+*			PADAPTER		Adapter,
+*
+* Output:		None
+* Return:     	true if driver should disable MCS15
+* 2008.04.15	Emily
+*/
+bool HTIOTActIsDisableMCS15(struct ieee80211_device* ieee)
+{
+	bool retValue = false;
+
+#ifdef TODO
+	// Apply for 819u only
+#if (HAL_CODE_BASE==RTL8192)
+
+#if (DEV_BUS_TYPE == USB_INTERFACE)
+	// Alway disable MCS15 by Jerry Chang's request.by Emily, 2008.04.15
+	retValue = true;
+#elif (DEV_BUS_TYPE == PCI_INTERFACE)
+	// Enable MCS15 if the peer is Cisco AP. by Emily, 2008.05.12
+//	if(pBssDesc->bCiscoCapExist)
+//		retValue = false;
+//	else
+		retValue = false;
+#endif
+#endif
+#endif
+	// Jerry Chang suggest that 8190 1x2 does not need to disable MCS15
+
+	return retValue;
+}
+
+/**
+* Function:	HTIOTActIsDisableMCSTwoSpatialStream
+*
+* Overview:	Check whether driver should declare capability of receving All 2 ss packets
+*
+* Input:
+*		PADAPTER		Adapter,
+*
+* Output:	None
+* Return:     	true if driver should disable all two spatial stream packet
+* 2008.04.21	Emily
+*/
+bool HTIOTActIsDisableMCSTwoSpatialStream(struct ieee80211_device* ieee)
+{
+	bool retValue = false;
+#ifdef TODO
+	// Apply for 819u only
+//#if (HAL_CODE_BASE==RTL8192)
+
+	//This rule only apply to Belkin(Ralink) AP
+	if(IS_UNDER_11N_AES_MODE(Adapter))
+	{
+		if((PlatformCompareMemory(PeerMacAddr, BELKINF5D8233V1_RALINK, 3)==0) ||
+				(PlatformCompareMemory(PeerMacAddr, PCI_RALINK, 3)==0) ||
+				(PlatformCompareMemory(PeerMacAddr, EDIMAX_RALINK, 3)==0))
+		{
+			//Set True to disable this function. Disable by default, Emily, 2008.04.23
+			retValue = false;
+		}
+	}
+
+//#endif
+#endif
+#if 1
+#if (defined(RTL8192SE) || (defined(RTL8192SU)))
+       PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
+	if(ieee->is_ap_in_wep_tkip && ieee->is_ap_in_wep_tkip(ieee->dev))
+	{
+		if( (pHTInfo->IOTPeer != HT_IOT_PEER_ATHEROS) &&
+		    (pHTInfo->IOTPeer != HT_IOT_PEER_UNKNOWN) &&
+		    (pHTInfo->IOTPeer != HT_IOT_PEER_MARVELL) )
+			retValue = true;
+	}
+#endif
+#endif
+	return retValue;
+}
+
+/********************************************************************************************************************
+ *function:  Check whether driver should disable EDCA turbo mode
+ *   input:  struct ieee80211_device* 	ieee
+ *   	     u8* 			PeerMacAddr
+ *  output:  none
+ *  return:  return 1 if driver should disable EDCA turbo mode(otherwise return 0)
+  * *****************************************************************************************************************/
+u8 HTIOTActIsDisableEDCATurbo(struct ieee80211_device* 	ieee, u8* PeerMacAddr)
+{
+	u8	retValue = false;	// default enable EDCA Turbo mode.
+	// Set specific EDCA parameter for different AP in DM handler.
+
+	return retValue;
+#if 0
+	if((memcmp(PeerMacAddr, UNKNOWN_BORADCOM, 3)==0)||
+		(memcmp(PeerMacAddr, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0)||
+		(memcmp(PeerMacAddr, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3)==0)||
+		(memcmp(PeerMacAddr, NETGEAR834Bv2_BROADCOM, 3)==0))
+
+	{
+		retValue = 1;	//Linksys disable EDCA turbo mode
+	}
+
+	return retValue;
+#endif
+}
+
+/********************************************************************************************************************
+ *function:  Check whether we need to use OFDM to sned MGNT frame for broadcom AP
+ *   input:  struct ieee80211_network *network   //current network we live
+ *  output:  none
+ *  return:  return 1 if true
+  * *****************************************************************************************************************/
+u8 HTIOTActIsMgntUseCCK6M(struct ieee80211_network *network)
+{
+	u8	retValue = 0;
+
+	// 2008/01/25 MH Judeg if we need to use OFDM to sned MGNT frame for broadcom AP.
+	// 2008/01/28 MH We must prevent that we select null bssid to link.
+
+	if(network->broadcom_cap_exist)
+	{
+		retValue = 1;
+	}
+
+	return retValue;
+}
+
+u8 HTIOTActIsForcedCTS2Self(struct ieee80211_network *network)
+{
+	u8 	retValue = 0;
+
+	if(network->marvell_cap_exist)
+	{
+		retValue = 1;
+	}
+
+	return retValue;
+}
+
+u8 HTIOTActIsForcedRTSCTS(struct ieee80211_device *ieee, struct ieee80211_network *network)
+{
+	u8	retValue = 0;
+	printk("============>%s(), %d\n", __FUNCTION__, network->realtek_cap_exit);
+	// Force protection
+#if defined(RTL8192SE) || defined(RTL8192SU)
+	if(ieee->pHTInfo->bCurrentHTSupport)
+	{
+		//if(!network->realtek_cap_exit)
+		if((ieee->pHTInfo->IOTPeer != HT_IOT_PEER_REALTEK)&&
+		   (ieee->pHTInfo->IOTPeer != HT_IOT_PEER_REALTEK_92SE))
+	{
+			if((ieee->pHTInfo->IOTAction & HT_IOT_ACT_TX_NO_AGGREGATION) == 0)
+				retValue = 1;
+		}
+	}
+#endif
+	return retValue;
+}
+
+u8
+HTIOTActIsForcedAMSDU8K(struct ieee80211_device *ieee, struct ieee80211_network *network)
+{
+	u8 retValue = 0;
+
+	return retValue;
+}
+
+u8 HTIOTActIsCCDFsync(u8* PeerMacAddr)
+{
+	u8	retValue = 0;
+#ifndef RTL8192SE
+	if(	(memcmp(PeerMacAddr, UNKNOWN_BORADCOM, 3)==0) ||
+	    	(memcmp(PeerMacAddr, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0) ||
+	    	(memcmp(PeerMacAddr, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) ==0))
+	{
+		retValue = 1;
+	}
+#endif
+	return retValue;
+}
+
+/*
+  *  819xS single chip b-cut series cannot handle BAR
+  */
+u8
+HTIOCActRejcectADDBARequest(struct ieee80211_network *network)
+{
+	u8	retValue = 0;
+	//if(IS_HARDWARE_TYPE_8192SE(Adapter) ||
+	//	IS_HARDWARE_TYPE_8192SU(Adapter)
+	//)
+#if (defined RTL8192SE || defined RTL8192SU)
+	{
+		// Do not reject ADDBA REQ because some of the AP may
+		// keep on sending ADDBA REQ qhich cause DHCP fail or ping loss!
+		// by HPFan, 2008/12/30
+
+		//if(pBssDesc->Vender == HT_IOT_PEER_MARVELL)
+		//	return FALSE;
+
+	}
+#endif
+
+	return retValue;
+
+}
+
+/*
+  *  EDCA parameters bias on downlink
+  */
+  u8
+  HTIOTActIsEDCABiasRx(struct ieee80211_device* ieee,struct ieee80211_network *network)
+{
+	u8	retValue = 0;
+	//if(IS_HARDWARE_TYPE_8192SU(Adapter))
+#ifdef RTL8192SU
+	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
+	{
+//#if UNDER_VISTA
+//		if(pBssDesc->Vender==HT_IOT_PEER_ATHEROS ||
+//			pBssDesc->Vender==HT_IOT_PEER_RALINK)
+//#else
+		if(pHTInfo->IOTPeer==HT_IOT_PEER_ATHEROS ||
+		   pHTInfo->IOTPeer==HT_IOT_PEER_BROADCOM ||
+		   pHTInfo->IOTPeer==HT_IOT_PEER_RALINK)
+//#endif
+			return 1;
+
+	}
+#endif
+	return retValue;
+}
+
+u8
+HTIOTActDisableShortGI(struct ieee80211_device* ieee,struct ieee80211_network *network)
+{
+	u8	retValue = 0;
+	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
+
+	if(pHTInfo->IOTPeer==HT_IOT_PEER_RALINK)
+	{
+		if(network->bssht.bdHT1R)
+			retValue = 1;
+	}
+
+	return retValue;
+}
+
+u8
+HTIOTActDisableHighPower(struct ieee80211_device* ieee,struct ieee80211_network *network)
+{
+	u8	retValue = 0;
+	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
+
+	if(pHTInfo->IOTPeer==HT_IOT_PEER_RALINK)
+	{
+		if(network->bssht.bdHT1R)
+			retValue = 1;
+	}
+
+	return retValue;
+}
+
+void
+HTIOTActDetermineRaFunc(struct ieee80211_device* ieee,	bool	bPeerRx2ss)
+{
+	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
+	pHTInfo->IOTRaFunc &= HT_IOT_RAFUNC_DISABLE_ALL;
+
+	if(pHTInfo->IOTPeer == HT_IOT_PEER_RALINK && !bPeerRx2ss)
+		pHTInfo->IOTRaFunc |= HT_IOT_RAFUNC_PEER_1R;
+
+	if(pHTInfo->IOTAction & HT_IOT_ACT_AMSDU_ENABLE)
+		pHTInfo->IOTRaFunc |= HT_IOT_RAFUNC_TX_AMSDU;
+
+	printk("!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = %8.8x\n", pHTInfo->IOTRaFunc);
+}
+
+
+u8
+HTIOTActIsDisableTx40MHz(struct ieee80211_device* ieee,struct ieee80211_network *network)
+{
+	u8	retValue = 0;
+
+#if (defined RTL8192SU || defined RTL8192SE)
+	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
+	if(	(KEY_TYPE_WEP104 == ieee->pairwise_key_type) ||
+		(KEY_TYPE_WEP40 == ieee->pairwise_key_type) ||
+		(KEY_TYPE_WEP104 == ieee->group_key_type) ||
+		(KEY_TYPE_WEP40 == ieee->group_key_type) ||
+		(KEY_TYPE_TKIP == ieee->pairwise_key_type) )
+	{
+		if((pHTInfo->IOTPeer==HT_IOT_PEER_REALTEK) && (network->bssht.bdSupportHT))
+			retValue = 1;
+	}
+#endif
+
+	return retValue;
+}
+
+u8
+HTIOTActIsTxNoAggregation(struct ieee80211_device* ieee,struct ieee80211_network *network)
+{
+	u8 retValue = 0;
+
+#if (defined RTL8192SU || defined RTL8192SE)
+	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
+	if(	(KEY_TYPE_WEP104 == ieee->pairwise_key_type) ||
+		(KEY_TYPE_WEP40 == ieee->pairwise_key_type) ||
+		(KEY_TYPE_WEP104 == ieee->group_key_type) ||
+		(KEY_TYPE_WEP40 == ieee->group_key_type) ||
+		(KEY_TYPE_TKIP == ieee->pairwise_key_type) )
+	{
+		if(pHTInfo->IOTPeer==HT_IOT_PEER_REALTEK ||
+		    pHTInfo->IOTPeer==HT_IOT_PEER_UNKNOWN)
+			retValue = 1;
+	}
+#endif
+
+	return retValue;
+}
+
+
+u8
+HTIOTActIsDisableTx2SS(struct ieee80211_device* ieee,struct ieee80211_network *network)
+{
+	u8	retValue = 0;
+
+#if (defined RTL8192SU || defined RTL8192SE)
+	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
+	if(	(KEY_TYPE_WEP104 == ieee->pairwise_key_type) ||
+		(KEY_TYPE_WEP40 == ieee->pairwise_key_type) ||
+		(KEY_TYPE_WEP104 == ieee->group_key_type) ||
+		(KEY_TYPE_WEP40 == ieee->group_key_type) ||
+		(KEY_TYPE_TKIP == ieee->pairwise_key_type) )
+	{
+		if((pHTInfo->IOTPeer==HT_IOT_PEER_REALTEK) && (network->bssht.bdSupportHT))
+			retValue = 1;
+	}
+#endif
+
+	return retValue;
+}
+
+
+bool HTIOCActAllowPeerAggOnePacket(struct ieee80211_device* ieee,struct ieee80211_network *network)
+{
+	bool 	retValue = false;
+#if defined(RTL8192SE) || defined(RTL8192SU)
+	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
+	{
+		if(pHTInfo->IOTPeer == HT_IOT_PEER_MARVELL)
+			return true;
+
+	}
+#endif
+	return retValue;
+}
+
+void HTResetIOTSetting(
+	PRT_HIGH_THROUGHPUT		pHTInfo
+)
+{
+	pHTInfo->IOTAction = 0;
+	pHTInfo->IOTPeer = HT_IOT_PEER_UNKNOWN;
+	pHTInfo->IOTRaFunc = 0;
+}
+
+
+/********************************************************************************************************************
+ *function:  Construct Capablility Element in Beacon... if HTEnable is turned on
+ *   input:  struct ieee80211_device* 	ieee
+ *   	     u8* 			posHTCap //pointer to store Capability Ele
+ *   	     u8*			len //store length of CE
+ *   	     u8				IsEncrypt //whether encrypt, needed further
+ *  output:  none
+ *  return:  none
+ *  notice:  posHTCap can't be null and should be initialized before.
+  * *****************************************************************************************************************/
+void HTConstructCapabilityElement(struct ieee80211_device* ieee, u8* posHTCap, u8* len, u8 IsEncrypt)
+{
+	PRT_HIGH_THROUGHPUT	pHT = ieee->pHTInfo;
+	PHT_CAPABILITY_ELE 	pCapELE = NULL;
+	//u8 bIsDeclareMCS13;
+
+	if ((posHTCap == NULL) || (pHT == NULL))
+	{
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, "posHTCap or pHTInfo can't be null in HTConstructCapabilityElement()\n");
+		return;
+	}
+	memset(posHTCap, 0, *len);
+	if(pHT->ePeerHTSpecVer == HT_SPEC_VER_EWC)
+	{
+		u8	EWC11NHTCap[] = {0x00, 0x90, 0x4c, 0x33};	// For 11n EWC definition, 2007.07.17, by Emily
+		memcpy(posHTCap, EWC11NHTCap, sizeof(EWC11NHTCap));
+		pCapELE = (PHT_CAPABILITY_ELE)&(posHTCap[4]);
+	}else
+	{
+		pCapELE = (PHT_CAPABILITY_ELE)posHTCap;
+	}
+
+
+	//HT capability info
+	pCapELE->AdvCoding 		= 0; // This feature is not supported now!!
+	if(ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))
+	{
+		pCapELE->ChlWidth = 0;
+	}
+	else
+	{
+		pCapELE->ChlWidth = (pHT->bRegBW40MHz?1:0);
+	}
+
+//	pCapELE->ChlWidth 		= (pHT->bRegBW40MHz?1:0);
+	pCapELE->MimoPwrSave 		= pHT->SelfMimoPs;
+	pCapELE->GreenField		= 0; // This feature is not supported now!!
+	pCapELE->ShortGI20Mhz		= 1; // We can receive Short GI!!
+	pCapELE->ShortGI40Mhz		= 1; // We can receive Short GI!!
+	//DbgPrint("TX HT cap/info ele BW=%d SG20=%d SG40=%d\n\r",
+		//pCapELE->ChlWidth, pCapELE->ShortGI20Mhz, pCapELE->ShortGI40Mhz);
+	pCapELE->TxSTBC 		= 1;
+	pCapELE->RxSTBC 		= 0;
+	pCapELE->DelayBA		= 0;	// Do not support now!!
+	pCapELE->MaxAMSDUSize	= (MAX_RECEIVE_BUFFER_SIZE>=7935)?1:0;
+	pCapELE->DssCCk 		= ((pHT->bRegBW40MHz)?(pHT->bRegSuppCCK?1:0):0);
+	pCapELE->PSMP			= 0; // Do not support now!!
+	pCapELE->LSigTxopProtect	= 0; // Do not support now!!
+
+
+	//MAC HT parameters info
+        // TODO: Nedd to take care of this part
+	IEEE80211_DEBUG(IEEE80211_DL_HT, "TX HT cap/info ele BW=%d MaxAMSDUSize:%d DssCCk:%d\n", pCapELE->ChlWidth, pCapELE->MaxAMSDUSize, pCapELE->DssCCk);
+
+	if( IsEncrypt)
+	{
+		pCapELE->MPDUDensity 	= 7; // 8us
+		pCapELE->MaxRxAMPDUFactor 	= 2; // 2 is for 32 K and 3 is 64K
+	}
+	else
+	{
+		pCapELE->MaxRxAMPDUFactor 	= 3; // 2 is for 32 K and 3 is 64K
+		pCapELE->MPDUDensity 	= 0; // no density
+	}
+
+	//Supported MCS set
+	memcpy(pCapELE->MCS, ieee->Regdot11HTOperationalRateSet, 16);
+	if(pHT->IOTAction & HT_IOT_ACT_DISABLE_MCS15)
+		pCapELE->MCS[1] &= 0x7f;
+
+	if(pHT->IOTAction & HT_IOT_ACT_DISABLE_MCS14)
+		pCapELE->MCS[1] &= 0xbf;
+
+	if(pHT->IOTAction & HT_IOT_ACT_DISABLE_ALL_2SS)
+		pCapELE->MCS[1] &= 0x00;
+
+	// 2008.06.12
+	// For RTL819X, if pairwisekey = wep/tkip, ap is ralink, we support only MCS0~7.
+	if(ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))
+	{
+		int i;
+		for(i = 1; i< 16; i++)
+			pCapELE->MCS[i] = 0;
+	}
+
+	//Extended HT Capability Info
+	memset(&pCapELE->ExtHTCapInfo, 0, 2);
+
+
+	//TXBF Capabilities
+	memset(pCapELE->TxBFCap, 0, 4);
+
+	//Antenna Selection Capabilities
+	pCapELE->ASCap = 0;
+//add 2 to give space for element ID and len when construct frames
+	if(pHT->ePeerHTSpecVer == HT_SPEC_VER_EWC)
+		*len = 30 + 2;
+	else
+		*len = 26 + 2;
+
+
+
+//	IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA | IEEE80211_DL_HT, posHTCap, *len -2);
+
+	//Print each field in detail. Driver should not print out this message by default
+//	HTDebugHTCapability(posHTCap, (u8*)"HTConstructCapability()");
+	return;
+
+}
+/********************************************************************************************************************
+ *function:  Construct  Information Element in Beacon... if HTEnable is turned on
+ *   input:  struct ieee80211_device* 	ieee
+ *   	     u8* 			posHTCap //pointer to store Information Ele
+ *   	     u8*			len   //store len of
+ *   	     u8				IsEncrypt //whether encrypt, needed further
+ *  output:  none
+ *  return:  none
+ *  notice:  posHTCap can't be null and be initialized before. only AP and IBSS sta should do this
+  * *****************************************************************************************************************/
+void HTConstructInfoElement(struct ieee80211_device* ieee, u8* posHTInfo, u8* len, u8 IsEncrypt)
+{
+	PRT_HIGH_THROUGHPUT	pHT = ieee->pHTInfo;
+	PHT_INFORMATION_ELE		pHTInfoEle = (PHT_INFORMATION_ELE)posHTInfo;
+	if ((posHTInfo == NULL) || (pHTInfoEle == NULL))
+	{
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, "posHTInfo or pHTInfoEle can't be null in HTConstructInfoElement()\n");
+		return;
+	}
+
+	memset(posHTInfo, 0, *len);
+	if ( (ieee->iw_mode == IW_MODE_ADHOC) || (ieee->iw_mode == IW_MODE_MASTER)) //ap mode is not currently supported
+	{
+		pHTInfoEle->ControlChl 			= ieee->current_network.channel;
+		pHTInfoEle->ExtChlOffset 			= ((pHT->bRegBW40MHz == false)?HT_EXTCHNL_OFFSET_NO_EXT:
+											(ieee->current_network.channel<=6)?
+												HT_EXTCHNL_OFFSET_UPPER:HT_EXTCHNL_OFFSET_LOWER);
+		pHTInfoEle->RecommemdedTxWidth	= pHT->bRegBW40MHz;
+		pHTInfoEle->RIFS 					= 0;
+		pHTInfoEle->PSMPAccessOnly		= 0;
+		pHTInfoEle->SrvIntGranularity		= 0;
+		pHTInfoEle->OptMode				= pHT->CurrentOpMode;
+		pHTInfoEle->NonGFDevPresent		= 0;
+		pHTInfoEle->DualBeacon			= 0;
+		pHTInfoEle->SecondaryBeacon		= 0;
+		pHTInfoEle->LSigTxopProtectFull		= 0;
+		pHTInfoEle->PcoActive				= 0;
+		pHTInfoEle->PcoPhase				= 0;
+
+		memset(pHTInfoEle->BasicMSC, 0, 16);
+
+
+		*len = 22 + 2; //same above
+
+	}
+	else
+	{
+		//STA should not generate High Throughput Information Element
+		*len = 0;
+	}
+	//IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA | IEEE80211_DL_HT, posHTInfo, *len - 2);
+	//HTDebugHTInfo(posHTInfo, "HTConstructInforElement");
+	return;
+}
+
+/*
+  *  According to experiment, Realtek AP to STA (based on rtl8190) may achieve best performance
+  *  if both STA and AP set limitation of aggregation size to 32K, that is, set AMPDU density to 2
+  *  (Ref: IEEE 11n specification). However, if Realtek STA associates to other AP, STA should set
+  *  limitation of aggregation size to 8K, otherwise, performance of traffic stream from STA to AP
+  *  will be much less than the traffic stream from AP to STA if both of the stream runs concurrently
+  *  at the same time.
+  *
+  *  Frame Format
+  *  Element ID		Length		OUI			Type1		Reserved
+  *  1 byte			1 byte		3 bytes		1 byte		1 byte
+  *
+  *  OUI 		= 0x00, 0xe0, 0x4c,
+  *  Type 	= 0x02
+  *  Reserved 	= 0x00
+  *
+  *  2007.8.21 by Emily
+*/
+/********************************************************************************************************************
+ *function:  Construct  Information Element in Beacon... in RT2RT condition
+ *   input:  struct ieee80211_device* 	ieee
+ *   	     u8* 			posRT2RTAgg //pointer to store Information Ele
+ *   	     u8*			len   //store len
+ *  output:  none
+ *  return:  none
+ *  notice:
+  * *****************************************************************************************************************/
+void HTConstructRT2RTAggElement(struct ieee80211_device* ieee, u8* posRT2RTAgg, u8* len)
+{
+	if (posRT2RTAgg == NULL) {
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, "posRT2RTAgg can't be null in HTConstructRT2RTAggElement()\n");
+		return;
+	}
+	memset(posRT2RTAgg, 0, *len);
+	*posRT2RTAgg++ = 0x00;
+	*posRT2RTAgg++ = 0xe0;
+	*posRT2RTAgg++ = 0x4c;
+	*posRT2RTAgg++ = 0x02;
+	*posRT2RTAgg++ = 0x01;
+	*posRT2RTAgg = 0x10;//*posRT2RTAgg = 0x02;
+
+	if(ieee->bSupportRemoteWakeUp) {
+		*posRT2RTAgg |= 0x08;//RT_HT_CAP_USE_WOW;
+	}
+
+	*len = 6 + 2;
+	return;
+#ifdef TODO
+#if(HAL_CODE_BASE == RTL8192 && DEV_BUS_TYPE == USB_INTERFACE)
+	/*
+	//Emily. If it is required to Ask Realtek AP to send AMPDU during AES mode, enable this
+	   section of code.
+	if(IS_UNDER_11N_AES_MODE(Adapter))
+	{
+		posRT2RTAgg->Octet[5] |=RT_HT_CAP_USE_AMPDU;
+	}else
+	{
+		posRT2RTAgg->Octet[5] &= 0xfb;
+	}
+	*/
+
+#else
+	// Do Nothing
+#endif
+
+	posRT2RTAgg->Length = 6;
+#endif
+
+
+
+
+}
+
+
+/********************************************************************************************************************
+ *function:  Pick the right Rate Adaptive table to use
+ *   input:  struct ieee80211_device* 	ieee
+ *   	     u8* 			pOperateMCS //A pointer to MCS rate bitmap
+ *  return:  always we return true
+ *  notice:
+  * *****************************************************************************************************************/
+u8 HT_PickMCSRate(struct ieee80211_device* ieee, u8* pOperateMCS)
+{
+	u8					i;
+	if (pOperateMCS == NULL)
+	{
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, "pOperateMCS can't be null in HT_PickMCSRate()\n");
+		return false;
+	}
+
+	switch(ieee->mode)
+	{
+	case IEEE_A:
+	case IEEE_B:
+	case IEEE_G:
+			//legacy rate routine handled at selectedrate
+
+			//no MCS rate
+			for(i=0;i<=15;i++){
+				pOperateMCS[i] = 0;
+			}
+			break;
+
+	case IEEE_N_24G:	//assume CCK rate ok
+	case IEEE_N_5G:
+			// Legacy part we only use 6, 5.5,2,1 for N_24G and 6 for N_5G.
+			// Legacy part shall be handled at SelectRateSet().
+
+			//HT part
+			// TODO: may be different if we have different number of antenna
+			pOperateMCS[0] &=RATE_ADPT_1SS_MASK;	//support MCS 0~7
+			pOperateMCS[1] &=RATE_ADPT_2SS_MASK;
+			pOperateMCS[3] &=RATE_ADPT_MCS32_MASK;
+			break;
+
+	//should never reach here
+	default:
+
+			break;
+
+	}
+
+	return true;
+}
+
+/*
+*	Description:
+*		This function will get the highest speed rate in input MCS set.
+*
+*	/param 	Adapter			Pionter to Adapter entity
+*			pMCSRateSet		Pointer to MCS rate bitmap
+*			pMCSFilter		Pointer to MCS rate filter
+*
+*	/return	Highest MCS rate included in pMCSRateSet and filtered by pMCSFilter.
+*
+*/
+/********************************************************************************************************************
+ *function:  This function will get the highest speed rate in input MCS set.
+ *   input:  struct ieee80211_device* 	ieee
+ *   	     u8* 			pMCSRateSet //Pointer to MCS rate bitmap
+ *   	     u8*			pMCSFilter //Pointer to MCS rate filter
+ *  return:  Highest MCS rate included in pMCSRateSet and filtered by pMCSFilter
+ *  notice:
+  * *****************************************************************************************************************/
+u8 HTGetHighestMCSRate(struct ieee80211_device* ieee, u8* pMCSRateSet, u8* pMCSFilter)
+{
+	u8		i, j;
+	u8		bitMap;
+	u8		mcsRate = 0;
+	u8		availableMcsRate[16];
+	if (pMCSRateSet == NULL || pMCSFilter == NULL)
+	{
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, "pMCSRateSet or pMCSFilter can't be null in HTGetHighestMCSRate()\n");
+		return false;
+	}
+	for(i=0; i<16; i++)
+		availableMcsRate[i] = pMCSRateSet[i] & pMCSFilter[i];
+
+	for(i = 0; i < 16; i++)
+	{
+		if(availableMcsRate[i] != 0)
+			break;
+	}
+	if(i == 16)
+		return false;
+
+	for(i = 0; i < 16; i++)
+	{
+		if(availableMcsRate[i] != 0)
+		{
+			bitMap = availableMcsRate[i];
+			for(j = 0; j < 8; j++)
+			{
+				if((bitMap%2) != 0)
+				{
+					if(HTMcsToDataRate(ieee, (8*i+j)) > HTMcsToDataRate(ieee, mcsRate))
+						mcsRate = (8*i+j);
+				}
+				bitMap = bitMap>>1;
+			}
+		}
+	}
+	return (mcsRate|0x80);
+}
+
+
+
+/*
+**
+**1.Filter our operation rate set with AP's rate set
+**2.shall reference channel bandwidth, STBC, Antenna number
+**3.generate rate adative table for firmware
+**David 20060906
+**
+** \pHTSupportedCap: the connected STA's supported rate Capability element
+*/
+u8 HTFilterMCSRate( struct ieee80211_device* ieee, u8* pSupportMCS, u8* pOperateMCS)
+{
+
+	u8 i=0;
+
+	// filter out operational rate set not supported by AP, the lenth of it is 16
+	for(i=0;i<=15;i++){
+		pOperateMCS[i] = ieee->Regdot11HTOperationalRateSet[i]&pSupportMCS[i];
+	}
+
+
+	// TODO: adjust our operational rate set  according to our channel bandwidth, STBC and Antenna number
+
+	// TODO: fill suggested rate adaptive rate index and give firmware info using Tx command packet
+	// we also shall suggested the first start rate set according to our singal strength
+	HT_PickMCSRate(ieee, pOperateMCS);
+
+	// For RTL819X, if pairwisekey = wep/tkip, we support only MCS0~7.
+	if(ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))
+		pOperateMCS[1] = 0;
+
+	//
+	// For RTL819X, we support only MCS0~15.
+	// And also, we do not know how to use MCS32 now.
+	//
+	for(i=2; i<=15; i++)
+		pOperateMCS[i] = 0;
+
+	return true;
+}
+void HTSetConnectBwMode(struct ieee80211_device* ieee, HT_CHANNEL_WIDTH	Bandwidth, HT_EXTCHNL_OFFSET	Offset);
+#if 0
+//I need move this function to other places, such as rx?
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+void HTOnAssocRsp_wq(struct work_struct *work)
+{
+	struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, ht_onAssRsp);
+#else
+void HTOnAssocRsp_wq(struct ieee80211_device *ieee)
+{
+#endif
+#endif
+void HTOnAssocRsp(struct ieee80211_device *ieee)
+{
+	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
+	PHT_CAPABILITY_ELE		pPeerHTCap = NULL;
+	PHT_INFORMATION_ELE		pPeerHTInfo = NULL;
+	u16	nMaxAMSDUSize = 0;
+	u8*	pMcsFilter = NULL;
+
+	static u8				EWC11NHTCap[] = {0x00, 0x90, 0x4c, 0x33};		// For 11n EWC definition, 2007.07.17, by Emily
+	static u8				EWC11NHTInfo[] = {0x00, 0x90, 0x4c, 0x34};	// For 11n EWC definition, 2007.07.17, by Emily
+
+	if( pHTInfo->bCurrentHTSupport == false )
+	{
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, "<=== HTOnAssocRsp(): HT_DISABLE\n");
+		return;
+	}
+	IEEE80211_DEBUG(IEEE80211_DL_HT, "===> HTOnAssocRsp_wq(): HT_ENABLE\n");
+//	IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, pHTInfo->PeerHTCapBuf, sizeof(HT_CAPABILITY_ELE));
+//	IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, pHTInfo->PeerHTInfoBuf, sizeof(HT_INFORMATION_ELE));
+
+//	HTDebugHTCapability(pHTInfo->PeerHTCapBuf,"HTOnAssocRsp_wq");
+//	HTDebugHTInfo(pHTInfo->PeerHTInfoBuf,"HTOnAssocRsp_wq");
+	//
+	if(!memcmp(pHTInfo->PeerHTCapBuf,EWC11NHTCap, sizeof(EWC11NHTCap)))
+		pPeerHTCap = (PHT_CAPABILITY_ELE)(&pHTInfo->PeerHTCapBuf[4]);
+	else
+		pPeerHTCap = (PHT_CAPABILITY_ELE)(pHTInfo->PeerHTCapBuf);
+
+	if(!memcmp(pHTInfo->PeerHTInfoBuf, EWC11NHTInfo, sizeof(EWC11NHTInfo)))
+		pPeerHTInfo = (PHT_INFORMATION_ELE)(&pHTInfo->PeerHTInfoBuf[4]);
+	else
+		pPeerHTInfo = (PHT_INFORMATION_ELE)(pHTInfo->PeerHTInfoBuf);
+
+
+	////////////////////////////////////////////////////////
+	// Configurations:
+	////////////////////////////////////////////////////////
+	IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_HT, pPeerHTCap, sizeof(HT_CAPABILITY_ELE));
+//	IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_HT, pPeerHTInfo, sizeof(HT_INFORMATION_ELE));
+	// Config Supported Channel Width setting
+	//
+	HTSetConnectBwMode(ieee, (HT_CHANNEL_WIDTH)(pPeerHTCap->ChlWidth), (HT_EXTCHNL_OFFSET)(pPeerHTInfo->ExtChlOffset));
+
+//	if(pHTInfo->bCurBW40MHz == true)
+		pHTInfo->bCurTxBW40MHz = ((pPeerHTInfo->RecommemdedTxWidth == 1)?true:false);
+
+	//
+	// Update short GI/ long GI setting
+	//
+	// TODO:
+	pHTInfo->bCurShortGI20MHz=
+		((pHTInfo->bRegShortGI20MHz)?((pPeerHTCap->ShortGI20Mhz==1)?true:false):false);
+	pHTInfo->bCurShortGI40MHz=
+		((pHTInfo->bRegShortGI40MHz)?((pPeerHTCap->ShortGI40Mhz==1)?true:false):false);
+
+	//
+	// Config TX STBC setting
+	//
+	// TODO:
+
+	//
+	// Config DSSS/CCK  mode in 40MHz mode
+	//
+	// TODO:
+	pHTInfo->bCurSuppCCK =
+		((pHTInfo->bRegSuppCCK)?((pPeerHTCap->DssCCk==1)?true:false):false);
+
+
+	//
+	// Config and configure A-MSDU setting
+	//
+	pHTInfo->bCurrent_AMSDU_Support = pHTInfo->bAMSDU_Support;
+
+	nMaxAMSDUSize = (pPeerHTCap->MaxAMSDUSize==0)?3839:7935;
+
+	if(pHTInfo->nAMSDU_MaxSize > nMaxAMSDUSize )
+		pHTInfo->nCurrent_AMSDU_MaxSize = nMaxAMSDUSize;
+	else
+		pHTInfo->nCurrent_AMSDU_MaxSize = pHTInfo->nAMSDU_MaxSize;
+
+	//
+	// Config A-MPDU setting
+	//
+	pHTInfo->bCurrentAMPDUEnable = pHTInfo->bAMPDUEnable;
+	if(ieee->is_ap_in_wep_tkip && ieee->is_ap_in_wep_tkip(ieee->dev))
+	{
+		if( (pHTInfo->IOTPeer== HT_IOT_PEER_ATHEROS) ||
+				(pHTInfo->IOTPeer == HT_IOT_PEER_UNKNOWN) )
+			pHTInfo->bCurrentAMPDUEnable = false;
+	}
+
+	// <1> Decide AMPDU Factor
+
+	// By Emily
+	if(!pHTInfo->bRegRT2RTAggregation)
+	{
+		// Decide AMPDU Factor according to protocol handshake
+		if(pHTInfo->AMPDU_Factor > pPeerHTCap->MaxRxAMPDUFactor)
+			pHTInfo->CurrentAMPDUFactor = pPeerHTCap->MaxRxAMPDUFactor;
+		else
+			pHTInfo->CurrentAMPDUFactor = pHTInfo->AMPDU_Factor;
+
+	}else
+	{
+		// Set MPDU density to 2 to Realtek AP, and set it to 0 for others
+		// Replace MPDU factor declared in original association response frame format. 2007.08.20 by Emily
+#if 0
+		osTmp= PacketGetElement( asocpdu, EID_Vendor, OUI_SUB_REALTEK_AGG, OUI_SUBTYPE_DONT_CARE);
+		if(osTmp.Length >= 5)	//00:e0:4c:02:00
+#endif
+		if (ieee->current_network.bssht.bdRT2RTAggregation)
+		{
+			if( ieee->pairwise_key_type != KEY_TYPE_NA)
+				// Realtek may set 32k in security mode and 64k for others
+				pHTInfo->CurrentAMPDUFactor = pPeerHTCap->MaxRxAMPDUFactor;
+			else
+				pHTInfo->CurrentAMPDUFactor = HT_AGG_SIZE_64K;
+		}else
+		{
+			if(pPeerHTCap->MaxRxAMPDUFactor < HT_AGG_SIZE_32K)
+				pHTInfo->CurrentAMPDUFactor = pPeerHTCap->MaxRxAMPDUFactor;
+			else
+				pHTInfo->CurrentAMPDUFactor = HT_AGG_SIZE_32K;
+		}
+	}
+
+	// <2> Set AMPDU Minimum MPDU Start Spacing
+	// 802.11n 3.0 section 9.7d.3
+#if 1
+	if(pHTInfo->MPDU_Density > pPeerHTCap->MPDUDensity)
+		pHTInfo->CurrentMPDUDensity = pHTInfo->MPDU_Density;
+	else
+		pHTInfo->CurrentMPDUDensity = pPeerHTCap->MPDUDensity;
+	if(ieee->pairwise_key_type != KEY_TYPE_NA )
+		pHTInfo->CurrentMPDUDensity 	= 7; // 8us
+#else
+	if(pHTInfo->MPDU_Density > pPeerHTCap->MPDUDensity)
+		pHTInfo->CurrentMPDUDensity = pHTInfo->MPDU_Density;
+	else
+		pHTInfo->CurrentMPDUDensity = pPeerHTCap->MPDUDensity;
+#endif
+	// Force TX AMSDU
+
+	// Lanhsin: mark for tmp to avoid deauth by ap from  s3
+	//if(memcmp(pMgntInfo->Bssid, NETGEAR834Bv2_BROADCOM, 3)==0)
+	if(pHTInfo->IOTAction & HT_IOT_ACT_TX_USE_AMSDU_8K)
+		{
+
+			pHTInfo->bCurrentAMPDUEnable = false;
+			pHTInfo->ForcedAMSDUMode = HT_AGG_FORCE_ENABLE;
+			pHTInfo->ForcedAMSDUMaxSize = 7935;
+	}
+
+	// Rx Reorder Setting
+	pHTInfo->bCurRxReorderEnable = pHTInfo->bRegRxReorderEnable;
+
+	//
+	// Filter out unsupported HT rate for this AP
+	// Update RATR table
+	// This is only for 8190 ,8192 or later product which using firmware to handle rate adaptive mechanism.
+	//
+
+	// Handle Ralink AP bad MCS rate set condition. Joseph.
+	// This fix the bug of Ralink AP. This may be removed in the future.
+	if(pPeerHTCap->MCS[0] == 0)
+		pPeerHTCap->MCS[0] = 0xff;
+
+	// Joseph test //LZM ADD 090318
+	HTIOTActDetermineRaFunc(ieee, ((pPeerHTCap->MCS[1])!=0));
+
+	HTFilterMCSRate(ieee, pPeerHTCap->MCS, ieee->dot11HTOperationalRateSet);
+
+	//
+	// Config MIMO Power Save setting
+	//
+	pHTInfo->PeerMimoPs = pPeerHTCap->MimoPwrSave;
+	if(pHTInfo->PeerMimoPs == MIMO_PS_STATIC)
+		pMcsFilter = MCS_FILTER_1SS;
+	else
+		pMcsFilter = MCS_FILTER_ALL;
+	//WB add for MCS8 bug
+//	pMcsFilter = MCS_FILTER_1SS;
+	ieee->HTHighestOperaRate = HTGetHighestMCSRate(ieee, ieee->dot11HTOperationalRateSet, pMcsFilter);
+	ieee->HTCurrentOperaRate = ieee->HTHighestOperaRate;
+
+	//
+	// Config current operation mode.
+	//
+	pHTInfo->CurrentOpMode = pPeerHTInfo->OptMode;
+
+
+
+}
+
+void HTSetConnectBwModeCallback(struct ieee80211_device* ieee);
+/********************************************************************************************************************
+ *function:  initialize HT info(struct PRT_HIGH_THROUGHPUT)
+ *   input:  struct ieee80211_device* 	ieee
+ *  output:  none
+ *  return:  none
+ *  notice: This function is called when *  (1) MPInitialization Phase *  (2) Receiving of Deauthentication from AP
+********************************************************************************************************************/
+// TODO: Should this funciton be called when receiving of Disassociation?
+void HTInitializeHTInfo(struct ieee80211_device* ieee)
+{
+	PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
+
+	//
+	// These parameters will be reset when receiving deauthentication packet
+	//
+	IEEE80211_DEBUG(IEEE80211_DL_HT, "===========>%s()\n", __FUNCTION__);
+	pHTInfo->bCurrentHTSupport = false;
+
+	// 40MHz channel support
+	pHTInfo->bCurBW40MHz = false;
+	pHTInfo->bCurTxBW40MHz = false;
+
+	// Short GI support
+	pHTInfo->bCurShortGI20MHz = false;
+	pHTInfo->bCurShortGI40MHz = false;
+	pHTInfo->bForcedShortGI = false;
+
+	// CCK rate support
+	// This flag is set to true to support CCK rate by default.
+	// It will be affected by "pHTInfo->bRegSuppCCK" and AP capabilities only when associate to
+	// 11N BSS.
+	pHTInfo->bCurSuppCCK = true;
+
+	// AMSDU related
+	pHTInfo->bCurrent_AMSDU_Support = false;
+	pHTInfo->nCurrent_AMSDU_MaxSize = pHTInfo->nAMSDU_MaxSize;
+
+	// AMPUD related
+	pHTInfo->CurrentMPDUDensity = pHTInfo->MPDU_Density;
+	pHTInfo->CurrentAMPDUFactor = pHTInfo->AMPDU_Factor;
+
+
+
+	// Initialize all of the parameters related to 11n
+	memset((void*)(&(pHTInfo->SelfHTCap)), 0, sizeof(pHTInfo->SelfHTCap));
+	memset((void*)(&(pHTInfo->SelfHTInfo)), 0, sizeof(pHTInfo->SelfHTInfo));
+	memset((void*)(&(pHTInfo->PeerHTCapBuf)), 0, sizeof(pHTInfo->PeerHTCapBuf));
+	memset((void*)(&(pHTInfo->PeerHTInfoBuf)), 0, sizeof(pHTInfo->PeerHTInfoBuf));
+
+	pHTInfo->bSwBwInProgress = false;
+	pHTInfo->ChnlOp = CHNLOP_NONE;
+
+	// Set default IEEE spec for Draft N
+	pHTInfo->ePeerHTSpecVer = HT_SPEC_VER_IEEE;
+
+	// Realtek proprietary aggregation mode
+	pHTInfo->bCurrentRT2RTAggregation = false;
+	pHTInfo->bCurrentRT2RTLongSlotTime = false;
+	pHTInfo->RT2RT_HT_Mode = (RT_HT_CAPBILITY)0;
+
+	pHTInfo->IOTPeer = 0;
+	pHTInfo->IOTAction = 0;
+	pHTInfo->IOTRaFunc = 0;
+
+	//MCS rate initialized here
+	{
+		u8* RegHTSuppRateSets = &(ieee->RegHTSuppRateSet[0]);
+		RegHTSuppRateSets[0] = 0xFF;	//support MCS 0~7
+		RegHTSuppRateSets[1] = 0xFF;	//support MCS 8~15
+		RegHTSuppRateSets[4] = 0x01;	//support MCS 32
+	}
+}
+/********************************************************************************************************************
+ *function:  initialize Bss HT structure(struct PBSS_HT)
+ *   input:  PBSS_HT pBssHT //to be initialized
+ *  output:  none
+ *  return:  none
+ *  notice: This function is called when initialize network structure
+********************************************************************************************************************/
+void HTInitializeBssDesc(PBSS_HT pBssHT)
+{
+
+	pBssHT->bdSupportHT = false;
+	memset(pBssHT->bdHTCapBuf, 0, sizeof(pBssHT->bdHTCapBuf));
+	pBssHT->bdHTCapLen = 0;
+	memset(pBssHT->bdHTInfoBuf, 0, sizeof(pBssHT->bdHTInfoBuf));
+	pBssHT->bdHTInfoLen = 0;
+
+	pBssHT->bdHTSpecVer= HT_SPEC_VER_IEEE;
+
+	pBssHT->bdRT2RTAggregation = false;
+	pBssHT->bdRT2RTLongSlotTime = false;
+	pBssHT->RT2RT_HT_Mode = (RT_HT_CAPBILITY)0;
+}
+#if 0
+//below function has merged into ieee80211_network_init() in ieee80211_rx.c
+void
+HTParsingHTCapElement(
+	IN	PADAPTER		Adapter,
+	IN	OCTET_STRING	HTCapIE,
+	OUT	PRT_WLAN_BSS	pBssDesc
+)
+{
+	PMGNT_INFO      			pMgntInfo = &Adapter->MgntInfo;
+
+	if( HTCapIE.Length > sizeof(pBssDesc->BssHT.bdHTCapBuf) )
+	{
+		RT_TRACE( COMP_HT, DBG_LOUD, ("HTParsingHTCapElement(): HT Capability Element length is too long!\n") );
+		return;
+	}
+
+	// TODO: Check the correctness of HT Cap
+	//Print each field in detail. Driver should not print out this message by default
+	if(!pMgntInfo->mActingAsAp && !pMgntInfo->mAssoc)
+		HTDebugHTCapability(DBG_TRACE, Adapter, &HTCapIE, (pu8)"HTParsingHTCapElement()");
+
+	HTCapIE.Length = HTCapIE.Length > sizeof(pBssDesc->BssHT.bdHTCapBuf)?\
+		sizeof(pBssDesc->BssHT.bdHTCapBuf):HTCapIE.Length;	//prevent from overflow
+
+	CopyMem(pBssDesc->BssHT.bdHTCapBuf, HTCapIE.Octet, HTCapIE.Length);
+	pBssDesc->BssHT.bdHTCapLen = HTCapIE.Length;
+
+}
+
+
+void
+HTParsingHTInfoElement(
+	PADAPTER		Adapter,
+	OCTET_STRING	HTInfoIE,
+	PRT_WLAN_BSS	pBssDesc
+)
+{
+	PMGNT_INFO      			pMgntInfo = &Adapter->MgntInfo;
+
+	if( HTInfoIE.Length > sizeof(pBssDesc->BssHT.bdHTInfoBuf))
+	{
+		RT_TRACE( COMP_HT, DBG_LOUD, ("HTParsingHTInfoElement(): HT Information Element length is too long!\n") );
+		return;
+	}
+
+	// TODO: Check the correctness of HT Info
+	//Print each field in detail. Driver should not print out this message by default
+	if(!pMgntInfo->mActingAsAp && !pMgntInfo->mAssoc)
+		HTDebugHTInfo(DBG_TRACE, Adapter, &HTInfoIE, (pu8)"HTParsingHTInfoElement()");
+
+	HTInfoIE.Length = HTInfoIE.Length > sizeof(pBssDesc->BssHT.bdHTInfoBuf)?\
+		sizeof(pBssDesc->BssHT.bdHTInfoBuf):HTInfoIE.Length;	//prevent from overflow
+
+	CopyMem( pBssDesc->BssHT.bdHTInfoBuf, HTInfoIE.Octet, HTInfoIE.Length);
+	pBssDesc->BssHT.bdHTInfoLen = HTInfoIE.Length;
+}
+
+/*
+  * Get HT related information from beacon and save it in BssDesc
+  *
+  * (1) Parse HTCap, and HTInfo, and record whether it is 11n AP
+  * (2) If peer is HT, but not WMM, call QosSetLegacyWMMParamWithHT()
+  * (3) Check whether peer is Realtek AP (for Realtek proprietary aggregation mode).
+  * Input:
+  * 		PADAPTER	Adapter
+  *
+  * Output:
+  *		PRT_TCB		BssDesc
+  *
+*/
+void HTGetValueFromBeaconOrProbeRsp(
+	PADAPTER			Adapter,
+	POCTET_STRING		pSRCmmpdu,
+	PRT_WLAN_BSS		bssDesc
+)
+{
+	PMGNT_INFO      			pMgntInfo = &Adapter->MgntInfo;
+	PRT_HIGH_THROUGHPUT		pHTInfo = GET_HT_INFO(pMgntInfo);
+	OCTET_STRING				HTCapIE, HTInfoIE, HTRealtekAgg, mmpdu;
+	OCTET_STRING				BroadcomElement, CiscoElement;
+
+	mmpdu.Octet = pSRCmmpdu->Octet;
+	mmpdu.Length = pSRCmmpdu->Length;
+
+	//2Note:
+	//   Mark for IOT testing using  Linksys WRT350N, This AP does not contain WMM IE  when
+	//   it is configured at pure-N mode.
+	//	if(bssDesc->BssQos.bdQoSMode & QOS_WMM)
+	//
+
+	HTInitializeBssDesc (&bssDesc->BssHT);
+
+	//2<1> Parse HTCap, and HTInfo
+	// Get HT Capability IE: (1) Get IEEE Draft N IE or (2) Get EWC IE
+	HTCapIE = PacketGetElement(mmpdu, EID_HTCapability, OUI_SUB_DONT_CARE, OUI_SUBTYPE_DONT_CARE);
+	if(HTCapIE.Length == 0)
+	{
+		HTCapIE = PacketGetElement(mmpdu, EID_Vendor, OUI_SUB_11N_EWC_HT_CAP, OUI_SUBTYPE_DONT_CARE);
+		if(HTCapIE.Length != 0)
+			bssDesc->BssHT.bdHTSpecVer= HT_SPEC_VER_EWC;
+	}
+	if(HTCapIE.Length != 0)
+		HTParsingHTCapElement(Adapter, HTCapIE, bssDesc);
+
+	// Get HT Information IE: (1) Get IEEE Draft N IE or (2) Get EWC IE
+	HTInfoIE = PacketGetElement(mmpdu, EID_HTInfo, OUI_SUB_DONT_CARE, OUI_SUBTYPE_DONT_CARE);
+	if(HTInfoIE.Length == 0)
+	{
+		HTInfoIE = PacketGetElement(mmpdu, EID_Vendor, OUI_SUB_11N_EWC_HT_INFO, OUI_SUBTYPE_DONT_CARE);
+		if(HTInfoIE.Length != 0)
+				bssDesc->BssHT.bdHTSpecVer  = HT_SPEC_VER_EWC;
+	}
+	if(HTInfoIE.Length != 0)
+		HTParsingHTInfoElement(Adapter, HTInfoIE, bssDesc);
+
+	//2<2>If peer is HT, but not WMM, call QosSetLegacyWMMParamWithHT()
+	if(HTCapIE.Length != 0)
+	{
+		bssDesc->BssHT.bdSupportHT = true;
+		if(bssDesc->BssQos.bdQoSMode == QOS_DISABLE)
+			QosSetLegacyWMMParamWithHT(Adapter, bssDesc);
+	}
+	else
+	{
+		bssDesc->BssHT.bdSupportHT = false;
+	}
+
+	//2<3>Check whether the peer is Realtek AP/STA
+	if(pHTInfo->bRegRT2RTAggregation)
+	{
+		if(bssDesc->BssHT.bdSupportHT)
+		{
+			HTRealtekAgg = PacketGetElement(mmpdu, EID_Vendor, OUI_SUB_REALTEK_AGG, OUI_SUBTYPE_DONT_CARE);
+			if(HTRealtekAgg.Length >=5 )
+			{
+				bssDesc->BssHT.bdRT2RTAggregation = true;
+
+				if((HTRealtekAgg.Octet[4]==1) && (HTRealtekAgg.Octet[5] & 0x02))
+					bssDesc->BssHT.bdRT2RTLongSlotTime = true;
+			}
+		}
+	}
+
+	//
+	// 2008/01/25 MH Get Broadcom AP IE for manamgent frame CCK rate problem.
+	// AP can not receive CCK managemtn from from 92E.
+	//
+
+	// Initialize every new bss broadcom cap exist as false..
+	bssDesc->bBroadcomCapExist= false;
+
+	if(HTCapIE.Length != 0 || HTInfoIE.Length != 0)
+	{
+		u4Byte	Length = 0;
+
+		FillOctetString(BroadcomElement, NULL, 0);
+
+		BroadcomElement = PacketGetElement( mmpdu, EID_Vendor, OUI_SUB_BROADCOM_IE_1, OUI_SUBTYPE_DONT_CARE);
+		Length += BroadcomElement.Length;
+		BroadcomElement = PacketGetElement( mmpdu, EID_Vendor, OUI_SUB_BROADCOM_IE_2, OUI_SUBTYPE_DONT_CARE);
+		Length += BroadcomElement.Length;
+		BroadcomElement = PacketGetElement( mmpdu, EID_Vendor, OUI_SUB_BROADCOM_IE_3, OUI_SUBTYPE_DONT_CARE);
+		Length += BroadcomElement.Length;
+
+		if(Length > 0)
+			bssDesc->bBroadcomCapExist = true;
+	}
+
+
+	// For Cisco IOT issue
+	CiscoElement = PacketGetElement( mmpdu, EID_Vendor, OUI_SUB_CISCO_IE, OUI_SUBTYPE_DONT_CARE);
+	if(CiscoElement.Length != 0){ // 3: 0x00, 0x40, 0x96 ....
+		bssDesc->bCiscoCapExist = true;
+	}else{
+		bssDesc->bCiscoCapExist = false;
+	}
+}
+
+
+#endif
+/********************************************************************************************************************
+ *function:  initialize Bss HT structure(struct PBSS_HT)
+ *   input:  struct ieee80211_device 	*ieee
+ *   	     struct ieee80211_network 	*pNetwork //usually current network we are live in
+ *  output:  none
+ *  return:  none
+ *  notice: This function should ONLY be called before association
+********************************************************************************************************************/
+void HTResetSelfAndSavePeerSetting(struct ieee80211_device* ieee, 	struct ieee80211_network * pNetwork)
+{
+	PRT_HIGH_THROUGHPUT		pHTInfo = ieee->pHTInfo;
+//	u16						nMaxAMSDUSize;
+//	PHT_CAPABILITY_ELE		pPeerHTCap = (PHT_CAPABILITY_ELE)pNetwork->bssht.bdHTCapBuf;
+//	PHT_INFORMATION_ELE		pPeerHTInfo = (PHT_INFORMATION_ELE)pNetwork->bssht.bdHTInfoBuf;
+//	u8*	pMcsFilter;
+	u8	bIOTAction = 0;
+
+	//
+	//  Save Peer Setting before Association
+	//
+	IEEE80211_DEBUG(IEEE80211_DL_HT, "==============>%s()\n", __FUNCTION__);
+	/*unmark bEnableHT flag here is the same reason why unmarked in function ieee80211_softmac_new_net. WB 2008.09.10*/
+//	if( pHTInfo->bEnableHT &&  pNetwork->bssht.bdSupportHT)
+	if (pNetwork->bssht.bdSupportHT)
+	{
+		pHTInfo->bCurrentHTSupport = true;
+		pHTInfo->ePeerHTSpecVer = pNetwork->bssht.bdHTSpecVer;
+
+		// Save HTCap and HTInfo information Element
+		if(pNetwork->bssht.bdHTCapLen > 0 && 	pNetwork->bssht.bdHTCapLen <= sizeof(pHTInfo->PeerHTCapBuf))
+			memcpy(pHTInfo->PeerHTCapBuf, pNetwork->bssht.bdHTCapBuf, pNetwork->bssht.bdHTCapLen);
+
+		if(pNetwork->bssht.bdHTInfoLen > 0 && pNetwork->bssht.bdHTInfoLen <= sizeof(pHTInfo->PeerHTInfoBuf))
+			memcpy(pHTInfo->PeerHTInfoBuf, pNetwork->bssht.bdHTInfoBuf, pNetwork->bssht.bdHTInfoLen);
+
+		// Check whether RT to RT aggregation mode is enabled
+		if(pHTInfo->bRegRT2RTAggregation)
+		{
+			pHTInfo->bCurrentRT2RTAggregation = pNetwork->bssht.bdRT2RTAggregation;
+			pHTInfo->bCurrentRT2RTLongSlotTime = pNetwork->bssht.bdRT2RTLongSlotTime;
+			pHTInfo->RT2RT_HT_Mode = pNetwork->bssht.RT2RT_HT_Mode;
+		}
+		else
+		{
+			pHTInfo->bCurrentRT2RTAggregation = false;
+			pHTInfo->bCurrentRT2RTLongSlotTime = false;
+			pHTInfo->RT2RT_HT_Mode = (RT_HT_CAPBILITY)0;
+		}
+
+		// Determine the IOT Peer Vendor.
+		HTIOTPeerDetermine(ieee);
+
+		// Decide IOT Action
+		// Must be called after the parameter of pHTInfo->bCurrentRT2RTAggregation is decided
+		pHTInfo->IOTAction = 0;
+		bIOTAction = HTIOTActIsDisableMCS14(ieee, pNetwork->bssid);
+		if(bIOTAction)
+			pHTInfo->IOTAction |= HT_IOT_ACT_DISABLE_MCS14;
+
+		bIOTAction = HTIOTActIsDisableMCS15(ieee);
+		if(bIOTAction)
+			pHTInfo->IOTAction |= HT_IOT_ACT_DISABLE_MCS15;
+
+		bIOTAction = HTIOTActIsDisableMCSTwoSpatialStream(ieee);
+		if(bIOTAction)
+			pHTInfo->IOTAction |= HT_IOT_ACT_DISABLE_ALL_2SS;
+
+
+		bIOTAction = HTIOTActIsDisableEDCATurbo(ieee, pNetwork->bssid);
+		if(bIOTAction)
+			pHTInfo->IOTAction |= HT_IOT_ACT_DISABLE_EDCA_TURBO;
+
+		bIOTAction = HTIOTActIsMgntUseCCK6M(pNetwork);
+		if(bIOTAction)
+			pHTInfo->IOTAction |= HT_IOT_ACT_MGNT_USE_CCK_6M;
+
+		bIOTAction = HTIOTActIsCCDFsync(pNetwork->bssid);
+		if(bIOTAction)
+			pHTInfo->IOTAction |= HT_IOT_ACT_CDD_FSYNC;
+
+		bIOTAction = HTIOTActIsForcedCTS2Self(pNetwork);
+		if(bIOTAction)
+			pHTInfo->IOTAction |= HT_IOT_ACT_FORCED_CTS2SELF;
+
+		//bIOTAction = HTIOTActIsForcedRTSCTS(ieee, pNetwork);
+		//if(bIOTAction)
+		//	pHTInfo->IOTAction |= HT_IOT_ACT_FORCED_RTS;
+
+#if defined(RTL8192SU)
+		bIOTAction = HTIOCActRejcectADDBARequest(pNetwork);
+		if(bIOTAction)
+			pHTInfo->IOTAction |= HT_IOT_ACT_REJECT_ADDBA_REQ;
+#endif
+
+		bIOTAction = HTIOCActAllowPeerAggOnePacket(ieee, pNetwork);
+		if(bIOTAction)
+			pHTInfo->IOTAction |= HT_IOT_ACT_ALLOW_PEER_AGG_ONE_PKT;
+
+		bIOTAction = HTIOTActIsEDCABiasRx(ieee, pNetwork);
+		if(bIOTAction)
+			pHTInfo->IOTAction |= HT_IOT_ACT_EDCA_BIAS_ON_RX;
+
+#if defined(RTL8192SU)
+		bIOTAction = HTIOTActDisableShortGI(ieee, pNetwork);
+		if(bIOTAction)
+			pHTInfo->IOTAction |= HT_IOT_ACT_DISABLE_SHORT_GI;
+
+		bIOTAction = HTIOTActDisableHighPower(ieee, pNetwork);
+		if(bIOTAction)
+			pHTInfo->IOTAction |= HT_IOT_ACT_DISABLE_HIGH_POWER;
+#endif
+
+		bIOTAction = HTIOTActIsForcedAMSDU8K(ieee, pNetwork);
+		if(bIOTAction)
+			pHTInfo->IOTAction |= HT_IOT_ACT_TX_USE_AMSDU_8K;
+
+#if defined(RTL8192SU)
+		bIOTAction = HTIOTActIsTxNoAggregation(ieee, pNetwork);
+		if(bIOTAction)
+			pHTInfo->IOTAction |= HT_IOT_ACT_TX_NO_AGGREGATION;
+
+		bIOTAction = HTIOTActIsDisableTx40MHz(ieee, pNetwork);
+		if(bIOTAction)
+			pHTInfo->IOTAction |= HT_IOT_ACT_DISABLE_TX_40_MHZ;
+
+		bIOTAction = HTIOTActIsDisableTx2SS(ieee, pNetwork);
+		if(bIOTAction)
+			pHTInfo->IOTAction |= HT_IOT_ACT_DISABLE_TX_2SS;
+#endif
+		//must after HT_IOT_ACT_TX_NO_AGGREGATION
+		bIOTAction = HTIOTActIsForcedRTSCTS(ieee, pNetwork);
+		if(bIOTAction)
+			pHTInfo->IOTAction |= HT_IOT_ACT_FORCED_RTS;
+
+		printk("!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = %8.8x\n", pHTInfo->IOTAction);
+	}
+	else
+	{
+		pHTInfo->bCurrentHTSupport = false;
+		pHTInfo->bCurrentRT2RTAggregation = false;
+		pHTInfo->bCurrentRT2RTLongSlotTime = false;
+		pHTInfo->RT2RT_HT_Mode = (RT_HT_CAPBILITY)0;
+
+		pHTInfo->IOTAction = 0;
+		pHTInfo->IOTRaFunc = 0;
+	}
+
+}
+
+void HTUpdateSelfAndPeerSetting(struct ieee80211_device* ieee, 	struct ieee80211_network * pNetwork)
+{
+	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
+//	PHT_CAPABILITY_ELE		pPeerHTCap = (PHT_CAPABILITY_ELE)pNetwork->bssht.bdHTCapBuf;
+	PHT_INFORMATION_ELE		pPeerHTInfo = (PHT_INFORMATION_ELE)pNetwork->bssht.bdHTInfoBuf;
+
+	if(pHTInfo->bCurrentHTSupport)
+	{
+		//
+		// Config current operation mode.
+		//
+		if(pNetwork->bssht.bdHTInfoLen != 0)
+			pHTInfo->CurrentOpMode = pPeerHTInfo->OptMode;
+
+		//
+		// <TODO: Config according to OBSS non-HT STA present!!>
+		//
+	}
+}
+
+void HTUseDefaultSetting(struct ieee80211_device* ieee)
+{
+	PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
+//	u8	regBwOpMode;
+
+	if(pHTInfo->bEnableHT)
+	{
+		pHTInfo->bCurrentHTSupport = true;
+
+		pHTInfo->bCurSuppCCK = pHTInfo->bRegSuppCCK;
+
+		pHTInfo->bCurBW40MHz = pHTInfo->bRegBW40MHz;
+
+		pHTInfo->bCurShortGI20MHz= pHTInfo->bRegShortGI20MHz;
+
+		pHTInfo->bCurShortGI40MHz= pHTInfo->bRegShortGI40MHz;
+
+		pHTInfo->bCurrent_AMSDU_Support = pHTInfo->bAMSDU_Support;
+
+		pHTInfo->nCurrent_AMSDU_MaxSize = pHTInfo->nAMSDU_MaxSize;
+
+		pHTInfo->bCurrentAMPDUEnable = pHTInfo->bAMPDUEnable;
+
+		pHTInfo->CurrentAMPDUFactor = pHTInfo->AMPDU_Factor;
+
+		pHTInfo->CurrentMPDUDensity = pHTInfo->CurrentMPDUDensity;
+
+		// Set BWOpMode register
+
+		//update RATR index0
+		HTFilterMCSRate(ieee, ieee->Regdot11HTOperationalRateSet, ieee->dot11HTOperationalRateSet);
+	//function below is not implemented at all. WB
+#ifdef TODO
+		Adapter->HalFunc.InitHalRATRTableHandler( Adapter, &pMgntInfo->dot11OperationalRateSet, pMgntInfo->dot11HTOperationalRateSet);
+#endif
+		ieee->HTHighestOperaRate = HTGetHighestMCSRate(ieee, ieee->dot11HTOperationalRateSet, MCS_FILTER_ALL);
+		ieee->HTCurrentOperaRate = ieee->HTHighestOperaRate;
+
+	}
+	else
+	{
+		pHTInfo->bCurrentHTSupport = false;
+	}
+	return;
+}
+/********************************************************************************************************************
+ *function:  check whether HT control field exists
+ *   input:  struct ieee80211_device 	*ieee
+ *   	     u8*			pFrame //coming skb->data
+ *  output:  none
+ *  return:  return true if HT control field exists(false otherwise)
+ *  notice:
+********************************************************************************************************************/
+u8 HTCCheck(struct ieee80211_device* ieee, u8*	pFrame)
+{
+	if(ieee->pHTInfo->bCurrentHTSupport)
+	{
+		if( (IsQoSDataFrame(pFrame) && Frame_Order(pFrame)) == 1)
+		{
+			IEEE80211_DEBUG(IEEE80211_DL_HT, "HT CONTROL FILED EXIST!!\n");
+			return true;
+		}
+	}
+	return false;
+}
+
+//
+// This function set bandwidth mode in protocol layer.
+//
+void HTSetConnectBwMode(struct ieee80211_device* ieee, HT_CHANNEL_WIDTH	Bandwidth, HT_EXTCHNL_OFFSET	Offset)
+{
+	PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
+//	u32 flags = 0;
+
+	if(pHTInfo->bRegBW40MHz == false)
+		return;
+
+
+
+	// To reduce dummy operation
+//	if((pHTInfo->bCurBW40MHz==false && Bandwidth==HT_CHANNEL_WIDTH_20) ||
+//	   (pHTInfo->bCurBW40MHz==true && Bandwidth==HT_CHANNEL_WIDTH_20_40 && Offset==pHTInfo->CurSTAExtChnlOffset))
+//		return;
+
+//	spin_lock_irqsave(&(ieee->bw_spinlock), flags);
+	if(pHTInfo->bSwBwInProgress) {
+//		spin_unlock_irqrestore(&(ieee->bw_spinlock), flags);
+		return;
+	}
+	//if in half N mode, set to 20M bandwidth please 09.08.2008 WB.
+	if(Bandwidth==HT_CHANNEL_WIDTH_20_40 && (!ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)))
+	 {
+	 		// Handle Illegal extention channel offset!!
+		if(ieee->current_network.channel<2 && Offset==HT_EXTCHNL_OFFSET_LOWER)
+			Offset = HT_EXTCHNL_OFFSET_NO_EXT;
+		if(Offset==HT_EXTCHNL_OFFSET_UPPER || Offset==HT_EXTCHNL_OFFSET_LOWER) {
+			pHTInfo->bCurBW40MHz = true;
+			pHTInfo->CurSTAExtChnlOffset = Offset;
+		} else {
+			pHTInfo->bCurBW40MHz = false;
+			pHTInfo->CurSTAExtChnlOffset = HT_EXTCHNL_OFFSET_NO_EXT;
+		}
+	} else {
+		pHTInfo->bCurBW40MHz = false;
+		pHTInfo->CurSTAExtChnlOffset = HT_EXTCHNL_OFFSET_NO_EXT;
+	}
+
+	pHTInfo->bSwBwInProgress = true;
+
+	// TODO: 2007.7.13 by Emily Wait 2000ms  in order to garantee that switching
+	//   bandwidth is executed after scan is finished. It is a temporal solution
+	//   because software should ganrantee the last operation of switching bandwidth
+	//   is executed properlly.
+	HTSetConnectBwModeCallback(ieee);
+
+//	spin_unlock_irqrestore(&(ieee->bw_spinlock), flags);
+}
+
+void HTSetConnectBwModeCallback(struct ieee80211_device* ieee)
+{
+	PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
+
+	IEEE80211_DEBUG(IEEE80211_DL_HT, "======>%s()\n", __FUNCTION__);
+	if(pHTInfo->bCurBW40MHz)
+	{
+		if(pHTInfo->CurSTAExtChnlOffset==HT_EXTCHNL_OFFSET_UPPER)
+			ieee->set_chan(ieee->dev, ieee->current_network.channel+2);
+		else if(pHTInfo->CurSTAExtChnlOffset==HT_EXTCHNL_OFFSET_LOWER)
+			ieee->set_chan(ieee->dev, ieee->current_network.channel-2);
+		else
+			ieee->set_chan(ieee->dev, ieee->current_network.channel);
+
+		ieee->SetBWModeHandler(ieee->dev, HT_CHANNEL_WIDTH_20_40, pHTInfo->CurSTAExtChnlOffset);
+	} else {
+		ieee->set_chan(ieee->dev, ieee->current_network.channel);
+		ieee->SetBWModeHandler(ieee->dev, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT);
+	}
+
+	pHTInfo->bSwBwInProgress = false;
+}
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+EXPORT_SYMBOL_NOVERS(HTUpdateSelfAndPeerSetting);
+#else
+EXPORT_SYMBOL(HTUpdateSelfAndPeerSetting);
+#endif
diff --git a/drivers/staging/rtl8192su/ieee80211/rtl819x_Qos.h b/drivers/staging/rtl8192su/ieee80211/rtl819x_Qos.h
new file mode 100644
index 00000000000..f7b882b99d1
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/rtl819x_Qos.h
@@ -0,0 +1,749 @@
+#ifndef __INC_QOS_TYPE_H
+#define __INC_QOS_TYPE_H
+
+//#include "EndianFree.h"
+#define BIT0                    0x00000001
+#define BIT1                    0x00000002
+#define BIT2                    0x00000004
+#define BIT3                    0x00000008
+#define BIT4                    0x00000010
+#define BIT5                    0x00000020
+#define BIT6                    0x00000040
+#define BIT7                    0x00000080
+#define BIT8                    0x00000100
+#define BIT9                    0x00000200
+#define BIT10                   0x00000400
+#define BIT11                   0x00000800
+#define BIT12                   0x00001000
+#define BIT13                   0x00002000
+#define BIT14                   0x00004000
+#define BIT15                   0x00008000
+#define BIT16                   0x00010000
+#define BIT17                   0x00020000
+#define BIT18                   0x00040000
+#define BIT19                   0x00080000
+#define BIT20                   0x00100000
+#define BIT21                   0x00200000
+#define BIT22                   0x00400000
+#define BIT23                   0x00800000
+#define BIT24                   0x01000000
+#define BIT25                   0x02000000
+#define BIT26                   0x04000000
+#define BIT27                   0x08000000
+#define BIT28                   0x10000000
+#define BIT29                   0x20000000
+#define BIT30                   0x40000000
+#define BIT31                   0x80000000
+
+#define	MAX_WMMELE_LENGTH	64
+
+//
+// QoS mode.
+// enum 0, 1, 2, 4: since we can use the OR(|) operation.
+//
+// QOS_MODE is redefined for enum can't be ++, | under C++ compiler, 2006.05.17, by rcnjko.
+//typedef	enum _QOS_MODE{
+//	QOS_DISABLE		= 0,
+//	QOS_WMM			= 1,
+//	QOS_EDCA			= 2,
+//	QOS_HCCA			= 4,
+//}QOS_MODE,*PQOS_MODE;
+//
+typedef u32 QOS_MODE, *PQOS_MODE;
+#define QOS_DISABLE		0
+#define QOS_WMM			1
+#define QOS_WMMSA		2
+#define QOS_EDCA		4
+#define QOS_HCCA		8
+#define QOS_WMM_UAPSD		16   //WMM Power Save, 2006-06-14 Isaiah
+
+#define AC_PARAM_SIZE	4
+#define WMM_PARAM_ELE_BODY_LEN	18
+
+//
+// QoS ACK Policy Field Values
+// Ref: WMM spec 2.1.6: QoS Control Field, p.10.
+//
+typedef	enum _ACK_POLICY{
+	eAckPlc0_ACK		= 0x00,
+	eAckPlc1_NoACK		= 0x01,
+}ACK_POLICY,*PACK_POLICY;
+
+#define WMM_PARAM_ELEMENT_SIZE	(8+(4*AC_PARAM_SIZE))
+#if 0
+#define GET_QOS_CTRL(_pStart)	ReadEF2Byte((u8 *)(_pStart) + 24)
+#define SET_QOS_CTRL(_pStart, _value)	WriteEF2Byte((u8 *)(_pStart) + 24, _value)
+
+// WMM control field.
+#define GET_QOS_CTRL_WMM_UP(_pStart)	((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 0, 3))
+#define SET_QOS_CTRL_WMM_UP(_pStart, _value)	SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 0, 3, (u8)(_value))
+
+#define GET_QOS_CTRL_WMM_EOSP(_pStart)	((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 4, 1))
+#define SET_QOS_CTRL_WMM_EOSP(_pStart, _value)	SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 4, 1, (u8)(_value))
+
+#define GET_QOS_CTRL_WMM_ACK_POLICY(_pStart)	((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 5, 2))
+#define SET_QOS_CTRL_WMM_ACK_POLICY(_pStart, _value)	SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 5, 2, (u8)(_value))
+
+// 802.11e control field (by STA, data)
+#define GET_QOS_CTRL_STA_DATA_TID(_pStart)	((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 0, 4))
+#define SET_QOS_CTRL_STA_DATA_TID(_pStart, _value)	SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 0, 4, (u8)(_value))
+
+#define GET_QOS_CTRL_STA_DATA_QSIZE_FLAG(_pStart)	((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 4, 1))
+#define SET_QOS_CTRL_STA_DATA_QSIZE_FLAG(_pStart, _value)	SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 4, 1, (u8)(_value))
+
+#define GET_QOS_CTRL_STA_DATA_ACK_POLICY(_pStart)	((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 5, 2))
+#define SET_QOS_CTRL_STA_DATA_ACK_POLICY(_pStart, _value)	SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 5, 2, (u8)(_value))
+
+#define GET_QOS_CTRL_STA_DATA_TXOP(_pStart)	((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 8, 8))
+#define SET_QOS_CTRL_STA_DATA_TXOP(_pStart, _value)	SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 8, 8, (u8)(_value))
+
+#define GET_QOS_CTRL_STA_DATA_QSIZE(_pStart)	GET_QOS_CTRL_STA_DATA_TXOP(_pStart)
+#define SET_QOS_CTRL_STA_DATA_QSIZE(_pStart, _value)	SET_QOS_CTRL_STA_DATA_TXOP(_pStart)
+
+// 802.11e control field (by HC, data)
+#define GET_QOS_CTRL_HC_DATA_TID(_pStart)	((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 0, 4))
+#define SET_QOS_CTRL_HC_DATA_TID(_pStart, _value)	SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 0, 4, (u8)(_value))
+
+#define GET_QOS_CTRL_HC_DATA_EOSP(_pStart)	((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 4, 1))
+#define SET_QOS_CTRL_HC_DATA_EOSP(_pStart, _value)	SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 4, 1, (u8)(_value))
+
+#define GET_QOS_CTRL_HC_DATA_ACK_POLICY(_pStart)	((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 5, 2))
+#define SET_QOS_CTRL_HC_DATA_ACK_POLICY(_pStart, _value)	SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 5, 2, (u8)(_value))
+
+#define GET_QOS_CTRL_HC_DATA_PS_BUFSTATE(_pStart)	((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 8, 8))
+#define SET_QOS_CTRL_HC_DATA_PS_BUFSTATE(_pStart, _value)	SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 8, 8, (u8)(_value))
+
+// 802.11e control field (by HC, CFP)
+#define GET_QOS_CTRL_HC_CFP_TID(_pStart)	((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 0, 4))
+#define SET_QOS_CTRL_HC_CFP_TID(_pStart, _value)	SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 0, 4, (u8)(_value))
+
+#define GET_QOS_CTRL_HC_CFP_EOSP(_pStart)	((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 4, 1))
+#define SET_QOS_CTRL_HC_CFP_EOSP(_pStart, _value)	SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 4, 1, (u8)(_value))
+
+#define GET_QOS_CTRL_HC_CFP_ACK_POLICY(_pStart)	((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 5, 2))
+#define SET_QOS_CTRL_HC_CFP_ACK_POLICY(_pStart, _value)	SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 5, 2, (u8)(_value))
+
+#define GET_QOS_CTRL_HC_CFP_TXOP_LIMIT(_pStart)	((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 8, 8))
+#define SET_QOS_CTRL_HC_CFP_TXOP_LIMIT(_pStart, _value)	SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 8, 8, (u8)(_value))
+
+#define SET_WMM_QOS_INFO_FIELD(_pStart, _val)	WriteEF1Byte(_pStart, _val)
+
+#define GET_WMM_QOS_INFO_FIELD_PARAMETERSET_COUNT(_pStart)	LE_BITS_TO_1BYTE(_pStart, 0, 4)
+#define SET_WMM_QOS_INFO_FIELD_PARAMETERSET_COUNT(_pStart, _val)	SET_BITS_TO_LE_1BYTE(_pStart, 0, 4, _val)
+
+#define GET_WMM_QOS_INFO_FIELD_AP_UAPSD(_pStart)	LE_BITS_TO_1BYTE(_pStart, 7, 1)
+#define SET_WMM_QOS_INFO_FIELD_AP_UAPSD(_pStart, _val)	SET_BITS_TO_LE_1BYTE(_pStart, 7, 1, _val)
+
+#define GET_WMM_QOS_INFO_FIELD_STA_AC_VO_UAPSD(_pStart)	LE_BITS_TO_1BYTE(_pStart, 0, 1)
+#define SET_WMM_QOS_INFO_FIELD_STA_AC_VO_UAPSD(_pStart, _val)	SET_BITS_TO_LE_1BYTE(_pStart, 0, 1, _val)
+
+#define GET_WMM_QOS_INFO_FIELD_STA_AC_VI_UAPSD(_pStart)	LE_BITS_TO_1BYTE(_pStart, 1, 1)
+#define SET_WMM_QOS_INFO_FIELD_STA_AC_VI_UAPSD(_pStart, _val)	SET_BITS_TO_LE_1BYTE(_pStart, 1, 1, _val)
+
+#define GET_WMM_QOS_INFO_FIELD_STA_AC_BE_UAPSD(_pStart)	LE_BITS_TO_1BYTE(_pStart, 2, 1)
+#define SET_WMM_QOS_INFO_FIELD_STA_AC_BE_UAPSD(_pStart, _val)	SET_BITS_TO_LE_1BYTE(_pStart, 2, 1, _val)
+
+#define GET_WMM_QOS_INFO_FIELD_STA_AC_BK_UAPSD(_pStart)	LE_BITS_TO_1BYTE(_pStart, 3, 1)
+#define SET_WMM_QOS_INFO_FIELD_STA_AC_BK_UAPSD(_pStart, _val)	SET_BITS_TO_LE_1BYTE(_pStart, 3, 1, _val)
+
+#define GET_WMM_QOS_INFO_FIELD_STA_MAX_SP_LEN(_pStart)	LE_BITS_TO_1BYTE(_pStart, 5, 2)
+#define SET_WMM_QOS_INFO_FIELD_STA_MAX_SP_LEN(_pStart, _val)	SET_BITS_TO_LE_1BYTE(_pStart, 5, 2, _val)
+
+
+#define WMM_INFO_ELEMENT_SIZE	7
+
+#define GET_WMM_INFO_ELE_OUI(_pStart)	((u8 *)(_pStart))
+#define SET_WMM_INFO_ELE_OUI(_pStart, _pVal)	PlatformMoveMemory(_pStart, _pVal, 3);
+
+#define GET_WMM_INFO_ELE_OUI_TYPE(_pStart)	( EF1Byte( *((u8 *)(_pStart)+3) ) )
+#define SET_WMM_INFO_ELE_OUI_TYPE(_pStart, _val)	( *((u8 *)(_pStart)+3) = EF1Byte(_val) )
+
+#define GET_WMM_INFO_ELE_OUI_SUBTYPE(_pStart)	( EF1Byte( *((u8 *)(_pStart)+4) ) )
+#define SET_WMM_INFO_ELE_OUI_SUBTYPE(_pStart, _val)	( *((u8 *)(_pStart)+4) = EF1Byte(_val) )
+
+#define GET_WMM_INFO_ELE_VERSION(_pStart)	( EF1Byte( *((u8 *)(_pStart)+5) ) )
+#define SET_WMM_INFO_ELE_VERSION(_pStart, _val)	( *((u8 *)(_pStart)+5) = EF1Byte(_val) )
+
+#define GET_WMM_INFO_ELE_QOS_INFO_FIELD(_pStart)	( EF1Byte( *((u8 *)(_pStart)+6) ) )
+#define SET_WMM_INFO_ELE_QOS_INFO_FIELD(_pStart, _val)	( *((u8 *)(_pStart)+6) = EF1Byte(_val) )
+
+
+
+#define GET_WMM_AC_PARAM_AIFSN(_pStart)	( (u8)LE_BITS_TO_4BYTE(_pStart, 0, 4) )
+#define SET_WMM_AC_PARAM_AIFSN(_pStart, _val)	SET_BITS_TO_LE_4BYTE(_pStart, 0, 4, _val)
+
+#define GET_WMM_AC_PARAM_ACM(_pStart)	( (u8)LE_BITS_TO_4BYTE(_pStart, 4, 1) )
+#define SET_WMM_AC_PARAM_ACM(_pStart, _val)	SET_BITS_TO_LE_4BYTE(_pStart, 4, 1, _val)
+
+#define GET_WMM_AC_PARAM_ACI(_pStart)		( (u8)LE_BITS_TO_4BYTE(_pStart, 5, 2) )
+#define SET_WMM_AC_PARAM_ACI(_pStart, _val)	SET_BITS_TO_LE_4BYTE(_pStart, 5, 2, _val)
+
+#define GET_WMM_AC_PARAM_ACI_AIFSN(_pStart)	( (u8)LE_BITS_TO_4BYTE(_pStart, 0, 8) )
+#define SET_WMM_AC_PARAM_ACI_AIFSN(_pStart, _val)	SET_BTIS_TO_LE_4BYTE(_pStart, 0, 8, _val)
+
+#define GET_WMM_AC_PARAM_ECWMIN(_pStart)	( (u8)LE_BITS_TO_4BYTE(_pStart, 8, 4) )
+#define SET_WMM_AC_PARAM_ECWMIN(_pStart, _val)	SET_BITS_TO_LE_4BYTE(_pStart, 8, 4, _val)
+
+#define GET_WMM_AC_PARAM_ECWMAX(_pStart)	( (u8)LE_BITS_TO_4BYTE(_pStart, 12, 4) )
+#define SET_WMM_AC_PARAM_ECWMAX(_pStart, _val)	SET_BITS_TO_LE_4BYTE(_pStart, 12, 4, _val)
+
+#define GET_WMM_AC_PARAM_TXOP_LIMIT(_pStart)		( (u16)LE_BITS_TO_4BYTE(_pStart, 16, 16) )
+#define SET_WMM_AC_PARAM_TXOP_LIMIT(_pStart, _val)	SET_BITS_TO_LE_4BYTE(_pStart, 16, 16, _val)
+
+
+
+
+#define GET_WMM_PARAM_ELE_OUI(_pStart)	((u8 *)(_pStart))
+#define SET_WMM_PARAM_ELE_OUI(_pStart, _pVal)	PlatformMoveMemory(_pStart, _pVal, 3)
+
+#define GET_WMM_PARAM_ELE_OUI_TYPE(_pStart)	( EF1Byte( *((u8 *)(_pStart)+3) ) )
+#define SET_WMM_PARAM_ELE_OUI_TYPE(_pStart, _val)	( *((u8 *)(_pStart)+3) = EF1Byte(_val) )
+
+#define GET_WMM_PARAM_ELE_OUI_SUBTYPE(_pStart)	( EF1Byte( *((u8 *)(_pStart)+4) ) )
+#define SET_WMM_PARAM_ELE_OUI_SUBTYPE(_pStart, _val)	( *((u8 *)(_pStart)+4) = EF1Byte(_val) )
+
+#define GET_WMM_PARAM_ELE_VERSION(_pStart)	( EF1Byte( *((u8 *)(_pStart)+5) ) )
+#define SET_WMM_PARAM_ELE_VERSION(_pStart, _val)	( *((u8 *)(_pStart)+5) = EF1Byte(_val) )
+
+#define GET_WMM_PARAM_ELE_QOS_INFO_FIELD(_pStart)	( EF1Byte( *((u8 *)(_pStart)+6) ) )
+#define SET_WMM_PARAM_ELE_QOS_INFO_FIELD(_pStart, _val)	( *((u8 *)(_pStart)+6) = EF1Byte(_val) )
+
+#define GET_WMM_PARAM_ELE_AC_PARAM(_pStart)	( (u8 *)(_pStart)+8 )
+#define SET_WMM_PARAM_ELE_AC_PARAM(_pStart, _pVal) PlatformMoveMemory((_pStart)+8, _pVal, 16)
+#endif
+
+//
+// QoS Control Field
+// Ref:
+//	1. WMM spec 2.1.6: QoS Control Field, p.9.
+//	2. 802.11e/D13.0 7.1.3.5, p.26.
+//
+typedef	union _QOS_CTRL_FIELD{
+	u8	charData[2];
+	u16	shortData;
+
+	// WMM spec
+	struct
+	{
+		u8		UP:3;
+		u8		usRsvd1:1;
+		u8		EOSP:1;
+		u8		AckPolicy:2;
+		u8		usRsvd2:1;
+		u8		ucRsvdByte;
+	}WMM;
+
+	// 802.11e: QoS data type frame sent by non-AP QSTAs.
+	struct
+	{
+		u8		TID:4;
+		u8		bIsQsize:1;// 0: BIT[8:15] is TXOP Duration Requested, 1: BIT[8:15] is Queue Size.
+		u8		AckPolicy:2;
+		u8		usRsvd:1;
+		u8		TxopOrQsize;	// (BIT4=0)TXOP Duration Requested or (BIT4=1)Queue Size.
+	}BySta;
+
+	// 802.11e: QoS data, QoS Null, and QoS Data+CF-Ack frames sent by HC.
+	struct
+	{
+		u8		TID:4;
+		u8		EOSP:1;
+		u8		AckPolicy:2;
+		u8		usRsvd:1;
+		u8		PSBufState;		// QAP PS Buffer State.
+	}ByHc_Data;
+
+	// 802.11e: QoS (+) CF-Poll frames sent by HC.
+	struct
+	{
+		u8		TID:4;
+		u8		EOSP:1;
+		u8		AckPolicy:2;
+		u8		usRsvd:1;
+		u8		TxopLimit;		// TXOP Limit.
+	}ByHc_CFP;
+
+}QOS_CTRL_FIELD, *PQOS_CTRL_FIELD;
+
+
+//
+// QoS Info Field
+// Ref:
+//	1. WMM spec 2.2.1: WME Information Element, p.11.
+//	2. 8185 QoS code: QOS_INFO [def. in QoS_mp.h]
+//
+typedef	union _QOS_INFO_FIELD{
+	u8	charData;
+
+	struct
+	{
+		u8		ucParameterSetCount:4;
+		u8		ucReserved:4;
+	}WMM;
+
+	struct
+	{
+		//Ref WMM_Specification_1-1.pdf, 2006-06-13 Isaiah
+		u8		ucAC_VO_UAPSD:1;
+		u8		ucAC_VI_UAPSD:1;
+		u8		ucAC_BE_UAPSD:1;
+		u8		ucAC_BK_UAPSD:1;
+		u8		ucReserved1:1;
+		u8		ucMaxSPLen:2;
+		u8		ucReserved2:1;
+
+	}ByWmmPsSta;
+
+	struct
+	{
+		//Ref WMM_Specification_1-1.pdf, 2006-06-13 Isaiah
+		u8		ucParameterSetCount:4;
+		u8		ucReserved:3;
+		u8		ucApUapsd:1;
+	}ByWmmPsAp;
+
+	struct
+	{
+		u8		ucAC3_UAPSD:1;
+		u8		ucAC2_UAPSD:1;
+		u8		ucAC1_UAPSD:1;
+		u8		ucAC0_UAPSD:1;
+		u8		ucQAck:1;
+		u8		ucMaxSPLen:2;
+		u8		ucMoreDataAck:1;
+	} By11eSta;
+
+	struct
+	{
+		u8		ucParameterSetCount:4;
+		u8		ucQAck:1;
+		u8		ucQueueReq:1;
+		u8		ucTXOPReq:1;
+		u8		ucReserved:1;
+	} By11eAp;
+
+	struct
+	{
+		u8		ucReserved1:4;
+		u8		ucQAck:1;
+		u8		ucReserved2:2;
+		u8		ucMoreDataAck:1;
+	} ByWmmsaSta;
+
+	struct
+	{
+		u8		ucReserved1:4;
+		u8		ucQAck:1;
+		u8		ucQueueReq:1;
+		u8		ucTXOPReq:1;
+		u8		ucReserved2:1;
+	} ByWmmsaAp;
+
+	struct
+	{
+		u8		ucAC3_UAPSD:1;
+		u8		ucAC2_UAPSD:1;
+		u8		ucAC1_UAPSD:1;
+		u8		ucAC0_UAPSD:1;
+		u8		ucQAck:1;
+		u8		ucMaxSPLen:2;
+		u8		ucMoreDataAck:1;
+	} ByAllSta;
+
+	struct
+	{
+		u8		ucParameterSetCount:4;
+		u8		ucQAck:1;
+		u8		ucQueueReq:1;
+		u8		ucTXOPReq:1;
+		u8		ucApUapsd:1;
+	} ByAllAp;
+
+}QOS_INFO_FIELD, *PQOS_INFO_FIELD;
+
+#if 0
+//
+// WMM Information Element
+// Ref: WMM spec 2.2.1: WME Information Element, p.10.
+//
+typedef struct _WMM_INFO_ELEMENT{
+//	u8			ElementID;
+//	u8			Length;
+	u8			OUI[3];
+	u8			OUI_Type;
+	u8			OUI_SubType;
+	u8			Version;
+	QOS_INFO_FIELD	QosInfo;
+}WMM_INFO_ELEMENT, *PWMM_INFO_ELEMENT;
+#endif
+
+//
+// ACI to AC coding.
+// Ref: WMM spec 2.2.2: WME Parameter Element, p.13.
+//
+// AC_CODING is redefined for enum can't be ++, | under C++ compiler, 2006.05.17, by rcnjko.
+//typedef	enum _AC_CODING{
+//	AC0_BE	= 0,		// ACI: 0x00	// Best Effort
+//	AC1_BK	= 1,		// ACI: 0x01	// Background
+//	AC2_VI	= 2,		// ACI: 0x10	// Video
+//	AC3_VO	= 3,		// ACI: 0x11	// Voice
+//	AC_MAX = 4,		// Max: define total number; Should not to be used as a real enum.
+//}AC_CODING,*PAC_CODING;
+//
+typedef u32 AC_CODING;
+#define AC0_BE	0		// ACI: 0x00	// Best Effort
+#define AC1_BK	1		// ACI: 0x01	// Background
+#define AC2_VI	2		// ACI: 0x10	// Video
+#define AC3_VO	3		// ACI: 0x11	// Voice
+#define AC_MAX	4		// Max: define total number; Should not to be used as a real enum.
+
+//
+// ACI/AIFSN Field.
+// Ref: WMM spec 2.2.2: WME Parameter Element, p.12.
+//
+typedef	union _ACI_AIFSN{
+	u8	charData;
+
+	struct
+	{
+		u8	AIFSN:4;
+		u8	ACM:1;
+		u8	ACI:2;
+		u8	Reserved:1;
+	}f;	// Field
+}ACI_AIFSN, *PACI_AIFSN;
+
+//
+// ECWmin/ECWmax field.
+// Ref: WMM spec 2.2.2: WME Parameter Element, p.13.
+//
+typedef	union _ECW{
+	u8	charData;
+	struct
+	{
+		u8	ECWmin:4;
+		u8	ECWmax:4;
+	}f;	// Field
+}ECW, *PECW;
+
+//
+// AC Parameters Record Format.
+// Ref: WMM spec 2.2.2: WME Parameter Element, p.12.
+//
+typedef	union _AC_PARAM{
+	u32	longData;
+	u8	charData[4];
+
+	struct
+	{
+		ACI_AIFSN	AciAifsn;
+		ECW		Ecw;
+		u16		TXOPLimit;
+	}f;	// Field
+}AC_PARAM, *PAC_PARAM;
+
+
+
+//
+// QoS element subtype
+//
+typedef	enum _QOS_ELE_SUBTYPE{
+	QOSELE_TYPE_INFO	= 0x00,		// 0x00: Information element
+	QOSELE_TYPE_PARAM	= 0x01,		// 0x01: parameter element
+}QOS_ELE_SUBTYPE,*PQOS_ELE_SUBTYPE;
+
+
+//
+// Direction Field Values.
+// Ref: WMM spec 2.2.11: WME TSPEC Element, p.18.
+//
+typedef	enum _DIRECTION_VALUE{
+	DIR_UP			= 0,		// 0x00	// UpLink
+	DIR_DOWN		= 1,		// 0x01	// DownLink
+	DIR_DIRECT		= 2,		// 0x10	// DirectLink
+	DIR_BI_DIR		= 3,		// 0x11	// Bi-Direction
+}DIRECTION_VALUE,*PDIRECTION_VALUE;
+
+
+//
+// TS Info field in WMM TSPEC Element.
+// Ref:
+//	1. WMM spec 2.2.11: WME TSPEC Element, p.18.
+//	2. 8185 QoS code: QOS_TSINFO [def. in QoS_mp.h]
+//
+typedef union _QOS_TSINFO{
+	u8		charData[3];
+	struct {
+		u8		ucTrafficType:1;			//WMM is reserved
+		u8		ucTSID:4;
+		u8		ucDirection:2;
+		u8		ucAccessPolicy:2;	//WMM: bit8=0, bit7=1
+		u8		ucAggregation:1;		//WMM is reserved
+		u8		ucPSB:1;				//WMMSA is APSD
+		u8		ucUP:3;
+		u8		ucTSInfoAckPolicy:2;		//WMM is reserved
+		u8		ucSchedule:1;			//WMM is reserved
+		u8		ucReserved:7;
+	}field;
+}QOS_TSINFO, *PQOS_TSINFO;
+
+//
+// WMM TSPEC Body.
+// Ref: WMM spec 2.2.11: WME TSPEC Element, p.16.
+//
+typedef union _TSPEC_BODY{
+	u8		charData[55];
+
+	struct
+	{
+		QOS_TSINFO	TSInfo;	//u8	TSInfo[3];
+		u16	NominalMSDUsize;
+		u16	MaxMSDUsize;
+		u32	MinServiceItv;
+		u32	MaxServiceItv;
+		u32	InactivityItv;
+		u32	SuspenItv;
+		u32	ServiceStartTime;
+		u32	MinDataRate;
+		u32	MeanDataRate;
+		u32	PeakDataRate;
+		u32	MaxBurstSize;
+		u32	DelayBound;
+		u32	MinPhyRate;
+		u16	SurplusBandwidthAllowance;
+		u16	MediumTime;
+	} f;	// Field
+}TSPEC_BODY, *PTSPEC_BODY;
+
+
+//
+// WMM TSPEC Element.
+// Ref: WMM spec 2.2.11: WME TSPEC Element, p.16.
+//
+typedef struct _WMM_TSPEC{
+	u8		ID;
+	u8		Length;
+	u8		OUI[3];
+	u8		OUI_Type;
+	u8		OUI_SubType;
+	u8		Version;
+	TSPEC_BODY	Body;
+} WMM_TSPEC, *PWMM_TSPEC;
+
+//
+// ACM implementation method.
+// Annie, 2005-12-13.
+//
+typedef	enum _ACM_METHOD{
+	eAcmWay0_SwAndHw		= 0,		// By SW and HW.
+	eAcmWay1_HW			= 1,		// By HW.
+	eAcmWay2_SW			= 2,		// By SW.
+}ACM_METHOD,*PACM_METHOD;
+
+
+typedef struct _ACM{
+//	u8		RegEnableACM;
+	u64		UsedTime;
+	u64		MediumTime;
+	u8		HwAcmCtl;	// TRUE: UsedTime exceed => Do NOT USE this AC. It wll be written to ACM_CONTROL(0xBF BIT 0/1/2 in 8185B).
+}ACM, *PACM;
+
+typedef	u8		AC_UAPSD, *PAC_UAPSD;
+
+#define	GET_VO_UAPSD(_apsd) ((_apsd) & BIT0)
+#define	SET_VO_UAPSD(_apsd) ((_apsd) |= BIT0)
+
+#define	GET_VI_UAPSD(_apsd) ((_apsd) & BIT1)
+#define	SET_VI_UAPSD(_apsd) ((_apsd) |= BIT1)
+
+#define	GET_BK_UAPSD(_apsd) ((_apsd) & BIT2)
+#define	SET_BK_UAPSD(_apsd) ((_apsd) |= BIT2)
+
+#define	GET_BE_UAPSD(_apsd) ((_apsd) & BIT3)
+#define	SET_BE_UAPSD(_apsd) ((_apsd) |= BIT3)
+
+
+//typedef struct _TCLASS{
+// TODO
+//} TCLASS, *PTCLASS;
+typedef union _QOS_TCLAS{
+
+	struct _TYPE_GENERAL{
+		u8		Priority;
+		u8 		ClassifierType;
+		u8 		Mask;
+	} TYPE_GENERAL;
+
+	struct _TYPE0_ETH{
+		u8		Priority;
+		u8 		ClassifierType;
+		u8 		Mask;
+		u8		SrcAddr[6];
+		u8		DstAddr[6];
+		u16		Type;
+	} TYPE0_ETH;
+
+	struct _TYPE1_IPV4{
+		u8		Priority;
+		u8 		ClassifierType;
+		u8 		Mask;
+		u8 		Version;
+		u8		SrcIP[4];
+		u8		DstIP[4];
+		u16		SrcPort;
+		u16		DstPort;
+		u8		DSCP;
+		u8		Protocol;
+		u8		Reserved;
+	} TYPE1_IPV4;
+
+	struct _TYPE1_IPV6{
+		u8		Priority;
+		u8 		ClassifierType;
+		u8 		Mask;
+		u8 		Version;
+		u8		SrcIP[16];
+		u8		DstIP[16];
+		u16		SrcPort;
+		u16		DstPort;
+		u8		FlowLabel[3];
+	} TYPE1_IPV6;
+
+	struct _TYPE2_8021Q{
+		u8		Priority;
+		u8 		ClassifierType;
+		u8 		Mask;
+		u16		TagType;
+	} TYPE2_8021Q;
+} QOS_TCLAS, *PQOS_TCLAS;
+
+//typedef struct _WMM_TSTREAM{
+//
+//- TSPEC
+//- AC (which to mapping)
+//} WMM_TSTREAM, *PWMM_TSTREAM;
+typedef struct _QOS_TSTREAM{
+	u8			AC;
+	WMM_TSPEC		TSpec;
+	QOS_TCLAS		TClass;
+} QOS_TSTREAM, *PQOS_TSTREAM;
+
+//typedef struct _U_APSD{
+//- TriggerEnable [4]
+//- MaxSPLength
+//- HighestAcBuffered
+//} U_APSD, *PU_APSD;
+
+//joseph TODO:
+//	UAPSD function should be implemented by 2 data structure
+//	"Qos control field" and "Qos info field"
+//typedef struct _QOS_UAPSD{
+//	u8			bTriggerEnable[4];
+//	u8 			MaxSPLength;
+//	u8			HighestBufAC;
+//} QOS_UAPSD, *PQOS_APSD;
+
+//----------------------------------------------------------------------------
+//      802.11 Management frame Status Code field
+//----------------------------------------------------------------------------
+typedef struct _OCTET_STRING{
+        u8        	*Octet;
+        u16             Length;
+}OCTET_STRING, *POCTET_STRING;
+#if 0
+#define FillOctetString(_os,_octet,_len)             \
+        (_os).Octet=(u8 *)(_octet);                  \
+        (_os).Length=(_len);
+
+#define WMM_ELEM_HDR_LEN        		     6
+#define WMMElemSkipHdr(_osWMMElem)                   \
+        (_osWMMElem).Octet += WMM_ELEM_HDR_LEN;      \
+        (_osWMMElem).Length -= WMM_ELEM_HDR_LEN;
+#endif
+//
+// STA QoS data.
+// Ref: DOT11_QOS in 8185 code. [def. in QoS_mp.h]
+//
+typedef struct _STA_QOS{
+	//DECLARE_RT_OBJECT(STA_QOS);
+	u8				WMMIEBuf[MAX_WMMELE_LENGTH];
+	u8*				WMMIE;
+
+	// Part 1. Self QoS Mode.
+	QOS_MODE			QosCapability; //QoS Capability, 2006-06-14 Isaiah
+	QOS_MODE			CurrentQosMode;
+
+	// For WMM Power Save Mode :
+	// ACs are trigger/delivery enabled or legacy power save enabled. 2006-06-13 Isaiah
+	AC_UAPSD			b4ac_Uapsd;  //VoUapsd(bit0), ViUapsd(bit1),  BkUapsd(bit2), BeUapsd(bit3),
+	AC_UAPSD			Curr4acUapsd;
+	u8				bInServicePeriod;
+	u8				MaxSPLength;
+	int 				NumBcnBeforeTrigger;
+
+	// Part 2. EDCA Parameter (perAC)
+	u8 *				pWMMInfoEle;
+	u8				WMMParamEle[WMM_PARAM_ELEMENT_SIZE];
+	u8				WMMPELength;
+
+	// <Bruce_Note>
+	//2 ToDo: remove the Qos Info Field and replace it by the above WMM Info element.
+	// By Bruce, 2008-01-30.
+	// Part 2. EDCA Parameter (perAC)
+	QOS_INFO_FIELD			QosInfoField_STA; 	// Maintained by STA
+	QOS_INFO_FIELD			QosInfoField_AP;	// Retrieved from AP
+
+	AC_PARAM			CurAcParameters[4];
+
+	// Part 3. ACM
+	ACM				acm[4];
+	ACM_METHOD			AcmMethod;
+
+	// Part 4. Per TID (Part 5: TCLASS will be described by TStream)
+	QOS_TSTREAM			TStream[16];
+	WMM_TSPEC			TSpec;
+
+	u32				QBssWirelessMode;
+
+	// No Ack Setting
+	u8				bNoAck;
+
+	// Enable/Disable Rx immediate BA capability.
+	u8				bEnableRxImmBA;
+
+}STA_QOS, *PSTA_QOS;
+
+//
+// BSS QOS data.
+// Ref: BssDscr in 8185 code. [def. in BssDscr.h]
+//
+typedef struct _BSS_QOS{
+	QOS_MODE		bdQoSMode;
+
+	u8			bdWMMIEBuf[MAX_WMMELE_LENGTH];
+	u8*		bdWMMIE;
+
+	QOS_ELE_SUBTYPE		EleSubType;
+
+	u8 *			pWMMInfoEle;
+	u8 *			pWMMParamEle;
+
+	QOS_INFO_FIELD		QosInfoField;
+	AC_PARAM		AcParameter[4];
+}BSS_QOS, *PBSS_QOS;
+
+
+//
+// Ref: sQoSCtlLng and QoSCtl definition in 8185 QoS code.
+//#define QoSCtl   ((	(Adapter->bRegQoS) && (Adapter->dot11QoS.QoSMode &(QOS_EDCA|QOS_HCCA))	  )  ?sQoSCtlLng:0)
+//
+#define sQoSCtlLng			2
+#define	QOS_CTRL_LEN(_QosMode)		((_QosMode > QOS_DISABLE)? sQoSCtlLng : 0)
+
+
+//Added by joseph
+//UP Mapping to AC, using in MgntQuery_SequenceNumber() and maybe for DSCP
+//#define UP2AC(up)			((up<3)?((up==0)?1:0):(up>>1))
+#define IsACValid(ac)			((ac<=7 )?true:false )
+
+#endif // #ifndef __INC_QOS_TYPE_H
diff --git a/drivers/staging/rtl8192su/ieee80211/rtl819x_TS.h b/drivers/staging/rtl8192su/ieee80211/rtl819x_TS.h
new file mode 100644
index 00000000000..baaac2149de
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/rtl819x_TS.h
@@ -0,0 +1,56 @@
+#ifndef _TSTYPE_H_
+#define _TSTYPE_H_
+#include "rtl819x_Qos.h"
+#define TS_SETUP_TIMEOUT	60  // In millisecond
+#define TS_INACT_TIMEOUT	60
+#define TS_ADDBA_DELAY		60
+
+#define TOTAL_TS_NUM		16
+#define TCLAS_NUM		4
+
+// This define the Tx/Rx directions
+typedef enum _TR_SELECT {
+	TX_DIR = 0,
+	RX_DIR = 1,
+} TR_SELECT, *PTR_SELECT;
+
+typedef struct _TS_COMMON_INFO{
+	struct list_head		List;
+	struct timer_list		SetupTimer;
+	struct timer_list		InactTimer;
+	u8				Addr[6];
+	TSPEC_BODY			TSpec;
+	QOS_TCLAS			TClass[TCLAS_NUM];
+	u8				TClasProc;
+	u8				TClasNum;
+} TS_COMMON_INFO, *PTS_COMMON_INFO;
+
+typedef struct _TX_TS_RECORD{
+	TS_COMMON_INFO		TsCommonInfo;
+	u16				TxCurSeq;
+	BA_RECORD			TxPendingBARecord;  	// For BA Originator
+	BA_RECORD			TxAdmittedBARecord;	// For BA Originator
+//	QOS_DL_RECORD		DLRecord;
+	u8				bAddBaReqInProgress;
+	u8				bAddBaReqDelayed;
+	u8				bUsingBa;
+	struct timer_list		TsAddBaTimer;
+	u8				num;
+} TX_TS_RECORD, *PTX_TS_RECORD;
+
+typedef struct _RX_TS_RECORD {
+	TS_COMMON_INFO		TsCommonInfo;
+	u16				RxIndicateSeq;
+	u16				RxTimeoutIndicateSeq;
+	struct list_head		RxPendingPktList;
+	struct timer_list		RxPktPendingTimer;
+	BA_RECORD			RxAdmittedBARecord;	 // For BA Recepient
+	u16				RxLastSeqNum;
+	u8				RxLastFragNum;
+	u8				num;
+//	QOS_DL_RECORD		DLRecord;
+} RX_TS_RECORD, *PRX_TS_RECORD;
+
+
+#endif
+
diff --git a/drivers/staging/rtl8192su/ieee80211/rtl819x_TSProc.c b/drivers/staging/rtl8192su/ieee80211/rtl819x_TSProc.c
new file mode 100644
index 00000000000..6fb7033ed36
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/rtl819x_TSProc.c
@@ -0,0 +1,667 @@
+#include "ieee80211.h"
+#include <linux/etherdevice.h>
+#include "rtl819x_TS.h"
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+#define list_for_each_entry_safe(pos, n, head, member) \
+	for (pos = list_entry((head)->next, typeof(*pos), member), \
+		n = list_entry(pos->member.next, typeof(*pos), member); \
+		&pos->member != (head); \
+		pos = n, n = list_entry(n->member.next, typeof(*n), member))
+#endif
+void TsSetupTimeOut(unsigned long data)
+{
+	// Not implement yet
+	// This is used for WMMSA and ACM , that would send ADDTSReq frame.
+}
+
+void TsInactTimeout(unsigned long data)
+{
+	// Not implement yet
+	// This is used for WMMSA and ACM.
+	// This function would be call when TS is no Tx/Rx for some period of time.
+}
+
+/********************************************************************************************************************
+ *function:  I still not understand this function, so wait for further implementation
+ *   input:  unsigned long	 data		//acturally we send TX_TS_RECORD or RX_TS_RECORD to these timer
+ *  return:  NULL
+ *  notice:
+********************************************************************************************************************/
+#if 1
+void RxPktPendingTimeout(unsigned long data)
+{
+	PRX_TS_RECORD	pRxTs = (PRX_TS_RECORD)data;
+	struct ieee80211_device *ieee = container_of(pRxTs, struct ieee80211_device, RxTsRecord[pRxTs->num]);
+
+	PRX_REORDER_ENTRY 	pReorderEntry = NULL;
+
+	//u32 flags = 0;
+	unsigned long flags = 0;
+	struct ieee80211_rxb *stats_IndicateArray[REORDER_WIN_SIZE];
+	u8 index = 0;
+	bool bPktInBuf = false;
+
+
+	spin_lock_irqsave(&(ieee->reorder_spinlock), flags);
+	//PlatformAcquireSpinLock(Adapter, RT_RX_SPINLOCK);
+	IEEE80211_DEBUG(IEEE80211_DL_REORDER,"==================>%s()\n",__FUNCTION__);
+	if(pRxTs->RxTimeoutIndicateSeq != 0xffff)
+	{
+		// Indicate the pending packets sequentially according to SeqNum until meet the gap.
+		while(!list_empty(&pRxTs->RxPendingPktList))
+		{
+			pReorderEntry = (PRX_REORDER_ENTRY)list_entry(pRxTs->RxPendingPktList.prev,RX_REORDER_ENTRY,List);
+			if(index == 0)
+				pRxTs->RxIndicateSeq = pReorderEntry->SeqNum;
+
+			if( SN_LESS(pReorderEntry->SeqNum, pRxTs->RxIndicateSeq) ||
+				SN_EQUAL(pReorderEntry->SeqNum, pRxTs->RxIndicateSeq)	)
+			{
+				list_del_init(&pReorderEntry->List);
+
+				if(SN_EQUAL(pReorderEntry->SeqNum, pRxTs->RxIndicateSeq))
+					pRxTs->RxIndicateSeq = (pRxTs->RxIndicateSeq + 1) % 4096;
+
+				IEEE80211_DEBUG(IEEE80211_DL_REORDER,"RxPktPendingTimeout(): IndicateSeq: %d\n", pReorderEntry->SeqNum);
+				stats_IndicateArray[index] = pReorderEntry->prxb;
+				index++;
+
+				list_add_tail(&pReorderEntry->List, &ieee->RxReorder_Unused_List);
+			}
+			else
+			{
+				bPktInBuf = true;
+				break;
+			}
+		}
+	}
+
+	if(index>0)
+	{
+		// Set RxTimeoutIndicateSeq to 0xffff to indicate no pending packets in buffer now.
+		pRxTs->RxTimeoutIndicateSeq = 0xffff;
+
+		// Indicate packets
+		if(index > REORDER_WIN_SIZE){
+			IEEE80211_DEBUG(IEEE80211_DL_ERR, "RxReorderIndicatePacket(): Rx Reorer buffer full!! \n");
+			spin_unlock_irqrestore(&(ieee->reorder_spinlock), flags);
+			return;
+		}
+		ieee80211_indicate_packets(ieee, stats_IndicateArray, index);
+		 bPktInBuf = false;
+
+	}
+
+	if(bPktInBuf && (pRxTs->RxTimeoutIndicateSeq==0xffff))
+	{
+		pRxTs->RxTimeoutIndicateSeq = pRxTs->RxIndicateSeq;
+#if 0
+		if(timer_pending(&pTS->RxPktPendingTimer))
+			del_timer_sync(&pTS->RxPktPendingTimer);
+		pTS->RxPktPendingTimer.expires = jiffies + MSECS(pHTInfo->RxReorderPendingTime);
+		add_timer(&pTS->RxPktPendingTimer);
+#else
+		mod_timer(&pRxTs->RxPktPendingTimer,  jiffies + MSECS(ieee->pHTInfo->RxReorderPendingTime));
+#endif
+
+#if 0
+		if(timer_pending(&pRxTs->RxPktPendingTimer))
+			del_timer_sync(&pRxTs->RxPktPendingTimer);
+		pRxTs->RxPktPendingTimer.expires = jiffies + ieee->pHTInfo->RxReorderPendingTime;
+		add_timer(&pRxTs->RxPktPendingTimer);
+#endif
+	}
+	spin_unlock_irqrestore(&(ieee->reorder_spinlock), flags);
+	//PlatformReleaseSpinLock(Adapter, RT_RX_SPINLOCK);
+}
+#endif
+
+/********************************************************************************************************************
+ *function:  Add BA timer function
+ *   input:  unsigned long	 data		//acturally we send TX_TS_RECORD or RX_TS_RECORD to these timer
+ *  return:  NULL
+ *  notice:
+********************************************************************************************************************/
+void TsAddBaProcess(unsigned long data)
+{
+	PTX_TS_RECORD	pTxTs = (PTX_TS_RECORD)data;
+	u8 num = pTxTs->num;
+	struct ieee80211_device *ieee = container_of(pTxTs, struct ieee80211_device, TxTsRecord[num]);
+
+	TsInitAddBA(ieee, pTxTs, BA_POLICY_IMMEDIATE, false);
+	IEEE80211_DEBUG(IEEE80211_DL_BA, "TsAddBaProcess(): ADDBA Req is started!! \n");
+}
+
+
+void ResetTsCommonInfo(PTS_COMMON_INFO	pTsCommonInfo)
+{
+	memset(pTsCommonInfo->Addr, 0, 6);
+	memset(&pTsCommonInfo->TSpec, 0, sizeof(TSPEC_BODY));
+	memset(&pTsCommonInfo->TClass, 0, sizeof(QOS_TCLAS)*TCLAS_NUM);
+	pTsCommonInfo->TClasProc = 0;
+	pTsCommonInfo->TClasNum = 0;
+}
+
+void ResetTxTsEntry(PTX_TS_RECORD pTS)
+{
+	ResetTsCommonInfo(&pTS->TsCommonInfo);
+	pTS->TxCurSeq = 0;
+	pTS->bAddBaReqInProgress = false;
+	pTS->bAddBaReqDelayed = false;
+	pTS->bUsingBa = false;
+	ResetBaEntry(&pTS->TxAdmittedBARecord); //For BA Originator
+	ResetBaEntry(&pTS->TxPendingBARecord);
+}
+
+void ResetRxTsEntry(PRX_TS_RECORD pTS)
+{
+	ResetTsCommonInfo(&pTS->TsCommonInfo);
+	pTS->RxIndicateSeq = 0xffff; // This indicate the RxIndicateSeq is not used now!!
+	pTS->RxTimeoutIndicateSeq = 0xffff; // This indicate the RxTimeoutIndicateSeq is not used now!!
+	ResetBaEntry(&pTS->RxAdmittedBARecord);	  // For BA Recepient
+}
+
+void TSInitialize(struct ieee80211_device *ieee)
+{
+	PTX_TS_RECORD		pTxTS  = ieee->TxTsRecord;
+	PRX_TS_RECORD		pRxTS  = ieee->RxTsRecord;
+	PRX_REORDER_ENTRY	pRxReorderEntry = ieee->RxReorderEntry;
+	u8				count = 0;
+	IEEE80211_DEBUG(IEEE80211_DL_TS, "==========>%s()\n", __FUNCTION__);
+	// Initialize Tx TS related info.
+	INIT_LIST_HEAD(&ieee->Tx_TS_Admit_List);
+	INIT_LIST_HEAD(&ieee->Tx_TS_Pending_List);
+	INIT_LIST_HEAD(&ieee->Tx_TS_Unused_List);
+
+	for(count = 0; count < TOTAL_TS_NUM; count++)
+	{
+		//
+		pTxTS->num = count;
+		// The timers for the operation of Traffic Stream and Block Ack.
+		// DLS related timer will be add here in the future!!
+		init_timer(&pTxTS->TsCommonInfo.SetupTimer);
+		pTxTS->TsCommonInfo.SetupTimer.data = (unsigned long)pTxTS;
+		pTxTS->TsCommonInfo.SetupTimer.function = TsSetupTimeOut;
+
+		init_timer(&pTxTS->TsCommonInfo.InactTimer);
+		pTxTS->TsCommonInfo.InactTimer.data = (unsigned long)pTxTS;
+		pTxTS->TsCommonInfo.InactTimer.function = TsInactTimeout;
+
+		init_timer(&pTxTS->TsAddBaTimer);
+		pTxTS->TsAddBaTimer.data = (unsigned long)pTxTS;
+		pTxTS->TsAddBaTimer.function = TsAddBaProcess;
+
+		init_timer(&pTxTS->TxPendingBARecord.Timer);
+		pTxTS->TxPendingBARecord.Timer.data = (unsigned long)pTxTS;
+		pTxTS->TxPendingBARecord.Timer.function = BaSetupTimeOut;
+
+		init_timer(&pTxTS->TxAdmittedBARecord.Timer);
+		pTxTS->TxAdmittedBARecord.Timer.data = (unsigned long)pTxTS;
+		pTxTS->TxAdmittedBARecord.Timer.function = TxBaInactTimeout;
+
+		ResetTxTsEntry(pTxTS);
+		list_add_tail(&pTxTS->TsCommonInfo.List, &ieee->Tx_TS_Unused_List);
+		pTxTS++;
+	}
+
+	// Initialize Rx TS related info.
+	INIT_LIST_HEAD(&ieee->Rx_TS_Admit_List);
+	INIT_LIST_HEAD(&ieee->Rx_TS_Pending_List);
+	INIT_LIST_HEAD(&ieee->Rx_TS_Unused_List);
+	for(count = 0; count < TOTAL_TS_NUM; count++)
+	{
+		pRxTS->num = count;
+		INIT_LIST_HEAD(&pRxTS->RxPendingPktList);
+
+		init_timer(&pRxTS->TsCommonInfo.SetupTimer);
+		pRxTS->TsCommonInfo.SetupTimer.data = (unsigned long)pRxTS;
+		pRxTS->TsCommonInfo.SetupTimer.function = TsSetupTimeOut;
+
+		init_timer(&pRxTS->TsCommonInfo.InactTimer);
+		pRxTS->TsCommonInfo.InactTimer.data = (unsigned long)pRxTS;
+		pRxTS->TsCommonInfo.InactTimer.function = TsInactTimeout;
+
+		init_timer(&pRxTS->RxAdmittedBARecord.Timer);
+		pRxTS->RxAdmittedBARecord.Timer.data = (unsigned long)pRxTS;
+		pRxTS->RxAdmittedBARecord.Timer.function = RxBaInactTimeout;
+
+		init_timer(&pRxTS->RxPktPendingTimer);
+		pRxTS->RxPktPendingTimer.data = (unsigned long)pRxTS;
+		pRxTS->RxPktPendingTimer.function = RxPktPendingTimeout;
+
+		ResetRxTsEntry(pRxTS);
+		list_add_tail(&pRxTS->TsCommonInfo.List, &ieee->Rx_TS_Unused_List);
+		pRxTS++;
+	}
+	// Initialize unused Rx Reorder List.
+	INIT_LIST_HEAD(&ieee->RxReorder_Unused_List);
+//#ifdef TO_DO_LIST
+	for(count = 0; count < REORDER_ENTRY_NUM; count++)
+	{
+		list_add_tail( &pRxReorderEntry->List,&ieee->RxReorder_Unused_List);
+		if(count == (REORDER_ENTRY_NUM-1))
+			break;
+		pRxReorderEntry = &ieee->RxReorderEntry[count+1];
+	}
+//#endif
+
+}
+
+void AdmitTS(struct ieee80211_device *ieee, PTS_COMMON_INFO pTsCommonInfo, u32 InactTime)
+{
+	del_timer_sync(&pTsCommonInfo->SetupTimer);
+	del_timer_sync(&pTsCommonInfo->InactTimer);
+
+	if(InactTime!=0)
+		mod_timer(&pTsCommonInfo->InactTimer, jiffies + MSECS(InactTime));
+}
+
+
+PTS_COMMON_INFO SearchAdmitTRStream(struct ieee80211_device *ieee, u8*	Addr, u8 TID, TR_SELECT	TxRxSelect)
+{
+	//DIRECTION_VALUE 	dir;
+	u8 	dir;
+	bool				search_dir[4] = {0, 0, 0, 0};
+	struct list_head*		psearch_list; //FIXME
+	PTS_COMMON_INFO	pRet = NULL;
+	if(ieee->iw_mode == IW_MODE_MASTER) //ap mode
+	{
+		if(TxRxSelect == TX_DIR)
+		{
+			search_dir[DIR_DOWN] = true;
+			search_dir[DIR_BI_DIR]= true;
+		}
+		else
+		{
+			search_dir[DIR_UP] 	= true;
+			search_dir[DIR_BI_DIR]= true;
+		}
+	}
+	else if(ieee->iw_mode == IW_MODE_ADHOC)
+	{
+		if(TxRxSelect == TX_DIR)
+			search_dir[DIR_UP] 	= true;
+		else
+			search_dir[DIR_DOWN] = true;
+	}
+	else
+	{
+		if(TxRxSelect == TX_DIR)
+		{
+			search_dir[DIR_UP] 	= true;
+			search_dir[DIR_BI_DIR]= true;
+			search_dir[DIR_DIRECT]= true;
+		}
+		else
+		{
+			search_dir[DIR_DOWN] = true;
+			search_dir[DIR_BI_DIR]= true;
+			search_dir[DIR_DIRECT]= true;
+		}
+	}
+
+	if(TxRxSelect == TX_DIR)
+		psearch_list = &ieee->Tx_TS_Admit_List;
+	else
+		psearch_list = &ieee->Rx_TS_Admit_List;
+
+	//for(dir = DIR_UP; dir <= DIR_BI_DIR; dir++)
+	for(dir = 0; dir <= DIR_BI_DIR; dir++)
+	{
+		if(search_dir[dir] ==false )
+			continue;
+		list_for_each_entry(pRet, psearch_list, List){
+	//		IEEE80211_DEBUG(IEEE80211_DL_TS, "ADD:"MAC_FMT", TID:%d, dir:%d\n", MAC_ARG(pRet->Addr), pRet->TSpec.f.TSInfo.field.ucTSID, pRet->TSpec.f.TSInfo.field.ucDirection);
+			if (memcmp(pRet->Addr, Addr, 6) == 0)
+				if (pRet->TSpec.f.TSInfo.field.ucTSID == TID)
+					if(pRet->TSpec.f.TSInfo.field.ucDirection == dir)
+					{
+	//					printk("Bingo! got it\n");
+						break;
+					}
+
+		}
+		if(&pRet->List  != psearch_list)
+			break;
+	}
+
+	if(&pRet->List  != psearch_list){
+		return pRet ;
+	}
+	else
+		return NULL;
+}
+
+void MakeTSEntry(
+		PTS_COMMON_INFO	pTsCommonInfo,
+		u8*		Addr,
+		PTSPEC_BODY	pTSPEC,
+		PQOS_TCLAS	pTCLAS,
+		u8		TCLAS_Num,
+		u8		TCLAS_Proc
+	)
+{
+	u8	count;
+
+	if(pTsCommonInfo == NULL)
+		return;
+
+	memcpy(pTsCommonInfo->Addr, Addr, 6);
+
+	if(pTSPEC != NULL)
+		memcpy((u8*)(&(pTsCommonInfo->TSpec)), (u8*)pTSPEC, sizeof(TSPEC_BODY));
+
+	for(count = 0; count < TCLAS_Num; count++)
+		memcpy((u8*)(&(pTsCommonInfo->TClass[count])), (u8*)pTCLAS, sizeof(QOS_TCLAS));
+
+	pTsCommonInfo->TClasProc = TCLAS_Proc;
+	pTsCommonInfo->TClasNum = TCLAS_Num;
+}
+
+
+bool GetTs(
+	struct ieee80211_device*	ieee,
+	PTS_COMMON_INFO			*ppTS,
+	u8*				Addr,
+	u8				TID,
+	TR_SELECT			TxRxSelect,  //Rx:1, Tx:0
+	bool				bAddNewTs
+	)
+{
+	u8	UP = 0;
+	//
+	// We do not build any TS for Broadcast or Multicast stream.
+	// So reject these kinds of search here.
+	//
+	if(is_broadcast_ether_addr(Addr) || is_multicast_ether_addr(Addr))
+	{
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, "get TS for Broadcast or Multicast\n");
+		return false;
+	}
+#if 0
+	if(ieee->pStaQos->CurrentQosMode == QOS_DISABLE)
+	{	UP = 0; } //only use one TS
+	else if(ieee->pStaQos->CurrentQosMode & QOS_WMM)
+	{
+#else
+	if (ieee->current_network.qos_data.supported == 0)
+		UP = 0;
+	else
+	{
+#endif
+		// In WMM case: we use 4 TID only
+		if (!IsACValid(TID))
+		{
+			IEEE80211_DEBUG(IEEE80211_DL_ERR, " in %s(), TID(%d) is not valid\n", __FUNCTION__, TID);
+			return false;
+		}
+
+		switch(TID)
+		{
+		case 0:
+		case 3:
+			UP = 0;
+			break;
+
+		case 1:
+		case 2:
+			UP = 2;
+			break;
+
+		case 4:
+		case 5:
+			UP = 5;
+			break;
+
+		case 6:
+		case 7:
+			UP = 7;
+			break;
+		}
+	}
+
+	*ppTS = SearchAdmitTRStream(
+			ieee,
+			Addr,
+			UP,
+			TxRxSelect);
+	if(*ppTS != NULL)
+	{
+		return true;
+	}
+	else
+	{
+		if(bAddNewTs == false)
+		{
+			IEEE80211_DEBUG(IEEE80211_DL_TS, "add new TS failed(tid:%d)\n", UP);
+			return false;
+		}
+		else
+		{
+			//
+			// Create a new Traffic stream for current Tx/Rx
+			// This is for EDCA and WMM to add a new TS.
+			// For HCCA or WMMSA, TS cannot be addmit without negotiation.
+			//
+			TSPEC_BODY	TSpec;
+			PQOS_TSINFO		pTSInfo = &TSpec.f.TSInfo;
+			struct list_head*	pUnusedList =
+								(TxRxSelect == TX_DIR)?
+								(&ieee->Tx_TS_Unused_List):
+								(&ieee->Rx_TS_Unused_List);
+
+			struct list_head*	pAddmitList =
+								(TxRxSelect == TX_DIR)?
+								(&ieee->Tx_TS_Admit_List):
+								(&ieee->Rx_TS_Admit_List);
+
+			DIRECTION_VALUE		Dir =		(ieee->iw_mode == IW_MODE_MASTER)?
+								((TxRxSelect==TX_DIR)?DIR_DOWN:DIR_UP):
+								((TxRxSelect==TX_DIR)?DIR_UP:DIR_DOWN);
+			IEEE80211_DEBUG(IEEE80211_DL_TS, "to add Ts\n");
+			if(!list_empty(pUnusedList))
+			{
+				(*ppTS) = list_entry(pUnusedList->next, TS_COMMON_INFO, List);
+				list_del_init(&(*ppTS)->List);
+				if(TxRxSelect==TX_DIR)
+				{
+					PTX_TS_RECORD tmp = container_of(*ppTS, TX_TS_RECORD, TsCommonInfo);
+					ResetTxTsEntry(tmp);
+				}
+				else{
+					PRX_TS_RECORD tmp = container_of(*ppTS, RX_TS_RECORD, TsCommonInfo);
+					ResetRxTsEntry(tmp);
+				}
+
+				IEEE80211_DEBUG(IEEE80211_DL_TS, "to init current TS, UP:%d, Dir:%d, addr:"MAC_FMT"\n", UP, Dir, MAC_ARG(Addr));
+				// Prepare TS Info releated field
+				pTSInfo->field.ucTrafficType = 0;			// Traffic type: WMM is reserved in this field
+				pTSInfo->field.ucTSID = UP;			// TSID
+				pTSInfo->field.ucDirection = Dir;			// Direction: if there is DirectLink, this need additional consideration.
+				pTSInfo->field.ucAccessPolicy = 1;		// Access policy
+				pTSInfo->field.ucAggregation = 0; 		// Aggregation
+				pTSInfo->field.ucPSB = 0; 				// Aggregation
+				pTSInfo->field.ucUP = UP;				// User priority
+				pTSInfo->field.ucTSInfoAckPolicy = 0;		// Ack policy
+				pTSInfo->field.ucSchedule = 0;			// Schedule
+
+				MakeTSEntry(*ppTS, Addr, &TSpec, NULL, 0, 0);
+				AdmitTS(ieee, *ppTS, 0);
+				list_add_tail(&((*ppTS)->List), pAddmitList);
+				// if there is DirectLink, we need to do additional operation here!!
+
+				return true;
+			}
+			else
+			{
+				IEEE80211_DEBUG(IEEE80211_DL_ERR, "in function %s() There is not enough TS record to be used!!", __FUNCTION__);
+				return false;
+			}
+		}
+	}
+}
+
+void RemoveTsEntry(
+	struct ieee80211_device*	ieee,
+	PTS_COMMON_INFO			pTs,
+	TR_SELECT			TxRxSelect
+	)
+{
+	//u32 flags = 0;
+	unsigned long flags = 0;
+	del_timer_sync(&pTs->SetupTimer);
+	del_timer_sync(&pTs->InactTimer);
+	TsInitDelBA(ieee, pTs, TxRxSelect);
+
+	if(TxRxSelect == RX_DIR)
+	{
+//#ifdef TO_DO_LIST
+		PRX_REORDER_ENTRY	pRxReorderEntry;
+		PRX_TS_RECORD 		pRxTS = (PRX_TS_RECORD)pTs;
+		if(timer_pending(&pRxTS->RxPktPendingTimer))
+			del_timer_sync(&pRxTS->RxPktPendingTimer);
+
+                while(!list_empty(&pRxTS->RxPendingPktList))
+                {
+                //      PlatformAcquireSpinLock(Adapter, RT_RX_SPINLOCK);
+                        spin_lock_irqsave(&(ieee->reorder_spinlock), flags);
+                        //pRxReorderEntry = list_entry(&pRxTS->RxPendingPktList.prev,RX_REORDER_ENTRY,List);
+			pRxReorderEntry = (PRX_REORDER_ENTRY)list_entry(pRxTS->RxPendingPktList.prev,RX_REORDER_ENTRY,List);
+                        list_del_init(&pRxReorderEntry->List);
+                        {
+                                int i = 0;
+                                struct ieee80211_rxb * prxb = pRxReorderEntry->prxb;
+				if (unlikely(!prxb))
+				{
+					spin_unlock_irqrestore(&(ieee->reorder_spinlock), flags);
+					return;
+				}
+                                for(i =0; i < prxb->nr_subframes; i++) {
+                                        dev_kfree_skb(prxb->subframes[i]);
+                                }
+                                kfree(prxb);
+                                prxb = NULL;
+                        }
+                        list_add_tail(&pRxReorderEntry->List,&ieee->RxReorder_Unused_List);
+                        //PlatformReleaseSpinLock(Adapter, RT_RX_SPINLOCK);
+                        spin_unlock_irqrestore(&(ieee->reorder_spinlock), flags);
+                }
+
+//#endif
+	}
+	else
+	{
+		PTX_TS_RECORD pTxTS = (PTX_TS_RECORD)pTs;
+		del_timer_sync(&pTxTS->TsAddBaTimer);
+	}
+}
+
+void RemovePeerTS(struct ieee80211_device* ieee, u8* Addr)
+{
+	PTS_COMMON_INFO	pTS, pTmpTS;
+	printk("===========>RemovePeerTS,"MAC_FMT"\n", MAC_ARG(Addr));
+#if 1
+	list_for_each_entry_safe(pTS, pTmpTS, &ieee->Tx_TS_Pending_List, List)
+	{
+		if (memcmp(pTS->Addr, Addr, 6) == 0)
+		{
+			RemoveTsEntry(ieee, pTS, TX_DIR);
+			list_del_init(&pTS->List);
+			list_add_tail(&pTS->List, &ieee->Tx_TS_Unused_List);
+		}
+	}
+
+	list_for_each_entry_safe(pTS, pTmpTS, &ieee->Tx_TS_Admit_List, List)
+	{
+		if (memcmp(pTS->Addr, Addr, 6) == 0)
+		{
+			printk("====>remove Tx_TS_admin_list\n");
+			RemoveTsEntry(ieee, pTS, TX_DIR);
+			list_del_init(&pTS->List);
+			list_add_tail(&pTS->List, &ieee->Tx_TS_Unused_List);
+		}
+	}
+
+	list_for_each_entry_safe(pTS, pTmpTS, &ieee->Rx_TS_Pending_List, List)
+	{
+		if (memcmp(pTS->Addr, Addr, 6) == 0)
+		{
+			RemoveTsEntry(ieee, pTS, RX_DIR);
+			list_del_init(&pTS->List);
+			list_add_tail(&pTS->List, &ieee->Rx_TS_Unused_List);
+		}
+	}
+
+	list_for_each_entry_safe(pTS, pTmpTS, &ieee->Rx_TS_Admit_List, List)
+	{
+		if (memcmp(pTS->Addr, Addr, 6) == 0)
+		{
+			RemoveTsEntry(ieee, pTS, RX_DIR);
+			list_del_init(&pTS->List);
+			list_add_tail(&pTS->List, &ieee->Rx_TS_Unused_List);
+		}
+	}
+#endif
+}
+
+void RemoveAllTS(struct ieee80211_device* ieee)
+{
+	PTS_COMMON_INFO pTS, pTmpTS;
+#if 1
+	list_for_each_entry_safe(pTS, pTmpTS, &ieee->Tx_TS_Pending_List, List)
+	{
+		RemoveTsEntry(ieee, pTS, TX_DIR);
+		list_del_init(&pTS->List);
+		list_add_tail(&pTS->List, &ieee->Tx_TS_Unused_List);
+	}
+
+	list_for_each_entry_safe(pTS, pTmpTS, &ieee->Tx_TS_Admit_List, List)
+	{
+		RemoveTsEntry(ieee, pTS, TX_DIR);
+		list_del_init(&pTS->List);
+		list_add_tail(&pTS->List, &ieee->Tx_TS_Unused_List);
+	}
+
+	list_for_each_entry_safe(pTS, pTmpTS, &ieee->Rx_TS_Pending_List, List)
+	{
+		RemoveTsEntry(ieee, pTS, RX_DIR);
+		list_del_init(&pTS->List);
+		list_add_tail(&pTS->List, &ieee->Rx_TS_Unused_List);
+	}
+
+	list_for_each_entry_safe(pTS, pTmpTS, &ieee->Rx_TS_Admit_List, List)
+	{
+		RemoveTsEntry(ieee, pTS, RX_DIR);
+		list_del_init(&pTS->List);
+		list_add_tail(&pTS->List, &ieee->Rx_TS_Unused_List);
+	}
+#endif
+}
+
+void TsStartAddBaProcess(struct ieee80211_device* ieee, PTX_TS_RECORD	pTxTS)
+{
+	if(pTxTS->bAddBaReqInProgress == false)
+	{
+		pTxTS->bAddBaReqInProgress = true;
+#if 1
+		if(pTxTS->bAddBaReqDelayed)
+		{
+			IEEE80211_DEBUG(IEEE80211_DL_BA, "TsStartAddBaProcess(): Delayed Start ADDBA after 60 sec!!\n");
+			mod_timer(&pTxTS->TsAddBaTimer, jiffies + MSECS(TS_ADDBA_DELAY));
+		}
+		else
+		{
+			IEEE80211_DEBUG(IEEE80211_DL_BA,"TsStartAddBaProcess(): Immediately Start ADDBA now!!\n");
+			mod_timer(&pTxTS->TsAddBaTimer, jiffies+10); //set 10 ticks
+		}
+#endif
+	}
+	else
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, "%s()==>BA timer is already added\n", __FUNCTION__);
+}
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+EXPORT_SYMBOL_NOVERS(RemovePeerTS);
+#else
+EXPORT_SYMBOL(RemovePeerTS);
+#endif
diff --git a/drivers/staging/rtl8192su/ieee80211/rtl_crypto.h b/drivers/staging/rtl8192su/ieee80211/rtl_crypto.h
new file mode 100644
index 00000000000..ccf6ae76357
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/rtl_crypto.h
@@ -0,0 +1,399 @@
+/*
+ * Scatterlist Cryptographic API.
+ *
+ * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
+ * Copyright (c) 2002 David S. Miller (davem@redhat.com)
+ *
+ * Portions derived from Cryptoapi, by Alexander Kjeldaas <astor@fast.no>
+ * and Nettle, by Niels Mé°ˆler.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+#ifndef _LINUX_CRYPTO_H
+#define _LINUX_CRYPTO_H
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/string.h>
+#include <asm/page.h>
+#include <asm/errno.h>
+
+#define crypto_register_alg crypto_register_alg_rsl
+#define crypto_unregister_alg crypto_unregister_alg_rsl
+#define crypto_alloc_tfm crypto_alloc_tfm_rsl
+#define crypto_free_tfm crypto_free_tfm_rsl
+#define crypto_alg_available crypto_alg_available_rsl
+
+/*
+ * Algorithm masks and types.
+ */
+#define CRYPTO_ALG_TYPE_MASK		0x000000ff
+#define CRYPTO_ALG_TYPE_CIPHER		0x00000001
+#define CRYPTO_ALG_TYPE_DIGEST		0x00000002
+#define CRYPTO_ALG_TYPE_COMPRESS	0x00000004
+
+/*
+ * Transform masks and values (for crt_flags).
+ */
+#define CRYPTO_TFM_MODE_MASK		0x000000ff
+#define CRYPTO_TFM_REQ_MASK		0x000fff00
+#define CRYPTO_TFM_RES_MASK		0xfff00000
+
+#define CRYPTO_TFM_MODE_ECB		0x00000001
+#define CRYPTO_TFM_MODE_CBC		0x00000002
+#define CRYPTO_TFM_MODE_CFB		0x00000004
+#define CRYPTO_TFM_MODE_CTR		0x00000008
+
+#define CRYPTO_TFM_REQ_WEAK_KEY		0x00000100
+#define CRYPTO_TFM_RES_WEAK_KEY		0x00100000
+#define CRYPTO_TFM_RES_BAD_KEY_LEN   	0x00200000
+#define CRYPTO_TFM_RES_BAD_KEY_SCHED 	0x00400000
+#define CRYPTO_TFM_RES_BAD_BLOCK_LEN 	0x00800000
+#define CRYPTO_TFM_RES_BAD_FLAGS 	0x01000000
+
+/*
+ * Miscellaneous stuff.
+ */
+#define CRYPTO_UNSPEC			0
+#define CRYPTO_MAX_ALG_NAME		64
+
+struct scatterlist;
+
+/*
+ * Algorithms: modular crypto algorithm implementations, managed
+ * via crypto_register_alg() and crypto_unregister_alg().
+ */
+struct cipher_alg {
+	unsigned int cia_min_keysize;
+	unsigned int cia_max_keysize;
+	int (*cia_setkey)(void *ctx, const u8 *key,
+	                  unsigned int keylen, u32 *flags);
+	void (*cia_encrypt)(void *ctx, u8 *dst, const u8 *src);
+	void (*cia_decrypt)(void *ctx, u8 *dst, const u8 *src);
+};
+
+struct digest_alg {
+	unsigned int dia_digestsize;
+	void (*dia_init)(void *ctx);
+	void (*dia_update)(void *ctx, const u8 *data, unsigned int len);
+	void (*dia_final)(void *ctx, u8 *out);
+	int (*dia_setkey)(void *ctx, const u8 *key,
+	                  unsigned int keylen, u32 *flags);
+};
+
+struct compress_alg {
+	int (*coa_init)(void *ctx);
+	void (*coa_exit)(void *ctx);
+	int (*coa_compress)(void *ctx, const u8 *src, unsigned int slen,
+	                    u8 *dst, unsigned int *dlen);
+	int (*coa_decompress)(void *ctx, const u8 *src, unsigned int slen,
+	                      u8 *dst, unsigned int *dlen);
+};
+
+#define cra_cipher	cra_u.cipher
+#define cra_digest	cra_u.digest
+#define cra_compress	cra_u.compress
+
+struct crypto_alg {
+	struct list_head cra_list;
+	u32 cra_flags;
+	unsigned int cra_blocksize;
+	unsigned int cra_ctxsize;
+	const char cra_name[CRYPTO_MAX_ALG_NAME];
+
+	union {
+		struct cipher_alg cipher;
+		struct digest_alg digest;
+		struct compress_alg compress;
+	} cra_u;
+
+	struct module *cra_module;
+};
+
+/*
+ * Algorithm registration interface.
+ */
+int crypto_register_alg(struct crypto_alg *alg);
+int crypto_unregister_alg(struct crypto_alg *alg);
+
+/*
+ * Algorithm query interface.
+ */
+int crypto_alg_available(const char *name, u32 flags);
+
+/*
+ * Transforms: user-instantiated objects which encapsulate algorithms
+ * and core processing logic.  Managed via crypto_alloc_tfm() and
+ * crypto_free_tfm(), as well as the various helpers below.
+ */
+struct crypto_tfm;
+
+struct cipher_tfm {
+	void *cit_iv;
+	unsigned int cit_ivsize;
+	u32 cit_mode;
+	int (*cit_setkey)(struct crypto_tfm *tfm,
+	                  const u8 *key, unsigned int keylen);
+	int (*cit_encrypt)(struct crypto_tfm *tfm,
+			   struct scatterlist *dst,
+			   struct scatterlist *src,
+			   unsigned int nbytes);
+	int (*cit_encrypt_iv)(struct crypto_tfm *tfm,
+	                      struct scatterlist *dst,
+	                      struct scatterlist *src,
+	                      unsigned int nbytes, u8 *iv);
+	int (*cit_decrypt)(struct crypto_tfm *tfm,
+			   struct scatterlist *dst,
+			   struct scatterlist *src,
+			   unsigned int nbytes);
+	int (*cit_decrypt_iv)(struct crypto_tfm *tfm,
+			   struct scatterlist *dst,
+			   struct scatterlist *src,
+			   unsigned int nbytes, u8 *iv);
+	void (*cit_xor_block)(u8 *dst, const u8 *src);
+};
+
+struct digest_tfm {
+	void (*dit_init)(struct crypto_tfm *tfm);
+	void (*dit_update)(struct crypto_tfm *tfm,
+	                   struct scatterlist *sg, unsigned int nsg);
+	void (*dit_final)(struct crypto_tfm *tfm, u8 *out);
+	void (*dit_digest)(struct crypto_tfm *tfm, struct scatterlist *sg,
+	                   unsigned int nsg, u8 *out);
+	int (*dit_setkey)(struct crypto_tfm *tfm,
+	                  const u8 *key, unsigned int keylen);
+#ifdef CONFIG_CRYPTO_HMAC
+	void *dit_hmac_block;
+#endif
+};
+
+struct compress_tfm {
+	int (*cot_compress)(struct crypto_tfm *tfm,
+	                    const u8 *src, unsigned int slen,
+	                    u8 *dst, unsigned int *dlen);
+	int (*cot_decompress)(struct crypto_tfm *tfm,
+	                      const u8 *src, unsigned int slen,
+	                      u8 *dst, unsigned int *dlen);
+};
+
+#define crt_cipher	crt_u.cipher
+#define crt_digest	crt_u.digest
+#define crt_compress	crt_u.compress
+
+struct crypto_tfm {
+
+	u32 crt_flags;
+
+	union {
+		struct cipher_tfm cipher;
+		struct digest_tfm digest;
+		struct compress_tfm compress;
+	} crt_u;
+
+	struct crypto_alg *__crt_alg;
+};
+
+/*
+ * Transform user interface.
+ */
+
+/*
+ * crypto_alloc_tfm() will first attempt to locate an already loaded algorithm.
+ * If that fails and the kernel supports dynamically loadable modules, it
+ * will then attempt to load a module of the same name or alias.  A refcount
+ * is grabbed on the algorithm which is then associated with the new transform.
+ *
+ * crypto_free_tfm() frees up the transform and any associated resources,
+ * then drops the refcount on the associated algorithm.
+ */
+struct crypto_tfm *crypto_alloc_tfm(const char *alg_name, u32 tfm_flags);
+void crypto_free_tfm(struct crypto_tfm *tfm);
+
+/*
+ * Transform helpers which query the underlying algorithm.
+ */
+static inline const char *crypto_tfm_alg_name(struct crypto_tfm *tfm)
+{
+	return tfm->__crt_alg->cra_name;
+}
+
+static inline const char *crypto_tfm_alg_modname(struct crypto_tfm *tfm)
+{
+	struct crypto_alg *alg = tfm->__crt_alg;
+
+	if (alg->cra_module)
+		return alg->cra_module->name;
+	else
+		return NULL;
+}
+
+static inline u32 crypto_tfm_alg_type(struct crypto_tfm *tfm)
+{
+	return tfm->__crt_alg->cra_flags & CRYPTO_ALG_TYPE_MASK;
+}
+
+static inline unsigned int crypto_tfm_alg_min_keysize(struct crypto_tfm *tfm)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER);
+	return tfm->__crt_alg->cra_cipher.cia_min_keysize;
+}
+
+static inline unsigned int crypto_tfm_alg_max_keysize(struct crypto_tfm *tfm)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER);
+	return tfm->__crt_alg->cra_cipher.cia_max_keysize;
+}
+
+static inline unsigned int crypto_tfm_alg_ivsize(struct crypto_tfm *tfm)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER);
+	return tfm->crt_cipher.cit_ivsize;
+}
+
+static inline unsigned int crypto_tfm_alg_blocksize(struct crypto_tfm *tfm)
+{
+	return tfm->__crt_alg->cra_blocksize;
+}
+
+static inline unsigned int crypto_tfm_alg_digestsize(struct crypto_tfm *tfm)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_DIGEST);
+	return tfm->__crt_alg->cra_digest.dia_digestsize;
+}
+
+/*
+ * API wrappers.
+ */
+static inline void crypto_digest_init(struct crypto_tfm *tfm)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_DIGEST);
+	tfm->crt_digest.dit_init(tfm);
+}
+
+static inline void crypto_digest_update(struct crypto_tfm *tfm,
+                                        struct scatterlist *sg,
+                                        unsigned int nsg)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_DIGEST);
+	tfm->crt_digest.dit_update(tfm, sg, nsg);
+}
+
+static inline void crypto_digest_final(struct crypto_tfm *tfm, u8 *out)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_DIGEST);
+	tfm->crt_digest.dit_final(tfm, out);
+}
+
+static inline void crypto_digest_digest(struct crypto_tfm *tfm,
+                                        struct scatterlist *sg,
+                                        unsigned int nsg, u8 *out)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_DIGEST);
+	tfm->crt_digest.dit_digest(tfm, sg, nsg, out);
+}
+
+static inline int crypto_digest_setkey(struct crypto_tfm *tfm,
+                                       const u8 *key, unsigned int keylen)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_DIGEST);
+	if (tfm->crt_digest.dit_setkey == NULL)
+		return -ENOSYS;
+	return tfm->crt_digest.dit_setkey(tfm, key, keylen);
+}
+
+static inline int crypto_cipher_setkey(struct crypto_tfm *tfm,
+                                       const u8 *key, unsigned int keylen)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER);
+	return tfm->crt_cipher.cit_setkey(tfm, key, keylen);
+}
+
+static inline int crypto_cipher_encrypt(struct crypto_tfm *tfm,
+                                        struct scatterlist *dst,
+                                        struct scatterlist *src,
+                                        unsigned int nbytes)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER);
+	return tfm->crt_cipher.cit_encrypt(tfm, dst, src, nbytes);
+}
+
+static inline int crypto_cipher_encrypt_iv(struct crypto_tfm *tfm,
+                                           struct scatterlist *dst,
+                                           struct scatterlist *src,
+                                           unsigned int nbytes, u8 *iv)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER);
+	BUG_ON(tfm->crt_cipher.cit_mode == CRYPTO_TFM_MODE_ECB);
+	return tfm->crt_cipher.cit_encrypt_iv(tfm, dst, src, nbytes, iv);
+}
+
+static inline int crypto_cipher_decrypt(struct crypto_tfm *tfm,
+                                        struct scatterlist *dst,
+                                        struct scatterlist *src,
+                                        unsigned int nbytes)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER);
+	return tfm->crt_cipher.cit_decrypt(tfm, dst, src, nbytes);
+}
+
+static inline int crypto_cipher_decrypt_iv(struct crypto_tfm *tfm,
+                                           struct scatterlist *dst,
+                                           struct scatterlist *src,
+                                           unsigned int nbytes, u8 *iv)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER);
+	BUG_ON(tfm->crt_cipher.cit_mode == CRYPTO_TFM_MODE_ECB);
+	return tfm->crt_cipher.cit_decrypt_iv(tfm, dst, src, nbytes, iv);
+}
+
+static inline void crypto_cipher_set_iv(struct crypto_tfm *tfm,
+                                        const u8 *src, unsigned int len)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER);
+	memcpy(tfm->crt_cipher.cit_iv, src, len);
+}
+
+static inline void crypto_cipher_get_iv(struct crypto_tfm *tfm,
+                                        u8 *dst, unsigned int len)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER);
+	memcpy(dst, tfm->crt_cipher.cit_iv, len);
+}
+
+static inline int crypto_comp_compress(struct crypto_tfm *tfm,
+                                       const u8 *src, unsigned int slen,
+                                       u8 *dst, unsigned int *dlen)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_COMPRESS);
+	return tfm->crt_compress.cot_compress(tfm, src, slen, dst, dlen);
+}
+
+static inline int crypto_comp_decompress(struct crypto_tfm *tfm,
+                                         const u8 *src, unsigned int slen,
+                                         u8 *dst, unsigned int *dlen)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_COMPRESS);
+	return tfm->crt_compress.cot_decompress(tfm, src, slen, dst, dlen);
+}
+
+/*
+ * HMAC support.
+ */
+#ifdef CONFIG_CRYPTO_HMAC
+void crypto_hmac_init(struct crypto_tfm *tfm, u8 *key, unsigned int *keylen);
+void crypto_hmac_update(struct crypto_tfm *tfm,
+                        struct scatterlist *sg, unsigned int nsg);
+void crypto_hmac_final(struct crypto_tfm *tfm, u8 *key,
+                       unsigned int *keylen, u8 *out);
+void crypto_hmac(struct crypto_tfm *tfm, u8 *key, unsigned int *keylen,
+                 struct scatterlist *sg, unsigned int nsg, u8 *out);
+#endif	/* CONFIG_CRYPTO_HMAC */
+
+#endif	/* _LINUX_CRYPTO_H */
+
diff --git a/drivers/staging/rtl8192su/ieee80211/scatterwalk.c b/drivers/staging/rtl8192su/ieee80211/scatterwalk.c
new file mode 100644
index 00000000000..49f401fbce8
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/scatterwalk.c
@@ -0,0 +1,126 @@
+/*
+ * Cryptographic API.
+ *
+ * Cipher operations.
+ *
+ * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
+ *               2002 Adam J. Richter <adam@yggdrasil.com>
+ *               2004 Jean-Luc Cooke <jlcooke@certainkey.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+#include "kmap_types.h"
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+#include <linux/highmem.h>
+#include <asm/scatterlist.h>
+#include "internal.h"
+#include "scatterwalk.h"
+
+enum km_type crypto_km_types[] = {
+	KM_USER0,
+	KM_USER1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,
+};
+
+void *scatterwalk_whichbuf(struct scatter_walk *walk, unsigned int nbytes, void *scratch)
+{
+	if (nbytes <= walk->len_this_page &&
+	    (((unsigned long)walk->data) & (PAGE_CACHE_SIZE - 1)) + nbytes <=
+	    PAGE_CACHE_SIZE)
+		return walk->data;
+	else
+		return scratch;
+}
+
+static void memcpy_dir(void *buf, void *sgdata, size_t nbytes, int out)
+{
+	if (out)
+		memcpy(sgdata, buf, nbytes);
+	else
+		memcpy(buf, sgdata, nbytes);
+}
+
+void scatterwalk_start(struct scatter_walk *walk, struct scatterlist *sg)
+{
+	unsigned int rest_of_page;
+
+	walk->sg = sg;
+
+	walk->page = sg->page;
+	walk->len_this_segment = sg->length;
+
+	rest_of_page = PAGE_CACHE_SIZE - (sg->offset & (PAGE_CACHE_SIZE - 1));
+	walk->len_this_page = min(sg->length, rest_of_page);
+	walk->offset = sg->offset;
+}
+
+void scatterwalk_map(struct scatter_walk *walk, int out)
+{
+	walk->data = crypto_kmap(walk->page, out) + walk->offset;
+}
+
+static void scatterwalk_pagedone(struct scatter_walk *walk, int out,
+				 unsigned int more)
+{
+	/* walk->data may be pointing the first byte of the next page;
+	   however, we know we transfered at least one byte.  So,
+	   walk->data - 1 will be a virtual address in the mapped page. */
+
+	if (out)
+		flush_dcache_page(walk->page);
+
+	if (more) {
+		walk->len_this_segment -= walk->len_this_page;
+
+		if (walk->len_this_segment) {
+			walk->page++;
+			walk->len_this_page = min(walk->len_this_segment,
+						  (unsigned)PAGE_CACHE_SIZE);
+			walk->offset = 0;
+		}
+		else
+			scatterwalk_start(walk, sg_next(walk->sg));
+	}
+}
+
+void scatterwalk_done(struct scatter_walk *walk, int out, int more)
+{
+	crypto_kunmap(walk->data, out);
+	if (walk->len_this_page == 0 || !more)
+		scatterwalk_pagedone(walk, out, more);
+}
+
+/*
+ * Do not call this unless the total length of all of the fragments
+ * has been verified as multiple of the block size.
+ */
+int scatterwalk_copychunks(void *buf, struct scatter_walk *walk,
+			   size_t nbytes, int out)
+{
+	if (buf != walk->data) {
+		while (nbytes > walk->len_this_page) {
+			memcpy_dir(buf, walk->data, walk->len_this_page, out);
+			buf += walk->len_this_page;
+			nbytes -= walk->len_this_page;
+
+			crypto_kunmap(walk->data, out);
+			scatterwalk_pagedone(walk, out, 1);
+			scatterwalk_map(walk, out);
+		}
+
+		memcpy_dir(buf, walk->data, nbytes, out);
+	}
+
+	walk->offset += nbytes;
+	walk->len_this_page -= nbytes;
+	walk->len_this_segment -= nbytes;
+	return 0;
+}
diff --git a/drivers/staging/rtl8192su/ieee80211/scatterwalk.h b/drivers/staging/rtl8192su/ieee80211/scatterwalk.h
new file mode 100644
index 00000000000..b1644651901
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211/scatterwalk.h
@@ -0,0 +1,51 @@
+/*
+ * Cryptographic API.
+ *
+ * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
+ * Copyright (c) 2002 Adam J. Richter <adam@yggdrasil.com>
+ * Copyright (c) 2004 Jean-Luc Cooke <jlcooke@certainkey.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+
+#ifndef _CRYPTO_SCATTERWALK_H
+#define _CRYPTO_SCATTERWALK_H
+#include <linux/mm.h>
+#include <asm/scatterlist.h>
+
+struct scatter_walk {
+	struct scatterlist	*sg;
+	struct page		*page;
+	void			*data;
+	unsigned int		len_this_page;
+	unsigned int		len_this_segment;
+	unsigned int		offset;
+};
+
+/* Define sg_next is an inline routine now in case we want to change
+   scatterlist to a linked list later. */
+static inline struct scatterlist *sg_next(struct scatterlist *sg)
+{
+	return sg + 1;
+}
+
+static inline int scatterwalk_samebuf(struct scatter_walk *walk_in,
+				      struct scatter_walk *walk_out,
+				      void *src_p, void *dst_p)
+{
+	return walk_in->page == walk_out->page &&
+	       walk_in->offset == walk_out->offset &&
+	       walk_in->data == src_p && walk_out->data == dst_p;
+}
+
+void *scatterwalk_whichbuf(struct scatter_walk *walk, unsigned int nbytes, void *scratch);
+void scatterwalk_start(struct scatter_walk *walk, struct scatterlist *sg);
+int scatterwalk_copychunks(void *buf, struct scatter_walk *walk, size_t nbytes, int out);
+void scatterwalk_map(struct scatter_walk *walk, int out);
+void scatterwalk_done(struct scatter_walk *walk, int out, int more);
+
+#endif  /* _CRYPTO_SCATTERWALK_H */
diff --git a/drivers/staging/rtl8192su/ieee80211_crypt.h b/drivers/staging/rtl8192su/ieee80211_crypt.h
new file mode 100644
index 00000000000..b58a3bcc0dc
--- /dev/null
+++ b/drivers/staging/rtl8192su/ieee80211_crypt.h
@@ -0,0 +1,86 @@
+/*
+ * Original code based on Host AP (software wireless LAN access point) driver
+ * for Intersil Prism2/2.5/3.
+ *
+ * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+ * <jkmaline@cc.hut.fi>
+ * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+ *
+ * Adaption to a generic IEEE 802.11 stack by James Ketrenos
+ * <jketreno@linux.intel.com>
+ *
+ * Copyright (c) 2004, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation. See README and COPYING for
+ * more details.
+ */
+
+/*
+ * This file defines the interface to the ieee80211 crypto module.
+ */
+#ifndef IEEE80211_CRYPT_H
+#define IEEE80211_CRYPT_H
+
+#include <linux/skbuff.h>
+
+struct ieee80211_crypto_ops {
+	const char *name;
+
+	/* init new crypto context (e.g., allocate private data space,
+	 * select IV, etc.); returns NULL on failure or pointer to allocated
+	 * private data on success */
+	void * (*init)(int keyidx);
+
+	/* deinitialize crypto context and free allocated private data */
+	void (*deinit)(void *priv);
+
+	/* encrypt/decrypt return < 0 on error or >= 0 on success. The return
+	 * value from decrypt_mpdu is passed as the keyidx value for
+	 * decrypt_msdu. skb must have enough head and tail room for the
+	 * encryption; if not, error will be returned; these functions are
+	 * called for all MPDUs (i.e., fragments).
+	 */
+	int (*encrypt_mpdu)(struct sk_buff *skb, int hdr_len, void *priv);
+	int (*decrypt_mpdu)(struct sk_buff *skb, int hdr_len, void *priv);
+
+	/* These functions are called for full MSDUs, i.e. full frames.
+	 * These can be NULL if full MSDU operations are not needed. */
+	int (*encrypt_msdu)(struct sk_buff *skb, int hdr_len, void *priv);
+	int (*decrypt_msdu)(struct sk_buff *skb, int keyidx, int hdr_len,
+			    void *priv);
+
+	int (*set_key)(void *key, int len, u8 *seq, void *priv);
+	int (*get_key)(void *key, int len, u8 *seq, void *priv);
+
+	/* procfs handler for printing out key information and possible
+	 * statistics */
+	char * (*print_stats)(char *p, void *priv);
+
+	/* maximum number of bytes added by encryption; encrypt buf is
+	 * allocated with extra_prefix_len bytes, copy of in_buf, and
+	 * extra_postfix_len; encrypt need not use all this space, but
+	 * the result must start at the beginning of the buffer and correct
+	 * length must be returned */
+	int extra_prefix_len, extra_postfix_len;
+
+	struct module *owner;
+};
+
+struct ieee80211_crypt_data {
+	struct list_head list; /* delayed deletion list */
+	struct ieee80211_crypto_ops *ops;
+	void *priv;
+	atomic_t refcnt;
+};
+
+int ieee80211_register_crypto_ops(struct ieee80211_crypto_ops *ops);
+int ieee80211_unregister_crypto_ops(struct ieee80211_crypto_ops *ops);
+struct ieee80211_crypto_ops * ieee80211_get_crypto_ops(const char *name);
+void ieee80211_crypt_deinit_entries(struct ieee80211_device *, int);
+void ieee80211_crypt_deinit_handler(unsigned long);
+void ieee80211_crypt_delayed_deinit(struct ieee80211_device *ieee,
+				    struct ieee80211_crypt_data **crypt);
+
+#endif
diff --git a/drivers/staging/rtl8192su/r8180_93cx6.c b/drivers/staging/rtl8192su/r8180_93cx6.c
new file mode 100644
index 00000000000..8878cfeb0fb
--- /dev/null
+++ b/drivers/staging/rtl8192su/r8180_93cx6.c
@@ -0,0 +1,146 @@
+/*
+   This files contains card eeprom (93c46 or 93c56) programming routines,
+   memory is addressed by 16 bits words.
+
+   This is part of rtl8180 OpenSource driver.
+   Copyright (C) Andrea Merello 2004  <andreamrl@tiscali.it>
+   Released under the terms of GPL (General Public Licence)
+
+   Parts of this driver are based on the GPL part of the
+   official realtek driver.
+
+   Parts of this driver are based on the rtl8180 driver skeleton
+   from Patric Schenke & Andres Salomon.
+
+   Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.
+
+   We want to tanks the Authors of those projects and the Ndiswrapper
+   project Authors.
+*/
+
+#include "r8180_93cx6.h"
+
+void eprom_cs(struct net_device *dev, short bit)
+{
+	if(bit)
+		write_nic_byte_E(dev, EPROM_CMD,
+			       (1<<EPROM_CS_SHIFT) | \
+			       read_nic_byte_E(dev, EPROM_CMD)); //enable EPROM
+	else
+		write_nic_byte_E(dev, EPROM_CMD, read_nic_byte_E(dev, EPROM_CMD)\
+			       &~(1<<EPROM_CS_SHIFT)); //disable EPROM
+
+	force_pci_posting(dev);
+	udelay(EPROM_DELAY);
+}
+
+
+void eprom_ck_cycle(struct net_device *dev)
+{
+	write_nic_byte_E(dev, EPROM_CMD,
+		       (1<<EPROM_CK_SHIFT) | read_nic_byte_E(dev,EPROM_CMD));
+	force_pci_posting(dev);
+	udelay(EPROM_DELAY);
+	write_nic_byte_E(dev, EPROM_CMD,
+		       read_nic_byte_E(dev, EPROM_CMD) &~ (1<<EPROM_CK_SHIFT));
+	force_pci_posting(dev);
+	udelay(EPROM_DELAY);
+}
+
+
+void eprom_w(struct net_device *dev,short bit)
+{
+	if(bit)
+		write_nic_byte_E(dev, EPROM_CMD, (1<<EPROM_W_SHIFT) | \
+			       read_nic_byte_E(dev,EPROM_CMD));
+	else
+		write_nic_byte_E(dev, EPROM_CMD, read_nic_byte_E(dev,EPROM_CMD)\
+			       &~(1<<EPROM_W_SHIFT));
+
+	force_pci_posting(dev);
+	udelay(EPROM_DELAY);
+}
+
+
+short eprom_r(struct net_device *dev)
+{
+	short bit;
+
+	bit=(read_nic_byte_E(dev, EPROM_CMD) & (1<<EPROM_R_SHIFT) );
+	udelay(EPROM_DELAY);
+
+	if(bit) return 1;
+	return 0;
+}
+
+
+void eprom_send_bits_string(struct net_device *dev, short b[], int len)
+{
+	int i;
+
+	for(i=0; i<len; i++){
+		eprom_w(dev, b[i]);
+		eprom_ck_cycle(dev);
+	}
+}
+
+
+u32 eprom_read(struct net_device *dev, u32 addr)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	short read_cmd[]={1,1,0};
+	short addr_str[8];
+	int i;
+	int addr_len;
+	u32 ret;
+
+	ret=0;
+        //enable EPROM programming
+	write_nic_byte_E(dev, EPROM_CMD,
+		       (EPROM_CMD_PROGRAM<<EPROM_CMD_OPERATING_MODE_SHIFT));
+	force_pci_posting(dev);
+	udelay(EPROM_DELAY);
+
+	if (priv->epromtype==EPROM_93c56){
+		addr_str[7]=addr & 1;
+		addr_str[6]=addr & (1<<1);
+		addr_str[5]=addr & (1<<2);
+		addr_str[4]=addr & (1<<3);
+		addr_str[3]=addr & (1<<4);
+		addr_str[2]=addr & (1<<5);
+		addr_str[1]=addr & (1<<6);
+		addr_str[0]=addr & (1<<7);
+		addr_len=8;
+	}else{
+		addr_str[5]=addr & 1;
+		addr_str[4]=addr & (1<<1);
+		addr_str[3]=addr & (1<<2);
+		addr_str[2]=addr & (1<<3);
+		addr_str[1]=addr & (1<<4);
+		addr_str[0]=addr & (1<<5);
+		addr_len=6;
+	}
+	eprom_cs(dev, 1);
+	eprom_ck_cycle(dev);
+	eprom_send_bits_string(dev, read_cmd, 3);
+	eprom_send_bits_string(dev, addr_str, addr_len);
+
+	//keep chip pin D to low state while reading.
+	//I'm unsure if it is necessary, but anyway shouldn't hurt
+	eprom_w(dev, 0);
+
+	for(i=0;i<16;i++){
+		//eeprom needs a clk cycle between writing opcode&adr
+		//and reading data. (eeprom outs a dummy 0)
+		eprom_ck_cycle(dev);
+		ret |= (eprom_r(dev)<<(15-i));
+	}
+
+	eprom_cs(dev, 0);
+	eprom_ck_cycle(dev);
+
+	//disable EPROM programming
+	write_nic_byte_E(dev, EPROM_CMD,
+		       (EPROM_CMD_NORMAL<<EPROM_CMD_OPERATING_MODE_SHIFT));
+	return ret;
+}
diff --git a/drivers/staging/rtl8192su/r8180_93cx6.h b/drivers/staging/rtl8192su/r8180_93cx6.h
new file mode 100644
index 00000000000..ca228d36817
--- /dev/null
+++ b/drivers/staging/rtl8192su/r8180_93cx6.h
@@ -0,0 +1,45 @@
+/*
+	This is part of rtl8187 OpenSource driver
+	Copyright (C) Andrea Merello 2004-2005  <andreamrl@tiscali.it>
+	Released under the terms of GPL (General Public Licence)
+
+	Parts of this driver are based on the GPL part of the official realtek driver
+	Parts of this driver are based on the rtl8180 driver skeleton from Patric Schenke & Andres Salomon
+	Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
+
+	We want to tanks the Authors of such projects and the Ndiswrapper project Authors.
+*/
+
+/*This files contains card eeprom (93c46 or 93c56) programming routines*/
+/*memory is addressed by WORDS*/
+
+#ifdef RTL8192SU
+#include "r8192U.h"
+#include "r8192S_hw.h"
+#else
+#include "r8192U.h"
+#include "r8192U_hw.h"
+#endif
+
+#define EPROM_DELAY 10
+
+#define EPROM_ANAPARAM_ADDRLWORD 0xd
+#define EPROM_ANAPARAM_ADDRHWORD 0xe
+
+#define EPROM_RFCHIPID 0x6
+#define EPROM_TXPW_BASE 0x05
+#define EPROM_RFCHIPID_RTL8225U 5
+#define EPROM_RF_PARAM 0x4
+#define EPROM_CONFIG2 0xc
+
+#define EPROM_VERSION 0x1E
+#define MAC_ADR 0x7
+
+#define CIS 0x18
+
+#define EPROM_TXPW0 0x16
+#define EPROM_TXPW2 0x1b
+#define EPROM_TXPW1 0x3d
+
+
+u32 eprom_read(struct net_device *dev,u32 addr); //reads a 16 bits word
diff --git a/drivers/staging/rtl8192su/r8190_rtl8256.c b/drivers/staging/rtl8192su/r8190_rtl8256.c
new file mode 100644
index 00000000000..74ff337b058
--- /dev/null
+++ b/drivers/staging/rtl8192su/r8190_rtl8256.c
@@ -0,0 +1,312 @@
+/*
+  This is part of the rtl8192 driver
+  released under the GPL (See file COPYING for details).
+
+  This files contains programming code for the rtl8256
+  radio frontend.
+
+  *Many* thanks to Realtek Corp. for their great support!
+
+*/
+
+#include "r8192U.h"
+#include "r8192U_hw.h"
+#include "r819xU_phyreg.h"
+#include "r819xU_phy.h"
+#include "r8190_rtl8256.h"
+
+/*--------------------------------------------------------------------------
+ * Overview:   	set RF band width (20M or 40M)
+ * Input:       struct net_device*	dev
+ * 		WIRELESS_BANDWIDTH_E	Bandwidth	//20M or 40M
+ * Output:      NONE
+ * Return:      NONE
+ * Note:	8226 support both 20M  and 40 MHz
+ *---------------------------------------------------------------------------*/
+void PHY_SetRF8256Bandwidth(struct net_device* dev , HT_CHANNEL_WIDTH Bandwidth)	//20M or 40M
+{
+	u8	eRFPath;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	//for(eRFPath = RF90_PATH_A; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
+	for(eRFPath = 0; eRFPath <RF90_PATH_MAX; eRFPath++)
+	{
+		if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
+				continue;
+
+		switch(Bandwidth)
+		{
+			case HT_CHANNEL_WIDTH_20:
+				if(priv->card_8192_version == VERSION_819xU_A || priv->card_8192_version == VERSION_819xU_B)// 8256 D-cut, E-cut, xiong: consider it later!
+				{
+					rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0b, bMask12Bits, 0x100); //phy para:1ba
+					rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3d7);
+					rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0e, bMask12Bits, 0x021);
+
+					//cosa add for sd3's request 01/23/2008
+					rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x5ab);
+				}
+				else
+				{
+					RT_TRACE(COMP_ERR, "PHY_SetRF8256Bandwidth(): unknown hardware version\n");
+				}
+
+				break;
+			case HT_CHANNEL_WIDTH_20_40:
+				if(priv->card_8192_version == VERSION_819xU_A ||priv->card_8192_version == VERSION_819xU_B)// 8256 D-cut, E-cut, xiong: consider it later!
+				{
+					rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0b, bMask12Bits, 0x300); //phy para:3ba
+					rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3df);
+					rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0e, bMask12Bits, 0x0a1);
+
+					//cosa add for sd3's request 01/23/2008
+					if(priv->chan == 3 || priv->chan == 9) //I need to set priv->chan whenever current channel changes
+						rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x59b);
+					else
+						rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x5ab);
+				}
+				else
+				{
+					RT_TRACE(COMP_ERR, "PHY_SetRF8256Bandwidth(): unknown hardware version\n");
+				}
+
+
+				break;
+			default:
+				RT_TRACE(COMP_ERR, "PHY_SetRF8256Bandwidth(): unknown Bandwidth: %#X\n",Bandwidth );
+				break;
+
+		}
+	}
+	return;
+}
+/*--------------------------------------------------------------------------
+ * Overview:    Interface to config 8256
+ * Input:       struct net_device*	dev
+ * Output:      NONE
+ * Return:      NONE
+ *---------------------------------------------------------------------------*/
+void PHY_RF8256_Config(struct net_device* dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	// Initialize general global value
+	//
+	// TODO: Extend RF_PATH_C and RF_PATH_D in the future
+	priv->NumTotalRFPath = RTL819X_TOTAL_RF_PATH;
+	// Config BB and RF
+	phy_RF8256_Config_ParaFile(dev);
+
+	return;
+}
+/*--------------------------------------------------------------------------
+ * Overview:    Interface to config 8256
+ * Input:       struct net_device*	dev
+ * Output:      NONE
+ * Return:      NONE
+ *---------------------------------------------------------------------------*/
+void phy_RF8256_Config_ParaFile(struct net_device* dev)
+{
+	u32 	u4RegValue = 0;
+	//static s1Byte				szRadioAFile[] = RTL819X_PHY_RADIO_A;
+	//static s1Byte				szRadioBFile[] = RTL819X_PHY_RADIO_B;
+	//static s1Byte				szRadioCFile[] = RTL819X_PHY_RADIO_C;
+	//static s1Byte				szRadioDFile[] = RTL819X_PHY_RADIO_D;
+	u8 	eRFPath;
+	BB_REGISTER_DEFINITION_T	*pPhyReg;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u32	RegOffSetToBeCheck = 0x3;
+	u32 	RegValueToBeCheck = 0x7f1;
+	u32	RF3_Final_Value = 0;
+	u8	ConstRetryTimes = 5, RetryTimes = 5;
+	u8 ret = 0;
+	//3//-----------------------------------------------------------------
+	//3// <2> Initialize RF
+	//3//-----------------------------------------------------------------
+	for(eRFPath = (RF90_RADIO_PATH_E)RF90_PATH_A; eRFPath <priv->NumTotalRFPath; eRFPath++)
+	{
+		if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
+				continue;
+
+		pPhyReg = &priv->PHYRegDef[eRFPath];
+
+		// Joseph test for shorten RF config
+	//	pHalData->RfReg0Value[eRFPath] =  rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, rGlobalCtrl, bMaskDWord);
+
+		/*----Store original RFENV control type----*/
+		switch(eRFPath)
+		{
+		case RF90_PATH_A:
+		case RF90_PATH_C:
+			u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs, bRFSI_RFENV);
+			break;
+		case RF90_PATH_B :
+		case RF90_PATH_D:
+			u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs, bRFSI_RFENV<<16);
+			break;
+		}
+
+		/*----Set RF_ENV enable----*/
+		rtl8192_setBBreg(dev, pPhyReg->rfintfe, bRFSI_RFENV<<16, 0x1);
+
+		/*----Set RF_ENV output high----*/
+		rtl8192_setBBreg(dev, pPhyReg->rfintfo, bRFSI_RFENV, 0x1);
+
+		/* Set bit number of Address and Data for RF register */
+		rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0); 	// Set 0 to 4 bits for Z-serial and set 1 to 6 bits for 8258
+		rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireDataLength, 0x0);	// Set 0 to 12 bits for Z-serial and 8258, and set 1 to 14 bits for ???
+
+		rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E) eRFPath, 0x0, bMask12Bits, 0xbf);
+
+		/*----Check RF block (for FPGA platform only)----*/
+		// TODO: this function should be removed on ASIC , Emily 2007.2.2
+		if (rtl8192_phy_checkBBAndRF(dev, HW90_BLOCK_RF, (RF90_RADIO_PATH_E)eRFPath))
+		{
+			RT_TRACE(COMP_ERR, "PHY_RF8256_Config():Check Radio[%d] Fail!!\n", eRFPath);
+			goto phy_RF8256_Config_ParaFile_Fail;
+		}
+
+		RetryTimes = ConstRetryTimes;
+		RF3_Final_Value = 0;
+		/*----Initialize RF fom connfiguration file----*/
+		switch(eRFPath)
+		{
+		case RF90_PATH_A:
+			while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0)
+			{
+				ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath);
+				RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
+				RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
+				RetryTimes--;
+			}
+			break;
+		case RF90_PATH_B:
+			while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0)
+			{
+				ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath);
+				RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
+				RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
+				RetryTimes--;
+			}
+			break;
+		case RF90_PATH_C:
+			while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0)
+			{
+				ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath);
+				RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
+				RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
+				RetryTimes--;
+			}
+			break;
+		case RF90_PATH_D:
+			while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0)
+			{
+				ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath);
+				RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
+				RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
+				RetryTimes--;
+			}
+			break;
+		}
+
+		/*----Restore RFENV control type----*/;
+		switch(eRFPath)
+		{
+		case RF90_PATH_A:
+		case RF90_PATH_C:
+			rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV, u4RegValue);
+			break;
+		case RF90_PATH_B :
+		case RF90_PATH_D:
+			rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV<<16, u4RegValue);
+			break;
+		}
+
+		if(ret){
+			RT_TRACE(COMP_ERR, "phy_RF8256_Config_ParaFile():Radio[%d] Fail!!", eRFPath);
+			goto phy_RF8256_Config_ParaFile_Fail;
+		}
+
+	}
+
+	RT_TRACE(COMP_PHY, "PHY Initialization Success\n") ;
+	return ;
+
+phy_RF8256_Config_ParaFile_Fail:
+	RT_TRACE(COMP_ERR, "PHY Initialization failed\n") ;
+	return ;
+}
+
+
+void PHY_SetRF8256CCKTxPower(struct net_device*	dev, u8	powerlevel)
+{
+	u32	TxAGC=0;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	//modified by vivi, 20080109
+	TxAGC = powerlevel;
+
+	if(priv->bDynamicTxLowPower == TRUE ) //cosa 05/22/2008 for scan
+	{
+		if(priv->CustomerID == RT_CID_819x_Netcore)
+			TxAGC = 0x22;
+		else
+		TxAGC += priv->CckPwEnl;
+	}
+
+	if(TxAGC > 0x24)
+		TxAGC = 0x24;
+	rtl8192_setBBreg(dev, rTxAGC_CCK_Mcs32, bTxAGCRateCCK, TxAGC);
+}
+
+
+void PHY_SetRF8256OFDMTxPower(struct net_device* dev, u8 powerlevel)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	//Joseph TxPower for 8192 testing
+	u32 writeVal, powerBase0, powerBase1, writeVal_tmp;
+	u8 index = 0;
+	u16 RegOffset[6] = {0xe00, 0xe04, 0xe10, 0xe14, 0xe18, 0xe1c};
+	u8 byte0, byte1, byte2, byte3;
+
+	powerBase0 = powerlevel + priv->TxPowerDiff;	//OFDM rates
+	powerBase0 = (powerBase0<<24) | (powerBase0<<16) |(powerBase0<<8) |powerBase0;
+	powerBase1 = powerlevel;							//MCS rates
+	powerBase1 = (powerBase1<<24) | (powerBase1<<16) |(powerBase1<<8) |powerBase1;
+
+	for(index=0; index<6; index++)
+	{
+		writeVal = priv->MCSTxPowerLevelOriginalOffset[index] + ((index<2)?powerBase0:powerBase1);
+		byte0 = (u8)(writeVal & 0x7f);
+		byte1 = (u8)((writeVal & 0x7f00)>>8);
+		byte2 = (u8)((writeVal & 0x7f0000)>>16);
+		byte3 = (u8)((writeVal & 0x7f000000)>>24);
+		if(byte0 > 0x24)	// Max power index = 0x24
+			byte0 = 0x24;
+		if(byte1 > 0x24)
+			byte1 = 0x24;
+		if(byte2 > 0x24)
+			byte2 = 0x24;
+		if(byte3 > 0x24)
+			byte3 = 0x24;
+
+		//for tx power track
+		if(index == 3)
+		{
+			writeVal_tmp = (byte3<<24) | (byte2<<16) |(byte1<<8) |byte0;
+			priv->Pwr_Track = writeVal_tmp;
+		}
+
+		if(priv->bDynamicTxHighPower == TRUE)     //Add by Jacken 2008/03/06
+		{
+			// Emily, 20080613. Set low tx power for both MCS and legacy OFDM
+			writeVal = 0x03030303;
+		}
+		else
+		{
+			writeVal = (byte3<<24) | (byte2<<16) |(byte1<<8) |byte0;
+		}
+		rtl8192_setBBreg(dev, RegOffset[index], 0x7f7f7f7f, writeVal);
+	}
+	return;
+
+}
+
diff --git a/drivers/staging/rtl8192su/r8190_rtl8256.h b/drivers/staging/rtl8192su/r8190_rtl8256.h
new file mode 100644
index 00000000000..5c1f650fe82
--- /dev/null
+++ b/drivers/staging/rtl8192su/r8190_rtl8256.h
@@ -0,0 +1,27 @@
+/*
+  This is part of the rtl8180-sa2400 driver
+  released under the GPL (See file COPYING for details).
+  Copyright (c) 2005 Andrea Merello <andreamrl@tiscali.it>
+
+  This files contains programming code for the rtl8256
+  radio frontend.
+
+  *Many* thanks to Realtek Corp. for their great support!
+
+*/
+
+#ifndef RTL8225H
+#define RTL8225H
+
+#ifdef RTL8190P
+#define RTL819X_TOTAL_RF_PATH 4 //for 90P
+#else
+#define RTL819X_TOTAL_RF_PATH 2 //for 8192U
+#endif
+extern void PHY_SetRF8256Bandwidth(struct net_device* dev , HT_CHANNEL_WIDTH Bandwidth);
+extern void PHY_RF8256_Config(struct net_device* dev);
+extern void phy_RF8256_Config_ParaFile(struct net_device* dev);
+extern void PHY_SetRF8256CCKTxPower(struct net_device*	dev, u8	powerlevel);
+extern void PHY_SetRF8256OFDMTxPower(struct net_device* dev, u8 powerlevel);
+
+#endif
diff --git a/drivers/staging/rtl8192su/r8192SU_HWImg.c b/drivers/staging/rtl8192su/r8192SU_HWImg.c
new file mode 100644
index 00000000000..cbb65795a30
--- /dev/null
+++ b/drivers/staging/rtl8192su/r8192SU_HWImg.c
@@ -0,0 +1,4902 @@
+/*Created on  2009/ 1/15,  3:10*/
+
+#include "r8192SU_HWImg.h"
+
+u8 Rtl8192SUFwImgArray[ImgArrayLength] = {
+0x92,0x81,0x2b,0x90,0x30,0x00,0x00,0x00,0x08,0x74,0x00,0x00,0x88,0x96,0x00,0x00,
+0x30,0x00,0x00,0x00,0x00,0x95,0x00,0x00,0x00,0x00,0x2b,0x00,0x03,0x03,0x23,0x00,
+0x92,0x81,0x02,0x01,0x00,0x00,0x12,0x04,0x00,0x00,0x00,0x00,0x00,0x07,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x01,0x01,0x01,0x00,0x00,
+0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x7f,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x1f,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x25,0xb0,0x1a,0x3c,0x80,0x03,0x5a,0x37,0x00,0x80,0x1b,0x3c,0x80,0x00,0x7b,0x37,
+0x00,0x00,0x5b,0xaf,0x25,0xb0,0x1a,0x3c,0x18,0x03,0x5a,0x37,0x00,0x80,0x1b,0x3c,
+0x80,0x00,0x7b,0x37,0x00,0x00,0x5b,0xaf,0x00,0x80,0x1a,0x3c,0x10,0x6d,0x5a,0x27,
+0x08,0x00,0x40,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x04,0x00,0xa1,0xaf,0x08,0x00,0xa2,0xaf,0x0c,0x00,0xa3,0xaf,0x10,0x00,0xa4,0xaf,
+0x14,0x00,0xa5,0xaf,0x18,0x00,0xa6,0xaf,0x1c,0x00,0xa7,0xaf,0x20,0x00,0xa8,0xaf,
+0x24,0x00,0xa9,0xaf,0x28,0x00,0xaa,0xaf,0x2c,0x00,0xab,0xaf,0x30,0x00,0xac,0xaf,
+0x34,0x00,0xad,0xaf,0x38,0x00,0xae,0xaf,0x3c,0x00,0xaf,0xaf,0x12,0x40,0x00,0x00,
+0x10,0x48,0x00,0x00,0x00,0x70,0x0a,0x40,0x40,0x00,0xb0,0xaf,0x44,0x00,0xb1,0xaf,
+0x48,0x00,0xb2,0xaf,0x4c,0x00,0xb3,0xaf,0x50,0x00,0xb4,0xaf,0x54,0x00,0xb5,0xaf,
+0x58,0x00,0xb6,0xaf,0x5c,0x00,0xb7,0xaf,0x60,0x00,0xb8,0xaf,0x64,0x00,0xb9,0xaf,
+0x68,0x00,0xbc,0xaf,0x6c,0x00,0xbd,0xaf,0x70,0x00,0xbe,0xaf,0x74,0x00,0xbf,0xaf,
+0x78,0x00,0xa8,0xaf,0x7c,0x00,0xa9,0xaf,0x80,0x00,0xaa,0xaf,0xdf,0x1a,0x00,0x08,
+0x21,0x20,0xa0,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x25,0xb0,0x06,0x3c,0x00,0x80,0x02,0x3c,0xe8,0xff,0xbd,0x27,0x18,0x03,0xc3,0x34,
+0x00,0x03,0x42,0x24,0x14,0x00,0xbf,0xaf,0x10,0x00,0xb0,0xaf,0x00,0x00,0x62,0xac,
+0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,0x42,0xb0,0x03,0x3c,
+0x03,0x00,0x63,0x34,0x00,0x00,0x62,0x90,0x02,0x80,0x0a,0x3c,0x02,0x80,0x10,0x3c,
+0xff,0x00,0x42,0x30,0x00,0x46,0x02,0x00,0x10,0x00,0x42,0x30,0x13,0x00,0x40,0x10,
+0x03,0x46,0x08,0x00,0xc4,0x7d,0x42,0x8d,0x68,0x15,0x05,0x26,0xd4,0x63,0xa4,0x94,
+0x01,0x00,0x47,0x24,0x10,0x00,0x02,0x24,0xb0,0x03,0xc9,0x34,0x00,0x00,0x62,0xa0,
+0x07,0x00,0x80,0x10,0x1c,0x03,0xc6,0x34,0xd8,0x63,0xa2,0x8c,0xd4,0x63,0xa0,0xa4,
+0xd8,0x63,0xa0,0xac,0x00,0x00,0x04,0x24,0x00,0x00,0xc2,0xac,0x00,0x00,0x20,0xad,
+0x01,0x00,0x82,0x24,0xc4,0x7d,0x47,0xad,0xd4,0x63,0xa2,0xa4,0x12,0x00,0x00,0x05,
+0x42,0xb0,0x02,0x3c,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x01,0x00,0x21,0x38,
+0x00,0x60,0x81,0x40,0x68,0x15,0x04,0x26,0x0c,0x4b,0x83,0x94,0x08,0x4b,0x85,0x94,
+0x14,0x00,0xbf,0x8f,0x10,0x00,0xb0,0x8f,0x80,0x00,0x63,0x30,0x41,0xb0,0x02,0x3c,
+0x25,0x18,0x65,0x00,0x08,0x00,0x42,0x34,0x18,0x00,0xbd,0x27,0x00,0x00,0x43,0xa4,
+0x08,0x00,0xe0,0x03,0x08,0x4b,0x83,0xa4,0x80,0xff,0x03,0x24,0x03,0x00,0x42,0x34,
+0x00,0x00,0x43,0xa0,0xc8,0x0e,0x00,0x0c,0x00,0x00,0x00,0x00,0x00,0x60,0x01,0x40,
+0x01,0x00,0x21,0x34,0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,0x68,0x15,0x04,0x26,
+0x0c,0x4b,0x83,0x94,0x08,0x4b,0x85,0x94,0x14,0x00,0xbf,0x8f,0x10,0x00,0xb0,0x8f,
+0x80,0x00,0x63,0x30,0x41,0xb0,0x02,0x3c,0x25,0x18,0x65,0x00,0x08,0x00,0x42,0x34,
+0x18,0x00,0xbd,0x27,0x00,0x00,0x43,0xa4,0x08,0x00,0xe0,0x03,0x08,0x4b,0x83,0xa4,
+0xff,0x00,0x84,0x30,0x0b,0x00,0x82,0x2c,0xff,0xff,0xe7,0x30,0x10,0x00,0xa8,0x93,
+0x19,0x00,0x40,0x10,0x21,0x18,0x00,0x00,0x02,0x80,0x03,0x3c,0x80,0x10,0x04,0x00,
+0xc0,0x91,0x63,0x24,0x21,0x10,0x43,0x00,0x00,0x00,0x44,0x8c,0x00,0x00,0x00,0x00,
+0x08,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x43,0xb0,0x02,0x3c,0x78,0x00,0x44,0x34,
+0x07,0x00,0xe2,0x30,0x00,0x00,0x85,0xac,0x04,0x00,0x86,0xac,0x04,0x00,0x40,0x18,
+0x00,0x00,0x00,0x00,0xf8,0xff,0xe2,0x30,0x08,0x00,0x42,0x24,0xff,0xff,0x47,0x30,
+0x21,0x10,0xe8,0x00,0x00,0x80,0x03,0x3c,0x08,0x00,0x82,0xac,0x25,0x10,0x43,0x00,
+0x08,0x00,0x82,0xac,0x01,0x00,0x03,0x24,0x08,0x00,0xe0,0x03,0x21,0x10,0x60,0x00,
+0x43,0xb0,0x02,0x3c,0x20,0x01,0x00,0x08,0x6c,0x00,0x44,0x34,0x43,0xb0,0x02,0x3c,
+0x20,0x01,0x00,0x08,0x60,0x00,0x44,0x34,0x43,0xb0,0x02,0x3c,0x20,0x01,0x00,0x08,
+0x54,0x00,0x44,0x34,0x43,0xb0,0x02,0x3c,0x20,0x01,0x00,0x08,0x48,0x00,0x44,0x34,
+0x43,0xb0,0x02,0x3c,0x20,0x01,0x00,0x08,0x3c,0x00,0x44,0x34,0x43,0xb0,0x02,0x3c,
+0x20,0x01,0x00,0x08,0x30,0x00,0x44,0x34,0x43,0xb0,0x02,0x3c,0x20,0x01,0x00,0x08,
+0x24,0x00,0x44,0x34,0x43,0xb0,0x02,0x3c,0x20,0x01,0x00,0x08,0x18,0x00,0x44,0x34,
+0x43,0xb0,0x02,0x3c,0x20,0x01,0x00,0x08,0x0c,0x00,0x44,0x34,0x20,0x01,0x00,0x08,
+0x43,0xb0,0x04,0x3c,0x01,0x00,0x02,0x24,0x25,0xb0,0x03,0x3c,0x04,0x20,0x82,0x00,
+0x18,0x03,0x67,0x34,0x00,0x80,0x02,0x3c,0x43,0xb0,0x03,0x3c,0x34,0x05,0x46,0x24,
+0x88,0x00,0x65,0x34,0x21,0x10,0x00,0x00,0x01,0x00,0x42,0x24,0xff,0xff,0x42,0x30,
+0x05,0x00,0x43,0x2c,0xfd,0xff,0x60,0x14,0x01,0x00,0x42,0x24,0x00,0x00,0xe6,0xac,
+0x00,0x00,0xa2,0x94,0x00,0x00,0x00,0x00,0xff,0xff,0x42,0x30,0x24,0x10,0x44,0x00,
+0xf4,0xff,0x40,0x1c,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,
+0x25,0xb0,0x08,0x3c,0x00,0x80,0x02,0x3c,0xc8,0xff,0xbd,0x27,0x18,0x03,0x03,0x35,
+0x90,0x05,0x42,0x24,0x00,0x00,0x62,0xac,0x30,0x00,0xb6,0xaf,0x28,0x00,0xb4,0xaf,
+0x24,0x00,0xb3,0xaf,0x1c,0x00,0xb1,0xaf,0x34,0x00,0xbf,0xaf,0x2c,0x00,0xb5,0xaf,
+0x20,0x00,0xb2,0xaf,0x18,0x00,0xb0,0xaf,0x0c,0x00,0xf2,0x84,0x08,0x00,0xf5,0x8c,
+0xff,0x00,0xc6,0x30,0x00,0x01,0x02,0x24,0x23,0x10,0x46,0x00,0xff,0xff,0x51,0x30,
+0xd0,0x03,0x08,0x35,0xff,0x00,0x96,0x30,0x00,0x00,0x12,0xad,0x21,0xa0,0xa0,0x00,
+0x21,0x30,0xc5,0x00,0x00,0x00,0x15,0xad,0x21,0x20,0xc0,0x02,0x21,0x28,0xa0,0x02,
+0x21,0x38,0x20,0x02,0x10,0x01,0x00,0x0c,0x10,0x00,0xa0,0xaf,0x23,0x18,0x51,0x02,
+0xff,0xff,0x82,0x32,0x00,0x94,0x03,0x00,0x03,0x94,0x12,0x00,0xa6,0x01,0x00,0x08,
+0x02,0x9a,0x02,0x00,0x28,0xb0,0x03,0x3c,0xc0,0x10,0x13,0x00,0x21,0x10,0x43,0x00,
+0x00,0x00,0x44,0x90,0x25,0xb0,0x10,0x3c,0x20,0x10,0x02,0x3c,0xff,0x00,0x93,0x30,
+0x00,0x22,0x13,0x00,0xff,0xff,0x43,0x32,0x01,0x01,0x45,0x2a,0x21,0xa0,0x82,0x00,
+0x21,0xa8,0xb1,0x02,0xd0,0x03,0x02,0x36,0x00,0x01,0x11,0x24,0x0b,0x88,0x65,0x00,
+0x21,0x20,0xc0,0x02,0x00,0x00,0x53,0xac,0x4d,0x01,0x00,0x0c,0xb0,0x03,0x10,0x36,
+0x21,0x30,0x80,0x02,0x21,0x20,0xc0,0x02,0x21,0x28,0xa0,0x02,0x21,0x38,0x20,0x02,
+0x10,0x01,0x00,0x0c,0x10,0x00,0xa0,0xaf,0x23,0x18,0x51,0x02,0x00,0x94,0x03,0x00,
+0x03,0x94,0x12,0x00,0x00,0x00,0x12,0xae,0xe2,0xff,0x40,0x1e,0x00,0x00,0x00,0x00,
+0x34,0x00,0xbf,0x8f,0x30,0x00,0xb6,0x8f,0x2c,0x00,0xb5,0x8f,0x28,0x00,0xb4,0x8f,
+0x24,0x00,0xb3,0x8f,0x20,0x00,0xb2,0x8f,0x1c,0x00,0xb1,0x8f,0x18,0x00,0xb0,0x8f,
+0x08,0x00,0xe0,0x03,0x38,0x00,0xbd,0x27,0xc8,0xff,0xbd,0x27,0x02,0x80,0x02,0x3c,
+0x25,0xb0,0x04,0x3c,0x20,0x00,0xb2,0xaf,0x68,0x15,0x52,0x24,0x00,0x80,0x02,0x3c,
+0x18,0x03,0x83,0x34,0xc8,0x06,0x42,0x24,0x28,0x00,0xb4,0xaf,0x24,0x00,0xb3,0xaf,
+0x30,0x00,0xbf,0xaf,0x2c,0x00,0xb5,0xaf,0x1c,0x00,0xb1,0xaf,0x18,0x00,0xb0,0xaf,
+0x00,0x00,0x62,0xac,0xb0,0x03,0x93,0x34,0x21,0xa0,0x40,0x02,0x54,0x64,0x42,0x8e,
+0xc0,0x64,0x50,0x8e,0x21,0x20,0x00,0x00,0x00,0x00,0x62,0xae,0x58,0x64,0x42,0xae,
+0x00,0x00,0x70,0xae,0x4d,0x01,0x00,0x0c,0x00,0x00,0x00,0x00,0xc0,0x64,0x44,0x8e,
+0xc4,0x64,0x43,0x8e,0x20,0x00,0x84,0x24,0x3f,0x00,0x62,0x24,0x2b,0x10,0x44,0x00,
+0x0a,0x18,0x82,0x00,0xc0,0x64,0x43,0xae,0xc0,0x64,0x85,0x8e,0x00,0x00,0x00,0x00,
+0x00,0x00,0x65,0xae,0x02,0x80,0x02,0x3c,0xff,0xff,0x10,0x32,0x25,0x80,0x02,0x02,
+0x00,0x00,0x70,0xae,0x0c,0x00,0x02,0x92,0xff,0x00,0x15,0x24,0x21,0x20,0x00,0x00,
+0x00,0x00,0x62,0xae,0x0c,0x00,0x11,0x92,0x20,0x10,0x02,0x3c,0x20,0x00,0x07,0x24,
+0x00,0x1a,0x11,0x00,0x21,0x18,0x62,0x00,0x05,0x00,0x35,0x12,0x21,0x30,0x60,0x00,
+0x08,0x64,0x91,0xa2,0x54,0x64,0x83,0xae,0x10,0x01,0x00,0x0c,0x10,0x00,0xa0,0xaf,
+0x04,0x00,0x04,0x8e,0x08,0x00,0x03,0x8e,0xff,0xe0,0x02,0x3c,0xff,0xff,0x42,0x34,
+0x1f,0x00,0x84,0x30,0x24,0x18,0x62,0x00,0x00,0x26,0x04,0x00,0xff,0xdf,0x02,0x3c,
+0x25,0x18,0x64,0x00,0xff,0xff,0x42,0x34,0x24,0x18,0x62,0x00,0x00,0x40,0x04,0x3c,
+0x25,0x18,0x64,0x00,0xc0,0xff,0x02,0x24,0x24,0x18,0x62,0x00,0x08,0x00,0x03,0xae,
+0xc9,0x64,0x84,0x92,0x2a,0xb0,0x02,0x3c,0x01,0x00,0x03,0x24,0x01,0x00,0x84,0x24,
+0x01,0x00,0x42,0x34,0x00,0x00,0x43,0xa0,0xc4,0xff,0x35,0x16,0xc9,0x64,0x84,0xa2,
+0xfc,0x4a,0x82,0x8e,0x41,0xb0,0x03,0x3c,0x30,0x00,0xbf,0x8f,0x00,0x38,0x42,0x34,
+0x00,0x00,0x62,0xac,0x2c,0x00,0xb5,0x8f,0xfc,0x4a,0x82,0xae,0x24,0x00,0xb3,0x8f,
+0x28,0x00,0xb4,0x8f,0x20,0x00,0xb2,0x8f,0x1c,0x00,0xb1,0x8f,0x18,0x00,0xb0,0x8f,
+0x08,0x00,0xe0,0x03,0x38,0x00,0xbd,0x27,0x25,0xb0,0x04,0x3c,0x00,0x80,0x02,0x3c,
+0xc8,0xff,0xbd,0x27,0x18,0x03,0x83,0x34,0x38,0x08,0x42,0x24,0x34,0x00,0xbf,0xaf,
+0x30,0x00,0xb6,0xaf,0x2c,0x00,0xb5,0xaf,0x28,0x00,0xb4,0xaf,0x24,0x00,0xb3,0xaf,
+0x20,0x00,0xb2,0xaf,0x1c,0x00,0xb1,0xaf,0x18,0x00,0xb0,0xaf,0x00,0x00,0x62,0xac,
+0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,0x02,0x80,0x16,0x3c,
+0x68,0x15,0xd2,0x26,0xb0,0x03,0x93,0x34,0x2d,0x02,0x00,0x08,0x21,0xa8,0x40,0x02,
+0x2a,0xb0,0x02,0x3c,0x08,0x00,0x04,0xae,0x09,0x00,0x42,0x34,0x01,0x00,0x03,0x24,
+0x02,0x00,0x04,0x24,0x00,0x00,0x43,0xa0,0x00,0x00,0x44,0xa0,0x42,0x00,0x34,0x12,
+0x00,0x00,0x00,0x00,0x6c,0x64,0x42,0x8e,0xd8,0x64,0x50,0x8e,0x01,0x00,0x04,0x24,
+0x00,0x00,0x62,0xae,0x70,0x64,0x42,0xae,0x00,0x00,0x70,0xae,0x4d,0x01,0x00,0x0c,
+0x00,0x00,0x00,0x00,0xd8,0x64,0x44,0x8e,0xdc,0x64,0x43,0x8e,0x20,0x00,0x84,0x24,
+0x3f,0x00,0x62,0x24,0x2b,0x10,0x44,0x00,0x0a,0x18,0x82,0x00,0xd8,0x64,0x43,0xae,
+0xd8,0x64,0xa5,0x8e,0x00,0x00,0x00,0x00,0x00,0x00,0x65,0xae,0x02,0x80,0x02,0x3c,
+0xff,0xff,0x10,0x32,0x25,0x80,0x02,0x02,0x00,0x00,0x70,0xae,0x0c,0x00,0x02,0x92,
+0xff,0x00,0x14,0x24,0x01,0x00,0x04,0x24,0x00,0x00,0x62,0xae,0x0c,0x00,0x11,0x92,
+0x20,0x10,0x02,0x3c,0x20,0x00,0x07,0x24,0x00,0x1a,0x11,0x00,0x21,0x18,0x62,0x00,
+0x05,0x00,0x34,0x12,0x21,0x30,0x60,0x00,0x6c,0x64,0xa3,0xae,0x10,0x64,0xb1,0xa2,
+0x10,0x01,0x00,0x0c,0x10,0x00,0xa0,0xaf,0x04,0x00,0x04,0x8e,0x08,0x00,0x03,0x8e,
+0xff,0xe0,0x02,0x3c,0xff,0xff,0x42,0x34,0x1f,0x00,0x84,0x30,0x24,0x18,0x62,0x00,
+0x00,0x26,0x04,0x00,0xff,0xdf,0x02,0x3c,0x25,0x18,0x64,0x00,0xff,0xff,0x42,0x34,
+0x24,0x18,0x62,0x00,0x00,0x40,0x04,0x3c,0x25,0x18,0x64,0x00,0xc0,0xff,0x05,0x24,
+0x82,0x11,0x03,0x00,0x24,0x20,0x65,0x00,0x01,0x00,0x42,0x30,0xc0,0xff,0x40,0x10,
+0x04,0x00,0x84,0x34,0x2a,0xb0,0x02,0x3c,0x08,0x00,0x03,0xae,0x09,0x00,0x42,0x34,
+0x01,0x00,0x03,0x24,0x02,0x00,0x04,0x24,0x00,0x00,0x43,0xa0,0x00,0x00,0x44,0xa0,
+0xc0,0xff,0x34,0x16,0x00,0x00,0x00,0x00,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,
+0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,0x68,0x15,0xc2,0x26,0xfc,0x4a,0x43,0x8c,
+0x34,0x00,0xbf,0x8f,0x30,0x00,0xb6,0x8f,0x2c,0x00,0xb5,0x8f,0x28,0x00,0xb4,0x8f,
+0x24,0x00,0xb3,0x8f,0x20,0x00,0xb2,0x8f,0x1c,0x00,0xb1,0x8f,0x18,0x00,0xb0,0x8f,
+0x00,0x38,0x63,0x34,0x41,0xb0,0x04,0x3c,0x38,0x00,0xbd,0x27,0x00,0x00,0x83,0xac,
+0x08,0x00,0xe0,0x03,0xfc,0x4a,0x43,0xac,0x25,0xb0,0x04,0x3c,0x00,0x80,0x02,0x3c,
+0xc0,0xff,0xbd,0x27,0x18,0x03,0x83,0x34,0x08,0x0a,0x42,0x24,0x38,0x00,0xbf,0xaf,
+0x34,0x00,0xb7,0xaf,0x30,0x00,0xb6,0xaf,0x2c,0x00,0xb5,0xaf,0x28,0x00,0xb4,0xaf,
+0x24,0x00,0xb3,0xaf,0x20,0x00,0xb2,0xaf,0x1c,0x00,0xb1,0xaf,0x18,0x00,0xb0,0xaf,
+0x00,0x00,0x62,0xac,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,
+0x02,0x80,0x17,0x3c,0x68,0x15,0xf2,0x26,0xb0,0x03,0x93,0x34,0x02,0x80,0x14,0x3c,
+0xab,0x02,0x00,0x08,0x21,0xb0,0x40,0x02,0x2a,0xb0,0x03,0x3c,0x08,0x00,0x04,0xae,
+0x05,0x00,0x63,0x34,0x01,0x00,0x02,0x24,0x02,0x00,0x04,0x24,0x00,0x00,0x62,0xa0,
+0x00,0x00,0x64,0xa0,0xca,0x7d,0x82,0x96,0x00,0x00,0x00,0x00,0x01,0x00,0x42,0x24,
+0xca,0x7d,0x82,0xa6,0xca,0x7d,0x83,0x96,0x25,0xb0,0x02,0x3c,0x66,0x03,0x42,0x34,
+0x00,0x00,0x43,0xa4,0x4a,0x00,0x35,0x12,0x00,0x00,0x00,0x00,0x60,0x64,0x42,0x8e,
+0xcc,0x64,0x50,0x8e,0x01,0x00,0x04,0x24,0x00,0x00,0x62,0xae,0x64,0x64,0x42,0xae,
+0x00,0x00,0x70,0xae,0x4d,0x01,0x00,0x0c,0x00,0x00,0x00,0x00,0xcc,0x64,0x44,0x8e,
+0xd0,0x64,0x43,0x8e,0x20,0x00,0x84,0x24,0x3f,0x00,0x62,0x24,0x2b,0x10,0x44,0x00,
+0x0a,0x18,0x82,0x00,0xcc,0x64,0x43,0xae,0xcc,0x64,0xc5,0x8e,0x00,0x00,0x00,0x00,
+0x00,0x00,0x65,0xae,0x02,0x80,0x02,0x3c,0xff,0xff,0x10,0x32,0x25,0x80,0x02,0x02,
+0x00,0x00,0x70,0xae,0x0c,0x00,0x02,0x92,0xff,0x00,0x15,0x24,0x01,0x00,0x04,0x24,
+0x00,0x00,0x62,0xae,0x0c,0x00,0x11,0x92,0x20,0x10,0x02,0x3c,0x20,0x00,0x07,0x24,
+0x00,0x1a,0x11,0x00,0x21,0x18,0x62,0x00,0x05,0x00,0x35,0x12,0x21,0x30,0x60,0x00,
+0x60,0x64,0xc3,0xae,0x0c,0x64,0xd1,0xa2,0x10,0x01,0x00,0x0c,0x10,0x00,0xa0,0xaf,
+0x04,0x00,0x04,0x8e,0x08,0x00,0x03,0x8e,0xff,0xe0,0x02,0x3c,0xff,0xff,0x42,0x34,
+0x1f,0x00,0x84,0x30,0x24,0x18,0x62,0x00,0x00,0x26,0x04,0x00,0xff,0xdf,0x02,0x3c,
+0x25,0x18,0x64,0x00,0xff,0xff,0x42,0x34,0x24,0x18,0x62,0x00,0x00,0x40,0x04,0x3c,
+0x25,0x18,0x64,0x00,0xc0,0xff,0x05,0x24,0x82,0x11,0x03,0x00,0x24,0x20,0x65,0x00,
+0x01,0x00,0x42,0x30,0xb8,0xff,0x40,0x10,0x04,0x00,0x84,0x34,0x08,0x00,0x03,0xae,
+0x2a,0xb0,0x03,0x3c,0x05,0x00,0x63,0x34,0x01,0x00,0x02,0x24,0x02,0x00,0x04,0x24,
+0x00,0x00,0x62,0xa0,0x00,0x00,0x64,0xa0,0xca,0x7d,0x82,0x96,0x00,0x00,0x00,0x00,
+0x01,0x00,0x42,0x24,0xca,0x7d,0x82,0xa6,0xca,0x7d,0x83,0x96,0x25,0xb0,0x02,0x3c,
+0x66,0x03,0x42,0x34,0x00,0x00,0x43,0xa4,0xb8,0xff,0x35,0x16,0x00,0x00,0x00,0x00,
+0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,
+0x68,0x15,0xe2,0x26,0xfc,0x4a,0x43,0x8c,0x38,0x00,0xbf,0x8f,0x34,0x00,0xb7,0x8f,
+0x30,0x00,0xb6,0x8f,0x2c,0x00,0xb5,0x8f,0x28,0x00,0xb4,0x8f,0x24,0x00,0xb3,0x8f,
+0x20,0x00,0xb2,0x8f,0x1c,0x00,0xb1,0x8f,0x18,0x00,0xb0,0x8f,0x00,0x38,0x63,0x34,
+0x41,0xb0,0x04,0x3c,0x40,0x00,0xbd,0x27,0x00,0x00,0x83,0xac,0x08,0x00,0xe0,0x03,
+0xfc,0x4a,0x43,0xac,0xc0,0xff,0xbd,0x27,0x2c,0x00,0xb5,0xaf,0x38,0x00,0xbf,0xaf,
+0x34,0x00,0xb7,0xaf,0x30,0x00,0xb6,0xaf,0x28,0x00,0xb4,0xaf,0x24,0x00,0xb3,0xaf,
+0x20,0x00,0xb2,0xaf,0x1c,0x00,0xb1,0xaf,0x18,0x00,0xb0,0xaf,0x02,0x80,0x06,0x3c,
+0x7c,0x7e,0xc5,0x90,0x00,0x80,0x03,0x3c,0x25,0xb0,0x02,0x3c,0x18,0x03,0x42,0x34,
+0x24,0x0c,0x63,0x24,0x40,0x00,0xa4,0x30,0x00,0x00,0x43,0xac,0x21,0xa8,0x00,0x00,
+0x03,0x00,0x80,0x10,0x7f,0x00,0xa2,0x30,0xbf,0x00,0xa2,0x30,0x01,0x00,0x15,0x24,
+0x7c,0x7e,0xc2,0xa0,0x7c,0x7e,0xc2,0x90,0x25,0xb0,0x04,0x3c,0x88,0x02,0x83,0x34,
+0x00,0x00,0x62,0xac,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,
+0x02,0x80,0x16,0x3c,0x68,0x15,0xd2,0x26,0xb0,0x03,0x93,0x34,0x02,0x80,0x14,0x3c,
+0x43,0x03,0x00,0x08,0x21,0xb8,0x40,0x02,0x24,0x10,0xa2,0x00,0x04,0x00,0x42,0x34,
+0x2a,0xb0,0x07,0x3c,0x08,0x00,0x02,0xae,0x0d,0x00,0xe2,0x34,0x04,0x00,0x43,0x24,
+0x0b,0x10,0x75,0x00,0x01,0x00,0x04,0x24,0x02,0x00,0x03,0x24,0x00,0x00,0x44,0xa0,
+0x00,0x00,0x43,0xa0,0xca,0x7d,0x84,0x96,0x25,0xb0,0x06,0x3c,0x66,0x03,0xc5,0x34,
+0x01,0x00,0x84,0x24,0xca,0x7d,0x84,0xa6,0xca,0x7d,0x82,0x96,0xff,0x00,0x03,0x24,
+0x00,0x00,0xa2,0xa4,0x5a,0x00,0x23,0x12,0x00,0x00,0x00,0x00,0x24,0x64,0x42,0x8e,
+0x90,0x64,0x50,0x8e,0x03,0x00,0x04,0x24,0x00,0x00,0x62,0xae,0x28,0x64,0x42,0xae,
+0x00,0x00,0x70,0xae,0x4d,0x01,0x00,0x0c,0x00,0x00,0x00,0x00,0x90,0x64,0x44,0x8e,
+0x94,0x64,0x43,0x8e,0x20,0x00,0x84,0x24,0x3f,0x00,0x62,0x24,0x2b,0x10,0x44,0x00,
+0x0a,0x18,0x82,0x00,0x90,0x64,0x43,0xae,0x90,0x64,0xe2,0x8e,0x00,0x00,0x00,0x00,
+0x00,0x00,0x62,0xae,0x02,0x80,0x02,0x3c,0xff,0xff,0x10,0x32,0x25,0x80,0x02,0x02,
+0x00,0x00,0x70,0xae,0x0c,0x00,0x02,0x92,0x00,0x00,0x00,0x00,0x00,0x00,0x62,0xae,
+0x0c,0x00,0x11,0x92,0xff,0x00,0x02,0x24,0x0d,0x00,0x22,0x12,0x00,0x12,0x11,0x00,
+0x20,0x10,0x03,0x3c,0x21,0x10,0x43,0x00,0x5a,0x00,0xa0,0x12,0x24,0x64,0xe2,0xae,
+0xec,0x63,0xf1,0xa2,0x68,0x15,0xc2,0x26,0x24,0x64,0x46,0x8c,0x90,0x64,0x45,0x8c,
+0x03,0x00,0x04,0x24,0x20,0x00,0x07,0x24,0x10,0x01,0x00,0x0c,0x10,0x00,0xa0,0xaf,
+0x04,0x00,0x04,0x8e,0x14,0x00,0x03,0x8e,0x08,0x00,0x05,0x8e,0xff,0xe0,0x02,0x3c,
+0x1f,0x00,0x84,0x30,0x42,0x1a,0x03,0x00,0xff,0xff,0x42,0x34,0x00,0x26,0x04,0x00,
+0x24,0x28,0xa2,0x00,0x3f,0x00,0x63,0x30,0x25,0x28,0xa4,0x00,0x0c,0x00,0x63,0x28,
+0x06,0x00,0x60,0x14,0x21,0x20,0xa0,0x00,0x00,0x00,0x02,0x96,0x00,0x00,0x00,0x00,
+0xfd,0x0f,0x42,0x28,0x08,0x00,0x40,0x14,0x82,0x11,0x05,0x00,0xff,0xdf,0x02,0x3c,
+0xff,0xff,0x42,0x34,0x24,0x28,0x82,0x00,0x00,0x40,0x03,0x3c,0x25,0x20,0xa3,0x00,
+0x21,0x28,0x80,0x00,0x82,0x11,0x05,0x00,0x01,0x00,0x42,0x30,0xa6,0xff,0x40,0x10,
+0xc0,0xff,0x02,0x24,0x2a,0xb0,0x07,0x3c,0x0d,0x00,0xe2,0x34,0x04,0x00,0x43,0x24,
+0x08,0x00,0x04,0xae,0x0b,0x10,0x75,0x00,0x01,0x00,0x04,0x24,0x02,0x00,0x03,0x24,
+0x00,0x00,0x44,0xa0,0x00,0x00,0x43,0xa0,0xca,0x7d,0x84,0x96,0x25,0xb0,0x06,0x3c,
+0x66,0x03,0xc5,0x34,0x01,0x00,0x84,0x24,0xca,0x7d,0x84,0xa6,0xca,0x7d,0x82,0x96,
+0xff,0x00,0x03,0x24,0x00,0x00,0xa2,0xa4,0xa8,0xff,0x23,0x16,0x00,0x00,0x00,0x00,
+0x22,0x00,0xa0,0x12,0x68,0x15,0xc2,0x26,0xec,0x63,0x43,0x90,0x41,0x00,0xe4,0x34,
+0xb0,0x03,0xc5,0x34,0x00,0x00,0x83,0xa0,0x00,0x00,0xa3,0xac,0x00,0x60,0x01,0x40,
+0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,
+0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,0x68,0x15,0xc5,0x26,0xfc,0x4a,0xa4,0x8c,
+0x01,0x00,0x02,0x3c,0x38,0x00,0xbf,0x8f,0x34,0x00,0xb7,0x8f,0x30,0x00,0xb6,0x8f,
+0x2c,0x00,0xb5,0x8f,0x28,0x00,0xb4,0x8f,0x24,0x00,0xb3,0x8f,0x20,0x00,0xb2,0x8f,
+0x1c,0x00,0xb1,0x8f,0x18,0x00,0xb0,0x8f,0x00,0x80,0x42,0x34,0x25,0x20,0x82,0x00,
+0x41,0xb0,0x03,0x3c,0x40,0x00,0xbd,0x27,0x00,0x00,0x64,0xac,0x08,0x00,0xe0,0x03,
+0xfc,0x4a,0xa4,0xac,0x65,0x03,0x00,0x08,0xe8,0x63,0xf1,0xa2,0xe8,0x63,0x43,0x90,
+0x40,0x00,0xe4,0x34,0xb0,0x03,0xc5,0x34,0x00,0x00,0x83,0xa0,0x00,0x00,0xa3,0xac,
+0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,0x00,0x60,0x01,0x40,
+0x01,0x00,0x21,0x34,0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,0x68,0x15,0xc5,0x26,
+0xfc,0x4a,0xa4,0x8c,0x01,0x00,0x02,0x3c,0x38,0x00,0xbf,0x8f,0x34,0x00,0xb7,0x8f,
+0x30,0x00,0xb6,0x8f,0x2c,0x00,0xb5,0x8f,0x28,0x00,0xb4,0x8f,0x24,0x00,0xb3,0x8f,
+0x20,0x00,0xb2,0x8f,0x1c,0x00,0xb1,0x8f,0x18,0x00,0xb0,0x8f,0x00,0x80,0x42,0x34,
+0x25,0x20,0x82,0x00,0x41,0xb0,0x03,0x3c,0x40,0x00,0xbd,0x27,0x00,0x00,0x64,0xac,
+0x08,0x00,0xe0,0x03,0xfc,0x4a,0xa4,0xac,0xc0,0xff,0xbd,0x27,0x2c,0x00,0xb5,0xaf,
+0x38,0x00,0xbf,0xaf,0x34,0x00,0xb7,0xaf,0x30,0x00,0xb6,0xaf,0x28,0x00,0xb4,0xaf,
+0x24,0x00,0xb3,0xaf,0x20,0x00,0xb2,0xaf,0x1c,0x00,0xb1,0xaf,0x18,0x00,0xb0,0xaf,
+0x02,0x80,0x06,0x3c,0x7c,0x7e,0xc5,0x90,0x00,0x80,0x03,0x3c,0x25,0xb0,0x02,0x3c,
+0x18,0x03,0x42,0x34,0x78,0x0f,0x63,0x24,0x10,0x00,0xa4,0x30,0x00,0x00,0x43,0xac,
+0x21,0xa8,0x00,0x00,0x03,0x00,0x80,0x10,0xdf,0x00,0xa2,0x30,0xef,0x00,0xa2,0x30,
+0x01,0x00,0x15,0x24,0x7c,0x7e,0xc2,0xa0,0x7c,0x7e,0xc3,0x90,0x25,0xb0,0x02,0x3c,
+0xb0,0x03,0x42,0x34,0x00,0x00,0x43,0xac,0x00,0x00,0x43,0xac,0x00,0x60,0x01,0x40,
+0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,0x02,0x80,0x16,0x3c,0x68,0x15,0xd2,0x26,
+0x21,0x98,0x40,0x00,0x02,0x80,0x14,0x3c,0x19,0x04,0x00,0x08,0x21,0xb8,0x40,0x02,
+0x24,0x10,0xa2,0x00,0x04,0x00,0x42,0x34,0x2a,0xb0,0x07,0x3c,0x08,0x00,0x02,0xae,
+0x15,0x00,0xe2,0x34,0x04,0x00,0x43,0x24,0x0b,0x10,0x75,0x00,0x01,0x00,0x04,0x24,
+0x02,0x00,0x03,0x24,0x00,0x00,0x44,0xa0,0x00,0x00,0x43,0xa0,0xca,0x7d,0x84,0x96,
+0x25,0xb0,0x06,0x3c,0x66,0x03,0xc5,0x34,0x01,0x00,0x84,0x24,0xca,0x7d,0x84,0xa6,
+0xca,0x7d,0x82,0x96,0xff,0x00,0x03,0x24,0x00,0x00,0xa2,0xa4,0x5a,0x00,0x23,0x12,
+0x00,0x00,0x00,0x00,0x30,0x64,0x42,0x8e,0x9c,0x64,0x50,0x8e,0x04,0x00,0x04,0x24,
+0x00,0x00,0x62,0xae,0x34,0x64,0x42,0xae,0x00,0x00,0x70,0xae,0x4d,0x01,0x00,0x0c,
+0x00,0x00,0x00,0x00,0x9c,0x64,0x44,0x8e,0xa0,0x64,0x43,0x8e,0x20,0x00,0x84,0x24,
+0x3f,0x00,0x62,0x24,0x2b,0x10,0x44,0x00,0x0a,0x18,0x82,0x00,0x9c,0x64,0x43,0xae,
+0x9c,0x64,0xe2,0x8e,0x00,0x00,0x00,0x00,0x00,0x00,0x62,0xae,0x02,0x80,0x02,0x3c,
+0xff,0xff,0x10,0x32,0x25,0x80,0x02,0x02,0x00,0x00,0x70,0xae,0x0c,0x00,0x02,0x92,
+0x00,0x00,0x00,0x00,0x00,0x00,0x62,0xae,0x0c,0x00,0x11,0x92,0xff,0x00,0x02,0x24,
+0x0d,0x00,0x22,0x12,0x00,0x12,0x11,0x00,0x20,0x10,0x03,0x3c,0x21,0x10,0x43,0x00,
+0x59,0x00,0xa0,0x12,0x30,0x64,0xe2,0xae,0xf4,0x63,0xf1,0xa2,0x68,0x15,0xc2,0x26,
+0x30,0x64,0x46,0x8c,0x9c,0x64,0x45,0x8c,0x04,0x00,0x04,0x24,0x20,0x00,0x07,0x24,
+0x10,0x01,0x00,0x0c,0x10,0x00,0xa0,0xaf,0x04,0x00,0x04,0x8e,0x14,0x00,0x03,0x8e,
+0x08,0x00,0x05,0x8e,0xff,0xe0,0x02,0x3c,0x1f,0x00,0x84,0x30,0x42,0x1a,0x03,0x00,
+0xff,0xff,0x42,0x34,0x00,0x26,0x04,0x00,0x24,0x28,0xa2,0x00,0x3f,0x00,0x63,0x30,
+0x25,0x28,0xa4,0x00,0x0c,0x00,0x63,0x28,0x06,0x00,0x60,0x14,0x21,0x20,0xa0,0x00,
+0x00,0x00,0x02,0x96,0x00,0x00,0x00,0x00,0xfd,0x0f,0x42,0x28,0x08,0x00,0x40,0x14,
+0x82,0x11,0x05,0x00,0xff,0xdf,0x02,0x3c,0xff,0xff,0x42,0x34,0x24,0x28,0x82,0x00,
+0x00,0x40,0x03,0x3c,0x25,0x20,0xa3,0x00,0x21,0x28,0x80,0x00,0x82,0x11,0x05,0x00,
+0x01,0x00,0x42,0x30,0xa6,0xff,0x40,0x10,0xc0,0xff,0x02,0x24,0x2a,0xb0,0x07,0x3c,
+0x15,0x00,0xe2,0x34,0x04,0x00,0x43,0x24,0x08,0x00,0x04,0xae,0x0b,0x10,0x75,0x00,
+0x01,0x00,0x04,0x24,0x02,0x00,0x03,0x24,0x00,0x00,0x44,0xa0,0x00,0x00,0x43,0xa0,
+0xca,0x7d,0x84,0x96,0x25,0xb0,0x06,0x3c,0x66,0x03,0xc5,0x34,0x01,0x00,0x84,0x24,
+0xca,0x7d,0x84,0xa6,0xca,0x7d,0x82,0x96,0xff,0x00,0x03,0x24,0x00,0x00,0xa2,0xa4,
+0xa8,0xff,0x23,0x16,0x00,0x00,0x00,0x00,0x21,0x00,0xa0,0x12,0x68,0x15,0xc2,0x26,
+0xf4,0x63,0x43,0x90,0x43,0x00,0xe4,0x34,0xb0,0x03,0xc5,0x34,0x00,0x00,0x83,0xa0,
+0x00,0x00,0xa3,0xac,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,
+0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,
+0x68,0x15,0xc5,0x26,0xfc,0x4a,0xa2,0x8c,0x38,0x00,0xbf,0x8f,0x34,0x00,0xb7,0x8f,
+0x30,0x00,0xb6,0x8f,0x2c,0x00,0xb5,0x8f,0x28,0x00,0xb4,0x8f,0x24,0x00,0xb3,0x8f,
+0x20,0x00,0xb2,0x8f,0x1c,0x00,0xb1,0x8f,0x18,0x00,0xb0,0x8f,0x06,0x00,0x03,0x3c,
+0x25,0x10,0x43,0x00,0x41,0xb0,0x04,0x3c,0x40,0x00,0xbd,0x27,0x00,0x00,0x82,0xac,
+0x08,0x00,0xe0,0x03,0xfc,0x4a,0xa2,0xac,0x3b,0x04,0x00,0x08,0xf0,0x63,0xf1,0xa2,
+0xf0,0x63,0x43,0x90,0x42,0x00,0xe4,0x34,0xb0,0x03,0xc5,0x34,0x00,0x00,0x83,0xa0,
+0x00,0x00,0xa3,0xac,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,
+0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,
+0x68,0x15,0xc5,0x26,0xfc,0x4a,0xa2,0x8c,0x38,0x00,0xbf,0x8f,0x34,0x00,0xb7,0x8f,
+0x30,0x00,0xb6,0x8f,0x2c,0x00,0xb5,0x8f,0x28,0x00,0xb4,0x8f,0x24,0x00,0xb3,0x8f,
+0x20,0x00,0xb2,0x8f,0x1c,0x00,0xb1,0x8f,0x18,0x00,0xb0,0x8f,0x06,0x00,0x03,0x3c,
+0x25,0x10,0x43,0x00,0x41,0xb0,0x04,0x3c,0x40,0x00,0xbd,0x27,0x00,0x00,0x82,0xac,
+0x08,0x00,0xe0,0x03,0xfc,0x4a,0xa2,0xac,0xc0,0xff,0xbd,0x27,0x2c,0x00,0xb5,0xaf,
+0x38,0x00,0xbf,0xaf,0x34,0x00,0xb7,0xaf,0x30,0x00,0xb6,0xaf,0x28,0x00,0xb4,0xaf,
+0x24,0x00,0xb3,0xaf,0x20,0x00,0xb2,0xaf,0x1c,0x00,0xb1,0xaf,0x18,0x00,0xb0,0xaf,
+0x02,0x80,0x06,0x3c,0x7c,0x7e,0xc5,0x90,0x00,0x80,0x03,0x3c,0x25,0xb0,0x02,0x3c,
+0x18,0x03,0x42,0x34,0xc8,0x12,0x63,0x24,0x01,0x00,0xa4,0x30,0x00,0x00,0x43,0xac,
+0x21,0xa8,0x00,0x00,0x03,0x00,0x80,0x10,0xf7,0x00,0xa2,0x30,0xfe,0x00,0xa2,0x30,
+0x01,0x00,0x15,0x24,0x7c,0x7e,0xc2,0xa0,0x7c,0x7e,0xc3,0x90,0x25,0xb0,0x02,0x3c,
+0xb0,0x03,0x42,0x34,0x00,0x00,0x43,0xac,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,
+0x00,0x60,0x81,0x40,0x02,0x80,0x16,0x3c,0x68,0x15,0xd2,0x26,0x21,0x98,0x40,0x00,
+0x02,0x80,0x14,0x3c,0xf8,0x04,0x00,0x08,0x21,0xb8,0x40,0x02,0x00,0x00,0x02,0x96,
+0x00,0x00,0x00,0x00,0xfd,0x0f,0x42,0x28,0x54,0x00,0x40,0x10,0xff,0xdf,0x02,0x3c,
+0x00,0x20,0x02,0x3c,0x25,0x28,0xa2,0x00,0x82,0x11,0x05,0x00,0x01,0x00,0x42,0x30,
+0x57,0x00,0x40,0x14,0x2a,0xb0,0x07,0x3c,0xc0,0xff,0x02,0x24,0x24,0x10,0xa2,0x00,
+0x04,0x00,0x42,0x34,0x2a,0xb0,0x07,0x3c,0x08,0x00,0x02,0xae,0x1d,0x00,0xe2,0x34,
+0x04,0x00,0x43,0x24,0x0b,0x10,0x75,0x00,0x01,0x00,0x04,0x24,0x02,0x00,0x03,0x24,
+0x00,0x00,0x44,0xa0,0x00,0x00,0x43,0xa0,0xca,0x7d,0x84,0x96,0x25,0xb0,0x06,0x3c,
+0x66,0x03,0xc5,0x34,0x01,0x00,0x84,0x24,0xca,0x7d,0x84,0xa6,0xca,0x7d,0x82,0x96,
+0xff,0x00,0x03,0x24,0x00,0x00,0xa2,0xa4,0x53,0x00,0x23,0x12,0x00,0x00,0x00,0x00,
+0x3c,0x64,0x42,0x8e,0xa8,0x64,0x50,0x8e,0x05,0x00,0x04,0x24,0x00,0x00,0x62,0xae,
+0x40,0x64,0x42,0xae,0x00,0x00,0x70,0xae,0x4d,0x01,0x00,0x0c,0x00,0x00,0x00,0x00,
+0xa8,0x64,0x44,0x8e,0xac,0x64,0x43,0x8e,0x20,0x00,0x84,0x24,0x3f,0x00,0x62,0x24,
+0x2b,0x10,0x44,0x00,0x0a,0x18,0x82,0x00,0xa8,0x64,0x43,0xae,0xa8,0x64,0xe2,0x8e,
+0x00,0x00,0x00,0x00,0x00,0x00,0x62,0xae,0x02,0x80,0x02,0x3c,0xff,0xff,0x10,0x32,
+0x25,0x80,0x02,0x02,0x00,0x00,0x70,0xae,0x0c,0x00,0x02,0x92,0x00,0x00,0x00,0x00,
+0x00,0x00,0x62,0xae,0x0c,0x00,0x11,0x92,0xff,0x00,0x02,0x24,0x0d,0x00,0x22,0x12,
+0x00,0x12,0x11,0x00,0x20,0x10,0x03,0x3c,0x21,0x10,0x43,0x00,0x52,0x00,0xa0,0x12,
+0x3c,0x64,0xe2,0xae,0x04,0x64,0xf1,0xa2,0x68,0x15,0xc2,0x26,0x3c,0x64,0x46,0x8c,
+0xa8,0x64,0x45,0x8c,0x05,0x00,0x04,0x24,0x20,0x00,0x07,0x24,0x10,0x01,0x00,0x0c,
+0x10,0x00,0xa0,0xaf,0x14,0x00,0x03,0x8e,0x04,0x00,0x04,0x8e,0x08,0x00,0x05,0x8e,
+0x42,0x1a,0x03,0x00,0xff,0xe0,0x02,0x3c,0x1f,0x00,0x84,0x30,0x3f,0x00,0x63,0x30,
+0xff,0xff,0x42,0x34,0x24,0x28,0xa2,0x00,0x00,0x26,0x04,0x00,0x0c,0x00,0x63,0x28,
+0xaa,0xff,0x60,0x10,0x25,0x28,0xa4,0x00,0xff,0xdf,0x02,0x3c,0xff,0xff,0x42,0x34,
+0x24,0x10,0xa2,0x00,0x00,0x40,0x03,0x3c,0x25,0x28,0x43,0x00,0x82,0x11,0x05,0x00,
+0x01,0x00,0x42,0x30,0xad,0xff,0x40,0x10,0xc0,0xff,0x02,0x24,0x2a,0xb0,0x07,0x3c,
+0x1d,0x00,0xe2,0x34,0x04,0x00,0x43,0x24,0x0b,0x10,0x75,0x00,0x01,0x00,0x04,0x24,
+0x02,0x00,0x03,0x24,0x08,0x00,0x05,0xae,0x00,0x00,0x44,0xa0,0x00,0x00,0x43,0xa0,
+0xca,0x7d,0x84,0x96,0x25,0xb0,0x06,0x3c,0x66,0x03,0xc5,0x34,0x01,0x00,0x84,0x24,
+0xca,0x7d,0x84,0xa6,0xca,0x7d,0x82,0x96,0xff,0x00,0x03,0x24,0x00,0x00,0xa2,0xa4,
+0xaf,0xff,0x23,0x16,0x00,0x00,0x00,0x00,0x21,0x00,0xa0,0x12,0x68,0x15,0xc2,0x26,
+0x04,0x64,0x43,0x90,0x45,0x00,0xe4,0x34,0xb0,0x03,0xc5,0x34,0x00,0x00,0x83,0xa0,
+0x00,0x00,0xa3,0xac,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,
+0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,
+0x68,0x15,0xc5,0x26,0xfc,0x4a,0xa2,0x8c,0x38,0x00,0xbf,0x8f,0x34,0x00,0xb7,0x8f,
+0x30,0x00,0xb6,0x8f,0x2c,0x00,0xb5,0x8f,0x28,0x00,0xb4,0x8f,0x24,0x00,0xb3,0x8f,
+0x20,0x00,0xb2,0x8f,0x1c,0x00,0xb1,0x8f,0x18,0x00,0xb0,0x8f,0x18,0x00,0x03,0x3c,
+0x25,0x10,0x43,0x00,0x41,0xb0,0x04,0x3c,0x40,0x00,0xbd,0x27,0x00,0x00,0x82,0xac,
+0x08,0x00,0xe0,0x03,0xfc,0x4a,0xa2,0xac,0x1a,0x05,0x00,0x08,0xf8,0x63,0xf1,0xa2,
+0xf8,0x63,0x43,0x90,0x44,0x00,0xe4,0x34,0xb0,0x03,0xc5,0x34,0x00,0x00,0x83,0xa0,
+0x00,0x00,0xa3,0xac,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,
+0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,
+0x68,0x15,0xc5,0x26,0xfc,0x4a,0xa2,0x8c,0x38,0x00,0xbf,0x8f,0x34,0x00,0xb7,0x8f,
+0x30,0x00,0xb6,0x8f,0x2c,0x00,0xb5,0x8f,0x28,0x00,0xb4,0x8f,0x24,0x00,0xb3,0x8f,
+0x20,0x00,0xb2,0x8f,0x1c,0x00,0xb1,0x8f,0x18,0x00,0xb0,0x8f,0x18,0x00,0x03,0x3c,
+0x25,0x10,0x43,0x00,0x41,0xb0,0x04,0x3c,0x40,0x00,0xbd,0x27,0x00,0x00,0x82,0xac,
+0x08,0x00,0xe0,0x03,0xfc,0x4a,0xa2,0xac,0xc0,0xff,0xbd,0x27,0x2c,0x00,0xb5,0xaf,
+0x38,0x00,0xbf,0xaf,0x34,0x00,0xb7,0xaf,0x30,0x00,0xb6,0xaf,0x28,0x00,0xb4,0xaf,
+0x24,0x00,0xb3,0xaf,0x20,0x00,0xb2,0xaf,0x1c,0x00,0xb1,0xaf,0x18,0x00,0xb0,0xaf,
+0x02,0x80,0x06,0x3c,0x7c,0x7e,0xc5,0x90,0x00,0x80,0x03,0x3c,0x25,0xb0,0x02,0x3c,
+0x18,0x03,0x42,0x34,0x28,0x16,0x63,0x24,0x02,0x00,0xa4,0x30,0x00,0x00,0x43,0xac,
+0x21,0xa8,0x00,0x00,0x03,0x00,0x80,0x10,0xfb,0x00,0xa2,0x30,0xfd,0x00,0xa2,0x30,
+0x01,0x00,0x15,0x24,0x7c,0x7e,0xc2,0xa0,0x7c,0x7e,0xc3,0x90,0x25,0xb0,0x02,0x3c,
+0xb0,0x03,0x42,0x34,0x00,0x00,0x43,0xac,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,
+0x00,0x60,0x81,0x40,0x02,0x80,0x16,0x3c,0x68,0x15,0xd2,0x26,0x21,0x98,0x40,0x00,
+0x02,0x80,0x14,0x3c,0xd0,0x05,0x00,0x08,0x21,0xb8,0x40,0x02,0x00,0x00,0x02,0x96,
+0x00,0x00,0x00,0x00,0xfd,0x0f,0x42,0x28,0x54,0x00,0x40,0x10,0xff,0xdf,0x02,0x3c,
+0x00,0x20,0x02,0x3c,0x25,0x28,0xa2,0x00,0x82,0x11,0x05,0x00,0x01,0x00,0x42,0x30,
+0x57,0x00,0x40,0x14,0x2a,0xb0,0x07,0x3c,0xc0,0xff,0x02,0x24,0x24,0x10,0xa2,0x00,
+0x04,0x00,0x42,0x34,0x2a,0xb0,0x07,0x3c,0x08,0x00,0x02,0xae,0x25,0x00,0xe2,0x34,
+0x04,0x00,0x43,0x24,0x0b,0x10,0x75,0x00,0x01,0x00,0x04,0x24,0x02,0x00,0x03,0x24,
+0x00,0x00,0x44,0xa0,0x00,0x00,0x43,0xa0,0xca,0x7d,0x84,0x96,0x25,0xb0,0x06,0x3c,
+0x66,0x03,0xc5,0x34,0x01,0x00,0x84,0x24,0xca,0x7d,0x84,0xa6,0xca,0x7d,0x82,0x96,
+0xff,0x00,0x03,0x24,0x00,0x00,0xa2,0xa4,0x53,0x00,0x23,0x12,0x00,0x00,0x00,0x00,
+0x48,0x64,0x42,0x8e,0xb4,0x64,0x50,0x8e,0x06,0x00,0x04,0x24,0x00,0x00,0x62,0xae,
+0x4c,0x64,0x42,0xae,0x00,0x00,0x70,0xae,0x4d,0x01,0x00,0x0c,0x00,0x00,0x00,0x00,
+0xb4,0x64,0x44,0x8e,0xb8,0x64,0x43,0x8e,0x20,0x00,0x84,0x24,0x3f,0x00,0x62,0x24,
+0x2b,0x10,0x44,0x00,0x0a,0x18,0x82,0x00,0xb4,0x64,0x43,0xae,0xb4,0x64,0xe2,0x8e,
+0x00,0x00,0x00,0x00,0x00,0x00,0x62,0xae,0x02,0x80,0x02,0x3c,0xff,0xff,0x10,0x32,
+0x25,0x80,0x02,0x02,0x00,0x00,0x70,0xae,0x0c,0x00,0x02,0x92,0x00,0x00,0x00,0x00,
+0x00,0x00,0x62,0xae,0x0c,0x00,0x11,0x92,0xff,0x00,0x02,0x24,0x0d,0x00,0x22,0x12,
+0x00,0x12,0x11,0x00,0x20,0x10,0x03,0x3c,0x21,0x10,0x43,0x00,0x52,0x00,0xa0,0x12,
+0x48,0x64,0xe2,0xae,0x00,0x64,0xf1,0xa2,0x68,0x15,0xc2,0x26,0x48,0x64,0x46,0x8c,
+0xb4,0x64,0x45,0x8c,0x06,0x00,0x04,0x24,0x20,0x00,0x07,0x24,0x10,0x01,0x00,0x0c,
+0x10,0x00,0xa0,0xaf,0x14,0x00,0x03,0x8e,0x04,0x00,0x04,0x8e,0x08,0x00,0x05,0x8e,
+0x42,0x1a,0x03,0x00,0xff,0xe0,0x02,0x3c,0x1f,0x00,0x84,0x30,0x3f,0x00,0x63,0x30,
+0xff,0xff,0x42,0x34,0x24,0x28,0xa2,0x00,0x00,0x26,0x04,0x00,0x0c,0x00,0x63,0x28,
+0xaa,0xff,0x60,0x10,0x25,0x28,0xa4,0x00,0xff,0xdf,0x02,0x3c,0xff,0xff,0x42,0x34,
+0x24,0x10,0xa2,0x00,0x00,0x40,0x03,0x3c,0x25,0x28,0x43,0x00,0x82,0x11,0x05,0x00,
+0x01,0x00,0x42,0x30,0xad,0xff,0x40,0x10,0xc0,0xff,0x02,0x24,0x2a,0xb0,0x07,0x3c,
+0x25,0x00,0xe2,0x34,0x04,0x00,0x43,0x24,0x0b,0x10,0x75,0x00,0x01,0x00,0x04,0x24,
+0x02,0x00,0x03,0x24,0x08,0x00,0x05,0xae,0x00,0x00,0x44,0xa0,0x00,0x00,0x43,0xa0,
+0xca,0x7d,0x84,0x96,0x25,0xb0,0x06,0x3c,0x66,0x03,0xc5,0x34,0x01,0x00,0x84,0x24,
+0xca,0x7d,0x84,0xa6,0xca,0x7d,0x82,0x96,0xff,0x00,0x03,0x24,0x00,0x00,0xa2,0xa4,
+0xaf,0xff,0x23,0x16,0x00,0x00,0x00,0x00,0x21,0x00,0xa0,0x12,0x68,0x15,0xc2,0x26,
+0x00,0x64,0x43,0x90,0x47,0x00,0xe4,0x34,0xb0,0x03,0xc5,0x34,0x00,0x00,0x83,0xa0,
+0x00,0x00,0xa3,0xac,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,
+0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,
+0x68,0x15,0xc5,0x26,0xfc,0x4a,0xa2,0x8c,0x38,0x00,0xbf,0x8f,0x34,0x00,0xb7,0x8f,
+0x30,0x00,0xb6,0x8f,0x2c,0x00,0xb5,0x8f,0x28,0x00,0xb4,0x8f,0x24,0x00,0xb3,0x8f,
+0x20,0x00,0xb2,0x8f,0x1c,0x00,0xb1,0x8f,0x18,0x00,0xb0,0x8f,0x60,0x00,0x03,0x3c,
+0x25,0x10,0x43,0x00,0x41,0xb0,0x04,0x3c,0x40,0x00,0xbd,0x27,0x00,0x00,0x82,0xac,
+0x08,0x00,0xe0,0x03,0xfc,0x4a,0xa2,0xac,0xf2,0x05,0x00,0x08,0xfc,0x63,0xf1,0xa2,
+0xfc,0x63,0x43,0x90,0x46,0x00,0xe4,0x34,0xb0,0x03,0xc5,0x34,0x00,0x00,0x83,0xa0,
+0x00,0x00,0xa3,0xac,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,
+0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,
+0x68,0x15,0xc5,0x26,0xfc,0x4a,0xa2,0x8c,0x38,0x00,0xbf,0x8f,0x34,0x00,0xb7,0x8f,
+0x30,0x00,0xb6,0x8f,0x2c,0x00,0xb5,0x8f,0x28,0x00,0xb4,0x8f,0x24,0x00,0xb3,0x8f,
+0x20,0x00,0xb2,0x8f,0x1c,0x00,0xb1,0x8f,0x18,0x00,0xb0,0x8f,0x60,0x00,0x03,0x3c,
+0x25,0x10,0x43,0x00,0x41,0xb0,0x04,0x3c,0x40,0x00,0xbd,0x27,0x00,0x00,0x82,0xac,
+0x08,0x00,0xe0,0x03,0xfc,0x4a,0xa2,0xac,0x00,0x80,0x03,0x3c,0x25,0xb0,0x02,0x3c,
+0x88,0x19,0x63,0x24,0x18,0x03,0x42,0x34,0x00,0x00,0x43,0xac,0x00,0x60,0x01,0x40,
+0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,
+0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,0x02,0x80,0x05,0x3c,0x68,0x15,0xa5,0x24,
+0x04,0x4b,0xa2,0x8c,0xfc,0x4a,0xa4,0x8c,0x00,0x08,0x03,0x3c,0x24,0x10,0x43,0x00,
+0x25,0x20,0x82,0x00,0x41,0xb0,0x03,0x3c,0x00,0x00,0x64,0xac,0x08,0x00,0xe0,0x03,
+0xfc,0x4a,0xa4,0xac,0x25,0xb0,0x04,0x3c,0x00,0x80,0x02,0x3c,0xc0,0xff,0xbd,0x27,
+0x18,0x03,0x83,0x34,0xe4,0x19,0x42,0x24,0x3c,0x00,0xbf,0xaf,0x38,0x00,0xbe,0xaf,
+0x34,0x00,0xb7,0xaf,0x30,0x00,0xb6,0xaf,0x2c,0x00,0xb5,0xaf,0x28,0x00,0xb4,0xaf,
+0x24,0x00,0xb3,0xaf,0x20,0x00,0xb2,0xaf,0x1c,0x00,0xb1,0xaf,0x18,0x00,0xb0,0xaf,
+0x00,0x00,0x62,0xac,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,
+0x02,0x80,0x02,0x3c,0x2a,0xb0,0x03,0x3c,0x68,0x15,0x51,0x24,0xb0,0x03,0x93,0x34,
+0x2c,0x00,0x77,0x34,0x02,0x80,0x15,0x3c,0x02,0x80,0x16,0x3c,0x9c,0x06,0x00,0x08,
+0x02,0x80,0x1e,0x3c,0x14,0x64,0x26,0x92,0xe4,0x64,0x25,0x8e,0x00,0x32,0x06,0x00,
+0x21,0x30,0xc2,0x00,0x78,0x64,0x26,0xae,0x10,0x01,0x00,0x0c,0x10,0x00,0xa0,0xaf,
+0xe4,0x64,0x30,0x8e,0x0a,0x00,0x04,0x24,0x21,0x90,0x00,0x00,0x00,0x00,0x70,0xae,
+0x4d,0x01,0x00,0x0c,0xff,0xff,0x10,0x32,0x02,0x80,0x02,0x3c,0x25,0x80,0x02,0x02,
+0x0c,0x00,0x05,0x92,0x02,0x00,0x04,0x92,0xff,0x00,0x02,0x24,0xff,0x00,0xa3,0x30,
+0x04,0x00,0x62,0x10,0x21,0x80,0x04,0x02,0x00,0x00,0x63,0xae,0x01,0x00,0x12,0x24,
+0x14,0x64,0x25,0xa2,0x88,0x96,0xb0,0xae,0x21,0x28,0x00,0x02,0x02,0x00,0xa2,0x90,
+0x08,0x00,0x10,0x26,0x21,0x20,0x00,0x02,0xff,0x00,0x42,0x30,0x00,0x00,0x62,0xae,
+0x03,0x00,0xa3,0x90,0x00,0x00,0x00,0x00,0x7f,0x00,0x63,0x30,0x00,0x00,0x63,0xae,
+0x00,0x00,0x72,0xae,0x03,0x00,0xa2,0x90,0x84,0x96,0xc3,0x92,0x02,0x00,0xa2,0x90,
+0x00,0x00,0x00,0x00,0xff,0x00,0x42,0x30,0x2c,0x00,0x42,0x28,0x11,0x00,0x40,0x10,
+0x08,0x00,0x02,0x24,0x03,0x00,0xa2,0x90,0x00,0x00,0x00,0x00,0x7f,0x00,0x42,0x30,
+0x84,0x96,0xc2,0xa2,0x02,0x00,0xa3,0x90,0x02,0x80,0x02,0x3c,0x74,0x84,0x42,0x24,
+0xff,0x00,0x63,0x30,0xc0,0x18,0x03,0x00,0x21,0x18,0x62,0x00,0x04,0x00,0x62,0x8c,
+0x00,0x00,0x00,0x00,0x09,0xf8,0x40,0x00,0x80,0x96,0xc2,0xaf,0x21,0xa0,0x40,0x00,
+0x08,0x00,0x02,0x24,0x0a,0x00,0x04,0x24,0x05,0x00,0x82,0x12,0x00,0x01,0x07,0x24,
+0x01,0x00,0x02,0x24,0x02,0x00,0x03,0x24,0x01,0x00,0xe2,0xa2,0x01,0x00,0xe3,0xa2,
+0xbc,0xff,0x40,0x16,0x20,0x10,0x02,0x3c,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,
+0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,0xfc,0x4a,0x22,0x8e,0x00,0x04,0x03,0x3c,
+0x41,0xb0,0x04,0x3c,0x25,0x10,0x43,0x00,0x00,0x00,0x82,0xac,0x3c,0x00,0xbf,0x8f,
+0xfc,0x4a,0x22,0xae,0x38,0x00,0xbe,0x8f,0x34,0x00,0xb7,0x8f,0x30,0x00,0xb6,0x8f,
+0x2c,0x00,0xb5,0x8f,0x28,0x00,0xb4,0x8f,0x24,0x00,0xb3,0x8f,0x20,0x00,0xb2,0x8f,
+0x1c,0x00,0xb1,0x8f,0x18,0x00,0xb0,0x8f,0x08,0x00,0xe0,0x03,0x40,0x00,0xbd,0x27,
+0xc8,0xff,0xbd,0x27,0xff,0xff,0xa8,0x30,0x02,0x80,0x02,0x3c,0x25,0x40,0x02,0x01,
+0x30,0x00,0xb6,0xaf,0x20,0x00,0xb2,0xaf,0x34,0x00,0xbf,0xaf,0x2c,0x00,0xb5,0xaf,
+0x28,0x00,0xb4,0xaf,0x24,0x00,0xb3,0xaf,0x1c,0x00,0xb1,0xaf,0x18,0x00,0xb0,0xaf,
+0x00,0x00,0x03,0x8d,0xff,0xff,0xd2,0x30,0x21,0xb0,0xa0,0x00,0x00,0xc0,0x02,0x24,
+0x08,0x00,0x45,0x26,0x04,0x00,0x06,0x8d,0x24,0x18,0x62,0x00,0xff,0x3f,0xa5,0x30,
+0xf0,0xff,0x02,0x3c,0x25,0x18,0x65,0x00,0xff,0xff,0x42,0x34,0x24,0x18,0x62,0x00,
+0x00,0x80,0x05,0x3c,0x25,0x18,0x65,0x00,0xff,0x01,0xc6,0x34,0x00,0x00,0x03,0xad,
+0x04,0x00,0x06,0xad,0x21,0x48,0x80,0x00,0xff,0xff,0xe7,0x30,0x18,0x00,0x12,0xa5,
+0x1a,0x00,0x07,0xa1,0x18,0x00,0x03,0x8d,0xff,0x7f,0x02,0x3c,0xff,0xff,0x42,0x34,
+0x24,0x18,0x62,0x00,0x02,0x80,0x15,0x3c,0x18,0x00,0x03,0xad,0x68,0x15,0xa5,0x26,
+0xd6,0x63,0xa3,0x90,0x00,0x00,0x00,0x00,0x01,0x00,0x62,0x24,0xd6,0x63,0xa2,0xa0,
+0x18,0x00,0x04,0x8d,0xff,0x80,0x02,0x3c,0x20,0x00,0x45,0x26,0xff,0xff,0x42,0x34,
+0x7f,0x00,0x63,0x30,0xff,0xff,0xb2,0x30,0x24,0x20,0x82,0x00,0x00,0x1e,0x03,0x00,
+0x25,0xb0,0x02,0x3c,0xc0,0x00,0x42,0x34,0x25,0x20,0x83,0x00,0x07,0x00,0x45,0x32,
+0x18,0x00,0x04,0xad,0x00,0x00,0x52,0xa4,0x03,0x00,0xa0,0x10,0xff,0xff,0x42,0x32,
+0x08,0x00,0x42,0x26,0xff,0xff,0x42,0x30,0x68,0x15,0xb4,0x26,0x54,0x65,0x86,0x8e,
+0x58,0x65,0x90,0x8e,0xf8,0xff,0x52,0x30,0x21,0x10,0xd2,0x00,0x2b,0x10,0x02,0x02,
+0x31,0x00,0x40,0x10,0xff,0x00,0x33,0x31,0x23,0x80,0x06,0x02,0x21,0x28,0xc0,0x02,
+0xff,0xff,0x07,0x32,0x01,0x00,0x11,0x24,0x21,0x20,0x60,0x02,0x10,0x01,0x00,0x0c,
+0x10,0x00,0xb1,0xaf,0x23,0x18,0x50,0x02,0xff,0xff,0x72,0x30,0x22,0x10,0x02,0x3c,
+0x21,0x10,0x42,0x02,0x21,0x20,0x60,0x02,0x4d,0x01,0x00,0x0c,0x54,0x65,0x82,0xae,
+0x21,0x28,0xd0,0x02,0x21,0x38,0x40,0x02,0x21,0x20,0x60,0x02,0x10,0x00,0xb1,0xaf,
+0x22,0x10,0x06,0x3c,0x10,0x01,0x00,0x0c,0x68,0x15,0xb1,0x26,0x54,0x65,0x23,0x8e,
+0x25,0xb0,0x10,0x3c,0xb0,0x03,0x02,0x36,0x21,0x20,0x60,0x02,0x00,0x00,0x43,0xac,
+0x4d,0x01,0x00,0x0c,0x00,0x00,0x00,0x00,0x54,0x65,0x25,0x8e,0xec,0x00,0x02,0x36,
+0xbd,0x00,0x04,0x36,0x00,0x00,0x45,0xac,0x00,0x00,0x83,0x90,0xc2,0x00,0x10,0x36,
+0x34,0x00,0xbf,0x8f,0x10,0x00,0x63,0x34,0x00,0x00,0x83,0xa0,0x30,0x00,0xb6,0x8f,
+0x00,0x00,0x05,0xa6,0x2c,0x00,0xb5,0x8f,0x28,0x00,0xb4,0x8f,0x24,0x00,0xb3,0x8f,
+0x20,0x00,0xb2,0x8f,0x1c,0x00,0xb1,0x8f,0x18,0x00,0xb0,0x8f,0x01,0x00,0x02,0x24,
+0x08,0x00,0xe0,0x03,0x38,0x00,0xbd,0x27,0x21,0x28,0xc0,0x02,0x21,0x20,0x60,0x02,
+0x21,0x38,0x40,0x02,0x01,0x00,0x02,0x24,0x10,0x01,0x00,0x0c,0x10,0x00,0xa2,0xaf,
+0x54,0x65,0x83,0x8e,0x68,0x15,0xb1,0x26,0x25,0xb0,0x10,0x3c,0x21,0x18,0x72,0x00,
+0x54,0x65,0x83,0xae,0x54,0x65,0x23,0x8e,0xb0,0x03,0x02,0x36,0x21,0x20,0x60,0x02,
+0x00,0x00,0x43,0xac,0x4d,0x01,0x00,0x0c,0x00,0x00,0x00,0x00,0x54,0x65,0x25,0x8e,
+0xec,0x00,0x02,0x36,0xbd,0x00,0x04,0x36,0x00,0x00,0x45,0xac,0x00,0x00,0x83,0x90,
+0xc2,0x00,0x10,0x36,0x34,0x00,0xbf,0x8f,0x10,0x00,0x63,0x34,0x00,0x00,0x83,0xa0,
+0x30,0x00,0xb6,0x8f,0x00,0x00,0x05,0xa6,0x2c,0x00,0xb5,0x8f,0x28,0x00,0xb4,0x8f,
+0x24,0x00,0xb3,0x8f,0x20,0x00,0xb2,0x8f,0x1c,0x00,0xb1,0x8f,0x18,0x00,0xb0,0x8f,
+0x01,0x00,0x02,0x24,0x08,0x00,0xe0,0x03,0x38,0x00,0xbd,0x27,0xe0,0xff,0xbd,0x27,
+0x25,0xb0,0x02,0x3c,0x14,0x00,0xb1,0xaf,0x18,0x00,0xbf,0xaf,0x10,0x00,0xb0,0xaf,
+0xbf,0x00,0x42,0x34,0x00,0x00,0x43,0x90,0x21,0x28,0x00,0x00,0x08,0x00,0x06,0x24,
+0x04,0x00,0x63,0x2c,0x12,0x00,0x60,0x14,0x21,0x88,0x80,0x00,0x00,0x60,0x02,0x40,
+0x01,0x00,0x41,0x34,0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,0x02,0x80,0x03,0x3c,
+0x00,0x7b,0x63,0x24,0x04,0x00,0x64,0x8c,0x00,0x00,0x23,0xae,0x04,0x00,0x71,0xac,
+0x00,0x00,0x91,0xac,0x04,0x00,0x24,0xae,0x00,0x60,0x82,0x40,0x18,0x00,0xbf,0x8f,
+0x14,0x00,0xb1,0x8f,0x10,0x00,0xb0,0x8f,0x08,0x00,0xe0,0x03,0x20,0x00,0xbd,0x27,
+0x08,0x00,0x82,0x94,0x02,0x80,0x04,0x3c,0x97,0x45,0x00,0x0c,0x25,0x20,0x44,0x00,
+0x00,0x60,0x10,0x40,0x01,0x00,0x01,0x36,0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,
+0x08,0x00,0x25,0x8e,0x0c,0x00,0x26,0x96,0x14,0x00,0x27,0x96,0xf0,0x06,0x00,0x0c,
+0x09,0x00,0x04,0x24,0x04,0x00,0x23,0x8e,0x00,0x00,0x22,0x8e,0x21,0x20,0x20,0x02,
+0x00,0x00,0x62,0xac,0x04,0x00,0x43,0xac,0x00,0x00,0x31,0xae,0xbd,0x4e,0x00,0x0c,
+0x04,0x00,0x31,0xae,0x00,0x60,0x90,0x40,0x18,0x00,0xbf,0x8f,0x14,0x00,0xb1,0x8f,
+0x10,0x00,0xb0,0x8f,0x08,0x00,0xe0,0x03,0x20,0x00,0xbd,0x27,0x02,0x80,0x02,0x3c,
+0x68,0x15,0x47,0x24,0x8c,0x64,0xe3,0x90,0xff,0xff,0xa5,0x30,0x09,0x00,0xa3,0x10,
+0x21,0x20,0xc0,0x00,0xfc,0x64,0xe2,0x8c,0x00,0x00,0x00,0x00,0x08,0x00,0xc2,0xac,
+0x06,0x65,0xe3,0x94,0x0e,0x00,0x02,0x24,0x14,0x00,0xc2,0xac,0x8b,0x07,0x00,0x08,
+0x0c,0x00,0xc3,0xac,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x00,0x80,0x03,0x3c,
+0x25,0xb0,0x02,0x3c,0xd0,0xff,0xbd,0x27,0x4c,0x1f,0x63,0x24,0x18,0x03,0x42,0x34,
+0x28,0x00,0xbf,0xaf,0x24,0x00,0xb3,0xaf,0x20,0x00,0xb2,0xaf,0x1c,0x00,0xb1,0xaf,
+0x18,0x00,0xb0,0xaf,0x00,0x00,0x43,0xac,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,
+0x00,0x60,0x81,0x40,0x2a,0xb0,0x02,0x3c,0x36,0x00,0x42,0x34,0x00,0x00,0x43,0x90,
+0x02,0x80,0x13,0x3c,0x68,0x15,0x66,0x26,0xc0,0x18,0x03,0x00,0x5c,0x65,0xc5,0x8c,
+0x23,0xb0,0x04,0x3c,0xf0,0x07,0x63,0x30,0xff,0x1f,0x02,0x3c,0x21,0x18,0x64,0x00,
+0xff,0xff,0x42,0x34,0x24,0x20,0x62,0x00,0x23,0x88,0x85,0x00,0x2b,0x38,0x85,0x00,
+0x00,0x04,0x22,0x26,0x00,0x65,0xc3,0x8c,0x0b,0x88,0x47,0x00,0x01,0x04,0x25,0x2e,
+0xfc,0x64,0xc3,0xac,0x60,0x65,0xc4,0xac,0x06,0x65,0xc0,0xa4,0x11,0x00,0xa0,0x14,
+0x05,0x65,0xc0,0xa0,0x00,0xfc,0x83,0x24,0x23,0x10,0x02,0x3c,0x0b,0x18,0x87,0x00,
+0xff,0x03,0x42,0x34,0x2b,0x10,0x43,0x00,0x33,0x00,0x40,0x14,0x00,0x00,0x00,0x00,
+0x23,0x88,0x83,0x00,0x2b,0x10,0x83,0x00,0x5c,0x65,0xc3,0xac,0x03,0x00,0x40,0x10,
+0x01,0x04,0x25,0x2e,0x00,0x04,0x31,0x26,0x01,0x04,0x25,0x2e,0x0e,0x00,0xa0,0x10,
+0x68,0x15,0x70,0x26,0x68,0x15,0x70,0x26,0x60,0x65,0x03,0x8e,0x5c,0x65,0x04,0x8e,
+0x00,0x00,0x00,0x00,0x2b,0x10,0x83,0x00,0x25,0x00,0x40,0x14,0x2b,0x10,0x64,0x00,
+0x51,0x00,0x40,0x14,0x25,0xb0,0x02,0x3c,0x80,0x00,0x03,0x24,0xd0,0x03,0x42,0x34,
+0x00,0x00,0x43,0xac,0x68,0x15,0x70,0x26,0x5c,0x65,0x03,0x96,0x2a,0xb0,0x02,0x3c,
+0x35,0x00,0x42,0x34,0xc2,0x88,0x03,0x00,0x00,0x00,0x51,0xa0,0x8f,0x10,0x00,0x0c,
+0x00,0x00,0x00,0x00,0x06,0x65,0x03,0x96,0x25,0xb0,0x02,0x3c,0xb0,0x03,0x42,0x34,
+0x00,0x00,0x43,0xac,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x01,0x00,0x21,0x38,
+0x00,0x60,0x81,0x40,0xfc,0x4a,0x02,0x8e,0x80,0x00,0x03,0x3c,0x41,0xb0,0x04,0x3c,
+0x25,0x10,0x43,0x00,0x00,0x00,0x82,0xac,0x28,0x00,0xbf,0x8f,0xfc,0x4a,0x02,0xae,
+0x24,0x00,0xb3,0x8f,0x20,0x00,0xb2,0x8f,0x1c,0x00,0xb1,0x8f,0x18,0x00,0xb0,0x8f,
+0x08,0x00,0xe0,0x03,0x30,0x00,0xbd,0x27,0x00,0x08,0x00,0x08,0x00,0xfc,0x63,0x24,
+0xfc,0x64,0x05,0x8e,0x21,0x30,0x80,0x00,0xff,0xff,0x27,0x32,0x09,0x00,0x04,0x24,
+0x10,0x01,0x00,0x0c,0x10,0x00,0xa0,0xaf,0xfc,0x64,0x03,0x8e,0x06,0x65,0x05,0x96,
+0x5c,0x65,0x02,0x8e,0x21,0x18,0x71,0x00,0x21,0x28,0x25,0x02,0x21,0x10,0x51,0x00,
+0x09,0x00,0x04,0x24,0x5c,0x65,0x02,0xae,0xfc,0x64,0x03,0xae,0x4d,0x01,0x00,0x0c,
+0x06,0x65,0x05,0xa6,0x68,0x15,0x70,0x26,0x5c,0x65,0x03,0x96,0x2a,0xb0,0x02,0x3c,
+0x35,0x00,0x42,0x34,0xc2,0x88,0x03,0x00,0x00,0x00,0x51,0xa0,0x8f,0x10,0x00,0x0c,
+0x00,0x00,0x00,0x00,0x06,0x65,0x03,0x96,0x25,0xb0,0x02,0x3c,0xb0,0x03,0x42,0x34,
+0x00,0x00,0x43,0xac,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x01,0x00,0x21,0x38,
+0x00,0x60,0x81,0x40,0xfc,0x4a,0x02,0x8e,0x80,0x00,0x03,0x3c,0x41,0xb0,0x04,0x3c,
+0x25,0x10,0x43,0x00,0x00,0x00,0x82,0xac,0x28,0x00,0xbf,0x8f,0xfc,0x4a,0x02,0xae,
+0x24,0x00,0xb3,0x8f,0x20,0x00,0xb2,0x8f,0x1c,0x00,0xb1,0x8f,0x18,0x00,0xb0,0x8f,
+0x08,0x00,0xe0,0x03,0x30,0x00,0xbd,0x27,0x64,0x65,0x02,0x8e,0xfc,0x64,0x05,0x8e,
+0x21,0x30,0x80,0x00,0x23,0x88,0x44,0x00,0xff,0xff,0x27,0x32,0x09,0x00,0x04,0x24,
+0x10,0x01,0x00,0x0c,0x10,0x00,0xa0,0xaf,0xfc,0x64,0x03,0x8e,0x06,0x65,0x02,0x96,
+0x60,0x65,0x12,0x96,0x21,0x18,0x71,0x00,0x21,0x10,0x22,0x02,0x23,0x10,0x11,0x3c,
+0xfc,0x64,0x03,0xae,0x06,0x65,0x02,0xa6,0x06,0x00,0x40,0x16,0x5c,0x65,0x11,0xae,
+0x09,0x00,0x04,0x24,0x4d,0x01,0x00,0x0c,0x68,0x15,0x70,0x26,0x46,0x08,0x00,0x08,
+0x00,0x00,0x00,0x00,0x4d,0x01,0x00,0x0c,0x09,0x00,0x04,0x24,0xfc,0x64,0x05,0x8e,
+0x09,0x00,0x04,0x24,0x23,0x10,0x06,0x3c,0x21,0x38,0x40,0x02,0x10,0x01,0x00,0x0c,
+0x10,0x00,0xa0,0xaf,0xfc,0x64,0x03,0x8e,0x06,0x65,0x02,0x96,0x21,0x20,0x51,0x02,
+0x21,0x18,0x72,0x00,0x21,0x10,0x42,0x02,0x5c,0x65,0x04,0xae,0x09,0x00,0x04,0x24,
+0xfc,0x64,0x03,0xae,0x75,0x08,0x00,0x08,0x06,0x65,0x02,0xa6,0x02,0x80,0x09,0x3c,
+0x68,0x15,0x28,0x25,0xdc,0x63,0x06,0x8d,0xff,0xff,0x02,0x34,0x3f,0x00,0xc2,0x10,
+0x21,0x38,0x80,0x00,0x2b,0x10,0xc7,0x00,0x30,0x00,0x40,0x10,0x02,0x19,0x06,0x00,
+0x21,0x10,0xc7,0x00,0x23,0x10,0x43,0x00,0x10,0x00,0x46,0x24,0xdc,0x63,0x06,0xad,
+0x68,0x15,0x26,0x25,0x04,0x40,0xc4,0x8c,0xe0,0x63,0x02,0xad,0xff,0xff,0x02,0x34,
+0x2f,0x00,0x82,0x10,0x00,0x00,0x00,0x00,0x2b,0x10,0x87,0x00,0x1f,0x00,0x40,0x10,
+0x02,0x19,0x04,0x00,0x21,0x10,0x87,0x00,0x23,0x10,0x43,0x00,0x10,0x00,0x44,0x24,
+0x04,0x40,0xc4,0xac,0xe0,0x63,0xc2,0xac,0xc0,0x10,0x05,0x00,0x21,0x10,0x45,0x00,
+0x80,0x10,0x02,0x00,0x21,0x10,0x45,0x00,0x68,0x15,0x23,0x25,0x80,0x10,0x02,0x00,
+0x21,0x28,0x43,0x00,0x68,0x51,0xa6,0x8c,0x00,0x21,0x07,0x00,0xff,0xff,0xc2,0x38,
+0x0a,0x30,0x82,0x00,0x2b,0x18,0xc7,0x00,0x07,0x00,0x60,0x10,0x21,0x10,0xc7,0x00,
+0x02,0x19,0x06,0x00,0x23,0x10,0x43,0x00,0x10,0x00,0x46,0x24,0x68,0x51,0xa6,0xac,
+0x08,0x00,0xe0,0x03,0x6c,0x51,0xa2,0xac,0x02,0x19,0x06,0x00,0x23,0x10,0x43,0x00,
+0x68,0x51,0xa2,0xac,0x08,0x00,0xe0,0x03,0x6c,0x51,0xa2,0xac,0x21,0x10,0x87,0x00,
+0x23,0x10,0x43,0x00,0xa5,0x08,0x00,0x08,0x04,0x40,0xc2,0xac,0x21,0x10,0xc7,0x00,
+0x68,0x15,0x26,0x25,0x04,0x40,0xc4,0x8c,0x23,0x10,0x43,0x00,0xdc,0x63,0x02,0xad,
+0xe0,0x63,0x02,0xad,0xff,0xff,0x02,0x34,0xd4,0xff,0x82,0x14,0x2b,0x10,0x87,0x00,
+0x00,0x21,0x07,0x00,0x9e,0x08,0x00,0x08,0x04,0x40,0xc4,0xac,0x00,0x31,0x04,0x00,
+0x91,0x08,0x00,0x08,0xdc,0x63,0x06,0xad,0x63,0x00,0x82,0x24,0x77,0x00,0x42,0x2c,
+0x00,0x00,0x85,0x28,0x04,0x00,0x40,0x10,0x21,0x18,0x00,0x00,0x64,0x00,0x82,0x24,
+0x64,0x00,0x03,0x24,0x0b,0x18,0x45,0x00,0x08,0x00,0xe0,0x03,0x21,0x10,0x60,0x00,
+0x0c,0x00,0x82,0x8c,0x00,0x00,0x00,0x00,0x3f,0x00,0x42,0x30,0x04,0x00,0x42,0x28,
+0x17,0x00,0x40,0x10,0x25,0xb0,0x02,0x3c,0x24,0x08,0x42,0x34,0x00,0x00,0x43,0x8c,
+0x00,0x00,0x00,0x00,0x00,0x02,0x63,0x30,0x16,0x00,0x60,0x14,0x01,0x00,0x02,0x24,
+0x05,0x00,0xa3,0x90,0x00,0x00,0x00,0x00,0x82,0x21,0x03,0x00,0x28,0x00,0x82,0x10,
+0xf5,0xff,0x02,0x24,0x02,0x00,0x82,0x28,0x39,0x00,0x40,0x14,0x02,0x00,0x02,0x24,
+0x2e,0x00,0x82,0x10,0xe9,0xff,0x02,0x24,0x03,0x00,0x02,0x24,0x24,0x00,0x82,0x10,
+0x3e,0x00,0x63,0x30,0x05,0x00,0xc4,0x24,0xd2,0x08,0x00,0x08,0x00,0x00,0x00,0x00,
+0x04,0x00,0xa4,0x90,0x00,0x00,0x00,0x00,0x42,0x20,0x04,0x00,0xd2,0x08,0x00,0x08,
+0x96,0xff,0x84,0x24,0x05,0x00,0xa3,0x90,0x00,0x00,0x00,0x00,0x60,0x00,0x64,0x30,
+0x42,0x21,0x04,0x00,0x0e,0x00,0x82,0x10,0x1f,0x00,0x62,0x30,0x02,0x00,0x82,0x28,
+0x1d,0x00,0x40,0x14,0x02,0x00,0x02,0x24,0x14,0x00,0x82,0x10,0x1f,0x00,0x62,0x30,
+0x03,0x00,0x02,0x24,0xeb,0xff,0x82,0x14,0x1f,0x00,0x62,0x30,0x40,0x10,0x02,0x00,
+0xdd,0xff,0x03,0x24,0x23,0x30,0x62,0x00,0xf6,0x08,0x00,0x08,0x05,0x00,0xc4,0x24,
+0x40,0x10,0x02,0x00,0xf5,0xff,0x03,0x24,0x0e,0x09,0x00,0x08,0x23,0x30,0x62,0x00,
+0x3e,0x00,0x63,0x30,0x23,0x30,0x43,0x00,0xf6,0x08,0x00,0x08,0x05,0x00,0xc4,0x24,
+0xdd,0xff,0x02,0x24,0x16,0x09,0x00,0x08,0x23,0x30,0x43,0x00,0x40,0x10,0x02,0x00,
+0xe9,0xff,0x03,0x24,0x0e,0x09,0x00,0x08,0x23,0x30,0x62,0x00,0x3e,0x00,0x63,0x30,
+0x16,0x09,0x00,0x08,0x23,0x30,0x43,0x00,0xd2,0xff,0x80,0x14,0x1f,0x00,0x62,0x30,
+0x40,0x10,0x02,0x00,0xf8,0xff,0x03,0x24,0x0e,0x09,0x00,0x08,0x23,0x30,0x62,0x00,
+0xcc,0xff,0x80,0x14,0x3e,0x00,0x63,0x30,0xf8,0xff,0x02,0x24,0x16,0x09,0x00,0x08,
+0x23,0x30,0x43,0x00,0xa0,0xff,0xbd,0x27,0x02,0x80,0x02,0x3c,0x4c,0x00,0xb5,0xaf,
+0x5c,0x00,0xbf,0xaf,0x58,0x00,0xbe,0xaf,0x54,0x00,0xb7,0xaf,0x50,0x00,0xb6,0xaf,
+0x48,0x00,0xb4,0xaf,0x44,0x00,0xb3,0xaf,0x40,0x00,0xb2,0xaf,0x3c,0x00,0xb1,0xaf,
+0x38,0x00,0xb0,0xaf,0x68,0x15,0x55,0x24,0x25,0xb0,0x03,0x3c,0x04,0x01,0x62,0x34,
+0x00,0x00,0x43,0x8c,0x44,0x65,0xa7,0x8e,0x00,0x00,0x00,0x00,0x33,0x00,0xe3,0x10,
+0x48,0x65,0xa3,0xae,0x2b,0x10,0x67,0x00,0xa8,0x00,0x40,0x14,0x2b,0x10,0xe3,0x00,
+0xd1,0x00,0x40,0x14,0x02,0x80,0x02,0x3c,0x68,0x15,0x44,0x24,0x18,0x65,0x83,0x94,
+0x02,0x80,0x02,0x3c,0x21,0x88,0x00,0x00,0x19,0x00,0x40,0x1a,0x25,0x98,0x62,0x00,
+0x21,0xb8,0x80,0x00,0x21,0xb0,0x80,0x00,0x01,0x00,0x14,0x24,0x21,0x20,0x00,0x00,
+0x21,0x80,0x93,0x00,0x00,0x00,0x05,0x8e,0x00,0x00,0x00,0x00,0x07,0x00,0xa0,0x10,
+0x01,0x00,0x22,0x26,0x04,0x00,0x02,0x8e,0x00,0xf0,0x03,0x3c,0x00,0x20,0x04,0x3c,
+0x24,0x10,0x43,0x00,0x1e,0x00,0x44,0x10,0x06,0x00,0x22,0x26,0xff,0xff,0x51,0x30,
+0x82,0x16,0x05,0x00,0x01,0x00,0x42,0x30,0x34,0x00,0x54,0x10,0x00,0x00,0x00,0x00,
+0x80,0x20,0x11,0x00,0x2a,0x10,0x92,0x00,0xed,0xff,0x40,0x14,0x00,0x00,0x00,0x00,
+0xbd,0x4e,0x00,0x0c,0x21,0x20,0xc0,0x03,0x02,0x80,0x02,0x3c,0x08,0x04,0x44,0x24,
+0x21,0x28,0x00,0x00,0x21,0x30,0x00,0x00,0x31,0x1c,0x00,0x0c,0x21,0x38,0x00,0x00,
+0x25,0xb0,0x03,0x3c,0x04,0x01,0x62,0x34,0x00,0x00,0x43,0x8c,0x44,0x65,0xa7,0x8e,
+0x00,0x00,0x00,0x00,0xcf,0xff,0xe3,0x14,0x48,0x65,0xa3,0xae,0x25,0xb0,0x03,0x3c,
+0x00,0x01,0x62,0x34,0x00,0x00,0x47,0xac,0x66,0x09,0x00,0x08,0x44,0x65,0xa7,0xae,
+0xb0,0x4c,0xe2,0x8e,0x00,0x00,0x00,0x00,0x01,0x00,0x42,0x24,0xb0,0x4c,0xe2,0xae,
+0x0c,0x00,0x04,0x8e,0x0c,0x00,0x02,0x24,0x3f,0x00,0x83,0x30,0x64,0x00,0x62,0x10,
+0x21,0x28,0xe0,0x02,0x3f,0x00,0x83,0x30,0x0d,0x00,0x02,0x24,0x59,0x00,0x62,0x10,
+0x00,0x00,0x00,0x00,0x3f,0x00,0x83,0x30,0x0e,0x00,0x02,0x24,0x04,0x00,0x62,0x10,
+0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x8e,0x5b,0x09,0x00,0x08,0x06,0x00,0x22,0x26,
+0xbc,0x4c,0xe2,0x8e,0x00,0x00,0x00,0x00,0x01,0x00,0x42,0x24,0xbc,0x4c,0xe2,0xae,
+0x00,0x00,0x05,0x8e,0x5b,0x09,0x00,0x08,0x06,0x00,0x22,0x26,0x00,0x40,0xc2,0x8e,
+0x00,0x00,0x00,0x00,0x02,0x12,0x02,0x00,0x0f,0x00,0x42,0x30,0x05,0x00,0x54,0x10,
+0xc2,0x13,0x05,0x00,0x1e,0x00,0x42,0x30,0x21,0x10,0x51,0x00,0x60,0x09,0x00,0x08,
+0xff,0xff,0x51,0x30,0x02,0x40,0xc2,0x92,0x00,0x00,0x00,0x00,0x1e,0x00,0x40,0x14,
+0x02,0x80,0x03,0x3c,0x04,0x00,0x03,0x8e,0x00,0x00,0x00,0x00,0x02,0x14,0x03,0x00,
+0x0f,0x00,0x42,0x30,0x17,0x00,0x40,0x14,0x02,0x17,0x03,0x00,0x03,0x00,0x44,0x30,
+0x08,0x00,0x80,0x10,0x00,0xc0,0x02,0x3c,0x24,0x10,0x62,0x00,0x11,0x00,0x40,0x14,
+0x03,0x00,0x02,0x24,0x10,0x00,0x82,0x10,0x02,0x80,0x03,0x3c,0x0f,0x00,0x80,0x10,
+0x68,0x15,0x63,0x24,0x80,0x10,0x11,0x00,0x21,0x28,0x53,0x00,0xec,0xff,0xa3,0x8c,
+0x25,0xb0,0x02,0x3c,0xd4,0x02,0x42,0x34,0x21,0x20,0x00,0x02,0x00,0x00,0x43,0xac,
+0xdc,0x08,0x00,0x0c,0x00,0x00,0x00,0x00,0x21,0x20,0x40,0x00,0x8b,0x08,0x00,0x0c,
+0x21,0x28,0x00,0x00,0x02,0x80,0x03,0x3c,0x68,0x15,0x63,0x24,0x02,0x40,0x62,0x90,
+0x00,0x00,0x00,0x00,0x85,0x00,0x54,0x10,0x00,0x00,0x00,0x00,0x02,0x80,0x04,0x3c,
+0x68,0x15,0x84,0x24,0x02,0x40,0x83,0x90,0x02,0x00,0x02,0x24,0x68,0x00,0x62,0x10,
+0x00,0x00,0x00,0x00,0x25,0xb0,0x03,0x3c,0x4c,0x00,0x63,0x34,0x00,0x00,0x62,0x90,
+0x00,0x00,0x00,0x00,0x03,0x00,0x42,0x30,0x08,0x00,0x54,0x10,0x02,0x80,0x04,0x3c,
+0x00,0x00,0x05,0x8e,0x00,0x00,0x00,0x00,0xc2,0x13,0x05,0x00,0x1e,0x00,0x42,0x30,
+0x21,0x10,0x51,0x00,0x60,0x09,0x00,0x08,0xff,0xff,0x51,0x30,0xd0,0x02,0x02,0x24,
+0x68,0x15,0x84,0x24,0xdc,0x63,0x82,0xac,0x00,0x00,0x05,0x8e,0xd3,0x09,0x00,0x08,
+0xc2,0x13,0x05,0x00,0xb8,0x4c,0xa2,0x8c,0x00,0x00,0x00,0x00,0x01,0x00,0x42,0x24,
+0xb8,0x4c,0xa2,0xac,0x0c,0x00,0x04,0x8e,0x86,0x09,0x00,0x08,0x3f,0x00,0x83,0x30,
+0xb4,0x4c,0xe2,0x8e,0x00,0x00,0x00,0x00,0x01,0x00,0x42,0x24,0xb4,0x4c,0xe2,0xae,
+0x0c,0x00,0x04,0x8e,0x82,0x09,0x00,0x08,0x3f,0x00,0x83,0x30,0x4c,0x65,0xa2,0x8e,
+0xff,0xff,0x71,0x30,0x23,0x10,0x47,0x00,0xff,0xff,0x50,0x30,0x21,0x18,0x11,0x02,
+0xff,0xff,0x72,0x30,0xa1,0x4e,0x00,0x0c,0x21,0x20,0x40,0x02,0x76,0x00,0x40,0x10,
+0x21,0xf0,0x40,0x00,0x08,0x00,0x42,0x8c,0x44,0x65,0xa6,0x8e,0x21,0x38,0x00,0x02,
+0x21,0x18,0x52,0x00,0x21,0x28,0x40,0x00,0x08,0x00,0x04,0x24,0x14,0x65,0xa3,0xae,
+0x18,0x65,0xa2,0xae,0x10,0x01,0x00,0x0c,0x10,0x00,0xa0,0xaf,0x4d,0x01,0x00,0x0c,
+0x08,0x00,0x04,0x24,0x18,0x65,0xa5,0x8e,0x25,0xb0,0x03,0x3c,0x24,0x10,0x02,0x3c,
+0x21,0x28,0xb0,0x00,0x00,0x01,0x70,0x34,0x00,0x00,0x02,0xae,0x21,0x38,0x20,0x02,
+0x08,0x00,0x04,0x24,0x24,0x10,0x06,0x3c,0x44,0x65,0xa2,0xae,0x10,0x01,0x00,0x0c,
+0x10,0x00,0xa0,0xaf,0x48,0x65,0xa3,0x8e,0x08,0x00,0x04,0x24,0x4d,0x01,0x00,0x0c,
+0x44,0x65,0xa3,0xae,0x44,0x65,0xa2,0x8e,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0xae,
+0x46,0x09,0x00,0x08,0x02,0x80,0x02,0x3c,0x23,0x10,0x67,0x00,0xff,0xff,0x52,0x30,
+0xa1,0x4e,0x00,0x0c,0x21,0x20,0x40,0x02,0x56,0x00,0x40,0x10,0x21,0xf0,0x40,0x00,
+0x08,0x00,0x42,0x8c,0x44,0x65,0xa6,0x8e,0x08,0x00,0x04,0x24,0x21,0x18,0x52,0x00,
+0x21,0x28,0x40,0x00,0x21,0x38,0x40,0x02,0x14,0x65,0xa3,0xae,0x18,0x65,0xa2,0xae,
+0x10,0x01,0x00,0x0c,0x10,0x00,0xa0,0xaf,0x48,0x65,0xa3,0x8e,0x08,0x00,0x04,0x24,
+0x4d,0x01,0x00,0x0c,0x44,0x65,0xa3,0xae,0x44,0x65,0xa3,0x8e,0x25,0xb0,0x04,0x3c,
+0x00,0x01,0x82,0x34,0x00,0x00,0x43,0xac,0x46,0x09,0x00,0x08,0x02,0x80,0x02,0x3c,
+0x04,0x00,0x03,0x8e,0x00,0x00,0x00,0x00,0x02,0x14,0x03,0x00,0x0f,0x00,0x42,0x30,
+0x08,0x00,0x42,0x28,0x93,0xff,0x40,0x10,0x02,0x17,0x03,0x00,0x03,0x00,0x42,0x30,
+0x90,0xff,0x40,0x14,0x80,0x10,0x11,0x00,0x21,0x28,0x53,0x00,0xec,0xff,0xa3,0x8c,
+0x25,0xb0,0x02,0x3c,0xd4,0x02,0x42,0x34,0x21,0x20,0x00,0x02,0x00,0x00,0x43,0xac,
+0xdc,0x08,0x00,0x0c,0x00,0x00,0x00,0x00,0x21,0x20,0x40,0x00,0x8b,0x08,0x00,0x0c,
+0x21,0x28,0x00,0x00,0xca,0x09,0x00,0x08,0x25,0xb0,0x03,0x3c,0x04,0x00,0x03,0x8e,
+0x00,0x00,0x00,0x00,0x02,0x14,0x03,0x00,0x0f,0x00,0x42,0x30,0x08,0x00,0x42,0x28,
+0x06,0x00,0x40,0x10,0x00,0xc0,0x02,0x3c,0x02,0x17,0x03,0x00,0x03,0x00,0x42,0x30,
+0x0c,0x00,0x40,0x10,0x80,0x10,0x11,0x00,0x00,0xc0,0x02,0x3c,0x24,0x10,0x62,0x00,
+0x6f,0xff,0x40,0x14,0x02,0x80,0x04,0x3c,0x02,0x17,0x03,0x00,0x03,0x00,0x42,0x30,
+0x03,0x00,0x03,0x24,0x6b,0xff,0x43,0x10,0x68,0x15,0x84,0x24,0x67,0xff,0x40,0x10,
+0x80,0x10,0x11,0x00,0x21,0x28,0x53,0x00,0xec,0xff,0xa3,0x8c,0x25,0xb0,0x02,0x3c,
+0xd4,0x02,0x42,0x34,0x21,0x20,0x00,0x02,0x00,0x00,0x43,0xac,0xdc,0x08,0x00,0x0c,
+0x00,0x00,0x00,0x00,0x21,0x20,0x40,0x00,0x8b,0x08,0x00,0x0c,0x21,0x28,0x00,0x00,
+0xc4,0x09,0x00,0x08,0x02,0x80,0x04,0x3c,0x25,0xb0,0x04,0x3c,0x44,0x44,0x02,0x3c,
+0xbc,0x02,0x83,0x34,0x44,0x44,0x42,0x34,0x00,0x00,0x62,0xac,0x67,0x09,0x00,0x08,
+0x02,0x80,0x02,0x3c,0x48,0x65,0xa5,0x8e,0x25,0xb0,0x04,0x3c,0x66,0x66,0x02,0x3c,
+0x00,0x01,0x83,0x34,0x66,0x66,0x42,0x34,0xbc,0x02,0x84,0x34,0x00,0x00,0x65,0xac,
+0x00,0x00,0x82,0xac,0x66,0x09,0x00,0x08,0x44,0x65,0xa5,0xae,0x00,0x60,0x02,0x40,
+0x01,0x00,0x41,0x34,0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,0x02,0x80,0x03,0x3c,
+0xd8,0x8c,0x64,0xac,0x00,0x60,0x82,0x40,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,
+0x02,0x80,0x02,0x3c,0xd8,0x8c,0x45,0x8c,0x00,0x80,0x03,0x3c,0x25,0xb0,0x02,0x3c,
+0x18,0x03,0x42,0x34,0x10,0x2a,0x63,0x24,0x00,0x00,0x43,0xac,0x04,0x00,0x02,0x24,
+0x1e,0x00,0xa2,0x10,0x05,0x00,0xa2,0x2c,0x10,0x00,0x40,0x10,0x05,0x00,0x02,0x24,
+0x03,0x00,0x02,0x24,0x08,0x00,0xa2,0x10,0x00,0x19,0x04,0x00,0x80,0x10,0x04,0x00,
+0x21,0x10,0x44,0x00,0xc0,0x10,0x02,0x00,0x23,0x10,0x44,0x00,0x00,0x11,0x02,0x00,
+0x21,0x10,0x44,0x00,0x40,0x19,0x02,0x00,0xff,0xff,0x63,0x24,0xfe,0xff,0x60,0x14,
+0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0xf3,0xff,0xa2,0x10,
+0x06,0x00,0x02,0x24,0xf2,0xff,0xa2,0x14,0x80,0x10,0x04,0x00,0x40,0x11,0x04,0x00,
+0x23,0x10,0x44,0x00,0x80,0x10,0x02,0x00,0x21,0x10,0x44,0x00,0x00,0x19,0x02,0x00,
+0x23,0x18,0x62,0x00,0x9a,0x0a,0x00,0x08,0x00,0x19,0x03,0x00,0x80,0x10,0x04,0x00,
+0x21,0x10,0x44,0x00,0xc0,0x10,0x02,0x00,0x23,0x10,0x44,0x00,0x00,0x11,0x02,0x00,
+0x21,0x10,0x44,0x00,0x9a,0x0a,0x00,0x08,0x00,0x19,0x02,0x00,0x02,0x80,0x02,0x3c,
+0xd8,0x8c,0x45,0x8c,0x00,0x80,0x03,0x3c,0x25,0xb0,0x02,0x3c,0x18,0x03,0x42,0x34,
+0xcc,0x2a,0x63,0x24,0x00,0x00,0x43,0xac,0x05,0x00,0x02,0x24,0x10,0x00,0xa2,0x10,
+0x06,0x00,0xa2,0x2c,0x09,0x00,0x40,0x14,0x04,0x00,0x02,0x24,0x06,0x00,0x02,0x24,
+0x0f,0x00,0xa2,0x10,0x00,0x11,0x04,0x00,0xff,0xff,0x84,0x24,0xfe,0xff,0x80,0x14,
+0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0xfa,0xff,0xa2,0x14,
+0x80,0x10,0x04,0x00,0x21,0x10,0x44,0x00,0xc2,0x0a,0x00,0x08,0x40,0x20,0x02,0x00,
+0x80,0x10,0x04,0x00,0x21,0x10,0x44,0x00,0xc2,0x0a,0x00,0x08,0x80,0x20,0x02,0x00,
+0x23,0x10,0x44,0x00,0xc2,0x0a,0x00,0x08,0x40,0x20,0x02,0x00,0xff,0xff,0x85,0x30,
+0x21,0x30,0x00,0x00,0x25,0xb0,0x03,0x3c,0x2a,0xb0,0x04,0x3c,0xb4,0x00,0x63,0x34,
+0x01,0x00,0xa2,0x24,0x31,0x00,0x84,0x34,0x00,0x00,0x65,0xa0,0x00,0x00,0x85,0xa0,
+0xff,0xff,0x45,0x30,0x12,0x00,0xa0,0x10,0x01,0x00,0x03,0x24,0x28,0xb0,0x07,0x3c,
+0xe8,0x0a,0x00,0x08,0xff,0xff,0x08,0x24,0x00,0x00,0x83,0xa0,0x01,0x00,0x63,0x24,
+0xff,0xff,0x63,0x30,0x2b,0x10,0xa3,0x00,0x09,0x00,0x40,0x14,0x08,0x00,0xc6,0x24,
+0xf9,0xff,0x65,0x14,0x21,0x20,0xc7,0x00,0x01,0x00,0x63,0x24,0xff,0xff,0x63,0x30,
+0x2b,0x10,0xa3,0x00,0x00,0x00,0x88,0xa0,0xf9,0xff,0x40,0x10,0x08,0x00,0xc6,0x24,
+0x00,0x01,0xa2,0x2c,0x13,0x00,0x40,0x10,0x21,0x18,0xa0,0x00,0xff,0x00,0x08,0x24,
+0x28,0xb0,0x07,0x3c,0xfc,0x0a,0x00,0x08,0xff,0xff,0x09,0x24,0xff,0xff,0x43,0x30,
+0x00,0x00,0xa2,0xa0,0x00,0x01,0x62,0x2c,0x0a,0x00,0x40,0x10,0x08,0x00,0xc6,0x24,
+0x01,0x00,0x62,0x24,0xf9,0xff,0x68,0x14,0x21,0x28,0xc7,0x00,0x00,0x01,0x02,0x24,
+0xff,0xff,0x43,0x30,0x00,0x01,0x62,0x2c,0x00,0x00,0xa9,0xa0,0xf8,0xff,0x40,0x14,
+0x08,0x00,0xc6,0x24,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0xd8,0xff,0xbd,0x27,
+0x24,0x00,0xbf,0xaf,0x20,0x00,0xb4,0xaf,0x1c,0x00,0xb3,0xaf,0x18,0x00,0xb2,0xaf,
+0x14,0x00,0xb1,0xaf,0x10,0x00,0xb0,0xaf,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,
+0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,0x25,0xb0,0x10,0x3c,0x42,0x00,0x14,0x36,
+0xff,0xff,0x02,0x24,0x00,0x00,0x82,0xa2,0xd8,0x00,0x05,0x36,0x40,0x00,0x11,0x36,
+0xa8,0x00,0x13,0x36,0xa0,0x00,0x12,0x36,0x00,0x10,0x03,0x24,0xa4,0x00,0x10,0x36,
+0x00,0x80,0x02,0x3c,0x00,0x00,0x23,0xa6,0x00,0x00,0xa0,0xa0,0x00,0x00,0x40,0xae,
+0x00,0x00,0x00,0xae,0x00,0x00,0x62,0xae,0x00,0x00,0xa3,0x90,0x80,0xff,0x02,0x24,
+0xfd,0x00,0x04,0x24,0x25,0x18,0x62,0x00,0xfc,0x17,0x02,0x24,0x00,0x00,0xa3,0xa0,
+0x00,0x00,0x22,0xa6,0xd3,0x0a,0x00,0x0c,0x00,0x00,0x00,0x00,0x02,0x80,0x02,0x3c,
+0x68,0x15,0x42,0x24,0x68,0x4b,0x45,0x8c,0x60,0x4b,0x43,0x8c,0x64,0x4b,0x44,0x8c,
+0xfc,0x37,0x02,0x24,0x00,0x00,0x43,0xae,0x00,0x00,0x04,0xae,0x00,0x00,0x65,0xae,
+0x00,0x00,0x22,0xa6,0x00,0x00,0x80,0xa2,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,
+0x00,0x60,0x81,0x40,0x24,0x00,0xbf,0x8f,0x20,0x00,0xb4,0x8f,0x1c,0x00,0xb3,0x8f,
+0x18,0x00,0xb2,0x8f,0x14,0x00,0xb1,0x8f,0x10,0x00,0xb0,0x8f,0x08,0x00,0xe0,0x03,
+0x28,0x00,0xbd,0x27,0xd0,0xff,0xbd,0x27,0x2c,0x00,0xbf,0xaf,0x28,0x00,0xb6,0xaf,
+0x24,0x00,0xb5,0xaf,0x20,0x00,0xb4,0xaf,0x1c,0x00,0xb3,0xaf,0x18,0x00,0xb2,0xaf,
+0x14,0x00,0xb1,0xaf,0x10,0x00,0xb0,0xaf,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,
+0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,0x25,0xb0,0x10,0x3c,0x40,0x00,0x05,0x36,
+0x00,0x00,0xa2,0x94,0x24,0xfa,0x03,0x24,0xa8,0x00,0x13,0x36,0x24,0x10,0x43,0x00,
+0x00,0x00,0xa2,0xa4,0xa0,0x00,0x12,0x36,0xa4,0x00,0x10,0x36,0x00,0x00,0x55,0x8e,
+0x00,0x00,0x16,0x8e,0x00,0x00,0x71,0x8e,0x00,0x80,0x14,0x3c,0xfc,0x37,0x02,0x24,
+0x00,0x00,0x40,0xae,0xfd,0x00,0x04,0x24,0x00,0x00,0x00,0xae,0x21,0x88,0x34,0x02,
+0x00,0x00,0x74,0xae,0x00,0x00,0xa2,0xa4,0xd3,0x0a,0x00,0x0c,0x00,0x00,0x00,0x00,
+0x00,0x00,0x55,0xae,0x00,0x00,0x16,0xae,0x00,0x00,0x71,0xae,0x00,0x60,0x01,0x40,
+0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,0x2c,0x00,0xbf,0x8f,0x28,0x00,0xb6,0x8f,
+0x24,0x00,0xb5,0x8f,0x20,0x00,0xb4,0x8f,0x1c,0x00,0xb3,0x8f,0x18,0x00,0xb2,0x8f,
+0x14,0x00,0xb1,0x8f,0x10,0x00,0xb0,0x8f,0x08,0x00,0xe0,0x03,0x30,0x00,0xbd,0x27,
+0xd0,0xff,0xbd,0x27,0x2c,0x00,0xbf,0xaf,0x28,0x00,0xb6,0xaf,0x24,0x00,0xb5,0xaf,
+0x20,0x00,0xb4,0xaf,0x1c,0x00,0xb3,0xaf,0x18,0x00,0xb2,0xaf,0x14,0x00,0xb1,0xaf,
+0x10,0x00,0xb0,0xaf,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x01,0x00,0x21,0x38,
+0x00,0x60,0x81,0x40,0x25,0xb0,0x10,0x3c,0x40,0x00,0x05,0x36,0x00,0x00,0xa2,0x94,
+0xaf,0xff,0x03,0x24,0xa8,0x00,0x13,0x36,0x24,0x10,0x43,0x00,0x00,0x00,0xa2,0xa4,
+0xa0,0x00,0x12,0x36,0xa4,0x00,0x10,0x36,0x00,0x00,0x55,0x8e,0x00,0x00,0x16,0x8e,
+0x00,0x00,0x71,0x8e,0x00,0x80,0x14,0x3c,0xfc,0x37,0x02,0x24,0x00,0x00,0x40,0xae,
+0xfd,0x00,0x04,0x24,0x00,0x00,0x00,0xae,0x21,0x88,0x34,0x02,0x00,0x00,0x74,0xae,
+0x00,0x00,0xa2,0xa4,0xd3,0x0a,0x00,0x0c,0x00,0x00,0x00,0x00,0x00,0x00,0x55,0xae,
+0x00,0x00,0x16,0xae,0x00,0x00,0x71,0xae,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,
+0x00,0x60,0x81,0x40,0x2c,0x00,0xbf,0x8f,0x28,0x00,0xb6,0x8f,0x24,0x00,0xb5,0x8f,
+0x20,0x00,0xb4,0x8f,0x1c,0x00,0xb3,0x8f,0x18,0x00,0xb2,0x8f,0x14,0x00,0xb1,0x8f,
+0x10,0x00,0xb0,0x8f,0x08,0x00,0xe0,0x03,0x30,0x00,0xbd,0x27,0x00,0x60,0x01,0x40,
+0x01,0x00,0x21,0x34,0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,0x25,0xb0,0x04,0x3c,
+0x40,0x00,0x84,0x34,0x00,0x00,0x82,0x94,0xd8,0xfd,0x03,0x24,0x24,0x10,0x43,0x00,
+0xfc,0x37,0x03,0x24,0x00,0x00,0x82,0xa4,0x00,0x00,0x83,0xa4,0x00,0x60,0x01,0x40,
+0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,
+0x00,0x00,0x82,0x8c,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0xff,0xff,0xc6,0x30,
+0x10,0x00,0x02,0x24,0x0c,0x00,0xc2,0x10,0x11,0x00,0xc3,0x28,0x06,0x00,0x60,0x10,
+0x20,0x00,0x02,0x24,0x08,0x00,0x02,0x24,0x0d,0x00,0xc2,0x10,0x00,0x00,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x06,0x00,0xc2,0x10,0x00,0x00,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x85,0xa4,0x08,0x00,0xe0,0x03,
+0x00,0x00,0x00,0x00,0x00,0x00,0x85,0xac,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,
+0x00,0x00,0x85,0xa0,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,
+0x21,0x10,0x00,0x00,0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,0x25,0xb0,0x02,0x3c,
+0x0a,0x00,0x42,0x34,0x00,0x00,0x43,0x90,0xff,0xff,0xa5,0x24,0x00,0x2c,0x05,0x00,
+0xfd,0x00,0x63,0x30,0x03,0x2c,0x05,0x00,0xff,0xff,0x87,0x30,0x00,0x00,0x43,0xa0,
+0x1a,0x00,0xa0,0x04,0x00,0x00,0x00,0x00,0x21,0x30,0x40,0x00,0x07,0x10,0xa7,0x00,
+0x01,0x00,0x42,0x30,0xfd,0x00,0x64,0x30,0x00,0x00,0x42,0x38,0x02,0x00,0x63,0x34,
+0x0a,0x18,0x82,0x00,0x00,0x00,0xc3,0xa0,0x04,0x00,0x63,0x34,0x00,0x00,0xc3,0xa0,
+0x09,0x00,0x02,0x24,0xff,0xff,0x42,0x24,0xff,0xff,0x41,0x04,0xff,0xff,0x42,0x24,
+0xfb,0x00,0x63,0x30,0x00,0x00,0xc3,0xa0,0x04,0x00,0x02,0x24,0xff,0xff,0x42,0x24,
+0xff,0xff,0x41,0x04,0xff,0xff,0x42,0x24,0xff,0xff,0xa2,0x24,0x00,0x2c,0x02,0x00,
+0x03,0x2c,0x05,0x00,0xea,0xff,0xa1,0x04,0x07,0x10,0xa7,0x00,0x08,0x00,0xe0,0x03,
+0x00,0x00,0x00,0x00,0x25,0xb0,0x02,0x3c,0x0a,0x00,0x42,0x34,0x00,0x00,0x43,0x90,
+0xff,0xff,0x84,0x24,0x00,0x24,0x04,0x00,0x03,0x24,0x04,0x00,0xff,0x00,0x65,0x30,
+0x1d,0x00,0x80,0x04,0x21,0x38,0x00,0x00,0x21,0x30,0x40,0x00,0x01,0x00,0x08,0x24,
+0x04,0x00,0xa5,0x34,0x00,0x00,0xc5,0xa0,0x00,0x00,0xc2,0x90,0x00,0x00,0x00,0x00,
+0xff,0x00,0x45,0x30,0x01,0x00,0xa3,0x30,0x05,0x00,0x60,0x10,0x04,0x00,0x02,0x24,
+0x04,0x10,0x88,0x00,0x25,0x10,0x47,0x00,0xff,0xff,0x47,0x30,0x04,0x00,0x02,0x24,
+0xff,0xff,0x42,0x24,0xff,0xff,0x41,0x04,0xff,0xff,0x42,0x24,0xfb,0x00,0xa5,0x30,
+0x00,0x00,0xc5,0xa0,0x09,0x00,0x02,0x24,0xff,0xff,0x42,0x24,0xff,0xff,0x41,0x04,
+0xff,0xff,0x42,0x24,0xff,0xff,0x82,0x24,0x00,0x24,0x02,0x00,0x03,0x24,0x04,0x00,
+0xe7,0xff,0x81,0x04,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,0x21,0x10,0xe0,0x00,
+0xe0,0xff,0xbd,0x27,0x10,0x00,0xb0,0xaf,0x25,0xb0,0x10,0x3c,0x0a,0x00,0x10,0x36,
+0x18,0x00,0xbf,0xaf,0x14,0x00,0xb1,0xaf,0x00,0x00,0x02,0x92,0xff,0xff,0x91,0x30,
+0x03,0x00,0x05,0x24,0xc0,0x00,0x42,0x30,0x80,0x00,0x43,0x34,0x00,0x00,0x03,0xa2,
+0x04,0x00,0x63,0x34,0x00,0x00,0x03,0xa2,0xfb,0x00,0x63,0x30,0x00,0x00,0x03,0xa2,
+0x08,0x00,0x63,0x34,0x00,0x00,0x03,0xa2,0x04,0x00,0x63,0x34,0x00,0x00,0x03,0xa2,
+0xfb,0x00,0x63,0x30,0x00,0x00,0x03,0xa2,0xd7,0x0b,0x00,0x0c,0x06,0x00,0x04,0x24,
+0x42,0x20,0x11,0x00,0xd7,0x0b,0x00,0x0c,0x06,0x00,0x05,0x24,0xfd,0x0b,0x00,0x0c,
+0x10,0x00,0x04,0x24,0x00,0x00,0x03,0x92,0x18,0x00,0xbf,0x8f,0x14,0x00,0xb1,0x8f,
+0xc0,0x00,0x63,0x30,0x00,0x00,0x03,0xa2,0x10,0x00,0xb0,0x8f,0x08,0x00,0xe0,0x03,
+0x20,0x00,0xbd,0x27,0xe0,0xff,0xbd,0x27,0x14,0x00,0xb1,0xaf,0xff,0xff,0xb1,0x30,
+0x18,0x00,0xb2,0xaf,0x10,0x00,0xb0,0xaf,0x1c,0x00,0xbf,0xaf,0x21,0x90,0xc0,0x00,
+0x0a,0x00,0x20,0x12,0xff,0xff,0x90,0x30,0x24,0x0c,0x00,0x0c,0x21,0x20,0x00,0x02,
+0xfe,0xff,0x23,0x26,0x02,0x00,0x04,0x26,0x00,0x00,0x42,0xa6,0xff,0xff,0x71,0x30,
+0xff,0xff,0x90,0x30,0xf8,0xff,0x20,0x16,0x02,0x00,0x52,0x26,0x1c,0x00,0xbf,0x8f,
+0x18,0x00,0xb2,0x8f,0x14,0x00,0xb1,0x8f,0x10,0x00,0xb0,0x8f,0x08,0x00,0xe0,0x03,
+0x20,0x00,0xbd,0x27,0x25,0xb0,0x03,0x3c,0x0a,0x00,0x68,0x34,0x00,0x00,0x02,0x91,
+0xff,0xff,0xa5,0x30,0xff,0x00,0x84,0x30,0x1f,0x00,0xa0,0x10,0xff,0x00,0x47,0x30,
+0x21,0x48,0x00,0x01,0x0c,0x00,0x6c,0x34,0x0b,0x00,0x6b,0x34,0xc0,0xff,0x0a,0x24,
+0x21,0x68,0x00,0x01,0x25,0x10,0xea,0x00,0xff,0x00,0x47,0x30,0x00,0x00,0x64,0xa1,
+0x00,0x00,0x27,0xa1,0x00,0x00,0x22,0x91,0x00,0x00,0x00,0x00,0xff,0x00,0x47,0x30,
+0xc0,0x00,0xe3,0x30,0x08,0x00,0x60,0x10,0x00,0x00,0x00,0x00,0x21,0x40,0xa0,0x01,
+0x00,0x00,0x02,0x91,0x00,0x00,0x00,0x00,0xff,0x00,0x47,0x30,0xc0,0x00,0xe3,0x30,
+0xfb,0xff,0x60,0x14,0x00,0x00,0x00,0x00,0x00,0x00,0x82,0x8d,0xfc,0xff,0xa3,0x24,
+0x04,0x00,0x84,0x24,0xff,0xff,0x65,0x30,0x00,0x00,0xc2,0xac,0xff,0x00,0x84,0x30,
+0xe8,0xff,0xa0,0x14,0x04,0x00,0xc6,0x24,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,
+0xff,0x00,0x84,0x30,0x21,0x68,0xe0,0x00,0xff,0xff,0xa5,0x30,0xc0,0x50,0x04,0x00,
+0x00,0x60,0x0c,0x40,0x01,0x00,0x81,0x35,0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,
+0x00,0x00,0xc2,0x90,0x01,0x00,0xc3,0x90,0x25,0xb0,0x07,0x3c,0x00,0x14,0x02,0x00,
+0x25,0x28,0xa2,0x00,0x00,0x1e,0x03,0x00,0x01,0x80,0x08,0x3c,0x25,0x20,0xa3,0x00,
+0x40,0x02,0xe9,0x34,0x25,0x18,0x48,0x01,0x44,0x02,0xe7,0x34,0x00,0x00,0xe4,0xac,
+0x00,0x00,0x23,0xad,0x03,0x00,0xc2,0x90,0x02,0x00,0xc4,0x90,0x04,0x00,0xc3,0x90,
+0x05,0x00,0xc5,0x90,0x00,0x12,0x02,0x00,0x25,0x20,0x82,0x00,0x00,0x1c,0x03,0x00,
+0x01,0x00,0x4a,0x25,0x25,0x20,0x83,0x00,0x00,0x2e,0x05,0x00,0x25,0x40,0x48,0x01,
+0x25,0x20,0x85,0x00,0x00,0x00,0xe4,0xac,0x01,0x00,0x4a,0x25,0x00,0x00,0x28,0xad,
+0x01,0x80,0x0b,0x3c,0x21,0x40,0x00,0x00,0x21,0x10,0xa8,0x01,0x01,0x00,0x43,0x90,
+0x00,0x00,0x45,0x90,0x02,0x00,0x44,0x90,0x03,0x00,0x46,0x90,0x00,0x1a,0x03,0x00,
+0x25,0x28,0xa3,0x00,0x00,0x24,0x04,0x00,0x25,0x28,0xa4,0x00,0x00,0x36,0x06,0x00,
+0x04,0x00,0x08,0x25,0x25,0x10,0x4b,0x01,0x25,0x20,0xa6,0x00,0x10,0x00,0x03,0x2d,
+0x00,0x00,0xe4,0xac,0x01,0x00,0x4a,0x25,0x00,0x00,0x22,0xad,0xee,0xff,0x60,0x14,
+0x00,0x00,0x00,0x00,0x00,0x60,0x8c,0x40,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,
+0xff,0xff,0x84,0x30,0x42,0xb0,0x08,0x3c,0x80,0x10,0x04,0x00,0x21,0x10,0x48,0x00,
+0x04,0x00,0x46,0xac,0x00,0x00,0x07,0x91,0x40,0x18,0x04,0x00,0x03,0x00,0x06,0x24,
+0xff,0x00,0xe7,0x30,0x04,0x30,0x66,0x00,0x01,0x00,0x02,0x24,0x04,0x10,0x62,0x00,
+0x25,0x30,0xc7,0x00,0xff,0xff,0xa5,0x30,0x25,0x10,0x47,0x00,0x02,0x00,0xa0,0x14,
+0xff,0x00,0xc7,0x30,0xff,0x00,0x47,0x30,0x42,0xb0,0x02,0x3c,0x00,0x00,0x47,0xa0,
+0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x42,0xb0,0x02,0x3c,0x03,0x00,0x47,0x34,
+0x00,0x00,0xe3,0x90,0xff,0x00,0x84,0x30,0x04,0x00,0x84,0x24,0xff,0x00,0x65,0x30,
+0x01,0x00,0x02,0x24,0x04,0x30,0x82,0x00,0x07,0x18,0x85,0x00,0x25,0xb0,0x02,0x3c,
+0xe8,0x03,0x42,0x34,0x01,0x00,0x63,0x30,0x21,0x20,0xc0,0x00,0x00,0x00,0x45,0xa0,
+0x02,0x00,0x60,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0xe6,0xa0,0x08,0x00,0xe0,0x03,
+0x24,0x10,0x85,0x00,0x00,0x60,0x03,0x40,0x01,0x00,0x61,0x34,0x01,0x00,0x21,0x38,
+0x00,0x60,0x81,0x40,0x02,0x80,0x02,0x3c,0xdc,0x8c,0x42,0x24,0x04,0x00,0x45,0x8c,
+0x00,0x00,0x82,0xac,0x04,0x00,0x44,0xac,0x00,0x00,0xa4,0xac,0x04,0x00,0x85,0xac,
+0x00,0x60,0x83,0x40,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x14,0x00,0x83,0x90,
+0x01,0x00,0x02,0x24,0x08,0x00,0x86,0xac,0x18,0x00,0x85,0xac,0x00,0x00,0x84,0xac,
+0x03,0x00,0x62,0x10,0x04,0x00,0x84,0xac,0xed,0x0c,0x00,0x08,0x0c,0x00,0x80,0xac,
+0x0c,0x00,0x82,0x8c,0xed,0x0c,0x00,0x08,0x10,0x00,0x82,0xac,0x00,0x60,0x03,0x40,
+0x01,0x00,0x61,0x34,0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,0x04,0x00,0x85,0x8c,
+0x00,0x00,0x82,0x8c,0x00,0x00,0x00,0x00,0x00,0x00,0xa2,0xac,0x04,0x00,0x45,0xac,
+0x00,0x00,0x84,0xac,0x04,0x00,0x84,0xac,0x00,0x60,0x83,0x40,0x08,0x00,0xe0,0x03,
+0x00,0x00,0x00,0x00,0xd0,0xff,0xbd,0x27,0x28,0x00,0xb6,0xaf,0x24,0x00,0xb5,0xaf,
+0x20,0x00,0xb4,0xaf,0x14,0x00,0xb1,0xaf,0x2c,0x00,0xbf,0xaf,0x1c,0x00,0xb3,0xaf,
+0x18,0x00,0xb2,0xaf,0x10,0x00,0xb0,0xaf,0x00,0x80,0x16,0x3c,0x02,0x80,0x14,0x3c,
+0x02,0x80,0x11,0x3c,0x02,0x80,0x15,0x3c,0xc4,0x7d,0x24,0x8e,0x25,0xb0,0x02,0x3c,
+0x54,0x34,0xc3,0x26,0x18,0x03,0x42,0x34,0x00,0x00,0x43,0xac,0xdc,0x8c,0x90,0x8e,
+0x18,0x00,0x80,0x10,0xdc,0x8c,0x82,0x26,0x15,0x00,0x02,0x12,0x00,0x00,0x00,0x00,
+0x21,0x98,0x40,0x00,0x01,0x00,0x12,0x24,0x14,0x00,0x02,0x92,0x00,0x00,0x00,0x00,
+0x1d,0x00,0x52,0x10,0x00,0x00,0x00,0x00,0x09,0x00,0x40,0x14,0x00,0x00,0x00,0x00,
+0x0c,0x00,0x03,0x8e,0xc4,0x7d,0x22,0x8e,0x00,0x00,0x00,0x00,0x23,0x20,0x62,0x00,
+0x2b,0x10,0x43,0x00,0x0e,0x00,0x40,0x10,0x00,0x00,0x00,0x00,0x0c,0x00,0x04,0xae,
+0x00,0x00,0x10,0x8e,0x00,0x00,0x00,0x00,0xef,0xff,0x13,0x16,0x00,0x00,0x00,0x00,
+0xc4,0x7d,0x20,0xae,0x08,0x0c,0xa4,0x26,0x21,0x28,0x00,0x00,0x21,0x30,0x00,0x00,
+0x31,0x1c,0x00,0x0c,0x21,0x38,0x00,0x00,0x22,0x0d,0x00,0x08,0x00,0x00,0x00,0x00,
+0x08,0x00,0x02,0x8e,0x18,0x00,0x04,0x8e,0x09,0xf8,0x40,0x00,0x00,0x00,0x00,0x00,
+0x3c,0x0d,0x00,0x08,0x0c,0x00,0x02,0xae,0x0c,0x00,0x03,0x8e,0xc4,0x7d,0x22,0x8e,
+0x00,0x00,0x00,0x00,0x23,0x20,0x62,0x00,0x2b,0x10,0x43,0x00,0xe7,0xff,0x40,0x14,
+0x00,0x00,0x00,0x00,0x08,0x00,0x02,0x8e,0x18,0x00,0x04,0x8e,0x09,0xf8,0x40,0x00,
+0x00,0x00,0x00,0x00,0x10,0x00,0x03,0x8e,0x3c,0x0d,0x00,0x08,0x0c,0x00,0x03,0xae,
+0xff,0x00,0xa5,0x30,0x25,0xb0,0x02,0x3c,0x21,0x28,0xa2,0x00,0xff,0x00,0x84,0x30,
+0x60,0x01,0xa4,0xa0,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0xff,0x00,0x84,0x30,
+0x01,0x00,0x03,0x24,0x10,0x00,0x02,0x3c,0x04,0x18,0x83,0x00,0xf0,0x70,0x42,0x34,
+0x15,0x00,0x84,0x2c,0x06,0x00,0x80,0x10,0x24,0x28,0x62,0x00,0x0f,0x00,0x63,0x30,
+0x04,0x00,0xa0,0x14,0x01,0x00,0x02,0x24,0x02,0x00,0x60,0x14,0x02,0x00,0x02,0x24,
+0x21,0x10,0x00,0x00,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0xff,0x00,0xa5,0x30,
+0x04,0x00,0xa2,0x2c,0x14,0x00,0x40,0x10,0xff,0x00,0x84,0x30,0x02,0x80,0x03,0x3c,
+0x8e,0x7d,0x62,0x90,0x00,0x00,0x00,0x00,0xef,0xff,0x42,0x24,0xff,0x00,0x42,0x30,
+0x02,0x00,0x42,0x2c,0x0e,0x00,0x40,0x10,0x02,0x00,0x03,0x24,0x24,0x00,0x83,0x10,
+0x0f,0x10,0x02,0x3c,0x03,0x00,0x82,0x28,0x14,0x00,0x40,0x10,0x03,0x00,0x02,0x24,
+0x01,0x00,0x02,0x24,0x2f,0x00,0x82,0x10,0x00,0x00,0x00,0x00,0xff,0x1f,0x02,0x3c,
+0x08,0x00,0xe0,0x03,0xff,0xff,0x42,0x34,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,
+0x35,0x00,0x83,0x10,0x0f,0x1f,0x02,0x3c,0x03,0x00,0x82,0x28,0x16,0x00,0x40,0x10,
+0x03,0x00,0x02,0x24,0x01,0x00,0x02,0x24,0xf4,0xff,0x82,0x14,0x00,0x00,0x00,0x00,
+0x0f,0x1f,0x02,0x3c,0x08,0x00,0xe0,0x03,0x00,0x80,0x42,0x34,0xf0,0xff,0x82,0x14,
+0xff,0x1f,0x02,0x3c,0x01,0x00,0x02,0x24,0x29,0x00,0xa2,0x10,0x0f,0x10,0x02,0x3c,
+0x02,0x00,0xa2,0x28,0x1f,0x00,0x40,0x14,0x00,0x00,0x00,0x00,0x28,0x00,0xa3,0x10,
+0x00,0x00,0x00,0x00,0xe5,0xff,0xa4,0x14,0x00,0x00,0x00,0x00,0x0f,0x10,0x02,0x3c,
+0x08,0x00,0xe0,0x03,0x00,0xf0,0x42,0x34,0xe1,0xff,0x82,0x14,0xff,0x1f,0x02,0x3c,
+0x01,0x00,0x02,0x24,0x1c,0x00,0xa2,0x10,0x0f,0x00,0x02,0x3c,0x02,0x00,0xa2,0x28,
+0x0b,0x00,0x40,0x14,0x00,0x00,0x00,0x00,0x1c,0x00,0xa3,0x10,0x00,0x00,0x00,0x00,
+0xd6,0xff,0xa4,0x14,0x00,0x00,0x00,0x00,0x0f,0x00,0x02,0x3c,0x08,0x00,0xe0,0x03,
+0x00,0xf0,0x42,0x34,0x0f,0x10,0x02,0x3c,0x08,0x00,0xe0,0x03,0x00,0x80,0x42,0x34,
+0xce,0xff,0xa0,0x14,0x00,0x00,0x00,0x00,0x0f,0x00,0x02,0x3c,0x08,0x00,0xe0,0x03,
+0x15,0xf0,0x42,0x34,0xc9,0xff,0xa0,0x14,0x00,0x00,0x00,0x00,0x0f,0x10,0x02,0x3c,
+0x08,0x00,0xe0,0x03,0x15,0xf0,0x42,0x34,0x08,0x00,0xe0,0x03,0x00,0xf0,0x42,0x34,
+0x08,0x00,0xe0,0x03,0x10,0xf0,0x42,0x34,0x08,0x00,0xe0,0x03,0x10,0xf0,0x42,0x34,
+0x0f,0x10,0x02,0x3c,0x08,0x00,0xe0,0x03,0x05,0xf0,0x42,0x34,0x0f,0x00,0x02,0x3c,
+0x08,0x00,0xe0,0x03,0x05,0xf0,0x42,0x34,0xc0,0x40,0x04,0x00,0x21,0x18,0x04,0x01,
+0x80,0x18,0x03,0x00,0x21,0x18,0x64,0x00,0x02,0x80,0x02,0x3c,0x80,0x18,0x03,0x00,
+0x68,0x15,0x42,0x24,0x21,0x18,0x62,0x00,0x74,0x51,0x66,0x8c,0x21,0x38,0x60,0x00,
+0x7a,0x51,0x60,0xa0,0x7b,0x51,0x60,0xa0,0x1c,0x00,0x05,0x24,0xdf,0x0d,0x00,0x08,
+0x01,0x00,0x03,0x24,0x08,0x00,0xa0,0x04,0x21,0x10,0x04,0x01,0x04,0x10,0xa3,0x00,
+0x24,0x10,0xc2,0x00,0xfb,0xff,0x40,0x10,0xff,0xff,0xa5,0x24,0x01,0x00,0xa5,0x24,
+0x7a,0x51,0xe5,0xa0,0x21,0x10,0x04,0x01,0x80,0x10,0x02,0x00,0x21,0x10,0x44,0x00,
+0x02,0x80,0x03,0x3c,0x80,0x10,0x02,0x00,0x68,0x15,0x63,0x24,0x21,0x18,0x43,0x00,
+0x74,0x51,0x66,0x8c,0x21,0x28,0x00,0x00,0xf3,0x0d,0x00,0x08,0x01,0x00,0x07,0x24,
+0x1d,0x00,0xa2,0x28,0x08,0x00,0x40,0x10,0x00,0x00,0x00,0x00,0x04,0x10,0xa7,0x00,
+0x24,0x10,0xc2,0x00,0xfa,0xff,0x40,0x10,0x01,0x00,0xa5,0x24,0xff,0xff,0xa5,0x24,
+0x08,0x00,0xe0,0x03,0x7b,0x51,0x65,0xa0,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,
+0xc8,0xff,0xbd,0x27,0x28,0x00,0xb6,0xaf,0x02,0x80,0x16,0x3c,0x30,0x00,0xbe,0xaf,
+0x2c,0x00,0xb7,0xaf,0x24,0x00,0xb5,0xaf,0x20,0x00,0xb4,0xaf,0x18,0x00,0xb2,0xaf,
+0x14,0x00,0xb1,0xaf,0x01,0x00,0x15,0x24,0x21,0x88,0x00,0x00,0x68,0x15,0xde,0x26,
+0x21,0xa0,0x00,0x00,0x21,0x90,0x00,0x00,0x25,0xb0,0x17,0x3c,0x34,0x00,0xbf,0xaf,
+0x1c,0x00,0xb3,0xaf,0x14,0x0e,0x00,0x08,0x10,0x00,0xb0,0xaf,0x01,0x00,0x31,0x26,
+0x20,0x00,0x22,0x2e,0x94,0x00,0x52,0x26,0x2e,0x00,0x40,0x10,0x94,0x00,0x94,0x26,
+0x68,0x15,0xc2,0x26,0x21,0x30,0x42,0x02,0x78,0x51,0xc5,0x8c,0x00,0x00,0x00,0x00,
+0x02,0x13,0x05,0x00,0x01,0x00,0x42,0x30,0xf4,0xff,0x55,0x14,0x42,0x1a,0x05,0x00,
+0x68,0x51,0xc2,0x8c,0x07,0x00,0x64,0x30,0x02,0x11,0x02,0x00,0x7f,0x00,0x43,0x30,
+0x2d,0x00,0x95,0x10,0x07,0x00,0xb3,0x30,0x02,0x00,0x82,0x28,0x3a,0x00,0x40,0x14,
+0x02,0x00,0x02,0x24,0x30,0x00,0x82,0x10,0x03,0x00,0x02,0x24,0x3c,0x00,0x82,0x10,
+0x1a,0x00,0x62,0x2c,0x21,0x80,0x9e,0x02,0x78,0x51,0x02,0x8e,0x04,0x00,0x63,0x2e,
+0x42,0x12,0x02,0x00,0x0a,0x00,0x60,0x10,0x07,0x00,0x44,0x30,0x73,0x0d,0x00,0x0c,
+0x21,0x28,0x60,0x02,0x80,0x20,0x13,0x00,0x70,0x51,0x02,0xae,0x21,0x20,0x97,0x00,
+0x84,0x01,0x83,0x8c,0x00,0x00,0x00,0x00,0x24,0x18,0x62,0x00,0x74,0x51,0x03,0xae,
+0xce,0x0d,0x00,0x0c,0x21,0x20,0x20,0x02,0x21,0x10,0x37,0x02,0x01,0x00,0x31,0x26,
+0x60,0x01,0x43,0x90,0x20,0x00,0x22,0x2e,0x94,0x00,0x52,0x26,0xd4,0xff,0x40,0x14,
+0x94,0x00,0x94,0x26,0x34,0x00,0xbf,0x8f,0x30,0x00,0xbe,0x8f,0x2c,0x00,0xb7,0x8f,
+0x28,0x00,0xb6,0x8f,0x24,0x00,0xb5,0x8f,0x20,0x00,0xb4,0x8f,0x1c,0x00,0xb3,0x8f,
+0x18,0x00,0xb2,0x8f,0x14,0x00,0xb1,0x8f,0x10,0x00,0xb0,0x8f,0x21,0x10,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x38,0x00,0xbd,0x27,0x32,0x00,0x62,0x2c,0xda,0xff,0x40,0x10,
+0x21,0x80,0x9e,0x02,0xff,0xf1,0x03,0x24,0x24,0x10,0xa3,0x00,0x00,0x04,0x42,0x34,
+0x29,0x0e,0x00,0x08,0x78,0x51,0xc2,0xac,0x38,0x00,0x62,0x2c,0x12,0x00,0x40,0x14,
+0x14,0x00,0x62,0x2c,0xff,0xf1,0x03,0x24,0x24,0x10,0xa3,0x00,0x00,0x02,0x42,0x34,
+0x29,0x0e,0x00,0x08,0x78,0x51,0xc2,0xac,0xcb,0xff,0x80,0x14,0x21,0x80,0x9e,0x02,
+0xff,0xf1,0x03,0x24,0x24,0x10,0xa3,0x00,0x2a,0x0e,0x00,0x08,0x78,0x51,0xc2,0xac,
+0xc5,0xff,0x40,0x14,0x21,0x80,0x9e,0x02,0xff,0xf1,0x03,0x24,0x24,0x10,0xa3,0x00,
+0x54,0x0e,0x00,0x08,0x00,0x04,0x42,0x34,0xbf,0xff,0x40,0x10,0x21,0x80,0x9e,0x02,
+0xff,0xf1,0x03,0x24,0x24,0x10,0xa3,0x00,0x00,0x06,0x42,0x34,0x2a,0x0e,0x00,0x08,
+0x78,0x51,0xc2,0xac,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0xd8,0xff,0xbd,0x27,
+0x10,0x00,0xb0,0xaf,0xc0,0x80,0x04,0x00,0x21,0x80,0x04,0x02,0x80,0x80,0x10,0x00,
+0x21,0x80,0x04,0x02,0x02,0x80,0x02,0x3c,0x68,0x15,0x42,0x24,0x80,0x80,0x10,0x00,
+0x20,0x00,0xbf,0xaf,0x1c,0x00,0xb3,0xaf,0x18,0x00,0xb2,0xaf,0x21,0x80,0x02,0x02,
+0x14,0x00,0xb1,0xaf,0x78,0x51,0x03,0x8e,0x25,0xb0,0x02,0x3c,0x80,0x01,0x53,0x34,
+0x07,0x00,0x63,0x30,0x80,0x18,0x03,0x00,0x21,0x18,0x62,0x00,0x00,0x00,0x71,0x92,
+0x70,0x51,0x05,0x8e,0x84,0x01,0x62,0x8c,0x21,0x90,0x80,0x00,0xff,0x00,0x31,0x32,
+0x24,0x10,0x45,0x00,0xce,0x0d,0x00,0x0c,0x74,0x51,0x02,0xae,0x7a,0x51,0x04,0x92,
+0x5c,0x0d,0x00,0x0c,0xff,0x00,0x45,0x32,0x7a,0x51,0x04,0x92,0x63,0x0d,0x00,0x0c,
+0x00,0x00,0x00,0x00,0x01,0x00,0x42,0x38,0x04,0x00,0x03,0x24,0x0a,0x88,0x62,0x00,
+0x00,0x00,0x71,0xa2,0x20,0x00,0xbf,0x8f,0x1c,0x00,0xb3,0x8f,0x18,0x00,0xb2,0x8f,
+0x14,0x00,0xb1,0x8f,0x10,0x00,0xb0,0x8f,0x08,0x00,0xe0,0x03,0x28,0x00,0xbd,0x27,
+0xff,0xff,0x84,0x30,0x00,0x02,0x82,0x30,0x07,0x00,0x03,0x24,0x0d,0x00,0x40,0x14,
+0x0b,0x00,0x84,0x30,0x0c,0x00,0x82,0x2c,0x0a,0x00,0x40,0x10,0x00,0x00,0x00,0x00,
+0x02,0x80,0x03,0x3c,0x80,0x10,0x04,0x00,0xf0,0x91,0x63,0x24,0x21,0x10,0x43,0x00,
+0x00,0x00,0x44,0x8c,0x00,0x00,0x00,0x00,0x08,0x00,0x80,0x00,0x00,0x00,0x00,0x00,
+0x07,0x00,0x03,0x24,0x08,0x00,0xe0,0x03,0x21,0x10,0x60,0x00,0x06,0x00,0x03,0x24,
+0x08,0x00,0xe0,0x03,0x21,0x10,0x60,0x00,0x05,0x00,0x03,0x24,0x08,0x00,0xe0,0x03,
+0x21,0x10,0x60,0x00,0x04,0x00,0x03,0x24,0x08,0x00,0xe0,0x03,0x21,0x10,0x60,0x00,
+0x03,0x00,0x03,0x24,0x08,0x00,0xe0,0x03,0x21,0x10,0x60,0x00,0x02,0x00,0x03,0x24,
+0x08,0x00,0xe0,0x03,0x21,0x10,0x60,0x00,0x01,0x00,0x03,0x24,0x08,0x00,0xe0,0x03,
+0x21,0x10,0x60,0x00,0x21,0x18,0x00,0x00,0x08,0x00,0xe0,0x03,0x21,0x10,0x60,0x00,
+0xa0,0xff,0xbd,0x27,0x02,0x80,0x02,0x3c,0x58,0x00,0xbe,0xaf,0x54,0x00,0xb7,0xaf,
+0x50,0x00,0xb6,0xaf,0x4c,0x00,0xb5,0xaf,0x48,0x00,0xb4,0xaf,0x40,0x00,0xb2,0xaf,
+0x3c,0x00,0xb1,0xaf,0x5c,0x00,0xbf,0xaf,0x44,0x00,0xb3,0xaf,0x38,0x00,0xb0,0xaf,
+0x20,0x92,0x42,0x24,0x00,0x00,0x53,0x8c,0x08,0x00,0x03,0x24,0x02,0x80,0x0b,0x3c,
+0x21,0x90,0x00,0x00,0x21,0xa0,0x00,0x00,0x21,0xb8,0x00,0x00,0x21,0xf0,0x00,0x00,
+0x21,0xa8,0x00,0x00,0x21,0xb0,0x00,0x00,0x21,0x88,0x60,0x02,0x10,0x00,0xa3,0xaf,
+0x14,0x00,0xa0,0xaf,0x18,0x00,0xa0,0xaf,0x1c,0x00,0xa0,0xaf,0x20,0x00,0xa0,0xaf,
+0x24,0x00,0xa0,0xaf,0x28,0x00,0xa0,0xaf,0x7a,0x0f,0x00,0x08,0x2c,0x00,0xa0,0xaf,
+0x44,0x51,0x22,0xae,0x60,0x51,0x24,0x8e,0x5c,0x51,0x27,0x8e,0x48,0x51,0x28,0x8e,
+0x4c,0x51,0x25,0x8e,0x54,0x51,0x26,0x8e,0x58,0x51,0x23,0x8e,0x21,0x38,0xe4,0x00,
+0x02,0x80,0x04,0x3c,0x68,0x15,0x84,0x24,0x21,0x10,0x04,0x02,0x21,0x40,0x05,0x01,
+0x21,0x30,0xc3,0x00,0xca,0x44,0x42,0x90,0x44,0x51,0x2a,0x8e,0x0c,0x00,0xe0,0x10,
+0x21,0x48,0x00,0x00,0x2b,0x48,0x47,0x00,0x0b,0x00,0x20,0x15,0x02,0x80,0x02,0x3c,
+0x07,0x00,0x02,0x2e,0x59,0x01,0x40,0x14,0xc0,0x10,0x07,0x00,0x0c,0x00,0x02,0x24,
+0x55,0x01,0x02,0x12,0x0d,0x00,0x02,0x24,0x54,0x01,0x02,0x12,0xc0,0x10,0x07,0x00,
+0x92,0x00,0x20,0x11,0x02,0x80,0x02,0x3c,0x68,0x15,0x42,0x24,0x80,0x18,0x10,0x00,
+0x21,0x18,0x62,0x00,0x21,0x20,0x30,0x02,0xb6,0x51,0x85,0x90,0xec,0x44,0x62,0x8c,
+0x00,0x00,0x00,0x00,0x04,0x10,0xa2,0x00,0x2b,0x10,0x4a,0x00,0x87,0x00,0x40,0x10,
+0x00,0x00,0x00,0x00,0xd4,0x51,0x22,0x8e,0x01,0x00,0x07,0x24,0x04,0x18,0x07,0x02,
+0x24,0x10,0x43,0x00,0xf0,0x00,0x40,0x10,0x1c,0x00,0x02,0x2e,0x21,0x28,0x30,0x02,
+0x7c,0x51,0xa6,0x90,0xb6,0x51,0xa2,0x90,0x0a,0x00,0x04,0x24,0xff,0x00,0xc3,0x30,
+0x04,0x20,0x44,0x00,0x2a,0x18,0x64,0x00,0xe7,0x00,0x60,0x10,0x1c,0x00,0x02,0x2e,
+0x01,0x00,0xc2,0x24,0xff,0x00,0x43,0x30,0x56,0x01,0x64,0x10,0x7c,0x51,0xa2,0xa0,
+0x68,0x15,0x65,0x25,0x80,0x10,0x10,0x00,0x21,0x10,0x45,0x00,0x60,0x45,0x44,0x8c,
+0xec,0x44,0x43,0x8c,0x21,0x30,0xc5,0x02,0x40,0x10,0x04,0x00,0x21,0x10,0x44,0x00,
+0x21,0x18,0x62,0x00,0x82,0x50,0x03,0x00,0x44,0x51,0xca,0xac,0x8c,0x65,0xa3,0x8c,
+0xff,0xff,0x02,0x34,0x07,0x00,0x62,0x10,0x21,0x20,0x00,0x02,0x21,0x20,0x00,0x02,
+0xff,0x00,0x45,0x32,0x5c,0x0d,0x00,0x0c,0x30,0x00,0xab,0xaf,0x30,0x00,0xab,0x8f,
+0x21,0x20,0x00,0x02,0x63,0x0d,0x00,0x0c,0x30,0x00,0xab,0xaf,0x10,0x00,0xa4,0x8f,
+0x01,0x00,0x42,0x38,0x04,0x00,0x03,0x24,0x0a,0x20,0x62,0x00,0x10,0x00,0xa4,0xaf,
+0x30,0x00,0xab,0x8f,0x11,0x00,0x40,0x16,0x68,0x15,0x62,0x25,0x58,0x51,0x47,0x8c,
+0x54,0x51,0x43,0x8c,0x4c,0x51,0x44,0x94,0x48,0x51,0x45,0x94,0x50,0x51,0x46,0x94,
+0x21,0x18,0x67,0x00,0x00,0x24,0x04,0x00,0x25,0xb0,0x02,0x3c,0x00,0x1c,0x03,0x00,
+0x21,0x28,0xa4,0x00,0x21,0x30,0xc3,0x00,0x6c,0x0c,0x44,0x34,0x68,0x0c,0x42,0x34,
+0x00,0x00,0x45,0xac,0x00,0x00,0x86,0xac,0x68,0x15,0x62,0x25,0x21,0x10,0x82,0x02,
+0x58,0x51,0x40,0xac,0x5c,0x51,0x40,0xac,0x60,0x51,0x40,0xac,0x48,0x51,0x40,0xac,
+0x4c,0x51,0x40,0xac,0x50,0x51,0x40,0xac,0x54,0x51,0x40,0xac,0x2c,0x00,0xa2,0x8f,
+0x28,0x00,0xa4,0x8f,0x01,0x00,0x52,0x26,0x94,0x00,0x42,0x24,0x2c,0x00,0xa2,0xaf,
+0x24,0x00,0xa2,0x8f,0x94,0x00,0x84,0x24,0x28,0x00,0xa4,0xaf,0x94,0x00,0x42,0x24,
+0x20,0x00,0xa4,0x8f,0x24,0x00,0xa2,0xaf,0x1c,0x00,0xa2,0x8f,0x94,0x00,0x84,0x24,
+0x20,0x00,0xa4,0xaf,0x94,0x00,0x42,0x24,0x18,0x00,0xa4,0x8f,0x1c,0x00,0xa2,0xaf,
+0x14,0x00,0xa2,0x8f,0x94,0x00,0x84,0x24,0x20,0x00,0x43,0x2a,0x94,0x00,0x42,0x24,
+0x94,0x00,0x31,0x26,0x94,0x00,0xd6,0x26,0x94,0x00,0xb5,0x26,0x18,0x00,0xa4,0xaf,
+0x14,0x00,0xa2,0xaf,0x94,0x00,0xde,0x27,0x94,0x00,0x73,0x26,0x94,0x00,0xf7,0x26,
+0xe5,0x00,0x60,0x10,0x94,0x00,0x94,0x26,0x78,0x51,0x22,0x8e,0x00,0x00,0x00,0x00,
+0x02,0x13,0x02,0x00,0x01,0x00,0x42,0x30,0xd3,0xff,0x40,0x10,0x25,0xb0,0x02,0x3c,
+0x21,0x10,0x42,0x02,0x60,0x01,0x44,0x90,0x60,0x51,0x23,0x8e,0x5c,0x51,0x26,0x8e,
+0xff,0x00,0x90,0x30,0x02,0x80,0x04,0x3c,0x68,0x15,0x84,0x24,0x21,0x10,0x04,0x02,
+0x73,0x44,0x44,0x90,0x56,0x44,0x45,0x90,0x44,0x51,0x27,0x8e,0x18,0x00,0x64,0x00,
+0x12,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x00,0xc5,0x00,
+0x12,0x30,0x00,0x00,0x21,0x30,0xc3,0x00,0x2b,0x10,0xe6,0x00,0x54,0xff,0x40,0x10,
+0x23,0x10,0xe6,0x00,0xe9,0x0e,0x00,0x08,0x44,0x51,0x20,0xae,0x62,0x00,0xe0,0x10,
+0x00,0x00,0x00,0x00,0x63,0x00,0x20,0x15,0x68,0x15,0x62,0x25,0x40,0x10,0x07,0x00,
+0x21,0x10,0x47,0x00,0x82,0x10,0x02,0x00,0x2b,0x10,0x46,0x00,0x99,0xff,0x40,0x10,
+0x21,0x20,0x00,0x02,0x68,0x15,0x68,0x25,0x21,0x20,0xa8,0x02,0x21,0x30,0x90,0x00,
+0xd4,0x51,0x83,0x8c,0x01,0x00,0x05,0x24,0x04,0x10,0x05,0x02,0x99,0x51,0xc7,0x90,
+0x27,0x10,0x02,0x00,0x24,0x18,0x62,0x00,0xd4,0x51,0x83,0xac,0x09,0x00,0xe5,0x10,
+0x7c,0x51,0xc0,0xa0,0x18,0x00,0xa2,0x8f,0x21,0x38,0x00,0x00,0x21,0x20,0x48,0x00,
+0x21,0x18,0x87,0x00,0x01,0x00,0xe7,0x24,0x1d,0x00,0xe2,0x28,0xfc,0xff,0x40,0x14,
+0xb6,0x51,0x60,0xa0,0x14,0x00,0xa4,0x8f,0x68,0x15,0x63,0x25,0x21,0x50,0x60,0x00,
+0x21,0x10,0x83,0x00,0x21,0x10,0x50,0x00,0x99,0x51,0x40,0xa0,0x02,0x80,0x03,0x3c,
+0x02,0x80,0x02,0x3c,0x4c,0x91,0x49,0x24,0xd8,0x90,0x68,0x24,0x21,0x38,0x00,0x00,
+0x80,0x18,0x07,0x00,0x21,0x10,0x69,0x00,0x21,0x20,0x68,0x00,0x00,0x00,0x46,0x8c,
+0x00,0x00,0x85,0x8c,0x01,0x00,0xe7,0x24,0x21,0x18,0x6a,0x00,0x1d,0x00,0xe2,0x28,
+0xec,0x44,0x65,0xac,0xf6,0xff,0x40,0x14,0x60,0x45,0x66,0xac,0x14,0x00,0x00,0x12,
+0x68,0x15,0x63,0x25,0x7b,0x51,0x62,0x92,0xff,0xff,0x07,0x26,0x2a,0x10,0xe2,0x00,
+0x0e,0x00,0x40,0x14,0x02,0x80,0x0b,0x3c,0x68,0x15,0x62,0x25,0x21,0x10,0xc2,0x03,
+0x7b,0x51,0x45,0x90,0x74,0x51,0x44,0x8c,0x01,0x00,0x06,0x24,0x04,0x18,0xe6,0x00,
+0x24,0x10,0x83,0x00,0xb3,0x00,0x43,0x10,0x00,0x00,0x00,0x00,0xff,0xff,0xe7,0x24,
+0x2a,0x10,0xe5,0x00,0xfa,0xff,0x40,0x10,0x04,0x18,0xe6,0x00,0x68,0x15,0x63,0x25,
+0x80,0x10,0x10,0x00,0x21,0x10,0x43,0x00,0x60,0x45,0x45,0x8c,0xec,0x44,0x44,0x8c,
+0x02,0x80,0x03,0x3c,0x40,0x10,0x05,0x00,0x8e,0x7d,0x66,0x90,0x21,0x10,0x45,0x00,
+0x21,0x20,0x82,0x00,0x22,0x00,0x02,0x24,0x98,0x00,0xc2,0x10,0x82,0x50,0x04,0x00,
+0xd4,0x51,0x63,0x8e,0x01,0x00,0x02,0x24,0x04,0x10,0x02,0x02,0x25,0x18,0x62,0x00,
+0xd4,0x51,0x63,0xae,0x68,0x15,0x63,0x25,0x21,0x10,0xe3,0x02,0x44,0x51,0x4a,0xac,
+0x8c,0x65,0x64,0x8c,0xff,0xff,0x02,0x34,0x3c,0xff,0x82,0x14,0x21,0x20,0x00,0x02,
+0x39,0x0f,0x00,0x08,0x00,0x00,0x00,0x00,0x3e,0xff,0x20,0x11,0x21,0x20,0x00,0x02,
+0x68,0x15,0x62,0x25,0x80,0x18,0x10,0x00,0x21,0x18,0x62,0x00,0x60,0x45,0x64,0x8c,
+0x00,0x00,0x00,0x00,0x2b,0x20,0x44,0x01,0x36,0xff,0x80,0x10,0x21,0x20,0x00,0x02,
+0xa2,0x0f,0x00,0x08,0x68,0x15,0x68,0x25,0x1e,0xff,0x40,0x10,0x68,0x15,0x65,0x25,
+0x21,0x20,0x30,0x02,0x99,0x51,0x83,0x90,0x01,0x00,0x02,0x24,0x63,0x00,0x62,0x10,
+0x02,0x80,0x02,0x3c,0x2c,0x00,0xa3,0x8f,0x68,0x15,0x42,0x24,0x21,0x38,0x00,0x00,
+0x21,0x20,0x62,0x00,0x21,0x18,0x87,0x00,0x01,0x00,0xe7,0x24,0x1d,0x00,0xe2,0x28,
+0xfc,0xff,0x40,0x14,0xb6,0x51,0x60,0xa0,0x28,0x00,0xa3,0x8f,0x02,0x80,0x0b,0x3c,
+0x68,0x15,0x65,0x25,0x21,0x30,0x65,0x00,0xd4,0x51,0xc2,0x8c,0x01,0x00,0x03,0x24,
+0x04,0x18,0x03,0x02,0x27,0x18,0x03,0x00,0x21,0x20,0xd0,0x00,0x24,0x10,0x43,0x00,
+0x99,0x51,0x80,0xa0,0xd4,0x51,0xc2,0xac,0x12,0x00,0x00,0x16,0x7c,0x51,0x80,0xa0,
+0x7a,0x51,0xc2,0x90,0x00,0x00,0x00,0x00,0x0e,0x00,0x40,0x10,0x01,0x00,0x07,0x24,
+0x24,0x00,0xa4,0x8f,0x01,0x00,0x06,0x24,0x21,0x10,0x85,0x00,0x7a,0x51,0x44,0x90,
+0x74,0x51,0x45,0x8c,0x04,0x18,0xe6,0x00,0x24,0x10,0xa3,0x00,0x5b,0x00,0x43,0x10,
+0x00,0x00,0x00,0x00,0x01,0x00,0xe7,0x24,0x2a,0x10,0x87,0x00,0xfa,0xff,0x40,0x10,
+0x04,0x18,0xe6,0x00,0x20,0x00,0xa2,0x8f,0x02,0x80,0x0b,0x3c,0x68,0x15,0x64,0x25,
+0x21,0x18,0x44,0x00,0x7a,0x51,0x62,0x90,0x01,0x00,0x07,0x26,0x2a,0x10,0x47,0x00,
+0x0e,0x00,0x40,0x14,0x01,0x00,0x06,0x24,0x1c,0x00,0xa3,0x8f,0x00,0x00,0x00,0x00,
+0x21,0x10,0x64,0x00,0x7a,0x51,0x45,0x90,0x74,0x51,0x44,0x8c,0x04,0x18,0xe6,0x00,
+0x24,0x10,0x83,0x00,0x42,0x00,0x43,0x10,0x00,0x00,0x00,0x00,0x01,0x00,0xe7,0x24,
+0x2a,0x10,0xa7,0x00,0xfa,0xff,0x40,0x10,0x04,0x18,0xe6,0x00,0x02,0x80,0x02,0x3c,
+0x8e,0x7d,0x44,0x90,0x22,0x00,0x03,0x24,0xd6,0xfe,0x83,0x14,0x68,0x15,0x65,0x25,
+0xee,0xff,0x02,0x26,0xff,0x00,0x42,0x30,0x02,0x00,0x42,0x2c,0x18,0x00,0x03,0x24,
+0x25,0x0f,0x00,0x08,0x0b,0x80,0x62,0x00,0xc0,0x10,0x07,0x00,0x23,0x10,0x47,0x00,
+0xc2,0x10,0x02,0x00,0x2b,0x10,0x48,0x00,0xb6,0xfe,0x40,0x14,0x00,0x00,0x00,0x00,
+0x04,0x0f,0x00,0x08,0x00,0x00,0x00,0x00,0x10,0x00,0xa3,0x8f,0x5c,0x00,0xbf,0x8f,
+0x58,0x00,0xbe,0x8f,0x54,0x00,0xb7,0x8f,0x50,0x00,0xb6,0x8f,0x4c,0x00,0xb5,0x8f,
+0x48,0x00,0xb4,0x8f,0x44,0x00,0xb3,0x8f,0x40,0x00,0xb2,0x8f,0x3c,0x00,0xb1,0x8f,
+0x38,0x00,0xb0,0x8f,0x25,0xb0,0x02,0x3c,0x80,0x01,0x42,0x34,0x60,0x00,0xbd,0x27,
+0x00,0x00,0x43,0xa0,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x18,0x00,0x02,0x2e,
+0x0a,0x00,0x40,0x14,0x05,0x00,0x02,0x2e,0xb6,0x51,0x83,0x90,0x00,0x00,0x00,0x00,
+0x05,0x00,0x62,0x2c,0xa0,0xff,0x40,0x10,0x01,0x00,0x62,0x24,0x16,0x10,0x00,0x08,
+0xb6,0x51,0x82,0xa0,0x24,0x0f,0x00,0x08,0x99,0x51,0xa7,0xa0,0x04,0x00,0x40,0x10,
+0x00,0x00,0x00,0x00,0xb6,0x51,0x83,0x90,0x75,0x10,0x00,0x08,0x03,0x00,0x62,0x2c,
+0xb6,0x51,0x83,0x90,0x75,0x10,0x00,0x08,0x04,0x00,0x62,0x2c,0x13,0x00,0x02,0x24,
+0x67,0xff,0x02,0x16,0x68,0x15,0x63,0x25,0xf3,0x0f,0x00,0x08,0x21,0x10,0xe3,0x02,
+0xff,0x00,0xf0,0x30,0x4c,0x10,0x00,0x08,0x02,0x80,0x02,0x3c,0x35,0x10,0x00,0x08,
+0xff,0x00,0xf0,0x30,0xdf,0x0f,0x00,0x08,0xff,0x00,0xf0,0x30,0xd8,0xff,0xbd,0x27,
+0x02,0x80,0x02,0x3c,0x14,0x00,0xb1,0xaf,0x24,0x00,0xbf,0xaf,0x20,0x00,0xb4,0xaf,
+0x1c,0x00,0xb3,0xaf,0x18,0x00,0xb2,0xaf,0x10,0x00,0xb0,0xaf,0x68,0x15,0x45,0x24,
+0x05,0x65,0xa4,0x90,0x00,0x65,0xa3,0x8c,0xfc,0x64,0xa2,0x8c,0x21,0x88,0x64,0x00,
+0x2b,0x10,0x22,0x02,0x60,0x00,0x40,0x10,0x21,0x80,0xa0,0x00,0x02,0x80,0x14,0x3c,
+0x21,0x98,0xa0,0x00,0xa8,0x10,0x00,0x08,0x21,0x90,0xa0,0x00,0xfc,0x64,0x42,0x8e,
+0x10,0x00,0x31,0x26,0x2b,0x10,0x22,0x02,0x57,0x00,0x40,0x10,0x21,0x80,0x40,0x02,
+0x05,0x65,0x02,0x92,0xff,0xff,0x23,0x32,0x02,0x80,0x05,0x3c,0x10,0x00,0x42,0x24,
+0x25,0x28,0x65,0x00,0x2c,0x79,0x84,0x26,0x10,0x00,0x06,0x24,0x9f,0x45,0x00,0x0c,
+0x05,0x65,0x02,0xa2,0xc8,0x63,0x06,0x8e,0x00,0x00,0x00,0x00,0x42,0x24,0x06,0x00,
+0x1f,0x00,0x84,0x30,0xc0,0x10,0x04,0x00,0x21,0x10,0x44,0x00,0x80,0x10,0x02,0x00,
+0x21,0x10,0x44,0x00,0x80,0x10,0x02,0x00,0x21,0x38,0x50,0x00,0x78,0x51,0xe3,0x8c,
+0x00,0x00,0x00,0x00,0x02,0x1b,0x03,0x00,0x01,0x00,0x63,0x30,0xe3,0xff,0x60,0x10,
+0x25,0xb0,0x02,0x3c,0xc4,0x63,0x05,0x8e,0x21,0x10,0x82,0x00,0x60,0x01,0x44,0x90,
+0x82,0x1d,0x05,0x00,0x3f,0x00,0x63,0x30,0x04,0x00,0x0a,0x24,0x05,0x00,0x62,0x28,
+0x21,0x40,0x40,0x01,0x0b,0x40,0x62,0x00,0x07,0x00,0xa0,0x04,0xff,0x00,0x89,0x30,
+0x64,0x51,0xe2,0x8c,0x04,0x00,0x08,0x24,0x01,0x00,0x42,0x24,0x64,0x51,0xe2,0xac,
+0xc8,0x63,0x66,0x8e,0x00,0x00,0x00,0x00,0x02,0x13,0x06,0x00,0x1f,0x00,0x42,0x30,
+0x08,0x00,0x42,0x28,0xcd,0xff,0x40,0x10,0x00,0x00,0x00,0x00,0xc4,0x63,0x62,0x8e,
+0x00,0x00,0x00,0x00,0x3f,0x00,0x42,0x30,0xc8,0xff,0x49,0x14,0x00,0x00,0x00,0x00,
+0x29,0x00,0x00,0x11,0x01,0x00,0x02,0x24,0x2e,0x00,0x02,0x11,0x02,0x00,0x02,0x24,
+0x33,0x00,0x02,0x11,0x03,0x00,0x02,0x24,0x38,0x00,0x02,0x11,0x00,0x00,0x00,0x00,
+0x3b,0x00,0x0a,0x11,0x00,0x00,0x00,0x00,0x68,0x51,0xe2,0x8c,0x21,0x18,0x33,0x01,
+0x90,0x44,0x64,0x90,0x02,0x11,0x02,0x00,0x2b,0x10,0x44,0x00,0x3e,0x00,0x40,0x14,
+0x00,0x00,0x00,0x00,0x5c,0x51,0xe3,0x8c,0x80,0x10,0x09,0x00,0x21,0x10,0x49,0x00,
+0x01,0x00,0x63,0x24,0x21,0x10,0x53,0x00,0x5c,0x51,0xe3,0xac,0x21,0x10,0x48,0x00,
+0x34,0x43,0x44,0x90,0x44,0x51,0xe3,0x8c,0x00,0x00,0x00,0x00,0x21,0x18,0x64,0x00,
+0x44,0x51,0xe3,0xac,0xfc,0x64,0x42,0x8e,0x10,0x00,0x31,0x26,0x2b,0x10,0x22,0x02,
+0xab,0xff,0x40,0x14,0x21,0x80,0x40,0x02,0x24,0x00,0xbf,0x8f,0x20,0x00,0xb4,0x8f,
+0x1c,0x00,0xb3,0x8f,0x18,0x00,0xb2,0x8f,0x14,0x00,0xb1,0x8f,0x10,0x00,0xb0,0x8f,
+0x08,0x00,0xe0,0x03,0x28,0x00,0xbd,0x27,0x48,0x51,0xe2,0x8c,0x00,0x00,0x00,0x00,
+0x01,0x00,0x42,0x24,0x48,0x51,0xe2,0xac,0x01,0x00,0x02,0x24,0xd4,0xff,0x02,0x15,
+0x02,0x00,0x02,0x24,0x4c,0x51,0xe2,0x8c,0x00,0x00,0x00,0x00,0x01,0x00,0x42,0x24,
+0x4c,0x51,0xe2,0xac,0x02,0x00,0x02,0x24,0xcf,0xff,0x02,0x15,0x03,0x00,0x02,0x24,
+0x50,0x51,0xe2,0x8c,0x00,0x00,0x00,0x00,0x01,0x00,0x42,0x24,0x50,0x51,0xe2,0xac,
+0x03,0x00,0x02,0x24,0xca,0xff,0x02,0x15,0x00,0x00,0x00,0x00,0x54,0x51,0xe2,0x8c,
+0x00,0x00,0x00,0x00,0x01,0x00,0x42,0x24,0xc7,0xff,0x0a,0x15,0x54,0x51,0xe2,0xac,
+0x58,0x51,0xe2,0x8c,0x21,0x18,0x33,0x01,0x01,0x00,0x42,0x24,0x58,0x51,0xe2,0xac,
+0x68,0x51,0xe2,0x8c,0x90,0x44,0x64,0x90,0x02,0x11,0x02,0x00,0x2b,0x10,0x44,0x00,
+0xc4,0xff,0x40,0x10,0x00,0x00,0x00,0x00,0x60,0x51,0xe3,0x8c,0x80,0x10,0x09,0x00,
+0x21,0x10,0x49,0x00,0x01,0x00,0x63,0x24,0x21,0x10,0x53,0x00,0x60,0x51,0xe3,0xac,
+0x21,0x10,0x48,0x00,0xc5,0x43,0x44,0x90,0x44,0x51,0xe3,0x8c,0x00,0x00,0x00,0x00,
+0x21,0x18,0x64,0x00,0xf9,0x10,0x00,0x08,0x44,0x51,0xe3,0xac,0x25,0xb0,0x02,0x3c,
+0x25,0xb0,0x05,0x3c,0x02,0x80,0x03,0x3c,0x58,0x00,0x4a,0x34,0x5c,0x00,0x4b,0x34,
+0x4c,0x00,0xa2,0x34,0x00,0x00,0x44,0x90,0x68,0x15,0x66,0x24,0xed,0x4a,0xc2,0x90,
+0x29,0xb0,0x07,0x3c,0x03,0x00,0x84,0x30,0x21,0x18,0xc0,0x00,0x0f,0x00,0x44,0x10,
+0x04,0x00,0xe8,0x34,0x07,0x00,0x80,0x14,0x58,0x0c,0xa9,0x34,0xe6,0x42,0xc2,0x90,
+0x1c,0x00,0x06,0x24,0x03,0x00,0x40,0x14,0x50,0x0c,0xa5,0x34,0x00,0x00,0xa6,0xa0,
+0x00,0x00,0x26,0xa1,0x00,0x00,0x42,0x8d,0xed,0x4a,0x64,0xa0,0x00,0x00,0xe2,0xac,
+0x00,0x00,0x62,0x8d,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0xad,0x08,0x00,0xe0,0x03,
+0x21,0x10,0x00,0x00,0x25,0xb0,0x0d,0x3c,0xe8,0xff,0xbd,0x27,0x10,0x00,0xbf,0xaf,
+0x2d,0x0a,0xa7,0x35,0xa2,0x0d,0xa2,0x35,0xa4,0x0d,0xa3,0x35,0xa6,0x0d,0xa4,0x35,
+0xa8,0x0d,0xa5,0x35,0x00,0x00,0x48,0x94,0x00,0x00,0x69,0x94,0x00,0x00,0x8a,0x94,
+0x00,0x00,0xab,0x94,0x00,0x00,0xe3,0x90,0x5b,0x0a,0xa4,0x35,0x5c,0x0a,0xa6,0x35,
+0x00,0x2e,0x03,0x00,0x03,0x2e,0x05,0x00,0x40,0x00,0xa2,0x34,0x00,0x00,0xe2,0xa0,
+0x00,0x00,0x85,0x90,0x00,0x00,0xc3,0x90,0x02,0x80,0x0e,0x3c,0x68,0x15,0xcc,0x25,
+0xff,0xff,0x22,0x31,0xff,0x00,0xa5,0x30,0xff,0xff,0x04,0x31,0x21,0x20,0x82,0x00,
+0xff,0x00,0x63,0x30,0x00,0x40,0x87,0x8d,0x00,0x2a,0x05,0x00,0xff,0xff,0x46,0x31,
+0x21,0x28,0xa3,0x00,0xff,0xff,0x62,0x31,0x21,0x20,0x86,0x00,0x21,0x20,0x82,0x00,
+0xff,0xff,0xa3,0x30,0x64,0x0c,0xa2,0x35,0x00,0x00,0x45,0xa4,0x21,0x20,0x83,0x00,
+0x0f,0x00,0xe7,0x30,0x01,0x00,0x02,0x24,0xe0,0x42,0x84,0xad,0xd8,0x42,0x88,0xa5,
+0xda,0x42,0x89,0xa5,0xdc,0x42,0x8a,0xa5,0xde,0x42,0x8b,0xa5,0x07,0x00,0xe2,0x10,
+0xe4,0x42,0x85,0xa5,0xa8,0x56,0x00,0x0c,0x00,0x00,0x00,0x00,0x10,0x00,0xbf,0x8f,
+0x21,0x10,0x00,0x00,0x08,0x00,0xe0,0x03,0x18,0x00,0xbd,0x27,0x4c,0x00,0xa3,0x35,
+0x00,0x00,0x62,0x90,0x00,0x00,0x00,0x00,0x03,0x00,0x42,0x30,0x67,0x00,0x47,0x10,
+0x68,0x15,0xc4,0x25,0xe6,0x42,0x82,0x90,0x00,0x00,0x00,0x00,0x2d,0x00,0x40,0x10,
+0x01,0x00,0x03,0x24,0x68,0x15,0xc5,0x25,0xe6,0x42,0xa3,0x90,0xff,0x00,0x02,0x24,
+0xec,0xff,0x62,0x14,0x25,0xb0,0x03,0x3c,0xc8,0x42,0xa2,0x94,0xe0,0x42,0xa6,0x8c,
+0x50,0x0c,0x63,0x34,0x00,0x00,0x64,0x90,0x2b,0x10,0xc2,0x00,0x5e,0x00,0x40,0x14,
+0x7f,0x00,0x84,0x30,0xca,0x42,0xa2,0x94,0x00,0x00,0x00,0x00,0x2b,0x10,0xc2,0x00,
+0x09,0x00,0x40,0x14,0x00,0x00,0x00,0x00,0xcc,0x42,0xa2,0x94,0x00,0x00,0x00,0x00,
+0x2b,0x10,0xc2,0x00,0x02,0x00,0x40,0x10,0x02,0x00,0x82,0x24,0x01,0x00,0x82,0x24,
+0xff,0x00,0x44,0x30,0x68,0x15,0xc5,0x25,0xd0,0x42,0xa3,0x90,0x00,0x00,0x00,0x00,
+0x2b,0x10,0x64,0x00,0x4e,0x00,0x40,0x10,0x00,0x00,0x00,0x00,0x21,0x20,0x60,0x00,
+0x68,0x15,0xc3,0x25,0xe0,0x42,0x62,0x8c,0x00,0x00,0x00,0x00,0xe9,0x03,0x42,0x2c,
+0x02,0x00,0x40,0x14,0x25,0xb0,0x02,0x3c,0xd0,0x42,0x64,0x90,0x58,0x0c,0x43,0x34,
+0x50,0x0c,0x42,0x34,0x00,0x00,0x44,0xa0,0x00,0x00,0x64,0xa0,0x85,0x11,0x00,0x08,
+0x00,0x00,0x00,0x00,0x00,0x40,0x82,0x8c,0x00,0x00,0x00,0x00,0x02,0x12,0x02,0x00,
+0x0f,0x00,0x42,0x30,0xd0,0xff,0x43,0x14,0x68,0x15,0xc5,0x25,0x25,0xb0,0x02,0x3c,
+0x4c,0x00,0x42,0x34,0x00,0x00,0x43,0x90,0x00,0x00,0x00,0x00,0x03,0x00,0x63,0x30,
+0xb8,0xff,0x60,0x10,0xff,0xff,0x02,0x34,0xdc,0x63,0x83,0x8c,0x00,0x00,0x00,0x00,
+0xb4,0xff,0x62,0x10,0x00,0x00,0x00,0x00,0xe0,0x42,0x83,0x8c,0x00,0x00,0x00,0x00,
+0x65,0x00,0x62,0x2c,0x3b,0x00,0x40,0x14,0x28,0x00,0x62,0x2c,0xd2,0x42,0x83,0x90,
+0x00,0x00,0x00,0x00,0x00,0x16,0x03,0x00,0x03,0x16,0x02,0x00,0xfe,0xff,0x42,0x24,
+0xfc,0xff,0x42,0x28,0x02,0x00,0x40,0x10,0xfe,0xff,0x62,0x24,0xfc,0xff,0x02,0x24,
+0xd2,0x42,0x82,0xa0,0x68,0x15,0xc4,0x25,0xdc,0x63,0x82,0x8c,0xd2,0x42,0x83,0x90,
+0xce,0x42,0x86,0x90,0x02,0x11,0x02,0x00,0x7f,0x00,0x42,0x30,0x0a,0x00,0x45,0x24,
+0x23,0x18,0xa3,0x00,0x00,0x2e,0x03,0x00,0x03,0x2e,0x05,0x00,0xff,0x00,0xc2,0x30,
+0x2a,0x10,0x45,0x00,0x17,0x00,0x40,0x10,0x25,0xb0,0x02,0x3c,0x00,0x2e,0x06,0x00,
+0x03,0x2e,0x05,0x00,0x58,0x0c,0x43,0x34,0x50,0x0c,0x42,0x34,0x00,0x00,0x45,0xa0,
+0x00,0x00,0x65,0xa0,0x85,0x11,0x00,0x08,0x00,0x00,0x00,0x00,0xe6,0x42,0x82,0x91,
+0x00,0x00,0x00,0x00,0x97,0xff,0x40,0x14,0x00,0x00,0x00,0x00,0xff,0xff,0x02,0x24,
+0x91,0x11,0x00,0x08,0xe6,0x42,0x82,0xa1,0xac,0x11,0x00,0x08,0xff,0xff,0x82,0x24,
+0xd1,0x42,0xa3,0x90,0x00,0x00,0x00,0x00,0x2b,0x10,0x83,0x00,0xb4,0x11,0x00,0x08,
+0x0b,0x20,0x62,0x00,0xcf,0x42,0x83,0x80,0x00,0x00,0x00,0x00,0xff,0x00,0x62,0x30,
+0x2a,0x10,0xa2,0x00,0x0b,0x28,0x62,0x00,0x25,0xb0,0x02,0x3c,0x58,0x0c,0x43,0x34,
+0x50,0x0c,0x42,0x34,0x00,0x00,0x45,0xa0,0x00,0x00,0x65,0xa0,0x85,0x11,0x00,0x08,
+0x00,0x00,0x00,0x00,0xcf,0xff,0x40,0x10,0x00,0x00,0x00,0x00,0xd2,0x42,0x83,0x90,
+0x00,0x00,0x00,0x00,0x00,0x16,0x03,0x00,0x03,0x16,0x02,0x00,0x02,0x00,0x42,0x24,
+0x0d,0x00,0x42,0x28,0x03,0x00,0x40,0x14,0x00,0x00,0x00,0x00,0xe0,0x11,0x00,0x08,
+0x0c,0x00,0x02,0x24,0xe0,0x11,0x00,0x08,0x02,0x00,0x62,0x24,0xc0,0xff,0xbd,0x27,
+0x18,0x00,0xb0,0xaf,0x25,0xb0,0x10,0x3c,0x28,0x00,0xb4,0xaf,0x24,0x00,0xb3,0xaf,
+0x1c,0x00,0xb1,0xaf,0x3c,0x00,0xbf,0xaf,0x38,0x00,0xbe,0xaf,0x34,0x00,0xb7,0xaf,
+0x30,0x00,0xb6,0xaf,0x2c,0x00,0xb5,0xaf,0x20,0x00,0xb2,0xaf,0xd8,0x00,0x06,0x36,
+0x00,0x00,0xc3,0x90,0x02,0x80,0x02,0x3c,0x68,0x15,0x54,0x24,0x2a,0xb0,0x11,0x3c,
+0xa0,0xff,0x02,0x24,0x25,0x18,0x62,0x00,0x34,0x00,0x25,0x36,0xfe,0xff,0x02,0x24,
+0xbc,0x42,0x92,0x92,0x40,0x00,0x04,0x24,0x00,0x00,0xc3,0xa0,0x00,0x00,0xa2,0xa0,
+0xa1,0x4e,0x00,0x0c,0x00,0x96,0x12,0x00,0x21,0x98,0x40,0x00,0x6b,0x00,0x60,0x12,
+0x00,0x40,0x02,0x3c,0x08,0x00,0x63,0x8e,0xb0,0x03,0x02,0x36,0x21,0x20,0x60,0x02,
+0x00,0x00,0x43,0xac,0x3a,0x45,0x00,0x0c,0x21,0xb8,0x80,0x02,0x01,0x00,0x1e,0x24,
+0x42,0x00,0x16,0x36,0x03,0x0c,0x11,0x36,0x17,0x0e,0x15,0x36,0x04,0x00,0x14,0x24,
+0x2a,0xb0,0x03,0x3c,0x06,0x00,0x63,0x34,0x00,0x00,0x62,0x94,0x00,0x00,0x00,0x00,
+0x00,0xff,0x42,0x30,0x0a,0x00,0x40,0x18,0x00,0x00,0x00,0x00,0x02,0x80,0x04,0x3c,
+0xc8,0x94,0x84,0x24,0x00,0x00,0x83,0x8c,0x00,0x00,0x00,0x00,0x00,0x00,0x62,0x94,
+0x00,0x00,0x00,0x00,0x00,0xff,0x42,0x30,0xfc,0xff,0x40,0x1c,0x00,0x00,0x00,0x00,
+0x08,0x00,0x65,0x8e,0x20,0x10,0x06,0x3c,0x00,0xfe,0xc6,0x34,0x40,0x00,0x07,0x24,
+0x01,0x00,0x04,0x24,0x10,0x01,0x00,0x0c,0x10,0x00,0xbe,0xaf,0x4d,0x01,0x00,0x0c,
+0x01,0x00,0x04,0x24,0x2a,0xb0,0x02,0x3c,0x05,0x00,0x42,0x34,0xff,0xff,0x03,0x24,
+0x00,0x00,0x5e,0xa0,0x00,0x00,0xc3,0xa2,0x00,0x00,0x22,0x92,0xc1,0x42,0xe5,0x92,
+0x2a,0xb0,0x04,0x3c,0x02,0x00,0x03,0x24,0x40,0x00,0x42,0x34,0x05,0x00,0x84,0x34,
+0x00,0x00,0x22,0xa2,0x00,0x00,0x83,0xa0,0xef,0xff,0x02,0x24,0x00,0x00,0xb0,0x92,
+0x64,0x00,0x04,0x24,0x00,0x00,0xa5,0xa2,0x00,0x00,0xc2,0xa2,0xb3,0x0a,0x00,0x0c,
+0x00,0x00,0x00,0x00,0x00,0x00,0x22,0x92,0xbf,0xff,0x03,0x24,0x84,0x03,0x04,0x24,
+0x24,0x10,0x43,0x00,0x00,0x00,0x22,0xa2,0xb3,0x0a,0x00,0x0c,0xff,0x00,0x10,0x32,
+0x25,0xb0,0x02,0x3c,0xf4,0x08,0x42,0x34,0x00,0x00,0x44,0x8c,0x00,0x00,0xb0,0xa2,
+0x00,0x00,0xc0,0xa2,0x00,0x00,0x22,0x92,0xbe,0x42,0xe3,0x92,0x1f,0x00,0x85,0x30,
+0x40,0x00,0x42,0x34,0x00,0x00,0x22,0xa2,0x00,0x80,0x02,0x3c,0xdf,0x07,0x42,0x34,
+0x2b,0x18,0xa3,0x00,0x09,0x00,0x60,0x10,0x24,0x20,0x82,0x00,0xbf,0x42,0xe2,0x92,
+0x00,0x00,0x00,0x00,0x2b,0x10,0x45,0x00,0x05,0x00,0x40,0x10,0x02,0x80,0x02,0x3c,
+0x01,0x00,0x02,0x3c,0x25,0x10,0xa2,0x00,0x21,0x90,0x42,0x02,0x02,0x80,0x02,0x3c,
+0x8e,0x7d,0x43,0x90,0x22,0x00,0x02,0x24,0x1c,0x00,0x62,0x10,0x92,0x00,0x02,0x24,
+0x1b,0x00,0x62,0x10,0x02,0x80,0x03,0x3c,0xff,0xff,0x94,0x26,0xb3,0x0a,0x00,0x0c,
+0xf4,0x01,0x04,0x24,0xab,0xff,0x81,0x06,0x2a,0xb0,0x03,0x3c,0x04,0x00,0x60,0x12,
+0x25,0xb0,0x02,0x3c,0xbd,0x4e,0x00,0x0c,0x21,0x20,0x60,0x02,0x25,0xb0,0x02,0x3c,
+0xd8,0x02,0x42,0x34,0x00,0x00,0x52,0xac,0x21,0x10,0x40,0x02,0x3c,0x00,0xbf,0x8f,
+0x38,0x00,0xbe,0x8f,0x34,0x00,0xb7,0x8f,0x30,0x00,0xb6,0x8f,0x2c,0x00,0xb5,0x8f,
+0x28,0x00,0xb4,0x8f,0x24,0x00,0xb3,0x8f,0x20,0x00,0xb2,0x8f,0x1c,0x00,0xb1,0x8f,
+0x18,0x00,0xb0,0x8f,0x08,0x00,0xe0,0x03,0x40,0x00,0xbd,0x27,0x02,0x80,0x03,0x3c,
+0x68,0x15,0x63,0x24,0xbe,0x42,0x62,0x90,0xc0,0x07,0x83,0x30,0x82,0x19,0x03,0x00,
+0x2b,0x10,0x62,0x00,0xe0,0xff,0x40,0x10,0x02,0x80,0x04,0x3c,0x68,0x15,0x84,0x24,
+0xbf,0x42,0x82,0x90,0x00,0x00,0x00,0x00,0x2b,0x10,0x43,0x00,0xda,0xff,0x40,0x10,
+0x00,0x12,0x03,0x00,0x10,0x00,0x03,0x3c,0x25,0x10,0x43,0x00,0x9a,0x12,0x00,0x08,
+0x21,0x90,0x42,0x02,0xe8,0xff,0xbd,0x27,0x10,0x00,0xb0,0xaf,0x0f,0x00,0x10,0x3c,
+0xff,0xff,0x05,0x36,0xf0,0xf8,0x06,0x34,0x14,0x00,0xbf,0xaf,0xba,0x44,0x00,0x0c,
+0x15,0x00,0x04,0x24,0xb3,0x0a,0x00,0x0c,0x64,0x00,0x04,0x24,0xff,0xff,0x05,0x36,
+0x56,0x30,0x06,0x24,0xba,0x44,0x00,0x0c,0x1a,0x00,0x04,0x24,0xb3,0x0a,0x00,0x0c,
+0x64,0x00,0x04,0x24,0x02,0x80,0x0b,0x3c,0x68,0x15,0x64,0x25,0x04,0x43,0x83,0x90,
+0x04,0x00,0x02,0x24,0x19,0x00,0x62,0x10,0x25,0xb0,0x02,0x3c,0x14,0x43,0x8a,0x8c,
+0x18,0x43,0x88,0x8c,0x25,0xb0,0x02,0x3c,0x1c,0x0e,0x49,0x34,0x00,0x0e,0x43,0x34,
+0x04,0x0e,0x44,0x34,0x08,0x0e,0x45,0x34,0x10,0x0e,0x46,0x34,0x14,0x0e,0x47,0x34,
+0x18,0x0e,0x42,0x34,0x00,0x00,0x6a,0xac,0x00,0x00,0x8a,0xac,0x00,0x00,0xa8,0xac,
+0x00,0x00,0xca,0xac,0x00,0x00,0xea,0xac,0x00,0x00,0x4a,0xac,0x00,0x00,0x2a,0xad,
+0x14,0x00,0xbf,0x8f,0x10,0x00,0xb0,0x8f,0x68,0x15,0x63,0x25,0x04,0x00,0x02,0x24,
+0x18,0x00,0xbd,0x27,0x08,0x00,0xe0,0x03,0x04,0x43,0x62,0xa0,0x00,0x0e,0x42,0x34,
+0x00,0x00,0x43,0x8c,0x14,0x43,0x8a,0x8c,0x00,0x00,0x00,0x00,0xe4,0xff,0x6a,0x14,
+0x00,0x00,0x00,0x00,0xec,0x12,0x00,0x08,0x00,0x00,0x00,0x00,0xe8,0xff,0xbd,0x27,
+0x10,0x00,0xb0,0xaf,0x0f,0x00,0x10,0x3c,0xff,0xff,0x05,0x36,0xf0,0xf8,0x06,0x34,
+0x14,0x00,0xbf,0xaf,0xba,0x44,0x00,0x0c,0x15,0x00,0x04,0x24,0xb3,0x0a,0x00,0x0c,
+0x64,0x00,0x04,0x24,0xff,0xff,0x05,0x36,0x56,0x30,0x06,0x24,0xba,0x44,0x00,0x0c,
+0x1a,0x00,0x04,0x24,0xb3,0x0a,0x00,0x0c,0x64,0x00,0x04,0x24,0x02,0x80,0x04,0x3c,
+0x68,0x15,0x83,0x24,0x04,0x43,0x65,0x90,0x21,0x70,0x60,0x00,0x10,0x10,0x03,0x3c,
+0x25,0xb0,0x02,0x3c,0x10,0x10,0x66,0x34,0x01,0x00,0x03,0x24,0x1c,0x0e,0x4d,0x34,
+0x00,0x0e,0x4a,0x34,0x04,0x0e,0x4b,0x34,0x08,0x0e,0x4c,0x34,0x10,0x0e,0x47,0x34,
+0x14,0x0e,0x48,0x34,0x0f,0x00,0xa3,0x10,0x18,0x0e,0x49,0x34,0x10,0x10,0x02,0x24,
+0x00,0x00,0x46,0xad,0x00,0x00,0x66,0xad,0x00,0x00,0x82,0xad,0x00,0x00,0xe6,0xac,
+0x00,0x00,0x06,0xad,0x00,0x00,0x26,0xad,0x00,0x00,0xa6,0xad,0x14,0x00,0xbf,0x8f,
+0x10,0x00,0xb0,0x8f,0x01,0x00,0x02,0x24,0x18,0x00,0xbd,0x27,0x08,0x00,0xe0,0x03,
+0x04,0x43,0xc2,0xa1,0x00,0x00,0x44,0x8d,0x00,0x00,0x00,0x00,0xf0,0xff,0x86,0x14,
+0x10,0x10,0x02,0x24,0x23,0x13,0x00,0x08,0x00,0x00,0x00,0x00,0xe0,0xff,0xbd,0x27,
+0x14,0x00,0xb1,0xaf,0x10,0x00,0xb0,0xaf,0x01,0x00,0x11,0x3c,0x0f,0x00,0x10,0x3c,
+0xff,0xff,0x05,0x36,0xf4,0x98,0x26,0x36,0x18,0x00,0xbf,0xaf,0xba,0x44,0x00,0x0c,
+0x15,0x00,0x04,0x24,0xb3,0x0a,0x00,0x0c,0x64,0x00,0x04,0x24,0xff,0xff,0x05,0x36,
+0x56,0x30,0x26,0x36,0xba,0x44,0x00,0x0c,0x1a,0x00,0x04,0x24,0x02,0x80,0x10,0x3c,
+0xb3,0x0a,0x00,0x0c,0x64,0x00,0x04,0x24,0x68,0x15,0x04,0x26,0x04,0x43,0x82,0x90,
+0x00,0x00,0x00,0x00,0x0d,0x00,0x40,0x14,0x25,0xb0,0x02,0x3c,0x00,0x0e,0x42,0x34,
+0x00,0x00,0x43,0x8c,0xec,0x42,0x8f,0x8c,0x00,0x00,0x00,0x00,0x08,0x00,0x6f,0x14,
+0x68,0x15,0x02,0x26,0x18,0x00,0xbf,0x8f,0x14,0x00,0xb1,0x8f,0x10,0x00,0xb0,0x8f,
+0x20,0x00,0xbd,0x27,0x08,0x00,0xe0,0x03,0x04,0x43,0x40,0xa0,0xec,0x42,0x8f,0x8c,
+0xe8,0x42,0x88,0x8c,0xf0,0x42,0x8a,0x8c,0xf4,0x42,0x8b,0x8c,0xf8,0x42,0x8c,0x8c,
+0xfc,0x42,0x8d,0x8c,0x25,0xb0,0x02,0x3c,0x00,0x43,0x8e,0x8c,0x1c,0x0e,0x49,0x34,
+0x08,0x0e,0x43,0x34,0x00,0x0e,0x44,0x34,0x04,0x0e,0x45,0x34,0x10,0x0e,0x46,0x34,
+0x14,0x0e,0x47,0x34,0x18,0x0e,0x42,0x34,0x00,0x00,0x68,0xac,0x18,0x00,0xbf,0x8f,
+0x00,0x00,0x8f,0xac,0x14,0x00,0xb1,0x8f,0x00,0x00,0xaa,0xac,0x00,0x00,0xcb,0xac,
+0x00,0x00,0xec,0xac,0x00,0x00,0x4d,0xac,0x68,0x15,0x02,0x26,0x10,0x00,0xb0,0x8f,
+0x20,0x00,0xbd,0x27,0x00,0x00,0x2e,0xad,0x08,0x00,0xe0,0x03,0x04,0x43,0x40,0xa0,
+0xe0,0xff,0xbd,0x27,0x14,0x00,0xb1,0xaf,0x10,0x00,0xb0,0xaf,0x01,0x00,0x11,0x3c,
+0x0f,0x00,0x10,0x3c,0xff,0xff,0x05,0x36,0xf4,0x98,0x26,0x36,0x18,0x00,0xbf,0xaf,
+0xba,0x44,0x00,0x0c,0x15,0x00,0x04,0x24,0xb3,0x0a,0x00,0x0c,0x64,0x00,0x04,0x24,
+0xff,0xff,0x05,0x36,0x56,0x30,0x26,0x36,0xba,0x44,0x00,0x0c,0x1a,0x00,0x04,0x24,
+0xb3,0x0a,0x00,0x0c,0x64,0x00,0x04,0x24,0x02,0x80,0x18,0x3c,0x68,0x15,0x05,0x27,
+0x04,0x43,0xa3,0x90,0x03,0x00,0x02,0x24,0x2a,0x00,0x62,0x10,0x25,0xb0,0x02,0x3c,
+0xec,0x42,0xaf,0x8c,0x08,0x43,0xa3,0x8c,0xe8,0x42,0xa2,0x8c,0xf0,0x42,0xac,0x8c,
+0xf4,0x42,0xad,0x8c,0xf8,0x42,0xa9,0x8c,0xfc,0x42,0xaa,0x8c,0x00,0x43,0xab,0x8c,
+0x21,0x70,0x43,0x00,0xff,0xff,0x02,0x3c,0x25,0xb0,0x03,0x3c,0xff,0x00,0x42,0x34,
+0x00,0xff,0xc4,0x31,0x04,0x0e,0x65,0x34,0x10,0x0e,0x66,0x34,0x14,0x0e,0x67,0x34,
+0x18,0x0e,0x68,0x34,0x24,0x80,0xc2,0x01,0x08,0x0e,0x71,0x34,0x00,0x0e,0x62,0x34,
+0x01,0x3f,0x84,0x2c,0x1c,0x0e,0x63,0x34,0x00,0x00,0x4f,0xac,0x00,0x00,0xac,0xac,
+0x00,0x00,0xcd,0xac,0x00,0x00,0xe9,0xac,0x00,0x00,0x0a,0xad,0x00,0x00,0x6b,0xac,
+0x0a,0x00,0x80,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x2e,0xae,0x18,0x00,0xbf,0x8f,
+0x14,0x00,0xb1,0x8f,0x10,0x00,0xb0,0x8f,0x68,0x15,0x03,0x27,0x03,0x00,0x02,0x24,
+0x20,0x00,0xbd,0x27,0x08,0x00,0xe0,0x03,0x04,0x43,0x62,0xa0,0xa6,0x13,0x00,0x08,
+0x00,0x3f,0x0e,0x36,0x00,0x0e,0x42,0x34,0x00,0x00,0x43,0x8c,0xec,0x42,0xaf,0x8c,
+0x00,0x00,0x00,0x00,0xd3,0xff,0x6f,0x14,0x00,0x00,0x00,0x00,0xa7,0x13,0x00,0x08,
+0x00,0x00,0x00,0x00,0xd0,0xff,0xbd,0x27,0x18,0x00,0xb2,0xaf,0x02,0x80,0x12,0x3c,
+0x24,0x00,0xb5,0xaf,0x20,0x00,0xb4,0xaf,0x28,0x00,0xbf,0xaf,0x1c,0x00,0xb3,0xaf,
+0x14,0x00,0xb1,0xaf,0x10,0x00,0xb0,0xaf,0x68,0x15,0x44,0x26,0x02,0x80,0x14,0x3c,
+0x00,0x40,0x85,0x8c,0xdc,0x63,0x83,0x8c,0x8e,0x7d,0x86,0x92,0x25,0xb0,0x02,0x3c,
+0x0f,0x0c,0x42,0x34,0x00,0x00,0x46,0xa0,0x02,0x19,0x03,0x00,0xf0,0xf0,0xa5,0x30,
+0x00,0x10,0x02,0x24,0x04,0x43,0x93,0x90,0x71,0x00,0xa2,0x10,0x7f,0x00,0x75,0x30,
+0x25,0xb0,0x09,0x3c,0x4c,0x00,0x23,0x35,0x00,0x00,0x62,0x90,0x00,0x00,0x00,0x00,
+0x03,0x00,0x42,0x30,0x09,0x00,0x40,0x10,0x68,0x15,0x45,0x26,0x68,0x15,0x4a,0x26,
+0x00,0x40,0x42,0x8d,0x00,0x00,0x00,0x00,0x02,0x13,0x02,0x00,0x0f,0x00,0x42,0x30,
+0x33,0x00,0x40,0x10,0x00,0x0e,0x25,0x35,0x68,0x15,0x45,0x26,0x04,0x43,0xa2,0x8c,
+0x00,0x00,0x00,0x00,0x02,0x12,0x02,0x00,0x0f,0x00,0x40,0x14,0x68,0x15,0x4a,0x26,
+0x25,0xb0,0x02,0x3c,0x84,0x01,0x42,0x34,0x00,0x00,0x44,0x8c,0x0d,0x00,0x03,0x24,
+0x7e,0x00,0x83,0x10,0x3e,0x00,0x02,0x24,0x4a,0x00,0x03,0x24,0x1f,0x43,0xa2,0xa0,
+0x1c,0x43,0xa3,0xa0,0x45,0x00,0x02,0x24,0x43,0x00,0x03,0x24,0x1d,0x43,0xa2,0xa0,
+0x1e,0x43,0xa3,0xa0,0x68,0x15,0x4a,0x26,0xdc,0x63,0x4c,0x8d,0x04,0x40,0x42,0x8d,
+0x00,0x40,0x4b,0x8d,0x1e,0x43,0x4d,0x91,0x1c,0x43,0x4e,0x91,0x25,0xb0,0x09,0x3c,
+0x02,0x11,0x02,0x00,0x60,0x0c,0x27,0x35,0x02,0x19,0x0c,0x00,0x98,0x0c,0x24,0x35,
+0x00,0x00,0xe3,0xa0,0x66,0x0c,0x25,0x35,0x00,0x00,0x82,0xa0,0x67,0x0c,0x26,0x35,
+0xf0,0xf0,0x68,0x31,0x10,0x10,0x02,0x24,0x00,0x00,0xad,0xa0,0x00,0x00,0xce,0xa0,
+0x43,0x00,0x02,0x11,0xff,0xff,0x02,0x34,0x28,0x00,0xbf,0x8f,0x24,0x00,0xb5,0x8f,
+0x20,0x00,0xb4,0x8f,0x1c,0x00,0xb3,0x8f,0x18,0x00,0xb2,0x8f,0x14,0x00,0xb1,0x8f,
+0x10,0x00,0xb0,0x8f,0x21,0x10,0x00,0x00,0x08,0x00,0xe0,0x03,0x30,0x00,0xbd,0x27,
+0x00,0x00,0xa2,0x8c,0x00,0x00,0x00,0x00,0x5d,0x00,0x40,0x10,0x10,0x0e,0x28,0x35,
+0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,
+0x08,0x0e,0x22,0x35,0x04,0x0e,0x24,0x35,0x00,0x00,0x43,0x8c,0x00,0x00,0xa5,0x8c,
+0x00,0x00,0x82,0x8c,0xe8,0x42,0x43,0xad,0xec,0x42,0x45,0xad,0xf0,0x42,0x42,0xad,
+0x14,0x0e,0x24,0x35,0x18,0x0e,0x22,0x35,0x1c,0x0e,0x25,0x35,0x00,0x00,0x08,0x8d,
+0x8e,0x7d,0x8b,0x92,0x00,0x00,0x86,0x8c,0x00,0xff,0x63,0x30,0x00,0x00,0x47,0x8c,
+0x00,0x00,0xa4,0x8c,0x9a,0x0c,0x22,0x35,0x02,0x1a,0x03,0x00,0x00,0x00,0x43,0xa0,
+0x22,0x00,0x02,0x24,0xf4,0x42,0x48,0xad,0xf8,0x42,0x46,0xad,0xfc,0x42,0x47,0xad,
+0x58,0x00,0x62,0x11,0x00,0x43,0x44,0xad,0x92,0x00,0x02,0x24,0x56,0x00,0x62,0x11,
+0x0d,0x08,0x22,0x35,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,
+0x68,0x15,0x44,0x26,0x00,0x40,0x83,0x8c,0xff,0xff,0x02,0x3c,0xff,0x0f,0x42,0x34,
+0x24,0x18,0x62,0x00,0x00,0x10,0x63,0x34,0xde,0x13,0x00,0x08,0x00,0x40,0x83,0xac,
+0x01,0x00,0x02,0x24,0x35,0x00,0x62,0x12,0x04,0x00,0x02,0x24,0x33,0x00,0x62,0x12,
+0x68,0x15,0x43,0x26,0xff,0xff,0x02,0x24,0xd0,0x13,0x00,0x08,0x04,0x43,0x62,0xa0,
+0xbd,0xff,0x82,0x11,0x02,0x12,0x0b,0x00,0x0f,0x00,0x48,0x30,0x01,0x00,0x03,0x24,
+0xb9,0xff,0x03,0x15,0x4c,0x00,0x23,0x35,0x00,0x00,0x62,0x90,0x00,0x00,0x00,0x00,
+0x03,0x00,0x42,0x30,0xb4,0xff,0x40,0x10,0x03,0x00,0x02,0x24,0x5f,0x00,0x62,0x12,
+0x04,0x00,0x62,0x2a,0x45,0x00,0x40,0x10,0x00,0x00,0x00,0x00,0x64,0x00,0x60,0x12,
+0xff,0x00,0xa2,0x31,0xac,0xff,0x68,0x16,0xff,0x00,0xc2,0x31,0x2b,0x10,0xa2,0x02,
+0x52,0x00,0x40,0x10,0x00,0x00,0x00,0x00,0x1f,0x43,0x42,0x91,0x00,0x00,0x00,0x00,
+0x2b,0x10,0x55,0x00,0x44,0x00,0x40,0x14,0x00,0x00,0x00,0x00,0x2f,0x13,0x00,0x0c,
+0x00,0x00,0x00,0x00,0x06,0x14,0x00,0x08,0x00,0x00,0x00,0x00,0x3b,0x00,0x02,0x24,
+0x46,0x00,0x03,0x24,0x1f,0x43,0xa2,0xa0,0x1c,0x43,0xa3,0xa0,0x41,0x00,0x02,0x24,
+0x40,0x00,0x03,0x24,0x1d,0x43,0xa2,0xa0,0xf1,0x13,0x00,0x08,0x1e,0x43,0xa3,0xa0,
+0x00,0x00,0x03,0x8d,0x3f,0x3f,0x02,0x3c,0x3f,0x3f,0x42,0x34,0xa0,0xff,0x62,0x14,
+0x00,0x00,0x00,0x00,0xdf,0x13,0x00,0x08,0x68,0x15,0x45,0x26,0x0f,0x00,0x10,0x3c,
+0x01,0x00,0x11,0x3c,0xff,0xff,0x05,0x36,0xf4,0x98,0x26,0x36,0xba,0x44,0x00,0x0c,
+0x15,0x00,0x04,0x24,0xb3,0x0a,0x00,0x0c,0x64,0x00,0x04,0x24,0xff,0xff,0x05,0x36,
+0x56,0x30,0x26,0x36,0xba,0x44,0x00,0x0c,0x1a,0x00,0x04,0x24,0xb3,0x0a,0x00,0x0c,
+0x64,0x00,0x04,0x24,0x68,0x15,0x43,0x26,0xff,0xff,0x02,0x24,0xd0,0x13,0x00,0x08,
+0x04,0x43,0x62,0xa0,0x0d,0x08,0x22,0x35,0x00,0x00,0x43,0x90,0x00,0x00,0x00,0x00,
+0x0f,0x00,0x63,0x30,0x08,0x00,0x62,0x2c,0x0f,0x00,0x63,0x38,0xa5,0xff,0x40,0x14,
+0x01,0x00,0x65,0x24,0x00,0x16,0x05,0x00,0x00,0x24,0x05,0x00,0x00,0x1a,0x05,0x00,
+0x25,0x10,0x44,0x00,0x25,0x10,0x43,0x00,0x25,0x10,0x45,0x00,0x25,0x18,0x65,0x00,
+0x18,0x43,0x43,0xad,0x35,0x14,0x00,0x08,0x14,0x43,0x42,0xad,0x04,0x00,0x02,0x24,
+0x0d,0x00,0x62,0x12,0xff,0x00,0x02,0x24,0x67,0xff,0x62,0x16,0xff,0x00,0xa2,0x31,
+0x2b,0x10,0xa2,0x02,0x1d,0x00,0x40,0x14,0xff,0x00,0xc2,0x31,0x2b,0x10,0xa2,0x02,
+0x0a,0x00,0x40,0x10,0x00,0x00,0x00,0x00,0xfb,0x12,0x00,0x0c,0x00,0x00,0x00,0x00,
+0x06,0x14,0x00,0x08,0x00,0x00,0x00,0x00,0x1d,0x43,0x42,0x91,0x00,0x00,0x00,0x00,
+0x2b,0x10,0x55,0x00,0xf8,0xff,0x40,0x10,0x00,0x00,0x00,0x00,0xc5,0x12,0x00,0x0c,
+0x00,0x00,0x00,0x00,0x06,0x14,0x00,0x08,0x00,0x00,0x00,0x00,0x20,0x43,0x42,0x91,
+0x00,0x00,0x00,0x00,0x2b,0x10,0xa2,0x02,0xac,0xff,0x40,0x10,0x00,0x00,0x00,0x00,
+0x70,0x13,0x00,0x0c,0x00,0x00,0x00,0x00,0x06,0x14,0x00,0x08,0x00,0x00,0x00,0x00,
+0x2b,0x10,0xa2,0x02,0xe8,0xff,0x40,0x10,0x00,0x00,0x00,0x00,0x21,0x43,0x42,0x91,
+0x00,0x00,0x00,0x00,0x2b,0x10,0x55,0x00,0xa0,0xff,0x40,0x14,0x00,0x00,0x00,0x00,
+0x70,0x13,0x00,0x0c,0x00,0x00,0x00,0x00,0x06,0x14,0x00,0x08,0x00,0x00,0x00,0x00,
+0x02,0x80,0x08,0x3c,0x68,0x15,0x05,0x25,0xdc,0x63,0xa4,0x8c,0xe6,0x42,0xa3,0x90,
+0x02,0x11,0x04,0x00,0x1f,0x00,0x60,0x14,0x7f,0x00,0x46,0x30,0x25,0xb0,0x07,0x3c,
+0x4c,0x00,0xe2,0x34,0x00,0x00,0x43,0x90,0x00,0x00,0x00,0x00,0x19,0x00,0x60,0x10,
+0x00,0x00,0x00,0x00,0xff,0xff,0x02,0x34,0x16,0x00,0x82,0x10,0x00,0x00,0x00,0x00,
+0x00,0x08,0xe3,0x34,0x00,0x00,0x62,0x90,0x00,0x00,0x00,0x00,0x01,0x00,0x42,0x30,
+0x12,0x00,0x40,0x10,0x4b,0x00,0xc2,0x2c,0x29,0x00,0x40,0x10,0x01,0x00,0x04,0x24,
+0xd8,0xff,0xc2,0x24,0x1e,0x00,0x42,0x2c,0x2f,0x00,0x40,0x10,0x23,0x00,0xc2,0x2c,
+0x68,0x15,0x04,0x25,0xd3,0x42,0x82,0x90,0x00,0x00,0x00,0x00,0x29,0x00,0x40,0x10,
+0x25,0xb0,0x02,0x3c,0x20,0x00,0x03,0x24,0x87,0x0c,0x42,0x34,0x00,0x00,0x43,0xa0,
+0xd3,0x42,0x80,0xa0,0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,0x0f,0x00,0x40,0x10,
+0x01,0x00,0x04,0x24,0xd8,0xff,0xc2,0x24,0x1e,0x00,0x42,0x2c,0x2c,0x00,0x40,0x10,
+0x23,0x00,0xc2,0x2c,0x68,0x15,0x04,0x25,0xd3,0x42,0x82,0x90,0x00,0x00,0x00,0x00,
+0x26,0x00,0x40,0x10,0x25,0xb0,0x02,0x3c,0x44,0x00,0x03,0x24,0x30,0x0c,0x42,0x34,
+0x00,0x00,0x43,0xa0,0xed,0x14,0x00,0x08,0xd3,0x42,0x80,0xa0,0xd3,0x42,0xa2,0x90,
+0x00,0x00,0x00,0x00,0xef,0xff,0x44,0x10,0x30,0x0c,0xe3,0x34,0x43,0x00,0x02,0x24,
+0xd3,0x42,0xa4,0xa0,0x00,0x00,0x62,0xa0,0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,
+0xd3,0x42,0xa2,0x90,0x00,0x00,0x00,0x00,0xd5,0xff,0x44,0x10,0x87,0x0c,0xe3,0x34,
+0x10,0x00,0x02,0x24,0xd3,0x42,0xa4,0xa0,0x00,0x00,0x62,0xa0,0x06,0x15,0x00,0x08,
+0x00,0x00,0x00,0x00,0x23,0x00,0xc2,0x2c,0xda,0xff,0x40,0x10,0x00,0x00,0x00,0x00,
+0x68,0x15,0x04,0x25,0xd3,0x42,0x82,0x90,0x02,0x00,0x03,0x24,0xd5,0xff,0x43,0x10,
+0x00,0x00,0x00,0x00,0x25,0xb0,0x02,0x3c,0x87,0x0c,0x42,0x34,0xd3,0x42,0x83,0xa0,
+0x00,0x00,0x40,0xa0,0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,0x23,0x00,0xc2,0x2c,
+0xcc,0xff,0x40,0x10,0x00,0x00,0x00,0x00,0x68,0x15,0x04,0x25,0xd3,0x42,0x82,0x90,
+0x02,0x00,0x03,0x24,0xc7,0xff,0x43,0x10,0x00,0x00,0x00,0x00,0x25,0xb0,0x02,0x3c,
+0xd3,0x42,0x83,0xa0,0x30,0x0c,0x42,0x34,0x42,0x00,0x03,0x24,0x00,0x00,0x43,0xa0,
+0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,0x02,0x80,0x02,0x3c,0x68,0x15,0x45,0x24,
+0xd5,0x42,0xa3,0x90,0x02,0x00,0x02,0x24,0x03,0x00,0x62,0x10,0x00,0x00,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,0xdc,0x63,0xa2,0x8c,0x25,0xb0,0x03,0x3c,
+0x0a,0x0a,0x68,0x34,0x02,0x11,0x02,0x00,0x7f,0x00,0x42,0x30,0x1a,0x00,0x44,0x2c,
+0x14,0x00,0x42,0x2c,0x01,0x0a,0x66,0x34,0x0b,0x00,0x40,0x14,0x2e,0x0a,0x67,0x34,
+0xf3,0xff,0x80,0x14,0x00,0x00,0x00,0x00,0xd4,0x42,0xa4,0x90,0x01,0x00,0x02,0x24,
+0x01,0x0a,0x67,0x34,0x0f,0x00,0x82,0x10,0x2e,0x0a,0x66,0x34,0xd4,0x42,0xa0,0xa0,
+0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,0x40,0x00,0x02,0x24,0x00,0x00,0xc2,0xa0,
+0x01,0x00,0x03,0x24,0xdf,0xff,0x02,0x24,0xd4,0x42,0xa3,0xa0,0x00,0x00,0xe2,0xa0,
+0x03,0x00,0x03,0x24,0x21,0x10,0x00,0x00,0x00,0x00,0x03,0xa1,0x08,0x00,0xe0,0x03,
+0x00,0x00,0x00,0x00,0x47,0x00,0x02,0x24,0x00,0x00,0xe2,0xa0,0xd3,0xff,0x03,0x24,
+0x83,0xff,0x02,0x24,0x00,0x00,0xc3,0xa0,0x00,0x00,0x02,0xa1,0x48,0x15,0x00,0x08,
+0xd4,0x42,0xa0,0xa0,0xd0,0xff,0xbd,0x27,0x1c,0x00,0xb1,0xaf,0x28,0x00,0xbf,0xaf,
+0x24,0x00,0xb3,0xaf,0x20,0x00,0xb2,0xaf,0x18,0x00,0xb0,0xaf,0xff,0xff,0x11,0x24,
+0x02,0x80,0x13,0x3c,0x41,0xb0,0x02,0x3c,0x68,0x15,0x66,0x26,0x04,0x00,0x42,0x34,
+0x00,0x00,0x47,0x8c,0x00,0x4b,0xc5,0x8c,0x02,0x80,0x03,0x3c,0x96,0x7d,0x64,0x90,
+0xfc,0x4a,0xc8,0x8c,0x02,0x80,0x02,0x3c,0xb8,0x7d,0x49,0x90,0x25,0xb0,0x0a,0x3c,
+0x25,0x90,0xa7,0x00,0xb0,0x03,0x42,0x35,0x00,0x00,0x52,0xac,0x00,0x24,0x04,0x00,
+0x00,0x00,0x48,0xac,0x84,0x02,0x43,0x35,0x8c,0x02,0x45,0x35,0x01,0x00,0x02,0x24,
+0x00,0x00,0x72,0xac,0x00,0x00,0xa4,0xac,0xb9,0x04,0x22,0x11,0x00,0x4b,0xd2,0xac,
+0x68,0x15,0x66,0x26,0xfc,0x4a,0xc2,0x8c,0x00,0x00,0x00,0x00,0x24,0x28,0x52,0x00,
+0x01,0x00,0xa3,0x30,0x09,0x00,0x60,0x10,0x04,0x00,0xa2,0x30,0x00,0x4b,0xc2,0x8c,
+0x25,0xb0,0x03,0x3c,0x01,0x00,0x04,0x24,0x01,0x00,0x42,0x38,0xb0,0x03,0x63,0x34,
+0x00,0x00,0x64,0xac,0x00,0x4b,0xc2,0xac,0x04,0x00,0xa2,0x30,0x09,0x00,0x40,0x10,
+0x08,0x00,0xa2,0x30,0x00,0x4b,0xc2,0x8c,0x25,0xb0,0x03,0x3c,0x04,0x00,0x04,0x24,
+0x04,0x00,0x42,0x38,0xb0,0x03,0x63,0x34,0x00,0x00,0x64,0xac,0x00,0x4b,0xc2,0xac,
+0x08,0x00,0xa2,0x30,0x0e,0x00,0x40,0x10,0x68,0x15,0x64,0x26,0xc9,0x64,0xc2,0x90,
+0x00,0x00,0x00,0x00,0x05,0x00,0x40,0x18,0x2a,0xb0,0x02,0x3c,0x02,0x00,0x03,0x24,
+0x01,0x00,0x42,0x34,0x00,0x00,0x43,0xa0,0xc9,0x64,0xc0,0xa0,0x00,0x4b,0xc2,0x8c,
+0x00,0x00,0x00,0x00,0x08,0x00,0x42,0x38,0x00,0x4b,0xc2,0xac,0x68,0x15,0x64,0x26,
+0xfc,0x4a,0x82,0x8c,0x00,0x00,0x00,0x00,0x24,0x10,0x52,0x00,0x10,0x00,0x42,0x30,
+0x0d,0x00,0x40,0x10,0x00,0x00,0x00,0x00,0xc9,0x64,0x82,0x90,0x00,0x00,0x00,0x00,
+0x05,0x00,0x40,0x18,0x2a,0xb0,0x02,0x3c,0x02,0x00,0x03,0x24,0x01,0x00,0x42,0x34,
+0x00,0x00,0x43,0xa0,0xc9,0x64,0x80,0xa0,0x00,0x4b,0x82,0x8c,0x00,0x00,0x00,0x00,
+0x10,0x00,0x42,0x38,0x00,0x4b,0x82,0xac,0x68,0x15,0x64,0x26,0xfc,0x4a,0x82,0x8c,
+0x00,0x00,0x00,0x00,0x24,0x10,0x52,0x00,0x20,0x00,0x42,0x30,0x0e,0x00,0x40,0x10,
+0x00,0x00,0x00,0x00,0xc9,0x64,0x82,0x90,0x00,0x00,0x00,0x00,0x05,0x00,0x40,0x18,
+0x2a,0xb0,0x02,0x3c,0x02,0x00,0x03,0x24,0x01,0x00,0x42,0x34,0x00,0x00,0x43,0xa0,
+0xc9,0x64,0x80,0xa0,0x00,0x4b,0x82,0x8c,0x00,0x00,0x00,0x00,0x20,0x00,0x42,0x38,
+0x00,0x4b,0x82,0xac,0x68,0x15,0x64,0x26,0xfc,0x4a,0x82,0x8c,0x00,0x00,0x00,0x00,
+0x24,0x10,0x52,0x00,0x40,0x00,0x42,0x30,0x0d,0x00,0x40,0x10,0x00,0x00,0x00,0x00,
+0xc9,0x64,0x82,0x90,0x00,0x00,0x00,0x00,0x05,0x00,0x40,0x18,0x2a,0xb0,0x02,0x3c,
+0x02,0x00,0x03,0x24,0x01,0x00,0x42,0x34,0x00,0x00,0x43,0xa0,0xc9,0x64,0x80,0xa0,
+0x00,0x4b,0x82,0x8c,0x00,0x00,0x00,0x00,0x40,0x00,0x42,0x38,0x00,0x4b,0x82,0xac,
+0x68,0x15,0x64,0x26,0xfc,0x4a,0x82,0x8c,0x00,0x00,0x00,0x00,0x24,0x10,0x52,0x00,
+0x80,0x00,0x42,0x30,0x0e,0x00,0x40,0x10,0x00,0x00,0x00,0x00,0xc9,0x64,0x82,0x90,
+0x00,0x00,0x00,0x00,0x05,0x00,0x40,0x18,0x2a,0xb0,0x02,0x3c,0x02,0x00,0x03,0x24,
+0x01,0x00,0x42,0x34,0x00,0x00,0x43,0xa0,0xc9,0x64,0x80,0xa0,0x00,0x4b,0x82,0x8c,
+0x00,0x00,0x00,0x00,0x80,0x00,0x42,0x38,0x00,0x4b,0x82,0xac,0x68,0x15,0x64,0x26,
+0xfc,0x4a,0x82,0x8c,0x00,0x00,0x00,0x00,0x24,0x10,0x52,0x00,0x00,0x01,0x42,0x30,
+0x0d,0x00,0x40,0x10,0x00,0x00,0x00,0x00,0xc9,0x64,0x82,0x90,0x00,0x00,0x00,0x00,
+0x05,0x00,0x40,0x18,0x2a,0xb0,0x02,0x3c,0x02,0x00,0x03,0x24,0x01,0x00,0x42,0x34,
+0x00,0x00,0x43,0xa0,0xc9,0x64,0x80,0xa0,0x00,0x4b,0x82,0x8c,0x00,0x00,0x00,0x00,
+0x00,0x01,0x42,0x38,0x00,0x4b,0x82,0xac,0x68,0x15,0x64,0x26,0xfc,0x4a,0x82,0x8c,
+0x00,0x00,0x00,0x00,0x24,0x10,0x52,0x00,0x00,0x02,0x42,0x30,0x0e,0x00,0x40,0x10,
+0x00,0x00,0x00,0x00,0xc9,0x64,0x82,0x90,0x00,0x00,0x00,0x00,0x05,0x00,0x40,0x18,
+0x2a,0xb0,0x02,0x3c,0x02,0x00,0x03,0x24,0x01,0x00,0x42,0x34,0x00,0x00,0x43,0xa0,
+0xc9,0x64,0x80,0xa0,0x00,0x4b,0x82,0x8c,0x00,0x00,0x00,0x00,0x00,0x02,0x42,0x38,
+0x00,0x4b,0x82,0xac,0x68,0x15,0x64,0x26,0xfc,0x4a,0x82,0x8c,0x00,0x00,0x00,0x00,
+0x24,0x10,0x52,0x00,0x00,0x04,0x42,0x30,0x0d,0x00,0x40,0x10,0x00,0x00,0x00,0x00,
+0xc9,0x64,0x82,0x90,0x00,0x00,0x00,0x00,0x05,0x00,0x40,0x18,0x2a,0xb0,0x02,0x3c,
+0x02,0x00,0x03,0x24,0x01,0x00,0x42,0x34,0x00,0x00,0x43,0xa0,0xc9,0x64,0x80,0xa0,
+0x00,0x4b,0x82,0x8c,0x00,0x00,0x00,0x00,0x00,0x04,0x42,0x38,0x00,0x4b,0x82,0xac,
+0x68,0x15,0x63,0x26,0xfc,0x4a,0x62,0x8c,0x00,0x00,0x00,0x00,0x24,0x10,0x52,0x00,
+0x00,0x08,0x42,0x30,0x3a,0x00,0x40,0x10,0x2a,0xb0,0x05,0x3c,0x00,0x00,0xa8,0x8c,
+0xff,0x00,0x02,0x24,0xff,0x00,0x04,0x31,0x31,0x00,0x82,0x10,0x00,0x80,0x02,0x31,
+0x08,0x04,0x40,0x14,0x00,0x80,0x02,0x3c,0x00,0xff,0x02,0x3c,0x24,0x10,0x02,0x01,
+0x05,0x00,0x40,0x14,0x00,0x00,0x00,0x00,0xc9,0x64,0x62,0x90,0x00,0x00,0x00,0x00,
+0x0b,0x00,0x40,0x18,0xff,0x00,0x02,0x24,0x08,0x64,0x62,0x90,0x20,0xb0,0x03,0x3c,
+0x00,0x12,0x02,0x00,0x21,0x10,0x43,0x00,0x0c,0x00,0x48,0x8c,0x25,0xb0,0x03,0x3c,
+0xb0,0x03,0x63,0x34,0x00,0x00,0x68,0xac,0xff,0x00,0x04,0x31,0xff,0x00,0x02,0x24,
+0x1a,0x00,0x82,0x10,0x68,0x15,0x70,0x26,0xff,0x00,0x03,0x31,0xc0,0x64,0x05,0x8e,
+0x20,0x10,0x02,0x3c,0x00,0x1a,0x03,0x00,0x21,0x18,0x62,0x00,0x21,0x30,0x60,0x00,
+0x54,0x64,0x03,0xae,0x21,0x20,0x00,0x00,0x08,0x64,0x08,0xa2,0x20,0x00,0x07,0x24,
+0x10,0x01,0x00,0x0c,0x10,0x00,0xa0,0xaf,0xfc,0x4a,0x05,0x8e,0x02,0x80,0x06,0x3c,
+0x6c,0x7e,0xc4,0x8c,0xff,0xc7,0x02,0x24,0x24,0x28,0xa2,0x00,0x25,0xb0,0x02,0x3c,
+0x04,0x00,0x84,0x34,0x80,0x03,0x42,0x34,0x41,0xb0,0x03,0x3c,0x00,0x00,0x44,0xac,
+0x00,0x00,0x65,0xac,0x6c,0x7e,0xc4,0xac,0xfc,0x4a,0x05,0xae,0x68,0x15,0x63,0x26,
+0x00,0x4b,0x62,0x8c,0x00,0x00,0x00,0x00,0x00,0x08,0x42,0x38,0x00,0x4b,0x62,0xac,
+0x68,0x15,0x65,0x26,0xfc,0x4a,0xa2,0x8c,0x00,0x00,0x00,0x00,0x24,0x10,0x52,0x00,
+0x00,0x10,0x42,0x30,0x38,0x00,0x40,0x10,0x2a,0xb0,0x02,0x3c,0x08,0x00,0x43,0x34,
+0x00,0x00,0x68,0x8c,0xff,0x00,0x02,0x24,0xff,0x00,0x04,0x31,0x2c,0x00,0x82,0x10,
+0x00,0x80,0x02,0x31,0xca,0x03,0x40,0x14,0x00,0x80,0x02,0x3c,0x00,0xff,0x02,0x3c,
+0x24,0x10,0x02,0x01,0x0b,0x00,0x40,0x10,0xff,0x00,0x02,0x24,0x10,0x64,0xa2,0x90,
+0x20,0xb0,0x03,0x3c,0x00,0x12,0x02,0x00,0x21,0x10,0x43,0x00,0x0c,0x00,0x48,0x8c,
+0x25,0xb0,0x03,0x3c,0xb0,0x03,0x63,0x34,0x00,0x00,0x68,0xac,0xff,0x00,0x04,0x31,
+0xff,0x00,0x02,0x24,0x1a,0x00,0x82,0x10,0x68,0x15,0x70,0x26,0xff,0x00,0x03,0x31,
+0xd8,0x64,0x05,0x8e,0x20,0x10,0x02,0x3c,0x00,0x1a,0x03,0x00,0x21,0x18,0x62,0x00,
+0x21,0x30,0x60,0x00,0x6c,0x64,0x03,0xae,0x01,0x00,0x04,0x24,0x10,0x64,0x08,0xa2,
+0x20,0x00,0x07,0x24,0x10,0x01,0x00,0x0c,0x10,0x00,0xa0,0xaf,0xfc,0x4a,0x05,0x8e,
+0x02,0x80,0x06,0x3c,0x6c,0x7e,0xc4,0x8c,0xff,0xc7,0x02,0x24,0x24,0x28,0xa2,0x00,
+0x25,0xb0,0x02,0x3c,0x10,0x00,0x84,0x34,0x80,0x03,0x42,0x34,0x41,0xb0,0x03,0x3c,
+0x00,0x00,0x44,0xac,0x00,0x00,0x65,0xac,0x6c,0x7e,0xc4,0xac,0xfc,0x4a,0x05,0xae,
+0x68,0x15,0x63,0x26,0x00,0x4b,0x62,0x8c,0x00,0x00,0x00,0x00,0x00,0x10,0x42,0x38,
+0x00,0x4b,0x62,0xac,0x68,0x15,0x65,0x26,0xfc,0x4a,0xa2,0x8c,0x00,0x00,0x00,0x00,
+0x24,0x10,0x52,0x00,0x00,0x20,0x42,0x30,0x37,0x00,0x40,0x10,0x2a,0xb0,0x02,0x3c,
+0x04,0x00,0x43,0x34,0x00,0x00,0x68,0x8c,0xff,0x00,0x02,0x24,0xff,0x00,0x04,0x31,
+0xab,0x03,0x82,0x10,0x00,0x80,0x02,0x31,0x90,0x03,0x40,0x14,0x00,0x80,0x02,0x3c,
+0x00,0xff,0x02,0x3c,0x24,0x10,0x02,0x01,0x0b,0x00,0x40,0x10,0xff,0x00,0x02,0x24,
+0x0c,0x64,0xa2,0x90,0x20,0xb0,0x03,0x3c,0x00,0x12,0x02,0x00,0x21,0x10,0x43,0x00,
+0x0c,0x00,0x48,0x8c,0x25,0xb0,0x03,0x3c,0xb0,0x03,0x63,0x34,0x00,0x00,0x68,0xac,
+0xff,0x00,0x04,0x31,0xff,0x00,0x02,0x24,0x1a,0x00,0x82,0x10,0xff,0x00,0x03,0x31,
+0x68,0x15,0x70,0x26,0xcc,0x64,0x05,0x8e,0x20,0x10,0x02,0x3c,0x00,0x1a,0x03,0x00,
+0x21,0x18,0x62,0x00,0x21,0x30,0x60,0x00,0x60,0x64,0x03,0xae,0x01,0x00,0x04,0x24,
+0x0c,0x64,0x08,0xa2,0x20,0x00,0x07,0x24,0x10,0x01,0x00,0x0c,0x10,0x00,0xa0,0xaf,
+0xfc,0x4a,0x05,0x8e,0x02,0x80,0x06,0x3c,0x6c,0x7e,0xc4,0x8c,0xff,0xc7,0x02,0x24,
+0x24,0x28,0xa2,0x00,0x25,0xb0,0x02,0x3c,0x20,0x00,0x84,0x34,0x80,0x03,0x42,0x34,
+0x41,0xb0,0x03,0x3c,0x00,0x00,0x44,0xac,0x00,0x00,0x65,0xac,0x6c,0x7e,0xc4,0xac,
+0xfc,0x4a,0x05,0xae,0x68,0x15,0x63,0x26,0x00,0x4b,0x62,0x8c,0x00,0x00,0x00,0x00,
+0x00,0x20,0x42,0x38,0x00,0x4b,0x62,0xac,0x68,0x15,0x65,0x26,0xfc,0x4a,0xa2,0x8c,
+0x00,0x00,0x00,0x00,0x24,0x10,0x52,0x00,0x00,0x80,0x42,0x30,0x59,0x00,0x40,0x10,
+0x2a,0xb0,0x06,0x3c,0x0c,0x00,0xc3,0x34,0x00,0x00,0x68,0x8c,0xff,0x00,0x07,0x24,
+0xff,0x00,0x04,0x31,0x78,0x03,0x87,0x10,0x00,0x80,0x02,0x31,0x24,0x00,0x40,0x14,
+0x00,0x80,0x02,0x3c,0x00,0xff,0x02,0x3c,0x24,0x10,0x02,0x01,0x22,0x00,0x40,0x10,
+0xff,0x00,0x02,0x24,0x40,0x00,0xc6,0x34,0x00,0x00,0xc2,0x90,0x00,0x00,0x00,0x00,
+0xff,0x00,0x44,0x30,0x0f,0x00,0x87,0x10,0x68,0x15,0x62,0x26,0xe8,0x63,0xa4,0xa0,
+0x00,0x00,0xc2,0x90,0xff,0x00,0x83,0x30,0xff,0x00,0x44,0x30,0x09,0x00,0x83,0x10,
+0x68,0x15,0x62,0x26,0x21,0x38,0xa0,0x00,0x21,0x28,0xc0,0x00,0x00,0x00,0xa2,0x90,
+0x21,0x18,0x80,0x00,0xfd,0xff,0x62,0x14,0xff,0x00,0x44,0x30,0xe8,0x63,0xe3,0xa0,
+0x68,0x15,0x62,0x26,0xe8,0x63,0x43,0x90,0x20,0xb0,0x02,0x3c,0x00,0x1a,0x03,0x00,
+0x21,0x18,0x62,0x00,0x0c,0x00,0x68,0x8c,0x25,0xb0,0x02,0x3c,0xb0,0x03,0x42,0x34,
+0xff,0x00,0x04,0x31,0x00,0x00,0x48,0xac,0x16,0x17,0x00,0x08,0xff,0x00,0x02,0x24,
+0x00,0x00,0x62,0xac,0xff,0x00,0x02,0x24,0x24,0x00,0x82,0x10,0x68,0x15,0x70,0x26,
+0xff,0x00,0x03,0x31,0x90,0x64,0x05,0x8e,0x20,0x10,0x02,0x3c,0x00,0x1a,0x03,0x00,
+0x21,0x18,0x62,0x00,0x21,0x30,0x60,0x00,0xe8,0x63,0x08,0xa2,0x24,0x64,0x03,0xae,
+0x03,0x00,0x04,0x24,0x20,0x00,0x07,0x24,0x10,0x01,0x00,0x0c,0x10,0x00,0xa0,0xaf,
+0x02,0x80,0x0a,0x3c,0x7c,0x7e,0x47,0x91,0x02,0x80,0x09,0x3c,0x6c,0x7e,0x25,0x8d,
+0xfc,0x4a,0x06,0x8e,0x01,0x00,0x08,0x3c,0x80,0xff,0x02,0x24,0x25,0x38,0xe2,0x00,
+0x00,0x80,0x03,0x35,0x80,0x00,0xa5,0x34,0x27,0x18,0x03,0x00,0x00,0x26,0x07,0x00,
+0x25,0xb0,0x02,0x3c,0x24,0x30,0xc3,0x00,0x25,0x20,0x85,0x00,0x80,0x03,0x42,0x34,
+0x41,0xb0,0x03,0x3c,0x00,0x00,0x44,0xac,0x27,0x88,0x08,0x00,0x00,0x00,0x66,0xac,
+0x6c,0x7e,0x25,0xad,0x7c,0x7e,0x47,0xa1,0xfc,0x4a,0x06,0xae,0x68,0x15,0x63,0x26,
+0x00,0x4b,0x62,0x8c,0x00,0x00,0x00,0x00,0x00,0x80,0x42,0x38,0x00,0x4b,0x62,0xac,
+0x68,0x15,0x65,0x26,0xfc,0x4a,0xa2,0x8c,0x01,0x00,0x03,0x3c,0x24,0x10,0x52,0x00,
+0x24,0x10,0x51,0x00,0x24,0x10,0x43,0x00,0x56,0x00,0x40,0x10,0x2a,0xb0,0x06,0x3c,
+0x10,0x00,0xc3,0x34,0x00,0x00,0x68,0x8c,0xff,0x00,0x07,0x24,0xff,0x00,0x04,0x31,
+0x23,0x03,0x87,0x10,0x25,0xb0,0x02,0x3c,0x00,0x80,0x02,0x31,0x23,0x00,0x40,0x14,
+0x00,0x80,0x02,0x3c,0x00,0xff,0x02,0x3c,0x24,0x10,0x02,0x01,0x21,0x00,0x40,0x10,
+0xff,0x00,0x02,0x24,0x41,0x00,0xc6,0x34,0x00,0x00,0xc2,0x90,0x00,0x00,0x00,0x00,
+0xff,0x00,0x44,0x30,0x0e,0x00,0x87,0x10,0x68,0x15,0x62,0x26,0xec,0x63,0xa4,0xa0,
+0x00,0x00,0xc2,0x90,0xff,0x00,0x83,0x30,0xff,0x00,0x44,0x30,0x07,0x00,0x83,0x10,
+0x21,0x38,0xa0,0x00,0x21,0x28,0xc0,0x00,0x00,0x00,0xa2,0x90,0x21,0x18,0x80,0x00,
+0xfd,0xff,0x62,0x14,0xff,0x00,0x44,0x30,0xec,0x63,0xe3,0xa0,0x68,0x15,0x62,0x26,
+0xec,0x63,0x43,0x90,0x20,0xb0,0x02,0x3c,0x00,0x1a,0x03,0x00,0x21,0x18,0x62,0x00,
+0x0c,0x00,0x68,0x8c,0x25,0xb0,0x02,0x3c,0xb0,0x03,0x42,0x34,0xff,0x00,0x04,0x31,
+0x00,0x00,0x48,0xac,0x75,0x17,0x00,0x08,0xff,0x00,0x02,0x24,0x00,0x00,0x62,0xac,
+0xff,0x00,0x02,0x24,0x22,0x00,0x82,0x10,0x68,0x15,0x70,0x26,0xff,0x00,0x03,0x31,
+0x90,0x64,0x05,0x8e,0x20,0x10,0x02,0x3c,0x00,0x1a,0x03,0x00,0x21,0x18,0x62,0x00,
+0x21,0x30,0x60,0x00,0xec,0x63,0x08,0xa2,0x24,0x64,0x03,0xae,0x03,0x00,0x04,0x24,
+0x20,0x00,0x07,0x24,0x10,0x01,0x00,0x0c,0x10,0x00,0xa0,0xaf,0x02,0x80,0x09,0x3c,
+0x7c,0x7e,0x27,0x91,0x02,0x80,0x08,0x3c,0x6c,0x7e,0x05,0x8d,0xfc,0x4a,0x06,0x8e,
+0x01,0x00,0x02,0x3c,0x00,0x80,0x42,0x34,0x40,0x00,0xe7,0x34,0x27,0x10,0x02,0x00,
+0x24,0x30,0xc2,0x00,0x80,0x00,0xa5,0x34,0x00,0x26,0x07,0x00,0x25,0xb0,0x02,0x3c,
+0x25,0x20,0x85,0x00,0x80,0x03,0x42,0x34,0x41,0xb0,0x03,0x3c,0x00,0x00,0x44,0xac,
+0x00,0x00,0x66,0xac,0x6c,0x7e,0x05,0xad,0x7c,0x7e,0x27,0xa1,0xfc,0x4a,0x06,0xae,
+0x68,0x15,0x62,0x26,0x00,0x4b,0x43,0x8c,0x01,0x00,0x04,0x3c,0x26,0x18,0x64,0x00,
+0x00,0x4b,0x43,0xac,0x68,0x15,0x65,0x26,0xfc,0x4a,0xa2,0x8c,0x02,0x00,0x03,0x3c,
+0x24,0x10,0x52,0x00,0x24,0x10,0x43,0x00,0x5a,0x00,0x40,0x10,0x2a,0xb0,0x06,0x3c,
+0x14,0x00,0xc3,0x34,0x00,0x00,0x68,0x8c,0xff,0x00,0x07,0x24,0xff,0x00,0x04,0x31,
+0xcc,0x02,0x87,0x10,0x25,0xb0,0x02,0x3c,0x00,0x80,0x02,0x31,0x23,0x00,0x40,0x14,
+0x00,0x80,0x02,0x3c,0x00,0xff,0x02,0x3c,0x24,0x10,0x02,0x01,0x21,0x00,0x40,0x10,
+0xff,0x00,0x02,0x24,0x42,0x00,0xc6,0x34,0x00,0x00,0xc2,0x90,0x00,0x00,0x00,0x00,
+0xff,0x00,0x44,0x30,0x0e,0x00,0x87,0x10,0x68,0x15,0x62,0x26,0xf0,0x63,0xa4,0xa0,
+0x00,0x00,0xc2,0x90,0xff,0x00,0x83,0x30,0xff,0x00,0x44,0x30,0x07,0x00,0x83,0x10,
+0x21,0x38,0xa0,0x00,0x21,0x28,0xc0,0x00,0x00,0x00,0xa2,0x90,0x21,0x18,0x80,0x00,
+0xfd,0xff,0x62,0x14,0xff,0x00,0x44,0x30,0xf0,0x63,0xe3,0xa0,0x68,0x15,0x62,0x26,
+0xf0,0x63,0x43,0x90,0x20,0xb0,0x02,0x3c,0x00,0x1a,0x03,0x00,0x21,0x18,0x62,0x00,
+0x0c,0x00,0x68,0x8c,0x25,0xb0,0x02,0x3c,0xb0,0x03,0x42,0x34,0xff,0x00,0x04,0x31,
+0x00,0x00,0x48,0xac,0xd1,0x17,0x00,0x08,0xff,0x00,0x02,0x24,0x00,0x00,0x62,0xac,
+0xff,0x00,0x02,0x24,0x25,0x00,0x82,0x10,0x68,0x15,0x70,0x26,0xff,0x00,0x03,0x31,
+0x9c,0x64,0x05,0x8e,0x20,0x10,0x02,0x3c,0x00,0x1a,0x03,0x00,0x21,0x18,0x62,0x00,
+0x21,0x30,0x60,0x00,0xf0,0x63,0x08,0xa2,0x30,0x64,0x03,0xae,0x04,0x00,0x04,0x24,
+0x20,0x00,0x07,0x24,0x10,0x01,0x00,0x0c,0x10,0x00,0xa0,0xaf,0x02,0x80,0x0a,0x3c,
+0x7c,0x7e,0x47,0x91,0x02,0x80,0x09,0x3c,0x6c,0x7e,0x25,0x8d,0xfc,0x4a,0x06,0x8e,
+0x06,0x00,0x02,0x3c,0x20,0x00,0xe7,0x34,0x27,0x10,0x02,0x00,0x24,0x30,0xc2,0x00,
+0x00,0x01,0xa5,0x34,0x25,0xb0,0x03,0x3c,0x04,0x00,0x02,0x3c,0x00,0x26,0x07,0x00,
+0x26,0x88,0x22,0x02,0xb0,0x03,0x68,0x34,0x25,0x20,0x85,0x00,0x80,0x03,0x63,0x34,
+0x41,0xb0,0x02,0x3c,0x00,0x00,0x64,0xac,0x00,0x00,0x46,0xac,0x6c,0x7e,0x25,0xad,
+0x7c,0x7e,0x47,0xa1,0xfc,0x4a,0x06,0xae,0x00,0x00,0x11,0xad,0x68,0x15,0x62,0x26,
+0x00,0x4b,0x43,0x8c,0x02,0x00,0x04,0x3c,0x26,0x18,0x64,0x00,0x00,0x4b,0x43,0xac,
+0x68,0x15,0x65,0x26,0xfc,0x4a,0xa2,0x8c,0x04,0x00,0x03,0x3c,0x24,0x10,0x52,0x00,
+0x24,0x10,0x51,0x00,0x24,0x10,0x43,0x00,0x58,0x00,0x40,0x10,0x25,0xb0,0x03,0x3c,
+0xb0,0x03,0x62,0x34,0x2a,0xb0,0x09,0x3c,0x00,0x00,0x51,0xac,0x18,0x00,0x26,0x35,
+0x00,0x00,0xc8,0x8c,0xff,0x00,0x07,0x24,0xff,0x00,0x04,0x31,0x3a,0x02,0x87,0x10,
+0x04,0x00,0x02,0x24,0x00,0x80,0x02,0x31,0x23,0x00,0x40,0x14,0x00,0x80,0x02,0x3c,
+0x00,0xff,0x02,0x3c,0x24,0x10,0x02,0x01,0x21,0x00,0x40,0x10,0xff,0x00,0x02,0x24,
+0x43,0x00,0x26,0x35,0x00,0x00,0xc2,0x90,0x00,0x00,0x00,0x00,0xff,0x00,0x44,0x30,
+0x0e,0x00,0x87,0x10,0x68,0x15,0x62,0x26,0xf4,0x63,0xa4,0xa0,0x00,0x00,0xc2,0x90,
+0xff,0x00,0x83,0x30,0xff,0x00,0x44,0x30,0x07,0x00,0x83,0x10,0x21,0x38,0xa0,0x00,
+0x21,0x28,0xc0,0x00,0x00,0x00,0xa2,0x90,0x21,0x18,0x80,0x00,0xfd,0xff,0x62,0x14,
+0xff,0x00,0x44,0x30,0xf4,0x63,0xe3,0xa0,0x68,0x15,0x62,0x26,0xf4,0x63,0x43,0x90,
+0x20,0xb0,0x02,0x3c,0x00,0x1a,0x03,0x00,0x21,0x18,0x62,0x00,0x0c,0x00,0x68,0x8c,
+0x25,0xb0,0x02,0x3c,0xb0,0x03,0x42,0x34,0xff,0x00,0x04,0x31,0x00,0x00,0x48,0xac,
+0x34,0x18,0x00,0x08,0xff,0x00,0x02,0x24,0x00,0x00,0xc2,0xac,0xff,0x00,0x02,0x24,
+0x21,0x00,0x82,0x10,0x68,0x15,0x70,0x26,0xff,0x00,0x03,0x31,0x9c,0x64,0x05,0x8e,
+0x20,0x10,0x02,0x3c,0x00,0x1a,0x03,0x00,0x21,0x18,0x62,0x00,0x21,0x30,0x60,0x00,
+0xf4,0x63,0x08,0xa2,0x30,0x64,0x03,0xae,0x04,0x00,0x04,0x24,0x20,0x00,0x07,0x24,
+0x10,0x01,0x00,0x0c,0x10,0x00,0xa0,0xaf,0x02,0x80,0x09,0x3c,0x7c,0x7e,0x27,0x91,
+0x02,0x80,0x08,0x3c,0x6c,0x7e,0x05,0x8d,0xfc,0x4a,0x06,0x8e,0x06,0x00,0x02,0x3c,
+0x10,0x00,0xe7,0x34,0x27,0x10,0x02,0x00,0x24,0x30,0xc2,0x00,0x00,0x01,0xa5,0x34,
+0x00,0x26,0x07,0x00,0x25,0xb0,0x02,0x3c,0x25,0x20,0x85,0x00,0x80,0x03,0x42,0x34,
+0x41,0xb0,0x03,0x3c,0x00,0x00,0x44,0xac,0x00,0x00,0x66,0xac,0x6c,0x7e,0x05,0xad,
+0x7c,0x7e,0x27,0xa1,0xfc,0x4a,0x06,0xae,0x68,0x15,0x62,0x26,0x00,0x4b,0x43,0x8c,
+0x04,0x00,0x04,0x3c,0x26,0x18,0x64,0x00,0x00,0x4b,0x43,0xac,0x68,0x15,0x65,0x26,
+0xfc,0x4a,0xa2,0x8c,0x08,0x00,0x03,0x3c,0x24,0x10,0x52,0x00,0x24,0x10,0x43,0x00,
+0x5a,0x00,0x40,0x10,0x2a,0xb0,0x06,0x3c,0x1c,0x00,0xc3,0x34,0x00,0x00,0x68,0x8c,
+0xff,0x00,0x07,0x24,0xff,0x00,0x04,0x31,0x13,0x02,0x87,0x10,0x25,0xb0,0x02,0x3c,
+0x00,0x80,0x02,0x31,0x23,0x00,0x40,0x14,0x00,0x80,0x02,0x3c,0x00,0xff,0x02,0x3c,
+0x24,0x10,0x02,0x01,0x21,0x00,0x40,0x10,0xff,0x00,0x02,0x24,0x44,0x00,0xc6,0x34,
+0x00,0x00,0xc2,0x90,0x00,0x00,0x00,0x00,0xff,0x00,0x44,0x30,0x0e,0x00,0x87,0x10,
+0x68,0x15,0x62,0x26,0xf8,0x63,0xa4,0xa0,0x00,0x00,0xc2,0x90,0xff,0x00,0x83,0x30,
+0xff,0x00,0x44,0x30,0x07,0x00,0x83,0x10,0x21,0x38,0xa0,0x00,0x21,0x28,0xc0,0x00,
+0x00,0x00,0xa2,0x90,0x21,0x18,0x80,0x00,0xfd,0xff,0x62,0x14,0xff,0x00,0x44,0x30,
+0xf8,0x63,0xe3,0xa0,0x68,0x15,0x62,0x26,0xf8,0x63,0x43,0x90,0x20,0xb0,0x02,0x3c,
+0x00,0x1a,0x03,0x00,0x21,0x18,0x62,0x00,0x0c,0x00,0x68,0x8c,0x25,0xb0,0x02,0x3c,
+0xb0,0x03,0x42,0x34,0xff,0x00,0x04,0x31,0x00,0x00,0x48,0xac,0x8f,0x18,0x00,0x08,
+0xff,0x00,0x02,0x24,0x00,0x00,0x62,0xac,0xff,0x00,0x02,0x24,0x25,0x00,0x82,0x10,
+0x68,0x15,0x70,0x26,0xff,0x00,0x03,0x31,0xa8,0x64,0x05,0x8e,0x20,0x10,0x02,0x3c,
+0x00,0x1a,0x03,0x00,0x21,0x18,0x62,0x00,0x21,0x30,0x60,0x00,0xf8,0x63,0x08,0xa2,
+0x3c,0x64,0x03,0xae,0x05,0x00,0x04,0x24,0x20,0x00,0x07,0x24,0x10,0x01,0x00,0x0c,
+0x10,0x00,0xa0,0xaf,0x02,0x80,0x0a,0x3c,0x7c,0x7e,0x47,0x91,0x02,0x80,0x09,0x3c,
+0x6c,0x7e,0x25,0x8d,0xfc,0x4a,0x06,0x8e,0x18,0x00,0x02,0x3c,0x08,0x00,0xe7,0x34,
+0x27,0x10,0x02,0x00,0x24,0x30,0xc2,0x00,0x00,0x02,0xa5,0x34,0x25,0xb0,0x03,0x3c,
+0x10,0x00,0x02,0x3c,0x00,0x26,0x07,0x00,0x26,0x88,0x22,0x02,0xb0,0x03,0x68,0x34,
+0x25,0x20,0x85,0x00,0x80,0x03,0x63,0x34,0x41,0xb0,0x02,0x3c,0x00,0x00,0x64,0xac,
+0x00,0x00,0x46,0xac,0x6c,0x7e,0x25,0xad,0x7c,0x7e,0x47,0xa1,0xfc,0x4a,0x06,0xae,
+0x00,0x00,0x11,0xad,0x68,0x15,0x62,0x26,0x00,0x4b,0x43,0x8c,0x08,0x00,0x04,0x3c,
+0x26,0x18,0x64,0x00,0x00,0x4b,0x43,0xac,0x68,0x15,0x65,0x26,0xfc,0x4a,0xa2,0x8c,
+0x10,0x00,0x03,0x3c,0x24,0x10,0x52,0x00,0x24,0x10,0x51,0x00,0x24,0x10,0x43,0x00,
+0x58,0x00,0x40,0x10,0x25,0xb0,0x06,0x3c,0xb0,0x03,0xc2,0x34,0x2a,0xb0,0x09,0x3c,
+0x00,0x00,0x51,0xac,0x20,0x00,0x23,0x35,0x00,0x00,0x68,0x8c,0xff,0x00,0x07,0x24,
+0xff,0x00,0x04,0x31,0x80,0x01,0x87,0x10,0x90,0x03,0xc2,0x34,0x00,0x80,0x02,0x31,
+0x23,0x00,0x40,0x14,0x00,0x80,0x02,0x3c,0x00,0xff,0x02,0x3c,0x24,0x10,0x02,0x01,
+0x21,0x00,0x40,0x10,0xff,0x00,0x02,0x24,0x45,0x00,0x26,0x35,0x00,0x00,0xc2,0x90,
+0x00,0x00,0x00,0x00,0xff,0x00,0x44,0x30,0x0e,0x00,0x87,0x10,0x68,0x15,0x62,0x26,
+0x04,0x64,0xa4,0xa0,0x00,0x00,0xc2,0x90,0xff,0x00,0x83,0x30,0xff,0x00,0x44,0x30,
+0x07,0x00,0x83,0x10,0x21,0x38,0xa0,0x00,0x21,0x28,0xc0,0x00,0x00,0x00,0xa2,0x90,
+0x21,0x18,0x80,0x00,0xfd,0xff,0x62,0x14,0xff,0x00,0x44,0x30,0x04,0x64,0xe3,0xa0,
+0x68,0x15,0x62,0x26,0x04,0x64,0x43,0x90,0x20,0xb0,0x02,0x3c,0x00,0x1a,0x03,0x00,
+0x21,0x18,0x62,0x00,0x0c,0x00,0x68,0x8c,0x25,0xb0,0x02,0x3c,0xb0,0x03,0x42,0x34,
+0xff,0x00,0x04,0x31,0x00,0x00,0x48,0xac,0xf2,0x18,0x00,0x08,0xff,0x00,0x02,0x24,
+0x00,0x00,0x62,0xac,0xff,0x00,0x02,0x24,0x21,0x00,0x82,0x10,0x68,0x15,0x70,0x26,
+0xff,0x00,0x03,0x31,0xa8,0x64,0x05,0x8e,0x20,0x10,0x02,0x3c,0x00,0x1a,0x03,0x00,
+0x21,0x18,0x62,0x00,0x21,0x30,0x60,0x00,0x04,0x64,0x08,0xa2,0x3c,0x64,0x03,0xae,
+0x05,0x00,0x04,0x24,0x20,0x00,0x07,0x24,0x10,0x01,0x00,0x0c,0x10,0x00,0xa0,0xaf,
+0x02,0x80,0x09,0x3c,0x7c,0x7e,0x27,0x91,0x02,0x80,0x08,0x3c,0x6c,0x7e,0x05,0x8d,
+0xfc,0x4a,0x06,0x8e,0x18,0x00,0x02,0x3c,0x01,0x00,0xe7,0x34,0x27,0x10,0x02,0x00,
+0x24,0x30,0xc2,0x00,0x00,0x02,0xa5,0x34,0x00,0x26,0x07,0x00,0x25,0xb0,0x02,0x3c,
+0x25,0x20,0x85,0x00,0x80,0x03,0x42,0x34,0x41,0xb0,0x03,0x3c,0x00,0x00,0x44,0xac,
+0x00,0x00,0x66,0xac,0x6c,0x7e,0x05,0xad,0x7c,0x7e,0x27,0xa1,0xfc,0x4a,0x06,0xae,
+0x68,0x15,0x62,0x26,0x00,0x4b,0x43,0x8c,0x10,0x00,0x04,0x3c,0x26,0x18,0x64,0x00,
+0x00,0x4b,0x43,0xac,0x68,0x15,0x65,0x26,0xfc,0x4a,0xa2,0x8c,0x20,0x00,0x03,0x3c,
+0x24,0x10,0x52,0x00,0x24,0x10,0x43,0x00,0x5a,0x00,0x40,0x10,0x2a,0xb0,0x06,0x3c,
+0x24,0x00,0xc3,0x34,0x00,0x00,0x68,0x8c,0xff,0x00,0x07,0x24,0xff,0x00,0x04,0x31,
+0x28,0x01,0x87,0x10,0x25,0xb0,0x02,0x3c,0x00,0x80,0x02,0x31,0x23,0x00,0x40,0x14,
+0x00,0x80,0x02,0x3c,0x00,0xff,0x02,0x3c,0x24,0x10,0x02,0x01,0x21,0x00,0x40,0x10,
+0xff,0x00,0x02,0x24,0x46,0x00,0xc6,0x34,0x00,0x00,0xc2,0x90,0x00,0x00,0x00,0x00,
+0xff,0x00,0x44,0x30,0x0e,0x00,0x87,0x10,0x68,0x15,0x62,0x26,0xfc,0x63,0xa4,0xa0,
+0x00,0x00,0xc2,0x90,0xff,0x00,0x83,0x30,0xff,0x00,0x44,0x30,0x07,0x00,0x83,0x10,
+0x21,0x38,0xa0,0x00,0x21,0x28,0xc0,0x00,0x00,0x00,0xa2,0x90,0x21,0x18,0x80,0x00,
+0xfd,0xff,0x62,0x14,0xff,0x00,0x44,0x30,0xfc,0x63,0xe3,0xa0,0x68,0x15,0x62,0x26,
+0xfc,0x63,0x43,0x90,0x20,0xb0,0x02,0x3c,0x00,0x1a,0x03,0x00,0x21,0x18,0x62,0x00,
+0x0c,0x00,0x68,0x8c,0x25,0xb0,0x02,0x3c,0xb0,0x03,0x42,0x34,0xff,0x00,0x04,0x31,
+0x00,0x00,0x48,0xac,0x4d,0x19,0x00,0x08,0xff,0x00,0x02,0x24,0x00,0x00,0x62,0xac,
+0xff,0x00,0x02,0x24,0x25,0x00,0x82,0x10,0x68,0x15,0x70,0x26,0xff,0x00,0x03,0x31,
+0xb4,0x64,0x05,0x8e,0x20,0x10,0x02,0x3c,0x00,0x1a,0x03,0x00,0x21,0x18,0x62,0x00,
+0x21,0x30,0x60,0x00,0xfc,0x63,0x08,0xa2,0x48,0x64,0x03,0xae,0x06,0x00,0x04,0x24,
+0x20,0x00,0x07,0x24,0x10,0x01,0x00,0x0c,0x10,0x00,0xa0,0xaf,0x02,0x80,0x0a,0x3c,
+0x7c,0x7e,0x47,0x91,0x02,0x80,0x09,0x3c,0x6c,0x7e,0x25,0x8d,0xfc,0x4a,0x06,0x8e,
+0x60,0x00,0x02,0x3c,0x04,0x00,0xe7,0x34,0x27,0x10,0x02,0x00,0x24,0x30,0xc2,0x00,
+0x00,0x04,0xa5,0x34,0x25,0xb0,0x03,0x3c,0x40,0x00,0x02,0x3c,0x00,0x26,0x07,0x00,
+0x26,0x88,0x22,0x02,0xb0,0x03,0x68,0x34,0x25,0x20,0x85,0x00,0x80,0x03,0x63,0x34,
+0x41,0xb0,0x02,0x3c,0x00,0x00,0x64,0xac,0x00,0x00,0x46,0xac,0x6c,0x7e,0x25,0xad,
+0x7c,0x7e,0x47,0xa1,0xfc,0x4a,0x06,0xae,0x00,0x00,0x11,0xad,0x68,0x15,0x62,0x26,
+0x00,0x4b,0x43,0x8c,0x20,0x00,0x04,0x3c,0x26,0x18,0x64,0x00,0x00,0x4b,0x43,0xac,
+0x68,0x15,0x65,0x26,0xfc,0x4a,0xa2,0x8c,0x40,0x00,0x03,0x3c,0x24,0x10,0x52,0x00,
+0x24,0x10,0x51,0x00,0x24,0x10,0x43,0x00,0x5a,0x00,0x40,0x10,0x68,0x15,0x70,0x26,
+0x25,0xb0,0x02,0x3c,0x2a,0xb0,0x07,0x3c,0xb0,0x03,0x42,0x34,0x00,0x00,0x51,0xac,
+0x28,0x00,0xe3,0x34,0x00,0x00,0x68,0x8c,0xff,0x00,0x06,0x24,0xff,0x00,0x04,0x31,
+0xc9,0x00,0x86,0x10,0x25,0xbd,0x02,0x3c,0x00,0x80,0x02,0x31,0x23,0x00,0x40,0x14,
+0x00,0x80,0x02,0x3c,0x00,0xff,0x02,0x3c,0x24,0x10,0x02,0x01,0x21,0x00,0x40,0x10,
+0xff,0x00,0x02,0x24,0x47,0x00,0xe7,0x34,0x00,0x00,0xe2,0x90,0x00,0x00,0x00,0x00,
+0xff,0x00,0x44,0x30,0x0e,0x00,0x86,0x10,0x68,0x15,0x62,0x26,0x00,0x64,0xa4,0xa0,
+0x00,0x00,0xe2,0x90,0xff,0x00,0x83,0x30,0xff,0x00,0x44,0x30,0x07,0x00,0x83,0x10,
+0x21,0x30,0xa0,0x00,0x21,0x28,0xe0,0x00,0x00,0x00,0xa2,0x90,0x21,0x18,0x80,0x00,
+0xfd,0xff,0x62,0x14,0xff,0x00,0x44,0x30,0x00,0x64,0xc3,0xa0,0x68,0x15,0x62,0x26,
+0x00,0x64,0x43,0x90,0x20,0xb0,0x02,0x3c,0x00,0x1a,0x03,0x00,0x21,0x18,0x62,0x00,
+0x0c,0x00,0x68,0x8c,0x25,0xb0,0x02,0x3c,0xb0,0x03,0x42,0x34,0xff,0x00,0x04,0x31,
+0x00,0x00,0x48,0xac,0xb1,0x19,0x00,0x08,0xff,0x00,0x02,0x24,0x00,0x00,0x62,0xac,
+0xff,0x00,0x02,0x24,0x21,0x00,0x82,0x10,0x68,0x15,0x70,0x26,0xff,0x00,0x03,0x31,
+0xb4,0x64,0x05,0x8e,0x20,0x10,0x02,0x3c,0x00,0x1a,0x03,0x00,0x21,0x18,0x62,0x00,
+0x21,0x30,0x60,0x00,0x00,0x64,0x08,0xa2,0x48,0x64,0x03,0xae,0x06,0x00,0x04,0x24,
+0x20,0x00,0x07,0x24,0x10,0x01,0x00,0x0c,0x10,0x00,0xa0,0xaf,0x02,0x80,0x09,0x3c,
+0x7c,0x7e,0x27,0x91,0x02,0x80,0x08,0x3c,0x6c,0x7e,0x05,0x8d,0xfc,0x4a,0x06,0x8e,
+0x60,0x00,0x02,0x3c,0x02,0x00,0xe7,0x34,0x27,0x10,0x02,0x00,0x24,0x30,0xc2,0x00,
+0x00,0x04,0xa5,0x34,0x00,0x26,0x07,0x00,0x25,0xb0,0x02,0x3c,0x25,0x20,0x85,0x00,
+0x80,0x03,0x42,0x34,0x41,0xb0,0x03,0x3c,0x00,0x00,0x44,0xac,0x00,0x00,0x66,0xac,
+0x6c,0x7e,0x05,0xad,0x7c,0x7e,0x27,0xa1,0xfc,0x4a,0x06,0xae,0x68,0x15,0x62,0x26,
+0x00,0x4b,0x43,0x8c,0x40,0x00,0x04,0x3c,0x26,0x18,0x64,0x00,0x00,0x4b,0x43,0xac,
+0x68,0x15,0x70,0x26,0xfc,0x4a,0x06,0x8e,0x00,0x04,0x11,0x3c,0x24,0x10,0xd2,0x00,
+0x24,0x10,0x51,0x00,0x4c,0x00,0x40,0x14,0x00,0x00,0x00,0x00,0x24,0x28,0xd2,0x00,
+0x00,0x08,0x04,0x3c,0x24,0x10,0xa4,0x00,0x08,0x00,0x40,0x10,0x80,0x00,0x07,0x3c,
+0x00,0x4b,0x03,0x8e,0x25,0xb0,0x02,0x3c,0xb0,0x03,0x42,0x34,0x26,0x18,0x64,0x00,
+0x00,0x00,0x44,0xac,0x00,0x4b,0x03,0xae,0x80,0x00,0x07,0x3c,0x24,0x10,0xa7,0x00,
+0x21,0x00,0x40,0x10,0x00,0x00,0x00,0x00,0x00,0x4b,0x03,0x8e,0x25,0xb0,0x08,0x3c,
+0xb0,0x03,0x09,0x35,0x2a,0xb0,0x02,0x3c,0x00,0x00,0x23,0xad,0x36,0x00,0x42,0x34,
+0x00,0x00,0x43,0x90,0x23,0xb0,0x04,0x3c,0xff,0x1f,0x02,0x3c,0xc0,0x18,0x03,0x00,
+0xf0,0x07,0x63,0x30,0x5c,0x65,0x05,0x8e,0x21,0x18,0x64,0x00,0xff,0xff,0x42,0x34,
+0x24,0x18,0x62,0x00,0x59,0x00,0x65,0x10,0x60,0x65,0x03,0xae,0x02,0x80,0x05,0x3c,
+0x6c,0x7e,0xa3,0x8c,0x27,0x20,0x07,0x00,0x24,0x20,0xc4,0x00,0x00,0x08,0x63,0x34,
+0x41,0xb0,0x02,0x3c,0x00,0x00,0x23,0xad,0x00,0x00,0x44,0xac,0x6c,0x7e,0xa3,0xac,
+0xfc,0x4a,0x04,0xae,0x68,0x15,0x62,0x26,0x00,0x4b,0x43,0x8c,0x80,0x00,0x04,0x3c,
+0x26,0x18,0x64,0x00,0x00,0x4b,0x43,0xac,0x68,0x15,0x66,0x26,0xfc,0x4a,0xc3,0x8c,
+0x00,0x01,0x04,0x3c,0x24,0x28,0x72,0x00,0x24,0x10,0xa4,0x00,0x06,0x00,0x40,0x10,
+0x25,0xb0,0x02,0x3c,0x00,0x4b,0xc3,0x8c,0xb0,0x03,0x42,0x34,0x26,0x18,0x64,0x00,
+0x00,0x00,0x44,0xac,0x00,0x4b,0xc3,0xac,0x00,0x02,0x04,0x3c,0x24,0x10,0xa4,0x00,
+0x06,0x00,0x40,0x10,0x25,0xb0,0x03,0x3c,0x00,0x4b,0xc2,0x8c,0xb0,0x03,0x63,0x34,
+0x26,0x10,0x44,0x00,0x00,0x4b,0xc2,0xac,0x00,0x00,0x64,0xac,0x28,0x00,0xbf,0x8f,
+0x24,0x00,0xb3,0x8f,0x20,0x00,0xb2,0x8f,0x1c,0x00,0xb1,0x8f,0x18,0x00,0xb0,0x8f,
+0x08,0x00,0xe0,0x03,0x30,0x00,0xbd,0x27,0x5b,0x4e,0x00,0x0c,0x07,0x00,0x04,0x24,
+0x00,0x4b,0x03,0x8e,0xfc,0x4a,0x06,0x8e,0x25,0xb0,0x02,0x3c,0x26,0x18,0x71,0x00,
+0xb0,0x03,0x42,0x34,0x00,0x00,0x43,0xac,0xdf,0x19,0x00,0x08,0x00,0x4b,0x03,0xae,
+0x56,0x01,0x42,0x35,0x00,0x00,0x43,0x94,0x00,0x00,0x00,0x00,0x44,0xfb,0x60,0x10,
+0x00,0x00,0x00,0x00,0x5b,0x4e,0x00,0x0c,0x07,0x00,0x04,0x24,0x7d,0x15,0x00,0x08,
+0x68,0x15,0x66,0x26,0x00,0x00,0xa2,0xac,0x48,0x16,0x00,0x08,0xff,0x00,0x02,0x24,
+0x00,0x00,0x62,0xac,0x85,0x16,0x00,0x08,0xff,0x00,0x02,0x24,0x00,0x00,0x62,0xac,
+0xc2,0x16,0x00,0x08,0xff,0x00,0x02,0x24,0x90,0x03,0x63,0x34,0x00,0x00,0x62,0xac,
+0x57,0x18,0x00,0x08,0x68,0x15,0x62,0x26,0x00,0x00,0x40,0xac,0x15,0x19,0x00,0x08,
+0x68,0x15,0x62,0x26,0x02,0x00,0x03,0x24,0x90,0x03,0x42,0x34,0x00,0x00,0x43,0xac,
+0x74,0x19,0x00,0x08,0x68,0x15,0x62,0x26,0x01,0x00,0x03,0x24,0x90,0x03,0x42,0x34,
+0x00,0x00,0x43,0xac,0xd4,0x19,0x00,0x08,0x68,0x15,0x62,0x26,0xd0,0x03,0x03,0x35,
+0x80,0x00,0x02,0x24,0x00,0x00,0x62,0xac,0x0a,0x1a,0x00,0x08,0x68,0x15,0x62,0x26,
+0x25,0xb0,0x02,0x3c,0x07,0x00,0x03,0x24,0x90,0x03,0x42,0x34,0x00,0x00,0x43,0xac,
+0x68,0x15,0x63,0x26,0x00,0x4b,0x62,0x8c,0x00,0x00,0x00,0x00,0x00,0x20,0x42,0x38,
+0xe2,0x16,0x00,0x08,0x00,0x4b,0x62,0xac,0x25,0xb0,0x02,0x3c,0x07,0x00,0x03,0x24,
+0x90,0x03,0x42,0x34,0x00,0x00,0x43,0xac,0x68,0x15,0x63,0x26,0x00,0x4b,0x62,0x8c,
+0x00,0x00,0x00,0x00,0x00,0x80,0x42,0x38,0x40,0x17,0x00,0x08,0x00,0x4b,0x62,0xac,
+0x06,0x00,0x03,0x24,0x90,0x03,0x42,0x34,0x00,0x00,0x43,0xac,0x99,0x17,0x00,0x08,
+0x68,0x15,0x62,0x26,0x05,0x00,0x03,0x24,0x90,0x03,0x42,0x34,0x00,0x00,0x43,0xac,
+0xf8,0x17,0x00,0x08,0x68,0x15,0x62,0x26,0x03,0x00,0x03,0x24,0x90,0x03,0x42,0x34,
+0x00,0x00,0x43,0xac,0xb6,0x18,0x00,0x08,0x68,0x15,0x62,0x26,0x25,0xb0,0x0d,0x3c,
+0x00,0x80,0x02,0x3c,0x18,0x03,0xa4,0x35,0xfc,0x69,0x42,0x24,0x02,0x80,0x03,0x3c,
+0x41,0xb0,0x08,0x3c,0x00,0x00,0x82,0xac,0x68,0x15,0x6a,0x24,0x0a,0x00,0x02,0x35,
+0x00,0x00,0x44,0x94,0x0a,0x4b,0x43,0x95,0x08,0x4b,0x4b,0x95,0x25,0x18,0x64,0x00,
+0xff,0xff,0x6c,0x30,0x24,0x10,0x8b,0x01,0x02,0x00,0x42,0x30,0x4d,0x00,0x40,0x10,
+0x02,0x00,0x64,0x38,0x02,0x00,0x02,0x24,0xc0,0x03,0xa3,0x35,0x00,0x00,0x62,0xac,
+0x0a,0x4b,0x44,0xa5,0x24,0x38,0x8b,0x01,0x04,0x00,0xe2,0x30,0x0a,0x00,0x40,0x10,
+0x08,0x00,0xe2,0x30,0x0a,0x4b,0x43,0x95,0x0c,0x00,0x04,0x35,0xc0,0x03,0xa5,0x35,
+0x04,0x00,0x63,0x38,0x04,0x00,0x02,0x24,0x00,0x00,0x86,0x8c,0x00,0x00,0xa2,0xac,
+0x0a,0x4b,0x43,0xa5,0x08,0x00,0xe2,0x30,0x08,0x00,0x40,0x10,0x10,0x00,0xe2,0x30,
+0x0a,0x4b,0x42,0x95,0xc0,0x03,0xa4,0x35,0x08,0x00,0x03,0x24,0x08,0x00,0x42,0x38,
+0x00,0x00,0x83,0xac,0x0a,0x4b,0x42,0xa5,0x10,0x00,0xe2,0x30,0x08,0x00,0x40,0x10,
+0x20,0x00,0xe2,0x30,0x0a,0x4b,0x42,0x95,0xc0,0x03,0xa4,0x35,0x10,0x00,0x03,0x24,
+0x10,0x00,0x42,0x38,0x00,0x00,0x83,0xac,0x0a,0x4b,0x42,0xa5,0x20,0x00,0xe2,0x30,
+0x08,0x00,0x40,0x10,0x80,0x00,0xe2,0x30,0x0a,0x4b,0x42,0x95,0xc0,0x03,0xa4,0x35,
+0x20,0x00,0x03,0x24,0x20,0x00,0x42,0x38,0x00,0x00,0x83,0xac,0x0a,0x4b,0x42,0xa5,
+0x80,0x00,0xe2,0x30,0x15,0x00,0x40,0x10,0x24,0x10,0x8b,0x01,0x02,0x80,0x09,0x3c,
+0x0a,0x4b,0x46,0x95,0x6c,0x7e,0x25,0x8d,0x08,0x00,0x02,0x3c,0x7f,0xff,0x04,0x24,
+0x24,0x20,0x64,0x01,0x25,0x28,0xa2,0x00,0x80,0x00,0xc6,0x38,0xb0,0x03,0xa7,0x35,
+0x08,0x00,0x08,0x35,0xc0,0x03,0xa3,0x35,0x80,0x00,0x02,0x24,0x00,0x00,0x62,0xac,
+0x21,0x58,0x80,0x00,0x00,0x00,0xe5,0xac,0x0a,0x4b,0x46,0xa5,0x6c,0x7e,0x25,0xad,
+0x00,0x00,0x04,0xa5,0x08,0x4b,0x44,0xa5,0x24,0x10,0x8b,0x01,0x00,0x30,0x42,0x30,
+0x06,0x00,0x40,0x10,0x00,0x00,0x00,0x00,0x0a,0x4b,0x42,0x95,0x00,0x00,0x00,0x00,
+0x00,0x10,0x42,0x38,0x00,0x20,0x42,0x34,0x0a,0x4b,0x42,0xa5,0x08,0x00,0xe0,0x03,
+0x00,0x00,0x00,0x00,0x95,0x1a,0x00,0x08,0x0a,0x4b,0x43,0xa5,0xf8,0xff,0xbd,0x27,
+0x04,0x00,0xb1,0xaf,0x00,0x00,0xb0,0xaf,0x00,0x40,0x02,0x40,0x00,0x68,0x08,0x40,
+0x00,0x70,0x02,0x40,0x00,0x60,0x09,0x40,0x25,0xb0,0x05,0x3c,0x00,0x80,0x02,0x3c,
+0x18,0x03,0xa3,0x34,0x7c,0x6b,0x42,0x24,0x00,0x00,0x62,0xac,0x80,0x00,0x87,0x8c,
+0x7c,0x02,0xa2,0x34,0x84,0x02,0xa3,0x34,0x88,0x02,0xa6,0x34,0x00,0x00,0x47,0xac,
+0x00,0x00,0x68,0xac,0x00,0x00,0xc9,0xac,0x74,0x00,0x83,0x8c,0x8c,0x02,0xa2,0x34,
+0x90,0x02,0xa7,0x34,0x00,0x00,0x43,0xac,0x08,0x00,0x86,0x8c,0x94,0x02,0xa8,0x34,
+0x98,0x02,0xa9,0x34,0x00,0x00,0xe6,0xac,0x0c,0x00,0x82,0x8c,0x9c,0x02,0xa6,0x34,
+0xa0,0x02,0xa7,0x34,0x00,0x00,0x02,0xad,0x10,0x00,0x83,0x8c,0xa4,0x02,0xa8,0x34,
+0xa8,0x02,0xaa,0x34,0x00,0x00,0x23,0xad,0x14,0x00,0x82,0x8c,0xac,0x02,0xa9,0x34,
+0xb0,0x02,0xab,0x34,0x00,0x00,0xc2,0xac,0x18,0x00,0x83,0x8c,0xb4,0x02,0xa6,0x34,
+0xb8,0x02,0xac,0x34,0x00,0x00,0xe3,0xac,0x1c,0x00,0x82,0x8c,0xbc,0x02,0xa7,0x34,
+0xc0,0x02,0xad,0x34,0x00,0x00,0x02,0xad,0x20,0x00,0x83,0x8c,0xc4,0x02,0xa8,0x34,
+0xc8,0x02,0xae,0x34,0x00,0x00,0x43,0xad,0x24,0x00,0x82,0x8c,0xcc,0x02,0xaa,0x34,
+0xd0,0x02,0xaf,0x34,0x00,0x00,0x22,0xad,0x28,0x00,0x83,0x8c,0xd4,0x02,0xa9,0x34,
+0xd8,0x02,0xb0,0x34,0x00,0x00,0x63,0xad,0x2c,0x00,0x82,0x8c,0x70,0x02,0xab,0x34,
+0x74,0x02,0xb1,0x34,0x00,0x00,0xc2,0xac,0x30,0x00,0x83,0x8c,0x78,0x02,0xa5,0x34,
+0x00,0x00,0x83,0xad,0x34,0x00,0x82,0x8c,0x00,0x00,0x00,0x00,0x00,0x00,0xe2,0xac,
+0x38,0x00,0x83,0x8c,0x00,0x00,0x00,0x00,0x00,0x00,0xa3,0xad,0x3c,0x00,0x82,0x8c,
+0x00,0x00,0x00,0x00,0x00,0x00,0x02,0xad,0x40,0x00,0x83,0x8c,0x00,0x00,0x00,0x00,
+0x00,0x00,0xc3,0xad,0x44,0x00,0x82,0x8c,0x00,0x00,0x00,0x00,0x00,0x00,0x42,0xad,
+0x48,0x00,0x83,0x8c,0x00,0x00,0x00,0x00,0x00,0x00,0xe3,0xad,0x4c,0x00,0x82,0x8c,
+0x00,0x00,0x00,0x00,0x00,0x00,0x22,0xad,0x50,0x00,0x83,0x8c,0x00,0x00,0x00,0x00,
+0x00,0x00,0x03,0xae,0x54,0x00,0x82,0x8c,0x00,0x00,0x00,0x00,0x00,0x00,0x62,0xad,
+0x58,0x00,0x83,0x8c,0x00,0x00,0x00,0x00,0x00,0x00,0x23,0xae,0x5c,0x00,0x82,0x8c,
+0x00,0x00,0x00,0x00,0x00,0x00,0xa2,0xac,0x42,0x1b,0x00,0x08,0x00,0x00,0x00,0x00,
+0x00,0x80,0x1b,0x3c,0x10,0x6d,0x7b,0x27,0x25,0xb0,0x1a,0x3c,0x18,0x03,0x5a,0x27,
+0x00,0x00,0x5b,0xaf,0x21,0xd8,0xa0,0x03,0x82,0xda,0x1b,0x00,0x80,0xda,0x1b,0x00,
+0x08,0x00,0x7b,0x27,0x04,0x00,0x61,0xaf,0x08,0x00,0x62,0xaf,0x0c,0x00,0x63,0xaf,
+0x10,0x00,0x64,0xaf,0x14,0x00,0x65,0xaf,0x18,0x00,0x66,0xaf,0x1c,0x00,0x67,0xaf,
+0x20,0x00,0x68,0xaf,0x24,0x00,0x69,0xaf,0x28,0x00,0x6a,0xaf,0x2c,0x00,0x6b,0xaf,
+0x30,0x00,0x6c,0xaf,0x34,0x00,0x6d,0xaf,0x38,0x00,0x6e,0xaf,0x3c,0x00,0x6f,0xaf,
+0x12,0x40,0x00,0x00,0x10,0x48,0x00,0x00,0x00,0x70,0x0a,0x40,0x40,0x00,0x70,0xaf,
+0x44,0x00,0x71,0xaf,0x48,0x00,0x72,0xaf,0x4c,0x00,0x73,0xaf,0x50,0x00,0x74,0xaf,
+0x54,0x00,0x75,0xaf,0x58,0x00,0x76,0xaf,0x5c,0x00,0x77,0xaf,0x60,0x00,0x78,0xaf,
+0x64,0x00,0x79,0xaf,0x68,0x00,0x7c,0xaf,0x6c,0x00,0x7d,0xaf,0x70,0x00,0x7e,0xaf,
+0x74,0x00,0x7f,0xaf,0x78,0x00,0x68,0xaf,0x7c,0x00,0x69,0xaf,0x80,0x00,0x6a,0xaf,
+0x00,0x68,0x1a,0x40,0x25,0xb0,0x1b,0x3c,0x1c,0x03,0x7b,0x37,0x00,0x00,0x00,0x00,
+0x00,0x00,0x7a,0xaf,0x7f,0x00,0x5b,0x33,0x30,0x00,0x60,0x13,0x00,0x00,0x00,0x00,
+0x25,0xb0,0x1b,0x3c,0x30,0x03,0x7b,0x37,0x00,0x00,0x00,0x00,0x00,0x00,0x7a,0xaf,
+0x00,0x00,0x00,0x00,0x21,0xd8,0xa0,0x03,0x82,0xda,0x1b,0x00,0x80,0xda,0x1b,0x00,
+0x08,0x00,0x7b,0x27,0x04,0x00,0x61,0xaf,0x08,0x00,0x62,0xaf,0x0c,0x00,0x63,0xaf,
+0x10,0x00,0x64,0xaf,0x14,0x00,0x65,0xaf,0x18,0x00,0x66,0xaf,0x1c,0x00,0x67,0xaf,
+0x20,0x00,0x68,0xaf,0x24,0x00,0x69,0xaf,0x28,0x00,0x6a,0xaf,0x2c,0x00,0x6b,0xaf,
+0x30,0x00,0x6c,0xaf,0x34,0x00,0x6d,0xaf,0x38,0x00,0x6e,0xaf,0x3c,0x00,0x6f,0xaf,
+0x12,0x40,0x00,0x00,0x10,0x48,0x00,0x00,0x00,0x70,0x0a,0x40,0x40,0x00,0x70,0xaf,
+0x44,0x00,0x71,0xaf,0x48,0x00,0x72,0xaf,0x4c,0x00,0x73,0xaf,0x50,0x00,0x74,0xaf,
+0x54,0x00,0x75,0xaf,0x58,0x00,0x76,0xaf,0x5c,0x00,0x77,0xaf,0x60,0x00,0x78,0xaf,
+0x64,0x00,0x79,0xaf,0x68,0x00,0x7c,0xaf,0x6c,0x00,0x7d,0xaf,0x70,0x00,0x7e,0xaf,
+0x74,0x00,0x7f,0xaf,0x78,0x00,0x68,0xaf,0x7c,0x00,0x69,0xaf,0x80,0x00,0x6a,0xaf,
+0xdf,0x1a,0x00,0x08,0x21,0x20,0x60,0x03,0x00,0x00,0x00,0x00,0x25,0xb0,0x08,0x3c,
+0x20,0x03,0x08,0x35,0x00,0x00,0x00,0x00,0x00,0x00,0x1a,0xad,0x00,0x04,0x5b,0x33,
+0x0a,0x00,0x60,0x13,0x00,0x00,0x00,0x00,0x00,0x80,0x08,0x3c,0x74,0x55,0x08,0x25,
+0x00,0x00,0x00,0x00,0x25,0xb0,0x1b,0x3c,0x24,0x03,0x7b,0x37,0x00,0x00,0x00,0x00,
+0x00,0x00,0x68,0xaf,0x09,0xf8,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x08,0x5b,0x33,
+0x25,0xb0,0x08,0x3c,0x28,0x03,0x08,0x35,0x00,0x00,0x00,0x00,0x00,0x00,0x1b,0xad,
+0x06,0x00,0x60,0x13,0x00,0x00,0x00,0x00,0x00,0x80,0x08,0x3c,0xfc,0x69,0x08,0x25,
+0x00,0x00,0x00,0x00,0x09,0xf8,0x00,0x01,0x00,0x00,0x00,0x00,0x02,0x80,0x1a,0x3c,
+0x6c,0x7e,0x5a,0x27,0x04,0x00,0x5b,0x97,0x25,0xb0,0x08,0x3c,0x30,0x03,0x08,0x35,
+0x00,0x00,0x00,0x00,0x00,0x00,0x1b,0xad,0x18,0x00,0x60,0x13,0x00,0x00,0x00,0x00,
+0x08,0xec,0x9b,0x27,0x00,0x00,0x00,0x00,0x04,0x00,0x61,0x8f,0xfc,0x03,0x70,0x7b,
+0x7c,0x00,0x62,0x7b,0xbc,0x00,0x64,0x7b,0xfc,0x00,0x66,0x7b,0x3c,0x01,0x68,0x7b,
+0x13,0x00,0x00,0x02,0x11,0x00,0x20,0x02,0x7c,0x01,0x6a,0x7b,0xbc,0x01,0x6c,0x7b,
+0xfc,0x01,0x6e,0x7b,0x3c,0x02,0x70,0x7b,0x7c,0x02,0x72,0x7b,0xbc,0x02,0x74,0x7b,
+0xfc,0x02,0x76,0x7b,0x3c,0x03,0x78,0x7b,0x7c,0x03,0x7c,0x7b,0xbc,0x03,0x7e,0x7b,
+0x80,0x00,0x7b,0x8f,0x2f,0x1c,0x00,0x08,0x00,0x00,0x00,0x00,0x21,0xd8,0xa0,0x03,
+0x82,0xda,0x1b,0x00,0x80,0xda,0x1b,0x00,0x08,0x00,0x7b,0x27,0x08,0x00,0x5b,0xaf,
+0xfc,0xef,0x9d,0x27,0x00,0x00,0x4a,0x8f,0x00,0x00,0x00,0x00,0x21,0x00,0x40,0x11,
+0x00,0x00,0x00,0x00,0x02,0x80,0x08,0x3c,0xcc,0x7d,0x08,0x25,0x21,0x48,0x00,0x00,
+0x21,0x58,0x00,0x00,0x01,0x00,0x6b,0x25,0x1a,0x00,0x40,0x11,0x24,0x70,0x4b,0x01,
+0x14,0x00,0xc0,0x11,0x01,0x00,0x04,0x24,0x00,0x00,0x00,0x00,0x04,0x00,0x44,0xa3,
+0x26,0x50,0x4b,0x01,0x00,0x00,0x4a,0xaf,0x80,0x80,0x09,0x00,0x21,0x80,0x08,0x02,
+0x00,0x00,0x10,0x8e,0x00,0x00,0x00,0x00,0x09,0xf8,0x00,0x02,0x00,0x00,0x00,0x00,
+0x00,0x80,0x1b,0x3c,0xe8,0x6f,0x7b,0x27,0x25,0xb0,0x1a,0x3c,0x18,0x03,0x5a,0x27,
+0x00,0x00,0x5b,0xaf,0x02,0x80,0x1a,0x3c,0x6c,0x7e,0x5a,0x27,0xe1,0xff,0x00,0x10,
+0x00,0x00,0x00,0x00,0x01,0x00,0x29,0x25,0x40,0x58,0x0b,0x00,0xf2,0x1b,0x00,0x08,
+0x00,0x00,0x00,0x00,0x02,0x80,0x1b,0x3c,0x6c,0x7e,0x7b,0x27,0x21,0x60,0x00,0x00,
+0x04,0x00,0x6c,0xa7,0x08,0x00,0x7a,0x8f,0x00,0x00,0x00,0x00,0xf8,0xff,0x5a,0x27,
+0x00,0x00,0x5a,0x8f,0x00,0x00,0x00,0x00,0x08,0x00,0x5a,0x27,0x84,0x00,0x44,0x8f,
+0x00,0x00,0x00,0x00,0xf9,0xff,0x80,0x10,0x00,0x00,0x00,0x00,0x04,0x00,0x41,0x8f,
+0xfc,0x03,0x50,0x7b,0x7c,0x00,0x42,0x7b,0xbc,0x00,0x44,0x7b,0xfc,0x00,0x46,0x7b,
+0x3c,0x01,0x48,0x7b,0x13,0x00,0x00,0x02,0x11,0x00,0x20,0x02,0x7c,0x01,0x4a,0x7b,
+0xbc,0x01,0x4c,0x7b,0xfc,0x01,0x4e,0x7b,0x3c,0x02,0x50,0x7b,0x7c,0x02,0x52,0x7b,
+0xbc,0x02,0x54,0x7b,0xfc,0x02,0x56,0x7b,0x3c,0x03,0x58,0x7b,0x7c,0x03,0x5c,0x7b,
+0xbc,0x03,0x5e,0x7b,0x80,0x00,0x5b,0x8f,0x00,0x00,0x00,0x00,0x08,0x00,0x60,0x03,
+0x10,0x00,0x00,0x42,0x00,0x60,0x05,0x40,0x42,0x28,0x05,0x00,0x40,0x28,0x05,0x00,
+0x00,0x60,0x85,0x40,0x04,0x00,0x81,0xac,0x08,0x00,0x82,0xac,0x0c,0x00,0x83,0xac,
+0x20,0x00,0x88,0xac,0x24,0x00,0x89,0xac,0x28,0x00,0x8a,0xac,0x2c,0x00,0x8b,0xac,
+0x30,0x00,0x8c,0xac,0x34,0x00,0x8d,0xac,0x38,0x00,0x8e,0xac,0x3c,0x00,0x8f,0xac,
+0x12,0x40,0x00,0x00,0x10,0x48,0x00,0x00,0x40,0x00,0x90,0xac,0x44,0x00,0x91,0xac,
+0x48,0x00,0x92,0xac,0x4c,0x00,0x93,0xac,0x50,0x00,0x94,0xac,0x54,0x00,0x95,0xac,
+0x58,0x00,0x96,0xac,0x5c,0x00,0x97,0xac,0x60,0x00,0x98,0xac,0x64,0x00,0x99,0xac,
+0x68,0x00,0x9c,0xac,0x6c,0x00,0x9d,0xac,0x70,0x00,0x9e,0xac,0x74,0x00,0x9f,0xac,
+0x78,0x00,0x88,0xac,0x7c,0x00,0x89,0xac,0x80,0x00,0x9f,0xac,0xf8,0xff,0x84,0x24,
+0x00,0x00,0x84,0x8c,0x00,0x00,0x00,0x00,0x08,0x00,0x84,0x24,0x84,0x00,0x86,0x8c,
+0x00,0x00,0x00,0x00,0xf9,0xff,0xc0,0x10,0x00,0x00,0x00,0x00,0x21,0xd8,0x80,0x00,
+0x01,0x00,0xba,0x24,0x04,0x00,0x61,0x8f,0xfc,0x03,0x70,0x7b,0x7c,0x00,0x62,0x7b,
+0xbc,0x00,0x64,0x7b,0xfc,0x00,0x66,0x7b,0x3c,0x01,0x68,0x7b,0x13,0x00,0x00,0x02,
+0x11,0x00,0x20,0x02,0x7c,0x01,0x6a,0x7b,0xbc,0x01,0x6c,0x7b,0xfc,0x01,0x6e,0x7b,
+0x3c,0x02,0x70,0x7b,0x7c,0x02,0x72,0x7b,0xbc,0x02,0x74,0x7b,0xfc,0x02,0x76,0x7b,
+0x3c,0x03,0x78,0x7b,0x7c,0x03,0x7c,0x7b,0xbc,0x03,0x7e,0x7b,0x80,0x00,0x7b,0x8f,
+0x00,0x00,0x00,0x00,0x08,0x00,0x60,0x03,0x00,0x60,0x9a,0x40,0x00,0x60,0x05,0x40,
+0x42,0x28,0x05,0x00,0x40,0x28,0x05,0x00,0x00,0x60,0x85,0x40,0x04,0x00,0x81,0xac,
+0x08,0x00,0x82,0xac,0x0c,0x00,0x83,0xac,0x20,0x00,0x88,0xac,0x24,0x00,0x89,0xac,
+0x28,0x00,0x8a,0xac,0x2c,0x00,0x8b,0xac,0x30,0x00,0x8c,0xac,0x34,0x00,0x8d,0xac,
+0x38,0x00,0x8e,0xac,0x3c,0x00,0x8f,0xac,0x12,0x40,0x00,0x00,0x10,0x48,0x00,0x00,
+0x40,0x00,0x90,0xac,0x44,0x00,0x91,0xac,0x48,0x00,0x92,0xac,0x4c,0x00,0x93,0xac,
+0x50,0x00,0x94,0xac,0x54,0x00,0x94,0xac,0x58,0x00,0x96,0xac,0x5c,0x00,0x96,0xac,
+0x60,0x00,0x98,0xac,0x64,0x00,0x99,0xac,0x68,0x00,0x9c,0xac,0x6c,0x00,0x9d,0xac,
+0x70,0x00,0x9e,0xac,0x78,0x00,0x88,0xac,0x7c,0x00,0x89,0xac,0x80,0x00,0x9f,0xac,
+0x84,0x00,0x80,0xac,0xf8,0xff,0x84,0x24,0x00,0x00,0x84,0x8c,0x00,0x00,0x00,0x00,
+0x08,0x00,0x84,0x24,0x84,0x00,0x86,0x8c,0xfa,0xff,0xc0,0x10,0x00,0x00,0x00,0x00,
+0x21,0xd8,0x80,0x00,0x01,0x00,0xba,0x24,0x04,0x00,0x61,0x8f,0xfc,0x03,0x70,0x7b,
+0x7c,0x00,0x62,0x7b,0xbc,0x00,0x64,0x7b,0xfc,0x00,0x66,0x7b,0x3c,0x01,0x68,0x7b,
+0x13,0x00,0x00,0x02,0x11,0x00,0x20,0x02,0x7c,0x01,0x6a,0x7b,0xbc,0x01,0x6c,0x7b,
+0xfc,0x01,0x6e,0x7b,0x3c,0x02,0x70,0x7b,0x7c,0x02,0x72,0x7b,0xbc,0x02,0x74,0x7b,
+0xfc,0x02,0x76,0x7b,0x3c,0x03,0x78,0x7b,0x7c,0x03,0x7c,0x7b,0xbc,0x03,0x7e,0x7b,
+0x80,0x00,0x7b,0x8f,0x08,0x00,0x60,0x03,0x00,0x60,0x9a,0x40,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0xc6,0x7f,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x80,0x1b,0x3c,0x00,0x00,0x7b,0x27,
+0x25,0xb0,0x1a,0x3c,0x18,0x03,0x5a,0x27,0x00,0x00,0x5b,0xaf,0x00,0x00,0x05,0x24,
+0x03,0x00,0xa4,0x24,0x00,0xa0,0x80,0x40,0x00,0xa0,0x84,0x40,0x01,0x80,0x04,0x3c,
+0x98,0x03,0x84,0x24,0x08,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x01,0x80,0x1b,0x3c,0x98,0x03,0x7b,0x27,0x25,0xb0,0x1a,0x3c,0x18,0x03,0x5a,0x27,
+0x00,0x00,0x5b,0xaf,0x02,0x80,0x1a,0x3c,0x00,0x00,0x5a,0x27,0xfc,0x03,0x5d,0x27,
+0x02,0x80,0x1c,0x3c,0x00,0x14,0x9c,0x27,0x00,0xf0,0x08,0x3c,0x00,0x0c,0x08,0x35,
+0x00,0x60,0x88,0x40,0x02,0x80,0x04,0x3c,0x00,0x00,0x84,0x24,0xff,0x7f,0x05,0x3c,
+0xff,0xff,0xa5,0x34,0x24,0x20,0x85,0x00,0x00,0x20,0x84,0x4c,0xff,0xff,0x05,0x34,
+0x21,0x28,0xa4,0x00,0x00,0x28,0x85,0x4c,0x00,0x80,0x04,0x3c,0x00,0x00,0x84,0x24,
+0xff,0x7f,0x05,0x3c,0xff,0xff,0xa5,0x34,0x24,0x20,0x85,0x00,0x00,0x00,0x84,0x4c,
+0xff,0x7f,0x06,0x24,0x21,0x30,0xc4,0x00,0x24,0x30,0xc5,0x00,0x00,0x08,0x86,0x4c,
+0x00,0xa0,0x04,0x40,0x10,0x00,0x84,0x34,0x00,0xa0,0x84,0x40,0x01,0x80,0x1b,0x3c,
+0x24,0x04,0x7b,0x27,0x25,0xb0,0x1a,0x3c,0x18,0x03,0x5a,0x27,0x00,0x00,0x5b,0xaf,
+0x00,0x00,0x00,0x00,0x25,0xb0,0x04,0x3c,0x44,0x00,0x84,0x34,0x00,0x00,0x85,0x84,
+0x20,0x00,0x06,0x24,0x25,0x28,0xa6,0x00,0x00,0x00,0x85,0xa4,0x01,0x80,0x1b,0x3c,
+0x54,0x04,0x7b,0x27,0x25,0xb0,0x1a,0x3c,0x18,0x03,0x5a,0x27,0x00,0x00,0x5b,0xaf,
+0x25,0xb0,0x04,0x3c,0x44,0x00,0x84,0x34,0x00,0x00,0x85,0x8c,0x00,0x00,0x00,0x00,
+0x10,0x00,0xa5,0x30,0xfc,0xff,0xa0,0x10,0x00,0x00,0x00,0x00,0xff,0x1f,0x07,0x3c,
+0xff,0xff,0xe7,0x34,0x02,0x80,0x05,0x3c,0x88,0x7d,0xa5,0x24,0xff,0xff,0xa5,0x30,
+0x40,0xb0,0x04,0x3c,0x25,0x28,0xa4,0x00,0x24,0x28,0xa7,0x00,0x21,0x30,0x00,0x00,
+0x43,0xb0,0x02,0x3c,0x00,0x80,0x04,0x3c,0x40,0x00,0x84,0x34,0x00,0x00,0x45,0xac,
+0x04,0x00,0x46,0xac,0x08,0x00,0x44,0xac,0x4e,0x58,0x00,0x08,0x00,0x00,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x09,0x00,0x02,0x24,0xff,0xff,0x42,0x24,
+0xff,0xff,0x41,0x04,0xff,0xff,0x42,0x24,0x08,0x00,0xe0,0x03,0x01,0x00,0x42,0x24,
+0x00,0x60,0x02,0x40,0x01,0x00,0x41,0x34,0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,
+0x08,0x00,0xe0,0x03,0x00,0x00,0x82,0xac,0x00,0x00,0x82,0x8c,0x00,0x00,0x00,0x00,
+0x21,0x18,0x40,0x00,0x00,0x60,0x83,0x40,0x08,0x00,0xe0,0x03,0x00,0x00,0x82,0xac,
+0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,0x08,0x00,0xe0,0x03,
+0x00,0x00,0x00,0x00,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x01,0x00,0x21,0x38,
+0x00,0x60,0x81,0x40,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x01,0x80,0x03,0x3c,
+0x25,0xb0,0x02,0x3c,0x44,0x05,0x63,0x24,0x18,0x03,0x42,0x34,0x00,0x00,0x43,0xac,
+0x04,0x00,0x85,0x8c,0x00,0x80,0x03,0x3c,0x01,0x00,0x02,0x24,0x25,0x28,0xa3,0x00,
+0x00,0x00,0xa4,0x8c,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x01,0x80,0x03,0x3c,
+0x25,0xb0,0x02,0x3c,0x74,0x05,0x63,0x24,0x18,0x03,0x42,0x34,0x00,0x00,0x43,0xac,
+0x04,0x00,0x82,0x8c,0x02,0x00,0x83,0x94,0x00,0x80,0x07,0x3c,0x25,0x28,0x47,0x00,
+0x00,0x00,0xa2,0x8c,0x10,0x00,0x02,0x24,0x13,0x00,0x62,0x10,0x11,0x00,0x66,0x28,
+0x06,0x00,0xc0,0x10,0x20,0x00,0x02,0x24,0x08,0x00,0x02,0x24,0x17,0x00,0x62,0x10,
+0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,0x01,0x00,0x02,0x24,0xfd,0xff,0x62,0x14,
+0x00,0x00,0x00,0x00,0x08,0x00,0x83,0x8c,0x00,0x00,0x00,0x00,0x00,0x00,0xa3,0xac,
+0x04,0x00,0x82,0x8c,0x00,0x00,0x00,0x00,0x25,0x10,0x47,0x00,0x00,0x00,0x42,0x8c,
+0x08,0x00,0xe0,0x03,0x01,0x00,0x02,0x24,0x08,0x00,0x82,0x8c,0x00,0x00,0x00,0x00,
+0x00,0x00,0xa2,0xa4,0x04,0x00,0x83,0x8c,0x00,0x00,0x00,0x00,0x25,0x18,0x67,0x00,
+0x00,0x00,0x62,0x94,0x08,0x00,0xe0,0x03,0x01,0x00,0x02,0x24,0x08,0x00,0x82,0x8c,
+0x00,0x00,0x00,0x00,0x00,0x00,0xa2,0xa0,0x04,0x00,0x83,0x8c,0x00,0x00,0x00,0x00,
+0x25,0x18,0x67,0x00,0x00,0x00,0x62,0x90,0x08,0x00,0xe0,0x03,0x01,0x00,0x02,0x24,
+0xe0,0xff,0xbd,0x27,0x14,0x00,0xb1,0xaf,0x02,0x80,0x11,0x3c,0x1c,0x00,0xbf,0xaf,
+0x18,0x00,0xb2,0xaf,0x10,0x00,0xb0,0xaf,0x68,0x15,0x31,0x26,0xe4,0x64,0x30,0x96,
+0x02,0x80,0x02,0x3c,0x01,0x80,0x03,0x3c,0x25,0x80,0x02,0x02,0x25,0xb0,0x02,0x3c,
+0x38,0x06,0x63,0x24,0x18,0x03,0x42,0x34,0x60,0x00,0x04,0x26,0x80,0x00,0x05,0x26,
+0x00,0x00,0x43,0xac,0xab,0x45,0x00,0x0c,0x03,0x00,0x06,0x24,0x21,0x20,0x00,0x02,
+0x21,0x28,0x00,0x00,0x97,0x45,0x00,0x0c,0x08,0x00,0x06,0x24,0xe4,0x64,0x22,0x8e,
+0x0c,0x00,0x03,0x24,0x0c,0x00,0x43,0xae,0x08,0x00,0x42,0xae,0x12,0x00,0x02,0x24,
+0x14,0x00,0x42,0xae,0x21,0x20,0x40,0x02,0x1c,0x00,0xbf,0x8f,0x18,0x00,0xb2,0x8f,
+0x14,0x00,0xb1,0x8f,0x10,0x00,0xb0,0x8f,0x8b,0x07,0x00,0x08,0x20,0x00,0xbd,0x27,
+0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,0x08,0x00,0xe0,0x03,0x01,0x00,0x02,0x24,
+0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,0x08,0x00,0xe0,0x03,0x01,0x00,0x02,0x24,
+0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x01,0x00,0x02,0x24,0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x01,0x00,0x02,0x24,0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,0x01,0x00,0x02,0x24,
+0x08,0x00,0xe0,0x03,0x01,0x00,0x02,0x24,0x02,0x80,0x02,0x3c,0x21,0x48,0x80,0x00,
+0x68,0x15,0x48,0x24,0x21,0x38,0x00,0x00,0x21,0x28,0x27,0x01,0x00,0x00,0xa2,0x90,
+0x21,0x20,0xe8,0x00,0x01,0x00,0xe7,0x24,0x38,0x4c,0x82,0xa0,0x1e,0x00,0xa3,0x90,
+0x1e,0x00,0xe6,0x28,0x56,0x4c,0x83,0xa0,0x3c,0x00,0xa2,0x90,0x00,0x00,0x00,0x00,
+0x74,0x4c,0x82,0xa0,0x5a,0x00,0xa3,0x90,0xf3,0xff,0xc0,0x14,0x92,0x4c,0x83,0xa0,
+0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,0x08,0x00,0xe0,0x03,0x01,0x00,0x02,0x24,
+0x20,0xbd,0x03,0x3c,0x58,0x00,0x63,0x34,0x00,0x00,0x62,0x90,0x0f,0x27,0x07,0x24,
+0x20,0x00,0x42,0x34,0x00,0x00,0x62,0xa0,0xff,0xff,0xe7,0x24,0xff,0xff,0xe1,0x04,
+0xff,0xff,0xe7,0x24,0x62,0xbd,0x04,0x3c,0x24,0x10,0x82,0x34,0x00,0x00,0x40,0xa0,
+0x28,0x10,0x83,0x34,0x0c,0x11,0x86,0x34,0x0e,0x00,0x02,0x24,0x00,0x00,0x60,0xa0,
+0x00,0x11,0x85,0x34,0x00,0x00,0xc2,0xa0,0x00,0x00,0xa7,0x8c,0xdf,0xff,0x02,0x24,
+0x10,0x00,0x86,0x34,0x24,0x38,0xe2,0x00,0x49,0x0c,0x03,0x24,0xcf,0xff,0x02,0x24,
+0x00,0x00,0xc3,0xac,0x04,0x00,0x84,0x34,0x00,0x00,0xa7,0xac,0x24,0x38,0xe2,0x00,
+0x41,0x0c,0x02,0x24,0x00,0x00,0xa7,0xac,0x00,0x00,0x80,0xac,0x00,0x00,0xc2,0xac,
+0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,0xd0,0xff,0xbd,0x27,0x25,0xb0,0x03,0x3c,
+0x01,0x80,0x02,0x3c,0xb0,0x03,0x68,0x34,0x1c,0x00,0xb1,0xaf,0x18,0x03,0x63,0x34,
+0xd8,0xff,0x91,0x24,0xa0,0x08,0x42,0x24,0x00,0x00,0x62,0xac,0x28,0x00,0xbf,0xaf,
+0x00,0x00,0x11,0xad,0x24,0x00,0xb3,0xaf,0x20,0x00,0xb2,0xaf,0x18,0x00,0xb0,0xaf,
+0x02,0x80,0x13,0x3c,0x00,0x00,0x23,0x96,0x68,0x15,0x73,0x26,0xff,0xff,0x32,0x32,
+0x40,0x10,0x02,0x3c,0x78,0x64,0x65,0x8e,0x25,0x90,0x42,0x02,0x02,0x80,0x10,0x3c,
+0x8c,0x96,0x10,0x26,0x20,0x00,0x42,0x26,0x00,0x00,0x03,0xad,0x20,0x00,0x06,0x24,
+0x00,0x00,0x02,0xad,0x21,0x38,0x00,0x02,0x0c,0x00,0x03,0xae,0x0a,0x00,0x04,0x24,
+0x64,0x01,0x00,0x0c,0x08,0x00,0x02,0xae,0x04,0x00,0x23,0x8e,0xff,0xe0,0x02,0x24,
+0x28,0x00,0x04,0x24,0x24,0x18,0x62,0x00,0x00,0x10,0x63,0x34,0x02,0x00,0x24,0xa2,
+0x04,0x00,0x23,0xae,0x0c,0x00,0x02,0x8e,0x0a,0x00,0x04,0x24,0xf8,0xff,0x42,0x24,
+0x4d,0x01,0x00,0x0c,0x00,0x00,0x22,0xa6,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,
+0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,0x0c,0x00,0x07,0x8e,0x20,0x10,0x06,0x3c,
+0x21,0x28,0x40,0x02,0x20,0x00,0xe7,0x24,0x00,0xfe,0xc6,0x34,0xff,0xff,0xe7,0x30,
+0x01,0x00,0x11,0x24,0x0a,0x00,0x04,0x24,0x10,0x01,0x00,0x0c,0x10,0x00,0xb1,0xaf,
+0xd5,0x4a,0x63,0x92,0x2a,0xb0,0x10,0x3c,0x32,0x00,0x02,0x36,0x01,0x00,0x63,0x24,
+0x00,0x00,0x43,0xa0,0x4d,0x01,0x00,0x0c,0x0a,0x00,0x04,0x24,0xc9,0x64,0x62,0x92,
+0x00,0x00,0x00,0x00,0x01,0x00,0x42,0x24,0xc9,0x64,0x62,0xa2,0x00,0x60,0x01,0x40,
+0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,0x01,0x00,0x10,0x36,0x00,0x00,0x11,0xa2,
+0x28,0x00,0xbf,0x8f,0x24,0x00,0xb3,0x8f,0x20,0x00,0xb2,0x8f,0x1c,0x00,0xb1,0x8f,
+0x18,0x00,0xb0,0x8f,0x21,0x10,0x00,0x00,0x08,0x00,0xe0,0x03,0x30,0x00,0xbd,0x27,
+0x25,0xb0,0x05,0x3c,0x01,0x80,0x03,0x3c,0x21,0x38,0x80,0x00,0x18,0x03,0xa2,0x34,
+0xe8,0x09,0x63,0x24,0x01,0x00,0x04,0x24,0x00,0x00,0x43,0xac,0x35,0x00,0xe4,0x10,
+0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x10,0x20,0x08,0xa2,0x34,0x02,0x00,0x02,0x24,
+0x83,0x00,0xe2,0x10,0x03,0x00,0x02,0x24,0x5a,0x00,0xe2,0x10,0x00,0x00,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x02,0x80,0x03,0x3c,0x00,0x00,0x44,0x8c,
+0x68,0x15,0x66,0x24,0x70,0x08,0x02,0x24,0xe0,0x08,0x03,0x24,0x74,0x4b,0xc2,0xac,
+0x40,0x08,0x02,0x24,0x78,0x4b,0xc3,0xac,0x84,0x4b,0xc2,0xac,0x78,0x08,0x03,0x24,
+0x0c,0x08,0x02,0x24,0x88,0x4b,0xc3,0xac,0x8c,0x4b,0xc2,0xac,0x10,0x08,0x03,0x24,
+0x20,0x08,0x02,0x24,0x90,0x4b,0xc3,0xac,0x94,0x4b,0xc2,0xac,0x24,0x08,0x03,0x24,
+0x58,0x08,0x02,0x24,0x98,0x4b,0xc3,0xac,0x9c,0x4b,0xc2,0xac,0x50,0x0c,0x03,0x24,
+0x54,0x0c,0x02,0x24,0xa0,0x4b,0xc3,0xac,0xa4,0x4b,0xc2,0xac,0x14,0x0c,0x03,0x24,
+0x10,0x0c,0x02,0x24,0x60,0x08,0x05,0x24,0xa8,0x4b,0xc3,0xac,0xac,0x4b,0xc2,0xac,
+0x80,0x0c,0x03,0x24,0x84,0x0c,0x02,0x24,0x00,0x01,0x84,0x30,0xb4,0x4b,0xc2,0xac,
+0x80,0x4b,0xc5,0xac,0xb0,0x4b,0xc3,0xac,0x71,0x4b,0xc0,0xa0,0x7c,0x4b,0xc5,0xac,
+0x02,0x00,0x80,0x10,0xa0,0x08,0x02,0x24,0xb8,0x08,0x02,0x24,0x08,0x00,0xe0,0x03,
+0xb8,0x4b,0xc2,0xac,0x28,0x08,0xa2,0x34,0x02,0x80,0x03,0x3c,0x00,0x00,0x44,0x8c,
+0x68,0x15,0x66,0x24,0x70,0x08,0x02,0x24,0xe0,0x08,0x03,0x24,0x74,0x4b,0xc2,0xac,
+0x44,0x08,0x02,0x24,0x78,0x4b,0xc3,0xac,0x84,0x4b,0xc2,0xac,0x78,0x08,0x03,0x24,
+0x0c,0x08,0x02,0x24,0x88,0x4b,0xc3,0xac,0x8c,0x4b,0xc2,0xac,0x14,0x08,0x03,0x24,
+0x28,0x08,0x02,0x24,0x90,0x4b,0xc3,0xac,0x94,0x4b,0xc2,0xac,0x2c,0x08,0x03,0x24,
+0x58,0x08,0x02,0x24,0x98,0x4b,0xc3,0xac,0x9c,0x4b,0xc2,0xac,0x58,0x0c,0x03,0x24,
+0x5c,0x0c,0x02,0x24,0xa0,0x4b,0xc3,0xac,0xa4,0x4b,0xc2,0xac,0x1c,0x0c,0x03,0x24,
+0x18,0x0c,0x02,0x24,0x64,0x08,0x05,0x24,0xa8,0x4b,0xc3,0xac,0xac,0x4b,0xc2,0xac,
+0x88,0x0c,0x03,0x24,0x8c,0x0c,0x02,0x24,0x00,0x01,0x84,0x30,0xb4,0x4b,0xc2,0xac,
+0x71,0x4b,0xc7,0xa0,0x80,0x4b,0xc5,0xac,0xb0,0x4b,0xc3,0xac,0x7c,0x4b,0xc5,0xac,
+0xd6,0xff,0x80,0x10,0xa4,0x08,0x02,0x24,0xbc,0x08,0x02,0x24,0x08,0x00,0xe0,0x03,
+0xb8,0x4b,0xc2,0xac,0x02,0x80,0x02,0x3c,0x68,0x15,0x42,0x24,0xac,0x08,0x03,0x24,
+0xb8,0x4b,0x43,0xac,0x74,0x08,0x03,0x24,0xe4,0x08,0x04,0x24,0x74,0x4b,0x43,0xac,
+0x4c,0x08,0x03,0x24,0x78,0x4b,0x44,0xac,0x84,0x4b,0x43,0xac,0x7c,0x08,0x04,0x24,
+0x0c,0x08,0x03,0x24,0x88,0x4b,0x44,0xac,0x8c,0x4b,0x43,0xac,0x1c,0x08,0x04,0x24,
+0x38,0x08,0x03,0x24,0x90,0x4b,0x44,0xac,0x94,0x4b,0x43,0xac,0x3c,0x08,0x04,0x24,
+0x5c,0x08,0x03,0x24,0x98,0x4b,0x44,0xac,0x9c,0x4b,0x43,0xac,0x68,0x0c,0x04,0x24,
+0x6c,0x0c,0x03,0x24,0xa0,0x4b,0x44,0xac,0xa4,0x4b,0x43,0xac,0x2c,0x0c,0x04,0x24,
+0x28,0x0c,0x03,0x24,0x6c,0x08,0x05,0x24,0xa8,0x4b,0x44,0xac,0xac,0x4b,0x43,0xac,
+0x98,0x0c,0x04,0x24,0x9c,0x0c,0x03,0x24,0x71,0x4b,0x47,0xa0,0x80,0x4b,0x45,0xac,
+0xb0,0x4b,0x44,0xac,0xb4,0x4b,0x43,0xac,0x08,0x00,0xe0,0x03,0x7c,0x4b,0x45,0xac,
+0x02,0x80,0x02,0x3c,0x68,0x15,0x42,0x24,0xa8,0x08,0x03,0x24,0xb8,0x4b,0x43,0xac,
+0x74,0x08,0x03,0x24,0xe4,0x08,0x04,0x24,0x74,0x4b,0x43,0xac,0x48,0x08,0x03,0x24,
+0x78,0x4b,0x44,0xac,0x84,0x4b,0x43,0xac,0x7c,0x08,0x04,0x24,0x0c,0x08,0x03,0x24,
+0x88,0x4b,0x44,0xac,0x8c,0x4b,0x43,0xac,0x18,0x08,0x04,0x24,0x30,0x08,0x03,0x24,
+0x90,0x4b,0x44,0xac,0x94,0x4b,0x43,0xac,0x34,0x08,0x04,0x24,0x5c,0x08,0x03,0x24,
+0x98,0x4b,0x44,0xac,0x9c,0x4b,0x43,0xac,0x60,0x0c,0x04,0x24,0x64,0x0c,0x03,0x24,
+0xa0,0x4b,0x44,0xac,0xa4,0x4b,0x43,0xac,0x24,0x0c,0x04,0x24,0x20,0x0c,0x03,0x24,
+0x68,0x08,0x05,0x24,0xa8,0x4b,0x44,0xac,0xac,0x4b,0x43,0xac,0x90,0x0c,0x04,0x24,
+0x94,0x0c,0x03,0x24,0x71,0x4b,0x47,0xa0,0x80,0x4b,0x45,0xac,0xb0,0x4b,0x44,0xac,
+0xb4,0x4b,0x43,0xac,0x08,0x00,0xe0,0x03,0x7c,0x4b,0x45,0xac,0x36,0x43,0x00,0x08,
+0x21,0x18,0x00,0x00,0x20,0x00,0x62,0x2c,0x06,0x00,0x40,0x10,0x00,0x00,0x00,0x00,
+0x06,0x10,0x64,0x00,0x01,0x00,0x42,0x30,0xfa,0xff,0x40,0x10,0x01,0x00,0x63,0x24,
+0xff,0xff,0x63,0x24,0x08,0x00,0xe0,0x03,0x21,0x10,0x60,0x00,0xd8,0xff,0xbd,0x27,
+0x25,0xb0,0x02,0x3c,0x18,0x00,0xb2,0xaf,0x21,0x90,0x82,0x00,0xff,0xff,0x02,0x24,
+0x1c,0x00,0xb3,0xaf,0x14,0x00,0xb1,0xaf,0x20,0x00,0xbf,0xaf,0x10,0x00,0xb0,0xaf,
+0x21,0x88,0xa0,0x00,0x21,0x20,0xa0,0x00,0x21,0x18,0x40,0x02,0x10,0x00,0xa2,0x10,
+0x21,0x98,0xc0,0x00,0x00,0x00,0x50,0x8e,0x31,0x43,0x00,0x0c,0x00,0x00,0x00,0x00,
+0x04,0x10,0x53,0x00,0x27,0x18,0x11,0x00,0x25,0x18,0x62,0x00,0x24,0x18,0x70,0x00,
+0x00,0x00,0x43,0xae,0x20,0x00,0xbf,0x8f,0x1c,0x00,0xb3,0x8f,0x18,0x00,0xb2,0x8f,
+0x14,0x00,0xb1,0x8f,0x10,0x00,0xb0,0x8f,0x08,0x00,0xe0,0x03,0x28,0x00,0xbd,0x27,
+0x20,0x00,0xbf,0x8f,0x1c,0x00,0xb3,0x8f,0x18,0x00,0xb2,0x8f,0x14,0x00,0xb1,0x8f,
+0x10,0x00,0xb0,0x8f,0x28,0x00,0xbd,0x27,0x00,0x00,0x66,0xac,0x08,0x00,0xe0,0x03,
+0x00,0x00,0x00,0x00,0x02,0x80,0x02,0x3c,0x21,0x30,0x80,0x00,0xec,0x60,0x44,0x8c,
+0x3d,0x43,0x00,0x08,0xff,0xff,0x05,0x24,0xe0,0xff,0xbd,0x27,0x25,0xb0,0x02,0x3c,
+0x18,0x00,0xbf,0xaf,0x14,0x00,0xb1,0xaf,0x10,0x00,0xb0,0xaf,0x21,0x20,0x82,0x00,
+0x00,0x00,0x90,0x8c,0x21,0x88,0xa0,0x00,0x31,0x43,0x00,0x0c,0x21,0x20,0xa0,0x00,
+0x24,0x80,0x11,0x02,0x06,0x10,0x50,0x00,0x18,0x00,0xbf,0x8f,0x14,0x00,0xb1,0x8f,
+0x10,0x00,0xb0,0x8f,0x08,0x00,0xe0,0x03,0x20,0x00,0xbd,0x27,0xd0,0xff,0xbd,0x27,
+0x14,0x00,0xb1,0xaf,0x02,0x80,0x11,0x3c,0x28,0x00,0xbf,0xaf,0x20,0x00,0xb4,0xaf,
+0x1c,0x00,0xb3,0xaf,0x18,0x00,0xb2,0xaf,0x24,0x00,0xb5,0xaf,0x10,0x00,0xb0,0xaf,
+0x68,0x15,0x31,0x26,0x98,0x4b,0x22,0x8e,0x25,0xb0,0x12,0x3c,0x24,0x08,0x53,0x36,
+0x21,0x10,0x52,0x00,0x00,0x00,0x70,0x8e,0x00,0x00,0x55,0x8c,0x7f,0x80,0x03,0x3c,
+0xff,0x7f,0x02,0x3c,0xff,0xff,0x63,0x34,0xff,0xff,0x42,0x34,0x24,0x10,0x02,0x02,
+0x24,0x18,0xa3,0x02,0xc0,0x25,0x04,0x00,0x25,0x18,0x64,0x00,0x00,0x80,0x14,0x3c,
+0x00,0x00,0x62,0xae,0x01,0x00,0x04,0x24,0x84,0x0a,0x00,0x0c,0x25,0xa8,0x74,0x00,
+0x98,0x4b,0x22,0x8e,0x25,0x80,0x14,0x02,0x01,0x00,0x04,0x24,0x21,0x10,0x52,0x00,
+0x00,0x00,0x55,0xac,0x84,0x0a,0x00,0x0c,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0xae,
+0x84,0x0a,0x00,0x0c,0x01,0x00,0x04,0x24,0xb8,0x4b,0x24,0x8e,0x0f,0x00,0x05,0x3c,
+0x28,0x00,0xbf,0x8f,0x24,0x00,0xb5,0x8f,0x20,0x00,0xb4,0x8f,0x1c,0x00,0xb3,0x8f,
+0x18,0x00,0xb2,0x8f,0x14,0x00,0xb1,0x8f,0x10,0x00,0xb0,0x8f,0xff,0xff,0xa5,0x34,
+0x68,0x43,0x00,0x08,0x30,0x00,0xbd,0x27,0xe0,0xff,0xbd,0x27,0x14,0x00,0xb1,0xaf,
+0x02,0x80,0x11,0x3c,0x10,0x00,0xb0,0xaf,0x18,0x00,0xbf,0xaf,0x68,0x15,0x27,0x26,
+0x73,0x4b,0xe5,0x90,0x01,0x80,0x03,0x3c,0x25,0xb0,0x02,0x3c,0xb0,0x0e,0x63,0x24,
+0x18,0x03,0x42,0x34,0x02,0x00,0x06,0x24,0x00,0x00,0x43,0xac,0x34,0x00,0xa6,0x10,
+0x21,0x80,0x80,0x00,0x03,0x00,0x03,0x24,0x3a,0x00,0xa3,0x10,0x2e,0x00,0x02,0x2e,
+0x10,0x00,0x02,0x2e,0x07,0x00,0x40,0x10,0x00,0x00,0x00,0x00,0xff,0x00,0x04,0x32,
+0x18,0x00,0xbf,0x8f,0x14,0x00,0xb1,0x8f,0x10,0x00,0xb0,0x8f,0x79,0x43,0x00,0x08,
+0x20,0x00,0xbd,0x27,0xfa,0xff,0xa6,0x14,0xff,0x00,0x04,0x32,0x71,0x4b,0xe4,0x90,
+0x01,0x00,0x02,0x24,0x33,0x00,0x82,0x10,0x02,0x00,0x82,0x28,0x38,0x00,0x40,0x14,
+0x00,0x00,0x00,0x00,0x38,0x00,0x85,0x10,0x68,0x15,0x22,0x26,0x2e,0x00,0x83,0x10,
+0x00,0x00,0x00,0x00,0x00,0x08,0x04,0x24,0x68,0x43,0x00,0x0c,0xff,0xff,0x05,0x24,
+0xff,0xfc,0x06,0x3c,0xff,0xff,0xc6,0x34,0x24,0x30,0x46,0x00,0x00,0x08,0x04,0x24,
+0x3d,0x43,0x00,0x0c,0xff,0xff,0x05,0x24,0x68,0x15,0x22,0x26,0x71,0x4b,0x44,0x90,
+0x01,0x00,0x03,0x24,0x07,0x00,0x83,0x10,0x02,0x00,0x82,0x28,0x2c,0x00,0x40,0x14,
+0x02,0x00,0x02,0x24,0x2c,0x00,0x82,0x10,0x03,0x00,0x02,0x24,0xdb,0xff,0x82,0x14,
+0x00,0x00,0x00,0x00,0x68,0x15,0x22,0x26,0x74,0x4b,0x44,0x8c,0x0f,0x00,0x05,0x3c,
+0x3d,0x43,0x00,0x0c,0x21,0x30,0x00,0x00,0xc2,0x43,0x00,0x08,0xff,0x00,0x04,0x32,
+0x25,0x00,0x82,0x2c,0xcc,0xff,0x40,0x14,0x03,0x00,0x03,0x24,0x18,0x00,0xbf,0x8f,
+0x14,0x00,0xb1,0x8f,0x10,0x00,0xb0,0x8f,0x21,0x10,0x00,0x00,0x08,0x00,0xe0,0x03,
+0x20,0x00,0xbd,0x27,0xc7,0xff,0x40,0x14,0x10,0x00,0x02,0x2e,0x18,0x00,0xbf,0x8f,
+0x14,0x00,0xb1,0x8f,0x10,0x00,0xb0,0x8f,0x21,0x10,0x00,0x00,0x08,0x00,0xe0,0x03,
+0x20,0x00,0xbd,0x27,0x68,0x15,0x22,0x26,0x74,0x4b,0x44,0x8c,0x0f,0x00,0x05,0x3c,
+0x3d,0x43,0x00,0x0c,0x0f,0x00,0x06,0x24,0xd4,0x43,0x00,0x08,0x00,0x08,0x04,0x24,
+0xcc,0xff,0x80,0x14,0x68,0x15,0x22,0x26,0x74,0x4b,0x44,0x8c,0x0f,0x00,0x05,0x24,
+0x3d,0x43,0x00,0x0c,0x0f,0x00,0x06,0x24,0xd4,0x43,0x00,0x08,0x00,0x08,0x04,0x24,
+0xb2,0xff,0x80,0x14,0x00,0x00,0x00,0x00,0x68,0x15,0x22,0x26,0x74,0x4b,0x44,0x8c,
+0x0f,0x00,0x05,0x24,0x3d,0x43,0x00,0x0c,0x21,0x30,0x00,0x00,0xc2,0x43,0x00,0x08,
+0xff,0x00,0x04,0x32,0xe0,0xff,0xbd,0x27,0x14,0x00,0xb1,0xaf,0x02,0x80,0x11,0x3c,
+0x68,0x15,0x28,0x26,0x73,0x4b,0x06,0x91,0x01,0x80,0x03,0x3c,0x25,0xb0,0x02,0x3c,
+0x5c,0x10,0x63,0x24,0x18,0x03,0x42,0x34,0x02,0x00,0x07,0x24,0x18,0x00,0xb2,0xaf,
+0x10,0x00,0xb0,0xaf,0x1c,0x00,0xbf,0xaf,0x00,0x00,0x43,0xac,0x21,0x90,0xa0,0x00,
+0x39,0x00,0xc7,0x10,0xff,0x00,0x90,0x30,0x03,0x00,0x03,0x24,0x3f,0x00,0xc3,0x10,
+0x2e,0x00,0x02,0x2e,0x10,0x00,0x02,0x2e,0x0c,0x00,0x40,0x10,0x00,0x00,0x00,0x00,
+0x0f,0x00,0x04,0x3c,0xff,0xff,0x84,0x34,0x24,0x20,0x44,0x02,0x00,0x15,0x10,0x00,
+0x1c,0x00,0xbf,0x8f,0x18,0x00,0xb2,0x8f,0x14,0x00,0xb1,0x8f,0x10,0x00,0xb0,0x8f,
+0x25,0x20,0x44,0x00,0x63,0x43,0x00,0x08,0x20,0x00,0xbd,0x27,0xf5,0xff,0xc7,0x14,
+0x0f,0x00,0x04,0x3c,0x71,0x4b,0x04,0x91,0x01,0x00,0x02,0x24,0x33,0x00,0x82,0x10,
+0x02,0x00,0x82,0x28,0x38,0x00,0x40,0x14,0x00,0x00,0x00,0x00,0x38,0x00,0x86,0x10,
+0x68,0x15,0x22,0x26,0x2e,0x00,0x83,0x10,0x00,0x00,0x00,0x00,0x00,0x08,0x04,0x24,
+0x68,0x43,0x00,0x0c,0xff,0xff,0x05,0x24,0xff,0xfc,0x06,0x3c,0xff,0xff,0xc6,0x34,
+0x24,0x30,0x46,0x00,0x00,0x08,0x04,0x24,0x3d,0x43,0x00,0x0c,0xff,0xff,0x05,0x24,
+0x68,0x15,0x22,0x26,0x71,0x4b,0x44,0x90,0x01,0x00,0x03,0x24,0x07,0x00,0x83,0x10,
+0x02,0x00,0x82,0x28,0x2c,0x00,0x40,0x14,0x02,0x00,0x02,0x24,0x2c,0x00,0x82,0x10,
+0x03,0x00,0x02,0x24,0xd6,0xff,0x82,0x14,0x00,0x00,0x00,0x00,0x68,0x15,0x22,0x26,
+0x74,0x4b,0x44,0x8c,0x0f,0x00,0x05,0x3c,0x3d,0x43,0x00,0x0c,0x21,0x30,0x00,0x00,
+0x2f,0x44,0x00,0x08,0x0f,0x00,0x04,0x3c,0x25,0x00,0x02,0x2e,0xc7,0xff,0x40,0x14,
+0x03,0x00,0x03,0x24,0x1c,0x00,0xbf,0x8f,0x18,0x00,0xb2,0x8f,0x14,0x00,0xb1,0x8f,
+0x10,0x00,0xb0,0x8f,0x08,0x00,0xe0,0x03,0x20,0x00,0xbd,0x27,0xc1,0xff,0x40,0x14,
+0x00,0x00,0x00,0x00,0x1c,0x00,0xbf,0x8f,0x18,0x00,0xb2,0x8f,0x14,0x00,0xb1,0x8f,
+0x10,0x00,0xb0,0x8f,0x08,0x00,0xe0,0x03,0x20,0x00,0xbd,0x27,0x68,0x15,0x22,0x26,
+0x74,0x4b,0x44,0x8c,0x0f,0x00,0x05,0x3c,0x3d,0x43,0x00,0x0c,0x0f,0x00,0x06,0x24,
+0x46,0x44,0x00,0x08,0x00,0x08,0x04,0x24,0xcc,0xff,0x80,0x14,0x68,0x15,0x22,0x26,
+0x74,0x4b,0x44,0x8c,0x0f,0x00,0x05,0x24,0x3d,0x43,0x00,0x0c,0x0f,0x00,0x06,0x24,
+0x46,0x44,0x00,0x08,0x00,0x08,0x04,0x24,0xad,0xff,0x80,0x14,0x00,0x00,0x00,0x00,
+0x68,0x15,0x22,0x26,0x74,0x4b,0x44,0x8c,0x0f,0x00,0x05,0x24,0x3d,0x43,0x00,0x0c,
+0x21,0x30,0x00,0x00,0x2f,0x44,0x00,0x08,0x0f,0x00,0x04,0x3c,0xe8,0xff,0xbd,0x27,
+0x10,0x00,0xb0,0xaf,0x21,0x80,0x80,0x00,0x14,0x00,0xbf,0xaf,0x79,0x43,0x00,0x0c,
+0x21,0x20,0x00,0x00,0x40,0x01,0x44,0x34,0x21,0x18,0x40,0x00,0x1f,0x00,0x02,0x2e,
+0x00,0x23,0x04,0x00,0x10,0x00,0x40,0x10,0x10,0x00,0x05,0x2e,0x00,0x01,0x64,0x34,
+0x06,0x00,0xa0,0x10,0x00,0x23,0x04,0x00,0x21,0x10,0x00,0x02,0x14,0x00,0xbf,0x8f,
+0x10,0x00,0xb0,0x8f,0x08,0x00,0xe0,0x03,0x18,0x00,0xbd,0x27,0x63,0x43,0x00,0x0c,
+0xf1,0xff,0x10,0x26,0x21,0x10,0x00,0x02,0x14,0x00,0xbf,0x8f,0x10,0x00,0xb0,0x8f,
+0x08,0x00,0xe0,0x03,0x18,0x00,0xbd,0x27,0x63,0x43,0x00,0x0c,0xe2,0xff,0x10,0x26,
+0x21,0x10,0x00,0x02,0x14,0x00,0xbf,0x8f,0x10,0x00,0xb0,0x8f,0x08,0x00,0xe0,0x03,
+0x18,0x00,0xbd,0x27,0x25,0xb0,0x02,0x3c,0x27,0x38,0x05,0x00,0x21,0x40,0x82,0x00,
+0xff,0xff,0x02,0x24,0x07,0x00,0xa2,0x10,0x25,0x38,0xe6,0x00,0x00,0x00,0x02,0x8d,
+0x00,0x00,0x00,0x00,0x24,0x10,0xe2,0x00,0x00,0x00,0x02,0xad,0x08,0x00,0xe0,0x03,
+0x00,0x00,0x00,0x00,0x00,0x00,0x06,0xad,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,
+0x01,0x80,0x02,0x3c,0x25,0xb0,0x03,0x3c,0xe8,0x12,0x42,0x24,0x18,0x03,0x63,0x34,
+0xd8,0xff,0xbd,0x27,0x00,0x00,0x62,0xac,0x0f,0x00,0x02,0x3c,0x14,0x00,0xb1,0xaf,
+0xff,0xff,0x42,0x34,0x21,0x88,0xa0,0x00,0x1c,0x00,0xb3,0xaf,0x18,0x00,0xb2,0xaf,
+0x20,0x00,0xbf,0xaf,0x10,0x00,0xb0,0xaf,0x21,0x90,0xc0,0x00,0x21,0x28,0xc0,0x00,
+0x0a,0x00,0x22,0x12,0x21,0x98,0x80,0x00,0xac,0x43,0x00,0x0c,0x00,0x00,0x00,0x00,
+0x21,0x20,0x20,0x02,0x31,0x43,0x00,0x0c,0x21,0x80,0x40,0x00,0x04,0x10,0x52,0x00,
+0x27,0x28,0x11,0x00,0x25,0x28,0xa2,0x00,0x24,0x28,0xb0,0x00,0xff,0x00,0x64,0x32,
+0x20,0x00,0xbf,0x8f,0x1c,0x00,0xb3,0x8f,0x18,0x00,0xb2,0x8f,0x14,0x00,0xb1,0x8f,
+0x10,0x00,0xb0,0x8f,0x17,0x44,0x00,0x08,0x28,0x00,0xbd,0x27,0x01,0x80,0x03,0x3c,
+0x25,0xb0,0x02,0x3c,0x74,0x13,0x63,0x24,0x18,0x03,0x42,0x34,0xe0,0xff,0xbd,0x27,
+0x00,0x00,0x43,0xac,0x18,0x00,0xbf,0xaf,0x14,0x00,0xb1,0xaf,0x10,0x00,0xb0,0xaf,
+0xac,0x43,0x00,0x0c,0x21,0x88,0xa0,0x00,0x21,0x80,0x40,0x00,0x31,0x43,0x00,0x0c,
+0x21,0x20,0x20,0x02,0x24,0x80,0x11,0x02,0x06,0x10,0x50,0x00,0x18,0x00,0xbf,0x8f,
+0x14,0x00,0xb1,0x8f,0x10,0x00,0xb0,0x8f,0x08,0x00,0xe0,0x03,0x20,0x00,0xbd,0x27,
+0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,0x01,0x00,0x02,0x24,
+0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,
+0xc8,0xff,0xbd,0x27,0x2c,0x00,0xb1,0xaf,0xff,0xff,0x05,0x24,0x21,0x88,0x80,0x00,
+0x02,0x00,0x06,0x24,0x10,0x00,0xa4,0x27,0x34,0x00,0xbf,0xaf,0x30,0x00,0xb2,0xaf,
+0x97,0x45,0x00,0x0c,0x28,0x00,0xb0,0xaf,0x08,0x00,0x30,0x96,0x02,0x80,0x02,0x3c,
+0x21,0x28,0x00,0x00,0x25,0x80,0x02,0x02,0x21,0x20,0x00,0x02,0x97,0x45,0x00,0x0c,
+0x10,0x00,0x06,0x24,0x20,0x00,0x02,0x96,0x24,0x00,0x04,0x26,0x10,0x00,0xa5,0x27,
+0x03,0xff,0x42,0x30,0xc8,0x00,0x42,0x34,0x20,0x00,0x02,0xa6,0x9f,0x45,0x00,0x0c,
+0x06,0x00,0x06,0x24,0x25,0xb0,0x03,0x3c,0x50,0x00,0x62,0x34,0x00,0x00,0x44,0x8c,
+0x54,0x00,0x65,0x34,0x58,0x00,0x66,0x34,0x18,0x00,0xa4,0xaf,0x00,0x00,0xa2,0x8c,
+0x5c,0x00,0x63,0x34,0x2a,0x00,0x04,0x26,0x1c,0x00,0xa2,0xaf,0x00,0x00,0xc7,0x8c,
+0x18,0x00,0xa5,0x27,0x06,0x00,0x06,0x24,0x20,0x00,0xa7,0xaf,0x00,0x00,0x62,0x8c,
+0x1a,0x00,0x12,0x24,0x9f,0x45,0x00,0x0c,0x24,0x00,0xa2,0xaf,0x30,0x00,0x04,0x26,
+0x20,0x00,0xa5,0x27,0x9f,0x45,0x00,0x0c,0x06,0x00,0x06,0x24,0x13,0x00,0x03,0x24,
+0x14,0x00,0x23,0xae,0x0c,0x00,0x32,0xae,0x08,0x00,0x05,0x8e,0x04,0x00,0x04,0x8e,
+0xff,0xdf,0x02,0x3c,0x14,0x00,0x06,0x8e,0xff,0xff,0x42,0x34,0x10,0x00,0x07,0x8e,
+0xff,0xe0,0x03,0x24,0x24,0x28,0xa2,0x00,0x00,0x40,0x02,0x3c,0x24,0x20,0x83,0x00,
+0x25,0x28,0xa2,0x00,0xff,0x81,0x03,0x24,0xfe,0xff,0x02,0x3c,0x24,0x30,0xc3,0x00,
+0xff,0xff,0x42,0x34,0x00,0x12,0x84,0x34,0x00,0x80,0x03,0x3c,0x24,0x20,0x82,0x00,
+0x25,0x38,0xe3,0x00,0x00,0x26,0xc6,0x34,0x80,0x00,0xa5,0x34,0x20,0x00,0x02,0x24,
+0x00,0x00,0x12,0xa6,0x10,0x00,0x07,0xae,0x02,0x00,0x02,0xa2,0x14,0x00,0x06,0xae,
+0x04,0x00,0x04,0xae,0x08,0x00,0x05,0xae,0x34,0x00,0xbf,0x8f,0x30,0x00,0xb2,0x8f,
+0x2c,0x00,0xb1,0x8f,0x28,0x00,0xb0,0x8f,0x08,0x00,0xe0,0x03,0x38,0x00,0xbd,0x27,
+0x93,0x45,0x00,0x08,0xff,0x00,0xa5,0x30,0x00,0x00,0x85,0xa0,0xff,0xff,0xc6,0x24,
+0x01,0x00,0x84,0x24,0xfc,0xff,0xc0,0x14,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,
+0x00,0x00,0x00,0x00,0x05,0x00,0xc0,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x85,0xac,
+0xff,0xff,0xc6,0x24,0xfd,0xff,0xc0,0x14,0x04,0x00,0x84,0x24,0x08,0x00,0xe0,0x03,
+0x00,0x00,0x00,0x00,0x21,0x38,0x80,0x00,0x08,0x00,0xc0,0x10,0xff,0xff,0xc3,0x24,
+0xff,0xff,0x06,0x24,0x00,0x00,0xa2,0x90,0xff,0xff,0x63,0x24,0x01,0x00,0xa5,0x24,
+0x00,0x00,0xe2,0xa0,0xfb,0xff,0x66,0x14,0x01,0x00,0xe7,0x24,0x08,0x00,0xe0,0x03,
+0x21,0x10,0x80,0x00,0x21,0x38,0x80,0x00,0x08,0x00,0xc0,0x10,0xff,0xff,0xc3,0x24,
+0xff,0xff,0x06,0x24,0x00,0x00,0xa2,0x8c,0xff,0xff,0x63,0x24,0x04,0x00,0xa5,0x24,
+0x00,0x00,0xe2,0xac,0xfb,0xff,0x66,0x14,0x04,0x00,0xe7,0x24,0x08,0x00,0xe0,0x03,
+0x21,0x10,0x80,0x00,0x2b,0x10,0xa4,0x00,0x0d,0x00,0x40,0x14,0xff,0xff,0x02,0x24,
+0xff,0xff,0xc6,0x24,0x08,0x00,0xc2,0x10,0x21,0x18,0x80,0x00,0xff,0xff,0x07,0x24,
+0x00,0x00,0xa2,0x90,0xff,0xff,0xc6,0x24,0x01,0x00,0xa5,0x24,0x00,0x00,0x62,0xa0,
+0xfb,0xff,0xc7,0x14,0x01,0x00,0x63,0x24,0x08,0x00,0xe0,0x03,0x21,0x10,0x80,0x00,
+0x21,0x28,0xa6,0x00,0x21,0x18,0x86,0x00,0xff,0xff,0xc6,0x24,0xfa,0xff,0xc2,0x10,
+0x00,0x00,0x00,0x00,0xff,0xff,0x07,0x24,0xff,0xff,0xa5,0x24,0x00,0x00,0xa2,0x90,
+0xff,0xff,0x63,0x24,0xff,0xff,0xc6,0x24,0xfb,0xff,0xc7,0x14,0x00,0x00,0x62,0xa0,
+0x08,0x00,0xe0,0x03,0x21,0x10,0x80,0x00,0x0c,0x00,0xc0,0x10,0x00,0x00,0x00,0x00,
+0x00,0x00,0x82,0x90,0x00,0x00,0xa3,0x90,0x01,0x00,0x84,0x24,0x23,0x10,0x43,0x00,
+0x00,0x16,0x02,0x00,0x03,0x16,0x02,0x00,0x04,0x00,0x40,0x14,0x01,0x00,0xa5,0x24,
+0xff,0xff,0xc6,0x24,0xf6,0xff,0xc0,0x14,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,
+0x21,0x10,0xc0,0x00,0xea,0x45,0x00,0x08,0x21,0x18,0x86,0x00,0x00,0x00,0x82,0x90,
+0x00,0x00,0x00,0x00,0x04,0x00,0x45,0x10,0x00,0x00,0x00,0x00,0x01,0x00,0x84,0x24,
+0xfa,0xff,0x83,0x14,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,0x21,0x10,0x80,0x00,
+0x09,0x00,0xc0,0x10,0xff,0xff,0xc3,0x24,0xff,0x00,0xa5,0x30,0xff,0xff,0x06,0x24,
+0x00,0x00,0x82,0x90,0xff,0xff,0x63,0x24,0x05,0x00,0x45,0x10,0x01,0x00,0x84,0x24,
+0xfb,0xff,0x66,0x14,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,
+0x08,0x00,0xe0,0x03,0xff,0xff,0x82,0x24,0x21,0x38,0x00,0x00,0x1f,0x00,0xc0,0x10,
+0x21,0x18,0x00,0x00,0x02,0x80,0x02,0x3c,0x80,0x95,0x4b,0x24,0x00,0x00,0x87,0x90,
+0x00,0x00,0xa3,0x90,0xff,0xff,0xc6,0x24,0x01,0x00,0x84,0x24,0x21,0x10,0xeb,0x00,
+0x16,0x00,0xe0,0x10,0x01,0x00,0xa5,0x24,0x14,0x00,0x60,0x10,0x21,0x48,0x6b,0x00,
+0x10,0x00,0xe3,0x10,0x20,0x00,0xe8,0x24,0x00,0x00,0x42,0x90,0x00,0x00,0x00,0x00,
+0x01,0x00,0x42,0x30,0x02,0x00,0x40,0x10,0x20,0x00,0x6a,0x24,0xff,0x00,0x07,0x31,
+0x00,0x00,0x22,0x91,0x00,0x00,0x00,0x00,0x01,0x00,0x42,0x30,0x02,0x00,0x40,0x10,
+0xff,0x00,0xe7,0x30,0xff,0x00,0x43,0x31,0xff,0x00,0x63,0x30,0x03,0x00,0xe3,0x14,
+0x00,0x00,0x00,0x00,0xe5,0xff,0xc0,0x14,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,
+0x23,0x10,0xe3,0x00,0x21,0x18,0x80,0x00,0x00,0x00,0xa2,0x90,0x01,0x00,0xa5,0x24,
+0x00,0x00,0x82,0xa0,0xfc,0xff,0x40,0x14,0x01,0x00,0x84,0x24,0x08,0x00,0xe0,0x03,
+0x21,0x10,0x60,0x00,0x21,0x38,0x80,0x00,0xff,0xff,0x03,0x24,0xff,0xff,0xc6,0x24,
+0x06,0x00,0xc3,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0xa2,0x90,0x01,0x00,0xa5,0x24,
+0x00,0x00,0x82,0xa0,0xf9,0xff,0x40,0x14,0x01,0x00,0x84,0x24,0x08,0x00,0xe0,0x03,
+0x21,0x10,0xe0,0x00,0x00,0x00,0x82,0x80,0x39,0x46,0x00,0x08,0x21,0x18,0x80,0x00,
+0x01,0x00,0x84,0x24,0x00,0x00,0x82,0x80,0x00,0x00,0x00,0x00,0xfc,0xff,0x40,0x14,
+0x00,0x00,0x00,0x00,0x00,0x00,0xa2,0x90,0x01,0x00,0xa5,0x24,0x00,0x00,0x82,0xa0,
+0xfc,0xff,0x40,0x14,0x01,0x00,0x84,0x24,0x08,0x00,0xe0,0x03,0x21,0x10,0x60,0x00,
+0x12,0x00,0xc0,0x10,0x21,0x18,0x80,0x00,0x00,0x00,0x82,0x80,0x4a,0x46,0x00,0x08,
+0x00,0x00,0x00,0x00,0x01,0x00,0x84,0x24,0x00,0x00,0x82,0x80,0x00,0x00,0x00,0x00,
+0xfc,0xff,0x40,0x14,0x00,0x00,0x00,0x00,0x00,0x00,0xa2,0x90,0x01,0x00,0xa5,0x24,
+0x00,0x00,0x82,0xa0,0x05,0x00,0x40,0x10,0x01,0x00,0x84,0x24,0xff,0xff,0xc6,0x24,
+0xf9,0xff,0xc0,0x14,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xa0,0x08,0x00,0xe0,0x03,
+0x21,0x10,0x60,0x00,0x00,0x00,0x83,0x90,0x00,0x00,0xa2,0x90,0x01,0x00,0x84,0x24,
+0x23,0x10,0x62,0x00,0x00,0x16,0x02,0x00,0x03,0x16,0x02,0x00,0x03,0x00,0x40,0x14,
+0x01,0x00,0xa5,0x24,0xf7,0xff,0x60,0x14,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,
+0x00,0x00,0x00,0x00,0x21,0x10,0x00,0x00,0x0b,0x00,0xc0,0x10,0x00,0x00,0x00,0x00,
+0x00,0x00,0xa2,0x90,0x00,0x00,0x83,0x90,0xff,0xff,0xc6,0x24,0x23,0x10,0x62,0x00,
+0x00,0x16,0x02,0x00,0x03,0x16,0x02,0x00,0x03,0x00,0x40,0x14,0x01,0x00,0xa5,0x24,
+0xf5,0xff,0x60,0x14,0x01,0x00,0x84,0x24,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,
+0x00,0x00,0x83,0x80,0x00,0x2e,0x05,0x00,0x21,0x10,0x80,0x00,0x7b,0x46,0x00,0x08,
+0x03,0x2e,0x05,0x00,0x07,0x00,0x60,0x10,0x01,0x00,0x42,0x24,0x00,0x00,0x43,0x80,
+0x00,0x00,0x00,0x00,0xfb,0xff,0x65,0x14,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,
+0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x00,0x00,0x00,0x82,0x80,
+0x87,0x46,0x00,0x08,0x21,0x18,0x80,0x00,0x01,0x00,0x63,0x24,0x00,0x00,0x62,0x80,
+0x00,0x00,0x00,0x00,0xfc,0xff,0x40,0x14,0x23,0x10,0x64,0x00,0x08,0x00,0xe0,0x03,
+0x00,0x00,0x00,0x00,0xe0,0xff,0xbd,0x27,0x10,0x00,0xb0,0xaf,0x21,0x80,0xa0,0x00,
+0x14,0x00,0xb1,0xaf,0x18,0x00,0xbf,0xaf,0x21,0x88,0x80,0x00,0x81,0x46,0x00,0x0c,
+0x00,0x86,0x10,0x00,0x21,0x18,0x51,0x00,0x03,0x86,0x10,0x00,0x00,0x00,0x62,0x80,
+0x00,0x00,0x00,0x00,0x0a,0x00,0x50,0x10,0x21,0x10,0x60,0x00,0xff,0xff,0x63,0x24,
+0x2b,0x10,0x71,0x00,0xf9,0xff,0x40,0x10,0x21,0x10,0x00,0x00,0x18,0x00,0xbf,0x8f,
+0x14,0x00,0xb1,0x8f,0x10,0x00,0xb0,0x8f,0x08,0x00,0xe0,0x03,0x20,0x00,0xbd,0x27,
+0x18,0x00,0xbf,0x8f,0x14,0x00,0xb1,0x8f,0x10,0x00,0xb0,0x8f,0x08,0x00,0xe0,0x03,
+0x20,0x00,0xbd,0x27,0x21,0x30,0x80,0x00,0x0d,0x00,0xa0,0x10,0xff,0xff,0xa3,0x24,
+0x00,0x00,0x82,0x80,0x00,0x00,0x00,0x00,0x09,0x00,0x40,0x10,0x00,0x00,0x00,0x00,
+0xff,0xff,0x05,0x24,0xff,0xff,0x63,0x24,0x05,0x00,0x65,0x10,0x01,0x00,0xc6,0x24,
+0x00,0x00,0xc2,0x80,0x00,0x00,0x00,0x00,0xfa,0xff,0x40,0x14,0x00,0x00,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x23,0x10,0xc4,0x00,0x00,0x00,0x82,0x90,0x00,0x00,0x00,0x00,
+0x19,0x00,0x40,0x10,0x21,0x40,0x00,0x00,0x00,0x00,0xa9,0x80,0x00,0x00,0x00,0x00,
+0x17,0x00,0x20,0x11,0x21,0x30,0xa0,0x00,0x00,0x3e,0x02,0x00,0x03,0x3e,0x07,0x00,
+0x21,0x18,0x20,0x01,0x15,0x00,0xe3,0x10,0x00,0x00,0x00,0x00,0x01,0x00,0xc6,0x24,
+0x00,0x00,0xc2,0x90,0x00,0x00,0x00,0x00,0x00,0x1e,0x02,0x00,0x03,0x1e,0x03,0x00,
+0xf8,0xff,0x60,0x14,0x00,0x16,0x02,0x00,0x03,0x16,0x02,0x00,0x06,0x00,0x40,0x10,
+0x00,0x00,0x00,0x00,0x01,0x00,0x84,0x24,0x00,0x00,0x82,0x90,0x00,0x00,0x00,0x00,
+0xeb,0xff,0x40,0x14,0x01,0x00,0x08,0x25,0x08,0x00,0xe0,0x03,0x21,0x10,0x00,0x01,
+0x00,0x00,0xa2,0x90,0xcc,0x46,0x00,0x08,0x00,0x16,0x02,0x00,0x00,0x00,0xc2,0x90,
+0xcc,0x46,0x00,0x08,0x00,0x16,0x02,0x00,0x00,0x00,0x87,0x90,0x00,0x00,0x00,0x00,
+0x14,0x00,0xe0,0x10,0x21,0x10,0x80,0x00,0x00,0x00,0xa4,0x90,0x00,0x00,0x00,0x00,
+0x00,0x1e,0x04,0x00,0x03,0x1e,0x03,0x00,0x09,0x00,0x60,0x10,0x21,0x30,0xa0,0x00,
+0x00,0x3e,0x07,0x00,0x03,0x3e,0x07,0x00,0x0b,0x00,0xe3,0x10,0x01,0x00,0xc6,0x24,
+0x00,0x00,0xc3,0x80,0x00,0x00,0x00,0x00,0xfb,0xff,0x60,0x14,0x00,0x00,0x00,0x00,
+0x01,0x00,0x42,0x24,0x00,0x00,0x47,0x90,0x00,0x00,0x00,0x00,0xf0,0xff,0xe0,0x14,
+0x00,0x00,0x00,0x00,0x21,0x10,0x00,0x00,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,
+0xe0,0xff,0xbd,0x27,0x14,0x00,0xb1,0xaf,0x10,0x00,0xb0,0xaf,0x18,0x00,0xbf,0xaf,
+0x21,0x80,0x80,0x00,0x1d,0x00,0x80,0x10,0x21,0x88,0xa0,0x00,0xb8,0x46,0x00,0x0c,
+0x21,0x20,0x00,0x02,0x21,0x80,0x02,0x02,0x00,0x00,0x02,0x82,0x21,0x28,0x20,0x02,
+0x21,0x20,0x00,0x02,0x22,0x00,0x40,0x10,0x21,0x18,0x00,0x00,0xdc,0x46,0x00,0x0c,
+0x00,0x00,0x00,0x00,0x05,0x00,0x40,0x10,0x21,0x18,0x40,0x00,0x00,0x00,0x42,0x80,
+0x00,0x00,0x00,0x00,0x0a,0x00,0x40,0x14,0x00,0x00,0x00,0x00,0x02,0x80,0x02,0x3c,
+0xa8,0x96,0x43,0xac,0x21,0x18,0x00,0x02,0x18,0x00,0xbf,0x8f,0x14,0x00,0xb1,0x8f,
+0x10,0x00,0xb0,0x8f,0x21,0x10,0x60,0x00,0x08,0x00,0xe0,0x03,0x20,0x00,0xbd,0x27,
+0x00,0x00,0x60,0xa0,0x0d,0x47,0x00,0x08,0x01,0x00,0x63,0x24,0x02,0x80,0x02,0x3c,
+0xa8,0x96,0x50,0x8c,0x00,0x00,0x00,0x00,0xf3,0xff,0x00,0x12,0x21,0x18,0x00,0x00,
+0xb8,0x46,0x00,0x0c,0x21,0x20,0x00,0x02,0x21,0x80,0x02,0x02,0x00,0x00,0x02,0x82,
+0x21,0x28,0x20,0x02,0x21,0x20,0x00,0x02,0xe0,0xff,0x40,0x14,0x21,0x18,0x00,0x00,
+0x18,0x00,0xbf,0x8f,0x14,0x00,0xb1,0x8f,0x10,0x00,0xb0,0x8f,0x02,0x80,0x02,0x3c,
+0xa8,0x96,0x40,0xac,0x20,0x00,0xbd,0x27,0x08,0x00,0xe0,0x03,0x21,0x10,0x60,0x00,
+0xe0,0xff,0xbd,0x27,0x18,0x00,0xb2,0xaf,0x14,0x00,0xb1,0xaf,0x1c,0x00,0xbf,0xaf,
+0x10,0x00,0xb0,0xaf,0x00,0x00,0x90,0x8c,0x21,0x90,0x80,0x00,0x21,0x88,0xa0,0x00,
+0x21,0x18,0x00,0x00,0x0f,0x00,0x00,0x12,0x21,0x20,0x00,0x02,0xb8,0x46,0x00,0x0c,
+0x00,0x00,0x00,0x00,0x21,0x80,0x02,0x02,0x00,0x00,0x02,0x82,0x21,0x28,0x20,0x02,
+0x21,0x20,0x00,0x02,0x07,0x00,0x40,0x10,0x21,0x18,0x00,0x00,0xdc,0x46,0x00,0x0c,
+0x00,0x00,0x00,0x00,0x21,0x18,0x40,0x00,0x09,0x00,0x40,0x14,0x00,0x00,0x42,0xae,
+0x21,0x18,0x00,0x02,0x1c,0x00,0xbf,0x8f,0x18,0x00,0xb2,0x8f,0x14,0x00,0xb1,0x8f,
+0x10,0x00,0xb0,0x8f,0x21,0x10,0x60,0x00,0x08,0x00,0xe0,0x03,0x20,0x00,0xbd,0x27,
+0x00,0x00,0x42,0x80,0x00,0x00,0x00,0x00,0xf5,0xff,0x40,0x10,0x01,0x00,0x64,0x24,
+0x00,0x00,0x60,0xa0,0x46,0x47,0x00,0x08,0x00,0x00,0x44,0xae,0xd8,0xff,0xbd,0x27,
+0x14,0x00,0xb1,0xaf,0x21,0x88,0x80,0x00,0x21,0x20,0xa0,0x00,0x1c,0x00,0xb3,0xaf,
+0x18,0x00,0xb2,0xaf,0x20,0x00,0xbf,0xaf,0x10,0x00,0xb0,0xaf,0x81,0x46,0x00,0x0c,
+0x21,0x98,0xa0,0x00,0x21,0x90,0x40,0x00,0x08,0x00,0x40,0x16,0x21,0x10,0x20,0x02,
+0x20,0x00,0xbf,0x8f,0x1c,0x00,0xb3,0x8f,0x18,0x00,0xb2,0x8f,0x14,0x00,0xb1,0x8f,
+0x10,0x00,0xb0,0x8f,0x08,0x00,0xe0,0x03,0x28,0x00,0xbd,0x27,0x81,0x46,0x00,0x0c,
+0x21,0x20,0x20,0x02,0x21,0x80,0x40,0x00,0x2a,0x10,0x52,0x00,0x0a,0x00,0x40,0x14,
+0x00,0x00,0x00,0x00,0x21,0x20,0x20,0x02,0x21,0x28,0x60,0x02,0x21,0x30,0x40,0x02,
+0xd4,0x45,0x00,0x0c,0xff,0xff,0x10,0x26,0x0b,0x00,0x40,0x10,0x2a,0x18,0x12,0x02,
+0xf8,0xff,0x60,0x10,0x01,0x00,0x31,0x26,0x20,0x00,0xbf,0x8f,0x1c,0x00,0xb3,0x8f,
+0x18,0x00,0xb2,0x8f,0x14,0x00,0xb1,0x8f,0x10,0x00,0xb0,0x8f,0x21,0x10,0x00,0x00,
+0x08,0x00,0xe0,0x03,0x28,0x00,0xbd,0x27,0x62,0x47,0x00,0x08,0x21,0x10,0x20,0x02,
+0x01,0x80,0x02,0x3c,0xc0,0xff,0xbd,0x27,0x08,0x1e,0x44,0x24,0x25,0xb0,0x02,0x3c,
+0x28,0x00,0xb4,0xaf,0x02,0x80,0x03,0x3c,0x25,0xb0,0x14,0x3c,0x18,0x03,0x42,0x34,
+0x38,0x00,0xbe,0xaf,0x34,0x00,0xb7,0xaf,0x30,0x00,0xb6,0xaf,0x2c,0x00,0xb5,0xaf,
+0x24,0x00,0xb3,0xaf,0x3c,0x00,0xbf,0xaf,0x20,0x00,0xb2,0xaf,0x1c,0x00,0xb1,0xaf,
+0x18,0x00,0xb0,0xaf,0x68,0x15,0x73,0x24,0x00,0x00,0x44,0xac,0x02,0x80,0x16,0x3c,
+0x02,0x80,0x15,0x3c,0xc4,0x02,0x9e,0x36,0x64,0x03,0x97,0x36,0x01,0x80,0x04,0x3c,
+0x08,0x1e,0x82,0x24,0x18,0x03,0x83,0x36,0x00,0x00,0x62,0xac,0xa0,0x02,0x87,0x36,
+0x00,0x00,0xe4,0x8c,0xd8,0x63,0x63,0x8e,0xff,0x0f,0x02,0x3c,0xff,0xff,0x46,0x34,
+0x24,0x80,0x86,0x00,0x01,0x00,0x05,0x3c,0x01,0x00,0x63,0x24,0x2b,0x10,0xb0,0x00,
+0x07,0x00,0x40,0x10,0xd8,0x63,0x63,0xae,0xa4,0x02,0x82,0x36,0x00,0x00,0x51,0x8c,
+0x00,0xb0,0x03,0x3c,0x25,0x80,0x03,0x02,0x00,0x00,0x11,0xae,0x00,0x00,0xe0,0xac,
+0xb0,0x02,0x84,0x36,0x00,0x00,0x82,0x8c,0x00,0x00,0x00,0x00,0x24,0x80,0x46,0x00,
+0x2b,0x18,0xb0,0x00,0x08,0x00,0x60,0x10,0xc0,0x02,0x82,0x36,0x00,0xb0,0x02,0x3c,
+0x25,0x80,0x02,0x02,0x00,0x00,0x11,0x8e,0xb4,0x02,0x82,0x36,0x00,0x00,0x51,0xac,
+0x00,0x00,0x80,0xac,0xc0,0x02,0x82,0x36,0x00,0x00,0x50,0x8c,0xff,0x00,0x08,0x3c,
+0xff,0xff,0x02,0x35,0x2b,0x10,0x50,0x00,0x47,0x00,0x40,0x10,0x00,0x00,0x00,0x00,
+0x00,0x00,0x82,0x8e,0x00,0xff,0x06,0x3c,0xac,0x02,0x84,0x36,0x01,0x00,0x45,0x24,
+0xbc,0x02,0x83,0x36,0xff,0x00,0xc2,0x34,0x00,0xfd,0x07,0x3c,0x00,0x00,0x85,0xac,
+0x00,0x00,0x70,0xac,0x24,0x18,0x02,0x02,0x07,0x00,0xe2,0x34,0x00,0x00,0x85,0x8c,
+0x52,0x03,0x62,0x10,0x25,0xb0,0x12,0x3c,0x2b,0x10,0x43,0x00,0xa2,0x00,0x40,0x14,
+0xa4,0x00,0xe2,0x34,0x00,0xf8,0x04,0x3c,0x15,0x00,0x82,0x34,0x57,0x03,0x62,0x10,
+0x2b,0x10,0x43,0x00,0xc8,0x00,0x40,0x14,0x00,0xf9,0x05,0x3c,0x00,0xf0,0x05,0x3c,
+0x20,0x00,0xa2,0x34,0x67,0x03,0x62,0x10,0x2b,0x10,0x43,0x00,0x20,0x01,0x40,0x14,
+0x10,0x00,0x82,0x34,0x70,0x03,0x65,0x10,0x2b,0x10,0xa3,0x00,0xc8,0x01,0x40,0x14,
+0x02,0x00,0xa2,0x34,0x00,0xd0,0x02,0x3c,0x2a,0x02,0x62,0x10,0x2b,0x10,0x43,0x00,
+0xaf,0x02,0x40,0x14,0x00,0xe0,0x02,0x3c,0x00,0xc0,0x02,0x3c,0xbb,0x03,0x62,0x10,
+0xff,0x00,0x03,0x3c,0x00,0xf0,0x02,0x3c,0x24,0x30,0x02,0x02,0x18,0x00,0xc2,0x10,
+0x02,0x1d,0x10,0x00,0x00,0x70,0x05,0x3c,0x24,0x10,0x05,0x02,0x02,0x4f,0x02,0x00,
+0x0f,0x00,0x02,0x3c,0xff,0xff,0x42,0x34,0x00,0x50,0x07,0x3c,0xff,0x00,0x68,0x30,
+0xff,0x00,0x04,0x32,0x96,0x01,0xc7,0x10,0x24,0x18,0x02,0x02,0x2b,0x10,0xe6,0x00,
+0x8a,0x01,0x40,0x14,0x00,0x80,0x02,0x3c,0x00,0x20,0x02,0x3c,0x1a,0x03,0xc2,0x10,
+0x2b,0x10,0x46,0x00,0x82,0x02,0x40,0x14,0x00,0x30,0x02,0x3c,0x17,0x03,0xc0,0x10,
+0x80,0x10,0x08,0x00,0x00,0x10,0x02,0x3c,0x14,0x03,0xc2,0x10,0x80,0x10,0x08,0x00,
+0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,
+0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,0x00,0x00,0xe2,0x92,0x25,0xb0,0x07,0x3c,
+0xc8,0x7d,0xc2,0xa2,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,
+0xc8,0x7d,0xc2,0x92,0x00,0x00,0x00,0x00,0x01,0x00,0x42,0x30,0x4e,0x00,0x40,0x10,
+0x02,0x80,0x03,0x3c,0x00,0x40,0x62,0x8e,0xf0,0xff,0x03,0x24,0xd7,0x42,0x60,0xa2,
+0x24,0x10,0x43,0x00,0x01,0x00,0x42,0x34,0x00,0x40,0x62,0xae,0xc8,0x7d,0xc2,0x92,
+0x00,0x00,0x00,0x00,0x02,0x00,0x42,0x30,0x3d,0x00,0x40,0x10,0x0f,0xff,0x03,0x24,
+0x00,0x40,0x62,0x8e,0x00,0x00,0x00,0x00,0x24,0x10,0x43,0x00,0x10,0x00,0x42,0x34,
+0x00,0x40,0x62,0xae,0xc8,0x7d,0xc2,0x92,0x00,0x00,0x00,0x00,0x04,0x00,0x42,0x30,
+0x30,0x00,0x40,0x10,0xff,0xf0,0x03,0x24,0x00,0x40,0x62,0x8e,0x00,0x00,0x00,0x00,
+0x24,0x10,0x43,0x00,0x00,0x01,0x42,0x34,0x25,0xb0,0x05,0x3c,0x00,0x40,0x62,0xae,
+0x4c,0x00,0xa3,0x34,0x00,0x00,0x62,0x90,0x00,0x00,0x00,0x00,0x03,0x00,0x42,0x30,
+0x05,0x00,0x40,0x14,0xff,0xff,0x02,0x3c,0x00,0x40,0x63,0x8e,0xff,0x0f,0x42,0x34,
+0x24,0x18,0x62,0x00,0x00,0x40,0x63,0xae,0x00,0x7b,0xa4,0x8e,0x01,0x80,0x06,0x3c,
+0x08,0x1f,0xc2,0x24,0x18,0x03,0xa3,0x34,0x00,0x7b,0xa6,0x26,0x00,0x00,0x62,0xac,
+0x10,0x00,0x86,0x10,0x02,0x80,0x02,0x3c,0xbf,0x00,0xb2,0x34,0x68,0x15,0x51,0x24,
+0x21,0x80,0xc0,0x00,0x00,0x00,0x42,0x92,0x00,0x00,0x00,0x00,0x04,0x00,0x42,0x2c,
+0x09,0x00,0x40,0x10,0x02,0x80,0x07,0x3c,0x98,0x65,0x24,0x8e,0x8b,0x07,0x00,0x0c,
+0x00,0x00,0x00,0x00,0x00,0x7b,0xa2,0x8e,0x00,0x00,0x00,0x00,0xf5,0xff,0x50,0x14,
+0x00,0x00,0x00,0x00,0x02,0x80,0x07,0x3c,0x08,0x08,0xe4,0x24,0x21,0x28,0x00,0x00,
+0x21,0x30,0x00,0x00,0x31,0x1c,0x00,0x0c,0x21,0x38,0x00,0x00,0x9a,0x47,0x00,0x08,
+0x01,0x80,0x04,0x3c,0x00,0x40,0x62,0x8e,0x30,0x48,0x00,0x08,0x24,0x10,0x43,0x00,
+0x00,0x40,0x62,0x8e,0x04,0x43,0x64,0x92,0x24,0x10,0x43,0x00,0x00,0x40,0x62,0xae,
+0x27,0x48,0x00,0x08,0x04,0x43,0x64,0xae,0x68,0x15,0x66,0x24,0x00,0x40,0xc2,0x8c,
+0xd7,0x42,0xc4,0x90,0xf0,0xff,0x03,0x24,0x24,0x10,0x43,0x00,0xb3,0xff,0x80,0x14,
+0x00,0x40,0xc2,0xac,0x1c,0x00,0x04,0x24,0x58,0x0c,0xe5,0x34,0x50,0x0c,0xe3,0x34,
+0x01,0x00,0x02,0x24,0xd7,0x42,0xc2,0xa0,0x00,0x00,0x64,0xa0,0x00,0x00,0xa4,0xa0,
+0x1d,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0xb2,0x02,0x62,0x10,0x2b,0x10,0x43,0x00,
+0x3f,0x00,0x40,0x14,0xaf,0x00,0xe2,0x34,0x20,0x00,0xe2,0x34,0xc0,0x02,0x62,0x10,
+0x2b,0x10,0x43,0x00,0xe3,0x00,0x40,0x14,0x29,0x00,0xe2,0x34,0x15,0x00,0xe2,0x34,
+0x0c,0x03,0x62,0x10,0x2b,0x10,0x43,0x00,0x9d,0x01,0x40,0x14,0x17,0x00,0xe2,0x34,
+0x09,0x00,0xe2,0x34,0xd8,0x03,0x62,0x10,0x2b,0x10,0x62,0x00,0x81,0x02,0x40,0x14,
+0x14,0x00,0xe2,0x34,0x64,0xff,0x62,0x14,0x00,0xf0,0x02,0x3c,0xff,0x00,0x07,0x3c,
+0x00,0xff,0xe7,0x34,0x24,0x10,0x07,0x02,0x7a,0xff,0x40,0x10,0xc0,0x02,0x82,0x36,
+0x04,0x43,0x64,0x92,0xff,0x00,0x02,0x3c,0x24,0x10,0x02,0x02,0x00,0xff,0x03,0x32,
+0x02,0x14,0x02,0x00,0x02,0x1a,0x03,0x00,0xfb,0xff,0x45,0x24,0x1c,0x43,0x62,0xa2,
+0x00,0x01,0x84,0x34,0xfb,0xff,0x66,0x24,0xc0,0x02,0x82,0x36,0x04,0x43,0x64,0xae,
+0x1d,0x43,0x65,0xa2,0x1f,0x43,0x66,0xa2,0x1e,0x43,0x63,0xa2,0x00,0x00,0x40,0xac,
+0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0x05,0x00,0xa2,0x34,0x91,0x02,0x62,0x10,
+0x2b,0x10,0x43,0x00,0x8e,0x00,0x40,0x14,0x00,0x00,0x00,0x00,0xde,0x02,0x65,0x10,
+0x2b,0x10,0xa3,0x00,0x32,0x01,0x40,0x14,0x02,0x00,0xa2,0x34,0x17,0x00,0x82,0x34,
+0x61,0x04,0x62,0x10,0x2b,0x10,0x62,0x00,0xa9,0x03,0x40,0x14,0x18,0x00,0x82,0x34,
+0x3d,0xff,0x62,0x14,0x00,0xf0,0x02,0x3c,0x74,0x0b,0x00,0x0c,0x00,0x00,0x00,0x00,
+0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,
+0xa8,0x02,0x62,0x10,0x2b,0x10,0x43,0x00,0x95,0x00,0x40,0x14,0x0c,0x00,0xc2,0x34,
+0xaa,0x00,0xe2,0x34,0xdc,0x02,0x62,0x10,0x2b,0x10,0x43,0x00,0xd9,0x00,0x40,0x14,
+0xac,0x00,0xe2,0x34,0xa6,0x00,0xe2,0x34,0x1c,0x04,0x62,0x10,0x2b,0x10,0x62,0x00,
+0x69,0x03,0x40,0x14,0xa7,0x00,0xe2,0x34,0x27,0xff,0x62,0x14,0x00,0xf0,0x02,0x3c,
+0x00,0xff,0x02,0x32,0xff,0x00,0x04,0x3c,0x02,0x8a,0x02,0x00,0x24,0x18,0x04,0x02,
+0x01,0x00,0x02,0x24,0xa6,0x04,0x22,0x12,0x02,0x1c,0x03,0x00,0x02,0x00,0x02,0x24,
+0xc9,0x04,0x22,0x12,0x03,0x00,0x02,0x24,0xdf,0x04,0x22,0x12,0x04,0x00,0x02,0x24,
+0xd1,0x04,0x22,0x12,0x08,0x00,0x02,0x24,0x2e,0x05,0x22,0x12,0x09,0x00,0x02,0x24,
+0x1e,0x05,0x22,0x12,0x0a,0x00,0x02,0x24,0x0e,0x05,0x22,0x12,0x0b,0x00,0x02,0x24,
+0xfe,0x04,0x22,0x12,0x0c,0x00,0x02,0x24,0x5e,0x05,0x22,0x12,0x0d,0x00,0x02,0x24,
+0x4e,0x05,0x22,0x12,0x0e,0x00,0x02,0x24,0x3e,0x05,0x22,0x12,0x0f,0x00,0x02,0x24,
+0x2e,0x05,0x22,0x12,0x10,0x00,0x02,0x24,0x22,0xff,0x22,0x16,0xc0,0x02,0x82,0x36,
+0xc0,0x10,0x03,0x00,0x21,0x10,0x43,0x00,0x80,0x10,0x02,0x00,0x21,0x10,0x43,0x00,
+0x80,0x10,0x02,0x00,0x21,0x10,0x53,0x00,0x4c,0x51,0x43,0x94,0x48,0x51,0x44,0x94,
+0x25,0xb0,0x06,0x3c,0x00,0x1c,0x03,0x00,0x21,0x20,0x83,0x00,0x00,0x00,0xc4,0xaf,
+0x58,0x51,0x45,0x8c,0x54,0x51,0x43,0x8c,0x50,0x51,0x44,0x94,0xc8,0x02,0xc6,0x34,
+0x21,0x18,0x65,0x00,0x00,0x1c,0x03,0x00,0x21,0x20,0x83,0x00,0xc0,0x02,0x82,0x36,
+0x00,0x00,0xc4,0xac,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,
+0x66,0x02,0x62,0x10,0x2b,0x10,0x43,0x00,0xbf,0x00,0x40,0x14,0x12,0x00,0x82,0x34,
+0x00,0xf1,0x04,0x3c,0x01,0x00,0x82,0x34,0xc1,0x02,0x62,0x10,0x2b,0x10,0x43,0x00,
+0xb7,0x01,0x40,0x14,0x02,0x00,0x82,0x34,0xe3,0xfe,0x64,0x14,0x00,0xf0,0x02,0x3c,
+0xff,0x00,0x04,0x3c,0x00,0xff,0x84,0x34,0x24,0x10,0x04,0x02,0x02,0x8a,0x02,0x00,
+0x80,0x1a,0x11,0x00,0x00,0xf4,0x63,0x24,0x94,0x00,0x82,0x36,0x00,0x00,0x51,0xa4,
+0x26,0xb0,0x04,0x3c,0x42,0x89,0x03,0x00,0x98,0x00,0x86,0x36,0xff,0x01,0x02,0x24,
+0x10,0x00,0x03,0x24,0x9a,0x00,0x85,0x36,0x00,0x00,0xa2,0xa4,0x7c,0x00,0x89,0x34,
+0x00,0x00,0xc3,0xa4,0x01,0x00,0x02,0x24,0x04,0x00,0x03,0x24,0x96,0x00,0x87,0x36,
+0x7a,0x00,0x84,0x34,0xb0,0x03,0x88,0x36,0x25,0xb0,0x06,0x3c,0x00,0x00,0xe2,0xa4,
+0x44,0x00,0xc6,0x34,0x00,0x00,0x83,0xa0,0x00,0x00,0x11,0xad,0x00,0x00,0x31,0xa5,
+0x00,0x00,0xc3,0x94,0xff,0xfd,0x02,0x24,0x24,0x18,0x62,0x00,0x00,0x00,0xc3,0xa4,
+0x00,0x00,0xc2,0x94,0x00,0x00,0x00,0x00,0x00,0x02,0x42,0x34,0x00,0x00,0xc2,0xa4,
+0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,
+0x65,0x01,0x67,0x10,0x2b,0x10,0xe3,0x00,0xc5,0x00,0x40,0x14,0x02,0x00,0xe2,0x34,
+0x07,0x00,0xa2,0x34,0xfc,0x02,0x62,0x10,0x2b,0x10,0x62,0x00,0xa9,0x01,0x40,0x14,
+0x20,0x00,0xa2,0x34,0xb0,0xfe,0x62,0x14,0x00,0xf0,0x02,0x3c,0xff,0x00,0x03,0x3c,
+0x00,0xff,0x63,0x34,0x24,0x10,0x03,0x02,0x02,0x3a,0x02,0x00,0x80,0x04,0xe0,0x10,
+0x02,0x80,0x04,0x3c,0x05,0x00,0x02,0x24,0xc2,0xfe,0xe2,0x14,0xc0,0x02,0x82,0x36,
+0x02,0x80,0x06,0x3c,0x8f,0x7d,0xc2,0x90,0x00,0x00,0x00,0x00,0x00,0x00,0xc2,0xaf,
+0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,
+0x2e,0x02,0x62,0x10,0x2b,0x10,0x43,0x00,0x98,0x00,0x40,0x14,0x0e,0x00,0xc2,0x34,
+0x01,0x00,0xc2,0x34,0xab,0x03,0x62,0x10,0x2b,0x10,0x43,0x00,0x48,0x01,0x40,0x14,
+0x00,0xff,0x02,0x3c,0x94,0xfe,0x66,0x14,0x00,0xf0,0x02,0x3c,0x5b,0x4e,0x00,0x0c,
+0x21,0x20,0x00,0x00,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,
+0x00,0x00,0x00,0x00,0x4c,0x02,0x62,0x10,0x2b,0x10,0x43,0x00,0xa6,0x00,0x40,0x14,
+0xa1,0x00,0xe2,0x34,0x22,0x00,0xe2,0x34,0xbd,0x02,0x62,0x10,0x2b,0x10,0x62,0x00,
+0x88,0x01,0x40,0x14,0x00,0x20,0x02,0x3c,0x28,0x00,0xe2,0x34,0x82,0xfe,0x62,0x14,
+0x00,0xf0,0x02,0x3c,0x0f,0x00,0x04,0x3c,0xff,0xff,0x85,0x34,0x60,0x00,0x06,0x24,
+0xba,0x44,0x00,0x0c,0x24,0x00,0x04,0x24,0x84,0x0a,0x00,0x0c,0xe8,0x03,0x04,0x24,
+0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,
+0x0f,0x00,0x06,0x3c,0x24,0x00,0x04,0x24,0xdd,0x44,0x00,0x0c,0xff,0xff,0xc5,0x34,
+0x1f,0x00,0x51,0x30,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,
+0xb3,0x0a,0x00,0x0c,0x64,0x00,0x04,0x24,0xc0,0x02,0x82,0x36,0x00,0x00,0xd1,0xa3,
+0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0x18,0x02,0xc2,0x10,
+0x2b,0x10,0x46,0x00,0x01,0x01,0x40,0x14,0x00,0xa0,0x02,0x3c,0x00,0x60,0x02,0x3c,
+0x04,0x00,0xc2,0x10,0x80,0x10,0x08,0x00,0x7a,0xfe,0xc5,0x14,0xc0,0x02,0x82,0x36,
+0x80,0x10,0x08,0x00,0x21,0x10,0x48,0x00,0x21,0x10,0x53,0x00,0x21,0x10,0x49,0x00,
+0xc1,0x43,0x44,0xa0,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,
+0x00,0x00,0x00,0x00,0x3f,0x03,0x62,0x10,0x2b,0x10,0x62,0x00,0xb6,0x02,0x40,0x14,
+0xad,0x00,0xe2,0x34,0xc7,0x03,0x62,0x10,0xae,0x00,0xe2,0x34,0x4e,0xfe,0x62,0x14,
+0x00,0xf0,0x02,0x3c,0xff,0x00,0x02,0x3c,0x24,0x20,0x02,0x02,0x00,0xff,0x05,0x32,
+0x02,0x24,0x04,0x00,0x69,0x4f,0x00,0x0c,0x02,0x2a,0x05,0x00,0x00,0x00,0xc2,0xa3,
+0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,
+0x4b,0x02,0x62,0x10,0x2b,0x10,0x62,0x00,0x17,0x01,0x40,0x14,0x03,0x00,0xa2,0x34,
+0x82,0x03,0x62,0x10,0x08,0x00,0xa2,0x34,0x3b,0xfe,0x62,0x14,0x00,0xf0,0x02,0x3c,
+0x00,0xff,0x02,0x32,0x02,0x82,0x02,0x00,0xcc,0x02,0x83,0x36,0x00,0x00,0x70,0xac,
+0x12,0x04,0x00,0x12,0x01,0x00,0x02,0x24,0x9c,0x04,0x02,0x12,0x00,0x00,0x00,0x00,
+0x7a,0x42,0x00,0x0c,0x21,0x20,0x00,0x00,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,
+0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0x4e,0x02,0x62,0x10,0x2b,0x10,0x62,0x00,
+0xe4,0x00,0x40,0x14,0x00,0xff,0x02,0x32,0x13,0x00,0x82,0x34,0x4c,0x03,0x62,0x10,
+0x14,0x00,0x82,0x34,0x24,0xfe,0x62,0x14,0x00,0xf0,0x02,0x3c,0xd3,0x0a,0x00,0x0c,
+0xfd,0x00,0x04,0x24,0x10,0x10,0x03,0x3c,0xa0,0x00,0x82,0x36,0x10,0x10,0x63,0x34,
+0x00,0xc0,0x07,0x3c,0x25,0xb0,0x06,0x3c,0x00,0x00,0x43,0xac,0xa4,0x00,0x84,0x36,
+0x00,0xa1,0xe7,0x34,0xa8,0x00,0xc6,0x34,0xc0,0x02,0x82,0x36,0x00,0x00,0x80,0xac,
+0x00,0x00,0xc7,0xac,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,
+0x60,0x02,0x62,0x10,0x2b,0x10,0x62,0x00,0xf6,0x00,0x40,0x14,0x03,0x00,0xa2,0x34,
+0x4b,0x03,0x62,0x10,0x04,0x00,0xa2,0x34,0x0b,0xfe,0x62,0x14,0x00,0xf0,0x02,0x3c,
+0xf4,0x63,0x62,0x92,0x00,0x00,0x00,0x00,0x00,0x00,0xc2,0xaf,0xc0,0x02,0x82,0x36,
+0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0x61,0x02,0x62,0x10,
+0x2b,0x10,0x62,0x00,0xfe,0x00,0x40,0x14,0x01,0x00,0x02,0x24,0x0f,0x00,0xc2,0x34,
+0x63,0x03,0x62,0x10,0x10,0x00,0xc2,0x34,0xfb,0xfd,0x62,0x14,0x00,0xf0,0x02,0x3c,
+0x00,0xff,0x03,0x32,0x00,0xff,0x02,0x34,0x9d,0x03,0x62,0x10,0xc0,0x02,0x82,0x36,
+0x8c,0x65,0x60,0xae,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,
+0x47,0x02,0x62,0x10,0x2b,0x10,0x62,0x00,0x02,0x01,0x40,0x14,0x03,0x00,0xe2,0x34,
+0x8d,0x03,0x62,0x10,0x04,0x00,0xe2,0x34,0xeb,0xfd,0x62,0x14,0x00,0xf0,0x02,0x3c,
+0x1e,0x57,0x00,0x0c,0x00,0x00,0x00,0x00,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,
+0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0x9b,0x01,0x62,0x10,0x2b,0x10,0x43,0x00,
+0xcf,0x00,0x40,0x14,0xa2,0x00,0xe2,0x34,0xa0,0x00,0xe2,0x34,0xde,0xfd,0x62,0x14,
+0x00,0xf0,0x02,0x3c,0x00,0x0f,0x02,0x32,0x02,0x22,0x02,0x00,0x01,0x00,0x03,0x24,
+0x3c,0x04,0x83,0x10,0x02,0x00,0x02,0x24,0x34,0x04,0x82,0x10,0x03,0x00,0x02,0x24,
+0x46,0x03,0x82,0x10,0x00,0x00,0x00,0x00,0xde,0x4f,0x00,0x0c,0x21,0x20,0x00,0x00,
+0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,
+0x46,0x02,0x62,0x10,0x2b,0x10,0x62,0x00,0xe6,0xfd,0x40,0x14,0xc0,0x02,0x82,0x36,
+0x18,0x00,0xe2,0x34,0x45,0x03,0x62,0x10,0x19,0x00,0xe2,0x34,0xc6,0xfd,0x62,0x14,
+0x00,0xf0,0x02,0x3c,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x94,0x0e,0x83,0x36,
+0x9c,0x0e,0x82,0x36,0xa4,0x0e,0x84,0x36,0xac,0x0e,0x87,0x36,0x00,0x00,0x65,0x8c,
+0x00,0x00,0x48,0x8c,0x00,0x00,0x8a,0x8c,0x00,0x00,0xe6,0x8c,0x02,0x80,0x07,0x3c,
+0x68,0x15,0xed,0x24,0xb4,0x0e,0x82,0x36,0x00,0x00,0x47,0x8c,0x0c,0x40,0xa3,0x8d,
+0xff,0x03,0x02,0x3c,0x10,0x40,0xa4,0x8d,0x24,0x28,0xa2,0x00,0x24,0x30,0xc2,0x00,
+0xbc,0x0e,0x82,0x36,0x00,0x00,0x4b,0x8c,0x00,0xfc,0x02,0x24,0x02,0x2c,0x05,0x00,
+0x24,0x18,0x62,0x00,0x02,0x34,0x06,0x00,0x24,0x20,0x82,0x00,0xc4,0x0e,0x82,0x36,
+0x25,0x18,0x65,0x00,0x25,0x20,0x86,0x00,0x00,0x00,0x45,0x8c,0xff,0x03,0x06,0x3c,
+0xf0,0xff,0x02,0x3c,0xff,0x03,0x42,0x34,0x24,0x38,0xe6,0x00,0x82,0x39,0x07,0x00,
+0x24,0x20,0x82,0x00,0x24,0x40,0x06,0x01,0x08,0x40,0xa9,0x8d,0x25,0x20,0x87,0x00,
+0xcc,0x0e,0x8c,0x36,0xff,0x03,0x07,0x3c,0x00,0x00,0x86,0x8d,0x24,0x18,0x62,0x00,
+0x24,0x50,0x47,0x01,0x24,0x58,0x67,0x01,0x82,0x41,0x08,0x00,0xff,0x9f,0x02,0x3c,
+0x0f,0xc0,0x07,0x3c,0xff,0xff,0xe7,0x34,0xff,0xff,0x42,0x34,0x25,0x18,0x68,0x00,
+0x24,0x48,0x22,0x01,0x24,0x18,0x67,0x00,0xff,0x03,0x02,0x3c,0x24,0x20,0x87,0x00,
+0xff,0x00,0x07,0x3c,0x24,0x28,0xa2,0x00,0x24,0x30,0xc2,0x00,0x00,0x51,0x0a,0x00,
+0x00,0x20,0x02,0x3c,0x00,0x59,0x0b,0x00,0x00,0xff,0xe7,0x34,0x25,0x48,0x22,0x01,
+0x25,0x18,0x6a,0x00,0x25,0x20,0x8b,0x00,0x02,0x2c,0x05,0x00,0x02,0x34,0x06,0x00,
+0x24,0x10,0x07,0x02,0x08,0x40,0xa9,0xad,0x0c,0x40,0xa3,0xad,0x10,0x40,0xa4,0xad,
+0x14,0x40,0xa5,0xa5,0x4e,0x03,0x40,0x10,0x16,0x40,0xa6,0xa5,0xff,0x00,0x02,0x3c,
+0x24,0x10,0x02,0x02,0x02,0x14,0x02,0x00,0x02,0x1a,0x10,0x00,0xc7,0x42,0xa2,0xa1,
+0xc3,0x42,0xa3,0xa1,0xc3,0x42,0x62,0x92,0x25,0xb0,0x03,0x3c,0x61,0x0c,0x63,0x34,
+0x10,0x00,0xa4,0x27,0x00,0x00,0x62,0xa0,0x7a,0x54,0x00,0x0c,0x00,0x00,0x00,0x00,
+0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,
+0x95,0x00,0xc2,0x10,0x00,0x40,0x02,0x3c,0x09,0xff,0xc2,0x10,0xc0,0x02,0x82,0x36,
+0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0x7b,0x02,0xc2,0x10,
+0x2b,0x10,0x46,0x00,0x83,0x00,0x40,0x14,0x00,0xb0,0x02,0x3c,0x00,0x90,0x02,0x3c,
+0x78,0xfd,0xc2,0x14,0xc0,0x02,0x82,0x36,0x21,0x10,0x13,0x01,0x73,0x44,0x44,0xa0,
+0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,
+0x55,0xfd,0x62,0x14,0x00,0xf0,0x02,0x3c,0x6a,0x56,0x00,0x0c,0x21,0x20,0x00,0x02,
+0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,
+0x07,0x00,0x42,0x34,0x4c,0xfd,0x62,0x14,0x00,0xf0,0x02,0x3c,0x5b,0x4e,0x00,0x0c,
+0x07,0x00,0x04,0x24,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,
+0x00,0x00,0x00,0x00,0x02,0x1a,0x02,0x00,0x21,0x88,0x00,0x00,0xaf,0x4a,0x00,0x08,
+0x27,0xb0,0x06,0x3c,0x01,0x00,0x31,0x26,0x00,0x01,0x22,0x2e,0x08,0x00,0x40,0x10,
+0xff,0x00,0x22,0x2e,0x00,0x00,0xc2,0x94,0x00,0x00,0x00,0x00,0xff,0x00,0x42,0x30,
+0xf8,0xff,0x43,0x14,0x08,0x00,0xc6,0x24,0x00,0x00,0xd1,0xa7,0xff,0x00,0x22,0x2e,
+0x50,0xfd,0x40,0x14,0xc0,0x02,0x82,0x36,0x12,0x87,0x02,0x3c,0x00,0x00,0xc2,0xaf,
+0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,
+0x2d,0xfd,0x62,0x14,0x00,0xf0,0x02,0x3c,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,
+0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0xff,0x00,0x03,0x3c,0x00,0xff,0x63,0x34,
+0x24,0x10,0x03,0x02,0x02,0x82,0x02,0x00,0xcc,0x02,0x83,0x36,0x00,0x00,0x70,0xac,
+0x00,0x00,0xd1,0x8f,0x21,0x10,0x14,0x02,0x00,0x00,0x51,0xac,0x00,0x00,0x51,0x8c,
+0xc0,0x02,0x82,0x36,0x00,0x00,0xd1,0xaf,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,
+0x00,0x00,0x00,0x00,0x00,0x64,0x62,0x92,0x00,0x00,0x00,0x00,0x00,0x00,0xc2,0xaf,
+0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,
+0xf4,0x02,0x62,0x10,0xa3,0x00,0xe2,0x34,0x0f,0xfd,0x62,0x14,0x00,0xf0,0x02,0x3c,
+0xc0,0x02,0x82,0x36,0x8c,0x65,0x60,0xae,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,
+0x00,0x00,0x00,0x00,0xec,0x63,0x62,0x92,0x00,0x00,0x00,0x00,0x00,0x00,0xc2,0xaf,
+0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,
+0xe6,0x63,0x62,0xa6,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,
+0x00,0x00,0x00,0x00,0x08,0x40,0x63,0x8e,0xff,0x9f,0x07,0x3c,0xff,0xff,0xe7,0x34,
+0x02,0x2c,0x10,0x00,0x00,0x1f,0x04,0x32,0x24,0x18,0x67,0x00,0x25,0x18,0x62,0x00,
+0x02,0x8a,0x04,0x00,0x3f,0x00,0xa5,0x30,0xc0,0x02,0x82,0x36,0x08,0x40,0x63,0xae,
+0xbc,0x42,0x71,0xa2,0xc1,0x42,0x65,0xa2,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,
+0x00,0x00,0x00,0x00,0x00,0x00,0xe2,0x92,0x00,0x00,0x00,0x00,0xfa,0x00,0x42,0x30,
+0x00,0x00,0xe2,0xa2,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,
+0x00,0x00,0x00,0x00,0x00,0x00,0xe2,0x92,0x00,0x00,0x00,0x00,0xfd,0x00,0x42,0x30,
+0x00,0x00,0xe2,0xa2,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,
+0x00,0x00,0x00,0x00,0xf7,0xfc,0xc2,0x14,0xc0,0x02,0x82,0x36,0x80,0x10,0x08,0x00,
+0x21,0x10,0x53,0x00,0x60,0x45,0x43,0xac,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,
+0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0x80,0x10,0x08,0x00,0x21,0x10,0x48,0x00,
+0x21,0x10,0x53,0x00,0x21,0x10,0x49,0x00,0x34,0x43,0x44,0xa0,0xc0,0x02,0x82,0x36,
+0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0x77,0x56,0x00,0x0c,
+0x21,0x20,0x00,0x02,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,
+0x00,0x00,0x00,0x00,0xff,0xff,0x02,0x34,0x8c,0x65,0x62,0xae,0xc0,0x02,0x82,0x36,
+0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0x07,0x0b,0x00,0x0c,
+0x00,0x00,0x00,0x00,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,
+0x00,0x00,0x00,0x00,0xf0,0x63,0x62,0x92,0x00,0x00,0x00,0x00,0x00,0x00,0xc2,0xaf,
+0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,
+0x08,0x40,0x62,0x8e,0xff,0x9f,0x03,0x3c,0xff,0xff,0x63,0x34,0x24,0x10,0x43,0x00,
+0x08,0x40,0x62,0xae,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,
+0x00,0x00,0x00,0x00,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x01,0x00,0x21,0x38,
+0x00,0x60,0x81,0x40,0x22,0x51,0x00,0x0c,0x00,0x00,0x00,0x00,0x00,0x60,0x01,0x40,
+0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,
+0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0xff,0x00,0x07,0x3c,0x00,0xff,0xe7,0x34,
+0x24,0x10,0x07,0x02,0x02,0x82,0x02,0x00,0xcc,0x02,0x43,0x36,0x00,0x00,0x70,0xac,
+0x21,0x10,0x12,0x02,0x00,0x00,0x51,0x8c,0x00,0x00,0x00,0x00,0x00,0x00,0xd1,0xaf,
+0x00,0x00,0x51,0x8c,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,
+0x00,0x00,0x00,0x00,0xb7,0x4f,0x00,0x0c,0x00,0x00,0x00,0x00,0xc0,0x02,0x82,0x36,
+0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0x21,0x88,0x00,0x00,
+0x6c,0x4b,0x00,0x08,0x27,0xb0,0x04,0x3c,0x01,0x00,0x31,0x26,0x00,0x01,0x22,0x2e,
+0x0a,0x00,0x40,0x10,0xff,0x00,0x22,0x2e,0x00,0x00,0x83,0x94,0x00,0x00,0x00,0x00,
+0xff,0xff,0x67,0x30,0xff,0x00,0xe2,0x30,0xf0,0x00,0x42,0x28,0xf6,0xff,0x40,0x14,
+0x08,0x00,0x84,0x24,0x00,0x00,0xc7,0xa7,0xff,0x00,0x22,0x2e,0x91,0xfc,0x40,0x14,
+0xc0,0x02,0x82,0x36,0x12,0x87,0x02,0x3c,0x00,0x00,0xc2,0xaf,0xc0,0x02,0x82,0x36,
+0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0xe4,0x63,0x62,0x96,
+0x00,0x00,0x00,0x00,0x00,0x00,0xc2,0xa7,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,
+0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0x04,0x64,0x62,0x92,0x00,0x00,0x00,0x00,
+0x00,0x00,0xc2,0xaf,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,
+0x00,0x00,0x00,0x00,0x00,0xff,0x02,0x32,0x02,0x12,0x02,0x00,0x03,0x00,0x43,0x2c,
+0x02,0x00,0x60,0x10,0x00,0x00,0x00,0x00,0x02,0x40,0x62,0xa2,0x02,0x40,0x63,0x92,
+0x90,0x0c,0x42,0x36,0x00,0x00,0x43,0xa0,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,
+0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0xd7,0x56,0x00,0x0c,0x00,0x00,0x00,0x00,
+0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,
+0x21,0x10,0x13,0x01,0x56,0x44,0x44,0xa0,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,
+0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0xff,0x00,0x03,0x3c,0x24,0x20,0x03,0x02,
+0x73,0x0e,0x00,0x0c,0x02,0x24,0x04,0x00,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,
+0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0x02,0x1c,0x10,0x00,0x00,0x1f,0x02,0x32,
+0x02,0x8a,0x02,0x00,0x3f,0x00,0x65,0x30,0xc1,0x42,0x65,0xa2,0xbc,0x42,0x71,0xa2,
+0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,
+0x1f,0x12,0x00,0x0c,0x00,0x00,0x00,0x00,0x00,0x00,0xc2,0xaf,0x00,0x60,0x01,0x40,
+0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,0x03,0x40,0x62,0x92,0x0e,0x0c,0x44,0x36,
+0x01,0x00,0x42,0x24,0xff,0x00,0x43,0x30,0x00,0x00,0x83,0xa0,0x03,0x40,0x62,0xa2,
+0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,
+0x00,0xff,0x02,0x32,0x02,0x3a,0x02,0x00,0x1a,0x01,0xe0,0x10,0x4f,0x00,0x82,0x36,
+0x94,0x00,0x42,0x36,0x00,0x00,0x43,0x94,0xff,0xff,0xe2,0x24,0xb0,0x03,0x45,0x36,
+0xff,0xff,0x71,0x30,0x1b,0x00,0x27,0x02,0x02,0x00,0xe0,0x14,0x00,0x00,0x00,0x00,
+0x0d,0x00,0x07,0x00,0xff,0xff,0x47,0x30,0x00,0x00,0xb1,0xac,0x80,0xff,0x02,0x24,
+0x00,0x19,0x07,0x00,0x25,0x18,0x62,0x00,0x4f,0x00,0x44,0x36,0x9e,0x00,0x46,0x36,
+0x00,0x00,0xa7,0xac,0x00,0x00,0x83,0xa0,0x25,0xb0,0x04,0x3c,0x44,0x00,0x84,0x34,
+0x12,0x88,0x00,0x00,0x80,0x12,0x11,0x00,0x00,0xfc,0x42,0x24,0x00,0x00,0xb1,0xac,
+0x00,0x00,0xd1,0xa4,0x42,0x89,0x02,0x00,0x26,0xb0,0x02,0x3c,0x7c,0x00,0x42,0x34,
+0x00,0x00,0xb1,0xac,0x00,0x00,0x51,0xa4,0x25,0xb0,0x02,0x3c,0x44,0x00,0x42,0x34,
+0x00,0x00,0x43,0x94,0xff,0xfd,0x02,0x24,0x24,0x18,0x62,0x00,0x00,0x00,0x83,0xa4,
+0x00,0x00,0x82,0x94,0x00,0x00,0x00,0x00,0x00,0x02,0x42,0x34,0x00,0x00,0x82,0xa4,
+0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,
+0x24,0x10,0x08,0x02,0xcc,0x02,0x43,0x36,0x00,0xff,0x04,0x32,0x02,0x3c,0x02,0x00,
+0x00,0x00,0x70,0xac,0x04,0x00,0xe0,0x10,0x02,0x82,0x04,0x00,0x01,0x00,0x02,0x24,
+0x02,0x00,0xe2,0x10,0x01,0x00,0x04,0x24,0x21,0x20,0x00,0x00,0x7a,0x42,0x00,0x0c,
+0x00,0x00,0x00,0x00,0x0f,0x00,0x06,0x3c,0x21,0x20,0x00,0x02,0xdd,0x44,0x00,0x0c,
+0xff,0xff,0xc5,0x34,0x0f,0x00,0x07,0x3c,0xff,0xff,0xe7,0x34,0x24,0x88,0x47,0x00,
+0xc0,0x02,0x82,0x36,0x00,0x00,0xd1,0xaf,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,
+0x00,0x00,0x00,0x00,0x28,0xb0,0x02,0x3c,0x00,0x00,0x43,0x90,0xff,0x00,0x02,0x24,
+0xff,0x00,0x70,0x30,0xf3,0xfb,0x02,0x12,0xc0,0x02,0x82,0x36,0x28,0xb0,0x05,0x3c,
+0xff,0x00,0x04,0x24,0xc0,0x10,0x10,0x00,0x21,0x10,0x45,0x00,0x00,0x00,0x43,0x90,
+0x00,0x00,0x00,0x00,0xff,0x00,0x70,0x30,0xfb,0xff,0x04,0x16,0xc0,0x10,0x10,0x00,
+0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,
+0x00,0x1f,0x02,0x32,0x02,0x1c,0x10,0x00,0x02,0x8a,0x02,0x00,0x3f,0x00,0x65,0x30,
+0xc0,0x02,0x82,0x36,0xbc,0x42,0x71,0xa2,0xc1,0x42,0x65,0xa2,0x00,0x00,0x40,0xac,
+0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0xff,0x00,0x07,0x3c,0x24,0x20,0x07,0x02,
+0x15,0x51,0x00,0x0c,0x02,0x24,0x04,0x00,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,
+0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0xe8,0x63,0x62,0x92,0x00,0x00,0x00,0x00,
+0x00,0x00,0xc2,0xaf,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,
+0x00,0x00,0x00,0x00,0xfc,0x63,0x62,0x92,0x00,0x00,0x00,0x00,0x00,0x00,0xc2,0xaf,
+0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,
+0x00,0x00,0xe2,0x92,0x00,0x00,0x00,0x00,0xff,0x00,0x51,0x30,0x05,0x00,0x23,0x36,
+0xc0,0x02,0x82,0x36,0x00,0x00,0xe3,0xa2,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,
+0x00,0x00,0x00,0x00,0xc0,0x02,0x82,0x36,0xe6,0x63,0x60,0xa6,0x00,0x00,0x40,0xac,
+0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0xbd,0x56,0x00,0x0c,0x21,0x20,0x00,0x02,
+0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,
+0x41,0x0b,0x00,0x0c,0x00,0x00,0x00,0x00,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,
+0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0xe2,0x92,0x00,0x00,0x00,0x00,
+0xff,0x00,0x51,0x30,0x02,0x00,0x23,0x36,0xc0,0x02,0x82,0x36,0x00,0x00,0xe3,0xa2,
+0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0x02,0x80,0x02,0x3c,
+0xec,0x91,0x42,0x24,0x00,0x00,0x47,0x8c,0xc0,0x02,0x43,0x36,0x25,0xb0,0x0c,0x3c,
+0x08,0x40,0xe4,0x8c,0x00,0x00,0x60,0xac,0x42,0x17,0x04,0x00,0x03,0x00,0x42,0x30,
+0x60,0x00,0x40,0x14,0x03,0x0d,0x42,0x36,0x00,0x00,0x45,0x90,0x10,0x40,0xe6,0x8c,
+0xff,0x9f,0x03,0x3c,0xff,0xff,0x63,0x34,0xff,0x3f,0x02,0x3c,0x24,0x20,0x83,0x00,
+0xff,0xff,0x42,0x34,0x00,0x20,0x03,0x3c,0x24,0x58,0xc2,0x00,0x25,0x20,0x83,0x00,
+0x00,0x40,0x02,0x3c,0x70,0x00,0xa5,0x30,0x25,0x58,0x62,0x01,0x08,0x01,0xa0,0x10,
+0x08,0x40,0xe4,0xac,0x94,0x0e,0x82,0x35,0x9c,0x0e,0x83,0x35,0xa4,0x0e,0x86,0x35,
+0x00,0x00,0x45,0x8c,0xac,0x0e,0x87,0x35,0x00,0x00,0x68,0x8c,0x00,0x00,0xca,0x8c,
+0x02,0x80,0x06,0x3c,0x00,0x00,0xe4,0x8c,0x68,0x15,0xc6,0x24,0x0c,0x40,0xc3,0x8c,
+0xb4,0x0e,0x82,0x35,0x00,0x00,0x47,0x8c,0xff,0x03,0x02,0x3c,0x00,0xfc,0x06,0x24,
+0x24,0x28,0xa2,0x00,0x24,0x20,0x82,0x00,0xbc,0x0e,0x82,0x35,0x00,0x00,0x49,0x8c,
+0x02,0x2c,0x05,0x00,0x24,0x10,0x66,0x01,0x24,0x18,0x66,0x00,0x02,0x24,0x04,0x00,
+0xc4,0x0e,0x86,0x35,0x25,0x18,0x65,0x00,0x25,0x10,0x44,0x00,0x00,0x00,0xc5,0x8c,
+0xff,0x03,0x04,0x3c,0xf0,0xff,0x06,0x3c,0xff,0x03,0xc6,0x34,0x24,0x38,0xe4,0x00,
+0xcc,0x0e,0x8b,0x35,0x24,0x40,0x04,0x01,0x82,0x39,0x07,0x00,0x00,0x00,0x64,0x8d,
+0x24,0x10,0x46,0x00,0x24,0x18,0x66,0x00,0x25,0x10,0x47,0x00,0x82,0x41,0x08,0x00,
+0xff,0x03,0x07,0x3c,0x0f,0xc0,0x06,0x3c,0x24,0x50,0x47,0x01,0x24,0x48,0x27,0x01,
+0xff,0xff,0xc6,0x34,0x25,0x18,0x68,0x00,0x24,0x28,0xa7,0x00,0x24,0x20,0x87,0x00,
+0x00,0x51,0x0a,0x00,0x24,0x18,0x66,0x00,0x00,0x49,0x09,0x00,0x24,0x10,0x46,0x00,
+0x02,0x80,0x07,0x3c,0x68,0x15,0xe7,0x24,0x25,0x18,0x6a,0x00,0x25,0x10,0x49,0x00,
+0x02,0x2c,0x05,0x00,0x02,0x24,0x04,0x00,0x0c,0x40,0xe3,0xac,0x10,0x40,0xe2,0xac,
+0x14,0x40,0xe5,0xa4,0x16,0x40,0xe4,0xa4,0x02,0x80,0x02,0x3c,0x68,0x15,0x43,0x24,
+0x0c,0x40,0x62,0x8c,0x00,0x00,0x00,0x00,0xbd,0x00,0x40,0x04,0x00,0x00,0x00,0x00,
+0x00,0xff,0x02,0x32,0xc6,0x00,0x40,0x10,0x00,0x00,0x00,0x00,0x02,0x12,0x02,0x00,
+0xc3,0x42,0x62,0xa0,0x7a,0x54,0x00,0x0c,0x10,0x00,0xa4,0x27,0xc2,0x53,0x00,0x0c,
+0x00,0x00,0x00,0x00,0x0c,0x40,0x62,0x8e,0x00,0x80,0x03,0x3c,0x25,0x10,0x43,0x00,
+0x0c,0x40,0x62,0xae,0xc3,0x42,0x62,0x92,0x25,0xb0,0x03,0x3c,0x61,0x0c,0x63,0x34,
+0x00,0x00,0x62,0xa0,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,
+0x00,0x00,0x00,0x00,0xcf,0x4e,0x00,0x0c,0x21,0x20,0x00,0x02,0xc0,0x02,0x82,0x36,
+0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0x17,0x51,0x00,0x0c,
+0x00,0x00,0x00,0x00,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,
+0x00,0x00,0x00,0x00,0x9e,0x00,0x83,0x36,0x00,0x00,0x40,0xa0,0x00,0x00,0x60,0xa4,
+0x94,0x00,0x82,0x36,0x00,0x00,0x43,0x94,0x25,0xb0,0x06,0x3c,0x44,0x00,0xc6,0x34,
+0xff,0xff,0x71,0x30,0x80,0x12,0x11,0x00,0x00,0xf8,0x42,0x24,0x42,0x89,0x02,0x00,
+0x26,0xb0,0x02,0x3c,0xb0,0x03,0x83,0x36,0x7c,0x00,0x42,0x34,0x00,0x00,0x71,0xac,
+0x00,0x00,0x51,0xa4,0x00,0x00,0xc3,0x94,0xff,0xfd,0x02,0x24,0x24,0x18,0x62,0x00,
+0x00,0x00,0xc3,0xa4,0x00,0x00,0xc2,0x94,0x00,0x00,0x00,0x00,0x00,0x02,0x42,0x34,
+0x00,0x00,0xc2,0xa4,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,
+0x00,0x00,0x00,0x00,0x5b,0x4e,0x00,0x0c,0x01,0x00,0x04,0x24,0xc0,0x02,0x82,0x36,
+0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0x80,0x10,0x08,0x00,
+0x21,0x10,0x53,0x00,0xec,0x44,0x43,0xac,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,
+0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0xa7,0x0b,0x00,0x0c,0x00,0x00,0x00,0x00,
+0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,
+0x28,0xb0,0x11,0x3c,0x00,0x00,0x22,0x96,0xff,0x00,0x04,0x3c,0x24,0x18,0x04,0x02,
+0x02,0x24,0x03,0x00,0xff,0x00,0x42,0x30,0x0a,0x00,0x82,0x10,0xff,0x7f,0x02,0x3c,
+0x08,0x00,0x31,0x26,0x00,0x00,0x22,0x96,0xff,0xff,0x23,0x32,0xff,0x00,0x42,0x30,
+0x03,0x00,0x82,0x10,0x00,0x08,0x63,0x2c,0xf9,0xff,0x60,0x14,0x00,0x00,0x00,0x00,
+0xff,0x7f,0x02,0x3c,0xff,0xff,0x42,0x34,0x24,0x10,0x22,0x02,0x00,0x00,0xc2,0xaf,
+0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,
+0xf8,0x63,0x62,0x92,0x00,0x00,0x00,0x00,0x00,0x00,0xc2,0xaf,0xc0,0x02,0x82,0x36,
+0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0xff,0x00,0x03,0x3c,
+0x24,0x10,0x03,0x02,0x00,0xff,0x04,0x32,0xcc,0x02,0x83,0x36,0x02,0x3c,0x02,0x00,
+0x00,0x00,0x70,0xac,0x04,0x00,0xe0,0x10,0x02,0x82,0x04,0x00,0x01,0x00,0x02,0x24,
+0x02,0x00,0xe2,0x10,0x01,0x00,0x04,0x24,0x21,0x20,0x00,0x00,0x7a,0x42,0x00,0x0c,
+0x00,0x00,0x00,0x00,0x00,0x00,0xd1,0x8f,0x0f,0x00,0x06,0x3c,0xff,0xff,0xc5,0x34,
+0x21,0x20,0x00,0x02,0xba,0x44,0x00,0x0c,0x21,0x30,0x20,0x02,0x0f,0x00,0x07,0x3c,
+0x21,0x20,0x00,0x02,0xdd,0x44,0x00,0x0c,0xff,0xff,0xe5,0x34,0x00,0x00,0xc2,0xaf,
+0x21,0x88,0x40,0x00,0x25,0xb0,0x02,0x3c,0xc8,0x02,0x42,0x34,0x00,0x00,0x51,0xac,
+0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,
+0x25,0xb0,0x06,0x3c,0xff,0x00,0x02,0x24,0x56,0x01,0xc6,0x34,0x00,0x00,0xc2,0xa4,
+0x01,0x00,0x03,0x24,0x02,0x80,0x07,0x3c,0xc0,0x02,0x82,0x36,0xb8,0x7d,0xe3,0xa0,
+0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0xde,0x4f,0x00,0x0c,
+0x03,0x00,0x04,0x24,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,
+0x00,0x00,0x00,0x00,0xde,0x4e,0x00,0x0c,0x21,0x20,0x00,0x02,0xc0,0x02,0x82,0x36,
+0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0x08,0x40,0x62,0x8e,
+0xff,0x9f,0x04,0x3c,0xff,0xff,0x84,0x34,0x24,0x10,0x44,0x00,0x08,0x40,0x62,0xae,
+0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,
+0xc0,0x10,0x03,0x00,0x21,0x10,0x43,0x00,0x80,0x10,0x02,0x00,0x21,0x10,0x43,0x00,
+0x80,0x10,0x02,0x00,0x21,0x10,0x53,0x00,0x70,0x51,0x43,0x8c,0xc0,0x02,0x82,0x36,
+0x00,0x00,0xc3,0xaf,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,
+0x7a,0x54,0x00,0x0c,0x10,0x00,0xa4,0x27,0xc3,0x42,0x62,0x92,0x25,0xb0,0x03,0x3c,
+0x61,0x0c,0x63,0x34,0x00,0x00,0x62,0xa0,0xd4,0x4c,0x00,0x08,0xc0,0x02,0x82,0x36,
+0x22,0x51,0x00,0x0c,0x10,0x40,0xeb,0xac,0xbd,0x4c,0x00,0x08,0x02,0x80,0x02,0x3c,
+0xc6,0x4c,0x00,0x08,0x12,0x00,0x02,0x24,0x1a,0x57,0x00,0x0c,0x00,0x00,0x00,0x00,
+0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,
+0xff,0xff,0x02,0x34,0x8c,0x65,0x62,0xae,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,
+0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0xc0,0x10,0x03,0x00,0x21,0x10,0x43,0x00,
+0x80,0x10,0x02,0x00,0x21,0x10,0x43,0x00,0x80,0x10,0x02,0x00,0x21,0x10,0x53,0x00,
+0x74,0x51,0x43,0x8c,0xc0,0x02,0x82,0x36,0x00,0x00,0xc3,0xaf,0x00,0x00,0x40,0xac,
+0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0xc0,0x10,0x03,0x00,0x21,0x10,0x43,0x00,
+0x80,0x10,0x02,0x00,0x21,0x10,0x43,0x00,0x80,0x10,0x02,0x00,0x21,0x10,0x53,0x00,
+0xd4,0x51,0x43,0x8c,0xc0,0x02,0x82,0x36,0x00,0x00,0xc3,0xaf,0x00,0x00,0x40,0xac,
+0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0xc0,0x10,0x03,0x00,0x21,0x10,0x43,0x00,
+0x80,0x10,0x02,0x00,0x21,0x10,0x43,0x00,0x02,0x80,0x06,0x3c,0x80,0x10,0x02,0x00,
+0xe0,0x66,0xc3,0x24,0x21,0x10,0x43,0x00,0x00,0x00,0x44,0x8c,0xc0,0x02,0x82,0x36,
+0x00,0x00,0xc4,0xaf,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,
+0x12,0x00,0x02,0x24,0xc7,0x42,0xa2,0xa1,0x77,0x4a,0x00,0x08,0xc3,0x42,0xa2,0xa1,
+0x88,0x7d,0x82,0x94,0x00,0x00,0x00,0x00,0x00,0x00,0xc2,0xaf,0xc0,0x02,0x82,0x36,
+0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0x7a,0x42,0x00,0x0c,
+0x21,0x20,0x00,0x00,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,
+0x00,0x00,0x00,0x00,0xff,0x00,0x06,0x3c,0x00,0xff,0xc6,0x34,0x00,0x00,0xc5,0x8f,
+0x24,0x20,0x06,0x02,0xe1,0x50,0x00,0x0c,0x02,0x22,0x04,0x00,0xc0,0x02,0x82,0x36,
+0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0xc0,0x10,0x03,0x00,
+0x21,0x10,0x43,0x00,0x80,0x10,0x02,0x00,0x21,0x10,0x43,0x00,0x02,0x80,0x07,0x3c,
+0x80,0x10,0x02,0x00,0xf0,0x66,0xe3,0x24,0x21,0x10,0x43,0x00,0x00,0x00,0x44,0x8c,
+0xc0,0x02,0x82,0x36,0x00,0x00,0xc4,0xaf,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,
+0x00,0x00,0x00,0x00,0xc0,0x10,0x03,0x00,0x21,0x10,0x43,0x00,0x80,0x10,0x02,0x00,
+0x21,0x10,0x43,0x00,0x02,0x80,0x06,0x3c,0x80,0x10,0x02,0x00,0xec,0x66,0xc3,0x24,
+0x21,0x10,0x43,0x00,0x00,0x00,0x44,0x8c,0xc0,0x02,0x82,0x36,0x00,0x00,0xc4,0xaf,
+0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0xc0,0x10,0x03,0x00,
+0x21,0x10,0x43,0x00,0x80,0x10,0x02,0x00,0x21,0x10,0x43,0x00,0x02,0x80,0x04,0x3c,
+0xe8,0x66,0x83,0x24,0x80,0x10,0x02,0x00,0x21,0x10,0x43,0x00,0x00,0x00,0x44,0x8c,
+0xc0,0x02,0x82,0x36,0x00,0x00,0xc4,0xaf,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,
+0x00,0x00,0x00,0x00,0xc0,0x10,0x03,0x00,0x21,0x10,0x43,0x00,0x80,0x10,0x02,0x00,
+0x21,0x10,0x43,0x00,0x02,0x80,0x07,0x3c,0x80,0x10,0x02,0x00,0xe4,0x66,0xe3,0x24,
+0x21,0x10,0x43,0x00,0x00,0x00,0x44,0x8c,0xc0,0x02,0x82,0x36,0x00,0x00,0xc4,0xaf,
+0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0xc0,0x10,0x03,0x00,
+0x21,0x10,0x43,0x00,0x80,0x10,0x02,0x00,0x21,0x10,0x43,0x00,0x02,0x80,0x04,0x3c,
+0x00,0x67,0x83,0x24,0x80,0x10,0x02,0x00,0x21,0x10,0x43,0x00,0x00,0x00,0x44,0x8c,
+0xc0,0x02,0x82,0x36,0x00,0x00,0xc4,0xaf,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,
+0x00,0x00,0x00,0x00,0xc0,0x10,0x03,0x00,0x21,0x10,0x43,0x00,0x80,0x10,0x02,0x00,
+0x21,0x10,0x43,0x00,0x02,0x80,0x07,0x3c,0x80,0x10,0x02,0x00,0xfc,0x66,0xe3,0x24,
+0x21,0x10,0x43,0x00,0x00,0x00,0x44,0x8c,0xc0,0x02,0x82,0x36,0x00,0x00,0xc4,0xaf,
+0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0xc0,0x10,0x03,0x00,
+0x21,0x10,0x43,0x00,0x80,0x10,0x02,0x00,0x21,0x10,0x43,0x00,0x02,0x80,0x06,0x3c,
+0x80,0x10,0x02,0x00,0xf8,0x66,0xc3,0x24,0x21,0x10,0x43,0x00,0x00,0x00,0x44,0x8c,
+0xc0,0x02,0x82,0x36,0x00,0x00,0xc4,0xaf,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,
+0x00,0x00,0x00,0x00,0xc0,0x10,0x03,0x00,0x21,0x10,0x43,0x00,0x80,0x10,0x02,0x00,
+0x21,0x10,0x43,0x00,0x02,0x80,0x04,0x3c,0xf4,0x66,0x83,0x24,0x80,0x10,0x02,0x00,
+0x21,0x10,0x43,0x00,0x00,0x00,0x44,0x8c,0xc0,0x02,0x82,0x36,0x00,0x00,0xc4,0xaf,
+0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0xde,0x4f,0x00,0x0c,
+0x02,0x00,0x04,0x24,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,
+0x00,0x00,0x00,0x00,0xde,0x4f,0x00,0x0c,0x01,0x00,0x04,0x24,0xc0,0x02,0x82,0x36,
+0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,0x00,0x00,0x00,0x00,0x7a,0x42,0x00,0x0c,
+0x01,0x00,0x04,0x24,0xc0,0x02,0x82,0x36,0x00,0x00,0x40,0xac,0x08,0x48,0x00,0x08,
+0x00,0x00,0x00,0x00,0x25,0xb0,0x05,0x3c,0x01,0x00,0x06,0x24,0x01,0x80,0x02,0x3c,
+0x04,0x30,0x86,0x00,0xf1,0x02,0xa7,0x34,0xed,0x02,0xa4,0x34,0x6c,0x39,0x42,0x24,
+0x18,0x03,0xa5,0x34,0x08,0x00,0x03,0x24,0x00,0x00,0xa2,0xac,0x00,0x00,0xe3,0xa0,
+0x00,0x00,0x80,0xa0,0x00,0x00,0x86,0xa0,0x00,0x00,0x80,0xa0,0x00,0x00,0x86,0xa0,
+0x00,0x00,0x80,0xa0,0x00,0x00,0x86,0xa0,0x00,0x00,0x80,0xa0,0x00,0x00,0x86,0xa0,
+0x00,0x00,0x80,0xa0,0x00,0x00,0xe0,0xa0,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,
+0x01,0x80,0x02,0x3c,0x25,0xb0,0x03,0x3c,0xc8,0x39,0x42,0x24,0x18,0x03,0x63,0x34,
+0x00,0x00,0x62,0xac,0x00,0x00,0x83,0x90,0x30,0x00,0x02,0x24,0x05,0x00,0x62,0x10,
+0x21,0x20,0x00,0x00,0x31,0x00,0x02,0x24,0x02,0x00,0x62,0x10,0x01,0x00,0x04,0x24,
+0x07,0x00,0x04,0x24,0x5b,0x4e,0x00,0x08,0x00,0x00,0x00,0x00,0x01,0x80,0x02,0x3c,
+0x25,0xb0,0x03,0x3c,0x04,0x3a,0x42,0x24,0x18,0x03,0x63,0x34,0x02,0x80,0x04,0x3c,
+0x00,0x00,0x62,0xac,0x08,0x00,0xe0,0x03,0xc4,0x7d,0x80,0xac,0x02,0x80,0x02,0x3c,
+0x08,0x7b,0x42,0x24,0xc0,0x20,0x04,0x00,0x21,0x20,0x82,0x00,0x21,0x28,0x00,0x00,
+0x00,0x60,0x06,0x40,0x01,0x00,0xc1,0x34,0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,
+0x00,0x00,0x82,0x8c,0x00,0x00,0x00,0x00,0x09,0x00,0x44,0x10,0x00,0x00,0x00,0x00,
+0x04,0x00,0x43,0x8c,0x21,0x28,0x40,0x00,0x00,0x00,0x42,0x8c,0x00,0x00,0x00,0x00,
+0x00,0x00,0x62,0xac,0x04,0x00,0x43,0xac,0x00,0x00,0xa5,0xac,0x04,0x00,0xa5,0xac,
+0x00,0x60,0x86,0x40,0x08,0x00,0xe0,0x03,0x21,0x10,0xa0,0x00,0x21,0x18,0x80,0x00,
+0xe8,0xff,0xbd,0x27,0x01,0x01,0x62,0x2c,0x10,0x00,0xbf,0xaf,0x01,0x00,0x04,0x24,
+0x01,0x02,0x65,0x2c,0x0a,0x00,0x40,0x14,0x21,0x30,0x00,0x00,0x02,0x00,0x04,0x24,
+0x07,0x00,0xa0,0x14,0x01,0x08,0x62,0x2c,0x05,0x00,0x40,0x14,0x03,0x00,0x04,0x24,
+0x10,0x00,0xbf,0x8f,0x21,0x10,0xc0,0x00,0x08,0x00,0xe0,0x03,0x18,0x00,0xbd,0x27,
+0x89,0x4e,0x00,0x0c,0x00,0x00,0x00,0x00,0x10,0x00,0xbf,0x8f,0x21,0x30,0x40,0x00,
+0x21,0x10,0xc0,0x00,0x08,0x00,0xe0,0x03,0x18,0x00,0xbd,0x27,0x02,0x80,0x03,0x3c,
+0x20,0x7b,0x62,0x8c,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x00,0x60,0x06,0x40,
+0x01,0x00,0xc1,0x34,0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,0x10,0x00,0x83,0x8c,
+0x02,0x80,0x02,0x3c,0x08,0x7b,0x42,0x24,0xc0,0x18,0x03,0x00,0x21,0x18,0x62,0x00,
+0x00,0x00,0x65,0x8c,0x00,0x00,0x00,0x00,0x00,0x00,0x85,0xac,0x04,0x00,0xa4,0xac,
+0x00,0x00,0x64,0xac,0x04,0x00,0x83,0xac,0x00,0x60,0x86,0x40,0x08,0x00,0xe0,0x03,
+0x00,0x00,0x00,0x00,0x02,0x24,0x04,0x00,0xff,0x00,0x84,0x30,0xc0,0x18,0x04,0x00,
+0x21,0x18,0x64,0x00,0x80,0x18,0x03,0x00,0x21,0x18,0x64,0x00,0x02,0x80,0x02,0x3c,
+0x68,0x15,0x42,0x24,0x80,0x18,0x03,0x00,0x21,0x18,0x62,0x00,0x78,0x51,0x64,0x8c,
+0xff,0xf1,0x02,0x24,0x24,0x20,0x82,0x00,0x08,0x00,0xe0,0x03,0x78,0x51,0x64,0xac,
+0x02,0x24,0x04,0x00,0xff,0x00,0x84,0x30,0xc0,0x18,0x04,0x00,0x21,0x18,0x64,0x00,
+0x80,0x18,0x03,0x00,0x21,0x18,0x64,0x00,0x02,0x80,0x02,0x3c,0x68,0x15,0x42,0x24,
+0x80,0x18,0x03,0x00,0x21,0x18,0x62,0x00,0x78,0x51,0x64,0x8c,0xff,0xf1,0x02,0x24,
+0x24,0x20,0x82,0x00,0x00,0x02,0x84,0x34,0x08,0x00,0xe0,0x03,0x78,0x51,0x64,0xac,
+0xe0,0xff,0xbd,0x27,0x10,0x00,0xb0,0xaf,0xc0,0x80,0x04,0x00,0x21,0x80,0x04,0x02,
+0x80,0x80,0x10,0x00,0x21,0x80,0x04,0x02,0x02,0x80,0x02,0x3c,0x68,0x15,0x42,0x24,
+0x80,0x80,0x10,0x00,0x21,0x80,0x02,0x02,0x1c,0x00,0xbf,0xaf,0x18,0x00,0xb2,0xaf,
+0x14,0x00,0xb1,0xaf,0x78,0x51,0x05,0x8e,0xff,0x1f,0x02,0x3c,0x25,0xb0,0x12,0x3c,
+0xff,0xff,0x42,0x34,0x70,0x51,0x02,0xae,0x84,0x01,0x43,0x36,0xf8,0xff,0x02,0x24,
+0x00,0x00,0x66,0x8c,0x24,0x28,0xa2,0x00,0xff,0xfe,0x02,0x24,0x24,0x28,0xa2,0x00,
+0xff,0xef,0x03,0x24,0x24,0x28,0xa3,0x00,0x74,0x51,0x06,0xae,0x78,0x51,0x05,0xae,
+0xce,0x0d,0x00,0x0c,0x21,0x88,0x80,0x00,0x7a,0x51,0x02,0x92,0x21,0x88,0x32,0x02,
+0x1c,0x00,0xbf,0x8f,0x60,0x01,0x22,0xa2,0x18,0x00,0xb2,0x8f,0x64,0x51,0x00,0xae,
+0x48,0x51,0x00,0xae,0x4c,0x51,0x00,0xae,0x50,0x51,0x00,0xae,0x54,0x51,0x00,0xae,
+0x58,0x51,0x00,0xae,0x5c,0x51,0x00,0xae,0x60,0x51,0x00,0xae,0x14,0x00,0xb1,0x8f,
+0x10,0x00,0xb0,0x8f,0x08,0x00,0xe0,0x03,0x20,0x00,0xbd,0x27,0xff,0x00,0xa5,0x30,
+0xc0,0x10,0x05,0x00,0x21,0x10,0x45,0x00,0x80,0x10,0x02,0x00,0x21,0x10,0x45,0x00,
+0x02,0x80,0x03,0x3c,0x68,0x15,0x63,0x24,0x80,0x10,0x02,0x00,0x21,0x10,0x43,0x00,
+0x78,0x51,0x43,0x8c,0x25,0xb0,0x05,0x3c,0xff,0x00,0xc6,0x30,0x21,0x30,0xc5,0x00,
+0xaf,0x01,0xc2,0x90,0x07,0x00,0x63,0x30,0x80,0x18,0x03,0x00,0x21,0x18,0x65,0x00,
+0xff,0x00,0x88,0x30,0xff,0x00,0x49,0x30,0x84,0x01,0x66,0x8c,0x21,0x50,0x00,0x00,
+0x21,0x58,0x00,0x00,0x2b,0x00,0x20,0x11,0x21,0x20,0x00,0x01,0x2b,0x00,0xc0,0x10,
+0x2b,0x10,0x09,0x01,0x21,0x28,0x00,0x00,0x3e,0x4f,0x00,0x08,0x01,0x00,0x07,0x24,
+0xff,0x00,0x65,0x30,0x1d,0x00,0xa2,0x2c,0x07,0x00,0x40,0x10,0xff,0xff,0x02,0x25,
+0x04,0x10,0xa7,0x00,0x24,0x10,0x46,0x00,0xf9,0xff,0x40,0x10,0x01,0x00,0xa3,0x24,
+0x21,0x58,0xa0,0x00,0xff,0xff,0x02,0x25,0xff,0x00,0x45,0x30,0x2b,0x18,0xab,0x00,
+0x0f,0x00,0x60,0x14,0x2b,0x10,0x49,0x01,0x01,0x00,0x04,0x24,0x04,0x10,0xa4,0x00,
+0x24,0x10,0x46,0x00,0xff,0xff,0xa7,0x24,0x04,0x00,0x40,0x10,0x01,0x00,0x43,0x25,
+0x17,0x00,0x49,0x11,0xff,0x00,0x6a,0x30,0x21,0x40,0xa0,0x00,0xff,0x00,0xe5,0x30,
+0x2b,0x10,0xab,0x00,0xf6,0xff,0x40,0x10,0x04,0x10,0xa4,0x00,0x2b,0x10,0x49,0x01,
+0x08,0x00,0x40,0x10,0x21,0x20,0x00,0x01,0x23,0x10,0x2a,0x01,0x2a,0x10,0x62,0x01,
+0x04,0x00,0x40,0x14,0x21,0x20,0x00,0x00,0x23,0x10,0x69,0x01,0x21,0x10,0x4a,0x00,
+0xff,0x00,0x44,0x30,0x08,0x00,0xe0,0x03,0x21,0x10,0x80,0x00,0xfd,0xff,0x40,0x14,
+0x21,0x20,0x00,0x00,0x23,0x10,0x09,0x01,0x5f,0x4f,0x00,0x08,0xff,0x00,0x44,0x30,
+0x21,0x20,0x00,0x01,0x08,0x00,0xe0,0x03,0x21,0x10,0x80,0x00,0xff,0x00,0x84,0x30,
+0xc0,0x10,0x04,0x00,0x21,0x10,0x44,0x00,0x80,0x10,0x02,0x00,0x21,0x10,0x44,0x00,
+0x02,0x80,0x03,0x3c,0x68,0x15,0x63,0x24,0x80,0x10,0x02,0x00,0x21,0x10,0x43,0x00,
+0x25,0xb0,0x06,0x3c,0x78,0x51,0x43,0x8c,0xff,0x00,0xa5,0x30,0x21,0x20,0x86,0x00,
+0x21,0x28,0xa6,0x00,0x60,0x01,0x82,0x90,0xaf,0x01,0xa4,0x90,0x07,0x00,0x63,0x30,
+0x80,0x18,0x03,0x00,0x21,0x18,0x66,0x00,0xff,0x00,0x48,0x30,0xff,0x00,0x89,0x30,
+0x84,0x01,0x66,0x8c,0x21,0x50,0x00,0x00,0x21,0x58,0x00,0x00,0x2b,0x00,0x20,0x11,
+0x21,0x20,0x00,0x01,0x2b,0x00,0xc0,0x10,0x2b,0x10,0x09,0x01,0x21,0x28,0x00,0x00,
+0x8c,0x4f,0x00,0x08,0x01,0x00,0x07,0x24,0xff,0x00,0x65,0x30,0x1d,0x00,0xa2,0x2c,
+0x07,0x00,0x40,0x10,0xff,0xff,0x02,0x25,0x04,0x10,0xa7,0x00,0x24,0x10,0x46,0x00,
+0xf9,0xff,0x40,0x10,0x01,0x00,0xa3,0x24,0x21,0x58,0xa0,0x00,0xff,0xff,0x02,0x25,
+0xff,0x00,0x45,0x30,0x2b,0x18,0xab,0x00,0x0f,0x00,0x60,0x14,0x2b,0x10,0x49,0x01,
+0x01,0x00,0x04,0x24,0x04,0x10,0xa4,0x00,0x24,0x10,0x46,0x00,0xff,0xff,0xa7,0x24,
+0x04,0x00,0x40,0x10,0x01,0x00,0x43,0x25,0x17,0x00,0x49,0x11,0xff,0x00,0x6a,0x30,
+0x21,0x40,0xa0,0x00,0xff,0x00,0xe5,0x30,0x2b,0x10,0xab,0x00,0xf6,0xff,0x40,0x10,
+0x04,0x10,0xa4,0x00,0x2b,0x10,0x49,0x01,0x08,0x00,0x40,0x10,0x21,0x20,0x00,0x01,
+0x23,0x10,0x2a,0x01,0x2a,0x10,0x62,0x01,0x04,0x00,0x40,0x14,0x21,0x20,0x00,0x00,
+0x23,0x10,0x69,0x01,0x21,0x10,0x4a,0x00,0xff,0x00,0x44,0x30,0x08,0x00,0xe0,0x03,
+0x21,0x10,0x80,0x00,0xfd,0xff,0x40,0x14,0x21,0x20,0x00,0x00,0x23,0x10,0x09,0x01,
+0xad,0x4f,0x00,0x08,0xff,0x00,0x44,0x30,0x21,0x20,0x00,0x01,0x08,0x00,0xe0,0x03,
+0x21,0x10,0x80,0x00,0xe0,0xff,0xbd,0x27,0x02,0x80,0x02,0x3c,0x10,0x00,0xb0,0xaf,
+0x68,0x15,0x50,0x24,0x18,0x00,0xb2,0xaf,0x14,0x00,0xb1,0xaf,0x1c,0x00,0xbf,0xaf,
+0x21,0x88,0x00,0x00,0x21,0x90,0x00,0x02,0xee,0x4e,0x00,0x0c,0x21,0x20,0x20,0x02,
+0x7a,0x51,0x02,0x92,0x21,0x28,0x00,0x00,0x80,0x10,0x02,0x00,0x21,0x10,0x52,0x00,
+0xec,0x44,0x44,0x8c,0x60,0x45,0x43,0x8c,0x00,0x00,0x00,0x00,0x21,0x18,0x64,0x00,
+0x42,0x18,0x03,0x00,0x44,0x51,0x03,0xae,0x21,0x10,0x05,0x02,0x01,0x00,0xa5,0x24,
+0x1d,0x00,0xa3,0x28,0xb6,0x51,0x40,0xa0,0x7c,0x51,0x40,0xa0,0xfa,0xff,0x60,0x14,
+0x99,0x51,0x40,0xa0,0x01,0x00,0x31,0x26,0x20,0x00,0x22,0x2a,0xd4,0x51,0x00,0xae,
+0xe9,0xff,0x40,0x14,0x94,0x00,0x10,0x26,0x1c,0x00,0xbf,0x8f,0x18,0x00,0xb2,0x8f,
+0x14,0x00,0xb1,0x8f,0x10,0x00,0xb0,0x8f,0x08,0x00,0xe0,0x03,0x20,0x00,0xbd,0x27,
+0xc8,0xff,0xbd,0x27,0x02,0x80,0x02,0x3c,0x30,0x00,0xbe,0xaf,0x28,0x00,0xb6,0xaf,
+0x68,0x15,0x46,0x24,0x34,0x00,0xbf,0xaf,0x2c,0x00,0xb7,0xaf,0x24,0x00,0xb5,0xaf,
+0x20,0x00,0xb4,0xaf,0x1c,0x00,0xb3,0xaf,0x18,0x00,0xb2,0xaf,0x14,0x00,0xb1,0xaf,
+0x10,0x00,0xb0,0xaf,0x8c,0x65,0xc2,0x8c,0xff,0x00,0x8d,0x30,0xff,0x00,0x03,0x24,
+0xff,0xff,0x42,0x38,0x21,0xf0,0x00,0x00,0xff,0xff,0x04,0x34,0x0a,0xf0,0x62,0x00,
+0x8c,0x65,0xc4,0xac,0xb0,0x00,0xa0,0x11,0x08,0x00,0x16,0x24,0x02,0x80,0x02,0x3c,
+0xb8,0x90,0x45,0x24,0x90,0x44,0xc4,0x24,0xff,0x4f,0x00,0x08,0x21,0x88,0x00,0x00,
+0x01,0x00,0x31,0x26,0x00,0x00,0x82,0xa0,0x1d,0x00,0x22,0x2a,0x0b,0x00,0x40,0x10,
+0x01,0x00,0x84,0x24,0x21,0x10,0x25,0x02,0x00,0x00,0x42,0x90,0x00,0x00,0x00,0x00,
+0xf7,0xff,0x40,0x10,0xfd,0xff,0x43,0x24,0x01,0x00,0x31,0x26,0x1d,0x00,0x22,0x2a,
+0x00,0x00,0x83,0xa0,0xf7,0xff,0x40,0x14,0x01,0x00,0x84,0x24,0x02,0x80,0x02,0x3c,
+0x68,0x15,0x4a,0x24,0x02,0x80,0x03,0x3c,0x02,0x80,0x02,0x3c,0x50,0x8e,0x6c,0x24,
+0xd8,0x8d,0x4b,0x24,0x21,0x88,0x00,0x00,0x21,0x48,0x00,0x00,0x21,0x30,0x00,0x00,
+0x21,0x40,0x2a,0x01,0x21,0x38,0x2c,0x01,0x21,0x10,0xe6,0x00,0x91,0x00,0x44,0x90,
+0x00,0x00,0x45,0x90,0x21,0x18,0x06,0x01,0x01,0x00,0xc6,0x24,0x05,0x00,0xc2,0x28,
+0xc5,0x43,0x64,0xa0,0xf8,0xff,0x40,0x14,0x34,0x43,0x65,0xa0,0x21,0x10,0x2b,0x02,
+0x1d,0x00,0x44,0x90,0x00,0x00,0x45,0x90,0x21,0x18,0x2a,0x02,0x01,0x00,0x31,0x26,
+0x1d,0x00,0x22,0x2a,0x73,0x44,0x64,0xa0,0x56,0x44,0x65,0xa0,0xeb,0xff,0x40,0x14,
+0x05,0x00,0x29,0x25,0xa6,0x00,0xa0,0x11,0x02,0x80,0x02,0x3c,0x68,0x15,0x48,0x24,
+0x02,0x80,0x03,0x3c,0x02,0x80,0x02,0x3c,0x4c,0x91,0x69,0x24,0xd8,0x90,0x47,0x24,
+0x21,0x88,0x00,0x00,0x80,0x18,0x11,0x00,0x21,0x10,0x69,0x00,0x21,0x20,0x67,0x00,
+0x00,0x00,0x46,0x8c,0x00,0x00,0x85,0x8c,0x01,0x00,0x31,0x26,0x21,0x18,0x68,0x00,
+0x04,0x00,0x22,0x2a,0xec,0x44,0x65,0xac,0xf6,0xff,0x40,0x14,0x60,0x45,0x66,0xac,
+0x02,0x80,0x02,0x3c,0x68,0x15,0x49,0x24,0x02,0x80,0x03,0x3c,0x02,0x80,0x02,0x3c,
+0x4c,0x91,0x68,0x24,0xd8,0x90,0x47,0x24,0x04,0x00,0x11,0x24,0x80,0x20,0x11,0x00,
+0x21,0x10,0x88,0x00,0x21,0x30,0x87,0x00,0x00,0x00,0x45,0x8c,0x00,0x00,0xc3,0x8c,
+0x01,0x00,0x31,0x26,0x21,0x20,0x89,0x00,0x82,0x28,0x05,0x00,0x82,0x18,0x03,0x00,
+0x1d,0x00,0x22,0x2a,0xec,0x44,0x83,0xac,0xf4,0xff,0x40,0x14,0x60,0x45,0x85,0xac,
+0x02,0x80,0x02,0x3c,0x68,0x15,0x55,0x24,0x21,0x88,0x00,0x00,0x21,0xb8,0xa0,0x02,
+0x21,0xa0,0x00,0x00,0x5a,0x50,0x00,0x08,0x21,0x90,0xa0,0x02,0x01,0x00,0x31,0x26,
+0x20,0x00,0x22,0x2a,0x94,0x00,0x52,0x26,0x38,0x00,0x40,0x10,0x94,0x00,0x94,0x26,
+0x78,0x51,0x44,0x8e,0x01,0x00,0x03,0x24,0x02,0x13,0x04,0x00,0x01,0x00,0x53,0x30,
+0xf6,0xff,0x63,0x16,0x07,0x00,0x82,0x30,0x25,0xb0,0x03,0x3c,0x80,0x10,0x02,0x00,
+0x21,0x10,0x43,0x00,0x84,0x01,0x45,0x8c,0x70,0x51,0x43,0x8e,0x21,0x20,0x20,0x02,
+0x24,0x28,0xa3,0x00,0xce,0x0d,0x00,0x0c,0x74,0x51,0x45,0xae,0x7a,0x51,0x44,0x92,
+0x5c,0x0d,0x00,0x0c,0xff,0x00,0x25,0x32,0x7a,0x51,0x50,0x92,0x00,0x00,0x00,0x00,
+0x21,0x20,0x00,0x02,0x63,0x0d,0x00,0x0c,0x80,0x80,0x10,0x00,0x21,0x80,0x17,0x02,
+0x48,0x51,0x40,0xae,0x4c,0x51,0x40,0xae,0x50,0x51,0x40,0xae,0x54,0x51,0x40,0xae,
+0x58,0x51,0x40,0xae,0x5c,0x51,0x40,0xae,0x60,0x51,0x40,0xae,0x64,0x51,0x40,0xae,
+0xec,0x44,0x04,0x8e,0x60,0x45,0x03,0x8e,0x26,0x10,0x53,0x00,0x21,0x30,0x00,0x00,
+0x21,0x18,0x64,0x00,0x42,0x18,0x03,0x00,0x04,0x00,0x04,0x24,0x0a,0xb0,0x82,0x00,
+0x44,0x51,0x43,0xae,0x21,0x20,0x95,0x02,0x21,0x10,0x86,0x00,0x01,0x00,0xc6,0x24,
+0x1d,0x00,0xc3,0x28,0xb6,0x51,0x40,0xa0,0x7c,0x51,0x40,0xa0,0xfa,0xff,0x60,0x14,
+0x99,0x51,0x40,0xa0,0x01,0x00,0x31,0x26,0x20,0x00,0x22,0x2a,0xd4,0x51,0x80,0xac,
+0x94,0x00,0x52,0x26,0xca,0xff,0x40,0x14,0x94,0x00,0x94,0x26,0x25,0xb0,0x02,0x3c,
+0x80,0x01,0x42,0x34,0x00,0x00,0x56,0xa0,0x03,0x00,0xc0,0x17,0x02,0x80,0x03,0x3c,
+0x68,0x15,0x62,0x24,0x8c,0x65,0x40,0xac,0x34,0x00,0xbf,0x8f,0x30,0x00,0xbe,0x8f,
+0x2c,0x00,0xb7,0x8f,0x28,0x00,0xb6,0x8f,0x24,0x00,0xb5,0x8f,0x20,0x00,0xb4,0x8f,
+0x1c,0x00,0xb3,0x8f,0x18,0x00,0xb2,0x8f,0x14,0x00,0xb1,0x8f,0x10,0x00,0xb0,0x8f,
+0x08,0x00,0xe0,0x03,0x38,0x00,0xbd,0x27,0x02,0x80,0x02,0x3c,0xb8,0x90,0x45,0x24,
+0x90,0x44,0xc4,0x24,0x21,0x88,0x00,0x00,0x21,0x10,0x25,0x02,0x00,0x00,0x43,0x90,
+0x01,0x00,0x31,0x26,0x1d,0x00,0x22,0x2a,0x00,0x00,0x83,0xa0,0xfa,0xff,0x40,0x14,
+0x01,0x00,0x84,0x24,0x02,0x80,0x02,0x3c,0x68,0x15,0x4a,0x24,0x02,0x80,0x03,0x3c,
+0x02,0x80,0x02,0x3c,0x74,0x8f,0x6c,0x24,0x14,0x8e,0x4b,0x24,0x21,0x88,0x00,0x00,
+0x21,0x48,0x00,0x00,0x21,0x30,0x00,0x00,0x21,0x40,0x2a,0x01,0x21,0x38,0x2c,0x01,
+0x21,0x10,0xe6,0x00,0x91,0x00,0x44,0x90,0x00,0x00,0x45,0x90,0x21,0x18,0x06,0x01,
+0x01,0x00,0xc6,0x24,0x05,0x00,0xc2,0x28,0xc5,0x43,0x64,0xa0,0xf8,0xff,0x40,0x14,
+0x34,0x43,0x65,0xa0,0x21,0x10,0x2b,0x02,0x1d,0x00,0x44,0x90,0x00,0x00,0x45,0x90,
+0x21,0x18,0x2a,0x02,0x01,0x00,0x31,0x26,0x1d,0x00,0x22,0x2a,0x73,0x44,0x64,0xa0,
+0x56,0x44,0x65,0xa0,0xeb,0xff,0x40,0x14,0x05,0x00,0x29,0x25,0x02,0x80,0x02,0x3c,
+0x68,0x15,0x49,0x24,0x02,0x80,0x03,0x3c,0x02,0x80,0x02,0x3c,0x4c,0x91,0x68,0x24,
+0xd8,0x90,0x47,0x24,0x21,0x88,0x00,0x00,0x80,0x18,0x11,0x00,0x21,0x10,0x68,0x00,
+0x21,0x20,0x67,0x00,0x00,0x00,0x46,0x8c,0x00,0x00,0x85,0x8c,0x01,0x00,0x31,0x26,
+0x21,0x18,0x69,0x00,0x1d,0x00,0x22,0x2a,0xec,0x44,0x65,0xac,0xf6,0xff,0x40,0x14,
+0x60,0x45,0x66,0xac,0x4f,0x50,0x00,0x08,0x02,0x80,0x02,0x3c,0xd8,0xff,0xbd,0x27,
+0xff,0xff,0x84,0x30,0x18,0x00,0xb2,0xaf,0xf0,0x01,0x92,0x30,0x02,0x91,0x12,0x00,
+0x14,0x00,0xb1,0xaf,0xc0,0x88,0x12,0x00,0x21,0x88,0x32,0x02,0x80,0x88,0x11,0x00,
+0x21,0x88,0x32,0x02,0x02,0x80,0x02,0x3c,0x68,0x15,0x42,0x24,0x80,0x88,0x11,0x00,
+0x21,0x88,0x22,0x02,0x20,0x00,0xbf,0xaf,0x1c,0x00,0xb3,0xaf,0x10,0x00,0xb0,0xaf,
+0x78,0x51,0x30,0x8e,0x00,0x02,0x82,0x30,0xff,0xfe,0x03,0x24,0x2b,0x10,0x02,0x00,
+0x00,0x10,0x10,0x36,0x24,0x80,0x03,0x02,0x00,0x12,0x02,0x00,0x25,0x80,0x02,0x02,
+0x70,0x51,0x25,0xae,0x78,0x51,0x30,0xae,0xa0,0x0e,0x00,0x0c,0x21,0x98,0xa0,0x00,
+0xf8,0xff,0x03,0x24,0x24,0x80,0x03,0x02,0x07,0x00,0x42,0x30,0x25,0x80,0x02,0x02,
+0x07,0x00,0x03,0x32,0x25,0xb0,0x02,0x3c,0x80,0x18,0x03,0x00,0x78,0x51,0x30,0xae,
+0x21,0x18,0x62,0x00,0x84,0x01,0x62,0x8c,0x21,0x20,0x40,0x02,0x24,0x10,0x53,0x00,
+0xce,0x0d,0x00,0x0c,0x74,0x51,0x22,0xae,0x7a,0x51,0x24,0x92,0x21,0x28,0x40,0x02,
+0x20,0x00,0xbf,0x8f,0x1c,0x00,0xb3,0x8f,0x18,0x00,0xb2,0x8f,0x14,0x00,0xb1,0x8f,
+0x10,0x00,0xb0,0x8f,0x5c,0x0d,0x00,0x08,0x28,0x00,0xbd,0x27,0xee,0x4e,0x00,0x08,
+0xff,0x00,0x84,0x30,0x02,0x80,0x02,0x3c,0x68,0x15,0x43,0x24,0x1f,0x00,0x04,0x24,
+0x78,0x51,0x62,0x8c,0xff,0xff,0x84,0x24,0x00,0x10,0x42,0x34,0x78,0x51,0x62,0xac,
+0xfb,0xff,0x81,0x04,0x94,0x00,0x63,0x24,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,
+0x78,0xff,0xbd,0x27,0x60,0x00,0xb0,0xaf,0x25,0xb0,0x10,0x3c,0x70,0x00,0xb4,0xaf,
+0xc4,0x02,0x14,0x36,0x00,0x00,0x80,0xae,0x74,0x00,0xb5,0xaf,0x6c,0x00,0xb3,0xaf,
+0x68,0x00,0xb2,0xaf,0x64,0x00,0xb1,0xaf,0x84,0x00,0xbf,0xaf,0x80,0x00,0xbe,0xaf,
+0x7c,0x00,0xb7,0xaf,0x78,0x00,0xb6,0xaf,0x04,0x00,0x02,0x36,0x04,0x0c,0x13,0x36,
+0x00,0x00,0x43,0x8c,0x00,0x00,0x62,0x8e,0x0f,0x00,0x11,0x3c,0x24,0x18,0x71,0x00,
+0x08,0x0c,0x12,0x36,0x4c,0x00,0xa2,0xaf,0x02,0xac,0x03,0x00,0x00,0x00,0x43,0x8e,
+0x00,0x00,0x00,0x00,0x50,0x00,0xa3,0xaf,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,
+0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,0x21,0x20,0x00,0x00,0xdd,0x44,0x00,0x0c,
+0xff,0xff,0x25,0x36,0x10,0x00,0xa2,0xaf,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,
+0x00,0x60,0x81,0x40,0xb3,0x0a,0x00,0x0c,0x64,0x00,0x04,0x24,0x7a,0x42,0x00,0x0c,
+0x01,0x00,0x04,0x24,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x01,0x00,0x21,0x38,
+0x00,0x60,0x81,0x40,0x21,0x20,0x00,0x00,0xdd,0x44,0x00,0x0c,0xff,0xff,0x25,0x36,
+0x14,0x00,0xa2,0xaf,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,
+0xb3,0x0a,0x00,0x0c,0x64,0x00,0x04,0x24,0x7a,0x42,0x00,0x0c,0x21,0x20,0x00,0x00,
+0xe0,0x0e,0x05,0x36,0x00,0x00,0xad,0x8c,0xdc,0x0e,0x06,0x36,0x70,0x0e,0x07,0x36,
+0x18,0x00,0xad,0xaf,0x00,0x00,0xc2,0x8c,0x74,0x0e,0x08,0x36,0x78,0x0e,0x09,0x36,
+0x1c,0x00,0xa2,0xaf,0x00,0x00,0xe3,0x8c,0x7c,0x0e,0x0a,0x36,0x80,0x0e,0x0b,0x36,
+0x20,0x00,0xa3,0xaf,0x00,0x00,0x0d,0x8d,0x84,0x0e,0x0c,0x36,0x88,0x0e,0x17,0x36,
+0x24,0x00,0xad,0xaf,0x00,0x00,0x22,0x8d,0x8c,0x0e,0x0e,0x36,0xd0,0x0e,0x18,0x36,
+0x28,0x00,0xa2,0xaf,0x00,0x00,0x43,0x8d,0xd8,0x0e,0x11,0x36,0xd4,0x0e,0x10,0x36,
+0x2c,0x00,0xa3,0xaf,0x00,0x00,0x6d,0x8d,0xed,0x3f,0x04,0x3c,0xfb,0x92,0x84,0x34,
+0x30,0x00,0xad,0xaf,0x00,0x00,0x82,0x8d,0x25,0xb0,0x1e,0x3c,0x21,0xb0,0x00,0x00,
+0x34,0x00,0xa2,0xaf,0x00,0x00,0xe3,0x8e,0xff,0x03,0x0f,0x3c,0x38,0x00,0xa3,0xaf,
+0x00,0x00,0xcd,0x8d,0x00,0x00,0x00,0x00,0x3c,0x00,0xad,0xaf,0x00,0x00,0x02,0x8f,
+0x00,0x00,0x00,0x00,0x40,0x00,0xa2,0xaf,0x00,0x00,0x03,0x8e,0x00,0x00,0x00,0x00,
+0x44,0x00,0xa3,0xaf,0x00,0x00,0x2d,0x8e,0x00,0x00,0x00,0x00,0x48,0x00,0xad,0xaf,
+0x00,0x00,0xa4,0xac,0x00,0x00,0xc4,0xac,0x00,0x00,0xe4,0xac,0x00,0x00,0x04,0xad,
+0x00,0x00,0x24,0xad,0x00,0x00,0x44,0xad,0x00,0x00,0x64,0xad,0x00,0x00,0x84,0xad,
+0x00,0x00,0xe4,0xae,0x00,0x00,0xc4,0xad,0x00,0x00,0x04,0xaf,0x00,0x00,0x04,0xae,
+0x00,0x00,0x24,0xae,0xd0,0x51,0x00,0x08,0x00,0x00,0x00,0x00,0x7a,0x00,0xa2,0x12,
+0x00,0x10,0x03,0x3c,0xac,0x0e,0xc2,0x37,0x94,0x0e,0xc3,0x37,0x25,0xb0,0x09,0x3c,
+0x00,0x00,0x4a,0x8c,0xbc,0x0e,0x29,0x35,0x00,0x00,0x64,0x8c,0xb4,0x0e,0xc2,0x37,
+0x9c,0x0e,0xc3,0x37,0x00,0x00,0x45,0x8c,0x00,0x00,0x66,0x8c,0x00,0x00,0x27,0x8d,
+0x24,0x20,0x8f,0x00,0x00,0xd8,0x02,0x3c,0x24,0x10,0x42,0x01,0x24,0x28,0xaf,0x00,
+0x24,0x30,0xcf,0x00,0x24,0x38,0xef,0x00,0x02,0x24,0x04,0x00,0x20,0x01,0x03,0x24,
+0x01,0x00,0x42,0x2c,0x02,0x2c,0x05,0x00,0x02,0x34,0x06,0x00,0xf2,0x00,0x83,0x10,
+0x02,0x3c,0x07,0x00,0xf0,0x00,0xa3,0x10,0x20,0x00,0x03,0x24,0xee,0x00,0xc3,0x10,
+0x00,0x00,0x00,0x00,0xec,0x00,0xe3,0x10,0x01,0x00,0x08,0x24,0x80,0x00,0x03,0x24,
+0x08,0x00,0x83,0x10,0x21,0x20,0x00,0x00,0x06,0x00,0xa3,0x10,0x21,0x20,0x00,0x00,
+0xe0,0x03,0x03,0x24,0x03,0x00,0xc3,0x10,0x00,0x00,0x00,0x00,0xe5,0x00,0xe3,0x10,
+0x01,0x00,0x04,0x24,0x06,0x00,0x40,0x10,0x09,0x00,0x02,0x24,0x04,0x00,0x00,0x11,
+0x00,0x00,0x00,0x00,0x6d,0x01,0x80,0x14,0x25,0xb0,0x12,0x3c,0x09,0x00,0x02,0x24,
+0xde,0x00,0xc2,0x12,0x25,0xb0,0x04,0x3c,0x01,0x00,0xd6,0x26,0x0a,0x00,0xc2,0x2e,
+0x1d,0x01,0x40,0x10,0x00,0x00,0x00,0x00,0xc8,0xff,0xa0,0x16,0x01,0x00,0x02,0x24,
+0xa0,0x00,0x03,0x3c,0x25,0xb0,0x09,0x3c,0x30,0x54,0x62,0x34,0x04,0x0c,0x29,0x35,
+0x00,0x00,0x22,0xad,0x25,0xb0,0x0d,0x3c,0x08,0x00,0x02,0x3c,0xe4,0x00,0x42,0x34,
+0x08,0x0c,0xad,0x35,0x25,0xb0,0x09,0x3c,0x00,0x00,0xa2,0xad,0x28,0x0e,0x29,0x35,
+0x80,0x80,0x02,0x3c,0x00,0x00,0x22,0xad,0x14,0x02,0x04,0x3c,0x16,0x68,0x02,0x3c,
+0x48,0x01,0x83,0x34,0x40,0x0e,0xc5,0x37,0x44,0x0e,0xc6,0x37,0xa2,0x04,0x42,0x34,
+0x25,0xb0,0x0d,0x3c,0x00,0x00,0xa3,0xac,0x4c,0x0e,0xad,0x35,0x00,0x00,0xc2,0xac,
+0xd1,0x28,0x02,0x24,0x00,0x00,0xa2,0xad,0x14,0x02,0x03,0x3c,0x16,0x28,0x02,0x3c,
+0x4d,0x01,0x63,0x34,0x60,0x0e,0xc7,0x37,0x64,0x0e,0xc8,0x37,0xba,0x08,0x42,0x34,
+0x00,0x00,0xe3,0xac,0x25,0xb0,0x06,0x3c,0x00,0x00,0x02,0xad,0x00,0xfb,0x0d,0x3c,
+0x25,0xb0,0x09,0x3c,0x00,0xf8,0x02,0x3c,0xd1,0x28,0x07,0x24,0x6c,0x0e,0xc6,0x34,
+0x48,0x0e,0x29,0x35,0x01,0x00,0x42,0x34,0x01,0x00,0xad,0x35,0x00,0x00,0xc7,0xac,
+0x03,0x00,0x04,0x24,0x00,0x00,0x2d,0xad,0x00,0x00,0x22,0xad,0x84,0x0a,0x00,0x0c,
+0x58,0x00,0xaf,0xaf,0xa0,0x00,0x04,0x3c,0x25,0xb0,0x03,0x3c,0x25,0xb0,0x06,0x3c,
+0x25,0xb0,0x07,0x3c,0xe4,0x00,0x02,0x24,0x33,0x54,0x84,0x34,0x04,0x0c,0x63,0x34,
+0x08,0x0c,0xc6,0x34,0x28,0x0e,0xe7,0x34,0x00,0x00,0x64,0xac,0x00,0x00,0xc2,0xac,
+0x00,0x00,0xe0,0xac,0x01,0x00,0x02,0x24,0x58,0x00,0xaf,0x8f,0x8a,0xff,0xa2,0x16,
+0xac,0x0e,0xc2,0x37,0x00,0x10,0x03,0x3c,0x1f,0xdc,0x79,0x34,0x1f,0x8c,0x7f,0x34,
+0x23,0x8c,0x6d,0x34,0xa0,0x00,0x03,0x3c,0x30,0x54,0x65,0x34,0x00,0x01,0x17,0x3c,
+0x25,0xb0,0x09,0x3c,0x25,0xb0,0x03,0x3c,0x00,0x01,0xe2,0x36,0x20,0x08,0x29,0x35,
+0x20,0x08,0x63,0x34,0x00,0x00,0x30,0x8d,0x00,0x00,0x62,0xac,0x25,0xb0,0x03,0x3c,
+0x28,0x08,0x63,0x34,0x00,0x00,0x62,0xac,0x25,0xb0,0x02,0x3c,0x04,0x0c,0x42,0x34,
+0x00,0x00,0x45,0xac,0x25,0xb0,0x03,0x3c,0x08,0x00,0x02,0x3c,0xe4,0x00,0x42,0x34,
+0x08,0x0c,0x63,0x34,0x00,0x00,0x62,0xac,0x25,0xb0,0x03,0x3c,0x00,0x7c,0xf3,0x36,
+0x00,0x48,0xf4,0x36,0x30,0x0e,0xc6,0x37,0x34,0x0e,0xc7,0x37,0x80,0x80,0x02,0x3c,
+0x28,0x0e,0x63,0x34,0x00,0x00,0x62,0xac,0x00,0x00,0xd3,0xac,0x00,0x00,0xf4,0xac,
+0x14,0x02,0x06,0x3c,0x16,0x68,0x07,0x3c,0x38,0x0e,0xc8,0x37,0x40,0x0e,0xca,0x37,
+0x44,0x0e,0xcb,0x37,0x3c,0x0e,0xc9,0x37,0x02,0x01,0xc6,0x34,0xc7,0x04,0xe7,0x34,
+0x00,0x00,0x19,0xad,0x25,0xb0,0x03,0x3c,0x00,0x00,0x3f,0xad,0x00,0x00,0x46,0xad,
+0x25,0xb0,0x09,0x3c,0x00,0x00,0x67,0xad,0x25,0xb0,0x06,0x3c,0x00,0x10,0x07,0x3c,
+0x50,0x0e,0xcc,0x37,0x58,0x0e,0xce,0x37,0x5c,0x0e,0xd8,0x37,0xd1,0x28,0x02,0x24,
+0x23,0xdc,0xe7,0x34,0x4c,0x0e,0x29,0x35,0x6c,0x0e,0x63,0x34,0x54,0x0e,0xc6,0x34,
+0x00,0x00,0x22,0xad,0x00,0x00,0x62,0xac,0x14,0x02,0x09,0x3c,0x00,0x00,0x93,0xad,
+0x25,0xb0,0x02,0x3c,0x00,0x00,0xd4,0xac,0x00,0x00,0xc7,0xad,0x00,0x00,0x0d,0xaf,
+0x16,0x28,0x0d,0x3c,0x48,0x0e,0x42,0x34,0x00,0xf8,0x06,0x3c,0x02,0x01,0x29,0x35,
+0x07,0x0d,0xad,0x35,0x00,0xfb,0x03,0x3c,0x60,0x0e,0xd1,0x37,0x64,0x0e,0xd2,0x37,
+0x00,0x00,0x29,0xae,0x03,0x00,0x04,0x24,0x00,0x00,0x4d,0xae,0x00,0x00,0x43,0xac,
+0x00,0x00,0x46,0xac,0x84,0x0a,0x00,0x0c,0x58,0x00,0xaf,0xaf,0x00,0x02,0x02,0x3c,
+0x25,0xb0,0x07,0x3c,0x25,0xb0,0x09,0x3c,0xd1,0x28,0x42,0x34,0x4c,0x0e,0xe7,0x34,
+0x6c,0x0e,0x29,0x35,0x25,0xb0,0x0d,0x3c,0x00,0x00,0xe2,0xac,0x48,0x0e,0xad,0x35,
+0x00,0x00,0x22,0xad,0x00,0xf8,0x03,0x3c,0x00,0xfb,0x02,0x3c,0x00,0x00,0xa2,0xad,
+0x03,0x00,0x04,0x24,0x00,0x00,0xa3,0xad,0x84,0x0a,0x00,0x0c,0x00,0x00,0x00,0x00,
+0x4c,0x00,0xa6,0x8f,0x25,0xb0,0x04,0x3c,0x04,0x0c,0x84,0x34,0x00,0x00,0x86,0xac,
+0x50,0x00,0xa9,0x8f,0x25,0xb0,0x07,0x3c,0x25,0xb0,0x0d,0x3c,0x00,0x01,0x10,0x32,
+0x08,0x0c,0xe7,0x34,0x28,0x0e,0xad,0x35,0x00,0x00,0xe9,0xac,0x2b,0x80,0x10,0x00,
+0x00,0x00,0xa0,0xad,0x58,0x00,0xaf,0x8f,0x17,0xff,0x00,0x16,0xac,0x0e,0xc2,0x37,
+0x25,0xb0,0x02,0x3c,0x25,0xb0,0x03,0x3c,0x20,0x08,0x42,0x34,0x28,0x08,0x63,0x34,
+0x00,0x00,0x57,0xac,0x25,0xb0,0x09,0x3c,0x00,0x00,0x77,0xac,0xac,0x0e,0xc2,0x37,
+0x94,0x0e,0xc3,0x37,0x00,0x00,0x4a,0x8c,0xbc,0x0e,0x29,0x35,0x00,0x00,0x64,0x8c,
+0xb4,0x0e,0xc2,0x37,0x9c,0x0e,0xc3,0x37,0x00,0x00,0x45,0x8c,0x00,0x00,0x66,0x8c,
+0x00,0x00,0x27,0x8d,0x24,0x20,0x8f,0x00,0x00,0xd8,0x02,0x3c,0x24,0x10,0x42,0x01,
+0x24,0x28,0xaf,0x00,0x24,0x30,0xcf,0x00,0x24,0x38,0xef,0x00,0x02,0x24,0x04,0x00,
+0x20,0x01,0x03,0x24,0x01,0x00,0x42,0x2c,0x02,0x2c,0x05,0x00,0x02,0x34,0x06,0x00,
+0x10,0xff,0x83,0x14,0x02,0x3c,0x07,0x00,0x80,0x00,0x03,0x24,0x16,0xff,0x83,0x14,
+0x21,0x40,0x00,0x00,0xc3,0x51,0x00,0x08,0x21,0x20,0x00,0x00,0xff,0xff,0x02,0x34,
+0xc4,0x02,0x84,0x34,0x00,0x00,0x82,0xac,0x94,0x0e,0xc3,0x37,0x9c,0x0e,0xc2,0x37,
+0xa4,0x0e,0xc4,0x37,0xac,0x0e,0xc7,0x37,0x00,0x00,0x66,0x8c,0x00,0x00,0x49,0x8c,
+0x00,0x00,0x8b,0x8c,0x00,0x00,0xe5,0x8c,0x02,0x80,0x07,0x3c,0x68,0x15,0xe7,0x24,
+0x0c,0x40,0xe3,0x8c,0x10,0x40,0xe4,0x8c,0xb4,0x0e,0xc2,0x37,0x00,0x00,0x47,0x8c,
+0x25,0xb0,0x0d,0x3c,0x00,0xfc,0x02,0x24,0x24,0x30,0xcf,0x00,0x24,0x28,0xaf,0x00,
+0xbc,0x0e,0xad,0x35,0x00,0x00,0xa8,0x8d,0x24,0x20,0x82,0x00,0x02,0x34,0x06,0x00,
+0x24,0x18,0x62,0x00,0x02,0x2c,0x05,0x00,0xc4,0x0e,0xca,0x37,0xcc,0x0e,0xcc,0x37,
+0xf0,0xff,0x02,0x3c,0xff,0x03,0x42,0x34,0x25,0x18,0x66,0x00,0x25,0x20,0x85,0x00,
+0x00,0x00,0x46,0x8d,0x24,0x48,0x2f,0x01,0x00,0x00,0x85,0x8d,0x24,0x38,0xef,0x00,
+0x24,0x20,0x82,0x00,0x24,0x18,0x62,0x00,0x82,0x49,0x09,0x00,0x82,0x39,0x07,0x00,
+0x0f,0xc0,0x02,0x3c,0xff,0xff,0x42,0x34,0x25,0x18,0x69,0x00,0x25,0x20,0x87,0x00,
+0x24,0x58,0x6f,0x01,0x24,0x40,0x0f,0x01,0x24,0x20,0x82,0x00,0x24,0x18,0x62,0x00,
+0x00,0x59,0x0b,0x00,0x00,0x41,0x08,0x00,0x24,0x30,0xcf,0x00,0x24,0x28,0xaf,0x00,
+0x02,0x80,0x02,0x3c,0x68,0x15,0x42,0x24,0x25,0x18,0x6b,0x00,0x25,0x20,0x88,0x00,
+0x02,0x34,0x06,0x00,0x02,0x2c,0x05,0x00,0x01,0x00,0xd6,0x26,0x0c,0x40,0x43,0xac,
+0x10,0x40,0x44,0xac,0x14,0x40,0x46,0xa4,0x16,0x40,0x45,0xa4,0x0a,0x00,0xc2,0x2e,
+0xe5,0xfe,0x40,0x14,0x00,0x00,0x00,0x00,0x18,0x00,0xad,0x8f,0x25,0xb0,0x02,0x3c,
+0xe0,0x0e,0x43,0x34,0x10,0x00,0xa6,0x8f,0x00,0x00,0x6d,0xac,0x1c,0x00,0xa3,0x8f,
+0xdc,0x0e,0x47,0x34,0x70,0x0e,0x48,0x34,0x00,0x00,0xe3,0xac,0x20,0x00,0xa7,0x8f,
+0x74,0x0e,0x49,0x34,0x78,0x0e,0x4a,0x34,0x00,0x00,0x07,0xad,0x24,0x00,0xad,0x8f,
+0x7c,0x0e,0x4b,0x34,0x80,0x0e,0x4c,0x34,0x00,0x00,0x2d,0xad,0x28,0x00,0xa3,0x8f,
+0x25,0xb0,0x0d,0x3c,0x84,0x0e,0xad,0x35,0x00,0x00,0x43,0xad,0x2c,0x00,0xa7,0x8f,
+0x88,0x0e,0x52,0x34,0x8c,0x0e,0x4e,0x34,0x00,0x00,0x67,0xad,0x30,0x00,0xa9,0x8f,
+0xd4,0x0e,0x51,0x34,0xd0,0x0e,0x42,0x34,0x00,0x00,0x89,0xad,0x34,0x00,0xa3,0x8f,
+0x0f,0x00,0x10,0x3c,0xff,0xff,0x05,0x36,0x00,0x00,0xa3,0xad,0x38,0x00,0xa7,0x8f,
+0x21,0x20,0x00,0x00,0x00,0x00,0x47,0xae,0x3c,0x00,0xa9,0x8f,0x00,0x00,0x00,0x00,
+0x00,0x00,0xc9,0xad,0x40,0x00,0xad,0x8f,0x00,0x00,0x00,0x00,0x00,0x00,0x4d,0xac,
+0x44,0x00,0xa2,0x8f,0x00,0x00,0x00,0x00,0x00,0x00,0x22,0xae,0x48,0x00,0xa3,0x8f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x43,0xae,0xba,0x44,0x00,0x0c,0x00,0x00,0x00,0x00,
+0xb3,0x0a,0x00,0x0c,0x64,0x00,0x04,0x24,0x7a,0x42,0x00,0x0c,0x01,0x00,0x04,0x24,
+0x14,0x00,0xa6,0x8f,0xff,0xff,0x05,0x36,0xba,0x44,0x00,0x0c,0x21,0x20,0x00,0x00,
+0xb3,0x0a,0x00,0x0c,0x64,0x00,0x04,0x24,0x84,0x00,0xbf,0x8f,0x80,0x00,0xbe,0x8f,
+0x7c,0x00,0xb7,0x8f,0x78,0x00,0xb6,0x8f,0x74,0x00,0xb5,0x8f,0x70,0x00,0xb4,0x8f,
+0x6c,0x00,0xb3,0x8f,0x68,0x00,0xb2,0x8f,0x64,0x00,0xb1,0x8f,0x60,0x00,0xb0,0x8f,
+0x21,0x20,0x00,0x00,0x7a,0x42,0x00,0x08,0x88,0x00,0xbd,0x27,0x94,0x0e,0x42,0x36,
+0x9c,0x0e,0x43,0x36,0xa4,0x0e,0x44,0x36,0xac,0x0e,0x45,0x36,0x02,0x80,0x0d,0x3c,
+0x00,0x00,0x47,0x8c,0x68,0x15,0xad,0x25,0x00,0x00,0x6a,0x8c,0x00,0x00,0x8c,0x8c,
+0x00,0x00,0xa3,0x8c,0x10,0x40,0xa4,0x8d,0xb4,0x0e,0x42,0x36,0x00,0x00,0x48,0x8c,
+0x0c,0x40,0xa5,0x8d,0x25,0xb0,0x02,0x3c,0x00,0xfc,0x13,0x24,0xbc,0x0e,0x42,0x34,
+0x24,0x18,0x6f,0x00,0x00,0x00,0x49,0x8c,0x02,0x1c,0x03,0x00,0x24,0x38,0xef,0x00,
+0x24,0x20,0x93,0x00,0xf0,0xff,0x06,0x3c,0x25,0x20,0x83,0x00,0xff,0x03,0xc6,0x34,
+0x02,0x3c,0x07,0x00,0xc4,0x0e,0x42,0x36,0x24,0x28,0xb3,0x00,0x24,0x40,0x0f,0x01,
+0xcc,0x0e,0x4b,0x36,0x25,0x28,0xa7,0x00,0x24,0x20,0x86,0x00,0x00,0x00,0x47,0x8c,
+0x24,0x50,0x4f,0x01,0x00,0x00,0x63,0x8d,0x82,0x41,0x08,0x00,0x0f,0xc0,0x02,0x3c,
+0xff,0xff,0x42,0x34,0x25,0x20,0x88,0x00,0x82,0x51,0x0a,0x00,0x24,0x28,0xa6,0x00,
+0x24,0x48,0x2f,0x01,0x24,0x88,0x82,0x00,0x25,0x28,0xaa,0x00,0x24,0x60,0x8f,0x01,
+0x00,0x49,0x09,0x00,0x25,0x88,0x29,0x02,0x24,0x28,0xa2,0x00,0x24,0x18,0x6f,0x00,
+0x00,0x61,0x0c,0x00,0x24,0x38,0xef,0x00,0x25,0x28,0xac,0x00,0x02,0x3c,0x07,0x00,
+0x02,0x1c,0x03,0x00,0x82,0x27,0x11,0x00,0x01,0x00,0x02,0x24,0x16,0x40,0xa3,0xa5,
+0x14,0x40,0xa7,0xa5,0x0c,0x40,0xa5,0xad,0x4a,0x00,0x82,0x10,0x10,0x40,0xb1,0xad,
+0x80,0x0c,0x4c,0x36,0x00,0x00,0x8a,0x8d,0x82,0x72,0x05,0x00,0xff,0x03,0xce,0x31,
+0x00,0x02,0xc3,0x31,0x25,0x10,0xd3,0x01,0x0b,0x70,0x43,0x00,0x82,0x85,0x0a,0x00,
+0x18,0x00,0xd0,0x01,0xff,0x03,0xaf,0x30,0x00,0x02,0xa3,0x30,0x25,0x10,0xf3,0x01,
+0x0b,0x78,0x43,0x00,0x02,0x75,0x11,0x00,0xff,0x03,0xce,0x31,0xc0,0xff,0x08,0x3c,
+0x25,0x18,0xd3,0x01,0x00,0x02,0xc2,0x31,0x00,0xfc,0x06,0x35,0x0b,0x70,0x62,0x00,
+0x24,0x38,0x46,0x01,0x94,0x0c,0x4a,0x36,0xff,0x0f,0x09,0x3c,0xff,0xff,0x29,0x35,
+0x88,0x0c,0x54,0x36,0x12,0x20,0x00,0x00,0x02,0x22,0x04,0x00,0x3f,0x00,0x82,0x30,
+0x18,0x00,0xf0,0x01,0x82,0x7a,0x11,0x00,0xff,0x03,0xef,0x31,0x00,0x14,0x02,0x00,
+0x25,0x38,0xe2,0x00,0x00,0x02,0xe3,0x31,0x25,0x10,0xf3,0x01,0x0b,0x78,0x43,0x00,
+0xc0,0x03,0x84,0x30,0x80,0x25,0x04,0x00,0x9c,0x0c,0x4b,0x36,0x12,0x28,0x00,0x00,
+0x02,0x2a,0x05,0x00,0xff,0x03,0xa2,0x30,0x25,0x10,0xe2,0x00,0x00,0x00,0x82,0xad,
+0x00,0x00,0x42,0x8d,0x00,0x00,0x00,0x00,0x24,0x10,0x49,0x00,0x25,0x10,0x44,0x00,
+0x00,0x00,0x42,0xad,0x00,0x00,0x8a,0x8e,0x00,0x00,0x00,0x00,0x24,0x40,0x48,0x01,
+0x82,0x85,0x08,0x00,0x18,0x00,0xd0,0x01,0x24,0x30,0x46,0x01,0x12,0x18,0x00,0x00,
+0x02,0x1a,0x03,0x00,0x3f,0x00,0x62,0x30,0x18,0x00,0xf0,0x01,0x00,0x14,0x02,0x00,
+0x25,0x30,0xc2,0x00,0xc0,0x03,0x63,0x30,0x80,0x1d,0x03,0x00,0x12,0x20,0x00,0x00,
+0x02,0x22,0x04,0x00,0xff,0x03,0x82,0x30,0x25,0x10,0xc2,0x00,0x00,0x00,0x82,0xae,
+0x00,0x00,0x62,0x8d,0x00,0x00,0x00,0x00,0x24,0x10,0x49,0x00,0x25,0x10,0x43,0x00,
+0x00,0x00,0x62,0xad,0x00,0x17,0x16,0x00,0x25,0xb0,0x03,0x3c,0xdd,0xdd,0x42,0x34,
+0xc4,0x02,0x63,0x34,0x00,0x00,0x62,0xac,0xec,0x52,0x00,0x08,0x00,0x00,0x00,0x00,
+0xe0,0xff,0xbd,0x27,0x44,0x00,0x02,0x24,0x10,0x00,0xa2,0xa3,0x49,0x00,0x03,0x24,
+0x47,0x00,0x02,0x24,0x02,0x80,0x07,0x3c,0x8c,0x97,0xe7,0x24,0x11,0x00,0xa3,0xa3,
+0x12,0x00,0xa2,0xa3,0x10,0x27,0x03,0x24,0x01,0x00,0x02,0x24,0x01,0x80,0x06,0x3c,
+0x10,0x00,0xa5,0x27,0x21,0x20,0xe0,0x00,0xe8,0x51,0xc6,0x24,0x0c,0x00,0xe3,0xac,
+0x14,0x00,0xe2,0xa0,0x18,0x00,0xbf,0xaf,0xfb,0x0c,0x00,0x0c,0x13,0x00,0xa0,0xa3,
+0x18,0x00,0xbf,0x8f,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,0x20,0x00,0xbd,0x27,
+0xd0,0xff,0xbd,0x27,0x25,0xb0,0x02,0x3c,0x20,0x00,0xb4,0xaf,0x1c,0x00,0xb3,0xaf,
+0x03,0x0d,0x44,0x34,0x2c,0x00,0xbf,0xaf,0x28,0x00,0xb6,0xaf,0x24,0x00,0xb5,0xaf,
+0x18,0x00,0xb2,0xaf,0x14,0x00,0xb1,0xaf,0x10,0x00,0xb0,0xaf,0x00,0x00,0x83,0x90,
+0x42,0x00,0x45,0x34,0xff,0x00,0x73,0x30,0x70,0x00,0x74,0x32,0x29,0x00,0x80,0x16,
+0x8f,0x00,0x62,0x32,0xff,0xff,0x02,0x24,0x00,0x00,0xa2,0xa0,0x00,0x60,0x01,0x40,
+0x01,0x00,0x21,0x34,0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,0x0f,0x00,0x11,0x3c,
+0x18,0x00,0x04,0x24,0xdd,0x44,0x00,0x0c,0xff,0xff,0x25,0x36,0x21,0x80,0x40,0x00,
+0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,0xb3,0x0a,0x00,0x0c,
+0x64,0x00,0x04,0x24,0x00,0x80,0x06,0x36,0xff,0xff,0x25,0x36,0xba,0x44,0x00,0x0c,
+0x18,0x00,0x04,0x24,0x84,0x0a,0x00,0x0c,0x03,0x00,0x04,0x24,0x21,0x30,0xa0,0x02,
+0xff,0xff,0x25,0x36,0x5c,0x00,0x80,0x16,0x21,0x20,0x00,0x00,0x2c,0x00,0xbf,0x8f,
+0x28,0x00,0xb6,0x8f,0x24,0x00,0xb5,0x8f,0x20,0x00,0xb4,0x8f,0x1c,0x00,0xb3,0x8f,
+0x18,0x00,0xb2,0x8f,0x14,0x00,0xb1,0x8f,0x10,0x00,0xb0,0x8f,0x25,0xb0,0x02,0x3c,
+0x42,0x00,0x42,0x34,0x30,0x00,0xbd,0x27,0x00,0x00,0x40,0xa0,0x08,0x00,0xe0,0x03,
+0x00,0x00,0x00,0x00,0x00,0x00,0x82,0xa0,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,
+0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,0x0f,0x00,0x11,0x3c,0x21,0x20,0x00,0x00,
+0xdd,0x44,0x00,0x0c,0xff,0xff,0x25,0x36,0x21,0xa8,0x40,0x00,0x00,0x60,0x01,0x40,
+0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,0xb3,0x0a,0x00,0x0c,0x64,0x00,0x04,0x24,
+0x7a,0x42,0x00,0x0c,0x01,0x00,0x04,0x24,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,
+0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,0x21,0x20,0x00,0x00,0xdd,0x44,0x00,0x0c,
+0xff,0xff,0x25,0x36,0x21,0xb0,0x40,0x00,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,
+0x00,0x60,0x81,0x40,0x64,0x00,0x04,0x24,0xb3,0x0a,0x00,0x0c,0x08,0x00,0x10,0x3c,
+0xff,0xff,0x10,0x36,0x7a,0x42,0x00,0x0c,0x21,0x20,0x00,0x00,0x01,0x00,0x12,0x3c,
+0x24,0x30,0xb0,0x02,0x25,0x30,0xd2,0x00,0xff,0xff,0x25,0x36,0xba,0x44,0x00,0x0c,
+0x21,0x20,0x00,0x00,0xb3,0x0a,0x00,0x0c,0x64,0x00,0x04,0x24,0x24,0x80,0xd0,0x02,
+0x7a,0x42,0x00,0x0c,0x01,0x00,0x04,0x24,0x25,0x30,0x12,0x02,0xff,0xff,0x25,0x36,
+0xba,0x44,0x00,0x0c,0x21,0x20,0x00,0x00,0xb3,0x0a,0x00,0x0c,0x64,0x00,0x04,0x24,
+0x7a,0x42,0x00,0x0c,0x21,0x20,0x00,0x00,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,
+0x01,0x00,0x21,0x38,0x00,0x60,0x81,0x40,0x0f,0x00,0x11,0x3c,0x18,0x00,0x04,0x24,
+0xdd,0x44,0x00,0x0c,0xff,0xff,0x25,0x36,0x21,0x80,0x40,0x00,0x00,0x60,0x01,0x40,
+0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,0xb3,0x0a,0x00,0x0c,0x64,0x00,0x04,0x24,
+0x00,0x80,0x06,0x36,0xff,0xff,0x25,0x36,0xba,0x44,0x00,0x0c,0x18,0x00,0x04,0x24,
+0x84,0x0a,0x00,0x0c,0x03,0x00,0x04,0x24,0x21,0x30,0xa0,0x02,0xff,0xff,0x25,0x36,
+0xa6,0xff,0x80,0x12,0x21,0x20,0x00,0x00,0x25,0xb0,0x02,0x3c,0x03,0x0d,0x42,0x34,
+0x00,0x00,0x53,0xa0,0xba,0x44,0x00,0x0c,0x00,0x00,0x00,0x00,0xb3,0x0a,0x00,0x0c,
+0x64,0x00,0x04,0x24,0x7a,0x42,0x00,0x0c,0x01,0x00,0x04,0x24,0xff,0xff,0x25,0x36,
+0x21,0x30,0xc0,0x02,0xba,0x44,0x00,0x0c,0x21,0x20,0x00,0x00,0xb3,0x0a,0x00,0x0c,
+0x64,0x00,0x04,0x24,0x2c,0x00,0xbf,0x8f,0x28,0x00,0xb6,0x8f,0x24,0x00,0xb5,0x8f,
+0x20,0x00,0xb4,0x8f,0x1c,0x00,0xb3,0x8f,0x18,0x00,0xb2,0x8f,0x14,0x00,0xb1,0x8f,
+0x10,0x00,0xb0,0x8f,0x21,0x20,0x00,0x00,0x7a,0x42,0x00,0x08,0x30,0x00,0xbd,0x27,
+0xd0,0xff,0xbd,0x27,0x28,0x00,0xb4,0xaf,0x02,0x80,0x14,0x3c,0x2c,0x00,0xbf,0xaf,
+0x24,0x00,0xb3,0xaf,0x20,0x00,0xb2,0xaf,0x1c,0x00,0xb1,0xaf,0x18,0x00,0xb0,0xaf,
+0x68,0x15,0x86,0x26,0x0c,0x40,0xc2,0x8c,0x00,0x00,0x00,0x00,0x82,0x17,0x02,0x00,
+0x01,0x00,0x42,0x30,0x07,0x00,0x40,0x14,0x68,0x15,0x85,0x26,0x08,0x40,0xc2,0x8c,
+0x01,0x00,0x03,0x24,0x42,0x17,0x02,0x00,0x03,0x00,0x42,0x30,0xf0,0x00,0x43,0x10,
+0x25,0xb0,0x02,0x3c,0x0c,0x40,0xa2,0x8c,0x01,0x00,0x03,0x24,0x82,0x17,0x02,0x00,
+0x01,0x00,0x44,0x30,0x0a,0x00,0x83,0x10,0x00,0x00,0x00,0x00,0x2c,0x00,0xbf,0x8f,
+0x28,0x00,0xb4,0x8f,0x24,0x00,0xb3,0x8f,0x20,0x00,0xb2,0x8f,0x1c,0x00,0xb1,0x8f,
+0x18,0x00,0xb0,0x8f,0x21,0x10,0x00,0x00,0x08,0x00,0xe0,0x03,0x30,0x00,0xbd,0x27,
+0x08,0x40,0xa2,0x8c,0x00,0x00,0x00,0x00,0x42,0x17,0x02,0x00,0x03,0x00,0x42,0x30,
+0xf2,0xff,0x44,0x14,0x25,0xb0,0x02,0x3c,0x0e,0x0c,0x44,0x34,0x00,0x00,0x83,0x90,
+0x00,0x01,0x02,0x24,0xff,0x00,0x63,0x30,0x01,0x00,0x63,0x24,0x8b,0x01,0x62,0x10,
+0x00,0x00,0x00,0x00,0x00,0x00,0x83,0xa0,0x68,0x15,0x84,0x26,0x10,0x40,0x82,0x8c,
+0x01,0x00,0x03,0x24,0x82,0x17,0x02,0x00,0xa4,0x01,0x43,0x10,0x0f,0x00,0x10,0x3c,
+0xc7,0x42,0x92,0x90,0x68,0x15,0x90,0x26,0xc6,0x42,0x03,0x92,0x25,0xb0,0x11,0x3c,
+0x62,0x0c,0x22,0x36,0x00,0x00,0x52,0xa0,0x17,0x01,0x60,0x10,0x01,0x00,0x02,0x24,
+0x03,0x0d,0x23,0x36,0x00,0x00,0x62,0x90,0x00,0x00,0x00,0x00,0x70,0x00,0x42,0x30,
+0x3e,0x01,0x40,0x14,0x63,0x0c,0x23,0x36,0xc4,0x42,0x02,0x96,0x00,0x00,0x00,0x00,
+0x23,0x20,0x52,0x00,0x2b,0x18,0x52,0x00,0x23,0x10,0x42,0x02,0x0a,0x10,0x83,0x00,
+0x03,0x00,0x42,0x2c,0x0b,0x01,0x40,0x10,0x00,0x00,0x00,0x00,0xc4,0x42,0x03,0x96,
+0x63,0x0c,0x22,0x36,0x00,0x00,0x43,0xa0,0x68,0x15,0x83,0x26,0xc3,0x42,0x62,0x90,
+0x08,0x40,0x66,0x8c,0xc2,0x42,0x72,0xa0,0x23,0x20,0x52,0x00,0x2b,0x38,0x42,0x02,
+0x23,0x50,0x42,0x02,0x02,0x2c,0x06,0x00,0x0b,0x50,0x87,0x00,0x3f,0x00,0xa5,0x30,
+0x3f,0x00,0xc4,0x30,0x24,0x00,0x02,0x24,0x20,0x00,0x03,0x24,0x23,0x10,0x44,0x00,
+0x2d,0x01,0x40,0x15,0x23,0x18,0x65,0x00,0x21,0x30,0x80,0x00,0x21,0x48,0xa0,0x00,
+0x02,0x80,0x0b,0x3c,0x68,0x15,0x83,0x26,0x80,0x10,0x06,0x00,0x21,0x10,0x43,0x00,
+0x0c,0x40,0x63,0x8c,0x18,0x40,0x44,0x8c,0xff,0x03,0x67,0x30,0x1b,0x01,0xe0,0x10,
+0x82,0x2d,0x04,0x00,0x00,0x02,0x62,0x30,0x04,0x00,0x40,0x10,0x18,0x00,0xe5,0x00,
+0x00,0xfc,0x02,0x24,0x25,0x38,0xe2,0x00,0x18,0x00,0xe5,0x00,0x82,0x22,0x03,0x00,
+0xff,0x03,0x84,0x30,0x00,0x02,0x83,0x30,0x12,0x10,0x00,0x00,0x02,0x12,0x02,0x00,
+0x03,0x00,0x60,0x10,0xff,0x03,0x48,0x30,0x00,0xfc,0x02,0x24,0x25,0x20,0x82,0x00,
+0x18,0x00,0x85,0x00,0x80,0x2d,0x05,0x00,0x25,0xb0,0x06,0x3c,0x80,0x0c,0xc7,0x34,
+0x94,0x0c,0xc6,0x34,0x12,0x20,0x00,0x00,0x02,0x22,0x04,0x00,0x3f,0x00,0x82,0x30,
+0x00,0x14,0x02,0x00,0x25,0x28,0xa2,0x00,0x25,0x28,0xa8,0x00,0x10,0x00,0xa5,0xaf,
+0x00,0x00,0xe5,0xac,0x00,0x00,0xc3,0x8c,0xff,0x0f,0x02,0x3c,0xc0,0x03,0x84,0x30,
+0xff,0xff,0x42,0x34,0x80,0x25,0x04,0x00,0x24,0x18,0x62,0x00,0x25,0x18,0x64,0x00,
+0x10,0x00,0xa3,0xaf,0x00,0x00,0xc3,0xac,0x68,0x15,0x83,0x26,0x08,0x40,0x62,0x8c,
+0x00,0x00,0x00,0x00,0x08,0x01,0x40,0x04,0xc0,0x28,0x09,0x00,0x21,0x28,0xa3,0x00,
+0xac,0x40,0xa3,0x90,0x25,0xb0,0x04,0x3c,0x22,0x0a,0x82,0x34,0x00,0x00,0x43,0xa0,
+0xad,0x40,0xa6,0x90,0x23,0x0a,0x82,0x34,0x24,0x0a,0x87,0x34,0x00,0x00,0x46,0xa0,
+0xae,0x40,0xa3,0x90,0x25,0x0a,0x86,0x34,0x26,0x0a,0x88,0x34,0x00,0x00,0xe3,0xa0,
+0xaf,0x40,0xa2,0x90,0x27,0x0a,0x87,0x34,0x28,0x0a,0x89,0x34,0x00,0x00,0xc2,0xa0,
+0xb0,0x40,0xa3,0x90,0x29,0x0a,0x84,0x34,0x00,0x00,0x03,0xa1,0xb1,0x40,0xa2,0x90,
+0x00,0x00,0x00,0x00,0x00,0x00,0xe2,0xa0,0xb2,0x40,0xa3,0x90,0x00,0x00,0x00,0x00,
+0x00,0x00,0x23,0xa1,0xb3,0x40,0xa2,0x90,0x00,0x00,0x00,0x00,0x00,0x00,0x82,0xa0,
+0x8e,0x7d,0x63,0x91,0x22,0x00,0x02,0x24,0x03,0x00,0x62,0x10,0x92,0x00,0x02,0x24,
+0x62,0xff,0x62,0x14,0x00,0x00,0x00,0x00,0x68,0x15,0x82,0x26,0x08,0x40,0x43,0x8c,
+0x01,0x00,0x44,0x39,0x24,0x00,0x02,0x24,0x02,0x1a,0x03,0x00,0x3f,0x00,0x63,0x30,
+0x01,0x00,0x84,0x30,0x04,0x01,0x80,0x10,0x23,0x28,0x43,0x00,0x42,0x18,0x0a,0x00,
+0x40,0x10,0x03,0x00,0x21,0x50,0x43,0x00,0x68,0x15,0x83,0x26,0xc3,0x42,0x62,0x90,
+0x00,0x00,0x00,0x00,0x2b,0x10,0x42,0x02,0x08,0x01,0x40,0x10,0x21,0x20,0x00,0x00,
+0x2b,0x10,0x45,0x01,0x07,0x00,0x40,0x10,0x24,0x00,0x04,0x24,0x08,0x40,0x62,0x8c,
+0x00,0x00,0x00,0x00,0x02,0x12,0x02,0x00,0x3f,0x00,0x42,0x30,0x21,0x20,0x4a,0x00,
+0x68,0x15,0x83,0x26,0x80,0x10,0x04,0x00,0x10,0x40,0x66,0x8c,0x21,0x10,0x43,0x00,
+0x18,0x40,0x44,0x8c,0x82,0x3a,0x06,0x00,0xff,0x03,0xe7,0x30,0xf0,0x00,0xe0,0x10,
+0x82,0x2d,0x04,0x00,0x00,0x02,0xe2,0x30,0x04,0x00,0x40,0x10,0x18,0x00,0xe5,0x00,
+0x00,0xfc,0x02,0x24,0x25,0x38,0xe2,0x00,0x18,0x00,0xe5,0x00,0x02,0x25,0x06,0x00,
+0xff,0x03,0x84,0x30,0x00,0x02,0x83,0x30,0x12,0x10,0x00,0x00,0x02,0x12,0x02,0x00,
+0x03,0x00,0x60,0x10,0xff,0x03,0x48,0x30,0x00,0xfc,0x02,0x24,0x25,0x20,0x82,0x00,
+0x18,0x00,0x85,0x00,0x80,0x2d,0x05,0x00,0x25,0xb0,0x06,0x3c,0x88,0x0c,0xc7,0x34,
+0x9c,0x0c,0xc6,0x34,0x12,0x20,0x00,0x00,0x02,0x22,0x04,0x00,0x3f,0x00,0x82,0x30,
+0x00,0x14,0x02,0x00,0x25,0x28,0xa2,0x00,0x25,0x28,0xa8,0x00,0x10,0x00,0xa5,0xaf,
+0x00,0x00,0xe5,0xac,0x00,0x00,0xc3,0x8c,0xff,0x0f,0x02,0x3c,0xc0,0x03,0x84,0x30,
+0xff,0xff,0x42,0x34,0x80,0x25,0x04,0x00,0x24,0x18,0x62,0x00,0x25,0x18,0x64,0x00,
+0x10,0x00,0xa3,0xaf,0x00,0x00,0xc3,0xac,0x95,0x54,0x00,0x08,0x00,0x00,0x00,0x00,
+0x80,0x0c,0x42,0x34,0x00,0x00,0x43,0x8c,0xc0,0xff,0x02,0x3c,0x21,0x88,0x00,0x00,
+0x24,0x28,0x62,0x00,0xc0,0xff,0x04,0x3c,0x8a,0x55,0x00,0x08,0x18,0x40,0xc3,0x24,
+0x01,0x00,0x31,0x26,0x25,0x00,0x22,0x2e,0x0d,0x00,0x40,0x10,0x02,0x80,0x0b,0x3c,
+0x00,0x00,0x62,0x8c,0x00,0x00,0x00,0x00,0x24,0x10,0x44,0x00,0xf8,0xff,0x45,0x14,
+0x04,0x00,0x63,0x24,0x08,0x40,0xc2,0x8c,0xc0,0xff,0x03,0x24,0x3f,0x00,0x24,0x32,
+0x24,0x10,0x43,0x00,0x25,0x10,0x44,0x00,0x08,0x40,0xc2,0xac,0x02,0x80,0x0b,0x3c,
+0x8e,0x7d,0x63,0x91,0x22,0x00,0x02,0x24,0x3e,0x00,0x62,0x10,0x92,0x00,0x02,0x24,
+0x3d,0x00,0x62,0x10,0x25,0xb0,0x02,0x3c,0x25,0xb0,0x02,0x3c,0x24,0x0a,0x42,0x34,
+0x00,0x00,0x44,0x8c,0x3f,0x3f,0x03,0x3c,0x3f,0x3f,0x63,0x34,0x24,0x20,0x83,0x00,
+0x02,0x80,0x02,0x3c,0x02,0x80,0x03,0x3c,0x16,0x56,0x53,0x24,0x1e,0x57,0x72,0x24,
+0x21,0x88,0x00,0x00,0xb1,0x55,0x00,0x08,0x10,0x00,0xa4,0xaf,0xd4,0x45,0x00,0x0c,
+0x00,0x00,0x00,0x00,0x47,0x00,0x40,0x10,0x68,0x15,0x85,0x26,0x01,0x00,0x31,0x26,
+0x21,0x00,0x22,0x2e,0x17,0x00,0x40,0x10,0x68,0x15,0x84,0x26,0xc0,0x80,0x11,0x00,
+0x10,0x00,0xa4,0x27,0x21,0x28,0x13,0x02,0xd4,0x45,0x00,0x0c,0x04,0x00,0x06,0x24,
+0x21,0x28,0x12,0x02,0x10,0x00,0xa4,0x27,0xf0,0xff,0x40,0x14,0x04,0x00,0x06,0x24,
+0x68,0x15,0x85,0x26,0x08,0x40,0xa3,0x8c,0xc0,0xff,0x02,0x3c,0xff,0xff,0x42,0x34,
+0x3f,0x00,0x24,0x32,0x24,0x18,0x62,0x00,0x00,0x24,0x04,0x00,0xff,0x7f,0x02,0x3c,
+0x25,0x18,0x64,0x00,0xff,0xff,0x42,0x34,0x24,0x18,0x62,0x00,0x08,0x40,0xa3,0xac,
+0x68,0x15,0x84,0x26,0x0c,0x40,0x83,0x8c,0x00,0x40,0x02,0x3c,0x25,0x18,0x62,0x00,
+0x25,0xb0,0x02,0x3c,0x0e,0x0c,0x42,0x34,0x0c,0x40,0x83,0xac,0x00,0x00,0x40,0xa0,
+0x8f,0x54,0x00,0x08,0x68,0x15,0x85,0x26,0xc6,0x42,0x02,0xa2,0xba,0x54,0x00,0x08,
+0xc4,0x42,0x12,0xa6,0xda,0x53,0x00,0x0c,0x00,0x00,0x00,0x00,0xc9,0x54,0x00,0x08,
+0xc4,0x42,0x12,0xa6,0x25,0xb0,0x02,0x3c,0x88,0x0c,0x42,0x34,0x00,0x00,0x44,0x8c,
+0x02,0x80,0x03,0x3c,0x68,0x15,0x66,0x24,0xc0,0xff,0x02,0x3c,0x24,0x28,0x82,0x00,
+0x21,0x88,0x00,0x00,0xc0,0xff,0x04,0x3c,0xe6,0x55,0x00,0x08,0x18,0x40,0xc3,0x24,
+0x01,0x00,0x31,0x26,0x25,0x00,0x22,0x2e,0xb8,0xff,0x40,0x10,0x25,0xb0,0x02,0x3c,
+0x00,0x00,0x62,0x8c,0x00,0x00,0x00,0x00,0x24,0x10,0x44,0x00,0xf8,0xff,0x45,0x14,
+0x04,0x00,0x63,0x24,0x08,0x40,0xc2,0x8c,0x3f,0x00,0x23,0x32,0xff,0xc0,0x04,0x24,
+0x24,0x10,0x44,0x00,0x00,0x1a,0x03,0x00,0x25,0x10,0x43,0x00,0x9c,0x55,0x00,0x08,
+0x08,0x40,0xc2,0xac,0x08,0x40,0xa3,0x8c,0xc0,0xff,0x02,0x3c,0xff,0xff,0x42,0x34,
+0x3f,0x00,0x24,0x32,0x24,0x18,0x62,0x00,0x00,0x24,0x04,0x00,0x25,0x18,0x64,0x00,
+0x00,0x80,0x02,0x3c,0xc5,0x55,0x00,0x08,0x25,0x18,0x62,0x00,0xcc,0xff,0x02,0x24,
+0x00,0x00,0x62,0xa0,0xcd,0x54,0x00,0x08,0x68,0x15,0x83,0x26,0x25,0xb0,0x02,0x3c,
+0x94,0x0c,0x43,0x34,0x80,0x0c,0x42,0x34,0x00,0x00,0x44,0xac,0x00,0x00,0x60,0xac,
+0x0d,0x55,0x00,0x08,0x68,0x15,0x83,0x26,0x2f,0x00,0xe0,0x10,0x21,0x30,0x00,0x00,
+0x2b,0x10,0x42,0x01,0x21,0x20,0x8a,0x00,0x00,0x00,0x42,0x38,0x24,0x00,0x06,0x24,
+0x2b,0x18,0x43,0x01,0x0b,0x30,0x82,0x00,0xcd,0xfe,0x60,0x10,0x20,0x00,0x09,0x24,
+0x68,0x15,0x83,0x26,0x0a,0x40,0x62,0x94,0x02,0x80,0x0b,0x3c,0x3f,0x00,0x42,0x30,
+0xe0,0x54,0x00,0x08,0x21,0x48,0x4a,0x00,0x21,0x28,0xa3,0x00,0xb4,0x41,0xa3,0x90,
+0x25,0xb0,0x04,0x3c,0x22,0x0a,0x82,0x34,0x00,0x00,0x43,0xa0,0xb5,0x41,0xa6,0x90,
+0x23,0x0a,0x82,0x34,0x24,0x0a,0x87,0x34,0x00,0x00,0x46,0xa0,0xb6,0x41,0xa3,0x90,
+0x25,0x0a,0x86,0x34,0x26,0x0a,0x88,0x34,0x00,0x00,0xe3,0xa0,0xb7,0x41,0xa2,0x90,
+0x27,0x0a,0x87,0x34,0x28,0x0a,0x89,0x34,0x00,0x00,0xc2,0xa0,0xb8,0x41,0xa3,0x90,
+0x29,0x0a,0x84,0x34,0x00,0x00,0x03,0xa1,0xb9,0x41,0xa2,0x90,0x00,0x00,0x00,0x00,
+0x00,0x00,0xe2,0xa0,0xba,0x41,0xa3,0x90,0x00,0x00,0x00,0x00,0x00,0x00,0x23,0xa1,
+0xbb,0x41,0xa2,0x90,0x2d,0x55,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xa0,
+0xad,0x54,0x00,0x08,0x68,0x15,0x84,0x26,0x23,0x10,0x8a,0x00,0x2b,0x18,0x44,0x01,
+0x2b,0x20,0x45,0x01,0x0b,0x30,0x43,0x00,0xa1,0xfe,0x80,0x14,0x23,0x48,0xaa,0x00,
+0xde,0x54,0x00,0x08,0x21,0x48,0x00,0x00,0xff,0xff,0x43,0x25,0x42,0x18,0x03,0x00,
+0x40,0x10,0x03,0x00,0x21,0x10,0x43,0x00,0x40,0x55,0x00,0x08,0x01,0x00,0x4a,0x24,
+0x25,0xb0,0x02,0x3c,0x9c,0x0c,0x43,0x34,0x88,0x0c,0x42,0x34,0x00,0x00,0x44,0xac,
+0x00,0x00,0x60,0xac,0x95,0x54,0x00,0x08,0x00,0x00,0x00,0x00,0x08,0x40,0x62,0x8c,
+0x00,0x00,0x00,0x00,0x02,0x12,0x02,0x00,0x3f,0x00,0x42,0x30,0x23,0x18,0x4a,0x00,
+0x2b,0x10,0x42,0x01,0x4e,0x55,0x00,0x08,0x0b,0x20,0x62,0x00,0xff,0xff,0x05,0x36,
+0x60,0x00,0x06,0x24,0xba,0x44,0x00,0x0c,0x24,0x00,0x04,0x24,0x84,0x0a,0x00,0x0c,
+0xe8,0x03,0x04,0x24,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x01,0x00,0x21,0x38,
+0x00,0x60,0x81,0x40,0x24,0x00,0x04,0x24,0xdd,0x44,0x00,0x0c,0xff,0xff,0x05,0x36,
+0x1f,0x00,0x52,0x30,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,
+0xb3,0x0a,0x00,0x0c,0x64,0x00,0x04,0x24,0xb4,0x54,0x00,0x08,0x68,0x15,0x90,0x26,
+0x00,0xff,0x84,0x30,0x02,0x22,0x04,0x00,0x08,0x00,0x80,0x10,0x02,0x80,0x02,0x3c,
+0xff,0x00,0x02,0x24,0x04,0x00,0x82,0x10,0xcc,0xff,0x03,0x24,0x02,0x80,0x02,0x3c,
+0x08,0x00,0xe0,0x03,0x4e,0x58,0x43,0xa0,0x02,0x80,0x02,0x3c,0x08,0x00,0xe0,0x03,
+0x4e,0x58,0x44,0xa0,0x02,0x24,0x04,0x00,0xff,0x00,0x84,0x30,0xc0,0x10,0x04,0x00,
+0x21,0x10,0x44,0x00,0x80,0x10,0x02,0x00,0x21,0x10,0x44,0x00,0x02,0x80,0x03,0x3c,
+0x80,0x10,0x02,0x00,0x68,0x15,0x63,0x24,0x20,0x00,0x84,0x2c,0x09,0x00,0x80,0x10,
+0x21,0x10,0x43,0x00,0x68,0x51,0x43,0x8c,0x25,0xb0,0x02,0x3c,0xc4,0x02,0x42,0x34,
+0x02,0x19,0x03,0x00,0x7f,0x00,0x63,0x30,0x00,0x00,0x43,0xac,0x08,0x00,0xe0,0x03,
+0x00,0x00,0x00,0x00,0x02,0x80,0x02,0x3c,0x44,0x79,0x43,0x8c,0x25,0xb0,0x02,0x3c,
+0xc4,0x02,0x42,0x34,0x02,0x19,0x03,0x00,0x7f,0x00,0x63,0x30,0x00,0x00,0x43,0xac,
+0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0xff,0x00,0x85,0x30,0xd2,0xff,0xa3,0x24,
+0xfe,0xff,0xa2,0x24,0xda,0xff,0xa4,0x24,0x04,0x00,0x63,0x2c,0x08,0x00,0x84,0x2c,
+0x06,0x00,0x60,0x14,0xff,0x00,0x42,0x30,0xf0,0xff,0xa2,0x24,0xfc,0xff,0xa3,0x24,
+0x16,0x00,0x46,0x2c,0x03,0x00,0x80,0x10,0xff,0x00,0x62,0x30,0x08,0x00,0xe0,0x03,
+0x00,0x00,0x00,0x00,0xfa,0xff,0xa3,0x24,0xfc,0xff,0xc0,0x10,0x21,0x10,0xa0,0x00,
+0x08,0x00,0xe0,0x03,0xff,0x00,0x62,0x30,0x25,0xb0,0x04,0x3c,0x03,0x0d,0x85,0x34,
+0x00,0x00,0xa3,0x90,0x2d,0x0a,0x84,0x34,0xff,0x00,0x63,0x30,0x08,0x00,0x63,0x34,
+0x00,0x00,0xa3,0xa0,0x00,0x00,0xa2,0x90,0x00,0x00,0x00,0x00,0xf7,0x00,0x42,0x30,
+0x00,0x00,0xa2,0xa0,0x00,0x00,0x83,0x90,0x00,0x00,0x00,0x00,0x3f,0x00,0x63,0x30,
+0x00,0x00,0x83,0xa0,0x00,0x00,0x82,0x90,0x80,0xff,0x03,0x24,0x25,0x10,0x43,0x00,
+0x00,0x00,0x82,0xa0,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x25,0xb0,0x02,0x3c,
+0xff,0x00,0x03,0x3c,0x82,0x01,0x49,0x34,0x81,0x01,0x48,0x34,0x24,0x10,0x83,0x00,
+0x02,0x3c,0x02,0x00,0x00,0xff,0x63,0x34,0x02,0x80,0x02,0x3c,0x68,0x15,0x45,0x24,
+0x02,0x32,0x04,0x00,0x01,0x00,0x02,0x24,0x24,0x20,0x83,0x00,0xc2,0x4c,0xa2,0xa0,
+0xb0,0x4c,0xa0,0xac,0xb4,0x4c,0xa0,0xac,0xb8,0x4c,0xa0,0xac,0x06,0x00,0x80,0x14,
+0xbc,0x4c,0xa0,0xac,0x00,0x00,0x02,0x91,0x00,0x00,0x23,0x91,0xc0,0x4c,0xa2,0xa0,
+0x08,0x00,0xe0,0x03,0xc1,0x4c,0xa3,0xa0,0xc1,0x4c,0xa7,0xa0,0x08,0x00,0xe0,0x03,
+0xc0,0x4c,0xa6,0xa0,0x02,0x80,0x03,0x3c,0x68,0x15,0x63,0x24,0xc1,0x4c,0x66,0x90,
+0xc0,0x4c,0x65,0x90,0x25,0xb0,0x02,0x3c,0x82,0x01,0x44,0x34,0x81,0x01,0x42,0x34,
+0x00,0x00,0x45,0xa0,0x00,0x00,0x86,0xa0,0x08,0x00,0xe0,0x03,0xc2,0x4c,0x60,0xa0,
+0x02,0x80,0x08,0x3c,0x68,0x15,0x04,0x25,0xc2,0x4c,0x82,0x90,0x00,0x00,0x00,0x00,
+0x15,0x00,0x40,0x10,0x21,0x18,0x00,0x00,0xb4,0x4c,0x82,0x8c,0xb0,0x4c,0x85,0x8c,
+0x25,0xb0,0x03,0x3c,0x40,0x11,0x02,0x00,0x2b,0x10,0xa2,0x00,0x82,0x01,0x67,0x34,
+0x0f,0x00,0x40,0x10,0x81,0x01,0x66,0x34,0xc1,0x4c,0x83,0x90,0xc0,0x4c,0x82,0x90,
+0xf0,0x00,0x63,0x30,0x1f,0x00,0x42,0x30,0x00,0x00,0xc2,0xa0,0x00,0x00,0xe3,0xa0,
+0x68,0x15,0x02,0x25,0x01,0x00,0x03,0x24,0xbc,0x4c,0x40,0xac,0xb0,0x4c,0x40,0xac,
+0xb4,0x4c,0x40,0xac,0xb8,0x4c,0x40,0xac,0x08,0x00,0xe0,0x03,0x21,0x10,0x60,0x00,
+0xb8,0x4c,0x82,0x8c,0x25,0xb0,0x03,0x3c,0x82,0x01,0x69,0x34,0x40,0x11,0x02,0x00,
+0x2b,0x10,0xa2,0x00,0x0e,0x00,0x40,0x14,0x81,0x01,0x66,0x34,0xbc,0x4c,0x82,0x8c,
+0x00,0x00,0x00,0x00,0x40,0x11,0x02,0x00,0x2b,0x10,0xa2,0x00,0x08,0x00,0x40,0x14,
+0x00,0x00,0x00,0x00,0xc1,0x4c,0x83,0x90,0xc0,0x4c,0x82,0x90,0x00,0x00,0x00,0x00,
+0x00,0x00,0xc2,0xa0,0x00,0x00,0x23,0xa1,0xf7,0x56,0x00,0x08,0x68,0x15,0x02,0x25,
+0xc1,0x4c,0x83,0x90,0xc0,0x4c,0x82,0x90,0xf0,0x00,0x63,0x30,0x7f,0x00,0x42,0x30,
+0x00,0x00,0xc2,0xa0,0x00,0x00,0x23,0xa1,0xf7,0x56,0x00,0x08,0x68,0x15,0x02,0x25,
+0x02,0x00,0x03,0x24,0x02,0x80,0x02,0x3c,0x08,0x00,0xe0,0x03,0x3d,0x58,0x43,0xa0,
+0xcc,0xff,0x03,0x24,0x02,0x80,0x02,0x3c,0x08,0x00,0xe0,0x03,0x3d,0x58,0x43,0xa0,
+0x25,0xb0,0x03,0x3c,0x33,0x02,0x65,0x34,0x00,0x11,0x04,0x00,0x00,0x00,0xa2,0xa0,
+0x30,0x02,0x63,0x34,0x00,0x00,0x65,0x8c,0x0f,0x00,0x02,0x3c,0xff,0xff,0x42,0x34,
+0x24,0x28,0xa2,0x00,0x01,0x00,0x03,0x24,0x04,0x18,0x83,0x00,0x02,0x00,0xa0,0x10,
+0x21,0x10,0x00,0x00,0xff,0xff,0x62,0x30,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,
+0xe0,0xff,0xbd,0x27,0x14,0x00,0xb1,0xaf,0x25,0xb0,0x11,0x3c,0x18,0x00,0xb2,0xaf,
+0x4c,0x00,0x22,0x36,0x1c,0x00,0xbf,0xaf,0x10,0x00,0xb0,0xaf,0x00,0x00,0x44,0x90,
+0x02,0x80,0x03,0x3c,0x02,0x00,0x02,0x24,0xff,0x00,0x84,0x30,0x07,0x00,0x82,0x10,
+0x68,0x15,0x72,0x24,0x1c,0x00,0xbf,0x8f,0x18,0x00,0xb2,0x8f,0x14,0x00,0xb1,0x8f,
+0x10,0x00,0xb0,0x8f,0x08,0x00,0xe0,0x03,0x20,0x00,0xbd,0x27,0xe6,0x63,0x43,0x96,
+0x01,0x00,0x02,0x24,0xf7,0xff,0x62,0x14,0x21,0x20,0x00,0x00,0x22,0x57,0x00,0x0c,
+0x00,0x00,0x00,0x00,0x04,0x00,0x04,0x24,0x22,0x57,0x00,0x0c,0x21,0x80,0x40,0x00,
+0x25,0x80,0x02,0x02,0x33,0x02,0x23,0x36,0x08,0x00,0x02,0x24,0xff,0xff,0x10,0x32,
+0x40,0x00,0x25,0x36,0x00,0x00,0x62,0xa0,0xea,0xff,0x00,0x16,0x00,0x00,0x00,0x00,
+0x00,0x00,0xa2,0x94,0xe4,0x63,0x43,0x96,0xff,0xdf,0x42,0x30,0x00,0x20,0x44,0x34,
+0x01,0x00,0x63,0x24,0xe4,0x63,0x43,0xa6,0x00,0x00,0xa2,0xa4,0x00,0x00,0xa4,0xa4,
+0x3f,0x57,0x00,0x08,0x00,0x00,0x00,0x00,0x01,0x80,0x03,0x3c,0x25,0xb0,0x02,0x3c,
+0x18,0x03,0x42,0x34,0x80,0x5d,0x63,0x24,0x00,0x00,0x43,0xac,0x63,0x00,0x02,0x24,
+0xff,0xff,0x42,0x24,0xff,0xff,0x41,0x04,0xff,0xff,0x42,0x24,0x02,0x80,0x02,0x3c,
+0x88,0x7d,0x45,0x94,0x02,0x80,0x03,0x3c,0x02,0x80,0x02,0x3c,0x8b,0x7d,0x66,0x90,
+0x98,0x7d,0x47,0x90,0x02,0x80,0x03,0x3c,0x02,0x80,0x02,0x3c,0xa3,0x7d,0x69,0x90,
+0xa5,0x7d,0x4a,0x90,0x02,0x80,0x03,0x3c,0x02,0x80,0x02,0x3c,0xa8,0x7d,0x6b,0x90,
+0xaa,0x7d,0x4c,0x90,0x07,0x00,0x03,0x24,0x02,0x80,0x02,0x3c,0x25,0xb0,0x04,0x3c,
+0x95,0x7d,0x43,0xa0,0xb0,0x03,0x84,0x34,0x02,0x80,0x02,0x3c,0x02,0x80,0x18,0x3c,
+0x8a,0x7d,0x08,0x93,0x00,0x00,0x85,0xac,0x96,0x7d,0x40,0xa0,0x02,0x80,0x02,0x3c,
+0x00,0x00,0x86,0xac,0x02,0x80,0x0f,0x3c,0x97,0x7d,0x40,0xa0,0x02,0x80,0x02,0x3c,
+0x00,0x00,0x87,0xac,0x68,0x15,0xee,0x25,0xb8,0x7d,0x40,0xa0,0xfd,0xff,0x02,0x24,
+0xd5,0x4a,0xc2,0xa1,0x01,0x00,0x03,0x24,0x00,0x78,0x02,0x24,0xd4,0x4a,0xc3,0xa1,
+0xd8,0x4a,0xc2,0xa5,0xff,0x07,0x03,0x24,0x0f,0x00,0x0d,0x31,0x02,0x00,0x02,0x24,
+0xda,0x4a,0xc3,0xa5,0x00,0x00,0x88,0xac,0x00,0x00,0x89,0xac,0x00,0x00,0x8a,0xac,
+0x00,0x00,0x8b,0xac,0x00,0x00,0x8c,0xac,0x17,0x00,0xa2,0x11,0x02,0x80,0x02,0x3c,
+0x8a,0x7d,0x02,0x93,0x01,0x00,0x03,0x24,0x0f,0x00,0x42,0x30,0x05,0x00,0x43,0x10,
+0x00,0x00,0x00,0x00,0x02,0x80,0x02,0x3c,0xca,0x7d,0x40,0xa4,0x08,0x00,0xe0,0x03,
+0x00,0x00,0x00,0x00,0x00,0x80,0x02,0x3c,0x68,0x15,0xe4,0x25,0x02,0xbc,0x42,0x34,
+0x68,0x4b,0x82,0xac,0x15,0x15,0x03,0x3c,0x02,0x02,0x02,0x3c,0x07,0x07,0x63,0x34,
+0x64,0x4b,0x82,0xac,0x02,0x80,0x02,0x3c,0x60,0x4b,0x83,0xac,0xca,0x7d,0x40,0xa4,
+0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x8f,0x7d,0x44,0x90,0x06,0x00,0x03,0x24,
+0x15,0x00,0x83,0x10,0x0b,0x00,0x02,0x24,0x0a,0x00,0x82,0x10,0x00,0xe0,0x02,0x3c,
+0x68,0x15,0xe4,0x25,0x00,0xb2,0x42,0x34,0x00,0x1c,0x03,0x3c,0x68,0x4b,0x82,0xac,
+0x00,0x1c,0x63,0x34,0x00,0x04,0x02,0x24,0x60,0x4b,0x83,0xac,0x9a,0x57,0x00,0x08,
+0x64,0x4b,0x82,0xac,0x00,0x80,0x02,0x3c,0x00,0xbc,0x42,0x34,0x15,0x15,0x03,0x3c,
+0x68,0x4b,0xc2,0xad,0x07,0x07,0x63,0x34,0x03,0x03,0x02,0x3c,0x60,0x4b,0xc3,0xad,
+0x9a,0x57,0x00,0x08,0x64,0x4b,0xc2,0xad,0x00,0xc0,0x02,0x3c,0x00,0xb2,0x42,0x34,
+0x1c,0x1c,0x03,0x3c,0x68,0x4b,0xc2,0xad,0x07,0x07,0x63,0x34,0x00,0x04,0x02,0x24,
+0x60,0x4b,0xc3,0xad,0x9a,0x57,0x00,0x08,0x64,0x4b,0xc2,0xad,0x25,0xb0,0x02,0x3c,
+0x4d,0x00,0x44,0x34,0xff,0x00,0x03,0x3c,0xec,0x02,0x42,0x34,0x00,0x00,0x43,0xac,
+0x00,0x00,0x80,0xa0,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x01,0x80,0x03,0x3c,
+0x25,0xb0,0x02,0x3c,0x64,0x5f,0x63,0x24,0x18,0x03,0x42,0x34,0x00,0x00,0x43,0xac,
+0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x7f,0x00,0x02,0x3c,0xfd,0xbf,0x45,0x34,
+0x80,0x04,0x03,0x3c,0x25,0x28,0xa3,0x00,0x00,0x08,0x04,0x3c,0x02,0x80,0x02,0x3c,
+0x68,0x15,0x42,0x24,0x25,0x28,0xa4,0x00,0x41,0xb0,0x03,0x3c,0x00,0x00,0x65,0xac,
+0x04,0x4b,0x45,0xac,0xfc,0x4a,0x45,0xac,0x08,0x00,0x63,0x34,0x86,0x00,0x05,0x24,
+0x00,0x00,0x65,0xa4,0x08,0x4b,0x45,0xa4,0x00,0x4b,0x40,0xac,0x0a,0x4b,0x40,0xa4,
+0x0c,0x4b,0x45,0xa4,0x00,0x60,0x01,0x40,0x01,0x00,0x21,0x34,0x00,0x60,0x81,0x40,
+0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0xf8,0x57,0x00,0x08,0x00,0x00,0x00,0x00,
+0x42,0xb0,0x02,0x3c,0xa0,0xff,0x03,0x24,0x01,0x00,0x42,0x34,0xe8,0xff,0xbd,0x27,
+0x21,0x20,0x00,0x00,0x01,0x00,0x05,0x24,0x00,0x01,0x06,0x24,0x00,0x00,0x43,0xa0,
+0x10,0x00,0xbf,0xaf,0xc4,0x0c,0x00,0x0c,0x00,0x00,0x00,0x00,0x10,0x00,0xbf,0x8f,
+0x03,0x00,0x04,0x24,0x01,0x00,0x05,0x24,0x40,0x1f,0x06,0x24,0xc4,0x0c,0x00,0x08,
+0x18,0x00,0xbd,0x27,0xe8,0xff,0xbd,0x27,0x10,0x00,0xb0,0xaf,0x14,0x00,0xbf,0xaf,
+0x21,0x5b,0x00,0x0c,0x00,0x00,0x00,0x00,0x02,0x80,0x02,0x3c,0x68,0x15,0x42,0x24,
+0x48,0x01,0x03,0x24,0xe0,0x63,0x43,0xac,0xdc,0x63,0x43,0xac,0x21,0x80,0x40,0x00,
+0x1f,0x00,0x03,0x24,0xff,0xff,0x63,0x24,0xc4,0x4c,0x40,0xa4,0xc6,0x4c,0x40,0xa4,
+0xc8,0x4c,0x40,0xa4,0xca,0x4c,0x40,0xa4,0xcc,0x4c,0x40,0xa4,0xce,0x4c,0x40,0xa4,
+0xd0,0x4c,0x40,0xa4,0xd2,0x4c,0x40,0xa4,0xd4,0x4c,0x40,0xa4,0xf5,0xff,0x61,0x04,
+0x24,0x00,0x42,0x24,0x25,0xb0,0x02,0x3c,0x10,0x00,0x03,0x24,0xb0,0x03,0x42,0x34,
+0x02,0x80,0x04,0x3c,0x8c,0x58,0x84,0x24,0x00,0x00,0x43,0xac,0x21,0x28,0x00,0x00,
+0x97,0x45,0x00,0x0c,0x04,0x00,0x06,0x24,0xef,0x5b,0x00,0x0c,0x00,0x00,0x00,0x00,
+0x71,0x5c,0x00,0x0c,0x8c,0x65,0x00,0xae,0xa7,0x5d,0x00,0x0c,0x00,0x00,0x00,0x00,
+0x4b,0x5e,0x00,0x0c,0x00,0x00,0x00,0x00,0x02,0x80,0x03,0x3c,0x8e,0x7d,0x64,0x90,
+0x92,0x00,0x02,0x24,0x03,0x00,0x82,0x10,0x00,0x00,0x00,0x00,0xf7,0x5d,0x00,0x0c,
+0x00,0x00,0x00,0x00,0xdd,0x5d,0x00,0x0c,0x00,0x00,0x00,0x00,0x8b,0x5c,0x00,0x0c,
+0x00,0x00,0x00,0x00,0xe4,0x63,0x00,0xa6,0x67,0x5e,0x00,0x0c,0xe6,0x63,0x00,0xa6,
+0x14,0x00,0xbf,0x8f,0x10,0x00,0xb0,0x8f,0x02,0x80,0x04,0x3c,0x02,0x80,0x05,0x3c,
+0xf8,0x7a,0x82,0x24,0x00,0x7b,0xa3,0x24,0x18,0x00,0xbd,0x27,0x04,0x00,0x42,0xac,
+0xf8,0x7a,0x82,0xac,0x00,0x7b,0xa3,0xac,0x08,0x00,0xe0,0x03,0x04,0x00,0x63,0xac,
+0xe8,0xff,0xbd,0x27,0x10,0x00,0xb0,0xaf,0x01,0x80,0x02,0x3c,0x25,0xb0,0x10,0x3c,
+0x18,0x03,0x03,0x36,0x38,0x61,0x42,0x24,0x00,0x00,0x62,0xac,0x14,0x00,0xbf,0xaf,
+0x60,0x57,0x00,0x0c,0x00,0x00,0x00,0x00,0xd5,0x58,0x00,0x0c,0x00,0x00,0x00,0x00,
+0x01,0x00,0x03,0x24,0x02,0x80,0x02,0x3c,0xfd,0x5a,0x00,0x0c,0xdb,0x60,0x43,0xa0,
+0xd1,0x57,0x00,0x0c,0x00,0x00,0x00,0x00,0x32,0x41,0x00,0x0c,0x00,0x00,0x00,0x00,
+0x0b,0x58,0x00,0x0c,0x00,0x00,0x00,0x00,0x44,0x00,0x03,0x36,0x00,0x00,0x62,0x94,
+0x00,0x00,0x00,0x00,0x40,0x00,0x42,0x34,0x00,0x00,0x62,0xa4,0xd9,0x57,0x00,0x0c,
+0x00,0x00,0x00,0x00,0xfa,0x57,0x00,0x0c,0x00,0x00,0x00,0x00,0xc9,0x5a,0x00,0x0c,
+0x00,0x00,0x00,0x00,0x8e,0x5a,0x00,0x0c,0x00,0x00,0x00,0x00,0x00,0x80,0x04,0x3c,
+0xb4,0x24,0x84,0x24,0xe6,0x5a,0x00,0x0c,0x01,0x00,0x05,0x24,0x01,0x80,0x04,0x3c,
+0x08,0x1e,0x84,0x24,0xe6,0x5a,0x00,0x0c,0x02,0x00,0x05,0x24,0x81,0x4e,0x00,0x0c,
+0x00,0x00,0x00,0x00,0x00,0x80,0x04,0x3c,0x54,0x34,0x84,0x24,0xe6,0x5a,0x00,0x0c,
+0x03,0x00,0x05,0x24,0x02,0x80,0x02,0x3c,0x98,0x7d,0x43,0x90,0x43,0x00,0x04,0x36,
+0x29,0x00,0x60,0x10,0xd8,0x00,0x10,0x36,0x07,0x00,0x02,0x24,0x2b,0x00,0x62,0x10,
+0x25,0xb0,0x04,0x3c,0x10,0x02,0x86,0x34,0x43,0x00,0x85,0x34,0x03,0x00,0x02,0x24,
+0x10,0x00,0x03,0x24,0x00,0x00,0xa2,0xa0,0xd8,0x00,0x84,0x34,0x00,0x00,0xc3,0xa0,
+0x00,0x00,0x82,0x90,0x80,0xff,0x03,0x24,0x42,0xb0,0x05,0x3c,0x25,0x10,0x43,0x00,
+0x00,0x00,0x82,0xa0,0x25,0xb0,0x04,0x3c,0x44,0x00,0x84,0x34,0x00,0x00,0x82,0x94,
+0x00,0x00,0x00,0x00,0xc0,0x00,0x42,0x34,0x00,0x00,0x82,0xa4,0x00,0x00,0xa3,0x90,
+0x00,0x00,0x00,0x00,0x01,0x00,0x63,0x34,0x00,0x00,0xa3,0xa0,0xe0,0x57,0x00,0x0c,
+0x00,0x00,0x00,0x00,0x02,0x80,0x04,0x3c,0x08,0x00,0x84,0x24,0x21,0x28,0x00,0x00,
+0x21,0x30,0x00,0x00,0x31,0x1c,0x00,0x0c,0x21,0x38,0x00,0x00,0xf8,0x57,0x00,0x0c,
+0x00,0x00,0x00,0x00,0x14,0x00,0xbf,0x8f,0x10,0x00,0xb0,0x8f,0x01,0x00,0x02,0x24,
+0x08,0x00,0xe0,0x03,0x18,0x00,0xbd,0x27,0x00,0x00,0x80,0xa0,0x00,0x00,0x03,0x92,
+0x80,0xff,0x02,0x24,0x25,0x18,0x62,0x00,0x00,0x00,0x03,0xa2,0x25,0xb0,0x04,0x3c,
+0x44,0x00,0x84,0x34,0x00,0x00,0x82,0x94,0x42,0xb0,0x05,0x3c,0xc0,0x00,0x42,0x34,
+0x00,0x00,0x82,0xa4,0x00,0x00,0xa3,0x90,0x00,0x00,0x00,0x00,0x01,0x00,0x63,0x34,
+0x00,0x00,0xa3,0xa0,0xe0,0x57,0x00,0x0c,0x00,0x00,0x00,0x00,0x02,0x80,0x04,0x3c,
+0x08,0x00,0x84,0x24,0x21,0x28,0x00,0x00,0x21,0x30,0x00,0x00,0x31,0x1c,0x00,0x0c,
+0x21,0x38,0x00,0x00,0xf8,0x57,0x00,0x0c,0x00,0x00,0x00,0x00,0x14,0x00,0xbf,0x8f,
+0x10,0x00,0xb0,0x8f,0x01,0x00,0x02,0x24,0x08,0x00,0xe0,0x03,0x18,0x00,0xbd,0x27,
+0x21,0x20,0x00,0x00,0x20,0xb0,0x06,0x3c,0xff,0xff,0x05,0x34,0x21,0x18,0x86,0x00,
+0x04,0x00,0x84,0x24,0x2a,0x10,0xa4,0x00,0x00,0x00,0x60,0xac,0xfb,0xff,0x40,0x10,
+0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0xb8,0xff,0xbd,0x27,
+0x25,0xb0,0x04,0x3c,0x44,0x00,0xbf,0xaf,0x40,0x00,0xbe,0xaf,0x3c,0x00,0xb7,0xaf,
+0x38,0x00,0xb6,0xaf,0x34,0x00,0xb5,0xaf,0x30,0x00,0xb4,0xaf,0x2c,0x00,0xb3,0xaf,
+0x28,0x00,0xb2,0xaf,0x24,0x00,0xb1,0xaf,0x20,0x00,0xb0,0xaf,0x0a,0x00,0x83,0x34,
+0x00,0x00,0x62,0x90,0x00,0x00,0x00,0x00,0x20,0x00,0x42,0x30,0x0c,0x00,0x40,0x10,
+0x4c,0x87,0x02,0x3c,0x00,0x00,0x62,0x90,0x00,0x00,0x00,0x00,0x10,0x00,0x42,0x30,
+0x66,0x01,0x40,0x10,0x4c,0x87,0x02,0x3c,0x54,0x00,0x83,0x34,0x50,0x00,0x82,0x34,
+0x00,0x00,0x45,0xac,0x00,0x00,0x65,0xa4,0xf9,0x58,0x00,0x08,0x02,0x80,0x03,0x3c,
+0x54,0x00,0x85,0x34,0x00,0xe0,0x42,0x34,0x50,0x00,0x84,0x34,0x12,0x01,0x03,0x24,
+0x00,0x00,0x82,0xac,0x00,0x00,0xa3,0xac,0x02,0x80,0x03,0x3c,0x68,0x15,0x62,0x24,
+0xd5,0x4a,0x43,0x90,0xda,0x4a,0x45,0x94,0x25,0xb0,0x1e,0x3c,0x1c,0x00,0xa3,0xa3,
+0x60,0x4b,0x43,0x8c,0x58,0x00,0xc6,0x37,0xff,0xff,0x04,0x24,0x10,0x00,0xa3,0xaf,
+0x64,0x4b,0x43,0x8c,0x5c,0x00,0xc7,0x37,0x60,0x00,0xc8,0x37,0x14,0x00,0xa3,0xaf,
+0x68,0x4b,0x42,0x8c,0x64,0x00,0xc9,0x37,0x8a,0x00,0xca,0x37,0x18,0x00,0xa2,0xaf,
+0x24,0x10,0x02,0x3c,0x21,0x28,0xa2,0x00,0x4c,0x81,0x02,0x3c,0x00,0xe0,0x42,0x34,
+0x00,0x00,0xc2,0xac,0x96,0x01,0x03,0x24,0x28,0x28,0x02,0x24,0x00,0x00,0xe3,0xac,
+0x89,0x00,0xcb,0x37,0x00,0x00,0x04,0xad,0x8c,0x00,0xcc,0x37,0x00,0x00,0x24,0xad,
+0x09,0x00,0x03,0x24,0x00,0x00,0x42,0xa5,0x10,0x10,0x02,0x24,0x00,0x00,0x63,0xa1,
+0x8e,0x00,0xcd,0x37,0x00,0x00,0x82,0xa5,0x0a,0x0a,0x03,0x24,0x13,0x00,0x02,0x24,
+0x90,0x00,0xce,0x37,0x00,0x00,0xa3,0xa5,0x00,0x00,0xc2,0xa1,0x25,0xb0,0x02,0x3c,
+0x40,0x00,0x03,0x24,0x91,0x00,0x42,0x34,0x00,0x00,0x43,0xa0,0x25,0xb0,0x03,0x3c,
+0x3a,0x01,0x02,0x24,0x92,0x00,0x63,0x34,0x00,0x00,0x62,0xa4,0xb5,0x00,0xd1,0x37,
+0x21,0x00,0x03,0x24,0x00,0x00,0x23,0xa2,0x10,0x00,0xa2,0x8f,0xa0,0x00,0xd2,0x37,
+0xa4,0x00,0xd3,0x37,0x00,0x00,0x42,0xae,0x14,0x00,0xa3,0x8f,0xa8,0x00,0xd4,0x37,
+0xac,0x00,0xd5,0x37,0x00,0x00,0x63,0xae,0x18,0x00,0xa2,0x8f,0x25,0xb0,0x03,0x3c,
+0xb0,0x00,0x63,0x34,0x00,0x00,0x82,0xae,0x21,0x10,0x02,0x3c,0xff,0x77,0x42,0x34,
+0x00,0x00,0xa2,0xae,0x25,0xb0,0x02,0x3c,0xd8,0x00,0x42,0x34,0x00,0x00,0x65,0xac,
+0x00,0x00,0x40,0xa0,0x1c,0x00,0xa2,0x93,0x25,0xb0,0x03,0x3c,0xb4,0x00,0x63,0x34,
+0x00,0x00,0x62,0xa0,0x25,0xb0,0x03,0x3c,0x04,0x00,0x02,0x24,0xb6,0x00,0x63,0x34,
+0x00,0x00,0x62,0xa0,0x25,0xb0,0x03,0x3c,0x0f,0x00,0x02,0x24,0xba,0x00,0x63,0x34,
+0xb9,0x00,0xdf,0x37,0x00,0x00,0xe4,0xa3,0x00,0x00,0x62,0xa4,0x25,0xb0,0x02,0x3c,
+0x1a,0x01,0x42,0x34,0x16,0x01,0xd0,0x37,0x18,0x01,0xcf,0x37,0x00,0x00,0x00,0xa6,
+0x25,0xb0,0x03,0x3c,0x00,0x00,0xe0,0xa5,0x00,0x00,0x40,0xa4,0xff,0xff,0x02,0x3c,
+0xff,0x0f,0x42,0x34,0xdc,0x00,0x63,0x34,0x00,0x00,0x62,0xac,0x2f,0x00,0x03,0x3c,
+0x25,0xb0,0x02,0x3c,0x32,0x32,0x63,0x34,0xd0,0x01,0x42,0x34,0x00,0x00,0x43,0xac,
+0x5e,0x00,0x02,0x3c,0x25,0xb0,0x03,0x3c,0x32,0x43,0x42,0x34,0xd4,0x01,0x63,0x34,
+0x00,0x00,0x62,0xac,0x08,0x00,0x03,0x3c,0x25,0xb0,0x02,0x3c,0x30,0xa5,0x63,0x34,
+0xd8,0x01,0x42,0x34,0x00,0x00,0x43,0xac,0xdc,0x01,0xc4,0x37,0x02,0x80,0x03,0x3c,
+0x49,0xa5,0x02,0x34,0x8e,0x7d,0x6d,0x90,0x00,0x00,0x82,0xac,0xc2,0x00,0x02,0x3c,
+0x1a,0x06,0x03,0x24,0x51,0x10,0x42,0x34,0xe0,0x01,0xc5,0x37,0xf4,0x01,0xc6,0x37,
+0xf8,0x01,0xc7,0x37,0x07,0x07,0x04,0x24,0x00,0x00,0xa3,0xa4,0x00,0x02,0xc8,0x37,
+0x00,0x00,0xc4,0xa4,0x26,0x00,0x03,0x24,0x00,0x00,0xe2,0xac,0x03,0x02,0xc9,0x37,
+0x04,0x00,0x02,0x24,0x00,0x00,0x03,0xa5,0x36,0x02,0xca,0x37,0x00,0x00,0x22,0xa1,
+0xc0,0x01,0x03,0x24,0x0c,0x00,0x02,0x24,0x34,0x02,0xcb,0x37,0x00,0x00,0x42,0xa1,
+0x37,0x02,0xcc,0x37,0x00,0x00,0x63,0xa5,0x03,0x00,0x02,0x24,0x22,0x00,0x03,0x24,
+0x00,0x00,0x82,0xa1,0xd6,0x00,0xa3,0x11,0x1b,0x1b,0x02,0x3c,0x13,0x13,0x02,0x3c,
+0x13,0x13,0x42,0x34,0x60,0x01,0xc3,0x37,0x64,0x01,0xc4,0x37,0x68,0x01,0xc5,0x37,
+0x7c,0x01,0xca,0x37,0x6c,0x01,0xc6,0x37,0x70,0x01,0xc7,0x37,0x74,0x01,0xc8,0x37,
+0x78,0x01,0xc9,0x37,0x00,0x00,0x62,0xac,0x00,0x00,0x82,0xac,0x02,0x80,0x03,0x3c,
+0x00,0x00,0xa2,0xac,0x00,0x00,0xc2,0xac,0x00,0x00,0xe2,0xac,0x00,0x00,0x02,0xad,
+0x00,0x00,0x22,0xad,0x00,0x00,0x42,0xad,0x8e,0x7d,0x65,0x90,0x25,0xb0,0x0c,0x3c,
+0x01,0x70,0x03,0x3c,0x80,0x01,0x82,0x35,0x08,0x5f,0x63,0x34,0x22,0x00,0x04,0x24,
+0x00,0x00,0x43,0xac,0xb5,0x00,0xa4,0x10,0x0f,0x1f,0x02,0x3c,0x92,0x00,0x02,0x24,
+0xb2,0x00,0xa2,0x10,0x0f,0x1f,0x02,0x3c,0x0f,0x10,0x02,0x3c,0x00,0xf0,0x51,0x34,
+0xf7,0x01,0x92,0x35,0x15,0xf0,0x4d,0x34,0x77,0x00,0x0e,0x24,0x84,0x01,0x87,0x35,
+0x88,0x01,0x88,0x35,0x10,0xf0,0x44,0x34,0x8c,0x01,0x85,0x35,0x05,0xf0,0x42,0x34,
+0x00,0x00,0xed,0xac,0x90,0x01,0x83,0x35,0x00,0x00,0x04,0xad,0x94,0x01,0x86,0x35,
+0x00,0x00,0xa2,0xac,0xf5,0x0f,0x02,0x24,0x00,0x00,0x71,0xac,0x25,0xb0,0x05,0x3c,
+0x00,0x00,0xc2,0xac,0x98,0x01,0x89,0x35,0x9c,0x01,0x8a,0x35,0xf0,0x0f,0x03,0x24,
+0x0d,0x00,0x02,0x24,0x00,0x00,0x23,0xad,0xa0,0x01,0x8b,0x35,0x00,0x00,0x42,0xad,
+0xa7,0x01,0xb7,0x34,0xf6,0x01,0x8c,0x35,0xff,0xff,0x02,0x24,0x00,0x00,0x6d,0xad,
+0x00,0x00,0x8e,0xa1,0x00,0x00,0x4e,0xa2,0x00,0x00,0xe2,0xa2,0x25,0xb0,0x02,0x3c,
+0xa8,0x01,0xb6,0x34,0xff,0xff,0x09,0x24,0xac,0x01,0x42,0x34,0x00,0x00,0xc9,0xae,
+0x03,0x04,0x04,0x3c,0x00,0x00,0x49,0xac,0x07,0x08,0x03,0x3c,0x25,0xb0,0x02,0x3c,
+0x01,0x02,0x84,0x34,0x05,0x06,0x63,0x34,0xb4,0x01,0xb1,0x34,0xb8,0x01,0xb2,0x34,
+0xbc,0x01,0xb3,0x34,0xb0,0x01,0x42,0x34,0x00,0x00,0x44,0xac,0x00,0x00,0x23,0xae,
+0x25,0xb0,0x02,0x3c,0x00,0x00,0x44,0xae,0x00,0x00,0x63,0xae,0x25,0xb0,0x03,0x3c,
+0x0c,0x00,0x06,0x24,0xc0,0x01,0xb4,0x34,0xc1,0x01,0xb5,0x34,0x0d,0x00,0x08,0x24,
+0xc2,0x01,0x63,0x34,0xc3,0x01,0x42,0x34,0x00,0x00,0x86,0xa2,0xc4,0x01,0xab,0x34,
+0x00,0x00,0xa6,0xa2,0xc5,0x01,0xac,0x34,0x00,0x00,0x66,0xa0,0x0e,0x00,0x07,0x24,
+0x00,0x00,0x48,0xa0,0xc6,0x01,0xaa,0x34,0xc7,0x01,0xad,0x34,0x0f,0x00,0x02,0x24,
+0x00,0x00,0x68,0xa1,0x00,0x00,0x87,0xa1,0x00,0x00,0x47,0xa1,0x00,0x00,0xa2,0xa1,
+0x57,0x01,0x02,0x3c,0x48,0x00,0xbf,0x34,0x46,0x00,0xae,0x34,0x0e,0xe2,0x42,0x34,
+0x00,0x00,0xc0,0xa5,0x4c,0x00,0xbe,0x34,0x00,0x00,0xe2,0xaf,0x4d,0x00,0xb9,0x34,
+0x80,0xff,0x02,0x24,0x00,0x00,0xc0,0xa3,0x00,0x00,0x22,0xa3,0x25,0xb0,0x02,0x3c,
+0xbc,0x00,0x03,0x24,0x40,0x00,0x42,0x34,0x00,0x00,0x43,0xa4,0x25,0xb0,0x03,0x3c,
+0x64,0x03,0xb8,0x34,0xfc,0x37,0x02,0x24,0x40,0x00,0x63,0x34,0x00,0x00,0x00,0xa3,
+0xd8,0x00,0xa7,0x34,0x00,0x00,0x62,0xa4,0x00,0x00,0xe3,0x90,0x2a,0xb0,0x04,0x3c,
+0x80,0xff,0x02,0x24,0x26,0xb0,0x06,0x3c,0x25,0x18,0x62,0x00,0x30,0x00,0x89,0x34,
+0x20,0x20,0x02,0x24,0x38,0x00,0x84,0x34,0x00,0x00,0xe3,0xa0,0x79,0x00,0xc8,0x34,
+0x00,0x00,0x82,0xa4,0x40,0x00,0x03,0x24,0x16,0x00,0x02,0x24,0x00,0x00,0x23,0xa1,
+0x94,0x00,0xaa,0x34,0x00,0x00,0x02,0xa1,0x98,0x00,0xab,0x34,0x64,0x00,0x03,0x24,
+0x22,0x00,0x02,0x24,0x00,0x00,0x43,0xa5,0x7c,0x00,0xd1,0x34,0x00,0x00,0x62,0xa5,
+0x04,0x00,0x12,0x24,0x9c,0x00,0xac,0x34,0x7a,0x00,0xc6,0x34,0x20,0x0c,0x02,0x24,
+0x0a,0x00,0x03,0x24,0x00,0x00,0xd2,0xa0,0x9a,0x00,0xad,0x34,0x00,0x00,0x22,0xa6,
+0x96,0x00,0xae,0x34,0x00,0x00,0x83,0xa1,0xff,0x03,0x02,0x24,0x02,0x00,0x03,0x24,
+0x00,0x00,0xa2,0xa5,0x00,0x00,0xc3,0xa5,0x25,0xb0,0x03,0x3c,0x20,0x00,0x02,0x24,
+0xb7,0x00,0x63,0x34,0x00,0x00,0x62,0xa0,0x25,0xb0,0x02,0x3c,0x09,0x00,0x03,0x24,
+0x89,0x00,0x42,0x34,0x00,0x00,0x43,0xa0,0x44,0x00,0xa5,0x34,0x00,0x00,0xa2,0x94,
+0x02,0x80,0x03,0x3c,0x68,0x15,0x66,0x24,0xff,0xfd,0x03,0x24,0x24,0x10,0x43,0x00,
+0x00,0x00,0xa2,0xa4,0x00,0x00,0xa3,0x94,0xd5,0x4a,0xc4,0x90,0x29,0xb0,0x02,0x3c,
+0x40,0x00,0x42,0x34,0x00,0x02,0x63,0x34,0x00,0x00,0xa3,0xa4,0x00,0x00,0x52,0xa0,
+0xd3,0x0a,0x00,0x0c,0x00,0x00,0x00,0x00,0x44,0x00,0xbf,0x8f,0x40,0x00,0xbe,0x8f,
+0x3c,0x00,0xb7,0x8f,0x38,0x00,0xb6,0x8f,0x34,0x00,0xb5,0x8f,0x30,0x00,0xb4,0x8f,
+0x2c,0x00,0xb3,0x8f,0x28,0x00,0xb2,0x8f,0x24,0x00,0xb1,0x8f,0x20,0x00,0xb0,0x8f,
+0x01,0x00,0x02,0x24,0x08,0x00,0xe0,0x03,0x48,0x00,0xbd,0x27,0x54,0x00,0x85,0x34,
+0x00,0xe0,0x42,0x34,0x50,0x00,0x84,0x34,0x12,0x01,0x03,0x24,0x00,0x00,0x82,0xac,
+0x00,0x00,0xa3,0xa4,0xf9,0x58,0x00,0x08,0x02,0x80,0x03,0x3c,0x00,0xf0,0x51,0x34,
+0xf7,0x01,0x92,0x35,0x15,0xf0,0x4d,0x34,0xad,0x59,0x00,0x08,0xff,0xff,0x0e,0x24,
+0x8b,0x59,0x00,0x08,0x1b,0x1b,0x42,0x34,0x25,0xb0,0x03,0x3c,0x25,0xb0,0x08,0x3c,
+0xfc,0x37,0x02,0x24,0x40,0x00,0x63,0x34,0x02,0x80,0x04,0x3c,0x00,0x00,0x62,0xa4,
+0x14,0x80,0x84,0x24,0xff,0x00,0x07,0x24,0xb0,0x03,0x06,0x35,0x00,0x00,0x83,0x94,
+0x00,0x00,0x00,0x00,0xff,0x00,0x62,0x30,0x21,0x18,0x68,0x00,0x0a,0x00,0x47,0x10,
+0xff,0x00,0x65,0x30,0x04,0x00,0x82,0x8c,0x00,0x00,0x00,0x00,0x00,0x00,0x62,0xac,
+0x00,0x00,0xc3,0xac,0x04,0x00,0x82,0x8c,0x08,0x00,0x84,0x24,0x00,0x00,0xc2,0xac,
+0xf2,0xff,0xa7,0x14,0x00,0x00,0x00,0x00,0x25,0xb0,0x08,0x3c,0x01,0x80,0x02,0x3c,
+0x0c,0x7a,0x44,0x24,0xff,0x00,0x07,0x24,0xb0,0x03,0x06,0x35,0x00,0x00,0x83,0x94,
+0x00,0x00,0x00,0x00,0xff,0x00,0x62,0x30,0x21,0x18,0x68,0x00,0x0a,0x00,0x47,0x10,
+0xff,0x00,0x65,0x30,0x04,0x00,0x82,0x8c,0x00,0x00,0x00,0x00,0x00,0x00,0x62,0xac,
+0x00,0x00,0xc3,0xac,0x04,0x00,0x82,0x8c,0x08,0x00,0x84,0x24,0x00,0x00,0xc2,0xac,
+0xf2,0xff,0xa7,0x14,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,
+0x01,0x80,0x02,0x3c,0x02,0x80,0x05,0x3c,0x10,0x6b,0x42,0x24,0x02,0x80,0x03,0x3c,
+0xcc,0x7d,0xa2,0xac,0x00,0x80,0x02,0x3c,0x6c,0x7e,0x60,0xac,0xcc,0x7d,0xa4,0x24,
+0x02,0x80,0x03,0x3c,0xc8,0x06,0x42,0x24,0x70,0x7e,0x60,0xa4,0x08,0x00,0x82,0xac,
+0x02,0x80,0x03,0x3c,0x00,0x80,0x02,0x3c,0x72,0x7e,0x60,0xa4,0x02,0x80,0x06,0x3c,
+0x08,0x0a,0x42,0x24,0x00,0x80,0x03,0x3c,0x74,0x7e,0xc7,0x24,0x14,0x00,0x82,0xac,
+0x38,0x08,0x63,0x24,0x02,0x80,0x02,0x3c,0x74,0x7e,0xc0,0xac,0x10,0x00,0x83,0xac,
+0x04,0x00,0xe0,0xac,0x7c,0x7e,0x40,0xa0,0x00,0x80,0x02,0x3c,0x88,0x19,0x42,0x24,
+0x3c,0x00,0x82,0xac,0x00,0x80,0x03,0x3c,0x00,0x80,0x02,0x3c,0x24,0x0c,0x63,0x24,
+0x78,0x0f,0x42,0x24,0x1c,0x00,0x83,0xac,0x20,0x00,0x82,0xac,0x00,0x80,0x03,0x3c,
+0x00,0x80,0x02,0x3c,0xc8,0x12,0x63,0x24,0x28,0x16,0x42,0x24,0x24,0x00,0x83,0xac,
+0x28,0x00,0x82,0xac,0x00,0x80,0x03,0x3c,0x01,0x80,0x02,0x3c,0x4c,0x1f,0x63,0x24,
+0xd0,0x04,0x42,0x24,0x2c,0x00,0x83,0xac,0x30,0x00,0x82,0xac,0x00,0x80,0x03,0x3c,
+0x00,0x80,0x02,0x3c,0xe4,0x19,0x63,0x24,0x00,0x03,0x42,0x24,0x38,0x00,0x83,0xac,
+0x08,0x00,0xe0,0x03,0x4c,0x00,0x82,0xac,0x25,0xb0,0x02,0x3c,0x08,0x00,0x42,0x34,
+0x00,0x00,0x43,0x8c,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x02,0x80,0x0e,0x3c,
+0x02,0x80,0x08,0x3c,0x02,0x80,0x02,0x3c,0x02,0x80,0x03,0x3c,0xf8,0x03,0x4d,0x24,
+0x00,0x14,0x6c,0x24,0x01,0x00,0x07,0x24,0x00,0x00,0xcb,0x25,0xff,0xff,0x0a,0x24,
+0x00,0x04,0x09,0x25,0x80,0x1a,0x07,0x00,0x21,0x10,0x6b,0x00,0x00,0x00,0x42,0xac,
+0x90,0x00,0x4a,0xac,0x00,0x04,0x04,0x8d,0x01,0x00,0xe7,0x24,0x08,0x00,0x45,0x24,
+0x21,0x18,0x6d,0x00,0x05,0x00,0xe6,0x28,0x04,0x00,0x82,0xac,0x00,0x00,0x44,0xac,
+0x04,0x00,0x49,0xac,0x00,0x04,0x02,0xad,0x8c,0x00,0x40,0xac,0x6c,0x00,0xa3,0xac,
+0xf0,0xff,0xc0,0x14,0x68,0x00,0xac,0xac,0x08,0x00,0xe0,0x03,0x00,0x00,0xc9,0xad,
+0x05,0x00,0xa2,0x2c,0x13,0x00,0x40,0x10,0xff,0xff,0x07,0x24,0x02,0x80,0x02,0x3c,
+0x80,0x1a,0x05,0x00,0x00,0x00,0x42,0x24,0x0e,0x00,0xa0,0x10,0x21,0x30,0x62,0x00,
+0x90,0x00,0xc3,0x8c,0xff,0xff,0x02,0x24,0x0a,0x00,0x62,0x14,0x00,0x00,0x00,0x00,
+0x8c,0x00,0xc2,0x8c,0x00,0x00,0x00,0x00,0x06,0x00,0x40,0x14,0x00,0x00,0x00,0x00,
+0x01,0x00,0x02,0x24,0x88,0x00,0xc4,0xac,0x8c,0x00,0xc2,0xac,0x90,0x00,0xc5,0xac,
+0x21,0x38,0xa0,0x00,0x08,0x00,0xe0,0x03,0x21,0x10,0xe0,0x00,0x25,0xb0,0x04,0x3c,
+0x01,0x80,0x02,0x3c,0x18,0x03,0x85,0x34,0xf4,0x6b,0x42,0x24,0xe0,0xff,0xbd,0x27,
+0x00,0x00,0xa2,0xac,0x1b,0x00,0x86,0x34,0xdb,0xff,0x03,0x24,0x27,0x00,0x84,0x34,
+0x07,0x00,0x02,0x24,0x14,0x00,0xb1,0xaf,0x10,0x00,0xb0,0xaf,0x00,0x00,0x83,0xa0,
+0x18,0x00,0xbf,0xaf,0x00,0x00,0xc2,0xa0,0x01,0x00,0x11,0x24,0x21,0x80,0x00,0x00,
+0x7a,0x42,0x00,0x0c,0x21,0x20,0x00,0x02,0x01,0x00,0x02,0x26,0xff,0x00,0x50,0x30,
+0x2b,0x18,0x30,0x02,0xfa,0xff,0x60,0x10,0x00,0x00,0x00,0x00,0x7a,0x42,0x00,0x0c,
+0x21,0x20,0x00,0x00,0x18,0x00,0xbf,0x8f,0x14,0x00,0xb1,0x8f,0x10,0x00,0xb0,0x8f,
+0x01,0x00,0x02,0x24,0x08,0x00,0xe0,0x03,0x20,0x00,0xbd,0x27,0x08,0x00,0xe0,0x03,
+0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,0x00,0x00,0x00,0x00,0x02,0x80,0x02,0x3c,
+0x68,0x15,0x42,0x24,0x40,0x10,0x03,0x3c,0xff,0xff,0x44,0x30,0x25,0xc0,0x83,0x00,
+0x94,0x64,0x58,0xac,0x40,0x00,0x18,0x27,0xa0,0x64,0x58,0xac,0x40,0x00,0x18,0x27,
+0xac,0x64,0x58,0xac,0x40,0x00,0x18,0x27,0xb8,0x64,0x58,0xac,0x40,0x00,0x18,0x27,
+0xe0,0xff,0xbd,0x27,0xc4,0x64,0x58,0xac,0x40,0x00,0x18,0x27,0x1c,0x00,0xb7,0xaf,
+0x18,0x00,0xb6,0xaf,0x14,0x00,0xb5,0xaf,0x10,0x00,0xb4,0xaf,0x0c,0x00,0xb3,0xaf,
+0x08,0x00,0xb2,0xaf,0x04,0x00,0xb1,0xaf,0x00,0x00,0xb0,0xaf,0xd0,0x64,0x58,0xac,
+0xa0,0x64,0x45,0x8c,0xac,0x64,0x46,0x8c,0xb8,0x64,0x47,0x8c,0xc4,0x64,0x48,0x8c,
+0xd0,0x64,0x49,0x8c,0x40,0x00,0x18,0x27,0xdc,0x64,0x58,0xac,0x21,0x50,0x00,0x03,
+0x25,0x20,0x83,0x00,0x40,0x00,0x18,0x27,0x20,0x10,0x03,0x3c,0x90,0x64,0x44,0xac,
+0x9c,0x64,0x45,0xac,0xa8,0x64,0x46,0xac,0xb4,0x64,0x47,0xac,0xc0,0x64,0x48,0xac,
+0xcc,0x64,0x49,0xac,0x25,0xb0,0x06,0x3c,0x28,0x64,0x43,0xac,0x24,0x64,0x43,0xac,
+0x34,0x64,0x43,0xac,0x30,0x64,0x43,0xac,0x40,0x64,0x43,0xac,0x3c,0x64,0x43,0xac,
+0x4c,0x64,0x43,0xac,0x48,0x64,0x43,0xac,0xe8,0x64,0x58,0xac,0x00,0x02,0x18,0x27,
+0xd8,0x64,0x4a,0xac,0x00,0x65,0x58,0xac,0x58,0x64,0x43,0xac,0x54,0x64,0x43,0xac,
+0x64,0x64,0x43,0xac,0x60,0x64,0x43,0xac,0x70,0x64,0x43,0xac,0x6c,0x64,0x43,0xac,
+0xac,0x00,0xc4,0x34,0xb0,0x00,0xc5,0x34,0x00,0x00,0x92,0x8c,0xe8,0x64,0x50,0x8c,
+0x00,0x00,0xb3,0x8c,0x21,0x10,0x04,0x3c,0x23,0x10,0x09,0x3c,0x22,0x10,0x0c,0x3c,
+0x02,0x80,0x14,0x3c,0x02,0x80,0x15,0x3c,0x02,0x80,0x16,0x3c,0x02,0x80,0x17,0x3c,
+0x24,0x10,0x05,0x3c,0x21,0x88,0x00,0x03,0x08,0x7b,0x87,0x26,0x00,0x04,0x18,0x27,
+0x10,0x7b,0xa8,0x26,0x18,0x7b,0xca,0x26,0x20,0x7b,0xeb,0x26,0x00,0x04,0x2d,0x35,
+0x00,0x40,0x8e,0x34,0x00,0x80,0x8f,0x35,0x00,0x01,0xc6,0x34,0xe4,0x64,0x50,0xac,
+0xfc,0x64,0x51,0xac,0x64,0x65,0x4d,0xac,0x28,0x65,0x52,0xac,0x34,0x65,0x4e,0xac,
+0x58,0x65,0x4f,0xac,0x4c,0x65,0x53,0xac,0x00,0x00,0xc5,0xac,0x48,0x65,0x45,0xac,
+0x68,0x65,0x43,0xac,0x74,0x65,0x58,0xac,0x7c,0x64,0x43,0xac,0x78,0x64,0x43,0xac,
+0x06,0x65,0x40,0xa4,0x05,0x65,0x40,0xa0,0x04,0x65,0x40,0xa0,0x5c,0x65,0x49,0xac,
+0x60,0x65,0x49,0xac,0x20,0x65,0x44,0xac,0x24,0x65,0x44,0xac,0x2c,0x65,0x44,0xac,
+0x30,0x65,0x44,0xac,0x50,0x65,0x4c,0xac,0x54,0x65,0x4c,0xac,0x44,0x65,0x45,0xac,
+0x6c,0x65,0x43,0xac,0x78,0x65,0x58,0xac,0x04,0x00,0x08,0xad,0x08,0x7b,0x87,0xae,
+0x04,0x00,0x4a,0xad,0x10,0x7b,0xa8,0xae,0x04,0x00,0x6b,0xad,0x18,0x7b,0xca,0xae,
+0x20,0x7b,0xeb,0xae,0x04,0x00,0xe7,0xac,0x02,0x80,0x02,0x3c,0x00,0x14,0x43,0x24,
+0x21,0x20,0xe0,0x00,0x03,0x00,0x06,0x24,0x21,0x10,0x80,0x00,0xff,0xff,0xc6,0x24,
+0x08,0x00,0x78,0xac,0x00,0x00,0x63,0xac,0x10,0x00,0x60,0xac,0x00,0x00,0x67,0xac,
+0x21,0x20,0x60,0x00,0x04,0x00,0x62,0xac,0x00,0x00,0x43,0xac,0x00,0x01,0x18,0x27,
+0xf5,0xff,0xc1,0x04,0x18,0x00,0x63,0x24,0x02,0x80,0x02,0x3c,0x10,0x7b,0x49,0x24,
+0x02,0x80,0x03,0x3c,0x02,0x80,0x02,0x3c,0x04,0x00,0x28,0x8d,0x60,0x14,0x4b,0x24,
+0x04,0x00,0xe4,0xac,0x00,0x14,0x6a,0x24,0x01,0x00,0x07,0x24,0x21,0x28,0x00,0x00,
+0x07,0x00,0x06,0x24,0x21,0x20,0xab,0x00,0x21,0x10,0xaa,0x00,0xff,0xff,0xc6,0x24,
+0x68,0x00,0x58,0xac,0x70,0x00,0x47,0xac,0x18,0x00,0xa5,0x24,0x00,0x00,0x89,0xac,
+0x04,0x00,0x88,0xac,0x00,0x00,0x04,0xad,0x00,0x01,0x18,0x27,0xf5,0xff,0xc1,0x04,
+0x21,0x40,0x80,0x00,0x02,0x80,0x02,0x3c,0x18,0x7b,0x4a,0x24,0x02,0x80,0x03,0x3c,
+0x02,0x80,0x02,0x3c,0x04,0x00,0x45,0x8d,0x20,0x15,0x4b,0x24,0x04,0x00,0x24,0xad,
+0x02,0x00,0x07,0x24,0x00,0x14,0x69,0x24,0x21,0x20,0x00,0x00,0x01,0x00,0x06,0x24,
+0x21,0x40,0x8b,0x00,0x21,0x10,0x89,0x00,0xff,0xff,0xc6,0x24,0x28,0x01,0x58,0xac,
+0x30,0x01,0x47,0xac,0x18,0x00,0x84,0x24,0x00,0x00,0x0a,0xad,0x04,0x00,0x05,0xad,
+0x00,0x00,0xa8,0xac,0x00,0x02,0x18,0x27,0xf5,0xff,0xc1,0x04,0x21,0x28,0x00,0x01,
+0x02,0x80,0x05,0x3c,0x20,0x7b,0xa5,0x24,0x04,0x00,0xa6,0x8c,0x1c,0x00,0xb7,0x8f,
+0x18,0x00,0xb6,0x8f,0x14,0x00,0xb5,0x8f,0x10,0x00,0xb4,0x8f,0x0c,0x00,0xb3,0x8f,
+0x08,0x00,0xb2,0x8f,0x04,0x00,0xb1,0x8f,0x00,0x00,0xb0,0x8f,0x02,0x80,0x07,0x3c,
+0x02,0x80,0x03,0x3c,0x50,0x15,0xe4,0x24,0x00,0x14,0x63,0x24,0x03,0x00,0x02,0x24,
+0x20,0x00,0xbd,0x27,0x58,0x01,0x78,0xac,0x04,0x00,0x48,0xad,0x04,0x00,0xa4,0xac,
+0x60,0x01,0x62,0xac,0x50,0x15,0xe5,0xac,0x04,0x00,0x86,0xac,0x08,0x00,0xe0,0x03,
+0x00,0x00,0xc4,0xac,0xd0,0xff,0xbd,0x27,0x02,0x80,0x02,0x3c,0x20,0x00,0xb2,0xaf,
+0x02,0x80,0x03,0x3c,0x4c,0x91,0x52,0x24,0x02,0x80,0x02,0x3c,0x28,0x00,0xb4,0xaf,
+0x24,0x00,0xb3,0xaf,0x1c,0x00,0xb1,0xaf,0x18,0x00,0xb0,0xaf,0x2c,0x00,0xbf,0xaf,
+0xd8,0x90,0x73,0x24,0x68,0x15,0x50,0x24,0x21,0x88,0x00,0x00,0x02,0x80,0x14,0x3c,
+0xee,0x4e,0x00,0x0c,0x21,0x20,0x20,0x02,0x78,0x51,0x05,0x8e,0x6c,0x00,0x66,0x8e,
+0xb8,0x90,0x82,0x26,0x6c,0x00,0x43,0x8e,0x1b,0x00,0x44,0x90,0xff,0xf1,0x02,0x24,
+0x21,0x18,0x66,0x00,0x24,0x28,0xa2,0x00,0x00,0x21,0x04,0x00,0x42,0x18,0x03,0x00,
+0x00,0x02,0xa5,0x34,0x44,0x51,0x03,0xae,0x68,0x51,0x04,0xae,0x78,0x51,0x05,0xae,
+0x6c,0x51,0x04,0xae,0x21,0x30,0x00,0x00,0x21,0x10,0x06,0x02,0x01,0x00,0xc6,0x24,
+0x1d,0x00,0xc3,0x28,0x99,0x51,0x40,0xa0,0x7c,0x51,0x40,0xa0,0xfa,0xff,0x60,0x14,
+0xb6,0x51,0x40,0xa0,0x01,0x00,0x31,0x26,0x20,0x00,0x22,0x2a,0xd4,0x51,0x00,0xae,
+0xe3,0xff,0x40,0x14,0x94,0x00,0x10,0x26,0x02,0x80,0x02,0x3c,0x02,0x80,0x03,0x3c,
+0x68,0x15,0x4b,0x24,0x02,0x80,0x02,0x3c,0x4c,0x91,0x6f,0x24,0xd8,0x90,0x4d,0x24,
+0x02,0x80,0x03,0x3c,0x02,0x80,0x02,0x3c,0xb8,0x90,0x6e,0x24,0x98,0x90,0x4c,0x24,
+0x21,0x88,0x00,0x00,0x80,0x18,0x11,0x00,0x21,0x20,0x6d,0x00,0x21,0x10,0x6f,0x00,
+0x21,0x28,0x2e,0x02,0x21,0x30,0x2c,0x02,0x00,0x00,0x88,0x8c,0x00,0x00,0xa9,0x90,
+0x00,0x00,0xc7,0x90,0x00,0x00,0x4a,0x8c,0x21,0x10,0x2b,0x02,0x01,0x00,0x31,0x26,
+0x21,0x18,0x6b,0x00,0x1d,0x00,0x24,0x2a,0xec,0x44,0x68,0xac,0xca,0x44,0x47,0xa0,
+0x60,0x45,0x6a,0xac,0xef,0xff,0x80,0x14,0x90,0x44,0x49,0xa0,0x02,0x80,0x02,0x3c,
+0x68,0x15,0x4a,0x24,0x02,0x80,0x03,0x3c,0x02,0x80,0x02,0x3c,0x74,0x8f,0x6b,0x24,
+0x14,0x8e,0x4c,0x24,0x21,0x88,0x00,0x00,0x21,0x48,0x00,0x00,0x21,0x30,0x00,0x00,
+0x21,0x40,0x2a,0x01,0x21,0x38,0x2b,0x01,0x21,0x10,0xe6,0x00,0x91,0x00,0x44,0x90,
+0x00,0x00,0x45,0x90,0x21,0x18,0x06,0x01,0x01,0x00,0xc6,0x24,0x05,0x00,0xc2,0x28,
+0xc5,0x43,0x64,0xa0,0xf8,0xff,0x40,0x14,0x34,0x43,0x65,0xa0,0x21,0x10,0x2c,0x02,
+0x1d,0x00,0x44,0x90,0x00,0x00,0x45,0x90,0x21,0x18,0x2a,0x02,0x01,0x00,0x31,0x26,
+0x1d,0x00,0x22,0x2a,0x73,0x44,0x64,0xa0,0x56,0x44,0x65,0xa0,0xeb,0xff,0x40,0x14,
+0x05,0x00,0x29,0x25,0x52,0x00,0x02,0x24,0x10,0x00,0xa2,0xa3,0x41,0x00,0x03,0x24,
+0x4d,0x00,0x02,0x24,0x02,0x80,0x07,0x3c,0x1c,0x97,0xe7,0x24,0x11,0x00,0xa3,0xa3,
+0x12,0x00,0xa2,0xa3,0xe8,0x03,0x03,0x24,0x01,0x00,0x02,0x24,0x00,0x80,0x06,0x3c,
+0x10,0x00,0xa5,0x27,0x21,0x20,0xe0,0x00,0xf0,0x37,0xc6,0x24,0x0c,0x00,0xe3,0xac,
+0x14,0x00,0xe2,0xa0,0xfb,0x0c,0x00,0x0c,0x13,0x00,0xa0,0xa3,0x2c,0x00,0xbf,0x8f,
+0x28,0x00,0xb4,0x8f,0x24,0x00,0xb3,0x8f,0x20,0x00,0xb2,0x8f,0x1c,0x00,0xb1,0x8f,
+0x18,0x00,0xb0,0x8f,0x08,0x00,0xe0,0x03,0x30,0x00,0xbd,0x27,0xe0,0xff,0xbd,0x27,
+0x02,0x80,0x02,0x3c,0x42,0x00,0x03,0x24,0x10,0x00,0xa3,0xa3,0x55,0x60,0x40,0xa0,
+0x4e,0x00,0x03,0x24,0x43,0x00,0x02,0x24,0x02,0x80,0x07,0x3c,0x54,0x97,0xe7,0x24,
+0x11,0x00,0xa2,0xa3,0x12,0x00,0xa3,0xa3,0xd0,0x07,0x02,0x24,0x01,0x00,0x03,0x24,
+0x00,0x80,0x06,0x3c,0x10,0x00,0xa5,0x27,0x21,0x20,0xe0,0x00,0xdc,0x44,0xc6,0x24,
+0x0c,0x00,0xe2,0xac,0x14,0x00,0xe3,0xa0,0x18,0x00,0xbf,0xaf,0xfb,0x0c,0x00,0x0c,
+0x13,0x00,0xa0,0xa3,0x18,0x00,0xbf,0x8f,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,
+0x20,0x00,0xbd,0x27,0x48,0xfd,0xbd,0x27,0xb4,0x02,0xb3,0xaf,0x02,0x80,0x02,0x3c,
+0x02,0x80,0x13,0x3c,0x24,0x92,0x46,0x24,0x68,0x15,0x63,0x26,0xb0,0x02,0xb2,0xaf,
+0xac,0x02,0xb1,0xaf,0xa8,0x02,0xb0,0xaf,0x03,0x40,0x60,0xa0,0x21,0x38,0xa0,0x03,
+0x90,0x00,0xc8,0x24,0x00,0x00,0xc2,0x8c,0x04,0x00,0xc3,0x8c,0x08,0x00,0xc4,0x8c,
+0x0c,0x00,0xc5,0x8c,0x10,0x00,0xc6,0x24,0x00,0x00,0xe2,0xac,0x04,0x00,0xe3,0xac,
+0x08,0x00,0xe4,0xac,0x0c,0x00,0xe5,0xac,0xf6,0xff,0xc8,0x14,0x10,0x00,0xe7,0x24,
+0x00,0x00,0xc3,0x8c,0x02,0x80,0x02,0x3c,0xb8,0x92,0x58,0x24,0x00,0x00,0xe3,0xac,
+0x98,0x00,0xb9,0x27,0x00,0x01,0x12,0x27,0x01,0x00,0x02,0x93,0x05,0x00,0x03,0x93,
+0x09,0x00,0x04,0x93,0x0d,0x00,0x05,0x93,0x00,0x00,0x11,0x93,0x02,0x00,0x0d,0x93,
+0x04,0x00,0x10,0x93,0x06,0x00,0x0c,0x93,0x08,0x00,0x0f,0x93,0x0a,0x00,0x07,0x93,
+0x0c,0x00,0x0e,0x93,0x0e,0x00,0x06,0x93,0x03,0x00,0x08,0x93,0x07,0x00,0x09,0x93,
+0x0b,0x00,0x0a,0x93,0x0f,0x00,0x0b,0x93,0x00,0x12,0x02,0x00,0x00,0x1a,0x03,0x00,
+0x00,0x22,0x04,0x00,0x00,0x2a,0x05,0x00,0x25,0x10,0x51,0x00,0x25,0x18,0x70,0x00,
+0x25,0x20,0x8f,0x00,0x25,0x28,0xae,0x00,0x00,0x6c,0x0d,0x00,0x00,0x64,0x0c,0x00,
+0x00,0x3c,0x07,0x00,0x00,0x34,0x06,0x00,0x25,0x68,0xa2,0x01,0x25,0x60,0x83,0x01,
+0x25,0x38,0xe4,0x00,0x25,0x30,0xc5,0x00,0x00,0x46,0x08,0x00,0x00,0x4e,0x09,0x00,
+0x00,0x56,0x0a,0x00,0x00,0x5e,0x0b,0x00,0x25,0x40,0x0d,0x01,0x25,0x48,0x2c,0x01,
+0x25,0x50,0x47,0x01,0x25,0x58,0x66,0x01,0x10,0x00,0x18,0x27,0x00,0x00,0x28,0xaf,
+0x04,0x00,0x29,0xaf,0x08,0x00,0x2a,0xaf,0x0c,0x00,0x2b,0xaf,0xd2,0xff,0x12,0x17,
+0x10,0x00,0x39,0x27,0x01,0x00,0x02,0x93,0x05,0x00,0x03,0x93,0x00,0x00,0x09,0x93,
+0x02,0x00,0x04,0x93,0x04,0x00,0x08,0x93,0x06,0x00,0x05,0x93,0x07,0x00,0x06,0x93,
+0x03,0x00,0x07,0x93,0x00,0x12,0x02,0x00,0x00,0x1a,0x03,0x00,0x25,0x10,0x49,0x00,
+0x25,0x18,0x68,0x00,0x00,0x24,0x04,0x00,0x00,0x2c,0x05,0x00,0x25,0x20,0x82,0x00,
+0x25,0x28,0xa3,0x00,0x00,0x3e,0x07,0x00,0x00,0x36,0x06,0x00,0x02,0x80,0x02,0x3c,
+0x25,0x38,0xe4,0x00,0x25,0x30,0xc5,0x00,0xc0,0x93,0x58,0x24,0x04,0x00,0x26,0xaf,
+0x00,0x00,0x27,0xaf,0x00,0x01,0x12,0x27,0xa0,0x01,0xb9,0x27,0x01,0x00,0x02,0x93,
+0x05,0x00,0x03,0x93,0x09,0x00,0x04,0x93,0x0d,0x00,0x05,0x93,0x00,0x00,0x11,0x93,
+0x02,0x00,0x0d,0x93,0x04,0x00,0x10,0x93,0x06,0x00,0x0c,0x93,0x08,0x00,0x0f,0x93,
+0x0a,0x00,0x07,0x93,0x0c,0x00,0x0e,0x93,0x0e,0x00,0x06,0x93,0x03,0x00,0x08,0x93,
+0x07,0x00,0x09,0x93,0x0b,0x00,0x0a,0x93,0x0f,0x00,0x0b,0x93,0x00,0x12,0x02,0x00,
+0x00,0x1a,0x03,0x00,0x00,0x22,0x04,0x00,0x00,0x2a,0x05,0x00,0x25,0x10,0x51,0x00,
+0x25,0x18,0x70,0x00,0x25,0x20,0x8f,0x00,0x25,0x28,0xae,0x00,0x00,0x6c,0x0d,0x00,
+0x00,0x64,0x0c,0x00,0x00,0x3c,0x07,0x00,0x00,0x34,0x06,0x00,0x25,0x68,0xa2,0x01,
+0x25,0x60,0x83,0x01,0x25,0x38,0xe4,0x00,0x25,0x30,0xc5,0x00,0x00,0x46,0x08,0x00,
+0x00,0x4e,0x09,0x00,0x00,0x56,0x0a,0x00,0x00,0x5e,0x0b,0x00,0x25,0x40,0x0d,0x01,
+0x25,0x48,0x2c,0x01,0x25,0x50,0x47,0x01,0x25,0x58,0x66,0x01,0x10,0x00,0x18,0x27,
+0x00,0x00,0x28,0xaf,0x04,0x00,0x29,0xaf,0x08,0x00,0x2a,0xaf,0x0c,0x00,0x2b,0xaf,
+0xd2,0xff,0x12,0x17,0x10,0x00,0x39,0x27,0x01,0x00,0x02,0x93,0x05,0x00,0x03,0x93,
+0x00,0x00,0x09,0x93,0x02,0x00,0x04,0x93,0x04,0x00,0x08,0x93,0x06,0x00,0x05,0x93,
+0x07,0x00,0x06,0x93,0x03,0x00,0x07,0x93,0x00,0x12,0x02,0x00,0x00,0x1a,0x03,0x00,
+0x25,0x10,0x49,0x00,0x25,0x18,0x68,0x00,0x00,0x24,0x04,0x00,0x00,0x2c,0x05,0x00,
+0x25,0x20,0x82,0x00,0x25,0x28,0xa3,0x00,0x00,0x3e,0x07,0x00,0x00,0x36,0x06,0x00,
+0x25,0x30,0xc5,0x00,0x25,0x38,0xe4,0x00,0x02,0x80,0x02,0x3c,0x04,0x00,0x26,0xaf,
+0x00,0x00,0x27,0xaf,0x68,0x15,0x46,0x24,0x21,0x50,0x00,0x00,0x80,0x20,0x0a,0x00,
+0x21,0x10,0x9d,0x00,0x00,0x00,0x45,0x8c,0x01,0x00,0x43,0x25,0xff,0x00,0x6a,0x30,
+0x21,0x20,0x86,0x00,0x25,0x00,0x42,0x2d,0xf8,0xff,0x40,0x14,0x18,0x40,0x85,0xac,
+0x02,0x80,0x02,0x3c,0x68,0x15,0x4b,0x24,0x21,0x50,0x00,0x00,0xc0,0x10,0x0a,0x00,
+0x21,0x48,0x5d,0x00,0x21,0x38,0x00,0x00,0x21,0x40,0x4b,0x00,0x21,0x10,0x27,0x01,
+0xa0,0x01,0x46,0x90,0x98,0x00,0x45,0x90,0x01,0x00,0xe4,0x24,0x21,0x18,0x07,0x01,
+0xff,0x00,0x87,0x30,0x08,0x00,0xe2,0x2c,0xb4,0x41,0x66,0xa0,0xf7,0xff,0x40,0x14,
+0xac,0x40,0x65,0xa0,0x01,0x00,0x42,0x25,0xff,0x00,0x4a,0x30,0x21,0x00,0x43,0x2d,
+0xef,0xff,0x60,0x14,0xc0,0x10,0x0a,0x00,0x25,0xb0,0x02,0x3c,0x0a,0x00,0x42,0x34,
+0x00,0x00,0x43,0x90,0x00,0x00,0x00,0x00,0x20,0x00,0x63,0x30,0x42,0x00,0x60,0x10,
+0x68,0x15,0x64,0x26,0x33,0x00,0x02,0x24,0xc1,0x42,0x62,0xa1,0x1c,0x00,0x03,0x24,
+0x0f,0x00,0x02,0x24,0xbc,0x42,0x63,0xa1,0xbd,0x42,0x62,0xa1,0x68,0x15,0x65,0x26,
+0x08,0x40,0xa4,0x8c,0xff,0x7f,0x08,0x3c,0xff,0xff,0x08,0x35,0xc0,0xff,0x02,0x24,
+0x24,0x20,0x88,0x00,0x24,0x20,0x82,0x00,0x0c,0x00,0x84,0x34,0xff,0xc0,0x02,0x24,
+0x24,0x20,0x82,0x00,0xc0,0xff,0x02,0x3c,0xff,0xff,0x42,0x34,0x00,0x18,0x84,0x34,
+0xbf,0xff,0x03,0x3c,0x24,0x20,0x82,0x00,0xff,0xff,0x63,0x34,0x7f,0xff,0x02,0x3c,
+0x24,0x20,0x83,0x00,0xff,0xff,0x42,0x34,0x24,0x20,0x82,0x00,0x0c,0x40,0xa6,0x8c,
+0x7f,0xff,0x03,0x24,0x40,0x40,0x84,0x34,0xff,0xff,0x02,0x3c,0x24,0x20,0x83,0x00,
+0xff,0x7f,0x42,0x34,0xff,0xbf,0x03,0x3c,0x10,0x40,0xa7,0x8c,0x24,0x20,0x82,0x00,
+0xff,0xff,0x63,0x34,0xff,0x9f,0x02,0x3c,0x24,0x30,0xc3,0x00,0xff,0xff,0x42,0x34,
+0xff,0x3f,0x03,0x3c,0x24,0x20,0x82,0x00,0xff,0xff,0x63,0x34,0x12,0x00,0x02,0x24,
+0xb4,0x02,0xb3,0x8f,0xb0,0x02,0xb2,0x8f,0xac,0x02,0xb1,0x8f,0xa8,0x02,0xb0,0x8f,
+0x24,0x38,0xe3,0x00,0xc7,0x42,0xa2,0xa0,0x1f,0x00,0x03,0x24,0x01,0x00,0x02,0x24,
+0x24,0x30,0xc8,0x00,0xbe,0x42,0xa3,0xa0,0xc0,0x42,0xa2,0xa0,0xff,0x00,0x03,0x24,
+0xff,0xff,0x02,0x24,0xb8,0x02,0xbd,0x27,0x08,0x40,0xa4,0xac,0x10,0x40,0xa7,0xac,
+0x0c,0x40,0xa6,0xac,0xc2,0x42,0xa2,0xa0,0xc4,0x42,0xa3,0xa4,0xbf,0x42,0xa0,0xa0,
+0x08,0x00,0xe0,0x03,0xc6,0x42,0xa0,0xa0,0x33,0x00,0x02,0x24,0xc1,0x42,0x82,0xa0,
+0x0d,0x00,0x03,0x24,0x03,0x00,0x02,0x24,0xbc,0x42,0x83,0xa0,0x65,0x5d,0x00,0x08,
+0xbd,0x42,0x82,0xa0,0xe0,0xff,0xbd,0x27,0x02,0x80,0x07,0x3c,0x68,0x15,0xe7,0x24,
+0x18,0x00,0xbf,0xaf,0x00,0x40,0xe3,0x8c,0xf0,0xff,0x02,0x24,0x02,0x80,0x08,0x3c,
+0x24,0x18,0x62,0x00,0xff,0xf0,0x02,0x24,0x24,0x18,0x62,0x00,0x00,0x40,0xe3,0xac,
+0x1c,0x00,0x03,0x24,0x36,0x00,0x02,0x24,0xcf,0x42,0xe3,0xa0,0x20,0x00,0x03,0x24,
+0xce,0x42,0xe2,0xa0,0xd1,0x42,0xe3,0xa0,0x32,0x00,0x02,0x24,0x20,0x00,0x03,0x24,
+0xd0,0x42,0xe2,0xa0,0xc8,0x42,0xe3,0xa4,0x0a,0x00,0x02,0x24,0x00,0x02,0x03,0x24,
+0xd2,0x42,0xe2,0xa0,0xcc,0x42,0xe3,0xa4,0x00,0x01,0x02,0x24,0x49,0x00,0x03,0x24,
+0x38,0x97,0x08,0x25,0xff,0xff,0x0a,0x34,0x01,0x00,0x09,0x24,0x11,0x00,0xa3,0xa3,
+0xca,0x42,0xe2,0xa4,0xd0,0x07,0x03,0x24,0x44,0x00,0x02,0x24,0x00,0x80,0x06,0x3c,
+0x10,0x00,0xa2,0xa3,0x10,0x00,0xa5,0x27,0x47,0x00,0x02,0x24,0x21,0x20,0x00,0x01,
+0x54,0x45,0xc6,0x24,0x04,0x40,0xea,0xac,0x02,0x40,0xe9,0xa0,0x0c,0x00,0x03,0xad,
+0x14,0x00,0x09,0xa1,0xe6,0x42,0xe0,0xa0,0xdc,0x63,0xea,0xac,0xd7,0x42,0xe0,0xa0,
+0x12,0x00,0xa2,0xa3,0xfb,0x0c,0x00,0x0c,0x13,0x00,0xa0,0xa3,0x18,0x00,0xbf,0x8f,
+0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,0x20,0x00,0xbd,0x27,0xe0,0xff,0xbd,0x27,
+0x02,0x80,0x02,0x3c,0x50,0x00,0x03,0x24,0x10,0x00,0xa3,0xa3,0x2a,0x62,0x40,0xa0,
+0x41,0x00,0x03,0x24,0x52,0x00,0x02,0x24,0x02,0x80,0x07,0x3c,0xc4,0x97,0xe7,0x24,
+0x11,0x00,0xa2,0xa3,0x12,0x00,0xa3,0xa3,0xd0,0x07,0x02,0x24,0x01,0x00,0x03,0x24,
+0x01,0x80,0x06,0x3c,0x10,0x00,0xa5,0x27,0x21,0x20,0xe0,0x00,0x88,0x5b,0xc6,0x24,
+0x0c,0x00,0xe2,0xac,0x14,0x00,0xe3,0xa0,0x18,0x00,0xbf,0xaf,0xfb,0x0c,0x00,0x0c,
+0x13,0x00,0xa0,0xa3,0x18,0x00,0xbf,0x8f,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,
+0x20,0x00,0xbd,0x27,0xd8,0xff,0xbd,0x27,0x18,0x00,0xb0,0xaf,0x02,0x80,0x10,0x3c,
+0x68,0x15,0x10,0x26,0x20,0x00,0xbf,0xaf,0x1c,0x00,0xb1,0xaf,0x00,0x40,0x09,0x8e,
+0xff,0xff,0x02,0x24,0xff,0x00,0x4b,0x30,0x0f,0xff,0x02,0x24,0x24,0x48,0x22,0x01,
+0xff,0xff,0x02,0x3c,0xff,0x0f,0x42,0x34,0x24,0x48,0x22,0x01,0x01,0x00,0x07,0x3c,
+0x47,0x00,0x02,0x24,0x3b,0x00,0x03,0x24,0x02,0x80,0x08,0x3c,0x10,0x00,0xa2,0xa3,
+0x11,0x00,0xa3,0xa3,0xe0,0x97,0x08,0x25,0x56,0x30,0xea,0x34,0xd0,0x07,0x02,0x24,
+0x01,0x00,0x03,0x24,0xf4,0x98,0xe7,0x34,0x00,0x80,0x06,0x3c,0x04,0x43,0x0b,0xae,
+0x00,0x40,0x09,0xae,0x43,0x00,0x11,0x24,0x10,0x00,0xa5,0x27,0x0c,0x43,0x07,0xae,
+0x10,0x43,0x0a,0xae,0x0c,0x00,0x02,0xad,0x14,0x00,0x03,0xa1,0x08,0x43,0x00,0xae,
+0x14,0x43,0x00,0xae,0x18,0x43,0x00,0xae,0x21,0x20,0x00,0x01,0xe4,0x4e,0xc6,0x24,
+0x12,0x00,0xb1,0xa3,0xfb,0x0c,0x00,0x0c,0x13,0x00,0xa0,0xa3,0x1e,0x00,0x02,0x24,
+0x21,0x43,0x02,0xa2,0x4a,0x00,0x03,0x24,0x45,0x00,0x02,0x24,0x1c,0x43,0x03,0xa2,
+0x1d,0x43,0x02,0xa2,0x23,0x00,0x03,0x24,0x3e,0x00,0x02,0x24,0x1e,0x43,0x11,0xa2,
+0x1f,0x43,0x02,0xa2,0x20,0x43,0x03,0xa2,0x20,0x00,0xbf,0x8f,0x1c,0x00,0xb1,0x8f,
+0x18,0x00,0xb0,0x8f,0x08,0x00,0xe0,0x03,0x28,0x00,0xbd,0x27,0xe0,0xff,0xbd,0x27,
+0x3b,0x00,0x02,0x24,0x43,0x00,0x03,0x24,0x10,0x00,0xa2,0xa3,0x11,0x00,0xa3,0xa3,
+0x36,0x00,0x02,0x24,0x02,0x80,0x03,0x3c,0x02,0x80,0x07,0x3c,0xfc,0x97,0xe7,0x24,
+0x12,0x00,0xa2,0xa3,0x3b,0x58,0x60,0xa0,0xd0,0x07,0x02,0x24,0x01,0x00,0x03,0x24,
+0x00,0x80,0x06,0x3c,0x10,0x00,0xa5,0x27,0x21,0x20,0xe0,0x00,0x20,0x53,0xc6,0x24,
+0x0c,0x00,0xe2,0xac,0x14,0x00,0xe3,0xa0,0x18,0x00,0xbf,0xaf,0xfb,0x0c,0x00,0x0c,
+0x13,0x00,0xa0,0xa3,0x18,0x00,0xbf,0x8f,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,
+0x20,0x00,0xbd,0x27,0xff,0xff,0x07,0x24,0x02,0x80,0x02,0x3c,0xe0,0xff,0xbd,0x27,
+0x3d,0x58,0x47,0xa0,0x3b,0x00,0x03,0x24,0x43,0x00,0x02,0x24,0x10,0x00,0xa3,0xa3,
+0x11,0x00,0xa2,0xa3,0x36,0x00,0x03,0x24,0x16,0x00,0x02,0x24,0x02,0x80,0x08,0x3c,
+0x18,0x98,0x08,0x25,0x12,0x00,0xa3,0xa3,0x13,0x00,0xa2,0xa3,0xd0,0x07,0x03,0x24,
+0x01,0x00,0x02,0x24,0x00,0x80,0x06,0x3c,0x10,0x00,0xa5,0x27,0x21,0x20,0x00,0x01,
+0x0c,0x00,0x03,0xad,0x14,0x00,0x02,0xa1,0x18,0x00,0xbf,0xaf,0xfb,0x0c,0x00,0x0c,
+0xb8,0x54,0xc6,0x24,0x18,0x00,0xbf,0x8f,0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,
+0x20,0x00,0xbd,0x27,0xe0,0xff,0xbd,0x27,0x02,0x80,0x02,0x3c,0x52,0x00,0x03,0x24,
+0x10,0x00,0xa3,0xa3,0x4c,0x79,0x40,0xa4,0x54,0x00,0x03,0x24,0x53,0x00,0x02,0x24,
+0x02,0x80,0x07,0x3c,0x34,0x98,0xe7,0x24,0x11,0x00,0xa2,0xa3,0x12,0x00,0xa3,0xa3,
+0xf4,0x01,0x02,0x24,0x01,0x00,0x03,0x24,0x01,0x80,0x06,0x3c,0x10,0x00,0xa5,0x27,
+0x21,0x20,0xe0,0x00,0xc8,0x5c,0xc6,0x24,0x0c,0x00,0xe2,0xac,0x14,0x00,0xe3,0xa0,
+0x18,0x00,0xbf,0xaf,0xfb,0x0c,0x00,0x0c,0x13,0x00,0xa0,0xa3,0x18,0x00,0xbf,0x8f,
+0x00,0x00,0x00,0x00,0x08,0x00,0xe0,0x03,0x20,0x00,0xbd,0x27,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x78,0x0c,0x00,0x00,0x01,0x00,0x00,0x5e,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x01,0x5e,0x78,0x0c,0x00,0x00,0x01,0x00,0x02,0x5e,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x03,0x5e,0x78,0x0c,0x00,0x00,0x01,0x00,0x04,0x5d,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x05,0x5b,0x78,0x0c,0x00,0x00,0x01,0x00,0x06,0x59,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x07,0x57,0x78,0x0c,0x00,0x00,0x01,0x00,0x08,0x55,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x09,0x53,0x78,0x0c,0x00,0x00,0x01,0x00,0x0a,0x51,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x0b,0x4f,0x78,0x0c,0x00,0x00,0x01,0x00,0x0c,0x4d,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x0d,0x4b,0x78,0x0c,0x00,0x00,0x01,0x00,0x0e,0x49,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x0f,0x47,0x78,0x0c,0x00,0x00,0x01,0x00,0x10,0x45,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x11,0x43,0x78,0x0c,0x00,0x00,0x01,0x00,0x12,0x41,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x13,0x3f,0x78,0x0c,0x00,0x00,0x01,0x00,0x14,0x3d,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x15,0x3b,0x78,0x0c,0x00,0x00,0x01,0x00,0x16,0x39,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x17,0x37,0x78,0x0c,0x00,0x00,0x01,0x00,0x18,0x35,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x19,0x33,0x78,0x0c,0x00,0x00,0x01,0x00,0x1a,0x31,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x1b,0x2f,0x78,0x0c,0x00,0x00,0x01,0x00,0x1c,0x2d,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x1d,0x2b,0x78,0x0c,0x00,0x00,0x01,0x00,0x1e,0x29,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x1f,0x27,0x78,0x0c,0x00,0x00,0x01,0x00,0x20,0x25,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x21,0x23,0x78,0x0c,0x00,0x00,0x01,0x00,0x22,0x21,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x23,0x1f,0x78,0x0c,0x00,0x00,0x01,0x00,0x24,0x1d,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x25,0x1b,0x78,0x0c,0x00,0x00,0x01,0x00,0x26,0x19,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x27,0x17,0x78,0x0c,0x00,0x00,0x01,0x00,0x28,0x15,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x29,0x13,0x78,0x0c,0x00,0x00,0x01,0x00,0x2a,0x11,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x2b,0x0f,0x78,0x0c,0x00,0x00,0x01,0x00,0x2c,0x0d,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x2d,0x0b,0x78,0x0c,0x00,0x00,0x01,0x00,0x2e,0x09,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x2f,0x07,0x78,0x0c,0x00,0x00,0x01,0x00,0x30,0x05,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x31,0x03,0x78,0x0c,0x00,0x00,0x01,0x00,0x32,0x01,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x33,0x01,0x78,0x0c,0x00,0x00,0x01,0x00,0x34,0x01,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x35,0x01,0x78,0x0c,0x00,0x00,0x01,0x00,0x36,0x01,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x37,0x01,0x78,0x0c,0x00,0x00,0x01,0x00,0x38,0x01,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x39,0x01,0x78,0x0c,0x00,0x00,0x01,0x00,0x3a,0x01,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x3b,0x01,0x78,0x0c,0x00,0x00,0x01,0x00,0x3c,0x01,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x3d,0x01,0x78,0x0c,0x00,0x00,0x01,0x00,0x3e,0x01,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x3f,0x01,0x78,0x0c,0x00,0x00,0x01,0x00,0x40,0x5e,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x41,0x5e,0x78,0x0c,0x00,0x00,0x01,0x00,0x42,0x5e,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x43,0x5e,0x78,0x0c,0x00,0x00,0x01,0x00,0x44,0x5d,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x45,0x5b,0x78,0x0c,0x00,0x00,0x01,0x00,0x46,0x59,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x47,0x57,0x78,0x0c,0x00,0x00,0x01,0x00,0x48,0x55,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x49,0x53,0x78,0x0c,0x00,0x00,0x01,0x00,0x4a,0x51,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x4b,0x4f,0x78,0x0c,0x00,0x00,0x01,0x00,0x4c,0x4d,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x4d,0x4b,0x78,0x0c,0x00,0x00,0x01,0x00,0x4e,0x49,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x4f,0x47,0x78,0x0c,0x00,0x00,0x01,0x00,0x50,0x45,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x51,0x43,0x78,0x0c,0x00,0x00,0x01,0x00,0x52,0x41,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x53,0x3f,0x78,0x0c,0x00,0x00,0x01,0x00,0x54,0x3d,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x55,0x3b,0x78,0x0c,0x00,0x00,0x01,0x00,0x56,0x39,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x57,0x37,0x78,0x0c,0x00,0x00,0x01,0x00,0x58,0x35,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x59,0x33,0x78,0x0c,0x00,0x00,0x01,0x00,0x5a,0x31,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x5b,0x2f,0x78,0x0c,0x00,0x00,0x01,0x00,0x5c,0x2d,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x5d,0x2b,0x78,0x0c,0x00,0x00,0x01,0x00,0x5e,0x29,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x5f,0x27,0x78,0x0c,0x00,0x00,0x01,0x00,0x60,0x25,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x61,0x23,0x78,0x0c,0x00,0x00,0x01,0x00,0x62,0x21,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x63,0x1f,0x78,0x0c,0x00,0x00,0x01,0x00,0x64,0x1d,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x65,0x1b,0x78,0x0c,0x00,0x00,0x01,0x00,0x66,0x19,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x67,0x17,0x78,0x0c,0x00,0x00,0x01,0x00,0x68,0x15,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x69,0x13,0x78,0x0c,0x00,0x00,0x01,0x00,0x6a,0x11,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x6b,0x0f,0x78,0x0c,0x00,0x00,0x01,0x00,0x6c,0x0d,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x6d,0x0b,0x78,0x0c,0x00,0x00,0x01,0x00,0x6e,0x09,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x6f,0x07,0x78,0x0c,0x00,0x00,0x01,0x00,0x70,0x05,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x71,0x03,0x78,0x0c,0x00,0x00,0x01,0x00,0x72,0x01,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x73,0x01,0x78,0x0c,0x00,0x00,0x01,0x00,0x74,0x01,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x75,0x01,0x78,0x0c,0x00,0x00,0x01,0x00,0x76,0x01,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x77,0x01,0x78,0x0c,0x00,0x00,0x01,0x00,0x78,0x01,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x79,0x01,0x78,0x0c,0x00,0x00,0x01,0x00,0x7a,0x01,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x7b,0x01,0x78,0x0c,0x00,0x00,0x01,0x00,0x7c,0x01,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x7d,0x01,0x78,0x0c,0x00,0x00,0x01,0x00,0x7e,0x01,0x78,0x0c,0x00,0x00,
+0x01,0x00,0x7f,0x01,0x78,0x0c,0x00,0x00,0x1e,0x00,0x00,0x30,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x01,0x30,0x78,0x0c,0x00,0x00,0x1e,0x00,0x02,0x30,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x03,0x30,0x78,0x0c,0x00,0x00,0x1e,0x00,0x04,0x30,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x05,0x30,0x78,0x0c,0x00,0x00,0x1e,0x00,0x06,0x30,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x07,0x30,0x78,0x0c,0x00,0x00,0x1e,0x00,0x08,0x3e,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x09,0x40,0x78,0x0c,0x00,0x00,0x1e,0x00,0x0a,0x42,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x0b,0x44,0x78,0x0c,0x00,0x00,0x1e,0x00,0x0c,0x46,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x0d,0x48,0x78,0x0c,0x00,0x00,0x1e,0x00,0x0e,0x48,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x0f,0x4a,0x78,0x0c,0x00,0x00,0x1e,0x00,0x10,0x4a,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x11,0x4c,0x78,0x0c,0x00,0x00,0x1e,0x00,0x12,0x4c,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x13,0x4e,0x78,0x0c,0x00,0x00,0x1e,0x00,0x14,0x50,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x15,0x50,0x78,0x0c,0x00,0x00,0x1e,0x00,0x16,0x50,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x17,0x52,0x78,0x0c,0x00,0x00,0x1e,0x00,0x18,0x52,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x19,0x52,0x78,0x0c,0x00,0x00,0x1e,0x00,0x1a,0x54,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x1b,0x54,0x78,0x0c,0x00,0x00,0x1e,0x00,0x1c,0x54,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x1d,0x56,0x78,0x0c,0x00,0x00,0x1e,0x00,0x1e,0x56,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x1f,0x56,0x78,0x0c,0x00,0x00,0x1e,0x00,0x20,0x56,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x21,0x58,0x78,0x0c,0x00,0x00,0x1e,0x00,0x22,0x58,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x23,0x58,0x78,0x0c,0x00,0x00,0x1e,0x00,0x24,0x58,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x25,0x5a,0x78,0x0c,0x00,0x00,0x1e,0x00,0x26,0x5a,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x27,0x5a,0x78,0x0c,0x00,0x00,0x1e,0x00,0x28,0x5c,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x29,0x5c,0x78,0x0c,0x00,0x00,0x1e,0x00,0x2a,0x5e,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x2b,0x5e,0x78,0x0c,0x00,0x00,0x1e,0x00,0x2c,0x5e,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x2d,0x5e,0x78,0x0c,0x00,0x00,0x1e,0x00,0x2e,0x5e,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x2f,0x5e,0x78,0x0c,0x00,0x00,0x1e,0x00,0x30,0x5e,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x31,0x5e,0x78,0x0c,0x00,0x00,0x1e,0x00,0x32,0x5e,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x33,0x5e,0x78,0x0c,0x00,0x00,0x1e,0x00,0x34,0x5e,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x35,0x5e,0x78,0x0c,0x00,0x00,0x1e,0x00,0x36,0x5e,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x37,0x5e,0x78,0x0c,0x00,0x00,0x1e,0x00,0x38,0x5e,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x39,0x5e,0x78,0x0c,0x00,0x00,0x1e,0x00,0x3a,0x5e,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x3b,0x5e,0x78,0x0c,0x00,0x00,0x1e,0x00,0x3c,0x5e,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x3d,0x5e,0x78,0x0c,0x00,0x00,0x1e,0x00,0x3e,0x5e,0x78,0x0c,0x00,0x00,
+0x1e,0x00,0x3f,0x5e,0xff,0x00,0x00,0x00,0xff,0xff,0xff,0xff,0x00,0x08,0x00,0x00,
+0x00,0x00,0x04,0x03,0x04,0x08,0x00,0x00,0x03,0x00,0x00,0x00,0x08,0x08,0x00,0x00,
+0x00,0xfc,0x00,0x00,0x0c,0x08,0x00,0x00,0x0a,0x00,0x00,0x04,0x10,0x08,0x00,0x00,
+0xff,0x10,0x10,0x80,0x14,0x08,0x00,0x00,0x10,0x3d,0x0c,0x02,0x18,0x08,0x00,0x00,
+0xc5,0x03,0x00,0x00,0x1c,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x08,0x00,0x00,
+0x04,0x00,0x00,0x00,0x24,0x08,0x00,0x00,0x00,0x02,0x69,0x00,0x28,0x08,0x00,0x00,
+0x04,0x00,0x00,0x00,0x2c,0x08,0x00,0x00,0x00,0x02,0x69,0x00,0x30,0x08,0x00,0x00,
+0x04,0x00,0x00,0x00,0x34,0x08,0x00,0x00,0x00,0x02,0x69,0x00,0x38,0x08,0x00,0x00,
+0x04,0x00,0x00,0x00,0x3c,0x08,0x00,0x00,0x00,0x02,0x69,0x00,0x40,0x08,0x00,0x00,
+0x00,0x00,0x00,0x00,0x44,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x48,0x08,0x00,0x00,
+0x00,0x00,0x00,0x00,0x4c,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x50,0x08,0x00,0x00,
+0x00,0x00,0x00,0x00,0x54,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x58,0x08,0x00,0x00,
+0x65,0xa9,0x65,0xa9,0x5c,0x08,0x00,0x00,0x65,0xa9,0x65,0xa9,0x60,0x08,0x00,0x00,
+0x30,0x01,0x7f,0x0f,0x64,0x08,0x00,0x00,0x30,0x01,0x7f,0x0f,0x68,0x08,0x00,0x00,
+0x30,0x01,0x7f,0x0f,0x6c,0x08,0x00,0x00,0x30,0x01,0x7f,0x0f,0x70,0x08,0x00,0x00,
+0x00,0x03,0x00,0x03,0x74,0x08,0x00,0x00,0x00,0x03,0x00,0x03,0x78,0x08,0x00,0x00,
+0x00,0x00,0x00,0x00,0x7c,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x90,0x08,0x00,0x00,
+0x00,0x00,0x00,0x00,0x94,0x08,0x00,0x00,0xfe,0xff,0xff,0xff,0x98,0x08,0x00,0x00,
+0x10,0x20,0x30,0x40,0x9c,0x08,0x00,0x00,0x50,0x60,0x70,0x00,0xb0,0x08,0x00,0x00,
+0x00,0x00,0x00,0x00,0xe0,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0xe4,0x08,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x0e,0x00,0x00,0x03,0x03,0x03,0x03,0x04,0x0e,0x00,0x00,
+0x03,0x03,0x03,0x03,0x08,0x0e,0x00,0x00,0x03,0x03,0x00,0x00,0x0c,0x0e,0x00,0x00,
+0x00,0x00,0x00,0x00,0x10,0x0e,0x00,0x00,0x03,0x03,0x03,0x03,0x14,0x0e,0x00,0x00,
+0x03,0x03,0x03,0x03,0x18,0x0e,0x00,0x00,0x03,0x03,0x03,0x03,0x1c,0x0e,0x00,0x00,
+0x03,0x03,0x03,0x03,0x00,0x09,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x09,0x00,0x00,
+0x23,0x00,0x00,0x00,0x08,0x09,0x00,0x00,0x00,0x00,0x00,0x00,0x0c,0x09,0x00,0x00,
+0x33,0x13,0x32,0x03,0x08,0x0a,0x00,0x00,0x00,0x86,0x88,0x8f,0x2c,0x0a,0x00,0x00,
+0x00,0x00,0x92,0x00,0x00,0x0c,0x00,0x00,0x80,0x00,0x00,0x00,0x04,0x0c,0x00,0x00,
+0x33,0x54,0x00,0x00,0x08,0x0c,0x00,0x00,0xe4,0x00,0x00,0x00,0x0c,0x0c,0x00,0x00,
+0x6c,0x6c,0x6c,0x6c,0x10,0x0c,0x00,0x00,0x00,0x00,0x00,0x08,0x14,0x0c,0x00,0x00,
+0x00,0x01,0x00,0x40,0x18,0x0c,0x00,0x00,0x00,0x00,0x00,0x08,0x1c,0x0c,0x00,0x00,
+0x00,0x01,0x00,0x40,0x20,0x0c,0x00,0x00,0x00,0x00,0x00,0x08,0x24,0x0c,0x00,0x00,
+0x00,0x01,0x00,0x40,0x28,0x0c,0x00,0x00,0x00,0x00,0x00,0x08,0x2c,0x0c,0x00,0x00,
+0x00,0x01,0x00,0x40,0x30,0x0c,0x00,0x00,0x44,0x6a,0xe9,0x8d,0x34,0x0c,0x00,0x00,
+0xcd,0x52,0x96,0x46,0x38,0x0c,0x00,0x00,0x90,0x5a,0x01,0x48,0x3c,0x0c,0x00,0x00,
+0x64,0x97,0x97,0x1a,0x40,0x0c,0x00,0x00,0x3f,0x42,0x7c,0x1f,0x44,0x0c,0x00,0x00,
+0xb7,0x00,0x01,0x00,0x48,0x0c,0x00,0x00,0x00,0x00,0x02,0xec,0x4c,0x0c,0x00,0x00,
+0x03,0x03,0xfc,0x00,0x50,0x0c,0x00,0x00,0x1c,0x34,0x54,0x69,0x54,0x0c,0x00,0x00,
+0x94,0x00,0x3c,0x43,0x58,0x0c,0x00,0x00,0x1c,0x34,0x54,0x69,0x5c,0x0c,0x00,0x00,
+0x94,0x00,0x3c,0x43,0x60,0x0c,0x00,0x00,0x1c,0x34,0x54,0x69,0x64,0x0c,0x00,0x00,
+0x94,0x00,0x3c,0x43,0x68,0x0c,0x00,0x00,0x1c,0x34,0x54,0x69,0x6c,0x0c,0x00,0x00,
+0x94,0x00,0x3c,0x43,0x70,0x0c,0x00,0x00,0x0d,0x00,0x5a,0x2c,0x74,0x0c,0x00,0x00,
+0x1b,0x15,0x86,0x01,0x78,0x0c,0x00,0x00,0x1f,0x00,0x00,0x00,0x7c,0x0c,0x00,0x00,
+0x12,0x16,0xb9,0x00,0x80,0x0c,0x00,0x00,0x80,0x00,0x00,0x20,0x84,0x0c,0x00,0x00,
+0x00,0x00,0x00,0x00,0x88,0x0c,0x00,0x00,0x80,0x00,0x00,0x20,0x8c,0x0c,0x00,0x00,
+0x00,0x00,0x20,0x08,0x90,0x0c,0x00,0x00,0x00,0x01,0x00,0x40,0x94,0x0c,0x00,0x00,
+0x00,0x00,0x00,0x00,0x98,0x0c,0x00,0x00,0x00,0x01,0x00,0x40,0x9c,0x0c,0x00,0x00,
+0x00,0x00,0x00,0x00,0xa0,0x0c,0x00,0x00,0x92,0x24,0x49,0x00,0xa4,0x0c,0x00,0x00,
+0x00,0x00,0x00,0x00,0xa8,0x0c,0x00,0x00,0x00,0x00,0x00,0x00,0xac,0x0c,0x00,0x00,
+0x00,0x00,0x00,0x00,0xb0,0x0c,0x00,0x00,0x00,0x00,0x00,0x00,0xb4,0x0c,0x00,0x00,
+0x00,0x00,0x00,0x00,0xb8,0x0c,0x00,0x00,0x00,0x00,0x00,0x00,0xbc,0x0c,0x00,0x00,
+0x92,0x24,0x49,0x00,0xc0,0x0c,0x00,0x00,0x00,0x00,0x00,0x00,0xc4,0x0c,0x00,0x00,
+0x00,0x00,0x00,0x00,0xc8,0x0c,0x00,0x00,0x00,0x00,0x00,0x00,0xcc,0x0c,0x00,0x00,
+0x00,0x00,0x00,0x00,0xd0,0x0c,0x00,0x00,0x00,0x00,0x00,0x00,0xd4,0x0c,0x00,0x00,
+0x00,0x00,0x00,0x00,0xd8,0x0c,0x00,0x00,0x27,0x24,0xb2,0x64,0xdc,0x0c,0x00,0x00,
+0x32,0x69,0x76,0x00,0xe0,0x0c,0x00,0x00,0x22,0x22,0x22,0x00,0xe4,0x0c,0x00,0x00,
+0x00,0x00,0x00,0x00,0xe8,0x0c,0x00,0x00,0x02,0x43,0x64,0x07,0x00,0x0d,0x00,0x00,
+0x80,0x07,0x00,0x00,0x04,0x0d,0x00,0x00,0x03,0x04,0x00,0x00,0x08,0x0d,0x00,0x00,
+0x7f,0x90,0x00,0x00,0x0c,0x0d,0x00,0x00,0x01,0x00,0x00,0x00,0x10,0x0d,0x00,0x00,
+0x99,0x99,0x69,0xa0,0x14,0x0d,0x00,0x00,0x67,0x3c,0x99,0x99,0x18,0x0d,0x00,0x00,
+0x6b,0x5b,0x8f,0x6a,0x1c,0x0d,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x0d,0x00,0x00,
+0x00,0x00,0x00,0x00,0x24,0x0d,0x00,0x00,0x00,0x00,0x00,0x00,0x28,0x0d,0x00,0x00,
+0x00,0x00,0x00,0x00,0x2c,0x0d,0x00,0x00,0x75,0x19,0x97,0xcc,0x30,0x0d,0x00,0x00,
+0x00,0x00,0x00,0x00,0x34,0x0d,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x0d,0x00,0x00,
+0x00,0x00,0x00,0x00,0x3c,0x0d,0x00,0x00,0x93,0x72,0x02,0x00,0x40,0x0d,0x00,0x00,
+0x00,0x00,0x00,0x00,0x44,0x0d,0x00,0x00,0x00,0x00,0x00,0x00,0x48,0x0d,0x00,0x00,
+0x00,0x00,0x00,0x00,0x50,0x0d,0x00,0x00,0x0a,0x14,0x37,0x64,0x54,0x0d,0x00,0x00,
+0x02,0xbd,0x4d,0x02,0x58,0x0d,0x00,0x00,0x00,0x00,0x00,0x00,0x5c,0x0d,0x00,0x00,
+0x64,0x20,0x03,0x30,0x60,0x0d,0x00,0x00,0x68,0xde,0x53,0x46,0x64,0x0d,0x00,0x00,
+0x3c,0x8a,0x51,0x00,0x68,0x0d,0x00,0x00,0x06,0x01,0x00,0x00,0xff,0x00,0x00,0x00,
+0xff,0xff,0xff,0xff,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x00,
+0x44,0x05,0x01,0x80,0x10,0x00,0x00,0x00,0x74,0x05,0x01,0x80,0x10,0x00,0x00,0x00,
+0xe0,0x2e,0x00,0x80,0x10,0x00,0x00,0x00,0xec,0x2e,0x00,0x80,0x10,0x00,0x00,0x00,
+0xa0,0x08,0x01,0x80,0x08,0x00,0x00,0x00,0x38,0x06,0x01,0x80,0x00,0xb7,0x00,0x00,
+0x01,0xe0,0x0e,0x00,0x02,0x4d,0x04,0x00,0x03,0x41,0x04,0x00,0x04,0xc3,0x08,0x00,
+0x05,0x72,0x0c,0x00,0x06,0xe6,0x00,0x00,0x07,0x2a,0x08,0x00,0x08,0x3f,0x00,0x00,
+0x09,0x35,0x03,0x00,0x0a,0xd4,0x09,0x00,0x0b,0xbb,0x07,0x00,0x0c,0x50,0x08,0x00,
+0x0d,0xdf,0x0c,0x00,0x0e,0x2b,0x00,0x00,0x0f,0x14,0x01,0x00,0x00,0xb7,0x01,0x00,
+0x01,0x01,0x00,0x00,0x02,0x00,0x04,0x00,0x01,0x02,0x00,0x00,0x02,0x01,0x04,0x00,
+0x01,0x03,0x00,0x00,0x02,0x02,0x04,0x00,0x01,0x04,0x00,0x00,0x02,0x03,0x04,0x00,
+0x01,0x05,0x00,0x00,0x02,0x04,0x04,0x00,0x01,0x06,0x00,0x00,0x02,0x05,0x04,0x00,
+0x01,0x07,0x00,0x00,0x02,0x08,0x04,0x00,0x01,0x08,0x00,0x00,0x02,0x09,0x04,0x00,
+0x01,0x09,0x00,0x00,0x02,0x0a,0x04,0x00,0x01,0x0a,0x00,0x00,0x02,0x0b,0x04,0x00,
+0x01,0x0b,0x00,0x00,0x02,0x02,0x05,0x00,0x01,0x0c,0x00,0x00,0x02,0x03,0x05,0x00,
+0x01,0x0d,0x00,0x00,0x02,0x04,0x05,0x00,0x01,0x0e,0x00,0x00,0x02,0x05,0x05,0x00,
+0x01,0x0f,0x00,0x00,0x02,0x40,0x05,0x00,0x01,0x10,0x00,0x00,0x02,0x41,0x05,0x00,
+0x01,0x11,0x00,0x00,0x02,0x42,0x05,0x00,0x01,0x12,0x00,0x00,0x02,0x43,0x05,0x00,
+0x01,0x13,0x00,0x00,0x02,0x44,0x05,0x00,0x01,0x14,0x00,0x00,0x02,0x45,0x05,0x00,
+0x01,0x15,0x00,0x00,0x02,0x80,0x05,0x00,0x01,0x16,0x00,0x00,0x02,0x81,0x05,0x00,
+0x01,0x17,0x00,0x00,0x02,0x82,0x05,0x00,0x01,0x18,0x00,0x00,0x02,0x83,0x05,0x00,
+0x01,0x19,0x00,0x00,0x02,0x84,0x05,0x00,0x01,0x1a,0x00,0x00,0x02,0x85,0x05,0x00,
+0x01,0x1b,0x00,0x00,0x02,0x88,0x05,0x00,0x01,0x1c,0x00,0x00,0x02,0x89,0x05,0x00,
+0x01,0x1d,0x00,0x00,0x02,0x8a,0x05,0x00,0x01,0x1e,0x00,0x00,0x02,0x8b,0x05,0x00,
+0x01,0x1f,0x00,0x00,0x02,0x43,0x06,0x00,0x01,0x20,0x00,0x00,0x02,0x44,0x06,0x00,
+0x01,0x21,0x00,0x00,0x02,0x45,0x06,0x00,0x01,0x22,0x00,0x00,0x02,0x80,0x06,0x00,
+0x01,0x23,0x00,0x00,0x02,0x81,0x06,0x00,0x01,0x24,0x00,0x00,0x02,0x82,0x06,0x00,
+0x01,0x25,0x00,0x00,0x02,0x83,0x06,0x00,0x01,0x26,0x00,0x00,0x02,0x84,0x06,0x00,
+0x01,0x27,0x00,0x00,0x02,0x85,0x06,0x00,0x01,0x28,0x00,0x00,0x02,0x88,0x06,0x00,
+0x01,0x29,0x00,0x00,0x02,0x89,0x06,0x00,0x01,0x2a,0x00,0x00,0x02,0x8a,0x06,0x00,
+0x01,0x2b,0x00,0x00,0x02,0x8b,0x06,0x00,0x01,0x2c,0x00,0x00,0x02,0x8c,0x06,0x00,
+0x01,0x2d,0x00,0x00,0x02,0x42,0x07,0x00,0x01,0x2e,0x00,0x00,0x02,0x43,0x07,0x00,
+0x01,0x2f,0x00,0x00,0x02,0x44,0x07,0x00,0x01,0x30,0x00,0x00,0x02,0x45,0x07,0x00,
+0x01,0x31,0x00,0x00,0x02,0x80,0x07,0x00,0x01,0x32,0x00,0x00,0x02,0x81,0x07,0x00,
+0x01,0x33,0x00,0x00,0x02,0x82,0x07,0x00,0x01,0x34,0x00,0x00,0x02,0x83,0x07,0x00,
+0x01,0x35,0x00,0x00,0x02,0x84,0x07,0x00,0x01,0x36,0x00,0x00,0x02,0x85,0x07,0x00,
+0x01,0x37,0x00,0x00,0x02,0x88,0x07,0x00,0x01,0x38,0x00,0x00,0x02,0x89,0x07,0x00,
+0x01,0x39,0x00,0x00,0x02,0x8a,0x07,0x00,0x01,0x3a,0x00,0x00,0x02,0x8b,0x07,0x00,
+0x01,0x3b,0x00,0x00,0x02,0x8c,0x07,0x00,0x01,0x3c,0x00,0x00,0x02,0x8d,0x07,0x00,
+0x01,0x3d,0x00,0x00,0x02,0x90,0x07,0x00,0x01,0x3e,0x00,0x00,0x02,0x91,0x07,0x00,
+0x01,0x3f,0x00,0x00,0x02,0x92,0x07,0x00,0x01,0x40,0x00,0x00,0x02,0x93,0x07,0x00,
+0x01,0x41,0x00,0x00,0x02,0x94,0x07,0x00,0x01,0x42,0x00,0x00,0x02,0x95,0x07,0x00,
+0x01,0x43,0x00,0x00,0x02,0x98,0x07,0x00,0x01,0x44,0x00,0x00,0x02,0x99,0x07,0x00,
+0x01,0x45,0x00,0x00,0x02,0x9a,0x07,0x00,0x01,0x46,0x00,0x00,0x02,0x9b,0x07,0x00,
+0x01,0x47,0x00,0x00,0x02,0x9c,0x07,0x00,0x01,0x48,0x00,0x00,0x02,0x9d,0x07,0x00,
+0x01,0x49,0x00,0x00,0x02,0xa0,0x07,0x00,0x01,0x4a,0x00,0x00,0x02,0xa1,0x07,0x00,
+0x01,0x4b,0x00,0x00,0x02,0xa2,0x07,0x00,0x01,0x4c,0x00,0x00,0x02,0xa3,0x07,0x00,
+0x01,0x4d,0x00,0x00,0x02,0xa4,0x07,0x00,0x01,0x4e,0x00,0x00,0x02,0xa5,0x07,0x00,
+0x01,0x4f,0x00,0x00,0x02,0xa8,0x07,0x00,0x01,0x50,0x00,0x00,0x02,0xa9,0x07,0x00,
+0x01,0x51,0x00,0x00,0x02,0xaa,0x03,0x00,0x01,0x52,0x00,0x00,0x02,0xab,0x03,0x00,
+0x01,0x53,0x00,0x00,0x02,0xac,0x03,0x00,0x01,0x54,0x00,0x00,0x02,0xad,0x03,0x00,
+0x01,0x55,0x00,0x00,0x02,0xb0,0x03,0x00,0x01,0x56,0x00,0x00,0x02,0xb1,0x03,0x00,
+0x01,0x57,0x00,0x00,0x02,0xb2,0x03,0x00,0x01,0x58,0x00,0x00,0x02,0xb3,0x03,0x00,
+0x01,0x59,0x00,0x00,0x02,0xb4,0x03,0x00,0x01,0x5a,0x00,0x00,0x02,0xb5,0x03,0x00,
+0x01,0x5b,0x00,0x00,0x02,0xb8,0x03,0x00,0x01,0x5c,0x00,0x00,0x02,0xb9,0x03,0x00,
+0x01,0x5d,0x00,0x00,0x02,0xba,0x03,0x00,0x01,0x5e,0x00,0x00,0x02,0xbb,0x03,0x00,
+0x01,0x5f,0x00,0x00,0x02,0xbb,0x03,0x00,0x03,0x80,0x00,0x00,0x05,0x04,0x00,0x00,
+0x00,0xb7,0x00,0x00,0xfe,0x00,0x00,0x00,0xfe,0x00,0x00,0x00,0xfe,0x00,0x00,0x00,
+0x02,0x4d,0x0c,0x00,0xfe,0x00,0x00,0x00,0xfe,0x00,0x00,0x00,0x02,0x4d,0x04,0x00,
+0x00,0xbf,0x02,0x00,0xff,0xff,0xff,0x00,0xff,0xff,0xff,0x00,0x00,0xb7,0x00,0x00,
+0x01,0xe0,0x0e,0x00,0x02,0x4d,0x04,0x00,0x03,0x41,0x04,0x00,0x04,0xc3,0x08,0x00,
+0x05,0x72,0x0c,0x00,0x06,0xe6,0x00,0x00,0x07,0x2a,0x08,0x00,0x08,0x3f,0x00,0x00,
+0x09,0x35,0x03,0x00,0x0a,0xd4,0x09,0x00,0x0b,0xbb,0x07,0x00,0x0c,0x50,0x08,0x00,
+0x0d,0xdf,0x0c,0x00,0x0e,0x2b,0x00,0x00,0x0f,0x14,0x01,0x00,0x00,0xb7,0x01,0x00,
+0x01,0x01,0x00,0x00,0x02,0x00,0x04,0x00,0x01,0x02,0x00,0x00,0x02,0x01,0x04,0x00,
+0x01,0x03,0x00,0x00,0x02,0x02,0x04,0x00,0x01,0x04,0x00,0x00,0x02,0x03,0x04,0x00,
+0x01,0x05,0x00,0x00,0x02,0x04,0x04,0x00,0x01,0x06,0x00,0x00,0x02,0x05,0x04,0x00,
+0x01,0x07,0x00,0x00,0x02,0x08,0x04,0x00,0x01,0x08,0x00,0x00,0x02,0x09,0x04,0x00,
+0x01,0x09,0x00,0x00,0x02,0x0a,0x04,0x00,0x01,0x0a,0x00,0x00,0x02,0x0b,0x04,0x00,
+0x01,0x0b,0x00,0x00,0x02,0x02,0x05,0x00,0x01,0x0c,0x00,0x00,0x02,0x03,0x05,0x00,
+0x01,0x0d,0x00,0x00,0x02,0x04,0x05,0x00,0x01,0x0e,0x00,0x00,0x02,0x05,0x05,0x00,
+0x01,0x0f,0x00,0x00,0x02,0x40,0x05,0x00,0x01,0x10,0x00,0x00,0x02,0x41,0x05,0x00,
+0x01,0x11,0x00,0x00,0x02,0x42,0x05,0x00,0x01,0x12,0x00,0x00,0x02,0x43,0x05,0x00,
+0x01,0x13,0x00,0x00,0x02,0x44,0x05,0x00,0x01,0x14,0x00,0x00,0x02,0x45,0x05,0x00,
+0x01,0x15,0x00,0x00,0x02,0x80,0x05,0x00,0x01,0x16,0x00,0x00,0x02,0x81,0x05,0x00,
+0x01,0x17,0x00,0x00,0x02,0x82,0x05,0x00,0x01,0x18,0x00,0x00,0x02,0x83,0x05,0x00,
+0x01,0x19,0x00,0x00,0x02,0x84,0x05,0x00,0x01,0x1a,0x00,0x00,0x02,0x85,0x05,0x00,
+0x01,0x1b,0x00,0x00,0x02,0x88,0x05,0x00,0x01,0x1c,0x00,0x00,0x02,0x89,0x05,0x00,
+0x01,0x1d,0x00,0x00,0x02,0x8a,0x05,0x00,0x01,0x1e,0x00,0x00,0x02,0x8b,0x05,0x00,
+0x01,0x1f,0x00,0x00,0x02,0x43,0x06,0x00,0x01,0x20,0x00,0x00,0x02,0x44,0x06,0x00,
+0x01,0x21,0x00,0x00,0x02,0x45,0x06,0x00,0x01,0x22,0x00,0x00,0x02,0x80,0x06,0x00,
+0x01,0x23,0x00,0x00,0x02,0x81,0x06,0x00,0x01,0x24,0x00,0x00,0x02,0x82,0x06,0x00,
+0x01,0x25,0x00,0x00,0x02,0x83,0x06,0x00,0x01,0x26,0x00,0x00,0x02,0x84,0x06,0x00,
+0x01,0x27,0x00,0x00,0x02,0x85,0x06,0x00,0x01,0x28,0x00,0x00,0x02,0x88,0x06,0x00,
+0x01,0x29,0x00,0x00,0x02,0x89,0x06,0x00,0x01,0x2a,0x00,0x00,0x02,0x8a,0x06,0x00,
+0x01,0x2b,0x00,0x00,0x02,0x8b,0x06,0x00,0x01,0x2c,0x00,0x00,0x02,0x8c,0x06,0x00,
+0x01,0x2d,0x00,0x00,0x02,0x42,0x07,0x00,0x01,0x2e,0x00,0x00,0x02,0x43,0x07,0x00,
+0x01,0x2f,0x00,0x00,0x02,0x44,0x07,0x00,0x01,0x30,0x00,0x00,0x02,0x45,0x07,0x00,
+0x01,0x31,0x00,0x00,0x02,0x80,0x07,0x00,0x01,0x32,0x00,0x00,0x02,0x81,0x07,0x00,
+0x01,0x33,0x00,0x00,0x02,0x82,0x07,0x00,0x01,0x34,0x00,0x00,0x02,0x83,0x07,0x00,
+0x01,0x35,0x00,0x00,0x02,0x84,0x07,0x00,0x01,0x36,0x00,0x00,0x02,0x85,0x07,0x00,
+0x01,0x37,0x00,0x00,0x02,0x88,0x07,0x00,0x01,0x38,0x00,0x00,0x02,0x89,0x07,0x00,
+0x01,0x39,0x00,0x00,0x02,0x8a,0x07,0x00,0x01,0x3a,0x00,0x00,0x02,0x8b,0x07,0x00,
+0x01,0x3b,0x00,0x00,0x02,0x8c,0x07,0x00,0x01,0x3c,0x00,0x00,0x02,0x8d,0x07,0x00,
+0x01,0x3d,0x00,0x00,0x02,0x90,0x07,0x00,0x01,0x3e,0x00,0x00,0x02,0x91,0x07,0x00,
+0x01,0x3f,0x00,0x00,0x02,0x92,0x07,0x00,0x01,0x40,0x00,0x00,0x02,0x93,0x07,0x00,
+0x01,0x41,0x00,0x00,0x02,0x94,0x07,0x00,0x01,0x42,0x00,0x00,0x02,0x95,0x07,0x00,
+0x01,0x43,0x00,0x00,0x02,0x98,0x07,0x00,0x01,0x44,0x00,0x00,0x02,0x99,0x07,0x00,
+0x01,0x45,0x00,0x00,0x02,0x9a,0x07,0x00,0x01,0x46,0x00,0x00,0x02,0x9b,0x07,0x00,
+0x01,0x47,0x00,0x00,0x02,0x9c,0x07,0x00,0x01,0x48,0x00,0x00,0x02,0x9d,0x07,0x00,
+0x01,0x49,0x00,0x00,0x02,0xa0,0x07,0x00,0x01,0x4a,0x00,0x00,0x02,0xa1,0x07,0x00,
+0x01,0x4b,0x00,0x00,0x02,0xa2,0x07,0x00,0x01,0x4c,0x00,0x00,0x02,0xa3,0x07,0x00,
+0x01,0x4d,0x00,0x00,0x02,0xa4,0x07,0x00,0x01,0x4e,0x00,0x00,0x02,0xa5,0x07,0x00,
+0x01,0x4f,0x00,0x00,0x02,0xa8,0x07,0x00,0x01,0x50,0x00,0x00,0x02,0xa9,0x07,0x00,
+0x01,0x51,0x00,0x00,0x02,0xaa,0x03,0x00,0x01,0x52,0x00,0x00,0x02,0xab,0x03,0x00,
+0x01,0x53,0x00,0x00,0x02,0xac,0x03,0x00,0x01,0x54,0x00,0x00,0x02,0xad,0x03,0x00,
+0x01,0x55,0x00,0x00,0x02,0xb0,0x03,0x00,0x01,0x56,0x00,0x00,0x02,0xb1,0x03,0x00,
+0x01,0x57,0x00,0x00,0x02,0xb2,0x03,0x00,0x01,0x58,0x00,0x00,0x02,0xb3,0x03,0x00,
+0x01,0x59,0x00,0x00,0x02,0xb4,0x03,0x00,0x01,0x5a,0x00,0x00,0x02,0xb5,0x03,0x00,
+0x01,0x5b,0x00,0x00,0x02,0xb8,0x03,0x00,0x01,0x5c,0x00,0x00,0x02,0xb9,0x03,0x00,
+0x01,0x5d,0x00,0x00,0x02,0xba,0x03,0x00,0x01,0x5e,0x00,0x00,0x02,0xbb,0x03,0x00,
+0x01,0x5f,0x00,0x00,0x02,0xbb,0x03,0x00,0x03,0x80,0x00,0x00,0x05,0x04,0x00,0x00,
+0x00,0xb7,0x00,0x00,0xfe,0x00,0x00,0x00,0xfe,0x00,0x00,0x00,0xfe,0x00,0x00,0x00,
+0x02,0x4d,0x0c,0x00,0xfe,0x00,0x00,0x00,0xfe,0x00,0x00,0x00,0x02,0x4d,0x04,0x00,
+0x00,0xbf,0x02,0x00,0xff,0xff,0xff,0x00,0xff,0xff,0xff,0x00,0x0a,0x00,0x00,0x00,
+0x4f,0x6e,0x41,0x73,0x73,0x6f,0x63,0x52,0x65,0x71,0x00,0x00,0x4f,0x6e,0x41,0x73,
+0x73,0x6f,0x63,0x52,0x73,0x70,0x00,0x00,0x4f,0x6e,0x52,0x65,0x41,0x73,0x73,0x6f,
+0x63,0x52,0x65,0x71,0x00,0x00,0x00,0x00,0x4f,0x6e,0x52,0x65,0x41,0x73,0x73,0x6f,
+0x63,0x52,0x73,0x70,0x00,0x00,0x00,0x00,0x4f,0x6e,0x50,0x72,0x6f,0x62,0x65,0x52,
+0x65,0x71,0x00,0x00,0x4f,0x6e,0x50,0x72,0x6f,0x62,0x65,0x52,0x73,0x70,0x00,0x00,
+0x44,0x6f,0x52,0x65,0x73,0x65,0x72,0x76,0x65,0x64,0x00,0x00,0x44,0x6f,0x52,0x65,
+0x73,0x65,0x72,0x76,0x65,0x64,0x00,0x00,0x4f,0x6e,0x42,0x65,0x61,0x63,0x6f,0x6e,
+0x00,0x00,0x00,0x00,0x4f,0x6e,0x41,0x54,0x49,0x4d,0x00,0x00,0x4f,0x6e,0x44,0x69,
+0x73,0x61,0x73,0x73,0x6f,0x63,0x00,0x00,0x4f,0x6e,0x41,0x75,0x74,0x68,0x00,0x00,
+0x4f,0x6e,0x44,0x65,0x41,0x75,0x74,0x68,0x00,0x00,0x00,0x00,0x4f,0x6e,0x41,0x63,
+0x74,0x69,0x6f,0x6e,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x88,0x8b,0x01,0x80,
+0x28,0x14,0x01,0x80,0x10,0x00,0x00,0x00,0x94,0x8b,0x01,0x80,0x30,0x14,0x01,0x80,
+0x20,0x00,0x00,0x00,0xa0,0x8b,0x01,0x80,0x28,0x14,0x01,0x80,0x30,0x00,0x00,0x00,
+0xb0,0x8b,0x01,0x80,0x30,0x14,0x01,0x80,0x40,0x00,0x00,0x00,0xc0,0x8b,0x01,0x80,
+0x38,0x14,0x01,0x80,0x50,0x00,0x00,0x00,0xcc,0x8b,0x01,0x80,0x40,0x14,0x01,0x80,
+0x00,0x00,0x00,0x00,0xd8,0x8b,0x01,0x80,0xa8,0x14,0x01,0x80,0x00,0x00,0x00,0x00,
+0xe4,0x8b,0x01,0x80,0xa8,0x14,0x01,0x80,0x80,0x00,0x00,0x00,0xf0,0x8b,0x01,0x80,
+0x48,0x14,0x01,0x80,0x90,0x00,0x00,0x00,0xfc,0x8b,0x01,0x80,0x50,0x14,0x01,0x80,
+0xa0,0x00,0x00,0x00,0x04,0x8c,0x01,0x80,0x58,0x14,0x01,0x80,0xb0,0x00,0x00,0x00,
+0x10,0x8c,0x01,0x80,0x90,0x14,0x01,0x80,0xc0,0x00,0x00,0x00,0x18,0x8c,0x01,0x80,
+0x98,0x14,0x01,0x80,0xd0,0x00,0x00,0x00,0x24,0x8c,0x01,0x80,0xa0,0x14,0x01,0x80,
+0x00,0x00,0x00,0x00,0xdc,0x8c,0x01,0x80,0xdc,0x8c,0x01,0x80,0x31,0x10,0x10,0x00,
+0x00,0x30,0x00,0x00,0x31,0x20,0x10,0x00,0x00,0x30,0x00,0x00,0x31,0x28,0x10,0x00,
+0x00,0x30,0x00,0x00,0x31,0x2c,0x10,0x10,0x00,0x30,0x00,0x00,0x31,0x2f,0x10,0x10,
+0x00,0x30,0x00,0x00,0x31,0x30,0x18,0x00,0x00,0x30,0x00,0x00,0x31,0x30,0x20,0x10,
+0x00,0x30,0x00,0x00,0x22,0x20,0x18,0x08,0x00,0x20,0x00,0x00,0x22,0x21,0x14,0x08,
+0x00,0x20,0x00,0x00,0x22,0x21,0x1c,0x08,0x00,0x20,0x00,0x00,0x22,0x21,0x20,0x08,
+0x00,0x20,0x00,0x00,0x22,0x21,0x20,0x10,0x00,0x20,0x00,0x00,0x22,0x21,0x20,0x18,
+0x00,0x20,0x00,0x00,0x1a,0x19,0x18,0x10,0x00,0x18,0x00,0x00,0x12,0x11,0x10,0x08,
+0x00,0x10,0x00,0x00,0x0a,0x09,0x08,0x00,0x00,0x08,0x00,0x00,0x0a,0x09,0x08,0x02,
+0x00,0x08,0x00,0x00,0x0a,0x09,0x08,0x04,0x00,0x08,0x00,0x00,0x0a,0x09,0x08,0x06,
+0x00,0x08,0x00,0x00,0x08,0x07,0x06,0x04,0x00,0x06,0x00,0x00,0x06,0x05,0x04,0x02,
+0x00,0x04,0x00,0x00,0x06,0x05,0x04,0x03,0x00,0x04,0x00,0x00,0x05,0x04,0x03,0x02,
+0x00,0x03,0x00,0x00,0x09,0x08,0x07,0x06,0x07,0x06,0x06,0x05,0x05,0x04,0x04,0x03,
+0x06,0x05,0x05,0x04,0x04,0x03,0x03,0x03,0x05,0x04,0x04,0x03,0x03,0x02,0x02,0x02,
+0x00,0x09,0x08,0x07,0x06,0x07,0x06,0x06,0x05,0x05,0x04,0x04,0x03,0x05,0x04,0x04,
+0x03,0x03,0x02,0x02,0x02,0x04,0x03,0x03,0x02,0x02,0x01,0x01,0x01,0x00,0x00,0x00,
+0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x10,0x10,0x20,0x08,0x08,0x08,0x08,
+0x20,0x20,0x20,0x20,0x08,0x08,0x08,0x08,0x08,0x20,0x20,0x20,0x30,0x08,0x08,0x08,
+0x08,0x18,0x18,0x18,0x18,0x18,0x20,0x30,0x30,0x10,0x20,0x20,0x20,0x20,0x20,0x30,
+0x30,0x08,0x10,0x20,0x30,0x30,0x30,0x30,0x30,0x30,0x00,0x00,0x08,0x08,0x08,0x08,
+0x08,0x08,0x08,0x08,0x08,0x10,0x10,0x20,0x08,0x08,0x08,0x08,0x08,0x20,0x20,0x20,
+0x08,0x08,0x08,0x08,0x08,0x20,0x20,0x20,0x20,0x08,0x08,0x08,0x08,0x18,0x18,0x18,
+0x18,0x18,0x20,0x30,0x30,0x10,0x20,0x20,0x20,0x20,0x20,0x30,0x30,0x08,0x10,0x20,
+0x30,0x30,0x30,0x30,0x30,0x30,0x00,0x00,0x0a,0x09,0x08,0x04,0x00,0x0a,0x09,0x08,
+0x04,0x00,0x0a,0x09,0x08,0x04,0x00,0x0a,0x09,0x08,0x04,0x00,0x0a,0x09,0x08,0x00,
+0x00,0x0a,0x09,0x08,0x00,0x00,0x0a,0x09,0x08,0x00,0x00,0x0a,0x09,0x08,0x00,0x00,
+0x0a,0x09,0x08,0x00,0x00,0x12,0x11,0x10,0x08,0x00,0x12,0x11,0x10,0x08,0x00,0x22,
+0x21,0x20,0x18,0x00,0x0a,0x09,0x08,0x00,0x00,0x0a,0x09,0x08,0x00,0x00,0x0a,0x09,
+0x08,0x00,0x00,0x0a,0x09,0x08,0x00,0x00,0x22,0x21,0x20,0x18,0x00,0x22,0x21,0x20,
+0x18,0x00,0x22,0x21,0x1c,0x08,0x00,0x22,0x20,0x18,0x08,0x00,0x0a,0x09,0x08,0x02,
+0x00,0x0a,0x09,0x08,0x02,0x00,0x0a,0x09,0x08,0x02,0x00,0x0a,0x09,0x08,0x02,0x00,
+0x0a,0x09,0x08,0x00,0x00,0x22,0x21,0x20,0x10,0x00,0x22,0x21,0x20,0x08,0x00,0x22,
+0x21,0x1c,0x08,0x00,0x31,0x30,0x18,0x00,0x00,0x0a,0x09,0x08,0x04,0x00,0x0a,0x09,
+0x08,0x04,0x00,0x0a,0x09,0x08,0x04,0x00,0x0a,0x09,0x08,0x04,0x00,0x1a,0x19,0x18,
+0x10,0x00,0x1a,0x19,0x18,0x10,0x00,0x1a,0x19,0x18,0x10,0x00,0x1a,0x19,0x18,0x10,
+0x00,0x1a,0x19,0x18,0x10,0x00,0x22,0x21,0x20,0x08,0x00,0x31,0x2c,0x10,0x10,0x00,
+0x31,0x28,0x10,0x00,0x00,0x12,0x11,0x10,0x08,0x00,0x22,0x21,0x20,0x18,0x00,0x22,
+0x21,0x20,0x18,0x00,0x22,0x21,0x20,0x08,0x00,0x22,0x21,0x14,0x08,0x00,0x22,0x20,
+0x18,0x08,0x00,0x31,0x30,0x20,0x10,0x00,0x31,0x2c,0x10,0x10,0x00,0x0a,0x09,0x08,
+0x00,0x00,0x12,0x11,0x10,0x08,0x00,0x22,0x21,0x20,0x18,0x00,0x22,0x21,0x20,0x18,
+0x00,0x31,0x30,0x20,0x10,0x00,0x31,0x2f,0x10,0x10,0x00,0x31,0x2f,0x10,0x10,0x00,
+0x31,0x10,0x10,0x00,0x00,0x31,0x2c,0x10,0x10,0x00,0x00,0x00,0x0a,0x09,0x08,0x04,
+0x00,0x0a,0x09,0x08,0x04,0x00,0x0a,0x09,0x08,0x04,0x00,0x0a,0x09,0x08,0x04,0x00,
+0x0a,0x09,0x08,0x00,0x00,0x0a,0x09,0x08,0x00,0x00,0x0a,0x09,0x08,0x00,0x00,0x0a,
+0x09,0x08,0x00,0x00,0x0a,0x09,0x08,0x00,0x00,0x12,0x11,0x10,0x08,0x00,0x12,0x11,
+0x10,0x08,0x00,0x22,0x21,0x20,0x18,0x00,0x0a,0x09,0x08,0x04,0x00,0x0a,0x09,0x08,
+0x04,0x00,0x0a,0x09,0x08,0x02,0x00,0x0a,0x09,0x08,0x00,0x00,0x0a,0x09,0x08,0x00,
+0x00,0x22,0x21,0x20,0x18,0x00,0x22,0x21,0x1c,0x08,0x00,0x22,0x21,0x14,0x08,0x00,
+0x0a,0x09,0x08,0x02,0x00,0x0a,0x09,0x08,0x02,0x00,0x0a,0x09,0x08,0x02,0x00,0x0a,
+0x09,0x08,0x02,0x00,0x0a,0x09,0x08,0x00,0x00,0x22,0x21,0x20,0x10,0x00,0x22,0x21,
+0x20,0x08,0x00,0x22,0x21,0x14,0x08,0x00,0x22,0x21,0x14,0x08,0x00,0x0a,0x09,0x08,
+0x04,0x00,0x0a,0x09,0x08,0x04,0x00,0x0a,0x09,0x08,0x04,0x00,0x0a,0x09,0x08,0x04,
+0x00,0x1a,0x19,0x18,0x10,0x00,0x1a,0x19,0x18,0x10,0x00,0x1a,0x19,0x18,0x10,0x00,
+0x1a,0x19,0x18,0x10,0x00,0x1a,0x19,0x18,0x10,0x00,0x22,0x21,0x20,0x08,0x00,0x31,
+0x2c,0x10,0x10,0x00,0x31,0x28,0x10,0x00,0x00,0x12,0x11,0x10,0x08,0x00,0x22,0x21,
+0x20,0x18,0x00,0x22,0x21,0x20,0x18,0x00,0x22,0x21,0x20,0x08,0x00,0x22,0x21,0x14,
+0x08,0x00,0x22,0x20,0x18,0x08,0x00,0x31,0x30,0x20,0x10,0x00,0x31,0x2c,0x10,0x10,
+0x00,0x0a,0x09,0x08,0x00,0x00,0x12,0x11,0x10,0x08,0x00,0x22,0x21,0x20,0x18,0x00,
+0x22,0x21,0x20,0x18,0x00,0x31,0x30,0x20,0x10,0x00,0x31,0x2f,0x10,0x10,0x00,0x31,
+0x2f,0x10,0x10,0x00,0x31,0x10,0x10,0x00,0x00,0x31,0x2c,0x10,0x10,0x00,0x00,0x00,
+0x01,0x02,0x04,0x08,0x02,0x04,0x08,0x0c,0x10,0x18,0x20,0x30,0x02,0x04,0x08,0x0c,
+0x10,0x18,0x20,0x30,0x06,0x0c,0x10,0x18,0x24,0x30,0x3c,0x48,0x48,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x25,0x27,0x2c,0x19,0x1b,0x1e,0x20,
+0x23,0x29,0x2a,0x2b,0x00,0x00,0x00,0x00,0x25,0x29,0x2b,0x2e,0x2e,0x00,0x00,0x00,
+0x04,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x08,0x00,0x00,0x00,0x10,0x00,0x00,0x00,
+0x18,0x00,0x00,0x00,0x24,0x00,0x00,0x00,0x30,0x00,0x00,0x00,0x48,0x00,0x00,0x00,
+0x60,0x00,0x00,0x00,0x90,0x00,0x00,0x00,0xc0,0x00,0x00,0x00,0xd8,0x00,0x00,0x00,
+0x50,0x00,0x00,0x00,0x78,0x00,0x00,0x00,0xa0,0x00,0x00,0x00,0xc8,0x00,0x00,0x00,
+0x40,0x01,0x00,0x00,0x90,0x01,0x00,0x00,0xe0,0x01,0x00,0x00,0x30,0x02,0x00,0x00,
+0x2c,0x01,0x00,0x00,0x40,0x01,0x00,0x00,0xe0,0x01,0x00,0x00,0xd0,0x02,0x00,0x00,
+0x80,0x0c,0x00,0x00,0x80,0x0c,0x00,0x00,0x80,0x0c,0x00,0x00,0xa0,0x0f,0x00,0x00,
+0xa0,0x0f,0x00,0x00,0x02,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x04,0x00,0x00,0x00,
+0x08,0x00,0x00,0x00,0x0c,0x00,0x00,0x00,0x12,0x00,0x00,0x00,0x18,0x00,0x00,0x00,
+0x24,0x00,0x00,0x00,0x30,0x00,0x00,0x00,0x48,0x00,0x00,0x00,0x60,0x00,0x00,0x00,
+0x6c,0x00,0x00,0x00,0x28,0x00,0x00,0x00,0x3c,0x00,0x00,0x00,0x50,0x00,0x00,0x00,
+0x64,0x00,0x00,0x00,0xa0,0x00,0x00,0x00,0xc8,0x00,0x00,0x00,0xf0,0x00,0x00,0x00,
+0x18,0x01,0x00,0x00,0x64,0x00,0x00,0x00,0xa0,0x00,0x00,0x00,0xf0,0x00,0x00,0x00,
+0x68,0x01,0x00,0x00,0x40,0x06,0x00,0x00,0x40,0x06,0x00,0x00,0x40,0x06,0x00,0x00,
+0xd0,0x07,0x00,0x00,0xd0,0x07,0x00,0x00,0x2c,0x05,0x00,0x80,0x20,0x05,0x00,0x80,
+0x14,0x05,0x00,0x80,0x08,0x05,0x00,0x80,0xfc,0x04,0x00,0x80,0xf0,0x04,0x00,0x80,
+0xe4,0x04,0x00,0x80,0xd8,0x04,0x00,0x80,0xcc,0x04,0x00,0x80,0xc0,0x04,0x00,0x80,
+0x78,0x04,0x00,0x80,0x68,0x15,0x02,0x80,0xc0,0x3a,0x00,0x80,0xcc,0x3a,0x00,0x80,
+0xd8,0x3a,0x00,0x80,0xe4,0x3a,0x00,0x80,0xc0,0x3a,0x00,0x80,0xc0,0x3a,0x00,0x80,
+0xc0,0x3a,0x00,0x80,0xc0,0x3a,0x00,0x80,0xf0,0x3a,0x00,0x80,0xfc,0x3a,0x00,0x80,
+0x08,0x3b,0x00,0x80,0x14,0x3b,0x00,0x80,0x68,0x15,0x02,0x80,0xfe,0x01,0x80,0x7f,
+0xe2,0x01,0x80,0x78,0xc7,0x01,0xc0,0x71,0xae,0x01,0x80,0x6b,0x95,0x01,0x40,0x65,
+0x7f,0x01,0xc0,0x5f,0x69,0x01,0x40,0x5a,0x55,0x01,0x40,0x55,0x42,0x01,0x80,0x50,
+0x30,0x01,0x00,0x4c,0x1f,0x01,0xc0,0x47,0x0f,0x01,0xc0,0x43,0x00,0x01,0x00,0x40,
+0xf2,0x00,0x80,0x3c,0xe4,0x00,0x00,0x39,0xd7,0x00,0xc0,0x35,0xcb,0x00,0xc0,0x32,
+0xc0,0x00,0x00,0x30,0xb5,0x00,0x40,0x2d,0xab,0x00,0xc0,0x2a,0xa2,0x00,0x80,0x28,
+0x98,0x00,0x00,0x26,0x90,0x00,0x00,0x24,0x88,0x00,0x00,0x22,0x80,0x00,0x00,0x20,
+0x79,0x00,0x40,0x1e,0x72,0x00,0x80,0x1c,0x6c,0x00,0x00,0x1b,0x66,0x00,0x80,0x19,
+0x60,0x00,0x00,0x18,0x5b,0x00,0xc0,0x16,0x56,0x00,0x80,0x15,0x51,0x00,0x40,0x14,
+0x4c,0x00,0x00,0x13,0x48,0x00,0x00,0x12,0x44,0x00,0x00,0x11,0x40,0x00,0x00,0x10,
+0x36,0x35,0x2e,0x25,0x1c,0x12,0x09,0x04,0x33,0x32,0x2b,0x23,0x1a,0x11,0x08,0x04,
+0x30,0x2f,0x29,0x21,0x19,0x10,0x08,0x03,0x2d,0x2d,0x27,0x1f,0x18,0x0f,0x08,0x03,
+0x2b,0x2a,0x25,0x1e,0x16,0x0e,0x07,0x03,0x28,0x28,0x22,0x1c,0x15,0x0d,0x07,0x03,
+0x26,0x25,0x21,0x1b,0x14,0x0d,0x06,0x03,0x24,0x23,0x1f,0x19,0x13,0x0c,0x06,0x03,
+0x22,0x21,0x1d,0x18,0x11,0x0b,0x06,0x02,0x20,0x20,0x1b,0x16,0x11,0x08,0x05,0x02,
+0x1f,0x1e,0x1a,0x15,0x10,0x0a,0x05,0x02,0x1d,0x1c,0x18,0x14,0x0f,0x0a,0x05,0x02,
+0x1b,0x1a,0x17,0x13,0x0e,0x09,0x04,0x02,0x1a,0x19,0x16,0x12,0x0d,0x09,0x04,0x02,
+0x18,0x17,0x15,0x11,0x0c,0x08,0x04,0x02,0x17,0x16,0x13,0x10,0x0c,0x08,0x04,0x02,
+0x16,0x15,0x12,0x0f,0x0b,0x07,0x04,0x01,0x14,0x14,0x11,0x0e,0x0b,0x07,0x03,0x02,
+0x13,0x13,0x10,0x0d,0x0a,0x06,0x03,0x01,0x12,0x12,0x0f,0x0c,0x09,0x06,0x03,0x01,
+0x11,0x11,0x0f,0x0c,0x09,0x06,0x03,0x01,0x10,0x10,0x0e,0x0b,0x08,0x05,0x03,0x01,
+0x0f,0x0f,0x0d,0x0b,0x08,0x05,0x03,0x01,0x0e,0x0e,0x0c,0x0a,0x08,0x05,0x02,0x01,
+0x0d,0x0d,0x0c,0x0a,0x07,0x05,0x02,0x01,0x0d,0x0c,0x0b,0x09,0x07,0x04,0x02,0x01,
+0x0c,0x0c,0x0a,0x09,0x06,0x04,0x02,0x01,0x0b,0x0b,0x0a,0x08,0x06,0x04,0x02,0x01,
+0x0b,0x0a,0x09,0x08,0x06,0x04,0x02,0x01,0x0a,0x0a,0x09,0x07,0x05,0x03,0x02,0x01,
+0x0a,0x09,0x08,0x07,0x05,0x03,0x02,0x01,0x09,0x09,0x08,0x06,0x05,0x03,0x01,0x01,
+0x09,0x08,0x07,0x06,0x04,0x03,0x01,0x01,0x36,0x35,0x2e,0x1b,0x00,0x00,0x00,0x00,
+0x33,0x32,0x2b,0x19,0x00,0x00,0x00,0x00,0x30,0x2f,0x29,0x18,0x00,0x00,0x00,0x00,
+0x2d,0x2d,0x17,0x17,0x00,0x00,0x00,0x00,0x2b,0x2a,0x25,0x15,0x00,0x00,0x00,0x00,
+0x28,0x28,0x24,0x14,0x00,0x00,0x00,0x00,0x26,0x25,0x21,0x13,0x00,0x00,0x00,0x00,
+0x24,0x23,0x1f,0x12,0x00,0x00,0x00,0x00,0x22,0x21,0x1d,0x11,0x00,0x00,0x00,0x00,
+0x20,0x20,0x1b,0x10,0x00,0x00,0x00,0x00,0x1f,0x1e,0x1a,0x0f,0x00,0x00,0x00,0x00,
+0x1d,0x1c,0x18,0x0e,0x00,0x00,0x00,0x00,0x1b,0x1a,0x17,0x0e,0x00,0x00,0x00,0x00,
+0x1a,0x19,0x16,0x0d,0x00,0x00,0x00,0x00,0x18,0x17,0x15,0x0c,0x00,0x00,0x00,0x00,
+0x17,0x16,0x13,0x0b,0x00,0x00,0x00,0x00,0x16,0x15,0x12,0x0b,0x00,0x00,0x00,0x00,
+0x14,0x14,0x11,0x0a,0x00,0x00,0x00,0x00,0x13,0x13,0x10,0x0a,0x00,0x00,0x00,0x00,
+0x12,0x12,0x0f,0x09,0x00,0x00,0x00,0x00,0x11,0x11,0x0f,0x09,0x00,0x00,0x00,0x00,
+0x10,0x10,0x0e,0x08,0x00,0x00,0x00,0x00,0x0f,0x0f,0x0d,0x08,0x00,0x00,0x00,0x00,
+0x0e,0x0e,0x0c,0x07,0x00,0x00,0x00,0x00,0x0d,0x0d,0x0c,0x07,0x00,0x00,0x00,0x00,
+0x0d,0x0c,0x0b,0x06,0x00,0x00,0x00,0x00,0x0c,0x0c,0x0a,0x06,0x00,0x00,0x00,0x00,
+0x0b,0x0b,0x0a,0x06,0x00,0x00,0x00,0x00,0x0b,0x0a,0x09,0x05,0x00,0x00,0x00,0x00,
+0x0a,0x0a,0x09,0x05,0x00,0x00,0x00,0x00,0x0a,0x09,0x08,0x05,0x00,0x00,0x00,0x00,
+0x09,0x09,0x08,0x05,0x00,0x00,0x00,0x00,0x09,0x08,0x07,0x04,0x00,0x00,0x00,0x00,
+0x06,0x00,0x2a,0xb0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,
+0x08,0x28,0x28,0x28,0x28,0x28,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,
+0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0xa0,0x10,0x10,0x10,0x10,0x10,0x10,0x10,
+0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,
+0x04,0x04,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x41,0x41,0x41,0x41,0x41,0x41,0x01,
+0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
+0x01,0x01,0x01,0x10,0x10,0x10,0x10,0x10,0x10,0x42,0x42,0x42,0x42,0x42,0x42,0x02,
+0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,
+0x02,0x02,0x02,0x10,0x10,0x10,0x10,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xa0,0x10,0x10,0x10,0x10,0x10,0x10,0x10,
+0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,
+0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
+0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x10,
+0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,
+0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x10,
+0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x00,0x19,0x77,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x26,0x72,0xb0,0x00,0x26,0x72,0xb0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x26,0x65,0x60,0xff,0xff,0xff,0xff,0x00,0x00,0x00,0x02,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0xf2,0x30,0xb8,0xff,0xff,0xff,0xff,
+};
+
+u8 Rtl8192SUFwMainArray[MainArrayLength] = {
+0x0, };
+
+u8 Rtl8192SUFwDataArray[DataArrayLength] = {
+0x0, };
+
+u32 Rtl8192SUPHY_REG_2T2RArray[PHY_REG_2T2RArrayLength] = {
+0x01c,0x07000000,
+0x800,0x00040000,
+0x804,0x00008003,
+0x808,0x0000fc00,
+0x80c,0x0000000a,
+0x810,0x10005088,
+0x814,0x020c3d10,
+0x818,0x00200185,
+0x81c,0x00000000,
+0x820,0x01000000,
+0x824,0x00390004,
+0x828,0x01000000,
+0x82c,0x00390004,
+0x830,0x00000004,
+0x834,0x00690200,
+0x838,0x00000004,
+0x83c,0x00690200,
+0x840,0x00010000,
+0x844,0x00010000,
+0x848,0x00000000,
+0x84c,0x00000000,
+0x850,0x00000000,
+0x854,0x00000000,
+0x858,0x48484848,
+0x85c,0x65a965a9,
+0x860,0x0f7f0130,
+0x864,0x0f7f0130,
+0x868,0x0f7f0130,
+0x86c,0x0f7f0130,
+0x870,0x03000700,
+0x874,0x03000300,
+0x878,0x00020002,
+0x87c,0x004f0201,
+0x880,0xa8300ac1,
+0x884,0x00000058,
+0x888,0x00000008,
+0x88c,0x00000004,
+0x890,0x00000000,
+0x894,0xfffffffe,
+0x898,0x40302010,
+0x89c,0x00706050,
+0x8b0,0x00000000,
+0x8e0,0x00000000,
+0x8e4,0x00000000,
+0xe00,0x30333333,
+0xe04,0x2a2d2e2f,
+0xe08,0x00003232,
+0xe10,0x30333333,
+0xe14,0x2a2d2e2f,
+0xe18,0x30333333,
+0xe1c,0x2a2d2e2f,
+0xe30,0x01007c00,
+0xe34,0x01004800,
+0xe38,0x1000dc1f,
+0xe3c,0x10008c1f,
+0xe40,0x021400a0,
+0xe44,0x281600a0,
+0xe48,0xf8000001,
+0xe4c,0x00002910,
+0xe50,0x01007c00,
+0xe54,0x01004800,
+0xe58,0x1000dc1f,
+0xe5c,0x10008c1f,
+0xe60,0x021400a0,
+0xe64,0x281600a0,
+0xe6c,0x00002910,
+0xe70,0x31ed92fb,
+0xe74,0x361536fb,
+0xe78,0x361536fb,
+0xe7c,0x361536fb,
+0xe80,0x361536fb,
+0xe84,0x000d92fb,
+0xe88,0x000d92fb,
+0xe8c,0x31ed92fb,
+0xed0,0x31ed92fb,
+0xed4,0x31ed92fb,
+0xed8,0x000d92fb,
+0xedc,0x000d92fb,
+0xee0,0x000d92fb,
+0xee4,0x015e5448,
+0xee8,0x21555448,
+0x900,0x00000000,
+0x904,0x00000023,
+0x908,0x00000000,
+0x90c,0x03321333,
+0xa00,0x00d047c8,
+0xa04,0x80ff0008,
+0xa08,0x8ccd8300,
+0xa0c,0x2e62120f,
+0xa10,0x9500bb78,
+0xa14,0x11144028,
+0xa18,0x00881117,
+0xa1c,0x89140f00,
+0xa20,0x1a1b0000,
+0xa24,0x090e1317,
+0xa28,0x00000204,
+0xa2c,0x10d30000,
+0xc00,0x40071d40,
+0xc04,0x00a05633,
+0xc08,0x000000e4,
+0xc0c,0x6c6c6c6c,
+0xc10,0x08800000,
+0xc14,0x40000100,
+0xc18,0x08000000,
+0xc1c,0x40000100,
+0xc20,0x08000000,
+0xc24,0x40000100,
+0xc28,0x08000000,
+0xc2c,0x40000100,
+0xc30,0x6de9ac44,
+0xc34,0x469652cf,
+0xc38,0x49795994,
+0xc3c,0x0a979764,
+0xc40,0x1f7c403f,
+0xc44,0x000100b7,
+0xc48,0xec020000,
+0xc4c,0x007f037f,
+0xc50,0x69543420,
+0xc54,0x433c0094,
+0xc58,0x69543420,
+0xc5c,0x433c0094,
+0xc60,0x69543420,
+0xc64,0x433c0094,
+0xc68,0x69543420,
+0xc6c,0x433c0094,
+0xc70,0x2c7f000d,
+0xc74,0x0186155b,
+0xc78,0x0000001f,
+0xc7c,0x00b91612,
+0xc80,0x40000100,
+0xc84,0x20f60000,
+0xc88,0x20000080,
+0xc8c,0x20200000,
+0xc90,0x40000100,
+0xc94,0x00000000,
+0xc98,0x40000100,
+0xc9c,0x00000000,
+0xca0,0x00492492,
+0xca4,0x00000000,
+0xca8,0x00000000,
+0xcac,0x00000000,
+0xcb0,0x00000000,
+0xcb4,0x00000000,
+0xcb8,0x00000000,
+0xcbc,0x28000000,
+0xcc0,0x00000000,
+0xcc4,0x00000000,
+0xcc8,0x00000000,
+0xccc,0x00000000,
+0xcd0,0x00000000,
+0xcd4,0x00000000,
+0xcd8,0x64b22427,
+0xcdc,0x00766932,
+0xce0,0x00222222,
+0xce4,0x00000000,
+0xce8,0x37644302,
+0xcec,0x2f97d40c,
+0xd00,0x00000750,
+0xd04,0x00000403,
+0xd08,0x0000907f,
+0xd0c,0x00000001,
+0xd10,0xa0633333,
+0xd14,0x33333c63,
+0xd18,0x6a8f5b6b,
+0xd1c,0x00000000,
+0xd20,0x00000000,
+0xd24,0x00000000,
+0xd28,0x00000000,
+0xd2c,0xcc979975,
+0xd30,0x00000000,
+0xd34,0x00000000,
+0xd38,0x00000000,
+0xd3c,0x00027293,
+0xd40,0x00000000,
+0xd44,0x00000000,
+0xd48,0x00000000,
+0xd50,0x6437140a,
+0xd54,0x024dbd02,
+0xd58,0x00000000,
+0xd5c,0x30032064,
+0xd60,0x4653de68,
+0xd64,0x00518a3c,
+0xd68,0x00002101,
+0xf14,0x00000003,
+0xf4c,0x00000000,
+0xf00,0x00000300,
+};
+
+u32 Rtl8192SUPHY_REG_1T2RArray[PHY_REG_1T2RArrayLength] = {
+0x0, };
+
+u32 Rtl8192SUPHY_ChangeTo_1T1RArray[PHY_ChangeTo_1T1RArrayLength] = {
+0x844,0xffffffff,0x00010000,
+0x804,0x0000000f,0x00000001,
+0x824,0x00f0000f,0x00300004,
+0x82c,0x00f0000f,0x00100002,
+0x870,0x04000000,0x00000001,
+0x864,0x00000400,0x00000000,
+0x878,0x000f000f,0x00000002,
+0xe74,0x0f000000,0x00000002,
+0xe78,0x0f000000,0x00000002,
+0xe7c,0x0f000000,0x00000002,
+0xe80,0x0f000000,0x00000002,
+0x90c,0x000000ff,0x00000011,
+0xc04,0x000000ff,0x00000011,
+0xd04,0x0000000f,0x00000001,
+0x1f4,0xffff0000,0x00007777,
+0x234,0xf8000000,0x0000000a,
+};
+
+u32 Rtl8192SUPHY_ChangeTo_1T2RArray[PHY_ChangeTo_1T2RArrayLength] = {
+0x804,0x0000000f,0x00000003,
+0x824,0x00f0000f,0x00300004,
+0x82c,0x00f0000f,0x00300002,
+0x870,0x04000000,0x00000001,
+0x864,0x00000400,0x00000000,
+0x878,0x000f000f,0x00000002,
+0xe74,0x0f000000,0x00000002,
+0xe78,0x0f000000,0x00000002,
+0xe7c,0x0f000000,0x00000002,
+0xe80,0x0f000000,0x00000002,
+0x90c,0x000000ff,0x00000011,
+0xc04,0x000000ff,0x00000033,
+0xd04,0x0000000f,0x00000003,
+0x1f4,0xffff0000,0x00007777,
+0x234,0xf8000000,0x0000000a,
+};
+
+u32 Rtl8192SUPHY_ChangeTo_2T2RArray[PHY_ChangeTo_2T2RArrayLength] = {
+0x804,0x0000000f,0x00000003,
+0x824,0x00f0000f,0x00300004,
+0x82c,0x00f0000f,0x00300004,
+0x870,0x04000000,0x00000001,
+0x864,0x00000400,0x00000001,
+0x878,0x000f000f,0x00020002,
+0xe74,0x0f000000,0x00000006,
+0xe78,0x0f000000,0x00000006,
+0xe7c,0x0f000000,0x00000006,
+0xe80,0x0f000000,0x00000006,
+0x90c,0x000000ff,0x00000033,
+0xc04,0x000000ff,0x00000033,
+0xd04,0x0000000f,0x00000003,
+0x1f4,0xffff0000,0x0000ffff,
+0x234,0xf8000000,0x00000013,
+};
+
+u32 Rtl8192SUPHY_REG_Array_PG[PHY_REG_Array_PGLength] = {
+0xe00,0xffffffff,0x06090909,
+0xe04,0xffffffff,0x00030406,
+0xe08,0x0000ff00,0x00000000,
+0xe10,0xffffffff,0x0a0c0d0e,
+0xe14,0xffffffff,0x04070809,
+0xe18,0xffffffff,0x0a0c0d0e,
+0xe1c,0xffffffff,0x04070809,
+};
+
+u32 Rtl8192SURadioA_1T_Array[RadioA_1T_ArrayLength] = {
+0x000,0x00030159,
+0x001,0x00030250,
+0x002,0x00010000,
+0x010,0x0008000f,
+0x011,0x000231fc,
+0x010,0x000c000f,
+0x011,0x0003f9f8,
+0x010,0x0002000f,
+0x011,0x00020101,
+0x014,0x0001093e,
+0x014,0x0009093e,
+0x015,0x000198f4,
+0x017,0x000f6500,
+0x01a,0x00013056,
+0x01b,0x00060000,
+0x01c,0x00000300,
+0x01e,0x00031059,
+0x021,0x00054000,
+0x022,0x0000083c,
+0x023,0x00001558,
+0x024,0x00000060,
+0x025,0x00022583,
+0x026,0x0000f200,
+0x027,0x000eacf1,
+0x028,0x0009bd54,
+0x029,0x00004582,
+0x02a,0x00000001,
+0x02b,0x00021334,
+0x02a,0x00000000,
+0x02b,0x0000000a,
+0x02a,0x00000001,
+0x02b,0x00000808,
+0x02b,0x00053333,
+0x02c,0x0000000c,
+0x02a,0x00000002,
+0x02b,0x00000808,
+0x02b,0x0005b333,
+0x02c,0x0000000d,
+0x02a,0x00000003,
+0x02b,0x00000808,
+0x02b,0x00063333,
+0x02c,0x0000000d,
+0x02a,0x00000004,
+0x02b,0x00000808,
+0x02b,0x0006b333,
+0x02c,0x0000000d,
+0x02a,0x00000005,
+0x02b,0x00000709,
+0x02b,0x00053333,
+0x02c,0x0000000d,
+0x02a,0x00000006,
+0x02b,0x00000709,
+0x02b,0x0005b333,
+0x02c,0x0000000d,
+0x02a,0x00000007,
+0x02b,0x00000709,
+0x02b,0x00063333,
+0x02c,0x0000000d,
+0x02a,0x00000008,
+0x02b,0x00000709,
+0x02b,0x0006b333,
+0x02c,0x0000000d,
+0x02a,0x00000009,
+0x02b,0x0000060a,
+0x02b,0x00053333,
+0x02c,0x0000000d,
+0x02a,0x0000000a,
+0x02b,0x0000060a,
+0x02b,0x0005b333,
+0x02c,0x0000000d,
+0x02a,0x0000000b,
+0x02b,0x0000060a,
+0x02b,0x00063333,
+0x02c,0x0000000d,
+0x02a,0x0000000c,
+0x02b,0x0000060a,
+0x02b,0x0006b333,
+0x02c,0x0000000d,
+0x02a,0x0000000d,
+0x02b,0x0000050b,
+0x02b,0x00053333,
+0x02c,0x0000000d,
+0x02a,0x0000000e,
+0x02b,0x0000050b,
+0x02b,0x00066623,
+0x02c,0x0000001a,
+0x02a,0x000e4000,
+0x030,0x00020000,
+0x031,0x000b9631,
+0x032,0x0000130d,
+0x033,0x00000187,
+0x013,0x00019e6c,
+0x013,0x00015e94,
+0x000,0x00010159,
+0x018,0x0000f401,
+0x0fe,0x00000000,
+0x01e,0x0003105b,
+0x0fe,0x00000000,
+0x000,0x00030159,
+0x010,0x0004000f,
+0x011,0x000203f9,
+};
+
+u32 Rtl8192SURadioB_Array[RadioB_ArrayLength] = {
+0x000,0x00030159,
+0x001,0x00001041,
+0x002,0x00011000,
+0x005,0x00080fc0,
+0x007,0x000fc803,
+0x013,0x00017cb0,
+0x013,0x00011cc0,
+0x013,0x0000dc60,
+0x013,0x00008c60,
+0x013,0x00004450,
+0x013,0x00000020,
+};
+
+u32 Rtl8192SURadioA_to1T_Array[RadioA_to1T_ArrayLength] = {
+0x000,0x00000000,
+};
+
+u32 Rtl8192SURadioA_to2T_Array[RadioA_to2T_ArrayLength] = {
+0x000,0x00000000,
+};
+
+u32 Rtl8192SURadioB_GM_Array[RadioB_GM_ArrayLength] = {
+0x000,0x00030159,
+0x001,0x00001041,
+0x002,0x00011000,
+0x005,0x00080fc0,
+0x007,0x000fc803,
+0x013,0x0000bef0,
+0x013,0x00007e90,
+0x013,0x00003e30,
+};
+
+u32 Rtl8192SUMAC_2T_Array[MAC_2T_ArrayLength] = {
+0x020,0x00000035,
+0x048,0x0000000e,
+0x049,0x000000f0,
+0x04a,0x00000077,
+0x04b,0x00000083,
+0x0b5,0x00000021,
+0x0dc,0x000000ff,
+0x0dd,0x000000ff,
+0x0de,0x000000ff,
+0x0df,0x000000ff,
+0x116,0x00000000,
+0x117,0x00000000,
+0x118,0x00000000,
+0x119,0x00000000,
+0x11a,0x00000000,
+0x11b,0x00000000,
+0x11c,0x00000000,
+0x11d,0x00000000,
+0x160,0x0000000b,
+0x161,0x0000000b,
+0x162,0x0000000b,
+0x163,0x0000000b,
+0x164,0x0000000b,
+0x165,0x0000000b,
+0x166,0x0000000b,
+0x167,0x0000000b,
+0x168,0x0000000b,
+0x169,0x0000000b,
+0x16a,0x0000000b,
+0x16b,0x0000000b,
+0x16c,0x0000000b,
+0x16d,0x0000000b,
+0x16e,0x0000000b,
+0x16f,0x0000000b,
+0x170,0x0000000b,
+0x171,0x0000000b,
+0x172,0x0000000b,
+0x173,0x0000000b,
+0x174,0x0000000b,
+0x175,0x0000000b,
+0x176,0x0000000b,
+0x177,0x0000000b,
+0x178,0x0000000b,
+0x179,0x0000000b,
+0x17a,0x0000000b,
+0x17b,0x0000000b,
+0x17c,0x0000000b,
+0x17d,0x0000000b,
+0x17e,0x0000000b,
+0x17f,0x0000000b,
+0x236,0x0000000c,
+0x503,0x00000022,
+0x560,0x00000009,
+};
+
+u32 Rtl8192SUMACPHY_Array_PG[MACPHY_Array_PGLength] = {
+0x0, };
+
+u32 Rtl8192SUAGCTAB_Array[AGCTAB_ArrayLength] = {
+0xc78,0x7f000001,
+0xc78,0x7f010001,
+0xc78,0x7e020001,
+0xc78,0x7d030001,
+0xc78,0x7c040001,
+0xc78,0x7b050001,
+0xc78,0x7a060001,
+0xc78,0x79070001,
+0xc78,0x78080001,
+0xc78,0x77090001,
+0xc78,0x760a0001,
+0xc78,0x750b0001,
+0xc78,0x740c0001,
+0xc78,0x730d0001,
+0xc78,0x720e0001,
+0xc78,0x710f0001,
+0xc78,0x70100001,
+0xc78,0x6f110001,
+0xc78,0x6f120001,
+0xc78,0x6e130001,
+0xc78,0x6d140001,
+0xc78,0x6d150001,
+0xc78,0x6c160001,
+0xc78,0x6b170001,
+0xc78,0x6a180001,
+0xc78,0x6a190001,
+0xc78,0x691a0001,
+0xc78,0x681b0001,
+0xc78,0x671c0001,
+0xc78,0x661d0001,
+0xc78,0x651e0001,
+0xc78,0x641f0001,
+0xc78,0x63200001,
+0xc78,0x4c210001,
+0xc78,0x4b220001,
+0xc78,0x4a230001,
+0xc78,0x49240001,
+0xc78,0x48250001,
+0xc78,0x47260001,
+0xc78,0x46270001,
+0xc78,0x45280001,
+0xc78,0x44290001,
+0xc78,0x2c2a0001,
+0xc78,0x2b2b0001,
+0xc78,0x2a2c0001,
+0xc78,0x292d0001,
+0xc78,0x282e0001,
+0xc78,0x272f0001,
+0xc78,0x26300001,
+0xc78,0x25310001,
+0xc78,0x24320001,
+0xc78,0x23330001,
+0xc78,0x22340001,
+0xc78,0x09350001,
+0xc78,0x08360001,
+0xc78,0x07370001,
+0xc78,0x06380001,
+0xc78,0x05390001,
+0xc78,0x043a0001,
+0xc78,0x033b0001,
+0xc78,0x023c0001,
+0xc78,0x013d0001,
+0xc78,0x003e0001,
+0xc78,0x003f0001,
+0xc78,0x7f400001,
+0xc78,0x7f410001,
+0xc78,0x7e420001,
+0xc78,0x7d430001,
+0xc78,0x7c440001,
+0xc78,0x7b450001,
+0xc78,0x7a460001,
+0xc78,0x79470001,
+0xc78,0x78480001,
+0xc78,0x77490001,
+0xc78,0x764a0001,
+0xc78,0x754b0001,
+0xc78,0x744c0001,
+0xc78,0x734d0001,
+0xc78,0x724e0001,
+0xc78,0x714f0001,
+0xc78,0x70500001,
+0xc78,0x6f510001,
+0xc78,0x6f520001,
+0xc78,0x6e530001,
+0xc78,0x6d540001,
+0xc78,0x6d550001,
+0xc78,0x6c560001,
+0xc78,0x6b570001,
+0xc78,0x6a580001,
+0xc78,0x6a590001,
+0xc78,0x695a0001,
+0xc78,0x685b0001,
+0xc78,0x675c0001,
+0xc78,0x665d0001,
+0xc78,0x655e0001,
+0xc78,0x645f0001,
+0xc78,0x63600001,
+0xc78,0x4c610001,
+0xc78,0x4b620001,
+0xc78,0x4a630001,
+0xc78,0x49640001,
+0xc78,0x48650001,
+0xc78,0x47660001,
+0xc78,0x46670001,
+0xc78,0x45680001,
+0xc78,0x44690001,
+0xc78,0x2c6a0001,
+0xc78,0x2b6b0001,
+0xc78,0x2a6c0001,
+0xc78,0x296d0001,
+0xc78,0x286e0001,
+0xc78,0x276f0001,
+0xc78,0x26700001,
+0xc78,0x25710001,
+0xc78,0x24720001,
+0xc78,0x23730001,
+0xc78,0x22740001,
+0xc78,0x09750001,
+0xc78,0x08760001,
+0xc78,0x07770001,
+0xc78,0x06780001,
+0xc78,0x05790001,
+0xc78,0x047a0001,
+0xc78,0x037b0001,
+0xc78,0x027c0001,
+0xc78,0x017d0001,
+0xc78,0x007e0001,
+0xc78,0x007f0001,
+0xc78,0x3000001e,
+0xc78,0x3001001e,
+0xc78,0x3002001e,
+0xc78,0x3003001e,
+0xc78,0x3004001e,
+0xc78,0x3405001e,
+0xc78,0x3806001e,
+0xc78,0x3e07001e,
+0xc78,0x3e08001e,
+0xc78,0x4409001e,
+0xc78,0x460a001e,
+0xc78,0x480b001e,
+0xc78,0x480c001e,
+0xc78,0x4e0d001e,
+0xc78,0x560e001e,
+0xc78,0x5a0f001e,
+0xc78,0x5e10001e,
+0xc78,0x6211001e,
+0xc78,0x6c12001e,
+0xc78,0x7213001e,
+0xc78,0x7214001e,
+0xc78,0x7215001e,
+0xc78,0x7216001e,
+0xc78,0x7217001e,
+0xc78,0x7218001e,
+0xc78,0x7219001e,
+0xc78,0x721a001e,
+0xc78,0x721b001e,
+0xc78,0x721c001e,
+0xc78,0x721d001e,
+0xc78,0x721e001e,
+0xc78,0x721f001e,
+};
+
diff --git a/drivers/staging/rtl8192su/r8192SU_HWImg.h b/drivers/staging/rtl8192su/r8192SU_HWImg.h
new file mode 100644
index 00000000000..96b15252ea8
--- /dev/null
+++ b/drivers/staging/rtl8192su/r8192SU_HWImg.h
@@ -0,0 +1,44 @@
+#ifndef __INC_HAL8192SU_FW_IMG_H
+#define __INC_HAL8192SU_FW_IMG_H
+
+#include <linux/types.h>
+
+/*Created on  2009/ 3/ 6,  5:29*/
+
+#define ImgArrayLength 68368
+extern u8 Rtl8192SUFwImgArray[ImgArrayLength];
+#define MainArrayLength 1
+extern u8 Rtl8192SUFwMainArray[MainArrayLength];
+#define DataArrayLength 1
+extern u8 Rtl8192SUFwDataArray[DataArrayLength];
+#define PHY_REG_2T2RArrayLength 372
+extern u32 Rtl8192SUPHY_REG_2T2RArray[PHY_REG_2T2RArrayLength];
+#define PHY_REG_1T2RArrayLength 1
+extern u32 Rtl8192SUPHY_REG_1T2RArray[PHY_REG_1T2RArrayLength];
+#define PHY_ChangeTo_1T1RArrayLength 48
+extern u32 Rtl8192SUPHY_ChangeTo_1T1RArray[PHY_ChangeTo_1T1RArrayLength];
+#define PHY_ChangeTo_1T2RArrayLength 45
+extern u32 Rtl8192SUPHY_ChangeTo_1T2RArray[PHY_ChangeTo_1T2RArrayLength];
+#define PHY_ChangeTo_2T2RArrayLength 45
+extern u32 Rtl8192SUPHY_ChangeTo_2T2RArray[PHY_ChangeTo_2T2RArrayLength];
+#define PHY_REG_Array_PGLength 21
+extern u32 Rtl8192SUPHY_REG_Array_PG[PHY_REG_Array_PGLength];
+#define RadioA_1T_ArrayLength 202
+extern u32 Rtl8192SURadioA_1T_Array[RadioA_1T_ArrayLength];
+#define RadioB_ArrayLength 22
+extern u32 Rtl8192SURadioB_Array[RadioB_ArrayLength];
+#define RadioA_to1T_ArrayLength 2
+extern u32 Rtl8192SURadioA_to1T_Array[RadioA_to1T_ArrayLength];
+#define RadioA_to2T_ArrayLength 2
+extern u32 Rtl8192SURadioA_to2T_Array[RadioA_to2T_ArrayLength];
+#define RadioB_GM_ArrayLength 16
+extern u32 Rtl8192SURadioB_GM_Array[RadioB_GM_ArrayLength];
+#define MAC_2T_ArrayLength 106
+extern u32 Rtl8192SUMAC_2T_Array[MAC_2T_ArrayLength];
+#define MACPHY_Array_PGLength 1
+extern u32 Rtl8192SUMACPHY_Array_PG[MACPHY_Array_PGLength];
+#define AGCTAB_ArrayLength 320
+extern u32 Rtl8192SUAGCTAB_Array[AGCTAB_ArrayLength];
+
+#endif //__INC_HAL8192SU_FW_IMG_H
+
diff --git a/drivers/staging/rtl8192su/r8192S_Efuse.c b/drivers/staging/rtl8192su/r8192S_Efuse.c
new file mode 100644
index 00000000000..394ab967435
--- /dev/null
+++ b/drivers/staging/rtl8192su/r8192S_Efuse.c
@@ -0,0 +1,2442 @@
+/******************************************************************************
+ *
+ *     (c) Copyright  2008, RealTEK Technologies Inc. All Rights Reserved.
+ *
+ * Module:	Efuse.c	( Source C File)
+ *
+ * Note:		Copy from WMAC for the first version!!!!
+ *
+ *
+ * Function:
+ *
+ * Export:
+ *
+ * Abbrev:
+ *
+ * History:
+ * Data			Who		Remark
+ *
+ * 09/23/2008	MHC		Porting Efuse R/W API from WMAC.
+ * 11/10/2008	MHC		1. Porting from 8712 EFUSE.
+ *						2. Add description and reorganize code arch.
+ * 11/16/2008 	MHC		1. Reorganize code architecture.
+ *						2. Rename for some API and change extern or static type.
+ *
+******************************************************************************/
+#include "r8192U.h"
+#include "r8192S_hw.h"
+#include "r8192S_phy.h"
+#include "r8192S_phyreg.h"
+#include "r8192S_Efuse.h"
+
+#include <linux/types.h>
+
+//typedef  int	INT32;
+//
+// In the future, we will always support EFUSE!!
+//
+#ifdef RTL8192SU
+/*---------------------------Define Local Constant---------------------------*/
+#define 	_POWERON_DELAY_
+#define 	_PRE_EXECUTE_READ_CMD_
+
+#define		EFUSE_REPEAT_THRESHOLD_		3
+#define		EFUSE_ERROE_HANDLE		1
+
+
+// From 8712!!!!!
+typedef struct _EFUSE_MAP_A{
+	u8 offset;		//0~15
+	u8 word_start;	//0~3
+	u8 byte_start;	//0 or 1
+	u8 byte_cnts;
+
+}EFUSE_MAP, *PEFUSE_MAP;
+
+typedef struct PG_PKT_STRUCT_A{
+	u8 offset;
+	u8 word_en;
+	u8 data[8];
+}PGPKT_STRUCT,*PPGPKT_STRUCT;
+
+typedef enum _EFUSE_DATA_ITEM{
+	EFUSE_CHIP_ID=0,
+	EFUSE_LDO_SETTING,
+	EFUSE_CLK_SETTING,
+	EFUSE_SDIO_SETTING,
+	EFUSE_CCCR,
+	EFUSE_SDIO_MODE,
+	EFUSE_OCR,
+	EFUSE_F0CIS,
+	EFUSE_F1CIS,
+	EFUSE_MAC_ADDR,
+	EFUSE_EEPROM_VER,
+	EFUSE_CHAN_PLAN,
+	EFUSE_TXPW_TAB
+} EFUSE_DATA_ITEM;
+
+struct efuse_priv
+{
+	u8		id[2];
+	u8		ldo_setting[2];
+	u8		clk_setting[2];
+	u8		cccr;
+	u8		sdio_mode;
+	u8		ocr[3];
+	u8		cis0[17];
+	u8		cis1[48];
+	u8		mac_addr[6];
+	u8		eeprom_verno;
+	u8		channel_plan;
+	u8		tx_power_b[14];
+	u8		tx_power_g[14];
+};
+
+/*---------------------------Define Local Constant---------------------------*/
+
+
+/*------------------------Define global variable-----------------------------*/
+const u8 MAX_PGPKT_SIZE = 9; //header+ 2* 4 words (BYTES)
+const u8 PGPKT_DATA_SIZE = 8; //BYTES sizeof(u8)*8
+const u32 EFUSE_MAX_SIZE = 512;
+
+
+const EFUSE_MAP RTL8712_SDIO_EFUSE_TABLE[]={
+				//offset	word_s	byte_start	byte_cnts
+/*ID*/			{0		,0		,0			,2	}, // 00~01h
+/*LDO Setting*/	{0		,1		,0			,2	}, // 02~03h
+/*CLK Setting*/	{0		,2		,0			,2	}, // 04~05h
+/*SDIO Setting*/	{1		,0		,0			,1	}, // 08h
+/*CCCR*/		{1		,0		,1			,1	}, // 09h
+/*SDIO MODE*/	{1		,1		,0			,1	}, // 0Ah
+/*OCR*/			{1		,1		,1			,3	}, // 0B~0Dh
+/*CCIS*/			{1		,3		,0			,17	}, // 0E~1Eh  2...1
+/*F1CIS*/		{3		,3		,1			,48	}, // 1F~4Eh  6...0
+/*MAC Addr*/		{10		,0		,0			,6	}, // 50~55h
+/*EEPROM ver*/	{10		,3		,0			,1	}, // 56h
+/*Channel plan*/	{10		,3		,1			,1	}, // 57h
+/*TxPwIndex */	{11		,0		,0			,28	}  // 58~73h  3...4
+};
+
+/*------------------------Define global variable-----------------------------*/
+
+
+/*------------------------Define local variable------------------------------*/
+
+/*------------------------Define local variable------------------------------*/
+
+
+/*--------------------Define function prototype-----------------------*/
+//
+// From WMAC Efuse one byte R/W
+//
+extern	void
+EFUSE_Initialize(struct net_device* dev);
+extern	u8
+EFUSE_Read1Byte(struct net_device* dev, u16 Address);
+extern	void
+EFUSE_Write1Byte(struct net_device* dev, u16 Address,u8 Value);
+
+//
+// Efuse Shadow Area operation
+//
+static	void
+efuse_ShadowRead1Byte(struct net_device* dev,u16 Offset,u8 *Value);
+static	void
+efuse_ShadowRead2Byte(struct net_device* dev,	u16 Offset,u16 *Value	);
+static	void
+efuse_ShadowRead4Byte(struct net_device* dev,	u16 Offset,u32 *Value	);
+static	void
+efuse_ShadowWrite1Byte(struct net_device* dev,	u16 Offset, u8 Value);
+static	void
+efuse_ShadowWrite2Byte(struct net_device* dev,	u16 Offset,u16 Value);
+static	void
+efuse_ShadowWrite4Byte(struct net_device* dev,	u16 Offset,u32 Value);
+
+//
+// Real Efuse operation
+//
+static	u8
+efuse_OneByteRead(struct net_device* dev,u16 addr,u8 *data);
+static	u8
+efuse_OneByteWrite(struct net_device* dev,u16 addr, u8 data);
+
+//
+// HW setting map file operation
+//
+static	void
+efuse_ReadAllMap(struct net_device* dev,u8 *Efuse);
+#ifdef TO_DO_LIST
+static	void
+efuse_WriteAllMap(struct net_device* dev,u8 *eeprom,u32 eeprom_size);
+static	bool
+efuse_ParsingMap(char* szStr,u32* pu4bVal,u32* pu4bMove);
+#endif
+//
+// Reald Efuse R/W or other operation API.
+//
+static	u8
+efuse_PgPacketRead(	struct net_device* dev,u8	offset,u8 *data);
+static	u8
+efuse_PgPacketWrite(struct net_device* dev,u8 offset,u8 word_en,u8	*data);
+static	void
+efuse_WordEnableDataRead(	u8 word_en,u8 *sourdata,u8 *targetdata);
+static	u8
+efuse_WordEnableDataWrite(	struct net_device* dev, u16 efuse_addr, u8 word_en, u8 *data);
+static	void
+efuse_PowerSwitch(struct net_device* dev,u8 PwrState);
+static	u16
+efuse_GetCurrentSize(struct net_device* dev);
+static u8
+efuse_CalculateWordCnts(u8 word_en);
+#if 0
+static	void
+efuse_ResetLoader(struct net_device* dev);
+#endif
+//
+// API for power on power off!!!
+//
+#ifdef TO_DO_LIST
+static void efuse_reg_ctrl(struct net_device* dev, u8 bPowerOn);
+#endif
+/*--------------------Define function prototype-----------------------*/
+
+
+
+/*-----------------------------------------------------------------------------
+ * Function:	EFUSE_Initialize
+ *
+ * Overview:	Copy from WMAC fot EFUSE testing setting init.
+ *
+ * Input:       NONE
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ * When			Who		Remark
+ * 09/23/2008 	MHC		Copy from WMAC.
+ *
+ *---------------------------------------------------------------------------*/
+extern	void
+EFUSE_Initialize(struct net_device* dev)
+{
+	u8	Bytetemp = {0x00};
+	u8	temp = {0x00};
+
+	//Enable Digital Core Vdd : 0x2[13]=1
+	Bytetemp = read_nic_byte(dev, SYS_FUNC_EN+1);
+	temp = Bytetemp | 0x20;
+	write_nic_byte(dev, SYS_FUNC_EN+1, temp);
+
+	//EE loader to retention path1: attach 0x0[8]=0
+	Bytetemp = read_nic_byte(dev, SYS_ISO_CTRL+1);
+	temp = Bytetemp & 0xFE;
+	write_nic_byte(dev, SYS_ISO_CTRL+1, temp);
+
+
+	//Enable E-fuse use 2.5V LDO : 0x37[7]=1
+	Bytetemp = read_nic_byte(dev, EFUSE_TEST+3);
+	temp = Bytetemp | 0x80;
+	write_nic_byte(dev, EFUSE_TEST+3, temp);
+
+	//E-fuse clk switch from 500k to 40M : 0x2F8[1:0]=11b
+	write_nic_byte(dev, 0x2F8, 0x3);
+
+	//Set E-fuse program time & read time : 0x30[30:24]=1110010b
+	write_nic_byte(dev, EFUSE_CTRL+3, 0x72);
+
+}	/* EFUSE_Initialize */
+
+
+/*-----------------------------------------------------------------------------
+ * Function:	EFUSE_Read1Byte
+ *
+ * Overview:	Copy from WMAC fot EFUSE read 1 byte.
+ *
+ * Input:       NONE
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ * When			Who		Remark
+ * 09/23/2008 	MHC		Copy from WMAC.
+ *
+ *---------------------------------------------------------------------------*/
+extern	u8
+EFUSE_Read1Byte(struct net_device* dev, u16	Address)
+{
+	u8	data;
+	u8	Bytetemp = {0x00};
+	u8	temp = {0x00};
+	u32	k=0;
+
+	if (Address < EFUSE_MAC_LEN)	//E-fuse 512Byte
+	{
+		//Write E-fuse Register address bit0~7
+		temp = Address & 0xFF;
+		write_nic_byte(dev, EFUSE_CTRL+1, temp);
+		Bytetemp = read_nic_byte(dev, EFUSE_CTRL+2);
+		//Write E-fuse Register address bit8~9
+		temp = ((Address >> 8) & 0x03) | (Bytetemp & 0xFC);
+		write_nic_byte(dev, EFUSE_CTRL+2, temp);
+
+		//Write 0x30[31]=0
+		Bytetemp = read_nic_byte(dev, EFUSE_CTRL+3);
+		temp = Bytetemp & 0x7F;
+		write_nic_byte(dev, EFUSE_CTRL+3, temp);
+
+		//Wait Write-ready (0x30[31]=1)
+		Bytetemp = read_nic_byte(dev, EFUSE_CTRL+3);
+		while(!(Bytetemp & 0x80))
+		{
+			Bytetemp = read_nic_byte(dev, EFUSE_CTRL+3);
+			k++;
+			if(k==1000)
+			{
+				k=0;
+				break;
+			}
+		}
+		data=read_nic_byte(dev, EFUSE_CTRL);
+		return data;
+	}
+	else
+		return 0xFF;
+
+}	/* EFUSE_Read1Byte */
+
+
+/*-----------------------------------------------------------------------------
+ * Function:	EFUSE_Write1Byte
+ *
+ * Overview:	Copy from WMAC fot EFUSE write 1 byte.
+ *
+ * Input:       NONE
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ * When			Who		Remark
+ * 09/23/2008 	MHC		Copy from WMAC.
+ *
+ *---------------------------------------------------------------------------*/
+extern	void
+EFUSE_Write1Byte(struct net_device* dev, u16 Address,u8 Value)
+{
+	//u8	data;
+	u8	Bytetemp = {0x00};
+	u8	temp = {0x00};
+	u32	k=0;
+
+	//RT_TRACE(COMP_EFUSE, "Addr=%x Data =%x\n", Address, Value);
+
+	if( Address < EFUSE_MAC_LEN)	//E-fuse 512Byte
+	{
+		write_nic_byte(dev, EFUSE_CTRL, Value);
+
+		//Write E-fuse Register address bit0~7
+		temp = Address & 0xFF;
+		write_nic_byte(dev, EFUSE_CTRL+1, temp);
+		Bytetemp = read_nic_byte(dev, EFUSE_CTRL+2);
+
+		//Write E-fuse Register address bit8~9
+		temp = ((Address >> 8) & 0x03) | (Bytetemp & 0xFC);
+		write_nic_byte(dev, EFUSE_CTRL+2, temp);
+
+		//Write 0x30[31]=1
+		Bytetemp = read_nic_byte(dev, EFUSE_CTRL+3);
+		temp = Bytetemp | 0x80;
+		write_nic_byte(dev, EFUSE_CTRL+3, temp);
+
+		//Wait Write-ready (0x30[31]=0)
+		Bytetemp = read_nic_byte(dev, EFUSE_CTRL+3);
+		while(Bytetemp & 0x80)
+		{
+			Bytetemp = read_nic_byte(dev, EFUSE_CTRL+3);
+			k++;
+			if(k==100)
+			{
+				k=0;
+				break;
+			}
+		}
+	}
+
+}	/* EFUSE_Write1Byte */
+
+
+#ifdef EFUSE_FOR_92SU
+//
+//	Description:
+//		1. Process CR93C46 Data polling cycle.
+//		2. Refered from SD1 Richard.
+//
+//	Assumption:
+//		1. Boot from E-Fuse and successfully auto-load.
+//		2. PASSIVE_LEVEL (USB interface)
+//
+//	Created by Roger, 2008.10.21.
+//
+void do_93c46(struct net_device* dev,  u8 addorvalue)
+{
+    	//u8  clear[1] = {0x0};      // cs=0 , sk=0 , di=0 , do=0
+	u8  cs[1] = {0x88};        // cs=1 , sk=0 , di=0 , do=0
+	u8  cssk[1] = {0x8c};      // cs=1 , sk=1 , di=0 , do=0
+	u8  csdi[1] = {0x8a};      // cs=1 , sk=0 , di=1 , do=0
+    	u8  csskdi[1] = {0x8e};    // cs=1 , sk=1 , di=1 , do=0
+	//u8  di[1] = {0x82};        // cs=0 , sk=0 , di=1 , do=0
+    	u8  count;
+
+    	for(count=0 ; count<8 ; count++)
+	{
+		if((addorvalue&0x80)!=0)
+		{
+			write_nic_byte(dev, EPROM_CMD, csdi[0]);
+			write_nic_byte(dev, EPROM_CMD, csskdi[0]);
+		}
+		else
+		{
+			write_nic_byte(dev, EPROM_CMD, cs[0]);
+			write_nic_byte(dev, EPROM_CMD, cssk[0]);
+		}
+		addorvalue = addorvalue << 1;
+	}
+}
+
+
+//
+//	Description:
+//		Process CR93C46 Data read polling cycle.
+//		Refered from SD1 Richard.
+//
+//	Assumption:
+//		1. Boot from E-Fuse and successfully auto-load.
+//		2. PASSIVE_LEVEL (USB interface)
+//
+//	Created by Roger, 2008.10.21.
+//
+u16 Read93C46(struct net_device*	dev,	u16	Reg	)
+{
+
+   	u8  	clear[1] = {0x0};      // cs=0 , sk=0 , di=0 , do=0
+	u8  	cs[1] = {0x88};        // cs=1 , sk=0 , di=0 , do=0
+	u8  	cssk[1] = {0x8c};      // cs=1 , sk=1 , di=0 , do=0
+	u8  	csdi[1] = {0x8a};      // cs=1 , sk=0 , di=1 , do=0
+   	u8  	csskdi[1] = {0x8e};    // cs=1 , sk=1 , di=1 , do=0
+	//u8  	di[1] = {0x82};        // cs=0 , sk=0 , di=1 , do=0
+	u8  	EepromSEL[1]={0x00};
+	u8  	address;
+
+	u16   	storedataF[1] = {0x0};   //93c46 data packet for 16bits
+	u8   	t,data[1],storedata[1];
+
+
+	address = (u8)Reg;
+
+	// Suggested by SD1 Alex, 2008.10.20. Revised by Roger.
+	*EepromSEL= read_nic_byte(dev, EPROM_CMD);
+
+	if((*EepromSEL & 0x10) == 0x10) // select 93c46
+	{
+		address = address | 0x80;
+
+		write_nic_byte(dev, EPROM_CMD, csdi[0]);
+		write_nic_byte(dev, EPROM_CMD, csskdi[0]);
+   		do_93c46(dev, address);
+	}
+
+
+	for(t=0 ; t<16 ; t++)      //if read 93c46 , t=16
+	{
+		write_nic_byte(dev, EPROM_CMD, cs[0]);
+		write_nic_byte(dev, EPROM_CMD, cssk[0]);
+		*data= read_nic_byte(dev, EPROM_CMD);
+
+		if(*data & 0x8d) //original code
+		{
+			*data = *data & 0x01;
+			*storedata = *data;
+		}
+		else
+		{
+			*data = *data & 0x01 ;
+			*storedata = *data;
+		}
+		*storedataF = (*storedataF << 1 ) + *storedata;
+	}
+	write_nic_byte(dev, EPROM_CMD, cs[0]);
+	write_nic_byte(dev, EPROM_CMD, clear[0]);
+
+	return *storedataF;
+}
+
+
+//
+//	Description:
+//		Execute E-Fuse read byte operation.
+//		Refered from SD1 Richard.
+//
+//	Assumption:
+//		1. Boot from E-Fuse and successfully auto-load.
+//		2. PASSIVE_LEVEL (USB interface)
+//
+//	Created by Roger, 2008.10.21.
+//
+void
+ReadEFuseByte(struct net_device* dev,u16 _offset, u8 *pbuf)
+{
+
+	//u16 	indexk=0;
+	u32  value32;
+	u8 	readbyte;
+	u16 	retry;
+
+
+	//Write Address
+	write_nic_byte(dev, EFUSE_CTRL+1, (_offset & 0xff));
+	readbyte = read_nic_byte(dev, EFUSE_CTRL+2);
+	write_nic_byte(dev, EFUSE_CTRL+2, ((_offset >> 8) & 0x03) | (readbyte & 0xfc));
+
+	//Write bit 32 0
+	readbyte = read_nic_byte(dev, EFUSE_CTRL+3);
+	write_nic_byte(dev, EFUSE_CTRL+3, (readbyte & 0x7f));
+
+	//Check bit 32 read-ready
+	retry = 0;
+	value32 = read_nic_dword(dev, EFUSE_CTRL);
+	//while(!(((value32 >> 24) & 0xff) & 0x80)  && (retry<10))
+	while(!(((value32 >> 24) & 0xff) & 0x80)  && (retry<10000))
+	{
+		value32 = read_nic_dword(dev, EFUSE_CTRL);
+		retry++;
+	}
+	*pbuf = (u8)(value32 & 0xff);
+}
+
+
+#define		EFUSE_READ_SWITCH		1
+//
+//	Description:
+//		1. Execute E-Fuse read byte operation according as map offset and
+//		    save to E-Fuse table.
+//		2. Refered from SD1 Richard.
+//
+//	Assumption:
+//		1. Boot from E-Fuse and successfully auto-load.
+//		2. PASSIVE_LEVEL (USB interface)
+//
+//	Created by Roger, 2008.10.21.
+//
+void
+ReadEFuse(struct net_device* dev, u16	 _offset, u16 _size_byte, u8 *pbuf)
+{
+
+	u8  	efuseTbl[128];
+	u8  	rtemp8[1];
+	u16 	eFuse_Addr = 0;
+	u8  	offset, wren;
+	u16  	i, j;
+	u16 	eFuseWord[16][4];// = {0xFF};//FIXLZM
+
+	for(i=0; i<16; i++)
+		for(j=0; j<4; j++)
+			eFuseWord[i][j]=0xFF;
+
+	// Do NOT excess total size of EFuse table. Added by Roger, 2008.11.10.
+	if((_offset + _size_byte)>128)
+	{// total E-Fuse table is 128bytes
+		//RT_TRACE(COMP_EFUSE, "ReadEFuse(): Invalid offset(%#x) with read bytes(%#x)!!\n",_offset, _size_byte);
+		printk("ReadEFuse(): Invalid offset with read bytes!!\n");
+		return;
+	}
+
+	// Refresh efuse init map as all oxFF.
+	for (i = 0; i < 128; i++)
+		efuseTbl[i] = 0xFF;
+
+#if (EFUSE_READ_SWITCH == 1)
+	ReadEFuseByte(dev, eFuse_Addr, rtemp8);
+#else
+	rtemp8[0] = EFUSE_Read1Byte(dev, eFuse_Addr);
+#endif
+	if(*rtemp8 != 0xFF)		eFuse_Addr++;
+	while((*rtemp8 != 0xFF) && (eFuse_Addr < 512)){
+		offset = ((*rtemp8 >> 4) & 0x0f);
+		if(offset <= 0x0F){
+			wren = (*rtemp8 & 0x0f);
+			for(i=0; i<4; i++){
+				if(!(wren & 0x01)){
+#if (EFUSE_READ_SWITCH == 1)
+					ReadEFuseByte(dev, eFuse_Addr, rtemp8);	eFuse_Addr++;
+#else
+					rtemp8[0] = EFUSE_Read1Byte(dev, eFuse_Addr);	eFuse_Addr++;
+#endif
+					eFuseWord[offset][i] = (*rtemp8 & 0xff);
+					if(eFuse_Addr >= 512) break;
+#if (EFUSE_READ_SWITCH == 1)
+					ReadEFuseByte(dev, eFuse_Addr, rtemp8);	eFuse_Addr++;
+#else
+					rtemp8[0] = EFUSE_Read1Byte(dev, eFuse_Addr);	eFuse_Addr++;
+#endif
+					eFuseWord[offset][i] |= (((u16)*rtemp8 << 8) & 0xff00);
+					if(eFuse_Addr >= 512) break;
+				}
+				wren >>= 1;
+			}
+		}
+#if (EFUSE_READ_SWITCH == 1)
+		ReadEFuseByte(dev, eFuse_Addr, rtemp8);
+#else
+		rtemp8[0] = EFUSE_Read1Byte(dev, eFuse_Addr);	eFuse_Addr++;
+#endif
+		if(*rtemp8 != 0xFF && (eFuse_Addr < 512))	eFuse_Addr++;
+	}
+
+	for(i=0; i<16; i++){
+		for(j=0; j<4; j++){
+			efuseTbl[(i*8)+(j*2)]=(eFuseWord[i][j] & 0xff);
+			efuseTbl[(i*8)+((j*2)+1)]=((eFuseWord[i][j] >> 8) & 0xff);
+		}
+	}
+	for(i=0; i<_size_byte; i++)
+		pbuf[i] = efuseTbl[_offset+i];
+}
+#endif	// #if (EFUSE_FOR_92SU == 1)
+
+
+/*-----------------------------------------------------------------------------
+ * Function:	EFUSE_ShadowRead
+ *
+ * Overview:	Read from efuse init map !!!!!
+ *
+ * Input:       NONE
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ * When			Who		Remark
+ * 11/12/2008 	MHC		Create Version 0.
+ *
+ *---------------------------------------------------------------------------*/
+extern void
+EFUSE_ShadowRead(	struct net_device*	dev,	u8 Type, u16 Offset, u32 *Value)
+{
+	//HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
+
+	if (Type == 1)
+		efuse_ShadowRead1Byte(dev, Offset, (u8 *)Value);
+	else if (Type == 2)
+		efuse_ShadowRead2Byte(dev, Offset, (u16 *)Value);
+	else if (Type == 4)
+		efuse_ShadowRead4Byte(dev, Offset, (u32 *)Value);
+
+}	// EFUSE_ShadowRead
+
+
+/*-----------------------------------------------------------------------------
+ * Function:	EFUSE_ShadowWrite
+ *
+ * Overview:	Write efuse modify map for later update operation to use!!!!!
+ *
+ * Input:       NONE
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ * When			Who		Remark
+ * 11/12/2008 	MHC		Create Version 0.
+ *
+ *---------------------------------------------------------------------------*/
+extern	void
+EFUSE_ShadowWrite(	struct net_device*	dev,	u8 Type, u16 Offset,u32	Value)
+{
+	//HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
+
+	if (Offset >= 0x18 && Offset <= 0x1F)
+		return;
+
+	if (Type == 1)
+		efuse_ShadowWrite1Byte(dev, Offset, (u8)Value);
+	else if (Type == 2)
+		efuse_ShadowWrite2Byte(dev, Offset, (u16)Value);
+	else if (Type == 4)
+		efuse_ShadowWrite4Byte(dev, Offset, (u32)Value);
+
+}	// EFUSE_ShadowWrite
+
+
+/*-----------------------------------------------------------------------------
+ * Function:	EFUSE_ShadowUpdate
+ *
+ * Overview:	Compare init and modify map to update Efuse!!!!!
+ *
+ * Input:       NONE
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ * When			Who		Remark
+ * 11/12/2008 	MHC		Create Version 0.
+ *
+ *---------------------------------------------------------------------------*/
+extern	void
+EFUSE_ShadowUpdate(struct net_device* dev)
+{
+	//HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u16			i, offset, base = 0;
+	u8			word_en = 0x0F;
+	bool first_pg = false;
+	// For Efuse write action, we must enable LDO2.5V and 40MHZ clk.
+	efuse_PowerSwitch(dev, TRUE);
+
+	//
+	// Efuse support 16 write are with PG header packet!!!!
+	//
+	for (offset = 0; offset < 16; offset++)
+	{
+		// Offset 0x18-1F are reserved now!!!
+#ifdef RTL8192SE
+		if(priv->card_8192 == NIC_8192SE){
+			if (offset == 3)
+				continue;
+		}
+#endif
+		word_en = 0x0F;
+		base = offset * 8;
+
+		//
+		// Decide Word Enable Bit for the Efuse section
+		// One section contain 4 words = 8 bytes!!!!!
+		//
+		for (i = 0; i < 8; i++)
+		{
+			if (offset == 0 && priv->EfuseMap[EFUSE_INIT_MAP][base+i] == 0xFF)
+			{
+				first_pg = TRUE;
+			}
+
+			// 2008/12/11 MH HW autoload fail workaround for A/BCUT.
+#ifdef RTL8192SE
+			if (first_pg == TRUE && offset == 1 && (priv->card_8192 == NIC_8192SE))
+			{
+				continue;
+			}
+#endif
+
+			if (first_pg == TRUE)
+			{
+				word_en &= ~(1<<(i/2));
+				priv->EfuseMap[EFUSE_INIT_MAP][base+i] =
+				priv->EfuseMap[EFUSE_MODIFY_MAP][base+i];
+			}else
+			{
+			if (	priv->EfuseMap[EFUSE_INIT_MAP][base+i] !=
+				priv->EfuseMap[EFUSE_MODIFY_MAP][base+i])
+			{
+				word_en &= ~(EFUSE_BIT(i/2));
+				//RT_TRACE(COMP_EFUSE,  "Offset=%d Addr%x %x ==> %x Word_En=%02x\n",
+				//offset, base+i, priv->EfuseMap[0][base+i], priv->EfuseMap[1][base+i],word_en);
+
+				// Update init table!!!
+				priv->EfuseMap[EFUSE_INIT_MAP][base+i] =
+				priv->EfuseMap[EFUSE_MODIFY_MAP][base+i];
+				}
+			}
+		}
+
+		//
+		// Call Efuse real write section !!!!
+		//
+		if (word_en != 0x0F)
+		{
+			u8	tmpdata[8];
+
+			//FIXLZM
+			memcpy(tmpdata, &(priv->EfuseMap[EFUSE_MODIFY_MAP][base]), 8);
+			//RT_PRINT_DATA(COMP_INIT, DBG_LOUD, ("U-EFUSE\n"), tmpdata, 8);
+			efuse_PgPacketWrite(dev,(u8)offset,word_en,tmpdata);
+		}
+
+	}
+	// 2008/12/01 MH For Efuse HW load bug workarounf method!!!!
+	// We will force write 0x10EC into address 10&11 after all Efuse content.
+	//
+#ifdef RTL8192SE
+	if (first_pg == TRUE && (priv->card_8192 == NIC_8192SE))
+	{
+		// 2008/12/11 MH Use new method to prevent HW autoload fail.
+		u8	tmpdata[8];
+
+		memcpy(tmpdata, (&priv->EfuseMap[EFUSE_MODIFY_MAP][8]), 8);
+		efuse_PgPacketWrite(dev, 1, 0x0, tmpdata);
+#if 0
+		u1Byte	tmpdata[8] = {0xFF, 0xFF, 0xEC, 0x10, 0xFF, 0xFF, 0xFF, 0xFF};
+
+		efuse_PgPacketWrite(pAdapter, 1, 0xD, tmpdata);
+#endif
+	}
+#endif
+
+
+	// For warm reboot, we must resume Efuse clock to 500K.
+	efuse_PowerSwitch(dev, FALSE);
+	// 2008/12/01 MH We update shadow content again!!!!
+	EFUSE_ShadowMapUpdate(dev);
+
+}	// EFUSE_ShadowUpdate
+
+
+/*-----------------------------------------------------------------------------
+ * Function:	EFUSE_ShadowMapUpdate
+ *
+ * Overview:	Transfer current EFUSE content to shadow init and modify map.
+ *
+ * Input:       NONE
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ * When			Who		Remark
+ * 11/13/2008 	MHC		Create Version 0.
+ *
+ *---------------------------------------------------------------------------*/
+extern void EFUSE_ShadowMapUpdate(struct net_device* dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	if (priv->AutoloadFailFlag == true){
+		memset(&(priv->EfuseMap[EFUSE_INIT_MAP][0]), 0xff, 128);
+	}else{
+		efuse_ReadAllMap(dev, &priv->EfuseMap[EFUSE_INIT_MAP][0]);
+	}
+	//PlatformMoveMemory(&priv->EfuseMap[EFUSE_MODIFY_MAP][0],
+		//&priv->EfuseMap[EFUSE_INIT_MAP][0], HWSET_MAX_SIZE_92S);//FIXLZM
+	memcpy(&priv->EfuseMap[EFUSE_MODIFY_MAP][0],
+		&priv->EfuseMap[EFUSE_INIT_MAP][0], HWSET_MAX_SIZE_92S);
+
+}	// EFUSE_ShadowMapUpdate
+
+extern	void
+EFUSE_ForceWriteVendorId( struct net_device* dev)
+{
+	u8 tmpdata[8] = {0xFF, 0xFF, 0xEC, 0x10, 0xFF, 0xFF, 0xFF, 0xFF};
+
+	efuse_PowerSwitch(dev, TRUE);
+
+	efuse_PgPacketWrite(dev, 1, 0xD, tmpdata);
+
+	efuse_PowerSwitch(dev, FALSE);
+
+}	// EFUSE_ForceWriteVendorId
+
+/*-----------------------------------------------------------------------------
+ * Function:	efuse_ShadowRead1Byte
+ *			efuse_ShadowRead2Byte
+ *			efuse_ShadowRead4Byte
+ *
+ * Overview:	Read from efuse init map by one/two/four bytes !!!!!
+ *
+ * Input:       NONE
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ * When			Who		Remark
+ * 11/12/2008 	MHC		Create Version 0.
+ *
+ *---------------------------------------------------------------------------*/
+static	void
+efuse_ShadowRead1Byte(struct net_device*	dev,	u16 Offset,	u8 *Value)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	*Value = priv->EfuseMap[EFUSE_MODIFY_MAP][Offset];
+
+}	// EFUSE_ShadowRead1Byte
+
+//---------------Read Two Bytes
+static	void
+efuse_ShadowRead2Byte(struct net_device*	dev,	u16 Offset,	u16 *Value)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	*Value = priv->EfuseMap[EFUSE_MODIFY_MAP][Offset];
+	*Value |= priv->EfuseMap[EFUSE_MODIFY_MAP][Offset+1]<<8;
+
+}	// EFUSE_ShadowRead2Byte
+
+//---------------Read Four Bytes
+static	void
+efuse_ShadowRead4Byte(struct net_device*	dev,	u16 Offset,	u32 *Value)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	*Value = priv->EfuseMap[EFUSE_MODIFY_MAP][Offset];
+	*Value |= priv->EfuseMap[EFUSE_MODIFY_MAP][Offset+1]<<8;
+	*Value |= priv->EfuseMap[EFUSE_MODIFY_MAP][Offset+2]<<16;
+	*Value |= priv->EfuseMap[EFUSE_MODIFY_MAP][Offset+3]<<24;
+
+}	// efuse_ShadowRead4Byte
+
+
+
+/*-----------------------------------------------------------------------------
+ * Function:	efuse_ShadowWrite1Byte
+ *			efuse_ShadowWrite2Byte
+ *			efuse_ShadowWrite4Byte
+ *
+ * Overview:	Write efuse modify map by one/two/four byte.
+ *
+ * Input:       NONE
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ * When			Who		Remark
+ * 11/12/2008 	MHC		Create Version 0.
+ *
+ *---------------------------------------------------------------------------*/
+static	void
+efuse_ShadowWrite1Byte(struct net_device*	dev,	u16 Offset,	u8 Value)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	priv->EfuseMap[EFUSE_MODIFY_MAP][Offset] = Value;
+
+}	// efuse_ShadowWrite1Byte
+
+//---------------Write Two Bytes
+static	void
+efuse_ShadowWrite2Byte(struct net_device*	dev,	u16 Offset,	u16 Value)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	priv->EfuseMap[EFUSE_MODIFY_MAP][Offset] = Value&0x00FF;
+	priv->EfuseMap[EFUSE_MODIFY_MAP][Offset+1] = Value>>8;
+
+}	// efuse_ShadowWrite1Byte
+
+//---------------Write Four Bytes
+static	void
+efuse_ShadowWrite4Byte(struct net_device*	dev,	u16 Offset,	u32 Value)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	priv->EfuseMap[EFUSE_MODIFY_MAP][Offset] = (u8)(Value&0x000000FF);
+	priv->EfuseMap[EFUSE_MODIFY_MAP][Offset+1] = (u8)((Value>>8)&0x0000FF);
+	priv->EfuseMap[EFUSE_MODIFY_MAP][Offset+2] = (u8)((Value>>16)&0x00FF);
+	priv->EfuseMap[EFUSE_MODIFY_MAP][Offset+3] = (u8)((Value>>24)&0xFF);
+
+}	// efuse_ShadowWrite1Byte
+
+
+/*  11/16/2008 MH Read one byte from real Efuse. */
+static	u8
+efuse_OneByteRead(struct net_device* dev, u16 addr,u8 *data)
+{
+	u8 tmpidx = 0;
+	u8 bResult;
+
+	// -----------------e-fuse reg ctrl ---------------------------------
+	//address
+	write_nic_byte(dev, EFUSE_CTRL+1, (u8)(addr&0xff));
+	write_nic_byte(dev, EFUSE_CTRL+2, ((u8)((addr>>8) &0x03) ) |
+	(read_nic_byte(dev, EFUSE_CTRL+2)&0xFC ));
+
+	write_nic_byte(dev, EFUSE_CTRL+3,  0x72);//read cmd
+
+	while(!(0x80 &read_nic_byte(dev, EFUSE_CTRL+3))&&(tmpidx<100))
+	{
+		tmpidx++;
+	}
+	if(tmpidx<100)
+	{
+		*data=read_nic_byte(dev, EFUSE_CTRL);
+		bResult = TRUE;
+	}
+	else
+	{
+		*data = 0xff;
+		bResult = FALSE;
+	}
+	return bResult;
+}	// efuse_OneByteRead
+
+/*  11/16/2008 MH Write one byte to reald Efuse. */
+static	u8
+efuse_OneByteWrite(struct net_device* dev,  u16 addr, u8 data)
+{
+	u8 tmpidx = 0;
+	u8 bResult;
+
+	//RT_TRACE(COMP_EFUSE, "Addr = %x Data=%x\n", addr, data);
+
+	//return	0;
+
+	// -----------------e-fuse reg ctrl ---------------------------------
+	//address
+	write_nic_byte(dev, EFUSE_CTRL+1, (u8)(addr&0xff));
+	write_nic_byte(dev, EFUSE_CTRL+2,
+	read_nic_byte(dev, EFUSE_CTRL+2)|(u8)((addr>>8)&0x03) );
+
+	write_nic_byte(dev, EFUSE_CTRL, data);//data
+	write_nic_byte(dev, EFUSE_CTRL+3, 0xF2);//write cmd
+
+	while((0x80 &  read_nic_byte(dev, EFUSE_CTRL+3)) && (tmpidx<100) ){
+		tmpidx++;
+	}
+
+	if(tmpidx<100)
+	{
+		bResult = TRUE;
+	}
+	else
+	{
+		bResult = FALSE;
+	}
+
+	return bResult;
+}	// efuse_OneByteWrite
+
+
+/*-----------------------------------------------------------------------------
+ * Function:	efuse_ReadAllMap
+ *
+ * Overview:	Read All Efuse content
+ *
+ * Input:       NONE
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ * When			Who		Remark
+ * 11/11/2008 	MHC		Create Version 0.
+ *
+ *---------------------------------------------------------------------------*/
+static	void
+efuse_ReadAllMap(struct net_device*	dev, u8	*Efuse)
+{
+	//u8 	pg_data[8];
+	//u8 	offset = 0;
+	//u8 	tmpidx;
+	//static	u8	index = 0;
+
+	//
+	// We must enable clock and LDO 2.5V otherwise, read all map will be fail!!!!
+	//
+	efuse_PowerSwitch(dev, TRUE);
+	ReadEFuse(dev, 0, 128, Efuse);
+	efuse_PowerSwitch(dev, FALSE);
+#if 0
+	// ==> Prevent efuse read error!!!
+	RT_TRACE(COMP_INIT, "efuse_ResetLoader\n");
+	efuse_ResetLoader(dev);
+
+	// Change Efuse Clock for write action to 40MHZ
+	write_nic_byte(dev, EFUSE_CLK, 0x03);
+
+	ReadEFuse(dev, 0, 128, Efuse);
+
+	// Change Efuse Clock for write action to 500K
+	write_nic_byte(dev, EFUSE_CLK, 0x02);
+#if 0	// Error !!!!!!
+	for(offset = 0;offset<16;offset++)	// For 8192SE
+	{
+		PlatformFillMemory((PVOID)pg_data, 8, 0xff);
+		efuse_PgPacketRead(pAdapter,offset,pg_data);
+
+		PlatformMoveMemory((PVOID)&Efuse[offset*8], (PVOID)pg_data, 8);
+	}
+#endif
+
+	//
+	// Error Check and Reset Again!!!!
+	//
+	if (Efuse[0] != 0x29 || Efuse[1] != 0x81)
+	{
+		// SW autoload fail, we have to read again!!!
+		if (index ++ < 5)
+		{
+			RT_TRACE(COMP_INIT, "EFUSE R FAIL %d\n", index);
+			efuse_ReadAllMap(dev, Efuse);
+			// Wait a few time ???? Or need to do some setting ???
+			// When we reload driver, efuse will be OK!!
+		}
+	}
+	else
+	{
+		index = 0;
+	}
+
+	//efuse_PowerSwitch(pAdapter, FALSE);
+#endif
+}	// efuse_ReadAllMap
+
+
+/*-----------------------------------------------------------------------------
+ * Function:	efuse_WriteAllMap
+ *
+ * Overview:	Write All Efuse content
+ *
+ * Input:       NONE
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ * When			Who		Remark
+ * 11/11/2008 	MHC		Create Version 0.
+ *
+ *---------------------------------------------------------------------------*/
+#ifdef TO_DO_LIST
+static	void
+efuse_WriteAllMap(struct net_device* dev,u8 *eeprom, u32 eeprom_size)
+{
+	unsigned char word_en = 0x00;
+
+	unsigned char tmpdata[8];
+	unsigned char offset;
+
+	// For Efuse write action, we must enable LDO2.5V and 40MHZ clk.
+	efuse_PowerSwitch(dev, TRUE);
+
+	//sdio contents
+	for(offset=0 ; offset< eeprom_size/PGPKT_DATA_SIZE ; offset++)
+	{
+		// 92S will only reserv 0x18-1F 8 bytes now. The 3rd efuse write area!
+		if (IS_HARDWARE_TYPE_8192SE(dev))
+		{
+			// Refer to
+			// 0x18-1f Reserve >0x50 Reserve for tx power
+			if (offset == 3/* || offset > 9*/)
+				continue;//word_en = 0x0F;
+			//else if (offset == 9)	// 0x4c-4f Reserve
+				//word_en = 0x0C;
+			else
+				word_en = 0x00;
+		}
+		//RT_TRACE(COMP_EFUSE, ("Addr=%d size=%d Word_En=%02x\n", offset, eeprom_size, word_en));
+
+		//memcpy(tmpdata,eeprom+(offset*PGPKT_DATA_SIZE),8);
+		memcpy(tmpdata, (eeprom+(offset*PGPKT_DATA_SIZE)), 8);
+
+		//RT_PRINT_DATA(COMP_INIT, DBG_LOUD, ("EFUSE\t"), tmpdata, 8);
+
+		efuse_PgPacketWrite(dev,offset,word_en,tmpdata);
+
+
+	}
+
+	// For warm reboot, we must resume Efuse clock to 500K.
+	efuse_PowerSwitch(dev, FALSE);
+
+}	// efuse_WriteAllMap
+#endif
+
+/*-----------------------------------------------------------------------------
+ * Function:	efuse_PgPacketRead
+ *
+ * Overview:	Receive dedicated Efuse are content. For92s, we support 16
+ *				area now. It will return 8 bytes content for every area.
+ *
+ * Input:       NONE
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ * When			Who		Remark
+ * 11/16/2008 	MHC		Reorganize code Arch and assign as local API.
+ *
+ *---------------------------------------------------------------------------*/
+static	u8
+efuse_PgPacketRead(	struct net_device*	dev,	u8 offset, u8	*data)
+{
+	u8 ReadState = PG_STATE_HEADER;
+
+	bool bContinual = TRUE;
+	bool  bDataEmpty = TRUE ;
+
+	u8 efuse_data,word_cnts=0;
+	u16 efuse_addr = 0;
+	u8 hoffset=0,hworden=0;
+	u8 tmpidx=0;
+	u8 tmpdata[8];
+
+	if(data==NULL)	return FALSE;
+	if(offset>15)		return FALSE;
+
+	//FIXLZM
+	//PlatformFillMemory((PVOID)data, sizeof(u8)*PGPKT_DATA_SIZE, 0xff);
+	//PlatformFillMemory((PVOID)tmpdata, sizeof(u8)*PGPKT_DATA_SIZE, 0xff);
+	memset(data, 0xff, sizeof(u8)*PGPKT_DATA_SIZE);
+	memset(tmpdata, 0xff, sizeof(u8)*PGPKT_DATA_SIZE);
+
+	//RT_PRINT_DATA(COMP_EFUSE, DBG_LOUD, ("efuse_PgPacketRead-1\n"), data, 8);
+
+	//efuse_reg_ctrl(pAdapter,TRUE);//power on
+	while(bContinual && (efuse_addr  < EFUSE_MAX_SIZE) )
+	{
+		//-------  Header Read -------------
+		if(ReadState & PG_STATE_HEADER)
+		{
+			if(efuse_OneByteRead(dev, efuse_addr ,&efuse_data)&&(efuse_data!=0xFF)){
+				hoffset = (efuse_data>>4) & 0x0F;
+				hworden =  efuse_data & 0x0F;
+				word_cnts = efuse_CalculateWordCnts(hworden);
+				bDataEmpty = TRUE ;
+
+				if(hoffset==offset){
+					for(tmpidx = 0;tmpidx< word_cnts*2 ;tmpidx++){
+						if(efuse_OneByteRead(dev, efuse_addr+1+tmpidx ,&efuse_data) ){
+							tmpdata[tmpidx] = efuse_data;
+							if(efuse_data!=0xff){
+								bDataEmpty = FALSE;
+							}
+						}
+					}
+					if(bDataEmpty==FALSE){
+						ReadState = PG_STATE_DATA;
+					}else{//read next header
+						efuse_addr = efuse_addr + (word_cnts*2)+1;
+						ReadState = PG_STATE_HEADER;
+					}
+				}
+				else{//read next header
+					efuse_addr = efuse_addr + (word_cnts*2)+1;
+					ReadState = PG_STATE_HEADER;
+				}
+
+			}
+			else{
+				bContinual = FALSE ;
+			}
+		}
+		//-------  Data section Read -------------
+		else if(ReadState & PG_STATE_DATA)
+		{
+			efuse_WordEnableDataRead(hworden,tmpdata,data);
+			efuse_addr = efuse_addr + (word_cnts*2)+1;
+			ReadState = PG_STATE_HEADER;
+		}
+
+	}
+	//efuse_reg_ctrl(pAdapter,FALSE);//power off
+
+	//RT_PRINT_DATA(COMP_EFUSE, DBG_LOUD, ("efuse_PgPacketRead-2\n"), data, 8);
+
+	if(	(data[0]==0xff) &&(data[1]==0xff) && (data[2]==0xff)  && (data[3]==0xff) &&
+		(data[4]==0xff) &&(data[5]==0xff) && (data[6]==0xff)  && (data[7]==0xff))
+		return FALSE;
+	else
+		return TRUE;
+
+}	// efuse_PgPacketRead
+
+
+/*-----------------------------------------------------------------------------
+ * Function:	efuse_PgPacketWrite
+ *
+ * Overview:	Send A G package for different section in real efuse area.
+ *				For 92S, One PG package contain 8 bytes content and 4 word
+ *				unit. PG header = 0x[bit7-4=offset][bit3-0word enable]
+ *
+ * Input:       NONE
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ * When			Who		Remark
+ * 11/16/2008 	MHC		Reorganize code Arch and assign as local API.
+ *
+ *---------------------------------------------------------------------------*/
+static u8 efuse_PgPacketWrite(struct net_device* dev, u8 offset, u8 word_en,u8 *data)
+{
+	u8 WriteState = PG_STATE_HEADER;
+
+	bool bContinual = TRUE,bDataEmpty=TRUE, bResult = TRUE;
+	u16 efuse_addr = 0;
+	u8 efuse_data;
+
+	u8 pg_header = 0;
+
+	//u16 tmp_addr=0;
+	u8 tmp_word_cnts=0,target_word_cnts=0;
+	u8 tmp_header,match_word_en,tmp_word_en;
+
+	//u8	efuse_clk_ori,efuse_clk_new;
+
+	PGPKT_STRUCT target_pkt;
+	PGPKT_STRUCT tmp_pkt;
+
+	u8 originaldata[sizeof(u8)*8];
+	u8 tmpindex = 0,badworden = 0x0F;
+
+	static u32 repeat_times = 0;
+
+	if( efuse_GetCurrentSize(dev) >= EFUSE_MAX_SIZE)
+	{
+		printk("efuse_PgPacketWrite error \n");
+		return FALSE;
+	}
+
+	// Init the 8 bytes content as 0xff
+	target_pkt.offset = offset;
+	target_pkt.word_en= word_en;
+
+	//PlatformFillMemory((PVOID)target_pkt.data, sizeof(u8)*8, 0xFF);
+	memset(target_pkt.data,0xFF,sizeof(u8)*8);
+
+	efuse_WordEnableDataRead(word_en,data,target_pkt.data);
+	target_word_cnts = efuse_CalculateWordCnts(target_pkt.word_en);
+
+	//efuse_reg_ctrl(pAdapter,TRUE);//power on
+	printk("EFUSE Power ON\n");
+
+	while( bContinual && (efuse_addr  < EFUSE_MAX_SIZE) )
+	{
+
+		if(WriteState==PG_STATE_HEADER)
+		{
+			bDataEmpty=TRUE;
+			badworden = 0x0F;
+			//************  so *******************
+			printk("EFUSE PG_STATE_HEADER\n");
+			if (	efuse_OneByteRead(dev, efuse_addr ,&efuse_data) &&
+				(efuse_data!=0xFF))
+			{
+				tmp_header  =  efuse_data;
+
+				tmp_pkt.offset 	= (tmp_header>>4) & 0x0F;
+				tmp_pkt.word_en 	= tmp_header & 0x0F;
+				tmp_word_cnts =  efuse_CalculateWordCnts(tmp_pkt.word_en);
+
+				//************  so-1 *******************
+				if(tmp_pkt.offset  != target_pkt.offset)
+				{
+					efuse_addr = efuse_addr + (tmp_word_cnts*2) +1; //Next pg_packet
+					#if (EFUSE_ERROE_HANDLE == 1)
+					WriteState = PG_STATE_HEADER;
+					#endif
+				}
+				else
+				{
+					//************  so-2 *******************
+					for(tmpindex=0 ; tmpindex<(tmp_word_cnts*2) ; tmpindex++)
+					{
+						if(efuse_OneByteRead(dev, (efuse_addr+1+tmpindex) ,&efuse_data)&&(efuse_data != 0xFF)){
+							bDataEmpty = FALSE;
+						}
+					}
+					//************  so-2-1 *******************
+					if(bDataEmpty == FALSE)
+					{
+						efuse_addr = efuse_addr + (tmp_word_cnts*2) +1; //Next pg_packet
+						#if (EFUSE_ERROE_HANDLE == 1)
+						WriteState=PG_STATE_HEADER;
+						#endif
+					}
+					else
+					{//************  so-2-2 *******************
+						match_word_en = 0x0F;
+						if(   !( (target_pkt.word_en&BIT0)|(tmp_pkt.word_en&BIT0)  ))
+						{
+							 match_word_en &= (~BIT0);
+						}
+						if(   !( (target_pkt.word_en&BIT1)|(tmp_pkt.word_en&BIT1)  ))
+						{
+							 match_word_en &= (~BIT1);
+						}
+						if(   !( (target_pkt.word_en&BIT2)|(tmp_pkt.word_en&BIT2)  ))
+						{
+							 match_word_en &= (~BIT2);
+						}
+						if(   !( (target_pkt.word_en&BIT3)|(tmp_pkt.word_en&BIT3)  ))
+						{
+							 match_word_en &= (~BIT3);
+						}
+
+						//************  so-2-2-A *******************
+						if((match_word_en&0x0F)!=0x0F)
+						{
+							badworden = efuse_WordEnableDataWrite(dev,efuse_addr+1, tmp_pkt.word_en ,target_pkt.data);
+
+							//************  so-2-2-A-1 *******************
+							//############################
+							if(0x0F != (badworden&0x0F))
+							{
+								u8 reorg_offset = offset;
+								u8 reorg_worden=badworden;
+								efuse_PgPacketWrite(dev,reorg_offset,reorg_worden,originaldata);
+							}
+							//############################
+
+							tmp_word_en = 0x0F;
+							if(  (target_pkt.word_en&BIT0)^(match_word_en&BIT0)  )
+							{
+								tmp_word_en &= (~BIT0);
+							}
+							if(   (target_pkt.word_en&BIT1)^(match_word_en&BIT1) )
+							{
+								tmp_word_en &=  (~BIT1);
+							}
+							if(   (target_pkt.word_en&BIT2)^(match_word_en&BIT2) )
+							{
+								tmp_word_en &= (~BIT2);
+							}
+							if(   (target_pkt.word_en&BIT3)^(match_word_en&BIT3) )
+							{
+								tmp_word_en &=(~BIT3);
+							}
+
+							//************  so-2-2-A-2 *******************
+							if((tmp_word_en&0x0F)!=0x0F){
+								//reorganize other pg packet
+								//efuse_addr = efuse_addr + (2*tmp_word_cnts) +1;//next pg packet addr
+								efuse_addr = efuse_GetCurrentSize(dev);
+								//===========================
+								target_pkt.offset = offset;
+								target_pkt.word_en= tmp_word_en;
+								//===========================
+							}else{
+								bContinual = FALSE;
+							}
+							#if (EFUSE_ERROE_HANDLE == 1)
+							WriteState=PG_STATE_HEADER;
+							repeat_times++;
+							if(repeat_times>EFUSE_REPEAT_THRESHOLD_){
+								bContinual = FALSE;
+								bResult = FALSE;
+							}
+							#endif
+						}
+						else{//************  so-2-2-B *******************
+							//reorganize other pg packet
+							efuse_addr = efuse_addr + (2*tmp_word_cnts) +1;//next pg packet addr
+							//===========================
+							target_pkt.offset = offset;
+							target_pkt.word_en= target_pkt.word_en;
+							//===========================
+							#if (EFUSE_ERROE_HANDLE == 1)
+							WriteState=PG_STATE_HEADER;
+							#endif
+						}
+					}
+				}
+				printk("EFUSE PG_STATE_HEADER-1\n");
+			}
+			else		//************  s1: header == oxff  *******************
+			{
+				pg_header = ((target_pkt.offset << 4)&0xf0) |target_pkt.word_en;
+
+				efuse_OneByteWrite(dev,efuse_addr, pg_header);
+				efuse_OneByteRead(dev,efuse_addr, &tmp_header);
+
+				if(tmp_header == pg_header)
+				{ //************  s1-1*******************
+					WriteState = PG_STATE_DATA;
+				}
+				#if (EFUSE_ERROE_HANDLE == 1)
+				else if(tmp_header == 0xFF){//************  s1-3: if Write or read func doesn't work *******************
+					//efuse_addr doesn't change
+					WriteState = PG_STATE_HEADER;
+					repeat_times++;
+					if(repeat_times>EFUSE_REPEAT_THRESHOLD_){
+						bContinual = FALSE;
+						bResult = FALSE;
+					}
+				}
+				#endif
+				else
+				{//************  s1-2 : fixed the header procedure *******************
+					tmp_pkt.offset = (tmp_header>>4) & 0x0F;
+					tmp_pkt.word_en=  tmp_header & 0x0F;
+					tmp_word_cnts =  efuse_CalculateWordCnts(tmp_pkt.word_en);
+
+					//************  s1-2-A :cover the exist data *******************
+					memset(originaldata,0xff,sizeof(u8)*8);
+					//PlatformFillMemory((PVOID)originaldata, sizeof(u8)*8, 0xff);
+
+					if(efuse_PgPacketRead( dev, tmp_pkt.offset,originaldata))
+					{	//check if data exist
+						//efuse_reg_ctrl(pAdapter,TRUE);//power on
+						badworden = efuse_WordEnableDataWrite(dev,efuse_addr+1,tmp_pkt.word_en,originaldata);
+						//############################
+						if(0x0F != (badworden&0x0F))
+						{
+							u8 reorg_offset = tmp_pkt.offset;
+							u8 reorg_worden=badworden;
+							efuse_PgPacketWrite(dev,reorg_offset,reorg_worden,originaldata);
+							efuse_addr = efuse_GetCurrentSize(dev);
+						}
+						//############################
+						else{
+							efuse_addr = efuse_addr + (tmp_word_cnts*2) +1; //Next pg_packet
+						}
+					}
+					 //************  s1-2-B: wrong address*******************
+					else
+					{
+						efuse_addr = efuse_addr + (tmp_word_cnts*2) +1; //Next pg_packet
+					}
+
+					#if (EFUSE_ERROE_HANDLE == 1)
+					WriteState=PG_STATE_HEADER;
+					repeat_times++;
+					if(repeat_times>EFUSE_REPEAT_THRESHOLD_){
+						bContinual = FALSE;
+						bResult = FALSE;
+					}
+					#endif
+
+					printk("EFUSE PG_STATE_HEADER-2\n");
+				}
+
+			}
+
+		}
+		//write data state
+		else if(WriteState==PG_STATE_DATA)
+		{	//************  s1-1  *******************
+			printk("EFUSE PG_STATE_DATA\n");
+			badworden = 0x0f;
+			badworden = efuse_WordEnableDataWrite(dev,efuse_addr+1,target_pkt.word_en,target_pkt.data);
+			if((badworden&0x0F)==0x0F)
+			{ //************  s1-1-A *******************
+				bContinual = FALSE;
+			}
+			else
+			{//reorganize other pg packet //************  s1-1-B *******************
+				efuse_addr = efuse_addr + (2*target_word_cnts) +1;//next pg packet addr
+
+				//===========================
+				target_pkt.offset = offset;
+				target_pkt.word_en= badworden;
+				target_word_cnts =  efuse_CalculateWordCnts(target_pkt.word_en);
+				//===========================
+				#if (EFUSE_ERROE_HANDLE == 1)
+				WriteState=PG_STATE_HEADER;
+				repeat_times++;
+				if(repeat_times>EFUSE_REPEAT_THRESHOLD_){
+					bContinual = FALSE;
+					bResult = FALSE;
+				}
+				#endif
+				printk("EFUSE PG_STATE_HEADER-3\n");
+			}
+		}
+	}
+
+	//efuse_reg_ctrl(pAdapter,FALSE);//power off
+
+	return TRUE;
+}	// efuse_PgPacketWrite
+
+
+/*-----------------------------------------------------------------------------
+ * Function:	efuse_WordEnableDataRead
+ *
+ * Overview:	Read allowed word in current efuse section data.
+ *
+ * Input:       NONE
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ * When			Who		Remark
+ * 11/16/2008 	MHC		Create Version 0.
+ * 11/21/2008 	MHC		Fix Write bug when we only enable late word.
+ *
+ *---------------------------------------------------------------------------*/
+static	void
+efuse_WordEnableDataRead(	u8 word_en,u8 *sourdata,u8 *targetdata)
+{
+	//u8 tmpindex = 0;
+
+	//DbgPrint("efuse_WordEnableDataRead word_en = %x\n", word_en);
+
+	//RT_PRINT_DATA(COMP_EFUSE, DBG_LOUD, ("sourdata\n"), sourdata, 8);
+	//RT_PRINT_DATA(COMP_EFUSE, DBG_LOUD, ("targetdata\n"), targetdata, 8);
+
+	if (!(word_en&BIT0))
+	{
+		targetdata[0] = sourdata[0];//sourdata[tmpindex++];
+		targetdata[1] = sourdata[1];//sourdata[tmpindex++];
+	}
+	if (!(word_en&BIT1))
+	{
+		targetdata[2] = sourdata[2];//sourdata[tmpindex++];
+		targetdata[3] = sourdata[3];//sourdata[tmpindex++];
+	}
+	if (!(word_en&BIT2))
+	{
+		targetdata[4] = sourdata[4];//sourdata[tmpindex++];
+		targetdata[5] = sourdata[5];//sourdata[tmpindex++];
+	}
+	if (!(word_en&BIT3))
+	{
+		targetdata[6] = sourdata[6];//sourdata[tmpindex++];
+		targetdata[7] = sourdata[7];//sourdata[tmpindex++];
+	}
+}	// efuse_WordEnableDataRead
+
+
+/*-----------------------------------------------------------------------------
+ * Function:	efuse_WordEnableDataWrite
+ *
+ * Overview:	Write necessary word unit into current efuse section!
+ *
+ * Input:       NONE
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ * When			Who		Remark
+ * 11/16/2008 	MHC		Reorganize Efuse operate flow!!.
+ *
+ *---------------------------------------------------------------------------*/
+static	u8
+efuse_WordEnableDataWrite(	struct net_device*	dev,	u16 efuse_addr, u8 word_en, u8 *data)
+{
+	u16 tmpaddr = 0;
+	u16 start_addr = efuse_addr;
+	u8 badworden = 0x0F;
+	//u8 NextState;
+	u8 tmpdata[8];
+
+	memset(tmpdata,0xff,PGPKT_DATA_SIZE);
+	//PlatformFillMemory((PVOID)tmpdata, PGPKT_DATA_SIZE, 0xff);
+
+	//RT_TRACE(COMP_EFUSE, "word_en = %x efuse_addr=%x\n", word_en, efuse_addr);
+
+	//RT_PRINT_DATA(COMP_EFUSE, DBG_LOUD, ("U-EFUSE\n"), data, 8);
+
+	if(!(word_en&BIT0))
+	{
+		tmpaddr = start_addr;
+		efuse_OneByteWrite(dev,start_addr++, data[0]);
+		efuse_OneByteWrite(dev,start_addr++, data[1]);
+
+		efuse_OneByteRead(dev,tmpaddr, &tmpdata[0]);
+		efuse_OneByteRead(dev,tmpaddr+1, &tmpdata[1]);
+		if((data[0]!=tmpdata[0])||(data[1]!=tmpdata[1])){
+			badworden &= (~BIT0);
+		}
+	}
+	if(!(word_en&BIT1))
+	{
+		tmpaddr = start_addr;
+		efuse_OneByteWrite(dev,start_addr++, data[2]);
+		efuse_OneByteWrite(dev,start_addr++, data[3]);
+
+		efuse_OneByteRead(dev,tmpaddr    , &tmpdata[2]);
+		efuse_OneByteRead(dev,tmpaddr+1, &tmpdata[3]);
+		if((data[2]!=tmpdata[2])||(data[3]!=tmpdata[3])){
+			badworden &=( ~BIT1);
+		}
+	}
+	if(!(word_en&BIT2))
+	{
+		tmpaddr = start_addr;
+		efuse_OneByteWrite(dev,start_addr++, data[4]);
+		efuse_OneByteWrite(dev,start_addr++, data[5]);
+
+		efuse_OneByteRead(dev,tmpaddr, &tmpdata[4]);
+		efuse_OneByteRead(dev,tmpaddr+1, &tmpdata[5]);
+		if((data[4]!=tmpdata[4])||(data[5]!=tmpdata[5])){
+			badworden &=( ~BIT2);
+		}
+	}
+	if(!(word_en&BIT3))
+	{
+		tmpaddr = start_addr;
+		efuse_OneByteWrite(dev,start_addr++, data[6]);
+		efuse_OneByteWrite(dev,start_addr++, data[7]);
+
+		efuse_OneByteRead(dev,tmpaddr, &tmpdata[6]);
+		efuse_OneByteRead(dev,tmpaddr+1, &tmpdata[7]);
+		if((data[6]!=tmpdata[6])||(data[7]!=tmpdata[7])){
+			badworden &=( ~BIT3);
+		}
+	}
+	return badworden;
+}	// efuse_WordEnableDataWrite
+
+
+/*-----------------------------------------------------------------------------
+ * Function:	efuse_PowerSwitch
+ *
+ * Overview:	When we want to enable write operation, we should change to
+ *				pwr on state. When we stop write, we should switch to 500k mode
+ *				and disable LDO 2.5V.
+ *
+ * Input:       NONE
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ * When			Who		Remark
+ * 11/17/2008 	MHC		Create Version 0.
+ *
+ *---------------------------------------------------------------------------*/
+static	void
+efuse_PowerSwitch(struct net_device* dev, u8 PwrState)
+{
+	u8	tempval;
+	if (PwrState == TRUE)
+	{
+		// Enable LDO 2.5V for write action
+		tempval = read_nic_byte(dev, EFUSE_TEST+3);
+		write_nic_byte(dev, EFUSE_TEST+3, (tempval | 0x80));
+
+		// Change Efuse Clock for write action to 40MHZ
+		write_nic_byte(dev, EFUSE_CLK, 0x03);
+	}
+	else
+	{
+		// Enable LDO 2.5V for write action
+		tempval = read_nic_byte(dev, EFUSE_TEST+3);
+		write_nic_byte(dev, EFUSE_TEST+3, (tempval & 0x7F));
+
+		// Change Efuse Clock for write action to 500K
+		write_nic_byte(dev, EFUSE_CLK, 0x02);
+	}
+
+}	/* efuse_PowerSwitch */
+
+
+/*-----------------------------------------------------------------------------
+ * Function:	efuse_GetCurrentSize
+ *
+ * Overview:	Get current efuse size!!!
+ *
+ * Input:       NONE
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ * When			Who		Remark
+ * 11/16/2008 	MHC		Create Version 0.
+ *
+ *---------------------------------------------------------------------------*/
+static	u16
+efuse_GetCurrentSize(struct net_device*	dev)
+{
+	bool bContinual = TRUE;
+
+	u16 efuse_addr = 0;
+	u8 hoffset=0,hworden=0;
+	u8 efuse_data,word_cnts=0;
+
+	//efuse_reg_ctrl(pAdapter,TRUE);//power on
+
+	while (	bContinual &&
+			efuse_OneByteRead(dev, efuse_addr ,&efuse_data) &&
+			(efuse_addr  < EFUSE_MAX_SIZE) )
+	{
+		if(efuse_data!=0xFF)
+		{
+			hoffset = (efuse_data>>4) & 0x0F;
+			hworden =  efuse_data & 0x0F;
+			word_cnts = efuse_CalculateWordCnts(hworden);
+			//read next header
+			efuse_addr = efuse_addr + (word_cnts*2)+1;
+		}
+		else
+		{
+			bContinual = FALSE ;
+		}
+	}
+
+	//efuse_reg_ctrl(pAdapter,FALSE);//power off
+
+	return efuse_addr;
+
+}	// efuse_GetCurrentSize}
+
+
+/*  11/16/2008 MH Add description. Get current efuse area enabled word!!. */
+static u8
+efuse_CalculateWordCnts(u8	word_en)
+{
+	u8 word_cnts = 0;
+	if(!(word_en & BIT0))	word_cnts++; // 0 : write enable
+	if(!(word_en & BIT1))	word_cnts++;
+	if(!(word_en & BIT2))	word_cnts++;
+	if(!(word_en & BIT3))	word_cnts++;
+	return word_cnts;
+}	// efuse_CalculateWordCnts
+
+
+/*-----------------------------------------------------------------------------
+ * Function:	efuse_ResetLoader
+ *
+ * Overview:	When read Efuse Fail we must reset loader!!!!
+ *
+ * Input:       NONE
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ * When			Who		Remark
+ * 11/22/2008 	MHC		Create Version 0.
+ *
+ *---------------------------------------------------------------------------*/
+#if 0
+static void efuse_ResetLoader(struct net_device* dev)
+{
+	u16	tmpU2b;
+
+	//
+	// 2008/11/22 MH Sometimes, we may read efuse fail, for preventing the condition
+	// We have to reset loader.
+	//
+	tmpU2b = read_nic_word(dev, SYS_FUNC_EN);
+	write_nic_word(dev, SYS_FUNC_EN, (tmpU2b&~(BIT12)));
+	//PlatformStallExecution(10000);	// How long should we delay!!!
+	mdelay(10);
+	write_nic_word(dev, SYS_FUNC_EN, (tmpU2b|BIT12));
+	//PlatformStallExecution(10000);	// How long should we delay!!!
+	mdelay(10);
+
+}	// efuse_ResetLoader
+#endif
+
+/*-----------------------------------------------------------------------------
+ * Function:	EFUSE_ProgramMap
+ *
+ * Overview:	Read EFUSE map file and execute PG.
+ *
+ * Input:       NONE
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ * When			Who		Remark
+ * 11/10/2008 	MHC		Create Version 0.
+ *
+ *---------------------------------------------------------------------------*/
+ #ifdef TO_DO_LIST
+extern	bool	// 0=Shadow 1=Real Efuse
+EFUSE_ProgramMap(struct net_device* dev, char* pFileName,u8	TableType)
+{
+	struct r8192_priv 	*priv = ieee80211_priv(dev);
+	s4Byte			nLinesRead, ithLine;
+	RT_STATUS		rtStatus = RT_STATUS_SUCCESS;
+	char* 			szLine;
+	u32			u4bRegValue, u4RegMask;
+	u32			u4bMove;
+	u16			index = 0;
+	u16			i;
+	u8			eeprom[HWSET_MAX_SIZE_92S];
+
+	rtStatus = PlatformReadFile(
+					dev,
+					pFileName,
+					(u8*)(priv->BufOfLines),
+					MAX_LINES_HWCONFIG_TXT,
+					MAX_BYTES_LINE_HWCONFIG_TXT,
+					&nLinesRead
+					);
+
+	if(rtStatus == RT_STATUS_SUCCESS)
+	{
+		memcp(pHalData->BufOfLines3, pHalData->BufOfLines,
+			nLinesRead*MAX_BYTES_LINE_HWCONFIG_TXT);
+		pHalData->nLinesRead3 = nLinesRead;
+	}
+
+	if(rtStatus == RT_STATUS_SUCCESS)
+	{
+		printk("szEepromFile(): read %s ok\n", pFileName);
+		for(ithLine = 0; ithLine < nLinesRead; ithLine++)
+		{
+			szLine = pHalData->BufOfLines[ithLine];
+			printk("Line-%d String =%s\n", ithLine, szLine);
+
+			if(!IsCommentString(szLine))
+			{
+				// EEPROM map one line has 8 words content.
+				for (i = 0; i < 8; i++)
+				{
+					u32	j;
+
+					//GetHexValueFromString(szLine, &u4bRegValue, &u4bMove);
+					efuse_ParsingMap(szLine, &u4bRegValue, &u4bMove);
+
+					// Get next hex value as EEPROM value.
+					szLine += u4bMove;
+					//WriteEEprom(dev, (u16)(ithLine*8+i), (u16)u4bRegValue);
+					eeprom[index++] = (u8)(u4bRegValue&0xff);
+					eeprom[index++] = (u8)((u4bRegValue>>8)&0xff);
+
+					printk("Addr-%d = %x\n", (ithLine*8+i), u4bRegValue);
+				}
+			}
+
+		}
+
+	}
+	else
+	{
+		printk("szEepromFile(): Fail read%s\n", pFileName);
+		return	RT_STATUS_FAILURE;
+	}
+
+
+	//RT_PRINT_DATA(COMP_EFUSE, DBG_LOUD, ("EFUSE "), eeprom, HWSET_MAX_SIZE_92S);
+
+	// Use map file to update real Efuse or shadow modify table.
+	if (TableType == 1)
+	{
+		efuse_WriteAllMap(dev, eeprom, HWSET_MAX_SIZE_92S);
+	}
+	else
+	{
+		// Modify shadow table.
+		for (i = 0; i < HWSET_MAX_SIZE_92S; i++)
+			EFUSE_ShadowWrite(dev, 1, i, (u32)eeprom[i]);
+	}
+
+	return	rtStatus;
+}	/* EFUSE_ProgramMap */
+
+#endif
+
+//
+//	Description:
+//		Return TRUE if chTmp is represent for hex digit and
+//		FALSE otherwise.
+//
+//
+bool IsHexDigit(	char chTmp)
+{
+	if( (chTmp >= '0' && chTmp <= '9') ||
+		(chTmp >= 'a' && chTmp <= 'f') ||
+		(chTmp >= 'A' && chTmp <= 'F') )
+	{
+		return TRUE;
+	}
+	else
+	{
+		return FALSE;
+	}
+}
+
+//
+//	Description:
+//		Translate a character to hex digit.
+//
+u32 MapCharToHexDigit(char chTmp)
+{
+	if(chTmp >= '0' && chTmp <= '9')
+		return (chTmp - '0');
+	else if(chTmp >= 'a' && chTmp <= 'f')
+		return (10 + (chTmp - 'a'));
+	else if(chTmp >= 'A' && chTmp <= 'F')
+		return (10 + (chTmp - 'A'));
+	else
+		return 0;
+}
+
+/*-----------------------------------------------------------------------------
+ * Function:	efuse_ParsingMap
+ *
+ * Overview:
+ *
+ * Input:       NONE
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ * When			Who		Remark
+ * 11/08/2008 	MHC		Create Version 0.
+ *
+ *---------------------------------------------------------------------------*/
+#ifdef TO_DO_LIST
+static	bool
+efuse_ParsingMap(char* szStr,u32* pu4bVal,u32* pu4bMove)
+{
+	char* 		szScan = szStr;
+
+	// Check input parameter.
+	if(szStr == NULL || pu4bVal == NULL || pu4bMove == NULL)
+	{
+		//RT_TRACE(COMP_EFUSE,
+		//"eeprom_ParsingMap(): Invalid IN args! szStr: %p, pu4bVal: %p, pu4bMove: %p\n",
+		//szStr, pu4bVal, pu4bMove);
+		return FALSE;
+	}
+
+	// Initialize output.
+	*pu4bMove = 0;
+	*pu4bVal = 0;
+
+	// Skip leading space.
+	while(	*szScan != '\0' &&
+			(*szScan == ' ' || *szScan == '\t') )
+	{
+		szScan++;
+		(*pu4bMove)++;
+	}
+
+	// Check if szScan is now pointer to a character for hex digit,
+	// if not, it means this is not a valid hex number.
+	if(!IsHexDigit(*szScan))
+	{
+		return FALSE;
+	}
+
+	// Parse each digit.
+	do
+	{
+		(*pu4bVal) <<= 4;
+		*pu4bVal += MapCharToHexDigit(*szScan);
+
+		szScan++;
+		(*pu4bMove)++;
+	} while(IsHexDigit(*szScan));
+
+	return TRUE;
+
+}	/* efuse_ParsingMap */
+#endif
+
+//
+// Useless Section Code Now!!!!!!
+//
+// Porting from 8712 SDIO
+int efuse_one_byte_rw(struct net_device* dev, u8 bRead, u16 addr, u8 *data)
+{
+	u32 bResult;
+	//u8 efuse_ctlreg,tmpidx = 0;
+	u8 tmpidx = 0;
+	u8 tmpv8=0;
+
+	// -----------------e-fuse reg ctrl ---------------------------------
+
+	write_nic_byte(dev, EFUSE_CTRL+1, (u8)(addr&0xff));		//address
+	tmpv8 = ((u8)((addr>>8) &0x03) ) | (read_nic_byte(dev, EFUSE_CTRL+2)&0xFC );
+	write_nic_byte(dev, EFUSE_CTRL+2, tmpv8);
+
+	if(TRUE==bRead){
+
+		write_nic_byte(dev, EFUSE_CTRL+3,  0x72);//read cmd
+
+		while(!(0x80 & read_nic_byte(dev, EFUSE_CTRL+3)) && (tmpidx<100) ){
+			tmpidx++;
+		}
+		if(tmpidx<100){
+			*data=read_nic_byte(dev, EFUSE_CTRL);
+			bResult = TRUE;
+		}
+		else
+		{
+			*data = 0;
+			bResult = FALSE;
+		}
+
+	}
+	else{
+		//return	0;
+		write_nic_byte(dev, EFUSE_CTRL, *data);//data
+
+		write_nic_byte(dev, EFUSE_CTRL+3, 0xF2);//write cmd
+
+		while((0x80 & read_nic_byte(dev, EFUSE_CTRL+3)) && (tmpidx<100) ){
+			tmpidx++;
+		}
+		if(tmpidx<100)
+		{
+			*data=read_nic_byte(dev, EFUSE_CTRL);
+			bResult = TRUE;
+		}
+		else
+		{
+			*data = 0;
+			bResult = FALSE;
+		}
+
+	}
+	return bResult;
+}
+//------------------------------------------------------------------------------
+void efuse_access(struct net_device* dev, u8 bRead,u16 start_addr, u8 cnts, u8 *data)
+{
+	u8	efuse_clk_ori,efuse_clk_new;//,tmp8;
+	u32 i = 0;
+
+	if(start_addr>0x200) return;
+	//RT_TRACE(_module_rtl871x_mp_ioctl_c_,_drv_err_,
+	//	("\n ===> efuse_access [start_addr=0x%x cnts:%d dataarray:0x%08x  Query Efuse].\n",start_addr,cnts,data));
+	// -----------------SYS_FUNC_EN Digital Core Vdd enable ---------------------------------
+	efuse_clk_ori = read_nic_byte(dev,SYS_FUNC_EN+1);
+	efuse_clk_new = efuse_clk_ori|0x20;
+
+	if(efuse_clk_new!= efuse_clk_ori){
+		//RT_TRACE(_module_rtl871x_mp_ioctl_c_,_drv_err_,("====write 0x10250003=====\n"));
+		write_nic_byte(dev, SYS_FUNC_EN+1, efuse_clk_new);
+	}
+#ifdef _POWERON_DELAY_
+	mdelay(10);
+#endif
+	// -----------------e-fuse pwr & clk reg ctrl ---------------------------------
+	write_nic_byte(dev, EFUSE_TEST+3, (read_nic_byte(dev, EFUSE_TEST+3)|0x80));
+	write_nic_byte(dev, EFUSE_CLK_CTRL, (read_nic_byte(dev, EFUSE_CLK_CTRL)|0x03));
+
+#ifdef _PRE_EXECUTE_READ_CMD_
+	{
+		unsigned char tmpdata;
+		efuse_OneByteRead(dev, 0,&tmpdata);
+	}
+#endif
+
+	//-----------------e-fuse one byte read / write ------------------------------
+	for(i=0;i<cnts;i++){
+		efuse_one_byte_rw(dev,bRead, start_addr+i , data+i);
+		////RT_TRACE(_module_rtl871x_mp_ioctl_c_,_drv_err_,("==>efuse_access addr:0x%02x value:0x%02x\n",data+i,*(data+i)));
+	}
+	// -----------------e-fuse pwr & clk reg ctrl ---------------------------------
+	write_nic_byte(dev, EFUSE_TEST+3, read_nic_byte(dev, EFUSE_TEST+3)&0x7f);
+	write_nic_byte(dev, EFUSE_CLK_CTRL, read_nic_byte(dev, EFUSE_CLK_CTRL)&0xfd);
+
+	// -----------------SYS_FUNC_EN Digital Core Vdd disable ---------------------------------
+	if(efuse_clk_new != efuse_clk_ori)	write_nic_byte(dev, 0x10250003, efuse_clk_ori);
+
+}
+//------------------------------------------------------------------------------
+//------------------------------------------------------------------------------
+
+#ifdef TO_DO_LIST
+static	void efuse_reg_ctrl(struct net_device* dev, u8 bPowerOn)
+{
+	if(TRUE==bPowerOn){
+		// -----------------SYS_FUNC_EN Digital Core Vdd enable ---------------------------------
+		write_nic_byte(dev, SYS_FUNC_EN+1,  read_nic_byte(dev,SYS_FUNC_EN+1)|0x20);
+#ifdef _POWERON_DELAY_
+		mdelay(10);
+#endif
+		// -----------------e-fuse pwr & clk reg ctrl ---------------------------------
+		write_nic_byte(dev, EFUSE_TEST+4, (read_nic_byte(dev, EFUSE_TEST+4)|0x80));
+		write_nic_byte(dev, EFUSE_CLK_CTRL, (read_nic_byte(dev, EFUSE_CLK_CTRL)|0x03));
+#ifdef _PRE_EXECUTE_READ_CMD_
+		{
+			unsigned char tmpdata;
+			efuse_OneByteRead(dev, 0,&tmpdata);
+		}
+
+#endif
+	}
+	else{
+		// -----------------e-fuse pwr & clk reg ctrl ---------------------------------
+		write_nic_byte(dev, EFUSE_TEST+4, read_nic_byte(dev, EFUSE_TEST+4)&0x7f);
+		write_nic_byte(dev, EFUSE_CLK_CTRL, read_nic_byte(dev, EFUSE_CLK_CTRL)&0xfd);
+		// -----------------SYS_FUNC_EN Digital Core Vdd disable ---------------------------------
+
+		//write_nic_byte(pAdapter, SYS_FUNC_EN+1,  read_nic_byte(pAdapter,SYS_FUNC_EN+1)&0xDF);
+	}
+
+
+}
+#endif
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+void efuse_read_data(struct net_device* dev,u8 efuse_read_item,u8 *data,u32 data_size)
+{
+	u8 offset, word_start,byte_start,byte_cnts;
+	u8	efusedata[EFUSE_MAC_LEN];
+	u8 *tmpdata = NULL;
+
+	u8 pg_pkt_cnts ;
+
+	u8 tmpidx;
+	u8 pg_data[8];
+	//u8	temp_value[8] = {0xff};
+
+	if(efuse_read_item>  (sizeof(RTL8712_SDIO_EFUSE_TABLE)/sizeof(EFUSE_MAP))){
+		//error msg
+		return ;
+	}
+
+	offset		= RTL8712_SDIO_EFUSE_TABLE[efuse_read_item].offset ;
+	word_start	= RTL8712_SDIO_EFUSE_TABLE[efuse_read_item].word_start;
+	byte_start 	= RTL8712_SDIO_EFUSE_TABLE[efuse_read_item].byte_start;
+	byte_cnts   	= RTL8712_SDIO_EFUSE_TABLE[efuse_read_item].byte_cnts;
+
+	if(data_size!=byte_cnts){
+		//error msg
+		return;
+	}
+
+	pg_pkt_cnts = (byte_cnts /PGPKT_DATA_SIZE) +1;
+
+	if(pg_pkt_cnts > 1){
+		//tmpdata = _malloc(pg_pkt_cnts*PGPKT_DATA_SIZE);
+		tmpdata = efusedata;
+
+		if(tmpdata!=NULL)
+		{
+			memset(tmpdata,0xff,pg_pkt_cnts*PGPKT_DATA_SIZE);
+			//PlatformFillMemory((PVOID)pg_data, pg_pkt_cnts*PGPKT_DATA_SIZE, 0xff);
+
+			for(tmpidx=0;tmpidx<pg_pkt_cnts;tmpidx++)
+			{
+				memset(pg_data,0xff,PGPKT_DATA_SIZE);
+				//PlatformFillMemory((PVOID)pg_data, PGPKT_DATA_SIZE, 0xff);
+				if(TRUE== efuse_PgPacketRead(dev,offset+tmpidx,pg_data))
+				{
+					memcpy(tmpdata+(PGPKT_DATA_SIZE*tmpidx),pg_data,PGPKT_DATA_SIZE);
+					//PlatformMoveMemory((PVOID)(tmpdata+(PGPKT_DATA_SIZE*tmpidx)), (PVOID)pg_data, PGPKT_DATA_SIZE);
+				}
+			}
+			memcpy(data,(tmpdata+ (2*word_start)+byte_start ),data_size);
+			//PlatformMoveMemory((PVOID)data, (PVOID)(tmpdata+ (2*word_start)+byte_start ), data_size);
+			//_mfree(tmpdata, pg_pkt_cnts*PGPKT_DATA_SIZE);
+		}
+	}
+	else
+	{
+		memset(pg_data,0xff,PGPKT_DATA_SIZE);
+		//PlatformFillMemory((PVOID)pg_data, PGPKT_DATA_SIZE, 0xff);
+		if(TRUE==efuse_PgPacketRead(dev,offset,pg_data)){
+			memcpy(data,pg_data+ (2*word_start)+byte_start ,data_size);
+			//PlatformMoveMemory((PVOID)data, (PVOID)(pg_data+ (2*word_start)+byte_start), data_size);
+		}
+	}
+
+}
+//------------------------------------------------------------------------------
+//per interface doesn't alike
+void efuse_write_data(struct net_device* dev,u8 efuse_write_item,u8 *data,u32 data_size,u32 bWordUnit)
+{
+	u8 offset, word_start,byte_start,byte_cnts;
+	u8 word_en = 0x0f,word_cnts;
+	u8 pg_pkt_cnts ;
+
+	u8 tmpidx,tmpbitmask;
+	u8 pg_data[8],tmpbytes=0;
+
+	if(efuse_write_item>  (sizeof(RTL8712_SDIO_EFUSE_TABLE)/sizeof(EFUSE_MAP))){
+		//error msg
+		return ;
+	}
+
+	offset		= RTL8712_SDIO_EFUSE_TABLE[efuse_write_item].offset ;
+	word_start	= RTL8712_SDIO_EFUSE_TABLE[efuse_write_item].word_start;
+	byte_start 	= RTL8712_SDIO_EFUSE_TABLE[efuse_write_item].byte_start;
+	byte_cnts   	= RTL8712_SDIO_EFUSE_TABLE[efuse_write_item].byte_cnts;
+
+	if(data_size >  byte_cnts){
+		//error msg
+		return;
+	}
+	pg_pkt_cnts = (byte_cnts /PGPKT_DATA_SIZE) +1;
+	word_cnts = byte_cnts /2 ;
+
+	if(byte_cnts %2){
+		word_cnts+=1;
+	}
+	if((byte_start==1)||((byte_cnts%2)==1)){//situation A
+
+		if((efuse_write_item==EFUSE_F0CIS)||(efuse_write_item==EFUSE_F1CIS)){
+			memset(pg_data,0xff,PGPKT_DATA_SIZE);
+			//PlatformFillMemory((PVOID)pg_data, PGPKT_DATA_SIZE, 0xff);
+			efuse_PgPacketRead(dev,offset,pg_data);
+
+			if(efuse_write_item==EFUSE_F0CIS){
+				word_en = 0x07;
+				memcpy(pg_data+word_start*2+byte_start,data,sizeof(u8)*2);
+				//PlatformMoveMemory((PVOID)(pg_data+word_start*2+byte_start), (PVOID)data, sizeof(u8)*2);
+				efuse_PgPacketWrite(dev,offset,word_en,pg_data+(word_start*2));
+
+				word_en = 0x00;
+				efuse_PgPacketWrite(dev,(offset+1),word_en,data+2);
+
+				word_en = 0x00;
+				efuse_PgPacketRead(dev,offset+2,pg_data);
+				memcpy(pg_data,data+2+8,sizeof(u8)*7);
+				//PlatformMoveMemory((PVOID)(pg_data), (PVOID)(data+2+8), sizeof(u8)*7);
+
+				efuse_PgPacketWrite(dev,(offset+2),word_en,pg_data);
+			}
+			else if(efuse_write_item==EFUSE_F1CIS){
+				word_en = 0x07;
+				efuse_PgPacketRead(dev,offset,pg_data);
+				pg_data[7] = data[0];
+				efuse_PgPacketWrite(dev,offset,word_en,pg_data+(word_start*2));
+
+				word_en = 0x00;
+				for(tmpidx = 0 ;tmpidx<(word_cnts/4);tmpidx++){
+					efuse_PgPacketWrite(dev,(offset+1+tmpidx),word_en,data+1+(tmpidx*PGPKT_DATA_SIZE));
+				}
+			}
+
+		}
+		else{
+			memset(pg_data,0xff,PGPKT_DATA_SIZE);
+			//PlatformFillMemory((PVOID)pg_data, PGPKT_DATA_SIZE, 0xff);
+			if((efuse_write_item==EFUSE_SDIO_SETTING)||(efuse_write_item==EFUSE_CCCR)){
+				word_en = 0x0e ;
+				tmpbytes = 2;
+			}
+			else if(efuse_write_item == EFUSE_SDIO_MODE){
+				word_en = 0x0d ;
+				tmpbytes = 2;
+			}
+			else if(efuse_write_item == EFUSE_OCR){
+				word_en = 0x09 ;
+				tmpbytes = 4;
+			}
+			else if((efuse_write_item == EFUSE_EEPROM_VER)||(efuse_write_item==EFUSE_CHAN_PLAN)){
+				word_en = 0x07 ;
+				tmpbytes = 2;
+			}
+			if(bWordUnit==TRUE){
+				memcpy(pg_data+word_start*2 ,data,sizeof(u8)*tmpbytes);
+				//PlatformMoveMemory((PVOID)(pg_data+word_start*2), (PVOID)(data), sizeof(u8)*tmpbytes);
+			}
+			else{
+				efuse_PgPacketRead(dev,offset,pg_data);
+				memcpy(pg_data+(2*word_start)+byte_start,data,sizeof(u8)*byte_cnts);
+				//PlatformMoveMemory((PVOID)(pg_data+(2*word_start)+byte_start), (PVOID)(data), sizeof(u8)*byte_cnts);
+			}
+
+			efuse_PgPacketWrite(dev,offset,word_en,pg_data+(word_start*2));
+
+		}
+
+	}
+	//========================================================================
+	else if(pg_pkt_cnts>1){//situation B
+		if(word_start==0){
+			word_en = 0x00;
+			for(tmpidx = 0 ;tmpidx<(word_cnts/4);tmpidx++)
+			{
+				efuse_PgPacketWrite(dev,(offset+tmpidx),word_en,data+(tmpidx*PGPKT_DATA_SIZE));
+			}
+			word_en = 0x0f;
+			for(tmpidx= 0; tmpidx<(word_cnts%4) ; tmpidx++)
+			{
+				tmpbitmask =tmpidx;
+				word_en &= (~(EFUSE_BIT(tmpbitmask)));
+				//BIT0
+			}
+			efuse_PgPacketWrite(dev,offset+(word_cnts/4),word_en,data+((word_cnts/4)*PGPKT_DATA_SIZE));
+		}else
+		{
+
+		}
+	}
+	//========================================================================
+	else{//situation C
+		word_en = 0x0f;
+		for(tmpidx= 0; tmpidx<word_cnts ; tmpidx++)
+		{
+			tmpbitmask = word_start + tmpidx ;
+			word_en &= (~(EFUSE_BIT(tmpbitmask)));
+		}
+		efuse_PgPacketWrite(dev,offset,word_en,data);
+	}
+
+}
+//------------------------------------------------------------------------------
+
+void efuset_test_func_read(struct net_device* dev)
+{
+	u8 chipid[2];
+	u8 ocr[3];
+	u8 macaddr[6];
+	u8 txpowertable[28];
+
+	memset(chipid,0,sizeof(u8)*2);
+	efuse_read_data(dev,EFUSE_CHIP_ID,chipid,sizeof(chipid));
+
+	memset(ocr,0,sizeof(u8)*3);
+	efuse_read_data(dev,EFUSE_CCCR,ocr,sizeof(ocr));
+
+	memset(macaddr,0,sizeof(u8)*6);
+	efuse_read_data(dev,EFUSE_MAC_ADDR,macaddr,sizeof(macaddr));
+
+	memset(txpowertable,0,sizeof(u8)*28);
+	efuse_read_data(dev,EFUSE_TXPW_TAB,txpowertable,sizeof(txpowertable));
+}
+//------------------------------------------------------------------------------
+
+void efuset_test_func_write(struct net_device* dev)
+{
+	u32 bWordUnit = TRUE;
+	u8 CCCR=0x02,SDIO_SETTING = 0xFF;
+	u8 tmpdata[2];
+
+	u8 macaddr[6] = {0x00,0xe0,0x4c,0x87,0x12,0x66};
+	efuse_write_data(dev,EFUSE_MAC_ADDR,macaddr,sizeof(macaddr),bWordUnit);
+
+	bWordUnit = FALSE;
+	efuse_write_data(dev,EFUSE_CCCR,&CCCR,sizeof(u8),bWordUnit);
+
+	bWordUnit = FALSE;
+	efuse_write_data(dev,EFUSE_SDIO_SETTING,&SDIO_SETTING,sizeof(u8),bWordUnit);
+
+	bWordUnit = TRUE;
+	tmpdata[0] =SDIO_SETTING ;
+	tmpdata[1] =CCCR ;
+	efuse_write_data(dev,EFUSE_SDIO_SETTING,tmpdata,sizeof(tmpdata),bWordUnit);
+
+}
+//------------------------------------------------------------------------------
+
+
+
+
+#endif	// #if (HAL_CODE_BASE == RTL8192_S)
+
+
+
+
+
+
+/* End of Efuse.c */
+
+
+
+
diff --git a/drivers/staging/rtl8192su/r8192S_Efuse.h b/drivers/staging/rtl8192su/r8192S_Efuse.h
new file mode 100644
index 00000000000..1e50153ba02
--- /dev/null
+++ b/drivers/staging/rtl8192su/r8192S_Efuse.h
@@ -0,0 +1,101 @@
+/******************************************************************************
+ *
+ *     (c) Copyright  2008, RealTEK Technologies Inc. All Rights Reserved.
+ *
+ * Module:	Efuse.h	( Header File)
+ *
+ * Note:
+ *
+ * Function:
+ *
+ * Export:
+ *
+ * Abbrev:
+ *
+ * History:
+ * Data			Who		Remark
+ *
+ * 09/23/2008	MHC		Porting Efuse R/W API from WMAC.
+ * 11/10/2008	MHC		Porting Efuse.h from 8712 SDIO.
+ *						1. We muse redefine the header file to fit our coding
+ *						   style.
+ *						2. THe API we export to other module, we must redefine
+ *						   for 8192S series.
+ *
+ *
+******************************************************************************/
+/* Check to see if the file has been included already.  */
+
+#ifndef __INC_EFUSE_H
+#define __INC_EFUSE_H
+
+// Roger porting for 8192SU
+#define		EFUSE_FOR_92SU		1
+
+/*--------------------------Define Parameters-------------------------------*/
+#define		EFUSE_MAC_LEN					0x200
+
+#define		EFUSE_INIT_MAP				0
+#define		EFUSE_MODIFY_MAP				1
+
+#define		EFUSE_CLK_CTRL			EFUSE_CTRL
+#define 	EFUSE_BIT(x)  (1 << (x))
+
+// From 8712!!!!!!!!
+#define		PG_STATE_HEADER 	0x01
+#define		PG_STATE_WORD_0		0x02
+#define		PG_STATE_WORD_1		0x04
+#define		PG_STATE_WORD_2		0x08
+#define		PG_STATE_WORD_3		0x10
+#define		PG_STATE_DATA		0x20
+
+#define		PG_SWBYTE_H			0x01
+#define		PG_SWBYTE_L			0x02
+
+/*--------------------------Define Parameters-------------------------------*/
+
+
+/*------------------------------Define structure----------------------------*/
+
+/*------------------------------Define structure----------------------------*/
+
+
+/*------------------------Export global variable----------------------------*/
+/*------------------------Export global variable----------------------------*/
+
+/*------------------------Export Marco Definition---------------------------*/
+
+/*------------------------Export Marco Definition---------------------------*/
+
+
+/*--------------------------Exported Function prototype---------------------*/
+extern	void
+EFUSE_Initialize(struct net_device* dev);
+extern	u8
+EFUSE_Read1Byte(struct net_device* dev,u16 Address);
+extern	void
+EFUSE_Write1Byte(struct net_device* dev,u16 Address,u8 Value);
+
+#ifdef EFUSE_FOR_92SU
+extern 	void
+ReadEFuse(struct net_device* dev,u16 _offset,u16 _size_byte,u8* pbuf);
+extern	void
+ReadEFuseByte(struct net_device* dev,u16  _offset,u8  *pbuf);
+#endif	// #if (EFUSE_FOR_92SU == 1)
+
+extern	void
+EFUSE_ShadowRead(struct net_device* dev,unsigned char Type,unsigned short Offset,u32 *Value);
+extern	void
+EFUSE_ShadowWrite(struct net_device* dev,unsigned char Type,unsigned short Offset,u32 Value);
+extern	void
+EFUSE_ShadowUpdate(struct net_device* dev);
+extern	void
+EFUSE_ShadowMapUpdate(struct net_device* dev);
+
+extern	bool
+EFUSE_ProgramMap(struct net_device* dev,char* pFileName, u8 TableType);		// 0=Shadow 1=Real Efuse
+/*--------------------------Exported Function prototype---------------------*/
+
+/* End of Efuse.h */
+
+#endif //__INC_EFUSE_H
diff --git a/drivers/staging/rtl8192su/r8192S_FwImgDTM.h b/drivers/staging/rtl8192su/r8192S_FwImgDTM.h
new file mode 100644
index 00000000000..afced75271b
--- /dev/null
+++ b/drivers/staging/rtl8192su/r8192S_FwImgDTM.h
@@ -0,0 +1,3797 @@
+#ifndef HAL8192PciE_FW_IMG_DTM_H
+#define HAL8192PciE_FW_IMG_DTM_H
+
+/*Created on  2008/ 3/11,  8:34*/
+#include <linux/types.h>
+
+#define MACPHY_ArrayLengthDTM 18
+#define MACPHY_Array_PGLengthDTM 30
+#define AGCTAB_ArrayLengthDTM 384
+#define AGCTAB_ArrayLength 384
+
+#define BootArrayLengthDTM 344
+u8 Rtl8192PciEFwBootArrayDTM[BootArrayLengthDTM] = {
+0x10,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x3c,0x08,0xbf,0xc0,0x25,0x08,0x00,0x08,
+0x3c,0x09,0xb0,0x03,0xad,0x28,0x00,0x20,0x40,0x80,0x68,0x00,0x00,0x00,0x00,0x00,
+0x3c,0x0a,0xd0,0x00,0x40,0x8a,0x60,0x00,0x00,0x00,0x00,0x00,0x3c,0x08,0x80,0x01,
+0x25,0x08,0xbc,0xf0,0x24,0x09,0x00,0x01,0x3c,0x01,0x7f,0xff,0x34,0x21,0xff,0xff,
+0x01,0x01,0x50,0x24,0x00,0x09,0x48,0x40,0x35,0x29,0x00,0x01,0x01,0x2a,0x10,0x2b,
+0x14,0x40,0xff,0xfc,0x00,0x00,0x00,0x00,0x3c,0x0a,0x00,0x00,0x25,0x4a,0x00,0x00,
+0x4c,0x8a,0x00,0x00,0x4c,0x89,0x08,0x00,0x00,0x00,0x00,0x00,0x3c,0x08,0x80,0x01,
+0x25,0x08,0xbc,0xf0,0x3c,0x01,0x80,0x00,0x01,0x21,0x48,0x25,0x3c,0x0a,0xbf,0xc0,
+0x25,0x4a,0x00,0x7c,0x3c,0x0b,0xb0,0x03,0xad,0x6a,0x00,0x20,0xad,0x00,0x00,0x00,
+0x21,0x08,0x00,0x04,0x01,0x09,0x10,0x2b,0x14,0x40,0xff,0xf8,0x00,0x00,0x00,0x00,
+0x3c,0x08,0x80,0x01,0x25,0x08,0x7f,0xff,0x24,0x09,0x00,0x01,0x3c,0x01,0x7f,0xff,
+0x34,0x21,0xff,0xff,0x01,0x01,0x50,0x24,0x00,0x09,0x48,0x40,0x35,0x29,0x00,0x01,
+0x01,0x2a,0x10,0x2b,0x14,0x40,0xff,0xfc,0x00,0x00,0x00,0x00,0x3c,0x0a,0x80,0x01,
+0x25,0x4a,0x00,0x00,0x3c,0x01,0x7f,0xff,0x34,0x21,0xff,0xff,0x01,0x41,0x50,0x24,
+0x3c,0x09,0x00,0x01,0x35,0x29,0x7f,0xff,0x4c,0x8a,0x20,0x00,0x4c,0x89,0x28,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x24,0x08,0x04,0x10,
+0x00,0x00,0x00,0x00,0x40,0x88,0xa0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x3c,0x08,0xbf,0xc0,0x00,0x00,0x00,0x00,0x8d,0x09,0x00,0x00,0x00,0x00,0x00,0x00,
+0x3c,0x0a,0xbf,0xc0,0x25,0x4a,0x01,0x20,0x3c,0x0b,0xb0,0x03,0xad,0x6a,0x00,0x20,
+0x3c,0x08,0xb0,0x03,0x8d,0x09,0x00,0x00,0x00,0x00,0x00,0x00,0x35,0x29,0x00,0x10,
+0xad,0x09,0x00,0x00,0x00,0x00,0x00,0x00,0x3c,0x08,0x80,0x00,0x25,0x08,0x5f,0x84,
+0x01,0x00,0x00,0x08,0x00,0x00,0x00,0x00,};
+
+#define MainArrayLengthDTM 48368
+u8 Rtl8192PciEFwMainArrayDTM[MainArrayLengthDTM] = {
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x40,0x04,0x68,0x00,0x40,0x05,0x70,0x00,0x40,0x06,0x40,0x00,0x0c,0x00,0x17,0x50,
+0x00,0x00,0x00,0x00,0x40,0x1a,0x68,0x00,0x33,0x5b,0x00,0x3c,0x17,0x60,0x00,0x09,
+0x00,0x00,0x00,0x00,0x40,0x1b,0x60,0x00,0x00,0x00,0x00,0x00,0x03,0x5b,0xd0,0x24,
+0x40,0x1a,0x70,0x00,0x03,0x40,0x00,0x08,0x42,0x00,0x00,0x10,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x3c,0x02,0xff,0xff,0x34,0x42,0xff,0xff,0x8c,0x43,0x00,0x00,
+0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,0x34,0x63,0x00,0x20,0x24,0x42,0x00,0xd0,
+0xac,0x62,0x00,0x00,0x00,0x00,0x20,0x21,0x27,0x85,0x91,0x50,0x00,0x85,0x18,0x21,
+0x24,0x84,0x00,0x01,0x28,0x82,0x00,0x0a,0x14,0x40,0xff,0xfc,0xa0,0x60,0x00,0x00,
+0x27,0x82,0x91,0x5a,0x24,0x04,0x00,0x06,0x24,0x84,0xff,0xff,0xa4,0x40,0x00,0x00,
+0x04,0x81,0xff,0xfd,0x24,0x42,0x00,0x02,0x24,0x02,0x00,0x03,0xa3,0x82,0x91,0x50,
+0x24,0x02,0x00,0x0a,0x24,0x03,0x09,0xc4,0xa3,0x82,0x91,0x52,0x24,0x02,0x00,0x04,
+0x24,0x04,0x00,0x01,0x24,0x05,0x00,0x02,0xa7,0x83,0x91,0x66,0xa3,0x82,0x91,0x58,
+0x24,0x03,0x04,0x00,0x24,0x02,0x02,0x00,0xaf,0x83,0x91,0x6c,0xa3,0x85,0x91,0x59,
+0xa7,0x82,0x91,0x5a,0xa7,0x84,0x91,0x5c,0xaf,0x84,0x91,0x68,0xa3,0x84,0x91,0x51,
+0xa3,0x80,0x91,0x53,0xa3,0x80,0x91,0x54,0xa3,0x80,0x91,0x55,0xa3,0x84,0x91,0x56,
+0xa3,0x85,0x91,0x57,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x3c,0x03,0xb0,0x03,
+0x3c,0x02,0x80,0x00,0x24,0x42,0x01,0x7c,0x34,0x63,0x00,0x20,0xac,0x62,0x00,0x00,
+0x27,0x84,0x91,0x78,0x00,0x00,0x10,0x21,0x24,0x42,0x00,0x01,0x00,0x02,0x16,0x00,
+0x00,0x02,0x16,0x03,0x28,0x43,0x00,0x03,0xac,0x80,0xff,0xfc,0xa0,0x80,0x00,0x00,
+0x14,0x60,0xff,0xf9,0x24,0x84,0x00,0x0c,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,
+0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,0x34,0x63,0x00,0x20,0x24,0x42,0x01,0xc0,
+0x3c,0x08,0xb0,0x03,0xac,0x62,0x00,0x00,0x35,0x08,0x00,0x70,0x8d,0x02,0x00,0x00,
+0x00,0xa0,0x48,0x21,0x00,0x04,0x26,0x00,0x00,0x02,0x2a,0x43,0x00,0x06,0x36,0x00,
+0x00,0x07,0x3e,0x00,0x00,0x02,0x12,0x03,0x29,0x23,0x00,0x03,0x00,0x04,0x56,0x03,
+0x00,0x06,0x36,0x03,0x00,0x07,0x3e,0x03,0x30,0x48,0x00,0x01,0x10,0x60,0x00,0x11,
+0x30,0xa5,0x00,0x07,0x24,0x02,0x00,0x02,0x00,0x49,0x10,0x23,0x00,0x45,0x10,0x07,
+0x30,0x42,0x00,0x01,0x10,0x40,0x00,0x66,0x00,0x00,0x00,0x00,0x8f,0xa2,0x00,0x10,
+0x00,0x00,0x00,0x00,0x00,0x02,0x21,0x43,0x11,0x00,0x00,0x10,0x00,0x07,0x20,0x0b,
+0x15,0x20,0x00,0x06,0x24,0x02,0x00,0x01,0x3c,0x02,0xb0,0x05,0x34,0x42,0x01,0x20,
+0xa4,0x44,0x00,0x00,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x11,0x22,0x00,0x04,
+0x00,0x00,0x00,0x00,0x3c,0x02,0xb0,0x05,0x08,0x00,0x00,0x94,0x34,0x42,0x01,0x24,
+0x3c,0x02,0xb0,0x05,0x08,0x00,0x00,0x94,0x34,0x42,0x01,0x22,0x15,0x20,0x00,0x54,
+0x24,0x02,0x00,0x01,0x3c,0x02,0xb0,0x03,0x34,0x42,0x00,0x74,0x90,0x43,0x00,0x00,
+0x00,0x00,0x00,0x00,0xaf,0x83,0x91,0x74,0x3c,0x02,0xb0,0x03,0x34,0x42,0x00,0x70,
+0x90,0x43,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x6b,0x00,0x08,0x11,0x60,0x00,0x18,
+0x00,0x09,0x28,0x40,0x00,0x00,0x40,0x21,0x27,0x85,0x91,0x70,0x8c,0xa3,0x00,0x00,
+0x8c,0xa2,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x62,0x38,0x23,0x00,0x43,0x10,0x2a,
+0x10,0x40,0x00,0x3d,0x00,0x00,0x00,0x00,0xac,0xa7,0x00,0x00,0x25,0x02,0x00,0x01,
+0x00,0x02,0x16,0x00,0x00,0x02,0x46,0x03,0x29,0x03,0x00,0x03,0x14,0x60,0xff,0xf3,
+0x24,0xa5,0x00,0x0c,0x3c,0x03,0xb0,0x03,0x34,0x63,0x00,0x70,0x90,0x62,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x4b,0x10,0x23,0xa0,0x62,0x00,0x00,0x00,0x09,0x28,0x40,
+0x00,0xa9,0x10,0x21,0x00,0x02,0x10,0x80,0x27,0x83,0x91,0x78,0x00,0x0a,0x20,0x0b,
+0x00,0x43,0x18,0x21,0x10,0xc0,0x00,0x05,0x00,0x00,0x38,0x21,0x80,0x62,0x00,0x01,
+0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x05,0x00,0x00,0x00,0x00,0x80,0x62,0x00,0x00,
+0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x03,0x00,0xa9,0x10,0x21,0x24,0x07,0x00,0x01,
+0x00,0xa9,0x10,0x21,0x00,0x02,0x30,0x80,0x27,0x82,0x91,0x78,0xa0,0x67,0x00,0x01,
+0x00,0xc2,0x38,0x21,0x80,0xe3,0x00,0x01,0x00,0x00,0x00,0x00,0x10,0x60,0x00,0x07,
+0x00,0x00,0x00,0x00,0x27,0x83,0x91,0x70,0x00,0xc3,0x18,0x21,0x8c,0x62,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x44,0x10,0x21,0xac,0x62,0x00,0x00,0x27,0x85,0x91,0x74,
+0x27,0x82,0x91,0x70,0x00,0xc5,0x28,0x21,0x00,0xc2,0x10,0x21,0x8c,0x43,0x00,0x00,
+0x8c,0xa4,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x64,0x18,0x2a,0x14,0x60,0x00,0x03,
+0x24,0x02,0x00,0x01,0x03,0xe0,0x00,0x08,0xa0,0xe2,0x00,0x00,0xa0,0xe0,0x00,0x00,
+0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x08,0x00,0x00,0xb7,0xac,0xa0,0x00,0x00,
+0x11,0x22,0x00,0x08,0x00,0x00,0x00,0x00,0x3c,0x02,0xb0,0x03,0x34,0x42,0x00,0x7c,
+0x90,0x43,0x00,0x00,0x00,0x00,0x00,0x00,0xaf,0x83,0x91,0x8c,0x08,0x00,0x00,0xa7,
+0x3c,0x02,0xb0,0x03,0x3c,0x02,0xb0,0x03,0x34,0x42,0x00,0x78,0x90,0x43,0x00,0x00,
+0x00,0x00,0x00,0x00,0xaf,0x83,0x91,0x80,0x08,0x00,0x00,0xa7,0x3c,0x02,0xb0,0x03,
+0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,0x34,0x63,0x00,0x20,0x24,0x42,0x04,0x10,
+0x3c,0x05,0xb0,0x03,0xac,0x62,0x00,0x00,0x34,0xa5,0x00,0x70,0x8c,0xa2,0x00,0x00,
+0x90,0x84,0x00,0x08,0x3c,0x06,0xb0,0x03,0x00,0x02,0x16,0x00,0x2c,0x83,0x00,0x03,
+0x34,0xc6,0x00,0x72,0x24,0x07,0x00,0x01,0x10,0x60,0x00,0x11,0x00,0x02,0x2f,0xc2,
+0x90,0xc2,0x00,0x00,0x00,0x00,0x18,0x21,0x00,0x02,0x16,0x00,0x10,0xa7,0x00,0x09,
+0x00,0x02,0x16,0x03,0x14,0x80,0x00,0x0c,0x30,0x43,0x00,0x03,0x83,0x82,0x91,0x78,
+0x00,0x00,0x00,0x00,0x00,0x02,0x10,0x80,0x00,0x43,0x10,0x21,0x00,0x02,0x16,0x00,
+0x00,0x02,0x1e,0x03,0x3c,0x02,0xb0,0x03,0x34,0x42,0x00,0x72,0xa0,0x43,0x00,0x00,
+0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x30,0x45,0x00,0x05,0x10,0x87,0x00,0x04,
+0x30,0x43,0x00,0x06,0x93,0x82,0x91,0x90,0x08,0x00,0x01,0x1f,0x00,0x43,0x10,0x21,
+0x83,0x82,0x91,0x84,0x00,0x00,0x00,0x00,0x00,0x02,0x10,0x40,0x08,0x00,0x01,0x1f,
+0x00,0x45,0x10,0x21,0x10,0x80,0x00,0x05,0x00,0x00,0x18,0x21,0x24,0x63,0x00,0x01,
+0x00,0x64,0x10,0x2b,0x14,0x40,0xff,0xfd,0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,
+0x00,0x00,0x00,0x00,0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,0x24,0x42,0x04,0xe4,
+0x3c,0x04,0xb0,0x02,0x34,0x63,0x00,0x20,0xac,0x62,0x00,0x00,0x34,0x84,0x00,0x08,
+0x24,0x02,0x00,0x01,0xaf,0x84,0x91,0xa0,0xa3,0x82,0x91,0xb0,0xa7,0x80,0x91,0xa4,
+0xa7,0x80,0x91,0xa6,0xaf,0x80,0x91,0xa8,0xaf,0x80,0x91,0xac,0x03,0xe0,0x00,0x08,
+0x00,0x00,0x00,0x00,0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,0x34,0x63,0x00,0x20,
+0x24,0x42,0x05,0x24,0x27,0xbd,0xff,0xe0,0xac,0x62,0x00,0x00,0xaf,0xb1,0x00,0x14,
+0xaf,0xb0,0x00,0x10,0x00,0xa0,0x88,0x21,0xaf,0xbf,0x00,0x18,0x0c,0x00,0x01,0xe3,
+0x00,0x80,0x80,0x21,0x02,0x00,0x20,0x21,0x10,0x40,0x00,0x05,0x02,0x20,0x28,0x21,
+0x8f,0xbf,0x00,0x18,0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x20,
+0x0c,0x00,0x01,0xf9,0x00,0x00,0x00,0x00,0x08,0x00,0x01,0x58,0x00,0x00,0x00,0x00,
+0x3c,0x02,0xb0,0x03,0x3c,0x03,0x80,0x00,0x34,0x42,0x00,0x20,0x24,0x63,0x05,0x80,
+0x27,0xbd,0xff,0xe0,0xac,0x43,0x00,0x00,0xaf,0xb1,0x00,0x14,0xaf,0xb0,0x00,0x10,
+0xaf,0xbf,0x00,0x18,0x8f,0x90,0x91,0xa0,0x0c,0x00,0x01,0xe3,0x00,0x80,0x88,0x21,
+0x14,0x40,0x00,0x2a,0x3c,0x02,0x00,0x80,0x16,0x20,0x00,0x02,0x34,0x42,0x02,0x01,
+0x24,0x02,0x02,0x01,0xae,0x02,0x00,0x00,0x97,0x84,0x91,0xa4,0x97,0x82,0x91,0xa6,
+0x3c,0x03,0xb0,0x02,0x00,0x83,0x20,0x21,0x24,0x42,0x00,0x04,0xa7,0x82,0x91,0xa6,
+0xa4,0x82,0x00,0x00,0x8f,0x84,0x91,0xa8,0x8f,0x82,0x91,0xa0,0x93,0x85,0x91,0x52,
+0x24,0x84,0x00,0x01,0x24,0x42,0x00,0x04,0x24,0x03,0x8f,0xff,0x3c,0x07,0xb0,0x06,
+0x3c,0x06,0xb0,0x03,0x00,0x43,0x10,0x24,0x00,0x85,0x28,0x2a,0x34,0xe7,0x80,0x18,
+0xaf,0x82,0x91,0xa0,0xaf,0x84,0x91,0xa8,0x10,0xa0,0x00,0x08,0x34,0xc6,0x01,0x08,
+0x8f,0x83,0x91,0xac,0x8f,0x84,0x91,0x6c,0x8c,0xc2,0x00,0x00,0x00,0x64,0x18,0x21,
+0x00,0x43,0x10,0x2b,0x14,0x40,0x00,0x09,0x00,0x00,0x00,0x00,0x8c,0xe2,0x00,0x00,
+0x3c,0x03,0x0f,0x00,0x3c,0x04,0x04,0x00,0x00,0x43,0x10,0x24,0x10,0x44,0x00,0x03,
+0x00,0x00,0x00,0x00,0x0c,0x00,0x03,0x95,0x00,0x00,0x00,0x00,0x8f,0xbf,0x00,0x18,
+0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x20,0x27,0xbd,0xff,0xd8,
+0x3c,0x02,0xb0,0x03,0x3c,0x03,0x80,0x00,0x24,0x63,0x06,0x6c,0xaf,0xb0,0x00,0x10,
+0x34,0x42,0x00,0x20,0x8f,0x90,0x91,0xa0,0xac,0x43,0x00,0x00,0xaf,0xb3,0x00,0x1c,
+0xaf,0xb2,0x00,0x18,0xaf,0xb1,0x00,0x14,0xaf,0xbf,0x00,0x20,0x00,0x80,0x88,0x21,
+0x00,0xa0,0x90,0x21,0x0c,0x00,0x01,0xe3,0x00,0xc0,0x98,0x21,0x24,0x07,0x8f,0xff,
+0x14,0x40,0x00,0x19,0x26,0x03,0x00,0x04,0x24,0x02,0x0e,0x03,0xae,0x02,0x00,0x00,
+0x00,0x67,0x80,0x24,0x26,0x02,0x00,0x04,0xae,0x11,0x00,0x00,0x00,0x47,0x80,0x24,
+0x97,0x86,0x91,0xa4,0x26,0x03,0x00,0x04,0xae,0x12,0x00,0x00,0x00,0x67,0x80,0x24,
+0xae,0x13,0x00,0x00,0x8f,0x84,0x91,0xa0,0x3c,0x02,0xb0,0x02,0x97,0x85,0x91,0xa6,
+0x00,0xc2,0x30,0x21,0x8f,0x82,0x91,0xa8,0x24,0x84,0x00,0x10,0x24,0xa5,0x00,0x10,
+0x00,0x87,0x20,0x24,0x24,0x42,0x00,0x01,0xa7,0x85,0x91,0xa6,0xaf,0x84,0x91,0xa0,
+0xaf,0x82,0x91,0xa8,0xa4,0xc5,0x00,0x00,0x8f,0xbf,0x00,0x20,0x7b,0xb2,0x00,0xfc,
+0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x28,0x87,0x83,0x88,0x86,
+0x93,0x82,0x80,0x11,0x00,0x00,0x00,0x00,0x10,0x62,0x00,0x08,0x00,0x00,0x00,0x00,
+0x93,0x83,0x88,0x87,0x24,0x02,0x00,0x01,0xa3,0x82,0x80,0x10,0xa3,0x83,0x80,0x12,
+0xa3,0x83,0x80,0x11,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x93,0x82,0x80,0x12,
+0x00,0x00,0x00,0x00,0x14,0x62,0xff,0xf6,0x00,0x00,0x00,0x00,0x08,0x00,0x01,0xd5,
+0x00,0x00,0x00,0x00,0x30,0x84,0x00,0xff,0x14,0x80,0x00,0x02,0x00,0x00,0x00,0x00,
+0xa3,0x85,0x8b,0x6b,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x93,0x82,0x91,0xb0,
+0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x11,0x24,0x06,0x00,0x01,0x8f,0x82,0x91,0xa8,
+0x3c,0x05,0xb0,0x06,0x3c,0x04,0xb0,0x03,0x34,0xa5,0x80,0x18,0x34,0x84,0x01,0x08,
+0x14,0x40,0x00,0x09,0x00,0x00,0x30,0x21,0x97,0x82,0x91,0xa4,0x8c,0x84,0x00,0x00,
+0x3c,0x03,0xb0,0x02,0x00,0x43,0x10,0x21,0xaf,0x84,0x91,0xac,0xa7,0x80,0x91,0xa6,
+0xac,0x40,0x00,0x00,0xac,0x40,0x00,0x04,0x8c,0xa2,0x00,0x00,0x03,0xe0,0x00,0x08,
+0x00,0xc0,0x10,0x21,0x8f,0x86,0x91,0xa0,0x8f,0x82,0x91,0xa8,0x27,0xbd,0xff,0xe8,
+0xaf,0xbf,0x00,0x10,0x00,0xc0,0x40,0x21,0x14,0x40,0x00,0x0a,0x00,0x40,0x50,0x21,
+0x00,0x00,0x38,0x21,0x27,0x89,0x8b,0x40,0x24,0xe2,0x00,0x01,0x00,0x07,0x18,0x80,
+0x30,0x47,0x00,0xff,0x00,0x69,0x18,0x21,0x2c,0xe2,0x00,0x0a,0x14,0x40,0xff,0xfa,
+0xac,0x60,0x00,0x00,0x3c,0x02,0x00,0x80,0x10,0x82,0x00,0x6d,0x00,0x00,0x00,0x00,
+0x97,0x82,0x8b,0x46,0x00,0x00,0x00,0x00,0x24,0x42,0x00,0x01,0xa7,0x82,0x8b,0x46,
+0x90,0xa3,0x00,0x15,0x97,0x82,0x8b,0x48,0x00,0x03,0x1e,0x00,0x00,0x03,0x1e,0x03,
+0x00,0x43,0x10,0x21,0xa7,0x82,0x8b,0x48,0x8c,0xa4,0x00,0x20,0x3c,0x02,0x00,0x60,
+0x3c,0x03,0x00,0x20,0x00,0x82,0x20,0x24,0x10,0x83,0x00,0x52,0x00,0x00,0x00,0x00,
+0x14,0x80,0x00,0x45,0x00,0x00,0x00,0x00,0x97,0x82,0x8b,0x4c,0x00,0x00,0x00,0x00,
+0x24,0x42,0x00,0x01,0xa7,0x82,0x8b,0x4c,0x84,0xa3,0x00,0x06,0x8f,0x82,0x8b,0x5c,
+0x00,0x00,0x00,0x00,0x00,0x43,0x10,0x21,0xaf,0x82,0x8b,0x5c,0x25,0x42,0x00,0x01,
+0x28,0x43,0x27,0x10,0xaf,0x82,0x91,0xa8,0x10,0x60,0x00,0x09,0x24,0x02,0x00,0x04,
+0x93,0x83,0x80,0x10,0x24,0x02,0x00,0x01,0x10,0x62,0x00,0x05,0x24,0x02,0x00,0x04,
+0x8f,0xbf,0x00,0x10,0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x18,
+0x24,0x03,0x00,0x28,0xa3,0x83,0x8b,0x42,0xa3,0x82,0x8b,0x43,0x90,0xa2,0x00,0x18,
+0x93,0x83,0x8b,0x6b,0x00,0x00,0x38,0x21,0x00,0x02,0x16,0x00,0x00,0x02,0x16,0x03,
+0xa7,0x82,0x8b,0x56,0xa3,0x83,0x8b,0x64,0x27,0x89,0x8b,0x40,0x24,0x05,0x8f,0xff,
+0x00,0x07,0x10,0x80,0x00,0x49,0x10,0x21,0x8c,0x44,0x00,0x00,0x24,0xe3,0x00,0x01,
+0x30,0x67,0x00,0xff,0x25,0x02,0x00,0x04,0x2c,0xe3,0x00,0x0a,0xad,0x04,0x00,0x00,
+0x14,0x60,0xff,0xf7,0x00,0x45,0x40,0x24,0x97,0x83,0x91,0xa6,0x97,0x85,0x91,0xa4,
+0x3c,0x02,0xb0,0x02,0x24,0x63,0x00,0x28,0x00,0xa2,0x28,0x21,0x3c,0x04,0xb0,0x06,
+0xa7,0x83,0x91,0xa6,0x34,0x84,0x80,0x18,0xa4,0xa3,0x00,0x00,0x8c,0x85,0x00,0x00,
+0x24,0x02,0x8f,0xff,0x24,0xc6,0x00,0x28,0x3c,0x03,0x0f,0x00,0x00,0xc2,0x30,0x24,
+0x00,0xa3,0x28,0x24,0x3c,0x02,0x04,0x00,0xaf,0x86,0x91,0xa0,0x10,0xa2,0xff,0xd4,
+0x00,0x00,0x00,0x00,0xa3,0x80,0x80,0x10,0x0c,0x00,0x03,0x95,0x00,0x00,0x00,0x00,
+0x08,0x00,0x02,0x30,0x00,0x00,0x00,0x00,0x97,0x82,0x8b,0x4e,0x00,0x00,0x00,0x00,
+0x24,0x42,0x00,0x01,0xa7,0x82,0x8b,0x4e,0x84,0xa3,0x00,0x06,0x8f,0x82,0x8b,0x60,
+0x00,0x00,0x00,0x00,0x00,0x43,0x10,0x21,0xaf,0x82,0x8b,0x60,0x08,0x00,0x02,0x28,
+0x25,0x42,0x00,0x01,0x97,0x82,0x8b,0x4a,0x00,0x00,0x00,0x00,0x24,0x42,0x00,0x01,
+0xa7,0x82,0x8b,0x4a,0x84,0xa3,0x00,0x06,0x8f,0x82,0x8b,0x58,0x00,0x00,0x00,0x00,
+0x00,0x43,0x10,0x21,0xaf,0x82,0x8b,0x58,0x08,0x00,0x02,0x28,0x25,0x42,0x00,0x01,
+0x97,0x82,0x8b,0x44,0x00,0x00,0x00,0x00,0x24,0x42,0x00,0x01,0xa7,0x82,0x8b,0x44,
+0x08,0x00,0x02,0x10,0x00,0x00,0x00,0x00,0x3c,0x05,0xb0,0x03,0x3c,0x02,0x80,0x00,
+0x27,0xbd,0xff,0xc8,0x00,0x04,0x22,0x00,0x34,0xa5,0x00,0x20,0x24,0x42,0x09,0xf8,
+0x3c,0x03,0xb0,0x00,0xaf,0xb5,0x00,0x24,0xaf,0xb4,0x00,0x20,0xaf,0xb2,0x00,0x18,
+0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x30,0x00,0x83,0x80,0x21,0xaf,0xb7,0x00,0x2c,
+0xaf,0xb6,0x00,0x28,0xaf,0xb3,0x00,0x1c,0xaf,0xb1,0x00,0x14,0xac,0xa2,0x00,0x00,
+0x8e,0x09,0x00,0x00,0x00,0x00,0x90,0x21,0x26,0x10,0x00,0x08,0x00,0x09,0xa6,0x02,
+0x12,0x80,0x00,0x13,0x00,0x00,0xa8,0x21,0x24,0x13,0x00,0x02,0x3c,0x16,0x00,0xff,
+0x3c,0x17,0xff,0x00,0x8e,0x09,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x09,0x12,0x02,
+0x24,0x42,0x00,0x02,0x31,0x25,0x00,0xff,0x10,0xb3,0x00,0x76,0x30,0x51,0x00,0xff,
+0x24,0x02,0x00,0x03,0x10,0xa2,0x00,0x18,0x00,0x00,0x00,0x00,0x02,0x51,0x10,0x21,
+0x30,0x52,0xff,0xff,0x02,0x54,0x18,0x2b,0x14,0x60,0xff,0xf2,0x02,0x11,0x80,0x21,
+0x12,0xa0,0x00,0x0a,0x3c,0x02,0xb0,0x06,0x34,0x42,0x80,0x18,0x8c,0x43,0x00,0x00,
+0x3c,0x04,0x0f,0x00,0x3c,0x02,0x04,0x00,0x00,0x64,0x18,0x24,0x10,0x62,0x00,0x03,
+0x00,0x00,0x00,0x00,0x0c,0x00,0x03,0x95,0x00,0x00,0x00,0x00,0x8f,0xbf,0x00,0x30,
+0x7b,0xb6,0x01,0x7c,0x7b,0xb4,0x01,0x3c,0x7b,0xb2,0x00,0xfc,0x7b,0xb0,0x00,0xbc,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x38,0x8e,0x09,0x00,0x04,0x24,0x15,0x00,0x01,
+0x8e,0x06,0x00,0x0c,0x00,0x09,0x11,0x42,0x00,0x09,0x18,0xc2,0x30,0x48,0x00,0x03,
+0x00,0x09,0x14,0x02,0x30,0x6c,0x00,0x03,0x00,0x09,0x26,0x02,0x11,0x15,0x00,0x45,
+0x30,0x43,0x00,0x0f,0x29,0x02,0x00,0x02,0x14,0x40,0x00,0x26,0x00,0x00,0x00,0x00,
+0x11,0x13,0x00,0x0f,0x00,0x00,0x38,0x21,0x00,0x07,0x22,0x02,0x30,0x84,0xff,0x00,
+0x3c,0x03,0x00,0xff,0x00,0x07,0x2e,0x02,0x00,0x07,0x12,0x00,0x00,0x43,0x10,0x24,
+0x00,0xa4,0x28,0x25,0x00,0xa2,0x28,0x25,0x00,0x07,0x1e,0x00,0x00,0xa3,0x28,0x25,
+0x0c,0x00,0x01,0x9b,0x01,0x20,0x20,0x21,0x08,0x00,0x02,0xa4,0x02,0x51,0x10,0x21,
+0x11,0x95,0x00,0x0f,0x00,0x00,0x00,0x00,0x11,0x88,0x00,0x07,0x00,0x00,0x00,0x00,
+0x00,0x04,0x10,0x80,0x27,0x83,0x91,0x50,0x00,0x43,0x10,0x21,0x8c,0x47,0x00,0x18,
+0x08,0x00,0x02,0xcb,0x00,0x07,0x22,0x02,0x00,0x04,0x10,0x40,0x27,0x83,0x91,0x58,
+0x00,0x43,0x10,0x21,0x94,0x47,0x00,0x02,0x08,0x00,0x02,0xcb,0x00,0x07,0x22,0x02,
+0x27,0x82,0x91,0x50,0x00,0x82,0x10,0x21,0x90,0x47,0x00,0x00,0x08,0x00,0x02,0xcb,
+0x00,0x07,0x22,0x02,0x15,0x00,0xff,0xdc,0x00,0x00,0x38,0x21,0x10,0x75,0x00,0x05,
+0x00,0x80,0x38,0x21,0x00,0x65,0x18,0x26,0x24,0x82,0x01,0x00,0x00,0x00,0x38,0x21,
+0x00,0x43,0x38,0x0a,0x24,0x02,0x00,0x01,0x11,0x82,0x00,0x0e,0x3c,0x02,0xb0,0x03,
+0x24,0x02,0x00,0x02,0x11,0x82,0x00,0x06,0x00,0x00,0x00,0x00,0x3c,0x02,0xb0,0x03,
+0x00,0xe2,0x10,0x21,0x8c,0x47,0x00,0x00,0x08,0x00,0x02,0xcb,0x00,0x07,0x22,0x02,
+0x3c,0x02,0xb0,0x03,0x00,0xe2,0x10,0x21,0x94,0x43,0x00,0x00,0x08,0x00,0x02,0xca,
+0x30,0x67,0xff,0xff,0x00,0xe2,0x10,0x21,0x90,0x43,0x00,0x00,0x08,0x00,0x02,0xca,
+0x30,0x67,0x00,0xff,0x30,0x62,0x00,0x03,0x00,0x02,0x12,0x00,0x11,0x95,0x00,0x07,
+0x00,0x44,0x38,0x21,0x11,0x93,0x00,0x03,0x00,0x00,0x00,0x00,0x08,0x00,0x02,0xfc,
+0x3c,0x02,0xb0,0x0a,0x08,0x00,0x03,0x01,0x3c,0x02,0xb0,0x0a,0x08,0x00,0x03,0x05,
+0x3c,0x02,0xb0,0x0a,0x8e,0x09,0x00,0x04,0x8e,0x02,0x00,0x08,0x8e,0x03,0x00,0x0c,
+0x00,0x09,0x41,0x42,0x00,0x02,0x22,0x02,0x00,0x03,0x3a,0x02,0x30,0x84,0xff,0x00,
+0x30,0xe7,0xff,0x00,0x00,0x02,0x5e,0x02,0x00,0x02,0x32,0x00,0x00,0x03,0x56,0x02,
+0x00,0x03,0x2a,0x00,0x01,0x64,0x58,0x25,0x00,0xd6,0x30,0x24,0x01,0x47,0x50,0x25,
+0x00,0x02,0x16,0x00,0x00,0xb6,0x28,0x24,0x00,0x03,0x1e,0x00,0x01,0x66,0x58,0x25,
+0x01,0x45,0x50,0x25,0x00,0x57,0x10,0x24,0x00,0x77,0x18,0x24,0x01,0x62,0x38,0x25,
+0x01,0x43,0x30,0x25,0x00,0x09,0x10,0xc2,0x00,0x09,0x1c,0x02,0x31,0x08,0x00,0x03,
+0x30,0x4c,0x00,0x03,0x30,0x63,0x00,0x0f,0x00,0x09,0x26,0x02,0x00,0xe0,0x58,0x21,
+0x15,0x00,0x00,0x28,0x00,0xc0,0x50,0x21,0x24,0x02,0x00,0x01,0x10,0x62,0x00,0x06,
+0x00,0x80,0x28,0x21,0x24,0x02,0x00,0x03,0x14,0x62,0xff,0x69,0x02,0x51,0x10,0x21,
+0x24,0x85,0x01,0x00,0x24,0x02,0x00,0x01,0x11,0x82,0x00,0x15,0x24,0x02,0x00,0x02,
+0x11,0x82,0x00,0x0a,0x3c,0x03,0xb0,0x03,0x00,0xa3,0x18,0x21,0x8c,0x62,0x00,0x00,
+0x00,0x0a,0x20,0x27,0x01,0x6a,0x28,0x24,0x00,0x44,0x10,0x24,0x00,0x45,0x10,0x25,
+0xac,0x62,0x00,0x00,0x08,0x00,0x02,0xa4,0x02,0x51,0x10,0x21,0x00,0xa3,0x18,0x21,
+0x94,0x62,0x00,0x00,0x00,0x0a,0x20,0x27,0x01,0x6a,0x28,0x24,0x00,0x44,0x10,0x24,
+0x00,0x45,0x10,0x25,0xa4,0x62,0x00,0x00,0x08,0x00,0x02,0xa4,0x02,0x51,0x10,0x21,
+0x3c,0x03,0xb0,0x03,0x00,0xa3,0x18,0x21,0x90,0x62,0x00,0x00,0x00,0x0a,0x20,0x27,
+0x01,0x6a,0x28,0x24,0x00,0x44,0x10,0x24,0x00,0x45,0x10,0x25,0x08,0x00,0x02,0xa3,
+0xa0,0x62,0x00,0x00,0x24,0x02,0x00,0x01,0x11,0x02,0x00,0x21,0x00,0x00,0x00,0x00,
+0x15,0x13,0xff,0x42,0x00,0x00,0x00,0x00,0x11,0x82,0x00,0x17,0x00,0x00,0x00,0x00,
+0x11,0x88,0x00,0x0b,0x00,0x00,0x00,0x00,0x27,0x83,0x91,0x50,0x00,0x04,0x20,0x80,
+0x00,0x83,0x20,0x21,0x8c,0x82,0x00,0x18,0x00,0x06,0x18,0x27,0x00,0xe6,0x28,0x24,
+0x00,0x43,0x10,0x24,0x00,0x45,0x10,0x25,0x08,0x00,0x02,0xa3,0xac,0x82,0x00,0x18,
+0x27,0x83,0x91,0x58,0x00,0x04,0x20,0x40,0x00,0x83,0x20,0x21,0x94,0x82,0x00,0x02,
+0x00,0x06,0x18,0x27,0x00,0xe6,0x28,0x24,0x00,0x43,0x10,0x24,0x00,0x45,0x10,0x25,
+0x08,0x00,0x02,0xa3,0xa4,0x82,0x00,0x02,0x27,0x83,0x91,0x50,0x00,0x83,0x18,0x21,
+0x90,0x62,0x00,0x00,0x00,0x06,0x20,0x27,0x08,0x00,0x03,0x59,0x00,0xe6,0x28,0x24,
+0x30,0x62,0x00,0x07,0x00,0x02,0x12,0x00,0x11,0x88,0x00,0x0f,0x00,0x44,0x10,0x21,
+0x11,0x93,0x00,0x07,0x00,0x00,0x00,0x00,0x3c,0x03,0xb0,0x0a,0x00,0x43,0x18,0x21,
+0x8c,0x62,0x00,0x00,0x00,0x06,0x20,0x27,0x08,0x00,0x03,0x46,0x00,0xe6,0x28,0x24,
+0x3c,0x03,0xb0,0x0a,0x00,0x43,0x18,0x21,0x94,0x62,0x00,0x00,0x00,0x06,0x20,0x27,
+0x08,0x00,0x03,0x4f,0x00,0xe6,0x28,0x24,0x3c,0x03,0xb0,0x0a,0x08,0x00,0x03,0x7c,
+0x00,0x43,0x18,0x21,0x97,0x85,0x91,0xa4,0x3c,0x07,0xb0,0x02,0x3c,0x04,0xb0,0x03,
+0x3c,0x02,0x80,0x00,0x00,0xa7,0x28,0x21,0x34,0x84,0x00,0x20,0x24,0x42,0x0e,0x54,
+0x24,0x03,0xff,0x80,0xac,0x82,0x00,0x00,0xa0,0xa3,0x00,0x07,0x97,0x82,0x91,0xa6,
+0x97,0x85,0x91,0xa4,0x3c,0x06,0xb0,0x06,0x30,0x42,0xff,0xf8,0x24,0x42,0x00,0x10,
+0x00,0xa2,0x10,0x21,0x30,0x42,0x0f,0xff,0x24,0x44,0x00,0x08,0x30,0x84,0x0f,0xff,
+0x00,0x05,0x28,0xc2,0x3c,0x03,0x00,0x40,0x00,0xa3,0x28,0x25,0x00,0x87,0x20,0x21,
+0x34,0xc6,0x80,0x18,0xac,0xc5,0x00,0x00,0xaf,0x84,0x91,0xa0,0xa7,0x82,0x91,0xa4,
+0xa7,0x80,0x91,0xa6,0xaf,0x80,0x91,0xa8,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,
+0x30,0xa5,0x00,0xff,0x30,0x84,0x00,0xff,0x24,0x02,0x00,0x01,0x00,0xe0,0x48,0x21,
+0x30,0xc6,0x00,0xff,0x8f,0xa7,0x00,0x10,0x10,0x82,0x00,0x07,0x00,0xa0,0x40,0x21,
+0x24,0x02,0x00,0x03,0x10,0x82,0x00,0x03,0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,
+0x00,0x00,0x00,0x00,0x24,0xa8,0x01,0x00,0x3c,0x03,0xb0,0x03,0x24,0x02,0x00,0x01,
+0x00,0x07,0x20,0x27,0x01,0x27,0x28,0x24,0x10,0xc2,0x00,0x14,0x01,0x03,0x18,0x21,
+0x24,0x02,0x00,0x02,0x10,0xc2,0x00,0x09,0x00,0x07,0x50,0x27,0x3c,0x03,0xb0,0x03,
+0x01,0x03,0x18,0x21,0x8c,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x4a,0x10,0x24,
+0x00,0x45,0x10,0x25,0x08,0x00,0x03,0xe0,0xac,0x62,0x00,0x00,0x3c,0x03,0xb0,0x03,
+0x01,0x03,0x18,0x21,0x94,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x4a,0x10,0x24,
+0x00,0x45,0x10,0x25,0x03,0xe0,0x00,0x08,0xa4,0x62,0x00,0x00,0x90,0x62,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x44,0x10,0x24,0x00,0x45,0x10,0x25,0xa0,0x62,0x00,0x00,
+0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x30,0x84,0x00,0x07,0x00,0x04,0x22,0x00,
+0x30,0xa5,0x00,0xff,0x00,0x85,0x28,0x21,0x3c,0x02,0xb0,0x0a,0x00,0xa2,0x40,0x21,
+0x30,0xc6,0x00,0xff,0x24,0x02,0x00,0x01,0x8f,0xa4,0x00,0x10,0x10,0xc2,0x00,0x14,
+0x24,0x02,0x00,0x02,0x00,0x04,0x50,0x27,0x10,0xc2,0x00,0x09,0x00,0xe4,0x48,0x24,
+0x3c,0x03,0xb0,0x0a,0x00,0xa3,0x18,0x21,0x8c,0x62,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x4a,0x10,0x24,0x00,0x49,0x10,0x25,0x03,0xe0,0x00,0x08,0xac,0x62,0x00,0x00,
+0x3c,0x03,0xb0,0x0a,0x00,0xa3,0x18,0x21,0x94,0x62,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x4a,0x10,0x24,0x00,0x49,0x10,0x25,0x03,0xe0,0x00,0x08,0xa4,0x62,0x00,0x00,
+0x91,0x02,0x00,0x00,0x00,0x04,0x18,0x27,0x00,0xe4,0x20,0x24,0x00,0x43,0x10,0x24,
+0x00,0x44,0x10,0x25,0x03,0xe0,0x00,0x08,0xa1,0x02,0x00,0x00,0x30,0xa9,0x00,0xff,
+0x27,0x83,0x91,0x50,0x30,0x85,0x00,0xff,0x24,0x02,0x00,0x01,0x00,0x07,0x50,0x27,
+0x00,0xc7,0x40,0x24,0x11,0x22,0x00,0x17,0x00,0xa3,0x18,0x21,0x00,0x05,0x20,0x40,
+0x27,0x82,0x91,0x50,0x00,0x05,0x28,0x80,0x27,0x83,0x91,0x58,0x00,0x83,0x50,0x21,
+0x00,0xa2,0x20,0x21,0x24,0x02,0x00,0x02,0x00,0x07,0x40,0x27,0x11,0x22,0x00,0x07,
+0x00,0xc7,0x28,0x24,0x8c,0x82,0x00,0x18,0x00,0x00,0x00,0x00,0x00,0x48,0x10,0x24,
+0x00,0x45,0x10,0x25,0x03,0xe0,0x00,0x08,0xac,0x82,0x00,0x18,0x95,0x42,0x00,0x02,
+0x00,0x00,0x00,0x00,0x00,0x48,0x10,0x24,0x00,0x45,0x10,0x25,0x03,0xe0,0x00,0x08,
+0xa5,0x42,0x00,0x02,0x90,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x4a,0x10,0x24,
+0x00,0x48,0x10,0x25,0x03,0xe0,0x00,0x08,0xa0,0x62,0x00,0x00,0x00,0x04,0x32,0x02,
+0x30,0xc6,0xff,0x00,0x00,0x04,0x16,0x02,0x00,0x04,0x1a,0x00,0x3c,0x05,0x00,0xff,
+0x00,0x65,0x18,0x24,0x00,0x46,0x10,0x25,0x00,0x43,0x10,0x25,0x00,0x04,0x26,0x00,
+0x03,0xe0,0x00,0x08,0x00,0x44,0x10,0x25,0x3c,0x02,0xb0,0x02,0x34,0x42,0x00,0x08,
+0x3c,0x03,0xb0,0x02,0xaf,0x82,0x8b,0x78,0xaf,0x83,0x8b,0x7c,0xa7,0x80,0x8b,0x80,
+0xa7,0x80,0x8b,0x82,0xaf,0x80,0x8b,0x84,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,
+0x27,0xbd,0xff,0xd8,0xaf,0xbf,0x00,0x20,0x94,0x82,0x00,0x04,0x00,0x00,0x00,0x00,
+0x30,0x42,0xe0,0x00,0x10,0x40,0x00,0x05,0x00,0x80,0x18,0x21,0x8f,0xbf,0x00,0x20,
+0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x28,0x90,0x84,0x00,0x02,
+0x00,0x00,0x00,0x00,0x30,0x84,0x00,0xfc,0x0c,0x00,0x06,0xc9,0x00,0x64,0x20,0x21,
+0x08,0x00,0x04,0x47,0x00,0x00,0x00,0x00,0x27,0xbd,0xff,0xd8,0xaf,0xb2,0x00,0x18,
+0xaf,0xb1,0x00,0x14,0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x20,0xaf,0xb3,0x00,0x1c,
+0x8f,0x90,0x91,0xa0,0x0c,0x00,0x2b,0xd1,0x00,0x80,0x90,0x21,0x00,0x40,0x88,0x21,
+0x93,0x82,0x82,0x20,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x1b,0x24,0x02,0x00,0x01,
+0xa3,0x82,0x82,0x20,0x24,0x03,0x00,0x05,0x24,0x02,0x00,0x04,0xa3,0x83,0x8b,0x73,
+0xa3,0x82,0x8b,0x72,0xa7,0x80,0x82,0x22,0x00,0x00,0x28,0x21,0x27,0x86,0x8b,0x70,
+0x00,0x05,0x10,0x80,0x00,0x46,0x10,0x21,0x8c,0x44,0x00,0x00,0x24,0xa3,0x00,0x01,
+0x30,0x65,0xff,0xff,0xae,0x04,0x00,0x00,0x10,0xa0,0xff,0xfa,0x00,0x05,0x10,0x80,
+0x8f,0x83,0x91,0xa0,0x97,0x82,0x91,0xa6,0x24,0x05,0x8f,0xff,0x24,0x63,0x00,0x04,
+0x00,0x65,0x18,0x24,0x26,0x04,0x00,0x04,0x24,0x42,0x00,0x04,0xaf,0x83,0x91,0xa0,
+0xa7,0x82,0x91,0xa6,0x00,0x85,0x80,0x24,0x97,0x84,0x82,0x22,0x27,0x93,0x80,0x2c,
+0x02,0x40,0x28,0x21,0x00,0x93,0x20,0x21,0x0c,0x00,0x2c,0x55,0x02,0x20,0x30,0x21,
+0x97,0x87,0x82,0x22,0x24,0x02,0x00,0x52,0x00,0xf1,0x18,0x21,0xa7,0x83,0x82,0x22,
+0x82,0x44,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x82,0x00,0x06,0x00,0x60,0x38,0x21,
+0x8f,0xbf,0x00,0x20,0x7b,0xb2,0x00,0xfc,0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x28,0x82,0x43,0x00,0x01,0x24,0x02,0x00,0x54,0x14,0x62,0xff,0xf8,
+0x24,0x02,0x00,0x4c,0x82,0x43,0x00,0x02,0x00,0x00,0x00,0x00,0x14,0x62,0xff,0xf4,
+0x00,0x00,0x00,0x00,0x30,0xe6,0xff,0xff,0x10,0xc0,0x00,0x0c,0x00,0x00,0x28,0x21,
+0x02,0x60,0x48,0x21,0x24,0x08,0x8f,0xff,0x00,0xa9,0x10,0x21,0x8c,0x44,0x00,0x00,
+0x24,0xa3,0x00,0x04,0x30,0x65,0xff,0xff,0x26,0x02,0x00,0x04,0x00,0xa6,0x18,0x2b,
+0xae,0x04,0x00,0x00,0x14,0x60,0xff,0xf8,0x00,0x48,0x80,0x24,0x97,0x83,0x91,0xa6,
+0x97,0x85,0x91,0xa4,0x3c,0x02,0xb0,0x02,0x00,0x67,0x18,0x21,0x00,0xa2,0x28,0x21,
+0x3c,0x04,0xb0,0x06,0xa7,0x83,0x91,0xa6,0x34,0x84,0x80,0x18,0xa4,0xa3,0x00,0x00,
+0x8f,0x82,0x91,0xa0,0x8c,0x86,0x00,0x00,0x30,0xe5,0xff,0xff,0x24,0x03,0x8f,0xff,
+0x00,0x45,0x10,0x21,0x3c,0x04,0x0f,0x00,0x00,0x43,0x10,0x24,0x00,0xc4,0x30,0x24,
+0x3c,0x03,0x04,0x00,0xaf,0x82,0x91,0xa0,0x10,0xc3,0xff,0xd1,0x00,0x00,0x00,0x00,
+0x0c,0x00,0x03,0x95,0x00,0x00,0x00,0x00,0xa3,0x80,0x82,0x20,0x08,0x00,0x04,0x88,
+0x00,0x00,0x00,0x00,0x8f,0x82,0x8b,0x7c,0x97,0x83,0x8b,0x80,0x8f,0x87,0x8b,0x78,
+0x3c,0x06,0xff,0xff,0xac,0x43,0x00,0x00,0x8f,0x82,0x8b,0x7c,0x3c,0x03,0x80,0x00,
+0x24,0xe5,0x00,0x08,0xac,0x43,0x00,0x04,0x8f,0x82,0x8b,0x7c,0x34,0xc6,0x1f,0xff,
+0x3c,0x03,0x00,0x40,0x30,0x42,0x0f,0xff,0x3c,0x04,0xb0,0x06,0x00,0x02,0x10,0xc2,
+0x00,0x43,0x10,0x25,0x00,0xa6,0x28,0x24,0x34,0x84,0x80,0x18,0x27,0xbd,0xff,0xf8,
+0xac,0x82,0x00,0x00,0xaf,0x85,0x8b,0x78,0xaf,0x87,0x8b,0x7c,0xa7,0x80,0x8b,0x80,
+0xa7,0x80,0x8b,0x82,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x08,0x03,0xe0,0x00,0x08,
+0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,
+0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x27,0xbd,0xff,0xe0,
+0xaf,0xb2,0x00,0x18,0xaf,0xb1,0x00,0x14,0xaf,0xb0,0x00,0x10,0x8f,0x91,0x8b,0x78,
+0x00,0x80,0x80,0x21,0xaf,0xbf,0x00,0x1c,0x0c,0x00,0x05,0x78,0x00,0xa0,0x90,0x21,
+0x97,0x82,0x8b,0x80,0x36,0x10,0x12,0x00,0x26,0x2a,0x00,0x04,0x24,0x4c,0x00,0x14,
+0x2c,0x42,0x04,0x01,0x14,0x40,0x00,0x0a,0x24,0x09,0x8f,0xff,0x8f,0x82,0x80,0x18,
+0x00,0x00,0x00,0x00,0x24,0x42,0x00,0x01,0xaf,0x82,0x80,0x18,0x8f,0xbf,0x00,0x1c,
+0x8f,0xb2,0x00,0x18,0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x20,
+0x8e,0x44,0x00,0x1c,0x86,0x47,0x00,0x06,0x97,0x86,0x8b,0x82,0x8c,0x82,0x00,0x08,
+0x00,0x07,0x3c,0x00,0x8f,0x85,0x8b,0x78,0x00,0x02,0x11,0x02,0x30,0x42,0x40,0x00,
+0x02,0x02,0x80,0x25,0xae,0x30,0x00,0x00,0x8c,0x82,0x00,0x04,0x82,0x43,0x00,0x15,
+0x01,0x49,0x88,0x24,0x00,0x02,0x14,0xc2,0x00,0x03,0x1a,0x00,0x00,0x02,0x14,0x00,
+0x00,0x62,0x80,0x25,0xae,0x30,0x00,0x00,0x92,0x43,0x00,0x13,0x92,0x44,0x00,0x10,
+0x96,0x50,0x00,0x1a,0x00,0x03,0x1c,0x00,0x00,0x04,0x26,0x00,0x02,0x03,0x80,0x25,
+0x26,0x22,0x00,0x04,0x00,0x49,0x88,0x24,0x02,0x04,0x80,0x25,0xae,0x30,0x00,0x00,
+0x92,0x42,0x00,0x0f,0x92,0x43,0x00,0x11,0x26,0x24,0x00,0x04,0x00,0x02,0x12,0x00,
+0x00,0x89,0x88,0x24,0x00,0x62,0x80,0x25,0x02,0x07,0x80,0x25,0x26,0x22,0x00,0x04,
+0xae,0x30,0x00,0x00,0x00,0x49,0x88,0x24,0xae,0x20,0x00,0x00,0x8f,0x82,0x80,0x14,
+0x24,0xc6,0x00,0x01,0x24,0xa5,0x00,0x14,0x30,0xc8,0xff,0xff,0x3c,0x0b,0xb0,0x03,
+0x00,0xa9,0x28,0x24,0x24,0x42,0x00,0x01,0x2d,0x08,0x00,0x0a,0xaf,0x85,0x8b,0x78,
+0xa7,0x8c,0x8b,0x80,0xaf,0x82,0x80,0x14,0xa7,0x86,0x8b,0x82,0x11,0x00,0x00,0x07,
+0x35,0x6b,0x01,0x08,0x8f,0x82,0x8b,0x84,0x8d,0x63,0x00,0x00,0x24,0x42,0x04,0x00,
+0x00,0x62,0x18,0x2b,0x14,0x60,0xff,0xc1,0x00,0x00,0x00,0x00,0x0c,0x00,0x04,0xbd,
+0x00,0x00,0x00,0x00,0x08,0x00,0x04,0xf3,0x00,0x00,0x00,0x00,0x27,0xbd,0xff,0xe8,
+0xaf,0xbf,0x00,0x10,0x0c,0x00,0x05,0x78,0x00,0x00,0x00,0x00,0x8f,0xbf,0x00,0x10,
+0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x18,0x27,0xbd,0xff,0xe0,
+0xaf,0xb2,0x00,0x18,0xaf,0xb1,0x00,0x14,0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x1c,
+0x8f,0x90,0x8b,0x78,0x0c,0x00,0x05,0x78,0x00,0x80,0x90,0x21,0x97,0x82,0x8b,0x80,
+0x24,0x11,0x8f,0xff,0x2c,0x42,0x04,0x01,0x14,0x40,0x00,0x06,0x26,0x03,0x00,0x04,
+0x8f,0xbf,0x00,0x1c,0x8f,0xb2,0x00,0x18,0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x20,0x24,0x02,0x0e,0x03,0xae,0x02,0x00,0x00,0x00,0x71,0x80,0x24,
+0xae,0x00,0x00,0x00,0x8e,0x44,0x00,0x08,0x26,0x02,0x00,0x04,0x0c,0x00,0x05,0x86,
+0x00,0x51,0x80,0x24,0x97,0x86,0x8b,0x82,0x8f,0x83,0x8b,0x78,0xae,0x02,0x00,0x00,
+0x97,0x82,0x8b,0x80,0x24,0xc6,0x00,0x01,0x8e,0x47,0x00,0x0c,0x24,0x63,0x00,0x10,
+0x30,0xc5,0xff,0xff,0x26,0x04,0x00,0x04,0x3c,0x08,0xb0,0x03,0x00,0x71,0x18,0x24,
+0x00,0x91,0x80,0x24,0x24,0x42,0x00,0x10,0x2c,0xa5,0x00,0x0a,0x35,0x08,0x01,0x08,
+0xae,0x07,0x00,0x00,0xaf,0x83,0x8b,0x78,0xa7,0x82,0x8b,0x80,0xa7,0x86,0x8b,0x82,
+0x10,0xa0,0x00,0x07,0x00,0x00,0x00,0x00,0x8f,0x82,0x8b,0x84,0x8d,0x03,0x00,0x00,
+0x24,0x42,0x04,0x00,0x00,0x62,0x18,0x2b,0x14,0x60,0xff,0xd9,0x00,0x00,0x00,0x00,
+0x0c,0x00,0x04,0xbd,0x00,0x00,0x00,0x00,0x08,0x00,0x05,0x4c,0x00,0x00,0x00,0x00,
+0x97,0x82,0x8b,0x82,0x3c,0x03,0xb0,0x03,0x14,0x40,0x00,0x09,0x34,0x63,0x01,0x08,
+0x8c,0x62,0x00,0x00,0x8f,0x83,0x8b,0x7c,0xa7,0x80,0x8b,0x80,0xaf,0x82,0x8b,0x84,
+0xac,0x60,0x00,0x00,0x8f,0x82,0x8b,0x7c,0x00,0x00,0x00,0x00,0xac,0x40,0x00,0x04,
+0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x04,0x32,0x02,0x30,0xc6,0xff,0x00,
+0x00,0x04,0x16,0x02,0x00,0x04,0x1a,0x00,0x3c,0x05,0x00,0xff,0x00,0x65,0x18,0x24,
+0x00,0x46,0x10,0x25,0x00,0x43,0x10,0x25,0x00,0x04,0x26,0x00,0x03,0xe0,0x00,0x08,
+0x00,0x44,0x10,0x25,0x80,0x82,0x00,0x00,0x90,0x83,0x00,0x00,0x10,0x40,0x00,0x0c,
+0x00,0x80,0x28,0x21,0x24,0x62,0xff,0x9f,0x30,0x42,0x00,0xff,0x2c,0x42,0x00,0x1a,
+0x10,0x40,0x00,0x02,0x24,0x63,0xff,0xe0,0xa0,0xa3,0x00,0x00,0x24,0xa5,0x00,0x01,
+0x90,0xa2,0x00,0x00,0x00,0x00,0x00,0x00,0x14,0x40,0xff,0xf6,0x00,0x40,0x18,0x21,
+0x03,0xe0,0x00,0x08,0x00,0x80,0x10,0x21,0x80,0x82,0x00,0x00,0x90,0x83,0x00,0x00,
+0x10,0x40,0x00,0x0c,0x00,0x80,0x28,0x21,0x24,0x62,0xff,0xbf,0x30,0x42,0x00,0xff,
+0x2c,0x42,0x00,0x1a,0x10,0x40,0x00,0x02,0x24,0x63,0x00,0x20,0xa0,0xa3,0x00,0x00,
+0x24,0xa5,0x00,0x01,0x90,0xa2,0x00,0x00,0x00,0x00,0x00,0x00,0x14,0x40,0xff,0xf6,
+0x00,0x40,0x18,0x21,0x03,0xe0,0x00,0x08,0x00,0x80,0x10,0x21,0x27,0xbd,0xff,0xe8,
+0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x14,0x24,0x10,0xff,0xff,0x0c,0x00,0x29,0x11,
+0x00,0x00,0x00,0x00,0x10,0x50,0xff,0xfd,0x00,0x02,0x16,0x00,0x00,0x02,0x16,0x03,
+0x8f,0xbf,0x00,0x14,0x8f,0xb0,0x00,0x10,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x18,
+0x27,0xbd,0xff,0xc8,0xaf,0xb3,0x00,0x1c,0x00,0x00,0x98,0x21,0xaf,0xb1,0x00,0x14,
+0x02,0x65,0x88,0x2b,0xaf,0xb6,0x00,0x28,0xaf,0xb5,0x00,0x24,0xaf,0xb0,0x00,0x10,
+0xaf,0xbf,0x00,0x34,0xaf,0xbe,0x00,0x30,0xaf,0xb7,0x00,0x2c,0xaf,0xb4,0x00,0x20,
+0xaf,0xb2,0x00,0x18,0x00,0xa0,0xb0,0x21,0xaf,0xa4,0x00,0x38,0x00,0xc0,0xa8,0x21,
+0x12,0x20,0x00,0x17,0x00,0x80,0x80,0x21,0x24,0x17,0xff,0xff,0x24,0x1e,0x00,0x0a,
+0x0c,0x00,0x29,0x11,0x00,0x00,0x00,0x00,0x10,0x57,0x00,0x0f,0x00,0x02,0x16,0x00,
+0x00,0x02,0x26,0x03,0x10,0x9e,0x00,0x0e,0x24,0x02,0x00,0x0d,0x10,0x82,0x00,0x34,
+0x24,0x02,0x00,0x08,0x10,0x82,0x00,0x25,0x24,0x02,0x00,0x09,0x10,0x82,0x00,0x13,
+0x00,0x00,0x90,0x21,0xa2,0x04,0x00,0x00,0x26,0x73,0x00,0x01,0x16,0xa0,0x00,0x0b,
+0x26,0x10,0x00,0x01,0x02,0x76,0x88,0x2b,0x16,0x20,0xff,0xed,0x00,0x00,0x00,0x00,
+0x7b,0xbe,0x01,0xbc,0x7b,0xb6,0x01,0x7c,0x7b,0xb4,0x01,0x3c,0x7b,0xb2,0x00,0xfc,
+0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x38,0x0c,0x00,0x29,0x04,
+0x02,0x76,0x88,0x2b,0x08,0x00,0x05,0xe6,0x00,0x00,0x00,0x00,0x24,0x14,0x00,0x20,
+0xa2,0x14,0x00,0x00,0x26,0x52,0x00,0x01,0x24,0x04,0x00,0x20,0x26,0x73,0x00,0x01,
+0x16,0xa0,0x00,0x06,0x26,0x10,0x00,0x01,0x2a,0x42,0x00,0x08,0x10,0x40,0xff,0xea,
+0x02,0x76,0x88,0x2b,0x08,0x00,0x05,0xf5,0xa2,0x14,0x00,0x00,0x0c,0x00,0x29,0x04,
+0x00,0x00,0x00,0x00,0x08,0x00,0x05,0xfb,0x2a,0x42,0x00,0x08,0x8f,0xa2,0x00,0x38,
+0x00,0x00,0x00,0x00,0x12,0x02,0xff,0xe0,0x00,0x00,0x00,0x00,0x26,0x10,0xff,0xff,
+0x12,0xa0,0xff,0xdc,0x26,0x73,0xff,0xff,0x0c,0x00,0x29,0x04,0x24,0x04,0x00,0x08,
+0x0c,0x00,0x29,0x04,0x24,0x04,0x00,0x20,0x08,0x00,0x05,0xef,0x24,0x04,0x00,0x08,
+0x08,0x00,0x05,0xe8,0xa2,0x00,0x00,0x00,0x90,0x82,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x02,0x1e,0x00,0x10,0x60,0x00,0x16,0x00,0x00,0x30,0x21,0x24,0x07,0x00,0x20,
+0x00,0x03,0x1e,0x03,0x10,0x67,0x00,0x17,0x00,0x00,0x00,0x00,0x10,0x60,0x00,0x15,
+0x00,0x00,0x00,0x00,0x10,0x67,0x00,0x0b,0x24,0xc6,0x00,0x01,0x10,0x60,0x00,0x0a,
+0x00,0x02,0x1e,0x00,0x24,0x05,0x00,0x20,0x24,0x84,0x00,0x01,0x80,0x83,0x00,0x00,
+0x90,0x82,0x00,0x00,0x10,0x65,0x00,0x03,0x00,0x00,0x00,0x00,0x14,0x60,0xff,0xfa,
+0x00,0x00,0x00,0x00,0x00,0x02,0x1e,0x00,0x14,0x60,0xff,0xed,0x00,0x00,0x00,0x00,
+0x28,0xc3,0x00,0x08,0x24,0x02,0x00,0x07,0x00,0x43,0x30,0x0a,0x03,0xe0,0x00,0x08,
+0x00,0xc0,0x10,0x21,0x24,0x84,0x00,0x01,0x90,0x82,0x00,0x00,0x08,0x00,0x06,0x2a,
+0x00,0x02,0x1e,0x00,0x27,0xbd,0xff,0xe0,0xaf,0xb1,0x00,0x14,0x27,0x91,0x8b,0x88,
+0xaf,0xb0,0x00,0x10,0x24,0x06,0x00,0x20,0x00,0x80,0x80,0x21,0x00,0x00,0x28,0x21,
+0xaf,0xbf,0x00,0x18,0x0c,0x00,0x2c,0x4b,0x02,0x20,0x20,0x21,0x82,0x02,0x00,0x00,
+0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x1f,0x00,0x00,0x30,0x21,0x02,0x20,0x20,0x21,
+0x24,0x09,0x00,0x20,0x24,0x08,0x00,0x20,0x24,0x07,0x00,0x08,0xac,0x90,0x00,0x00,
+0x82,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x49,0x00,0x0a,0x00,0x00,0x00,0x00,
+0x10,0x40,0x00,0x08,0x24,0x03,0x00,0x20,0x26,0x10,0x00,0x01,0x82,0x02,0x00,0x00,
+0x00,0x00,0x00,0x00,0x10,0x43,0x00,0x03,0x00,0x00,0x00,0x00,0x14,0x40,0xff,0xfa,
+0x00,0x00,0x00,0x00,0xa2,0x00,0x00,0x00,0x26,0x10,0x00,0x01,0x82,0x02,0x00,0x00,
+0x92,0x03,0x00,0x00,0x10,0x48,0x00,0x0c,0x24,0x05,0x00,0x20,0x24,0xc6,0x00,0x01,
+0x10,0xc7,0x00,0x04,0x24,0x84,0x00,0x04,0x00,0x03,0x16,0x00,0x14,0x40,0xff,0xe7,
+0x00,0x00,0x00,0x00,0x8f,0xbf,0x00,0x18,0x7b,0xb0,0x00,0xbc,0x27,0x82,0x8b,0x88,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x20,0x26,0x10,0x00,0x01,0x82,0x02,0x00,0x00,
+0x92,0x03,0x00,0x00,0x10,0x45,0xff,0xfc,0x00,0x00,0x00,0x00,0x08,0x00,0x06,0x5c,
+0x24,0xc6,0x00,0x01,0x00,0x80,0x30,0x21,0x90,0x84,0x00,0x00,0x00,0x00,0x38,0x21,
+0x10,0x80,0x00,0x19,0x24,0xc6,0x00,0x01,0x24,0x82,0xff,0xd0,0x30,0x42,0x00,0xff,
+0x2c,0x43,0x00,0x0a,0x14,0x60,0x00,0x0c,0x00,0x07,0x19,0x00,0x24,0x83,0xff,0x9f,
+0x24,0x82,0xff,0xa9,0x24,0x88,0xff,0xc9,0x2c,0x63,0x00,0x06,0x24,0x84,0xff,0xbf,
+0x2c,0x84,0x00,0x06,0x14,0x60,0x00,0x03,0x30,0x42,0x00,0xff,0x10,0x80,0x00,0x0e,
+0x31,0x02,0x00,0xff,0x00,0x07,0x19,0x00,0x00,0x62,0x18,0x21,0x00,0x67,0x10,0x2b,
+0x14,0x40,0x00,0x07,0x00,0x00,0x20,0x21,0x90,0xc4,0x00,0x00,0x00,0x60,0x38,0x21,
+0x14,0x80,0xff,0xe9,0x24,0xc6,0x00,0x01,0xac,0xa7,0x00,0x00,0x24,0x04,0x00,0x01,
+0x03,0xe0,0x00,0x08,0x00,0x80,0x10,0x21,0x08,0x00,0x06,0x8c,0x00,0x00,0x20,0x21,
+0x00,0x00,0x20,0x21,0x27,0x85,0x91,0xc0,0x24,0x82,0x00,0x01,0x00,0x04,0x18,0x80,
+0x30,0x44,0x00,0xff,0x00,0x65,0x18,0x21,0x2c,0x82,0x00,0x0b,0x14,0x40,0xff,0xfa,
+0xac,0x60,0x00,0x00,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0xaf,0x84,0x8c,0x08,
+0xaf,0x85,0x8c,0x0c,0xaf,0x86,0x8c,0x10,0xaf,0x87,0x8c,0x14,0x03,0xe0,0x00,0x08,
+0x00,0x00,0x00,0x00,0x8f,0x82,0x84,0x90,0x27,0xbd,0xff,0xe8,0xaf,0xbf,0x00,0x10,
+0x2c,0x43,0x00,0x64,0x24,0x42,0x00,0x01,0x27,0x84,0x8b,0xa8,0xaf,0x82,0x84,0x90,
+0x10,0x60,0x00,0x05,0x00,0x00,0x00,0x00,0x8f,0xbf,0x00,0x10,0x00,0x00,0x00,0x00,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x18,0xaf,0x80,0x84,0x90,0x0c,0x00,0x06,0xf6,
+0x00,0x00,0x00,0x00,0x00,0x40,0x18,0x21,0x28,0x44,0x00,0x08,0x24,0x02,0x00,0x07,
+0x10,0x62,0x00,0x08,0x00,0x00,0x00,0x00,0x14,0x80,0xff,0xf3,0x24,0x02,0x00,0x08,
+0x27,0x84,0x8b,0xa8,0x14,0x62,0xff,0xf0,0x00,0x00,0x00,0x00,0x0c,0x00,0x17,0xb0,
+0x00,0x00,0x00,0x00,0x27,0x84,0x8b,0xa8,0x0c,0x00,0x07,0x54,0x00,0x00,0x00,0x00,
+0x8f,0x83,0x84,0x94,0x3c,0x04,0x80,0x01,0x00,0x60,0x28,0x21,0x24,0x63,0x00,0x01,
+0xaf,0x83,0x84,0x94,0x0c,0x00,0x17,0x9d,0x24,0x84,0x04,0x88,0x08,0x00,0x06,0xaa,
+0x00,0x00,0x00,0x00,0x27,0xbd,0xff,0xc0,0xaf,0xbf,0x00,0x38,0x8c,0x85,0x00,0x0c,
+0x8c,0x88,0x00,0x08,0x18,0xa0,0x00,0x0e,0x00,0x00,0x30,0x21,0x24,0x87,0x00,0x08,
+0x27,0xa9,0x00,0x10,0x00,0x06,0x10,0x80,0x00,0x06,0x19,0x00,0x00,0x49,0x10,0x21,
+0x14,0xc0,0x00,0x1f,0x00,0x83,0x18,0x21,0xaf,0xa7,0x00,0x10,0x24,0xc2,0x00,0x01,
+0x30,0x46,0x00,0xff,0x00,0xc5,0x18,0x2a,0x14,0x60,0xff,0xf7,0x00,0x06,0x10,0x80,
+0x29,0x02,0x00,0x0a,0x14,0x40,0x00,0x05,0x00,0x08,0x18,0x40,0x8f,0xbf,0x00,0x38,
+0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x40,0x00,0x68,0x18,0x21,
+0x27,0x82,0x83,0x8c,0x00,0x03,0x18,0xc0,0x00,0x62,0x18,0x21,0x8c,0x62,0x00,0x10,
+0x01,0x00,0x20,0x21,0x00,0x40,0xf8,0x09,0x27,0xa6,0x00,0x10,0x8f,0x83,0x84,0xa8,
+0x3c,0x04,0x80,0x01,0x00,0x60,0x28,0x21,0x24,0x63,0x00,0x01,0xaf,0x83,0x84,0xa8,
+0x0c,0x00,0x17,0x9d,0x24,0x84,0x04,0x9c,0x08,0x00,0x06,0xdf,0x00,0x00,0x00,0x00,
+0x08,0x00,0x06,0xd7,0xac,0x43,0x00,0x00,0x27,0xbd,0xff,0xe0,0xaf,0xb1,0x00,0x14,
+0xaf,0xbf,0x00,0x18,0x00,0x80,0x88,0x21,0x0c,0x00,0x17,0xd4,0xaf,0xb0,0x00,0x10,
+0x00,0x40,0x20,0x21,0x24,0x02,0xff,0xff,0x10,0x82,0x00,0x1f,0x24,0x03,0x00,0x06,
+0x8f,0x85,0x84,0xbc,0x00,0x00,0x00,0x00,0x14,0xa0,0x00,0x0a,0x24,0x02,0x00,0x08,
+0x24,0x02,0x00,0x02,0x10,0x82,0x00,0x3b,0x28,0x82,0x00,0x03,0x10,0x40,0x00,0x32,
+0x24,0x02,0x00,0x1b,0x24,0x02,0x00,0x01,0x10,0x82,0x00,0x13,0x24,0x03,0x00,0x08,
+0x24,0x02,0x00,0x08,0x10,0x82,0x00,0x23,0x24,0x02,0x00,0x0d,0x10,0x82,0x00,0x18,
+0x02,0x25,0x10,0x21,0x24,0xa3,0x00,0x01,0xa0,0x44,0x00,0x00,0xaf,0x83,0x84,0xbc,
+0x18,0x60,0x00,0x08,0x24,0x02,0x00,0x43,0x82,0x23,0x00,0x00,0x00,0x00,0x00,0x00,
+0x10,0x62,0x00,0x0a,0x00,0x00,0x00,0x00,0x30,0x84,0xff,0xff,0x0c,0x00,0x17,0xd0,
+0x00,0x00,0x00,0x00,0x24,0x03,0x00,0x06,0x8f,0xbf,0x00,0x18,0x7b,0xb0,0x00,0xbc,
+0x00,0x60,0x10,0x21,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x20,0x3c,0x04,0x80,0x01,
+0x0c,0x00,0x17,0xb0,0x24,0x84,0x04,0xb0,0x08,0x00,0x07,0x1e,0x24,0x03,0x00,0x06,
+0xa0,0x40,0x00,0x00,0x24,0xa5,0x00,0x01,0xaf,0x85,0x84,0xbc,0x0c,0x00,0x17,0xd0,
+0x24,0x04,0x00,0x0d,0x24,0x03,0x00,0x07,0xaf,0x80,0x84,0xbc,0x08,0x00,0x07,0x1e,
+0x00,0x00,0x00,0x00,0x18,0xa0,0xff,0xeb,0x24,0xa5,0xff,0xff,0xaf,0x85,0x84,0xbc,
+0x0c,0x00,0x17,0xd0,0x24,0x04,0x00,0x08,0x0c,0x00,0x17,0xd0,0x24,0x04,0x00,0x20,
+0x08,0x00,0x07,0x1b,0x24,0x04,0x00,0x08,0x14,0x82,0xff,0xd2,0x24,0x02,0x00,0x08,
+0x0c,0x00,0x06,0x90,0x00,0x00,0x00,0x00,0x8f,0x85,0x84,0xbc,0x08,0x00,0x07,0x0c,
+0x24,0x04,0x00,0x0d,0x0c,0x00,0x2b,0xd1,0x02,0x20,0x20,0x21,0xaf,0x82,0x84,0xbc,
+0x04,0x40,0x00,0x0d,0x00,0x00,0x80,0x21,0x02,0x30,0x10,0x21,0x90,0x44,0x00,0x00,
+0x26,0x10,0x00,0x01,0x00,0x04,0x26,0x00,0x00,0x04,0x26,0x03,0x0c,0x00,0x17,0xd0,
+0x30,0x84,0xff,0xff,0x8f,0x83,0x84,0xbc,0x00,0x00,0x00,0x00,0x00,0x70,0x18,0x2a,
+0x10,0x60,0xff,0xf6,0x02,0x30,0x10,0x21,0x08,0x00,0x07,0x2e,0x24,0x03,0x00,0x06,
+0x27,0xbd,0xff,0xe8,0xaf,0xbf,0x00,0x10,0x27,0x83,0x8b,0xe8,0x24,0x02,0x00,0x07,
+0x24,0x42,0xff,0xff,0xac,0x60,0x00,0x00,0x04,0x41,0xff,0xfd,0x24,0x63,0x00,0x04,
+0x0c,0x00,0x07,0x66,0x00,0x00,0x00,0x00,0x8f,0x84,0x8b,0xe8,0x27,0x86,0x8b,0xe8,
+0x0c,0x00,0x07,0x83,0x00,0x40,0x28,0x21,0x8f,0xbf,0x00,0x10,0x00,0x00,0x00,0x00,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x18,0x27,0xbd,0xff,0xe0,0x00,0x80,0x28,0x21,
+0x27,0x84,0x8b,0xc8,0xaf,0xb1,0x00,0x14,0xaf,0xbf,0x00,0x18,0x0c,0x00,0x2c,0x62,
+0xaf,0xb0,0x00,0x10,0x8f,0x85,0x83,0x2c,0x27,0x84,0x8b,0xc8,0x0c,0x00,0x2c,0x26,
+0x00,0x00,0x88,0x21,0x10,0x40,0x00,0x0c,0x00,0x00,0x00,0x00,0x27,0x90,0x8b,0xe8,
+0x8f,0x85,0x83,0x2c,0x00,0x00,0x20,0x21,0xae,0x02,0x00,0x00,0x0c,0x00,0x2c,0x26,
+0x26,0x31,0x00,0x01,0x26,0x10,0x00,0x04,0x10,0x40,0x00,0x03,0x2a,0x23,0x00,0x64,
+0x14,0x60,0xff,0xf7,0x00,0x00,0x00,0x00,0x02,0x20,0x10,0x21,0x8f,0xbf,0x00,0x18,
+0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x20,0x27,0xbd,0xff,0xd0,
+0xaf,0xb6,0x00,0x28,0xaf,0xb5,0x00,0x24,0xaf,0xb4,0x00,0x20,0xaf,0xbf,0x00,0x2c,
+0xaf,0xb3,0x00,0x1c,0xaf,0xb2,0x00,0x18,0xaf,0xb1,0x00,0x14,0xaf,0xb0,0x00,0x10,
+0x00,0xa0,0xa8,0x21,0x00,0x80,0xa0,0x21,0x00,0xc0,0xb0,0x21,0x10,0xa0,0x00,0x1d,
+0x24,0x02,0x00,0x05,0x3c,0x02,0x80,0x00,0x24,0x43,0x29,0x1c,0x8f,0x82,0x83,0x9c,
+0x00,0x00,0x00,0x00,0x10,0x43,0x00,0x1e,0x00,0x00,0x88,0x21,0x00,0x60,0x98,0x21,
+0x00,0x00,0x90,0x21,0x27,0x90,0x83,0x9c,0x8e,0x05,0xff,0xec,0x02,0x80,0x20,0x21,
+0x0c,0x00,0x2c,0x6a,0x26,0x10,0x00,0x18,0x10,0x40,0x00,0x06,0x02,0x51,0x18,0x21,
+0x8e,0x02,0x00,0x00,0x26,0x31,0x00,0x01,0x14,0x53,0xff,0xf7,0x00,0x11,0x90,0x40,
+0x02,0x51,0x18,0x21,0x27,0x82,0x83,0x8c,0x00,0x03,0x18,0xc0,0x00,0x62,0x18,0x21,
+0x8c,0x62,0x00,0x10,0x02,0x20,0x20,0x21,0x02,0xa0,0x28,0x21,0x00,0x40,0xf8,0x09,
+0x02,0xc0,0x30,0x21,0x8f,0xbf,0x00,0x2c,0x8f,0xb6,0x00,0x28,0x7b,0xb4,0x01,0x3c,
+0x7b,0xb2,0x00,0xfc,0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x30,
+0x08,0x00,0x07,0xa4,0x00,0x00,0x90,0x21,0x27,0xbd,0xff,0xc0,0xaf,0xb5,0x00,0x34,
+0xaf,0xb3,0x00,0x2c,0xaf,0xb1,0x00,0x24,0xaf,0xbf,0x00,0x38,0xaf,0xb4,0x00,0x30,
+0xaf,0xb2,0x00,0x28,0xaf,0xb0,0x00,0x20,0x00,0xc0,0x98,0x21,0x30,0xa5,0x00,0xff,
+0xac,0xc0,0x00,0x00,0x24,0x15,0x00,0x0a,0x00,0x00,0x88,0x21,0x27,0xa8,0x00,0x10,
+0x00,0x91,0x18,0x21,0x80,0x62,0x00,0x00,0x26,0x27,0x00,0x01,0x10,0x40,0x00,0x0c,
+0x01,0x11,0x30,0x21,0x90,0x63,0x00,0x00,0x30,0xf1,0x00,0xff,0x2e,0x22,0x00,0x0a,
+0x14,0x40,0xff,0xf7,0xa0,0xc3,0x00,0x00,0x8f,0xbf,0x00,0x38,0x7b,0xb4,0x01,0xbc,
+0x7b,0xb2,0x01,0x7c,0x7b,0xb0,0x01,0x3c,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x40,
+0x24,0x02,0x00,0x01,0x10,0xa2,0x00,0x23,0x24,0x02,0x00,0x02,0x10,0xa2,0x00,0x1f,
+0x24,0x02,0x00,0x03,0x10,0xa2,0x00,0x1a,0x00,0x00,0x00,0x00,0x02,0x20,0x90,0x21,
+0x12,0x40,0xff,0xf1,0x00,0x00,0x88,0x21,0x27,0xb4,0x00,0x10,0x02,0x91,0x10,0x21,
+0x90,0x44,0x00,0x00,0x0c,0x00,0x08,0x0a,0x00,0x00,0x00,0x00,0x02,0x51,0x20,0x23,
+0x24,0x84,0xff,0xff,0x30,0x84,0x00,0xff,0x02,0xa0,0x28,0x21,0x0c,0x00,0x07,0xfb,
+0x00,0x40,0x80,0x21,0x02,0x02,0x00,0x18,0x8e,0x63,0x00,0x00,0x26,0x22,0x00,0x01,
+0x30,0x51,0x00,0xff,0x02,0x32,0x20,0x2b,0x00,0x00,0x80,0x12,0x00,0x70,0x18,0x21,
+0x14,0x80,0xff,0xee,0xae,0x63,0x00,0x00,0x08,0x00,0x07,0xce,0x00,0x00,0x00,0x00,
+0x80,0x82,0x00,0x00,0x08,0x00,0x07,0xce,0xae,0x62,0x00,0x00,0x08,0x00,0x07,0xdb,
+0x24,0x15,0x00,0x10,0x08,0x00,0x07,0xdb,0x24,0x15,0x00,0x0a,0x30,0x84,0x00,0xff,
+0x30,0xa5,0x00,0xff,0x24,0x06,0x00,0x01,0x10,0x80,0x00,0x09,0x00,0x00,0x10,0x21,
+0x00,0xc5,0x00,0x18,0x24,0x42,0x00,0x01,0x30,0x42,0x00,0xff,0x00,0x44,0x18,0x2b,
+0x00,0x00,0x30,0x12,0x00,0x00,0x00,0x00,0x14,0x60,0xff,0xfa,0x00,0xc5,0x00,0x18,
+0x03,0xe0,0x00,0x08,0x00,0xc0,0x10,0x21,0x30,0x84,0x00,0xff,0x24,0x83,0xff,0xd0,
+0x30,0x62,0x00,0xff,0x2c,0x42,0x00,0x0a,0x14,0x40,0x00,0x06,0x00,0x00,0x00,0x00,
+0x24,0x82,0xff,0xbf,0x2c,0x42,0x00,0x06,0x14,0x40,0x00,0x02,0x24,0x83,0xff,0xc9,
+0x24,0x83,0xff,0xa9,0x03,0xe0,0x00,0x08,0x00,0x60,0x10,0x21,0x27,0xbd,0xff,0xc8,
+0x24,0x02,0x00,0x01,0xaf,0xbf,0x00,0x30,0xaf,0xb5,0x00,0x2c,0xaf,0xb4,0x00,0x28,
+0xaf,0xb3,0x00,0x24,0xaf,0xb2,0x00,0x20,0xaf,0xb1,0x00,0x1c,0x10,0xa2,0x00,0x3e,
+0xaf,0xb0,0x00,0x18,0x24,0x02,0x00,0x02,0x10,0xa2,0x00,0x08,0x24,0x05,0x00,0x01,
+0x00,0x00,0x10,0x21,0x8f,0xbf,0x00,0x30,0x7b,0xb4,0x01,0x7c,0x7b,0xb2,0x01,0x3c,
+0x7b,0xb0,0x00,0xfc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x38,0x8c,0xc4,0x00,0x04,
+0x0c,0x00,0x07,0xb6,0x27,0xa6,0x00,0x10,0x8f,0xa2,0x00,0x10,0x00,0x00,0x00,0x00,
+0x28,0x42,0x00,0x65,0x14,0x40,0x00,0x06,0x00,0x00,0x00,0x00,0x3c,0x04,0x80,0x01,
+0x0c,0x00,0x17,0xb0,0x24,0x84,0x04,0xb4,0x08,0x00,0x08,0x25,0x24,0x02,0x00,0x01,
+0x3c,0x04,0x80,0x01,0x0c,0x00,0x17,0xb0,0x24,0x84,0x04,0xc0,0x8f,0x83,0x83,0x9c,
+0x3c,0x02,0x80,0x00,0x24,0x42,0x29,0x1c,0x10,0x62,0xff,0xe5,0x00,0x40,0x90,0x21,
+0x3c,0x13,0x80,0x01,0x27,0x95,0x83,0x88,0x3c,0x14,0x80,0x01,0x27,0x90,0x83,0x8c,
+0x00,0x00,0x88,0x21,0x8e,0x03,0x00,0x08,0x8f,0xa2,0x00,0x10,0x00,0x00,0x00,0x00,
+0x10,0x62,0x00,0x08,0x26,0x64,0x04,0xcc,0x26,0x10,0x00,0x18,0x8e,0x02,0x00,0x10,
+0x00,0x00,0x00,0x00,0x14,0x52,0xff,0xf7,0x26,0x31,0x00,0x18,0x08,0x00,0x08,0x25,
+0x00,0x00,0x10,0x21,0x0c,0x00,0x17,0xb0,0x00,0x00,0x00,0x00,0x02,0x35,0x10,0x21,
+0x8c,0x44,0x00,0x00,0x0c,0x00,0x17,0xb0,0x00,0x00,0x00,0x00,0x0c,0x00,0x17,0xb0,
+0x26,0x84,0x04,0xd0,0x8e,0x04,0x00,0x00,0x0c,0x00,0x17,0xb0,0x26,0x10,0x00,0x18,
+0x08,0x00,0x08,0x4b,0x00,0x00,0x00,0x00,0x3c,0x04,0x80,0x01,0x0c,0x00,0x17,0xb0,
+0x24,0x84,0x04,0xd4,0x3c,0x04,0x80,0x01,0x0c,0x00,0x17,0x9d,0x24,0x84,0x04,0xe4,
+0x24,0x11,0x00,0x05,0x3c,0x12,0x80,0x01,0x27,0x90,0x88,0x8e,0x86,0x05,0x00,0x00,
+0x26,0x44,0x05,0x04,0x0c,0x00,0x17,0x9d,0x26,0x31,0xff,0xff,0x06,0x21,0xff,0xfb,
+0x26,0x10,0xff,0xfe,0x08,0x00,0x08,0x25,0x00,0x00,0x10,0x21,0x27,0xbd,0xff,0xd0,
+0x28,0xa2,0x00,0x02,0xaf,0xb1,0x00,0x1c,0xaf,0xb0,0x00,0x18,0xaf,0xbf,0x00,0x2c,
+0xaf,0xb4,0x00,0x28,0xaf,0xb3,0x00,0x24,0xaf,0xb2,0x00,0x20,0x00,0xa0,0x80,0x21,
+0x14,0x40,0x00,0x51,0x00,0xc0,0x88,0x21,0x8c,0xc4,0x00,0x04,0x24,0x05,0x00,0x02,
+0x0c,0x00,0x07,0xb6,0x27,0xa6,0x00,0x10,0x24,0x02,0x00,0x02,0x12,0x02,0x00,0x48,
+0x24,0x05,0x00,0x01,0x8e,0x24,0x00,0x08,0x0c,0x00,0x07,0xb6,0x27,0xa6,0x00,0x14,
+0x8f,0xa2,0x00,0x14,0x00,0x00,0x00,0x00,0x30,0x42,0x0f,0xff,0xaf,0xa2,0x00,0x14,
+0x7b,0xa4,0x00,0xbc,0x0c,0x00,0x09,0x06,0x24,0x06,0x00,0x04,0x24,0x03,0x00,0x04,
+0x10,0x43,0x00,0x2a,0x24,0x04,0x00,0x04,0x8f,0xa2,0x00,0x10,0x3c,0x04,0x80,0x01,
+0x24,0x84,0x05,0x08,0x00,0x02,0x19,0x02,0x00,0x03,0x81,0x00,0x8f,0xa3,0x00,0x14,
+0x00,0x50,0x10,0x23,0x00,0x02,0x10,0x82,0x00,0x62,0x18,0x21,0x0c,0x00,0x17,0xb0,
+0xaf,0xa3,0x00,0x14,0x3c,0x04,0x80,0x01,0x0c,0x00,0x17,0xb0,0x24,0x84,0x05,0x30,
+0x8f,0xa2,0x00,0x14,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x17,0x00,0x00,0x88,0x21,
+0x3c,0x13,0x80,0x01,0x3c,0x12,0x80,0x01,0x3c,0x14,0x80,0x01,0x0c,0x00,0x29,0xa1,
+0x24,0x04,0x27,0x10,0x32,0x23,0x00,0x03,0x02,0x00,0x28,0x21,0x10,0x60,0x00,0x1c,
+0x26,0x64,0x05,0x5c,0x8f,0xa2,0x00,0x10,0x00,0x00,0x00,0x00,0x02,0x02,0x10,0x23,
+0x28,0x42,0xff,0xfd,0x10,0x40,0x00,0x10,0x26,0x44,0x05,0x68,0x0c,0x00,0x17,0xb0,
+0x26,0x10,0x00,0x04,0x8f,0xa2,0x00,0x14,0x26,0x31,0x00,0x01,0x02,0x22,0x10,0x2b,
+0x14,0x40,0xff,0xee,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x21,0x8f,0xbf,0x00,0x2c,
+0x8f,0xb4,0x00,0x28,0x7b,0xb2,0x01,0x3c,0x7b,0xb0,0x00,0xfc,0x00,0x80,0x10,0x21,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x30,0x8e,0x05,0x00,0x00,0x26,0x84,0x05,0x6c,
+0x0c,0x00,0x17,0x9d,0x26,0x10,0x00,0x04,0x08,0x00,0x08,0xb1,0x00,0x00,0x00,0x00,
+0x0c,0x00,0x17,0x9d,0x00,0x00,0x00,0x00,0x08,0x00,0x08,0xa9,0x00,0x00,0x00,0x00,
+0x08,0x00,0x08,0x87,0x24,0x02,0x00,0x01,0x0c,0x00,0x0a,0x52,0x00,0x00,0x00,0x00,
+0x08,0x00,0x08,0xb7,0x24,0x04,0x00,0x04,0x27,0xbd,0xff,0xd0,0x28,0xa2,0x00,0x03,
+0xaf,0xb1,0x00,0x24,0xaf,0xb0,0x00,0x20,0xaf,0xbf,0x00,0x28,0x00,0xa0,0x88,0x21,
+0x10,0x40,0x00,0x09,0x00,0xc0,0x80,0x21,0x0c,0x00,0x0a,0x52,0x00,0x00,0x00,0x00,
+0x24,0x04,0x00,0x04,0x8f,0xbf,0x00,0x28,0x7b,0xb0,0x01,0x3c,0x00,0x80,0x10,0x21,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x30,0x8c,0xc4,0x00,0x04,0x24,0x05,0x00,0x02,
+0x0c,0x00,0x07,0xb6,0x27,0xa6,0x00,0x10,0x8e,0x04,0x00,0x08,0x24,0x05,0x00,0x02,
+0x0c,0x00,0x07,0xb6,0x27,0xa6,0x00,0x14,0x24,0x02,0x00,0x03,0x12,0x22,0x00,0x1b,
+0x24,0x05,0x00,0x01,0x8e,0x04,0x00,0x0c,0x0c,0x00,0x07,0xb6,0x27,0xa6,0x00,0x18,
+0x8f,0xa4,0x00,0x10,0x8f,0xa5,0x00,0x18,0x0c,0x00,0x09,0x06,0x24,0x06,0x00,0x04,
+0x24,0x03,0x00,0x04,0x10,0x43,0xff,0xe7,0x24,0x04,0x00,0x04,0x8f,0xa2,0x00,0x18,
+0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x0b,0x00,0x00,0x28,0x21,0x8f,0xa2,0x00,0x10,
+0x8f,0xa4,0x00,0x14,0x24,0xa5,0x00,0x01,0xac,0x44,0x00,0x00,0x8f,0xa3,0x00,0x10,
+0x8f,0xa2,0x00,0x18,0x24,0x63,0x00,0x04,0x00,0xa2,0x10,0x2b,0x14,0x40,0xff,0xf7,
+0xaf,0xa3,0x00,0x10,0x08,0x00,0x08,0xd9,0x00,0x00,0x20,0x21,0x24,0x02,0x00,0x01,
+0x08,0x00,0x08,0xec,0xaf,0xa2,0x00,0x18,0x30,0xc6,0x00,0xff,0x00,0xa6,0x00,0x18,
+0x00,0x00,0x28,0x12,0x04,0x81,0x00,0x07,0x00,0x00,0x30,0x21,0x3c,0x02,0x80,0x01,
+0x00,0x85,0x18,0x21,0x34,0x42,0x7f,0xff,0x00,0x43,0x10,0x2b,0x10,0x40,0x00,0x0b,
+0x3c,0x02,0xb0,0x03,0x3c,0x02,0xaf,0xff,0x34,0x42,0xff,0xff,0x00,0x44,0x10,0x2b,
+0x10,0x40,0x00,0x17,0x3c,0x02,0xb0,0x0a,0x00,0x85,0x18,0x21,0x34,0x42,0xff,0xff,
+0x00,0x43,0x10,0x2b,0x14,0x40,0x00,0x12,0x3c,0x02,0xb0,0x03,0x34,0x42,0xff,0xff,
+0x00,0x44,0x10,0x2b,0x10,0x40,0x00,0x06,0x3c,0x02,0xb0,0x07,0x3c,0x02,0xb0,0x04,
+0x34,0x42,0xff,0xff,0x00,0x43,0x10,0x2b,0x10,0x40,0x00,0x09,0x3c,0x02,0xb0,0x07,
+0x34,0x42,0x00,0x3f,0x00,0x44,0x10,0x2b,0x10,0x40,0x00,0x06,0x3c,0x02,0xb0,0x07,
+0x34,0x42,0xff,0xff,0x00,0x43,0x10,0x2b,0x14,0x40,0x00,0x02,0x00,0x00,0x00,0x00,
+0x24,0x06,0x00,0x01,0x14,0xc0,0x00,0x11,0x24,0x02,0x00,0x04,0x3c,0x02,0xb0,0x08,
+0x34,0x42,0x0f,0xff,0x00,0x44,0x10,0x2b,0x14,0x40,0x00,0x08,0x3c,0x02,0x4f,0xf7,
+0x00,0x85,0x20,0x21,0x34,0x42,0xf0,0x00,0x00,0x82,0x20,0x21,0x34,0x03,0xef,0xff,
+0x00,0x64,0x18,0x2b,0x14,0x60,0x00,0x02,0x00,0x00,0x00,0x00,0x24,0x06,0x00,0x02,
+0x10,0xc0,0x00,0x02,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x04,0x03,0xe0,0x00,0x08,
+0x00,0x00,0x00,0x00,0x27,0xbd,0xff,0xe0,0x24,0x02,0x00,0x02,0xaf,0xb0,0x00,0x18,
+0xaf,0xbf,0x00,0x1c,0x10,0xa2,0x00,0x23,0x00,0xc0,0x80,0x21,0x28,0xa2,0x00,0x03,
+0x10,0x40,0x00,0x0c,0x24,0x02,0x00,0x03,0x24,0x02,0x00,0x01,0x10,0xa2,0x00,0x04,
+0x00,0x00,0x18,0x21,0x0c,0x00,0x0a,0x52,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x21,
+0x8f,0xbf,0x00,0x1c,0x8f,0xb0,0x00,0x18,0x00,0x60,0x10,0x21,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x20,0x14,0xa2,0xff,0xf7,0x24,0x05,0x00,0x01,0x8c,0xc4,0x00,0x04,
+0x0c,0x00,0x07,0xb6,0x27,0xa6,0x00,0x10,0x8e,0x04,0x00,0x08,0x24,0x05,0x00,0x02,
+0x0c,0x00,0x07,0xb6,0x27,0xa6,0x00,0x14,0x8f,0xa4,0x00,0x10,0x00,0x00,0x00,0x00,
+0x2c,0x82,0x00,0x0b,0x10,0x40,0xff,0xee,0x24,0x03,0x00,0x04,0x00,0x04,0x10,0x80,
+0x8f,0xa4,0x00,0x14,0x27,0x83,0x91,0xc0,0x00,0x43,0x10,0x21,0x08,0x00,0x09,0x4f,
+0xac,0x44,0x00,0x00,0x8c,0xc4,0x00,0x04,0x24,0x05,0x00,0x01,0x0c,0x00,0x07,0xb6,
+0x27,0xa6,0x00,0x10,0x8f,0xa5,0x00,0x10,0x27,0x83,0x91,0xc0,0x3c,0x04,0x80,0x01,
+0x00,0x05,0x10,0x80,0x00,0x43,0x10,0x21,0x8c,0x46,0x00,0x00,0x0c,0x00,0x17,0x9d,
+0x24,0x84,0x05,0x74,0x08,0x00,0x09,0x50,0x00,0x00,0x18,0x21,0x03,0xe0,0x00,0x08,
+0x00,0x00,0x00,0x00,0x8f,0x82,0x92,0x10,0x27,0xbd,0xff,0xe8,0xaf,0xbf,0x00,0x10,
+0x8c,0x45,0x00,0x24,0x3c,0x04,0x80,0x01,0x0c,0x00,0x17,0x9d,0x24,0x84,0x05,0x88,
+0x8f,0x83,0x92,0x10,0x3c,0x04,0x80,0x01,0x8c,0x65,0x00,0x28,0x0c,0x00,0x17,0x9d,
+0x24,0x84,0x05,0x9c,0x8f,0x83,0x92,0x10,0x3c,0x04,0x80,0x01,0x8c,0x65,0x00,0x2c,
+0x0c,0x00,0x17,0x9d,0x24,0x84,0x05,0xb0,0x8f,0x83,0x92,0x10,0x3c,0x04,0x80,0x01,
+0x8c,0x65,0x00,0x30,0x0c,0x00,0x17,0x9d,0x24,0x84,0x05,0xc4,0x8f,0x83,0x92,0x10,
+0x3c,0x04,0x80,0x01,0x8c,0x65,0x00,0x34,0x0c,0x00,0x17,0x9d,0x24,0x84,0x05,0xd8,
+0x8f,0x83,0x92,0x10,0x3c,0x04,0x80,0x01,0x8c,0x65,0x00,0x38,0x0c,0x00,0x17,0x9d,
+0x24,0x84,0x05,0xec,0x8f,0x83,0x92,0x10,0x3c,0x04,0x80,0x01,0x8c,0x65,0x00,0x3c,
+0x0c,0x00,0x17,0x9d,0x24,0x84,0x05,0xfc,0x8f,0xbf,0x00,0x10,0x00,0x00,0x00,0x00,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x18,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,
+0x27,0xbd,0xff,0xb8,0x28,0xa5,0x00,0x04,0xaf,0xb0,0x00,0x20,0xaf,0xbf,0x00,0x40,
+0xaf,0xb7,0x00,0x3c,0xaf,0xb6,0x00,0x38,0xaf,0xb5,0x00,0x34,0xaf,0xb4,0x00,0x30,
+0xaf,0xb3,0x00,0x2c,0xaf,0xb2,0x00,0x28,0xaf,0xb1,0x00,0x24,0x10,0xa0,0x00,0x0b,
+0x00,0xc0,0x80,0x21,0x0c,0x00,0x0a,0x52,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x04,
+0x8f,0xbf,0x00,0x40,0x7b,0xb6,0x01,0xfc,0x7b,0xb4,0x01,0xbc,0x7b,0xb2,0x01,0x7c,
+0x7b,0xb0,0x01,0x3c,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x48,0x8c,0xc4,0x00,0x04,
+0x24,0x05,0x00,0x01,0x0c,0x00,0x07,0xb6,0x27,0xa6,0x00,0x10,0x8e,0x04,0x00,0x08,
+0x24,0x05,0x00,0x01,0x0c,0x00,0x07,0xb6,0x27,0xa6,0x00,0x14,0x8e,0x04,0x00,0x0c,
+0x24,0x05,0x00,0x01,0x0c,0x00,0x07,0xb6,0x27,0xa6,0x00,0x18,0x8f,0xa3,0x00,0x18,
+0x00,0x00,0x00,0x00,0x10,0x60,0x00,0x3a,0x24,0x02,0x00,0x01,0x10,0x62,0x00,0x33,
+0x3c,0x04,0x80,0x01,0x97,0xb0,0x00,0x12,0x8f,0xa2,0x00,0x14,0x00,0x00,0x00,0x00,
+0x02,0x02,0x10,0x2b,0x10,0x40,0xff,0xe2,0x3c,0x15,0x80,0x01,0x3c,0x02,0x80,0x01,
+0x24,0x52,0x06,0x3c,0x3c,0x14,0xb0,0x06,0x24,0x13,0x00,0x01,0x3c,0x17,0xb0,0x08,
+0x3c,0x16,0x80,0x01,0x32,0x02,0x00,0x01,0x02,0x00,0x28,0x21,0x10,0x40,0x00,0x1f,
+0x26,0xa4,0x06,0x30,0x8f,0xa3,0x00,0x18,0x00,0x10,0x10,0xc0,0x00,0x54,0x10,0x21,
+0x10,0x60,0x00,0x14,0x02,0x40,0x20,0x21,0x00,0x10,0x10,0xc0,0x00,0x57,0x10,0x21,
+0x10,0x73,0x00,0x09,0x26,0xc4,0x06,0x44,0x8f,0xa2,0x00,0x14,0x26,0x03,0x00,0x01,
+0x30,0x70,0xff,0xff,0x02,0x02,0x10,0x2b,0x14,0x40,0xff,0xee,0x00,0x00,0x00,0x00,
+0x08,0x00,0x09,0xb4,0x00,0x00,0x00,0x00,0x8c,0x51,0x00,0x00,0x00,0x00,0x00,0x00,
+0x32,0x25,0x00,0xff,0x0c,0x00,0x17,0x9d,0x00,0x00,0x00,0x00,0x08,0x00,0x09,0xe6,
+0x00,0x00,0x00,0x00,0x8c,0x51,0x00,0x00,0x0c,0x00,0x17,0x9d,0x00,0x11,0x2c,0x02,
+0x32,0x25,0x00,0xff,0x08,0x00,0x09,0xf1,0x02,0x40,0x20,0x21,0x0c,0x00,0x17,0x9d,
+0x00,0x00,0x00,0x00,0x08,0x00,0x09,0xdd,0x00,0x00,0x00,0x00,0x24,0x84,0x06,0x10,
+0x0c,0x00,0x17,0xb0,0x00,0x00,0x00,0x00,0x08,0x00,0x09,0xcd,0x00,0x00,0x00,0x00,
+0x3c,0x04,0x80,0x01,0x08,0x00,0x0a,0x00,0x24,0x84,0x06,0x50,0x00,0xa0,0x10,0x21,
+0x27,0xbd,0xff,0xd8,0x28,0x42,0x00,0x04,0xaf,0xb0,0x00,0x20,0xaf,0xbf,0x00,0x24,
+0x00,0xc0,0x80,0x21,0x24,0x05,0x00,0x01,0x10,0x40,0x00,0x08,0x27,0xa6,0x00,0x10,
+0x0c,0x00,0x0a,0x52,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x04,0x8f,0xbf,0x00,0x24,
+0x8f,0xb0,0x00,0x20,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x28,0x8e,0x04,0x00,0x04,
+0x0c,0x00,0x07,0xb6,0x00,0x00,0x00,0x00,0x8e,0x04,0x00,0x08,0x24,0x05,0x00,0x01,
+0x0c,0x00,0x07,0xb6,0x27,0xa6,0x00,0x14,0x8e,0x04,0x00,0x0c,0x24,0x05,0x00,0x01,
+0x0c,0x00,0x07,0xb6,0x27,0xa6,0x00,0x18,0x08,0x00,0x0a,0x13,0x24,0x02,0x00,0x01,
+0x24,0x03,0x00,0x01,0x00,0x65,0x10,0x2a,0x27,0xbd,0xff,0xd8,0x00,0xa0,0x40,0x21,
+0x10,0x40,0x00,0x0b,0x00,0xc0,0x38,0x21,0x00,0x03,0x20,0x80,0x00,0x87,0x10,0x21,
+0x8c,0x45,0x00,0x00,0x24,0x63,0x00,0x01,0x30,0x63,0x00,0xff,0x8c,0xa6,0x00,0x00,
+0x00,0x9d,0x20,0x21,0x00,0x68,0x10,0x2a,0x14,0x40,0xff,0xf7,0xac,0x86,0xff,0xfc,
+0x8f,0xa3,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x60,0x00,0x0b,0x00,0x00,0x00,0x00,
+0x24,0x02,0x00,0x02,0x10,0x62,0x00,0x03,0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x28,0x93,0xa2,0x00,0x07,0x00,0x00,0x00,0x00,0xa3,0x82,0x87,0xec,
+0x08,0x00,0x0a,0x3b,0x00,0x00,0x00,0x00,0x93,0xa2,0x00,0x07,0x00,0x00,0x00,0x00,
+0xa3,0x82,0x91,0xb0,0x08,0x00,0x0a,0x3b,0x00,0x00,0x00,0x00,0x27,0xbd,0xff,0xe8,
+0x3c,0x04,0x80,0x01,0xaf,0xbf,0x00,0x10,0x18,0xa0,0x00,0x03,0x24,0x84,0x06,0x78,
+0x0c,0x00,0x17,0xb0,0x00,0x00,0x00,0x00,0x8f,0xbf,0x00,0x10,0x24,0x02,0x00,0x01,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x18,0x27,0xbd,0xff,0xe8,0xaf,0xb0,0x00,0x10,
+0x00,0x80,0x80,0x21,0x3c,0x04,0x80,0x01,0xaf,0xbf,0x00,0x14,0x0c,0x00,0x17,0xb0,
+0x24,0x84,0x06,0x8c,0x00,0x10,0x10,0x40,0x00,0x50,0x10,0x21,0x27,0x83,0x83,0x88,
+0x00,0x02,0x10,0xc0,0x00,0x43,0x10,0x21,0x8c,0x44,0x00,0x08,0x0c,0x00,0x17,0xb0,
+0x00,0x00,0x00,0x00,0x8f,0xbf,0x00,0x14,0x8f,0xb0,0x00,0x10,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x18,0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,0x27,0xbd,0xff,0xe8,
+0x34,0x63,0x00,0x20,0x24,0x42,0x29,0x94,0x3c,0x04,0xb0,0x03,0xaf,0xbf,0x00,0x14,
+0xac,0x62,0x00,0x00,0xaf,0xb0,0x00,0x10,0x34,0x84,0x00,0x2c,0x8c,0x83,0x00,0x00,
+0xa7,0x80,0xc2,0x40,0x00,0x03,0x12,0x02,0x00,0x03,0x2d,0x02,0x30,0x42,0x0f,0xff,
+0xa3,0x83,0xc2,0x48,0xa7,0x85,0xc2,0x4c,0xa7,0x82,0xc2,0x4a,0xa7,0x80,0xc2,0x42,
+0xa7,0x80,0xc2,0x44,0xa7,0x80,0xc2,0x46,0x0c,0x00,0x0b,0xfa,0x24,0x04,0x05,0x00,
+0x3c,0x05,0x08,0x00,0x00,0x45,0x28,0x25,0x24,0x04,0x05,0x00,0x0c,0x00,0x0b,0xed,
+0x00,0x40,0x80,0x21,0x3c,0x02,0xf7,0xff,0x34,0x42,0xff,0xff,0x02,0x02,0x80,0x24,
+0x02,0x00,0x28,0x21,0x0c,0x00,0x0b,0xed,0x24,0x04,0x05,0x00,0x3c,0x02,0xb0,0x03,
+0x3c,0x03,0xb0,0x03,0x34,0x42,0x01,0x08,0x34,0x63,0x01,0x18,0x8c,0x45,0x00,0x00,
+0x8c,0x64,0x00,0x00,0x3c,0x02,0x00,0x0f,0x3c,0x03,0x00,0x4c,0x30,0x84,0x02,0x00,
+0x34,0x63,0x4b,0x40,0xaf,0x85,0xc2,0x50,0x10,0x80,0x00,0x06,0x34,0x42,0x42,0x40,
+0xaf,0x83,0xc2,0x54,0x8f,0xbf,0x00,0x14,0x8f,0xb0,0x00,0x10,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x18,0xaf,0x82,0xc2,0x54,0x08,0x00,0x0a,0x95,0x00,0x00,0x00,0x00,
+0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,0x27,0xbd,0xff,0xc8,0x34,0x63,0x00,0x20,
+0x24,0x42,0x2a,0x70,0x30,0x84,0x00,0xff,0xaf,0xbf,0x00,0x30,0xaf,0xb7,0x00,0x2c,
+0xaf,0xb6,0x00,0x28,0xaf,0xb5,0x00,0x24,0xaf,0xb4,0x00,0x20,0xaf,0xb3,0x00,0x1c,
+0xaf,0xb2,0x00,0x18,0xaf,0xb1,0x00,0x14,0xaf,0xb0,0x00,0x10,0xac,0x62,0x00,0x00,
+0x10,0x80,0x00,0x1c,0x24,0x02,0x00,0x02,0x10,0x82,0x00,0x08,0x00,0x00,0x00,0x00,
+0x8f,0xbf,0x00,0x30,0x7b,0xb6,0x01,0x7c,0x7b,0xb4,0x01,0x3c,0x7b,0xb2,0x00,0xfc,
+0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x38,0xa7,0x80,0xc2,0x40,
+0xa7,0x80,0xc2,0x42,0xa7,0x80,0xc2,0x44,0xa7,0x80,0xc2,0x46,0x0c,0x00,0x0b,0xfa,
+0x24,0x04,0x05,0x00,0x3c,0x05,0x08,0x00,0x00,0x45,0x28,0x25,0x24,0x04,0x05,0x00,
+0x0c,0x00,0x0b,0xed,0x00,0x40,0x80,0x21,0x3c,0x05,0xf7,0xff,0x34,0xa5,0xff,0xff,
+0x02,0x05,0x28,0x24,0x0c,0x00,0x0b,0xed,0x24,0x04,0x05,0x00,0x08,0x00,0x0a,0xb0,
+0x00,0x00,0x00,0x00,0x0c,0x00,0x0b,0xfa,0x24,0x04,0x05,0xa0,0x24,0x04,0x05,0xa4,
+0x0c,0x00,0x0b,0xfa,0x00,0x02,0xbc,0x02,0x24,0x04,0x05,0xa8,0x00,0x02,0xb4,0x02,
+0x0c,0x00,0x0b,0xfa,0x30,0x55,0xff,0xff,0x00,0x40,0x80,0x21,0x97,0x84,0xc2,0x40,
+0x97,0x82,0xc2,0x42,0x97,0x83,0xc2,0x46,0x02,0xe4,0x20,0x23,0x02,0xa2,0x10,0x23,
+0x00,0x82,0x20,0x21,0x97,0x82,0xc2,0x44,0x32,0x14,0xff,0xff,0x02,0x83,0x18,0x23,
+0x02,0xc2,0x10,0x23,0x00,0x82,0x20,0x21,0x93,0x82,0xc2,0x48,0x00,0x83,0x20,0x21,
+0x30,0x84,0xff,0xff,0x00,0x82,0x10,0x2b,0x14,0x40,0x00,0xaa,0x00,0x00,0x00,0x00,
+0x97,0x82,0xc2,0x4c,0x00,0x00,0x00,0x00,0x00,0x44,0x10,0x2b,0x14,0x40,0x00,0x7f,
+0x00,0x00,0x00,0x00,0x97,0x82,0xc2,0x4a,0x00,0x00,0x00,0x00,0x00,0x44,0x10,0x2b,
+0x10,0x40,0x00,0x3a,0x00,0x00,0x00,0x00,0x0c,0x00,0x0b,0xfa,0x24,0x04,0x04,0x50,
+0x30,0x51,0x00,0x7f,0x00,0x40,0x80,0x21,0x2e,0x22,0x00,0x32,0x10,0x40,0x00,0x13,
+0x24,0x02,0x00,0x20,0x12,0x22,0x00,0x17,0x24,0x02,0xff,0x80,0x02,0x02,0x10,0x24,
+0x26,0x31,0x00,0x01,0x00,0x51,0x80,0x25,0x02,0x00,0x28,0x21,0x0c,0x00,0x0b,0xed,
+0x24,0x04,0x04,0x50,0x02,0x00,0x28,0x21,0x0c,0x00,0x0b,0xed,0x24,0x04,0x04,0x58,
+0x02,0x00,0x28,0x21,0x0c,0x00,0x0b,0xed,0x24,0x04,0x04,0x60,0x02,0x00,0x28,0x21,
+0x24,0x04,0x04,0x68,0x0c,0x00,0x0b,0xed,0x00,0x00,0x00,0x00,0xa7,0x97,0xc2,0x40,
+0xa7,0x95,0xc2,0x42,0xa7,0x96,0xc2,0x44,0xa7,0x94,0xc2,0x46,0x08,0x00,0x0a,0xb0,
+0x00,0x00,0x00,0x00,0x0c,0x00,0x0b,0xfa,0x24,0x04,0x02,0x08,0x3c,0x04,0x00,0xc0,
+0x00,0x40,0x28,0x21,0x00,0x44,0x10,0x24,0x00,0x02,0x15,0x82,0x24,0x03,0x00,0x03,
+0x10,0x43,0x00,0x07,0x00,0x00,0x00,0x00,0x3c,0x02,0xff,0x3f,0x34,0x42,0xff,0xff,
+0x00,0xa2,0x10,0x24,0x00,0x44,0x28,0x25,0x0c,0x00,0x0b,0xed,0x24,0x04,0x02,0x08,
+0x0c,0x00,0x0b,0xfa,0x24,0x04,0x02,0x2c,0x00,0x40,0x90,0x21,0x3c,0x02,0xff,0xff,
+0x34,0x42,0x3f,0xff,0x02,0x42,0x90,0x24,0x02,0x40,0x28,0x21,0x0c,0x00,0x0b,0xed,
+0x24,0x04,0x02,0x2c,0x08,0x00,0x0a,0xf7,0x24,0x02,0xff,0x80,0x0c,0x00,0x0b,0xfa,
+0x24,0x04,0x04,0x50,0x30,0x51,0x00,0x7f,0x24,0x02,0x00,0x20,0x16,0x22,0xff,0xdb,
+0x00,0x00,0x00,0x00,0x0c,0x00,0x0b,0xfa,0x24,0x04,0x02,0x2c,0x34,0x52,0x40,0x00,
+0x02,0x40,0x28,0x21,0x0c,0x00,0x0b,0xed,0x24,0x04,0x02,0x2c,0x0c,0x00,0x0b,0xfa,
+0x24,0x04,0x02,0x58,0x24,0x04,0x02,0x5c,0x0c,0x00,0x0b,0xfa,0x00,0x02,0x9e,0x02,
+0x30,0x43,0x00,0xff,0x00,0x13,0x12,0x00,0x00,0x43,0x10,0x25,0x2c,0x43,0x00,0x04,
+0x14,0x60,0x00,0x1d,0x2c,0x42,0x00,0x11,0x10,0x40,0x00,0x0b,0x00,0x00,0x00,0x00,
+0x3c,0x02,0xff,0xff,0x34,0x42,0x3f,0xff,0x02,0x42,0x90,0x24,0x02,0x40,0x28,0x21,
+0x24,0x04,0x02,0x2c,0x0c,0x00,0x0b,0xed,0x36,0x52,0x80,0x00,0x02,0x40,0x28,0x21,
+0x08,0x00,0x0b,0x05,0x24,0x04,0x02,0x2c,0x0c,0x00,0x0b,0xfa,0x24,0x04,0x02,0x08,
+0x3c,0x04,0x00,0xc0,0x00,0x40,0x28,0x21,0x00,0x44,0x10,0x24,0x00,0x02,0x15,0x82,
+0x24,0x03,0x00,0x02,0x14,0x43,0xff,0xee,0x3c,0x02,0xff,0x3f,0x34,0x42,0xff,0xff,
+0x00,0xa2,0x10,0x24,0x00,0x44,0x28,0x25,0x0c,0x00,0x0b,0xed,0x24,0x04,0x02,0x08,
+0x08,0x00,0x0b,0x41,0x3c,0x02,0xff,0xff,0x0c,0x00,0x0b,0xfa,0x24,0x04,0x02,0x08,
+0x00,0x40,0x28,0x21,0x00,0x02,0x15,0x82,0x30,0x42,0x00,0x03,0x24,0x03,0x00,0x03,
+0x14,0x43,0xff,0xdf,0x3c,0x02,0xff,0x3f,0x34,0x42,0xff,0xff,0x00,0xa2,0x10,0x24,
+0x3c,0x03,0x00,0x80,0x08,0x00,0x0b,0x56,0x00,0x43,0x28,0x25,0x0c,0x00,0x0b,0xfa,
+0x24,0x04,0x04,0x50,0x30,0x51,0x00,0x7f,0x00,0x40,0x80,0x21,0x2e,0x22,0x00,0x32,
+0x10,0x40,0xff,0x9a,0x24,0x02,0x00,0x20,0x12,0x22,0x00,0x04,0x24,0x02,0xff,0x80,
+0x02,0x02,0x10,0x24,0x08,0x00,0x0a,0xf9,0x26,0x31,0x00,0x02,0x0c,0x00,0x0b,0xfa,
+0x24,0x04,0x02,0x08,0x3c,0x04,0x00,0xc0,0x00,0x40,0x28,0x21,0x00,0x44,0x10,0x24,
+0x00,0x02,0x15,0x82,0x24,0x03,0x00,0x03,0x10,0x43,0x00,0x07,0x00,0x00,0x00,0x00,
+0x3c,0x02,0xff,0x3f,0x34,0x42,0xff,0xff,0x00,0xa2,0x10,0x24,0x00,0x44,0x28,0x25,
+0x0c,0x00,0x0b,0xed,0x24,0x04,0x02,0x08,0x0c,0x00,0x0b,0xfa,0x24,0x04,0x02,0x2c,
+0x00,0x40,0x90,0x21,0x3c,0x02,0xff,0xff,0x34,0x42,0x3f,0xff,0x02,0x42,0x90,0x24,
+0x02,0x40,0x28,0x21,0x0c,0x00,0x0b,0xed,0x24,0x04,0x02,0x2c,0x08,0x00,0x0b,0x70,
+0x24,0x02,0xff,0x80,0x0c,0x00,0x0b,0xfa,0x24,0x04,0x04,0x50,0x00,0x40,0x80,0x21,
+0x30,0x51,0x00,0x7f,0x24,0x02,0x00,0x20,0x12,0x22,0x00,0x1d,0x2e,0x22,0x00,0x21,
+0x14,0x40,0xff,0x72,0x24,0x02,0xff,0x80,0x02,0x02,0x10,0x24,0x26,0x31,0xff,0xff,
+0x00,0x51,0x80,0x25,0x24,0x04,0x04,0x50,0x0c,0x00,0x0b,0xed,0x02,0x00,0x28,0x21,
+0x24,0x04,0x04,0x58,0x0c,0x00,0x0b,0xed,0x02,0x00,0x28,0x21,0x24,0x04,0x04,0x60,
+0x0c,0x00,0x0b,0xed,0x02,0x00,0x28,0x21,0x02,0x00,0x28,0x21,0x0c,0x00,0x0b,0xed,
+0x24,0x04,0x04,0x68,0x24,0x02,0x00,0x20,0x16,0x22,0xff,0x60,0x00,0x00,0x00,0x00,
+0x0c,0x00,0x0b,0xfa,0x24,0x04,0x02,0x2c,0x00,0x40,0x90,0x21,0x3c,0x02,0xff,0xff,
+0x34,0x42,0x3f,0xff,0x02,0x42,0x10,0x24,0x08,0x00,0x0b,0x47,0x34,0x52,0x80,0x00,
+0x0c,0x00,0x0b,0xfa,0x24,0x04,0x02,0x2c,0x34,0x52,0x40,0x00,0x02,0x40,0x28,0x21,
+0x0c,0x00,0x0b,0xed,0x24,0x04,0x02,0x2c,0x0c,0x00,0x0b,0xfa,0x24,0x04,0x02,0x58,
+0x24,0x04,0x02,0x5c,0x0c,0x00,0x0b,0xfa,0x00,0x02,0x9e,0x02,0x30,0x43,0x00,0xff,
+0x00,0x13,0x12,0x00,0x00,0x43,0x10,0x25,0x2c,0x43,0x00,0x04,0x14,0x60,0x00,0x20,
+0x2c,0x42,0x00,0x11,0x10,0x40,0x00,0x0d,0x00,0x00,0x00,0x00,0x3c,0x02,0xff,0xff,
+0x34,0x42,0x3f,0xff,0x02,0x42,0x90,0x24,0x02,0x40,0x28,0x21,0x24,0x04,0x02,0x2c,
+0x0c,0x00,0x0b,0xed,0x36,0x52,0x80,0x00,0x02,0x40,0x28,0x21,0x0c,0x00,0x0b,0xed,
+0x24,0x04,0x02,0x2c,0x08,0x00,0x0b,0x94,0x2e,0x22,0x00,0x21,0x0c,0x00,0x0b,0xfa,
+0x24,0x04,0x02,0x08,0x3c,0x04,0x00,0xc0,0x00,0x40,0x28,0x21,0x00,0x44,0x10,0x24,
+0x00,0x02,0x15,0x82,0x24,0x03,0x00,0x02,0x14,0x43,0xff,0xec,0x00,0x00,0x00,0x00,
+0x3c,0x02,0xff,0x3f,0x34,0x42,0xff,0xff,0x00,0xa2,0x10,0x24,0x00,0x44,0x28,0x25,
+0x0c,0x00,0x0b,0xed,0x24,0x04,0x02,0x08,0x08,0x00,0x0b,0xc4,0x3c,0x02,0xff,0xff,
+0x0c,0x00,0x0b,0xfa,0x24,0x04,0x02,0x08,0x00,0x40,0x28,0x21,0x00,0x02,0x15,0x82,
+0x30,0x42,0x00,0x03,0x24,0x03,0x00,0x03,0x14,0x43,0xff,0xdc,0x3c,0x03,0x00,0x80,
+0x3c,0x02,0xff,0x3f,0x34,0x42,0xff,0xff,0x00,0xa2,0x10,0x24,0x08,0x00,0x0b,0xdc,
+0x00,0x43,0x28,0x25,0x30,0x83,0x00,0x03,0x00,0x04,0x20,0x40,0x00,0x83,0x20,0x23,
+0x3c,0x02,0xb0,0x0a,0x00,0x82,0x20,0x21,0xac,0x85,0x00,0x00,0x00,0x00,0x18,0x21,
+0x24,0x63,0x00,0x01,0x2c,0x62,0x00,0x0a,0x14,0x40,0xff,0xfe,0x24,0x63,0x00,0x01,
+0x03,0xe0,0x00,0x08,0x24,0x63,0xff,0xff,0x30,0x86,0x00,0x03,0x00,0x04,0x28,0x40,
+0x3c,0x03,0xb0,0x0a,0x00,0xa6,0x10,0x23,0x00,0x43,0x10,0x21,0x24,0x04,0xff,0xff,
+0xac,0x44,0x10,0x00,0x00,0x00,0x18,0x21,0x24,0x63,0x00,0x01,0x2c,0x62,0x00,0x0a,
+0x14,0x40,0xff,0xfe,0x24,0x63,0x00,0x01,0x24,0x63,0xff,0xff,0x00,0xa6,0x18,0x23,
+0x3c,0x02,0xb0,0x0a,0x00,0x62,0x18,0x21,0x8c,0x62,0x00,0x00,0x03,0xe0,0x00,0x08,
+0x00,0x00,0x00,0x00,0x3c,0x05,0xb0,0x03,0x3c,0x02,0x80,0x00,0x24,0x42,0x30,0x34,
+0x24,0x03,0x00,0x01,0x34,0xa5,0x00,0x20,0x3c,0x06,0xb0,0x03,0xac,0xa2,0x00,0x00,
+0x34,0xc6,0x01,0x04,0xa0,0x83,0x00,0x48,0xa0,0x80,0x00,0x04,0xa0,0x80,0x00,0x05,
+0xa0,0x80,0x00,0x06,0xa0,0x80,0x00,0x07,0xa0,0x80,0x00,0x08,0xa0,0x80,0x00,0x09,
+0xa0,0x80,0x00,0x0a,0xa0,0x80,0x00,0x11,0xa0,0x80,0x00,0x13,0xa0,0x80,0x00,0x49,
+0x94,0xc2,0x00,0x00,0xac,0x80,0x00,0x00,0xac,0x80,0x00,0x24,0x00,0x02,0x14,0x00,
+0x00,0x02,0x14,0x03,0x30,0x43,0x00,0xff,0x30,0x42,0xff,0x00,0xa4,0x83,0x00,0x46,
+0xa4,0x82,0x00,0x44,0xac,0x80,0x00,0x28,0xac,0x80,0x00,0x2c,0xac,0x80,0x00,0x30,
+0xac,0x80,0x00,0x34,0xac,0x80,0x00,0x38,0xac,0x80,0x00,0x3c,0x03,0xe0,0x00,0x08,
+0xac,0x80,0x00,0x40,0x84,0x83,0x00,0x0c,0x3c,0x07,0xb0,0x03,0x34,0xe7,0x00,0x20,
+0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x80,0x27,0x83,0x96,0x44,
+0x00,0x43,0x10,0x21,0x8c,0x48,0x00,0x18,0x3c,0x02,0x80,0x00,0x24,0x42,0x30,0xc4,
+0xac,0xe2,0x00,0x00,0x8d,0x03,0x00,0x08,0x80,0x82,0x00,0x13,0x00,0x05,0x2c,0x00,
+0x00,0x03,0x1e,0x02,0x00,0x02,0x12,0x00,0x30,0x63,0x00,0x7e,0x00,0x62,0x18,0x21,
+0x00,0x65,0x18,0x21,0x3c,0x02,0xc0,0x00,0x3c,0x05,0xb0,0x05,0x34,0x42,0x04,0x00,
+0x24,0x63,0x00,0x01,0x3c,0x07,0xb0,0x05,0x3c,0x08,0xb0,0x05,0x34,0xa5,0x04,0x20,
+0xac,0xa3,0x00,0x00,0x00,0xc2,0x30,0x21,0x34,0xe7,0x04,0x24,0x35,0x08,0x02,0x28,
+0x24,0x02,0x00,0x01,0x24,0x03,0x00,0x20,0xac,0xe6,0x00,0x00,0xac,0x82,0x00,0x3c,
+0x03,0xe0,0x00,0x08,0xa1,0x03,0x00,0x00,0x27,0xbd,0xff,0xc0,0x00,0x07,0x60,0x80,
+0x27,0x82,0xba,0x40,0xaf,0xb7,0x00,0x34,0xaf,0xb5,0x00,0x2c,0xaf,0xb3,0x00,0x24,
+0xaf,0xbf,0x00,0x3c,0xaf,0xbe,0x00,0x38,0xaf,0xb6,0x00,0x30,0xaf,0xb4,0x00,0x28,
+0xaf,0xb2,0x00,0x20,0xaf,0xb1,0x00,0x1c,0xaf,0xb0,0x00,0x18,0x01,0x82,0x10,0x21,
+0x8c,0x43,0x00,0x00,0x3c,0x07,0xb0,0x03,0x3c,0x02,0x80,0x00,0x94,0x71,0x00,0x14,
+0x34,0xe7,0x00,0x20,0x24,0x42,0x31,0x58,0x3c,0x03,0xb0,0x05,0xac,0xe2,0x00,0x00,
+0x34,0x63,0x01,0x28,0x90,0x67,0x00,0x00,0x00,0x11,0xa8,0xc0,0x02,0xb1,0x18,0x21,
+0x27,0x82,0x96,0x44,0x00,0x03,0x18,0x80,0x00,0x62,0x18,0x21,0x00,0x05,0x2c,0x00,
+0x00,0x07,0x3e,0x00,0x28,0xc2,0x00,0x03,0x00,0xc0,0x98,0x21,0xaf,0xa4,0x00,0x40,
+0x00,0x05,0x6c,0x03,0x8c,0x68,0x00,0x18,0x02,0xa0,0x58,0x21,0x10,0x40,0x01,0x4f,
+0x00,0x07,0xbe,0x03,0x00,0xd7,0x10,0x07,0x30,0x57,0x00,0x01,0x01,0x71,0x10,0x21,
+0x27,0x83,0x96,0x48,0x00,0x02,0x10,0x80,0x00,0x43,0x10,0x21,0x80,0x4e,0x00,0x06,
+0x8d,0x03,0x00,0x00,0x8d,0x0f,0x00,0x04,0x8d,0x0a,0x00,0x08,0x8d,0x10,0x00,0x0c,
+0x11,0xc0,0x00,0x1c,0x00,0x00,0xa0,0x21,0x27,0x82,0xba,0x40,0x01,0x82,0x10,0x21,
+0x8c,0x44,0x00,0x00,0x00,0x00,0x00,0x00,0x90,0x83,0x00,0x16,0x00,0x00,0x00,0x00,
+0x30,0x63,0x00,0x04,0x14,0x60,0x00,0x13,0x3c,0x02,0xb0,0x09,0x34,0x42,0x01,0x46,
+0x90,0x43,0x00,0x00,0x2a,0x64,0x00,0x04,0x10,0x80,0x01,0x26,0x30,0x65,0x00,0x01,
+0x8f,0xa3,0x00,0x40,0x00,0x00,0x00,0x00,0x90,0x62,0x00,0x09,0x00,0x00,0x00,0x00,
+0x12,0x62,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x28,0x21,0x14,0xa0,0x00,0x03,
+0x00,0x00,0x38,0x21,0x12,0xe0,0x00,0x03,0x38,0xf4,0x00,0x01,0x24,0x07,0x00,0x01,
+0x38,0xf4,0x00,0x01,0x01,0x71,0x10,0x21,0x00,0x02,0x38,0x80,0x27,0x83,0x96,0x50,
+0x00,0xe3,0x48,0x21,0x91,0x25,0x00,0x00,0x00,0x0f,0x11,0xc3,0x2c,0xa3,0x00,0x04,
+0x00,0x03,0xa0,0x0b,0x12,0x80,0x00,0xc7,0x30,0x52,0x00,0x01,0x93,0x88,0xc2,0x2a,
+0x00,0x0a,0x16,0x42,0x30,0x4a,0x00,0x3f,0x2d,0x06,0x00,0x0c,0x10,0xc0,0x00,0xaf,
+0x00,0xa0,0x20,0x21,0x2c,0xa2,0x00,0x10,0x14,0x40,0x00,0x04,0x00,0x88,0x10,0x2b,
+0x30,0xa2,0x00,0x07,0x24,0x44,0x00,0x04,0x00,0x88,0x10,0x2b,0x10,0x40,0x00,0x0b,
+0x01,0x71,0x10,0x21,0x27,0x85,0xc1,0x5c,0x00,0x08,0x10,0x40,0x00,0x48,0x10,0x21,
+0x00,0x45,0x10,0x21,0x90,0x48,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x88,0x18,0x2b,
+0x14,0x60,0xff,0xfa,0x00,0x08,0x10,0x40,0x01,0x71,0x10,0x21,0x00,0x02,0x10,0x80,
+0x27,0x83,0x96,0x48,0x00,0x43,0x10,0x21,0x31,0xc4,0x00,0x01,0x10,0x80,0x00,0x94,
+0xa0,0x48,0x00,0x07,0x24,0x0d,0x00,0x0e,0x24,0x11,0x01,0x06,0x27,0x82,0xba,0x40,
+0x01,0x82,0x10,0x21,0x8c,0x43,0x00,0x00,0x24,0x16,0x00,0x01,0x00,0x11,0xa8,0xc0,
+0x90,0x62,0x00,0x16,0x00,0x00,0x00,0x00,0x34,0x42,0x00,0x04,0xa0,0x62,0x00,0x16,
+0x00,0x0f,0x1b,0x43,0x30,0x7e,0x00,0x01,0x00,0x0a,0x10,0x40,0x00,0x12,0x19,0xc0,
+0x00,0x5e,0x10,0x21,0x00,0x08,0x22,0x00,0x00,0x43,0x10,0x21,0x00,0x44,0x10,0x21,
+0x00,0x0d,0x1c,0x00,0x00,0x10,0x82,0x02,0x01,0x00,0x28,0x21,0x00,0x00,0x20,0x21,
+0x00,0x43,0x90,0x21,0x0c,0x00,0x01,0xdd,0x32,0x10,0x07,0xff,0x00,0x16,0x12,0x80,
+0x00,0x10,0x84,0x80,0x02,0x22,0x10,0x21,0x00,0x50,0x10,0x21,0x3c,0x03,0xc0,0x00,
+0x16,0x60,0x00,0x2b,0x00,0x43,0x80,0x21,0x3c,0x02,0xb0,0x05,0x34,0x42,0x04,0x00,
+0x3c,0x03,0xb0,0x05,0x3c,0x04,0xb0,0x05,0xac,0x52,0x00,0x00,0x34,0x63,0x04,0x04,
+0x34,0x84,0x02,0x28,0x24,0x02,0x00,0x01,0xac,0x70,0x00,0x00,0xa0,0x82,0x00,0x00,
+0x3c,0x02,0xb0,0x09,0x34,0x42,0x01,0x46,0x90,0x44,0x00,0x00,0x8f,0xa2,0x00,0x40,
+0x30,0x86,0x00,0x01,0x90,0x43,0x00,0x09,0x00,0x00,0x00,0x00,0x02,0x63,0x18,0x26,
+0x00,0x03,0x30,0x0b,0x14,0xc0,0x00,0x03,0x00,0x00,0x28,0x21,0x12,0xe0,0x00,0x03,
+0x02,0xb1,0x10,0x21,0x24,0x05,0x00,0x01,0x02,0xb1,0x10,0x21,0x27,0x83,0x96,0x48,
+0x00,0x02,0x10,0x80,0x00,0x43,0x10,0x21,0x84,0x48,0x00,0x04,0x00,0xa0,0x30,0x21,
+0x03,0xc0,0x20,0x21,0x02,0x60,0x28,0x21,0x02,0x80,0x38,0x21,0x0c,0x00,0x00,0x70,
+0xaf,0xa8,0x00,0x10,0x7b,0xbe,0x01,0xfc,0x7b,0xb6,0x01,0xbc,0x7b,0xb4,0x01,0x7c,
+0x7b,0xb2,0x01,0x3c,0x7b,0xb0,0x00,0xfc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x40,
+0x24,0x02,0x00,0x01,0x12,0x62,0x00,0x3d,0x3c,0x02,0xb0,0x05,0x24,0x02,0x00,0x02,
+0x12,0x62,0x00,0x31,0x3c,0x02,0xb0,0x05,0x24,0x02,0x00,0x03,0x12,0x62,0x00,0x25,
+0x3c,0x02,0xb0,0x05,0x24,0x02,0x00,0x10,0x12,0x62,0x00,0x19,0x3c,0x02,0xb0,0x05,
+0x24,0x02,0x00,0x11,0x12,0x62,0x00,0x0d,0x3c,0x02,0xb0,0x05,0x24,0x02,0x00,0x12,
+0x16,0x62,0xff,0xcf,0x3c,0x02,0xb0,0x05,0x3c,0x03,0xb0,0x05,0x34,0x42,0x04,0x20,
+0x3c,0x04,0xb0,0x05,0x34,0x63,0x04,0x24,0xac,0x52,0x00,0x00,0x34,0x84,0x02,0x28,
+0xac,0x70,0x00,0x00,0x08,0x00,0x0c,0xf7,0x24,0x02,0x00,0x20,0x34,0x42,0x04,0x40,
+0x3c,0x03,0xb0,0x05,0x3c,0x04,0xb0,0x05,0xac,0x52,0x00,0x00,0x34,0x63,0x04,0x44,
+0x34,0x84,0x02,0x28,0x24,0x02,0x00,0x40,0x08,0x00,0x0c,0xf7,0xac,0x70,0x00,0x00,
+0x34,0x42,0x04,0x28,0x3c,0x03,0xb0,0x05,0x3c,0x04,0xb0,0x05,0xac,0x52,0x00,0x00,
+0x34,0x63,0x04,0x2c,0x34,0x84,0x02,0x28,0x24,0x02,0xff,0x80,0x08,0x00,0x0c,0xf7,
+0xac,0x70,0x00,0x00,0x34,0x42,0x04,0x18,0x3c,0x03,0xb0,0x05,0x3c,0x04,0xb0,0x05,
+0xac,0x52,0x00,0x00,0x34,0x63,0x04,0x1c,0x34,0x84,0x02,0x28,0x24,0x02,0x00,0x08,
+0x08,0x00,0x0c,0xf7,0xac,0x70,0x00,0x00,0x34,0x42,0x04,0x10,0x3c,0x03,0xb0,0x05,
+0x3c,0x04,0xb0,0x05,0xac,0x52,0x00,0x00,0x34,0x63,0x04,0x14,0x34,0x84,0x02,0x28,
+0x24,0x02,0x00,0x04,0x08,0x00,0x0c,0xf7,0xac,0x70,0x00,0x00,0x34,0x42,0x04,0x08,
+0x3c,0x03,0xb0,0x05,0x3c,0x04,0xb0,0x05,0xac,0x52,0x00,0x00,0x34,0x63,0x04,0x0c,
+0x34,0x84,0x02,0x28,0x24,0x02,0x00,0x02,0x08,0x00,0x0c,0xf7,0xac,0x70,0x00,0x00,
+0x24,0x0d,0x00,0x14,0x08,0x00,0x0c,0xcf,0x24,0x11,0x01,0x02,0x30,0xa2,0x00,0x07,
+0x24,0x44,0x00,0x0c,0x00,0x88,0x18,0x2b,0x10,0x60,0x00,0x0c,0x25,0x02,0x00,0x04,
+0x27,0x85,0xc1,0x5c,0x00,0x08,0x10,0x40,0x00,0x48,0x10,0x21,0x00,0x45,0x10,0x21,
+0x90,0x48,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x88,0x18,0x2b,0x14,0x60,0xff,0xfa,
+0x00,0x08,0x10,0x40,0x2d,0x06,0x00,0x0c,0x25,0x02,0x00,0x04,0x08,0x00,0x0c,0xc6,
+0x00,0x46,0x40,0x0a,0x27,0x82,0xba,0x40,0x01,0x82,0x20,0x21,0x8c,0x86,0x00,0x00,
+0x00,0x00,0x00,0x00,0x90,0xc2,0x00,0x19,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x07,
+0x00,0x00,0x00,0x00,0x27,0x82,0x96,0x60,0x00,0xe2,0x10,0x21,0x90,0x43,0x00,0x00,
+0x00,0x00,0x00,0x00,0x10,0x60,0x00,0x12,0x00,0x00,0x00,0x00,0x90,0xc3,0x00,0x16,
+0x27,0x82,0x96,0x48,0x00,0xe2,0x10,0x21,0x34,0x63,0x00,0x20,0x90,0x48,0x00,0x07,
+0xa0,0xc3,0x00,0x16,0x8c,0x84,0x00,0x00,0x00,0x0a,0x16,0x42,0x30,0x4a,0x00,0x3f,
+0x90,0x83,0x00,0x16,0x24,0x0d,0x00,0x18,0x24,0x11,0x01,0x03,0x30,0x63,0x00,0xfb,
+0x24,0x16,0x00,0x01,0x24,0x15,0x08,0x18,0x08,0x00,0x0c,0xd8,0xa0,0x83,0x00,0x16,
+0x8d,0x02,0x00,0x04,0x00,0x0a,0x1c,0x42,0x30,0x42,0x00,0x10,0x14,0x40,0x00,0x15,
+0x30,0x6a,0x00,0x3f,0x81,0x22,0x00,0x05,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x11,
+0x30,0x6a,0x00,0x3e,0x27,0x83,0x96,0x58,0x00,0xe3,0x18,0x21,0x80,0x64,0x00,0x00,
+0x27,0x83,0xbb,0xb8,0x00,0x04,0x11,0x00,0x00,0x44,0x10,0x23,0x00,0x02,0x10,0x80,
+0x00,0x44,0x10,0x23,0x00,0x02,0x10,0x80,0x00,0x43,0x10,0x21,0x90,0x44,0x00,0x05,
+0x90,0x43,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x64,0x18,0x24,0x30,0x63,0x00,0x01,
+0x01,0x43,0x50,0x25,0x27,0x85,0xba,0x40,0x01,0x85,0x28,0x21,0x8c,0xa6,0x00,0x00,
+0x01,0x71,0x10,0x21,0x27,0x83,0x96,0x50,0x90,0xc4,0x00,0x16,0x00,0x02,0x10,0x80,
+0x00,0x43,0x10,0x21,0x30,0x84,0x00,0xdf,0x90,0x48,0x00,0x00,0xa0,0xc4,0x00,0x16,
+0x8c,0xa3,0x00,0x00,0x80,0xd6,0x00,0x12,0x90,0x62,0x00,0x16,0x08,0x00,0x0c,0xd7,
+0x30,0x42,0x00,0xfb,0x3c,0x03,0xb0,0x05,0x34,0x63,0x02,0x42,0x90,0x62,0x00,0x00,
+0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x0f,0x14,0x40,0xfe,0xdc,0x00,0x00,0x00,0x00,
+0x8f,0xa3,0x00,0x40,0x00,0x00,0x00,0x00,0x90,0x62,0x00,0x09,0x00,0x00,0x00,0x00,
+0x02,0x62,0x10,0x26,0x08,0x00,0x0c,0x9f,0x00,0x02,0x28,0x0b,0x24,0x02,0x00,0x10,
+0x10,0xc2,0x00,0x08,0x24,0x02,0x00,0x11,0x10,0xc2,0xfe,0xaf,0x00,0x07,0x17,0x83,
+0x24,0x02,0x00,0x12,0x14,0xc2,0xfe,0xad,0x00,0x07,0x17,0x43,0x08,0x00,0x0c,0x7f,
+0x30,0x57,0x00,0x01,0x08,0x00,0x0c,0x7f,0x00,0x07,0xbf,0xc2,0x00,0x04,0x10,0x40,
+0x27,0x83,0x86,0xb0,0x00,0x43,0x10,0x21,0x00,0x80,0x40,0x21,0x94,0x44,0x00,0x00,
+0x2d,0x07,0x00,0x04,0x24,0xc2,0x00,0x03,0x00,0x47,0x30,0x0a,0x00,0x86,0x00,0x18,
+0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,0x34,0x63,0x00,0x20,0x24,0x42,0x37,0x5c,
+0xac,0x62,0x00,0x00,0x2d,0x06,0x00,0x10,0x00,0x00,0x20,0x12,0x00,0x04,0x22,0x42,
+0x24,0x84,0x00,0x01,0x24,0x83,0x00,0xc0,0x10,0xe0,0x00,0x0b,0x24,0x82,0x00,0x60,
+0x00,0x40,0x20,0x21,0x00,0x65,0x20,0x0a,0x3c,0x03,0xb0,0x03,0x34,0x63,0x01,0x00,
+0x90,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x01,0x00,0x44,0x20,0x04,
+0x03,0xe0,0x00,0x08,0x00,0x80,0x10,0x21,0x24,0x85,0x00,0x28,0x24,0x83,0x00,0x24,
+0x31,0x02,0x00,0x08,0x14,0xc0,0xff,0xf4,0x24,0x84,0x00,0x14,0x00,0x60,0x20,0x21,
+0x08,0x00,0x0d,0xee,0x00,0xa2,0x20,0x0b,0x27,0xbd,0xff,0xe0,0x3c,0x03,0xb0,0x03,
+0x3c,0x02,0x80,0x00,0xaf,0xb0,0x00,0x10,0x24,0x42,0x37,0xf8,0x00,0x80,0x80,0x21,
+0x34,0x63,0x00,0x20,0x3c,0x04,0xb0,0x03,0xaf,0xb2,0x00,0x18,0xaf,0xb1,0x00,0x14,
+0xaf,0xbf,0x00,0x1c,0x83,0xb1,0x00,0x33,0x83,0xa8,0x00,0x37,0x34,0x84,0x01,0x10,
+0xac,0x62,0x00,0x00,0x2e,0x02,0x00,0x10,0x00,0xe0,0x90,0x21,0x8c,0x87,0x00,0x00,
+0x14,0x40,0x00,0x0c,0x2e,0x02,0x00,0x0c,0x3c,0x02,0x00,0x0f,0x34,0x42,0xf0,0x00,
+0x00,0xe2,0x10,0x24,0x14,0x40,0x00,0x37,0x32,0x02,0x00,0x08,0x32,0x02,0x00,0x07,
+0x27,0x83,0x87,0x60,0x00,0x43,0x10,0x21,0x90,0x50,0x00,0x00,0x00,0x00,0x00,0x00,
+0x2e,0x02,0x00,0x0c,0x14,0x40,0x00,0x03,0x02,0x00,0x20,0x21,0x32,0x02,0x00,0x0f,
+0x24,0x44,0x00,0x0c,0x00,0x87,0x10,0x06,0x30,0x42,0x00,0x01,0x14,0x40,0x00,0x07,
+0x2c,0x82,0x00,0x0c,0x00,0x04,0x10,0x80,0x27,0x83,0xba,0x90,0x00,0x43,0x10,0x21,
+0x8c,0x44,0x00,0x00,0x00,0x00,0x00,0x00,0x2c,0x82,0x00,0x0c,0x14,0x40,0x00,0x05,
+0x00,0x05,0x10,0x40,0x00,0x46,0x10,0x21,0x00,0x02,0x11,0x00,0x00,0x82,0x10,0x21,
+0x24,0x44,0x00,0x04,0x15,0x00,0x00,0x02,0x24,0x06,0x00,0x20,0x24,0x06,0x00,0x0e,
+0x0c,0x00,0x0d,0xd7,0x00,0x00,0x00,0x00,0x00,0x40,0x30,0x21,0x3c,0x02,0xb0,0x03,
+0x34,0x42,0x01,0x00,0x90,0x43,0x00,0x00,0x2e,0x04,0x00,0x04,0x24,0x02,0x00,0x10,
+0x24,0x05,0x00,0x0a,0x00,0x44,0x28,0x0a,0x30,0x63,0x00,0x01,0x14,0x60,0x00,0x02,
+0x00,0x05,0x10,0x40,0x00,0xa0,0x10,0x21,0x30,0x45,0x00,0xff,0x00,0xc5,0x10,0x21,
+0x24,0x46,0x00,0x46,0x02,0x26,0x18,0x04,0xa6,0x43,0x00,0x00,0x8f,0xbf,0x00,0x1c,
+0x8f,0xb2,0x00,0x18,0x7b,0xb0,0x00,0xbc,0x00,0xc0,0x10,0x21,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x20,0x10,0x40,0xff,0xcf,0x2e,0x02,0x00,0x0c,0x32,0x02,0x00,0x07,
+0x27,0x83,0x87,0x58,0x00,0x43,0x10,0x21,0x90,0x44,0x00,0x00,0x08,0x00,0x0e,0x1c,
+0x02,0x04,0x80,0x23,0x27,0xbd,0xff,0xb8,0x00,0x05,0x38,0x80,0x27,0x82,0xba,0x40,
+0xaf,0xbe,0x00,0x40,0xaf,0xb6,0x00,0x38,0xaf,0xb4,0x00,0x30,0xaf,0xbf,0x00,0x44,
+0xaf,0xb7,0x00,0x3c,0xaf,0xb5,0x00,0x34,0xaf,0xb3,0x00,0x2c,0xaf,0xb2,0x00,0x28,
+0xaf,0xb1,0x00,0x24,0xaf,0xb0,0x00,0x20,0x00,0xe2,0x38,0x21,0x8c,0xe6,0x00,0x00,
+0xaf,0xa5,0x00,0x4c,0x3c,0x02,0x80,0x00,0x3c,0x05,0xb0,0x03,0x34,0xa5,0x00,0x20,
+0x24,0x42,0x39,0x54,0x24,0x03,0x00,0x01,0xac,0xa2,0x00,0x00,0xa0,0xc3,0x00,0x12,
+0x8c,0xe5,0x00,0x00,0x94,0xc3,0x00,0x06,0x90,0xa2,0x00,0x16,0xa4,0xc3,0x00,0x14,
+0x27,0x83,0x96,0x40,0x34,0x42,0x00,0x08,0xa0,0xa2,0x00,0x16,0x8c,0xe8,0x00,0x00,
+0xaf,0xa4,0x00,0x48,0x27,0x82,0x96,0x44,0x95,0x11,0x00,0x14,0x00,0x00,0x00,0x00,
+0x00,0x11,0xa0,0xc0,0x02,0x91,0x20,0x21,0x00,0x04,0x20,0x80,0x00,0x82,0x10,0x21,
+0x8c,0x53,0x00,0x18,0x00,0x83,0x18,0x21,0x84,0x75,0x00,0x06,0x8e,0x65,0x00,0x08,
+0x8e,0x66,0x00,0x04,0x8e,0x67,0x00,0x04,0x00,0x05,0x1c,0x82,0x00,0x06,0x31,0x42,
+0x27,0x82,0x96,0x50,0x30,0x63,0x00,0x01,0x30,0xc6,0x00,0x01,0x00,0x82,0x20,0x21,
+0xa5,0x15,0x00,0x1a,0x00,0x05,0x14,0x42,0xaf,0xa3,0x00,0x18,0xaf,0xa6,0x00,0x1c,
+0x30,0xe7,0x00,0x10,0x30,0x56,0x00,0x01,0x80,0x97,0x00,0x06,0x14,0xe0,0x00,0x42,
+0x00,0x05,0xf7,0xc2,0x80,0x82,0x00,0x05,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x3f,
+0x02,0x91,0x10,0x21,0x93,0x90,0xc2,0x29,0x00,0x00,0x00,0x00,0x2e,0x02,0x00,0x0c,
+0x14,0x40,0x00,0x06,0x02,0x00,0x20,0x21,0x00,0x16,0x10,0x40,0x00,0x43,0x10,0x21,
+0x00,0x02,0x11,0x00,0x02,0x02,0x10,0x21,0x24,0x44,0x00,0x04,0x02,0x91,0x10,0x21,
+0x00,0x02,0x10,0x80,0x27,0x83,0x96,0x50,0x00,0x43,0x10,0x21,0x00,0x80,0x80,0x21,
+0xa0,0x44,0x00,0x03,0xa0,0x44,0x00,0x00,0x02,0x00,0x20,0x21,0x02,0xc0,0x28,0x21,
+0x0c,0x00,0x0d,0xd7,0x02,0xa0,0x30,0x21,0x02,0x91,0x18,0x21,0x00,0x03,0x88,0x80,
+0x00,0x40,0x90,0x21,0x27,0x82,0x96,0x60,0x02,0x22,0x10,0x21,0x8c,0x44,0x00,0x00,
+0x26,0xe3,0x00,0x02,0x00,0x03,0x17,0xc2,0x00,0x62,0x18,0x21,0x00,0x04,0x25,0xc2,
+0x00,0x03,0x18,0x43,0x30,0x84,0x00,0x01,0x00,0x03,0x18,0x40,0x03,0xc4,0x20,0x24,
+0x14,0x80,0x00,0x10,0x02,0x63,0x38,0x21,0x8f,0xa6,0x00,0x4c,0x8f,0xa4,0x00,0x48,
+0x27,0x82,0x96,0x48,0x02,0x22,0x10,0x21,0x02,0xa0,0x28,0x21,0xa4,0x52,0x00,0x04,
+0x0c,0x00,0x0c,0x56,0x00,0xc0,0x38,0x21,0x7b,0xbe,0x02,0x3c,0x7b,0xb6,0x01,0xfc,
+0x7b,0xb4,0x01,0xbc,0x7b,0xb2,0x01,0x7c,0x7b,0xb0,0x01,0x3c,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x48,0x8f,0xa2,0x00,0x1c,0x8f,0xa6,0x00,0x18,0x02,0x00,0x20,0x21,
+0x02,0xc0,0x28,0x21,0xaf,0xa2,0x00,0x10,0x0c,0x00,0x0d,0xfe,0xaf,0xa0,0x00,0x14,
+0x08,0x00,0x0e,0xba,0x02,0x42,0x90,0x21,0x02,0x91,0x10,0x21,0x00,0x02,0x10,0x80,
+0x27,0x83,0x96,0x50,0x00,0x43,0x10,0x21,0x90,0x50,0x00,0x00,0x08,0x00,0x0e,0xa6,
+0xa0,0x50,0x00,0x03,0x27,0xbd,0xff,0xb8,0xaf,0xb1,0x00,0x24,0x8f,0xb1,0x00,0x5c,
+0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,0x34,0x63,0x00,0x20,0x24,0x42,0x3b,0x64,
+0xaf,0xbe,0x00,0x40,0xaf,0xb7,0x00,0x3c,0xaf,0xb6,0x00,0x38,0xaf,0xb5,0x00,0x34,
+0xaf,0xb4,0x00,0x30,0xaf,0xa5,0x00,0x4c,0x8f,0xb5,0x00,0x58,0xaf,0xbf,0x00,0x44,
+0xaf,0xb3,0x00,0x2c,0xaf,0xb2,0x00,0x28,0xaf,0xb0,0x00,0x20,0x00,0xe0,0xb0,0x21,
+0xac,0x62,0x00,0x00,0x00,0x80,0xf0,0x21,0x00,0x00,0xb8,0x21,0x16,0x20,0x00,0x2b,
+0x00,0x00,0xa0,0x21,0x27,0x85,0xba,0x40,0x00,0x07,0x10,0x80,0x00,0x45,0x10,0x21,
+0x8c,0x53,0x00,0x00,0x00,0x15,0x18,0x80,0x00,0x65,0x18,0x21,0x92,0x62,0x00,0x16,
+0x8c,0x72,0x00,0x00,0x30,0x42,0x00,0x03,0x14,0x40,0x00,0x2d,0x00,0x00,0x00,0x00,
+0x92,0x42,0x00,0x16,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x03,0x14,0x40,0x00,0x28,
+0x00,0x00,0x00,0x00,0x8c,0x82,0x00,0x34,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x18,
+0x02,0x20,0x10,0x21,0x8c,0x82,0x00,0x38,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x14,
+0x02,0x20,0x10,0x21,0x8c,0x82,0x00,0x3c,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x0f,
+0x3c,0x03,0xb0,0x09,0x3c,0x05,0xb0,0x05,0x34,0x63,0x01,0x44,0x34,0xa5,0x02,0x52,
+0x94,0x66,0x00,0x00,0x90,0xa2,0x00,0x00,0x8f,0xa3,0x00,0x4c,0x00,0x00,0x00,0x00,
+0x00,0x62,0x10,0x06,0x30,0x42,0x00,0x01,0x10,0x40,0x00,0x04,0x30,0xc6,0xff,0xff,
+0x2c,0xc2,0x00,0x41,0x10,0x40,0x00,0x09,0x24,0x05,0x00,0x14,0x02,0x20,0x10,0x21,
+0x7b,0xbe,0x02,0x3c,0x7b,0xb6,0x01,0xfc,0x7b,0xb4,0x01,0xbc,0x7b,0xb2,0x01,0x7c,
+0x7b,0xb0,0x01,0x3c,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x48,0x0c,0x00,0x0c,0x31,
+0x24,0x06,0x01,0x07,0x24,0x02,0x00,0x01,0x08,0x00,0x0f,0x1b,0xa3,0xc2,0x00,0x11,
+0x10,0xc0,0x00,0x1c,0x24,0x02,0x00,0x01,0x10,0xc2,0x00,0x17,0x00,0xc0,0x88,0x21,
+0x96,0x54,0x00,0x1a,0x02,0xa0,0xb8,0x21,0x12,0x20,0xff,0xed,0x02,0x20,0x10,0x21,
+0x27,0x83,0xba,0x40,0x00,0x17,0x10,0x80,0x00,0x43,0x10,0x21,0x8c,0x44,0x00,0x00,
+0x3c,0x03,0xb0,0x03,0x34,0x63,0x00,0x28,0x80,0x86,0x00,0x12,0x8c,0x62,0x00,0x00,
+0x00,0x14,0x2c,0x00,0x00,0x05,0x2c,0x03,0x00,0x46,0x10,0x21,0x8f,0xa6,0x00,0x4c,
+0x02,0xe0,0x38,0x21,0x03,0xc0,0x20,0x21,0x0c,0x00,0x0c,0x56,0xac,0x62,0x00,0x00,
+0x08,0x00,0x0f,0x1b,0xaf,0xd1,0x00,0x40,0x96,0x74,0x00,0x1a,0x08,0x00,0x0f,0x2e,
+0x02,0xc0,0xb8,0x21,0x3c,0x02,0xb0,0x03,0x34,0x42,0x01,0x08,0x8c,0x50,0x00,0x00,
+0x02,0x60,0x20,0x21,0x0c,0x00,0x23,0x25,0x02,0x00,0x28,0x21,0x30,0x42,0x00,0xff,
+0x02,0x00,0x28,0x21,0x02,0x40,0x20,0x21,0x0c,0x00,0x23,0x25,0xaf,0xa2,0x00,0x18,
+0x30,0x50,0x00,0xff,0x8f,0xa2,0x00,0x18,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0xc3,
+0x00,0x00,0x00,0x00,0x12,0x00,0x00,0x18,0x24,0x11,0x00,0x01,0x96,0x63,0x00,0x14,
+0x96,0x44,0x00,0x14,0x27,0x85,0x96,0x40,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,
+0x00,0x02,0x10,0x80,0x00,0x45,0x10,0x21,0x00,0x04,0x18,0xc0,0x8c,0x46,0x00,0x08,
+0x00,0x64,0x18,0x21,0x00,0x03,0x18,0x80,0x00,0x65,0x18,0x21,0x00,0x06,0x17,0x02,
+0x24,0x04,0x00,0xff,0x8c,0x63,0x00,0x08,0x10,0x44,0x00,0xac,0x00,0x03,0x17,0x02,
+0x10,0x44,0x00,0xab,0x3c,0x02,0x80,0x00,0x00,0x66,0x18,0x2b,0x24,0x11,0x00,0x02,
+0x24,0x02,0x00,0x01,0x00,0x43,0x88,0x0a,0x24,0x02,0x00,0x01,0x12,0x22,0x00,0x45,
+0x24,0x02,0x00,0x02,0x16,0x22,0xff,0xbc,0x00,0x00,0x00,0x00,0x96,0x49,0x00,0x14,
+0x27,0x82,0x96,0x44,0x02,0xa0,0xb8,0x21,0x00,0x09,0x50,0xc0,0x01,0x49,0x18,0x21,
+0x00,0x03,0x40,0x80,0x01,0x02,0x10,0x21,0x8c,0x43,0x00,0x18,0x00,0x00,0x00,0x00,
+0x8c,0x65,0x00,0x08,0x8c,0x62,0x00,0x0c,0x8c,0x62,0x00,0x04,0x00,0x05,0x24,0x42,
+0x00,0x05,0x1c,0x82,0x30,0x42,0x00,0x10,0x30,0x66,0x00,0x01,0x14,0x40,0x00,0x2c,
+0x30,0x87,0x00,0x01,0x27,0x83,0x96,0x58,0x01,0x03,0x18,0x21,0x80,0x64,0x00,0x00,
+0x27,0x83,0xba,0xe0,0x00,0x04,0x11,0x00,0x00,0x44,0x10,0x23,0x00,0x02,0x10,0x80,
+0x00,0x44,0x10,0x23,0x00,0x02,0x10,0x80,0x00,0x43,0x10,0x21,0x90,0x45,0x00,0x00,
+0x00,0x00,0x00,0x00,0x2c,0xa3,0x00,0x0c,0x14,0x60,0x00,0x07,0x01,0x49,0x10,0x21,
+0x00,0x07,0x10,0x40,0x00,0x46,0x10,0x21,0x00,0x02,0x11,0x00,0x00,0xa2,0x10,0x21,
+0x24,0x45,0x00,0x04,0x01,0x49,0x10,0x21,0x00,0x02,0x10,0x80,0x27,0x83,0x96,0x50,
+0x00,0x43,0x10,0x21,0xa0,0x45,0x00,0x03,0xa0,0x45,0x00,0x00,0x24,0x02,0x00,0x08,
+0x12,0x02,0x00,0x0a,0x24,0x02,0x00,0x01,0x02,0x40,0x20,0x21,0x0c,0x00,0x23,0xa1,
+0xaf,0xa2,0x00,0x10,0x30,0x54,0xff,0xff,0x92,0x42,0x00,0x16,0x00,0x00,0x00,0x00,
+0x02,0x02,0x10,0x25,0x08,0x00,0x0f,0x2e,0xa2,0x42,0x00,0x16,0x02,0x40,0x20,0x21,
+0x0c,0x00,0x23,0x52,0xaf,0xa0,0x00,0x10,0x08,0x00,0x0f,0xa6,0x30,0x54,0xff,0xff,
+0x27,0x82,0x96,0x50,0x01,0x02,0x10,0x21,0x90,0x45,0x00,0x00,0x08,0x00,0x0f,0x9f,
+0xa0,0x45,0x00,0x03,0x96,0x69,0x00,0x14,0x02,0xc0,0xb8,0x21,0x24,0x0b,0x00,0x01,
+0x00,0x09,0x10,0xc0,0x00,0x49,0x18,0x21,0x00,0x03,0x40,0x80,0x00,0x40,0x50,0x21,
+0x27,0x82,0x96,0x44,0x01,0x02,0x10,0x21,0x8c,0x43,0x00,0x18,0x00,0x00,0x00,0x00,
+0x8c,0x65,0x00,0x08,0x8c,0x62,0x00,0x0c,0x8c,0x62,0x00,0x04,0x00,0x05,0x24,0x42,
+0x00,0x05,0x1c,0x82,0x30,0x42,0x00,0x10,0x30,0x66,0x00,0x01,0x10,0x40,0x00,0x0d,
+0x30,0x87,0x00,0x01,0x27,0x82,0x96,0x58,0x01,0x02,0x10,0x21,0x80,0x43,0x00,0x00,
+0x00,0x00,0x58,0x21,0x00,0x03,0x11,0x00,0x00,0x43,0x10,0x23,0x00,0x02,0x10,0x80,
+0x00,0x43,0x10,0x23,0x00,0x02,0x10,0x80,0x27,0x83,0xbb,0xb0,0x00,0x43,0x10,0x21,
+0xa0,0x40,0x00,0x04,0x11,0x60,0x00,0x3a,0x00,0x00,0x00,0x00,0x01,0x49,0x10,0x21,
+0x00,0x02,0x20,0x80,0x27,0x85,0x96,0x50,0x00,0x85,0x10,0x21,0x80,0x43,0x00,0x05,
+0x00,0x00,0x00,0x00,0x14,0x60,0x00,0x2d,0x01,0x49,0x10,0x21,0x27,0x83,0x96,0x58,
+0x00,0x83,0x18,0x21,0x80,0x64,0x00,0x00,0x27,0x83,0xba,0xe0,0x00,0x04,0x11,0x00,
+0x00,0x44,0x10,0x23,0x00,0x02,0x10,0x80,0x00,0x44,0x10,0x23,0x00,0x02,0x10,0x80,
+0x00,0x43,0x10,0x21,0x90,0x45,0x00,0x00,0x00,0x00,0x00,0x00,0x2c,0xa3,0x00,0x0c,
+0x14,0x60,0x00,0x07,0x01,0x49,0x10,0x21,0x00,0x07,0x10,0x40,0x00,0x46,0x10,0x21,
+0x00,0x02,0x11,0x00,0x00,0xa2,0x10,0x21,0x24,0x45,0x00,0x04,0x01,0x49,0x10,0x21,
+0x00,0x02,0x10,0x80,0x27,0x83,0x96,0x50,0x00,0x43,0x10,0x21,0xa0,0x45,0x00,0x03,
+0xa0,0x45,0x00,0x00,0x8f,0xa3,0x00,0x18,0x24,0x02,0x00,0x08,0x10,0x62,0x00,0x0b,
+0x02,0x60,0x20,0x21,0x24,0x02,0x00,0x01,0x0c,0x00,0x23,0xa1,0xaf,0xa2,0x00,0x10,
+0x8f,0xa3,0x00,0x18,0x30,0x54,0xff,0xff,0x92,0x62,0x00,0x16,0x00,0x00,0x00,0x00,
+0x00,0x62,0x10,0x25,0x08,0x00,0x0f,0x2e,0xa2,0x62,0x00,0x16,0x0c,0x00,0x23,0x52,
+0xaf,0xa0,0x00,0x10,0x08,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x10,0x80,
+0x00,0x45,0x10,0x21,0x90,0x45,0x00,0x00,0x08,0x00,0x0f,0xf9,0xa0,0x45,0x00,0x03,
+0x27,0x85,0x96,0x50,0x08,0x00,0x10,0x0b,0x01,0x49,0x10,0x21,0x3c,0x02,0x80,0x00,
+0x00,0x62,0x18,0x26,0x08,0x00,0x0f,0x6a,0x00,0xc2,0x30,0x26,0x12,0x00,0xff,0x57,
+0x24,0x02,0x00,0x01,0x08,0x00,0x0f,0x6f,0x24,0x11,0x00,0x02,0x3c,0x03,0xb0,0x03,
+0x3c,0x02,0x80,0x00,0x27,0xbd,0xff,0xd0,0x24,0x42,0x40,0x6c,0x34,0x63,0x00,0x20,
+0x3c,0x05,0xb0,0x05,0xaf,0xb3,0x00,0x24,0xaf,0xb2,0x00,0x20,0xaf,0xb1,0x00,0x1c,
+0xaf,0xbf,0x00,0x28,0xaf,0xb0,0x00,0x18,0xac,0x62,0x00,0x00,0x34,0xa5,0x02,0x42,
+0x90,0xa2,0x00,0x00,0x00,0x80,0x90,0x21,0x24,0x11,0x00,0x10,0x30,0x53,0x00,0xff,
+0x24,0x02,0x00,0x10,0x12,0x22,0x00,0xcf,0x00,0x00,0x18,0x21,0x24,0x02,0x00,0x11,
+0x12,0x22,0x00,0xc1,0x24,0x02,0x00,0x12,0x12,0x22,0x00,0xb4,0x00,0x00,0x00,0x00,
+0x14,0x60,0x00,0xad,0xae,0x43,0x00,0x40,0x3c,0x02,0xb0,0x05,0x34,0x42,0x02,0x2c,
+0x8c,0x44,0x00,0x00,0x3c,0x03,0x00,0x02,0x34,0x63,0x00,0xff,0x00,0x83,0x80,0x24,
+0x00,0x10,0x14,0x43,0x10,0x40,0x00,0x05,0x00,0x00,0x00,0x00,0x8e,0x42,0x00,0x34,
+0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x92,0x00,0x00,0x00,0x00,0x93,0x83,0x91,0x51,
+0x00,0x00,0x00,0x00,0x30,0x62,0x00,0x02,0x10,0x40,0x00,0x04,0x32,0x10,0x00,0xff,
+0x00,0x10,0x11,0xc3,0x14,0x40,0x00,0x86,0x00,0x00,0x00,0x00,0x16,0x00,0x00,0x15,
+0x02,0x00,0x10,0x21,0x26,0x22,0x00,0x01,0x30,0x51,0x00,0xff,0x2e,0x23,0x00,0x13,
+0x14,0x60,0xff,0xdb,0x24,0x03,0x00,0x02,0x12,0x63,0x00,0x73,0x24,0x02,0x00,0x05,
+0x2a,0x62,0x00,0x03,0x10,0x40,0x00,0x58,0x24,0x02,0x00,0x04,0x24,0x02,0x00,0x01,
+0x12,0x62,0x00,0x4b,0x02,0x40,0x20,0x21,0x3c,0x02,0xb0,0x05,0x34,0x42,0x02,0x2c,
+0x8c,0x43,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x70,0x00,0xff,0x12,0x00,0x00,0x06,
+0x02,0x00,0x10,0x21,0x8f,0xbf,0x00,0x28,0x7b,0xb2,0x01,0x3c,0x7b,0xb0,0x00,0xfc,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x30,0x92,0x46,0x00,0x04,0x8e,0x43,0x00,0x24,
+0x24,0x02,0x00,0x07,0x02,0x40,0x20,0x21,0x00,0x00,0x28,0x21,0x24,0x07,0x00,0x06,
+0xaf,0xa2,0x00,0x10,0x0c,0x00,0x0e,0xd9,0xaf,0xa3,0x00,0x14,0xae,0x42,0x00,0x24,
+0x3c,0x02,0xb0,0x05,0x8c,0x42,0x02,0x2c,0x00,0x00,0x00,0x00,0x30,0x50,0x00,0xff,
+0x16,0x00,0xff,0xec,0x02,0x00,0x10,0x21,0x92,0x46,0x00,0x05,0x8e,0x43,0x00,0x28,
+0x24,0x02,0x00,0x05,0x02,0x40,0x20,0x21,0x24,0x05,0x00,0x01,0x24,0x07,0x00,0x04,
+0xaf,0xa2,0x00,0x10,0x0c,0x00,0x0e,0xd9,0xaf,0xa3,0x00,0x14,0xae,0x42,0x00,0x28,
+0x3c,0x02,0xb0,0x05,0x8c,0x42,0x02,0x2c,0x00,0x00,0x00,0x00,0x30,0x50,0x00,0xff,
+0x16,0x00,0xff,0xdc,0x02,0x00,0x10,0x21,0x92,0x46,0x00,0x06,0x8e,0x43,0x00,0x2c,
+0x24,0x02,0x00,0x03,0x02,0x40,0x20,0x21,0x24,0x05,0x00,0x02,0x00,0x00,0x38,0x21,
+0xaf,0xa2,0x00,0x10,0x0c,0x00,0x0e,0xd9,0xaf,0xa3,0x00,0x14,0xae,0x42,0x00,0x2c,
+0x3c,0x02,0xb0,0x05,0x8c,0x42,0x02,0x2c,0x00,0x00,0x00,0x00,0x30,0x50,0x00,0xff,
+0x16,0x00,0xff,0xcc,0x02,0x00,0x10,0x21,0x92,0x46,0x00,0x07,0x8e,0x43,0x00,0x30,
+0x24,0x02,0x00,0x02,0x02,0x40,0x20,0x21,0x24,0x05,0x00,0x03,0x24,0x07,0x00,0x01,
+0xaf,0xa2,0x00,0x10,0x0c,0x00,0x0e,0xd9,0xaf,0xa3,0x00,0x14,0xae,0x42,0x00,0x30,
+0x3c,0x02,0xb0,0x05,0x8c,0x42,0x02,0x2c,0x08,0x00,0x10,0x61,0x30,0x42,0x00,0xff,
+0x92,0x46,0x00,0x04,0x8e,0x43,0x00,0x24,0x24,0x02,0x00,0x07,0x00,0x00,0x28,0x21,
+0x24,0x07,0x00,0x06,0xaf,0xa2,0x00,0x10,0x0c,0x00,0x0e,0xd9,0xaf,0xa3,0x00,0x14,
+0x08,0x00,0x10,0x5a,0xae,0x42,0x00,0x24,0x12,0x62,0x00,0x0d,0x24,0x02,0x00,0x03,
+0x24,0x02,0x00,0x08,0x16,0x62,0xff,0xa8,0x02,0x40,0x20,0x21,0x92,0x46,0x00,0x07,
+0x8e,0x42,0x00,0x30,0x24,0x05,0x00,0x03,0x24,0x07,0x00,0x01,0xaf,0xa3,0x00,0x10,
+0x0c,0x00,0x0e,0xd9,0xaf,0xa2,0x00,0x14,0x08,0x00,0x10,0x5a,0xae,0x42,0x00,0x30,
+0x92,0x46,0x00,0x06,0x8e,0x43,0x00,0x2c,0x02,0x40,0x20,0x21,0x24,0x05,0x00,0x02,
+0x00,0x00,0x38,0x21,0xaf,0xa2,0x00,0x10,0x0c,0x00,0x0e,0xd9,0xaf,0xa3,0x00,0x14,
+0x08,0x00,0x10,0x5a,0xae,0x42,0x00,0x2c,0x92,0x46,0x00,0x05,0x8e,0x43,0x00,0x28,
+0x02,0x40,0x20,0x21,0x24,0x05,0x00,0x01,0x24,0x07,0x00,0x04,0xaf,0xa2,0x00,0x10,
+0x0c,0x00,0x0e,0xd9,0xaf,0xa3,0x00,0x14,0x08,0x00,0x10,0x5a,0xae,0x42,0x00,0x28,
+0x0c,0x00,0x01,0x60,0x24,0x04,0x00,0x01,0x08,0x00,0x10,0x4b,0x00,0x00,0x00,0x00,
+0x8f,0x84,0xba,0x80,0xae,0x40,0x00,0x34,0x94,0x85,0x00,0x14,0x0c,0x00,0x1f,0xdd,
+0x00,0x00,0x00,0x00,0x93,0x83,0x91,0x51,0x00,0x00,0x00,0x00,0x30,0x62,0x00,0x02,
+0x10,0x40,0xff,0x69,0x00,0x00,0x00,0x00,0x0c,0x00,0x01,0x60,0x00,0x00,0x20,0x21,
+0x08,0x00,0x10,0x43,0x00,0x00,0x00,0x00,0x02,0x40,0x20,0x21,0x0c,0x00,0x0e,0x55,
+0x02,0x20,0x28,0x21,0x08,0x00,0x10,0x37,0x3c,0x02,0xb0,0x05,0x8e,0x42,0x00,0x3c,
+0x00,0x00,0x00,0x00,0x14,0x40,0xff,0x4a,0x00,0x00,0x00,0x00,0x8f,0x82,0xba,0x88,
+0x00,0x00,0x00,0x00,0x90,0x42,0x00,0x0a,0x00,0x00,0x00,0x00,0x00,0x02,0x18,0x2b,
+0x08,0x00,0x10,0x34,0xae,0x43,0x00,0x3c,0x8e,0x42,0x00,0x38,0x00,0x00,0x00,0x00,
+0x14,0x40,0xff,0x3d,0x24,0x02,0x00,0x12,0x8f,0x82,0xba,0x84,0x00,0x00,0x00,0x00,
+0x90,0x42,0x00,0x0a,0x00,0x00,0x00,0x00,0x00,0x02,0x18,0x2b,0x08,0x00,0x10,0x34,
+0xae,0x43,0x00,0x38,0x8e,0x42,0x00,0x34,0x00,0x00,0x00,0x00,0x14,0x40,0xff,0x30,
+0x24,0x02,0x00,0x11,0x8f,0x82,0xba,0x80,0x00,0x00,0x00,0x00,0x90,0x42,0x00,0x0a,
+0x00,0x00,0x00,0x00,0x00,0x02,0x18,0x2b,0x08,0x00,0x10,0x34,0xae,0x43,0x00,0x34,
+0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,0x27,0xbd,0xff,0xe0,0x34,0x63,0x00,0x20,
+0x24,0x42,0x44,0x20,0x3c,0x08,0xb0,0x03,0xaf,0xb1,0x00,0x14,0xac,0x62,0x00,0x00,
+0x35,0x08,0x01,0x00,0xaf,0xbf,0x00,0x18,0xaf,0xb0,0x00,0x10,0x91,0x03,0x00,0x00,
+0x00,0xa0,0x48,0x21,0x24,0x11,0x00,0x0a,0x2c,0xa5,0x00,0x04,0x24,0x02,0x00,0x10,
+0x00,0x45,0x88,0x0a,0x30,0x63,0x00,0x01,0x00,0xc0,0x28,0x21,0x14,0x60,0x00,0x02,
+0x00,0x11,0x40,0x40,0x02,0x20,0x40,0x21,0x84,0x83,0x00,0x0c,0x31,0x11,0x00,0xff,
+0x01,0x20,0x20,0x21,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x80,
+0x27,0x83,0x96,0x48,0x00,0x43,0x10,0x21,0x84,0x43,0x00,0x04,0x24,0x06,0x00,0x0e,
+0x10,0xe0,0x00,0x06,0x02,0x23,0x80,0x21,0x02,0x00,0x10,0x21,0x8f,0xbf,0x00,0x18,
+0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x20,0x0c,0x00,0x0d,0xd7,
+0x00,0x00,0x00,0x00,0x02,0x11,0x18,0x21,0x08,0x00,0x11,0x2a,0x00,0x62,0x80,0x21,
+0x27,0xbd,0xff,0xd0,0xaf,0xbf,0x00,0x28,0xaf,0xb5,0x00,0x24,0xaf,0xb4,0x00,0x20,
+0xaf,0xb2,0x00,0x18,0xaf,0xb3,0x00,0x1c,0xaf,0xb1,0x00,0x14,0xaf,0xb0,0x00,0x10,
+0x84,0x82,0x00,0x0c,0x3c,0x06,0xb0,0x03,0x34,0xc6,0x00,0x20,0x00,0x02,0x18,0xc0,
+0x00,0x62,0x18,0x21,0x00,0x03,0x18,0x80,0x27,0x82,0x96,0x44,0x00,0x62,0x10,0x21,
+0x8c,0x53,0x00,0x18,0x3c,0x02,0x80,0x00,0x24,0x42,0x44,0xd0,0xac,0xc2,0x00,0x00,
+0x8e,0x70,0x00,0x08,0x27,0x82,0x96,0x48,0x00,0x62,0x18,0x21,0x90,0x71,0x00,0x07,
+0x00,0x10,0x86,0x43,0x32,0x10,0x00,0x01,0x00,0xa0,0x38,0x21,0x02,0x00,0x30,0x21,
+0x00,0xa0,0xa0,0x21,0x02,0x20,0x28,0x21,0x0c,0x00,0x11,0x08,0x00,0x80,0xa8,0x21,
+0x02,0x20,0x20,0x21,0x02,0x00,0x28,0x21,0x24,0x06,0x00,0x14,0x0c,0x00,0x0d,0xd7,
+0x00,0x40,0x90,0x21,0x3c,0x03,0xb0,0x05,0x34,0x63,0x02,0x40,0x94,0x64,0x00,0x00,
+0x3c,0x0a,0xb0,0x09,0x3c,0x0b,0xb0,0x09,0x00,0x04,0x21,0x40,0x00,0x82,0x28,0x23,
+0x35,0x4a,0x01,0x10,0x35,0x6b,0x01,0x14,0x3c,0x0c,0xb0,0x09,0x3c,0x08,0xb0,0x09,
+0x3c,0x06,0xb0,0x09,0x00,0x44,0x10,0x2b,0x01,0x40,0x48,0x21,0x35,0x8c,0x01,0x20,
+0x01,0x60,0x38,0x21,0x35,0x08,0x01,0x24,0x34,0xc6,0x01,0x02,0x10,0x40,0x00,0x02,
+0x02,0x45,0x18,0x2b,0x00,0xa3,0x90,0x0b,0x86,0xa3,0x00,0x0c,0x27,0x84,0x96,0x50,
+0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x80,0x00,0x44,0x10,0x21,
+0x80,0x43,0x00,0x06,0xa4,0xd2,0x00,0x00,0x24,0x64,0x00,0x03,0x28,0x62,0x00,0x00,
+0x00,0x82,0x18,0x0b,0x00,0x03,0x18,0x83,0x00,0x03,0x18,0x80,0x12,0x80,0x00,0x11,
+0x02,0x63,0x28,0x21,0x8c,0xa2,0x00,0x0c,0x8c,0xa3,0x00,0x08,0x00,0x02,0x14,0x00,
+0x00,0x03,0x1c,0x02,0x00,0x43,0x10,0x21,0xad,0x22,0x00,0x00,0x8c,0xa3,0x00,0x0c,
+0x00,0x00,0x00,0x00,0x00,0x03,0x1c,0x02,0xa4,0xe3,0x00,0x00,0x8f,0xbf,0x00,0x28,
+0x7b,0xb4,0x01,0x3c,0x7b,0xb2,0x00,0xfc,0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x30,0x8c,0xa2,0x00,0x04,0x00,0x00,0x00,0x00,0xad,0x42,0x00,0x00,
+0x8c,0xa4,0x00,0x08,0x00,0x00,0x00,0x00,0xa5,0x64,0x00,0x00,0x78,0xa2,0x00,0x7c,
+0x00,0x00,0x00,0x00,0x00,0x03,0x1c,0x00,0x00,0x02,0x14,0x02,0x00,0x62,0x18,0x21,
+0xad,0x83,0x00,0x00,0x8c,0xa2,0x00,0x0c,0x00,0x00,0x00,0x00,0x00,0x02,0x14,0x02,
+0x08,0x00,0x11,0x87,0xa5,0x02,0x00,0x00,0x27,0xbd,0xff,0xe0,0xaf,0xb2,0x00,0x18,
+0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x1c,0xaf,0xb1,0x00,0x14,0x84,0x82,0x00,0x0c,
+0x00,0x80,0x90,0x21,0x3c,0x05,0xb0,0x03,0x00,0x02,0x20,0xc0,0x00,0x82,0x20,0x21,
+0x00,0x04,0x20,0x80,0x27,0x82,0x96,0x44,0x00,0x82,0x10,0x21,0x8c,0x51,0x00,0x18,
+0x3c,0x02,0x80,0x00,0x34,0xa5,0x00,0x20,0x24,0x42,0x46,0x78,0x27,0x83,0x96,0x48,
+0xac,0xa2,0x00,0x00,0x00,0x83,0x20,0x21,0x3c,0x02,0xb0,0x03,0x90,0x86,0x00,0x07,
+0x34,0x42,0x01,0x00,0x8e,0x23,0x00,0x08,0x90,0x44,0x00,0x00,0x2c,0xc5,0x00,0x04,
+0x24,0x02,0x00,0x10,0x24,0x10,0x00,0x0a,0x00,0x45,0x80,0x0a,0x00,0x03,0x1e,0x43,
+0x30,0x84,0x00,0x01,0x30,0x65,0x00,0x01,0x14,0x80,0x00,0x02,0x00,0x10,0x10,0x40,
+0x02,0x00,0x10,0x21,0x00,0xc0,0x20,0x21,0x24,0x06,0x00,0x20,0x0c,0x00,0x0d,0xd7,
+0x30,0x50,0x00,0xff,0x86,0x44,0x00,0x0c,0x27,0x85,0x96,0x50,0x3c,0x06,0xb0,0x09,
+0x00,0x04,0x18,0xc0,0x00,0x64,0x18,0x21,0x00,0x03,0x18,0x80,0x00,0x65,0x18,0x21,
+0x80,0x64,0x00,0x06,0x00,0x50,0x10,0x21,0x34,0xc6,0x01,0x02,0x24,0x85,0x00,0x03,
+0x28,0x83,0x00,0x00,0x00,0xa3,0x20,0x0b,0x00,0x04,0x20,0x83,0x00,0x04,0x20,0x80,
+0xa4,0xc2,0x00,0x00,0x02,0x24,0x20,0x21,0x8c,0x83,0x00,0x04,0x3c,0x02,0xb0,0x09,
+0x34,0x42,0x01,0x10,0xac,0x43,0x00,0x00,0x8c,0x86,0x00,0x08,0x3c,0x02,0xb0,0x09,
+0x34,0x42,0x01,0x14,0xa4,0x46,0x00,0x00,0x8c,0x85,0x00,0x0c,0x8c,0x82,0x00,0x08,
+0x3c,0x06,0xb0,0x09,0x00,0x05,0x2c,0x00,0x00,0x02,0x14,0x02,0x00,0xa2,0x28,0x21,
+0x34,0xc6,0x01,0x20,0xac,0xc5,0x00,0x00,0x8c,0x83,0x00,0x0c,0x3c,0x05,0xb0,0x09,
+0x34,0xa5,0x01,0x24,0x00,0x03,0x1c,0x02,0xa4,0xa3,0x00,0x00,0x92,0x42,0x00,0x0a,
+0x3c,0x03,0xb0,0x09,0x34,0x63,0x01,0x30,0x00,0x02,0x13,0x00,0x24,0x42,0x00,0x04,
+0x30,0x42,0xff,0xff,0xa4,0x62,0x00,0x00,0x86,0x44,0x00,0x0c,0x27,0x83,0x96,0x58,
+0x8f,0xbf,0x00,0x1c,0x00,0x04,0x10,0xc0,0x00,0x44,0x10,0x21,0x00,0x02,0x10,0x80,
+0x00,0x43,0x10,0x21,0x94,0x44,0x00,0x02,0x8f,0xb2,0x00,0x18,0x7b,0xb0,0x00,0xbc,
+0x3c,0x05,0xb0,0x09,0x34,0xa5,0x01,0x32,0xa4,0xa4,0x00,0x00,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x20,0x27,0xbd,0xff,0xe0,0x3c,0x02,0xb0,0x03,0x3c,0x03,0x80,0x00,
+0xaf,0xb0,0x00,0x10,0x34,0x42,0x00,0x20,0x00,0xa0,0x80,0x21,0x24,0x63,0x48,0x04,
+0x00,0x05,0x2c,0x43,0xaf,0xb1,0x00,0x14,0xaf,0xbf,0x00,0x18,0xac,0x43,0x00,0x00,
+0x10,0xa0,0x00,0x05,0x00,0x80,0x88,0x21,0x8c,0x82,0x00,0x34,0x00,0x00,0x00,0x00,
+0x14,0x40,0x00,0xaf,0x00,0x00,0x00,0x00,0x32,0x10,0x00,0xff,0x12,0x00,0x00,0x47,
+0x00,0x00,0x10,0x21,0x24,0x02,0x00,0x08,0x12,0x02,0x00,0x9c,0x2a,0x02,0x00,0x09,
+0x10,0x40,0x00,0x84,0x24,0x02,0x00,0x40,0x24,0x04,0x00,0x02,0x12,0x04,0x00,0x74,
+0x2a,0x02,0x00,0x03,0x10,0x40,0x00,0x64,0x24,0x02,0x00,0x04,0x24,0x02,0x00,0x01,
+0x12,0x02,0x00,0x55,0x00,0x00,0x00,0x00,0x82,0x22,0x00,0x11,0x92,0x27,0x00,0x11,
+0x10,0x40,0x00,0x4e,0x00,0x00,0x00,0x00,0x92,0x26,0x00,0x0a,0x24,0x02,0x00,0x12,
+0x10,0x46,0x00,0x09,0x30,0xc2,0x00,0xff,0x27,0x83,0xba,0x40,0x00,0x02,0x10,0x80,
+0x00,0x43,0x10,0x21,0x8c,0x44,0x00,0x00,0x00,0x00,0x00,0x00,0x94,0x83,0x00,0x14,
+0x00,0x00,0x00,0x00,0xa6,0x23,0x00,0x0c,0x3c,0x02,0xb0,0x09,0x34,0x42,0x00,0x40,
+0x90,0x43,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x63,0x00,0x03,0xa2,0x23,0x00,0x10,
+0x14,0x60,0x00,0x2b,0x30,0x65,0x00,0x01,0x30,0xc2,0x00,0xff,0x27,0x83,0xba,0x40,
+0x00,0x02,0x10,0x80,0x00,0x43,0x10,0x21,0x8c,0x44,0x00,0x00,0x82,0x23,0x00,0x12,
+0x90,0x82,0x00,0x16,0x00,0x00,0x00,0x00,0x00,0x02,0x11,0x42,0x30,0x42,0x00,0x01,
+0x00,0x62,0x18,0x21,0x00,0x03,0x26,0x00,0x14,0x80,0x00,0x18,0xa2,0x23,0x00,0x12,
+0x00,0x07,0x16,0x00,0x14,0x40,0x00,0x11,0x24,0x02,0x00,0x01,0x96,0x23,0x00,0x0c,
+0x27,0x84,0x96,0x50,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x80,
+0x00,0x44,0x10,0x21,0x80,0x45,0x00,0x06,0x00,0x03,0x1a,0x00,0x3c,0x02,0xb0,0x00,
+0x00,0x65,0x18,0x21,0x00,0x62,0x18,0x21,0x90,0x64,0x00,0x00,0x90,0x62,0x00,0x04,
+0xa2,0x20,0x00,0x15,0xa3,0x80,0x92,0x15,0x24,0x02,0x00,0x01,0x8f,0xbf,0x00,0x18,
+0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x20,0x0c,0x00,0x11,0x9e,
+0x02,0x20,0x20,0x21,0x92,0x27,0x00,0x11,0x08,0x00,0x12,0x49,0x00,0x07,0x16,0x00,
+0x0c,0x00,0x11,0x34,0x02,0x20,0x20,0x21,0x86,0x23,0x00,0x0c,0x27,0x84,0x96,0x48,
+0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x80,0x00,0x44,0x20,0x21,
+0x90,0x85,0x00,0x07,0x27,0x83,0x96,0x50,0x00,0x43,0x10,0x21,0xa2,0x25,0x00,0x13,
+0x90,0x83,0x00,0x07,0x08,0x00,0x12,0x61,0xa0,0x43,0x00,0x02,0x92,0x26,0x00,0x0a,
+0x08,0x00,0x12,0x2a,0x30,0xc2,0x00,0xff,0x8e,0x22,0x00,0x24,0x00,0x00,0x00,0x00,
+0x10,0x50,0x00,0x07,0xa2,0x20,0x00,0x08,0x24,0x02,0x00,0x07,0xa2,0x22,0x00,0x0a,
+0x92,0x22,0x00,0x27,0xae,0x20,0x00,0x24,0x08,0x00,0x12,0x22,0xa2,0x22,0x00,0x04,
+0x08,0x00,0x12,0x7b,0x24,0x02,0x00,0x06,0x16,0x02,0xff,0x9f,0x24,0x02,0x00,0x01,
+0x8e,0x23,0x00,0x2c,0x00,0x00,0x00,0x00,0x10,0x62,0x00,0x07,0xa2,0x24,0x00,0x08,
+0x24,0x02,0x00,0x03,0xa2,0x22,0x00,0x0a,0x92,0x22,0x00,0x2f,0xae,0x20,0x00,0x2c,
+0x08,0x00,0x12,0x22,0xa2,0x22,0x00,0x06,0x08,0x00,0x12,0x8a,0xa2,0x20,0x00,0x0a,
+0x8e,0x22,0x00,0x28,0x24,0x03,0x00,0x01,0x24,0x04,0x00,0x01,0x10,0x44,0x00,0x07,
+0xa2,0x23,0x00,0x08,0x24,0x02,0x00,0x05,0xa2,0x22,0x00,0x0a,0x92,0x22,0x00,0x2b,
+0xae,0x20,0x00,0x28,0x08,0x00,0x12,0x22,0xa2,0x22,0x00,0x05,0x08,0x00,0x12,0x96,
+0x24,0x02,0x00,0x04,0x12,0x02,0x00,0x10,0x2a,0x02,0x00,0x41,0x10,0x40,0x00,0x08,
+0x24,0x02,0x00,0x80,0x24,0x02,0x00,0x20,0x16,0x02,0xff,0x7f,0x24,0x02,0x00,0x12,
+0xa2,0x22,0x00,0x0a,0xa2,0x22,0x00,0x08,0x08,0x00,0x12,0x22,0xae,0x20,0x00,0x3c,
+0x16,0x02,0xff,0x79,0x24,0x02,0x00,0x10,0xa2,0x22,0x00,0x0a,0xa2,0x22,0x00,0x08,
+0x08,0x00,0x12,0x22,0xae,0x20,0x00,0x34,0x24,0x02,0x00,0x11,0xa2,0x22,0x00,0x0a,
+0xa2,0x22,0x00,0x08,0x08,0x00,0x12,0x22,0xae,0x20,0x00,0x38,0x8e,0x24,0x00,0x30,
+0x24,0x02,0x00,0x03,0x24,0x03,0x00,0x01,0x10,0x83,0x00,0x07,0xa2,0x22,0x00,0x08,
+0x24,0x02,0x00,0x02,0xa2,0x22,0x00,0x0a,0x92,0x22,0x00,0x33,0xae,0x20,0x00,0x30,
+0x08,0x00,0x12,0x22,0xa2,0x22,0x00,0x07,0x08,0x00,0x12,0xba,0xa2,0x24,0x00,0x0a,
+0x8f,0x84,0xba,0x80,0xae,0x20,0x00,0x34,0x94,0x85,0x00,0x14,0x0c,0x00,0x1f,0xdd,
+0x32,0x10,0x00,0xff,0x08,0x00,0x12,0x13,0x00,0x00,0x00,0x00,0x3c,0x03,0xb0,0x03,
+0x3c,0x02,0x80,0x00,0x24,0x42,0x4b,0x1c,0x34,0x63,0x00,0x20,0xac,0x62,0x00,0x00,
+0x80,0xa2,0x00,0x15,0x3c,0x06,0xb0,0x05,0x10,0x40,0x00,0x0a,0x34,0xc6,0x02,0x54,
+0x83,0x83,0x92,0x15,0x00,0x00,0x00,0x00,0xac,0x83,0x00,0x24,0x8c,0xc2,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x02,0x17,0x42,0x30,0x42,0x00,0x01,0x03,0xe0,0x00,0x08,
+0xac,0x82,0x00,0x28,0x8c,0x82,0x00,0x2c,0x3c,0x06,0xb0,0x05,0x34,0xc6,0x04,0x50,
+0x00,0x02,0x18,0x43,0x30,0x63,0x00,0x01,0x10,0x40,0x00,0x04,0x30,0x45,0x00,0x01,
+0xac,0x83,0x00,0x28,0x03,0xe0,0x00,0x08,0xac,0x85,0x00,0x24,0x90,0xc2,0x00,0x00,
+0x00,0x00,0x00,0x00,0x30,0x42,0x00,0xff,0x30,0x43,0x00,0x02,0x30,0x42,0x00,0x01,
+0xac,0x83,0x00,0x28,0x03,0xe0,0x00,0x08,0xac,0x82,0x00,0x24,0x3c,0x03,0xb0,0x03,
+0x3c,0x02,0x80,0x00,0x27,0xbd,0xff,0xd8,0x34,0x63,0x00,0x20,0x24,0x42,0x4b,0xac,
+0xac,0x62,0x00,0x00,0xaf,0xb1,0x00,0x1c,0xaf,0xbf,0x00,0x20,0xaf,0xb0,0x00,0x18,
+0x90,0xa6,0x00,0x0a,0x27,0x83,0xba,0x40,0x00,0xa0,0x88,0x21,0x00,0x06,0x10,0x80,
+0x00,0x43,0x10,0x21,0x8c,0x50,0x00,0x00,0x80,0xa5,0x00,0x11,0x92,0x03,0x00,0x12,
+0x10,0xa0,0x00,0x04,0xa2,0x20,0x00,0x15,0x24,0x02,0x00,0x12,0x10,0xc2,0x00,0xd9,
+0x00,0x00,0x00,0x00,0x82,0x22,0x00,0x12,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x67,
+0x00,0x00,0x00,0x00,0xa2,0x20,0x00,0x12,0xa2,0x00,0x00,0x19,0x86,0x23,0x00,0x0c,
+0x00,0x00,0x00,0x00,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x80,
+0x27,0x83,0x96,0x60,0x00,0x43,0x10,0x21,0xa0,0x40,0x00,0x00,0x92,0x03,0x00,0x16,
+0x00,0x00,0x00,0x00,0x30,0x63,0x00,0xdf,0xa2,0x03,0x00,0x16,0x82,0x02,0x00,0x12,
+0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x20,0x00,0x00,0x00,0x00,0x92,0x23,0x00,0x08,
+0x00,0x00,0x00,0x00,0x14,0x60,0x00,0x45,0x24,0x02,0x00,0x01,0xa2,0x20,0x00,0x04,
+0x92,0x08,0x00,0x04,0x00,0x00,0x00,0x00,0x15,0x00,0x00,0x1e,0x24,0x02,0x00,0x01,
+0x92,0x07,0x00,0x0a,0xa2,0x02,0x00,0x17,0x92,0x02,0x00,0x16,0x30,0xe3,0x00,0xff,
+0x30,0x42,0x00,0xe4,0x10,0x60,0x00,0x03,0xa2,0x02,0x00,0x16,0x34,0x42,0x00,0x01,
+0xa2,0x02,0x00,0x16,0x11,0x00,0x00,0x05,0x00,0x00,0x00,0x00,0x92,0x02,0x00,0x16,
+0x00,0x00,0x00,0x00,0x34,0x42,0x00,0x02,0xa2,0x02,0x00,0x16,0x92,0x02,0x00,0x17,
+0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x08,0x00,0x00,0x00,0x00,0x96,0x02,0x00,0x06,
+0x00,0x00,0x00,0x00,0xa6,0x02,0x00,0x14,0x8f,0xbf,0x00,0x20,0x7b,0xb0,0x00,0xfc,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x28,0x96,0x02,0x00,0x00,0x08,0x00,0x13,0x36,
+0xa6,0x02,0x00,0x14,0x92,0x07,0x00,0x0a,0x00,0x00,0x00,0x00,0x14,0xe0,0x00,0x03,
+0x00,0x00,0x00,0x00,0x08,0x00,0x13,0x22,0xa2,0x00,0x00,0x17,0x96,0x04,0x00,0x00,
+0x96,0x05,0x00,0x06,0x27,0x86,0x96,0x40,0x00,0x04,0x18,0xc0,0x00,0x64,0x18,0x21,
+0x00,0x05,0x10,0xc0,0x00,0x45,0x10,0x21,0x00,0x03,0x18,0x80,0x00,0x66,0x18,0x21,
+0x00,0x02,0x10,0x80,0x00,0x46,0x10,0x21,0x8c,0x66,0x00,0x08,0x8c,0x45,0x00,0x08,
+0x3c,0x03,0x80,0x00,0x00,0xc3,0x20,0x24,0x10,0x80,0x00,0x08,0x00,0xa3,0x10,0x24,
+0x10,0x40,0x00,0x04,0x00,0x00,0x18,0x21,0x10,0x80,0x00,0x02,0x24,0x03,0x00,0x01,
+0x00,0xa6,0x18,0x2b,0x08,0x00,0x13,0x22,0xa2,0x03,0x00,0x17,0x10,0x40,0xff,0xfd,
+0x00,0xa6,0x18,0x2b,0x08,0x00,0x13,0x56,0x00,0x00,0x00,0x00,0x10,0x62,0x00,0x09,
+0x24,0x02,0x00,0x02,0x10,0x62,0x00,0x05,0x24,0x02,0x00,0x03,0x14,0x62,0xff,0xb8,
+0x00,0x00,0x00,0x00,0x08,0x00,0x13,0x1c,0xa2,0x20,0x00,0x07,0x08,0x00,0x13,0x1c,
+0xa2,0x20,0x00,0x06,0x08,0x00,0x13,0x1c,0xa2,0x20,0x00,0x05,0x82,0x22,0x00,0x10,
+0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x68,0x2c,0x62,0x00,0x02,0x10,0x40,0x00,0x48,
+0x3c,0x02,0xb0,0x09,0x92,0x25,0x00,0x08,0x00,0x00,0x00,0x00,0x30,0xa6,0x00,0xff,
+0x2c,0xc2,0x00,0x04,0x10,0x40,0x00,0x3a,0x2c,0xc2,0x00,0x10,0x3c,0x04,0xb0,0x05,
+0x34,0x84,0x02,0x29,0x90,0x83,0x00,0x00,0x24,0x02,0x00,0x01,0x00,0xc2,0x10,0x04,
+0x00,0x02,0x10,0x27,0x00,0x62,0x18,0x24,0xa0,0x83,0x00,0x00,0x86,0x23,0x00,0x0c,
+0x96,0x26,0x00,0x0c,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,0x00,0x02,0x28,0x80,
+0x27,0x83,0x96,0x44,0x00,0xa3,0x18,0x21,0x8c,0x64,0x00,0x18,0x00,0x00,0x00,0x00,
+0x8c,0x82,0x00,0x04,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x10,0x10,0x40,0x00,0x18,
+0x00,0x00,0x00,0x00,0x93,0x82,0x91,0x51,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x01,
+0x14,0x40,0x00,0x0a,0x24,0x05,0x00,0x24,0x00,0x06,0x2c,0x00,0x00,0x05,0x2c,0x03,
+0x0c,0x00,0x1f,0xdd,0x02,0x00,0x20,0x21,0x92,0x02,0x00,0x16,0xa2,0x00,0x00,0x12,
+0x30,0x42,0x00,0xe7,0x08,0x00,0x13,0x13,0xa2,0x02,0x00,0x16,0xf0,0xc5,0x00,0x06,
+0x00,0x00,0x28,0x12,0x27,0x82,0x96,0x40,0x00,0xa2,0x28,0x21,0x0c,0x00,0x01,0x49,
+0x3c,0x04,0x00,0x80,0x96,0x26,0x00,0x0c,0x08,0x00,0x13,0x93,0x00,0x06,0x2c,0x00,
+0x27,0x83,0x96,0x50,0x27,0x82,0x96,0x58,0x00,0xa2,0x10,0x21,0x00,0xa3,0x18,0x21,
+0x90,0x44,0x00,0x00,0x90,0x65,0x00,0x05,0x00,0x00,0x30,0x21,0x0c,0x00,0x25,0xc4,
+0x24,0x07,0x00,0x01,0x96,0x26,0x00,0x0c,0x08,0x00,0x13,0x8d,0x00,0x00,0x00,0x00,
+0x14,0x40,0xff,0xce,0x3c,0x04,0xb0,0x05,0x34,0x84,0x02,0x29,0x90,0x83,0x00,0x00,
+0x30,0xa5,0x00,0x0f,0x24,0x02,0x00,0x80,0x08,0x00,0x13,0x7c,0x00,0xa2,0x10,0x07,
+0x86,0x26,0x00,0x0c,0x3c,0x03,0xb0,0x09,0x34,0x42,0x01,0x72,0x34,0x63,0x01,0x78,
+0x94,0x47,0x00,0x00,0x8c,0x65,0x00,0x00,0x00,0x06,0x10,0xc0,0x00,0x46,0x10,0x21,
+0x3c,0x04,0xb0,0x09,0xae,0x25,0x00,0x1c,0x34,0x84,0x01,0x7c,0x27,0x83,0x96,0x44,
+0x00,0x02,0x10,0x80,0x8c,0x85,0x00,0x00,0x00,0x43,0x10,0x21,0x8c,0x43,0x00,0x18,
+0xae,0x25,0x00,0x20,0xa6,0x27,0x00,0x18,0x8c,0x66,0x00,0x08,0x02,0x20,0x20,0x21,
+0x0c,0x00,0x13,0xe2,0x00,0x00,0x28,0x21,0x86,0x25,0x00,0x18,0x8e,0x26,0x00,0x1c,
+0x8e,0x27,0x00,0x20,0x02,0x20,0x20,0x21,0x0c,0x00,0x20,0xdf,0xaf,0xa2,0x00,0x10,
+0x08,0x00,0x13,0x13,0xa2,0x02,0x00,0x12,0x92,0x22,0x00,0x08,0x08,0x00,0x13,0x13,
+0xa2,0x22,0x00,0x09,0xa2,0x20,0x00,0x11,0x80,0x82,0x00,0x50,0x00,0x00,0x00,0x00,
+0x10,0x40,0x00,0x03,0x3c,0x02,0xb0,0x03,0x34,0x42,0x00,0xd0,0xac,0x40,0x00,0x00,
+0x08,0x00,0x13,0x13,0xa0,0x80,0x00,0x50,0x94,0x8a,0x00,0x0c,0x24,0x03,0x00,0x24,
+0x00,0x80,0x70,0x21,0x3c,0x02,0x80,0x00,0x3c,0x04,0xb0,0x03,0x24,0x42,0x4f,0x88,
+0xf1,0x43,0x00,0x06,0x34,0x84,0x00,0x20,0x00,0x00,0x18,0x12,0x00,0xa0,0x68,0x21,
+0xac,0x82,0x00,0x00,0x27,0x85,0x96,0x50,0x27,0x82,0x96,0x4f,0x27,0xbd,0xff,0xf8,
+0x00,0x62,0x60,0x21,0x00,0x65,0x58,0x21,0x00,0x00,0xc0,0x21,0x11,0xa0,0x00,0xcc,
+0x00,0x00,0x78,0x21,0x00,0x0a,0x1c,0x00,0x00,0x03,0x1c,0x03,0x00,0x03,0x10,0xc0,
+0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x80,0x00,0x45,0x10,0x21,0x91,0x87,0x00,0x00,
+0x80,0x48,0x00,0x04,0x03,0xa0,0x60,0x21,0x00,0x0a,0x1c,0x00,0x00,0x03,0x1c,0x03,
+0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,0x00,0x02,0x48,0x80,0x27,0x83,0x96,0x44,
+0xa3,0xa7,0x00,0x00,0x01,0x23,0x18,0x21,0x8c,0x64,0x00,0x18,0x25,0x02,0xff,0xff,
+0x00,0x48,0x40,0x0b,0x8c,0x83,0x00,0x04,0x2d,0x05,0x00,0x07,0x24,0x02,0x00,0x06,
+0x30,0x63,0x00,0x08,0x14,0x60,0x00,0x35,0x00,0x45,0x40,0x0a,0x93,0xa7,0x00,0x00,
+0x27,0x82,0x96,0x58,0x01,0x22,0x10,0x21,0x30,0xe3,0x00,0xf0,0x38,0x63,0x00,0x50,
+0x30,0xe5,0x00,0xff,0x00,0x05,0x20,0x2b,0x00,0x03,0x18,0x2b,0x00,0x64,0x18,0x24,
+0x90,0x49,0x00,0x00,0x10,0x60,0x00,0x16,0x30,0xe4,0x00,0x0f,0x24,0x02,0x00,0x04,
+0x10,0xa2,0x00,0x9d,0x00,0x00,0x00,0x00,0x11,0xa0,0x00,0x3a,0x2c,0xa2,0x00,0x0c,
+0x10,0x40,0x00,0x02,0x24,0x84,0x00,0x0c,0x00,0xe0,0x20,0x21,0x30,0x84,0x00,0xff,
+0x00,0x04,0x10,0x40,0x27,0x83,0xc1,0x5c,0x00,0x44,0x10,0x21,0x00,0x43,0x10,0x21,
+0x90,0x47,0x00,0x00,0x00,0x00,0x00,0x00,0x2c,0xe3,0x00,0x0c,0xa3,0xa7,0x00,0x00,
+0x10,0x60,0x00,0x02,0x24,0xe2,0x00,0x04,0x00,0xe0,0x10,0x21,0xa3,0xa2,0x00,0x00,
+0x91,0x65,0x00,0x00,0x91,0x82,0x00,0x00,0x30,0xa3,0x00,0xff,0x00,0x62,0x10,0x2b,
+0x10,0x40,0x00,0x0e,0x2c,0x62,0x00,0x0c,0x14,0x40,0x00,0x03,0x00,0x60,0x20,0x21,
+0x30,0xa2,0x00,0x0f,0x24,0x44,0x00,0x0c,0x00,0x04,0x10,0x40,0x00,0x44,0x20,0x21,
+0x27,0x83,0xc1,0x5c,0x00,0x83,0x18,0x21,0x90,0x62,0x00,0x02,0x00,0x00,0x00,0x00,
+0x10,0x40,0x00,0x05,0x00,0x09,0x11,0x00,0xa1,0x85,0x00,0x00,0x93,0xa2,0x00,0x00,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x08,0x00,0x49,0x10,0x23,0x00,0x02,0x10,0x80,
+0x00,0x49,0x10,0x23,0x00,0x02,0x10,0x80,0x00,0x44,0x10,0x21,0x27,0x83,0xba,0xe8,
+0x00,0x43,0x10,0x21,0x90,0x44,0x00,0x00,0x00,0x00,0x00,0x00,0x2c,0x83,0x00,0x0c,
+0x14,0x60,0x00,0x06,0x00,0x80,0x10,0x21,0x00,0x18,0x10,0x40,0x00,0x4f,0x10,0x21,
+0x00,0x02,0x11,0x00,0x00,0x82,0x10,0x21,0x24,0x42,0x00,0x04,0x08,0x00,0x14,0x43,
+0xa1,0x82,0x00,0x00,0x8f,0x8d,0x87,0xf0,0x00,0x00,0x00,0x00,0x01,0xa8,0x10,0x21,
+0x90,0x43,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x60,0xff,0xd1,0x00,0x00,0x28,0x21,
+0x00,0x06,0x74,0x82,0x30,0xe2,0x00,0xff,0x2c,0x42,0x00,0x0c,0x14,0x40,0x00,0x03,
+0x00,0xe0,0x10,0x21,0x30,0xe2,0x00,0x0f,0x24,0x42,0x00,0x0c,0x30,0x44,0x00,0xff,
+0xa3,0xa2,0x00,0x00,0x24,0x02,0x00,0x0c,0x10,0x82,0x00,0x0d,0x00,0x09,0x11,0x00,
+0x00,0x49,0x10,0x23,0x00,0x02,0x10,0x80,0x00,0x04,0x18,0x40,0x00,0x49,0x10,0x23,
+0x00,0x64,0x18,0x21,0x00,0x02,0x10,0x80,0x00,0x43,0x10,0x21,0x27,0x84,0xba,0xe8,
+0x00,0x44,0x10,0x21,0x90,0x47,0x00,0x00,0x00,0x00,0x00,0x00,0xa3,0xa7,0x00,0x00,
+0x00,0x0a,0x1c,0x00,0x00,0x03,0x1c,0x03,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,
+0x00,0x02,0x10,0x80,0x27,0x83,0x96,0x44,0x00,0x43,0x10,0x21,0x8c,0x44,0x00,0x18,
+0x00,0x00,0x00,0x00,0x8c,0x83,0x00,0x04,0x00,0x00,0x00,0x00,0x30,0x63,0x00,0x10,
+0x14,0x60,0x00,0x33,0x00,0x06,0x14,0x42,0x00,0x09,0x11,0x00,0x00,0x49,0x10,0x23,
+0x00,0x02,0x10,0x80,0x00,0x49,0x10,0x23,0x27,0x83,0xbb,0xb8,0x00,0x02,0x10,0x80,
+0x00,0x43,0x10,0x21,0x90,0x44,0x00,0x04,0x90,0x43,0x00,0x05,0x00,0x00,0x00,0x00,
+0x00,0x64,0xc0,0x24,0x93,0xa7,0x00,0x00,0x00,0x00,0x00,0x00,0x2c,0xe2,0x00,0x0f,
+0x10,0x40,0x00,0x0f,0x31,0xcf,0x00,0x01,0x00,0x0a,0x1c,0x00,0x00,0x03,0x1c,0x03,
+0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x80,0x27,0x84,0x96,0x40,
+0x00,0x44,0x10,0x21,0x84,0x43,0x00,0x06,0x00,0x00,0x00,0x00,0x28,0x63,0x06,0x41,
+0x14,0x60,0x00,0x04,0x30,0xe2,0x00,0xff,0x24,0x07,0x00,0x0f,0xa3,0xa7,0x00,0x00,
+0x30,0xe2,0x00,0xff,0x2c,0x42,0x00,0x0c,0x14,0x40,0x00,0x06,0x00,0xe0,0x10,0x21,
+0x00,0x18,0x10,0x40,0x00,0x4f,0x10,0x21,0x00,0x02,0x11,0x00,0x00,0x47,0x10,0x21,
+0x24,0x42,0x00,0x04,0xa3,0xa2,0x00,0x00,0x00,0x40,0x38,0x21,0x01,0xa8,0x10,0x21,
+0x90,0x43,0x00,0x00,0x24,0xa4,0x00,0x01,0x30,0x85,0xff,0xff,0x00,0xa3,0x18,0x2b,
+0x14,0x60,0xff,0xad,0x30,0xe2,0x00,0xff,0x08,0x00,0x14,0x30,0x00,0x00,0x00,0x00,
+0x08,0x00,0x14,0x91,0x30,0x58,0x00,0x01,0x81,0xc2,0x00,0x48,0x00,0x00,0x00,0x00,
+0x10,0x40,0xff,0x73,0x00,0x00,0x00,0x00,0x08,0x00,0x14,0x1e,0x00,0x00,0x00,0x00,
+0x00,0x0a,0x1c,0x00,0x00,0x03,0x1c,0x03,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,
+0x00,0x02,0x10,0x80,0x00,0x45,0x10,0x21,0x80,0x48,0x00,0x05,0x91,0x67,0x00,0x00,
+0x08,0x00,0x13,0xfe,0x03,0xa0,0x58,0x21,0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,
+0x34,0x63,0x00,0x20,0x24,0x42,0x53,0x28,0x03,0xe0,0x00,0x08,0xac,0x62,0x00,0x00,
+0x27,0xbd,0xff,0xc0,0xaf,0xb7,0x00,0x34,0xaf,0xb6,0x00,0x30,0xaf,0xb5,0x00,0x2c,
+0xaf,0xb4,0x00,0x28,0xaf,0xb3,0x00,0x24,0xaf,0xb2,0x00,0x20,0xaf,0xbf,0x00,0x3c,
+0xaf,0xbe,0x00,0x38,0xaf,0xb1,0x00,0x1c,0xaf,0xb0,0x00,0x18,0x84,0x82,0x00,0x0c,
+0x27,0x93,0x96,0x44,0x3c,0x05,0xb0,0x03,0x00,0x02,0x18,0xc0,0x00,0x62,0x18,0x21,
+0x00,0x03,0x18,0x80,0x00,0x73,0x10,0x21,0x8c,0x5e,0x00,0x18,0x3c,0x02,0x80,0x00,
+0x34,0xa5,0x00,0x20,0x24,0x42,0x53,0x40,0xac,0xa2,0x00,0x00,0x8f,0xd0,0x00,0x08,
+0x27,0x95,0x96,0x50,0x00,0x75,0x18,0x21,0x00,0x00,0x28,0x21,0x02,0x00,0x30,0x21,
+0x90,0x71,0x00,0x00,0x0c,0x00,0x13,0xe2,0x00,0x80,0xb0,0x21,0x00,0x40,0x90,0x21,
+0x00,0x10,0x14,0x42,0x30,0x54,0x00,0x01,0x02,0x40,0x20,0x21,0x00,0x10,0x14,0x82,
+0x02,0x80,0x28,0x21,0x12,0x51,0x00,0x23,0x00,0x10,0xbf,0xc2,0x86,0xc3,0x00,0x0c,
+0x30,0x50,0x00,0x01,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x80,
+0x00,0x55,0x10,0x21,0xa0,0x52,0x00,0x00,0x86,0xc3,0x00,0x0c,0x00,0x00,0x00,0x00,
+0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x80,0x00,0x53,0x30,0x21,
+0x8c,0xc7,0x00,0x18,0x27,0x83,0x96,0x40,0x00,0x43,0x10,0x21,0x8c,0xe3,0x00,0x04,
+0x84,0x46,0x00,0x06,0x00,0x03,0x19,0x42,0x0c,0x00,0x0d,0xd7,0x30,0x73,0x00,0x01,
+0x00,0x40,0x88,0x21,0x02,0x40,0x20,0x21,0x02,0x80,0x28,0x21,0x16,0xe0,0x00,0x10,
+0x02,0x00,0x30,0x21,0x86,0xc2,0x00,0x0c,0x00,0x00,0x00,0x00,0x00,0x02,0x18,0xc0,
+0x00,0x62,0x18,0x21,0x00,0x03,0x18,0x80,0x27,0x82,0x96,0x48,0x00,0x62,0x18,0x21,
+0xa4,0x71,0x00,0x04,0x7b,0xbe,0x01,0xfc,0x7b,0xb6,0x01,0xbc,0x7b,0xb4,0x01,0x7c,
+0x7b,0xb2,0x01,0x3c,0x7b,0xb0,0x00,0xfc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x40,
+0x86,0xc3,0x00,0x0c,0xaf,0xb3,0x00,0x10,0xaf,0xa0,0x00,0x14,0x00,0x03,0x10,0xc0,
+0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x80,0x00,0x55,0x10,0x21,0x80,0x47,0x00,0x06,
+0x00,0x00,0x00,0x00,0x24,0xe7,0x00,0x02,0x00,0x07,0x17,0xc2,0x00,0xe2,0x38,0x21,
+0x00,0x07,0x38,0x43,0x00,0x07,0x38,0x40,0x0c,0x00,0x0d,0xfe,0x03,0xc7,0x38,0x21,
+0x08,0x00,0x15,0x11,0x02,0x22,0x88,0x21,0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,
+0x27,0xbd,0xff,0xd0,0x34,0x63,0x00,0x20,0x24,0x42,0x54,0xc8,0xaf,0xb2,0x00,0x20,
+0xac,0x62,0x00,0x00,0xaf,0xbf,0x00,0x28,0xaf,0xb3,0x00,0x24,0xaf,0xb1,0x00,0x1c,
+0xaf,0xb0,0x00,0x18,0x3c,0x02,0xb0,0x03,0x90,0x83,0x00,0x0a,0x34,0x42,0x01,0x04,
+0x94,0x45,0x00,0x00,0x00,0x03,0x18,0x80,0x27,0x82,0xba,0x40,0x00,0x62,0x18,0x21,
+0x30,0xa6,0xff,0xff,0x8c,0x71,0x00,0x00,0x80,0x85,0x00,0x12,0x30,0xc8,0x00,0xff,
+0x00,0x06,0x32,0x02,0xa4,0x86,0x00,0x44,0xa4,0x88,0x00,0x46,0x82,0x22,0x00,0x12,
+0x00,0x80,0x90,0x21,0x10,0xa0,0x00,0x1b,0xa0,0x80,0x00,0x15,0x00,0xc5,0x10,0x2a,
+0x10,0x40,0x00,0x14,0x00,0x00,0x00,0x00,0xa2,0x20,0x00,0x19,0x84,0x83,0x00,0x0c,
+0x00,0x00,0x00,0x00,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x80,
+0x27,0x83,0x96,0x60,0x00,0x43,0x10,0x21,0xa0,0x40,0x00,0x00,0xa0,0x80,0x00,0x12,
+0x92,0x22,0x00,0x16,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0xdf,0xa2,0x22,0x00,0x16,
+0x8f,0xbf,0x00,0x28,0x7b,0xb2,0x01,0x3c,0x7b,0xb0,0x00,0xfc,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x30,0x0c,0x00,0x14,0xca,0x00,0x00,0x00,0x00,0x08,0x00,0x15,0x60,
+0x00,0x00,0x00,0x00,0x28,0x42,0x00,0x02,0x10,0x40,0x01,0x65,0x00,0x00,0x28,0x21,
+0x84,0x83,0x00,0x0c,0x27,0x84,0x96,0x50,0x96,0x47,0x00,0x0c,0x00,0x03,0x10,0xc0,
+0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x80,0x27,0x83,0x96,0x48,0x00,0x43,0x18,0x21,
+0x80,0x65,0x00,0x06,0x00,0x44,0x10,0x21,0x80,0x49,0x00,0x05,0x38,0xa5,0x00,0x00,
+0x80,0x4a,0x00,0x04,0x15,0x20,0x00,0x27,0x01,0x05,0x30,0x0b,0x15,0x40,0x00,0x11,
+0x30,0xe3,0xff,0xff,0x92,0x45,0x00,0x08,0x00,0x00,0x00,0x00,0x30,0xa8,0x00,0xff,
+0x2d,0x02,0x00,0x04,0x10,0x40,0x01,0x45,0x2d,0x02,0x00,0x10,0x3c,0x04,0xb0,0x05,
+0x34,0x84,0x02,0x29,0x90,0x83,0x00,0x00,0x24,0x02,0x00,0x01,0x01,0x02,0x10,0x04,
+0x00,0x62,0x18,0x25,0xa0,0x83,0x00,0x00,0x96,0x47,0x00,0x0c,0x00,0x00,0x00,0x00,
+0x30,0xe3,0xff,0xff,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,0x27,0x84,0x96,0x50,
+0x00,0x02,0x10,0x80,0x00,0x44,0x10,0x21,0x80,0x45,0x00,0x06,0x00,0x03,0x1a,0x00,
+0x3c,0x04,0xb0,0x00,0x00,0x65,0x18,0x21,0x00,0x64,0x28,0x21,0x94,0xa2,0x00,0x00,
+0x82,0x43,0x00,0x10,0x00,0x02,0x14,0x00,0x14,0x60,0x00,0x06,0x00,0x02,0x24,0x03,
+0x30,0x82,0x00,0x04,0x14,0x40,0x00,0x04,0x01,0x49,0x10,0x21,0x34,0x82,0x08,0x00,
+0xa4,0xa2,0x00,0x00,0x01,0x49,0x10,0x21,0x00,0x02,0x16,0x00,0x00,0x02,0x16,0x03,
+0x00,0x46,0x10,0x2a,0x10,0x40,0x00,0x7c,0x00,0x00,0x00,0x00,0x82,0x42,0x00,0x10,
+0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x0e,0x00,0x00,0x00,0x00,0x86,0x43,0x00,0x0c,
+0x25,0x44,0x00,0x01,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x80,
+0x27,0x83,0x96,0x50,0x00,0x43,0x10,0x21,0xa0,0x44,0x00,0x04,0x92,0x23,0x00,0x16,
+0x02,0x40,0x20,0x21,0x30,0x63,0x00,0xfb,0x08,0x00,0x15,0x65,0xa2,0x23,0x00,0x16,
+0x86,0x43,0x00,0x0c,0x25,0x24,0x00,0x01,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,
+0x00,0x02,0x10,0x80,0x27,0x83,0x96,0x50,0x00,0x43,0x10,0x21,0xa0,0x44,0x00,0x05,
+0x86,0x45,0x00,0x0c,0x0c,0x00,0x23,0x1c,0x02,0x20,0x20,0x21,0x10,0x40,0x00,0x5a,
+0x00,0x00,0x00,0x00,0x92,0x45,0x00,0x08,0x00,0x00,0x00,0x00,0x30,0xa6,0x00,0xff,
+0x2c,0xc2,0x00,0x04,0x10,0x40,0x00,0x4c,0x2c,0xc2,0x00,0x10,0x3c,0x04,0xb0,0x05,
+0x34,0x84,0x02,0x29,0x90,0x83,0x00,0x00,0x24,0x02,0x00,0x01,0x00,0xc2,0x10,0x04,
+0x00,0x02,0x10,0x27,0x00,0x62,0x18,0x24,0xa0,0x83,0x00,0x00,0x92,0x45,0x00,0x08,
+0x00,0x00,0x00,0x00,0x30,0xa5,0x00,0xff,0x14,0xa0,0x00,0x33,0x24,0x02,0x00,0x01,
+0xa2,0x40,0x00,0x04,0x92,0x22,0x00,0x04,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x0c,
+0x24,0x02,0x00,0x01,0xa2,0x22,0x00,0x17,0x92,0x22,0x00,0x17,0x00,0x00,0x00,0x00,
+0x10,0x40,0x00,0x04,0x00,0x00,0x00,0x00,0x96,0x22,0x00,0x06,0x08,0x00,0x15,0x60,
+0xa6,0x22,0x00,0x14,0x96,0x22,0x00,0x00,0x08,0x00,0x15,0x60,0xa6,0x22,0x00,0x14,
+0x92,0x22,0x00,0x0a,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x03,0x00,0x00,0x00,0x00,
+0x08,0x00,0x15,0xde,0xa2,0x20,0x00,0x17,0x96,0x24,0x00,0x00,0x96,0x25,0x00,0x06,
+0x27,0x86,0x96,0x40,0x00,0x04,0x18,0xc0,0x00,0x64,0x18,0x21,0x00,0x05,0x10,0xc0,
+0x00,0x45,0x10,0x21,0x00,0x03,0x18,0x80,0x00,0x66,0x18,0x21,0x00,0x02,0x10,0x80,
+0x00,0x46,0x10,0x21,0x8c,0x65,0x00,0x08,0x8c,0x44,0x00,0x08,0x3c,0x03,0x80,0x00,
+0x00,0xa3,0x30,0x24,0x10,0xc0,0x00,0x08,0x00,0x83,0x10,0x24,0x10,0x40,0x00,0x04,
+0x00,0x00,0x18,0x21,0x10,0xc0,0x00,0x02,0x24,0x03,0x00,0x01,0x00,0x85,0x18,0x2b,
+0x08,0x00,0x15,0xde,0xa2,0x23,0x00,0x17,0x10,0x40,0xff,0xfd,0x00,0x85,0x18,0x2b,
+0x08,0x00,0x16,0x01,0x00,0x00,0x00,0x00,0x10,0xa2,0x00,0x09,0x24,0x02,0x00,0x02,
+0x10,0xa2,0x00,0x05,0x24,0x02,0x00,0x03,0x14,0xa2,0xff,0xca,0x00,0x00,0x00,0x00,
+0x08,0x00,0x15,0xd9,0xa2,0x40,0x00,0x07,0x08,0x00,0x15,0xd9,0xa2,0x40,0x00,0x06,
+0x08,0x00,0x15,0xd9,0xa2,0x40,0x00,0x05,0x14,0x40,0xff,0xbe,0x3c,0x04,0xb0,0x05,
+0x34,0x84,0x02,0x29,0x90,0x83,0x00,0x00,0x30,0xa5,0x00,0x0f,0x24,0x02,0x00,0x80,
+0x08,0x00,0x15,0xd0,0x00,0xa2,0x10,0x07,0x0c,0x00,0x14,0xd0,0x02,0x40,0x20,0x21,
+0x08,0x00,0x15,0x60,0x00,0x00,0x00,0x00,0x92,0x45,0x00,0x08,0x00,0x00,0x00,0x00,
+0x30,0xa6,0x00,0xff,0x2c,0xc2,0x00,0x04,0x10,0x40,0x00,0x98,0x2c,0xc2,0x00,0x10,
+0x3c,0x04,0xb0,0x05,0x34,0x84,0x02,0x29,0x90,0x83,0x00,0x00,0x24,0x02,0x00,0x01,
+0x00,0xc2,0x10,0x04,0x00,0x02,0x10,0x27,0x00,0x62,0x18,0x24,0xa0,0x83,0x00,0x00,
+0x92,0x45,0x00,0x08,0x00,0x00,0x00,0x00,0x30,0xa5,0x00,0xff,0x14,0xa0,0x00,0x7f,
+0x24,0x02,0x00,0x01,0xa2,0x40,0x00,0x04,0x86,0x43,0x00,0x0c,0x27,0x93,0x96,0x44,
+0x96,0x47,0x00,0x0c,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,0x00,0x02,0x28,0x80,
+0x00,0xb3,0x18,0x21,0x8c,0x64,0x00,0x18,0x00,0x00,0x00,0x00,0x8c,0x82,0x00,0x04,
+0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x10,0x10,0x40,0x00,0x64,0x00,0x00,0x00,0x00,
+0x00,0x07,0x1c,0x00,0x00,0x03,0x1c,0x03,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,
+0x00,0x02,0x10,0x80,0x00,0x53,0x10,0x21,0x8c,0x43,0x00,0x18,0x93,0x82,0x91,0x51,
+0x8c,0x64,0x00,0x04,0x30,0x42,0x00,0x01,0x00,0x04,0x21,0x42,0x14,0x40,0x00,0x4d,
+0x30,0x90,0x00,0x01,0x00,0x07,0x2c,0x00,0x00,0x05,0x2c,0x03,0x0c,0x00,0x1f,0xdd,
+0x02,0x20,0x20,0x21,0x96,0x26,0x00,0x06,0x12,0x00,0x00,0x14,0x30,0xc5,0xff,0xff,
+0x02,0x60,0x90,0x21,0x00,0x05,0x10,0xc0,0x00,0x45,0x10,0x21,0x00,0x02,0x10,0x80,
+0x00,0x52,0x18,0x21,0x92,0x22,0x00,0x0a,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x0b,
+0x02,0x20,0x20,0x21,0x8c,0x63,0x00,0x18,0x00,0x00,0x00,0x00,0x8c,0x62,0x00,0x04,
+0x00,0x00,0x00,0x00,0x00,0x02,0x11,0x42,0x0c,0x00,0x1f,0xdd,0x30,0x50,0x00,0x01,
+0x96,0x26,0x00,0x06,0x16,0x00,0xff,0xef,0x30,0xc5,0xff,0xff,0x92,0x22,0x00,0x04,
+0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x0d,0x24,0x02,0x00,0x01,0xa2,0x22,0x00,0x17,
+0x92,0x22,0x00,0x17,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x05,0x00,0x00,0x00,0x00,
+0xa6,0x26,0x00,0x14,0x92,0x22,0x00,0x16,0x08,0x00,0x15,0x5f,0x30,0x42,0x00,0xc3,
+0x96,0x22,0x00,0x00,0x08,0x00,0x16,0x75,0xa6,0x22,0x00,0x14,0x92,0x22,0x00,0x0a,
+0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x03,0x00,0x00,0x00,0x00,0x08,0x00,0x16,0x70,
+0xa2,0x20,0x00,0x17,0x96,0x24,0x00,0x00,0x30,0xc5,0xff,0xff,0x00,0x05,0x18,0xc0,
+0x00,0x04,0x10,0xc0,0x00,0x44,0x10,0x21,0x00,0x65,0x18,0x21,0x27,0x84,0x96,0x40,
+0x00,0x02,0x10,0x80,0x00,0x44,0x10,0x21,0x00,0x03,0x18,0x80,0x8c,0x45,0x00,0x08,
+0x00,0x64,0x18,0x21,0x8c,0x64,0x00,0x08,0x3c,0x02,0x80,0x00,0x00,0xa2,0x38,0x24,
+0x10,0xe0,0x00,0x08,0x00,0x82,0x10,0x24,0x10,0x40,0x00,0x04,0x00,0x00,0x18,0x21,
+0x10,0xe0,0x00,0x02,0x24,0x03,0x00,0x01,0x00,0x85,0x18,0x2b,0x08,0x00,0x16,0x70,
+0xa2,0x23,0x00,0x17,0x10,0x40,0xff,0xfd,0x00,0x85,0x18,0x2b,0x08,0x00,0x16,0x94,
+0x00,0x00,0x00,0x00,0x24,0x05,0x00,0x24,0xf0,0xe5,0x00,0x06,0x00,0x00,0x28,0x12,
+0x27,0x82,0x96,0x40,0x00,0xa2,0x28,0x21,0x0c,0x00,0x01,0x49,0x00,0x00,0x20,0x21,
+0x96,0x47,0x00,0x0c,0x08,0x00,0x16,0x52,0x00,0x07,0x2c,0x00,0x27,0x83,0x96,0x50,
+0x27,0x82,0x96,0x58,0x00,0xa2,0x10,0x21,0x00,0xa3,0x18,0x21,0x90,0x44,0x00,0x00,
+0x90,0x65,0x00,0x05,0x24,0x07,0x00,0x01,0x0c,0x00,0x25,0xc4,0x00,0x00,0x30,0x21,
+0x96,0x47,0x00,0x0c,0x08,0x00,0x16,0x45,0x00,0x07,0x1c,0x00,0x10,0xa2,0x00,0x09,
+0x24,0x02,0x00,0x02,0x10,0xa2,0x00,0x05,0x24,0x02,0x00,0x03,0x14,0xa2,0xff,0x7e,
+0x00,0x00,0x00,0x00,0x08,0x00,0x16,0x36,0xa2,0x40,0x00,0x07,0x08,0x00,0x16,0x36,
+0xa2,0x40,0x00,0x06,0x08,0x00,0x16,0x36,0xa2,0x40,0x00,0x05,0x14,0x40,0xff,0x72,
+0x3c,0x04,0xb0,0x05,0x34,0x84,0x02,0x29,0x90,0x83,0x00,0x00,0x30,0xa5,0x00,0x0f,
+0x24,0x02,0x00,0x80,0x08,0x00,0x16,0x2d,0x00,0xa2,0x10,0x07,0x14,0x40,0xfe,0xc4,
+0x00,0x00,0x00,0x00,0x3c,0x04,0xb0,0x05,0x34,0x84,0x02,0x29,0x90,0x83,0x00,0x00,
+0x30,0xa5,0x00,0x0f,0x24,0x02,0x00,0x80,0x08,0x00,0x15,0x88,0x00,0xa2,0x10,0x07,
+0x84,0x83,0x00,0x0c,0x00,0x00,0x00,0x00,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,
+0x00,0x02,0x10,0x80,0x27,0x83,0x96,0x44,0x00,0x43,0x10,0x21,0x8c,0x47,0x00,0x18,
+0x00,0x00,0x00,0x00,0x8c,0xe6,0x00,0x08,0x0c,0x00,0x13,0xe2,0x00,0x00,0x00,0x00,
+0x02,0x40,0x20,0x21,0x00,0x00,0x28,0x21,0x00,0x00,0x30,0x21,0x00,0x00,0x38,0x21,
+0x0c,0x00,0x20,0xdf,0xaf,0xa2,0x00,0x10,0x00,0x02,0x1e,0x00,0x14,0x60,0xfe,0x7c,
+0xa2,0x22,0x00,0x12,0x92,0x43,0x00,0x08,0x00,0x00,0x00,0x00,0x14,0x60,0x00,0x40,
+0x24,0x02,0x00,0x01,0xa2,0x40,0x00,0x04,0x92,0x28,0x00,0x04,0x00,0x00,0x00,0x00,
+0x15,0x00,0x00,0x19,0x24,0x02,0x00,0x01,0x92,0x27,0x00,0x0a,0xa2,0x22,0x00,0x17,
+0x92,0x22,0x00,0x17,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x10,0x00,0x00,0x00,0x00,
+0x96,0x22,0x00,0x06,0x00,0x00,0x00,0x00,0xa6,0x22,0x00,0x14,0x92,0x22,0x00,0x16,
+0x30,0xe3,0x00,0xff,0x30,0x42,0x00,0xc0,0x10,0x60,0x00,0x03,0xa2,0x22,0x00,0x16,
+0x34,0x42,0x00,0x01,0xa2,0x22,0x00,0x16,0x11,0x00,0xfe,0x61,0x00,0x00,0x00,0x00,
+0x92,0x22,0x00,0x16,0x08,0x00,0x15,0x5f,0x34,0x42,0x00,0x02,0x96,0x22,0x00,0x00,
+0x08,0x00,0x16,0xf7,0xa6,0x22,0x00,0x14,0x92,0x27,0x00,0x0a,0x00,0x00,0x00,0x00,
+0x14,0xe0,0x00,0x03,0x00,0x00,0x00,0x00,0x08,0x00,0x16,0xf0,0xa2,0x20,0x00,0x17,
+0x96,0x24,0x00,0x00,0x96,0x25,0x00,0x06,0x27,0x86,0x96,0x40,0x00,0x04,0x18,0xc0,
+0x00,0x64,0x18,0x21,0x00,0x05,0x10,0xc0,0x00,0x45,0x10,0x21,0x00,0x03,0x18,0x80,
+0x00,0x66,0x18,0x21,0x00,0x02,0x10,0x80,0x00,0x46,0x10,0x21,0x8c,0x65,0x00,0x08,
+0x8c,0x44,0x00,0x08,0x3c,0x03,0x80,0x00,0x00,0xa3,0x30,0x24,0x10,0xc0,0x00,0x08,
+0x00,0x83,0x10,0x24,0x10,0x40,0x00,0x04,0x00,0x00,0x18,0x21,0x10,0xc0,0x00,0x02,
+0x24,0x03,0x00,0x01,0x00,0x85,0x18,0x2b,0x08,0x00,0x16,0xf0,0xa2,0x23,0x00,0x17,
+0x10,0x40,0xff,0xfd,0x00,0x85,0x18,0x2b,0x08,0x00,0x17,0x1f,0x00,0x00,0x00,0x00,
+0x10,0x62,0x00,0x09,0x24,0x02,0x00,0x02,0x10,0x62,0x00,0x05,0x24,0x02,0x00,0x03,
+0x14,0x62,0xff,0xbd,0x00,0x00,0x00,0x00,0x08,0x00,0x16,0xea,0xa2,0x40,0x00,0x07,
+0x08,0x00,0x16,0xea,0xa2,0x40,0x00,0x06,0x08,0x00,0x16,0xea,0xa2,0x40,0x00,0x05,
+0x3c,0x02,0x80,0x00,0x00,0x82,0x30,0x24,0x10,0xc0,0x00,0x08,0x00,0xa2,0x18,0x24,
+0x10,0x60,0x00,0x04,0x00,0x00,0x10,0x21,0x10,0xc0,0x00,0x02,0x24,0x02,0x00,0x01,
+0x00,0xa4,0x10,0x2b,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x10,0x60,0xff,0xfd,
+0x00,0xa4,0x10,0x2b,0x08,0x00,0x17,0x3a,0x00,0x00,0x00,0x00,0x30,0x82,0xff,0xff,
+0x00,0x02,0x18,0xc0,0x00,0x62,0x18,0x21,0x27,0x84,0x96,0x50,0x00,0x03,0x18,0x80,
+0x00,0x64,0x18,0x21,0x80,0x66,0x00,0x06,0x00,0x02,0x12,0x00,0x3c,0x03,0xb0,0x00,
+0x00,0x46,0x10,0x21,0x00,0x45,0x10,0x21,0x03,0xe0,0x00,0x08,0x00,0x43,0x10,0x21,
+0x27,0xbd,0xff,0xe0,0x30,0x82,0x00,0x7c,0x30,0x84,0xff,0x00,0xaf,0xbf,0x00,0x1c,
+0xaf,0xb2,0x00,0x18,0xaf,0xb1,0x00,0x14,0xaf,0xb0,0x00,0x10,0x14,0x40,0x00,0x41,
+0x00,0x04,0x22,0x03,0x24,0x02,0x00,0x04,0x3c,0x10,0xb0,0x03,0x8e,0x10,0x00,0x00,
+0x10,0x82,0x00,0x32,0x24,0x02,0x00,0x08,0x10,0x82,0x00,0x03,0x32,0x02,0x00,0x20,
+0x08,0x00,0x17,0x60,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x17,0x3c,0x02,0xb0,0x06,
+0x34,0x42,0x80,0x24,0x8c,0x43,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x67,0x00,0xff,
+0x10,0xe0,0x00,0x23,0x00,0x00,0x88,0x21,0x8f,0x85,0x96,0x20,0x00,0x40,0x30,0x21,
+0x94,0xa2,0x00,0x08,0x8c,0xc3,0x00,0x00,0x26,0x31,0x00,0x01,0x24,0x42,0x00,0x02,
+0x30,0x42,0x01,0xff,0x34,0x63,0x01,0x00,0x02,0x27,0x20,0x2a,0xa4,0xa2,0x00,0x08,
+0x14,0x80,0xff,0xf7,0xac,0xc3,0x00,0x00,0x84,0xa3,0x00,0x08,0x3c,0x02,0xb0,0x03,
+0x34,0x42,0x00,0x30,0xac,0x43,0x00,0x00,0x27,0x92,0xba,0x40,0x24,0x11,0x00,0x12,
+0x8e,0x44,0x00,0x00,0x26,0x31,0xff,0xff,0x90,0x82,0x00,0x10,0x00,0x00,0x00,0x00,
+0x10,0x40,0x00,0x03,0x26,0x52,0x00,0x04,0x0c,0x00,0x1d,0x55,0x00,0x00,0x00,0x00,
+0x06,0x21,0xff,0xf7,0x24,0x02,0xff,0xdf,0x02,0x02,0x80,0x24,0x3c,0x01,0xb0,0x03,
+0x0c,0x00,0x18,0x18,0xac,0x30,0x00,0x00,0x08,0x00,0x17,0x60,0x00,0x00,0x00,0x00,
+0x8f,0x85,0x96,0x20,0x08,0x00,0x17,0x76,0x00,0x00,0x00,0x00,0x24,0x02,0xff,0x95,
+0x3c,0x03,0xb0,0x03,0x02,0x02,0x80,0x24,0x34,0x63,0x00,0x30,0x3c,0x01,0xb0,0x03,
+0xac,0x30,0x00,0x00,0x0c,0x00,0x17,0xe1,0xac,0x60,0x00,0x00,0x08,0x00,0x17,0x60,
+0x00,0x00,0x00,0x00,0x3c,0x02,0xb0,0x03,0x34,0x42,0x00,0x50,0x08,0x00,0x17,0x60,
+0xac,0x46,0x00,0x00,0xaf,0xa7,0x00,0x0c,0xaf,0xa4,0x00,0x00,0xaf,0xa5,0x00,0x04,
+0xaf,0xa6,0x00,0x08,0x27,0xbd,0xfe,0xe8,0x00,0x80,0x28,0x21,0x27,0xa6,0x01,0x1c,
+0x27,0xa4,0x00,0x10,0xaf,0xbf,0x01,0x14,0x0c,0x00,0x29,0xa9,0xaf,0xb0,0x01,0x10,
+0x00,0x40,0x80,0x21,0x0c,0x00,0x17,0xb0,0x27,0xa4,0x00,0x10,0x02,0x00,0x10,0x21,
+0x8f,0xbf,0x01,0x14,0x8f,0xb0,0x01,0x10,0x03,0xe0,0x00,0x08,0x27,0xbd,0x01,0x18,
+0x93,0x83,0x87,0xec,0x27,0xbd,0xff,0xe8,0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x14,
+0x14,0x60,0x00,0x14,0x00,0x80,0x80,0x21,0x80,0x82,0x00,0x00,0x90,0x84,0x00,0x00,
+0x14,0x40,0x00,0x05,0x00,0x00,0x00,0x00,0x8f,0xbf,0x00,0x14,0x8f,0xb0,0x00,0x10,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x18,0x00,0x04,0x26,0x00,0x00,0x04,0x26,0x03,
+0x30,0x84,0xff,0xff,0x0c,0x00,0x17,0xd0,0x26,0x10,0x00,0x01,0x92,0x03,0x00,0x00,
+0x00,0x00,0x00,0x00,0x14,0x60,0xff,0xf8,0x00,0x60,0x20,0x21,0x08,0x00,0x17,0xba,
+0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x01,0x14,0x43,0xff,0xef,0x00,0x00,0x00,0x00,
+0x0c,0x00,0x04,0x52,0x00,0x00,0x00,0x00,0x08,0x00,0x17,0xba,0x00,0x00,0x00,0x00,
+0x30,0x84,0xff,0xff,0x48,0x84,0x00,0x00,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,
+0x27,0xbd,0xff,0xe8,0xaf,0xbf,0x00,0x10,0x0c,0x00,0x29,0x11,0x00,0x00,0x00,0x00,
+0x8f,0xbf,0x00,0x10,0x00,0x02,0x14,0x00,0x00,0x02,0x14,0x03,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x18,0x03,0xe0,0x00,0x08,0x24,0x02,0x00,0x01,0x03,0xe0,0x00,0x08,
+0x24,0x02,0x00,0x01,0x3c,0x0a,0x80,0x00,0x25,0x4a,0x5f,0x84,0x3c,0x0b,0xb0,0x03,
+0xad,0x6a,0x00,0x20,0x3c,0x08,0x80,0x01,0x25,0x08,0x00,0x00,0x3c,0x09,0x80,0x01,
+0x25,0x29,0x0b,0x2c,0x11,0x09,0x00,0x10,0x00,0x00,0x00,0x00,0x3c,0x0a,0x80,0x00,
+0x25,0x4a,0x5f,0xac,0x3c,0x0b,0xb0,0x03,0xad,0x6a,0x00,0x20,0x3c,0x08,0xb0,0x06,
+0x35,0x08,0x80,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x8d,0x09,0x00,0x00,
+0x00,0x00,0x00,0x00,0x31,0x29,0x00,0x01,0x00,0x00,0x00,0x00,0x24,0x01,0x00,0x01,
+0x15,0x21,0xff,0xf2,0x00,0x00,0x00,0x00,0x3c,0x0a,0x80,0x00,0x25,0x4a,0x5f,0xe8,
+0x3c,0x0b,0xb0,0x03,0xad,0x6a,0x00,0x20,0x3c,0x02,0xb0,0x03,0x8c,0x43,0x00,0x00,
+0x00,0x00,0x00,0x00,0x34,0x63,0x00,0x40,0x00,0x00,0x00,0x00,0xac,0x43,0x00,0x00,
+0x00,0x00,0x00,0x00,0x3c,0x0a,0x80,0x00,0x25,0x4a,0x60,0x14,0x3c,0x0b,0xb0,0x03,
+0xad,0x6a,0x00,0x20,0x3c,0x02,0x80,0x01,0x24,0x42,0x00,0x00,0x3c,0x03,0x80,0x01,
+0x24,0x63,0x0b,0x2c,0x3c,0x04,0xb0,0x00,0x8c,0x85,0x00,0x00,0x00,0x00,0x00,0x00,
+0xac,0x45,0x00,0x00,0x24,0x42,0x00,0x04,0x24,0x84,0x00,0x04,0x00,0x43,0x08,0x2a,
+0x14,0x20,0xff,0xf9,0x00,0x00,0x00,0x00,0x0c,0x00,0x18,0x18,0x00,0x00,0x00,0x00,
+0x3c,0x0a,0x80,0x00,0x25,0x4a,0x60,0x60,0x3c,0x0b,0xb0,0x03,0xad,0x6a,0x00,0x20,
+0x3c,0x02,0x80,0x01,0x24,0x42,0x0b,0x30,0x3c,0x03,0x80,0x01,0x24,0x63,0x42,0x50,
+0xac,0x40,0x00,0x00,0xac,0x40,0x00,0x04,0xac,0x40,0x00,0x08,0xac,0x40,0x00,0x0c,
+0x24,0x42,0x00,0x10,0x00,0x43,0x08,0x2a,0x14,0x20,0xff,0xf9,0x00,0x00,0x00,0x00,
+0x3c,0x0a,0x80,0x00,0x25,0x4a,0x60,0xa0,0x3c,0x0b,0xb0,0x03,0xad,0x6a,0x00,0x20,
+0x3c,0x1c,0x80,0x01,0x27,0x9c,0x7f,0xf0,0x27,0x9d,0x92,0x20,0x00,0x00,0x00,0x00,
+0x27,0x9d,0x96,0x08,0x3c,0x0a,0x80,0x00,0x25,0x4a,0x60,0xc4,0x3c,0x0b,0xb0,0x03,
+0xad,0x6a,0x00,0x20,0x40,0x80,0x68,0x00,0x40,0x08,0x60,0x00,0x00,0x00,0x00,0x00,
+0x35,0x08,0xff,0x01,0x40,0x88,0x60,0x00,0x00,0x00,0x00,0x00,0x0c,0x00,0x1a,0x4d,
+0x00,0x00,0x00,0x00,0x24,0x84,0xf8,0x00,0x30,0x87,0x00,0x03,0x00,0x04,0x30,0x40,
+0x00,0xc7,0x20,0x23,0x3c,0x02,0xb0,0x0a,0x27,0xbd,0xff,0xe0,0x24,0x03,0xff,0xff,
+0x00,0x82,0x20,0x21,0xaf,0xb1,0x00,0x14,0xac,0x83,0x10,0x00,0xaf,0xbf,0x00,0x18,
+0xaf,0xb0,0x00,0x10,0x00,0xa0,0x88,0x21,0x24,0x03,0x00,0x01,0x8c,0x82,0x10,0x00,
+0x00,0x00,0x00,0x00,0x14,0x43,0xff,0xfd,0x00,0xc7,0x10,0x23,0x3c,0x03,0xb0,0x0a,
+0x00,0x43,0x10,0x21,0x8c,0x50,0x00,0x00,0x0c,0x00,0x18,0x95,0x02,0x20,0x20,0x21,
+0x02,0x11,0x80,0x24,0x00,0x50,0x80,0x06,0x02,0x00,0x10,0x21,0x8f,0xbf,0x00,0x18,
+0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x20,0x27,0xbd,0xff,0xd8,
+0xaf,0xb2,0x00,0x18,0x00,0xa0,0x90,0x21,0x24,0x05,0xff,0xff,0xaf,0xb3,0x00,0x1c,
+0xaf,0xbf,0x00,0x20,0xaf,0xb1,0x00,0x14,0xaf,0xb0,0x00,0x10,0x00,0xc0,0x98,0x21,
+0x12,0x45,0x00,0x23,0x24,0x84,0xf8,0x00,0x30,0x83,0x00,0x03,0x00,0x04,0x10,0x40,
+0x00,0x40,0x88,0x21,0x00,0x60,0x20,0x21,0x00,0x43,0x10,0x23,0x3c,0x03,0xb0,0x0a,
+0x00,0x43,0x10,0x21,0xac,0x45,0x10,0x00,0x00,0x40,0x18,0x21,0x24,0x05,0x00,0x01,
+0x8c,0x62,0x10,0x00,0x00,0x00,0x00,0x00,0x14,0x45,0xff,0xfd,0x3c,0x02,0xb0,0x0a,
+0x02,0x24,0x88,0x23,0x02,0x22,0x88,0x21,0x8e,0x30,0x00,0x00,0x0c,0x00,0x18,0x95,
+0x02,0x40,0x20,0x21,0x00,0x12,0x18,0x27,0x02,0x03,0x80,0x24,0x00,0x53,0x10,0x04,
+0x02,0x02,0x80,0x25,0xae,0x30,0x00,0x00,0x24,0x03,0x00,0x01,0x8e,0x22,0x10,0x00,
+0x00,0x00,0x00,0x00,0x14,0x43,0xff,0xfd,0x00,0x00,0x00,0x00,0x8f,0xbf,0x00,0x20,
+0x7b,0xb2,0x00,0xfc,0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x28,
+0x30,0x82,0x00,0x03,0x00,0x04,0x18,0x40,0x00,0x62,0x18,0x23,0x3c,0x04,0xb0,0x0a,
+0x00,0x64,0x18,0x21,0xac,0x66,0x00,0x00,0x24,0x04,0x00,0x01,0x8c,0x62,0x10,0x00,
+0x00,0x00,0x00,0x00,0x14,0x44,0xff,0xfd,0x00,0x00,0x00,0x00,0x08,0x00,0x18,0x83,
+0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x21,0x00,0x64,0x10,0x06,0x30,0x42,0x00,0x01,
+0x14,0x40,0x00,0x05,0x00,0x00,0x00,0x00,0x24,0x63,0x00,0x01,0x2c,0x62,0x00,0x20,
+0x14,0x40,0xff,0xf9,0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,0x00,0x60,0x10,0x21,
+0x27,0xbd,0xff,0xe0,0x3c,0x03,0xb0,0x05,0xaf,0xb2,0x00,0x18,0xaf,0xb1,0x00,0x14,
+0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x1c,0x00,0x80,0x80,0x21,0x00,0xa0,0x88,0x21,
+0x00,0xc0,0x90,0x21,0x34,0x63,0x02,0x2e,0x90,0x62,0x00,0x00,0x00,0x00,0x00,0x00,
+0x30,0x42,0x00,0x01,0x14,0x40,0xff,0xfc,0x24,0x04,0x08,0x24,0x3c,0x05,0x00,0xc0,
+0x0c,0x00,0x18,0x5b,0x24,0x06,0x00,0x03,0x24,0x04,0x08,0x34,0x3c,0x05,0x00,0xc0,
+0x0c,0x00,0x18,0x5b,0x24,0x06,0x00,0x03,0x82,0x02,0x00,0x13,0x00,0x11,0x24,0x00,
+0x3c,0x03,0xc0,0x00,0x00,0x02,0x12,0x00,0x00,0x44,0x10,0x21,0x3c,0x04,0xb0,0x05,
+0x24,0x42,0x00,0x09,0x34,0x84,0x04,0x20,0x34,0x63,0x04,0x00,0x3c,0x05,0xb0,0x05,
+0x3c,0x06,0xb0,0x05,0xac,0x82,0x00,0x00,0x24,0x07,0x00,0x01,0x02,0x43,0x18,0x21,
+0x34,0xa5,0x04,0x24,0x34,0xc6,0x02,0x28,0x24,0x02,0x00,0x20,0xac,0xa3,0x00,0x00,
+0xae,0x07,0x00,0x3c,0xa0,0xc2,0x00,0x00,0xa2,0x07,0x00,0x11,0x3c,0x02,0xb0,0x05,
+0x34,0x42,0x02,0x2e,0x90,0x43,0x00,0x00,0x24,0x04,0x08,0x24,0x3c,0x05,0x00,0xc0,
+0x0c,0x00,0x18,0x5b,0x24,0x06,0x00,0x01,0x24,0x04,0x08,0x34,0x3c,0x05,0x00,0xc0,
+0x0c,0x00,0x18,0x5b,0x24,0x06,0x00,0x01,0x8f,0xbf,0x00,0x1c,0x8f,0xb2,0x00,0x18,
+0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x20,0x24,0x02,0x00,0x06,
+0xac,0x82,0x00,0x0c,0xa0,0x80,0x00,0x50,0xac,0x80,0x00,0x00,0xac,0x80,0x00,0x04,
+0xac,0x80,0x00,0x08,0xac,0x80,0x00,0x14,0xac,0x80,0x00,0x18,0xac,0x80,0x00,0x1c,
+0xa4,0x80,0x00,0x20,0xac,0x80,0x00,0x24,0xac,0x80,0x00,0x28,0xac,0x80,0x00,0x2c,
+0xa0,0x80,0x00,0x30,0xa0,0x80,0x00,0x31,0xac,0x80,0x00,0x34,0xac,0x80,0x00,0x38,
+0xa0,0x80,0x00,0x3c,0xac,0x82,0x00,0x10,0xa0,0x80,0x00,0x44,0xac,0x80,0x00,0x48,
+0x03,0xe0,0x00,0x08,0xac,0x80,0x00,0x4c,0x3c,0x04,0xb0,0x06,0x34,0x84,0x80,0x00,
+0x8c,0x83,0x00,0x00,0x3c,0x02,0x12,0x00,0x3c,0x05,0xb0,0x03,0x00,0x62,0x18,0x25,
+0x34,0xa5,0x00,0x8b,0x24,0x02,0xff,0x80,0xac,0x83,0x00,0x00,0x03,0xe0,0x00,0x08,
+0xa0,0xa2,0x00,0x00,0x3c,0x04,0xb0,0x03,0x34,0x84,0x00,0x0b,0x24,0x02,0x00,0x22,
+0x3c,0x05,0xb0,0x01,0x3c,0x06,0x45,0x67,0x3c,0x0a,0xb0,0x09,0xa0,0x82,0x00,0x00,
+0x34,0xa5,0x00,0x04,0x34,0xc6,0x89,0xaa,0x35,0x4a,0x00,0x04,0x24,0x02,0x01,0x23,
+0x3c,0x0b,0xb0,0x09,0x3c,0x07,0x01,0x23,0x3c,0x0c,0xb0,0x09,0x3c,0x01,0xb0,0x01,
+0xac,0x20,0x00,0x00,0x27,0xbd,0xff,0xe0,0xac,0xa0,0x00,0x00,0x35,0x6b,0x00,0x08,
+0x3c,0x01,0xb0,0x09,0xac,0x26,0x00,0x00,0x34,0xe7,0x45,0x66,0xa5,0x42,0x00,0x00,
+0x35,0x8c,0x00,0x0c,0x24,0x02,0xcd,0xef,0x3c,0x0d,0xb0,0x09,0x3c,0x08,0xcd,0xef,
+0x3c,0x0e,0xb0,0x09,0xad,0x67,0x00,0x00,0xaf,0xb7,0x00,0x1c,0xa5,0x82,0x00,0x00,
+0xaf,0xb6,0x00,0x18,0xaf,0xb5,0x00,0x14,0xaf,0xb4,0x00,0x10,0xaf,0xb3,0x00,0x0c,
+0xaf,0xb2,0x00,0x08,0xaf,0xb1,0x00,0x04,0xaf,0xb0,0x00,0x00,0x35,0xad,0x00,0x10,
+0x35,0x08,0x01,0x22,0x35,0xce,0x00,0x14,0x24,0x02,0x89,0xab,0x3c,0x0f,0xb0,0x09,
+0x3c,0x09,0x89,0xab,0x3c,0x10,0xb0,0x09,0x3c,0x11,0xb0,0x09,0x3c,0x12,0xb0,0x09,
+0x3c,0x13,0xb0,0x09,0x3c,0x14,0xb0,0x09,0x3c,0x15,0xb0,0x09,0x3c,0x16,0xb0,0x09,
+0x3c,0x17,0xb0,0x09,0xad,0xa8,0x00,0x00,0x24,0x03,0xff,0xff,0xa5,0xc2,0x00,0x00,
+0x35,0xef,0x00,0x18,0x35,0x29,0xcd,0xee,0x36,0x10,0x00,0x1c,0x36,0x31,0x00,0x20,
+0x36,0x52,0x00,0x24,0x36,0x73,0x00,0x28,0x36,0x94,0x00,0x2c,0x36,0xb5,0x00,0x30,
+0x36,0xd6,0x00,0x34,0x36,0xf7,0x00,0x38,0x24,0x02,0x45,0x67,0xad,0xe9,0x00,0x00,
+0xa6,0x02,0x00,0x00,0xae,0x23,0x00,0x00,0x8f,0xb0,0x00,0x00,0xa6,0x43,0x00,0x00,
+0x8f,0xb1,0x00,0x04,0xae,0x63,0x00,0x00,0x8f,0xb2,0x00,0x08,0xa6,0x83,0x00,0x00,
+0x8f,0xb3,0x00,0x0c,0xae,0xa3,0x00,0x00,0x8f,0xb4,0x00,0x10,0xa6,0xc3,0x00,0x00,
+0x8f,0xb5,0x00,0x14,0xae,0xe3,0x00,0x00,0x7b,0xb6,0x00,0xfc,0x3c,0x18,0xb0,0x09,
+0x37,0x18,0x00,0x3c,0xa7,0x03,0x00,0x00,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x20,
+0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,0x34,0x63,0x00,0x20,0x24,0x42,0x65,0x50,
+0xac,0x62,0x00,0x00,0x8c,0x83,0x00,0x34,0x34,0x02,0xff,0xff,0x00,0x43,0x10,0x2a,
+0x14,0x40,0x00,0xed,0x00,0x80,0x28,0x21,0x8c,0x84,0x00,0x08,0x24,0x02,0x00,0x03,
+0x10,0x82,0x00,0xe0,0x00,0x00,0x00,0x00,0x8c,0xa2,0x00,0x2c,0x00,0x00,0x00,0x00,
+0x14,0x40,0x00,0x38,0x24,0x02,0x00,0x06,0x3c,0x03,0xb0,0x05,0x34,0x63,0x04,0x50,
+0x90,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0xff,0x14,0x40,0x00,0xc6,
+0xac,0xa2,0x00,0x2c,0x24,0x02,0x00,0x01,0x10,0x82,0x00,0xc5,0x00,0x00,0x00,0x00,
+0x24,0x02,0x00,0x02,0x10,0x82,0x00,0xb3,0x00,0x00,0x00,0x00,0x8c,0xa6,0x00,0x04,
+0x24,0x02,0x00,0x02,0x10,0xc2,0x00,0xa9,0x00,0x00,0x00,0x00,0x3c,0x02,0xb0,0x03,
+0x34,0x42,0x00,0xd0,0x8c,0x43,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x61,0x00,0x16,
+0x3c,0x03,0xb0,0x05,0x34,0x63,0x02,0x2e,0x90,0x62,0x00,0x00,0x00,0x00,0x00,0x00,
+0x30,0x42,0x00,0x01,0x14,0x40,0x00,0x10,0x3c,0x02,0xb0,0x05,0x34,0x42,0x02,0x42,
+0x90,0x43,0x00,0x00,0x00,0x00,0x00,0x00,0x14,0x60,0x00,0x0b,0x00,0x00,0x00,0x00,
+0x80,0xa2,0x00,0x50,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x07,0x00,0x00,0x00,0x00,
+0x14,0x80,0x00,0x05,0x24,0x02,0x00,0x0e,0x24,0x03,0x00,0x01,0xac,0xa2,0x00,0x00,
+0x03,0xe0,0x00,0x08,0xa0,0xa3,0x00,0x50,0x80,0xa2,0x00,0x31,0x00,0x00,0x00,0x00,
+0x10,0x40,0x00,0x0a,0x3c,0x02,0xb0,0x06,0x34,0x42,0x80,0x18,0x8c,0x43,0x00,0x00,
+0x3c,0x04,0xf0,0x00,0x3c,0x02,0x80,0x00,0x00,0x64,0x18,0x24,0x10,0x62,0x00,0x03,
+0x24,0x02,0x00,0x09,0x03,0xe0,0x00,0x08,0xac,0xa2,0x00,0x00,0x8c,0xa2,0x00,0x40,
+0x00,0x00,0x00,0x00,0x8c,0x43,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x60,0x00,0x09,
+0x3c,0x03,0xb0,0x03,0x3c,0x02,0xb0,0x05,0x34,0x42,0x02,0x2c,0x8c,0x43,0x00,0x00,
+0x3c,0x04,0x00,0x02,0x00,0x64,0x18,0x24,0x14,0x60,0xff,0xf2,0x24,0x02,0x00,0x10,
+0x3c,0x03,0xb0,0x03,0x34,0x63,0x02,0x01,0x90,0x62,0x00,0x00,0x00,0x00,0x00,0x00,
+0x30,0x42,0x00,0x80,0x10,0x40,0x00,0x0e,0x00,0x00,0x00,0x00,0x8c,0xa3,0x00,0x0c,
+0x00,0x00,0x00,0x00,0xac,0xa3,0x00,0x10,0x3c,0x02,0xb0,0x03,0x90,0x42,0x02,0x01,
+0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x0f,0xac,0xa2,0x00,0x0c,0x90,0xa3,0x00,0x0f,
+0x24,0x02,0x00,0x0d,0x3c,0x01,0xb0,0x03,0x08,0x00,0x19,0x9d,0xa0,0x23,0x02,0x01,
+0x3c,0x02,0xb0,0x09,0x34,0x42,0x01,0x80,0x90,0x44,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x04,0x1e,0x00,0x00,0x03,0x1e,0x03,0x10,0x60,0x00,0x15,0xa0,0xa4,0x00,0x44,
+0x24,0x02,0x00,0x01,0x10,0x62,0x00,0x0b,0x24,0x02,0x00,0x02,0x10,0x62,0x00,0x03,
+0x24,0x03,0x00,0x0d,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x8c,0xa2,0x00,0x0c,
+0xac,0xa3,0x00,0x00,0x24,0x03,0x00,0x04,0xac,0xa2,0x00,0x10,0x03,0xe0,0x00,0x08,
+0xac,0xa3,0x00,0x0c,0x24,0x02,0x00,0x0d,0xac,0xa2,0x00,0x00,0x24,0x03,0x00,0x04,
+0x24,0x02,0x00,0x06,0xac,0xa3,0x00,0x10,0x03,0xe0,0x00,0x08,0xac,0xa2,0x00,0x0c,
+0x8c,0xa2,0x00,0x14,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x09,0x24,0x02,0x00,0x01,
+0x3c,0x03,0xb0,0x09,0x34,0x63,0x01,0x60,0x90,0x62,0x00,0x00,0x00,0x00,0x00,0x00,
+0x30,0x42,0x00,0xff,0x10,0x40,0x00,0x05,0xac,0xa2,0x00,0x14,0x24,0x02,0x00,0x01,
+0xac,0xa2,0x00,0x00,0x03,0xe0,0x00,0x08,0xac,0xa0,0x00,0x14,0x8c,0xa3,0x00,0x38,
+0x24,0x04,0x00,0x01,0x10,0x64,0x00,0x2d,0x24,0x02,0x00,0x02,0x10,0x60,0x00,0x19,
+0x00,0x00,0x00,0x00,0x10,0x62,0x00,0x10,0x24,0x02,0x00,0x04,0x10,0x62,0x00,0x04,
+0x00,0x00,0x00,0x00,0xac,0xa0,0x00,0x38,0x03,0xe0,0x00,0x08,0xac,0xa0,0x00,0x00,
+0x10,0xc4,0x00,0x07,0x24,0x02,0x00,0x03,0x80,0xa2,0x00,0x30,0x00,0x00,0x00,0x00,
+0x00,0x02,0x18,0x0b,0xac,0xa3,0x00,0x00,0x03,0xe0,0x00,0x08,0xac,0xa0,0x00,0x38,
+0x08,0x00,0x19,0xfe,0xac,0xa2,0x00,0x00,0x10,0xc4,0x00,0x02,0x24,0x02,0x00,0x03,
+0x24,0x02,0x00,0x0c,0xac,0xa2,0x00,0x00,0x24,0x02,0x00,0x04,0x03,0xe0,0x00,0x08,
+0xac,0xa2,0x00,0x38,0x10,0xc4,0x00,0x0e,0x3c,0x03,0xb0,0x06,0x34,0x63,0x80,0x24,
+0x8c,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0xff,0x10,0x40,0x00,0x06,
+0xac,0xa2,0x00,0x18,0x24,0x02,0x00,0x02,0xac,0xa2,0x00,0x00,0xac,0xa0,0x00,0x18,
+0x08,0x00,0x1a,0x07,0x24,0x02,0x00,0x01,0x08,0x00,0x1a,0x14,0xac,0xa0,0x00,0x00,
+0x24,0x02,0x00,0x03,0x08,0x00,0x1a,0x14,0xac,0xa2,0x00,0x00,0x24,0x03,0x00,0x0b,
+0xac,0xa2,0x00,0x38,0x03,0xe0,0x00,0x08,0xac,0xa3,0x00,0x00,0x80,0xa2,0x00,0x30,
+0x00,0x00,0x00,0x00,0x14,0x40,0xff,0x55,0x24,0x02,0x00,0x04,0x08,0x00,0x19,0x9d,
+0x00,0x00,0x00,0x00,0x84,0xa2,0x00,0x20,0x00,0x00,0x00,0x00,0x10,0x40,0xff,0x75,
+0x24,0x02,0x00,0x06,0x3c,0x02,0xb0,0x05,0x34,0x42,0x02,0x2e,0x90,0x43,0x00,0x00,
+0x00,0x00,0x00,0x00,0x30,0x63,0x00,0x01,0x30,0x63,0x00,0xff,0x00,0x60,0x10,0x21,
+0x14,0x40,0xff,0x42,0xa4,0xa3,0x00,0x20,0x08,0x00,0x19,0x9d,0x24,0x02,0x00,0x06,
+0x8c,0xa2,0x00,0x1c,0x00,0x00,0x00,0x00,0x14,0x40,0xff,0x66,0x24,0x02,0x00,0x05,
+0x3c,0x03,0xb0,0x05,0x34,0x63,0x02,0x2c,0x8c,0x62,0x00,0x00,0x00,0x00,0x00,0x00,
+0x30,0x42,0x00,0xff,0x10,0x40,0xff,0x32,0xac,0xa2,0x00,0x1c,0x08,0x00,0x19,0x9d,
+0x24,0x02,0x00,0x05,0x3c,0x02,0xb0,0x05,0x8c,0x42,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x02,0x17,0x42,0x30,0x42,0x00,0x01,0x14,0x40,0xff,0x56,0x24,0x02,0x00,0x06,
+0x08,0x00,0x19,0x62,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x0a,0x03,0xe0,0x00,0x08,
+0xac,0x82,0x00,0x00,0x27,0xbd,0xff,0xd8,0xaf,0xb1,0x00,0x14,0xaf,0xb0,0x00,0x10,
+0x27,0x91,0x90,0xf8,0x27,0x90,0x8e,0x38,0xaf,0xbf,0x00,0x20,0xaf,0xb3,0x00,0x1c,
+0x0c,0x00,0x28,0x9e,0xaf,0xb2,0x00,0x18,0x0c,0x00,0x06,0x90,0x00,0x00,0x00,0x00,
+0xaf,0x91,0x92,0x10,0xaf,0x90,0x96,0x20,0x48,0x02,0x00,0x00,0x0c,0x00,0x18,0xf2,
+0x00,0x00,0x00,0x00,0x0c,0x00,0x1c,0x9b,0x02,0x00,0x20,0x21,0x3c,0x02,0xb0,0x03,
+0x34,0x42,0x00,0x3a,0x94,0x43,0x00,0x00,0x00,0x00,0x00,0x00,0xa3,0x83,0x96,0x24,
+0x0c,0x00,0x00,0x34,0x00,0x00,0x00,0x00,0x0c,0x00,0x18,0xfd,0x00,0x00,0x00,0x00,
+0x27,0x84,0x8c,0x78,0x0c,0x00,0x2c,0x78,0x00,0x00,0x00,0x00,0x0c,0x00,0x25,0x71,
+0x00,0x00,0x00,0x00,0x0c,0x00,0x0c,0x0d,0x02,0x20,0x20,0x21,0x0c,0x00,0x01,0x39,
+0x00,0x00,0x00,0x00,0x27,0x84,0x8c,0x20,0x0c,0x00,0x18,0xdb,0x00,0x00,0x00,0x00,
+0x27,0x82,0x91,0x2c,0xaf,0x82,0x8c,0x60,0x0c,0x00,0x00,0x5f,0x00,0x00,0x00,0x00,
+0x3c,0x03,0xb0,0x03,0x34,0x63,0x01,0x08,0x3c,0x04,0xb0,0x09,0x3c,0x05,0xb0,0x09,
+0x8c,0x66,0x00,0x00,0x34,0x84,0x01,0x68,0x24,0x02,0xd1,0x10,0x34,0xa5,0x01,0x40,
+0x24,0x03,0x00,0x0a,0xa4,0x82,0x00,0x00,0xa4,0xa3,0x00,0x00,0x3c,0x04,0xb0,0x03,
+0x8c,0x82,0x00,0x00,0xaf,0x86,0x8c,0x18,0x34,0x42,0x00,0x20,0xac,0x82,0x00,0x00,
+0x0c,0x00,0x06,0xa1,0x00,0x00,0x00,0x00,0x3c,0x04,0xb0,0x05,0x0c,0x00,0x28,0xb6,
+0x34,0x84,0x00,0x04,0x8f,0x83,0x8c,0x20,0x00,0x00,0x00,0x00,0x2c,0x62,0x00,0x11,
+0x10,0x40,0xff,0xf7,0x00,0x03,0x10,0x80,0x3c,0x03,0x80,0x01,0x24,0x63,0x09,0x08,
+0x00,0x43,0x10,0x21,0x8c,0x44,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x08,
+0x00,0x00,0x00,0x00,0x27,0x84,0x8c,0x20,0x0c,0x00,0x19,0x54,0x00,0x00,0x00,0x00,
+0x8f,0x82,0x8c,0x54,0x00,0x00,0x00,0x00,0x24,0x42,0x00,0x01,0xaf,0x82,0x8c,0x54,
+0x08,0x00,0x1a,0x88,0x00,0x00,0x00,0x00,0x27,0x84,0x8c,0x78,0x0c,0x00,0x2d,0xe5,
+0x00,0x00,0x00,0x00,0xa3,0x82,0x8c,0x51,0xaf,0x80,0x8c,0x20,0x08,0x00,0x1a,0x9c,
+0x00,0x00,0x00,0x00,0x27,0x84,0x8e,0x38,0x0c,0x00,0x1d,0xe0,0x00,0x00,0x00,0x00,
+0x30,0x42,0x00,0xff,0x14,0x40,0x00,0x05,0x3c,0x03,0xb0,0x05,0xaf,0x80,0x8c,0x20,
+0xaf,0x80,0x8c,0x24,0x08,0x00,0x1a,0x9c,0x00,0x00,0x00,0x00,0x34,0x63,0x04,0x50,
+0x90,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0xff,0xaf,0x82,0x8c,0x4c,
+0x14,0x40,0x00,0x1e,0x24,0x02,0x00,0x01,0x8f,0x84,0x8c,0x28,0x00,0x00,0x00,0x00,
+0x10,0x82,0x00,0x1d,0x3c,0x03,0xb0,0x09,0x34,0x63,0x01,0x60,0x90,0x62,0x00,0x00,
+0x00,0x00,0x00,0x00,0x30,0x42,0x00,0xff,0xaf,0x82,0x8c,0x34,0x14,0x40,0x00,0x13,
+0x24,0x02,0x00,0x01,0x24,0x02,0x00,0x02,0x10,0x82,0x00,0x07,0x3c,0x02,0xb0,0x05,
+0x24,0x02,0x00,0x01,0x24,0x03,0x00,0x03,0xaf,0x82,0x8c,0x24,0xaf,0x83,0x8c,0x20,
+0x08,0x00,0x1a,0x9c,0x00,0x00,0x00,0x00,0x34,0x42,0x02,0x2e,0x90,0x43,0x00,0x00,
+0x00,0x00,0x00,0x00,0x30,0x63,0x00,0x01,0x30,0x63,0x00,0xff,0x00,0x60,0x10,0x21,
+0xa7,0x83,0x8c,0x40,0x14,0x40,0xff,0xf3,0x24,0x02,0x00,0x01,0xaf,0x82,0x8c,0x24,
+0x08,0x00,0x1a,0xa6,0x00,0x00,0x00,0x00,0x3c,0x03,0xb0,0x05,0x34,0x63,0x02,0x2c,
+0x8c,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0xff,0xaf,0x82,0x8c,0x3c,
+0x14,0x40,0xff,0xf6,0x24,0x02,0x00,0x01,0x08,0x00,0x1a,0xbe,0x3c,0x03,0xb0,0x09,
+0x27,0x84,0x8e,0x38,0x0c,0x00,0x1f,0x44,0x00,0x00,0x00,0x00,0x83,0x82,0x8c,0x50,
+0x00,0x00,0x00,0x00,0x14,0x40,0xff,0xed,0x24,0x02,0x00,0x02,0x3c,0x03,0xb0,0x05,
+0x34,0x63,0x04,0x50,0x90,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0xff,
+0xaf,0x82,0x8c,0x4c,0x14,0x40,0xff,0xe5,0x24,0x02,0x00,0x02,0x8f,0x84,0x8c,0x28,
+0x24,0x02,0x00,0x01,0x10,0x82,0x00,0x12,0x24,0x02,0x00,0x02,0x10,0x82,0x00,0x05,
+0x3c,0x02,0xb0,0x05,0x24,0x02,0x00,0x02,0xaf,0x82,0x8c,0x24,0x08,0x00,0x1a,0xcb,
+0x24,0x03,0x00,0x04,0x34,0x42,0x02,0x2e,0x90,0x43,0x00,0x00,0x00,0x00,0x00,0x00,
+0x30,0x63,0x00,0x01,0x30,0x63,0x00,0xff,0x00,0x60,0x10,0x21,0xa7,0x83,0x8c,0x40,
+0x14,0x40,0xff,0xf4,0x00,0x00,0x00,0x00,0x08,0x00,0x1a,0xd7,0x24,0x02,0x00,0x02,
+0x3c,0x03,0xb0,0x05,0x34,0x63,0x02,0x2c,0x8c,0x62,0x00,0x00,0x00,0x00,0x00,0x00,
+0x30,0x42,0x00,0xff,0xaf,0x82,0x8c,0x3c,0x14,0x40,0xff,0xf7,0x00,0x00,0x00,0x00,
+0x08,0x00,0x1a,0xf7,0x24,0x02,0x00,0x02,0x27,0x84,0x90,0xf8,0x0c,0x00,0x10,0x1b,
+0x00,0x00,0x00,0x00,0x8f,0x83,0x8c,0x24,0xaf,0x82,0x8c,0x3c,0x38,0x64,0x00,0x02,
+0x00,0x04,0x18,0x0a,0xaf,0x83,0x8c,0x24,0x14,0x40,0x00,0x08,0x24,0x02,0x00,0x05,
+0x8f,0x82,0x91,0x38,0xaf,0x80,0x8c,0x20,0x10,0x40,0xff,0x7d,0x24,0x04,0x00,0x01,
+0xaf,0x84,0x8c,0x28,0x08,0x00,0x1a,0x9c,0x00,0x00,0x00,0x00,0xaf,0x82,0x8c,0x20,
+0x08,0x00,0x1a,0x9c,0x00,0x00,0x00,0x00,0x83,0x82,0x8c,0x70,0x00,0x00,0x00,0x00,
+0x10,0x40,0x00,0x02,0x24,0x02,0x00,0x20,0xaf,0x82,0x8c,0x3c,0x8f,0x85,0x8c,0x3c,
+0x27,0x84,0x90,0xf8,0x0c,0x00,0x12,0x01,0x00,0x00,0x00,0x00,0x00,0x02,0x1e,0x00,
+0xa3,0x82,0x8c,0x50,0xaf,0x80,0x8c,0x3c,0x10,0x60,0xff,0x73,0x3c,0x02,0xb0,0x05,
+0x34,0x42,0x02,0x2e,0x90,0x43,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x63,0x00,0x01,
+0x30,0x63,0x00,0xff,0x00,0x60,0x10,0x21,0xa7,0x83,0x8c,0x40,0x10,0x40,0xff,0xe7,
+0x24,0x02,0x00,0x06,0x24,0x04,0x00,0x02,0xaf,0x84,0x8c,0x28,0x08,0x00,0x1a,0xa6,
+0x00,0x00,0x00,0x00,0x27,0x84,0x8c,0x20,0x27,0x85,0x90,0xf8,0x0c,0x00,0x12,0xc7,
+0x00,0x00,0x00,0x00,0x8f,0x82,0x8c,0x44,0xaf,0x80,0x8c,0x4c,0x14,0x40,0x00,0x18,
+0x00,0x40,0x18,0x21,0x8f,0x82,0x8c,0x48,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x14,
+0x24,0x02,0x00,0x02,0x8f,0x83,0x8c,0x28,0x00,0x00,0x00,0x00,0x10,0x62,0x00,0x09,
+0x24,0x02,0x00,0x01,0x8f,0x83,0x8c,0x24,0x00,0x00,0x00,0x00,0x10,0x62,0x00,0x02,
+0x24,0x02,0x00,0x03,0x24,0x02,0x00,0x06,0xaf,0x82,0x8c,0x20,0x08,0x00,0x1b,0x20,
+0x24,0x04,0x00,0x03,0x3c,0x02,0x40,0x00,0x34,0x42,0x00,0x14,0x3c,0x01,0xb0,0x05,
+0xac,0x22,0x00,0x00,0xaf,0x80,0x8c,0x20,0x08,0x00,0x1b,0x20,0x24,0x04,0x00,0x03,
+0x10,0x60,0x00,0x10,0x00,0x00,0x00,0x00,0x27,0x84,0x8c,0x20,0x27,0x85,0x90,0xf8,
+0x0c,0x00,0x12,0xeb,0x00,0x00,0x00,0x00,0x8f,0x83,0x8c,0x24,0x24,0x02,0x00,0x01,
+0xa3,0x80,0x8c,0x50,0xaf,0x80,0x8c,0x28,0x10,0x62,0x00,0x02,0x24,0x02,0x00,0x03,
+0x24,0x02,0x00,0x04,0xaf,0x82,0x8c,0x20,0xaf,0x80,0x8c,0x44,0x08,0x00,0x1a,0x9c,
+0x00,0x00,0x00,0x00,0x83,0x82,0x8c,0x70,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x04,
+0x00,0x00,0x00,0x00,0x27,0x84,0x90,0xf8,0x0c,0x00,0x15,0x32,0x00,0x00,0x00,0x00,
+0x8f,0x82,0x8c,0x24,0xa3,0x80,0x8c,0x50,0xaf,0x80,0x8c,0x20,0xaf,0x80,0x8c,0x28,
+0x14,0x40,0x00,0x02,0x24,0x02,0x00,0x02,0xaf,0x82,0x8c,0x24,0xaf,0x80,0x8c,0x48,
+0x08,0x00,0x1a,0x9c,0x00,0x00,0x00,0x00,0x27,0x84,0x8c,0x20,0x27,0x85,0x90,0xf8,
+0x0c,0x00,0x12,0xeb,0x00,0x00,0x00,0x00,0x8f,0x82,0x8c,0x24,0xa3,0x80,0x8c,0x50,
+0xaf,0x80,0x8c,0x20,0xaf,0x80,0x8c,0x28,0x14,0x40,0xff,0x11,0x24,0x02,0x00,0x02,
+0xaf,0x82,0x8c,0x24,0x08,0x00,0x1a,0x9c,0x00,0x00,0x00,0x00,0x27,0x84,0x90,0xf8,
+0x0c,0x00,0x15,0x32,0x00,0x00,0x00,0x00,0x08,0x00,0x1b,0x86,0x00,0x00,0x00,0x00,
+0x27,0x84,0x8c,0x78,0x0c,0x00,0x2e,0x70,0x00,0x00,0x00,0x00,0x08,0x00,0x1a,0xa5,
+0x00,0x00,0x00,0x00,0x0c,0x00,0x27,0x0a,0x00,0x00,0x00,0x00,0x93,0x82,0x92,0x14,
+0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x2b,0x3c,0x02,0xb0,0x03,0x34,0x42,0x01,0x08,
+0x8c,0x44,0x00,0x00,0x8f,0x83,0xc2,0x50,0x8f,0x82,0xc2,0x54,0x00,0x83,0x18,0x23,
+0x00,0x43,0x10,0x2b,0x10,0x40,0x00,0x23,0x3c,0x02,0xb0,0x03,0x24,0x04,0x05,0xa0,
+0x34,0x42,0x01,0x18,0x8c,0x42,0x00,0x00,0x0c,0x00,0x0b,0xfa,0x00,0x00,0x00,0x00,
+0x24,0x04,0x05,0xa4,0x0c,0x00,0x0b,0xfa,0x00,0x02,0x84,0x02,0x30,0x51,0xff,0xff,
+0x24,0x04,0x05,0xa8,0x00,0x02,0x94,0x02,0x0c,0x00,0x0b,0xfa,0x3a,0x10,0xff,0xff,
+0x3a,0x31,0xff,0xff,0x30,0x42,0xff,0xff,0x2e,0x10,0x00,0x01,0x2e,0x31,0x00,0x01,
+0x3a,0x52,0xff,0xff,0x02,0x11,0x80,0x25,0x2e,0x52,0x00,0x01,0x38,0x42,0xff,0xff,
+0x02,0x12,0x80,0x25,0x2c,0x42,0x00,0x01,0x02,0x02,0x80,0x25,0x16,0x00,0x00,0x02,
+0x24,0x04,0x00,0x02,0x00,0x00,0x20,0x21,0x0c,0x00,0x0a,0x9c,0x00,0x00,0x00,0x00,
+0x3c,0x02,0xb0,0x03,0x34,0x42,0x01,0x08,0x8c,0x43,0x00,0x00,0x00,0x00,0x00,0x00,
+0xaf,0x83,0xc2,0x50,0x0c,0x00,0x01,0xcb,0x00,0x00,0x00,0x00,0xaf,0x80,0x8c,0x20,
+0xaf,0x80,0x8c,0x54,0x08,0x00,0x1a,0x88,0x00,0x00,0x00,0x00,0x27,0x90,0xba,0x40,
+0x24,0x11,0x00,0x12,0x8e,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x90,0x82,0x00,0x10,
+0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x03,0x00,0x00,0x00,0x00,0x0c,0x00,0x1d,0x55,
+0x00,0x00,0x00,0x00,0x26,0x31,0xff,0xff,0x06,0x21,0xff,0xf6,0x26,0x10,0x00,0x04,
+0x08,0x00,0x1a,0xa6,0x00,0x00,0x00,0x00,0x3c,0x02,0xb0,0x03,0x34,0x42,0x01,0x08,
+0x8c,0x44,0x00,0x00,0x8f,0x82,0x8c,0x18,0x00,0x04,0x19,0xc2,0x00,0x02,0x11,0xc2,
+0x10,0x62,0xfe,0xc1,0x3c,0x02,0xb0,0x03,0x34,0x42,0x01,0x02,0x90,0x43,0x00,0x00,
+0x3c,0x12,0xb0,0x05,0xaf,0x84,0x8c,0x18,0x30,0x63,0x00,0xff,0x00,0x03,0x11,0x40,
+0x00,0x43,0x10,0x23,0x00,0x02,0x10,0x80,0x00,0x43,0x10,0x21,0x00,0x02,0x99,0x00,
+0x00,0x00,0x88,0x21,0x36,0x52,0x02,0x2c,0x27,0x90,0xba,0x40,0x8e,0x04,0x00,0x00,
+0x00,0x00,0x00,0x00,0x90,0x83,0x00,0x16,0x00,0x00,0x00,0x00,0x30,0x62,0x00,0x03,
+0x10,0x40,0x00,0x06,0x30,0x62,0x00,0x1c,0x14,0x40,0x00,0x04,0x00,0x00,0x00,0x00,
+0x8f,0x85,0x8c,0x18,0x0c,0x00,0x22,0xc6,0x02,0x60,0x30,0x21,0x8e,0x42,0x00,0x00,
+0x00,0x00,0x00,0x00,0x30,0x42,0x00,0xff,0x14,0x40,0xfe,0xa3,0x00,0x00,0x00,0x00,
+0x26,0x31,0x00,0x01,0x2a,0x22,0x00,0x13,0x14,0x40,0xff,0xec,0x26,0x10,0x00,0x04,
+0x08,0x00,0x1a,0xa6,0x00,0x00,0x00,0x00,0x8f,0x84,0x8c,0x2c,0x27,0x85,0x90,0xf8,
+0x0c,0x00,0x1c,0x2e,0x00,0x00,0x00,0x00,0x8f,0x83,0x8c,0x2c,0x24,0x02,0x00,0x04,
+0x14,0x62,0xfe,0x95,0x24,0x02,0x00,0x05,0x08,0x00,0x1b,0x23,0x00,0x00,0x00,0x00,
+0x27,0x84,0x90,0xf8,0x0c,0x00,0x27,0x2e,0x00,0x00,0x00,0x00,0x08,0x00,0x1a,0xcb,
+0x24,0x03,0x00,0x05,0x8f,0x82,0x91,0x2c,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x0d,
+0x00,0x00,0x00,0x00,0x8f,0x84,0xba,0x80,0xaf,0x80,0x91,0x2c,0x94,0x85,0x00,0x14,
+0x0c,0x00,0x1f,0xdd,0x00,0x00,0x00,0x00,0x93,0x82,0x91,0x51,0x00,0x00,0x00,0x00,
+0x30,0x42,0x00,0x02,0x10,0x40,0x00,0x03,0x00,0x00,0x00,0x00,0x0c,0x00,0x01,0x60,
+0x00,0x00,0x20,0x21,0x8f,0x84,0xba,0x80,0x0c,0x00,0x1d,0x55,0x00,0x00,0x00,0x00,
+0x08,0x00,0x1a,0xa6,0x00,0x00,0x00,0x00,0x27,0xbd,0xff,0xe0,0x3c,0x06,0xb0,0x03,
+0xaf,0xb1,0x00,0x14,0xaf,0xb0,0x00,0x10,0x34,0xc6,0x00,0x5f,0xaf,0xbf,0x00,0x18,
+0x90,0xc3,0x00,0x00,0x3c,0x07,0xb0,0x03,0x34,0xe7,0x00,0x5d,0x34,0x63,0x00,0x01,
+0x3c,0x09,0xb0,0x03,0x24,0x02,0x00,0x01,0xa0,0xc3,0x00,0x00,0x00,0x80,0x80,0x21,
+0xa0,0xe2,0x00,0x00,0x00,0xa0,0x88,0x21,0x35,0x29,0x00,0x5e,0x00,0xe0,0x40,0x21,
+0x24,0x04,0x00,0x01,0x91,0x22,0x00,0x00,0x91,0x03,0x00,0x00,0x30,0x42,0x00,0x01,
+0x14,0x83,0x00,0x03,0x30,0x42,0x00,0x01,0x14,0x40,0xff,0xfa,0x00,0x00,0x00,0x00,
+0x24,0x02,0x00,0x04,0x12,0x02,0x00,0x2c,0x24,0x05,0x0f,0x00,0x24,0x02,0x00,0x06,
+0x12,0x02,0x00,0x08,0x24,0x05,0x00,0x0f,0x3c,0x02,0xb0,0x03,0x34,0x42,0x02,0x00,
+0xa0,0x50,0x00,0x00,0x8f,0xbf,0x00,0x18,0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x20,0x24,0x04,0x0c,0x04,0x0c,0x00,0x18,0x5b,0x24,0x06,0x00,0x0f,
+0x24,0x04,0x0d,0x04,0x24,0x05,0x00,0x0f,0x0c,0x00,0x18,0x5b,0x24,0x06,0x00,0x0f,
+0x24,0x04,0x08,0x80,0x24,0x05,0x1e,0x00,0x0c,0x00,0x18,0x5b,0x24,0x06,0x00,0x0f,
+0x24,0x04,0x08,0x8c,0x24,0x05,0x0f,0x00,0x0c,0x00,0x18,0x5b,0x24,0x06,0x00,0x0f,
+0x24,0x04,0x08,0x24,0x3c,0x05,0x00,0x30,0x0c,0x00,0x18,0x5b,0x24,0x06,0x00,0x02,
+0x24,0x04,0x08,0x2c,0x3c,0x05,0x00,0x30,0x0c,0x00,0x18,0x5b,0x24,0x06,0x00,0x02,
+0x24,0x04,0x08,0x34,0x3c,0x05,0x00,0x30,0x0c,0x00,0x18,0x5b,0x24,0x06,0x00,0x02,
+0x24,0x04,0x08,0x3c,0x3c,0x05,0x00,0x30,0x0c,0x00,0x18,0x5b,0x24,0x06,0x00,0x02,
+0x08,0x00,0x1c,0x4f,0x3c,0x02,0xb0,0x03,0x24,0x04,0x08,0x8c,0x0c,0x00,0x18,0x5b,
+0x24,0x06,0x00,0x04,0x24,0x04,0x08,0x80,0x24,0x05,0x1e,0x00,0x0c,0x00,0x18,0x5b,
+0x24,0x06,0x00,0x04,0x24,0x04,0x0c,0x04,0x24,0x05,0x00,0x0f,0x0c,0x00,0x18,0x5b,
+0x24,0x06,0x00,0x04,0x24,0x04,0x0d,0x04,0x24,0x05,0x00,0x0f,0x0c,0x00,0x18,0x5b,
+0x24,0x06,0x00,0x04,0x24,0x04,0x08,0x24,0x3c,0x05,0x00,0x30,0x0c,0x00,0x18,0x5b,
+0x24,0x06,0x00,0x03,0x24,0x04,0x08,0x2c,0x3c,0x05,0x00,0x30,0x0c,0x00,0x18,0x5b,
+0x24,0x06,0x00,0x03,0x24,0x04,0x08,0x34,0x3c,0x05,0x00,0x30,0x0c,0x00,0x18,0x5b,
+0x24,0x06,0x00,0x02,0x3c,0x05,0x00,0x30,0x24,0x06,0x00,0x03,0x0c,0x00,0x18,0x5b,
+0x24,0x04,0x08,0x3c,0x02,0x20,0x20,0x21,0x24,0x05,0x00,0x14,0x0c,0x00,0x18,0xa0,
+0x24,0x06,0x01,0x07,0x08,0x00,0x1c,0x4f,0x3c,0x02,0xb0,0x03,0x3c,0x03,0xb0,0x03,
+0x3c,0x02,0x80,0x00,0x00,0x80,0x70,0x21,0x34,0x63,0x00,0x20,0x24,0x42,0x72,0x6c,
+0x3c,0x04,0xb0,0x03,0xac,0x62,0x00,0x00,0x34,0x84,0x00,0x30,0xad,0xc0,0x02,0xb8,
+0x8c,0x83,0x00,0x00,0x24,0x02,0x00,0xff,0xa5,0xc0,0x00,0x0a,0x00,0x00,0x30,0x21,
+0xa7,0x82,0x96,0x30,0x27,0x88,0x96,0x40,0xa5,0xc3,0x00,0x08,0x3c,0x07,0xb0,0x08,
+0x30,0xc2,0xff,0xff,0x00,0x02,0x20,0xc0,0x24,0xc3,0x00,0x01,0x00,0x82,0x10,0x21,
+0x00,0x60,0x30,0x21,0x00,0x02,0x10,0x80,0x30,0x63,0xff,0xff,0x00,0x48,0x10,0x21,
+0x00,0x87,0x20,0x21,0x28,0xc5,0x00,0xff,0xac,0x83,0x00,0x00,0x14,0xa0,0xff,0xf4,
+0xa4,0x43,0x00,0x00,0x3c,0x02,0xb0,0x08,0x34,0x03,0xff,0xff,0x34,0x42,0x07,0xf8,
+0x3c,0x04,0xb0,0x08,0xac,0x43,0x00,0x00,0xa7,0x83,0xba,0x1c,0x24,0x06,0x01,0x00,
+0x34,0x84,0x08,0x00,0x24,0xc2,0x00,0x01,0x28,0x43,0x02,0x00,0xac,0x82,0x00,0x00,
+0x00,0x40,0x30,0x21,0x14,0x60,0xff,0xfb,0x24,0x84,0x00,0x08,0x25,0xc2,0x00,0x0c,
+0x24,0x0a,0x00,0x02,0x3c,0x06,0xb0,0x03,0xaf,0x82,0xba,0x40,0x34,0xc6,0x00,0x64,
+0xa0,0x4a,0x00,0x18,0x94,0xc5,0x00,0x00,0x8f,0x82,0xba,0x40,0x25,0xc4,0x00,0x30,
+0x24,0x08,0x00,0x03,0x3c,0x03,0xb0,0x03,0xa0,0x45,0x00,0x21,0x34,0x63,0x00,0x66,
+0xaf,0x84,0xba,0x44,0xa0,0x88,0x00,0x18,0x94,0x65,0x00,0x00,0x8f,0x82,0xba,0x44,
+0x25,0xc4,0x00,0x54,0x25,0xc7,0x00,0x78,0xa0,0x45,0x00,0x21,0xaf,0x84,0xba,0x48,
+0xa0,0x88,0x00,0x18,0x94,0x65,0x00,0x00,0x8f,0x82,0xba,0x48,0x25,0xc8,0x00,0x9c,
+0x24,0x09,0x00,0x01,0xa0,0x45,0x00,0x21,0xaf,0x87,0xba,0x4c,0xa0,0xea,0x00,0x18,
+0x94,0xc4,0x00,0x00,0x8f,0x82,0xba,0x4c,0x3c,0x03,0xb0,0x03,0x34,0x63,0x00,0x62,
+0xa0,0x44,0x00,0x21,0xaf,0x88,0xba,0x50,0xa1,0x09,0x00,0x18,0x94,0x65,0x00,0x00,
+0x8f,0x82,0xba,0x50,0x25,0xc4,0x00,0xc0,0x25,0xc6,0x00,0xe4,0xa0,0x45,0x00,0x21,
+0xaf,0x84,0xba,0x54,0xa0,0x89,0x00,0x18,0x94,0x65,0x00,0x00,0x8f,0x82,0xba,0x54,
+0x3c,0x04,0xb0,0x03,0x34,0x84,0x00,0x60,0xa0,0x45,0x00,0x21,0xaf,0x86,0xba,0x58,
+0xa0,0xc0,0x00,0x18,0x94,0x85,0x00,0x00,0x8f,0x82,0xba,0x58,0x25,0xc3,0x01,0x08,
+0x25,0xc6,0x01,0x2c,0xa0,0x45,0x00,0x21,0xaf,0x83,0xba,0x5c,0xa0,0x60,0x00,0x18,
+0x94,0x87,0x00,0x00,0x8f,0x82,0xba,0x5c,0x25,0xc5,0x01,0x50,0x25,0xc4,0x01,0x74,
+0xa0,0x47,0x00,0x21,0x25,0xc8,0x01,0x98,0x25,0xc9,0x01,0xbc,0x25,0xca,0x01,0xe0,
+0x25,0xcb,0x02,0x04,0x25,0xcc,0x02,0x28,0x25,0xcd,0x02,0x4c,0x24,0x02,0x00,0x10,
+0x3c,0x03,0xb0,0x03,0xaf,0x86,0xba,0x60,0x34,0x63,0x00,0x38,0xa0,0xc0,0x00,0x18,
+0xaf,0x85,0xba,0x64,0xa0,0xa0,0x00,0x18,0xaf,0x84,0xba,0x68,0xa0,0x80,0x00,0x18,
+0xaf,0x88,0xba,0x6c,0xa1,0x00,0x00,0x18,0xaf,0x89,0xba,0x70,0xa1,0x20,0x00,0x18,
+0xaf,0x8a,0xba,0x74,0xa1,0x40,0x00,0x18,0xaf,0x8b,0xba,0x78,0xa1,0x60,0x00,0x18,
+0xaf,0x8c,0xba,0x7c,0xa1,0x80,0x00,0x18,0xaf,0x8d,0xba,0x80,0xa1,0xa2,0x00,0x18,
+0x94,0x64,0x00,0x00,0x8f,0x82,0xba,0x80,0x25,0xc5,0x02,0x70,0x3c,0x03,0xb0,0x03,
+0xa0,0x44,0x00,0x21,0x24,0x02,0x00,0x11,0xaf,0x85,0xba,0x84,0x34,0x63,0x00,0x6e,
+0xa0,0xa2,0x00,0x18,0x94,0x64,0x00,0x00,0x8f,0x82,0xba,0x84,0x25,0xc5,0x02,0x94,
+0x3c,0x03,0xb0,0x03,0xa0,0x44,0x00,0x21,0x24,0x02,0x00,0x12,0xaf,0x85,0xba,0x88,
+0x34,0x63,0x00,0x6c,0xa0,0xa2,0x00,0x18,0x94,0x64,0x00,0x00,0x8f,0x82,0xba,0x88,
+0x24,0x05,0xff,0xff,0x24,0x07,0x00,0x01,0xa0,0x44,0x00,0x21,0x24,0x06,0x00,0x12,
+0x27,0x84,0xba,0x40,0x8c,0x82,0x00,0x00,0x24,0xc6,0xff,0xff,0xa0,0x40,0x00,0x04,
+0x8c,0x83,0x00,0x00,0xa4,0x45,0x00,0x00,0xa4,0x45,0x00,0x02,0xa0,0x60,0x00,0x0a,
+0x8c,0x82,0x00,0x00,0xa4,0x65,0x00,0x06,0xa4,0x65,0x00,0x08,0xa0,0x40,0x00,0x10,
+0x8c,0x83,0x00,0x00,0xa4,0x45,0x00,0x0c,0xa4,0x45,0x00,0x0e,0xa0,0x60,0x00,0x12,
+0x8c,0x82,0x00,0x00,0x00,0x00,0x00,0x00,0xa0,0x40,0x00,0x16,0x8c,0x83,0x00,0x00,
+0xa4,0x45,0x00,0x14,0xa0,0x67,0x00,0x17,0x8c,0x82,0x00,0x00,0x24,0x84,0x00,0x04,
+0xa0,0x40,0x00,0x20,0x04,0xc1,0xff,0xe7,0xac,0x40,0x00,0x1c,0x03,0xe0,0x00,0x08,
+0x00,0x00,0x00,0x00,0x3c,0x02,0xb0,0x03,0x3c,0x03,0x80,0x00,0x34,0x42,0x00,0x20,
+0x24,0x63,0x75,0x54,0xac,0x43,0x00,0x00,0x90,0x82,0x00,0x10,0x00,0x80,0x60,0x21,
+0x10,0x40,0x00,0x56,0x00,0x00,0x70,0x21,0x97,0x82,0x96,0x30,0x94,0x8a,0x00,0x0c,
+0x27,0x87,0x96,0x40,0x00,0x02,0x40,0xc0,0x01,0x02,0x10,0x21,0x00,0x02,0x10,0x80,
+0x00,0x47,0x10,0x21,0x90,0x8b,0x00,0x18,0xa4,0x4a,0x00,0x00,0x94,0x83,0x00,0x0e,
+0x39,0x64,0x00,0x10,0x2c,0x84,0x00,0x01,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,
+0x34,0x85,0x00,0x02,0x39,0x63,0x00,0x11,0x00,0x83,0x28,0x0b,0x34,0xa3,0x00,0x08,
+0x39,0x64,0x00,0x12,0x00,0x02,0x10,0x80,0x00,0xa4,0x18,0x0b,0x00,0x47,0x10,0x21,
+0x94,0x49,0x00,0x04,0x34,0x64,0x00,0x20,0x00,0x6b,0x20,0x0b,0x34,0x83,0x00,0x40,
+0x39,0x62,0x00,0x01,0x00,0x82,0x18,0x0b,0x00,0x09,0x30,0xc0,0x34,0x64,0x00,0x80,
+0x00,0xc9,0x28,0x21,0x39,0x62,0x00,0x02,0x00,0x60,0x68,0x21,0x00,0x82,0x68,0x0a,
+0x00,0x05,0x28,0x80,0x3c,0x02,0xb0,0x08,0x00,0xa7,0x28,0x21,0x00,0xc2,0x30,0x21,
+0x01,0x02,0x40,0x21,0x34,0x03,0xff,0xff,0x35,0xa4,0x01,0x00,0x39,0x62,0x00,0x03,
+0x2d,0x67,0x00,0x13,0xad,0x0a,0x00,0x00,0xa4,0xa3,0x00,0x00,0xac,0xc3,0x00,0x00,
+0xa7,0x89,0x96,0x30,0x10,0xe0,0x00,0x0f,0x00,0x82,0x68,0x0a,0x3c,0x03,0x80,0x01,
+0x00,0x0b,0x10,0x80,0x24,0x63,0x09,0x4c,0x00,0x43,0x10,0x21,0x8c,0x44,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x08,0x00,0x00,0x00,0x00,0x3c,0x03,0xb0,0x03,
+0x34,0x63,0x00,0x60,0x94,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x14,0x00,
+0x00,0x02,0x74,0x03,0x3c,0x02,0xb0,0x03,0x34,0x42,0x00,0x3a,0x94,0x44,0x00,0x00,
+0x93,0x83,0x96,0x24,0x91,0x82,0x00,0x21,0x01,0xc4,0x20,0x21,0x91,0x85,0x00,0x10,
+0x00,0x04,0x24,0x00,0x00,0x62,0x18,0x21,0x00,0x04,0x74,0x03,0x00,0x6e,0x18,0x23,
+0x00,0x65,0x10,0x2a,0x00,0xa2,0x18,0x0a,0x00,0x0d,0x24,0x00,0x3c,0x02,0xb0,0x06,
+0x24,0x05,0xff,0xff,0x00,0x64,0x18,0x25,0x34,0x42,0x80,0x20,0xac,0x43,0x00,0x00,
+0xa5,0x85,0x00,0x0e,0xa1,0x80,0x00,0x10,0xa5,0x85,0x00,0x0c,0x03,0xe0,0x00,0x08,
+0x00,0x00,0x00,0x00,0x3c,0x03,0xb0,0x03,0x08,0x00,0x1d,0x99,0x34,0x63,0x00,0x62,
+0x3c,0x03,0xb0,0x03,0x08,0x00,0x1d,0x99,0x34,0x63,0x00,0x64,0x3c,0x03,0xb0,0x03,
+0x08,0x00,0x1d,0x99,0x34,0x63,0x00,0x66,0x3c,0x03,0xb0,0x03,0x08,0x00,0x1d,0x99,
+0x34,0x63,0x00,0x38,0x3c,0x03,0xb0,0x03,0x08,0x00,0x1d,0x99,0x34,0x63,0x00,0x6e,
+0x3c,0x03,0xb0,0x03,0x08,0x00,0x1d,0x99,0x34,0x63,0x00,0x6c,0x3c,0x03,0xb0,0x03,
+0x3c,0x02,0x80,0x00,0x34,0x63,0x00,0x20,0x24,0x42,0x77,0x1c,0x00,0x05,0x28,0x40,
+0xac,0x62,0x00,0x00,0x00,0xa6,0x28,0x21,0x2c,0xe2,0x00,0x10,0x14,0x80,0x00,0x06,
+0x00,0x00,0x18,0x21,0x10,0x40,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0xe0,0x18,0x21,
+0x03,0xe0,0x00,0x08,0x00,0x60,0x10,0x21,0x24,0x02,0x00,0x20,0x10,0xe2,0x00,0x06,
+0x2c,0xe4,0x00,0x10,0x24,0xa2,0x00,0x01,0x10,0x80,0xff,0xf9,0x00,0x02,0x11,0x00,
+0x08,0x00,0x1d,0xd4,0x00,0x47,0x18,0x21,0x08,0x00,0x1d,0xd4,0x24,0xa3,0x00,0x50,
+0x27,0xbd,0xff,0xc0,0xaf,0xb7,0x00,0x34,0xaf,0xb5,0x00,0x2c,0xaf,0xb4,0x00,0x28,
+0xaf,0xb2,0x00,0x20,0xaf,0xb1,0x00,0x1c,0xaf,0xbf,0x00,0x3c,0xaf,0xbe,0x00,0x38,
+0xaf,0xb6,0x00,0x30,0xaf,0xb3,0x00,0x24,0xaf,0xb0,0x00,0x18,0x84,0x85,0x00,0x08,
+0x00,0x80,0x90,0x21,0x3c,0x02,0x80,0x00,0x3c,0x04,0xb0,0x03,0x34,0x84,0x00,0x20,
+0x24,0x42,0x77,0x80,0x3c,0x03,0xb0,0x06,0x00,0x05,0x28,0x80,0xac,0x82,0x00,0x00,
+0x00,0xa3,0x28,0x21,0x3c,0x04,0xb0,0x06,0x8c,0xa3,0x00,0x00,0x34,0x84,0x80,0x24,
+0x8c,0xa6,0x00,0x00,0x8c,0x82,0x00,0x00,0x30,0x71,0xff,0xff,0x00,0x11,0x2a,0x00,
+0x34,0x42,0x01,0x00,0x3c,0x03,0xb0,0x00,0xac,0x82,0x00,0x00,0x00,0xa3,0x40,0x21,
+0x8d,0x1e,0x00,0x00,0x8d,0x13,0x00,0x04,0x96,0x44,0x00,0x08,0x00,0x11,0xa0,0xc0,
+0x02,0x91,0x10,0x21,0x00,0x02,0x38,0x80,0x00,0x13,0x12,0x02,0x30,0x42,0x00,0x1f,
+0x24,0x84,0x00,0x02,0x27,0x83,0x96,0x50,0xa6,0x42,0x00,0x06,0x30,0x84,0x01,0xff,
+0x24,0x02,0x00,0x10,0x00,0xe3,0x18,0x21,0xa6,0x44,0x00,0x08,0x8d,0x10,0x00,0x08,
+0xa0,0x62,0x00,0x06,0x86,0x44,0x00,0x06,0x27,0x82,0x96,0x44,0x00,0xe2,0x10,0x21,
+0xac,0x48,0x00,0x18,0x24,0x02,0x00,0x13,0x00,0x06,0xbc,0x02,0x10,0x82,0x00,0xe6,
+0x00,0x00,0xa8,0x21,0x3c,0x03,0xb0,0x03,0x34,0x63,0x01,0x00,0xa6,0x40,0x00,0x02,
+0x90,0x64,0x00,0x00,0x3c,0x02,0xb0,0x03,0x34,0x42,0x01,0x08,0x8c,0x45,0x00,0x00,
+0x00,0x10,0x1b,0xc2,0x00,0x04,0x20,0x82,0x27,0x82,0x96,0x40,0x00,0xe2,0x10,0x21,
+0x30,0x84,0x00,0x01,0x30,0x63,0x00,0x01,0xac,0x45,0x00,0x08,0x10,0x60,0x00,0xbc,
+0xaf,0xa4,0x00,0x10,0x00,0x10,0x16,0x82,0x30,0x46,0x00,0x01,0x00,0x10,0x12,0x02,
+0x00,0x10,0x19,0xc2,0x00,0x10,0x26,0x02,0x00,0x10,0x2e,0x42,0x30,0x47,0x00,0x7f,
+0x24,0x02,0x00,0x01,0x30,0x76,0x00,0x01,0x30,0x84,0x00,0x01,0x10,0xc2,0x00,0xa7,
+0x30,0xa3,0x00,0x01,0x0c,0x00,0x1d,0xc7,0x00,0x60,0x28,0x21,0x00,0x40,0xa8,0x21,
+0x02,0x91,0x10,0x21,0x00,0x02,0x10,0x80,0x2e,0xa4,0x00,0x54,0x27,0x85,0x96,0x50,
+0x27,0x83,0x96,0x48,0x00,0x04,0xa8,0x0a,0x00,0x45,0x28,0x21,0x26,0xc4,0x00,0x02,
+0x00,0x43,0x10,0x21,0xa0,0x44,0x00,0x06,0xa0,0x55,0x00,0x07,0xa0,0xb5,0x00,0x02,
+0xa0,0xb5,0x00,0x01,0x00,0x10,0x14,0x82,0x00,0x10,0x1d,0xc2,0x30,0x48,0x00,0x01,
+0x00,0x13,0x15,0x82,0x00,0x13,0x21,0x82,0x30,0x63,0x00,0x01,0x00,0x10,0x2c,0x02,
+0x00,0x10,0x34,0x42,0x30,0x49,0x00,0x03,0x24,0x02,0x00,0x01,0xa6,0x5e,0x00,0x04,
+0xa6,0x43,0x00,0x00,0x30,0x8a,0x00,0x01,0x32,0x73,0x00,0x07,0x30,0xa5,0x00,0x01,
+0x30,0xc6,0x00,0x01,0x11,0x02,0x00,0x77,0x32,0x07,0x00,0x7f,0x15,0x40,0x00,0x03,
+0x00,0x00,0x00,0x00,0x15,0x20,0x00,0x68,0x24,0x02,0x00,0x01,0x96,0x42,0x00,0x04,
+0x00,0x00,0x00,0x00,0x24,0x42,0x00,0x04,0xa6,0x42,0x00,0x04,0x00,0xa0,0x20,0x21,
+0x00,0xc0,0x28,0x21,0x0c,0x00,0x1d,0xc7,0x01,0x00,0x30,0x21,0x02,0x91,0x18,0x21,
+0x00,0x03,0x38,0x80,0x2e,0xa5,0x00,0x54,0x27,0x84,0x96,0x50,0x00,0xe4,0x20,0x21,
+0x00,0x05,0x10,0x0a,0xa0,0x82,0x00,0x00,0xa0,0x80,0x00,0x04,0xa0,0x80,0x00,0x05,
+0x96,0x45,0x00,0x04,0x27,0x82,0x96,0x40,0x00,0xe2,0x10,0x21,0xa4,0x45,0x00,0x06,
+0x27,0x83,0x96,0x44,0x00,0xe3,0x18,0x21,0x92,0x45,0x00,0x01,0x8c,0x66,0x00,0x18,
+0x27,0x82,0x96,0x60,0x00,0xe2,0x10,0x21,0xa0,0x40,0x00,0x00,0xa0,0x85,0x00,0x07,
+0x94,0xc3,0x00,0x10,0x24,0x02,0x00,0x04,0x30,0x63,0x00,0x0f,0x10,0x62,0x00,0x42,
+0x24,0xc6,0x00,0x10,0x94,0xc3,0x00,0x16,0x27,0x88,0x96,0x58,0x00,0xe8,0x10,0x21,
+0xa4,0x43,0x00,0x02,0x94,0xc2,0x00,0x04,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x01,
+0x14,0x40,0x00,0x30,0x02,0x91,0x20,0x21,0x94,0xc2,0x00,0x00,0x24,0x03,0x00,0xa4,
+0x30,0x42,0x00,0xff,0x10,0x43,0x00,0x2b,0x00,0x00,0x00,0x00,0x94,0xc2,0x00,0x00,
+0x24,0x03,0x00,0x88,0x30,0x42,0x00,0x88,0x10,0x43,0x00,0x20,0x02,0x91,0x18,0x21,
+0x27,0x84,0x96,0x60,0x00,0x03,0x18,0x80,0x00,0x64,0x18,0x21,0x8c,0x62,0x00,0x00,
+0x3c,0x04,0x00,0x80,0x00,0x44,0x10,0x25,0xac,0x62,0x00,0x00,0x00,0x17,0x10,0xc0,
+0x00,0x57,0x10,0x21,0x27,0x84,0x96,0x40,0x00,0x02,0x10,0x80,0x00,0x44,0x10,0x21,
+0x94,0x45,0x00,0x00,0x02,0x91,0x18,0x21,0x00,0x03,0x18,0x80,0x00,0x64,0x20,0x21,
+0x24,0x02,0xff,0xff,0x00,0x68,0x18,0x21,0xa0,0x73,0x00,0x00,0xa4,0x82,0x00,0x02,
+0xa4,0x97,0x00,0x04,0xae,0x51,0x02,0xb8,0xa6,0x45,0x00,0x0a,0x7b,0xbe,0x01,0xfc,
+0x7b,0xb6,0x01,0xbc,0x7b,0xb4,0x01,0x7c,0x7b,0xb2,0x01,0x3c,0x7b,0xb0,0x00,0xfc,
+0x24,0x02,0x00,0x01,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x40,0x94,0xc2,0x00,0x18,
+0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x60,0x10,0x40,0xff,0xdd,0x02,0x91,0x18,0x21,
+0x02,0x91,0x20,0x21,0x27,0x82,0x96,0x60,0x00,0x04,0x20,0x80,0x00,0x82,0x20,0x21,
+0x8c,0x83,0x00,0x00,0x3c,0x02,0xff,0x7f,0x34,0x42,0xff,0xff,0x00,0x62,0x18,0x24,
+0x08,0x00,0x1e,0x97,0xac,0x83,0x00,0x00,0x27,0x88,0x96,0x58,0x00,0xe8,0x10,0x21,
+0x08,0x00,0x1e,0x81,0xa4,0x40,0x00,0x02,0x11,0x22,0x00,0x07,0x00,0x00,0x00,0x00,
+0x2d,0x22,0x00,0x02,0x14,0x40,0xff,0x9a,0x00,0xa0,0x20,0x21,0x96,0x42,0x00,0x04,
+0x08,0x00,0x1e,0x5e,0x24,0x42,0x00,0x0c,0x96,0x42,0x00,0x04,0x08,0x00,0x1e,0x5e,
+0x24,0x42,0x00,0x08,0x8f,0xa2,0x00,0x10,0x00,0x00,0x00,0x00,0x14,0x48,0xff,0x87,
+0x02,0x91,0x18,0x21,0x27,0x82,0x96,0x44,0x00,0x03,0x18,0x80,0x00,0x62,0x18,0x21,
+0x8c,0x64,0x00,0x18,0x3c,0x02,0xff,0xfb,0x34,0x42,0xff,0xff,0x02,0x02,0x10,0x24,
+0xac,0x82,0x00,0x08,0x08,0x00,0x1e,0x57,0x00,0x00,0x40,0x21,0x8f,0xa2,0x00,0x10,
+0x00,0x00,0x00,0x00,0x14,0x46,0xff,0x57,0x3c,0x02,0xfb,0xff,0x34,0x42,0xff,0xff,
+0x02,0x02,0x10,0x24,0xad,0x02,0x00,0x08,0x08,0x00,0x1e,0x35,0x00,0x00,0x30,0x21,
+0x93,0x88,0xc1,0x54,0x00,0x10,0x1e,0x42,0x00,0x10,0x26,0x82,0x27,0x82,0x96,0x48,
+0x2d,0x05,0x00,0x0c,0x00,0xe2,0x48,0x21,0x30,0x63,0x00,0x01,0x30,0x86,0x00,0x01,
+0x14,0xa0,0x00,0x06,0x01,0x00,0x38,0x21,0x00,0x03,0x10,0x40,0x00,0x46,0x10,0x21,
+0x00,0x02,0x11,0x00,0x01,0x02,0x10,0x21,0x24,0x47,0x00,0x04,0x02,0x91,0x10,0x21,
+0x00,0x02,0x10,0x80,0x27,0x84,0x96,0x50,0x27,0x83,0x96,0x48,0x00,0x44,0x20,0x21,
+0x00,0x43,0x10,0x21,0xa1,0x27,0x00,0x07,0xa0,0x40,0x00,0x06,0xa0,0x80,0x00,0x02,
+0x08,0x00,0x1e,0x45,0xa0,0x80,0x00,0x01,0x24,0x02,0x00,0x01,0xa6,0x42,0x00,0x02,
+0x0c,0x00,0x04,0x40,0x01,0x00,0x20,0x21,0x08,0x00,0x1e,0xa7,0x00,0x00,0x00,0x00,
+0x30,0xa7,0xff,0xff,0x00,0x07,0x18,0xc0,0x00,0x67,0x18,0x21,0x3c,0x06,0xb0,0x03,
+0x3c,0x02,0x80,0x00,0x24,0x42,0x7c,0x10,0x27,0x85,0x96,0x50,0x00,0x03,0x18,0x80,
+0x34,0xc6,0x00,0x20,0x00,0x65,0x18,0x21,0xac,0xc2,0x00,0x00,0x80,0x62,0x00,0x07,
+0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x29,0x00,0x80,0x28,0x21,0x90,0x82,0x00,0x16,
+0x00,0x00,0x00,0x00,0x34,0x42,0x00,0x02,0x30,0x43,0x00,0x01,0x14,0x60,0x00,0x02,
+0xa0,0x82,0x00,0x16,0xa0,0x80,0x00,0x17,0x90,0xa2,0x00,0x04,0x3c,0x03,0xb0,0x03,
+0x27,0x86,0x96,0x40,0x14,0x40,0x00,0x06,0x34,0x63,0x00,0x20,0x24,0x02,0x00,0x01,
+0xa0,0xa2,0x00,0x04,0xa4,0xa7,0x00,0x02,0x03,0xe0,0x00,0x08,0xa4,0xa7,0x00,0x00,
+0x94,0xa4,0x00,0x02,0x3c,0x02,0x80,0x01,0x24,0x42,0x93,0x34,0xac,0x62,0x00,0x00,
+0x00,0x04,0x18,0xc0,0x00,0x64,0x18,0x21,0x00,0x03,0x18,0x80,0x00,0x66,0x18,0x21,
+0x94,0x62,0x00,0x04,0xa4,0x67,0x00,0x02,0x3c,0x03,0xb0,0x08,0x00,0x02,0x20,0xc0,
+0x00,0x82,0x10,0x21,0x00,0x02,0x10,0x80,0x00,0x46,0x10,0x21,0x00,0x83,0x20,0x21,
+0xa4,0x47,0x00,0x00,0xac,0x87,0x00,0x00,0x90,0xa2,0x00,0x04,0xa4,0xa7,0x00,0x02,
+0x24,0x42,0x00,0x01,0x03,0xe0,0x00,0x08,0xa0,0xa2,0x00,0x04,0x90,0x82,0x00,0x16,
+0x24,0x85,0x00,0x06,0x34,0x42,0x00,0x01,0x30,0x43,0x00,0x02,0x14,0x60,0xff,0xda,
+0xa0,0x82,0x00,0x16,0x24,0x02,0x00,0x01,0x08,0x00,0x1f,0x1a,0xa0,0x82,0x00,0x17,
+0x27,0xbd,0xff,0xe8,0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x14,0x00,0x80,0x80,0x21,
+0x84,0x84,0x00,0x02,0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,0x34,0x63,0x00,0x20,
+0x24,0x42,0x7d,0x10,0x10,0x80,0x00,0x38,0xac,0x62,0x00,0x00,0x8e,0x04,0x02,0xb8,
+0x0c,0x00,0x02,0x7e,0x00,0x00,0x00,0x00,0x97,0x88,0x96,0x30,0x96,0x0c,0x02,0xba,
+0x3c,0x04,0xb0,0x08,0x00,0x08,0x30,0xc0,0x00,0xc4,0x10,0x21,0xac,0x4c,0x00,0x00,
+0x8e,0x03,0x02,0xb8,0x27,0x89,0x96,0x40,0x34,0x0b,0xff,0xff,0x00,0x03,0x10,0xc0,
+0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x80,0x00,0x49,0x10,0x21,0x94,0x4a,0x00,0x04,
+0x00,0xc8,0x30,0x21,0x00,0x06,0x30,0x80,0x00,0x0a,0x28,0xc0,0x00,0xa4,0x20,0x21,
+0xac,0x8b,0x00,0x00,0x8e,0x02,0x02,0xb8,0x27,0x84,0x96,0x50,0x00,0xaa,0x28,0x21,
+0x00,0x02,0x18,0xc0,0x00,0x62,0x18,0x21,0x00,0x03,0x18,0x80,0x27,0x82,0x96,0x44,
+0x00,0x62,0x10,0x21,0x8c,0x47,0x00,0x18,0x00,0x64,0x18,0x21,0x80,0x68,0x00,0x06,
+0x8c,0xe4,0x00,0x00,0x00,0x05,0x28,0x80,0x3c,0x03,0xb0,0x06,0x30,0x84,0xff,0xff,
+0x00,0x88,0x20,0x21,0x30,0x82,0x00,0xff,0x00,0x02,0x10,0x2b,0x00,0x04,0x22,0x02,
+0x00,0x82,0x20,0x21,0x3c,0x02,0x00,0x04,0x00,0xa9,0x28,0x21,0x00,0x82,0x20,0x25,
+0x00,0xc9,0x30,0x21,0x34,0x63,0x80,0x20,0xa4,0xcc,0x00,0x00,0xac,0x64,0x00,0x00,
+0xa4,0xab,0x00,0x00,0xa7,0x8a,0x96,0x30,0x8f,0xbf,0x00,0x14,0x8f,0xb0,0x00,0x10,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x18,0x86,0x03,0x00,0x06,0x27,0x82,0xba,0x40,
+0x96,0x05,0x02,0xba,0x00,0x03,0x18,0x80,0x00,0x62,0x18,0x21,0x8c,0x64,0x00,0x00,
+0x0c,0x00,0x1f,0x04,0x00,0x00,0x00,0x00,0x08,0x00,0x1f,0x82,0x00,0x00,0x00,0x00,
+0x94,0x88,0x00,0x00,0x00,0x80,0x58,0x21,0x27,0x8a,0x96,0x40,0x00,0x08,0x18,0xc0,
+0x00,0x68,0x18,0x21,0x3c,0x04,0xb0,0x03,0x00,0x03,0x18,0x80,0x3c,0x02,0x80,0x00,
+0x00,0x6a,0x18,0x21,0x34,0x84,0x00,0x20,0x24,0x42,0x7e,0x40,0x30,0xa5,0xff,0xff,
+0xac,0x82,0x00,0x00,0x94,0x67,0x00,0x02,0x11,0x05,0x00,0x35,0x24,0x04,0x00,0x01,
+0x91,0x66,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x86,0x10,0x2a,0x10,0x40,0x00,0x10,
+0x00,0xc0,0x48,0x21,0x3c,0x0d,0xb0,0x03,0x01,0x40,0x60,0x21,0x35,0xad,0x00,0x20,
+0x10,0xe5,0x00,0x0d,0x24,0x84,0x00,0x01,0x00,0x07,0x10,0xc0,0x00,0x47,0x10,0x21,
+0x00,0x02,0x10,0x80,0x01,0x20,0x30,0x21,0x00,0x4a,0x10,0x21,0x00,0x86,0x18,0x2a,
+0x00,0xe0,0x40,0x21,0x94,0x47,0x00,0x02,0x14,0x60,0xff,0xf5,0x00,0x00,0x00,0x00,
+0x03,0xe0,0x00,0x08,0x00,0x00,0x10,0x21,0x00,0x08,0x20,0xc0,0x00,0x88,0x20,0x21,
+0x24,0xc2,0xff,0xff,0x00,0x04,0x20,0x80,0xa1,0x62,0x00,0x04,0x00,0x8c,0x20,0x21,
+0x94,0x83,0x00,0x04,0x00,0x07,0x10,0xc0,0x00,0x47,0x10,0x21,0x00,0x02,0x10,0x80,
+0x00,0x4c,0x10,0x21,0x00,0x03,0x28,0xc0,0x94,0x46,0x00,0x02,0x00,0xa3,0x18,0x21,
+0x00,0x03,0x18,0x80,0x00,0x6c,0x18,0x21,0xa4,0x66,0x00,0x00,0xa4,0x86,0x00,0x02,
+0x95,0x64,0x00,0x02,0x3c,0x03,0xb0,0x08,0x3c,0x02,0x80,0x01,0x00,0xa3,0x28,0x21,
+0x24,0x42,0x93,0x34,0xad,0xa2,0x00,0x00,0x10,0x87,0x00,0x03,0xac,0xa6,0x00,0x00,
+0x03,0xe0,0x00,0x08,0x24,0x02,0x00,0x01,0x08,0x00,0x1f,0xd0,0xa5,0x68,0x00,0x02,
+0x91,0x62,0x00,0x04,0xa5,0x67,0x00,0x00,0x24,0x42,0xff,0xff,0x30,0x43,0x00,0xff,
+0x14,0x60,0xff,0xf7,0xa1,0x62,0x00,0x04,0x24,0x02,0xff,0xff,0x08,0x00,0x1f,0xd0,
+0xa5,0x62,0x00,0x02,0x00,0x05,0x40,0xc0,0x01,0x05,0x30,0x21,0x27,0xbd,0xff,0xd8,
+0x00,0x06,0x30,0x80,0x27,0x82,0x96,0x44,0xaf,0xb2,0x00,0x18,0xaf,0xb1,0x00,0x14,
+0xaf,0xbf,0x00,0x20,0xaf,0xb3,0x00,0x1c,0xaf,0xb0,0x00,0x10,0x00,0xc2,0x10,0x21,
+0x8c,0x47,0x00,0x18,0x00,0xa0,0x90,0x21,0x3c,0x02,0x80,0x00,0x3c,0x05,0xb0,0x03,
+0x34,0xa5,0x00,0x20,0x24,0x42,0x7f,0x74,0xac,0xa2,0x00,0x00,0x27,0x83,0x96,0x50,
+0x00,0xc3,0x30,0x21,0x8c,0xe2,0x00,0x00,0x80,0xc5,0x00,0x06,0x00,0x80,0x88,0x21,
+0x30,0x42,0xff,0xff,0x00,0x45,0x10,0x21,0x30,0x43,0x00,0xff,0x10,0x60,0x00,0x02,
+0x00,0x02,0x12,0x02,0x24,0x42,0x00,0x01,0x30,0x53,0x00,0xff,0x01,0x12,0x10,0x21,
+0x00,0x02,0x10,0x80,0x27,0x83,0x96,0x50,0x00,0x43,0x10,0x21,0x80,0x44,0x00,0x07,
+0x00,0x00,0x00,0x00,0x10,0x80,0x00,0x4b,0x26,0x24,0x00,0x06,0x32,0x50,0xff,0xff,
+0x02,0x20,0x20,0x21,0x0c,0x00,0x1f,0x90,0x02,0x00,0x28,0x21,0x92,0x22,0x00,0x10,
+0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x2e,0x3c,0x03,0xb0,0x08,0x3c,0x09,0x80,0x01,
+0x27,0x88,0x96,0x40,0xa6,0x32,0x00,0x0c,0x00,0x10,0x20,0xc0,0x00,0x90,0x20,0x21,
+0x00,0x04,0x20,0x80,0x00,0x88,0x20,0x21,0x94,0x82,0x00,0x04,0x3c,0x03,0xb0,0x08,
+0x3c,0x07,0xb0,0x03,0x00,0x02,0x28,0xc0,0x00,0xa2,0x10,0x21,0x00,0x02,0x10,0x80,
+0x00,0x48,0x10,0x21,0x00,0xa3,0x28,0x21,0x25,0x26,0x93,0x34,0x34,0x03,0xff,0xff,
+0x34,0xe7,0x00,0x20,0xac,0xe6,0x00,0x00,0xa4,0x83,0x00,0x02,0xa4,0x43,0x00,0x00,
+0xac,0xa3,0x00,0x00,0x92,0x22,0x00,0x10,0x92,0x23,0x00,0x0a,0xa6,0x32,0x00,0x0e,
+0x02,0x62,0x10,0x21,0x14,0x60,0x00,0x05,0xa2,0x22,0x00,0x10,0x92,0x22,0x00,0x16,
+0x00,0x00,0x00,0x00,0x30,0x42,0x00,0xfe,0xa2,0x22,0x00,0x16,0x92,0x22,0x00,0x04,
+0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x05,0x00,0x00,0x00,0x00,0x92,0x22,0x00,0x16,
+0x00,0x00,0x00,0x00,0x30,0x42,0x00,0xfd,0xa2,0x22,0x00,0x16,0x8f,0xbf,0x00,0x20,
+0x7b,0xb2,0x00,0xfc,0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x28,
+0x96,0x22,0x00,0x0e,0x27,0x88,0x96,0x40,0x00,0x02,0x20,0xc0,0x00,0x82,0x20,0x21,
+0x00,0x04,0x20,0x80,0x00,0x88,0x20,0x21,0x94,0x82,0x00,0x04,0x3c,0x06,0xb0,0x03,
+0x3c,0x09,0x80,0x01,0x00,0x02,0x28,0xc0,0x00,0xa2,0x10,0x21,0x00,0x02,0x10,0x80,
+0x00,0xa3,0x28,0x21,0x00,0x48,0x10,0x21,0x34,0xc6,0x00,0x20,0x25,0x23,0x93,0x34,
+0xac,0xc3,0x00,0x00,0xa4,0x50,0x00,0x00,0xac,0xb0,0x00,0x00,0x08,0x00,0x20,0x0e,
+0xa4,0x90,0x00,0x02,0x08,0x00,0x20,0x05,0x32,0x50,0xff,0xff,0x3c,0x03,0xb0,0x03,
+0x3c,0x02,0x80,0x01,0x24,0x42,0x81,0x3c,0x34,0x63,0x00,0x20,0xac,0x62,0x00,0x00,
+0x90,0x82,0x00,0x04,0x97,0xaa,0x00,0x12,0x00,0x80,0x60,0x21,0x30,0xa8,0xff,0xff,
+0x00,0x4a,0x20,0x23,0x34,0x09,0xff,0xff,0x30,0xcf,0xff,0xff,0x30,0xee,0xff,0xff,
+0x11,0x09,0x00,0x73,0xa1,0x84,0x00,0x04,0x00,0x0e,0xc0,0xc0,0x00,0x08,0x10,0xc0,
+0x00,0x48,0x10,0x21,0x03,0x0e,0x20,0x21,0x27,0x8d,0x96,0x40,0x00,0x04,0x20,0x80,
+0x00,0x02,0x10,0x80,0x00,0x4d,0x10,0x21,0x00,0x8d,0x20,0x21,0x94,0x86,0x00,0x02,
+0x94,0x43,0x00,0x04,0x3c,0x19,0x80,0x01,0xa4,0x46,0x00,0x02,0x00,0x03,0x28,0xc0,
+0x00,0xa3,0x18,0x21,0x94,0x87,0x00,0x02,0x3c,0x02,0xb0,0x08,0x00,0x03,0x18,0x80,
+0x00,0xa2,0x28,0x21,0x00,0x6d,0x18,0x21,0x27,0x22,0x93,0x34,0x3c,0x01,0xb0,0x03,
+0xac,0x22,0x00,0x20,0xa4,0x66,0x00,0x00,0x10,0xe9,0x00,0x57,0xac,0xa6,0x00,0x00,
+0x01,0xe0,0x30,0x21,0x11,0x40,0x00,0x1d,0x00,0x00,0x48,0x21,0x01,0x40,0x38,0x21,
+0x27,0x8b,0x96,0x44,0x27,0x8a,0x96,0x50,0x00,0x06,0x40,0xc0,0x01,0x06,0x18,0x21,
+0x00,0x03,0x18,0x80,0x00,0x6b,0x10,0x21,0x8c,0x44,0x00,0x18,0x00,0x6a,0x18,0x21,
+0x80,0x65,0x00,0x06,0x8c,0x82,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x42,0xff,0xff,
+0x00,0x45,0x10,0x21,0x30,0x44,0x00,0xff,0x00,0x02,0x12,0x02,0x01,0x22,0x18,0x21,
+0x24,0x62,0x00,0x01,0x14,0x80,0x00,0x02,0x30,0x49,0x00,0xff,0x30,0x69,0x00,0xff,
+0x01,0x06,0x10,0x21,0x00,0x02,0x10,0x80,0x00,0x4d,0x10,0x21,0x24,0xe7,0xff,0xff,
+0x94,0x46,0x00,0x02,0x14,0xe0,0xff,0xe9,0x00,0x06,0x40,0xc0,0x91,0x82,0x00,0x10,
+0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x20,0x3c,0x06,0xb0,0x03,0xa5,0x8f,0x00,0x0c,
+0x03,0x0e,0x20,0x21,0x00,0x04,0x20,0x80,0x00,0x8d,0x20,0x21,0x94,0x82,0x00,0x04,
+0x3c,0x03,0xb0,0x08,0x3c,0x07,0xb0,0x03,0x00,0x02,0x28,0xc0,0x00,0xa2,0x10,0x21,
+0x00,0x02,0x10,0x80,0x00,0x4d,0x10,0x21,0x00,0xa3,0x28,0x21,0x27,0x26,0x93,0x34,
+0x34,0x03,0xff,0xff,0x34,0xe7,0x00,0x20,0xac,0xe6,0x00,0x00,0xa4,0x83,0x00,0x02,
+0xa4,0x43,0x00,0x00,0xac,0xa3,0x00,0x00,0x91,0x82,0x00,0x10,0x91,0x83,0x00,0x04,
+0xa5,0x8e,0x00,0x0e,0x01,0x22,0x10,0x21,0x14,0x60,0x00,0x05,0xa1,0x82,0x00,0x10,
+0x91,0x82,0x00,0x16,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0xfd,0xa1,0x82,0x00,0x16,
+0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x95,0x82,0x00,0x0e,0x3c,0x03,0xb0,0x08,
+0x00,0x02,0x20,0xc0,0x00,0x82,0x20,0x21,0x00,0x04,0x20,0x80,0x00,0x8d,0x20,0x21,
+0x94,0x82,0x00,0x04,0x34,0xc6,0x00,0x20,0x27,0x27,0x93,0x34,0x00,0x02,0x28,0xc0,
+0x00,0xa2,0x10,0x21,0x00,0x02,0x10,0x80,0x00,0xa3,0x28,0x21,0x00,0x4d,0x10,0x21,
+0xac,0xc7,0x00,0x00,0xa4,0x8f,0x00,0x02,0xa4,0x4f,0x00,0x00,0xac,0xaf,0x00,0x00,
+0x08,0x00,0x20,0x9d,0x03,0x0e,0x20,0x21,0x08,0x00,0x20,0x78,0xa5,0x88,0x00,0x02,
+0x00,0x0e,0xc0,0xc0,0x03,0x0e,0x10,0x21,0x00,0x02,0x10,0x80,0x27,0x8d,0x96,0x40,
+0x00,0x4d,0x10,0x21,0x94,0x43,0x00,0x02,0x30,0x84,0x00,0xff,0x14,0x80,0x00,0x05,
+0xa5,0x83,0x00,0x00,0x24,0x02,0xff,0xff,0x3c,0x19,0x80,0x01,0x08,0x00,0x20,0x78,
+0xa5,0x82,0x00,0x02,0x08,0x00,0x20,0x78,0x3c,0x19,0x80,0x01,0x3c,0x08,0xb0,0x03,
+0x3c,0x02,0x80,0x01,0x27,0xbd,0xff,0x80,0x24,0x42,0x83,0x7c,0x35,0x08,0x00,0x20,
+0xaf,0xb2,0x00,0x60,0xaf,0xb1,0x00,0x5c,0xaf,0xbf,0x00,0x7c,0xaf,0xbe,0x00,0x78,
+0xaf,0xb7,0x00,0x74,0xaf,0xb6,0x00,0x70,0xaf,0xb5,0x00,0x6c,0xaf,0xb4,0x00,0x68,
+0xaf,0xb3,0x00,0x64,0xaf,0xb0,0x00,0x58,0xad,0x02,0x00,0x00,0xaf,0xa4,0x00,0x80,
+0x90,0x83,0x00,0x0a,0x27,0x82,0xba,0x40,0xaf,0xa6,0x00,0x88,0x00,0x03,0x18,0x80,
+0x00,0x62,0x18,0x21,0x8c,0x7e,0x00,0x00,0xaf,0xa7,0x00,0x8c,0x27,0x86,0x96,0x44,
+0x97,0xc3,0x00,0x14,0x30,0xb1,0xff,0xff,0x00,0x03,0x20,0xc0,0xaf,0xa3,0x00,0x1c,
+0x00,0x83,0x18,0x21,0xaf,0xa4,0x00,0x50,0x00,0x03,0x18,0x80,0x27,0x84,0x96,0x50,
+0x00,0x64,0x20,0x21,0x80,0x82,0x00,0x06,0x00,0x66,0x18,0x21,0x8c,0x66,0x00,0x18,
+0x24,0x42,0x00,0x02,0x00,0x02,0x1f,0xc2,0x8c,0xc4,0x00,0x08,0x00,0x43,0x10,0x21,
+0x00,0x02,0x10,0x43,0x00,0x02,0x10,0x40,0x00,0x04,0x2f,0xc2,0x00,0x04,0x1c,0x82,
+0x00,0x04,0x24,0x42,0x30,0x63,0x00,0x01,0x00,0xc2,0x38,0x21,0x30,0x84,0x00,0x01,
+0x24,0x02,0x00,0x01,0xaf,0xa5,0x00,0x3c,0xaf,0xa3,0x00,0x34,0xaf,0xa4,0x00,0x38,
+0xaf,0xa0,0x00,0x40,0xaf,0xa0,0x00,0x44,0xaf,0xa2,0x00,0x20,0x83,0xc3,0x00,0x12,
+0x8f,0xb2,0x00,0x1c,0x8c,0xd0,0x00,0x0c,0x14,0xa0,0x01,0xa2,0xaf,0xa3,0x00,0x28,
+0x00,0x10,0x10,0x82,0x30,0x45,0x00,0x07,0x10,0xa0,0x00,0x11,0xaf,0xa0,0x00,0x30,
+0x8f,0xa4,0x00,0x90,0x27,0x82,0x86,0xb0,0x00,0x04,0x18,0x40,0x00,0x62,0x18,0x21,
+0x24,0xa2,0x00,0x06,0x8f,0xa5,0x00,0x20,0x94,0x64,0x00,0x00,0x00,0x45,0x10,0x04,
+0x00,0x44,0x00,0x1a,0x14,0x80,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x07,0x00,0x0d,
+0x00,0x00,0x10,0x12,0x24,0x42,0x00,0x20,0x30,0x42,0xff,0xfc,0xaf,0xa2,0x00,0x30,
+0x8f,0xa3,0x00,0x1c,0x8f,0xa4,0x00,0x28,0x34,0x02,0xff,0xff,0xaf,0xa0,0x00,0x2c,
+0xaf,0xa2,0x00,0x48,0xaf,0xa3,0x00,0x4c,0x00,0x60,0xb0,0x21,0x00,0x00,0xb8,0x21,
+0x18,0x80,0x00,0x3b,0xaf,0xa0,0x00,0x24,0x00,0x11,0x89,0x02,0xaf,0xb1,0x00,0x54,
+0x00,0x80,0xa8,0x21,0x00,0x12,0xa0,0xc0,0x02,0x92,0x10,0x21,0x00,0x02,0x80,0x80,
+0x27,0x85,0x96,0x40,0x02,0x05,0x18,0x21,0x94,0x63,0x00,0x02,0x02,0x40,0x20,0x21,
+0x00,0x00,0x28,0x21,0x0c,0x00,0x17,0x43,0xaf,0xa3,0x00,0x18,0x90,0x42,0x00,0x00,
+0x24,0x03,0x00,0x08,0x30,0x42,0x00,0x0c,0x10,0x43,0x01,0x5c,0x24,0x04,0x00,0x01,
+0x24,0x02,0x00,0x01,0x10,0x82,0x01,0x3b,0x3c,0x03,0xb0,0x03,0x34,0x63,0x01,0x04,
+0x02,0x92,0x20,0x21,0x94,0x66,0x00,0x00,0x00,0x04,0x20,0x80,0x27,0x82,0x96,0x48,
+0x00,0x82,0x10,0x21,0x27,0x83,0x96,0x50,0x80,0x45,0x00,0x06,0x00,0x83,0x20,0x21,
+0x30,0xd0,0xff,0xff,0x80,0x91,0x00,0x05,0x80,0x93,0x00,0x04,0x8f,0xa4,0x00,0x80,
+0x32,0x03,0x00,0xff,0x00,0x10,0x12,0x03,0x38,0xa5,0x00,0x00,0x00,0x60,0x80,0x21,
+0x00,0x45,0x80,0x0a,0xa4,0x82,0x00,0x44,0x12,0x20,0x01,0x1c,0xa4,0x83,0x00,0x46,
+0x02,0x71,0x10,0x21,0x00,0x50,0x10,0x2a,0x14,0x40,0x00,0xbb,0x02,0x92,0x10,0x21,
+0x93,0x82,0x91,0x51,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x01,0x14,0x40,0x00,0xae,
+0x02,0x92,0x28,0x21,0x26,0xe2,0x00,0x01,0x30,0x57,0xff,0xff,0x02,0x40,0xb0,0x21,
+0x26,0xb5,0xff,0xff,0x8f,0xb2,0x00,0x18,0x16,0xa0,0xff,0xca,0x00,0x00,0x00,0x00,
+0x16,0xe0,0x00,0x9e,0x02,0xc0,0x38,0x21,0x8f,0xa5,0x00,0x90,0x00,0x00,0x00,0x00,
+0x2c,0xa2,0x00,0x10,0x10,0x40,0x00,0x2e,0x00,0x00,0x00,0x00,0x8f,0xa2,0x00,0x24,
+0x00,0x00,0x00,0x00,0x18,0x40,0x00,0x2a,0x24,0x03,0x00,0x01,0x97,0xd2,0x00,0x14,
+0xa3,0xc3,0x00,0x12,0x00,0x12,0x10,0xc0,0x00,0x52,0x10,0x21,0x00,0x02,0x80,0x80,
+0x27,0x82,0x96,0x50,0x02,0x02,0x10,0x21,0x80,0x43,0x00,0x06,0x27,0x84,0x96,0x44,
+0x02,0x04,0x20,0x21,0x24,0x63,0x00,0x02,0x00,0x03,0x17,0xc2,0x00,0x62,0x18,0x21,
+0x8c,0x85,0x00,0x18,0x00,0x03,0x18,0x43,0x00,0x03,0x18,0x40,0x00,0xa3,0x38,0x21,
+0x8f,0xa3,0x00,0x3c,0x00,0x00,0x00,0x00,0x14,0x60,0x00,0x0d,0x00,0x00,0x00,0x00,
+0x27,0x82,0x96,0x40,0x02,0x02,0x10,0x21,0x94,0x43,0x00,0x06,0x24,0x02,0x00,0x01,
+0xa7,0xc3,0x00,0x1a,0x7b,0xbe,0x03,0xfc,0x7b,0xb6,0x03,0xbc,0x7b,0xb4,0x03,0x7c,
+0x7b,0xb2,0x03,0x3c,0x7b,0xb0,0x02,0xfc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x80,
+0x8f,0xa4,0x00,0x90,0x8f,0xa5,0x00,0x38,0x8f,0xa6,0x00,0x34,0xaf,0xa0,0x00,0x10,
+0x0c,0x00,0x0d,0xfe,0xaf,0xa0,0x00,0x14,0x08,0x00,0x21,0x94,0x00,0x00,0x00,0x00,
+0x8f,0xa4,0x00,0x44,0x8f,0xa3,0x00,0x24,0x8f,0xa5,0x00,0x2c,0x30,0x82,0x00,0x03,
+0xa3,0xc3,0x00,0x12,0x00,0x02,0x10,0x23,0x8f,0xa4,0x00,0x80,0x30,0x42,0x00,0x03,
+0x00,0xa2,0x10,0x23,0xa7,0xc2,0x00,0x1a,0x84,0x83,0x00,0x0c,0x00,0x00,0x00,0x00,
+0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x80,0x27,0x83,0x96,0x44,
+0x00,0x43,0x10,0x21,0x8c,0x44,0x00,0x18,0x00,0x00,0x00,0x00,0x8c,0x83,0x00,0x04,
+0x00,0x00,0x00,0x00,0x30,0x63,0x00,0x10,0x14,0x60,0x00,0x18,0x00,0x00,0x00,0x00,
+0x8f,0xa5,0x00,0x50,0x8f,0xa2,0x00,0x1c,0x00,0x00,0x00,0x00,0x00,0xa2,0x18,0x21,
+0x00,0x03,0x18,0x80,0x27,0x82,0x96,0x58,0x00,0x62,0x18,0x21,0x90,0x65,0x00,0x00,
+0x27,0x83,0xba,0xe0,0x00,0x05,0x11,0x00,0x00,0x45,0x10,0x23,0x00,0x02,0x10,0x80,
+0x00,0x45,0x10,0x23,0x00,0x02,0x30,0x80,0x00,0xc3,0x38,0x21,0x90,0xe4,0x00,0x00,
+0x24,0x02,0x00,0x1b,0x10,0x82,0x00,0x0e,0x00,0x00,0x00,0x00,0x8f,0xa2,0x00,0x24,
+0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x04,0x00,0xa0,0x20,0x21,0x8f,0xa2,0x00,0x24,
+0x08,0x00,0x21,0x99,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x21,0x00,0x00,0x28,0x21,
+0x0c,0x00,0x25,0xc4,0x00,0x00,0x38,0x21,0x08,0x00,0x21,0xd7,0x00,0x00,0x00,0x00,
+0x27,0x82,0xbb,0xc0,0x00,0xc2,0x20,0x21,0x94,0x83,0x00,0x00,0x24,0x02,0x00,0x05,
+0x10,0x43,0x00,0x25,0x24,0x62,0x00,0x01,0xa4,0x82,0x00,0x00,0x8f,0xa3,0x00,0x24,
+0x8f,0xa4,0x00,0x28,0x00,0x00,0x00,0x00,0x10,0x64,0xff,0xec,0x00,0x00,0x00,0x00,
+0x10,0x60,0xff,0xea,0x00,0x00,0x00,0x00,0x27,0x82,0xbb,0xb8,0x00,0xc2,0x20,0x21,
+0x90,0x83,0x00,0x06,0x00,0x00,0x00,0x00,0x2c,0x62,0x00,0x02,0x10,0x40,0x00,0x03,
+0x24,0x62,0x00,0x01,0xa0,0x82,0x00,0x06,0x00,0x40,0x18,0x21,0x30,0x63,0x00,0xff,
+0x24,0x02,0x00,0x02,0x10,0x62,0x00,0x09,0x00,0x00,0x00,0x00,0x27,0x84,0xba,0xe4,
+0x00,0xc4,0x18,0x21,0x8c,0x62,0x00,0x58,0x00,0x00,0x00,0x00,0x00,0x02,0x10,0x23,
+0x24,0x42,0xff,0xc0,0x08,0x00,0x21,0xd7,0xac,0xe2,0x00,0xd0,0x3c,0x02,0xb0,0x03,
+0x34,0x42,0x01,0x08,0x8c,0x43,0x00,0x00,0x27,0x84,0xba,0xe4,0x00,0xc4,0x10,0x21,
+0x08,0x00,0x21,0xfc,0xac,0x43,0x00,0xe0,0x27,0x83,0xbb,0xb8,0x00,0xc3,0x18,0x21,
+0x90,0x62,0x00,0x06,0x00,0x00,0x00,0x00,0x2c,0x42,0x00,0x02,0x10,0x40,0xff,0xc7,
+0xa4,0x80,0x00,0x00,0x08,0x00,0x21,0xd7,0xa0,0x60,0x00,0x06,0x8f,0xa5,0x00,0x48,
+0x8f,0xa6,0x00,0x4c,0x03,0xc0,0x20,0x21,0x0c,0x00,0x20,0x4f,0xaf,0xb7,0x00,0x10,
+0x08,0x00,0x21,0x76,0x00,0x00,0x00,0x00,0x00,0x05,0x28,0x80,0x27,0x82,0x96,0x40,
+0x00,0xa2,0x28,0x21,0x00,0x00,0x20,0x21,0x0c,0x00,0x01,0x49,0x00,0x00,0x00,0x00,
+0x08,0x00,0x21,0x6e,0x26,0xe2,0x00,0x01,0x00,0x02,0x80,0x80,0x27,0x83,0x96,0x50,
+0x02,0x03,0x18,0x21,0x26,0x31,0x00,0x01,0x03,0xc0,0x20,0x21,0x02,0x40,0x28,0x21,
+0x0c,0x00,0x23,0x1c,0xa0,0x71,0x00,0x05,0x14,0x40,0xff,0x45,0x00,0x00,0x00,0x00,
+0x16,0xe0,0x00,0x4b,0x02,0xc0,0x38,0x21,0x8f,0xa5,0x00,0x24,0x8f,0xb6,0x00,0x18,
+0x8f,0xa3,0x00,0x20,0x24,0xa5,0x00,0x01,0x24,0x02,0x00,0x01,0xaf,0xb2,0x00,0x48,
+0xaf,0xb6,0x00,0x4c,0x10,0x62,0x00,0x40,0xaf,0xa5,0x00,0x24,0x27,0x82,0x96,0x40,
+0x02,0x02,0x10,0x21,0x94,0x42,0x00,0x06,0x8f,0xa5,0x00,0x30,0xaf,0xa0,0x00,0x20,
+0xaf,0xa2,0x00,0x44,0x8f,0xa4,0x00,0x44,0x30,0x42,0x00,0x03,0x00,0x02,0x10,0x23,
+0x30,0x42,0x00,0x03,0x00,0x82,0x10,0x21,0x24,0x42,0x00,0x04,0x30,0x42,0xff,0xff,
+0x00,0x45,0x18,0x2b,0x10,0x60,0x00,0x29,0x00,0x00,0x00,0x00,0x8f,0xa4,0x00,0x2c,
+0x00,0xa2,0x10,0x23,0x00,0x85,0x18,0x21,0x30,0x63,0xff,0xff,0x30,0x45,0xff,0xff,
+0xaf,0xa3,0x00,0x2c,0x02,0x92,0x30,0x21,0x00,0x06,0x30,0x80,0x27,0x82,0x96,0x44,
+0x00,0xc2,0x10,0x21,0x8c,0x47,0x00,0x18,0x3c,0x04,0x80,0xff,0x34,0x84,0xff,0xff,
+0x8c,0xe3,0x00,0x04,0x3c,0x02,0x7f,0x00,0x00,0x05,0x2d,0x40,0x00,0xa2,0x28,0x24,
+0x00,0x64,0x18,0x24,0x00,0x65,0x18,0x25,0xac,0xe3,0x00,0x04,0x8f,0xa3,0x00,0x90,
+0x27,0x82,0x96,0x50,0x00,0xc2,0x10,0x21,0xa0,0x43,0x00,0x00,0x8c,0xe4,0x00,0x08,
+0x00,0x00,0x00,0x00,0x00,0x04,0x27,0xc2,0x10,0x80,0xff,0x0d,0xaf,0xa4,0x00,0x3c,
+0x80,0x42,0x00,0x06,0x8f,0xa4,0x00,0x40,0x24,0x42,0x00,0x02,0x00,0x02,0x1f,0xc2,
+0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x43,0x00,0x02,0x10,0x40,0x00,0xe2,0x38,0x21,
+0xa4,0xe4,0x00,0x00,0x08,0x00,0x21,0x71,0x26,0xb5,0xff,0xff,0x8f,0xa5,0x00,0x2c,
+0x00,0x00,0x00,0x00,0x00,0xa2,0x10,0x21,0x30,0x42,0xff,0xff,0xaf,0xa2,0x00,0x2c,
+0x08,0x00,0x22,0x4d,0x00,0x00,0x28,0x21,0x08,0x00,0x22,0x37,0xa7,0xd2,0x00,0x14,
+0x8f,0xa5,0x00,0x48,0x8f,0xa6,0x00,0x4c,0x03,0xc0,0x20,0x21,0x0c,0x00,0x20,0x4f,
+0xaf,0xb7,0x00,0x10,0x08,0x00,0x22,0x2e,0x00,0x00,0xb8,0x21,0x02,0x40,0x20,0x21,
+0x0c,0x00,0x17,0x43,0x00,0x00,0x28,0x21,0x00,0x40,0x18,0x21,0x94,0x42,0x00,0x00,
+0x00,0x00,0x00,0x00,0x34,0x42,0x08,0x00,0xa4,0x62,0x00,0x00,0x08,0x00,0x21,0x65,
+0x02,0x71,0x10,0x21,0x02,0x92,0x18,0x21,0x00,0x03,0x80,0x80,0x27,0x82,0x96,0x44,
+0x02,0x02,0x10,0x21,0x8c,0x44,0x00,0x18,0x00,0x00,0x00,0x00,0x8c,0x83,0x00,0x04,
+0x00,0x00,0x00,0x00,0x30,0x63,0x00,0x10,0x10,0x60,0x00,0x0a,0x24,0x06,0x00,0x01,
+0x93,0x82,0x91,0x51,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x01,0x10,0x40,0xfe,0xd5,
+0x00,0x00,0x00,0x00,0x27,0x85,0x96,0x40,0x02,0x05,0x28,0x21,0x08,0x00,0x22,0x1e,
+0x3c,0x04,0x00,0x80,0x27,0x83,0x96,0x58,0x27,0x82,0x96,0x50,0x02,0x03,0x18,0x21,
+0x02,0x02,0x10,0x21,0x90,0x64,0x00,0x00,0x90,0x45,0x00,0x05,0x0c,0x00,0x25,0xc4,
+0x00,0x00,0x38,0x21,0x08,0x00,0x22,0x94,0x00,0x00,0x00,0x00,0x27,0x82,0x96,0x58,
+0x02,0x02,0x10,0x21,0x94,0x43,0x00,0x02,0x8f,0xa2,0x00,0x54,0x00,0x03,0x19,0x02,
+0x00,0x62,0x18,0x23,0x30,0x63,0x0f,0xff,0x28,0x62,0x00,0x20,0x10,0x40,0x00,0x06,
+0x28,0x62,0x00,0x40,0x8f,0xa4,0x00,0x88,0x00,0x00,0x00,0x00,0x00,0x64,0x10,0x06,
+0x08,0x00,0x21,0x4c,0x30,0x44,0x00,0x01,0x10,0x40,0x00,0x04,0x00,0x00,0x00,0x00,
+0x8f,0xa5,0x00,0x8c,0x08,0x00,0x22,0xb4,0x00,0x65,0x10,0x06,0x08,0x00,0x21,0x4c,
+0x00,0x00,0x20,0x21,0x8f,0xa4,0x00,0x90,0x8f,0xa5,0x00,0x38,0x8f,0xa6,0x00,0x34,
+0xaf,0xa0,0x00,0x10,0x0c,0x00,0x0d,0xfe,0xaf,0xa2,0x00,0x14,0x30,0x42,0xff,0xff,
+0x08,0x00,0x21,0x1c,0xaf,0xa2,0x00,0x40,0x3c,0x02,0xb0,0x03,0x3c,0x03,0x80,0x01,
+0x27,0xbd,0xff,0xe0,0x34,0x42,0x00,0x20,0x24,0x63,0x8b,0x18,0xaf,0xb1,0x00,0x14,
+0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x18,0xac,0x43,0x00,0x00,0x90,0x82,0x00,0x0a,
+0x00,0x80,0x80,0x21,0x14,0x40,0x00,0x45,0x00,0x00,0x88,0x21,0x92,0x02,0x00,0x04,
+0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x3c,0x00,0x00,0x00,0x00,0x12,0x20,0x00,0x18,
+0x00,0x00,0x00,0x00,0x92,0x02,0x00,0x16,0x92,0x05,0x00,0x0a,0x30,0x42,0x00,0xfc,
+0x10,0xa0,0x00,0x03,0xa2,0x02,0x00,0x16,0x34,0x42,0x00,0x01,0xa2,0x02,0x00,0x16,
+0x92,0x04,0x00,0x04,0x00,0x00,0x00,0x00,0x30,0x83,0x00,0xff,0x10,0x60,0x00,0x05,
+0x00,0x00,0x00,0x00,0x92,0x02,0x00,0x16,0x00,0x00,0x00,0x00,0x34,0x42,0x00,0x02,
+0xa2,0x02,0x00,0x16,0x10,0x60,0x00,0x0a,0x00,0x00,0x00,0x00,0x14,0xa0,0x00,0x08,
+0x00,0x00,0x00,0x00,0x96,0x02,0x00,0x00,0xa2,0x00,0x00,0x17,0xa6,0x02,0x00,0x14,
+0x8f,0xbf,0x00,0x18,0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x20,
+0x14,0x80,0x00,0x05,0x24,0x02,0x00,0x01,0x96,0x03,0x00,0x06,0xa2,0x02,0x00,0x17,
+0x08,0x00,0x22,0xf0,0xa6,0x03,0x00,0x14,0x96,0x04,0x00,0x00,0x96,0x05,0x00,0x06,
+0x27,0x86,0x96,0x40,0x00,0x04,0x10,0xc0,0x00,0x05,0x18,0xc0,0x00,0x44,0x10,0x21,
+0x00,0x65,0x18,0x21,0x00,0x02,0x10,0x80,0x00,0x03,0x18,0x80,0x00,0x66,0x18,0x21,
+0x00,0x46,0x10,0x21,0x8c,0x65,0x00,0x08,0x8c,0x44,0x00,0x08,0x0c,0x00,0x17,0x34,
+0x00,0x00,0x00,0x00,0x30,0x43,0x00,0xff,0x10,0x60,0x00,0x04,0xa2,0x02,0x00,0x17,
+0x96,0x02,0x00,0x06,0x08,0x00,0x22,0xf0,0xa6,0x02,0x00,0x14,0x96,0x02,0x00,0x00,
+0x08,0x00,0x22,0xf0,0xa6,0x02,0x00,0x14,0x96,0x05,0x00,0x00,0x0c,0x00,0x23,0x1c,
+0x02,0x00,0x20,0x21,0x08,0x00,0x22,0xd7,0x02,0x22,0x88,0x21,0x94,0x85,0x00,0x06,
+0x0c,0x00,0x23,0x1c,0x00,0x00,0x00,0x00,0x08,0x00,0x22,0xd3,0x00,0x40,0x88,0x21,
+0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x01,0x34,0x63,0x00,0x20,0x24,0x42,0x8c,0x70,
+0x27,0xbd,0xff,0xf0,0xac,0x62,0x00,0x00,0x00,0x00,0x10,0x21,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x10,0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x01,0x34,0x63,0x00,0x20,
+0x24,0x42,0x8c,0x94,0xac,0x62,0x00,0x00,0x90,0x89,0x00,0x0a,0x00,0x80,0x30,0x21,
+0x11,0x20,0x00,0x05,0x00,0xa0,0x50,0x21,0x90,0x82,0x00,0x17,0x00,0x00,0x00,0x00,
+0x14,0x40,0x00,0x1b,0x00,0x00,0x00,0x00,0x90,0xc7,0x00,0x04,0x00,0x00,0x00,0x00,
+0x10,0xe0,0x00,0x1b,0x00,0x00,0x00,0x00,0x94,0xc8,0x00,0x00,0x27,0x83,0x96,0x40,
+0x93,0x85,0x91,0x50,0x00,0x08,0x10,0xc0,0x00,0x48,0x10,0x21,0x00,0x02,0x10,0x80,
+0x00,0x43,0x10,0x21,0x8c,0x44,0x00,0x08,0x00,0xe5,0x28,0x2b,0x10,0xa0,0x00,0x06,
+0x01,0x44,0x18,0x23,0x8f,0x82,0x91,0x68,0x00,0x00,0x00,0x00,0x00,0x43,0x10,0x2b,
+0x10,0x40,0x00,0x05,0x00,0x00,0x00,0x00,0x24,0x03,0x00,0x10,0xa4,0xc8,0x00,0x14,
+0x03,0xe0,0x00,0x08,0x00,0x60,0x10,0x21,0x11,0x20,0x00,0x05,0x00,0x00,0x00,0x00,
+0x94,0xc2,0x00,0x06,0x24,0x03,0x00,0x08,0x08,0x00,0x23,0x48,0xa4,0xc2,0x00,0x14,
+0x08,0x00,0x23,0x48,0x00,0x00,0x18,0x21,0x27,0xbd,0xff,0xc8,0xaf,0xb5,0x00,0x2c,
+0xaf,0xb4,0x00,0x28,0xaf,0xb3,0x00,0x24,0xaf,0xb0,0x00,0x18,0xaf,0xbf,0x00,0x30,
+0xaf,0xb2,0x00,0x20,0xaf,0xb1,0x00,0x1c,0x94,0x91,0x00,0x06,0x00,0x80,0xa0,0x21,
+0x3c,0x02,0x80,0x01,0x3c,0x04,0xb0,0x03,0x00,0x11,0xa8,0xc0,0x34,0x84,0x00,0x20,
+0x24,0x42,0x8d,0x48,0x02,0xb1,0x48,0x21,0xac,0x82,0x00,0x00,0x00,0x09,0x48,0x80,
+0x24,0x03,0x00,0x01,0x27,0x82,0x96,0x50,0xa2,0x83,0x00,0x12,0x01,0x22,0x10,0x21,
+0x27,0x84,0x96,0x44,0x01,0x24,0x20,0x21,0x80,0x48,0x00,0x06,0x8c,0x8a,0x00,0x18,
+0x27,0x83,0x96,0x60,0x01,0x23,0x48,0x21,0x8d,0x24,0x00,0x00,0x25,0x08,0x00,0x02,
+0x8d,0x42,0x00,0x00,0x8d,0x49,0x00,0x04,0x00,0x08,0x17,0xc2,0x8d,0x43,0x00,0x08,
+0x01,0x02,0x40,0x21,0x00,0x04,0x25,0xc2,0x00,0x08,0x40,0x43,0x30,0x84,0x00,0x01,
+0x00,0x03,0x1f,0xc2,0x00,0x08,0x40,0x40,0x00,0xe0,0x80,0x21,0x00,0x64,0x18,0x24,
+0x00,0x09,0x49,0x42,0x01,0x48,0x10,0x21,0x00,0xa0,0x98,0x21,0x00,0xa0,0x20,0x21,
+0x00,0x40,0x38,0x21,0x02,0x00,0x28,0x21,0x14,0x60,0x00,0x19,0x31,0x29,0x00,0x01,
+0x94,0x42,0x00,0x00,0x02,0xb1,0x88,0x21,0x02,0x00,0x28,0x21,0x00,0x11,0x88,0x80,
+0x27,0x90,0x96,0x40,0x02,0x30,0x80,0x21,0x96,0x03,0x00,0x06,0x30,0x52,0xff,0xff,
+0x02,0x60,0x20,0x21,0x00,0x60,0x30,0x21,0xa6,0x83,0x00,0x1a,0x27,0x82,0x96,0x48,
+0x0c,0x00,0x0d,0xd7,0x02,0x22,0x88,0x21,0x00,0x52,0x10,0x21,0x96,0x03,0x00,0x06,
+0xa6,0x22,0x00,0x04,0x8f,0xbf,0x00,0x30,0x7b,0xb4,0x01,0x7c,0x7b,0xb2,0x01,0x3c,
+0x7b,0xb0,0x00,0xfc,0x00,0x60,0x10,0x21,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x38,
+0xaf,0xa9,0x00,0x10,0x0c,0x00,0x0d,0xfe,0xaf,0xa0,0x00,0x14,0x08,0x00,0x23,0x86,
+0x02,0xb1,0x88,0x21,0x27,0xbd,0xff,0xc0,0xaf,0xbe,0x00,0x38,0xaf,0xb7,0x00,0x34,
+0xaf,0xb6,0x00,0x30,0xaf,0xb5,0x00,0x2c,0xaf,0xb3,0x00,0x24,0xaf,0xb1,0x00,0x1c,
+0xaf,0xbf,0x00,0x3c,0xaf,0xb4,0x00,0x28,0xaf,0xb2,0x00,0x20,0xaf,0xb0,0x00,0x18,
+0x94,0x90,0x00,0x00,0x3c,0x08,0xb0,0x03,0x35,0x08,0x00,0x20,0x00,0x10,0x10,0xc0,
+0x00,0x50,0x18,0x21,0x00,0x40,0x88,0x21,0x3c,0x02,0x80,0x01,0x00,0x03,0x48,0x80,
+0x24,0x42,0x8e,0x84,0x00,0x80,0x98,0x21,0x27,0x84,0x96,0x50,0x01,0x24,0x20,0x21,
+0x93,0xb7,0x00,0x53,0xad,0x02,0x00,0x00,0x80,0x83,0x00,0x06,0x27,0x82,0x96,0x44,
+0x01,0x22,0x10,0x21,0x8c,0x44,0x00,0x18,0x24,0x63,0x00,0x02,0x00,0x03,0x17,0xc2,
+0x8c,0x88,0x00,0x08,0x00,0x62,0x18,0x21,0x00,0x03,0x18,0x43,0x00,0x03,0x18,0x40,
+0xaf,0xa7,0x00,0x4c,0x2c,0xa2,0x00,0x10,0x00,0xa0,0xa8,0x21,0x00,0x83,0x50,0x21,
+0x00,0x08,0x47,0xc2,0x00,0xc0,0x58,0x21,0x00,0x00,0xb0,0x21,0x8c,0x92,0x00,0x0c,
+0x14,0x40,0x00,0x13,0x00,0x00,0xf0,0x21,0x92,0x67,0x00,0x04,0x24,0x14,0x00,0x01,
+0x12,0x87,0x00,0x10,0x02,0x30,0x10,0x21,0x27,0x83,0x96,0x58,0x01,0x23,0x18,0x21,
+0x80,0x64,0x00,0x00,0x27,0x83,0xbb,0xb0,0x00,0x04,0x11,0x00,0x00,0x44,0x10,0x23,
+0x00,0x02,0x10,0x80,0x00,0x44,0x10,0x23,0x00,0x02,0x10,0x80,0x00,0x43,0x10,0x21,
+0x90,0x44,0x00,0x04,0x00,0x00,0x00,0x00,0x10,0x80,0x00,0x23,0x00,0x00,0x00,0x00,
+0x02,0x30,0x10,0x21,0x00,0x02,0x80,0x80,0x24,0x04,0x00,0x01,0x27,0x83,0x96,0x60,
+0xa2,0x64,0x00,0x12,0x02,0x03,0x18,0x21,0x8c,0x62,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x02,0x15,0xc2,0x30,0x42,0x00,0x01,0x01,0x02,0x10,0x24,0x14,0x40,0x00,0x0e,
+0x02,0xa0,0x20,0x21,0x27,0x82,0x96,0x40,0x02,0x02,0x10,0x21,0x94,0x43,0x00,0x06,
+0x00,0x00,0x00,0x00,0xa6,0x63,0x00,0x1a,0x94,0x42,0x00,0x06,0x7b,0xbe,0x01,0xfc,
+0x7b,0xb6,0x01,0xbc,0x7b,0xb4,0x01,0x7c,0x7b,0xb2,0x01,0x3c,0x7b,0xb0,0x00,0xfc,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x40,0x8f,0xa5,0x00,0x4c,0x01,0x60,0x30,0x21,
+0x01,0x40,0x38,0x21,0xaf,0xa0,0x00,0x10,0x0c,0x00,0x0d,0xfe,0xaf,0xa0,0x00,0x14,
+0x08,0x00,0x23,0xed,0x00,0x00,0x00,0x00,0x27,0x83,0x96,0x60,0x01,0x23,0x18,0x21,
+0x8c,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x15,0xc2,0x30,0x42,0x00,0x01,
+0x01,0x02,0x10,0x24,0x14,0x40,0x00,0xaf,0x00,0xa0,0x20,0x21,0x32,0x4f,0x00,0x03,
+0x00,0x12,0x10,0x82,0x25,0xe3,0x00,0x0d,0x30,0x45,0x00,0x07,0x00,0x74,0x78,0x04,
+0x10,0xa0,0x00,0x0e,0x00,0x00,0x90,0x21,0x27,0x82,0x86,0xb0,0x00,0x15,0x18,0x40,
+0x00,0x62,0x18,0x21,0x94,0x64,0x00,0x00,0x24,0xa2,0x00,0x06,0x00,0x54,0x10,0x04,
+0x00,0x44,0x00,0x1a,0x14,0x80,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x07,0x00,0x0d,
+0x00,0x00,0x10,0x12,0x24,0x42,0x00,0x20,0x30,0x52,0xff,0xfc,0x02,0x30,0x10,0x21,
+0x27,0x83,0x96,0x50,0x00,0x02,0x10,0x80,0x00,0x43,0x10,0x21,0x90,0x44,0x00,0x03,
+0x00,0x00,0x00,0x00,0x30,0x83,0x00,0xff,0x2c,0x62,0x00,0x0c,0x14,0x40,0x00,0x04,
+0x2c,0x62,0x00,0x19,0x30,0x82,0x00,0x0f,0x24,0x43,0x00,0x0c,0x2c,0x62,0x00,0x19,
+0x10,0x40,0x00,0x19,0x24,0x0e,0x00,0x20,0x24,0x62,0xff,0xe9,0x2c,0x42,0x00,0x02,
+0x14,0x40,0x00,0x15,0x24,0x0e,0x00,0x08,0x24,0x62,0xff,0xeb,0x2c,0x42,0x00,0x02,
+0x14,0x40,0x00,0x11,0x24,0x0e,0x00,0x04,0x24,0x02,0x00,0x14,0x10,0x62,0x00,0x0e,
+0x24,0x0e,0x00,0x02,0x24,0x62,0xff,0xef,0x2c,0x42,0x00,0x03,0x14,0x40,0x00,0x0a,
+0x24,0x0e,0x00,0x10,0x24,0x62,0xff,0xf1,0x2c,0x42,0x00,0x02,0x14,0x40,0x00,0x06,
+0x24,0x0e,0x00,0x04,0x24,0x62,0xff,0xf3,0x2c,0x42,0x00,0x02,0x24,0x0e,0x00,0x02,
+0x24,0x03,0x00,0x01,0x00,0x62,0x70,0x0a,0x30,0xe2,0x00,0xff,0x00,0x00,0x48,0x21,
+0x00,0x00,0x68,0x21,0x10,0x40,0x00,0x6d,0x00,0x00,0x58,0x21,0x3c,0x14,0x80,0xff,
+0x27,0x99,0x96,0x40,0x01,0xf2,0xc0,0x23,0x36,0x94,0xff,0xff,0x01,0xc9,0x10,0x2a,
+0x14,0x40,0x00,0x64,0x24,0x03,0x00,0x04,0x00,0x10,0x28,0xc0,0x00,0xb0,0x10,0x21,
+0x00,0x02,0x10,0x80,0x00,0x59,0x10,0x21,0x94,0x56,0x00,0x06,0x00,0x00,0x00,0x00,
+0x32,0xcc,0x00,0x03,0x00,0x6c,0x10,0x23,0x30,0x42,0x00,0x03,0x02,0xc2,0x10,0x21,
+0x24,0x42,0x00,0x04,0x30,0x51,0xff,0xff,0x02,0x32,0x18,0x2b,0x10,0x60,0x00,0x4d,
+0x01,0xf1,0x10,0x23,0x02,0x51,0x10,0x23,0x01,0x78,0x18,0x2b,0x10,0x60,0x00,0x34,
+0x30,0x44,0xff,0xff,0x29,0x22,0x00,0x40,0x10,0x40,0x00,0x31,0x01,0x72,0x18,0x21,
+0x25,0x22,0x00,0x01,0x00,0x02,0x16,0x00,0x00,0x02,0x4e,0x03,0x00,0xb0,0x10,0x21,
+0x00,0x02,0x30,0x80,0x27,0x82,0x96,0x44,0x30,0x6b,0xff,0xff,0x00,0xc2,0x18,0x21,
+0x8c,0x67,0x00,0x18,0x00,0x04,0x25,0x40,0x3c,0x03,0x7f,0x00,0x8c,0xe2,0x00,0x04,
+0x00,0x83,0x20,0x24,0x27,0x83,0x96,0x50,0x00,0x54,0x10,0x24,0x00,0xc3,0x28,0x21,
+0x00,0x44,0x10,0x25,0xac,0xe2,0x00,0x04,0x16,0xe0,0x00,0x02,0xa0,0xb5,0x00,0x00,
+0xa0,0xb5,0x00,0x03,0x27,0x84,0x96,0x60,0x00,0xc4,0x18,0x21,0x8c,0x62,0x00,0x00,
+0x8c,0xe8,0x00,0x08,0x00,0x02,0x15,0xc2,0x00,0x08,0x47,0xc2,0x30,0x42,0x00,0x01,
+0x01,0x02,0x10,0x24,0x10,0x40,0x00,0x0a,0x00,0x00,0x00,0x00,0x80,0xa2,0x00,0x06,
+0x00,0x00,0x00,0x00,0x24,0x42,0x00,0x02,0x00,0x02,0x1f,0xc2,0x00,0x43,0x10,0x21,
+0x00,0x02,0x10,0x43,0x00,0x02,0x10,0x40,0x00,0xe2,0x50,0x21,0xa5,0x5e,0x00,0x00,
+0x92,0x62,0x00,0x04,0x25,0xad,0x00,0x01,0x27,0x84,0x96,0x40,0x00,0xc4,0x18,0x21,
+0x01,0xa2,0x10,0x2a,0x94,0x70,0x00,0x02,0x14,0x40,0xff,0xb8,0x00,0x00,0x00,0x00,
+0x96,0x63,0x00,0x14,0x00,0x0c,0x10,0x23,0xa2,0x69,0x00,0x12,0x30,0x42,0x00,0x03,
+0x01,0x62,0x10,0x23,0x00,0x03,0x80,0xc0,0x8f,0xa5,0x00,0x4c,0x30,0x4b,0xff,0xff,
+0x02,0x03,0x80,0x21,0x27,0x82,0x96,0x48,0x00,0x10,0x80,0x80,0xa6,0x6b,0x00,0x1a,
+0x02,0xa0,0x20,0x21,0x01,0x60,0x30,0x21,0x01,0x60,0x88,0x21,0x0c,0x00,0x0d,0xd7,
+0x02,0x02,0x80,0x21,0x00,0x5e,0x10,0x21,0xa6,0x02,0x00,0x04,0x08,0x00,0x23,0xf3,
+0x02,0x20,0x10,0x21,0x01,0x62,0x10,0x2b,0x10,0x40,0xff,0xe9,0x00,0x00,0x20,0x21,
+0x29,0x22,0x00,0x40,0x10,0x40,0xff,0xe6,0x01,0x71,0x18,0x21,0x08,0x00,0x24,0x69,
+0x25,0x22,0x00,0x01,0x08,0x00,0x24,0x98,0x32,0xcc,0x00,0x03,0x08,0x00,0x24,0x98,
+0x00,0x00,0x60,0x21,0x8f,0xa5,0x00,0x4c,0x01,0x40,0x38,0x21,0xaf,0xa0,0x00,0x10,
+0x0c,0x00,0x0d,0xfe,0xaf,0xb4,0x00,0x14,0x92,0x67,0x00,0x04,0x08,0x00,0x24,0x0b,
+0x30,0x5e,0xff,0xff,0x30,0x84,0xff,0xff,0x00,0x04,0x30,0xc0,0x00,0xc4,0x20,0x21,
+0x00,0x04,0x20,0x80,0x27,0x82,0x96,0x40,0x3c,0x03,0xb0,0x08,0x30,0xa5,0xff,0xff,
+0x00,0x82,0x20,0x21,0x00,0xc3,0x30,0x21,0xac,0xc5,0x00,0x00,0x03,0xe0,0x00,0x08,
+0xa4,0x85,0x00,0x00,0x30,0x84,0xff,0xff,0x00,0x04,0x30,0xc0,0x00,0xc4,0x30,0x21,
+0x27,0x88,0x96,0x40,0x00,0x06,0x30,0x80,0x00,0xc8,0x30,0x21,0x94,0xc3,0x00,0x04,
+0x3c,0x02,0xb0,0x08,0x3c,0x07,0xb0,0x03,0x00,0x03,0x20,0xc0,0x00,0x83,0x18,0x21,
+0x00,0x03,0x18,0x80,0x00,0x82,0x20,0x21,0x3c,0x02,0x80,0x01,0x30,0xa5,0xff,0xff,
+0x00,0x68,0x18,0x21,0x34,0xe7,0x00,0x20,0x24,0x42,0x93,0x34,0xac,0xe2,0x00,0x00,
+0xa4,0xc5,0x00,0x02,0xa4,0x65,0x00,0x00,0x03,0xe0,0x00,0x08,0xac,0x85,0x00,0x00,
+0x30,0x84,0xff,0xff,0x00,0x04,0x10,0xc0,0x00,0x44,0x10,0x21,0x27,0x89,0x96,0x40,
+0x00,0x02,0x10,0x80,0x00,0x49,0x10,0x21,0x97,0x83,0x96,0x30,0x94,0x4a,0x00,0x04,
+0x3c,0x02,0xb0,0x08,0x00,0x03,0x38,0xc0,0x00,0x0a,0x40,0xc0,0x00,0xe3,0x18,0x21,
+0x01,0x0a,0x28,0x21,0x00,0xe2,0x38,0x21,0x01,0x02,0x40,0x21,0x00,0x03,0x18,0x80,
+0x00,0x05,0x28,0x80,0x3c,0x06,0xb0,0x03,0x3c,0x02,0x80,0x01,0x00,0xa9,0x28,0x21,
+0x00,0x69,0x18,0x21,0x34,0xc6,0x00,0x20,0x34,0x09,0xff,0xff,0x24,0x42,0x93,0x90,
+0xac,0xc2,0x00,0x00,0xa4,0x64,0x00,0x00,0xac,0xe4,0x00,0x00,0xa4,0xa9,0x00,0x00,
+0xad,0x09,0x00,0x00,0xa7,0x8a,0x96,0x30,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,
+0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x01,0x34,0x63,0x00,0x20,0x24,0x42,0x94,0x10,
+0x3c,0x04,0xb0,0x03,0xac,0x62,0x00,0x00,0x34,0x84,0x01,0x10,0x8c,0x82,0x00,0x00,
+0x97,0x83,0x87,0xf4,0x30,0x42,0xff,0xff,0x10,0x62,0x00,0x16,0x24,0x0a,0x00,0x01,
+0xa7,0x82,0x87,0xf4,0xaf,0x80,0xba,0x90,0x00,0x40,0x28,0x21,0x24,0x06,0x00,0x01,
+0x27,0x84,0xba,0x94,0x25,0x43,0xff,0xff,0x00,0x66,0x10,0x04,0x00,0xa2,0x10,0x24,
+0x14,0x40,0x00,0x07,0x00,0x00,0x00,0x00,0x8c,0x83,0xff,0xfc,0x00,0x00,0x00,0x00,
+0x00,0x66,0x10,0x04,0x00,0xa2,0x10,0x24,0x38,0x42,0x00,0x00,0x01,0x42,0x18,0x0a,
+0x25,0x4a,0x00,0x01,0x2d,0x42,0x00,0x14,0xac,0x83,0x00,0x00,0x14,0x40,0xff,0xf1,
+0x24,0x84,0x00,0x04,0x3c,0x0b,0xb0,0x03,0x00,0x00,0x50,0x21,0x3c,0x0c,0x80,0x00,
+0x27,0x89,0xba,0xe0,0x35,0x6b,0x01,0x20,0x8d,0x68,0x00,0x00,0x8d,0x23,0x00,0x04,
+0x01,0x0c,0x10,0x24,0x00,0x02,0x17,0xc2,0x11,0x03,0x00,0x37,0xa1,0x22,0x00,0xdc,
+0xa1,0x20,0x00,0xd5,0xa1,0x20,0x00,0xd6,0x01,0x20,0x30,0x21,0x00,0x00,0x38,0x21,
+0x00,0x00,0x28,0x21,0x01,0x20,0x20,0x21,0x00,0xa8,0x10,0x06,0x30,0x42,0x00,0x01,
+0x10,0xe0,0x00,0x10,0xa0,0x82,0x00,0x0a,0x90,0x82,0x00,0x07,0x00,0x00,0x00,0x00,
+0x10,0x40,0x00,0x31,0x24,0xa2,0xff,0xff,0xa0,0x82,0x00,0x08,0x90,0x82,0x00,0x0a,
+0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x09,0x00,0x00,0x00,0x00,0x90,0x83,0x00,0x08,
+0x00,0x00,0x00,0x00,0x00,0x03,0x10,0x40,0x00,0x43,0x10,0x21,0x00,0x46,0x10,0x21,
+0xa0,0x45,0x00,0x09,0x90,0x82,0x00,0x0a,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x07,
+0x00,0x00,0x00,0x00,0x14,0xe0,0x00,0x04,0x00,0x00,0x00,0x00,0xa0,0xc5,0x00,0xd5,
+0x24,0x07,0x00,0x01,0xa0,0x85,0x00,0x08,0xa0,0xc5,0x00,0xd6,0x24,0xa5,0x00,0x01,
+0x2c,0xa2,0x00,0x1c,0x14,0x40,0xff,0xe0,0x24,0x84,0x00,0x03,0x90,0xc4,0x00,0xd5,
+0x00,0x00,0x28,0x21,0x00,0xa4,0x10,0x2b,0x10,0x40,0x00,0x0b,0x00,0x00,0x00,0x00,
+0x00,0xc0,0x18,0x21,0xa0,0x64,0x00,0x08,0x90,0xc2,0x00,0xd5,0x24,0xa5,0x00,0x01,
+0xa0,0x62,0x00,0x09,0x90,0xc4,0x00,0xd5,0x00,0x00,0x00,0x00,0x00,0xa4,0x10,0x2b,
+0x14,0x40,0xff,0xf8,0x24,0x63,0x00,0x03,0x25,0x4a,0x00,0x01,0x2d,0x42,0x00,0x08,
+0xad,0x28,0x00,0x04,0x25,0x6b,0x00,0x04,0x14,0x40,0xff,0xbf,0x25,0x29,0x00,0xec,
+0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x90,0x82,0x00,0x05,0x08,0x00,0x25,0x3f,
+0xa0,0x82,0x00,0x08,0x97,0x84,0x91,0x5a,0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x01,
+0x27,0xbd,0xff,0xe8,0x34,0x63,0x00,0x20,0x24,0x42,0x95,0xc4,0xaf,0xbf,0x00,0x10,
+0xac,0x62,0x00,0x00,0x00,0x04,0x20,0x42,0x00,0x00,0x40,0x21,0x27,0x8f,0xba,0xe4,
+0x00,0x00,0x50,0x21,0x00,0x00,0x58,0x21,0x27,0x98,0xbb,0xc4,0x27,0x99,0xbb,0xc0,
+0x27,0x8e,0xbb,0xbe,0x27,0x8c,0xba,0xe8,0x27,0x8d,0xbb,0x40,0x27,0x89,0xbb,0xb8,
+0x00,0x0a,0x18,0x80,0x01,0x6f,0x10,0x21,0xac,0x40,0x00,0x00,0xac,0x44,0x00,0x58,
+0x00,0x6e,0x28,0x21,0x00,0x78,0x10,0x21,0xa1,0x20,0xff,0xfc,0xad,0x20,0x00,0x00,
+0xa1,0x20,0x00,0x04,0xa1,0x20,0x00,0x05,0xad,0x20,0xff,0xf8,0x00,0x79,0x18,0x21,
+0x24,0x06,0x00,0x01,0x24,0xc6,0xff,0xff,0xa0,0xa0,0x00,0x00,0xa4,0x60,0x00,0x00,
+0xac,0x40,0x00,0x00,0x24,0x63,0x00,0x02,0x24,0x42,0x00,0x04,0x04,0xc1,0xff,0xf9,
+0x24,0xa5,0x00,0x01,0x00,0x0a,0x10,0x80,0x00,0x4d,0x28,0x21,0x00,0x00,0x30,0x21,
+0x00,0x4c,0x18,0x21,0x27,0x87,0x87,0xf8,0x8c,0xe2,0x00,0x00,0x24,0xe7,0x00,0x04,
+0xac,0xa2,0x00,0x00,0xa0,0x66,0x00,0x00,0xa0,0x66,0x00,0x01,0x24,0xc6,0x00,0x01,
+0x28,0xc2,0x00,0x1c,0xa0,0x60,0x00,0x02,0x24,0xa5,0x00,0x04,0x14,0x40,0xff,0xf6,
+0x24,0x63,0x00,0x03,0x25,0x08,0x00,0x01,0x29,0x02,0x00,0x08,0x25,0x4a,0x00,0x3b,
+0x25,0x29,0x00,0xec,0x14,0x40,0xff,0xd6,0x25,0x6b,0x00,0xec,0xa7,0x80,0x87,0xf4,
+0x00,0x00,0x40,0x21,0x27,0x83,0xba,0x90,0xac,0x68,0x00,0x00,0x25,0x08,0x00,0x01,
+0x29,0x02,0x00,0x0c,0x14,0x40,0xff,0xfc,0x24,0x63,0x00,0x04,0x0c,0x00,0x25,0x04,
+0x00,0x00,0x00,0x00,0x27,0x83,0xba,0xe0,0x24,0x08,0x00,0x07,0x90,0x62,0x00,0xd6,
+0x25,0x08,0xff,0xff,0xa0,0x62,0x00,0x00,0x05,0x01,0xff,0xfc,0x24,0x63,0x00,0xec,
+0x8f,0xbf,0x00,0x10,0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x18,
+0x30,0x84,0x00,0xff,0x00,0x04,0x11,0x00,0x00,0x44,0x10,0x23,0x00,0x02,0x10,0x80,
+0x00,0x44,0x10,0x23,0x00,0x02,0x10,0x80,0x27,0x83,0xba,0xe0,0x00,0x43,0x40,0x21,
+0x3c,0x04,0xb0,0x03,0x3c,0x02,0x80,0x01,0x34,0x84,0x00,0x20,0x24,0x42,0x97,0x10,
+0x30,0xc6,0x00,0xff,0xac,0x82,0x00,0x00,0x30,0xa5,0x00,0xff,0x30,0xe7,0x00,0xff,
+0x10,0xc0,0x00,0x41,0x25,0x0f,0x00,0xd0,0x91,0x03,0x00,0x00,0x00,0x00,0x00,0x00,
+0x24,0x62,0xff,0xee,0x2c,0x42,0x00,0x02,0x14,0x40,0x00,0x31,0x30,0x63,0x00,0xff,
+0x24,0x02,0x00,0x1a,0x10,0x62,0x00,0x2e,0x24,0x02,0x00,0x1b,0x10,0x62,0x00,0x2c,
+0x24,0x02,0x00,0x11,0x10,0x62,0x00,0x1e,0x24,0x02,0x00,0x18,0x10,0x62,0x00,0x1c,
+0x24,0x02,0x00,0x19,0x10,0x62,0x00,0x1a,0x00,0x00,0x00,0x00,0x14,0xa0,0x00,0x06,
+0x24,0x02,0x00,0x01,0x8d,0x02,0x00,0xd0,0x00,0x00,0x00,0x00,0x24,0x42,0x00,0x02,
+0x03,0xe0,0x00,0x08,0xad,0x02,0x00,0xd0,0x10,0xa2,0x00,0x0e,0x00,0x00,0x00,0x00,
+0x24,0x02,0x00,0x02,0x10,0xa2,0x00,0x09,0x24,0x02,0x00,0x03,0x10,0xa2,0x00,0x04,
+0x00,0x00,0x00,0x00,0x8d,0x02,0x00,0xd0,0x08,0x00,0x25,0xec,0x24,0x42,0xff,0xe0,
+0x8d,0x02,0x00,0xd0,0x08,0x00,0x25,0xec,0x24,0x42,0xff,0xf8,0x03,0xe0,0x00,0x08,
+0x00,0x00,0x00,0x00,0x8d,0x02,0x00,0xd0,0x08,0x00,0x25,0xec,0x24,0x42,0x00,0x01,
+0x10,0xa0,0xff,0xe8,0x24,0x02,0x00,0x01,0x10,0xa2,0xff,0xfa,0x00,0x00,0x00,0x00,
+0x24,0x02,0x00,0x02,0x10,0xa2,0xff,0xf5,0x24,0x02,0x00,0x03,0x14,0xa2,0xff,0xed,
+0x00,0x00,0x00,0x00,0x8d,0x02,0x00,0xd0,0x08,0x00,0x25,0xec,0x24,0x42,0xff,0xe8,
+0x10,0xa0,0xff,0xf0,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x01,0x10,0xa2,0xff,0xeb,
+0x24,0x02,0x00,0x02,0x10,0xa2,0xff,0xe6,0x00,0x00,0x00,0x00,0x8d,0x02,0x00,0xd0,
+0x08,0x00,0x25,0xec,0x24,0x42,0xff,0xd0,0x91,0x06,0x00,0x00,0x91,0x03,0x00,0xd4,
+0x25,0x0d,0x00,0x5c,0x30,0xc4,0x00,0xff,0x00,0x04,0x10,0x40,0x00,0x44,0x10,0x21,
+0x00,0x04,0x50,0x80,0x01,0x02,0x58,0x21,0x01,0x0a,0x48,0x21,0x00,0xc0,0x60,0x21,
+0x25,0x78,0x00,0x08,0x10,0x60,0x00,0x36,0x25,0x2e,0x00,0x60,0x10,0xa0,0x00,0x25,
+0x00,0x00,0x00,0x00,0x91,0x02,0x00,0xdd,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x1e,
+0x00,0x00,0x00,0x00,0x27,0x86,0x87,0xf8,0x01,0x46,0x10,0x21,0x8c,0x43,0x00,0x00,
+0x00,0x00,0x00,0x00,0xad,0x23,0x00,0x60,0x91,0x62,0x00,0x08,0x00,0x00,0x00,0x00,
+0x00,0x40,0x60,0x21,0xa1,0x02,0x00,0x00,0x31,0x82,0x00,0xff,0x00,0x02,0x10,0x80,
+0x00,0x46,0x10,0x21,0x8c,0x43,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x18,0x42,
+0xad,0xa3,0x00,0x00,0x91,0x04,0x00,0x00,0x8d,0xc5,0x00,0x00,0x00,0x04,0x20,0x80,
+0x00,0x86,0x10,0x21,0x8c,0x43,0x00,0x00,0x00,0x05,0x28,0x40,0x00,0x88,0x20,0x21,
+0x00,0x03,0x32,0x80,0x00,0xa6,0x10,0x2b,0x00,0xc2,0x28,0x0a,0xac,0x85,0x00,0x60,
+0x03,0xe0,0x00,0x08,0xa1,0x00,0x00,0xd4,0x27,0x86,0x87,0xf8,0x08,0x00,0x26,0x32,
+0xa1,0x00,0x00,0xdd,0x27,0x82,0x88,0x68,0x8d,0x03,0x00,0xd8,0x00,0x82,0x10,0x21,
+0x90,0x44,0x00,0x00,0x24,0x63,0x00,0x01,0x00,0x64,0x20,0x2b,0x14,0x80,0xff,0xab,
+0xad,0x03,0x00,0xd8,0x8d,0x22,0x00,0x60,0xa1,0x00,0x00,0xd4,0x00,0x02,0x1f,0xc2,
+0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x43,0x03,0xe0,0x00,0x08,0xad,0x02,0x00,0x5c,
+0x10,0xe0,0x00,0x14,0x24,0xc2,0xff,0xee,0x2c,0x42,0x00,0x02,0x14,0x40,0x00,0xa4,
+0x24,0x02,0x00,0x1a,0x10,0x82,0x00,0xa2,0x24,0x02,0x00,0x1b,0x10,0x82,0x00,0xa0,
+0x24,0x02,0x00,0x11,0x10,0x82,0x00,0x92,0x24,0x02,0x00,0x18,0x10,0x82,0x00,0x90,
+0x24,0x02,0x00,0x19,0x10,0x82,0x00,0x8e,0x00,0x00,0x00,0x00,0x14,0xa0,0x00,0x7c,
+0x24,0x02,0x00,0x01,0x8d,0x02,0x00,0xd0,0x00,0x00,0x00,0x00,0x24,0x42,0x00,0x02,
+0xad,0x02,0x00,0xd0,0x8d,0xe3,0x00,0x00,0x8d,0xa2,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x43,0x10,0x21,0xad,0xa2,0x00,0x00,0xad,0xe0,0x00,0x00,0x8d,0xa3,0x00,0x00,
+0x8d,0xc4,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x83,0x10,0x2a,0x10,0x40,0x00,0x4d,
+0x24,0x02,0x00,0x1b,0x93,0x05,0x00,0x01,0x00,0x00,0x00,0x00,0x10,0x45,0x00,0x21,
+0x00,0x00,0x00,0x00,0x91,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x45,0x00,0x05,
+0x24,0x02,0x00,0x01,0xa1,0x05,0x00,0x00,0xa1,0x02,0x00,0xd4,0x03,0xe0,0x00,0x08,
+0xad,0x00,0x00,0xd8,0x91,0x02,0x00,0xdd,0x24,0x03,0x00,0x01,0x10,0x43,0x00,0x05,
+0x00,0x00,0x00,0x00,0xa1,0x03,0x00,0xd4,0xad,0x00,0x00,0xd8,0x03,0xe0,0x00,0x08,
+0xa1,0x03,0x00,0xdd,0x00,0x04,0x17,0xc2,0x00,0x82,0x10,0x21,0x00,0x02,0x10,0x43,
+0xad,0xa2,0x00,0x00,0x91,0x03,0x00,0x00,0x27,0x82,0x87,0xf8,0x8d,0xc5,0x00,0x00,
+0x00,0x03,0x18,0x80,0x00,0x62,0x18,0x21,0x8c,0x64,0x00,0x00,0x00,0x05,0x28,0x40,
+0x00,0x04,0x32,0x80,0x00,0xa6,0x10,0x2b,0x00,0xc2,0x28,0x0a,0x08,0x00,0x26,0x44,
+0xad,0xc5,0x00,0x00,0x91,0x02,0x00,0xde,0x00,0x00,0x00,0x00,0x2c,0x42,0x00,0x02,
+0x14,0x40,0xff,0xdc,0x00,0x04,0x17,0xc2,0x00,0x82,0x10,0x21,0x00,0x02,0x10,0x43,
+0xad,0xa2,0x00,0x00,0x91,0x03,0x00,0x00,0x27,0x82,0x87,0xf8,0x8d,0xc5,0x00,0x00,
+0x00,0x03,0x18,0x80,0x00,0x62,0x18,0x21,0x8c,0x64,0x00,0x00,0x00,0x05,0x28,0x40,
+0x3c,0x03,0xb0,0x03,0x00,0x04,0x32,0x80,0x00,0xa6,0x10,0x2b,0x00,0xc2,0x28,0x0a,
+0xad,0xc5,0x00,0x00,0x34,0x63,0x01,0x08,0x8c,0x64,0x00,0x00,0x8d,0x03,0x00,0xe4,
+0x00,0x00,0x00,0x00,0x00,0x64,0x10,0x2b,0x14,0x40,0x00,0x03,0x00,0x83,0x28,0x23,
+0x00,0x83,0x10,0x23,0x24,0x45,0xff,0xff,0x3c,0x02,0x00,0x98,0x34,0x42,0x96,0x80,
+0x00,0x45,0x10,0x2b,0x10,0x40,0x00,0x04,0x00,0x00,0x00,0x00,0xa5,0x00,0x00,0xe0,
+0x03,0xe0,0x00,0x08,0xa1,0x00,0x00,0xde,0x24,0x02,0x00,0x03,0x03,0xe0,0x00,0x08,
+0xa1,0x02,0x00,0xde,0x97,0x82,0x91,0x5c,0x00,0x00,0x00,0x00,0x00,0x62,0x10,0x2a,
+0x10,0x40,0xff,0x32,0x00,0x00,0x00,0x00,0x91,0x02,0x00,0xdd,0x00,0x00,0x00,0x00,
+0x14,0x40,0x00,0x15,0x00,0x00,0x00,0x00,0x91,0x03,0x00,0x00,0x27,0x82,0x87,0xf8,
+0x00,0x03,0x18,0x80,0x00,0x62,0x10,0x21,0x8c,0x44,0x00,0x00,0x00,0x68,0x18,0x21,
+0xac,0x64,0x00,0x60,0x93,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x10,0x80,
+0x01,0x02,0x10,0x21,0x24,0x4e,0x00,0x60,0xa1,0x05,0x00,0x00,0x8d,0xc2,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x02,0x1f,0xc2,0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x43,
+0x03,0xe0,0x00,0x08,0xad,0xa2,0x00,0x00,0x08,0x00,0x26,0xdb,0xa1,0x00,0x00,0xdd,
+0x10,0xa2,0x00,0x0c,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x02,0x10,0xa2,0xff,0x85,
+0x24,0x02,0x00,0x03,0x10,0xa2,0x00,0x04,0x00,0x00,0x00,0x00,0x8d,0x02,0x00,0xd0,
+0x08,0x00,0x26,0x6c,0x24,0x42,0xff,0xe0,0x8d,0x02,0x00,0xd0,0x08,0x00,0x26,0x6c,
+0x24,0x42,0xff,0xf8,0x8d,0x02,0x00,0xd0,0x08,0x00,0x26,0x6c,0x24,0x42,0x00,0x01,
+0x10,0xa0,0xff,0x74,0x24,0x02,0x00,0x01,0x10,0xa2,0xff,0xfa,0x00,0x00,0x00,0x00,
+0x24,0x02,0x00,0x02,0x10,0xa2,0xff,0x73,0x24,0x02,0x00,0x03,0x14,0xa2,0xff,0xef,
+0x00,0x00,0x00,0x00,0x8d,0x02,0x00,0xd0,0x08,0x00,0x26,0x6c,0x24,0x42,0xff,0xe8,
+0x10,0xa0,0xff,0xf0,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x01,0x10,0xa2,0xff,0x69,
+0x24,0x02,0x00,0x02,0x10,0xa2,0xff,0xe8,0x00,0x00,0x00,0x00,0x8d,0x02,0x00,0xd0,
+0x08,0x00,0x26,0x6c,0x24,0x42,0xff,0xd0,0x27,0xbd,0xff,0xe8,0x3c,0x02,0xb0,0x03,
+0xaf,0xbf,0x00,0x14,0xaf,0xb0,0x00,0x10,0x34,0x42,0x01,0x18,0x8c,0x50,0x00,0x00,
+0x00,0x00,0x00,0x00,0x32,0x03,0x00,0x01,0x14,0x60,0x00,0x14,0x00,0x00,0x00,0x00,
+0x32,0x02,0x01,0x00,0x14,0x40,0x00,0x09,0x00,0x00,0x00,0x00,0x32,0x02,0x08,0x00,
+0x10,0x40,0x00,0x02,0x24,0x02,0x00,0x01,0xa3,0x82,0x92,0x14,0x8f,0xbf,0x00,0x14,
+0x8f,0xb0,0x00,0x10,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x18,0x0c,0x00,0x0a,0x65,
+0x00,0x00,0x00,0x00,0x26,0x02,0xff,0x00,0xa3,0x80,0x92,0x14,0x3c,0x01,0xb0,0x03,
+0xac,0x22,0x01,0x18,0x08,0x00,0x27,0x18,0x32,0x02,0x08,0x00,0x0c,0x00,0x25,0x71,
+0x00,0x00,0x00,0x00,0x26,0x02,0xff,0xff,0x3c,0x01,0xb0,0x03,0xac,0x22,0x01,0x18,
+0x08,0x00,0x27,0x15,0x32,0x02,0x01,0x00,0x27,0xbd,0xff,0xe0,0x3c,0x02,0xb0,0x03,
+0x34,0x42,0x00,0xd0,0xaf,0xbf,0x00,0x18,0x8c,0x43,0x00,0x00,0x3c,0x02,0x00,0x40,
+0x24,0x07,0x0f,0xff,0x00,0x03,0x33,0x02,0x00,0x03,0x2d,0x02,0x00,0x03,0x43,0x02,
+0x30,0x69,0x0f,0xff,0x00,0x62,0x18,0x24,0x30,0xa5,0x00,0x03,0x30,0xc6,0x00,0xff,
+0x10,0x60,0x00,0x08,0x31,0x08,0x00,0xff,0x01,0x00,0x30,0x21,0x0c,0x00,0x27,0x4b,
+0xaf,0xa9,0x00,0x10,0x8f,0xbf,0x00,0x18,0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x20,0x0c,0x00,0x27,0xae,0x00,0x00,0x00,0x00,0x3c,0x03,0xb0,0x03,
+0x34,0x63,0x00,0xd4,0x08,0x00,0x27,0x41,0xac,0x62,0x00,0x00,0x27,0xbd,0xff,0xd8,
+0xaf,0xb0,0x00,0x10,0x30,0xd0,0x00,0xff,0x2e,0x02,0x00,0x2e,0xaf,0xb4,0x00,0x20,
+0xaf,0xb2,0x00,0x18,0xaf,0xb1,0x00,0x14,0xaf,0xbf,0x00,0x24,0xaf,0xb3,0x00,0x1c,
+0x30,0xb1,0x00,0xff,0x8f,0xb4,0x00,0x38,0x14,0x40,0x00,0x07,0x00,0x80,0x90,0x21,
+0x8f,0xbf,0x00,0x24,0x8f,0xb4,0x00,0x20,0x7b,0xb2,0x00,0xfc,0x7b,0xb0,0x00,0xbc,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x28,0x2e,0x13,0x00,0x10,0x24,0x05,0x00,0x14,
+0x0c,0x00,0x18,0xa0,0x24,0x06,0x01,0x07,0x12,0x60,0x00,0x46,0x02,0x40,0x20,0x21,
+0x02,0x00,0x90,0x21,0x00,0x14,0x1c,0x00,0x32,0x42,0x00,0x3f,0x24,0x04,0x00,0x50,
+0x0c,0x00,0x01,0x31,0x00,0x62,0x80,0x25,0x24,0x03,0x00,0x01,0x12,0x23,0x00,0x3a,
+0x2a,0x22,0x00,0x02,0x14,0x40,0x00,0x34,0x24,0x02,0x00,0x02,0x12,0x22,0x00,0x2f,
+0x24,0x02,0x00,0x03,0x12,0x22,0x00,0x28,0x02,0x00,0x30,0x21,0x16,0x60,0xff,0xe4,
+0x00,0x00,0x00,0x00,0x16,0x40,0x00,0x1f,0x02,0x80,0x80,0x21,0x0c,0x00,0x01,0x31,
+0x24,0x04,0x00,0x50,0x24,0x03,0x00,0x01,0x12,0x23,0x00,0x16,0x2a,0x22,0x00,0x02,
+0x14,0x40,0x00,0x0f,0x24,0x02,0x00,0x02,0x12,0x22,0x00,0x09,0x24,0x02,0x00,0x03,
+0x16,0x22,0xff,0xd7,0x32,0x06,0x0e,0xbf,0x00,0x06,0x34,0x00,0x24,0x04,0x08,0x4c,
+0x0c,0x00,0x18,0x5b,0x24,0x05,0xff,0xff,0x08,0x00,0x27,0x58,0x00,0x00,0x00,0x00,
+0x32,0x06,0x0e,0xbf,0x00,0x06,0x34,0x00,0x08,0x00,0x27,0x84,0x24,0x04,0x08,0x48,
+0x16,0x20,0xff,0xcb,0x32,0x06,0x0e,0xbf,0x00,0x06,0x34,0x00,0x08,0x00,0x27,0x84,
+0x24,0x04,0x08,0x40,0x32,0x06,0x0e,0xbf,0x00,0x06,0x34,0x00,0x08,0x00,0x27,0x84,
+0x24,0x04,0x08,0x44,0x02,0x20,0x20,0x21,0x0c,0x00,0x28,0x46,0x00,0x00,0x28,0x21,
+0x08,0x00,0x27,0x77,0x00,0x40,0x80,0x21,0x24,0x04,0x08,0x4c,0x0c,0x00,0x18,0x5b,
+0x24,0x05,0xff,0xff,0x08,0x00,0x27,0x73,0x00,0x00,0x00,0x00,0x02,0x00,0x30,0x21,
+0x08,0x00,0x27,0x9b,0x24,0x04,0x08,0x48,0x16,0x20,0xff,0xd0,0x02,0x00,0x30,0x21,
+0x08,0x00,0x27,0x9b,0x24,0x04,0x08,0x40,0x02,0x00,0x30,0x21,0x08,0x00,0x27,0x9b,
+0x24,0x04,0x08,0x44,0x02,0x00,0x30,0x21,0x0c,0x00,0x27,0xf5,0x02,0x20,0x28,0x21,
+0x08,0x00,0x27,0x65,0x00,0x40,0x90,0x21,0x27,0xbd,0xff,0xd8,0x2c,0xc2,0x00,0x2e,
+0xaf,0xb3,0x00,0x1c,0xaf,0xb1,0x00,0x14,0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x20,
+0xaf,0xb2,0x00,0x18,0x00,0xc0,0x80,0x21,0x30,0xb1,0x00,0xff,0x00,0x80,0x98,0x21,
+0x14,0x40,0x00,0x07,0x00,0x00,0x18,0x21,0x8f,0xbf,0x00,0x20,0x7b,0xb2,0x00,0xfc,
+0x7b,0xb0,0x00,0xbc,0x00,0x60,0x10,0x21,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x28,
+0x2e,0x12,0x00,0x10,0x24,0x05,0x00,0x14,0x0c,0x00,0x18,0xa0,0x24,0x06,0x01,0x07,
+0x12,0x40,0x00,0x2a,0x02,0x00,0x10,0x21,0x30,0x45,0x00,0x3f,0x0c,0x00,0x28,0x46,
+0x02,0x20,0x20,0x21,0x12,0x40,0x00,0x03,0x00,0x40,0x98,0x21,0x08,0x00,0x27,0xba,
+0x02,0x60,0x18,0x21,0x02,0x20,0x20,0x21,0x0c,0x00,0x28,0x46,0x00,0x00,0x28,0x21,
+0x24,0x04,0x00,0x50,0x0c,0x00,0x01,0x31,0x00,0x40,0x80,0x21,0x24,0x03,0x00,0x01,
+0x12,0x23,0x00,0x16,0x2a,0x22,0x00,0x02,0x14,0x40,0x00,0x0f,0x24,0x02,0x00,0x02,
+0x12,0x22,0x00,0x09,0x24,0x02,0x00,0x03,0x16,0x22,0xff,0xf0,0x32,0x06,0x0e,0xbf,
+0x00,0x06,0x34,0x00,0x24,0x04,0x08,0x4c,0x0c,0x00,0x18,0x5b,0x24,0x05,0xff,0xff,
+0x08,0x00,0x27,0xba,0x02,0x60,0x18,0x21,0x32,0x06,0x0e,0xbf,0x00,0x06,0x34,0x00,
+0x08,0x00,0x27,0xde,0x24,0x04,0x08,0x48,0x16,0x20,0xff,0xe4,0x32,0x06,0x0e,0xbf,
+0x00,0x06,0x34,0x00,0x08,0x00,0x27,0xde,0x24,0x04,0x08,0x40,0x32,0x06,0x0e,0xbf,
+0x00,0x06,0x34,0x00,0x08,0x00,0x27,0xde,0x24,0x04,0x08,0x44,0x02,0x60,0x20,0x21,
+0x02,0x00,0x30,0x21,0x0c,0x00,0x27,0xf5,0x02,0x20,0x28,0x21,0x08,0x00,0x27,0xc7,
+0x30,0x45,0x00,0x3f,0x27,0xbd,0xff,0xe0,0xaf,0xb0,0x00,0x10,0x30,0xb0,0x00,0xff,
+0x02,0x00,0x20,0x21,0x00,0x00,0x28,0x21,0xaf,0xb1,0x00,0x14,0xaf,0xbf,0x00,0x1c,
+0x00,0xc0,0x88,0x21,0x0c,0x00,0x28,0x46,0xaf,0xb2,0x00,0x18,0x00,0x40,0x18,0x21,
+0x2e,0x22,0x00,0x1f,0x10,0x40,0x00,0x26,0x2e,0x22,0x00,0x10,0x10,0x40,0x00,0x07,
+0x34,0x62,0x01,0x00,0x02,0x20,0x10,0x21,0x8f,0xbf,0x00,0x1c,0x8f,0xb2,0x00,0x18,
+0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x20,0x24,0x04,0x00,0x50,
+0x0c,0x00,0x01,0x31,0x00,0x02,0x94,0x00,0x24,0x03,0x00,0x01,0x12,0x03,0x00,0x15,
+0x2a,0x02,0x00,0x02,0x14,0x40,0x00,0x0f,0x24,0x02,0x00,0x02,0x12,0x02,0x00,0x0a,
+0x24,0x02,0x00,0x03,0x12,0x02,0x00,0x03,0x02,0x40,0x30,0x21,0x08,0x00,0x28,0x05,
+0x26,0x31,0xff,0xf1,0x24,0x04,0x08,0x4c,0x0c,0x00,0x18,0x5b,0x24,0x05,0xff,0xff,
+0x08,0x00,0x28,0x05,0x26,0x31,0xff,0xf1,0x02,0x40,0x30,0x21,0x08,0x00,0x28,0x1a,
+0x24,0x04,0x08,0x48,0x16,0x00,0xff,0xf5,0x02,0x40,0x30,0x21,0x08,0x00,0x28,0x1a,
+0x24,0x04,0x08,0x40,0x02,0x40,0x30,0x21,0x08,0x00,0x28,0x1a,0x24,0x04,0x08,0x44,
+0x34,0x62,0x01,0x40,0x24,0x04,0x00,0x50,0x0c,0x00,0x01,0x31,0x00,0x02,0x94,0x00,
+0x24,0x03,0x00,0x01,0x12,0x03,0x00,0x15,0x2a,0x02,0x00,0x02,0x14,0x40,0x00,0x0f,
+0x24,0x02,0x00,0x02,0x12,0x02,0x00,0x0a,0x24,0x02,0x00,0x03,0x12,0x02,0x00,0x03,
+0x02,0x40,0x30,0x21,0x08,0x00,0x28,0x05,0x26,0x31,0xff,0xe2,0x24,0x04,0x08,0x4c,
+0x0c,0x00,0x18,0x5b,0x24,0x05,0xff,0xff,0x08,0x00,0x28,0x05,0x26,0x31,0xff,0xe2,
+0x02,0x40,0x30,0x21,0x08,0x00,0x28,0x38,0x24,0x04,0x08,0x48,0x16,0x00,0xff,0xf5,
+0x02,0x40,0x30,0x21,0x08,0x00,0x28,0x38,0x24,0x04,0x08,0x40,0x02,0x40,0x30,0x21,
+0x08,0x00,0x28,0x38,0x24,0x04,0x08,0x44,0x27,0xbd,0xff,0xe0,0x00,0x80,0x10,0x21,
+0x24,0x04,0x00,0x50,0xaf,0xb1,0x00,0x14,0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x18,
+0x00,0xa0,0x88,0x21,0x0c,0x00,0x01,0x31,0x30,0x50,0x00,0xff,0x24,0x03,0x00,0x01,
+0x12,0x03,0x00,0x3e,0x02,0x20,0x30,0x21,0x2a,0x02,0x00,0x02,0x14,0x40,0x00,0x2a,
+0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x02,0x12,0x02,0x00,0x19,0x24,0x04,0x08,0x34,
+0x24,0x02,0x00,0x03,0x12,0x02,0x00,0x05,0x24,0x04,0x08,0x3c,0x8f,0xbf,0x00,0x18,
+0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x20,0x0c,0x00,0x18,0x5b,
+0x3c,0x05,0x3f,0x00,0x24,0x04,0x08,0x3c,0x3c,0x05,0x80,0x00,0x0c,0x00,0x18,0x5b,
+0x00,0x00,0x30,0x21,0x3c,0x05,0x80,0x00,0x24,0x06,0x00,0x01,0x0c,0x00,0x18,0x5b,
+0x24,0x04,0x08,0x3c,0x0c,0x00,0x01,0x31,0x24,0x04,0x00,0x28,0x24,0x04,0x08,0xac,
+0x0c,0x00,0x18,0x3d,0x24,0x05,0x0f,0xff,0x08,0x00,0x28,0x5b,0x00,0x00,0x00,0x00,
+0x0c,0x00,0x18,0x5b,0x3c,0x05,0x3f,0x00,0x24,0x04,0x08,0x34,0x3c,0x05,0x80,0x00,
+0x0c,0x00,0x18,0x5b,0x00,0x00,0x30,0x21,0x3c,0x05,0x80,0x00,0x24,0x06,0x00,0x01,
+0x0c,0x00,0x18,0x5b,0x24,0x04,0x08,0x34,0x0c,0x00,0x01,0x31,0x24,0x04,0x00,0x28,
+0x08,0x00,0x28,0x6c,0x24,0x04,0x08,0xa8,0x16,0x00,0xff,0xdc,0x02,0x20,0x30,0x21,
+0x24,0x04,0x08,0x24,0x0c,0x00,0x18,0x5b,0x3c,0x05,0x3f,0x00,0x24,0x04,0x08,0x24,
+0x3c,0x05,0x80,0x00,0x0c,0x00,0x18,0x5b,0x00,0x00,0x30,0x21,0x3c,0x05,0x80,0x00,
+0x24,0x06,0x00,0x01,0x0c,0x00,0x18,0x5b,0x24,0x04,0x08,0x24,0x0c,0x00,0x01,0x31,
+0x24,0x04,0x00,0x28,0x08,0x00,0x28,0x6c,0x24,0x04,0x08,0xa0,0x24,0x04,0x08,0x2c,
+0x0c,0x00,0x18,0x5b,0x3c,0x05,0x3f,0x00,0x24,0x04,0x08,0x2c,0x3c,0x05,0x80,0x00,
+0x0c,0x00,0x18,0x5b,0x00,0x00,0x30,0x21,0x3c,0x05,0x80,0x00,0x24,0x06,0x00,0x01,
+0x0c,0x00,0x18,0x5b,0x24,0x04,0x08,0x2c,0x0c,0x00,0x01,0x31,0x24,0x04,0x00,0x28,
+0x08,0x00,0x28,0x6c,0x24,0x04,0x08,0xa4,0x27,0xbd,0xff,0xe8,0xaf,0xbf,0x00,0x10,
+0x0c,0x00,0x29,0x4c,0x00,0x00,0x00,0x00,0x0c,0x00,0x29,0x4e,0x00,0x00,0x00,0x00,
+0x0c,0x00,0x29,0x75,0x00,0x00,0x00,0x00,0x3c,0x04,0xb0,0x05,0x34,0x84,0x00,0x04,
+0x0c,0x00,0x29,0x55,0x34,0x05,0x9c,0x40,0x8f,0xbf,0x00,0x10,0x00,0x00,0x00,0x00,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x18,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,
+0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,0x24,0x02,0x00,0x01,
+0x03,0xe0,0x00,0x08,0x24,0x02,0x00,0x01,0x97,0x82,0x88,0x90,0x00,0x00,0x00,0x00,
+0x2c,0x43,0x00,0x64,0x24,0x42,0x00,0x01,0xa7,0x82,0x88,0x90,0x14,0x60,0x00,0x28,
+0x00,0x80,0x30,0x21,0x8c,0x82,0x00,0x00,0x3c,0x03,0x20,0x00,0xa7,0x80,0x88,0x90,
+0x00,0x43,0x10,0x24,0x10,0x40,0x00,0x22,0x00,0x00,0x00,0x00,0x8c,0x82,0x00,0x00,
+0x3c,0x03,0x80,0x00,0x00,0x43,0x10,0x25,0x97,0x83,0x88,0x84,0xac,0x82,0x00,0x00,
+0x8c,0x85,0x00,0x00,0x24,0x63,0x00,0x01,0x3c,0x02,0x40,0x64,0x34,0x42,0x64,0x00,
+0x00,0x03,0x24,0x00,0x00,0xa2,0x28,0x25,0x00,0x04,0x24,0x03,0x24,0x02,0x00,0x64,
+0xac,0xc5,0x00,0x00,0xa7,0x83,0x88,0x84,0x10,0x82,0x00,0x2b,0x00,0x00,0x00,0x00,
+0x87,0x82,0x88,0x86,0x24,0x03,0x00,0x3c,0x10,0x43,0x00,0x21,0x00,0x00,0x00,0x00,
+0x87,0x82,0x88,0x88,0x00,0x00,0x00,0x00,0x10,0x43,0x00,0x17,0x00,0x00,0x00,0x00,
+0x87,0x83,0x88,0x8a,0x24,0x02,0x00,0x18,0x10,0x62,0x00,0x0d,0x00,0x00,0x00,0x00,
+0x87,0x83,0x88,0x8c,0x24,0x02,0x01,0x6d,0x10,0x62,0x00,0x03,0x00,0x00,0x00,0x00,
+0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x97,0x82,0x88,0x8e,0xa7,0x80,0x88,0x8c,
+0x24,0x42,0x00,0x01,0xa7,0x82,0x88,0x8e,0x08,0x00,0x28,0xe4,0x00,0x00,0x00,0x00,
+0x97,0x82,0x88,0x8c,0xa7,0x80,0x88,0x8a,0x24,0x42,0x00,0x01,0xa7,0x82,0x88,0x8c,
+0x08,0x00,0x28,0xe0,0x00,0x00,0x00,0x00,0x97,0x82,0x88,0x8a,0xa7,0x80,0x88,0x88,
+0x24,0x42,0x00,0x01,0xa7,0x82,0x88,0x8a,0x08,0x00,0x28,0xdc,0x00,0x00,0x00,0x00,
+0x97,0x82,0x88,0x88,0xa7,0x80,0x88,0x86,0x24,0x42,0x00,0x01,0xa7,0x82,0x88,0x88,
+0x08,0x00,0x28,0xd8,0x00,0x00,0x00,0x00,0x97,0x82,0x88,0x86,0xa7,0x80,0x88,0x84,
+0x24,0x42,0x00,0x01,0xa7,0x82,0x88,0x86,0x08,0x00,0x28,0xd4,0x00,0x00,0x00,0x00,
+0x00,0x04,0x24,0x00,0x3c,0x03,0xb0,0x07,0x00,0x04,0x24,0x03,0x34,0x63,0x00,0x28,
+0x90,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x40,0x10,0x40,0xff,0xfc,
+0x00,0x00,0x00,0x00,0x3c,0x01,0xb0,0x07,0xa0,0x24,0x00,0x00,0x03,0xe0,0x00,0x08,
+0x00,0x00,0x10,0x21,0x3c,0x02,0xb0,0x07,0x34,0x42,0x00,0x28,0x90,0x43,0x00,0x00,
+0x00,0x00,0x00,0x00,0x30,0x63,0x00,0x01,0x10,0x60,0x00,0x06,0x24,0x02,0xff,0xff,
+0x3c,0x02,0xb0,0x07,0x90,0x42,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x16,0x00,
+0x00,0x02,0x16,0x03,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x27,0xbd,0xff,0xe0,
+0xaf,0xb0,0x00,0x10,0x3c,0x10,0x04,0xc4,0x00,0x04,0x11,0x00,0x36,0x10,0xb4,0x00,
+0x02,0x02,0x00,0x1b,0xaf,0xb1,0x00,0x14,0x3c,0x11,0xb0,0x07,0x36,0x31,0x00,0x18,
+0x24,0x04,0x00,0x0a,0xaf,0xbf,0x00,0x18,0x14,0x40,0x00,0x02,0x00,0x00,0x00,0x00,
+0x00,0x07,0x00,0x0d,0x00,0x00,0x80,0x12,0x0c,0x00,0x29,0xa1,0x00,0x00,0x00,0x00,
+0x92,0x22,0x00,0x00,0x24,0x03,0xff,0x80,0x24,0x04,0x00,0x0a,0x00,0x43,0x10,0x25,
+0x0c,0x00,0x29,0xa1,0xa2,0x22,0x00,0x00,0x24,0x04,0x00,0x0a,0x3c,0x01,0xb0,0x07,
+0xa0,0x30,0x00,0x00,0x0c,0x00,0x29,0xa1,0x00,0x10,0x82,0x03,0x3c,0x02,0xb0,0x07,
+0x34,0x42,0x00,0x08,0xa0,0x50,0x00,0x00,0x0c,0x00,0x29,0xa1,0x24,0x04,0x00,0x0a,
+0x92,0x22,0x00,0x00,0x8f,0xbf,0x00,0x18,0x8f,0xb0,0x00,0x10,0x30,0x42,0x00,0x7f,
+0xa2,0x22,0x00,0x00,0x8f,0xb1,0x00,0x14,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x20,
+0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,
+0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x3c,0x03,0xb0,0x03,0x34,0x63,0x00,0x58,
+0x8c,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x34,0x42,0x07,0xa4,0x03,0xe0,0x00,0x08,
+0xac,0x62,0x00,0x00,0x27,0xbd,0xff,0xf8,0x00,0x80,0x38,0x21,0x00,0xa0,0x30,0x21,
+0x00,0x00,0x18,0x21,0x00,0x63,0x00,0x18,0x00,0x00,0x10,0x12,0x00,0xc2,0x10,0x2b,
+0x14,0x40,0x00,0x05,0x00,0x00,0x00,0x00,0x24,0x63,0x00,0x01,0x2c,0x62,0x01,0x00,
+0x14,0x40,0xff,0xf9,0x00,0x63,0x00,0x18,0x24,0x63,0xff,0xff,0x00,0x63,0x00,0x18,
+0x30,0x63,0x00,0xff,0x8c,0xe4,0x00,0x00,0x00,0x03,0x2a,0x00,0x00,0x03,0x1c,0x00,
+0x00,0x00,0x10,0x12,0x00,0xc2,0x10,0x23,0x30,0x42,0x00,0xff,0x00,0x45,0x10,0x21,
+0x00,0x43,0x10,0x21,0x00,0x82,0x20,0x25,0xac,0xe4,0x00,0x00,0x8c,0xe2,0x00,0x00,
+0x3c,0x03,0x40,0x00,0x00,0x43,0x10,0x25,0xac,0xe2,0x00,0x00,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x08,0x27,0xbd,0xff,0xe0,0xaf,0xbf,0x00,0x18,0xaf,0xb1,0x00,0x14,
+0xaf,0xb0,0x00,0x10,0x3c,0x04,0xb0,0x03,0x8c,0x82,0x00,0x00,0x3c,0x06,0xb0,0x03,
+0x34,0xc6,0x00,0x08,0x34,0x42,0x40,0x00,0xac,0x82,0x00,0x00,0x8c,0x83,0x00,0x00,
+0x24,0x02,0xcf,0xff,0x3c,0x11,0xb0,0x07,0x00,0x62,0x18,0x24,0xac,0x83,0x00,0x00,
+0x8c,0xc5,0x00,0x00,0x3c,0x02,0x00,0xff,0x24,0x04,0x00,0x0a,0x00,0xa2,0x28,0x25,
+0xac,0xc5,0x00,0x00,0x0c,0x00,0x29,0xa1,0x36,0x31,0x00,0x18,0x24,0x02,0xff,0x83,
+0x3c,0x04,0x00,0x01,0xa2,0x22,0x00,0x00,0x0c,0x00,0x29,0x1f,0x34,0x84,0xc2,0x00,
+0x0c,0x00,0x29,0xa1,0x24,0x04,0x00,0x0a,0x24,0x02,0x00,0x03,0xa2,0x22,0x00,0x00,
+0x24,0x04,0x00,0x0a,0x0c,0x00,0x29,0xa1,0x3c,0x10,0xb0,0x07,0x36,0x10,0x00,0x10,
+0x24,0x02,0x00,0x06,0xa2,0x02,0x00,0x00,0x0c,0x00,0x29,0xa1,0x24,0x04,0x00,0x0a,
+0xa2,0x00,0x00,0x00,0x8f,0xbf,0x00,0x18,0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x20,0x10,0x80,0x00,0x05,0x00,0x00,0x18,0x21,0x24,0x63,0x00,0x01,
+0x00,0x64,0x10,0x2b,0x14,0x40,0xff,0xfd,0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,
+0x00,0x00,0x00,0x00,0x27,0xbd,0xff,0xc0,0xaf,0xb5,0x00,0x34,0xaf,0xb2,0x00,0x28,
+0xaf,0xb0,0x00,0x20,0xaf,0xbf,0x00,0x38,0xaf,0xb4,0x00,0x30,0xaf,0xb3,0x00,0x2c,
+0xaf,0xb1,0x00,0x24,0xaf,0xa5,0x00,0x44,0x90,0xa7,0x00,0x00,0x00,0x80,0xa8,0x21,
+0x00,0xc0,0x90,0x21,0x00,0x07,0x1e,0x00,0x10,0x60,0x00,0x0f,0x00,0x80,0x80,0x21,
+0x00,0x03,0x1e,0x03,0x24,0x02,0x00,0x25,0x10,0x62,0x00,0x13,0x00,0x00,0x88,0x21,
+0xa2,0x07,0x00,0x00,0x8f,0xa5,0x00,0x44,0x26,0x10,0x00,0x01,0x24,0xa5,0x00,0x01,
+0xaf,0xa5,0x00,0x44,0x90,0xa7,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x1e,0x00,
+0x14,0x60,0xff,0xf3,0x00,0x00,0x00,0x00,0x02,0x15,0x10,0x23,0xa2,0x00,0x00,0x00,
+0x8f,0xbf,0x00,0x38,0x7b,0xb4,0x01,0xbc,0x7b,0xb2,0x01,0x7c,0x7b,0xb0,0x01,0x3c,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x40,0x24,0xa5,0x00,0x01,0xaf,0xa5,0x00,0x44,
+0x80,0xa3,0x00,0x00,0x00,0x00,0x00,0x00,0x24,0x63,0xff,0xe0,0x2c,0x62,0x00,0x11,
+0x10,0x40,0x00,0x11,0x00,0xa0,0x38,0x21,0x00,0x03,0x10,0x80,0x3c,0x03,0x80,0x01,
+0x24,0x63,0x09,0x98,0x00,0x43,0x10,0x21,0x8c,0x44,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x80,0x00,0x08,0x00,0x00,0x00,0x00,0x08,0x00,0x29,0xce,0x36,0x31,0x00,0x10,
+0x08,0x00,0x29,0xce,0x36,0x31,0x00,0x08,0x08,0x00,0x29,0xce,0x36,0x31,0x00,0x20,
+0x08,0x00,0x29,0xce,0x36,0x31,0x00,0x04,0x90,0xe4,0x00,0x00,0x3c,0x02,0x80,0x01,
+0x24,0x42,0x02,0x14,0x00,0x44,0x10,0x21,0x90,0x43,0x00,0x00,0x00,0x00,0x00,0x00,
+0x30,0x63,0x00,0x04,0x14,0x60,0x00,0xfd,0x24,0x14,0xff,0xff,0x00,0x04,0x16,0x00,
+0x00,0x02,0x16,0x03,0x24,0x03,0x00,0x2a,0x10,0x43,0x00,0xee,0x26,0x42,0x00,0x03,
+0x80,0xa3,0x00,0x00,0x24,0x02,0x00,0x2e,0x10,0x62,0x00,0xcc,0x24,0x08,0xff,0xff,
+0x80,0xa3,0x00,0x00,0x24,0x02,0x00,0x68,0x10,0x62,0x00,0xc4,0x24,0x06,0xff,0xff,
+0x24,0x02,0x00,0x6c,0x10,0x62,0x00,0xc1,0x24,0x02,0x00,0x4c,0x10,0x62,0x00,0xbf,
+0x24,0x02,0x00,0x5a,0x10,0x62,0x00,0xbd,0x00,0x00,0x00,0x00,0x80,0xa3,0x00,0x00,
+0x00,0x00,0x00,0x00,0x24,0x63,0xff,0xdb,0x2c,0x62,0x00,0x54,0x10,0x40,0x00,0xaa,
+0x24,0x09,0x00,0x0a,0x00,0x03,0x10,0x80,0x3c,0x03,0x80,0x01,0x24,0x63,0x09,0xdc,
+0x00,0x43,0x10,0x21,0x8c,0x44,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x08,
+0x00,0x00,0x00,0x00,0x32,0x22,0x00,0x10,0x14,0x40,0x00,0x09,0x24,0x02,0xff,0xfc,
+0x26,0x94,0xff,0xff,0x1a,0x80,0x00,0x05,0x24,0x02,0x00,0x20,0x26,0x94,0xff,0xff,
+0xa2,0x02,0x00,0x00,0x1e,0x80,0xff,0xfd,0x26,0x10,0x00,0x01,0x24,0x02,0xff,0xfc,
+0x26,0x44,0x00,0x03,0x00,0x82,0x90,0x24,0x92,0x42,0x00,0x03,0x26,0x94,0xff,0xff,
+0x26,0x52,0x00,0x04,0xa2,0x02,0x00,0x00,0x1a,0x80,0x00,0x06,0x26,0x10,0x00,0x01,
+0x24,0x02,0x00,0x20,0x26,0x94,0xff,0xff,0xa2,0x02,0x00,0x00,0x1e,0x80,0xff,0xfd,
+0x26,0x10,0x00,0x01,0x8f,0xa5,0x00,0x44,0x08,0x00,0x29,0xc0,0x24,0xa5,0x00,0x01,
+0x24,0x02,0x00,0x25,0x08,0x00,0x29,0xbd,0xa2,0x02,0x00,0x00,0x36,0x31,0x00,0x40,
+0x24,0x09,0x00,0x10,0x24,0x02,0x00,0x4c,0x10,0xc2,0x00,0x2a,0x24,0x02,0x00,0x6c,
+0x10,0xc2,0x00,0x05,0x24,0x02,0x00,0x5a,0x10,0xc2,0x00,0x1f,0x24,0x02,0x00,0x68,
+0x10,0xc2,0x00,0x13,0x24,0x02,0xff,0xfc,0x24,0x02,0xff,0xfc,0x26,0x43,0x00,0x03,
+0x00,0x62,0x90,0x24,0x32,0x22,0x00,0x02,0x8e,0x47,0x00,0x00,0x00,0x00,0x30,0x21,
+0x10,0x40,0x00,0x03,0x26,0x52,0x00,0x04,0x00,0xe0,0x10,0x21,0x00,0x02,0x37,0xc3,
+0x02,0x00,0x20,0x21,0xaf,0xa9,0x00,0x10,0xaf,0xb4,0x00,0x14,0xaf,0xa8,0x00,0x18,
+0x0c,0x00,0x2b,0x0e,0xaf,0xb1,0x00,0x1c,0x08,0x00,0x2a,0x29,0x00,0x40,0x80,0x21,
+0x26,0x43,0x00,0x03,0x00,0x62,0x90,0x24,0x32,0x22,0x00,0x02,0x96,0x47,0x00,0x02,
+0x00,0x00,0x30,0x21,0x10,0x40,0xff,0xf2,0x26,0x52,0x00,0x04,0x00,0x07,0x14,0x00,
+0x08,0x00,0x2a,0x43,0x00,0x02,0x3c,0x03,0x26,0x42,0x00,0x03,0x24,0x03,0xff,0xfc,
+0x00,0x43,0x90,0x24,0x8e,0x47,0x00,0x00,0x00,0x00,0x30,0x21,0x08,0x00,0x2a,0x44,
+0x26,0x52,0x00,0x04,0x26,0x42,0x00,0x07,0x24,0x03,0xff,0xf8,0x00,0x43,0x90,0x24,
+0x8e,0x46,0x00,0x00,0x8e,0x47,0x00,0x04,0x08,0x00,0x2a,0x44,0x26,0x52,0x00,0x08,
+0x08,0x00,0x2a,0x31,0x36,0x31,0x00,0x02,0x26,0x44,0x00,0x03,0x24,0x02,0xff,0xfc,
+0x00,0x82,0x90,0x24,0x8e,0x44,0x00,0x00,0x02,0x15,0x10,0x23,0x26,0x52,0x00,0x04,
+0x08,0x00,0x29,0xbf,0xac,0x82,0x00,0x00,0x08,0x00,0x2a,0x31,0x24,0x09,0x00,0x08,
+0x24,0x02,0xff,0xff,0x12,0x82,0x00,0x11,0x00,0x00,0x00,0x00,0x26,0x43,0x00,0x03,
+0x24,0x02,0xff,0xfc,0x00,0x62,0x90,0x24,0x8e,0x47,0x00,0x00,0x02,0x00,0x20,0x21,
+0x24,0x02,0x00,0x10,0x00,0x00,0x30,0x21,0xaf,0xa2,0x00,0x10,0xaf,0xb4,0x00,0x14,
+0xaf,0xa8,0x00,0x18,0x0c,0x00,0x2b,0x0e,0xaf,0xb1,0x00,0x1c,0x8f,0xa5,0x00,0x44,
+0x00,0x40,0x80,0x21,0x08,0x00,0x29,0xbf,0x26,0x52,0x00,0x04,0x24,0x14,0x00,0x08,
+0x08,0x00,0x2a,0x73,0x36,0x31,0x00,0x01,0x26,0x42,0x00,0x03,0x24,0x03,0xff,0xfc,
+0x00,0x43,0x90,0x24,0x8e,0x53,0x00,0x00,0x00,0x00,0x00,0x00,0x12,0x60,0x00,0x23,
+0x26,0x52,0x00,0x04,0x02,0x60,0x20,0x21,0x0c,0x00,0x2b,0xdc,0x01,0x00,0x28,0x21,
+0x00,0x40,0x20,0x21,0x32,0x22,0x00,0x10,0x14,0x40,0x00,0x09,0x00,0x94,0x10,0x2a,
+0x10,0x40,0x00,0x07,0x26,0x94,0xff,0xff,0x24,0x03,0x00,0x20,0x00,0x94,0x10,0x2a,
+0xa2,0x03,0x00,0x00,0x26,0x94,0xff,0xff,0x14,0x40,0xff,0xfc,0x26,0x10,0x00,0x01,
+0x18,0x80,0x00,0x07,0x00,0x80,0x18,0x21,0x92,0x62,0x00,0x00,0x24,0x63,0xff,0xff,
+0x26,0x73,0x00,0x01,0xa2,0x02,0x00,0x00,0x14,0x60,0xff,0xfb,0x26,0x10,0x00,0x01,
+0x00,0x94,0x10,0x2a,0x10,0x40,0xff,0x83,0x26,0x94,0xff,0xff,0x24,0x03,0x00,0x20,
+0x00,0x94,0x10,0x2a,0xa2,0x03,0x00,0x00,0x26,0x94,0xff,0xff,0x14,0x40,0xff,0xfc,
+0x26,0x10,0x00,0x01,0x08,0x00,0x2a,0x29,0x00,0x00,0x00,0x00,0x3c,0x02,0x80,0x01,
+0x08,0x00,0x2a,0x8d,0x24,0x53,0x08,0x84,0x24,0x02,0x00,0x25,0xa2,0x02,0x00,0x00,
+0x8f,0xa5,0x00,0x44,0x00,0x00,0x00,0x00,0x80,0xa2,0x00,0x00,0x90,0xa3,0x00,0x00,
+0x10,0x40,0x00,0x03,0x26,0x10,0x00,0x01,0x08,0x00,0x29,0xbd,0xa2,0x03,0x00,0x00,
+0x24,0xa5,0xff,0xff,0x08,0x00,0x29,0xbf,0xaf,0xa5,0x00,0x44,0x80,0xa6,0x00,0x00,
+0x24,0xa5,0x00,0x01,0x08,0x00,0x2a,0x03,0xaf,0xa5,0x00,0x44,0x24,0xa5,0x00,0x01,
+0xaf,0xa5,0x00,0x44,0x90,0xa4,0x00,0x00,0x3c,0x02,0x80,0x01,0x24,0x42,0x02,0x14,
+0x00,0x44,0x10,0x21,0x90,0x43,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x63,0x00,0x04,
+0x14,0x60,0x00,0x0f,0x00,0x04,0x16,0x00,0x00,0x02,0x16,0x03,0x24,0x03,0x00,0x2a,
+0x10,0x43,0x00,0x04,0x26,0x42,0x00,0x03,0x29,0x02,0x00,0x00,0x08,0x00,0x29,0xf8,
+0x00,0x02,0x40,0x0b,0x24,0x03,0xff,0xfc,0x00,0x43,0x90,0x24,0x24,0xa5,0x00,0x01,
+0x8e,0x48,0x00,0x00,0xaf,0xa5,0x00,0x44,0x08,0x00,0x2a,0xd2,0x26,0x52,0x00,0x04,
+0x0c,0x00,0x2a,0xf2,0x27,0xa4,0x00,0x44,0x8f,0xa5,0x00,0x44,0x08,0x00,0x2a,0xd2,
+0x00,0x40,0x40,0x21,0x24,0x03,0xff,0xfc,0x00,0x43,0x90,0x24,0x8e,0x54,0x00,0x00,
+0x24,0xe5,0x00,0x01,0xaf,0xa5,0x00,0x44,0x06,0x81,0xff,0x0d,0x26,0x52,0x00,0x04,
+0x00,0x14,0xa0,0x23,0x08,0x00,0x29,0xf4,0x36,0x31,0x00,0x10,0x0c,0x00,0x2a,0xf2,
+0x27,0xa4,0x00,0x44,0x8f,0xa5,0x00,0x44,0x08,0x00,0x29,0xf4,0x00,0x40,0xa0,0x21,
+0x08,0x00,0x29,0xce,0x36,0x31,0x00,0x01,0x8c,0x86,0x00,0x00,0x3c,0x02,0x80,0x01,
+0x00,0x80,0x48,0x21,0x90,0xc3,0x00,0x00,0x24,0x44,0x02,0x14,0x00,0x64,0x18,0x21,
+0x90,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x04,0x10,0x40,0x00,0x10,
+0x00,0x00,0x38,0x21,0x00,0x80,0x40,0x21,0x24,0xc2,0x00,0x01,0x80,0xc5,0x00,0x00,
+0xad,0x22,0x00,0x00,0x90,0x43,0x00,0x00,0x00,0x40,0x30,0x21,0x00,0x07,0x10,0x80,
+0x00,0x68,0x18,0x21,0x90,0x64,0x00,0x00,0x00,0x47,0x10,0x21,0x00,0x02,0x10,0x40,
+0x00,0x45,0x10,0x21,0x30,0x84,0x00,0x04,0x14,0x80,0xff,0xf3,0x24,0x47,0xff,0xd0,
+0x03,0xe0,0x00,0x08,0x00,0xe0,0x10,0x21,0x27,0xbd,0xff,0x98,0xaf,0xb2,0x00,0x50,
+0x8f,0xb2,0x00,0x84,0x3c,0x02,0x80,0x01,0xaf,0xb4,0x00,0x58,0x32,0x43,0x00,0x40,
+0xaf,0xb1,0x00,0x4c,0xaf,0xb0,0x00,0x48,0xaf,0xb7,0x00,0x64,0xaf,0xb6,0x00,0x60,
+0xaf,0xb5,0x00,0x5c,0xaf,0xb3,0x00,0x54,0x00,0x80,0x68,0x21,0x00,0xc0,0x70,0x21,
+0x00,0xe0,0x78,0x21,0x8f,0xb0,0x00,0x78,0x8f,0xb8,0x00,0x7c,0x8f,0xb1,0x00,0x80,
+0x10,0x60,0x00,0x03,0x24,0x54,0x08,0x8c,0x3c,0x02,0x80,0x01,0x24,0x54,0x08,0xb4,
+0x32,0x42,0x00,0x10,0x10,0x40,0x00,0x04,0x26,0x02,0xff,0xfe,0x24,0x02,0xff,0xfe,
+0x02,0x42,0x90,0x24,0x26,0x02,0xff,0xfe,0x2c,0x42,0x00,0x23,0x10,0x40,0x00,0x5d,
+0x00,0x00,0x18,0x21,0x32,0x42,0x00,0x01,0x24,0x15,0x00,0x30,0x24,0x03,0x00,0x20,
+0x32,0x44,0x00,0x02,0x00,0x62,0xa8,0x0a,0x10,0x80,0x00,0x07,0x00,0x00,0xb8,0x21,
+0x05,0xc0,0x00,0x96,0x32,0x42,0x00,0x04,0x10,0x40,0x00,0x90,0x32,0x42,0x00,0x08,
+0x24,0x17,0x00,0x2b,0x27,0x18,0xff,0xff,0x32,0x56,0x00,0x20,0x12,0xc0,0x00,0x07,
+0x01,0xcf,0x10,0x25,0x24,0x02,0x00,0x10,0x12,0x02,0x00,0x86,0x27,0x03,0xff,0xff,
+0x3a,0x02,0x00,0x08,0x00,0x62,0xc0,0x0a,0x01,0xcf,0x10,0x25,0x14,0x40,0x00,0x55,
+0x00,0x00,0xc8,0x21,0x24,0x02,0x00,0x30,0x24,0x19,0x00,0x01,0xa3,0xa2,0x00,0x00,
+0x02,0x39,0x10,0x2a,0x03,0x22,0x88,0x0b,0x32,0x43,0x00,0x11,0x14,0x60,0x00,0x0a,
+0x03,0x11,0xc0,0x23,0x03,0x00,0x10,0x21,0x18,0x40,0x00,0x07,0x27,0x18,0xff,0xff,
+0x24,0x03,0x00,0x20,0x03,0x00,0x10,0x21,0xa1,0xa3,0x00,0x00,0x27,0x18,0xff,0xff,
+0x1c,0x40,0xff,0xfc,0x25,0xad,0x00,0x01,0x12,0xe0,0x00,0x03,0x00,0x00,0x00,0x00,
+0xa1,0xb7,0x00,0x00,0x25,0xad,0x00,0x01,0x12,0xc0,0x00,0x07,0x32,0x42,0x00,0x10,
+0x24,0x02,0x00,0x08,0x12,0x02,0x00,0x38,0x24,0x02,0x00,0x10,0x12,0x02,0x00,0x30,
+0x24,0x02,0x00,0x30,0x32,0x42,0x00,0x10,0x14,0x40,0x00,0x0a,0x03,0x31,0x10,0x2a,
+0x03,0x00,0x10,0x21,0x18,0x40,0x00,0x06,0x27,0x18,0xff,0xff,0x03,0x00,0x10,0x21,
+0xa1,0xb5,0x00,0x00,0x27,0x18,0xff,0xff,0x1c,0x40,0xff,0xfc,0x25,0xad,0x00,0x01,
+0x03,0x31,0x10,0x2a,0x10,0x40,0x00,0x07,0x26,0x31,0xff,0xff,0x24,0x03,0x00,0x30,
+0x03,0x31,0x10,0x2a,0xa1,0xa3,0x00,0x00,0x26,0x31,0xff,0xff,0x14,0x40,0xff,0xfc,
+0x25,0xad,0x00,0x01,0x03,0x20,0x10,0x21,0x18,0x40,0x00,0x08,0x27,0x39,0xff,0xff,
+0x03,0xb9,0x10,0x21,0x90,0x43,0x00,0x00,0x03,0x20,0x20,0x21,0x27,0x39,0xff,0xff,
+0xa1,0xa3,0x00,0x00,0x1c,0x80,0xff,0xfa,0x25,0xad,0x00,0x01,0x03,0x00,0x10,0x21,
+0x18,0x40,0x00,0x07,0x27,0x18,0xff,0xff,0x24,0x03,0x00,0x20,0x03,0x00,0x10,0x21,
+0xa1,0xa3,0x00,0x00,0x27,0x18,0xff,0xff,0x1c,0x40,0xff,0xfc,0x25,0xad,0x00,0x01,
+0x01,0xa0,0x18,0x21,0x7b,0xb6,0x03,0x3c,0x7b,0xb4,0x02,0xfc,0x7b,0xb2,0x02,0xbc,
+0x7b,0xb0,0x02,0x7c,0x00,0x60,0x10,0x21,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x68,
+0xa1,0xa2,0x00,0x00,0x92,0x83,0x00,0x21,0x25,0xad,0x00,0x01,0xa1,0xa3,0x00,0x00,
+0x08,0x00,0x2b,0x61,0x25,0xad,0x00,0x01,0x24,0x02,0x00,0x30,0x08,0x00,0x2b,0x94,
+0xa1,0xa2,0x00,0x00,0x01,0xcf,0x10,0x25,0x10,0x40,0xff,0xad,0x00,0x00,0x60,0x21,
+0x00,0x0e,0x18,0x02,0x03,0x3d,0x98,0x21,0x00,0x60,0x20,0x21,0x01,0xe0,0x38,0x21,
+0x10,0x60,0x00,0x04,0x27,0x39,0x00,0x01,0x00,0x70,0x00,0x1b,0x00,0x00,0x20,0x12,
+0x00,0x00,0x18,0x10,0x00,0x80,0x48,0x21,0x00,0xe0,0x30,0x21,0x01,0x80,0x70,0x21,
+0x01,0x80,0x28,0x21,0x10,0x00,0x00,0x06,0x24,0x04,0x00,0x21,0x00,0x03,0x08,0x40,
+0x00,0x03,0x2f,0xc2,0x00,0x22,0x18,0x25,0x00,0x06,0x30,0x40,0x00,0x0e,0x70,0x40,
+0x14,0xa0,0x00,0x02,0x00,0x70,0x10,0x2b,0x14,0x40,0x00,0x03,0x24,0x84,0xff,0xff,
+0x00,0x70,0x18,0x23,0x25,0xce,0x00,0x01,0x14,0x80,0xff,0xf4,0x00,0x06,0x17,0xc2,
+0x02,0x83,0x18,0x21,0x01,0xc0,0x38,0x21,0x00,0x00,0x50,0x21,0x00,0x09,0x20,0x00,
+0x00,0x00,0x28,0x21,0x90,0x66,0x00,0x00,0x00,0x8a,0x70,0x25,0x00,0xa7,0x78,0x25,
+0x01,0xcf,0x10,0x25,0x14,0x40,0xff,0xda,0xa2,0x66,0x00,0x00,0x08,0x00,0x2b,0x49,
+0x02,0x39,0x10,0x2a,0x08,0x00,0x2b,0x42,0x27,0x18,0xff,0xfe,0x10,0x40,0xff,0x73,
+0x32,0x56,0x00,0x20,0x08,0x00,0x2b,0x39,0x24,0x17,0x00,0x20,0x00,0x0f,0x78,0x23,
+0x00,0x0e,0x70,0x23,0x00,0x0f,0x10,0x2b,0x01,0xc2,0x70,0x23,0x08,0x00,0x2b,0x39,
+0x24,0x17,0x00,0x2d,0x80,0x82,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x06,
+0x00,0x80,0x18,0x21,0x24,0x63,0x00,0x01,0x80,0x62,0x00,0x00,0x00,0x00,0x00,0x00,
+0x14,0x40,0xff,0xfc,0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,0x00,0x64,0x10,0x23,
+0x24,0xa5,0xff,0xff,0x24,0x02,0xff,0xff,0x10,0xa2,0x00,0x0d,0x00,0x80,0x18,0x21,
+0x80,0x82,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x09,0x00,0x00,0x00,0x00,
+0x24,0x06,0xff,0xff,0x24,0xa5,0xff,0xff,0x10,0xa6,0x00,0x05,0x24,0x63,0x00,0x01,
+0x80,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x14,0x40,0xff,0xfa,0x00,0x00,0x00,0x00,
+0x03,0xe0,0x00,0x08,0x00,0x64,0x10,0x23,0x80,0x82,0x00,0x00,0x90,0x88,0x00,0x00,
+0x10,0x40,0x00,0x17,0x00,0x00,0x48,0x21,0x90,0xa3,0x00,0x00,0x00,0xa0,0x30,0x21,
+0x10,0x60,0x00,0x0b,0x00,0x60,0x38,0x21,0x00,0x08,0x16,0x00,0x00,0x02,0x46,0x03,
+0x00,0x07,0x16,0x00,0x00,0x02,0x16,0x03,0x11,0x02,0x00,0x05,0x24,0xc6,0x00,0x01,
+0x90,0xc3,0x00,0x00,0x00,0x00,0x00,0x00,0x14,0x60,0xff,0xf9,0x00,0x60,0x38,0x21,
+0x00,0x03,0x16,0x00,0x10,0x40,0x00,0x06,0x00,0x00,0x00,0x00,0x24,0x84,0x00,0x01,
+0x90,0x82,0x00,0x00,0x25,0x29,0x00,0x01,0x14,0x40,0xff,0xeb,0x00,0x40,0x40,0x21,
+0x03,0xe0,0x00,0x08,0x01,0x20,0x10,0x21,0x80,0x82,0x00,0x00,0x90,0x87,0x00,0x00,
+0x10,0x40,0x00,0x17,0x00,0x00,0x18,0x21,0x90,0xa2,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x02,0x1e,0x00,0x10,0x60,0x00,0x0c,0x00,0xa0,0x30,0x21,0x00,0x07,0x16,0x00,
+0x00,0x02,0x3e,0x03,0x00,0x03,0x16,0x03,0x10,0xe2,0x00,0x0d,0x00,0x80,0x18,0x21,
+0x24,0xc6,0x00,0x01,0x90,0xc2,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x1e,0x00,
+0x14,0x60,0xff,0xf9,0x00,0x03,0x16,0x03,0x24,0x84,0x00,0x01,0x90,0x82,0x00,0x00,
+0x00,0x00,0x00,0x00,0x14,0x40,0xff,0xec,0x00,0x40,0x38,0x21,0x00,0x00,0x18,0x21,
+0x03,0xe0,0x00,0x08,0x00,0x60,0x10,0x21,0x27,0xbd,0xff,0xe0,0xaf,0xb0,0x00,0x10,
+0x8f,0x90,0xc2,0x58,0xaf,0xb1,0x00,0x14,0xaf,0xbf,0x00,0x18,0x00,0x84,0x80,0x0b,
+0x00,0x00,0x30,0x21,0x12,0x00,0x00,0x0a,0x00,0xa0,0x88,0x21,0x0c,0x00,0x2b,0xee,
+0x02,0x00,0x20,0x21,0x02,0x02,0x80,0x21,0x82,0x02,0x00,0x00,0x02,0x20,0x28,0x21,
+0x02,0x00,0x20,0x21,0x14,0x40,0x00,0x07,0x00,0x00,0x30,0x21,0xaf,0x80,0xc2,0x58,
+0x8f,0xbf,0x00,0x18,0x7b,0xb0,0x00,0xbc,0x00,0xc0,0x10,0x21,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x20,0x0c,0x00,0x2c,0x0a,0x00,0x00,0x00,0x00,0x00,0x40,0x18,0x21,
+0x10,0x40,0x00,0x07,0x02,0x00,0x30,0x21,0x80,0x42,0x00,0x00,0x00,0x00,0x00,0x00,
+0x10,0x40,0x00,0x03,0x00,0x00,0x00,0x00,0xa0,0x60,0x00,0x00,0x24,0x63,0x00,0x01,
+0xaf,0x83,0xc2,0x58,0x08,0x00,0x2c,0x38,0x00,0x00,0x00,0x00,0x24,0xc6,0xff,0xff,
+0x24,0x02,0xff,0xff,0x10,0xc2,0x00,0x05,0x00,0x80,0x18,0x21,0x24,0xc6,0xff,0xff,
+0xa0,0x65,0x00,0x00,0x14,0xc2,0xff,0xfd,0x24,0x63,0x00,0x01,0x03,0xe0,0x00,0x08,
+0x00,0x80,0x10,0x21,0x24,0xc6,0xff,0xff,0x24,0x02,0xff,0xff,0x10,0xc2,0x00,0x08,
+0x00,0x80,0x18,0x21,0x24,0x07,0xff,0xff,0x90,0xa2,0x00,0x00,0x24,0xc6,0xff,0xff,
+0x24,0xa5,0x00,0x01,0xa0,0x62,0x00,0x00,0x14,0xc7,0xff,0xfb,0x24,0x63,0x00,0x01,
+0x03,0xe0,0x00,0x08,0x00,0x80,0x10,0x21,0x00,0x80,0x18,0x21,0x90,0xa2,0x00,0x00,
+0x24,0xa5,0x00,0x01,0xa0,0x82,0x00,0x00,0x14,0x40,0xff,0xfc,0x24,0x84,0x00,0x01,
+0x03,0xe0,0x00,0x08,0x00,0x60,0x10,0x21,0x90,0x83,0x00,0x00,0x90,0xa2,0x00,0x00,
+0x24,0x84,0x00,0x01,0x00,0x62,0x10,0x23,0x00,0x02,0x16,0x00,0x00,0x02,0x16,0x03,
+0x14,0x40,0x00,0x03,0x24,0xa5,0x00,0x01,0x14,0x60,0xff,0xf7,0x00,0x00,0x00,0x00,
+0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,0x00,0x00,0x10,0x21,
+0x3c,0x05,0xb0,0x03,0x3c,0x02,0x80,0x01,0x34,0xa5,0x00,0x20,0x24,0x42,0xb1,0xe0,
+0xac,0xa2,0x00,0x00,0x24,0x02,0x00,0x02,0x24,0x03,0x00,0x20,0xac,0x82,0x00,0x64,
+0x3c,0x02,0x80,0x01,0xac,0x83,0x00,0x60,0xac,0x80,0x00,0x00,0xac,0x80,0x00,0x04,
+0xac,0x80,0x00,0x08,0xac,0x80,0x00,0x4c,0xac,0x80,0x00,0x50,0xac,0x80,0x00,0x54,
+0xac,0x80,0x00,0x0c,0xac,0x80,0x00,0x58,0xa0,0x80,0x00,0x5c,0x24,0x42,0xb2,0xb0,
+0x24,0x83,0x00,0x68,0x24,0x05,0x00,0x0f,0x24,0xa5,0xff,0xff,0xac,0x62,0x00,0x00,
+0x04,0xa1,0xff,0xfd,0x24,0x63,0x00,0x04,0x3c,0x02,0x80,0x01,0x3c,0x03,0x80,0x01,
+0x24,0x42,0xb3,0xe0,0x24,0x63,0xb4,0x44,0xac,0x82,0x00,0x78,0xac,0x83,0x00,0x84,
+0x3c,0x02,0x80,0x01,0x3c,0x03,0x80,0x01,0x24,0x42,0xb5,0x6c,0x24,0x63,0xb4,0xd8,
+0xac,0x82,0x00,0x88,0xac,0x83,0x00,0x98,0x3c,0x02,0x80,0x01,0x3c,0x03,0x80,0x01,
+0x24,0x42,0xb6,0x14,0x24,0x63,0xb6,0xd4,0xac,0x82,0x00,0xa0,0xac,0x83,0x00,0xa4,
+0xa0,0x80,0x01,0xba,0xac,0x80,0x01,0xa8,0xac,0x80,0x01,0xac,0xac,0x80,0x01,0xb0,
+0xac,0x80,0x01,0xb4,0xa0,0x80,0x01,0xb8,0x03,0xe0,0x00,0x08,0xa0,0x80,0x01,0xb9,
+0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x01,0x34,0x63,0x00,0x20,0x24,0x42,0xb2,0xb0,
+0x03,0xe0,0x00,0x08,0xac,0x62,0x00,0x00,0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x01,
+0x27,0xbd,0xff,0xe8,0x34,0x63,0x00,0x20,0x24,0x42,0xb2,0xc8,0xaf,0xb0,0x00,0x10,
+0xac,0x62,0x00,0x00,0xaf,0xbf,0x00,0x14,0x8c,0x83,0x00,0x10,0x8f,0x82,0x91,0xe8,
+0x00,0x80,0x80,0x21,0x3c,0x04,0x80,0x01,0x30,0x46,0x00,0x01,0x10,0x60,0x00,0x11,
+0x24,0x84,0x08,0xdc,0x8e,0x02,0x00,0x14,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x0d,
+0x00,0x00,0x00,0x00,0x8e,0x05,0x00,0x10,0x8e,0x03,0x00,0x14,0x8e,0x02,0x00,0x04,
+0x00,0xa3,0x28,0x21,0x00,0x45,0x10,0x21,0x30,0x43,0x00,0xff,0x00,0x03,0x18,0x2b,
+0x00,0x02,0x12,0x02,0x00,0x43,0x10,0x21,0x00,0x02,0x12,0x00,0x30,0x42,0x3f,0xff,
+0xae,0x02,0x00,0x04,0x14,0xc0,0x00,0x0a,0x00,0x00,0x00,0x00,0xae,0x00,0x00,0x00,
+0xae,0x00,0x00,0x4c,0xae,0x00,0x00,0x50,0xae,0x00,0x00,0x54,0xae,0x00,0x00,0x0c,
+0x8f,0xbf,0x00,0x14,0x8f,0xb0,0x00,0x10,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x18,
+0x8e,0x05,0x00,0x10,0x8e,0x07,0x00,0x04,0x8e,0x06,0x00,0x14,0x0c,0x00,0x17,0x9d,
+0x00,0x00,0x00,0x00,0x08,0x00,0x2c,0xd4,0xae,0x00,0x00,0x00,0x3c,0x03,0xb0,0x03,
+0x3c,0x02,0x80,0x01,0x34,0x63,0x00,0x20,0x24,0x42,0xb3,0x8c,0xac,0x62,0x00,0x00,
+0x8c,0x86,0x00,0x04,0x3c,0x02,0xb0,0x01,0x24,0x03,0x00,0x01,0x00,0xc2,0x10,0x21,
+0x8c,0x45,0x00,0x00,0xac,0x83,0x00,0x4c,0x00,0x05,0x14,0x02,0x30,0xa3,0x3f,0xff,
+0x30,0x42,0x00,0xff,0xac,0x83,0x00,0x10,0xac,0x82,0x00,0x14,0x8c,0x83,0x00,0x14,
+0xac,0x85,0x00,0x40,0x00,0xc3,0x30,0x21,0x03,0xe0,0x00,0x08,0xac,0x86,0x00,0x08,
+0x3c,0x02,0xb0,0x03,0x3c,0x03,0x80,0x01,0x27,0xbd,0xff,0xe8,0x34,0x42,0x00,0x20,
+0x24,0x63,0xb3,0xe0,0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x14,0xac,0x43,0x00,0x00,
+0x8c,0x82,0x00,0x4c,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x0a,0x00,0x80,0x80,0x21,
+0xae,0x00,0x00,0x00,0xae,0x00,0x00,0x4c,0xae,0x00,0x00,0x50,0xae,0x00,0x00,0x54,
+0xae,0x00,0x00,0x0c,0x8f,0xbf,0x00,0x14,0x8f,0xb0,0x00,0x10,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x18,0x0c,0x00,0x2c,0xe3,0x00,0x00,0x00,0x00,0x08,0x00,0x2d,0x05,
+0xae,0x00,0x00,0x00,0x3c,0x02,0xb0,0x03,0x3c,0x03,0x80,0x01,0x27,0xbd,0xff,0xe8,
+0x34,0x42,0x00,0x20,0x24,0x63,0xb4,0x44,0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x14,
+0xac,0x43,0x00,0x00,0x8c,0x82,0x00,0x4c,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x16,
+0x00,0x80,0x80,0x21,0x8e,0x03,0x00,0x08,0x3c,0x02,0xb0,0x01,0x8e,0x04,0x00,0x44,
+0x00,0x62,0x18,0x21,0x90,0x65,0x00,0x00,0x24,0x02,0x00,0x01,0xae,0x02,0x00,0x50,
+0x30,0xa3,0x00,0xff,0x00,0x03,0x10,0x82,0x00,0x04,0x23,0x02,0x30,0x84,0x00,0x0f,
+0x30,0x42,0x00,0x03,0x00,0x03,0x19,0x02,0xae,0x04,0x00,0x34,0xae,0x02,0x00,0x2c,
+0xae,0x03,0x00,0x30,0xa2,0x05,0x00,0x48,0x8f,0xbf,0x00,0x14,0x8f,0xb0,0x00,0x10,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x18,0x0c,0x00,0x2c,0xe3,0x00,0x00,0x00,0x00,
+0x08,0x00,0x2d,0x1d,0x00,0x00,0x00,0x00,0x3c,0x02,0xb0,0x03,0x3c,0x03,0x80,0x01,
+0x27,0xbd,0xff,0xe8,0x34,0x42,0x00,0x20,0x24,0x63,0xb4,0xd8,0xaf,0xb0,0x00,0x10,
+0xaf,0xbf,0x00,0x14,0xac,0x43,0x00,0x00,0x8c,0x82,0x00,0x50,0x00,0x00,0x00,0x00,
+0x10,0x40,0x00,0x16,0x00,0x80,0x80,0x21,0x92,0x03,0x00,0x44,0x8e,0x02,0x00,0x40,
+0x83,0x85,0x92,0x15,0x92,0x04,0x00,0x41,0x30,0x63,0x00,0x01,0x00,0x02,0x16,0x02,
+0xae,0x04,0x00,0x14,0x00,0x00,0x30,0x21,0xae,0x02,0x00,0x18,0x10,0xa0,0x00,0x04,
+0xae,0x03,0x00,0x3c,0x10,0x60,0x00,0x03,0x24,0x02,0x00,0x01,0x24,0x06,0x00,0x01,
+0x24,0x02,0x00,0x01,0xa3,0x86,0x92,0x15,0x8f,0xbf,0x00,0x14,0xae,0x02,0x00,0x54,
+0x8f,0xb0,0x00,0x10,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x18,0x0c,0x00,0x2d,0x11,
+0x00,0x00,0x00,0x00,0x08,0x00,0x2d,0x42,0x00,0x00,0x00,0x00,0x3c,0x02,0xb0,0x03,
+0x3c,0x03,0x80,0x01,0x27,0xbd,0xff,0xe8,0x34,0x42,0x00,0x20,0x24,0x63,0xb5,0x6c,
+0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x14,0xac,0x43,0x00,0x00,0x8c,0x82,0x00,0x50,
+0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x1b,0x00,0x80,0x80,0x21,0x3c,0x02,0xb0,0x03,
+0x8c,0x42,0x00,0x00,0x92,0x04,0x00,0x44,0x8e,0x03,0x00,0x40,0x83,0x86,0x92,0x15,
+0x92,0x05,0x00,0x41,0x30,0x42,0x08,0x00,0x30,0x84,0x00,0x01,0x00,0x02,0x12,0xc2,
+0x00,0x03,0x1e,0x02,0x00,0x82,0x20,0x25,0xae,0x05,0x00,0x14,0x00,0x00,0x38,0x21,
+0xae,0x03,0x00,0x18,0x10,0xc0,0x00,0x04,0xae,0x04,0x00,0x3c,0x10,0x80,0x00,0x03,
+0x24,0x02,0x00,0x01,0x24,0x07,0x00,0x01,0x24,0x02,0x00,0x01,0xa3,0x87,0x92,0x15,
+0x8f,0xbf,0x00,0x14,0xae,0x02,0x00,0x54,0x8f,0xb0,0x00,0x10,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x18,0x0c,0x00,0x2d,0x11,0x00,0x00,0x00,0x00,0x08,0x00,0x2d,0x67,
+0x00,0x00,0x00,0x00,0x3c,0x02,0xb0,0x03,0x3c,0x03,0x80,0x01,0x27,0xbd,0xff,0xe8,
+0x34,0x42,0x00,0x20,0x24,0x63,0xb6,0x14,0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x14,
+0xac,0x43,0x00,0x00,0x8c,0x82,0x00,0x54,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x21,
+0x00,0x80,0x80,0x21,0x8e,0x05,0x00,0x04,0x8e,0x04,0x00,0x44,0x3c,0x03,0x80,0x00,
+0x34,0x63,0x00,0x10,0x3c,0x02,0xb0,0x01,0x00,0xa2,0x28,0x21,0x00,0x83,0x20,0x25,
+0xac,0xa4,0x00,0x04,0x8e,0x03,0x01,0xac,0x8e,0x08,0x00,0x04,0x3c,0x07,0xb0,0x03,
+0x24,0x66,0x00,0x01,0x28,0xc5,0x00,0x00,0x24,0x62,0x00,0x40,0x00,0xc5,0x10,0x0a,
+0x00,0x02,0x11,0x83,0x00,0x02,0x11,0x80,0x00,0x03,0x18,0x80,0x00,0xc2,0x30,0x23,
+0x00,0x70,0x18,0x21,0xae,0x06,0x01,0xac,0x34,0xe7,0x00,0x30,0xac,0x68,0x00,0xa8,
+0x8c,0xe2,0x00,0x00,0x02,0x00,0x20,0x21,0x24,0x42,0x00,0x01,0x0c,0x00,0x2c,0xb2,
+0xac,0xe2,0x00,0x00,0x8f,0xbf,0x00,0x14,0x8f,0xb0,0x00,0x10,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x18,0x0c,0x00,0x2d,0x5b,0x00,0x00,0x00,0x00,0x08,0x00,0x2d,0x91,
+0x00,0x00,0x00,0x00,0x3c,0x02,0xb0,0x03,0x3c,0x03,0x80,0x01,0x27,0xbd,0xff,0xe8,
+0x34,0x42,0x00,0x20,0x24,0x63,0xb6,0xd4,0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x14,
+0xac,0x43,0x00,0x00,0x8c,0x82,0x00,0x54,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x21,
+0x00,0x80,0x80,0x21,0x8e,0x05,0x00,0x04,0x8e,0x04,0x00,0x44,0x3c,0x03,0x80,0x00,
+0x34,0x63,0x00,0x10,0x3c,0x02,0xb0,0x01,0x00,0xa2,0x28,0x21,0x00,0x83,0x20,0x25,
+0xac,0xa4,0x00,0x04,0x8e,0x03,0x01,0xac,0x8e,0x08,0x00,0x04,0x3c,0x07,0xb0,0x03,
+0x24,0x66,0x00,0x01,0x28,0xc5,0x00,0x00,0x24,0x62,0x00,0x40,0x00,0xc5,0x10,0x0a,
+0x00,0x02,0x11,0x83,0x00,0x02,0x11,0x80,0x00,0x03,0x18,0x80,0x00,0xc2,0x30,0x23,
+0x00,0x70,0x18,0x21,0xae,0x06,0x01,0xac,0x34,0xe7,0x00,0x30,0xac,0x68,0x00,0xa8,
+0x8c,0xe2,0x00,0x00,0x02,0x00,0x20,0x21,0x24,0x42,0x00,0x01,0x0c,0x00,0x2c,0xb2,
+0xac,0xe2,0x00,0x00,0x8f,0xbf,0x00,0x14,0x8f,0xb0,0x00,0x10,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x18,0x0c,0x00,0x2d,0x5b,0x00,0x00,0x00,0x00,0x08,0x00,0x2d,0xc1,
+0x00,0x00,0x00,0x00,0x3c,0x02,0xb0,0x03,0x3c,0x03,0x80,0x01,0x34,0x42,0x00,0x20,
+0x24,0x63,0xb7,0x94,0x27,0xbd,0xff,0xe0,0xac,0x43,0x00,0x00,0x3c,0x02,0x80,0x01,
+0xaf,0xb1,0x00,0x14,0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x18,0x00,0x80,0x80,0x21,
+0x24,0x51,0xb2,0xb0,0x3c,0x03,0xb0,0x09,0x34,0x63,0x00,0x06,0x8e,0x07,0x00,0x04,
+0x90,0x62,0x00,0x00,0x00,0x07,0x22,0x02,0x00,0x44,0x10,0x23,0x24,0x44,0x00,0x40,
+0x28,0x83,0x00,0x00,0x24,0x42,0x00,0x7f,0x00,0x83,0x10,0x0a,0x00,0x02,0x11,0x83,
+0x00,0x02,0x11,0x80,0x24,0x84,0xff,0xff,0x10,0x44,0x00,0x5f,0x00,0x00,0x40,0x21,
+0x3c,0x02,0xb0,0x01,0x00,0xe2,0x10,0x21,0x8c,0x44,0x00,0x04,0x3c,0x03,0x7c,0x00,
+0x34,0x63,0x00,0xf0,0x00,0x83,0x18,0x24,0xae,0x04,0x00,0x44,0x8c,0x44,0x00,0x00,
+0x10,0x60,0x00,0x60,0x00,0x00,0x48,0x21,0x24,0xe2,0x01,0x00,0x30,0x45,0x3f,0xff,
+0x3c,0x03,0xb0,0x01,0xae,0x05,0x00,0x04,0x00,0xa3,0x18,0x21,0x8c,0x64,0x00,0x04,
+0x3c,0x02,0x7c,0x00,0x34,0x42,0x00,0xf0,0x00,0x82,0x30,0x24,0xae,0x04,0x00,0x44,
+0x25,0x08,0x00,0x01,0x24,0x02,0x00,0x40,0x00,0xa0,0x38,0x21,0x8c,0x64,0x00,0x00,
+0x11,0x02,0x00,0x30,0x24,0x09,0x00,0x01,0x3c,0x02,0xff,0xff,0x14,0xc0,0xff,0xee,
+0x00,0x82,0x18,0x24,0x3c,0x02,0x28,0x38,0x14,0x62,0xff,0xec,0x24,0xe2,0x01,0x00,
+0x24,0x02,0x00,0x01,0x11,0x22,0x00,0x2e,0x3c,0x03,0xb0,0x09,0x8e,0x02,0x00,0x44,
+0x8e,0x04,0x00,0x60,0x00,0x02,0x1e,0x42,0x00,0x02,0x12,0x02,0x30,0x42,0x00,0x0f,
+0x30,0x63,0x00,0x01,0xae,0x02,0x00,0x00,0x10,0x44,0x00,0x1a,0xae,0x03,0x00,0x58,
+0x8e,0x02,0x00,0x64,0x8e,0x04,0x00,0x58,0x00,0x00,0x00,0x00,0x10,0x82,0x00,0x05,
+0x00,0x00,0x00,0x00,0xae,0x00,0x00,0x4c,0xae,0x00,0x00,0x50,0xae,0x00,0x00,0x54,
+0xae,0x00,0x00,0x0c,0x8e,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x10,0x80,
+0x00,0x50,0x10,0x21,0x8c,0x42,0x00,0x68,0x00,0x00,0x00,0x00,0x10,0x51,0x00,0x06,
+0x00,0x00,0x00,0x00,0x00,0x40,0xf8,0x09,0x02,0x00,0x20,0x21,0x8e,0x04,0x00,0x58,
+0x8e,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0xae,0x03,0x00,0x60,0x08,0x00,0x2d,0xf1,
+0xae,0x04,0x00,0x64,0x8e,0x02,0x00,0x64,0x00,0x00,0x00,0x00,0x14,0x62,0xff,0xe5,
+0x00,0x00,0x00,0x00,0x7a,0x02,0x0d,0x7c,0x8f,0xbf,0x00,0x18,0x7b,0xb0,0x00,0xbc,
+0x00,0x43,0x10,0x26,0x00,0x02,0x10,0x2b,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x20,
+0x34,0x63,0x00,0x06,0x8e,0x04,0x00,0x04,0x90,0x62,0x00,0x00,0x00,0x04,0x22,0x02,
+0x00,0x44,0x10,0x23,0x24,0x44,0x00,0x40,0x28,0x83,0x00,0x00,0x24,0x42,0x00,0x7f,
+0x00,0x83,0x10,0x0a,0x00,0x02,0x11,0x83,0x00,0x02,0x11,0x80,0x00,0x82,0x20,0x23,
+0x14,0x89,0xff,0xc6,0x00,0x00,0x00,0x00,0x8e,0x03,0x00,0x00,0x00,0x00,0x00,0x00,
+0x2c,0x62,0x00,0x03,0x14,0x40,0x00,0x05,0x24,0x02,0x00,0x0d,0x10,0x62,0x00,0x03,
+0x24,0x02,0x00,0x01,0x08,0x00,0x2e,0x49,0xa2,0x02,0x00,0x5c,0x08,0x00,0x2e,0x49,
+0xa2,0x00,0x00,0x5c,0x3c,0x02,0xff,0xff,0x00,0x82,0x10,0x24,0x3c,0x03,0x28,0x38,
+0x14,0x43,0xff,0x9d,0x24,0x02,0x00,0x01,0x08,0x00,0x2e,0x21,0x00,0x00,0x00,0x00,
+0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x01,0x34,0x63,0x00,0x20,0x24,0x42,0xb9,0xc0,
+0xac,0x62,0x00,0x00,0x8c,0x83,0x01,0xa8,0x3c,0x05,0xb0,0x06,0x34,0xa5,0x80,0x18,
+0x00,0x03,0x18,0x80,0x00,0x64,0x18,0x21,0x8c,0x62,0x00,0xa8,0x3c,0x03,0x00,0x80,
+0x00,0x02,0x10,0xc2,0x00,0x02,0x12,0x00,0x00,0x43,0x10,0x25,0xac,0xa2,0x00,0x00,
+0x8c,0x83,0x01,0xa8,0x8c,0x82,0x01,0xac,0x24,0x66,0x00,0x01,0x28,0xc5,0x00,0x00,
+0x24,0x63,0x00,0x40,0x00,0xc5,0x18,0x0a,0x00,0x03,0x19,0x83,0x00,0x03,0x19,0x80,
+0x00,0xc3,0x30,0x23,0x00,0xc2,0x10,0x26,0x00,0x02,0x10,0x2b,0x03,0xe0,0x00,0x08,
+0xac,0x86,0x01,0xa8,0x90,0x87,0x00,0x00,0x3c,0x02,0x80,0x01,0x27,0xbd,0xff,0xe8,
+0x24,0x48,0x02,0x14,0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x14,0x01,0x07,0x18,0x21,
+0x90,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x20,0x10,0x40,0x00,0x0a,
+0x00,0x00,0x80,0x21,0x24,0x84,0x00,0x01,0x90,0x87,0x00,0x00,0x00,0x00,0x00,0x00,
+0x01,0x07,0x18,0x21,0x90,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x20,
+0x14,0x40,0xff,0xf8,0x00,0x00,0x00,0x00,0x00,0x07,0x16,0x00,0x00,0x02,0x16,0x03,
+0x24,0x03,0x00,0x2d,0x10,0x43,0x00,0x0f,0x00,0x00,0x00,0x00,0x0c,0x00,0x2e,0xb8,
+0x00,0x00,0x00,0x00,0x00,0x40,0x18,0x21,0x00,0x02,0x10,0x23,0x04,0x61,0x00,0x05,
+0x00,0x70,0x10,0x0a,0x16,0x00,0x00,0x03,0x3c,0x02,0x80,0x00,0x3c,0x02,0x7f,0xff,
+0x34,0x42,0xff,0xff,0x8f,0xbf,0x00,0x14,0x8f,0xb0,0x00,0x10,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x18,0x24,0x10,0xff,0xff,0x08,0x00,0x2e,0xa7,0x24,0x84,0x00,0x01,
+0x00,0x80,0x38,0x21,0x90,0x84,0x00,0x00,0x3c,0x02,0x80,0x01,0x24,0x48,0x02,0x14,
+0x01,0x04,0x18,0x21,0x90,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x20,
+0x10,0x40,0x00,0x0a,0x00,0x00,0x50,0x21,0x24,0xe7,0x00,0x01,0x90,0xe4,0x00,0x00,
+0x00,0x00,0x00,0x00,0x01,0x04,0x18,0x21,0x90,0x62,0x00,0x00,0x00,0x00,0x00,0x00,
+0x30,0x42,0x00,0x20,0x14,0x40,0xff,0xf8,0x00,0x00,0x00,0x00,0x00,0x04,0x16,0x00,
+0x00,0x02,0x16,0x03,0x38,0x42,0x00,0x2b,0x24,0xe3,0x00,0x01,0x24,0x04,0x00,0x10,
+0x10,0xc4,0x00,0x38,0x00,0x62,0x38,0x0a,0x90,0xe4,0x00,0x00,0x14,0xc0,0x00,0x07,
+0x00,0x80,0x18,0x21,0x00,0x04,0x16,0x00,0x00,0x02,0x16,0x03,0x24,0x03,0x00,0x30,
+0x10,0x43,0x00,0x25,0x24,0x06,0x00,0x0a,0x00,0x80,0x18,0x21,0x00,0x03,0x16,0x00,
+0x10,0x40,0x00,0x1a,0x30,0x64,0x00,0xff,0x24,0x82,0xff,0xa9,0x2c,0x83,0x00,0x61,
+0x30,0x48,0x00,0xff,0x10,0x60,0x00,0x09,0x2c,0x89,0x00,0x41,0x24,0x82,0xff,0xc9,
+0x30,0x48,0x00,0xff,0x11,0x20,0x00,0x05,0x2c,0x83,0x00,0x3a,0x24,0x82,0xff,0xd0,
+0x14,0x60,0x00,0x02,0x30,0x48,0x00,0xff,0x24,0x08,0x00,0xff,0x01,0x06,0x10,0x2a,
+0x10,0x40,0x00,0x0a,0x01,0x46,0x00,0x18,0x24,0xe7,0x00,0x01,0x00,0x00,0x18,0x12,
+0x00,0x6a,0x10,0x2b,0x14,0x40,0x00,0x0a,0x00,0x68,0x50,0x21,0x80,0xe2,0x00,0x00,
+0x90,0xe3,0x00,0x00,0x14,0x40,0xff,0xe8,0x30,0x64,0x00,0xff,0x10,0xa0,0x00,0x02,
+0x00,0x00,0x00,0x00,0xac,0xa7,0x00,0x00,0x03,0xe0,0x00,0x08,0x01,0x40,0x10,0x21,
+0x03,0xe0,0x00,0x08,0x24,0x02,0xff,0xff,0x24,0x06,0x00,0x08,0x80,0xe3,0x00,0x01,
+0x24,0x02,0x00,0x78,0x10,0x62,0x00,0x03,0x24,0x02,0x00,0x58,0x14,0x62,0xff,0xd7,
+0x00,0x80,0x18,0x21,0x24,0xe7,0x00,0x02,0x90,0xe4,0x00,0x00,0x08,0x00,0x2e,0xda,
+0x24,0x06,0x00,0x10,0x80,0xe3,0x00,0x00,0x24,0x02,0x00,0x30,0x90,0xe4,0x00,0x00,
+0x10,0x62,0xff,0xf2,0x00,0x00,0x00,0x00,0x08,0x00,0x2e,0xd3,0x00,0x00,0x00,0x00,
+0x3c,0x04,0xb0,0x03,0x3c,0x06,0xb0,0x07,0x3c,0x02,0x80,0x01,0x34,0xc6,0x00,0x18,
+0x34,0x84,0x00,0x20,0x24,0x42,0xbc,0x40,0x24,0x03,0xff,0x83,0xac,0x82,0x00,0x00,
+0xa0,0xc3,0x00,0x00,0x90,0xc4,0x00,0x00,0x27,0xbd,0xff,0xf8,0x3c,0x03,0xb0,0x07,
+0x24,0x02,0xff,0x82,0xa3,0xa4,0x00,0x00,0xa0,0x62,0x00,0x00,0x90,0x64,0x00,0x00,
+0x3c,0x02,0xb0,0x07,0x34,0x42,0x00,0x08,0xa3,0xa4,0x00,0x01,0xa0,0x40,0x00,0x00,
+0x90,0x43,0x00,0x00,0x24,0x02,0x00,0x03,0x3c,0x05,0xb0,0x07,0xa3,0xa3,0x00,0x00,
+0xa0,0xc2,0x00,0x00,0x90,0xc4,0x00,0x00,0x34,0xa5,0x00,0x10,0x24,0x02,0x00,0x06,
+0x3c,0x03,0xb0,0x07,0xa3,0xa4,0x00,0x00,0x34,0x63,0x00,0x38,0xa0,0xa2,0x00,0x00,
+0x90,0x64,0x00,0x00,0x3c,0x02,0xb0,0x07,0x34,0x42,0x00,0x20,0xa3,0xa4,0x00,0x00,
+0xa0,0xa0,0x00,0x00,0x90,0xa3,0x00,0x00,0xaf,0x82,0xc2,0x5c,0xa3,0xa3,0x00,0x00,
+0xa0,0x40,0x00,0x00,0x90,0x43,0x00,0x00,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x08,
+};
+
+#define DataArrayLengthDTM 2860
+u8 Rtl8192PciEFwDataArrayDTM[DataArrayLengthDTM] = {
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0a,0x0d,0x5b,0x43,
+0x4d,0x50,0x4b,0x5d,0x00,0x00,0x00,0x00,0x80,0x01,0x00,0x0c,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x28,0x28,0x28,
+0x28,0x28,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,
+0x08,0x08,0x08,0x08,0xa0,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,
+0x10,0x10,0x10,0x10,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x10,0x10,
+0x10,0x10,0x10,0x10,0x10,0x41,0x41,0x41,0x41,0x41,0x41,0x01,0x01,0x01,0x01,0x01,
+0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x10,
+0x10,0x10,0x10,0x10,0x10,0x42,0x42,0x42,0x42,0x42,0x42,0x02,0x02,0x02,0x02,0x02,
+0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x10,
+0x10,0x10,0x10,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0xa0,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,
+0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,
+0x10,0x10,0x10,0x10,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
+0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x10,0x01,0x01,0x01,0x01,
+0x01,0x01,0x01,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,
+0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x10,0x02,0x02,0x02,0x02,
+0x02,0x02,0x02,0x02,0x20,0x09,0x0d,0x0a,0x00,0x00,0x00,0x00,0x80,0x01,0x03,0x14,
+0x00,0x00,0x00,0x00,0x43,0x6e,0x73,0x64,0x31,0x00,0x00,0x00,0x68,0x65,0x6c,0x70,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x72,0x34,0x00,0x00,0x77,0x34,0x00,0x00,
+0x64,0x62,0x67,0x00,0x72,0x61,0x63,0x74,0x72,0x6c,0x00,0x00,0x73,0x79,0x73,0x64,
+0x00,0x00,0x00,0x00,0x73,0x79,0x73,0x63,0x74,0x72,0x6c,0x00,0x74,0x78,0x74,0x62,
+0x6c,0x00,0x00,0x00,0x70,0x72,0x61,0x6e,0x67,0x65,0x00,0x00,0x64,0x6d,0x00,0x00,
+0x75,0x6e,0x6b,0x6e,0x6f,0x77,0x00,0x00,0x80,0x01,0x03,0x2c,0x80,0x01,0x03,0x34,
+0x80,0x01,0x03,0x34,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x80,0x00,0x20,0x5c,
+0x80,0x01,0x03,0x38,0x80,0x01,0x03,0x34,0x80,0x01,0x03,0x34,0x00,0x00,0x00,0x01,
+0x00,0x00,0x00,0x00,0x80,0x00,0x21,0xbc,0x80,0x01,0x03,0x3c,0x80,0x01,0x03,0x34,
+0x80,0x01,0x03,0x34,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x80,0x00,0x23,0x38,
+0x80,0x01,0x03,0x40,0x80,0x01,0x03,0x34,0x80,0x01,0x03,0x34,0x00,0x00,0x00,0x01,
+0x00,0x00,0x00,0x00,0x80,0x00,0x25,0x04,0x80,0x01,0x03,0x44,0x80,0x01,0x03,0x34,
+0x80,0x01,0x03,0x34,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x80,0x00,0x25,0xdc,
+0x80,0x01,0x03,0x4c,0x80,0x01,0x03,0x34,0x80,0x01,0x03,0x34,0x00,0x00,0x00,0x01,
+0x00,0x00,0x00,0x00,0x80,0x00,0x25,0xe4,0x80,0x01,0x03,0x54,0x80,0x01,0x03,0x34,
+0x80,0x01,0x03,0x34,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x80,0x00,0x26,0x88,
+0x80,0x01,0x03,0x5c,0x80,0x01,0x03,0x34,0x80,0x01,0x03,0x34,0x00,0x00,0x00,0x01,
+0x00,0x00,0x00,0x00,0x80,0x00,0x26,0x90,0x80,0x01,0x03,0x64,0x80,0x01,0x03,0x34,
+0x80,0x01,0x03,0x34,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x80,0x00,0x28,0x1c,
+0x80,0x01,0x03,0x6c,0x80,0x01,0x03,0x34,0x80,0x01,0x03,0x34,0x00,0x00,0x00,0x01,
+0x00,0x00,0x00,0x00,0x80,0x00,0x28,0x90,0x80,0x01,0x03,0x70,0x80,0x01,0x03,0x34,
+0x80,0x01,0x03,0x34,0x00,0x00,0x00,0x0f,0x00,0x00,0x00,0x01,0x80,0x00,0x29,0x1c,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0a,0x0d,0x52,0x54,0x4c,0x38,0x31,0x39,
+0x58,0x2d,0x25,0x64,0x3e,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x52,0x54,0x4c,0x38,
+0x31,0x39,0x58,0x2d,0x25,0x64,0x3e,0x0a,0x0d,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x2a,0x00,0x00,0x00,0x0a,0x0d,0x45,0x72,0x72,0x20,0x44,0x49,0x52,0x00,0x00,0x00,
+0x0a,0x0d,0x44,0x42,0x47,0x20,0x43,0x4d,0x44,0x73,0x3a,0x00,0x0a,0x0d,0x5b,0x00,
+0x5d,0x2d,0x00,0x00,0x0a,0x0d,0x3c,0x31,0x2e,0x43,0x4d,0x4e,0x3e,0x20,0x3c,0x32,
+0x2e,0x3f,0x3e,0x00,0x0a,0x0d,0x20,0x79,0x65,0x61,0x72,0x2d,0x64,0x61,0x79,0x2d,
+0x68,0x6f,0x75,0x72,0x2d,0x6d,0x69,0x6e,0x2d,0x73,0x65,0x63,0x2d,0x31,0x30,0x6d,
+0x73,0x3d,0x00,0x00,0x25,0x64,0x2d,0x00,0x0a,0x0d,0x09,0x20,0x20,0x20,0x20,0x20,
+0x30,0x30,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x30,0x34,0x20,0x20,0x20,0x20,0x20,
+0x20,0x20,0x30,0x38,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x30,0x43,0x00,0x00,0x00,
+0x0a,0x0d,0x09,0x20,0x20,0x20,0x20,0x20,0x3d,0x3d,0x3d,0x3d,0x3d,0x3d,0x3d,0x3d,
+0x3d,0x3d,0x3d,0x3d,0x3d,0x3d,0x3d,0x3d,0x3d,0x3d,0x3d,0x3d,0x3d,0x3d,0x3d,0x3d,
+0x3d,0x3d,0x3d,0x3d,0x3d,0x3d,0x3d,0x3d,0x3d,0x3d,0x3d,0x00,0x0d,0x0a,0x20,0x30,
+0x78,0x25,0x30,0x38,0x58,0x20,0x20,0x00,0x09,0x00,0x00,0x00,0x25,0x30,0x38,0x58,
+0x20,0x00,0x00,0x00,0x0a,0x0d,0x44,0x62,0x67,0x5f,0x46,0x6c,0x61,0x67,0x25,0x64,
+0x3d,0x30,0x78,0x25,0x30,0x38,0x78,0x00,0x0a,0x0d,0x20,0x76,0x6f,0x71,0x74,0x78,
+0x72,0x65,0x71,0x20,0x3d,0x20,0x25,0x64,0x00,0x00,0x00,0x00,0x0a,0x0d,0x20,0x76,
+0x69,0x71,0x74,0x78,0x72,0x65,0x71,0x20,0x3d,0x20,0x25,0x64,0x00,0x00,0x00,0x00,
+0x0a,0x0d,0x20,0x62,0x65,0x71,0x74,0x78,0x72,0x65,0x71,0x20,0x3d,0x20,0x25,0x64,
+0x00,0x00,0x00,0x00,0x0a,0x0d,0x20,0x62,0x6b,0x71,0x74,0x78,0x72,0x65,0x71,0x20,
+0x3d,0x20,0x25,0x64,0x00,0x00,0x00,0x00,0x0a,0x0d,0x20,0x62,0x63,0x6e,0x71,0x74,
+0x78,0x72,0x65,0x71,0x20,0x3d,0x20,0x25,0x64,0x00,0x00,0x00,0x0a,0x0d,0x20,0x68,
+0x71,0x74,0x78,0x72,0x65,0x71,0x20,0x3d,0x20,0x25,0x64,0x00,0x0a,0x0d,0x20,0x6d,
+0x67,0x71,0x74,0x78,0x72,0x65,0x71,0x20,0x3d,0x20,0x25,0x64,0x00,0x00,0x00,0x00,
+0x0a,0x0d,0x54,0x58,0x4c,0x4c,0x54,0x09,0x09,0x4e,0x45,0x58,0x54,0x20,0x20,0x20,
+0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x4e,0x45,0x58,0x54,0x0a,0x0d,0x00,
+0x0a,0x0d,0x20,0x50,0x61,0x67,0x65,0x25,0x33,0x64,0x09,0x00,0x25,0x34,0x64,0x20,
+0x20,0x20,0x20,0x00,0x25,0x34,0x64,0x20,0x20,0x20,0x20,0x09,0x00,0x00,0x00,0x00,
+0x0a,0x0d,0x54,0x58,0x4f,0x51,0x54,0x09,0x09,0x48,0x65,0x61,0x64,0x20,0x20,0x20,
+0x20,0x54,0x61,0x69,0x6c,0x20,0x20,0x20,0x20,0x48,0x65,0x61,0x64,0x20,0x20,0x20,
+0x20,0x54,0x61,0x69,0x6c,0x0a,0x0d,0x00,0x0a,0x0d,0x55,0x6e,0x6b,0x6e,0x6f,0x77,
+0x20,0x63,0x6f,0x6d,0x6d,0x61,0x6e,0x64,0x00,0x00,0x00,0x00,0x0a,0x0d,0x45,0x72,
+0x72,0x20,0x41,0x72,0x67,0x0a,0x0d,0x55,0x53,0x41,0x47,0x45,0x3a,0x00,0x00,0x00,
+0x10,0x00,0x08,0x00,0x02,0xe9,0x01,0x74,0x02,0xab,0x01,0xc7,0x01,0x55,0x00,0xe4,
+0x00,0xab,0x00,0x72,0x00,0x55,0x00,0x4c,0x00,0x4c,0x00,0x4c,0x00,0x4c,0x00,0x4c,
+0x02,0x76,0x01,0x3b,0x00,0xd2,0x00,0x9e,0x00,0x69,0x00,0x4f,0x00,0x46,0x00,0x3f,
+0x01,0x3b,0x00,0x9e,0x00,0x69,0x00,0x4f,0x00,0x35,0x00,0x27,0x00,0x23,0x00,0x20,
+0x01,0x2f,0x00,0x98,0x00,0x65,0x00,0x4c,0x00,0x33,0x00,0x26,0x00,0x22,0x00,0x1e,
+0x00,0x98,0x00,0x4c,0x00,0x33,0x00,0x26,0x00,0x19,0x00,0x13,0x00,0x11,0x00,0x0f,
+0x02,0x39,0x01,0x1c,0x00,0xbd,0x00,0x8e,0x00,0x5f,0x00,0x47,0x00,0x3f,0x00,0x39,
+0x01,0x1c,0x00,0x8e,0x00,0x5f,0x00,0x47,0x00,0x2f,0x00,0x23,0x00,0x20,0x00,0x1c,
+0x01,0x11,0x00,0x89,0x00,0x5b,0x00,0x44,0x00,0x2e,0x00,0x22,0x00,0x1e,0x00,0x1b,
+0x00,0x89,0x00,0x44,0x00,0x2e,0x00,0x22,0x00,0x17,0x00,0x11,0x00,0x0f,0x00,0x0e,
+0x02,0xab,0x02,0xab,0x02,0x66,0x02,0x66,0x07,0x06,0x06,0x06,0x05,0x06,0x07,0x08,
+0x04,0x06,0x07,0x08,0x09,0x0a,0x0b,0x0b,0x49,0x6e,0x74,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x54,0x4c,0x42,0x4d,0x4f,0x44,0x00,0x00,0x00,0x00,0x54,0x4c,0x42,0x4c,
+0x5f,0x64,0x61,0x74,0x61,0x00,0x54,0x4c,0x42,0x53,0x00,0x00,0x00,0x00,0x00,0x00,
+0x41,0x64,0x45,0x4c,0x5f,0x64,0x61,0x74,0x61,0x00,0x41,0x64,0x45,0x53,0x00,0x00,
+0x00,0x00,0x00,0x00,0x45,0x78,0x63,0x43,0x6f,0x64,0x65,0x36,0x00,0x00,0x45,0x78,
+0x63,0x43,0x6f,0x64,0x65,0x37,0x00,0x00,0x53,0x79,0x73,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x42,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x52,0x49,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x43,0x70,0x55,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x4f,0x76,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x80,0x01,0x11,0x43,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x00,0x10,
+0x00,0x00,0x00,0x30,0x00,0x00,0x00,0x60,0x00,0x00,0x00,0x30,0x00,0x00,0x00,0x50,
+0x00,0x00,0x00,0x60,0x00,0x00,0x00,0x90,0x00,0x00,0x00,0xc0,0x00,0x00,0x01,0x20,
+0x00,0x00,0x01,0x80,0x00,0x00,0x01,0xb0,0x00,0x00,0x00,0x60,0x00,0x00,0x00,0xd0,
+0x00,0x00,0x01,0x30,0x00,0x00,0x01,0xa0,0x00,0x00,0x02,0x70,0x00,0x00,0x03,0x40,
+0x00,0x00,0x03,0xa0,0x00,0x00,0x04,0x10,0x00,0x00,0x00,0xd0,0x00,0x00,0x01,0xa0,
+0x00,0x00,0x02,0x70,0x00,0x00,0x03,0x40,0x00,0x00,0x04,0xe0,0x00,0x00,0x06,0x80,
+0x00,0x00,0x07,0x50,0x00,0x00,0x07,0xf8,0x01,0x01,0x01,0x01,0x01,0x01,0x02,0x02,
+0x02,0x02,0x02,0x02,0x01,0x01,0x02,0x02,0x04,0x05,0x06,0x06,0x02,0x02,0x04,0x06,
+0x07,0x09,0x0a,0x0c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x3c,0x4e,0x55,0x4c,0x4c,0x3e,0x00,0x00,0x30,0x31,0x32,0x33,
+0x34,0x35,0x36,0x37,0x38,0x39,0x61,0x62,0x63,0x64,0x65,0x66,0x67,0x68,0x69,0x6a,
+0x6b,0x6c,0x6d,0x6e,0x6f,0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77,0x78,0x79,0x7a,
+0x00,0x00,0x00,0x00,0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37,0x38,0x39,0x41,0x42,
+0x43,0x44,0x45,0x46,0x47,0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f,0x50,0x51,0x52,
+0x53,0x54,0x55,0x56,0x57,0x58,0x59,0x5a,0x00,0x00,0x00,0x00,0x5b,0x52,0x58,0x5d,
+0x20,0x70,0x6b,0x74,0x5f,0x6c,0x65,0x6e,0x3d,0x25,0x64,0x20,0x6f,0x66,0x66,0x73,
+0x65,0x74,0x3d,0x25,0x64,0x20,0x73,0x74,0x61,0x72,0x74,0x5f,0x61,0x64,0x64,0x72,
+0x3d,0x25,0x30,0x38,0x78,0x0a,0x0d,0x00,0x80,0x00,0x6a,0x64,0x80,0x00,0x6a,0x88,
+0x80,0x00,0x6a,0xa4,0x80,0x00,0x6b,0x90,0x80,0x00,0x6c,0x48,0x80,0x00,0x6c,0x98,
+0x80,0x00,0x6d,0x04,0x80,0x00,0x6e,0x08,0x80,0x00,0x6e,0x3c,0x80,0x00,0x6e,0x50,
+0x80,0x00,0x6e,0x64,0x80,0x00,0x6f,0x3c,0x80,0x00,0x6f,0x78,0x80,0x00,0x70,0x28,
+0x80,0x00,0x70,0x50,0x80,0x00,0x6a,0x20,0x80,0x00,0x70,0x64,0x80,0x00,0x76,0x5c,
+0x80,0x00,0x76,0xd4,0x80,0x00,0x76,0xe0,0x80,0x00,0x76,0xec,0x80,0x00,0x76,0x74,
+0x80,0x00,0x76,0x74,0x80,0x00,0x76,0x74,0x80,0x00,0x76,0x74,0x80,0x00,0x76,0x74,
+0x80,0x00,0x76,0x74,0x80,0x00,0x76,0x74,0x80,0x00,0x76,0x74,0x80,0x00,0x76,0x74,
+0x80,0x00,0x76,0x74,0x80,0x00,0x76,0x74,0x80,0x00,0x76,0x74,0x80,0x00,0x76,0xf8,
+0x80,0x00,0x77,0x04,0x80,0x00,0x77,0x10,0x80,0x00,0xa7,0x80,0x80,0x00,0xa7,0x98,
+0x80,0x00,0xa7,0x98,0x80,0x00,0xa7,0x88,0x80,0x00,0xa7,0x98,0x80,0x00,0xa7,0x98,
+0x80,0x00,0xa7,0x98,0x80,0x00,0xa7,0x98,0x80,0x00,0xa7,0x98,0x80,0x00,0xa7,0x98,
+0x80,0x00,0xa7,0x98,0x80,0x00,0xa7,0x90,0x80,0x00,0xa7,0x98,0x80,0x00,0xa7,0x78,
+0x80,0x00,0xa7,0x98,0x80,0x00,0xa7,0x98,0x80,0x00,0xab,0xc0,0x80,0x00,0xa8,0xb0,
+0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,
+0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,
+0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,
+0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,
+0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,
+0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,
+0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,
+0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,
+0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,
+0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,
+0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,
+0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,
+0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xa8,0xbc,0x80,0x00,0xaa,0xc8,
+0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,
+0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,
+0x80,0x00,0xaa,0xc8,0x80,0x00,0xa8,0x44,0x80,0x00,0xa9,0x90,0x80,0x00,0xaa,0xc8,
+0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xa9,0x90,
+0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,
+0x80,0x00,0xa9,0x98,0x80,0x00,0xa9,0xb8,0x80,0x00,0xa9,0xc0,0x80,0x00,0xaa,0xc8,
+0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0x18,0x80,0x00,0xaa,0xc8,0x80,0x00,0xa8,0xc4,
+0x80,0x00,0xaa,0xc8,0x80,0x00,0xaa,0xc8,0x80,0x00,0xa8,0xc0,};
+
+#define PHY_REGArrayLengthDTM 1
+u32 Rtl8192PciEPHY_REGArrayDTM[PHY_REGArrayLengthDTM] = {
+0x0, };
+
+#define PHY_REG_1T2RArrayLengthDTM 296
+u32 Rtl8192PciEPHY_REG_1T2RArrayDTM[PHY_REG_1T2RArrayLengthDTM] = {
+0x800,0x00000000,
+0x804,0x00000001,
+0x808,0x0000fc00,
+0x80c,0x0000001c,
+0x810,0x801010aa,
+0x814,0x008514d0,
+0x818,0x00000040,
+0x81c,0x00000000,
+0x820,0x00000004,
+0x824,0x00690000,
+0x828,0x00000004,
+0x82c,0x00e90000,
+0x830,0x00000004,
+0x834,0x00690000,
+0x838,0x00000004,
+0x83c,0x00e90000,
+0x840,0x00000000,
+0x844,0x00000000,
+0x848,0x00000000,
+0x84c,0x00000000,
+0x850,0x00000000,
+0x854,0x00000000,
+0x858,0x65a965a9,
+0x85c,0x65a965a9,
+0x860,0x001f0010,
+0x864,0x007f0010,
+0x868,0x001f0010,
+0x86c,0x007f0010,
+0x870,0x0f100f70,
+0x874,0x0f100f70,
+0x878,0x00000000,
+0x87c,0x00000000,
+0x880,0x6870e36c,
+0x884,0xe3573600,
+0x888,0x4260c340,
+0x88c,0x0000ff00,
+0x890,0x00000000,
+0x894,0xfffffffe,
+0x898,0x40302010,
+0x89c,0x00706050,
+0x8b0,0x00000000,
+0x8e0,0x00000000,
+0x8e4,0x00000000,
+0x900,0x00000000,
+0x904,0x00000023,
+0x908,0x00000000,
+0x90c,0x31121311,
+0xa00,0x00d0c7d8,
+0xa04,0x811f0008,
+0xa08,0x80cd8300,
+0xa0c,0x2e62740f,
+0xa10,0x95009b78,
+0xa14,0x11145008,
+0xa18,0x00881117,
+0xa1c,0x89140fa0,
+0xa20,0x1a1b0000,
+0xa24,0x090e1317,
+0xa28,0x00000204,
+0xa2c,0x00000000,
+0xc00,0x00000040,
+0xc04,0x00005411,
+0xc08,0x000000e4,
+0xc0c,0x6c6c6c6c,
+0xc10,0x08800000,
+0xc14,0x40000100,
+0xc18,0x08000000,
+0xc1c,0x40000100,
+0xc20,0x08000000,
+0xc24,0x40000100,
+0xc28,0x08000000,
+0xc2c,0x40000100,
+0xc30,0x6de98a44,
+0xc34,0x469652cd,
+0xc38,0x49475996,
+0xc3c,0x0a9a9764,
+0xc40,0x1f7c423f,
+0xc44,0x000100b7,
+0xc48,0xec020000,
+0xc4c,0x00000300,
+0xc50,0x69543430,
+0xc54,0x433c0094,
+0xc58,0x69543430,
+0xc5c,0x433c0094,
+0xc60,0x69543430,
+0xc64,0x433c0094,
+0xc68,0x69543430,
+0xc6c,0x433c0094,
+0xc70,0x2c7f000d,
+0xc74,0x0186175b,
+0xc78,0x0000001f,
+0xc7c,0x00b91612,
+0xc80,0x40000100,
+0xc84,0x20000000,
+0xc88,0x40000100,
+0xc8c,0x08000000,
+0xc90,0x40000100,
+0xc94,0x00000000,
+0xc98,0x40000100,
+0xc9c,0x00000000,
+0xca0,0x00492492,
+0xca4,0x00000000,
+0xca8,0x00000000,
+0xcac,0x00000000,
+0xcb0,0x00000000,
+0xcb4,0x00000000,
+0xcb8,0x00000000,
+0xcbc,0x00492492,
+0xcc0,0x00000000,
+0xcc4,0x00000000,
+0xcc8,0x00000000,
+0xccc,0x00000000,
+0xcd0,0x00000000,
+0xcd4,0x00000000,
+0xcd8,0x64b22427,
+0xcdc,0x00766932,
+0xce0,0x00222222,
+0xd00,0x00000740,
+0xd04,0x00000401,
+0xd08,0x0000907f,
+0xd0c,0x00000001,
+0xd10,0xa0633333,
+0xd14,0x33333c63,
+0xd18,0x6a8f5b6b,
+0xd1c,0x00000000,
+0xd20,0x00000000,
+0xd24,0x00000000,
+0xd28,0x00000000,
+0xd2c,0xcc979975,
+0xd30,0x00000000,
+0xd34,0x00000000,
+0xd38,0x00000000,
+0xd3c,0x00027293,
+0xd40,0x00000000,
+0xd44,0x00000000,
+0xd48,0x00000000,
+0xd4c,0x00000000,
+0xd50,0x6437140a,
+0xd54,0x024dbd02,
+0xd58,0x00000000,
+0xd5c,0x2d432064,
+0xe00,0x161a1a1a,
+0xe04,0x12121416,
+0xe08,0x00001800,
+0xe0c,0x00000000,
+0xe10,0x161a1a1a,
+0xe14,0x12121416,
+0xe18,0x161a1a1a,
+0xe1c,0x12121416,
+};
+
+#define RadioA_ArrayLengthDTM 246
+u32 Rtl8192PciERadioA_ArrayDTM[RadioA_ArrayLengthDTM] = {
+0x019,0x00000003,
+0x000,0x000000bf,
+0x001,0x00000ee0,
+0x002,0x0000004c,
+0x003,0x000007f1,
+0x004,0x00000975,
+0x005,0x00000c58,
+0x006,0x00000ae6,
+0x007,0x000000ca,
+0x008,0x00000e1c,
+0x009,0x000007f0,
+0x00a,0x000009d0,
+0x00b,0x000001ba,
+0x00c,0x00000240,
+0x00e,0x00000020,
+0x00f,0x00000ff0,
+0x012,0x00000806,
+0x014,0x000005ab,
+0x015,0x00000f80,
+0x016,0x00000020,
+0x017,0x00000597,
+0x018,0x0000050a,
+0x01a,0x00000e00,
+0x01b,0x00000f5e,
+0x01c,0x00000008,
+0x01d,0x00000607,
+0x01e,0x000006cc,
+0x01f,0x00000000,
+0x020,0x00000096,
+0x01f,0x00000001,
+0x020,0x00000076,
+0x01f,0x00000002,
+0x020,0x00000056,
+0x01f,0x00000003,
+0x020,0x00000036,
+0x01f,0x00000004,
+0x020,0x00000016,
+0x01f,0x00000005,
+0x020,0x000001f6,
+0x01f,0x00000006,
+0x020,0x000001d6,
+0x01f,0x00000007,
+0x020,0x000001b6,
+0x01f,0x00000008,
+0x020,0x00000196,
+0x01f,0x00000009,
+0x020,0x00000176,
+0x01f,0x0000000a,
+0x020,0x000000f7,
+0x01f,0x0000000b,
+0x020,0x000000d7,
+0x01f,0x0000000c,
+0x020,0x000000b7,
+0x01f,0x0000000d,
+0x020,0x00000097,
+0x01f,0x0000000e,
+0x020,0x00000077,
+0x01f,0x0000000f,
+0x020,0x00000057,
+0x01f,0x00000010,
+0x020,0x00000037,
+0x01f,0x00000011,
+0x020,0x000000fb,
+0x01f,0x00000012,
+0x020,0x000000db,
+0x01f,0x00000013,
+0x020,0x000000bb,
+0x01f,0x00000014,
+0x020,0x000000ff,
+0x01f,0x00000015,
+0x020,0x000000e3,
+0x01f,0x00000016,
+0x020,0x000000c3,
+0x01f,0x00000017,
+0x020,0x000000a3,
+0x01f,0x00000018,
+0x020,0x00000083,
+0x01f,0x00000019,
+0x020,0x00000063,
+0x01f,0x0000001a,
+0x020,0x00000043,
+0x01f,0x0000001b,
+0x020,0x00000023,
+0x01f,0x0000001c,
+0x020,0x00000003,
+0x01f,0x0000001d,
+0x020,0x000001e3,
+0x01f,0x0000001e,
+0x020,0x000001c3,
+0x01f,0x0000001f,
+0x020,0x000001a3,
+0x01f,0x00000020,
+0x020,0x00000183,
+0x01f,0x00000021,
+0x020,0x00000163,
+0x01f,0x00000022,
+0x020,0x00000143,
+0x01f,0x00000023,
+0x020,0x00000123,
+0x01f,0x00000024,
+0x020,0x00000103,
+0x023,0x00000203,
+0x024,0x00000200,
+0x00b,0x000001ba,
+0x02c,0x000003d7,
+0x02d,0x00000ff0,
+0x000,0x00000037,
+0x004,0x00000160,
+0x007,0x00000080,
+0x002,0x0000088d,
+0x0fe,0x00000000,
+0x0fe,0x00000000,
+0x016,0x00000200,
+0x016,0x00000380,
+0x016,0x00000020,
+0x016,0x000001a0,
+0x000,0x000000bf,
+0x00d,0x0000001f,
+0x00d,0x00000c9f,
+0x002,0x0000004d,
+0x000,0x00000cbf,
+0x004,0x00000975,
+0x007,0x00000700,
+};
+
+#define RadioB_ArrayLengthDTM 78
+u32 Rtl8192PciERadioB_ArrayDTM[RadioB_ArrayLengthDTM] = {
+0x019,0x00000003,
+0x000,0x000000bf,
+0x001,0x000006e0,
+0x002,0x0000004c,
+0x003,0x000007f1,
+0x004,0x00000975,
+0x005,0x00000c58,
+0x006,0x00000ae6,
+0x007,0x000000ca,
+0x008,0x00000e1c,
+0x000,0x000000b7,
+0x00a,0x00000850,
+0x000,0x000000bf,
+0x00b,0x000001ba,
+0x00c,0x00000240,
+0x00e,0x00000020,
+0x015,0x00000f80,
+0x016,0x00000020,
+0x017,0x00000597,
+0x018,0x0000050a,
+0x01a,0x00000e00,
+0x01b,0x00000f5e,
+0x01d,0x00000607,
+0x01e,0x000006cc,
+0x00b,0x000001ba,
+0x023,0x00000203,
+0x024,0x00000200,
+0x000,0x00000037,
+0x004,0x00000160,
+0x016,0x00000200,
+0x016,0x00000380,
+0x016,0x00000020,
+0x016,0x000001a0,
+0x00d,0x00000ccc,
+0x000,0x000000bf,
+0x002,0x0000004d,
+0x000,0x00000cbf,
+0x004,0x00000975,
+0x007,0x00000700,
+};
+
+#define RadioC_ArrayLengthDTM 1
+u32 Rtl8192PciERadioC_ArrayDTM[RadioC_ArrayLengthDTM] = {
+0x0, };
+
+#define RadioD_ArrayLengthDTM 1
+u32 Rtl8192PciERadioD_ArrayDTM[RadioD_ArrayLengthDTM] = {
+0x0, };
+
+u32 Rtl8192PciEMACPHY_ArrayDTM[] = {
+0x03c,0xffff0000,0x00000f0f,
+0x340,0xffffffff,0x161a1a1a,
+0x344,0xffffffff,0x12121416,
+0x348,0x0000ffff,0x00001818,
+0x12c,0xffffffff,0x04000802,
+0x318,0x00000fff,0x00000100,
+};
+
+u32 Rtl8192PciEMACPHY_Array_PGDTM[] = {
+0x03c,0xffff0000,0x00000f0f,
+0xe00,0xffffffff,0x06090909,
+0xe04,0xffffffff,0x00030306,
+0xe08,0x0000ff00,0x00000000,
+0xe10,0xffffffff,0x050b0b0e,
+0xe14,0xffffffff,0x00030305,
+0xe18,0xffffffff,0x050b0b0e,
+0xe1c,0xffffffff,0x00030305,
+0x12c,0xffffffff,0x04000802,
+0x318,0x00000fff,0x00000800,
+};
+
+u32 Rtl8192PciEAGCTAB_ArrayDTM[AGCTAB_ArrayLength] = {
+0xc78,0x7d000001,
+0xc78,0x7d010001,
+0xc78,0x7d020001,
+0xc78,0x7d030001,
+0xc78,0x7d040001,
+0xc78,0x7d050001,
+0xc78,0x7c060001,
+0xc78,0x7b070001,
+0xc78,0x7a080001,
+0xc78,0x79090001,
+0xc78,0x780a0001,
+0xc78,0x770b0001,
+0xc78,0x760c0001,
+0xc78,0x750d0001,
+0xc78,0x740e0001,
+0xc78,0x730f0001,
+0xc78,0x72100001,
+0xc78,0x71110001,
+0xc78,0x70120001,
+0xc78,0x6f130001,
+0xc78,0x6e140001,
+0xc78,0x6d150001,
+0xc78,0x6c160001,
+0xc78,0x6b170001,
+0xc78,0x6a180001,
+0xc78,0x69190001,
+0xc78,0x681a0001,
+0xc78,0x671b0001,
+0xc78,0x661c0001,
+0xc78,0x651d0001,
+0xc78,0x641e0001,
+0xc78,0x491f0001,
+0xc78,0x48200001,
+0xc78,0x47210001,
+0xc78,0x46220001,
+0xc78,0x45230001,
+0xc78,0x44240001,
+0xc78,0x43250001,
+0xc78,0x28260001,
+0xc78,0x27270001,
+0xc78,0x26280001,
+0xc78,0x25290001,
+0xc78,0x242a0001,
+0xc78,0x232b0001,
+0xc78,0x222c0001,
+0xc78,0x212d0001,
+0xc78,0x202e0001,
+0xc78,0x0a2f0001,
+0xc78,0x08300001,
+0xc78,0x06310001,
+0xc78,0x05320001,
+0xc78,0x04330001,
+0xc78,0x03340001,
+0xc78,0x02350001,
+0xc78,0x01360001,
+0xc78,0x00370001,
+0xc78,0x00380001,
+0xc78,0x00390001,
+0xc78,0x003a0001,
+0xc78,0x003b0001,
+0xc78,0x003c0001,
+0xc78,0x003d0001,
+0xc78,0x003e0001,
+0xc78,0x003f0001,
+0xc78,0x7d400001,
+0xc78,0x7d410001,
+0xc78,0x7d420001,
+0xc78,0x7d430001,
+0xc78,0x7d440001,
+0xc78,0x7d450001,
+0xc78,0x7c460001,
+0xc78,0x7b470001,
+0xc78,0x7a480001,
+0xc78,0x79490001,
+0xc78,0x784a0001,
+0xc78,0x774b0001,
+0xc78,0x764c0001,
+0xc78,0x754d0001,
+0xc78,0x744e0001,
+0xc78,0x734f0001,
+0xc78,0x72500001,
+0xc78,0x71510001,
+0xc78,0x70520001,
+0xc78,0x6f530001,
+0xc78,0x6e540001,
+0xc78,0x6d550001,
+0xc78,0x6c560001,
+0xc78,0x6b570001,
+0xc78,0x6a580001,
+0xc78,0x69590001,
+0xc78,0x685a0001,
+0xc78,0x675b0001,
+0xc78,0x665c0001,
+0xc78,0x655d0001,
+0xc78,0x645e0001,
+0xc78,0x495f0001,
+0xc78,0x48600001,
+0xc78,0x47610001,
+0xc78,0x46620001,
+0xc78,0x45630001,
+0xc78,0x44640001,
+0xc78,0x43650001,
+0xc78,0x28660001,
+0xc78,0x27670001,
+0xc78,0x26680001,
+0xc78,0x25690001,
+0xc78,0x246a0001,
+0xc78,0x236b0001,
+0xc78,0x226c0001,
+0xc78,0x216d0001,
+0xc78,0x206e0001,
+0xc78,0x0a6f0001,
+0xc78,0x08700001,
+0xc78,0x06710001,
+0xc78,0x05720001,
+0xc78,0x04730001,
+0xc78,0x03740001,
+0xc78,0x02750001,
+0xc78,0x01760001,
+0xc78,0x00770001,
+0xc78,0x00780001,
+0xc78,0x00790001,
+0xc78,0x007a0001,
+0xc78,0x007b0001,
+0xc78,0x007c0001,
+0xc78,0x007d0001,
+0xc78,0x007e0001,
+0xc78,0x007f0001,
+0xc78,0x2e00001e,
+0xc78,0x2e01001e,
+0xc78,0x2e02001e,
+0xc78,0x2e03001e,
+0xc78,0x2e04001e,
+0xc78,0x2e05001e,
+0xc78,0x3006001e,
+0xc78,0x3407001e,
+0xc78,0x3908001e,
+0xc78,0x3c09001e,
+0xc78,0x3f0a001e,
+0xc78,0x420b001e,
+0xc78,0x440c001e,
+0xc78,0x450d001e,
+0xc78,0x460e001e,
+0xc78,0x460f001e,
+0xc78,0x4710001e,
+0xc78,0x4811001e,
+0xc78,0x4912001e,
+0xc78,0x4a13001e,
+0xc78,0x4b14001e,
+0xc78,0x4b15001e,
+0xc78,0x4c16001e,
+0xc78,0x4d17001e,
+0xc78,0x4e18001e,
+0xc78,0x4f19001e,
+0xc78,0x4f1a001e,
+0xc78,0x501b001e,
+0xc78,0x511c001e,
+0xc78,0x521d001e,
+0xc78,0x521e001e,
+0xc78,0x531f001e,
+0xc78,0x5320001e,
+0xc78,0x5421001e,
+0xc78,0x5522001e,
+0xc78,0x5523001e,
+0xc78,0x5624001e,
+0xc78,0x5725001e,
+0xc78,0x5726001e,
+0xc78,0x5827001e,
+0xc78,0x5828001e,
+0xc78,0x5929001e,
+0xc78,0x592a001e,
+0xc78,0x5a2b001e,
+0xc78,0x5b2c001e,
+0xc78,0x5c2d001e,
+0xc78,0x5c2e001e,
+0xc78,0x5d2f001e,
+0xc78,0x5e30001e,
+0xc78,0x5f31001e,
+0xc78,0x6032001e,
+0xc78,0x6033001e,
+0xc78,0x6134001e,
+0xc78,0x6235001e,
+0xc78,0x6336001e,
+0xc78,0x6437001e,
+0xc78,0x6438001e,
+0xc78,0x6539001e,
+0xc78,0x663a001e,
+0xc78,0x673b001e,
+0xc78,0x673c001e,
+0xc78,0x683d001e,
+0xc78,0x693e001e,
+0xc78,0x6a3f001e,
+};
+
+#endif //__INC_HAL8192PciE_FW_IMG_DTM_H
diff --git a/drivers/staging/rtl8192su/r8192S_firmware.c b/drivers/staging/rtl8192su/r8192S_firmware.c
new file mode 100644
index 00000000000..b3d69b33acb
--- /dev/null
+++ b/drivers/staging/rtl8192su/r8192S_firmware.c
@@ -0,0 +1,1023 @@
+/**************************************************************************************************
+ * Procedure:    Init boot code/firmware code/data session
+ *
+ * Description: This routine will intialize firmware. If any error occurs during the initialization
+ * 		process, the routine shall terminate immediately and return fail.
+ *		NIC driver should call NdisOpenFile only from MiniportInitialize.
+ *
+ * Arguments:   The pointer of the adapter
+
+ * Returns:
+ *        NDIS_STATUS_FAILURE - the following initialization process should be terminated
+ *        NDIS_STATUS_SUCCESS - if firmware initialization process success
+**************************************************************************************************/
+//#include "ieee80211.h"
+#if defined(RTL8192SE)||defined(RTL8192SU)
+#include "r8192U.h"
+#include "r8192S_firmware.h"
+#include <linux/unistd.h>
+
+#ifdef RTL8192SU
+#include "r8192S_hw.h"
+#include "r8192SU_HWImg.h"
+//#include "r8192S_FwImgDTM.h"
+#else
+//#include "r8192U_hw.h"
+#include "r8192xU_firmware_img.h"
+#endif
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+#include <linux/firmware.h>
+#endif
+
+#define   byte(x,n)  ( (x >> (8 * n)) & 0xff  )
+
+//
+// Description:   This routine will intialize firmware. If any error occurs during the initialization
+//				process, the routine shall terminate immediately and return fail.
+//
+// Arguments:   The pointer of the adapter
+//			   Code address (Virtual address, should fill descriptor with physical address)
+//			   Code size
+// Created by Roger, 2008.04.10.
+//
+bool FirmwareDownloadCode(struct net_device *dev, u8 *	code_virtual_address,u32 buffer_len)
+{
+	struct r8192_priv   *priv = ieee80211_priv(dev);
+	bool 		    rt_status = true;
+	u16		    frag_threshold = MAX_FIRMWARE_CODE_SIZE; //Fragmentation might be required in 90/92 but not in 92S
+	u16		    frag_length, frag_offset = 0;
+	struct sk_buff	    *skb;
+	unsigned char	    *seg_ptr;
+	cb_desc		    *tcb_desc;
+	u8                  	    bLastIniPkt = 0;
+	u16 			    ExtraDescOffset = 0;
+
+#ifdef RTL8192SE
+	fw_SetRQPN(dev);	// For 92SE only
+#endif
+
+	RT_TRACE(COMP_FIRMWARE, "--->FirmwareDownloadCode()\n" );
+
+	//MAX_TRANSMIT_BUFFER_SIZE
+	if(buffer_len >= MAX_FIRMWARE_CODE_SIZE-USB_HWDESC_HEADER_LEN)
+	{
+		RT_TRACE(COMP_ERR, "Size over MAX_FIRMWARE_CODE_SIZE! \n");
+		goto cmdsend_downloadcode_fail;
+	}
+
+	ExtraDescOffset = USB_HWDESC_HEADER_LEN;
+
+	do {
+		if((buffer_len-frag_offset) > frag_threshold)
+		{
+			frag_length = frag_threshold + ExtraDescOffset;
+		}
+		else
+		{
+			frag_length = (u16)(buffer_len - frag_offset + ExtraDescOffset);
+		bLastIniPkt = 1;
+		}
+
+		/* Allocate skb buffer to contain firmware info and tx descriptor info. */
+		skb  = dev_alloc_skb(frag_length);
+		memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev));
+
+		tcb_desc = (cb_desc*)(skb->cb + MAX_DEV_ADDR_SIZE);
+		tcb_desc->queue_index = TXCMD_QUEUE;
+		tcb_desc->bCmdOrInit = DESC_PACKET_TYPE_INIT;
+		tcb_desc->bLastIniPkt = bLastIniPkt;
+
+		skb_reserve(skb, ExtraDescOffset);
+		seg_ptr = (u8 *)skb_put(skb, (u32)(frag_length-ExtraDescOffset));
+		memcpy(seg_ptr, code_virtual_address+frag_offset, (u32)(frag_length-ExtraDescOffset));
+
+		tcb_desc->txbuf_size= frag_length;
+
+		if(!priv->ieee80211->check_nic_enough_desc(dev,tcb_desc->queue_index)||
+			(!skb_queue_empty(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index]))||\
+			(priv->ieee80211->queue_stop) )
+		{
+			RT_TRACE(COMP_FIRMWARE,"=====================================================> tx full!\n");
+			skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb);
+		}
+		else
+		{
+			priv->ieee80211->softmac_hard_start_xmit(skb,dev);
+		}
+
+		frag_offset += (frag_length - ExtraDescOffset);
+
+	}while(frag_offset < buffer_len);
+
+	return rt_status ;
+
+
+cmdsend_downloadcode_fail:
+	rt_status = false;
+	RT_TRACE(COMP_ERR, "CmdSendDownloadCode fail !!\n");
+	return rt_status;
+
+}
+
+#ifdef RTL8192SE
+static void fw_SetRQPN(struct net_device *dev)
+{
+	// Only for 92SE HW bug, we have to set RAPN before every FW download
+	// We can remove the code later.
+	write_nic_dword(dev,  RQPN, 0xffffffff);
+	write_nic_dword(dev,  RQPN+4, 0xffffffff);
+	write_nic_byte(dev,  RQPN+8, 0xff);
+	write_nic_byte(dev,  RQPN+0xB, 0x80);
+	//#if ((HAL_CODE_BASE ==  RTL8192_S) && (PLATFORM != PLATFORM_WINDOWS_USB))
+
+}	/* fw_SetRQPN */
+#endif
+
+RT_STATUS
+FirmwareEnableCPU(struct net_device *dev)
+{
+
+	RT_STATUS	rtStatus = RT_STATUS_SUCCESS;
+	u8		tmpU1b, CPUStatus = 0;
+	u16		tmpU2b;
+	u32		iCheckTime = 200;
+
+	RT_TRACE(COMP_FIRMWARE, "-->FirmwareEnableCPU()\n" );
+#ifdef RTL8192SE
+	fw_SetRQPN(dev);	// For 92SE only
+#endif
+	// Enable CPU.
+	tmpU1b = read_nic_byte(dev, SYS_CLKR);
+	write_nic_byte(dev,  SYS_CLKR, (tmpU1b|SYS_CPU_CLKSEL)); //AFE source
+
+	tmpU2b = read_nic_word(dev, SYS_FUNC_EN);
+	write_nic_word(dev, SYS_FUNC_EN, (tmpU2b|FEN_CPUEN));
+
+	//Polling IMEM Ready after CPU has refilled.
+	do
+	{
+		CPUStatus = read_nic_byte(dev, TCR);
+		if(CPUStatus& IMEM_RDY)
+		{
+			RT_TRACE(COMP_FIRMWARE, "IMEM Ready after CPU has refilled.\n");
+			break;
+		}
+
+		//usleep(100);
+		udelay(100);
+	}while(iCheckTime--);
+
+	if(!(CPUStatus & IMEM_RDY))
+		return RT_STATUS_FAILURE;
+
+	RT_TRACE(COMP_FIRMWARE, "<--FirmwareEnableCPU(): rtStatus(%#x)\n", rtStatus);
+	return rtStatus;
+}
+
+FIRMWARE_8192S_STATUS
+FirmwareGetNextStatus(FIRMWARE_8192S_STATUS FWCurrentStatus)
+{
+	FIRMWARE_8192S_STATUS	NextFWStatus = 0;
+
+	switch(FWCurrentStatus)
+	{
+		case FW_STATUS_INIT:
+			NextFWStatus = FW_STATUS_LOAD_IMEM;
+			break;
+
+		case FW_STATUS_LOAD_IMEM:
+			NextFWStatus = FW_STATUS_LOAD_EMEM;
+			break;
+
+		case FW_STATUS_LOAD_EMEM:
+			NextFWStatus = FW_STATUS_LOAD_DMEM;
+			break;
+
+		case FW_STATUS_LOAD_DMEM:
+			NextFWStatus = FW_STATUS_READY;
+			break;
+
+		default:
+			RT_TRACE(COMP_ERR,"Invalid FW Status(%#x)!!\n", FWCurrentStatus);
+			break;
+	}
+	return	NextFWStatus;
+}
+
+bool
+FirmwareCheckReady(struct net_device *dev,	u8 LoadFWStatus)
+{
+	struct r8192_priv 	*priv = ieee80211_priv(dev);
+	RT_STATUS	rtStatus = RT_STATUS_SUCCESS;
+	rt_firmware	*pFirmware = priv->pFirmware;
+	int			PollingCnt = 1000;
+	//u8	 	tmpU1b, CPUStatus = 0;
+	u8	 	CPUStatus = 0;
+	u32		tmpU4b;
+	//bool		bOrgIMREnable;
+
+	RT_TRACE(COMP_FIRMWARE, "--->FirmwareCheckReady(): LoadStaus(%d),", LoadFWStatus);
+
+	pFirmware->FWStatus = (FIRMWARE_8192S_STATUS)LoadFWStatus;
+	if( LoadFWStatus == FW_STATUS_LOAD_IMEM)
+	{
+		do
+		{//Polling IMEM code done.
+			CPUStatus = read_nic_byte(dev, TCR);
+			if(CPUStatus& IMEM_CODE_DONE)
+				break;
+
+			udelay(5);
+		}while(PollingCnt--);
+		if(!(CPUStatus & IMEM_CHK_RPT) || PollingCnt <= 0)
+		{
+			RT_TRACE(COMP_ERR, "FW_STATUS_LOAD_IMEM FAIL CPU, Status=%x\r\n", CPUStatus);
+			return false;
+		}
+	}
+	else if( LoadFWStatus == FW_STATUS_LOAD_EMEM)
+	{//Check Put Code OK and Turn On CPU
+		do
+		{//Polling EMEM code done.
+			CPUStatus = read_nic_byte(dev, TCR);
+			if(CPUStatus& EMEM_CODE_DONE)
+				break;
+
+			udelay(5);
+		}while(PollingCnt--);
+		if(!(CPUStatus & EMEM_CHK_RPT))
+		{
+			RT_TRACE(COMP_ERR, "FW_STATUS_LOAD_EMEM FAIL CPU, Status=%x\r\n", CPUStatus);
+			return false;
+		}
+
+		// Turn On CPU
+		rtStatus = FirmwareEnableCPU(dev);
+		if(rtStatus != RT_STATUS_SUCCESS)
+		{
+			RT_TRACE(COMP_ERR, "Enable CPU fail ! \n" );
+			return false;
+		}
+	}
+	else if( LoadFWStatus == FW_STATUS_LOAD_DMEM)
+	{
+		do
+		{//Polling DMEM code done
+			CPUStatus = read_nic_byte(dev, TCR);
+			if(CPUStatus& DMEM_CODE_DONE)
+				break;
+
+			udelay(5);
+		}while(PollingCnt--);
+
+		if(!(CPUStatus & DMEM_CODE_DONE))
+		{
+			RT_TRACE(COMP_ERR, "Polling  DMEM code done fail ! CPUStatus(%#x)\n", CPUStatus);
+			return false;
+		}
+
+		RT_TRACE(COMP_FIRMWARE, "DMEM code download success, CPUStatus(%#x)\n", CPUStatus);
+
+//              PollingCnt = 100; // Set polling cycle to 10ms.
+              PollingCnt = 10000; // Set polling cycle to 10ms.
+
+		do
+		{//Polling Load Firmware ready
+			CPUStatus = read_nic_byte(dev, TCR);
+			if(CPUStatus & FWRDY)
+				break;
+
+			udelay(100);
+		}while(PollingCnt--);
+
+		RT_TRACE(COMP_FIRMWARE, "Polling Load Firmware ready, CPUStatus(%x)\n", CPUStatus);
+
+		//if(!(CPUStatus & LOAD_FW_READY))
+		//if((CPUStatus & LOAD_FW_READY) != 0xff)
+		if((CPUStatus & LOAD_FW_READY) != LOAD_FW_READY)
+		{
+			RT_TRACE(COMP_ERR, "Polling Load Firmware ready fail ! CPUStatus(%x)\n", CPUStatus);
+			return false;
+		}
+
+	       //
+              // <Roger_Notes> USB interface will update reserved followings parameters later!!
+              // 2008.08.28.
+              //
+#ifdef RTL8192SE
+		//write_nic_dword(dev, RQPN, 0x10101010);
+		//write_nic_byte(dev,  0xAB, 0x80);
+#endif
+
+	       //
+              // <Roger_Notes> If right here, we can set TCR/RCR to desired value
+              // and config MAC lookback mode to normal mode. 2008.08.28.
+              //
+              tmpU4b = read_nic_dword(dev,TCR);
+		write_nic_dword(dev, TCR, (tmpU4b&(~TCR_ICV)));
+
+		tmpU4b = read_nic_dword(dev, RCR);
+		write_nic_dword(dev, RCR,
+			(tmpU4b|RCR_APPFCS|RCR_APP_ICV|RCR_APP_MIC));
+
+		RT_TRACE(COMP_FIRMWARE, "FirmwareCheckReady(): Current RCR settings(%#x)\n", tmpU4b);
+
+#if (defined (RTL8192SU_FPGA_2MAC_VERIFICATION) ||defined (RTL8192SU_ASIC_VERIFICATION))
+#ifdef NOT_YET   //YJ,TMP
+		priv->TransmitConfig = read_nic_dword(dev, TCR);
+		RT_TRACE(COMP_FIRMWARE, "FirmwareCheckReady(): Current TCR settings(%x)\n", priv->TransmitConfig);
+		pHalData->FwRsvdTxPageCfg = read_nic_byte(dev, FW_RSVD_PG_CRTL);
+#endif
+#endif
+
+		// Set to normal mode.
+		write_nic_byte(dev, LBKMD_SEL, LBK_NORMAL);
+
+	}
+
+	RT_TRACE(COMP_FIRMWARE, "<---FirmwareCheckReady(): LoadFWStatus(%d), rtStatus(%x)\n", LoadFWStatus, rtStatus);
+	return (rtStatus == RT_STATUS_SUCCESS) ? true:false;
+}
+
+//
+// Description:   This routine is to update the RF types in FW header partially.
+//
+// Created by Roger, 2008.12.24.
+//
+u8 FirmwareHeaderMapRfType(struct net_device *dev)
+{
+	struct r8192_priv 	*priv = ieee80211_priv(dev);
+	switch(priv->rf_type)
+	{
+		case RF_1T1R: 	return 0x11;
+		case RF_1T2R: 	return 0x12;
+		case RF_2T2R: 	return 0x22;
+		case RF_2T2R_GREEN: 	return 0x92;
+		default:
+			RT_TRACE(COMP_INIT, "Unknown RF type(%x)\n",priv->rf_type);
+			break;
+	}
+	return 0x22;
+}
+
+
+//
+// Description:   This routine is to update the private parts in FW header partially.
+//
+// Created by Roger, 2008.12.18.
+//
+void FirmwareHeaderPriveUpdate(struct net_device *dev, PRT_8192S_FIRMWARE_PRIV 	pFwPriv)
+{
+	struct r8192_priv 	*priv = ieee80211_priv(dev);
+#ifdef RTL8192SU
+	// Update USB endpoint number for RQPN settings.
+	pFwPriv->usb_ep_num = priv->EEPROMUsbEndPointNumber; // endpoint number: 4, 6 and 11.
+	RT_TRACE(COMP_INIT, "FirmwarePriveUpdate(): usb_ep_num(%#x)\n", pFwPriv->usb_ep_num);
+#endif
+
+	// Update RF types for RATR settings.
+	pFwPriv->rf_config = FirmwareHeaderMapRfType(dev);
+}
+
+
+
+bool FirmwareDownload92S(struct net_device *dev)
+{
+	struct r8192_priv 	*priv = ieee80211_priv(dev);
+	bool				rtStatus = true;
+	const char 		*pFwImageFileName[1] = {"RTL8192SU/rtl8192sfw.bin"};
+	u8				*pucMappedFile = NULL;
+	u32				ulFileLength, ulInitStep = 0;
+	u8				FwHdrSize = RT_8192S_FIRMWARE_HDR_SIZE;
+	rt_firmware		*pFirmware = priv->pFirmware;
+	u8				FwStatus = FW_STATUS_INIT;
+	PRT_8192S_FIRMWARE_HDR		pFwHdr = NULL;
+	PRT_8192S_FIRMWARE_PRIV		pFwPriv = NULL;
+	int 				rc;
+	const struct firmware 	*fw_entry;
+	u32				file_length = 0;
+
+	pFirmware->FWStatus = FW_STATUS_INIT;
+
+	RT_TRACE(COMP_FIRMWARE, " --->FirmwareDownload92S()\n");
+
+	//3//
+	//3 //<1> Open Image file, and map file to contineous memory if open file success.
+	//3  //        or read image file from array. Default load from BIN file
+	//3//
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+	priv->firmware_source = FW_SOURCE_HEADER_FILE;
+#else
+	priv->firmware_source = FW_SOURCE_IMG_FILE;// We should decided by Reg.
+#endif
+
+	switch( priv->firmware_source )
+	{
+		case FW_SOURCE_IMG_FILE:
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+			if(pFirmware->szFwTmpBufferLen == 0)
+			{
+
+				rc = request_firmware(&fw_entry, pFwImageFileName[ulInitStep],&priv->udev->dev);//===>1
+				if(rc < 0 ) {
+					RT_TRACE(COMP_ERR, "request firmware fail!\n");
+					goto DownloadFirmware_Fail;
+				}
+
+				if(fw_entry->size > sizeof(pFirmware->szFwTmpBuffer))
+				{
+					RT_TRACE(COMP_ERR, "img file size exceed the container buffer fail!\n");
+					release_firmware(fw_entry);
+					goto DownloadFirmware_Fail;
+				}
+
+				memcpy(pFirmware->szFwTmpBuffer,fw_entry->data,fw_entry->size);
+				pFirmware->szFwTmpBufferLen = fw_entry->size;
+				release_firmware(fw_entry);
+
+				pucMappedFile = pFirmware->szFwTmpBuffer;
+				file_length = pFirmware->szFwTmpBufferLen;
+
+				//Retrieve FW header.
+				pFirmware->pFwHeader = (PRT_8192S_FIRMWARE_HDR) pucMappedFile;
+				pFwHdr = pFirmware->pFwHeader;
+				RT_TRACE(COMP_FIRMWARE,"signature:%x, version:%x, size:%x, imemsize:%x, sram size:%x\n", \
+						pFwHdr->Signature, pFwHdr->Version, pFwHdr->DMEMSize, \
+						pFwHdr->IMG_IMEM_SIZE, pFwHdr->IMG_SRAM_SIZE);
+				pFirmware->FirmwareVersion =  byte(pFwHdr->Version ,0);
+				if ((pFwHdr->IMG_IMEM_SIZE==0) || (pFwHdr->IMG_IMEM_SIZE > sizeof(pFirmware->FwIMEM)))
+				{
+					RT_TRACE(COMP_ERR, "%s: memory for data image is less than IMEM required\n",\
+							__FUNCTION__);
+					goto DownloadFirmware_Fail;
+				} else {
+					pucMappedFile+=FwHdrSize;
+
+					//Retrieve IMEM image.
+					memcpy(pFirmware->FwIMEM, pucMappedFile, pFwHdr->IMG_IMEM_SIZE);
+					pFirmware->FwIMEMLen = pFwHdr->IMG_IMEM_SIZE;
+				}
+
+				if (pFwHdr->IMG_SRAM_SIZE > sizeof(pFirmware->FwEMEM))
+				{
+					RT_TRACE(COMP_ERR, "%s: memory for data image is less than EMEM required\n",\
+							__FUNCTION__);
+					goto DownloadFirmware_Fail;
+				} else {
+					pucMappedFile += pFirmware->FwIMEMLen;
+
+					/* Retriecve EMEM image */
+					memcpy(pFirmware->FwEMEM, pucMappedFile, pFwHdr->IMG_SRAM_SIZE);//===>6
+					pFirmware->FwEMEMLen = pFwHdr->IMG_SRAM_SIZE;
+				}
+
+
+			}
+#endif
+			break;
+
+		case FW_SOURCE_HEADER_FILE:
+#if 1
+#define Rtl819XFwImageArray Rtl8192SUFwImgArray
+			//2008.11.10 Add by tynli.
+			pucMappedFile = Rtl819XFwImageArray;
+			ulFileLength = ImgArrayLength;
+
+			RT_TRACE(COMP_INIT,"Fw download from header.\n");
+			/* Retrieve FW header*/
+			pFirmware->pFwHeader = (PRT_8192S_FIRMWARE_HDR) pucMappedFile;
+			pFwHdr = pFirmware->pFwHeader;
+			RT_TRACE(COMP_FIRMWARE,"signature:%x, version:%x, size:%x, imemsize:%x, sram size:%x\n", \
+					pFwHdr->Signature, pFwHdr->Version, pFwHdr->DMEMSize, \
+					pFwHdr->IMG_IMEM_SIZE, pFwHdr->IMG_SRAM_SIZE);
+			pFirmware->FirmwareVersion =  byte(pFwHdr->Version ,0);
+
+			if ((pFwHdr->IMG_IMEM_SIZE==0) || (pFwHdr->IMG_IMEM_SIZE > sizeof(pFirmware->FwIMEM)))
+			{
+				printk("FirmwareDownload92S(): memory for data image is less than IMEM required\n");
+				goto DownloadFirmware_Fail;
+			} else {
+				pucMappedFile+=FwHdrSize;
+				//Retrieve IMEM image.
+				memcpy(pFirmware->FwIMEM, pucMappedFile, pFwHdr->IMG_IMEM_SIZE);
+				pFirmware->FwIMEMLen = pFwHdr->IMG_IMEM_SIZE;
+			}
+
+			if (pFwHdr->IMG_SRAM_SIZE > sizeof(pFirmware->FwEMEM))
+			{
+				printk(" FirmwareDownload92S(): memory for data image is less than EMEM required\n");
+				goto DownloadFirmware_Fail;
+			} else {
+				pucMappedFile+= pFirmware->FwIMEMLen;
+
+				//Retriecve EMEM image.
+				memcpy(pFirmware->FwEMEM, pucMappedFile, pFwHdr->IMG_SRAM_SIZE);
+				pFirmware->FwEMEMLen = pFwHdr->IMG_SRAM_SIZE;
+			}
+#endif
+			break;
+		default:
+			break;
+	}
+
+	FwStatus = FirmwareGetNextStatus(pFirmware->FWStatus);
+	while(FwStatus!= FW_STATUS_READY)
+	{
+		// Image buffer redirection.
+		switch(FwStatus)
+		{
+			case FW_STATUS_LOAD_IMEM:
+				pucMappedFile = pFirmware->FwIMEM;
+				ulFileLength = pFirmware->FwIMEMLen;
+				break;
+
+			case FW_STATUS_LOAD_EMEM:
+				pucMappedFile = pFirmware->FwEMEM;
+				ulFileLength = pFirmware->FwEMEMLen;
+				break;
+
+			case FW_STATUS_LOAD_DMEM:
+				/* <Roger_Notes> Partial update the content of header private. 2008.12.18 */
+                                pFwHdr = pFirmware->pFwHeader;
+                                pFwPriv = (PRT_8192S_FIRMWARE_PRIV)&pFwHdr->FWPriv;
+				FirmwareHeaderPriveUpdate(dev, pFwPriv);
+				pucMappedFile = (u8*)(pFirmware->pFwHeader)+RT_8192S_FIRMWARE_HDR_EXCLUDE_PRI_SIZE;
+				ulFileLength = FwHdrSize-RT_8192S_FIRMWARE_HDR_EXCLUDE_PRI_SIZE;
+				break;
+
+			default:
+				RT_TRACE(COMP_ERR, "Unexpected Download step!!\n");
+				goto DownloadFirmware_Fail;
+				break;
+		}
+
+		//3//
+		//3// <2> Download image file
+	//3	//
+		rtStatus = FirmwareDownloadCode(dev, pucMappedFile, ulFileLength);
+
+		if(rtStatus != true)
+		{
+			RT_TRACE(COMP_ERR, "FirmwareDownloadCode() fail ! \n" );
+			goto DownloadFirmware_Fail;
+		}
+
+		//3//
+		//3// <3> Check whether load FW process is ready
+	//3	//
+		rtStatus = FirmwareCheckReady(dev, FwStatus);
+
+		if(rtStatus != true)
+		{
+			RT_TRACE(COMP_ERR, "FirmwareDownloadCode() fail ! \n");
+			goto DownloadFirmware_Fail;
+		}
+
+		FwStatus = FirmwareGetNextStatus(pFirmware->FWStatus);
+	}
+
+	RT_TRACE(COMP_FIRMWARE, "Firmware Download Success!!\n");
+	return rtStatus;
+
+	DownloadFirmware_Fail:
+	RT_TRACE(COMP_ERR, "Firmware Download Fail!!%x\n",read_nic_word(dev, TCR));
+	rtStatus = false;
+	return rtStatus;
+}
+#else
+void firmware_init_param(struct net_device *dev)
+{
+	struct r8192_priv 	*priv = ieee80211_priv(dev);
+	rt_firmware		*pfirmware = priv->pFirmware;
+
+	pfirmware->cmdpacket_frag_thresold = GET_COMMAND_PACKET_FRAG_THRESHOLD(MAX_TRANSMIT_BUFFER_SIZE);
+}
+
+/*
+ * segment the img and use the ptr and length to remember info on each segment
+ *
+ */
+bool fw_download_code(struct net_device *dev, u8 *code_virtual_address, u32 buffer_len)
+{
+	struct r8192_priv   *priv = ieee80211_priv(dev);
+	bool 		    rt_status = true;
+	//u16		    frag_threshold;
+	u16		    frag_length, frag_offset = 0;
+	//u16		    total_size;
+	int		    i;
+
+	//rt_firmware	    *pfirmware = priv->pFirmware;
+	struct sk_buff	    *skb;
+	unsigned char	    *seg_ptr;
+	cb_desc		    *tcb_desc;
+	u8                  bLastIniPkt;
+#ifdef RTL8192SE
+	fw_SetRQPN(dev);	// For 92SE only
+#endif
+
+#ifndef RTL8192SU
+	if(buffer_len >= 64000-USB_HWDESC_HEADER_LEN)
+	{
+		return rt_status;
+	}
+	firmware_init_param(dev);
+	//Fragmentation might be required
+	frag_threshold = pfirmware->cmdpacket_frag_thresold;
+#endif
+
+	do {
+#ifndef RTL8192SU
+		if((buffer_len - frag_offset) > frag_threshold) {
+			frag_length = frag_threshold ;
+			bLastIniPkt = 0;
+
+		} else
+#endif
+		{
+			frag_length = buffer_len - frag_offset;
+			bLastIniPkt = 1;
+
+		}
+
+		/* Allocate skb buffer to contain firmware info and tx descriptor info
+		 * add 4 to avoid packet appending overflow.
+		 * */
+		#ifdef RTL8192U
+		skb  = dev_alloc_skb(USB_HWDESC_HEADER_LEN + frag_length + 4);
+		#else
+		skb  = dev_alloc_skb(frag_length + 4);
+		#endif
+		memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev));
+		tcb_desc = (cb_desc*)(skb->cb + MAX_DEV_ADDR_SIZE);
+		tcb_desc->queue_index = TXCMD_QUEUE;
+		tcb_desc->bCmdOrInit = DESC_PACKET_TYPE_INIT;
+		tcb_desc->bLastIniPkt = bLastIniPkt;
+
+		#ifdef RTL8192U
+		skb_reserve(skb, USB_HWDESC_HEADER_LEN);
+		#endif
+		seg_ptr = skb->data;
+		/*
+		 * Transform from little endian to big endian
+                 * and pending  zero
+		 */
+		for(i=0 ; i < frag_length; i+=4) {
+			*seg_ptr++ = ((i+0)<frag_length)?code_virtual_address[i+3]:0;
+			*seg_ptr++ = ((i+1)<frag_length)?code_virtual_address[i+2]:0;
+			*seg_ptr++ = ((i+2)<frag_length)?code_virtual_address[i+1]:0;
+			*seg_ptr++ = ((i+3)<frag_length)?code_virtual_address[i+0]:0;
+		}
+		tcb_desc->txbuf_size= (u16)i;
+		skb_put(skb, i);
+
+		if(!priv->ieee80211->check_nic_enough_desc(dev,tcb_desc->queue_index)||
+			(!skb_queue_empty(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index]))||\
+			(priv->ieee80211->queue_stop) ) {
+			RT_TRACE(COMP_FIRMWARE,"=====================================================> tx full!\n");
+			skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb);
+		} else {
+			priv->ieee80211->softmac_hard_start_xmit(skb,dev);
+		}
+
+		code_virtual_address += frag_length;
+		frag_offset += frag_length;
+
+	}while(frag_offset < buffer_len);
+
+	return rt_status;
+
+#if 0
+cmdsend_downloadcode_fail:
+	rt_status = false;
+	RT_TRACE(COMP_ERR, "CmdSendDownloadCode fail !!\n");
+	return rt_status;
+#endif
+}
+
+bool
+fwSendNullPacket(
+	struct net_device *dev,
+	u32			Length
+)
+{
+	bool	rtStatus = true;
+	struct r8192_priv   *priv = ieee80211_priv(dev);
+	struct sk_buff	    *skb;
+	cb_desc		    *tcb_desc;
+	unsigned char	    *ptr_buf;
+	bool	bLastInitPacket = false;
+
+	//PlatformAcquireSpinLock(dev, RT_TX_SPINLOCK);
+
+	//Get TCB and local buffer from common pool. (It is shared by CmdQ, MgntQ, and USB coalesce DataQ)
+	skb  = dev_alloc_skb(Length+ 4);
+	memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev));
+	tcb_desc = (cb_desc*)(skb->cb + MAX_DEV_ADDR_SIZE);
+	tcb_desc->queue_index = TXCMD_QUEUE;
+	tcb_desc->bCmdOrInit = DESC_PACKET_TYPE_INIT;
+	tcb_desc->bLastIniPkt = bLastInitPacket;
+	ptr_buf = skb_put(skb, Length);
+	memset(ptr_buf,0,Length);
+	tcb_desc->txbuf_size= (u16)Length;
+
+	if(!priv->ieee80211->check_nic_enough_desc(dev,tcb_desc->queue_index)||
+			(!skb_queue_empty(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index]))||\
+			(priv->ieee80211->queue_stop) ) {
+			RT_TRACE(COMP_FIRMWARE,"===================NULL packet==================================> tx full!\n");
+			skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb);
+		} else {
+			priv->ieee80211->softmac_hard_start_xmit(skb,dev);
+		}
+
+	//PlatformReleaseSpinLock(dev, RT_TX_SPINLOCK);
+	return rtStatus;
+}
+
+//-----------------------------------------------------------------------------
+// Procedure:    Check whether main code is download OK. If OK, turn on CPU
+//
+// Description:   CPU register locates in different page against general register.
+//			    Switch to CPU register in the begin and switch back before return
+//
+//
+// Arguments:   The pointer of the dev
+//
+// Returns:
+//        NDIS_STATUS_FAILURE - the following initialization process should be terminated
+//        NDIS_STATUS_SUCCESS - if firmware initialization process success
+//-----------------------------------------------------------------------------
+bool CPUcheck_maincodeok_turnonCPU(struct net_device *dev)
+{
+	bool		rt_status = true;
+	int		check_putcodeOK_time = 200000, check_bootOk_time = 200000;
+	u32	 	CPU_status = 0;
+
+	/* Check whether put code OK */
+	do {
+		CPU_status = read_nic_dword(dev, CPU_GEN);
+
+		if(CPU_status&CPU_GEN_PUT_CODE_OK)
+			break;
+
+	}while(check_putcodeOK_time--);
+
+	if(!(CPU_status&CPU_GEN_PUT_CODE_OK)) {
+		RT_TRACE(COMP_ERR, "Download Firmware: Put code fail!\n");
+		goto CPUCheckMainCodeOKAndTurnOnCPU_Fail;
+	} else {
+		RT_TRACE(COMP_FIRMWARE, "Download Firmware: Put code ok!\n");
+	}
+
+	/* Turn On CPU */
+	CPU_status = read_nic_dword(dev, CPU_GEN);
+	write_nic_byte(dev, CPU_GEN, (u8)((CPU_status|CPU_GEN_PWR_STB_CPU)&0xff));
+	mdelay(1000);
+
+	/* Check whether CPU boot OK */
+	do {
+		CPU_status = read_nic_dword(dev, CPU_GEN);
+
+		if(CPU_status&CPU_GEN_BOOT_RDY)
+			break;
+	}while(check_bootOk_time--);
+
+	if(!(CPU_status&CPU_GEN_BOOT_RDY)) {
+		goto CPUCheckMainCodeOKAndTurnOnCPU_Fail;
+	} else {
+		RT_TRACE(COMP_FIRMWARE, "Download Firmware: Boot ready!\n");
+	}
+
+	return rt_status;
+
+CPUCheckMainCodeOKAndTurnOnCPU_Fail:
+	RT_TRACE(COMP_ERR, "ERR in %s()\n", __FUNCTION__);
+	rt_status = FALSE;
+	return rt_status;
+}
+
+bool CPUcheck_firmware_ready(struct net_device *dev)
+{
+
+	bool		rt_status = true;
+	int		check_time = 200000;
+	u32		CPU_status = 0;
+
+	/* Check Firmware Ready */
+	do {
+		CPU_status = read_nic_dword(dev, CPU_GEN);
+
+		if(CPU_status&CPU_GEN_FIRM_RDY)
+			break;
+
+	}while(check_time--);
+
+	if(!(CPU_status&CPU_GEN_FIRM_RDY))
+		goto CPUCheckFirmwareReady_Fail;
+	else
+		RT_TRACE(COMP_FIRMWARE, "Download Firmware: Firmware ready!\n");
+
+	return rt_status;
+
+CPUCheckFirmwareReady_Fail:
+	RT_TRACE(COMP_ERR, "ERR in %s()\n", __FUNCTION__);
+	rt_status = false;
+	return rt_status;
+
+}
+
+bool init_firmware(struct net_device *dev)
+{
+	struct r8192_priv 	*priv = ieee80211_priv(dev);
+	bool			rt_status = TRUE;
+
+	u8			*firmware_img_buf[3] = { &rtl8190_fwboot_array[0],
+						   	 &rtl8190_fwmain_array[0],
+						   	 &rtl8190_fwdata_array[0]};
+
+	u32			firmware_img_len[3] = { sizeof(rtl8190_fwboot_array),
+						   	sizeof(rtl8190_fwmain_array),
+						   	sizeof(rtl8190_fwdata_array)};
+	u32			file_length = 0;
+	u8			*mapped_file = NULL;
+	u32			init_step = 0;
+	opt_rst_type_e	rst_opt = OPT_SYSTEM_RESET;
+	firmware_init_step_e 	starting_state = FW_INIT_STEP0_BOOT;
+
+	rt_firmware		*pfirmware = priv->pFirmware;
+	const struct firmware 	*fw_entry;
+	const char *fw_name[3] = { "RTL8192U/boot.img",
+                           "RTL8192U/main.img",
+			   "RTL8192U/data.img"};
+	int rc;
+
+	RT_TRACE(COMP_FIRMWARE, " PlatformInitFirmware()==>\n");
+
+	if (pfirmware->firmware_status == FW_STATUS_0_INIT ) {
+		/* it is called by reset */
+		rst_opt = OPT_SYSTEM_RESET;
+		starting_state = FW_INIT_STEP0_BOOT;
+		// TODO: system reset
+
+	}else if(pfirmware->firmware_status == FW_STATUS_5_READY) {
+		/* it is called by Initialize */
+		rst_opt = OPT_FIRMWARE_RESET;
+		starting_state = FW_INIT_STEP2_DATA;
+	}else {
+		 RT_TRACE(COMP_FIRMWARE, "PlatformInitFirmware: undefined firmware state\n");
+	}
+
+	/*
+	 * Download boot, main, and data image for System reset.
+	 * Download data image for firmware reseta
+	 */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+	priv->firmware_source = FW_SOURCE_HEADER_FILE;
+#else
+	priv->firmware_source = FW_SOURCE_IMG_FILE;
+#endif
+	for(init_step = starting_state; init_step <= FW_INIT_STEP2_DATA; init_step++) {
+		/*
+		 * Open Image file, and map file to contineous memory if open file success.
+		 * or read image file from array. Default load from IMG file
+		 */
+		if(rst_opt == OPT_SYSTEM_RESET) {
+			switch(priv->firmware_source) {
+				case FW_SOURCE_IMG_FILE:
+				#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+					rc = request_firmware(&fw_entry, fw_name[init_step],&priv->udev->dev);
+					if(rc < 0 ) {
+						RT_TRACE(COMP_ERR, "request firmware fail!\n");
+						goto download_firmware_fail;
+					}
+
+					if(fw_entry->size > sizeof(pfirmware->firmware_buf)) {
+						RT_TRACE(COMP_ERR, "img file size exceed the container buffer fail!\n");
+						goto download_firmware_fail;
+					}
+
+					if(init_step != FW_INIT_STEP1_MAIN) {
+						memcpy(pfirmware->firmware_buf,fw_entry->data,fw_entry->size);
+						mapped_file = pfirmware->firmware_buf;
+						file_length = fw_entry->size;
+					} else {
+					#ifdef RTL8190P
+						memcpy(pfirmware->firmware_buf,fw_entry->data,fw_entry->size);
+						mapped_file = pfirmware->firmware_buf;
+						file_length = fw_entry->size;
+					#else
+						memset(pfirmware->firmware_buf,0,128);
+						memcpy(&pfirmware->firmware_buf[128],fw_entry->data,fw_entry->size);
+						mapped_file = pfirmware->firmware_buf;
+						file_length = fw_entry->size + 128;
+					#endif
+					}
+					pfirmware->firmware_buf_size = file_length;
+					#endif
+					break;
+
+				case FW_SOURCE_HEADER_FILE:
+					mapped_file =  firmware_img_buf[init_step];
+					file_length  = firmware_img_len[init_step];
+					if(init_step == FW_INIT_STEP2_DATA) {
+						memcpy(pfirmware->firmware_buf, mapped_file, file_length);
+						pfirmware->firmware_buf_size = file_length;
+					}
+					break;
+
+				default:
+					break;
+			}
+
+
+		}else if(rst_opt == OPT_FIRMWARE_RESET ) {
+			/* we only need to download data.img here */
+			mapped_file = pfirmware->firmware_buf;
+			file_length = pfirmware->firmware_buf_size;
+		}
+
+		/* Download image file */
+		/* The firmware download process is just as following,
+		 * 1. that is each packet will be segmented and inserted to the wait queue.
+		 * 2. each packet segment will be put in the skb_buff packet.
+		 * 3. each skb_buff packet data content will already include the firmware info
+		 *   and Tx descriptor info
+		 * */
+		rt_status = fw_download_code(dev,mapped_file,file_length);
+		#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+		if(rst_opt == OPT_SYSTEM_RESET) {
+			release_firmware(fw_entry);
+		}
+		#endif
+
+		if(rt_status != TRUE) {
+			goto download_firmware_fail;
+		}
+
+		switch(init_step) {
+			case FW_INIT_STEP0_BOOT:
+				/* Download boot
+				 * initialize command descriptor.
+				 * will set polling bit when firmware code is also configured
+				 */
+				pfirmware->firmware_status = FW_STATUS_1_MOVE_BOOT_CODE;
+#ifdef RTL8190P
+				// To initialize IMEM, CPU move code  from 0x80000080, hence, we send 0x80 byte packet
+				rt_status = fwSendNullPacket(dev, RTL8190_CPU_START_OFFSET);
+				if(rt_status != true)
+				{
+					RT_TRACE(COMP_INIT, "fwSendNullPacket() fail ! \n");
+					goto  download_firmware_fail;
+				}
+#endif
+				//mdelay(1000);
+				/*
+				 * To initialize IMEM, CPU move code  from 0x80000080,
+				 * hence, we send 0x80 byte packet
+				 */
+				break;
+
+			case FW_INIT_STEP1_MAIN:
+				/* Download firmware code. Wait until Boot Ready and Turn on CPU */
+				pfirmware->firmware_status = FW_STATUS_2_MOVE_MAIN_CODE;
+
+				/* Check Put Code OK and Turn On CPU */
+				rt_status = CPUcheck_maincodeok_turnonCPU(dev);
+				if(rt_status != TRUE) {
+					RT_TRACE(COMP_ERR, "CPUcheck_maincodeok_turnonCPU fail!\n");
+					goto download_firmware_fail;
+				}
+
+				pfirmware->firmware_status = FW_STATUS_3_TURNON_CPU;
+				break;
+
+			case FW_INIT_STEP2_DATA:
+				/* download initial data code */
+				pfirmware->firmware_status = FW_STATUS_4_MOVE_DATA_CODE;
+				mdelay(1);
+
+				rt_status = CPUcheck_firmware_ready(dev);
+				if(rt_status != TRUE) {
+					RT_TRACE(COMP_ERR, "CPUcheck_firmware_ready fail(%d)!\n",rt_status);
+					goto download_firmware_fail;
+				}
+
+				/* wait until data code is initialized ready.*/
+				pfirmware->firmware_status = FW_STATUS_5_READY;
+				break;
+		}
+	}
+
+	RT_TRACE(COMP_FIRMWARE, "Firmware Download Success\n");
+	//assert(pfirmware->firmware_status == FW_STATUS_5_READY, ("Firmware Download Fail\n"));
+
+	return rt_status;
+
+download_firmware_fail:
+	RT_TRACE(COMP_ERR, "ERR in %s()\n", __FUNCTION__);
+	rt_status = FALSE;
+	return rt_status;
+
+}
+#endif
+
diff --git a/drivers/staging/rtl8192su/r8192S_firmware.h b/drivers/staging/rtl8192su/r8192S_firmware.h
new file mode 100644
index 00000000000..047f8ae4474
--- /dev/null
+++ b/drivers/staging/rtl8192su/r8192S_firmware.h
@@ -0,0 +1,212 @@
+#ifndef __INC_FIRMWARE_H
+#define __INC_FIRMWARE_H
+
+
+//#define RTL8190_CPU_START_OFFSET	0x80
+/* TODO: this definition is TBD */
+//#define USB_HWDESC_HEADER_LEN	0
+
+/* It should be double word alignment */
+//#if DEV_BUS_TYPE==PCI_INTERFACE
+//#define GET_COMMAND_PACKET_FRAG_THRESHOLD(v)	4*(v/4) - 8
+//#else
+//#define GET_COMMAND_PACKET_FRAG_THRESHOLD(v)	(4*(v/4) - 8 - USB_HWDESC_HEADER_LEN)
+//#endif
+
+//typedef enum _firmware_init_step{
+//	FW_INIT_STEP0_BOOT = 0,
+//	FW_INIT_STEP1_MAIN = 1,
+//	FW_INIT_STEP2_DATA = 2,
+//}firmware_init_step_e;
+
+//typedef enum _DESC_PACKET_TYPE{
+//	DESC_PACKET_TYPE_INIT = 0,
+//	DESC_PACKET_TYPE_NORMAL = 1,
+//}DESC_PACKET_TYPE;
+#define	RTL8192S_FW_PKT_FRAG_SIZE		0xFF00	// 64K
+
+
+#define 	RTL8190_MAX_FIRMWARE_CODE_SIZE	64000	//64k
+#define	MAX_FIRMWARE_CODE_SIZE	0xFF00 // Firmware Local buffer size.
+#define 	RTL8190_CPU_START_OFFSET			0x80
+
+#ifdef RTL8192SE
+//It should be double word alignment
+#define GET_COMMAND_PACKET_FRAG_THRESHOLD(v)	4*(v/4) - 8
+#else
+#define GET_COMMAND_PACKET_FRAG_THRESHOLD(v)	(4*(v/4) - 8 - USB_HWDESC_HEADER_LEN)
+#endif
+
+//typedef enum _DESC_PACKET_TYPE{
+//	DESC_PACKET_TYPE_INIT = 0,
+//	DESC_PACKET_TYPE_NORMAL = 1,
+//}DESC_PACKET_TYPE;
+
+// Forward declaration.
+//typedef	struct _ADAPTER	ADAPTER, *PADAPTER;
+#ifdef RTL8192S
+typedef enum _firmware_init_step{
+	FW_INIT_STEP0_IMEM = 0,
+	FW_INIT_STEP1_MAIN = 1,
+	FW_INIT_STEP2_DATA = 2,
+}firmware_init_step_e;
+#else
+typedef enum _firmware_init_step{
+	FW_INIT_STEP0_BOOT = 0,
+	FW_INIT_STEP1_MAIN = 1,
+	FW_INIT_STEP2_DATA = 2,
+}firmware_init_step_e;
+#endif
+
+/* due to rtl8192 firmware */
+typedef enum _desc_packet_type_e{
+	DESC_PACKET_TYPE_INIT = 0,
+	DESC_PACKET_TYPE_NORMAL = 1,
+}desc_packet_type_e;
+
+typedef enum _firmware_source{
+	FW_SOURCE_IMG_FILE = 0,
+	FW_SOURCE_HEADER_FILE = 1,
+}firmware_source_e, *pfirmware_source_e;
+
+
+typedef enum _opt_rst_type{
+	OPT_SYSTEM_RESET = 0,
+	OPT_FIRMWARE_RESET = 1,
+}opt_rst_type_e;
+
+/*typedef enum _FIRMWARE_STATUS{
+	FW_STATUS_0_INIT = 0,
+	FW_STATUS_1_MOVE_BOOT_CODE = 1,
+	FW_STATUS_2_MOVE_MAIN_CODE = 2,
+	FW_STATUS_3_TURNON_CPU = 3,
+	FW_STATUS_4_MOVE_DATA_CODE = 4,
+	FW_STATUS_5_READY = 5,
+}FIRMWARE_STATUS;
+*/
+//--------------------------------------------------------------------------------
+// RTL8192S Firmware related, Revised by Roger, 2008.12.18.
+//--------------------------------------------------------------------------------
+typedef  struct _RT_8192S_FIRMWARE_PRIV { //8-bytes alignment required
+
+	//--- long word 0 ----
+	u8		signature_0;		//0x12: CE product, 0x92: IT product
+	u8		signature_1;		//0x87: CE product, 0x81: IT product
+	u8		hci_sel;			//0x81: PCI-AP, 01:PCIe, 02: 92S-U, 0x82: USB-AP, 0x12: 72S-U, 03:SDIO
+	u8		chip_version;	//the same value as reigster value
+	u8		customer_ID_0;	//customer  ID low byte
+	u8		customer_ID_1;	//customer  ID high byte
+	u8		rf_config;		//0x11:  1T1R, 0x12: 1T2R, 0x92: 1T2R turbo, 0x22: 2T2R
+	u8		usb_ep_num;	// 4: 4EP, 6: 6EP, 11: 11EP
+
+	//--- long word 1 ----
+	u8		regulatory_class_0;	//regulatory class bit map 0
+	u8		regulatory_class_1;	//regulatory class bit map 1
+	u8		regulatory_class_2;	//regulatory class bit map 2
+	u8		regulatory_class_3;	//regulatory class bit map 3
+	u8		rfintfs;				// 0:SWSI, 1:HWSI, 2:HWPI
+	u8		def_nettype;
+	u8		rsvd010;
+	u8		rsvd011;
+
+
+	//--- long word 2 ----
+	u8		lbk_mode;	//0x00: normal, 0x03: MACLBK, 0x01: PHYLBK
+	u8		mp_mode;	// 1: for MP use, 0: for normal driver (to be discussed)
+	u8		rsvd020;
+	u8		rsvd021;
+	u8		rsvd022;
+	u8		rsvd023;
+	u8		rsvd024;
+	u8		rsvd025;
+
+	//--- long word 3 ----
+	u8		qos_en;				// QoS enable
+	u8		bw_40MHz_en;		// 40MHz BW enable
+	u8		AMSDU2AMPDU_en;	// 4181 convert AMSDU to AMPDU, 0: disable
+	u8		AMPDU_en;			// 11n AMPDU enable
+	u8		rate_control_offload;//FW offloads, 0: driver handles
+	u8		aggregation_offload;	// FW offloads, 0: driver handles
+	u8		rsvd030;
+	u8		rsvd031;
+
+
+	//--- long word 4 ----
+	unsigned char		beacon_offload;			// 1. FW offloads, 0: driver handles
+	unsigned char		MLME_offload;			// 2. FW offloads, 0: driver handles
+	unsigned char		hwpc_offload;			// 3. FW offloads, 0: driver handles
+	unsigned char		tcp_checksum_offload;	// 4. FW offloads, 0: driver handles
+	unsigned char		tcp_offload;				// 5. FW offloads, 0: driver handles
+	unsigned char		ps_control_offload;		// 6. FW offloads, 0: driver handles
+	unsigned char		WWLAN_offload;			// 7. FW offloads, 0: driver handles
+	unsigned char		rsvd040;
+
+	//--- long word 5 ----
+	u8		tcp_tx_frame_len_L;		//tcp tx packet length low byte
+	u8		tcp_tx_frame_len_H;		//tcp tx packet length high byte
+	u8		tcp_rx_frame_len_L;		//tcp rx packet length low byte
+	u8		tcp_rx_frame_len_H;		//tcp rx packet length high byte
+	u8		rsvd050;
+	u8		rsvd051;
+	u8		rsvd052;
+	u8		rsvd053;
+}RT_8192S_FIRMWARE_PRIV, *PRT_8192S_FIRMWARE_PRIV;
+
+typedef struct _RT_8192S_FIRMWARE_HDR {//8-byte alinment required
+
+	//--- LONG WORD 0 ----
+	u16		Signature;
+	u16		Version;		  //0x8000 ~ 0x8FFF for FPGA version, 0x0000 ~ 0x7FFF for ASIC version,
+	u32		DMEMSize;    //define the size of boot loader
+
+
+	//--- LONG WORD 1 ----
+	u32		IMG_IMEM_SIZE;    //define the size of FW in IMEM
+	u32		IMG_SRAM_SIZE;    //define the size of FW in SRAM
+
+	//--- LONG WORD 2 ----
+	u32		FW_PRIV_SIZE;       //define the size of DMEM variable
+	u32		Rsvd0;
+
+	//--- LONG WORD 3 ----
+	u32		Rsvd1;
+	u32		Rsvd2;
+
+	RT_8192S_FIRMWARE_PRIV	FWPriv;
+
+}RT_8192S_FIRMWARE_HDR, *PRT_8192S_FIRMWARE_HDR;
+
+#define	RT_8192S_FIRMWARE_HDR_SIZE	80
+#define   RT_8192S_FIRMWARE_HDR_EXCLUDE_PRI_SIZE	32
+
+typedef enum _FIRMWARE_8192S_STATUS{
+	FW_STATUS_INIT = 0,
+	FW_STATUS_LOAD_IMEM = 1,
+	FW_STATUS_LOAD_EMEM = 2,
+	FW_STATUS_LOAD_DMEM = 3,
+	FW_STATUS_READY = 4,
+}FIRMWARE_8192S_STATUS;
+
+#define RTL8190_MAX_FIRMWARE_CODE_SIZE  64000   //64k
+
+typedef struct _rt_firmware{
+	firmware_source_e	eFWSource;
+	PRT_8192S_FIRMWARE_HDR	pFwHeader;
+	FIRMWARE_8192S_STATUS	FWStatus;
+	u16             FirmwareVersion;
+	u8		FwIMEM[RTL8190_MAX_FIRMWARE_CODE_SIZE];
+	u8		FwEMEM[RTL8190_MAX_FIRMWARE_CODE_SIZE];
+	u32		FwIMEMLen;
+	u32		FwEMEMLen;
+	u8		szFwTmpBuffer[164000];
+        u32             szFwTmpBufferLen;
+	u16		CmdPacketFragThresold;
+}rt_firmware, *prt_firmware;
+
+//typedef struct _RT_FIRMWARE_INFO_8192SU{
+//	u8		szInfo[16];
+//}RT_FIRMWARE_INFO_8192SU, *PRT_FIRMWARE_INFO_8192SU;
+bool FirmwareDownload92S(struct net_device *dev);
+
+#endif
+
diff --git a/drivers/staging/rtl8192su/r8192S_hw.h b/drivers/staging/rtl8192su/r8192S_hw.h
new file mode 100644
index 00000000000..7a3d850de0b
--- /dev/null
+++ b/drivers/staging/rtl8192su/r8192S_hw.h
@@ -0,0 +1,1677 @@
+/*****************************************************************************
+ *	Copyright(c) 2008,  RealTEK Technology Inc. All Right Reserved.
+ *
+ * Module:	__INC_HAL8192SEREG_H
+ *
+ *
+ * Note:	1. Define Mac register address and corresponding bit mask map
+ *			2. CCX register
+ *			3. Backward compatible register with useless address.
+ *			4. Define 92SU required register address and definition.
+ *
+ *
+ * Export:	Constants, macro, functions(API), global variables(None).
+ *
+ * Abbrev:
+ *
+ * History:
+ *		Data		Who		Remark
+ *      08/07/2007  MHC    	1. Porting from 9x series PHYCFG.h.
+ *							2. Reorganize code architecture.
+ *
+ *****************************************************************************/
+#ifndef R8192S_HW
+#define R8192S_HW
+
+typedef enum _VERSION_8192S{
+	VERSION_8192S_ACUT,
+	VERSION_8192S_BCUT,
+	VERSION_8192S_CCUT
+}VERSION_8192S,*PVERSION_8192S;
+
+//#ifdef RTL8192SU
+typedef enum _VERSION_8192SUsb{
+	VERSION_8192SU_A, //A-Cut
+	VERSION_8192SU_B, //B-Cut
+	VERSION_8192SU_C, //C-Cut
+}VERSION_8192SUsb, *PVERSION_8192SUsb;
+//#else
+typedef enum _VERSION_819xU{
+	VERSION_819xU_A, // A-cut
+	VERSION_819xU_B, // B-cut
+	VERSION_819xU_C,// C-cut
+}VERSION_819xU,*PVERSION_819xU;
+//#endif
+
+/* 2007/11/15 MH Define different RF type. */
+typedef	enum _RT_RF_TYPE_DEFINITION
+{
+	RF_1T2R = 0,
+	RF_2T4R,
+	RF_2T2R,
+#ifdef RTL8192SU
+	RF_1T1R,
+	RF_2T2R_GREEN,
+#endif
+	//RF_3T3R,
+	//RF_3T4R,
+	//RF_4T4R,
+	RF_819X_MAX_TYPE
+}RT_RF_TYPE_DEF_E;
+
+typedef enum _BaseBand_Config_Type{
+	BaseBand_Config_PHY_REG = 0,			//Radio Path A
+	BaseBand_Config_AGC_TAB = 1,			//Radio Path B
+}BaseBand_Config_Type, *PBaseBand_Config_Type;
+
+#if 0
+typedef enum _RT_RF_TYPE_819xU{
+	RF_TYPE_MIN = 0,
+	RF_8225,
+	RF_8256,
+	RF_8258,
+	RF_PSEUDO_11N = 4,
+}RT_RF_TYPE_819xU, *PRT_RF_TYPE_819xU;
+#endif
+
+#define	RTL8187_REQT_READ		0xc0
+#define	RTL8187_REQT_WRITE	0x40
+#define	RTL8187_REQ_GET_REGS	0x05
+#define	RTL8187_REQ_SET_REGS	0x05
+
+#define MAX_TX_URB 5
+#define MAX_RX_URB 16
+
+#define R8180_MAX_RETRY 255
+//#define MAX_RX_NORMAL_URB 3
+//#define MAX_RX_COMMAND_URB 2
+#define RX_URB_SIZE 		9100
+
+#define BB_ANTATTEN_CHAN14	0x0c
+#define BB_ANTENNA_B 		0x40
+
+#define BB_HOST_BANG 		(1<<30)
+#define BB_HOST_BANG_EN 	(1<<2)
+#define BB_HOST_BANG_CLK 	(1<<1)
+#define BB_HOST_BANG_RW 	(1<<3)
+#define BB_HOST_BANG_DATA	1
+
+
+//============================================================
+//       8192S Regsiter bit
+//============================================================
+#define	BB_GLOBAL_RESET_BIT	0x1
+
+#define CR_RST			0x10
+#define CR_RE			0x08
+#define CR_TE			0x04
+#define CR_MulRW			0x01
+
+#define MAC_FILTER_MASK ((1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<5) | \
+		(1<<12) | (1<<18) | (1<<19) | (1<<20) | (1<<21) | (1<<22) | (1<<23))
+
+#define RX_FIFO_THRESHOLD_MASK 	((1<<13) | (1<<14) | (1<<15))
+#define RX_FIFO_THRESHOLD_SHIFT 	13
+#define RX_FIFO_THRESHOLD_128 		3
+#define RX_FIFO_THRESHOLD_256 		4
+#define RX_FIFO_THRESHOLD_512 		5
+#define RX_FIFO_THRESHOLD_1024 		6
+#define RX_FIFO_THRESHOLD_NONE 	7
+
+#define MAX_RX_DMA_MASK ((1<<8) | (1<<9) | (1<<10))
+
+//----------------------------------------------------------------------------
+//       8190 CPU General Register		(offset 0x100, 4 byte)
+//----------------------------------------------------------------------------
+#define	CPU_CCK_LOOPBACK			0x00030000
+#define	CPU_GEN_SYSTEM_RESET		0x00000001
+#define	CPU_GEN_FIRMWARE_RESET	0x00000008
+#define	CPU_GEN_BOOT_RDY			0x00000010
+#define	CPU_GEN_FIRM_RDY			0x00000020
+#define	CPU_GEN_PUT_CODE_OK		0x00000080
+#define	CPU_GEN_BB_RST				0x00000100
+#define	CPU_GEN_PWR_STB_CPU		0x00000004
+#define 	CPU_GEN_NO_LOOPBACK_MSK	0xFFF8FFFF // Set bit18,17,16 to 0. Set bit19
+#define	CPU_GEN_NO_LOOPBACK_SET	0x00080000 // Set BIT19 to 1
+//----------------------------------------------------------------------------
+////
+////       8190 AcmHwCtrl bits                                    (offset 0x171, 1 byte)
+////----------------------------------------------------------------------------
+#define MSR_LINK_MASK      	((1<<0)|(1<<1))
+#define MSR_LINK_MANAGED   	2
+#define MSR_LINK_NONE      	0
+#define MSR_LINK_SHIFT     	0
+#define MSR_LINK_ADHOC     	1
+#define MSR_LINK_MASTER    	3
+#define MSR_LINK_ENEDCA	   	(1<<4)
+
+
+//#define Cmd9346CR_9356SEL	(1<<4)
+#define EPROM_CMD_RESERVED_MASK 			(1<<5)
+#define EPROM_CMD_OPERATING_MODE_SHIFT 	6
+#define EPROM_CMD_OPERATING_MODE_MASK 	((1<<7)|(1<<6))
+#define EPROM_CMD_CONFIG 		0x3
+#define EPROM_CMD_NORMAL 		0
+#define EPROM_CMD_LOAD 			1
+#define EPROM_CMD_PROGRAM		2
+#define EPROM_CS_SHIFT 			3
+#define EPROM_CK_SHIFT 			2
+#define EPROM_W_SHIFT 			1
+#define EPROM_R_SHIFT 			0
+
+//#define	MAC0 			 0x000,
+//#define	MAC1 			 0x001,
+//#define	MAC2 			 0x002,
+//#define	MAC3 			 0x003,
+//#define	MAC4 			 0x004,
+//#define	MAC5 			 0x005,
+
+//============================================================
+//       8192S Regsiter offset definition
+//============================================================
+
+//
+// MAC register 0x0 - 0x5xx
+// 1. System configuration registers.
+// 2. Command Control Registers
+// 3. MACID Setting Registers
+// 4. Timing Control Registers
+// 5. FIFO Control Registers
+// 6. Adaptive Control Registers
+// 7. EDCA Setting Registers
+// 8. WMAC, BA and CCX related Register.
+// 9. Security Control Registers
+// 10. Power Save Control Registers
+// 11. General Purpose Registers
+// 12. Host Interrupt Status Registers
+// 13. Test Mode and Debug Control Registers
+// 14. PCIE config register
+//
+
+
+//
+// 1. System Configuration Registers	 (Offset: 0x0000 - 0x003F)
+//
+#define		SYS_ISO_CTRL		0x0000	// System Isolation Interface Control.
+#define		SYS_FUNC_EN		0x0002	// System Function Enable.
+#define		PMC_FSM			0x0004	// Power Sequence Control.
+#define		SYS_CLKR			0x0008	// System Clock.
+#define		EPROM_CMD			0x000A	// 93C46/93C56 Command Register. (win CR93C46)
+#define		EE_VPD				0x000C	// EEPROM VPD Data.
+#define		AFE_MISC			0x0010	// AFE Misc.
+#define		SPS0_CTRL			0x0011	// Switching Power Supply 0 Control.
+#define		SPS1_CTRL			0x0018	// Switching Power Supply 1 Control.
+#define		RF_CTRL				0x001F	// RF Block Control.
+#define		LDOA15_CTRL		0x0020	// V15 Digital LDO Control.
+#define		LDOV12D_CTRL		0x0021	// V12 Digital LDO Control.
+#define		LDOHCI12_CTRL		0x0022	// V12 Digital LDO Control.
+#define		LDO_USB_SDIO		0x0023	// LDO USB Control.
+#define		LPLDO_CTRL			0x0024	// Low Power LDO Control.
+#define		AFE_XTAL_CTRL		0x0026	// AFE Crystal Control.
+#define		AFE_PLL_CTRL		0x0028	// System Function Enable.
+#define		EFUSE_CTRL			0x0030	// E-Fuse Control.
+#define		EFUSE_TEST			0x0034	// E-Fuse Test.
+#define		PWR_DATA			0x0038	// Power on date.
+#define		DBG_PORT			0x003A	// MAC debug port select
+#define		DPS_TIMER			0x003C	// Deep Power Save Timer Register.
+#define		RCLK_MON			0x003E	// Retention Clock Monitor.
+
+//
+// 2. Command Control Registers	 (Offset: 0x0040 - 0x004F)
+//
+#define		CMDR				0x0040	// MAC Command Register.
+#define		TXPAUSE				0x0042	// Transmission Pause Register.
+#define		LBKMD_SEL			0x0043	// Loopback Mode Select Register.
+#define		TCR					0x0044	// Transmit Configuration Register
+#define		RCR					0x0048	// Receive Configuration Register
+#define		MSR					0x004C	// Media Status register
+#define		SYSF_CFG			0x004D	// System Function Configuration.
+#define		RX_PKY_LIMIT		0x004E	// RX packet length limit
+#define		MBIDCTRL			0x004F	// MBSSID Control.
+
+//
+// 3. MACID Setting Registers	(Offset: 0x0050 - 0x007F)
+//
+#define		MACIDR				0x0050	// MAC ID Register, Offset 0x0050-0x0055
+#define		MACIDR0				0x0050	// MAC ID Register, Offset 0x0050-0x0053
+#define		MACIDR4				0x0054	// MAC ID Register, Offset 0x0054-0x0055
+#define		BSSIDR				0x0058	// BSSID Register, Offset 0x0058-0x005D
+#define		HWVID				0x005E	// HW Version ID.
+#define		MAR					0x0060	// Multicase Address.
+#define		MBIDCAMCONTENT	0x0068	// MBSSID CAM Content.
+#define		MBIDCAMCFG			0x0070	// MBSSID CAM Configuration.
+#define		BUILDTIME			0x0074	// Build Time Register.
+#define		BUILDUSER			0x0078	// Build User Register.
+
+// Redifine MACID register, to compatible prior ICs.
+#define		IDR0				MACIDR0
+#define		IDR4				MACIDR4
+
+//
+// 4. Timing Control Registers	(Offset: 0x0080 - 0x009F)
+//
+#define		TSFR				0x0080	// Timing Sync Function Timer Register.
+#define		SLOT_TIME			0x0089	// Slot Time Register, in us.
+#define		USTIME				0x008A	// EDCA/TSF clock unit time us unit.
+#define		SIFS_CCK			0x008C	// SIFS for CCK, in us.
+#define		SIFS_OFDM			0x008E	// SIFS for OFDM, in us.
+#define		PIFS_TIME			0x0090	// PIFS time register.
+#define		ACK_TIMEOUT		0x0091	// Ack Timeout Register
+#define		EIFSTR				0x0092	// EIFS time regiser.
+#define		BCN_INTERVAL		0x0094	// Beacon Interval, in TU.
+#define		ATIMWND			0x0096	// ATIM Window width, in TU.
+#define		BCN_DRV_EARLY_INT	0x0098	// Driver Early Interrupt.
+#define		BCN_DMATIME		0x009A	// Beacon DMA and ATIM INT Time.
+#define		BCN_ERR_THRESH		0x009C	// Beacon Error Threshold.
+#define		MLT					0x009D	// MSDU Lifetime.
+#define		RSVD_MAC_TUNE_US	0x009E	// MAC Internal USE.
+
+//
+// 5. FIFO Control Registers	 (Offset: 0x00A0 - 0x015F)
+//
+#define 	RQPN				0x00A0
+#define	RQPN1				0x00A0	// Reserved Queue Page Number for BK
+#define	RQPN2				0x00A1	// Reserved Queue Page Number for BE
+#define	RQPN3				0x00A2	// Reserved Queue Page Number for VI
+#define	RQPN4				0x00A3	// Reserved Queue Page Number for VO
+#define	RQPN5				0x00A4	// Reserved Queue Page Number for HCCA
+#define	RQPN6				0x00A5	// Reserved Queue Page Number for CMD
+#define	RQPN7				0x00A6	// Reserved Queue Page Number for MGNT
+#define	RQPN8				0x00A7	// Reserved Queue Page Number for HIGH
+#define	RQPN9				0x00A8	// Reserved Queue Page Number for Beacon
+#define	RQPN10				0x00A9	// Reserved Queue Page Number for Public
+#define		LD_RQPN				0x00AB  //
+#define		RXFF_BNDY			0x00AC  //
+#define		RXRPT_BNDY			0x00B0  //
+#define		TXPKTBUF_PGBNDY		0x00B4  //
+#define		PBP					0x00B5  //
+#define		RXDRVINFO_SZ		0x00B6  //
+#define		TXFF_STATUS			0x00B7  //
+#define		RXFF_STATUS			0x00B8  //
+#define		TXFF_EMPTY_TH		0x00B9  //
+#define		SDIO_RX_BLKSZ		0x00BC  //
+#define		RXDMA				0x00BD  //
+#define		RXPKT_NUM			0x00BE  //
+#define		C2HCMD_UDT_SIZE		0x00C0  //
+#define		C2HCMD_UDT_ADDR		0x00C2  //
+#define		FIFOPAGE1			0x00C4  // Available public queue page number
+#define		FIFOPAGE2			0x00C8  //
+#define		FIFOPAGE3			0x00CC  //
+#define		FIFOPAGE4			0x00D0  //
+#define		FIFOPAGE5			0x00D4  //
+#define		FW_RSVD_PG_CRTL		0x00D8  //
+#define		RXDMA_AGG_PG_TH		0x00D9  //
+#define		TXRPTFF_RDPTR		0x00E0  //
+#define		TXRPTFF_WTPTR		0x00E4  //
+#define		C2HFF_RDPTR			0x00E8	//FIFO Read pointer register.
+#define		C2HFF_WTPTR			0x00EC	//FIFO Write pointer register.
+#define		RXFF0_RDPTR			0x00F0	//
+#define		RXFF0_WTPTR			0x00F4  //
+#define		RXFF1_RDPTR			0x00F8  //
+#define		RXFF1_WTPTR			0x00FC  //
+#define		RXRPT0_RDPTR		0x0100  //
+#define		RXRPT0_WTPTR		0x0104  //
+#define		RXRPT1_RDPTR		0x0108  //
+#define		RXRPT1_WTPTR		0x010C  //
+#define		RX0_UDT_SIZE		0x0110  //
+#define		RX1PKTNUM			0x0114  //
+#define		RXFILTERMAP			0x0116  //
+#define		RXFILTERMAP_GP1		0x0118  //
+#define		RXFILTERMAP_GP2		0x011A  //
+#define		RXFILTERMAP_GP3		0x011C  //
+#define		BCNQ_CTRL			0x0120  //
+#define		MGTQ_CTRL			0x0124  //
+#define		HIQ_CTRL			0x0128  //
+#define		VOTID7_CTRL			0x012c  //
+#define		VOTID6_CTRL			0x0130  //
+#define		VITID5_CTRL			0x0134  //
+#define		VITID4_CTRL			0x0138  //
+#define		BETID3_CTRL			0x013c  //
+#define		BETID0_CTRL			0x0140  //
+#define		BKTID2_CTRL			0x0144  //
+#define		BKTID1_CTRL			0x0148  //
+#define		CMDQ_CTRL			0x014c  //
+#define		TXPKT_NUM_CTRL		0x0150  //
+#define		TXQ_PGADD			0x0152  //
+#define		TXFF_PG_NUM			0x0154  //
+#define		TRXDMA_STATUS		0x0156  //
+
+//
+// 6. Adaptive Control Registers  (Offset: 0x0160 - 0x01CF)
+//
+#define		INIMCS_SEL			0x0160	// Init MCSrate for 32 MACID 0x160-17f
+#define		TX_RATE_REG		INIMCS_SEL //Current Tx rate register
+#define		INIRTSMCS_SEL		0x0180	// Init RTSMCSrate
+#define		RRSR				0x0181	// Response rate setting.
+#define		ARFR0				0x0184	// Auto Rate Fallback 0 Register.
+#define		ARFR1				0x0188	//
+#define		ARFR2				0x018C  //
+#define		ARFR3				0x0190  //
+#define		ARFR4				0x0194  //
+#define		ARFR5				0x0198  //
+#define		ARFR6				0x019C  //
+#define		ARFR7				0x01A0  //
+#define		AGGLEN_LMT_H		0x01A7	// Aggregation Length Limit for High-MCS
+#define		AGGLEN_LMT_L		0x01A8	// Aggregation Length Limit for Low-MCS.
+#define		DARFRC				0x01B0	// Data Auto Rate Fallback Retry Count.
+#define		RARFRC				0x01B8	// Response Auto Rate Fallback Count.
+#define		MCS_TXAGC			0x01C0
+#define		CCK_TXAGC			0x01C8
+
+//
+// 7. EDCA Setting Registers	 (Offset: 0x01D0 - 0x01FF)
+//
+#define		EDCAPARA_VO 		0x01D0	// EDCA Parameter Register for VO queue.
+#define		EDCAPARA_VI			0x01D4	// EDCA Parameter Register for VI queue.
+#define		EDCAPARA_BE			0x01D8	// EDCA Parameter Register for BE queue.
+#define		EDCAPARA_BK			0x01DC	// EDCA Parameter Register for BK queue.
+#define		BCNTCFG				0x01E0	// Beacon Time Configuration Register.
+#define		CWRR				0x01E2	// Contention Window Report Register.
+#define		ACMAVG				0x01E4	// ACM Average Register.
+#define		AcmHwCtrl			0x01E7
+#define		VO_ADMTM			0x01E8	// Admission Time Register.
+#define		VI_ADMTM			0x01EC
+#define		BE_ADMTM			0x01F0
+#define		RETRY_LIMIT			0x01F4	// Retry Limit Registers[15:8]-short, [7:0]-long
+#define		SG_RATE				0x01F6	// Max MCS Rate Available Register, which we Set the hightst SG rate.
+
+//
+// 8. WMAC, BA and CCX related Register.	 (Offset: 0x0200 - 0x023F)
+//
+#define		NAV_CTRL			0x0200
+#define		BW_OPMODE			0x0203
+#define		BACAMCMD			0x0204
+#define		BACAMCONTENT		0x0208	// Block ACK CAM R/W Register.
+
+// Roger had defined the 0x2xx register WMAC definition
+#define		LBDLY				0x0210	// Loopback Delay Register.
+#define		FWDLY				0x0211	// FW Delay Register.
+#define		HWPC_RX_CTRL		0x0218	// HW Packet Conversion RX Control Reg
+#define		MQIR				0x0220	// Mesh Qos Type Indication Register.
+#define		MAIR				0x0222	// Mesh ACK.
+#define		MSIR				0x0224	// Mesh HW Security Requirement Indication Reg
+#define		CLM_RESULT			0x0227	// CCA Busy Fraction(Channel Load)
+#define		NHM_RPI_CNT			0x0228	// Noise Histogram Measurement (NHM) RPI Report.
+#define		RXERR_RPT			0x0230	// Rx Error Report.
+#define		NAV_PROT_LEN		0x0234	// NAV Protection Length.
+#define		CFEND_TH			0x0236	// CF-End Threshold.
+#define		AMPDU_MIN_SPACE		0x0237	// AMPDU Min Space.
+#define		TXOP_STALL_CTRL		0x0238
+
+//
+// 9. Security Control Registers	(Offset: 0x0240 - 0x025F)
+//
+#define		RWCAM				0x0240	//IN 8190 Data Sheet is called CAMcmd
+#define		WCAMI				0x0244	// Software write CAM input content
+#define		RCAMO				0x0248	// Software read/write CAM config
+#define		CAMDBG				0x024C
+#define		SECR				0x0250	//Security Configuration Register
+
+//
+// 10. Power Save Control Registers	 (Offset: 0x0260 - 0x02DF)
+//
+#define		WOW_CTRL			0x0260	//Wake On WLAN Control.
+#define		PSSTATUS			0x0261	// Power Save Status.
+#define		PSSWITCH			0x0262	// Power Save Switch.
+#define		MIMOPS_WAIT_PERIOD	0x0263
+#define		LPNAV_CTRL			0x0264
+#define		WFM0				0x0270	// Wakeup Frame Mask.
+#define		WFM1				0x0280	//
+#define		WFM2				0x0290  //
+#define		WFM3				0x02A0  //
+#define		WFM4				0x02B0  //
+#define		WFM5				0x02C0  // FW Control register.
+#define		WFCRC				0x02D0	// Wakeup Frame CRC.
+#define		RPWM				0x02DC	// Host Request Power Mode.
+#define		CPWM				0x02DD	// Current Power Mode.
+#define		FW_RPT_REG			0x02c4
+
+//
+// 11. General Purpose Registers	(Offset: 0x02E0 - 0x02FF)
+//
+#define		PSTIME				0x02E0  // Power Save Timer Register
+#define		TIMER0				0x02E4  //
+#define		TIMER1				0x02E8  //
+#define		GPIO_CTRL			0x02EC  // GPIO Control Register
+#define		GPIO_IN				0x02EC	// GPIO pins input value
+#define		GPIO_OUT			0x02ED	// GPIO pins output value
+#define		GPIO_IO_SEL			0x02EE	// GPIO pins output enable when a bit is set to "1"; otherwise, input is configured.
+#define		GPIO_MOD			0x02EF	//
+#define		GPIO_INTCTRL		0x02F0  // GPIO Interrupt Control Register[7:0]
+#define		MAC_PINMUX_CFG		0x02F1  // MAC PINMUX Configuration Reg[7:0]
+#define		LEDCFG				0x02F2  // System PINMUX Configuration Reg[7:0]
+#define		PHY_REG				0x02F3  // RPT: PHY REG Access Report Reg[7:0]
+#define		PHY_REG_DATA		0x02F4  // PHY REG Read DATA Register [31:0]
+#define		EFUSE_CLK			0x02F8  // CTRL: E-FUSE Clock Control Reg[7:0]
+//#define		GPIO_INTCTRL		0x02F9  // GPIO Interrupt Control Register[7:0]
+
+//
+// 12. Host Interrupt Status Registers	 (Offset: 0x0300 - 0x030F)
+//
+#define		IMR					0x0300	// Interrupt Mask Register
+#define		ISR					0x0308	// Interrupt Status Register
+
+//
+// 13. Test Mode and Debug Control Registers	(Offset: 0x0310 - 0x034F)
+//
+#define		DBG_PORT_SWITCH		0x003A
+#define		BIST				0x0310	// Bist reg definition
+#define		DBS					0x0314	// Debug Select ???
+#define		CPUINST				0x0318	// CPU Instruction Read Register
+#define		CPUCAUSE			0x031C	// CPU Cause Register
+#define		LBUS_ERR_ADDR		0x0320	// Lexra Bus Error Address Register
+#define		LBUS_ERR_CMD		0x0324	// Lexra Bus Error Command Register
+#define		LBUS_ERR_DATA_L		0x0328	// Lexra Bus Error Data Low DW Register
+#define		LBUS_ERR_DATA_H		0x032C	//
+#define		LX_EXCEPTION_ADDR	0x0330	// Lexra Bus Exception Address Register
+#define		WDG_CTRL			0x0334	// Watch Dog Control Register
+#define		INTMTU				0x0338	// Interrupt Mitigation Time Unit Reg
+#define		INTM				0x033A	// Interrupt Mitigation Register
+#define		FDLOCKTURN0			0x033C	// FW/DRV Lock Turn 0 Register
+#define		FDLOCKTURN1			0x033D	// FW/DRV Lock Turn 1 Register
+#define		TRXPKTBUF_DBG_DATA	0x0340	// TRX Packet Buffer Debug Data Register
+#define		TRXPKTBUF_DBG_CTRL	0x0348	// TRX Packet Buffer Debug Control Reg
+#define		DPLL				0x034A	// DPLL Monitor Register [15:0]
+#define		CBUS_ERR_ADDR		0x0350	// CPU Bus Error Address Register
+#define		CBUS_ERR_CMD		0x0354	// CPU Bus Error Command Register
+#define		CBUS_ERR_DATA_L		0x0358	// CPU Bus Error Data Low DW Register
+#define		CBUS_ERR_DATA_H 	0x035C	//
+#define		USB_SIE_INTF_ADDR	0x0360	// USB SIE Access Interface Address Reg
+#define		USB_SIE_INTF_WD		0x0361	// USB SIE Access Interface WData Reg
+#define		USB_SIE_INTF_RD		0x0362	// USB SIE Access Interface RData Reg
+#define		USB_SIE_INTF_CTRL	0x0363	// USB SIE Access Interface Control Reg
+
+// Boundary is 0x37F
+
+//
+// 14. PCIE config register	(Offset 0x500-)
+//
+#define		TPPoll				0x0500	// Transmit Polling
+#define		PM_CTRL				0x0502	// PCIE power management control Register
+#define		PCIF				0x0503	// PCI Function Register 0x0009h~0x000bh
+
+#define		THPDA				0x0514	// Transmit High Priority Desc Addr
+#define		TMDA				0x0518	// Transmit Management Desc Addr
+#define		TCDA				0x051C	// Transmit Command Desc Addr
+#define		HDA				0x0520	// HCCA Desc Addr
+#define		TVODA				0x0524	// Transmit VO Desc Addr
+#define		TVIDA				0x0528	// Transmit VI Desc Addr
+#define		TBEDA				0x052C	// Transmit BE Desc Addr
+#define		TBKDA				0x0530	// Transmit BK Desc Addr
+#define		TBDA				0x0534	// Transmit Beacon Desc Addr
+#define		RCDA				0x0538	// Receive Command Desc Addr
+#define		RDSA				0x053C	// Receive Desc Starting Addr
+#define		DBI_WDATA			0x0540	// DBI write data Register
+#define		DBI_RDATA			0x0544	// DBI read data Register
+#define		DBI_CTRL			0x0548	// PCIE DBI control Register
+#define		MDIO_DATA			0x0550	// PCIE MDIO data Register
+#define		MDIO_CTRL			0x0554	// PCIE MDIO control Register
+#define		PCI_RPWM			0x0561	// PCIE RPWM register
+#define		PCI_CPWM				0x0563	// Current Power Mode.
+
+//
+// Config register   (Offset 0x800-)
+//
+#define 	PHY_CCA				0x803   // CCA related register
+
+//============================================================================
+//       8192S USB specific Regsiter Offset and Content definition,
+//       2008.08.28, added by Roger.
+//============================================================================
+// Rx Aggregation time-out reg.
+#define	USB_RX_AGG_TIMEOUT	0xFE5B
+
+// Firware reserved Tx page control.
+#define	FW_OFFLOAD_EN		BIT7
+
+// Min Spacing related settings.
+#define	MAX_MSS_DENSITY 			0x13
+#define	MAX_MSS_DENSITY_2T 		0x13
+#define	MAX_MSS_DENSITY_1T 		0x0A
+
+// Rx DMA Control related settings
+#define	RXDMA_AGG_EN		BIT7
+
+// USB Rx Aggregation TimeOut settings
+#define	RXDMA_AGG_TIMEOUT_DISABLE		0x00
+#define	RXDMA_AGG_TIMEOUT_17MS  			0x01
+#define	RXDMA_AGG_TIMEOUT_17_2_MS  		0x02
+#define	RXDMA_AGG_TIMEOUT_17_4_MS  		0x04
+#define	RXDMA_AGG_TIMEOUT_17_10_MS  		0x0A
+// USB RPWM register
+#define	USB_RPWM			0xFE58
+
+//FIXLZM SVN_BRACH NOT MOD HERE, IF MOD RX IS LITTLE LOW
+//#if ((HAL_CODE_BASE == RTL8192_S) &&  (DEV_BUS_TYPE==PCI_INTERFACE))
+//#define	RPWM		PCI_RPWM
+//#elif ((HAL_CODE_BASE == RTL8192_S) &&  (DEV_BUS_TYPE==USB_INTERFACE))
+//#define	RPWM		USB_RPWM
+//#endif
+
+
+//============================================================================
+//       8190 Regsiter offset definition
+//============================================================================
+#if 1	// Delete the register later
+#define		AFR					0x010	// AutoLoad Function Register
+#define		BCN_TCFG			0x062	// Beacon Time Configuration
+#define		RATR0				0x320	// Rate Adaptive Table register1
+#endif
+// TODO: Remove unused register, We must declare backward compatiable
+//Undefined register set in 8192S. 0x320/350 DW is useless
+#define		UnusedRegister		0x0320
+#define		PSR					UnusedRegister	// Page Select Register
+//Security Related
+#define		DCAM				UnusedRegister	// Debug CAM Interface
+//PHY Configuration related
+#define		BBAddr				UnusedRegister	// Phy register address register
+#define		PhyDataR			UnusedRegister	// Phy register data read
+#define		UFWP				UnusedRegister
+
+
+//============================================================================
+//       8192S Regsiter Bit and Content definition
+//============================================================================
+
+//
+// 1. System Configuration Registers	 (Offset: 0x0000 - 0x003F)
+//
+//----------------------------------------------------------------------------
+//       8192S SYS_ISO_CTRL bits					(Offset 0x0, 16bit)
+//----------------------------------------------------------------------------
+#define		ISO_MD2PP			BIT0	// MACTOP/BB/PCIe Digital to Power On.
+#define		ISO_PA2PCIE			BIT3	// PCIe Analog 1.2V to PCIe 3.3V
+#define		ISO_PLL2MD			BIT4	// AFE PLL to MACTOP/BB/PCIe Digital.
+#define		ISO_PWC_DV2RP		BIT11	// Digital Vdd to Retention Path
+#define		ISO_PWC_RV2RP		BIT12	// LPLDOR12 to Retenrion Path, 1: isolation, 0: attach.
+
+//----------------------------------------------------------------------------
+//       8192S SYS_FUNC_EN bits					(Offset 0x2, 16bit)
+//----------------------------------------------------------------------------
+#define		FEN_MREGEN			BIT15	// MAC I/O Registers Enable.
+#define		FEN_DCORE			BIT11	// Enable Core Digital.
+#define		FEN_CPUEN			BIT10	// Enable CPU Core Digital.
+//       8192S PMC_FSM bits					(Offset 0x4, 32bit)
+//----------------------------------------------------------------------------
+#define		PAD_HWPD_IDN		BIT22	// HWPDN PAD status Indicator
+
+//----------------------------------------------------------------------------
+
+//----------------------------------------------------------------------------
+//       8192S SYS_CLKR bits					(Offset 0x8, 16bit)
+//----------------------------------------------------------------------------
+#define		SYS_CLKSEL_80M		BIT0	// System Clock 80MHz
+#define		SYS_PS_CLKSEL		BIT1	 //System power save clock select.
+#define		SYS_CPU_CLKSEL		BIT2	// System Clock select, 1: AFE source, 0: System clock(L-Bus)
+#define		SYS_MAC_CLK_EN		BIT11	// MAC Clock Enable.
+#define		SYS_SWHW_SEL		BIT14	// Load done, control path seitch.
+#define		SYS_FWHW_SEL		BIT15	// Sleep exit, control path swith.
+
+
+//----------------------------------------------------------------------------
+//       8192S Cmd9346CR bits					(Offset 0xA, 16bit)
+//----------------------------------------------------------------------------
+#define		CmdEEPROM_En						BIT5	 // EEPROM enable when set 1
+#define		CmdEERPOMSEL						BIT4 // System EEPROM select, 0: boot from E-FUSE, 1: The EEPROM used is 9346
+#define		Cmd9346CR_9356SEL					BIT4
+#define		AutoLoadEEPROM						(CmdEEPROM_En|CmdEERPOMSEL)
+#define		AutoLoadEFUSE						CmdEEPROM_En
+
+
+//----------------------------------------------------------------------------
+//       8192S AFE_MISC bits		AFE Misc			(Offset 0x10, 8bits)
+//----------------------------------------------------------------------------
+#define		AFE_MBEN			BIT1	// Enable AFE Macro Block's Mbias.
+#define		AFE_BGEN			BIT0	// Enable AFE Macro Block's Bandgap.
+
+//----------------------------------------------------------------------------
+//       8192S SPS1_CTRL bits					(Offset 0x18-1E, 56bits)
+//----------------------------------------------------------------------------
+#define		SPS1_SWEN			BIT1	// Enable vsps18 SW Macro Block.
+#define		SPS1_LDEN			BIT0	// Enable VSPS12 LDO Macro block.
+
+//----------------------------------------------------------------------------
+//       8192S RF_CTRL bits					(Offset 0x1F, 8bits)
+//----------------------------------------------------------------------------
+#define		RF_EN				BIT0 // Enable RF module.
+#define		RF_RSTB			BIT1 // Reset RF module.
+#define		RF_SDMRSTB			BIT2 // Reset RF SDM module.
+
+//----------------------------------------------------------------------------
+//       8192S LDOA15_CTRL bits					(Offset 0x20, 8bits)
+//----------------------------------------------------------------------------
+#define		LDA15_EN			BIT0	// Enable LDOA15 Macro Block
+
+//----------------------------------------------------------------------------
+//       8192S LDOV12D_CTRL bits					(Offset 0x21, 8bits)
+//----------------------------------------------------------------------------
+#define		LDV12_EN			BIT0	// Enable LDOVD12 Macro Block
+#define		LDV12_SDBY			BIT1	// LDOVD12 standby mode
+
+//----------------------------------------------------------------------------
+//       8192S AFE_XTAL_CTRL bits	AFE Crystal Control.	(Offset 0x26,16bits)
+//----------------------------------------------------------------------------
+#define		XTAL_GATE_AFE		BIT10
+// Gated Control. 1: AFE Clock source gated, 0: Clock enable.
+
+//----------------------------------------------------------------------------
+//       8192S AFE_PLL_CTRL bits	System Function Enable	(Offset 0x28,64bits)
+//----------------------------------------------------------------------------
+#define		APLL_EN				BIT0	// Enable AFE PLL Macro Block.
+
+// Find which card bus type
+#define		AFR_CardBEn			BIT0
+#define		AFR_CLKRUN_SEL		BIT1
+#define		AFR_FuncRegEn		BIT2
+
+//
+// 2. Command Control Registers	 (Offset: 0x0040 - 0x004F)
+//
+//----------------------------------------------------------------------------
+//       8192S (CMD) command register bits		(Offset 0x40, 16 bits)
+//----------------------------------------------------------------------------
+#define		APSDOFF_STATUS		BIT15	//
+#define		APSDOFF				BIT14   //
+#define		BBRSTn				BIT13   //Enable OFDM/CCK
+#define		BB_GLB_RSTn			BIT12   //Enable BB
+#define		SCHEDULE_EN			BIT10   //Enable MAC scheduler
+#define		MACRXEN				BIT9    //
+#define		MACTXEN				BIT8    //
+#define		DDMA_EN				BIT7    //FW off load function enable
+#define		FW2HW_EN			BIT6    //MAC every module reset as below
+#define		RXDMA_EN			BIT5    //
+#define		TXDMA_EN			BIT4    //
+#define		HCI_RXDMA_EN		BIT3    //
+#define		HCI_TXDMA_EN		BIT2    //
+
+//----------------------------------------------------------------------------
+//       8192S (TXPAUSE) transmission pause		(Offset 0x42, 8 bits)
+//----------------------------------------------------------------------------
+#define		StopHCCA			BIT6
+#define		StopHigh			BIT5
+#define		StopMgt				BIT4
+#define		StopVO				BIT3
+#define		StopVI				BIT2
+#define		StopBE				BIT1
+#define		StopBK				BIT0
+
+//----------------------------------------------------------------------------
+//       8192S (LBKMD) LoopBack Mode Select 		(Offset 0x43, 8 bits)
+//----------------------------------------------------------------------------
+//
+//	[3] no buffer, 1: no delay, 0: delay; [2] dmalbk, [1] no_txphy, [0] diglbk.
+//	0000: Normal
+//	1011: MAC loopback (involving CPU)
+//	0011: MAC Delay Loopback
+//	0001: PHY loopback (not yet implemented)
+//	0111: DMA loopback (only uses TxPktBuffer and DMA engine)
+//	All other combinations are reserved.
+//	Default: 0000b.
+//
+#define		LBK_NORMAL		0x00
+#define		LBK_MAC_LB		(BIT0|BIT1|BIT3)
+#define		LBK_MAC_DLB		(BIT0|BIT1)
+#define		LBK_DMA_LB		(BIT0|BIT1|BIT2)
+
+//----------------------------------------------------------------------------
+//       8192S (TCR) transmission Configuration Register (Offset 0x44, 32 bits)
+//----------------------------------------------------------------------------
+#define		TCP_OFDL_EN				BIT25	//For CE packet conversion
+#define		HWPC_TX_EN				BIT24   //""
+#define		TXDMAPRE2FULL			BIT23   //TXDMA enable pre2full sync
+#define		DISCW					BIT20   //CW disable
+#define		TCRICV					BIT19   //Append ICV or not
+#define		CfendForm				BIT17   //AP mode
+#define		TCRCRC					BIT16   //Append CRC32
+#define		FAKE_IMEM_EN			BIT15   //
+#define		TSFRST					BIT9    //
+#define		TSFEN					BIT8    //
+// For TCR FW download ready --> write by FW  Bit0-7 must all one
+#define		FWALLRDY				(BIT0|BIT1|BIT2|BIT3|BIT4|BIT5|BIT6|BIT7)
+#define		FWRDY					BIT7
+#define		BASECHG					BIT6
+#define		IMEM					BIT5
+#define		DMEM_CODE_DONE			BIT4
+#define		EXT_IMEM_CHK_RPT		BIT3
+#define		EXT_IMEM_CODE_DONE		BIT2
+#define		IMEM_CHK_RPT			BIT1
+#define		IMEM_CODE_DONE			BIT0
+// Copy fomr 92SU definition
+#define		IMEM_CODE_DONE		BIT0
+#define		IMEM_CHK_RPT		BIT1
+#define		EMEM_CODE_DONE		BIT2
+#define		EMEM_CHK_RPT		BIT3
+#define		DMEM_CODE_DONE		BIT4
+#define		IMEM_RDY			BIT5
+#define		BASECHG			BIT6
+#define		FWRDY				BIT7
+#define		LOAD_FW_READY		(IMEM_CODE_DONE|IMEM_CHK_RPT|EMEM_CODE_DONE|\
+					EMEM_CHK_RPT|DMEM_CODE_DONE|IMEM_RDY|BASECHG|\
+					FWRDY)
+#define		TCR_TSFEN			BIT8		// TSF function on or off.
+#define		TCR_TSFRST			BIT9		// Reset TSF function to zero.
+#define		TCR_FAKE_IMEM_EN	BIT15
+#define		TCR_CRC				BIT16
+#define		TCR_ICV				BIT19	// Integrity Check Value.
+#define		TCR_DISCW			BIT20	// Disable Contention Windows Backoff.
+#define		TCR_HWPC_TX_EN	BIT24
+#define		TCR_TCP_OFDL_EN	BIT25
+#define		TXDMA_INIT_VALUE	(IMEM_CHK_RPT|EXT_IMEM_CHK_RPT)
+//----------------------------------------------------------------------------
+//       8192S (RCR) Receive Configuration Register	(Offset 0x48, 32 bits)
+//----------------------------------------------------------------------------
+#define		RCR_APPFCS				BIT31		//WMAC append FCS after pauload
+#define		RCR_DIS_ENC_2BYTE		BIT30       //HW encrypt 2 or 1 byte mode
+#define		RCR_DIS_AES_2BYTE		BIT29       //
+#define		RCR_HTC_LOC_CTRL		BIT28       //MFC<--HTC=1 MFC-->HTC=0
+#define		RCR_ENMBID				BIT27		//Enable Multiple BssId.
+#define		RCR_RX_TCPOFDL_EN		BIT26		//
+#define		RCR_APP_PHYST_RXFF	BIT25       //
+#define		RCR_APP_PHYST_STAFF	BIT24       //
+#define		RCR_CBSSID				BIT23		//Accept BSSID match packet
+#define		RCR_APWRMGT			BIT22		//Accept power management packet
+#define		RCR_ADD3				BIT21		//Accept address 3 match packet
+#define		RCR_AMF				BIT20		//Accept management type frame
+#define		RCR_ACF					BIT19		//Accept control type frame
+#define		RCR_ADF					BIT18		//Accept data type frame
+#define		RCR_APP_MIC			BIT17		//
+#define		RCR_APP_ICV			BIT16       //
+#define		RCR_RXFTH				BIT13		//Rx FIFO Threshold Bot 13 - 15
+#define		RCR_AICV				BIT12		//Accept ICV error packet
+#define		RCR_RXDESC_LK_EN		BIT11		//Accept to update rx desc length
+#define		RCR_APP_BA_SSN			BIT6		//Accept BA SSN
+#define		RCR_ACRC32				BIT5		//Accept CRC32 error packet
+#define		RCR_RXSHFT_EN			BIT4		//Accept broadcast packet
+#define		RCR_AB					BIT3		//Accept broadcast packet
+#define		RCR_AM					BIT2		//Accept multicast packet
+#define		RCR_APM				BIT1		//Accept physical match packet
+#define		RCR_AAP					BIT0		//Accept all unicast packet
+#define		RCR_MXDMA_OFFSET		8
+#define		RCR_FIFO_OFFSET		13
+
+//in 92U FIXLZM
+//#ifdef RTL8192U
+#define RCR_ONLYERLPKT		BIT31			// Early Receiving based on Packet Size.
+#define RCR_ENCS2			BIT30			// Enable Carrier Sense Detection Method 2
+#define RCR_ENCS1			BIT29			// Enable Carrier Sense Detection Method 1
+#define RCR_ACKTXBW			(BIT24|BIT25)		// TXBW Setting of ACK frames
+//#endif
+//----------------------------------------------------------------------------
+//       8192S (MSR) Media Status Register	(Offset 0x4C, 8 bits)
+//----------------------------------------------------------------------------
+/*
+Network Type
+00: No link
+01: Link in ad hoc network
+10: Link in infrastructure network
+11: AP mode
+Default: 00b.
+*/
+#define		MSR_NOLINK				0x00
+#define		MSR_ADHOC				0x01
+#define		MSR_INFRA				0x02
+#define		MSR_AP					0x03
+
+//----------------------------------------------------------------------------
+//       8192S (SYSF_CFG) system Fucntion Config Reg	(Offset 0x4D, 8 bits)
+//----------------------------------------------------------------------------
+#define		ENUART					BIT7
+#define		ENJTAG					BIT3
+#define		BTMODE					(BIT2|BIT1)
+#define		ENBT					BIT0
+
+//----------------------------------------------------------------------------
+//       8192S (MBIDCTRL) MBSSID Control Register	(Offset 0x4F, 8 bits)
+//----------------------------------------------------------------------------
+#define		ENMBID					BIT7
+#define		BCNUM					(BIT6|BIT5|BIT4)
+
+//
+// 3. MACID Setting Registers	(Offset: 0x0050 - 0x007F)
+//
+
+//
+// 4. Timing Control Registers	(Offset: 0x0080 - 0x009F)
+//
+//----------------------------------------------------------------------------
+//       8192S (USTIME) US Time Tunning Register	(Offset 0x8A, 16 bits)
+//----------------------------------------------------------------------------
+#define		USTIME_EDCA				0xFF00
+#define		USTIME_TSF				0x00FF
+
+//----------------------------------------------------------------------------
+//       8192S (SIFS_CCK/OFDM) US Time Tunning Register	(Offset 0x8C/8E,16 bits)
+//----------------------------------------------------------------------------
+#define		SIFS_TRX				0xFF00
+#define		SIFS_CTX				0x00FF
+
+//----------------------------------------------------------------------------
+//       8192S (DRVERLYINT)	Driver Early Interrupt Reg		(Offset 0x98, 16bit)
+//----------------------------------------------------------------------------
+#define		ENSWBCN					BIT15
+#define		DRVERLY_TU				0x0FF0
+#define		DRVERLY_US				0x000F
+#define		BCN_TCFG_CW_SHIFT		8
+#define		BCN_TCFG_IFS			0
+
+//
+// 5. FIFO Control Registers	 (Offset: 0x00A0 - 0x015F)
+//
+
+//
+// 6. Adaptive Control Registers  (Offset: 0x0160 - 0x01CF)
+//
+//----------------------------------------------------------------------------
+//       8192S Response Rate Set Register	(offset 0x181, 24bits)
+//----------------------------------------------------------------------------
+#define		RRSR_RSC_OFFSET			21
+#define		RRSR_SHORT_OFFSET		23
+#define		RRSR_RSC_BW_40M		0x600000
+#define		RRSR_RSC_UPSUBCHNL		0x400000
+#define		RRSR_RSC_LOWSUBCHNL		0x200000
+#define		RRSR_SHORT				0x800000
+#define		RRSR_1M					BIT0
+#define		RRSR_2M					BIT1
+#define		RRSR_5_5M				BIT2
+#define		RRSR_11M				BIT3
+#define		RRSR_6M					BIT4
+#define		RRSR_9M					BIT5
+#define		RRSR_12M				BIT6
+#define		RRSR_18M				BIT7
+#define		RRSR_24M				BIT8
+#define		RRSR_36M				BIT9
+#define		RRSR_48M				BIT10
+#define		RRSR_54M				BIT11
+#define		RRSR_MCS0				BIT12
+#define		RRSR_MCS1				BIT13
+#define		RRSR_MCS2				BIT14
+#define		RRSR_MCS3				BIT15
+#define		RRSR_MCS4				BIT16
+#define		RRSR_MCS5				BIT17
+#define		RRSR_MCS6				BIT18
+#define		RRSR_MCS7				BIT19
+#define		BRSR_AckShortPmb		BIT23
+
+#define 		RRSR_RSC_UPSUBCHANL	0x200000
+// CCK ACK: use Short Preamble or not
+
+//----------------------------------------------------------------------------
+//       8192S Rate Definition
+//----------------------------------------------------------------------------
+//CCK
+#define		RATR_1M					0x00000001
+#define		RATR_2M					0x00000002
+#define		RATR_55M				0x00000004
+#define		RATR_11M				0x00000008
+//OFDM
+#define		RATR_6M					0x00000010
+#define		RATR_9M					0x00000020
+#define		RATR_12M				0x00000040
+#define		RATR_18M				0x00000080
+#define		RATR_24M				0x00000100
+#define		RATR_36M				0x00000200
+#define		RATR_48M				0x00000400
+#define		RATR_54M				0x00000800
+//MCS 1 Spatial Stream
+#define		RATR_MCS0				0x00001000
+#define		RATR_MCS1				0x00002000
+#define		RATR_MCS2				0x00004000
+#define		RATR_MCS3				0x00008000
+#define		RATR_MCS4				0x00010000
+#define		RATR_MCS5				0x00020000
+#define		RATR_MCS6				0x00040000
+#define		RATR_MCS7				0x00080000
+//MCS 2 Spatial Stream
+#define		RATR_MCS8				0x00100000
+#define		RATR_MCS9				0x00200000
+#define		RATR_MCS10				0x00400000
+#define		RATR_MCS11				0x00800000
+#define		RATR_MCS12				0x01000000
+#define		RATR_MCS13				0x02000000
+#define		RATR_MCS14				0x04000000
+#define		RATR_MCS15				0x08000000
+// ALL CCK Rate
+#define	RATE_ALL_CCK				RATR_1M|RATR_2M|RATR_55M|RATR_11M
+#define	RATE_ALL_OFDM_AG			RATR_6M|RATR_9M|RATR_12M|RATR_18M|RATR_24M|\
+									RATR_36M|RATR_48M|RATR_54M
+#define	RATE_ALL_OFDM_1SS			RATR_MCS0|RATR_MCS1|RATR_MCS2|RATR_MCS3 |\
+									RATR_MCS4|RATR_MCS5|RATR_MCS6	|RATR_MCS7
+#define	RATE_ALL_OFDM_2SS			RATR_MCS8|RATR_MCS9	|RATR_MCS10|RATR_MCS11|\
+									RATR_MCS12|RATR_MCS13|RATR_MCS14|RATR_MCS15
+
+//
+// 7. EDCA Setting Registers	 (Offset: 0x01D0 - 0x01FF)
+//
+//----------------------------------------------------------------------------
+//       8192S EDCA Setting 	(offset 0x1D0-1DF, 4DW VO/VI/BE/BK)
+//----------------------------------------------------------------------------
+#define		AC_PARAM_TXOP_LIMIT_OFFSET		16
+#define		AC_PARAM_ECW_MAX_OFFSET			12
+#define		AC_PARAM_ECW_MIN_OFFSET			8
+#define		AC_PARAM_AIFS_OFFSET			0
+
+//----------------------------------------------------------------------------
+//       8192S AcmHwCtrl bits 					(offset 0x1E7, 1 byte)
+//----------------------------------------------------------------------------
+#define		AcmHw_HwEn				BIT0
+#define		AcmHw_BeqEn				BIT1
+#define		AcmHw_ViqEn				BIT2
+#define		AcmHw_VoqEn				BIT3
+#define		AcmHw_BeqStatus			BIT4
+#define		AcmHw_ViqStatus			BIT5
+#define		AcmHw_VoqStatus			BIT6
+
+//----------------------------------------------------------------------------
+//       8192S Retry Limit					(Offset 0x1F4, 16bit)
+//----------------------------------------------------------------------------
+#define		RETRY_LIMIT_SHORT_SHIFT	8
+#define		RETRY_LIMIT_LONG_SHIFT	0
+
+//
+// 8. WMAC, BA and CCX related Register.	 (Offset: 0x0200 - 0x023F)
+//
+//----------------------------------------------------------------------------
+//       8192S NAV_CTRL bits					(Offset 0x200, 24bit)
+//----------------------------------------------------------------------------
+#define		NAV_UPPER_EN			BIT16
+#define		NAV_UPPER				0xFF00
+#define		NAV_RTSRST				0xFF
+//----------------------------------------------------------------------------
+//       8192S BW_OPMODE bits					(Offset 0x203, 8bit)
+//----------------------------------------------------------------------------
+#define		BW_OPMODE_20MHZ			BIT2
+#define		BW_OPMODE_5G			BIT1
+#define		BW_OPMODE_11J			BIT0
+//----------------------------------------------------------------------------
+//       8192S BW_OPMODE bits					(Offset 0x230, 4 Byte)
+//----------------------------------------------------------------------------
+#define		RXERR_RPT_RST			BIT27 // Write "one" to set the counter to zero.
+// RXERR_RPT_SEL
+#define		RXERR_OFDM_PPDU			0
+#define		RXERR_OFDM_FALSE_ALARM	1
+#define		RXERR_OFDM_MPDU_OK		2
+#define		RXERR_OFDM_MPDU_FAIL	3
+#define		RXERR_CCK_PPDU			4
+#define		RXERR_CCK_FALSE_ALARM	5
+#define		RXERR_CCK_MPDU_OK		6
+#define		RXERR_CCK_MPDU_FAIL		7
+#define		RXERR_HT_PPDU			8
+#define		RXERR_HT_FALSE_ALARM	9
+#define		RXERR_HT_MPDU_TOTAL		10
+#define		RXERR_HT_MPDU_OK		11
+#define		RXERR_HT_MPDU_FAIL		12
+#define		RXERR_RX_FULL_DROP		15
+
+//
+// 9. Security Control Registers	(Offset: 0x0240 - 0x025F)
+//
+//----------------------------------------------------------------------------
+//       8192S RWCAM CAM Command Register     		(offset 0x240, 4 byte)
+//----------------------------------------------------------------------------
+#define		CAM_CM_SecCAMPolling	BIT31		//Security CAM Polling
+#define		CAM_CM_SecCAMClr		BIT30		//Clear all bits in CAM
+#define		CAM_CM_SecCAMWE			BIT16		//Security CAM enable
+#define		CAM_ADDR				0xFF		//CAM Address Offset
+
+//----------------------------------------------------------------------------
+//       8192S CAMDBG Debug CAM Register	 			(offset 0x24C, 4 byte)
+//----------------------------------------------------------------------------
+#define		Dbg_CAM_TXSecCAMInfo	BIT31		//Retrieve lastest Tx Info
+#define		Dbg_CAM_SecKeyFound		BIT30		//Security KEY Found
+
+
+//----------------------------------------------------------------------------
+//       8192S SECR Security Configuration Register	(offset 0x250, 1 byte)
+//----------------------------------------------------------------------------
+#define		SCR_TxUseDK				BIT0			//Force Tx Use Default Key
+#define		SCR_RxUseDK				BIT1			//Force Rx Use Default Key
+#define		SCR_TxEncEnable			BIT2			//Enable Tx Encryption
+#define		SCR_RxDecEnable			BIT3			//Enable Rx Decryption
+#define		SCR_SKByA2				BIT4			//Search kEY BY A2
+#define		SCR_NoSKMC				BIT5			//No Key Search Multicast
+//----------------------------------------------------------------------------
+//       8192S CAM Config Setting (offset 0x250, 1 byte)
+//----------------------------------------------------------------------------
+#define		CAM_VALID				BIT15
+#define		CAM_NOTVALID			0x0000
+#define		CAM_USEDK				BIT5
+
+#define		CAM_NONE				0x0
+#define		CAM_WEP40				0x01
+#define		CAM_TKIP				0x02
+#define		CAM_AES					0x04
+#define		CAM_WEP104				0x05
+
+#define		TOTAL_CAM_ENTRY			32
+
+#define		CAM_CONFIG_USEDK		TRUE
+#define		CAM_CONFIG_NO_USEDK		FALSE
+
+#define		CAM_WRITE				BIT16
+#define		CAM_READ				0x00000000
+#define		CAM_POLLINIG			BIT31
+
+#define		SCR_UseDK				0x01
+#define		SCR_TxSecEnable		0x02
+#define		SCR_RxSecEnable		0x04
+
+//
+// 10. Power Save Control Registers	 (Offset: 0x0260 - 0x02DF)
+//
+#define		WOW_PMEN				BIT0 // Power management Enable.
+#define		WOW_WOMEN			BIT1 // WoW function on or off.
+#define		WOW_MAGIC				BIT2 // Magic packet
+#define		WOW_UWF				BIT3 // Unicast Wakeup frame.
+
+//
+// 11. General Purpose Registers	(Offset: 0x02E0 - 0x02FF)
+//       8192S GPIO Config Setting (offset 0x2F1, 1 byte)
+//----------------------------------------------------------------------------
+#define		GPIOMUX_EN			BIT3 // When this bit is set to "1", GPIO PINs will switch to MAC GPIO Function
+#define		GPIOSEL_GPIO		0	// UART or JTAG or pure GPIO
+#define		GPIOSEL_PHYDBG		1	// PHYDBG
+#define		GPIOSEL_BT			2	// BT_coex
+#define		GPIOSEL_WLANDBG		3	// WLANDBG
+#define		GPIOSEL_GPIO_MASK	~(BIT0|BIT1)
+
+//----------------------------------------------------------------------------
+
+//----------------------------------------------------------------------------
+// PHY REG Access Report Register definition
+//----------------------------------------------------------------------------
+#define		HST_RDBUSY				BIT0
+#define		CPU_WTBUSY			BIT1
+
+//
+// 12. Host Interrupt Status Registers	 (Offset: 0x0300 - 0x030F)
+//
+//----------------------------------------------------------------------------
+//       8190 IMR/ISR bits						(offset 0xfd,  8bits)
+//----------------------------------------------------------------------------
+#define		IMR8190_DISABLED	0x0
+
+// IMR DW1 Bit 0-31
+#define		IMR_CPUERR			BIT5		// CPU error interrupt
+#define		IMR_ATIMEND			BIT4		// ATIM Window End Interrupt
+#define		IMR_TBDOK			BIT3		// Transmit Beacon OK Interrupt
+#define		IMR_TBDER			BIT2		// Transmit Beacon Error Interrupt
+#define		IMR_BCNDMAINT8		BIT1		// Beacon DMA Interrupt 8
+#define		IMR_BCNDMAINT7		BIT0		// Beacon DMA Interrupt 7
+// IMR DW0 Bit 0-31
+
+#define		IMR_BCNDMAINT6		BIT31		// Beacon DMA Interrupt 6
+#define		IMR_BCNDMAINT5		BIT30		// Beacon DMA Interrupt 5
+#define		IMR_BCNDMAINT4		BIT29		// Beacon DMA Interrupt 4
+#define		IMR_BCNDMAINT3		BIT28		// Beacon DMA Interrupt 3
+#define		IMR_BCNDMAINT2		BIT27		// Beacon DMA Interrupt 2
+#define		IMR_BCNDMAINT1		BIT26		// Beacon DMA Interrupt 1
+#define		IMR_BCNDOK8			BIT25		// Beacon Queue DMA OK Interrup 8
+#define		IMR_BCNDOK7			BIT24		// Beacon Queue DMA OK Interrup 7
+#define		IMR_BCNDOK6			BIT23		// Beacon Queue DMA OK Interrup 6
+#define		IMR_BCNDOK5			BIT22		// Beacon Queue DMA OK Interrup 5
+#define		IMR_BCNDOK4			BIT21		// Beacon Queue DMA OK Interrup 4
+#define		IMR_BCNDOK3			BIT20		// Beacon Queue DMA OK Interrup 3
+#define		IMR_BCNDOK2			BIT19		// Beacon Queue DMA OK Interrup 2
+#define		IMR_BCNDOK1			BIT18		// Beacon Queue DMA OK Interrup 1
+#define		IMR_TIMEOUT2		BIT17		// Timeout interrupt 2
+#define		IMR_TIMEOUT1		BIT16		// Timeout interrupt 1
+#define		IMR_TXFOVW			BIT15		// Transmit FIFO Overflow
+#define		IMR_PSTIMEOUT		BIT14		// Power save time out interrupt
+#define		IMR_BcnInt			BIT13		// Beacon DMA Interrupt 0
+#define		IMR_RXFOVW			BIT12		// Receive FIFO Overflow
+#define		IMR_RDU				BIT11		// Receive Descriptor Unavailable
+#define		IMR_RXCMDOK			BIT10		// Receive Command Packet OK
+#define		IMR_BDOK			BIT9		// Beacon Queue DMA OK Interrup
+#define		IMR_HIGHDOK			BIT8		// High Queue DMA OK Interrupt
+#define		IMR_COMDOK			BIT7		// Command Queue DMA OK Interrupt
+#define		IMR_MGNTDOK			BIT6		// Management Queue DMA OK Interrupt
+#define		IMR_HCCADOK			BIT5		// HCCA Queue DMA OK Interrupt
+#define		IMR_BKDOK			BIT4		// AC_BK DMA OK Interrupt
+#define		IMR_BEDOK			BIT3		// AC_BE DMA OK Interrupt
+#define		IMR_VIDOK			BIT2		// AC_VI DMA OK Interrupt
+#define		IMR_VODOK			BIT1		// AC_VO DMA Interrupt
+#define		IMR_ROK				BIT0		// Receive DMA OK Interrupt
+
+//
+// 13. Test Mode and Debug Control Registers	(Offset: 0x0310 - 0x034F)
+//
+
+//
+// 14. PCIE config register	(Offset 0x500-)
+//
+//----------------------------------------------------------------------------
+//       8190 TPPool bits 					(offset 0xd9, 2 byte)
+//----------------------------------------------------------------------------
+#define		TPPoll_BKQ			BIT0			// BK queue polling
+#define		TPPoll_BEQ			BIT1			// BE queue polling
+#define		TPPoll_VIQ			BIT2			// VI queue polling
+#define		TPPoll_VOQ			BIT3			// VO queue polling
+#define		TPPoll_BQ			BIT4			// Beacon queue polling
+#define		TPPoll_CQ			BIT5			// Command queue polling
+#define		TPPoll_MQ			BIT6			// Management queue polling
+#define		TPPoll_HQ			BIT7			// High queue polling
+#define		TPPoll_HCCAQ		BIT8			// HCCA queue polling
+#define		TPPoll_StopBK		BIT9			// Stop BK queue
+#define		TPPoll_StopBE		BIT10			// Stop BE queue
+#define		TPPoll_StopVI		BIT11			// Stop VI queue
+#define		TPPoll_StopVO		BIT12			// Stop VO queue
+#define		TPPoll_StopMgt		BIT13			// Stop Mgnt queue
+#define		TPPoll_StopHigh		BIT14			// Stop High queue
+#define		TPPoll_StopHCCA		BIT15			// Stop HCCA queue
+#define		TPPoll_SHIFT		8				// Queue ID mapping
+
+//----------------------------------------------------------------------------
+//       8192S PCIF 							(Offset 0x500, 32bit)
+//----------------------------------------------------------------------------
+#define		MXDMA2_16bytes		0x000
+#define		MXDMA2_32bytes		0x001
+#define		MXDMA2_64bytes		0x010
+#define		MXDMA2_128bytes		0x011
+#define		MXDMA2_256bytes		0x100
+#define		MXDMA2_512bytes		0x101
+#define		MXDMA2_1024bytes	0x110
+#define		MXDMA2_NoLimit		0x7
+
+#define		MULRW_SHIFT			3
+#define		MXDMA2_RX_SHIFT		4
+#define		MXDMA2_TX_SHIFT		0
+
+//----------------------------------------------------------------------------
+//       8190 CCX_COMMAND_REG Setting (offset 0x25A, 1 byte)
+//----------------------------------------------------------------------------
+#define		CCX_CMD_CLM_ENABLE				BIT0	// Enable Channel Load
+#define		CCX_CMD_NHM_ENABLE				BIT1	// Enable Noise Histogram
+#define		CCX_CMD_FUNCTION_ENABLE			BIT8
+// CCX function (Channel Load/RPI/Noise Histogram).
+#define		CCX_CMD_IGNORE_CCA				BIT9
+// Treat CCA period as IDLE time for NHM.
+#define		CCX_CMD_IGNORE_TXON				BIT10
+// Treat TXON period as IDLE time for NHM.
+#define		CCX_CLM_RESULT_READY			BIT16
+// 1: Indicate the result of Channel Load is ready.
+#define		CCX_NHM_RESULT_READY			BIT16
+// 1: Indicate the result of Noise histogram is ready.
+#define		CCX_CMD_RESET					0x0
+// Clear all the result of CCX measurement and disable the CCX function.
+
+
+//----------------------------------------------------------------------------
+// 8192S EFUSE
+//----------------------------------------------------------------------------
+//#define		HWSET_MAX_SIZE_92S				128
+
+
+//----------------------------------------------------------------------------
+//       8192S EEPROM/EFUSE share register definition.
+//----------------------------------------------------------------------------
+
+#ifdef RTL8192SE
+//
+// 2008/11/05 MH Redefine EEPROM address for 8192SE
+// 92SE/SU EEPROM definition seems not the same!!!!!!
+// EEPROM MAP REgister Definition!!!! Please refer to 8192SE EEPROM V0.5 2008/10/21
+// Update to 8192SE EEPROM V0.6 2008/11/11
+//
+#define 		RTL8190_EEPROM_ID				0x8129	// 0-1
+#define 		EEPROM_HPON					0x02 // LDO settings.2-5
+#define 		EEPROM_CLK						0x06 // Clock settings.6-7
+#define 		EEPROM_TESTR					0x08 // SE Test mode.8
+
+#define 		EEPROM_VID						0x0A // SE Vendor ID.A-B
+#define 		EEPROM_DID						0x0C // SE Device ID. C-D
+#define 		EEPROM_SVID					0x0E // SE Vendor ID.E-F
+#define 		EEPROM_SMID					0x10 // SE PCI Subsystem ID. 10-11
+
+#define 		EEPROM_MAC_ADDR				0x12 // SEMAC Address. 12-17
+#define 		EEPROM_NODE_ADDRESS_BYTE_0	0x12 // MAC address.
+
+#define 		EEPROM_PwDiff					0x54 // Difference of gain index between legacy and high throughput OFDM.
+
+//
+// 0x20 - 4B EPHY parameter!!!
+//
+//
+#define 		EEPROM_TxPowerBase			0x50 // Tx Power of serving station.
+#define 		EEPROM_TxPwIndex_CCK_24G	0x5D // 0x50~0x5D Range = 0~0x24//FIXLZM
+#define 		EEPROM_TxPwIndex_OFDM_24G	0x6B // 0x5E~0x6B Range = 0~0x24//FIXLZM
+#define		EEPROM_TX_PWR_INDEX_RANGE	28		// CCK and OFDM 14 channel
+
+
+// 2009/01/21 MH Add for SD3 requirement
+#define 		EEPROM_TX_PWR_HT20_DIFF		0x62// HT20 Tx Power Index Difference
+#define 		DEFAULT_HT20_TXPWR_DIFF		2	// HT20<->40 default Tx Power Index Difference
+#define 		EEPROM_TX_PWR_OFDM_DIFF		0x65// OFDM Tx Power Index Difference
+#define 		EEPROM_TX_PWR_BAND_EDGE	0x67// TX Power offset at band-edge channel
+#define 		TX_PWR_BAND_EDGE_CHK		0x6D// Check if band-edge scheme is enabled
+
+// Oly old EEPROM format support the definition=============================
+//
+#define 		EEPROM_TxPwIndex_CCK_24G	0x5D // 0x50~0x5D Range = 0~0x24
+#define 		EEPROM_TxPwIndex_OFDM_24G	0x6B // 0x5E~0x6B Range = 0~0x24
+#define 		EEPROM_HT2T_CH1_A			0x6c //HT 2T path A channel 1 Power Index.
+#define 		EEPROM_HT2T_CH7_A			0x6d //HT 2T path A channel 7 Power Index.
+#define 		EEPROM_HT2T_CH13_A			0x6e //HT 2T path A channel 13 Power Index.
+#define 		EEPROM_HT2T_CH1_B			0x6f //HT 2T path B channel 1 Power Index.
+#define 		EEPROM_HT2T_CH7_B			0x70 //HT 2T path B channel 7 Power Index.
+#define 		EEPROM_HT2T_CH13_B			0x71 //HT 2T path B channel 13 Power Index.
+//
+#define 		EEPROM_TSSI_A					0x74 //TSSI value of path A.
+#define 		EEPROM_TSSI_B					0x75 //TSSI value of path B.
+//
+#define		EEPROM_RFInd_PowerDiff				0x76
+#define		EEPROM_Default_LegacyHTTxPowerDiff	0x3
+//
+#define 		EEPROM_ThermalMeter			0x77 // Thermal meter default value.
+#define 		EEPROM_CrystalCap				0x79 // Crystal Cap.
+#define 		EEPROM_ChannelPlan				0x7B // Map of supported channels.
+#define 		EEPROM_Version					0x7C // The EEPROM content version
+#define		EEPROM_CustomID				0x7A
+#define 		EEPROM_BoardType				0x7E
+// 0: 2x2 Green RTL8192GE miniCard (QFN68)
+// 1: 1x2            RTL8191SE miniCard (QFN64)
+// 2: 2x2            RTL8192SE miniCard (QFN68)
+// 3: 1x2            RTL8191SR minicCard(QFN64)
+
+//
+// Default Value for EEPROM or EFUSE!!!
+//
+#define		EEPROM_Default_TSSI			0x0
+#define 		EEPROM_Default_TxPowerDiff		0x0
+#define 		EEPROM_Default_CrystalCap		0x5
+#define 		EEPROM_Default_BoardType		0x02 // Default: 2X2, RTL8192SE(QFPN68)
+#define 		EEPROM_Default_TxPower		0x1010
+#define		EEPROM_Default_HT2T_TxPwr		0x10
+
+#ifdef EEPROM_OLD_FORMAT_SUPPORT
+#define 		EEPROM_Default_TxPowerBase	0x0
+#define 		EEPROM_Default_ThermalMeter	0x12
+#define 		EEPROM_Default_PwDiff			0x4
+#else
+#define		EEPROM_Default_LegacyHTTxPowerDiff	0x3
+#define		EEPROM_Default_ThermalMeter		0x12
+#define		EEPROM_Default_AntTxPowerDiff		0x0
+#define		EEPROM_Default_TxPwDiff_CrystalCap	0x5
+#define		EEPROM_Default_TxPowerLevel		0x22
+#endif
+
+#define		EEPROM_CHANNEL_PLAN_FCC				0x0
+#define		EEPROM_CHANNEL_PLAN_IC				0x1
+#define		EEPROM_CHANNEL_PLAN_ETSI			0x2
+#define		EEPROM_CHANNEL_PLAN_SPAIN			0x3
+#define		EEPROM_CHANNEL_PLAN_FRANCE			0x4
+#define		EEPROM_CHANNEL_PLAN_MKK				0x5
+#define		EEPROM_CHANNEL_PLAN_MKK1			0x6
+#define		EEPROM_CHANNEL_PLAN_ISRAEL			0x7
+#define		EEPROM_CHANNEL_PLAN_TELEC			0x8
+#define		EEPROM_CHANNEL_PLAN_GLOBAL_DOMAIN	0x9
+#define		EEPROM_CHANNEL_PLAN_WORLD_WIDE_13	0xA
+#define		EEPROM_CHANNEL_PLAN_BY_HW_MASK	0x80
+
+
+#define 		EEPROM_CID_DEFAULT					0x0
+#define 		EEPROM_CID_TOSHIBA			0x4
+#else
+//----------------------------------------------------------------------------
+//       8192S EEROM and Compatible E-Fuse definition. Added by Roger, 2008.10.21.
+//----------------------------------------------------------------------------
+#define 		RTL8190_EEPROM_ID				0x8129
+#define 		EEPROM_HPON					0x02 // LDO settings.
+#define 		EEPROM_VID						0x08 // USB Vendor ID.
+#define 		EEPROM_PID						0x0A // USB Product ID.
+#define 		EEPROM_USB_OPTIONAL			0x0C // For optional function.
+#define 		EEPROM_USB_PHY_PARA1			0x0D // For fine tune USB PHY.
+#define 		EEPROM_NODE_ADDRESS_BYTE_0	0x12 // MAC address.
+#define 		EEPROM_TxPowerDiff				0x1F
+
+#define 		EEPROM_Version					0x50
+#define 		EEPROM_ChannelPlan				0x51 // Map of supported channels.
+#define		EEPROM_CustomID				0x52
+#define 		EEPROM_SubCustomID			0x53 // Reserved  for customer use.
+
+
+	// <Roger_Notes> The followin are for different version of EEPROM contents purpose. 2008.11.22.
+#ifdef EEPROM_OLD_FORMAT_SUPPORT
+#define 		EEPROM_PwDiff					0x54 // Difference of gain index between legacy and high throughput OFDM.
+#define 		EEPROM_ThermalMeter			0x55 // Thermal meter default value.
+#define 		EEPROM_Reserved				0x56 // Reserved.
+#define 		EEPROM_CrystalCap				0x57 // Crystal Cap.
+#define 		EEPROM_TxPowerBase			0x58 // Tx Power of serving station.
+#define 		EEPROM_TxPwIndex_CCK_24G	0x59 // 0x59~0x66
+#define 		EEPROM_TxPwIndex_OFDM_24G	0x67 // 0x67~0x74
+#define 		EEPROM_TSSI_A					0x75 //TSSI value of path A.
+#define 		EEPROM_TSSI_B					0x76 //TSSI value of path B.
+#define 		EEPROM_TxPwTkMode			0x77 //Tx Power tracking mode.
+#define 		EEPROM_HT2T_CH1_A			0x78 //HT 2T path A channel 1 Power Index.
+#define 		EEPROM_HT2T_CH7_A			0x79 //HT 2T path A channel 7 Power Index.
+#define 		EEPROM_HT2T_CH13_A			0x7a //HT 2T path A channel 13 Power Index.
+#define 		EEPROM_HT2T_CH1_B			0x7b //HT 2T path B channel 1 Power Index.
+#define 		EEPROM_HT2T_CH7_B			0x7c //HT 2T path B channel 7 Power Index.
+#define 		EEPROM_HT2T_CH13_B			0x7d //HT 2T path B channel 13 Power Index.
+#define 		EEPROM_BoardType				0x7e //0x0: RTL8188SU, 0x1: RTL8191SU, 0x2: RTL8192SU, 0x3: RTL8191GU
+#else
+#define 		EEPROM_BoardType				0x54 //0x0: RTL8188SU, 0x1: RTL8191SU, 0x2: RTL8192SU, 0x3: RTL8191GU
+#define		EEPROM_TxPwIndex				0x55 //0x55-0x66, Tx Power index.
+#define 		EEPROM_PwDiff					0x67 // Difference of gain index between legacy and high throughput OFDM.
+#define 		EEPROM_ThermalMeter			0x68 // Thermal meter default value.
+#define 		EEPROM_CrystalCap				0x69 // Crystal Cap.
+#define 		EEPROM_TxPowerBase			0x6a // Tx Power of serving station.
+#define 		EEPROM_TSSI_A					0x6b //TSSI value of path A.
+#define 		EEPROM_TSSI_B					0x6c //TSSI value of path B.
+#define 		EEPROM_TxPwTkMode			0x6d //Tx Power tracking mode.
+//#define 		EEPROM_Reserved				0x6e //0x6e-0x7f, reserved.
+
+// 2009/02/09 Cosa Add for SD3 requirement
+#define 		EEPROM_TX_PWR_HT20_DIFF		0x6e// HT20 Tx Power Index Difference
+#define 		DEFAULT_HT20_TXPWR_DIFF		2	// HT20<->40 default Tx Power Index Difference
+#define 		EEPROM_TX_PWR_OFDM_DIFF		0x71// OFDM Tx Power Index Difference
+#define 		EEPROM_TX_PWR_BAND_EDGE	0x73// TX Power offset at band-edge channel
+#define 		TX_PWR_BAND_EDGE_CHK		0x79// Check if band-edge scheme is enabled
+#endif
+#define		EEPROM_Default_LegacyHTTxPowerDiff	0x3
+#define		EEPROM_USB_Default_OPTIONAL_FUNC	0x8
+#define		EEPROM_USB_Default_PHY_PARAM		0x0
+#define		EEPROM_Default_TSSI			0x0
+#define		EEPROM_Default_TxPwrTkMode	0x0
+#define 		EEPROM_Default_TxPowerDiff		0x0
+#define 		EEPROM_Default_TxPowerBase	0x0
+#define 		EEPROM_Default_ThermalMeter	0x7
+#define 		EEPROM_Default_PwDiff			0x4
+#define 		EEPROM_Default_CrystalCap		0x5
+#define 		EEPROM_Default_TxPower		0x1010
+#define 		EEPROM_Default_BoardType		0x02 // Default: 2X2, RTL8192SU(QFPN68)
+#define		EEPROM_Default_HT2T_TxPwr		0x10
+#define		EEPROM_USB_SN					BIT0
+#define		EEPROM_USB_REMOTE_WAKEUP	BIT1
+#define		EEPROM_USB_DEVICE_PWR		BIT2
+#define		EEPROM_EP_NUMBER				(BIT3|BIT4)
+
+#define		EEPROM_CHANNEL_PLAN_FCC				0x0
+#define		EEPROM_CHANNEL_PLAN_IC				0x1
+#define		EEPROM_CHANNEL_PLAN_ETSI			0x2
+#define		EEPROM_CHANNEL_PLAN_SPAIN			0x3
+#define		EEPROM_CHANNEL_PLAN_FRANCE			0x4
+#define		EEPROM_CHANNEL_PLAN_MKK				0x5
+#define		EEPROM_CHANNEL_PLAN_MKK1			0x6
+#define		EEPROM_CHANNEL_PLAN_ISRAEL			0x7
+#define		EEPROM_CHANNEL_PLAN_TELEC			0x8
+#define		EEPROM_CHANNEL_PLAN_GLOBAL_DOMAIN	0x9
+#define		EEPROM_CHANNEL_PLAN_WORLD_WIDE_13	0xA
+#define		EEPROM_CHANNEL_PLAN_BY_HW_MASK	0x80
+
+#define 		EEPROM_CID_DEFAULT				0x0
+#define 		EEPROM_CID_ALPHA				0x1
+#define		EEPROM_CID_CAMEO					0X8
+#define 		EEPROM_CID_SITECOM				0x9
+
+//#define EEPROM_CID_RUNTOP						0x2
+//#define EEPROM_CID_Senao						0x3
+//#define EEPROM_CID_TOSHIBA						0x4
+//#define EEPROM_CID_NetCore						0x5
+#define 		EEPROM_CID_WHQL 				0xFE // added by chiyoko for dtm, 20090108
+#endif
+
+//-----------------------------------------------------------------
+// 0x2c0 FW Command Control register definition, added by Roger, 2008.11.27.
+//-----------------------------------------------------------------
+#define		FW_DIG_DISABLE				0xfd00cc00
+#define		FW_DIG_ENABLE					0xfd000000
+#define		FW_DIG_HALT					0xfd000001
+#define		FW_DIG_RESUME					0xfd000002
+#define		FW_HIGH_PWR_DISABLE			0xfd000008
+#define		FW_HIGH_PWR_ENABLE			0xfd000009
+#define		FW_TXPWR_TRACK_ENABLE		0xfd000017
+#define		FW_TXPWR_TRACK_DISABLE		0xfd000018
+#define		FW_RA_RESET					0xfd0000af
+#define		FW_RA_ACTIVE					0xfd0000a6
+#define		FW_RA_REFRESH					0xfd0000a0
+#define		FW_RA_ENABLE_BG				0xfd0000ac
+#define		FW_IQK_ENABLE					0xf0000020
+#define		FW_IQK_SUCCESS				0x0000dddd
+#define		FW_IQK_FAIL					0x0000ffff
+#define		FW_OP_FAILURE					0xffffffff
+#define		FW_DM_DISABLE					0xfd00aa00
+#define		FW_BB_RESET_ENABLE			0xff00000d
+#define		FW_BB_RESET_DISABLE			0xff00000e
+#if 0
+//----------------------------------------------------------------------------
+//       8190 EEROM
+//----------------------------------------------------------------------------
+#define		RTL8190_EEPROM_ID					0x8129
+//#define		EEPROM_NODE_ADDRESS_BYTE_0			0x0C
+
+#define		EEPROM_RFInd_PowerDiff				0x28
+#define		EEPROM_ThermalMeter					0x29
+#define		EEPROM_TxPwDiff_CrystalCap			0x2A	//0x2A~0x2B
+#define		EEPROM_TxPwIndex_CCK				0x2C	//0x2C~0x39
+#define		EEPROM_TxPwIndex_OFDM_24G			0x3A	//0x3A~0x47
+#define		EEPROM_TxPwIndex_OFDM_5G			0x34	//0x34~0x7B
+
+//The following definition is for eeprom 93c56......modified 20080220
+#define		EEPROM_C56_CrystalCap				0x17	//0x17
+#define		EEPROM_C56_RfA_CCK_Chnl1_TxPwIndex	0x80	//0x80
+#define		EEPROM_C56_RfA_HT_OFDM_TxPwIndex	0x81	//0x81~0x83
+#define		EEPROM_C56_RfC_CCK_Chnl1_TxPwIndex	0xbc	//0xb8
+#define		EEPROM_C56_RfC_HT_OFDM_TxPwIndex	0xb9	//0xb9~0xbb
+#define		EEPROM_Customer_ID					0x7B	//0x7B:CustomerID
+#define		EEPROM_ICVersion_ChannelPlan		0x7C	//0x7C:ChnlPlan,
+														//0x7D:IC_Ver
+#define		EEPROM_CRC							0x7E	//0x7E~0x7F
+
+#define		EEPROM_Default_LegacyHTTxPowerDiff	0x4
+#define		EEPROM_Default_ThermalMeter			0x77
+#define		EEPROM_Default_AntTxPowerDiff		0x0
+#define		EEPROM_Default_TxPwDiff_CrystalCap	0x5
+#define		EEPROM_Default_TxPower				0x1010
+#define		EEPROM_Default_TxPowerLevel			0x10
+
+//
+// Define Different EEPROM type for customer
+//
+#define		EEPROM_CID_DEFAULT					0x0
+#define		EEPROM_CID_CAMEO					0x1
+#define		EEPROM_CID_RUNTOP					0x2
+#define		EEPROM_CID_Senao					0x3
+#define		EEPROM_CID_TOSHIBA					0x4
+#define		EEPROM_CID_NetCore					0x5
+#define		EEPROM_CID_Nettronix				0x6
+#define		EEPROM_CID_Pronet					0x7
+
+#endif
+
+//
+//--------------92SU require delete or move to other place later
+//
+
+
+
+//
+//
+// 2008/08/06 MH For share the same 92S source/header files, we copy some
+// definition to pass 92SU compiler. But we must delete thm later.
+//
+//
+
+//============================================================================
+//       819xUsb Regsiter offset definition
+//============================================================================
+
+//2 define it temp!!!
+#define RFPC					0x5F			// Rx FIFO Packet Count
+#define RCR_9356SEL			BIT6
+#define TCR_LRL_OFFSET		0
+#define TCR_SRL_OFFSET		8
+#define TCR_MXDMA_OFFSET	21
+#define TCR_MXDMA_2048 		7
+#define TCR_SAT				BIT24		// Enable Rate depedent ack timeout timer
+#define RCR_MXDMA_OFFSET	8
+#define RCR_FIFO_OFFSET		13
+#define RCR_OnlyErlPkt		BIT31				// Rx Early mode is performed for packet size greater than 1536
+#define CWR					0xDC			// Contention window register
+#define RetryCTR				0xDE			// Retry Count register
+
+
+// For backward compatible for 9xUSB
+#define		LED1Cfg				UnusedRegister	// LED1 Configuration Register
+#define 	LED0Cfg				UnusedRegister	// LED0 Configuration Register
+#define 	GPI					UnusedRegister	// LED0 Configuration Register
+#define 	BRSR				UnusedRegister	// LED0 Configuration Register
+#define 	CPU_GEN				UnusedRegister	// LED0 Configuration Register
+#define 	SIFS				UnusedRegister	// LED0 Configuration Register
+
+//----------------------------------------------------------------------------
+//       8190 CPU General Register		(offset 0x100, 4 byte)
+//----------------------------------------------------------------------------
+//#define 	CPU_CCK_LOOPBACK			0x00030000
+#define 	CPU_GEN_SYSTEM_RESET		0x00000001
+//#define 	CPU_GEN_FIRMWARE_RESET	0x00000008
+//#define 	CPU_GEN_BOOT_RDY			0x00000010
+//#define 	CPU_GEN_FIRM_RDY			0x00000020
+//#define 	CPU_GEN_PUT_CODE_OK		0x00000080
+//#define 	CPU_GEN_BB_RST			0x00000100
+//#define 	CPU_GEN_PWR_STB_CPU		0x00000004
+//#define 	CPU_GEN_NO_LOOPBACK_MSK	0xFFF8FFFF		// Set bit18,17,16 to 0. Set bit19
+//#define 	CPU_GEN_NO_LOOPBACK_SET	0x00080000		// Set BIT19 to 1
+
+//----------------------------------------------------------------------------
+//       8192S EEROM
+//----------------------------------------------------------------------------
+
+//#define RTL8190_EEPROM_ID				0x8129
+//#define EEPROM_VID						0x08
+//#define EEPROM_PID						0x0A
+//#define EEPROM_USB_OPTIONAL			0x0C
+//#define EEPROM_NODE_ADDRESS_BYTE_0	0x12
+//
+//#define EEPROM_TxPowerDiff				0x1F
+//#define EEPROM_ThermalMeter			0x20
+//#define EEPROM_PwDiff					0x21	//0x21
+//#define EEPROM_CrystalCap				0x22	//0x22
+//
+//#define EEPROM_TxPwIndex_CCK			0x23	//0x23
+//#define EEPROM_TxPwIndex_OFDM_24G	0x24	//0x24~0x26
+#define EEPROM_TxPwIndex_CCK_V1			0x29	//0x29~0x2B
+#define EEPROM_TxPwIndex_OFDM_24G_V1	0x2C	//0x2C~0x2E
+#define EEPROM_TxPwIndex_Ver				0x27	//0x27
+//
+//#define EEPROM_Default_TxPowerDiff		0x0
+//#define EEPROM_Default_ThermalMeter	0x7
+//#define EEPROM_Default_PwDiff			0x4
+//#define EEPROM_Default_CrystalCap		0x5
+//#define EEPROM_Default_TxPower			0x1010
+//#define EEPROM_Customer_ID				0x7B	//0x7B:CustomerID
+//#define EEPROM_Version					0x50	// 0x50
+//#define EEPROM_CustomID				0x52
+//#define EEPROM_ChannelPlan				0x7c	//0x7C
+//#define EEPROM_IC_VER					0x7d	//0x7D
+//#define EEPROM_CRC						0x7e	//0x7E~0x7F
+//
+//
+//#define EEPROM_CID_DEFAULT			0x0
+//#define EEPROM_CID_CAMEO				0x1
+//#define EEPROM_CID_RUNTOP				0x2
+//#define EEPROM_CID_Senao				0x3
+//#define EEPROM_CID_TOSHIBA				0x4	// Toshiba setting, Merge by Jacken, 2008/01/31
+//#define EEPROM_CID_NetCore				0x5
+
+
+//
+//--------------92SU require delete or move to other place later
+//
+
+//============================================================
+// CCX Related Register
+//============================================================
+#define		CCX_COMMAND_REG			0x890
+// CCX Measurement Command Register. 4 Bytes.
+// Bit[0]: R_CLM_En, 1=enable, 0=disable. Enable or disable "Channel Load
+// Measurement (CLM)".
+// Bit[1]: R_NHM_En, 1=enable, 0=disable. Enable or disalbe "Noise Histogram
+// Measurement (NHM)".
+// Bit[2~7]: Reserved
+// Bit[8]: R_CCX_En: 1=enable, 0=disable. Enable or disable CCX function.
+// Note: After clearing this bit, all the result of all NHM_Result and CLM_
+// Result are cleared concurrently.
+// Bit[9]: R_Ignore_CCA: 1=enable, 0=disable. Enable means that treat CCA
+// period as idle time for NHM.
+// Bit[10]: R_Ignore_TXON: 1=enable, 0=disable. Enable means that treat TXON
+// period as idle time for NHM.
+// Bit[11~31]: Reserved.
+#define		CLM_PERIOD_REG			0x894
+// CCX Measurement Period Register, in unit of 4us. 2 Bytes.
+#define		NHM_PERIOD_REG			0x896
+// Noise Histogram Measurement Period Register, in unit of 4us. 2Bytes.
+#define		NHM_THRESHOLD0			0x898	// Noise Histogram Meashorement0
+#define		NHM_THRESHOLD1			0x899	// Noise Histogram Meashorement1
+#define		NHM_THRESHOLD2			0x89A	// Noise Histogram Meashorement2
+#define		NHM_THRESHOLD3			0x89B	// Noise Histogram Meashorement3
+#define		NHM_THRESHOLD4			0x89C	// Noise Histogram Meashorement4
+#define		NHM_THRESHOLD5			0x89D	// Noise Histogram Meashorement5
+#define		NHM_THRESHOLD6			0x89E	// Noise Histogram Meashorement6
+#define		CLM_RESULT_REG			0x8D0
+// Channel Load result register. 4 Bytes.
+// Bit[0~15]: Total measured duration of CLM. The CCA busy fraction is caculate
+// by CLM_RESULT_REG/CLM_PERIOD_REG.
+// Bit[16]: Indicate the CLM result is ready.
+// Bit[17~31]: Reserved.
+#define		NHM_RESULT_REG			0x8D4
+// Noise Histogram result register. 4 Bytes.
+// Bit[0~15]: Total measured duration of NHM. If R_Ignore_CCA=1 or
+// R_Ignore_TXON=1, this value will be less than NHM_PERIOD_REG.
+// Bit[16]: Indicate the NHM result is ready.
+// Bit[17~31]: Reserved.
+#define		NHM_RPI_COUNTER0		0x8D8
+// NHM RPI counter0, the fraction of signal strength < NHM_THRESHOLD0.
+#define		NHM_RPI_COUNTER1		0x8D9
+// NHM RPI counter1, the fraction of signal stren in NHM_THRESH0, NHM_THRESH1
+#define		NHM_RPI_COUNTER2		0x8DA
+// NHM RPI counter2, the fraction of signal stren in NHM_THRESH2, NHM_THRESH3
+#define		NHM_RPI_COUNTER3		0x8DB
+// NHM RPI counter3, the fraction of signal stren in NHM_THRESH4, NHM_THRESH5
+#define		NHM_RPI_COUNTER4		0x8DC
+// NHM RPI counter4, the fraction of signal stren in NHM_THRESH6, NHM_THRESH7
+#define		NHM_RPI_COUNTER5		0x8DD
+// NHM RPI counter5, the fraction of signal stren in NHM_THRESH8, NHM_THRESH9
+#define		NHM_RPI_COUNTER6		0x8DE
+// NHM RPI counter6, the fraction of signal stren in NHM_THRESH10, NHM_THRESH11
+#define		NHM_RPI_COUNTER7		0x8DF
+// NHM RPI counter7, the fraction of signal stren in NHM_THRESH12, NHM_THRESH13
+
+#define HAL_RETRY_LIMIT_INFRA							48
+#define HAL_RETRY_LIMIT_AP_ADHOC						7
+
+// HW Readio OFF switch (GPIO BIT)
+#define		HAL_8192S_HW_GPIO_OFF_BIT	BIT3
+#define		HAL_8192S_HW_GPIO_OFF_MASK	0xF7
+#define		HAL_8192S_HW_GPIO_WPS_BIT	BIT4
+
+#endif  //R8192S_HW
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/drivers/staging/rtl8192su/r8192S_phy.c b/drivers/staging/rtl8192su/r8192S_phy.c
new file mode 100644
index 00000000000..99a4051a845
--- /dev/null
+++ b/drivers/staging/rtl8192su/r8192S_phy.c
@@ -0,0 +1,5028 @@
+/******************************************************************************
+
+     (c) Copyright 2008, RealTEK Technologies Inc. All Rights Reserved.
+
+ Module:	hal8192sphy.c
+
+ Note:		Merge 92SE/SU PHY config as below
+			1. BB register R/W API
+ 			2. RF register R/W API
+ 			3. Initial BB/RF/MAC config by reading BB/MAC/RF txt.
+ 			3. Power setting API
+ 			4. Channel switch API
+ 			5. Initial gain switch API.
+ 			6. Other BB/MAC/RF API.
+
+ Function:	PHY: Extern function, phy: local function
+
+ Export:	PHY_FunctionName
+
+ Abbrev:	NONE
+
+ History:
+	Data		Who		Remark
+	08/08/2008  MHC    	1. Port from 9x series phycfg.c
+						2. Reorganize code arch and ad description.
+						3. Collect similar function.
+						4. Seperate extern/local API.
+	08/12/2008	MHC		We must merge or move USB PHY relative function later.
+	10/07/2008	MHC		Add IQ calibration for PHY.(Only 1T2R mode now!!!)
+	11/06/2008	MHC		Add TX Power index PG file to config in 0xExx register
+						area to map with EEPROM/EFUSE tx pwr index.
+
+******************************************************************************/
+#include "r8192U.h"
+#include "r8192U_dm.h"
+#include "r8192S_rtl6052.h"
+
+#ifdef RTL8192SU
+#include "r8192S_hw.h"
+#include "r8192S_phy.h"
+#include "r8192S_phyreg.h"
+#include "r8192SU_HWImg.h"
+//#include "r8192S_FwImgDTM.h"
+#else
+#include "r8192U_hw.h"
+#include "r819xU_phy.h"
+#include "r819xU_phyreg.h"
+#endif
+
+#ifdef ENABLE_DOT11D
+#include "dot11d.h"
+#endif
+
+/*---------------------------Define Local Constant---------------------------*/
+/* Channel switch:The size of command tables for switch channel*/
+#define MAX_PRECMD_CNT 16
+#define MAX_RFDEPENDCMD_CNT 16
+#define MAX_POSTCMD_CNT 16
+#define MAX_DOZE_WAITING_TIMES_9x 64
+
+/*------------------------Define local variable------------------------------*/
+// 2004-05-11
+#ifndef RTL8192SU
+static u32	RF_CHANNEL_TABLE_ZEBRA[]={
+		0,
+		0x085c,//2412 1
+		0x08dc,//2417 2
+		0x095c,//2422 3
+		0x09dc,//2427 4
+		0x0a5c,//2432 5
+		0x0adc,//2437 6
+		0x0b5c,//2442 7
+		0x0bdc,//2447 8
+		0x0c5c,//2452 9
+		0x0cdc,//2457 10
+		0x0d5c,//2462 11
+		0x0ddc,//2467 12
+		0x0e5c,//2472 13
+		//0x0f5c,//2484
+		0x0f72,//2484  //20040810
+};
+#endif
+
+static	u32
+phy_CalculateBitShift(u32 BitMask);
+static	RT_STATUS
+phy_ConfigMACWithHeaderFile(struct net_device* dev);
+static void
+phy_InitBBRFRegisterDefinition(struct net_device* dev);
+static	RT_STATUS
+phy_BB8192S_Config_ParaFile(struct net_device* dev);
+static	RT_STATUS
+phy_ConfigBBWithHeaderFile(struct net_device* dev,u8 ConfigType);
+static bool
+phy_SetRFPowerState8192SU(struct net_device* dev,RT_RF_POWER_STATE eRFPowerState);
+void
+SetBWModeCallback8192SUsbWorkItem(struct net_device *dev);
+void
+SetBWModeCallback8192SUsbWorkItem(struct net_device *dev);
+void
+SwChnlCallback8192SUsbWorkItem(struct net_device *dev );
+static void
+phy_FinishSwChnlNow(struct net_device* dev,u8 channel);
+static bool
+phy_SwChnlStepByStep(
+	struct net_device* dev,
+	u8		channel,
+	u8		*stage,
+	u8		*step,
+	u32		*delay
+	);
+static RT_STATUS
+phy_ConfigBBWithPgHeaderFile(struct net_device* dev,u8 ConfigType);
+#ifdef RTL8192SE
+static  u32 phy_FwRFSerialRead( struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset);
+static u32 phy_RFSerialRead(struct net_device* dev,RF90_RADIO_PATH_E eRFPath,u32 Offset);
+static	void phy_FwRFSerialWrite( struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data);
+static void phy_RFSerialWrite( struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data);
+#endif
+static long phy_TxPwrIdxToDbm( struct net_device* dev, WIRELESS_MODE   WirelessMode, u8 TxPwrIdx);
+static u8 phy_DbmToTxPwrIdx( struct net_device* dev, WIRELESS_MODE WirelessMode, long PowerInDbm);
+void phy_SetFwCmdIOCallback(struct net_device* dev);
+
+//#if ((HAL_CODE_BASE == RTL8192_S) && (DEV_BUS_TYPE==USB_INTERFACE))
+#ifdef RTL8192SU
+//
+// Description:
+//	Base Band read by 4181 to make sure that operation could be done in unlimited cycle.
+//
+// Assumption:
+//		-	Only use on RTL8192S USB interface.
+//		-	PASSIVE LEVEL
+//
+// Created by Roger, 2008.09.06.
+//
+//use in phy only
+u32 phy_QueryUsbBBReg(struct net_device* dev, u32	RegAddr)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u32	ReturnValue = 0xffffffff;
+	u8	PollingCnt = 50;
+	u8	BBWaitCounter = 0;
+
+
+	//
+	// <Roger_Notes> Due to PASSIVE_LEVEL, so we ONLY simply busy waiting for a while here.
+	// We have to make sure that previous BB I/O has been done.
+	// 2008.08.20.
+	//
+	while(priv->bChangeBBInProgress)
+	{
+		BBWaitCounter ++;
+		RT_TRACE(COMP_RF, "phy_QueryUsbBBReg(): Wait 1 ms (%d times)...\n", BBWaitCounter);
+		msleep(1); // 1 ms
+
+		// Wait too long, return FALSE to avoid to be stuck here.
+		if((BBWaitCounter > 100) )//||RT_USB_CANNOT_IO(Adapter))
+		{
+			RT_TRACE(COMP_RF, "phy_QueryUsbBBReg(): (%d) Wait too logn to query BB!!\n", BBWaitCounter);
+			return ReturnValue;
+		}
+	}
+
+	priv->bChangeBBInProgress = true;
+
+	read_nic_dword(dev, RegAddr);
+
+	do
+	{// Make sure that access could be done.
+		if((read_nic_byte(dev, PHY_REG)&HST_RDBUSY) == 0)
+			break;
+	}while( --PollingCnt );
+
+	if(PollingCnt == 0)
+	{
+		RT_TRACE(COMP_RF, "Fail!!!phy_QueryUsbBBReg(): RegAddr(%#x) = %#x\n", RegAddr, ReturnValue);
+	}
+	else
+	{
+		// Data FW read back.
+		ReturnValue = read_nic_dword(dev, PHY_REG_DATA);
+		RT_TRACE(COMP_RF, "phy_QueryUsbBBReg(): RegAddr(%#x) = %#x, PollingCnt(%d)\n", RegAddr, ReturnValue, PollingCnt);
+	}
+
+	priv->bChangeBBInProgress = false;
+
+	return ReturnValue;
+}
+
+
+
+//
+// Description:
+//	Base Band wrote by 4181 to make sure that operation could be done in unlimited cycle.
+//
+// Assumption:
+//		-	Only use on RTL8192S USB interface.
+//		-	PASSIVE LEVEL
+//
+// Created by Roger, 2008.09.06.
+//
+//use in phy only
+void
+phy_SetUsbBBReg(struct net_device* dev,u32	RegAddr,u32 Data)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u8	BBWaitCounter = 0;
+
+	RT_TRACE(COMP_RF, "phy_SetUsbBBReg(): RegAddr(%#x) <= %#x\n", RegAddr, Data);
+
+	//
+	// <Roger_Notes> Due to PASSIVE_LEVEL, so we ONLY simply busy waiting for a while here.
+	// We have to make sure that previous BB I/O has been done.
+	// 2008.08.20.
+	//
+	while(priv->bChangeBBInProgress)
+	{
+		BBWaitCounter ++;
+		RT_TRACE(COMP_RF, "phy_SetUsbBBReg(): Wait 1 ms (%d times)...\n", BBWaitCounter);
+		msleep(1); // 1 ms
+
+		if((BBWaitCounter > 100))// || RT_USB_CANNOT_IO(Adapter))
+		{
+			RT_TRACE(COMP_RF, "phy_SetUsbBBReg(): (%d) Wait too logn to query BB!!\n", BBWaitCounter);
+			return;
+		}
+	}
+
+	priv->bChangeBBInProgress = true;
+	//printk("**************%s: RegAddr:%x Data:%x\n", __FUNCTION__,RegAddr, Data);
+	write_nic_dword(dev, RegAddr, Data);
+
+	priv->bChangeBBInProgress = false;
+}
+
+
+
+//
+// Description:
+//	RF read by 4181 to make sure that operation could be done in unlimited cycle.
+//
+// Assumption:
+//		-	Only use on RTL8192S USB interface.
+//		-	PASSIVE LEVEL
+//		- 	RT_RF_OPERATE_SPINLOCK is acquired and keep on holding to the end.FIXLZM
+//
+// Created by Roger, 2008.09.06.
+//
+//use in phy only
+u32 phy_QueryUsbRFReg(	struct net_device* dev, RF90_RADIO_PATH_E eRFPath,	u32	Offset)
+{
+
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	//u32	value  = 0, ReturnValue = 0;
+	u32	ReturnValue = 0;
+	//u32 	tmplong,tmplong2;
+	u8	PollingCnt = 50;
+	u8	RFWaitCounter = 0;
+
+
+	//
+	// <Roger_Notes> Due to PASSIVE_LEVEL, so we ONLY simply busy waiting for a while here.
+	// We have to make sure that previous RF I/O has been done.
+	// 2008.08.20.
+	//
+	while(priv->bChangeRFInProgress)
+	{
+		//PlatformReleaseSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK);
+		//spin_lock_irqsave(&priv->rf_lock, flags);	//LZM,090318
+		down(&priv->rf_sem);
+
+		RFWaitCounter ++;
+		RT_TRACE(COMP_RF, "phy_QueryUsbRFReg(): Wait 1 ms (%d times)...\n", RFWaitCounter);
+		msleep(1); // 1 ms
+
+		if((RFWaitCounter > 100)) //|| RT_USB_CANNOT_IO(Adapter))
+		{
+			RT_TRACE(COMP_RF, "phy_QueryUsbRFReg(): (%d) Wait too logn to query BB!!\n", RFWaitCounter);
+			return 0xffffffff;
+		}
+		else
+		{
+			//PlatformAcquireSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK);
+		}
+	}
+
+	priv->bChangeRFInProgress = true;
+	//PlatformReleaseSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK);
+
+
+	Offset &= 0x3f; //RF_Offset= 0x00~0x3F
+
+	write_nic_dword(dev, RF_BB_CMD_ADDR, 0xF0000002|
+						(Offset<<8)|	//RF_Offset= 0x00~0x3F
+						(eRFPath<<16)); 	//RF_Path = 0(A) or 1(B)
+
+	do
+	{// Make sure that access could be done.
+		if(read_nic_dword(dev, RF_BB_CMD_ADDR) == 0)
+			break;
+	}while( --PollingCnt );
+
+	// Data FW read back.
+	ReturnValue = read_nic_dword(dev, RF_BB_CMD_DATA);
+
+	//PlatformAcquireSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK);
+	//spin_unlock_irqrestore(&priv->rf_lock, flags);   //LZM,090318
+	up(&priv->rf_sem);
+	priv->bChangeRFInProgress = false;
+
+	RT_TRACE(COMP_RF, "phy_QueryUsbRFReg(): eRFPath(%d), Offset(%#x) = %#x\n", eRFPath, Offset, ReturnValue);
+
+	return ReturnValue;
+
+}
+
+
+//
+// Description:
+//	RF wrote by 4181 to make sure that operation could be done in unlimited cycle.
+//
+// Assumption:
+//		-	Only use on RTL8192S USB interface.
+//		-	PASSIVE LEVEL
+//		- 	RT_RF_OPERATE_SPINLOCK is acquired and keep on holding to the end.FIXLZM
+//
+// Created by Roger, 2008.09.06.
+//
+//use in phy only
+void phy_SetUsbRFReg(struct net_device* dev,RF90_RADIO_PATH_E eRFPath,u32	RegAddr,u32 Data)
+{
+
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u8	PollingCnt = 50;
+	u8	RFWaitCounter = 0;
+
+
+	//
+	// <Roger_Notes> Due to PASSIVE_LEVEL, so we ONLY simply busy waiting for a while here.
+	// We have to make sure that previous BB I/O has been done.
+	// 2008.08.20.
+	//
+	while(priv->bChangeRFInProgress)
+	{
+		//PlatformReleaseSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK);
+		//spin_lock_irqsave(&priv->rf_lock, flags);	//LZM,090318
+		down(&priv->rf_sem);
+
+		RFWaitCounter ++;
+		RT_TRACE(COMP_RF, "phy_SetUsbRFReg(): Wait 1 ms (%d times)...\n", RFWaitCounter);
+		msleep(1); // 1 ms
+
+		if((RFWaitCounter > 100))// || RT_USB_CANNOT_IO(Adapter))
+		{
+			RT_TRACE(COMP_RF, "phy_SetUsbRFReg(): (%d) Wait too logn to query BB!!\n", RFWaitCounter);
+			return;
+		}
+		else
+		{
+			//PlatformAcquireSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK);
+		}
+	}
+
+	priv->bChangeRFInProgress = true;
+	//PlatformReleaseSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK);
+
+
+	RegAddr &= 0x3f; //RF_Offset= 0x00~0x3F
+
+	write_nic_dword(dev, RF_BB_CMD_DATA, Data);
+	write_nic_dword(dev, RF_BB_CMD_ADDR, 0xF0000003|
+					(RegAddr<<8)| //RF_Offset= 0x00~0x3F
+					(eRFPath<<16));  //RF_Path = 0(A) or 1(B)
+
+	do
+	{// Make sure that access could be done.
+		if(read_nic_dword(dev, RF_BB_CMD_ADDR) == 0)
+				break;
+	}while( --PollingCnt );
+
+	if(PollingCnt == 0)
+	{
+		RT_TRACE(COMP_RF, "phy_SetUsbRFReg(): Set RegAddr(%#x) = %#x Fail!!!\n", RegAddr, Data);
+	}
+
+	//PlatformAcquireSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK);
+	//spin_unlock_irqrestore(&priv->rf_lock, flags);   //LZM,090318
+	up(&priv->rf_sem);
+	priv->bChangeRFInProgress = false;
+
+}
+
+#endif
+
+/*---------------------Define local function prototype-----------------------*/
+
+
+/*----------------------------Function Body----------------------------------*/
+//
+// 1. BB register R/W API
+//
+/**
+* Function:	PHY_QueryBBReg
+*
+* OverView:	Read "sepcific bits" from BB register
+*
+* Input:
+*			PADAPTER		Adapter,
+*			u32			RegAddr,		//The target address to be readback
+*			u32			BitMask		//The target bit position in the target address
+*										//to be readback
+* Output:	None
+* Return:		u32			Data			//The readback register value
+* Note:		This function is equal to "GetRegSetting" in PHY programming guide
+*/
+//use phy dm core 8225 8256 6052
+//u32 PHY_QueryBBReg(struct net_device* dev,u32		RegAddr,	u32		BitMask)
+u32 rtl8192_QueryBBReg(struct net_device* dev, u32 RegAddr, u32 BitMask)
+{
+
+  	u32	ReturnValue = 0, OriginalValue, BitShift;
+
+#if (DISABLE_BB_RF == 1)
+	return 0;
+#endif
+
+	RT_TRACE(COMP_RF, "--->PHY_QueryBBReg(): RegAddr(%#x), BitMask(%#x)\n", RegAddr, BitMask);
+
+	//
+	// <Roger_Notes> Due to 8051 operation cycle (limitation cycle: 6us) and 1-Byte access issue, we should use
+	// 4181 to access Base Band instead of 8051 on USB interface to make sure that access could be done in
+	// infinite cycle.
+	// 2008.09.06.
+	//
+//#if ((HAL_CODE_BASE == RTL8192_S) && (DEV_BUS_TYPE==USB_INTERFACE))
+#ifdef RTL8192SU
+	if(IS_BB_REG_OFFSET_92S(RegAddr))
+	{
+		//if(RT_USB_CANNOT_IO(Adapter))	return	FALSE;
+
+		if((RegAddr & 0x03) != 0)
+		{
+			printk("%s: Not DWORD alignment!!\n", __FUNCTION__);
+			return 0;
+		}
+
+	OriginalValue = phy_QueryUsbBBReg(dev, RegAddr);
+	}
+	else
+#endif
+	{
+	OriginalValue = read_nic_dword(dev, RegAddr);
+	}
+
+	BitShift = phy_CalculateBitShift(BitMask);
+	ReturnValue = (OriginalValue & BitMask) >> BitShift;
+
+	//RTPRINT(FPHY, PHY_BBR, ("BBR MASK=0x%x Addr[0x%x]=0x%x\n", BitMask, RegAddr, OriginalValue));
+	RT_TRACE(COMP_RF, "<---PHY_QueryBBReg(): RegAddr(%#x), BitMask(%#x), OriginalValue(%#x)\n", RegAddr, BitMask, OriginalValue);
+	return (ReturnValue);
+}
+
+/**
+* Function:	PHY_SetBBReg
+*
+* OverView:	Write "Specific bits" to BB register (page 8~)
+*
+* Input:
+*			PADAPTER		Adapter,
+*			u32			RegAddr,		//The target address to be modified
+*			u32			BitMask		//The target bit position in the target address
+*										//to be modified
+*			u32			Data			//The new register value in the target bit position
+*										//of the target address
+*
+* Output:	None
+* Return:		None
+* Note:		This function is equal to "PutRegSetting" in PHY programming guide
+*/
+//use phy dm core 8225 8256
+//void PHY_SetBBReg(struct net_device* dev,u32		RegAddr,	u32		BitMask,	u32		Data	)
+void rtl8192_setBBreg(struct net_device* dev, u32 RegAddr, u32 BitMask, u32 Data)
+{
+	u32	OriginalValue, BitShift, NewValue;
+
+#if (DISABLE_BB_RF == 1)
+	return;
+#endif
+
+	RT_TRACE(COMP_RF, "--->PHY_SetBBReg(): RegAddr(%#x), BitMask(%#x), Data(%#x)\n", RegAddr, BitMask, Data);
+
+	//
+	// <Roger_Notes> Due to 8051 operation cycle (limitation cycle: 6us) and 1-Byte access issue, we should use
+	// 4181 to access Base Band instead of 8051 on USB interface to make sure that access could be done in
+	// infinite cycle.
+	// 2008.09.06.
+	//
+//#if ((HAL_CODE_BASE == RTL8192_S) && (DEV_BUS_TYPE==USB_INTERFACE))
+#ifdef RTL8192SU
+	if(IS_BB_REG_OFFSET_92S(RegAddr))
+	{
+		if((RegAddr & 0x03) != 0)
+		{
+			printk("%s: Not DWORD alignment!!\n", __FUNCTION__);
+			return;
+		}
+
+		if(BitMask!= bMaskDWord)
+		{//if not "double word" write
+			OriginalValue = phy_QueryUsbBBReg(dev, RegAddr);
+			BitShift = phy_CalculateBitShift(BitMask);
+            NewValue = (((OriginalValue) & (~BitMask))|(Data << BitShift));
+			phy_SetUsbBBReg(dev, RegAddr, NewValue);
+		}else
+			phy_SetUsbBBReg(dev, RegAddr, Data);
+	}
+	else
+#endif
+	{
+		if(BitMask!= bMaskDWord)
+		{//if not "double word" write
+			OriginalValue = read_nic_dword(dev, RegAddr);
+			BitShift = phy_CalculateBitShift(BitMask);
+			NewValue = (((OriginalValue) & (~BitMask)) | (Data << BitShift));
+			write_nic_dword(dev, RegAddr, NewValue);
+		}else
+			write_nic_dword(dev, RegAddr, Data);
+	}
+
+	//RT_TRACE(COMP_RF, "<---PHY_SetBBReg(): RegAddr(%#x), BitMask(%#x), Data(%#x)\n", RegAddr, BitMask, Data);
+
+	return;
+}
+
+
+//
+// 2. RF register R/W API
+//
+/**
+* Function:	PHY_QueryRFReg
+*
+* OverView:	Query "Specific bits" to RF register (page 8~)
+*
+* Input:
+*			PADAPTER		Adapter,
+*			RF90_RADIO_PATH_E	eRFPath,	//Radio path of A/B/C/D
+*			u32			RegAddr,		//The target address to be read
+*			u32			BitMask		//The target bit position in the target address
+*										//to be read
+*
+* Output:	None
+* Return:		u32			Readback value
+* Note:		This function is equal to "GetRFRegSetting" in PHY programming guide
+*/
+//in dm 8256 and phy
+//u32 PHY_QueryRFReg(struct net_device* dev,	RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask)
+u32 rtl8192_phy_QueryRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask)
+{
+	u32 Original_Value, Readback_Value, BitShift;//, flags;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+#if (DISABLE_BB_RF == 1)
+	return 0;
+#endif
+
+	RT_TRACE(COMP_RF, "--->PHY_QueryRFReg(): RegAddr(%#x), eRFPath(%#x), BitMask(%#x)\n", RegAddr, eRFPath,BitMask);
+
+	if (!((priv->rf_pathmap >> eRFPath) & 0x1))
+	{
+		printk("EEEEEError: rfpath off! rf_pathmap=%x eRFPath=%x\n", priv->rf_pathmap, eRFPath);
+		return 0;
+	}
+
+	if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
+	{
+		printk("EEEEEError: not legal rfpath! eRFPath=%x\n", eRFPath);
+		return 0;
+	}
+
+	/* 2008/01/17 MH We get and release spin lock when reading RF register. */
+	//PlatformAcquireSpinLock(dev, RT_RF_OPERATE_SPINLOCK);FIXLZM
+	//spin_lock_irqsave(&priv->rf_lock, flags);	//YJ,test,090113
+	down(&priv->rf_sem);
+	//
+	// <Roger_Notes> Due to 8051 operation cycle (limitation cycle: 6us) and 1-Byte access issue, we should use
+	// 4181 to access Base Band instead of 8051 on USB interface to make sure that access could be done in
+	// infinite cycle.
+	// 2008.09.06.
+	//
+//#if (HAL_CODE_BASE == RTL8192_S && DEV_BUS_TYPE==USB_INTERFACE)
+#ifdef RTL8192SU
+	//if(RT_USB_CANNOT_IO(Adapter))	return FALSE;
+	Original_Value = phy_QueryUsbRFReg(dev, eRFPath, RegAddr);
+#else
+	if (priv->Rf_Mode == RF_OP_By_FW)
+	{
+		Original_Value = phy_FwRFSerialRead(dev, eRFPath, RegAddr);
+	}
+	else
+	{
+		Original_Value = phy_RFSerialRead(dev, eRFPath, RegAddr);
+	}
+#endif
+
+	BitShift =  phy_CalculateBitShift(BitMask);
+	Readback_Value = (Original_Value & BitMask) >> BitShift;
+	//spin_unlock_irqrestore(&priv->rf_lock, flags);   //YJ,test,090113
+	up(&priv->rf_sem);
+	//PlatformReleaseSpinLock(dev, RT_RF_OPERATE_SPINLOCK);
+
+	//RTPRINT(FPHY, PHY_RFR, ("RFR-%d MASK=0x%x Addr[0x%x]=0x%x\n", eRFPath, BitMask, RegAddr, Original_Value));
+
+	return (Readback_Value);
+}
+
+/**
+* Function:	PHY_SetRFReg
+*
+* OverView:	Write "Specific bits" to RF register (page 8~)
+*
+* Input:
+*			PADAPTER		Adapter,
+*			RF90_RADIO_PATH_E	eRFPath,	//Radio path of A/B/C/D
+*			u32			RegAddr,		//The target address to be modified
+*			u32			BitMask		//The target bit position in the target address
+*										//to be modified
+*			u32			Data			//The new register Data in the target bit position
+*										//of the target address
+*
+* Output:	None
+* Return:		None
+* Note:		This function is equal to "PutRFRegSetting" in PHY programming guide
+*/
+//use phy  8225 8256
+//void PHY_SetRFReg(struct net_device* dev,RF90_RADIO_PATH_E eRFPath, u32	RegAddr,	u32 BitMask,u32	Data	)
+void rtl8192_phy_SetRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask, u32 Data)
+{
+
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u32 Original_Value, BitShift, New_Value;//, flags;
+#if (DISABLE_BB_RF == 1)
+	return;
+#endif
+
+	RT_TRACE(COMP_RF, "--->PHY_SetRFReg(): RegAddr(%#x), BitMask(%#x), Data(%#x), eRFPath(%#x)\n",
+		RegAddr, BitMask, Data, eRFPath);
+
+	if (!((priv->rf_pathmap >> eRFPath) & 0x1))
+	{
+		printk("EEEEEError: rfpath off! rf_pathmap=%x eRFPath=%x\n", priv->rf_pathmap, eRFPath);
+		return ;
+	}
+	if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
+	{
+		printk("EEEEEError: not legal rfpath! eRFPath=%x\n", eRFPath);
+		return;
+	}
+
+	/* 2008/01/17 MH We get and release spin lock when writing RF register. */
+	//PlatformAcquireSpinLock(dev, RT_RF_OPERATE_SPINLOCK);
+	//spin_lock_irqsave(&priv->rf_lock, flags);	//YJ,test,090113
+	down(&priv->rf_sem);
+	//
+	// <Roger_Notes> Due to 8051 operation cycle (limitation cycle: 6us) and 1-Byte access issue, we should use
+	// 4181 to access Base Band instead of 8051 on USB interface to make sure that access could be done in
+	// infinite cycle.
+	// 2008.09.06.
+	//
+//#if (HAL_CODE_BASE == RTL8192_S && DEV_BUS_TYPE==USB_INTERFACE)
+#ifdef RTL8192SU
+		//if(RT_USB_CANNOT_IO(Adapter))	return;
+
+		if (BitMask != bRFRegOffsetMask) // RF data is 12 bits only
+		{
+			Original_Value = phy_QueryUsbRFReg(dev, eRFPath, RegAddr);
+			BitShift =  phy_CalculateBitShift(BitMask);
+			New_Value = (((Original_Value)&(~BitMask))|(Data<< BitShift));
+			phy_SetUsbRFReg(dev, eRFPath, RegAddr, New_Value);
+		}
+		else
+			phy_SetUsbRFReg(dev, eRFPath, RegAddr, Data);
+#else
+	if (priv->Rf_Mode == RF_OP_By_FW)
+	{
+		//DbgPrint("eRFPath-%d Addr[%02x] = %08x\n", eRFPath, RegAddr, Data);
+		if (BitMask != bRFRegOffsetMask) // RF data is 12 bits only
+		{
+			Original_Value = phy_FwRFSerialRead(dev, eRFPath, RegAddr);
+			BitShift =  phy_CalculateBitShift(BitMask);
+			New_Value = (((Original_Value) & (~BitMask)) | (Data<< BitShift));
+
+			phy_FwRFSerialWrite(dev, eRFPath, RegAddr, New_Value);
+		}
+		else
+			phy_FwRFSerialWrite(dev, eRFPath, RegAddr, Data);
+	}
+	else
+	{
+		//DbgPrint("eRFPath-%d Addr[%02x] = %08x\n", eRFPath, RegAddr, Data);
+		if (BitMask != bRFRegOffsetMask) // RF data is 12 bits only
+		{
+			Original_Value = phy_RFSerialRead(dev, eRFPath, RegAddr);
+			BitShift =  phy_CalculateBitShift(BitMask);
+			New_Value = (((Original_Value) & (~BitMask)) | (Data<< BitShift));
+
+			phy_RFSerialWrite(dev, eRFPath, RegAddr, New_Value);
+		}
+		else
+			phy_RFSerialWrite(dev, eRFPath, RegAddr, Data);
+
+	}
+#endif
+	//PlatformReleaseSpinLock(dev, RT_RF_OPERATE_SPINLOCK);
+	//spin_unlock_irqrestore(&priv->rf_lock, flags);   //YJ,test,090113
+	up(&priv->rf_sem);
+	//RTPRINT(FPHY, PHY_RFW, ("RFW-%d MASK=0x%x Addr[0x%x]=0x%x\n", eRFPath, BitMask, RegAddr, Data));
+	RT_TRACE(COMP_RF, "<---PHY_SetRFReg(): RegAddr(%#x), BitMask(%#x), Data(%#x), eRFPath(%#x)\n",
+			RegAddr, BitMask, Data, eRFPath);
+
+}
+
+#ifdef RTL8192SE
+/*-----------------------------------------------------------------------------
+ * Function:	phy_FwRFSerialRead()
+ *
+ * Overview:	We support firmware to execute RF-R/W.
+ *
+ * Input:		NONE
+ *
+ * Output:		NONE
+ *
+ * Return:		NONE
+ *
+ * Revised History:
+ *	When		Who		Remark
+ *	01/21/2008	MHC		Create Version 0.
+ *
+ *---------------------------------------------------------------------------*/
+//use in phy only
+static	u32
+phy_FwRFSerialRead(
+	struct net_device* dev,
+	RF90_RADIO_PATH_E	eRFPath,
+	u32				Offset	)
+{
+	u32		retValue = 0;
+	//u32		Data = 0;
+	//u8		time = 0;
+#if 0
+	//DbgPrint("FW RF CTRL\n\r");
+	/* 2007/11/02 MH Firmware RF Write control. By Francis' suggestion, we can
+	   not execute the scheme in the initial step. Otherwise, RF-R/W will waste
+	   much time. This is only for site survey. */
+	// 1. Read operation need not insert data. bit 0-11
+	//Data &= bMask12Bits;
+	// 2. Write RF register address. Bit 12-19
+	Data |= ((Offset&0xFF)<<12);
+	// 3. Write RF path.  bit 20-21
+	Data |= ((eRFPath&0x3)<<20);
+	// 4. Set RF read indicator. bit 22=0
+	//Data |= 0x00000;
+	// 5. Trigger Fw to operate the command. bit 31
+	Data |= 0x80000000;
+	// 6. We can not execute read operation if bit 31 is 1.
+	while (PlatformIORead4Byte(dev, QPNR)&0x80000000)
+	{
+		// If FW can not finish RF-R/W for more than ?? times. We must reset FW.
+		if (time++ < 100)
+		{
+			//DbgPrint("FW not finish RF-R Time=%d\n\r", time);
+			delay_us(10);
+		}
+		else
+			break;
+	}
+	// 7. Execute read operation.
+	PlatformIOWrite4Byte(dev, QPNR, Data);
+	// 8. Check if firmawre send back RF content.
+	while (PlatformIORead4Byte(dev, QPNR)&0x80000000)
+	{
+		// If FW can not finish RF-R/W for more than ?? times. We must reset FW.
+		if (time++ < 100)
+		{
+			//DbgPrint("FW not finish RF-W Time=%d\n\r", time);
+			delay_us(10);
+		}
+		else
+			return	(0);
+	}
+	retValue = PlatformIORead4Byte(dev, RF_DATA);
+#endif
+	return	(retValue);
+
+}	/* phy_FwRFSerialRead */
+
+/*-----------------------------------------------------------------------------
+ * Function:	phy_FwRFSerialWrite()
+ *
+ * Overview:	We support firmware to execute RF-R/W.
+ *
+ * Input:		NONE
+ *
+ * Output:		NONE
+ *
+ * Return:		NONE
+ *
+ * Revised History:
+ *	When		Who		Remark
+ *	01/21/2008	MHC		Create Version 0.
+ *
+ *---------------------------------------------------------------------------*/
+//use in phy only
+static	void
+phy_FwRFSerialWrite(
+	struct net_device* dev,
+	RF90_RADIO_PATH_E	eRFPath,
+	u32				Offset,
+	u32				Data	)
+{
+#if 0
+	u8	time = 0;
+	DbgPrint("N FW RF CTRL RF-%d OF%02x DATA=%03x\n\r", eRFPath, Offset, Data);
+	/* 2007/11/02 MH Firmware RF Write control. By Francis' suggestion, we can
+	   not execute the scheme in the initial step. Otherwise, RF-R/W will waste
+	   much time. This is only for site survey. */
+
+	// 1. Set driver write bit and 12 bit data. bit 0-11
+	//Data &= bMask12Bits;	// Done by uper layer.
+	// 2. Write RF register address. bit 12-19
+	Data |= ((Offset&0xFF)<<12);
+	// 3. Write RF path.  bit 20-21
+	Data |= ((eRFPath&0x3)<<20);
+	// 4. Set RF write indicator. bit 22=1
+	Data |= 0x400000;
+	// 5. Trigger Fw to operate the command. bit 31=1
+	Data |= 0x80000000;
+
+	// 6. Write operation. We can not write if bit 31 is 1.
+	while (PlatformIORead4Byte(dev, QPNR)&0x80000000)
+	{
+		// If FW can not finish RF-R/W for more than ?? times. We must reset FW.
+		if (time++ < 100)
+		{
+			//DbgPrint("FW not finish RF-W Time=%d\n\r", time);
+			delay_us(10);
+		}
+		else
+			break;
+	}
+	// 7. No matter check bit. We always force the write. Because FW will
+	//    not accept the command.
+	PlatformIOWrite4Byte(dev, QPNR, Data);
+	/* 2007/11/02 MH Acoording to test, we must delay 20us to wait firmware
+	   to finish RF write operation. */
+	/* 2008/01/17 MH We support delay in firmware side now. */
+	//delay_us(20);
+#endif
+}	/* phy_FwRFSerialWrite */
+
+/**
+* Function:	phy_RFSerialRead
+*
+* OverView:	Read regster from RF chips
+*
+* Input:
+*			PADAPTER		Adapter,
+*			RF90_RADIO_PATH_E	eRFPath,	//Radio path of A/B/C/D
+*			u32			Offset,		//The target address to be read
+*
+* Output:	None
+* Return:		u32			reback value
+* Note:		Threre are three types of serial operations:
+*			1. Software serial write
+*			2. Hardware LSSI-Low Speed Serial Interface
+*			3. Hardware HSSI-High speed
+*			serial write. Driver need to implement (1) and (2).
+*			This function is equal to the combination of RF_ReadReg() and  RFLSSIRead()
+*/
+//use in phy only
+static u32 phy_RFSerialRead(struct net_device* dev,RF90_RADIO_PATH_E eRFPath,u32 Offset)
+{
+
+	u32						retValue = 0;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	BB_REGISTER_DEFINITION_T	*pPhyReg = &priv->PHYRegDef[eRFPath];
+	u32						NewOffset;
+	u8						RfPiEnable=0;
+
+
+	//
+	// Make sure RF register offset is correct
+	//
+	Offset &= 0x3f;
+
+	//
+	// Switch page for 8256 RF IC
+	//
+	if(	priv->rf_chip == RF_8256 ||
+		priv->rf_chip == RF_8225 ||
+		priv->rf_chip == RF_6052)
+	{
+		//analog to digital off, for protection
+		rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, 0x0);// 0x88c[11:8]
+
+		if(Offset>=31)
+		{
+			priv->RFReadPageCnt[2]++;//cosa add for debug
+			priv->RfReg0Value[eRFPath] |= 0x140;
+
+			// Switch to Reg_Mode2 for Reg31~45
+			rtl8192_setBBreg(dev,
+				pPhyReg->rf3wireOffset,
+				bMaskDWord,
+				(priv->RfReg0Value[eRFPath] << 16)	);
+
+			// Modified Offset
+			NewOffset = Offset - 30;
+
+		}else if(Offset>=16)
+		{
+			priv->RFReadPageCnt[1]++;//cosa add for debug
+			priv->RfReg0Value[eRFPath] |= 0x100;
+			priv->RfReg0Value[eRFPath] &= (~0x40);
+
+			// Switch to Reg_Mode1 for Reg16~30
+			rtl8192_setBBreg(dev,
+				pPhyReg->rf3wireOffset,
+				bMaskDWord,
+				(priv->RfReg0Value[eRFPath] << 16)	);
+
+			// Modified Offset
+			NewOffset = Offset - 15;
+		}
+		else
+		{
+			priv->RFReadPageCnt[0]++;//cosa add for debug
+			NewOffset = Offset;
+	}
+	}
+	else
+		NewOffset = Offset;
+
+	//
+	// Put desired read address to LSSI control register
+	//
+	rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadAddress, NewOffset);
+
+	//
+	// Issue a posedge trigger
+	//
+	rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2,  bLSSIReadEdge, 0x0);
+	rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2,  bLSSIReadEdge, 0x1);
+
+	// TODO: we should not delay such a  long time. Ask help from SD3
+	mdelay(1);
+
+	retValue = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData);
+
+	// Switch back to Reg_Mode0;
+	if(	priv->rf_chip == RF_8256 ||
+		priv->rf_chip == RF_8225 ||
+		priv->rf_chip == RF_0222D)
+	{
+		if (Offset >= 0x10)
+		{
+			priv->RfReg0Value[eRFPath] &= 0xebf;
+
+			rtl8192_setBBreg(
+				dev,
+				pPhyReg->rf3wireOffset,
+				bMaskDWord,
+				(priv->RfReg0Value[eRFPath] << 16)	);
+		}
+
+		//analog to digital on
+		rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, 0xf);// 0x88c[11:8]
+	}
+
+	return retValue;
+}
+
+
+
+/**
+* Function:	phy_RFSerialWrite
+*
+* OverView:	Write data to RF register (page 8~)
+*
+* Input:
+*			PADAPTER		Adapter,
+*			RF90_RADIO_PATH_E	eRFPath,	//Radio path of A/B/C/D
+*			u32			Offset,		//The target address to be read
+*			u32			Data			//The new register Data in the target bit position
+*										//of the target to be read
+*
+* Output:	None
+* Return:		None
+* Note:		Threre are three types of serial operations:
+*			1. Software serial write
+*			2. Hardware LSSI-Low Speed Serial Interface
+*			3. Hardware HSSI-High speed
+*			serial write. Driver need to implement (1) and (2).
+*			This function is equal to the combination of RF_ReadReg() and  RFLSSIRead()
+ *
+ * Note: 		  For RF8256 only
+ *			 The total count of RTL8256(Zebra4) register is around 36 bit it only employs
+ *			 4-bit RF address. RTL8256 uses "register mode control bit" (Reg00[12], Reg00[10])
+ *			 to access register address bigger than 0xf. See "Appendix-4 in PHY Configuration
+ *			 programming guide" for more details.
+ *			 Thus, we define a sub-finction for RTL8526 register address conversion
+ *		       ===========================================================
+ *			 Register Mode		RegCTL[1]		RegCTL[0]		Note
+ *								(Reg00[12])		(Reg00[10])
+ *		       ===========================================================
+ *			 Reg_Mode0				0				x			Reg 0 ~15(0x0 ~ 0xf)
+ *		       ------------------------------------------------------------------
+ *			 Reg_Mode1				1				0			Reg 16 ~30(0x1 ~ 0xf)
+ *		       ------------------------------------------------------------------
+ *			 Reg_Mode2				1				1			Reg 31 ~ 45(0x1 ~ 0xf)
+ *		       ------------------------------------------------------------------
+*/
+////use in phy only
+static void
+phy_RFSerialWrite(
+	struct net_device* dev,
+	RF90_RADIO_PATH_E	eRFPath,
+	u32				Offset,
+	u32				Data
+	)
+{
+	u32					DataAndAddr = 0;
+	struct r8192_priv 			*priv = ieee80211_priv(dev);
+	BB_REGISTER_DEFINITION_T	*pPhyReg = &priv->PHYRegDef[eRFPath];
+	u32					NewOffset;
+
+	Offset &= 0x3f;
+
+	// Shadow Update
+	PHY_RFShadowWrite(dev, eRFPath, Offset, Data);
+
+
+	// Switch page for 8256 RF IC
+	if( 	priv->rf_chip == RF_8256 ||
+		priv->rf_chip == RF_8225 ||
+		priv->rf_chip == RF_0222D)
+	{
+		//analog to digital off, for protection
+		rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, 0x0);// 0x88c[11:8]
+
+		if(Offset>=31)
+		{
+			priv->RFWritePageCnt[2]++;//cosa add for debug
+			priv->RfReg0Value[eRFPath] |= 0x140;
+
+			rtl8192_setBBreg(dev,
+				pPhyReg->rf3wireOffset,
+				bMaskDWord,
+				(priv->RfReg0Value[eRFPath] << 16)	);
+
+			NewOffset = Offset - 30;
+
+		}else if(Offset>=16)
+		{
+			priv->RFWritePageCnt[1]++;//cosa add for debug
+			priv->RfReg0Value[eRFPath] |= 0x100;
+			priv->RfReg0Value[eRFPath] &= (~0x40);
+
+
+			rtl8192_setBBreg(dev,
+				pPhyReg->rf3wireOffset,
+				bMaskDWord,
+				(priv->RfReg0Value[eRFPath] << 16)	);
+
+			NewOffset = Offset - 15;
+		}
+		else
+		{
+			priv->RFWritePageCnt[0]++;//cosa add for debug
+			NewOffset = Offset;
+	}
+	}
+	else
+		NewOffset = Offset;
+
+	//
+	// Put write addr in [5:0]  and write data in [31:16]
+	//
+	DataAndAddr = (Data<<16) | (NewOffset&0x3f);
+
+	//
+	// Write Operation
+	//
+	rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, DataAndAddr);
+
+
+	if(Offset==0x0)
+		priv->RfReg0Value[eRFPath] = Data;
+
+	// Switch back to Reg_Mode0;
+ 	if(	priv->rf_chip == RF_8256 ||
+		priv->rf_chip == RF_8225 ||
+		priv->rf_chip == RF_0222D)
+	{
+		if (Offset >= 0x10)
+		{
+			if(Offset != 0)
+			{
+				priv->RfReg0Value[eRFPath] &= 0xebf;
+				rtl8192_setBBreg(
+				dev,
+				pPhyReg->rf3wireOffset,
+				bMaskDWord,
+				(priv->RfReg0Value[eRFPath] << 16)	);
+			}
+		}
+		//analog to digital on
+		rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, 0xf);// 0x88c[11:8]
+	}
+
+}
+#else
+/**
+* Function:	phy_RFSerialRead
+*
+* OverView:	Read regster from RF chips
+*
+* Input:
+*			PADAPTER		Adapter,
+*			RF90_RADIO_PATH_E	eRFPath,	//Radio path of A/B/C/D
+*			u4Byte			Offset,		//The target address to be read
+*
+* Output:	None
+* Return:		u4Byte			reback value
+* Note:		Threre are three types of serial operations:
+*			1. Software serial write
+*			2. Hardware LSSI-Low Speed Serial Interface
+*			3. Hardware HSSI-High speed
+*			serial write. Driver need to implement (1) and (2).
+*			This function is equal to the combination of RF_ReadReg() and  RFLSSIRead()
+*/
+#if 0
+static	u32
+phy_RFSerialRead(struct net_device* dev,RF90_RADIO_PATH_E eRFPath,u32 Offset)
+{
+
+	u32						retValue = 0;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	BB_REGISTER_DEFINITION_T	*pPhyReg = &priv->PHYRegDef[eRFPath];
+	u32						NewOffset;
+	//u32						value  = 0;
+	u32 						tmplong,tmplong2;
+	u32						RfPiEnable=0;
+#if 0
+	if(pHalData->RFChipID == RF_8225 && Offset > 0x24) //36 valid regs
+		return	retValue;
+	if(pHalData->RFChipID == RF_8256 && Offset > 0x2D) //45 valid regs
+		return	retValue;
+#endif
+	//
+	// Make sure RF register offset is correct
+	//
+	Offset &= 0x3f;
+
+	//
+	// Switch page for 8256 RF IC
+	//
+	NewOffset = Offset;
+
+	// For 92S LSSI Read RFLSSIRead
+	// For RF A/B write 0x824/82c(does not work in the future)
+	// We must use 0x824 for RF A and B to execute read trigger
+	tmplong = rtl8192_QueryBBReg(dev, rFPGA0_XA_HSSIParameter2, bMaskDWord);
+	tmplong2 = rtl8192_QueryBBReg(dev, pPhyReg->rfHSSIPara2, bMaskDWord);
+	tmplong2 = (tmplong2 & (~bLSSIReadAddress)) | (NewOffset<<23) | bLSSIReadEdge;	//T65 RF
+
+	rtl8192_setBBreg(dev, rFPGA0_XA_HSSIParameter2, bMaskDWord, tmplong&(~bLSSIReadEdge));
+	mdelay(1);
+
+	rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bMaskDWord, tmplong2);
+	mdelay(1);
+
+	rtl8192_setBBreg(dev, rFPGA0_XA_HSSIParameter2, bMaskDWord, tmplong|bLSSIReadEdge);
+	mdelay(1);
+
+	if(eRFPath == RF90_PATH_A)
+		RfPiEnable = (u8)rtl8192_QueryBBReg(dev, rFPGA0_XA_HSSIParameter1, BIT8);
+	else if(eRFPath == RF90_PATH_B)
+		RfPiEnable = (u8)rtl8192_QueryBBReg(dev, rFPGA0_XB_HSSIParameter1, BIT8);
+
+	if(RfPiEnable)
+	{	// Read from BBreg8b8, 12 bits for 8190, 20bits for T65 RF
+		retValue = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBackPi, bLSSIReadBackData);
+		//DbgPrint("Readback from RF-PI : 0x%x\n", retValue);
+	}
+	else
+	{	//Read from BBreg8a0, 12 bits for 8190, 20 bits for T65 RF
+		retValue = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData);
+		//DbgPrint("Readback from RF-SI : 0x%x\n", retValue);
+	}
+	//RTPRINT(FPHY, PHY_RFR, ("RFR-%d Addr[0x%x]=0x%x\n", eRFPath, pPhyReg->rfLSSIReadBack, retValue));
+
+	return retValue;
+
+}
+4
+
+
+/**
+* Function:	phy_RFSerialWrite
+*
+* OverView:	Write data to RF register (page 8~)
+*
+* Input:
+*			PADAPTER		Adapter,
+*			RF90_RADIO_PATH_E	eRFPath,	//Radio path of A/B/C/D
+*			u4Byte			Offset,		//The target address to be read
+*			u4Byte			Data			//The new register Data in the target bit position
+*										//of the target to be read
+*
+* Output:	None
+* Return:		None
+* Note:		Threre are three types of serial operations:
+*			1. Software serial write
+*			2. Hardware LSSI-Low Speed Serial Interface
+*			3. Hardware HSSI-High speed
+*			serial write. Driver need to implement (1) and (2).
+*			This function is equal to the combination of RF_ReadReg() and  RFLSSIRead()
+ *
+ * Note: 		  For RF8256 only
+ *			 The total count of RTL8256(Zebra4) register is around 36 bit it only employs
+ *			 4-bit RF address. RTL8256 uses "register mode control bit" (Reg00[12], Reg00[10])
+ *			 to access register address bigger than 0xf. See "Appendix-4 in PHY Configuration
+ *			 programming guide" for more details.
+ *			 Thus, we define a sub-finction for RTL8526 register address conversion
+ *		       ===========================================================
+ *			 Register Mode		RegCTL[1]		RegCTL[0]		Note
+ *								(Reg00[12])		(Reg00[10])
+ *		       ===========================================================
+ *			 Reg_Mode0				0				x			Reg 0 ~15(0x0 ~ 0xf)
+ *		       ------------------------------------------------------------------
+ *			 Reg_Mode1				1				0			Reg 16 ~30(0x1 ~ 0xf)
+ *		       ------------------------------------------------------------------
+ *			 Reg_Mode2				1				1			Reg 31 ~ 45(0x1 ~ 0xf)
+ *		       ------------------------------------------------------------------
+ *
+ *	2008/09/02	MH	Add 92S RF definition
+ *
+ *
+ *
+*/
+static	void
+phy_RFSerialWrite(struct net_device* dev,RF90_RADIO_PATH_E eRFPath,u32 Offset,u32	Data)
+{
+	u32						DataAndAddr = 0;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	BB_REGISTER_DEFINITION_T	*pPhyReg = &priv->PHYRegDef[eRFPath];
+	u32						NewOffset;
+
+#if 0
+	//<Roger_TODO> We should check valid regs for RF_6052 case.
+	if(pHalData->RFChipID == RF_8225 && Offset > 0x24) //36 valid regs
+		return;
+	if(pHalData->RFChipID == RF_8256 && Offset > 0x2D) //45 valid regs
+		return;
+#endif
+
+	Offset &= 0x3f;
+
+	//
+	// Shadow Update
+	//
+	PHY_RFShadowWrite(dev, eRFPath, Offset, Data);
+
+	//
+	// Switch page for 8256 RF IC
+	//
+		NewOffset = Offset;
+
+	//
+	// Put write addr in [5:0]  and write data in [31:16]
+	//
+	//DataAndAddr = (Data<<16) | (NewOffset&0x3f);
+	DataAndAddr = ((NewOffset<<20) | (Data&0x000fffff)) & 0x0fffffff;	// T65 RF
+
+	//
+	// Write Operation
+	//
+	rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, DataAndAddr);
+	//RTPRINT(FPHY, PHY_RFW, ("RFW-%d Addr[0x%x]=0x%x\n", eRFPath, pPhyReg->rf3wireOffset, DataAndAddr));
+
+}
+#endif
+#endif
+
+/**
+* Function:	phy_CalculateBitShift
+*
+* OverView:	Get shifted position of the BitMask
+*
+* Input:
+*			u32		BitMask,
+*
+* Output:	none
+* Return:		u32		Return the shift bit bit position of the mask
+*/
+//use in phy only
+static u32 phy_CalculateBitShift(u32 BitMask)
+{
+	u32 i;
+
+	for(i=0; i<=31; i++)
+	{
+		if ( ((BitMask>>i) &  0x1 ) == 1)
+			break;
+	}
+
+	return (i);
+}
+
+
+//
+// 3. Initial MAC/BB/RF config by reading MAC/BB/RF txt.
+//
+/*-----------------------------------------------------------------------------
+ * Function:    PHY_MACConfig8192S
+ *
+ * Overview:	Condig MAC by header file or parameter file.
+ *
+ * Input:       NONE
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ *  When		Who		Remark
+ *  08/12/2008	MHC		Create Version 0.
+ *
+ *---------------------------------------------------------------------------*/
+//adapter_start
+extern bool PHY_MACConfig8192S(struct net_device* dev)
+{
+	RT_STATUS		rtStatus = RT_STATUS_SUCCESS;
+
+	//
+	// Config MAC
+	//
+#if RTL8190_Download_Firmware_From_Header
+	rtStatus = phy_ConfigMACWithHeaderFile(dev);
+#else
+	// Not make sure EEPROM, add later
+	RT_TRACE(COMP_INIT, "Read MACREG.txt\n");
+	//rtStatus = phy_ConfigMACWithParaFile(dev, RTL819X_PHY_MACREG);// lzm del it temp
+#endif
+	return (rtStatus == RT_STATUS_SUCCESS) ? true:false;
+
+}
+
+//adapter_start
+extern	bool
+PHY_BBConfig8192S(struct net_device* dev)
+{
+	RT_STATUS	rtStatus = RT_STATUS_SUCCESS;
+
+	u8 PathMap = 0, index = 0, rf_num = 0;
+	struct r8192_priv 	*priv = ieee80211_priv(dev);
+	phy_InitBBRFRegisterDefinition(dev);
+
+	//
+	// Config BB and AGC
+	//
+	//switch( Adapter->MgntInfo.bRegHwParaFile )
+	//{
+	//	case 0:
+	//		phy_BB8190_Config_HardCode(dev);
+	//		break;
+
+	//	case 1:
+			rtStatus = phy_BB8192S_Config_ParaFile(dev);
+	//		break;
+
+	//	case 2:
+			// Partial Modify.
+	//		phy_BB8190_Config_HardCode(dev);
+	//		phy_BB8192S_Config_ParaFile(dev);
+	//		break;
+
+	//	default:
+	//		phy_BB8190_Config_HardCode(dev);
+	//		break;
+	//}
+	PathMap = (u8)(rtl8192_QueryBBReg(dev, rFPGA0_TxInfo, 0xf) |
+				rtl8192_QueryBBReg(dev, rOFDM0_TRxPathEnable, 0xf));
+	priv->rf_pathmap = PathMap;
+	for(index = 0; index<4; index++)
+	{
+		if((PathMap>>index)&0x1)
+			rf_num++;
+	}
+
+	if((priv->rf_type==RF_1T1R && rf_num!=1) ||
+		(priv->rf_type==RF_1T2R && rf_num!=2) ||
+		(priv->rf_type==RF_2T2R && rf_num!=2) ||
+		(priv->rf_type==RF_2T2R_GREEN && rf_num!=2) ||
+		(priv->rf_type==RF_2T4R && rf_num!=4))
+	{
+		RT_TRACE( COMP_INIT, "PHY_BBConfig8192S: RF_Type(%x) does not match RF_Num(%x)!!\n", priv->rf_type, rf_num);
+	}
+	return (rtStatus == RT_STATUS_SUCCESS) ? 1:0;
+}
+
+//adapter_start
+extern	bool
+PHY_RFConfig8192S(struct net_device* dev)
+{
+	struct r8192_priv 	*priv = ieee80211_priv(dev);
+	RT_STATUS    		rtStatus = RT_STATUS_SUCCESS;
+
+	//Set priv->rf_chip = RF_8225 to do real PHY FPGA initilization
+
+	//<Roger_EXP> We assign RF type here temporally. 2008.09.12.
+	priv->rf_chip = RF_6052;
+
+	//
+	// RF config
+	//
+	switch(priv->rf_chip)
+	{
+	case RF_8225:
+	case RF_6052:
+		rtStatus = PHY_RF6052_Config(dev);
+		break;
+
+	case RF_8256:
+		//rtStatus = PHY_RF8256_Config(dev);
+		break;
+
+	case RF_8258:
+		break;
+
+	case RF_PSEUDO_11N:
+		//rtStatus = PHY_RF8225_Config(dev);
+		break;
+        default:
+            break;
+	}
+
+	return (rtStatus == RT_STATUS_SUCCESS) ? 1:0;
+}
+
+
+// Joseph test: new initialize order!!
+// Test only!! This part need to be re-organized.
+// Now it is just for 8256.
+//use in phy only
+#ifdef TO_DO_LIST
+static RT_STATUS
+phy_BB8190_Config_HardCode(struct net_device* dev)
+{
+	//RT_ASSERT(FALSE, ("This function is not implement yet!! \n"));
+	return RT_STATUS_SUCCESS;
+}
+#endif
+
+/*-----------------------------------------------------------------------------
+ * Function:    phy_SetBBtoDiffRFWithHeaderFile()
+ *
+ * Overview:    This function
+ *
+ *
+ * Input:      	PADAPTER		Adapter
+ *			u1Byte 			ConfigType     0 => PHY_CONFIG
+ *
+ * Output:      NONE
+ *
+ * Return:      RT_STATUS_SUCCESS: configuration file exist
+ * When			Who		Remark
+ * 2008/11/10	tynli
+ * use in phy only
+ *---------------------------------------------------------------------------*/
+static RT_STATUS
+phy_SetBBtoDiffRFWithHeaderFile(struct net_device* dev, u8 ConfigType)
+{
+	int i;
+	struct r8192_priv 	*priv = ieee80211_priv(dev);
+	u32* 			Rtl819XPHY_REGArraytoXTXR_Table;
+	u16				PHY_REGArraytoXTXRLen;
+
+//#if (HAL_CODE_BASE != RTL8192_S)
+
+	if(priv->rf_type == RF_1T1R)
+	{
+		Rtl819XPHY_REGArraytoXTXR_Table = Rtl819XPHY_REG_to1T1R_Array;
+		PHY_REGArraytoXTXRLen = PHY_ChangeTo_1T1RArrayLength;
+	}
+	else if(priv->rf_type == RF_1T2R)
+	{
+		Rtl819XPHY_REGArraytoXTXR_Table = Rtl819XPHY_REG_to1T2R_Array;
+		PHY_REGArraytoXTXRLen = PHY_ChangeTo_1T2RArrayLength;
+	}
+	//else if(priv->rf_type == RF_2T2R || priv->rf_type == RF_2T2R_GREEN)
+	//{
+	//	Rtl819XPHY_REGArraytoXTXR_Table = Rtl819XPHY_REG_to2T2R_Array;
+	//	PHY_REGArraytoXTXRLen = PHY_ChangeTo_2T2RArrayLength;
+	//}
+	else
+	{
+		return RT_STATUS_FAILURE;
+	}
+
+	if(ConfigType == BaseBand_Config_PHY_REG)
+	{
+		for(i=0;i<PHY_REGArraytoXTXRLen;i=i+3)
+		{
+			if (Rtl819XPHY_REGArraytoXTXR_Table[i] == 0xfe)
+				mdelay(50);
+			else if (Rtl819XPHY_REGArraytoXTXR_Table[i] == 0xfd)
+				mdelay(5);
+			else if (Rtl819XPHY_REGArraytoXTXR_Table[i] == 0xfc)
+				mdelay(1);
+			else if (Rtl819XPHY_REGArraytoXTXR_Table[i] == 0xfb)
+				udelay(50);
+			else if (Rtl819XPHY_REGArraytoXTXR_Table[i] == 0xfa)
+				udelay(5);
+			else if (Rtl819XPHY_REGArraytoXTXR_Table[i] == 0xf9)
+				udelay(1);
+			rtl8192_setBBreg(dev, Rtl819XPHY_REGArraytoXTXR_Table[i], Rtl819XPHY_REGArraytoXTXR_Table[i+1], Rtl819XPHY_REGArraytoXTXR_Table[i+2]);
+			//RT_TRACE(COMP_SEND,
+			//"The Rtl819XPHY_REGArraytoXTXR_Table[0] is %lx Rtl819XPHY_REGArraytoXTXR_Table[1] is %lx Rtl819XPHY_REGArraytoXTXR_Table[2] is %lx \n",
+			//Rtl819XPHY_REGArraytoXTXR_Table[i],Rtl819XPHY_REGArraytoXTXR_Table[i+1], Rtl819XPHY_REGArraytoXTXR_Table[i+2]);
+		}
+	}
+	else {
+		RT_TRACE(COMP_SEND, "phy_SetBBtoDiffRFWithHeaderFile(): ConfigType != BaseBand_Config_PHY_REG\n");
+	}
+//#endif	// #if (HAL_CODE_BASE != RTL8192_S)
+	return RT_STATUS_SUCCESS;
+}
+
+
+//use in phy only
+static	RT_STATUS
+phy_BB8192S_Config_ParaFile(struct net_device* dev)
+{
+	struct r8192_priv 	*priv = ieee80211_priv(dev);
+	RT_STATUS			rtStatus = RT_STATUS_SUCCESS;
+	//u8				u2RegValue;
+	//u16				u4RegValue;
+	//char				szBBRegFile[] = RTL819X_PHY_REG;
+	//char				szBBRegFile1T2R[] = RTL819X_PHY_REG_1T2R;
+	//char				szBBRegPgFile[] = RTL819X_PHY_REG_PG;
+	//char				szAGCTableFile[] = RTL819X_AGC_TAB;
+	//char				szBBRegto1T1RFile[] = RTL819X_PHY_REG_to1T1R;
+	//char				szBBRegto1T2RFile[] = RTL819X_PHY_REG_to1T2R;
+
+	RT_TRACE(COMP_INIT, "==>phy_BB8192S_Config_ParaFile\n");
+
+	//
+	// 1. Read PHY_REG.TXT BB INIT!!
+	// We will seperate as 1T1R/1T2R/1T2R_GREEN/2T2R
+	//
+#if RTL8190_Download_Firmware_From_Header
+	if (priv->rf_type == RF_1T2R || priv->rf_type == RF_2T2R ||
+	    priv->rf_type == RF_1T1R ||priv->rf_type == RF_2T2R_GREEN)
+	{
+		rtStatus = phy_ConfigBBWithHeaderFile(dev,BaseBand_Config_PHY_REG);
+		if(priv->rf_type != RF_2T2R && priv->rf_type != RF_2T2R_GREEN)
+		{//2008.11.10 Added by tynli. The default PHY_REG.txt we read is for 2T2R,
+		  //so we should reconfig BB reg with the right PHY parameters.
+			rtStatus = phy_SetBBtoDiffRFWithHeaderFile(dev,BaseBand_Config_PHY_REG);
+		}
+	}else
+		rtStatus = RT_STATUS_FAILURE;
+#else
+	RT_TRACE(COMP_INIT, "RF_Type == %d\n", priv->rf_type);
+	// No matter what kind of RF we always read PHY_REG.txt. We must copy different
+	// type of parameter files to phy_reg.txt at first.
+	if (priv->rf_type == RF_1T2R || priv->rf_type == RF_2T2R ||
+	    priv->rf_type == RF_1T1R ||priv->rf_type == RF_2T2R_GREEN)
+	{
+		rtStatus = phy_ConfigBBWithParaFile(dev, (char* )&szBBRegFile);
+		if(priv->rf_type != RF_2T2R && priv->rf_type != RF_2T2R_GREEN)
+		{//2008.11.10 Added by tynli. The default PHY_REG.txt we read is for 2T2R,
+		  //so we should reconfig BB reg with the right PHY parameters.
+			if(priv->rf_type == RF_1T1R)
+				rtStatus = phy_SetBBtoDiffRFWithParaFile(dev, (char* )&szBBRegto1T1RFile);
+			else if(priv->rf_type == RF_1T2R)
+				rtStatus = phy_SetBBtoDiffRFWithParaFile(dev, (char* )&szBBRegto1T2RFile);
+		}
+
+	}else
+		rtStatus = RT_STATUS_FAILURE;
+#endif
+
+	if(rtStatus != RT_STATUS_SUCCESS){
+		RT_TRACE(COMP_INIT, "phy_BB8192S_Config_ParaFile():Write BB Reg Fail!!");
+		goto phy_BB8190_Config_ParaFile_Fail;
+	}
+
+	//
+	// 2. If EEPROM or EFUSE autoload OK, We must config by PHY_REG_PG.txt
+	//
+	if (priv->AutoloadFailFlag == false)
+	{
+#if	RTL8190_Download_Firmware_From_Header
+		rtStatus = phy_ConfigBBWithPgHeaderFile(dev,BaseBand_Config_PHY_REG);
+#else
+		rtStatus = phy_ConfigBBWithPgParaFile(dev, (char* )&szBBRegPgFile);
+#endif
+	}
+	if(rtStatus != RT_STATUS_SUCCESS){
+		RT_TRACE(COMP_INIT, "phy_BB8192S_Config_ParaFile():BB_PG Reg Fail!!");
+		goto phy_BB8190_Config_ParaFile_Fail;
+	}
+
+	//
+	// 3. BB AGC table Initialization
+	//
+#if RTL8190_Download_Firmware_From_Header
+	rtStatus = phy_ConfigBBWithHeaderFile(dev,BaseBand_Config_AGC_TAB);
+#else
+	RT_TRACE(COMP_INIT, "phy_BB8192S_Config_ParaFile AGC_TAB.txt\n");
+	rtStatus = phy_ConfigBBWithParaFile(Adapter, (char* )&szAGCTableFile);
+#endif
+
+	if(rtStatus != RT_STATUS_SUCCESS){
+		printk( "phy_BB8192S_Config_ParaFile():AGC Table Fail\n");
+		goto phy_BB8190_Config_ParaFile_Fail;
+	}
+
+
+#if 0	// 2008/08/18 MH Disable for 92SE
+	if(pHalData->VersionID > VERSION_8190_BD)
+	{
+		//if(pHalData->RF_Type == RF_2T4R)
+		//{
+		// Antenna gain offset from B/C/D to A
+		u4RegValue = (  pHalData->AntennaTxPwDiff[2]<<8 |
+						pHalData->AntennaTxPwDiff[1]<<4 |
+						pHalData->AntennaTxPwDiff[0]);
+		//}
+		//else
+		//u4RegValue = 0;
+
+		PHY_SetBBReg(dev, rFPGA0_TxGainStage,
+			(bXBTxAGC|bXCTxAGC|bXDTxAGC), u4RegValue);
+
+		// CrystalCap
+		// Simulate 8192???
+		u4RegValue = pHalData->CrystalCap;
+		PHY_SetBBReg(dev, rFPGA0_AnalogParameter1, bXtalCap92x, u4RegValue);
+		// Simulate 8190??
+		//u4RegValue = ((pHalData->CrystalCap & 0xc)>>2);	// bit2~3 of crystal cap
+		//PHY_SetBBReg(Adapter, rFPGA0_AnalogParameter2, bXtalCap23, u4RegValue);
+
+	}
+#endif
+
+	// Check if the CCK HighPower is turned ON.
+	// This is used to calculate PWDB.
+	priv->bCckHighPower = (bool)(rtl8192_QueryBBReg(dev, rFPGA0_XA_HSSIParameter2, 0x200));
+
+
+phy_BB8190_Config_ParaFile_Fail:
+	return rtStatus;
+}
+
+/*-----------------------------------------------------------------------------
+ * Function:    phy_ConfigMACWithHeaderFile()
+ *
+ * Overview:    This function read BB parameters from Header file we gen, and do register
+ *			  Read/Write
+ *
+ * Input:      	PADAPTER		Adapter
+ *			char* 			pFileName
+ *
+ * Output:      NONE
+ *
+ * Return:      RT_STATUS_SUCCESS: configuration file exist
+ *
+ * Note: 		The format of MACPHY_REG.txt is different from PHY and RF.
+ *			[Register][Mask][Value]
+ *---------------------------------------------------------------------------*/
+//use in phy only
+static	RT_STATUS
+phy_ConfigMACWithHeaderFile(struct net_device* dev)
+{
+	u32					i = 0;
+	u32					ArrayLength = 0;
+	u32*					ptrArray;
+	//struct r8192_priv 	*priv = ieee80211_priv(dev);
+
+//#if (HAL_CODE_BASE != RTL8192_S)
+	/*if(Adapter->bInHctTest)
+	{
+		RT_TRACE(COMP_INIT, DBG_LOUD, ("Rtl819XMACPHY_ArrayDTM\n"));
+		ArrayLength = MACPHY_ArrayLengthDTM;
+		ptrArray = Rtl819XMACPHY_ArrayDTM;
+	}
+	else if(pHalData->bTXPowerDataReadFromEEPORM)
+	{
+//		RT_TRACE(COMP_INIT, DBG_LOUD, ("Rtl819XMACPHY_Array_PG\n"));
+//		ArrayLength = MACPHY_Array_PGLength;
+//		ptrArray = Rtl819XMACPHY_Array_PG;
+
+	}else*/
+	{ //2008.11.06 Modified by tynli.
+		RT_TRACE(COMP_INIT, "Read Rtl819XMACPHY_Array\n");
+		ArrayLength = MAC_2T_ArrayLength;
+		ptrArray = Rtl819XMAC_Array;
+	}
+
+	/*for(i = 0 ;i < ArrayLength;i=i+3){
+		RT_TRACE(COMP_SEND, DBG_LOUD, ("The Rtl819XMACPHY_Array[0] is %lx Rtl819XMACPHY_Array[1] is %lx Rtl819XMACPHY_Array[2] is %lx\n",ptrArray[i], ptrArray[i+1], ptrArray[i+2]));
+		if(ptrArray[i] == 0x318)
+		{
+			ptrArray[i+2] = 0x00000800;
+			//DbgPrint("ptrArray[i], ptrArray[i+1], ptrArray[i+2] = %x, %x, %x\n",
+			//	ptrArray[i], ptrArray[i+1], ptrArray[i+2]);
+		}
+		PHY_SetBBReg(Adapter, ptrArray[i], ptrArray[i+1], ptrArray[i+2]);
+	}*/
+	for(i = 0 ;i < ArrayLength;i=i+2){ // Add by tynli for 2 column
+		write_nic_byte(dev, ptrArray[i], (u8)ptrArray[i+1]);
+	}
+//#endif
+	return RT_STATUS_SUCCESS;
+}
+
+/*-----------------------------------------------------------------------------
+ * Function:    phy_ConfigBBWithHeaderFile()
+ *
+ * Overview:    This function read BB parameters from general file format, and do register
+ *			  Read/Write
+ *
+ * Input:      	PADAPTER		Adapter
+ *			u8 			ConfigType     0 => PHY_CONFIG
+ *										 1 =>AGC_TAB
+ *
+ * Output:      NONE
+ *
+ * Return:      RT_STATUS_SUCCESS: configuration file exist
+ *
+ *---------------------------------------------------------------------------*/
+//use in phy only
+static	RT_STATUS
+phy_ConfigBBWithHeaderFile(struct net_device* dev,u8 ConfigType)
+{
+	int 		i;
+	//u8 		ArrayLength;
+	u32*	Rtl819XPHY_REGArray_Table;
+	u32*	Rtl819XAGCTAB_Array_Table;
+	u16		PHY_REGArrayLen, AGCTAB_ArrayLen;
+	//struct r8192_priv *priv = ieee80211_priv(dev);
+//#if (HAL_CODE_BASE != RTL8192_S)
+	/*if(Adapter->bInHctTest)
+	{
+
+		AGCTAB_ArrayLen = AGCTAB_ArrayLengthDTM;
+		Rtl819XAGCTAB_Array_Table = Rtl819XAGCTAB_ArrayDTM;
+
+		if(pHalData->RF_Type == RF_2T4R)
+		{
+			PHY_REGArrayLen = PHY_REGArrayLengthDTM;
+			Rtl819XPHY_REGArray_Table = Rtl819XPHY_REGArrayDTM;
+		}
+		else if (pHalData->RF_Type == RF_1T2R)
+		{
+			PHY_REGArrayLen = PHY_REG_1T2RArrayLengthDTM;
+			Rtl819XPHY_REGArray_Table = Rtl819XPHY_REG_1T2RArrayDTM;
+		}
+
+	}
+	else
+	*/
+	//{
+	//
+	// 2008.11.06 Modified by tynli.
+	//
+	AGCTAB_ArrayLen = AGCTAB_ArrayLength;
+	Rtl819XAGCTAB_Array_Table = Rtl819XAGCTAB_Array;
+	PHY_REGArrayLen = PHY_REG_2T2RArrayLength; // Default RF_type: 2T2R
+	Rtl819XPHY_REGArray_Table = Rtl819XPHY_REG_Array;
+	//}
+
+	if(ConfigType == BaseBand_Config_PHY_REG)
+	{
+		for(i=0;i<PHY_REGArrayLen;i=i+2)
+		{
+			if (Rtl819XPHY_REGArray_Table[i] == 0xfe)
+				mdelay(50);
+			else if (Rtl819XPHY_REGArray_Table[i] == 0xfd)
+				mdelay(5);
+			else if (Rtl819XPHY_REGArray_Table[i] == 0xfc)
+				mdelay(1);
+			else if (Rtl819XPHY_REGArray_Table[i] == 0xfb)
+				udelay(50);
+			else if (Rtl819XPHY_REGArray_Table[i] == 0xfa)
+				udelay(5);
+			else if (Rtl819XPHY_REGArray_Table[i] == 0xf9)
+				udelay(1);
+			rtl8192_setBBreg(dev, Rtl819XPHY_REGArray_Table[i], bMaskDWord, Rtl819XPHY_REGArray_Table[i+1]);
+			//RT_TRACE(COMP_SEND, "The Rtl819XPHY_REGArray_Table[0] is %lx Rtl819XPHY_REGArray[1] is %lx \n",Rtl819XPHY_REGArray_Table[i], Rtl819XPHY_REGArray_Table[i+1]);
+
+		}
+	}
+	else if(ConfigType == BaseBand_Config_AGC_TAB){
+		for(i=0;i<AGCTAB_ArrayLen;i=i+2)
+		{
+			rtl8192_setBBreg(dev, Rtl819XAGCTAB_Array_Table[i], bMaskDWord, Rtl819XAGCTAB_Array_Table[i+1]);
+		}
+	}
+//#endif	// #if (HAL_CODE_BASE != RTL8192_S)
+	return RT_STATUS_SUCCESS;
+}
+
+/*-----------------------------------------------------------------------------
+ * Function:	phy_ConfigBBWithPgHeaderFile
+ *
+ * Overview:	Config PHY_REG_PG array
+ *
+ * Input:       NONE
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ * When			Who		Remark
+ * 11/06/2008 	MHC		Add later!!!!!!.. Please modify for new files!!!!
+ * 11/10/2008	tynli		Modify to mew files.
+ //use in phy only
+ *---------------------------------------------------------------------------*/
+static RT_STATUS
+phy_ConfigBBWithPgHeaderFile(struct net_device* dev,u8 ConfigType)
+{
+	int i;
+	//u8 ArrayLength;
+	u32*	Rtl819XPHY_REGArray_Table_PG;
+	u16	PHY_REGArrayPGLen;
+	//struct r8192_priv *priv = ieee80211_priv(dev);
+//#if (HAL_CODE_BASE != RTL8192_S)
+	// Default: pHalData->RF_Type = RF_2T2R.
+
+	PHY_REGArrayPGLen = PHY_REG_Array_PGLength;
+	Rtl819XPHY_REGArray_Table_PG = Rtl819XPHY_REG_Array_PG;
+
+	if(ConfigType == BaseBand_Config_PHY_REG)
+	{
+		for(i=0;i<PHY_REGArrayPGLen;i=i+3)
+		{
+			if (Rtl819XPHY_REGArray_Table_PG[i] == 0xfe)
+				mdelay(50);
+			else if (Rtl819XPHY_REGArray_Table_PG[i] == 0xfd)
+				mdelay(5);
+			else if (Rtl819XPHY_REGArray_Table_PG[i] == 0xfc)
+				mdelay(1);
+			else if (Rtl819XPHY_REGArray_Table_PG[i] == 0xfb)
+				udelay(50);
+			else if (Rtl819XPHY_REGArray_Table_PG[i] == 0xfa)
+				udelay(5);
+			else if (Rtl819XPHY_REGArray_Table_PG[i] == 0xf9)
+				udelay(1);
+			rtl8192_setBBreg(dev, Rtl819XPHY_REGArray_Table_PG[i], Rtl819XPHY_REGArray_Table_PG[i+1], Rtl819XPHY_REGArray_Table_PG[i+2]);
+			//RT_TRACE(COMP_SEND, "The Rtl819XPHY_REGArray_Table_PG[0] is %lx Rtl819XPHY_REGArray_Table_PG[1] is %lx \n",
+			//		Rtl819XPHY_REGArray_Table_PG[i], Rtl819XPHY_REGArray_Table_PG[i+1]);
+		}
+	}else{
+		RT_TRACE(COMP_SEND, "phy_ConfigBBWithPgHeaderFile(): ConfigType != BaseBand_Config_PHY_REG\n");
+	}
+	return RT_STATUS_SUCCESS;
+
+}	/* phy_ConfigBBWithPgHeaderFile */
+
+/*-----------------------------------------------------------------------------
+ * Function:    PHY_ConfigRFWithHeaderFile()
+ *
+ * Overview:    This function read RF parameters from general file format, and do RF 3-wire
+ *
+ * Input:      	PADAPTER			Adapter
+ *			char* 				pFileName
+ *			RF90_RADIO_PATH_E	eRFPath
+ *
+ * Output:      NONE
+ *
+ * Return:      RT_STATUS_SUCCESS: configuration file exist
+ *
+ * Note:		Delay may be required for RF configuration
+ *---------------------------------------------------------------------------*/
+//in 8256 phy_RF8256_Config_ParaFile only
+//RT_STATUS PHY_ConfigRFWithHeaderFile(struct net_device* dev,RF90_RADIO_PATH_E eRFPath)
+u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E	eRFPath)
+{
+
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	int			i;
+	//u32*	pRFArray;
+	RT_STATUS	rtStatus = RT_STATUS_SUCCESS;
+	u32			*Rtl819XRadioA_Array_Table;
+	u32			*Rtl819XRadioB_Array_Table;
+	//u32*	Rtl819XRadioC_Array_Table;
+	//u32*	Rtl819XRadioD_Array_Table;
+	u16			RadioA_ArrayLen,RadioB_ArrayLen;
+
+	{	//2008.11.06 Modified by tynli
+		RadioA_ArrayLen = RadioA_1T_ArrayLength;
+		Rtl819XRadioA_Array_Table=Rtl819XRadioA_Array;
+		Rtl819XRadioB_Array_Table=Rtl819XRadioB_Array;
+		RadioB_ArrayLen = RadioB_ArrayLength;
+	}
+
+	if( priv->rf_type == RF_2T2R_GREEN )
+	{
+		Rtl819XRadioB_Array_Table = Rtl819XRadioB_GM_Array;
+		RadioB_ArrayLen = RadioB_GM_ArrayLength;
+	}
+	else
+	{
+		Rtl819XRadioB_Array_Table = Rtl819XRadioB_Array;
+		RadioB_ArrayLen = RadioB_ArrayLength;
+	}
+
+	rtStatus = RT_STATUS_SUCCESS;
+
+	// When initialization, we want the delay function(mdelay(), delay_us()
+	// ==> actually we call PlatformStallExecution()) to do NdisStallExecution()
+	// [busy wait] instead of NdisMSleep(). So we acquire RT_INITIAL_SPINLOCK
+	// to run at Dispatch level to achive it.
+	//cosa PlatformAcquireSpinLock(Adapter, RT_INITIAL_SPINLOCK);
+
+	switch(eRFPath){
+		case RF90_PATH_A:
+			for(i = 0;i<RadioA_ArrayLen; i=i+2){
+				if(Rtl819XRadioA_Array_Table[i] == 0xfe)
+					{ // Deay specific ms. Only RF configuration require delay.
+//#if (DEV_BUS_TYPE == USB_INTERFACE)
+#ifdef RTL8192SU
+						mdelay(1000);
+#else
+						mdelay(50);
+#endif
+				}
+					else if (Rtl819XRadioA_Array_Table[i] == 0xfd)
+						mdelay(5);
+					else if (Rtl819XRadioA_Array_Table[i] == 0xfc)
+						mdelay(1);
+					else if (Rtl819XRadioA_Array_Table[i] == 0xfb)
+						udelay(50);
+						//PlatformStallExecution(50);
+					else if (Rtl819XRadioA_Array_Table[i] == 0xfa)
+						udelay(5);
+					else if (Rtl819XRadioA_Array_Table[i] == 0xf9)
+						udelay(1);
+					else
+					{
+					rtl8192_phy_SetRFReg(dev, eRFPath, Rtl819XRadioA_Array_Table[i], bRFRegOffsetMask, Rtl819XRadioA_Array_Table[i+1]);
+					}
+			}
+			break;
+		case RF90_PATH_B:
+			for(i = 0;i<RadioB_ArrayLen; i=i+2){
+				if(Rtl819XRadioB_Array_Table[i] == 0xfe)
+					{ // Deay specific ms. Only RF configuration require delay.
+//#if (DEV_BUS_TYPE == USB_INTERFACE)
+#ifdef RTL8192SU
+						mdelay(1000);
+#else
+						mdelay(50);
+#endif
+				}
+					else if (Rtl819XRadioB_Array_Table[i] == 0xfd)
+						mdelay(5);
+					else if (Rtl819XRadioB_Array_Table[i] == 0xfc)
+						mdelay(1);
+					else if (Rtl819XRadioB_Array_Table[i] == 0xfb)
+						udelay(50);
+					else if (Rtl819XRadioB_Array_Table[i] == 0xfa)
+						udelay(5);
+					else if (Rtl819XRadioB_Array_Table[i] == 0xf9)
+						udelay(1);
+					else
+					{
+					rtl8192_phy_SetRFReg(dev, eRFPath, Rtl819XRadioB_Array_Table[i], bRFRegOffsetMask, Rtl819XRadioB_Array_Table[i+1]);
+					}
+			}
+			break;
+		case RF90_PATH_C:
+			break;
+		case RF90_PATH_D:
+			break;
+		default:
+			break;
+	}
+
+	return rtStatus;
+
+}
+
+/*-----------------------------------------------------------------------------
+ * Function:    PHY_CheckBBAndRFOK()
+ *
+ * Overview:    This function is write register and then readback to make sure whether
+ *			  BB[PHY0, PHY1], RF[Patha, path b, path c, path d] is Ok
+ *
+ * Input:      	PADAPTER			Adapter
+ *			HW90_BLOCK_E		CheckBlock
+ *			RF90_RADIO_PATH_E	eRFPath		// it is used only when CheckBlock is HW90_BLOCK_RF
+ *
+ * Output:      NONE
+ *
+ * Return:      RT_STATUS_SUCCESS: PHY is OK
+ *
+ * Note:		This function may be removed in the ASIC
+ *---------------------------------------------------------------------------*/
+//in 8256 phy_RF8256_Config_HardCode
+//but we don't use it temp
+RT_STATUS
+PHY_CheckBBAndRFOK(
+	struct net_device* dev,
+	HW90_BLOCK_E		CheckBlock,
+	RF90_RADIO_PATH_E	eRFPath
+	)
+{
+	//struct r8192_priv *priv = ieee80211_priv(dev);
+	RT_STATUS			rtStatus = RT_STATUS_SUCCESS;
+	u32				i, CheckTimes = 4,ulRegRead = 0;
+	u32				WriteAddr[4];
+	u32				WriteData[] = {0xfffff027, 0xaa55a02f, 0x00000027, 0x55aa502f};
+
+	// Initialize register address offset to be checked
+	WriteAddr[HW90_BLOCK_MAC] = 0x100;
+	WriteAddr[HW90_BLOCK_PHY0] = 0x900;
+	WriteAddr[HW90_BLOCK_PHY1] = 0x800;
+	WriteAddr[HW90_BLOCK_RF] = 0x3;
+
+	for(i=0 ; i < CheckTimes ; i++)
+	{
+
+		//
+		// Write Data to register and readback
+		//
+		switch(CheckBlock)
+		{
+		case HW90_BLOCK_MAC:
+			//RT_ASSERT(FALSE, ("PHY_CheckBBRFOK(): Never Write 0x100 here!"));
+			RT_TRACE(COMP_INIT, "PHY_CheckBBRFOK(): Never Write 0x100 here!\n");
+			break;
+
+		case HW90_BLOCK_PHY0:
+		case HW90_BLOCK_PHY1:
+			write_nic_dword(dev, WriteAddr[CheckBlock], WriteData[i]);
+			ulRegRead = read_nic_dword(dev, WriteAddr[CheckBlock]);
+			break;
+
+		case HW90_BLOCK_RF:
+			// When initialization, we want the delay function(mdelay(), delay_us()
+			// ==> actually we call PlatformStallExecution()) to do NdisStallExecution()
+			// [busy wait] instead of NdisMSleep(). So we acquire RT_INITIAL_SPINLOCK
+			// to run at Dispatch level to achive it.
+			//cosa PlatformAcquireSpinLock(dev, RT_INITIAL_SPINLOCK);
+			WriteData[i] &= 0xfff;
+			rtl8192_phy_SetRFReg(dev, eRFPath, WriteAddr[HW90_BLOCK_RF], bRFRegOffsetMask, WriteData[i]);
+			// TODO: we should not delay for such a long time. Ask SD3
+			mdelay(10);
+			ulRegRead = rtl8192_phy_QueryRFReg(dev, eRFPath, WriteAddr[HW90_BLOCK_RF], bMaskDWord);
+			mdelay(10);
+			//cosa PlatformReleaseSpinLock(dev, RT_INITIAL_SPINLOCK);
+			break;
+
+		default:
+			rtStatus = RT_STATUS_FAILURE;
+			break;
+		}
+
+
+		//
+		// Check whether readback data is correct
+		//
+		if(ulRegRead != WriteData[i])
+		{
+			//RT_TRACE(COMP_FPGA,  ("ulRegRead: %x, WriteData: %x \n", ulRegRead, WriteData[i]));
+			RT_TRACE(COMP_ERR, "read back error(read:%x, write:%x)\n", ulRegRead, WriteData[i]);
+			rtStatus = RT_STATUS_FAILURE;
+			break;
+		}
+	}
+
+	return rtStatus;
+}
+
+//no use temp in windows driver
+#ifdef TO_DO_LIST
+void
+PHY_SetRFPowerState8192SUsb(
+	struct net_device* dev,
+	RF_POWER_STATE	RFPowerState
+	)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	bool			WaitShutDown = FALSE;
+	u32			DWordContent;
+	//RF90_RADIO_PATH_E	eRFPath;
+	u8				eRFPath;
+	BB_REGISTER_DEFINITION_T	*pPhyReg;
+
+	if(priv->SetRFPowerStateInProgress == TRUE)
+		return;
+
+	priv->SetRFPowerStateInProgress = TRUE;
+
+	// TODO: Emily, 2006.11.21, we should rewrite this function
+
+	if(RFPowerState==RF_SHUT_DOWN)
+	{
+		RFPowerState=RF_OFF;
+		WaitShutDown=TRUE;
+	}
+
+
+	priv->RFPowerState = RFPowerState;
+	switch( priv->rf_chip )
+	{
+	case RF_8225:
+	case RF_6052:
+		switch( RFPowerState )
+		{
+		case RF_ON:
+			break;
+
+		case RF_SLEEP:
+			break;
+
+		case RF_OFF:
+			break;
+		}
+		break;
+
+	case RF_8256:
+		switch( RFPowerState )
+		{
+		case RF_ON:
+			break;
+
+		case RF_SLEEP:
+			break;
+
+		case RF_OFF:
+			for(eRFPath=(RF90_RADIO_PATH_E)RF90_PATH_A; eRFPath < RF90_PATH_MAX; eRFPath++)
+			{
+				if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
+					continue;
+
+				pPhyReg = &priv->PHYRegDef[eRFPath];
+				rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV, bRFSI_RFENV);
+				rtl8192_setBBreg(dev, pPhyReg->rfintfo, bRFSI_RFENV, 0);
+			}
+			break;
+		}
+		break;
+
+	case RF_8258:
+		break;
+	}// switch( priv->rf_chip )
+
+	priv->SetRFPowerStateInProgress = FALSE;
+}
+#endif
+
+#ifdef RTL8192U
+//no use temp in windows driver
+void
+PHY_UpdateInitialGain(
+	struct net_device* dev
+	)
+{
+	struct r8192_priv 	*priv = ieee80211_priv(dev);
+	//unsigned char			*IGTable;
+	//u8			DIG_CurrentInitialGain = 4;
+
+	switch(priv->rf_chip)
+	{
+	case RF_8225:
+		break;
+	case RF_8256:
+		break;
+	case RF_8258:
+		break;
+	case RF_PSEUDO_11N:
+		break;
+	case RF_6052:
+		break;
+	default:
+		RT_TRACE(COMP_DBG, "PHY_UpdateInitialGain(): unknown rf_chip: %#X\n", priv->rf_chip);
+		break;
+	}
+}
+#endif
+
+//YJ,modified,090107
+void PHY_GetHWRegOriginalValue(struct net_device* dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	// read tx power offset
+	// Simulate 8192
+	priv->MCSTxPowerLevelOriginalOffset[0] =
+		rtl8192_QueryBBReg(dev, rTxAGC_Rate18_06, bMaskDWord);
+	priv->MCSTxPowerLevelOriginalOffset[1] =
+		rtl8192_QueryBBReg(dev, rTxAGC_Rate54_24, bMaskDWord);
+	priv->MCSTxPowerLevelOriginalOffset[2] =
+		rtl8192_QueryBBReg(dev, rTxAGC_Mcs03_Mcs00, bMaskDWord);
+	priv->MCSTxPowerLevelOriginalOffset[3] =
+		rtl8192_QueryBBReg(dev, rTxAGC_Mcs07_Mcs04, bMaskDWord);
+	priv->MCSTxPowerLevelOriginalOffset[4] =
+		rtl8192_QueryBBReg(dev, rTxAGC_Mcs11_Mcs08, bMaskDWord);
+	priv->MCSTxPowerLevelOriginalOffset[5] =
+		rtl8192_QueryBBReg(dev, rTxAGC_Mcs15_Mcs12, bMaskDWord);
+
+	// Read CCK offset
+	priv->MCSTxPowerLevelOriginalOffset[6] =
+		rtl8192_QueryBBReg(dev, rTxAGC_CCK_Mcs32, bMaskDWord);
+	RT_TRACE(COMP_INIT, "Legacy OFDM =%08x/%08x HT_OFDM=%08x/%08x/%08x/%08x\n",
+	priv->MCSTxPowerLevelOriginalOffset[0], priv->MCSTxPowerLevelOriginalOffset[1] ,
+	priv->MCSTxPowerLevelOriginalOffset[2], priv->MCSTxPowerLevelOriginalOffset[3] ,
+	priv->MCSTxPowerLevelOriginalOffset[4], priv->MCSTxPowerLevelOriginalOffset[5] );
+
+	// read rx initial gain
+	priv->DefaultInitialGain[0] = rtl8192_QueryBBReg(dev, rOFDM0_XAAGCCore1, bMaskByte0);
+	priv->DefaultInitialGain[1] = rtl8192_QueryBBReg(dev, rOFDM0_XBAGCCore1, bMaskByte0);
+	priv->DefaultInitialGain[2] = rtl8192_QueryBBReg(dev, rOFDM0_XCAGCCore1, bMaskByte0);
+	priv->DefaultInitialGain[3] = rtl8192_QueryBBReg(dev, rOFDM0_XDAGCCore1, bMaskByte0);
+	RT_TRACE(COMP_INIT, "Default initial gain (c50=0x%x, c58=0x%x, c60=0x%x, c68=0x%x) \n",
+			priv->DefaultInitialGain[0], priv->DefaultInitialGain[1],
+			priv->DefaultInitialGain[2], priv->DefaultInitialGain[3]);
+
+	// read framesync
+	priv->framesync = rtl8192_QueryBBReg(dev, rOFDM0_RxDetector3, bMaskByte0);
+	priv->framesyncC34 = rtl8192_QueryBBReg(dev, rOFDM0_RxDetector2, bMaskDWord);
+	RT_TRACE(COMP_INIT, "Default framesync (0x%x) = 0x%x \n",
+				rOFDM0_RxDetector3, priv->framesync);
+}
+//YJ,modified,090107,end
+
+
+
+/**
+* Function:	phy_InitBBRFRegisterDefinition
+*
+* OverView:	Initialize Register definition offset for Radio Path A/B/C/D
+*
+* Input:
+*			PADAPTER		Adapter,
+*
+* Output:	None
+* Return:		None
+* Note:		The initialization value is constant and it should never be changes
+*/
+//use in phy only
+static void phy_InitBBRFRegisterDefinition(	struct net_device* dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	// RF Interface Sowrtware Control
+	priv->PHYRegDef[RF90_PATH_A].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 LSBs if read 32-bit from 0x870
+	priv->PHYRegDef[RF90_PATH_B].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 MSBs if read 32-bit from 0x870 (16-bit for 0x872)
+	priv->PHYRegDef[RF90_PATH_C].rfintfs = rFPGA0_XCD_RFInterfaceSW;// 16 LSBs if read 32-bit from 0x874
+	priv->PHYRegDef[RF90_PATH_D].rfintfs = rFPGA0_XCD_RFInterfaceSW;// 16 MSBs if read 32-bit from 0x874 (16-bit for 0x876)
+
+	// RF Interface Readback Value
+	priv->PHYRegDef[RF90_PATH_A].rfintfi = rFPGA0_XAB_RFInterfaceRB; // 16 LSBs if read 32-bit from 0x8E0
+	priv->PHYRegDef[RF90_PATH_B].rfintfi = rFPGA0_XAB_RFInterfaceRB;// 16 MSBs if read 32-bit from 0x8E0 (16-bit for 0x8E2)
+	priv->PHYRegDef[RF90_PATH_C].rfintfi = rFPGA0_XCD_RFInterfaceRB;// 16 LSBs if read 32-bit from 0x8E4
+	priv->PHYRegDef[RF90_PATH_D].rfintfi = rFPGA0_XCD_RFInterfaceRB;// 16 MSBs if read 32-bit from 0x8E4 (16-bit for 0x8E6)
+
+	// RF Interface Output (and Enable)
+	priv->PHYRegDef[RF90_PATH_A].rfintfo = rFPGA0_XA_RFInterfaceOE; // 16 LSBs if read 32-bit from 0x860
+	priv->PHYRegDef[RF90_PATH_B].rfintfo = rFPGA0_XB_RFInterfaceOE; // 16 LSBs if read 32-bit from 0x864
+	priv->PHYRegDef[RF90_PATH_C].rfintfo = rFPGA0_XC_RFInterfaceOE;// 16 LSBs if read 32-bit from 0x868
+	priv->PHYRegDef[RF90_PATH_D].rfintfo = rFPGA0_XD_RFInterfaceOE;// 16 LSBs if read 32-bit from 0x86C
+
+	// RF Interface (Output and)  Enable
+	priv->PHYRegDef[RF90_PATH_A].rfintfe = rFPGA0_XA_RFInterfaceOE; // 16 MSBs if read 32-bit from 0x860 (16-bit for 0x862)
+	priv->PHYRegDef[RF90_PATH_B].rfintfe = rFPGA0_XB_RFInterfaceOE; // 16 MSBs if read 32-bit from 0x864 (16-bit for 0x866)
+	priv->PHYRegDef[RF90_PATH_C].rfintfe = rFPGA0_XC_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86A (16-bit for 0x86A)
+	priv->PHYRegDef[RF90_PATH_D].rfintfe = rFPGA0_XD_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86C (16-bit for 0x86E)
+
+	//Addr of LSSI. Wirte RF register by driver
+	priv->PHYRegDef[RF90_PATH_A].rf3wireOffset = rFPGA0_XA_LSSIParameter; //LSSI Parameter
+	priv->PHYRegDef[RF90_PATH_B].rf3wireOffset = rFPGA0_XB_LSSIParameter;
+	priv->PHYRegDef[RF90_PATH_C].rf3wireOffset = rFPGA0_XC_LSSIParameter;
+	priv->PHYRegDef[RF90_PATH_D].rf3wireOffset = rFPGA0_XD_LSSIParameter;
+
+	// RF parameter
+	priv->PHYRegDef[RF90_PATH_A].rfLSSI_Select = rFPGA0_XAB_RFParameter;  //BB Band Select
+	priv->PHYRegDef[RF90_PATH_B].rfLSSI_Select = rFPGA0_XAB_RFParameter;
+	priv->PHYRegDef[RF90_PATH_C].rfLSSI_Select = rFPGA0_XCD_RFParameter;
+	priv->PHYRegDef[RF90_PATH_D].rfLSSI_Select = rFPGA0_XCD_RFParameter;
+
+	// Tx AGC Gain Stage (same for all path. Should we remove this?)
+	priv->PHYRegDef[RF90_PATH_A].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage
+	priv->PHYRegDef[RF90_PATH_B].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage
+	priv->PHYRegDef[RF90_PATH_C].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage
+	priv->PHYRegDef[RF90_PATH_D].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage
+
+	// Tranceiver A~D HSSI Parameter-1
+	priv->PHYRegDef[RF90_PATH_A].rfHSSIPara1 = rFPGA0_XA_HSSIParameter1;  //wire control parameter1
+	priv->PHYRegDef[RF90_PATH_B].rfHSSIPara1 = rFPGA0_XB_HSSIParameter1;  //wire control parameter1
+	priv->PHYRegDef[RF90_PATH_C].rfHSSIPara1 = rFPGA0_XC_HSSIParameter1;  //wire control parameter1
+	priv->PHYRegDef[RF90_PATH_D].rfHSSIPara1 = rFPGA0_XD_HSSIParameter1;  //wire control parameter1
+
+	// Tranceiver A~D HSSI Parameter-2
+	priv->PHYRegDef[RF90_PATH_A].rfHSSIPara2 = rFPGA0_XA_HSSIParameter2;  //wire control parameter2
+	priv->PHYRegDef[RF90_PATH_B].rfHSSIPara2 = rFPGA0_XB_HSSIParameter2;  //wire control parameter2
+	priv->PHYRegDef[RF90_PATH_C].rfHSSIPara2 = rFPGA0_XC_HSSIParameter2;  //wire control parameter2
+	priv->PHYRegDef[RF90_PATH_D].rfHSSIPara2 = rFPGA0_XD_HSSIParameter2;  //wire control parameter1
+
+	// RF switch Control
+	priv->PHYRegDef[RF90_PATH_A].rfSwitchControl = rFPGA0_XAB_SwitchControl; //TR/Ant switch control
+	priv->PHYRegDef[RF90_PATH_B].rfSwitchControl = rFPGA0_XAB_SwitchControl;
+	priv->PHYRegDef[RF90_PATH_C].rfSwitchControl = rFPGA0_XCD_SwitchControl;
+	priv->PHYRegDef[RF90_PATH_D].rfSwitchControl = rFPGA0_XCD_SwitchControl;
+
+	// AGC control 1
+	priv->PHYRegDef[RF90_PATH_A].rfAGCControl1 = rOFDM0_XAAGCCore1;
+	priv->PHYRegDef[RF90_PATH_B].rfAGCControl1 = rOFDM0_XBAGCCore1;
+	priv->PHYRegDef[RF90_PATH_C].rfAGCControl1 = rOFDM0_XCAGCCore1;
+	priv->PHYRegDef[RF90_PATH_D].rfAGCControl1 = rOFDM0_XDAGCCore1;
+
+	// AGC control 2
+	priv->PHYRegDef[RF90_PATH_A].rfAGCControl2 = rOFDM0_XAAGCCore2;
+	priv->PHYRegDef[RF90_PATH_B].rfAGCControl2 = rOFDM0_XBAGCCore2;
+	priv->PHYRegDef[RF90_PATH_C].rfAGCControl2 = rOFDM0_XCAGCCore2;
+	priv->PHYRegDef[RF90_PATH_D].rfAGCControl2 = rOFDM0_XDAGCCore2;
+
+	// RX AFE control 1
+	priv->PHYRegDef[RF90_PATH_A].rfRxIQImbalance = rOFDM0_XARxIQImbalance;
+	priv->PHYRegDef[RF90_PATH_B].rfRxIQImbalance = rOFDM0_XBRxIQImbalance;
+	priv->PHYRegDef[RF90_PATH_C].rfRxIQImbalance = rOFDM0_XCRxIQImbalance;
+	priv->PHYRegDef[RF90_PATH_D].rfRxIQImbalance = rOFDM0_XDRxIQImbalance;
+
+	// RX AFE control 1
+	priv->PHYRegDef[RF90_PATH_A].rfRxAFE = rOFDM0_XARxAFE;
+	priv->PHYRegDef[RF90_PATH_B].rfRxAFE = rOFDM0_XBRxAFE;
+	priv->PHYRegDef[RF90_PATH_C].rfRxAFE = rOFDM0_XCRxAFE;
+	priv->PHYRegDef[RF90_PATH_D].rfRxAFE = rOFDM0_XDRxAFE;
+
+	// Tx AFE control 1
+	priv->PHYRegDef[RF90_PATH_A].rfTxIQImbalance = rOFDM0_XATxIQImbalance;
+	priv->PHYRegDef[RF90_PATH_B].rfTxIQImbalance = rOFDM0_XBTxIQImbalance;
+	priv->PHYRegDef[RF90_PATH_C].rfTxIQImbalance = rOFDM0_XCTxIQImbalance;
+	priv->PHYRegDef[RF90_PATH_D].rfTxIQImbalance = rOFDM0_XDTxIQImbalance;
+
+	// Tx AFE control 2
+	priv->PHYRegDef[RF90_PATH_A].rfTxAFE = rOFDM0_XATxAFE;
+	priv->PHYRegDef[RF90_PATH_B].rfTxAFE = rOFDM0_XBTxAFE;
+	priv->PHYRegDef[RF90_PATH_C].rfTxAFE = rOFDM0_XCTxAFE;
+	priv->PHYRegDef[RF90_PATH_D].rfTxAFE = rOFDM0_XDTxAFE;
+
+	// Tranceiver LSSI Readback  SI mode
+	priv->PHYRegDef[RF90_PATH_A].rfLSSIReadBack = rFPGA0_XA_LSSIReadBack;
+	priv->PHYRegDef[RF90_PATH_B].rfLSSIReadBack = rFPGA0_XB_LSSIReadBack;
+	priv->PHYRegDef[RF90_PATH_C].rfLSSIReadBack = rFPGA0_XC_LSSIReadBack;
+	priv->PHYRegDef[RF90_PATH_D].rfLSSIReadBack = rFPGA0_XD_LSSIReadBack;
+
+	// Tranceiver LSSI Readback PI mode
+	priv->PHYRegDef[RF90_PATH_A].rfLSSIReadBackPi = TransceiverA_HSPI_Readback;
+	priv->PHYRegDef[RF90_PATH_B].rfLSSIReadBackPi = TransceiverB_HSPI_Readback;
+	//pHalData->PHYRegDef[RF90_PATH_C].rfLSSIReadBackPi = rFPGA0_XC_LSSIReadBack;
+	//pHalData->PHYRegDef[RF90_PATH_D].rfLSSIReadBackPi = rFPGA0_XD_LSSIReadBack;
+
+}
+
+
+//
+//	Description:  Change RF power state.
+//
+//	Assumption: This function must be executed in re-schdulable context,
+//		ie. PASSIVE_LEVEL.
+//
+//	050823, by rcnjko.
+//not understand it seem's use in init
+//SetHwReg8192SUsb--->HalFunc.SetHwRegHandler
+bool PHY_SetRFPowerState(struct net_device* dev, RT_RF_POWER_STATE eRFPowerState)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	bool			bResult = FALSE;
+
+	RT_TRACE(COMP_RF, "---------> PHY_SetRFPowerState(): eRFPowerState(%d)\n", eRFPowerState);
+
+	if(eRFPowerState == priv->ieee80211->eRFPowerState)
+	{
+		RT_TRACE(COMP_RF, "<--------- PHY_SetRFPowerState(): discard the request for eRFPowerState(%d) is the same.\n", eRFPowerState);
+		return bResult;
+	}
+
+	bResult = phy_SetRFPowerState8192SU(dev, eRFPowerState);
+
+	RT_TRACE(COMP_RF, "<--------- PHY_SetRFPowerState(): bResult(%d)\n", bResult);
+
+	return bResult;
+}
+
+//use in phy only
+static bool phy_SetRFPowerState8192SU(struct net_device* dev,RT_RF_POWER_STATE eRFPowerState)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	bool			bResult = TRUE;
+	//u8		eRFPath;
+	//u8		i, QueueID;
+	u8 		u1bTmp;
+
+	if(priv->SetRFPowerStateInProgress == TRUE)
+		return FALSE;
+
+	priv->SetRFPowerStateInProgress = TRUE;
+
+	switch(priv->rf_chip )
+	{
+		default:
+		switch( eRFPowerState )
+		{
+			case eRfOn:
+				write_nic_dword(dev, WFM5, FW_BB_RESET_ENABLE);
+				write_nic_word(dev, CMDR, 0x37FC);
+				write_nic_byte(dev, PHY_CCA, 0x3);
+				write_nic_byte(dev, TXPAUSE, 0x00);
+				write_nic_byte(dev, SPS1_CTRL, 0x64);
+				break;
+
+			//
+			// In current solution, RFSleep=RFOff in order to save power under 802.11 power save.
+			// By Bruce, 2008-01-16.
+			//
+			case eRfSleep:
+			case eRfOff:
+			  	if (priv->ieee80211->eRFPowerState == eRfSleep || priv->ieee80211->eRFPowerState == eRfOff)
+						break;
+#ifdef NOT_YET
+				// Make sure BusyQueue is empty befor turn off RFE pwoer.
+				for(QueueID = 0, i = 0; QueueID < MAX_TX_QUEUE; )
+				{
+					if(RTIsListEmpty(&Adapter->TcbBusyQueue[QueueID]))
+					{
+						QueueID++;
+						continue;
+					}
+					else
+					{
+						RT_TRACE(COMP_POWER, "eRf Off/Sleep: %d times TcbBusyQueue[%d] !=0 before doze!\n", (i+1), QueueID);
+						udelay(10);
+						i++;
+					}
+
+					if(i >= MAX_DOZE_WAITING_TIMES_9x)
+					{
+						RT_TRACE(COMP_POWER, "\n\n\n SetZebraRFPowerState8185B(): eRfOff: %d times TcbBusyQueue[%d] != 0 !!!\n\n\n", MAX_DOZE_WAITING_TIMES_9x, QueueID);
+						break;
+					}
+				}
+#endif
+				//
+				//RF Off/Sleep sequence. Designed/tested from SD4 Scott, SD1 Grent and Jonbon.
+				// Added by Bruce, 2008-11-22.
+				//
+				//==================================================================
+				// (0) Disable FW BB reset checking
+				write_nic_dword(dev, WFM5, FW_BB_RESET_DISABLE);
+
+				// (1) Switching Power Supply Register : Disable LD12 & SW12 (for IT)
+				u1bTmp = read_nic_byte(dev, LDOV12D_CTRL);
+				u1bTmp |= BIT0;
+				write_nic_byte(dev, LDOV12D_CTRL, u1bTmp);
+
+				write_nic_byte(dev, SPS1_CTRL, 0x0);
+				write_nic_byte(dev, TXPAUSE, 0xFF);
+
+				// (2) MAC Tx/Rx enable, BB enable, CCK/OFDM enable
+				write_nic_word(dev, CMDR, 0x77FC);
+				write_nic_byte(dev, PHY_CCA, 0x0);
+				udelay(100);
+
+				write_nic_word(dev, CMDR, 0x37FC);
+				udelay(10);
+
+				write_nic_word(dev, CMDR, 0x77FC);
+				udelay(10);
+
+				// (3) Reset BB TRX blocks
+				write_nic_word(dev, CMDR, 0x57FC);
+				break;
+
+			default:
+				bResult = FALSE;
+				//RT_ASSERT(FALSE, ("phy_SetRFPowerState8192SU(): unknow state to set: 0x%X!!!\n", eRFPowerState));
+				break;
+		}
+		break;
+
+	}
+	priv->ieee80211->eRFPowerState = eRFPowerState;
+#ifdef TO_DO_LIST
+	if(bResult)
+	{
+		// Update current RF state variable.
+		priv->ieee80211->eRFPowerState = eRFPowerState;
+
+		switch(priv->rf_chip )
+		{
+			case RF_8256:
+			switch(priv->ieee80211->eRFPowerState)
+			{
+				case eRfOff:
+					//
+					//If Rf off reason is from IPS, Led should blink with no link, by Maddest 071015
+					//
+					if(pMgntInfo->RfOffReason==RF_CHANGE_BY_IPS )
+					{
+						dev->HalFunc.LedControlHandler(dev,LED_CTL_NO_LINK);
+					}
+					else
+					{
+						// Turn off LED if RF is not ON.
+						dev->HalFunc.LedControlHandler(dev, LED_CTL_POWER_OFF);
+					}
+					break;
+
+				case eRfOn:
+					// Turn on RF we are still linked, which might happen when
+					// we quickly turn off and on HW RF. 2006.05.12, by rcnjko.
+					if( pMgntInfo->bMediaConnect == TRUE )
+					{
+						dev->HalFunc.LedControlHandler(dev, LED_CTL_LINK);
+					}
+					else
+					{
+						// Turn off LED if RF is not ON.
+						dev->HalFunc.LedControlHandler(dev, LED_CTL_NO_LINK);
+					}
+					break;
+
+				default:
+					// do nothing.
+					break;
+			}// Switch RF state
+
+				break;
+
+			default:
+				RT_TRACE(COMP_RF, "phy_SetRFPowerState8192SU(): Unknown RF type\n");
+				break;
+		}// Switch rf_chip
+	}
+#endif
+	priv->SetRFPowerStateInProgress = FALSE;
+
+	return bResult;
+}
+
+/*-----------------------------------------------------------------------------
+ * Function:    GetTxPowerLevel8190()
+ *
+ * Overview:    This function is export to "common" moudule
+ *
+ * Input:       PADAPTER		Adapter
+ *			psByte			Power Level
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ *---------------------------------------------------------------------------*/
+ // no use temp
+ void
+PHY_GetTxPowerLevel8192S(
+	struct net_device* dev,
+	 long*    		powerlevel
+	)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u8			TxPwrLevel = 0;
+	long			TxPwrDbm;
+	//
+	// Because the Tx power indexes are different, we report the maximum of them to
+	// meet the CCX TPC request. By Bruce, 2008-01-31.
+	//
+
+	// CCK
+	TxPwrLevel = priv->CurrentCckTxPwrIdx;
+	TxPwrDbm = phy_TxPwrIdxToDbm(dev, WIRELESS_MODE_B, TxPwrLevel);
+
+	// Legacy OFDM
+	TxPwrLevel = priv->CurrentOfdm24GTxPwrIdx + priv->LegacyHTTxPowerDiff;
+
+	// Compare with Legacy OFDM Tx power.
+	if(phy_TxPwrIdxToDbm(dev, WIRELESS_MODE_G, TxPwrLevel) > TxPwrDbm)
+		TxPwrDbm = phy_TxPwrIdxToDbm(dev, WIRELESS_MODE_G, TxPwrLevel);
+
+	// HT OFDM
+	TxPwrLevel = priv->CurrentOfdm24GTxPwrIdx;
+
+	// Compare with HT OFDM Tx power.
+	if(phy_TxPwrIdxToDbm(dev, WIRELESS_MODE_N_24G, TxPwrLevel) > TxPwrDbm)
+		TxPwrDbm = phy_TxPwrIdxToDbm(dev, WIRELESS_MODE_N_24G, TxPwrLevel);
+
+	*powerlevel = TxPwrDbm;
+}
+
+/*-----------------------------------------------------------------------------
+ * Function:    SetTxPowerLevel8190()
+ *
+ * Overview:    This function is export to "HalCommon" moudule
+ *
+ * Input:       PADAPTER		Adapter
+ *			u1Byte		channel
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *	2008/11/04	MHC		We remove EEPROM_93C56.
+ *						We need to move CCX relative code to independet file.
+*	2009/01/21	MHC		Support new EEPROM format from SD3 requirement.
+  *---------------------------------------------------------------------------*/
+ void PHY_SetTxPowerLevel8192S(struct net_device* dev, u8	channel)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	//HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(dev);
+	u8	powerlevel = (u8)EEPROM_Default_TxPower, powerlevelOFDM24G = 0x10;
+	s8 	ant_pwr_diff = 0;
+	u32	u4RegValue;
+	u8	index = (channel -1);
+	// 2009/01/22 MH Add for new EEPROM format from SD3
+	u8	pwrdiff[2] = {0};
+	u8	ht20pwr[2] = {0}, ht40pwr[2] = {0};
+	u8	rfpath = 0, rfpathnum = 2;
+
+	if(priv->bTXPowerDataReadFromEEPORM == FALSE)
+		return;
+
+	//
+	// Read predefined TX power index in EEPROM
+	//
+//	if(priv->epromtype == EPROM_93c46)
+	{
+#ifdef EEPROM_OLD_FORMAT_SUPPORT
+		powerlevel = priv->TxPowerLevelCCK[index];
+		powerlevelOFDM24G = priv->TxPowerLevelOFDM24G[index];
+#else
+		//
+		// Mainly we use RF-A Tx Power to write the Tx Power registers, but the RF-B Tx
+		// Power must be calculated by the antenna diff.
+		// So we have to rewrite Antenna gain offset register here.
+		// Please refer to BB register 0x80c
+		// 1. For CCK.
+		// 2. For OFDM 1T or 2T
+		//
+
+		// 1. CCK
+		powerlevel = priv->RfTxPwrLevelCck[0][index];
+
+		if (priv->rf_type == RF_1T2R || priv->rf_type == RF_1T1R)
+		{
+		// Read HT 40 OFDM TX power
+		powerlevelOFDM24G = priv->RfTxPwrLevelOfdm1T[0][index];
+		// RF B HT OFDM pwr-RFA HT OFDM pwr
+		// Only one RF we need not to decide B <-> A pwr diff
+
+		// Legacy<->HT pwr diff, we only care about path A.
+
+		// We only assume 1T as RF path A
+		rfpathnum = 1;
+		ht20pwr[0] = ht40pwr[0] = priv->RfTxPwrLevelOfdm1T[0][index];
+		}
+		else if (priv->rf_type == RF_2T2R)
+		{
+		// Read HT 40 OFDM TX power
+		powerlevelOFDM24G = priv->RfTxPwrLevelOfdm2T[0][index];
+			// RF B HT OFDM pwr-RFA HT OFDM pwr
+		ant_pwr_diff = 	priv->RfTxPwrLevelOfdm2T[1][index] -
+						priv->RfTxPwrLevelOfdm2T[0][index];
+			// RF B (HT OFDM pwr+legacy-ht-diff) -(RFA HT OFDM pwr+legacy-ht-diff)
+		// We can not handle Path B&A HT/Legacy pwr diff for 92S now.
+
+		//RTPRINT(FPHY, PHY_TXPWR, ("CH-%d HT40 A/B Pwr index = %x/%x(%d/%d)\n",
+		//channel, priv->RfTxPwrLevelOfdm2T[0][index],
+		//priv->RfTxPwrLevelOfdm2T[1][index],
+		//priv->RfTxPwrLevelOfdm2T[0][index],
+		//priv->RfTxPwrLevelOfdm2T[1][index]));
+
+		ht20pwr[0] = ht40pwr[0] = priv->RfTxPwrLevelOfdm2T[0][index];
+		ht20pwr[1] = ht40pwr[1] = priv->RfTxPwrLevelOfdm2T[1][index];
+	}
+
+	//
+	// 2009/01/21 MH Support new EEPROM format from SD3 requirement
+	// 2009/02/10 Cosa, Here is only for reg B/C/D to A gain diff.
+	//
+	if (priv->EEPROMVersion == 2)	// Defined by SD1 Jong
+	{
+		if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20)
+		{
+			for (rfpath = 0; rfpath < rfpathnum; rfpath++)
+			{
+				// HT 20<->40 pwr diff
+				pwrdiff[rfpath] = priv->TxPwrHt20Diff[rfpath][index];
+
+				// Calculate Antenna pwr diff
+				if (pwrdiff[rfpath] < 8)	// 0~+7
+				{
+				#if 0//cosa, it doesn't need to add the offset here
+					if (rfpath == 0)
+						powerlevelOFDM24G += pwrdiff[rfpath];
+				#endif
+					ht20pwr[rfpath] += pwrdiff[rfpath];
+				}
+				else				// index8-15=-8~-1
+				{
+				#if 0//cosa, it doesn't need to add the offset here
+					if (rfpath == 0)
+						powerlevelOFDM24G -= (15-pwrdiff[rfpath]);
+				#endif
+					ht20pwr[rfpath] -= (15-pwrdiff[rfpath]);
+				}
+			}
+
+			// RF B HT OFDM pwr-RFA HT OFDM pwr
+			if (priv->rf_type == RF_2T2R)
+				ant_pwr_diff = ht20pwr[1] - ht20pwr[0];
+
+			//RTPRINT(FPHY, PHY_TXPWR,
+			//("HT20 to HT40 pwrdiff[A/B]=%d/%d, ant_pwr_diff=%d(B-A=%d-%d)\n",
+			//pwrdiff[0], pwrdiff[1], ant_pwr_diff, ht20pwr[1], ht20pwr[0]));
+		}
+
+		// Band Edge scheme is enabled for FCC mode
+		if (priv->TxPwrbandEdgeFlag == 1/* && pHalData->ChannelPlan == 0*/)
+		{
+			for (rfpath = 0; rfpath < rfpathnum; rfpath++)
+			{
+				pwrdiff[rfpath] = 0;
+				if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40)
+				{
+					if (channel <= 3)
+						pwrdiff[rfpath] = priv->TxPwrbandEdgeHt40[rfpath][0];
+					else if (channel >= 9)
+						pwrdiff[rfpath] = priv->TxPwrbandEdgeHt40[rfpath][1];
+					else
+						pwrdiff[rfpath] = 0;
+
+					ht40pwr[rfpath] -= pwrdiff[rfpath];
+				}
+				else if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20)
+				{
+					if (channel == 1)
+						pwrdiff[rfpath] = priv->TxPwrbandEdgeHt20[rfpath][0];
+					else if (channel >= 11)
+						pwrdiff[rfpath] = priv->TxPwrbandEdgeHt20[rfpath][1];
+					else
+						pwrdiff[rfpath] = 0;
+
+					ht20pwr[rfpath] -= pwrdiff[rfpath];
+				}
+			#if 0//cosa, it doesn't need to add the offset here
+				if (rfpath == 0)
+					powerlevelOFDM24G -= pwrdiff[rfpath];
+			#endif
+			}
+
+			if (priv->rf_type == RF_2T2R)
+			{
+				// HT 20/40 must decide if they need to minus  BD pwr offset
+				if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40)
+					ant_pwr_diff = ht40pwr[1] - ht40pwr[0];
+				else
+					ant_pwr_diff = ht20pwr[1] - ht20pwr[0];
+			}
+			if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20)
+			{
+				if (channel <= 1 || channel >= 11)
+				{
+					//RTPRINT(FPHY, PHY_TXPWR,
+					//("HT20 Band-edge pwrdiff[A/B]=%d/%d, ant_pwr_diff=%d(B-A=%d-%d)\n",
+					//pwrdiff[0], pwrdiff[1], ant_pwr_diff, ht20pwr[1], ht20pwr[0]));
+				}
+			}
+			else
+			{
+				if (channel <= 3 || channel >= 9)
+				{
+					//RTPRINT(FPHY, PHY_TXPWR,
+					//("HT40 Band-edge pwrdiff[A/B]=%d/%d, ant_pwr_diff=%d(B-A=%d-%d)\n",
+					//pwrdiff[0], pwrdiff[1], ant_pwr_diff, ht40pwr[1], ht40pwr[0]));
+				}
+			}
+		}
+#if 0//cosa, useless
+		// Read HT/Legacy OFDM diff
+		legacy_ant_pwr_diff= pHalData->TxPwrLegacyHtDiff[RF90_PATH_A][index];
+#endif
+		}
+
+	//Cosa added for protection, the reg rFPGA0_TxGainStage
+	// range is from 7~-8, index = 0x0~0xf
+	if(ant_pwr_diff > 7)
+		ant_pwr_diff = 7;
+	if(ant_pwr_diff < -8)
+		ant_pwr_diff = -8;
+
+		//RTPRINT(FPHY, PHY_TXPWR,
+		//("CCK/HT Power index = %x/%x(%d/%d), ant_pwr_diff=%d\n",
+		//powerlevel, powerlevelOFDM24G, powerlevel, powerlevelOFDM24G, ant_pwr_diff));
+
+		ant_pwr_diff &= 0xf;
+
+		// Antenna TX power difference
+		priv->AntennaTxPwDiff[2] = 0;// RF-D, don't care
+		priv->AntennaTxPwDiff[1] = 0;// RF-C, don't care
+		priv->AntennaTxPwDiff[0] = (u8)(ant_pwr_diff);		// RF-B
+
+		// Antenna gain offset from B/C/D to A
+		u4RegValue = (	priv->AntennaTxPwDiff[2]<<8 |
+						priv->AntennaTxPwDiff[1]<<4 |
+						priv->AntennaTxPwDiff[0]	);
+
+		// Notify Tx power difference for B/C/D to A!!!
+		rtl8192_setBBreg(dev, rFPGA0_TxGainStage, (bXBTxAGC|bXCTxAGC|bXDTxAGC), u4RegValue);
+#endif
+	}
+
+	//
+	// CCX 2 S31, AP control of client transmit power:
+	// 1. We shall not exceed Cell Power Limit as possible as we can.
+	// 2. Tolerance is +/- 5dB.
+	// 3. 802.11h Power Contraint takes higher precedence over CCX Cell Power Limit.
+	//
+	// TODO:
+	// 1. 802.11h power contraint
+	//
+	// 071011, by rcnjko.
+	//
+#ifdef TODO //WB, 11h has not implemented now.
+	if(	priv->ieee80211->iw_mode != IW_MODE_INFRA && priv->bWithCcxCellPwr &&
+		channel == priv->ieee80211->current_network.channel)// & priv->ieee80211->mAssoc )
+	{
+		u8	CckCellPwrIdx = phy_DbmToTxPwrIdx(dev, WIRELESS_MODE_B, priv->CcxCellPwr);
+		u8	LegacyOfdmCellPwrIdx = phy_DbmToTxPwrIdx(dev, WIRELESS_MODE_G, priv->CcxCellPwr);
+		u8	OfdmCellPwrIdx = phy_DbmToTxPwrIdx(dev, WIRELESS_MODE_N_24G, priv->CcxCellPwr);
+
+		RT_TRACE(COMP_TXAGC,
+		("CCX Cell Limit: %d dbm => CCK Tx power index : %d, Legacy OFDM Tx power index : %d, OFDM Tx power index: %d\n",
+		priv->CcxCellPwr, CckCellPwrIdx, LegacyOfdmCellPwrIdx, OfdmCellPwrIdx));
+		RT_TRACE(COMP_TXAGC,
+		("EEPROM channel(%d) => CCK Tx power index: %d, Legacy OFDM Tx power index : %d, OFDM Tx power index: %d\n",
+		channel, powerlevel, powerlevelOFDM24G + priv->LegacyHTTxPowerDiff, powerlevelOFDM24G));
+
+		// CCK
+		if(powerlevel > CckCellPwrIdx)
+			powerlevel = CckCellPwrIdx;
+		// Legacy OFDM, HT OFDM
+		if(powerlevelOFDM24G + priv->LegacyHTTxPowerDiff > LegacyOfdmCellPwrIdx)
+		{
+			if((OfdmCellPwrIdx - priv->LegacyHTTxPowerDiff) > 0)
+			{
+				powerlevelOFDM24G = OfdmCellPwrIdx - priv->LegacyHTTxPowerDiff;
+			}
+			else
+			{
+				powerlevelOFDM24G = 0;
+			}
+		}
+
+		RT_TRACE(COMP_TXAGC,
+		("Altered CCK Tx power index : %d, Legacy OFDM Tx power index: %d, OFDM Tx power index: %d\n",
+		powerlevel, powerlevelOFDM24G + priv->LegacyHTTxPowerDiff, powerlevelOFDM24G));
+	}
+#endif
+
+	priv->CurrentCckTxPwrIdx = powerlevel;
+	priv->CurrentOfdm24GTxPwrIdx = powerlevelOFDM24G;
+
+	switch(priv->rf_chip)
+	{
+		case RF_8225:
+			//PHY_SetRF8225CckTxPower(dev, powerlevel);
+			//PHY_SetRF8225OfdmTxPower(dev, powerlevelOFDM24G);
+		break;
+
+		case RF_8256:
+#if 0
+			PHY_SetRF8256CCKTxPower(dev, powerlevel);
+			PHY_SetRF8256OFDMTxPower(dev, powerlevelOFDM24G);
+#endif
+			break;
+
+		case RF_6052:
+			PHY_RF6052SetCckTxPower(dev, powerlevel);
+			PHY_RF6052SetOFDMTxPower(dev, powerlevelOFDM24G);
+			break;
+
+		case RF_8258:
+			break;
+		default:
+			break;
+	}
+
+}
+
+//
+//	Description:
+//		Update transmit power level of all channel supported.
+//
+//	TODO:
+//		A mode.
+//	By Bruce, 2008-02-04.
+//    no use temp
+bool PHY_UpdateTxPowerDbm8192S(struct net_device* dev, long powerInDbm)
+{
+	struct r8192_priv 	*priv = ieee80211_priv(dev);
+	u8				idx;
+	u8				rf_path;
+
+	// TODO: A mode Tx power.
+	u8	CckTxPwrIdx = phy_DbmToTxPwrIdx(dev, WIRELESS_MODE_B, powerInDbm);
+	u8	OfdmTxPwrIdx = phy_DbmToTxPwrIdx(dev, WIRELESS_MODE_N_24G, powerInDbm);
+
+	if(OfdmTxPwrIdx - priv->LegacyHTTxPowerDiff > 0)
+		OfdmTxPwrIdx -= priv->LegacyHTTxPowerDiff;
+	else
+		OfdmTxPwrIdx = 0;
+
+	for(idx = 0; idx < 14; idx++)
+	{
+		priv->TxPowerLevelCCK[idx] = CckTxPwrIdx;
+		priv->TxPowerLevelCCK_A[idx] = CckTxPwrIdx;
+		priv->TxPowerLevelCCK_C[idx] = CckTxPwrIdx;
+		priv->TxPowerLevelOFDM24G[idx] = OfdmTxPwrIdx;
+		priv->TxPowerLevelOFDM24G_A[idx] = OfdmTxPwrIdx;
+		priv->TxPowerLevelOFDM24G_C[idx] = OfdmTxPwrIdx;
+
+		for (rf_path = 0; rf_path < 2; rf_path++)
+		{
+			priv->RfTxPwrLevelCck[rf_path][idx] = CckTxPwrIdx;
+			priv->RfTxPwrLevelOfdm1T[rf_path][idx] =  \
+			priv->RfTxPwrLevelOfdm2T[rf_path][idx] = OfdmTxPwrIdx;
+		}
+	}
+
+	PHY_SetTxPowerLevel8192S(dev, priv->chan);
+
+	return TRUE;
+}
+
+/*
+	Description:
+		When beacon interval is changed, the values of the
+		hw registers should be modified.
+	By tynli, 2008.10.24.
+
+*/
+
+extern void PHY_SetBeaconHwReg(	struct net_device* dev, u16 BeaconInterval)
+{
+	u32 NewBeaconNum;
+
+	NewBeaconNum = BeaconInterval *32 - 64;
+	//PlatformEFIOWrite4Byte(Adapter, WFM3+4, NewBeaconNum);
+	//PlatformEFIOWrite4Byte(Adapter, WFM3, 0xB026007C);
+	write_nic_dword(dev, WFM3+4, NewBeaconNum);
+	write_nic_dword(dev, WFM3, 0xB026007C);
+}
+
+//
+//	Description:
+//		Map dBm into Tx power index according to
+//		current HW model, for example, RF and PA, and
+//		current wireless mode.
+//	By Bruce, 2008-01-29.
+//    use in phy only
+static u8 phy_DbmToTxPwrIdx(
+	struct net_device* dev,
+	WIRELESS_MODE	WirelessMode,
+	long			PowerInDbm
+	)
+{
+	//struct r8192_priv *priv = ieee80211_priv(dev);
+	u8				TxPwrIdx = 0;
+	long				Offset = 0;
+
+
+	//
+	// Tested by MP, we found that CCK Index 0 equals to -7dbm, OFDM legacy equals to
+	// 3dbm, and OFDM HT equals to 0dbm repectively.
+	// Note:
+	//	The mapping may be different by different NICs. Do not use this formula for what needs accurate result.
+	// By Bruce, 2008-01-29.
+	//
+	switch(WirelessMode)
+	{
+	case WIRELESS_MODE_B:
+		Offset = -7;
+		break;
+
+	case WIRELESS_MODE_G:
+	case WIRELESS_MODE_N_24G:
+		Offset = -8;
+		break;
+	default:
+		break;
+	}
+
+	if((PowerInDbm - Offset) > 0)
+	{
+		TxPwrIdx = (u8)((PowerInDbm - Offset) * 2);
+	}
+	else
+	{
+		TxPwrIdx = 0;
+	}
+
+	// Tx Power Index is too large.
+	if(TxPwrIdx > MAX_TXPWR_IDX_NMODE_92S)
+		TxPwrIdx = MAX_TXPWR_IDX_NMODE_92S;
+
+	return TxPwrIdx;
+}
+//
+//	Description:
+//		Map Tx power index into dBm according to
+//		current HW model, for example, RF and PA, and
+//		current wireless mode.
+//	By Bruce, 2008-01-29.
+//    use in phy only
+static long phy_TxPwrIdxToDbm(
+	struct net_device* dev,
+	WIRELESS_MODE	WirelessMode,
+	u8			TxPwrIdx
+	)
+{
+	//struct r8192_priv *priv = ieee80211_priv(dev);
+	long				Offset = 0;
+	long				PwrOutDbm = 0;
+
+	//
+	// Tested by MP, we found that CCK Index 0 equals to -7dbm, OFDM legacy equals to
+	// 3dbm, and OFDM HT equals to 0dbm repectively.
+	// Note:
+	//	The mapping may be different by different NICs. Do not use this formula for what needs accurate result.
+	// By Bruce, 2008-01-29.
+	//
+	switch(WirelessMode)
+	{
+	case WIRELESS_MODE_B:
+		Offset = -7;
+		break;
+
+	case WIRELESS_MODE_G:
+	case WIRELESS_MODE_N_24G:
+		Offset = -8;
+		break;
+	default:
+		break;
+	}
+
+	PwrOutDbm = TxPwrIdx / 2 + Offset; // Discard the decimal part.
+
+	return PwrOutDbm;
+}
+
+#ifdef TO_DO_LIST
+extern	VOID
+PHY_ScanOperationBackup8192S(
+	IN	PADAPTER	Adapter,
+	IN	u1Byte		Operation
+	)
+{
+
+	HAL_DATA_TYPE			*pHalData = GET_HAL_DATA(Adapter);
+	PMGNT_INFO			pMgntInfo = &(Adapter->MgntInfo);
+	u4Byte				BitMask;
+	u1Byte				initial_gain;
+
+
+
+
+#if(RTL8192S_DISABLE_FW_DM == 0)
+
+	if(!Adapter->bDriverStopped)
+	{
+		switch(Operation)
+		{
+			case SCAN_OPT_BACKUP:
+				//
+				// <Roger_Notes> We halt FW DIG and disable high ppower both two DMs here
+				// and resume both two DMs while scan complete.
+				// 2008.11.27.
+				//
+				Adapter->HalFunc.SetFwCmdHandler(Adapter, FW_CMD_PAUSE_DM_BY_SCAN);
+				break;
+
+			case SCAN_OPT_RESTORE:
+				//
+				// <Roger_Notes> We resume DIG and enable high power both two DMs here and
+				// recover earlier DIG settings.
+				// 2008.11.27.
+				//
+				Adapter->HalFunc.SetFwCmdHandler(Adapter, FW_CMD_RESUME_DM_BY_SCAN);
+				break;
+
+			default:
+				RT_TRACE(COMP_SCAN, DBG_LOUD, ("Unknown Scan Backup Operation. \n"));
+				break;
+		}
+	}
+#endif
+}
+#endif
+
+//nouse temp
+void PHY_InitialGain8192S(struct net_device* dev,u8 Operation	)
+{
+
+	//struct r8192_priv *priv = ieee80211_priv(dev);
+	//u32					BitMask;
+	//u8					initial_gain;
+
+#if 0	// For 8192s test disable
+	if(!dev->bDriverStopped)
+	{
+		switch(Operation)
+		{
+			case IG_Backup:
+			RT_TRACE(COMP_SCAN, DBG_LOUD, ("IG_Backup, backup the initial gain.\n"));
+				initial_gain = priv->DefaultInitialGain[0];
+				BitMask = bMaskByte0;
+				if(DM_DigTable.Dig_Algorithm == DIG_ALGO_BY_FALSE_ALARM)
+					PHY_SetMacReg(dev, UFWP, bMaskByte1, 0x8);	// FW DIG OFF
+				pMgntInfo->InitGain_Backup.XAAGCCore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XAAGCCore1, BitMask);
+				pMgntInfo->InitGain_Backup.XBAGCCore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XBAGCCore1, BitMask);
+				pMgntInfo->InitGain_Backup.XCAGCCore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XCAGCCore1, BitMask);
+				pMgntInfo->InitGain_Backup.XDAGCCore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XDAGCCore1, BitMask);
+				BitMask  = bMaskByte2;
+				pMgntInfo->InitGain_Backup.CCA		= (u8)rtl8192_QueryBBReg(dev, rCCK0_CCA, BitMask);
+
+			RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan InitialGainBackup 0xc50 is %x\n",pMgntInfo->InitGain_Backup.XAAGCCore1));
+			RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan InitialGainBackup 0xc58 is %x\n",pMgntInfo->InitGain_Backup.XBAGCCore1));
+			RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan InitialGainBackup 0xc60 is %x\n",pMgntInfo->InitGain_Backup.XCAGCCore1));
+			RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan InitialGainBackup 0xc68 is %x\n",pMgntInfo->InitGain_Backup.XDAGCCore1));
+			RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan InitialGainBackup 0xa0a is %x\n",pMgntInfo->InitGain_Backup.CCA));
+
+			RT_TRACE(COMP_SCAN, DBG_LOUD, ("Write scan initial gain = 0x%x \n", initial_gain));
+				write_nic_byte(dev, rOFDM0_XAAGCCore1, initial_gain);
+				write_nic_byte(dev, rOFDM0_XBAGCCore1, initial_gain);
+				write_nic_byte(dev, rOFDM0_XCAGCCore1, initial_gain);
+				write_nic_byte(dev, rOFDM0_XDAGCCore1, initial_gain);
+				break;
+			case IG_Restore:
+			RT_TRACE(COMP_SCAN, DBG_LOUD, ("IG_Restore, restore the initial gain.\n"));
+				BitMask = 0x7f; //Bit0~ Bit6
+				if(DM_DigTable.Dig_Algorithm == DIG_ALGO_BY_FALSE_ALARM)
+					PHY_SetMacReg(dev, UFWP, bMaskByte1, 0x8);	// FW DIG OFF
+
+				rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, BitMask, (u32)pMgntInfo->InitGain_Backup.XAAGCCore1);
+				rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, BitMask, (u32)pMgntInfo->InitGain_Backup.XBAGCCore1);
+				rtl8192_setBBreg(dev, rOFDM0_XCAGCCore1, BitMask, (u32)pMgntInfo->InitGain_Backup.XCAGCCore1);
+				rtl8192_setBBreg(dev, rOFDM0_XDAGCCore1, BitMask, (u32)pMgntInfo->InitGain_Backup.XDAGCCore1);
+				BitMask  = (BIT22|BIT23);
+				rtl8192_setBBreg(dev, rCCK0_CCA, BitMask, (u32)pMgntInfo->InitGain_Backup.CCA);
+
+			RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan BBInitialGainRestore 0xc50 is %x\n",pMgntInfo->InitGain_Backup.XAAGCCore1));
+			RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan BBInitialGainRestore 0xc58 is %x\n",pMgntInfo->InitGain_Backup.XBAGCCore1));
+			RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan BBInitialGainRestore 0xc60 is %x\n",pMgntInfo->InitGain_Backup.XCAGCCore1));
+			RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan BBInitialGainRestore 0xc68 is %x\n",pMgntInfo->InitGain_Backup.XDAGCCore1));
+			RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan BBInitialGainRestore 0xa0a is %x\n",pMgntInfo->InitGain_Backup.CCA));
+
+				if(DM_DigTable.Dig_Algorithm == DIG_ALGO_BY_FALSE_ALARM)
+					PHY_SetMacReg(dev, UFWP, bMaskByte1, 0x1);	// FW DIG ON
+				break;
+			default:
+			RT_TRACE(COMP_SCAN, DBG_LOUD, ("Unknown IG Operation. \n"));
+				break;
+		}
+	}
+#endif
+}
+
+/*-----------------------------------------------------------------------------
+ * Function:    SetBWModeCallback8190Pci()
+ *
+ * Overview:    Timer callback function for SetSetBWMode
+ *
+ * Input:       	PRT_TIMER		pTimer
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Note:		(1) We do not take j mode into consideration now
+ *			(2) Will two workitem of "switch channel" and "switch channel bandwidth" run
+ *			     concurrently?
+ *---------------------------------------------------------------------------*/
+//    use in phy only (in win it's timer)
+void PHY_SetBWModeCallback8192S(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u8	 			regBwOpMode;
+
+	//return;
+
+	// Added it for 20/40 mhz switch time evaluation by guangan 070531
+	//u32				NowL, NowH;
+	//u8Byte				BeginTime, EndTime;
+	u8				regRRSR_RSC;
+
+	RT_TRACE(COMP_SWBW, "==>SetBWModeCallback8190Pci()  Switch to %s bandwidth\n", \
+					priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz");
+
+	if(priv->rf_chip == RF_PSEUDO_11N)
+	{
+		priv->SetBWModeInProgress= FALSE;
+		return;
+	}
+
+	if(!priv->up)
+		return;
+
+	// Added it for 20/40 mhz switch time evaluation by guangan 070531
+	//NowL = read_nic_dword(dev, TSFR);
+	//NowH = read_nic_dword(dev, TSFR+4);
+	//BeginTime = ((u8Byte)NowH << 32) + NowL;
+
+	//3//
+	//3//<1>Set MAC register
+	//3//
+	regBwOpMode = read_nic_byte(dev, BW_OPMODE);
+	regRRSR_RSC = read_nic_byte(dev, RRSR+2);
+
+	switch(priv->CurrentChannelBW)
+	{
+		case HT_CHANNEL_WIDTH_20:
+			//if(priv->card_8192_version >= VERSION_8192S_BCUT)
+			//	write_nic_byte(dev, rFPGA0_AnalogParameter2, 0x58);
+
+			regBwOpMode |= BW_OPMODE_20MHZ;
+		       	// 2007/02/07 Mark by Emily becasue we have not verify whether this register works
+			write_nic_byte(dev, BW_OPMODE, regBwOpMode);
+			break;
+
+		case HT_CHANNEL_WIDTH_20_40:
+			//if(priv->card_8192_version >= VERSION_8192S_BCUT)
+			//	write_nic_byte(dev, rFPGA0_AnalogParameter2, 0x18);
+
+			regBwOpMode &= ~BW_OPMODE_20MHZ;
+        		// 2007/02/07 Mark by Emily becasue we have not verify whether this register works
+			write_nic_byte(dev, BW_OPMODE, regBwOpMode);
+			regRRSR_RSC = (regRRSR_RSC&0x90) |(priv->nCur40MhzPrimeSC<<5);
+			write_nic_byte(dev, RRSR+2, regRRSR_RSC);
+			break;
+
+		default:
+			RT_TRACE(COMP_DBG, "SetBWModeCallback8190Pci():\
+						unknown Bandwidth: %#X\n",priv->CurrentChannelBW);
+			break;
+	}
+
+	//3//
+	//3//<2>Set PHY related register
+	//3//
+	switch(priv->CurrentChannelBW)
+	{
+		/* 20 MHz channel*/
+		case HT_CHANNEL_WIDTH_20:
+			rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x0);
+			rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x0);
+
+			// Correct the tx power for CCK rate in 40M. Suggest by YN, 20071207
+			// It is set in Tx descriptor for 8192x series
+			//write_nic_dword(dev, rCCK0_TxFilter1, 0x1a1b0000);
+			//write_nic_dword(dev, rCCK0_TxFilter2, 0x090e1317);
+			//write_nic_dword(dev, rCCK0_DebugPort, 0x00000204);
+			#if 0 //LZM 090219
+			rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskDWord, 0x1a1b0000);
+			rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, 0x090e1317);
+			rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskDWord, 0x00000204);
+			rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00300000, 3);
+			#endif
+
+			if (priv->card_8192_version >= VERSION_8192S_BCUT)
+				write_nic_byte(dev, rFPGA0_AnalogParameter2, 0x58);
+
+
+			break;
+
+		/* 40 MHz channel*/
+		case HT_CHANNEL_WIDTH_20_40:
+			rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x1);
+			rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x1);
+
+			// Correct the tx power for CCK rate in 40M. Suggest by YN, 20071207
+			//write_nic_dword(dev, rCCK0_TxFilter1, 0x35360000);
+			//write_nic_dword(dev, rCCK0_TxFilter2, 0x121c252e);
+			//write_nic_dword(dev, rCCK0_DebugPort, 0x00000409);
+			#if 0 //LZM 090219
+			rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskDWord, 0x35360000);
+			rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, 0x121c252e);
+			rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskDWord, 0x00000409);
+			#endif
+
+			// Set Control channel to upper or lower. These settings are required only for 40MHz
+			rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1));
+			rtl8192_setBBreg(dev, rOFDM1_LSTF, 0xC00, priv->nCur40MhzPrimeSC);
+
+			//rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00300000, 3);
+			if (priv->card_8192_version >= VERSION_8192S_BCUT)
+				write_nic_byte(dev, rFPGA0_AnalogParameter2, 0x18);
+
+			break;
+
+		default:
+			RT_TRACE(COMP_DBG, "SetBWModeCallback8190Pci(): unknown Bandwidth: %#X\n"\
+						,priv->CurrentChannelBW);
+			break;
+
+	}
+	//Skip over setting of J-mode in BB register here. Default value is "None J mode". Emily 20070315
+
+	// Added it for 20/40 mhz switch time evaluation by guangan 070531
+	//NowL = read_nic_dword(dev, TSFR);
+	//NowH = read_nic_dword(dev, TSFR+4);
+	//EndTime = ((u8Byte)NowH << 32) + NowL;
+	//RT_TRACE(COMP_SCAN, DBG_LOUD, ("SetBWModeCallback8190Pci: time of SetBWMode = %I64d us!\n", (EndTime - BeginTime)));
+
+	//3<3>Set RF related register
+	switch( priv->rf_chip )
+	{
+		case RF_8225:
+			//PHY_SetRF8225Bandwidth(dev, priv->CurrentChannelBW);
+			break;
+
+		case RF_8256:
+			// Please implement this function in Hal8190PciPhy8256.c
+			//PHY_SetRF8256Bandwidth(dev, priv->CurrentChannelBW);
+			break;
+
+		case RF_8258:
+			// Please implement this function in Hal8190PciPhy8258.c
+			// PHY_SetRF8258Bandwidth();
+			break;
+
+		case RF_PSEUDO_11N:
+			// Do Nothing
+			break;
+
+		case RF_6052:
+			PHY_RF6052SetBandwidth(dev, priv->CurrentChannelBW);
+			break;
+		default:
+			printk("Unknown rf_chip: %d\n", priv->rf_chip);
+			break;
+	}
+
+	priv->SetBWModeInProgress= FALSE;
+
+	RT_TRACE(COMP_SWBW, "<==SetBWModeCallback8190Pci() \n" );
+}
+
+
+ /*-----------------------------------------------------------------------------
+ * Function:   SetBWMode8190Pci()
+ *
+ * Overview:  This function is export to "HalCommon" moudule
+ *
+ * Input:       	PADAPTER			Adapter
+ *			HT_CHANNEL_WIDTH	Bandwidth	//20M or 40M
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Note:		We do not take j mode into consideration now
+ *---------------------------------------------------------------------------*/
+//extern void PHY_SetBWMode8192S(	struct net_device* dev,
+//	HT_CHANNEL_WIDTH	Bandwidth,	// 20M or 40M
+//	HT_EXTCHNL_OFFSET	Offset		// Upper, Lower, or Don't care
+void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH	Bandwidth, HT_EXTCHNL_OFFSET Offset)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	HT_CHANNEL_WIDTH tmpBW = priv->CurrentChannelBW;
+
+
+	// Modified it for 20/40 mhz switch by guangan 070531
+
+	//return;
+
+	//if(priv->SwChnlInProgress)
+//	if(pMgntInfo->bScanInProgress)
+//	{
+//		RT_TRACE(COMP_SCAN, DBG_LOUD, ("SetBWMode8190Pci() %s Exit because bScanInProgress!\n",
+//					Bandwidth == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz"));
+//		return;
+//	}
+
+//	if(priv->SetBWModeInProgress)
+//	{
+//		// Modified it for 20/40 mhz switch by guangan 070531
+//		RT_TRACE(COMP_SCAN, DBG_LOUD, ("SetBWMode8190Pci() %s cancel last timer because SetBWModeInProgress!\n",
+//					Bandwidth == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz"));
+//		PlatformCancelTimer(dev, &priv->SetBWModeTimer);
+//		//return;
+//	}
+
+	if(priv->SetBWModeInProgress)
+		return;
+
+	priv->SetBWModeInProgress= TRUE;
+
+	priv->CurrentChannelBW = Bandwidth;
+
+	if(Offset==HT_EXTCHNL_OFFSET_LOWER)
+		priv->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_UPPER;
+	else if(Offset==HT_EXTCHNL_OFFSET_UPPER)
+		priv->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_LOWER;
+	else
+		priv->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
+
+#if 0
+	if(!priv->bDriverStopped)
+	{
+#ifdef USE_WORKITEM
+		PlatformScheduleWorkItem(&(priv->SetBWModeWorkItem));//SetBWModeCallback8192SUsbWorkItem
+#else
+		PlatformSetTimer(dev, &(priv->SetBWModeTimer), 0);//PHY_SetBWModeCallback8192S
+#endif
+	}
+#endif
+	if((priv->up) )// && !(RT_CANNOT_IO(Adapter) && Adapter->bInSetPower) )
+	{
+#ifdef RTL8192SE
+	PHY_SetBWModeCallback8192S(dev);
+#elif defined(RTL8192SU)
+	SetBWModeCallback8192SUsbWorkItem(dev);
+#endif
+	}
+	else
+	{
+		RT_TRACE(COMP_SCAN, "PHY_SetBWMode8192S() SetBWModeInProgress FALSE driver sleep or unload\n");
+		priv->SetBWModeInProgress= FALSE;
+		priv->CurrentChannelBW = tmpBW;
+	}
+}
+
+//    use in phy only (in win it's timer)
+void PHY_SwChnlCallback8192S(struct net_device *dev)
+{
+
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u32		delay;
+	//bool			ret;
+
+	RT_TRACE(COMP_CH, "==>SwChnlCallback8190Pci(), switch to channel %d\n", priv->chan);
+
+	if(!priv->up)
+		return;
+
+	if(priv->rf_chip == RF_PSEUDO_11N)
+	{
+		priv->SwChnlInProgress=FALSE;
+		return; 								//return immediately if it is peudo-phy
+	}
+
+	do{
+		if(!priv->SwChnlInProgress)
+			break;
+
+		//if(!phy_SwChnlStepByStep(dev, priv->CurrentChannel, &priv->SwChnlStage, &priv->SwChnlStep, &delay))
+		if(!phy_SwChnlStepByStep(dev, priv->chan, &priv->SwChnlStage, &priv->SwChnlStep, &delay))
+		{
+			if(delay>0)
+			{
+				mdelay(delay);
+				//PlatformSetTimer(dev, &priv->SwChnlTimer, delay);
+				//mod_timer(&priv->SwChnlTimer,  jiffies + MSECS(delay));
+				//==>PHY_SwChnlCallback8192S(dev); for 92se
+				//==>SwChnlCallback8192SUsb(dev) for 92su
+			}
+			else
+			continue;
+		}
+		else
+		{
+			priv->SwChnlInProgress=FALSE;
+			break;
+		}
+	}while(true);
+}
+
+// Call after initialization
+//extern void PHY_SwChnl8192S(struct net_device* dev,	u8 channel)
+u8 rtl8192_phy_SwChnl(struct net_device* dev, u8 channel)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	//u8 			tmpchannel =channel;
+	//bool			bResult = false;
+
+        if(!priv->up)
+		return false;
+
+	if(priv->SwChnlInProgress)
+		return false;
+
+	if(priv->SetBWModeInProgress)
+		return false;
+
+	//--------------------------------------------
+	switch(priv->ieee80211->mode)
+	{
+	case WIRELESS_MODE_A:
+	case WIRELESS_MODE_N_5G:
+		if (channel<=14){
+			RT_TRACE(COMP_ERR, "WIRELESS_MODE_A but channel<=14");
+			return false;
+		}
+		break;
+
+	case WIRELESS_MODE_B:
+		if (channel>14){
+			RT_TRACE(COMP_ERR, "WIRELESS_MODE_B but channel>14");
+			return false;
+		}
+		break;
+
+	case WIRELESS_MODE_G:
+	case WIRELESS_MODE_N_24G:
+		if (channel>14){
+			RT_TRACE(COMP_ERR, "WIRELESS_MODE_G but channel>14");
+			return false;
+		}
+		break;
+
+	default:
+			;//RT_TRACE(COMP_ERR, "Invalid WirelessMode(%#x)!!\n", priv->ieee80211->mode);
+		break;
+	}
+	//--------------------------------------------
+
+	priv->SwChnlInProgress = TRUE;
+	if( channel == 0)
+		channel = 1;
+
+	priv->chan=channel;
+
+	priv->SwChnlStage=0;
+	priv->SwChnlStep=0;
+
+	if((priv->up))// && !(RT_CANNOT_IO(Adapter) && Adapter->bInSetPower))
+	{
+#ifdef RTL8192SE
+	PHY_SwChnlCallback8192S(dev);
+#elif defined(RTL8192SU)
+	SwChnlCallback8192SUsbWorkItem(dev);
+#endif
+#ifdef TO_DO_LIST
+	if(bResult)
+		{
+			RT_TRACE(COMP_SCAN, "PHY_SwChnl8192S SwChnlInProgress TRUE schdule workitem done\n");
+		}
+		else
+		{
+			RT_TRACE(COMP_SCAN, "PHY_SwChnl8192S SwChnlInProgress FALSE schdule workitem error\n");
+			priv->SwChnlInProgress = false;
+			priv->CurrentChannel = tmpchannel;
+		}
+#endif
+	}
+	else
+	{
+		RT_TRACE(COMP_SCAN, "PHY_SwChnl8192S SwChnlInProgress FALSE driver sleep or unload\n");
+		priv->SwChnlInProgress = false;
+		//priv->CurrentChannel = tmpchannel;
+	}
+        return true;
+}
+
+
+//
+// Description:
+//	Switch channel synchronously. Called by SwChnlByDelayHandler.
+//
+// Implemented by Bruce, 2008-02-14.
+// The following procedure is operted according to SwChanlCallback8190Pci().
+// However, this procedure is performed synchronously  which should be running under
+// passive level.
+//
+//not understant it
+void PHY_SwChnlPhy8192S(	// Only called during initialize
+	struct net_device* dev,
+	u8		channel
+	)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	RT_TRACE(COMP_SCAN, "==>PHY_SwChnlPhy8192S(), switch to channel %d.\n", priv->chan);
+
+#ifdef TO_DO_LIST
+	// Cannot IO.
+	if(RT_CANNOT_IO(dev))
+		return;
+#endif
+
+	// Channel Switching is in progress.
+	if(priv->SwChnlInProgress)
+		return;
+
+	//return immediately if it is peudo-phy
+	if(priv->rf_chip == RF_PSEUDO_11N)
+	{
+		priv->SwChnlInProgress=FALSE;
+		return;
+	}
+
+	priv->SwChnlInProgress = TRUE;
+	if( channel == 0)
+		channel = 1;
+
+	priv->chan=channel;
+
+	priv->SwChnlStage = 0;
+	priv->SwChnlStep = 0;
+
+	phy_FinishSwChnlNow(dev,channel);
+
+	priv->SwChnlInProgress = FALSE;
+}
+
+//    use in phy only
+static bool
+phy_SetSwChnlCmdArray(
+	SwChnlCmd*		CmdTable,
+	u32			CmdTableIdx,
+	u32			CmdTableSz,
+	SwChnlCmdID		CmdID,
+	u32			Para1,
+	u32			Para2,
+	u32			msDelay
+	)
+{
+	SwChnlCmd* pCmd;
+
+	if(CmdTable == NULL)
+	{
+		//RT_ASSERT(FALSE, ("phy_SetSwChnlCmdArray(): CmdTable cannot be NULL.\n"));
+		return FALSE;
+	}
+	if(CmdTableIdx >= CmdTableSz)
+	{
+		//RT_ASSERT(FALSE,
+			//	("phy_SetSwChnlCmdArray(): Access invalid index, please check size of the table, CmdTableIdx:%d, CmdTableSz:%d\n",
+				//CmdTableIdx, CmdTableSz));
+		return FALSE;
+	}
+
+	pCmd = CmdTable + CmdTableIdx;
+	pCmd->CmdID = CmdID;
+	pCmd->Para1 = Para1;
+	pCmd->Para2 = Para2;
+	pCmd->msDelay = msDelay;
+
+	return TRUE;
+}
+
+//    use in phy only
+static bool
+phy_SwChnlStepByStep(
+	struct net_device* dev,
+	u8		channel,
+	u8		*stage,
+	u8		*step,
+	u32		*delay
+	)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	//PCHANNEL_ACCESS_SETTING	pChnlAccessSetting;
+	SwChnlCmd				PreCommonCmd[MAX_PRECMD_CNT];
+	u32					PreCommonCmdCnt;
+	SwChnlCmd				PostCommonCmd[MAX_POSTCMD_CNT];
+	u32					PostCommonCmdCnt;
+	SwChnlCmd				RfDependCmd[MAX_RFDEPENDCMD_CNT];
+	u32					RfDependCmdCnt;
+	SwChnlCmd				*CurrentCmd = NULL;
+	u8					eRFPath;
+
+	//RT_ASSERT((dev != NULL), ("Adapter should not be NULL\n"));
+	//RT_ASSERT(IsLegalChannel(dev, channel), ("illegal channel: %d\n", channel));
+	RT_TRACE(COMP_CH, "===========>%s(), channel:%d, stage:%d, step:%d\n", __FUNCTION__, channel, *stage, *step);
+	//RT_ASSERT((pHalData != NULL), ("pHalData should not be NULL\n"));
+#ifdef ENABLE_DOT11D
+	if (!IsLegalChannel(priv->ieee80211, channel))
+	{
+		RT_TRACE(COMP_ERR, "=============>set to illegal channel:%d\n", channel);
+		return true; //return true to tell upper caller function this channel setting is finished! Or it will in while loop.
+	}
+#endif
+
+	//pChnlAccessSetting = &Adapter->MgntInfo.Info8185.ChannelAccessSetting;
+	//RT_ASSERT((pChnlAccessSetting != NULL), ("pChnlAccessSetting should not be NULL\n"));
+
+	//for(eRFPath = RF90_PATH_A; eRFPath <priv->NumTotalRFPath; eRFPath++)
+	//for(eRFPath = 0; eRFPath <priv->NumTotalRFPath; eRFPath++)
+	//{
+		// <1> Fill up pre common command.
+	PreCommonCmdCnt = 0;
+	phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, MAX_PRECMD_CNT,
+				CmdID_SetTxPowerLevel, 0, 0, 0);
+	phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, MAX_PRECMD_CNT,
+				CmdID_End, 0, 0, 0);
+
+		// <2> Fill up post common command.
+	PostCommonCmdCnt = 0;
+
+	phy_SetSwChnlCmdArray(PostCommonCmd, PostCommonCmdCnt++, MAX_POSTCMD_CNT,
+				CmdID_End, 0, 0, 0);
+
+		// <3> Fill up RF dependent command.
+	RfDependCmdCnt = 0;
+	switch( priv->rf_chip )
+	{
+		case RF_8225:
+		if (channel < 1 || channel > 14)
+			RT_TRACE(COMP_ERR, "illegal channel for zebra:%d\n", channel);
+		//RT_ASSERT((channel >= 1 && channel <= 14), ("illegal channel for Zebra: %d\n", channel));
+		// 2008/09/04 MH Change channel.
+		phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT,
+			CmdID_RF_WriteReg, rRfChannel, channel, 10);
+		phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT,
+		CmdID_End, 0, 0, 0);
+		break;
+
+	case RF_8256:
+		if (channel < 1 || channel > 14)
+			RT_TRACE(COMP_ERR, "illegal channel for zebra:%d\n", channel);
+		// TEST!! This is not the table for 8256!!
+		//RT_ASSERT((channel >= 1 && channel <= 14), ("illegal channel for Zebra: %d\n", channel));
+		phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT,
+			CmdID_RF_WriteReg, rRfChannel, channel, 10);
+		phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT,
+		CmdID_End, 0, 0, 0);
+		break;
+
+	case RF_6052:
+		if (channel < 1 || channel > 14)
+			RT_TRACE(COMP_ERR, "illegal channel for zebra:%d\n", channel);
+		phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT,
+			CmdID_RF_WriteReg, RF_CHNLBW, channel, 10);
+		phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT,
+			CmdID_End, 0, 0, 0);
+		break;
+
+	case RF_8258:
+		break;
+
+	default:
+		//RT_ASSERT(FALSE, ("Unknown rf_chip: %d\n", priv->rf_chip));
+		return FALSE;
+		break;
+	}
+
+
+	do{
+		switch(*stage)
+		{
+		case 0:
+			CurrentCmd=&PreCommonCmd[*step];
+			break;
+		case 1:
+			CurrentCmd=&RfDependCmd[*step];
+			break;
+		case 2:
+			CurrentCmd=&PostCommonCmd[*step];
+			break;
+		}
+
+		if(CurrentCmd->CmdID==CmdID_End)
+		{
+			if((*stage)==2)
+			{
+				return TRUE;
+			}
+			else
+			{
+				(*stage)++;
+				(*step)=0;
+				continue;
+			}
+		}
+
+		switch(CurrentCmd->CmdID)
+		{
+		case CmdID_SetTxPowerLevel:
+			//if(priv->card_8192_version > VERSION_8190_BD)
+				PHY_SetTxPowerLevel8192S(dev,channel);
+			break;
+		case CmdID_WritePortUlong:
+			write_nic_dword(dev, CurrentCmd->Para1, CurrentCmd->Para2);
+			break;
+		case CmdID_WritePortUshort:
+			write_nic_word(dev, CurrentCmd->Para1, (u16)CurrentCmd->Para2);
+			break;
+		case CmdID_WritePortUchar:
+			write_nic_byte(dev, CurrentCmd->Para1, (u8)CurrentCmd->Para2);
+			break;
+		case CmdID_RF_WriteReg:	// Only modify channel for the register now !!!!!
+			for(eRFPath = 0; eRFPath <priv->NumTotalRFPath; eRFPath++)
+			{
+#if (defined RTL8192SE ||defined RTL8192SU )
+			// For new T65 RF 0222d register 0x18 bit 0-9 = channel number.
+				rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, 0x1f, (CurrentCmd->Para2));
+				//printk("====>%x, %x, read_back:%x\n", CurrentCmd->Para2,CurrentCmd->Para1, rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, 0x1f));
+#else
+				rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, bRFRegOffsetMask, ((CurrentCmd->Para2)<<7));
+#endif
+			}
+			break;
+                default:
+                        break;
+		}
+
+		break;
+	}while(TRUE);
+	//cosa }/*for(Number of RF paths)*/
+
+	(*delay)=CurrentCmd->msDelay;
+	(*step)++;
+	RT_TRACE(COMP_CH, "<===========%s(), channel:%d, stage:%d, step:%d\n", __FUNCTION__, channel, *stage, *step);
+	return FALSE;
+}
+
+//called PHY_SwChnlPhy8192S, SwChnlCallback8192SUsbWorkItem
+//    use in phy only
+static void
+phy_FinishSwChnlNow(	// We should not call this function directly
+	struct net_device* dev,
+	u8		channel
+		)
+{
+	struct r8192_priv 	*priv = ieee80211_priv(dev);
+	u32			delay;
+
+	while(!phy_SwChnlStepByStep(dev,channel,&priv->SwChnlStage,&priv->SwChnlStep,&delay))
+	{
+		if(delay>0)
+			mdelay(delay);
+		if(!priv->up)
+			break;
+	}
+}
+
+
+/*-----------------------------------------------------------------------------
+ * Function:	PHYCheckIsLegalRfPath8190Pci()
+ *
+ * Overview:	Check different RF type to execute legal judgement. If RF Path is illegal
+ *			We will return false.
+ *
+ * Input:		NONE
+ *
+ * Output:		NONE
+ *
+ * Return:		NONE
+ *
+ * Revised History:
+ *	When		Who		Remark
+ *	11/15/2007	MHC		Create Version 0.
+ *
+ *---------------------------------------------------------------------------*/
+ //called by rtl8192_phy_QueryRFReg, rtl8192_phy_SetRFReg, PHY_SetRFPowerState8192SUsb
+//extern	bool
+//PHY_CheckIsLegalRfPath8192S(
+//	struct net_device* dev,
+//	u32	eRFPath)
+u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device* dev, u32 eRFPath)
+{
+//	struct r8192_priv *priv = ieee80211_priv(dev);
+	bool				rtValue = TRUE;
+
+	// NOt check RF Path now.!
+#if 0
+	if (priv->rf_type == RF_1T2R && eRFPath != RF90_PATH_A)
+	{
+		rtValue = FALSE;
+	}
+	if (priv->rf_type == RF_1T2R && eRFPath != RF90_PATH_A)
+	{
+
+	}
+#endif
+	return	rtValue;
+
+}	/* PHY_CheckIsLegalRfPath8192S */
+
+
+
+/*-----------------------------------------------------------------------------
+ * Function:	PHY_IQCalibrate8192S()
+ *
+ * Overview:	After all MAC/PHY/RF is configued. We must execute IQ calibration
+ *			to improve RF EVM!!?
+ *
+ * Input:		IN	PADAPTER	pAdapter
+ *
+ * Output:		NONE
+ *
+ * Return:		NONE
+ *
+ * Revised History:
+ *	When		Who		Remark
+ *	10/07/2008	MHC		Create. Document from SD3 RFSI Jenyu.
+ *
+ *---------------------------------------------------------------------------*/
+ //called by InitializeAdapter8192SE
+void
+PHY_IQCalibrate(	struct net_device* dev)
+{
+	//struct r8192_priv 	*priv = ieee80211_priv(dev);
+	u32				i, reg;
+	u32				old_value;
+	long				X, Y, TX0[4];
+	u32				TXA[4];
+
+	// 1. Check QFN68 or 64 92S (Read from EEPROM)
+
+	//
+	// 2. QFN 68
+	//
+	// For 1T2R IQK only now !!!
+	for (i = 0; i < 10; i++)
+	{
+		// IQK
+		rtl8192_setBBreg(dev, 0xc04, bMaskDWord, 0x00a05430);
+		//PlatformStallExecution(5);
+		udelay(5);
+		rtl8192_setBBreg(dev, 0xc08, bMaskDWord, 0x000800e4);
+		udelay(5);
+		rtl8192_setBBreg(dev, 0xe28, bMaskDWord, 0x80800000);
+		udelay(5);
+		rtl8192_setBBreg(dev, 0xe40, bMaskDWord, 0x02140148);
+		udelay(5);
+		rtl8192_setBBreg(dev, 0xe44, bMaskDWord, 0x681604a2);
+		udelay(5);
+		rtl8192_setBBreg(dev, 0xe4c, bMaskDWord, 0x000028d1);
+		udelay(5);
+		rtl8192_setBBreg(dev, 0xe60, bMaskDWord, 0x0214014d);
+		udelay(5);
+		rtl8192_setBBreg(dev, 0xe64, bMaskDWord, 0x281608ba);
+		udelay(5);
+		rtl8192_setBBreg(dev, 0xe6c, bMaskDWord, 0x000028d1);
+		udelay(5);
+		rtl8192_setBBreg(dev, 0xe48, bMaskDWord, 0xfb000001);
+		udelay(5);
+		rtl8192_setBBreg(dev, 0xe48, bMaskDWord, 0xf8000001);
+		udelay(2000);
+		rtl8192_setBBreg(dev, 0xc04, bMaskDWord, 0x00a05433);
+		udelay(5);
+		rtl8192_setBBreg(dev, 0xc08, bMaskDWord, 0x000000e4);
+		udelay(5);
+		rtl8192_setBBreg(dev, 0xe28, bMaskDWord, 0x0);
+
+
+		reg = rtl8192_QueryBBReg(dev, 0xeac, bMaskDWord);
+
+		// Readback IQK value and rewrite
+		if (!(reg&(BIT27|BIT28|BIT30|BIT31)))
+		{
+			old_value = (rtl8192_QueryBBReg(dev, 0xc80, bMaskDWord) & 0x3FF);
+
+			// Calibrate init gain for A path for TX0
+			X = (rtl8192_QueryBBReg(dev, 0xe94, bMaskDWord) & 0x03FF0000)>>16;
+			TXA[RF90_PATH_A] = (X * old_value)/0x100;
+			reg = rtl8192_QueryBBReg(dev, 0xc80, bMaskDWord);
+			reg = (reg & 0xFFFFFC00) | (u32)TXA[RF90_PATH_A];
+			rtl8192_setBBreg(dev, 0xc80, bMaskDWord, reg);
+			udelay(5);
+
+			// Calibrate init gain for C path for TX0
+			Y = ( rtl8192_QueryBBReg(dev, 0xe9C, bMaskDWord) & 0x03FF0000)>>16;
+			TX0[RF90_PATH_C] = ((Y * old_value)/0x100);
+			reg = rtl8192_QueryBBReg(dev, 0xc80, bMaskDWord);
+			reg = (reg & 0xffc0ffff) |((u32) (TX0[RF90_PATH_C]&0x3F)<<16);
+			rtl8192_setBBreg(dev, 0xc80, bMaskDWord, reg);
+			reg = rtl8192_QueryBBReg(dev, 0xc94, bMaskDWord);
+			reg = (reg & 0x0fffffff) |(((Y&0x3c0)>>6)<<28);
+			rtl8192_setBBreg(dev, 0xc94, bMaskDWord, reg);
+			udelay(5);
+
+			// Calibrate RX A and B for RX0
+			reg = rtl8192_QueryBBReg(dev, 0xc14, bMaskDWord);
+			X = (rtl8192_QueryBBReg(dev, 0xea4, bMaskDWord) & 0x03FF0000)>>16;
+			reg = (reg & 0xFFFFFC00) |X;
+			rtl8192_setBBreg(dev, 0xc14, bMaskDWord, reg);
+			Y = (rtl8192_QueryBBReg(dev, 0xeac, bMaskDWord) & 0x003F0000)>>16;
+			reg = (reg & 0xFFFF03FF) |Y<<10;
+			rtl8192_setBBreg(dev, 0xc14, bMaskDWord, reg);
+			udelay(5);
+			old_value = (rtl8192_QueryBBReg(dev, 0xc88, bMaskDWord) & 0x3FF);
+
+			// Calibrate init gain for A path for TX1 !!!!!!
+			X = (rtl8192_QueryBBReg(dev, 0xeb4, bMaskDWord) & 0x03FF0000)>>16;
+			reg = rtl8192_QueryBBReg(dev, 0xc88, bMaskDWord);
+			TXA[RF90_PATH_A] = (X * old_value) / 0x100;
+			reg = (reg & 0xFFFFFC00) | TXA[RF90_PATH_A];
+			rtl8192_setBBreg(dev, 0xc88, bMaskDWord, reg);
+			udelay(5);
+
+			// Calibrate init gain for C path for TX1
+			Y = (rtl8192_QueryBBReg(dev, 0xebc, bMaskDWord)& 0x03FF0000)>>16;
+			TX0[RF90_PATH_C] = ((Y * old_value)/0x100);
+			reg = rtl8192_QueryBBReg(dev, 0xc88, bMaskDWord);
+			reg = (reg & 0xffc0ffff) |( (TX0[RF90_PATH_C]&0x3F)<<16);
+			rtl8192_setBBreg(dev, 0xc88, bMaskDWord, reg);
+			reg = rtl8192_QueryBBReg(dev, 0xc9c, bMaskDWord);
+			reg = (reg & 0x0fffffff) |(((Y&0x3c0)>>6)<<28);
+			rtl8192_setBBreg(dev, 0xc9c, bMaskDWord, reg);
+			udelay(5);
+
+			// Calibrate RX A and B for RX1
+			reg = rtl8192_QueryBBReg(dev, 0xc1c, bMaskDWord);
+			X = (rtl8192_QueryBBReg(dev, 0xec4, bMaskDWord) & 0x03FF0000)>>16;
+			reg = (reg & 0xFFFFFC00) |X;
+			rtl8192_setBBreg(dev, 0xc1c, bMaskDWord, reg);
+
+			Y = (rtl8192_QueryBBReg(dev, 0xecc, bMaskDWord) & 0x003F0000)>>16;
+			reg = (reg & 0xFFFF03FF) |Y<<10;
+			rtl8192_setBBreg(dev, 0xc1c, bMaskDWord, reg);
+			udelay(5);
+
+			RT_TRACE(COMP_INIT, "PHY_IQCalibrate OK\n");
+			break;
+		}
+
+	}
+
+
+	//
+	// 3. QFN64. Not enabled now !!! We must use different gain table for 1T2R.
+	//
+
+
+}
+
+/*-----------------------------------------------------------------------------
+ * Function:	PHY_IQCalibrateBcut()
+ *
+ * Overview:	After all MAC/PHY/RF is configued. We must execute IQ calibration
+ *			to improve RF EVM!!?
+ *
+ * Input:		IN	PADAPTER	pAdapter
+ *
+ * Output:		NONE
+ *
+ * Return:		NONE
+ *
+ * Revised History:
+ *	When		Who		Remark
+ *	11/18/2008	MHC		Create. Document from SD3 RFSI Jenyu.
+ *						92S B-cut QFN 68 pin IQ calibration procedure.doc
+ *
+ *---------------------------------------------------------------------------*/
+extern void PHY_IQCalibrateBcut(struct net_device* dev)
+{
+	//struct r8192_priv 	*priv = ieee80211_priv(dev);
+	//PMGNT_INFO		pMgntInfo = &pAdapter->MgntInfo;
+	u32				i, reg;
+	u32				old_value;
+	long				X, Y, TX0[4];
+	u32				TXA[4];
+	u32				calibrate_set[13] = {0};
+	u32				load_value[13];
+	u8				RfPiEnable=0;
+
+	// 0. Check QFN68 or 64 92S (Read from EEPROM/EFUSE)
+
+	//
+	// 1. Save e70~ee0 register setting, and load calibration setting
+	//
+	/*
+	0xee0[31:0]=0x3fed92fb;
+	0xedc[31:0] =0x3fed92fb;
+	0xe70[31:0] =0x3fed92fb;
+	0xe74[31:0] =0x3fed92fb;
+	0xe78[31:0] =0x3fed92fb;
+	0xe7c[31:0]= 0x3fed92fb;
+	0xe80[31:0]= 0x3fed92fb;
+	0xe84[31:0]= 0x3fed92fb;
+	0xe88[31:0]= 0x3fed92fb;
+	0xe8c[31:0]= 0x3fed92fb;
+	0xed0[31:0]= 0x3fed92fb;
+	0xed4[31:0]= 0x3fed92fb;
+	0xed8[31:0]= 0x3fed92fb;
+	*/
+	calibrate_set [0] = 0xee0;
+	calibrate_set [1] = 0xedc;
+	calibrate_set [2] = 0xe70;
+	calibrate_set [3] = 0xe74;
+	calibrate_set [4] = 0xe78;
+	calibrate_set [5] = 0xe7c;
+	calibrate_set [6] = 0xe80;
+	calibrate_set [7] = 0xe84;
+	calibrate_set [8] = 0xe88;
+	calibrate_set [9] = 0xe8c;
+	calibrate_set [10] = 0xed0;
+	calibrate_set [11] = 0xed4;
+	calibrate_set [12] = 0xed8;
+	//RT_TRACE(COMP_INIT, DBG_LOUD, ("Save e70~ee0 register setting\n"));
+	for (i = 0; i < 13; i++)
+	{
+		load_value[i] = rtl8192_QueryBBReg(dev, calibrate_set[i], bMaskDWord);
+		rtl8192_setBBreg(dev, calibrate_set[i], bMaskDWord, 0x3fed92fb);
+
+	}
+
+	RfPiEnable = (u8)rtl8192_QueryBBReg(dev, rFPGA0_XA_HSSIParameter1, BIT8);
+
+	//
+	// 2. QFN 68
+	//
+	// For 1T2R IQK only now !!!
+	for (i = 0; i < 10; i++)
+	{
+		RT_TRACE(COMP_INIT, "IQK -%d\n", i);
+		//BB switch to PI mode. If default is PI mode, ignoring 2 commands below.
+		if (!RfPiEnable)	//if original is SI mode, then switch to PI mode.
+		{
+			//DbgPrint("IQK Switch to PI mode\n");
+			rtl8192_setBBreg(dev, 0x820, bMaskDWord, 0x01000100);
+			rtl8192_setBBreg(dev, 0x828, bMaskDWord, 0x01000100);
+		}
+
+		// IQK
+		// 2. IQ calibration & LO leakage calibration
+		rtl8192_setBBreg(dev, 0xc04, bMaskDWord, 0x00a05430);
+		udelay(5);
+		rtl8192_setBBreg(dev, 0xc08, bMaskDWord, 0x000800e4);
+		udelay(5);
+		rtl8192_setBBreg(dev, 0xe28, bMaskDWord, 0x80800000);
+		udelay(5);
+		//path-A IQ K and LO K gain setting
+		rtl8192_setBBreg(dev, 0xe40, bMaskDWord, 0x02140102);
+		udelay(5);
+		rtl8192_setBBreg(dev, 0xe44, bMaskDWord, 0x681604c2);
+		udelay(5);
+		//set LO calibration
+		rtl8192_setBBreg(dev, 0xe4c, bMaskDWord, 0x000028d1);
+		udelay(5);
+		//path-B IQ K and LO K gain setting
+		rtl8192_setBBreg(dev, 0xe60, bMaskDWord, 0x02140102);
+		udelay(5);
+		rtl8192_setBBreg(dev, 0xe64, bMaskDWord, 0x28160d05);
+		udelay(5);
+		//K idac_I & IQ
+		rtl8192_setBBreg(dev, 0xe48, bMaskDWord, 0xfb000000);
+		udelay(5);
+		rtl8192_setBBreg(dev, 0xe48, bMaskDWord, 0xf8000000);
+		udelay(5);
+
+		// delay 2ms
+		udelay(2000);
+
+		//idac_Q setting
+		rtl8192_setBBreg(dev, 0xe6c, bMaskDWord, 0x020028d1);
+		udelay(5);
+		//K idac_Q & IQ
+		rtl8192_setBBreg(dev, 0xe48, bMaskDWord, 0xfb000000);
+		udelay(5);
+		rtl8192_setBBreg(dev, 0xe48, bMaskDWord, 0xf8000000);
+
+		// delay 2ms
+		udelay(2000);
+
+		rtl8192_setBBreg(dev, 0xc04, bMaskDWord, 0x00a05433);
+		udelay(5);
+		rtl8192_setBBreg(dev, 0xc08, bMaskDWord, 0x000000e4);
+		udelay(5);
+		rtl8192_setBBreg(dev, 0xe28, bMaskDWord, 0x0);
+
+		if (!RfPiEnable)	//if original is SI mode, then switch to PI mode.
+		{
+			//DbgPrint("IQK Switch back to SI mode\n");
+			rtl8192_setBBreg(dev, 0x820, bMaskDWord, 0x01000000);
+			rtl8192_setBBreg(dev, 0x828, bMaskDWord, 0x01000000);
+		}
+
+
+		reg = rtl8192_QueryBBReg(dev, 0xeac, bMaskDWord);
+
+		// 3.	check fail bit, and fill BB IQ matrix
+		// Readback IQK value and rewrite
+		if (!(reg&(BIT27|BIT28|BIT30|BIT31)))
+		{
+			old_value = (rtl8192_QueryBBReg(dev, 0xc80, bMaskDWord) & 0x3FF);
+
+			// Calibrate init gain for A path for TX0
+			X = (rtl8192_QueryBBReg(dev, 0xe94, bMaskDWord) & 0x03FF0000)>>16;
+			TXA[RF90_PATH_A] = (X * old_value)/0x100;
+			reg = rtl8192_QueryBBReg(dev, 0xc80, bMaskDWord);
+			reg = (reg & 0xFFFFFC00) | (u32)TXA[RF90_PATH_A];
+			rtl8192_setBBreg(dev, 0xc80, bMaskDWord, reg);
+			udelay(5);
+
+			// Calibrate init gain for C path for TX0
+			Y = ( rtl8192_QueryBBReg(dev, 0xe9C, bMaskDWord) & 0x03FF0000)>>16;
+			TX0[RF90_PATH_C] = ((Y * old_value)/0x100);
+			reg = rtl8192_QueryBBReg(dev, 0xc80, bMaskDWord);
+			reg = (reg & 0xffc0ffff) |((u32) (TX0[RF90_PATH_C]&0x3F)<<16);
+			rtl8192_setBBreg(dev, 0xc80, bMaskDWord, reg);
+			reg = rtl8192_QueryBBReg(dev, 0xc94, bMaskDWord);
+			reg = (reg & 0x0fffffff) |(((Y&0x3c0)>>6)<<28);
+			rtl8192_setBBreg(dev, 0xc94, bMaskDWord, reg);
+			udelay(5);
+
+			// Calibrate RX A and B for RX0
+			reg = rtl8192_QueryBBReg(dev, 0xc14, bMaskDWord);
+			X = (rtl8192_QueryBBReg(dev, 0xea4, bMaskDWord) & 0x03FF0000)>>16;
+			reg = (reg & 0xFFFFFC00) |X;
+			rtl8192_setBBreg(dev, 0xc14, bMaskDWord, reg);
+			Y = (rtl8192_QueryBBReg(dev, 0xeac, bMaskDWord) & 0x003F0000)>>16;
+			reg = (reg & 0xFFFF03FF) |Y<<10;
+			rtl8192_setBBreg(dev, 0xc14, bMaskDWord, reg);
+			udelay(5);
+			old_value = (rtl8192_QueryBBReg(dev, 0xc88, bMaskDWord) & 0x3FF);
+
+			// Calibrate init gain for A path for TX1 !!!!!!
+			X = (rtl8192_QueryBBReg(dev, 0xeb4, bMaskDWord) & 0x03FF0000)>>16;
+			reg = rtl8192_QueryBBReg(dev, 0xc88, bMaskDWord);
+			TXA[RF90_PATH_A] = (X * old_value) / 0x100;
+			reg = (reg & 0xFFFFFC00) | TXA[RF90_PATH_A];
+			rtl8192_setBBreg(dev, 0xc88, bMaskDWord, reg);
+			udelay(5);
+
+			// Calibrate init gain for C path for TX1
+			Y = (rtl8192_QueryBBReg(dev, 0xebc, bMaskDWord)& 0x03FF0000)>>16;
+			TX0[RF90_PATH_C] = ((Y * old_value)/0x100);
+			reg = rtl8192_QueryBBReg(dev, 0xc88, bMaskDWord);
+			reg = (reg & 0xffc0ffff) |( (TX0[RF90_PATH_C]&0x3F)<<16);
+			rtl8192_setBBreg(dev, 0xc88, bMaskDWord, reg);
+			reg = rtl8192_QueryBBReg(dev, 0xc9c, bMaskDWord);
+			reg = (reg & 0x0fffffff) |(((Y&0x3c0)>>6)<<28);
+			rtl8192_setBBreg(dev, 0xc9c, bMaskDWord, reg);
+			udelay(5);
+
+			// Calibrate RX A and B for RX1
+			reg = rtl8192_QueryBBReg(dev, 0xc1c, bMaskDWord);
+			X = (rtl8192_QueryBBReg(dev, 0xec4, bMaskDWord) & 0x03FF0000)>>16;
+			reg = (reg & 0xFFFFFC00) |X;
+			rtl8192_setBBreg(dev, 0xc1c, bMaskDWord, reg);
+
+			Y = (rtl8192_QueryBBReg(dev, 0xecc, bMaskDWord) & 0x003F0000)>>16;
+			reg = (reg & 0xFFFF03FF) |Y<<10;
+			rtl8192_setBBreg(dev, 0xc1c, bMaskDWord, reg);
+			udelay(5);
+
+			RT_TRACE(COMP_INIT, "PHY_IQCalibrate OK\n");
+			break;
+		}
+
+	}
+
+	//
+	// 4. Reload e70~ee0 register setting.
+	//
+	//RT_TRACE(COMP_INIT, DBG_LOUD, ("Reload e70~ee0 register setting.\n"));
+	for (i = 0; i < 13; i++)
+		rtl8192_setBBreg(dev, calibrate_set[i], bMaskDWord, load_value[i]);
+
+
+	//
+	// 3. QFN64. Not enabled now !!! We must use different gain table for 1T2R.
+	//
+
+
+
+}	// PHY_IQCalibrateBcut
+
+
+//
+// Move from phycfg.c to gen.c to be code independent later
+//
+//-------------------------Move to other DIR later----------------------------*/
+//#if (DEV_BUS_TYPE == USB_INTERFACE)
+#ifdef RTL8192SU
+
+//    use in phy only (in win it's timer)
+void SwChnlCallback8192SUsb(struct net_device *dev)
+{
+
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u32			delay;
+//	bool			ret;
+
+	RT_TRACE(COMP_SCAN, "==>SwChnlCallback8190Pci(), switch to channel\
+				%d\n", priv->chan);
+
+
+	if(!priv->up)
+		return;
+
+	if(priv->rf_chip == RF_PSEUDO_11N)
+	{
+		priv->SwChnlInProgress=FALSE;
+		return; 								//return immediately if it is peudo-phy
+	}
+
+	do{
+		if(!priv->SwChnlInProgress)
+			break;
+
+		if(!phy_SwChnlStepByStep(dev, priv->chan, &priv->SwChnlStage, &priv->SwChnlStep, &delay))
+		{
+			if(delay>0)
+			{
+				//PlatformSetTimer(dev, &priv->SwChnlTimer, delay);
+
+			}
+			else
+			continue;
+		}
+		else
+		{
+			priv->SwChnlInProgress=FALSE;
+		}
+		break;
+	}while(TRUE);
+}
+
+
+//
+// Callback routine of the work item for switch channel.
+//
+//    use in phy only (in win it's work)
+void SwChnlCallback8192SUsbWorkItem(struct net_device *dev )
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	RT_TRACE(COMP_TRACE, "==> SwChnlCallback8192SUsbWorkItem()\n");
+#ifdef TO_DO_LIST
+	if(pAdapter->bInSetPower && RT_USB_CANNOT_IO(pAdapter))
+	{
+		RT_TRACE(COMP_SCAN, DBG_LOUD, ("<== SwChnlCallback8192SUsbWorkItem() SwChnlInProgress FALSE driver sleep or unload\n"));
+
+		pHalData->SwChnlInProgress = FALSE;
+		return;
+	}
+#endif
+	phy_FinishSwChnlNow(dev, priv->chan);
+	priv->SwChnlInProgress = FALSE;
+
+	RT_TRACE(COMP_TRACE, "<== SwChnlCallback8192SUsbWorkItem()\n");
+}
+
+
+/*-----------------------------------------------------------------------------
+ * Function:    SetBWModeCallback8192SUsb()
+ *
+ * Overview:    Timer callback function for SetSetBWMode
+ *
+ * Input:       	PRT_TIMER		pTimer
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Note:		(1) We do not take j mode into consideration now
+ *			(2) Will two workitem of "switch channel" and "switch channel bandwidth" run
+ *			     concurrently?
+ *---------------------------------------------------------------------------*/
+//====>//rtl8192_SetBWMode
+//    use in phy only (in win it's timer)
+void SetBWModeCallback8192SUsb(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u8	 			regBwOpMode;
+
+	// Added it for 20/40 mhz switch time evaluation by guangan 070531
+	//u32				NowL, NowH;
+	//u8Byte				BeginTime, EndTime;
+	u8				regRRSR_RSC;
+
+	RT_TRACE(COMP_SCAN, "==>SetBWModeCallback8190Pci()  Switch to %s bandwidth\n", \
+					priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz");
+
+	if(priv->rf_chip == RF_PSEUDO_11N)
+	{
+		priv->SetBWModeInProgress= FALSE;
+		return;
+	}
+
+	if(!priv->up)
+		return;
+
+	// Added it for 20/40 mhz switch time evaluation by guangan 070531
+	//NowL = read_nic_dword(dev, TSFR);
+	//NowH = read_nic_dword(dev, TSFR+4);
+	//BeginTime = ((u8Byte)NowH << 32) + NowL;
+
+	//3<1>Set MAC register
+	regBwOpMode = read_nic_byte(dev, BW_OPMODE);
+	regRRSR_RSC = read_nic_byte(dev, RRSR+2);
+
+	switch(priv->CurrentChannelBW)
+	{
+		case HT_CHANNEL_WIDTH_20:
+			regBwOpMode |= BW_OPMODE_20MHZ;
+		       // 2007/02/07 Mark by Emily becasue we have not verify whether this register works
+			write_nic_byte(dev, BW_OPMODE, regBwOpMode);
+			break;
+
+		case HT_CHANNEL_WIDTH_20_40:
+			regBwOpMode &= ~BW_OPMODE_20MHZ;
+        		// 2007/02/07 Mark by Emily becasue we have not verify whether this register works
+			write_nic_byte(dev, BW_OPMODE, regBwOpMode);
+
+			regRRSR_RSC = (regRRSR_RSC&0x90) |(priv->nCur40MhzPrimeSC<<5);
+			write_nic_byte(dev, RRSR+2, regRRSR_RSC);
+			break;
+
+		default:
+			RT_TRACE(COMP_DBG, "SetChannelBandwidth8190Pci():\
+						unknown Bandwidth: %#X\n",priv->CurrentChannelBW);
+			break;
+	}
+
+	//3 <2>Set PHY related register
+	switch(priv->CurrentChannelBW)
+	{
+		case HT_CHANNEL_WIDTH_20:
+			rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x0);
+			rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x0);
+			#if 0 //LZM090219
+			rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00300000, 3);
+
+			// Correct the tx power for CCK rate in 20M. Suggest by YN, 20071207
+			//write_nic_dword(dev, rCCK0_TxFilter1, 0x1a1b0000);
+			//write_nic_dword(dev, rCCK0_TxFilter2, 0x090e1317);
+			//write_nic_dword(dev, rCCK0_DebugPort, 0x00000204);
+			rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskDWord, 0x1a1b0000);
+			rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, 0x090e1317);
+			rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskDWord, 0x00000204);
+			rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00300000, 3);
+			#endif
+
+			if (priv->card_8192_version >= VERSION_8192S_BCUT)
+				rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0xff, 0x58);
+
+			break;
+		case HT_CHANNEL_WIDTH_20_40:
+			rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x1);
+			rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x1);
+			rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1));
+			rtl8192_setBBreg(dev, rOFDM1_LSTF, 0xC00, priv->nCur40MhzPrimeSC);
+
+			// Correct the tx power for CCK rate in 40M. Suggest by YN, 20071207
+			//PHY_SetBBReg(Adapter, rCCK0_TxFilter1, bMaskDWord, 0x35360000);
+			//PHY_SetBBReg(Adapter, rCCK0_TxFilter2, bMaskDWord, 0x121c252e);
+			//PHY_SetBBReg(Adapter, rCCK0_DebugPort, bMaskDWord, 0x00000409);
+			//PHY_SetBBReg(Adapter, rFPGA0_AnalogParameter1, bADClkPhase, 0);
+
+			if (priv->card_8192_version >= VERSION_8192S_BCUT)
+				rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0xff, 0x18);
+
+			break;
+		default:
+			RT_TRACE(COMP_DBG, "SetChannelBandwidth8190Pci(): unknown Bandwidth: %#X\n"\
+						,priv->CurrentChannelBW);
+			break;
+
+	}
+	//Skip over setting of J-mode in BB register here. Default value is "None J mode". Emily 20070315
+
+	// Added it for 20/40 mhz switch time evaluation by guangan 070531
+	//NowL = read_nic_dword(dev, TSFR);
+	//NowH = read_nic_dword(dev, TSFR+4);
+	//EndTime = ((u8Byte)NowH << 32) + NowL;
+	//RT_TRACE(COMP_SCAN, DBG_LOUD, ("SetBWModeCallback8190Pci: time of SetBWMode = %I64d us!\n", (EndTime - BeginTime)));
+
+#if 1
+	//3<3>Set RF related register
+	switch( priv->rf_chip )
+	{
+		case RF_8225:
+			PHY_SetRF8225Bandwidth(dev, priv->CurrentChannelBW);
+			break;
+
+		case RF_8256:
+			// Please implement this function in Hal8190PciPhy8256.c
+			//PHY_SetRF8256Bandwidth(dev, priv->CurrentChannelBW);
+			break;
+
+		case RF_6052:
+			PHY_RF6052SetBandwidth(dev, priv->CurrentChannelBW);
+			break;
+
+		case RF_8258:
+			// Please implement this function in Hal8190PciPhy8258.c
+			// PHY_SetRF8258Bandwidth();
+			break;
+
+		case RF_PSEUDO_11N:
+			// Do Nothing
+			break;
+
+		default:
+			//RT_ASSERT(FALSE, ("Unknown rf_chip: %d\n", priv->rf_chip));
+			break;
+	}
+#endif
+	priv->SetBWModeInProgress= FALSE;
+
+	RT_TRACE(COMP_SCAN, "<==SetBWMode8190Pci()" );
+}
+
+//
+// Callback routine of the work item for set bandwidth mode.
+//
+//    use in phy only (in win it's work)
+void SetBWModeCallback8192SUsbWorkItem(struct net_device *dev)
+{
+	struct r8192_priv 		*priv = ieee80211_priv(dev);
+	u8	 			regBwOpMode;
+
+	// Added it for 20/40 mhz switch time evaluation by guangan 070531
+	//u32				NowL, NowH;
+	//u8Byte				BeginTime, EndTime;
+	u8			regRRSR_RSC;
+
+	RT_TRACE(COMP_SCAN, "==>SetBWModeCallback8192SUsbWorkItem()  Switch to %s bandwidth\n", \
+					priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz");
+
+	if(priv->rf_chip == RF_PSEUDO_11N)
+	{
+		priv->SetBWModeInProgress= FALSE;
+		return;
+	}
+
+	if(!priv->up)
+		return;
+
+	// Added it for 20/40 mhz switch time evaluation by guangan 070531
+	//NowL = read_nic_dword(dev, TSFR);
+	//NowH = read_nic_dword(dev, TSFR+4);
+	//BeginTime = ((u8Byte)NowH << 32) + NowL;
+
+	//3<1>Set MAC register
+	regBwOpMode = read_nic_byte(dev, BW_OPMODE);
+	regRRSR_RSC = read_nic_byte(dev, RRSR+2);
+
+	switch(priv->CurrentChannelBW)
+	{
+		case HT_CHANNEL_WIDTH_20:
+			regBwOpMode |= BW_OPMODE_20MHZ;
+		       // 2007/02/07 Mark by Emily becasue we have not verify whether this register works
+			write_nic_byte(dev, BW_OPMODE, regBwOpMode);
+			break;
+
+		case HT_CHANNEL_WIDTH_20_40:
+			regBwOpMode &= ~BW_OPMODE_20MHZ;
+        		// 2007/02/07 Mark by Emily becasue we have not verify whether this register works
+			write_nic_byte(dev, BW_OPMODE, regBwOpMode);
+			regRRSR_RSC = (regRRSR_RSC&0x90) |(priv->nCur40MhzPrimeSC<<5);
+			write_nic_byte(dev, RRSR+2, regRRSR_RSC);
+
+			break;
+
+		default:
+			RT_TRACE(COMP_DBG, "SetBWModeCallback8192SUsbWorkItem():\
+						unknown Bandwidth: %#X\n",priv->CurrentChannelBW);
+			break;
+	}
+
+	//3 <2>Set PHY related register
+	switch(priv->CurrentChannelBW)
+	{
+		case HT_CHANNEL_WIDTH_20:
+			rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x0);
+			rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x0);
+
+			#if 0 //LZM 090219
+			rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, bADClkPhase, 1);
+
+			// Correct the tx power for CCK rate in 20M. Suggest by YN, 20071207
+			rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskDWord, 0x1a1b0000);
+			rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, 0x090e1317);
+			rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskDWord, 0x00000204);
+			rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 1);
+			#endif
+
+			rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0xff, 0x58);
+
+			break;
+		case HT_CHANNEL_WIDTH_20_40:
+			rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x1);
+			rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x1);
+			#if 0 //LZM 090219
+			rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1));
+
+			rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, bADClkPhase, 0);
+
+   			rtl8192_setBBreg(dev, rOFDM1_LSTF, 0xC00, priv->nCur40MhzPrimeSC);
+			// Correct the tx power for CCK rate in 40M. Suggest by YN, 20071207
+			rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskDWord, 0x35360000);
+			rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, 0x121c252e);
+			rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskDWord, 0x00000409);
+			#endif
+
+			// Set Control channel to upper or lower. These settings are required only for 40MHz
+			rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1));
+			rtl8192_setBBreg(dev, rOFDM1_LSTF, 0xC00, priv->nCur40MhzPrimeSC);
+
+			rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0xff, 0x18);
+
+			break;
+
+
+		default:
+			RT_TRACE(COMP_DBG, "SetBWModeCallback8192SUsbWorkItem(): unknown Bandwidth: %#X\n"\
+						,priv->CurrentChannelBW);
+			break;
+
+	}
+	//Skip over setting of J-mode in BB register here. Default value is "None J mode". Emily 20070315
+
+	//3<3>Set RF related register
+	switch( priv->rf_chip )
+	{
+		case RF_8225:
+			PHY_SetRF8225Bandwidth(dev, priv->CurrentChannelBW);
+			break;
+
+		case RF_8256:
+			// Please implement this function in Hal8190PciPhy8256.c
+			//PHY_SetRF8256Bandwidth(dev, priv->CurrentChannelBW);
+			break;
+
+		case RF_6052:
+			PHY_RF6052SetBandwidth(dev, priv->CurrentChannelBW);
+			break;
+
+		case RF_8258:
+			// Please implement this function in Hal8190PciPhy8258.c
+			// PHY_SetRF8258Bandwidth();
+			break;
+
+		case RF_PSEUDO_11N:
+			// Do Nothing
+			break;
+
+		default:
+			//RT_ASSERT(FALSE, ("Unknown rf_chip: %d\n", priv->rf_chip));
+			break;
+	}
+
+	priv->SetBWModeInProgress= FALSE;
+
+	RT_TRACE(COMP_SCAN, "<==SetBWModeCallback8192SUsbWorkItem()" );
+}
+
+//--------------------------Move to oter DIR later-------------------------------*/
+#ifdef RTL8192SU
+void InitialGain8192S(struct net_device *dev,	u8 Operation)
+{
+#ifdef TO_DO_LIST
+	struct r8192_priv *priv = ieee80211_priv(dev);
+#endif
+
+}
+#endif
+
+void InitialGain819xUsb(struct net_device *dev,	u8 Operation)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	priv->InitialGainOperateType = Operation;
+
+	if(priv->up)
+	{
+	#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+		queue_delayed_work(priv->priv_wq,&priv->initialgain_operate_wq,0);
+	#else
+		#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+		schedule_task(&priv->initialgain_operate_wq);
+		#else
+		queue_work(priv->priv_wq,&priv->initialgain_operate_wq);
+		#endif
+	#endif
+	}
+}
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+extern void InitialGainOperateWorkItemCallBack(struct work_struct *work)
+{
+	struct delayed_work *dwork = container_of(work,struct delayed_work,work);
+       struct r8192_priv *priv = container_of(dwork,struct r8192_priv,initialgain_operate_wq);
+       struct net_device *dev = priv->ieee80211->dev;
+#else
+extern void InitialGainOperateWorkItemCallBack(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+#endif
+#define SCAN_RX_INITIAL_GAIN	0x17
+#define POWER_DETECTION_TH	0x08
+	u32	BitMask;
+	u8	initial_gain;
+	u8	Operation;
+
+	Operation = priv->InitialGainOperateType;
+
+	switch(Operation)
+	{
+		case IG_Backup:
+			RT_TRACE(COMP_SCAN, "IG_Backup, backup the initial gain.\n");
+			initial_gain = SCAN_RX_INITIAL_GAIN;//priv->DefaultInitialGain[0];//
+			BitMask = bMaskByte0;
+			if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM)
+				rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8);	// FW DIG OFF
+			priv->initgain_backup.xaagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XAAGCCore1, BitMask);
+			priv->initgain_backup.xbagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XBAGCCore1, BitMask);
+			priv->initgain_backup.xcagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XCAGCCore1, BitMask);
+			priv->initgain_backup.xdagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XDAGCCore1, BitMask);
+			BitMask  = bMaskByte2;
+			priv->initgain_backup.cca		= (u8)rtl8192_QueryBBReg(dev, rCCK0_CCA, BitMask);
+
+			RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc50 is %x\n",priv->initgain_backup.xaagccore1);
+			RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc58 is %x\n",priv->initgain_backup.xbagccore1);
+			RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc60 is %x\n",priv->initgain_backup.xcagccore1);
+			RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc68 is %x\n",priv->initgain_backup.xdagccore1);
+			RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xa0a is %x\n",priv->initgain_backup.cca);
+
+			RT_TRACE(COMP_SCAN, "Write scan initial gain = 0x%x \n", initial_gain);
+			write_nic_byte(dev, rOFDM0_XAAGCCore1, initial_gain);
+			write_nic_byte(dev, rOFDM0_XBAGCCore1, initial_gain);
+			write_nic_byte(dev, rOFDM0_XCAGCCore1, initial_gain);
+			write_nic_byte(dev, rOFDM0_XDAGCCore1, initial_gain);
+			RT_TRACE(COMP_SCAN, "Write scan 0xa0a = 0x%x \n", POWER_DETECTION_TH);
+			write_nic_byte(dev, 0xa0a, POWER_DETECTION_TH);
+			break;
+		case IG_Restore:
+			RT_TRACE(COMP_SCAN, "IG_Restore, restore the initial gain.\n");
+			BitMask = 0x7f; //Bit0~ Bit6
+			if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM)
+				rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8);	// FW DIG OFF
+
+			rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, BitMask, (u32)priv->initgain_backup.xaagccore1);
+			rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, BitMask, (u32)priv->initgain_backup.xbagccore1);
+			rtl8192_setBBreg(dev, rOFDM0_XCAGCCore1, BitMask, (u32)priv->initgain_backup.xcagccore1);
+			rtl8192_setBBreg(dev, rOFDM0_XDAGCCore1, BitMask, (u32)priv->initgain_backup.xdagccore1);
+			BitMask  = bMaskByte2;
+			rtl8192_setBBreg(dev, rCCK0_CCA, BitMask, (u32)priv->initgain_backup.cca);
+
+			RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc50 is %x\n",priv->initgain_backup.xaagccore1);
+			RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc58 is %x\n",priv->initgain_backup.xbagccore1);
+			RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc60 is %x\n",priv->initgain_backup.xcagccore1);
+			RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc68 is %x\n",priv->initgain_backup.xdagccore1);
+			RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xa0a is %x\n",priv->initgain_backup.cca);
+
+			PHY_SetTxPowerLevel8192S(dev,priv->ieee80211->current_network.channel);
+
+			if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM)
+				rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1);	// FW DIG ON
+			break;
+		default:
+			RT_TRACE(COMP_SCAN, "Unknown IG Operation. \n");
+			break;
+	}
+}
+
+#endif	// #if (DEV_BUS_TYPE == USB_INTERFACE)
+
+//-----------------------------------------------------------------------------
+//	Description:
+//		Schedule workitem to send specific CMD IO to FW.
+//	Added by Roger, 2008.12.03.
+//
+//-----------------------------------------------------------------------------
+bool HalSetFwCmd8192S(struct net_device* dev, FW_CMD_IO_TYPE	FwCmdIO)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u16	FwCmdWaitCounter = 0;
+
+	u16	FwCmdWaitLimit = 1000;
+
+	//if(IS_HARDWARE_TYPE_8192SU(Adapter) && Adapter->bInHctTest)
+	if(priv->bInHctTest)
+		return true;
+
+	RT_TRACE(COMP_CMD, "-->HalSetFwCmd8192S(): Set FW Cmd(%x), SetFwCmdInProgress(%d)\n", (u32)FwCmdIO, priv->SetFwCmdInProgress);
+
+	// Will be done by high power respectively.
+	if(FwCmdIO==FW_CMD_DIG_HALT || FwCmdIO==FW_CMD_DIG_RESUME)
+	{
+		RT_TRACE(COMP_CMD, "<--HalSetFwCmd8192S(): Set FW Cmd(%x)\n", (u32)FwCmdIO);
+		return false;
+	}
+
+#if 1
+	while(priv->SetFwCmdInProgress && FwCmdWaitCounter<FwCmdWaitLimit)
+	{
+		//if(RT_USB_CANNOT_IO(Adapter))
+		//{
+		//	RT_TRACE(COMP_CMD, DBG_WARNING, ("HalSetFwCmd8192S(): USB can NOT IO!!\n"));
+		//	return FALSE;
+		//}
+
+		RT_TRACE(COMP_CMD, "HalSetFwCmd8192S(): previous workitem not finish!!\n");
+		return false;
+		FwCmdWaitCounter ++;
+		RT_TRACE(COMP_CMD, "HalSetFwCmd8192S(): Wait 10 ms (%d times)...\n", FwCmdWaitCounter);
+		udelay(100);
+	}
+
+	if(FwCmdWaitCounter == FwCmdWaitLimit)
+	{
+		//RT_ASSERT(FALSE, ("SetFwCmdIOWorkItemCallback(): Wait too logn to set FW CMD\n"));
+		RT_TRACE(COMP_CMD, "HalSetFwCmd8192S(): Wait too logn to set FW CMD\n");
+		//return false;
+	}
+#endif
+	if (priv->SetFwCmdInProgress)
+	{
+		RT_TRACE(COMP_ERR, "<--HalSetFwCmd8192S(): Set FW Cmd(%#x)\n", FwCmdIO);
+		return false;
+	}
+	priv->SetFwCmdInProgress = TRUE;
+	priv->CurrentFwCmdIO = FwCmdIO; // Update current FW Cmd for callback use.
+
+	phy_SetFwCmdIOCallback(dev);
+	return true;
+}
+void ChkFwCmdIoDone(struct net_device* dev)
+{
+	u16 PollingCnt = 1000;
+	u32 tmpValue;
+
+	do
+	{// Make sure that CMD IO has be accepted by FW.
+#ifdef TO_DO_LIST
+		if(RT_USB_CANNOT_IO(Adapter))
+		{
+			RT_TRACE(COMP_CMD, "ChkFwCmdIoDone(): USB can NOT IO!!\n");
+			return;
+		}
+#endif
+		udelay(10); // sleep 20us
+		tmpValue = read_nic_dword(dev, WFM5);
+		if(tmpValue == 0)
+		{
+			RT_TRACE(COMP_CMD, "[FW CMD] Set FW Cmd success!!\n");
+			break;
+		}
+		else
+		{
+			RT_TRACE(COMP_CMD, "[FW CMD] Polling FW Cmd PollingCnt(%d)!!\n", PollingCnt);
+		}
+	}while( --PollingCnt );
+
+	if(PollingCnt == 0)
+	{
+		RT_TRACE(COMP_ERR, "[FW CMD] Set FW Cmd fail!!\n");
+	}
+}
+// 	Callback routine of the timer callback for FW Cmd IO.
+//
+//	Description:
+//		This routine will send specific CMD IO to FW and check whether it is done.
+//
+void phy_SetFwCmdIOCallback(struct net_device* dev)
+{
+	//struct net_device* dev = (struct net_device*) data;
+	u32 	 	input;
+	static u32 ScanRegister;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	if(!priv->up)
+	{
+		RT_TRACE(COMP_CMD, "SetFwCmdIOTimerCallback(): driver is going to unload\n");
+		return;
+	}
+
+	RT_TRACE(COMP_CMD, "--->SetFwCmdIOTimerCallback(): Cmd(%#x), SetFwCmdInProgress(%d)\n", priv->CurrentFwCmdIO, priv->SetFwCmdInProgress);
+
+	switch(priv->CurrentFwCmdIO)
+	{
+		case FW_CMD_HIGH_PWR_ENABLE:
+			if((priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_DISABLE_HIGH_POWER)==0)
+				write_nic_dword(dev, WFM5, FW_HIGH_PWR_ENABLE);
+			break;
+
+		case FW_CMD_HIGH_PWR_DISABLE:
+			write_nic_dword(dev, WFM5, FW_HIGH_PWR_DISABLE);
+			break;
+
+		case FW_CMD_DIG_RESUME:
+			write_nic_dword(dev, WFM5, FW_DIG_RESUME);
+			break;
+
+		case FW_CMD_DIG_HALT:
+			write_nic_dword(dev, WFM5, FW_DIG_HALT);
+			break;
+
+		//
+		// <Roger_Notes> The following FW CMD IO was combined into single operation
+		// (i.e., to prevent number of system workitem out of resource!!).
+		// 2008.12.04.
+		//
+		case FW_CMD_RESUME_DM_BY_SCAN:
+			RT_TRACE(COMP_CMD, "[FW CMD] Set HIGHPWR enable and DIG resume!!\n");
+			if((priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_DISABLE_HIGH_POWER)==0)
+			{
+				write_nic_dword(dev, WFM5, FW_HIGH_PWR_ENABLE); //break;
+				ChkFwCmdIoDone(dev);
+			}
+			write_nic_dword(dev, WFM5, FW_DIG_RESUME);
+			break;
+
+		case FW_CMD_PAUSE_DM_BY_SCAN:
+			RT_TRACE(COMP_CMD, "[FW CMD] Set HIGHPWR disable and DIG halt!!\n");
+			write_nic_dword(dev, WFM5, FW_HIGH_PWR_DISABLE); //break;
+			ChkFwCmdIoDone(dev);
+			write_nic_dword(dev, WFM5, FW_DIG_HALT);
+			break;
+
+		//
+		// <Roger_Notes> The following FW CMD IO should be checked
+		// (i.e., workitem schedule timing issue!!).
+		// 2008.12.04.
+		//
+		case FW_CMD_DIG_DISABLE:
+			RT_TRACE(COMP_CMD, "[FW CMD] Set DIG disable!!\n");
+			write_nic_dword(dev, WFM5, FW_DIG_DISABLE);
+			break;
+
+		case FW_CMD_DIG_ENABLE:
+			RT_TRACE(COMP_CMD, "[FW CMD] Set DIG enable!!\n");
+			write_nic_dword(dev, WFM5, FW_DIG_ENABLE);
+			break;
+
+		case FW_CMD_RA_RESET:
+			write_nic_dword(dev, WFM5, FW_RA_RESET);
+			break;
+
+		case FW_CMD_RA_ACTIVE:
+			write_nic_dword(dev, WFM5, FW_RA_ACTIVE);
+			break;
+
+		case FW_CMD_RA_REFRESH_N:
+			RT_TRACE(COMP_CMD, "[FW CMD] Set RA refresh!! N\n");
+			if(priv->ieee80211->pHTInfo->IOTRaFunc & HT_IOT_RAFUNC_DISABLE_ALL)
+				input = FW_RA_REFRESH;
+			else
+				input = FW_RA_REFRESH | (priv->ieee80211->pHTInfo->IOTRaFunc << 8);
+			write_nic_dword(dev, WFM5, input);
+			break;
+		case FW_CMD_RA_REFRESH_BG:
+			RT_TRACE(COMP_CMD, "[FW CMD] Set RA refresh!! B/G\n");
+			write_nic_dword(dev, WFM5, FW_RA_REFRESH);
+			ChkFwCmdIoDone(dev);
+			write_nic_dword(dev, WFM5, FW_RA_ENABLE_BG);
+			break;
+
+		case FW_CMD_IQK_ENABLE:
+			write_nic_dword(dev, WFM5, FW_IQK_ENABLE);
+			break;
+
+		case FW_CMD_TXPWR_TRACK_ENABLE:
+			write_nic_dword(dev, WFM5, FW_TXPWR_TRACK_ENABLE);
+			break;
+
+		case FW_CMD_TXPWR_TRACK_DISABLE:
+			write_nic_dword(dev, WFM5, FW_TXPWR_TRACK_DISABLE);
+			break;
+
+		default:
+			RT_TRACE(COMP_CMD,"Unknown FW Cmd IO(%#x)\n", priv->CurrentFwCmdIO);
+			break;
+	}
+
+	ChkFwCmdIoDone(dev);
+
+	switch(priv->CurrentFwCmdIO)
+	{
+		case FW_CMD_HIGH_PWR_DISABLE:
+			//if(pMgntInfo->bTurboScan)
+			{
+				//Lower initial gain
+				rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, bMaskByte0, 0x17);
+				rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, bMaskByte0, 0x17);
+				// CCA threshold
+				rtl8192_setBBreg(dev, rCCK0_CCA, bMaskByte2, 0x40);
+				// Disable OFDM Part
+				rtl8192_setBBreg(dev, rOFDM0_TRMuxPar, bMaskByte2, 0x1);
+				ScanRegister = rtl8192_QueryBBReg(dev, rOFDM0_RxDetector1,bMaskDWord);
+				rtl8192_setBBreg(dev, rOFDM0_RxDetector1, 0xf, 0xf);
+				rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x0);
+			}
+			break;
+
+		case FW_CMD_HIGH_PWR_ENABLE:
+			//if(pMgntInfo->bTurboScan)
+			{
+				rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, bMaskByte0, 0x36);
+				rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, bMaskByte0, 0x36);
+
+				// CCA threshold
+				rtl8192_setBBreg(dev, rCCK0_CCA, bMaskByte2, 0x83);
+				// Enable OFDM Part
+				rtl8192_setBBreg(dev, rOFDM0_TRMuxPar, bMaskByte2, 0x0);
+
+				//LZM ADD because sometimes there is no FW_CMD_HIGH_PWR_DISABLE, this value will be 0.
+				if(ScanRegister != 0){
+				rtl8192_setBBreg(dev, rOFDM0_RxDetector1, bMaskDWord, ScanRegister);
+				}
+
+				if(priv->rf_type == RF_1T2R || priv->rf_type == RF_2T2R)
+					rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x3);
+				else
+					rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x1);
+			}
+			break;
+	}
+
+	priv->SetFwCmdInProgress = false;// Clear FW CMD operation flag.
+	RT_TRACE(COMP_CMD, "<---SetFwCmdIOWorkItemCallback()\n");
+
+}
+
diff --git a/drivers/staging/rtl8192su/r8192S_phy.h b/drivers/staging/rtl8192su/r8192S_phy.h
new file mode 100644
index 00000000000..580a7c6a760
--- /dev/null
+++ b/drivers/staging/rtl8192su/r8192S_phy.h
@@ -0,0 +1,138 @@
+/*****************************************************************************
+ *	Copyright(c) 2008,  RealTEK Technology Inc. All Right Reserved.
+ *
+ * Module:	__INC_HAL8192SPHYCFG_H
+ *
+ *
+ * Note:
+ *
+ *
+ * Export:	Constants, macro, functions(API), global variables(None).
+ *
+ * Abbrev:
+ *
+ * History:
+ *		Data		Who		Remark
+ *      08/07/2007  MHC    	1. Porting from 9x series PHYCFG.h.
+ *							2. Reorganize code architecture.
+ *
+ *****************************************************************************/
+ /* Check to see if the file has been included already.  */
+#ifndef _R8192S_PHY_H
+#define _R8192S_PHY_H
+
+
+/*--------------------------Define Parameters-------------------------------*/
+#define LOOP_LIMIT				5
+#define MAX_STALL_TIME			50		//us
+#define AntennaDiversityValue		0x80	//(dev->bSoftwareAntennaDiversity ? 0x00:0x80)
+#define MAX_TXPWR_IDX_NMODE_92S	63
+
+//#define delay_ms(_t)			PlatformStallExecution(1000*(_t))
+//#define delay_us(_t)			PlatformStallExecution(_t)
+
+/* Channel switch:The size of command tables for switch channel*/
+#define MAX_PRECMD_CNT 			16
+#define MAX_RFDEPENDCMD_CNT 	16
+#define MAX_POSTCMD_CNT 		16
+
+
+/*------------------------------Define structure----------------------------*/
+typedef enum _SwChnlCmdID{
+	CmdID_End,
+	CmdID_SetTxPowerLevel,
+	CmdID_BBRegWrite10,
+	CmdID_WritePortUlong,
+	CmdID_WritePortUshort,
+	CmdID_WritePortUchar,
+	CmdID_RF_WriteReg,
+}SwChnlCmdID;
+
+
+/* 1. Switch channel related */
+typedef struct _SwChnlCmd{
+	SwChnlCmdID	CmdID;
+	u32			Para1;
+	u32			Para2;
+	u32			msDelay;
+}__attribute__ ((packed)) SwChnlCmd;
+
+extern u32 rtl819XMACPHY_Array_PG[];
+extern u32 rtl819XPHY_REG_1T2RArray[];
+extern u32 rtl819XAGCTAB_Array[];
+extern u32 rtl819XRadioA_Array[];
+extern u32 rtl819XRadioB_Array[];
+extern u32 rtl819XRadioC_Array[];
+extern u32 rtl819XRadioD_Array[];
+
+typedef enum _HW90_BLOCK{
+	HW90_BLOCK_MAC = 0,
+	HW90_BLOCK_PHY0 = 1,
+	HW90_BLOCK_PHY1 = 2,
+	HW90_BLOCK_RF = 3,
+	HW90_BLOCK_MAXIMUM = 4, // Never use this
+}HW90_BLOCK_E, *PHW90_BLOCK_E;
+
+typedef enum _RF90_RADIO_PATH{
+	RF90_PATH_A = 0,			//Radio Path A
+	RF90_PATH_B = 1,			//Radio Path B
+	RF90_PATH_C = 2,			//Radio Path C
+	RF90_PATH_D = 3,			//Radio Path D
+	RF90_PATH_MAX	= 4,			//Max RF number 90 support
+}RF90_RADIO_PATH_E, *PRF90_RADIO_PATH_E;
+
+#define bMaskByte0                0xff
+#define bMaskByte1                0xff00
+#define bMaskByte2                0xff0000
+#define bMaskByte3                0xff000000
+#define bMaskHWord                0xffff0000
+#define bMaskLWord                0x0000ffff
+#define bMaskDWord                0xffffffff
+
+typedef enum _VERSION_8190{
+	// RTL8190
+	VERSION_8190_BD=0x3,
+	VERSION_8190_BE
+}VERSION_8190,*PVERSION_8190;
+
+//
+// BB and RF register read/write
+//
+
+extern	u32	rtl8192_QueryBBReg(struct net_device* dev,u32 RegAddr, u32 BitMask);
+extern	void	rtl8192_setBBreg(struct net_device* dev,u32 RegAddr, u32 BitMask,u32 Data);
+extern	u32	rtl8192_phy_QueryRFReg(struct net_device* dev,RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask);
+extern	void	rtl8192_phy_SetRFReg(struct net_device* dev,RF90_RADIO_PATH_E eRFPath, u32 RegAddr,u32 BitMask,u32 Data);
+
+bool rtl8192_phy_checkBBAndRF(struct net_device* dev, HW90_BLOCK_E CheckBlock, RF90_RADIO_PATH_E eRFPath);
+
+
+/* MAC/BB/RF HAL config */
+extern	bool 	PHY_MACConfig8192S(struct net_device* dev);
+extern	bool 	PHY_BBConfig8192S(struct net_device* dev);
+extern	bool 	PHY_RFConfig8192S(struct net_device* dev);
+
+extern	u8	rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev,RF90_RADIO_PATH_E eRFPath);
+extern	void	rtl8192_SetBWMode(struct net_device* dev,HT_CHANNEL_WIDTH ChnlWidth,HT_EXTCHNL_OFFSET Offset	);
+extern	u8	rtl8192_phy_SwChnl(struct net_device* dev,u8 channel);
+extern	u8	rtl8192_phy_CheckIsLegalRFPath(struct net_device* dev,u32 eRFPath	);
+extern	void    rtl8192_BBConfig(struct net_device* dev);
+extern	void 	PHY_IQCalibrateBcut(struct net_device* dev);
+extern	void 	PHY_IQCalibrate(struct net_device* dev);
+extern	void 	PHY_GetHWRegOriginalValue(struct net_device* dev);
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+extern void 	InitialGainOperateWorkItemCallBack(struct work_struct *work);
+#else
+extern void 	InitialGainOperateWorkItemCallBack(struct net_device *dev);
+#endif
+void PHY_SetTxPowerLevel8192S(struct net_device* dev, u8  channel);
+void PHY_InitialGain8192S(struct net_device* dev,u8 Operation   );
+
+/*--------------------------Exported Function prototype---------------------*/
+bool HalSetFwCmd8192S(struct net_device* dev, FW_CMD_IO_TYPE                FwCmdIO);
+extern void PHY_SetBeaconHwReg( struct net_device* dev, u16 BeaconInterval);
+void ChkFwCmdIoDone(struct net_device* dev);
+
+#endif	// __INC_HAL8192SPHYCFG_H
+
diff --git a/drivers/staging/rtl8192su/r8192S_phyreg.h b/drivers/staging/rtl8192su/r8192S_phyreg.h
new file mode 100644
index 00000000000..96c7cfa9254
--- /dev/null
+++ b/drivers/staging/rtl8192su/r8192S_phyreg.h
@@ -0,0 +1,1033 @@
+/*****************************************************************************
+ *	Copyright(c) 2008,  RealTEK Technology Inc. All Right Reserved.
+ *
+ * Module:	__INC_HAL8192SPHYREG_H
+ *
+ *
+ * Note:	1. Define PMAC/BB register map
+ *			2. Define RF register map
+ *			3. PMAC/BB register bit mask.
+ *			4. RF reg bit mask.
+ *			5. Other BB/RF relative definition.
+ *
+ *
+ * Export:	Constants, macro, functions(API), global variables(None).
+ *
+ * Abbrev:
+ *
+ * History:
+ *		Data		Who		Remark
+ *      08/07/2007  MHC    	1. Porting from 9x series PHYCFG.h.
+ *							2. Reorganize code architecture.
+ *	09/25/2008	MH		1. Add RL6052 register definition
+ *
+ *****************************************************************************/
+#ifndef __INC_HAL8192SPHYREG_H
+#define __INC_HAL8192SPHYREG_H
+
+
+/*--------------------------Define Parameters-------------------------------*/
+
+//============================================================
+//       8192S Regsiter offset definition
+//============================================================
+
+//
+// BB-PHY register PMAC 0x100 PHY 0x800 - 0xEFF
+// 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF
+// 2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00
+// 3. RF register 0x00-2E
+// 4. Bit Mask for BB/RF register
+// 5. Other defintion for BB/RF R/W
+//
+
+
+//
+// 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF
+// 1. Page1(0x100)
+//
+#define		rPMAC_Reset					0x100
+#define		rPMAC_TxStart				0x104
+#define		rPMAC_TxLegacySIG			0x108
+#define		rPMAC_TxHTSIG1				0x10c
+#define		rPMAC_TxHTSIG2				0x110
+#define		rPMAC_PHYDebug				0x114
+#define		rPMAC_TxPacketNum			0x118
+#define		rPMAC_TxIdle					0x11c
+#define		rPMAC_TxMACHeader0			0x120
+#define		rPMAC_TxMACHeader1			0x124
+#define		rPMAC_TxMACHeader2			0x128
+#define		rPMAC_TxMACHeader3			0x12c
+#define		rPMAC_TxMACHeader4			0x130
+#define		rPMAC_TxMACHeader5			0x134
+#define		rPMAC_TxDataType			0x138
+#define		rPMAC_TxRandomSeed			0x13c
+#define		rPMAC_CCKPLCPPreamble		0x140
+#define		rPMAC_CCKPLCPHeader		0x144
+#define		rPMAC_CCKCRC16				0x148
+#define		rPMAC_OFDMRxCRC32OK		0x170
+#define		rPMAC_OFDMRxCRC32Er		0x174
+#define		rPMAC_OFDMRxParityEr		0x178
+#define		rPMAC_OFDMRxCRC8Er		0x17c
+#define		rPMAC_CCKCRxRC16Er			0x180
+#define		rPMAC_CCKCRxRC32Er			0x184
+#define		rPMAC_CCKCRxRC32OK		0x188
+#define		rPMAC_TxStatus				0x18c
+
+//
+// 2. Page2(0x200)
+//
+// The following two definition are only used for USB interface.
+#define		RF_BB_CMD_ADDR			0x02c0	// RF/BB read/write command address.
+#define		RF_BB_CMD_DATA			0x02c4	// RF/BB read/write command data.
+
+//
+// 3. Page8(0x800)
+//
+#define		rFPGA0_RFMOD				0x800	//RF mode & CCK TxSC // RF BW Setting??
+
+#define		rFPGA0_TxInfo				0x804	// Status report??
+#define		rFPGA0_PSDFunction			0x808
+
+#define		rFPGA0_TxGainStage			0x80c	// Set TX PWR init gain?
+
+#define		rFPGA0_RFTiming1			0x810	// Useless now
+#define		rFPGA0_RFTiming2			0x814
+//#define rFPGA0_XC_RFTiming        		0x818
+//#define rFPGA0_XD_RFTiming        		0x81c
+
+#define		rFPGA0_XA_HSSIParameter1		0x820	// RF 3 wire register
+#define		rFPGA0_XA_HSSIParameter2		0x824
+#define		rFPGA0_XB_HSSIParameter1		0x828
+#define		rFPGA0_XB_HSSIParameter2		0x82c
+#define		rFPGA0_XC_HSSIParameter1		0x830
+#define		rFPGA0_XC_HSSIParameter2		0x834
+#define		rFPGA0_XD_HSSIParameter1		0x838
+#define		rFPGA0_XD_HSSIParameter2		0x83c
+#define		rFPGA0_XA_LSSIParameter		0x840
+#define		rFPGA0_XB_LSSIParameter		0x844
+#define		rFPGA0_XC_LSSIParameter		0x848
+#define		rFPGA0_XD_LSSIParameter		0x84c
+
+#define		rFPGA0_RFWakeUpParameter		0x850	// Useless now
+#define		rFPGA0_RFSleepUpParameter		0x854
+
+#define		rFPGA0_XAB_SwitchControl		0x858	// RF Channel switch
+#define		rFPGA0_XCD_SwitchControl		0x85c
+
+#define		rFPGA0_XA_RFInterfaceOE		0x860	// RF Channel switch
+#define		rFPGA0_XB_RFInterfaceOE		0x864
+#define		rFPGA0_XC_RFInterfaceOE		0x868
+#define		rFPGA0_XD_RFInterfaceOE		0x86c
+
+#define		rFPGA0_XAB_RFInterfaceSW		0x870	// RF Interface Software Control
+#define		rFPGA0_XCD_RFInterfaceSW		0x874
+
+#define		rFPGA0_XAB_RFParameter		0x878	// RF Parameter
+#define		rFPGA0_XCD_RFParameter		0x87c
+
+#define		rFPGA0_AnalogParameter1		0x880	// Crystal cap setting RF-R/W protection for parameter4??
+#define		rFPGA0_AnalogParameter2		0x884
+#define		rFPGA0_AnalogParameter3		0x888	// Useless now
+#define		rFPGA0_AnalogParameter4		0x88c
+
+#define		rFPGA0_XA_LSSIReadBack		0x8a0	// Tranceiver LSSI Readback
+#define		rFPGA0_XB_LSSIReadBack		0x8a4
+#define		rFPGA0_XC_LSSIReadBack		0x8a8
+#define		rFPGA0_XD_LSSIReadBack		0x8ac
+
+#define		rFPGA0_PSDReport			0x8b4	// Useless now
+#define		TransceiverA_HSPI_Readback	0x8b8	// Transceiver A HSPI Readback
+#define		TransceiverB_HSPI_Readback	0x8bc	// Transceiver B HSPI Readback
+#define		rFPGA0_XAB_RFInterfaceRB	0x8e0	// Useless now // RF Interface Readback Value
+#define		rFPGA0_XCD_RFInterfaceRB	0x8e4	// Useless now
+
+//
+// 4. Page9(0x900)
+//
+#define		rFPGA1_RFMOD				0x900	//RF mode & OFDM TxSC // RF BW Setting??
+
+#define		rFPGA1_TxBlock				0x904	// Useless now
+#define		rFPGA1_DebugSelect			0x908	// Useless now
+#define		rFPGA1_TxInfo				0x90c	// Useless now // Status report??
+
+//
+// 5. PageA(0xA00)
+//
+// Set Control channel to upper or lower. These settings are required only for 40MHz
+#define		rCCK0_System				0xa00
+
+#define		rCCK0_AFESetting				0xa04	// Disable init gain now // Select RX path by RSSI
+#define		rCCK0_CCA					0xa08	// Disable init gain now // Init gain
+
+#define		rCCK0_RxAGC1				0xa0c 	//AGC default value, saturation level // Antenna Diversity, RX AGC, LNA Threshold, RX LNA Threshold useless now. Not the same as 90 series
+#define		rCCK0_RxAGC2				0xa10 	//AGC & DAGC
+
+#define		rCCK0_RxHP					0xa14
+
+#define		rCCK0_DSPParameter1			0xa18	//Timing recovery & Channel estimation threshold
+#define		rCCK0_DSPParameter2			0xa1c	//SQ threshold
+
+#define		rCCK0_TxFilter1				0xa20
+#define		rCCK0_TxFilter2				0xa24
+#define		rCCK0_DebugPort				0xa28	//debug port and Tx filter3
+#define		rCCK0_FalseAlarmReport		0xa2c	//0xa2d	useless now 0xa30-a4f channel report
+#define		rCCK0_TRSSIReport         		0xa50
+#define		rCCK0_RxReport            		0xa54  //0xa57
+#define		rCCK0_FACounterLower      		0xa5c  //0xa5b
+#define		rCCK0_FACounterUpper      		0xa58  //0xa5c
+
+//
+// 6. PageC(0xC00)
+//
+#define		rOFDM0_LSTF				0xc00
+
+#define		rOFDM0_TRxPathEnable		0xc04
+#define		rOFDM0_TRMuxPar			0xc08
+#define		rOFDM0_TRSWIsolation		0xc0c
+
+#define		rOFDM0_XARxAFE				0xc10  //RxIQ DC offset, Rx digital filter, DC notch filter
+#define		rOFDM0_XARxIQImbalance    	0xc14  //RxIQ imblance matrix
+#define		rOFDM0_XBRxAFE            		0xc18
+#define		rOFDM0_XBRxIQImbalance    	0xc1c
+#define		rOFDM0_XCRxAFE            		0xc20
+#define		rOFDM0_XCRxIQImbalance    	0xc24
+#define		rOFDM0_XDRxAFE            		0xc28
+#define		rOFDM0_XDRxIQImbalance    	0xc2c
+
+#define		rOFDM0_RxDetector1			0xc30  //PD,BW & SBD	// DM tune init gain
+#define		rOFDM0_RxDetector2			0xc34  //SBD & Fame Sync.
+#define		rOFDM0_RxDetector3			0xc38  //Frame Sync.
+#define		rOFDM0_RxDetector4			0xc3c  //PD, SBD, Frame Sync & Short-GI
+
+#define		rOFDM0_RxDSP				0xc40  //Rx Sync Path
+#define		rOFDM0_CFOandDAGC			0xc44  //CFO & DAGC
+#define		rOFDM0_CCADropThreshold		0xc48 //CCA Drop threshold
+#define		rOFDM0_ECCAThreshold		0xc4c // energy CCA
+
+#define		rOFDM0_XAAGCCore1			0xc50	// DIG
+#define		rOFDM0_XAAGCCore2			0xc54
+#define		rOFDM0_XBAGCCore1			0xc58
+#define		rOFDM0_XBAGCCore2			0xc5c
+#define		rOFDM0_XCAGCCore1			0xc60
+#define		rOFDM0_XCAGCCore2			0xc64
+#define		rOFDM0_XDAGCCore1			0xc68
+#define		rOFDM0_XDAGCCore2			0xc6c
+
+#define		rOFDM0_AGCParameter1		0xc70
+#define		rOFDM0_AGCParameter2		0xc74
+#define		rOFDM0_AGCRSSITable		0xc78
+#define		rOFDM0_HTSTFAGC			0xc7c
+
+#define		rOFDM0_XATxIQImbalance		0xc80	// TX PWR TRACK and DIG
+#define		rOFDM0_XATxAFE				0xc84
+#define		rOFDM0_XBTxIQImbalance		0xc88
+#define		rOFDM0_XBTxAFE				0xc8c
+#define		rOFDM0_XCTxIQImbalance		0xc90
+#define		rOFDM0_XCTxAFE            		0xc94
+#define		rOFDM0_XDTxIQImbalance		0xc98
+#define		rOFDM0_XDTxAFE				0xc9c
+
+#define		rOFDM0_RxHPParameter		0xce0
+#define		rOFDM0_TxPseudoNoiseWgt	0xce4
+#define		rOFDM0_FrameSync			0xcf0
+#define		rOFDM0_DFSReport			0xcf4
+#define		rOFDM0_TxCoeff1				0xca4
+#define		rOFDM0_TxCoeff2				0xca8
+#define		rOFDM0_TxCoeff3				0xcac
+#define		rOFDM0_TxCoeff4				0xcb0
+#define		rOFDM0_TxCoeff5				0xcb4
+#define		rOFDM0_TxCoeff6				0xcb8
+
+
+//
+// 7. PageD(0xD00)
+//
+#define		rOFDM1_LSTF				0xd00
+#define		rOFDM1_TRxPathEnable		0xd04
+#define		rOFDM1_CFO					0xd08	// No setting now
+#define		rOFDM1_CSI1				0xd10
+#define		rOFDM1_SBD					0xd14
+#define		rOFDM1_CSI2				0xd18
+#define		rOFDM1_CFOTracking			0xd2c
+#define		rOFDM1_TRxMesaure1			0xd34
+#define		rOFDM1_IntfDet				0xd3c
+#define		rOFDM1_PseudoNoiseStateAB	0xd50
+#define		rOFDM1_PseudoNoiseStateCD	0xd54
+#define		rOFDM1_RxPseudoNoiseWgt	0xd58
+
+#define		rOFDM_PHYCounter1			0xda0  //cca, parity fail
+#define		rOFDM_PHYCounter2			0xda4  //rate illegal, crc8 fail
+#define		rOFDM_PHYCounter3			0xda8  //MCS not support
+#define		rOFDM_ShortCFOAB			0xdac	// No setting now
+#define		rOFDM_ShortCFOCD			0xdb0
+#define		rOFDM_LongCFOAB			0xdb4
+#define		rOFDM_LongCFOCD			0xdb8
+#define		rOFDM_TailCFOAB				0xdbc
+#define		rOFDM_TailCFOCD				0xdc0
+#define		rOFDM_PWMeasure1          		0xdc4
+#define		rOFDM_PWMeasure2          		0xdc8
+#define		rOFDM_BWReport				0xdcc
+#define		rOFDM_AGCReport				0xdd0
+#define		rOFDM_RxSNR				0xdd4
+#define		rOFDM_RxEVMCSI				0xdd8
+#define		rOFDM_SIGReport				0xddc
+
+
+//
+// 8. PageE(0xE00)
+//
+#define		rTxAGC_Rate18_06			0xe00
+#define		rTxAGC_Rate54_24			0xe04
+#define		rTxAGC_CCK_Mcs32			0xe08
+#define		rTxAGC_Mcs03_Mcs00			0xe10
+#define		rTxAGC_Mcs07_Mcs04			0xe14
+#define		rTxAGC_Mcs11_Mcs08			0xe18
+#define		rTxAGC_Mcs15_Mcs12			0xe1c
+
+//
+// 7. RF Register 0x00-0x2E (RF 8256)
+//    RF-0222D 0x00-3F
+//
+//Zebra1
+#define		rZebra1_HSSIEnable			0x0	// Useless now
+#define		rZebra1_TRxEnable1			0x1
+#define		rZebra1_TRxEnable2			0x2
+#define		rZebra1_AGC					0x4
+#define		rZebra1_ChargePump			0x5
+//#if (RTL92SE_FPGA_VERIFY == 1)
+#define		rZebra1_Channel				0x7	// RF channel switch
+//#else
+
+//#endif
+#define		rZebra1_TxGain				0x8	// Useless now
+#define		rZebra1_TxLPF				0x9
+#define		rZebra1_RxLPF				0xb
+#define		rZebra1_RxHPFCorner			0xc
+
+//Zebra4
+#define		rGlobalCtrl					0	// Useless now
+#define		rRTL8256_TxLPF				19
+#define		rRTL8256_RxLPF				11
+
+//RTL8258
+#define		rRTL8258_TxLPF				0x11	// Useless now
+#define		rRTL8258_RxLPF				0x13
+#define		rRTL8258_RSSILPF			0xa
+
+//
+// RL6052 Register definition
+//
+#define		RF_AC						0x00	//
+
+#define		RF_IQADJ_G1				0x01	//
+#define		RF_IQADJ_G2				0x02	//
+#define		RF_POW_TRSW				0x05	//
+
+#define		RF_GAIN_RX					0x06	//
+#define		RF_GAIN_TX					0x07	//
+
+#define		RF_TXM_IDAC				0x08	//
+#define		RF_BS_IQGEN				0x0F	//
+
+#define		RF_MODE1					0x10	//
+#define		RF_MODE2					0x11	//
+
+#define		RF_RX_AGC_HP				0x12	//
+#define		RF_TX_AGC					0x13	//
+#define		RF_BIAS						0x14	//
+#define		RF_IPA						0x15	//
+#define		RF_POW_ABILITY				0x17	//
+#define		RF_MODE_AG					0x18	//
+#define		rRfChannel					0x18	// RF channel and BW switch
+#define		RF_CHNLBW					0x18	// RF channel and BW switch
+#define		RF_TOP						0x19	//
+
+#define		RF_RX_G1					0x1A	//
+#define		RF_RX_G2					0x1B	//
+
+#define		RF_RX_BB2					0x1C	//
+#define		RF_RX_BB1					0x1D	//
+
+#define		RF_RCK1						0x1E	//
+#define		RF_RCK2						0x1F	//
+
+#define		RF_TX_G1					0x20	//
+#define		RF_TX_G2					0x21	//
+#define		RF_TX_G3					0x22	//
+
+#define		RF_TX_BB1					0x23	//
+
+#define		RF_T_METER					0x24	//
+
+#define		RF_SYN_G1					0x25	// RF TX Power control
+#define		RF_SYN_G2					0x26	// RF TX Power control
+#define		RF_SYN_G3					0x27	// RF TX Power control
+#define		RF_SYN_G4					0x28	// RF TX Power control
+#define		RF_SYN_G5					0x29	// RF TX Power control
+#define		RF_SYN_G6					0x2A	// RF TX Power control
+#define		RF_SYN_G7					0x2B	// RF TX Power control
+#define		RF_SYN_G8					0x2C	// RF TX Power control
+
+#define		RF_RCK_OS					0x30	// RF TX PA control
+
+#define		RF_TXPA_G1					0x31	// RF TX PA control
+#define		RF_TXPA_G2					0x32	// RF TX PA control
+#define		RF_TXPA_G3					0x33	// RF TX PA control
+
+//
+//Bit Mask
+//
+// 1. Page1(0x100)
+#define		bBBResetB					0x100	// Useless now?
+#define		bGlobalResetB				0x200
+#define		bOFDMTxStart				0x4
+#define		bCCKTxStart					0x8
+#define		bCRC32Debug					0x100
+#define		bPMACLoopback				0x10
+#define		bTxLSIG						0xffffff
+#define		bOFDMTxRate					0xf
+#define		bOFDMTxReserved				0x10
+#define		bOFDMTxLength				0x1ffe0
+#define		bOFDMTxParity				0x20000
+#define		bTxHTSIG1					0xffffff
+#define		bTxHTMCSRate				0x7f
+#define		bTxHTBW					0x80
+#define		bTxHTLength					0xffff00
+#define		bTxHTSIG2					0xffffff
+#define		bTxHTSmoothing				0x1
+#define		bTxHTSounding				0x2
+#define		bTxHTReserved				0x4
+#define		bTxHTAggreation				0x8
+#define		bTxHTSTBC					0x30
+#define		bTxHTAdvanceCoding			0x40
+#define		bTxHTShortGI					0x80
+#define		bTxHTNumberHT_LTF			0x300
+#define		bTxHTCRC8					0x3fc00
+#define		bCounterReset				0x10000
+#define		bNumOfOFDMTx				0xffff
+#define		bNumOfCCKTx				0xffff0000
+#define		bTxIdleInterval				0xffff
+#define		bOFDMService				0xffff0000
+#define		bTxMACHeader				0xffffffff
+#define		bTxDataInit					0xff
+#define		bTxHTMode					0x100
+#define		bTxDataType					0x30000
+#define		bTxRandomSeed				0xffffffff
+#define		bCCKTxPreamble				0x1
+#define		bCCKTxSFD					0xffff0000
+#define		bCCKTxSIG					0xff
+#define		bCCKTxService				0xff00
+#define		bCCKLengthExt				0x8000
+#define		bCCKTxLength				0xffff0000
+#define		bCCKTxCRC16				0xffff
+#define		bCCKTxStatus					0x1
+#define		bOFDMTxStatus				0x2
+
+#define 		IS_BB_REG_OFFSET_92S(_Offset)		((_Offset >= 0x800) && (_Offset <= 0xfff))
+
+// 2. Page8(0x800)
+#define		bRFMOD						0x1	// Reg 0x800 rFPGA0_RFMOD
+#define		bJapanMode					0x2
+#define		bCCKTxSC					0x30
+#define		bCCKEn						0x1000000
+#define		bOFDMEn					0x2000000
+
+#define		bOFDMRxADCPhase           		0x10000	// Useless now
+#define		bOFDMTxDACPhase           		0x40000
+#define		bXATxAGC                  			0x3f
+
+#define		bXBTxAGC                  			0xf00	// Reg 80c rFPGA0_TxGainStage
+#define		bXCTxAGC                  			0xf000
+#define		bXDTxAGC                  			0xf0000
+
+#define		bPAStart                  			0xf0000000	// Useless now
+#define		bTRStart                  			0x00f00000
+#define		bRFStart                  			0x0000f000
+#define		bBBStart                  			0x000000f0
+#define		bBBCCKStart               			0x0000000f
+#define		bPAEnd                    			0xf          //Reg0x814
+#define		bTREnd                    			0x0f000000
+#define		bRFEnd                    			0x000f0000
+#define		bCCAMask                  			0x000000f0   //T2R
+#define		bR2RCCAMask               			0x00000f00
+#define		bHSSI_R2TDelay            		0xf8000000
+#define		bHSSI_T2RDelay            		0xf80000
+#define		bContTxHSSI               			0x400     //chane gain at continue Tx
+#define		bIGFromCCK                			0x200
+#define		bAGCAddress               			0x3f
+#define		bRxHPTx                   			0x7000
+#define		bRxHPT2R                  			0x38000
+#define		bRxHPCCKIni               			0xc0000
+#define		bAGCTxCode                			0xc00000
+#define		bAGCRxCode                			0x300000
+
+#define		b3WireDataLength          		0x800	// Reg 0x820~84f rFPGA0_XA_HSSIParameter1
+#define		b3WireAddressLength       		0x400
+
+#define		b3WireRFPowerDown         		0x1	// Useless now
+//#define bHWSISelect               		0x8
+#define		b5GPAPEPolarity           			0x40000000
+#define		b2GPAPEPolarity           			0x80000000
+#define		bRFSW_TxDefaultAnt        		0x3
+#define		bRFSW_TxOptionAnt         		0x30
+#define		bRFSW_RxDefaultAnt        		0x300
+#define		bRFSW_RxOptionAnt         		0x3000
+#define		bRFSI_3WireData           		0x1
+#define		bRFSI_3WireClock          		0x2
+#define		bRFSI_3WireLoad           		0x4
+#define		bRFSI_3WireRW             		0x8
+#define		bRFSI_3Wire               			0xf
+
+#define		bRFSI_RFENV               			0x10	// Reg 0x870 rFPGA0_XAB_RFInterfaceSW
+
+#define		bRFSI_TRSW                			0x20	// Useless now
+#define		bRFSI_TRSWB               			0x40
+#define		bRFSI_ANTSW               			0x100
+#define		bRFSI_ANTSWB              		0x200
+#define		bRFSI_PAPE                			0x400
+#define		bRFSI_PAPE5G              			0x800
+#define		bBandSelect               			0x1
+#define		bHTSIG2_GI                			0x80
+#define		bHTSIG2_Smoothing         		0x01
+#define		bHTSIG2_Sounding          		0x02
+#define		bHTSIG2_Aggreaton         		0x08
+#define		bHTSIG2_STBC              		0x30
+#define		bHTSIG2_AdvCoding         		0x40
+#define		bHTSIG2_NumOfHTLTF        		0x300
+#define		bHTSIG2_CRC8              		0x3fc
+#define		bHTSIG1_MCS               			0x7f
+#define		bHTSIG1_BandWidth         		0x80
+#define		bHTSIG1_HTLength          		0xffff
+#define		bLSIG_Rate                			0xf
+#define		bLSIG_Reserved            		0x10
+#define		bLSIG_Length              			0x1fffe
+#define		bLSIG_Parity              			0x20
+#define		bCCKRxPhase               		0x4
+#define		bLSSIReadAddress          		0x7f800000   // T65 RF
+#define		bLSSIReadEdge             		0x80000000   //LSSI "Read" edge signal
+#define		bLSSIReadBackData         		0xfffff		// T65 RF
+#define		bLSSIReadOKFlag           		0x1000	// Useless now
+#define		bCCKSampleRate            		0x8       //0: 44MHz, 1:88MHz
+#define		bRegulator0Standby        		0x1
+#define		bRegulatorPLLStandby      		0x2
+#define		bRegulator1Standby        		0x4
+#define		bPLLPowerUp               			0x8
+#define		bDPLLPowerUp              		0x10
+#define		bDA10PowerUp              		0x20
+#define		bAD7PowerUp               			0x200
+#define		bDA6PowerUp               			0x2000
+#define		bXtalPowerUp              			0x4000
+#define		b40MDClkPowerUP           		0x8000
+#define		bDA6DebugMode             		0x20000
+#define		bDA6Swing                 			0x380000
+
+#define		bADClkPhase               			0x4000000	// Reg 0x880 rFPGA0_AnalogParameter1 20/40 CCK support switch 40/80 BB MHZ
+
+#define		b80MClkDelay              			0x18000000	// Useless
+#define		bAFEWatchDogEnable        		0x20000000
+
+#define		bXtalCap01                			0xc0000000	// Reg 0x884 rFPGA0_AnalogParameter2 Crystal cap
+#define		bXtalCap23                			0x3
+#define		bXtalCap92x					0x0f000000
+#define 		bXtalCap                				0x0f000000
+
+#define		bIntDifClkEnable          		0x400	// Useless
+#define		bExtSigClkEnable         	 	0x800
+#define		bBandgapMbiasPowerUp      	0x10000
+#define		bAD11SHGain               		0xc0000
+#define		bAD11InputRange           		0x700000
+#define		bAD11OPCurrent            		0x3800000
+#define		bIPathLoopback            		0x4000000
+#define		bQPathLoopback            		0x8000000
+#define		bAFELoopback              		0x10000000
+#define		bDA10Swing                		0x7e0
+#define		bDA10Reverse              		0x800
+#define		bDAClkSource              		0x1000
+#define		bAD7InputRange            		0x6000
+#define		bAD7Gain                  			0x38000
+#define		bAD7OutputCMMode          		0x40000
+#define		bAD7InputCMMode           		0x380000
+#define		bAD7Current               			0xc00000
+#define		bRegulatorAdjust          		0x7000000
+#define		bAD11PowerUpAtTx          		0x1
+#define		bDA10PSAtTx               		0x10
+#define		bAD11PowerUpAtRx          		0x100
+#define		bDA10PSAtRx               		0x1000
+#define		bCCKRxAGCFormat           		0x200
+#define		bPSDFFTSamplepPoint       		0xc000
+#define		bPSDAverageNum            		0x3000
+#define		bIQPathControl            		0xc00
+#define		bPSDFreq                  			0x3ff
+#define		bPSDAntennaPath           		0x30
+#define		bPSDIQSwitch              		0x40
+#define		bPSDRxTrigger             		0x400000
+#define		bPSDTxTrigger             		0x80000000
+#define		bPSDSineToneScale        		0x7f000000
+#define		bPSDReport                			0xffff
+
+// 3. Page9(0x900)
+#define		bOFDMTxSC                 		0x30000000	// Useless
+#define		bCCKTxOn                  			0x1
+#define		bOFDMTxOn                 		0x2
+#define		bDebugPage                		0xfff  //reset debug page and also HWord, LWord
+#define		bDebugItem                		0xff   //reset debug page and LWord
+#define		bAntL              	       		0x10
+#define		bAntNonHT           	      			0x100
+#define		bAntHT1               			0x1000
+#define		bAntHT2                   			0x10000
+#define		bAntHT1S1                 			0x100000
+#define		bAntNonHTS1               		0x1000000
+
+// 4. PageA(0xA00)
+#define		bCCKBBMode                		0x3	// Useless
+#define		bCCKTxPowerSaving         		0x80
+#define		bCCKRxPowerSaving         		0x40
+
+#define		bCCKSideBand              		0x10	// Reg 0xa00 rCCK0_System 20/40 switch
+
+#define		bCCKScramble              		0x8	// Useless
+#define		bCCKAntDiversity    		      	0x8000
+#define		bCCKCarrierRecovery   	    	0x4000
+#define		bCCKTxRate           		     	0x3000
+#define		bCCKDCCancel             	 	0x0800
+#define		bCCKISICancel             		0x0400
+#define		bCCKMatchFilter           		0x0200
+#define		bCCKEqualizer             		0x0100
+#define		bCCKPreambleDetect       	 	0x800000
+#define		bCCKFastFalseCCA          		0x400000
+#define		bCCKChEstStart            		0x300000
+#define		bCCKCCACount              		0x080000
+#define		bCCKcs_lim                			0x070000
+#define		bCCKBistMode              		0x80000000
+#define		bCCKCCAMask             	  	0x40000000
+#define		bCCKTxDACPhase         	   	0x4
+#define		bCCKRxADCPhase         	   	0x20000000   //r_rx_clk
+#define		bCCKr_cp_mode0         	   	0x0100
+#define		bCCKTxDCOffset           	 	0xf0
+#define		bCCKRxDCOffset           	 	0xf
+#define		bCCKCCAMode              	 	0xc000
+#define		bCCKFalseCS_lim           		0x3f00
+#define		bCCKCS_ratio              		0xc00000
+#define		bCCKCorgBit_sel           		0x300000
+#define		bCCKPD_lim                			0x0f0000
+#define		bCCKNewCCA                		0x80000000
+#define		bCCKRxHPofIG              		0x8000
+#define		bCCKRxIG                  			0x7f00
+#define		bCCKLNAPolarity           		0x800000
+#define		bCCKRx1stGain             		0x7f0000
+#define		bCCKRFExtend              		0x20000000 //CCK Rx Iinital gain polarity
+#define		bCCKRxAGCSatLevel        	 	0x1f000000
+#define		bCCKRxAGCSatCount       	  	0xe0
+#define		bCCKRxRFSettle            		0x1f       //AGCsamp_dly
+#define		bCCKFixedRxAGC           	 	0x8000
+//#define bCCKRxAGCFormat         	 	0x4000   //remove to HSSI register 0x824
+#define		bCCKAntennaPolarity      	 	0x2000
+#define		bCCKTxFilterType          		0x0c00
+#define		bCCKRxAGCReportType   	   	0x0300
+#define		bCCKRxDAGCEn              		0x80000000
+#define		bCCKRxDAGCPeriod        	  	0x20000000
+#define		bCCKRxDAGCSatLevel     	   	0x1f000000
+#define		bCCKTimingRecovery       	 	0x800000
+#define		bCCKTxC0                  			0x3f0000
+#define		bCCKTxC1                  			0x3f000000
+#define		bCCKTxC2                  			0x3f
+#define		bCCKTxC3                  			0x3f00
+#define		bCCKTxC4                  			0x3f0000
+#define		bCCKTxC5                  			0x3f000000
+#define		bCCKTxC6                  			0x3f
+#define		bCCKTxC7                  			0x3f00
+#define		bCCKDebugPort             		0xff0000
+#define		bCCKDACDebug              		0x0f000000
+#define		bCCKFalseAlarmEnable      		0x8000
+#define		bCCKFalseAlarmRead        		0x4000
+#define		bCCKTRSSI                 			0x7f
+#define		bCCKRxAGCReport           		0xfe
+#define		bCCKRxReport_AntSel       		0x80000000
+#define		bCCKRxReport_MFOff        		0x40000000
+#define		bCCKRxRxReport_SQLoss     	0x20000000
+#define		bCCKRxReport_Pktloss      		0x10000000
+#define		bCCKRxReport_Lockedbit    	0x08000000
+#define		bCCKRxReport_RateError    	0x04000000
+#define		bCCKRxReport_RxRate       		0x03000000
+#define		bCCKRxFACounterLower      	0xff
+#define		bCCKRxFACounterUpper      	0xff000000
+#define		bCCKRxHPAGCStart          		0xe000
+#define		bCCKRxHPAGCFinal          		0x1c00
+#define		bCCKRxFalseAlarmEnable    	0x8000
+#define		bCCKFACounterFreeze       		0x4000
+#define		bCCKTxPathSel             		0x10000000
+#define		bCCKDefaultRxPath         		0xc000000
+#define		bCCKOptionRxPath          		0x3000000
+
+// 5. PageC(0xC00)
+#define		bNumOfSTF                			0x3	// Useless
+#define		bShift_L                 			0xc0
+#define		bGI_TH                   			0xc
+#define		bRxPathA                 			0x1
+#define		bRxPathB                 			0x2
+#define		bRxPathC                 			0x4
+#define		bRxPathD                 			0x8
+#define		bTxPathA                 			0x1
+#define		bTxPathB                 			0x2
+#define		bTxPathC                 			0x4
+#define		bTxPathD                 			0x8
+#define		bTRSSIFreq               			0x200
+#define		bADCBackoff              			0x3000
+#define		bDFIRBackoff             			0xc000
+#define		bTRSSILatchPhase         		0x10000
+#define		bRxIDCOffset             			0xff
+#define		bRxQDCOffset             			0xff00
+#define		bRxDFIRMode              		0x1800000
+#define		bRxDCNFType              		0xe000000
+#define		bRXIQImb_A               			0x3ff
+#define		bRXIQImb_B               			0xfc00
+#define		bRXIQImb_C               			0x3f0000
+#define		bRXIQImb_D               			0xffc00000
+#define		bDC_dc_Notch             		0x60000
+#define		bRxNBINotch              			0x1f000000
+#define		bPD_TH                   			0xf
+#define		bPD_TH_Opt2              		0xc000
+#define		bPWED_TH                 			0x700
+#define		bIfMF_Win_L              			0x800
+#define		bPD_Option               			0x1000
+#define		bMF_Win_L                			0xe000
+#define		bBW_Search_L             		0x30000
+#define		bwin_enh_L               			0xc0000
+#define		bBW_TH                   			0x700000
+#define		bED_TH2                  			0x3800000
+#define		bBW_option               			0x4000000
+#define		bRatio_TH                			0x18000000
+#define		bWindow_L                			0xe0000000
+#define		bSBD_Option              			0x1
+#define		bFrame_TH                			0x1c
+#define		bFS_Option               			0x60
+#define		bDC_Slope_check          		0x80
+#define		bFGuard_Counter_DC_L     		0xe00
+#define		bFrame_Weight_Short      		0x7000
+#define		bSub_Tune                			0xe00000
+#define		bFrame_DC_Length         		0xe000000
+#define		bSBD_start_offset        		0x30000000
+#define		bFrame_TH_2              		0x7
+#define		bFrame_GI2_TH            		0x38
+#define		bGI2_Sync_en             		0x40
+#define		bSarch_Short_Early       		0x300
+#define		bSarch_Short_Late        		0xc00
+#define		bSarch_GI2_Late          		0x70000
+#define		bCFOAntSum               		0x1
+#define		bCFOAcc                  			0x2
+#define		bCFOStartOffset          		0xc
+#define		bCFOLookBack             		0x70
+#define		bCFOSumWeight            		0x80
+#define		bDAGCEnable              			0x10000
+#define		bTXIQImb_A               			0x3ff
+#define		bTXIQImb_B               			0xfc00
+#define		bTXIQImb_C               			0x3f0000
+#define		bTXIQImb_D               			0xffc00000
+#define		bTxIDCOffset             			0xff
+#define		bTxQDCOffset             			0xff00
+#define		bTxDFIRMode              		0x10000
+#define		bTxPesudoNoiseOn         		0x4000000
+#define		bTxPesudoNoise_A         		0xff
+#define		bTxPesudoNoise_B         		0xff00
+#define		bTxPesudoNoise_C         		0xff0000
+#define		bTxPesudoNoise_D         		0xff000000
+#define		bCCADropOption           		0x20000
+#define		bCCADropThres            		0xfff00000
+#define		bEDCCA_H                 			0xf
+#define		bEDCCA_L                 			0xf0
+#define		bLambda_ED               0x300
+#define		bRxInitialGain           0x7f
+#define		bRxAntDivEn              0x80
+#define		bRxAGCAddressForLNA      0x7f00
+#define		bRxHighPowerFlow         0x8000
+#define		bRxAGCFreezeThres        0xc0000
+#define		bRxFreezeStep_AGC1       0x300000
+#define		bRxFreezeStep_AGC2       0xc00000
+#define		bRxFreezeStep_AGC3       0x3000000
+#define		bRxFreezeStep_AGC0       0xc000000
+#define		bRxRssi_Cmp_En           0x10000000
+#define		bRxQuickAGCEn            0x20000000
+#define		bRxAGCFreezeThresMode    0x40000000
+#define		bRxOverFlowCheckType     0x80000000
+#define		bRxAGCShift              0x7f
+#define		bTRSW_Tri_Only           0x80
+#define		bPowerThres              0x300
+#define		bRxAGCEn                 0x1
+#define		bRxAGCTogetherEn         0x2
+#define		bRxAGCMin                0x4
+#define		bRxHP_Ini                0x7
+#define		bRxHP_TRLNA              0x70
+#define		bRxHP_RSSI               0x700
+#define		bRxHP_BBP1               0x7000
+#define		bRxHP_BBP2               0x70000
+#define		bRxHP_BBP3               0x700000
+#define		bRSSI_H                  0x7f0000     //the threshold for high power
+#define		bRSSI_Gen                0x7f000000   //the threshold for ant diversity
+#define		bRxSettle_TRSW           0x7
+#define		bRxSettle_LNA            0x38
+#define		bRxSettle_RSSI           0x1c0
+#define		bRxSettle_BBP            0xe00
+#define		bRxSettle_RxHP           0x7000
+#define		bRxSettle_AntSW_RSSI     0x38000
+#define		bRxSettle_AntSW          0xc0000
+#define		bRxProcessTime_DAGC      0x300000
+#define		bRxSettle_HSSI           0x400000
+#define		bRxProcessTime_BBPPW     0x800000
+#define		bRxAntennaPowerShift     0x3000000
+#define		bRSSITableSelect         0xc000000
+#define		bRxHP_Final              0x7000000
+#define		bRxHTSettle_BBP          0x7
+#define		bRxHTSettle_HSSI         0x8
+#define		bRxHTSettle_RxHP         0x70
+#define		bRxHTSettle_BBPPW        0x80
+#define		bRxHTSettle_Idle         0x300
+#define		bRxHTSettle_Reserved     0x1c00
+#define		bRxHTRxHPEn              0x8000
+#define		bRxHTAGCFreezeThres      0x30000
+#define		bRxHTAGCTogetherEn       0x40000
+#define		bRxHTAGCMin              0x80000
+#define		bRxHTAGCEn               0x100000
+#define		bRxHTDAGCEn              0x200000
+#define		bRxHTRxHP_BBP            0x1c00000
+#define		bRxHTRxHP_Final          0xe0000000
+#define		bRxPWRatioTH             0x3
+#define		bRxPWRatioEn             0x4
+#define		bRxMFHold                0x3800
+#define		bRxPD_Delay_TH1          0x38
+#define		bRxPD_Delay_TH2          0x1c0
+#define		bRxPD_DC_COUNT_MAX       0x600
+//#define bRxMF_Hold               0x3800
+#define		bRxPD_Delay_TH           0x8000
+#define		bRxProcess_Delay         0xf0000
+#define		bRxSearchrange_GI2_Early 0x700000
+#define		bRxFrame_Guard_Counter_L 0x3800000
+#define		bRxSGI_Guard_L           0xc000000
+#define		bRxSGI_Search_L          0x30000000
+#define		bRxSGI_TH                0xc0000000
+#define		bDFSCnt0                 0xff
+#define		bDFSCnt1                 0xff00
+#define		bDFSFlag                 0xf0000
+#define		bMFWeightSum             0x300000
+#define		bMinIdxTH                0x7f000000
+#define		bDAFormat                0x40000
+#define		bTxChEmuEnable           0x01000000
+#define		bTRSWIsolation_A         0x7f
+#define		bTRSWIsolation_B         0x7f00
+#define		bTRSWIsolation_C         0x7f0000
+#define		bTRSWIsolation_D         0x7f000000
+#define		bExtLNAGain              0x7c00
+
+// 6. PageE(0xE00)
+#define		bSTBCEn                  0x4	// Useless
+#define		bAntennaMapping          0x10
+#define		bNss                     0x20
+#define		bCFOAntSumD              0x200
+#define		bPHYCounterReset         0x8000000
+#define		bCFOReportGet            0x4000000
+#define		bOFDMContinueTx          0x10000000
+#define		bOFDMSingleCarrier       0x20000000
+#define		bOFDMSingleTone          0x40000000
+//#define bRxPath1                 0x01
+//#define bRxPath2                 0x02
+//#define bRxPath3                 0x04
+//#define bRxPath4                 0x08
+//#define bTxPath1                 0x10
+//#define bTxPath2                 0x20
+#define		bHTDetect                0x100
+#define		bCFOEn                   0x10000
+#define		bCFOValue                0xfff00000
+#define		bSigTone_Re              0x3f
+#define		bSigTone_Im              0x7f00
+#define		bCounter_CCA             0xffff
+#define		bCounter_ParityFail      0xffff0000
+#define		bCounter_RateIllegal     0xffff
+#define		bCounter_CRC8Fail        0xffff0000
+#define		bCounter_MCSNoSupport    0xffff
+#define		bCounter_FastSync        0xffff
+#define		bShortCFO                0xfff
+#define		bShortCFOTLength         12   //total
+#define		bShortCFOFLength         11   //fraction
+#define		bLongCFO                 0x7ff
+#define		bLongCFOTLength          11
+#define		bLongCFOFLength          11
+#define		bTailCFO                 0x1fff
+#define		bTailCFOTLength          13
+#define		bTailCFOFLength          12
+#define		bmax_en_pwdB             0xffff
+#define		bCC_power_dB             0xffff0000
+#define		bnoise_pwdB              0xffff
+#define		bPowerMeasTLength        10
+#define		bPowerMeasFLength        3
+#define		bRx_HT_BW                0x1
+#define		bRxSC                    0x6
+#define		bRx_HT                   0x8
+#define		bNB_intf_det_on          0x1
+#define		bIntf_win_len_cfg        0x30
+#define		bNB_Intf_TH_cfg          0x1c0
+#define		bRFGain                  0x3f
+#define		bTableSel                0x40
+#define		bTRSW                    0x80
+#define		bRxSNR_A                 0xff
+#define		bRxSNR_B                 0xff00
+#define		bRxSNR_C                 0xff0000
+#define		bRxSNR_D                 0xff000000
+#define		bSNREVMTLength           8
+#define		bSNREVMFLength           1
+#define		bCSI1st                  0xff
+#define		bCSI2nd                  0xff00
+#define		bRxEVM1st                0xff0000
+#define		bRxEVM2nd                0xff000000
+#define		bSIGEVM                  0xff
+#define		bPWDB                    0xff00
+#define		bSGIEN                   0x10000
+
+#define		bSFactorQAM1             0xf	// Useless
+#define		bSFactorQAM2             0xf0
+#define		bSFactorQAM3             0xf00
+#define		bSFactorQAM4             0xf000
+#define		bSFactorQAM5             0xf0000
+#define		bSFactorQAM6             0xf0000
+#define		bSFactorQAM7             0xf00000
+#define		bSFactorQAM8             0xf000000
+#define		bSFactorQAM9             0xf0000000
+#define		bCSIScheme               0x100000
+
+#define		bNoiseLvlTopSet          0x3	// Useless
+#define		bChSmooth                0x4
+#define		bChSmoothCfg1            0x38
+#define		bChSmoothCfg2            0x1c0
+#define		bChSmoothCfg3            0xe00
+#define		bChSmoothCfg4            0x7000
+#define		bMRCMode                 0x800000
+#define		bTHEVMCfg                0x7000000
+
+#define		bLoopFitType             0x1	// Useless
+#define		bUpdCFO                  0x40
+#define		bUpdCFOOffData           0x80
+#define		bAdvUpdCFO               0x100
+#define		bAdvTimeCtrl             0x800
+#define		bUpdClko                 0x1000
+#define		bFC                      0x6000
+#define		bTrackingMode            0x8000
+#define		bPhCmpEnable             0x10000
+#define		bUpdClkoLTF              0x20000
+#define		bComChCFO                0x40000
+#define		bCSIEstiMode             0x80000
+#define		bAdvUpdEqz               0x100000
+#define		bUChCfg                  0x7000000
+#define		bUpdEqz                  0x8000000
+
+#define		bTxAGCRate18_06			0x7f7f7f7f	// Useless
+#define		bTxAGCRate54_24			0x7f7f7f7f
+#define		bTxAGCRateMCS32			0x7f
+#define		bTxAGCRateCCK			0x7f00
+#define		bTxAGCRateMCS3_MCS0		0x7f7f7f7f
+#define		bTxAGCRateMCS7_MCS4		0x7f7f7f7f
+#define		bTxAGCRateMCS11_MCS8	0x7f7f7f7f
+#define		bTxAGCRateMCS15_MCS12	0x7f7f7f7f
+
+//Rx Pseduo noise
+#define		bRxPesudoNoiseOn         0x20000000	// Useless
+#define		bRxPesudoNoise_A         0xff
+#define		bRxPesudoNoise_B         0xff00
+#define		bRxPesudoNoise_C         0xff0000
+#define		bRxPesudoNoise_D         0xff000000
+#define		bPesudoNoiseState_A      0xffff
+#define		bPesudoNoiseState_B      0xffff0000
+#define		bPesudoNoiseState_C      0xffff
+#define		bPesudoNoiseState_D      0xffff0000
+
+//7. RF Register
+//Zebra1
+#define		bZebra1_HSSIEnable        0x8		// Useless
+#define		bZebra1_TRxControl        0xc00
+#define		bZebra1_TRxGainSetting    0x07f
+#define		bZebra1_RxCorner          0xc00
+#define		bZebra1_TxChargePump      0x38
+#define		bZebra1_RxChargePump      0x7
+#define		bZebra1_ChannelNum        0xf80
+#define		bZebra1_TxLPFBW           0x400
+#define		bZebra1_RxLPFBW           0x600
+
+//Zebra4
+#define		bRTL8256RegModeCtrl1      0x100	// Useless
+#define		bRTL8256RegModeCtrl0      0x40
+#define		bRTL8256_TxLPFBW          0x18
+#define		bRTL8256_RxLPFBW          0x600
+
+//RTL8258
+#define		bRTL8258_TxLPFBW          0xc	// Useless
+#define		bRTL8258_RxLPFBW          0xc00
+#define		bRTL8258_RSSILPFBW        0xc0
+
+
+//
+// Other Definition
+//
+
+//byte endable for sb_write
+#define		bByte0                    0x1	// Useless
+#define		bByte1                    0x2
+#define		bByte2                    0x4
+#define		bByte3                    0x8
+#define		bWord0                    0x3
+#define		bWord1                    0xc
+#define		bDWord                    0xf
+
+//for PutRegsetting & GetRegSetting BitMask
+#define		bMaskByte0                0xff	// Reg 0xc50 rOFDM0_XAAGCCore~0xC6f
+#define		bMaskByte1                0xff00
+#define		bMaskByte2                0xff0000
+#define		bMaskByte3                0xff000000
+#define		bMaskHWord                0xffff0000
+#define		bMaskLWord                0x0000ffff
+#define		bMaskDWord                0xffffffff
+
+//for PutRFRegsetting & GetRFRegSetting BitMask
+#define		bMask12Bits               0xfffff	// RF Reg mask bits
+#define		bMask20Bits               0xfffff	// RF Reg mask bits T65 RF
+#define 		bRFRegOffsetMask		0xfffff
+
+#define		bEnable                   0x1	// Useless
+#define		bDisable                  0x0
+
+#define		LeftAntenna               0x0	// Useless
+#define		RightAntenna              0x1
+
+#define		tCheckTxStatus            500   //500ms // Useless
+#define		tUpdateRxCounter          100   //100ms
+
+#define		rateCCK     0	// Useless
+#define		rateOFDM    1
+#define		rateHT      2
+
+//define Register-End
+#define		bPMAC_End                 0x1ff	// Useless
+#define		bFPGAPHY0_End             0x8ff
+#define		bFPGAPHY1_End             0x9ff
+#define		bCCKPHY0_End              0xaff
+#define		bOFDMPHY0_End             0xcff
+#define		bOFDMPHY1_End             0xdff
+
+//define max debug item in each debug page
+//#define bMaxItem_FPGA_PHY0        0x9
+//#define bMaxItem_FPGA_PHY1        0x3
+//#define bMaxItem_PHY_11B          0x16
+//#define bMaxItem_OFDM_PHY0        0x29
+//#define bMaxItem_OFDM_PHY1        0x0
+
+#define		bPMACControl              0x0		// Useless
+#define		bWMACControl              0x1
+#define		bWNICControl              0x2
+
+#define		PathA                     0x0	// Useless
+#define		PathB                     0x1
+#define		PathC                     0x2
+#define		PathD                     0x3
+
+/*--------------------------Define Parameters-------------------------------*/
+
+
+#endif	//__INC_HAL8192SPHYREG_H
+
diff --git a/drivers/staging/rtl8192su/r8192S_rtl6052.c b/drivers/staging/rtl8192su/r8192S_rtl6052.c
new file mode 100644
index 00000000000..71caf81a6e1
--- /dev/null
+++ b/drivers/staging/rtl8192su/r8192S_rtl6052.c
@@ -0,0 +1,946 @@
+/******************************************************************************
+ *
+ *     (c) Copyright  2008, RealTEK Technologies Inc. All Rights Reserved.
+ *
+ * Module:	HalRf6052.c	( Source C File)
+ *
+ * Note:	Provide RF 6052 series relative API.
+ *
+ * Function:
+ *
+ * Export:
+ *
+ * Abbrev:
+ *
+ * History:
+ * Data			Who		Remark
+ *
+ * 09/25/2008	MHC		Create initial version.
+ * 11/05/2008 	MHC		Add API for tw power setting.
+ *
+ *
+******************************************************************************/
+#include "r8192U.h"
+#include "r8192S_rtl6052.h"
+
+#ifdef RTL8192SU
+#include "r8192S_hw.h"
+#include "r8192S_phyreg.h"
+#include "r8192S_phy.h"
+#else
+#include "r8192U_hw.h"
+#include "r819xU_phyreg.h"
+#include "r819xU_phy.h"
+#endif
+
+
+/*---------------------------Define Local Constant---------------------------*/
+// Define local structure for debug!!!!!
+typedef struct RF_Shadow_Compare_Map {
+	// Shadow register value
+	u32		Value;
+	// Compare or not flag
+	u8		Compare;
+	// Record If it had ever modified unpredicted
+	u8		ErrorOrNot;
+	// Recorver Flag
+	u8		Recorver;
+	//
+	u8		Driver_Write;
+}RF_SHADOW_T;
+/*---------------------------Define Local Constant---------------------------*/
+
+
+/*------------------------Define global variable-----------------------------*/
+/*------------------------Define global variable-----------------------------*/
+
+
+
+
+/*---------------------Define local function prototype-----------------------*/
+void phy_RF6052_Config_HardCode(struct net_device* dev);
+
+RT_STATUS phy_RF6052_Config_ParaFile(struct net_device* dev);
+/*---------------------Define local function prototype-----------------------*/
+
+/*------------------------Define function prototype--------------------------*/
+extern void RF_ChangeTxPath(struct net_device* dev,  u16 DataRate);
+
+/*------------------------Define function prototype--------------------------*/
+
+/*------------------------Define local variable------------------------------*/
+// 2008/11/20 MH For Debug only, RF
+static	RF_SHADOW_T	RF_Shadow[RF6052_MAX_PATH][RF6052_MAX_REG];// = {{0}};//FIXLZM
+/*------------------------Define local variable------------------------------*/
+
+/*------------------------Define function prototype--------------------------*/
+/*-----------------------------------------------------------------------------
+ * Function:	RF_ChangeTxPath
+ *
+ * Overview:	For RL6052, we must change some RF settign for 1T or 2T.
+ *
+ * Input:		u16 DataRate		// 0x80-8f, 0x90-9f
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ * When			Who		Remark
+ * 09/25/2008 	MHC		Create Version 0.
+ *						Firmwaer support the utility later.
+ *
+ *---------------------------------------------------------------------------*/
+extern void RF_ChangeTxPath(struct net_device* dev,  u16 DataRate)
+{
+// We do not support gain table change inACUT now !!!! Delete later !!!
+#if 0//(RTL92SE_FPGA_VERIFY == 0)
+	static	u1Byte	RF_Path_Type = 2;	// 1 = 1T 2= 2T
+	static	u4Byte	tx_gain_tbl1[6]
+			= {0x17f50, 0x11f40, 0x0cf30, 0x08720, 0x04310, 0x00100};
+	static	u4Byte	tx_gain_tbl2[6]
+			= {0x15ea0, 0x10e90, 0x0c680, 0x08250, 0x04040, 0x00030};
+	u1Byte	i;
+
+	if (RF_Path_Type == 2 && (DataRate&0xF) <= 0x7)
+	{
+		// Set TX SYNC power G2G3 loop filter
+		PHY_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A,
+					RF_TXPA_G2, bMask20Bits, 0x0f000);
+		PHY_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A,
+					RF_TXPA_G3, bMask20Bits, 0xeacf1);
+
+		// Change TX AGC gain table
+		for (i = 0; i < 6; i++)
+			PHY_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A,
+						RF_TX_AGC, bMask20Bits, tx_gain_tbl1[i]);
+
+		// Set PA to high value
+		PHY_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A,
+					RF_TXPA_G2, bMask20Bits, 0x01e39);
+	}
+	else if (RF_Path_Type == 1 && (DataRate&0xF) >= 0x8)
+	{
+		// Set TX SYNC power G2G3 loop filter
+		PHY_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A,
+					RF_TXPA_G2, bMask20Bits, 0x04440);
+		PHY_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A,
+					RF_TXPA_G3, bMask20Bits, 0xea4f1);
+
+		// Change TX AGC gain table
+		for (i = 0; i < 6; i++)
+			PHY_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A,
+						RF_TX_AGC, bMask20Bits, tx_gain_tbl2[i]);
+
+		// Set PA low gain
+		PHY_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A,
+					RF_TXPA_G2, bMask20Bits, 0x01e19);
+	}
+#endif
+
+}	/* RF_ChangeTxPath */
+
+
+/*-----------------------------------------------------------------------------
+ * Function:    PHY_RF6052SetBandwidth()
+ *
+ * Overview:    This function is called by SetBWModeCallback8190Pci() only
+ *
+ * Input:       PADAPTER				Adapter
+ *			WIRELESS_BANDWIDTH_E	Bandwidth	//20M or 40M
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Note:		For RF type 0222D
+ *---------------------------------------------------------------------------*/
+void PHY_RF6052SetBandwidth(struct net_device* dev, HT_CHANNEL_WIDTH Bandwidth)	//20M or 40M
+{
+	//u8				eRFPath;
+	//struct r8192_priv 	*priv = ieee80211_priv(dev);
+
+
+	//if (priv->card_8192 == NIC_8192SE)
+#ifdef RTL8192SU  //YJ,test,090113
+	{
+		switch(Bandwidth)
+		{
+			case HT_CHANNEL_WIDTH_20:
+				//if (priv->card_8192_version >= VERSION_8192S_BCUT)
+				//	rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0xff, 0x58);
+
+				rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A, RF_CHNLBW, BIT10|BIT11, 0x01);
+				break;
+			case HT_CHANNEL_WIDTH_20_40:
+				//if (priv->card_8192_version >= VERSION_8192S_BCUT)
+				//	rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0xff, 0x18);
+
+				rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A, RF_CHNLBW, BIT10|BIT11, 0x00);
+				break;
+			default:
+				RT_TRACE(COMP_DBG, "PHY_SetRF6052Bandwidth(): unknown Bandwidth: %#X\n",Bandwidth);
+				break;
+		}
+	}
+//	else
+#else
+	{
+	for(eRFPath = 0; eRFPath <priv->NumTotalRFPath; eRFPath++)
+	{
+		switch(Bandwidth)
+		{
+			case HT_CHANNEL_WIDTH_20:
+					//PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)RF90_PATH_A, RF_CHNLBW, (BIT10|BIT11), 0x01);
+				break;
+			case HT_CHANNEL_WIDTH_20_40:
+					//PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)RF90_PATH_A, RF_CHNLBW, (BIT10|BIT11), 0x00);
+				break;
+			default:
+					RT_TRACE(COMP_DBG, "PHY_SetRF8225Bandwidth(): unknown Bandwidth: %#X\n",Bandwidth );
+				break;
+
+		}
+	}
+	}
+#endif
+}
+
+
+/*-----------------------------------------------------------------------------
+ * Function:	PHY_RF6052SetCckTxPower
+ *
+ * Overview:
+ *
+ * Input:       NONE
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ * When			Who		Remark
+ * 11/05/2008 	MHC		Simulate 8192series..
+ *
+ *---------------------------------------------------------------------------*/
+extern void PHY_RF6052SetCckTxPower(struct net_device* dev, u8	powerlevel)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u32				TxAGC=0;
+
+	if(priv->ieee80211->scanning == 1)
+		TxAGC = 0x3f;
+	else if(priv->bDynamicTxLowPower == true)//cosa 04282008 for cck long range
+		TxAGC = 0x22;
+	else
+		TxAGC = powerlevel;
+
+	//cosa add for lenovo, to pass the safety spec, don't increase power index for different rates.
+	if(priv->bIgnoreDiffRateTxPowerOffset)
+		TxAGC = powerlevel;
+
+	if(TxAGC > RF6052_MAX_TX_PWR)
+		TxAGC = RF6052_MAX_TX_PWR;
+
+	//printk("CCK PWR= %x\n", TxAGC);
+	rtl8192_setBBreg(dev, rTxAGC_CCK_Mcs32, bTxAGCRateCCK, TxAGC);
+
+}	/* PHY_RF6052SetCckTxPower */
+
+
+
+/*-----------------------------------------------------------------------------
+ * Function:	PHY_RF6052SetOFDMTxPower
+ *
+ * Overview:	For legacy and HY OFDM, we must read EEPROM TX power index for
+ *			different channel and read original value in TX power register area from
+ *			0xe00. We increase offset and original value to be correct tx pwr.
+ *
+ * Input:       NONE
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ * When			Who		Remark
+ * 11/05/2008 	MHC		Simulate 8192 series method.
+* 01/06/2009	MHC		1. Prevent Path B tx power overflow or underflow dure to
+ *						A/B pwr difference or legacy/HT pwr diff.
+ *						2. We concern with path B legacy/HT OFDM difference.
+ * 01/22/2009	MHC		Support new EPRO format from SD3.
+ *---------------------------------------------------------------------------*/
+ #if 1
+extern void PHY_RF6052SetOFDMTxPower(struct net_device* dev, u8 powerlevel)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u32 	writeVal, powerBase0, powerBase1;
+	u8 	index = 0;
+	u16 	RegOffset[6] = {0xe00, 0xe04, 0xe10, 0xe14, 0xe18, 0xe1c};
+	//u8 	byte0, byte1, byte2, byte3;
+	u8    Channel = priv->ieee80211->current_network.channel;
+	u8	rfa_pwr[4];
+	u8	rfa_lower_bound = 0, rfa_upper_bound = 0 /*, rfa_htpwr, rfa_legacypwr*/;
+	u8	i;
+	u8	rf_pwr_diff = 0;
+	u8	Legacy_pwrdiff=0, HT20_pwrdiff=0, BandEdge_Pwrdiff=0;
+	u8	ofdm_bandedge_chnl_low=0, ofdm_bandedge_chnl_high=0;
+
+
+	// We only care about the path A for legacy.
+	if (priv->EEPROMVersion != 2)
+	powerBase0 = powerlevel + (priv->LegacyHTTxPowerDiff & 0xf);
+	else if (priv->EEPROMVersion == 2)	// Defined by SD1 Jong
+	{
+		//
+		// 2009/01/21 MH Support new EEPROM format from SD3 requirement
+		//
+		Legacy_pwrdiff = priv->TxPwrLegacyHtDiff[RF90_PATH_A][Channel-1];
+		// For legacy OFDM, tx pwr always > HT OFDM pwr. We do not care Path B
+		// legacy OFDM pwr diff. NO BB register to notify HW.
+		powerBase0 = powerlevel + Legacy_pwrdiff;
+		//RTPRINT(FPHY, PHY_TXPWR, (" [LagacyToHT40 pwr diff = %d]\n", Legacy_pwrdiff));
+
+		// Band Edge scheme is enabled for FCC mode
+		if (priv->TxPwrbandEdgeFlag == 1/* && pHalData->ChannelPlan == 0*/)
+		{
+			ofdm_bandedge_chnl_low = 1;
+			ofdm_bandedge_chnl_high = 11;
+		#if 0//cosa, Todo: check ofdm 40MHz, when lower and duplicate, the bandedge chnl low=3, high=9
+			if (pHalData->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40)
+			{	// Is it the same with the document?
+				if(pHalData->nCur40MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_UPPER)
+				else if(pHalData->nCur40MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_LOWER;
+				else
+				pHalData->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
+			}
+		#endif
+			BandEdge_Pwrdiff = 0;
+			if (Channel <= ofdm_bandedge_chnl_low)
+				BandEdge_Pwrdiff = priv->TxPwrbandEdgeLegacyOfdm[RF90_PATH_A][0];
+			else if (Channel >= ofdm_bandedge_chnl_high)
+			{
+				BandEdge_Pwrdiff = priv->TxPwrbandEdgeLegacyOfdm[RF90_PATH_A][1];
+			}
+			powerBase0 -= BandEdge_Pwrdiff;
+			if (Channel <= ofdm_bandedge_chnl_low || Channel >= ofdm_bandedge_chnl_high)
+			{
+				//RTPRINT(FPHY, PHY_TXPWR, (" [OFDM band-edge channel = %d, pwr diff = %d]\n",
+				//Channel, BandEdge_Pwrdiff));
+			}
+		}
+		//RTPRINT(FPHY, PHY_TXPWR, (" [OFDM power base index = 0x%x]\n", powerBase0));
+	}
+	powerBase0 = (powerBase0<<24) | (powerBase0<<16) |(powerBase0<<8) |powerBase0;
+
+	//MCS rates
+	if(priv->EEPROMVersion == 2)
+	{
+		//Cosa add for new EEPROM content. 02102009
+
+		//Check HT20 to HT40 diff
+		if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20)
+		{
+			// HT 20<->40 pwr diff
+			HT20_pwrdiff = priv->TxPwrHt20Diff[RF90_PATH_A][Channel-1];
+
+			// Calculate Antenna pwr diff
+			if (HT20_pwrdiff < 8)	// 0~+7
+				powerlevel += HT20_pwrdiff;
+			else				// index8-15=-8~-1
+				powerlevel -= (16-HT20_pwrdiff);
+
+			//RTPRINT(FPHY, PHY_TXPWR, (" [HT20 to HT40 pwrdiff = %d]\n", HT20_pwrdiff));
+			//RTPRINT(FPHY, PHY_TXPWR, (" [MCS power base index = 0x%x]\n", powerlevel));
+		}
+
+		// Band Edge scheme is enabled for FCC mode
+		if (priv->TxPwrbandEdgeFlag == 1/* && pHalData->ChannelPlan == 0*/)
+		{
+			BandEdge_Pwrdiff = 0;
+			if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40)
+			{
+				if (Channel <= 3)
+					BandEdge_Pwrdiff = priv->TxPwrbandEdgeHt40[RF90_PATH_A][0];
+				else if (Channel >= 9)
+					BandEdge_Pwrdiff = priv->TxPwrbandEdgeHt40[RF90_PATH_A][1];
+				if (Channel <= 3 || Channel >= 9)
+				{
+					//RTPRINT(FPHY, PHY_TXPWR, (" [HT40 band-edge channel = %d, pwr diff = %d]\n",
+					//Channel, BandEdge_Pwrdiff));
+				}
+			}
+			else if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20)
+			{
+				if (Channel <= 1)
+					BandEdge_Pwrdiff = priv->TxPwrbandEdgeHt20[RF90_PATH_A][0];
+				else if (Channel >= 11)
+					BandEdge_Pwrdiff = priv->TxPwrbandEdgeHt20[RF90_PATH_A][1];
+				if (Channel <= 1 || Channel >= 11)
+				{
+					//RTPRINT(FPHY, PHY_TXPWR, (" [HT20 band-edge channel = %d, pwr diff = %d]\n",
+					//Channel, BandEdge_Pwrdiff));
+				}
+			}
+			powerlevel -= BandEdge_Pwrdiff;
+			//RTPRINT(FPHY, PHY_TXPWR, (" [MCS power base index = 0x%x]\n", powerlevel));
+		}
+	}
+	powerBase1 = powerlevel;
+	powerBase1 = (powerBase1<<24) | (powerBase1<<16) |(powerBase1<<8) |powerBase1;
+
+	//RTPRINT(FPHY, PHY_TXPWR, (" [Legacy/HT power index= %x/%x]\n", powerBase0, powerBase1));
+
+	for(index=0; index<6; index++)
+	{
+		//
+		// Index 0 & 1= legacy OFDM, 2-5=HT_MCS rate
+		//
+		//cosa add for lenovo, to pass the safety spec, don't increase power index for different rates.
+		if(priv->bIgnoreDiffRateTxPowerOffset)
+			writeVal = ((index<2)?powerBase0:powerBase1);
+		else
+		writeVal = priv->MCSTxPowerLevelOriginalOffset[index] + ((index<2)?powerBase0:powerBase1);
+
+		//RTPRINT(FPHY, PHY_TXPWR, ("Reg 0x%x, Original=%x writeVal=%x\n",
+		//RegOffset[index], priv->MCSTxPowerLevelOriginalOffset[index], writeVal));
+
+		//
+		// If path A and Path B coexist, we must limit Path A tx power.
+		// Protect Path B pwr over or under flow. We need to calculate upper and
+		// lower bound of path A tx power.
+		//
+		if (priv->rf_type == RF_2T2R)
+		{
+		#if 0//cosa, we have only one AntennaTxPwDiff
+			// HT OFDM
+			if (index > 1)
+			{
+				rf_pwr_diff = pHalData->AntennaTxPwDiff[0];
+			}
+			// Legacy OFDM
+			else
+			{
+				rf_pwr_diff = pHalData->AntTxPwDiffLegacy[0];
+			}
+		#endif
+			rf_pwr_diff = priv->AntennaTxPwDiff[0];
+			//RTPRINT(FPHY, PHY_TXPWR, ("2T2R RF-B to RF-A PWR DIFF=%d\n", rf_pwr_diff));
+
+			if (rf_pwr_diff >= 8)		// Diff=-8~-1
+			{	// Prevent underflow!!
+				rfa_lower_bound = 0x10-rf_pwr_diff;
+				//RTPRINT(FPHY, PHY_TXPWR, ("rfa_lower_bound= %d\n", rfa_lower_bound));
+			}
+			else if (rf_pwr_diff >= 0)	// Diff = 0-7
+			{
+				rfa_upper_bound = RF6052_MAX_TX_PWR-rf_pwr_diff;
+				//RTPRINT(FPHY, PHY_TXPWR, ("rfa_upper_bound= %d\n", rfa_upper_bound));
+			}
+		}
+
+		for (i=  0; i <4; i++)
+		{
+			rfa_pwr[i] = (u8)((writeVal & (0x7f<<(i*8)))>>(i*8));
+			if (rfa_pwr[i]  > RF6052_MAX_TX_PWR)
+				rfa_pwr[i]  = RF6052_MAX_TX_PWR;
+
+			//
+			// If path A and Path B coexist, we must limit Path A tx power.
+			// Protect Path B pwr over or under flow. We need to calculate upper and
+			// lower bound of path A tx power.
+			//
+			if (priv->rf_type == RF_2T2R)
+			{
+				if (rf_pwr_diff >= 8)		// Diff=-8~-1
+				{	// Prevent underflow!!
+					if (rfa_pwr[i] <rfa_lower_bound)
+					{
+						//RTPRINT(FPHY, PHY_TXPWR, ("Underflow"));
+						rfa_pwr[i] = rfa_lower_bound;
+					}
+				}
+				else if (rf_pwr_diff >= 1)	// Diff = 0-7
+				{	// Prevent overflow
+					if (rfa_pwr[i] > rfa_upper_bound)
+					{
+						//RTPRINT(FPHY, PHY_TXPWR, ("Overflow"));
+						rfa_pwr[i] = rfa_upper_bound;
+					}
+				}
+				//RTPRINT(FPHY, PHY_TXPWR, ("rfa_pwr[%d]=%x\n", i, rfa_pwr[i]));
+			}
+
+		}
+
+		//
+		// Add description: PWDB > threshold!!!High power issue!!
+		// We must decrease tx power !! Why is the value ???
+		//
+		if(priv->bDynamicTxHighPower == TRUE)
+		{
+			// For MCS rate
+			if(index > 1)
+			{
+				writeVal = 0x03030303;
+			}
+			// For Legacy rate
+			else
+			{
+				writeVal = (rfa_pwr[3]<<24) | (rfa_pwr[2]<<16) |(rfa_pwr[1]<<8) |rfa_pwr[0];
+			}
+			//RTPRINT(FPHY, PHY_TXPWR, ("HighPower=%08x\n", writeVal));
+		}
+		else
+		{
+			writeVal = (rfa_pwr[3]<<24) | (rfa_pwr[2]<<16) |(rfa_pwr[1]<<8) |rfa_pwr[0];
+			//RTPRINT(FPHY, PHY_TXPWR, ("NormalPower=%08x\n", writeVal));
+		}
+
+		//
+		// Write different rate set tx power index.
+		//
+		//if (DCMD_Test_Flag == 0)
+		rtl8192_setBBreg(dev, RegOffset[index], 0x7f7f7f7f, writeVal);
+	}
+
+}	/* PHY_RF6052SetOFDMTxPower */
+#else
+extern void PHY_RF6052SetOFDMTxPower(struct net_device* dev, u8 powerlevel)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u32 	writeVal, powerBase0, powerBase1;
+	u8 	index = 0;
+	u16 	RegOffset[6] = {0xe00, 0xe04, 0xe10, 0xe14, 0xe18, 0xe1c};
+	u8 	byte0, byte1, byte2, byte3;
+	u8    channel = priv->ieee80211->current_network.channel;
+
+	//Legacy OFDM rates
+	powerBase0 = powerlevel + (priv->LegacyHTTxPowerDiff & 0xf);
+	powerBase0 = (powerBase0<<24) | (powerBase0<<16) |(powerBase0<<8) |powerBase0;
+
+	//MCS rates HT OFDM
+	powerBase1 = powerlevel;
+	powerBase1 = (powerBase1<<24) | (powerBase1<<16) |(powerBase1<<8) |powerBase1;
+
+	//printk("Legacy/HT PWR= %x/%x\n", powerBase0, powerBase1);
+
+	for(index=0; index<6; index++)
+	{
+		//
+		// Index 0 & 1= legacy OFDM, 2-5=HT_MCS rate
+		//
+		writeVal = priv->MCSTxPowerLevelOriginalOffset[index] +  ((index<2)?powerBase0:powerBase1);
+
+		//printk("Index = %d Original=%x writeVal=%x\n", index, priv->MCSTxPowerLevelOriginalOffset[index], writeVal);
+
+		byte0 = (u8)(writeVal & 0x7f);
+		byte1 = (u8)((writeVal & 0x7f00)>>8);
+		byte2 = (u8)((writeVal & 0x7f0000)>>16);
+		byte3 = (u8)((writeVal & 0x7f000000)>>24);
+
+		// Max power index = 0x3F Range = 0-0x3F
+		if(byte0 > RF6052_MAX_TX_PWR)
+			byte0 = RF6052_MAX_TX_PWR;
+		if(byte1 > RF6052_MAX_TX_PWR)
+			byte1 = RF6052_MAX_TX_PWR;
+		if(byte2 > RF6052_MAX_TX_PWR)
+			byte2 = RF6052_MAX_TX_PWR;
+		if(byte3 > RF6052_MAX_TX_PWR)
+			byte3 = RF6052_MAX_TX_PWR;
+
+		//
+		// Add description: PWDB > threshold!!!High power issue!!
+		// We must decrease tx power !! Why is the value ???
+		//
+		if(priv->bDynamicTxHighPower == true)
+		{
+			// For MCS rate
+			if(index > 1)
+			{
+				writeVal = 0x03030303;
+			}
+			// For Legacy rate
+			else
+			{
+				writeVal = (byte3<<24) | (byte2<<16) |(byte1<<8) |byte0;
+			}
+		}
+		else
+		{
+			writeVal = (byte3<<24) | (byte2<<16) |(byte1<<8) |byte0;
+		}
+
+		//
+		// Write different rate set tx power index.
+		//
+		rtl8192_setBBreg(dev, RegOffset[index], 0x7f7f7f7f, writeVal);
+	}
+
+}	/* PHY_RF6052SetOFDMTxPower */
+#endif
+
+RT_STATUS PHY_RF6052_Config(struct net_device* dev)
+{
+	struct r8192_priv 			*priv = ieee80211_priv(dev);
+	RT_STATUS				rtStatus = RT_STATUS_SUCCESS;
+	//RF90_RADIO_PATH_E		eRFPath;
+	//BB_REGISTER_DEFINITION_T	*pPhyReg;
+	//u32						OrgStoreRFIntSW[RF90_PATH_D+1];
+
+	//
+	// Initialize general global value
+	//
+	// TODO: Extend RF_PATH_C and RF_PATH_D in the future
+	if(priv->rf_type == RF_1T1R)
+		priv->NumTotalRFPath = 1;
+	else
+		priv->NumTotalRFPath = 2;
+
+	//
+	// Config BB and RF
+	//
+//	switch( priv->bRegHwParaFile )
+//	{
+//		case 0:
+//			phy_RF6052_Config_HardCode(dev);
+//			break;
+
+//		case 1:
+			rtStatus = phy_RF6052_Config_ParaFile(dev);
+//			break;
+
+//		case 2:
+			// Partial Modify.
+//			phy_RF6052_Config_HardCode(dev);
+//			phy_RF6052_Config_ParaFile(dev);
+//			break;
+
+//		default:
+//			phy_RF6052_Config_HardCode(dev);
+//			break;
+//	}
+	return rtStatus;
+
+}
+
+void phy_RF6052_Config_HardCode(struct net_device* dev)
+{
+
+	// Set Default Bandwidth to 20M
+	//Adapter->HalFunc	.SetBWModeHandler(Adapter, HT_CHANNEL_WIDTH_20);
+
+	// TODO: Set Default Channel to channel one for RTL8225
+
+}
+
+RT_STATUS phy_RF6052_Config_ParaFile(struct net_device* dev)
+{
+	u32			u4RegValue = 0;
+	//static s1Byte		szRadioAFile[] = RTL819X_PHY_RADIO_A;
+	//static s1Byte		szRadioBFile[] = RTL819X_PHY_RADIO_B;
+	//static s1Byte		szRadioBGMFile[] = RTL819X_PHY_RADIO_B_GM;
+	u8			eRFPath;
+	RT_STATUS		rtStatus = RT_STATUS_SUCCESS;
+	struct r8192_priv 	*priv = ieee80211_priv(dev);
+	BB_REGISTER_DEFINITION_T	*pPhyReg;
+	//u8			eCheckItem;
+
+
+	//3//-----------------------------------------------------------------
+	//3// <2> Initialize RF
+	//3//-----------------------------------------------------------------
+	//for(eRFPath = RF90_PATH_A; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
+	for(eRFPath = 0; eRFPath <priv->NumTotalRFPath; eRFPath++)
+	{
+
+		pPhyReg = &priv->PHYRegDef[eRFPath];
+
+		/*----Store original RFENV control type----*/
+		switch(eRFPath)
+		{
+		case RF90_PATH_A:
+		case RF90_PATH_C:
+			u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs, bRFSI_RFENV);
+			break;
+		case RF90_PATH_B :
+		case RF90_PATH_D:
+			u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs, bRFSI_RFENV<<16);
+			break;
+		}
+
+		/*----Set RF_ENV enable----*/
+		rtl8192_setBBreg(dev, pPhyReg->rfintfe, bRFSI_RFENV<<16, 0x1);
+
+		/*----Set RF_ENV output high----*/
+		rtl8192_setBBreg(dev, pPhyReg->rfintfo, bRFSI_RFENV, 0x1);
+
+		/* Set bit number of Address and Data for RF register */
+		rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0); 	// Set 1 to 4 bits for 8255
+		rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireDataLength, 0x0);	// Set 0 to 12  bits for 8255
+
+
+		/*----Initialize RF fom connfiguration file----*/
+		switch(eRFPath)
+		{
+		case RF90_PATH_A:
+#if	RTL8190_Download_Firmware_From_Header
+			rtStatus= rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath);
+#else
+			rtStatus = PHY_ConfigRFWithParaFile(Adapter, (char* )&szRadioAFile, (RF90_RADIO_PATH_E)eRFPath);
+#endif
+			break;
+		case RF90_PATH_B:
+#if	RTL8190_Download_Firmware_From_Header
+			rtStatus= rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath);
+#else
+			if(priv->rf_type == RF_2T2R_GREEN)
+				rtStatus = PHY_ConfigRFWithParaFile(Adapter, (ps1Byte)&szRadioBGMFile, (RF90_RADIO_PATH_E)eRFPath);
+			else
+				rtStatus = PHY_ConfigRFWithParaFile(Adapter, (char* )&szRadioBFile, (RF90_RADIO_PATH_E)eRFPath);
+#endif
+			break;
+		case RF90_PATH_C:
+			break;
+		case RF90_PATH_D:
+			break;
+		}
+
+		/*----Restore RFENV control type----*/;
+		switch(eRFPath)
+		{
+		case RF90_PATH_A:
+		case RF90_PATH_C:
+			rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV, u4RegValue);
+			break;
+		case RF90_PATH_B :
+		case RF90_PATH_D:
+			rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV<<16, u4RegValue);
+			break;
+		}
+
+		if(rtStatus != RT_STATUS_SUCCESS){
+			printk("phy_RF6052_Config_ParaFile():Radio[%d] Fail!!", eRFPath);
+			goto phy_RF6052_Config_ParaFile_Fail;
+		}
+
+	}
+
+	RT_TRACE(COMP_INIT, "<---phy_RF6052_Config_ParaFile()\n");
+	return rtStatus;
+
+phy_RF6052_Config_ParaFile_Fail:
+	return rtStatus;
+}
+
+
+//
+// ==> RF shadow Operation API Code Section!!!
+//
+/*-----------------------------------------------------------------------------
+ * Function:	PHY_RFShadowRead
+ *				PHY_RFShadowWrite
+ *				PHY_RFShadowCompare
+ *				PHY_RFShadowRecorver
+ *				PHY_RFShadowCompareAll
+ *				PHY_RFShadowRecorverAll
+ *				PHY_RFShadowCompareFlagSet
+ *				PHY_RFShadowRecorverFlagSet
+ *
+ * Overview:	When we set RF register, we must write shadow at first.
+ *			When we are running, we must compare shadow abd locate error addr.
+ *			Decide to recorver or not.
+ *
+ * Input:       NONE
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ * When			Who		Remark
+ * 11/20/2008 	MHC		Create Version 0.
+ *
+ *---------------------------------------------------------------------------*/
+extern u32 PHY_RFShadowRead(
+	struct net_device		* dev,
+	RF90_RADIO_PATH_E	eRFPath,
+	u32					Offset)
+{
+	return	RF_Shadow[eRFPath][Offset].Value;
+
+}	/* PHY_RFShadowRead */
+
+
+extern void PHY_RFShadowWrite(
+	struct net_device		* dev,
+	u32	eRFPath,
+	u32					Offset,
+	u32					Data)
+{
+	//RF_Shadow[eRFPath][Offset].Value = (Data & bMask20Bits);
+	RF_Shadow[eRFPath][Offset].Value = (Data & bRFRegOffsetMask);
+	RF_Shadow[eRFPath][Offset].Driver_Write = true;
+
+}	/* PHY_RFShadowWrite */
+
+
+extern void PHY_RFShadowCompare(
+	struct net_device		* dev,
+	RF90_RADIO_PATH_E	eRFPath,
+	u32					Offset)
+{
+	u32	reg;
+
+	// Check if we need to check the register
+	if (RF_Shadow[eRFPath][Offset].Compare == true)
+	{
+		reg = rtl8192_phy_QueryRFReg(dev, eRFPath, Offset, bRFRegOffsetMask);
+		// Compare shadow and real rf register for 20bits!!
+		if (RF_Shadow[eRFPath][Offset].Value != reg)
+		{
+			// Locate error position.
+			RF_Shadow[eRFPath][Offset].ErrorOrNot = true;
+			RT_TRACE(COMP_INIT, "PHY_RFShadowCompare RF-%d Addr%02xErr = %05x", eRFPath, Offset, reg);
+		}
+	}
+
+}	/* PHY_RFShadowCompare */
+
+extern void PHY_RFShadowRecorver(
+	struct net_device		* dev,
+	RF90_RADIO_PATH_E	eRFPath,
+	u32					Offset)
+{
+	// Check if the address is error
+	if (RF_Shadow[eRFPath][Offset].ErrorOrNot == true)
+	{
+		// Check if we need to recorver the register.
+		if (RF_Shadow[eRFPath][Offset].Recorver == true)
+		{
+			rtl8192_phy_SetRFReg(dev, eRFPath, Offset, bRFRegOffsetMask, RF_Shadow[eRFPath][Offset].Value);
+			RT_TRACE(COMP_INIT, "PHY_RFShadowRecorver RF-%d Addr%02x=%05x",
+			eRFPath, Offset, RF_Shadow[eRFPath][Offset].Value);
+		}
+	}
+
+}	/* PHY_RFShadowRecorver */
+
+
+extern void PHY_RFShadowCompareAll(struct net_device * dev)
+{
+	u32		eRFPath;
+	u32		Offset;
+
+	for (eRFPath = 0; eRFPath < RF6052_MAX_PATH; eRFPath++)
+	{
+		for (Offset = 0; Offset <= RF6052_MAX_REG; Offset++)
+		{
+			PHY_RFShadowCompare(dev, (RF90_RADIO_PATH_E)eRFPath, Offset);
+		}
+	}
+
+}	/* PHY_RFShadowCompareAll */
+
+
+extern void PHY_RFShadowRecorverAll(struct net_device * dev)
+{
+	u32		eRFPath;
+	u32		Offset;
+
+	for (eRFPath = 0; eRFPath < RF6052_MAX_PATH; eRFPath++)
+	{
+		for (Offset = 0; Offset <= RF6052_MAX_REG; Offset++)
+		{
+			PHY_RFShadowRecorver(dev, (RF90_RADIO_PATH_E)eRFPath, Offset);
+		}
+	}
+
+}	/* PHY_RFShadowRecorverAll */
+
+
+extern void PHY_RFShadowCompareFlagSet(
+	struct net_device 		* dev,
+	RF90_RADIO_PATH_E	eRFPath,
+	u32					Offset,
+	u8					Type)
+{
+	// Set True or False!!!
+	RF_Shadow[eRFPath][Offset].Compare = Type;
+
+}	/* PHY_RFShadowCompareFlagSet */
+
+
+extern void PHY_RFShadowRecorverFlagSet(
+	struct net_device 		* dev,
+	RF90_RADIO_PATH_E	eRFPath,
+	u32					Offset,
+	u8					Type)
+{
+	// Set True or False!!!
+	RF_Shadow[eRFPath][Offset].Recorver= Type;
+
+}	/* PHY_RFShadowRecorverFlagSet */
+
+
+extern void PHY_RFShadowCompareFlagSetAll(struct net_device  * dev)
+{
+	u32		eRFPath;
+	u32		Offset;
+
+	for (eRFPath = 0; eRFPath < RF6052_MAX_PATH; eRFPath++)
+	{
+		for (Offset = 0; Offset <= RF6052_MAX_REG; Offset++)
+		{
+			// 2008/11/20 MH For S3S4 test, we only check reg 26/27 now!!!!
+			if (Offset != 0x26 && Offset != 0x27)
+				PHY_RFShadowCompareFlagSet(dev, (RF90_RADIO_PATH_E)eRFPath, Offset, FALSE);
+			else
+				PHY_RFShadowCompareFlagSet(dev, (RF90_RADIO_PATH_E)eRFPath, Offset, TRUE);
+		}
+	}
+
+}	/* PHY_RFShadowCompareFlagSetAll */
+
+
+extern void PHY_RFShadowRecorverFlagSetAll(struct net_device  * dev)
+{
+	u32		eRFPath;
+	u32		Offset;
+
+	for (eRFPath = 0; eRFPath < RF6052_MAX_PATH; eRFPath++)
+	{
+		for (Offset = 0; Offset <= RF6052_MAX_REG; Offset++)
+		{
+			// 2008/11/20 MH For S3S4 test, we only check reg 26/27 now!!!!
+			if (Offset != 0x26 && Offset != 0x27)
+				PHY_RFShadowRecorverFlagSet(dev, (RF90_RADIO_PATH_E)eRFPath, Offset, FALSE);
+			else
+				PHY_RFShadowRecorverFlagSet(dev, (RF90_RADIO_PATH_E)eRFPath, Offset, TRUE);
+		}
+	}
+
+}	/* PHY_RFShadowCompareFlagSetAll */
+
+
+
+extern void PHY_RFShadowRefresh(struct net_device  * dev)
+{
+	u32		eRFPath;
+	u32		Offset;
+
+	for (eRFPath = 0; eRFPath < RF6052_MAX_PATH; eRFPath++)
+	{
+		for (Offset = 0; Offset <= RF6052_MAX_REG; Offset++)
+		{
+			RF_Shadow[eRFPath][Offset].Value = 0;
+			RF_Shadow[eRFPath][Offset].Compare = false;
+			RF_Shadow[eRFPath][Offset].Recorver  = false;
+			RF_Shadow[eRFPath][Offset].ErrorOrNot = false;
+			RF_Shadow[eRFPath][Offset].Driver_Write = false;
+		}
+	}
+
+}	/* PHY_RFShadowRead */
+
+/* End of HalRf6052.c */
diff --git a/drivers/staging/rtl8192su/r8192S_rtl6052.h b/drivers/staging/rtl8192su/r8192S_rtl6052.h
new file mode 100644
index 00000000000..916603ceaae
--- /dev/null
+++ b/drivers/staging/rtl8192su/r8192S_rtl6052.h
@@ -0,0 +1,134 @@
+/******************************************************************************
+ *
+ *     (c) Copyright  2008, RealTEK Technologies Inc. All Rights Reserved.
+ *
+ * Module:	HalRf.h	( Header File)
+ *
+ * Note:	Collect every HAL RF type exter API or constant.
+ *
+ * Function:
+ *
+ * Export:
+ *
+ * Abbrev:
+ *
+ * History:
+ * Data			Who		Remark
+ *
+ * 09/25/2008	MHC		Create initial version.
+ *
+ *
+******************************************************************************/
+/* Check to see if the file has been included already.  */
+
+
+/*--------------------------Define Parameters-------------------------------*/
+
+//
+// For RF 6052 Series
+//
+#define	RF6052_MAX_TX_PWR	0x3F
+#define	RF6052_MAX_REG		0x3F
+#define	RF6052_MAX_PATH		4
+/*--------------------------Define Parameters-------------------------------*/
+
+
+/*------------------------------Define structure----------------------------*/
+
+/*------------------------------Define structure----------------------------*/
+
+
+/*------------------------Export global variable----------------------------*/
+/*------------------------Export global variable----------------------------*/
+
+/*------------------------Export Marco Definition---------------------------*/
+
+/*------------------------Export Marco Definition---------------------------*/
+
+
+/*--------------------------Exported Function prototype---------------------*/
+//======================================================
+#if 1
+// Function prototypes for HalPhy8225.c
+//1======================================================
+extern void PHY_SetRF0222DBandwidth(struct net_device* dev , HT_CHANNEL_WIDTH Bandwidth);	//20M or 40M;
+extern void PHY_SetRF8225Bandwidth(	struct net_device* dev ,	HT_CHANNEL_WIDTH Bandwidth);
+extern bool PHY_RF8225_Config(struct net_device* dev );
+extern void phy_RF8225_Config_HardCode(struct net_device*	dev);
+extern bool phy_RF8225_Config_ParaFile(struct net_device* dev);
+extern void PHY_SetRF8225CckTxPower(struct net_device* dev ,u8 powerlevel);
+extern void PHY_SetRF8225OfdmTxPower(struct net_device* dev ,u8        powerlevel);
+extern void PHY_SetRF0222DOfdmTxPower(struct net_device* dev ,u8 powerlevel);
+extern void PHY_SetRF0222DCckTxPower(struct net_device* dev ,u8        powerlevel);
+
+//1======================================================
+// Function prototypes for HalPhy8256.c
+//1======================================================
+extern void PHY_SetRF8256Bandwidth(struct net_device* dev , HT_CHANNEL_WIDTH Bandwidth);
+extern void PHY_RF8256_Config(struct net_device* dev);
+extern void phy_RF8256_Config_ParaFile(struct net_device* dev);
+extern void PHY_SetRF8256CCKTxPower(struct net_device*	dev, u8	powerlevel);
+extern void PHY_SetRF8256OFDMTxPower(struct net_device* dev, u8 powerlevel);
+#endif
+
+//
+// RF RL6052 Series API
+//
+extern	void		RF_ChangeTxPath(struct net_device  * dev, u16 DataRate);
+extern	void		PHY_RF6052SetBandwidth(struct net_device  * dev,HT_CHANNEL_WIDTH	Bandwidth);
+extern	void		PHY_RF6052SetCckTxPower(struct net_device  * dev, u8	powerlevel);
+extern	void		PHY_RF6052SetOFDMTxPower(struct net_device  * dev, u8 powerlevel);
+extern	RT_STATUS	PHY_RF6052_Config(struct net_device  * dev);
+extern void PHY_RFShadowRefresh( struct net_device  		* dev);
+extern void PHY_RFShadowWrite( struct net_device* dev, u32 eRFPath, u32 Offset, u32 Data);
+#if 0
+//
+// RF Shadow operation relative API
+//
+extern	u32
+PHY_RFShadowRead(
+	struct net_device  		* dev,
+	RF90_RADIO_PATH_E	eRFPath,
+	u32					Offset);
+extern void
+PHY_RFShadowCompare(
+	struct net_device  		* dev,
+	RF90_RADIO_PATH_E	eRFPath,
+	u32					Offset);
+extern void
+PHY_RFShadowRecorver(
+	struct net_device  		* dev,
+	RF90_RADIO_PATH_E	eRFPath,
+	u32					Offset);
+extern void
+PHY_RFShadowCompareAll(
+	struct net_device  		* dev);
+extern void
+PHY_RFShadowRecorverAll(
+	struct net_device  		* dev);
+extern void
+PHY_RFShadowCompareFlagSet(
+	struct net_device  		* dev,
+	RF90_RADIO_PATH_E	eRFPath,
+	u32					Offset,
+	u8					Type);
+extern void
+PHY_RFShadowRecorverFlagSet(
+	struct net_device  		* dev,
+	RF90_RADIO_PATH_E	eRFPath,
+	u32					Offset,
+	u8					Type);
+extern void
+PHY_RFShadowCompareFlagSetAll(
+	struct net_device  		* dev);
+extern void
+PHY_RFShadowRecorverFlagSetAll(
+	struct net_device  		* dev);
+extern void
+PHY_RFShadowRefresh(
+	struct net_device  		* dev);
+#endif
+/*--------------------------Exported Function prototype---------------------*/
+
+
+/* End of HalRf.h */
diff --git a/drivers/staging/rtl8192su/r8192S_rtl8225.c b/drivers/staging/rtl8192su/r8192S_rtl8225.c
new file mode 100644
index 00000000000..09465df2def
--- /dev/null
+++ b/drivers/staging/rtl8192su/r8192S_rtl8225.c
@@ -0,0 +1,292 @@
+
+#include "r8192U.h"
+#include "r8192S_hw.h"
+#include "r8192S_phyreg.h"
+#include "r8192S_phy.h"
+#include "r8192S_rtl8225.h"
+
+/*---------------------Define local function prototype-----------------------*/
+void phy_RF8225_Config_HardCode(struct net_device* dev );
+bool phy_RF8225_Config_ParaFile(struct net_device* dev );
+/*---------------------Define local function prototype-----------------------*/
+void PHY_SetRF8225OfdmTxPower(struct net_device* dev ,u8	powerlevel)
+{
+
+}
+
+
+
+void PHY_SetRF8225CckTxPower(	struct net_device* dev ,	u8 powerlevel)
+{
+
+}
+
+
+// TODO: The following RF 022D related function should be removed to HalPhy0222D.c.
+void PHY_SetRF0222DOfdmTxPower(struct net_device* dev ,u8 powerlevel)
+{
+	//TODO: We should set RF TxPower for RF 0222D here!!
+}
+
+
+
+void PHY_SetRF0222DCckTxPower(struct net_device* dev ,u8	powerlevel)
+{
+	//TODO: We should set RF TxPower for RF 0222D here!!
+}
+
+
+/*-----------------------------------------------------------------------------
+ * Function:    PHY_SetRF0222DBandwidth()
+ *
+ * Overview:    This function is called by SetBWModeCallback8190Pci() only
+ *
+ * Input:       PADAPTER				Adapter
+ *			WIRELESS_BANDWIDTH_E	Bandwidth	//20M or 40M
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Note:		For RF type 0222D
+ *---------------------------------------------------------------------------*/
+ //just in phy
+void PHY_SetRF0222DBandwidth(struct net_device* dev , HT_CHANNEL_WIDTH	 Bandwidth)	//20M or 40M
+{
+	u8			eRFPath;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+
+	//if (IS_HARDWARE_TYPE_8192S(dev))
+	if (1)
+	{
+#ifndef RTL92SE_FPGA_VERIFY
+		switch(Bandwidth)
+		{
+			case HT_CHANNEL_WIDTH_20:
+#ifdef FIB_MODIFICATION
+				write_nic_byte(dev, rFPGA0_AnalogParameter2, 0x58);
+#endif
+				rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A, RF_CHNLBW, BIT10|BIT11, 0x01);
+				break;
+			case HT_CHANNEL_WIDTH_20_40:
+#ifdef FIB_MODIFICATION
+				write_nic_byte(dev, rFPGA0_AnalogParameter2, 0x18);
+#endif
+				rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A, RF_CHNLBW, BIT10|BIT11, 0x00);
+				break;
+			default:
+				;//RT_TRACE(COMP_DBG, DBG_LOUD, ("PHY_SetRF8225Bandwidth(): unknown Bandwidth: %#X\n",Bandwidth ));
+				break;
+		}
+#endif
+	}
+	else
+	{
+	for(eRFPath = 0; eRFPath <priv->NumTotalRFPath; eRFPath++)
+	{
+		switch(Bandwidth)
+		{
+			case HT_CHANNEL_WIDTH_20:
+					//rtl8192_phy_SetRFReg(Adapter, (RF90_RADIO_PATH_E)RF90_PATH_A, RF_CHNLBW, (BIT10|BIT11), 0x01);
+				break;
+			case HT_CHANNEL_WIDTH_20_40:
+					//rtl8192_phy_SetRFReg(Adapter, (RF90_RADIO_PATH_E)RF90_PATH_A, RF_CHNLBW, (BIT10|BIT11), 0x00);
+				break;
+			default:
+				;//RT_TRACE(COMP_DBG, DBG_LOUD, ("PHY_SetRF8225Bandwidth(): unknown Bandwidth: %#X\n",Bandwidth ));
+				break;
+
+		}
+	}
+	}
+
+}
+
+// TODO: Aabove RF 022D related function should be removed to HalPhy0222D.c.
+
+/*-----------------------------------------------------------------------------
+ * Function:    PHY_SetRF8225Bandwidth()
+ *
+ * Overview:    This function is called by SetBWModeCallback8190Pci() only
+ *
+ * Input:       PADAPTER				Adapter
+ *			WIRELESS_BANDWIDTH_E	Bandwidth	//20M or 40M
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Note:		8225(zebra1) support 20M only
+ *---------------------------------------------------------------------------*/
+ //just in phy
+void PHY_SetRF8225Bandwidth(struct net_device* dev ,HT_CHANNEL_WIDTH Bandwidth)	//20M or 40M
+{
+	u8			eRFPath;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	//for(eRFPath = RF90_PATH_A; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
+	for(eRFPath = 0; eRFPath <priv->NumTotalRFPath; eRFPath++)
+	{
+		switch(Bandwidth)
+		{
+			case HT_CHANNEL_WIDTH_20:
+				// TODO: Update the parameters here
+				break;
+			case HT_CHANNEL_WIDTH_20_40:
+				RT_TRACE(COMP_DBG, "SetChannelBandwidth8190Pci():8225 does not support 40M mode\n");
+				break;
+			default:
+				RT_TRACE(COMP_DBG, "PHY_SetRF8225Bandwidth(): unknown Bandwidth: %#X\n",Bandwidth );
+				break;
+
+		}
+	}
+
+}
+
+//just in phy
+bool PHY_RF8225_Config(struct net_device* dev )
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	bool	rtStatus = true;
+	//RF90_RADIO_PATH_E			eRFPath;
+	//BB_REGISTER_DEFINITION_T	*pPhyReg;
+	//u32						OrgStoreRFIntSW[RF90_PATH_D+1];
+
+	//
+	// Initialize general global value
+	//
+	// TODO: Extend RF_PATH_C and RF_PATH_D in the future
+	priv->NumTotalRFPath = 2;
+
+	//
+	// Config BB and RF
+	//
+	//switch( Adapter->MgntInfo.bRegHwParaFile )
+	//{
+	//	case 0:
+	//		phy_RF8225_Config_HardCode(dev);
+	//		break;
+
+	//	case 1:
+	//		rtStatus = phy_RF8225_Config_ParaFile(dev);
+	//		break;
+
+	//	case 2:
+			// Partial Modify.
+			phy_RF8225_Config_HardCode(dev);
+			phy_RF8225_Config_ParaFile(dev);
+	//		break;
+
+	//	default:
+	//		phy_RF8225_Config_HardCode(dev);
+	//		break;
+	//}
+	return rtStatus;
+
+}
+
+//just in 8225
+void phy_RF8225_Config_HardCode(struct net_device* dev)
+{
+
+	// Set Default Bandwidth to 20M
+	//Adapter->HalFunc	.SetBWModeHandler(Adapter, HT_CHANNEL_WIDTH_20);
+
+	// TODO: Set Default Channel to channel one for RTL8225
+
+}
+
+//just in 8225
+bool phy_RF8225_Config_ParaFile(struct net_device* dev)
+{
+	u32					u4RegValue = 0;
+	//static char				szRadioAFile[] = RTL819X_PHY_RADIO_A;
+	//static char				szRadioBFile[] = RTL819X_PHY_RADIO_B;
+	u8					eRFPath;
+	bool				rtStatus = true;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	BB_REGISTER_DEFINITION_T	*pPhyReg;
+	//u8						eCheckItem;
+
+#if	1
+	//3//-----------------------------------------------------------------
+	//3// <2> Initialize RF
+	//3//-----------------------------------------------------------------
+	//for(eRFPath = RF90_PATH_A; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
+	for(eRFPath = 0; eRFPath <priv->NumTotalRFPath; eRFPath++)
+	{
+
+		pPhyReg = &priv->PHYRegDef[eRFPath];
+
+		/*----Store original RFENV control type----*/
+		switch(eRFPath)
+		{
+		case RF90_PATH_A:
+		case RF90_PATH_C:
+			u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs, bRFSI_RFENV);
+			break;
+		case RF90_PATH_B :
+		case RF90_PATH_D:
+			u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs, bRFSI_RFENV<<16);
+			break;
+		}
+
+		/*----Set RF_ENV enable----*/
+		rtl8192_setBBreg(dev, pPhyReg->rfintfe, bRFSI_RFENV<<16, 0x1);
+
+		/*----Set RF_ENV output high----*/
+		rtl8192_setBBreg(dev, pPhyReg->rfintfo, bRFSI_RFENV, 0x1);
+
+		/* Set bit number of Address and Data for RF register */
+		rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0); 	// Set 1 to 4 bits for 8255
+		rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireDataLength, 0x0);	// Set 0 to 12  bits for 8255
+
+
+		/*----Initialize RF fom connfiguration file----*/
+		switch(eRFPath)
+		{
+		case RF90_PATH_A:
+			//rtStatus = PHY_ConfigRFWithParaFile(dev, (char* )&szRadioAFile, (RF90_RADIO_PATH_E)eRFPath);
+			rtStatus = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath);
+			break;
+		case RF90_PATH_B:
+			//rtStatus = PHY_ConfigRFWithParaFile(dev, (char* )&szRadioBFile, (RF90_RADIO_PATH_E)eRFPath);
+			rtStatus = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath);
+			break;
+		case RF90_PATH_C:
+			break;
+		case RF90_PATH_D:
+			break;
+		}
+
+		/*----Restore RFENV control type----*/;
+		switch(eRFPath)
+		{
+		case RF90_PATH_A:
+		case RF90_PATH_C:
+			rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV, u4RegValue);
+			break;
+		case RF90_PATH_B :
+		case RF90_PATH_D:
+			rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV<<16, u4RegValue);
+			break;
+		}
+
+		if(rtStatus == false){
+			//RT_TRACE(COMP_FPGA, DBG_LOUD, ("phy_RF8225_Config_ParaFile():Radio[%d] Fail!!", eRFPath));
+			goto phy_RF8225_Config_ParaFile_Fail;
+		}
+
+	}
+
+	//RT_TRACE(COMP_INIT, DBG_LOUD, ("<---phy_RF8225_Config_ParaFile()\n"));
+	return rtStatus;
+
+phy_RF8225_Config_ParaFile_Fail:
+#endif
+	return rtStatus;
+}
+
+
diff --git a/drivers/staging/rtl8192su/r8192S_rtl8225.h b/drivers/staging/rtl8192su/r8192S_rtl8225.h
new file mode 100644
index 00000000000..8a647284af3
--- /dev/null
+++ b/drivers/staging/rtl8192su/r8192S_rtl8225.h
@@ -0,0 +1,30 @@
+/*
+  This is part of the rtl8180-sa2400 driver
+  released under the GPL (See file COPYING for details).
+  Copyright (c) 2005 Andrea Merello <andreamrl@tiscali.it>
+
+  This files contains programming code for the rtl8256
+  radio frontend.
+
+  *Many* thanks to Realtek Corp. for their great support!
+
+*/
+
+#ifndef RTL8225H
+#define RTL8225H
+
+#ifdef RTL8190P
+#define RTL819X_TOTAL_RF_PATH 4 //for 90P
+#else
+#define RTL819X_TOTAL_RF_PATH 2 //for 8192U
+#endif
+extern void PHY_SetRF0222DBandwidth(struct net_device* dev , HT_CHANNEL_WIDTH Bandwidth);	//20M or 40M;
+extern void PHY_SetRF8225Bandwidth(	struct net_device* dev ,	HT_CHANNEL_WIDTH Bandwidth);
+extern bool PHY_RF8225_Config(struct net_device* dev );
+extern void phy_RF8225_Config_HardCode(struct net_device*	dev);
+extern bool phy_RF8225_Config_ParaFile(struct net_device* dev);
+extern void PHY_SetRF8225CckTxPower(struct net_device* dev ,u8 powerlevel);
+extern void PHY_SetRF8225OfdmTxPower(struct net_device* dev ,u8        powerlevel);
+extern void PHY_SetRF0222DOfdmTxPower(struct net_device* dev ,u8 powerlevel);
+extern void PHY_SetRF0222DCckTxPower(struct net_device* dev ,u8        powerlevel);
+#endif
diff --git a/drivers/staging/rtl8192su/r8192U.h b/drivers/staging/rtl8192su/r8192U.h
new file mode 100644
index 00000000000..a2365587b1c
--- /dev/null
+++ b/drivers/staging/rtl8192su/r8192U.h
@@ -0,0 +1,2112 @@
+/*
+   This is part of rtl8187 OpenSource driver.
+   Copyright (C) Andrea Merello 2004-2005  <andreamrl@tiscali.it>
+   Released under the terms of GPL (General Public Licence)
+
+   Parts of this driver are based on the GPL part of the
+   official realtek driver
+
+   Parts of this driver are based on the rtl8192 driver skeleton
+   from Patric Schenke & Andres Salomon
+
+   Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
+
+   We want to tanks the Authors of those projects and the Ndiswrapper
+   project Authors.
+*/
+
+#ifndef R819xU_H
+#define R819xU_H
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+//#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/netdevice.h>
+//#include <linux/pci.h>
+#include <linux/usb.h>
+#include <linux/etherdevice.h>
+#include <linux/delay.h>
+#include <linux/rtnetlink.h>	//for rtnl_lock()
+#include <linux/wireless.h>
+#include <linux/timer.h>
+#include <linux/proc_fs.h>	// Necessary because we use the proc fs
+#include <linux/if_arp.h>
+#include <linux/random.h>
+#include <linux/version.h>
+#include <asm/io.h>
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27))
+#include <asm/semaphore.h>
+#endif
+#include "ieee80211.h"
+
+#ifdef RTL8192SU
+#include "r8192S_firmware.h"
+#else
+#include "r819xU_firmware.h"
+#endif
+
+//#define RTL8192U
+#define RTL819xU_MODULE_NAME "rtl819xU"
+//added for HW security, john.0629
+#define FALSE 0
+#define TRUE 1
+#define MAX_KEY_LEN     61
+#define KEY_BUF_SIZE    5
+
+#define BIT0            0x00000001
+#define BIT1            0x00000002
+#define BIT2            0x00000004
+#define BIT3            0x00000008
+#define BIT4            0x00000010
+#define BIT5            0x00000020
+#define BIT6            0x00000040
+#define BIT7            0x00000080
+#define BIT8            0x00000100
+#define BIT9            0x00000200
+#define BIT10           0x00000400
+#define BIT11           0x00000800
+#define BIT12           0x00001000
+#define BIT13           0x00002000
+#define BIT14           0x00004000
+#define BIT15           0x00008000
+#define BIT16           0x00010000
+#define BIT17           0x00020000
+#define BIT18           0x00040000
+#define BIT19           0x00080000
+#define BIT20           0x00100000
+#define BIT21           0x00200000
+#define BIT22           0x00400000
+#define BIT23           0x00800000
+#define BIT24           0x01000000
+#define BIT25           0x02000000
+#define BIT26           0x04000000
+#define BIT27           0x08000000
+#define BIT28           0x10000000
+#define BIT29           0x20000000
+#define BIT30           0x40000000
+#define BIT31           0x80000000
+
+// Rx smooth factor
+#define	Rx_Smooth_Factor		20
+#if 0 //we need to use RT_TRACE instead DMESG as RT_TRACE will clearly show debug level wb.
+#define DMESG(x,a...) printk(KERN_INFO RTL819xU_MODULE_NAME ": " x "\n", ## a)
+#define DMESGW(x,a...) printk(KERN_WARNING RTL819xU_MODULE_NAME ": WW:" x "\n", ## a)
+#define DMESGE(x,a...) printk(KERN_WARNING RTL819xU_MODULE_NAME ": EE:" x "\n", ## a)
+#else
+#define DMESG(x,a...)
+#define DMESGW(x,a...)
+#define DMESGE(x,a...)
+extern u32 rt_global_debug_component;
+#define RT_TRACE(component, x, args...) \
+do { if(rt_global_debug_component & component) \
+	printk(KERN_DEBUG RTL819xU_MODULE_NAME ":" x "\n" , \
+	       ##args);\
+}while(0);
+//----------------------------------------------------------------------
+//// Get 8192SU  Rx descriptor. Added by Roger, 2008.04.15.
+////----------------------------------------------------------------------
+#define RX_DESC_SIZE 24
+#define RX_DRV_INFO_SIZE_UNIT   8
+
+#define IS_UNDER_11N_AES_MODE(_ieee)  ((_ieee->pHTInfo->bCurrentHTSupport==TRUE) &&\
+									(_ieee->pairwise_key_type==KEY_TYPE_CCMP))
+
+#define COMP_TRACE				BIT0		// For function call tracing.
+#define COMP_DBG				BIT1		// Only for temporary debug message.
+#define COMP_INIT				BIT2		// during driver initialization / halt / reset.
+
+
+#define COMP_RECV				BIT3		// Reveive part data path.
+#define COMP_SEND				BIT4		// Send part path.
+#define COMP_IO					BIT5		// I/O Related. Added by Annie, 2006-03-02.
+#define COMP_POWER				BIT6		// 802.11 Power Save mode or System/Device Power state related.
+#define COMP_EPROM				BIT7		// 802.11 link related: join/start BSS, leave BSS.
+#define COMP_SWBW				BIT8	// For bandwidth switch.
+#define COMP_POWER_TRACKING			BIT9	//FOR 8190 TX POWER TRACKING
+#define COMP_TURBO				BIT10	// For Turbo Mode related. By Annie, 2005-10-21.
+#define COMP_QOS				BIT11	// For QoS.
+#define COMP_RATE				BIT12	// For Rate Adaptive mechanism, 2006.07.02, by rcnjko.
+#define COMP_LPS					BIT13	// For Radio Measurement.
+#define COMP_DIG				BIT14	// For DIG, 2006.09.25, by rcnjko.
+#define COMP_PHY	 			BIT15
+#define COMP_CH					BIT16	//channel setting debug
+#define COMP_TXAGC				BIT17	// For Tx power, 060928, by rcnjko.
+#define COMP_HIPWR				BIT18	// For High Power Mechanism, 060928, by rcnjko.
+#define COMP_HALDM				BIT19	// For HW Dynamic Mechanism, 061010, by rcnjko.
+#define COMP_SEC			        BIT20	// Event handling
+#define COMP_LED				BIT21	// For LED.
+#define COMP_RF					BIT22	// For RF.
+//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
+#define COMP_RXDESC				BIT23	// Show Rx desc information for SD3 debug. Added by Annie, 2006-07-15.
+//1//1Attention Please!!!<11n or 8190 specific code should be put below this line>
+//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
+#define COMP_FIRMWARE				BIT24	//for firmware downloading
+#define COMP_HT					BIT25	// For 802.11n HT related information. by Emily 2006-8-11
+#define COMP_AMSDU				BIT26	// For A-MSDU Debugging
+
+#define COMP_SCAN				BIT27
+#define COMP_CMD				BIT28
+#define COMP_DOWN				BIT29  //for rm driver module
+#define COMP_RESET				BIT30  //for silent reset
+#define COMP_ERR				BIT31 //for error out, always on
+#endif
+
+#define RTL819x_DEBUG
+#ifdef RTL819x_DEBUG
+#define assert(expr) \
+        if (!(expr)) {                                  \
+                printk( "Assertion failed! %s,%s,%s,line=%d\n", \
+                #expr,__FILE__,__FUNCTION__,__LINE__);          \
+        }
+//wb added to debug out data buf
+//if you want print DATA buffer related BA, please set ieee80211_debug_level to DATA|BA
+#define RT_DEBUG_DATA(level, data, datalen)      \
+        do{ if ((rt_global_debug_component & (level)) == (level))   \
+                {       \
+                        int i;                                  \
+                        u8* pdata = (u8*) data;                 \
+                        printk(KERN_DEBUG RTL819xU_MODULE_NAME ": %s()\n", __FUNCTION__);   \
+                        for(i=0; i<(int)(datalen); i++)                 \
+                        {                                               \
+                                printk("%2x ", pdata[i]);               \
+                                if ((i+1)%16 == 0) printk("\n");        \
+                        }                               \
+                        printk("\n");                   \
+                }                                       \
+        } while (0)
+#else
+#define assert(expr) do {} while (0)
+#define RT_DEBUG_DATA(level, data, datalen) do {} while(0)
+#endif /* RTL8169_DEBUG */
+
+//#ifdef RTL8192SU
+	//2TODO: We should define 8192S firmware related macro settings here!!
+	#define RTL819X_DEFAULT_RF_TYPE				RF_1T2R
+	#define RTL819X_TOTAL_RF_PATH				2
+
+	//#define Rtl819XFwBootArray					Rtl8192UsbFwBootArray
+	//#define Rtl819XFwMainArray					Rtl8192UsbFwMainArray
+	//#define Rtl819XFwDataArray					Rtl8192UsbFwDataArray
+
+	#define Rtl819XMACPHY_Array_PG				Rtl8192UsbMACPHY_Array_PG
+	#define Rtl819XMACPHY_Array					Rtl8192UsbMACPHY_Array
+	#define Rtl819XPHY_REGArray					Rtl8192UsbPHY_REGArray
+	#define Rtl819XPHY_REG_1T2RArray				Rtl8192UsbPHY_REG_1T2RArray
+	//#define Rtl819XRadioA_Array					Rtl8192UsbRadioA_Array
+	//#define Rtl819XRadioB_Array					Rtl8192UsbRadioB_Array
+	#define Rtl819XRadioC_Array					Rtl8192UsbRadioC_Array
+	#define Rtl819XRadioD_Array					Rtl8192UsbRadioD_Array
+
+	//2008.11.06 Add.
+	#define Rtl819XFwImageArray					Rtl8192SUFwImgArray
+	#define Rtl819XMAC_Array						Rtl8192SUMAC_2T_Array
+	#define Rtl819XAGCTAB_Array					Rtl8192SUAGCTAB_Array
+	#define Rtl819XPHY_REG_Array					Rtl8192SUPHY_REG_2T2RArray
+	#define Rtl819XPHY_REG_to1T1R_Array			Rtl8192SUPHY_ChangeTo_1T1RArray
+	#define Rtl819XPHY_REG_to1T2R_Array			Rtl8192SUPHY_ChangeTo_1T2RArray
+	#define Rtl819XPHY_REG_to2T2R_Array			Rtl8192SUPHY_ChangeTo_2T2RArray
+	#define Rtl819XPHY_REG_Array_PG				Rtl8192SUPHY_REG_Array_PG
+	#define Rtl819XRadioA_Array					Rtl8192SURadioA_1T_Array
+	#define Rtl819XRadioB_Array					Rtl8192SURadioB_Array
+	#define Rtl819XRadioB_GM_Array				Rtl8192SURadioB_GM_Array
+	#define Rtl819XRadioA_to1T_Array				Rtl8192SURadioA_to1T_Array
+	#define Rtl819XRadioA_to2T_Array				Rtl8192SURadioA_to2T_Array
+//#endif
+
+//
+// Queue Select Value in TxDesc
+//
+#define QSLT_BK                                 0x1
+#define QSLT_BE                                 0x0
+#define QSLT_VI                                 0x4
+#define QSLT_VO                                 0x6
+#define QSLT_BEACON                             0x10
+#define QSLT_HIGH                               0x11
+#define QSLT_MGNT                               0x12
+#define QSLT_CMD                                0x13
+
+#define DESC90_RATE1M                           0x00
+#define DESC90_RATE2M                           0x01
+#define DESC90_RATE5_5M                         0x02
+#define DESC90_RATE11M                          0x03
+#define DESC90_RATE6M                           0x04
+#define DESC90_RATE9M                           0x05
+#define DESC90_RATE12M                          0x06
+#define DESC90_RATE18M                          0x07
+#define DESC90_RATE24M                          0x08
+#define DESC90_RATE36M                          0x09
+#define DESC90_RATE48M                          0x0a
+#define DESC90_RATE54M                          0x0b
+#define DESC90_RATEMCS0                         0x00
+#define DESC90_RATEMCS1                         0x01
+#define DESC90_RATEMCS2                         0x02
+#define DESC90_RATEMCS3                         0x03
+#define DESC90_RATEMCS4                         0x04
+#define DESC90_RATEMCS5                         0x05
+#define DESC90_RATEMCS6                         0x06
+#define DESC90_RATEMCS7                         0x07
+#define DESC90_RATEMCS8                         0x08
+#define DESC90_RATEMCS9                         0x09
+#define DESC90_RATEMCS10                        0x0a
+#define DESC90_RATEMCS11                        0x0b
+#define DESC90_RATEMCS12                        0x0c
+#define DESC90_RATEMCS13                        0x0d
+#define DESC90_RATEMCS14                        0x0e
+#define DESC90_RATEMCS15                        0x0f
+#define DESC90_RATEMCS32                        0x20
+
+//#ifdef RTL8192SU
+// CCK Rates, TxHT = 0
+#define DESC92S_RATE1M					0x00
+#define DESC92S_RATE2M					0x01
+#define DESC92S_RATE5_5M				0x02
+#define DESC92S_RATE11M					0x03
+
+// OFDM Rates, TxHT = 0
+#define DESC92S_RATE6M					0x04
+#define DESC92S_RATE9M					0x05
+#define DESC92S_RATE12M					0x06
+#define DESC92S_RATE18M					0x07
+#define DESC92S_RATE24M					0x08
+#define DESC92S_RATE36M					0x09
+#define DESC92S_RATE48M					0x0a
+#define DESC92S_RATE54M					0x0b
+
+// MCS Rates, TxHT = 1
+#define DESC92S_RATEMCS0				0x0c
+#define DESC92S_RATEMCS1				0x0d
+#define DESC92S_RATEMCS2				0x0e
+#define DESC92S_RATEMCS3				0x0f
+#define DESC92S_RATEMCS4				0x10
+#define DESC92S_RATEMCS5				0x11
+#define DESC92S_RATEMCS6				0x12
+#define DESC92S_RATEMCS7				0x13
+#define DESC92S_RATEMCS8				0x14
+#define DESC92S_RATEMCS9				0x15
+#define DESC92S_RATEMCS10				0x16
+#define DESC92S_RATEMCS11				0x17
+#define DESC92S_RATEMCS12				0x18
+#define DESC92S_RATEMCS13				0x19
+#define DESC92S_RATEMCS14				0x1a
+#define DESC92S_RATEMCS15				0x1b
+#define DESC92S_RATEMCS15_SG			0x1c
+#define DESC92S_RATEMCS32				0x20
+//#endif
+
+#define RTL819X_DEFAULT_RF_TYPE RF_1T2R
+
+#define IEEE80211_WATCH_DOG_TIME    2000
+#define		PHY_Beacon_RSSI_SLID_WIN_MAX		10
+//for txpowertracking by amy
+#define 	OFDM_Table_Length	19
+#define	CCK_Table_length	12
+
+#ifdef RTL8192SU
+//
+//Tx Descriptor for RLT8192SU(Normal mode)
+//
+typedef struct _tx_desc_819x_usb {
+	// DWORD 0
+	u16		PktSize;//:16;
+	u8		Offset;//:8;
+	u8		Type:2;	// Reserved for MAC header Frame Type subfield.
+	u8		LastSeg:1;
+	u8		FirstSeg:1;
+	u8		LINIP:1;
+	u8		AMSDU:1;
+	u8		GF:1;
+	u8		OWN:1;
+
+	// DWORD 1
+	u8		MacID:5;
+	u8		MoreData:1;
+	u8		MOREFRAG:1;
+	u8		PIFS:1;
+	u8		QueueSelect:5;
+	u8		AckPolicy:2;
+	u8		NoACM:1;
+	u8		NonQos:1;
+	u8		KeyID:2;
+	u8		OUI:1;
+	u8		PktType:1;
+	u8		EnDescID:1;
+	u8		SecType:2;
+	u8		HTC:1;	//padding0
+	u8		WDS:1;	//padding1
+	u8		PktOffset:5;	//padding_len (hw)
+	u8		HWPC:1;
+
+	// DWORD 2
+	u32		DataRetryLmt:6;
+	u32		RetryLmtEn:1;
+	u32		TSFL:5;
+	u32		RTSRC:6;	// Reserved for HW RTS Retry Count.
+	u32		DATARC:6;	// Reserved for HW DATA Retry Count.
+	u32		Rsvd1:5;
+	u32		AllowAggregation:1;
+	u32		BK:1;	//Aggregation break.
+	u32		OwnMAC:1;
+
+	// DWORD 3
+	u8		NextHeadPage;//:8;
+	u8		TailPage;//:8;
+	u16		Seq:12;
+	u16		Frag:4;
+
+	// DWORD 4
+	u32		RTSRate:6;
+	u32		DisRTSFB:1;
+	u32		RTSRateFBLmt:4;
+	u32		CTS2Self:1;
+	u32		RTSEn:1;
+	u32		RaBRSRID:3;	//Rate adaptive BRSR ID.
+	u32		TxHT:1;
+	u32		TxShort:1;//for data
+	u32		TxBandwidth:1;
+	u32		TxSubCarrier:2;
+	u32		STBC:2;
+	u32		RD:1;
+	u32		RTSHT:1;
+	u32		RTSShort:1;
+	u32		RTSBW:1;
+	u32		RTSSubcarrier:2;
+	u32		RTSSTBC:2;
+	u32		USERATE:1;
+	// DWORD 5
+	u32		PktID:9;
+	u32		TxRate:6;
+	u32		DISFB:1;
+	u32		DataRateFBLmt:5;
+	u32		TxAGC:11;
+
+	// DWORD 6
+	u16		IPChkSum;//:16;
+	u16		TCPChkSum;//:16;
+
+	// DWORD 7
+	//u16		TxBuffSize;//:16;//pcie
+        u16     	TxBufferSize;
+	u16		IPHdrOffset:8;
+	u16		Rsvd2:7;
+	u16		TCPEn:1;
+}tx_desc_819x_usb, *ptx_desc_819x_usb;
+typedef struct _tx_status_desc_8192s_usb{
+
+	//DWORD 0
+	u8		TxRate:6;
+	u8		Rsvd1:1;
+	u8		BandWidth:1;
+	u8		RTSRate:6;
+	u8		AGGLS:1;
+	u8		AGG:1;
+	u8		RTSRC:6;
+	u8		DataRC:6;
+	u8		FailCause:2;
+	u8		TxOK:1;
+	u8		Own:1;
+
+	//DWORD 1
+	u16		Seq:12;
+	u8		QueueSel:5;
+	u8		MACID:5;
+	u8		PwrMgt:1;
+	u8		MoreData:1;
+	u8		Rsvd2;
+
+	//DWORD 2
+	u8		RxAGC1;
+	u8		RxAGC2;
+	u8		RxAGC3;
+	u8		RxAGC4;
+}tx_status_desc_8192s_usb, *ptx_status_desc_8192s_usb;
+#else
+/* for rtl819x */
+typedef struct _tx_desc_819x_usb {
+        //DWORD 0
+        u16	PktSize;
+        u8	Offset;
+        u8	Reserved0:3;
+        u8	CmdInit:1;
+        u8	LastSeg:1;
+        u8	FirstSeg:1;
+        u8	LINIP:1;
+        u8	OWN:1;
+
+        //DWORD 1
+        u8	TxFWInfoSize;
+        u8	RATid:3;
+        u8	DISFB:1;
+        u8	USERATE:1;
+        u8	MOREFRAG:1;
+        u8	NoEnc:1;
+        u8	PIFS:1;
+        u8	QueueSelect:5;
+        u8	NoACM:1;
+        u8	Reserved1:2;
+        u8	SecCAMID:5;
+        u8	SecDescAssign:1;
+        u8	SecType:2;
+
+        //DWORD 2
+        u16	TxBufferSize;
+        //u16 Reserved2;
+        u8	ResvForPaddingLen:7;
+        u8	Reserved3:1;
+        u8	Reserved4;
+
+        //DWORD 3, 4, 5
+        u32	Reserved5;
+        u32	Reserved6;
+        u32	Reserved7;
+}tx_desc_819x_usb, *ptx_desc_819x_usb;
+#endif
+
+#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
+typedef struct _tx_desc_819x_usb_aggr_subframe {
+	//DWORD 0
+	u16	PktSize;
+	u8	Offset;
+	u8	TxFWInfoSize;
+
+	//DWORD 1
+	u8	RATid:3;
+	u8	DISFB:1;
+	u8	USERATE:1;
+	u8	MOREFRAG:1;
+	u8	NoEnc:1;
+	u8	PIFS:1;
+	u8	QueueSelect:5;
+	u8	NoACM:1;
+	u8	Reserved1:2;
+	u8	SecCAMID:5;
+	u8	SecDescAssign:1;
+	u8	SecType:2;
+	u8	PacketID:7;
+	u8	OWN:1;
+}tx_desc_819x_usb_aggr_subframe, *ptx_desc_819x_usb_aggr_subframe;
+#endif
+
+
+#ifdef RTL8192SU
+//
+//Tx Descriptor for RLT8192SU(Load FW mode)
+//
+typedef struct _tx_desc_cmd_819x_usb{
+       // DWORD 0
+	u16		PktSize;
+	u8		Offset;
+	u8		Rsvd0:4;
+	u8		LINIP:1;
+	u8		Rsvd1:2;
+	u8		OWN:1;
+
+	// DWORD 1, 2, 3, 4, 5, 6 are all reserved.
+	u32		Rsvd2;
+	u32		Rsvd3;
+	u32		Rsvd4;
+	u32		Rsvd5;
+	u32		Rsvd6;
+	u32		Rsvd7;
+
+	// DWORD 7
+	u16		TxBuffSize;//pcie
+	u16		Rsvd8;
+}tx_desc_cmd_819x_usb, *ptx_desc_cmd_819x_usb;
+//
+//H2C Command for RLT8192SU(Host TxCmd)
+//
+typedef struct _tx_h2c_desc_cmd_8192s_usb{
+       // DWORD 0
+	u32		PktSize:16;
+	u32		Offset:8;
+	u32		Rsvd0:7;
+	u32		OWN:1;
+
+	// DWORD 1
+	u32		Rsvd1:8;
+	u32		QSEL:5;
+	u32		Rsvd2:19;
+
+	// DWORD 2
+	u32		Rsvd3;
+
+	// DWORD 3
+	u32		NextHeadPage:8;
+	u32		TailPage:8;
+	u32		Rsvd4:16;
+
+	// DWORD 4, 5, 6, 7
+	u32		Rsvd5;
+	u32		Rsvd6;
+	u32		Rsvd7;
+	u32		Rsvd8;
+}tx_h2c_desc_cmd_8192s_usb, *ptx_h2c_desc_cmd_8192s_usb;
+
+
+typedef struct _tx_h2c_cmd_hdr_8192s_usb{
+       // DWORD 0
+	u32		CmdLen:16;
+	u32		ElementID:8;
+	u32		CmdSeq:8;
+
+	// DWORD 1
+	u32		Rsvd0;
+}tx_h2c_cmd_hdr_8192s_usb, *ptx_h2c_cmd_hdr_8192s_usb;
+#else
+typedef struct _tx_desc_cmd_819x_usb {
+        //DWORD 0
+	u16	Reserved0;
+	u8	Reserved1;
+	u8	Reserved2:3;
+	u8	CmdInit:1;
+	u8	LastSeg:1;
+	u8	FirstSeg:1;
+	u8	LINIP:1;
+	u8	OWN:1;
+
+        //DOWRD 1
+	//u32	Reserved3;
+	u8	TxFWInfoSize;
+	u8	Reserved3;
+	u8	QueueSelect;
+	u8	Reserved4;
+
+        //DOWRD 2
+	u16 	TxBufferSize;
+	u16	Reserved5;
+
+       //DWORD 3,4,5
+	//u32	TxBufferAddr;
+	//u32	NextDescAddress;
+	u32	Reserved6;
+	u32	Reserved7;
+	u32	Reserved8;
+}tx_desc_cmd_819x_usb, *ptx_desc_cmd_819x_usb;
+#endif
+
+#ifdef RTL8192SU
+typedef struct _tx_fwinfo_819x_usb{
+	//DWORD 0
+	u8			TxRate:7;
+	u8			CtsEnable:1;
+	u8			RtsRate:7;
+	u8			RtsEnable:1;
+	u8			TxHT:1;
+	u8			Short:1;						//Short PLCP for CCK, or short GI for 11n MCS
+	u8			TxBandwidth:1;				// This is used for HT MCS rate only.
+	u8			TxSubCarrier:2;				// This is used for legacy OFDM rate only.
+	u8			STBC:2;
+	u8			AllowAggregation:1;
+	u8			RtsHT:1;						//Interpre RtsRate field as high throughput data rate
+	u8			RtsShort:1;					//Short PLCP for CCK, or short GI for 11n MCS
+	u8			RtsBandwidth:1;				// This is used for HT MCS rate only.
+	u8			RtsSubcarrier:2;				// This is used for legacy OFDM rate only.
+	u8			RtsSTBC:2;
+	u8			EnableCPUDur:1;				//Enable firmware to recalculate and assign packet duration
+
+	//DWORD 1
+	u32			RxMF:2;
+	u32			RxAMD:3;
+        u32			Reserved1:3;
+	u32			TxAGCOffSet:4;//TxAGCOffset:4;
+	u32			TxAGCSign:1;
+	u32			Tx_INFO_RSVD:6;
+	u32			PacketID:13;
+}tx_fwinfo_819x_usb, *ptx_fwinfo_819x_usb;
+#else
+typedef struct _tx_fwinfo_819x_usb {
+        //DOWRD 0
+        u8		TxRate:7;
+        u8		CtsEnable:1;
+        u8		RtsRate:7;
+        u8		RtsEnable:1;
+        u8		TxHT:1;
+        u8		Short:1;                //Short PLCP for CCK, or short GI for 11n MCS
+        u8		TxBandwidth:1;          // This is used for HT MCS rate only.
+        u8		TxSubCarrier:2;         // This is used for legacy OFDM rate only.
+        u8		STBC:2;
+        u8		AllowAggregation:1;
+        u8		RtsHT:1;                //Interpre RtsRate field as high throughput data rate
+        u8		RtsShort:1;             //Short PLCP for CCK, or short GI for 11n MCS
+        u8		RtsBandwidth:1;         // This is used for HT MCS rate only.
+        u8		RtsSubcarrier:2;        // This is used for legacy OFDM rate only.
+        u8		RtsSTBC:2;
+        u8		EnableCPUDur:1;         //Enable firmware to recalculate and assign packet duration
+
+        //DWORD 1
+        u32		RxMF:2;
+        u32		RxAMD:3;
+        u32		TxPerPktInfoFeedback:1;//1 indicate Tx info gathtered by firmware and returned by Rx Cmd
+        u32		Reserved1:2;
+        u32		TxAGCOffSet:4;
+        u32		TxAGCSign:1;
+        u32		Tx_INFO_RSVD:6;
+	u32		PacketID:13;
+        //u32                Reserved;
+}tx_fwinfo_819x_usb, *ptx_fwinfo_819x_usb;
+#endif
+
+typedef struct rtl8192_rx_info {
+	struct urb *urb;
+	struct net_device *dev;
+	u8 out_pipe;
+}rtl8192_rx_info ;
+
+#ifdef RTL8192SU
+//typedef struct _RX_DESC_STATUS_8192SU{
+typedef struct rx_desc_819x_usb{
+	//DWORD 0
+	u16		Length:14;
+	u16		CRC32:1;
+	u16		ICV:1;
+	u8		RxDrvInfoSize:4;
+	u8		Security:3;
+	u8		Qos:1;
+	u8		Shift:2;
+	u8		PHYStatus:1;
+	u8		SWDec:1;
+	u8		LastSeg:1;
+	u8		FirstSeg:1;
+	u8		EOR:1;
+	u8		Own:1;
+
+	//DWORD 1
+	u16		MACID:5;
+	u16		TID:4;
+	u16		HwRsvd:5;
+	u16		PAGGR:1;
+	u16		FAGGR:1;
+	u8		A1_FIT:4;
+	u8		A2_FIT:4;
+	u8		PAM:1;
+	u8		PWR:1;
+	u8		MoreData:1;
+	u8		MoreFrag:1;
+	u8		Type:2;
+	u8		MC:1;
+	u8		BC:1;
+
+	//DWORD 2
+	u16		Seq:12;
+	u16		Frag:4;
+#ifdef USB_RX_AGGREGATION_SUPPORT
+	u8		UsbAggPktNum;//:8;
+#else
+	u8		NextPktLen;//:8;
+#endif
+	u8		Rsvd0:6;
+	u8		NextIND:1;
+	u8		Rsvd1:1;
+
+	//DWORD 3
+	u8		RxMCS:6;
+	u8		RxHT:1;
+	u8		AMSDU:1;
+	u8		SPLCP:1;
+	u8		BW:1;
+	u8		HTC:1;
+	u8		TCPChkRpt:1;
+	u8		IPChkRpt:1;
+	u8		TCPChkValID:1;
+	u8		HwPCErr:1;
+	u8		HwPCInd:1;
+	u16		IV0;//:16;
+
+	//DWORD 4
+	u32		IV1;
+
+	//DWORD 5
+	u32		TSFL;
+//}RX_DESC_STATUS_8192SU, *PRX_DESC_STATUS_8192SU;
+}rx_desc_819x_usb, *prx_desc_819x_usb;
+#else
+typedef struct rx_desc_819x_usb{
+	//DOWRD 0
+	u16                 Length:14;
+	u16                 CRC32:1;
+	u16                 ICV:1;
+	u8                  RxDrvInfoSize;
+	u8                  Shift:2;
+	u8                  PHYStatus:1;
+	u8                  SWDec:1;
+	//u8                LastSeg:1;
+	//u8                FirstSeg:1;
+	//u8                EOR:1;
+	//u8                OWN:1;
+	u8                  Reserved1:4;
+
+	//DWORD 1
+	u32                 Reserved2;
+
+	//DWORD 2
+	//u32               Reserved3;
+
+	//DWORD 3
+	//u32                BufferAddress;
+
+}rx_desc_819x_usb, *prx_desc_819x_usb;
+#endif
+
+#ifdef USB_RX_AGGREGATION_SUPPORT
+typedef struct _rx_desc_819x_usb_aggr_subframe{
+	//DOWRD 0
+	u16			Length:14;
+	u16			CRC32:1;
+	u16			ICV:1;
+	u8			Offset;
+	u8			RxDrvInfoSize;
+	//DOWRD 1
+	u8			Shift:2;
+	u8			PHYStatus:1;
+	u8			SWDec:1;
+	u8			Reserved1:4;
+	u8			Reserved2;
+	u16			Reserved3;
+	//DWORD 2
+	//u4Byte		Reserved3;
+	//DWORD 3
+	//u4Byte           	BufferAddress;
+}rx_desc_819x_usb_aggr_subframe, *prx_desc_819x_usb_aggr_subframe;
+#endif
+
+#ifdef RTL8192SU
+//
+// Driver info are written to the begining of the RxBuffer
+//
+//typedef struct _RX_DRIVER_INFO_8192S{
+typedef struct rx_drvinfo_819x_usb{
+	//
+	// Driver info contain PHY status and other variabel size info
+	// PHY Status content as below
+	//
+
+	//DWORD 0
+	/*u4Byte			gain_0:7;
+	u4Byte			trsw_0:1;
+	u4Byte			gain_1:7;
+	u4Byte			trsw_1:1;
+	u4Byte			gain_2:7;
+	u4Byte			trsw_2:1;
+	u4Byte			gain_3:7;
+	u4Byte			trsw_3:1;	*/
+	u8			gain_trsw[4];
+
+	//DWORD 1
+	/*u4Byte			pwdb_all:8;
+	u4Byte			cfosho_0:8;
+	u4Byte			cfosho_1:8;
+	u4Byte			cfosho_2:8;*/
+	u8			pwdb_all;
+	u8			cfosho[4];
+
+	//DWORD 2
+	/*u4Byte			cfosho_3:8;
+	u4Byte			cfotail_0:8;
+	u4Byte			cfotail_1:8;
+	u4Byte			cfotail_2:8;*/
+	u8			cfotail[4];
+
+	//DWORD 3
+	/*u4Byte			cfotail_3:8;
+	u4Byte			rxevm_0:8;
+	u4Byte			rxevm_1:8;
+	u4Byte			rxsnr_0:8;*/
+	char			        rxevm[2];
+	char			        rxsnr[4];
+
+	//DWORD 4
+	/*u4Byte			rxsnr_1:8;
+	u4Byte			rxsnr_2:8;
+	u4Byte			rxsnr_3:8;
+	u4Byte			pdsnr_0:8;*/
+	u8			pdsnr[2];
+
+	//DWORD 5
+	/*u4Byte			pdsnr_1:8;
+	u4Byte			csi_current_0:8;
+	u4Byte			csi_current_1:8;
+	u4Byte			csi_target_0:8;*/
+	u8			csi_current[2];
+	u8			csi_target[2];
+
+	//DWORD 6
+	/*u4Byte			csi_target_1:8;
+	u4Byte			sigevm:8;
+	u4Byte			max_ex_pwr:8;
+	u4Byte			ex_intf_flag:1;
+	u4Byte			sgi_en:1;
+	u4Byte			rxsc:2;
+	u4Byte			reserve:4;*/
+	u8			sigevm;
+	u8			max_ex_pwr;
+	u8			ex_intf_flag:1;
+	u8			sgi_en:1;
+	u8			rxsc:2;
+	u8			reserve:4;
+
+}rx_drvinfo_819x_usb, *prx_drvinfo_819x_usb;
+#else
+typedef struct rx_drvinfo_819x_usb{
+	//DWORD 0
+	u16                 Reserved1:12;
+	u16                 PartAggr:1;
+	u16                 FirstAGGR:1;
+	u16                 Reserved2:2;
+
+	u8                  RxRate:7;
+	u8                  RxHT:1;
+
+	u8                  BW:1;
+	u8                  SPLCP:1;
+	u8                  Reserved3:2;
+	u8                  PAM:1;
+	u8                  Mcast:1;
+	u8                  Bcast:1;
+	u8                  Reserved4:1;
+
+	//DWORD 1
+	u32                  TSFL;
+
+}rx_drvinfo_819x_usb, *prx_drvinfo_819x_usb;
+#endif
+
+	#define HWSET_MAX_SIZE_92S	128
+#ifdef RTL8192SU
+	#define MAX_802_11_HEADER_LENGTH 40
+	#define MAX_PKT_AGG_NUM		256
+	#define TX_PACKET_SHIFT_BYTES USB_HWDESC_HEADER_LEN
+#else
+	#define MAX_802_11_HEADER_LENGTH        (40 + MAX_FIRMWARE_INFORMATION_SIZE)
+	#define	MAX_PKT_AGG_NUM		64
+	#define TX_PACKET_SHIFT_BYTES (USB_HWDESC_HEADER_LEN + sizeof(tx_fwinfo_819x_usb))
+#endif
+
+#define MAX_DEV_ADDR_SIZE		8  /* support till 64 bit bus width OS */
+#define MAX_FIRMWARE_INFORMATION_SIZE   32 /*2006/04/30 by Emily forRTL8190*/
+//#define MAX_802_11_HEADER_LENGTH        (40 + MAX_FIRMWARE_INFORMATION_SIZE)
+#define ENCRYPTION_MAX_OVERHEAD		128
+#define	USB_HWDESC_HEADER_LEN		sizeof(tx_desc_819x_usb)
+//#define TX_PACKET_SHIFT_BYTES 	  	(USB_HWDESC_HEADER_LEN + sizeof(tx_fwinfo_819x_usb))
+#define MAX_FRAGMENT_COUNT		8
+#ifdef RTL8192U
+#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
+#define MAX_TRANSMIT_BUFFER_SIZE			32000
+#else
+#define MAX_TRANSMIT_BUFFER_SIZE			8000
+#endif
+#else
+#define MAX_TRANSMIT_BUFFER_SIZE  	(1600+(MAX_802_11_HEADER_LENGTH+ENCRYPTION_MAX_OVERHEAD)*MAX_FRAGMENT_COUNT)
+#endif
+#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
+#define TX_PACKET_DRVAGGR_SUBFRAME_SHIFT_BYTES (sizeof(tx_desc_819x_usb_aggr_subframe) + sizeof(tx_fwinfo_819x_usb))
+#endif
+#define scrclng					4		// octets for crc32 (FCS, ICV)
+
+typedef enum rf_optype
+{
+	RF_OP_By_SW_3wire = 0,
+	RF_OP_By_FW,
+	RF_OP_MAX
+}rf_op_type;
+/* 8190 Loopback Mode definition */
+typedef enum _rtl819xUsb_loopback{
+	RTL819xU_NO_LOOPBACK = 0,
+	RTL819xU_MAC_LOOPBACK = 1,
+	RTL819xU_DMA_LOOPBACK = 2,
+	RTL819xU_CCK_LOOPBACK = 3,
+}rtl819xUsb_loopback_e;
+
+/* for rtl819x */
+typedef enum _RT_STATUS{
+	RT_STATUS_SUCCESS = 0,
+	RT_STATUS_FAILURE = 1,
+	RT_STATUS_PENDING = 2,
+	RT_STATUS_RESOURCE = 3
+}RT_STATUS,*PRT_STATUS;
+
+//#ifdef RTL8192SU
+typedef enum _RTL8192SUSB_LOOPBACK{
+	RTL8192SU_NO_LOOPBACK = 0,
+	RTL8192SU_MAC_LOOPBACK = 1,
+	RTL8192SU_DMA_LOOPBACK = 2,
+	RTL8192SU_CCK_LOOPBACK = 3,
+}RTL8192SUSB_LOOPBACK_E;
+//#endif
+
+
+#if 0
+/* due to rtl8192 firmware */
+typedef enum _desc_packet_type_e{
+	DESC_PACKET_TYPE_INIT = 0,
+	DESC_PACKET_TYPE_NORMAL = 1,
+}desc_packet_type_e;
+
+typedef enum _firmware_source{
+	FW_SOURCE_IMG_FILE = 0,
+	FW_SOURCE_HEADER_FILE = 1,		//from header file
+}firmware_source_e, *pfirmware_source_e;
+
+typedef enum _firmware_status{
+	FW_STATUS_0_INIT = 0,
+	FW_STATUS_1_MOVE_BOOT_CODE = 1,
+	FW_STATUS_2_MOVE_MAIN_CODE = 2,
+	FW_STATUS_3_TURNON_CPU = 3,
+	FW_STATUS_4_MOVE_DATA_CODE = 4,
+	FW_STATUS_5_READY = 5,
+}firmware_status_e;
+
+typedef struct _rt_firmare_seg_container {
+	u16	seg_size;
+	u8	*seg_ptr;
+}fw_seg_container, *pfw_seg_container;
+
+#ifdef RTL8192SU
+//--------------------------------------------------------------------------------
+// 8192S Firmware related
+//--------------------------------------------------------------------------------
+typedef  struct _RT_8192S_FIRMWARE_PRIV { //8-bytes alignment required
+
+	//--- LONG WORD 0 ----
+	u32		RegulatoryClass;
+	u32		Rfintfs;
+
+	//--- LONG WORD 1 ----
+	u32		ChipVer;
+	u32		HCISel;
+
+	//--- LONG WORD 2 ----
+	u32		IBKMode;
+	u32		Rsvd00;
+
+	//--- LONG WORD 3 ----
+	u32		Rsvd01;
+	u8		Qos_En;			// QoS enable
+	u8		En40MHz;		// 40MHz BW enable
+	u8		AMSDU2AMPDU_En;	//14181 convert AMSDU to AMPDU, 0: disable
+	u8		AMPDU_En;		//111n AMPDU/AMSDU enable
+
+	//--- LONG WORD 4 ----
+	u8		rate_control_offload;//FW offloads, 0: driver handles
+	u8		aggregation_offload;	// FW offloads, 0: driver handles
+	u8		beacon_offload;	//FW offloads, 0: driver handles
+	u8		MLME_offload;	// FW offloads, 0: driver handles
+	u8		hwpc_offload;	// FW offloads, 0: driver handles
+	u8		tcp_checksum_offload;	//FW offloads, 0: driver handles
+	u8		tcp_offload;			//FW offloads, 0: driver handles
+	u8		ps_control_offload;	//FW offloads, 0: driver handles
+
+	//--- LONG WORD 5 ----
+	u8		WWLAN_Offload;	// FW offloads, 0: driver handles
+	u8		MPMode;	// normal mode, 0: MP mode;
+	u16		Version;		//0x8000 ~ 0x8FFF for FPGA version, 0x0000 ~ 0x7FFF for ASIC version,
+	u16		Signature;	//0x12: 8712, 0x92: 8192S
+	u16		Rsvd11;
+
+//	u32		rsvd1;
+//	u32		wireless_band;	//no A-band exists in 8712
+}RT_8192S_FIRMWARE_PRIV, *PRT_8192S_FIRMWARE_PRIV;
+
+typedef struct _RT_8192S_FIRMWARE_HDR {//8-byte alinment required
+
+	//--- LONG WORD 0 ----
+	u16		Signature;
+	u16		Version;		  //0x8000 ~ 0x8FFF for FPGA version, 0x0000 ~ 0x7FFF for ASIC version,
+	u32		DMEMSize;    //define the size of boot loader
+
+
+	//--- LONG WORD 1 ----
+	u32		IMG_IMEM_SIZE;    //define the size of FW in IMEM
+	u32		IMG_SRAM_SIZE;    //define the size of FW in SRAM
+
+	//--- LONG WORD 2 ----
+	u32		FW_PRIV_SIZE;       //define the size of DMEM variable
+	u32		Rsvd0;
+
+	//--- LONG WORD 3 ----
+	u32		Rsvd1;
+	u32		Rsvd2;
+
+	RT_8192S_FIRMWARE_PRIV	FWPriv;
+
+}RT_8192S_FIRMWARE_HDR, *PRT_8192S_FIRMWARE_HDR;
+
+#define	RT_8192S_FIRMWARE_HDR_SIZE	80
+
+typedef enum _FIRMWARE_8192S_STATUS{
+	FW_STATUS_INIT = 0,
+	FW_STATUS_LOAD_IMEM = 1,
+	FW_STATUS_LOAD_EMEM = 2,
+	FW_STATUS_LOAD_DMEM = 3,
+	FW_STATUS_READY = 4,
+}FIRMWARE_8192S_STATUS;
+
+#define RTL8190_MAX_FIRMWARE_CODE_SIZE  64000   //64k
+
+typedef struct _rt_firmware{
+	firmware_source_e	eFWSource;
+	PRT_8192S_FIRMWARE_HDR		pFwHeader;
+	FIRMWARE_8192S_STATUS	FWStatus;
+	u8		FwIMEM[64000];
+	u8		FwEMEM[64000];
+	u32		FwIMEMLen;
+	u32		FwEMEMLen;
+	u8		szFwTmpBuffer[164000];
+	u16		CmdPacketFragThresold;
+	//firmware_status_e       firmware_status;//in 92u temp FIXLZM
+	//u16               cmdpacket_frag_thresold;//in 92u temp FIXLZM
+	//u8                firmware_buf[RTL8190_MAX_FIRMWARE_CODE_SIZE];//in 92u temp FIXLZM
+	//u16               firmware_buf_size;//in 92u temp FIXLZM
+
+}rt_firmware, *prt_firmware;
+#else
+typedef struct _rt_firmware{
+	firmware_status_e firmware_status;
+	u16               cmdpacket_frag_thresold;
+#define RTL8190_MAX_FIRMWARE_CODE_SIZE  64000   //64k
+#define MAX_FW_INIT_STEP                3
+	u8                firmware_buf[MAX_FW_INIT_STEP][RTL8190_MAX_FIRMWARE_CODE_SIZE];
+	u16               firmware_buf_size[MAX_FW_INIT_STEP];
+}rt_firmware, *prt_firmware;
+#endif
+typedef struct _rt_firmware_info_819xUsb{
+	u8		sz_info[16];
+}rt_firmware_info_819xUsb, *prt_firmware_info_819xUsb;
+#endif
+
+//+by amy 080507
+#define MAX_RECEIVE_BUFFER_SIZE	9100	// Add this to 9100 bytes to receive A-MSDU from RT-AP
+
+
+/* Firmware Queue Layout */
+#define NUM_OF_FIRMWARE_QUEUE		10
+#define NUM_OF_PAGES_IN_FW		0x100
+
+#ifdef USE_ONE_PIPE
+#define NUM_OF_PAGE_IN_FW_QUEUE_BE	0x000
+#define NUM_OF_PAGE_IN_FW_QUEUE_BK	0x000
+#define NUM_OF_PAGE_IN_FW_QUEUE_VI	0x0ff
+#define NUM_OF_PAGE_IN_FW_QUEUE_VO	0x000
+#define NUM_OF_PAGE_IN_FW_QUEUE_HCCA	0
+#define NUM_OF_PAGE_IN_FW_QUEUE_CMD	0x0
+#define NUM_OF_PAGE_IN_FW_QUEUE_MGNT	0x00
+#define NUM_OF_PAGE_IN_FW_QUEUE_HIGH	0
+#define NUM_OF_PAGE_IN_FW_QUEUE_BCN	0x0
+#define NUM_OF_PAGE_IN_FW_QUEUE_PUB	0x00
+#else
+
+#define NUM_OF_PAGE_IN_FW_QUEUE_BE	0x020
+#define NUM_OF_PAGE_IN_FW_QUEUE_BK	0x020
+#define NUM_OF_PAGE_IN_FW_QUEUE_VI	0x040
+#define NUM_OF_PAGE_IN_FW_QUEUE_VO	0x040
+#define NUM_OF_PAGE_IN_FW_QUEUE_HCCA	0
+#define NUM_OF_PAGE_IN_FW_QUEUE_CMD	0x4
+#define NUM_OF_PAGE_IN_FW_QUEUE_MGNT	0x20
+#define NUM_OF_PAGE_IN_FW_QUEUE_HIGH	0
+#define NUM_OF_PAGE_IN_FW_QUEUE_BCN	0x4
+#define NUM_OF_PAGE_IN_FW_QUEUE_PUB	0x18
+
+#endif
+
+#define APPLIED_RESERVED_QUEUE_IN_FW	0x80000000
+#define RSVD_FW_QUEUE_PAGE_BK_SHIFT	0x00
+#define RSVD_FW_QUEUE_PAGE_BE_SHIFT	0x08
+#define RSVD_FW_QUEUE_PAGE_VI_SHIFT	0x10
+#define RSVD_FW_QUEUE_PAGE_VO_SHIFT	0x18
+#define RSVD_FW_QUEUE_PAGE_MGNT_SHIFT	0x10
+#define RSVD_FW_QUEUE_PAGE_CMD_SHIFT	0x08
+#define RSVD_FW_QUEUE_PAGE_BCN_SHIFT	0x00
+#define RSVD_FW_QUEUE_PAGE_PUB_SHIFT	0x08
+//=================================================================
+//=================================================================
+
+#define EPROM_93c46 0
+#define EPROM_93c56 1
+
+#define DEFAULT_FRAG_THRESHOLD 2342U
+#define MIN_FRAG_THRESHOLD     256U
+#define DEFAULT_BEACONINTERVAL 0x64U
+#define DEFAULT_BEACON_ESSID "Rtl819xU"
+
+#define DEFAULT_SSID ""
+#define DEFAULT_RETRY_RTS 7
+#define DEFAULT_RETRY_DATA 7
+#define PRISM_HDR_SIZE 64
+
+#define		PHY_RSSI_SLID_WIN_MAX				100
+
+
+typedef enum _WIRELESS_MODE {
+	WIRELESS_MODE_UNKNOWN = 0x00,
+	WIRELESS_MODE_A = 0x01,
+	WIRELESS_MODE_B = 0x02,
+	WIRELESS_MODE_G = 0x04,
+	WIRELESS_MODE_AUTO = 0x08,
+	WIRELESS_MODE_N_24G = 0x10,
+	WIRELESS_MODE_N_5G = 0x20
+} WIRELESS_MODE;
+
+
+#define RTL_IOCTL_WPA_SUPPLICANT		SIOCIWFIRSTPRIV+30
+
+typedef struct buffer
+{
+	struct buffer *next;
+	u32 *buf;
+
+} buffer;
+
+typedef struct rtl_reg_debug{
+        unsigned int  cmd;
+        struct {
+                unsigned char type;
+                unsigned char addr;
+                unsigned char page;
+                unsigned char length;
+        } head;
+        unsigned char buf[0xff];
+}rtl_reg_debug;
+
+
+
+
+
+#if 0
+
+typedef struct tx_pendingbuf
+{
+	struct ieee80211_txb *txb;
+	short ispending;
+	short descfrag;
+} tx_pendigbuf;
+
+#endif
+
+typedef struct _rt_9x_tx_rate_history {
+	u32             cck[4];
+	u32             ofdm[8];
+	// HT_MCS[0][]: BW=0 SG=0
+	// HT_MCS[1][]: BW=1 SG=0
+	// HT_MCS[2][]: BW=0 SG=1
+	// HT_MCS[3][]: BW=1 SG=1
+	u32             ht_mcs[4][16];
+}rt_tx_rahis_t, *prt_tx_rahis_t;
+typedef struct _RT_SMOOTH_DATA_4RF {
+	char    elements[4][100];//array to store values
+	u32     index;                  //index to current array to store
+	u32     TotalNum;               //num of valid elements
+	u32     TotalVal[4];            //sum of valid elements
+}RT_SMOOTH_DATA_4RF, *PRT_SMOOTH_DATA_4RF;
+
+#define MAX_8192U_RX_SIZE			8192    // This maybe changed for D-cut larger aggregation size
+//stats seems messed up, clean it ASAP
+typedef struct Stats
+{
+	unsigned long txrdu;
+//	unsigned long rxrdu;
+	//unsigned long rxnolast;
+	//unsigned long rxnodata;
+//	unsigned long rxreset;
+//	unsigned long rxnopointer;
+	unsigned long rxok;
+	unsigned long rxframgment;
+	unsigned long rxcmdpkt[4];		//08/05/08 amy rx cmd element txfeedback/bcn report/cfg set/query
+	unsigned long rxurberr;
+	unsigned long rxstaterr;
+	unsigned long received_rate_histogram[4][32];	//0: Total, 1:OK, 2:CRC, 3:ICV, 2007 07 03 cosa
+	unsigned long received_preamble_GI[2][32];		//0: Long preamble/GI, 1:Short preamble/GI
+	unsigned long rx_AMPDUsize_histogram[5]; // level: (<4K), (4K~8K), (8K~16K), (16K~32K), (32K~64K)
+	unsigned long rx_AMPDUnum_histogram[5]; // level: (<5), (5~10), (10~20), (20~40), (>40)
+	unsigned long numpacket_matchbssid;	// debug use only.
+	unsigned long numpacket_toself;		// debug use only.
+	unsigned long num_process_phyinfo;		// debug use only.
+	unsigned long numqry_phystatus;
+	unsigned long numqry_phystatusCCK;
+	unsigned long numqry_phystatusHT;
+	unsigned long received_bwtype[5];              //0: 20M, 1: funn40M, 2: upper20M, 3: lower20M, 4: duplicate
+	unsigned long txnperr;
+	unsigned long txnpdrop;
+	unsigned long txresumed;
+//	unsigned long rxerr;
+//	unsigned long rxoverflow;
+//	unsigned long rxint;
+	unsigned long txnpokint;
+//	unsigned long txhpokint;
+//	unsigned long txhperr;
+//	unsigned long ints;
+//	unsigned long shints;
+	unsigned long txoverflow;
+//	unsigned long rxdmafail;
+//	unsigned long txbeacon;
+//	unsigned long txbeaconerr;
+	unsigned long txlpokint;
+	unsigned long txlpdrop;
+	unsigned long txlperr;
+	unsigned long txbeokint;
+	unsigned long txbedrop;
+	unsigned long txbeerr;
+	unsigned long txbkokint;
+	unsigned long txbkdrop;
+	unsigned long txbkerr;
+	unsigned long txviokint;
+	unsigned long txvidrop;
+	unsigned long txvierr;
+	unsigned long txvookint;
+	unsigned long txvodrop;
+	unsigned long txvoerr;
+	unsigned long txbeaconokint;
+	unsigned long txbeacondrop;
+	unsigned long txbeaconerr;
+	unsigned long txmanageokint;
+	unsigned long txmanagedrop;
+	unsigned long txmanageerr;
+	unsigned long txdatapkt;
+	unsigned long txfeedback;
+	unsigned long txfeedbackok;
+
+	unsigned long txoktotal;
+	unsigned long txokbytestotal;
+	unsigned long txokinperiod;
+	unsigned long txmulticast;
+	unsigned long txbytesmulticast;
+	unsigned long txbroadcast;
+	unsigned long txbytesbroadcast;
+	unsigned long txunicast;
+	unsigned long txbytesunicast;
+
+	unsigned long rxoktotal;
+	unsigned long rxbytesunicast;
+	unsigned long txfeedbackfail;
+	unsigned long txerrtotal;
+	unsigned long txerrbytestotal;
+	unsigned long txerrmulticast;
+	unsigned long txerrbroadcast;
+	unsigned long txerrunicast;
+	unsigned long txretrycount;
+	unsigned long txfeedbackretry;
+	u8	      last_packet_rate;
+	unsigned long slide_signal_strength[100];
+	unsigned long slide_evm[100];
+	unsigned long slide_rssi_total;	// For recording sliding window's RSSI value
+	unsigned long slide_evm_total;	// For recording sliding window's EVM value
+	long signal_strength; // Transformed, in dbm. Beautified signal strength for UI, not correct.
+	long signal_quality;
+	long last_signal_strength_inpercent;
+	long recv_signal_power;	// Correct smoothed ss in Dbm, only used in driver to report real power now.
+	u8 rx_rssi_percentage[4];
+	u8 rx_evm_percentage[2];
+	long rxSNRdB[4];
+	rt_tx_rahis_t txrate;
+	u32 Slide_Beacon_pwdb[100];     //cosa add for beacon rssi
+	u32 Slide_Beacon_Total;         //cosa add for beacon rssi
+	RT_SMOOTH_DATA_4RF              cck_adc_pwdb;
+
+	u32	CurrentShowTxate;
+} Stats;
+
+
+// Bandwidth Offset
+#define HAL_PRIME_CHNL_OFFSET_DONT_CARE		0
+#define HAL_PRIME_CHNL_OFFSET_LOWER			1
+#define HAL_PRIME_CHNL_OFFSET_UPPER			2
+
+//+by amy 080507
+
+typedef struct 	ChnlAccessSetting {
+	u16 SIFS_Timer;
+	u16 DIFS_Timer;
+	u16 SlotTimeTimer;
+	u16 EIFS_Timer;
+	u16 CWminIndex;
+	u16 CWmaxIndex;
+}*PCHANNEL_ACCESS_SETTING,CHANNEL_ACCESS_SETTING;
+
+typedef struct _BB_REGISTER_DEFINITION{
+	u32 rfintfs; 			// set software control: //		0x870~0x877[8 bytes]
+	u32 rfintfi; 			// readback data: //		0x8e0~0x8e7[8 bytes]
+	u32 rfintfo; 			// output data: //		0x860~0x86f [16 bytes]
+	u32 rfintfe; 			// output enable: //		0x860~0x86f [16 bytes]
+	u32 rf3wireOffset; 		// LSSI data: //		0x840~0x84f [16 bytes]
+	u32 rfLSSI_Select; 		// BB Band Select: //		0x878~0x87f [8 bytes]
+	u32 rfTxGainStage;		// Tx gain stage: //		0x80c~0x80f [4 bytes]
+	u32 rfHSSIPara1; 		// wire parameter control1 : //		0x820~0x823,0x828~0x82b, 0x830~0x833, 0x838~0x83b [16 bytes]
+	u32 rfHSSIPara2; 		// wire parameter control2 : //		0x824~0x827,0x82c~0x82f, 0x834~0x837, 0x83c~0x83f [16 bytes]
+	u32 rfSwitchControl; 	//Tx Rx antenna control : //		0x858~0x85f [16 bytes]
+	u32 rfAGCControl1; 	//AGC parameter control1 : //		0xc50~0xc53,0xc58~0xc5b, 0xc60~0xc63, 0xc68~0xc6b [16 bytes]
+	u32 rfAGCControl2; 	//AGC parameter control2 : //		0xc54~0xc57,0xc5c~0xc5f, 0xc64~0xc67, 0xc6c~0xc6f [16 bytes]
+	u32 rfRxIQImbalance; 	//OFDM Rx IQ imbalance matrix : //		0xc14~0xc17,0xc1c~0xc1f, 0xc24~0xc27, 0xc2c~0xc2f [16 bytes]
+	u32 rfRxAFE;  			//Rx IQ DC ofset and Rx digital filter, Rx DC notch filter : //		0xc10~0xc13,0xc18~0xc1b, 0xc20~0xc23, 0xc28~0xc2b [16 bytes]
+	u32 rfTxIQImbalance; 	//OFDM Tx IQ imbalance matrix //		0xc80~0xc83,0xc88~0xc8b, 0xc90~0xc93, 0xc98~0xc9b [16 bytes]
+	u32 rfTxAFE; 			//Tx IQ DC Offset and Tx DFIR type //		0xc84~0xc87,0xc8c~0xc8f, 0xc94~0xc97, 0xc9c~0xc9f [16 bytes]
+	u32 rfLSSIReadBack; 	//LSSI RF readback data //		0x8a0~0x8af [16 bytes]
+	u32 rfLSSIReadBackPi; 	//LSSI RF readback data PI mode 0x8b8-8bc for Path A and B
+}BB_REGISTER_DEFINITION_T, *PBB_REGISTER_DEFINITION_T;
+
+typedef enum _RT_RF_TYPE_819xU{
+        RF_TYPE_MIN = 0,
+        RF_8225,
+        RF_8256,
+        RF_8258,
+	RF_6052=4,		// 4 11b/g/n RF
+        RF_PSEUDO_11N = 5,
+}RT_RF_TYPE_819xU, *PRT_RF_TYPE_819xU;
+
+//#ifdef RTL8192SU
+typedef enum _RF_POWER_STATE{
+	RF_ON,
+	RF_SLEEP,
+	RF_OFF,
+	RF_SHUT_DOWN,
+}RF_POWER_STATE, *PRF_POWER_STATE;
+//#endif
+
+typedef struct _rate_adaptive
+{
+	u8				rate_adaptive_disabled;
+	u8				ratr_state;
+	u16				reserve;
+
+	u32				high_rssi_thresh_for_ra;
+	u32				high2low_rssi_thresh_for_ra;
+	u8				low2high_rssi_thresh_for_ra40M;
+	u32				low_rssi_thresh_for_ra40M;
+	u8				low2high_rssi_thresh_for_ra20M;
+	u32				low_rssi_thresh_for_ra20M;
+	u32				upper_rssi_threshold_ratr;
+	u32				middle_rssi_threshold_ratr;
+	u32				low_rssi_threshold_ratr;
+	u32				low_rssi_threshold_ratr_40M;
+	u32				low_rssi_threshold_ratr_20M;
+	u8				ping_rssi_enable;	//cosa add for test
+	u32				ping_rssi_ratr;	//cosa add for test
+	u32				ping_rssi_thresh_for_ra;//cosa add for test
+	u32				last_ratr;
+
+} rate_adaptive, *prate_adaptive;
+
+#define TxBBGainTableLength 37
+#define	CCKTxBBGainTableLength 23
+
+typedef struct _txbbgain_struct
+{
+	long	txbb_iq_amplifygain;
+	u32	txbbgain_value;
+} txbbgain_struct, *ptxbbgain_struct;
+
+typedef struct _ccktxbbgain_struct
+{
+	//The Value is from a22 to a29 one Byte one time is much Safer
+	u8	ccktxbb_valuearray[8];
+} ccktxbbgain_struct,*pccktxbbgain_struct;
+
+
+typedef struct _init_gain
+{
+	u8				xaagccore1;
+	u8				xbagccore1;
+	u8				xcagccore1;
+	u8				xdagccore1;
+	u8				cca;
+
+} init_gain, *pinit_gain;
+//by amy 0606
+
+typedef struct _phy_ofdm_rx_status_report_819xusb
+{
+	u8	trsw_gain_X[4];
+	u8	pwdb_all;
+	u8	cfosho_X[4];
+	u8	cfotail_X[4];
+	u8	rxevm_X[2];
+	u8	rxsnr_X[4];
+	u8	pdsnr_X[2];
+	u8	csi_current_X[2];
+	u8	csi_target_X[2];
+	u8	sigevm;
+	u8	max_ex_pwr;
+	u8	sgi_en;
+	u8  rxsc_sgien_exflg;
+}phy_sts_ofdm_819xusb_t;
+
+typedef struct _phy_cck_rx_status_report_819xusb
+{
+	/* For CCK rate descriptor. This is a unsigned 8:1 variable. LSB bit presend
+	   0.5. And MSB 7 bts presend a signed value. Range from -64~+63.5. */
+	u8	adc_pwdb_X[4];
+	u8	sq_rpt;
+	u8	cck_agc_rpt;
+}phy_sts_cck_819xusb_t;
+
+
+typedef struct _phy_ofdm_rx_status_rxsc_sgien_exintfflag{
+	u8			reserved:4;
+	u8			rxsc:2;
+	u8			sgi_en:1;
+	u8			ex_intf_flag:1;
+}phy_ofdm_rx_status_rxsc_sgien_exintfflag;
+
+typedef enum _RT_CUSTOMER_ID
+{
+	RT_CID_DEFAULT = 0,
+	RT_CID_8187_ALPHA0 = 1,
+	RT_CID_8187_SERCOMM_PS = 2,
+	RT_CID_8187_HW_LED = 3,
+	RT_CID_8187_NETGEAR = 4,
+	RT_CID_WHQL = 5,
+	RT_CID_819x_CAMEO  = 6,
+	RT_CID_819x_RUNTOP = 7,
+	RT_CID_819x_Senao = 8,
+	RT_CID_TOSHIBA = 9,	// Merge by Jacken, 2008/01/31.
+	RT_CID_819x_Netcore = 10,
+	RT_CID_Nettronix = 11,
+	RT_CID_DLINK = 12,
+	RT_CID_PRONET = 13,
+}RT_CUSTOMER_ID, *PRT_CUSTOMER_ID;
+
+//================================================================================
+// LED customization.
+//================================================================================
+
+typedef	enum _LED_STRATEGY_8190{
+	SW_LED_MODE0, // SW control 1 LED via GPIO0. It is default option.
+	SW_LED_MODE1, // SW control for PCI Express
+	SW_LED_MODE2, // SW control for Cameo.
+	SW_LED_MODE3, // SW contorl for RunTop.
+	SW_LED_MODE4, // SW control for Netcore
+	HW_LED, // HW control 2 LEDs, LED0 and LED1 (there are 4 different control modes)
+}LED_STRATEGY_8190, *PLED_STRATEGY_8190;
+
+typedef enum _RESET_TYPE {
+	RESET_TYPE_NORESET = 0x00,
+	RESET_TYPE_NORMAL = 0x01,
+	RESET_TYPE_SILENT = 0x02
+} RESET_TYPE;
+
+/* The simple tx command OP code. */
+typedef enum _tag_TxCmd_Config_Index{
+	TXCMD_TXRA_HISTORY_CTRL				= 0xFF900000,
+	TXCMD_RESET_TX_PKT_BUFF				= 0xFF900001,
+	TXCMD_RESET_RX_PKT_BUFF				= 0xFF900002,
+	TXCMD_SET_TX_DURATION				= 0xFF900003,
+	TXCMD_SET_RX_RSSI						= 0xFF900004,
+	TXCMD_SET_TX_PWR_TRACKING			= 0xFF900005,
+	TXCMD_XXXX_CTRL,
+}DCMD_TXCMD_OP;
+
+typedef enum{
+	NIC_8192U = 1,
+	NIC_8190P = 2,
+	NIC_8192E = 3,
+	NIC_8192SE = 4,
+	NIC_8192SU = 5,
+	} nic_t;
+
+//definded by WB. Ready to fill handlers for different NIC types.
+//add handle here when necessary.
+struct rtl819x_ops{
+	nic_t nic_type;
+	void (* rtl819x_read_eeprom_info)(struct net_device *dev);
+	short (* rtl819x_tx)(struct net_device *dev, struct sk_buff* skb);
+	short (* rtl819x_tx_cmd)(struct net_device *dev, struct sk_buff *skb);
+	void (* rtl819x_rx_nomal)(struct sk_buff* skb);
+	void (* rtl819x_rx_cmd)(struct sk_buff *skb);
+	bool (*	rtl819x_adapter_start)(struct net_device *dev);
+	void (* rtl819x_link_change)(struct net_device *dev);
+	void (*	rtl819x_initial_gain)(struct net_device *dev,u8 Operation);
+	void (*	rtl819x_query_rxdesc_status)(struct sk_buff *skb, struct ieee80211_rx_stats *stats, bool bIsRxAggrSubframe);
+};
+
+typedef struct r8192_priv
+{
+	struct rtl819x_ops* ops;
+	struct usb_device *udev;
+	//added for maintain info from eeprom
+	short epromtype;
+	u16 eeprom_vid;
+	u16 eeprom_pid;
+	u8  eeprom_CustomerID;
+	u8  eeprom_SubCustomerID;
+	u8  eeprom_ChannelPlan;
+	RT_CUSTOMER_ID CustomerID;
+	LED_STRATEGY_8190	LedStrategy;
+	u8  txqueue_to_outpipemap[9];
+	u8  RtOutPipes[16];
+	u8  RtInPipes[16];
+	u8  ep_in_num;
+	u8  ep_out_num;
+	u8  ep_num;
+	int irq;
+	struct ieee80211_device *ieee80211;
+
+	short card_8192; /* O: rtl8192, 1:rtl8185 V B/C, 2:rtl8185 V D */
+	u8 card_8192_version; /* if TCR reports card V B/C this discriminates */
+//	short phy_ver; /* meaningful for rtl8225 1:A 2:B 3:C */
+	short enable_gpio0;
+	enum card_type {PCI,MINIPCI,CARDBUS,USB}card_type;
+	short hw_plcp_len;
+	short plcp_preamble_mode;
+
+	spinlock_t irq_lock;
+//	spinlock_t irq_th_lock;
+	spinlock_t tx_lock;
+	spinlock_t ps_lock;
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,16))
+	struct semaphore mutex;
+#else
+        struct mutex mutex;
+#endif
+	spinlock_t rf_lock; //used to lock rf write operation added by wb
+
+	u16 irq_mask;
+//	short irq_enabled;
+//	struct net_device *dev; //comment this out.
+	short chan;
+	short sens;
+	short max_sens;
+
+
+	//	u8 chtxpwr[15]; //channels from 1 to 14, 0 not used
+//	u8 chtxpwr_ofdm[15]; //channels from 1 to 14, 0 not used
+//	u8 cck_txpwr_base;
+//	u8 ofdm_txpwr_base;
+//	u8 challow[15]; //channels from 1 to 14, 0 not used
+	short up;
+	short crcmon; //if 1 allow bad crc frame reception in monitor mode
+//	short prism_hdr;
+
+//	struct timer_list scan_timer;
+	/*short scanpending;
+	short stopscan;*/
+//	spinlock_t scan_lock;
+//	u8 active_probe;
+	//u8 active_scan_num;
+	struct semaphore wx_sem;
+	struct semaphore rf_sem; //used to lock rf write operation added by wb, modified by david
+//	short hw_wep;
+
+//	short digphy;
+//	short antb;
+//	short diversity;
+//	u8 cs_treshold;
+//	short rcr_csense;
+	u8 rf_type; //0 means 1T2R, 1 means 2T4R
+	RT_RF_TYPE_819xU rf_chip;
+
+//	u32 key0[4];
+	short (*rf_set_sens)(struct net_device *dev,short sens);
+	u8 (*rf_set_chan)(struct net_device *dev,u8 ch);
+	void (*rf_close)(struct net_device *dev);
+	void (*rf_init)(struct net_device *dev);
+	//short rate;
+	short promisc;
+	/*stats*/
+	struct Stats stats;
+	struct iw_statistics wstats;
+	struct proc_dir_entry *dir_dev;
+
+	/*RX stuff*/
+//	u32 *rxring;
+//	u32 *rxringtail;
+//	dma_addr_t rxringdma;
+	struct urb **rx_urb;
+	struct urb **rx_cmd_urb;
+
+/* modified by davad for Rx process */
+       struct sk_buff_head rx_queue;
+       struct sk_buff_head skb_queue;
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
+	struct tq_struct qos_activate;
+#else
+       struct work_struct qos_activate;
+#endif
+	short  tx_urb_index;
+	atomic_t tx_pending[0x10];//UART_PRIORITY+1
+
+
+	struct tasklet_struct irq_rx_tasklet;
+	struct urb *rxurb_task;
+
+	//2 Tx Related variables
+	u16	ShortRetryLimit;
+	u16	LongRetryLimit;
+	u32	TransmitConfig;
+	u8	RegCWinMin;		// For turbo mode CW adaptive. Added by Annie, 2005-10-27.
+
+	u32     LastRxDescTSFHigh;
+	u32     LastRxDescTSFLow;
+
+
+	//2 Rx Related variables
+	u16	EarlyRxThreshold;
+	u32	ReceiveConfig;
+	u8	AcmControl;
+
+	u8	RFProgType;
+
+	u8 retry_data;
+	u8 retry_rts;
+	u16 rts;
+
+	struct 	ChnlAccessSetting  ChannelAccessSetting;
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	struct work_struct reset_wq;
+#else
+	struct tq_struct reset_wq;
+#endif
+
+/**********************************************************/
+	//for rtl819xUsb
+	u16     basic_rate;
+	u8      short_preamble;
+	u8      slot_time;
+	bool 	bDcut;
+	bool bCurrentRxAggrEnable;
+	u8 Rf_Mode; //add for Firmware RF -R/W switch
+	prt_firmware		pFirmware;
+	rtl819xUsb_loopback_e	LoopbackMode;
+	firmware_source_e	firmware_source;
+	bool usb_error;
+
+	u16 EEPROMTxPowerDiff;
+	u8 EEPROMThermalMeter;
+	u8 EEPROMPwDiff;
+	u8 EEPROMCrystalCap;
+	u8 EEPROM_Def_Ver;
+	u8 EEPROMTxPowerLevelCCK;// CCK channel 1~14
+	u8 EEPROMTxPowerLevelCCK_V1[3];
+	u8 EEPROMTxPowerLevelOFDM24G[3]; // OFDM 2.4G channel 1~14
+	u8 EEPROMTxPowerLevelOFDM5G[24];	// OFDM 5G
+
+//RTL8192SU
+	bool	bDmDisableProtect;
+	bool	bIgnoreDiffRateTxPowerOffset;
+
+#ifdef EEPROM_OLD_FORMAT_SUPPORT
+	u8  EEPROMTxPowerLevelCCK24G[14];		// CCK 2.4G channel 1~14
+	//u8  EEPROMTxPowerLevelOFDM24G[14];	// OFDM 2.4G channel 1~14
+	//u8  EEPROMTxPowerLevelOFDM5G[24];	// OFDM 5G
+#else
+	// For EEPROM TX Power Index like 8190 series
+	u8  EEPROMRfACCKChnl1TxPwLevel[3];	//RF-A CCK Tx Power Level at channel 7
+	u8  EEPROMRfAOfdmChnlTxPwLevel[3];//RF-A CCK Tx Power Level at [0],[1],[2] = channel 1,7,13
+	u8  EEPROMRfCCCKChnl1TxPwLevel[3];	//RF-C CCK Tx Power Level at channel 7
+	u8  EEPROMRfCOfdmChnlTxPwLevel[3];//RF-C CCK Tx Power Level at [0],[1],[2] = channel 1,7,13
+
+	// F92S new definition
+	//RF-A&B CCK/OFDM Tx Power Level at three channel are [1-3] [4-9] [10-14]
+	u8  RfCckChnlAreaTxPwr[2][3];
+	u8  RfOfdmChnlAreaTxPwr1T[2][3];
+	u8  RfOfdmChnlAreaTxPwr2T[2][3];
+#endif
+
+	// Add For EEPROM Efuse switch and  Efuse Shadow map Setting
+	bool		EepromOrEfuse;
+	bool		bBootFromEfuse;	// system boot form EFUSE
+	u8  		EfuseMap[2][HWSET_MAX_SIZE_92S];
+
+	u8  		EEPROMUsbOption;
+	u8  		EEPROMUsbPhyParam[5];
+	u8  		EEPROMTxPwrBase;
+	u8  		EEPROMBoardType;
+	bool		bBootFromEEPROM;   // system boot from EEPROM
+	u8  		EEPROMTSSI_A;
+	u8  		EEPROMTSSI_B;
+	u8  		EEPROMHT2T_TxPwr[6];			// For channel 1, 7 and 13 on path A/B.
+	u8  		EEPROMTxPwrTkMode;
+
+	u8  		bTXPowerDataReadFromEEPORM;
+
+	u8		EEPROMVersion;
+	u8		EEPROMUsbEndPointNumber;
+
+	bool		AutoloadFailFlag;
+	u8	RfTxPwrLevelCck[2][14];
+	u8	RfTxPwrLevelOfdm1T[2][14];
+	u8	RfTxPwrLevelOfdm2T[2][14];
+	// 2009/01/20 MH Add for new EEPROM format.
+	u8					TxPwrHt20Diff[2][14];				// HT 20<->40 Pwr diff
+	u8					TxPwrLegacyHtDiff[2][14];		// For HT<->legacy pwr diff
+	u8					TxPwrbandEdgeHt40[2][2];		// Band edge for HY 40MHZlow/up channel
+	u8					TxPwrbandEdgeHt20[2][2];		// Band edge for HY 40MHZ low/up channel
+	u8					TxPwrbandEdgeLegacyOfdm[2][2];	// Band edge for legacy ofdm low/up channel
+	u8					TxPwrbandEdgeFlag;				// Band edge enable flag
+
+	// L1 and L2 high power threshold.
+	u8 				MidHighPwrTHR_L1;
+	u8 				MidHighPwrTHR_L2;
+	u8				TxPwrSafetyFlag;				// for Tx power safety spec
+//RTL8192SU
+
+/*PHY related*/
+	BB_REGISTER_DEFINITION_T	PHYRegDef[4];	//Radio A/B/C/D
+	// Read/write are allow for following hardware information variables
+#ifdef RTL8192SU
+	u32	MCSTxPowerLevelOriginalOffset[7];//FIXLZM
+#else
+	u32	MCSTxPowerLevelOriginalOffset[6];
+#endif
+	u32	CCKTxPowerLevelOriginalOffset;
+	u8	TxPowerLevelCCK[14];			// CCK channel 1~14
+	u8	TxPowerLevelOFDM24G[14];		// OFDM 2.4G channel 1~14
+	u8	TxPowerLevelOFDM5G[14];			// OFDM 5G
+	u32	Pwr_Track;
+	u8	TxPowerDiff;
+	u8	AntennaTxPwDiff[2];				// Antenna gain offset, index 0 for B, 1 for C, and 2 for D
+	u8	CrystalCap;						// CrystalCap.
+	u8	ThermalMeter[2];				// ThermalMeter, index 0 for RFIC0, and 1 for RFIC1
+
+	u8	CckPwEnl;
+	// Use to calculate PWBD.
+	u8	bCckHighPower;
+	long	undecorated_smoothed_pwdb;
+
+	//for set channel
+	u8	SwChnlInProgress;
+	u8 	SwChnlStage;
+	u8	SwChnlStep;
+	u8	SetBWModeInProgress;
+	HT_CHANNEL_WIDTH		CurrentChannelBW;
+	u8      ChannelPlan;
+	u8      pwrGroupCnt;
+	// 8190 40MHz mode
+	//
+	u8	nCur40MhzPrimeSC;	// Control channel sub-carrier
+	// Joseph test for shorten RF configuration time.
+	// We save RF reg0 in this variable to reduce RF reading.
+	//
+	u32					RfReg0Value[4];
+	u8 					NumTotalRFPath;
+	bool 				brfpath_rxenable[4];
+	//RF set related
+	bool				SetRFPowerStateInProgress;
+//+by amy 080507
+	struct timer_list watch_dog_timer;
+
+//+by amy 080515 for dynamic mechenism
+	//Add by amy Tx Power Control for Near/Far Range 2008/05/15
+	bool	bdynamic_txpower;  //bDynamicTxPower
+	bool	bDynamicTxHighPower;  // Tx high power state
+	bool	bDynamicTxLowPower;  // Tx low power state
+	bool	bLastDTPFlag_High;
+	bool	bLastDTPFlag_Low;
+
+	bool	bstore_last_dtpflag;
+	bool	bstart_txctrl_bydtp;   //Define to discriminate on High power State or on sitesuvey to change Tx gain index
+	//Add by amy for Rate Adaptive
+	rate_adaptive rate_adaptive;
+	//Add by amy for TX power tracking
+	//2008/05/15  Mars OPEN/CLOSE TX POWER TRACKING
+       txbbgain_struct txbbgain_table[TxBBGainTableLength];
+       u8	EEPROMTxPowerTrackEnable;
+	u8			   txpower_count;//For 6 sec do tracking again
+	bool			   btxpower_trackingInit;
+	u8			   OFDM_index;
+	u8			   CCK_index;
+	//2007/09/10 Mars Add CCK TX Power Tracking
+	ccktxbbgain_struct	cck_txbbgain_table[CCKTxBBGainTableLength];
+	ccktxbbgain_struct	cck_txbbgain_ch14_table[CCKTxBBGainTableLength];
+	u8 rfa_txpowertrackingindex;
+	u8 rfa_txpowertrackingindex_real;
+	u8 rfa_txpowertracking_default;
+	u8 rfc_txpowertrackingindex;
+	u8 rfc_txpowertrackingindex_real;
+
+	s8 cck_present_attentuation;
+	u8 cck_present_attentuation_20Mdefault;
+	u8 cck_present_attentuation_40Mdefault;
+	char cck_present_attentuation_difference;
+	bool btxpower_tracking;
+	bool bcck_in_ch14;
+	bool btxpowerdata_readfromEEPORM;
+	u16 	TSSI_13dBm;
+	//For Backup Initial Gain
+	init_gain initgain_backup;
+	u8 DefaultInitialGain[4];
+	// For EDCA Turbo mode, Added by amy 080515.
+	bool		bis_any_nonbepkts;
+	bool		bcurrent_turbo_EDCA;
+	bool		bis_cur_rdlstate;
+	struct timer_list fsync_timer;
+	bool bfsync_processing;	// 500ms Fsync timer is active or not
+	u32 	rate_record;
+	u32 	rateCountDiffRecord;
+	u32	ContiuneDiffCount;
+	bool bswitch_fsync;
+
+	u8	framesync;
+	u32 	framesyncC34;
+	u8   	framesyncMonitor;
+        	//Added by amy 080516  for RX related
+	u16 	nrxAMPDU_size;
+	u8 	nrxAMPDU_aggr_num;
+
+	//by amy for gpio
+	 bool bHwRadioOff;
+
+	//by amy for reset_count
+	u32 reset_count;
+	bool bpbc_pressed;
+	//by amy for debug
+	u32 txpower_checkcnt;
+	u32 txpower_tracking_callback_cnt;
+	u8 thermal_read_val[40];
+	u8 thermal_readback_index;
+	u32 ccktxpower_adjustcnt_not_ch14;
+	u32 ccktxpower_adjustcnt_ch14;
+	u8 tx_fwinfo_force_subcarriermode;
+	u8 tx_fwinfo_force_subcarrierval;
+	//by amy for silent reset
+	RESET_TYPE	ResetProgress;
+	bool		bForcedSilentReset;
+	bool		bDisableNormalResetCheck;
+	u16		TxCounter;
+	u16		RxCounter;
+	int		IrpPendingCount;
+	bool		bResetInProgress;
+	bool		force_reset;
+	u8		InitialGainOperateType;
+
+	u16		SifsTime;
+
+	//define work item by amy 080526
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+	struct delayed_work update_beacon_wq;
+	struct delayed_work watch_dog_wq;
+	struct delayed_work txpower_tracking_wq;
+	struct delayed_work rfpath_check_wq;
+	struct delayed_work gpio_change_rf_wq;
+	struct delayed_work initialgain_operate_wq;
+#else
+	struct work_struct update_beacon_wq;
+	struct work_struct watch_dog_wq;
+	struct work_struct txpower_tracking_wq;
+	struct work_struct rfpath_check_wq;
+	struct work_struct gpio_change_rf_wq;
+	struct work_struct initialgain_operate_wq;
+#endif
+	struct workqueue_struct *priv_wq;
+#else
+	/* used for periodly scan */
+	struct tq_struct update_beacon_wq;
+	struct tq_struct txpower_tracking_wq;
+	struct tq_struct rfpath_check_wq;
+	struct tq_struct watch_dog_wq;
+	struct tq_struct gpio_change_rf_wq;
+	struct tq_struct initialgain_operate_wq;
+#endif
+//#ifdef RTL8192SU
+	//lzm add for 8192S
+	 u32 			IntrMask;
+	// RF and BB access related synchronization flags.
+	bool				bChangeBBInProgress; // BaseBand RW is still in progress.
+	bool				bChangeRFInProgress; // RF RW is still in progress.
+
+	u32				CCKTxPowerAdjustCntCh14;		//debug only
+	u32				CCKTxPowerAdjustCntNotCh14;	//debug only
+	u32				TXPowerTrackingCallbackCnt;		//debug only
+	u32				TxPowerCheckCnt;				//debug only
+	u32				RFWritePageCnt[3];				//debug only
+	u32				RFReadPageCnt[3];				//debug only
+	u8				ThermalReadBackIndex;			//debug only
+	u8				ThermalReadVal[40];				//debug only
+
+	// For HCT test, 2005.07.15, by rcnjko.
+	// not realize true, just define it, set it 0 default, because some func use it
+	bool				bInHctTest;
+
+	// The current Tx Power Level
+	u8				CurrentCckTxPwrIdx;
+	u8				CurrentOfdm24GTxPwrIdx;
+
+	// For pass 92S common phycfg.c compiler
+	u8					TxPowerLevelCCK_A[14];			// RF-A, CCK channel 1~14
+	u8					TxPowerLevelOFDM24G_A[14];	// RF-A, OFDM 2.4G channel 1~14
+	u8					TxPowerLevelCCK_C[14];			// RF-C, CCK channel 1~14
+	u8					TxPowerLevelOFDM24G_C[14];	// RF-C, OFDM 2.4G channel 1~14
+	u8					LegacyHTTxPowerDiff;			// Legacy to HT rate power diff
+	char					RF_C_TxPwDiff;					// Antenna gain offset, rf-c to rf-a
+
+	bool	bRFSiOrPi;//0=si, 1=pi.
+	//lzm add for 8192S
+
+	bool SetFwCmdInProgress; //is set FW CMD in Progress? 92S only
+	u8 CurrentFwCmdIO;
+
+	u8 MinSpaceCfg;
+
+	u16 rf_pathmap;
+//#endif
+
+
+#ifdef USB_RX_AGGREGATION_SUPPORT
+	bool		bCurrentRxAggrEnable;
+	bool		bForcedUsbRxAggr;
+	u32		ForcedUsbRxAggrInfo;
+	u32		LastUsbRxAggrInfoSetting;
+	u32		RegUsbRxAggrInfo;
+#endif
+
+
+
+}r8192_priv;
+
+// for rtl8187
+// now mirging to rtl8187B
+/*
+typedef enum{
+	LOW_PRIORITY = 0x02,
+	NORM_PRIORITY
+	} priority_t;
+*/
+//for rtl8187B
+typedef enum{
+	BULK_PRIORITY = 0x01,
+	//RSVD0,
+	//RSVD1,
+	LOW_PRIORITY,
+	NORM_PRIORITY,
+	VO_PRIORITY,
+	VI_PRIORITY, //0x05
+	BE_PRIORITY,
+	BK_PRIORITY,
+	RSVD2,
+	RSVD3,
+	BEACON_PRIORITY, //0x0A
+	HIGH_PRIORITY,
+	MANAGE_PRIORITY,
+	RSVD4,
+	RSVD5,
+	UART_PRIORITY //0x0F
+} priority_t;
+
+#if 0
+typedef enum{
+	NIC_8192U = 1,
+	NIC_8190P = 2,
+	NIC_8192E = 3,
+	NIC_8192SE = 4,
+	NIC_8192SU = 5,
+	} nic_t;
+#endif
+
+#if 0 //defined in Qos.h
+//typedef u32 AC_CODING;
+#define AC0_BE	0		// ACI: 0x00	// Best Effort
+#define AC1_BK	1		// ACI: 0x01	// Background
+#define AC2_VI	2		// ACI: 0x10	// Video
+#define AC3_VO	3		// ACI: 0x11	// Voice
+#define AC_MAX	4		// Max: define total number; Should not to be used as a real enum.
+
+//
+// ECWmin/ECWmax field.
+// Ref: WMM spec 2.2.2: WME Parameter Element, p.13.
+//
+typedef	union _ECW{
+	u8	charData;
+	struct
+	{
+		u8	ECWmin:4;
+		u8	ECWmax:4;
+	}f;	// Field
+}ECW, *PECW;
+
+//
+// ACI/AIFSN Field.
+// Ref: WMM spec 2.2.2: WME Parameter Element, p.12.
+//
+typedef	union _ACI_AIFSN{
+	u8	charData;
+
+	struct
+	{
+		u8	AIFSN:4;
+		u8	ACM:1;
+		u8	ACI:2;
+		u8	Reserved:1;
+	}f;	// Field
+}ACI_AIFSN, *PACI_AIFSN;
+
+//
+// AC Parameters Record Format.
+// Ref: WMM spec 2.2.2: WME Parameter Element, p.12.
+//
+typedef	union _AC_PARAM{
+	u32	longData;
+	u8	charData[4];
+
+	struct
+	{
+		ACI_AIFSN	AciAifsn;
+		ECW		Ecw;
+		u16		TXOPLimit;
+	}f;	// Field
+}AC_PARAM, *PAC_PARAM;
+
+#endif
+#ifdef JOHN_HWSEC
+struct ssid_thread {
+	struct net_device *dev;
+       	u8 name[IW_ESSID_MAX_SIZE + 1];
+};
+#endif
+
+#ifdef RTL8192SU
+short rtl8192SU_tx_cmd(struct net_device *dev, struct sk_buff *skb);
+short rtl8192SU_tx(struct net_device *dev, struct sk_buff* skb);
+bool FirmwareDownload92S(struct net_device *dev);
+#else
+short rtl8192_tx(struct net_device *dev, struct sk_buff* skb);
+bool init_firmware(struct net_device *dev);
+#endif
+
+short rtl819xU_tx_cmd(struct net_device *dev, struct sk_buff *skb);
+short rtl8192_tx(struct net_device *dev, struct sk_buff* skb);
+
+u32 read_cam(struct net_device *dev, u8 addr);
+void write_cam(struct net_device *dev, u8 addr, u32 data);
+
+u8 read_nic_byte(struct net_device *dev, int x);
+u8 read_nic_byte_E(struct net_device *dev, int x);
+u32 read_nic_dword(struct net_device *dev, int x);
+u16 read_nic_word(struct net_device *dev, int x) ;
+void write_nic_byte(struct net_device *dev, int x,u8 y);
+void write_nic_byte_E(struct net_device *dev, int x,u8 y);
+void write_nic_word(struct net_device *dev, int x,u16 y);
+void write_nic_dword(struct net_device *dev, int x,u32 y);
+void force_pci_posting(struct net_device *dev);
+
+void rtl8192_rtx_disable(struct net_device *);
+void rtl8192_rx_enable(struct net_device *);
+void rtl8192_tx_enable(struct net_device *);
+
+void rtl8192_disassociate(struct net_device *dev);
+//void fix_rx_fifo(struct net_device *dev);
+void rtl8185_set_rf_pins_enable(struct net_device *dev,u32 a);
+
+void rtl8192_set_anaparam(struct net_device *dev,u32 a);
+void rtl8185_set_anaparam2(struct net_device *dev,u32 a);
+void rtl8192_update_msr(struct net_device *dev);
+int rtl8192_down(struct net_device *dev);
+int rtl8192_up(struct net_device *dev);
+void rtl8192_commit(struct net_device *dev);
+void rtl8192_set_chan(struct net_device *dev,short ch);
+void write_phy(struct net_device *dev, u8 adr, u8 data);
+void write_phy_cck(struct net_device *dev, u8 adr, u32 data);
+void write_phy_ofdm(struct net_device *dev, u8 adr, u32 data);
+void rtl8185_tx_antenna(struct net_device *dev, u8 ant);
+void rtl8192_set_rxconf(struct net_device *dev);
+//short check_nic_enough_desc(struct net_device *dev, priority_t priority);
+extern void rtl819xusb_beacon_tx(struct net_device *dev,u16  tx_rate);
+void CamResetAllEntry(struct net_device* dev);
+void EnableHWSecurityConfig8192(struct net_device *dev);
+void setKey(struct net_device *dev, u8 EntryNo, u8 KeyIndex, u16 KeyType, u8 *MacAddr, u8 DefaultKey, u32 *KeyContent );
+short rtl8192_is_tx_queue_empty(struct net_device *dev);
+
+#endif
diff --git a/drivers/staging/rtl8192su/r8192U_core.c b/drivers/staging/rtl8192su/r8192U_core.c
new file mode 100644
index 00000000000..f1423d71449
--- /dev/null
+++ b/drivers/staging/rtl8192su/r8192U_core.c
@@ -0,0 +1,12460 @@
+/******************************************************************************
+ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
+ * Linux device driver for RTL8192U
+ *
+ * Based on the r8187 driver, which is:
+ * Copyright 2004-2005 Andrea Merello <andreamrl@tiscali.it>, et al.
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * Jerry chuang <wlanfae@realtek.com>
+ */
+
+#ifndef CONFIG_FORCE_HARD_FLOAT
+double __floatsidf (int i) { return i; }
+unsigned int __fixunsdfsi (double d) { return d; }
+double __adddf3(double a, double b) { return a+b; }
+double __addsf3(float a, float b) { return a+b; }
+double __subdf3(double a, double b) { return a-b; }
+double __extendsfdf2(float a) {return a;}
+#endif
+
+#undef LOOP_TEST
+#undef DUMP_RX
+#undef DUMP_TX
+#undef DEBUG_TX_DESC2
+#undef RX_DONT_PASS_UL
+#undef DEBUG_EPROM
+#undef DEBUG_RX_VERBOSE
+#undef DUMMY_RX
+#undef DEBUG_ZERO_RX
+#undef DEBUG_RX_SKB
+#undef DEBUG_TX_FRAG
+#undef DEBUG_RX_FRAG
+#undef DEBUG_TX_FILLDESC
+#undef DEBUG_TX
+#undef DEBUG_IRQ
+#undef DEBUG_RX
+#undef DEBUG_RXALLOC
+#undef DEBUG_REGISTERS
+#undef DEBUG_RING
+#undef DEBUG_IRQ_TASKLET
+#undef DEBUG_TX_ALLOC
+#undef DEBUG_TX_DESC
+
+#define CONFIG_RTL8192_IO_MAP
+
+#ifdef RTL8192SU
+#include <asm/uaccess.h>
+#include "r8192U.h"
+//#include "r8190_rtl8256.h" /* RTL8225 Radio frontend */
+#include "r8180_93cx6.h"   /* Card EEPROM */
+#include "r8192U_wx.h"
+
+#include "r8192S_rtl8225.h"
+#include "r8192S_hw.h"
+#include "r8192S_phy.h"
+#include "r8192S_phyreg.h"
+#include "r8192S_Efuse.h"
+
+#include "r819xU_cmdpkt.h"
+#include "r8192U_dm.h"
+//#include "r8192xU_phyreg.h"
+#include <linux/usb.h>
+// FIXME: check if 2.6.7 is ok
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,7))
+#define usb_kill_urb usb_unlink_urb
+#endif
+
+#ifdef CONFIG_RTL8192_PM
+#include "r8192U_pm.h"
+#endif
+
+#ifdef ENABLE_DOT11D
+#include "dot11d.h"
+#endif
+
+#else
+
+#include <asm/uaccess.h>
+#include "r8192U_hw.h"
+#include "r8192U.h"
+#include "r8190_rtl8256.h" /* RTL8225 Radio frontend */
+#include "r8180_93cx6.h"   /* Card EEPROM */
+#include "r8192U_wx.h"
+#include "r819xU_phy.h" //added by WB 4.30.2008
+#include "r819xU_phyreg.h"
+#include "r819xU_cmdpkt.h"
+#include "r8192U_dm.h"
+//#include "r8192xU_phyreg.h"
+#include <linux/usb.h>
+// FIXME: check if 2.6.7 is ok
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,7))
+#define usb_kill_urb usb_unlink_urb
+#endif
+
+#ifdef CONFIG_RTL8192_PM
+#include "r8192U_pm.h"
+#endif
+
+#ifdef ENABLE_DOT11D
+#include "dot11d.h"
+#endif
+
+#endif
+
+
+#ifdef RTL8192SU
+u32 rt_global_debug_component = \
+//				COMP_TRACE	|
+//    				COMP_DBG	|
+//				COMP_INIT    	|
+//				COMP_RECV	|
+//				COMP_SEND	|
+//				COMP_IO		|
+				COMP_POWER	|
+//				COMP_EPROM   	|
+				COMP_SWBW	|
+				COMP_POWER_TRACKING |
+				COMP_TURBO	|
+				COMP_QOS	|
+//				COMP_RATE	|
+//				COMP_RM		|
+				COMP_DIG	|
+//				COMP_EFUSE	|
+//				COMP_CH		|
+//				COMP_TXAGC	|
+                              	COMP_HIPWR	|
+//                             	COMP_HALDM	|
+				COMP_SEC	|
+				COMP_LED	|
+//				COMP_RF		|
+//				COMP_RXDESC	|
+				COMP_FIRMWARE	|
+				COMP_HT		|
+				COMP_AMSDU	|
+				COMP_SCAN	|
+//				COMP_CMD	|
+				COMP_DOWN	|
+				COMP_RESET	|
+				COMP_ERR; //always open err flags on
+#else
+//set here to open your trace code. //WB
+u32 rt_global_debug_component = \
+			//	COMP_INIT    	|
+//				COMP_DBG	|
+			//	COMP_EPROM   	|
+//				COMP_PHY	|
+			//	COMP_RF		|
+//				COMP_FIRMWARE	|
+//				COMP_CH		|
+			//	COMP_POWER_TRACKING |
+//				COMP_RATE	|
+			//	COMP_TXAGC	|
+		//		COMP_TRACE	|
+				COMP_DOWN	|
+		//		COMP_RECV	|
+                //              COMP_SWBW	|
+				COMP_SEC	|
+	//			COMP_RESET	|
+		//		COMP_SEND	|
+			//	COMP_EVENTS	|
+				COMP_ERR ; //always open err flags on
+#endif
+
+#define TOTAL_CAM_ENTRY 32
+#define CAM_CONTENT_COUNT 8
+
+static struct usb_device_id rtl8192_usb_id_tbl[] = {
+	/* Realtek */
+	{USB_DEVICE(0x0bda, 0x8192)},
+	{USB_DEVICE(0x0bda, 0x8709)},
+	/* Corega */
+	{USB_DEVICE(0x07aa, 0x0043)},
+	/* Belkin */
+	{USB_DEVICE(0x050d, 0x805E)},
+	/* Sitecom */
+	{USB_DEVICE(0x0df6, 0x0031)},
+	/* EnGenius */
+	{USB_DEVICE(0x1740, 0x9201)},
+	/* Dlink */
+	{USB_DEVICE(0x2001, 0x3301)},
+	/* Zinwell */
+	{USB_DEVICE(0x5a57, 0x0290)},
+	//92SU
+	{USB_DEVICE(0x0bda, 0x8172)},
+	{}
+};
+
+MODULE_LICENSE("GPL");
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+MODULE_VERSION("V 1.1");
+#endif
+MODULE_DEVICE_TABLE(usb, rtl8192_usb_id_tbl);
+MODULE_DESCRIPTION("Linux driver for Realtek RTL8192 USB WiFi cards");
+
+static char* ifname = "wlan%d";
+#if 0
+static int hwseqnum = 0;
+static int hwwep = 0;
+#endif
+static int hwwep = 1;  //default use hw. set 0 to use software security
+static int channels = 0x3fff;
+
+
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 9)
+module_param(ifname, charp, S_IRUGO|S_IWUSR );
+//module_param(hwseqnum,int, S_IRUGO|S_IWUSR);
+module_param(hwwep,int, S_IRUGO|S_IWUSR);
+module_param(channels,int, S_IRUGO|S_IWUSR);
+#else
+MODULE_PARM(ifname, "s");
+//MODULE_PARM(hwseqnum,"i");
+MODULE_PARM(hwwep,"i");
+MODULE_PARM(channels,"i");
+#endif
+
+MODULE_PARM_DESC(ifname," Net interface name, wlan%d=default");
+//MODULE_PARM_DESC(hwseqnum," Try to use hardware 802.11 header sequence numbers. Zero=default");
+MODULE_PARM_DESC(hwwep," Try to use hardware security support. ");
+MODULE_PARM_DESC(channels," Channel bitmask for specific locales. NYI");
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+static int __devinit rtl8192_usb_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id);
+static void __devexit rtl8192_usb_disconnect(struct usb_interface *intf);
+#else
+static void *__devinit rtl8192_usb_probe(struct usb_device *udev,unsigned int ifnum,
+			 const struct usb_device_id *id);
+static void __devexit rtl8192_usb_disconnect(struct usb_device *udev, void *ptr);
+#endif
+
+
+static struct usb_driver rtl8192_usb_driver = {
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 15)
+	.owner		= THIS_MODULE,
+#endif
+	.name		= RTL819xU_MODULE_NAME,	          /* Driver name   */
+	.id_table	= rtl8192_usb_id_tbl,	          /* PCI_ID table  */
+	.probe		= rtl8192_usb_probe,	          /* probe fn      */
+	.disconnect	= rtl8192_usb_disconnect,	  /* remove fn     */
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0)
+#ifdef CONFIG_RTL8192_PM
+	.suspend	= rtl8192U_suspend,	          /* PM suspend fn */
+	.resume		= rtl8192U_resume,                 /* PM resume fn  */
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 22)
+	.reset_resume   = rtl8192U_resume,                 /* PM reset resume fn  */
+#endif
+#else
+	.suspend	= NULL,			          /* PM suspend fn */
+	.resume      	= NULL,			          /* PM resume fn  */
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 22)
+	.reset_resume   = NULL,                 /* PM reset resume fn  */
+#endif
+#endif
+#endif
+};
+
+
+#ifdef RTL8192SU
+static void 	rtl8192SU_read_eeprom_info(struct net_device *dev);
+short 	rtl8192SU_tx(struct net_device *dev, struct sk_buff* skb);
+void 	rtl8192SU_rx_nomal(struct sk_buff* skb);
+void 	rtl8192SU_rx_cmd(struct sk_buff *skb);
+bool 	rtl8192SU_adapter_start(struct net_device *dev);
+short	rtl8192SU_tx_cmd(struct net_device *dev, struct sk_buff *skb);
+void 	rtl8192SU_link_change(struct net_device *dev);
+void 	InitialGain8192S(struct net_device *dev,u8 Operation);
+void 	rtl8192SU_query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats, bool bIsRxAggrSubframe);
+
+struct rtl819x_ops rtl8192su_ops = {
+	.nic_type = NIC_8192SU,
+	.rtl819x_read_eeprom_info = rtl8192SU_read_eeprom_info,
+	.rtl819x_tx = rtl8192SU_tx,
+	.rtl819x_tx_cmd = rtl8192SU_tx_cmd,
+	.rtl819x_rx_nomal = rtl8192SU_rx_nomal,
+	.rtl819x_rx_cmd = rtl8192SU_rx_cmd,
+	.rtl819x_adapter_start = rtl8192SU_adapter_start,
+	.rtl819x_link_change = rtl8192SU_link_change,
+	.rtl819x_initial_gain = InitialGain8192S,
+	.rtl819x_query_rxdesc_status = rtl8192SU_query_rxdesc_status,
+};
+#else
+static void 	rtl8192_read_eeprom_info(struct net_device *dev);
+short	rtl8192_tx(struct net_device *dev, struct sk_buff* skb);
+void 	rtl8192_rx_nomal(struct sk_buff* skb);
+void 	rtl8192_rx_cmd(struct sk_buff *skb);
+bool 	rtl8192_adapter_start(struct net_device *dev);
+short	rtl819xU_tx_cmd(struct net_device *dev, struct sk_buff *skb);
+void 	rtl8192_link_change(struct net_device *dev);
+void 	InitialGain819xUsb(struct net_device *dev,u8 Operation);
+void 	query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats, bool bIsRxAggrSubframe);
+
+struct rtl819x_ops rtl8192u_ops = {
+	.nic_type = NIC_8192U,
+	.rtl819x_read_eeprom_info = rtl8192_read_eeprom_info,
+	.rtl819x_tx = rtl8192_tx,
+	.rtl819x_tx_cmd = rtl819xU_tx_cmd,
+	.rtl819x_rx_nomal = rtl8192_rx_nomal,
+	.rtl819x_rx_cmd = rtl8192_rx_cmd,
+	.rtl819x_adapter_start = rtl8192_adapter_start,
+	.rtl819x_link_change = rtl8192_link_change,
+	.rtl819x_initial_gain = InitialGain819xUsb,
+	.rtl819x_query_rxdesc_status = query_rxdesc_status,
+};
+#endif
+
+#ifdef ENABLE_DOT11D
+
+typedef struct _CHANNEL_LIST
+{
+	u8	Channel[32];
+	u8	Len;
+}CHANNEL_LIST, *PCHANNEL_LIST;
+
+static CHANNEL_LIST ChannelPlan[] = {
+	{{1,2,3,4,5,6,7,8,9,10,11,36,40,44,48,52,56,60,64,149,153,157,161,165},24},  		//FCC
+	{{1,2,3,4,5,6,7,8,9,10,11},11},                    				//IC
+	{{1,2,3,4,5,6,7,8,9,10,11,12,13,36,40,44,48,52,56,60,64},21},  	//ETSI
+	{{1,2,3,4,5,6,7,8,9,10,11,12,13},13},    //Spain. Change to ETSI.
+	{{1,2,3,4,5,6,7,8,9,10,11,12,13},13},  	//France. Change to ETSI.
+	{{1,2,3,4,5,6,7,8,9,10,11,12,13,14,36,40,44,48,52,56,60,64},22},	//MKK					//MKK
+	{{1,2,3,4,5,6,7,8,9,10,11,12,13,14,36,40,44,48,52,56,60,64},22},//MKK1
+	{{1,2,3,4,5,6,7,8,9,10,11,12,13},13},	//Israel.
+	{{1,2,3,4,5,6,7,8,9,10,11,12,13,14,36,40,44,48,52,56,60,64},22},			// For 11a , TELEC
+	{{1,2,3,4,5,6,7,8,9,10,11,12,13,14,36,40,44,48,52,56,60,64}, 22},    //MIC
+	{{1,2,3,4,5,6,7,8,9,10,11,12,13,14},14}					//For Global Domain. 1-11:active scan, 12-14 passive scan. //+YJ, 080626
+};
+
+static void rtl819x_set_channel_map(u8 channel_plan, struct r8192_priv* priv)
+{
+	int i, max_chan=-1, min_chan=-1;
+	struct ieee80211_device* ieee = priv->ieee80211;
+	switch (channel_plan)
+	{
+		case COUNTRY_CODE_FCC:
+		case COUNTRY_CODE_IC:
+		case COUNTRY_CODE_ETSI:
+		case COUNTRY_CODE_SPAIN:
+		case COUNTRY_CODE_FRANCE:
+		case COUNTRY_CODE_MKK:
+		case COUNTRY_CODE_MKK1:
+		case COUNTRY_CODE_ISRAEL:
+		case COUNTRY_CODE_TELEC:
+		case COUNTRY_CODE_MIC:
+		{
+			Dot11d_Init(ieee);
+			ieee->bGlobalDomain = false;
+			//acturally 8225 & 8256 rf chip only support B,G,24N mode
+                        if ((priv->rf_chip == RF_8225) || (priv->rf_chip == RF_8256) || (priv->rf_chip == RF_6052))
+			{
+				min_chan = 1;
+				max_chan = 14;
+			}
+			else
+			{
+				RT_TRACE(COMP_ERR, "unknown rf chip, can't set channel map in function:%s()\n", __FUNCTION__);
+			}
+			if (ChannelPlan[channel_plan].Len != 0){
+				// Clear old channel map
+				memset(GET_DOT11D_INFO(ieee)->channel_map, 0, sizeof(GET_DOT11D_INFO(ieee)->channel_map));
+				// Set new channel map
+				for (i=0;i<ChannelPlan[channel_plan].Len;i++)
+				{
+					if (ChannelPlan[channel_plan].Channel[i] < min_chan || ChannelPlan[channel_plan].Channel[i] > max_chan)
+					break;
+					GET_DOT11D_INFO(ieee)->channel_map[ChannelPlan[channel_plan].Channel[i]] = 1;
+				}
+			}
+			break;
+		}
+		case COUNTRY_CODE_GLOBAL_DOMAIN:
+		{
+			GET_DOT11D_INFO(ieee)->bEnabled = 0;//this flag enabled to follow 11d country IE setting, otherwise, it shall follow global domain settings.
+			Dot11d_Reset(ieee);
+			ieee->bGlobalDomain = true;
+			break;
+		}
+		default:
+			break;
+	}
+	return;
+}
+#endif
+
+#define eqMacAddr(a,b) ( ((a)[0]==(b)[0] && (a)[1]==(b)[1] && (a)[2]==(b)[2] && (a)[3]==(b)[3] && (a)[4]==(b)[4] && (a)[5]==(b)[5]) ? 1:0 )
+
+#ifdef RTL8192SU
+#define		rx_hal_is_cck_rate(_pDesc)\
+			((_pDesc->RxMCS  == DESC92S_RATE1M ||\
+			_pDesc->RxMCS == DESC92S_RATE2M ||\
+			_pDesc->RxMCS == DESC92S_RATE5_5M ||\
+			_pDesc->RxMCS == DESC92S_RATE11M) &&\
+			!_pDesc->RxHT)
+
+#define 	tx_hal_is_cck_rate(_DataRate)\
+			( _DataRate == MGN_1M ||\
+			 _DataRate == MGN_2M ||\
+			 _DataRate == MGN_5_5M ||\
+			 _DataRate == MGN_11M )
+
+#else
+#define 	rx_hal_is_cck_rate(_pdrvinfo)\
+			((_pdrvinfo->RxRate == DESC90_RATE1M ||\
+			_pdrvinfo->RxRate == DESC90_RATE2M ||\
+			_pdrvinfo->RxRate == DESC90_RATE5_5M ||\
+			_pdrvinfo->RxRate == DESC90_RATE11M) &&\
+			!_pdrvinfo->RxHT)
+#endif
+
+
+
+void CamResetAllEntry(struct net_device *dev)
+{
+#if 1
+	u32 ulcommand = 0;
+        //2004/02/11  In static WEP, OID_ADD_KEY or OID_ADD_WEP are set before STA associate to AP.
+        // However, ResetKey is called on OID_802_11_INFRASTRUCTURE_MODE and MlmeAssociateRequest
+        // In this condition, Cam can not be reset because upper layer will not set this static key again.
+        //if(Adapter->EncAlgorithm == WEP_Encryption)
+        //      return;
+//debug
+        //DbgPrint("========================================\n");
+        //DbgPrint("                            Call ResetAllEntry                                              \n");
+        //DbgPrint("========================================\n\n");
+	ulcommand |= BIT31|BIT30;
+	write_nic_dword(dev, RWCAM, ulcommand);
+#else
+        for(ucIndex=0;ucIndex<TOTAL_CAM_ENTRY;ucIndex++)
+                CAM_mark_invalid(dev, ucIndex);
+        for(ucIndex=0;ucIndex<TOTAL_CAM_ENTRY;ucIndex++)
+                CAM_empty_entry(dev, ucIndex);
+#endif
+
+}
+
+
+void write_cam(struct net_device *dev, u8 addr, u32 data)
+{
+        write_nic_dword(dev, WCAMI, data);
+        write_nic_dword(dev, RWCAM, BIT31|BIT16|(addr&0xff) );
+}
+
+u32 read_cam(struct net_device *dev, u8 addr)
+{
+        write_nic_dword(dev, RWCAM, 0x80000000|(addr&0xff) );
+        return read_nic_dword(dev, 0xa8);
+}
+
+void write_nic_byte_E(struct net_device *dev, int indx, u8 data)
+{
+	int status;
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	struct usb_device *udev = priv->udev;
+
+	status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			       RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
+			       indx|0xfe00, 0, &data, 1, HZ / 2);
+
+	if (status < 0)
+	{
+		printk("write_nic_byte_E TimeOut! status:%d\n", status);
+	}
+}
+
+u8 read_nic_byte_E(struct net_device *dev, int indx)
+{
+	int status;
+	u8 data;
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	struct usb_device *udev = priv->udev;
+
+	status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+			       RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
+			       indx|0xfe00, 0, &data, 1, HZ / 2);
+
+        if (status < 0)
+        {
+                printk("read_nic_byte_E TimeOut! status:%d\n", status);
+        }
+
+	return data;
+}
+//as 92U has extend page from 4 to 16, so modify functions below.
+void write_nic_byte(struct net_device *dev, int indx, u8 data)
+{
+	int status;
+
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	struct usb_device *udev = priv->udev;
+
+	status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			       RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
+#ifdef RTL8192SU
+			       indx, 0, &data, 1, HZ / 2);
+#else
+			       (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 1, HZ / 2);
+#endif
+
+        if (status < 0)
+        {
+                printk("write_nic_byte TimeOut! status:%d\n", status);
+        }
+
+
+}
+
+
+void write_nic_word(struct net_device *dev, int indx, u16 data)
+{
+
+	int status;
+
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	struct usb_device *udev = priv->udev;
+
+	status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			       RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
+#ifdef RTL8192SU
+			       indx, 0, &data, 2, HZ / 2);
+#else
+			       (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 2, HZ / 2);
+#endif
+
+        if (status < 0)
+        {
+                printk("write_nic_word TimeOut! status:%d\n", status);
+        }
+
+}
+
+
+void write_nic_dword(struct net_device *dev, int indx, u32 data)
+{
+
+	int status;
+
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	struct usb_device *udev = priv->udev;
+
+	status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			       RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
+#ifdef RTL8192SU
+			       indx, 0, &data, 4, HZ / 2);
+#else
+			       (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 4, HZ / 2);
+#endif
+
+
+        if (status < 0)
+        {
+                printk("write_nic_dword TimeOut! status:%d\n", status);
+        }
+
+}
+
+
+
+u8 read_nic_byte(struct net_device *dev, int indx)
+{
+	u8 data;
+	int status;
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	struct usb_device *udev = priv->udev;
+
+	status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+			       RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
+#ifdef RTL8192SU
+			       indx, 0, &data, 1, HZ / 2);
+#else
+			       (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 1, HZ / 2);
+#endif
+
+        if (status < 0)
+        {
+                printk("read_nic_byte TimeOut! status:%d\n", status);
+        }
+
+	return data;
+}
+
+
+
+u16 read_nic_word(struct net_device *dev, int indx)
+{
+	u16 data;
+	int status;
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	struct usb_device *udev = priv->udev;
+
+	status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+			       RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
+#ifdef RTL8192SU
+			       indx, 0, &data, 2, HZ / 2);
+#else
+			       (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 2, HZ / 2);
+#endif
+
+        if (status < 0)
+        {
+                printk("read_nic_word TimeOut! status:%d\n", status);
+        }
+
+
+	return data;
+}
+
+u16 read_nic_word_E(struct net_device *dev, int indx)
+{
+	u16 data;
+	int status;
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	struct usb_device *udev = priv->udev;
+
+	status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+			       RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
+			       indx|0xfe00, 0, &data, 2, HZ / 2);
+
+        if (status < 0)
+        {
+                printk("read_nic_word TimeOut! status:%d\n", status);
+        }
+
+
+	return data;
+}
+
+u32 read_nic_dword(struct net_device *dev, int indx)
+{
+	u32 data;
+	int status;
+//	int result;
+
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	struct usb_device *udev = priv->udev;
+
+	status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+			       RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
+#ifdef RTL8192SU
+			       indx, 0, &data, 4, HZ / 2);
+#else
+			       (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 4, HZ / 2);
+#endif
+//	if(0 != result) {
+//	  printk(KERN_WARNING "read size of data = %d\, date = %d\n", result, data);
+//	}
+
+        if (status < 0)
+        {
+                printk("read_nic_dword TimeOut! status:%d\n", status);
+		if(status == -ENODEV) {
+			priv->usb_error = true;
+		}
+        }
+
+
+
+	return data;
+}
+
+
+//u8 read_phy_cck(struct net_device *dev, u8 adr);
+//u8 read_phy_ofdm(struct net_device *dev, u8 adr);
+/* this might still called in what was the PHY rtl8185/rtl8192 common code
+ * plans are to possibilty turn it again in one common code...
+ */
+inline void force_pci_posting(struct net_device *dev)
+{
+}
+
+
+static struct net_device_stats *rtl8192_stats(struct net_device *dev);
+void rtl8192_commit(struct net_device *dev);
+//void rtl8192_restart(struct net_device *dev);
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+void rtl8192_restart(struct work_struct *work);
+//void rtl8192_rq_tx_ack(struct work_struct *work);
+#else
+ void rtl8192_restart(struct net_device *dev);
+// //void rtl8192_rq_tx_ack(struct net_device *dev);
+ #endif
+
+void watch_dog_timer_callback(unsigned long data);
+
+/****************************************************************************
+   -----------------------------PROCFS STUFF-------------------------
+*****************************************************************************/
+
+static struct proc_dir_entry *rtl8192_proc = NULL;
+
+
+
+static int proc_get_stats_ap(char *page, char **start,
+			  off_t offset, int count,
+			  int *eof, void *data)
+{
+	struct net_device *dev = data;
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	struct ieee80211_device *ieee = priv->ieee80211;
+	struct ieee80211_network *target;
+
+	int len = 0;
+
+        list_for_each_entry(target, &ieee->network_list, list) {
+
+		len += snprintf(page + len, count - len,
+                "%s ", target->ssid);
+
+		if(target->wpa_ie_len>0 || target->rsn_ie_len>0){
+	                len += snprintf(page + len, count - len,
+        	        "WPA\n");
+		}
+		else{
+                        len += snprintf(page + len, count - len,
+                        "non_WPA\n");
+                }
+
+        }
+
+	*eof = 1;
+	return len;
+}
+
+#ifdef RTL8192SU
+static int proc_get_registers(char *page, char **start,
+			  off_t offset, int count,
+			  int *eof, void *data)
+{
+	struct net_device *dev = data;
+//	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+
+	int len = 0;
+	int i,n,page0,page1,page2;
+
+	int max=0xff;
+	page0 = 0x000;
+	page1 = 0x100;
+	page2 = 0x800;
+
+	/* This dump the current register page */
+	if(!IS_BB_REG_OFFSET_92S(page0)){
+		len += snprintf(page + len, count - len,
+				"\n####################page %x##################\n ", (page0>>8));
+		for(n=0;n<=max;)
+		{
+			len += snprintf(page + len, count - len,
+					"\nD:  %2x > ",n);
+			for(i=0;i<16 && n<=max;i++,n++)
+				len += snprintf(page + len, count - len,
+						"%2.2x ",read_nic_byte(dev,(page0|n)));
+		}
+	}else{
+		len += snprintf(page + len, count - len,
+				"\n####################page %x##################\n ", (page0>>8));
+		for(n=0;n<=max;)
+		{
+			len += snprintf(page + len, count - len, "\nD:  %2x > ",n);
+			for(i=0;i<4 && n<=max;n+=4,i++)
+				len += snprintf(page + len, count - len,
+						"%8.8x ",rtl8192_QueryBBReg(dev,(page0|n), bMaskDWord));
+		}
+	}
+	len += snprintf(page + len, count - len,"\n");
+	*eof = 1;
+	return len;
+
+}
+static int proc_get_registers_1(char *page, char **start,
+			  off_t offset, int count,
+			  int *eof, void *data)
+{
+	struct net_device *dev = data;
+//	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+
+	int len = 0;
+	int i,n,page0;
+
+	int max=0xff;
+	page0 = 0x100;
+
+	/* This dump the current register page */
+		len += snprintf(page + len, count - len,
+				"\n####################page %x##################\n ", (page0>>8));
+		for(n=0;n<=max;)
+		{
+			len += snprintf(page + len, count - len,
+					"\nD:  %2x > ",n);
+			for(i=0;i<16 && n<=max;i++,n++)
+				len += snprintf(page + len, count - len,
+						"%2.2x ",read_nic_byte(dev,(page0|n)));
+		}
+	len += snprintf(page + len, count - len,"\n");
+	*eof = 1;
+	return len;
+
+}
+static int proc_get_registers_2(char *page, char **start,
+			  off_t offset, int count,
+			  int *eof, void *data)
+{
+	struct net_device *dev = data;
+//	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+
+	int len = 0;
+	int i,n,page0;
+
+	int max=0xff;
+	page0 = 0x200;
+
+	/* This dump the current register page */
+		len += snprintf(page + len, count - len,
+				"\n####################page %x##################\n ", (page0>>8));
+		for(n=0;n<=max;)
+		{
+			len += snprintf(page + len, count - len,
+					"\nD:  %2x > ",n);
+			for(i=0;i<16 && n<=max;i++,n++)
+				len += snprintf(page + len, count - len,
+						"%2.2x ",read_nic_byte(dev,(page0|n)));
+		}
+	len += snprintf(page + len, count - len,"\n");
+	*eof = 1;
+	return len;
+
+}
+static int proc_get_registers_8(char *page, char **start,
+			  off_t offset, int count,
+			  int *eof, void *data)
+{
+	struct net_device *dev = data;
+
+	int len = 0;
+	int i,n,page0;
+
+	int max=0xff;
+	page0 = 0x800;
+
+	/* This dump the current register page */
+		len += snprintf(page + len, count - len,
+				"\n####################page %x##################\n ", (page0>>8));
+		for(n=0;n<=max;)
+		{
+			len += snprintf(page + len, count - len, "\nD:  %2x > ",n);
+			for(i=0;i<4 && n<=max;n+=4,i++)
+				len += snprintf(page + len, count - len,
+						"%8.8x ",rtl8192_QueryBBReg(dev,(page0|n), bMaskDWord));
+		}
+	len += snprintf(page + len, count - len,"\n");
+	*eof = 1;
+	return len;
+
+	}
+static int proc_get_registers_9(char *page, char **start,
+			  off_t offset, int count,
+			  int *eof, void *data)
+{
+	struct net_device *dev = data;
+//	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+
+	int len = 0;
+	int i,n,page0;
+
+	int max=0xff;
+	page0 = 0x900;
+
+	/* This dump the current register page */
+		len += snprintf(page + len, count - len,
+				"\n####################page %x##################\n ", (page0>>8));
+		for(n=0;n<=max;)
+		{
+			len += snprintf(page + len, count - len, "\nD:  %2x > ",n);
+			for(i=0;i<4 && n<=max;n+=4,i++)
+			len += snprintf(page + len, count - len,
+						"%8.8x ",rtl8192_QueryBBReg(dev,(page0|n), bMaskDWord));
+		}
+	len += snprintf(page + len, count - len,"\n");
+	*eof = 1;
+	return len;
+}
+static int proc_get_registers_a(char *page, char **start,
+			  off_t offset, int count,
+			  int *eof, void *data)
+{
+	struct net_device *dev = data;
+//	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+
+	int len = 0;
+	int i,n,page0;
+
+	int max=0xff;
+	page0 = 0xa00;
+
+	/* This dump the current register page */
+				len += snprintf(page + len, count - len,
+				"\n####################page %x##################\n ", (page0>>8));
+		for(n=0;n<=max;)
+		{
+			len += snprintf(page + len, count - len, "\nD:  %2x > ",n);
+			for(i=0;i<4 && n<=max;n+=4,i++)
+				len += snprintf(page + len, count - len,
+						"%8.8x ",rtl8192_QueryBBReg(dev,(page0|n), bMaskDWord));
+		}
+	len += snprintf(page + len, count - len,"\n");
+	*eof = 1;
+	return len;
+}
+static int proc_get_registers_b(char *page, char **start,
+			  off_t offset, int count,
+			  int *eof, void *data)
+{
+	struct net_device *dev = data;
+//	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+
+	int len = 0;
+	int i,n,page0;
+
+	int max=0xff;
+	page0 = 0xb00;
+
+	/* This dump the current register page */
+		len += snprintf(page + len, count - len,
+				"\n####################page %x##################\n ", (page0>>8));
+		for(n=0;n<=max;)
+		{
+			len += snprintf(page + len, count - len, "\nD:  %2x > ",n);
+			for(i=0;i<4 && n<=max;n+=4,i++)
+				len += snprintf(page + len, count - len,
+						"%8.8x ",rtl8192_QueryBBReg(dev,(page0|n), bMaskDWord));
+		}
+	len += snprintf(page + len, count - len,"\n");
+	*eof = 1;
+	return len;
+	}
+static int proc_get_registers_c(char *page, char **start,
+			  off_t offset, int count,
+			  int *eof, void *data)
+{
+	struct net_device *dev = data;
+//	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+
+	int len = 0;
+	int i,n,page0;
+
+	int max=0xff;
+	page0 = 0xc00;
+
+	/* This dump the current register page */
+		len += snprintf(page + len, count - len,
+				"\n####################page %x##################\n ", (page0>>8));
+		for(n=0;n<=max;)
+		{
+			len += snprintf(page + len, count - len, "\nD:  %2x > ",n);
+			for(i=0;i<4 && n<=max;n+=4,i++)
+				len += snprintf(page + len, count - len,
+						"%8.8x ",rtl8192_QueryBBReg(dev,(page0|n), bMaskDWord));
+		}
+	len += snprintf(page + len, count - len,"\n");
+	*eof = 1;
+	return len;
+}
+static int proc_get_registers_d(char *page, char **start,
+			  off_t offset, int count,
+			  int *eof, void *data)
+{
+	struct net_device *dev = data;
+//	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+
+	int len = 0;
+	int i,n,page0;
+
+	int max=0xff;
+	page0 = 0xd00;
+
+	/* This dump the current register page */
+		len += snprintf(page + len, count - len,
+				"\n####################page %x##################\n ", (page0>>8));
+		for(n=0;n<=max;)
+		{
+			len += snprintf(page + len, count - len, "\nD:  %2x > ",n);
+			for(i=0;i<4 && n<=max;n+=4,i++)
+				len += snprintf(page + len, count - len,
+						"%8.8x ",rtl8192_QueryBBReg(dev,(page0|n), bMaskDWord));
+		}
+	len += snprintf(page + len, count - len,"\n");
+	*eof = 1;
+	return len;
+}
+static int proc_get_registers_e(char *page, char **start,
+			  off_t offset, int count,
+			  int *eof, void *data)
+{
+	struct net_device *dev = data;
+//	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+
+	int len = 0;
+	int i,n,page0;
+
+	int max=0xff;
+	page0 = 0xe00;
+
+	/* This dump the current register page */
+		len += snprintf(page + len, count - len,
+				"\n####################page %x##################\n ", (page0>>8));
+		for(n=0;n<=max;)
+		{
+			len += snprintf(page + len, count - len, "\nD:  %2x > ",n);
+			for(i=0;i<4 && n<=max;n+=4,i++)
+				len += snprintf(page + len, count - len,
+						"%8.8x ",rtl8192_QueryBBReg(dev,(page0|n), bMaskDWord));
+		}
+	len += snprintf(page + len, count - len,"\n");
+	*eof = 1;
+	return len;
+}
+#else
+static int proc_get_registers(char *page, char **start,
+			  off_t offset, int count,
+			  int *eof, void *data)
+{
+	struct net_device *dev = data;
+//	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+
+	int len = 0;
+	int i,n;
+
+	int max=0xff;
+
+	/* This dump the current register page */
+len += snprintf(page + len, count - len,
+                        "\n####################page 0##################\n ");
+
+	for(n=0;n<=max;)
+	{
+		//printk( "\nD: %2x> ", n);
+		len += snprintf(page + len, count - len,
+			"\nD:  %2x > ",n);
+
+		for(i=0;i<16 && n<=max;i++,n++)
+		len += snprintf(page + len, count - len,
+			"%2x ",read_nic_byte(dev,0x000|n));
+
+		//	printk("%2x ",read_nic_byte(dev,n));
+	}
+#if 1
+len += snprintf(page + len, count - len,
+                        "\n####################page 1##################\n ");
+        for(n=0;n<=max;)
+        {
+                //printk( "\nD: %2x> ", n);
+                len += snprintf(page + len, count - len,
+                        "\nD:  %2x > ",n);
+
+                for(i=0;i<16 && n<=max;i++,n++)
+                len += snprintf(page + len, count - len,
+                        "%2x ",read_nic_byte(dev,0x100|n));
+
+                //      printk("%2x ",read_nic_byte(dev,n));
+        }
+len += snprintf(page + len, count - len,
+                        "\n####################page 3##################\n ");
+        for(n=0;n<=max;)
+        {
+                //printk( "\nD: %2x> ", n);
+                len += snprintf(page + len, count - len,
+                        "\nD:  %2x > ",n);
+
+                for(i=0;i<16 && n<=max;i++,n++)
+                len += snprintf(page + len, count - len,
+                        "%2x ",read_nic_byte(dev,0x300|n));
+
+                //      printk("%2x ",read_nic_byte(dev,n));
+        }
+
+#endif
+
+	len += snprintf(page + len, count - len,"\n");
+	*eof = 1;
+	return len;
+
+}
+#endif
+
+#if 0
+static int proc_get_cck_reg(char *page, char **start,
+			  off_t offset, int count,
+			  int *eof, void *data)
+{
+	struct net_device *dev = data;
+//	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+
+	int len = 0;
+	int i,n;
+
+	int max = 0x5F;
+
+	/* This dump the current register page */
+	for(n=0;n<=max;)
+	{
+		//printk( "\nD: %2x> ", n);
+		len += snprintf(page + len, count - len,
+			"\nD:  %2x > ",n);
+
+		for(i=0;i<16 && n<=max;i++,n++)
+		len += snprintf(page + len, count - len,
+			"%2x ",read_phy_cck(dev,n));
+
+		//	printk("%2x ",read_nic_byte(dev,n));
+	}
+	len += snprintf(page + len, count - len,"\n");
+
+
+	*eof = 1;
+	return len;
+}
+
+#endif
+
+#if 0
+static int proc_get_ofdm_reg(char *page, char **start,
+			  off_t offset, int count,
+			  int *eof, void *data)
+{
+	struct net_device *dev = data;
+//	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+
+	int len = 0;
+	int i,n;
+
+	//int max=0xff;
+	int max = 0x40;
+
+	/* This dump the current register page */
+	for(n=0;n<=max;)
+	{
+		//printk( "\nD: %2x> ", n);
+		len += snprintf(page + len, count - len,
+			"\nD:  %2x > ",n);
+
+		for(i=0;i<16 && n<=max;i++,n++)
+		len += snprintf(page + len, count - len,
+			"%2x ",read_phy_ofdm(dev,n));
+
+		//	printk("%2x ",read_nic_byte(dev,n));
+	}
+	len += snprintf(page + len, count - len,"\n");
+
+
+
+	*eof = 1;
+	return len;
+}
+
+#endif
+
+#if 0
+static int proc_get_stats_hw(char *page, char **start,
+			  off_t offset, int count,
+			  int *eof, void *data)
+{
+	struct net_device *dev = data;
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+
+	int len = 0;
+
+	len += snprintf(page + len, count - len,
+		"NIC int: %lu\n"
+		"Total int: %lu\n",
+		priv->stats.ints,
+		priv->stats.shints);
+
+	*eof = 1;
+	return len;
+}
+#endif
+
+static int proc_get_stats_tx(char *page, char **start,
+			  off_t offset, int count,
+			  int *eof, void *data)
+{
+	struct net_device *dev = data;
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+
+	int len = 0;
+
+	len += snprintf(page + len, count - len,
+		"TX VI priority ok int: %lu\n"
+		"TX VI priority error int: %lu\n"
+		"TX VO priority ok int: %lu\n"
+		"TX VO priority error int: %lu\n"
+		"TX BE priority ok int: %lu\n"
+		"TX BE priority error int: %lu\n"
+		"TX BK priority ok int: %lu\n"
+		"TX BK priority error int: %lu\n"
+		"TX MANAGE priority ok int: %lu\n"
+		"TX MANAGE priority error int: %lu\n"
+		"TX BEACON priority ok int: %lu\n"
+		"TX BEACON priority error int: %lu\n"
+//		"TX high priority ok int: %lu\n"
+//		"TX high priority failed error int: %lu\n"
+		"TX queue resume: %lu\n"
+		"TX queue stopped?: %d\n"
+		"TX fifo overflow: %lu\n"
+//		"TX beacon: %lu\n"
+		"TX VI queue: %d\n"
+		"TX VO queue: %d\n"
+		"TX BE queue: %d\n"
+		"TX BK queue: %d\n"
+//		"TX HW queue: %d\n"
+		"TX VI dropped: %lu\n"
+		"TX VO dropped: %lu\n"
+		"TX BE dropped: %lu\n"
+		"TX BK dropped: %lu\n"
+		"TX total data packets %lu\n",
+//		"TX beacon aborted: %lu\n",
+		priv->stats.txviokint,
+		priv->stats.txvierr,
+		priv->stats.txvookint,
+		priv->stats.txvoerr,
+		priv->stats.txbeokint,
+		priv->stats.txbeerr,
+		priv->stats.txbkokint,
+		priv->stats.txbkerr,
+		priv->stats.txmanageokint,
+		priv->stats.txmanageerr,
+		priv->stats.txbeaconokint,
+		priv->stats.txbeaconerr,
+//		priv->stats.txhpokint,
+//		priv->stats.txhperr,
+		priv->stats.txresumed,
+		netif_queue_stopped(dev),
+		priv->stats.txoverflow,
+//		priv->stats.txbeacon,
+		atomic_read(&(priv->tx_pending[VI_PRIORITY])),
+		atomic_read(&(priv->tx_pending[VO_PRIORITY])),
+		atomic_read(&(priv->tx_pending[BE_PRIORITY])),
+		atomic_read(&(priv->tx_pending[BK_PRIORITY])),
+//		read_nic_byte(dev, TXFIFOCOUNT),
+		priv->stats.txvidrop,
+		priv->stats.txvodrop,
+		priv->stats.txbedrop,
+		priv->stats.txbkdrop,
+		priv->stats.txdatapkt
+//		priv->stats.txbeaconerr
+		);
+
+	*eof = 1;
+	return len;
+}
+
+
+
+static int proc_get_stats_rx(char *page, char **start,
+			  off_t offset, int count,
+			  int *eof, void *data)
+{
+	struct net_device *dev = data;
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+
+	int len = 0;
+
+	len += snprintf(page + len, count - len,
+		"RX packets: %lu\n"
+		"RX urb status error: %lu\n"
+		"RX invalid urb error: %lu\n",
+		priv->stats.rxoktotal,
+		priv->stats.rxstaterr,
+		priv->stats.rxurberr);
+
+	*eof = 1;
+	return len;
+}
+#if 0
+#if WIRELESS_EXT >= 12 && WIRELESS_EXT < 17
+
+static struct iw_statistics *r8192_get_wireless_stats(struct net_device *dev)
+{
+       struct r8192_priv *priv = ieee80211_priv(dev);
+
+       return &priv->wstats;
+}
+#endif
+#endif
+void rtl8192_proc_module_init(void)
+{
+	RT_TRACE(COMP_INIT, "Initializing proc filesystem");
+#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
+	rtl8192_proc=create_proc_entry(RTL819xU_MODULE_NAME, S_IFDIR, proc_net);
+#else
+	rtl8192_proc=create_proc_entry(RTL819xU_MODULE_NAME, S_IFDIR, init_net.proc_net);
+#endif
+}
+
+
+void rtl8192_proc_module_remove(void)
+{
+#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
+	remove_proc_entry(RTL819xU_MODULE_NAME, proc_net);
+#else
+	remove_proc_entry(RTL819xU_MODULE_NAME, init_net.proc_net);
+#endif
+}
+
+
+void rtl8192_proc_remove_one(struct net_device *dev)
+{
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+
+
+	if (priv->dir_dev) {
+	//	remove_proc_entry("stats-hw", priv->dir_dev);
+		remove_proc_entry("stats-tx", priv->dir_dev);
+		remove_proc_entry("stats-rx", priv->dir_dev);
+	//	remove_proc_entry("stats-ieee", priv->dir_dev);
+		remove_proc_entry("stats-ap", priv->dir_dev);
+		remove_proc_entry("registers", priv->dir_dev);
+		remove_proc_entry("registers-1", priv->dir_dev);
+		remove_proc_entry("registers-2", priv->dir_dev);
+		remove_proc_entry("registers-8", priv->dir_dev);
+		remove_proc_entry("registers-9", priv->dir_dev);
+		remove_proc_entry("registers-a", priv->dir_dev);
+		remove_proc_entry("registers-b", priv->dir_dev);
+		remove_proc_entry("registers-c", priv->dir_dev);
+		remove_proc_entry("registers-d", priv->dir_dev);
+		remove_proc_entry("registers-e", priv->dir_dev);
+	//	remove_proc_entry("cck-registers",priv->dir_dev);
+	//	remove_proc_entry("ofdm-registers",priv->dir_dev);
+		//remove_proc_entry(dev->name, rtl8192_proc);
+		remove_proc_entry("wlan0", rtl8192_proc);
+		priv->dir_dev = NULL;
+	}
+}
+
+
+void rtl8192_proc_init_one(struct net_device *dev)
+{
+	struct proc_dir_entry *e;
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	priv->dir_dev = create_proc_entry(dev->name,
+					  S_IFDIR | S_IRUGO | S_IXUGO,
+					  rtl8192_proc);
+	if (!priv->dir_dev) {
+		RT_TRACE(COMP_ERR, "Unable to initialize /proc/net/rtl8192/%s\n",
+		      dev->name);
+		return;
+	}
+	#if 0
+	e = create_proc_read_entry("stats-hw", S_IFREG | S_IRUGO,
+				   priv->dir_dev, proc_get_stats_hw, dev);
+
+	if (!e) {
+		DMESGE("Unable to initialize "
+		      "/proc/net/rtl8192/%s/stats-hw\n",
+		      dev->name);
+	}
+	#endif
+	e = create_proc_read_entry("stats-rx", S_IFREG | S_IRUGO,
+				   priv->dir_dev, proc_get_stats_rx, dev);
+
+	if (!e) {
+		RT_TRACE(COMP_ERR,"Unable to initialize "
+		      "/proc/net/rtl8192/%s/stats-rx\n",
+		      dev->name);
+	}
+
+
+	e = create_proc_read_entry("stats-tx", S_IFREG | S_IRUGO,
+				   priv->dir_dev, proc_get_stats_tx, dev);
+
+	if (!e) {
+		RT_TRACE(COMP_ERR, "Unable to initialize "
+		      "/proc/net/rtl8192/%s/stats-tx\n",
+		      dev->name);
+	}
+	#if 0
+	e = create_proc_read_entry("stats-ieee", S_IFREG | S_IRUGO,
+				   priv->dir_dev, proc_get_stats_ieee, dev);
+
+	if (!e) {
+		DMESGE("Unable to initialize "
+		      "/proc/net/rtl8192/%s/stats-ieee\n",
+		      dev->name);
+	}
+
+	#endif
+
+	e = create_proc_read_entry("stats-ap", S_IFREG | S_IRUGO,
+				   priv->dir_dev, proc_get_stats_ap, dev);
+
+	if (!e) {
+		RT_TRACE(COMP_ERR, "Unable to initialize "
+		      "/proc/net/rtl8192/%s/stats-ap\n",
+		      dev->name);
+	}
+
+	e = create_proc_read_entry("registers", S_IFREG | S_IRUGO,
+				   priv->dir_dev, proc_get_registers, dev);
+	if (!e) {
+		RT_TRACE(COMP_ERR, "Unable to initialize "
+		      "/proc/net/rtl8192/%s/registers\n",
+		      dev->name);
+	}
+#ifdef RTL8192SU
+	e = create_proc_read_entry("registers-1", S_IFREG | S_IRUGO,
+				   priv->dir_dev, proc_get_registers_1, dev);
+	if (!e) {
+		RT_TRACE(COMP_ERR, "Unable to initialize "
+		      "/proc/net/rtl8192/%s/registers-1\n",
+		      dev->name);
+	}
+	e = create_proc_read_entry("registers-2", S_IFREG | S_IRUGO,
+				   priv->dir_dev, proc_get_registers_2, dev);
+	if (!e) {
+		RT_TRACE(COMP_ERR, "Unable to initialize "
+		      "/proc/net/rtl8192/%s/registers-2\n",
+		      dev->name);
+	}
+	e = create_proc_read_entry("registers-8", S_IFREG | S_IRUGO,
+				   priv->dir_dev, proc_get_registers_8, dev);
+	if (!e) {
+		RT_TRACE(COMP_ERR, "Unable to initialize "
+		      "/proc/net/rtl8192/%s/registers-8\n",
+		      dev->name);
+	}
+	e = create_proc_read_entry("registers-9", S_IFREG | S_IRUGO,
+				   priv->dir_dev, proc_get_registers_9, dev);
+	if (!e) {
+		RT_TRACE(COMP_ERR, "Unable to initialize "
+		      "/proc/net/rtl8192/%s/registers-9\n",
+		      dev->name);
+	}
+	e = create_proc_read_entry("registers-a", S_IFREG | S_IRUGO,
+				   priv->dir_dev, proc_get_registers_a, dev);
+	if (!e) {
+		RT_TRACE(COMP_ERR, "Unable to initialize "
+		      "/proc/net/rtl8192/%s/registers-a\n",
+		      dev->name);
+	}
+	e = create_proc_read_entry("registers-b", S_IFREG | S_IRUGO,
+				   priv->dir_dev, proc_get_registers_b, dev);
+	if (!e) {
+		RT_TRACE(COMP_ERR, "Unable to initialize "
+		      "/proc/net/rtl8192/%s/registers-b\n",
+		      dev->name);
+	}
+	e = create_proc_read_entry("registers-c", S_IFREG | S_IRUGO,
+				   priv->dir_dev, proc_get_registers_c, dev);
+	if (!e) {
+		RT_TRACE(COMP_ERR, "Unable to initialize "
+		      "/proc/net/rtl8192/%s/registers-c\n",
+		      dev->name);
+	}
+	e = create_proc_read_entry("registers-d", S_IFREG | S_IRUGO,
+				   priv->dir_dev, proc_get_registers_d, dev);
+	if (!e) {
+		RT_TRACE(COMP_ERR, "Unable to initialize "
+		      "/proc/net/rtl8192/%s/registers-d\n",
+		      dev->name);
+	}
+	e = create_proc_read_entry("registers-e", S_IFREG | S_IRUGO,
+				   priv->dir_dev, proc_get_registers_e, dev);
+	if (!e) {
+		RT_TRACE(COMP_ERR, "Unable to initialize "
+		      "/proc/net/rtl8192/%s/registers-e\n",
+		      dev->name);
+	}
+#endif
+#if 0
+	e = create_proc_read_entry("cck-registers", S_IFREG | S_IRUGO,
+				   priv->dir_dev, proc_get_cck_reg, dev);
+	if (!e) {
+		RT_TRACE(COMP_ERR, "Unable to initialize "
+		      "/proc/net/rtl8192/%s/cck-registers\n",
+		      dev->name);
+	}
+
+	e = create_proc_read_entry("ofdm-registers", S_IFREG | S_IRUGO,
+				   priv->dir_dev, proc_get_ofdm_reg, dev);
+	if (!e) {
+		RT_TRACE(COMP_ERR, "Unable to initialize "
+		      "/proc/net/rtl8192/%s/ofdm-registers\n",
+		      dev->name);
+	}
+#endif
+}
+/****************************************************************************
+   -----------------------------MISC STUFF-------------------------
+*****************************************************************************/
+
+/* this is only for debugging */
+void print_buffer(u32 *buffer, int len)
+{
+	int i;
+	u8 *buf =(u8*)buffer;
+
+	printk("ASCII BUFFER DUMP (len: %x):\n",len);
+
+	for(i=0;i<len;i++)
+		printk("%c",buf[i]);
+
+	printk("\nBINARY BUFFER DUMP (len: %x):\n",len);
+
+	for(i=0;i<len;i++)
+		printk("%x",buf[i]);
+
+	printk("\n");
+}
+
+//short check_nic_enough_desc(struct net_device *dev, priority_t priority)
+short check_nic_enough_desc(struct net_device *dev,int queue_index)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	int used = atomic_read(&priv->tx_pending[queue_index]);
+
+	return (used < MAX_TX_URB);
+}
+
+void tx_timeout(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	//rtl8192_commit(dev);
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+	schedule_work(&priv->reset_wq);
+#else
+	schedule_task(&priv->reset_wq);
+#endif
+	//DMESG("TXTIMEOUT");
+}
+
+
+/* this is only for debug */
+void dump_eprom(struct net_device *dev)
+{
+	int i;
+	for(i=0; i<63; i++)
+		RT_TRACE(COMP_EPROM, "EEPROM addr %x : %x", i, eprom_read(dev,i));
+}
+
+/* this is only for debug */
+void rtl8192_dump_reg(struct net_device *dev)
+{
+	int i;
+	int n;
+	int max=0x1ff;
+
+	RT_TRACE(COMP_PHY, "Dumping NIC register map");
+
+	for(n=0;n<=max;)
+	{
+		printk( "\nD: %2x> ", n);
+		for(i=0;i<16 && n<=max;i++,n++)
+			printk("%2x ",read_nic_byte(dev,n));
+	}
+	printk("\n");
+}
+
+/****************************************************************************
+      ------------------------------HW STUFF---------------------------
+*****************************************************************************/
+
+#if 0
+void rtl8192_irq_enable(struct net_device *dev)
+{
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	//priv->irq_enabled = 1;
+/*
+	write_nic_word(dev,INTA_MASK,INTA_RXOK | INTA_RXDESCERR | INTA_RXOVERFLOW |\
+	INTA_TXOVERFLOW | INTA_HIPRIORITYDESCERR | INTA_HIPRIORITYDESCOK |\
+	INTA_NORMPRIORITYDESCERR | INTA_NORMPRIORITYDESCOK |\
+	INTA_LOWPRIORITYDESCERR | INTA_LOWPRIORITYDESCOK | INTA_TIMEOUT);
+*/
+	write_nic_word(dev,INTA_MASK, priv->irq_mask);
+}
+
+
+void rtl8192_irq_disable(struct net_device *dev)
+{
+//	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+
+	write_nic_word(dev,INTA_MASK,0);
+	force_pci_posting(dev);
+//	priv->irq_enabled = 0;
+}
+#endif
+
+void rtl8192_set_mode(struct net_device *dev,int mode)
+{
+	u8 ecmd;
+	ecmd=read_nic_byte(dev, EPROM_CMD);
+	ecmd=ecmd &~ EPROM_CMD_OPERATING_MODE_MASK;
+	ecmd=ecmd | (mode<<EPROM_CMD_OPERATING_MODE_SHIFT);
+	ecmd=ecmd &~ (1<<EPROM_CS_SHIFT);
+	ecmd=ecmd &~ (1<<EPROM_CK_SHIFT);
+	write_nic_byte(dev, EPROM_CMD, ecmd);
+}
+
+
+void rtl8192_update_msr(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u8 msr;
+
+	msr  = read_nic_byte(dev, MSR);
+	msr &= ~ MSR_LINK_MASK;
+
+	/* do not change in link_state != WLAN_LINK_ASSOCIATED.
+	 * msr must be updated if the state is ASSOCIATING.
+	 * this is intentional and make sense for ad-hoc and
+	 * master (see the create BSS/IBSS func)
+	 */
+	if (priv->ieee80211->state == IEEE80211_LINKED){
+
+		if (priv->ieee80211->iw_mode == IW_MODE_INFRA)
+			msr |= (MSR_LINK_MANAGED<<MSR_LINK_SHIFT);
+		else if (priv->ieee80211->iw_mode == IW_MODE_ADHOC)
+			msr |= (MSR_LINK_ADHOC<<MSR_LINK_SHIFT);
+		else if (priv->ieee80211->iw_mode == IW_MODE_MASTER)
+			msr |= (MSR_LINK_MASTER<<MSR_LINK_SHIFT);
+
+	}else
+		msr |= (MSR_LINK_NONE<<MSR_LINK_SHIFT);
+
+	write_nic_byte(dev, MSR, msr);
+}
+
+void rtl8192_set_chan(struct net_device *dev,short ch)
+{
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+//	u32 tx;
+	RT_TRACE(COMP_CH, "=====>%s()====ch:%d\n", __FUNCTION__, ch);
+	//printk("=====>%s()====ch:%d\n", __FUNCTION__, ch);
+	priv->chan=ch;
+	#if 0
+	if(priv->ieee80211->iw_mode == IW_MODE_ADHOC ||
+		priv->ieee80211->iw_mode == IW_MODE_MASTER){
+
+			priv->ieee80211->link_state = WLAN_LINK_ASSOCIATED;
+			priv->ieee80211->master_chan = ch;
+			rtl8192_update_beacon_ch(dev);
+		}
+	#endif
+
+	/* this hack should avoid frame TX during channel setting*/
+
+
+//	tx = read_nic_dword(dev,TX_CONF);
+//	tx &= ~TX_LOOPBACK_MASK;
+
+#ifndef LOOP_TEST
+//	write_nic_dword(dev,TX_CONF, tx |( TX_LOOPBACK_MAC<<TX_LOOPBACK_SHIFT));
+
+	//need to implement rf set channel here WB
+
+	if (priv->rf_set_chan)
+	priv->rf_set_chan(dev,priv->chan);
+	mdelay(10);
+//	write_nic_dword(dev,TX_CONF,tx | (TX_LOOPBACK_NONE<<TX_LOOPBACK_SHIFT));
+#endif
+}
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
+static void rtl8192_rx_isr(struct urb *urb, struct pt_regs *regs);
+#else
+static void rtl8192_rx_isr(struct urb *urb);
+#endif
+//static void rtl8192_rx_isr(struct urb *rx_urb);
+
+u32 get_rxpacket_shiftbytes_819xusb(struct ieee80211_rx_stats *pstats)
+{
+
+#ifdef USB_RX_AGGREGATION_SUPPORT
+	if (pstats->bisrxaggrsubframe)
+		return (sizeof(rx_desc_819x_usb) + pstats->RxDrvInfoSize
+			+ pstats->RxBufShift + 8);
+	else
+#endif
+		return (sizeof(rx_desc_819x_usb) + pstats->RxDrvInfoSize
+				+ pstats->RxBufShift);
+
+}
+static int rtl8192_rx_initiate(struct net_device*dev)
+{
+        struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+        struct urb *entry;
+        struct sk_buff *skb;
+        struct rtl8192_rx_info *info;
+
+	/* nomal packet rx procedure */
+        while (skb_queue_len(&priv->rx_queue) < MAX_RX_URB) {
+                skb = __dev_alloc_skb(RX_URB_SIZE, GFP_KERNEL);
+                if (!skb)
+                        break;
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	        entry = usb_alloc_urb(0, GFP_KERNEL);
+#else
+	        entry = usb_alloc_urb(0);
+#endif
+                if (!entry) {
+                        kfree_skb(skb);
+                        break;
+                }
+//		printk("nomal packet IN request!\n");
+                usb_fill_bulk_urb(entry, priv->udev,
+                                  usb_rcvbulkpipe(priv->udev, 3), skb->tail,
+                                  RX_URB_SIZE, rtl8192_rx_isr, skb);
+                info = (struct rtl8192_rx_info *) skb->cb;
+                info->urb = entry;
+                info->dev = dev;
+		info->out_pipe = 3; //denote rx normal packet queue
+                skb_queue_tail(&priv->rx_queue, skb);
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+                usb_submit_urb(entry, GFP_KERNEL);
+#else
+                usb_submit_urb(entry);
+#endif
+        }
+
+	/* command packet rx procedure */
+        while (skb_queue_len(&priv->rx_queue) < MAX_RX_URB + 3) {
+//		printk("command packet IN request!\n");
+                skb = __dev_alloc_skb(RX_URB_SIZE ,GFP_KERNEL);
+                if (!skb)
+                        break;
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+                entry = usb_alloc_urb(0, GFP_KERNEL);
+#else
+                entry = usb_alloc_urb(0);
+#endif
+                if (!entry) {
+                        kfree_skb(skb);
+                        break;
+                }
+                usb_fill_bulk_urb(entry, priv->udev,
+                                  usb_rcvbulkpipe(priv->udev, 9), skb->tail,
+                                  RX_URB_SIZE, rtl8192_rx_isr, skb);
+                info = (struct rtl8192_rx_info *) skb->cb;
+                info->urb = entry;
+                info->dev = dev;
+		   info->out_pipe = 9; //denote rx cmd packet queue
+                skb_queue_tail(&priv->rx_queue, skb);
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+		usb_submit_urb(entry, GFP_KERNEL);
+#else
+		usb_submit_urb(entry);
+#endif
+        }
+
+        return 0;
+}
+
+void rtl8192_set_rxconf(struct net_device *dev)
+{
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	u32 rxconf;
+
+	rxconf=read_nic_dword(dev,RCR);
+	rxconf = rxconf &~ MAC_FILTER_MASK;
+	rxconf = rxconf | RCR_AMF;
+	rxconf = rxconf | RCR_ADF;
+	rxconf = rxconf | RCR_AB;
+	rxconf = rxconf | RCR_AM;
+	//rxconf = rxconf | RCR_ACF;
+
+	if (dev->flags & IFF_PROMISC) {DMESG ("NIC in promisc mode");}
+
+	if(priv->ieee80211->iw_mode == IW_MODE_MONITOR || \
+	   dev->flags & IFF_PROMISC){
+		rxconf = rxconf | RCR_AAP;
+	} /*else if(priv->ieee80211->iw_mode == IW_MODE_MASTER){
+		rxconf = rxconf | (1<<ACCEPT_ALLMAC_FRAME_SHIFT);
+		rxconf = rxconf | (1<<RX_CHECK_BSSID_SHIFT);
+	}*/else{
+		rxconf = rxconf | RCR_APM;
+		rxconf = rxconf | RCR_CBSSID;
+	}
+
+
+	if(priv->ieee80211->iw_mode == IW_MODE_MONITOR){
+		rxconf = rxconf | RCR_AICV;
+		rxconf = rxconf | RCR_APWRMGT;
+	}
+
+	if( priv->crcmon == 1 && priv->ieee80211->iw_mode == IW_MODE_MONITOR)
+		rxconf = rxconf | RCR_ACRC32;
+
+
+	rxconf = rxconf &~ RX_FIFO_THRESHOLD_MASK;
+	rxconf = rxconf | (RX_FIFO_THRESHOLD_NONE<<RX_FIFO_THRESHOLD_SHIFT);
+	rxconf = rxconf &~ MAX_RX_DMA_MASK;
+	rxconf = rxconf | ((u32)7<<RCR_MXDMA_OFFSET);
+
+//	rxconf = rxconf | (1<<RX_AUTORESETPHY_SHIFT);
+	rxconf = rxconf | RCR_ONLYERLPKT;
+
+//	rxconf = rxconf &~ RCR_CS_MASK;
+//	rxconf = rxconf | (1<<RCR_CS_SHIFT);
+
+	write_nic_dword(dev, RCR, rxconf);
+
+	#ifdef DEBUG_RX
+	DMESG("rxconf: %x %x",rxconf ,read_nic_dword(dev,RCR));
+	#endif
+}
+//wait to be removed
+void rtl8192_rx_enable(struct net_device *dev)
+{
+	//u8 cmd;
+
+	//struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+
+	rtl8192_rx_initiate(dev);
+
+//	rtl8192_set_rxconf(dev);
+#if 0
+	if(NIC_8187 == priv->card_8187) {
+		cmd=read_nic_byte(dev,CMD);
+		write_nic_byte(dev,CMD,cmd | (1<<CMD_RX_ENABLE_SHIFT));
+	}
+	else {
+		//write_nic_dword(dev, RX_CONF, priv->ReceiveConfig);
+	}
+#endif
+}
+
+
+void rtl8192_tx_enable(struct net_device *dev)
+{
+#if 0
+	u8 cmd;
+	u8 byte;
+	u32 txconf;
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	//test loopback
+	//	priv->TransmitConfig |= (TX_LOOPBACK_BASEBAND<<TX_LOOPBACK_SHIFT);
+	if(NIC_8187B == priv->card_8187){
+		write_nic_dword(dev, TX_CONF, priv->TransmitConfig);
+		byte = read_nic_byte(dev, MSR);
+		byte |= MSR_LINK_ENEDCA;
+		write_nic_byte(dev, MSR, byte);
+	} else {
+		byte = read_nic_byte(dev,CW_CONF);
+		byte &= ~(1<<CW_CONF_PERPACKET_CW_SHIFT);
+		byte &= ~(1<<CW_CONF_PERPACKET_RETRY_SHIFT);
+		write_nic_byte(dev, CW_CONF, byte);
+
+		byte = read_nic_byte(dev, TX_AGC_CTL);
+		byte &= ~(1<<TX_AGC_CTL_PERPACKET_GAIN_SHIFT);
+		byte &= ~(1<<TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT);
+		byte &= ~(1<<TX_AGC_CTL_FEEDBACK_ANT);
+		write_nic_byte(dev, TX_AGC_CTL, byte);
+
+		txconf= read_nic_dword(dev,TX_CONF);
+
+
+		txconf = txconf &~ TX_LOOPBACK_MASK;
+
+#ifndef LOOP_TEST
+		txconf = txconf | (TX_LOOPBACK_NONE<<TX_LOOPBACK_SHIFT);
+#else
+		txconf = txconf | (TX_LOOPBACK_BASEBAND<<TX_LOOPBACK_SHIFT);
+#endif
+		txconf = txconf &~ TCR_SRL_MASK;
+		txconf = txconf &~ TCR_LRL_MASK;
+
+		txconf = txconf | (priv->retry_data<<TX_LRLRETRY_SHIFT); // long
+		txconf = txconf | (priv->retry_rts<<TX_SRLRETRY_SHIFT); // short
+
+		txconf = txconf &~ (1<<TX_NOCRC_SHIFT);
+
+		txconf = txconf &~ TCR_MXDMA_MASK;
+		txconf = txconf | (TCR_MXDMA_2048<<TCR_MXDMA_SHIFT);
+
+		txconf = txconf | TCR_DISReqQsize;
+		txconf = txconf | TCR_DISCW;
+		txconf = txconf &~ TCR_SWPLCPLEN;
+
+		txconf=txconf | (1<<TX_NOICV_SHIFT);
+
+		write_nic_dword(dev,TX_CONF,txconf);
+
+#ifdef DEBUG_TX
+		DMESG("txconf: %x %x",txconf,read_nic_dword(dev,TX_CONF));
+#endif
+
+		cmd=read_nic_byte(dev,CMD);
+		write_nic_byte(dev,CMD,cmd | (1<<CMD_TX_ENABLE_SHIFT));
+	}
+#endif
+}
+
+#if 0
+void rtl8192_beacon_tx_enable(struct net_device *dev)
+{
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	priv->dma_poll_mask &=~(1<<TX_DMA_STOP_BEACON_SHIFT);
+	rtl8192_set_mode(dev,EPROM_CMD_CONFIG);
+	write_nic_byte(dev,TX_DMA_POLLING,priv->dma_poll_mask);
+	rtl8192_set_mode(dev,EPROM_CMD_NORMAL);
+}
+
+
+void rtl8192_
+_disable(struct net_device *dev)
+{
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	priv->dma_poll_mask |= (1<<TX_DMA_STOP_BEACON_SHIFT);
+	rtl8192_set_mode(dev,EPROM_CMD_CONFIG);
+	write_nic_byte(dev,TX_DMA_POLLING,priv->dma_poll_mask);
+	rtl8192_set_mode(dev,EPROM_CMD_NORMAL);
+}
+
+#endif
+
+
+void rtl8192_rtx_disable(struct net_device *dev)
+{
+	u8 cmd;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	struct sk_buff *skb;
+	struct rtl8192_rx_info *info;
+
+	cmd=read_nic_byte(dev,CMDR);
+	write_nic_byte(dev, CMDR, cmd &~ \
+		(CR_TE|CR_RE));
+	force_pci_posting(dev);
+	mdelay(10);
+
+	while ((skb = __skb_dequeue(&priv->rx_queue))) {
+		info = (struct rtl8192_rx_info *) skb->cb;
+		if (!info->urb)
+			continue;
+
+		usb_kill_urb(info->urb);
+		kfree_skb(skb);
+	}
+
+	if (skb_queue_len(&priv->skb_queue)) {
+		printk(KERN_WARNING "skb_queue not empty\n");
+	}
+
+	skb_queue_purge(&priv->skb_queue);
+	return;
+}
+
+
+int alloc_tx_beacon_desc_ring(struct net_device *dev, int count)
+{
+	#if 0
+	int i;
+	u32 *tmp;
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+
+	priv->txbeaconring = (u32*)pci_alloc_consistent(priv->pdev,
+					  sizeof(u32)*8*count,
+					  &priv->txbeaconringdma);
+	if (!priv->txbeaconring) return -1;
+	for (tmp=priv->txbeaconring,i=0;i<count;i++){
+		*tmp = *tmp &~ (1<<31); // descriptor empty, owned by the drv
+		/*
+		*(tmp+2) = (u32)dma_tmp;
+		*(tmp+3) = bufsize;
+		*/
+		if(i+1<count)
+			*(tmp+4) = (u32)priv->txbeaconringdma+((i+1)*8*4);
+		else
+			*(tmp+4) = (u32)priv->txbeaconringdma;
+
+		tmp=tmp+8;
+	}
+	#endif
+	return 0;
+}
+
+#if 0
+void rtl8192_reset(struct net_device *dev)
+{
+
+	//struct r8192_priv *priv = ieee80211_priv(dev);
+	//u8 cr;
+
+
+	/* make sure the analog power is on before
+	 * reset, otherwise reset may fail
+	 */
+#if 0
+	if(NIC_8187 == priv->card_8187) {
+		rtl8192_set_anaparam(dev, RTL8225_ANAPARAM_ON);
+		rtl8185_set_anaparam2(dev, RTL8225_ANAPARAM2_ON);
+		rtl8192_irq_disable(dev);
+		mdelay(200);
+		write_nic_byte_E(dev,0x18,0x10);
+		write_nic_byte_E(dev,0x18,0x11);
+		write_nic_byte_E(dev,0x18,0x00);
+		mdelay(200);
+	}
+#endif
+	printk("=====>reset?\n");
+#if 0
+	cr=read_nic_byte(dev,CMD);
+	cr = cr & 2;
+	cr = cr | (1<<CMD_RST_SHIFT);
+	write_nic_byte(dev,CMD,cr);
+
+	force_pci_posting(dev);
+
+	mdelay(200);
+
+	if(read_nic_byte(dev,CMD) & (1<<CMD_RST_SHIFT))
+		RT_TRACE(COMP_ERR, "Card reset timeout!\n");
+	else
+		RT_TRACE(COMP_DOWN, "Card successfully reset\n");
+#endif
+#if 0
+	if(NIC_8187 == priv->card_8187) {
+
+		printk("This is RTL8187 Reset procedure\n");
+		rtl8192_set_mode(dev,EPROM_CMD_LOAD);
+		force_pci_posting(dev);
+		mdelay(200);
+
+		/* after the eeprom load cycle, make sure we have
+		 * correct anaparams
+		 */
+		rtl8192_set_anaparam(dev, RTL8225_ANAPARAM_ON);
+		rtl8185_set_anaparam2(dev, RTL8225_ANAPARAM2_ON);
+	}
+	else
+#endif
+		printk("This is RTL8187B Reset procedure\n");
+
+}
+#endif
+inline u16 ieeerate2rtlrate(int rate)
+{
+	switch(rate){
+	case 10:
+	return 0;
+	case 20:
+	return 1;
+	case 55:
+	return 2;
+	case 110:
+	return 3;
+	case 60:
+	return 4;
+	case 90:
+	return 5;
+	case 120:
+	return 6;
+	case 180:
+	return 7;
+	case 240:
+	return 8;
+	case 360:
+	return 9;
+	case 480:
+	return 10;
+	case 540:
+	return 11;
+	default:
+	return 3;
+
+	}
+}
+static u16 rtl_rate[] = {10,20,55,110,60,90,120,180,240,360,480,540};
+inline u16 rtl8192_rate2rate(short rate)
+{
+	if (rate >11) return 0;
+	return rtl_rate[rate];
+}
+
+
+/* The protype of rx_isr has changed since one verion of Linux Kernel */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
+static void rtl8192_rx_isr(struct urb *urb, struct pt_regs *regs)
+#else
+static void rtl8192_rx_isr(struct urb *urb)
+#endif
+{
+        struct sk_buff *skb = (struct sk_buff *) urb->context;
+        struct rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
+        struct net_device *dev = info->dev;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	int out_pipe = info->out_pipe;
+	int err;
+	if(!priv->up)
+		return;
+        if (unlikely(urb->status)) {
+                info->urb = NULL;
+                priv->stats.rxstaterr++;
+                priv->ieee80211->stats.rx_errors++;
+                usb_free_urb(urb);
+	//	printk("%s():rx status err\n",__FUNCTION__);
+                return;
+        }
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,14)
+        skb_unlink(skb, &priv->rx_queue);
+#else
+	/*
+	 * __skb_unlink before linux2.6.14 does not use spinlock to protect list head.
+	 * add spinlock function manually. john,2008/12/03
+	 */
+	{
+		unsigned long flags;
+		spin_lock_irqsave(&(priv->rx_queue.lock), flags);
+		__skb_unlink(skb,&priv->rx_queue);
+		spin_unlock_irqrestore(&(priv->rx_queue.lock), flags);
+	}
+#endif
+        skb_put(skb, urb->actual_length);
+
+	skb_queue_tail(&priv->skb_queue, skb);
+	tasklet_schedule(&priv->irq_rx_tasklet);
+
+        skb = dev_alloc_skb(RX_URB_SIZE);
+        if (unlikely(!skb)) {
+                usb_free_urb(urb);
+		printk("%s():can,t alloc skb\n",__FUNCTION__);
+                /* TODO check rx queue length and refill *somewhere* */
+                return;
+        }
+
+	usb_fill_bulk_urb(urb, priv->udev,
+			usb_rcvbulkpipe(priv->udev, out_pipe), skb->tail,
+			RX_URB_SIZE, rtl8192_rx_isr, skb);
+
+        info = (struct rtl8192_rx_info *) skb->cb;
+        info->urb = urb;
+        info->dev = dev;
+	info->out_pipe = out_pipe;
+
+        urb->transfer_buffer = skb->tail;
+        urb->context = skb;
+        skb_queue_tail(&priv->rx_queue, skb);
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+        err = usb_submit_urb(urb, GFP_ATOMIC);
+#else
+        err = usb_submit_urb(urb);
+#endif
+	if(err && err != EPERM)
+		printk("can not submit rxurb, err is %x,URB status is %x\n",err,urb->status);
+}
+
+u32
+rtl819xusb_rx_command_packet(
+	struct net_device *dev,
+	struct ieee80211_rx_stats *pstats
+	)
+{
+	u32	status;
+
+	//RT_TRACE(COMP_RECV, DBG_TRACE, ("---> RxCommandPacketHandle819xUsb()\n"));
+
+	status = cmpk_message_handle_rx(dev, pstats);
+	if (status)
+	{
+		DMESG("rxcommandpackethandle819xusb: It is a command packet\n");
+	}
+	else
+	{
+		//RT_TRACE(COMP_RECV, DBG_TRACE, ("RxCommandPacketHandle819xUsb: It is not a command packet\n"));
+	}
+
+	//RT_TRACE(COMP_RECV, DBG_TRACE, ("<--- RxCommandPacketHandle819xUsb()\n"));
+	return status;
+}
+
+#if 0
+void rtl8192_tx_queues_stop(struct net_device *dev)
+{
+	//struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	u8 dma_poll_mask = (1<<TX_DMA_STOP_LOWPRIORITY_SHIFT);
+	dma_poll_mask |= (1<<TX_DMA_STOP_HIPRIORITY_SHIFT);
+	dma_poll_mask |= (1<<TX_DMA_STOP_NORMPRIORITY_SHIFT);
+	dma_poll_mask |= (1<<TX_DMA_STOP_BEACON_SHIFT);
+
+	rtl8192_set_mode(dev,EPROM_CMD_CONFIG);
+	write_nic_byte(dev,TX_DMA_POLLING,dma_poll_mask);
+	rtl8192_set_mode(dev,EPROM_CMD_NORMAL);
+}
+#endif
+
+void rtl8192_data_hard_stop(struct net_device *dev)
+{
+	//FIXME !!
+	#if 0
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	priv->dma_poll_mask |= (1<<TX_DMA_STOP_LOWPRIORITY_SHIFT);
+	rtl8192_set_mode(dev,EPROM_CMD_CONFIG);
+	write_nic_byte(dev,TX_DMA_POLLING,priv->dma_poll_mask);
+	rtl8192_set_mode(dev,EPROM_CMD_NORMAL);
+	#endif
+}
+
+
+void rtl8192_data_hard_resume(struct net_device *dev)
+{
+	// FIXME !!
+	#if 0
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	priv->dma_poll_mask &= ~(1<<TX_DMA_STOP_LOWPRIORITY_SHIFT);
+	rtl8192_set_mode(dev,EPROM_CMD_CONFIG);
+	write_nic_byte(dev,TX_DMA_POLLING,priv->dma_poll_mask);
+	rtl8192_set_mode(dev,EPROM_CMD_NORMAL);
+	#endif
+}
+
+/* this function TX data frames when the ieee80211 stack requires this.
+ * It checks also if we need to stop the ieee tx queue, eventually do it
+ */
+void rtl8192_hard_data_xmit(struct sk_buff *skb, struct net_device *dev, int rate)
+{
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	int ret;
+	unsigned long flags;
+	cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
+	u8 queue_index = tcb_desc->queue_index;
+
+	/* shall not be referred by command packet */
+	assert(queue_index != TXCMD_QUEUE);
+
+	spin_lock_irqsave(&priv->tx_lock,flags);
+
+        memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev));
+//	tcb_desc->RATRIndex = 7;
+//	tcb_desc->bTxDisableRateFallBack = 1;
+//	tcb_desc->bTxUseDriverAssingedRate = 1;
+	tcb_desc->bTxEnableFwCalcDur = 1;
+	skb_push(skb, priv->ieee80211->tx_headroom);
+	ret = priv->ops->rtl819x_tx(dev, skb);
+
+	//priv->ieee80211->stats.tx_bytes+=(skb->len - priv->ieee80211->tx_headroom);
+	//priv->ieee80211->stats.tx_packets++;
+
+	spin_unlock_irqrestore(&priv->tx_lock,flags);
+
+//	return ret;
+	return;
+}
+
+/* This is a rough attempt to TX a frame
+ * This is called by the ieee 80211 stack to TX management frames.
+ * If the ring is full packet are dropped (for data frame the queue
+ * is stopped before this can happen).
+ */
+int rtl8192_hard_start_xmit(struct sk_buff *skb,struct net_device *dev)
+{
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	int ret;
+	unsigned long flags;
+        cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
+        u8 queue_index = tcb_desc->queue_index;
+
+
+	spin_lock_irqsave(&priv->tx_lock,flags);
+
+        memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev));
+	if(queue_index == TXCMD_QUEUE) {
+		skb_push(skb, USB_HWDESC_HEADER_LEN);
+		priv->ops->rtl819x_tx_cmd(dev, skb);
+		ret = 1;
+	        spin_unlock_irqrestore(&priv->tx_lock,flags);
+		return ret;
+	} else {
+		skb_push(skb, priv->ieee80211->tx_headroom);
+		ret = priv->ops->rtl819x_tx(dev, skb);
+	}
+
+	spin_unlock_irqrestore(&priv->tx_lock,flags);
+
+	return ret;
+}
+
+
+void rtl8192_try_wake_queue(struct net_device *dev, int pri);
+
+#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
+u16 DrvAggr_PaddingAdd(struct net_device *dev, struct sk_buff *skb)
+{
+	u16     PaddingNum =  256 - ((skb->len + TX_PACKET_DRVAGGR_SUBFRAME_SHIFT_BYTES) % 256);
+	return  (PaddingNum&0xff);
+}
+
+u8 MRateToHwRate8190Pci(u8 rate);
+u8 QueryIsShort(u8 TxHT, u8 TxRate, cb_desc *tcb_desc);
+u8 MapHwQueueToFirmwareQueue(u8 QueueID);
+struct sk_buff *DrvAggr_Aggregation(struct net_device *dev, struct ieee80211_drv_agg_txb *pSendList)
+{
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+	struct ieee80211_device *ieee = netdev_priv(dev);
+#else
+	struct ieee80211_device *ieee = (struct ieee80211_device *)dev->priv;
+#endif
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	cb_desc 	*tcb_desc = NULL;
+	u8 		i;
+	u32		TotalLength;
+	struct sk_buff	*skb;
+	struct sk_buff  *agg_skb;
+	tx_desc_819x_usb_aggr_subframe *tx_agg_desc = NULL;
+	tx_fwinfo_819x_usb	       *tx_fwinfo = NULL;
+
+	//
+	// Local variable initialization.
+	//
+	/* first skb initialization */
+	skb = pSendList->tx_agg_frames[0];
+	TotalLength = skb->len;
+
+	/* Get the total aggregation length including the padding space and
+	 * sub frame header.
+	 */
+	for(i = 1; i < pSendList->nr_drv_agg_frames; i++) {
+		TotalLength += DrvAggr_PaddingAdd(dev, skb);
+		skb = pSendList->tx_agg_frames[i];
+		TotalLength += (skb->len + TX_PACKET_DRVAGGR_SUBFRAME_SHIFT_BYTES);
+	}
+
+	/* allocate skb to contain the aggregated packets */
+	agg_skb = dev_alloc_skb(TotalLength + ieee->tx_headroom);
+	memset(agg_skb->data, 0, agg_skb->len);
+	skb_reserve(agg_skb, ieee->tx_headroom);
+
+//	RT_DEBUG_DATA(COMP_SEND, skb->cb, sizeof(skb->cb));
+	/* reserve info for first subframe Tx descriptor to be set in the tx function */
+	skb = pSendList->tx_agg_frames[0];
+	tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
+	tcb_desc->drv_agg_enable = 1;
+	tcb_desc->pkt_size = skb->len;
+ 	tcb_desc->DrvAggrNum = pSendList->nr_drv_agg_frames;
+	printk("DrvAggNum = %d\n", tcb_desc->DrvAggrNum);
+//	RT_DEBUG_DATA(COMP_SEND, skb->cb, sizeof(skb->cb));
+//	printk("========>skb->data ======> \n");
+//	RT_DEBUG_DATA(COMP_SEND, skb->data, skb->len);
+	memcpy(agg_skb->cb, skb->cb, sizeof(skb->cb));
+	memcpy(skb_put(agg_skb,skb->len),skb->data,skb->len);
+
+	for(i = 1; i < pSendList->nr_drv_agg_frames; i++) {
+		/* push the next sub frame to be 256 byte aline */
+		skb_put(agg_skb,DrvAggr_PaddingAdd(dev,skb));
+
+		/* Subframe drv Tx descriptor and firmware info setting */
+		skb = pSendList->tx_agg_frames[i];
+		tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
+		tx_agg_desc = (tx_desc_819x_usb_aggr_subframe *)agg_skb->tail;
+		tx_fwinfo = (tx_fwinfo_819x_usb *)(agg_skb->tail + sizeof(tx_desc_819x_usb_aggr_subframe));
+
+		memset(tx_fwinfo,0,sizeof(tx_fwinfo_819x_usb));
+		/* DWORD 0 */
+		tx_fwinfo->TxHT = (tcb_desc->data_rate&0x80)?1:0;
+		tx_fwinfo->TxRate = MRateToHwRate8190Pci(tcb_desc->data_rate);
+		tx_fwinfo->EnableCPUDur = tcb_desc->bTxEnableFwCalcDur;
+		tx_fwinfo->Short = QueryIsShort(tx_fwinfo->TxHT, tx_fwinfo->TxRate, tcb_desc);
+		if(tcb_desc->bAMPDUEnable) {//AMPDU enabled
+			tx_fwinfo->AllowAggregation = 1;
+			/* DWORD 1 */
+			tx_fwinfo->RxMF = tcb_desc->ampdu_factor;
+			tx_fwinfo->RxAMD = tcb_desc->ampdu_density&0x07;//ampdudensity
+		} else {
+			tx_fwinfo->AllowAggregation = 0;
+			/* DWORD 1 */
+			tx_fwinfo->RxMF = 0;
+			tx_fwinfo->RxAMD = 0;
+		}
+
+		/* Protection mode related */
+		tx_fwinfo->RtsEnable = (tcb_desc->bRTSEnable)?1:0;
+		tx_fwinfo->CtsEnable = (tcb_desc->bCTSEnable)?1:0;
+		tx_fwinfo->RtsSTBC = (tcb_desc->bRTSSTBC)?1:0;
+		tx_fwinfo->RtsHT = (tcb_desc->rts_rate&0x80)?1:0;
+		tx_fwinfo->RtsRate =  MRateToHwRate8190Pci((u8)tcb_desc->rts_rate);
+		tx_fwinfo->RtsSubcarrier = (tx_fwinfo->RtsHT==0)?(tcb_desc->RTSSC):0;
+		tx_fwinfo->RtsBandwidth = (tx_fwinfo->RtsHT==1)?((tcb_desc->bRTSBW)?1:0):0;
+		tx_fwinfo->RtsShort = (tx_fwinfo->RtsHT==0)?(tcb_desc->bRTSUseShortPreamble?1:0):\
+				      (tcb_desc->bRTSUseShortGI?1:0);
+
+		/* Set Bandwidth and sub-channel settings. */
+		if(priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40)
+		{
+			if(tcb_desc->bPacketBW) {
+				tx_fwinfo->TxBandwidth = 1;
+				tx_fwinfo->TxSubCarrier = 0;    //By SD3's Jerry suggestion, use duplicated mode
+			} else {
+				tx_fwinfo->TxBandwidth = 0;
+				tx_fwinfo->TxSubCarrier = priv->nCur40MhzPrimeSC;
+			}
+		} else {
+			tx_fwinfo->TxBandwidth = 0;
+			tx_fwinfo->TxSubCarrier = 0;
+		}
+
+		/* Fill Tx descriptor */
+		memset(tx_agg_desc, 0, sizeof(tx_desc_819x_usb_aggr_subframe));
+		/* DWORD 0 */
+		//tx_agg_desc->LINIP = 0;
+		//tx_agg_desc->CmdInit = 1;
+		tx_agg_desc->Offset =  sizeof(tx_fwinfo_819x_usb) + 8;
+		/* already raw data, need not to substract header length */
+		tx_agg_desc->PktSize = skb->len & 0xffff;
+
+		/*DWORD 1*/
+		tx_agg_desc->SecCAMID= 0;
+		tx_agg_desc->RATid = tcb_desc->RATRIndex;
+#if 0
+		/* Fill security related */
+		if( pTcb->bEncrypt && !Adapter->MgntInfo.SecurityInfo.SWTxEncryptFlag)
+		{
+			EncAlg = SecGetEncryptionOverhead(
+					Adapter,
+					&EncryptionMPDUHeadOverhead,
+					&EncryptionMPDUTailOverhead,
+					NULL,
+					NULL,
+					FALSE,
+					FALSE);
+			//2004/07/22, kcwu, EncryptionMPDUHeadOverhead has been added in previous code
+			//MPDUOverhead = EncryptionMPDUHeadOverhead + EncryptionMPDUTailOverhead;
+			MPDUOverhead = EncryptionMPDUTailOverhead;
+			tx_agg_desc->NoEnc = 0;
+			RT_TRACE(COMP_SEC, DBG_LOUD, ("******We in the loop SecCAMID is %d SecDescAssign is %d The Sec is %d********\n",tx_agg_desc->SecCAMID,tx_agg_desc->SecDescAssign,EncAlg));
+			//CamDumpAll(Adapter);
+		}
+		else
+#endif
+		{
+			//MPDUOverhead = 0;
+			tx_agg_desc->NoEnc = 1;
+		}
+#if 0
+		switch(EncAlg){
+			case NO_Encryption:
+				tx_agg_desc->SecType = 0x0;
+				break;
+			case WEP40_Encryption:
+			case WEP104_Encryption:
+				tx_agg_desc->SecType = 0x1;
+				break;
+			case TKIP_Encryption:
+				tx_agg_desc->SecType = 0x2;
+				break;
+			case AESCCMP_Encryption:
+				tx_agg_desc->SecType = 0x3;
+				break;
+			default:
+				tx_agg_desc->SecType = 0x0;
+				break;
+		}
+#else
+		tx_agg_desc->SecType = 0x0;
+#endif
+
+		if (tcb_desc->bHwSec) {
+			switch (priv->ieee80211->pairwise_key_type)
+			{
+				case KEY_TYPE_WEP40:
+				case KEY_TYPE_WEP104:
+					tx_agg_desc->SecType = 0x1;
+					tx_agg_desc->NoEnc = 0;
+					break;
+				case KEY_TYPE_TKIP:
+					tx_agg_desc->SecType = 0x2;
+					tx_agg_desc->NoEnc = 0;
+					break;
+				case KEY_TYPE_CCMP:
+					tx_agg_desc->SecType = 0x3;
+					tx_agg_desc->NoEnc = 0;
+					break;
+				case KEY_TYPE_NA:
+					tx_agg_desc->SecType = 0x0;
+					tx_agg_desc->NoEnc = 1;
+					break;
+			}
+		}
+
+		tx_agg_desc->QueueSelect = MapHwQueueToFirmwareQueue(tcb_desc->queue_index);
+		tx_agg_desc->TxFWInfoSize =  sizeof(tx_fwinfo_819x_usb);
+
+		tx_agg_desc->DISFB = tcb_desc->bTxDisableRateFallBack;
+		tx_agg_desc->USERATE = tcb_desc->bTxUseDriverAssingedRate;
+
+		tx_agg_desc->OWN = 1;
+
+		//DWORD 2
+		/* According windows driver, it seems that there no need to fill this field */
+		//tx_agg_desc->TxBufferSize= (u32)(skb->len - USB_HWDESC_HEADER_LEN);
+
+		/* to fill next packet */
+		skb_put(agg_skb,TX_PACKET_DRVAGGR_SUBFRAME_SHIFT_BYTES);
+		memcpy(skb_put(agg_skb,skb->len),skb->data,skb->len);
+	}
+
+	for(i = 0; i < pSendList->nr_drv_agg_frames; i++) {
+		dev_kfree_skb_any(pSendList->tx_agg_frames[i]);
+	}
+
+	return agg_skb;
+}
+
+/* NOTE:
+	This function return a list of PTCB which is proper to be aggregate with the input TCB.
+	If no proper TCB is found to do aggregation, SendList will only contain the input TCB.
+*/
+u8 DrvAggr_GetAggregatibleList(struct net_device *dev, struct sk_buff *skb,
+		struct ieee80211_drv_agg_txb *pSendList)
+{
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+	struct ieee80211_device *ieee = netdev_priv(dev);
+#else
+	struct ieee80211_device *ieee = (struct ieee80211_device *)dev->priv;
+#endif
+	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
+	u16		nMaxAggrNum = pHTInfo->UsbTxAggrNum;
+	cb_desc 	*tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
+	u8		QueueID = tcb_desc->queue_index;
+
+	do {
+		pSendList->tx_agg_frames[pSendList->nr_drv_agg_frames++] = skb;
+		if(pSendList->nr_drv_agg_frames >= nMaxAggrNum) {
+			break;
+		}
+
+	} while((skb = skb_dequeue(&ieee->skb_drv_aggQ[QueueID])));
+
+	RT_TRACE(COMP_AMSDU, "DrvAggr_GetAggregatibleList, nAggrTcbNum = %d \n", pSendList->nr_drv_agg_frames);
+	return pSendList->nr_drv_agg_frames;
+}
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
+static void rtl8192_tx_isr(struct urb *tx_urb, struct pt_regs *reg)
+#else
+static void rtl8192_tx_isr(struct urb *tx_urb)
+#endif
+{
+	struct sk_buff *skb = (struct sk_buff*)tx_urb->context;
+	struct net_device *dev = NULL;
+	struct r8192_priv *priv = NULL;
+	cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
+	u8  queue_index = tcb_desc->queue_index;
+//	bool bToSend0Byte;
+//	u16 BufLen = skb->len;
+
+	memcpy(&dev,(struct net_device*)(skb->cb),sizeof(struct net_device*));
+	priv = ieee80211_priv(dev);
+
+	if(tcb_desc->queue_index != TXCMD_QUEUE) {
+		if(tx_urb->status == 0) {
+		//	dev->trans_start = jiffies;
+			// As act as station mode, destion shall be  unicast address.
+			//priv->ieee80211->stats.tx_bytes+=(skb->len - priv->ieee80211->tx_headroom);
+			//priv->ieee80211->stats.tx_packets++;
+			priv->stats.txoktotal++;
+			priv->ieee80211->LinkDetectInfo.NumTxOkInPeriod++;
+			priv->stats.txbytesunicast += (skb->len - priv->ieee80211->tx_headroom);
+		} else {
+			priv->ieee80211->stats.tx_errors++;
+			//priv->stats.txmanageerr++;
+			/* TODO */
+		}
+	}
+
+	/* free skb and tx_urb */
+	if(skb != NULL) {
+		dev_kfree_skb_any(skb);
+		usb_free_urb(tx_urb);
+		atomic_dec(&priv->tx_pending[queue_index]);
+	}
+
+#if 0  //we need to send zero byte packet just after 512 byte(64 byte)packet is transmitted, or we will halt. It will greatly reduced available page in FW, and ruin our throughput. WB 2008.08.27
+	if(BufLen > 0 && ((BufLen % 512 == 0)||(BufLen % 64 == 0))) {
+		bToSend0Byte = true;
+	}
+
+	bToSend0Byte = false;
+	//
+	// Note that, we at most handle 1 MPDU to send here, either
+	// fragment or MPDU in wait queue.
+	//
+	if(!bToSend0Byte)
+#endif
+	{
+		//
+		// Handle HW Beacon:
+		// We had transfer our beacon frame to host controler at this moment.
+		//
+#if 0
+		if(tcb_desc->tx_queue == BEACON_QUEUE)
+		{
+			priv->bSendingBeacon = FALSE;
+		}
+#endif
+		//
+		// Caution:
+		// Handling the wait queue of command packets.
+		// For Tx command packets, we must not do TCB fragment because it is not handled right now.
+		// We must cut the packets to match the size of TX_CMD_PKT before we send it.
+		//
+	if (queue_index == MGNT_QUEUE){
+        if (priv->ieee80211->ack_tx_to_ieee){
+            if (rtl8192_is_tx_queue_empty(dev)){
+                priv->ieee80211->ack_tx_to_ieee = 0;
+                ieee80211_ps_tx_ack(priv->ieee80211, 1);
+            }
+        }
+    }
+		/* Handle MPDU in wait queue. */
+		if(queue_index != BEACON_QUEUE) {
+			/* Don't send data frame during scanning.*/
+			if((skb_queue_len(&priv->ieee80211->skb_waitQ[queue_index]) != 0)&&\
+					(!(priv->ieee80211->queue_stop))) {
+				if(NULL != (skb = skb_dequeue(&(priv->ieee80211->skb_waitQ[queue_index]))))
+					priv->ieee80211->softmac_hard_start_xmit(skb, dev);
+
+				return; //modified by david to avoid further processing AMSDU
+			}
+#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
+			else if ((skb_queue_len(&priv->ieee80211->skb_drv_aggQ[queue_index])!= 0)&&\
+ 				(!(priv->ieee80211->queue_stop))) {
+				// Tx Driver Aggregation process
+				/* The driver will aggregation the packets according to the following stets
+				 * 1. check whether there's tx irq available, for it's a completion return
+				 *    function, it should contain enough tx irq;
+				 * 2. check pakcet type;
+				 * 3. intialize sendlist, check whether the to-be send packet no greater than 1
+				 * 4. aggregation the packets, and fill firmware info and tx desc to it, etc.
+				 * 5. check whehter the packet could be sent, otherwise just insert to wait head
+				 * */
+				skb = skb_dequeue(&priv->ieee80211->skb_drv_aggQ[queue_index]);
+				if(!check_nic_enough_desc(dev, queue_index)) {
+					skb_queue_head(&(priv->ieee80211->skb_drv_aggQ[queue_index]), skb);
+					return;
+				}
+
+				{
+					/*TODO*/
+					/*
+					u8* pHeader = skb->data;
+
+					if(IsMgntQosData(pHeader) ||
+				            IsMgntQData_Ack(pHeader) ||
+					    IsMgntQData_Poll(pHeader) ||
+					    IsMgntQData_Poll_Ack(pHeader)
+					  )
+					*/
+					{
+						struct ieee80211_drv_agg_txb SendList;
+
+						memset(&SendList, 0, sizeof(struct ieee80211_drv_agg_txb));
+						if(DrvAggr_GetAggregatibleList(dev, skb, &SendList) > 1) {
+							skb = DrvAggr_Aggregation(dev, &SendList);
+
+#if 0
+						printk("=============>to send aggregated packet!\n");
+						RT_DEBUG_DATA(COMP_SEND, skb->cb, sizeof(skb->cb));
+						printk("\n=================skb->len = %d\n", skb->len);
+						RT_DEBUG_DATA(COMP_SEND, skb->data, skb->len);
+#endif
+						}
+					}
+					priv->ieee80211->softmac_hard_start_xmit(skb, dev);
+				}
+			}
+#endif
+		}
+	}
+
+#if 0
+	else
+	{
+		RT_TRACE( COMP_SEND,"HalUsbOutComplete(%d): bToSend0Byte.\n", PipeIndex);
+
+		//
+		// In this case, we don't return skb now.
+		// It will be returned when the 0-byte request completed.
+		//
+
+		//
+		// Bulk out an 0-byte padding transfer.
+		//
+		HalUsbOut0Byte(pAdapter, PipeIndex, skb);
+	}
+
+#endif
+}
+
+void rtl8192_beacon_stop(struct net_device *dev)
+{
+	u8 msr, msrm, msr2;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	msr  = read_nic_byte(dev, MSR);
+	msrm = msr & MSR_LINK_MASK;
+	msr2 = msr & ~MSR_LINK_MASK;
+
+	if(NIC_8192U == priv->card_8192) {
+		usb_kill_urb(priv->rx_urb[MAX_RX_URB]);
+	}
+	if ((msrm == (MSR_LINK_ADHOC<<MSR_LINK_SHIFT) ||
+		(msrm == (MSR_LINK_MASTER<<MSR_LINK_SHIFT)))){
+		write_nic_byte(dev, MSR, msr2 | MSR_LINK_NONE);
+		write_nic_byte(dev, MSR, msr);
+	}
+}
+
+void rtl8192_config_rate(struct net_device* dev, u16* rate_config)
+{
+	 struct r8192_priv *priv = ieee80211_priv(dev);
+	 struct ieee80211_network *net;
+	 u8 i=0, basic_rate = 0;
+	 net = & priv->ieee80211->current_network;
+
+	 for (i=0; i<net->rates_len; i++)
+	 {
+		 basic_rate = net->rates[i]&0x7f;
+		 switch(basic_rate)
+		 {
+			 case MGN_1M:	*rate_config |= RRSR_1M;	break;
+			 case MGN_2M:	*rate_config |= RRSR_2M;	break;
+			 case MGN_5_5M:	*rate_config |= RRSR_5_5M;	break;
+			 case MGN_11M:	*rate_config |= RRSR_11M;	break;
+			 case MGN_6M:	*rate_config |= RRSR_6M;	break;
+			 case MGN_9M:	*rate_config |= RRSR_9M;	break;
+			 case MGN_12M:	*rate_config |= RRSR_12M;	break;
+			 case MGN_18M:	*rate_config |= RRSR_18M;	break;
+			 case MGN_24M:	*rate_config |= RRSR_24M;	break;
+			 case MGN_36M:	*rate_config |= RRSR_36M;	break;
+			 case MGN_48M:	*rate_config |= RRSR_48M;	break;
+			 case MGN_54M:	*rate_config |= RRSR_54M;	break;
+		 }
+	 }
+	 for (i=0; i<net->rates_ex_len; i++)
+	 {
+		 basic_rate = net->rates_ex[i]&0x7f;
+		 switch(basic_rate)
+		 {
+			 case MGN_1M:	*rate_config |= RRSR_1M;	break;
+			 case MGN_2M:	*rate_config |= RRSR_2M;	break;
+			 case MGN_5_5M:	*rate_config |= RRSR_5_5M;	break;
+			 case MGN_11M:	*rate_config |= RRSR_11M;	break;
+			 case MGN_6M:	*rate_config |= RRSR_6M;	break;
+			 case MGN_9M:	*rate_config |= RRSR_9M;	break;
+			 case MGN_12M:	*rate_config |= RRSR_12M;	break;
+			 case MGN_18M:	*rate_config |= RRSR_18M;	break;
+			 case MGN_24M:	*rate_config |= RRSR_24M;	break;
+			 case MGN_36M:	*rate_config |= RRSR_36M;	break;
+			 case MGN_48M:	*rate_config |= RRSR_48M;	break;
+			 case MGN_54M:	*rate_config |= RRSR_54M;	break;
+		 }
+	 }
+}
+
+
+#define SHORT_SLOT_TIME 9
+#define NON_SHORT_SLOT_TIME 20
+
+void rtl8192_update_cap(struct net_device* dev, u16 cap)
+{
+	//u32 tmp = 0;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	struct ieee80211_network *net = &priv->ieee80211->current_network;
+	priv->short_preamble = cap & WLAN_CAPABILITY_SHORT_PREAMBLE;
+
+	//LZM MOD 090303 HW_VAR_ACK_PREAMBLE
+#ifdef RTL8192SU
+	if(0)
+	{
+		u8 tmp = 0;
+		tmp = ((priv->nCur40MhzPrimeSC) << 5);
+		if (priv->short_preamble)
+			tmp |= 0x80;
+		write_nic_byte(dev, RRSR+2, tmp);
+	}
+#else
+	{
+	u32 tmp = 0;
+	tmp = priv->basic_rate;
+	if (priv->short_preamble)
+		tmp |= BRSR_AckShortPmb;
+	write_nic_dword(dev, RRSR, tmp);
+	}
+#endif
+
+	if (net->mode & (IEEE_G|IEEE_N_24G))
+	{
+		u8 slot_time = 0;
+		if ((cap & WLAN_CAPABILITY_SHORT_SLOT)&&(!priv->ieee80211->pHTInfo->bCurrentRT2RTLongSlotTime))
+		{//short slot time
+			slot_time = SHORT_SLOT_TIME;
+		}
+		else //long slot time
+			slot_time = NON_SHORT_SLOT_TIME;
+		priv->slot_time = slot_time;
+		write_nic_byte(dev, SLOT_TIME, slot_time);
+	}
+
+}
+void rtl8192_net_update(struct net_device *dev)
+{
+
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	struct ieee80211_network *net;
+	u16 BcnTimeCfg = 0, BcnCW = 6, BcnIFS = 0xf;
+	u16 rate_config = 0;
+	net = & priv->ieee80211->current_network;
+
+	rtl8192_config_rate(dev, &rate_config);
+	priv->basic_rate = rate_config &= 0x15f;
+
+	write_nic_dword(dev,BSSIDR,((u32*)net->bssid)[0]);
+	write_nic_word(dev,BSSIDR+4,((u16*)net->bssid)[2]);
+	//for(i=0;i<ETH_ALEN;i++)
+	//	write_nic_byte(dev,BSSID+i,net->bssid[i]);
+
+	rtl8192_update_msr(dev);
+//	rtl8192_update_cap(dev, net->capability);
+	if (priv->ieee80211->iw_mode == IW_MODE_ADHOC)
+	{
+	write_nic_word(dev, ATIMWND, 2);
+	write_nic_word(dev, BCN_DMATIME, 1023);
+	write_nic_word(dev, BCN_INTERVAL, net->beacon_interval);
+//	write_nic_word(dev, BcnIntTime, 100);
+	write_nic_word(dev, BCN_DRV_EARLY_INT, 1);
+	write_nic_byte(dev, BCN_ERR_THRESH, 100);
+		BcnTimeCfg |= (BcnCW<<BCN_TCFG_CW_SHIFT);
+	// TODO: BcnIFS may required to be changed on ASIC
+	 	BcnTimeCfg |= BcnIFS<<BCN_TCFG_IFS;
+
+	write_nic_word(dev, BCN_TCFG, BcnTimeCfg);
+	}
+
+
+
+}
+
+//temporary hw beacon is not used any more.
+//open it when necessary
+#if 1
+void rtl819xusb_beacon_tx(struct net_device *dev,u16  tx_rate)
+{
+
+#if 0
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	struct sk_buff *skb;
+	int i = 0;
+	//u8 cr;
+
+	rtl8192_net_update(dev);
+
+	skb = ieee80211_get_beacon(priv->ieee80211);
+		if(!skb){
+			DMESG("not enought memory for allocating beacon");
+			return;
+		}
+
+
+		write_nic_byte(dev, BQREQ, read_nic_byte(dev, BQREQ) | (1<<7));
+
+		i=0;
+		//while(!read_nic_byte(dev,BQREQ & (1<<7)))
+		while( (read_nic_byte(dev, BQREQ) & (1<<7)) == 0 )
+		{
+			msleep_interruptible_rtl(HZ/2);
+			if(i++ > 10){
+				DMESGW("get stuck to wait HW beacon to be ready");
+				return ;
+			}
+		}
+	skb->cb[0] = NORM_PRIORITY;
+	skb->cb[1] = 0; //morefragment = 0
+	skb->cb[2] = ieeerate2rtlrate(tx_rate);
+
+	rtl8192_tx(dev,skb);
+
+#endif
+}
+#endif
+inline u8 rtl8192_IsWirelessBMode(u16 rate)
+{
+	if( ((rate <= 110) && (rate != 60) && (rate != 90)) || (rate == 220) )
+		return 1;
+	else return 0;
+}
+
+u16 N_DBPSOfRate(u16 DataRate);
+
+u16 ComputeTxTime(
+	u16		FrameLength,
+	u16		DataRate,
+	u8		bManagementFrame,
+	u8		bShortPreamble
+)
+{
+	u16	FrameTime;
+	u16	N_DBPS;
+	u16	Ceiling;
+
+	if( rtl8192_IsWirelessBMode(DataRate) )
+	{
+		if( bManagementFrame || !bShortPreamble || DataRate == 10 )
+		{	// long preamble
+			FrameTime = (u16)(144+48+(FrameLength*8/(DataRate/10)));
+		}
+		else
+		{	// Short preamble
+			FrameTime = (u16)(72+24+(FrameLength*8/(DataRate/10)));
+		}
+		if( ( FrameLength*8 % (DataRate/10) ) != 0 ) //Get the Ceilling
+				FrameTime ++;
+	} else {	//802.11g DSSS-OFDM PLCP length field calculation.
+		N_DBPS = N_DBPSOfRate(DataRate);
+		Ceiling = (16 + 8*FrameLength + 6) / N_DBPS
+				+ (((16 + 8*FrameLength + 6) % N_DBPS) ? 1 : 0);
+		FrameTime = (u16)(16 + 4 + 4*Ceiling + 6);
+	}
+	return FrameTime;
+}
+
+u16 N_DBPSOfRate(u16 DataRate)
+{
+	 u16 N_DBPS = 24;
+
+	 switch(DataRate)
+	 {
+	 case 60:
+	  N_DBPS = 24;
+	  break;
+
+	 case 90:
+	  N_DBPS = 36;
+	  break;
+
+	 case 120:
+	  N_DBPS = 48;
+	  break;
+
+	 case 180:
+	  N_DBPS = 72;
+	  break;
+
+	 case 240:
+	  N_DBPS = 96;
+	  break;
+
+	 case 360:
+	  N_DBPS = 144;
+	  break;
+
+	 case 480:
+	  N_DBPS = 192;
+	  break;
+
+	 case 540:
+	  N_DBPS = 216;
+	  break;
+
+	 default:
+	  break;
+	 }
+
+	 return N_DBPS;
+}
+
+void rtl819xU_cmd_isr(struct urb *tx_cmd_urb, struct pt_regs *regs)
+{
+#if 0
+	struct net_device *dev = (struct net_device*)tx_cmd_urb->context;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	int		   last_init_packet = 0;
+	u8		   *ptr_cmd_buf;
+	u16		    cmd_buf_len;
+
+	if(tx_cmd_urb->status != 0) {
+		priv->pFirmware.firmware_seg_index = 0; //only begin transter, should it can be set to 1
+	}
+
+	/* Free the urb and the corresponding buf for common Tx cmd packet, or
+	 * last segment of each firmware img.
+	 */
+	if((priv->pFirmware.firmware_seg_index == 0) ||(priv->pFirmware.firmware_seg_index == priv->pFirmware.firmware_seg_maxnum)) {
+		priv->pFirmware.firmware_seg_index = 0;//only begin transter, should it can be set to 1
+	} else {
+		/* prepare for last transfer */
+		/* update some infomation for */
+		/* last segment of the firmware img need indicate to device */
+		priv->pFirmware.firmware_seg_index++;
+		if(priv->pFirmware.firmware_seg_index == priv->pFirmware.firmware_seg_maxnum) {
+			last_init_packet = 1;
+		}
+
+		cmd_buf_len = priv->pFirmware.firmware_seg_container[priv->pFirmware.firmware_seg_index-1].seg_size;
+		ptr_cmd_buf = priv->pFfirmware.firmware_seg_container[priv->pFfirmware.firmware_seg_index-1].seg_ptr;
+		rtl819xU_tx_cmd(dev, ptr_cmd_buf, cmd_buf_len, last_init_packet, DESC_PACKET_TYPE_INIT);
+	}
+
+	kfree(tx_cmd_urb->transfer_buffer);
+#endif
+	usb_free_urb(tx_cmd_urb);
+}
+
+unsigned int txqueue2outpipe(struct r8192_priv* priv,unsigned int tx_queue) {
+
+	if(tx_queue >= 9)
+	{
+		RT_TRACE(COMP_ERR,"%s():Unknown queue ID!!!\n",__FUNCTION__);
+		return 0x04;
+	}
+	return priv->txqueue_to_outpipemap[tx_queue];
+}
+
+#ifdef RTL8192SU
+short rtl8192SU_tx_cmd(struct net_device *dev, struct sk_buff *skb)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	int			status;
+	struct urb		*tx_urb;
+	unsigned int 		idx_pipe;
+	tx_desc_cmd_819x_usb *pdesc = (tx_desc_cmd_819x_usb *)skb->data;
+	cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
+	u8 queue_index = tcb_desc->queue_index;
+	u32			PktSize = 0;
+
+	//printk("\n %s::::::::::::::::::::::queue_index = %d\n",__FUNCTION__, queue_index);
+	atomic_inc(&priv->tx_pending[queue_index]);
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	tx_urb = usb_alloc_urb(0,GFP_ATOMIC);
+#else
+	tx_urb = usb_alloc_urb(0);
+#endif
+	if(!tx_urb){
+		dev_kfree_skb(skb);
+		return -ENOMEM;
+	}
+
+	memset(pdesc, 0, USB_HWDESC_HEADER_LEN);
+
+	/* Tx descriptor ought to be set according to the skb->cb */
+	pdesc->LINIP = tcb_desc->bLastIniPkt;
+	PktSize = (u16)(skb->len - USB_HWDESC_HEADER_LEN);
+	pdesc->PktSize = PktSize;
+	//printk("PKTSize = %d %x\n",pdesc->PktSize,pdesc->PktSize);
+	//----------------------------------------------------------------------------
+	// Fill up USB_OUT_CONTEXT.
+	//----------------------------------------------------------------------------
+	// Get index to out pipe from specified QueueID.
+	idx_pipe = txqueue2outpipe(priv,queue_index);
+	//printk("=============>%s queue_index:%d, outpipe:%d\n", __func__,queue_index,priv->RtOutPipes[idx_pipe]);
+
+#ifdef JOHN_DUMP_TXDESC
+	int i;
+	printk("Len = %d\n", skb->len);
+	for (i = 0; i < 8; i++)
+		printk("%2.2x ", *((u8*)skb->data+i));
+	printk("\n");
+#endif
+
+	usb_fill_bulk_urb(tx_urb,
+	                            priv->udev,
+	                            usb_sndbulkpipe(priv->udev,priv->RtOutPipes[idx_pipe]),
+	                            skb->data,
+	                            skb->len,
+	                            rtl8192_tx_isr,
+	                            skb);
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	status = usb_submit_urb(tx_urb, GFP_ATOMIC);
+#else
+	status = usb_submit_urb(tx_urb);
+#endif
+
+	if (!status){
+		return 0;
+	}else{
+		printk("Error TX CMD URB, error %d",
+				status);
+		return -1;
+	}
+}
+#else
+short rtl819xU_tx_cmd(struct net_device *dev, struct sk_buff *skb)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	//u8			*tx;
+	int			status;
+	struct urb		*tx_urb;
+	//int			urb_buf_len;
+	unsigned int 		idx_pipe;
+	tx_desc_cmd_819x_usb *pdesc = (tx_desc_cmd_819x_usb *)skb->data;
+	cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
+	u8 queue_index = tcb_desc->queue_index;
+
+	//printk("\n %s::queue_index = %d\n",__FUNCTION__, queue_index);
+	atomic_inc(&priv->tx_pending[queue_index]);
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	tx_urb = usb_alloc_urb(0,GFP_ATOMIC);
+#else
+	tx_urb = usb_alloc_urb(0);
+#endif
+	if(!tx_urb){
+		dev_kfree_skb(skb);
+		return -ENOMEM;
+	}
+
+	memset(pdesc, 0, USB_HWDESC_HEADER_LEN);
+	/* Tx descriptor ought to be set according to the skb->cb */
+	pdesc->FirstSeg = 1;//bFirstSeg;
+	pdesc->LastSeg = 1;//bLastSeg;
+	pdesc->CmdInit = tcb_desc->bCmdOrInit;
+	pdesc->TxBufferSize = tcb_desc->txbuf_size;
+	pdesc->OWN = 1;
+	pdesc->LINIP = tcb_desc->bLastIniPkt;
+
+	//----------------------------------------------------------------------------
+	// Fill up USB_OUT_CONTEXT.
+	//----------------------------------------------------------------------------
+	// Get index to out pipe from specified QueueID.
+#ifndef USE_ONE_PIPE
+	idx_pipe = txqueue2outpipe(priv,queue_index);
+#else
+	idx_pipe = 0x04;
+#endif
+#ifdef JOHN_DUMP_TXDESC
+	int i;
+	printk("<Tx descriptor>--rate %x---",rate);
+	for (i = 0; i < 8; i++)
+		printk("%8x ", tx[i]);
+	printk("\n");
+#endif
+	usb_fill_bulk_urb(tx_urb,priv->udev, usb_sndbulkpipe(priv->udev,idx_pipe), \
+			skb->data, skb->len, rtl8192_tx_isr, skb);
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	status = usb_submit_urb(tx_urb, GFP_ATOMIC);
+#else
+	status = usb_submit_urb(tx_urb);
+#endif
+
+	if (!status){
+		return 0;
+	}else{
+		DMESGE("Error TX CMD URB, error %d",
+				status);
+		return -1;
+	}
+}
+#endif
+
+/*
+ * Mapping Software/Hardware descriptor queue id to "Queue Select Field"
+ * in TxFwInfo data structure
+ * 2006.10.30 by Emily
+ *
+ * \param QUEUEID       Software Queue
+*/
+u8 MapHwQueueToFirmwareQueue(u8 QueueID)
+{
+	u8 QueueSelect = 0x0;       //defualt set to
+
+	switch(QueueID) {
+		case BE_QUEUE:
+			QueueSelect = QSLT_BE;  //or QSelect = pTcb->priority;
+			break;
+
+		case BK_QUEUE:
+			QueueSelect = QSLT_BK;  //or QSelect = pTcb->priority;
+			break;
+
+		case VO_QUEUE:
+			QueueSelect = QSLT_VO;  //or QSelect = pTcb->priority;
+			break;
+
+		case VI_QUEUE:
+			QueueSelect = QSLT_VI;  //or QSelect = pTcb->priority;
+			break;
+		case MGNT_QUEUE:
+			QueueSelect = QSLT_MGNT;
+			break;
+
+		case BEACON_QUEUE:
+			QueueSelect = QSLT_BEACON;
+			break;
+
+			// TODO: 2006.10.30 mark other queue selection until we verify it is OK
+			// TODO: Remove Assertions
+//#if (RTL819X_FPGA_VER & RTL819X_FPGA_GUANGAN_070502)
+		case TXCMD_QUEUE:
+			QueueSelect = QSLT_CMD;
+			break;
+//#endif
+		case HIGH_QUEUE:
+			QueueSelect = QSLT_HIGH;
+			break;
+
+		default:
+			RT_TRACE(COMP_ERR, "TransmitTCB(): Impossible Queue Selection: %d \n", QueueID);
+			break;
+	}
+	return QueueSelect;
+}
+
+#ifdef RTL8192SU
+u8 MRateToHwRate8190Pci(u8 rate)
+{
+	u8	ret = DESC92S_RATE1M;
+
+	switch(rate)
+	{
+		// CCK and OFDM non-HT rates
+	case MGN_1M:		ret = DESC92S_RATE1M;	break;
+	case MGN_2M:		ret = DESC92S_RATE2M;	break;
+	case MGN_5_5M:		ret = DESC92S_RATE5_5M;	break;
+	case MGN_11M:		ret = DESC92S_RATE11M;	break;
+	case MGN_6M:		ret = DESC92S_RATE6M;	break;
+	case MGN_9M:		ret = DESC92S_RATE9M;	break;
+	case MGN_12M:		ret = DESC92S_RATE12M;	break;
+	case MGN_18M:		ret = DESC92S_RATE18M;	break;
+	case MGN_24M:		ret = DESC92S_RATE24M;	break;
+	case MGN_36M:		ret = DESC92S_RATE36M;	break;
+	case MGN_48M:		ret = DESC92S_RATE48M;	break;
+	case MGN_54M:		ret = DESC92S_RATE54M;	break;
+
+		// HT rates since here
+	case MGN_MCS0:		ret = DESC92S_RATEMCS0;	break;
+	case MGN_MCS1:		ret = DESC92S_RATEMCS1;	break;
+	case MGN_MCS2:		ret = DESC92S_RATEMCS2;	break;
+	case MGN_MCS3:		ret = DESC92S_RATEMCS3;	break;
+	case MGN_MCS4:		ret = DESC92S_RATEMCS4;	break;
+	case MGN_MCS5:		ret = DESC92S_RATEMCS5;	break;
+	case MGN_MCS6:		ret = DESC92S_RATEMCS6;	break;
+	case MGN_MCS7:		ret = DESC92S_RATEMCS7;	break;
+	case MGN_MCS8:		ret = DESC92S_RATEMCS8;	break;
+	case MGN_MCS9:		ret = DESC92S_RATEMCS9;	break;
+	case MGN_MCS10:	ret = DESC92S_RATEMCS10;	break;
+	case MGN_MCS11:	ret = DESC92S_RATEMCS11;	break;
+	case MGN_MCS12:	ret = DESC92S_RATEMCS12;	break;
+	case MGN_MCS13:	ret = DESC92S_RATEMCS13;	break;
+	case MGN_MCS14:	ret = DESC92S_RATEMCS14;	break;
+	case MGN_MCS15:	ret = DESC92S_RATEMCS15;	break;
+
+	// Set the highest SG rate
+	case MGN_MCS0_SG:
+	case MGN_MCS1_SG:
+	case MGN_MCS2_SG:
+	case MGN_MCS3_SG:
+	case MGN_MCS4_SG:
+	case MGN_MCS5_SG:
+	case MGN_MCS6_SG:
+	case MGN_MCS7_SG:
+	case MGN_MCS8_SG:
+	case MGN_MCS9_SG:
+	case MGN_MCS10_SG:
+	case MGN_MCS11_SG:
+	case MGN_MCS12_SG:
+	case MGN_MCS13_SG:
+	case MGN_MCS14_SG:
+	case MGN_MCS15_SG:
+	{
+		ret = DESC92S_RATEMCS15_SG;
+		break;
+	}
+
+	default:		break;
+	}
+	return ret;
+}
+#else
+u8 MRateToHwRate8190Pci(u8 rate)
+{
+	u8  ret = DESC90_RATE1M;
+
+	switch(rate) {
+		case MGN_1M:    ret = DESC90_RATE1M;    break;
+		case MGN_2M:    ret = DESC90_RATE2M;    break;
+		case MGN_5_5M:  ret = DESC90_RATE5_5M;  break;
+		case MGN_11M:   ret = DESC90_RATE11M;   break;
+		case MGN_6M:    ret = DESC90_RATE6M;    break;
+		case MGN_9M:    ret = DESC90_RATE9M;    break;
+		case MGN_12M:   ret = DESC90_RATE12M;   break;
+		case MGN_18M:   ret = DESC90_RATE18M;   break;
+		case MGN_24M:   ret = DESC90_RATE24M;   break;
+		case MGN_36M:   ret = DESC90_RATE36M;   break;
+		case MGN_48M:   ret = DESC90_RATE48M;   break;
+		case MGN_54M:   ret = DESC90_RATE54M;   break;
+
+		// HT rate since here
+		case MGN_MCS0:  ret = DESC90_RATEMCS0;  break;
+		case MGN_MCS1:  ret = DESC90_RATEMCS1;  break;
+		case MGN_MCS2:  ret = DESC90_RATEMCS2;  break;
+		case MGN_MCS3:  ret = DESC90_RATEMCS3;  break;
+		case MGN_MCS4:  ret = DESC90_RATEMCS4;  break;
+		case MGN_MCS5:  ret = DESC90_RATEMCS5;  break;
+		case MGN_MCS6:  ret = DESC90_RATEMCS6;  break;
+		case MGN_MCS7:  ret = DESC90_RATEMCS7;  break;
+		case MGN_MCS8:  ret = DESC90_RATEMCS8;  break;
+		case MGN_MCS9:  ret = DESC90_RATEMCS9;  break;
+		case MGN_MCS10: ret = DESC90_RATEMCS10; break;
+		case MGN_MCS11: ret = DESC90_RATEMCS11; break;
+		case MGN_MCS12: ret = DESC90_RATEMCS12; break;
+		case MGN_MCS13: ret = DESC90_RATEMCS13; break;
+		case MGN_MCS14: ret = DESC90_RATEMCS14; break;
+		case MGN_MCS15: ret = DESC90_RATEMCS15; break;
+		case (0x80|0x20): ret = DESC90_RATEMCS32; break;
+
+		default:       break;
+	}
+	return ret;
+}
+#endif
+
+u8 QueryIsShort(u8 TxHT, u8 TxRate, cb_desc *tcb_desc)
+{
+	u8   tmp_Short;
+
+	tmp_Short = (TxHT==1)?((tcb_desc->bUseShortGI)?1:0):((tcb_desc->bUseShortPreamble)?1:0);
+
+	if(TxHT==1 && TxRate != DESC90_RATEMCS15)
+		tmp_Short = 0;
+
+	return tmp_Short;
+}
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
+static void tx_zero_isr(struct urb *tx_urb, struct pt_regs *reg)
+#else
+static void tx_zero_isr(struct urb *tx_urb)
+#endif
+{
+	return;
+}
+
+
+#ifdef RTL8192SU
+/*
+ * The tx procedure is just as following,  skb->cb will contain all the following
+ *information: * priority, morefrag, rate, &dev.
+ * */
+ //	<Note> Buffer format for 8192S Usb bulk out:
+//
+//  --------------------------------------------------
+//  | 8192S Usb Tx Desc | 802_11_MAC_header |    data          |
+//  --------------------------------------------------
+//  |  32 bytes           	  |       24 bytes             |0-2318 bytes|
+//  --------------------------------------------------
+//  |<------------ BufferLen ------------------------->|
+
+short rtl8192SU_tx(struct net_device *dev, struct sk_buff* skb)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
+	tx_desc_819x_usb *tx_desc = (tx_desc_819x_usb *)skb->data;
+	//tx_fwinfo_819x_usb *tx_fwinfo = (tx_fwinfo_819x_usb *)(skb->data + USB_HWDESC_HEADER_LEN);//92su del
+	struct usb_device *udev = priv->udev;
+	int pend;
+	int status;
+	struct urb *tx_urb = NULL, *tx_urb_zero = NULL;
+	//int urb_len;
+	unsigned int idx_pipe;
+	u16		MPDUOverhead = 0;
+ 	//RT_DEBUG_DATA(COMP_SEND, tcb_desc, sizeof(cb_desc));
+
+#if 0
+	/* Added by Annie for filling Len_Adjust field. 2005-12-14. */
+        RT_ENC_ALG  EncAlg = NO_Encryption;
+#endif
+
+
+	pend = atomic_read(&priv->tx_pending[tcb_desc->queue_index]);
+	/* we are locked here so the two atomic_read and inc are executed
+	 * without interleaves  * !!! For debug purpose 	  */
+	if( pend > MAX_TX_URB){
+		switch (tcb_desc->queue_index) {
+			case VO_PRIORITY:
+				priv->stats.txvodrop++;
+				break;
+			case VI_PRIORITY:
+				priv->stats.txvidrop++;
+				break;
+			case BE_PRIORITY:
+				priv->stats.txbedrop++;
+				break;
+			default://BK_PRIORITY
+				priv->stats.txbkdrop++;
+				break;
+		}
+		printk("To discard skb packet!\n");
+		dev_kfree_skb_any(skb);
+		return -1;
+	}
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	tx_urb = usb_alloc_urb(0,GFP_ATOMIC);
+#else
+	tx_urb = usb_alloc_urb(0);
+#endif
+	if(!tx_urb){
+		dev_kfree_skb_any(skb);
+		return -ENOMEM;
+	}
+
+	memset(tx_desc, 0, sizeof(tx_desc_819x_usb));
+
+
+#if RTL8192SU_FPGA_UNSPECIFIED_NETWORK
+		if(IsQoSDataFrame(skb->data))
+		{
+			tcb_desc->bAMPDUEnable = TRUE;
+			tx_desc->NonQos = 0;
+		}
+		else
+			tcb_desc->bAMPDUEnable = FALSE;
+
+		tcb_desc->bPacketBW = TRUE;
+		priv->CurrentChannelBW = HT_CHANNEL_WIDTH_20_40;
+#endif
+
+#if (defined (RTL8192SU_FPGA_2MAC_VERIFICATION)||defined (RTL8192SU_ASIC_VERIFICATION))
+		tx_desc->NonQos = (IsQoSDataFrame(skb->data)==TRUE)? 0:1;
+#endif
+
+	/* Fill Tx descriptor */
+	//memset(tx_fwinfo,0,sizeof(tx_fwinfo_819x_usb));
+
+	// This part can just fill to the first descriptor of the frame.
+	/* DWORD 0 */
+	tx_desc->TxHT = (tcb_desc->data_rate&0x80)?1:0;
+
+#ifdef RTL8192SU_DISABLE_CCK_RATE
+		if(tx_hal_is_cck_rate(tcb_desc->data_rate))
+			tcb_desc->data_rate = MGN_6M;
+#endif
+
+	tx_desc->TxRate = MRateToHwRate8190Pci(tcb_desc->data_rate);
+	//tx_desc->EnableCPUDur = tcb_desc->bTxEnableFwCalcDur;
+	tx_desc->TxShort = QueryIsShort(tx_desc->TxHT, tx_desc->TxRate, tcb_desc);
+
+
+	// Aggregation related
+	if(tcb_desc->bAMPDUEnable) {//AMPDU enabled
+		tx_desc->AllowAggregation = 1;
+		/* DWORD 1 */
+		//tx_fwinfo->RxMF = tcb_desc->ampdu_factor;
+		//tx_fwinfo->RxAMD = tcb_desc->ampdu_density&0x07;//ampdudensity
+	} else {
+		tx_desc->AllowAggregation = 0;
+		/* DWORD 1 */
+		//tx_fwinfo->RxMF = 0;
+		//tx_fwinfo->RxAMD = 0;
+	}
+
+	//
+	// <Roger_Notes> For AMPDU case, we must insert SSN into TX_DESC,
+	// FW according as this SSN to do necessary packet retry.
+	// 2008.06.06.
+	//
+	{
+		u8	*pSeq;
+		u16	Temp;
+		//pSeq = (u8 *)(VirtualAddress+USB_HWDESC_HEADER_LEN + FRAME_OFFSET_SEQUENCE);
+		pSeq = (u8 *)(skb->data+USB_HWDESC_HEADER_LEN + 22);
+		Temp = pSeq[0];
+		Temp <<= 12;
+		Temp |= (*(u16 *)pSeq)>>4;
+		tx_desc->Seq = Temp;
+	}
+
+	/* Protection mode related */
+	tx_desc->RTSEn = (tcb_desc->bRTSEnable)?1:0;
+	tx_desc->CTS2Self = (tcb_desc->bCTSEnable)?1:0;
+	tx_desc->RTSSTBC = (tcb_desc->bRTSSTBC)?1:0;
+	tx_desc->RTSHT = (tcb_desc->rts_rate&0x80)?1:0;
+	tx_desc->RTSRate =  MRateToHwRate8190Pci((u8)tcb_desc->rts_rate);
+	tx_desc->RTSSubcarrier = (tx_desc->RTSHT==0)?(tcb_desc->RTSSC):0;
+	tx_desc->RTSBW = (tx_desc->RTSHT==1)?((tcb_desc->bRTSBW)?1:0):0;
+	tx_desc->RTSShort = (tx_desc->RTSHT==0)?(tcb_desc->bRTSUseShortPreamble?1:0):\
+				(tcb_desc->bRTSUseShortGI?1:0);
+	//LZM 090219
+	tx_desc->DisRTSFB = 0;
+	tx_desc->RTSRateFBLmt = 0xf;
+
+	// <Roger_EXP> 2008.09.22. We disable RTS rate fallback temporarily.
+	//tx_desc->DisRTSFB = 0x01;
+
+	/* Set Bandwidth and sub-channel settings. */
+	if(priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40)
+	{
+		if(tcb_desc->bPacketBW) {
+			tx_desc->TxBandwidth = 1;
+			tx_desc->TxSubCarrier = 0;    //By SD3's Jerry suggestion, use duplicated mode
+		} else {
+			tx_desc->TxBandwidth = 0;
+			tx_desc->TxSubCarrier = priv->nCur40MhzPrimeSC;
+		}
+	} else {
+		tx_desc->TxBandwidth = 0;
+		tx_desc->TxSubCarrier = 0;
+	}
+
+#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
+	if (tcb_desc->drv_agg_enable)
+	{
+		//tx_desc->Tx_INFO_RSVD = (tcb_desc->DrvAggrNum & 0x1f) << 1; //92su del
+	}
+#endif
+
+	//memset(tx_desc, 0, sizeof(tx_desc_819x_usb));
+	/* DWORD 0 */
+        tx_desc->LINIP = 0;
+        //tx_desc->CmdInit = 1; //92su del
+        tx_desc->Offset =  USB_HWDESC_HEADER_LEN;
+
+#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
+	if (tcb_desc->drv_agg_enable) {
+		tx_desc->PktSize = tcb_desc->pkt_size;//FIXLZM
+	} else
+#endif
+	{
+		tx_desc->PktSize = (skb->len - USB_HWDESC_HEADER_LEN) & 0xffff;
+	}
+
+	/*DWORD 1*/
+	//tx_desc->SecCAMID= 0;//92su del
+	tx_desc->RaBRSRID= tcb_desc->RATRIndex;
+//#ifdef RTL8192S_PREPARE_FOR_NORMAL_RELEASE
+#if 0//LZM 090219
+	tx_desc->RaBRSRID= 1;
+#endif
+
+#if 0
+	/* Fill security related */
+	if( pTcb->bEncrypt && !Adapter->MgntInfo.SecurityInfo.SWTxEncryptFlag)
+	{
+		EncAlg = SecGetEncryptionOverhead(
+				Adapter,
+				&EncryptionMPDUHeadOverhead,
+				&EncryptionMPDUTailOverhead,
+				NULL,
+				NULL,
+				FALSE,
+				FALSE);
+		//2004/07/22, kcwu, EncryptionMPDUHeadOverhead has been added in previous code
+		//MPDUOverhead = EncryptionMPDUHeadOverhead + EncryptionMPDUTailOverhead;
+		MPDUOverhead = EncryptionMPDUTailOverhead;
+		tx_desc->NoEnc = 0;
+		RT_TRACE(COMP_SEC, DBG_LOUD, ("******We in the loop SecCAMID is %d SecDescAssign is %d The Sec is %d********\n",tx_desc->SecCAMID,tx_desc->SecDescAssign,EncAlg));
+		//CamDumpAll(Adapter);
+	}
+	else
+#endif
+	{
+		MPDUOverhead = 0;
+		//tx_desc->NoEnc = 1;//92su del
+	}
+#if 0
+	switch(EncAlg){
+		case NO_Encryption:
+			tx_desc->SecType = 0x0;
+			break;
+		case WEP40_Encryption:
+		case WEP104_Encryption:
+			tx_desc->SecType = 0x1;
+			break;
+		case TKIP_Encryption:
+			tx_desc->SecType = 0x2;
+			break;
+		case AESCCMP_Encryption:
+			tx_desc->SecType = 0x3;
+			break;
+		default:
+			tx_desc->SecType = 0x0;
+			break;
+	}
+#else
+	tx_desc->SecType = 0x0;
+#endif
+		if (tcb_desc->bHwSec)
+			{
+				switch (priv->ieee80211->pairwise_key_type)
+				{
+					case KEY_TYPE_WEP40:
+					case KEY_TYPE_WEP104:
+						 tx_desc->SecType = 0x1;
+						 //tx_desc->NoEnc = 0;//92su del
+						 break;
+					case KEY_TYPE_TKIP:
+						 tx_desc->SecType = 0x2;
+						 //tx_desc->NoEnc = 0;//92su del
+						 break;
+					case KEY_TYPE_CCMP:
+						 tx_desc->SecType = 0x3;
+						 //tx_desc->NoEnc = 0;//92su del
+						 break;
+					case KEY_TYPE_NA:
+						 tx_desc->SecType = 0x0;
+						 //tx_desc->NoEnc = 1;//92su del
+						 break;
+					default:
+						 tx_desc->SecType = 0x0;
+						 //tx_desc->NoEnc = 1;//92su del
+						 break;
+				}
+			}
+
+	//tx_desc->TxFWInfoSize =  sizeof(tx_fwinfo_819x_usb);//92su del
+
+
+	tx_desc->USERATE = tcb_desc->bTxUseDriverAssingedRate;
+	tx_desc->DISFB = tcb_desc->bTxDisableRateFallBack;
+	tx_desc->DataRateFBLmt = 0x1F;// Alwasy enable all rate fallback range
+
+	tx_desc->QueueSelect = MapHwQueueToFirmwareQueue(tcb_desc->queue_index);
+
+
+        /* Fill fields that are required to be initialized in all of the descriptors */
+        //DWORD 0
+#if 0
+        tx_desc->FirstSeg = (tcb_desc->bFirstSeg)? 1:0;
+        tx_desc->LastSeg = (tcb_desc->bLastSeg)?1:0;
+#else
+        tx_desc->FirstSeg = 1;
+        tx_desc->LastSeg = 1;
+#endif
+        tx_desc->OWN = 1;
+
+#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
+	if (tcb_desc->drv_agg_enable) {
+		tx_desc->TxBufferSize = tcb_desc->pkt_size + sizeof(tx_fwinfo_819x_usb);
+	} else
+#endif
+	{
+		//DWORD 2
+		//tx_desc->TxBufferSize = (u32)(skb->len - USB_HWDESC_HEADER_LEN);
+		tx_desc->TxBufferSize = (u32)(skb->len);//92su mod FIXLZM
+	}
+
+#if 0
+	RT_TRACE(COMP_FPGA, DBG_LOUD, ("(1)TxFillDescriptor8192SUsb(): DataRate(%#x)\n", pTcb->DataRate));
+	RT_TRACE(COMP_FPGA, DBG_LOUD, ("(2)TxFillDescriptor8192SUsb(): bTxUseDriverAssingedRate(%#x)\n", pTcb->bTxUseDriverAssingedRate));
+	RT_TRACE(COMP_FPGA, DBG_LOUD, ("(3)TxFillDescriptor8192SUsb(): bAMPDUEnable(%d)\n", pTcb->bAMPDUEnable));
+	RT_TRACE(COMP_FPGA, DBG_LOUD, ("(4)TxFillDescriptor8192SUsb(): bRTSEnable(%d)\n", pTcb->bRTSEnable));
+	RT_TRACE(COMP_FPGA, DBG_LOUD, ("(5)TxFillDescriptor8192SUsb(): RTSRate(%#x)\n", pTcb->RTSRate));
+	RT_TRACE(COMP_FPGA, DBG_LOUD, ("(6)TxFillDescriptor8192SUsb(): bCTSEnable(%d)\n", pTcb->bCTSEnable));
+	RT_TRACE(COMP_FPGA, DBG_LOUD, ("(7)TxFillDescriptor8192SUsb(): bUseShortGI(%d)\n", pTcb->bUseShortGI));
+	RT_TRACE(COMP_FPGA, DBG_LOUD, ("(8)TxFillDescriptor8192SUsb(): bPacketBW(%d)\n", pTcb->bPacketBW));
+	RT_TRACE(COMP_FPGA, DBG_LOUD, ("(9)TxFillDescriptor8192SUsb(): CurrentChannelBW(%d)\n", pHalData->CurrentChannelBW));
+	RT_TRACE(COMP_FPGA, DBG_LOUD, ("(10)TxFillDescriptor8192SUsb(): bTxDisableRateFallBack(%d)\n", pTcb->bTxDisableRateFallBack));
+	RT_TRACE(COMP_FPGA, DBG_LOUD, ("(11)TxFillDescriptor8192SUsb(): RATRIndex(%d)\n", pTcb->RATRIndex));
+#endif
+
+	/* Get index to out pipe from specified QueueID */
+	idx_pipe = txqueue2outpipe(priv,tcb_desc->queue_index);
+	//printk("=============>%s queue_index:%d, outpipe:%d\n", __func__,tcb_desc->queue_index,priv->RtOutPipes[idx_pipe]);
+
+	//RT_DEBUG_DATA(COMP_SEND,tx_fwinfo,sizeof(tx_fwinfo_819x_usb));
+	//RT_DEBUG_DATA(COMP_SEND,tx_desc,sizeof(tx_desc_819x_usb));
+
+	/* To submit bulk urb */
+	usb_fill_bulk_urb(tx_urb,
+				    udev,
+				    usb_sndbulkpipe(udev,priv->RtOutPipes[idx_pipe]),
+				    skb->data,
+				    skb->len, rtl8192_tx_isr, skb);
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	status = usb_submit_urb(tx_urb, GFP_ATOMIC);
+#else
+	status = usb_submit_urb(tx_urb);
+#endif
+	if (!status){
+//we need to send 0 byte packet whenever 512N bytes/64N(HIGN SPEED/NORMAL SPEED) bytes packet has been transmitted. Otherwise, it will be halt to wait for another packet. WB. 2008.08.27
+		bool bSend0Byte = false;
+		u8 zero = 0;
+		if(udev->speed == USB_SPEED_HIGH)
+		{
+			if (skb->len > 0 && skb->len % 512 == 0)
+				bSend0Byte = true;
+		}
+		else
+		{
+			if (skb->len > 0 && skb->len % 64 == 0)
+				bSend0Byte = true;
+		}
+		if (bSend0Byte)
+		{
+#if 1
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+			tx_urb_zero = usb_alloc_urb(0,GFP_ATOMIC);
+#else
+			tx_urb_zero = usb_alloc_urb(0);
+#endif
+			if(!tx_urb_zero){
+				RT_TRACE(COMP_ERR, "can't alloc urb for zero byte\n");
+				return -ENOMEM;
+			}
+			usb_fill_bulk_urb(tx_urb_zero,udev,
+					usb_sndbulkpipe(udev,idx_pipe), &zero,
+					0, tx_zero_isr, dev);
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+			status = usb_submit_urb(tx_urb_zero, GFP_ATOMIC);
+#else
+			status = usb_submit_urb(tx_urb_zero);
+#endif
+			if (status){
+			RT_TRACE(COMP_ERR, "Error TX URB for zero byte %d, error %d", atomic_read(&priv->tx_pending[tcb_desc->queue_index]), status);
+			return -1;
+			}
+#endif
+		}
+		dev->trans_start = jiffies;
+		atomic_inc(&priv->tx_pending[tcb_desc->queue_index]);
+		return 0;
+	}else{
+		RT_TRACE(COMP_ERR, "Error TX URB %d, error %d", atomic_read(&priv->tx_pending[tcb_desc->queue_index]),
+				status);
+		return -1;
+	}
+}
+#else
+
+/*
+ * The tx procedure is just as following,
+ * skb->cb will contain all the following information,
+ * priority, morefrag, rate, &dev.
+ * */
+short rtl8192_tx(struct net_device *dev, struct sk_buff* skb)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
+	tx_desc_819x_usb *tx_desc = (tx_desc_819x_usb *)skb->data;
+	tx_fwinfo_819x_usb *tx_fwinfo = (tx_fwinfo_819x_usb *)(skb->data + USB_HWDESC_HEADER_LEN);
+	struct usb_device *udev = priv->udev;
+	int pend;
+	int status;
+	struct urb *tx_urb = NULL, *tx_urb_zero = NULL;
+	//int urb_len;
+	unsigned int idx_pipe;
+//	RT_DEBUG_DATA(COMP_SEND, tcb_desc, sizeof(cb_desc));
+#if 0
+	/* Added by Annie for filling Len_Adjust field. 2005-12-14. */
+        RT_ENC_ALG  EncAlg = NO_Encryption;
+#endif
+//	printk("=============> %s\n", __FUNCTION__);
+	pend = atomic_read(&priv->tx_pending[tcb_desc->queue_index]);
+	/* we are locked here so the two atomic_read and inc are executed
+	 * without interleaves
+	 * !!! For debug purpose
+	 */
+	if( pend > MAX_TX_URB){
+#if 0
+		switch (tcb_desc->queue_index) {
+			case VO_PRIORITY:
+				priv->stats.txvodrop++;
+				break;
+			case VI_PRIORITY:
+				priv->stats.txvidrop++;
+				break;
+			case BE_PRIORITY:
+				priv->stats.txbedrop++;
+				break;
+			default://BK_PRIORITY
+				priv->stats.txbkdrop++;
+				break;
+		}
+#endif
+		printk("To discard skb packet!\n");
+		dev_kfree_skb_any(skb);
+		return -1;
+	}
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	tx_urb = usb_alloc_urb(0,GFP_ATOMIC);
+#else
+	tx_urb = usb_alloc_urb(0);
+#endif
+	if(!tx_urb){
+		dev_kfree_skb_any(skb);
+		return -ENOMEM;
+	}
+
+	/* Fill Tx firmware info */
+	memset(tx_fwinfo,0,sizeof(tx_fwinfo_819x_usb));
+	/* DWORD 0 */
+	tx_fwinfo->TxHT = (tcb_desc->data_rate&0x80)?1:0;
+	tx_fwinfo->TxRate = MRateToHwRate8190Pci(tcb_desc->data_rate);
+	tx_fwinfo->EnableCPUDur = tcb_desc->bTxEnableFwCalcDur;
+	tx_fwinfo->Short = QueryIsShort(tx_fwinfo->TxHT, tx_fwinfo->TxRate, tcb_desc);
+	if(tcb_desc->bAMPDUEnable) {//AMPDU enabled
+		tx_fwinfo->AllowAggregation = 1;
+		/* DWORD 1 */
+		tx_fwinfo->RxMF = tcb_desc->ampdu_factor;
+		tx_fwinfo->RxAMD = tcb_desc->ampdu_density&0x07;//ampdudensity
+	} else {
+		tx_fwinfo->AllowAggregation = 0;
+		/* DWORD 1 */
+		tx_fwinfo->RxMF = 0;
+		tx_fwinfo->RxAMD = 0;
+	}
+
+	/* Protection mode related */
+	tx_fwinfo->RtsEnable = (tcb_desc->bRTSEnable)?1:0;
+	tx_fwinfo->CtsEnable = (tcb_desc->bCTSEnable)?1:0;
+	tx_fwinfo->RtsSTBC = (tcb_desc->bRTSSTBC)?1:0;
+	tx_fwinfo->RtsHT = (tcb_desc->rts_rate&0x80)?1:0;
+	tx_fwinfo->RtsRate =  MRateToHwRate8190Pci((u8)tcb_desc->rts_rate);
+	tx_fwinfo->RtsSubcarrier = (tx_fwinfo->RtsHT==0)?(tcb_desc->RTSSC):0;
+	tx_fwinfo->RtsBandwidth = (tx_fwinfo->RtsHT==1)?((tcb_desc->bRTSBW)?1:0):0;
+	tx_fwinfo->RtsShort = (tx_fwinfo->RtsHT==0)?(tcb_desc->bRTSUseShortPreamble?1:0):\
+				(tcb_desc->bRTSUseShortGI?1:0);
+
+	/* Set Bandwidth and sub-channel settings. */
+	if(priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40)
+	{
+		if(tcb_desc->bPacketBW) {
+			tx_fwinfo->TxBandwidth = 1;
+			tx_fwinfo->TxSubCarrier = 0;    //By SD3's Jerry suggestion, use duplicated mode
+		} else {
+			tx_fwinfo->TxBandwidth = 0;
+			tx_fwinfo->TxSubCarrier = priv->nCur40MhzPrimeSC;
+		}
+	} else {
+		tx_fwinfo->TxBandwidth = 0;
+		tx_fwinfo->TxSubCarrier = 0;
+	}
+
+#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
+	if (tcb_desc->drv_agg_enable)
+	{
+		tx_fwinfo->Tx_INFO_RSVD = (tcb_desc->DrvAggrNum & 0x1f) << 1;
+	}
+#endif
+	/* Fill Tx descriptor */
+	memset(tx_desc, 0, sizeof(tx_desc_819x_usb));
+	/* DWORD 0 */
+        tx_desc->LINIP = 0;
+        tx_desc->CmdInit = 1;
+        tx_desc->Offset =  sizeof(tx_fwinfo_819x_usb) + 8;
+
+#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
+	if (tcb_desc->drv_agg_enable) {
+		tx_desc->PktSize = tcb_desc->pkt_size;
+	} else
+#endif
+	{
+		tx_desc->PktSize = (skb->len - TX_PACKET_SHIFT_BYTES) & 0xffff;
+	}
+
+	/*DWORD 1*/
+	tx_desc->SecCAMID= 0;
+	tx_desc->RATid = tcb_desc->RATRIndex;
+#if 0
+	/* Fill security related */
+	if( pTcb->bEncrypt && !Adapter->MgntInfo.SecurityInfo.SWTxEncryptFlag)
+	{
+		EncAlg = SecGetEncryptionOverhead(
+				Adapter,
+				&EncryptionMPDUHeadOverhead,
+				&EncryptionMPDUTailOverhead,
+				NULL,
+				NULL,
+				FALSE,
+				FALSE);
+		//2004/07/22, kcwu, EncryptionMPDUHeadOverhead has been added in previous code
+		//MPDUOverhead = EncryptionMPDUHeadOverhead + EncryptionMPDUTailOverhead;
+		MPDUOverhead = EncryptionMPDUTailOverhead;
+		tx_desc->NoEnc = 0;
+		RT_TRACE(COMP_SEC, DBG_LOUD, ("******We in the loop SecCAMID is %d SecDescAssign is %d The Sec is %d********\n",tx_desc->SecCAMID,tx_desc->SecDescAssign,EncAlg));
+		//CamDumpAll(Adapter);
+	}
+	else
+#endif
+	{
+		//MPDUOverhead = 0;
+		tx_desc->NoEnc = 1;
+	}
+#if 0
+	switch(EncAlg){
+		case NO_Encryption:
+			tx_desc->SecType = 0x0;
+			break;
+		case WEP40_Encryption:
+		case WEP104_Encryption:
+			tx_desc->SecType = 0x1;
+			break;
+		case TKIP_Encryption:
+			tx_desc->SecType = 0x2;
+			break;
+		case AESCCMP_Encryption:
+			tx_desc->SecType = 0x3;
+			break;
+		default:
+			tx_desc->SecType = 0x0;
+			break;
+	}
+#else
+	tx_desc->SecType = 0x0;
+#endif
+		if (tcb_desc->bHwSec)
+			{
+				switch (priv->ieee80211->pairwise_key_type)
+				{
+					case KEY_TYPE_WEP40:
+					case KEY_TYPE_WEP104:
+						 tx_desc->SecType = 0x1;
+						 tx_desc->NoEnc = 0;
+						 break;
+					case KEY_TYPE_TKIP:
+						 tx_desc->SecType = 0x2;
+						 tx_desc->NoEnc = 0;
+						 break;
+					case KEY_TYPE_CCMP:
+						 tx_desc->SecType = 0x3;
+						 tx_desc->NoEnc = 0;
+						 break;
+					case KEY_TYPE_NA:
+						 tx_desc->SecType = 0x0;
+						 tx_desc->NoEnc = 1;
+						 break;
+				}
+			}
+
+	tx_desc->QueueSelect = MapHwQueueToFirmwareQueue(tcb_desc->queue_index);
+	tx_desc->TxFWInfoSize =  sizeof(tx_fwinfo_819x_usb);
+
+	tx_desc->DISFB = tcb_desc->bTxDisableRateFallBack;
+	tx_desc->USERATE = tcb_desc->bTxUseDriverAssingedRate;
+
+        /* Fill fields that are required to be initialized in all of the descriptors */
+        //DWORD 0
+#if 0
+        tx_desc->FirstSeg = (tcb_desc->bFirstSeg)? 1:0;
+        tx_desc->LastSeg = (tcb_desc->bLastSeg)?1:0;
+#else
+        tx_desc->FirstSeg = 1;
+        tx_desc->LastSeg = 1;
+#endif
+        tx_desc->OWN = 1;
+
+#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
+	if (tcb_desc->drv_agg_enable) {
+		tx_desc->TxBufferSize = tcb_desc->pkt_size + sizeof(tx_fwinfo_819x_usb);
+	} else
+#endif
+	{
+		//DWORD 2
+		tx_desc->TxBufferSize = (u32)(skb->len - USB_HWDESC_HEADER_LEN);
+	}
+	/* Get index to out pipe from specified QueueID */
+#ifndef USE_ONE_PIPE
+	idx_pipe = txqueue2outpipe(priv,tcb_desc->queue_index);
+#else
+	idx_pipe = 0x5;
+#endif
+
+	//RT_DEBUG_DATA(COMP_SEND,tx_fwinfo,sizeof(tx_fwinfo_819x_usb));
+	//RT_DEBUG_DATA(COMP_SEND,tx_desc,sizeof(tx_desc_819x_usb));
+
+	/* To submit bulk urb */
+	usb_fill_bulk_urb(tx_urb,udev,
+			usb_sndbulkpipe(udev,idx_pipe), skb->data,
+			skb->len, rtl8192_tx_isr, skb);
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	status = usb_submit_urb(tx_urb, GFP_ATOMIC);
+#else
+	status = usb_submit_urb(tx_urb);
+#endif
+	if (!status){
+//we need to send 0 byte packet whenever 512N bytes/64N(HIGN SPEED/NORMAL SPEED) bytes packet has been transmitted. Otherwise, it will be halt to wait for another packet. WB. 2008.08.27
+		bool bSend0Byte = false;
+		u8 zero = 0;
+		if(udev->speed == USB_SPEED_HIGH)
+		{
+			if (skb->len > 0 && skb->len % 512 == 0)
+				bSend0Byte = true;
+		}
+		else
+		{
+			if (skb->len > 0 && skb->len % 64 == 0)
+				bSend0Byte = true;
+		}
+		if (bSend0Byte)
+		{
+#if 1
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+			tx_urb_zero = usb_alloc_urb(0,GFP_ATOMIC);
+#else
+			tx_urb_zero = usb_alloc_urb(0);
+#endif
+			if(!tx_urb_zero){
+				RT_TRACE(COMP_ERR, "can't alloc urb for zero byte\n");
+				return -ENOMEM;
+			}
+			usb_fill_bulk_urb(tx_urb_zero,udev,
+					usb_sndbulkpipe(udev,idx_pipe), &zero,
+					0, tx_zero_isr, dev);
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+			status = usb_submit_urb(tx_urb_zero, GFP_ATOMIC);
+#else
+			status = usb_submit_urb(tx_urb_zero);
+#endif
+			if (status){
+			RT_TRACE(COMP_ERR, "Error TX URB for zero byte %d, error %d", atomic_read(&priv->tx_pending[tcb_desc->queue_index]), status);
+			return -1;
+			}
+#endif
+		}
+		dev->trans_start = jiffies;
+		atomic_inc(&priv->tx_pending[tcb_desc->queue_index]);
+		return 0;
+	}else{
+		RT_TRACE(COMP_ERR, "Error TX URB %d, error %d", atomic_read(&priv->tx_pending[tcb_desc->queue_index]),
+				status);
+		return -1;
+	}
+}
+#endif
+
+#if 0
+void rtl8192_set_rate(struct net_device *dev)
+{
+	int i;
+	u16 word;
+	int basic_rate,min_rr_rate,max_rr_rate;
+
+//	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	//if (ieee80211_is_54g(priv->ieee80211->current_network) &&
+//		priv->ieee80211->state == IEEE80211_LINKED){
+	basic_rate = ieeerate2rtlrate(240);
+	min_rr_rate = ieeerate2rtlrate(60);
+	max_rr_rate = ieeerate2rtlrate(240);
+
+//
+//	}else{
+//		basic_rate = ieeerate2rtlrate(20);
+//		min_rr_rate = ieeerate2rtlrate(10);
+//		max_rr_rate = ieeerate2rtlrate(110);
+//	}
+
+	write_nic_byte(dev, RESP_RATE,
+			max_rr_rate<<MAX_RESP_RATE_SHIFT| min_rr_rate<<MIN_RESP_RATE_SHIFT);
+
+	//word  = read_nic_word(dev, BRSR);
+	word  = read_nic_word(dev, BRSR_8187);
+	word &= ~BRSR_MBR_8185;
+
+
+	for(i=0;i<=basic_rate;i++)
+		word |= (1<<i);
+
+	//write_nic_word(dev, BRSR, word);
+	write_nic_word(dev, BRSR_8187, word);
+	//DMESG("RR:%x BRSR: %x", read_nic_byte(dev,RESP_RATE), read_nic_word(dev,BRSR));
+}
+#endif
+
+
+#ifdef RTL8192SU
+void rtl8192SU_net_update(struct net_device *dev)
+{
+
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	struct ieee80211_device* ieee = priv->ieee80211;
+	struct ieee80211_network *net = &priv->ieee80211->current_network;
+	//u16 BcnTimeCfg = 0, BcnCW = 6, BcnIFS = 0xf;
+	u16 rate_config = 0;
+	u32 regTmp = 0;
+	u8 rateIndex = 0;
+	u8	retrylimit = 0x30;
+	u16 cap = net->capability;
+
+	priv->short_preamble = cap & WLAN_CAPABILITY_SHORT_PREAMBLE;
+
+//HW_VAR_BASIC_RATE
+	//update Basic rate: RR, BRSR
+	rtl8192_config_rate(dev, &rate_config);	//HalSetBrateCfg
+
+#ifdef RTL8192SU_DISABLE_CCK_RATE
+	priv->basic_rate = rate_config  = rate_config & 0x150; // Disable CCK 11M, 5.5M, 2M, and 1M rates.
+#else
+	priv->basic_rate = rate_config  = rate_config & 0x15f;
+#endif
+
+	// Set RRSR rate table.
+	write_nic_byte(dev, RRSR, rate_config&0xff);
+	write_nic_byte(dev, RRSR+1, (rate_config>>8)&0xff);
+
+	// Set RTS initial rate
+	while(rate_config > 0x1)
+	{
+		rate_config = (rate_config>> 1);
+		rateIndex++;
+	}
+	write_nic_byte(dev, INIRTSMCS_SEL, rateIndex);
+//HW_VAR_BASIC_RATE
+
+	//set ack preample
+	regTmp = (priv->nCur40MhzPrimeSC) << 5;
+	if (priv->short_preamble)
+		regTmp |= 0x80;
+	write_nic_byte(dev, RRSR+2, regTmp);
+
+	write_nic_dword(dev,BSSIDR,((u32*)net->bssid)[0]);
+	write_nic_word(dev,BSSIDR+4,((u16*)net->bssid)[2]);
+
+	write_nic_word(dev, BCN_INTERVAL, net->beacon_interval);
+	//2008.10.24 added by tynli for beacon changed.
+	PHY_SetBeaconHwReg( dev, net->beacon_interval);
+
+	rtl8192_update_cap(dev, cap);
+
+	if (ieee->iw_mode == IW_MODE_ADHOC){
+		retrylimit = 7;
+		//we should enable ibss interrupt here, but disable it temporarily
+		if (0){
+			priv->irq_mask |= (IMR_BcnInt | IMR_BcnInt | IMR_TBDOK | IMR_TBDER);
+			//rtl8192_irq_disable(dev);
+			//rtl8192_irq_enable(dev);
+		}
+	}
+	else{
+		if (0){
+			priv->irq_mask &= ~(IMR_BcnInt | IMR_BcnInt | IMR_TBDOK | IMR_TBDER);
+			//rtl8192_irq_disable(dev);
+			//rtl8192_irq_enable(dev);
+		}
+	}
+
+	priv->ShortRetryLimit = priv->LongRetryLimit = retrylimit;
+
+	write_nic_word(dev, 	RETRY_LIMIT,
+				retrylimit << RETRY_LIMIT_SHORT_SHIFT | \
+				retrylimit << RETRY_LIMIT_LONG_SHIFT);
+}
+
+void rtl8192SU_update_ratr_table(struct net_device* dev)
+{
+		struct r8192_priv* priv = ieee80211_priv(dev);
+	struct ieee80211_device* ieee = priv->ieee80211;
+	u8* pMcsRate = ieee->dot11HTOperationalRateSet;
+	//struct ieee80211_network *net = &ieee->current_network;
+	u32 ratr_value = 0;
+
+	u8 rate_index = 0;
+	int WirelessMode = ieee->mode;
+	u8 MimoPs = ieee->pHTInfo->PeerMimoPs;
+
+	u8 bNMode = 0;
+
+	rtl8192_config_rate(dev, (u16*)(&ratr_value));
+	ratr_value |= (*(u16*)(pMcsRate)) << 12;
+
+	//switch (ieee->mode)
+	switch (WirelessMode)
+	{
+		case IEEE_A:
+			ratr_value &= 0x00000FF0;
+			break;
+		case IEEE_B:
+			ratr_value &= 0x0000000D;
+			break;
+		case IEEE_G:
+			ratr_value &= 0x00000FF5;
+			break;
+		case IEEE_N_24G:
+		case IEEE_N_5G:
+		{
+			bNMode = 1;
+
+			if (MimoPs == 0) //MIMO_PS_STATIC
+					{
+				ratr_value &= 0x0007F005;
+			}
+			else
+			{	// MCS rate only => for 11N mode.
+				u32	ratr_mask;
+
+				// 1T2R or 1T1R, Spatial Stream 2 should be disabled
+				if (	priv->rf_type == RF_1T2R ||
+					priv->rf_type == RF_1T1R ||
+					(ieee->pHTInfo->IOTAction & HT_IOT_ACT_DISABLE_TX_2SS) )
+						ratr_mask = 0x000ff005;
+					else
+						ratr_mask = 0x0f0ff005;
+
+				if((ieee->pHTInfo->bCurTxBW40MHz) &&
+				    !(ieee->pHTInfo->IOTAction & HT_IOT_ACT_DISABLE_TX_40_MHZ))
+					ratr_mask |= 0x00000010; // Set 6MBps
+
+				// Select rates for rate adaptive mechanism.
+					ratr_value &= ratr_mask;
+					}
+			}
+			break;
+		default:
+			if(0)
+			{
+				if(priv->rf_type == RF_1T2R)	// 1T2R, Spatial Stream 2 should be disabled
+				{
+				ratr_value &= 0x000ff0f5;
+				}
+				else
+				{
+				ratr_value &= 0x0f0ff0f5;
+				}
+			}
+			//printk("====>%s(), mode is not correct:%x\n", __FUNCTION__, ieee->mode);
+			break;
+	}
+
+#ifdef RTL8192SU_DISABLE_CCK_RATE
+	ratr_value &= 0x0FFFFFF0;
+#else
+	ratr_value &= 0x0FFFFFFF;
+#endif
+
+	// Get MAX MCS available.
+	if (   (bNMode && ((ieee->pHTInfo->IOTAction & HT_IOT_ACT_DISABLE_SHORT_GI)==0)) &&
+		((ieee->pHTInfo->bCurBW40MHz && ieee->pHTInfo->bCurShortGI40MHz) ||
+	        (!ieee->pHTInfo->bCurBW40MHz && ieee->pHTInfo->bCurShortGI20MHz)))
+	{
+		u8 shortGI_rate = 0;
+		u32 tmp_ratr_value = 0;
+		ratr_value |= 0x10000000;//???
+		tmp_ratr_value = (ratr_value>>12);
+		for(shortGI_rate=15; shortGI_rate>0; shortGI_rate--)
+		{
+			if((1<<shortGI_rate) & tmp_ratr_value)
+				break;
+		}
+		shortGI_rate = (shortGI_rate<<12)|(shortGI_rate<<8)|(shortGI_rate<<4)|(shortGI_rate);
+		write_nic_byte(dev, SG_RATE, shortGI_rate);
+		//printk("==>SG_RATE:%x\n", read_nic_byte(dev, SG_RATE));
+	}
+	write_nic_dword(dev, ARFR0+rate_index*4, ratr_value);
+	printk("=============>ARFR0+rate_index*4:%#x\n", ratr_value);
+
+	//2 UFWP
+	if (ratr_value & 0xfffff000){
+		//printk("===>set to N mode\n");
+		HalSetFwCmd8192S(dev, FW_CMD_RA_REFRESH_N);
+	}
+	else	{
+		//printk("===>set to B/G mode\n");
+		HalSetFwCmd8192S(dev, FW_CMD_RA_REFRESH_BG);
+	}
+}
+
+void rtl8192SU_link_change(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	struct ieee80211_device* ieee = priv->ieee80211;
+	//unsigned long flags;
+	u32 reg = 0;
+
+	printk("=====>%s 1\n", __func__);
+	reg = read_nic_dword(dev, RCR);
+
+	if (ieee->state == IEEE80211_LINKED)
+	{
+
+		rtl8192SU_net_update(dev);
+		rtl8192SU_update_ratr_table(dev);
+		ieee->SetFwCmdHandler(dev, FW_CMD_HIGH_PWR_ENABLE);
+		priv->ReceiveConfig = reg |= RCR_CBSSID;
+
+	}else{
+		priv->ReceiveConfig = reg &= ~RCR_CBSSID;
+
+	}
+
+	write_nic_dword(dev, RCR, reg);
+	rtl8192_update_msr(dev);
+
+	printk("<=====%s 2\n", __func__);
+}
+#else
+extern void rtl8192_update_ratr_table(struct net_device* dev);
+void rtl8192_link_change(struct net_device *dev)
+{
+//	int i;
+
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	struct ieee80211_device* ieee = priv->ieee80211;
+	//write_nic_word(dev, BCN_INTR_ITV, net->beacon_interval);
+	if (ieee->state == IEEE80211_LINKED)
+	{
+		rtl8192_net_update(dev);
+		rtl8192_update_ratr_table(dev);
+#if 1
+		//add this as in pure N mode, wep encryption will use software way, but there is no chance to set this as wep will not set group key in wext. WB.2008.07.08
+		if ((KEY_TYPE_WEP40 == ieee->pairwise_key_type) || (KEY_TYPE_WEP104 == ieee->pairwise_key_type))
+		EnableHWSecurityConfig8192(dev);
+#endif
+	}
+	/*update timing params*/
+//	RT_TRACE(COMP_CH, "========>%s(), chan:%d\n", __FUNCTION__, priv->chan);
+//	rtl8192_set_chan(dev, priv->chan);
+	 if (ieee->iw_mode == IW_MODE_INFRA || ieee->iw_mode == IW_MODE_ADHOC)
+        {
+                u32 reg = 0;
+                reg = read_nic_dword(dev, RCR);
+                if (priv->ieee80211->state == IEEE80211_LINKED)
+                        priv->ReceiveConfig = reg |= RCR_CBSSID;
+                else
+                        priv->ReceiveConfig = reg &= ~RCR_CBSSID;
+                write_nic_dword(dev, RCR, reg);
+        }
+
+//	rtl8192_set_rxconf(dev);
+}
+#endif
+
+static struct ieee80211_qos_parameters def_qos_parameters = {
+        {3,3,3,3},/* cw_min */
+        {7,7,7,7},/* cw_max */
+        {2,2,2,2},/* aifs */
+        {0,0,0,0},/* flags */
+        {0,0,0,0} /* tx_op_limit */
+};
+
+
+#if LINUX_VERSION_CODE >=KERNEL_VERSION(2,6,20)
+void rtl8192_update_beacon(struct work_struct * work)
+{
+        struct r8192_priv *priv = container_of(work, struct r8192_priv, update_beacon_wq.work);
+        struct net_device *dev = priv->ieee80211->dev;
+#else
+void rtl8192_update_beacon(struct net_device *dev)
+{
+        struct r8192_priv *priv = ieee80211_priv(dev);
+#endif
+ 	struct ieee80211_device* ieee = priv->ieee80211;
+	struct ieee80211_network* net = &ieee->current_network;
+
+	if (ieee->pHTInfo->bCurrentHTSupport)
+		HTUpdateSelfAndPeerSetting(ieee, net);
+	ieee->pHTInfo->bCurrentRT2RTLongSlotTime = net->bssht.bdRT2RTLongSlotTime;
+	// Joseph test for turbo mode with AP
+	ieee->pHTInfo->RT2RT_HT_Mode = net->bssht.RT2RT_HT_Mode;
+	rtl8192_update_cap(dev, net->capability);
+}
+/*
+* background support to run QoS activate functionality
+*/
+int WDCAPARA_ADD[] = {EDCAPARA_BE,EDCAPARA_BK,EDCAPARA_VI,EDCAPARA_VO};
+#if LINUX_VERSION_CODE >=KERNEL_VERSION(2,6,20)
+void rtl8192_qos_activate(struct work_struct * work)
+{
+        struct r8192_priv *priv = container_of(work, struct r8192_priv, qos_activate);
+        struct net_device *dev = priv->ieee80211->dev;
+#else
+void rtl8192_qos_activate(struct net_device *dev)
+{
+        struct r8192_priv *priv = ieee80211_priv(dev);
+#endif
+        struct ieee80211_qos_parameters *qos_parameters = &priv->ieee80211->current_network.qos_data.parameters;
+        u8 mode = priv->ieee80211->current_network.mode;
+        //u32 size = sizeof(struct ieee80211_qos_parameters);
+	u8  u1bAIFS;
+	u32 u4bAcParam;
+        int i;
+
+        if (priv == NULL)
+                return;
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,16))
+	down(&priv->mutex);
+#else
+       mutex_lock(&priv->mutex);
+#endif
+        if(priv->ieee80211->state != IEEE80211_LINKED)
+		goto success;
+	RT_TRACE(COMP_QOS,"qos active process with associate response received\n");
+	/* It better set slot time at first */
+	/* For we just support b/g mode at present, let the slot time at 9/20 selection */
+	/* update the ac parameter to related registers */
+	for(i = 0; i <  QOS_QUEUE_NUM; i++) {
+		//Mode G/A: slotTimeTimer = 9; Mode B: 20
+		u1bAIFS = qos_parameters->aifs[i] * ((mode&(IEEE_G|IEEE_N_24G)) ?9:20) + aSifsTime;
+		u4bAcParam = ((((u32)(qos_parameters->tx_op_limit[i]))<< AC_PARAM_TXOP_LIMIT_OFFSET)|
+				(((u32)(qos_parameters->cw_max[i]))<< AC_PARAM_ECW_MAX_OFFSET)|
+				(((u32)(qos_parameters->cw_min[i]))<< AC_PARAM_ECW_MIN_OFFSET)|
+				((u32)u1bAIFS << AC_PARAM_AIFS_OFFSET));
+
+		write_nic_dword(dev, WDCAPARA_ADD[i], u4bAcParam);
+		//write_nic_dword(dev, WDCAPARA_ADD[i], 0x005e4322);
+	}
+
+success:
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,16))
+	up(&priv->mutex);
+#else
+       mutex_unlock(&priv->mutex);
+#endif
+}
+
+static int rtl8192_qos_handle_probe_response(struct r8192_priv *priv,
+		int active_network,
+		struct ieee80211_network *network)
+{
+	int ret = 0;
+	u32 size = sizeof(struct ieee80211_qos_parameters);
+
+	if(priv->ieee80211->state !=IEEE80211_LINKED)
+                return ret;
+
+        if ((priv->ieee80211->iw_mode != IW_MODE_INFRA))
+                return ret;
+
+	if (network->flags & NETWORK_HAS_QOS_MASK) {
+		if (active_network &&
+				(network->flags & NETWORK_HAS_QOS_PARAMETERS))
+			network->qos_data.active = network->qos_data.supported;
+
+		if ((network->qos_data.active == 1) && (active_network == 1) &&
+				(network->flags & NETWORK_HAS_QOS_PARAMETERS) &&
+				(network->qos_data.old_param_count !=
+				 network->qos_data.param_count)) {
+			network->qos_data.old_param_count =
+				network->qos_data.param_count;
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+			queue_work(priv->priv_wq, &priv->qos_activate);
+#else
+			schedule_task(&priv->qos_activate);
+#endif
+			RT_TRACE (COMP_QOS, "QoS parameters change call "
+					"qos_activate\n");
+		}
+	} else {
+		memcpy(&priv->ieee80211->current_network.qos_data.parameters,\
+		       &def_qos_parameters, size);
+
+		if ((network->qos_data.active == 1) && (active_network == 1)) {
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+			queue_work(priv->priv_wq, &priv->qos_activate);
+#else
+			schedule_task(&priv->qos_activate);
+#endif
+			RT_TRACE(COMP_QOS, "QoS was disabled call qos_activate \n");
+		}
+		network->qos_data.active = 0;
+		network->qos_data.supported = 0;
+	}
+
+	return 0;
+}
+
+/* handle manage frame frame beacon and probe response */
+static int rtl8192_handle_beacon(struct net_device * dev,
+                              struct ieee80211_beacon * beacon,
+                              struct ieee80211_network * network)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	rtl8192_qos_handle_probe_response(priv,1,network);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+	queue_delayed_work(priv->priv_wq, &priv->update_beacon_wq, 0);
+#else
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+	schedule_task(&priv->update_beacon_wq);
+#else
+	queue_work(priv->priv_wq, &priv->update_beacon_wq);
+#endif
+
+#endif
+	return 0;
+
+}
+
+/*
+* handling the beaconing responses. if we get different QoS setting
+* off the network from the associated setting, adjust the QoS
+* setting
+*/
+static int rtl8192_qos_association_resp(struct r8192_priv *priv,
+                                    struct ieee80211_network *network)
+{
+        int ret = 0;
+        unsigned long flags;
+        u32 size = sizeof(struct ieee80211_qos_parameters);
+        int set_qos_param = 0;
+
+        if ((priv == NULL) || (network == NULL))
+                return ret;
+
+	if(priv->ieee80211->state !=IEEE80211_LINKED)
+                return ret;
+
+        if ((priv->ieee80211->iw_mode != IW_MODE_INFRA))
+                return ret;
+
+        spin_lock_irqsave(&priv->ieee80211->lock, flags);
+	if(network->flags & NETWORK_HAS_QOS_PARAMETERS) {
+		memcpy(&priv->ieee80211->current_network.qos_data.parameters,\
+			 &network->qos_data.parameters,\
+			sizeof(struct ieee80211_qos_parameters));
+		priv->ieee80211->current_network.qos_data.active = 1;
+#if 0
+		if((priv->ieee80211->current_network.qos_data.param_count != \
+					network->qos_data.param_count))
+#endif
+		 {
+                        set_qos_param = 1;
+			/* update qos parameter for current network */
+			priv->ieee80211->current_network.qos_data.old_param_count = \
+				 priv->ieee80211->current_network.qos_data.param_count;
+			priv->ieee80211->current_network.qos_data.param_count = \
+			     	 network->qos_data.param_count;
+		}
+        } else {
+		memcpy(&priv->ieee80211->current_network.qos_data.parameters,\
+		       &def_qos_parameters, size);
+		priv->ieee80211->current_network.qos_data.active = 0;
+		priv->ieee80211->current_network.qos_data.supported = 0;
+                set_qos_param = 1;
+        }
+
+        spin_unlock_irqrestore(&priv->ieee80211->lock, flags);
+
+	RT_TRACE(COMP_QOS, "%s: network->flags = %d,%d\n",__FUNCTION__,network->flags ,priv->ieee80211->current_network.qos_data.active);
+	if (set_qos_param == 1)
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+		queue_work(priv->priv_wq, &priv->qos_activate);
+#else
+		schedule_task(&priv->qos_activate);
+#endif
+
+
+        return ret;
+}
+
+
+static int rtl8192_handle_assoc_response(struct net_device *dev,
+                                     struct ieee80211_assoc_response_frame *resp,
+                                     struct ieee80211_network *network)
+{
+        struct r8192_priv *priv = ieee80211_priv(dev);
+        rtl8192_qos_association_resp(priv, network);
+        return 0;
+}
+
+
+void rtl8192_update_ratr_table(struct net_device* dev)
+	//	POCTET_STRING	posLegacyRate,
+	//	u8*			pMcsRate)
+	//	PRT_WLAN_STA	pEntry)
+{
+	struct r8192_priv* priv = ieee80211_priv(dev);
+	struct ieee80211_device* ieee = priv->ieee80211;
+	u8* pMcsRate = ieee->dot11HTOperationalRateSet;
+	//struct ieee80211_network *net = &ieee->current_network;
+	u32 ratr_value = 0;
+	u8 rate_index = 0;
+	rtl8192_config_rate(dev, (u16*)(&ratr_value));
+	ratr_value |= (*(u16*)(pMcsRate)) << 12;
+//	switch (net->mode)
+	switch (ieee->mode)
+	{
+		case IEEE_A:
+			ratr_value &= 0x00000FF0;
+			break;
+		case IEEE_B:
+			ratr_value &= 0x0000000F;
+			break;
+		case IEEE_G:
+			ratr_value &= 0x00000FF7;
+			break;
+		case IEEE_N_24G:
+		case IEEE_N_5G:
+			if (ieee->pHTInfo->PeerMimoPs == 0) //MIMO_PS_STATIC
+				ratr_value &= 0x0007F007;
+			else{
+				if (priv->rf_type == RF_1T2R)
+					ratr_value &= 0x000FF007;
+				else
+					ratr_value &= 0x0F81F007;
+			}
+			break;
+		default:
+			break;
+	}
+	ratr_value &= 0x0FFFFFFF;
+	if(ieee->pHTInfo->bCurTxBW40MHz && ieee->pHTInfo->bCurShortGI40MHz){
+		ratr_value |= 0x80000000;
+	}else if(!ieee->pHTInfo->bCurTxBW40MHz && ieee->pHTInfo->bCurShortGI20MHz){
+		ratr_value |= 0x80000000;
+	}
+	write_nic_dword(dev, RATR0+rate_index*4, ratr_value);
+	write_nic_byte(dev, UFWP, 1);
+}
+
+static u8 ccmp_ie[4] = {0x00,0x50,0xf2,0x04};
+static u8 ccmp_rsn_ie[4] = {0x00, 0x0f, 0xac, 0x04};
+bool GetNmodeSupportBySecCfg8192(struct net_device*dev)
+{
+#if 1
+	struct r8192_priv* priv = ieee80211_priv(dev);
+	struct ieee80211_device* ieee = priv->ieee80211;
+	struct ieee80211_network * network = &ieee->current_network;
+        int wpa_ie_len= ieee->wpa_ie_len;
+        struct ieee80211_crypt_data* crypt;
+        int encrypt;
+#if (defined (RTL8192SU_FPGA_2MAC_VERIFICATION)||defined (RTL8192SU_ASIC_VERIFICATION))
+	return TRUE;
+#endif
+
+        crypt = ieee->crypt[ieee->tx_keyidx];
+	//we use connecting AP's capability instead of only security config on our driver to distinguish whether it should use N mode or G mode
+        encrypt = (network->capability & WLAN_CAPABILITY_PRIVACY) || (ieee->host_encrypt && crypt && crypt->ops && (0 == strcmp(crypt->ops->name,"WEP")));
+
+	/* simply judge  */
+	if(encrypt && (wpa_ie_len == 0)) {
+		/* wep encryption, no N mode setting */
+		return false;
+//	} else if((wpa_ie_len != 0)&&(memcmp(&(ieee->wpa_ie[14]),ccmp_ie,4))) {
+	} else if((wpa_ie_len != 0)) {
+		/* parse pairwise key type */
+		//if((pairwisekey = WEP40)||(pairwisekey = WEP104)||(pairwisekey = TKIP))
+		if (((ieee->wpa_ie[0] == 0xdd) && (!memcmp(&(ieee->wpa_ie[14]),ccmp_ie,4))) || ((ieee->wpa_ie[0] == 0x30) && (!memcmp(&ieee->wpa_ie[10],ccmp_rsn_ie, 4))))
+			return true;
+		else
+			return false;
+	} else {
+		return true;
+	}
+
+#if 0
+        //In here we discuss with SD4 David. He think we still can send TKIP in broadcast group key in MCS rate.
+        //We can't force in G mode if Pairwie key is AES and group key is TKIP
+        if((pSecInfo->GroupEncAlgorithm == WEP104_Encryption) || (pSecInfo->GroupEncAlgorithm == WEP40_Encryption)  ||
+           (pSecInfo->PairwiseEncAlgorithm == WEP104_Encryption) ||
+           (pSecInfo->PairwiseEncAlgorithm == WEP40_Encryption) || (pSecInfo->PairwiseEncAlgorithm == TKIP_Encryption))
+        {
+                return  false;
+        }
+        else
+                return true;
+#endif
+	return true;
+#endif
+}
+
+bool GetHalfNmodeSupportByAPs819xUsb(struct net_device* dev)
+{
+	bool			Reval;
+	struct r8192_priv* priv = ieee80211_priv(dev);
+	struct ieee80211_device* ieee = priv->ieee80211;
+
+// 	Added by Roger, 2008.08.29.
+#ifdef RTL8192SU
+	return false;
+#endif
+
+	if(ieee->bHalfWirelessN24GMode == true)
+		Reval = true;
+	else
+		Reval =  false;
+
+	return Reval;
+}
+
+void rtl8192_refresh_supportrate(struct r8192_priv* priv)
+{
+	struct ieee80211_device* ieee = priv->ieee80211;
+	//we donot consider set support rate for ABG mode, only HT MCS rate is set here.
+	if (ieee->mode == WIRELESS_MODE_N_24G || ieee->mode == WIRELESS_MODE_N_5G)
+	{
+		memcpy(ieee->Regdot11HTOperationalRateSet, ieee->RegHTSuppRateSet, 16);
+		//RT_DEBUG_DATA(COMP_INIT, ieee->RegHTSuppRateSet, 16);
+		//RT_DEBUG_DATA(COMP_INIT, ieee->Regdot11HTOperationalRateSet, 16);
+	}
+	else
+		memset(ieee->Regdot11HTOperationalRateSet, 0, 16);
+	return;
+}
+
+u8 rtl8192_getSupportedWireleeMode(struct net_device*dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u8 ret = 0;
+	switch(priv->rf_chip)
+	{
+		case RF_8225:
+		case RF_8256:
+		case RF_PSEUDO_11N:
+		case RF_6052:
+			ret = (WIRELESS_MODE_N_24G|WIRELESS_MODE_G|WIRELESS_MODE_B);
+			break;
+		case RF_8258:
+			ret = (WIRELESS_MODE_A|WIRELESS_MODE_N_5G);
+			break;
+		default:
+			ret = WIRELESS_MODE_B;
+			break;
+	}
+	return ret;
+}
+void rtl8192_SetWirelessMode(struct net_device* dev, u8 wireless_mode)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u8 bSupportMode = rtl8192_getSupportedWireleeMode(dev);
+
+#if 1
+	if ((wireless_mode == WIRELESS_MODE_AUTO) || ((wireless_mode&bSupportMode)==0))
+	{
+		if(bSupportMode & WIRELESS_MODE_N_24G)
+		{
+			wireless_mode = WIRELESS_MODE_N_24G;
+		}
+		else if(bSupportMode & WIRELESS_MODE_N_5G)
+		{
+			wireless_mode = WIRELESS_MODE_N_5G;
+		}
+		else if((bSupportMode & WIRELESS_MODE_A))
+		{
+			wireless_mode = WIRELESS_MODE_A;
+		}
+		else if((bSupportMode & WIRELESS_MODE_G))
+		{
+			wireless_mode = WIRELESS_MODE_G;
+		}
+		else if((bSupportMode & WIRELESS_MODE_B))
+		{
+			wireless_mode = WIRELESS_MODE_B;
+		}
+		else{
+			RT_TRACE(COMP_ERR, "%s(), No valid wireless mode supported, SupportedWirelessMode(%x)!!!\n", __FUNCTION__,bSupportMode);
+			wireless_mode = WIRELESS_MODE_B;
+		}
+	}
+#ifdef TO_DO_LIST //// TODO: this function doesn't work well at this time, we shoud wait for FPGA
+	ActUpdateChannelAccessSetting( pAdapter, pHalData->CurrentWirelessMode, &pAdapter->MgntInfo.Info8185.ChannelAccessSetting );
+#endif
+#ifdef RTL8192SU
+	//LZM 090306 usb crash here, mark it temp
+	//write_nic_word(dev, SIFS_OFDM, 0x0e0e);
+#endif
+	priv->ieee80211->mode = wireless_mode;
+
+	if ((wireless_mode == WIRELESS_MODE_N_24G) ||  (wireless_mode == WIRELESS_MODE_N_5G))
+		priv->ieee80211->pHTInfo->bEnableHT = 1;
+	else
+		priv->ieee80211->pHTInfo->bEnableHT = 0;
+	RT_TRACE(COMP_INIT, "Current Wireless Mode is %x\n", wireless_mode);
+	rtl8192_refresh_supportrate(priv);
+#endif
+
+}
+
+
+short rtl8192_is_tx_queue_empty(struct net_device *dev)
+{
+	int i=0;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	//struct ieee80211_device* ieee = priv->ieee80211;
+	for (i=0; i<=MGNT_QUEUE; i++)
+	{
+		if ((i== TXCMD_QUEUE) || (i == HCCA_QUEUE) )
+			continue;
+		if (atomic_read(&priv->tx_pending[i]))
+		{
+			printk("===>tx queue is not empty:%d, %d\n", i, atomic_read(&priv->tx_pending[i]));
+			return 0;
+		}
+	}
+	return 1;
+}
+#if 0
+void rtl8192_rq_tx_ack(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	priv->ieee80211->ack_tx_to_ieee = 1;
+}
+#endif
+void rtl8192_hw_sleep_down(struct net_device *dev)
+{
+	RT_TRACE(COMP_POWER, "%s()============>come to sleep down\n", __FUNCTION__);
+#ifdef TODO
+//	MgntActSet_RF_State(dev, eRfSleep, RF_CHANGE_BY_PS);
+#endif
+}
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+void rtl8192_hw_sleep_wq (struct work_struct *work)
+{
+//      struct r8180_priv *priv = container_of(work, struct r8180_priv, watch_dog_wq);
+//      struct ieee80211_device * ieee = (struct ieee80211_device*)
+//                                             container_of(work, struct ieee80211_device, watch_dog_wq);
+        struct delayed_work *dwork = container_of(work,struct delayed_work,work);
+        struct ieee80211_device *ieee = container_of(dwork,struct ieee80211_device,hw_sleep_wq);
+        struct net_device *dev = ieee->dev;
+#else
+void rtl8192_hw_sleep_wq(struct net_device* dev)
+{
+#endif
+	//printk("=========>%s()\n", __FUNCTION__);
+        rtl8192_hw_sleep_down(dev);
+}
+//	printk("dev is %d\n",dev);
+//	printk("&*&(^*(&(&=========>%s()\n", __FUNCTION__);
+void rtl8192_hw_wakeup(struct net_device* dev)
+{
+//	u32 flags = 0;
+
+//	spin_lock_irqsave(&priv->ps_lock,flags);
+	RT_TRACE(COMP_POWER, "%s()============>come to wake up\n", __FUNCTION__);
+#ifdef TODO
+//	MgntActSet_RF_State(dev, eRfSleep, RF_CHANGE_BY_PS);
+#endif
+	//FIXME: will we send package stored while nic is sleep?
+//	spin_unlock_irqrestore(&priv->ps_lock,flags);
+}
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+void rtl8192_hw_wakeup_wq (struct work_struct *work)
+{
+//	struct r8180_priv *priv = container_of(work, struct r8180_priv, watch_dog_wq);
+//	struct ieee80211_device * ieee = (struct ieee80211_device*)
+//	                                       container_of(work, struct ieee80211_device, watch_dog_wq);
+	struct delayed_work *dwork = container_of(work,struct delayed_work,work);
+	struct ieee80211_device *ieee = container_of(dwork,struct ieee80211_device,hw_wakeup_wq);
+	struct net_device *dev = ieee->dev;
+#else
+void rtl8192_hw_wakeup_wq(struct net_device* dev)
+{
+#endif
+	rtl8192_hw_wakeup(dev);
+
+}
+
+#define MIN_SLEEP_TIME 50
+#define MAX_SLEEP_TIME 10000
+void rtl8192_hw_to_sleep(struct net_device *dev, u32 th, u32 tl)
+{
+
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	u32 rb = jiffies;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->ps_lock,flags);
+
+	/* Writing HW register with 0 equals to disable
+	 * the timer, that is not really what we want
+	 */
+	tl -= MSECS(4+16+7);
+
+	//if(tl == 0) tl = 1;
+
+	/* FIXME HACK FIXME HACK */
+//	force_pci_posting(dev);
+	//mdelay(1);
+
+//	rb = read_nic_dword(dev, TSFTR);
+
+	/* If the interval in witch we are requested to sleep is too
+	 * short then give up and remain awake
+	 */
+	if(((tl>=rb)&& (tl-rb) <= MSECS(MIN_SLEEP_TIME))
+		||((rb>tl)&& (rb-tl) < MSECS(MIN_SLEEP_TIME))) {
+		spin_unlock_irqrestore(&priv->ps_lock,flags);
+		printk("too short to sleep\n");
+		return;
+	}
+
+//	write_nic_dword(dev, TimerInt, tl);
+//	rb = read_nic_dword(dev, TSFTR);
+	{
+		u32 tmp = (tl>rb)?(tl-rb):(rb-tl);
+	//	if (tl<rb)
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+		schedule_task(&priv->ieee80211->hw_wakeup_wq);
+#else
+		queue_delayed_work(priv->ieee80211->wq, &priv->ieee80211->hw_wakeup_wq, tmp); //as tl may be less than rb
+#endif
+	}
+	/* if we suspect the TimerInt is gone beyond tl
+	 * while setting it, then give up
+	 */
+#if 1
+	if(((tl > rb) && ((tl-rb) > MSECS(MAX_SLEEP_TIME)))||
+		((tl < rb) && ((rb-tl) > MSECS(MAX_SLEEP_TIME)))) {
+		printk("========>too long to sleep:%x, %x, %lx\n", tl, rb,  MSECS(MAX_SLEEP_TIME));
+		spin_unlock_irqrestore(&priv->ps_lock,flags);
+		return;
+	}
+#endif
+//	if(priv->rf_sleep)
+//		priv->rf_sleep(dev);
+
+	//printk("<=========%s()\n", __FUNCTION__);
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+	schedule_task(&priv->ieee80211->hw_sleep_wq);
+#else
+	queue_delayed_work(priv->ieee80211->wq, (void *)&priv->ieee80211->hw_sleep_wq,0);
+#endif
+	spin_unlock_irqrestore(&priv->ps_lock,flags);
+}
+//init priv variables here. only non_zero value should be initialized here.
+static void rtl8192_init_priv_variable(struct net_device* dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u8 i;
+	priv->card_8192 = NIC_8192U;
+	priv->chan = 1; //set to channel 1
+	priv->ieee80211->mode = WIRELESS_MODE_AUTO; //SET AUTO
+	priv->ieee80211->iw_mode = IW_MODE_INFRA;
+	priv->ieee80211->ieee_up=0;
+	priv->retry_rts = DEFAULT_RETRY_RTS;
+	priv->retry_data = DEFAULT_RETRY_DATA;
+	priv->ieee80211->rts = DEFAULT_RTS_THRESHOLD;
+	priv->ieee80211->rate = 110; //11 mbps
+	priv->ieee80211->short_slot = 1;
+	priv->promisc = (dev->flags & IFF_PROMISC) ? 1:0;
+	priv->CckPwEnl = 6;
+	//for silent reset
+	priv->IrpPendingCount = 1;
+	priv->ResetProgress = RESET_TYPE_NORESET;
+	priv->bForcedSilentReset = 0;
+	priv->bDisableNormalResetCheck = false;
+	priv->force_reset = false;
+
+	priv->ieee80211->FwRWRF = 0; 	//we don't use FW read/write RF until stable firmware is available.
+	priv->ieee80211->current_network.beacon_interval = DEFAULT_BEACONINTERVAL;
+	priv->ieee80211->iw_mode = IW_MODE_INFRA;
+	priv->ieee80211->softmac_features  = IEEE_SOFTMAC_SCAN |
+		IEEE_SOFTMAC_ASSOCIATE | IEEE_SOFTMAC_PROBERQ |
+		IEEE_SOFTMAC_PROBERS | IEEE_SOFTMAC_TX_QUEUE |
+		IEEE_SOFTMAC_BEACONS;//added by amy 080604 //|  //IEEE_SOFTMAC_SINGLE_QUEUE;
+
+	priv->ieee80211->active_scan = 1;
+	priv->ieee80211->modulation = IEEE80211_CCK_MODULATION | IEEE80211_OFDM_MODULATION;
+	priv->ieee80211->host_encrypt = 1;
+	priv->ieee80211->host_decrypt = 1;
+	priv->ieee80211->start_send_beacons = NULL;//rtl819xusb_beacon_tx;//-by amy 080604
+	priv->ieee80211->stop_send_beacons = NULL;//rtl8192_beacon_stop;//-by amy 080604
+	priv->ieee80211->softmac_hard_start_xmit = rtl8192_hard_start_xmit;
+	priv->ieee80211->set_chan = rtl8192_set_chan;
+	priv->ieee80211->link_change = priv->ops->rtl819x_link_change;
+	priv->ieee80211->softmac_data_hard_start_xmit = rtl8192_hard_data_xmit;
+	priv->ieee80211->data_hard_stop = rtl8192_data_hard_stop;
+	priv->ieee80211->data_hard_resume = rtl8192_data_hard_resume;
+	priv->ieee80211->init_wmmparam_flag = 0;
+	priv->ieee80211->fts = DEFAULT_FRAG_THRESHOLD;
+	priv->ieee80211->check_nic_enough_desc = check_nic_enough_desc;
+	priv->ieee80211->tx_headroom = TX_PACKET_SHIFT_BYTES;
+	priv->ieee80211->qos_support = 1;
+
+	//added by WB
+//	priv->ieee80211->SwChnlByTimerHandler = rtl8192_phy_SwChnl;
+	priv->ieee80211->SetBWModeHandler = rtl8192_SetBWMode;
+	priv->ieee80211->handle_assoc_response = rtl8192_handle_assoc_response;
+	priv->ieee80211->handle_beacon = rtl8192_handle_beacon;
+	//for LPS
+	priv->ieee80211->sta_wake_up = rtl8192_hw_wakeup;
+//	priv->ieee80211->ps_request_tx_ack = rtl8192_rq_tx_ack;
+	priv->ieee80211->enter_sleep_state = rtl8192_hw_to_sleep;
+	priv->ieee80211->ps_is_queue_empty = rtl8192_is_tx_queue_empty;
+	//added by david
+	priv->ieee80211->GetNmodeSupportBySecCfg = GetNmodeSupportBySecCfg8192;
+	priv->ieee80211->GetHalfNmodeSupportByAPsHandler = GetHalfNmodeSupportByAPs819xUsb;
+	priv->ieee80211->SetWirelessMode = rtl8192_SetWirelessMode;
+	//added by amy
+	priv->ieee80211->InitialGainHandler = priv->ops->rtl819x_initial_gain;
+	priv->card_type = USB;
+
+#ifdef RTL8192SU
+//1 RTL8192SU/
+	priv->ieee80211->current_network.beacon_interval = DEFAULT_BEACONINTERVAL;
+	priv->ieee80211->SetFwCmdHandler = HalSetFwCmd8192S;
+	priv->bRFSiOrPi = 0;//o=si,1=pi;
+	//lzm add
+	priv->bInHctTest = false;
+
+	priv->MidHighPwrTHR_L1 = 0x3B;
+	priv->MidHighPwrTHR_L2 = 0x40;
+
+	if(priv->bInHctTest)
+  	{
+		priv->ShortRetryLimit = HAL_RETRY_LIMIT_AP_ADHOC;
+		priv->LongRetryLimit = HAL_RETRY_LIMIT_AP_ADHOC;
+  	}
+	else
+	{
+		priv->ShortRetryLimit = HAL_RETRY_LIMIT_INFRA;
+		priv->LongRetryLimit = HAL_RETRY_LIMIT_INFRA;
+	}
+
+	priv->SetFwCmdInProgress = false; //is set FW CMD in Progress? 92S only
+	priv->CurrentFwCmdIO = 0;
+
+	priv->MinSpaceCfg = 0;
+
+	priv->EarlyRxThreshold = 7;
+	priv->enable_gpio0 = 0;
+	priv->TransmitConfig	=
+				((u32)TCR_MXDMA_2048<<TCR_MXDMA_OFFSET) |	// Max DMA Burst Size per Tx DMA Burst, 7: reservied.
+				(priv->ShortRetryLimit<<TCR_SRL_OFFSET) |	// Short retry limit
+				(priv->LongRetryLimit<<TCR_LRL_OFFSET) |	// Long retry limit
+				(false ? TCR_SAT : 0);	// FALSE: HW provies PLCP length and LENGEXT, TURE: SW proiveds them
+	if(priv->bInHctTest)
+		priv->ReceiveConfig	=	//priv->CSMethod |
+								RCR_AMF | RCR_ADF |	//RCR_AAP | 	//accept management/data
+									RCR_ACF |RCR_APPFCS|						//accept control frame for SW AP needs PS-poll, 2005.07.07, by rcnjko.
+								RCR_AB | RCR_AM | RCR_APM |		//accept BC/MC/UC
+								RCR_AICV | RCR_ACRC32 | 		//accept ICV/CRC error packet
+								RCR_APP_PHYST_STAFF | RCR_APP_PHYST_RXFF |	// Accept PHY status
+								((u32)7<<RCR_MXDMA_OFFSET) | // Max DMA Burst Size per Rx DMA Burst, 7: unlimited.
+								(priv->EarlyRxThreshold<<RCR_FIFO_OFFSET) | // Rx FIFO Threshold, 7: No Rx threshold.
+								(priv->EarlyRxThreshold == 7 ? RCR_OnlyErlPkt:0);
+	else
+		priv->ReceiveConfig	=	//priv->CSMethod |
+									RCR_AMF | RCR_ADF | RCR_AB |
+									RCR_AM | RCR_APM |RCR_AAP |RCR_ADD3|RCR_APP_ICV|
+								RCR_APP_PHYST_STAFF | RCR_APP_PHYST_RXFF |	// Accept PHY status
+									RCR_APP_MIC | RCR_APPFCS;
+
+	// <Roger_EXP> 2008.06.16.
+	priv->IntrMask 		= 	(u16)(IMR_ROK | IMR_VODOK | IMR_VIDOK | IMR_BEDOK | IMR_BKDOK |		\
+								IMR_HCCADOK | IMR_MGNTDOK | IMR_COMDOK | IMR_HIGHDOK | 					\
+								IMR_BDOK | IMR_RXCMDOK | /*IMR_TIMEOUT0 |*/ IMR_RDU | IMR_RXFOVW	|			\
+								IMR_TXFOVW | IMR_BcnInt | IMR_TBDOK | IMR_TBDER);
+
+//1 End
+
+#else
+
+#ifdef TO_DO_LIST
+	if(Adapter->bInHctTest)
+  	{
+		pHalData->ShortRetryLimit = 7;
+		pHalData->LongRetryLimit = 7;
+  	}
+#endif
+	{
+		priv->ShortRetryLimit = 0x30;
+		priv->LongRetryLimit = 0x30;
+	}
+	priv->EarlyRxThreshold = 7;
+	priv->enable_gpio0 = 0;
+	priv->TransmitConfig =
+	//	TCR_DurProcMode |	//for RTL8185B, duration setting by HW
+	//?	TCR_DISReqQsize |
+                (TCR_MXDMA_2048<<TCR_MXDMA_OFFSET)|  // Max DMA Burst Size per Tx DMA Burst, 7: reservied.
+		(priv->ShortRetryLimit<<TCR_SRL_OFFSET)|	// Short retry limit
+		(priv->LongRetryLimit<<TCR_LRL_OFFSET) |	// Long retry limit
+		(false ? TCR_SAT: 0);	// FALSE: HW provies PLCP length and LENGEXT, TURE: SW proiveds them
+#ifdef TO_DO_LIST
+	if(Adapter->bInHctTest)
+		pHalData->ReceiveConfig	=	pHalData->CSMethod |
+						RCR_AMF | RCR_ADF |	//RCR_AAP | 	//accept management/data
+						//guangan200710
+						RCR_ACF |	//accept control frame for SW AP needs PS-poll, 2005.07.07, by rcnjko.
+						RCR_AB | RCR_AM | RCR_APM |		//accept BC/MC/UC
+						RCR_AICV | RCR_ACRC32 | 		//accept ICV/CRC error packet
+						((u32)7<<RCR_MXDMA_OFFSET) | // Max DMA Burst Size per Rx DMA Burst, 7: unlimited.
+						(pHalData->EarlyRxThreshold<<RCR_FIFO_OFFSET) | // Rx FIFO Threshold, 7: No Rx threshold.
+						(pHalData->EarlyRxThreshold == 7 ? RCR_OnlyErlPkt:0);
+	else
+
+#endif
+	priv->ReceiveConfig	=
+		RCR_AMF | RCR_ADF |		//accept management/data
+		RCR_ACF |			//accept control frame for SW AP needs PS-poll, 2005.07.07, by rcnjko.
+		RCR_AB | RCR_AM | RCR_APM |	//accept BC/MC/UC
+		//RCR_AICV | RCR_ACRC32 | 	//accept ICV/CRC error packet
+		((u32)7<<RCR_MXDMA_OFFSET)| // Max DMA Burst Size per Rx DMA Burst, 7: unlimited.
+		(priv->EarlyRxThreshold<<RX_FIFO_THRESHOLD_SHIFT) | // Rx FIFO Threshold, 7: No Rx threshold.
+		(priv->EarlyRxThreshold == 7 ? RCR_ONLYERLPKT:0);
+#endif
+
+	priv->AcmControl = 0;
+	priv->pFirmware = (rt_firmware*)vmalloc(sizeof(rt_firmware));
+	if (priv->pFirmware)
+	memset(priv->pFirmware, 0, sizeof(rt_firmware));
+
+	/* rx related queue */
+        skb_queue_head_init(&priv->rx_queue);
+	skb_queue_head_init(&priv->skb_queue);
+
+	/* Tx related queue */
+	for(i = 0; i < MAX_QUEUE_SIZE; i++) {
+		skb_queue_head_init(&priv->ieee80211->skb_waitQ [i]);
+	}
+	for(i = 0; i < MAX_QUEUE_SIZE; i++) {
+		skb_queue_head_init(&priv->ieee80211->skb_aggQ [i]);
+	}
+	for(i = 0; i < MAX_QUEUE_SIZE; i++) {
+		skb_queue_head_init(&priv->ieee80211->skb_drv_aggQ [i]);
+	}
+	priv->rf_set_chan = rtl8192_phy_SwChnl;
+}
+
+//init lock here
+static void rtl8192_init_priv_lock(struct r8192_priv* priv)
+{
+	spin_lock_init(&priv->tx_lock);
+	spin_lock_init(&priv->irq_lock);//added by thomas
+	//spin_lock_init(&priv->rf_lock);//use rf_sem, or will crash in some OS.
+	sema_init(&priv->wx_sem,1);
+	sema_init(&priv->rf_sem,1);
+	spin_lock_init(&priv->ps_lock);
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,16))
+	sema_init(&priv->mutex, 1);
+#else
+	mutex_init(&priv->mutex);
+#endif
+}
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+extern  void    rtl819x_watchdog_wqcallback(struct work_struct *work);
+#else
+extern  void    rtl819x_watchdog_wqcallback(struct net_device *dev);
+#endif
+
+void rtl8192_irq_rx_tasklet(struct r8192_priv *priv);
+//init tasklet and wait_queue here. only 2.6 above kernel is considered
+#define DRV_NAME "wlan0"
+static void rtl8192_init_priv_task(struct net_device* dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+#ifdef PF_SYNCTHREAD
+	priv->priv_wq = create_workqueue(DRV_NAME,0);
+#else
+	priv->priv_wq = create_workqueue(DRV_NAME);
+#endif
+#endif
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+	INIT_WORK(&priv->reset_wq, rtl8192_restart);
+
+	//INIT_DELAYED_WORK(&priv->watch_dog_wq, hal_dm_watchdog);
+	INIT_DELAYED_WORK(&priv->watch_dog_wq, rtl819x_watchdog_wqcallback);
+	INIT_DELAYED_WORK(&priv->txpower_tracking_wq,  dm_txpower_trackingcallback);
+//	INIT_DELAYED_WORK(&priv->gpio_change_rf_wq,  dm_gpio_change_rf_callback);
+	INIT_DELAYED_WORK(&priv->rfpath_check_wq,  dm_rf_pathcheck_workitemcallback);
+	INIT_DELAYED_WORK(&priv->update_beacon_wq, rtl8192_update_beacon);
+	INIT_DELAYED_WORK(&priv->initialgain_operate_wq, InitialGainOperateWorkItemCallBack);
+	//INIT_WORK(&priv->SwChnlWorkItem,  rtl8192_SwChnl_WorkItem);
+	//INIT_WORK(&priv->SetBWModeWorkItem,  rtl8192_SetBWModeWorkItem);
+	INIT_WORK(&priv->qos_activate, rtl8192_qos_activate);
+	INIT_DELAYED_WORK(&priv->ieee80211->hw_wakeup_wq,(void*) rtl8192_hw_wakeup_wq);
+	INIT_DELAYED_WORK(&priv->ieee80211->hw_sleep_wq,(void*) rtl8192_hw_sleep_wq);
+
+#else
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
+	tq_init(&priv->reset_wq, (void*)rtl8192_restart, dev);
+	tq_init(&priv->watch_dog_wq, (void*)rtl819x_watchdog_wqcallback, dev);
+	tq_init(&priv->txpower_tracking_wq, (void*)dm_txpower_trackingcallback, dev);
+	tq_init(&priv->rfpath_check_wq, (void*)dm_rf_pathcheck_workitemcallback, dev);
+	tq_init(&priv->update_beacon_wq, (void*)rtl8192_update_beacon, dev);
+	//tq_init(&priv->SwChnlWorkItem, (void*) rtl8192_SwChnl_WorkItem, dev);
+	//tq_init(&priv->SetBWModeWorkItem, (void*)rtl8192_SetBWModeWorkItem, dev);
+	tq_init(&priv->qos_activate, (void *)rtl8192_qos_activate, dev);
+	tq_init(&priv->ieee80211->hw_wakeup_wq,(void*) rtl8192_hw_wakeup_wq, dev);
+	tq_init(&priv->ieee80211->hw_sleep_wq,(void*) rtl8192_hw_sleep_wq, dev);
+
+#else
+	INIT_WORK(&priv->reset_wq,(void(*)(void*)) rtl8192_restart,dev);
+	//INIT_WORK(&priv->watch_dog_wq, (void(*)(void*)) hal_dm_watchdog,dev);
+	INIT_WORK(&priv->watch_dog_wq, (void(*)(void*)) rtl819x_watchdog_wqcallback,dev);
+	INIT_WORK(&priv->txpower_tracking_wq, (void(*)(void*)) dm_txpower_trackingcallback,dev);
+//	INIT_WORK(&priv->gpio_change_rf_wq, (void(*)(void*)) dm_gpio_change_rf_callback,dev);
+	INIT_WORK(&priv->rfpath_check_wq, (void(*)(void*)) dm_rf_pathcheck_workitemcallback,dev);
+	INIT_WORK(&priv->update_beacon_wq, (void(*)(void*))rtl8192_update_beacon,dev);
+	INIT_WORK(&priv->initialgain_operate_wq, (void(*)(void*))InitialGainOperateWorkItemCallBack,dev);
+	//INIT_WORK(&priv->SwChnlWorkItem, (void(*)(void*)) rtl8192_SwChnl_WorkItem, dev);
+	//INIT_WORK(&priv->SetBWModeWorkItem, (void(*)(void*)) rtl8192_SetBWModeWorkItem, dev);
+	INIT_WORK(&priv->qos_activate, (void(*)(void *))rtl8192_qos_activate, dev);
+	INIT_WORK(&priv->ieee80211->hw_wakeup_wq,(void*) rtl8192_hw_wakeup_wq, dev);
+	INIT_WORK(&priv->ieee80211->hw_sleep_wq,(void*) rtl8192_hw_sleep_wq, dev);
+#endif
+#endif
+
+	tasklet_init(&priv->irq_rx_tasklet,
+	     (void(*)(unsigned long))rtl8192_irq_rx_tasklet,
+	     (unsigned long)priv);
+}
+
+static void rtl8192_get_eeprom_size(struct net_device* dev)
+{
+	u16 curCR = 0;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	RT_TRACE(COMP_EPROM, "===========>%s()\n", __FUNCTION__);
+	curCR = read_nic_word_E(dev,EPROM_CMD);
+	RT_TRACE(COMP_EPROM, "read from Reg EPROM_CMD(%x):%x\n", EPROM_CMD, curCR);
+	//whether need I consider BIT5?
+	priv->epromtype = (curCR & Cmd9346CR_9356SEL) ? EPROM_93c56 : EPROM_93c46;
+	RT_TRACE(COMP_EPROM, "<===========%s(), epromtype:%d\n", __FUNCTION__, priv->epromtype);
+}
+
+//used to swap endian. as ntohl & htonl are not neccessary to swap endian, so use this instead.
+static inline u16 endian_swap(u16* data)
+{
+	u16 tmp = *data;
+	*data = (tmp >> 8) | (tmp << 8);
+	return *data;
+}
+
+#ifdef RTL8192SU
+u8 rtl8192SU_UsbOptionToEndPointNumber(u8 UsbOption)
+{
+	u8	nEndPoint = 0;
+	switch(UsbOption)
+	{
+		case 0:
+			nEndPoint = 6;
+			break;
+		case 1:
+			nEndPoint = 11;
+			break;
+		case 2:
+			nEndPoint = 4;
+			break;
+		default:
+			RT_TRACE(COMP_INIT, "UsbOptionToEndPointNumber(): Invalid UsbOption(%#x)\n", UsbOption);
+			break;
+	}
+	return nEndPoint;
+}
+
+u8 rtl8192SU_BoardTypeToRFtype(struct net_device* dev,  u8 Boardtype)
+{
+	u8	RFtype = RF_1T2R;
+
+	switch(Boardtype)
+	{
+		case 0:
+			RFtype = RF_1T1R;
+			break;
+		case 1:
+			RFtype = RF_1T2R;
+			break;
+		case 2:
+			RFtype = RF_2T2R;
+			break;
+		case 3:
+			RFtype = RF_2T2R_GREEN;
+			break;
+		default:
+			break;
+	}
+
+	return RFtype;
+}
+
+//
+//	Description:
+//		Config HW adapter information into initial value.
+//
+//	Assumption:
+//		1. After Auto load fail(i.e, check CR9346 fail)
+//
+//	Created by Roger, 2008.10.21.
+//
+void
+rtl8192SU_ConfigAdapterInfo8192SForAutoLoadFail(struct net_device* dev)
+{
+	struct r8192_priv 	*priv = ieee80211_priv(dev);
+	//u16			i,usValue;
+	//u8 sMacAddr[6] = {0x00, 0xE0, 0x4C, 0x81, 0x92, 0x00};
+	u8		rf_path, index;	// For EEPROM/EFUSE After V0.6_1117
+	int	i;
+
+	RT_TRACE(COMP_INIT, "====> ConfigAdapterInfo8192SForAutoLoadFail\n");
+
+	write_nic_byte(dev, SYS_ISO_CTRL+1, 0xE8); // Isolation signals from Loader
+	//PlatformStallExecution(10000);
+	mdelay(10);
+	write_nic_byte(dev, PMC_FSM, 0x02); // Enable Loader Data Keep
+
+	//RT_ASSERT(priv->AutoloadFailFlag==TRUE, ("ReadAdapterInfo8192SEEPROM(): AutoloadFailFlag !=TRUE\n"));
+
+	// Initialize IC Version && Channel Plan
+	priv->eeprom_vid = 0;
+	priv->eeprom_pid = 0;
+	priv->card_8192_version = 0;
+	priv->eeprom_ChannelPlan = 0;
+	priv->eeprom_CustomerID = 0;
+	priv->eeprom_SubCustomerID = 0;
+	priv->bIgnoreDiffRateTxPowerOffset = false;
+
+	RT_TRACE(COMP_INIT, "EEPROM VID = 0x%4x\n", priv->eeprom_vid);
+	RT_TRACE(COMP_INIT, "EEPROM PID = 0x%4x\n", priv->eeprom_pid);
+	RT_TRACE(COMP_INIT, "EEPROM Customer ID: 0x%2x\n", priv->eeprom_CustomerID);
+	RT_TRACE(COMP_INIT, "EEPROM SubCustomer ID: 0x%2x\n", priv->eeprom_SubCustomerID);
+	RT_TRACE(COMP_INIT, "EEPROM ChannelPlan = 0x%4x\n", priv->eeprom_ChannelPlan);
+	RT_TRACE(COMP_INIT, "IgnoreDiffRateTxPowerOffset = %d\n", priv->bIgnoreDiffRateTxPowerOffset);
+
+
+
+	priv->EEPROMUsbOption = EEPROM_USB_Default_OPTIONAL_FUNC;
+	RT_TRACE(COMP_INIT, "USB Option = %#x\n", priv->EEPROMUsbOption);
+
+	for(i=0; i<5; i++)
+		priv->EEPROMUsbPhyParam[i] = EEPROM_USB_Default_PHY_PARAM;
+
+	//RT_PRINT_DATA(COMP_INIT|COMP_EFUSE, DBG_LOUD, ("EFUSE USB PHY Param: \n"), priv->EEPROMUsbPhyParam, 5);
+
+	{
+	//<Roger_Notes> In this case, we random assigh MAC address here. 2008.10.15.
+		static u8 sMacAddr[6] = {0x00, 0xE0, 0x4C, 0x81, 0x92, 0x00};
+		u8	i;
+
+        	//sMacAddr[5] = (u8)GetRandomNumber(1, 254);
+
+		for(i = 0; i < 6; i++)
+			dev->dev_addr[i] = sMacAddr[i];
+	}
+	//NicIFSetMacAddress(Adapter, Adapter->PermanentAddress);
+	write_nic_dword(dev, IDR0, ((u32*)dev->dev_addr)[0]);
+	write_nic_word(dev, IDR4, ((u16*)(dev->dev_addr + 4))[0]);
+
+	RT_TRACE(COMP_INIT, "ReadAdapterInfo8192SEFuse(), Permanent Address = %02x-%02x-%02x-%02x-%02x-%02x\n",
+			dev->dev_addr[0], dev->dev_addr[1],
+			dev->dev_addr[2], dev->dev_addr[3],
+			dev->dev_addr[4], dev->dev_addr[5]);
+
+	priv->EEPROMBoardType = EEPROM_Default_BoardType;
+	priv->rf_type = RF_1T2R; //RF_2T2R
+	priv->EEPROMTxPowerDiff = EEPROM_Default_PwDiff;
+	priv->EEPROMThermalMeter = EEPROM_Default_ThermalMeter;
+	priv->EEPROMCrystalCap = EEPROM_Default_CrystalCap;
+	priv->EEPROMTxPwrBase = EEPROM_Default_TxPowerBase;
+	priv->EEPROMTSSI_A = EEPROM_Default_TSSI;
+	priv->EEPROMTSSI_B = EEPROM_Default_TSSI;
+	priv->EEPROMTxPwrTkMode = EEPROM_Default_TxPwrTkMode;
+
+
+#ifdef EEPROM_OLD_FORMAT_SUPPORT
+	for(i=0; i<6; i++)
+		{
+		priv->EEPROMHT2T_TxPwr[i] = EEPROM_Default_HT2T_TxPwr;
+		}
+
+		for(i=0; i<14; i++)
+		{
+		priv->EEPROMTxPowerLevelCCK24G[i] = (u8)(EEPROM_Default_TxPower & 0xff);
+			priv->EEPROMTxPowerLevelOFDM24G[i] = (u8)(EEPROM_Default_TxPower & 0xff);
+		}
+
+	//
+	// Update HAL variables.
+	//
+	memcpy( priv->TxPowerLevelOFDM24G, priv->EEPROMTxPowerLevelOFDM24G, 14);
+	memcpy( priv->TxPowerLevelCCK, priv->EEPROMTxPowerLevelCCK24G, 14);
+	//RT_PRINT_DATA(COMP_INIT|COMP_EFUSE, DBG_LOUD, ("HAL CCK 2.4G TxPwr: \n"), priv->TxPowerLevelCCK, 14);
+	//RT_PRINT_DATA(COMP_INIT|COMP_EFUSE, DBG_LOUD, ("HAL OFDM 2.4G TxPwr: \n"), priv->TxPowerLevelOFDM24G, 14);
+#else
+
+	for (rf_path = 0; rf_path < 2; rf_path++)
+	{
+		for (i = 0; i < 3; i++)
+		{
+			// Read CCK RF A & B Tx power
+			priv->RfCckChnlAreaTxPwr[rf_path][i] =
+			priv->RfOfdmChnlAreaTxPwr1T[rf_path][i] =
+			priv->RfOfdmChnlAreaTxPwr2T[rf_path][i] =
+			(u8)(EEPROM_Default_TxPower & 0xff);
+		}
+	}
+
+	for (i = 0; i < 3; i++)
+	{
+		//RT_TRACE((COMP_EFUSE), "CCK RF-%d CHan_Area-%d = 0x%x\n",  rf_path, i,
+		//priv->RfCckChnlAreaTxPwr[rf_path][i]);
+		//RT_TRACE((COMP_EFUSE), "OFDM-1T RF-%d CHan_Area-%d = 0x%x\n",  rf_path, i,
+		//priv->RfOfdmChnlAreaTxPwr1T[rf_path][i]);
+		//RT_TRACE((COMP_EFUSE), "OFDM-2T RF-%d CHan_Area-%d = 0x%x\n",  rf_path, i,
+		//priv->RfOfdmChnlAreaTxPwr2T[rf_path][i]);
+	}
+
+	// Assign dedicated channel tx power
+	for(i=0; i<14; i++)	// channel 1~3 use the same Tx Power Level.
+		{
+		if (i < 3)			// Cjanel 1-3
+			index = 0;
+		else if (i < 9)		// Channel 4-9
+			index = 1;
+		else				// Channel 10-14
+			index = 2;
+
+		// Record A & B CCK /OFDM - 1T/2T Channel area tx power
+		priv->RfTxPwrLevelCck[rf_path][i]  =
+		priv->RfCckChnlAreaTxPwr[rf_path][index];
+		priv->RfTxPwrLevelOfdm1T[rf_path][i]  =
+		priv->RfOfdmChnlAreaTxPwr1T[rf_path][index];
+		priv->RfTxPwrLevelOfdm2T[rf_path][i]  =
+		priv->RfOfdmChnlAreaTxPwr2T[rf_path][index];
+		}
+
+		for(i=0; i<14; i++)
+		{
+		//RT_TRACE((COMP_EFUSE), "Rf-%d TxPwr CH-%d CCK OFDM_1T OFDM_2T= 0x%x/0x%x/0x%x\n",
+		//rf_path, i, priv->RfTxPwrLevelCck[0][i],
+		//priv->RfTxPwrLevelOfdm1T[0][i] ,
+		//priv->RfTxPwrLevelOfdm2T[0][i] );
+		}
+#endif
+
+	//
+	// Update remained HAL variables.
+	//
+	priv->TSSI_13dBm = priv->EEPROMThermalMeter *100;
+	priv->LegacyHTTxPowerDiff = priv->EEPROMTxPowerDiff;//new
+	priv->TxPowerDiff = priv->EEPROMTxPowerDiff;
+	//priv->AntennaTxPwDiff[0] = (priv->EEPROMTxPowerDiff & 0xf);// Antenna B gain offset to antenna A, bit0~3
+	//priv->AntennaTxPwDiff[1] = ((priv->EEPROMTxPowerDiff & 0xf0)>>4);// Antenna C gain offset to antenna A, bit4~7
+	priv->CrystalCap = priv->EEPROMCrystalCap;	// CrystalCap, bit12~15
+	priv->ThermalMeter[0] = priv->EEPROMThermalMeter;// ThermalMeter, bit0~3 for RFIC1, bit4~7 for RFIC2
+	priv->LedStrategy = SW_LED_MODE0;
+
+	init_rate_adaptive(dev);
+
+	RT_TRACE(COMP_INIT, "<==== ConfigAdapterInfo8192SForAutoLoadFail\n");
+
+}
+
+#if 0
+static void rtl8192SU_ReadAdapterInfo8192SEEPROM(struct net_device* dev)
+{
+	u16 				EEPROMId = 0;
+	u8 				bLoad_From_EEPOM = false;
+	struct r8192_priv 	*priv = ieee80211_priv(dev);
+	u16 				tmpValue = 0;
+	u8				tmpBuffer[30];
+	int i;
+
+	RT_TRACE(COMP_EPROM, "===========>%s()\n", __FUNCTION__);
+
+
+	write_nic_byte(dev, SYS_ISO_CTRL+1, 0xE8); // Isolation signals from Loader
+	udelay(10000);
+	write_nic_byte(dev, PMC_FSM, 0x02); // Enable Loader Data Keep
+
+
+	EEPROMId = eprom_read(dev, 0); //first read EEPROM ID out;
+	RT_TRACE(COMP_EPROM, "EEPROM ID is 0x%x\n", EEPROMId);
+
+	if (EEPROMId != RTL8190_EEPROM_ID)
+	{
+		priv->AutoloadFailFlag = true;
+		RT_TRACE(COMP_ERR, "EEPROM ID is invalid(is 0x%x(should be 0x%x)\n", EEPROMId, RTL8190_EEPROM_ID);
+	}
+	else
+	{
+		priv->AutoloadFailFlag = false;
+		bLoad_From_EEPOM = true;
+	}
+
+	if (bLoad_From_EEPOM)
+	{
+		tmpValue = eprom_read(dev, (EEPROM_VID>>1));
+		priv->eeprom_vid = endian_swap(&tmpValue);
+		priv->eeprom_pid = eprom_read(dev, (EEPROM_PID>>1));
+
+		// Version ID, Channel plan
+		tmpValue = eprom_read(dev, (EEPROM_Version>>1));
+		//pHalData->card_8192_version = (VERSION_8192S)((usValue&0x00ff));
+		priv->eeprom_ChannelPlan =(tmpValue&0xff00)>>8;
+		priv->bTXPowerDataReadFromEEPORM = true;
+
+		// Customer ID, 0x00 and 0xff are reserved for Realtek.
+		tmpValue = eprom_read(dev, (u16)(EEPROM_CustomID>>1)) ;
+		priv->eeprom_CustomerID = (u8)( tmpValue & 0xff);
+		priv->eeprom_SubCustomerID = (u8)((tmpValue & 0xff00)>>8);
+	}
+	else
+	{
+		priv->eeprom_vid = 0;
+		priv->eeprom_pid = 0;
+		//priv->card_8192_version = VERSION_8192SU_A;
+		priv->eeprom_ChannelPlan = 0;
+		priv->eeprom_CustomerID = 0;
+		priv->eeprom_SubCustomerID = 0;
+	}
+	RT_TRACE(COMP_EPROM, "vid:0x%4x, pid:0x%4x, CustomID:0x%2x, ChanPlan:0x%x\n", priv->eeprom_vid, priv->eeprom_pid, priv->eeprom_CustomerID, priv->eeprom_ChannelPlan);
+	//set channelplan from eeprom
+	priv->ChannelPlan = priv->eeprom_ChannelPlan;// FIXLZM
+
+	RT_TRACE(COMP_INIT, "EEPROMId = 0x%4x\n", EEPROMId);
+	RT_TRACE(COMP_INIT, "EEPROM VID = 0x%4x\n", priv->eeprom_vid);
+	RT_TRACE(COMP_INIT, "EEPROM PID = 0x%4x\n", priv->eeprom_pid);
+	//RT_TRACE(COMP_INIT, DBG_LOUD, ("EEPROM Version ID: 0x%2x\n", pHalData->VersionID));
+	RT_TRACE(COMP_INIT, "EEPROM Customer ID: 0x%2x\n", priv->eeprom_CustomerID);
+	RT_TRACE(COMP_INIT, "EEPROM SubCustomer ID: 0x%2x\n", priv->eeprom_SubCustomerID);
+	RT_TRACE(COMP_INIT, "EEPROM ChannelPlan = 0x%4x\n", priv->eeprom_ChannelPlan);
+
+	// Read USB optional function.
+	if(bLoad_From_EEPOM)
+	{
+		tmpValue = eprom_read(dev, (EEPROM_USB_OPTIONAL>>1));
+		priv->EEPROMUsbOption = (u8)(tmpValue&0xff);
+	}
+	else
+	{
+		priv->EEPROMUsbOption = EEPROM_USB_Default_OPTIONAL_FUNC;
+	}
+
+	RT_TRACE(COMP_INIT, "USB Option = %#x\n", priv->EEPROMUsbOption);
+
+
+	if (bLoad_From_EEPOM)
+	{
+		int i;
+		for (i=0; i<6; i+=2)
+		{
+			u16 tmp = 0;
+			tmp = eprom_read(dev, (u16)((EEPROM_NODE_ADDRESS_BYTE_0 + i)>>1));
+			*(u16*)(&dev->dev_addr[i]) = tmp;
+		}
+	}
+	else
+	{
+		//<Roger_Notes> In this case, we random assigh MAC address here. 2008.10.15.
+		static u8 sMacAddr[6] = {0x00, 0xE0, 0x4C, 0x81, 0x92, 0x00};
+		u8	i;
+
+		//sMacAddr[5] = (u8)GetRandomNumber(1, 254);
+
+		for(i = 0; i < 6; i++)
+			dev->dev_addr[i] = sMacAddr[i];
+
+		//memcpy(dev->dev_addr, sMacAddr, 6);
+		//should I set IDR0 here?
+	}
+	write_nic_dword(dev, IDR0, ((u32*)dev->dev_addr)[0]);
+	write_nic_word(dev, IDR4, ((u16*)(dev->dev_addr + 4))[0]);
+	RT_TRACE(COMP_EPROM, "MAC addr:"MAC_FMT"\n", MAC_ARG(dev->dev_addr));
+
+	priv->rf_type = RTL819X_DEFAULT_RF_TYPE; //default 1T2R
+#if (defined (RTL8192SU_FPGA_2MAC_VERIFICATION)||defined (RTL8192SU_ASIC_VERIFICATION))
+	priv->rf_chip = RF_6052;
+	priv->rf_type = RTL819X_DEFAULT_RF_TYPE;
+	//priv->card_8192_version = VERSION_8192SU_A; //Over write for temporally experiment. 2008.10.16. By Roger.
+#else
+	priv->rf_chip = RF_8256;
+#endif
+
+	{
+#if 0
+		if(bLoad_From_EEPOM)
+		{
+			tempval = (ReadEEprom(Adapter, (EEPROM_RFInd_PowerDiff>>1))) & 0xff;
+			if (tempval&0x80)	//RF-indication, bit[7]
+				pHalData->RF_Type = RF_1T2R;
+			else
+				pHalData->RF_Type = RF_2T4R;
+		}
+#endif
+
+		priv->EEPROMTxPowerDiff = EEPROM_Default_TxPowerDiff;
+		RT_TRACE(COMP_INIT, "TxPowerDiff = %#x\n", priv->EEPROMTxPowerDiff);
+
+
+		//
+		// Read antenna tx power offset of B/C/D to A  from EEPROM
+		// and read ThermalMeter from EEPROM
+		//
+		if(bLoad_From_EEPOM)
+		{
+			tmpValue = eprom_read(dev, (EEPROM_PwDiff>>1));
+			priv->EEPROMPwDiff = tmpValue&0x00ff;
+			priv->EEPROMThermalMeter = (tmpValue&0xff00)>>8;
+		}
+		else
+		{
+			priv->EEPROMPwDiff = EEPROM_Default_PwDiff;
+			priv->EEPROMThermalMeter = EEPROM_Default_ThermalMeter;
+		}
+		RT_TRACE(COMP_INIT, "PwDiff = %#x\n", priv->EEPROMPwDiff);
+		RT_TRACE(COMP_INIT, "ThermalMeter = %#x\n", priv->EEPROMThermalMeter);
+
+		priv->TSSI_13dBm = priv->EEPROMThermalMeter *100;
+
+
+		// Read CrystalCap from EEPROM
+		if(bLoad_From_EEPOM)
+		{
+			priv->EEPROMCrystalCap =(u8) (((eprom_read(dev, (EEPROM_CrystalCap>>1)))&0xf000)>>12);
+		}
+		else
+		{
+			priv->EEPROMCrystalCap = EEPROM_Default_CrystalCap;
+		}
+		RT_TRACE(COMP_INIT, "CrystalCap = %#x\n", priv->EEPROMCrystalCap);
+
+
+		//if(pHalData->EEPROM_Def_Ver == 0)	// old eeprom definition
+		{
+
+			//
+			// Get Tx Power Base.//===>
+			//
+			if(bLoad_From_EEPOM)
+			{
+				priv->EEPROMTxPwrBase =(u8) ((eprom_read(dev, (EEPROM_TxPowerBase>>1)))&0xff);
+			}
+			else
+			{
+				priv->EEPROMTxPwrBase = EEPROM_Default_TxPowerBase;
+			}
+
+			RT_TRACE(COMP_INIT, "TxPwrBase = %#x\n", priv->EEPROMTxPwrBase);
+
+			//
+			// Get CustomerID(Boad Type)
+			// i.e., 0x0: RTL8188SU, 0x1: RTL8191SU, 0x2: RTL8192SU, 0x3: RTL8191GU.
+			// Others: Reserved. Default is 0x2: RTL8192SU.
+			//
+			if(bLoad_From_EEPOM)
+			{
+				tmpValue = eprom_read(dev, (u16) (EEPROM_BoardType>>1));
+				priv->EEPROMBoardType = (u8)(tmpValue&0xff);
+			}
+			else
+			{
+				priv->EEPROMBoardType = EEPROM_Default_BoardType;
+			}
+
+			RT_TRACE(COMP_INIT, "BoardType = %#x\n", priv->EEPROMBoardType);
+
+#ifdef EEPROM_OLD_FORMAT_SUPPORT
+
+			//
+			// Buffer TxPwIdx(i.e., from offset 0x58~0x75, total 30Bytes)
+			//
+			if(bLoad_From_EEPOM)
+			{
+				for(i = 0; i < 30; i += 2)
+				{
+					tmpValue = eprom_read(dev, (u16) ((EEPROM_TxPowerBase+i)>>1));
+					*((u16 *)(&tmpBuffer[i])) = tmpValue;
+				}
+			}
+
+			//
+			// Update CCK, OFDM Tx Power Index from above buffer.
+			//
+			if(bLoad_From_EEPOM)
+			{
+				for(i=0; i<14; i++)
+				{
+					priv->EEPROMTxPowerLevelCCK24G[i] = (u8)tmpBuffer[i+1];
+					priv->EEPROMTxPowerLevelOFDM24G[i] = (u8)tmpBuffer[i+15];
+				}
+
+			}
+			else
+			{
+				for(i=0; i<14; i++)
+				{
+					priv->EEPROMTxPowerLevelCCK24G[i] = (u8)(EEPROM_Default_TxPower & 0xff);
+					priv->EEPROMTxPowerLevelOFDM24G[i] = (u8)(EEPROM_Default_TxPower & 0xff);
+				}
+			}
+
+			for(i=0; i<14; i++)
+			{
+				RT_TRACE(COMP_INIT, "CCK 2.4G Tx Power Level, Index %d = 0x%02x\n", i, priv->EEPROMTxPowerLevelCCK24G[i]);
+				RT_TRACE(COMP_INIT, "OFDM 2.4G Tx Power Level, Index %d = 0x%02x\n", i, priv->EEPROMTxPowerLevelOFDM24G[i]);
+			}
+#else
+			// Please add code in the section!!!!
+			// And merge tx power difference section.
+#endif
+
+			//
+			// Get TSSI value for each path.
+			//
+			if(bLoad_From_EEPOM)
+			{
+				tmpValue = eprom_read(dev, (u16) ((EEPROM_TSSI_A)>>1));
+				priv->EEPROMTSSI_A = (u8)((tmpValue&0xff00)>>8);
+			}
+			else
+			{ // Default setting for Empty EEPROM
+				priv->EEPROMTSSI_A = EEPROM_Default_TSSI;
+			}
+
+			if(bLoad_From_EEPOM)
+			{
+				tmpValue = eprom_read(dev, (u16) ((EEPROM_TSSI_B)>>1));
+				priv->EEPROMTSSI_B = (u8)(tmpValue&0xff);
+				priv->EEPROMTxPwrTkMode = (u8)((tmpValue&0xff00)>>8);
+			}
+			else
+			{ // Default setting for Empty EEPROM
+				priv->EEPROMTSSI_B = EEPROM_Default_TSSI;
+				priv->EEPROMTxPwrTkMode = EEPROM_Default_TxPwrTkMode;
+			}
+
+			RT_TRACE(COMP_INIT, "TSSI_A = %#x, TSSI_B = %#x\n", priv->EEPROMTSSI_A, priv->EEPROMTSSI_B);
+			RT_TRACE(COMP_INIT, "TxPwrTkMod = %#x\n", priv->EEPROMTxPwrTkMode);
+
+#ifdef EEPROM_OLD_FORMAT_SUPPORT
+			//
+			// Get HT 2T Path A and B Power Index.
+			//
+			if(bLoad_From_EEPOM)
+			{
+				for(i = 0; i < 6; i += 2)
+				{
+					tmpValue = eprom_read(dev, (u16) ((EEPROM_HT2T_CH1_A+i)>>1));
+					*((u16*)(&priv->EEPROMHT2T_TxPwr[i])) = tmpValue;
+				}
+			}
+			else
+			{ // Default setting for Empty EEPROM
+				for(i=0; i<6; i++)
+				{
+					priv->EEPROMHT2T_TxPwr[i] = EEPROM_Default_HT2T_TxPwr;
+				}
+			}
+
+			for(i=0; i<6; i++)
+			{
+				RT_TRACE(COMP_INIT, "EEPROMHT2T_TxPwr, Index %d = 0x%02x\n", i, priv->EEPROMHT2T_TxPwr[i]);
+			}
+#else
+
+#endif
+		}
+
+#ifdef EEPROM_OLD_FORMAT_SUPPORT
+		//
+		// Update HAL variables.
+		//
+		for(i=0; i<14; i++)
+		{
+			priv->TxPowerLevelOFDM24G[i] = priv->EEPROMTxPowerLevelOFDM24G[i];
+			priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK24G[i];
+		}
+#else
+
+#endif
+		priv->TxPowerDiff = priv->EEPROMPwDiff;
+		// Antenna B gain offset to antenna A, bit0~3
+		priv->AntennaTxPwDiff[0] = (priv->EEPROMTxPowerDiff & 0xf);
+		// Antenna C gain offset to antenna A, bit4~7
+		priv->AntennaTxPwDiff[1] = ((priv->EEPROMTxPowerDiff & 0xf0)>>4);
+		// CrystalCap, bit12~15
+		priv->CrystalCap = priv->EEPROMCrystalCap;
+		// ThermalMeter, bit0~3 for RFIC1, bit4~7 for RFIC2
+		// 92U does not enable TX power tracking.
+		priv->ThermalMeter[0] = priv->EEPROMThermalMeter;
+	}
+
+	priv->LedStrategy = SW_LED_MODE0;
+
+	if(priv->rf_type == RF_1T2R)
+	{
+		RT_TRACE(COMP_EPROM, "\n1T2R config\n");
+	}
+	else
+	{
+		RT_TRACE(COMP_EPROM, "\n2T4R config\n");
+	}
+
+	// 2008/01/16 MH We can only know RF type in the function. So we have to init
+	// DIG RATR table again.
+	init_rate_adaptive(dev);
+	//we need init DIG RATR table here again.
+
+	RT_TRACE(COMP_EPROM, "<===========%s()\n", __FUNCTION__);
+	return;
+}
+
+//
+//	Description:
+//		1. Read HW adapter information by E-Fuse.
+//		2. Refered from SD1 Richard.
+//
+//	Assumption:
+//		1. Boot from E-Fuse and CR9346 regiser has verified.
+//		2. PASSIVE_LEVEL (USB interface)
+//
+//	Created by Roger, 2008.10.21.
+//
+void
+rtl8192SU_ReadAdapterInfo8192SEFuse(struct net_device* dev)
+{
+	struct r8192_priv 	*priv = ieee80211_priv(dev);
+	u16			i,usValue;
+	u16			EEPROMId;
+	u8			readbyte;
+	u8			OFDMTxPwr[14];
+	u8			CCKTxPwr[14];
+	u8			HT2T_TxPwr[6];
+	u8			UsbPhyParam[5];
+	u8			hwinfo[HWSET_MAX_SIZE_92S];
+
+
+	RT_TRACE(COMP_INIT, "====> ReadAdapterInfo8192SEFuse\n");
+
+	//
+	// <Roger_Notes> We set Isolation signals from Loader and reset EEPROM after system resuming
+	// from suspend mode.
+	// 2008.10.21.
+	//
+	write_nic_byte(dev, SYS_ISO_CTRL+1, 0xE8); // Isolation signals from Loader
+	//PlatformStallExecution(10000);
+	mdelay(10);
+	write_nic_byte(dev, SYS_FUNC_EN+1, 0x40);
+	write_nic_byte(dev, SYS_FUNC_EN+1, 0x50);
+
+	readbyte = read_nic_byte(dev, EFUSE_TEST+3);
+	write_nic_byte(dev, EFUSE_TEST+3, (readbyte | 0x80));
+	write_nic_byte(dev, EFUSE_TEST+3, 0x72);
+	write_nic_byte(dev, EFUSE_CLK, 0x03);
+
+	//
+	// Dump EFUSe at init time for later use
+	//
+	// Read EFUSE real map to shadow!!
+	EFUSE_ShadowMapUpdate(dev);
+
+	memcpy(hwinfo, (void*)&priv->EfuseMap[EFUSE_INIT_MAP][0], HWSET_MAX_SIZE_92S);
+	//RT_PRINT_DATA(COMP_INIT, DBG_LOUD, ("MAP \n"), hwinfo, HWSET_MAX_SIZE_92S);
+
+	//
+	// <Roger_Notes> Event though CR9346 regiser can verify whether Autoload is success or not, but we still
+	// double check ID codes for 92S here(e.g., due to HW GPIO polling fail issue).
+	// 2008.10.21.
+	//
+	ReadEFuse(dev, 0, 2, (unsigned char*) &EEPROMId);
+
+	if( EEPROMId != RTL8190_EEPROM_ID )
+	{
+		RT_TRACE(COMP_INIT, "EEPROM ID(%#x) is invalid!!\n", EEPROMId);
+		priv->AutoloadFailFlag=true;
+	}
+	else
+	{
+		priv->AutoloadFailFlag=false;
+	}
+
+       // Read IC Version && Channel Plan
+	if(!priv->AutoloadFailFlag)
+	{
+
+        	// VID, PID
+	    	ReadEFuse(dev, EEPROM_VID, 2, (unsigned char*) &priv->eeprom_vid);
+		ReadEFuse(dev, EEPROM_PID, 2, (unsigned char*) &priv->eeprom_pid);
+
+		// Version ID, Channel plan
+		ReadEFuse(dev, EEPROM_Version, 2, (unsigned char*) &usValue);
+		//pHalData->VersionID = (VERSION_8192S)(usValue&0x00ff);
+		priv->eeprom_ChannelPlan = (usValue&0xff00>>8);
+		priv->bTXPowerDataReadFromEEPORM = true;
+
+		// Customer ID, 0x00 and 0xff are reserved for Realtek.
+		ReadEFuse(dev, EEPROM_CustomID, 2, (unsigned char*) &usValue);
+		priv->eeprom_CustomerID = (u8)( usValue & 0xff);
+		priv->eeprom_SubCustomerID = (u8)((usValue & 0xff00)>>8);
+	}
+	else
+	{
+		priv->eeprom_vid = 0;
+		priv->eeprom_pid = 0;
+		priv->eeprom_ChannelPlan = 0;
+		priv->eeprom_CustomerID = 0;
+		priv->eeprom_SubCustomerID = 0;
+	}
+
+	RT_TRACE(COMP_INIT, "EEPROM Id = 0x%4x\n", EEPROMId);
+	RT_TRACE(COMP_INIT, "EEPROM VID = 0x%4x\n", priv->eeprom_vid);
+	RT_TRACE(COMP_INIT, "EEPROM PID = 0x%4x\n", priv->eeprom_pid);
+	//RT_TRACE(COMP_INIT, DBG_LOUD, ("EEPROM Version ID: 0x%2x\n", pHalData->VersionID));
+	RT_TRACE(COMP_INIT, "EEPROM Customer ID: 0x%2x\n", priv->eeprom_CustomerID);
+	RT_TRACE(COMP_INIT, "EEPROM SubCustomer ID: 0x%2x\n", priv->eeprom_SubCustomerID);
+	RT_TRACE(COMP_INIT, "EEPROM ChannelPlan = 0x%4x\n", priv->eeprom_ChannelPlan);
+
+
+	// Read USB optional function.
+	if(!priv->AutoloadFailFlag)
+	{
+		ReadEFuse(dev, EEPROM_USB_OPTIONAL, 1, (unsigned char*) &priv->EEPROMUsbOption);
+	}
+	else
+	{
+		priv->EEPROMUsbOption = EEPROM_USB_Default_OPTIONAL_FUNC;
+	}
+
+	RT_TRACE(COMP_INIT, "USB Option = %#x\n", priv->EEPROMUsbOption);
+
+
+	// Read USB PHY parameters.
+	if(!priv->AutoloadFailFlag)
+	{
+		ReadEFuse(dev, EEPROM_USB_PHY_PARA1, 5, (unsigned char*)UsbPhyParam);
+		for(i=0; i<5; i++)
+		{
+			priv->EEPROMUsbPhyParam[i] = UsbPhyParam[i];
+			RT_TRACE(COMP_INIT, "USB Param = index(%d) = %#x\n", i, priv->EEPROMUsbPhyParam[i]);
+		}
+	}
+	else
+	{
+		for(i=0; i<5; i++)
+		{
+			priv->EEPROMUsbPhyParam[i] = EEPROM_USB_Default_PHY_PARAM;
+			RT_TRACE(COMP_INIT, "USB Param = index(%d) = %#x\n", i, priv->EEPROMUsbPhyParam[i]);
+		}
+	}
+
+
+       //Read Permanent MAC address
+	if(!priv->AutoloadFailFlag)
+	{
+		u8			macaddr[6] = {0x00, 0xe1, 0x86, 0x4c, 0x92, 0x00};
+
+		ReadEFuse(dev, EEPROM_NODE_ADDRESS_BYTE_0, 6, (unsigned char*)macaddr);
+		for(i=0; i<6; i++)
+			dev->dev_addr[i] = macaddr[i];
+	}
+	else
+	{//Auto load fail
+
+		//<Roger_Notes> In this case, we random assigh MAC address here. 2008.10.15.
+		static u8 sMacAddr[6] = {0x00, 0xE0, 0x4C, 0x81, 0x92, 0x00};
+		u8	i;
+
+		//if(!Adapter->bInHctTest)
+                    //sMacAddr[5] = (u8)GetRandomNumber(1, 254);
+
+		for(i = 0; i < 6; i++)
+			dev->dev_addr[i] = sMacAddr[i];
+	}
+
+	//NicIFSetMacAddress(Adapter, Adapter->PermanentAddress);
+	write_nic_dword(dev, IDR0, ((u32*)dev->dev_addr)[0]);
+	write_nic_word(dev, IDR4, ((u16*)(dev->dev_addr + 4))[0]);
+
+	RT_TRACE(COMP_INIT, "ReadAdapterInfo8192SEFuse(), Permanent Address = %02x-%02x-%02x-%02x-%02x-%02x\n",
+			dev->dev_addr[0], dev->dev_addr[1],
+			dev->dev_addr[2], dev->dev_addr[3],
+			dev->dev_addr[4], dev->dev_addr[5]);
+
+	// 2007/11/15 MH For RTL8192USB we assign as 1T2R now.
+	priv->rf_type = RTL819X_DEFAULT_RF_TYPE;	// default : 1T2R
+
+#if (defined (RTL8192SU_FPGA_2MAC_VERIFICATION)||defined (RTL8192SU_ASIC_VERIFICATION))
+	priv->rf_chip = RF_6052;
+	priv->rf_type = RTL819X_DEFAULT_RF_TYPE;
+#else
+	priv->rf_chip = RF_8256;
+#endif
+
+	{
+		//
+		// Read antenna tx power offset of B/C/D to A  from EEPROM
+		// and read ThermalMeter from EEPROM
+		//
+		if(!priv->AutoloadFailFlag)
+		{
+			ReadEFuse(dev, EEPROM_PwDiff, 2, (unsigned char*) &usValue);
+			priv->EEPROMPwDiff = usValue&0x00ff;
+			priv->EEPROMThermalMeter = (usValue&0xff00)>>8;
+		}
+		else
+		{
+			priv->EEPROMPwDiff = EEPROM_Default_PwDiff;
+			priv->EEPROMThermalMeter = EEPROM_Default_ThermalMeter;
+		}
+
+		RT_TRACE(COMP_INIT, "PwDiff = %#x\n", priv->EEPROMPwDiff);
+		RT_TRACE(COMP_INIT, "ThermalMeter = %#x\n", priv->EEPROMThermalMeter);
+
+		priv->TSSI_13dBm = priv->EEPROMThermalMeter *100;
+
+		//
+		// Read Tx Power gain offset of legacy OFDM to HT rate.
+		// Read CrystalCap from EEPROM
+		//
+		if(!priv->AutoloadFailFlag)
+		{
+			ReadEFuse(dev, EEPROM_CrystalCap, 1, (unsigned char*) &usValue);
+			priv->EEPROMCrystalCap = (u8)((usValue&0xf0)>>4);
+		}
+		else
+		{
+			priv->EEPROMCrystalCap = EEPROM_Default_CrystalCap;
+		}
+
+		RT_TRACE(COMP_INIT, "CrystalCap = %#x\n", priv->EEPROMCrystalCap);
+
+		priv->EEPROMTxPowerDiff = EEPROM_Default_TxPowerDiff;
+		RT_TRACE(COMP_INIT, "TxPowerDiff = %d\n", priv->EEPROMTxPowerDiff);
+
+
+		//
+		// Get Tx Power Base.
+		//
+		if(!priv->AutoloadFailFlag)
+		{
+			ReadEFuse(dev, EEPROM_TxPowerBase, 1, (unsigned char*) &priv->EEPROMTxPwrBase );
+		}
+		else
+		{
+			priv->EEPROMTxPwrBase = EEPROM_Default_TxPowerBase;
+		}
+
+		RT_TRACE(COMP_INIT, "TxPwrBase = %#x\n", priv->EEPROMTxPwrBase);
+
+		//
+		// Get CustomerID(Boad Type)
+		// i.e., 0x0: RTL8188SU, 0x1: RTL8191SU, 0x2: RTL8192SU, 0x3: RTL8191GU.
+		// Others: Reserved. Default is 0x2: RTL8192SU.
+		//
+		if(!priv->AutoloadFailFlag)
+		{
+			ReadEFuse(dev, EEPROM_BoardType, 1, (unsigned char*) &priv->EEPROMBoardType );
+		}
+		else
+		{
+			priv->EEPROMBoardType = EEPROM_Default_BoardType;
+		}
+
+		RT_TRACE(COMP_INIT, "BoardType = %#x\n", priv->EEPROMBoardType);
+
+		//if(pHalData->EEPROM_Def_Ver == 0)
+		{
+#ifdef EEPROM_OLD_FORMAT_SUPPORT
+			//
+			// Get CCK Tx Power Index.
+			//
+			if(!priv->AutoloadFailFlag)
+			{
+				ReadEFuse(dev, EEPROM_TxPwIndex_CCK_24G, 14, (unsigned char*)CCKTxPwr);
+				for(i=0; i<14; i++)
+				{
+					RT_TRACE(COMP_INIT, "CCK 2.4G Tx Power Level, Index %d = 0x%02x\n", i, CCKTxPwr[i]);
+					priv->EEPROMTxPowerLevelCCK24G[i] = CCKTxPwr[i];
+				}
+			}
+			else
+			{ // Default setting for Empty EEPROM
+				for(i=0; i<14; i++)
+					priv->EEPROMTxPowerLevelCCK24G[i] = (u8)(EEPROM_Default_TxPower & 0xff);
+			}
+
+			//
+			// Get OFDM Tx Power Index.
+			//
+			if(!priv->AutoloadFailFlag)
+			{
+				ReadEFuse(dev, EEPROM_TxPwIndex_OFDM_24G, 14, (unsigned char*)OFDMTxPwr);
+				for(i=0; i<14; i++)
+				{
+					RT_TRACE(COMP_INIT, "OFDM 2.4G Tx Power Level, Index %d = 0x%02x\n", i, OFDMTxPwr[i]);
+					priv->EEPROMTxPowerLevelOFDM24G[i] = OFDMTxPwr[i];
+				}
+			}
+			else
+			{ // Default setting for Empty EEPROM
+				usValue = 0x10;
+				for(i=0; i<14; i++)
+					priv->EEPROMTxPowerLevelOFDM24G[i] = (u8)usValue;
+			}
+#else
+			// Please add code in the section!!!!
+			// And merge tx power difference section.
+#endif
+
+			//
+			// Get TSSI value for each path.
+			//
+			if(!priv->AutoloadFailFlag)
+			{
+				ReadEFuse(dev, EEPROM_TSSI_A, 2, (unsigned char*)&usValue);
+				priv->EEPROMTSSI_A = (u8)(usValue&0xff);
+				priv->EEPROMTSSI_B = (u8)((usValue&0xff00)>>8);
+			}
+			else
+			{ // Default setting for Empty EEPROM
+				priv->EEPROMTSSI_A = EEPROM_Default_TSSI;
+				priv->EEPROMTSSI_B = EEPROM_Default_TSSI;
+			}
+
+			RT_TRACE(COMP_INIT, "TSSI_A = %#x, TSSI_B = %#x\n",
+					priv->EEPROMTSSI_A, priv->EEPROMTSSI_B);
+
+			//
+			// Get Tx Power tracking mode.
+			//
+			if(!priv->AutoloadFailFlag)
+			{
+				ReadEFuse(dev, EEPROM_TxPwTkMode, 1, (unsigned char*)&priv->EEPROMTxPwrTkMode);
+			}
+			else
+			{ // Default setting for Empty EEPROM
+				priv->EEPROMTxPwrTkMode = EEPROM_Default_TxPwrTkMode;
+			}
+
+			RT_TRACE(COMP_INIT, "TxPwrTkMod = %#x\n", priv->EEPROMTxPwrTkMode);
+
+
+			// TODO: The following HT 2T Path A and B Power Index should be updated.!! Added by Roger, 2008.20.23.
+
+			//
+			// Get HT 2T Path A and B Power Index.
+			//
+			if(!priv->AutoloadFailFlag)
+			{
+				ReadEFuse(dev, EEPROM_HT2T_CH1_A, 6, (unsigned char*)HT2T_TxPwr);
+				for(i=0; i<6; i++)
+				{
+					priv->EEPROMHT2T_TxPwr[i] = HT2T_TxPwr[i];
+				}
+			}
+			else
+			{ // Default setting for Empty EEPROM
+				for(i=0; i<6; i++)
+				{
+					priv->EEPROMHT2T_TxPwr[i] = EEPROM_Default_HT2T_TxPwr;
+				}
+			}
+
+			for(i=0; i<6; i++)
+			{
+				RT_TRACE(COMP_INIT, "EEPROMHT2T_TxPwr, Index %d = 0x%02x\n",
+						i, priv->EEPROMHT2T_TxPwr[i]);
+			}
+		}
+
+#ifdef EEPROM_OLD_FORMAT_SUPPORT
+		//
+		// Update HAL variables.
+		//
+		for(i=0; i<14; i++)
+		{
+			priv->TxPowerLevelOFDM24G[i] = priv->EEPROMTxPowerLevelOFDM24G[i];
+			priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK24G[i];
+		}
+#else
+
+#endif
+		priv->TxPowerDiff = priv->EEPROMPwDiff;
+		// Antenna B gain offset to antenna A, bit0~3
+		priv->AntennaTxPwDiff[0] = (priv->EEPROMTxPowerDiff & 0xf);
+		// Antenna C gain offset to antenna A, bit4~7
+		priv->AntennaTxPwDiff[1] = ((priv->EEPROMTxPowerDiff & 0xf0)>>4);
+		// CrystalCap, bit12~15
+		priv->CrystalCap = priv->EEPROMCrystalCap;
+		// ThermalMeter, bit0~3 for RFIC1, bit4~7 for RFIC2
+		// 92U does not enable TX power tracking.
+		priv->ThermalMeter[0] = priv->EEPROMThermalMeter;
+	}
+
+	priv->LedStrategy = SW_LED_MODE0;
+
+	init_rate_adaptive(dev);
+
+	RT_TRACE(COMP_INIT, "<==== ReadAdapterInfo8192SEFuse\n");
+
+}
+#endif
+
+//
+//	Description:
+//		Read HW adapter information by E-Fuse or EEPROM according CR9346 reported.
+//
+//	Assumption:
+//		1. CR9346 regiser has verified.
+//		2. PASSIVE_LEVEL (USB interface)
+//
+//	Created by Roger, 2008.10.21.
+//
+void
+rtl8192SU_ReadAdapterInfo8192SUsb(struct net_device* dev)
+{
+	struct r8192_priv 	*priv = ieee80211_priv(dev);
+	u16			i,usValue;
+	u8			tmpU1b, tempval;
+	u16			EEPROMId;
+	u8			hwinfo[HWSET_MAX_SIZE_92S];
+	u8			rf_path, index;	// For EEPROM/EFUSE After V0.6_1117
+
+
+	RT_TRACE(COMP_INIT, "====> ReadAdapterInfo8192SUsb\n");
+
+	//
+	// <Roger_Note> The following operation are prevent Efuse leakage by turn on 2.5V.
+	// 2008.11.25.
+	//
+	tmpU1b = read_nic_byte(dev, EFUSE_TEST+3);
+	write_nic_byte(dev, EFUSE_TEST+3, tmpU1b|0x80);
+	//PlatformStallExecution(1000);
+	mdelay(10);
+	write_nic_byte(dev, EFUSE_TEST+3, (tmpU1b&(~BIT7)));
+
+	// Retrieve Chip version.
+	priv->card_8192_version = (VERSION_8192S)((read_nic_dword(dev, PMC_FSM)>>16)&0xF);
+	RT_TRACE(COMP_INIT, "Chip Version ID: 0x%2x\n", priv->card_8192_version);
+
+	switch(priv->card_8192_version)
+	{
+		case 0:
+			RT_TRACE(COMP_INIT, "Chip Version ID: VERSION_8192S_ACUT.\n");
+			break;
+		case 1:
+			RT_TRACE(COMP_INIT, "Chip Version ID: VERSION_8192S_BCUT.\n");
+			break;
+		case 2:
+			RT_TRACE(COMP_INIT, "Chip Version ID: VERSION_8192S_CCUT.\n");
+			break;
+		default:
+			RT_TRACE(COMP_INIT, "Unknown Chip Version!!\n");
+			priv->card_8192_version = VERSION_8192S_BCUT;
+			break;
+	}
+
+	//if (IS_BOOT_FROM_EEPROM(Adapter))
+	if(priv->EepromOrEfuse)
+	{	// Read frin EEPROM
+		write_nic_byte(dev, SYS_ISO_CTRL+1, 0xE8); // Isolation signals from Loader
+		//PlatformStallExecution(10000);
+		mdelay(10);
+		write_nic_byte(dev, PMC_FSM, 0x02); // Enable Loader Data Keep
+		// Read all Content from EEPROM or EFUSE.
+		for(i = 0; i < HWSET_MAX_SIZE_92S; i += 2)
+		{
+			usValue = eprom_read(dev, (u16) (i>>1));
+			*((u16*)(&hwinfo[i])) = usValue;
+		}
+	}
+	else if (!(priv->EepromOrEfuse))
+	{	// Read from EFUSE
+
+		//
+		// <Roger_Notes> We set Isolation signals from Loader and reset EEPROM after system resuming
+		// from suspend mode.
+		// 2008.10.21.
+		//
+		//PlatformEFIOWrite1Byte(Adapter, SYS_ISO_CTRL+1, 0xE8); // Isolation signals from Loader
+		//PlatformStallExecution(10000);
+		//PlatformEFIOWrite1Byte(Adapter, SYS_FUNC_EN+1, 0x40);
+		//PlatformEFIOWrite1Byte(Adapter, SYS_FUNC_EN+1, 0x50);
+
+		//tmpU1b = PlatformEFIORead1Byte(Adapter, EFUSE_TEST+3);
+		//PlatformEFIOWrite1Byte(Adapter, EFUSE_TEST+3, (tmpU1b | 0x80));
+		//PlatformEFIOWrite1Byte(Adapter, EFUSE_TEST+3, 0x72);
+		//PlatformEFIOWrite1Byte(Adapter, EFUSE_CLK, 0x03);
+
+		// Read EFUSE real map to shadow.
+		EFUSE_ShadowMapUpdate(dev);
+		memcpy(hwinfo, &priv->EfuseMap[EFUSE_INIT_MAP][0], HWSET_MAX_SIZE_92S);
+	}
+	else
+	{
+		RT_TRACE(COMP_INIT, "ReadAdapterInfo8192SUsb(): Invalid boot type!!\n");
+	}
+
+	//YJ,test,090106
+	//dump_buf(hwinfo,HWSET_MAX_SIZE_92S);
+	//
+	// <Roger_Notes> The following are EFUSE/EEPROM independent operations!!
+	//
+	//RT_PRINT_DATA(COMP_EFUSE, DBG_LOUD, ("MAP: \n"), hwinfo, HWSET_MAX_SIZE_92S);
+
+	//
+	// <Roger_Notes> Event though CR9346 regiser can verify whether Autoload is success or not, but we still
+	// double check ID codes for 92S here(e.g., due to HW GPIO polling fail issue).
+	// 2008.10.21.
+	//
+	EEPROMId = *((u16 *)&hwinfo[0]);
+
+	if( EEPROMId != RTL8190_EEPROM_ID )
+	{
+		RT_TRACE(COMP_INIT, "ID(%#x) is invalid!!\n", EEPROMId);
+		priv->bTXPowerDataReadFromEEPORM = FALSE;
+		priv->AutoloadFailFlag=TRUE;
+	}
+	else
+	{
+		priv->AutoloadFailFlag=FALSE;
+#if RTL8192SU_USE_PARAM_TXPWR
+		priv->bTXPowerDataReadFromEEPORM = FALSE;
+#else
+		priv->bTXPowerDataReadFromEEPORM = TRUE;
+#endif
+
+	}
+       // Read IC Version && Channel Plan
+	if(!priv->AutoloadFailFlag)
+	{
+        	// VID, PID
+	    	priv->eeprom_vid = *(u16 *)&hwinfo[EEPROM_VID];
+		priv->eeprom_pid = *(u16 *)&hwinfo[EEPROM_PID];
+		priv->bIgnoreDiffRateTxPowerOffset = false;	//cosa for test
+
+
+		// EEPROM Version ID, Channel plan
+		priv->EEPROMVersion = *(u8 *)&hwinfo[EEPROM_Version];
+		priv->eeprom_ChannelPlan = *(u8 *)&hwinfo[EEPROM_ChannelPlan];
+
+		// Customer ID, 0x00 and 0xff are reserved for Realtek.
+		priv->eeprom_CustomerID = *(u8 *)&hwinfo[EEPROM_CustomID];
+		priv->eeprom_SubCustomerID = *(u8 *)&hwinfo[EEPROM_SubCustomID];
+	}
+	else
+	{
+		//priv->eeprom_vid = 0;
+		//priv->eeprom_pid = 0;
+		//priv->EEPROMVersion = 0;
+		//priv->eeprom_ChannelPlan = 0;
+		//priv->eeprom_CustomerID = 0;
+		//priv->eeprom_SubCustomerID = 0;
+
+		rtl8192SU_ConfigAdapterInfo8192SForAutoLoadFail(dev);
+		return;
+	}
+
+
+	RT_TRACE(COMP_INIT, "EEPROM Id = 0x%4x\n", EEPROMId);
+	RT_TRACE(COMP_INIT, "EEPROM VID = 0x%4x\n", priv->eeprom_vid);
+	RT_TRACE(COMP_INIT, "EEPROM PID = 0x%4x\n", priv->eeprom_pid);
+	RT_TRACE(COMP_INIT, "EEPROM Version ID: 0x%2x\n", priv->EEPROMVersion);
+	RT_TRACE(COMP_INIT, "EEPROM Customer ID: 0x%2x\n", priv->eeprom_CustomerID);
+	RT_TRACE(COMP_INIT, "EEPROM SubCustomer ID: 0x%2x\n", priv->eeprom_SubCustomerID);
+	RT_TRACE(COMP_INIT, "EEPROM ChannelPlan = 0x%4x\n", priv->eeprom_ChannelPlan);
+	RT_TRACE(COMP_INIT, "bIgnoreDiffRateTxPowerOffset = %d\n", priv->bIgnoreDiffRateTxPowerOffset);
+
+
+	// Read USB optional function.
+	if(!priv->AutoloadFailFlag)
+	{
+		priv->EEPROMUsbOption = *(u8 *)&hwinfo[EEPROM_USB_OPTIONAL];
+	}
+	else
+	{
+		priv->EEPROMUsbOption = EEPROM_USB_Default_OPTIONAL_FUNC;
+	}
+
+
+	priv->EEPROMUsbEndPointNumber = rtl8192SU_UsbOptionToEndPointNumber((priv->EEPROMUsbOption&EEPROM_EP_NUMBER)>>3);
+
+	RT_TRACE(COMP_INIT, "USB Option = %#x\n", priv->EEPROMUsbOption);
+	RT_TRACE(COMP_INIT, "EndPoint Number = %#x\n", priv->EEPROMUsbEndPointNumber);
+
+#ifdef TO_DO_LIST
+	//
+	//  Decide CustomerID according to VID/DID or EEPROM
+	//
+	switch(pHalData->EEPROMCustomerID)
+	{
+		case EEPROM_CID_ALPHA:
+			pMgntInfo->CustomerID = RT_CID_819x_ALPHA;
+			break;
+
+		case EEPROM_CID_CAMEO:
+			pMgntInfo->CustomerID = RT_CID_819x_CAMEO;
+			break;
+
+		case EEPROM_CID_SITECOM:
+			pMgntInfo->CustomerID = RT_CID_819x_Sitecom;
+			RT_TRACE(COMP_INIT, DBG_LOUD, ("CustomerID = 0x%4x\n", pMgntInfo->CustomerID));
+
+			break;
+
+		case EEPROM_CID_WHQL:
+			Adapter->bInHctTest = TRUE;
+
+			pMgntInfo->bSupportTurboMode = FALSE;
+			pMgntInfo->bAutoTurboBy8186 = FALSE;
+
+			pMgntInfo->PowerSaveControl.bInactivePs = FALSE;
+			pMgntInfo->PowerSaveControl.bIPSModeBackup = FALSE;
+			pMgntInfo->PowerSaveControl.bLeisurePs = FALSE;
+			pMgntInfo->keepAliveLevel = 0;
+			break;
+
+		default:
+			pMgntInfo->CustomerID = RT_CID_DEFAULT;
+			break;
+
+	}
+
+	//
+	// Led mode
+	//
+	switch(pMgntInfo->CustomerID)
+	{
+		case RT_CID_DEFAULT:
+		case RT_CID_819x_ALPHA:
+			pHalData->LedStrategy = SW_LED_MODE1;
+			pHalData->bRegUseLed = TRUE;
+			pHalData->SwLed1.bLedOn = TRUE;
+			break;
+		case RT_CID_819x_CAMEO:
+			pHalData->LedStrategy = SW_LED_MODE1;
+			pHalData->bRegUseLed = TRUE;
+			break;
+
+		case RT_CID_819x_Sitecom:
+			pHalData->LedStrategy = SW_LED_MODE2;
+			pHalData->bRegUseLed = TRUE;
+			break;
+
+		default:
+			pHalData->LedStrategy = SW_LED_MODE0;
+			break;
+	}
+#endif
+
+	// Read USB PHY parameters.
+	for(i=0; i<5; i++)
+		priv->EEPROMUsbPhyParam[i] = *(u8 *)&hwinfo[EEPROM_USB_PHY_PARA1+i];
+
+	//RT_PRINT_DATA(COMP_EFUSE, DBG_LOUD, ("USB PHY Param: \n"), pHalData->EEPROMUsbPhyParam, 5);
+
+
+       //Read Permanent MAC address
+	for(i=0; i<6; i++)
+		dev->dev_addr[i] =  *(u8 *)&hwinfo[EEPROM_NODE_ADDRESS_BYTE_0+i];
+
+	//NicIFSetMacAddress(Adapter, Adapter->PermanentAddress);
+	write_nic_dword(dev, IDR0, ((u32*)dev->dev_addr)[0]);
+	write_nic_word(dev, IDR4, ((u16*)(dev->dev_addr + 4))[0]);
+
+	RT_TRACE(COMP_INIT, "ReadAdapterInfo8192SEFuse(), Permanent Address = %02x-%02x-%02x-%02x-%02x-%02x\n",
+			dev->dev_addr[0], dev->dev_addr[1],
+			dev->dev_addr[2], dev->dev_addr[3],
+			dev->dev_addr[4], dev->dev_addr[5]);
+
+	//
+	// Get CustomerID(Boad Type)
+	// i.e., 0x0: RTL8188SU, 0x1: RTL8191SU, 0x2: RTL8192SU, 0x3: RTL8191GU.
+	// Others: Reserved. Default is 0x2: RTL8192SU.
+	//
+	//if(!priv->AutoloadFailFlag)
+	//{
+		priv->EEPROMBoardType = *(u8 *)&hwinfo[EEPROM_BoardType];
+		priv->rf_type = rtl8192SU_BoardTypeToRFtype(dev, priv->EEPROMBoardType);
+	//}
+	//else
+	//{
+	//	priv->EEPROMBoardType = EEPROM_Default_BoardType;
+	//	priv->rf_type = RF_1T2R;
+	//}
+
+#if (defined (RTL8192SU_FPGA_2MAC_VERIFICATION)||defined (RTL8192SU_ASIC_VERIFICATION))
+	priv->rf_chip = RF_6052;
+#else
+	priv->rf_chip = RF_8256;
+#endif
+
+	priv->rf_chip = RF_6052;//lzm test
+	RT_TRACE(COMP_INIT, "BoardType = 0x%2x\n", priv->EEPROMBoardType);
+	RT_TRACE(COMP_INIT, "RF_Type = 0x%2x\n", priv->rf_type);
+
+	//
+	// Read antenna tx power offset of B/C/D to A  from EEPROM
+	// and read ThermalMeter from EEPROM
+	//
+	//if(!priv->AutoloadFailFlag)
+	{
+		priv->EEPROMTxPowerDiff = *(u8 *)&hwinfo[EEPROM_PwDiff];
+		priv->EEPROMThermalMeter = *(u8 *)&hwinfo[EEPROM_ThermalMeter];
+	}
+	//else
+	//{
+	//	priv->EEPROMTxPowerDiff = EEPROM_Default_PwDiff;
+	//	priv->EEPROMThermalMeter = EEPROM_Default_ThermalMeter;
+	//}
+
+	RT_TRACE(COMP_INIT, "PwDiff = %#x\n", priv->EEPROMTxPowerDiff);
+	RT_TRACE(COMP_INIT, "ThermalMeter = %#x\n", priv->EEPROMThermalMeter);
+
+	//
+	// Read Tx Power gain offset of legacy OFDM to HT rate.
+	// Read CrystalCap from EEPROM
+	//
+	//if(!priv->AutoloadFailFlag)
+	{
+		priv->EEPROMCrystalCap = *(u8 *)&hwinfo[EEPROM_CrystalCap];
+	}
+	//else
+	//{
+	//	priv->EEPROMCrystalCap = EEPROM_Default_CrystalCap;
+	//}
+
+	RT_TRACE(COMP_INIT, "CrystalCap = %#x\n", priv->EEPROMCrystalCap);
+
+	//
+	// Get Tx Power Base.
+	//
+	//if(!priv->AutoloadFailFlag)
+	{
+		priv->EEPROMTxPwrBase = *(u8 *)&hwinfo[EEPROM_TxPowerBase];
+	}
+	//else
+	//{
+	//	priv->EEPROMTxPwrBase = EEPROM_Default_TxPowerBase;
+	//}
+
+	RT_TRACE(COMP_INIT, "TxPwrBase = %#x\n", priv->EEPROMTxPwrBase);
+
+
+	//
+	// Get TSSI value for each path.
+	//
+	//if(!priv->AutoloadFailFlag)
+	{
+		priv->EEPROMTSSI_A = *(u8 *)&hwinfo[EEPROM_TSSI_A];
+		priv->EEPROMTSSI_B = *(u8 *)&hwinfo[EEPROM_TSSI_B];
+	}
+	//else
+	//{ // Default setting for Empty EEPROM
+	//	priv->EEPROMTSSI_A = EEPROM_Default_TSSI;
+	//	priv->EEPROMTSSI_B = EEPROM_Default_TSSI;
+	//}
+
+	RT_TRACE(COMP_INIT, "TSSI_A = %#x, TSSI_B = %#x\n", priv->EEPROMTSSI_A, priv->EEPROMTSSI_B);
+
+	//
+	// Get Tx Power tracking mode.
+	//
+	//if(!priv->AutoloadFailFlag)
+	{
+		priv->EEPROMTxPwrTkMode = *(u8 *)&hwinfo[EEPROM_TxPwTkMode];
+	}
+
+	RT_TRACE(COMP_INIT, "TxPwrTkMod = %#x\n", priv->EEPROMTxPwrTkMode);
+
+
+#ifdef EEPROM_OLD_FORMAT_SUPPORT
+
+	//
+	// <Roger_Notes> The following settings are EFUSE version dependence.
+	// So we need to adjust reading offset.
+	// 2008.11.22.
+	//
+	{
+			//
+			// Get HT 2T Path A and B Power Index.
+			//
+			//if(!priv->AutoloadFailFlag)
+			{
+				for(i=0; i<6; i++)
+				{
+				priv->EEPROMHT2T_TxPwr[i] = *(u8 *)&hwinfo[EEPROM_HT2T_CH1_A+i];
+				}
+			}
+
+		//RT_PRINT_DATA(COMP_EFUSE, "HT2T TxPwr: \n"), pHalData->EEPROMHT2T_TxPwr, 6);
+
+		//
+		// Get CCK and OFDM Tx Power Index.
+		//
+		//if(!priv->AutoloadFailFlag)
+		{
+			for(i=0; i<14; i++)
+			{
+				priv->EEPROMTxPowerLevelCCK24G[i] = *(u8 *)&hwinfo[EEPROM_TxPwIndex_CCK_24G+i];
+				priv->EEPROMTxPowerLevelOFDM24G[i] = *(u8 *)&hwinfo[EEPROM_TxPwIndex_OFDM_24G+i];
+			}
+		}
+
+		//RT_PRINT_DATA(COMP_EFUSE, DBG_LOUD, ("CCK 2.4G TxPwr: \n"), pHalData->EEPROMTxPowerLevelCCK24G, 14);
+		//RT_PRINT_DATA(COMP_EFUSE, DBG_LOUD, ("OFDM 2.4G TxPwr: \n"), pHalData->EEPROMTxPowerLevelOFDM24G, 14);
+
+		//
+		// Update HAL variables.
+		//
+		memcpy( priv->TxPowerLevelOFDM24G, priv->EEPROMTxPowerLevelOFDM24G, 14);
+		memcpy( priv->TxPowerLevelCCK, priv->EEPROMTxPowerLevelCCK24G, 14);
+		//RT_PRINT_DATA(COMP_EFUSE, DBG_LOUD, ("HAL CCK 2.4G TxPwr: \n"), pHalData->TxPowerLevelCCK, 14);
+		//RT_PRINT_DATA(COMP_EFUSE, DBG_LOUD, ("HAL OFDM 2.4G TxPwr: \n"), pHalData->TxPowerLevelOFDM24G, 14);
+
+	}
+#else // Support new version of EFUSE content, 2008.11.22.
+	{
+		//
+		// Buffer TxPwIdx(i.e., from offset 0x55~0x66, total 18Bytes)
+		// Update CCK, OFDM (1T/2T)Tx Power Index from above buffer.
+		//
+
+		//
+		// Get Tx Power Level by Channel
+		//
+		//if(!priv->AutoloadFailFlag)
+		{
+			// Read Tx power of Channel 1 ~ 14 from EFUSE.
+			// 92S suupport RF A & B
+			for (rf_path = 0; rf_path < 2; rf_path++)
+			{
+				for (i = 0; i < 3; i++)
+				{
+					// Read CCK RF A & B Tx power
+					priv->RfCckChnlAreaTxPwr[rf_path][i] =
+					hwinfo[EEPROM_TxPwIndex+rf_path*3+i];
+
+					// Read OFDM RF A & B Tx power for 1T
+					priv->RfOfdmChnlAreaTxPwr1T[rf_path][i] =
+					hwinfo[EEPROM_TxPwIndex+6+rf_path*3+i];
+
+					// Read OFDM RF A & B Tx power for 2T
+					priv->RfOfdmChnlAreaTxPwr2T[rf_path][i] =
+					hwinfo[EEPROM_TxPwIndex+12+rf_path*3+i];
+				}
+			}
+
+		}
+//
+		// Update Tx Power HAL variables.
+//
+		for (rf_path = 0; rf_path < 2; rf_path++)
+		{
+			for (i = 0; i < 3; i++)
+			{
+				RT_TRACE((COMP_INIT),  "CCK RF-%d CHan_Area-%d = 0x%x\n",  rf_path, i,
+				priv->RfCckChnlAreaTxPwr[rf_path][i]);
+				RT_TRACE((COMP_INIT), "OFDM-1T RF-%d CHan_Area-%d = 0x%x\n",  rf_path, i,
+				priv->RfOfdmChnlAreaTxPwr1T[rf_path][i]);
+				RT_TRACE((COMP_INIT), "OFDM-2T RF-%d CHan_Area-%d = 0x%x\n",  rf_path, i, priv->RfOfdmChnlAreaTxPwr2T[rf_path][i]);
+			}
+
+			// Assign dedicated channel tx power
+			for(i=0; i<14; i++)	// channel 1~3 use the same Tx Power Level.
+			{
+				if (i < 3)			// Cjanel 1-3
+					index = 0;
+				else if (i < 9)		// Channel 4-9
+					index = 1;
+				else				// Channel 10-14
+					index = 2;
+
+				// Record A & B CCK /OFDM - 1T/2T Channel area tx power
+				priv->RfTxPwrLevelCck[rf_path][i]  =
+				priv->RfCckChnlAreaTxPwr[rf_path][index];
+				priv->RfTxPwrLevelOfdm1T[rf_path][i]  =
+				priv->RfOfdmChnlAreaTxPwr1T[rf_path][index];
+				priv->RfTxPwrLevelOfdm2T[rf_path][i]  =
+				priv->RfOfdmChnlAreaTxPwr2T[rf_path][index];
+				if (rf_path == 0)
+				{
+					priv->TxPowerLevelOFDM24G[i] = priv->RfTxPwrLevelOfdm1T[rf_path][i] ;
+					priv->TxPowerLevelCCK[i] = priv->RfTxPwrLevelCck[rf_path][i];
+				}
+			}
+
+			for(i=0; i<14; i++)
+			{
+				RT_TRACE((COMP_INIT),
+				"Rf-%d TxPwr CH-%d CCK OFDM_1T OFDM_2T= 0x%x/0x%x/0x%x\n",
+				rf_path, i, priv->RfTxPwrLevelCck[rf_path][i],
+				priv->RfTxPwrLevelOfdm1T[rf_path][i] ,
+				priv->RfTxPwrLevelOfdm2T[rf_path][i] );
+			}
+		}
+	}
+
+	//
+	// 2009/02/09 Cosa add for new EEPROM format
+	//
+	for(i=0; i<14; i++)	// channel 1~3 use the same Tx Power Level.
+	{
+		// Read tx power difference between HT OFDM 20/40 MHZ
+		if (i < 3)			// Cjanel 1-3
+			index = 0;
+		else if (i < 9)		// Channel 4-9
+			index = 1;
+		else				// Channel 10-14
+			index = 2;
+
+		tempval = (*(u8 *)&hwinfo[EEPROM_TX_PWR_HT20_DIFF+index])&0xff;
+		priv->TxPwrHt20Diff[RF90_PATH_A][i] = (tempval&0xF);
+		priv->TxPwrHt20Diff[RF90_PATH_B][i] = ((tempval>>4)&0xF);
+
+		// Read OFDM<->HT tx power diff
+		if (i < 3)			// Cjanel 1-3
+			tempval = (*(u8 *)&hwinfo[EEPROM_TX_PWR_OFDM_DIFF])&0xff;
+		else if (i < 9)		// Channel 4-9
+			tempval = (*(u8 *)&hwinfo[EEPROM_PwDiff])&0xff;
+		else				// Channel 10-14
+			tempval = (*(u8 *)&hwinfo[EEPROM_TX_PWR_OFDM_DIFF+1])&0xff;
+
+		//cosa tempval = (*(u1Byte *)&hwinfo[EEPROM_TX_PWR_OFDM_DIFF+index])&0xff;
+		priv->TxPwrLegacyHtDiff[RF90_PATH_A][i] = (tempval&0xF);
+		priv->TxPwrLegacyHtDiff[RF90_PATH_B][i] = ((tempval>>4)&0xF);
+
+		//
+		// Read Band Edge tx power offset and check if user enable the ability
+		//
+		// HT 40 band edge channel
+		tempval = (*(u8 *)&hwinfo[EEPROM_TX_PWR_BAND_EDGE])&0xff;
+		priv->TxPwrbandEdgeHt40[RF90_PATH_A][0] = (tempval&0xF); 		// Band edge low channel
+		priv->TxPwrbandEdgeHt40[RF90_PATH_A][1] =  ((tempval>>4)&0xF);	// Band edge high channel
+		tempval = (*(u8 *)&hwinfo[EEPROM_TX_PWR_BAND_EDGE+1])&0xff;
+		priv->TxPwrbandEdgeHt40[RF90_PATH_B][0] = (tempval&0xF); 		// Band edge low channel
+		priv->TxPwrbandEdgeHt40[RF90_PATH_B][1] =  ((tempval>>4)&0xF);	// Band edge high channel
+		// HT 20 band edge channel
+		tempval = (*(u8 *)&hwinfo[EEPROM_TX_PWR_BAND_EDGE+2])&0xff;
+		priv->TxPwrbandEdgeHt20[RF90_PATH_A][0] = (tempval&0xF); 		// Band edge low channel
+		priv->TxPwrbandEdgeHt20[RF90_PATH_A][1] =  ((tempval>>4)&0xF);	// Band edge high channel
+		tempval = (*(u8 *)&hwinfo[EEPROM_TX_PWR_BAND_EDGE+3])&0xff;
+		priv->TxPwrbandEdgeHt20[RF90_PATH_B][0] = (tempval&0xF); 		// Band edge low channel
+		priv->TxPwrbandEdgeHt20[RF90_PATH_B][1] =  ((tempval>>4)&0xF);	// Band edge high channel
+		// OFDM band edge channel
+		tempval = (*(u8 *)&hwinfo[EEPROM_TX_PWR_BAND_EDGE+4])&0xff;
+		priv->TxPwrbandEdgeLegacyOfdm[RF90_PATH_A][0] = (tempval&0xF); 		// Band edge low channel
+		priv->TxPwrbandEdgeLegacyOfdm[RF90_PATH_A][1] =  ((tempval>>4)&0xF);	// Band edge high channel
+		tempval = (*(u8 *)&hwinfo[EEPROM_TX_PWR_BAND_EDGE+5])&0xff;
+		priv->TxPwrbandEdgeLegacyOfdm[RF90_PATH_B][0] = (tempval&0xF); 		// Band edge low channel
+		priv->TxPwrbandEdgeLegacyOfdm[RF90_PATH_B][1] =  ((tempval>>4)&0xF);	// Band edge high channel
+
+		priv->TxPwrbandEdgeFlag = (*(u8 *)&hwinfo[TX_PWR_BAND_EDGE_CHK]);
+	}
+
+	for(i=0; i<14; i++)
+		RT_TRACE(COMP_INIT, "RF-A Ht20 to HT40 Diff[%d] = 0x%x\n", i, priv->TxPwrHt20Diff[RF90_PATH_A][i]);
+	for(i=0; i<14; i++)
+		RT_TRACE(COMP_INIT,  "RF-A Legacy to Ht40 Diff[%d] = 0x%x\n", i, priv->TxPwrLegacyHtDiff[RF90_PATH_A][i]);
+	for(i=0; i<14; i++)
+		RT_TRACE(COMP_INIT,  "RF-B Ht20 to HT40 Diff[%d] = 0x%x\n", i, priv->TxPwrHt20Diff[RF90_PATH_B][i]);
+	for(i=0; i<14; i++)
+		RT_TRACE(COMP_INIT,  "RF-B Legacy to HT40 Diff[%d] = 0x%x\n", i, priv->TxPwrLegacyHtDiff[RF90_PATH_B][i]);
+	RT_TRACE(COMP_INIT, "RF-A HT40 band-edge low/high power diff = 0x%x/0x%x\n",
+		priv->TxPwrbandEdgeHt40[RF90_PATH_A][0],
+		priv->TxPwrbandEdgeHt40[RF90_PATH_A][1]);
+	RT_TRACE((COMP_INIT&COMP_DBG), "RF-B HT40 band-edge low/high power diff = 0x%x/0x%x\n",
+		priv->TxPwrbandEdgeHt40[RF90_PATH_B][0],
+		priv->TxPwrbandEdgeHt40[RF90_PATH_B][1]);
+
+	RT_TRACE((COMP_INIT&COMP_DBG), "RF-A HT20 band-edge low/high power diff = 0x%x/0x%x\n",
+		priv->TxPwrbandEdgeHt20[RF90_PATH_A][0],
+		priv->TxPwrbandEdgeHt20[RF90_PATH_A][1]);
+	RT_TRACE((COMP_INIT&COMP_DBG), "RF-B HT20 band-edge low/high power diff = 0x%x/0x%x\n",
+		priv->TxPwrbandEdgeHt20[RF90_PATH_B][0],
+		priv->TxPwrbandEdgeHt20[RF90_PATH_B][1]);
+
+	RT_TRACE((COMP_INIT&COMP_DBG), "RF-A OFDM band-edge low/high power diff = 0x%x/0x%x\n",
+		priv->TxPwrbandEdgeLegacyOfdm[RF90_PATH_A][0],
+		priv->TxPwrbandEdgeLegacyOfdm[RF90_PATH_A][1]);
+	RT_TRACE((COMP_INIT&COMP_DBG), "RF-B OFDM band-edge low/high power diff = 0x%x/0x%x\n",
+		priv->TxPwrbandEdgeLegacyOfdm[RF90_PATH_B][0],
+		priv->TxPwrbandEdgeLegacyOfdm[RF90_PATH_B][1]);
+	RT_TRACE((COMP_INIT&COMP_DBG), "Band-edge enable flag = %d\n", priv->TxPwrbandEdgeFlag);
+#endif
+
+	//
+	// Update remained HAL variables.
+	//
+	priv->TSSI_13dBm = priv->EEPROMThermalMeter *100;
+	priv->LegacyHTTxPowerDiff = priv->EEPROMTxPowerDiff;
+	priv->TxPowerDiff = priv->EEPROMTxPowerDiff;
+	//priv->AntennaTxPwDiff[0] = (priv->EEPROMTxPowerDiff & 0xf);// Antenna B gain offset to antenna A, bit[3:0]
+	//priv->AntennaTxPwDiff[1] = ((priv->EEPROMTxPowerDiff & 0xf0)>>4);// Antenna C gain offset to antenna A, bit[7:4]
+	priv->CrystalCap = priv->EEPROMCrystalCap;	// CrystalCap, bit[15:12]
+	priv->ThermalMeter[0] = (priv->EEPROMThermalMeter&0x1f);// ThermalMeter, bit0~3 for RFIC1, bit4~7 for RFIC2
+	priv->LedStrategy = SW_LED_MODE0;
+
+	init_rate_adaptive(dev);
+
+	RT_TRACE(COMP_INIT, "<==== ReadAdapterInfo8192SUsb\n");
+
+	//return RT_STATUS_SUCCESS;
+}
+
+
+//
+//	Description:
+//		Read HW adapter information by E-Fuse or EEPROM according CR9346 reported.
+//
+//	Assumption:
+//		1. CR9346 regiser has verified.
+//		2. PASSIVE_LEVEL (USB interface)
+//
+//	Created by Roger, 2008.10.21.
+//
+static void rtl8192SU_read_eeprom_info(struct net_device *dev)
+{
+	struct r8192_priv 	*priv = ieee80211_priv(dev);
+	u8			tmpU1b;
+
+	RT_TRACE(COMP_INIT, "====> ReadAdapterInfo8192SUsb\n");
+
+	// Retrieve Chip version.
+	priv->card_8192_version = (VERSION_8192S)((read_nic_dword(dev, PMC_FSM)>>16)&0xF);
+	RT_TRACE(COMP_INIT, "Chip Version ID: 0x%2x\n", priv->card_8192_version);
+
+	tmpU1b = read_nic_byte(dev, EPROM_CMD);//CR9346
+
+	// To check system boot selection.
+	if (tmpU1b & CmdEERPOMSEL)
+	{
+		RT_TRACE(COMP_INIT, "Boot from EEPROM\n");
+		priv->EepromOrEfuse = TRUE;
+	}
+	else
+	{
+		RT_TRACE(COMP_INIT, "Boot from EFUSE\n");
+		priv->EepromOrEfuse = FALSE;
+	}
+
+	// To check autoload success or not.
+	if (tmpU1b & CmdEEPROM_En)
+	{
+		RT_TRACE(COMP_INIT, "Autoload OK!!\n");
+		priv->AutoloadFailFlag=FALSE;
+		rtl8192SU_ReadAdapterInfo8192SUsb(dev);//eeprom or e-fuse
+	}
+	else
+	{ // Auto load fail.
+		RT_TRACE(COMP_INIT, "AutoLoad Fail reported from CR9346!!\n");
+		priv->AutoloadFailFlag=TRUE;
+		rtl8192SU_ConfigAdapterInfo8192SForAutoLoadFail(dev);
+
+		//if (IS_BOOT_FROM_EFUSE(Adapter))
+		if(!priv->EepromOrEfuse)
+		{
+			RT_TRACE(COMP_INIT, "Update shadow map for EFuse future use!!\n");
+			EFUSE_ShadowMapUpdate(dev);
+		}
+	}
+#ifdef TO_DO_LIST
+	if((priv->RegChannelPlan >= RT_CHANNEL_DOMAIN_MAX) || (pHalData->EEPROMChannelPlan & EEPROM_CHANNEL_PLAN_BY_HW_MASK))
+	{
+		pMgntInfo->ChannelPlan = HalMapChannelPlan8192S(Adapter, (pHalData->EEPROMChannelPlan & (~(EEPROM_CHANNEL_PLAN_BY_HW_MASK))));
+		pMgntInfo->bChnlPlanFromHW = (pHalData->EEPROMChannelPlan & EEPROM_CHANNEL_PLAN_BY_HW_MASK) ? TRUE : FALSE; // User cannot change  channel plan.
+	}
+	else
+	{
+		pMgntInfo->ChannelPlan = (RT_CHANNEL_DOMAIN)pMgntInfo->RegChannelPlan;
+	}
+
+	switch(pMgntInfo->ChannelPlan)
+	{
+		case RT_CHANNEL_DOMAIN_GLOBAL_DOAMIN:
+		{
+			PRT_DOT11D_INFO	pDot11dInfo = GET_DOT11D_INFO(pMgntInfo);
+
+			pDot11dInfo->bEnabled = TRUE;
+		}
+		RT_TRACE(COMP_INIT, DBG_LOUD, ("ReadAdapterInfo8187(): Enable dot11d when RT_CHANNEL_DOMAIN_GLOBAL_DOAMIN!\n"));
+		break;
+	}
+
+	RT_TRACE(COMP_INIT, DBG_LOUD, ("RegChannelPlan(%d) EEPROMChannelPlan(%d)", pMgntInfo->RegChannelPlan, pHalData->EEPROMChannelPlan));
+	RT_TRACE(COMP_INIT, DBG_LOUD, ("ChannelPlan = %d\n" , pMgntInfo->ChannelPlan));
+
+	RT_TRACE(COMP_INIT, DBG_LOUD, ("<==== ReadAdapterInfo8192S\n"));
+#endif
+
+	RT_TRACE(COMP_INIT, "<==== ReadAdapterInfo8192SUsb\n");
+
+	//return RT_STATUS_SUCCESS;
+}
+#else
+static void rtl8192_read_eeprom_info(struct net_device* dev)
+{
+	u16 wEPROM_ID = 0;
+	u8 bMac_Tmp_Addr[6] = {0x00, 0xe0, 0x4c, 0x00, 0x00, 0x02};
+	u8 bLoad_From_EEPOM = false;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u16 tmpValue = 0;
+	RT_TRACE(COMP_EPROM, "===========>%s()\n", __FUNCTION__);
+	wEPROM_ID = eprom_read(dev, 0); //first read EEPROM ID out;
+	RT_TRACE(COMP_EPROM, "EEPROM ID is 0x%x\n", wEPROM_ID);
+
+	if (wEPROM_ID != RTL8190_EEPROM_ID)
+	{
+		RT_TRACE(COMP_ERR, "EEPROM ID is invalid(is 0x%x(should be 0x%x)\n", wEPROM_ID, RTL8190_EEPROM_ID);
+	}
+	else
+		bLoad_From_EEPOM = true;
+
+	if (bLoad_From_EEPOM)
+	{
+		tmpValue = eprom_read(dev, (EEPROM_VID>>1));
+		priv->eeprom_vid = endian_swap(&tmpValue);
+		priv->eeprom_pid = eprom_read(dev, (EEPROM_PID>>1));
+		tmpValue = eprom_read(dev, (EEPROM_ChannelPlan>>1));
+		priv->eeprom_ChannelPlan =((tmpValue&0xff00)>>8);
+		priv->btxpowerdata_readfromEEPORM = true;
+		priv->eeprom_CustomerID = eprom_read(dev, (EEPROM_Customer_ID>>1)) >>8;
+	}
+	else
+	{
+		priv->eeprom_vid = 0;
+		priv->eeprom_pid = 0;
+		priv->card_8192_version = VERSION_819xU_B;
+		priv->eeprom_ChannelPlan = 0;
+		priv->eeprom_CustomerID = 0;
+	}
+	RT_TRACE(COMP_EPROM, "vid:0x%4x, pid:0x%4x, CustomID:0x%2x, ChanPlan:0x%x\n", priv->eeprom_vid, priv->eeprom_pid, priv->eeprom_CustomerID, priv->eeprom_ChannelPlan);
+	//set channelplan from eeprom
+	priv->ChannelPlan = priv->eeprom_ChannelPlan;
+	if (bLoad_From_EEPOM)
+	{
+		int i;
+		for (i=0; i<6; i+=2)
+		{
+			u16 tmp = 0;
+			tmp = eprom_read(dev, (u16)((EEPROM_NODE_ADDRESS_BYTE_0 + i)>>1));
+			*(u16*)(&dev->dev_addr[i]) = tmp;
+		}
+	}
+	else
+	{
+		memcpy(dev->dev_addr, bMac_Tmp_Addr, 6);
+		//should I set IDR0 here?
+	}
+	RT_TRACE(COMP_EPROM, "MAC addr:"MAC_FMT"\n", MAC_ARG(dev->dev_addr));
+	priv->rf_type = RTL819X_DEFAULT_RF_TYPE; //default 1T2R
+	priv->rf_chip = RF_8256;
+
+	if (priv->card_8192_version == (u8)VERSION_819xU_A)
+	{
+		//read Tx power gain offset of legacy OFDM to HT rate
+		if (bLoad_From_EEPOM)
+			priv->EEPROMTxPowerDiff = (eprom_read(dev, (EEPROM_TxPowerDiff>>1))&0xff00) >> 8;
+		else
+			priv->EEPROMTxPowerDiff = EEPROM_Default_TxPower;
+		RT_TRACE(COMP_EPROM, "TxPowerDiff:%d\n", priv->EEPROMTxPowerDiff);
+		//read ThermalMeter from EEPROM
+		if (bLoad_From_EEPOM)
+			priv->EEPROMThermalMeter = (u8)(eprom_read(dev, (EEPROM_ThermalMeter>>1))&0x00ff);
+		else
+			priv->EEPROMThermalMeter = EEPROM_Default_ThermalMeter;
+		RT_TRACE(COMP_EPROM, "ThermalMeter:%d\n", priv->EEPROMThermalMeter);
+		//vivi, for tx power track
+		priv->TSSI_13dBm = priv->EEPROMThermalMeter *100;
+		//read antenna tx power offset of B/C/D to A from EEPROM
+		if (bLoad_From_EEPOM)
+			priv->EEPROMPwDiff = (eprom_read(dev, (EEPROM_PwDiff>>1))&0x0f00)>>8;
+		else
+			priv->EEPROMPwDiff = EEPROM_Default_PwDiff;
+		RT_TRACE(COMP_EPROM, "TxPwDiff:%d\n", priv->EEPROMPwDiff);
+		// Read CrystalCap from EEPROM
+		if (bLoad_From_EEPOM)
+			priv->EEPROMCrystalCap = (eprom_read(dev, (EEPROM_CrystalCap>>1))&0x0f);
+		else
+			priv->EEPROMCrystalCap = EEPROM_Default_CrystalCap;
+		RT_TRACE(COMP_EPROM, "CrystalCap = %d\n", priv->EEPROMCrystalCap);
+		//get per-channel Tx power level
+		if (bLoad_From_EEPOM)
+			priv->EEPROM_Def_Ver = (eprom_read(dev, (EEPROM_TxPwIndex_Ver>>1))&0xff00)>>8;
+		else
+			priv->EEPROM_Def_Ver = 1;
+		RT_TRACE(COMP_EPROM, "EEPROM_DEF_VER:%d\n", priv->EEPROM_Def_Ver);
+		if (priv->EEPROM_Def_Ver == 0) //old eeprom definition
+		{
+			int i;
+			if (bLoad_From_EEPOM)
+				priv->EEPROMTxPowerLevelCCK = (eprom_read(dev, (EEPROM_TxPwIndex_CCK>>1))&0xff) >> 8;
+			else
+				priv->EEPROMTxPowerLevelCCK = 0x10;
+			RT_TRACE(COMP_EPROM, "CCK Tx Power Levl: 0x%02x\n", priv->EEPROMTxPowerLevelCCK);
+			for (i=0; i<3; i++)
+			{
+				if (bLoad_From_EEPOM)
+				{
+					tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_OFDM_24G+i)>>1);
+					if (((EEPROM_TxPwIndex_OFDM_24G+i) % 2) == 0)
+						tmpValue = tmpValue & 0x00ff;
+					else
+						tmpValue = (tmpValue & 0xff00) >> 8;
+				}
+				else
+					tmpValue = 0x10;
+				priv->EEPROMTxPowerLevelOFDM24G[i] = (u8) tmpValue;
+				RT_TRACE(COMP_EPROM, "OFDM 2.4G Tx Power Level, Index %d = 0x%02x\n", i, priv->EEPROMTxPowerLevelCCK);
+			}
+		}//end if EEPROM_DEF_VER == 0
+		else if (priv->EEPROM_Def_Ver == 1)
+		{
+			if (bLoad_From_EEPOM)
+			{
+				tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_CCK_V1>>1));
+				tmpValue = (tmpValue & 0xff00) >> 8;
+			}
+			else
+				tmpValue = 0x10;
+			priv->EEPROMTxPowerLevelCCK_V1[0] = (u8)tmpValue;
+
+			if (bLoad_From_EEPOM)
+				tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_CCK_V1 + 2)>>1);
+			else
+				tmpValue = 0x1010;
+			*((u16*)(&priv->EEPROMTxPowerLevelCCK_V1[1])) = tmpValue;
+			if (bLoad_From_EEPOM)
+				tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_OFDM_24G_V1>>1));
+			else
+				tmpValue = 0x1010;
+			*((u16*)(&priv->EEPROMTxPowerLevelOFDM24G[0])) = tmpValue;
+			if (bLoad_From_EEPOM)
+				tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_OFDM_24G_V1+2)>>1);
+			else
+				tmpValue = 0x10;
+			priv->EEPROMTxPowerLevelOFDM24G[2] = (u8)tmpValue;
+		}//endif EEPROM_Def_Ver == 1
+
+		//update HAL variables
+		//
+		{
+			int i;
+			for (i=0; i<14; i++)
+			{
+				if (i<=3)
+					priv->TxPowerLevelOFDM24G[i] = priv->EEPROMTxPowerLevelOFDM24G[0];
+				else if (i>=4 && i<=9)
+					priv->TxPowerLevelOFDM24G[i] = priv->EEPROMTxPowerLevelOFDM24G[1];
+				else
+					priv->TxPowerLevelOFDM24G[i] = priv->EEPROMTxPowerLevelOFDM24G[2];
+			}
+
+			for (i=0; i<14; i++)
+			{
+				if (priv->EEPROM_Def_Ver == 0)
+				{
+					if (i<=3)
+						priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelOFDM24G[0] + (priv->EEPROMTxPowerLevelCCK - priv->EEPROMTxPowerLevelOFDM24G[1]);
+					else if (i>=4 && i<=9)
+						priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK;
+					else
+						priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelOFDM24G[2] + (priv->EEPROMTxPowerLevelCCK - priv->EEPROMTxPowerLevelOFDM24G[1]);
+				}
+				else if (priv->EEPROM_Def_Ver == 1)
+				{
+					if (i<=3)
+						priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK_V1[0];
+					else if (i>=4 && i<=9)
+						priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK_V1[1];
+					else
+						priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK_V1[2];
+				}
+			}
+		}//end update HAL variables
+		priv->TxPowerDiff = priv->EEPROMPwDiff;
+// Antenna B gain offset to antenna A, bit0~3
+		priv->AntennaTxPwDiff[0] = (priv->EEPROMTxPowerDiff & 0xf);
+		// Antenna C gain offset to antenna A, bit4~7
+		priv->AntennaTxPwDiff[1] = ((priv->EEPROMTxPowerDiff & 0xf0)>>4);
+		// CrystalCap, bit12~15
+		priv->CrystalCap = priv->EEPROMCrystalCap;
+		// ThermalMeter, bit0~3 for RFIC1, bit4~7 for RFIC2
+		// 92U does not enable TX power tracking.
+		priv->ThermalMeter[0] = priv->EEPROMThermalMeter;
+	}//end if VersionID == VERSION_819xU_A
+
+//added by vivi, for dlink led, 20080416
+	switch(priv->eeprom_CustomerID)
+	{
+		case EEPROM_CID_RUNTOP:
+			priv->CustomerID = RT_CID_819x_RUNTOP;
+			break;
+
+		case EEPROM_CID_DLINK:
+			priv->CustomerID = RT_CID_DLINK;
+			break;
+
+		default:
+			priv->CustomerID = RT_CID_DEFAULT;
+			break;
+
+	}
+
+	switch(priv->CustomerID)
+	{
+		case RT_CID_819x_RUNTOP:
+			priv->LedStrategy = SW_LED_MODE2;
+			break;
+
+ 		case RT_CID_DLINK:
+			priv->LedStrategy = SW_LED_MODE4;
+			break;
+
+		default:
+			priv->LedStrategy = SW_LED_MODE0;
+			break;
+
+	}
+
+
+	if(priv->rf_type == RF_1T2R)
+	{
+		RT_TRACE(COMP_EPROM, "\n1T2R config\n");
+	}
+	else
+	{
+		RT_TRACE(COMP_EPROM, "\n2T4R config\n");
+	}
+
+	// 2008/01/16 MH We can only know RF type in the function. So we have to init
+	// DIG RATR table again.
+	init_rate_adaptive(dev);
+	//we need init DIG RATR table here again.
+
+	RT_TRACE(COMP_EPROM, "<===========%s()\n", __FUNCTION__);
+	return;
+}
+#endif
+
+short rtl8192_get_channel_map(struct net_device * dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+#ifdef ENABLE_DOT11D
+	if(priv->ChannelPlan > COUNTRY_CODE_GLOBAL_DOMAIN){
+		printk("rtl8180_init:Error channel plan! Set to default.\n");
+		priv->ChannelPlan= 0;
+	}
+	RT_TRACE(COMP_INIT, "Channel plan is %d\n",priv->ChannelPlan);
+
+	rtl819x_set_channel_map(priv->ChannelPlan, priv);
+#else
+	int ch,i;
+	//Set Default Channel Plan
+	if(!channels){
+		DMESG("No channels, aborting");
+		return -1;
+	}
+	ch=channels;
+	priv->ChannelPlan= 0;//hikaru
+	 // set channels 1..14 allowed in given locale
+	for (i=1; i<=14; i++) {
+		(priv->ieee80211->channel_map)[i] = (u8)(ch & 0x01);
+		ch >>= 1;
+	}
+#endif
+	return 0;
+}
+
+short rtl8192_init(struct net_device *dev)
+{
+
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+#ifndef RTL8192SU
+	memset(&(priv->stats),0,sizeof(struct Stats));
+	memset(priv->txqueue_to_outpipemap,0,9);
+#ifdef PIPE12
+	{
+		int i=0;
+		u8 queuetopipe[]={3,2,1,0,4,8,7,6,5};
+		memcpy(priv->txqueue_to_outpipemap,queuetopipe,9);
+/*		for(i=0;i<9;i++)
+			printk("%d ",priv->txqueue_to_outpipemap[i]);
+		printk("\n");*/
+	}
+#else
+	{
+		u8 queuetopipe[]={3,2,1,0,4,4,0,4,4};
+		memcpy(priv->txqueue_to_outpipemap,queuetopipe,9);
+/*		for(i=0;i<9;i++)
+			printk("%d ",priv->txqueue_to_outpipemap[i]);
+		printk("\n");*/
+	}
+#endif
+#endif
+	rtl8192_init_priv_variable(dev);
+	rtl8192_init_priv_lock(priv);
+	rtl8192_init_priv_task(dev);
+	rtl8192_get_eeprom_size(dev);
+	priv->ops->rtl819x_read_eeprom_info(dev);
+	rtl8192_get_channel_map(dev);
+	init_hal_dm(dev);
+	init_timer(&priv->watch_dog_timer);
+	priv->watch_dog_timer.data = (unsigned long)dev;
+	priv->watch_dog_timer.function = watch_dog_timer_callback;
+
+	//rtl8192_adapter_start(dev);
+#ifdef DEBUG_EPROM
+	dump_eprom(dev);
+#endif
+	return 0;
+}
+
+/******************************************************************************
+ *function:  This function actually only set RRSR, RATR and BW_OPMODE registers
+ *	     not to do all the hw config as its name says
+ *   input:  net_device dev
+ *  output:  none
+ *  return:  none
+ *  notice:  This part need to modified according to the rate set we filtered
+ * ****************************************************************************/
+void rtl8192_hwconfig(struct net_device* dev)
+{
+	u32 regRATR = 0, regRRSR = 0;
+	u8 regBwOpMode = 0, regTmp = 0;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+// Set RRSR, RATR, and BW_OPMODE registers
+	//
+	switch(priv->ieee80211->mode)
+	{
+	case WIRELESS_MODE_B:
+		regBwOpMode = BW_OPMODE_20MHZ;
+		regRATR = RATE_ALL_CCK;
+		regRRSR = RATE_ALL_CCK;
+		break;
+	case WIRELESS_MODE_A:
+		regBwOpMode = BW_OPMODE_5G |BW_OPMODE_20MHZ;
+		regRATR = RATE_ALL_OFDM_AG;
+		regRRSR = RATE_ALL_OFDM_AG;
+		break;
+	case WIRELESS_MODE_G:
+		regBwOpMode = BW_OPMODE_20MHZ;
+		regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
+		regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
+		break;
+	case WIRELESS_MODE_AUTO:
+#ifdef TO_DO_LIST
+		if (Adapter->bInHctTest)
+		{
+		    regBwOpMode = BW_OPMODE_20MHZ;
+		    regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
+		    regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
+		}
+		else
+#endif
+		{
+		    regBwOpMode = BW_OPMODE_20MHZ;
+		    regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS;
+		    regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
+		}
+		break;
+	case WIRELESS_MODE_N_24G:
+		// It support CCK rate by default.
+		// CCK rate will be filtered out only when associated AP does not support it.
+		regBwOpMode = BW_OPMODE_20MHZ;
+			regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS;
+			regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
+		break;
+	case WIRELESS_MODE_N_5G:
+		regBwOpMode = BW_OPMODE_5G;
+		regRATR = RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS;
+		regRRSR = RATE_ALL_OFDM_AG;
+		break;
+	}
+
+	write_nic_byte(dev, BW_OPMODE, regBwOpMode);
+	{
+		u32 ratr_value = 0;
+		ratr_value = regRATR;
+		if (priv->rf_type == RF_1T2R)
+		{
+			ratr_value &= ~(RATE_ALL_OFDM_2SS);
+		}
+		write_nic_dword(dev, RATR0, ratr_value);
+		write_nic_byte(dev, UFWP, 1);
+	}
+	regTmp = read_nic_byte(dev, 0x313);
+	regRRSR = ((regTmp) << 24) | (regRRSR & 0x00ffffff);
+	write_nic_dword(dev, RRSR, regRRSR);
+
+	//
+	// Set Retry Limit here
+	//
+	write_nic_word(dev, RETRY_LIMIT,
+			priv->ShortRetryLimit << RETRY_LIMIT_SHORT_SHIFT | \
+			priv->LongRetryLimit << RETRY_LIMIT_LONG_SHIFT);
+	// Set Contention Window here
+
+	// Set Tx AGC
+
+	// Set Tx Antenna including Feedback control
+
+	// Set Auto Rate fallback control
+
+
+}
+
+#ifdef RTL8192SU
+#ifdef USB_RX_AGGREGATION_SUPPORT
+u8 rtl8192SU_MapRxPageSizeToIdx(u16 RxPktSize	)
+{
+	switch(RxPktSize)
+	{
+		case 64:		return 0; break;
+		case 128	:	return 1; break;
+		case 256:		return 2; break;
+		case 512:		return 3; break;
+		case 1024:	return 4; break;
+		default:		return 0;	// We use 64bytes in defult.
+	}
+}
+#endif
+
+//
+//	Description:
+//		Initial HW relted registers.
+//
+//	Assumption:
+//		Config RTL8192S USB MAC, we should config MAC before download FW.
+//
+//	2008.09.03, Added by Roger.
+//
+static void rtl8192SU_MacConfigBeforeFwDownloadASIC(struct net_device *dev)
+{
+	u8				tmpU1b;// i;
+//	u16				tmpU2b;
+//	u32				tmpU4b;
+	u8				PollingCnt = 20;
+
+	RT_TRACE(COMP_INIT, "--->MacConfigBeforeFwDownloadASIC()\n");
+
+	//2MAC Initialization for power on sequence, Revised by Roger. 2008.09.03.
+
+	//
+	//<Roger_Notes> Set control path switch to HW control and reset Digital Core,  CPU Core and
+	// MAC I/O to solve FW download fail when system from resume sate.
+	// 2008.11.04.
+	//
+       tmpU1b = read_nic_byte(dev, SYS_CLKR+1);
+       if(tmpU1b & 0x80)
+	{
+       	tmpU1b &= 0x3f;
+              write_nic_byte(dev, SYS_CLKR+1, tmpU1b);
+       }
+	// Clear FW RPWM for FW control LPS. by tynli. 2009.02.23
+	write_nic_byte(dev, RPWM, 0x0);
+
+       tmpU1b = read_nic_byte(dev, SYS_FUNC_EN+1);
+       tmpU1b &= 0x73;
+       write_nic_byte(dev, SYS_FUNC_EN+1, tmpU1b);
+       udelay(1000);
+
+	//Revised POS, suggested by SD1 Alex, 2008.09.27.
+	write_nic_byte(dev, SPS0_CTRL+1, 0x53);
+	write_nic_byte(dev, SPS0_CTRL, 0x57);
+
+	//Enable AFE Macro Block's Bandgap adn Enable AFE Macro Block's Mbias
+	tmpU1b = read_nic_byte(dev, AFE_MISC);
+	write_nic_byte(dev, AFE_MISC, (tmpU1b|AFE_BGEN|AFE_MBEN));
+
+	//Enable PLL Power (LDOA15V)
+	tmpU1b = read_nic_byte(dev, LDOA15_CTRL);
+	write_nic_byte(dev, LDOA15_CTRL, (tmpU1b|LDA15_EN));
+
+	//Enable LDOV12D block
+	tmpU1b = read_nic_byte(dev, LDOV12D_CTRL);
+	write_nic_byte(dev, LDOV12D_CTRL, (tmpU1b|LDV12_EN));
+
+	//mpU1b = read_nic_byte(Adapter, SPS1_CTRL);
+	//write_nic_byte(dev, SPS1_CTRL, (tmpU1b|SPS1_LDEN));
+
+	//PlatformSleepUs(2000);
+
+	//Enable Switch Regulator Block
+	//tmpU1b = read_nic_byte(Adapter, SPS1_CTRL);
+	//write_nic_byte(dev, SPS1_CTRL, (tmpU1b|SPS1_SWEN));
+
+	//write_nic_dword(Adapter, SPS1_CTRL, 0x00a7b267);
+
+	tmpU1b = read_nic_byte(dev, SYS_ISO_CTRL+1);
+	write_nic_byte(dev, SYS_ISO_CTRL+1, (tmpU1b|0x08));
+
+	//Engineer Packet CP test Enable
+	tmpU1b = read_nic_byte(dev, SYS_FUNC_EN+1);
+	write_nic_byte(dev, SYS_FUNC_EN+1, (tmpU1b|0x20));
+
+	//Support 64k IMEM, suggested by SD1 Alex.
+	tmpU1b = read_nic_byte(dev, SYS_ISO_CTRL+1);
+	write_nic_byte(dev, SYS_ISO_CTRL+1, (tmpU1b& 0x68));
+
+	//Enable AFE clock
+	tmpU1b = read_nic_byte(dev, AFE_XTAL_CTRL+1);
+	write_nic_byte(dev, AFE_XTAL_CTRL+1, (tmpU1b& 0xfb));
+
+	//Enable AFE PLL Macro Block
+	tmpU1b = read_nic_byte(dev, AFE_PLL_CTRL);
+	write_nic_byte(dev, AFE_PLL_CTRL, (tmpU1b|0x11));
+
+	//Attatch AFE PLL to MACTOP/BB/PCIe Digital
+	tmpU1b = read_nic_byte(dev, SYS_ISO_CTRL);
+	write_nic_byte(dev, SYS_ISO_CTRL, (tmpU1b&0xEE));
+
+	// Switch to 40M clock
+	write_nic_byte(dev, SYS_CLKR, 0x00);
+
+	//SSC Disable
+	tmpU1b = read_nic_byte(dev, SYS_CLKR);
+	//write_nic_byte(dev, SYS_CLKR, (tmpU1b&0x5f));
+	write_nic_byte(dev, SYS_CLKR, (tmpU1b|0xa0));
+
+	//Enable MAC clock
+	tmpU1b = read_nic_byte(dev, SYS_CLKR+1);
+	write_nic_byte(dev, SYS_CLKR+1, (tmpU1b|0x18));
+
+	//Revised POS, suggested by SD1 Alex, 2008.09.27.
+	write_nic_byte(dev, PMC_FSM, 0x02);
+
+	//Enable Core digital and enable IOREG R/W
+	tmpU1b = read_nic_byte(dev, SYS_FUNC_EN+1);
+	write_nic_byte(dev, SYS_FUNC_EN+1, (tmpU1b|0x08));
+
+	//Enable REG_EN
+	tmpU1b = read_nic_byte(dev, SYS_FUNC_EN+1);
+	write_nic_byte(dev, SYS_FUNC_EN+1, (tmpU1b|0x80));
+
+	//Switch the control path to FW
+	tmpU1b = read_nic_byte(dev, SYS_CLKR+1);
+	write_nic_byte(dev, SYS_CLKR+1, (tmpU1b|0x80)& 0xBF);
+
+	write_nic_byte(dev, CMDR, 0xFC);
+	write_nic_byte(dev, CMDR+1, 0x37);
+
+	//Fix the RX FIFO issue(usb error), 970410
+	tmpU1b = read_nic_byte_E(dev, 0x5c);
+	write_nic_byte_E(dev, 0x5c, (tmpU1b|BIT7));
+
+	 //For power save, used this in the bit file after 970621
+	tmpU1b = read_nic_byte(dev, SYS_CLKR);
+	write_nic_byte(dev, SYS_CLKR, tmpU1b&(~SYS_CPU_CLKSEL));
+
+	// Revised for 8051 ROM code wrong operation. Added by Roger. 2008.10.16.
+	write_nic_byte_E(dev, 0x1c, 0x80);
+
+	//
+	// <Roger_EXP> To make sure that TxDMA can ready to download FW.
+	// We should reset TxDMA if IMEM RPT was not ready.
+	// Suggested by SD1 Alex. 2008.10.23.
+	//
+	do
+	{
+		tmpU1b = read_nic_byte(dev, TCR);
+		if((tmpU1b & TXDMA_INIT_VALUE) == TXDMA_INIT_VALUE)
+			break;
+		//PlatformStallExecution(5);
+		udelay(5);
+	}while(PollingCnt--);	// Delay 1ms
+
+	if(PollingCnt <= 0 )
+	{
+		RT_TRACE(COMP_INIT, "MacConfigBeforeFwDownloadASIC(): Polling TXDMA_INIT_VALUE timeout!! Current TCR(%#x)\n", tmpU1b);
+		tmpU1b = read_nic_byte(dev, CMDR);
+		write_nic_byte(dev, CMDR, tmpU1b&(~TXDMA_EN));
+		udelay(2);
+		write_nic_byte(dev, CMDR, tmpU1b|TXDMA_EN);// Reset TxDMA
+	}
+
+
+	RT_TRACE(COMP_INIT, "<---MacConfigBeforeFwDownloadASIC()\n");
+}
+#ifdef USB_RX_AGGREGATION_SUPPORT
+void rtl8192SU_HalUsbRxAggr8192SUsb(struct net_device *dev, bool Value)
+{
+	struct r8192_priv *priv = ieee80211_priv((struct net_device *)dev);
+	PRT_HIGH_THROUGHPUT	pHTInfo = priv->ieee80211->pHTInfo;;
+
+
+	//
+	// <Roger_Notes> We decrease Rx page aggregated threshold in B/G mode.
+	// 2008.10.29
+	//
+	if(priv->ieee80211->mode == WIRELESS_MODE_B ||  priv->ieee80211->mode == WIRELESS_MODE_G)
+	{// Overwrite current settings to disable Rx Aggregation.
+		Value = false;
+	}
+
+	// Alway set Rx Aggregation to Disable if current platform is Win2K USB 1.1, by Emily
+	//if(PLATFORM_LIMITED_RX_BUF_SIZE(Adapter))
+	//	Value = FALSE;
+
+	// Always set Rx Aggregation to Disable if connected AP is Realtek AP, by Joseph
+	//if(pHTInfo->bCurrentRT2RTAggregation)
+	//	Value = FALSE;
+
+	// The RX aggregation may be enabled/disabled dynamically according current traffic stream.
+	//Enable Rx aggregation if downlink traffic is busier than uplink traffic. by Guangan
+	if(priv->bCurrentRxAggrEnable != Value)
+	{
+		priv->bCurrentRxAggrEnable = Value;
+		//Adapter->HalFunc.SetHwRegHandler(Adapter, HW_VAR_USB_RX_AGGR, (pu1Byte)&pHalData->bCurrentRxAggrEnable);
+		{
+			//u8 	Setting = ((pu1Byte)(val))[0];
+			u8 	Setting = priv->bCurrentRxAggrEnable
+			u32 	ulValue;
+
+			if(Setting==0)
+			{
+				//
+				// <Roger_Notes> Reduce aggregated page threshold to 0x01 and set minimal threshold 0x0a.
+				// i.e., disable Rx aggregation.
+				//
+				ulValue = 0x0001000a;
+			}
+			else
+			{
+				//PRT_HIGH_THROUGHPUT	pHTInfo = priv->ieee80211->pHTInfo;
+				//HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
+
+				if (priv->bForcedUsbRxAggr)
+				{// Using forced settings.
+					ulValue = priv->ForcedUsbRxAggrInfo;
+				}
+				else
+				{// Using default settings.
+
+					ulValue = (pHTInfo->UsbRxFwAggrEn<<24) | (pHTInfo->UsbRxFwAggrPageNum<<16) |
+							(pHTInfo->UsbRxFwAggrPacketNum<<8) | (pHTInfo->UsbRxFwAggrTimeout);
+				}
+			}
+
+			write_nic_byte(dev, RXDMA_AGG_PG_TH, (u8)((ulValue&0xff0000)>>16));
+			write_nic_byte_E(dev, USB_RX_AGG_TIMEOUT, (u8)(ulValue&0xff));
+
+			priv->LastUsbRxAggrInfoSetting = ulValue;
+
+			RT_TRACE(COMP_HT|COMP_RECV, "Set HW_VAR_USB_RX_AGGR: ulValue(%#x)\n", ulValue);
+		}
+		RT_TRACE(COMP_RECV, "HalUsbRxAggr8192SUsb() :  Set RxAggregation to %s\n", Value?"ON":"OFF");
+	}
+
+}
+#endif
+
+#ifdef USB_RX_AGGREGATION_SUPPORT
+void rtl8192SU_HalUsbRxAggr8192SUsb(struct net_device *dev, bool Value)
+{
+	struct r8192_priv *priv = ieee80211_priv((struct net_device *)dev);
+	PRT_HIGH_THROUGHPUT	pHTInfo = priv->ieee80211->pHTInfo;;
+
+
+	//
+	// <Roger_Notes> We decrease Rx page aggregated threshold in B/G mode.
+	// 2008.10.29
+	//
+	if((priv->ieee80211->mode & WIRELESS_MODE_B) || (priv->ieee80211->mode & WIRELESS_MODE_G))
+	{// Overwrite current settings to disable Rx Aggregation.
+		Value = false;
+	}
+
+	// Alway set Rx Aggregation to Disable if current platform is Win2K USB 1.1, by Emily
+	//if(PLATFORM_LIMITED_RX_BUF_SIZE(Adapter))
+	//	Value = FALSE;
+
+	// Always set Rx Aggregation to Disable if connected AP is Realtek AP, by Joseph
+	//if(pHTInfo->bCurrentRT2RTAggregation)
+	//	Value = FALSE;
+
+	// The RX aggregation may be enabled/disabled dynamically according current traffic stream.
+	//Enable Rx aggregation if downlink traffic is busier than uplink traffic. by Guangan
+	if(priv->bCurrentRxAggrEnable != Value)
+	{
+		priv->bCurrentRxAggrEnable = Value;
+		//Adapter->HalFunc.SetHwRegHandler(Adapter, HW_VAR_USB_RX_AGGR, (pu1Byte)&pHalData->bCurrentRxAggrEnable);
+		{
+			//u8 	Setting = ((pu1Byte)(val))[0];
+			u8 	Setting = priv->bCurrentRxAggrEnable
+			u32 	ulValue;
+
+			if(Setting==0)
+			{
+				//
+				// <Roger_Notes> Reduce aggregated page threshold to 0x01 and set minimal threshold 0x0a.
+				// i.e., disable Rx aggregation.
+				//
+				ulValue = 0x0001000a;
+			}
+			else
+			{
+				//PRT_HIGH_THROUGHPUT	pHTInfo = priv->ieee80211->pHTInfo;
+				//HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
+
+				if (priv->bForcedUsbRxAggr)
+				{// Using forced settings.
+					ulValue = priv->ForcedUsbRxAggrInfo;
+				}
+				else
+				{// Using default settings.
+
+					ulValue = (pHTInfo->UsbRxFwAggrEn<<24) | (pHTInfo->UsbRxFwAggrPageNum<<16) |
+							(pHTInfo->UsbRxFwAggrPacketNum<<8) | (pHTInfo->UsbRxFwAggrTimeout);
+				}
+			}
+
+			write_nic_byte(dev, RXDMA_AGG_PG_TH, (u8)((ulValue&0xff0000)>>16));
+			write_nic_byte_E(dev, USB_RX_AGG_TIMEOUT, (u8)(ulValue&0xff));
+
+			priv->LastUsbRxAggrInfoSetting = ulValue;
+
+			RT_TRACE(COMP_HT|COMP_RECV, "Set HW_VAR_USB_RX_AGGR: ulValue(%#x)\n", ulValue);
+		}
+		RT_TRACE(COMP_RECV, "HalUsbRxAggr8192SUsb() :  Set RxAggregation to %s\n", Value?"ON":"OFF");
+	}
+
+}
+
+u8 rtl8192SU_MapRxPageSizeToIdx(u16 RxPktSize	)
+{
+	switch(RxPktSize)
+	{
+		case 64:		return 0; break;
+		case 128	:	return 1; break;
+		case 256:		return 2; break;
+		case 512:		return 3; break;
+		case 1024:	return 4; break;
+		default:		return 0;	// We use 64bytes in defult.
+	}
+}
+#endif
+
+#if 0
+static void rtl8192SU_SetHwRegAmpduMinSpace(struct net_device *dev, u8 MinSpaceCfg)
+{
+	struct r8192_priv *priv = ieee80211_priv((struct net_device *)dev);
+	struct ieee80211_device* ieee = priv->ieee80211;
+	u8	MinSpacingToSet;
+	u8	SecMinSpace;
+
+#ifdef RTL8192S_PREPARE_FOR_NORMAL_RELEASE
+	MinSpacingToSet = MinSpaceCfg;
+	if(MinSpacingToSet <= 7)
+	{
+		switch(ieee->pairwise_key_type)
+		{
+			case	KEY_TYPE_NA:			SecMinSpace = 0;		break;
+			case	KEY_TYPE_CCMP:
+			case	KEY_TYPE_WEP40:
+			case	KEY_TYPE_WEP104:
+			case	KEY_TYPE_TKIP:		SecMinSpace = 6;		break;
+			default:					SecMinSpace = 7;		break;
+		}
+
+		if(MinSpacingToSet < SecMinSpace)
+			MinSpacingToSet = SecMinSpace;
+		priv->MinSpaceCfg = ((priv->MinSpaceCfg&0xf8) |MinSpacingToSet);
+		RT_TRACE(COMP_SEC, "Set AMPDU_MIN_SPACE: %x\n", priv->MinSpaceCfg);
+		write_nic_byte(dev, AMPDU_MIN_SPACE, priv->MinSpaceCfg);
+	}
+
+#else
+	MinSpacingToSet = MinSpaceCfg;
+	MinSpacingToSet &= 0x07; // We only care about bit[2:0]
+	priv->MinSpaceCfg |= MinSpacingToSet;
+	RT_TRACE(COMP_SEC, "Set AMPDU_MIN_SPACE: %x\n", priv->MinSpaceCfg);
+	write_nic_byte(dev, AMPDU_MIN_SPACE, priv->MinSpaceCfg);//FIXLZM
+#endif
+}
+#endif
+
+//
+//	Description:
+//		Initial HW relted registers.
+//
+//	Assumption:
+//		1. This function is only invoked at driver intialization once.
+//		2. PASSIVE LEVEL.
+//
+//	2008.06.10, Added by Roger.
+//
+static void rtl8192SU_MacConfigAfterFwDownload(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv((struct net_device *)dev);
+	//PRT_HIGH_THROUGHPUT	pHTInfo = priv->ieee80211->pHTInfo;
+	//u8	tmpU1b, RxPageCfg, i;
+	u16	tmpU2b;
+	u8	tmpU1b;//, i;
+
+
+	RT_TRACE(COMP_INIT, "--->MacConfigAfterFwDownload()\n");
+
+	// Enable Tx/Rx
+	tmpU2b = (BBRSTn|BB_GLB_RSTn|SCHEDULE_EN|MACRXEN|MACTXEN|DDMA_EN|
+			 FW2HW_EN|RXDMA_EN|TXDMA_EN|HCI_RXDMA_EN|HCI_TXDMA_EN);		//3
+	//Adapter->HalFunc.SetHwRegHandler( Adapter, HW_VAR_COMMAND, &tmpU1b );
+	write_nic_word(dev, CMDR, tmpU2b); //LZM REGISTER COM 090305
+
+	// Loopback mode or not
+	priv->LoopbackMode = RTL8192SU_NO_LOOPBACK; // Set no loopback as default.
+	if(priv->LoopbackMode == RTL8192SU_NO_LOOPBACK)
+		tmpU1b = LBK_NORMAL;
+	else if (priv->LoopbackMode == RTL8192SU_MAC_LOOPBACK )
+		tmpU1b = LBK_MAC_DLB;
+	else
+		RT_TRACE(COMP_INIT, "Serious error: wrong loopback mode setting\n");
+
+	//Adapter->HalFunc.SetHwRegHandler( Adapter, HW_VAR_LBK_MODE, &tmpU1b);
+	write_nic_byte(dev, LBKMD_SEL, tmpU1b);
+
+	// Set RCR
+	write_nic_dword(dev, RCR, priv->ReceiveConfig);
+	RT_TRACE(COMP_INIT, "MacConfigAfterFwDownload(): Current RCR settings(%#x)\n", priv->ReceiveConfig);
+
+
+	// Set RQPN
+	//
+	// <Roger_Notes> 2008.08.18.
+	// 6 endpoints:
+	// (1) Page number on CMDQ is 0x03.
+	// (2) Page number on BCNQ, HQ and MGTQ is 0.
+	// (3) Page number on BKQ, BEQ, VIQ and VOQ are 0x07.
+	// (4) Page number on PUBQ is 0xdd
+	//
+	// 11 endpoints:
+	// (1) Page number on CMDQ is 0x00.
+	// (2) Page number on BCNQ is 0x02, HQ and MGTQ are 0x03.
+	// (3) Page number on BKQ, BEQ, VIQ and VOQ are 0x07.
+	// (4) Page number on PUBQ is 0xd8
+	//
+	//write_nic_dword(Adapter, 0xa0, 0x07070707); //BKQ, BEQ, VIQ and VOQ
+	//write_nic_byte(dev, 0xa4, 0x00); // HCCAQ
+#if 0	 //LZM 090219
+#ifdef USE_SIX_USB_ENDPOINT
+	//write_nic_dword(Adapter, 0xa5, 0x00000003); //CMDQ, MGTQ, HQ and BCNQ
+	//write_nic_byte(dev, 0xa9, 0xdd); // PUBQ
+	tmpU1b = read_nic_byte(dev, 0xab); // RQPN
+	write_nic_byte(dev, 0xab, tmpU1b|BIT7|BIT6);// reduce to 6 endpoints.
+#else
+	write_nic_dword(dev, 0xa5, 0x02030300); //CMDQ, MGTQ, HQ and BCNQ
+	write_nic_byte(dev, 0xa9, 0xd8); // PUBQ
+	tmpU1b = read_nic_byte(dev, 0xab); // RQPN
+	write_nic_byte(dev, 0xab, (tmpU1b&(~BIT6))|BIT7); // Disable reduced endpoint.
+#endif
+#endif
+
+#ifdef USB_RX_AGGREGATION_SUPPORT
+	// Size of Tx/Rx packet buffer.
+	tmpU1b = read_nic_byte(dev, PBP);
+	RxPageCfg = rtl8192SU_MapRxPageSizeToIdx(priv->ieee80211->pHTInfo.UsbRxPageSize);
+	write_nic_byte(dev, PBP, tmpU1b|RxPageCfg); // Set page size of Rx packet buffer to 128 bytes.
+	tmpU1b = read_nic_byte(dev, RXDMA);
+
+	write_nic_byte(dev, RXDMA, tmpU1b|RXDMA_AGG_EN); // Rx aggregation enable.
+	//PlatformIOWrite1Byte(Adapter, RXDMA_AGG_PG_TH, 0x14);	// Set page size of RxDMA aggregation threshold, default: 20.
+	//write_nic_byte(dev, RXDMA_AGG_PG_TH, 0x40); // By Scott's suggestion, 2008.09.30.//92su del
+	//write_nic_byte(dev, USB_RX_AGG_TIMEOUT, RXDMA_AGG_TIMEOUT_17_4_MS); // Set aggregation time-out to 17ms/4.
+	rtl8192SU_HalUsbRxAggr8192SUsb(dev, true);
+#endif
+
+	// Fix the RX FIFO issue(USB error), Rivesed by Roger, 2008-06-14
+	tmpU1b = read_nic_byte_E(dev, 0x5C);
+	write_nic_byte_E(dev, 0x5C, tmpU1b|BIT7);
+
+	//
+	// Revise USB PHY to solve the issue of Rx payload error, Rivesed by Roger,  2008-04-10
+	// Suggest by SD1 Alex.
+	//
+	// <Roger_Notes> The following operation are ONLY for USB PHY test chip.
+	// 2008.10.07.
+	//
+#if RTL8192SU_USB_PHY_TEST
+	write_nic_byte(dev, 0x41,0xf4);
+	write_nic_byte(dev, 0x40,0x00);
+	write_nic_byte(dev, 0x42,0x00);
+	write_nic_byte(dev, 0x42,0x01);
+	write_nic_byte(dev, 0x40,0x0f);
+	write_nic_byte(dev, 0x42,0x00);
+	write_nic_byte(dev, 0x42,0x01);
+#endif
+
+#if 0 //LZM 090219
+	//
+	// Suggested by SD1 Alex, 2008-06-14.
+	//
+	write_nic_byte(dev, TXOP_STALL_CTRL, 0x80);//NAV
+
+
+	//
+	// Set Data Auto Rate Fallback Retry Count register.
+	//
+	write_nic_dword(dev, DARFRC, 0x04010000);
+	write_nic_dword(dev, DARFRC+4, 0x09070605);
+	write_nic_dword(dev, RARFRC, 0x04010000);
+	write_nic_dword(dev, RARFRC+4, 0x09070605);
+
+	// Set Data Auto Rate Fallback Reg. Added by Roger, 2008.09.22.
+	for (i = 0; i < 8; i++)
+#ifdef RTL8192SU_DISABLE_CCK_RATE
+		write_nic_dword(dev, ARFR0+i*4, 0x1f0ff0f0);
+#else
+		write_nic_dword(dev, ARFR0+i*4, 0x1f0ffff0);
+#endif
+
+	//
+	// Set driver info, we only accept PHY status now.
+	//
+	//write_nic_byte(dev, RXDRVINFO_SZ, 4);
+
+	//
+	// Aggregation length limit. Revised by Roger. 2008.09.22.
+	//
+	write_nic_dword(dev, AGGLEN_LMT_L, 0x66666666); // Long GI
+	write_nic_byte(dev, AGGLEN_LMT_H, 0x06);	// Set AMPDU length to 12Kbytes for ShortGI case.
+
+	//
+	// For Min Spacing configuration.
+	//
+	//Adapter->HalFunc.SetHwRegHandler(Adapter, HW_VAR_AMPDU_MIN_SPACE, (u8*)(&Adapter->MgntInfo.MinSpaceCfg));
+	rtl8192SU_SetHwRegAmpduMinSpace(dev,priv->MinSpaceCfg);
+#endif
+
+	// For EFUSE init configuration.
+	//if (IS_BOOT_FROM_EFUSE(Adapter))	// We may R/W EFUSE in EFUSE mode
+	if (priv->bBootFromEfuse)
+	{
+		u8	tempval;
+
+		tempval = read_nic_byte(dev, SYS_ISO_CTRL+1);
+		tempval &= 0xFE;
+		write_nic_byte(dev, SYS_ISO_CTRL+1, tempval);
+
+		// Enable LDO 2.5V for write action
+		//tempval = read_nic_byte(Adapter, EFUSE_TEST+3);
+		//write_nic_byte(Adapter, EFUSE_TEST+3, (tempval | 0x80));
+
+		// Change Efuse Clock for write action
+		//write_nic_byte(Adapter, EFUSE_CLK, 0x03);
+
+		// Change Program timing
+		write_nic_byte(dev, EFUSE_CTRL+3, 0x72);
+		//printk("!!!!!!!!!!!!!!!!!!!!!%s: write 0x33 with 0x72\n",__FUNCTION__);
+		RT_TRACE(COMP_INIT, "EFUSE CONFIG OK\n");
+	}
+
+
+	RT_TRACE(COMP_INIT, "<---MacConfigAfterFwDownload()\n");
+}
+
+void rtl8192SU_HwConfigureRTL8192SUsb(struct net_device *dev)
+{
+
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u8			regBwOpMode = 0;
+	u32			regRATR = 0, regRRSR = 0;
+	u8			regTmp = 0;
+	u32 			i = 0;
+
+	//1 This part need to modified according to the rate set we filtered!!
+	//
+	// Set RRSR, RATR, and BW_OPMODE registers
+	//
+	switch(priv->ieee80211->mode)
+	{
+	case WIRELESS_MODE_B:
+		regBwOpMode = BW_OPMODE_20MHZ;
+		regRATR = RATE_ALL_CCK;
+		regRRSR = RATE_ALL_CCK;
+		break;
+	case WIRELESS_MODE_A:
+		regBwOpMode = BW_OPMODE_5G |BW_OPMODE_20MHZ;
+		regRATR = RATE_ALL_OFDM_AG;
+		regRRSR = RATE_ALL_OFDM_AG;
+		break;
+	case WIRELESS_MODE_G:
+		regBwOpMode = BW_OPMODE_20MHZ;
+		regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
+		regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
+		break;
+	case WIRELESS_MODE_AUTO:
+		if (priv->bInHctTest)
+		{
+		    regBwOpMode = BW_OPMODE_20MHZ;
+		    regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
+		    regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
+		}
+		else
+		{
+		    regBwOpMode = BW_OPMODE_20MHZ;
+		    regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS;
+		    regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
+		}
+		break;
+	case WIRELESS_MODE_N_24G:
+		// It support CCK rate by default.
+		// CCK rate will be filtered out only when associated AP does not support it.
+		regBwOpMode = BW_OPMODE_20MHZ;
+			regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS;
+			regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
+		break;
+	case WIRELESS_MODE_N_5G:
+		regBwOpMode = BW_OPMODE_5G;
+		regRATR = RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS;
+		regRRSR = RATE_ALL_OFDM_AG;
+		break;
+	}
+
+	//
+	// <Roger_Notes> We disable CCK response rate until FIB CCK rate IC's back.
+	// 2008.09.23.
+	//
+	regTmp = read_nic_byte(dev, INIRTSMCS_SEL);
+#ifdef RTL8192SU_DISABLE_CCK_RATE
+	regRRSR = ((regRRSR & 0x000ffff0)<<8) | regTmp;
+#else
+	regRRSR = ((regRRSR & 0x000fffff)<<8) | regTmp;
+#endif
+
+	//
+	// Update SIFS timing.
+	//
+	//priv->SifsTime = 0x0e0e0a0a;
+	//Adapter->HalFunc.SetHwRegHandler( Adapter, HW_VAR_SIFS,  (pu1Byte)&pHalData->SifsTime);
+	{	u8 val[4] = {0x0e, 0x0e, 0x0a, 0x0a};
+		// SIFS for CCK Data ACK
+		write_nic_byte(dev, SIFS_CCK, val[0]);
+		// SIFS for CCK consecutive tx like CTS data!
+		write_nic_byte(dev, SIFS_CCK+1, val[1]);
+
+		// SIFS for OFDM Data ACK
+		write_nic_byte(dev, SIFS_OFDM, val[2]);
+		// SIFS for OFDM consecutive tx like CTS data!
+		write_nic_byte(dev, SIFS_OFDM+1, val[3]);
+	}
+
+	write_nic_dword(dev, INIRTSMCS_SEL, regRRSR);
+	write_nic_byte(dev, BW_OPMODE, regBwOpMode);
+
+	//
+	// Suggested by SD1 Alex, 2008-06-14.
+	//
+	//PlatformEFIOWrite1Byte(Adapter, TXOP_STALL_CTRL, 0x80);//NAV to protect all TXOP.
+
+	//
+	// Set Data Auto Rate Fallback Retry Count register.
+	//
+	write_nic_dword(dev, DARFRC, 0x02010000);
+	write_nic_dword(dev, DARFRC+4, 0x06050403);
+	write_nic_dword(dev, RARFRC, 0x02010000);
+	write_nic_dword(dev, RARFRC+4, 0x06050403);
+
+	// Set Data Auto Rate Fallback Reg. Added by Roger, 2008.09.22.
+	for (i = 0; i < 8; i++)
+#ifdef RTL8192SU_DISABLE_CCK_RATE
+		write_nic_dword(dev, ARFR0+i*4, 0x1f0ff0f0);
+#else
+		write_nic_dword(dev, ARFR0+i*4, 0x1f0ffff0);
+#endif
+
+	//
+	// Aggregation length limit. Revised by Roger. 2008.09.22.
+	//
+	write_nic_byte(dev, AGGLEN_LMT_H, 0x0f);	// Set AMPDU length to 12Kbytes for ShortGI case.
+	write_nic_dword(dev, AGGLEN_LMT_L, 0xddd77442); // Long GI
+	write_nic_dword(dev, AGGLEN_LMT_L+4, 0xfffdd772);
+
+	// Set NAV protection length
+	write_nic_word(dev, NAV_PROT_LEN, 0x0080);
+
+	// Set TXOP stall control for several queue/HI/BCN/MGT/
+	write_nic_byte(dev, TXOP_STALL_CTRL, 0x00); // NAV Protect next packet.
+
+	// Set MSDU lifetime.
+	write_nic_byte(dev, MLT, 0x8f);
+
+	// Set CCK/OFDM SIFS
+	write_nic_word(dev, SIFS_CCK, 0x0a0a); // CCK SIFS shall always be 10us.
+	write_nic_word(dev, SIFS_OFDM, 0x0e0e);
+
+	write_nic_byte(dev, ACK_TIMEOUT, 0x40);
+
+	// CF-END Threshold
+	write_nic_byte(dev, CFEND_TH, 0xFF);
+
+	//
+	// For Min Spacing configuration.
+	//
+	switch(priv->rf_type)
+	{
+		case RF_1T2R:
+		case RF_1T1R:
+			RT_TRACE(COMP_INIT, "Initializeadapter: RF_Type%s\n", (priv->rf_type==RF_1T1R? "(1T1R)":"(1T2R)"));
+			priv->MinSpaceCfg = (MAX_MSS_DENSITY_1T<<3);
+			break;
+		case RF_2T2R:
+		case RF_2T2R_GREEN:
+			RT_TRACE(COMP_INIT, "Initializeadapter:RF_Type(2T2R)\n");
+			priv->MinSpaceCfg = (MAX_MSS_DENSITY_2T<<3);
+			break;
+	}
+	write_nic_byte(dev, AMPDU_MIN_SPACE, priv->MinSpaceCfg);
+
+	//LZM 090219
+	//
+	// For Min Spacing configuration.
+	//
+	//priv->MinSpaceCfg = 0x00;
+	//rtl8192SU_SetHwRegAmpduMinSpace(dev, priv->MinSpaceCfg);
+}
+
+#endif
+
+#ifdef RTL8192SU
+//	Description:	Initial HW relted registers.
+//
+//	Assumption:	This function is only invoked at driver intialization once.
+//
+//	2008.06.10, Added by Roger.
+bool rtl8192SU_adapter_start(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	//u32 					dwRegRead = 0;
+	//bool 					init_status = true;
+	//u32					ulRegRead;
+	bool             				rtStatus = true;
+	//u8					PipeIndex;
+	//u8					eRFPath, tmpU1b;
+	u8 fw_download_times = 1;
+
+
+	RT_TRACE(COMP_INIT, "--->InitializeAdapter8192SUsb()\n");
+
+	//pHalData->bGPIOChangeRF = FALSE;
+
+
+	//
+	// <Roger_Notes> 2008.06.15.
+	//
+	// Initialization Steps on RTL8192SU:
+	// a. MAC initialization prior to sending down firmware code.
+	// b. Download firmware code step by step(i.e., IMEM, EMEM, DMEM).
+	// c. MAC configuration after firmware has been download successfully.
+	// d. Initialize BB related configurations.
+	// e. Initialize RF related configurations.
+	// f.  Start to BulkIn transfer.
+	//
+
+	//
+	//a. MAC initialization prior to send down firmware code.
+	//
+start:
+	rtl8192SU_MacConfigBeforeFwDownloadASIC(dev);
+
+	//
+	//b. Download firmware code step by step(i.e., IMEM, EMEM, DMEM).
+	//
+	rtStatus = FirmwareDownload92S(dev);
+	if(rtStatus != true)
+	{
+		if(fw_download_times == 1){
+			RT_TRACE(COMP_INIT, "InitializeAdapter8192SUsb(): Download Firmware failed once, Download again!!\n");
+			fw_download_times = fw_download_times + 1;
+			goto start;
+		}else{
+			RT_TRACE(COMP_INIT, "InitializeAdapter8192SUsb(): Download Firmware failed twice, end!!\n");
+		goto end;
+	}
+	}
+	//
+	//c. MAC configuration after firmware has been download successfully.
+	//
+	rtl8192SU_MacConfigAfterFwDownload(dev);
+
+#if (RTL8192S_DISABLE_FW_DM == 1)
+	write_nic_dword(dev, WFM5, FW_DM_DISABLE);
+#endif
+	//priv->bLbusEnable = TRUE;
+	//if(priv->RegRfOff == TRUE)
+	//	priv->eRFPowerState = eRfOff;
+
+	// Save target channel
+	// <Roger_Notes> Current Channel will be updated again later.
+	//priv->CurrentChannel = Channel;
+	rtStatus = PHY_MACConfig8192S(dev);//===>ok
+	if(rtStatus != true)
+	{
+		RT_TRACE(COMP_INIT, "InitializeAdapter8192SUsb(): Fail to configure MAC!!\n");
+		goto end;
+	}
+	if (1){
+		int i;
+		for (i=0; i<4; i++)
+			write_nic_dword(dev,WDCAPARA_ADD[i], 0x5e4322);
+		write_nic_byte(dev,AcmHwCtrl, 0x01);
+	}
+
+
+	//
+	//d. Initialize BB related configurations.
+	//
+
+	rtStatus = PHY_BBConfig8192S(dev);//===>ok
+	if(rtStatus != true)
+	{
+		RT_TRACE(COMP_INIT, "InitializeAdapter8192SUsb(): Fail to configure BB!!\n");
+		goto end;
+	}
+
+	rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0xff, 0x58);//===>ok
+
+	//
+	// e. Initialize RF related configurations.
+	//
+	// 2007/11/02 MH Before initalizing RF. We can not use FW to do RF-R/W.
+	priv->Rf_Mode = RF_OP_By_SW_3wire;
+
+	// For RF test only from Scott's suggestion
+	//write_nic_byte(dev, 0x27, 0xDB);
+	//write_nic_byte(dev, 0x1B, 0x07);
+
+
+	write_nic_byte(dev, AFE_XTAL_CTRL+1, 0xDB);
+
+	// <Roger_Notes> The following IOs are configured for each RF modules.
+	// Enable RF module and reset RF and SDM module. 2008.11.17.
+	if(priv->card_8192_version == VERSION_8192S_ACUT)
+		write_nic_byte(dev, SPS1_CTRL+3, (u8)(RF_EN|RF_RSTB|RF_SDMRSTB)); // Fix A-Cut bug.
+	else
+		write_nic_byte(dev, RF_CTRL, (u8)(RF_EN|RF_RSTB|RF_SDMRSTB));
+
+	rtStatus = PHY_RFConfig8192S(dev);//===>ok
+	if(rtStatus != true)
+	{
+		RT_TRACE(COMP_INIT, "InitializeAdapter8192SUsb(): Fail to configure RF!!\n");
+		goto end;
+	}
+
+
+	// Set CCK and OFDM Block "ON"
+	rtl8192_setBBreg(dev, rFPGA0_RFMOD, bCCKEn, 0x1);
+	rtl8192_setBBreg(dev, rFPGA0_RFMOD, bOFDMEn, 0x1);
+
+	//
+	// Turn off Radio B while RF type is 1T1R by SD3 Wilsion's request.
+	// Revised by Roger, 2008.12.18.
+	//
+	if(priv->rf_type == RF_1T1R)
+	{
+		// This is needed for PHY_REG after 20081219
+		rtl8192_setBBreg(dev, rFPGA0_RFMOD, 0xff000000, 0x03);
+		// This is needed for PHY_REG before 20081219
+		//PHY_SetBBReg(Adapter, rOFDM0_TRxPathEnable, bMaskByte0, 0x11);
+	}
+
+#if (RTL8192SU_DISABLE_IQK==0)
+		// For 1T2R IQK only currently.
+		if (priv->card_8192_version == VERSION_8192S_BCUT)
+		{
+			PHY_IQCalibrateBcut(dev);
+		}
+		else if (priv->card_8192_version == VERSION_8192S_ACUT)
+		{
+			PHY_IQCalibrate(dev);
+		}
+#endif
+
+	//LZM 090219
+	// Set CCK and OFDM Block "ON"
+	//rtl8192_setBBreg(dev, rFPGA0_RFMOD, bCCKEn, 0x1);
+	//rtl8192_setBBreg(dev, rFPGA0_RFMOD, bOFDMEn, 0x1);
+
+
+	//3//Get hardware version, do it in read eeprom?
+	//GetHardwareVersion819xUsb(Adapter);
+
+	//3//
+	//3 //Set Hardware
+	//3//
+	rtl8192SU_HwConfigureRTL8192SUsb(dev);//==>ok
+
+	//
+	// <Roger_Notes> We set MAC address here if autoload was failed before,
+	// otherwise IDR0 will NOT contain any value.
+	//
+	write_nic_dword(dev, IDR0, ((u32*)dev->dev_addr)[0]);
+	write_nic_word(dev, IDR4, ((u16*)(dev->dev_addr + 4))[0]);
+	if(!priv->bInHctTest)
+	{
+		if(priv->ResetProgress == RESET_TYPE_NORESET)
+		{
+			//RT_TRACE(COMP_MLME, DBG_LOUD, ("Initializeadapter8192SUsb():RegWirelessMode(%#x) \n", Adapter->RegWirelessMode));
+			//Adapter->HalFunc.SetWirelessModeHandler(Adapter, Adapter->RegWirelessMode);
+			rtl8192_SetWirelessMode(dev, priv->ieee80211->mode);//===>ok
+	        }
+	}
+	else
+	{
+		priv->ieee80211->mode = WIRELESS_MODE_G;
+	 	rtl8192_SetWirelessMode(dev, WIRELESS_MODE_G);
+	}
+
+	//Security related.
+	//-----------------------------------------------------------------------------
+	// Set up security related. 070106, by rcnjko:
+	// 1. Clear all H/W keys.
+	// 2. Enable H/W encryption/decryption.
+	//-----------------------------------------------------------------------------
+	//CamResetAllEntry(Adapter);
+	//Adapter->HalFunc.EnableHWSecCfgHandler(Adapter);
+
+	//SecClearAllKeys(Adapter);
+	CamResetAllEntry(dev);
+	//SecInit(Adapter);
+	{
+		u8 SECR_value = 0x0;
+		SECR_value |= SCR_TxEncEnable;
+		SECR_value |= SCR_RxDecEnable;
+		SECR_value |= SCR_NoSKMC;
+		write_nic_byte(dev, SECR, SECR_value);
+	}
+
+#if 0
+
+	if(pHalData->VersionID == VERSION_8192SU_A)
+	{
+		// cosa add for tx power level initialization.
+		GetTxPowerOriginalOffset(Adapter);
+		SetTxPowerLevel819xUsb(Adapter, Channel);
+	}
+#endif
+
+
+#ifdef TO_DO_LIST
+
+	//PHY_UpdateInitialGain(dev);
+
+	if(priv->RegRfOff == true)
+	{ // User disable RF via registry.
+		u8 eRFPath = 0;
+
+		RT_TRACE((COMP_INIT|COMP_RF), "InitializeAdapter8192SUsb(): Turn off RF for RegRfOff ----------\n");
+		MgntActSet_RF_State(dev, eRfOff, RF_CHANGE_BY_SW);
+		// Those action will be discard in MgntActSet_RF_State because off the same state
+		for(eRFPath = 0; eRFPath <priv->NumTotalRFPath; eRFPath++)
+			rtl8192_setBBreg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
+	}
+	else if(priv->RfOffReason > RF_CHANGE_BY_PS)
+	{ // H/W or S/W RF OFF before sleep.
+		RT_TRACE((COMP_INIT|COMP_RF), "InitializeAdapter8192SUsb(): Turn off RF for RfOffReason(%d) ----------\n", priv->RfOffReason);
+		MgntActSet_RF_State(dev, eRfOff, priv->RfOffReason);
+	}
+	else
+	{
+		priv->eRFPowerState = eRfOn;
+		priv->RfOffReason = 0;
+		RT_TRACE((COMP_INIT|COMP_RF), "InitializeAdapter8192SUsb(): RF is on ----------\n");
+	}
+
+#endif
+
+
+//
+// f. Start to BulkIn transfer.
+//
+#ifdef TO_DO_LIST
+
+#ifndef UNDER_VISTA
+	{
+		u8	i;
+		PlatformAcquireSpinLock(Adapter, RT_RX_SPINLOCK);
+
+		for(PipeIndex=0; PipeIndex < MAX_RX_QUEUE; PipeIndex++)
+		{
+			if (PipeIndex == 0)
+			{
+				for(i=0; i<32; i++)
+				HalUsbInMpdu(Adapter, PipeIndex);
+			}
+			else
+			{
+				//HalUsbInMpdu(Adapter, PipeIndex);
+				//HalUsbInMpdu(Adapter, PipeIndex);
+				//HalUsbInMpdu(Adapter, PipeIndex);
+			}
+		}
+		PlatformReleaseSpinLock(Adapter, RT_RX_SPINLOCK);
+	}
+#else
+		// Joseph add to 819X code base for Vista USB platform.
+		// This part may need to be add to Hal819xU code base. too.
+	        PlatformUsbEnableInPipes(Adapter);
+#endif
+
+	RT_TRACE(COMP_INIT, "HighestOperaRate = %x\n", Adapter->MgntInfo.HighestOperaRate);
+
+	PlatformStartWorkItem( &(pHalData->RtUsbCheckForHangWorkItem) );
+
+	//
+	// <Roger_EXP> The following  configurations are for ASIC verification temporally.
+	// 2008.07.10.
+	//
+
+#endif
+
+	//
+	// Read EEPROM TX power index and PHY_REG_PG.txt to capture correct
+	// TX power index for different rate set.
+	//
+	//if(priv->card_8192_version >= VERSION_8192S_ACUT)
+	{
+		// Get original hw reg values
+		PHY_GetHWRegOriginalValue(dev);
+
+		// Write correct tx power index//FIXLZM
+		PHY_SetTxPowerLevel8192S(dev, priv->chan);
+	}
+
+	{
+	u8  tmpU1b = 0;
+	// EEPROM R/W workaround
+	tmpU1b = read_nic_byte(dev, MAC_PINMUX_CFG);
+	write_nic_byte(dev, MAC_PINMUX_CFG, tmpU1b&(~GPIOMUX_EN));
+	}
+
+//
+//<Roger_Notes> 2008.08.19.
+// We return status here for temporal FPGA verification, 2008.08.19.
+
+#ifdef RTL8192SU_FW_IQK
+	write_nic_dword(dev, WFM5, FW_IQK_ENABLE);
+	ChkFwCmdIoDone(dev);
+#endif
+
+	//
+	// <Roger_Notes> We enable high power mechanism after NIC initialized.
+	// 2008.11.27.
+	//
+	write_nic_dword(dev, WFM5, FW_RA_RESET);
+	ChkFwCmdIoDone(dev);
+	write_nic_dword(dev, WFM5, FW_RA_ACTIVE);
+	ChkFwCmdIoDone(dev);
+	write_nic_dword(dev, WFM5, FW_RA_REFRESH);
+	ChkFwCmdIoDone(dev);
+	write_nic_dword(dev, WFM5, FW_BB_RESET_ENABLE);
+
+// <Roger_Notes> We return status here for temporal FPGA verification. 2008.05.12.
+//
+#if RTL8192SU_FPGA_UNSPECIFIED_NETWORK
+	//
+	// To send specific number of packets to verify MAC Lookback mode.
+	//
+	//SendRandomTxPkt(Adapter, 0); // Burst mode for verification.
+	//rtStatus = RT_STATUS_FAILURE;
+	rtStatus = true;
+        goto end;
+#endif
+
+// The following IO was for FPGA verification purpose. Added by Roger, 2008.09.11.
+#if 0
+	// 2008/08/19 MH From SD1 Jong, we must write some register for true PHY/MAC FPGA.
+	write_nic_byte(dev, rOFDM0_XAAGCCore1, 0x30);
+	write_nic_byte(dev, rOFDM0_XBAGCCore1, 0x30);
+
+	write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
+
+	//write_nic_dword(Adapter, RCR, 0x817FF02F);
+
+	write_nic_dword(Adapter, rTxAGC_Mcs15_Mcs12, 0x06060606);
+#endif
+end:
+return rtStatus;
+}
+
+#else
+
+//InitializeAdapter and PhyCfg
+bool rtl8192_adapter_start(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u32 dwRegRead = 0;
+	bool init_status = true;
+	RT_TRACE(COMP_INIT, "====>%s()\n", __FUNCTION__);
+	priv->Rf_Mode = RF_OP_By_SW_3wire;
+	//for ASIC power on sequence
+	write_nic_byte_E(dev, 0x5f, 0x80);
+	mdelay(50);
+	write_nic_byte_E(dev, 0x5f, 0xf0);
+	write_nic_byte_E(dev, 0x5d, 0x00);
+	write_nic_byte_E(dev, 0x5e, 0x80);
+	write_nic_byte(dev, 0x17, 0x37);
+	mdelay(10);
+//#ifdef TO_DO_LIST
+	priv->pFirmware->firmware_status = FW_STATUS_0_INIT;
+	//config CPUReset Register
+	//Firmware Reset or not?
+	dwRegRead = read_nic_dword(dev, CPU_GEN);
+	if (priv->pFirmware->firmware_status == FW_STATUS_0_INIT)
+		dwRegRead |= CPU_GEN_SYSTEM_RESET; //do nothing here?
+	else if (priv->pFirmware->firmware_status == FW_STATUS_5_READY)
+		dwRegRead |= CPU_GEN_FIRMWARE_RESET;
+	else
+		RT_TRACE(COMP_ERR, "ERROR in %s(): undefined firmware state(%d)\n", __FUNCTION__,   priv->pFirmware->firmware_status);
+
+	write_nic_dword(dev, CPU_GEN, dwRegRead);
+	//mdelay(30);
+	//config BB.
+	rtl8192_BBConfig(dev);
+
+#if 1
+	//Loopback mode or not
+	priv->LoopbackMode = RTL819xU_NO_LOOPBACK;
+//	priv->LoopbackMode = RTL819xU_MAC_LOOPBACK;
+
+	dwRegRead = read_nic_dword(dev, CPU_GEN);
+	if (priv->LoopbackMode == RTL819xU_NO_LOOPBACK)
+		dwRegRead = ((dwRegRead & CPU_GEN_NO_LOOPBACK_MSK) | CPU_GEN_NO_LOOPBACK_SET);
+	else if (priv->LoopbackMode == RTL819xU_MAC_LOOPBACK)
+		dwRegRead |= CPU_CCK_LOOPBACK;
+	else
+		RT_TRACE(COMP_ERR, "Serious error in %s(): wrong loopback mode setting(%d)\n", __FUNCTION__,  priv->LoopbackMode);
+
+	write_nic_dword(dev, CPU_GEN, dwRegRead);
+
+	//after reset cpu, we need wait for a seconds to write in register.
+	udelay(500);
+
+	//xiong add for new bitfile:usb suspend reset pin set to 1. //do we need?
+	write_nic_byte_E(dev, 0x5f, (read_nic_byte_E(dev, 0x5f)|0x20));
+
+	//Set Hardware
+	rtl8192_hwconfig(dev);
+
+	//turn on Tx/Rx
+	write_nic_byte(dev, CMDR, CR_RE|CR_TE);
+
+	//set IDR0 here
+	write_nic_dword(dev, MAC0, ((u32*)dev->dev_addr)[0]);
+	write_nic_word(dev, MAC4, ((u16*)(dev->dev_addr + 4))[0]);
+
+	//set RCR
+	write_nic_dword(dev, RCR, priv->ReceiveConfig);
+
+	//Initialize Number of Reserved Pages in Firmware Queue
+	write_nic_dword(dev, RQPN1,  NUM_OF_PAGE_IN_FW_QUEUE_BK << RSVD_FW_QUEUE_PAGE_BK_SHIFT |\
+						NUM_OF_PAGE_IN_FW_QUEUE_BE << RSVD_FW_QUEUE_PAGE_BE_SHIFT | \
+						NUM_OF_PAGE_IN_FW_QUEUE_VI << RSVD_FW_QUEUE_PAGE_VI_SHIFT | \
+						NUM_OF_PAGE_IN_FW_QUEUE_VO <<RSVD_FW_QUEUE_PAGE_VO_SHIFT);
+	write_nic_dword(dev, RQPN2, NUM_OF_PAGE_IN_FW_QUEUE_MGNT << RSVD_FW_QUEUE_PAGE_MGNT_SHIFT |\
+						NUM_OF_PAGE_IN_FW_QUEUE_CMD << RSVD_FW_QUEUE_PAGE_CMD_SHIFT);
+	write_nic_dword(dev, RQPN3, APPLIED_RESERVED_QUEUE_IN_FW| \
+						NUM_OF_PAGE_IN_FW_QUEUE_BCN<<RSVD_FW_QUEUE_PAGE_BCN_SHIFT
+//						| NUM_OF_PAGE_IN_FW_QUEUE_PUB<<RSVD_FW_QUEUE_PAGE_PUB_SHIFT
+						);
+	write_nic_dword(dev, RATR0+4*7, (RATE_ALL_OFDM_AG | RATE_ALL_CCK));
+
+	//Set AckTimeout
+	// TODO: (it value is only for FPGA version). need to be changed!!2006.12.18, by Emily
+	write_nic_byte(dev, ACK_TIMEOUT, 0x30);
+
+//	RT_TRACE(COMP_INIT, "%s():priv->ResetProgress is %d\n", __FUNCTION__,priv->ResetProgress);
+	if(priv->ResetProgress == RESET_TYPE_NORESET)
+	rtl8192_SetWirelessMode(dev, priv->ieee80211->mode);
+	if(priv->ResetProgress == RESET_TYPE_NORESET){
+	CamResetAllEntry(dev);
+	{
+		u8 SECR_value = 0x0;
+		SECR_value |= SCR_TxEncEnable;
+		SECR_value |= SCR_RxDecEnable;
+		SECR_value |= SCR_NoSKMC;
+		write_nic_byte(dev, SECR, SECR_value);
+	}
+	}
+
+	//Beacon related
+	write_nic_word(dev, ATIMWND, 2);
+	write_nic_word(dev, BCN_INTERVAL, 100);
+
+	{
+#define DEFAULT_EDCA 0x005e4332
+		int i;
+		for (i=0; i<QOS_QUEUE_NUM; i++)
+		write_nic_dword(dev, WDCAPARA_ADD[i], DEFAULT_EDCA);
+	}
+#ifdef USB_RX_AGGREGATION_SUPPORT
+	//3 For usb rx firmware aggregation control
+	if(priv->ResetProgress == RESET_TYPE_NORESET)
+	{
+		u32 ulValue;
+		PRT_HIGH_THROUGHPUT	pHTInfo = priv->ieee80211->pHTInfo;
+		ulValue = (pHTInfo->UsbRxFwAggrEn<<24) | (pHTInfo->UsbRxFwAggrPageNum<<16) |
+					(pHTInfo->UsbRxFwAggrPacketNum<<8) | (pHTInfo->UsbRxFwAggrTimeout);
+		/*
+		 * If usb rx firmware aggregation is enabled,
+		 * when anyone of three threshold conditions above is reached,
+		 * firmware will send aggregated packet to driver.
+		 */
+		write_nic_dword(dev, 0x1a8, ulValue);
+		priv->bCurrentRxAggrEnable = true;
+	}
+#endif
+
+	rtl8192_phy_configmac(dev);
+
+	if (priv->card_8192_version == (u8) VERSION_819xU_A)
+	{
+		rtl8192_phy_getTxPower(dev);
+		rtl8192_phy_setTxPower(dev, priv->chan);
+	}
+
+
+	priv->usb_error = false;
+	//Firmware download
+	init_status = init_firmware(dev);
+	if(!init_status)
+	{
+		RT_TRACE(COMP_ERR,"ERR!!! %s(): Firmware download is failed\n", __FUNCTION__);
+		return init_status;
+	}
+	RT_TRACE(COMP_INIT, "%s():after firmware download\n", __FUNCTION__);
+	//
+#ifdef TO_DO_LIST
+if(Adapter->ResetProgress == RESET_TYPE_NORESET)
+	{
+		if(pMgntInfo->RegRfOff == TRUE)
+		{ // User disable RF via registry.
+			RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RegRfOff ----------\n"));
+			MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW);
+			// Those action will be discard in MgntActSet_RF_State because off the same state
+			for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
+				PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
+		}
+		else if(pMgntInfo->RfOffReason > RF_CHANGE_BY_PS)
+		{ // H/W or S/W RF OFF before sleep.
+			RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RfOffReason(%d) ----------\n", pMgntInfo->RfOffReason));
+			MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason);
+		}
+		else
+		{
+			pHalData->eRFPowerState = eRfOn;
+			pMgntInfo->RfOffReason = 0;
+			RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): RF is on ----------\n"));
+		}
+	}
+	else
+	{
+		if(pHalData->eRFPowerState == eRfOff)
+		{
+			MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason);
+			// Those action will be discard in MgntActSet_RF_State because off the same state
+			for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
+				PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
+		}
+	}
+#endif
+	//config RF.
+	if(priv->ResetProgress == RESET_TYPE_NORESET){
+	rtl8192_phy_RFConfig(dev);
+	RT_TRACE(COMP_INIT, "%s():after phy RF config\n", __FUNCTION__);
+	}
+
+
+	if(priv->ieee80211->FwRWRF)
+		// We can force firmware to do RF-R/W
+		priv->Rf_Mode = RF_OP_By_FW;
+	else
+		priv->Rf_Mode = RF_OP_By_SW_3wire;
+
+
+	rtl8192_phy_updateInitGain(dev);
+	/*--set CCK and OFDM Block "ON"--*/
+	rtl8192_setBBreg(dev, rFPGA0_RFMOD, bCCKEn, 0x1);
+	rtl8192_setBBreg(dev, rFPGA0_RFMOD, bOFDMEn, 0x1);
+
+	if(priv->ResetProgress == RESET_TYPE_NORESET)
+	{
+		//if D or C cut
+		u8 tmpvalue = read_nic_byte(dev, 0x301);
+		if(tmpvalue ==0x03)
+		{
+			priv->bDcut = TRUE;
+			RT_TRACE(COMP_POWER_TRACKING, "D-cut\n");
+		}
+		else
+		{
+			priv->bDcut = FALSE;
+			RT_TRACE(COMP_POWER_TRACKING, "C-cut\n");
+		}
+		dm_initialize_txpower_tracking(dev);
+
+		if(priv->bDcut == TRUE)
+		{
+			u32 i, TempCCk;
+			u32 tmpRegA= rtl8192_QueryBBReg(dev,rOFDM0_XATxIQImbalance,bMaskDWord);
+		//	u32 tmpRegC= rtl8192_QueryBBReg(dev,rOFDM0_XCTxIQImbalance,bMaskDWord);
+			for(i = 0; i<TxBBGainTableLength; i++)
+			{
+				if(tmpRegA == priv->txbbgain_table[i].txbbgain_value)
+				{
+					priv->rfa_txpowertrackingindex= (u8)i;
+					priv->rfa_txpowertrackingindex_real= (u8)i;
+					priv->rfa_txpowertracking_default= priv->rfa_txpowertrackingindex;
+					break;
+				}
+			}
+
+			TempCCk = rtl8192_QueryBBReg(dev, rCCK0_TxFilter1, bMaskByte2);
+
+			for(i=0 ; i<CCKTxBBGainTableLength ; i++)
+			{
+
+				if(TempCCk == priv->cck_txbbgain_table[i].ccktxbb_valuearray[0])
+				{
+					priv->cck_present_attentuation_20Mdefault=(u8) i;
+					break;
+				}
+			}
+			priv->cck_present_attentuation_40Mdefault= 0;
+			priv->cck_present_attentuation_difference= 0;
+			priv->cck_present_attentuation = priv->cck_present_attentuation_20Mdefault;
+
+	//		pMgntInfo->bTXPowerTracking = FALSE;//TEMPLY DISABLE
+		}
+	}
+	write_nic_byte(dev, 0x87, 0x0);
+
+
+#endif
+	return init_status;
+}
+
+#endif
+/* this configures registers for beacon tx and enables it via
+ * rtl8192_beacon_tx_enable(). rtl8192_beacon_tx_disable() might
+ * be used to stop beacon transmission
+ */
+#if 0
+void rtl8192_start_tx_beacon(struct net_device *dev)
+{
+	int i;
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	u16 word;
+	DMESG("Enabling beacon TX");
+	//write_nic_byte(dev, TX_CONF,0xe6);// TX_CONF
+	//rtl8192_init_beacon(dev);
+	//set_nic_txring(dev);
+//	rtl8192_prepare_beacon(dev);
+	rtl8192_irq_disable(dev);
+//	rtl8192_beacon_tx_enable(dev);
+	rtl8192_set_mode(dev,EPROM_CMD_CONFIG);
+	//write_nic_byte(dev,0x9d,0x20); //DMA Poll
+	//write_nic_word(dev,0x7a,0);
+	//write_nic_word(dev,0x7a,0x8000);
+
+
+	word  = read_nic_word(dev, BcnItv);
+	word &= ~BcnItv_BcnItv; // clear Bcn_Itv
+	write_nic_word(dev, BcnItv, word);
+
+	write_nic_word(dev, AtimWnd,
+		       read_nic_word(dev, AtimWnd) &~ AtimWnd_AtimWnd);
+
+	word  = read_nic_word(dev, BCN_INTR_ITV);
+	word &= ~BCN_INTR_ITV_MASK;
+
+	//word |= priv->ieee80211->beacon_interval *
+	//	((priv->txbeaconcount > 1)?(priv->txbeaconcount-1):1);
+	// FIXME:FIXME check if correct ^^ worked with 0x3e8;
+
+	write_nic_word(dev, BCN_INTR_ITV, word);
+
+	//write_nic_word(dev,0x2e,0xe002);
+	//write_nic_dword(dev,0x30,0xb8c7832e);
+	for(i=0; i<ETH_ALEN; i++)
+		write_nic_byte(dev, BSSID+i, priv->ieee80211->beacon_cell_ssid[i]);
+
+//	rtl8192_update_msr(dev);
+
+
+	//write_nic_byte(dev,CONFIG4,3); /* !!!!!!!!!! */
+
+	rtl8192_set_mode(dev, EPROM_CMD_NORMAL);
+
+	rtl8192_irq_enable(dev);
+
+	/* VV !!!!!!!!!! VV*/
+	/*
+	rtl8192_set_mode(dev,EPROM_CMD_CONFIG);
+	write_nic_byte(dev,0x9d,0x00);
+	rtl8192_set_mode(dev,EPROM_CMD_NORMAL);
+*/
+}
+#endif
+/***************************************************************************
+    -------------------------------NET STUFF---------------------------
+***************************************************************************/
+
+static struct net_device_stats *rtl8192_stats(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	return &priv->ieee80211->stats;
+}
+
+bool
+HalTxCheckStuck819xUsb(
+	struct net_device *dev
+	)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u16 		RegTxCounter = read_nic_word(dev, 0x128);
+	bool		bStuck = FALSE;
+	RT_TRACE(COMP_RESET,"%s():RegTxCounter is %d,TxCounter is %d\n",__FUNCTION__,RegTxCounter,priv->TxCounter);
+	if(priv->TxCounter==RegTxCounter)
+		bStuck = TRUE;
+
+	priv->TxCounter = RegTxCounter;
+
+	return bStuck;
+}
+
+/*
+*	<Assumption: RT_TX_SPINLOCK is acquired.>
+*	First added: 2006.11.19 by emily
+*/
+RESET_TYPE
+TxCheckStuck(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u8			QueueID;
+//	PRT_TCB			pTcb;
+//	u8			ResetThreshold;
+	bool			bCheckFwTxCnt = false;
+	//unsigned long flags;
+
+	//
+	// Decide Stuch threshold according to current power save mode
+	//
+
+//     RT_TRACE(COMP_RESET, " ==> TxCheckStuck()\n");
+//	     PlatformAcquireSpinLock(Adapter, RT_TX_SPINLOCK);
+//	     spin_lock_irqsave(&priv->ieee80211->lock,flags);
+	     for (QueueID = 0; QueueID<=BEACON_QUEUE;QueueID ++)
+	     {
+	     		if(QueueID == TXCMD_QUEUE)
+		         continue;
+#if 1
+#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
+			if((skb_queue_len(&priv->ieee80211->skb_waitQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_aggQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_drv_aggQ[QueueID]) == 0))
+#else
+		     	if((skb_queue_len(&priv->ieee80211->skb_waitQ[QueueID]) == 0)  && (skb_queue_len(&priv->ieee80211->skb_aggQ[QueueID]) == 0))
+#endif
+			 	continue;
+#endif
+
+	             bCheckFwTxCnt = true;
+	     }
+//	     PlatformReleaseSpinLock(Adapter, RT_TX_SPINLOCK);
+//	spin_unlock_irqrestore(&priv->ieee80211->lock,flags);
+//	RT_TRACE(COMP_RESET,"bCheckFwTxCnt is %d\n",bCheckFwTxCnt);
+#if 1
+	if(bCheckFwTxCnt)
+	{
+		if(HalTxCheckStuck819xUsb(dev))
+		{
+			RT_TRACE(COMP_RESET, "TxCheckStuck(): Fw indicates no Tx condition! \n");
+			return RESET_TYPE_SILENT;
+		}
+	}
+#endif
+	return RESET_TYPE_NORESET;
+}
+
+bool
+HalRxCheckStuck819xUsb(struct net_device *dev)
+{
+	u16 	RegRxCounter = read_nic_word(dev, 0x130);
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	bool bStuck = FALSE;
+//#ifdef RTL8192SU
+
+//#else
+	static u8	rx_chk_cnt = 0;
+	RT_TRACE(COMP_RESET,"%s(): RegRxCounter is %d,RxCounter is %d\n",__FUNCTION__,RegRxCounter,priv->RxCounter);
+	// If rssi is small, we should check rx for long time because of bad rx.
+	// or maybe it will continuous silent reset every 2 seconds.
+	rx_chk_cnt++;
+	if(priv->undecorated_smoothed_pwdb >= (RateAdaptiveTH_High+5))
+	{
+		rx_chk_cnt = 0;	//high rssi, check rx stuck right now.
+	}
+	else if(priv->undecorated_smoothed_pwdb < (RateAdaptiveTH_High+5) &&
+		((priv->CurrentChannelBW!=HT_CHANNEL_WIDTH_20&&priv->undecorated_smoothed_pwdb>=RateAdaptiveTH_Low_40M) ||
+		(priv->CurrentChannelBW==HT_CHANNEL_WIDTH_20&&priv->undecorated_smoothed_pwdb>=RateAdaptiveTH_Low_20M)) )
+	{
+		if(rx_chk_cnt < 2)
+		{
+			return bStuck;
+		}
+		else
+		{
+			rx_chk_cnt = 0;
+		}
+	}
+	else if(((priv->CurrentChannelBW!=HT_CHANNEL_WIDTH_20&&priv->undecorated_smoothed_pwdb<RateAdaptiveTH_Low_40M) ||
+		(priv->CurrentChannelBW==HT_CHANNEL_WIDTH_20&&priv->undecorated_smoothed_pwdb<RateAdaptiveTH_Low_20M)) &&
+		priv->undecorated_smoothed_pwdb >= VeryLowRSSI)
+	{
+		if(rx_chk_cnt < 4)
+		{
+			//DbgPrint("RSSI < %d && RSSI >= %d, no check this time \n", RateAdaptiveTH_Low, VeryLowRSSI);
+			return bStuck;
+		}
+		else
+		{
+			rx_chk_cnt = 0;
+			//DbgPrint("RSSI < %d && RSSI >= %d, check this time \n", RateAdaptiveTH_Low, VeryLowRSSI);
+		}
+	}
+	else
+	{
+		if(rx_chk_cnt < 8)
+		{
+			//DbgPrint("RSSI <= %d, no check this time \n", VeryLowRSSI);
+			return bStuck;
+		}
+		else
+		{
+			rx_chk_cnt = 0;
+			//DbgPrint("RSSI <= %d, check this time \n", VeryLowRSSI);
+		}
+	}
+//#endif
+
+	if(priv->RxCounter==RegRxCounter)
+		bStuck = TRUE;
+
+	priv->RxCounter = RegRxCounter;
+
+	return bStuck;
+}
+
+RESET_TYPE
+RxCheckStuck(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	//int                     i;
+	bool        bRxCheck = FALSE;
+
+//       RT_TRACE(COMP_RESET," ==> RxCheckStuck()\n");
+	//PlatformAcquireSpinLock(Adapter, RT_RX_SPINLOCK);
+
+	 if(priv->IrpPendingCount > 1)
+	 	bRxCheck = TRUE;
+       //PlatformReleaseSpinLock(Adapter, RT_RX_SPINLOCK);
+
+//       RT_TRACE(COMP_RESET,"bRxCheck is %d \n",bRxCheck);
+	if(bRxCheck)
+	{
+		if(HalRxCheckStuck819xUsb(dev))
+		{
+			RT_TRACE(COMP_RESET, "RxStuck Condition\n");
+			return RESET_TYPE_SILENT;
+		}
+	}
+	return RESET_TYPE_NORESET;
+}
+
+
+/**
+*	This function is called by Checkforhang to check whether we should ask OS to reset driver
+*
+*	\param pAdapter	The adapter context for this miniport
+*
+*	Note:NIC with USB interface sholud not call this function because we cannot scan descriptor
+*	to judge whether there is tx stuck.
+*	Note: This function may be required to be rewrite for Vista OS.
+*	<<<Assumption: Tx spinlock has been acquired >>>
+*
+*	8185 and 8185b does not implement this function. This is added by Emily at 2006.11.24
+*/
+RESET_TYPE
+rtl819x_ifcheck_resetornot(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	RESET_TYPE	TxResetType = RESET_TYPE_NORESET;
+	RESET_TYPE	RxResetType = RESET_TYPE_NORESET;
+	RT_RF_POWER_STATE 	rfState;
+
+#if (defined (RTL8192SU_FPGA_2MAC_VERIFICATION)||defined (RTL8192SU_ASIC_VERIFICATION))
+	return RESET_TYPE_NORESET;
+#endif
+
+	rfState = priv->ieee80211->eRFPowerState;
+
+	TxResetType = TxCheckStuck(dev);
+#if 1
+	if( rfState != eRfOff ||
+		/*ADAPTER_TEST_STATUS_FLAG(Adapter, ADAPTER_STATUS_FW_DOWNLOAD_FAILURE)) &&*/
+		(priv->ieee80211->iw_mode != IW_MODE_ADHOC))
+	{
+		// If driver is in the status of firmware download failure , driver skips RF initialization and RF is
+		// in turned off state. Driver should check whether Rx stuck and do silent reset. And
+		// if driver is in firmware download failure status, driver should initialize RF in the following
+		// silent reset procedure Emily, 2008.01.21
+
+		// Driver should not check RX stuck in IBSS mode because it is required to
+		// set Check BSSID in order to send beacon, however, if check BSSID is
+		// set, STA cannot hear any packet a all. Emily, 2008.04.12
+		RxResetType = RxCheckStuck(dev);
+	}
+#endif
+	if(TxResetType==RESET_TYPE_NORMAL || RxResetType==RESET_TYPE_NORMAL)
+		return RESET_TYPE_NORMAL;
+	else if(TxResetType==RESET_TYPE_SILENT || RxResetType==RESET_TYPE_SILENT){
+		RT_TRACE(COMP_RESET,"%s():silent reset\n",__FUNCTION__);
+		return RESET_TYPE_SILENT;
+	}
+	else
+		return RESET_TYPE_NORESET;
+
+}
+
+void rtl8192_cancel_deferred_work(struct r8192_priv* priv);
+int _rtl8192_up(struct net_device *dev);
+int rtl8192_close(struct net_device *dev);
+
+
+
+void
+CamRestoreAllEntry(	struct net_device *dev)
+{
+	u8 EntryId = 0;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u8*	MacAddr = priv->ieee80211->current_network.bssid;
+
+	static u8	CAM_CONST_ADDR[4][6] = {
+		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
+		{0x00, 0x00, 0x00, 0x00, 0x00, 0x01},
+		{0x00, 0x00, 0x00, 0x00, 0x00, 0x02},
+		{0x00, 0x00, 0x00, 0x00, 0x00, 0x03}};
+	static u8	CAM_CONST_BROAD[] =
+		{0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+
+	RT_TRACE(COMP_SEC, "CamRestoreAllEntry: \n");
+
+
+	if ((priv->ieee80211->pairwise_key_type == KEY_TYPE_WEP40)||
+	    (priv->ieee80211->pairwise_key_type == KEY_TYPE_WEP104))
+	{
+
+		for(EntryId=0; EntryId<4; EntryId++)
+		{
+			{
+				MacAddr = CAM_CONST_ADDR[EntryId];
+				setKey(dev,
+						EntryId ,
+						EntryId,
+						priv->ieee80211->pairwise_key_type,
+						MacAddr,
+						0,
+						NULL);
+			}
+		}
+
+	}
+	else if(priv->ieee80211->pairwise_key_type == KEY_TYPE_TKIP)
+	{
+
+		{
+			if(priv->ieee80211->iw_mode == IW_MODE_ADHOC)
+				setKey(dev,
+						4,
+						0,
+						priv->ieee80211->pairwise_key_type,
+						(u8*)dev->dev_addr,
+						0,
+						NULL);
+			else
+				setKey(dev,
+						4,
+						0,
+						priv->ieee80211->pairwise_key_type,
+						MacAddr,
+						0,
+						NULL);
+		}
+	}
+	else if(priv->ieee80211->pairwise_key_type == KEY_TYPE_CCMP)
+	{
+
+		{
+			if(priv->ieee80211->iw_mode == IW_MODE_ADHOC)
+				setKey(dev,
+						4,
+						0,
+						priv->ieee80211->pairwise_key_type,
+						(u8*)dev->dev_addr,
+						0,
+						NULL);
+			else
+				setKey(dev,
+						4,
+						0,
+						priv->ieee80211->pairwise_key_type,
+						MacAddr,
+						0,
+						NULL);
+		}
+	}
+
+
+
+	if(priv->ieee80211->group_key_type == KEY_TYPE_TKIP)
+	{
+		MacAddr = CAM_CONST_BROAD;
+		for(EntryId=1 ; EntryId<4 ; EntryId++)
+		{
+			{
+				setKey(dev,
+						EntryId,
+						EntryId,
+						priv->ieee80211->group_key_type,
+						MacAddr,
+						0,
+						NULL);
+			}
+		}
+		if(priv->ieee80211->iw_mode == IW_MODE_ADHOC)
+				setKey(dev,
+						0,
+						0,
+						priv->ieee80211->group_key_type,
+						CAM_CONST_ADDR[0],
+						0,
+						NULL);
+	}
+	else if(priv->ieee80211->group_key_type == KEY_TYPE_CCMP)
+	{
+		MacAddr = CAM_CONST_BROAD;
+		for(EntryId=1; EntryId<4 ; EntryId++)
+		{
+			{
+				setKey(dev,
+						EntryId ,
+						EntryId,
+						priv->ieee80211->group_key_type,
+						MacAddr,
+						0,
+						NULL);
+			}
+		}
+
+		if(priv->ieee80211->iw_mode == IW_MODE_ADHOC)
+				setKey(dev,
+						0 ,
+						0,
+						priv->ieee80211->group_key_type,
+						CAM_CONST_ADDR[0],
+						0,
+						NULL);
+	}
+}
+//////////////////////////////////////////////////////////////
+// This function is used to fix Tx/Rx stop bug temporarily.
+// This function will do "system reset" to NIC when Tx or Rx is stuck.
+// The method checking Tx/Rx stuck of this function is supported by FW,
+// which reports Tx and Rx counter to register 0x128 and 0x130.
+//////////////////////////////////////////////////////////////
+void
+rtl819x_ifsilentreset(struct net_device *dev)
+{
+	//OCTET_STRING asocpdu;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u8	reset_times = 0;
+	int reset_status = 0;
+	struct ieee80211_device *ieee = priv->ieee80211;
+
+
+	// 2007.07.20. If we need to check CCK stop, please uncomment this line.
+	//bStuck = Adapter->HalFunc.CheckHWStopHandler(Adapter);
+
+	if(priv->ResetProgress==RESET_TYPE_NORESET)
+	{
+RESET_START:
+
+		RT_TRACE(COMP_RESET,"=========>Reset progress!! \n");
+
+		// Set the variable for reset.
+		priv->ResetProgress = RESET_TYPE_SILENT;
+//		rtl8192_close(dev);
+#if 1
+		down(&priv->wx_sem);
+		if(priv->up == 0)
+		{
+			RT_TRACE(COMP_ERR,"%s():the driver is not up! return\n",__FUNCTION__);
+			up(&priv->wx_sem);
+			return ;
+		}
+		priv->up = 0;
+		RT_TRACE(COMP_RESET,"%s():======>start to down the driver\n",__FUNCTION__);
+//		if(!netif_queue_stopped(dev))
+//			netif_stop_queue(dev);
+
+		rtl8192_rtx_disable(dev);
+		rtl8192_cancel_deferred_work(priv);
+		deinit_hal_dm(dev);
+		del_timer_sync(&priv->watch_dog_timer);
+
+		ieee->sync_scan_hurryup = 1;
+		if(ieee->state == IEEE80211_LINKED)
+		{
+			down(&ieee->wx_sem);
+			printk("ieee->state is IEEE80211_LINKED\n");
+			ieee80211_stop_send_beacons(priv->ieee80211);
+			del_timer_sync(&ieee->associate_timer);
+			#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+			cancel_delayed_work(&ieee->associate_retry_wq);
+			#endif
+			ieee80211_stop_scan(ieee);
+			netif_carrier_off(dev);
+			up(&ieee->wx_sem);
+		}
+		else{
+			printk("ieee->state is NOT LINKED\n");
+			ieee80211_softmac_stop_protocol(priv->ieee80211);			}
+		up(&priv->wx_sem);
+		RT_TRACE(COMP_RESET,"%s():<==========down process is finished\n",__FUNCTION__);
+	//rtl8192_irq_disable(dev);
+		RT_TRACE(COMP_RESET,"%s():===========>start to up the driver\n",__FUNCTION__);
+		reset_status = _rtl8192_up(dev);
+
+		RT_TRACE(COMP_RESET,"%s():<===========up process is finished\n",__FUNCTION__);
+		if(reset_status == -EAGAIN)
+		{
+			if(reset_times < 3)
+			{
+				reset_times++;
+				goto RESET_START;
+			}
+			else
+			{
+				RT_TRACE(COMP_ERR," ERR!!! %s():  Reset Failed!!\n", __FUNCTION__);
+			}
+		}
+#endif
+		ieee->is_silent_reset = 1;
+#if 1
+		EnableHWSecurityConfig8192(dev);
+#if 1
+		if(ieee->state == IEEE80211_LINKED && ieee->iw_mode == IW_MODE_INFRA)
+		{
+			ieee->set_chan(ieee->dev, ieee->current_network.channel);
+
+#if 1
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+			queue_work(ieee->wq, &ieee->associate_complete_wq);
+#else
+			schedule_task(&ieee->associate_complete_wq);
+#endif
+#endif
+
+		}
+		else if(ieee->state == IEEE80211_LINKED && ieee->iw_mode == IW_MODE_ADHOC)
+		{
+			ieee->set_chan(ieee->dev, ieee->current_network.channel);
+			ieee->link_change(ieee->dev);
+
+		//	notify_wx_assoc_event(ieee);
+
+			ieee80211_start_send_beacons(ieee);
+
+			if (ieee->data_hard_resume)
+				ieee->data_hard_resume(ieee->dev);
+			netif_carrier_on(ieee->dev);
+		}
+#endif
+
+		CamRestoreAllEntry(dev);
+
+		priv->ResetProgress = RESET_TYPE_NORESET;
+		priv->reset_count++;
+
+		priv->bForcedSilentReset =false;
+		priv->bResetInProgress = false;
+
+		// For test --> force write UFWP.
+		write_nic_byte(dev, UFWP, 1);
+		RT_TRACE(COMP_RESET, "Reset finished!! ====>[%d]\n", priv->reset_count);
+#endif
+	}
+}
+
+void CAM_read_entry(
+	struct net_device *dev,
+	u32	 		iIndex
+)
+{
+ 	u32 target_command=0;
+	 u32 target_content=0;
+	 u8 entry_i=0;
+	 u32 ulStatus;
+	s32 i=100;
+//	printk("=======>start read CAM\n");
+ 	for(entry_i=0;entry_i<CAM_CONTENT_COUNT;entry_i++)
+ 	{
+   	// polling bit, and No Write enable, and address
+		target_command= entry_i+CAM_CONTENT_COUNT*iIndex;
+		target_command= target_command | BIT31;
+
+	//Check polling bit is clear
+//	mdelay(1);
+#if 1
+		while((i--)>=0)
+		{
+			ulStatus = read_nic_dword(dev, RWCAM);
+			if(ulStatus & BIT31){
+				continue;
+			}
+			else{
+				break;
+			}
+		}
+#endif
+  		write_nic_dword(dev, RWCAM, target_command);
+   	 	RT_TRACE(COMP_SEC,"CAM_read_entry(): WRITE A0: %x \n",target_command);
+   	 //	printk("CAM_read_entry(): WRITE A0: %lx \n",target_command);
+  	 	target_content = read_nic_dword(dev, RCAMO);
+  	 	RT_TRACE(COMP_SEC, "CAM_read_entry(): WRITE A8: %x \n",target_content);
+  	 //	printk("CAM_read_entry(): WRITE A8: %lx \n",target_content);
+ 	}
+	printk("\n");
+}
+
+void rtl819x_update_rxcounts(
+	struct r8192_priv *priv,
+	u32* TotalRxBcnNum,
+	u32* TotalRxDataNum
+)
+{
+	u16 			SlotIndex;
+	u8			i;
+
+	*TotalRxBcnNum = 0;
+	*TotalRxDataNum = 0;
+
+	SlotIndex = (priv->ieee80211->LinkDetectInfo.SlotIndex++)%(priv->ieee80211->LinkDetectInfo.SlotNum);
+	priv->ieee80211->LinkDetectInfo.RxBcnNum[SlotIndex] = priv->ieee80211->LinkDetectInfo.NumRecvBcnInPeriod;
+	priv->ieee80211->LinkDetectInfo.RxDataNum[SlotIndex] = priv->ieee80211->LinkDetectInfo.NumRecvDataInPeriod;
+	for( i=0; i<priv->ieee80211->LinkDetectInfo.SlotNum; i++ ){
+		*TotalRxBcnNum += priv->ieee80211->LinkDetectInfo.RxBcnNum[i];
+		*TotalRxDataNum += priv->ieee80211->LinkDetectInfo.RxDataNum[i];
+	}
+}
+
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+extern	void	rtl819x_watchdog_wqcallback(struct work_struct *work)
+{
+	struct delayed_work *dwork = container_of(work,struct delayed_work,work);
+       struct r8192_priv *priv = container_of(dwork,struct r8192_priv,watch_dog_wq);
+       struct net_device *dev = priv->ieee80211->dev;
+#else
+extern	void	rtl819x_watchdog_wqcallback(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+#endif
+	struct ieee80211_device* ieee = priv->ieee80211;
+	RESET_TYPE	ResetType = RESET_TYPE_NORESET;
+      	static u8	check_reset_cnt=0;
+	bool bBusyTraffic = false;
+
+	if(!priv->up)
+		return;
+	hal_dm_watchdog(dev);
+
+	{//to get busy traffic condition
+		if(ieee->state == IEEE80211_LINKED)
+		{
+			//windows mod 666 to 100.
+			//if(	ieee->LinkDetectInfo.NumRxOkInPeriod> 666 ||
+			//	ieee->LinkDetectInfo.NumTxOkInPeriod> 666 ) {
+			if(	ieee->LinkDetectInfo.NumRxOkInPeriod> 100 ||
+				ieee->LinkDetectInfo.NumTxOkInPeriod> 100 ) {
+				bBusyTraffic = true;
+			}
+			ieee->LinkDetectInfo.NumRxOkInPeriod = 0;
+			ieee->LinkDetectInfo.NumTxOkInPeriod = 0;
+			ieee->LinkDetectInfo.bBusyTraffic = bBusyTraffic;
+		}
+	}
+	//added by amy for AP roaming
+	{
+		if(priv->ieee80211->state == IEEE80211_LINKED && priv->ieee80211->iw_mode == IW_MODE_INFRA)
+		{
+			u32	TotalRxBcnNum = 0;
+			u32	TotalRxDataNum = 0;
+
+			rtl819x_update_rxcounts(priv, &TotalRxBcnNum, &TotalRxDataNum);
+			if((TotalRxBcnNum+TotalRxDataNum) == 0)
+			{
+				#ifdef TODO
+				if(rfState == eRfOff)
+					RT_TRACE(COMP_ERR,"========>%s()\n",__FUNCTION__);
+				#endif
+				printk("===>%s(): AP is power off,connect another one\n",__FUNCTION__);
+			//	Dot11d_Reset(dev);
+				priv->ieee80211->state = IEEE80211_ASSOCIATING;
+				notify_wx_assoc_event(priv->ieee80211);
+				RemovePeerTS(priv->ieee80211,priv->ieee80211->current_network.bssid);
+				ieee->is_roaming = true;
+				priv->ieee80211->link_change(dev);
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+                                queue_work(priv->ieee80211->wq, &priv->ieee80211->associate_procedure_wq);
+#else
+                                schedule_task(&priv->ieee80211->associate_procedure_wq);
+#endif
+
+			}
+		}
+		priv->ieee80211->LinkDetectInfo.NumRecvBcnInPeriod=0;
+		priv->ieee80211->LinkDetectInfo.NumRecvDataInPeriod=0;
+	}
+//	CAM_read_entry(dev,4);
+	//check if reset the driver
+	if(check_reset_cnt++ >= 3 && !ieee->is_roaming)
+	{
+    		ResetType = rtl819x_ifcheck_resetornot(dev);
+		check_reset_cnt = 3;
+		//DbgPrint("Start to check silent reset\n");
+	}
+	//	RT_TRACE(COMP_RESET,"%s():priv->force_reset is %d,priv->ResetProgress is %d, priv->bForcedSilentReset is %d,priv->bDisableNormalResetCheck is %d,ResetType is %d\n",__FUNCTION__,priv->force_reset,priv->ResetProgress,priv->bForcedSilentReset,priv->bDisableNormalResetCheck,ResetType);
+#if 1
+	if( (priv->force_reset) || (priv->ResetProgress==RESET_TYPE_NORESET &&
+		(priv->bForcedSilentReset ||
+		(!priv->bDisableNormalResetCheck && ResetType==RESET_TYPE_SILENT)))) // This is control by OID set in Pomelo
+	{
+		RT_TRACE(COMP_RESET,"%s():priv->force_reset is %d,priv->ResetProgress is %d, priv->bForcedSilentReset is %d,priv->bDisableNormalResetCheck is %d,ResetType is %d\n",__FUNCTION__,priv->force_reset,priv->ResetProgress,priv->bForcedSilentReset,priv->bDisableNormalResetCheck,ResetType);
+		rtl819x_ifsilentreset(dev);
+	}
+#endif
+	priv->force_reset = false;
+	priv->bForcedSilentReset = false;
+	priv->bResetInProgress = false;
+	RT_TRACE(COMP_TRACE, " <==RtUsbCheckForHangWorkItemCallback()\n");
+
+}
+
+void watch_dog_timer_callback(unsigned long data)
+{
+	struct r8192_priv *priv = ieee80211_priv((struct net_device *) data);
+	//printk("===============>watch_dog  timer\n");
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+	queue_delayed_work(priv->priv_wq,&priv->watch_dog_wq, 0);
+#else
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+	schedule_task(&priv->watch_dog_wq);
+#else
+	queue_work(priv->priv_wq,&priv->watch_dog_wq);
+#endif
+#endif
+	mod_timer(&priv->watch_dog_timer, jiffies + MSECS(IEEE80211_WATCH_DOG_TIME));
+#if 0
+	priv->watch_dog_timer.expires = jiffies + MSECS(IEEE80211_WATCH_DOG_TIME);
+	add_timer(&priv->watch_dog_timer);
+#endif
+}
+int _rtl8192_up(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	//int i;
+	int init_status = 0;
+	priv->up=1;
+	priv->ieee80211->ieee_up=1;
+	RT_TRACE(COMP_INIT, "Bringing up iface");
+	init_status = priv->ops->rtl819x_adapter_start(dev);
+	if(!init_status)
+	{
+		RT_TRACE(COMP_ERR,"ERR!!! %s(): initialization is failed!\n", __FUNCTION__);
+		priv->up=priv->ieee80211->ieee_up = 0;
+		return -EAGAIN;
+	}
+	RT_TRACE(COMP_INIT, "start adapter finished\n");
+	rtl8192_rx_enable(dev);
+//	rtl8192_tx_enable(dev);
+	if(priv->ieee80211->state != IEEE80211_LINKED)
+	ieee80211_softmac_start_protocol(priv->ieee80211);
+	ieee80211_reset_queue(priv->ieee80211);
+	watch_dog_timer_callback((unsigned long) dev);
+	if(!netif_queue_stopped(dev))
+		netif_start_queue(dev);
+	else
+		netif_wake_queue(dev);
+
+	/*
+	 * Make sure that drop_unencrypted is initialized as "0"
+	 * No packets will be sent in non-security mode if we had set drop_unencrypted.
+	 * ex, After kill wpa_supplicant process, make the driver up again.
+	 * drop_unencrypted remains as "1", which is set by wpa_supplicant. 2008/12/04.john
+	 */
+	priv->ieee80211->drop_unencrypted = 0;
+
+	return 0;
+}
+
+
+int rtl8192_open(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	int ret;
+	down(&priv->wx_sem);
+	ret = rtl8192_up(dev);
+	up(&priv->wx_sem);
+	return ret;
+
+}
+
+
+int rtl8192_up(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	if (priv->up == 1) return -1;
+
+	return _rtl8192_up(dev);
+}
+
+
+int rtl8192_close(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	int ret;
+
+	down(&priv->wx_sem);
+
+	ret = rtl8192_down(dev);
+
+	up(&priv->wx_sem);
+
+	return ret;
+
+}
+
+int rtl8192_down(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	int i;
+
+	if (priv->up == 0) return -1;
+
+	priv->up=0;
+	priv->ieee80211->ieee_up = 0;
+	RT_TRACE(COMP_DOWN, "==========>%s()\n", __FUNCTION__);
+/* FIXME */
+	if (!netif_queue_stopped(dev))
+		netif_stop_queue(dev);
+
+	rtl8192_rtx_disable(dev);
+	//rtl8192_irq_disable(dev);
+
+ /* Tx related queue release */
+        for(i = 0; i < MAX_QUEUE_SIZE; i++) {
+                skb_queue_purge(&priv->ieee80211->skb_waitQ [i]);
+        }
+        for(i = 0; i < MAX_QUEUE_SIZE; i++) {
+                skb_queue_purge(&priv->ieee80211->skb_aggQ [i]);
+        }
+
+        for(i = 0; i < MAX_QUEUE_SIZE; i++) {
+                skb_queue_purge(&priv->ieee80211->skb_drv_aggQ [i]);
+        }
+
+        //as cancel_delayed_work will del work->timer, so if work is not definedas struct delayed_work, it will corrupt
+//	flush_scheduled_work();
+	rtl8192_cancel_deferred_work(priv);
+	deinit_hal_dm(dev);
+	del_timer_sync(&priv->watch_dog_timer);
+
+
+	ieee80211_softmac_stop_protocol(priv->ieee80211);
+	memset(&priv->ieee80211->current_network, 0 , offsetof(struct ieee80211_network, list));
+	RT_TRACE(COMP_DOWN, "<==========%s()\n", __FUNCTION__);
+
+		return 0;
+}
+
+
+void rtl8192_commit(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	int reset_status = 0;
+	//u8 reset_times = 0;
+	if (priv->up == 0) return ;
+	priv->up = 0;
+
+	rtl8192_cancel_deferred_work(priv);
+	del_timer_sync(&priv->watch_dog_timer);
+	//cancel_delayed_work(&priv->SwChnlWorkItem);
+
+	ieee80211_softmac_stop_protocol(priv->ieee80211);
+
+	//rtl8192_irq_disable(dev);
+	rtl8192_rtx_disable(dev);
+	reset_status = _rtl8192_up(dev);
+
+}
+
+/*
+void rtl8192_restart(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+*/
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+void rtl8192_restart(struct work_struct *work)
+{
+        struct r8192_priv *priv = container_of(work, struct r8192_priv, reset_wq);
+        struct net_device *dev = priv->ieee80211->dev;
+#else
+void rtl8192_restart(struct net_device *dev)
+{
+
+        struct r8192_priv *priv = ieee80211_priv(dev);
+#endif
+
+	down(&priv->wx_sem);
+
+	rtl8192_commit(dev);
+
+	up(&priv->wx_sem);
+}
+
+static void r8192_set_multicast(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	short promisc;
+
+	//down(&priv->wx_sem);
+
+	/* FIXME FIXME */
+
+	promisc = (dev->flags & IFF_PROMISC) ? 1:0;
+
+	if (promisc != priv->promisc)
+	//	rtl8192_commit(dev);
+
+	priv->promisc = promisc;
+
+	//schedule_work(&priv->reset_wq);
+	//up(&priv->wx_sem);
+}
+
+
+int r8192_set_mac_adr(struct net_device *dev, void *mac)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	struct sockaddr *addr = mac;
+
+	down(&priv->wx_sem);
+
+	memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+	schedule_work(&priv->reset_wq);
+#else
+	schedule_task(&priv->reset_wq);
+#endif
+	up(&priv->wx_sem);
+
+	return 0;
+}
+
+/* based on ipw2200 driver */
+int rtl8192_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	struct iwreq *wrq = (struct iwreq *)rq;
+	int ret=-1;
+	struct ieee80211_device *ieee = priv->ieee80211;
+	u32 key[4];
+	u8 broadcast_addr[6] = {0xff,0xff,0xff,0xff,0xff,0xff};
+	u8 zero_addr[6] = {0};
+	struct iw_point *p = &wrq->u.data;
+	struct ieee_param *ipw = NULL;//(struct ieee_param *)wrq->u.data.pointer;
+
+	down(&priv->wx_sem);
+
+
+     if (p->length < sizeof(struct ieee_param) || !p->pointer){
+             ret = -EINVAL;
+             goto out;
+	}
+
+     ipw = (struct ieee_param *)kmalloc(p->length, GFP_KERNEL);
+     if (ipw == NULL){
+             ret = -ENOMEM;
+             goto out;
+     }
+     if (copy_from_user(ipw, p->pointer, p->length)) {
+		kfree(ipw);
+            ret = -EFAULT;
+            goto out;
+	}
+
+	switch (cmd) {
+	    case RTL_IOCTL_WPA_SUPPLICANT:
+	//parse here for HW security
+			if (ipw->cmd == IEEE_CMD_SET_ENCRYPTION)
+			{
+				if (ipw->u.crypt.set_tx)
+				{
+					if (strcmp(ipw->u.crypt.alg, "CCMP") == 0)
+						ieee->pairwise_key_type = KEY_TYPE_CCMP;
+					else if (strcmp(ipw->u.crypt.alg, "TKIP") == 0)
+						ieee->pairwise_key_type = KEY_TYPE_TKIP;
+					else if (strcmp(ipw->u.crypt.alg, "WEP") == 0)
+					{
+						if (ipw->u.crypt.key_len == 13)
+							ieee->pairwise_key_type = KEY_TYPE_WEP104;
+						else if (ipw->u.crypt.key_len == 5)
+							ieee->pairwise_key_type = KEY_TYPE_WEP40;
+					}
+					else
+						ieee->pairwise_key_type = KEY_TYPE_NA;
+
+					if (ieee->pairwise_key_type)
+					{
+				//	FIXME:these two lines below just to fix ipw interface bug, that is, it will never set mode down to driver. So treat it as ADHOC mode, if no association procedure. WB. 2009.02.04
+						if (memcmp(ieee->ap_mac_addr, zero_addr, 6) == 0)
+							ieee->iw_mode = IW_MODE_ADHOC;
+						memcpy((u8*)key, ipw->u.crypt.key, 16);
+						EnableHWSecurityConfig8192(dev);
+					//we fill both index entry and 4th entry for pairwise key as in IPW interface, adhoc will only get here, so we need index entry for its default key serching!
+					//added by WB.
+						setKey(dev, 4, ipw->u.crypt.idx, ieee->pairwise_key_type, (u8*)ieee->ap_mac_addr, 0, key);
+						if (ieee->iw_mode == IW_MODE_ADHOC)
+						setKey(dev, ipw->u.crypt.idx, ipw->u.crypt.idx, ieee->pairwise_key_type, (u8*)ieee->ap_mac_addr, 0, key);
+					}
+				}
+				else //if (ipw->u.crypt.idx) //group key use idx > 0
+				{
+					memcpy((u8*)key, ipw->u.crypt.key, 16);
+					if (strcmp(ipw->u.crypt.alg, "CCMP") == 0)
+						ieee->group_key_type= KEY_TYPE_CCMP;
+					else if (strcmp(ipw->u.crypt.alg, "TKIP") == 0)
+						ieee->group_key_type = KEY_TYPE_TKIP;
+					else if (strcmp(ipw->u.crypt.alg, "WEP") == 0)
+					{
+						if (ipw->u.crypt.key_len == 13)
+							ieee->group_key_type = KEY_TYPE_WEP104;
+						else if (ipw->u.crypt.key_len == 5)
+							ieee->group_key_type = KEY_TYPE_WEP40;
+					}
+					else
+						ieee->group_key_type = KEY_TYPE_NA;
+
+					if (ieee->group_key_type)
+					{
+							setKey(	dev,
+								ipw->u.crypt.idx,
+								ipw->u.crypt.idx,		//KeyIndex
+						     		ieee->group_key_type,	//KeyType
+						            	broadcast_addr,	//MacAddr
+								0,		//DefaultKey
+							      	key);		//KeyContent
+					}
+				}
+			}
+#ifdef JOHN_HWSEC_DEBUG
+		//john's test 0711
+		printk("@@ wrq->u pointer = ");
+		for(i=0;i<wrq->u.data.length;i++){
+			if(i%10==0) printk("\n");
+			printk( "%8x|", ((u32*)wrq->u.data.pointer)[i] );
+		}
+		printk("\n");
+#endif /*JOHN_HWSEC_DEBUG*/
+		ret = ieee80211_wpa_supplicant_ioctl(priv->ieee80211, &wrq->u.data);
+		break;
+
+	    default:
+		ret = -EOPNOTSUPP;
+		break;
+	}
+	kfree(ipw);
+        ipw = NULL;
+out:
+	up(&priv->wx_sem);
+	return ret;
+}
+
+#ifdef RTL8192SU
+u8 rtl8192SU_HwRateToMRate(bool bIsHT, u8 rate,bool bFirstAMPDU)
+{
+
+	u8	ret_rate = 0x02;
+
+	if( bFirstAMPDU )
+	{
+	if(!bIsHT)
+	{
+		switch(rate)
+		{
+
+			case DESC92S_RATE1M:		ret_rate = MGN_1M;		break;
+			case DESC92S_RATE2M:		ret_rate = MGN_2M;		break;
+			case DESC92S_RATE5_5M:		ret_rate = MGN_5_5M;		break;
+			case DESC92S_RATE11M:		ret_rate = MGN_11M;		break;
+			case DESC92S_RATE6M:		ret_rate = MGN_6M;		break;
+			case DESC92S_RATE9M:		ret_rate = MGN_9M;		break;
+			case DESC92S_RATE12M:		ret_rate = MGN_12M;		break;
+			case DESC92S_RATE18M:		ret_rate = MGN_18M;		break;
+			case DESC92S_RATE24M:		ret_rate = MGN_24M;		break;
+			case DESC92S_RATE36M:		ret_rate = MGN_36M;		break;
+			case DESC92S_RATE48M:		ret_rate = MGN_48M;		break;
+			case DESC92S_RATE54M:		ret_rate = MGN_54M;		break;
+
+			default:
+				RT_TRACE(COMP_RECV, "HwRateToMRate90(): Non supported Rate [%x], bIsHT = %d!!!\n", rate, bIsHT);
+					break;
+	}
+		}
+		else
+	{
+		switch(rate)
+		{
+
+			case DESC92S_RATEMCS0:	ret_rate = MGN_MCS0;		break;
+			case DESC92S_RATEMCS1:	ret_rate = MGN_MCS1;		break;
+			case DESC92S_RATEMCS2:	ret_rate = MGN_MCS2;		break;
+			case DESC92S_RATEMCS3:	ret_rate = MGN_MCS3;		break;
+			case DESC92S_RATEMCS4:	ret_rate = MGN_MCS4;		break;
+			case DESC92S_RATEMCS5:	ret_rate = MGN_MCS5;		break;
+			case DESC92S_RATEMCS6:	ret_rate = MGN_MCS6;		break;
+			case DESC92S_RATEMCS7:	ret_rate = MGN_MCS7;		break;
+			case DESC92S_RATEMCS8:	ret_rate = MGN_MCS8;		break;
+			case DESC92S_RATEMCS9:	ret_rate = MGN_MCS9;		break;
+			case DESC92S_RATEMCS10:	ret_rate = MGN_MCS10;	break;
+			case DESC92S_RATEMCS11:	ret_rate = MGN_MCS11;	break;
+			case DESC92S_RATEMCS12:	ret_rate = MGN_MCS12;	break;
+			case DESC92S_RATEMCS13:	ret_rate = MGN_MCS13;	break;
+			case DESC92S_RATEMCS14:	ret_rate = MGN_MCS14;	break;
+			case DESC92S_RATEMCS15:	ret_rate = MGN_MCS15;	break;
+			case DESC92S_RATEMCS32:	ret_rate = (0x80|0x20);	break;
+
+			default:
+					RT_TRACE(COMP_RECV, "HwRateToMRate92S(): Non supported Rate [%x], bIsHT = %d!!!\n",rate, bIsHT );
+				break;
+		}
+
+	}
+	}
+	else
+	{
+		switch(rate)
+		{
+
+			case DESC92S_RATE1M:	ret_rate = MGN_1M;		break;
+			case DESC92S_RATE2M:	ret_rate = MGN_2M;		break;
+			case DESC92S_RATE5_5M:	ret_rate = MGN_5_5M;		break;
+			case DESC92S_RATE11M:	ret_rate = MGN_11M;		break;
+			case DESC92S_RATE6M:	ret_rate = MGN_6M;		break;
+			case DESC92S_RATE9M:	ret_rate = MGN_9M;		break;
+			case DESC92S_RATE12M:	ret_rate = MGN_12M;		break;
+			case DESC92S_RATE18M:	ret_rate = MGN_18M;		break;
+			case DESC92S_RATE24M:	ret_rate = MGN_24M;		break;
+			case DESC92S_RATE36M:	ret_rate = MGN_36M;		break;
+			case DESC92S_RATE48M:	ret_rate = MGN_48M;		break;
+			case DESC92S_RATE54M:	ret_rate = MGN_54M;		break;
+			case DESC92S_RATEMCS0:	ret_rate = MGN_MCS0;		break;
+			case DESC92S_RATEMCS1:	ret_rate = MGN_MCS1;		break;
+			case DESC92S_RATEMCS2:	ret_rate = MGN_MCS2;		break;
+			case DESC92S_RATEMCS3:	ret_rate = MGN_MCS3;		break;
+			case DESC92S_RATEMCS4:	ret_rate = MGN_MCS4;		break;
+			case DESC92S_RATEMCS5:	ret_rate = MGN_MCS5;		break;
+			case DESC92S_RATEMCS6:	ret_rate = MGN_MCS6;		break;
+			case DESC92S_RATEMCS7:	ret_rate = MGN_MCS7;		break;
+			case DESC92S_RATEMCS8:	ret_rate = MGN_MCS8;		break;
+			case DESC92S_RATEMCS9:	ret_rate = MGN_MCS9;		break;
+			case DESC92S_RATEMCS10:	ret_rate = MGN_MCS10;	break;
+			case DESC92S_RATEMCS11:	ret_rate = MGN_MCS11;	break;
+			case DESC92S_RATEMCS12:	ret_rate = MGN_MCS12;	break;
+			case DESC92S_RATEMCS13:	ret_rate = MGN_MCS13;	break;
+			case DESC92S_RATEMCS14:	ret_rate = MGN_MCS14;	break;
+			case DESC92S_RATEMCS15:	ret_rate = MGN_MCS15;	break;
+			case DESC92S_RATEMCS32:	ret_rate = (0x80|0x20);	break;
+
+			default:
+				RT_TRACE(COMP_RECV, "HwRateToMRate92S(): Non supported Rate [%x], bIsHT = %d!!!\n",rate, bIsHT );
+				break;
+			}
+	}
+	return ret_rate;
+}
+#endif
+
+u8 HwRateToMRate90(bool bIsHT, u8 rate)
+{
+	u8  ret_rate = 0xff;
+
+	if(!bIsHT) {
+		switch(rate) {
+			case DESC90_RATE1M:   ret_rate = MGN_1M;         break;
+			case DESC90_RATE2M:   ret_rate = MGN_2M;         break;
+			case DESC90_RATE5_5M: ret_rate = MGN_5_5M;       break;
+			case DESC90_RATE11M:  ret_rate = MGN_11M;        break;
+			case DESC90_RATE6M:   ret_rate = MGN_6M;         break;
+			case DESC90_RATE9M:   ret_rate = MGN_9M;         break;
+			case DESC90_RATE12M:  ret_rate = MGN_12M;        break;
+			case DESC90_RATE18M:  ret_rate = MGN_18M;        break;
+			case DESC90_RATE24M:  ret_rate = MGN_24M;        break;
+			case DESC90_RATE36M:  ret_rate = MGN_36M;        break;
+			case DESC90_RATE48M:  ret_rate = MGN_48M;        break;
+			case DESC90_RATE54M:  ret_rate = MGN_54M;        break;
+
+			default:
+				ret_rate = 0xff;
+				RT_TRACE(COMP_RECV, "HwRateToMRate90(): Non supported Rate [%x], bIsHT = %d!!!\n", rate, bIsHT);
+				break;
+		}
+
+	} else {
+		switch(rate) {
+			case DESC90_RATEMCS0:   ret_rate = MGN_MCS0;    break;
+			case DESC90_RATEMCS1:   ret_rate = MGN_MCS1;    break;
+			case DESC90_RATEMCS2:   ret_rate = MGN_MCS2;    break;
+			case DESC90_RATEMCS3:   ret_rate = MGN_MCS3;    break;
+			case DESC90_RATEMCS4:   ret_rate = MGN_MCS4;    break;
+			case DESC90_RATEMCS5:   ret_rate = MGN_MCS5;    break;
+			case DESC90_RATEMCS6:   ret_rate = MGN_MCS6;    break;
+			case DESC90_RATEMCS7:   ret_rate = MGN_MCS7;    break;
+			case DESC90_RATEMCS8:   ret_rate = MGN_MCS8;    break;
+			case DESC90_RATEMCS9:   ret_rate = MGN_MCS9;    break;
+			case DESC90_RATEMCS10:  ret_rate = MGN_MCS10;   break;
+			case DESC90_RATEMCS11:  ret_rate = MGN_MCS11;   break;
+			case DESC90_RATEMCS12:  ret_rate = MGN_MCS12;   break;
+			case DESC90_RATEMCS13:  ret_rate = MGN_MCS13;   break;
+			case DESC90_RATEMCS14:  ret_rate = MGN_MCS14;   break;
+			case DESC90_RATEMCS15:  ret_rate = MGN_MCS15;   break;
+			case DESC90_RATEMCS32:  ret_rate = (0x80|0x20); break;
+
+			default:
+				ret_rate = 0xff;
+				RT_TRACE(COMP_RECV, "HwRateToMRate90(): Non supported Rate [%x], bIsHT = %d!!!\n",rate, bIsHT);
+				break;
+		}
+	}
+
+	return ret_rate;
+}
+
+/**
+ * Function:     UpdateRxPktTimeStamp
+ * Overview:     Recored down the TSF time stamp when receiving a packet
+ *
+ * Input:
+ *       PADAPTER        Adapter
+ *       PRT_RFD         pRfd,
+ *
+ * Output:
+ *       PRT_RFD         pRfd
+ *                               (pRfd->Status.TimeStampHigh is updated)
+ *                               (pRfd->Status.TimeStampLow is updated)
+ * Return:
+ *               None
+ */
+void UpdateRxPktTimeStamp8190 (struct net_device *dev, struct ieee80211_rx_stats *stats)
+{
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+
+	if(stats->bIsAMPDU && !stats->bFirstMPDU) {
+		stats->mac_time[0] = priv->LastRxDescTSFLow;
+		stats->mac_time[1] = priv->LastRxDescTSFHigh;
+	} else {
+		priv->LastRxDescTSFLow = stats->mac_time[0];
+		priv->LastRxDescTSFHigh = stats->mac_time[1];
+	}
+}
+
+//by amy 080606
+
+long rtl819x_translate_todbm(u8 signal_strength_index	)// 0-100 index.
+{
+	long	signal_power; // in dBm.
+
+	// Translate to dBm (x=0.5y-95).
+	signal_power = (long)((signal_strength_index + 1) >> 1);
+	signal_power -= 95;
+
+	return signal_power;
+}
+
+
+/* 2008/01/22 MH We can not delcare RSSI/EVM total value of sliding window to
+    be a local static. Otherwise, it may increase when we return from S3/S4. The
+    value will be kept in memory or disk. We must delcare the value in adapter
+    and it will be reinitialized when return from S3/S4. */
+void rtl8192_process_phyinfo(struct r8192_priv * priv,u8* buffer, struct ieee80211_rx_stats * pprevious_stats, struct ieee80211_rx_stats * pcurrent_stats)
+{
+	bool bcheck = false;
+	u8	rfpath;
+	u32	nspatial_stream, tmp_val;
+	//u8	i;
+	static u32 slide_rssi_index=0, slide_rssi_statistics=0;
+	static u32 slide_evm_index=0, slide_evm_statistics=0;
+	static u32 last_rssi=0, last_evm=0;
+
+	static u32 slide_beacon_adc_pwdb_index=0, slide_beacon_adc_pwdb_statistics=0;
+	static u32 last_beacon_adc_pwdb=0;
+
+	struct ieee80211_hdr_3addr *hdr;
+	u16 sc ;
+	unsigned int frag,seq;
+	hdr = (struct ieee80211_hdr_3addr *)buffer;
+	sc = le16_to_cpu(hdr->seq_ctl);
+	frag = WLAN_GET_SEQ_FRAG(sc);
+	seq = WLAN_GET_SEQ_SEQ(sc);
+	//cosa add 04292008 to record the sequence number
+	pcurrent_stats->Seq_Num = seq;
+	//
+	// Check whether we should take the previous packet into accounting
+	//
+	if(!pprevious_stats->bIsAMPDU)
+	{
+		// if previous packet is not aggregated packet
+		bcheck = true;
+	}else
+	{
+	#if 0
+		// if previous packet is aggregated packet, and current packet
+		//  (1) is not AMPDU
+		//  (2) is the first packet of one AMPDU
+		// that means the previous packet is the last one aggregated packet
+		if( !pcurrent_stats->bIsAMPDU || pcurrent_stats->bFirstMPDU)
+			bcheck = true;
+	#endif
+	}
+
+
+	if(slide_rssi_statistics++ >= PHY_RSSI_SLID_WIN_MAX)
+	{
+		slide_rssi_statistics = PHY_RSSI_SLID_WIN_MAX;
+		last_rssi = priv->stats.slide_signal_strength[slide_rssi_index];
+		priv->stats.slide_rssi_total -= last_rssi;
+	}
+	priv->stats.slide_rssi_total += pprevious_stats->SignalStrength;
+
+	priv->stats.slide_signal_strength[slide_rssi_index++] = pprevious_stats->SignalStrength;
+	if(slide_rssi_index >= PHY_RSSI_SLID_WIN_MAX)
+		slide_rssi_index = 0;
+
+	// <1> Showed on UI for user, in dbm
+	tmp_val = priv->stats.slide_rssi_total/slide_rssi_statistics;
+	priv->stats.signal_strength = rtl819x_translate_todbm((u8)tmp_val);
+	pcurrent_stats->rssi = priv->stats.signal_strength;
+	//
+	// If the previous packet does not match the criteria, neglect it
+	//
+	if(!pprevious_stats->bPacketMatchBSSID)
+	{
+		if(!pprevious_stats->bToSelfBA)
+			return;
+	}
+
+	if(!bcheck)
+		return;
+
+
+	//rtl8190_process_cck_rxpathsel(priv,pprevious_stats);//only rtl8190 supported
+
+	//
+	// Check RSSI
+	//
+	priv->stats.num_process_phyinfo++;
+
+	/* record the general signal strength to the sliding window. */
+
+
+	// <2> Showed on UI for engineering
+	// hardware does not provide rssi information for each rf path in CCK
+	if(!pprevious_stats->bIsCCK && (pprevious_stats->bPacketToSelf || pprevious_stats->bToSelfBA))
+	{
+		for (rfpath = RF90_PATH_A; rfpath < priv->NumTotalRFPath; rfpath++)
+		{
+                     if (!rtl8192_phy_CheckIsLegalRFPath(priv->ieee80211->dev, rfpath))
+			         continue;
+
+			//Fixed by Jacken 2008-03-20
+			if(priv->stats.rx_rssi_percentage[rfpath] == 0)
+			{
+				priv->stats.rx_rssi_percentage[rfpath] = pprevious_stats->RxMIMOSignalStrength[rfpath];
+				//DbgPrint("MIMO RSSI initialize \n");
+			}
+			if(pprevious_stats->RxMIMOSignalStrength[rfpath]  > priv->stats.rx_rssi_percentage[rfpath])
+			{
+				priv->stats.rx_rssi_percentage[rfpath] =
+					( (priv->stats.rx_rssi_percentage[rfpath]*(Rx_Smooth_Factor-1)) +
+					(pprevious_stats->RxMIMOSignalStrength[rfpath])) /(Rx_Smooth_Factor);
+				priv->stats.rx_rssi_percentage[rfpath] = priv->stats.rx_rssi_percentage[rfpath]  + 1;
+			}
+			else
+			{
+				priv->stats.rx_rssi_percentage[rfpath] =
+					( (priv->stats.rx_rssi_percentage[rfpath]*(Rx_Smooth_Factor-1)) +
+					(pprevious_stats->RxMIMOSignalStrength[rfpath])) /(Rx_Smooth_Factor);
+			}
+			RT_TRACE(COMP_DBG,"priv->stats.rx_rssi_percentage[rfPath]  = %d \n" ,priv->stats.rx_rssi_percentage[rfpath] );
+		}
+	}
+
+
+	//
+	// Check PWDB.
+	//
+	RT_TRACE(COMP_RXDESC, "Smooth %s PWDB = %d\n",
+				pprevious_stats->bIsCCK? "CCK": "OFDM",
+				pprevious_stats->RxPWDBAll);
+
+	if(pprevious_stats->bPacketBeacon)
+	{
+/* record the beacon pwdb to the sliding window. */
+		if(slide_beacon_adc_pwdb_statistics++ >= PHY_Beacon_RSSI_SLID_WIN_MAX)
+		{
+			slide_beacon_adc_pwdb_statistics = PHY_Beacon_RSSI_SLID_WIN_MAX;
+			last_beacon_adc_pwdb = priv->stats.Slide_Beacon_pwdb[slide_beacon_adc_pwdb_index];
+			priv->stats.Slide_Beacon_Total -= last_beacon_adc_pwdb;
+			//DbgPrint("slide_beacon_adc_pwdb_index = %d, last_beacon_adc_pwdb = %d, Adapter->RxStats.Slide_Beacon_Total = %d\n",
+			//	slide_beacon_adc_pwdb_index, last_beacon_adc_pwdb, Adapter->RxStats.Slide_Beacon_Total);
+		}
+		priv->stats.Slide_Beacon_Total += pprevious_stats->RxPWDBAll;
+		priv->stats.Slide_Beacon_pwdb[slide_beacon_adc_pwdb_index] = pprevious_stats->RxPWDBAll;
+		//DbgPrint("slide_beacon_adc_pwdb_index = %d, pPreviousRfd->Status.RxPWDBAll = %d\n", slide_beacon_adc_pwdb_index, pPreviousRfd->Status.RxPWDBAll);
+		slide_beacon_adc_pwdb_index++;
+		if(slide_beacon_adc_pwdb_index >= PHY_Beacon_RSSI_SLID_WIN_MAX)
+			slide_beacon_adc_pwdb_index = 0;
+		pprevious_stats->RxPWDBAll = priv->stats.Slide_Beacon_Total/slide_beacon_adc_pwdb_statistics;
+		if(pprevious_stats->RxPWDBAll >= 3)
+			pprevious_stats->RxPWDBAll -= 3;
+	}
+
+	RT_TRACE(COMP_RXDESC, "Smooth %s PWDB = %d\n",
+				pprevious_stats->bIsCCK? "CCK": "OFDM",
+				pprevious_stats->RxPWDBAll);
+
+
+	if(pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA)
+	{
+		if(priv->undecorated_smoothed_pwdb < 0)	// initialize
+		{
+			priv->undecorated_smoothed_pwdb = pprevious_stats->RxPWDBAll;
+			//DbgPrint("First pwdb initialize \n");
+		}
+#if 1
+		if(pprevious_stats->RxPWDBAll > (u32)priv->undecorated_smoothed_pwdb)
+		{
+			priv->undecorated_smoothed_pwdb =
+					( ((priv->undecorated_smoothed_pwdb)*(Rx_Smooth_Factor-1)) +
+					(pprevious_stats->RxPWDBAll)) /(Rx_Smooth_Factor);
+			priv->undecorated_smoothed_pwdb = priv->undecorated_smoothed_pwdb + 1;
+		}
+		else
+		{
+			priv->undecorated_smoothed_pwdb =
+					( ((priv->undecorated_smoothed_pwdb)*(Rx_Smooth_Factor-1)) +
+					(pprevious_stats->RxPWDBAll)) /(Rx_Smooth_Factor);
+		}
+#else
+		//Fixed by Jacken 2008-03-20
+		if(pPreviousRfd->Status.RxPWDBAll > (u32)pHalData->UndecoratedSmoothedPWDB)
+		{
+			pHalData->UndecoratedSmoothedPWDB =
+					( ((pHalData->UndecoratedSmoothedPWDB)* 5) + (pPreviousRfd->Status.RxPWDBAll)) / 6;
+			pHalData->UndecoratedSmoothedPWDB = pHalData->UndecoratedSmoothedPWDB + 1;
+		}
+		else
+		{
+			pHalData->UndecoratedSmoothedPWDB =
+					( ((pHalData->UndecoratedSmoothedPWDB)* 5) + (pPreviousRfd->Status.RxPWDBAll)) / 6;
+		}
+#endif
+
+	}
+
+	//
+	// Check EVM
+	//
+	/* record the general EVM to the sliding window. */
+	if(pprevious_stats->SignalQuality == 0)
+	{
+	}
+	else
+	{
+		if(pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA){
+			if(slide_evm_statistics++ >= PHY_RSSI_SLID_WIN_MAX){
+				slide_evm_statistics = PHY_RSSI_SLID_WIN_MAX;
+				last_evm = priv->stats.slide_evm[slide_evm_index];
+				priv->stats.slide_evm_total -= last_evm;
+			}
+
+			priv->stats.slide_evm_total += pprevious_stats->SignalQuality;
+
+			priv->stats.slide_evm[slide_evm_index++] = pprevious_stats->SignalQuality;
+			if(slide_evm_index >= PHY_RSSI_SLID_WIN_MAX)
+				slide_evm_index = 0;
+
+			// <1> Showed on UI for user, in percentage.
+			tmp_val = priv->stats.slide_evm_total/slide_evm_statistics;
+			priv->stats.signal_quality = tmp_val;
+			//cosa add 10/11/2007, Showed on UI for user in Windows Vista, for Link quality.
+			priv->stats.last_signal_strength_inpercent = tmp_val;
+		}
+
+		// <2> Showed on UI for engineering
+		if(pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA)
+		{
+			for(nspatial_stream = 0; nspatial_stream<2 ; nspatial_stream++) // 2 spatial stream
+			{
+				if(pprevious_stats->RxMIMOSignalQuality[nspatial_stream] != -1)
+				{
+					if(priv->stats.rx_evm_percentage[nspatial_stream] == 0)	// initialize
+					{
+						priv->stats.rx_evm_percentage[nspatial_stream] = pprevious_stats->RxMIMOSignalQuality[nspatial_stream];
+					}
+					priv->stats.rx_evm_percentage[nspatial_stream] =
+						( (priv->stats.rx_evm_percentage[nspatial_stream]* (Rx_Smooth_Factor-1)) +
+						(pprevious_stats->RxMIMOSignalQuality[nspatial_stream]* 1)) / (Rx_Smooth_Factor);
+				}
+			}
+		}
+	}
+
+
+}
+
+/*-----------------------------------------------------------------------------
+ * Function:	rtl819x_query_rxpwrpercentage()
+ *
+ * Overview:
+ *
+ * Input:		char		antpower
+ *
+ * Output:		NONE
+ *
+ * Return:		0-100 percentage
+ *
+ * Revised History:
+ *	When		Who		Remark
+ *	05/26/2008	amy		Create Version 0 porting from windows code.
+ *
+ *---------------------------------------------------------------------------*/
+static u8 rtl819x_query_rxpwrpercentage(
+	char		antpower
+	)
+{
+	if ((antpower <= -100) || (antpower >= 20))
+	{
+		return	0;
+	}
+	else if (antpower >= 0)
+	{
+		return	100;
+	}
+	else
+	{
+		return	(100+antpower);
+	}
+
+}	/* QueryRxPwrPercentage */
+
+static u8
+rtl819x_evm_dbtopercentage(
+    char value
+    )
+{
+    char ret_val;
+
+    ret_val = value;
+
+    if(ret_val >= 0)
+        ret_val = 0;
+    if(ret_val <= -33)
+        ret_val = -33;
+    ret_val = 0 - ret_val;
+    ret_val*=3;
+	if(ret_val == 99)
+		ret_val = 100;
+    return(ret_val);
+}
+//
+//	Description:
+// 	We want good-looking for signal strength/quality
+//	2007/7/19 01:09, by cosa.
+//
+long
+rtl819x_signal_scale_mapping(
+	long currsig
+	)
+{
+	long retsig;
+
+	// Step 1. Scale mapping.
+	if(currsig >= 61 && currsig <= 100)
+	{
+		retsig = 90 + ((currsig - 60) / 4);
+	}
+	else if(currsig >= 41 && currsig <= 60)
+	{
+		retsig = 78 + ((currsig - 40) / 2);
+	}
+	else if(currsig >= 31 && currsig <= 40)
+	{
+		retsig = 66 + (currsig - 30);
+	}
+	else if(currsig >= 21 && currsig <= 30)
+	{
+		retsig = 54 + (currsig - 20);
+	}
+	else if(currsig >= 5 && currsig <= 20)
+	{
+		retsig = 42 + (((currsig - 5) * 2) / 3);
+	}
+	else if(currsig == 4)
+	{
+		retsig = 36;
+	}
+	else if(currsig == 3)
+	{
+		retsig = 27;
+	}
+	else if(currsig == 2)
+	{
+		retsig = 18;
+	}
+	else if(currsig == 1)
+	{
+		retsig = 9;
+	}
+	else
+	{
+		retsig = currsig;
+	}
+
+	return retsig;
+}
+
+#ifdef RTL8192SU
+/*-----------------------------------------------------------------------------
+ * Function:	QueryRxPhyStatus8192S()
+ *
+ * Overview:
+ *
+ * Input:		NONE
+ *
+ * Output:		NONE
+ *
+ * Return:		NONE
+ *
+ * Revised History:
+ *	When		Who		Remark
+ *	06/01/2007	MHC		Create Version 0.
+ *	06/05/2007	MHC		Accordign to HW's new data sheet, we add CCK and OFDM
+ *						descriptor definition.
+ *	07/04/2007	MHC		According to Jerry and Bryant's document. We read
+ *						ir_isolation and ext_lna for RF's init value and use
+ *						to compensate RSSI after receiving packets.
+ *	09/10/2008	MHC		Modify name and PHY status field for 92SE.
+ *	09/19/2008	MHC		Add CCK/OFDM SS/SQ for 92S series.
+ *
+ *---------------------------------------------------------------------------*/
+static void rtl8192SU_query_rxphystatus(
+	struct r8192_priv * priv,
+	struct ieee80211_rx_stats * pstats,
+	rx_desc_819x_usb	*pDesc,
+	rx_drvinfo_819x_usb  * pdrvinfo,
+	struct ieee80211_rx_stats * precord_stats,
+	bool bpacket_match_bssid,
+	bool bpacket_toself,
+	bool bPacketBeacon,
+	bool bToSelfBA
+	)
+{
+	//PRT_RFD_STATUS		pRtRfdStatus = &(pRfd->Status);
+	//PHY_STS_CCK_8192S_T	*pCck_buf;
+	phy_sts_cck_819xusb_t	*	pcck_buf;
+	phy_ofdm_rx_status_rxsc_sgien_exintfflag* prxsc;
+	//u8				*prxpkt;
+	//u8				i, max_spatial_stream, tmp_rxsnr, tmp_rxevm, rxsc_sgien_exflg;
+	u8				i, max_spatial_stream, rxsc_sgien_exflg;
+	char				rx_pwr[4], rx_pwr_all=0;
+	//long				rx_avg_pwr = 0;
+	//char				rx_snrX, rx_evmX;
+	u8				evm, pwdb_all;
+	u32				RSSI, total_rssi=0;//, total_evm=0;
+//	long				signal_strength_index = 0;
+	u8				is_cck_rate=0;
+	u8				rf_rx_num = 0;
+
+
+
+	priv->stats.numqry_phystatus++;
+
+	is_cck_rate = rx_hal_is_cck_rate(pDesc);
+
+	// Record it for next packet processing
+	memset(precord_stats, 0, sizeof(struct ieee80211_rx_stats));
+	pstats->bPacketMatchBSSID = precord_stats->bPacketMatchBSSID = bpacket_match_bssid;
+	pstats->bPacketToSelf = precord_stats->bPacketToSelf = bpacket_toself;
+	pstats->bIsCCK = precord_stats->bIsCCK = is_cck_rate;//RX_HAL_IS_CCK_RATE(pDrvInfo);
+	pstats->bPacketBeacon = precord_stats->bPacketBeacon = bPacketBeacon;
+	pstats->bToSelfBA = precord_stats->bToSelfBA = bToSelfBA;
+
+#ifndef RTL8192SU
+	phy_sts_ofdm_819xusb_t*	pofdm_buf = NULL;
+	prxpkt = (u8*)pdrvinfo;
+
+	/* Move pointer to the 16th bytes. Phy status start address. */
+	prxpkt += sizeof(rx_drvinfo_819x_usb);
+
+	/* Initial the cck and ofdm buffer pointer */
+	pcck_buf = (phy_sts_cck_819xusb_t *)prxpkt;
+	pofdm_buf = (phy_sts_ofdm_819xusb_t *)prxpkt;
+#endif
+
+	pstats->RxMIMOSignalQuality[0] = -1;
+	pstats->RxMIMOSignalQuality[1] = -1;
+	precord_stats->RxMIMOSignalQuality[0] = -1;
+	precord_stats->RxMIMOSignalQuality[1] = -1;
+
+	if(is_cck_rate)
+	{
+		u8 report;//, tmp_pwdb;
+		//char cck_adc_pwdb[4];
+
+		// CCK Driver info Structure is not the same as OFDM packet.
+		pcck_buf = (phy_sts_cck_819xusb_t *)pdrvinfo;
+
+		//
+		// (1)Hardware does not provide RSSI for CCK
+		//
+
+		//
+		// (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive)
+		//
+
+		priv->stats.numqry_phystatusCCK++;
+
+		if(!priv->bCckHighPower)
+		{
+			report = pcck_buf->cck_agc_rpt & 0xc0;
+			report = report>>6;
+			switch(report)
+			{
+				//Fixed by Jacken from Bryant 2008-03-20
+				//Original value is -38 , -26 , -14 , -2
+				//Fixed value is -35 , -23 , -11 , 6
+				case 0x3:
+					rx_pwr_all = -35 - (pcck_buf->cck_agc_rpt & 0x3e);
+					break;
+				case 0x2:
+					rx_pwr_all = -23 - (pcck_buf->cck_agc_rpt & 0x3e);
+					break;
+				case 0x1:
+					rx_pwr_all = -11 - (pcck_buf->cck_agc_rpt & 0x3e);
+					break;
+				case 0x0:
+					rx_pwr_all = 8 - (pcck_buf->cck_agc_rpt & 0x3e);//6->8
+					break;
+			}
+		}
+		else
+		{
+			report = pdrvinfo->cfosho[0] & 0x60;
+			report = report>>5;
+			switch(report)
+			{
+				case 0x3:
+					rx_pwr_all = -35 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1) ;
+					break;
+				case 0x2:
+					rx_pwr_all = -23 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1);
+					break;
+				case 0x1:
+					rx_pwr_all = -11 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1) ;
+					break;
+				case 0x0:
+					rx_pwr_all = -8 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1) ;//6->-8
+					break;
+			}
+		}
+
+		pwdb_all = rtl819x_query_rxpwrpercentage(rx_pwr_all);//check it
+		pstats->RxPWDBAll = precord_stats->RxPWDBAll = pwdb_all;
+		//pstats->RecvSignalPower = pwdb_all;
+		pstats->RecvSignalPower = rx_pwr_all;
+
+		//
+		// (3) Get Signal Quality (EVM)
+		//
+	//if(bpacket_match_bssid)
+	{
+			u8	sq;
+
+			if(pstats->RxPWDBAll > 40)
+			{
+				sq = 100;
+			}else
+			{
+				sq = pcck_buf->sq_rpt;
+
+				if(pcck_buf->sq_rpt > 64)
+					sq = 0;
+				else if (pcck_buf->sq_rpt < 20)
+					sq = 100;
+				else
+					sq = ((64-sq) * 100) / 44;
+			}
+			pstats->SignalQuality = precord_stats->SignalQuality = sq;
+			pstats->RxMIMOSignalQuality[0] = precord_stats->RxMIMOSignalQuality[0] = sq;
+			pstats->RxMIMOSignalQuality[1] = precord_stats->RxMIMOSignalQuality[1] = -1;
+		}
+	}
+	else
+	{
+		priv->stats.numqry_phystatusHT++;
+
+		// 2008/09/19 MH For 92S debug, RX RF path always enable!!
+		priv->brfpath_rxenable[0] = priv->brfpath_rxenable[1] = TRUE;
+
+		//
+		// (1)Get RSSI for HT rate
+		//
+		//for(i=RF90_PATH_A; i<priv->NumTotalRFPath; i++)
+		for(i=RF90_PATH_A; i<RF90_PATH_MAX; i++)
+		{
+			// 2008/01/30 MH we will judge RF RX path now.
+			if (priv->brfpath_rxenable[i])
+				rf_rx_num++;
+			//else
+			//	continue;
+
+		//if (!rtl8192_phy_CheckIsLegalRFPath(priv->ieee80211->dev, i))
+		//		continue;
+
+			//Fixed by Jacken from Bryant 2008-03-20
+			//Original value is 106
+			//rx_pwr[i] = ((pofdm_buf->trsw_gain_X[i]&0x3F)*2) - 106;
+			rx_pwr[i] = ((pdrvinfo->gain_trsw[i]&0x3F)*2) - 110;
+
+			/* Translate DBM to percentage. */
+			RSSI = rtl819x_query_rxpwrpercentage(rx_pwr[i]);	//check ok
+			total_rssi += RSSI;
+			RT_TRACE(COMP_RF, "RF-%d RXPWR=%x RSSI=%d\n", i, rx_pwr[i], RSSI);
+
+			//Get Rx snr value in DB
+			//tmp_rxsnr =	pofdm_buf->rxsnr_X[i];
+			//rx_snrX = (char)(tmp_rxsnr);
+			//rx_snrX /= 2;
+			//priv->stats.rxSNRdB[i] = (long)rx_snrX;
+			priv->stats.rxSNRdB[i] = (long)(pdrvinfo->rxsnr[i]/2);
+
+			/* Translate DBM to percentage. */
+			//RSSI = rtl819x_query_rxpwrpercentage(rx_pwr[i]);
+			//total_rssi += RSSI;
+
+			/* Record Signal Strength for next packet */
+			//if(bpacket_match_bssid)
+			{
+				pstats->RxMIMOSignalStrength[i] =(u8) RSSI;
+				precord_stats->RxMIMOSignalStrength[i] =(u8) RSSI;
+			}
+		}
+
+
+		//
+		// (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive)
+		//
+		//Fixed by Jacken from Bryant 2008-03-20
+		//Original value is 106
+		//rx_pwr_all = (((pofdm_buf->pwdb_all ) >> 1 )& 0x7f) -106;
+		rx_pwr_all = (((pdrvinfo->pwdb_all ) >> 1 )& 0x7f) -106;
+		pwdb_all = rtl819x_query_rxpwrpercentage(rx_pwr_all);
+
+		pstats->RxPWDBAll = precord_stats->RxPWDBAll = pwdb_all;
+		pstats->RxPower = precord_stats->RxPower =  rx_pwr_all;
+		pstats->RecvSignalPower = rx_pwr_all;
+
+		//
+		// (3)EVM of HT rate
+		//
+		//if(pdrvinfo->RxHT && pdrvinfo->RxRate>=DESC90_RATEMCS8 &&
+		 //	pdrvinfo->RxRate<=DESC90_RATEMCS15)
+		 if(pDesc->RxHT && pDesc->RxMCS>=DESC92S_RATEMCS8 &&
+		 	pDesc->RxMCS<=DESC92S_RATEMCS15)
+			max_spatial_stream = 2; //both spatial stream make sense
+		else
+			max_spatial_stream = 1; //only spatial stream 1 makes sense
+
+		for(i=0; i<max_spatial_stream; i++)
+		{
+			//tmp_rxevm =	pofdm_buf->rxevm_X[i];
+			//rx_evmX = (char)(tmp_rxevm);
+
+			// Do not use shift operation like "rx_evmX >>= 1" because the compilor of free build environment
+			// fill most significant bit to "zero" when doing shifting operation which may change a negative
+			// value to positive one, then the dbm value (which is supposed to be negative)  is not correct anymore.
+			//rx_evmX /= 2;	//dbm
+
+			//evm = rtl819x_evm_dbtopercentage(rx_evmX);
+			evm = rtl819x_evm_dbtopercentage( (pdrvinfo->rxevm[i] /*/ 2*/));	//dbm
+			RT_TRACE(COMP_RF, "RXRATE=%x RXEVM=%x EVM=%s%d\n", pDesc->RxMCS, pdrvinfo->rxevm[i], "%", evm);
+#if 0
+			EVM = SignalScaleMapping(EVM);//make it good looking, from 0~100//=====>from here
+#endif
+
+			//if(bpacket_match_bssid)
+			{
+				if(i==0) // Fill value in RFD, Get the first spatial stream only
+					pstats->SignalQuality = precord_stats->SignalQuality = (u8)(evm & 0xff);
+				pstats->RxMIMOSignalQuality[i] = precord_stats->RxMIMOSignalQuality[i] = (u8)(evm & 0xff);
+			}
+		}
+
+
+		/* record rx statistics for debug */
+		//rxsc_sgien_exflg = pofdm_buf->rxsc_sgien_exflg;
+		prxsc =	(phy_ofdm_rx_status_rxsc_sgien_exintfflag *)&rxsc_sgien_exflg;
+		//if(pdrvinfo->BW)	//40M channel
+		if(pDesc->BW)	//40M channel
+			priv->stats.received_bwtype[1+pdrvinfo->rxsc]++;
+		else				//20M channel
+			priv->stats.received_bwtype[0]++;
+	}
+
+	//UI BSS List signal strength(in percentage), make it good looking, from 0~100.
+	//It is assigned to the BSS List in GetValueFromBeaconOrProbeRsp().
+	if(is_cck_rate)
+	{
+		pstats->SignalStrength = precord_stats->SignalStrength = (u8)(rtl819x_signal_scale_mapping((long)pwdb_all));//PWDB_ALL;//check ok
+
+	}
+	else
+	{
+		//pRfd->Status.SignalStrength = pRecordRfd->Status.SignalStrength = (u8)(SignalScaleMapping(total_rssi/=RF90_PATH_MAX));//(u8)(total_rssi/=RF90_PATH_MAX);
+		// We can judge RX path number now.
+		if (rf_rx_num != 0)
+			pstats->SignalStrength = precord_stats->SignalStrength = (u8)(rtl819x_signal_scale_mapping((long)(total_rssi/=rf_rx_num)));
+	}
+}/* QueryRxPhyStatus8192S */
+#else
+static void rtl8192_query_rxphystatus(
+	struct r8192_priv * priv,
+	struct ieee80211_rx_stats * pstats,
+	rx_drvinfo_819x_usb  * pdrvinfo,
+	struct ieee80211_rx_stats * precord_stats,
+	bool bpacket_match_bssid,
+	bool bpacket_toself,
+	bool bPacketBeacon,
+	bool bToSelfBA
+	)
+{
+	//PRT_RFD_STATUS		pRtRfdStatus = &(pRfd->Status);
+	phy_sts_ofdm_819xusb_t*	pofdm_buf;
+	phy_sts_cck_819xusb_t	*	pcck_buf;
+	phy_ofdm_rx_status_rxsc_sgien_exintfflag* prxsc;
+	u8				*prxpkt;
+	u8				i, max_spatial_stream, tmp_rxsnr, tmp_rxevm, rxsc_sgien_exflg;
+	char				rx_pwr[4], rx_pwr_all=0;
+	//long				rx_avg_pwr = 0;
+	char				rx_snrX, rx_evmX;
+	u8				evm, pwdb_all;
+	u32				RSSI, total_rssi=0;//, total_evm=0;
+//	long				signal_strength_index = 0;
+	u8				is_cck_rate=0;
+	u8				rf_rx_num = 0;
+
+
+	priv->stats.numqry_phystatus++;
+
+	is_cck_rate = rx_hal_is_cck_rate(pdrvinfo);
+
+	// Record it for next packet processing
+	memset(precord_stats, 0, sizeof(struct ieee80211_rx_stats));
+	pstats->bPacketMatchBSSID = precord_stats->bPacketMatchBSSID = bpacket_match_bssid;
+	pstats->bPacketToSelf = precord_stats->bPacketToSelf = bpacket_toself;
+	pstats->bIsCCK = precord_stats->bIsCCK = is_cck_rate;//RX_HAL_IS_CCK_RATE(pDrvInfo);
+	pstats->bPacketBeacon = precord_stats->bPacketBeacon = bPacketBeacon;
+	pstats->bToSelfBA = precord_stats->bToSelfBA = bToSelfBA;
+
+	prxpkt = (u8*)pdrvinfo;
+
+	/* Move pointer to the 16th bytes. Phy status start address. */
+	prxpkt += sizeof(rx_drvinfo_819x_usb);
+
+	/* Initial the cck and ofdm buffer pointer */
+	pcck_buf = (phy_sts_cck_819xusb_t *)prxpkt;
+	pofdm_buf = (phy_sts_ofdm_819xusb_t *)prxpkt;
+
+	pstats->RxMIMOSignalQuality[0] = -1;
+	pstats->RxMIMOSignalQuality[1] = -1;
+	precord_stats->RxMIMOSignalQuality[0] = -1;
+	precord_stats->RxMIMOSignalQuality[1] = -1;
+
+	if(is_cck_rate)
+	{
+		//
+		// (1)Hardware does not provide RSSI for CCK
+		//
+
+		//
+		// (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive)
+		//
+		u8 report;//, cck_agc_rpt;
+
+		priv->stats.numqry_phystatusCCK++;
+
+		if(!priv->bCckHighPower)
+		{
+			report = pcck_buf->cck_agc_rpt & 0xc0;
+			report = report>>6;
+			switch(report)
+			{
+				//Fixed by Jacken from Bryant 2008-03-20
+				//Original value is -38 , -26 , -14 , -2
+				//Fixed value is -35 , -23 , -11 , 6
+				case 0x3:
+					rx_pwr_all = -35 - (pcck_buf->cck_agc_rpt & 0x3e);
+					break;
+				case 0x2:
+					rx_pwr_all = -23 - (pcck_buf->cck_agc_rpt & 0x3e);
+					break;
+				case 0x1:
+					rx_pwr_all = -11 - (pcck_buf->cck_agc_rpt & 0x3e);
+					break;
+				case 0x0:
+					rx_pwr_all = 6 - (pcck_buf->cck_agc_rpt & 0x3e);
+					break;
+			}
+		}
+		else
+		{
+			report = pcck_buf->cck_agc_rpt & 0x60;
+			report = report>>5;
+			switch(report)
+			{
+				case 0x3:
+					rx_pwr_all = -35 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1) ;
+					break;
+				case 0x2:
+					rx_pwr_all = -23 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1);
+					break;
+				case 0x1:
+					rx_pwr_all = -11 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1) ;
+					break;
+				case 0x0:
+					rx_pwr_all = 6 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1) ;
+					break;
+			}
+		}
+
+		pwdb_all = rtl819x_query_rxpwrpercentage(rx_pwr_all);
+		pstats->RxPWDBAll = precord_stats->RxPWDBAll = pwdb_all;
+		pstats->RecvSignalPower = pwdb_all;
+
+		//
+		// (3) Get Signal Quality (EVM)
+		//
+		//if(bpacket_match_bssid)
+		{
+			u8	sq;
+
+			if(pstats->RxPWDBAll > 40)
+			{
+				sq = 100;
+			}else
+			{
+				sq = pcck_buf->sq_rpt;
+
+				if(pcck_buf->sq_rpt > 64)
+					sq = 0;
+				else if (pcck_buf->sq_rpt < 20)
+					sq = 100;
+				else
+					sq = ((64-sq) * 100) / 44;
+			}
+			pstats->SignalQuality = precord_stats->SignalQuality = sq;
+			pstats->RxMIMOSignalQuality[0] = precord_stats->RxMIMOSignalQuality[0] = sq;
+			pstats->RxMIMOSignalQuality[1] = precord_stats->RxMIMOSignalQuality[1] = -1;
+		}
+	}
+	else
+	{
+		priv->stats.numqry_phystatusHT++;
+		//
+		// (1)Get RSSI for HT rate
+		//
+		for(i=RF90_PATH_A; i<priv->NumTotalRFPath; i++)
+		{
+			// 2008/01/30 MH we will judge RF RX path now.
+			if (priv->brfpath_rxenable[i])
+				rf_rx_num++;
+			else
+				continue;
+
+		if (!rtl8192_phy_CheckIsLegalRFPath(priv->ieee80211->dev, i))
+				continue;
+
+			//Fixed by Jacken from Bryant 2008-03-20
+			//Original value is 106
+			rx_pwr[i] = ((pofdm_buf->trsw_gain_X[i]&0x3F)*2) - 106;
+
+			//Get Rx snr value in DB
+			tmp_rxsnr =	pofdm_buf->rxsnr_X[i];
+			rx_snrX = (char)(tmp_rxsnr);
+			//rx_snrX >>= 1;;
+			rx_snrX /= 2;
+			priv->stats.rxSNRdB[i] = (long)rx_snrX;
+
+			/* Translate DBM to percentage. */
+			RSSI = rtl819x_query_rxpwrpercentage(rx_pwr[i]);
+			total_rssi += RSSI;
+
+			/* Record Signal Strength for next packet */
+			//if(bpacket_match_bssid)
+			{
+				pstats->RxMIMOSignalStrength[i] =(u8) RSSI;
+				precord_stats->RxMIMOSignalStrength[i] =(u8) RSSI;
+			}
+		}
+
+
+		//
+		// (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive)
+		//
+		//Fixed by Jacken from Bryant 2008-03-20
+		//Original value is 106
+		rx_pwr_all = (((pofdm_buf->pwdb_all ) >> 1 )& 0x7f) -106;
+		pwdb_all = rtl819x_query_rxpwrpercentage(rx_pwr_all);
+
+		pstats->RxPWDBAll = precord_stats->RxPWDBAll = pwdb_all;
+		pstats->RxPower = precord_stats->RxPower =  rx_pwr_all;
+
+		//
+		// (3)EVM of HT rate
+		//
+		if(pdrvinfo->RxHT && pdrvinfo->RxRate>=DESC90_RATEMCS8 &&
+		 	pdrvinfo->RxRate<=DESC90_RATEMCS15)
+			max_spatial_stream = 2; //both spatial stream make sense
+		else
+			max_spatial_stream = 1; //only spatial stream 1 makes sense
+
+		for(i=0; i<max_spatial_stream; i++)
+		{
+			tmp_rxevm =	pofdm_buf->rxevm_X[i];
+			rx_evmX = (char)(tmp_rxevm);
+
+			// Do not use shift operation like "rx_evmX >>= 1" because the compilor of free build environment
+			// fill most significant bit to "zero" when doing shifting operation which may change a negative
+			// value to positive one, then the dbm value (which is supposed to be negative)  is not correct anymore.
+			rx_evmX /= 2;	//dbm
+
+			evm = rtl819x_evm_dbtopercentage(rx_evmX);
+#if 0
+			EVM = SignalScaleMapping(EVM);//make it good looking, from 0~100
+#endif
+			//if(bpacket_match_bssid)
+			{
+				if(i==0) // Fill value in RFD, Get the first spatial stream only
+					pstats->SignalQuality = precord_stats->SignalQuality = (u8)(evm & 0xff);
+				pstats->RxMIMOSignalQuality[i] = precord_stats->RxMIMOSignalQuality[i] = (u8)(evm & 0xff);
+			}
+		}
+
+
+		/* record rx statistics for debug */
+		rxsc_sgien_exflg = pofdm_buf->rxsc_sgien_exflg;
+		prxsc =	(phy_ofdm_rx_status_rxsc_sgien_exintfflag *)&rxsc_sgien_exflg;
+		if(pdrvinfo->BW)	//40M channel
+			priv->stats.received_bwtype[1+prxsc->rxsc]++;
+		else				//20M channel
+			priv->stats.received_bwtype[0]++;
+	}
+
+	//UI BSS List signal strength(in percentage), make it good looking, from 0~100.
+	//It is assigned to the BSS List in GetValueFromBeaconOrProbeRsp().
+	if(is_cck_rate)
+	{
+		pstats->SignalStrength = precord_stats->SignalStrength = (u8)(rtl819x_signal_scale_mapping((long)pwdb_all));//PWDB_ALL;
+
+	}
+	else
+	{
+		//pRfd->Status.SignalStrength = pRecordRfd->Status.SignalStrength = (u8)(SignalScaleMapping(total_rssi/=RF90_PATH_MAX));//(u8)(total_rssi/=RF90_PATH_MAX);
+		// We can judge RX path number now.
+		if (rf_rx_num != 0)
+			pstats->SignalStrength = precord_stats->SignalStrength = (u8)(rtl819x_signal_scale_mapping((long)(total_rssi/=rf_rx_num)));
+	}
+}	/* QueryRxPhyStatus8190Pci */
+#endif
+
+void
+rtl8192_record_rxdesc_forlateruse(
+	struct ieee80211_rx_stats *	psrc_stats,
+	struct ieee80211_rx_stats *	ptarget_stats
+)
+{
+	ptarget_stats->bIsAMPDU = psrc_stats->bIsAMPDU;
+	ptarget_stats->bFirstMPDU = psrc_stats->bFirstMPDU;
+	ptarget_stats->Seq_Num = psrc_stats->Seq_Num;
+}
+
+#ifdef RTL8192SU
+static void rtl8192SU_query_rxphystatus(
+	struct r8192_priv * priv,
+	struct ieee80211_rx_stats * pstats,
+	rx_desc_819x_usb	*pDesc,
+	rx_drvinfo_819x_usb  * pdrvinfo,
+	struct ieee80211_rx_stats * precord_stats,
+	bool bpacket_match_bssid,
+	bool bpacket_toself,
+	bool bPacketBeacon,
+	bool bToSelfBA
+	);
+void rtl8192SU_TranslateRxSignalStuff(struct sk_buff *skb,
+				   struct ieee80211_rx_stats * pstats,
+				   rx_desc_819x_usb	*pDesc,
+                                   rx_drvinfo_819x_usb  *pdrvinfo)
+{
+	// TODO: We must only check packet for current MAC address. Not finish
+	rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
+	struct net_device *dev=info->dev;
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	bool bpacket_match_bssid, bpacket_toself;
+	bool bPacketBeacon=FALSE, bToSelfBA=FALSE;
+	static struct ieee80211_rx_stats  previous_stats;
+	struct ieee80211_hdr_3addr *hdr;//by amy
+       u16 fc,type;
+
+	// Get Signal Quality for only RX data queue (but not command queue)
+
+	u8* tmp_buf;
+	//u16 tmp_buf_len = 0;
+	u8  *praddr;
+
+	/* Get MAC frame start address. */
+	tmp_buf = (u8*)skb->data;// + get_rxpacket_shiftbytes_819xusb(pstats);
+
+	hdr = (struct ieee80211_hdr_3addr *)tmp_buf;
+	fc = le16_to_cpu(hdr->frame_ctl);
+	type = WLAN_FC_GET_TYPE(fc);
+	praddr = hdr->addr1;
+
+	/* Check if the received packet is acceptabe. */
+	bpacket_match_bssid = ((IEEE80211_FTYPE_CTL != type) &&
+                                			(eqMacAddr(priv->ieee80211->current_network.bssid,  (fc & IEEE80211_FCTL_TODS)? hdr->addr1 : (fc & IEEE80211_FCTL_FROMDS )? hdr->addr2 : hdr->addr3))
+                                				 && (!pstats->bHwError) && (!pstats->bCRC)&& (!pstats->bICV));
+	bpacket_toself =  bpacket_match_bssid & (eqMacAddr(praddr, priv->ieee80211->dev->dev_addr));
+
+#if 1//cosa
+		if(WLAN_FC_GET_FRAMETYPE(fc)== IEEE80211_STYPE_BEACON)
+		{
+			bPacketBeacon = true;
+			//DbgPrint("Beacon 2, MatchBSSID = %d, ToSelf = %d \n", bPacketMatchBSSID, bPacketToSelf);
+		}
+		if(WLAN_FC_GET_FRAMETYPE(fc) == IEEE80211_STYPE_BLOCKACK)
+		{
+			if((eqMacAddr(praddr,dev->dev_addr)))
+				bToSelfBA = true;
+				//DbgPrint("BlockAck, MatchBSSID = %d, ToSelf = %d \n", bPacketMatchBSSID, bPacketToSelf);
+		}
+
+#endif
+
+
+	if(bpacket_match_bssid)
+	{
+		priv->stats.numpacket_matchbssid++;
+	}
+	if(bpacket_toself){
+		priv->stats.numpacket_toself++;
+	}
+	//
+	// Process PHY information for previous packet (RSSI/PWDB/EVM)
+	//
+	// Because phy information is contained in the last packet of AMPDU only, so driver
+	// should process phy information of previous packet
+	rtl8192_process_phyinfo(priv, tmp_buf, &previous_stats, pstats);
+	rtl8192SU_query_rxphystatus(priv, pstats, pDesc, pdrvinfo, &previous_stats, bpacket_match_bssid,bpacket_toself,bPacketBeacon,bToSelfBA);
+	rtl8192_record_rxdesc_forlateruse(pstats, &previous_stats);
+
+}
+#else
+void TranslateRxSignalStuff819xUsb(struct sk_buff *skb,
+				   struct ieee80211_rx_stats * pstats,
+                                   rx_drvinfo_819x_usb  *pdrvinfo)
+{
+	// TODO: We must only check packet for current MAC address. Not finish
+	rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
+	struct net_device *dev=info->dev;
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	bool bpacket_match_bssid, bpacket_toself;
+	bool bPacketBeacon=FALSE, bToSelfBA=FALSE;
+	static struct ieee80211_rx_stats  previous_stats;
+	struct ieee80211_hdr_3addr *hdr;//by amy
+       u16 fc,type;
+
+	// Get Signal Quality for only RX data queue (but not command queue)
+
+	u8* tmp_buf;
+	//u16 tmp_buf_len = 0;
+	u8  *praddr;
+
+	/* Get MAC frame start address. */
+	tmp_buf = (u8*)skb->data;// + get_rxpacket_shiftbytes_819xusb(pstats);
+
+	hdr = (struct ieee80211_hdr_3addr *)tmp_buf;
+	fc = le16_to_cpu(hdr->frame_ctl);
+	type = WLAN_FC_GET_TYPE(fc);
+	praddr = hdr->addr1;
+
+	/* Check if the received packet is acceptabe. */
+	bpacket_match_bssid = ((IEEE80211_FTYPE_CTL != type) &&
+                                			(eqMacAddr(priv->ieee80211->current_network.bssid,  (fc & IEEE80211_FCTL_TODS)? hdr->addr1 : (fc & IEEE80211_FCTL_FROMDS )? hdr->addr2 : hdr->addr3))
+                                				 && (!pstats->bHwError) && (!pstats->bCRC)&& (!pstats->bICV));
+	bpacket_toself =  bpacket_match_bssid & (eqMacAddr(praddr, priv->ieee80211->dev->dev_addr));
+
+#if 1//cosa
+		if(WLAN_FC_GET_FRAMETYPE(fc)== IEEE80211_STYPE_BEACON)
+		{
+			bPacketBeacon = true;
+			//DbgPrint("Beacon 2, MatchBSSID = %d, ToSelf = %d \n", bPacketMatchBSSID, bPacketToSelf);
+		}
+		if(WLAN_FC_GET_FRAMETYPE(fc) == IEEE80211_STYPE_BLOCKACK)
+		{
+			if((eqMacAddr(praddr,dev->dev_addr)))
+				bToSelfBA = true;
+				//DbgPrint("BlockAck, MatchBSSID = %d, ToSelf = %d \n", bPacketMatchBSSID, bPacketToSelf);
+		}
+
+#endif
+
+
+	if(bpacket_match_bssid)
+	{
+		priv->stats.numpacket_matchbssid++;
+	}
+	if(bpacket_toself){
+		priv->stats.numpacket_toself++;
+	}
+	//
+	// Process PHY information for previous packet (RSSI/PWDB/EVM)
+	//
+	// Because phy information is contained in the last packet of AMPDU only, so driver
+	// should process phy information of previous packet
+	rtl8192_process_phyinfo(priv, tmp_buf, &previous_stats, pstats);
+	rtl8192_query_rxphystatus(priv, pstats, pdrvinfo, &previous_stats, bpacket_match_bssid,bpacket_toself,bPacketBeacon,bToSelfBA);
+	rtl8192_record_rxdesc_forlateruse(pstats, &previous_stats);
+
+}
+#endif
+
+/**
+* Function:	UpdateReceivedRateHistogramStatistics
+* Overview:	Recored down the received data rate
+*
+* Input:
+* 	struct net_device *dev
+*	struct ieee80211_rx_stats *stats
+*
+* Output:
+*
+*			(priv->stats.ReceivedRateHistogram[] is updated)
+* Return:
+*		None
+*/
+void
+UpdateReceivedRateHistogramStatistics8190(
+	struct net_device *dev,
+	struct ieee80211_rx_stats *stats
+	)
+{
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+    	u32 rcvType=1;   //0: Total, 1:OK, 2:CRC, 3:ICV
+    	u32 rateIndex;
+    	u32 preamble_guardinterval;  //1: short preamble/GI, 0: long preamble/GI
+
+
+    	if(stats->bCRC)
+       	rcvType = 2;
+   	else if(stats->bICV)
+       	rcvType = 3;
+
+   	if(stats->bShortPreamble)
+       	preamble_guardinterval = 1;// short
+    	else
+       	preamble_guardinterval = 0;// long
+
+	switch(stats->rate)
+	{
+		//
+		// CCK rate
+		//
+		case MGN_1M:    rateIndex = 0;  break;
+		case MGN_2M:    rateIndex = 1;  break;
+		case MGN_5_5M:  rateIndex = 2;  break;
+		case MGN_11M:   rateIndex = 3;  break;
+		//
+		// Legacy OFDM rate
+		//
+		case MGN_6M:    rateIndex = 4;  break;
+		case MGN_9M:    rateIndex = 5;  break;
+		case MGN_12M:   rateIndex = 6;  break;
+		case MGN_18M:   rateIndex = 7;  break;
+		case MGN_24M:   rateIndex = 8;  break;
+		case MGN_36M:   rateIndex = 9;  break;
+		case MGN_48M:   rateIndex = 10; break;
+		case MGN_54M:   rateIndex = 11; break;
+		//
+		// 11n High throughput rate
+		//
+		case MGN_MCS0:  rateIndex = 12; break;
+		case MGN_MCS1:  rateIndex = 13; break;
+		case MGN_MCS2:  rateIndex = 14; break;
+		case MGN_MCS3:  rateIndex = 15; break;
+		case MGN_MCS4:  rateIndex = 16; break;
+		case MGN_MCS5:  rateIndex = 17; break;
+		case MGN_MCS6:  rateIndex = 18; break;
+		case MGN_MCS7:  rateIndex = 19; break;
+		case MGN_MCS8:  rateIndex = 20; break;
+		case MGN_MCS9:  rateIndex = 21; break;
+		case MGN_MCS10: rateIndex = 22; break;
+		case MGN_MCS11: rateIndex = 23; break;
+		case MGN_MCS12: rateIndex = 24; break;
+		case MGN_MCS13: rateIndex = 25; break;
+		case MGN_MCS14: rateIndex = 26; break;
+		case MGN_MCS15: rateIndex = 27; break;
+		default:        rateIndex = 28; break;
+	}
+    priv->stats.received_preamble_GI[preamble_guardinterval][rateIndex]++;
+    priv->stats.received_rate_histogram[0][rateIndex]++; //total
+    priv->stats.received_rate_histogram[rcvType][rateIndex]++;
+}
+
+#ifdef RTL8192SU
+void rtl8192SU_query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats, bool bIsRxAggrSubframe)
+{
+	rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
+	struct net_device *dev=info->dev;
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	//rx_desc_819x_usb *desc = (rx_desc_819x_usb *)skb->data;
+	rx_drvinfo_819x_usb  *driver_info = NULL;
+
+	//PRT_RFD_STATUS				pRtRfdStatus = &pRfd->Status;
+	//PHAL_DATA_8192SUSB			pHalData = GET_HAL_DATA(Adapter);
+	//pu1Byte		pDesc = (pu1Byte)pDescIn;
+	//PRX_DRIVER_INFO_8192S		pDrvInfo;
+
+#ifdef USB_RX_AGGREGATION_SUPPORT//FIXLZM
+	//if (bIsRxAggrSubframe)
+		rx_desc_819x_usb_aggr_subframe *desc = (rx_desc_819x_usb_aggr_subframe *)skb->data;
+	else
+#endif
+	rx_desc_819x_usb *desc = (rx_desc_819x_usb *)skb->data;
+
+	if(0)
+	{
+		int m = 0;
+		printk("========================");
+		for(m=0; m<skb->len; m++){
+			if((m%32) == 0)
+				printk("\n");
+			printk("%2x ",((u8*)skb->data)[m]);
+		}
+		printk("\n========================\n");
+
+	}
+
+
+	//
+	//Get Rx Descriptor Raw Information
+	//
+	stats->Length = desc->Length ;
+	stats->RxDrvInfoSize = desc->RxDrvInfoSize*RX_DRV_INFO_SIZE_UNIT;
+	stats->RxBufShift = (desc->Shift)&0x03;
+	stats->bICV = desc->ICV;
+	stats->bCRC = desc->CRC32;
+	stats->bHwError = stats->bCRC|stats->bICV;
+	stats->Decrypted = !desc->SWDec;//RTL8190 set this bit to indicate that Hw does not decrypt packet
+	stats->bIsAMPDU = (desc->AMSDU==1);
+	stats->bFirstMPDU = (desc->PAGGR==1) && (desc->FAGGR==1);
+	stats->bShortPreamble = desc->SPLCP;
+	stats->RxIs40MHzPacket = (desc->BW==1);
+	stats->TimeStampLow = desc->TSFL;
+
+	if((desc->FAGGR==1) || (desc->PAGGR==1))
+	{// Rx A-MPDU
+		RT_TRACE(COMP_RXDESC, "FirstAGGR = %d, PartAggr = %d\n", desc->FAGGR, desc->PAGGR);
+	}
+//YJ,test,090310
+if(stats->bHwError)
+{
+	if(stats->bICV)
+		printk("%s: Receive ICV error!!!!!!!!!!!!!!!!!!!!!!\n", __FUNCTION__);
+	if(stats->bCRC)
+		printk("%s: Receive CRC error!!!!!!!!!!!!!!!!!!!!!!\n", __FUNCTION__);
+}
+
+	if(IS_UNDER_11N_AES_MODE(priv->ieee80211))
+	{
+		// Always received ICV error packets in AES mode.
+		// This fixed HW later MIC write bug.
+		if(stats->bICV && !stats->bCRC)
+		{
+			stats->bICV = FALSE;
+			stats->bHwError = FALSE;
+		}
+	}
+
+	// Transform HwRate to MRate
+	if(!stats->bHwError)
+		//stats->DataRate = HwRateToMRate(
+		//	(BOOLEAN)GET_RX_DESC_RXHT(pDesc),
+		//	(u1Byte)GET_RX_DESC_RXMCS(pDesc),
+		//	(BOOLEAN)GET_RX_DESC_PAGGR(pDesc));
+		stats->rate = rtl8192SU_HwRateToMRate(desc->RxHT, desc->RxMCS, desc->PAGGR);
+	else
+		stats->rate = MGN_1M;
+
+	//
+	// Collect Rx rate/AMPDU/TSFL
+	//
+	//UpdateRxdRateHistogramStatistics8192S(Adapter, pRfd);
+	//UpdateRxAMPDUHistogramStatistics8192S(Adapter, pRfd);
+	//UpdateRxPktTimeStamp8192S(Adapter, pRfd);
+	UpdateReceivedRateHistogramStatistics8190(dev, stats);
+	//UpdateRxAMPDUHistogramStatistics8192S(dev, stats);	//FIXLZM
+	UpdateRxPktTimeStamp8190(dev, stats);
+
+	//
+	// Get PHY Status and RSVD parts.
+	// <Roger_Notes> It only appears on last aggregated packet.
+	//
+	if (desc->PHYStatus)
+	{
+		//driver_info = (rx_drvinfo_819x_usb *)(skb->data + RX_DESC_SIZE + stats->RxBufShift);
+		driver_info = (rx_drvinfo_819x_usb *)(skb->data + sizeof(rx_desc_819x_usb) + \
+				stats->RxBufShift);
+		if(0)
+		{
+			int m = 0;
+			printk("========================\n");
+			printk("RX_DESC_SIZE:%d, RxBufShift:%d, RxDrvInfoSize:%d\n",
+					RX_DESC_SIZE, stats->RxBufShift, stats->RxDrvInfoSize);
+			for(m=0; m<32; m++){
+			       printk("%2x ",((u8*)driver_info)[m]);
+			}
+			printk("\n========================\n");
+
+		}
+
+	}
+
+	//YJ,add,090107
+	skb_pull(skb, sizeof(rx_desc_819x_usb));
+	//YJ,add,090107,end
+
+	//
+	// Get Total offset of MPDU Frame Body
+	//
+	if((stats->RxBufShift + stats->RxDrvInfoSize) > 0)
+	{
+		stats->bShift = 1;
+		//YJ,add,090107
+		skb_pull(skb, stats->RxBufShift + stats->RxDrvInfoSize);
+		//YJ,add,090107,end
+	}
+
+	//
+	// Get PHY Status and RSVD parts.
+	// <Roger_Notes> It only appears on last aggregated packet.
+	//
+	if (desc->PHYStatus)
+	{
+		rtl8192SU_TranslateRxSignalStuff(skb, stats, desc, driver_info);
+	}
+}
+#else
+void query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats, bool bIsRxAggrSubframe)
+{
+	rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
+	struct net_device *dev=info->dev;
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	//rx_desc_819x_usb *desc = (rx_desc_819x_usb *)skb->data;
+	rx_drvinfo_819x_usb  *driver_info = NULL;
+
+	//
+	//Get Rx Descriptor Information
+	//
+#ifdef USB_RX_AGGREGATION_SUPPORT
+	if (bIsRxAggrSubframe)
+	{
+		rx_desc_819x_usb_aggr_subframe *desc = (rx_desc_819x_usb_aggr_subframe *)skb->data;
+		stats->Length = desc->Length ;
+		stats->RxDrvInfoSize = desc->RxDrvInfoSize;
+		stats->RxBufShift = 0; //RxBufShift = 2 in RxDesc, but usb didn't shift bytes in fact.
+		stats->bICV = desc->ICV;
+		stats->bCRC = desc->CRC32;
+		stats->bHwError = stats->bCRC|stats->bICV;
+		stats->Decrypted = !desc->SWDec;//RTL8190 set this bit to indicate that Hw does not decrypt packet
+	} else
+#endif
+	{
+		rx_desc_819x_usb *desc = (rx_desc_819x_usb *)skb->data;
+
+		stats->Length = desc->Length;
+		stats->RxDrvInfoSize = desc->RxDrvInfoSize;
+		stats->RxBufShift = 0;//desc->Shift&0x03;
+		stats->bICV = desc->ICV;
+		stats->bCRC = desc->CRC32;
+		stats->bHwError = stats->bCRC|stats->bICV;
+		//RTL8190 set this bit to indicate that Hw does not decrypt packet
+		stats->Decrypted = !desc->SWDec;
+	}
+
+	if((priv->ieee80211->pHTInfo->bCurrentHTSupport == true) && (priv->ieee80211->pairwise_key_type == KEY_TYPE_CCMP))
+	{
+		stats->bHwError = false;
+	}
+	else
+	{
+		stats->bHwError = stats->bCRC|stats->bICV;
+	}
+
+	if(stats->Length < 24 || stats->Length > MAX_8192U_RX_SIZE)
+		stats->bHwError |= 1;
+	//
+	//Get Driver Info
+	//
+	// TODO: Need to verify it on FGPA platform
+	//Driver info are written to the RxBuffer following rx desc
+	if (stats->RxDrvInfoSize != 0) {
+		driver_info = (rx_drvinfo_819x_usb *)(skb->data + sizeof(rx_desc_819x_usb) + \
+				stats->RxBufShift);
+		/* unit: 0.5M */
+		/* TODO */
+		if(!stats->bHwError){
+			u8	ret_rate;
+			ret_rate = HwRateToMRate90(driver_info->RxHT, driver_info->RxRate);
+			if(ret_rate == 0xff)
+			{
+				// Abnormal Case: Receive CRC OK packet with Rx descriptor indicating non supported rate.
+				// Special Error Handling here, 2008.05.16, by Emily
+
+				stats->bHwError = 1;
+				stats->rate = MGN_1M;	//Set 1M rate by default
+			}else
+			{
+				stats->rate = ret_rate;
+			}
+		}
+		else
+			stats->rate = 0x02;
+
+		stats->bShortPreamble = driver_info->SPLCP;
+
+
+		UpdateReceivedRateHistogramStatistics8190(dev, stats);
+
+		stats->bIsAMPDU = (driver_info->PartAggr==1);
+		stats->bFirstMPDU = (driver_info->PartAggr==1) && (driver_info->FirstAGGR==1);
+#if 0
+		// TODO: it is debug only. It should be disabled in released driver. 2007.1.12 by Joseph
+		UpdateRxAMPDUHistogramStatistics8190(Adapter, pRfd);
+#endif
+		stats->TimeStampLow = driver_info->TSFL;
+		// xiong mask it, 070514
+		//pRfd->Status.TimeStampHigh = PlatformEFIORead4Byte(Adapter, TSFR+4);
+		// stats->TimeStampHigh = read_nic_dword(dev,  TSFR+4);
+
+		UpdateRxPktTimeStamp8190(dev, stats);
+
+		//
+		// Rx A-MPDU
+		//
+		if(driver_info->FirstAGGR==1 || driver_info->PartAggr == 1)
+			RT_TRACE(COMP_RXDESC, "driver_info->FirstAGGR = %d, driver_info->PartAggr = %d\n",
+					driver_info->FirstAGGR, driver_info->PartAggr);
+
+	}
+
+	skb_pull(skb,sizeof(rx_desc_819x_usb));
+	//
+	// Get Total offset of MPDU Frame Body
+	//
+	if((stats->RxBufShift + stats->RxDrvInfoSize) > 0) {
+		stats->bShift = 1;
+		skb_pull(skb,stats->RxBufShift + stats->RxDrvInfoSize);
+	}
+
+#ifdef USB_RX_AGGREGATION_SUPPORT
+	/* for the rx aggregated sub frame, the redundant space truelly contained in the packet */
+	if(bIsRxAggrSubframe) {
+		skb_pull(skb, 8);
+	}
+#endif
+	/* for debug 2008.5.29 */
+#if 0
+	{
+		int i;
+		printk("\n>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>\n");
+		for(i = 0; i < skb->len; i++) {
+			if(i % 10 == 0) printk("\n");
+			printk("%02x ", skb->data[i]);
+		}
+		printk("\n<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<\n");
+	}
+#endif
+
+	//added by vivi, for MP, 20080108
+	stats->RxIs40MHzPacket = driver_info->BW;
+	if(stats->RxDrvInfoSize != 0)
+		TranslateRxSignalStuff819xUsb(skb, stats, driver_info);
+
+}
+#endif
+
+#ifdef RTL8192SU
+#if 0
+/*-----------------------------------------------------------------------------
+ * Function:	UpdateRxAMPDUHistogramStatistics8192S
+ *
+ * Overview:	Recored down the received A-MPDU aggregation size and pkt number
+ *
+ * Input:       Adapter
+ *
+ * Output:      Adapter
+ *				(Adapter->RxStats.RxAMPDUSizeHistogram[] is updated)
+ *				(Adapter->RxStats.RxAMPDUNumHistogram[] is updated)
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ * When			Who		Remark
+ * 09/18/2008 	MHC		Create Version 0.
+ *
+ *---------------------------------------------------------------------------*/
+static	void
+UpdateRxAMPDUHistogramStatistics8192S(
+	struct net_device *dev,
+	struct ieee80211_rx_stats *stats
+	)
+{
+	//HAL_DATA_TYPE			*pHalData = GET_HAL_DATA(Adapter);
+	u8 	size_index;
+	u8	num_index;
+	u16	update_size = 0;
+	u8	update_num = 0;
+
+	if(stats->bIsAMPDU)
+	{
+		if(stats->bFirstMPDU)
+		{
+			if(stats->nRxAMPDU_Size!=0 && stats->nRxAMPDU_AggrNum!=0)
+			{
+				update_size = stats->nRxAMPDU_Size;
+				update_num = stats->nRxAMPDU_AggrNum;
+			}
+			stats->nRxAMPDU_Size = stats->Length;
+			stats->nRxAMPDU_AggrNum = 1;
+		}
+		else
+		{
+			stats->nRxAMPDU_Size += stats->Length;
+			stats->nRxAMPDU_AggrNum++;
+		}
+	}
+	else
+	{
+		if(stats->nRxAMPDU_Size!=0 && stats->nRxAMPDU_AggrNum!=0)
+		{
+			update_size = stats->nRxAMPDU_Size;
+			update_num = stats->nRxAMPDU_AggrNum;
+		}
+		stats->nRxAMPDU_Size = 0;
+		stats->nRxAMPDU_AggrNum = 0;
+	}
+
+	if(update_size!=0 && update_num!= 0)
+	{
+		if(update_size < 4096)
+			size_index = 0;
+		else if(update_size < 8192)
+			size_index = 1;
+		else if(update_size < 16384)
+			size_index = 2;
+		else if(update_size < 32768)
+			size_index = 3;
+		else if(update_size < 65536)
+			size_index = 4;
+		else
+		{
+			RT_TRACE(COMP_RXDESC,
+			("UpdateRxAMPDUHistogramStatistics8192S(): A-MPDU too large\n");
+		}
+
+		Adapter->RxStats.RxAMPDUSizeHistogram[size_index]++;
+
+		if(update_num < 5)
+			num_index = 0;
+		else if(update_num < 10)
+			num_index = 1;
+		else if(update_num < 20)
+			num_index = 2;
+		else if(update_num < 40)
+			num_index = 3;
+		else
+			num_index = 4;
+
+		Adapter->RxStats.RxAMPDUNumHistogram[num_index]++;
+	}
+}	// UpdateRxAMPDUHistogramStatistics8192S
+#endif
+
+#endif
+
+
+#ifdef RTL8192SU
+//
+// Description:
+// 	The strarting address of wireless lan header will shift 1 or 2 or 3 or "more" bytes for the following reason :
+// 	(1) QoS control : shift 2 bytes
+// 	(2) Mesh Network : shift 1 or 3 bytes
+// 	(3) RxDriverInfo occupies  the front parts of Rx Packets buffer(shift units is in 8Bytes)
+//
+//  	It is because Lextra CPU used by 8186 or 865x series assert exception if the statrting address
+//	of IP header is not double word alignment.
+//	This features is supported in 818xb and 8190 only, but not 818x.
+//
+//	parameter: PRT_RFD, Pointer of Reeceive frame descriptor which is initialized according to
+//					     Rx Descriptor
+//	return value: unsigned int,  number of total shifted bytes
+//
+//	Notes: 2008/06/28, created by Roger
+//
+u32 GetRxPacketShiftBytes8192SU(struct ieee80211_rx_stats  *Status, bool bIsRxAggrSubframe)
+{
+	//PRT_RFD_STATUS	pRtRfdStatus = &pRfd->Status;
+
+	return (sizeof(rx_desc_819x_usb) + Status->RxDrvInfoSize + Status->RxBufShift);
+}
+
+void rtl8192SU_rx_nomal(struct sk_buff* skb)
+{
+	rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
+	struct net_device *dev=info->dev;
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	struct ieee80211_rx_stats stats = {
+		.signal = 0,
+		.noise = -98,
+		.rate = 0,
+		//      .mac_time = jiffies,
+		.freq = IEEE80211_24GHZ_BAND,
+	};
+	u32 rx_pkt_len = 0;
+	struct ieee80211_hdr_1addr *ieee80211_hdr = NULL;
+	bool unicast_packet = false;
+
+#ifdef USB_RX_AGGREGATION_SUPPORT
+	struct sk_buff *agg_skb = NULL;
+	u32  TotalLength = 0;//Total packet length for all aggregated packets.
+	u32  TempDWord = 0;
+	u32  PacketLength = 0;// Per-packet length include size of RxDesc.
+	u32  PacketOccupiedLendth = 0;
+	u8   TempByte = 0;
+	u32  PacketShiftBytes = 0;
+	rx_desc_819x_usb_aggr_subframe *RxDescr = NULL;
+	u8  PaddingBytes = 0;
+	//add just for testing
+	u8   testing;
+
+	u8	TotalAggPkt = 0;
+	PRT_HIGH_THROUGHPUT	pHTInfo =priv-> ieee80211->pHTInfo;
+	u16	RxPageSize = pHTInfo->UsbRxPageSize;
+
+	stats->nTotalAggPkt = 0;
+	//stats->bIsRxAggrSubframe = FALSE;
+
+#endif
+	//printk("**********skb->len = %d\n", skb->len);
+	/* 20 is for ps-poll */
+	if((skb->len >=(20 + sizeof(rx_desc_819x_usb))) && (skb->len < RX_URB_SIZE)) {
+
+		/* first packet should not contain Rx aggregation header */
+		rtl8192SU_query_rxdesc_status(skb, &stats, false);
+		/* TODO */
+
+		/* hardware related info */
+#ifdef USB_RX_AGGREGATION_SUPPORT
+		TotalAggPkt = stats->nTotalAggPkt;
+		PacketLength = stats->Length + GetRxPacketShiftBytes8192SU(&stats, false);
+
+		agg_skb = skb;
+		skb = dev_alloc_skb(PacketLength);
+		memcpy(skb_put(skb,PacketLength),agg_skb->data,PacketLength);
+#endif
+		priv->stats.rxoktotal++;  //YJ,test,090108
+
+		/* Process the MPDU recevied */
+		skb_trim(skb, skb->len - 4/*sCrcLng*/);//FIXLZM
+
+		rx_pkt_len = skb->len;
+		ieee80211_hdr = (struct ieee80211_hdr_1addr *)skb->data;
+		unicast_packet = false;
+		if(is_broadcast_ether_addr(ieee80211_hdr->addr1)) {
+			//TODO
+		}else if(is_multicast_ether_addr(ieee80211_hdr->addr1)){
+			//TODO
+		}else {
+			/* unicast packet */
+			unicast_packet = true;
+		}
+
+		if(!ieee80211_rx(priv->ieee80211,skb, &stats)) {
+			dev_kfree_skb_any(skb);
+		} else {
+		//	priv->stats.rxoktotal++;  //YJ,test,090108
+			if(unicast_packet) {
+				priv->stats.rxbytesunicast += rx_pkt_len;
+			}
+		}
+
+		//up is firs pkt, follow is next and next
+#ifdef USB_RX_AGGREGATION_SUPPORT
+		//
+		// The following operations are for processing Rx aggregated packets.
+		//
+		if(TotalAggPkt>0)
+			TotalAggPkt--;
+
+		while ( TotalAggPkt>0 )
+		{// More aggregated packets need to process.
+
+			u8 tmpCRC = 0, tmpICV = 0;
+
+			//Page size must align to multiple of 128-Bytes.
+			if((PacketLength%RxPageSize) != 0)
+				//PacketLength = ((PacketLength/RxPageSize)+1)*RxPageSize;
+				PacketLength = ((PacketLength>>7)+1)*RxPageSize; // RxPageSize is 128bytes as default.
+
+			// Current total packet occupied length in this buffer.
+			PacketOccupiedLendth += PacketLength;
+
+#if (defined (RTL8192SU_FPGA_2MAC_VERIFICATION)||defined (RTL8192SU_ASIC_VERIFICATION))
+			//if(PacketOccupiedLendth>pContext->BufLenUsed)
+			if(PacketOccupiedLendth>skb->len)
+			{
+				RT_TRACE(COMP_RECV, "(1)HalUsbInMpduComplete8192SUsb(): pRtRfdStatus->Length(%#x)!!\n", stats->Length);
+				RT_TRACE(COMP_RECV, "(1)HalUsbInMpduComplete8192SUsb(): Invalid PacketOccupiedLendth(%#x)!!, BufLenUsed(%#x)\n", PacketOccupiedLendth, stats->BufLenUsed);
+				break;
+			}
+#endif
+
+			skb_pull(agg_skb, PacketLength);
+
+			//
+			// Process the MPDU recevied.
+			//
+			//RT_TRACE(COMP_RECV,"%s:aggred pkt,total_len = %d\n",__FUNCTION__,agg_skb->len);
+			RxDescr = (rx_desc_819x_usb_aggr_subframe *)(agg_skb->data);
+
+#if 0//92SU del
+			tmpCRC = RxDescr->CRC32;
+			tmpICV = RxDescr->ICV;
+			memcpy(agg_skb->data, &agg_skb->data[44], 2);
+			RxDescr->CRC32 = tmpCRC;
+			RxDescr->ICV = tmpICV;
+#endif
+			memset(&stats, 0, sizeof(struct ieee80211_rx_stats));
+			stats.signal = 0;
+			stats.noise = -98;
+			stats.rate = 0;
+			stats.freq = IEEE80211_24GHZ_BAND;
+
+			rtl8192SU_query_rxdesc_status(agg_skb, &stats, true);
+			//PacketLength = stats.Length;
+			PacketLength = stats.Length +  GetRxPacketShiftBytes8192SU(&stats, true);
+
+#if (defined (RTL8192SU_FPGA_2MAC_VERIFICATION)||defined (RTL8192SU_ASIC_VERIFICATION))
+			if((PacketOccupiedLendth+PacketLength)>skb->len)
+			{
+				RT_TRACE(COMP_RECV, "(2)HalUsbInMpduComplete8192SUsb(): Invalid PacketOccupiedLendth(%#x)+PacketLength(%#x)!!, BufLenUsed(%#x)\n",
+					PacketOccupiedLendth, PacketLength, pContext->BufLenUsed);
+				break;
+			}
+#endif
+
+			if(PacketLength > agg_skb->len) {
+				break;
+			}
+
+			/* Process the MPDU recevied */
+			skb = dev_alloc_skb(PacketLength);
+			memcpy(skb_put(skb,PacketLength),agg_skb->data, PacketLength);
+			skb_trim(skb, skb->len - 4/*sCrcLng*/);
+
+			rx_pkt_len = skb->len;
+			ieee80211_hdr = (struct ieee80211_hdr_1addr *)skb->data;
+			unicast_packet = false;
+			if(is_broadcast_ether_addr(ieee80211_hdr->addr1)) {
+				//TODO
+			}else if(is_multicast_ether_addr(ieee80211_hdr->addr1)){
+				//TODO
+			}else {
+				/* unicast packet */
+				unicast_packet = true;
+			}
+			if(!ieee80211_rx(priv->ieee80211,skb, &stats)) {
+				dev_kfree_skb_any(skb);
+			} else {
+				priv->stats.rxoktotal++;
+				if(unicast_packet) {
+					priv->stats.rxbytesunicast += rx_pkt_len;
+				}
+			}
+
+			TotalAggPkt--;
+
+			skb_pull(agg_skb, TempDWord);
+		}
+
+		dev_kfree_skb(agg_skb);
+#endif
+	}
+	else
+	{
+		priv->stats.rxurberr++;
+		printk("actual_length:%d\n", skb->len);
+		dev_kfree_skb_any(skb);
+	}
+
+}
+#else
+u32 GetRxPacketShiftBytes819xUsb(struct ieee80211_rx_stats  *Status, bool bIsRxAggrSubframe)
+{
+#ifdef USB_RX_AGGREGATION_SUPPORT
+	if (bIsRxAggrSubframe)
+		return (sizeof(rx_desc_819x_usb) + Status->RxDrvInfoSize
+			+ Status->RxBufShift + 8);
+	else
+#endif
+		return (sizeof(rx_desc_819x_usb) + Status->RxDrvInfoSize
+				+ Status->RxBufShift);
+}
+
+void rtl8192_rx_nomal(struct sk_buff* skb)
+{
+	rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
+	struct net_device *dev=info->dev;
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	struct ieee80211_rx_stats stats = {
+		.signal = 0,
+		.noise = -98,
+		.rate = 0,
+		//      .mac_time = jiffies,
+		.freq = IEEE80211_24GHZ_BAND,
+	};
+	u32 rx_pkt_len = 0;
+	struct ieee80211_hdr_1addr *ieee80211_hdr = NULL;
+	bool unicast_packet = false;
+#ifdef USB_RX_AGGREGATION_SUPPORT
+	struct sk_buff *agg_skb = NULL;
+	u32  TotalLength = 0;
+	u32  TempDWord = 0;
+	u32  PacketLength = 0;
+	u32  PacketOccupiedLendth = 0;
+	u8   TempByte = 0;
+	u32  PacketShiftBytes = 0;
+	rx_desc_819x_usb_aggr_subframe *RxDescr = NULL;
+	u8  PaddingBytes = 0;
+	//add just for testing
+	u8   testing;
+
+#endif
+
+	/* 20 is for ps-poll */
+	if((skb->len >=(20 + sizeof(rx_desc_819x_usb))) && (skb->len < RX_URB_SIZE)) {
+#ifdef USB_RX_AGGREGATION_SUPPORT
+		TempByte = *(skb->data + sizeof(rx_desc_819x_usb));
+#endif
+		/* first packet should not contain Rx aggregation header */
+		query_rxdesc_status(skb, &stats, false);
+		/* TODO */
+		/* hardware related info */
+#ifdef USB_RX_AGGREGATION_SUPPORT
+		if (TempByte & BIT0) {
+			agg_skb = skb;
+			//TotalLength = agg_skb->len - 4; /*sCrcLng*/
+			TotalLength = stats.Length - 4; /*sCrcLng*/
+			//RT_TRACE(COMP_RECV, "%s:first aggregated packet!Length=%d\n",__FUNCTION__,TotalLength);
+			/* though the head pointer has passed this position  */
+			TempDWord = *(u32 *)(agg_skb->data - 4);
+			PacketLength = (u16)(TempDWord & 0x3FFF); /*sCrcLng*/
+			skb = dev_alloc_skb(PacketLength);
+			memcpy(skb_put(skb,PacketLength),agg_skb->data,PacketLength);
+			PacketShiftBytes = GetRxPacketShiftBytes819xUsb(&stats, false);
+		}
+#endif
+		/* Process the MPDU recevied */
+		skb_trim(skb, skb->len - 4/*sCrcLng*/);
+
+		rx_pkt_len = skb->len;
+		ieee80211_hdr = (struct ieee80211_hdr_1addr *)skb->data;
+		unicast_packet = false;
+		if(is_broadcast_ether_addr(ieee80211_hdr->addr1)) {
+			//TODO
+		}else if(is_multicast_ether_addr(ieee80211_hdr->addr1)){
+			//TODO
+		}else {
+			/* unicast packet */
+			unicast_packet = true;
+		}
+
+		if(!ieee80211_rx(priv->ieee80211,skb, &stats)) {
+			dev_kfree_skb_any(skb);
+		} else {
+			priv->stats.rxoktotal++;
+			if(unicast_packet) {
+				priv->stats.rxbytesunicast += rx_pkt_len;
+			}
+		}
+#ifdef USB_RX_AGGREGATION_SUPPORT
+		testing = 1;
+		// (PipeIndex == 0) && (TempByte & BIT0) => TotalLength > 0.
+		if (TotalLength > 0) {
+			PacketOccupiedLendth = PacketLength + (PacketShiftBytes + 8);
+			if ((PacketOccupiedLendth & 0xFF) != 0)
+				PacketOccupiedLendth = (PacketOccupiedLendth & 0xFFFFFF00) + 256;
+			PacketOccupiedLendth -= 8;
+			TempDWord = PacketOccupiedLendth - PacketShiftBytes; /*- PacketLength */
+			if (agg_skb->len > TempDWord)
+				skb_pull(agg_skb, TempDWord);
+			else
+				agg_skb->len = 0;
+
+			while (agg_skb->len>=GetRxPacketShiftBytes819xUsb(&stats, true)) {
+				u8 tmpCRC = 0, tmpICV = 0;
+				//RT_TRACE(COMP_RECV,"%s:aggred pkt,total_len = %d\n",__FUNCTION__,agg_skb->len);
+				RxDescr = (rx_desc_819x_usb_aggr_subframe *)(agg_skb->data);
+				tmpCRC = RxDescr->CRC32;
+				tmpICV = RxDescr->ICV;
+				memcpy(agg_skb->data, &agg_skb->data[44], 2);
+				RxDescr->CRC32 = tmpCRC;
+				RxDescr->ICV = tmpICV;
+
+				memset(&stats, 0, sizeof(struct ieee80211_rx_stats));
+				stats.signal = 0;
+				stats.noise = -98;
+				stats.rate = 0;
+				stats.freq = IEEE80211_24GHZ_BAND;
+				query_rxdesc_status(agg_skb, &stats, true);
+				PacketLength = stats.Length;
+
+				if(PacketLength > agg_skb->len) {
+					break;
+				}
+				/* Process the MPDU recevied */
+				skb = dev_alloc_skb(PacketLength);
+				memcpy(skb_put(skb,PacketLength),agg_skb->data, PacketLength);
+				skb_trim(skb, skb->len - 4/*sCrcLng*/);
+
+				rx_pkt_len = skb->len;
+				ieee80211_hdr = (struct ieee80211_hdr_1addr *)skb->data;
+				unicast_packet = false;
+				if(is_broadcast_ether_addr(ieee80211_hdr->addr1)) {
+					//TODO
+				}else if(is_multicast_ether_addr(ieee80211_hdr->addr1)){
+					//TODO
+				}else {
+					/* unicast packet */
+					unicast_packet = true;
+				}
+				if(!ieee80211_rx(priv->ieee80211,skb, &stats)) {
+					dev_kfree_skb_any(skb);
+				} else {
+					priv->stats.rxoktotal++;
+					if(unicast_packet) {
+						priv->stats.rxbytesunicast += rx_pkt_len;
+					}
+				}
+				/* should trim the packet which has been copied to target skb */
+				skb_pull(agg_skb, PacketLength);
+				PacketShiftBytes = GetRxPacketShiftBytes819xUsb(&stats, true);
+				PacketOccupiedLendth = PacketLength + PacketShiftBytes;
+				if ((PacketOccupiedLendth & 0xFF) != 0) {
+					PaddingBytes = 256 - (PacketOccupiedLendth & 0xFF);
+					if (agg_skb->len > PaddingBytes)
+						skb_pull(agg_skb, PaddingBytes);
+					else
+						agg_skb->len = 0;
+				}
+			}
+			dev_kfree_skb(agg_skb);
+		}
+#endif
+	} else {
+		priv->stats.rxurberr++;
+		printk("actual_length:%d\n", skb->len);
+		dev_kfree_skb_any(skb);
+	}
+
+}
+
+#endif
+
+void
+rtl819xusb_process_received_packet(
+	struct net_device *dev,
+	struct ieee80211_rx_stats *pstats
+	)
+{
+//	bool bfreerfd=false, bqueued=false;
+	u8* 	frame;
+	u16     frame_len=0;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+//	u8			index = 0;
+//	u8			TID = 0;
+	//u16			seqnum = 0;
+	//PRX_TS_RECORD	pts = NULL;
+
+	// Get shifted bytes of Starting address of 802.11 header. 2006.09.28, by Emily
+	//porting by amy 080508
+	pstats->virtual_address += get_rxpacket_shiftbytes_819xusb(pstats);
+	frame = pstats->virtual_address;
+	frame_len = pstats->packetlength;
+#ifdef TODO	// by amy about HCT
+	if(!Adapter->bInHctTest)
+		CountRxErrStatistics(Adapter, pRfd);
+#endif
+	{
+	#ifdef ENABLE_PS  //by amy for adding ps function in future
+		RT_RF_POWER_STATE rtState;
+		// When RF is off, we should not count the packet for hw/sw synchronize
+		// reason, ie. there may be a duration while sw switch is changed and hw
+		// switch is being changed. 2006.12.04, by shien chang.
+		Adapter->HalFunc.GetHwRegHandler(Adapter, HW_VAR_RF_STATE, (u8* )(&rtState));
+		if (rtState == eRfOff)
+		{
+			return;
+		}
+	#endif
+	priv->stats.rxframgment++;
+
+	}
+#ifdef TODO
+	RmMonitorSignalStrength(Adapter, pRfd);
+#endif
+	/* 2007/01/16 MH Add RX command packet handle here. */
+	/* 2007/03/01 MH We have to release RFD and return if rx pkt is cmd pkt. */
+	if (rtl819xusb_rx_command_packet(dev, pstats))
+	{
+		return;
+	}
+
+#ifdef SW_CRC_CHECK
+	SwCrcCheck();
+#endif
+
+
+}
+
+void query_rx_cmdpkt_desc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats)
+{
+//	rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
+//	struct net_device *dev=info->dev;
+//	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	rx_desc_819x_usb *desc = (rx_desc_819x_usb *)skb->data;
+//	rx_drvinfo_819x_usb  *driver_info;
+
+	//
+	//Get Rx Descriptor Information
+	//
+	stats->virtual_address = (u8*)skb->data;
+	stats->Length = desc->Length;
+	stats->RxDrvInfoSize = 0;
+	stats->RxBufShift = 0;
+	stats->packetlength = stats->Length-scrclng;
+	stats->fraglength = stats->packetlength;
+	stats->fragoffset = 0;
+	stats->ntotalfrag = 1;
+}
+
+#ifdef RTL8192SU
+void rtl8192SU_rx_cmd(struct sk_buff *skb)
+{
+	struct rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
+	struct net_device *dev = info->dev;
+
+	/* TODO */
+	struct ieee80211_rx_stats stats = {
+		.signal = 0,
+		.noise = -98,
+		.rate = 0,
+		//      .mac_time = jiffies,
+		.freq = IEEE80211_24GHZ_BAND,
+	};
+
+	//
+	// Check buffer length to determine if this is a valid MPDU.
+	//
+	if( (skb->len >= sizeof(rx_desc_819x_usb)) && (skb->len <= RX_URB_SIZE) )//&&
+		//(pHalData->SwChnlInProgress == FALSE))
+	{
+		//
+		// Collection information in Rx descriptor.
+		//
+#if 0
+		pRxDesc = pContext->Buffer;
+
+		pRfd->Buffer.VirtualAddress = pContext->Buffer; // 061109, rcnjko, for multi-platform consideration..
+
+		pRtRfdStatus->Length = (u2Byte)GET_RX_DESC_PKT_LEN(pRxDesc);
+		pRtRfdStatus->RxDrvInfoSize = 0;
+		pRtRfdStatus->RxBufShift = 0;
+
+		pRfd->PacketLength	= pRfd->Status.Length - sCrcLng;
+		pRfd->FragLength	= pRfd->PacketLength;
+		pRfd->FragOffset	= 0;
+		pRfd->nTotalFrag	= 1;
+		pRfd->queue_id = PipeIndex;
+#endif
+		query_rx_cmdpkt_desc_status(skb,&stats);
+		// this is to be done by amy 080508     prfd->queue_id = 1;
+
+		//
+		// Process the MPDU recevied.
+		//
+		rtl819xusb_process_received_packet(dev,&stats);
+
+		dev_kfree_skb_any(skb);
+	}
+	else
+	{
+		//RTInsertTailListWithCnt(&pAdapter->RfdIdleQueue, &pRfd->List, &pAdapter->NumIdleRfd);
+		//RT_ASSERT(pAdapter->NumIdleRfd <= pAdapter->NumRfd, ("HalUsbInCommandComplete8192SUsb(): Adapter->NumIdleRfd(%d)\n", pAdapter->NumIdleRfd));
+		//RT_TRACE(COMP_RECV, DBG_LOUD, ("HalUsbInCommandComplete8192SUsb(): NOT enough Resources!! BufLenUsed(%d), NumIdleRfd(%d)\n",
+			//pContext->BufLenUsed, pAdapter->NumIdleRfd));
+	}
+
+	//
+	// Reuse USB_IN_CONTEXT since we had finished processing the
+	// buffer in USB_IN_CONTEXT.
+	//
+	//HalUsbReturnInContext(pAdapter, pContext);
+
+	//
+	// Issue another bulk IN transfer.
+	//
+	//HalUsbInMpdu(pAdapter, PipeIndex);
+
+	RT_TRACE(COMP_RECV, "<--- HalUsbInCommandComplete8192SUsb()\n");
+
+}
+#else
+void rtl8192_rx_cmd(struct sk_buff *skb)
+{
+	struct rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
+	struct net_device *dev = info->dev;
+	//int ret;
+//	struct urb *rx_urb = info->urb;
+	/* TODO */
+	struct ieee80211_rx_stats stats = {
+		.signal = 0,
+		.noise = -98,
+		.rate = 0,
+		//      .mac_time = jiffies,
+		.freq = IEEE80211_24GHZ_BAND,
+	};
+
+	if((skb->len >=(20 + sizeof(rx_desc_819x_usb))) && (skb->len < RX_URB_SIZE))
+	{
+
+		query_rx_cmdpkt_desc_status(skb,&stats);
+		// this is to be done by amy 080508     prfd->queue_id = 1;
+
+
+		//
+		//  Process the command packet received.
+		//
+
+		rtl819xusb_process_received_packet(dev,&stats);
+
+		dev_kfree_skb_any(skb);
+	}
+	else
+		;
+
+
+#if 0
+	desc = (u32*)(skb->data);
+	cmd = (desc[0] >> 30) & 0x03;
+
+	if(cmd == 0x00) {//beacon interrupt
+		//send beacon packet
+		skb = ieee80211_get_beacon(priv->ieee80211);
+
+		if(!skb){
+			DMESG("not enought memory for allocating beacon");
+			return;
+		}
+		skb->cb[0] = BEACON_PRIORITY;
+		skb->cb[1] = 0;
+		skb->cb[2] = ieeerate2rtlrate(priv->ieee80211->basic_rate);
+		ret = rtl8192_tx(dev, skb);
+
+		if( ret != 0 ){
+			printk(KERN_ALERT "tx beacon packet error : %d !\n", ret);
+		}
+		dev_kfree_skb_any(skb);
+	} else {//0x00
+		//{ log the device information
+		// At present, It is not implemented just now.
+		//}
+	}
+#endif
+}
+#endif
+
+void rtl8192_irq_rx_tasklet(struct r8192_priv *priv)
+{
+        struct sk_buff *skb;
+	struct rtl8192_rx_info *info;
+
+        while (NULL != (skb = skb_dequeue(&priv->skb_queue))) {
+		info = (struct rtl8192_rx_info *)skb->cb;
+                switch (info->out_pipe) {
+		/* Nomal packet pipe */
+			case 3:
+				//RT_TRACE(COMP_RECV, "normal in-pipe index(%d)\n",info->out_pipe);
+				priv->IrpPendingCount--;
+				priv->ops->rtl819x_rx_nomal(skb);
+				break;
+
+				/* Command packet pipe */
+			case 9:
+				RT_TRACE(COMP_RECV, "command in-pipe index(%d)\n",\
+						info->out_pipe);
+				priv->ops->rtl819x_rx_cmd(skb);
+				break;
+
+			default: /* should never get here! */
+				RT_TRACE(COMP_ERR, "Unknown in-pipe index(%d)\n",\
+						info->out_pipe);
+				dev_kfree_skb(skb);
+				break;
+
+		}
+        }
+}
+
+
+
+/****************************************************************************
+     ---------------------------- USB_STUFF---------------------------
+*****************************************************************************/
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+//LZM Merge from windows HalUsbSetQueuePipeMapping8192SUsb 090319
+static void HalUsbSetQueuePipeMapping8192SUsb(struct usb_interface *intf, struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	struct usb_host_interface *iface_desc;
+	struct usb_endpoint_descriptor *endpoint;
+	u8 i = 0;
+
+	priv->ep_in_num = 0;
+	priv->ep_out_num = 0;
+	memset(priv->RtOutPipes,0,16);
+	memset(priv->RtInPipes,0,16);
+
+#ifndef USE_ONE_PIPE
+	iface_desc = intf->cur_altsetting;
+	priv->ep_num = iface_desc->desc.bNumEndpoints;
+
+	for (i = 0; i < priv->ep_num; ++i) {
+		endpoint = &iface_desc->endpoint[i].desc;
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,23)
+		if (usb_endpoint_is_bulk_in(endpoint)) {
+			priv->RtInPipes[priv->ep_in_num] = usb_endpoint_num(endpoint);
+			priv->ep_in_num ++;
+			//printk("in_endpoint_idx = %d\n", usb_endpoint_num(endpoint));
+		} else if (usb_endpoint_is_bulk_out(endpoint)) {
+			priv->RtOutPipes[priv->ep_out_num] = usb_endpoint_num(endpoint);
+			priv->ep_out_num ++;
+			//printk("out_endpoint_idx = %d\n", usb_endpoint_num(endpoint));
+		}
+#else
+		if ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) &&
+		     ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK)) {
+			/* we found a bulk in endpoint */
+			priv->RtInPipes[priv->ep_in_num] = (endpoint->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+			priv->ep_in_num ++;
+		} else if (((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) &&
+		     ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK)) {
+			/* We found bulk out endpoint */
+			priv->RtOutPipes[priv->ep_out_num] = endpoint->bEndpointAddress;
+			priv->ep_out_num ++;
+			}
+#endif
+	}
+	{
+		memset(priv->txqueue_to_outpipemap,0,9);
+		if (priv->ep_num == 6) {
+			// BK, BE, VI, VO, HCCA, TXCMD, MGNT, HIGH, BEACON
+			u8 queuetopipe[] = {3, 2, 1, 0, 4, 4, 4, 4, 4};
+
+			memcpy(priv->txqueue_to_outpipemap,queuetopipe,9);
+		} else if (priv->ep_num == 4) {
+			// BK, BE, VI, VO, HCCA, TXCMD, MGNT, HIGH, BEACON
+			u8 queuetopipe[] = {1, 1, 0, 0, 2, 2, 2, 2, 2};
+
+			memcpy(priv->txqueue_to_outpipemap,queuetopipe,9);
+		} else if (priv->ep_num > 9) {
+			// BK, BE, VI, VO, HCCA, TXCMD, MGNT, HIGH, BEACON
+			u8 queuetopipe[] = {3, 2, 1, 0, 4, 8, 7, 6, 5};
+
+			memcpy(priv->txqueue_to_outpipemap,queuetopipe,9);
+		} else {//use sigle pipe
+			// BK, BE, VI, VO, HCCA, TXCMD, MGNT, HIGH, BEACON
+			u8 queuetopipe[] = {0, 0, 0, 0, 0, 0, 0, 0, 0};
+			memcpy(priv->txqueue_to_outpipemap,queuetopipe,9);
+		}
+	}
+	printk("==>ep_num:%d, in_ep_num:%d, out_ep_num:%d\n", priv->ep_num, priv->ep_in_num, priv->ep_out_num);
+
+	printk("==>RtInPipes:");
+	for(i=0; i < priv->ep_in_num; i++)
+		printk("%d  ", priv->RtInPipes[i]);
+	printk("\n");
+
+	printk("==>RtOutPipes:");
+	for(i=0; i < priv->ep_out_num; i++)
+		printk("%d  ", priv->RtOutPipes[i]);
+	printk("\n");
+
+	printk("==>txqueue_to_outpipemap for BK, BE, VI, VO, HCCA, TXCMD, MGNT, HIGH, BEACON:\n");
+	for(i=0; i < 9; i++)
+		printk("%d  ", priv->txqueue_to_outpipemap[i]);
+	printk("\n");
+#else
+	{
+		memset(priv->txqueue_to_outpipemap,0,9);
+		memset(priv->RtOutPipes,4,16);//all use endpoint 4 for out
+	}
+#endif
+
+	return;
+}
+#endif
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+static int __devinit rtl8192_usb_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+#else
+static void * __devinit rtl8192_usb_probe(struct usb_device *udev,
+			                unsigned int ifnum,
+			          const struct usb_device_id *id)
+#endif
+{
+//	unsigned long ioaddr = 0;
+	struct net_device *dev = NULL;
+	struct r8192_priv *priv= NULL;
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	struct usb_device *udev = interface_to_usbdev(intf);
+#endif
+        RT_TRACE(COMP_INIT, "Oops: i'm coming\n");
+
+	dev = alloc_ieee80211(sizeof(struct r8192_priv));
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)
+	SET_MODULE_OWNER(dev);
+#endif
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	usb_set_intfdata(intf, dev);
+	SET_NETDEV_DEV(dev, &intf->dev);
+#endif
+	priv = ieee80211_priv(dev);
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	priv->ieee80211 = netdev_priv(dev);
+#else
+	priv->ieee80211 = (struct net_device *)dev->priv;
+#endif
+	priv->udev=udev;
+
+#ifdef RTL8192SU
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	HalUsbSetQueuePipeMapping8192SUsb(intf, dev);
+#else//use one pipe
+	{
+		memset(priv->txqueue_to_outpipemap,0,9);
+		memset(priv->RtOutPipes,4,16);//all use endpoint 4 for out
+	}
+#endif
+#endif
+
+#ifdef RTL8192SU
+	//printk("===============>NIC 8192SU\n");
+	priv->ops = &rtl8192su_ops;
+#else
+	//printk("===============>NIC 8192U\n");
+	priv->ops = &rtl8192u_ops;
+#endif
+
+	dev->open = rtl8192_open;
+	dev->stop = rtl8192_close;
+	//dev->hard_start_xmit = rtl8192_8023_hard_start_xmit;
+	dev->tx_timeout = tx_timeout;
+	//dev->wireless_handlers = &r8192_wx_handlers_def;
+	dev->do_ioctl = rtl8192_ioctl;
+	dev->set_multicast_list = r8192_set_multicast;
+	dev->set_mac_address = r8192_set_mac_adr;
+	dev->get_stats = rtl8192_stats;
+
+         //DMESG("Oops: i'm coming\n");
+#if WIRELESS_EXT >= 12
+#if WIRELESS_EXT < 17
+        dev->get_wireless_stats = r8192_get_wireless_stats;
+#endif
+        dev->wireless_handlers = (struct iw_handler_def *) &r8192_wx_handlers_def;
+#endif
+	dev->type=ARPHRD_ETHER;
+
+	dev->watchdog_timeo = HZ*3;	//modified by john, 0805
+
+	if (dev_alloc_name(dev, ifname) < 0){
+                RT_TRACE(COMP_INIT, "Oops: devname already taken! Trying wlan%%d...\n");
+		ifname = "wlan%d";
+		dev_alloc_name(dev, ifname);
+        }
+
+	RT_TRACE(COMP_INIT, "Driver probe completed1\n");
+#if 1
+	if(rtl8192_init(dev)!=0){
+		RT_TRACE(COMP_ERR, "Initialization failed");
+		goto fail;
+	}
+#endif
+	netif_carrier_off(dev);
+	netif_stop_queue(dev);
+
+	register_netdev(dev);
+	RT_TRACE(COMP_INIT, "dev name=======> %s\n",dev->name);
+	rtl8192_proc_init_one(dev);
+
+
+	RT_TRACE(COMP_INIT, "Driver probe completed\n");
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+	return dev;
+#else
+	return 0;
+#endif
+
+
+fail:
+	free_ieee80211(dev);
+
+	RT_TRACE(COMP_ERR, "wlan driver load failed\n");
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+	return NULL;
+#else
+	return -ENODEV;
+#endif
+
+}
+
+//detach all the work and timer structure declared or inititialize in r8192U_init function.
+void rtl8192_cancel_deferred_work(struct r8192_priv* priv)
+{
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,22)
+	cancel_work_sync(&priv->reset_wq);
+	cancel_work_sync(&priv->qos_activate);
+	cancel_delayed_work(&priv->watch_dog_wq);
+	cancel_delayed_work(&priv->update_beacon_wq);
+	cancel_delayed_work(&priv->ieee80211->hw_wakeup_wq);
+	cancel_delayed_work(&priv->ieee80211->hw_sleep_wq);
+	//cancel_work_sync(&priv->SetBWModeWorkItem);
+	//cancel_work_sync(&priv->SwChnlWorkItem);
+#else
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	cancel_delayed_work(&priv->reset_wq);
+	cancel_delayed_work(&priv->qos_activate);
+	cancel_delayed_work(&priv->watch_dog_wq);
+	cancel_delayed_work(&priv->update_beacon_wq);
+	cancel_delayed_work(&priv->ieee80211->hw_wakeup_wq);
+	cancel_delayed_work(&priv->ieee80211->hw_sleep_wq);
+
+	//cancel_delayed_work(&priv->SetBWModeWorkItem);
+	//cancel_delayed_work(&priv->SwChnlWorkItem);
+#endif
+#endif
+
+}
+
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+static void __devexit rtl8192_usb_disconnect(struct usb_interface *intf)
+#else
+static void __devexit rtl8192_usb_disconnect(struct usb_device *udev, void *ptr)
+#endif
+{
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	struct net_device *dev = usb_get_intfdata(intf);
+#else
+	struct net_device *dev = (struct net_device *)ptr;
+#endif
+
+	struct r8192_priv *priv = ieee80211_priv(dev);
+ 	if(dev){
+
+		unregister_netdev(dev);
+
+		RT_TRACE(COMP_DOWN, "=============>wlan driver to be removed\n");
+		rtl8192_proc_remove_one(dev);
+
+			rtl8192_down(dev);
+		if (priv->pFirmware)
+		{
+			vfree(priv->pFirmware);
+			priv->pFirmware = NULL;
+		}
+	//	priv->rf_close(dev);
+//		rtl8192_SetRFPowerState(dev, eRfOff);
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+		destroy_workqueue(priv->priv_wq);
+#endif
+		//rtl8192_irq_disable(dev);
+		//rtl8192_reset(dev);
+		mdelay(10);
+
+	}
+	free_ieee80211(dev);
+	RT_TRACE(COMP_DOWN, "wlan driver removed\n");
+}
+
+static int __init rtl8192_usb_module_init(void)
+{
+	printk(KERN_INFO "\nLinux kernel driver for RTL8192 based WLAN cards\n");
+	printk(KERN_INFO "Copyright (c) 2007-2008, Realsil Wlan\n");
+	RT_TRACE(COMP_INIT, "Initializing module");
+	RT_TRACE(COMP_INIT, "Wireless extensions version %d", WIRELESS_EXT);
+	rtl8192_proc_module_init();
+	return usb_register(&rtl8192_usb_driver);
+}
+
+
+static void __exit rtl8192_usb_module_exit(void)
+{
+	usb_deregister(&rtl8192_usb_driver);
+
+	RT_TRACE(COMP_DOWN, "Exiting");
+	rtl8192_proc_module_remove();
+}
+
+
+void rtl8192_try_wake_queue(struct net_device *dev, int pri)
+{
+	unsigned long flags;
+	short enough_desc;
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+
+	spin_lock_irqsave(&priv->tx_lock,flags);
+	enough_desc = check_nic_enough_desc(dev,pri);
+        spin_unlock_irqrestore(&priv->tx_lock,flags);
+
+	if(enough_desc)
+		ieee80211_wake_queue(priv->ieee80211);
+}
+
+#if 0
+void DisableHWSecurityConfig8192SUsb(struct net_device *dev)
+{
+	u8 SECR_value = 0x0;
+	write_nic_byte(dev, SECR,  SECR_value);//SECR_value |  SCR_UseDK );
+}
+#endif
+
+void EnableHWSecurityConfig8192(struct net_device *dev)
+{
+        u8 SECR_value = 0x0;
+	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+	 struct ieee80211_device* ieee = priv->ieee80211;
+
+	SECR_value = SCR_TxEncEnable | SCR_RxDecEnable;
+#if 1
+	if (((KEY_TYPE_WEP40 == ieee->pairwise_key_type) || (KEY_TYPE_WEP104 == ieee->pairwise_key_type)) && (priv->ieee80211->auth_mode != 2))
+	{
+		SECR_value |= SCR_RxUseDK;
+		SECR_value |= SCR_TxUseDK;
+	}
+	else if ((ieee->iw_mode == IW_MODE_ADHOC) && (ieee->pairwise_key_type & (KEY_TYPE_CCMP | KEY_TYPE_TKIP)))
+	{
+		SECR_value |= SCR_RxUseDK;
+		SECR_value |= SCR_TxUseDK;
+	}
+#endif
+        //add HWSec active enable here.
+//default using hwsec. when peer AP is in N mode only and pairwise_key_type is none_aes(which HT_IOT_ACT_PURE_N_MODE indicates it), use software security. when peer AP is in b,g,n mode mixed and pairwise_key_type is none_aes, use g mode hw security. WB on 2008.7.4
+
+	ieee->hwsec_active = 1;
+
+	if ((ieee->pHTInfo->IOTAction&HT_IOT_ACT_PURE_N_MODE) || !hwwep)//!ieee->hwsec_support) //add hwsec_support flag to totol control hw_sec on/off
+	{
+		ieee->hwsec_active = 0;
+		SECR_value &= ~SCR_RxDecEnable;
+	}
+
+	RT_TRACE(COMP_SEC,"%s:, hwsec:%d, pairwise_key:%d, SECR_value:%x\n", __FUNCTION__, \
+			ieee->hwsec_active, ieee->pairwise_key_type, SECR_value);
+	{
+                write_nic_byte(dev, SECR,  SECR_value);//SECR_value |  SCR_UseDK );
+        }
+}
+
+
+void setKey(	struct net_device *dev,
+		u8 EntryNo,
+		u8 KeyIndex,
+		u16 KeyType,
+		u8 *MacAddr,
+		u8 DefaultKey,
+		u32 *KeyContent )
+{
+	u32 TargetCommand = 0;
+	u32 TargetContent = 0;
+	u16 usConfig = 0;
+	u8 i;
+	if (EntryNo >= TOTAL_CAM_ENTRY)
+		RT_TRACE(COMP_ERR, "cam entry exceeds in setKey()\n");
+
+	RT_TRACE(COMP_SEC, "====>to setKey(), dev:%p, EntryNo:%d, KeyIndex:%d, KeyType:%d, MacAddr"MAC_FMT"\n", dev,EntryNo, KeyIndex, KeyType, MAC_ARG(MacAddr));
+
+	if (DefaultKey)
+		usConfig |= BIT15 | (KeyType<<2);
+	else
+		usConfig |= BIT15 | (KeyType<<2) | KeyIndex;
+//	usConfig |= BIT15 | (KeyType<<2) | (DefaultKey<<5) | KeyIndex;
+
+
+	for(i=0 ; i<CAM_CONTENT_COUNT; i++){
+		TargetCommand  = i+CAM_CONTENT_COUNT*EntryNo;
+		TargetCommand |= BIT31|BIT16;
+
+		if(i==0){//MAC|Config
+			TargetContent = (u32)(*(MacAddr+0)) << 16|
+					(u32)(*(MacAddr+1)) << 24|
+					(u32)usConfig;
+
+			write_nic_dword(dev, WCAMI, TargetContent);
+			write_nic_dword(dev, RWCAM, TargetCommand);
+	//		printk("setkey cam =%8x\n", read_cam(dev, i+6*EntryNo));
+		}
+		else if(i==1){//MAC
+                        TargetContent = (u32)(*(MacAddr+2)) 	 |
+                                        (u32)(*(MacAddr+3)) <<  8|
+                                        (u32)(*(MacAddr+4)) << 16|
+                                        (u32)(*(MacAddr+5)) << 24;
+			write_nic_dword(dev, WCAMI, TargetContent);
+			write_nic_dword(dev, RWCAM, TargetCommand);
+		}
+		else {
+			//Key Material
+			if(KeyContent !=NULL){
+			write_nic_dword(dev, WCAMI, (u32)(*(KeyContent+i-2)) );
+			write_nic_dword(dev, RWCAM, TargetCommand);
+		}
+	}
+	}
+
+}
+
+/***************************************************************************
+     ------------------- module init / exit stubs ----------------
+****************************************************************************/
+module_init(rtl8192_usb_module_init);
+module_exit(rtl8192_usb_module_exit);
diff --git a/drivers/staging/rtl8192su/r8192U_dm.c b/drivers/staging/rtl8192su/r8192U_dm.c
new file mode 100644
index 00000000000..304274b886e
--- /dev/null
+++ b/drivers/staging/rtl8192su/r8192U_dm.c
@@ -0,0 +1,4521 @@
+/*++
+Copyright-c Realtek Semiconductor Corp. All rights reserved.
+
+Module Name:
+	r8192U_dm.c
+
+Abstract:
+	HW dynamic mechanism.
+
+Major Change History:
+	When      	Who				What
+	----------	--------------- -------------------------------
+	2008-05-14	amy                     create version 0 porting from windows code.
+
+--*/
+
+
+#ifdef RTL8192SU
+#include "r8192U.h"
+#include "r8192U_dm.h"
+//#include "r8190_rtl8256.h"
+#include "r819xU_cmdpkt.h"
+#include "r8192S_hw.h"
+#include "r8192S_phy.h"
+#include "r8192S_phyreg.h"
+#else
+#include "r8192U.h"
+#include "r8192U_dm.h"
+#include "r8192U_hw.h"
+#include "r819xU_phy.h"
+#include "r819xU_phyreg.h"
+#include "r8190_rtl8256.h"
+#include "r819xU_cmdpkt.h"
+#endif
+
+/*---------------------------Define Local Constant---------------------------*/
+//
+// Indicate different AP vendor for IOT issue.
+//
+#if 0
+typedef enum _HT_IOT_PEER
+{
+	HT_IOT_PEER_UNKNOWN = 0,
+	HT_IOT_PEER_REALTEK = 1,
+	HT_IOT_PEER_BROADCOM = 2,
+	HT_IOT_PEER_RALINK = 3,
+	HT_IOT_PEER_ATHEROS = 4,
+	HT_IOT_PEER_CISCO = 5,
+	HT_IOT_PEER_MAX = 6
+}HT_IOT_PEER_E, *PHTIOT_PEER_E;
+#endif
+#if 1
+#ifdef RTL8192SU
+		static u32 edca_setting_DL[HT_IOT_PEER_MAX] =
+		// UNKNOWN	REALTEK_90	/*REALTEK_92SE*/	BROADCOM	RALINK		ATHEROS		CISCO		MARVELL		92U_AP		SELF_AP
+		   { 0xa44f, 	0x5ea44f, 	0x5ea44f,		0xa44f,		0xa44f, 		0xa44f, 		0xa630,		0xa42b,		0x5e4322,	0x5e4322};
+		static u32 edca_setting_UL[HT_IOT_PEER_MAX] =
+		// UNKNOWN	REALTEK		/*REALTEK_92SE*/	BROADCOM	RALINK		ATHEROS		CISCO		MARVELL		92U_AP		SELF_AP
+		   { 0x5ea44f, 	0xa44f, 	0x5ea44f,		0x5e4322, 	0x5ea422, 	0x5e4322, 	0x3ea44f,	0x5ea42b,	0x5e4322,	0x5e4322};
+
+#else
+
+static u32 edca_setting_DL[HT_IOT_PEER_MAX] =
+		{ 0x5e4322, 	0x5e4322, 	0x5ea44f,		0x5e4322, 	0x604322, 	0xa44f, 	0x5ea44f};
+static u32 edca_setting_UL[HT_IOT_PEER_MAX] =
+		{ 0x5e4322, 	0xa44f, 	0x5ea44f,	        0x5e4322, 	0x604322, 	0x5ea44f, 	0x5ea44f};
+
+#endif
+#endif
+
+#define RTK_UL_EDCA 0xa44f
+#define RTK_DL_EDCA 0x5e4322
+/*---------------------------Define Local Constant---------------------------*/
+
+
+/*------------------------Define global variable-----------------------------*/
+// Debug variable ?
+dig_t	dm_digtable;
+// Store current shoftware write register content for MAC PHY.
+u8		dm_shadow[16][256] = {{0}};
+// For Dynamic Rx Path Selection by Signal Strength
+DRxPathSel	DM_RxPathSelTable;
+/*------------------------Define global variable-----------------------------*/
+
+
+/*------------------------Define local variable------------------------------*/
+/*------------------------Define local variable------------------------------*/
+
+
+/*--------------------Define export function prototype-----------------------*/
+#ifdef TO_DO_LIST
+static	void dm_CheckProtection(struct net_device *dev);
+#endif
+extern	void	init_hal_dm(struct net_device *dev);
+extern	void deinit_hal_dm(struct net_device *dev);
+
+extern void hal_dm_watchdog(struct net_device *dev);
+
+
+extern	void	init_rate_adaptive(struct net_device *dev);
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+extern	void	dm_txpower_trackingcallback(struct work_struct *work);
+#else
+extern	void	dm_txpower_trackingcallback(struct net_device *dev);
+#endif
+
+extern	void	dm_cck_txpower_adjust(struct net_device *dev,bool  binch14);
+extern	void	dm_restore_dynamic_mechanism_state(struct net_device *dev);
+extern	void	dm_backup_dynamic_mechanism_state(struct net_device *dev);
+extern	void	dm_change_dynamic_initgain_thresh(struct net_device *dev,
+								u32		dm_type,
+								u32		dm_value);
+extern	void	DM_ChangeFsyncSetting(struct net_device *dev,
+												s32		DM_Type,
+												s32		DM_Value);
+extern	void dm_force_tx_fw_info(struct net_device *dev,
+										u32		force_type,
+										u32		force_value);
+extern	void	dm_init_edca_turbo(struct net_device *dev);
+extern	void	dm_rf_operation_test_callback(unsigned long data);
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+extern	void	dm_rf_pathcheck_workitemcallback(struct work_struct *work);
+#else
+extern	void	dm_rf_pathcheck_workitemcallback(struct net_device *dev);
+#endif
+extern	void dm_fsync_timer_callback(unsigned long data);
+#if 0
+extern	bool	dm_check_lbus_status(struct net_device *dev);
+#endif
+extern	void dm_check_fsync(struct net_device *dev);
+extern	void	dm_shadow_init(struct net_device *dev);
+
+
+/*--------------------Define export function prototype-----------------------*/
+
+
+/*---------------------Define local function prototype-----------------------*/
+// DM --> Rate Adaptive
+static	void	dm_check_rate_adaptive(struct net_device *dev);
+
+// DM --> Bandwidth switch
+static	void	dm_init_bandwidth_autoswitch(struct net_device *dev);
+static	void	dm_bandwidth_autoswitch(	struct net_device *dev);
+
+// DM --> TX power control
+//static	void	dm_initialize_txpower_tracking(struct net_device *dev);
+
+static	void	dm_check_txpower_tracking(struct net_device *dev);
+
+
+
+//static	void	dm_txpower_reset_recovery(struct net_device *dev);
+
+
+// DM --> BB init gain restore
+#ifndef RTL8192U
+static	void	dm_bb_initialgain_restore(struct net_device *dev);
+
+
+// DM --> BB init gain backup
+static	void	dm_bb_initialgain_backup(struct net_device *dev);
+#endif
+// DM --> Dynamic Init Gain by RSSI
+static	void	dm_dig_init(struct net_device *dev);
+static	void	dm_ctrl_initgain_byrssi(struct net_device *dev);
+static	void	dm_ctrl_initgain_byrssi_highpwr(struct net_device *dev);
+static	void	dm_ctrl_initgain_byrssi_by_driverrssi(	struct net_device *dev);
+static	void	dm_ctrl_initgain_byrssi_by_fwfalse_alarm(struct net_device *dev);
+static	void	dm_initial_gain(struct net_device *dev);
+static	void	dm_pd_th(struct net_device *dev);
+static	void	dm_cs_ratio(struct net_device *dev);
+
+static	void dm_init_ctstoself(struct net_device *dev);
+// DM --> EDCA turboe mode control
+static	void	dm_check_edca_turbo(struct net_device *dev);
+
+// DM --> HW RF control
+static	void	dm_check_rfctrl_gpio(struct net_device *dev);
+
+#ifndef RTL8190P
+//static	void	dm_gpio_change_rf(struct net_device *dev);
+#endif
+// DM --> Check PBC
+static	void dm_check_pbc_gpio(struct net_device *dev);
+
+
+// DM --> Check current RX RF path state
+static	void	dm_check_rx_path_selection(struct net_device *dev);
+static 	void dm_init_rxpath_selection(struct net_device *dev);
+static	void dm_rxpath_sel_byrssi(struct net_device *dev);
+
+
+// DM --> Fsync for broadcom ap
+static void dm_init_fsync(struct net_device *dev);
+static void dm_deInit_fsync(struct net_device *dev);
+
+//Added by vivi, 20080522
+static	void	dm_check_txrateandretrycount(struct net_device *dev);
+
+/*---------------------Define local function prototype-----------------------*/
+
+/*---------------------Define of Tx Power Control For Near/Far Range --------*/   //Add by Jacken 2008/02/18
+static	void	dm_init_dynamic_txpower(struct net_device *dev);
+static	void	dm_dynamic_txpower(struct net_device *dev);
+
+
+// DM --> For rate adaptive and DIG, we must send RSSI to firmware
+static	void dm_send_rssi_tofw(struct net_device *dev);
+static	void	dm_ctstoself(struct net_device *dev);
+/*---------------------------Define function prototype------------------------*/
+//================================================================================
+//	HW Dynamic mechanism interface.
+//================================================================================
+#ifdef RTL8192SU
+static void dm_CheckAggrPolicy(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	PRT_HIGH_THROUGHPUT	pHTInfo = priv->ieee80211->pHTInfo;
+	//u8 			QueueId;
+	//PRT_TCB			pTcb;
+	bool			bAmsduEnable = false;
+
+	static u8		lastTxOkCnt = 0;
+	static u8		lastRxOkCnt = 0;
+	u8			curTxOkCnt = 0;
+	u8			curRxOkCnt = 0;
+
+	// Determine if A-MSDU policy.
+	if(priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_HYBRID_AGGREGATION)
+	{
+		if(read_nic_byte(dev, INIMCS_SEL) > DESC92S_RATE54M)
+			bAmsduEnable = true;
+	}
+	else if(priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_AMSDU_ENABLE)
+	{
+		if(read_nic_byte(dev, INIMCS_SEL) > DESC92S_RATE54M)
+		{
+			curTxOkCnt = priv->stats.txbytesunicast - lastTxOkCnt;
+			curRxOkCnt = priv->stats.rxbytesunicast - lastRxOkCnt;
+
+			if(curRxOkCnt <= 4*curTxOkCnt)
+				bAmsduEnable = true;
+		}
+	}
+	else
+	{
+		// Do not need to switch aggregation policy.
+		return;
+	}
+
+	// Switch A-MSDU
+	if(bAmsduEnable && !pHTInfo->bCurrent_AMSDU_Support)
+	{
+		pHTInfo->bCurrent_AMSDU_Support = true;
+	}
+	else if(!bAmsduEnable && pHTInfo->bCurrent_AMSDU_Support)
+	{
+#ifdef TO_DO_LIST
+		//PlatformAcquireSpinLock(Adapter, RT_TX_SPINLOCK);
+		for(QueueId = 0; QueueId < MAX_TX_QUEUE; QueueId++)
+		{
+			while(!RTIsListEmpty(&dev->TcbAggrQueue[QueueId]))
+			{
+				pTcb = (PRT_TCB)RTRemoveHeadList(&dev->TcbAggrQueue[QueueId]);
+				dev->TcbCountInAggrQueue[QueueId]--;
+				PreTransmitTCB(dev, pTcb);
+			}
+		}
+		//PlatformReleaseSpinLock(Adapter, RT_TX_SPINLOCK);
+		pHTInfo->bCurrent_AMSDU_Support = false;
+#endif
+	}
+
+	// Determine A-MPDU policy
+	if(priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_AMSDU_ENABLE)
+	{
+		if(!bAmsduEnable)
+			pHTInfo->bCurrentAMPDUEnable = true;
+	}
+
+	// Update local static variables.
+	lastTxOkCnt = priv->stats.txbytesunicast;
+	lastRxOkCnt = priv->stats.rxbytesunicast;
+}
+#endif
+//
+//	Description:
+//		Prepare SW resource for HW dynamic mechanism.
+//
+//	Assumption:
+//		This function is only invoked at driver intialization once.
+//
+//
+extern	void
+init_hal_dm(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	// Undecorated Smoothed Signal Strength, it can utilized to dynamic mechanism.
+	priv->undecorated_smoothed_pwdb = -1;
+
+	//Initial TX Power Control for near/far range , add by amy 2008/05/15, porting from windows code.
+	dm_init_dynamic_txpower(dev);
+	init_rate_adaptive(dev);
+#ifdef RTL8192SU
+	dm_initialize_txpower_tracking(dev);
+#else
+	//dm_initialize_txpower_tracking(dev);
+#endif
+	dm_dig_init(dev);
+	dm_init_edca_turbo(dev);
+	dm_init_bandwidth_autoswitch(dev);
+	dm_init_fsync(dev);
+	dm_init_rxpath_selection(dev);
+	dm_init_ctstoself(dev);
+
+}	// InitHalDm
+
+extern void deinit_hal_dm(struct net_device *dev)
+{
+
+	dm_deInit_fsync(dev);
+
+}
+
+
+#ifdef USB_RX_AGGREGATION_SUPPORT
+void dm_CheckRxAggregation(struct net_device *dev) {
+	struct r8192_priv *priv = ieee80211_priv((struct net_device *)dev);
+	PRT_HIGH_THROUGHPUT	pHTInfo = priv->ieee80211->pHTInfo;
+	static unsigned long	lastTxOkCnt = 0;
+	static unsigned long	lastRxOkCnt = 0;
+	unsigned long		curTxOkCnt = 0;
+	unsigned long		curRxOkCnt = 0;
+
+/*
+	if (pHalData->bForcedUsbRxAggr) {
+		if (pHalData->ForcedUsbRxAggrInfo == 0) {
+			if (pHalData->bCurrentRxAggrEnable) {
+				Adapter->HalFunc.HalUsbRxAggrHandler(Adapter, FALSE);
+			}
+		} else {
+			if (!pHalData->bCurrentRxAggrEnable || (pHalData->ForcedUsbRxAggrInfo != pHalData->LastUsbRxAggrInfoSetting)) {
+				Adapter->HalFunc.HalUsbRxAggrHandler(Adapter, TRUE);
+			}
+		}
+		return;
+	}
+
+*/
+#ifdef RTL8192SU
+	if (priv->bForcedUsbRxAggr) {
+		if (priv->ForcedUsbRxAggrInfo == 0) {
+			if (priv->bCurrentRxAggrEnable) {
+				//Adapter->HalFunc.HalUsbRxAggrHandler(Adapter, FALSE);
+				write_nic_dword(dev, 0x1a8, 0);
+				priv->bCurrentRxAggrEnable = false;
+			}
+		} else {
+			if (!priv->bCurrentRxAggrEnable || (priv->ForcedUsbRxAggrInfo != priv->LastUsbRxAggrInfoSetting)) {
+				u32 ulValue;
+				ulValue = (pHTInfo->UsbRxFwAggrEn<<24) | (pHTInfo->UsbRxFwAggrPageNum<<16) |
+						(pHTInfo->UsbRxFwAggrPacketNum<<8) | (pHTInfo->UsbRxFwAggrTimeout);
+				/*
+				 * If usb rx firmware aggregation is enabled,
+				 * when anyone of three threshold conditions above is reached,
+				 * firmware will send aggregated packet to driver.
+			 	*/
+				write_nic_dword(dev, 0x1a8, ulValue);
+				priv->bCurrentRxAggrEnable = true;
+			}
+		}
+		return;
+	}
+
+	if((priv->ieee80211->mode & WIRELESS_MODE_B) || (priv->ieee80211->mode & WIRELESS_MODE_G))
+	{
+		if (priv->bCurrentRxAggrEnable)
+		{
+			RT_TRACE(COMP_RECV, "dm_CheckRxAggregation() :  Disable Rx Aggregation!!\n");
+			write_nic_dword(dev, 0x1a8, 0);
+			priv->bCurrentRxAggrEnable = false;
+			return;
+		}
+	}
+#endif
+
+	curTxOkCnt = priv->stats.txbytesunicast - lastTxOkCnt;
+	curRxOkCnt = priv->stats.rxbytesunicast - lastRxOkCnt;
+
+	if((curTxOkCnt + curRxOkCnt) < 15000000) {
+		return;
+	}
+
+	if(curTxOkCnt > 4*curRxOkCnt) {
+		if (priv->bCurrentRxAggrEnable) {
+			write_nic_dword(dev, 0x1a8, 0);
+			priv->bCurrentRxAggrEnable = false;
+		}
+	}else{
+		if (!priv->bCurrentRxAggrEnable && !pHTInfo->bCurrentRT2RTAggregation) {
+			u32 ulValue;
+			ulValue = (pHTInfo->UsbRxFwAggrEn<<24) | (pHTInfo->UsbRxFwAggrPageNum<<16) |
+				(pHTInfo->UsbRxFwAggrPacketNum<<8) | (pHTInfo->UsbRxFwAggrTimeout);
+			/*
+			 * If usb rx firmware aggregation is enabled,
+			 * when anyone of three threshold conditions above is reached,
+			 * firmware will send aggregated packet to driver.
+			 */
+			write_nic_dword(dev, 0x1a8, ulValue);
+			priv->bCurrentRxAggrEnable = true;
+		}
+	}
+
+	lastTxOkCnt = priv->stats.txbytesunicast;
+	lastRxOkCnt = priv->stats.rxbytesunicast;
+}	// dm_CheckEdcaTurbo
+#endif
+
+
+#ifdef RTL8192SU
+//#if 0
+extern  void    hal_dm_watchdog(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	if(priv->bInHctTest)
+		return;
+
+
+	dm_check_rfctrl_gpio(dev);
+
+	// Add by hpfan 2008-03-11
+	dm_check_pbc_gpio(dev);
+	dm_check_txrateandretrycount(dev); //moved by tynli
+	dm_check_edca_turbo(dev);
+
+	dm_CheckAggrPolicy(dev);
+
+#ifdef TO_DO_LIST
+	dm_CheckProtection(dev);
+#endif
+
+	// ====================================================
+	// If any dynamic mechanism is ready, put it above this return;
+	// ====================================================
+	//if (IS_HARDWARE_TYPE_8192S(dev))
+	return;
+
+#ifdef USB_RX_AGGREGATION_SUPPORT
+	dm_CheckRxAggregation(dev);
+#endif
+#ifdef TO_DO_LIST
+	if(Adapter->MgntInfo.mActingAsAp)
+	{
+		AP_dm_CheckRateAdaptive(dev);
+		//return;
+	}
+	else
+#endif
+	{
+		dm_check_rate_adaptive(dev);
+	}
+	dm_dynamic_txpower(dev);
+
+	dm_check_txpower_tracking(dev);
+	dm_ctrl_initgain_byrssi(dev);//LZM TMP 090302
+
+	dm_bandwidth_autoswitch(dev);
+
+	dm_check_rx_path_selection(dev);//LZM TMP 090302
+	dm_check_fsync(dev);
+
+	dm_send_rssi_tofw(dev);
+
+	dm_ctstoself(dev);
+
+}	//HalDmWatchDog
+#else
+extern  void    hal_dm_watchdog(struct net_device *dev)
+{
+        //struct r8192_priv *priv = ieee80211_priv(dev);
+
+	//static u8 	previous_bssid[6] ={0};
+
+	/*Add by amy 2008/05/15 ,porting from windows code.*/
+	dm_check_rate_adaptive(dev);
+	dm_dynamic_txpower(dev);
+	dm_check_txrateandretrycount(dev);
+	dm_check_txpower_tracking(dev);
+	dm_ctrl_initgain_byrssi(dev);
+	dm_check_edca_turbo(dev);
+	dm_bandwidth_autoswitch(dev);
+	dm_check_rfctrl_gpio(dev);
+	dm_check_rx_path_selection(dev);
+	dm_check_fsync(dev);
+
+	// Add by amy 2008-05-15 porting from windows code.
+	dm_check_pbc_gpio(dev);
+	dm_send_rssi_tofw(dev);
+	dm_ctstoself(dev);
+#ifdef USB_RX_AGGREGATION_SUPPORT
+	dm_CheckRxAggregation(dev);
+#endif
+}	//HalDmWatchDog
+#endif
+
+/*
+  * Decide Rate Adaptive Set according to distance (signal strength)
+  *	01/11/2008	MHC		Modify input arguments and RATR table level.
+  *	01/16/2008	MHC		RF_Type is assigned in ReadAdapterInfo(). We must call
+  *						the function after making sure RF_Type.
+  */
+extern void init_rate_adaptive(struct net_device * dev)
+{
+
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	prate_adaptive	pra = (prate_adaptive)&priv->rate_adaptive;
+
+	pra->ratr_state = DM_RATR_STA_MAX;
+	pra->high2low_rssi_thresh_for_ra = RateAdaptiveTH_High;
+	pra->low2high_rssi_thresh_for_ra20M = RateAdaptiveTH_Low_20M+5;
+	pra->low2high_rssi_thresh_for_ra40M = RateAdaptiveTH_Low_40M+5;
+
+	pra->high_rssi_thresh_for_ra = RateAdaptiveTH_High+5;
+	pra->low_rssi_thresh_for_ra20M = RateAdaptiveTH_Low_20M;
+	pra->low_rssi_thresh_for_ra40M = RateAdaptiveTH_Low_40M;
+
+	if(priv->CustomerID == RT_CID_819x_Netcore)
+		pra->ping_rssi_enable = 1;
+	else
+		pra->ping_rssi_enable = 0;
+	pra->ping_rssi_thresh_for_ra = 15;
+
+
+	if (priv->rf_type == RF_2T4R)
+	{
+		// 07/10/08 MH Modify for RA smooth scheme.
+		/* 2008/01/11 MH Modify 2T RATR table for different RSSI. 080515 porting by amy from windows code.*/
+		pra->upper_rssi_threshold_ratr		= 	0x8f0f0000;
+		pra->middle_rssi_threshold_ratr		= 	0x8f0ff000;
+		pra->low_rssi_threshold_ratr		= 	0x8f0ff001;
+		pra->low_rssi_threshold_ratr_40M	= 	0x8f0ff005;
+		pra->low_rssi_threshold_ratr_20M	= 	0x8f0ff001;
+		pra->ping_rssi_ratr	= 	0x0000000d;//cosa add for test
+	}
+	else if (priv->rf_type == RF_1T2R)
+	{
+		pra->upper_rssi_threshold_ratr		= 	0x000f0000;
+		pra->middle_rssi_threshold_ratr		= 	0x000ff000;
+		pra->low_rssi_threshold_ratr		= 	0x000ff001;
+		pra->low_rssi_threshold_ratr_40M	= 	0x000ff005;
+		pra->low_rssi_threshold_ratr_20M	= 	0x000ff001;
+		pra->ping_rssi_ratr	= 	0x0000000d;//cosa add for test
+	}
+
+}	// InitRateAdaptive
+
+
+/*-----------------------------------------------------------------------------
+ * Function:	dm_check_rate_adaptive()
+ *
+ * Overview:
+ *
+ * Input:		NONE
+ *
+ * Output:		NONE
+ *
+ * Return:		NONE
+ *
+ * Revised History:
+ *	When		Who		Remark
+ *	05/26/08	amy 	Create version 0 proting from windows code.
+ *
+ *---------------------------------------------------------------------------*/
+static void dm_check_rate_adaptive(struct net_device * dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	PRT_HIGH_THROUGHPUT	pHTInfo = priv->ieee80211->pHTInfo;
+	prate_adaptive			pra = (prate_adaptive)&priv->rate_adaptive;
+	u32						currentRATR, targetRATR = 0;
+	u32						LowRSSIThreshForRA = 0, HighRSSIThreshForRA = 0;
+	bool						bshort_gi_enabled = false;
+	static u8					ping_rssi_state=0;
+
+
+	if(!priv->up)
+	{
+		RT_TRACE(COMP_RATE, "<---- dm_check_rate_adaptive(): driver is going to unload\n");
+		return;
+	}
+
+	if(pra->rate_adaptive_disabled)//this variable is set by ioctl.
+		return;
+
+	// TODO: Only 11n mode is implemented currently,
+	if( !(priv->ieee80211->mode == WIRELESS_MODE_N_24G ||
+		 priv->ieee80211->mode == WIRELESS_MODE_N_5G))
+		 return;
+
+	if( priv->ieee80211->state == IEEE80211_LINKED )
+	{
+	//	RT_TRACE(COMP_RATE, "dm_CheckRateAdaptive(): \t");
+
+		//
+		// Check whether Short GI is enabled
+		//
+		bshort_gi_enabled = (pHTInfo->bCurTxBW40MHz && pHTInfo->bCurShortGI40MHz) ||
+			(!pHTInfo->bCurTxBW40MHz && pHTInfo->bCurShortGI20MHz);
+
+
+		pra->upper_rssi_threshold_ratr =
+				(pra->upper_rssi_threshold_ratr & (~BIT31)) | ((bshort_gi_enabled)? BIT31:0) ;
+
+		pra->middle_rssi_threshold_ratr =
+				(pra->middle_rssi_threshold_ratr & (~BIT31)) | ((bshort_gi_enabled)? BIT31:0) ;
+
+		if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
+		{
+			pra->low_rssi_threshold_ratr =
+				(pra->low_rssi_threshold_ratr_40M & (~BIT31)) | ((bshort_gi_enabled)? BIT31:0) ;
+		}
+		else
+		{
+			pra->low_rssi_threshold_ratr =
+			(pra->low_rssi_threshold_ratr_20M & (~BIT31)) | ((bshort_gi_enabled)? BIT31:0) ;
+		}
+		//cosa add for test
+		pra->ping_rssi_ratr =
+				(pra->ping_rssi_ratr & (~BIT31)) | ((bshort_gi_enabled)? BIT31:0) ;
+
+		/* 2007/10/08 MH We support RA smooth scheme now. When it is the first
+		   time to link with AP. We will not change upper/lower threshold. If
+		   STA stay in high or low level, we must change two different threshold
+		   to prevent jumping frequently. */
+		if (pra->ratr_state == DM_RATR_STA_HIGH)
+		{
+			HighRSSIThreshForRA 	= pra->high2low_rssi_thresh_for_ra;
+			LowRSSIThreshForRA	= (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)?
+					(pra->low_rssi_thresh_for_ra40M):(pra->low_rssi_thresh_for_ra20M);
+		}
+		else if (pra->ratr_state == DM_RATR_STA_LOW)
+		{
+			HighRSSIThreshForRA	= pra->high_rssi_thresh_for_ra;
+			LowRSSIThreshForRA 	= (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)?
+					(pra->low2high_rssi_thresh_for_ra40M):(pra->low2high_rssi_thresh_for_ra20M);
+		}
+		else
+		{
+			HighRSSIThreshForRA	= pra->high_rssi_thresh_for_ra;
+			LowRSSIThreshForRA	= (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)?
+					(pra->low_rssi_thresh_for_ra40M):(pra->low_rssi_thresh_for_ra20M);
+		}
+
+		//DbgPrint("[DM] THresh H/L=%d/%d\n\r", RATR.HighRSSIThreshForRA, RATR.LowRSSIThreshForRA);
+		if(priv->undecorated_smoothed_pwdb >= (long)HighRSSIThreshForRA)
+		{
+			//DbgPrint("[DM] RSSI=%d STA=HIGH\n\r", pHalData->UndecoratedSmoothedPWDB);
+			pra->ratr_state = DM_RATR_STA_HIGH;
+			targetRATR = pra->upper_rssi_threshold_ratr;
+		}else if(priv->undecorated_smoothed_pwdb >= (long)LowRSSIThreshForRA)
+		{
+			//DbgPrint("[DM] RSSI=%d STA=Middle\n\r", pHalData->UndecoratedSmoothedPWDB);
+			pra->ratr_state = DM_RATR_STA_MIDDLE;
+			targetRATR = pra->middle_rssi_threshold_ratr;
+		}else
+		{
+			//DbgPrint("[DM] RSSI=%d STA=LOW\n\r", pHalData->UndecoratedSmoothedPWDB);
+			pra->ratr_state = DM_RATR_STA_LOW;
+			targetRATR = pra->low_rssi_threshold_ratr;
+		}
+
+			//cosa add for test
+		if(pra->ping_rssi_enable)
+		{
+			//pHalData->UndecoratedSmoothedPWDB = 19;
+			if(priv->undecorated_smoothed_pwdb < (long)(pra->ping_rssi_thresh_for_ra+5))
+			{
+				if( (priv->undecorated_smoothed_pwdb < (long)pra->ping_rssi_thresh_for_ra) ||
+					ping_rssi_state )
+				{
+					//DbgPrint("TestRSSI = %d, set RATR to 0x%x \n", pHalData->UndecoratedSmoothedPWDB, pRA->TestRSSIRATR);
+					pra->ratr_state = DM_RATR_STA_LOW;
+					targetRATR = pra->ping_rssi_ratr;
+					ping_rssi_state = 1;
+				}
+				//else
+				//	DbgPrint("TestRSSI is between the range. \n");
+			}
+			else
+			{
+				//DbgPrint("TestRSSI Recover to 0x%x \n", targetRATR);
+				ping_rssi_state = 0;
+			}
+		}
+
+		// 2008.04.01
+#if 1
+		// For RTL819X, if pairwisekey = wep/tkip, we support only MCS0~7.
+		if(priv->ieee80211->GetHalfNmodeSupportByAPsHandler(dev))
+			targetRATR &=  0xf00fffff;
+#endif
+
+		//
+		// Check whether updating of RATR0 is required
+		//
+		currentRATR = read_nic_dword(dev, RATR0);
+		if( targetRATR !=  currentRATR )
+		{
+			u32 ratr_value;
+			ratr_value = targetRATR;
+			RT_TRACE(COMP_RATE,"currentRATR = %x, targetRATR = %x\n", currentRATR, targetRATR);
+			if(priv->rf_type == RF_1T2R)
+			{
+				ratr_value &= ~(RATE_ALL_OFDM_2SS);
+			}
+			write_nic_dword(dev, RATR0, ratr_value);
+			write_nic_byte(dev, UFWP, 1);
+
+			pra->last_ratr = targetRATR;
+		}
+
+	}
+	else
+	{
+		pra->ratr_state = DM_RATR_STA_MAX;
+	}
+
+}	// dm_CheckRateAdaptive
+
+
+static void dm_init_bandwidth_autoswitch(struct net_device * dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	priv->ieee80211->bandwidth_auto_switch.threshold_20Mhzto40Mhz = BW_AUTO_SWITCH_LOW_HIGH;
+	priv->ieee80211->bandwidth_auto_switch.threshold_40Mhzto20Mhz = BW_AUTO_SWITCH_HIGH_LOW;
+	priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz = false;
+	priv->ieee80211->bandwidth_auto_switch.bautoswitch_enable = false;
+
+}	// dm_init_bandwidth_autoswitch
+
+
+static void dm_bandwidth_autoswitch(struct net_device * dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	if(priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20 ||!priv->ieee80211->bandwidth_auto_switch.bautoswitch_enable){
+		return;
+	}else{
+		if(priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz == false){//If send packets in 40 Mhz in 20/40
+			if(priv->undecorated_smoothed_pwdb <= priv->ieee80211->bandwidth_auto_switch.threshold_40Mhzto20Mhz)
+				priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz = true;
+		}else{//in force send packets in 20 Mhz in 20/40
+			if(priv->undecorated_smoothed_pwdb >= priv->ieee80211->bandwidth_auto_switch.threshold_20Mhzto40Mhz)
+				priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz = false;
+
+		}
+	}
+}	// dm_BandwidthAutoSwitch
+
+//OFDM default at 0db, index=6.
+static u32 OFDMSwingTable[OFDM_Table_Length] = {
+	0x7f8001fe,	// 0, +6db
+	0x71c001c7,	// 1, +5db
+	0x65400195,	// 2, +4db
+	0x5a400169,	// 3, +3db
+	0x50800142,	// 4, +2db
+	0x47c0011f,	// 5, +1db
+	0x40000100,	// 6, +0db ===> default, upper for higher temprature, lower for low temprature
+	0x390000e4,	// 7, -1db
+	0x32c000cb,	// 8, -2db
+	0x2d4000b5,	// 9, -3db
+	0x288000a2,	// 10, -4db
+	0x24000090,	// 11, -5db
+	0x20000080,	// 12, -6db
+	0x1c800072,	// 13, -7db
+	0x19800066,	// 14, -8db
+	0x26c0005b,	// 15, -9db
+	0x24400051,	// 16, -10db
+	0x12000048,	// 17, -11db
+	0x10000040	// 18, -12db
+};
+
+static u8	CCKSwingTable_Ch1_Ch13[CCK_Table_length][8] = {
+	{0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04},	// 0, +0db ===> CCK40M default
+	{0x30, 0x2f, 0x29, 0x21, 0x19, 0x10, 0x08, 0x03},	// 1, -1db
+	{0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03},	// 2, -2db
+	{0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03},	// 3, -3db
+	{0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02},	// 4, -4db
+	{0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02},	// 5, -5db
+	{0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02},	// 6, -6db ===> CCK20M default
+	{0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02},	// 7, -7db
+	{0x16, 0x15, 0x12, 0x0f, 0x0b, 0x07, 0x04, 0x01},	// 8, -8db
+	{0x13, 0x13, 0x10, 0x0d, 0x0a, 0x06, 0x03, 0x01},	// 9, -9db
+	{0x11, 0x11, 0x0f, 0x0c, 0x09, 0x06, 0x03, 0x01},	// 10, -10db
+	{0x0f, 0x0f, 0x0d, 0x0b, 0x08, 0x05, 0x03, 0x01}	// 11, -11db
+};
+
+static u8	CCKSwingTable_Ch14[CCK_Table_length][8] = {
+	{0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00},	// 0, +0db  ===> CCK40M default
+	{0x30, 0x2f, 0x29, 0x18, 0x00, 0x00, 0x00, 0x00},	// 1, -1db
+	{0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00},	// 2, -2db
+	{0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00},	// 3, -3db
+	{0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00},	// 4, -4db
+	{0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00},	// 5, -5db
+	{0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00},	// 6, -6db  ===> CCK20M default
+	{0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00},	// 7, -7db
+	{0x16, 0x15, 0x12, 0x0b, 0x00, 0x00, 0x00, 0x00},	// 8, -8db
+	{0x13, 0x13, 0x10, 0x0a, 0x00, 0x00, 0x00, 0x00},	// 9, -9db
+	{0x11, 0x11, 0x0f, 0x09, 0x00, 0x00, 0x00, 0x00},	// 10, -10db
+	{0x0f, 0x0f, 0x0d, 0x08, 0x00, 0x00, 0x00, 0x00}	// 11, -11db
+};
+
+static void dm_TXPowerTrackingCallback_TSSI(struct net_device * dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	bool						bHighpowerstate, viviflag = FALSE;
+	DCMD_TXCMD_T			tx_cmd;
+	u8						powerlevelOFDM24G;
+	int	    					i =0, j = 0, k = 0;
+	u8						RF_Type, tmp_report[5]={0, 0, 0, 0, 0};
+	u32						Value;
+	u8						Pwr_Flag;
+	u16						Avg_TSSI_Meas, TSSI_13dBm, Avg_TSSI_Meas_from_driver=0;
+	//RT_STATUS 				rtStatus = RT_STATUS_SUCCESS;
+#ifdef RTL8192U
+	bool rtStatus = true;
+#endif
+	u32						delta=0;
+
+	write_nic_byte(dev, 0x1ba, 0);
+
+	priv->ieee80211->bdynamic_txpower_enable = false;
+	bHighpowerstate = priv->bDynamicTxHighPower;
+
+	powerlevelOFDM24G = (u8)(priv->Pwr_Track>>24);
+	RF_Type = priv->rf_type;
+	Value = (RF_Type<<8) | powerlevelOFDM24G;
+
+	RT_TRACE(COMP_POWER_TRACKING, "powerlevelOFDM24G = %x\n", powerlevelOFDM24G);
+
+	for(j = 0; j<=30; j++)
+{	//fill tx_cmd
+
+	tx_cmd.Op		= TXCMD_SET_TX_PWR_TRACKING;
+	tx_cmd.Length	= 4;
+	tx_cmd.Value		= Value;
+#ifdef RTL8192U
+	rtStatus = SendTxCommandPacket(dev, &tx_cmd, 12);
+	if (rtStatus == false)
+	{
+		RT_TRACE(COMP_POWER_TRACKING, "Set configuration with tx cmd queue fail!\n");
+	}
+#else
+	cmpk_message_handle_tx(dev, (u8*)&tx_cmd,
+								DESC_PACKET_TYPE_INIT, sizeof(DCMD_TXCMD_T));
+#endif
+	mdelay(1);
+	//DbgPrint("hi, vivi, strange\n");
+	for(i = 0;i <= 30; i++)
+	{
+		Pwr_Flag = read_nic_byte(dev, 0x1ba);
+
+		if (Pwr_Flag == 0)
+		{
+			mdelay(1);
+			continue;
+		}
+#ifdef RTL8190P
+		Avg_TSSI_Meas = read_nic_word(dev, 0x1bc);
+#else
+		Avg_TSSI_Meas = read_nic_word(dev, 0x13c);
+#endif
+		if(Avg_TSSI_Meas == 0)
+		{
+			write_nic_byte(dev, 0x1ba, 0);
+			break;
+		}
+
+		for(k = 0;k < 5; k++)
+		{
+#ifdef RTL8190P
+			tmp_report[k] = read_nic_byte(dev, 0x1d8+k);
+#else
+			if(k !=4)
+				tmp_report[k] = read_nic_byte(dev, 0x134+k);
+			else
+				tmp_report[k] = read_nic_byte(dev, 0x13e);
+#endif
+			RT_TRACE(COMP_POWER_TRACKING, "TSSI_report_value = %d\n", tmp_report[k]);
+		}
+
+		//check if the report value is right
+		for(k = 0;k < 5; k++)
+		{
+			if(tmp_report[k] <= 20)
+			{
+				viviflag =TRUE;
+				break;
+			}
+		}
+		if(viviflag ==TRUE)
+		{
+			write_nic_byte(dev, 0x1ba, 0);
+			viviflag = FALSE;
+			RT_TRACE(COMP_POWER_TRACKING, "we filted this data\n");
+			for(k = 0;k < 5; k++)
+				tmp_report[k] = 0;
+			break;
+		}
+
+		for(k = 0;k < 5; k++)
+		{
+			Avg_TSSI_Meas_from_driver += tmp_report[k];
+		}
+
+		Avg_TSSI_Meas_from_driver = Avg_TSSI_Meas_from_driver*100/5;
+		RT_TRACE(COMP_POWER_TRACKING, "Avg_TSSI_Meas_from_driver = %d\n", Avg_TSSI_Meas_from_driver);
+		TSSI_13dBm = priv->TSSI_13dBm;
+		RT_TRACE(COMP_POWER_TRACKING, "TSSI_13dBm = %d\n", TSSI_13dBm);
+
+		//if(abs(Avg_TSSI_Meas_from_driver - TSSI_13dBm) <= E_FOR_TX_POWER_TRACK)
+		// For MacOS-compatible
+		if(Avg_TSSI_Meas_from_driver > TSSI_13dBm)
+			delta = Avg_TSSI_Meas_from_driver - TSSI_13dBm;
+		else
+			delta = TSSI_13dBm - Avg_TSSI_Meas_from_driver;
+
+		if(delta <= E_FOR_TX_POWER_TRACK)
+		{
+			priv->ieee80211->bdynamic_txpower_enable = TRUE;
+			write_nic_byte(dev, 0x1ba, 0);
+			RT_TRACE(COMP_POWER_TRACKING, "tx power track is done\n");
+			RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex = %d\n", priv->rfa_txpowertrackingindex);
+			RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex_real = %d\n", priv->rfa_txpowertrackingindex_real);
+#ifdef RTL8190P
+			RT_TRACE(COMP_POWER_TRACKING, "priv->rfc_txpowertrackingindex = %d\n", priv->rfc_txpowertrackingindex);
+			RT_TRACE(COMP_POWER_TRACKING, "priv->rfc_txpowertrackingindex_real = %d\n", priv->rfc_txpowertrackingindex_real);
+#endif
+			RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation_difference = %d\n", priv->cck_present_attentuation_difference);
+			RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation = %d\n", priv->cck_present_attentuation);
+			return;
+		}
+		else
+		{
+			if(Avg_TSSI_Meas_from_driver < TSSI_13dBm - E_FOR_TX_POWER_TRACK)
+			{
+				if((priv->rfa_txpowertrackingindex > 0)
+#ifdef RTL8190P
+					&&(priv->rfc_txpowertrackingindex > 0)
+#endif
+				)
+				{
+					priv->rfa_txpowertrackingindex--;
+					if(priv->rfa_txpowertrackingindex_real > 4)
+					{
+						priv->rfa_txpowertrackingindex_real--;
+						rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex_real].txbbgain_value);
+					}
+#ifdef RTL8190P
+					priv->rfc_txpowertrackingindex--;
+					if(priv->rfc_txpowertrackingindex_real > 4)
+					{
+						priv->rfc_txpowertrackingindex_real--;
+						rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value);
+					}
+#endif
+				}
+			}
+			else
+			{
+				if((priv->rfa_txpowertrackingindex < 36)
+#ifdef RTL8190P
+					&&(priv->rfc_txpowertrackingindex < 36)
+#endif
+					)
+				{
+					priv->rfa_txpowertrackingindex++;
+					priv->rfa_txpowertrackingindex_real++;
+					rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex_real].txbbgain_value);
+
+#ifdef RTL8190P
+					priv->rfc_txpowertrackingindex++;
+					priv->rfc_txpowertrackingindex_real++;
+					rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value);
+#endif
+				}
+			}
+			priv->cck_present_attentuation_difference
+				= priv->rfa_txpowertrackingindex - priv->rfa_txpowertracking_default;
+
+			if(priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20)
+				priv->cck_present_attentuation
+				= priv->cck_present_attentuation_20Mdefault + priv->cck_present_attentuation_difference;
+			else
+				priv->cck_present_attentuation
+				= priv->cck_present_attentuation_40Mdefault + priv->cck_present_attentuation_difference;
+
+			if(priv->cck_present_attentuation > -1&&priv->cck_present_attentuation <23)
+			{
+				if(priv->ieee80211->current_network.channel == 14 && !priv->bcck_in_ch14)
+				{
+					priv->bcck_in_ch14 = TRUE;
+					dm_cck_txpower_adjust(dev,priv->bcck_in_ch14);
+				}
+				else if(priv->ieee80211->current_network.channel != 14 && priv->bcck_in_ch14)
+				{
+					priv->bcck_in_ch14 = FALSE;
+					dm_cck_txpower_adjust(dev,priv->bcck_in_ch14);
+				}
+				else
+					dm_cck_txpower_adjust(dev,priv->bcck_in_ch14);
+			}
+		RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex = %d\n", priv->rfa_txpowertrackingindex);
+		RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex_real = %d\n", priv->rfa_txpowertrackingindex_real);
+#ifdef RTL8190P
+		RT_TRACE(COMP_POWER_TRACKING, "priv->rfc_txpowertrackingindex = %d\n", priv->rfc_txpowertrackingindex);
+		RT_TRACE(COMP_POWER_TRACKING, "priv->rfc_txpowertrackingindex_real = %d\n", priv->rfc_txpowertrackingindex_real);
+#endif
+		RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation_difference = %d\n", priv->cck_present_attentuation_difference);
+		RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation = %d\n", priv->cck_present_attentuation);
+
+		if (priv->cck_present_attentuation_difference <= -12||priv->cck_present_attentuation_difference >= 24)
+		{
+			priv->ieee80211->bdynamic_txpower_enable = TRUE;
+			write_nic_byte(dev, 0x1ba, 0);
+			RT_TRACE(COMP_POWER_TRACKING, "tx power track--->limited\n");
+			return;
+		}
+
+
+	}
+		write_nic_byte(dev, 0x1ba, 0);
+		Avg_TSSI_Meas_from_driver = 0;
+		for(k = 0;k < 5; k++)
+			tmp_report[k] = 0;
+		break;
+	}
+}
+		priv->ieee80211->bdynamic_txpower_enable = TRUE;
+		write_nic_byte(dev, 0x1ba, 0);
+}
+
+static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device * dev)
+{
+#define ThermalMeterVal	9
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u32 tmpRegA, TempCCk;
+	u8 tmpOFDMindex, tmpCCKindex, tmpCCK20Mindex, tmpCCK40Mindex, tmpval;
+	int i =0, CCKSwingNeedUpdate=0;
+
+	if(!priv->btxpower_trackingInit)
+	{
+		//Query OFDM default setting
+		tmpRegA= rtl8192_QueryBBReg(dev, rOFDM0_XATxIQImbalance, bMaskDWord);
+		for(i=0; i<OFDM_Table_Length; i++)	//find the index
+		{
+			if(tmpRegA == OFDMSwingTable[i])
+			{
+				priv->OFDM_index= (u8)i;
+				RT_TRACE(COMP_POWER_TRACKING, "Initial reg0x%x = 0x%x, OFDM_index=0x%x\n",
+					rOFDM0_XATxIQImbalance, tmpRegA, priv->OFDM_index);
+			}
+		}
+
+		//Query CCK default setting From 0xa22
+		TempCCk = rtl8192_QueryBBReg(dev, rCCK0_TxFilter1, bMaskByte2);
+		for(i=0 ; i<CCK_Table_length ; i++)
+		{
+			if(TempCCk == (u32)CCKSwingTable_Ch1_Ch13[i][0])
+			{
+				priv->CCK_index =(u8) i;
+				RT_TRACE(COMP_POWER_TRACKING, "Initial reg0x%x = 0x%x, CCK_index=0x%x\n",
+					rCCK0_TxFilter1, TempCCk, priv->CCK_index);
+				break;
+			}
+		}
+		priv->btxpower_trackingInit = TRUE;
+		//pHalData->TXPowercount = 0;
+		return;
+	}
+
+	//==========================
+	// this is only for test, should be masked
+#if 0
+{
+	//UINT32	eRFPath;
+	//UINT32	start_rf, end_rf;
+	UINT32	curr_addr;
+	//UINT32	reg_addr;
+	//UINT32	reg_addr_end;
+	UINT32	reg_value;
+	//start_rf 		= RF90_PATH_A;
+	//end_rf 			= RF90_PATH_B;//RF90_PATH_MAX;
+	//reg_addr 		= 0x0;
+	//reg_addr_end 	= 0x2F;
+
+		for (curr_addr = 0; curr_addr < 0x2d; curr_addr++)
+		{
+			reg_value = PHY_QueryRFReg(	Adapter, (RF90_RADIO_PATH_E)RF90_PATH_A,
+										curr_addr, bMaskDWord);
+		}
+
+	pHalData->TXPowercount = 0;
+	return;
+}
+#endif
+	//==========================
+
+	// read and filter out unreasonable value
+	tmpRegA = rtl8192_phy_QueryRFReg(dev, RF90_PATH_A, 0x12, 0x078);	// 0x12: RF Reg[10:7]
+	RT_TRACE(COMP_POWER_TRACKING, "Readback ThermalMeterA = %d \n", tmpRegA);
+	if(tmpRegA < 3 || tmpRegA > 13)
+		return;
+	if(tmpRegA >= 12)	// if over 12, TP will be bad when high temprature
+		tmpRegA = 12;
+	RT_TRACE(COMP_POWER_TRACKING, "Valid ThermalMeterA = %d \n", tmpRegA);
+	priv->ThermalMeter[0] = ThermalMeterVal;	//We use fixed value by Bryant's suggestion
+	priv->ThermalMeter[1] = ThermalMeterVal;	//We use fixed value by Bryant's suggestion
+
+	//Get current RF-A temprature index
+	if(priv->ThermalMeter[0] >= (u8)tmpRegA)	//lower temprature
+	{
+		tmpOFDMindex = tmpCCK20Mindex = 6+(priv->ThermalMeter[0]-(u8)tmpRegA);
+		tmpCCK40Mindex = tmpCCK20Mindex - 6;
+		if(tmpOFDMindex >= OFDM_Table_Length)
+			tmpOFDMindex = OFDM_Table_Length-1;
+		if(tmpCCK20Mindex >= CCK_Table_length)
+			tmpCCK20Mindex = CCK_Table_length-1;
+		if(tmpCCK40Mindex >= CCK_Table_length)
+			tmpCCK40Mindex = CCK_Table_length-1;
+	}
+	else
+	{
+		tmpval = ((u8)tmpRegA - priv->ThermalMeter[0]);
+		if(tmpval >= 6)								// higher temprature
+			tmpOFDMindex = tmpCCK20Mindex = 0;		// max to +6dB
+		else
+			tmpOFDMindex = tmpCCK20Mindex = 6 - tmpval;
+		tmpCCK40Mindex = 0;
+	}
+	//DbgPrint("%ddb, tmpOFDMindex = %d, tmpCCK20Mindex = %d, tmpCCK40Mindex = %d",
+		//((u1Byte)tmpRegA - pHalData->ThermalMeter[0]),
+		//tmpOFDMindex, tmpCCK20Mindex, tmpCCK40Mindex);
+	if(priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)	//40M
+		tmpCCKindex = tmpCCK40Mindex;
+	else
+		tmpCCKindex = tmpCCK20Mindex;
+
+	if(priv->ieee80211->current_network.channel == 14 && !priv->bcck_in_ch14)
+	{
+		priv->bcck_in_ch14 = TRUE;
+		CCKSwingNeedUpdate = 1;
+	}
+	else if(priv->ieee80211->current_network.channel != 14 && priv->bcck_in_ch14)
+	{
+		priv->bcck_in_ch14 = FALSE;
+		CCKSwingNeedUpdate = 1;
+	}
+
+	if(priv->CCK_index != tmpCCKindex)
+	{
+		priv->CCK_index = tmpCCKindex;
+		CCKSwingNeedUpdate = 1;
+	}
+
+	if(CCKSwingNeedUpdate)
+	{
+		//DbgPrint("Update CCK Swing, CCK_index = %d\n", pHalData->CCK_index);
+		dm_cck_txpower_adjust(dev, priv->bcck_in_ch14);
+	}
+	if(priv->OFDM_index != tmpOFDMindex)
+	{
+		priv->OFDM_index = tmpOFDMindex;
+		rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, OFDMSwingTable[priv->OFDM_index]);
+		RT_TRACE(COMP_POWER_TRACKING, "Update OFDMSwing[%d] = 0x%x\n",
+			priv->OFDM_index, OFDMSwingTable[priv->OFDM_index]);
+	}
+	priv->txpower_count = 0;
+}
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+extern	void	dm_txpower_trackingcallback(struct work_struct *work)
+{
+	struct delayed_work *dwork = container_of(work,struct delayed_work,work);
+       struct r8192_priv *priv = container_of(dwork,struct r8192_priv,txpower_tracking_wq);
+       struct net_device *dev = priv->ieee80211->dev;
+#else
+extern	void	dm_txpower_trackingcallback(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+#endif
+
+#ifdef RTL8190P
+	dm_TXPowerTrackingCallback_TSSI(dev);
+#else
+	if(priv->bDcut == TRUE)
+		dm_TXPowerTrackingCallback_TSSI(dev);
+	else
+		dm_TXPowerTrackingCallback_ThermalMeter(dev);
+#endif
+}
+
+
+static void dm_InitializeTXPowerTracking_TSSI(struct net_device *dev)
+{
+
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	//Initial the Tx BB index and mapping value
+	priv->txbbgain_table[0].txbb_iq_amplifygain = 	 		12;
+	priv->txbbgain_table[0].txbbgain_value=0x7f8001fe;
+	priv->txbbgain_table[1].txbb_iq_amplifygain = 	 		11;
+	priv->txbbgain_table[1].txbbgain_value=0x788001e2;
+	priv->txbbgain_table[2].txbb_iq_amplifygain = 	 		10;
+	priv->txbbgain_table[2].txbbgain_value=0x71c001c7;
+	priv->txbbgain_table[3].txbb_iq_amplifygain = 	 		9;
+	priv->txbbgain_table[3].txbbgain_value=0x6b8001ae;
+	priv->txbbgain_table[4].txbb_iq_amplifygain = 		       8;
+	priv->txbbgain_table[4].txbbgain_value=0x65400195;
+	priv->txbbgain_table[5].txbb_iq_amplifygain = 		       7;
+	priv->txbbgain_table[5].txbbgain_value=0x5fc0017f;
+	priv->txbbgain_table[6].txbb_iq_amplifygain = 		       6;
+	priv->txbbgain_table[6].txbbgain_value=0x5a400169;
+	priv->txbbgain_table[7].txbb_iq_amplifygain = 		       5;
+	priv->txbbgain_table[7].txbbgain_value=0x55400155;
+	priv->txbbgain_table[8].txbb_iq_amplifygain = 		       4;
+	priv->txbbgain_table[8].txbbgain_value=0x50800142;
+	priv->txbbgain_table[9].txbb_iq_amplifygain = 		       3;
+	priv->txbbgain_table[9].txbbgain_value=0x4c000130;
+	priv->txbbgain_table[10].txbb_iq_amplifygain = 		       2;
+	priv->txbbgain_table[10].txbbgain_value=0x47c0011f;
+	priv->txbbgain_table[11].txbb_iq_amplifygain = 		       1;
+	priv->txbbgain_table[11].txbbgain_value=0x43c0010f;
+	priv->txbbgain_table[12].txbb_iq_amplifygain = 		       0;
+	priv->txbbgain_table[12].txbbgain_value=0x40000100;
+	priv->txbbgain_table[13].txbb_iq_amplifygain = 		       -1;
+	priv->txbbgain_table[13].txbbgain_value=0x3c8000f2;
+	priv->txbbgain_table[14].txbb_iq_amplifygain = 		     -2;
+	priv->txbbgain_table[14].txbbgain_value=0x390000e4;
+	priv->txbbgain_table[15].txbb_iq_amplifygain = 		     -3;
+	priv->txbbgain_table[15].txbbgain_value=0x35c000d7;
+	priv->txbbgain_table[16].txbb_iq_amplifygain = 		     -4;
+	priv->txbbgain_table[16].txbbgain_value=0x32c000cb;
+	priv->txbbgain_table[17].txbb_iq_amplifygain = 		     -5;
+	priv->txbbgain_table[17].txbbgain_value=0x300000c0;
+	priv->txbbgain_table[18].txbb_iq_amplifygain = 		 	    -6;
+	priv->txbbgain_table[18].txbbgain_value=0x2d4000b5;
+	priv->txbbgain_table[19].txbb_iq_amplifygain = 		     -7;
+	priv->txbbgain_table[19].txbbgain_value=0x2ac000ab;
+	priv->txbbgain_table[20].txbb_iq_amplifygain = 		     -8;
+	priv->txbbgain_table[20].txbbgain_value=0x288000a2;
+	priv->txbbgain_table[21].txbb_iq_amplifygain = 		     -9;
+	priv->txbbgain_table[21].txbbgain_value=0x26000098;
+	priv->txbbgain_table[22].txbb_iq_amplifygain = 		     -10;
+	priv->txbbgain_table[22].txbbgain_value=0x24000090;
+	priv->txbbgain_table[23].txbb_iq_amplifygain = 		     -11;
+	priv->txbbgain_table[23].txbbgain_value=0x22000088;
+	priv->txbbgain_table[24].txbb_iq_amplifygain = 		     -12;
+	priv->txbbgain_table[24].txbbgain_value=0x20000080;
+	priv->txbbgain_table[25].txbb_iq_amplifygain = 		     -13;
+	priv->txbbgain_table[25].txbbgain_value=0x1a00006c;
+	priv->txbbgain_table[26].txbb_iq_amplifygain = 		     -14;
+	priv->txbbgain_table[26].txbbgain_value=0x1c800072;
+	priv->txbbgain_table[27].txbb_iq_amplifygain = 		     -15;
+	priv->txbbgain_table[27].txbbgain_value=0x18000060;
+	priv->txbbgain_table[28].txbb_iq_amplifygain = 		     -16;
+	priv->txbbgain_table[28].txbbgain_value=0x19800066;
+	priv->txbbgain_table[29].txbb_iq_amplifygain = 		     -17;
+	priv->txbbgain_table[29].txbbgain_value=0x15800056;
+	priv->txbbgain_table[30].txbb_iq_amplifygain = 		     -18;
+	priv->txbbgain_table[30].txbbgain_value=0x26c0005b;
+	priv->txbbgain_table[31].txbb_iq_amplifygain = 		     -19;
+	priv->txbbgain_table[31].txbbgain_value=0x14400051;
+	priv->txbbgain_table[32].txbb_iq_amplifygain = 		     -20;
+	priv->txbbgain_table[32].txbbgain_value=0x24400051;
+	priv->txbbgain_table[33].txbb_iq_amplifygain = 		     -21;
+	priv->txbbgain_table[33].txbbgain_value=0x1300004c;
+	priv->txbbgain_table[34].txbb_iq_amplifygain = 		     -22;
+	priv->txbbgain_table[34].txbbgain_value=0x12000048;
+	priv->txbbgain_table[35].txbb_iq_amplifygain = 		     -23;
+	priv->txbbgain_table[35].txbbgain_value=0x11000044;
+	priv->txbbgain_table[36].txbb_iq_amplifygain = 		     -24;
+	priv->txbbgain_table[36].txbbgain_value=0x10000040;
+
+	//ccktxbb_valuearray[0] is 0xA22 [1] is 0xA24 ...[7] is 0xA29
+	//This Table is for CH1~CH13
+	priv->cck_txbbgain_table[0].ccktxbb_valuearray[0] = 0x36;
+	priv->cck_txbbgain_table[0].ccktxbb_valuearray[1] = 0x35;
+	priv->cck_txbbgain_table[0].ccktxbb_valuearray[2] = 0x2e;
+	priv->cck_txbbgain_table[0].ccktxbb_valuearray[3] = 0x25;
+	priv->cck_txbbgain_table[0].ccktxbb_valuearray[4] = 0x1c;
+	priv->cck_txbbgain_table[0].ccktxbb_valuearray[5] = 0x12;
+	priv->cck_txbbgain_table[0].ccktxbb_valuearray[6] = 0x09;
+	priv->cck_txbbgain_table[0].ccktxbb_valuearray[7] = 0x04;
+
+	priv->cck_txbbgain_table[1].ccktxbb_valuearray[0] = 0x33;
+	priv->cck_txbbgain_table[1].ccktxbb_valuearray[1] = 0x32;
+	priv->cck_txbbgain_table[1].ccktxbb_valuearray[2] = 0x2b;
+	priv->cck_txbbgain_table[1].ccktxbb_valuearray[3] = 0x23;
+	priv->cck_txbbgain_table[1].ccktxbb_valuearray[4] = 0x1a;
+	priv->cck_txbbgain_table[1].ccktxbb_valuearray[5] = 0x11;
+	priv->cck_txbbgain_table[1].ccktxbb_valuearray[6] = 0x08;
+	priv->cck_txbbgain_table[1].ccktxbb_valuearray[7] = 0x04;
+
+	priv->cck_txbbgain_table[2].ccktxbb_valuearray[0] = 0x30;
+	priv->cck_txbbgain_table[2].ccktxbb_valuearray[1] = 0x2f;
+	priv->cck_txbbgain_table[2].ccktxbb_valuearray[2] = 0x29;
+	priv->cck_txbbgain_table[2].ccktxbb_valuearray[3] = 0x21;
+	priv->cck_txbbgain_table[2].ccktxbb_valuearray[4] = 0x19;
+	priv->cck_txbbgain_table[2].ccktxbb_valuearray[5] = 0x10;
+	priv->cck_txbbgain_table[2].ccktxbb_valuearray[6] = 0x08;
+	priv->cck_txbbgain_table[2].ccktxbb_valuearray[7] = 0x03;
+
+	priv->cck_txbbgain_table[3].ccktxbb_valuearray[0] = 0x2d;
+	priv->cck_txbbgain_table[3].ccktxbb_valuearray[1] = 0x2d;
+	priv->cck_txbbgain_table[3].ccktxbb_valuearray[2] = 0x27;
+	priv->cck_txbbgain_table[3].ccktxbb_valuearray[3] = 0x1f;
+	priv->cck_txbbgain_table[3].ccktxbb_valuearray[4] = 0x18;
+	priv->cck_txbbgain_table[3].ccktxbb_valuearray[5] = 0x0f;
+	priv->cck_txbbgain_table[3].ccktxbb_valuearray[6] = 0x08;
+	priv->cck_txbbgain_table[3].ccktxbb_valuearray[7] = 0x03;
+
+	priv->cck_txbbgain_table[4].ccktxbb_valuearray[0] = 0x2b;
+	priv->cck_txbbgain_table[4].ccktxbb_valuearray[1] = 0x2a;
+	priv->cck_txbbgain_table[4].ccktxbb_valuearray[2] = 0x25;
+	priv->cck_txbbgain_table[4].ccktxbb_valuearray[3] = 0x1e;
+	priv->cck_txbbgain_table[4].ccktxbb_valuearray[4] = 0x16;
+	priv->cck_txbbgain_table[4].ccktxbb_valuearray[5] = 0x0e;
+	priv->cck_txbbgain_table[4].ccktxbb_valuearray[6] = 0x07;
+	priv->cck_txbbgain_table[4].ccktxbb_valuearray[7] = 0x03;
+
+	priv->cck_txbbgain_table[5].ccktxbb_valuearray[0] = 0x28;
+	priv->cck_txbbgain_table[5].ccktxbb_valuearray[1] = 0x28;
+	priv->cck_txbbgain_table[5].ccktxbb_valuearray[2] = 0x22;
+	priv->cck_txbbgain_table[5].ccktxbb_valuearray[3] = 0x1c;
+	priv->cck_txbbgain_table[5].ccktxbb_valuearray[4] = 0x15;
+	priv->cck_txbbgain_table[5].ccktxbb_valuearray[5] = 0x0d;
+	priv->cck_txbbgain_table[5].ccktxbb_valuearray[6] = 0x07;
+	priv->cck_txbbgain_table[5].ccktxbb_valuearray[7] = 0x03;
+
+	priv->cck_txbbgain_table[6].ccktxbb_valuearray[0] = 0x26;
+	priv->cck_txbbgain_table[6].ccktxbb_valuearray[1] = 0x25;
+	priv->cck_txbbgain_table[6].ccktxbb_valuearray[2] = 0x21;
+	priv->cck_txbbgain_table[6].ccktxbb_valuearray[3] = 0x1b;
+	priv->cck_txbbgain_table[6].ccktxbb_valuearray[4] = 0x14;
+	priv->cck_txbbgain_table[6].ccktxbb_valuearray[5] = 0x0d;
+	priv->cck_txbbgain_table[6].ccktxbb_valuearray[6] = 0x06;
+	priv->cck_txbbgain_table[6].ccktxbb_valuearray[7] = 0x03;
+
+	priv->cck_txbbgain_table[7].ccktxbb_valuearray[0] = 0x24;
+	priv->cck_txbbgain_table[7].ccktxbb_valuearray[1] = 0x23;
+	priv->cck_txbbgain_table[7].ccktxbb_valuearray[2] = 0x1f;
+	priv->cck_txbbgain_table[7].ccktxbb_valuearray[3] = 0x19;
+	priv->cck_txbbgain_table[7].ccktxbb_valuearray[4] = 0x13;
+	priv->cck_txbbgain_table[7].ccktxbb_valuearray[5] = 0x0c;
+	priv->cck_txbbgain_table[7].ccktxbb_valuearray[6] = 0x06;
+	priv->cck_txbbgain_table[7].ccktxbb_valuearray[7] = 0x03;
+
+	priv->cck_txbbgain_table[8].ccktxbb_valuearray[0] = 0x22;
+	priv->cck_txbbgain_table[8].ccktxbb_valuearray[1] = 0x21;
+	priv->cck_txbbgain_table[8].ccktxbb_valuearray[2] = 0x1d;
+	priv->cck_txbbgain_table[8].ccktxbb_valuearray[3] = 0x18;
+	priv->cck_txbbgain_table[8].ccktxbb_valuearray[4] = 0x11;
+	priv->cck_txbbgain_table[8].ccktxbb_valuearray[5] = 0x0b;
+	priv->cck_txbbgain_table[8].ccktxbb_valuearray[6] = 0x06;
+	priv->cck_txbbgain_table[8].ccktxbb_valuearray[7] = 0x02;
+
+	priv->cck_txbbgain_table[9].ccktxbb_valuearray[0] = 0x20;
+	priv->cck_txbbgain_table[9].ccktxbb_valuearray[1] = 0x20;
+	priv->cck_txbbgain_table[9].ccktxbb_valuearray[2] = 0x1b;
+	priv->cck_txbbgain_table[9].ccktxbb_valuearray[3] = 0x16;
+	priv->cck_txbbgain_table[9].ccktxbb_valuearray[4] = 0x11;
+	priv->cck_txbbgain_table[9].ccktxbb_valuearray[5] = 0x08;
+	priv->cck_txbbgain_table[9].ccktxbb_valuearray[6] = 0x05;
+	priv->cck_txbbgain_table[9].ccktxbb_valuearray[7] = 0x02;
+
+	priv->cck_txbbgain_table[10].ccktxbb_valuearray[0] = 0x1f;
+	priv->cck_txbbgain_table[10].ccktxbb_valuearray[1] = 0x1e;
+	priv->cck_txbbgain_table[10].ccktxbb_valuearray[2] = 0x1a;
+	priv->cck_txbbgain_table[10].ccktxbb_valuearray[3] = 0x15;
+	priv->cck_txbbgain_table[10].ccktxbb_valuearray[4] = 0x10;
+	priv->cck_txbbgain_table[10].ccktxbb_valuearray[5] = 0x0a;
+	priv->cck_txbbgain_table[10].ccktxbb_valuearray[6] = 0x05;
+	priv->cck_txbbgain_table[10].ccktxbb_valuearray[7] = 0x02;
+
+	priv->cck_txbbgain_table[11].ccktxbb_valuearray[0] = 0x1d;
+	priv->cck_txbbgain_table[11].ccktxbb_valuearray[1] = 0x1c;
+	priv->cck_txbbgain_table[11].ccktxbb_valuearray[2] = 0x18;
+	priv->cck_txbbgain_table[11].ccktxbb_valuearray[3] = 0x14;
+	priv->cck_txbbgain_table[11].ccktxbb_valuearray[4] = 0x0f;
+	priv->cck_txbbgain_table[11].ccktxbb_valuearray[5] = 0x0a;
+	priv->cck_txbbgain_table[11].ccktxbb_valuearray[6] = 0x05;
+	priv->cck_txbbgain_table[11].ccktxbb_valuearray[7] = 0x02;
+
+	priv->cck_txbbgain_table[12].ccktxbb_valuearray[0] = 0x1b;
+	priv->cck_txbbgain_table[12].ccktxbb_valuearray[1] = 0x1a;
+	priv->cck_txbbgain_table[12].ccktxbb_valuearray[2] = 0x17;
+	priv->cck_txbbgain_table[12].ccktxbb_valuearray[3] = 0x13;
+	priv->cck_txbbgain_table[12].ccktxbb_valuearray[4] = 0x0e;
+	priv->cck_txbbgain_table[12].ccktxbb_valuearray[5] = 0x09;
+	priv->cck_txbbgain_table[12].ccktxbb_valuearray[6] = 0x04;
+	priv->cck_txbbgain_table[12].ccktxbb_valuearray[7] = 0x02;
+
+	priv->cck_txbbgain_table[13].ccktxbb_valuearray[0] = 0x1a;
+	priv->cck_txbbgain_table[13].ccktxbb_valuearray[1] = 0x19;
+	priv->cck_txbbgain_table[13].ccktxbb_valuearray[2] = 0x16;
+	priv->cck_txbbgain_table[13].ccktxbb_valuearray[3] = 0x12;
+	priv->cck_txbbgain_table[13].ccktxbb_valuearray[4] = 0x0d;
+	priv->cck_txbbgain_table[13].ccktxbb_valuearray[5] = 0x09;
+	priv->cck_txbbgain_table[13].ccktxbb_valuearray[6] = 0x04;
+	priv->cck_txbbgain_table[13].ccktxbb_valuearray[7] = 0x02;
+
+	priv->cck_txbbgain_table[14].ccktxbb_valuearray[0] = 0x18;
+	priv->cck_txbbgain_table[14].ccktxbb_valuearray[1] = 0x17;
+	priv->cck_txbbgain_table[14].ccktxbb_valuearray[2] = 0x15;
+	priv->cck_txbbgain_table[14].ccktxbb_valuearray[3] = 0x11;
+	priv->cck_txbbgain_table[14].ccktxbb_valuearray[4] = 0x0c;
+	priv->cck_txbbgain_table[14].ccktxbb_valuearray[5] = 0x08;
+	priv->cck_txbbgain_table[14].ccktxbb_valuearray[6] = 0x04;
+	priv->cck_txbbgain_table[14].ccktxbb_valuearray[7] = 0x02;
+
+	priv->cck_txbbgain_table[15].ccktxbb_valuearray[0] = 0x17;
+	priv->cck_txbbgain_table[15].ccktxbb_valuearray[1] = 0x16;
+	priv->cck_txbbgain_table[15].ccktxbb_valuearray[2] = 0x13;
+	priv->cck_txbbgain_table[15].ccktxbb_valuearray[3] = 0x10;
+	priv->cck_txbbgain_table[15].ccktxbb_valuearray[4] = 0x0c;
+	priv->cck_txbbgain_table[15].ccktxbb_valuearray[5] = 0x08;
+	priv->cck_txbbgain_table[15].ccktxbb_valuearray[6] = 0x04;
+	priv->cck_txbbgain_table[15].ccktxbb_valuearray[7] = 0x02;
+
+	priv->cck_txbbgain_table[16].ccktxbb_valuearray[0] = 0x16;
+	priv->cck_txbbgain_table[16].ccktxbb_valuearray[1] = 0x15;
+	priv->cck_txbbgain_table[16].ccktxbb_valuearray[2] = 0x12;
+	priv->cck_txbbgain_table[16].ccktxbb_valuearray[3] = 0x0f;
+	priv->cck_txbbgain_table[16].ccktxbb_valuearray[4] = 0x0b;
+	priv->cck_txbbgain_table[16].ccktxbb_valuearray[5] = 0x07;
+	priv->cck_txbbgain_table[16].ccktxbb_valuearray[6] = 0x04;
+	priv->cck_txbbgain_table[16].ccktxbb_valuearray[7] = 0x01;
+
+	priv->cck_txbbgain_table[17].ccktxbb_valuearray[0] = 0x14;
+	priv->cck_txbbgain_table[17].ccktxbb_valuearray[1] = 0x14;
+	priv->cck_txbbgain_table[17].ccktxbb_valuearray[2] = 0x11;
+	priv->cck_txbbgain_table[17].ccktxbb_valuearray[3] = 0x0e;
+	priv->cck_txbbgain_table[17].ccktxbb_valuearray[4] = 0x0b;
+	priv->cck_txbbgain_table[17].ccktxbb_valuearray[5] = 0x07;
+	priv->cck_txbbgain_table[17].ccktxbb_valuearray[6] = 0x03;
+	priv->cck_txbbgain_table[17].ccktxbb_valuearray[7] = 0x02;
+
+	priv->cck_txbbgain_table[18].ccktxbb_valuearray[0] = 0x13;
+	priv->cck_txbbgain_table[18].ccktxbb_valuearray[1] = 0x13;
+	priv->cck_txbbgain_table[18].ccktxbb_valuearray[2] = 0x10;
+	priv->cck_txbbgain_table[18].ccktxbb_valuearray[3] = 0x0d;
+	priv->cck_txbbgain_table[18].ccktxbb_valuearray[4] = 0x0a;
+	priv->cck_txbbgain_table[18].ccktxbb_valuearray[5] = 0x06;
+	priv->cck_txbbgain_table[18].ccktxbb_valuearray[6] = 0x03;
+	priv->cck_txbbgain_table[18].ccktxbb_valuearray[7] = 0x01;
+
+	priv->cck_txbbgain_table[19].ccktxbb_valuearray[0] = 0x12;
+	priv->cck_txbbgain_table[19].ccktxbb_valuearray[1] = 0x12;
+	priv->cck_txbbgain_table[19].ccktxbb_valuearray[2] = 0x0f;
+	priv->cck_txbbgain_table[19].ccktxbb_valuearray[3] = 0x0c;
+	priv->cck_txbbgain_table[19].ccktxbb_valuearray[4] = 0x09;
+	priv->cck_txbbgain_table[19].ccktxbb_valuearray[5] = 0x06;
+	priv->cck_txbbgain_table[19].ccktxbb_valuearray[6] = 0x03;
+	priv->cck_txbbgain_table[19].ccktxbb_valuearray[7] = 0x01;
+
+	priv->cck_txbbgain_table[20].ccktxbb_valuearray[0] = 0x11;
+	priv->cck_txbbgain_table[20].ccktxbb_valuearray[1] = 0x11;
+	priv->cck_txbbgain_table[20].ccktxbb_valuearray[2] = 0x0f;
+	priv->cck_txbbgain_table[20].ccktxbb_valuearray[3] = 0x0c;
+	priv->cck_txbbgain_table[20].ccktxbb_valuearray[4] = 0x09;
+	priv->cck_txbbgain_table[20].ccktxbb_valuearray[5] = 0x06;
+	priv->cck_txbbgain_table[20].ccktxbb_valuearray[6] = 0x03;
+	priv->cck_txbbgain_table[20].ccktxbb_valuearray[7] = 0x01;
+
+	priv->cck_txbbgain_table[21].ccktxbb_valuearray[0] = 0x10;
+	priv->cck_txbbgain_table[21].ccktxbb_valuearray[1] = 0x10;
+	priv->cck_txbbgain_table[21].ccktxbb_valuearray[2] = 0x0e;
+	priv->cck_txbbgain_table[21].ccktxbb_valuearray[3] = 0x0b;
+	priv->cck_txbbgain_table[21].ccktxbb_valuearray[4] = 0x08;
+	priv->cck_txbbgain_table[21].ccktxbb_valuearray[5] = 0x05;
+	priv->cck_txbbgain_table[21].ccktxbb_valuearray[6] = 0x03;
+	priv->cck_txbbgain_table[21].ccktxbb_valuearray[7] = 0x01;
+
+	priv->cck_txbbgain_table[22].ccktxbb_valuearray[0] = 0x0f;
+	priv->cck_txbbgain_table[22].ccktxbb_valuearray[1] = 0x0f;
+	priv->cck_txbbgain_table[22].ccktxbb_valuearray[2] = 0x0d;
+	priv->cck_txbbgain_table[22].ccktxbb_valuearray[3] = 0x0b;
+	priv->cck_txbbgain_table[22].ccktxbb_valuearray[4] = 0x08;
+	priv->cck_txbbgain_table[22].ccktxbb_valuearray[5] = 0x05;
+	priv->cck_txbbgain_table[22].ccktxbb_valuearray[6] = 0x03;
+	priv->cck_txbbgain_table[22].ccktxbb_valuearray[7] = 0x01;
+
+	//ccktxbb_valuearray[0] is 0xA22 [1] is 0xA24 ...[7] is 0xA29
+	//This Table is for CH14
+	priv->cck_txbbgain_ch14_table[0].ccktxbb_valuearray[0] = 0x36;
+	priv->cck_txbbgain_ch14_table[0].ccktxbb_valuearray[1] = 0x35;
+	priv->cck_txbbgain_ch14_table[0].ccktxbb_valuearray[2] = 0x2e;
+	priv->cck_txbbgain_ch14_table[0].ccktxbb_valuearray[3] = 0x1b;
+	priv->cck_txbbgain_ch14_table[0].ccktxbb_valuearray[4] = 0x00;
+	priv->cck_txbbgain_ch14_table[0].ccktxbb_valuearray[5] = 0x00;
+	priv->cck_txbbgain_ch14_table[0].ccktxbb_valuearray[6] = 0x00;
+	priv->cck_txbbgain_ch14_table[0].ccktxbb_valuearray[7] = 0x00;
+
+	priv->cck_txbbgain_ch14_table[1].ccktxbb_valuearray[0] = 0x33;
+	priv->cck_txbbgain_ch14_table[1].ccktxbb_valuearray[1] = 0x32;
+	priv->cck_txbbgain_ch14_table[1].ccktxbb_valuearray[2] = 0x2b;
+	priv->cck_txbbgain_ch14_table[1].ccktxbb_valuearray[3] = 0x19;
+	priv->cck_txbbgain_ch14_table[1].ccktxbb_valuearray[4] = 0x00;
+	priv->cck_txbbgain_ch14_table[1].ccktxbb_valuearray[5] = 0x00;
+	priv->cck_txbbgain_ch14_table[1].ccktxbb_valuearray[6] = 0x00;
+	priv->cck_txbbgain_ch14_table[1].ccktxbb_valuearray[7] = 0x00;
+
+	priv->cck_txbbgain_ch14_table[2].ccktxbb_valuearray[0] = 0x30;
+	priv->cck_txbbgain_ch14_table[2].ccktxbb_valuearray[1] = 0x2f;
+	priv->cck_txbbgain_ch14_table[2].ccktxbb_valuearray[2] = 0x29;
+	priv->cck_txbbgain_ch14_table[2].ccktxbb_valuearray[3] = 0x18;
+	priv->cck_txbbgain_ch14_table[2].ccktxbb_valuearray[4] = 0x00;
+	priv->cck_txbbgain_ch14_table[2].ccktxbb_valuearray[5] = 0x00;
+	priv->cck_txbbgain_ch14_table[2].ccktxbb_valuearray[6] = 0x00;
+	priv->cck_txbbgain_ch14_table[2].ccktxbb_valuearray[7] = 0x00;
+
+	priv->cck_txbbgain_ch14_table[3].ccktxbb_valuearray[0] = 0x2d;
+	priv->cck_txbbgain_ch14_table[3].ccktxbb_valuearray[1] = 0x2d;
+	priv->cck_txbbgain_ch14_table[3].ccktxbb_valuearray[2] = 0x27;
+	priv->cck_txbbgain_ch14_table[3].ccktxbb_valuearray[3] = 0x17;
+	priv->cck_txbbgain_ch14_table[3].ccktxbb_valuearray[4] = 0x00;
+	priv->cck_txbbgain_ch14_table[3].ccktxbb_valuearray[5] = 0x00;
+	priv->cck_txbbgain_ch14_table[3].ccktxbb_valuearray[6] = 0x00;
+	priv->cck_txbbgain_ch14_table[3].ccktxbb_valuearray[7] = 0x00;
+
+	priv->cck_txbbgain_ch14_table[4].ccktxbb_valuearray[0] = 0x2b;
+	priv->cck_txbbgain_ch14_table[4].ccktxbb_valuearray[1] = 0x2a;
+	priv->cck_txbbgain_ch14_table[4].ccktxbb_valuearray[2] = 0x25;
+	priv->cck_txbbgain_ch14_table[4].ccktxbb_valuearray[3] = 0x15;
+	priv->cck_txbbgain_ch14_table[4].ccktxbb_valuearray[4] = 0x00;
+	priv->cck_txbbgain_ch14_table[4].ccktxbb_valuearray[5] = 0x00;
+	priv->cck_txbbgain_ch14_table[4].ccktxbb_valuearray[6] = 0x00;
+	priv->cck_txbbgain_ch14_table[4].ccktxbb_valuearray[7] = 0x00;
+
+	priv->cck_txbbgain_ch14_table[5].ccktxbb_valuearray[0] = 0x28;
+	priv->cck_txbbgain_ch14_table[5].ccktxbb_valuearray[1] = 0x28;
+	priv->cck_txbbgain_ch14_table[5].ccktxbb_valuearray[2] = 0x22;
+	priv->cck_txbbgain_ch14_table[5].ccktxbb_valuearray[3] = 0x14;
+	priv->cck_txbbgain_ch14_table[5].ccktxbb_valuearray[4] = 0x00;
+	priv->cck_txbbgain_ch14_table[5].ccktxbb_valuearray[5] = 0x00;
+	priv->cck_txbbgain_ch14_table[5].ccktxbb_valuearray[6] = 0x00;
+	priv->cck_txbbgain_ch14_table[5].ccktxbb_valuearray[7] = 0x00;
+
+	priv->cck_txbbgain_ch14_table[6].ccktxbb_valuearray[0] = 0x26;
+	priv->cck_txbbgain_ch14_table[6].ccktxbb_valuearray[1] = 0x25;
+	priv->cck_txbbgain_ch14_table[6].ccktxbb_valuearray[2] = 0x21;
+	priv->cck_txbbgain_ch14_table[6].ccktxbb_valuearray[3] = 0x13;
+	priv->cck_txbbgain_ch14_table[6].ccktxbb_valuearray[4] = 0x00;
+	priv->cck_txbbgain_ch14_table[6].ccktxbb_valuearray[5] = 0x00;
+	priv->cck_txbbgain_ch14_table[6].ccktxbb_valuearray[6] = 0x00;
+	priv->cck_txbbgain_ch14_table[6].ccktxbb_valuearray[7] = 0x00;
+
+	priv->cck_txbbgain_ch14_table[7].ccktxbb_valuearray[0] = 0x24;
+	priv->cck_txbbgain_ch14_table[7].ccktxbb_valuearray[1] = 0x23;
+	priv->cck_txbbgain_ch14_table[7].ccktxbb_valuearray[2] = 0x1f;
+	priv->cck_txbbgain_ch14_table[7].ccktxbb_valuearray[3] = 0x12;
+	priv->cck_txbbgain_ch14_table[7].ccktxbb_valuearray[4] = 0x00;
+	priv->cck_txbbgain_ch14_table[7].ccktxbb_valuearray[5] = 0x00;
+	priv->cck_txbbgain_ch14_table[7].ccktxbb_valuearray[6] = 0x00;
+	priv->cck_txbbgain_ch14_table[7].ccktxbb_valuearray[7] = 0x00;
+
+	priv->cck_txbbgain_ch14_table[8].ccktxbb_valuearray[0] = 0x22;
+	priv->cck_txbbgain_ch14_table[8].ccktxbb_valuearray[1] = 0x21;
+	priv->cck_txbbgain_ch14_table[8].ccktxbb_valuearray[2] = 0x1d;
+	priv->cck_txbbgain_ch14_table[8].ccktxbb_valuearray[3] = 0x11;
+	priv->cck_txbbgain_ch14_table[8].ccktxbb_valuearray[4] = 0x00;
+	priv->cck_txbbgain_ch14_table[8].ccktxbb_valuearray[5] = 0x00;
+	priv->cck_txbbgain_ch14_table[8].ccktxbb_valuearray[6] = 0x00;
+	priv->cck_txbbgain_ch14_table[8].ccktxbb_valuearray[7] = 0x00;
+
+	priv->cck_txbbgain_ch14_table[9].ccktxbb_valuearray[0] = 0x20;
+	priv->cck_txbbgain_ch14_table[9].ccktxbb_valuearray[1] = 0x20;
+	priv->cck_txbbgain_ch14_table[9].ccktxbb_valuearray[2] = 0x1b;
+	priv->cck_txbbgain_ch14_table[9].ccktxbb_valuearray[3] = 0x10;
+	priv->cck_txbbgain_ch14_table[9].ccktxbb_valuearray[4] = 0x00;
+	priv->cck_txbbgain_ch14_table[9].ccktxbb_valuearray[5] = 0x00;
+	priv->cck_txbbgain_ch14_table[9].ccktxbb_valuearray[6] = 0x00;
+	priv->cck_txbbgain_ch14_table[9].ccktxbb_valuearray[7] = 0x00;
+
+	priv->cck_txbbgain_ch14_table[10].ccktxbb_valuearray[0] = 0x1f;
+	priv->cck_txbbgain_ch14_table[10].ccktxbb_valuearray[1] = 0x1e;
+	priv->cck_txbbgain_ch14_table[10].ccktxbb_valuearray[2] = 0x1a;
+	priv->cck_txbbgain_ch14_table[10].ccktxbb_valuearray[3] = 0x0f;
+	priv->cck_txbbgain_ch14_table[10].ccktxbb_valuearray[4] = 0x00;
+	priv->cck_txbbgain_ch14_table[10].ccktxbb_valuearray[5] = 0x00;
+	priv->cck_txbbgain_ch14_table[10].ccktxbb_valuearray[6] = 0x00;
+	priv->cck_txbbgain_ch14_table[10].ccktxbb_valuearray[7] = 0x00;
+
+	priv->cck_txbbgain_ch14_table[11].ccktxbb_valuearray[0] = 0x1d;
+	priv->cck_txbbgain_ch14_table[11].ccktxbb_valuearray[1] = 0x1c;
+	priv->cck_txbbgain_ch14_table[11].ccktxbb_valuearray[2] = 0x18;
+	priv->cck_txbbgain_ch14_table[11].ccktxbb_valuearray[3] = 0x0e;
+	priv->cck_txbbgain_ch14_table[11].ccktxbb_valuearray[4] = 0x00;
+	priv->cck_txbbgain_ch14_table[11].ccktxbb_valuearray[5] = 0x00;
+	priv->cck_txbbgain_ch14_table[11].ccktxbb_valuearray[6] = 0x00;
+	priv->cck_txbbgain_ch14_table[11].ccktxbb_valuearray[7] = 0x00;
+
+	priv->cck_txbbgain_ch14_table[12].ccktxbb_valuearray[0] = 0x1b;
+	priv->cck_txbbgain_ch14_table[12].ccktxbb_valuearray[1] = 0x1a;
+	priv->cck_txbbgain_ch14_table[12].ccktxbb_valuearray[2] = 0x17;
+	priv->cck_txbbgain_ch14_table[12].ccktxbb_valuearray[3] = 0x0e;
+	priv->cck_txbbgain_ch14_table[12].ccktxbb_valuearray[4] = 0x00;
+	priv->cck_txbbgain_ch14_table[12].ccktxbb_valuearray[5] = 0x00;
+	priv->cck_txbbgain_ch14_table[12].ccktxbb_valuearray[6] = 0x00;
+	priv->cck_txbbgain_ch14_table[12].ccktxbb_valuearray[7] = 0x00;
+
+	priv->cck_txbbgain_ch14_table[13].ccktxbb_valuearray[0] = 0x1a;
+	priv->cck_txbbgain_ch14_table[13].ccktxbb_valuearray[1] = 0x19;
+	priv->cck_txbbgain_ch14_table[13].ccktxbb_valuearray[2] = 0x16;
+	priv->cck_txbbgain_ch14_table[13].ccktxbb_valuearray[3] = 0x0d;
+	priv->cck_txbbgain_ch14_table[13].ccktxbb_valuearray[4] = 0x00;
+	priv->cck_txbbgain_ch14_table[13].ccktxbb_valuearray[5] = 0x00;
+	priv->cck_txbbgain_ch14_table[13].ccktxbb_valuearray[6] = 0x00;
+	priv->cck_txbbgain_ch14_table[13].ccktxbb_valuearray[7] = 0x00;
+
+	priv->cck_txbbgain_ch14_table[14].ccktxbb_valuearray[0] = 0x18;
+	priv->cck_txbbgain_ch14_table[14].ccktxbb_valuearray[1] = 0x17;
+	priv->cck_txbbgain_ch14_table[14].ccktxbb_valuearray[2] = 0x15;
+	priv->cck_txbbgain_ch14_table[14].ccktxbb_valuearray[3] = 0x0c;
+	priv->cck_txbbgain_ch14_table[14].ccktxbb_valuearray[4] = 0x00;
+	priv->cck_txbbgain_ch14_table[14].ccktxbb_valuearray[5] = 0x00;
+	priv->cck_txbbgain_ch14_table[14].ccktxbb_valuearray[6] = 0x00;
+	priv->cck_txbbgain_ch14_table[14].ccktxbb_valuearray[7] = 0x00;
+
+	priv->cck_txbbgain_ch14_table[15].ccktxbb_valuearray[0] = 0x17;
+	priv->cck_txbbgain_ch14_table[15].ccktxbb_valuearray[1] = 0x16;
+	priv->cck_txbbgain_ch14_table[15].ccktxbb_valuearray[2] = 0x13;
+	priv->cck_txbbgain_ch14_table[15].ccktxbb_valuearray[3] = 0x0b;
+	priv->cck_txbbgain_ch14_table[15].ccktxbb_valuearray[4] = 0x00;
+	priv->cck_txbbgain_ch14_table[15].ccktxbb_valuearray[5] = 0x00;
+	priv->cck_txbbgain_ch14_table[15].ccktxbb_valuearray[6] = 0x00;
+	priv->cck_txbbgain_ch14_table[15].ccktxbb_valuearray[7] = 0x00;
+
+	priv->cck_txbbgain_ch14_table[16].ccktxbb_valuearray[0] = 0x16;
+	priv->cck_txbbgain_ch14_table[16].ccktxbb_valuearray[1] = 0x15;
+	priv->cck_txbbgain_ch14_table[16].ccktxbb_valuearray[2] = 0x12;
+	priv->cck_txbbgain_ch14_table[16].ccktxbb_valuearray[3] = 0x0b;
+	priv->cck_txbbgain_ch14_table[16].ccktxbb_valuearray[4] = 0x00;
+	priv->cck_txbbgain_ch14_table[16].ccktxbb_valuearray[5] = 0x00;
+	priv->cck_txbbgain_ch14_table[16].ccktxbb_valuearray[6] = 0x00;
+	priv->cck_txbbgain_ch14_table[16].ccktxbb_valuearray[7] = 0x00;
+
+	priv->cck_txbbgain_ch14_table[17].ccktxbb_valuearray[0] = 0x14;
+	priv->cck_txbbgain_ch14_table[17].ccktxbb_valuearray[1] = 0x14;
+	priv->cck_txbbgain_ch14_table[17].ccktxbb_valuearray[2] = 0x11;
+	priv->cck_txbbgain_ch14_table[17].ccktxbb_valuearray[3] = 0x0a;
+	priv->cck_txbbgain_ch14_table[17].ccktxbb_valuearray[4] = 0x00;
+	priv->cck_txbbgain_ch14_table[17].ccktxbb_valuearray[5] = 0x00;
+	priv->cck_txbbgain_ch14_table[17].ccktxbb_valuearray[6] = 0x00;
+	priv->cck_txbbgain_ch14_table[17].ccktxbb_valuearray[7] = 0x00;
+
+	priv->cck_txbbgain_ch14_table[18].ccktxbb_valuearray[0] = 0x13;
+	priv->cck_txbbgain_ch14_table[18].ccktxbb_valuearray[1] = 0x13;
+	priv->cck_txbbgain_ch14_table[18].ccktxbb_valuearray[2] = 0x10;
+	priv->cck_txbbgain_ch14_table[18].ccktxbb_valuearray[3] = 0x0a;
+	priv->cck_txbbgain_ch14_table[18].ccktxbb_valuearray[4] = 0x00;
+	priv->cck_txbbgain_ch14_table[18].ccktxbb_valuearray[5] = 0x00;
+	priv->cck_txbbgain_ch14_table[18].ccktxbb_valuearray[6] = 0x00;
+	priv->cck_txbbgain_ch14_table[18].ccktxbb_valuearray[7] = 0x00;
+
+	priv->cck_txbbgain_ch14_table[19].ccktxbb_valuearray[0] = 0x12;
+	priv->cck_txbbgain_ch14_table[19].ccktxbb_valuearray[1] = 0x12;
+	priv->cck_txbbgain_ch14_table[19].ccktxbb_valuearray[2] = 0x0f;
+	priv->cck_txbbgain_ch14_table[19].ccktxbb_valuearray[3] = 0x09;
+	priv->cck_txbbgain_ch14_table[19].ccktxbb_valuearray[4] = 0x00;
+	priv->cck_txbbgain_ch14_table[19].ccktxbb_valuearray[5] = 0x00;
+	priv->cck_txbbgain_ch14_table[19].ccktxbb_valuearray[6] = 0x00;
+	priv->cck_txbbgain_ch14_table[19].ccktxbb_valuearray[7] = 0x00;
+
+	priv->cck_txbbgain_ch14_table[20].ccktxbb_valuearray[0] = 0x11;
+	priv->cck_txbbgain_ch14_table[20].ccktxbb_valuearray[1] = 0x11;
+	priv->cck_txbbgain_ch14_table[20].ccktxbb_valuearray[2] = 0x0f;
+	priv->cck_txbbgain_ch14_table[20].ccktxbb_valuearray[3] = 0x09;
+	priv->cck_txbbgain_ch14_table[20].ccktxbb_valuearray[4] = 0x00;
+	priv->cck_txbbgain_ch14_table[20].ccktxbb_valuearray[5] = 0x00;
+	priv->cck_txbbgain_ch14_table[20].ccktxbb_valuearray[6] = 0x00;
+	priv->cck_txbbgain_ch14_table[20].ccktxbb_valuearray[7] = 0x00;
+
+	priv->cck_txbbgain_ch14_table[21].ccktxbb_valuearray[0] = 0x10;
+	priv->cck_txbbgain_ch14_table[21].ccktxbb_valuearray[1] = 0x10;
+	priv->cck_txbbgain_ch14_table[21].ccktxbb_valuearray[2] = 0x0e;
+	priv->cck_txbbgain_ch14_table[21].ccktxbb_valuearray[3] = 0x08;
+	priv->cck_txbbgain_ch14_table[21].ccktxbb_valuearray[4] = 0x00;
+	priv->cck_txbbgain_ch14_table[21].ccktxbb_valuearray[5] = 0x00;
+	priv->cck_txbbgain_ch14_table[21].ccktxbb_valuearray[6] = 0x00;
+	priv->cck_txbbgain_ch14_table[21].ccktxbb_valuearray[7] = 0x00;
+
+	priv->cck_txbbgain_ch14_table[22].ccktxbb_valuearray[0] = 0x0f;
+	priv->cck_txbbgain_ch14_table[22].ccktxbb_valuearray[1] = 0x0f;
+	priv->cck_txbbgain_ch14_table[22].ccktxbb_valuearray[2] = 0x0d;
+	priv->cck_txbbgain_ch14_table[22].ccktxbb_valuearray[3] = 0x08;
+	priv->cck_txbbgain_ch14_table[22].ccktxbb_valuearray[4] = 0x00;
+	priv->cck_txbbgain_ch14_table[22].ccktxbb_valuearray[5] = 0x00;
+	priv->cck_txbbgain_ch14_table[22].ccktxbb_valuearray[6] = 0x00;
+	priv->cck_txbbgain_ch14_table[22].ccktxbb_valuearray[7] = 0x00;
+
+	priv->btxpower_tracking = TRUE;
+	priv->txpower_count       = 0;
+	priv->btxpower_trackingInit = FALSE;
+
+}
+
+#ifndef RTL8192SU
+static void dm_InitializeTXPowerTracking_ThermalMeter(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	// Tx Power tracking by Theremal Meter require Firmware R/W 3-wire. This mechanism
+	// can be enabled only when Firmware R/W 3-wire is enabled. Otherwise, frequent r/w
+	// 3-wire by driver cause RF goes into wrong state.
+	if(priv->ieee80211->FwRWRF)
+		priv->btxpower_tracking = TRUE;
+	else
+		priv->btxpower_tracking = FALSE;
+	priv->txpower_count       = 0;
+	priv->btxpower_trackingInit = FALSE;
+}
+#endif
+
+void dm_initialize_txpower_tracking(struct net_device *dev)
+{
+#if (defined RTL8190P)
+	dm_InitializeTXPowerTracking_TSSI(dev);
+#elif (defined RTL8192SU)
+	// 2009/01/12 MH Enable for 92S series channel 1-14 CCK tx pwer setting for MP.
+	//
+	dm_InitializeTXPowerTracking_TSSI(dev);
+#else
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	if(priv->bDcut == TRUE)
+		dm_InitializeTXPowerTracking_TSSI(dev);
+	else
+		dm_InitializeTXPowerTracking_ThermalMeter(dev);
+#endif
+}// dm_InitializeTXPowerTracking
+
+
+static void dm_CheckTXPowerTracking_TSSI(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	static u32 tx_power_track_counter = 0;
+
+	if(!priv->btxpower_tracking)
+		return;
+	else
+	{
+	 	if((tx_power_track_counter % 30 == 0)&&(tx_power_track_counter != 0))
+	 	{
+	 		#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+				queue_delayed_work(priv->priv_wq,&priv->txpower_tracking_wq,0);
+			#else
+				#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+				schedule_task(&priv->txpower_tracking_wq);
+				#else
+				queue_work(priv->priv_wq,&priv->txpower_tracking_wq);
+				#endif
+			#endif
+	 	}
+		tx_power_track_counter++;
+	}
+
+}
+
+
+static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	static u8 	TM_Trigger=0;
+#if 0
+	u1Byte					i;
+	u4Byte tmpRegA;
+	for(i=0; i<50; i++)
+	{
+		tmpRegA = PHY_QueryRFReg(Adapter, RF90_PATH_A, 0x12, 0x078);	// 0x12: RF Reg[10:7]
+		PHY_SetRFReg(Adapter, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
+		//delay_us(100);
+		PHY_SetRFReg(Adapter, RF90_PATH_A, 0x02, bMask12Bits, 0x4f);
+		//delay_us(100);
+	}
+	DbgPrint("Trigger and readback ThermalMeter, write RF reg0x2 = 0x4d to 0x4f for 50 times\n");
+#else
+	//DbgPrint("dm_CheckTXPowerTracking() \n");
+	if(!priv->btxpower_tracking)
+		return;
+	else
+	{
+		if(priv->txpower_count  <= 2)
+		{
+			priv->txpower_count++;
+			return;
+		}
+	}
+
+	if(!TM_Trigger)
+	{
+		//Attention!! You have to wirte all 12bits data to RF, or it may cause RF to crash
+		//actually write reg0x02 bit1=0, then bit1=1.
+		//DbgPrint("Trigger ThermalMeter, write RF reg0x2 = 0x4d to 0x4f\n");
+#ifdef RTL8192SU
+		rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bRFRegOffsetMask, 0x4d);
+		rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bRFRegOffsetMask, 0x4f);
+		rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bRFRegOffsetMask, 0x4d);
+		rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bRFRegOffsetMask, 0x4f);
+#else
+		rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
+		rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4f);
+		rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
+		rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4f);
+#endif
+		TM_Trigger = 1;
+		return;
+	}
+	else
+	{
+		//DbgPrint("Schedule TxPowerTrackingWorkItem\n");
+		#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+			queue_delayed_work(priv->priv_wq,&priv->txpower_tracking_wq,0);
+		#else
+			#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+			schedule_task(&priv->txpower_tracking_wq);
+			#else
+			queue_work(priv->priv_wq,&priv->txpower_tracking_wq);
+			#endif
+		#endif
+		TM_Trigger = 0;
+	}
+#endif
+}
+
+
+static void dm_check_txpower_tracking(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	//static u32 tx_power_track_counter = 0;
+
+#ifdef  RTL8190P
+	dm_CheckTXPowerTracking_TSSI(dev);
+#else
+	if(priv->bDcut == TRUE)
+		dm_CheckTXPowerTracking_TSSI(dev);
+	else
+		dm_CheckTXPowerTracking_ThermalMeter(dev);
+#endif
+
+}	// dm_CheckTXPowerTracking
+
+
+static void dm_CCKTxPowerAdjust_TSSI(struct net_device *dev, bool  bInCH14)
+{
+	u32 TempVal;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	//Write 0xa22 0xa23
+	TempVal = 0;
+	if(!bInCH14){
+		//Write 0xa22 0xa23
+		TempVal = 	priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[0] +
+					(priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[1]<<8) ;
+
+		rtl8192_setBBreg(dev, rCCK0_TxFilter1,bMaskHWord, TempVal);
+		//Write 0xa24 ~ 0xa27
+		TempVal = 0;
+		TempVal = 	priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[2] +
+					(priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[3]<<8) +
+					(priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[4]<<16 )+
+					(priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[5]<<24);
+		rtl8192_setBBreg(dev, rCCK0_TxFilter2,bMaskDWord, TempVal);
+		//Write 0xa28  0xa29
+		TempVal = 0;
+		TempVal = 	priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[6] +
+					(priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[7]<<8) ;
+
+		rtl8192_setBBreg(dev, rCCK0_DebugPort,bMaskLWord, TempVal);
+	}
+	else
+	{
+		TempVal = 	priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[0] +
+					(priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[1]<<8) ;
+
+		rtl8192_setBBreg(dev, rCCK0_TxFilter1,bMaskHWord, TempVal);
+		//Write 0xa24 ~ 0xa27
+		TempVal = 0;
+		TempVal = 	priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[2] +
+					(priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[3]<<8) +
+					(priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[4]<<16 )+
+					(priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[5]<<24);
+		rtl8192_setBBreg(dev, rCCK0_TxFilter2,bMaskDWord, TempVal);
+		//Write 0xa28  0xa29
+		TempVal = 0;
+		TempVal = 	priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[6] +
+					(priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[7]<<8) ;
+
+		rtl8192_setBBreg(dev, rCCK0_DebugPort,bMaskLWord, TempVal);
+	}
+
+
+}
+
+static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev,	bool  bInCH14)
+{
+	u32 TempVal;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	TempVal = 0;
+	if(!bInCH14)
+	{
+		//Write 0xa22 0xa23
+		TempVal = 	CCKSwingTable_Ch1_Ch13[priv->CCK_index][0] +
+					(CCKSwingTable_Ch1_Ch13[priv->CCK_index][1]<<8) ;
+		rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskHWord, TempVal);
+		RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x = 0x%x\n",
+			rCCK0_TxFilter1, TempVal);
+		//Write 0xa24 ~ 0xa27
+		TempVal = 0;
+		TempVal = 	CCKSwingTable_Ch1_Ch13[priv->CCK_index][2] +
+					(CCKSwingTable_Ch1_Ch13[priv->CCK_index][3]<<8) +
+					(CCKSwingTable_Ch1_Ch13[priv->CCK_index][4]<<16 )+
+					(CCKSwingTable_Ch1_Ch13[priv->CCK_index][5]<<24);
+		rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, TempVal);
+		RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x = 0x%x\n",
+			rCCK0_TxFilter2, TempVal);
+		//Write 0xa28  0xa29
+		TempVal = 0;
+		TempVal = 	CCKSwingTable_Ch1_Ch13[priv->CCK_index][6] +
+					(CCKSwingTable_Ch1_Ch13[priv->CCK_index][7]<<8) ;
+
+		rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskLWord, TempVal);
+		RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x = 0x%x\n",
+			rCCK0_DebugPort, TempVal);
+	}
+	else
+	{
+//		priv->CCKTxPowerAdjustCntNotCh14++;	//cosa add for debug.
+		//Write 0xa22 0xa23
+		TempVal = 	CCKSwingTable_Ch14[priv->CCK_index][0] +
+					(CCKSwingTable_Ch14[priv->CCK_index][1]<<8) ;
+
+		rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskHWord, TempVal);
+		RT_TRACE(COMP_POWER_TRACKING, "CCK chnl 14, reg 0x%x = 0x%x\n",
+			rCCK0_TxFilter1, TempVal);
+		//Write 0xa24 ~ 0xa27
+		TempVal = 0;
+		TempVal = 	CCKSwingTable_Ch14[priv->CCK_index][2] +
+					(CCKSwingTable_Ch14[priv->CCK_index][3]<<8) +
+					(CCKSwingTable_Ch14[priv->CCK_index][4]<<16 )+
+					(CCKSwingTable_Ch14[priv->CCK_index][5]<<24);
+		rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, TempVal);
+		RT_TRACE(COMP_POWER_TRACKING, "CCK chnl 14, reg 0x%x = 0x%x\n",
+			rCCK0_TxFilter2, TempVal);
+		//Write 0xa28  0xa29
+		TempVal = 0;
+		TempVal = 	CCKSwingTable_Ch14[priv->CCK_index][6] +
+					(CCKSwingTable_Ch14[priv->CCK_index][7]<<8) ;
+
+		rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskLWord, TempVal);
+		RT_TRACE(COMP_POWER_TRACKING,"CCK chnl 14, reg 0x%x = 0x%x\n",
+			rCCK0_DebugPort, TempVal);
+	}
+}
+
+
+
+extern void dm_cck_txpower_adjust(
+	struct net_device *dev,
+	bool  binch14
+)
+{	// dm_CCKTxPowerAdjust
+
+	struct r8192_priv *priv = ieee80211_priv(dev);
+#ifdef RTL8190P
+	dm_CCKTxPowerAdjust_TSSI(dev, binch14);
+#else
+	if(priv->bDcut == TRUE)
+		dm_CCKTxPowerAdjust_TSSI(dev, binch14);
+	else
+		dm_CCKTxPowerAdjust_ThermalMeter(dev, binch14);
+#endif
+}
+
+
+#ifndef  RTL8192U
+static void dm_txpower_reset_recovery(
+	struct net_device *dev
+)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	RT_TRACE(COMP_POWER_TRACKING, "Start Reset Recovery ==>\n");
+	rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex].txbbgain_value);
+	RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery: Fill in 0xc80 is %08x\n",priv->txbbgain_table[priv->rfa_txpowertrackingindex].txbbgain_value);
+	RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery: Fill in RFA_txPowerTrackingIndex is %x\n",priv->rfa_txpowertrackingindex);
+	RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery : RF A I/Q Amplify Gain is %ld\n",priv->txbbgain_table[priv->rfa_txpowertrackingindex].txbb_iq_amplifygain);
+	RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery: CCK Attenuation is %d dB\n",priv->cck_present_attentuation);
+	dm_cck_txpower_adjust(dev,priv->bcck_in_ch14);
+
+	rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex].txbbgain_value);
+	RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery: Fill in 0xc90 is %08x\n",priv->txbbgain_table[priv->rfc_txpowertrackingindex].txbbgain_value);
+	RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery: Fill in RFC_txPowerTrackingIndex is %x\n",priv->rfc_txpowertrackingindex);
+	RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery : RF C I/Q Amplify Gain is %ld\n",priv->txbbgain_table[priv->rfc_txpowertrackingindex].txbb_iq_amplifygain);
+
+}	// dm_TXPowerResetRecovery
+
+extern void dm_restore_dynamic_mechanism_state(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u32 	reg_ratr = priv->rate_adaptive.last_ratr;
+
+	if(!priv->up)
+	{
+		RT_TRACE(COMP_RATE, "<---- dm_restore_dynamic_mechanism_state(): driver is going to unload\n");
+		return;
+	}
+
+	//
+	// Restore previous state for rate adaptive
+	//
+	if(priv->rate_adaptive.rate_adaptive_disabled)
+		return;
+	// TODO: Only 11n mode is implemented currently,
+	if( !(priv->ieee80211->mode==WIRELESS_MODE_N_24G ||
+		 priv->ieee80211->mode==WIRELESS_MODE_N_5G))
+		 return;
+	{
+			/* 2007/11/15 MH Copy from 8190PCI. */
+			u32 ratr_value;
+			ratr_value = reg_ratr;
+			if(priv->rf_type == RF_1T2R)	// 1T2R, Spatial Stream 2 should be disabled
+			{
+				ratr_value &=~ (RATE_ALL_OFDM_2SS);
+				//DbgPrint("HW_VAR_TATR_0 from 0x%x ==> 0x%x\n", ((pu4Byte)(val))[0], ratr_value);
+			}
+			//DbgPrint("set HW_VAR_TATR_0 = 0x%x\n", ratr_value);
+			//cosa PlatformEFIOWrite4Byte(Adapter, RATR0, ((pu4Byte)(val))[0]);
+			write_nic_dword(dev, RATR0, ratr_value);
+			write_nic_byte(dev, UFWP, 1);
+#if 0		// Disable old code.
+			u1Byte index;
+			u4Byte input_value;
+			index = (u1Byte)((((pu4Byte)(val))[0]) >> 28);
+			input_value = (((pu4Byte)(val))[0]) & 0x0fffffff;
+			// TODO: Correct it. Emily 2007.01.11
+			PlatformEFIOWrite4Byte(Adapter, RATR0+index*4, input_value);
+#endif
+	}
+	//Resore TX Power Tracking Index
+	if(priv->btxpower_trackingInit && priv->btxpower_tracking){
+		dm_txpower_reset_recovery(dev);
+	}
+
+	//
+	//Restore BB Initial Gain
+	//
+	dm_bb_initialgain_restore(dev);
+
+}	// DM_RestoreDynamicMechanismState
+
+static void dm_bb_initialgain_restore(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u32 bit_mask = 0x7f; //Bit0~ Bit6
+
+	if(dm_digtable.dig_algorithm == DIG_ALGO_BY_RSSI)
+		return;
+
+	//Disable Initial Gain
+	//PHY_SetBBReg(Adapter, UFWP, bMaskLWord, 0x800);
+	rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8);	// Only clear byte 1 and rewrite.
+	rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, bit_mask, (u32)priv->initgain_backup.xaagccore1);
+	rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, bit_mask, (u32)priv->initgain_backup.xbagccore1);
+	rtl8192_setBBreg(dev, rOFDM0_XCAGCCore1, bit_mask, (u32)priv->initgain_backup.xcagccore1);
+	rtl8192_setBBreg(dev, rOFDM0_XDAGCCore1, bit_mask, (u32)priv->initgain_backup.xdagccore1);
+	bit_mask  = bMaskByte2;
+	rtl8192_setBBreg(dev, rCCK0_CCA, bit_mask, (u32)priv->initgain_backup.cca);
+
+	RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xc50 is %x\n",priv->initgain_backup.xaagccore1);
+	RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xc58 is %x\n",priv->initgain_backup.xbagccore1);
+	RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xc60 is %x\n",priv->initgain_backup.xcagccore1);
+	RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xc68 is %x\n",priv->initgain_backup.xdagccore1);
+	RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xa0a is %x\n",priv->initgain_backup.cca);
+	//Enable Initial Gain
+	//PHY_SetBBReg(Adapter, UFWP, bMaskLWord, 0x100);
+	rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1);	// Only clear byte 1 and rewrite.
+
+}	// dm_BBInitialGainRestore
+
+
+extern void dm_backup_dynamic_mechanism_state(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	// Fsync to avoid reset
+	priv->bswitch_fsync  = false;
+	priv->bfsync_processing = false;
+	//Backup BB InitialGain
+	dm_bb_initialgain_backup(dev);
+
+}	// DM_BackupDynamicMechanismState
+
+
+static void dm_bb_initialgain_backup(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u32 bit_mask = bMaskByte0; //Bit0~ Bit6
+
+	if(dm_digtable.dig_algorithm == DIG_ALGO_BY_RSSI)
+		return;
+
+	//PHY_SetBBReg(Adapter, UFWP, bMaskLWord, 0x800);
+	rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8);	// Only clear byte 1 and rewrite.
+	priv->initgain_backup.xaagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XAAGCCore1, bit_mask);
+	priv->initgain_backup.xbagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XBAGCCore1, bit_mask);
+	priv->initgain_backup.xcagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XCAGCCore1, bit_mask);
+	priv->initgain_backup.xdagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XDAGCCore1, bit_mask);
+	bit_mask  = bMaskByte2;
+	priv->initgain_backup.cca = (u8)rtl8192_QueryBBReg(dev, rCCK0_CCA, bit_mask);
+
+	RT_TRACE(COMP_DIG, "BBInitialGainBackup 0xc50 is %x\n",priv->initgain_backup.xaagccore1);
+	RT_TRACE(COMP_DIG, "BBInitialGainBackup 0xc58 is %x\n",priv->initgain_backup.xbagccore1);
+	RT_TRACE(COMP_DIG, "BBInitialGainBackup 0xc60 is %x\n",priv->initgain_backup.xcagccore1);
+	RT_TRACE(COMP_DIG, "BBInitialGainBackup 0xc68 is %x\n",priv->initgain_backup.xdagccore1);
+	RT_TRACE(COMP_DIG, "BBInitialGainBackup 0xa0a is %x\n",priv->initgain_backup.cca);
+
+}   // dm_BBInitialGainBakcup
+
+#endif
+/*-----------------------------------------------------------------------------
+ * Function:	dm_change_dynamic_initgain_thresh()
+ *
+ * Overview:
+ *
+ * Input:		NONE
+ *
+ * Output:		NONE
+ *
+ * Return:		NONE
+ *
+ * Revised History:
+ *	When		Who		Remark
+ *	05/29/2008	amy		Create Version 0 porting from windows code.
+ *
+ *---------------------------------------------------------------------------*/
+extern void dm_change_dynamic_initgain_thresh(struct net_device *dev,
+								u32		dm_type,
+								u32		dm_value)
+{
+#ifdef RTL8192SU
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	if(dm_type == DIG_TYPE_THRESH_HIGHPWR_HIGH)
+		priv->MidHighPwrTHR_L2 = (u8)dm_value;
+	else if(dm_type == DIG_TYPE_THRESH_HIGHPWR_LOW)
+		priv->MidHighPwrTHR_L1 = (u8)dm_value;
+	return;
+#endif
+	if (dm_type == DIG_TYPE_THRESH_HIGH)
+	{
+		dm_digtable.rssi_high_thresh = dm_value;
+	}
+	else if (dm_type == DIG_TYPE_THRESH_LOW)
+	{
+		dm_digtable.rssi_low_thresh = dm_value;
+	}
+	else if (dm_type == DIG_TYPE_THRESH_HIGHPWR_HIGH)
+	{
+		dm_digtable.rssi_high_power_highthresh = dm_value;
+	}
+	else if (dm_type == DIG_TYPE_THRESH_HIGHPWR_HIGH)
+	{
+		dm_digtable.rssi_high_power_highthresh = dm_value;
+	}
+	else if (dm_type == DIG_TYPE_ENABLE)
+	{
+		dm_digtable.dig_state		= DM_STA_DIG_MAX;
+		dm_digtable.dig_enable_flag	= true;
+	}
+	else if (dm_type == DIG_TYPE_DISABLE)
+	{
+		dm_digtable.dig_state		= DM_STA_DIG_MAX;
+		dm_digtable.dig_enable_flag	= false;
+	}
+	else if (dm_type == DIG_TYPE_DBG_MODE)
+	{
+		if(dm_value >= DM_DBG_MAX)
+			dm_value = DM_DBG_OFF;
+		dm_digtable.dbg_mode		= (u8)dm_value;
+	}
+	else if (dm_type == DIG_TYPE_RSSI)
+	{
+		if(dm_value > 100)
+			dm_value = 30;
+		dm_digtable.rssi_val			= (long)dm_value;
+	}
+	else if (dm_type == DIG_TYPE_ALGORITHM)
+	{
+		if (dm_value >= DIG_ALGO_MAX)
+			dm_value = DIG_ALGO_BY_FALSE_ALARM;
+		if(dm_digtable.dig_algorithm != (u8)dm_value)
+			dm_digtable.dig_algorithm_switch = 1;
+		dm_digtable.dig_algorithm	= (u8)dm_value;
+	}
+	else if (dm_type == DIG_TYPE_BACKOFF)
+	{
+		if(dm_value > 30)
+			dm_value = 30;
+		dm_digtable.backoff_val		= (u8)dm_value;
+	}
+	else if(dm_type == DIG_TYPE_RX_GAIN_MIN)
+	{
+		if(dm_value == 0)
+			dm_value = 0x1;
+		dm_digtable.rx_gain_range_min = (u8)dm_value;
+	}
+	else if(dm_type == DIG_TYPE_RX_GAIN_MAX)
+	{
+		if(dm_value > 0x50)
+			dm_value = 0x50;
+		dm_digtable.rx_gain_range_max = (u8)dm_value;
+	}
+}	/* DM_ChangeDynamicInitGainThresh */
+extern	void
+dm_change_fsync_setting(
+	struct net_device *dev,
+	s32		DM_Type,
+	s32		DM_Value)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	if (DM_Type == 0)	// monitor 0xc38 register
+	{
+		if(DM_Value > 1)
+			DM_Value = 1;
+		priv->framesyncMonitor = (u8)DM_Value;
+		//DbgPrint("pHalData->framesyncMonitor = %d", pHalData->framesyncMonitor);
+	}
+}
+
+extern void
+dm_change_rxpath_selection_setting(
+	struct net_device *dev,
+	s32		DM_Type,
+	s32		DM_Value)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	prate_adaptive 	pRA = (prate_adaptive)&(priv->rate_adaptive);
+
+
+	if(DM_Type == 0)
+	{
+		if(DM_Value > 1)
+			DM_Value = 1;
+		DM_RxPathSelTable.Enable = (u8)DM_Value;
+	}
+	else if(DM_Type == 1)
+	{
+		if(DM_Value > 1)
+			DM_Value = 1;
+		DM_RxPathSelTable.DbgMode = (u8)DM_Value;
+	}
+	else if(DM_Type == 2)
+	{
+		if(DM_Value > 40)
+			DM_Value = 40;
+		DM_RxPathSelTable.SS_TH_low = (u8)DM_Value;
+	}
+	else if(DM_Type == 3)
+	{
+		if(DM_Value > 25)
+			DM_Value = 25;
+		DM_RxPathSelTable.diff_TH = (u8)DM_Value;
+	}
+	else if(DM_Type == 4)
+	{
+		if(DM_Value >= CCK_Rx_Version_MAX)
+			DM_Value = CCK_Rx_Version_1;
+		DM_RxPathSelTable.cck_method= (u8)DM_Value;
+	}
+	else if(DM_Type == 10)
+	{
+		if(DM_Value > 100)
+			DM_Value = 50;
+		DM_RxPathSelTable.rf_rssi[0] = (u8)DM_Value;
+	}
+	else if(DM_Type == 11)
+	{
+		if(DM_Value > 100)
+			DM_Value = 50;
+		DM_RxPathSelTable.rf_rssi[1] = (u8)DM_Value;
+	}
+	else if(DM_Type == 12)
+	{
+		if(DM_Value > 100)
+			DM_Value = 50;
+		DM_RxPathSelTable.rf_rssi[2] = (u8)DM_Value;
+	}
+	else if(DM_Type == 13)
+	{
+		if(DM_Value > 100)
+			DM_Value = 50;
+		DM_RxPathSelTable.rf_rssi[3] = (u8)DM_Value;
+	}
+	else if(DM_Type == 20)
+	{
+		if(DM_Value > 1)
+			DM_Value = 1;
+		pRA->ping_rssi_enable = (u8)DM_Value;
+	}
+	else if(DM_Type == 21)
+	{
+		if(DM_Value > 30)
+			DM_Value = 30;
+		pRA->ping_rssi_thresh_for_ra = DM_Value;
+	}
+}
+
+#if 0
+extern void dm_force_tx_fw_info(struct net_device *dev,
+										u32		force_type,
+										u32		force_value)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	if (force_type == 0)	// don't force TxSC
+	{
+		//DbgPrint("Set Force SubCarrier Off\n");
+		priv->tx_fwinfo_force_subcarriermode = 0;
+	}
+	else if(force_type == 1) //force
+	{
+		//DbgPrint("Set Force SubCarrier On\n");
+		priv->tx_fwinfo_force_subcarriermode = 1;
+		if(force_value > 3)
+			force_value = 3;
+		priv->tx_fwinfo_force_subcarrierval = (u8)force_value;
+	}
+}
+#endif
+
+/*-----------------------------------------------------------------------------
+ * Function:	dm_dig_init()
+ *
+ * Overview:	Set DIG scheme init value.
+ *
+ * Input:		NONE
+ *
+ * Output:		NONE
+ *
+ * Return:		NONE
+ *
+ * Revised History:
+ *	When		Who		Remark
+ *	05/15/2008	amy		Create Version 0 porting from windows code.
+ *
+ *---------------------------------------------------------------------------*/
+static void dm_dig_init(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	/* 2007/10/05 MH Disable DIG scheme now. Not tested. */
+	dm_digtable.dig_enable_flag	= true;
+	dm_digtable.dig_algorithm = DIG_ALGO_BY_RSSI;
+	dm_digtable.dbg_mode = DM_DBG_OFF;	//off=by real rssi value, on=by DM_DigTable.Rssi_val for new dig
+	dm_digtable.dig_algorithm_switch = 0;
+
+	/* 2007/10/04 MH Define init gain threshol. */
+	dm_digtable.dig_state		= DM_STA_DIG_MAX;
+	dm_digtable.dig_highpwr_state	= DM_STA_DIG_MAX;
+	dm_digtable.initialgain_lowerbound_state = false;
+
+	dm_digtable.rssi_low_thresh 	= DM_DIG_THRESH_LOW;
+	dm_digtable.rssi_high_thresh 	= DM_DIG_THRESH_HIGH;
+
+	dm_digtable.rssi_high_power_lowthresh = DM_DIG_HIGH_PWR_THRESH_LOW;
+	dm_digtable.rssi_high_power_highthresh = DM_DIG_HIGH_PWR_THRESH_HIGH;
+
+	dm_digtable.rssi_val = 50;	//for new dig debug rssi value
+	dm_digtable.backoff_val = DM_DIG_BACKOFF;
+	dm_digtable.rx_gain_range_max = DM_DIG_MAX;
+	if(priv->CustomerID == RT_CID_819x_Netcore)
+		dm_digtable.rx_gain_range_min = DM_DIG_MIN_Netcore;
+	else
+		dm_digtable.rx_gain_range_min = DM_DIG_MIN;
+
+}	/* dm_dig_init */
+
+
+/*-----------------------------------------------------------------------------
+ * Function:	dm_ctrl_initgain_byrssi()
+ *
+ * Overview:	Driver must monitor RSSI and notify firmware to change initial
+ *				gain according to different threshold. BB team provide the
+ *				suggested solution.
+ *
+ * Input:			struct net_device *dev
+ *
+ * Output:		NONE
+ *
+ * Return:		NONE
+ *
+ * Revised History:
+ *	When		Who		Remark
+ *	05/27/2008	amy		Create Version 0 porting from windows code.
+ *---------------------------------------------------------------------------*/
+static void dm_ctrl_initgain_byrssi(struct net_device *dev)
+{
+
+	if (dm_digtable.dig_enable_flag == false)
+		return;
+
+	if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM)
+		dm_ctrl_initgain_byrssi_by_fwfalse_alarm(dev);
+	else if(dm_digtable.dig_algorithm == DIG_ALGO_BY_RSSI)
+		dm_ctrl_initgain_byrssi_by_driverrssi(dev);
+//		;
+	else
+		return;
+}
+
+
+static void dm_ctrl_initgain_byrssi_by_driverrssi(
+	struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u8 i;
+	static u8 	fw_dig=0;
+
+	if (dm_digtable.dig_enable_flag == false)
+		return;
+
+	//DbgPrint("Dig by Sw Rssi \n");
+	if(dm_digtable.dig_algorithm_switch)	// if swithed algorithm, we have to disable FW Dig.
+		fw_dig = 0;
+	if(fw_dig <= 3)	// execute several times to make sure the FW Dig is disabled
+	{// FW DIG Off
+		for(i=0; i<3; i++)
+			rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8);	// Only clear byte 1 and rewrite.
+		fw_dig++;
+		dm_digtable.dig_state = DM_STA_DIG_OFF;	//fw dig off.
+	}
+
+	if(priv->ieee80211->state == IEEE80211_LINKED)
+		dm_digtable.cur_connect_state = DIG_CONNECT;
+	else
+		dm_digtable.cur_connect_state = DIG_DISCONNECT;
+
+	//DbgPrint("DM_DigTable.PreConnectState = %d, DM_DigTable.CurConnectState = %d \n",
+		//DM_DigTable.PreConnectState, DM_DigTable.CurConnectState);
+
+	if(dm_digtable.dbg_mode == DM_DBG_OFF)
+		dm_digtable.rssi_val = priv->undecorated_smoothed_pwdb;
+	//DbgPrint("DM_DigTable.Rssi_val = %d \n", DM_DigTable.Rssi_val);
+	dm_initial_gain(dev);
+	dm_pd_th(dev);
+	dm_cs_ratio(dev);
+	if(dm_digtable.dig_algorithm_switch)
+		dm_digtable.dig_algorithm_switch = 0;
+	dm_digtable.pre_connect_state = dm_digtable.cur_connect_state;
+
+}	/* dm_CtrlInitGainByRssi */
+
+static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
+	struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	static u32 reset_cnt = 0;
+	u8 i;
+
+	if (dm_digtable.dig_enable_flag == false)
+		return;
+
+	if(dm_digtable.dig_algorithm_switch)
+	{
+		dm_digtable.dig_state = DM_STA_DIG_MAX;
+		// Fw DIG On.
+		for(i=0; i<3; i++)
+			rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1);	// Only clear byte 1 and rewrite.
+		dm_digtable.dig_algorithm_switch = 0;
+	}
+
+	if (priv->ieee80211->state != IEEE80211_LINKED)
+		return;
+
+	// For smooth, we can not change DIG state.
+	if ((priv->undecorated_smoothed_pwdb > dm_digtable.rssi_low_thresh) &&
+		(priv->undecorated_smoothed_pwdb < dm_digtable.rssi_high_thresh))
+	{
+		return;
+	}
+	//DbgPrint("Dig by Fw False Alarm\n");
+	//if (DM_DigTable.Dig_State == DM_STA_DIG_OFF)
+	/*DbgPrint("DIG Check\n\r RSSI=%d LOW=%d HIGH=%d STATE=%d",
+	pHalData->UndecoratedSmoothedPWDB, DM_DigTable.RssiLowThresh,
+	DM_DigTable.RssiHighThresh, DM_DigTable.Dig_State);*/
+	/* 1. When RSSI decrease, We have to judge if it is smaller than a treshold
+		  and then execute below step. */
+	if ((priv->undecorated_smoothed_pwdb <= dm_digtable.rssi_low_thresh))
+	{
+		/* 2008/02/05 MH When we execute silent reset, the DIG PHY parameters
+		   will be reset to init value. We must prevent the condition. */
+		if (dm_digtable.dig_state == DM_STA_DIG_OFF &&
+			(priv->reset_count == reset_cnt))
+		{
+			return;
+		}
+		else
+		{
+			reset_cnt = priv->reset_count;
+		}
+
+		// If DIG is off, DIG high power state must reset.
+		dm_digtable.dig_highpwr_state = DM_STA_DIG_MAX;
+		dm_digtable.dig_state = DM_STA_DIG_OFF;
+
+		// 1.1 DIG Off.
+		rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8);	// Only clear byte 1 and rewrite.
+
+		// 1.2 Set initial gain.
+		write_nic_byte(dev, rOFDM0_XAAGCCore1, 0x17);
+		write_nic_byte(dev, rOFDM0_XBAGCCore1, 0x17);
+		write_nic_byte(dev, rOFDM0_XCAGCCore1, 0x17);
+		write_nic_byte(dev, rOFDM0_XDAGCCore1, 0x17);
+
+		// 1.3 Lower PD_TH for OFDM.
+		if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
+		{
+			/* 2008/01/11 MH 40MHZ 90/92 register are not the same. */
+			// 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
+#ifdef RTL8192SU
+			rtl8192_setBBreg(dev, (rOFDM0_XATxAFE+3), bMaskByte0, 0x00);
+#else
+			#ifdef RTL8190P
+				write_nic_byte(dev, rOFDM0_RxDetector1, 0x40);
+			#else
+				write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x00);
+			#endif
+#endif
+			/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
+				write_nic_byte(pAdapter, rOFDM0_RxDetector1, 0x40);
+			*/
+			//else if (pAdapter->HardwareType == HARDWARE_TYPE_RTL8192E)
+
+
+			//else
+				//PlatformEFIOWrite1Byte(pAdapter, rOFDM0_RxDetector1, 0x40);
+		}
+		else
+			write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
+
+		// 1.4 Lower CS ratio for CCK.
+		write_nic_byte(dev, 0xa0a, 0x08);
+
+		// 1.5 Higher EDCCA.
+		//PlatformEFIOWrite4Byte(pAdapter, rOFDM0_ECCAThreshold, 0x325);
+		return;
+
+	}
+
+	/* 2. When RSSI increase, We have to judge if it is larger than a treshold
+		  and then execute below step.  */
+	if ((priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_thresh) )
+	{
+		u8 reset_flag = 0;
+
+		if (dm_digtable.dig_state == DM_STA_DIG_ON &&
+			(priv->reset_count == reset_cnt))
+		{
+			dm_ctrl_initgain_byrssi_highpwr(dev);
+			return;
+		}
+		else
+		{
+			if (priv->reset_count != reset_cnt)
+				reset_flag = 1;
+
+			reset_cnt = priv->reset_count;
+		}
+
+		dm_digtable.dig_state = DM_STA_DIG_ON;
+		//DbgPrint("DIG ON\n\r");
+
+		// 2.1 Set initial gain.
+		// 2008/02/26 MH SD3-Jerry suggest to prevent dirty environment.
+		if (reset_flag == 1)
+		{
+			write_nic_byte(dev, rOFDM0_XAAGCCore1, 0x2c);
+			write_nic_byte(dev, rOFDM0_XBAGCCore1, 0x2c);
+			write_nic_byte(dev, rOFDM0_XCAGCCore1, 0x2c);
+			write_nic_byte(dev, rOFDM0_XDAGCCore1, 0x2c);
+		}
+		else
+		{
+			write_nic_byte(dev, rOFDM0_XAAGCCore1, 0x20);
+			write_nic_byte(dev, rOFDM0_XBAGCCore1, 0x20);
+			write_nic_byte(dev, rOFDM0_XCAGCCore1, 0x20);
+			write_nic_byte(dev, rOFDM0_XDAGCCore1, 0x20);
+		}
+
+		// 2.2 Higher PD_TH for OFDM.
+		if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
+		{
+			/* 2008/01/11 MH 40MHZ 90/92 register are not the same. */
+			// 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
+			#ifdef RTL8190P
+				write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
+			#else
+				write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x20);
+			#endif
+			/*
+			else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
+				write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
+			*/
+			//else if (pAdapter->HardwareType == HARDWARE_TYPE_RTL8192E)
+
+			//else
+				//PlatformEFIOWrite1Byte(pAdapter, rOFDM0_RxDetector1, 0x42);
+		}
+		else
+			write_nic_byte(dev, rOFDM0_RxDetector1, 0x44);
+
+		// 2.3 Higher CS ratio for CCK.
+		write_nic_byte(dev, 0xa0a, 0xcd);
+
+		// 2.4 Lower EDCCA.
+		/* 2008/01/11 MH 90/92 series are the same. */
+		//PlatformEFIOWrite4Byte(pAdapter, rOFDM0_ECCAThreshold, 0x346);
+
+		// 2.5 DIG On.
+		rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1);	// Only clear byte 1 and rewrite.
+
+	}
+
+	dm_ctrl_initgain_byrssi_highpwr(dev);
+
+}	/* dm_CtrlInitGainByRssi */
+
+
+/*-----------------------------------------------------------------------------
+ * Function:	dm_ctrl_initgain_byrssi_highpwr()
+ *
+ * Overview:
+ *
+ * Input:		NONE
+ *
+ * Output:		NONE
+ *
+ * Return:		NONE
+ *
+ * Revised History:
+ *	When		Who		Remark
+ *	05/28/2008	amy		Create Version 0 porting from windows code.
+ *
+ *---------------------------------------------------------------------------*/
+static void dm_ctrl_initgain_byrssi_highpwr(
+	struct net_device * dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	static u32 reset_cnt_highpwr = 0;
+
+	// For smooth, we can not change high power DIG state in the range.
+	if ((priv->undecorated_smoothed_pwdb > dm_digtable.rssi_high_power_lowthresh) &&
+		(priv->undecorated_smoothed_pwdb < dm_digtable.rssi_high_power_highthresh))
+	{
+		return;
+	}
+
+	/* 3. When RSSI >75% or <70%, it is a high power issue. We have to judge if
+		  it is larger than a treshold and then execute below step.  */
+	// 2008/02/05 MH SD3-Jerry Modify PD_TH for high power issue.
+	if (priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_power_highthresh)
+	{
+		if (dm_digtable.dig_highpwr_state == DM_STA_DIG_ON &&
+			(priv->reset_count == reset_cnt_highpwr))
+			return;
+		else
+			dm_digtable.dig_highpwr_state = DM_STA_DIG_ON;
+
+		// 3.1 Higher PD_TH for OFDM for high power state.
+		if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
+		{
+#ifdef RTL8192SU
+			rtl8192_setBBreg(dev, (rOFDM0_XATxAFE+3), bMaskByte0, 0x10);
+#else
+			#ifdef RTL8190P
+				write_nic_byte(dev, rOFDM0_RxDetector1, 0x41);
+			#else
+				write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x10);
+			#endif
+#endif
+			/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
+				write_nic_byte(dev, rOFDM0_RxDetector1, 0x41);
+			*/
+
+		}
+		else
+			write_nic_byte(dev, rOFDM0_RxDetector1, 0x43);
+	}
+	else
+	{
+		if (dm_digtable.dig_highpwr_state == DM_STA_DIG_OFF&&
+			(priv->reset_count == reset_cnt_highpwr))
+			return;
+		else
+			dm_digtable.dig_highpwr_state = DM_STA_DIG_OFF;
+
+		if (priv->undecorated_smoothed_pwdb < dm_digtable.rssi_high_power_lowthresh &&
+			 priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_thresh)
+		{
+			// 3.2 Recover PD_TH for OFDM for normal power region.
+			if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
+			{
+				#ifdef RTL8190P
+					write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
+				#else
+					write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x20);
+				#endif
+				/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
+					write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
+				*/
+
+			}
+			else
+				write_nic_byte(dev, rOFDM0_RxDetector1, 0x44);
+		}
+	}
+
+	reset_cnt_highpwr = priv->reset_count;
+
+}	/* dm_CtrlInitGainByRssiHighPwr */
+
+
+static void dm_initial_gain(
+	struct net_device * dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u8					initial_gain=0;
+	static u8				initialized=0, force_write=0;
+	static u32			reset_cnt=0;
+
+	if(dm_digtable.dig_algorithm_switch)
+	{
+		initialized = 0;
+		reset_cnt = 0;
+	}
+
+	if(dm_digtable.pre_connect_state == dm_digtable.cur_connect_state)
+	{
+		if(dm_digtable.cur_connect_state == DIG_CONNECT)
+		{
+			if((dm_digtable.rssi_val+10-dm_digtable.backoff_val) > dm_digtable.rx_gain_range_max)
+				dm_digtable.cur_ig_value = dm_digtable.rx_gain_range_max;
+			else if((dm_digtable.rssi_val+10-dm_digtable.backoff_val) < dm_digtable.rx_gain_range_min)
+				dm_digtable.cur_ig_value = dm_digtable.rx_gain_range_min;
+			else
+				dm_digtable.cur_ig_value = dm_digtable.rssi_val+10-dm_digtable.backoff_val;
+		}
+		else		//current state is disconnected
+		{
+			if(dm_digtable.cur_ig_value == 0)
+				dm_digtable.cur_ig_value = priv->DefaultInitialGain[0];
+			else
+				dm_digtable.cur_ig_value = dm_digtable.pre_ig_value;
+		}
+	}
+	else	// disconnected -> connected or connected -> disconnected
+	{
+		dm_digtable.cur_ig_value = priv->DefaultInitialGain[0];
+		dm_digtable.pre_ig_value = 0;
+	}
+	//DbgPrint("DM_DigTable.CurIGValue = 0x%x, DM_DigTable.PreIGValue = 0x%x\n", DM_DigTable.CurIGValue, DM_DigTable.PreIGValue);
+
+	// if silent reset happened, we should rewrite the values back
+	if(priv->reset_count != reset_cnt)
+	{
+		force_write = 1;
+		reset_cnt = priv->reset_count;
+	}
+
+	if(dm_digtable.pre_ig_value != read_nic_byte(dev, rOFDM0_XAAGCCore1))
+		force_write = 1;
+
+	{
+		if((dm_digtable.pre_ig_value != dm_digtable.cur_ig_value)
+			|| !initialized || force_write)
+		{
+			initial_gain = (u8)dm_digtable.cur_ig_value;
+			//DbgPrint("Write initial gain = 0x%x\n", initial_gain);
+			// Set initial gain.
+			write_nic_byte(dev, rOFDM0_XAAGCCore1, initial_gain);
+			write_nic_byte(dev, rOFDM0_XBAGCCore1, initial_gain);
+			write_nic_byte(dev, rOFDM0_XCAGCCore1, initial_gain);
+			write_nic_byte(dev, rOFDM0_XDAGCCore1, initial_gain);
+			dm_digtable.pre_ig_value = dm_digtable.cur_ig_value;
+			initialized = 1;
+			force_write = 0;
+		}
+	}
+}
+
+static void dm_pd_th(
+	struct net_device * dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	static u8				initialized=0, force_write=0;
+	static u32			reset_cnt = 0;
+
+	if(dm_digtable.dig_algorithm_switch)
+	{
+		initialized = 0;
+		reset_cnt = 0;
+	}
+
+	if(dm_digtable.pre_connect_state == dm_digtable.cur_connect_state)
+	{
+		if(dm_digtable.cur_connect_state == DIG_CONNECT)
+		{
+			if (dm_digtable.rssi_val >= dm_digtable.rssi_high_power_highthresh)
+				dm_digtable.curpd_thstate = DIG_PD_AT_HIGH_POWER;
+			else if ((dm_digtable.rssi_val <= dm_digtable.rssi_low_thresh))
+				dm_digtable.curpd_thstate = DIG_PD_AT_LOW_POWER;
+			else if ((dm_digtable.rssi_val >= dm_digtable.rssi_high_thresh) &&
+					(dm_digtable.rssi_val < dm_digtable.rssi_high_power_lowthresh))
+				dm_digtable.curpd_thstate = DIG_PD_AT_NORMAL_POWER;
+			else
+				dm_digtable.curpd_thstate = dm_digtable.prepd_thstate;
+		}
+		else
+		{
+			dm_digtable.curpd_thstate = DIG_PD_AT_LOW_POWER;
+		}
+	}
+	else	// disconnected -> connected or connected -> disconnected
+	{
+		dm_digtable.curpd_thstate = DIG_PD_AT_LOW_POWER;
+	}
+
+	// if silent reset happened, we should rewrite the values back
+	if(priv->reset_count != reset_cnt)
+	{
+		force_write = 1;
+		reset_cnt = priv->reset_count;
+	}
+
+	{
+		if((dm_digtable.prepd_thstate != dm_digtable.curpd_thstate) ||
+			(initialized<=3) || force_write)
+		{
+			//DbgPrint("Write PD_TH state = %d\n", DM_DigTable.CurPD_THState);
+			if(dm_digtable.curpd_thstate == DIG_PD_AT_LOW_POWER)
+			{
+				// Lower PD_TH for OFDM.
+				if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
+				{
+					/* 2008/01/11 MH 40MHZ 90/92 register are not the same. */
+					// 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
+#ifdef RTL8192SU
+					rtl8192_setBBreg(dev, (rOFDM0_XATxAFE+3), bMaskByte0, 0x00);
+#else
+					#ifdef RTL8190P
+						write_nic_byte(dev, rOFDM0_RxDetector1, 0x40);
+					#else
+						write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x00);
+					#endif
+#endif
+					/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
+						write_nic_byte(dev, rOFDM0_RxDetector1, 0x40);
+					*/
+				}
+				else
+					write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
+			}
+			else if(dm_digtable.curpd_thstate == DIG_PD_AT_NORMAL_POWER)
+			{
+				// Higher PD_TH for OFDM.
+				if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
+				{
+					/* 2008/01/11 MH 40MHZ 90/92 register are not the same. */
+					// 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
+					#ifdef RTL8190P
+						write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
+					#else
+						write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x20);
+					#endif
+					/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
+						write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
+					*/
+				}
+				else
+					write_nic_byte(dev, rOFDM0_RxDetector1, 0x44);
+			}
+			else if(dm_digtable.curpd_thstate == DIG_PD_AT_HIGH_POWER)
+			{
+				// Higher PD_TH for OFDM for high power state.
+				if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
+				{
+					#ifdef RTL8190P
+						write_nic_byte(dev, rOFDM0_RxDetector1, 0x41);
+					#else
+						write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x10);
+					#endif
+					/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
+						write_nic_byte(dev, rOFDM0_RxDetector1, 0x41);
+					*/
+				}
+				else
+					write_nic_byte(dev, rOFDM0_RxDetector1, 0x43);
+			}
+			dm_digtable.prepd_thstate = dm_digtable.curpd_thstate;
+			if(initialized <= 3)
+				initialized++;
+			force_write = 0;
+		}
+	}
+}
+
+static	void dm_cs_ratio(
+	struct net_device * dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	static u8				initialized=0,force_write=0;
+	static u32			reset_cnt = 0;
+
+	if(dm_digtable.dig_algorithm_switch)
+	{
+		initialized = 0;
+		reset_cnt = 0;
+	}
+
+	if(dm_digtable.pre_connect_state == dm_digtable.cur_connect_state)
+	{
+		if(dm_digtable.cur_connect_state == DIG_CONNECT)
+		{
+			if ((dm_digtable.rssi_val <= dm_digtable.rssi_low_thresh))
+				dm_digtable.curcs_ratio_state = DIG_CS_RATIO_LOWER;
+			else if ((dm_digtable.rssi_val >= dm_digtable.rssi_high_thresh) )
+				dm_digtable.curcs_ratio_state = DIG_CS_RATIO_HIGHER;
+			else
+				dm_digtable.curcs_ratio_state = dm_digtable.precs_ratio_state;
+		}
+		else
+		{
+			dm_digtable.curcs_ratio_state = DIG_CS_RATIO_LOWER;
+		}
+	}
+	else	// disconnected -> connected or connected -> disconnected
+	{
+		dm_digtable.curcs_ratio_state = DIG_CS_RATIO_LOWER;
+	}
+
+	// if silent reset happened, we should rewrite the values back
+	if(priv->reset_count != reset_cnt)
+	{
+		force_write = 1;
+		reset_cnt = priv->reset_count;
+	}
+
+
+	{
+		if((dm_digtable.precs_ratio_state != dm_digtable.curcs_ratio_state) ||
+			!initialized || force_write)
+		{
+			//DbgPrint("Write CS_ratio state = %d\n", DM_DigTable.CurCS_ratioState);
+			if(dm_digtable.curcs_ratio_state == DIG_CS_RATIO_LOWER)
+			{
+				// Lower CS ratio for CCK.
+				write_nic_byte(dev, 0xa0a, 0x08);
+			}
+			else if(dm_digtable.curcs_ratio_state == DIG_CS_RATIO_HIGHER)
+			{
+				// Higher CS ratio for CCK.
+				write_nic_byte(dev, 0xa0a, 0xcd);
+			}
+			dm_digtable.precs_ratio_state = dm_digtable.curcs_ratio_state;
+			initialized = 1;
+			force_write = 0;
+		}
+	}
+}
+
+extern void dm_init_edca_turbo(struct net_device * dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	priv->bcurrent_turbo_EDCA = false;
+	priv->ieee80211->bis_any_nonbepkts = false;
+	priv->bis_cur_rdlstate = false;
+}	// dm_init_edca_turbo
+
+#if 1
+static void dm_check_edca_turbo(
+	struct net_device * dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	PRT_HIGH_THROUGHPUT	pHTInfo = priv->ieee80211->pHTInfo;
+	//PSTA_QOS			pStaQos = pMgntInfo->pStaQos;
+
+	// Keep past Tx/Rx packet count for RT-to-RT EDCA turbo.
+	static unsigned long			lastTxOkCnt = 0;
+	static unsigned long			lastRxOkCnt = 0;
+	unsigned long				curTxOkCnt = 0;
+	unsigned long				curRxOkCnt = 0;
+
+	//
+	// Do not be Turbo if it's under WiFi config and Qos Enabled, because the EDCA parameters
+	// should follow the settings from QAP. By Bruce, 2007-12-07.
+	//
+	#if 1
+	if(priv->ieee80211->state != IEEE80211_LINKED)
+		goto dm_CheckEdcaTurbo_EXIT;
+	#endif
+	// We do not turn on EDCA turbo mode for some AP that has IOT issue
+	if(priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_DISABLE_EDCA_TURBO)
+		goto dm_CheckEdcaTurbo_EXIT;
+
+	{
+		u8* peername[11] = {"unknown", "realtek", "realtek_92se", "broadcom", "ralink", "atheros", "cisco", "marvell", "92u_softap", "self_softap"};
+		static int wb_tmp = 0;
+		if (wb_tmp == 0){
+			printk("%s():iot peer is %#x:%s, bssid:"MAC_FMT"\n",__FUNCTION__,pHTInfo->IOTPeer,peername[pHTInfo->IOTPeer], MAC_ARG(priv->ieee80211->current_network.bssid));
+			wb_tmp = 1;
+		}
+	}
+	// Check the status for current condition.
+	if(!priv->ieee80211->bis_any_nonbepkts)
+	{
+		curTxOkCnt = priv->stats.txbytesunicast - lastTxOkCnt;
+		curRxOkCnt = priv->stats.rxbytesunicast - lastRxOkCnt;
+#ifdef RTL8192SU
+		// Modify EDCA parameters selection bias
+		// For some APs, use downlink EDCA parameters for uplink+downlink
+		if(priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_EDCA_BIAS_ON_RX)
+		{
+			if(curTxOkCnt > 4*curRxOkCnt)
+			{
+				if(priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA)
+				{
+					write_nic_dword(dev, EDCAPARA_BE, edca_setting_UL[pHTInfo->IOTPeer]);
+					priv->bis_cur_rdlstate = false;
+				}
+			}
+			else
+			{
+				if(!priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA)
+				{
+					write_nic_dword(dev, EDCAPARA_BE, edca_setting_DL[pHTInfo->IOTPeer]);
+					priv->bis_cur_rdlstate = true;
+				}
+			}
+			priv->bcurrent_turbo_EDCA = true;
+		}
+		else
+		{
+			if(curRxOkCnt > 4*curTxOkCnt)
+			{
+				if(!priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA)
+				{
+					write_nic_dword(dev, EDCAPARA_BE, edca_setting_DL[pHTInfo->IOTPeer]);
+					priv->bis_cur_rdlstate = true;
+				}
+			}
+			else
+			{
+				if(priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA)
+				{
+					write_nic_dword(dev, EDCAPARA_BE, edca_setting_UL[pHTInfo->IOTPeer]);
+					priv->bis_cur_rdlstate = false;
+				}
+			}
+			priv->bcurrent_turbo_EDCA = true;
+		}
+#else
+		// For RT-AP, we needs to turn it on when Rx>Tx
+		if(curRxOkCnt > 4*curTxOkCnt)
+		{
+			//printk("%s():curRxOkCnt > 4*curTxOkCnt\n");
+			if(!priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA)
+			{
+				write_nic_dword(dev, EDCAPARA_BE, edca_setting_DL[pHTInfo->IOTPeer]);
+				priv->bis_cur_rdlstate = true;
+			}
+		}
+		else
+		{
+
+			//printk("%s():curRxOkCnt < 4*curTxOkCnt\n");
+			if(priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA)
+			{
+				write_nic_dword(dev, EDCAPARA_BE, edca_setting_UL[pHTInfo->IOTPeer]);
+				priv->bis_cur_rdlstate = false;
+			}
+
+		}
+
+		priv->bcurrent_turbo_EDCA = true;
+#endif
+	}
+	else
+	{
+		//
+		// Turn Off EDCA turbo here.
+		// Restore original EDCA according to the declaration of AP.
+		//
+		 if(priv->bcurrent_turbo_EDCA)
+		{
+
+			{
+				u8		u1bAIFS;
+				u32		u4bAcParam;
+				struct ieee80211_qos_parameters *qos_parameters = &priv->ieee80211->current_network.qos_data.parameters;
+				u8 mode = priv->ieee80211->mode;
+
+			// For Each time updating EDCA parameter, reset EDCA turbo mode status.
+				dm_init_edca_turbo(dev);
+				u1bAIFS = qos_parameters->aifs[0] * ((mode&(IEEE_G|IEEE_N_24G)) ?9:20) + aSifsTime;
+				u4bAcParam = ((((u32)(qos_parameters->tx_op_limit[0]))<< AC_PARAM_TXOP_LIMIT_OFFSET)|
+					(((u32)(qos_parameters->cw_max[0]))<< AC_PARAM_ECW_MAX_OFFSET)|
+					(((u32)(qos_parameters->cw_min[0]))<< AC_PARAM_ECW_MIN_OFFSET)|
+					((u32)u1bAIFS << AC_PARAM_AIFS_OFFSET));
+			//write_nic_dword(dev, WDCAPARA_ADD[i], u4bAcParam);
+				write_nic_dword(dev, EDCAPARA_BE,  u4bAcParam);
+
+			// Check ACM bit.
+			// If it is set, immediately set ACM control bit to downgrading AC for passing WMM testplan. Annie, 2005-12-13.
+				{
+			// TODO:  Modified this part and try to set acm control in only 1 IO processing!!
+
+					PACI_AIFSN	pAciAifsn = (PACI_AIFSN)&(qos_parameters->aifs[0]);
+					u8		AcmCtrl = read_nic_byte( dev, AcmHwCtrl );
+					if( pAciAifsn->f.ACM )
+					{ // ACM bit is 1.
+						AcmCtrl |= AcmHw_BeqEn;
+					}
+					else
+					{ // ACM bit is 0.
+						AcmCtrl &= (~AcmHw_BeqEn);
+					}
+
+					RT_TRACE( COMP_QOS,"SetHwReg8190pci(): [HW_VAR_ACM_CTRL] Write 0x%X\n", AcmCtrl ) ;
+					write_nic_byte(dev, AcmHwCtrl, AcmCtrl );
+				}
+			}
+			priv->bcurrent_turbo_EDCA = false;
+		}
+	}
+
+
+dm_CheckEdcaTurbo_EXIT:
+	// Set variables for next time.
+	priv->ieee80211->bis_any_nonbepkts = false;
+	lastTxOkCnt = priv->stats.txbytesunicast;
+	lastRxOkCnt = priv->stats.rxbytesunicast;
+}	// dm_CheckEdcaTurbo
+#endif
+
+extern void DM_CTSToSelfSetting(struct net_device * dev,u32 DM_Type, u32 DM_Value)
+{
+	struct r8192_priv *priv = ieee80211_priv((struct net_device *)dev);
+
+	if (DM_Type == 0)	// CTS to self disable/enable
+	{
+		if(DM_Value > 1)
+			DM_Value = 1;
+		priv->ieee80211->bCTSToSelfEnable = (bool)DM_Value;
+		//DbgPrint("pMgntInfo->bCTSToSelfEnable = %d\n", pMgntInfo->bCTSToSelfEnable);
+	}
+	else if(DM_Type == 1) //CTS to self Th
+	{
+		if(DM_Value >= 50)
+			DM_Value = 50;
+		priv->ieee80211->CTSToSelfTH = (u8)DM_Value;
+		//DbgPrint("pMgntInfo->CTSToSelfTH = %d\n", pMgntInfo->CTSToSelfTH);
+	}
+}
+
+static void dm_init_ctstoself(struct net_device * dev)
+{
+	struct r8192_priv *priv = ieee80211_priv((struct net_device *)dev);
+
+	priv->ieee80211->bCTSToSelfEnable = TRUE;
+	priv->ieee80211->CTSToSelfTH = CTSToSelfTHVal;
+}
+
+static void dm_ctstoself(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv((struct net_device *)dev);
+	PRT_HIGH_THROUGHPUT	pHTInfo = priv->ieee80211->pHTInfo;
+	static unsigned long				lastTxOkCnt = 0;
+	static unsigned long				lastRxOkCnt = 0;
+	unsigned long						curTxOkCnt = 0;
+	unsigned long						curRxOkCnt = 0;
+
+	if(priv->ieee80211->bCTSToSelfEnable != TRUE)
+	{
+		pHTInfo->IOTAction &= ~HT_IOT_ACT_FORCED_CTS2SELF;
+		return;
+	}
+	/*
+	1. Uplink
+	2. Linksys350/Linksys300N
+	3. <50 disable, >55 enable
+	*/
+
+	if(pHTInfo->IOTPeer == HT_IOT_PEER_BROADCOM)
+	{
+		curTxOkCnt = priv->stats.txbytesunicast - lastTxOkCnt;
+		curRxOkCnt = priv->stats.rxbytesunicast - lastRxOkCnt;
+		if(curRxOkCnt > 4*curTxOkCnt)	//downlink, disable CTS to self
+		{
+			pHTInfo->IOTAction &= ~HT_IOT_ACT_FORCED_CTS2SELF;
+			//DbgPrint("dm_CTSToSelf() ==> CTS to self disabled -- downlink\n");
+		}
+		else	//uplink
+		{
+		#if 1
+			pHTInfo->IOTAction |= HT_IOT_ACT_FORCED_CTS2SELF;
+		#else
+			if(priv->undecorated_smoothed_pwdb < priv->ieee80211->CTSToSelfTH)	// disable CTS to self
+			{
+				pHTInfo->IOTAction &= ~HT_IOT_ACT_FORCED_CTS2SELF;
+				//DbgPrint("dm_CTSToSelf() ==> CTS to self disabled\n");
+			}
+			else if(priv->undecorated_smoothed_pwdb >= (priv->ieee80211->CTSToSelfTH+5))	// enable CTS to self
+			{
+				pHTInfo->IOTAction |= HT_IOT_ACT_FORCED_CTS2SELF;
+				//DbgPrint("dm_CTSToSelf() ==> CTS to self enabled\n");
+			}
+		#endif
+		}
+
+		lastTxOkCnt = priv->stats.txbytesunicast;
+		lastRxOkCnt = priv->stats.rxbytesunicast;
+	}
+}
+
+
+#if 0
+/*-----------------------------------------------------------------------------
+ * Function:	dm_rf_operation_test_callback()
+ *
+ * Overview:	Only for RF operation test now.
+ *
+ * Input:		NONE
+ *
+ * Output:		NONE
+ *
+ * Return:		NONE
+ *
+ * Revised History:
+ *	When		Who		Remark
+ *	05/29/2008	amy		Create Version 0 porting from windows code.
+ *
+ *---------------------------------------------------------------------------*/
+extern void dm_rf_operation_test_callback(unsigned long dev)
+{
+//	struct r8192_priv *priv = ieee80211_priv((struct net_device *)dev);
+	u8 erfpath;
+
+
+	for(erfpath=0; erfpath<4; erfpath++)
+	{
+		//DbgPrint("Set RF-%d\n\r", eRFPath);
+		//PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3d7);
+		udelay(100);
+	}
+
+	{
+		//PlatformSetPeriodicTimer(Adapter, &pHalData->RfTest1Timer, 500);
+	}
+
+	// For test
+	{
+		//u8 i;
+		//PlatformSetPeriodicTimer(Adapter, &pHalData->RfTest1Timer, 500);
+#if 0
+		for(i=0; i<50; i++)
+		{
+			// Write Test
+			PHY_SetRFReg(Adapter, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
+			//delay_us(100);
+			PHY_SetRFReg(Adapter, RF90_PATH_A, 0x02, bMask12Bits, 0x4f);
+			//delay_us(100);
+			PHY_SetRFReg(Adapter, RF90_PATH_C, 0x02, bMask12Bits, 0x4d);
+			//delay_us(100);
+			PHY_SetRFReg(Adapter, RF90_PATH_C, 0x02, bMask12Bits, 0x4f);
+			//delay_us(100);
+
+#if 0
+			// Read test
+			PHY_QueryRFReg(Adapter, RF90_PATH_A, 0x02, bMask12Bits);
+			//delay_us(100);
+			PHY_QueryRFReg(Adapter, RF90_PATH_A, 0x02, bMask12Bits);
+			//delay_us(100);
+			PHY_QueryRFReg(Adapter, RF90_PATH_A, 0x12, bMask12Bits);
+			//delay_us(100);
+			PHY_QueryRFReg(Adapter, RF90_PATH_A, 0x12, bMask12Bits);
+			//delay_us(100);
+			PHY_QueryRFReg(Adapter, RF90_PATH_A, 0x21, bMask12Bits);
+			//delay_us(100);
+			PHY_QueryRFReg(Adapter, RF90_PATH_A, 0x21, bMask12Bits);
+			//delay_us(100);
+#endif
+		}
+#endif
+	}
+
+}	/* DM_RfOperationTestCallBack */
+#endif
+
+/*-----------------------------------------------------------------------------
+ * Function:	dm_check_rfctrl_gpio()
+ *
+ * Overview:	Copy 8187B template for 9xseries.
+ *
+ * Input:		NONE
+ *
+ * Output:		NONE
+ *
+ * Return:		NONE
+ *
+ * Revised History:
+ *	When		Who		Remark
+ *	05/28/2008	amy		Create Version 0 porting from windows code.
+ *
+ *---------------------------------------------------------------------------*/
+#if 1
+static void dm_check_rfctrl_gpio(struct net_device * dev)
+{
+	//struct r8192_priv *priv = ieee80211_priv(dev);
+
+	// Walk around for DTM test, we will not enable HW - radio on/off because r/w
+	// page 1 register before Lextra bus is enabled cause system fails when resuming
+	// from S4. 20080218, Emily
+
+	// Stop to execute workitem to prevent S3/S4 bug.
+#ifdef RTL8190P
+	return;
+#endif
+#ifdef RTL8192U
+	return;
+#endif
+#ifdef RTL8192SU
+	return;
+#endif
+#ifdef RTL8192E
+	#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+		queue_delayed_work(priv->priv_wq,&priv->gpio_change_rf_wq,0);
+	#else
+		#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+		schedule_task(&priv->gpio_change_rf_wq);
+             #else
+		queue_work(priv->priv_wq,&priv->gpio_change_rf_wq);
+		#endif
+	#endif
+#endif
+
+}	/* dm_CheckRfCtrlGPIO */
+
+#endif
+/*-----------------------------------------------------------------------------
+ * Function:	dm_check_pbc_gpio()
+ *
+ * Overview:	Check if PBC button is pressed.
+ *
+ * Input:		NONE
+ *
+ * Output:		NONE
+ *
+ * Return:		NONE
+ *
+ * Revised History:
+ *	When		Who		Remark
+ *	05/28/2008	amy 	Create Version 0 porting from windows code.
+ *
+ *---------------------------------------------------------------------------*/
+static	void	dm_check_pbc_gpio(struct net_device *dev)
+{
+#ifdef RTL8192U
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u8 tmp1byte;
+
+
+	tmp1byte = read_nic_byte(dev,GPI);
+	if(tmp1byte == 0xff)
+		return;
+
+	if (tmp1byte&BIT6 || tmp1byte&BIT0)
+	{
+		// Here we only set bPbcPressed to TRUE
+		// After trigger PBC, the variable will be set to FALSE
+		RT_TRACE(COMP_IO, "CheckPbcGPIO - PBC is pressed\n");
+		priv->bpbc_pressed = true;
+	}
+#endif
+#ifdef RTL8192SU
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u8	tmp1byte;
+
+	write_nic_byte(dev, MAC_PINMUX_CFG, (GPIOMUX_EN | GPIOSEL_GPIO));
+
+	tmp1byte = read_nic_byte(dev, GPIO_IO_SEL);
+	tmp1byte &= ~(HAL_8192S_HW_GPIO_WPS_BIT);
+	write_nic_byte(dev, GPIO_IO_SEL, tmp1byte);
+
+	tmp1byte = read_nic_byte(dev, GPIO_IN);
+
+	RT_TRACE(COMP_IO, "CheckPbcGPIO - %x\n", tmp1byte);
+
+	// Add by hpfan 2008.07.07 to fix read GPIO error from S3
+	if (tmp1byte == 0xff)
+		return ;
+
+	if (tmp1byte&HAL_8192S_HW_GPIO_WPS_BIT)
+	{
+		// Here we only set bPbcPressed to TRUE
+		// After trigger PBC, the variable will be set to FALSE
+		RT_TRACE(COMP_IO, "CheckPbcGPIO - PBC is pressed\n");
+		priv->bpbc_pressed = true;
+	}
+
+#endif
+
+
+}
+
+#ifdef RTL8192E
+
+/*-----------------------------------------------------------------------------
+ * Function:	dm_GPIOChangeRF
+ * Overview:	PCI will not support workitem call back HW radio on-off control.
+ *
+ * Input:		NONE
+ *
+ * Output:		NONE
+ *
+ * Return:		NONE
+ *
+ * Revised History:
+ *	When		Who		Remark
+ *	02/21/2008	MHC		Create Version 0.
+ *
+ *---------------------------------------------------------------------------*/
+ #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+extern	void	dm_gpio_change_rf_callback(struct work_struct *work)
+{
+	struct delayed_work *dwork = container_of(work,struct delayed_work,work);
+       struct r8192_priv *priv = container_of(dwork,struct r8192_priv,gpio_change_rf_wq);
+       struct net_device *dev = priv->ieee80211->dev;
+#else
+extern	void	dm_gpio_change_rf_callback(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+#endif
+	u8 tmp1byte;
+	RT_RF_POWER_STATE	eRfPowerStateToSet;
+	bool bActuallySet = false;
+
+	do{
+		bActuallySet=false;
+
+		if(!priv->up)
+		{
+			RT_TRACE((COMP_INIT | COMP_POWER | COMP_RF),"dm_gpio_change_rf_callback(): Callback function breaks out!!\n");
+		}
+		else
+		{
+			// 0x108 GPIO input register is read only
+			//set 0x108 B1= 1: RF-ON; 0: RF-OFF.
+			tmp1byte = read_nic_byte(dev,GPI);
+
+			eRfPowerStateToSet = (tmp1byte&BIT1) ?  eRfOn : eRfOff;
+
+			if( (priv->bHwRadioOff == true) && (eRfPowerStateToSet == eRfOn))
+			{
+				RT_TRACE(COMP_RF, "gpiochangeRF  - HW Radio ON\n");
+
+				priv->bHwRadioOff = false;
+				bActuallySet = true;
+			}
+			else if ( (priv->bHwRadioOff == false) && (eRfPowerStateToSet == eRfOff))
+			{
+				RT_TRACE(COMP_RF, "gpiochangeRF  - HW Radio OFF\n");
+				priv->bHwRadioOff = true;
+				bActuallySet = true;
+			}
+
+			if(bActuallySet)
+			{
+				#ifdef TO_DO
+				MgntActSet_RF_State(dev, eRfPowerStateToSet, RF_CHANGE_BY_HW);
+				//DrvIFIndicateCurrentPhyStatus(pAdapter);
+				#endif
+			}
+			else
+			{
+				msleep(2000);
+			}
+
+		}
+	}while(TRUE)
+
+}	/* dm_GPIOChangeRF */
+
+#endif
+/*-----------------------------------------------------------------------------
+ * Function:	DM_RFPathCheckWorkItemCallBack()
+ *
+ * Overview:	Check if Current RF RX path is enabled
+ *
+ * Input:		NONE
+ *
+ * Output:		NONE
+ *
+ * Return:		NONE
+ *
+ * Revised History:
+ *	When		Who		Remark
+ *	01/30/2008	MHC		Create Version 0.
+ *
+ *---------------------------------------------------------------------------*/
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+extern	void	dm_rf_pathcheck_workitemcallback(struct work_struct *work)
+{
+	struct delayed_work *dwork = container_of(work,struct delayed_work,work);
+       struct r8192_priv *priv = container_of(dwork,struct r8192_priv,rfpath_check_wq);
+       struct net_device *dev =priv->ieee80211->dev;
+#else
+extern	void	dm_rf_pathcheck_workitemcallback(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+#endif
+	//bool bactually_set = false;
+	u8 rfpath = 0, i;
+
+
+	/* 2008/01/30 MH After discussing with SD3 Jerry, 0xc04/0xd04 register will
+	   always be the same. We only read 0xc04 now. */
+	rfpath = read_nic_byte(dev, 0xc04);
+
+	// Check Bit 0-3, it means if RF A-D is enabled.
+	for (i = 0; i < RF90_PATH_MAX; i++)
+	{
+		if (rfpath & (0x01<<i))
+			priv->brfpath_rxenable[i] = 1;
+		else
+			priv->brfpath_rxenable[i] = 0;
+	}
+	if(!DM_RxPathSelTable.Enable)
+		return;
+
+	dm_rxpath_sel_byrssi(dev);
+}	/* DM_RFPathCheckWorkItemCallBack */
+
+static void dm_init_rxpath_selection(struct net_device * dev)
+{
+	u8 i;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	DM_RxPathSelTable.Enable = 1;	//default enabled
+	DM_RxPathSelTable.SS_TH_low = RxPathSelection_SS_TH_low;
+	DM_RxPathSelTable.diff_TH = RxPathSelection_diff_TH;
+	if(priv->CustomerID == RT_CID_819x_Netcore)
+		DM_RxPathSelTable.cck_method = CCK_Rx_Version_2;
+	else
+		DM_RxPathSelTable.cck_method = CCK_Rx_Version_1;
+	DM_RxPathSelTable.DbgMode = DM_DBG_OFF;
+	DM_RxPathSelTable.disabledRF = 0;
+	for(i=0; i<4; i++)
+	{
+		DM_RxPathSelTable.rf_rssi[i] = 50;
+		DM_RxPathSelTable.cck_pwdb_sta[i] = -64;
+		DM_RxPathSelTable.rf_enable_rssi_th[i] = 100;
+	}
+}
+
+static void dm_rxpath_sel_byrssi(struct net_device * dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u8				i, max_rssi_index=0, min_rssi_index=0, sec_rssi_index=0, rf_num=0;
+	u8				tmp_max_rssi=0, tmp_min_rssi=0, tmp_sec_rssi=0;
+	u8				cck_default_Rx=0x2;	//RF-C
+	u8				cck_optional_Rx=0x3;//RF-D
+	long				tmp_cck_max_pwdb=0, tmp_cck_min_pwdb=0, tmp_cck_sec_pwdb=0;
+	u8				cck_rx_ver2_max_index=0, cck_rx_ver2_min_index=0, cck_rx_ver2_sec_index=0;
+	u8				cur_rf_rssi;
+	long				cur_cck_pwdb;
+	static u8			disabled_rf_cnt=0, cck_Rx_Path_initialized=0;
+	u8				update_cck_rx_path;
+
+	if(priv->rf_type != RF_2T4R)
+		return;
+
+	if(!cck_Rx_Path_initialized)
+	{
+		DM_RxPathSelTable.cck_Rx_path = (read_nic_byte(dev, 0xa07)&0xf);
+		cck_Rx_Path_initialized = 1;
+	}
+
+	DM_RxPathSelTable.disabledRF = 0xf;
+	DM_RxPathSelTable.disabledRF &=~ (read_nic_byte(dev, 0xc04));
+
+	if(priv->ieee80211->mode == WIRELESS_MODE_B)
+	{
+		DM_RxPathSelTable.cck_method = CCK_Rx_Version_2;	//pure B mode, fixed cck version2
+		//DbgPrint("Pure B mode, use cck rx version2 \n");
+	}
+
+	//decide max/sec/min rssi index
+	for (i=0; i<RF90_PATH_MAX; i++)
+	{
+		if(!DM_RxPathSelTable.DbgMode)
+			DM_RxPathSelTable.rf_rssi[i] = priv->stats.rx_rssi_percentage[i];
+
+		if(priv->brfpath_rxenable[i])
+		{
+			rf_num++;
+			cur_rf_rssi = DM_RxPathSelTable.rf_rssi[i];
+
+			if(rf_num == 1)	// find first enabled rf path and the rssi values
+			{	//initialize, set all rssi index to the same one
+				max_rssi_index = min_rssi_index = sec_rssi_index = i;
+				tmp_max_rssi = tmp_min_rssi = tmp_sec_rssi = cur_rf_rssi;
+			}
+			else if(rf_num == 2)
+			{	// we pick up the max index first, and let sec and min to be the same one
+				if(cur_rf_rssi >= tmp_max_rssi)
+				{
+					tmp_max_rssi = cur_rf_rssi;
+					max_rssi_index = i;
+				}
+				else
+				{
+					tmp_sec_rssi = tmp_min_rssi = cur_rf_rssi;
+					sec_rssi_index = min_rssi_index = i;
+				}
+			}
+			else
+			{
+				if(cur_rf_rssi > tmp_max_rssi)
+				{
+					tmp_sec_rssi = tmp_max_rssi;
+					sec_rssi_index = max_rssi_index;
+					tmp_max_rssi = cur_rf_rssi;
+					max_rssi_index = i;
+				}
+				else if(cur_rf_rssi == tmp_max_rssi)
+				{	// let sec and min point to the different index
+					tmp_sec_rssi = cur_rf_rssi;
+					sec_rssi_index = i;
+				}
+				else if((cur_rf_rssi < tmp_max_rssi) &&(cur_rf_rssi > tmp_sec_rssi))
+				{
+					tmp_sec_rssi = cur_rf_rssi;
+					sec_rssi_index = i;
+				}
+				else if(cur_rf_rssi == tmp_sec_rssi)
+				{
+					if(tmp_sec_rssi == tmp_min_rssi)
+					{	// let sec and min point to the different index
+						tmp_sec_rssi = cur_rf_rssi;
+						sec_rssi_index = i;
+					}
+					else
+					{
+						// This case we don't need to set any index
+					}
+				}
+				else if((cur_rf_rssi < tmp_sec_rssi) && (cur_rf_rssi > tmp_min_rssi))
+				{
+					// This case we don't need to set any index
+				}
+				else if(cur_rf_rssi == tmp_min_rssi)
+				{
+					if(tmp_sec_rssi == tmp_min_rssi)
+					{	// let sec and min point to the different index
+						tmp_min_rssi = cur_rf_rssi;
+						min_rssi_index = i;
+					}
+					else
+					{
+						// This case we don't need to set any index
+					}
+				}
+				else if(cur_rf_rssi < tmp_min_rssi)
+				{
+					tmp_min_rssi = cur_rf_rssi;
+					min_rssi_index = i;
+				}
+			}
+		}
+	}
+
+	rf_num = 0;
+	// decide max/sec/min cck pwdb index
+	if(DM_RxPathSelTable.cck_method == CCK_Rx_Version_2)
+	{
+		for (i=0; i<RF90_PATH_MAX; i++)
+		{
+			if(priv->brfpath_rxenable[i])
+			{
+				rf_num++;
+				cur_cck_pwdb =  DM_RxPathSelTable.cck_pwdb_sta[i];
+
+				if(rf_num == 1)	// find first enabled rf path and the rssi values
+				{	//initialize, set all rssi index to the same one
+					cck_rx_ver2_max_index = cck_rx_ver2_min_index = cck_rx_ver2_sec_index = i;
+					tmp_cck_max_pwdb = tmp_cck_min_pwdb = tmp_cck_sec_pwdb = cur_cck_pwdb;
+				}
+				else if(rf_num == 2)
+				{	// we pick up the max index first, and let sec and min to be the same one
+					if(cur_cck_pwdb >= tmp_cck_max_pwdb)
+					{
+						tmp_cck_max_pwdb = cur_cck_pwdb;
+						cck_rx_ver2_max_index = i;
+					}
+					else
+					{
+						tmp_cck_sec_pwdb = tmp_cck_min_pwdb = cur_cck_pwdb;
+						cck_rx_ver2_sec_index = cck_rx_ver2_min_index = i;
+					}
+				}
+				else
+				{
+					if(cur_cck_pwdb > tmp_cck_max_pwdb)
+					{
+						tmp_cck_sec_pwdb = tmp_cck_max_pwdb;
+						cck_rx_ver2_sec_index = cck_rx_ver2_max_index;
+						tmp_cck_max_pwdb = cur_cck_pwdb;
+						cck_rx_ver2_max_index = i;
+					}
+					else if(cur_cck_pwdb == tmp_cck_max_pwdb)
+					{	// let sec and min point to the different index
+						tmp_cck_sec_pwdb = cur_cck_pwdb;
+						cck_rx_ver2_sec_index = i;
+					}
+					else if((cur_cck_pwdb < tmp_cck_max_pwdb) &&(cur_cck_pwdb > tmp_cck_sec_pwdb))
+					{
+						tmp_cck_sec_pwdb = cur_cck_pwdb;
+						cck_rx_ver2_sec_index = i;
+					}
+					else if(cur_cck_pwdb == tmp_cck_sec_pwdb)
+					{
+						if(tmp_cck_sec_pwdb == tmp_cck_min_pwdb)
+						{	// let sec and min point to the different index
+							tmp_cck_sec_pwdb = cur_cck_pwdb;
+							cck_rx_ver2_sec_index = i;
+						}
+						else
+						{
+							// This case we don't need to set any index
+						}
+					}
+					else if((cur_cck_pwdb < tmp_cck_sec_pwdb) && (cur_cck_pwdb > tmp_cck_min_pwdb))
+					{
+						// This case we don't need to set any index
+					}
+					else if(cur_cck_pwdb == tmp_cck_min_pwdb)
+					{
+						if(tmp_cck_sec_pwdb == tmp_cck_min_pwdb)
+						{	// let sec and min point to the different index
+							tmp_cck_min_pwdb = cur_cck_pwdb;
+							cck_rx_ver2_min_index = i;
+						}
+						else
+						{
+							// This case we don't need to set any index
+						}
+					}
+					else if(cur_cck_pwdb < tmp_cck_min_pwdb)
+					{
+						tmp_cck_min_pwdb = cur_cck_pwdb;
+						cck_rx_ver2_min_index = i;
+					}
+				}
+
+			}
+		}
+	}
+
+
+	// Set CCK Rx path
+	// reg0xA07[3:2]=cck default rx path, reg0xa07[1:0]=cck optional rx path.
+	update_cck_rx_path = 0;
+	if(DM_RxPathSelTable.cck_method == CCK_Rx_Version_2)
+	{
+		cck_default_Rx = cck_rx_ver2_max_index;
+		cck_optional_Rx = cck_rx_ver2_sec_index;
+		if(tmp_cck_max_pwdb != -64)
+			update_cck_rx_path = 1;
+	}
+
+	if(tmp_min_rssi < DM_RxPathSelTable.SS_TH_low && disabled_rf_cnt < 2)
+	{
+		if((tmp_max_rssi - tmp_min_rssi) >= DM_RxPathSelTable.diff_TH)
+		{
+			//record the enabled rssi threshold
+			DM_RxPathSelTable.rf_enable_rssi_th[min_rssi_index] = tmp_max_rssi+5;
+			//disable the BB Rx path, OFDM
+			rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x1<<min_rssi_index, 0x0);	// 0xc04[3:0]
+			rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x1<<min_rssi_index, 0x0);	// 0xd04[3:0]
+			disabled_rf_cnt++;
+		}
+		if(DM_RxPathSelTable.cck_method == CCK_Rx_Version_1)
+		{
+			cck_default_Rx = max_rssi_index;
+			cck_optional_Rx = sec_rssi_index;
+			if(tmp_max_rssi)
+				update_cck_rx_path = 1;
+		}
+	}
+
+	if(update_cck_rx_path)
+	{
+		DM_RxPathSelTable.cck_Rx_path = (cck_default_Rx<<2)|(cck_optional_Rx);
+		rtl8192_setBBreg(dev, rCCK0_AFESetting, 0x0f000000, DM_RxPathSelTable.cck_Rx_path);
+	}
+
+	if(DM_RxPathSelTable.disabledRF)
+	{
+		for(i=0; i<4; i++)
+		{
+			if((DM_RxPathSelTable.disabledRF>>i) & 0x1)	//disabled rf
+			{
+				if(tmp_max_rssi >= DM_RxPathSelTable.rf_enable_rssi_th[i])
+				{
+					//enable the BB Rx path
+					//DbgPrint("RF-%d is enabled. \n", 0x1<<i);
+					rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x1<<i, 0x1);	// 0xc04[3:0]
+					rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x1<<i, 0x1);	// 0xd04[3:0]
+					DM_RxPathSelTable.rf_enable_rssi_th[i] = 100;
+					disabled_rf_cnt--;
+				}
+			}
+		}
+	}
+}
+
+/*-----------------------------------------------------------------------------
+ * Function:	dm_check_rx_path_selection()
+ *
+ * Overview:	Call a workitem to check current RXRF path and Rx Path selection by RSSI.
+ *
+ * Input:		NONE
+ *
+ * Output:		NONE
+ *
+ * Return:		NONE
+ *
+ * Revised History:
+ *	When		Who		Remark
+ *	05/28/2008	amy		Create Version 0 porting from windows code.
+ *
+ *---------------------------------------------------------------------------*/
+static	void	dm_check_rx_path_selection(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+	queue_delayed_work(priv->priv_wq,&priv->rfpath_check_wq,0);
+#else
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+	schedule_task(&priv->rfpath_check_wq);
+#else
+	queue_work(priv->priv_wq,&priv->rfpath_check_wq);
+#endif
+#endif
+}	/* dm_CheckRxRFPath */
+
+
+static void dm_init_fsync (struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	priv->ieee80211->fsync_time_interval = 500;
+	priv->ieee80211->fsync_rate_bitmap = 0x0f000800;
+	priv->ieee80211->fsync_rssi_threshold = 30;
+#ifdef RTL8190P
+	priv->ieee80211->bfsync_enable = true;
+#else
+	priv->ieee80211->bfsync_enable = false;
+#endif
+	priv->ieee80211->fsync_multiple_timeinterval = 3;
+	priv->ieee80211->fsync_firstdiff_ratethreshold= 100;
+	priv->ieee80211->fsync_seconddiff_ratethreshold= 200;
+	priv->ieee80211->fsync_state = Default_Fsync;
+	priv->framesyncMonitor = 1;	// current default 0xc38 monitor on
+
+	init_timer(&priv->fsync_timer);
+	priv->fsync_timer.data = (unsigned long)dev;
+	priv->fsync_timer.function = dm_fsync_timer_callback;
+}
+
+
+static void dm_deInit_fsync(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	del_timer_sync(&priv->fsync_timer);
+}
+
+extern void dm_fsync_timer_callback(unsigned long data)
+{
+	struct net_device *dev = (struct net_device *)data;
+	struct r8192_priv *priv = ieee80211_priv((struct net_device *)data);
+	u32 rate_index, rate_count = 0, rate_count_diff=0;
+	bool		bSwitchFromCountDiff = false;
+	bool		bDoubleTimeInterval = false;
+
+	if(	priv->ieee80211->state == IEEE80211_LINKED &&
+		priv->ieee80211->bfsync_enable &&
+		(priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_CDD_FSYNC))
+	{
+		 // Count rate 54, MCS [7], [12, 13, 14, 15]
+		u32 rate_bitmap;
+		for(rate_index = 0; rate_index <= 27; rate_index++)
+		{
+			rate_bitmap  = 1 << rate_index;
+			if(priv->ieee80211->fsync_rate_bitmap &  rate_bitmap)
+		 		rate_count+= priv->stats.received_rate_histogram[1][rate_index];
+		}
+
+		if(rate_count < priv->rate_record)
+			rate_count_diff = 0xffffffff - rate_count + priv->rate_record;
+		else
+			rate_count_diff = rate_count - priv->rate_record;
+		if(rate_count_diff < priv->rateCountDiffRecord)
+		{
+
+			u32 DiffNum = priv->rateCountDiffRecord - rate_count_diff;
+			// Contiune count
+			if(DiffNum >= priv->ieee80211->fsync_seconddiff_ratethreshold)
+				priv->ContiuneDiffCount++;
+			else
+				priv->ContiuneDiffCount = 0;
+
+			// Contiune count over
+			if(priv->ContiuneDiffCount >=2)
+			{
+				bSwitchFromCountDiff = true;
+				priv->ContiuneDiffCount = 0;
+			}
+		}
+		else
+		{
+			// Stop contiune count
+			priv->ContiuneDiffCount = 0;
+		}
+
+		//If Count diff <= FsyncRateCountThreshold
+		if(rate_count_diff <= priv->ieee80211->fsync_firstdiff_ratethreshold)
+		{
+			bSwitchFromCountDiff = true;
+			priv->ContiuneDiffCount = 0;
+		}
+		priv->rate_record = rate_count;
+		priv->rateCountDiffRecord = rate_count_diff;
+		RT_TRACE(COMP_HALDM, "rateRecord %d rateCount %d, rateCountdiff %d bSwitchFsync %d\n", priv->rate_record, rate_count, rate_count_diff , priv->bswitch_fsync);
+		// if we never receive those mcs rate and rssi > 30 % then switch fsyn
+		if(priv->undecorated_smoothed_pwdb > priv->ieee80211->fsync_rssi_threshold && bSwitchFromCountDiff)
+		{
+			bDoubleTimeInterval = true;
+			priv->bswitch_fsync = !priv->bswitch_fsync;
+			if(priv->bswitch_fsync)
+			{
+			#ifdef RTL8190P
+				write_nic_byte(dev, 0xC36, 0x00);
+			#else
+				write_nic_byte(dev,0xC36, 0x1c);
+			#endif
+				write_nic_byte(dev, 0xC3e, 0x90);
+			}
+			else
+			{
+			#ifdef RTL8190P
+				write_nic_byte(dev, 0xC36, 0x40);
+			#else
+				write_nic_byte(dev, 0xC36, 0x5c);
+			#endif
+				write_nic_byte(dev, 0xC3e, 0x96);
+			}
+		}
+		else if(priv->undecorated_smoothed_pwdb <= priv->ieee80211->fsync_rssi_threshold)
+		{
+			if(priv->bswitch_fsync)
+			{
+				priv->bswitch_fsync  = false;
+			#ifdef RTL8190P
+				write_nic_byte(dev, 0xC36, 0x40);
+			#else
+				write_nic_byte(dev, 0xC36, 0x5c);
+			#endif
+				write_nic_byte(dev, 0xC3e, 0x96);
+			}
+		}
+		if(bDoubleTimeInterval){
+			if(timer_pending(&priv->fsync_timer))
+				del_timer_sync(&priv->fsync_timer);
+			priv->fsync_timer.expires = jiffies + MSECS(priv->ieee80211->fsync_time_interval*priv->ieee80211->fsync_multiple_timeinterval);
+			add_timer(&priv->fsync_timer);
+		}
+		else{
+			if(timer_pending(&priv->fsync_timer))
+				del_timer_sync(&priv->fsync_timer);
+			priv->fsync_timer.expires = jiffies + MSECS(priv->ieee80211->fsync_time_interval);
+			add_timer(&priv->fsync_timer);
+		}
+	}
+	else
+	{
+		// Let Register return to default value;
+		if(priv->bswitch_fsync)
+		{
+			priv->bswitch_fsync  = false;
+		#ifdef RTL8190P
+			write_nic_byte(dev, 0xC36, 0x40);
+		#else
+			write_nic_byte(dev, 0xC36, 0x5c);
+		#endif
+			write_nic_byte(dev, 0xC3e, 0x96);
+		}
+		priv->ContiuneDiffCount = 0;
+#ifdef RTL8192SU
+	rtl8192_setBBreg(dev, rOFDM0_RxDetector2, bMaskDWord, 0x164052cd);
+#else
+	#ifdef RTL8190P
+		write_nic_dword(dev, rOFDM0_RxDetector2, 0x164052cd);
+	#else
+		write_nic_dword(dev, rOFDM0_RxDetector2, 0x465c52cd);
+	#endif
+#endif
+	}
+	RT_TRACE(COMP_HALDM, "ContiuneDiffCount %d\n", priv->ContiuneDiffCount);
+	RT_TRACE(COMP_HALDM, "rateRecord %d rateCount %d, rateCountdiff %d bSwitchFsync %d\n", priv->rate_record, rate_count, rate_count_diff , priv->bswitch_fsync);
+}
+
+static void dm_StartHWFsync(struct net_device *dev)
+{
+	RT_TRACE(COMP_HALDM, "%s\n", __FUNCTION__);
+	write_nic_dword(dev, rOFDM0_RxDetector2, 0x465c12cf);
+	write_nic_byte(dev, 0xc3b, 0x41);
+}
+
+static void dm_EndSWFsync(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	RT_TRACE(COMP_HALDM, "%s\n", __FUNCTION__);
+	del_timer_sync(&(priv->fsync_timer));
+
+	// Let Register return to default value;
+	if(priv->bswitch_fsync)
+	{
+		priv->bswitch_fsync  = false;
+
+		#ifdef RTL8190P
+			write_nic_byte(dev, 0xC36, 0x40);
+		#else
+			write_nic_byte(dev, 0xC36, 0x5c);
+		#endif
+
+		write_nic_byte(dev, 0xC3e, 0x96);
+	}
+
+	priv->ContiuneDiffCount = 0;
+#ifndef RTL8190P
+	write_nic_dword(dev, rOFDM0_RxDetector2, 0x465c52cd);
+#endif
+
+}
+
+static void dm_StartSWFsync(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u32 			rateIndex;
+	u32 			rateBitmap;
+
+	RT_TRACE(COMP_HALDM,"%s\n", __FUNCTION__);
+	// Initial rate record to zero, start to record.
+	priv->rate_record = 0;
+	// Initial contiune diff count to zero, start to record.
+	priv->ContiuneDiffCount = 0;
+	priv->rateCountDiffRecord = 0;
+	priv->bswitch_fsync  = false;
+
+	if(priv->ieee80211->mode == WIRELESS_MODE_N_24G)
+	{
+		priv->ieee80211->fsync_firstdiff_ratethreshold= 600;
+		priv->ieee80211->fsync_seconddiff_ratethreshold = 0xffff;
+	}
+	else
+	{
+		priv->ieee80211->fsync_firstdiff_ratethreshold= 200;
+		priv->ieee80211->fsync_seconddiff_ratethreshold = 200;
+	}
+	for(rateIndex = 0; rateIndex <= 27; rateIndex++)
+	{
+		rateBitmap  = 1 << rateIndex;
+		if(priv->ieee80211->fsync_rate_bitmap &  rateBitmap)
+			priv->rate_record += priv->stats.received_rate_histogram[1][rateIndex];
+	}
+	if(timer_pending(&priv->fsync_timer))
+		del_timer_sync(&priv->fsync_timer);
+	priv->fsync_timer.expires = jiffies + MSECS(priv->ieee80211->fsync_time_interval);
+	add_timer(&priv->fsync_timer);
+
+#ifndef RTL8190P
+	write_nic_dword(dev, rOFDM0_RxDetector2, 0x465c12cd);
+#endif
+
+}
+
+static void dm_EndHWFsync(struct net_device *dev)
+{
+	RT_TRACE(COMP_HALDM,"%s\n", __FUNCTION__);
+	write_nic_dword(dev, rOFDM0_RxDetector2, 0x465c52cd);
+	write_nic_byte(dev, 0xc3b, 0x49);
+
+}
+
+void dm_check_fsync(struct net_device *dev)
+{
+#define	RegC38_Default				0
+#define	RegC38_NonFsync_Other_AP	1
+#define	RegC38_Fsync_AP_BCM		2
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	//u32 			framesyncC34;
+	static u8		reg_c38_State=RegC38_Default;
+	static u32	reset_cnt=0;
+
+	RT_TRACE(COMP_HALDM, "RSSI %d TimeInterval %d MultipleTimeInterval %d\n", priv->ieee80211->fsync_rssi_threshold, priv->ieee80211->fsync_time_interval, priv->ieee80211->fsync_multiple_timeinterval);
+	RT_TRACE(COMP_HALDM, "RateBitmap 0x%x FirstDiffRateThreshold %d SecondDiffRateThreshold %d\n", priv->ieee80211->fsync_rate_bitmap, priv->ieee80211->fsync_firstdiff_ratethreshold, priv->ieee80211->fsync_seconddiff_ratethreshold);
+
+	if(	priv->ieee80211->state == IEEE80211_LINKED &&
+		(priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_CDD_FSYNC))
+	{
+		if(priv->ieee80211->bfsync_enable == 0)
+		{
+			switch(priv->ieee80211->fsync_state)
+			{
+				case Default_Fsync:
+					dm_StartHWFsync(dev);
+					priv->ieee80211->fsync_state = HW_Fsync;
+					break;
+				case SW_Fsync:
+					dm_EndSWFsync(dev);
+					dm_StartHWFsync(dev);
+					priv->ieee80211->fsync_state = HW_Fsync;
+					break;
+				case HW_Fsync:
+				default:
+					break;
+			}
+		}
+		else
+		{
+			switch(priv->ieee80211->fsync_state)
+			{
+				case Default_Fsync:
+					dm_StartSWFsync(dev);
+					priv->ieee80211->fsync_state = SW_Fsync;
+					break;
+				case HW_Fsync:
+					dm_EndHWFsync(dev);
+					dm_StartSWFsync(dev);
+					priv->ieee80211->fsync_state = SW_Fsync;
+					break;
+				case SW_Fsync:
+				default:
+					break;
+
+			}
+		}
+		if(priv->framesyncMonitor)
+		{
+			if(reg_c38_State != RegC38_Fsync_AP_BCM)
+			{	//For broadcom AP we write different default value
+				#ifdef RTL8190P
+					write_nic_byte(dev, rOFDM0_RxDetector3, 0x15);
+				#else
+					write_nic_byte(dev, rOFDM0_RxDetector3, 0x95);
+				#endif
+
+				reg_c38_State = RegC38_Fsync_AP_BCM;
+			}
+		}
+	}
+	else
+	{
+		switch(priv->ieee80211->fsync_state)
+		{
+			case HW_Fsync:
+				dm_EndHWFsync(dev);
+				priv->ieee80211->fsync_state = Default_Fsync;
+				break;
+			case SW_Fsync:
+				dm_EndSWFsync(dev);
+				priv->ieee80211->fsync_state = Default_Fsync;
+				break;
+			case Default_Fsync:
+			default:
+				break;
+		}
+
+		if(priv->framesyncMonitor)
+		{
+			if(priv->ieee80211->state == IEEE80211_LINKED)
+			{
+				if(priv->undecorated_smoothed_pwdb <= RegC38_TH)
+				{
+					if(reg_c38_State != RegC38_NonFsync_Other_AP)
+					{
+						#ifdef RTL8190P
+							write_nic_byte(dev, rOFDM0_RxDetector3, 0x10);
+						#else
+							write_nic_byte(dev, rOFDM0_RxDetector3, 0x90);
+						#endif
+
+						reg_c38_State = RegC38_NonFsync_Other_AP;
+					#if 0//cosa
+						if (Adapter->HardwareType == HARDWARE_TYPE_RTL8190P)
+							DbgPrint("Fsync is idle, rssi<=35, write 0xc38 = 0x%x \n", 0x10);
+						else
+							DbgPrint("Fsync is idle, rssi<=35, write 0xc38 = 0x%x \n", 0x90);
+					#endif
+					}
+				}
+				else if(priv->undecorated_smoothed_pwdb >= (RegC38_TH+5))
+				{
+					if(reg_c38_State)
+					{
+						write_nic_byte(dev, rOFDM0_RxDetector3, priv->framesync);
+						reg_c38_State = RegC38_Default;
+						//DbgPrint("Fsync is idle, rssi>=40, write 0xc38 = 0x%x \n", pHalData->framesync);
+					}
+				}
+			}
+			else
+			{
+				if(reg_c38_State)
+				{
+					write_nic_byte(dev, rOFDM0_RxDetector3, priv->framesync);
+					reg_c38_State = RegC38_Default;
+					//DbgPrint("Fsync is idle, not connected, write 0xc38 = 0x%x \n", pHalData->framesync);
+				}
+			}
+		}
+	}
+	if(priv->framesyncMonitor)
+	{
+		if(priv->reset_count != reset_cnt)
+		{	//After silent reset, the reg_c38_State will be returned to default value
+			write_nic_byte(dev, rOFDM0_RxDetector3, priv->framesync);
+			reg_c38_State = RegC38_Default;
+			reset_cnt = priv->reset_count;
+			//DbgPrint("reg_c38_State = 0 for silent reset. \n");
+		}
+	}
+	else
+	{
+		if(reg_c38_State)
+		{
+			write_nic_byte(dev, rOFDM0_RxDetector3, priv->framesync);
+			reg_c38_State = RegC38_Default;
+			//DbgPrint("framesync no monitor, write 0xc38 = 0x%x \n", pHalData->framesync);
+		}
+	}
+}
+
+#if 0
+/*-----------------------------------------------------------------------------
+ * Function:	DM_CheckLBusStatus()
+ *
+ * Overview:	For 9x series, we must make sure LBUS is active for IO.
+ *
+ * Input:		NONE
+ *
+ * Output:		NONE
+ *
+ * Return:		NONE
+ *
+ * Revised History:
+ *	When		Who		Remark
+ *	02/22/2008	MHC		Create Version 0.
+ *
+ *---------------------------------------------------------------------------*/
+extern	s1Byte	DM_CheckLBusStatus(IN	PADAPTER	Adapter)
+{
+	PMGNT_INFO	pMgntInfo=&Adapter->MgntInfo;
+
+#if (HAL_CODE_BASE & RTL819X)
+
+#if (HAL_CODE_BASE == RTL8192)
+
+#if( DEV_BUS_TYPE==PCI_INTERFACE)
+	//return (pMgntInfo->bLbusEnable);	// For debug only
+	return TRUE;
+#endif
+
+#if( DEV_BUS_TYPE==USB_INTERFACE)
+	return TRUE;
+#endif
+
+#endif	// #if (HAL_CODE_BASE == RTL8192)
+
+#if (HAL_CODE_BASE == RTL8190)
+	return TRUE;
+#endif	// #if (HAL_CODE_BASE == RTL8190)
+
+#endif	// #if (HAL_CODE_BASE & RTL819X)
+}	/* DM_CheckLBusStatus */
+
+#endif
+
+/*-----------------------------------------------------------------------------
+ * Function:	dm_shadow_init()
+ *
+ * Overview:	Store all NIC MAC/BB register content.
+ *
+ * Input:		NONE
+ *
+ * Output:		NONE
+ *
+ * Return:		NONE
+ *
+ * Revised History:
+ *	When		Who		Remark
+ *	05/29/2008	amy		Create Version 0 porting from windows code.
+ *
+ *---------------------------------------------------------------------------*/
+extern void dm_shadow_init(struct net_device *dev)
+{
+	u8	page;
+	u16	offset;
+
+	for (page = 0; page < 5; page++)
+		for (offset = 0; offset < 256; offset++)
+		{
+			dm_shadow[page][offset] = read_nic_byte(dev, offset+page*256);
+			//DbgPrint("P-%d/O-%02x=%02x\r\n", page, offset, DM_Shadow[page][offset]);
+		}
+
+	for (page = 8; page < 11; page++)
+		for (offset = 0; offset < 256; offset++)
+			dm_shadow[page][offset] = read_nic_byte(dev, offset+page*256);
+
+	for (page = 12; page < 15; page++)
+		for (offset = 0; offset < 256; offset++)
+			dm_shadow[page][offset] = read_nic_byte(dev, offset+page*256);
+
+}   /* dm_shadow_init */
+
+/*---------------------------Define function prototype------------------------*/
+/*-----------------------------------------------------------------------------
+ * Function:	DM_DynamicTxPower()
+ *
+ * Overview:	Detect Signal strength to control TX Registry
+ 			Tx Power Control For Near/Far Range
+ *
+ * Input:		NONE
+ *
+ * Output:		NONE
+ *
+ * Return:		NONE
+ *
+ * Revised History:
+ *	When		Who		Remark
+ *	03/06/2008	Jacken	Create Version 0.
+ *
+ *---------------------------------------------------------------------------*/
+static void dm_init_dynamic_txpower(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	//Initial TX Power Control for near/far range , add by amy 2008/05/15, porting from windows code.
+	priv->ieee80211->bdynamic_txpower_enable = true;    //Default to enable Tx Power Control
+	priv->bLastDTPFlag_High = false;
+	priv->bLastDTPFlag_Low = false;
+	priv->bDynamicTxHighPower = false;
+	priv->bDynamicTxLowPower = false;
+}
+
+static void dm_dynamic_txpower(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	unsigned int txhipower_threshhold=0;
+	unsigned int txlowpower_threshold=0;
+	if(priv->ieee80211->bdynamic_txpower_enable != true)
+	{
+		priv->bDynamicTxHighPower = false;
+		priv->bDynamicTxLowPower = false;
+		return;
+	}
+	//printk("priv->ieee80211->current_network.unknown_cap_exist is %d ,priv->ieee80211->current_network.broadcom_cap_exist is %d\n",priv->ieee80211->current_network.unknown_cap_exist,priv->ieee80211->current_network.broadcom_cap_exist);
+	if((priv->ieee80211->current_network.atheros_cap_exist ) && (priv->ieee80211->mode == IEEE_G)){
+		txhipower_threshhold = TX_POWER_ATHEROAP_THRESH_HIGH;
+		txlowpower_threshold = TX_POWER_ATHEROAP_THRESH_LOW;
+	}
+	else
+	{
+		txhipower_threshhold = TX_POWER_NEAR_FIELD_THRESH_HIGH;
+		txlowpower_threshold = TX_POWER_NEAR_FIELD_THRESH_LOW;
+	}
+
+//	printk("=======>%s(): txhipower_threshhold is %d,txlowpower_threshold is %d\n",__FUNCTION__,txhipower_threshhold,txlowpower_threshold);
+	RT_TRACE(COMP_TXAGC,"priv->undecorated_smoothed_pwdb = %ld \n" , priv->undecorated_smoothed_pwdb);
+
+	if(priv->ieee80211->state == IEEE80211_LINKED)
+	{
+		if(priv->undecorated_smoothed_pwdb >= txhipower_threshhold)
+		{
+			priv->bDynamicTxHighPower = true;
+			priv->bDynamicTxLowPower = false;
+		}
+		else
+		{
+			// high power state check
+			if(priv->undecorated_smoothed_pwdb < txlowpower_threshold && priv->bDynamicTxHighPower == true)
+			{
+				priv->bDynamicTxHighPower = false;
+			}
+			// low power state check
+			if(priv->undecorated_smoothed_pwdb < 35)
+			{
+				priv->bDynamicTxLowPower = true;
+			}
+			else if(priv->undecorated_smoothed_pwdb >= 40)
+			{
+				priv->bDynamicTxLowPower = false;
+			}
+		}
+	}
+	else
+	{
+		//pHalData->bTXPowerCtrlforNearFarRange = !pHalData->bTXPowerCtrlforNearFarRange;
+		priv->bDynamicTxHighPower = false;
+		priv->bDynamicTxLowPower = false;
+	}
+
+	if( (priv->bDynamicTxHighPower != priv->bLastDTPFlag_High ) ||
+		(priv->bDynamicTxLowPower != priv->bLastDTPFlag_Low ) )
+	{
+		RT_TRACE(COMP_TXAGC,"SetTxPowerLevel8190()  channel = %d \n" , priv->ieee80211->current_network.channel);
+#ifndef RTL8192SU
+#if  defined(RTL8190P) || defined(RTL8192E)
+		SetTxPowerLevel8190(Adapter,pHalData->CurrentChannel);
+#endif
+
+#ifdef RTL8192U
+		rtl8192_phy_setTxPower(dev,priv->ieee80211->current_network.channel);
+		//pHalData->bStartTxCtrlByTPCNFR = FALSE;    //Clear th flag of Set TX Power from Sitesurvey
+#endif
+#endif
+	}
+	priv->bLastDTPFlag_High = priv->bDynamicTxHighPower;
+	priv->bLastDTPFlag_Low = priv->bDynamicTxLowPower;
+
+}	/* dm_dynamic_txpower */
+
+//added by vivi, for read tx rate and retrycount
+static void dm_check_txrateandretrycount(struct net_device * dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	struct ieee80211_device* ieee = priv->ieee80211;
+	//for 11n tx rate
+//	priv->stats.CurrentShowTxate = read_nic_byte(dev, Current_Tx_Rate_Reg);
+#ifdef RTL8192SU
+	ieee->softmac_stats.CurrentShowTxate = read_nic_byte(dev, TX_RATE_REG);
+#else
+	ieee->softmac_stats.CurrentShowTxate = read_nic_byte(dev, Current_Tx_Rate_Reg);
+#endif
+	//printk("=============>tx_rate_reg:%x\n", ieee->softmac_stats.CurrentShowTxate);
+	//for initial tx rate
+//	priv->stats.last_packet_rate = read_nic_byte(dev, Initial_Tx_Rate_Reg);
+	ieee->softmac_stats.last_packet_rate = read_nic_byte(dev ,Initial_Tx_Rate_Reg);
+	//for tx tx retry count
+//	priv->stats.txretrycount = read_nic_dword(dev, Tx_Retry_Count_Reg);
+	ieee->softmac_stats.txretrycount = read_nic_dword(dev, Tx_Retry_Count_Reg);
+}
+
+static void dm_send_rssi_tofw(struct net_device *dev)
+{
+#ifndef RTL8192SU
+	DCMD_TXCMD_T			tx_cmd;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	// If we test chariot, we should stop the TX command ?
+	// Because 92E will always silent reset when we send tx command. We use register
+	// 0x1e0(byte) to botify driver.
+	write_nic_byte(dev, DRIVER_RSSI, (u8)priv->undecorated_smoothed_pwdb);
+	return;
+#if 1
+	tx_cmd.Op		= TXCMD_SET_RX_RSSI;
+	tx_cmd.Length	= 4;
+	tx_cmd.Value		= priv->undecorated_smoothed_pwdb;
+
+	cmpk_message_handle_tx(dev, (u8*)&tx_cmd,
+								DESC_PACKET_TYPE_INIT, sizeof(DCMD_TXCMD_T));
+#endif
+#endif
+}
+
+#ifdef TO_DO_LIST
+static	void
+dm_CheckProtection(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	//PMGNT_INFO		pMgntInfo = &(Adapter->MgntInfo);
+	u8			CurRate;
+
+	if(priv->ieee80211->pHTInfo->IOTAction & (HT_IOT_ACT_FORCED_RTS|HT_IOT_ACT_FORCED_CTS2SELF))
+	{
+		CurRate = read_nic_byte(dev, INIMCS_SEL);
+		if(CurRate <= DESC92S_RATE11M)
+			priv->bDmDisableProtect = true;
+		else
+			priv->bDmDisableProtect = fasle;
+	}
+}
+#endif
+
+/*---------------------------Define function prototype------------------------*/
+
diff --git a/drivers/staging/rtl8192su/r8192U_dm.h b/drivers/staging/rtl8192su/r8192U_dm.h
new file mode 100644
index 00000000000..1e05d757988
--- /dev/null
+++ b/drivers/staging/rtl8192su/r8192U_dm.h
@@ -0,0 +1,309 @@
+/*****************************************************************************
+ *	Copyright(c) 2007,  RealTEK Technology Inc. All Right Reserved.
+ *
+ * Module:		Hal819xUsbDM.h	(RTL8192  Header H File)
+ *
+ *
+ * Note:		For dynamic control definition constant structure.
+ *
+ *
+ * Export:
+ *
+ * Abbrev:
+ *
+ * History:
+ *	Data		Who		Remark
+ *	10/04/2007  MHC    	Create initial version.
+ *
+ *****************************************************************************/
+ /* Check to see if the file has been included already.  */
+#ifndef	__R8192UDM_H__
+#define __R8192UDM_H__
+
+
+/*--------------------------Define Parameters-------------------------------*/
+#define		DM_DIG_THRESH_HIGH					40
+#define		DM_DIG_THRESH_LOW					35
+
+#define		DM_DIG_HIGH_PWR_THRESH_HIGH		75
+#define		DM_DIG_HIGH_PWR_THRESH_LOW		70
+
+#define		BW_AUTO_SWITCH_HIGH_LOW			25
+#define		BW_AUTO_SWITCH_LOW_HIGH			30
+
+#define		DM_check_fsync_time_interval				500
+
+
+#define		DM_DIG_BACKOFF				12
+#define		DM_DIG_MAX					0x36
+#define		DM_DIG_MIN					0x1c
+#define		DM_DIG_MIN_Netcore			0x12
+
+#define		RxPathSelection_SS_TH_low		30
+#define		RxPathSelection_diff_TH			18
+
+#define		RateAdaptiveTH_High			50
+#define		RateAdaptiveTH_Low_20M		30
+#define		RateAdaptiveTH_Low_40M		10
+#define		VeryLowRSSI					15
+#define		CTSToSelfTHVal					30
+
+//defined by vivi, for tx power track
+#define		E_FOR_TX_POWER_TRACK               300
+//Dynamic Tx Power Control Threshold
+#define		TX_POWER_NEAR_FIELD_THRESH_HIGH		68
+#define		TX_POWER_NEAR_FIELD_THRESH_LOW		62
+//added by amy for atheros AP
+#define         TX_POWER_ATHEROAP_THRESH_HIGH           78
+#define 	TX_POWER_ATHEROAP_THRESH_LOW		72
+
+//defined by vivi, for showing on UI
+#define 		Current_Tx_Rate_Reg         0x1b8
+#define 		Initial_Tx_Rate_Reg         	  0x1b9
+#define 		Tx_Retry_Count_Reg         0x1ac
+#define		RegC38_TH				 20
+#if 0
+//----------------------------------------------------------------------------
+//       8190 Rate Adaptive Table Register	(offset 0x320, 4 byte)
+//----------------------------------------------------------------------------
+
+//CCK
+#define	RATR_1M					0x00000001
+#define	RATR_2M					0x00000002
+#define	RATR_55M					0x00000004
+#define	RATR_11M					0x00000008
+//OFDM
+#define	RATR_6M					0x00000010
+#define	RATR_9M					0x00000020
+#define	RATR_12M					0x00000040
+#define	RATR_18M					0x00000080
+#define	RATR_24M					0x00000100
+#define	RATR_36M					0x00000200
+#define	RATR_48M					0x00000400
+#define	RATR_54M					0x00000800
+//MCS 1 Spatial Stream
+#define	RATR_MCS0					0x00001000
+#define	RATR_MCS1					0x00002000
+#define	RATR_MCS2					0x00004000
+#define	RATR_MCS3					0x00008000
+#define	RATR_MCS4					0x00010000
+#define	RATR_MCS5					0x00020000
+#define	RATR_MCS6					0x00040000
+#define	RATR_MCS7					0x00080000
+//MCS 2 Spatial Stream
+#define	RATR_MCS8					0x00100000
+#define	RATR_MCS9					0x00200000
+#define	RATR_MCS10					0x00400000
+#define	RATR_MCS11					0x00800000
+#define	RATR_MCS12					0x01000000
+#define	RATR_MCS13					0x02000000
+#define	RATR_MCS14					0x04000000
+#define	RATR_MCS15					0x08000000
+// ALL CCK Rate
+#define RATE_ALL_CCK				RATR_1M|RATR_2M|RATR_55M|RATR_11M
+#define RATE_ALL_OFDM_AG			RATR_6M|RATR_9M|RATR_12M|RATR_18M|RATR_24M\
+									|RATR_36M|RATR_48M|RATR_54M
+#define RATE_ALL_OFDM_2SS			RATR_MCS8|RATR_MCS9	|RATR_MCS10|RATR_MCS11| \
+									RATR_MCS12|RATR_MCS13|RATR_MCS14|RATR_MCS15
+#endif
+/*--------------------------Define Parameters-------------------------------*/
+
+
+/*------------------------------Define structure----------------------------*/
+/* 2007/10/04 MH Define upper and lower threshold of DIG enable or disable. */
+typedef struct _dynamic_initial_gain_threshold_
+{
+	u8		dig_enable_flag;
+	u8		dig_algorithm;
+	u8		dbg_mode;
+	u8		dig_algorithm_switch;
+
+	long		rssi_low_thresh;
+	long		rssi_high_thresh;
+
+	long		rssi_high_power_lowthresh;
+	long		rssi_high_power_highthresh;
+
+	u8		dig_state;
+	u8		dig_highpwr_state;
+	u8		cur_connect_state;
+	u8		pre_connect_state;
+
+	u8		curpd_thstate;
+	u8		prepd_thstate;
+	u8		curcs_ratio_state;
+	u8		precs_ratio_state;
+
+	u32		pre_ig_value;
+	u32		cur_ig_value;
+
+	u8		backoff_val;
+	u8		rx_gain_range_max;
+	u8		rx_gain_range_min;
+	bool		initialgain_lowerbound_state;
+
+	long		rssi_val;
+}dig_t;
+
+typedef enum tag_dynamic_init_gain_state_definition
+{
+	DM_STA_DIG_OFF = 0,
+	DM_STA_DIG_ON,
+	DM_STA_DIG_MAX
+}dm_dig_sta_e;
+
+
+/* 2007/10/08 MH Define RATR state. */
+typedef enum tag_dynamic_ratr_state_definition
+{
+	DM_RATR_STA_HIGH = 0,
+	DM_RATR_STA_MIDDLE = 1,
+	DM_RATR_STA_LOW = 2,
+	DM_RATR_STA_MAX
+}dm_ratr_sta_e;
+
+/* 2007/10/11 MH Define DIG operation type. */
+typedef enum tag_dynamic_init_gain_operation_type_definition
+{
+	DIG_TYPE_THRESH_HIGH	= 0,
+	DIG_TYPE_THRESH_LOW	= 1,
+	DIG_TYPE_THRESH_HIGHPWR_HIGH	= 2,
+	DIG_TYPE_THRESH_HIGHPWR_LOW	= 3,
+	DIG_TYPE_DBG_MODE				= 4,
+	DIG_TYPE_RSSI						= 5,
+	DIG_TYPE_ALGORITHM				= 6,
+	DIG_TYPE_BACKOFF					= 7,
+	DIG_TYPE_PWDB_FACTOR			= 8,
+	DIG_TYPE_RX_GAIN_MIN				= 9,
+	DIG_TYPE_RX_GAIN_MAX				= 10,
+	DIG_TYPE_ENABLE 		= 20,
+	DIG_TYPE_DISABLE 		= 30,
+	DIG_OP_TYPE_MAX
+}dm_dig_op_e;
+
+typedef enum tag_dig_algorithm_definition
+{
+	DIG_ALGO_BY_FALSE_ALARM = 0,
+	DIG_ALGO_BY_RSSI	= 1,
+	DIG_ALGO_MAX
+}dm_dig_alg_e;
+
+typedef enum tag_dig_dbgmode_definition
+{
+	DIG_DBG_OFF = 0,
+	DIG_DBG_ON = 1,
+	DIG_DBG_MAX
+}dm_dig_dbg_e;
+
+typedef enum tag_dig_connect_definition
+{
+	DIG_DISCONNECT = 0,
+	DIG_CONNECT = 1,
+	DIG_CONNECT_MAX
+}dm_dig_connect_e;
+
+typedef enum tag_dig_packetdetection_threshold_definition
+{
+	DIG_PD_AT_LOW_POWER = 0,
+	DIG_PD_AT_NORMAL_POWER = 1,
+	DIG_PD_AT_HIGH_POWER = 2,
+	DIG_PD_MAX
+}dm_dig_pd_th_e;
+
+typedef enum tag_dig_cck_cs_ratio_state_definition
+{
+	DIG_CS_RATIO_LOWER = 0,
+	DIG_CS_RATIO_HIGHER = 1,
+	DIG_CS_MAX
+}dm_dig_cs_ratio_e;
+typedef struct _Dynamic_Rx_Path_Selection_
+{
+	u8		Enable;
+	u8		DbgMode;
+	u8		cck_method;
+	u8		cck_Rx_path;
+
+	u8		SS_TH_low;
+	u8		diff_TH;
+	u8		disabledRF;
+	u8		reserved;
+
+	u8		rf_rssi[4];
+	u8		rf_enable_rssi_th[4];
+	long		cck_pwdb_sta[4];
+}DRxPathSel;
+
+typedef enum tag_CCK_Rx_Path_Method_Definition
+{
+	CCK_Rx_Version_1 = 0,
+	CCK_Rx_Version_2= 1,
+	CCK_Rx_Version_MAX
+}DM_CCK_Rx_Path_Method;
+
+typedef enum tag_DM_DbgMode_Definition
+{
+	DM_DBG_OFF = 0,
+	DM_DBG_ON = 1,
+	DM_DBG_MAX
+}DM_DBG_E;
+
+typedef struct tag_Tx_Config_Cmd_Format
+{
+	u32	Op;										/* Command packet type. */
+	u32	Length;									/* Command packet length. */
+	u32	Value;
+}DCMD_TXCMD_T, *PDCMD_TXCMD_T;
+/*------------------------------Define structure----------------------------*/
+
+
+/*------------------------Export global variable----------------------------*/
+extern	dig_t	dm_digtable;
+extern	u8		dm_shadow[16][256];
+extern DRxPathSel      DM_RxPathSelTable;
+/*------------------------Export global variable----------------------------*/
+
+
+/*------------------------Export Marco Definition---------------------------*/
+
+/*------------------------Export Marco Definition---------------------------*/
+
+
+/*--------------------------Exported Function prototype---------------------*/
+extern  void    init_hal_dm(struct net_device *dev);
+extern  void deinit_hal_dm(struct net_device *dev);
+
+extern void hal_dm_watchdog(struct net_device *dev);
+
+extern  void    init_rate_adaptive(struct net_device *dev);
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+extern  void    dm_txpower_trackingcallback(struct work_struct *work);
+#else
+extern  void    dm_txpower_trackingcallback(struct net_device *dev);
+#endif
+extern  void    dm_restore_dynamic_mechanism_state(struct net_device *dev);
+extern  void    dm_backup_dynamic_mechanism_state(struct net_device *dev);
+extern  void    dm_change_dynamic_initgain_thresh(struct net_device *dev,
+                                                                u32 dm_type, u32 dm_value);
+extern  void    dm_force_tx_fw_info(struct net_device *dev,u32 force_type, u32 force_value);
+extern  void    dm_init_edca_turbo(struct net_device *dev);
+extern  void    dm_rf_operation_test_callback(unsigned long data);
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+extern  void    dm_rf_pathcheck_workitemcallback(struct work_struct *work);
+#else
+extern  void    dm_rf_pathcheck_workitemcallback(struct net_device *dev);
+#endif
+extern  void dm_fsync_timer_callback(unsigned long data);
+extern	void	dm_cck_txpower_adjust(struct net_device *dev,bool  binch14);
+#if 0
+extern  char    dm_check_lbus_status(IN PADAPTER        Adapter);
+#endif
+extern  void    dm_shadow_init(struct net_device *dev);
+extern void dm_initialize_txpower_tracking(struct net_device *dev);
+/*--------------------------Exported Function prototype---------------------*/
+
+
+#endif	/*__R8192UDM_H__ */
+
+
+/* End of r8192U_dm.h */
+
diff --git a/drivers/staging/rtl8192su/r8192U_hw.h b/drivers/staging/rtl8192su/r8192U_hw.h
new file mode 100644
index 00000000000..f2500e654a7
--- /dev/null
+++ b/drivers/staging/rtl8192su/r8192U_hw.h
@@ -0,0 +1,746 @@
+/*
+	This is part of rtl8187 OpenSource driver.
+	Copyright (C) Andrea Merello 2004-2005  <andreamrl@tiscali.it>
+	Released under the terms of GPL (General Public Licence)
+
+	Parts of this driver are based on the GPL part of the
+	official Realtek driver.
+	Parts of this driver are based on the rtl8180 driver skeleton
+	from Patric Schenke & Andres Salomon.
+	Parts of this driver are based on the Intel Pro Wireless
+	2100 GPL driver.
+
+	We want to tanks the Authors of those projects
+	and the Ndiswrapper project Authors.
+*/
+
+/* Mariusz Matuszek added full registers definition with Realtek's name */
+
+/* this file contains register definitions for the rtl8187 MAC controller */
+#ifndef R8192_HW
+#define R8192_HW
+
+typedef enum _VERSION_819xU{
+	VERSION_819xU_A, // A-cut
+	VERSION_819xU_B, // B-cut
+	VERSION_819xU_C,// C-cut
+}VERSION_819xU,*PVERSION_819xU;
+//added for different RF type
+typedef enum _RT_RF_TYPE_DEF
+{
+	RF_1T2R = 0,
+	RF_2T4R,
+
+	RF_819X_MAX_TYPE
+}RT_RF_TYPE_DEF;
+
+
+typedef enum _BaseBand_Config_Type{
+	BaseBand_Config_PHY_REG = 0,			//Radio Path A
+	BaseBand_Config_AGC_TAB = 1,			//Radio Path B
+}BaseBand_Config_Type, *PBaseBand_Config_Type;
+#if 0
+typedef enum _RT_RF_TYPE_819xU{
+	RF_TYPE_MIN = 0,
+	RF_8225,
+	RF_8256,
+	RF_8258,
+	RF_PSEUDO_11N = 4,
+}RT_RF_TYPE_819xU, *PRT_RF_TYPE_819xU;
+#endif
+#define	RTL8187_REQT_READ	0xc0
+#define	RTL8187_REQT_WRITE	0x40
+#define	RTL8187_REQ_GET_REGS	0x05
+#define	RTL8187_REQ_SET_REGS	0x05
+
+#define MAX_TX_URB 16  //less URB will cause 2.4.31 crash, need to fix it further
+#define MAX_RX_URB 16
+
+#define R8180_MAX_RETRY 255
+//#define MAX_RX_NORMAL_URB 3
+//#define MAX_RX_COMMAND_URB 2
+#define RX_URB_SIZE 9100
+
+#define BB_ANTATTEN_CHAN14	0x0c
+#define BB_ANTENNA_B 0x40
+
+#define BB_HOST_BANG (1<<30)
+#define BB_HOST_BANG_EN (1<<2)
+#define BB_HOST_BANG_CLK (1<<1)
+#define BB_HOST_BANG_RW (1<<3)
+#define BB_HOST_BANG_DATA	 1
+
+//#if (RTL819X_FPGA_VER & RTL819X_FPGA_VIVI_070920)
+#define AFR			0x010
+#define AFR_CardBEn		(1<<0)
+#define AFR_CLKRUN_SEL		(1<<1)
+#define AFR_FuncRegEn		(1<<2)
+#define RTL8190_EEPROM_ID	0x8129
+#define EEPROM_VID		0x02
+#define EEPROM_PID		0x04
+#define EEPROM_NODE_ADDRESS_BYTE_0	0x0C
+
+#define EEPROM_TxPowerDiff	0x1F
+#define EEPROM_ThermalMeter	0x20
+#define EEPROM_PwDiff		0x21	//0x21
+#define EEPROM_CrystalCap	0x22	//0x22
+
+#define EEPROM_TxPwIndex_CCK	0x23	//0x23
+#define EEPROM_TxPwIndex_OFDM_24G	0x24	//0x24~0x26
+#define EEPROM_TxPwIndex_CCK_V1		0x29	//0x29~0x2B
+#define EEPROM_TxPwIndex_OFDM_24G_V1	0x2C	//0x2C~0x2E
+#define EEPROM_TxPwIndex_Ver		0x27	//0x27
+
+#define EEPROM_Default_TxPowerDiff		0x0
+#define EEPROM_Default_ThermalMeter		0x7
+#define EEPROM_Default_PwDiff			0x4
+#define EEPROM_Default_CrystalCap		0x5
+#define EEPROM_Default_TxPower			0x1010
+#define EEPROM_Customer_ID			0x7B	//0x7B:CustomerID
+#define EEPROM_ChannelPlan			0x16	//0x7C
+#define EEPROM_IC_VER				0x7d	//0x7D
+#define EEPROM_CRC				0x7e	//0x7E~0x7F
+
+#define EEPROM_CID_DEFAULT			0x0
+#define EEPROM_CID_CAMEO				0x1
+#define EEPROM_CID_RUNTOP				0x2
+#define EEPROM_CID_Senao				0x3
+#define EEPROM_CID_TOSHIBA				0x4	// Toshiba setting, Merge by Jacken, 2008/01/31
+#define EEPROM_CID_NetCore				0x5
+#define EEPROM_CID_Nettronix			0x6
+#define EEPROM_CID_Pronet				0x7
+#define EEPROM_CID_DLINK				0x8
+
+#define AC_PARAM_TXOP_LIMIT_OFFSET	16
+#define AC_PARAM_ECW_MAX_OFFSET		12
+#define AC_PARAM_ECW_MIN_OFFSET		8
+#define AC_PARAM_AIFS_OFFSET		0
+
+//#endif
+enum _RTL8192Usb_HW {
+
+	PCIF			= 0x009, // PCI Function Register 0x0009h~0x000bh
+#define	BB_GLOBAL_RESET_BIT	0x1
+	BB_GLOBAL_RESET		= 0x020, // BasebandGlobal Reset Register
+	BSSIDR			= 0x02E, // BSSID Register
+	CMDR			= 0x037, // Command register
+#define CR_RST			0x10
+#define CR_RE			0x08
+#define CR_TE			0x04
+#define CR_MulRW		0x01
+	SIFS			= 0x03E, // SIFS register
+	TCR			= 0x040, // Transmit Configuration Register
+
+#define TCR_MXDMA_2048 		7
+#define TCR_LRL_OFFSET		0
+#define TCR_SRL_OFFSET		8
+#define TCR_MXDMA_OFFSET	21
+#define TCR_SAT			BIT24		// Enable Rate depedent ack timeout timer
+	RCR			= 0x044, // Receive Configuration Register
+#define MAC_FILTER_MASK ((1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<5) | \
+		(1<<12) | (1<<18) | (1<<19) | (1<<20) | (1<<21) | (1<<22) | (1<<23))
+#define RX_FIFO_THRESHOLD_MASK ((1<<13) | (1<<14) | (1<<15))
+#define RX_FIFO_THRESHOLD_SHIFT 13
+#define RX_FIFO_THRESHOLD_128 3
+#define RX_FIFO_THRESHOLD_256 4
+#define RX_FIFO_THRESHOLD_512 5
+#define RX_FIFO_THRESHOLD_1024 6
+#define RX_FIFO_THRESHOLD_NONE 7
+#define MAX_RX_DMA_MASK ((1<<8) | (1<<9) | (1<<10))
+#define RCR_MXDMA_OFFSET	8
+#define RCR_FIFO_OFFSET		13
+#define RCR_ONLYERLPKT		BIT31			// Early Receiving based on Packet Size.
+#define RCR_ENCS2		BIT30			// Enable Carrier Sense Detection Method 2
+#define RCR_ENCS1		BIT29			// Enable Carrier Sense Detection Method 1
+#define RCR_ENMBID		BIT27			// Enable Multiple BssId.
+#define RCR_ACKTXBW		(BIT24|BIT25)		// TXBW Setting of ACK frames
+#define RCR_CBSSID		BIT23			// Accept BSSID match packet
+#define RCR_APWRMGT		BIT22			// Accept power management packet
+#define	RCR_ADD3		BIT21			// Accept address 3 match packet
+#define RCR_AMF			BIT20			// Accept management type frame
+#define RCR_ACF			BIT19			// Accept control type frame
+#define RCR_ADF			BIT18			// Accept data type frame
+#define RCR_RXFTH		BIT13			// Rx FIFO Threshold
+#define RCR_AICV		BIT12			// Accept ICV error packet
+#define	RCR_ACRC32		BIT5			// Accept CRC32 error packet
+#define	RCR_AB			BIT3			// Accept broadcast packet
+#define	RCR_AM			BIT2			// Accept multicast packet
+#define	RCR_APM			BIT1			// Accept physical match packet
+#define	RCR_AAP			BIT0			// Accept all unicast packet
+	SLOT_TIME		= 0x049, // Slot Time Register
+	ACK_TIMEOUT		= 0x04c, // Ack Timeout Register
+	PIFS_TIME		= 0x04d, // PIFS time
+	USTIME			= 0x04e, // Microsecond Tuning Register, Sets the microsecond time unit used by MAC clock.
+	EDCAPARA_BE		= 0x050, // EDCA Parameter of AC BE
+	EDCAPARA_BK		= 0x054, // EDCA Parameter of AC BK
+	EDCAPARA_VO		= 0x058, // EDCA Parameter of AC VO
+	EDCAPARA_VI		= 0x05C, // EDCA Parameter of AC VI
+	RFPC			= 0x05F, // Rx FIFO Packet Count
+	CWRR			= 0x060, // Contention Window Report Register
+	BCN_TCFG		= 0x062, // Beacon Time Configuration
+#define BCN_TCFG_CW_SHIFT		8
+#define BCN_TCFG_IFS			0
+	BCN_INTERVAL		= 0x070, // Beacon Interval (TU)
+	ATIMWND			= 0x072, // ATIM Window Size (TU)
+	BCN_DRV_EARLY_INT	= 0x074, // Driver Early Interrupt Time (TU). Time to send interrupt to notify to change beacon content before TBTT
+	BCN_DMATIME		= 0x076, // Beacon DMA and ATIM interrupt time (US). Indicates the time before TBTT to perform beacon queue DMA
+	BCN_ERR_THRESH		= 0x078, // Beacon Error Threshold
+	RWCAM			= 0x0A0, //IN 8190 Data Sheet is called CAMcmd
+	WCAMI			= 0x0A4, // Software write CAM input content
+	RCAMO			= 0x0A8, // Software read/write CAM config
+	SECR			= 0x0B0, //Security Configuration Register
+#define	SCR_TxUseDK		BIT0			//Force Tx Use Default Key
+#define SCR_RxUseDK		BIT1			//Force Rx Use Default Key
+#define SCR_TxEncEnable		BIT2			//Enable Tx Encryption
+#define SCR_RxDecEnable		BIT3			//Enable Rx Decryption
+#define SCR_SKByA2		BIT4			//Search kEY BY A2
+#define SCR_NoSKMC		BIT5			//No Key Search for Multicast
+#define SCR_UseDK		0x01
+#define SCR_TxSecEnable		0x02
+#define SCR_RxSecEnable		0x04
+	TPPoll			= 0x0fd, // Transmit priority polling register
+	PSR			= 0x0ff, // Page Select Register
+#define CPU_CCK_LOOPBACK	0x00030000
+#define CPU_GEN_SYSTEM_RESET	0x00000001
+#define CPU_GEN_FIRMWARE_RESET	0x00000008
+#define CPU_GEN_BOOT_RDY	0x00000010
+#define CPU_GEN_FIRM_RDY	0x00000020
+#define CPU_GEN_PUT_CODE_OK	0x00000080
+#define CPU_GEN_BB_RST		0x00000100
+#define CPU_GEN_PWR_STB_CPU	0x00000004
+#define CPU_GEN_NO_LOOPBACK_MSK	0xFFF8FFFF		// Set bit18,17,16 to 0. Set bit19
+#define CPU_GEN_NO_LOOPBACK_SET	0x00080000		// Set BIT19 to 1
+
+//----------------------------------------------------------------------------
+//       8190 CPU General Register		(offset 0x100, 4 byte)
+//----------------------------------------------------------------------------
+#define	CPU_CCK_LOOPBACK	0x00030000
+#define	CPU_GEN_SYSTEM_RESET	0x00000001
+#define	CPU_GEN_FIRMWARE_RESET	0x00000008
+#define	CPU_GEN_BOOT_RDY	0x00000010
+#define	CPU_GEN_FIRM_RDY	0x00000020
+#define	CPU_GEN_PUT_CODE_OK	0x00000080
+#define	CPU_GEN_BB_RST		0x00000100
+#define	CPU_GEN_PWR_STB_CPU	0x00000004
+#define CPU_GEN_NO_LOOPBACK_MSK	0xFFF8FFFF // Set bit18,17,16 to 0. Set bit19
+#define CPU_GEN_NO_LOOPBACK_SET	0x00080000 // Set BIT19 to 1
+	CPU_GEN			= 0x100, // CPU Reset Register
+	LED1Cfg			=		0x154,// LED1 Configuration Register
+ 	LED0Cfg			=		0x155,// LED0 Configuration Register
+
+	AcmAvg			= 0x170, // ACM Average Period Register
+	AcmHwCtrl		= 0x171, // ACM Hardware Control Register
+//----------------------------------------------------------------------------
+////
+////       8190 AcmHwCtrl bits                                    (offset 0x171, 1 byte)
+////----------------------------------------------------------------------------
+//
+#define AcmHw_HwEn              BIT0
+#define AcmHw_BeqEn             BIT1
+#define AcmHw_ViqEn             BIT2
+#define AcmHw_VoqEn             BIT3
+#define AcmHw_BeqStatus         BIT4
+#define AcmHw_ViqStatus         BIT5
+#define AcmHw_VoqStatus         BIT6
+
+	AcmFwCtrl		= 0x172, // ACM Firmware Control Register
+	AES_11N_FIX		= 0x173,
+	VOAdmTime		= 0x174, // VO Queue Admitted Time Register
+	VIAdmTime		= 0x178, // VI Queue Admitted Time Register
+	BEAdmTime		= 0x17C, // BE Queue Admitted Time Register
+	RQPN1			= 0x180, // Reserved Queue Page Number , Vo Vi, Be, Bk
+	RQPN2			= 0x184, // Reserved Queue Page Number, HCCA, Cmd, Mgnt, High
+	RQPN3			= 0x188, // Reserved Queue Page Number, Bcn, Public,
+//	QPRR			= 0x1E0, // Queue Page Report per TID
+	QPNR			= 0x1D0, //0x1F0, // Queue Packet Number report per TID
+	BQDA			= 0x200, // Beacon Queue Descriptor Address
+	HQDA			= 0x204, // High Priority Queue Descriptor Address
+	CQDA			= 0x208, // Command Queue Descriptor Address
+	MQDA			= 0x20C, // Management Queue Descriptor Address
+	HCCAQDA			= 0x210, // HCCA Queue Descriptor Address
+	VOQDA			= 0x214, // VO Queue Descriptor Address
+	VIQDA			= 0x218, // VI Queue Descriptor Address
+	BEQDA			= 0x21C, // BE Queue Descriptor Address
+	BKQDA			= 0x220, // BK Queue Descriptor Address
+	RCQDA			= 0x224, // Receive command Queue Descriptor Address
+	RDQDA			= 0x228, // Receive Queue Descriptor Start Address
+
+	MAR0			= 0x240, // Multicast filter.
+	MAR4			= 0x244,
+
+	CCX_PERIOD		= 0x250, // CCX Measurement Period Register, in unit of TU.
+	CLM_RESULT		= 0x251, // CCA Busy fraction register.
+	NHM_PERIOD		= 0x252, // NHM Measurement Period register, in unit of TU.
+
+	NHM_THRESHOLD0		= 0x253, // Noise Histogram Meashorement0.
+	NHM_THRESHOLD1		= 0x254, // Noise Histogram Meashorement1.
+	NHM_THRESHOLD2		= 0x255, // Noise Histogram Meashorement2.
+	NHM_THRESHOLD3		= 0x256, // Noise Histogram Meashorement3.
+	NHM_THRESHOLD4		= 0x257, // Noise Histogram Meashorement4.
+	NHM_THRESHOLD5		= 0x258, // Noise Histogram Meashorement5.
+	NHM_THRESHOLD6		= 0x259, // Noise Histogram Meashorement6
+
+	MCTRL			= 0x25A, // Measurement Control
+
+	NHM_RPI_COUNTER0	= 0x264, // Noise Histogram RPI counter0, the fraction of signal strength < NHM_THRESHOLD0.
+	NHM_RPI_COUNTER1	= 0x265, // Noise Histogram RPI counter1, the fraction of signal strength in (NHM_THRESHOLD0, NHM_THRESHOLD1].
+	NHM_RPI_COUNTER2	= 0x266, // Noise Histogram RPI counter2, the fraction of signal strength in (NHM_THRESHOLD1, NHM_THRESHOLD2].
+	NHM_RPI_COUNTER3	= 0x267, // Noise Histogram RPI counter3, the fraction of signal strength in (NHM_THRESHOLD2, NHM_THRESHOLD3].
+	NHM_RPI_COUNTER4	= 0x268, // Noise Histogram RPI counter4, the fraction of signal strength in (NHM_THRESHOLD3, NHM_THRESHOLD4].
+	NHM_RPI_COUNTER5	= 0x269, // Noise Histogram RPI counter5, the fraction of signal strength in (NHM_THRESHOLD4, NHM_THRESHOLD5].
+	NHM_RPI_COUNTER6	= 0x26A, // Noise Histogram RPI counter6, the fraction of signal strength in (NHM_THRESHOLD5, NHM_THRESHOLD6].
+	NHM_RPI_COUNTER7	= 0x26B, // Noise Histogram RPI counter7, the fraction of signal strength in (NHM_THRESHOLD6, NHM_THRESHOLD7].
+#define	BW_OPMODE_11J			BIT0
+#define	BW_OPMODE_5G			BIT1
+#define	BW_OPMODE_20MHZ			BIT2
+	BW_OPMODE		= 0x300, // Bandwidth operation mode
+	MSR			= 0x303, // Media Status register
+#define MSR_LINK_MASK      ((1<<0)|(1<<1))
+#define MSR_LINK_MANAGED   2
+#define MSR_LINK_NONE      0
+#define MSR_LINK_SHIFT     0
+#define MSR_LINK_ADHOC     1
+#define MSR_LINK_MASTER    3
+#define MSR_LINK_ENEDCA	   (1<<4)
+	RETRY_LIMIT		= 0x304, // Retry Limit [15:8]-short, [7:0]-long
+#define RETRY_LIMIT_SHORT_SHIFT 8
+#define RETRY_LIMIT_LONG_SHIFT 0
+	TSFR			= 0x308,
+	RRSR			= 0x310, // Response Rate Set
+#define RRSR_RSC_OFFSET			21
+#define RRSR_SHORT_OFFSET			23
+#define RRSR_RSC_DUPLICATE			0x600000
+#define RRSR_RSC_LOWSUBCHNL		0x400000
+#define RRSR_RSC_UPSUBCHANL		0x200000
+#define RRSR_SHORT					0x800000
+#define RRSR_1M						BIT0
+#define RRSR_2M						BIT1
+#define RRSR_5_5M					BIT2
+#define RRSR_11M					BIT3
+#define RRSR_6M						BIT4
+#define RRSR_9M						BIT5
+#define RRSR_12M					BIT6
+#define RRSR_18M					BIT7
+#define RRSR_24M					BIT8
+#define RRSR_36M					BIT9
+#define RRSR_48M					BIT10
+#define RRSR_54M					BIT11
+#define RRSR_MCS0					BIT12
+#define RRSR_MCS1					BIT13
+#define RRSR_MCS2					BIT14
+#define RRSR_MCS3					BIT15
+#define RRSR_MCS4					BIT16
+#define RRSR_MCS5					BIT17
+#define RRSR_MCS6					BIT18
+#define RRSR_MCS7					BIT19
+#define BRSR_AckShortPmb			BIT23		// CCK ACK: use Short Preamble or not.
+	RATR0			= 0x320, // Rate Adaptive Table register1
+	UFWP			= 0x318,
+	DRIVER_RSSI		= 0x32c,					// Driver tell Firmware current RSSI
+//----------------------------------------------------------------------------
+//       8190 Rate Adaptive Table Register	(offset 0x320, 4 byte)
+//----------------------------------------------------------------------------
+//CCK
+#define	RATR_1M			0x00000001
+#define	RATR_2M			0x00000002
+#define	RATR_55M		0x00000004
+#define	RATR_11M		0x00000008
+//OFDM
+#define	RATR_6M			0x00000010
+#define	RATR_9M			0x00000020
+#define	RATR_12M		0x00000040
+#define	RATR_18M		0x00000080
+#define	RATR_24M		0x00000100
+#define	RATR_36M		0x00000200
+#define	RATR_48M		0x00000400
+#define	RATR_54M		0x00000800
+//MCS 1 Spatial Stream
+#define	RATR_MCS0		0x00001000
+#define	RATR_MCS1		0x00002000
+#define	RATR_MCS2		0x00004000
+#define	RATR_MCS3		0x00008000
+#define	RATR_MCS4		0x00010000
+#define	RATR_MCS5		0x00020000
+#define	RATR_MCS6		0x00040000
+#define	RATR_MCS7		0x00080000
+//MCS 2 Spatial Stream
+#define	RATR_MCS8		0x00100000
+#define	RATR_MCS9		0x00200000
+#define	RATR_MCS10		0x00400000
+#define	RATR_MCS11		0x00800000
+#define	RATR_MCS12		0x01000000
+#define	RATR_MCS13		0x02000000
+#define	RATR_MCS14		0x04000000
+#define	RATR_MCS15		0x08000000
+// ALL CCK Rate
+#define RATE_ALL_CCK		RATR_1M|RATR_2M|RATR_55M|RATR_11M
+#define RATE_ALL_OFDM_AG	RATR_6M|RATR_9M|RATR_12M|RATR_18M|RATR_24M\
+							|RATR_36M|RATR_48M|RATR_54M
+#define RATE_ALL_OFDM_1SS	RATR_MCS0|RATR_MCS1|RATR_MCS2|RATR_MCS3 | \
+							RATR_MCS4|RATR_MCS5|RATR_MCS6|RATR_MCS7
+#define RATE_ALL_OFDM_2SS	RATR_MCS8|RATR_MCS9	|RATR_MCS10|RATR_MCS11| \
+							RATR_MCS12|RATR_MCS13|RATR_MCS14|RATR_MCS15
+
+	MCS_TXAGC		= 0x340, // MCS AGC
+	CCK_TXAGC		= 0x348, // CCK AGC
+//	ISR			= 0x350, // Interrupt Status Register
+//	IMR			= 0x354, // Interrupt Mask Register
+//	IMR_POLL		= 0x360,
+	MacBlkCtrl		= 0x403, // Mac block on/off control register
+
+	EPROM_CMD 		= 0xfe58,
+#define Cmd9346CR_9356SEL	(1<<4)
+#define EPROM_CMD_RESERVED_MASK (1<<5)
+#define EPROM_CMD_OPERATING_MODE_SHIFT 6
+#define EPROM_CMD_OPERATING_MODE_MASK ((1<<7)|(1<<6))
+#define EPROM_CMD_CONFIG 0x3
+#define EPROM_CMD_NORMAL 0
+#define EPROM_CMD_LOAD 1
+#define EPROM_CMD_PROGRAM 2
+#define EPROM_CS_SHIFT 3
+#define EPROM_CK_SHIFT 2
+#define EPROM_W_SHIFT 1
+#define EPROM_R_SHIFT 0
+	MAC0 			= 0x000,
+	MAC1 			= 0x001,
+	MAC2 			= 0x002,
+	MAC3 			= 0x003,
+	MAC4 			= 0x004,
+	MAC5 			= 0x005,
+
+#if 0
+/* 0x0006 - 0x0007 - reserved */
+	RXFIFOCOUNT 		= 0x010,
+	TXFIFOCOUNT 		= 0x012,
+	BQREQ 			= 0x013,
+/* 0x0010 - 0x0017 - reserved */
+	TSFTR 			= 0x018,
+	TLPDA 			= 0x020,
+	TNPDA 			= 0x024,
+	THPDA 			= 0x028,
+	BSSID 			= 0x02E,
+	RESP_RATE 		= 0x034,
+	CMD 			= 0x037,
+#define CMD_RST_SHIFT 4
+#define CMD_RESERVED_MASK ((1<<1) | (1<<5) | (1<<6) | (1<<7))
+#define CMD_RX_ENABLE_SHIFT 3
+#define CMD_TX_ENABLE_SHIFT 2
+#define CR_RST      ((1<< 4))
+#define CR_RE       ((1<< 3))
+#define CR_TE       ((1<< 2))
+#define CR_MulRW    ((1<< 0))
+
+	INTA_MASK 		= 0x03c,
+	INTA 			= 0x03e,
+#define INTA_TXOVERFLOW (1<<15)
+#define INTA_TIMEOUT (1<<14)
+#define INTA_BEACONTIMEOUT (1<<13)
+#define INTA_ATIM (1<<12)
+#define INTA_BEACONDESCERR (1<<11)
+#define INTA_BEACONDESCOK (1<<10)
+#define INTA_HIPRIORITYDESCERR (1<<9)
+#define INTA_HIPRIORITYDESCOK (1<<8)
+#define INTA_NORMPRIORITYDESCERR (1<<7)
+#define INTA_NORMPRIORITYDESCOK (1<<6)
+#define INTA_RXOVERFLOW (1<<5)
+#define INTA_RXDESCERR (1<<4)
+#define INTA_LOWPRIORITYDESCERR (1<<3)
+#define INTA_LOWPRIORITYDESCOK (1<<2)
+#define INTA_RXCRCERR (1<<1)
+#define INTA_RXOK (1)
+	TX_CONF 		= 0x040,
+#define TX_CONF_HEADER_AUTOICREMENT_SHIFT 30
+#define TX_LOOPBACK_SHIFT 17
+#define TX_LOOPBACK_MAC 1
+#define TX_LOOPBACK_BASEBAND 2
+#define TX_LOOPBACK_NONE 0
+#define TX_LOOPBACK_CONTINUE 3
+#define TX_LOOPBACK_MASK ((1<<17)|(1<<18))
+#define TX_LRLRETRY_SHIFT 0
+#define TX_SRLRETRY_SHIFT 8
+#define TX_NOICV_SHIFT 19
+#define TX_NOCRC_SHIFT 16
+#define TCR_DurProcMode  ((1<<30))
+#define TCR_DISReqQsize  ((1<<28))
+#define TCR_HWVERID_MASK ((1<<27)|(1<<26)|(1<<25))
+#define TCR_HWVERID_SHIFT 25
+#define TCR_SWPLCPLEN     ((1<<24))
+#define TCR_PLCP_LEN TCR_SAT // rtl8180
+#define TCR_MXDMA_MASK   ((1<<23)|(1<<22)|(1<<21))
+#define TCR_MXDMA_1024 6
+#define TCR_MXDMA_2048 7
+#define TCR_MXDMA_SHIFT  21
+#define TCR_DISCW   ((1<<20))
+#define TCR_ICV     ((1<<19))
+#define TCR_LBK     ((1<<18)|(1<<17))
+#define TCR_LBK1    ((1<<18))
+#define TCR_LBK0    ((1<<17))
+#define TCR_CRC     ((1<<16))
+#define TCR_SRL_MASK   ((1<<15)|(1<<14)|(1<<13)|(1<<12)|(1<<11)|(1<<10)|(1<<9)|(1<<8))
+#define TCR_LRL_MASK   ((1<<0)|(1<<1)|(1<<2)|(1<<3)|(1<<4)|(1<<5)|(1<<6)|(1<<7))
+#define TCR_PROBE_NOTIMESTAMP_SHIFT 29 //rtl8185
+	RX_CONF 		= 0x044,
+#define MAC_FILTER_MASK ((1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<5) | \
+(1<<12) | (1<<18) | (1<<19) | (1<<20) | (1<<21) | (1<<22) | (1<<23))
+#define RX_CHECK_BSSID_SHIFT 23
+#define ACCEPT_PWR_FRAME_SHIFT 22
+#define ACCEPT_MNG_FRAME_SHIFT 20
+#define ACCEPT_CTL_FRAME_SHIFT 19
+#define ACCEPT_DATA_FRAME_SHIFT 18
+#define ACCEPT_ICVERR_FRAME_SHIFT 12
+#define ACCEPT_CRCERR_FRAME_SHIFT 5
+#define ACCEPT_BCAST_FRAME_SHIFT 3
+#define ACCEPT_MCAST_FRAME_SHIFT 2
+#define ACCEPT_ALLMAC_FRAME_SHIFT 0
+#define ACCEPT_NICMAC_FRAME_SHIFT 1
+#define RX_FIFO_THRESHOLD_MASK ((1<<13) | (1<<14) | (1<<15))
+#define RX_FIFO_THRESHOLD_SHIFT 13
+#define RX_FIFO_THRESHOLD_128 3
+#define RX_FIFO_THRESHOLD_256 4
+#define RX_FIFO_THRESHOLD_512 5
+#define RX_FIFO_THRESHOLD_1024 6
+#define RX_FIFO_THRESHOLD_NONE 7
+#define RX_AUTORESETPHY_SHIFT 28
+#define MAX_RX_DMA_MASK ((1<<8) | (1<<9) | (1<<10))
+#define MAX_RX_DMA_2048 7
+#define MAX_RX_DMA_1024	6
+#define MAX_RX_DMA_SHIFT 10
+#define RCR_ONLYERLPKT ((1<<31))
+#define RCR_CS_SHIFT   29
+#define RCR_CS_MASK    ((1<<30) | (1<<29))
+#define RCR_ENMARP     ((1<<28))
+#define RCR_CBSSID     ((1<<23))
+#define RCR_APWRMGT    ((1<<22))
+#define RCR_ADD3       ((1<<21))
+#define RCR_AMF        ((1<<20))
+#define RCR_ACF        ((1<<19))
+#define RCR_ADF        ((1<<18))
+#define RCR_RXFTH      ((1<<15)|(1<<14)|(1<<13))
+#define RCR_RXFTH2     ((1<<15))
+#define RCR_RXFTH1     ((1<<14))
+#define RCR_RXFTH0     ((1<<13))
+#define RCR_AICV       ((1<<12))
+#define RCR_MXDMA      ((1<<10)|(1<< 9)|(1<< 8))
+#define RCR_MXDMA2     ((1<<10))
+#define RCR_MXDMA1     ((1<< 9))
+#define RCR_MXDMA0     ((1<< 8))
+#define RCR_9356SEL    ((1<< 6))
+#define RCR_ACRC32     ((1<< 5))
+#define RCR_AB         ((1<< 3))
+#define RCR_AM         ((1<< 2))
+#define RCR_APM        ((1<< 1))
+#define RCR_AAP        ((1<< 0))
+	INT_TIMEOUT 		= 0x048,
+	TX_BEACON_RING_ADDR 	= 0x04c,
+	EPROM_CMD 		= 0x58,
+#define EPROM_CMD_RESERVED_MASK ((1<<5)|(1<<4))
+#define EPROM_CMD_OPERATING_MODE_SHIFT 6
+#define EPROM_CMD_OPERATING_MODE_MASK ((1<<7)|(1<<6))
+#define EPROM_CMD_CONFIG 0x3
+#define EPROM_CMD_NORMAL 0
+#define EPROM_CMD_LOAD 1
+#define EPROM_CMD_PROGRAM 2
+#define EPROM_CS_SHIFT 3
+#define EPROM_CK_SHIFT 2
+#define EPROM_W_SHIFT 1
+#define EPROM_R_SHIFT 0
+	CONFIG0 		= 0x051,
+#define CONFIG0_WEP104     ((1<<6))
+#define CONFIG0_LEDGPO_En  ((1<<4))
+#define CONFIG0_Aux_Status ((1<<3))
+#define CONFIG0_GL         ((1<<1)|(1<<0))
+#define CONFIG0_GL1        ((1<<1))
+#define CONFIG0_GL0        ((1<<0))
+	CONFIG1 		= 0x052,
+#define CONFIG1_LEDS       ((1<<7)|(1<<6))
+#define CONFIG1_LEDS1      ((1<<7))
+#define CONFIG1_LEDS0      ((1<<6))
+#define CONFIG1_LWACT      ((1<<4))
+#define CONFIG1_MEMMAP     ((1<<3))
+#define CONFIG1_IOMAP      ((1<<2))
+#define CONFIG1_VPD        ((1<<1))
+#define CONFIG1_PMEn       ((1<<0))
+	CONFIG2 		= 0x053,
+#define CONFIG2_LCK        ((1<<7))
+#define CONFIG2_ANT        ((1<<6))
+#define CONFIG2_DPS        ((1<<3))
+#define CONFIG2_PAPE_sign  ((1<<2))
+#define CONFIG2_PAPE_time  ((1<<1)|(1<<0))
+#define CONFIG2_PAPE_time1 ((1<<1))
+#define CONFIG2_PAPE_time0 ((1<<0))
+	ANA_PARAM 		= 0x054,
+	CONFIG3 		= 0x059,
+#define CONFIG3_GNTSel     ((1<<7))
+#define CONFIG3_PARM_En    ((1<<6))
+#define CONFIG3_Magic      ((1<<5))
+#define CONFIG3_CardB_En   ((1<<3))
+#define CONFIG3_CLKRUN_En  ((1<<2))
+#define CONFIG3_FuncRegEn  ((1<<1))
+#define CONFIG3_FBtbEn     ((1<<0))
+#define CONFIG3_CLKRUN_SHIFT 2
+#define CONFIG3_ANAPARAM_W_SHIFT 6
+	CONFIG4 		= 0x05a,
+#define CONFIG4_VCOPDN     ((1<<7))
+#define CONFIG4_PWROFF     ((1<<6))
+#define CONFIG4_PWRMGT     ((1<<5))
+#define CONFIG4_LWPME      ((1<<4))
+#define CONFIG4_LWPTN      ((1<<2))
+#define CONFIG4_RFTYPE     ((1<<1)|(1<<0))
+#define CONFIG4_RFTYPE1    ((1<<1))
+#define CONFIG4_RFTYPE0    ((1<<0))
+	TESTR 			= 0x05b,
+#define TFPC_AC  0x05C
+
+#define SCR 0x05F
+	PGSELECT 		= 0x05e,
+#define PGSELECT_PG_SHIFT 0
+	SECURITY 		= 0x05f,
+#define SECURITY_WEP_TX_ENABLE_SHIFT 1
+#define SECURITY_WEP_RX_ENABLE_SHIFT 0
+#define SECURITY_ENCRYP_104 1
+#define SECURITY_ENCRYP_SHIFT 4
+#define SECURITY_ENCRYP_MASK ((1<<4)|(1<<5))
+	ANA_PARAM2 		= 0x060,
+	BEACON_INTERVAL 	= 0x070,
+#define BEACON_INTERVAL_MASK ((1<<0)|(1<<1)|(1<<2)|(1<<3)|(1<<4)|(1<<5)| \
+(1<<6)|(1<<7)|(1<<8)|(1<<9))
+	ATIM_WND 		= 0x072,
+#define ATIM_WND_MASK      (0x01FF)
+	BCN_INTR_ITV 		= 0x074,
+#define BCN_INTR_ITV_MASK  (0x01FF)
+	ATIM_INTR_ITV		= 0x076,
+#define ATIM_INTR_ITV_MASK  (0x01FF)
+	AckTimeOutReg      	= 0x079, //ACK timeout register, in unit of 4 us.
+	PHY_ADR 		= 0x07c,
+	PHY_READ 		= 0x07e,
+	RFPinsOutput 		= 0x080,
+	RFPinsEnable 		= 0x082,
+
+//Page 0
+	RFPinsSelect 		= 0x084,
+#define SW_CONTROL_GPIO 0x400
+	RFPinsInput 		= 0x086,
+	RF_PARA 		= 0x088,
+	RF_TIMING 		= 0x08c,
+	GP_ENABLE 		= 0x090,
+	GPIO 			= 0x091,
+	TX_AGC_CTL 		= 0x09c,
+#define TX_AGC_CTL_PER_PACKET_TXAGC	0x01
+#define TX_AGC_CTL_PERPACKET_GAIN_SHIFT 0
+#define TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT 1
+#define TX_AGC_CTL_FEEDBACK_ANT 2
+#define TXAGC_CTL_PER_PACKET_ANT_SEL 0x02
+	OFDM_TXAGC 		= 0x09e,
+	ANTSEL 			= 0x09f,
+	WPA_CONFIG 		= 0x0b0,
+	SIFS 			= 0x0b4,
+	DIFS 			= 0x0b5,
+	SLOT 			= 0x0b6,
+	CW_CONF 		= 0x0bc,
+#define CW_CONF_PERPACKET_RETRY_LIMIT 0x02
+#define CW_CONF_PERPACKET_CW 0x01
+#define CW_CONF_PERPACKET_RETRY_SHIFT 1
+#define CW_CONF_PERPACKET_CW_SHIFT 0
+	CW_VAL 			= 0x0bd,
+	RATE_FALLBACK 		= 0x0be,
+#define MAX_RESP_RATE_SHIFT 4
+#define MIN_RESP_RATE_SHIFT 0
+#define RATE_FALLBACK_CTL_ENABLE  0x80
+#define RATE_FALLBACK_CTL_AUTO_STEP0 0x00
+	ACM_CONTROL             = 0x0BF,      // ACM Control Registe
+//----------------------------------------------------------------------------
+//       8187B ACM_CONTROL bits						(Offset 0xBF, 1 Byte)
+//----------------------------------------------------------------------------
+#define VOQ_ACM_EN				(0x01 << 7) //BIT7
+#define VIQ_ACM_EN				(0x01 << 6) //BIT6
+#define BEQ_ACM_EN				(0x01 << 5) //BIT5
+#define ACM_HW_EN				(0x01 << 4) //BIT4
+#define TXOPSEL					(0x01 << 3) //BIT3
+#define VOQ_ACM_CTL				(0x01 << 2) //BIT2 // Set to 1 when AC_VO used time reaches or exceeds the admitted time
+#define VIQ_ACM_CTL				(0x01 << 1) //BIT1 // Set to 1 when AC_VI used time reaches or exceeds the admitted time
+#define BEQ_ACM_CTL				(0x01 << 0) //BIT0 // Set to 1 when AC_BE used time reaches or exceeds the admitted time
+	CONFIG5 		= 0x0D8,
+#define CONFIG5_TX_FIFO_OK ((1<<7))
+#define CONFIG5_RX_FIFO_OK ((1<<6))
+#define CONFIG5_CALON      ((1<<5))
+#define CONFIG5_EACPI      ((1<<2))
+#define CONFIG5_LANWake    ((1<<1))
+#define CONFIG5_PME_STS    ((1<<0))
+	TX_DMA_POLLING 		= 0x0d9,
+#define TX_DMA_POLLING_BEACON_SHIFT 7
+#define TX_DMA_POLLING_HIPRIORITY_SHIFT 6
+#define TX_DMA_POLLING_NORMPRIORITY_SHIFT 5
+#define TX_DMA_POLLING_LOWPRIORITY_SHIFT 4
+#define TX_DMA_STOP_BEACON_SHIFT 3
+#define TX_DMA_STOP_HIPRIORITY_SHIFT 2
+#define TX_DMA_STOP_NORMPRIORITY_SHIFT 1
+#define TX_DMA_STOP_LOWPRIORITY_SHIFT 0
+	CWR 			= 0x0DC,
+	RetryCTR 		= 0x0DE,
+	INT_MIG                 = 0x0E2,      // Interrupt Migration (0xE2 ~ 0xE3)
+	TID_AC_MAP         	= 0x0E8,     // TID to AC Mapping Register
+	ANA_PARAM3 		= 0x0EE,
+
+
+//page 1
+	Wakeup0 		= 0x084,
+	Wakeup1 		= 0x08C,
+	Wakeup2LD 		= 0x094,
+	Wakeup2HD 		= 0x09C,
+	Wakeup3LD 		= 0x0A4,
+	Wakeup3HD 		= 0x0AC,
+	Wakeup4LD 		= 0x0B4,
+	Wakeup4HD 		= 0x0BC,
+	CRC0 			= 0x0C4,
+	CRC1 			= 0x0C6,
+	CRC2 			= 0x0C8,
+	CRC3 			= 0x0CA,
+	CRC4 			= 0x0CC,
+/* 0x00CE - 0x00D3 - reserved */
+
+	RFSW_CTRL               = 0x272,   // 0x272-0x273.
+
+//Reg Diff between rtl8187 and rtl8187B
+/**************************************************************************/
+	BRSR_8187 		= 0x02C,
+	BRSR_8187B 		= 0x034,
+#define BRSR_BPLCP  ((1<< 8))
+#define BRSR_MBR    ((1<< 1)|(1<< 0))
+#define BRSR_MBR_8185 ((1<< 11)|(1<< 10)|(1<< 9)|(1<< 8)|(1<< 7)|(1<< 6)|(1<< 5)|(1<< 4)|(1<< 3)|(1<< 2)|(1<< 1)|(1<< 0))
+#define BRSR_MBR0   ((1<< 0))
+#define BRSR_MBR1   ((1<< 1))
+
+/**************************************************************************/
+	EIFS_8187  		= 0x035,
+	EIFS_8187B 		= 0x02D,
+
+/**************************************************************************/
+	FER 			= 0x0F0,
+	FEMR 			= 0x0F4,
+	FPSR 			= 0x0F8,
+	FFER 			= 0x0FC,
+
+	AC_VO_PARAM             = 0x0F0,      // AC_VO Parameters Record
+	AC_VI_PARAM             = 0x0F4,      // AC_VI Parameters Record
+	AC_BE_PARAM             = 0x0F8,      // AC_BE Parameters Record
+	AC_BK_PARAM             = 0x0FC,      // AC_BK Parameters Record
+	TALLY_SEL 		= 0x0fc,
+//----------------------------------------------------------------------------
+//       8187B AC_XX_PARAM bits
+//----------------------------------------------------------------------------
+#define AC_PARAM_TXOP_LIMIT_OFFSET		16
+#define AC_PARAM_ECW_MAX_OFFSET			12
+#define AC_PARAM_ECW_MIN_OFFSET			8
+#define AC_PARAM_AIFS_OFFSET			0
+
+#endif
+};
+//----------------------------------------------------------------------------
+//       818xB AnaParm & AnaParm2 Register
+//----------------------------------------------------------------------------
+//#define ANAPARM_ASIC_ON    0x45090658
+//#define ANAPARM2_ASIC_ON   0x727f3f52
+#define GPI 0x108
+#define GPO 0x109
+#define GPE 0x10a
+#endif
diff --git a/drivers/staging/rtl8192su/r8192U_pm.c b/drivers/staging/rtl8192su/r8192U_pm.c
new file mode 100644
index 00000000000..92c95aa3663
--- /dev/null
+++ b/drivers/staging/rtl8192su/r8192U_pm.c
@@ -0,0 +1,77 @@
+/*
+   Power management interface routines.
+   Written by Mariusz Matuszek.
+   This code is currently just a placeholder for later work and
+   does not do anything useful.
+
+   This is part of rtl8180 OpenSource driver.
+   Copyright (C) Andrea Merello 2004  <andreamrl@tiscali.it>
+   Released under the terms of GPL (General Public Licence)
+*/
+
+#ifdef CONFIG_RTL8192_PM
+#include "r8192U.h"
+#include "r8192U_pm.h"
+
+/*****************************************************************************/
+int rtl8192U_save_state (struct pci_dev *dev, u32 state)
+{
+	printk(KERN_NOTICE "r8192U save state call (state %u).\n", state);
+	return(-EAGAIN);
+}
+
+int rtl8192U_suspend(struct usb_interface *intf, pm_message_t state)
+{
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	struct net_device *dev = usb_get_intfdata(intf);
+#else
+	//struct net_device *dev = (struct net_device *)ptr;
+#endif
+	RT_TRACE(COMP_POWER, "============> r8192U suspend call.\n");
+
+	if(dev) {
+		 if (!netif_running(dev)) {
+		      printk(KERN_WARNING "netif not running, go out suspend function\n");
+		      return 0;
+		 }
+
+		dev->stop(dev);
+		mdelay(10);
+
+		netif_device_detach(dev);
+	}
+
+	return 0;
+}
+
+int rtl8192U_resume (struct usb_interface *intf)
+{
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	struct net_device *dev = usb_get_intfdata(intf);
+#else
+	//struct net_device *dev = (struct net_device *)ptr;
+#endif
+
+	RT_TRACE(COMP_POWER, "================>r8192U resume call.");
+
+	if(dev) {
+		if (!netif_running(dev)){
+			printk(KERN_WARNING "netif not running, go out resume function\n");
+			return 0;
+		}
+
+		netif_device_attach(dev);
+		dev->open(dev);
+	}
+
+        return 0;
+}
+
+int rtl8192U_enable_wake (struct pci_dev *dev, u32 state, int enable)
+{
+	printk(KERN_NOTICE "r8192U enable wake call (state %u, enable %d).\n",
+			state, enable);
+	return(-EAGAIN);
+}
+
+#endif //CONFIG_RTL8192_PM
diff --git a/drivers/staging/rtl8192su/r8192U_pm.h b/drivers/staging/rtl8192su/r8192U_pm.h
new file mode 100644
index 00000000000..ab025d64f5e
--- /dev/null
+++ b/drivers/staging/rtl8192su/r8192U_pm.h
@@ -0,0 +1,27 @@
+/*
+        Power management interface routines.
+	Written by Mariusz Matuszek.
+	This code is currently just a placeholder for later work and
+	does not do anything useful.
+
+	This is part of rtl8180 OpenSource driver.
+	Copyright (C) Andrea Merello 2004  <andreamrl@tiscali.it>
+	Released under the terms of GPL (General Public Licence)
+
+*/
+
+#ifdef CONFIG_RTL8192_PM
+
+#ifndef R8192_PM_H
+#define R8192_PM_H
+
+#include <linux/types.h>
+#include <linux/usb.h>
+
+int rtl8192U_save_tate (struct pci_dev *dev, u32 state);
+int rtl8192U_suspend(struct usb_interface *intf, pm_message_t state);
+int rtl8192U_resume (struct usb_interface *intf);
+int rtl8192U_enable_wake (struct pci_dev *dev, u32 state, int enable);
+
+#endif //R8192U_PM_H
+#endif // CONFIG_RTL8192_PM
diff --git a/drivers/staging/rtl8192su/r8192U_wx.c b/drivers/staging/rtl8192su/r8192U_wx.c
new file mode 100644
index 00000000000..f9eafb16dbb
--- /dev/null
+++ b/drivers/staging/rtl8192su/r8192U_wx.c
@@ -0,0 +1,1350 @@
+/*
+   This file contains wireless extension handlers.
+
+   This is part of rtl8180 OpenSource driver.
+   Copyright (C) Andrea Merello 2004-2005  <andreamrl@tiscali.it>
+   Released under the terms of GPL (General Public Licence)
+
+   Parts of this driver are based on the GPL part
+   of the official realtek driver.
+
+   Parts of this driver are based on the rtl8180 driver skeleton
+   from Patric Schenke & Andres Salomon.
+
+   Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.
+
+   We want to tanks the Authors of those projects and the Ndiswrapper
+   project Authors.
+*/
+
+#ifdef RTL8192SU
+#include <linux/string.h>
+#include "r8192U.h"
+#include "r8192S_hw.h"
+#else
+#include <linux/string.h>
+#include "r8192U.h"
+#include "r8192U_hw.h"
+#endif
+
+#ifdef ENABLE_DOT11D
+#include "dot11d.h"
+#endif
+
+#define RATE_COUNT 12
+u32 rtl8180_rates[] = {1000000,2000000,5500000,11000000,
+	6000000,9000000,12000000,18000000,24000000,36000000,48000000,54000000};
+
+
+#ifndef ENETDOWN
+#define ENETDOWN 1
+#endif
+
+static int r8192_wx_get_freq(struct net_device *dev,
+			     struct iw_request_info *a,
+			     union iwreq_data *wrqu, char *b)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	return ieee80211_wx_get_freq(priv->ieee80211,a,wrqu,b);
+}
+
+
+#if 0
+
+static int r8192_wx_set_beaconinterval(struct net_device *dev, struct iw_request_info *aa,
+			  union iwreq_data *wrqu, char *b)
+{
+	int *parms = (int *)b;
+	int bi = parms[0];
+
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	down(&priv->wx_sem);
+	DMESG("setting beacon interval to %x",bi);
+
+	priv->ieee80211->beacon_interval=bi;
+	rtl8180_commit(dev);
+	up(&priv->wx_sem);
+
+	return 0;
+}
+
+
+static int r8192_wx_set_forceassociate(struct net_device *dev, struct iw_request_info *aa,
+			  union iwreq_data *wrqu, char *extra)
+{
+	struct r8192_priv *priv=ieee80211_priv(dev);
+	int *parms = (int *)extra;
+
+	priv->ieee80211->force_associate = (parms[0] > 0);
+
+
+	return 0;
+}
+
+#endif
+static int r8192_wx_get_mode(struct net_device *dev, struct iw_request_info *a,
+			     union iwreq_data *wrqu, char *b)
+{
+	struct r8192_priv *priv=ieee80211_priv(dev);
+
+	return ieee80211_wx_get_mode(priv->ieee80211,a,wrqu,b);
+}
+
+
+
+static int r8192_wx_get_rate(struct net_device *dev,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	return ieee80211_wx_get_rate(priv->ieee80211,info,wrqu,extra);
+}
+
+
+
+static int r8192_wx_set_rate(struct net_device *dev,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra)
+{
+	int ret;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	down(&priv->wx_sem);
+
+	ret = ieee80211_wx_set_rate(priv->ieee80211,info,wrqu,extra);
+
+	up(&priv->wx_sem);
+
+	return ret;
+}
+
+
+static int r8192_wx_set_rts(struct net_device *dev,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra)
+{
+	int ret;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	down(&priv->wx_sem);
+
+	ret = ieee80211_wx_set_rts(priv->ieee80211,info,wrqu,extra);
+
+	up(&priv->wx_sem);
+
+	return ret;
+}
+
+static int r8192_wx_get_rts(struct net_device *dev,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	return ieee80211_wx_get_rts(priv->ieee80211,info,wrqu,extra);
+}
+
+static int r8192_wx_set_power(struct net_device *dev,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra)
+{
+	int ret;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	down(&priv->wx_sem);
+
+	ret = ieee80211_wx_set_power(priv->ieee80211,info,wrqu,extra);
+
+	up(&priv->wx_sem);
+
+	return ret;
+}
+
+static int r8192_wx_get_power(struct net_device *dev,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	return ieee80211_wx_get_power(priv->ieee80211,info,wrqu,extra);
+}
+
+#ifdef JOHN_IOCTL
+u16 read_rtl8225(struct net_device *dev, u8 addr);
+void write_rtl8225(struct net_device *dev, u8 adr, u16 data);
+u32 john_read_rtl8225(struct net_device *dev, u8 adr);
+void _write_rtl8225(struct net_device *dev, u8 adr, u16 data);
+
+static int r8192_wx_read_regs(struct net_device *dev,
+			       struct iw_request_info *info,
+			       union iwreq_data *wrqu, char *extra)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u8 addr;
+	u16 data1;
+
+	down(&priv->wx_sem);
+
+
+	get_user(addr,(u8*)wrqu->data.pointer);
+	data1 = read_rtl8225(dev, addr);
+	wrqu->data.length = data1;
+
+	up(&priv->wx_sem);
+	return 0;
+
+}
+
+static int r8192_wx_write_regs(struct net_device *dev,
+			       struct iw_request_info *info,
+			       union iwreq_data *wrqu, char *extra)
+{
+        struct r8192_priv *priv = ieee80211_priv(dev);
+        u8 addr;
+
+        down(&priv->wx_sem);
+
+        get_user(addr, (u8*)wrqu->data.pointer);
+	write_rtl8225(dev, addr, wrqu->data.length);
+
+        up(&priv->wx_sem);
+	return 0;
+
+}
+
+void rtl8187_write_phy(struct net_device *dev, u8 adr, u32 data);
+u8 rtl8187_read_phy(struct net_device *dev,u8 adr, u32 data);
+
+static int r8192_wx_read_bb(struct net_device *dev,
+			       struct iw_request_info *info,
+			       union iwreq_data *wrqu, char *extra)
+{
+        struct r8192_priv *priv = ieee80211_priv(dev);
+	u8 databb;
+#if 0
+	int i;
+	for(i=0;i<12;i++) printk("%8x\n", read_cam(dev, i) );
+#endif
+
+        down(&priv->wx_sem);
+
+	databb = rtl8187_read_phy(dev, (u8)wrqu->data.length, 0x00000000);
+	wrqu->data.length = databb;
+
+	up(&priv->wx_sem);
+	return 0;
+}
+
+void rtl8187_write_phy(struct net_device *dev, u8 adr, u32 data);
+static int r8192_wx_write_bb(struct net_device *dev,
+                               struct iw_request_info *info,
+                               union iwreq_data *wrqu, char *extra)
+{
+        struct r8192_priv *priv = ieee80211_priv(dev);
+        u8 databb;
+
+        down(&priv->wx_sem);
+
+        get_user(databb, (u8*)wrqu->data.pointer);
+        rtl8187_write_phy(dev, wrqu->data.length, databb);
+
+        up(&priv->wx_sem);
+        return 0;
+
+}
+
+
+static int r8192_wx_write_nicb(struct net_device *dev,
+                               struct iw_request_info *info,
+                               union iwreq_data *wrqu, char *extra)
+{
+        struct r8192_priv *priv = ieee80211_priv(dev);
+        u32 addr;
+
+        down(&priv->wx_sem);
+
+        get_user(addr, (u32*)wrqu->data.pointer);
+        write_nic_byte(dev, addr, wrqu->data.length);
+
+        up(&priv->wx_sem);
+        return 0;
+
+}
+static int r8192_wx_read_nicb(struct net_device *dev,
+                               struct iw_request_info *info,
+                               union iwreq_data *wrqu, char *extra)
+{
+        struct r8192_priv *priv = ieee80211_priv(dev);
+        u32 addr;
+        u16 data1;
+
+        down(&priv->wx_sem);
+
+        get_user(addr,(u32*)wrqu->data.pointer);
+        data1 = read_nic_byte(dev, addr);
+        wrqu->data.length = data1;
+
+        up(&priv->wx_sem);
+        return 0;
+}
+
+static int r8192_wx_get_ap_status(struct net_device *dev,
+                               struct iw_request_info *info,
+                               union iwreq_data *wrqu, char *extra)
+{
+        struct r8192_priv *priv = ieee80211_priv(dev);
+        struct ieee80211_device *ieee = priv->ieee80211;
+        struct ieee80211_network *target;
+	int name_len;
+
+        down(&priv->wx_sem);
+
+	//count the length of input ssid
+	for(name_len=0 ; ((char*)wrqu->data.pointer)[name_len]!='\0' ; name_len++);
+
+	//search for the correspoding info which is received
+        list_for_each_entry(target, &ieee->network_list, list) {
+                if ( (target->ssid_len == name_len) &&
+		     (strncmp(target->ssid, (char*)wrqu->data.pointer, name_len)==0)){
+			if(target->wpa_ie_len>0 || target->rsn_ie_len>0 )
+				//set flags=1 to indicate this ap is WPA
+				wrqu->data.flags = 1;
+			else wrqu->data.flags = 0;
+
+
+		break;
+                }
+        }
+
+        up(&priv->wx_sem);
+        return 0;
+}
+
+
+
+#endif
+#if 0
+static int r8192_wx_null(struct net_device *dev,
+		struct iw_request_info *info,
+		union iwreq_data *wrqu, char *extra)
+{
+	return 0;
+}
+#endif
+static int r8192_wx_force_reset(struct net_device *dev,
+		struct iw_request_info *info,
+		union iwreq_data *wrqu, char *extra)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	down(&priv->wx_sem);
+
+	printk("%s(): force reset ! extra is %d\n",__FUNCTION__, *extra);
+	priv->force_reset = *extra;
+	up(&priv->wx_sem);
+	return 0;
+
+}
+
+#ifdef RTL8192SU
+static int r8191su_wx_get_firm_version(struct net_device *dev,
+		struct iw_request_info *info,
+		struct iw_param *wrqu, char *extra)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u16 firmware_version;
+
+	down(&priv->wx_sem);
+	firmware_version = priv->pFirmware->FirmwareVersion;
+	wrqu->value = firmware_version;
+	wrqu->fixed = 1;
+
+	up(&priv->wx_sem);
+	return 0;
+}
+#endif
+
+
+
+static int r8192_wx_set_rawtx(struct net_device *dev,
+			       struct iw_request_info *info,
+			       union iwreq_data *wrqu, char *extra)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	int ret;
+
+	down(&priv->wx_sem);
+
+	ret = ieee80211_wx_set_rawtx(priv->ieee80211, info, wrqu, extra);
+
+	up(&priv->wx_sem);
+
+	return ret;
+
+}
+
+static int r8192_wx_set_crcmon(struct net_device *dev,
+			       struct iw_request_info *info,
+			       union iwreq_data *wrqu, char *extra)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	int *parms = (int *)extra;
+	int enable = (parms[0] > 0);
+	short prev = priv->crcmon;
+
+	down(&priv->wx_sem);
+
+	if(enable)
+		priv->crcmon=1;
+	else
+		priv->crcmon=0;
+
+	DMESG("bad CRC in monitor mode are %s",
+	      priv->crcmon ? "accepted" : "rejected");
+
+	if(prev != priv->crcmon && priv->up){
+		//rtl8180_down(dev);
+		//rtl8180_up(dev);
+	}
+
+	up(&priv->wx_sem);
+
+	return 0;
+}
+
+static int r8192_wx_set_mode(struct net_device *dev, struct iw_request_info *a,
+			     union iwreq_data *wrqu, char *b)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	int ret;
+	down(&priv->wx_sem);
+
+	ret = ieee80211_wx_set_mode(priv->ieee80211,a,wrqu,b);
+
+	rtl8192_set_rxconf(dev);
+
+	up(&priv->wx_sem);
+	return ret;
+}
+
+struct  iw_range_with_scan_capa
+{
+        /* Informative stuff (to choose between different interface) */
+        __u32           throughput;     /* To give an idea... */
+        /* In theory this value should be the maximum benchmarked
+         * TCP/IP throughput, because with most of these devices the
+         * bit rate is meaningless (overhead an co) to estimate how
+         * fast the connection will go and pick the fastest one.
+         * I suggest people to play with Netperf or any benchmark...
+         */
+
+        /* NWID (or domain id) */
+        __u32           min_nwid;       /* Minimal NWID we are able to set */
+        __u32           max_nwid;       /* Maximal NWID we are able to set */
+
+        /* Old Frequency (backward compat - moved lower ) */
+        __u16           old_num_channels;
+        __u8            old_num_frequency;
+
+        /* Scan capabilities */
+        __u8            scan_capa;
+};
+static int rtl8180_wx_get_range(struct net_device *dev,
+				struct iw_request_info *info,
+				union iwreq_data *wrqu, char *extra)
+{
+	struct iw_range *range = (struct iw_range *)extra;
+	struct iw_range_with_scan_capa* tmp = (struct iw_range_with_scan_capa*)range;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u16 val;
+	int i;
+
+	wrqu->data.length = sizeof(*range);
+	memset(range, 0, sizeof(*range));
+
+	/* Let's try to keep this struct in the same order as in
+	 * linux/include/wireless.h
+	 */
+
+	/* TODO: See what values we can set, and remove the ones we can't
+	 * set, or fill them with some default data.
+	 */
+
+	/* ~5 Mb/s real (802.11b) */
+	range->throughput = 5 * 1000 * 1000;
+
+	// TODO: Not used in 802.11b?
+//	range->min_nwid;	/* Minimal NWID we are able to set */
+	// TODO: Not used in 802.11b?
+//	range->max_nwid;	/* Maximal NWID we are able to set */
+
+        /* Old Frequency (backward compat - moved lower ) */
+//	range->old_num_channels;
+//	range->old_num_frequency;
+//	range->old_freq[6]; /* Filler to keep "version" at the same offset */
+	if(priv->rf_set_sens != NULL)
+		range->sensitivity = priv->max_sens;	/* signal level threshold range */
+
+	range->max_qual.qual = 100;
+	/* TODO: Find real max RSSI and stick here */
+	range->max_qual.level = 0;
+	range->max_qual.noise = -98;
+	range->max_qual.updated = 7; /* Updated all three */
+
+	range->avg_qual.qual = 92; /* > 8% missed beacons is 'bad' */
+	/* TODO: Find real 'good' to 'bad' threshol value for RSSI */
+	range->avg_qual.level = 20 + -98;
+	range->avg_qual.noise = 0;
+	range->avg_qual.updated = 7; /* Updated all three */
+
+	range->num_bitrates = RATE_COUNT;
+
+	for (i = 0; i < RATE_COUNT && i < IW_MAX_BITRATES; i++) {
+		range->bitrate[i] = rtl8180_rates[i];
+	}
+
+	range->min_frag = MIN_FRAG_THRESHOLD;
+	range->max_frag = MAX_FRAG_THRESHOLD;
+
+	range->min_pmp=0;
+	range->max_pmp = 5000000;
+	range->min_pmt = 0;
+	range->max_pmt = 65535*1000;
+	range->pmp_flags = IW_POWER_PERIOD;
+	range->pmt_flags = IW_POWER_TIMEOUT;
+	range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_ALL_R;
+
+	range->we_version_compiled = WIRELESS_EXT;
+	range->we_version_source = 16;
+
+//	range->retry_capa;	/* What retry options are supported */
+//	range->retry_flags;	/* How to decode max/min retry limit */
+//	range->r_time_flags;	/* How to decode max/min retry life */
+//	range->min_retry;	/* Minimal number of retries */
+//	range->max_retry;	/* Maximal number of retries */
+//	range->min_r_time;	/* Minimal retry lifetime */
+//	range->max_r_time;	/* Maximal retry lifetime */
+
+
+	for (i = 0, val = 0; i < 14; i++) {
+
+		// Include only legal frequencies for some countries
+#ifdef ENABLE_DOT11D
+		if ((GET_DOT11D_INFO(priv->ieee80211)->channel_map)[i+1]) {
+#else
+		if ((priv->ieee80211->channel_map)[i+1]) {
+#endif
+		        range->freq[val].i = i + 1;
+			range->freq[val].m = ieee80211_wlan_frequencies[i] * 100000;
+			range->freq[val].e = 1;
+			val++;
+		} else {
+			// FIXME: do we need to set anything for channels
+			// we don't use ?
+		}
+
+		if (val == IW_MAX_FREQUENCIES)
+		break;
+	}
+	range->num_frequency = val;
+        range->num_channels = val;
+#if WIRELESS_EXT > 17
+	range->enc_capa = IW_ENC_CAPA_WPA|IW_ENC_CAPA_WPA2|
+			  IW_ENC_CAPA_CIPHER_TKIP|IW_ENC_CAPA_CIPHER_CCMP;
+#endif
+	tmp->scan_capa = 0x01;
+	return 0;
+}
+
+
+static int r8192_wx_set_scan(struct net_device *dev, struct iw_request_info *a,
+			     union iwreq_data *wrqu, char *b)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	struct ieee80211_device* ieee = priv->ieee80211;
+	int ret = 0;
+
+	if(!priv->up) return -ENETDOWN;
+
+	if (priv->ieee80211->LinkDetectInfo.bBusyTraffic == true)
+		return -EAGAIN;
+#if WIRELESS_EXT > 17
+	if (wrqu->data.flags & IW_SCAN_THIS_ESSID)
+	{
+		struct iw_scan_req* req = (struct iw_scan_req*)b;
+		if (req->essid_len)
+		{
+			//printk("==**&*&*&**===>scan set ssid:%s\n", req->essid);
+			ieee->current_network.ssid_len = req->essid_len;
+			memcpy(ieee->current_network.ssid, req->essid, req->essid_len);
+			//printk("=====>network ssid:%s\n", ieee->current_network.ssid);
+		}
+	}
+#endif
+
+	down(&priv->wx_sem);
+	if(priv->ieee80211->state != IEEE80211_LINKED){
+                priv->ieee80211->scanning = 0;
+                ieee80211_softmac_scan_syncro(priv->ieee80211);
+                ret = 0;
+        }
+	else
+	ret = ieee80211_wx_set_scan(priv->ieee80211,a,wrqu,b);
+	up(&priv->wx_sem);
+	return ret;
+}
+
+
+static int r8192_wx_get_scan(struct net_device *dev, struct iw_request_info *a,
+			     union iwreq_data *wrqu, char *b)
+{
+
+	int ret;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	if(!priv->up) return -ENETDOWN;
+
+	down(&priv->wx_sem);
+
+	ret = ieee80211_wx_get_scan(priv->ieee80211,a,wrqu,b);
+
+	up(&priv->wx_sem);
+
+	return ret;
+}
+
+static int r8192_wx_set_essid(struct net_device *dev,
+			      struct iw_request_info *a,
+			      union iwreq_data *wrqu, char *b)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	int ret;
+	down(&priv->wx_sem);
+
+	ret = ieee80211_wx_set_essid(priv->ieee80211,a,wrqu,b);
+
+	up(&priv->wx_sem);
+
+	return ret;
+}
+
+
+
+
+static int r8192_wx_get_essid(struct net_device *dev,
+			      struct iw_request_info *a,
+			      union iwreq_data *wrqu, char *b)
+{
+	int ret;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	down(&priv->wx_sem);
+
+	ret = ieee80211_wx_get_essid(priv->ieee80211, a, wrqu, b);
+
+	up(&priv->wx_sem);
+
+	return ret;
+}
+
+
+static int r8192_wx_set_freq(struct net_device *dev, struct iw_request_info *a,
+			     union iwreq_data *wrqu, char *b)
+{
+	int ret;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	down(&priv->wx_sem);
+
+	ret = ieee80211_wx_set_freq(priv->ieee80211, a, wrqu, b);
+
+	up(&priv->wx_sem);
+	return ret;
+}
+
+static int r8192_wx_get_name(struct net_device *dev,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	return ieee80211_wx_get_name(priv->ieee80211, info, wrqu, extra);
+}
+
+
+static int r8192_wx_set_frag(struct net_device *dev,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	if (wrqu->frag.disabled)
+		priv->ieee80211->fts = DEFAULT_FRAG_THRESHOLD;
+	else {
+		if (wrqu->frag.value < MIN_FRAG_THRESHOLD ||
+		    wrqu->frag.value > MAX_FRAG_THRESHOLD)
+			return -EINVAL;
+
+		priv->ieee80211->fts = wrqu->frag.value & ~0x1;
+	}
+
+	return 0;
+}
+
+
+static int r8192_wx_get_frag(struct net_device *dev,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	wrqu->frag.value = priv->ieee80211->fts;
+	wrqu->frag.fixed = 0;	/* no auto select */
+	wrqu->frag.disabled = (wrqu->frag.value == DEFAULT_FRAG_THRESHOLD);
+
+	return 0;
+}
+
+
+static int r8192_wx_set_wap(struct net_device *dev,
+			 struct iw_request_info *info,
+			 union iwreq_data *awrq,
+			 char *extra)
+{
+
+	int ret;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+//        struct sockaddr *temp = (struct sockaddr *)awrq;
+	down(&priv->wx_sem);
+
+	ret = ieee80211_wx_set_wap(priv->ieee80211,info,awrq,extra);
+
+	up(&priv->wx_sem);
+
+	return ret;
+
+}
+
+
+static int r8192_wx_get_wap(struct net_device *dev,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu, char *extra)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	return ieee80211_wx_get_wap(priv->ieee80211,info,wrqu,extra);
+}
+
+
+static int r8192_wx_get_enc(struct net_device *dev,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu, char *key)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	return ieee80211_wx_get_encode(priv->ieee80211, info, wrqu, key);
+}
+
+static int r8192_wx_set_enc(struct net_device *dev,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu, char *key)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	struct ieee80211_device *ieee = priv->ieee80211;
+	int ret;
+
+	//u32 TargetContent;
+	u32 hwkey[4]={0,0,0,0};
+	u8 mask=0xff;
+	u32 key_idx=0;
+	//u8 broadcast_addr[6] ={	0xff,0xff,0xff,0xff,0xff,0xff};
+	u8 zero_addr[4][6] ={	{0x00,0x00,0x00,0x00,0x00,0x00},
+				{0x00,0x00,0x00,0x00,0x00,0x01},
+				{0x00,0x00,0x00,0x00,0x00,0x02},
+				{0x00,0x00,0x00,0x00,0x00,0x03} };
+	int i;
+
+       if(!priv->up) return -ENETDOWN;
+
+	down(&priv->wx_sem);
+
+	RT_TRACE(COMP_SEC, "Setting SW wep key");
+	ret = ieee80211_wx_set_encode(priv->ieee80211,info,wrqu,key);
+
+	up(&priv->wx_sem);
+
+
+
+	//sometimes, the length is zero while we do not type key value
+	if(wrqu->encoding.length!=0){
+
+		for(i=0 ; i<4 ; i++){
+			hwkey[i] |=  key[4*i+0]&mask;
+			if(i==1&&(4*i+1)==wrqu->encoding.length) mask=0x00;
+			if(i==3&&(4*i+1)==wrqu->encoding.length) mask=0x00;
+			hwkey[i] |= (key[4*i+1]&mask)<<8;
+			hwkey[i] |= (key[4*i+2]&mask)<<16;
+			hwkey[i] |= (key[4*i+3]&mask)<<24;
+		}
+
+		#define CONF_WEP40  0x4
+		#define CONF_WEP104 0x14
+
+		switch(wrqu->encoding.flags & IW_ENCODE_INDEX){
+			case 0: key_idx = ieee->tx_keyidx; break;
+			case 1:	key_idx = 0; break;
+			case 2:	key_idx = 1; break;
+			case 3:	key_idx = 2; break;
+			case 4:	key_idx	= 3; break;
+			default: break;
+		}
+
+		if(wrqu->encoding.length==0x5){
+				ieee->pairwise_key_type = KEY_TYPE_WEP40;
+			EnableHWSecurityConfig8192(dev);
+
+			setKey( dev,
+				key_idx,                //EntryNo
+				key_idx,                //KeyIndex
+				KEY_TYPE_WEP40,         //KeyType
+				zero_addr[key_idx],
+				0,                      //DefaultKey
+				hwkey);                 //KeyContent
+
+		}
+
+		else if(wrqu->encoding.length==0xd){
+				ieee->pairwise_key_type = KEY_TYPE_WEP104;
+				EnableHWSecurityConfig8192(dev);
+
+			setKey( dev,
+				key_idx,                //EntryNo
+				key_idx,                //KeyIndex
+				KEY_TYPE_WEP104,        //KeyType
+				zero_addr[key_idx],
+				0,                      //DefaultKey
+				hwkey);                 //KeyContent
+
+		}
+		else printk("wrong type in WEP, not WEP40 and WEP104\n");
+
+	}
+
+	return ret;
+}
+
+
+static int r8192_wx_set_scan_type(struct net_device *dev, struct iw_request_info *aa, union
+ iwreq_data *wrqu, char *p){
+
+ 	struct r8192_priv *priv = ieee80211_priv(dev);
+	int *parms=(int*)p;
+	int mode=parms[0];
+
+	priv->ieee80211->active_scan = mode;
+
+	return 1;
+}
+
+
+
+static int r8192_wx_set_retry(struct net_device *dev,
+				struct iw_request_info *info,
+				union iwreq_data *wrqu, char *extra)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	int err = 0;
+
+	down(&priv->wx_sem);
+
+	if (wrqu->retry.flags & IW_RETRY_LIFETIME ||
+	    wrqu->retry.disabled){
+		err = -EINVAL;
+		goto exit;
+	}
+	if (!(wrqu->retry.flags & IW_RETRY_LIMIT)){
+		err = -EINVAL;
+		goto exit;
+	}
+
+	if(wrqu->retry.value > R8180_MAX_RETRY){
+		err= -EINVAL;
+		goto exit;
+	}
+	if (wrqu->retry.flags & IW_RETRY_MAX) {
+		priv->retry_rts = wrqu->retry.value;
+		DMESG("Setting retry for RTS/CTS data to %d", wrqu->retry.value);
+
+	}else {
+		priv->retry_data = wrqu->retry.value;
+		DMESG("Setting retry for non RTS/CTS data to %d", wrqu->retry.value);
+	}
+
+	/* FIXME !
+	 * We might try to write directly the TX config register
+	 * or to restart just the (R)TX process.
+	 * I'm unsure if whole reset is really needed
+	 */
+
+ 	rtl8192_commit(dev);
+	/*
+	if(priv->up){
+		rtl8180_rtx_disable(dev);
+		rtl8180_rx_enable(dev);
+		rtl8180_tx_enable(dev);
+
+	}
+	*/
+exit:
+	up(&priv->wx_sem);
+
+	return err;
+}
+
+static int r8192_wx_get_retry(struct net_device *dev,
+				struct iw_request_info *info,
+				union iwreq_data *wrqu, char *extra)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+
+	wrqu->retry.disabled = 0; /* can't be disabled */
+
+	if ((wrqu->retry.flags & IW_RETRY_TYPE) ==
+	    IW_RETRY_LIFETIME)
+		return -EINVAL;
+
+	if (wrqu->retry.flags & IW_RETRY_MAX) {
+		wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_MAX;
+		wrqu->retry.value = priv->retry_rts;
+	} else {
+		wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_MIN;
+		wrqu->retry.value = priv->retry_data;
+	}
+	//printk("returning %d",wrqu->retry.value);
+
+
+	return 0;
+}
+
+static int r8192_wx_get_sens(struct net_device *dev,
+				struct iw_request_info *info,
+				union iwreq_data *wrqu, char *extra)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	if(priv->rf_set_sens == NULL)
+		return -1; /* we have not this support for this radio */
+	wrqu->sens.value = priv->sens;
+	return 0;
+}
+
+
+static int r8192_wx_set_sens(struct net_device *dev,
+				struct iw_request_info *info,
+				union iwreq_data *wrqu, char *extra)
+{
+
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	short err = 0;
+	down(&priv->wx_sem);
+	//DMESG("attempt to set sensivity to %ddb",wrqu->sens.value);
+	if(priv->rf_set_sens == NULL) {
+		err= -1; /* we have not this support for this radio */
+		goto exit;
+	}
+	if(priv->rf_set_sens(dev, wrqu->sens.value) == 0)
+		priv->sens = wrqu->sens.value;
+	else
+		err= -EINVAL;
+
+exit:
+	up(&priv->wx_sem);
+
+	return err;
+}
+
+#if (WIRELESS_EXT >= 18)
+#if 0
+static int r8192_wx_get_enc_ext(struct net_device *dev,
+                                        struct iw_request_info *info,
+                                        union iwreq_data *wrqu, char *extra)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	int ret = 0;
+	ret = ieee80211_wx_get_encode_ext(priv->ieee80211, info, wrqu, extra);
+	return ret;
+}
+#endif
+//hw security need to reorganized.
+static int r8192_wx_set_enc_ext(struct net_device *dev,
+                                        struct iw_request_info *info,
+                                        union iwreq_data *wrqu, char *extra)
+{
+	int ret=0;
+	#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	struct ieee80211_device* ieee = priv->ieee80211;
+	//printk("===>%s()\n", __FUNCTION__);
+
+
+	down(&priv->wx_sem);
+	ret = ieee80211_wx_set_encode_ext(priv->ieee80211, info, wrqu, extra);
+
+	{
+		u8 broadcast_addr[6] = {0xff,0xff,0xff,0xff,0xff,0xff};
+		u8 zero[6] = {0};
+		u32 key[4] = {0};
+		struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+		struct iw_point *encoding = &wrqu->encoding;
+#if 0
+		static u8 CAM_CONST_ADDR[4][6] = {
+			{0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
+			{0x00, 0x00, 0x00, 0x00, 0x00, 0x01},
+			{0x00, 0x00, 0x00, 0x00, 0x00, 0x02},
+			{0x00, 0x00, 0x00, 0x00, 0x00, 0x03}};
+#endif
+		u8 idx = 0, alg = 0, group = 0;
+		if ((encoding->flags & IW_ENCODE_DISABLED) ||
+		ext->alg == IW_ENCODE_ALG_NONE) //none is not allowed to use hwsec WB 2008.07.01
+		{
+			ieee->pairwise_key_type = ieee->group_key_type = KEY_TYPE_NA;
+			CamResetAllEntry(dev);
+			goto end_hw_sec;
+		}
+		alg =  (ext->alg == IW_ENCODE_ALG_CCMP)?KEY_TYPE_CCMP:ext->alg; // as IW_ENCODE_ALG_CCMP is defined to be 3 and KEY_TYPE_CCMP is defined to 4;
+		idx = encoding->flags & IW_ENCODE_INDEX;
+		if (idx)
+			idx --;
+		group = ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY;
+
+		if ((!group) || (IW_MODE_ADHOC == ieee->iw_mode) || (alg ==  KEY_TYPE_WEP40))
+		{
+			if ((ext->key_len == 13) && (alg == KEY_TYPE_WEP40) )
+				alg = KEY_TYPE_WEP104;
+			ieee->pairwise_key_type = alg;
+			EnableHWSecurityConfig8192(dev);
+		}
+		memcpy((u8*)key, ext->key, 16); //we only get 16 bytes key.why? WB 2008.7.1
+
+		if ((alg & KEY_TYPE_WEP40) && (ieee->auth_mode !=2) )
+		{
+
+			setKey( dev,
+					idx,//EntryNo
+					idx, //KeyIndex
+					alg,  //KeyType
+					zero, //MacAddr
+					0,              //DefaultKey
+					key);           //KeyContent
+		}
+		else if (group)
+		{
+			ieee->group_key_type = alg;
+			setKey( dev,
+					idx,//EntryNo
+					idx, //KeyIndex
+					alg,  //KeyType
+					broadcast_addr, //MacAddr
+					0,              //DefaultKey
+					key);           //KeyContent
+		}
+		else //pairwise key
+		{
+			setKey( dev,
+					4,//EntryNo
+					idx, //KeyIndex
+					alg,  //KeyType
+					(u8*)ieee->ap_mac_addr, //MacAddr
+					0,              //DefaultKey
+					key);           //KeyContent
+		}
+
+
+	}
+
+end_hw_sec:
+
+	up(&priv->wx_sem);
+#endif
+	return ret;
+
+}
+static int r8192_wx_set_auth(struct net_device *dev,
+                                        struct iw_request_info *info,
+                                        union iwreq_data *data, char *extra)
+{
+	int ret=0;
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	//printk("====>%s()\n", __FUNCTION__);
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	down(&priv->wx_sem);
+	ret = ieee80211_wx_set_auth(priv->ieee80211, info, &(data->param), extra);
+	up(&priv->wx_sem);
+#endif
+	return ret;
+}
+
+static int r8192_wx_set_mlme(struct net_device *dev,
+                                        struct iw_request_info *info,
+                                        union iwreq_data *wrqu, char *extra)
+{
+	//printk("====>%s()\n", __FUNCTION__);
+
+	int ret=0;
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	down(&priv->wx_sem);
+	ret = ieee80211_wx_set_mlme(priv->ieee80211, info, wrqu, extra);
+
+	up(&priv->wx_sem);
+#endif
+	return ret;
+}
+#endif
+static int r8192_wx_set_gen_ie(struct net_device *dev,
+                                        struct iw_request_info *info,
+                                        union iwreq_data *data, char *extra)
+{
+	   //printk("====>%s(), len:%d\n", __FUNCTION__, data->length);
+	int ret=0;
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+        struct r8192_priv *priv = ieee80211_priv(dev);
+        down(&priv->wx_sem);
+#if 1
+        ret = ieee80211_wx_set_gen_ie(priv->ieee80211, extra, data->data.length);
+#endif
+        up(&priv->wx_sem);
+	//printk("<======%s(), ret:%d\n", __FUNCTION__, ret);
+#endif
+        return ret;
+
+
+}
+
+static int dummy(struct net_device *dev, struct iw_request_info *a,
+		 union iwreq_data *wrqu,char *b)
+{
+	return -1;
+}
+
+
+static iw_handler r8192_wx_handlers[] =
+{
+        NULL,                     /* SIOCSIWCOMMIT */
+        r8192_wx_get_name,   	  /* SIOCGIWNAME */
+        dummy,                    /* SIOCSIWNWID */
+        dummy,                    /* SIOCGIWNWID */
+        r8192_wx_set_freq,        /* SIOCSIWFREQ */
+        r8192_wx_get_freq,        /* SIOCGIWFREQ */
+        r8192_wx_set_mode,        /* SIOCSIWMODE */
+        r8192_wx_get_mode,        /* SIOCGIWMODE */
+        r8192_wx_set_sens,        /* SIOCSIWSENS */
+        r8192_wx_get_sens,        /* SIOCGIWSENS */
+        NULL,                     /* SIOCSIWRANGE */
+        rtl8180_wx_get_range,	  /* SIOCGIWRANGE */
+        NULL,                     /* SIOCSIWPRIV */
+        NULL,                     /* SIOCGIWPRIV */
+        NULL,                     /* SIOCSIWSTATS */
+        NULL,                     /* SIOCGIWSTATS */
+        dummy,                    /* SIOCSIWSPY */
+        dummy,                    /* SIOCGIWSPY */
+        NULL,                     /* SIOCGIWTHRSPY */
+        NULL,                     /* SIOCWIWTHRSPY */
+        r8192_wx_set_wap,      	  /* SIOCSIWAP */
+        r8192_wx_get_wap,         /* SIOCGIWAP */
+#if (WIRELESS_EXT >= 18)
+        r8192_wx_set_mlme,                     /* MLME-- */
+#else
+	 NULL,
+#endif
+        dummy,                     /* SIOCGIWAPLIST -- depricated */
+        r8192_wx_set_scan,        /* SIOCSIWSCAN */
+        r8192_wx_get_scan,        /* SIOCGIWSCAN */
+        r8192_wx_set_essid,       /* SIOCSIWESSID */
+        r8192_wx_get_essid,       /* SIOCGIWESSID */
+        dummy,                    /* SIOCSIWNICKN */
+        dummy,                    /* SIOCGIWNICKN */
+        NULL,                     /* -- hole -- */
+        NULL,                     /* -- hole -- */
+        r8192_wx_set_rate,        /* SIOCSIWRATE */
+        r8192_wx_get_rate,        /* SIOCGIWRATE */
+        r8192_wx_set_rts,                    /* SIOCSIWRTS */
+        r8192_wx_get_rts,                    /* SIOCGIWRTS */
+        r8192_wx_set_frag,        /* SIOCSIWFRAG */
+        r8192_wx_get_frag,        /* SIOCGIWFRAG */
+        dummy,                    /* SIOCSIWTXPOW */
+        dummy,                    /* SIOCGIWTXPOW */
+        r8192_wx_set_retry,       /* SIOCSIWRETRY */
+        r8192_wx_get_retry,       /* SIOCGIWRETRY */
+        r8192_wx_set_enc,         /* SIOCSIWENCODE */
+        r8192_wx_get_enc,         /* SIOCGIWENCODE */
+        r8192_wx_set_power,                    /* SIOCSIWPOWER */
+        r8192_wx_get_power,                    /* SIOCGIWPOWER */
+	NULL,			/*---hole---*/
+	NULL, 			/*---hole---*/
+	r8192_wx_set_gen_ie,//NULL, 			/* SIOCSIWGENIE */
+	NULL, 			/* SIOCSIWGENIE */
+
+#if (WIRELESS_EXT >= 18)
+	r8192_wx_set_auth,//NULL, 			/* SIOCSIWAUTH */
+	NULL,//r8192_wx_get_auth,//NULL, 			/* SIOCSIWAUTH */
+	r8192_wx_set_enc_ext, 			/* SIOCSIWENCODEEXT */
+	NULL,//r8192_wx_get_enc_ext,//NULL, 			/* SIOCSIWENCODEEXT */
+#else
+	NULL,
+	NULL,
+	NULL,
+	NULL,
+#endif
+	NULL, 			/* SIOCSIWPMKSA */
+	NULL, 			 /*---hole---*/
+
+};
+
+
+static const struct iw_priv_args r8192_private_args[] = {
+
+	{
+		SIOCIWFIRSTPRIV + 0x0,
+		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "badcrc"
+	},
+
+	{
+		SIOCIWFIRSTPRIV + 0x1,
+		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "activescan"
+
+	},
+	{
+		SIOCIWFIRSTPRIV + 0x2,
+		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "rawtx"
+	}
+#ifdef JOHN_IOCTL
+	,
+	{
+		SIOCIWFIRSTPRIV + 0x3,
+                IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "readRF"
+	}
+	,
+	{
+		SIOCIWFIRSTPRIV + 0x4,
+                IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "writeRF"
+	}
+	,
+	{
+		SIOCIWFIRSTPRIV + 0x5,
+                IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "readBB"
+	}
+	,
+	{
+		SIOCIWFIRSTPRIV + 0x6,
+                IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "writeBB"
+	}
+        ,
+        {
+                SIOCIWFIRSTPRIV + 0x7,
+                IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "readnicb"
+        }
+        ,
+        {
+                SIOCIWFIRSTPRIV + 0x8,
+                IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "writenicb"
+        }
+        ,
+        {
+                SIOCIWFIRSTPRIV + 0x9,
+                IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "apinfo"
+        }
+
+#endif
+	,
+	{
+		SIOCIWFIRSTPRIV + 0x3,
+		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "forcereset"
+	}
+
+#ifdef RTL8192SU
+	,
+	{
+		SIOCIWFIRSTPRIV + 0x5,
+		IW_PRIV_TYPE_NONE, IW_PRIV_TYPE_INT|IW_PRIV_SIZE_FIXED|1,
+		"firm_ver"
+	}
+#endif
+};
+
+
+static iw_handler r8192_private_handler[] = {
+//	r8192_wx_set_monitor,  /* SIOCIWFIRSTPRIV */
+	r8192_wx_set_crcmon,   /*SIOCIWSECONDPRIV*/
+//	r8192_wx_set_forceassociate,
+//	r8192_wx_set_beaconinterval,
+//	r8192_wx_set_monitor_type,
+	r8192_wx_set_scan_type,
+	r8192_wx_set_rawtx,
+#ifdef JOHN_IOCTL
+	r8192_wx_read_regs,
+	r8192_wx_write_regs,
+	r8192_wx_read_bb,
+	r8192_wx_write_bb,
+        r8192_wx_read_nicb,
+        r8192_wx_write_nicb,
+	r8192_wx_get_ap_status,
+#endif
+	r8192_wx_force_reset,
+        (iw_handler)NULL,
+#ifdef RTL8192SU
+        (iw_handler)r8191su_wx_get_firm_version,
+#endif
+};
+
+//#if WIRELESS_EXT >= 17
+struct iw_statistics *r8192_get_wireless_stats(struct net_device *dev)
+{
+       struct r8192_priv *priv = ieee80211_priv(dev);
+	struct ieee80211_device* ieee = priv->ieee80211;
+	struct iw_statistics* wstats = &priv->wstats;
+	int tmp_level = 0;
+	int tmp_qual = 0;
+	int tmp_noise = 0;
+	if(ieee->state < IEEE80211_LINKED)
+	{
+		wstats->qual.qual = 0;
+		wstats->qual.level = 0;
+		wstats->qual.noise = 0;
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,14))
+		wstats->qual.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM;
+#else
+		wstats->qual.updated = 0x0f;
+#endif
+		return wstats;
+	}
+
+       tmp_level = (&ieee->current_network)->stats.rssi;
+	tmp_qual = (&ieee->current_network)->stats.signal;
+	tmp_noise = (&ieee->current_network)->stats.noise;
+	//printk("level:%d, qual:%d, noise:%d\n", tmp_level, tmp_qual, tmp_noise);
+
+	wstats->qual.level = tmp_level;
+	wstats->qual.qual = tmp_qual;
+	wstats->qual.noise = tmp_noise;
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,14))
+	wstats->qual.updated = IW_QUAL_ALL_UPDATED| IW_QUAL_DBM;
+#else
+        wstats->qual.updated = 0x0f;
+#endif
+	return wstats;
+}
+//#endif
+
+
+struct iw_handler_def  r8192_wx_handlers_def={
+	.standard = r8192_wx_handlers,
+	.num_standard = sizeof(r8192_wx_handlers) / sizeof(iw_handler),
+	.private = r8192_private_handler,
+	.num_private = sizeof(r8192_private_handler) / sizeof(iw_handler),
+ 	.num_private_args = sizeof(r8192_private_args) / sizeof(struct iw_priv_args),
+#if WIRELESS_EXT >= 17
+	.get_wireless_stats = r8192_get_wireless_stats,
+#endif
+	.private_args = (struct iw_priv_args *)r8192_private_args,
+};
diff --git a/drivers/staging/rtl8192su/r8192U_wx.h b/drivers/staging/rtl8192su/r8192U_wx.h
new file mode 100644
index 00000000000..b2f7a571b1c
--- /dev/null
+++ b/drivers/staging/rtl8192su/r8192U_wx.h
@@ -0,0 +1,23 @@
+/*
+	This is part of rtl8180 OpenSource driver - v 0.3
+	Copyright (C) Andrea Merello 2004  <andreamrl@tiscali.it>
+	Released under the terms of GPL (General Public Licence)
+
+	Parts of this driver are based on the GPL part of the official realtek driver
+	Parts of this driver are based on the rtl8180 driver skeleton from Patric Schenke & Andres Salomon
+	Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
+
+	We want to tanks the Authors of such projects and the Ndiswrapper project Authors.
+*/
+
+/* this file (will) contains wireless extension handlers*/
+
+#ifndef R8180_WX_H
+#define R8180_WX_H
+//#include <linux/wireless.h>
+//#include "ieee80211.h"
+extern struct iw_handler_def r8192_wx_handlers_def;
+/* Enable  the rtl819x_core.c to share this function, david 2008.9.22 */
+extern struct iw_statistics *r8192_get_wireless_stats(struct net_device *dev);
+
+#endif
diff --git a/drivers/staging/rtl8192su/r819xU_HTGen.h b/drivers/staging/rtl8192su/r819xU_HTGen.h
new file mode 100644
index 00000000000..7a60480c4b8
--- /dev/null
+++ b/drivers/staging/rtl8192su/r819xU_HTGen.h
@@ -0,0 +1,22 @@
+//
+// IOT Action for different AP
+//
+typedef enum _HT_IOT_ACTION{
+	HT_IOT_ACT_TX_USE_AMSDU_4K = 0x00000001,
+	HT_IOT_ACT_TX_USE_AMSDU_8K = 0x00000002,
+	HT_IOT_ACT_DECLARE_MCS13 = 0x00000004,
+	HT_IOT_ACT_DISABLE_EDCA_TURBO = 0x00000008,
+	HT_IOT_ACT_MGNT_USE_CCK_6M = 0x00000010,
+	HT_IOT_ACT_CDD_FSYNC = 0x00000020,
+	HT_IOT_ACT_PURE_N_MODE = 0x00000040,
+
+	//LZM ADD 090224
+	HT_IOT_ACT_EDCA_BIAS_ON_RX = 0x00004000,
+	HT_IOT_ACT_HYBRID_AGGREGATION = 0x00010000,
+	HT_IOT_ACT_AMSDU_ENABLE = 0x00000800,
+	HT_IOT_ACT_DISABLE_SHORT_GI = 0x00020000,
+	HT_IOT_ACT_DISABLE_HIGH_POWER = 0x00040000,
+	HT_IOT_ACT_DISABLE_TX_2SS = 0x00200000,
+	HT_IOT_ACT_DISABLE_TX_40_MHZ = 0x00080000,
+}HT_IOT_ACTION_E, *PHT_IOT_ACTION_E;
+
diff --git a/drivers/staging/rtl8192su/r819xU_HTType.h b/drivers/staging/rtl8192su/r819xU_HTType.h
new file mode 100644
index 00000000000..2994aa0876a
--- /dev/null
+++ b/drivers/staging/rtl8192su/r819xU_HTType.h
@@ -0,0 +1,392 @@
+#ifndef _R819XU_HTTYPE_H_
+#define _R819XU_HTTYPE_H_
+
+
+//------------------------------------------------------------
+// The HT Capability element is present in beacons, association request,
+//	reassociation request and probe response frames
+//------------------------------------------------------------
+
+//
+// Operation mode value
+//
+#define HT_OPMODE_NO_PROTECT		0
+#define HT_OPMODE_OPTIONAL		1
+#define HT_OPMODE_40MHZ_PROTECT	2
+#define HT_OPMODE_MIXED			3
+
+//
+// MIMO Power Save Setings
+//
+#define MIMO_PS_STATIC				0
+#define MIMO_PS_DYNAMIC			1
+#define MIMO_PS_NOLIMIT			3
+
+
+//
+//	There should be 128 bits to cover all of the MCS rates. However, since
+//	8190 does not support too much rates, one integer is quite enough.
+//
+
+#define sHTCLng	4
+
+
+#define HT_SUPPORTED_MCS_1SS_BITMAP					0x000000ff
+#define HT_SUPPORTED_MCS_2SS_BITMAP					0x0000ff00
+#define HT_SUPPORTED_MCS_1SS_2SS_BITMAP			HT_MCS_1SS_BITMAP|HT_MCS_1SS_2SS_BITMAP
+
+
+typedef enum _HT_MCS_RATE{
+	HT_MCS0   = 0x00000001,
+	HT_MCS1   = 0x00000002,
+	HT_MCS2   = 0x00000004,
+	HT_MCS3   = 0x00000008,
+	HT_MCS4   = 0x00000010,
+	HT_MCS5   = 0x00000020,
+	HT_MCS6   = 0x00000040,
+	HT_MCS7   = 0x00000080,
+	HT_MCS8   = 0x00000100,
+	HT_MCS9   = 0x00000200,
+	HT_MCS10 = 0x00000400,
+	HT_MCS11 = 0x00000800,
+	HT_MCS12 = 0x00001000,
+	HT_MCS13 = 0x00002000,
+	HT_MCS14 = 0x00004000,
+	HT_MCS15 = 0x00008000,
+	// Do not define MCS32 here although 8190 support MCS32
+}HT_MCS_RATE,*PHT_MCS_RATE;
+
+//
+// Represent Channel Width in HT Capabilities
+//
+typedef enum _HT_CHANNEL_WIDTH{
+	HT_CHANNEL_WIDTH_20 = 0,
+	HT_CHANNEL_WIDTH_20_40 = 1,
+}HT_CHANNEL_WIDTH, *PHT_CHANNEL_WIDTH;
+
+//
+// Represent Extention Channel Offset in HT Capabilities
+// This is available only in 40Mhz mode.
+//
+typedef enum _HT_EXTCHNL_OFFSET{
+	HT_EXTCHNL_OFFSET_NO_EXT = 0,
+	HT_EXTCHNL_OFFSET_UPPER = 1,
+	HT_EXTCHNL_OFFSET_NO_DEF = 2,
+	HT_EXTCHNL_OFFSET_LOWER = 3,
+}HT_EXTCHNL_OFFSET, *PHT_EXTCHNL_OFFSET;
+
+typedef enum _CHNLOP{
+	CHNLOP_NONE = 0, // No Action now
+	CHNLOP_SCAN = 1, // Scan in progress
+	CHNLOP_SWBW = 2, // Bandwidth switching in progress
+	CHNLOP_SWCHNL = 3, // Software Channel switching in progress
+} CHNLOP, *PCHNLOP;
+
+// Determine if the Channel Operation is in progress
+#define CHHLOP_IN_PROGRESS(_pHTInfo)	\
+		((_pHTInfo)->ChnlOp > CHNLOP_NONE) ? TRUE : FALSE
+
+
+typedef enum _HT_ACTION{
+	ACT_RECOMMAND_WIDTH		= 0,
+	ACT_MIMO_PWR_SAVE 		= 1,
+	ACT_PSMP					= 2,
+	ACT_SET_PCO_PHASE		= 3,
+	ACT_MIMO_CHL_MEASURE	= 4,
+	ACT_RECIPROCITY_CORRECT	= 5,
+	ACT_MIMO_CSI_MATRICS		= 6,
+	ACT_MIMO_NOCOMPR_STEER	= 7,
+	ACT_MIMO_COMPR_STEER		= 8,
+	ACT_ANTENNA_SELECT		= 9,
+} HT_ACTION, *PHT_ACTION;
+
+
+/* 2007/06/07 MH Define sub-carrier mode for 40MHZ. */
+typedef enum _HT_Bandwidth_40MHZ_Sub_Carrier{
+	SC_MODE_DUPLICATE = 0,
+	SC_MODE_LOWER = 1,
+	SC_MODE_UPPER = 2,
+	SC_MODE_FULL40MHZ = 3,
+}HT_BW40_SC_E;
+
+typedef	struct _HT_CAPABILITY_ELE{
+
+	//HT capability info
+	u8	AdvCoding:1;
+	u8	ChlWidth:1;
+	u8	MimoPwrSave:2;
+	u8	GreenField:1;
+	u8	ShortGI20Mhz:1;
+	u8	ShortGI40Mhz:1;
+	u8	TxSTBC:1;
+	u8	RxSTBC:2;
+	u8	DelayBA:1;
+	u8	MaxAMSDUSize:1;
+	u8	DssCCk:1;
+	u8	PSMP:1;
+	u8	Rsvd1:1;
+	u8	LSigTxopProtect:1;
+
+	//MAC HT parameters info
+	u8	MaxRxAMPDUFactor:2;
+	u8	MPDUDensity:3;
+	u8	Rsvd2:3;
+
+	//Supported MCS set
+	u8	MCS[16];
+
+
+	//Extended HT Capability Info
+	u16	ExtHTCapInfo;
+
+	//TXBF Capabilities
+	u8	TxBFCap[4];
+
+	//Antenna Selection Capabilities
+	u8	ASCap;
+
+}__attribute__((packed)) HT_CAPABILITY_ELE, *PHT_CAPABILITY_ELE;
+
+//------------------------------------------------------------
+// The HT Information element is present in beacons
+// Only AP is required to include this element
+//------------------------------------------------------------
+
+typedef struct _HT_INFORMATION_ELE{
+	u8	ControlChl;
+
+	u8	ExtChlOffset:2;
+	u8	RecommemdedTxWidth:1;
+	u8	RIFS:1;
+	u8	PSMPAccessOnly:1;
+	u8	SrvIntGranularity:3;
+
+	u8	OptMode:2;
+	u8	NonGFDevPresent:1;
+	u8	Revd1:5;
+	u8	Revd2:8;
+
+	u8	Rsvd3:6;
+	u8	DualBeacon:1;
+	u8	DualCTSProtect:1;
+
+	u8	SecondaryBeacon:1;
+	u8	LSigTxopProtectFull:1;
+	u8	PcoActive:1;
+	u8	PcoPhase:1;
+	u8	Rsvd4:4;
+
+	u8	BasicMSC[16];
+}__attribute__((packed)) HT_INFORMATION_ELE, *PHT_INFORMATION_ELE;
+
+//
+// MIMO Power Save control field.
+// This is appear in MIMO Power Save Action Frame
+//
+typedef struct _MIMOPS_CTRL{
+	u8	MimoPsEnable:1;
+	u8	MimoPsMode:1;
+	u8	Reserved:6;
+} MIMOPS_CTRL, *PMIMOPS_CTRL;
+
+typedef enum _HT_SPEC_VER{
+	HT_SPEC_VER_IEEE = 0,
+	HT_SPEC_VER_EWC = 1,
+}HT_SPEC_VER, *PHT_SPEC_VER;
+
+typedef enum _HT_AGGRE_MODE_E{
+	HT_AGG_AUTO = 0,
+	HT_AGG_FORCE_ENABLE = 1,
+	HT_AGG_FORCE_DISABLE = 2,
+}HT_AGGRE_MODE_E, *PHT_AGGRE_MODE_E;
+
+//------------------------------------------------------------
+//  The Data structure is used to keep HT related variables when card is
+//  configured as non-AP STA mode.  **Note**  Current_xxx should be set
+//	to default value in HTInitializeHTInfo()
+//------------------------------------------------------------
+
+typedef struct _RT_HIGH_THROUGHPUT{
+//	DECLARE_RT_OBJECT(_RT_HIGH_THROUGHPUT);
+	u8				bEnableHT;
+	u8				bCurrentHTSupport;
+
+	u8				bRegBW40MHz;				// Tx 40MHz channel capablity
+	u8				bCurBW40MHz;				// Tx 40MHz channel capability
+
+	u8				bRegShortGI40MHz;			// Tx Short GI for 40Mhz
+	u8				bCurShortGI40MHz;			// Tx Short GI for 40MHz
+
+	u8				bRegShortGI20MHz;			// Tx Short GI for 20MHz
+	u8				bCurShortGI20MHz;			// Tx Short GI for 20MHz
+
+	u8				bRegSuppCCK;				// Tx CCK rate capability
+	u8				bCurSuppCCK;				// Tx CCK rate capability
+
+	// 802.11n spec version for "peer"
+	HT_SPEC_VER			ePeerHTSpecVer;
+
+
+	// HT related information for "Self"
+	HT_CAPABILITY_ELE	SelfHTCap;					// This is HT cap element sent to peer STA, which also indicate HT Rx capabilities.
+	HT_INFORMATION_ELE	SelfHTInfo;					// This is HT info element sent to peer STA, which also indicate HT Rx capabilities.
+
+	// HT related information for "Peer"
+	u8				PeerHTCapBuf[32];
+	u8				PeerHTInfoBuf[32];
+
+
+	// A-MSDU related
+	u8				bAMSDU_Support;			// This indicates Tx A-MSDU capability
+	u16				nAMSDU_MaxSize;			// This indicates Tx A-MSDU capability
+	u8				bCurrent_AMSDU_Support;	// This indicates Tx A-MSDU capability
+	u16				nCurrent_AMSDU_MaxSize;	// This indicates Tx A-MSDU capability
+
+
+	// AMPDU  related <2006.08.10 Emily>
+	u8				bAMPDUEnable;				// This indicate Tx A-MPDU capability
+	u8				bCurrentAMPDUEnable;		// This indicate Tx A-MPDU capability
+	u8				AMPDU_Factor;				// This indicate Tx A-MPDU capability
+	u8				CurrentAMPDUFactor;		// This indicate Tx A-MPDU capability
+	u8				MPDU_Density;				// This indicate Tx A-MPDU capability
+	u8				CurrentMPDUDensity;			// This indicate Tx A-MPDU capability
+
+	// Forced A-MPDU enable
+	HT_AGGRE_MODE_E	ForcedAMPDUMode;
+	u8				ForcedAMPDUFactor;
+	u8				ForcedMPDUDensity;
+
+	// Forced A-MSDU enable
+	HT_AGGRE_MODE_E	ForcedAMSDUMode;
+	u16				ForcedAMSDUMaxSize;
+
+	u8				bForcedShortGI;
+
+	u8				CurrentOpMode;
+
+	// MIMO PS related
+	u8				SelfMimoPs;
+	u8				PeerMimoPs;
+
+	// 40MHz Channel Offset settings.
+	HT_EXTCHNL_OFFSET	CurSTAExtChnlOffset;
+	u8				bCurTxBW40MHz;	// If we use 40 MHz to Tx
+	u8				PeerBandwidth;
+
+	// For Bandwidth Switching
+	u8				bSwBwInProgress;
+	CHNLOP				ChnlOp; // software switching channel in progress. By Bruce, 2008-02-15.
+	u8				SwBwStep;
+	//RT_TIMER			SwBwTimer;
+	struct timer_list		SwBwTimer;
+
+	// For Realtek proprietary A-MPDU factor for aggregation
+	u8				bRegRT2RTAggregation;
+	u8				bCurrentRT2RTAggregation;
+	u8				bCurrentRT2RTLongSlotTime;
+	u8				szRT2RTAggBuffer[10];
+
+	// Rx Reorder control
+	u8				bRegRxReorderEnable;
+	u8				bCurRxReorderEnable;
+	u8				RxReorderWinSize;
+	u8				RxReorderPendingTime;
+	u16				RxReorderDropCounter;
+
+#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
+	u8				UsbTxAggrNum;
+#endif
+#ifdef USB_RX_AGGREGATION_SUPPORT
+	u8				UsbRxFwAggrEn;
+	u8				UsbRxFwAggrPageNum;
+	u8				UsbRxFwAggrPacketNum;
+	u8				UsbRxFwAggrTimeout;
+#endif
+
+	// Add for Broadcom(Linksys) IOT. Joseph
+	u8				bIsPeerBcm;
+
+	// For IOT issue.
+	u32					IOTAction;
+}RT_HIGH_THROUGHPUT, *PRT_HIGH_THROUGHPUT;
+
+
+//------------------------------------------------------------
+// The Data structure is used to keep HT related variable for "each Sta"
+// when card is configured as "AP mode"
+//------------------------------------------------------------
+
+typedef struct _RT_HTINFO_STA_ENTRY{
+	u8			bEnableHT;
+
+	u8			bSupportCck;
+
+	u16			AMSDU_MaxSize;
+
+	u8			AMPDU_Factor;
+	u8			MPDU_Density;
+
+	u8			HTHighestOperaRate;
+
+	u8			bBw40MHz;
+
+	u8			MimoPs;
+
+	u8			McsRateSet[16];
+
+
+}RT_HTINFO_STA_ENTRY, *PRT_HTINFO_STA_ENTRY;
+
+
+
+
+
+//------------------------------------------------------------
+// The Data structure is used to keep HT related variable for "each AP"
+// when card is configured as "STA mode"
+//------------------------------------------------------------
+
+typedef struct _BSS_HT{
+
+	u8				bdSupportHT;
+
+	// HT related elements
+	u8					bdHTCapBuf[32];
+	u16					bdHTCapLen;
+	u8					bdHTInfoBuf[32];
+	u16					bdHTInfoLen;
+
+	HT_SPEC_VER				bdHTSpecVer;
+	//HT_CAPABILITY_ELE			bdHTCapEle;
+	//HT_INFORMATION_ELE		bdHTInfoEle;
+
+	u8					bdRT2RTAggregation;
+	u8					bdRT2RTLongSlotTime;
+	bool					bdHT1R;
+}BSS_HT, *PBSS_HT;
+
+typedef struct _MIMO_RSSI{
+	u32	EnableAntenna;
+	u32	AntennaA;
+	u32 	AntennaB;
+	u32 	AntennaC;
+	u32 	AntennaD;
+	u32	Average;
+}MIMO_RSSI, *PMIMO_RSSI;
+
+typedef struct _MIMO_EVM{
+	u32	EVM1;
+	u32    EVM2;
+}MIMO_EVM, *PMIMO_EVM;
+
+typedef struct _FALSE_ALARM_STATISTICS{
+	u32	Cnt_Parity_Fail;
+	u32    Cnt_Rate_Illegal;
+	u32	Cnt_Crc8_fail;
+	u32	Cnt_all;
+}FALSE_ALARM_STATISTICS, *PFALSE_ALARM_STATISTICS;
+
+
+
+#endif //__INC_HTTYPE_H
+
diff --git a/drivers/staging/rtl8192su/r819xU_cmdpkt.c b/drivers/staging/rtl8192su/r819xU_cmdpkt.c
new file mode 100644
index 00000000000..c1149c6f77b
--- /dev/null
+++ b/drivers/staging/rtl8192su/r819xU_cmdpkt.c
@@ -0,0 +1,826 @@
+/******************************************************************************
+
+     (c) Copyright 2008, RealTEK Technologies Inc. All Rights Reserved.
+
+ Module:	r819xusb_cmdpkt.c	(RTL8190 TX/RX command packet handler Source C File)
+
+ Note:      The module is responsible for handling TX and RX command packet.
+ 			1. TX : Send set and query configuration command packet.
+ 			2. RX : Receive tx feedback, beacon state, query configuration
+ 			        command packet.
+
+ Function:
+
+ Export:
+
+ Abbrev:
+
+ History:
+	Data		Who		Remark
+
+	05/06/2008  amy    	Create initial version porting from windows driver.
+
+******************************************************************************/
+#include "r8192U.h"
+#include "r819xU_cmdpkt.h"
+/*---------------------------Define Local Constant---------------------------*/
+/* Debug constant*/
+#define		CMPK_DEBOUNCE_CNT			1
+/* 2007/10/24 MH Add for printing a range of data. */
+#define		CMPK_PRINT(Address)\
+{\
+	unsigned char	i;\
+	u32	temp[10];\
+	\
+	memcpy(temp, Address, 40);\
+	for (i = 0; i <40; i+=4)\
+		printk("\r\n %08x", temp[i]);\
+}\
+/*---------------------------Define functions---------------------------------*/
+
+bool
+SendTxCommandPacket(
+	struct net_device *dev,
+	void* 			pData,
+	u32				DataLen
+	)
+{
+	bool	rtStatus = true;
+	struct r8192_priv   *priv = ieee80211_priv(dev);
+	struct sk_buff	    *skb;
+	cb_desc		    *tcb_desc;
+	unsigned char	    *ptr_buf;
+	//bool	bLastInitPacket = false;
+
+	//PlatformAcquireSpinLock(Adapter, RT_TX_SPINLOCK);
+
+	//Get TCB and local buffer from common pool. (It is shared by CmdQ, MgntQ, and USB coalesce DataQ)
+	skb  = dev_alloc_skb(USB_HWDESC_HEADER_LEN + DataLen + 4);
+	memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev));
+	tcb_desc = (cb_desc*)(skb->cb + MAX_DEV_ADDR_SIZE);
+	tcb_desc->queue_index = TXCMD_QUEUE;
+	tcb_desc->bCmdOrInit = DESC_PACKET_TYPE_NORMAL;
+	tcb_desc->bLastIniPkt = 0;
+	skb_reserve(skb, USB_HWDESC_HEADER_LEN);
+	ptr_buf = skb_put(skb, DataLen);
+	memset(ptr_buf,0,DataLen);
+	memcpy(ptr_buf,pData,DataLen);
+	tcb_desc->txbuf_size= (u16)DataLen;
+
+	if(!priv->ieee80211->check_nic_enough_desc(dev,tcb_desc->queue_index)||
+			(!skb_queue_empty(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index]))||\
+			(priv->ieee80211->queue_stop) ) {
+			RT_TRACE(COMP_FIRMWARE,"===================NULL packet==================================> tx full!\n");
+			skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb);
+		} else {
+			priv->ieee80211->softmac_hard_start_xmit(skb,dev);
+		}
+
+	//PlatformReleaseSpinLock(Adapter, RT_TX_SPINLOCK);
+	return rtStatus;
+}
+
+/*-----------------------------------------------------------------------------
+ * Function:	cmpk_message_handle_tx()
+ *
+ * Overview:	Driver internal module can call the API to send message to
+ *				firmware side. For example, you can send a debug command packet.
+ *				Or you can send a request for FW to modify RLX4181 LBUS HW bank.
+ *				Otherwise, you can change MAC/PHT/RF register by firmware at
+ *				run time. We do not support message more than one segment now.
+ *
+ * Input:		NONE
+ *
+ * Output:		NONE
+ *
+ * Return:		NONE
+ *
+ * Revised History:
+ *	When		Who		Remark
+ *	05/06/2008	amy		porting from windows code.
+ *
+ *---------------------------------------------------------------------------*/
+ extern	bool	cmpk_message_handle_tx(
+	struct net_device *dev,
+	u8*	codevirtualaddress,
+	u32	packettype,
+	u32	buffer_len)
+{
+
+	bool 	    rt_status = true;
+#ifdef RTL8192SU
+	return rt_status;
+#else
+#ifdef RTL8192U
+	return rt_status;
+#else
+	struct r8192_priv   *priv = ieee80211_priv(dev);
+	u16		    frag_threshold;
+	u16		    frag_length, frag_offset = 0;
+	//u16		    total_size;
+	//int		    i;
+
+	rt_firmware	    *pfirmware = priv->pFirmware;
+	struct sk_buff	    *skb;
+	unsigned char	    *seg_ptr;
+	cb_desc		    *tcb_desc;
+	u8                  bLastIniPkt;
+
+	firmware_init_param(dev);
+	//Fragmentation might be required
+	frag_threshold = pfirmware->cmdpacket_frag_thresold;
+	do {
+		if((buffer_len - frag_offset) > frag_threshold) {
+			frag_length = frag_threshold ;
+			bLastIniPkt = 0;
+
+		} else {
+			frag_length = buffer_len - frag_offset;
+			bLastIniPkt = 1;
+
+		}
+
+		/* Allocate skb buffer to contain firmware info and tx descriptor info
+		 * add 4 to avoid packet appending overflow.
+		 * */
+		#ifdef RTL8192U
+		skb  = dev_alloc_skb(USB_HWDESC_HEADER_LEN + frag_length + 4);
+		#else
+		skb  = dev_alloc_skb(frag_length + 4);
+		#endif
+		memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev));
+		tcb_desc = (cb_desc*)(skb->cb + MAX_DEV_ADDR_SIZE);
+		tcb_desc->queue_index = TXCMD_QUEUE;
+		tcb_desc->bCmdOrInit = packettype;
+		tcb_desc->bLastIniPkt = bLastIniPkt;
+
+		#ifdef RTL8192U
+		skb_reserve(skb, USB_HWDESC_HEADER_LEN);
+		#endif
+
+		seg_ptr = skb_put(skb, buffer_len);
+		/*
+		 * Transform from little endian to big endian
+                 * and pending  zero
+		 */
+		memcpy(seg_ptr,codevirtualaddress,buffer_len);
+		tcb_desc->txbuf_size= (u16)buffer_len;
+
+
+		if(!priv->ieee80211->check_nic_enough_desc(dev,tcb_desc->queue_index)||
+			(!skb_queue_empty(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index]))||\
+			(priv->ieee80211->queue_stop) ) {
+			RT_TRACE(COMP_FIRMWARE,"=====================================================> tx full!\n");
+			skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb);
+		} else {
+			priv->ieee80211->softmac_hard_start_xmit(skb,dev);
+		}
+
+		codevirtualaddress += frag_length;
+		frag_offset += frag_length;
+
+	}while(frag_offset < buffer_len);
+
+	return rt_status;
+
+
+#endif
+#endif
+}	/* CMPK_Message_Handle_Tx */
+
+/*-----------------------------------------------------------------------------
+ * Function:    cmpk_counttxstatistic()
+ *
+ * Overview:
+ *
+ * Input:       PADAPTER 	pAdapter		-	.
+ *				CMPK_TXFB_T *psTx_FB	-	.
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ *  When		Who		Remark
+ *  05/12/2008	amy 	Create Version 0 porting from windows code.
+ *
+ *---------------------------------------------------------------------------*/
+static	void
+cmpk_count_txstatistic(
+	struct net_device *dev,
+	cmpk_txfb_t	*pstx_fb)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+#ifdef ENABLE_PS
+	RT_RF_POWER_STATE	rtState;
+
+	pAdapter->HalFunc.GetHwRegHandler(pAdapter, HW_VAR_RF_STATE, (pu1Byte)(&rtState));
+
+	// When RF is off, we should not count the packet for hw/sw synchronize
+	// reason, ie. there may be a duration while sw switch is changed and hw
+	// switch is being changed. 2006.12.04, by shien chang.
+	if (rtState == eRfOff)
+	{
+		return;
+	}
+#endif
+
+#ifdef TODO
+	if(pAdapter->bInHctTest)
+		return;
+#endif
+	/* We can not know the packet length and transmit type: broadcast or uni
+	   or multicast. So the relative statistics must be collected in tx
+	   feedback info. */
+	if (pstx_fb->tok)
+	{
+		priv->stats.txfeedbackok++;
+		priv->stats.txoktotal++;
+		priv->stats.txokbytestotal += pstx_fb->pkt_length;
+		priv->stats.txokinperiod++;
+
+		/* We can not make sure broadcast/multicast or unicast mode. */
+		if (pstx_fb->pkt_type == PACKET_MULTICAST)
+		{
+			priv->stats.txmulticast++;
+			priv->stats.txbytesmulticast += pstx_fb->pkt_length;
+		}
+		else if (pstx_fb->pkt_type == PACKET_BROADCAST)
+		{
+			priv->stats.txbroadcast++;
+			priv->stats.txbytesbroadcast += pstx_fb->pkt_length;
+		}
+		else
+		{
+			priv->stats.txunicast++;
+			priv->stats.txbytesunicast += pstx_fb->pkt_length;
+		}
+	}
+	else
+	{
+		priv->stats.txfeedbackfail++;
+		priv->stats.txerrtotal++;
+		priv->stats.txerrbytestotal += pstx_fb->pkt_length;
+
+		/* We can not make sure broadcast/multicast or unicast mode. */
+		if (pstx_fb->pkt_type == PACKET_MULTICAST)
+		{
+			priv->stats.txerrmulticast++;
+		}
+		else if (pstx_fb->pkt_type == PACKET_BROADCAST)
+		{
+			priv->stats.txerrbroadcast++;
+		}
+		else
+		{
+			priv->stats.txerrunicast++;
+		}
+	}
+
+	priv->stats.txretrycount += pstx_fb->retry_cnt;
+	priv->stats.txfeedbackretry += pstx_fb->retry_cnt;
+
+}	/* cmpk_CountTxStatistic */
+
+
+
+/*-----------------------------------------------------------------------------
+ * Function:    cmpk_handle_tx_feedback()
+ *
+ * Overview:	The function is responsible for extract the message inside TX
+ *				feedbck message from firmware. It will contain dedicated info in
+ *				ws-06-0063-rtl8190-command-packet-specification. Please
+ *				refer to chapter "TX Feedback Element". We have to read 20 bytes
+ *				in the command packet.
+ *
+ * Input:       struct net_device *    dev
+ *				u8 	*	pmsg		-	Msg Ptr of the command packet.
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ *  When		Who		Remark
+ *  05/08/2008	amy		Create Version 0 porting from windows code.
+ *
+ *---------------------------------------------------------------------------*/
+static	void
+cmpk_handle_tx_feedback(
+	struct net_device *dev,
+	u8	*	pmsg)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	cmpk_txfb_t		rx_tx_fb;	/* */
+
+	priv->stats.txfeedback++;
+
+	/* 0. Display received message. */
+	//cmpk_Display_Message(CMPK_RX_TX_FB_SIZE, pMsg);
+
+	/* 1. Extract TX feedback info from RFD to temp structure buffer. */
+	/* It seems that FW use big endian(MIPS) and DRV use little endian in
+	   windows OS. So we have to read the content byte by byte or transfer
+	   endian type before copy the message copy. */
+#if 0		// The TX FEEDBACK packet element address
+	//rx_tx_fb.Element_ID 	= pMsg[0];
+	//rx_tx_fb.Length 		= pMsg[1];
+	rx_tx_fb.TOK 			= pMsg[2]>>7;
+	rx_tx_fb.Fail_Reason 	= (pMsg[2] & 0x70) >> 4;
+	rx_tx_fb.TID 			= (pMsg[2] & 0x0F);
+	rx_tx_fb.Qos_Pkt 		= pMsg[3] >> 7;
+	rx_tx_fb.Bandwidth 		= (pMsg[3] & 0x40) >> 6;
+	rx_tx_fb.Retry_Cnt 		= pMsg[5];
+	rx_tx_fb.Pkt_ID 		= (pMsg[6] << 8) | pMsg[7];
+	rx_tx_fb.Seq_Num 		= (pMsg[8] << 8) | pMsg[9];
+	rx_tx_fb.S_Rate 		= pMsg[10];
+	rx_tx_fb.F_Rate 		= pMsg[11];
+	rx_tx_fb.S_RTS_Rate 	= pMsg[12];
+	rx_tx_fb.F_RTS_Rate 	= pMsg[13];
+	rx_tx_fb.pkt_length	= (pMsg[14] << 8) | pMsg[15];
+#endif
+	/* 2007/07/05 MH Use pointer to transfer structure memory. */
+	//memcpy((UINT8 *)&rx_tx_fb, pMsg, sizeof(CMPK_TXFB_T));
+	memcpy((u8*)&rx_tx_fb, pmsg, sizeof(cmpk_txfb_t));
+	/* 2. Use tx feedback info to count TX statistics. */
+	cmpk_count_txstatistic(dev, &rx_tx_fb);
+#if 0
+	/* 2007/07/11 MH Assign current operate rate.  */
+	if (pAdapter->RegWirelessMode == WIRELESS_MODE_A ||
+		pAdapter->RegWirelessMode == WIRELESS_MODE_B ||
+		pAdapter->RegWirelessMode == WIRELESS_MODE_G)
+	{
+		pMgntInfo->CurrentOperaRate = (rx_tx_fb.F_Rate & 0x7F);
+	}
+	else if (pAdapter->RegWirelessMode == WIRELESS_MODE_N_24G ||
+		 	 pAdapter->RegWirelessMode == WIRELESS_MODE_N_5G)
+	{
+		pMgntInfo->HTCurrentOperaRate = (rx_tx_fb.F_Rate & 0x8F);
+	}
+#endif
+	/* 2007/01/17 MH Comment previous method for TX statistic function. */
+	/* Collect info TX feedback packet to fill TCB. */
+	/* We can not know the packet length and transmit type: broadcast or uni
+	   or multicast. */
+	//CountTxStatistics( pAdapter, &tcb );
+
+}	/* cmpk_Handle_Tx_Feedback */
+
+void
+cmdpkt_beacontimerinterrupt_819xusb(
+	struct net_device *dev
+)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u16 tx_rate;
+	{
+		//
+		// 070117, rcnjko: 87B have to S/W beacon for DTM encryption_cmn.
+		//
+		if(priv->ieee80211->current_network.mode == IEEE_A  ||
+			priv->ieee80211->current_network.mode == IEEE_N_5G ||
+			(priv->ieee80211->current_network.mode == IEEE_N_24G  && (!priv->ieee80211->pHTInfo->bCurSuppCCK)))
+		{
+			tx_rate = 60;
+			DMESG("send beacon frame  tx rate is 6Mbpm\n");
+		}
+		else
+		{
+			tx_rate =10;
+			DMESG("send beacon frame  tx rate is 1Mbpm\n");
+		}
+
+		rtl819xusb_beacon_tx(dev,tx_rate); // HW Beacon
+
+	}
+
+}
+
+
+
+
+/*-----------------------------------------------------------------------------
+ * Function:    cmpk_handle_interrupt_status()
+ *
+ * Overview:    The function is responsible for extract the message from
+ *				firmware. It will contain dedicated info in
+ *				ws-07-0063-v06-rtl819x-command-packet-specification-070315.doc.
+ * 				Please refer to chapter "Interrupt Status Element".
+ *
+ * Input:       struct net_device *dev,
+ *			u8*	pmsg		-	Message Pointer of the command packet.
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ *  When			Who			Remark
+ *  05/12/2008	amy		Add this for rtl8192 porting from windows code.
+ *
+ *---------------------------------------------------------------------------*/
+static	void
+cmpk_handle_interrupt_status(
+	struct net_device *dev,
+	u8*	pmsg)
+{
+	cmpk_intr_sta_t		rx_intr_status;	/* */
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	DMESG("---> cmpk_Handle_Interrupt_Status()\n");
+
+	/* 0. Display received message. */
+	//cmpk_Display_Message(CMPK_RX_BEACON_STATE_SIZE, pMsg);
+
+	/* 1. Extract TX feedback info from RFD to temp structure buffer. */
+	/* It seems that FW use big endian(MIPS) and DRV use little endian in
+	   windows OS. So we have to read the content byte by byte or transfer
+	   endian type before copy the message copy. */
+	//rx_bcn_state.Element_ID 	= pMsg[0];
+	//rx_bcn_state.Length 		= pMsg[1];
+	rx_intr_status.length = pmsg[1];
+	if (rx_intr_status.length != (sizeof(cmpk_intr_sta_t) - 2))
+	{
+		DMESG("cmpk_Handle_Interrupt_Status: wrong length!\n");
+		return;
+	}
+
+
+	// Statistics of beacon for ad-hoc mode.
+	if(	priv->ieee80211->iw_mode == IW_MODE_ADHOC)
+	{
+		//2 maybe need endian transform?
+		rx_intr_status.interrupt_status = *((u32 *)(pmsg + 4));
+		//rx_intr_status.InterruptStatus = N2H4BYTE(*((UINT32 *)(pMsg + 4)));
+
+		DMESG("interrupt status = 0x%x\n", rx_intr_status.interrupt_status);
+
+		if (rx_intr_status.interrupt_status & ISR_TxBcnOk)
+		{
+			priv->ieee80211->bibsscoordinator = true;
+			priv->stats.txbeaconokint++;
+		}
+		else if (rx_intr_status.interrupt_status & ISR_TxBcnErr)
+		{
+			priv->ieee80211->bibsscoordinator = false;
+			priv->stats.txbeaconerr++;
+		}
+
+		if (rx_intr_status.interrupt_status & ISR_BcnTimerIntr)
+		{
+			cmdpkt_beacontimerinterrupt_819xusb(dev);
+		}
+
+	}
+
+	 // Other informations in interrupt status we need?
+
+
+	DMESG("<---- cmpk_handle_interrupt_status()\n");
+
+}	/* cmpk_handle_interrupt_status */
+
+
+/*-----------------------------------------------------------------------------
+ * Function:    cmpk_handle_query_config_rx()
+ *
+ * Overview:    The function is responsible for extract the message from
+ *				firmware. It will contain dedicated info in
+ *				ws-06-0063-rtl8190-command-packet-specification. Please
+ *				refer to chapter "Beacon State Element".
+ *
+ * Input:       u8 *  pmsg	-	Message Pointer of the command packet.
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ *  When		Who		Remark
+ *  05/12/2008	amy		Create Version 0 porting from windows code.
+ *
+ *---------------------------------------------------------------------------*/
+static	void
+cmpk_handle_query_config_rx(
+	struct net_device *dev,
+	u8*	   pmsg)
+{
+	cmpk_query_cfg_t	rx_query_cfg;	/* */
+
+	/* 0. Display received message. */
+	//cmpk_Display_Message(CMPK_RX_BEACON_STATE_SIZE, pMsg);
+
+	/* 1. Extract TX feedback info from RFD to temp structure buffer. */
+	/* It seems that FW use big endian(MIPS) and DRV use little endian in
+	   windows OS. So we have to read the content byte by byte or transfer
+	   endian type before copy the message copy. */
+	//rx_query_cfg.Element_ID 	= pMsg[0];
+	//rx_query_cfg.Length 		= pMsg[1];
+	rx_query_cfg.cfg_action 	= (pmsg[4] & 0x80000000)>>31;
+	rx_query_cfg.cfg_type 		= (pmsg[4] & 0x60) >> 5;
+	rx_query_cfg.cfg_size 		= (pmsg[4] & 0x18) >> 3;
+	rx_query_cfg.cfg_page 		= (pmsg[6] & 0x0F) >> 0;
+	rx_query_cfg.cfg_offset 		= pmsg[7];
+	rx_query_cfg.value 			= (pmsg[8] << 24) | (pmsg[9] << 16) |
+								  (pmsg[10] << 8) | (pmsg[11] << 0);
+	rx_query_cfg.mask 			= (pmsg[12] << 24) | (pmsg[13] << 16) |
+								  (pmsg[14] << 8) | (pmsg[15] << 0);
+
+}	/* cmpk_Handle_Query_Config_Rx */
+
+
+/*-----------------------------------------------------------------------------
+ * Function:	cmpk_count_tx_status()
+ *
+ * Overview:	Count aggregated tx status from firmwar of one type rx command
+ *				packet element id = RX_TX_STATUS.
+ *
+ * Input:		NONE
+ *
+ * Output:		NONE
+ *
+ * Return:		NONE
+ *
+ * Revised History:
+ *	When		Who		Remark
+ *	05/12/2008	amy		Create Version 0 porting from windows code.
+ *
+ *---------------------------------------------------------------------------*/
+static	void	cmpk_count_tx_status(	struct net_device *dev,
+									cmpk_tx_status_t 	*pstx_status)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+#ifdef ENABLE_PS
+
+	RT_RF_POWER_STATE	rtstate;
+
+	pAdapter->HalFunc.GetHwRegHandler(pAdapter, HW_VAR_RF_STATE, (pu1Byte)(&rtState));
+
+	// When RF is off, we should not count the packet for hw/sw synchronize
+	// reason, ie. there may be a duration while sw switch is changed and hw
+	// switch is being changed. 2006.12.04, by shien chang.
+	if (rtState == eRfOff)
+	{
+		return;
+	}
+#endif
+
+	priv->stats.txfeedbackok	+= pstx_status->txok;
+	priv->stats.txoktotal		+= pstx_status->txok;
+
+	priv->stats.txfeedbackfail	+= pstx_status->txfail;
+	priv->stats.txerrtotal		+= pstx_status->txfail;
+
+	priv->stats.txretrycount		+= pstx_status->txretry;
+	priv->stats.txfeedbackretry	+= pstx_status->txretry;
+
+	//pAdapter->TxStats.NumTxOkBytesTotal += psTx_FB->pkt_length;
+	//pAdapter->TxStats.NumTxErrBytesTotal += psTx_FB->pkt_length;
+	//pAdapter->MgntInfo.LinkDetectInfo.NumTxOkInPeriod++;
+
+	priv->stats.txmulticast	+= pstx_status->txmcok;
+	priv->stats.txbroadcast	+= pstx_status->txbcok;
+	priv->stats.txunicast		+= pstx_status->txucok;
+
+	priv->stats.txerrmulticast	+= pstx_status->txmcfail;
+	priv->stats.txerrbroadcast	+= pstx_status->txbcfail;
+	priv->stats.txerrunicast	+= pstx_status->txucfail;
+
+	priv->stats.txbytesmulticast	+= pstx_status->txmclength;
+	priv->stats.txbytesbroadcast	+= pstx_status->txbclength;
+	priv->stats.txbytesunicast		+= pstx_status->txuclength;
+
+	priv->stats.last_packet_rate		= pstx_status->rate;
+}	/* cmpk_CountTxStatus */
+
+
+
+/*-----------------------------------------------------------------------------
+ * Function:	cmpk_handle_tx_status()
+ *
+ * Overview:	Firmware add a new tx feedback status to reduce rx command
+ *				packet buffer operation load.
+ *
+ * Input:		NONE
+ *
+ * Output:		NONE
+ *
+ * Return:		NONE
+ *
+ * Revised History:
+ *	When		Who		Remark
+ *	05/12/2008	amy		Create Version 0 porting from windows code.
+ *
+ *---------------------------------------------------------------------------*/
+static	void
+cmpk_handle_tx_status(
+	struct net_device *dev,
+	u8*	   pmsg)
+{
+	cmpk_tx_status_t	rx_tx_sts;	/* */
+
+	memcpy((void*)&rx_tx_sts, (void*)pmsg, sizeof(cmpk_tx_status_t));
+	/* 2. Use tx feedback info to count TX statistics. */
+	cmpk_count_tx_status(dev, &rx_tx_sts);
+
+}	/* cmpk_Handle_Tx_Status */
+
+
+/*-----------------------------------------------------------------------------
+ * Function:	cmpk_handle_tx_rate_history()
+ *
+ * Overview:	Firmware add a new tx rate history
+ *
+ * Input:		NONE
+ *
+ * Output:		NONE
+ *
+ * Return:		NONE
+ *
+ * Revised History:
+ *	When		Who		Remark
+ *	05/12/2008	amy		Create Version 0 porting from windows code.
+ *
+ *---------------------------------------------------------------------------*/
+static	void
+cmpk_handle_tx_rate_history(
+	struct net_device *dev,
+	u8*	   pmsg)
+{
+	cmpk_tx_rahis_t	*ptxrate;
+//	RT_RF_POWER_STATE	rtState;
+	u8				i, j;
+	u16				length = sizeof(cmpk_tx_rahis_t);
+	u32				*ptemp;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+
+#ifdef ENABLE_PS
+	pAdapter->HalFunc.GetHwRegHandler(pAdapter, HW_VAR_RF_STATE, (pu1Byte)(&rtState));
+
+	// When RF is off, we should not count the packet for hw/sw synchronize
+	// reason, ie. there may be a duration while sw switch is changed and hw
+	// switch is being changed. 2006.12.04, by shien chang.
+	if (rtState == eRfOff)
+	{
+		return;
+	}
+#endif
+
+	ptemp = (u32 *)pmsg;
+
+	//
+	// Do endian transfer to word alignment(16 bits) for windows system.
+	// You must do different endian transfer for linux and MAC OS
+	//
+	for (i = 0; i < (length/4); i++)
+	{
+		u16	 temp1, temp2;
+
+		temp1 = ptemp[i]&0x0000FFFF;
+		temp2 = ptemp[i]>>16;
+		ptemp[i] = (temp1<<16)|temp2;
+	}
+
+	ptxrate = (cmpk_tx_rahis_t *)pmsg;
+
+	if (ptxrate == NULL )
+	{
+		return;
+	}
+
+	for (i = 0; i < 16; i++)
+	{
+		// Collect CCK rate packet num
+		if (i < 4)
+			priv->stats.txrate.cck[i] += ptxrate->cck[i];
+
+		// Collect OFDM rate packet num
+		if (i< 8)
+			priv->stats.txrate.ofdm[i] += ptxrate->ofdm[i];
+
+		for (j = 0; j < 4; j++)
+			priv->stats.txrate.ht_mcs[j][i] += ptxrate->ht_mcs[j][i];
+	}
+
+}	/* cmpk_Handle_Tx_Rate_History */
+
+
+/*-----------------------------------------------------------------------------
+ * Function:    cmpk_message_handle_rx()
+ *
+ * Overview:    In the function, we will capture different RX command packet
+ *				info. Every RX command packet element has different message
+ *				length and meaning in content. We only support three type of RX
+ *				command packet now. Please refer to document
+ *				ws-06-0063-rtl8190-command-packet-specification.
+ *
+ * Input:       NONE
+ *
+ * Output:      NONE
+ *
+ * Return:      NONE
+ *
+ * Revised History:
+ *  When		Who		Remark
+ *  05/06/2008	amy		Create Version 0 porting from windows code.
+ *
+ *---------------------------------------------------------------------------*/
+extern	u32
+cmpk_message_handle_rx(
+	struct net_device *dev,
+	struct ieee80211_rx_stats *pstats)
+{
+//	u32			debug_level = DBG_LOUD;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	int			total_length;
+	u8			cmd_length, exe_cnt = 0;
+	u8			element_id;
+	u8			*pcmd_buff;
+
+	/* 0. Check inpt arguments. If is is a command queue message or pointer is
+	      null. */
+	if (/*(prfd->queue_id != CMPK_RX_QUEUE_ID) || */(pstats== NULL))
+	{
+		/* Print error message. */
+		/*RT_TRACE(COMP_SEND, DebugLevel,
+				("\n\r[CMPK]-->Err queue id or pointer"));*/
+		return 0;	/* This is not a command packet. */
+	}
+
+	/* 1. Read received command packet message length from RFD. */
+	total_length = pstats->Length;
+
+	/* 2. Read virtual address from RFD. */
+	pcmd_buff = pstats->virtual_address;
+
+	/* 3. Read command pakcet element id and length. */
+	element_id = pcmd_buff[0];
+	/*RT_TRACE(COMP_SEND, DebugLevel,
+			("\n\r[CMPK]-->element ID=%d Len=%d", element_id, total_length));*/
+
+	/* 4. Check every received command packet conent according to different
+	      element type. Because FW may aggregate RX command packet to minimize
+	      transmit time between DRV and FW.*/
+	// Add a counter to prevent to locked in the loop too long
+	while (total_length > 0 || exe_cnt++ >100)
+	{
+		/* 2007/01/17 MH We support aggregation of different cmd in the same packet. */
+		element_id = pcmd_buff[0];
+
+		switch(element_id)
+		{
+			case RX_TX_FEEDBACK:
+				cmpk_handle_tx_feedback (dev, pcmd_buff);
+				cmd_length = CMPK_RX_TX_FB_SIZE;
+				break;
+
+			case RX_INTERRUPT_STATUS:
+				cmpk_handle_interrupt_status(dev, pcmd_buff);
+				cmd_length = sizeof(cmpk_intr_sta_t);
+				break;
+
+			case BOTH_QUERY_CONFIG:
+				cmpk_handle_query_config_rx(dev, pcmd_buff);
+				cmd_length = CMPK_BOTH_QUERY_CONFIG_SIZE;
+				break;
+
+			case RX_TX_STATUS:
+				cmpk_handle_tx_status(dev, pcmd_buff);
+				cmd_length = CMPK_RX_TX_STS_SIZE;
+				break;
+
+			case RX_TX_PER_PKT_FEEDBACK:
+				// You must at lease add a switch case element here,
+				// Otherwise, we will jump to default case.
+				//DbgPrint("CCX Test\r\n");
+				cmd_length = CMPK_RX_TX_FB_SIZE;
+				break;
+
+			case RX_TX_RATE_HISTORY:
+				//DbgPrint(" rx tx rate history\r\n");
+				cmpk_handle_tx_rate_history(dev, pcmd_buff);
+				cmd_length = CMPK_TX_RAHIS_SIZE;
+				break;
+
+			default:
+
+			        RT_TRACE(COMP_ERR, "---->cmpk_message_handle_rx():unknow CMD Element\n");
+				return 1;	/* This is a command packet. */
+		}
+		// 2007/01/22 MH Display received rx command packet info.
+		//cmpk_Display_Message(cmd_length, pcmd_buff);
+
+		// 2007/01/22 MH Add to display tx statistic.
+		//cmpk_DisplayTxStatistic(pAdapter);
+
+		/* 2007/03/09 MH Collect sidderent cmd element pkt num. */
+		priv->stats.rxcmdpkt[element_id]++;
+
+		total_length -= cmd_length;
+		pcmd_buff    += cmd_length;
+	}	/* while (total_length > 0) */
+	return	1;	/* This is a command packet. */
+
+}	/* CMPK_Message_Handle_Rx */
diff --git a/drivers/staging/rtl8192su/r819xU_cmdpkt.h b/drivers/staging/rtl8192su/r819xU_cmdpkt.h
new file mode 100644
index 00000000000..f67af6cfd20
--- /dev/null
+++ b/drivers/staging/rtl8192su/r819xU_cmdpkt.h
@@ -0,0 +1,219 @@
+#ifndef R819XUSB_CMDPKT_H
+#define R819XUSB_CMDPKT_H
+/* Different command packet have dedicated message length and definition. */
+#define		CMPK_RX_TX_FB_SIZE					sizeof(cmpk_txfb_t)		//20
+#define		CMPK_TX_SET_CONFIG_SIZE				sizeof(cmpk_set_cfg_t)	//16
+#define		CMPK_BOTH_QUERY_CONFIG_SIZE			sizeof(cmpk_set_cfg_t)	//16
+#define		CMPK_RX_TX_STS_SIZE					sizeof(cmpk_tx_status_t)//
+#define		CMPK_RX_DBG_MSG_SIZE			sizeof(cmpk_rx_dbginfo_t)//
+#define		CMPK_TX_RAHIS_SIZE			sizeof(cmpk_tx_rahis_t)
+
+/* 2008/05/08 amy For USB constant. */
+#define ISR_TxBcnOk					BIT27			// Transmit Beacon OK
+#define ISR_TxBcnErr				BIT26			// Transmit Beacon Error
+#define ISR_BcnTimerIntr			BIT13			// Beacon Timer Interrupt
+
+#if 0
+/* Define packet type. */
+typedef enum tag_packet_type
+{
+    PACKET_BROADCAST,
+    PACKET_MULTICAST,
+    PACKET_UNICAST,
+    PACKET_TYPE_MAX
+}cmpk_pkt_type_e;
+#endif
+
+/* Define element ID of command packet. */
+
+/*------------------------------Define structure----------------------------*/
+/* Define different command packet structure. */
+/* 1. RX side: TX feedback packet. */
+typedef struct tag_cmd_pkt_tx_feedback
+{
+	// DWORD 0
+	u8	element_id;			/* Command packet type. */
+	u8	length;				/* Command packet length. */
+	/* 2007/07/05 MH Change tx feedback info field. */
+	/*------TX Feedback Info Field */
+	u8	TID:4;				/* */
+	u8	fail_reason:3;		/* */
+	u8	tok:1;				/* Transmit ok. */
+	u8	reserve1:4;			/* */
+	u8	pkt_type:2;		/* */
+	u8	bandwidth:1;		/* */
+	u8	qos_pkt:1;			/* */
+
+	// DWORD 1
+	u8	reserve2;			/* */
+	/*------TX Feedback Info Field */
+	u8	retry_cnt;			/* */
+	u16	pkt_id;				/* */
+
+	// DWORD 3
+	u16	seq_num;			/* */
+	u8	s_rate;				/* Start rate. */
+	u8	f_rate;				/* Final rate. */
+
+	// DWORD 4
+	u8	s_rts_rate;			/* */
+	u8	f_rts_rate;			/* */
+	u16	pkt_length;			/* */
+
+	// DWORD 5
+	u16	reserve3;			/* */
+	u16	duration;			/* */
+}cmpk_txfb_t;
+
+/* 2. RX side: Interrupt status packet. It includes Beacon State,
+	  Beacon Timer Interrupt and other useful informations in MAC ISR Reg. */
+typedef struct tag_cmd_pkt_interrupt_status
+{
+	u8	element_id;			/* Command packet type. */
+	u8	length;				/* Command packet length. */
+	u16	reserve;
+	u32	interrupt_status;				/* Interrupt Status. */
+}cmpk_intr_sta_t;
+
+
+/* 3. TX side: Set configuration packet. */
+typedef struct tag_cmd_pkt_set_configuration
+{
+	u8	element_id;			/* Command packet type. */
+	u8	length;				/* Command packet length. */
+	u16	reserve1;			/* */
+	u8 	cfg_reserve1:3;
+	u8	cfg_size:2;			/* Configuration info. */
+	u8	cfg_type:2;			/* Configuration info. */
+	u8	cfg_action:1;		/* Configuration info. */
+	u8	cfg_reserve2;		/* Configuration info. */
+	u8	cfg_page:4;			/* Configuration info. */
+	u8	cfg_reserve3:4;		/* Configuration info. */
+	u8	cfg_offset;			/* Configuration info. */
+	u32	value;				/* */
+	u32	mask;				/* */
+}cmpk_set_cfg_t;
+
+/* 4. Both side : TX/RX query configuraton packet. The query structure is the
+      same as set configuration. */
+#define		cmpk_query_cfg_t	cmpk_set_cfg_t
+
+/* 5. Multi packet feedback status. */
+typedef struct tag_tx_stats_feedback // PJ quick rxcmd 09042007
+{
+	// For endian transfer --> Driver will not the same as firmware structure.
+	// DW 0
+	u16	reserve1;
+	u8 	length;				// Command packet length
+	u8 	element_id;			// Command packet type
+
+	// DW 1
+	u16	txfail;				// Tx Fail count
+	u16 	txok;				// Tx ok count
+
+	// DW 2
+	u16	txmcok;  			// tx multicast
+	u16 	txretry;			// Tx Retry count
+
+	// DW 3
+	u16  txucok;				// tx unicast
+	u16	txbcok;  			// tx broadcast
+
+	// DW 4
+	u16	txbcfail;			//
+	u16	txmcfail;			//
+
+	// DW 5
+	u16	reserve2;			//
+	u16	txucfail;			//
+
+	// DW 6-8
+	u32	txmclength;
+	u32	txbclength;
+	u32	txuclength;
+
+	// DW 9
+	u16	reserve3_23;
+	u8	reserve3_1;
+	u8	rate;
+}__attribute__((packed)) cmpk_tx_status_t;
+
+/* 6. Debug feedback message. */
+/* 2007/10/23 MH Define RX debug message  */
+typedef struct tag_rx_debug_message_feedback
+{
+	// For endian transfer --> for driver
+	// DW 0
+	u16	reserve1;
+	u8 	length;				// Command packet length
+	u8 	element_id;			// Command packet type
+
+	// DW 1-??
+	// Variable debug message.
+
+}cmpk_rx_dbginfo_t;
+
+/* 2008/03/20 MH Define transmit rate history. For big endian format. */
+typedef struct tag_tx_rate_history
+{
+	// For endian transfer --> for driver
+	// DW 0
+	u8 	element_id;			// Command packet type
+	u8 	length;				// Command packet length
+	u16	reserved1;
+
+	// DW 1-2	CCK rate counter
+	u16 	cck[4];
+
+	// DW 3-6
+	u16 	ofdm[8];
+
+	// DW 7-14
+	//UINT16	MCS_BW0_SG0[16];
+
+	// DW 15-22
+	//UINT16	MCS_BW1_SG0[16];
+
+	// DW 23-30
+	//UINT16	MCS_BW0_SG1[16];
+
+	// DW 31-38
+	//UINT16	MCS_BW1_SG1[16];
+
+	// DW 7-14	BW=0 SG=0
+	// DW 15-22	BW=1 SG=0
+	// DW 23-30	BW=0 SG=1
+	// DW 31-38	BW=1 SG=1
+	u16	ht_mcs[4][16];
+
+}__attribute__((packed)) cmpk_tx_rahis_t;
+
+typedef enum tag_command_packet_directories
+{
+    RX_TX_FEEDBACK = 0,
+    RX_INTERRUPT_STATUS		= 1,
+    TX_SET_CONFIG				= 2,
+    BOTH_QUERY_CONFIG			= 3,
+    RX_TX_STATUS				= 4,
+    RX_DBGINFO_FEEDBACK		= 5,
+    RX_TX_PER_PKT_FEEDBACK		= 6,
+    RX_TX_RATE_HISTORY		= 7,
+    RX_CMD_ELE_MAX
+}cmpk_element_e;
+
+#if 0
+typedef enum _rt_status{
+        RT_STATUS_SUCCESS,
+        RT_STATUS_FAILURE,
+        RT_STATUS_PENDING,
+        RT_STATUS_RESOURCE
+}rt_status,*prt_status;
+#endif
+
+extern bool cmpk_message_handle_tx(struct net_device *dev, u8* codevirtualaddress, u32 packettype, u32 buffer_len);
+
+extern  u32 cmpk_message_handle_rx(struct net_device *dev, struct ieee80211_rx_stats * pstats);
+extern bool SendTxCommandPacket( struct net_device *dev, void* pData, u32 DataLen);
+
+
+#endif
diff --git a/drivers/staging/rtl8192su/r819xU_firmware.c b/drivers/staging/rtl8192su/r819xU_firmware.c
new file mode 100644
index 00000000000..219f71e8cda
--- /dev/null
+++ b/drivers/staging/rtl8192su/r819xU_firmware.c
@@ -0,0 +1,707 @@
+/**************************************************************************************************
+ * Procedure:    Init boot code/firmware code/data session
+ *
+ * Description: This routine will intialize firmware. If any error occurs during the initialization
+ * 		process, the routine shall terminate immediately and return fail.
+ *		NIC driver should call NdisOpenFile only from MiniportInitialize.
+ *
+ * Arguments:   The pointer of the adapter
+
+ * Returns:
+ *        NDIS_STATUS_FAILURE - the following initialization process should be terminated
+ *        NDIS_STATUS_SUCCESS - if firmware initialization process success
+**************************************************************************************************/
+//#include "ieee80211.h"
+#include "r8192U.h"
+#include "r8192U_hw.h"
+#include "r819xU_firmware_img.h"
+#include "r819xU_firmware.h"
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+#include <linux/firmware.h>
+#endif
+void firmware_init_param(struct net_device *dev)
+{
+	struct r8192_priv 	*priv = ieee80211_priv(dev);
+	rt_firmware		*pfirmware = priv->pFirmware;
+
+	pfirmware->cmdpacket_frag_thresold = GET_COMMAND_PACKET_FRAG_THRESHOLD(MAX_TRANSMIT_BUFFER_SIZE);
+}
+
+/*
+ * segment the img and use the ptr and length to remember info on each segment
+ *
+ */
+bool fw_download_code(struct net_device *dev, u8 *code_virtual_address, u32 buffer_len)
+{
+	struct r8192_priv   *priv = ieee80211_priv(dev);
+	bool 		    rt_status = true;
+	u16		    frag_threshold;
+	u16		    frag_length, frag_offset = 0;
+	//u16		    total_size;
+	int		    i;
+
+	rt_firmware	    *pfirmware = priv->pFirmware;
+	struct sk_buff	    *skb;
+	unsigned char	    *seg_ptr;
+	cb_desc		    *tcb_desc;
+	u8                  bLastIniPkt;
+
+	firmware_init_param(dev);
+	//Fragmentation might be required
+	frag_threshold = pfirmware->cmdpacket_frag_thresold;
+	do {
+		if((buffer_len - frag_offset) > frag_threshold) {
+			frag_length = frag_threshold ;
+			bLastIniPkt = 0;
+
+		} else {
+			frag_length = buffer_len - frag_offset;
+			bLastIniPkt = 1;
+
+		}
+
+		/* Allocate skb buffer to contain firmware info and tx descriptor info
+		 * add 4 to avoid packet appending overflow.
+		 * */
+		#ifdef RTL8192U
+		skb  = dev_alloc_skb(USB_HWDESC_HEADER_LEN + frag_length + 4);
+		#else
+		skb  = dev_alloc_skb(frag_length + 4);
+		#endif
+		memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev));
+		tcb_desc = (cb_desc*)(skb->cb + MAX_DEV_ADDR_SIZE);
+		tcb_desc->queue_index = TXCMD_QUEUE;
+		tcb_desc->bCmdOrInit = DESC_PACKET_TYPE_INIT;
+		tcb_desc->bLastIniPkt = bLastIniPkt;
+
+		#ifdef RTL8192U
+		skb_reserve(skb, USB_HWDESC_HEADER_LEN);
+		#endif
+		seg_ptr = skb->data;
+		/*
+		 * Transform from little endian to big endian
+                 * and pending  zero
+		 */
+		for(i=0 ; i < frag_length; i+=4) {
+			*seg_ptr++ = ((i+0)<frag_length)?code_virtual_address[i+3]:0;
+			*seg_ptr++ = ((i+1)<frag_length)?code_virtual_address[i+2]:0;
+			*seg_ptr++ = ((i+2)<frag_length)?code_virtual_address[i+1]:0;
+			*seg_ptr++ = ((i+3)<frag_length)?code_virtual_address[i+0]:0;
+		}
+		tcb_desc->txbuf_size= (u16)i;
+		skb_put(skb, i);
+
+		if(!priv->ieee80211->check_nic_enough_desc(dev,tcb_desc->queue_index)||
+			(!skb_queue_empty(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index]))||\
+			(priv->ieee80211->queue_stop) ) {
+			RT_TRACE(COMP_FIRMWARE,"=====================================================> tx full!\n");
+			skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb);
+		} else {
+			priv->ieee80211->softmac_hard_start_xmit(skb,dev);
+		}
+
+		code_virtual_address += frag_length;
+		frag_offset += frag_length;
+
+	}while(frag_offset < buffer_len);
+
+	return rt_status;
+
+#if 0
+cmdsend_downloadcode_fail:
+	rt_status = false;
+	RT_TRACE(COMP_ERR, "CmdSendDownloadCode fail !!\n");
+	return rt_status;
+#endif
+}
+
+bool
+fwSendNullPacket(
+	struct net_device *dev,
+	u32			Length
+)
+{
+	bool	rtStatus = true;
+	struct r8192_priv   *priv = ieee80211_priv(dev);
+	struct sk_buff	    *skb;
+	cb_desc		    *tcb_desc;
+	unsigned char	    *ptr_buf;
+	bool	bLastInitPacket = false;
+
+	//PlatformAcquireSpinLock(Adapter, RT_TX_SPINLOCK);
+
+	//Get TCB and local buffer from common pool. (It is shared by CmdQ, MgntQ, and USB coalesce DataQ)
+	skb  = dev_alloc_skb(Length+ 4);
+	memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev));
+	tcb_desc = (cb_desc*)(skb->cb + MAX_DEV_ADDR_SIZE);
+	tcb_desc->queue_index = TXCMD_QUEUE;
+	tcb_desc->bCmdOrInit = DESC_PACKET_TYPE_INIT;
+	tcb_desc->bLastIniPkt = bLastInitPacket;
+	ptr_buf = skb_put(skb, Length);
+	memset(ptr_buf,0,Length);
+	tcb_desc->txbuf_size= (u16)Length;
+
+	if(!priv->ieee80211->check_nic_enough_desc(dev,tcb_desc->queue_index)||
+			(!skb_queue_empty(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index]))||\
+			(priv->ieee80211->queue_stop) ) {
+			RT_TRACE(COMP_FIRMWARE,"===================NULL packet==================================> tx full!\n");
+			skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb);
+		} else {
+			priv->ieee80211->softmac_hard_start_xmit(skb,dev);
+		}
+
+	//PlatformReleaseSpinLock(Adapter, RT_TX_SPINLOCK);
+	return rtStatus;
+}
+
+#if 0
+/*
+ * Procedure  :   Download code into IMEM or DMEM
+ * Description:   This routine will intialize firmware. If any error occurs during the initialization
+ *				process, the routine shall terminate immediately and return fail.
+ *				The routine copy virtual address get from opening of file into shared memory
+ *				allocated during initialization. If code size larger than a conitneous shared
+ *				memory may contain, the code should be divided into several section.
+ *				!!!NOTES This finction should only be called during MPInitialization because
+ *				A NIC driver should call NdisOpenFile only from MiniportInitialize.
+ * Arguments :    The pointer of the adapter
+ *			   Code address (Virtual address, should fill descriptor with physical address)
+ *			   Code size
+ * Returns  :
+ *        RT_STATUS_FAILURE - the following initialization process should be terminated
+ *        RT_STATUS_SUCCESS - if firmware initialization process success
+ */
+bool fwsend_download_code(struct net_device *dev)
+{
+	struct r8192_priv 	*priv = ieee80211_priv(dev);
+	rt_firmware		*pfirmware = (rt_firmware*)(&priv->firmware);
+
+	bool			rt_status = true;
+	u16			length = 0;
+	u16			offset = 0;
+	u16			frag_threhold;
+	bool			last_init_packet = false;
+	u32			check_txcmdwait_queueemptytime = 100000;
+	u16			cmd_buf_len;
+	u8			*ptr_cmd_buf;
+
+	/* reset to 0 for first segment of img download */
+	pfirmware->firmware_seg_index = 1;
+
+	if(pfirmware->firmware_seg_index == pfirmware->firmware_seg_maxnum) {
+		last_init_packet = 1;
+	}
+
+	cmd_buf_len = pfirmware->firmware_seg_container[pfirmware->firmware_seg_index-1].seg_size;
+	ptr_cmd_buf = pfirmware->firmware_seg_container[pfirmware->firmware_seg_index-1].seg_ptr;
+	rtl819xU_tx_cmd(dev, ptr_cmd_buf, cmd_buf_len, last_init_packet, DESC_PACKET_TYPE_INIT);
+
+	rt_status = true;
+	return rt_status;
+}
+#endif
+
+//-----------------------------------------------------------------------------
+// Procedure:    Check whether main code is download OK. If OK, turn on CPU
+//
+// Description:   CPU register locates in different page against general register.
+//			    Switch to CPU register in the begin and switch back before return
+//
+//
+// Arguments:   The pointer of the adapter
+//
+// Returns:
+//        NDIS_STATUS_FAILURE - the following initialization process should be terminated
+//        NDIS_STATUS_SUCCESS - if firmware initialization process success
+//-----------------------------------------------------------------------------
+bool CPUcheck_maincodeok_turnonCPU(struct net_device *dev)
+{
+	struct r8192_priv  *priv = ieee80211_priv(dev);
+	bool rt_status = true;
+	int  check_putcodeOK_time = 200000, check_bootOk_time = 200000;
+	u32  CPU_status = 0;
+
+	/* Check whether put code OK */
+	do {
+		CPU_status = read_nic_dword(dev, CPU_GEN);
+
+		if((CPU_status&CPU_GEN_PUT_CODE_OK) || (priv->usb_error==true))
+			break;
+
+	}while(check_putcodeOK_time--);
+
+	if(!(CPU_status&CPU_GEN_PUT_CODE_OK)) {
+		RT_TRACE(COMP_ERR, "Download Firmware: Put code fail!\n");
+		goto CPUCheckMainCodeOKAndTurnOnCPU_Fail;
+	} else {
+		RT_TRACE(COMP_FIRMWARE, "Download Firmware: Put code ok!\n");
+	}
+
+	/* Turn On CPU */
+	CPU_status = read_nic_dword(dev, CPU_GEN);
+	write_nic_byte(dev, CPU_GEN, (u8)((CPU_status|CPU_GEN_PWR_STB_CPU)&0xff));
+	mdelay(1000);
+
+	/* Check whether CPU boot OK */
+	do {
+		CPU_status = read_nic_dword(dev, CPU_GEN);
+
+		if((CPU_status&CPU_GEN_BOOT_RDY)||(priv->usb_error == true))
+			break;
+	}while(check_bootOk_time--);
+
+	if(!(CPU_status&CPU_GEN_BOOT_RDY)) {
+		goto CPUCheckMainCodeOKAndTurnOnCPU_Fail;
+	} else {
+		RT_TRACE(COMP_FIRMWARE, "Download Firmware: Boot ready!\n");
+	}
+
+	return rt_status;
+
+CPUCheckMainCodeOKAndTurnOnCPU_Fail:
+	RT_TRACE(COMP_ERR, "ERR in %s()\n", __FUNCTION__);
+	rt_status = FALSE;
+	return rt_status;
+}
+
+bool CPUcheck_firmware_ready(struct net_device *dev)
+{
+	struct r8192_priv  *priv = ieee80211_priv(dev);
+	bool		rt_status = true;
+	int		check_time = 200000;
+	u32		CPU_status = 0;
+
+	/* Check Firmware Ready */
+	do {
+		CPU_status = read_nic_dword(dev, CPU_GEN);
+
+		if((CPU_status&CPU_GEN_FIRM_RDY)||(priv->usb_error == true))
+			break;
+
+	}while(check_time--);
+
+	if(!(CPU_status&CPU_GEN_FIRM_RDY))
+		goto CPUCheckFirmwareReady_Fail;
+	else
+		RT_TRACE(COMP_FIRMWARE, "Download Firmware: Firmware ready!\n");
+
+	return rt_status;
+
+CPUCheckFirmwareReady_Fail:
+	RT_TRACE(COMP_ERR, "ERR in %s()\n", __FUNCTION__);
+	rt_status = false;
+	return rt_status;
+
+}
+
+bool init_firmware(struct net_device *dev)
+{
+	struct r8192_priv 	*priv = ieee80211_priv(dev);
+	bool			rt_status = TRUE;
+
+	u8			*firmware_img_buf[3] = { &rtl8190_fwboot_array[0],
+						   	 &rtl8190_fwmain_array[0],
+						   	 &rtl8190_fwdata_array[0]};
+
+	u32			firmware_img_len[3] = { sizeof(rtl8190_fwboot_array),
+						   	sizeof(rtl8190_fwmain_array),
+						   	sizeof(rtl8190_fwdata_array)};
+	u32			file_length = 0;
+	u8			*mapped_file = NULL;
+	u32			init_step = 0;
+	opt_rst_type_e	rst_opt = OPT_SYSTEM_RESET;
+	firmware_init_step_e 	starting_state = FW_INIT_STEP0_BOOT;
+
+	rt_firmware		*pfirmware = priv->pFirmware;
+	const struct firmware 	*fw_entry;
+	const char *fw_name[3] = { "RTL8192U/boot.img",
+                           "RTL8192U/main.img",
+			   "RTL8192U/data.img"};
+	int rc;
+
+	RT_TRACE(COMP_FIRMWARE, " PlatformInitFirmware()==>\n");
+
+	if (pfirmware->firmware_status == FW_STATUS_0_INIT ) {
+		/* it is called by reset */
+		rst_opt = OPT_SYSTEM_RESET;
+		starting_state = FW_INIT_STEP0_BOOT;
+		// TODO: system reset
+
+	}else if(pfirmware->firmware_status == FW_STATUS_5_READY) {
+		/* it is called by Initialize */
+		rst_opt = OPT_FIRMWARE_RESET;
+		starting_state = FW_INIT_STEP2_DATA;
+	}else {
+		 RT_TRACE(COMP_FIRMWARE, "PlatformInitFirmware: undefined firmware state\n");
+	}
+
+	/*
+	 * Download boot, main, and data image for System reset.
+	 * Download data image for firmware reseta
+	 */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+	priv->firmware_source = FW_SOURCE_HEADER_FILE;
+#else
+	priv->firmware_source = FW_SOURCE_IMG_FILE;
+#endif
+	for(init_step = starting_state; init_step <= FW_INIT_STEP2_DATA; init_step++) {
+		/*
+		 * Open Image file, and map file to contineous memory if open file success.
+		 * or read image file from array. Default load from IMG file
+		 */
+		if(rst_opt == OPT_SYSTEM_RESET) {
+			switch(priv->firmware_source) {
+				case FW_SOURCE_IMG_FILE:
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+					if(pfirmware->firmware_buf_size[init_step] == 0) {
+						rc = request_firmware(&fw_entry, fw_name[init_step],&priv->udev->dev);
+						if(rc < 0 ) {
+							RT_TRACE(COMP_ERR, "request firmware fail!\n");
+							goto download_firmware_fail;
+						}
+
+						if(fw_entry->size > sizeof(pfirmware->firmware_buf[init_step])) {
+							//RT_TRACE(COMP_ERR, "img file size exceed the container buffer fail!\n");
+							 RT_TRACE(COMP_FIRMWARE, "img file size exceed the container buffer fail!, entry_size = %d, buf_size = %d\n",fw_entry->size,sizeof(pfirmware->firmware_buf[init_step]));
+
+							goto download_firmware_fail;
+						}
+
+						if(init_step != FW_INIT_STEP1_MAIN) {
+							memcpy(pfirmware->firmware_buf[init_step],fw_entry->data,fw_entry->size);
+							pfirmware->firmware_buf_size[init_step] = fw_entry->size;
+						} else {
+#ifdef RTL8190P
+							memcpy(pfirmware->firmware_buf[init_step],fw_entry->data,fw_entry->size);
+							pfirmware->firmware_buf_size[init_step] = fw_entry->size;
+#else
+							memset(pfirmware->firmware_buf[init_step],0,128);
+							memcpy(&pfirmware->firmware_buf[init_step][128],fw_entry->data,fw_entry->size);
+							mapped_file = pfirmware->firmware_buf[init_step];
+							pfirmware->firmware_buf_size[init_step] = fw_entry->size+128;
+#endif
+						}
+						//pfirmware->firmware_buf_size = file_length;
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+						if(rst_opt == OPT_SYSTEM_RESET) {
+							release_firmware(fw_entry);
+						}
+#endif
+					}
+					mapped_file = pfirmware->firmware_buf[init_step];
+					file_length = pfirmware->firmware_buf_size[init_step];
+#endif
+
+					break;
+
+				case FW_SOURCE_HEADER_FILE:
+					mapped_file =  firmware_img_buf[init_step];
+					file_length  = firmware_img_len[init_step];
+					if(init_step == FW_INIT_STEP2_DATA) {
+						memcpy(pfirmware->firmware_buf[init_step], mapped_file, file_length);
+						pfirmware->firmware_buf_size[init_step] = file_length;
+					}
+					break;
+
+				default:
+					break;
+			}
+
+
+		}else if(rst_opt == OPT_FIRMWARE_RESET ) {
+			/* we only need to download data.img here */
+			mapped_file = pfirmware->firmware_buf[init_step];
+			file_length = pfirmware->firmware_buf_size[init_step];
+		}
+
+		/* Download image file */
+		/* The firmware download process is just as following,
+		 * 1. that is each packet will be segmented and inserted to the wait queue.
+		 * 2. each packet segment will be put in the skb_buff packet.
+		 * 3. each skb_buff packet data content will already include the firmware info
+		 *   and Tx descriptor info
+		 * */
+		rt_status = fw_download_code(dev,mapped_file,file_length);
+
+		if(rt_status != TRUE) {
+			goto download_firmware_fail;
+		}
+
+		switch(init_step) {
+			case FW_INIT_STEP0_BOOT:
+				/* Download boot
+				 * initialize command descriptor.
+				 * will set polling bit when firmware code is also configured
+				 */
+				pfirmware->firmware_status = FW_STATUS_1_MOVE_BOOT_CODE;
+#ifdef RTL8190P
+				// To initialize IMEM, CPU move code  from 0x80000080, hence, we send 0x80 byte packet
+				rt_status = fwSendNullPacket(dev, RTL8190_CPU_START_OFFSET);
+				if(rt_status != true)
+				{
+					RT_TRACE(COMP_INIT, "fwSendNullPacket() fail ! \n");
+					goto  download_firmware_fail;
+				}
+#endif
+				//mdelay(1000);
+				/*
+				 * To initialize IMEM, CPU move code  from 0x80000080,
+				 * hence, we send 0x80 byte packet
+				 */
+				break;
+
+			case FW_INIT_STEP1_MAIN:
+				/* Download firmware code. Wait until Boot Ready and Turn on CPU */
+				pfirmware->firmware_status = FW_STATUS_2_MOVE_MAIN_CODE;
+
+				/* Check Put Code OK and Turn On CPU */
+				rt_status = CPUcheck_maincodeok_turnonCPU(dev);
+				if(rt_status != TRUE) {
+					RT_TRACE(COMP_ERR, "CPUcheck_maincodeok_turnonCPU fail!\n");
+					goto download_firmware_fail;
+				}
+
+				pfirmware->firmware_status = FW_STATUS_3_TURNON_CPU;
+				break;
+
+			case FW_INIT_STEP2_DATA:
+				/* download initial data code */
+				pfirmware->firmware_status = FW_STATUS_4_MOVE_DATA_CODE;
+				mdelay(1);
+
+				rt_status = CPUcheck_firmware_ready(dev);
+				if(rt_status != TRUE) {
+					RT_TRACE(COMP_ERR, "CPUcheck_firmware_ready fail(%d)!\n",rt_status);
+					goto download_firmware_fail;
+				}
+
+				/* wait until data code is initialized ready.*/
+				pfirmware->firmware_status = FW_STATUS_5_READY;
+				break;
+		}
+	}
+
+	RT_TRACE(COMP_FIRMWARE, "Firmware Download Success\n");
+	//assert(pfirmware->firmware_status == FW_STATUS_5_READY, ("Firmware Download Fail\n"));
+
+	return rt_status;
+
+download_firmware_fail:
+	RT_TRACE(COMP_ERR, "ERR in %s()\n", __FUNCTION__);
+	rt_status = FALSE;
+	return rt_status;
+
+}
+
+#if 0
+/*
+ * Procedure:   (1)  Transform firmware code from little endian to big endian if required.
+ *	        (2)  Number of bytes in Firmware downloading should be multiple
+ *	   	     of 4 bytes. If length is not multiple of 4 bytes, appending of zeros is required
+ *
+ */
+void CmdAppendZeroAndEndianTransform(
+	u1Byte	*pDst,
+	u1Byte	*pSrc,
+	u2Byte   	*pLength)
+{
+
+	u2Byte	ulAppendBytes = 0, i;
+	u2Byte	ulLength = *pLength;
+
+//test only
+	//memset(pDst, 0xcc, 12);
+
+
+	/* Transform from little endian to big endian */
+//#if DEV_BUS_TYPE==PCI_INTERFACE
+#if 0
+	for( i=0 ; i<(*pLength) ; i+=4)
+	{
+		if((i+3) < (*pLength))	pDst[i+0] = pSrc[i+3];
+		if((i+2) < (*pLength))	pDst[i+1] = pSrc[i+2];
+		if((i+1) < (*pLength))	pDst[i+2] = pSrc[i+1];
+		if((i+0) < (*pLength))	pDst[i+3] = pSrc[i+0];
+	}
+#else
+	pDst += USB_HWDESC_HEADER_LEN;
+	ulLength -= USB_HWDESC_HEADER_LEN;
+
+	for( i=0 ; i<ulLength ; i+=4) {
+		if((i+3) < ulLength)	pDst[i+0] = pSrc[i+3];
+		if((i+2) < ulLength)	pDst[i+1] = pSrc[i+2];
+		if((i+1) < ulLength)	pDst[i+2] = pSrc[i+1];
+		if((i+0) < ulLength)	pDst[i+3] = pSrc[i+0];
+
+	}
+#endif
+
+	//1(2) Append Zero
+	if(  ((*pLength) % 4)  >0)
+	{
+		ulAppendBytes = 4-((*pLength) % 4);
+
+		for(i=0 ; i<ulAppendBytes; i++)
+			pDst[  4*((*pLength)/4)  + i ] = 0x0;
+
+		*pLength += ulAppendBytes;
+	}
+}
+#endif
+
+#if 0
+RT_STATUS
+CmdSendPacket(
+	PADAPTER				Adapter,
+	PRT_TCB					pTcb,
+	PRT_TX_LOCAL_BUFFER 			pBuf,
+	u4Byte					BufferLen,
+	u4Byte					PacketType,
+	BOOLEAN					bLastInitPacket
+	)
+{
+	s2Byte		i;
+	u1Byte		QueueID;
+	u2Byte		firstDesc,curDesc = 0;
+	u2Byte		FragIndex=0, FragBufferIndex=0;
+
+	RT_STATUS	rtStatus = RT_STATUS_SUCCESS;
+
+	CmdInitTCB(Adapter, pTcb, pBuf, BufferLen);
+
+
+	if(CmdCheckFragment(Adapter, pTcb, pBuf))
+		CmdFragmentTCB(Adapter, pTcb);
+	else
+		pTcb->FragLength[0] = (u2Byte)pTcb->BufferList[0].Length;
+
+	QueueID=pTcb->SpecifiedQueueID;
+#if DEV_BUS_TYPE!=USB_INTERFACE
+	firstDesc=curDesc=Adapter->NextTxDescToFill[QueueID];
+#endif
+
+#if DEV_BUS_TYPE!=USB_INTERFACE
+	if(VacancyTxDescNum(Adapter, QueueID) > pTcb->BufferCount)
+#else
+	if(PlatformIsTxQueueAvailable(Adapter, QueueID, pTcb->BufferCount) &&
+		RTIsListEmpty(&Adapter->TcbWaitQueue[QueueID]))
+#endif
+	{
+		pTcb->nDescUsed=0;
+
+		for(i=0 ; i<pTcb->BufferCount ; i++)
+		{
+			Adapter->HalFunc.TxFillCmdDescHandler(
+				Adapter,
+				pTcb,
+				QueueID,							//QueueIndex
+				curDesc,							//index
+				FragBufferIndex==0,						//bFirstSeg
+				FragBufferIndex==(pTcb->FragBufCount[FragIndex]-1),		//bLastSeg
+				pTcb->BufferList[i].VirtualAddress,				//VirtualAddress
+				pTcb->BufferList[i].PhysicalAddressLow,				//PhyAddressLow
+				pTcb->BufferList[i].Length,					//BufferLen
+				i!=0,								//bSetOwnBit
+				(i==(pTcb->BufferCount-1)) && bLastInitPacket,			//bLastInitPacket
+				PacketType,							//DescPacketType
+				pTcb->FragLength[FragIndex]					//PktLen
+				);
+
+			if(FragBufferIndex==(pTcb->FragBufCount[FragIndex]-1))
+			{ // Last segment of the fragment.
+				pTcb->nFragSent++;
+			}
+
+			FragBufferIndex++;
+			if(FragBufferIndex==pTcb->FragBufCount[FragIndex])
+			{
+				FragIndex++;
+				FragBufferIndex=0;
+			}
+
+#if DEV_BUS_TYPE!=USB_INTERFACE
+			curDesc=(curDesc+1)%Adapter->NumTxDesc[QueueID];
+#endif
+			pTcb->nDescUsed++;
+		}
+
+#if DEV_BUS_TYPE!=USB_INTERFACE
+		RTInsertTailList(&Adapter->TcbBusyQueue[QueueID], &pTcb->List);
+		IncrementTxDescToFill(Adapter, QueueID, pTcb->nDescUsed);
+		Adapter->HalFunc.SetTxDescOWNHandler(Adapter, QueueID, firstDesc);
+		// TODO: should call poll use QueueID
+		Adapter->HalFunc.TxPollingHandler(Adapter, TXCMD_QUEUE);
+#endif
+	}
+	else
+#if DEV_BUS_TYPE!=USB_INTERFACE
+		goto CmdSendPacket_Fail;
+#else
+	{
+		pTcb->bLastInitPacket = bLastInitPacket;
+		RTInsertTailList(&Adapter->TcbWaitQueue[pTcb->SpecifiedQueueID], &pTcb->List);
+	}
+#endif
+
+	return rtStatus;
+
+#if DEV_BUS_TYPE!=USB_INTERFACE
+CmdSendPacket_Fail:
+	rtStatus = RT_STATUS_FAILURE;
+	return rtStatus;
+#endif
+
+}
+#endif
+
+
+
+
+#if 0
+RT_STATUS
+FWSendNullPacket(
+	IN	PADAPTER		Adapter,
+	IN	u4Byte			Length
+)
+{
+	RT_STATUS	rtStatus = RT_STATUS_SUCCESS;
+
+
+	PRT_TCB					pTcb;
+	PRT_TX_LOCAL_BUFFER 	pBuf;
+	BOOLEAN					bLastInitPacket = FALSE;
+
+	PlatformAcquireSpinLock(Adapter, RT_TX_SPINLOCK);
+
+#if DEV_BUS_TYPE==USB_INTERFACE
+	Length += USB_HWDESC_HEADER_LEN;
+#endif
+
+	//Get TCB and local buffer from common pool. (It is shared by CmdQ, MgntQ, and USB coalesce DataQ)
+	if(MgntGetBuffer(Adapter, &pTcb, &pBuf))
+	{
+		PlatformZeroMemory(pBuf->Buffer.VirtualAddress, Length);
+		rtStatus = CmdSendPacket(Adapter, pTcb, pBuf, Length, DESC_PACKET_TYPE_INIT, bLastInitPacket);	//0 : always set LastInitPacket to zero
+//#if HAL_CODE_BASE != RTL8190HW
+//		// TODO: for test only
+//		ReturnTCB(Adapter, pTcb, RT_STATUS_SUCCESS);
+//#endif
+		if(rtStatus == RT_STATUS_FAILURE)
+			goto CmdSendNullPacket_Fail;
+	}else
+		goto CmdSendNullPacket_Fail;
+
+	PlatformReleaseSpinLock(Adapter, RT_TX_SPINLOCK);
+	return rtStatus;
+
+
+CmdSendNullPacket_Fail:
+	PlatformReleaseSpinLock(Adapter, RT_TX_SPINLOCK);
+	rtStatus = RT_STATUS_FAILURE;
+	RT_ASSERT(rtStatus == RT_STATUS_SUCCESS, ("CmdSendDownloadCode fail !!\n"));
+	return rtStatus;
+}
+#endif
+
+
diff --git a/drivers/staging/rtl8192su/r819xU_firmware.h b/drivers/staging/rtl8192su/r819xU_firmware.h
new file mode 100644
index 00000000000..10801be014e
--- /dev/null
+++ b/drivers/staging/rtl8192su/r819xU_firmware.h
@@ -0,0 +1,106 @@
+#ifndef __INC_FIRMWARE_H
+#define __INC_FIRMWARE_H
+
+#define RTL8190_CPU_START_OFFSET	0x80
+/* TODO: this definition is TBD */
+//#define USB_HWDESC_HEADER_LEN	0
+
+/* It should be double word alignment */
+//#if DEV_BUS_TYPE==PCI_INTERFACE
+//#define GET_COMMAND_PACKET_FRAG_THRESHOLD(v)	4*(v/4) - 8
+//#else
+#define GET_COMMAND_PACKET_FRAG_THRESHOLD(v)	(4*(v/4) - 8 - USB_HWDESC_HEADER_LEN)
+//#endif
+
+typedef enum _firmware_init_step{
+	FW_INIT_STEP0_BOOT = 0,
+	FW_INIT_STEP1_MAIN = 1,
+	FW_INIT_STEP2_DATA = 2,
+}firmware_init_step_e;
+
+typedef enum _opt_rst_type{
+	OPT_SYSTEM_RESET = 0,
+	OPT_FIRMWARE_RESET = 1,
+}opt_rst_type_e;
+
+/* due to rtl8192 firmware */
+typedef enum _desc_packet_type_e{
+	DESC_PACKET_TYPE_INIT = 0,
+	DESC_PACKET_TYPE_NORMAL = 1,
+}desc_packet_type_e;
+
+typedef enum _firmware_source{
+	FW_SOURCE_IMG_FILE = 0,
+	FW_SOURCE_HEADER_FILE = 1,              //from header file
+}firmware_source_e, *pfirmware_source_e;
+
+typedef enum _firmware_status{
+	FW_STATUS_0_INIT = 0,
+	FW_STATUS_1_MOVE_BOOT_CODE = 1,
+	FW_STATUS_2_MOVE_MAIN_CODE = 2,
+	FW_STATUS_3_TURNON_CPU = 3,
+	FW_STATUS_4_MOVE_DATA_CODE = 4,
+	FW_STATUS_5_READY = 5,
+}firmware_status_e;
+
+typedef struct _rt_firmare_seg_container {
+	u16     seg_size;
+	u8      *seg_ptr;
+}fw_seg_container, *pfw_seg_container;
+
+#define RTL8190_MAX_FIRMWARE_CODE_SIZE  64000   //64k
+#define MAX_FW_INIT_STEP                3
+typedef struct _rt_firmware{
+	firmware_status_e firmware_status;
+	u16               cmdpacket_frag_thresold;
+	u8                firmware_buf[MAX_FW_INIT_STEP][RTL8190_MAX_FIRMWARE_CODE_SIZE];
+	u16               firmware_buf_size[MAX_FW_INIT_STEP];
+}rt_firmware, *prt_firmware;
+
+typedef struct _rt_firmware_info_819xUsb{
+	u8		sz_info[16];
+}rt_firmware_info_819xUsb, *prt_firmware_info_819xUsb;
+
+#if 0
+/* CPU related */
+RT_STATUS
+CPUCheckMainCodeOKAndTurnOnCPU(
+	IN	PADAPTER			Adapter
+	);
+
+RT_STATUS
+CPUCheckFirmwareReady(
+	IN	PADAPTER			Adapter
+	);
+
+/* Firmware related */
+VOID
+FWInitializeParameters(
+	IN	PADAPTER		Adapter
+	);
+
+RT_STATUS
+FWSendDownloadCode(
+	IN	PADAPTER		Adapter,
+	IN	pu1Byte			CodeVirtualAddrress,
+	IN	u4Byte			BufferLen
+	);
+
+RT_STATUS
+FWSendNullPacket(
+	IN	PADAPTER		Adapter,
+	IN	u4Byte			Length
+	);
+
+RT_STATUS
+CmdSendPacket(
+	PADAPTER				Adapter,
+	PRT_TCB					pTcb,
+	PRT_TX_LOCAL_BUFFER 	pBuf,
+	u4Byte					BufferLen,
+	u4Byte					PacketType,
+	BOOLEAN					bLastInitPacket
+	);
+#endif
+#endif
+
diff --git a/drivers/staging/rtl8192su/r819xU_firmware_img.c b/drivers/staging/rtl8192su/r819xU_firmware_img.c
new file mode 100644
index 00000000000..29b656d7d82
--- /dev/null
+++ b/drivers/staging/rtl8192su/r819xU_firmware_img.c
@@ -0,0 +1,3447 @@
+/*Created on  2008/ 7/16,  5:31*/
+#include <linux/types.h>
+
+u8 rtl8190_fwboot_array[] = {
+0x10,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x3c,0x08,0xbf,0xc0,0x25,0x08,0x00,0x08,
+0x3c,0x09,0xb0,0x03,0xad,0x28,0x00,0x20,0x40,0x80,0x68,0x00,0x00,0x00,0x00,0x00,
+0x3c,0x0a,0xd0,0x00,0x40,0x8a,0x60,0x00,0x00,0x00,0x00,0x00,0x3c,0x08,0x80,0x01,
+0x25,0x08,0xb0,0x50,0x24,0x09,0x00,0x01,0x3c,0x01,0x7f,0xff,0x34,0x21,0xff,0xff,
+0x01,0x01,0x50,0x24,0x00,0x09,0x48,0x40,0x35,0x29,0x00,0x01,0x01,0x2a,0x10,0x2b,
+0x14,0x40,0xff,0xfc,0x00,0x00,0x00,0x00,0x3c,0x0a,0x00,0x00,0x25,0x4a,0x00,0x00,
+0x4c,0x8a,0x00,0x00,0x4c,0x89,0x08,0x00,0x00,0x00,0x00,0x00,0x3c,0x08,0x80,0x01,
+0x25,0x08,0xb0,0x50,0x3c,0x01,0x80,0x00,0x01,0x21,0x48,0x25,0x3c,0x0a,0xbf,0xc0,
+0x25,0x4a,0x00,0x7c,0x3c,0x0b,0xb0,0x03,0xad,0x6a,0x00,0x20,0xad,0x00,0x00,0x00,
+0x21,0x08,0x00,0x04,0x01,0x09,0x10,0x2b,0x14,0x40,0xff,0xf8,0x00,0x00,0x00,0x00,
+0x3c,0x08,0x80,0x01,0x25,0x08,0x7f,0xff,0x24,0x09,0x00,0x01,0x3c,0x01,0x7f,0xff,
+0x34,0x21,0xff,0xff,0x01,0x01,0x50,0x24,0x00,0x09,0x48,0x40,0x35,0x29,0x00,0x01,
+0x01,0x2a,0x10,0x2b,0x14,0x40,0xff,0xfc,0x00,0x00,0x00,0x00,0x3c,0x0a,0x80,0x01,
+0x25,0x4a,0x00,0x00,0x3c,0x01,0x7f,0xff,0x34,0x21,0xff,0xff,0x01,0x41,0x50,0x24,
+0x3c,0x09,0x00,0x01,0x35,0x29,0x7f,0xff,0x4c,0x8a,0x20,0x00,0x4c,0x89,0x28,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x24,0x08,0x04,0x10,
+0x00,0x00,0x00,0x00,0x40,0x88,0xa0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x3c,0x08,0xbf,0xc0,0x00,0x00,0x00,0x00,0x8d,0x09,0x00,0x00,0x00,0x00,0x00,0x00,
+0x3c,0x0a,0xbf,0xc0,0x25,0x4a,0x01,0x20,0x3c,0x0b,0xb0,0x03,0xad,0x6a,0x00,0x20,
+0x3c,0x08,0xb0,0x03,0x8d,0x09,0x00,0x00,0x00,0x00,0x00,0x00,0x35,0x29,0x00,0x10,
+0xad,0x09,0x00,0x00,0x00,0x00,0x00,0x00,0x3c,0x08,0x80,0x00,0x25,0x08,0x4b,0x84,
+0x01,0x00,0x00,0x08,0x00,0x00,0x00,0x00,};
+
+u8 rtl8190_fwmain_array[] = {
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x40,0x04,0x68,0x00,0x40,0x05,0x70,0x00,0x40,0x06,0x40,0x00,0x0c,0x00,0x12,0x94,
+0x00,0x00,0x00,0x00,0x40,0x1a,0x68,0x00,0x33,0x5b,0x00,0x3c,0x17,0x60,0x00,0x09,
+0x00,0x00,0x00,0x00,0x40,0x1b,0x60,0x00,0x00,0x00,0x00,0x00,0x03,0x5b,0xd0,0x24,
+0x40,0x1a,0x70,0x00,0x03,0x40,0x00,0x08,0x42,0x00,0x00,0x10,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x3c,0x02,0xff,0xff,0x34,0x42,0xff,0xff,0x8c,0x43,0x00,0x00,
+0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,0x34,0x63,0x00,0x20,0x24,0x42,0x00,0xd0,
+0xac,0x62,0x00,0x00,0x00,0x00,0x20,0x21,0x27,0x85,0x8b,0x60,0x00,0x85,0x18,0x21,
+0x24,0x84,0x00,0x01,0x28,0x82,0x00,0x0a,0x14,0x40,0xff,0xfc,0xa0,0x60,0x00,0x00,
+0x27,0x82,0x8b,0x6a,0x24,0x04,0x00,0x06,0x24,0x84,0xff,0xff,0xa4,0x40,0x00,0x00,
+0x04,0x81,0xff,0xfd,0x24,0x42,0x00,0x02,0x24,0x02,0x00,0x03,0xa3,0x82,0x8b,0x60,
+0x24,0x02,0x09,0xc4,0x24,0x03,0x01,0x00,0xa7,0x82,0x8b,0x76,0x24,0x02,0x04,0x00,
+0xaf,0x83,0x8b,0x78,0xaf,0x82,0x8b,0x7c,0x24,0x03,0x00,0x0a,0x24,0x02,0x00,0x04,
+0x24,0x05,0x00,0x02,0x24,0x04,0x00,0x01,0xa3,0x83,0x8b,0x62,0xa3,0x82,0x8b,0x68,
+0x24,0x03,0x00,0x01,0x24,0x02,0x02,0x00,0xa3,0x84,0x8b,0x66,0xa3,0x85,0x8b,0x69,
+0xa7,0x82,0x8b,0x6a,0xa7,0x83,0x8b,0x6c,0xa3,0x84,0x8b,0x61,0xa3,0x80,0x8b,0x63,
+0xa3,0x80,0x8b,0x64,0xa3,0x80,0x8b,0x65,0xa3,0x85,0x8b,0x67,0x03,0xe0,0x00,0x08,
+0x00,0x00,0x00,0x00,0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,0x24,0x42,0x01,0x84,
+0x34,0x63,0x00,0x20,0xac,0x62,0x00,0x00,0x27,0x84,0x8b,0x88,0x00,0x00,0x10,0x21,
+0x24,0x42,0x00,0x01,0x00,0x02,0x16,0x00,0x00,0x02,0x16,0x03,0x28,0x43,0x00,0x03,
+0xac,0x80,0xff,0xfc,0xa0,0x80,0x00,0x00,0x14,0x60,0xff,0xf9,0x24,0x84,0x00,0x0c,
+0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,
+0x34,0x63,0x00,0x20,0x24,0x42,0x01,0xc8,0x3c,0x08,0xb0,0x03,0xac,0x62,0x00,0x00,
+0x35,0x08,0x00,0x70,0x8d,0x02,0x00,0x00,0x00,0xa0,0x48,0x21,0x00,0x04,0x26,0x00,
+0x00,0x02,0x2a,0x43,0x00,0x06,0x36,0x00,0x00,0x07,0x3e,0x00,0x00,0x02,0x12,0x03,
+0x29,0x23,0x00,0x03,0x00,0x04,0x56,0x03,0x00,0x06,0x36,0x03,0x00,0x07,0x3e,0x03,
+0x30,0x48,0x00,0x01,0x10,0x60,0x00,0x11,0x30,0xa5,0x00,0x07,0x24,0x02,0x00,0x02,
+0x00,0x49,0x10,0x23,0x00,0x45,0x10,0x07,0x30,0x42,0x00,0x01,0x10,0x40,0x00,0x66,
+0x00,0x00,0x00,0x00,0x8f,0xa2,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x02,0x21,0x43,
+0x11,0x00,0x00,0x10,0x00,0x07,0x20,0x0b,0x15,0x20,0x00,0x06,0x24,0x02,0x00,0x01,
+0x3c,0x02,0xb0,0x05,0x34,0x42,0x01,0x20,0xa4,0x44,0x00,0x00,0x03,0xe0,0x00,0x08,
+0x00,0x00,0x00,0x00,0x11,0x22,0x00,0x04,0x00,0x00,0x00,0x00,0x3c,0x02,0xb0,0x05,
+0x08,0x00,0x00,0x96,0x34,0x42,0x01,0x24,0x3c,0x02,0xb0,0x05,0x08,0x00,0x00,0x96,
+0x34,0x42,0x01,0x22,0x15,0x20,0x00,0x54,0x24,0x02,0x00,0x01,0x3c,0x02,0xb0,0x03,
+0x34,0x42,0x00,0x74,0x90,0x43,0x00,0x00,0x00,0x00,0x00,0x00,0xaf,0x83,0x8b,0x84,
+0x3c,0x02,0xb0,0x03,0x34,0x42,0x00,0x70,0x90,0x43,0x00,0x00,0x00,0x00,0x00,0x00,
+0x30,0x6b,0x00,0x08,0x11,0x60,0x00,0x18,0x00,0x09,0x28,0x40,0x00,0x00,0x40,0x21,
+0x27,0x85,0x8b,0x80,0x8c,0xa3,0x00,0x00,0x8c,0xa2,0x00,0x04,0x00,0x00,0x00,0x00,
+0x00,0x62,0x38,0x23,0x00,0x43,0x10,0x2a,0x10,0x40,0x00,0x3d,0x00,0x00,0x00,0x00,
+0xac,0xa7,0x00,0x00,0x25,0x02,0x00,0x01,0x00,0x02,0x16,0x00,0x00,0x02,0x46,0x03,
+0x29,0x03,0x00,0x03,0x14,0x60,0xff,0xf3,0x24,0xa5,0x00,0x0c,0x3c,0x03,0xb0,0x03,
+0x34,0x63,0x00,0x70,0x90,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x4b,0x10,0x23,
+0xa0,0x62,0x00,0x00,0x00,0x09,0x28,0x40,0x00,0xa9,0x10,0x21,0x00,0x02,0x10,0x80,
+0x27,0x83,0x8b,0x88,0x00,0x0a,0x20,0x0b,0x00,0x43,0x18,0x21,0x10,0xc0,0x00,0x05,
+0x00,0x00,0x38,0x21,0x80,0x62,0x00,0x01,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x05,
+0x00,0x00,0x00,0x00,0x80,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x03,
+0x00,0xa9,0x10,0x21,0x24,0x07,0x00,0x01,0x00,0xa9,0x10,0x21,0x00,0x02,0x30,0x80,
+0x27,0x82,0x8b,0x88,0xa0,0x67,0x00,0x01,0x00,0xc2,0x38,0x21,0x80,0xe3,0x00,0x01,
+0x00,0x00,0x00,0x00,0x10,0x60,0x00,0x07,0x00,0x00,0x00,0x00,0x27,0x83,0x8b,0x80,
+0x00,0xc3,0x18,0x21,0x8c,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x44,0x10,0x21,
+0xac,0x62,0x00,0x00,0x27,0x85,0x8b,0x84,0x27,0x82,0x8b,0x80,0x00,0xc5,0x28,0x21,
+0x00,0xc2,0x10,0x21,0x8c,0x43,0x00,0x00,0x8c,0xa4,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x64,0x18,0x2a,0x14,0x60,0x00,0x03,0x24,0x02,0x00,0x01,0x03,0xe0,0x00,0x08,
+0xa0,0xe2,0x00,0x00,0xa0,0xe0,0x00,0x00,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,
+0x08,0x00,0x00,0xb9,0xac,0xa0,0x00,0x00,0x11,0x22,0x00,0x08,0x00,0x00,0x00,0x00,
+0x3c,0x02,0xb0,0x03,0x34,0x42,0x00,0x7c,0x90,0x43,0x00,0x00,0x00,0x00,0x00,0x00,
+0xaf,0x83,0x8b,0x9c,0x08,0x00,0x00,0xa9,0x3c,0x02,0xb0,0x03,0x3c,0x02,0xb0,0x03,
+0x34,0x42,0x00,0x78,0x90,0x43,0x00,0x00,0x00,0x00,0x00,0x00,0xaf,0x83,0x8b,0x90,
+0x08,0x00,0x00,0xa9,0x3c,0x02,0xb0,0x03,0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,
+0x34,0x63,0x00,0x20,0x24,0x42,0x04,0x18,0x3c,0x05,0xb0,0x03,0xac,0x62,0x00,0x00,
+0x34,0xa5,0x00,0x70,0x8c,0xa2,0x00,0x00,0x90,0x84,0x00,0x08,0x3c,0x06,0xb0,0x03,
+0x00,0x02,0x16,0x00,0x2c,0x83,0x00,0x03,0x34,0xc6,0x00,0x72,0x24,0x07,0x00,0x01,
+0x10,0x60,0x00,0x11,0x00,0x02,0x2f,0xc2,0x90,0xc2,0x00,0x00,0x00,0x00,0x18,0x21,
+0x00,0x02,0x16,0x00,0x10,0xa7,0x00,0x09,0x00,0x02,0x16,0x03,0x14,0x80,0x00,0x0c,
+0x30,0x43,0x00,0x03,0x83,0x82,0x8b,0x88,0x00,0x00,0x00,0x00,0x00,0x02,0x10,0x80,
+0x00,0x43,0x10,0x21,0x00,0x02,0x16,0x00,0x00,0x02,0x1e,0x03,0x3c,0x02,0xb0,0x03,
+0x34,0x42,0x00,0x72,0xa0,0x43,0x00,0x00,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,
+0x30,0x45,0x00,0x05,0x10,0x87,0x00,0x04,0x30,0x43,0x00,0x06,0x93,0x82,0x8b,0xa0,
+0x08,0x00,0x01,0x21,0x00,0x43,0x10,0x21,0x83,0x82,0x8b,0x94,0x00,0x00,0x00,0x00,
+0x00,0x02,0x10,0x40,0x08,0x00,0x01,0x21,0x00,0x45,0x10,0x21,0x10,0x80,0x00,0x05,
+0x00,0x00,0x18,0x21,0x24,0x63,0x00,0x01,0x00,0x64,0x10,0x2b,0x14,0x40,0xff,0xfd,
+0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x3c,0x03,0xb0,0x03,
+0x3c,0x02,0x80,0x00,0x24,0x42,0x04,0xec,0x3c,0x04,0xb0,0x02,0x34,0x63,0x00,0x20,
+0xac,0x62,0x00,0x00,0x34,0x84,0x00,0x08,0x24,0x02,0x00,0x01,0xaf,0x84,0x8b,0xb0,
+0xa3,0x82,0x8b,0xc0,0xa7,0x80,0x8b,0xb4,0xa7,0x80,0x8b,0xb6,0xaf,0x80,0x8b,0xb8,
+0xaf,0x80,0x8b,0xbc,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x3c,0x03,0xb0,0x03,
+0x3c,0x02,0x80,0x00,0x34,0x63,0x00,0x20,0x24,0x42,0x05,0x2c,0x3c,0x04,0xb0,0x03,
+0xac,0x62,0x00,0x00,0x34,0x84,0x00,0xac,0x80,0xa2,0x00,0x15,0x8c,0x83,0x00,0x00,
+0x27,0xbd,0xff,0xf0,0x00,0x43,0x10,0x21,0xac,0x82,0x00,0x00,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x10,0x3c,0x02,0xb0,0x03,0x3c,0x03,0x80,0x00,0x34,0x42,0x00,0x20,
+0x24,0x63,0x05,0x64,0x27,0xbd,0xff,0xe0,0xac,0x43,0x00,0x00,0xaf,0xb1,0x00,0x14,
+0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x18,0x8f,0x90,0x8b,0xb0,0x0c,0x00,0x02,0x9a,
+0x00,0x80,0x88,0x21,0x14,0x40,0x00,0x2a,0x3c,0x02,0x00,0x80,0x16,0x20,0x00,0x02,
+0x34,0x42,0x02,0x01,0x24,0x02,0x02,0x01,0xae,0x02,0x00,0x00,0x97,0x84,0x8b,0xb4,
+0x97,0x82,0x8b,0xb6,0x3c,0x03,0xb0,0x02,0x00,0x83,0x20,0x21,0x24,0x42,0x00,0x04,
+0xa7,0x82,0x8b,0xb6,0xa4,0x82,0x00,0x00,0x8f,0x84,0x8b,0xb8,0x8f,0x82,0x8b,0xb0,
+0x93,0x85,0x8b,0x62,0x24,0x84,0x00,0x01,0x24,0x42,0x00,0x04,0x24,0x03,0x8f,0xff,
+0x3c,0x07,0xb0,0x06,0x3c,0x06,0xb0,0x03,0x00,0x43,0x10,0x24,0x00,0x85,0x28,0x2a,
+0x34,0xe7,0x80,0x18,0xaf,0x82,0x8b,0xb0,0xaf,0x84,0x8b,0xb8,0x10,0xa0,0x00,0x08,
+0x34,0xc6,0x01,0x08,0x8f,0x83,0x8b,0xbc,0x8f,0x84,0x8b,0x7c,0x8c,0xc2,0x00,0x00,
+0x00,0x64,0x18,0x21,0x00,0x43,0x10,0x2b,0x14,0x40,0x00,0x09,0x00,0x00,0x00,0x00,
+0x8c,0xe2,0x00,0x00,0x3c,0x03,0x0f,0x00,0x3c,0x04,0x04,0x00,0x00,0x43,0x10,0x24,
+0x10,0x44,0x00,0x03,0x00,0x00,0x00,0x00,0x0c,0x00,0x04,0x98,0x00,0x00,0x00,0x00,
+0x8f,0xbf,0x00,0x18,0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x20,
+0x27,0xbd,0xff,0xd8,0x3c,0x02,0xb0,0x03,0x3c,0x03,0x80,0x00,0x24,0x63,0x06,0x50,
+0xaf,0xb0,0x00,0x10,0x34,0x42,0x00,0x20,0x8f,0x90,0x8b,0xb0,0xac,0x43,0x00,0x00,
+0xaf,0xb3,0x00,0x1c,0xaf,0xb2,0x00,0x18,0xaf,0xb1,0x00,0x14,0xaf,0xbf,0x00,0x20,
+0x00,0x80,0x88,0x21,0x00,0xa0,0x90,0x21,0x0c,0x00,0x02,0x9a,0x00,0xc0,0x98,0x21,
+0x24,0x07,0x8f,0xff,0x14,0x40,0x00,0x19,0x26,0x03,0x00,0x04,0x24,0x02,0x0e,0x03,
+0xae,0x02,0x00,0x00,0x00,0x67,0x80,0x24,0x26,0x02,0x00,0x04,0xae,0x11,0x00,0x00,
+0x00,0x47,0x80,0x24,0x97,0x86,0x8b,0xb4,0x26,0x03,0x00,0x04,0xae,0x12,0x00,0x00,
+0x00,0x67,0x80,0x24,0xae,0x13,0x00,0x00,0x8f,0x84,0x8b,0xb0,0x3c,0x02,0xb0,0x02,
+0x97,0x85,0x8b,0xb6,0x00,0xc2,0x30,0x21,0x8f,0x82,0x8b,0xb8,0x24,0x84,0x00,0x10,
+0x24,0xa5,0x00,0x10,0x00,0x87,0x20,0x24,0x24,0x42,0x00,0x01,0xa7,0x85,0x8b,0xb6,
+0xaf,0x84,0x8b,0xb0,0xaf,0x82,0x8b,0xb8,0xa4,0xc5,0x00,0x00,0x8f,0xbf,0x00,0x20,
+0x7b,0xb2,0x00,0xfc,0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x28,
+0x27,0xbd,0xff,0xe8,0xaf,0xbf,0x00,0x10,0x94,0x82,0x00,0x04,0x00,0x00,0x00,0x00,
+0x30,0x42,0xe0,0x00,0x14,0x40,0x00,0x14,0x00,0x00,0x00,0x00,0x90,0x82,0x00,0x02,
+0x00,0x00,0x00,0x00,0x30,0x42,0x00,0xfc,0x00,0x82,0x28,0x21,0x8c,0xa4,0x00,0x00,
+0x3c,0x02,0x00,0x70,0x8c,0xa6,0x00,0x08,0x00,0x82,0x10,0x21,0x2c,0x43,0x00,0x06,
+0x10,0x60,0x00,0x09,0x3c,0x03,0x80,0x01,0x00,0x02,0x10,0x80,0x24,0x63,0x01,0xe8,
+0x00,0x43,0x10,0x21,0x8c,0x44,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x08,
+0x00,0x00,0x00,0x00,0xaf,0x86,0x80,0x14,0x8f,0xbf,0x00,0x10,0x00,0x00,0x00,0x00,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x18,0x8c,0xa4,0x00,0x00,0x0c,0x00,0x17,0xb3,
+0x00,0x00,0x00,0x00,0x08,0x00,0x01,0xde,0x00,0x00,0x00,0x00,0x0c,0x00,0x24,0xaa,
+0x00,0xc0,0x20,0x21,0x08,0x00,0x01,0xde,0x00,0x00,0x00,0x00,0x3c,0x02,0xb0,0x03,
+0x34,0x42,0x01,0x08,0x8c,0x44,0x00,0x00,0x8f,0x82,0x80,0x18,0x3c,0x03,0x00,0x0f,
+0x34,0x63,0x42,0x40,0x00,0x43,0x10,0x21,0x00,0x82,0x20,0x2b,0x10,0x80,0x00,0x09,
+0x24,0x03,0x00,0x05,0x8f,0x82,0x83,0x30,0x00,0x00,0x00,0x00,0x24,0x42,0x00,0x01,
+0xaf,0x82,0x83,0x30,0x10,0x43,0x00,0x03,0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,
+0x00,0x00,0x00,0x00,0x3c,0x03,0xb0,0x03,0x8c,0x63,0x01,0x08,0x24,0x02,0x00,0x01,
+0xa3,0x82,0x80,0x11,0xaf,0x80,0x83,0x30,0xaf,0x83,0x80,0x18,0x08,0x00,0x01,0xfb,
+0x00,0x00,0x00,0x00,0x30,0x84,0x00,0xff,0x14,0x80,0x00,0x2f,0x00,0x00,0x00,0x00,
+0x8f,0x82,0x80,0x14,0xa3,0x85,0x83,0x63,0x10,0x40,0x00,0x2b,0x2c,0xa2,0x00,0x04,
+0x14,0x40,0x00,0x06,0x00,0x05,0x10,0x40,0x24,0xa2,0xff,0xfc,0x2c,0x42,0x00,0x08,
+0x10,0x40,0x00,0x09,0x24,0xa2,0xff,0xf0,0x00,0x05,0x10,0x40,0x27,0x84,0x83,0x6c,
+0x00,0x44,0x10,0x21,0x94,0x43,0x00,0x00,0x00,0x00,0x00,0x00,0x24,0x63,0x00,0x01,
+0x03,0xe0,0x00,0x08,0xa4,0x43,0x00,0x00,0x2c,0x42,0x00,0x10,0x14,0x40,0x00,0x0a,
+0x00,0x05,0x10,0x40,0x24,0xa2,0xff,0xe0,0x2c,0x42,0x00,0x10,0x14,0x40,0x00,0x06,
+0x00,0x05,0x10,0x40,0x24,0xa2,0xff,0xd0,0x2c,0x42,0x00,0x10,0x10,0x40,0x00,0x09,
+0x24,0xa2,0xff,0xc0,0x00,0x05,0x10,0x40,0x27,0x84,0x83,0x6c,0x00,0x44,0x10,0x21,
+0x94,0x43,0xff,0xf8,0x00,0x00,0x00,0x00,0x24,0x63,0x00,0x01,0x03,0xe0,0x00,0x08,
+0xa4,0x43,0xff,0xf8,0x2c,0x42,0x00,0x10,0x10,0x40,0x00,0x07,0x00,0x05,0x10,0x40,
+0x27,0x84,0x83,0x6c,0x00,0x44,0x10,0x21,0x94,0x43,0xff,0xf8,0x00,0x00,0x00,0x00,
+0x24,0x63,0x00,0x01,0xa4,0x43,0xff,0xf8,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,
+0x8f,0x86,0x8b,0xb0,0x8f,0x82,0x80,0x14,0x27,0xbd,0xff,0xe8,0xaf,0xbf,0x00,0x10,
+0x10,0x40,0x00,0x2a,0x00,0xc0,0x38,0x21,0x24,0x02,0x00,0x07,0x24,0x03,0xff,0x9c,
+0xa3,0x82,0x83,0x6b,0xa3,0x83,0x83,0x6a,0x27,0x8a,0x83,0x68,0x00,0x00,0x20,0x21,
+0x24,0x09,0x8f,0xff,0x00,0x04,0x10,0x80,0x00,0x4a,0x28,0x21,0x8c,0xa2,0x00,0x00,
+0x24,0xe3,0x00,0x04,0x24,0x88,0x00,0x01,0xac,0xe2,0x00,0x00,0x10,0x80,0x00,0x02,
+0x00,0x69,0x38,0x24,0xac,0xa0,0x00,0x00,0x31,0x04,0x00,0xff,0x2c,0x82,0x00,0x27,
+0x14,0x40,0xff,0xf5,0x00,0x04,0x10,0x80,0x97,0x83,0x8b,0xb6,0x97,0x85,0x8b,0xb4,
+0x3c,0x02,0xb0,0x02,0x24,0x63,0x00,0x9c,0x00,0xa2,0x28,0x21,0x3c,0x04,0xb0,0x06,
+0xa7,0x83,0x8b,0xb6,0x34,0x84,0x80,0x18,0xa4,0xa3,0x00,0x00,0x8c,0x85,0x00,0x00,
+0x24,0x02,0x8f,0xff,0x24,0xc6,0x00,0x9c,0x3c,0x03,0x0f,0x00,0x00,0xc2,0x30,0x24,
+0x00,0xa3,0x28,0x24,0x3c,0x02,0x04,0x00,0xaf,0x86,0x8b,0xb0,0x10,0xa2,0x00,0x03,
+0x00,0x00,0x00,0x00,0x0c,0x00,0x04,0x98,0x00,0x00,0x00,0x00,0x8f,0xbf,0x00,0x10,
+0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x18,0x8f,0x86,0x8b,0xb0,
+0x27,0xbd,0xff,0xc8,0x24,0x02,0x00,0x08,0x24,0x03,0x00,0x20,0xaf,0xbf,0x00,0x30,
+0xa3,0xa2,0x00,0x13,0xa3,0xa3,0x00,0x12,0xa7,0xa4,0x00,0x10,0x00,0xc0,0x28,0x21,
+0x27,0xa9,0x00,0x10,0x00,0x00,0x38,0x21,0x24,0x08,0x8f,0xff,0x00,0x07,0x10,0x80,
+0x00,0x49,0x10,0x21,0x8c,0x44,0x00,0x00,0x24,0xe3,0x00,0x01,0x30,0x67,0x00,0xff,
+0x24,0xa2,0x00,0x04,0x2c,0xe3,0x00,0x08,0xac,0xa4,0x00,0x00,0x14,0x60,0xff,0xf7,
+0x00,0x48,0x28,0x24,0x97,0x83,0x8b,0xb6,0x97,0x85,0x8b,0xb4,0x3c,0x02,0xb0,0x02,
+0x24,0x63,0x00,0x20,0x00,0xa2,0x28,0x21,0x3c,0x04,0xb0,0x06,0xa7,0x83,0x8b,0xb6,
+0x34,0x84,0x80,0x18,0xa4,0xa3,0x00,0x00,0x8c,0x85,0x00,0x00,0x24,0x02,0x8f,0xff,
+0x24,0xc6,0x00,0x20,0x3c,0x03,0x0f,0x00,0x00,0xc2,0x30,0x24,0x00,0xa3,0x28,0x24,
+0x3c,0x02,0x04,0x00,0xaf,0x86,0x8b,0xb0,0x10,0xa2,0x00,0x03,0x00,0x00,0x00,0x00,
+0x0c,0x00,0x04,0x98,0x00,0x00,0x00,0x00,0x8f,0xbf,0x00,0x30,0x00,0x00,0x00,0x00,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x38,0x93,0x82,0x8b,0xc0,0x00,0x00,0x00,0x00,
+0x10,0x40,0x00,0x11,0x24,0x06,0x00,0x01,0x8f,0x82,0x8b,0xb8,0x3c,0x05,0xb0,0x06,
+0x3c,0x04,0xb0,0x03,0x34,0xa5,0x80,0x18,0x34,0x84,0x01,0x08,0x14,0x40,0x00,0x09,
+0x00,0x00,0x30,0x21,0x97,0x82,0x8b,0xb4,0x8c,0x84,0x00,0x00,0x3c,0x03,0xb0,0x02,
+0x00,0x43,0x10,0x21,0xaf,0x84,0x8b,0xbc,0xa7,0x80,0x8b,0xb6,0xac,0x40,0x00,0x00,
+0xac,0x40,0x00,0x04,0x8c,0xa2,0x00,0x00,0x03,0xe0,0x00,0x08,0x00,0xc0,0x10,0x21,
+0x8f,0x86,0x8b,0xb0,0x8f,0x82,0x8b,0xb8,0x27,0xbd,0xff,0xe8,0xaf,0xbf,0x00,0x10,
+0x00,0xc0,0x40,0x21,0x14,0x40,0x00,0x0a,0x00,0x40,0x50,0x21,0x00,0x00,0x38,0x21,
+0x27,0x89,0x83,0x38,0x24,0xe2,0x00,0x01,0x00,0x07,0x18,0x80,0x30,0x47,0x00,0xff,
+0x00,0x69,0x18,0x21,0x2c,0xe2,0x00,0x0a,0x14,0x40,0xff,0xfa,0xac,0x60,0x00,0x00,
+0x3c,0x02,0x00,0x80,0x10,0x82,0x00,0x6f,0x00,0x00,0x00,0x00,0x97,0x82,0x83,0x3e,
+0x00,0x00,0x00,0x00,0x24,0x42,0x00,0x01,0xa7,0x82,0x83,0x3e,0x90,0xa3,0x00,0x15,
+0x97,0x82,0x83,0x40,0x00,0x03,0x1e,0x00,0x00,0x03,0x1e,0x03,0x00,0x43,0x10,0x21,
+0xa7,0x82,0x83,0x40,0x8c,0xa4,0x00,0x20,0x3c,0x02,0x00,0x60,0x3c,0x03,0x00,0x20,
+0x00,0x82,0x20,0x24,0x10,0x83,0x00,0x54,0x00,0x00,0x00,0x00,0x14,0x80,0x00,0x47,
+0x00,0x00,0x00,0x00,0x97,0x82,0x83,0x44,0x00,0x00,0x00,0x00,0x24,0x42,0x00,0x01,
+0xa7,0x82,0x83,0x44,0x84,0xa3,0x00,0x06,0x8f,0x82,0x83,0x54,0x00,0x00,0x00,0x00,
+0x00,0x43,0x10,0x21,0xaf,0x82,0x83,0x54,0x25,0x42,0x00,0x01,0x28,0x43,0x27,0x10,
+0xaf,0x82,0x8b,0xb8,0x10,0x60,0x00,0x09,0x24,0x02,0x00,0x04,0x93,0x83,0x80,0x11,
+0x24,0x02,0x00,0x01,0x10,0x62,0x00,0x05,0x24,0x02,0x00,0x04,0x8f,0xbf,0x00,0x10,
+0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x18,0x24,0x03,0x00,0x28,
+0xa3,0x83,0x83,0x3a,0xa3,0x82,0x83,0x3b,0x90,0xa2,0x00,0x18,0x93,0x83,0x83,0x63,
+0x00,0x00,0x38,0x21,0x00,0x02,0x16,0x00,0x00,0x02,0x16,0x03,0xa7,0x82,0x83,0x4e,
+0xa3,0x83,0x83,0x5c,0x27,0x89,0x83,0x38,0x24,0x05,0x8f,0xff,0x00,0x07,0x10,0x80,
+0x00,0x49,0x10,0x21,0x8c,0x44,0x00,0x00,0x24,0xe3,0x00,0x01,0x30,0x67,0x00,0xff,
+0x25,0x02,0x00,0x04,0x2c,0xe3,0x00,0x0a,0xad,0x04,0x00,0x00,0x14,0x60,0xff,0xf7,
+0x00,0x45,0x40,0x24,0x97,0x83,0x8b,0xb6,0x97,0x85,0x8b,0xb4,0x3c,0x02,0xb0,0x02,
+0x24,0x63,0x00,0x28,0x00,0xa2,0x28,0x21,0x3c,0x04,0xb0,0x06,0xa7,0x83,0x8b,0xb6,
+0x34,0x84,0x80,0x18,0xa4,0xa3,0x00,0x00,0x8c,0x85,0x00,0x00,0x24,0x02,0x8f,0xff,
+0x24,0xc6,0x00,0x28,0x3c,0x03,0x0f,0x00,0x00,0xc2,0x30,0x24,0x00,0xa3,0x28,0x24,
+0x3c,0x02,0x04,0x00,0xaf,0x86,0x8b,0xb0,0x10,0xa2,0x00,0x03,0x00,0x00,0x00,0x00,
+0x0c,0x00,0x04,0x98,0x00,0x00,0x00,0x00,0x0c,0x00,0x02,0x38,0x00,0x00,0x00,0x00,
+0xa3,0x80,0x80,0x11,0x08,0x00,0x02,0xe7,0x00,0x00,0x00,0x00,0x97,0x82,0x83,0x46,
+0x00,0x00,0x00,0x00,0x24,0x42,0x00,0x01,0xa7,0x82,0x83,0x46,0x84,0xa3,0x00,0x06,
+0x8f,0x82,0x83,0x58,0x00,0x00,0x00,0x00,0x00,0x43,0x10,0x21,0xaf,0x82,0x83,0x58,
+0x08,0x00,0x02,0xdf,0x25,0x42,0x00,0x01,0x97,0x82,0x83,0x42,0x00,0x00,0x00,0x00,
+0x24,0x42,0x00,0x01,0xa7,0x82,0x83,0x42,0x84,0xa3,0x00,0x06,0x8f,0x82,0x83,0x50,
+0x00,0x00,0x00,0x00,0x00,0x43,0x10,0x21,0xaf,0x82,0x83,0x50,0x08,0x00,0x02,0xdf,
+0x25,0x42,0x00,0x01,0x97,0x82,0x83,0x3c,0x00,0x00,0x00,0x00,0x24,0x42,0x00,0x01,
+0xa7,0x82,0x83,0x3c,0x08,0x00,0x02,0xc7,0x00,0x00,0x00,0x00,0x27,0xbd,0xff,0xd0,
+0xaf,0xbf,0x00,0x28,0x8c,0xa3,0x00,0x20,0x8f,0x8a,0x8b,0xb0,0x3c,0x02,0x00,0x10,
+0x00,0x62,0x10,0x24,0x00,0xa0,0x38,0x21,0x01,0x40,0x48,0x21,0x10,0x40,0x00,0x3d,
+0x00,0x80,0x28,0x21,0x8c,0xe4,0x00,0x1c,0x34,0xa5,0x12,0x06,0xaf,0xa5,0x00,0x10,
+0x8c,0x82,0x00,0x08,0x00,0x03,0x1c,0x42,0x30,0x63,0x00,0x30,0x00,0x02,0x13,0x02,
+0x30,0x42,0x00,0x40,0x00,0x43,0x10,0x25,0x90,0xe6,0x00,0x10,0x90,0xe4,0x00,0x13,
+0x94,0xe8,0x00,0x0c,0x94,0xe3,0x00,0x1a,0x00,0x02,0x16,0x00,0x90,0xe7,0x00,0x12,
+0x00,0xa2,0x28,0x25,0x24,0x02,0x12,0x34,0xa7,0xa2,0x00,0x1c,0x24,0x02,0x56,0x78,
+0xaf,0xa5,0x00,0x10,0xa3,0xa6,0x00,0x18,0xa3,0xa7,0x00,0x1f,0xa7,0xa3,0x00,0x1a,
+0xa3,0xa4,0x00,0x19,0xa7,0xa8,0x00,0x20,0xa7,0xa2,0x00,0x22,0x00,0x00,0x28,0x21,
+0x27,0xa7,0x00,0x10,0x24,0x06,0x8f,0xff,0x00,0x05,0x10,0x80,0x00,0x47,0x10,0x21,
+0x8c,0x44,0x00,0x00,0x24,0xa3,0x00,0x01,0x30,0x65,0x00,0xff,0x25,0x22,0x00,0x04,
+0x2c,0xa3,0x00,0x05,0xad,0x24,0x00,0x00,0x14,0x60,0xff,0xf7,0x00,0x46,0x48,0x24,
+0x97,0x83,0x8b,0xb6,0x97,0x85,0x8b,0xb4,0x3c,0x02,0xb0,0x02,0x24,0x63,0x00,0x14,
+0x00,0xa2,0x28,0x21,0x3c,0x04,0xb0,0x06,0xa7,0x83,0x8b,0xb6,0x34,0x84,0x80,0x18,
+0xa4,0xa3,0x00,0x00,0x8c,0x85,0x00,0x00,0x24,0x02,0x8f,0xff,0x25,0x46,0x00,0x14,
+0x3c,0x03,0x0f,0x00,0x00,0xc2,0x50,0x24,0x00,0xa3,0x28,0x24,0x3c,0x02,0x04,0x00,
+0xaf,0x8a,0x8b,0xb0,0x10,0xa2,0x00,0x03,0x00,0x00,0x00,0x00,0x0c,0x00,0x04,0x98,
+0x00,0x00,0x00,0x00,0x8f,0xbf,0x00,0x28,0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x30,0x3c,0x05,0xb0,0x03,0x3c,0x02,0x80,0x00,0x27,0xbd,0xff,0xc8,
+0x00,0x04,0x22,0x00,0x34,0xa5,0x00,0x20,0x24,0x42,0x0e,0x04,0x3c,0x03,0xb0,0x00,
+0xaf,0xb5,0x00,0x24,0xaf,0xb4,0x00,0x20,0xaf,0xb2,0x00,0x18,0xaf,0xb0,0x00,0x10,
+0xaf,0xbf,0x00,0x30,0x00,0x83,0x80,0x21,0xaf,0xb7,0x00,0x2c,0xaf,0xb6,0x00,0x28,
+0xaf,0xb3,0x00,0x1c,0xaf,0xb1,0x00,0x14,0xac,0xa2,0x00,0x00,0x8e,0x09,0x00,0x00,
+0x00,0x00,0x90,0x21,0x26,0x10,0x00,0x08,0x00,0x09,0xa6,0x02,0x12,0x80,0x00,0x13,
+0x00,0x00,0xa8,0x21,0x24,0x13,0x00,0x02,0x3c,0x16,0x00,0xff,0x3c,0x17,0xff,0x00,
+0x8e,0x09,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x09,0x12,0x02,0x24,0x42,0x00,0x02,
+0x31,0x25,0x00,0xff,0x10,0xb3,0x00,0x76,0x30,0x51,0x00,0xff,0x24,0x02,0x00,0x03,
+0x10,0xa2,0x00,0x18,0x00,0x00,0x00,0x00,0x02,0x51,0x10,0x21,0x30,0x52,0xff,0xff,
+0x02,0x54,0x18,0x2b,0x14,0x60,0xff,0xf2,0x02,0x11,0x80,0x21,0x12,0xa0,0x00,0x0a,
+0x3c,0x02,0xb0,0x06,0x34,0x42,0x80,0x18,0x8c,0x43,0x00,0x00,0x3c,0x04,0x0f,0x00,
+0x3c,0x02,0x04,0x00,0x00,0x64,0x18,0x24,0x10,0x62,0x00,0x03,0x00,0x00,0x00,0x00,
+0x0c,0x00,0x04,0x98,0x00,0x00,0x00,0x00,0x8f,0xbf,0x00,0x30,0x7b,0xb6,0x01,0x7c,
+0x7b,0xb4,0x01,0x3c,0x7b,0xb2,0x00,0xfc,0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x38,0x8e,0x09,0x00,0x04,0x24,0x15,0x00,0x01,0x8e,0x06,0x00,0x0c,
+0x00,0x09,0x11,0x42,0x00,0x09,0x18,0xc2,0x30,0x48,0x00,0x03,0x00,0x09,0x14,0x02,
+0x30,0x6c,0x00,0x03,0x00,0x09,0x26,0x02,0x11,0x15,0x00,0x45,0x30,0x43,0x00,0x0f,
+0x29,0x02,0x00,0x02,0x14,0x40,0x00,0x26,0x00,0x00,0x00,0x00,0x11,0x13,0x00,0x0f,
+0x00,0x00,0x38,0x21,0x00,0x07,0x22,0x02,0x30,0x84,0xff,0x00,0x3c,0x03,0x00,0xff,
+0x00,0x07,0x2e,0x02,0x00,0x07,0x12,0x00,0x00,0x43,0x10,0x24,0x00,0xa4,0x28,0x25,
+0x00,0xa2,0x28,0x25,0x00,0x07,0x1e,0x00,0x00,0xa3,0x28,0x25,0x0c,0x00,0x01,0x94,
+0x01,0x20,0x20,0x21,0x08,0x00,0x03,0xa7,0x02,0x51,0x10,0x21,0x11,0x95,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x11,0x88,0x00,0x07,0x00,0x00,0x00,0x00,0x00,0x04,0x10,0x80,
+0x27,0x83,0x8b,0x60,0x00,0x43,0x10,0x21,0x8c,0x47,0x00,0x18,0x08,0x00,0x03,0xce,
+0x00,0x07,0x22,0x02,0x00,0x04,0x10,0x40,0x27,0x83,0x8b,0x68,0x00,0x43,0x10,0x21,
+0x94,0x47,0x00,0x02,0x08,0x00,0x03,0xce,0x00,0x07,0x22,0x02,0x27,0x82,0x8b,0x60,
+0x00,0x82,0x10,0x21,0x90,0x47,0x00,0x00,0x08,0x00,0x03,0xce,0x00,0x07,0x22,0x02,
+0x15,0x00,0xff,0xdc,0x00,0x00,0x38,0x21,0x10,0x75,0x00,0x05,0x00,0x80,0x38,0x21,
+0x00,0x65,0x18,0x26,0x24,0x82,0x01,0x00,0x00,0x00,0x38,0x21,0x00,0x43,0x38,0x0a,
+0x24,0x02,0x00,0x01,0x11,0x82,0x00,0x0e,0x3c,0x02,0xb0,0x03,0x24,0x02,0x00,0x02,
+0x11,0x82,0x00,0x06,0x00,0x00,0x00,0x00,0x3c,0x02,0xb0,0x03,0x00,0xe2,0x10,0x21,
+0x8c,0x47,0x00,0x00,0x08,0x00,0x03,0xce,0x00,0x07,0x22,0x02,0x3c,0x02,0xb0,0x03,
+0x00,0xe2,0x10,0x21,0x94,0x43,0x00,0x00,0x08,0x00,0x03,0xcd,0x30,0x67,0xff,0xff,
+0x00,0xe2,0x10,0x21,0x90,0x43,0x00,0x00,0x08,0x00,0x03,0xcd,0x30,0x67,0x00,0xff,
+0x30,0x62,0x00,0x03,0x00,0x02,0x12,0x00,0x11,0x95,0x00,0x07,0x00,0x44,0x38,0x21,
+0x11,0x93,0x00,0x03,0x00,0x00,0x00,0x00,0x08,0x00,0x03,0xff,0x3c,0x02,0xb0,0x0a,
+0x08,0x00,0x04,0x04,0x3c,0x02,0xb0,0x0a,0x08,0x00,0x04,0x08,0x3c,0x02,0xb0,0x0a,
+0x8e,0x09,0x00,0x04,0x8e,0x02,0x00,0x08,0x8e,0x03,0x00,0x0c,0x00,0x09,0x41,0x42,
+0x00,0x02,0x22,0x02,0x00,0x03,0x3a,0x02,0x30,0x84,0xff,0x00,0x30,0xe7,0xff,0x00,
+0x00,0x02,0x5e,0x02,0x00,0x02,0x32,0x00,0x00,0x03,0x56,0x02,0x00,0x03,0x2a,0x00,
+0x01,0x64,0x58,0x25,0x00,0xd6,0x30,0x24,0x01,0x47,0x50,0x25,0x00,0x02,0x16,0x00,
+0x00,0xb6,0x28,0x24,0x00,0x03,0x1e,0x00,0x01,0x66,0x58,0x25,0x01,0x45,0x50,0x25,
+0x00,0x57,0x10,0x24,0x00,0x77,0x18,0x24,0x01,0x62,0x38,0x25,0x01,0x43,0x30,0x25,
+0x00,0x09,0x10,0xc2,0x00,0x09,0x1c,0x02,0x31,0x08,0x00,0x03,0x30,0x4c,0x00,0x03,
+0x30,0x63,0x00,0x0f,0x00,0x09,0x26,0x02,0x00,0xe0,0x58,0x21,0x15,0x00,0x00,0x28,
+0x00,0xc0,0x50,0x21,0x24,0x02,0x00,0x01,0x10,0x62,0x00,0x06,0x00,0x80,0x28,0x21,
+0x24,0x02,0x00,0x03,0x14,0x62,0xff,0x69,0x02,0x51,0x10,0x21,0x24,0x85,0x01,0x00,
+0x24,0x02,0x00,0x01,0x11,0x82,0x00,0x15,0x24,0x02,0x00,0x02,0x11,0x82,0x00,0x0a,
+0x3c,0x03,0xb0,0x03,0x00,0xa3,0x18,0x21,0x8c,0x62,0x00,0x00,0x00,0x0a,0x20,0x27,
+0x01,0x6a,0x28,0x24,0x00,0x44,0x10,0x24,0x00,0x45,0x10,0x25,0xac,0x62,0x00,0x00,
+0x08,0x00,0x03,0xa7,0x02,0x51,0x10,0x21,0x00,0xa3,0x18,0x21,0x94,0x62,0x00,0x00,
+0x00,0x0a,0x20,0x27,0x01,0x6a,0x28,0x24,0x00,0x44,0x10,0x24,0x00,0x45,0x10,0x25,
+0xa4,0x62,0x00,0x00,0x08,0x00,0x03,0xa7,0x02,0x51,0x10,0x21,0x3c,0x03,0xb0,0x03,
+0x00,0xa3,0x18,0x21,0x90,0x62,0x00,0x00,0x00,0x0a,0x20,0x27,0x01,0x6a,0x28,0x24,
+0x00,0x44,0x10,0x24,0x00,0x45,0x10,0x25,0x08,0x00,0x03,0xa6,0xa0,0x62,0x00,0x00,
+0x24,0x02,0x00,0x01,0x11,0x02,0x00,0x21,0x00,0x00,0x00,0x00,0x15,0x13,0xff,0x42,
+0x00,0x00,0x00,0x00,0x11,0x82,0x00,0x17,0x00,0x00,0x00,0x00,0x11,0x88,0x00,0x0b,
+0x00,0x00,0x00,0x00,0x27,0x83,0x8b,0x60,0x00,0x04,0x20,0x80,0x00,0x83,0x20,0x21,
+0x8c,0x82,0x00,0x18,0x00,0x06,0x18,0x27,0x00,0xe6,0x28,0x24,0x00,0x43,0x10,0x24,
+0x00,0x45,0x10,0x25,0x08,0x00,0x03,0xa6,0xac,0x82,0x00,0x18,0x27,0x83,0x8b,0x68,
+0x00,0x04,0x20,0x40,0x00,0x83,0x20,0x21,0x94,0x82,0x00,0x02,0x00,0x06,0x18,0x27,
+0x00,0xe6,0x28,0x24,0x00,0x43,0x10,0x24,0x00,0x45,0x10,0x25,0x08,0x00,0x03,0xa6,
+0xa4,0x82,0x00,0x02,0x27,0x83,0x8b,0x60,0x00,0x83,0x18,0x21,0x90,0x62,0x00,0x00,
+0x00,0x06,0x20,0x27,0x08,0x00,0x04,0x5c,0x00,0xe6,0x28,0x24,0x30,0x62,0x00,0x07,
+0x00,0x02,0x12,0x00,0x11,0x88,0x00,0x0f,0x00,0x44,0x10,0x21,0x11,0x93,0x00,0x07,
+0x00,0x00,0x00,0x00,0x3c,0x03,0xb0,0x0a,0x00,0x43,0x18,0x21,0x8c,0x62,0x00,0x00,
+0x00,0x06,0x20,0x27,0x08,0x00,0x04,0x49,0x00,0xe6,0x28,0x24,0x3c,0x03,0xb0,0x0a,
+0x00,0x43,0x18,0x21,0x94,0x62,0x00,0x00,0x00,0x06,0x20,0x27,0x08,0x00,0x04,0x52,
+0x00,0xe6,0x28,0x24,0x3c,0x03,0xb0,0x0a,0x08,0x00,0x04,0x7f,0x00,0x43,0x18,0x21,
+0x97,0x85,0x8b,0xb4,0x3c,0x07,0xb0,0x02,0x3c,0x04,0xb0,0x03,0x3c,0x02,0x80,0x00,
+0x00,0xa7,0x28,0x21,0x34,0x84,0x00,0x20,0x24,0x42,0x12,0x60,0x24,0x03,0xff,0x80,
+0xac,0x82,0x00,0x00,0xa0,0xa3,0x00,0x07,0x97,0x82,0x8b,0xb6,0x97,0x85,0x8b,0xb4,
+0x3c,0x06,0xb0,0x06,0x30,0x42,0xff,0xf8,0x24,0x42,0x00,0x10,0x00,0xa2,0x10,0x21,
+0x30,0x42,0x0f,0xff,0x24,0x44,0x00,0x08,0x30,0x84,0x0f,0xff,0x00,0x05,0x28,0xc2,
+0x3c,0x03,0x00,0x40,0x00,0xa3,0x28,0x25,0x00,0x87,0x20,0x21,0x34,0xc6,0x80,0x18,
+0xac,0xc5,0x00,0x00,0xaf,0x84,0x8b,0xb0,0xa7,0x82,0x8b,0xb4,0xa7,0x80,0x8b,0xb6,
+0xaf,0x80,0x8b,0xb8,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x30,0xa5,0x00,0xff,
+0x30,0x84,0x00,0xff,0x24,0x02,0x00,0x01,0x00,0xe0,0x48,0x21,0x30,0xc6,0x00,0xff,
+0x8f,0xa7,0x00,0x10,0x10,0x82,0x00,0x07,0x00,0xa0,0x40,0x21,0x24,0x02,0x00,0x03,
+0x10,0x82,0x00,0x03,0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,
+0x24,0xa8,0x01,0x00,0x3c,0x03,0xb0,0x03,0x24,0x02,0x00,0x01,0x00,0x07,0x20,0x27,
+0x01,0x27,0x28,0x24,0x10,0xc2,0x00,0x14,0x01,0x03,0x18,0x21,0x24,0x02,0x00,0x02,
+0x10,0xc2,0x00,0x09,0x00,0x07,0x50,0x27,0x3c,0x03,0xb0,0x03,0x01,0x03,0x18,0x21,
+0x8c,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x4a,0x10,0x24,0x00,0x45,0x10,0x25,
+0x08,0x00,0x04,0xe3,0xac,0x62,0x00,0x00,0x3c,0x03,0xb0,0x03,0x01,0x03,0x18,0x21,
+0x94,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x4a,0x10,0x24,0x00,0x45,0x10,0x25,
+0x03,0xe0,0x00,0x08,0xa4,0x62,0x00,0x00,0x90,0x62,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x44,0x10,0x24,0x00,0x45,0x10,0x25,0xa0,0x62,0x00,0x00,0x03,0xe0,0x00,0x08,
+0x00,0x00,0x00,0x00,0x30,0x84,0x00,0x07,0x00,0x04,0x22,0x00,0x30,0xa5,0x00,0xff,
+0x00,0x85,0x28,0x21,0x3c,0x02,0xb0,0x0a,0x00,0xa2,0x40,0x21,0x30,0xc6,0x00,0xff,
+0x24,0x02,0x00,0x01,0x8f,0xa4,0x00,0x10,0x10,0xc2,0x00,0x14,0x24,0x02,0x00,0x02,
+0x00,0x04,0x50,0x27,0x10,0xc2,0x00,0x09,0x00,0xe4,0x48,0x24,0x3c,0x03,0xb0,0x0a,
+0x00,0xa3,0x18,0x21,0x8c,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x4a,0x10,0x24,
+0x00,0x49,0x10,0x25,0x03,0xe0,0x00,0x08,0xac,0x62,0x00,0x00,0x3c,0x03,0xb0,0x0a,
+0x00,0xa3,0x18,0x21,0x94,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x4a,0x10,0x24,
+0x00,0x49,0x10,0x25,0x03,0xe0,0x00,0x08,0xa4,0x62,0x00,0x00,0x91,0x02,0x00,0x00,
+0x00,0x04,0x18,0x27,0x00,0xe4,0x20,0x24,0x00,0x43,0x10,0x24,0x00,0x44,0x10,0x25,
+0x03,0xe0,0x00,0x08,0xa1,0x02,0x00,0x00,0x30,0xa9,0x00,0xff,0x27,0x83,0x8b,0x60,
+0x30,0x85,0x00,0xff,0x24,0x02,0x00,0x01,0x00,0x07,0x50,0x27,0x00,0xc7,0x40,0x24,
+0x11,0x22,0x00,0x17,0x00,0xa3,0x18,0x21,0x00,0x05,0x20,0x40,0x27,0x82,0x8b,0x60,
+0x00,0x05,0x28,0x80,0x27,0x83,0x8b,0x68,0x00,0x83,0x50,0x21,0x00,0xa2,0x20,0x21,
+0x24,0x02,0x00,0x02,0x00,0x07,0x40,0x27,0x11,0x22,0x00,0x07,0x00,0xc7,0x28,0x24,
+0x8c,0x82,0x00,0x18,0x00,0x00,0x00,0x00,0x00,0x48,0x10,0x24,0x00,0x45,0x10,0x25,
+0x03,0xe0,0x00,0x08,0xac,0x82,0x00,0x18,0x95,0x42,0x00,0x02,0x00,0x00,0x00,0x00,
+0x00,0x48,0x10,0x24,0x00,0x45,0x10,0x25,0x03,0xe0,0x00,0x08,0xa5,0x42,0x00,0x02,
+0x90,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x4a,0x10,0x24,0x00,0x48,0x10,0x25,
+0x03,0xe0,0x00,0x08,0xa0,0x62,0x00,0x00,0x00,0x04,0x32,0x02,0x30,0xc6,0xff,0x00,
+0x00,0x04,0x16,0x02,0x00,0x04,0x1a,0x00,0x3c,0x05,0x00,0xff,0x00,0x65,0x18,0x24,
+0x00,0x46,0x10,0x25,0x00,0x43,0x10,0x25,0x00,0x04,0x26,0x00,0x03,0xe0,0x00,0x08,
+0x00,0x44,0x10,0x25,0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,0x27,0xbd,0xff,0xe8,
+0x34,0x63,0x00,0x20,0x24,0x42,0x14,0xe4,0x3c,0x04,0xb0,0x03,0xaf,0xbf,0x00,0x14,
+0xac,0x62,0x00,0x00,0xaf,0xb0,0x00,0x10,0x34,0x84,0x00,0x2c,0x8c,0x83,0x00,0x00,
+0xa7,0x80,0xbb,0xf0,0x00,0x03,0x12,0x02,0x00,0x03,0x2d,0x02,0x30,0x42,0x0f,0xff,
+0xa3,0x83,0xbb,0xf8,0xa7,0x85,0xbb,0xfc,0xa7,0x82,0xbb,0xfa,0xa7,0x80,0xbb,0xf2,
+0xa7,0x80,0xbb,0xf4,0xa7,0x80,0xbb,0xf6,0x0c,0x00,0x06,0xce,0x24,0x04,0x05,0x00,
+0x3c,0x05,0x08,0x00,0x00,0x45,0x28,0x25,0x24,0x04,0x05,0x00,0x0c,0x00,0x06,0xc1,
+0x00,0x40,0x80,0x21,0x3c,0x02,0xf7,0xff,0x34,0x42,0xff,0xff,0x02,0x02,0x80,0x24,
+0x02,0x00,0x28,0x21,0x0c,0x00,0x06,0xc1,0x24,0x04,0x05,0x00,0x3c,0x02,0xb0,0x03,
+0x3c,0x03,0xb0,0x03,0x34,0x42,0x01,0x08,0x34,0x63,0x01,0x18,0x8c,0x45,0x00,0x00,
+0x8c,0x64,0x00,0x00,0x3c,0x02,0x00,0x0f,0x3c,0x03,0x00,0x4c,0x30,0x84,0x02,0x00,
+0x34,0x63,0x4b,0x40,0xaf,0x85,0xbc,0x00,0x10,0x80,0x00,0x06,0x34,0x42,0x42,0x40,
+0xaf,0x83,0xbc,0x04,0x8f,0xbf,0x00,0x14,0x8f,0xb0,0x00,0x10,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x18,0xaf,0x82,0xbc,0x04,0x08,0x00,0x05,0x69,0x00,0x00,0x00,0x00,
+0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,0x27,0xbd,0xff,0xc8,0x34,0x63,0x00,0x20,
+0x24,0x42,0x15,0xc0,0x30,0x84,0x00,0xff,0xaf,0xbf,0x00,0x30,0xaf,0xb7,0x00,0x2c,
+0xaf,0xb6,0x00,0x28,0xaf,0xb5,0x00,0x24,0xaf,0xb4,0x00,0x20,0xaf,0xb3,0x00,0x1c,
+0xaf,0xb2,0x00,0x18,0xaf,0xb1,0x00,0x14,0xaf,0xb0,0x00,0x10,0xac,0x62,0x00,0x00,
+0x10,0x80,0x00,0x1c,0x24,0x02,0x00,0x02,0x10,0x82,0x00,0x08,0x00,0x00,0x00,0x00,
+0x8f,0xbf,0x00,0x30,0x7b,0xb6,0x01,0x7c,0x7b,0xb4,0x01,0x3c,0x7b,0xb2,0x00,0xfc,
+0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x38,0xa7,0x80,0xbb,0xf0,
+0xa7,0x80,0xbb,0xf2,0xa7,0x80,0xbb,0xf4,0xa7,0x80,0xbb,0xf6,0x0c,0x00,0x06,0xce,
+0x24,0x04,0x05,0x00,0x3c,0x05,0x08,0x00,0x00,0x45,0x28,0x25,0x24,0x04,0x05,0x00,
+0x0c,0x00,0x06,0xc1,0x00,0x40,0x80,0x21,0x3c,0x05,0xf7,0xff,0x34,0xa5,0xff,0xff,
+0x02,0x05,0x28,0x24,0x0c,0x00,0x06,0xc1,0x24,0x04,0x05,0x00,0x08,0x00,0x05,0x84,
+0x00,0x00,0x00,0x00,0x0c,0x00,0x06,0xce,0x24,0x04,0x05,0xa0,0x24,0x04,0x05,0xa4,
+0x0c,0x00,0x06,0xce,0x00,0x02,0xbc,0x02,0x24,0x04,0x05,0xa8,0x00,0x02,0xb4,0x02,
+0x0c,0x00,0x06,0xce,0x30,0x55,0xff,0xff,0x00,0x40,0x80,0x21,0x97,0x84,0xbb,0xf0,
+0x97,0x82,0xbb,0xf2,0x97,0x83,0xbb,0xf6,0x02,0xe4,0x20,0x23,0x02,0xa2,0x10,0x23,
+0x00,0x82,0x20,0x21,0x97,0x82,0xbb,0xf4,0x32,0x14,0xff,0xff,0x02,0x83,0x18,0x23,
+0x02,0xc2,0x10,0x23,0x00,0x82,0x20,0x21,0x93,0x82,0xbb,0xf8,0x00,0x83,0x20,0x21,
+0x30,0x84,0xff,0xff,0x00,0x82,0x10,0x2b,0x14,0x40,0x00,0xaa,0x00,0x00,0x00,0x00,
+0x97,0x82,0xbb,0xfc,0x00,0x00,0x00,0x00,0x00,0x44,0x10,0x2b,0x14,0x40,0x00,0x7f,
+0x00,0x00,0x00,0x00,0x97,0x82,0xbb,0xfa,0x00,0x00,0x00,0x00,0x00,0x44,0x10,0x2b,
+0x10,0x40,0x00,0x3a,0x00,0x00,0x00,0x00,0x0c,0x00,0x06,0xce,0x24,0x04,0x04,0x50,
+0x30,0x51,0x00,0x7f,0x00,0x40,0x80,0x21,0x2e,0x22,0x00,0x32,0x10,0x40,0x00,0x13,
+0x24,0x02,0x00,0x20,0x12,0x22,0x00,0x17,0x24,0x02,0xff,0x80,0x02,0x02,0x10,0x24,
+0x26,0x31,0x00,0x01,0x00,0x51,0x80,0x25,0x02,0x00,0x28,0x21,0x0c,0x00,0x06,0xc1,
+0x24,0x04,0x04,0x50,0x02,0x00,0x28,0x21,0x0c,0x00,0x06,0xc1,0x24,0x04,0x04,0x58,
+0x02,0x00,0x28,0x21,0x0c,0x00,0x06,0xc1,0x24,0x04,0x04,0x60,0x02,0x00,0x28,0x21,
+0x24,0x04,0x04,0x68,0x0c,0x00,0x06,0xc1,0x00,0x00,0x00,0x00,0xa7,0x97,0xbb,0xf0,
+0xa7,0x95,0xbb,0xf2,0xa7,0x96,0xbb,0xf4,0xa7,0x94,0xbb,0xf6,0x08,0x00,0x05,0x84,
+0x00,0x00,0x00,0x00,0x0c,0x00,0x06,0xce,0x24,0x04,0x02,0x08,0x3c,0x04,0x00,0xc0,
+0x00,0x40,0x28,0x21,0x00,0x44,0x10,0x24,0x00,0x02,0x15,0x82,0x24,0x03,0x00,0x03,
+0x10,0x43,0x00,0x07,0x00,0x00,0x00,0x00,0x3c,0x02,0xff,0x3f,0x34,0x42,0xff,0xff,
+0x00,0xa2,0x10,0x24,0x00,0x44,0x28,0x25,0x0c,0x00,0x06,0xc1,0x24,0x04,0x02,0x08,
+0x0c,0x00,0x06,0xce,0x24,0x04,0x02,0x2c,0x00,0x40,0x90,0x21,0x3c,0x02,0xff,0xff,
+0x34,0x42,0x3f,0xff,0x02,0x42,0x90,0x24,0x02,0x40,0x28,0x21,0x0c,0x00,0x06,0xc1,
+0x24,0x04,0x02,0x2c,0x08,0x00,0x05,0xcb,0x24,0x02,0xff,0x80,0x0c,0x00,0x06,0xce,
+0x24,0x04,0x04,0x50,0x30,0x51,0x00,0x7f,0x24,0x02,0x00,0x20,0x16,0x22,0xff,0xdb,
+0x00,0x00,0x00,0x00,0x0c,0x00,0x06,0xce,0x24,0x04,0x02,0x2c,0x34,0x52,0x40,0x00,
+0x02,0x40,0x28,0x21,0x0c,0x00,0x06,0xc1,0x24,0x04,0x02,0x2c,0x0c,0x00,0x06,0xce,
+0x24,0x04,0x02,0x58,0x24,0x04,0x02,0x5c,0x0c,0x00,0x06,0xce,0x00,0x02,0x9e,0x02,
+0x30,0x43,0x00,0xff,0x00,0x13,0x12,0x00,0x00,0x43,0x10,0x25,0x2c,0x43,0x00,0x04,
+0x14,0x60,0x00,0x1d,0x2c,0x42,0x00,0x11,0x10,0x40,0x00,0x0b,0x00,0x00,0x00,0x00,
+0x3c,0x02,0xff,0xff,0x34,0x42,0x3f,0xff,0x02,0x42,0x90,0x24,0x02,0x40,0x28,0x21,
+0x24,0x04,0x02,0x2c,0x0c,0x00,0x06,0xc1,0x36,0x52,0x80,0x00,0x02,0x40,0x28,0x21,
+0x08,0x00,0x05,0xd9,0x24,0x04,0x02,0x2c,0x0c,0x00,0x06,0xce,0x24,0x04,0x02,0x08,
+0x3c,0x04,0x00,0xc0,0x00,0x40,0x28,0x21,0x00,0x44,0x10,0x24,0x00,0x02,0x15,0x82,
+0x24,0x03,0x00,0x02,0x14,0x43,0xff,0xee,0x3c,0x02,0xff,0x3f,0x34,0x42,0xff,0xff,
+0x00,0xa2,0x10,0x24,0x00,0x44,0x28,0x25,0x0c,0x00,0x06,0xc1,0x24,0x04,0x02,0x08,
+0x08,0x00,0x06,0x15,0x3c,0x02,0xff,0xff,0x0c,0x00,0x06,0xce,0x24,0x04,0x02,0x08,
+0x00,0x40,0x28,0x21,0x00,0x02,0x15,0x82,0x30,0x42,0x00,0x03,0x24,0x03,0x00,0x03,
+0x14,0x43,0xff,0xdf,0x3c,0x02,0xff,0x3f,0x34,0x42,0xff,0xff,0x00,0xa2,0x10,0x24,
+0x3c,0x03,0x00,0x80,0x08,0x00,0x06,0x2a,0x00,0x43,0x28,0x25,0x0c,0x00,0x06,0xce,
+0x24,0x04,0x04,0x50,0x30,0x51,0x00,0x7f,0x00,0x40,0x80,0x21,0x2e,0x22,0x00,0x32,
+0x10,0x40,0xff,0x9a,0x24,0x02,0x00,0x20,0x12,0x22,0x00,0x04,0x24,0x02,0xff,0x80,
+0x02,0x02,0x10,0x24,0x08,0x00,0x05,0xcd,0x26,0x31,0x00,0x02,0x0c,0x00,0x06,0xce,
+0x24,0x04,0x02,0x08,0x3c,0x04,0x00,0xc0,0x00,0x40,0x28,0x21,0x00,0x44,0x10,0x24,
+0x00,0x02,0x15,0x82,0x24,0x03,0x00,0x03,0x10,0x43,0x00,0x07,0x00,0x00,0x00,0x00,
+0x3c,0x02,0xff,0x3f,0x34,0x42,0xff,0xff,0x00,0xa2,0x10,0x24,0x00,0x44,0x28,0x25,
+0x0c,0x00,0x06,0xc1,0x24,0x04,0x02,0x08,0x0c,0x00,0x06,0xce,0x24,0x04,0x02,0x2c,
+0x00,0x40,0x90,0x21,0x3c,0x02,0xff,0xff,0x34,0x42,0x3f,0xff,0x02,0x42,0x90,0x24,
+0x02,0x40,0x28,0x21,0x0c,0x00,0x06,0xc1,0x24,0x04,0x02,0x2c,0x08,0x00,0x06,0x44,
+0x24,0x02,0xff,0x80,0x0c,0x00,0x06,0xce,0x24,0x04,0x04,0x50,0x00,0x40,0x80,0x21,
+0x30,0x51,0x00,0x7f,0x24,0x02,0x00,0x20,0x12,0x22,0x00,0x1d,0x2e,0x22,0x00,0x21,
+0x14,0x40,0xff,0x72,0x24,0x02,0xff,0x80,0x02,0x02,0x10,0x24,0x26,0x31,0xff,0xff,
+0x00,0x51,0x80,0x25,0x24,0x04,0x04,0x50,0x0c,0x00,0x06,0xc1,0x02,0x00,0x28,0x21,
+0x24,0x04,0x04,0x58,0x0c,0x00,0x06,0xc1,0x02,0x00,0x28,0x21,0x24,0x04,0x04,0x60,
+0x0c,0x00,0x06,0xc1,0x02,0x00,0x28,0x21,0x02,0x00,0x28,0x21,0x0c,0x00,0x06,0xc1,
+0x24,0x04,0x04,0x68,0x24,0x02,0x00,0x20,0x16,0x22,0xff,0x60,0x00,0x00,0x00,0x00,
+0x0c,0x00,0x06,0xce,0x24,0x04,0x02,0x2c,0x00,0x40,0x90,0x21,0x3c,0x02,0xff,0xff,
+0x34,0x42,0x3f,0xff,0x02,0x42,0x10,0x24,0x08,0x00,0x06,0x1b,0x34,0x52,0x80,0x00,
+0x0c,0x00,0x06,0xce,0x24,0x04,0x02,0x2c,0x34,0x52,0x40,0x00,0x02,0x40,0x28,0x21,
+0x0c,0x00,0x06,0xc1,0x24,0x04,0x02,0x2c,0x0c,0x00,0x06,0xce,0x24,0x04,0x02,0x58,
+0x24,0x04,0x02,0x5c,0x0c,0x00,0x06,0xce,0x00,0x02,0x9e,0x02,0x30,0x43,0x00,0xff,
+0x00,0x13,0x12,0x00,0x00,0x43,0x10,0x25,0x2c,0x43,0x00,0x04,0x14,0x60,0x00,0x20,
+0x2c,0x42,0x00,0x11,0x10,0x40,0x00,0x0d,0x00,0x00,0x00,0x00,0x3c,0x02,0xff,0xff,
+0x34,0x42,0x3f,0xff,0x02,0x42,0x90,0x24,0x02,0x40,0x28,0x21,0x24,0x04,0x02,0x2c,
+0x0c,0x00,0x06,0xc1,0x36,0x52,0x80,0x00,0x02,0x40,0x28,0x21,0x0c,0x00,0x06,0xc1,
+0x24,0x04,0x02,0x2c,0x08,0x00,0x06,0x68,0x2e,0x22,0x00,0x21,0x0c,0x00,0x06,0xce,
+0x24,0x04,0x02,0x08,0x3c,0x04,0x00,0xc0,0x00,0x40,0x28,0x21,0x00,0x44,0x10,0x24,
+0x00,0x02,0x15,0x82,0x24,0x03,0x00,0x02,0x14,0x43,0xff,0xec,0x00,0x00,0x00,0x00,
+0x3c,0x02,0xff,0x3f,0x34,0x42,0xff,0xff,0x00,0xa2,0x10,0x24,0x00,0x44,0x28,0x25,
+0x0c,0x00,0x06,0xc1,0x24,0x04,0x02,0x08,0x08,0x00,0x06,0x98,0x3c,0x02,0xff,0xff,
+0x0c,0x00,0x06,0xce,0x24,0x04,0x02,0x08,0x00,0x40,0x28,0x21,0x00,0x02,0x15,0x82,
+0x30,0x42,0x00,0x03,0x24,0x03,0x00,0x03,0x14,0x43,0xff,0xdc,0x3c,0x03,0x00,0x80,
+0x3c,0x02,0xff,0x3f,0x34,0x42,0xff,0xff,0x00,0xa2,0x10,0x24,0x08,0x00,0x06,0xb0,
+0x00,0x43,0x28,0x25,0x30,0x83,0x00,0x03,0x00,0x04,0x20,0x40,0x00,0x83,0x20,0x23,
+0x3c,0x02,0xb0,0x0a,0x00,0x82,0x20,0x21,0xac,0x85,0x00,0x00,0x00,0x00,0x18,0x21,
+0x24,0x63,0x00,0x01,0x2c,0x62,0x00,0x0a,0x14,0x40,0xff,0xfe,0x24,0x63,0x00,0x01,
+0x03,0xe0,0x00,0x08,0x24,0x63,0xff,0xff,0x30,0x86,0x00,0x03,0x00,0x04,0x28,0x40,
+0x3c,0x03,0xb0,0x0a,0x00,0xa6,0x10,0x23,0x00,0x43,0x10,0x21,0x24,0x04,0xff,0xff,
+0xac,0x44,0x10,0x00,0x00,0x00,0x18,0x21,0x24,0x63,0x00,0x01,0x2c,0x62,0x00,0x0a,
+0x14,0x40,0xff,0xfe,0x24,0x63,0x00,0x01,0x24,0x63,0xff,0xff,0x00,0xa6,0x18,0x23,
+0x3c,0x02,0xb0,0x0a,0x00,0x62,0x18,0x21,0x8c,0x62,0x00,0x00,0x03,0xe0,0x00,0x08,
+0x00,0x00,0x00,0x00,0x3c,0x05,0xb0,0x03,0x3c,0x02,0x80,0x00,0x24,0x42,0x1b,0x84,
+0x24,0x03,0x00,0x01,0x34,0xa5,0x00,0x20,0x3c,0x06,0xb0,0x03,0xac,0xa2,0x00,0x00,
+0x34,0xc6,0x01,0x04,0xa0,0x83,0x00,0x48,0xa0,0x80,0x00,0x04,0xa0,0x80,0x00,0x05,
+0xa0,0x80,0x00,0x06,0xa0,0x80,0x00,0x07,0xa0,0x80,0x00,0x08,0xa0,0x80,0x00,0x09,
+0xa0,0x80,0x00,0x0a,0xa0,0x80,0x00,0x11,0xa0,0x80,0x00,0x13,0xa0,0x80,0x00,0x49,
+0x94,0xc2,0x00,0x00,0xac,0x80,0x00,0x00,0xa0,0x80,0x00,0x4e,0x00,0x02,0x14,0x00,
+0x00,0x02,0x14,0x03,0x30,0x43,0x00,0xff,0x30,0x42,0xff,0x00,0xa4,0x82,0x00,0x44,
+0xa4,0x83,0x00,0x46,0xac,0x80,0x00,0x24,0xac,0x80,0x00,0x28,0xac,0x80,0x00,0x2c,
+0xac,0x80,0x00,0x30,0xac,0x80,0x00,0x34,0xac,0x80,0x00,0x38,0xac,0x80,0x00,0x3c,
+0x03,0xe0,0x00,0x08,0xac,0x80,0x00,0x40,0x84,0x83,0x00,0x0c,0x3c,0x07,0xb0,0x03,
+0x34,0xe7,0x00,0x20,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x80,
+0x27,0x83,0x8f,0xf4,0x00,0x43,0x10,0x21,0x8c,0x48,0x00,0x18,0x3c,0x02,0x80,0x00,
+0x24,0x42,0x1c,0x18,0xac,0xe2,0x00,0x00,0x8d,0x03,0x00,0x08,0x80,0x82,0x00,0x13,
+0x00,0x05,0x2c,0x00,0x00,0x03,0x1e,0x02,0x00,0x02,0x12,0x00,0x30,0x63,0x00,0x7e,
+0x00,0x62,0x18,0x21,0x00,0x65,0x18,0x21,0x3c,0x02,0xc0,0x00,0x3c,0x05,0xb0,0x05,
+0x34,0x42,0x04,0x00,0x24,0x63,0x00,0x01,0x3c,0x07,0xb0,0x05,0x3c,0x08,0xb0,0x05,
+0x34,0xa5,0x04,0x20,0xac,0xa3,0x00,0x00,0x00,0xc2,0x30,0x21,0x34,0xe7,0x04,0x24,
+0x35,0x08,0x02,0x28,0x24,0x02,0x00,0x01,0x24,0x03,0x00,0x20,0xac,0xe6,0x00,0x00,
+0xac,0x82,0x00,0x3c,0x03,0xe0,0x00,0x08,0xa1,0x03,0x00,0x00,0x27,0xbd,0xff,0xa8,
+0x00,0x07,0x60,0x80,0x27,0x82,0xb3,0xf0,0xaf,0xbe,0x00,0x50,0xaf,0xb7,0x00,0x4c,
+0xaf,0xb5,0x00,0x44,0xaf,0xb4,0x00,0x40,0xaf,0xbf,0x00,0x54,0xaf,0xb6,0x00,0x48,
+0xaf,0xb3,0x00,0x3c,0xaf,0xb2,0x00,0x38,0xaf,0xb1,0x00,0x34,0xaf,0xb0,0x00,0x30,
+0x01,0x82,0x10,0x21,0x8c,0x43,0x00,0x00,0x00,0xe0,0x70,0x21,0x3c,0x02,0x80,0x00,
+0x94,0x73,0x00,0x14,0x3c,0x07,0xb0,0x03,0x34,0xe7,0x00,0x20,0x24,0x42,0x1c,0xac,
+0x3c,0x03,0xb0,0x05,0xac,0xe2,0x00,0x00,0x34,0x63,0x01,0x28,0x90,0x67,0x00,0x00,
+0x00,0x13,0xa8,0xc0,0x02,0xb3,0x18,0x21,0x27,0x82,0x8f,0xf4,0x00,0x03,0x18,0x80,
+0x00,0x62,0x18,0x21,0x00,0x05,0x2c,0x00,0x00,0x07,0x3e,0x00,0x28,0xc2,0x00,0x03,
+0x00,0xc0,0xa0,0x21,0x00,0x80,0x78,0x21,0x00,0x05,0xbc,0x03,0x8c,0x68,0x00,0x18,
+0x02,0xa0,0x58,0x21,0x10,0x40,0x01,0x81,0x00,0x07,0xf6,0x03,0x00,0xde,0x10,0x07,
+0x30,0x5e,0x00,0x01,0x01,0x73,0x10,0x21,0x27,0x83,0x8f,0xf8,0x00,0x02,0x10,0x80,
+0x00,0x43,0x10,0x21,0x80,0x4d,0x00,0x06,0x8d,0x03,0x00,0x00,0x8d,0x02,0x00,0x04,
+0x8d,0x0a,0x00,0x08,0x8d,0x03,0x00,0x0c,0xaf,0xa2,0x00,0x20,0x11,0xa0,0x01,0x71,
+0xaf,0xa3,0x00,0x18,0x27,0x82,0xb3,0xf0,0x01,0x82,0x10,0x21,0x8c,0x44,0x00,0x00,
+0x00,0x00,0x00,0x00,0x90,0x83,0x00,0x16,0x00,0x00,0x00,0x00,0x30,0x63,0x00,0x04,
+0x14,0x60,0x00,0x12,0x00,0x00,0xb0,0x21,0x3c,0x02,0xb0,0x09,0x34,0x42,0x01,0x46,
+0x90,0x43,0x00,0x00,0x2a,0x84,0x00,0x04,0x10,0x80,0x01,0x56,0x30,0x65,0x00,0x01,
+0x91,0xe2,0x00,0x09,0x00,0x00,0x00,0x00,0x12,0x82,0x00,0x02,0x00,0x00,0x00,0x00,
+0x00,0x00,0x28,0x21,0x14,0xa0,0x00,0x03,0x00,0x00,0x38,0x21,0x13,0xc0,0x00,0x03,
+0x38,0xf6,0x00,0x01,0x24,0x07,0x00,0x01,0x38,0xf6,0x00,0x01,0x01,0x73,0x10,0x21,
+0x00,0x02,0x30,0x80,0x27,0x83,0x90,0x00,0x00,0xc3,0x48,0x21,0x91,0x25,0x00,0x00,
+0x8f,0xa4,0x00,0x20,0x2c,0xa3,0x00,0x04,0x00,0x04,0x11,0xc3,0x30,0x42,0x00,0x01,
+0x00,0x03,0xb0,0x0b,0x12,0xc0,0x00,0xd8,0xaf,0xa2,0x00,0x24,0x93,0x90,0xbb,0xda,
+0x00,0x0a,0x16,0x42,0x30,0x52,0x00,0x3f,0x2e,0x06,0x00,0x0c,0x10,0xc0,0x00,0xc0,
+0x00,0xa0,0x20,0x21,0x2c,0xa2,0x00,0x10,0x14,0x40,0x00,0x04,0x00,0x90,0x10,0x2b,
+0x30,0xa2,0x00,0x07,0x24,0x44,0x00,0x04,0x00,0x90,0x10,0x2b,0x10,0x40,0x00,0x0b,
+0x01,0x73,0x10,0x21,0x27,0x85,0xbb,0x0c,0x00,0x10,0x10,0x40,0x00,0x50,0x10,0x21,
+0x00,0x45,0x10,0x21,0x90,0x50,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x90,0x18,0x2b,
+0x14,0x60,0xff,0xfa,0x00,0x10,0x10,0x40,0x01,0x73,0x10,0x21,0x00,0x02,0x10,0x80,
+0x27,0x83,0x8f,0xf8,0x00,0x43,0x10,0x21,0x31,0xa4,0x00,0x01,0x10,0x80,0x00,0xa5,
+0xa0,0x50,0x00,0x07,0x3c,0x04,0xb0,0x05,0x34,0x84,0x00,0x08,0x24,0x02,0x00,0x01,
+0x3c,0x03,0x80,0x00,0xa1,0xe2,0x00,0x4e,0xac,0x83,0x00,0x00,0x8c,0x85,0x00,0x00,
+0x3c,0x02,0x00,0xf0,0x3c,0x03,0x40,0xf0,0x34,0x42,0xf0,0x00,0x34,0x63,0xf0,0x00,
+0x24,0x17,0x00,0x0e,0x24,0x13,0x01,0x06,0xac,0x82,0x00,0x00,0xac,0x83,0x00,0x00,
+0x27,0x82,0xb3,0xf0,0x01,0x82,0x10,0x21,0x8c,0x43,0x00,0x00,0x24,0x05,0x00,0x01,
+0xaf,0xa5,0x00,0x1c,0x90,0x62,0x00,0x16,0x00,0x13,0xa8,0xc0,0x32,0x51,0x00,0x02,
+0x34,0x42,0x00,0x04,0xa0,0x62,0x00,0x16,0x8f,0xa3,0x00,0x20,0x8f,0xa4,0x00,0x18,
+0x00,0x03,0x13,0x43,0x00,0x04,0x1a,0x02,0x30,0x47,0x00,0x01,0x12,0x20,0x00,0x04,
+0x30,0x64,0x07,0xff,0x2e,0x03,0x00,0x04,0x32,0x42,0x00,0x33,0x00,0x43,0x90,0x0b,
+0x8f,0xa5,0x00,0x24,0x8f,0xa6,0x00,0x1c,0x00,0x12,0x10,0x40,0x00,0x05,0x19,0xc0,
+0x00,0x47,0x10,0x21,0x00,0x06,0x2a,0x80,0x00,0x43,0x10,0x21,0x00,0x10,0x32,0x00,
+0x00,0x04,0x24,0x80,0x02,0x65,0x28,0x21,0x00,0xa4,0x28,0x21,0x00,0x46,0x10,0x21,
+0x00,0x17,0x1c,0x00,0x3c,0x04,0xc0,0x00,0x00,0x43,0x30,0x21,0x16,0x80,0x00,0x29,
+0x00,0xa4,0x28,0x21,0x3c,0x02,0xb0,0x05,0x34,0x42,0x04,0x00,0x3c,0x03,0xb0,0x05,
+0x3c,0x04,0xb0,0x05,0xac,0x46,0x00,0x00,0x34,0x63,0x04,0x04,0x34,0x84,0x02,0x28,
+0x24,0x02,0x00,0x01,0xac,0x65,0x00,0x00,0xa0,0x82,0x00,0x00,0x3c,0x02,0xb0,0x09,
+0x34,0x42,0x01,0x46,0x90,0x44,0x00,0x00,0x91,0xe3,0x00,0x09,0x30,0x86,0x00,0x01,
+0x02,0x83,0x18,0x26,0x00,0x03,0x30,0x0b,0x14,0xc0,0x00,0x03,0x00,0x00,0x28,0x21,
+0x13,0xc0,0x00,0x03,0x02,0xb3,0x10,0x21,0x24,0x05,0x00,0x01,0x02,0xb3,0x10,0x21,
+0x27,0x83,0x8f,0xf8,0x00,0x02,0x10,0x80,0x00,0x43,0x10,0x21,0x84,0x48,0x00,0x04,
+0x00,0xa0,0x30,0x21,0x00,0xe0,0x20,0x21,0x02,0x80,0x28,0x21,0x02,0xc0,0x38,0x21,
+0x0c,0x00,0x00,0x72,0xaf,0xa8,0x00,0x10,0x7b,0xbe,0x02,0xbc,0x7b,0xb6,0x02,0x7c,
+0x7b,0xb4,0x02,0x3c,0x7b,0xb2,0x01,0xfc,0x7b,0xb0,0x01,0xbc,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x58,0x24,0x02,0x00,0x01,0x12,0x82,0x00,0x3d,0x3c,0x02,0xb0,0x05,
+0x24,0x02,0x00,0x02,0x12,0x82,0x00,0x31,0x3c,0x02,0xb0,0x05,0x24,0x02,0x00,0x03,
+0x12,0x82,0x00,0x25,0x3c,0x02,0xb0,0x05,0x24,0x02,0x00,0x10,0x12,0x82,0x00,0x19,
+0x3c,0x02,0xb0,0x05,0x24,0x02,0x00,0x11,0x12,0x82,0x00,0x0d,0x3c,0x02,0xb0,0x05,
+0x24,0x02,0x00,0x12,0x16,0x82,0xff,0xd1,0x3c,0x02,0xb0,0x05,0x3c,0x03,0xb0,0x05,
+0x34,0x42,0x04,0x20,0x3c,0x04,0xb0,0x05,0x34,0x63,0x04,0x24,0xac,0x46,0x00,0x00,
+0x34,0x84,0x02,0x28,0xac,0x65,0x00,0x00,0x08,0x00,0x07,0xe2,0x24,0x02,0x00,0x20,
+0x34,0x42,0x04,0x40,0x3c,0x03,0xb0,0x05,0x3c,0x04,0xb0,0x05,0xac,0x46,0x00,0x00,
+0x34,0x63,0x04,0x44,0x34,0x84,0x02,0x28,0x24,0x02,0x00,0x40,0x08,0x00,0x07,0xe2,
+0xac,0x65,0x00,0x00,0x34,0x42,0x04,0x28,0x3c,0x03,0xb0,0x05,0x3c,0x04,0xb0,0x05,
+0xac,0x46,0x00,0x00,0x34,0x63,0x04,0x2c,0x34,0x84,0x02,0x28,0x24,0x02,0xff,0x80,
+0x08,0x00,0x07,0xe2,0xac,0x65,0x00,0x00,0x34,0x42,0x04,0x18,0x3c,0x03,0xb0,0x05,
+0x3c,0x04,0xb0,0x05,0xac,0x46,0x00,0x00,0x34,0x63,0x04,0x1c,0x34,0x84,0x02,0x28,
+0x24,0x02,0x00,0x08,0x08,0x00,0x07,0xe2,0xac,0x65,0x00,0x00,0x34,0x42,0x04,0x10,
+0x3c,0x03,0xb0,0x05,0x3c,0x04,0xb0,0x05,0xac,0x46,0x00,0x00,0x34,0x63,0x04,0x14,
+0x34,0x84,0x02,0x28,0x24,0x02,0x00,0x04,0x08,0x00,0x07,0xe2,0xac,0x65,0x00,0x00,
+0x34,0x42,0x04,0x08,0x3c,0x03,0xb0,0x05,0x3c,0x04,0xb0,0x05,0xac,0x46,0x00,0x00,
+0x34,0x63,0x04,0x0c,0x34,0x84,0x02,0x28,0x24,0x02,0x00,0x02,0x08,0x00,0x07,0xe2,
+0xac,0x65,0x00,0x00,0x24,0x17,0x00,0x14,0x08,0x00,0x07,0xb4,0x24,0x13,0x01,0x02,
+0x30,0xa2,0x00,0x07,0x24,0x44,0x00,0x0c,0x00,0x90,0x18,0x2b,0x10,0x60,0x00,0x0c,
+0x26,0x02,0x00,0x04,0x27,0x85,0xbb,0x0c,0x00,0x10,0x10,0x40,0x00,0x50,0x10,0x21,
+0x00,0x45,0x10,0x21,0x90,0x50,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x90,0x18,0x2b,
+0x14,0x60,0xff,0xfa,0x00,0x10,0x10,0x40,0x2e,0x06,0x00,0x0c,0x26,0x02,0x00,0x04,
+0x08,0x00,0x07,0x9e,0x00,0x46,0x80,0x0a,0x27,0x82,0xb3,0xf0,0x01,0x82,0x20,0x21,
+0x8c,0x87,0x00,0x00,0x00,0x00,0x00,0x00,0x90,0xe2,0x00,0x19,0x00,0x00,0x00,0x00,
+0x14,0x40,0x00,0x07,0x00,0x00,0x00,0x00,0x27,0x82,0x90,0x10,0x00,0xc2,0x10,0x21,
+0x90,0x43,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x60,0x00,0x14,0x00,0x00,0x00,0x00,
+0x90,0xe3,0x00,0x16,0x27,0x82,0x8f,0xf8,0x00,0xc2,0x10,0x21,0x34,0x63,0x00,0x20,
+0x90,0x50,0x00,0x07,0xa0,0xe3,0x00,0x16,0x8c,0x84,0x00,0x00,0x00,0x0a,0x1e,0x42,
+0x24,0x06,0x00,0x01,0x90,0x82,0x00,0x16,0x30,0x71,0x00,0x02,0x30,0x72,0x00,0x3f,
+0x30,0x42,0x00,0xfb,0x24,0x17,0x00,0x18,0x24,0x13,0x01,0x03,0x24,0x15,0x08,0x18,
+0xaf,0xa6,0x00,0x1c,0x08,0x00,0x07,0xbe,0xa0,0x82,0x00,0x16,0x8d,0x02,0x00,0x04,
+0x00,0x0a,0x1c,0x42,0x30,0x42,0x00,0x10,0x14,0x40,0x00,0x15,0x30,0x72,0x00,0x3f,
+0x81,0x22,0x00,0x05,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x11,0x30,0x72,0x00,0x3e,
+0x27,0x83,0x90,0x08,0x00,0xc3,0x18,0x21,0x80,0x64,0x00,0x00,0x27,0x83,0xb5,0x68,
+0x00,0x04,0x11,0x00,0x00,0x44,0x10,0x23,0x00,0x02,0x10,0x80,0x00,0x44,0x10,0x23,
+0x00,0x02,0x10,0x80,0x00,0x43,0x10,0x21,0x90,0x44,0x00,0x05,0x90,0x43,0x00,0x04,
+0x00,0x00,0x00,0x00,0x00,0x64,0x18,0x24,0x30,0x63,0x00,0x01,0x02,0x43,0x90,0x25,
+0x27,0x85,0xb3,0xf0,0x01,0x85,0x28,0x21,0x8c,0xa6,0x00,0x00,0x01,0x73,0x10,0x21,
+0x27,0x83,0x90,0x00,0x90,0xc4,0x00,0x16,0x00,0x02,0x10,0x80,0x00,0x43,0x10,0x21,
+0x30,0x84,0x00,0xdf,0x90,0x50,0x00,0x00,0xa0,0xc4,0x00,0x16,0x80,0xc6,0x00,0x12,
+0x8c,0xa3,0x00,0x00,0x2d,0xc4,0x00,0x02,0xaf,0xa6,0x00,0x1c,0x90,0x62,0x00,0x16,
+0x00,0x00,0x00,0x00,0x30,0x42,0x00,0xfb,0x14,0x80,0x00,0x06,0xa0,0x62,0x00,0x16,
+0x24,0x02,0x00,0x06,0x11,0xc2,0x00,0x03,0x24,0x02,0x00,0x04,0x15,0xc2,0xff,0x0e,
+0x32,0x51,0x00,0x02,0x32,0x51,0x00,0x02,0x2e,0x02,0x00,0x0c,0x14,0x40,0x00,0x0f,
+0x00,0x11,0x18,0x2b,0x32,0x02,0x00,0x0f,0x34,0x42,0x00,0x10,0x00,0x03,0x19,0x00,
+0x00,0x43,0x18,0x21,0x3c,0x02,0xb0,0x03,0x34,0x42,0x00,0xb8,0xa0,0x43,0x00,0x00,
+0x00,0x00,0x20,0x21,0x02,0x00,0x28,0x21,0x0c,0x00,0x02,0x05,0xaf,0xaf,0x00,0x28,
+0x8f,0xaf,0x00,0x28,0x08,0x00,0x07,0xbe,0x00,0x00,0x00,0x00,0x08,0x00,0x08,0xb9,
+0x32,0x03,0x00,0xff,0x3c,0x03,0xb0,0x05,0x34,0x63,0x02,0x42,0x90,0x62,0x00,0x00,
+0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x0f,0x14,0x40,0xfe,0xaa,0x00,0x00,0x00,0x00,
+0x91,0xe2,0x00,0x09,0x00,0x00,0x00,0x00,0x02,0x82,0x10,0x26,0x08,0x00,0x07,0x75,
+0x00,0x02,0x28,0x0b,0x08,0x00,0x07,0x7b,0x00,0x00,0xb0,0x21,0x24,0x02,0x00,0x10,
+0x10,0xc2,0x00,0x08,0x24,0x02,0x00,0x11,0x10,0xc2,0xfe,0x7d,0x00,0x07,0x17,0x83,
+0x24,0x02,0x00,0x12,0x14,0xc2,0xfe,0x7b,0x00,0x07,0x17,0x43,0x08,0x00,0x07,0x55,
+0x30,0x5e,0x00,0x01,0x08,0x00,0x07,0x55,0x00,0x07,0xf7,0xc2,0x00,0x04,0x10,0x40,
+0x27,0x83,0x80,0x1c,0x00,0x43,0x10,0x21,0x00,0x80,0x40,0x21,0x94,0x44,0x00,0x00,
+0x2d,0x07,0x00,0x04,0x24,0xc2,0x00,0x03,0x00,0x47,0x30,0x0a,0x00,0x86,0x00,0x18,
+0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,0x34,0x63,0x00,0x20,0x24,0x42,0x23,0x7c,
+0xac,0x62,0x00,0x00,0x2d,0x06,0x00,0x10,0x00,0x00,0x20,0x12,0x00,0x04,0x22,0x42,
+0x24,0x84,0x00,0x01,0x24,0x83,0x00,0xc0,0x10,0xe0,0x00,0x0b,0x24,0x82,0x00,0x60,
+0x00,0x40,0x20,0x21,0x00,0x65,0x20,0x0a,0x3c,0x03,0xb0,0x03,0x34,0x63,0x01,0x00,
+0x90,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x01,0x00,0x44,0x20,0x04,
+0x03,0xe0,0x00,0x08,0x00,0x80,0x10,0x21,0x24,0x85,0x00,0x28,0x24,0x83,0x00,0x24,
+0x31,0x02,0x00,0x08,0x14,0xc0,0xff,0xf4,0x24,0x84,0x00,0x14,0x00,0x60,0x20,0x21,
+0x08,0x00,0x08,0xf6,0x00,0xa2,0x20,0x0b,0x27,0xbd,0xff,0xe0,0x3c,0x03,0xb0,0x03,
+0x3c,0x02,0x80,0x00,0xaf,0xb0,0x00,0x10,0x24,0x42,0x24,0x18,0x00,0x80,0x80,0x21,
+0x34,0x63,0x00,0x20,0x3c,0x04,0xb0,0x03,0xaf,0xb2,0x00,0x18,0xaf,0xb1,0x00,0x14,
+0xaf,0xbf,0x00,0x1c,0x83,0xb1,0x00,0x33,0x83,0xa8,0x00,0x37,0x34,0x84,0x01,0x10,
+0xac,0x62,0x00,0x00,0x2e,0x02,0x00,0x10,0x00,0xe0,0x90,0x21,0x8c,0x87,0x00,0x00,
+0x14,0x40,0x00,0x0c,0x2e,0x02,0x00,0x0c,0x3c,0x02,0x00,0x0f,0x34,0x42,0xf0,0x00,
+0x00,0xe2,0x10,0x24,0x14,0x40,0x00,0x37,0x32,0x02,0x00,0x08,0x32,0x02,0x00,0x07,
+0x27,0x83,0x80,0xcc,0x00,0x43,0x10,0x21,0x90,0x50,0x00,0x00,0x00,0x00,0x00,0x00,
+0x2e,0x02,0x00,0x0c,0x14,0x40,0x00,0x03,0x02,0x00,0x20,0x21,0x32,0x02,0x00,0x0f,
+0x24,0x44,0x00,0x0c,0x00,0x87,0x10,0x06,0x30,0x42,0x00,0x01,0x14,0x40,0x00,0x07,
+0x2c,0x82,0x00,0x0c,0x00,0x04,0x10,0x80,0x27,0x83,0xb4,0x40,0x00,0x43,0x10,0x21,
+0x8c,0x44,0x00,0x00,0x00,0x00,0x00,0x00,0x2c,0x82,0x00,0x0c,0x14,0x40,0x00,0x05,
+0x00,0x05,0x10,0x40,0x00,0x46,0x10,0x21,0x00,0x02,0x11,0x00,0x00,0x82,0x10,0x21,
+0x24,0x44,0x00,0x04,0x15,0x00,0x00,0x02,0x24,0x06,0x00,0x20,0x24,0x06,0x00,0x0e,
+0x0c,0x00,0x08,0xdf,0x00,0x00,0x00,0x00,0x00,0x40,0x30,0x21,0x3c,0x02,0xb0,0x03,
+0x34,0x42,0x01,0x00,0x90,0x43,0x00,0x00,0x2e,0x04,0x00,0x04,0x24,0x02,0x00,0x10,
+0x24,0x05,0x00,0x0a,0x00,0x44,0x28,0x0a,0x30,0x63,0x00,0x01,0x14,0x60,0x00,0x02,
+0x00,0x05,0x10,0x40,0x00,0xa0,0x10,0x21,0x30,0x45,0x00,0xff,0x00,0xc5,0x10,0x21,
+0x24,0x46,0x00,0x46,0x02,0x26,0x18,0x04,0xa6,0x43,0x00,0x00,0x8f,0xbf,0x00,0x1c,
+0x8f,0xb2,0x00,0x18,0x7b,0xb0,0x00,0xbc,0x00,0xc0,0x10,0x21,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x20,0x10,0x40,0xff,0xcf,0x2e,0x02,0x00,0x0c,0x32,0x02,0x00,0x07,
+0x27,0x83,0x80,0xc4,0x00,0x43,0x10,0x21,0x90,0x44,0x00,0x00,0x08,0x00,0x09,0x24,
+0x02,0x04,0x80,0x23,0x27,0xbd,0xff,0xb8,0x00,0x05,0x38,0x80,0x27,0x82,0xb3,0xf0,
+0xaf,0xbe,0x00,0x40,0xaf,0xb6,0x00,0x38,0xaf,0xb3,0x00,0x2c,0xaf,0xbf,0x00,0x44,
+0xaf,0xb7,0x00,0x3c,0xaf,0xb5,0x00,0x34,0xaf,0xb4,0x00,0x30,0xaf,0xb2,0x00,0x28,
+0xaf,0xb1,0x00,0x24,0xaf,0xb0,0x00,0x20,0x00,0xe2,0x38,0x21,0x8c,0xe6,0x00,0x00,
+0xaf,0xa5,0x00,0x4c,0x3c,0x02,0x80,0x00,0x3c,0x05,0xb0,0x03,0x34,0xa5,0x00,0x20,
+0x24,0x42,0x25,0x74,0x24,0x03,0x00,0x01,0xac,0xa2,0x00,0x00,0xa0,0xc3,0x00,0x12,
+0x8c,0xe5,0x00,0x00,0x94,0xc3,0x00,0x06,0x90,0xa2,0x00,0x16,0xa4,0xc3,0x00,0x14,
+0x27,0x83,0x8f,0xf0,0x34,0x42,0x00,0x08,0xa0,0xa2,0x00,0x16,0x8c,0xe8,0x00,0x00,
+0xaf,0xa4,0x00,0x48,0x27,0x82,0x8f,0xf4,0x95,0x11,0x00,0x14,0x00,0x00,0x00,0x00,
+0x00,0x11,0x98,0xc0,0x02,0x71,0x20,0x21,0x00,0x04,0x20,0x80,0x00,0x82,0x10,0x21,
+0x8c,0x52,0x00,0x18,0x00,0x83,0x18,0x21,0x84,0x75,0x00,0x06,0x8e,0x45,0x00,0x08,
+0x8e,0x46,0x00,0x04,0x8e,0x47,0x00,0x04,0x00,0x05,0x1c,0x82,0x00,0x06,0x31,0x42,
+0x27,0x82,0x90,0x00,0x30,0x63,0x00,0x01,0x30,0xc6,0x00,0x01,0x00,0x82,0x20,0x21,
+0xa5,0x15,0x00,0x1a,0x00,0x05,0x14,0x42,0xaf,0xa3,0x00,0x18,0xaf,0xa6,0x00,0x1c,
+0x30,0xe7,0x00,0x10,0x30,0x56,0x00,0x01,0x80,0x97,0x00,0x06,0x14,0xe0,0x00,0x47,
+0x00,0x05,0xf7,0xc2,0x80,0x82,0x00,0x05,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x44,
+0x02,0x71,0x10,0x21,0x93,0x90,0xbb,0xd9,0x00,0x00,0x00,0x00,0x2e,0x02,0x00,0x0c,
+0x14,0x40,0x00,0x06,0x02,0x00,0x20,0x21,0x00,0x16,0x10,0x40,0x00,0x43,0x10,0x21,
+0x00,0x02,0x11,0x00,0x02,0x02,0x10,0x21,0x24,0x44,0x00,0x04,0x02,0x71,0x10,0x21,
+0x00,0x02,0x10,0x80,0x27,0x83,0x90,0x00,0x00,0x43,0x10,0x21,0x00,0x80,0x80,0x21,
+0xa0,0x44,0x00,0x03,0xa0,0x44,0x00,0x00,0x02,0x00,0x20,0x21,0x02,0xc0,0x28,0x21,
+0x0c,0x00,0x08,0xdf,0x02,0xa0,0x30,0x21,0x02,0x71,0x18,0x21,0x00,0x03,0x88,0x80,
+0x00,0x40,0xa0,0x21,0x27,0x82,0x90,0x10,0x02,0x22,0x10,0x21,0x8c,0x44,0x00,0x00,
+0x26,0xe3,0x00,0x02,0x00,0x03,0x17,0xc2,0x00,0x62,0x18,0x21,0x00,0x04,0x25,0xc2,
+0x00,0x03,0x18,0x43,0x30,0x84,0x00,0x01,0x00,0x03,0x18,0x40,0x03,0xc4,0x20,0x24,
+0x14,0x80,0x00,0x15,0x02,0x43,0x38,0x21,0x3c,0x08,0xb0,0x03,0x35,0x08,0x00,0x28,
+0x8d,0x03,0x00,0x00,0x8f,0xa6,0x00,0x4c,0x8f,0xa4,0x00,0x48,0x27,0x82,0x8f,0xf8,
+0x02,0x22,0x10,0x21,0x24,0x63,0x00,0x01,0x02,0xa0,0x28,0x21,0xa4,0x54,0x00,0x04,
+0x00,0xc0,0x38,0x21,0x0c,0x00,0x07,0x2b,0xad,0x03,0x00,0x00,0x7b,0xbe,0x02,0x3c,
+0x7b,0xb6,0x01,0xfc,0x7b,0xb4,0x01,0xbc,0x7b,0xb2,0x01,0x7c,0x7b,0xb0,0x01,0x3c,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x48,0x8f,0xa2,0x00,0x1c,0x8f,0xa6,0x00,0x18,
+0x02,0x00,0x20,0x21,0x02,0xc0,0x28,0x21,0xaf,0xa2,0x00,0x10,0x0c,0x00,0x09,0x06,
+0xaf,0xa0,0x00,0x14,0x08,0x00,0x09,0xc2,0x02,0x82,0xa0,0x21,0x02,0x71,0x10,0x21,
+0x00,0x02,0x10,0x80,0x27,0x83,0x90,0x00,0x00,0x43,0x10,0x21,0x90,0x50,0x00,0x00,
+0x08,0x00,0x09,0xae,0xa0,0x50,0x00,0x03,0x27,0xbd,0xff,0xb8,0xaf,0xb1,0x00,0x24,
+0x8f,0xb1,0x00,0x5c,0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,0x34,0x63,0x00,0x20,
+0x24,0x42,0x27,0x98,0xaf,0xbe,0x00,0x40,0xaf,0xb7,0x00,0x3c,0xaf,0xb6,0x00,0x38,
+0xaf,0xb5,0x00,0x34,0xaf,0xb4,0x00,0x30,0xaf,0xa5,0x00,0x4c,0x8f,0xb5,0x00,0x58,
+0xaf,0xbf,0x00,0x44,0xaf,0xb3,0x00,0x2c,0xaf,0xb2,0x00,0x28,0xaf,0xb0,0x00,0x20,
+0x00,0xe0,0xb0,0x21,0xac,0x62,0x00,0x00,0x00,0x80,0xf0,0x21,0x00,0x00,0xb8,0x21,
+0x16,0x20,0x00,0x2b,0x00,0x00,0xa0,0x21,0x27,0x85,0xb3,0xf0,0x00,0x07,0x10,0x80,
+0x00,0x45,0x10,0x21,0x8c,0x53,0x00,0x00,0x00,0x15,0x18,0x80,0x00,0x65,0x18,0x21,
+0x92,0x62,0x00,0x16,0x8c,0x72,0x00,0x00,0x30,0x42,0x00,0x03,0x14,0x40,0x00,0x2d,
+0x00,0x00,0x00,0x00,0x92,0x42,0x00,0x16,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x03,
+0x14,0x40,0x00,0x28,0x00,0x00,0x00,0x00,0x8c,0x82,0x00,0x34,0x00,0x00,0x00,0x00,
+0x14,0x40,0x00,0x18,0x02,0x20,0x10,0x21,0x8c,0x82,0x00,0x38,0x00,0x00,0x00,0x00,
+0x14,0x40,0x00,0x14,0x02,0x20,0x10,0x21,0x8c,0x82,0x00,0x3c,0x00,0x00,0x00,0x00,
+0x14,0x40,0x00,0x0f,0x3c,0x03,0xb0,0x09,0x3c,0x05,0xb0,0x05,0x34,0x63,0x01,0x44,
+0x34,0xa5,0x02,0x52,0x94,0x66,0x00,0x00,0x90,0xa2,0x00,0x00,0x8f,0xa3,0x00,0x4c,
+0x00,0x00,0x00,0x00,0x00,0x62,0x10,0x06,0x30,0x42,0x00,0x01,0x10,0x40,0x00,0x04,
+0x30,0xc6,0xff,0xff,0x2c,0xc2,0x00,0x41,0x10,0x40,0x00,0x09,0x24,0x05,0x00,0x14,
+0x02,0x20,0x10,0x21,0x7b,0xbe,0x02,0x3c,0x7b,0xb6,0x01,0xfc,0x7b,0xb4,0x01,0xbc,
+0x7b,0xb2,0x01,0x7c,0x7b,0xb0,0x01,0x3c,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x48,
+0x0c,0x00,0x07,0x06,0x24,0x06,0x01,0x07,0x24,0x02,0x00,0x01,0x08,0x00,0x0a,0x28,
+0xa3,0xc2,0x00,0x11,0x10,0xc0,0x00,0x1c,0x24,0x02,0x00,0x01,0x10,0xc2,0x00,0x17,
+0x00,0xc0,0x88,0x21,0x96,0x54,0x00,0x1a,0x02,0xa0,0xb8,0x21,0x12,0x20,0xff,0xed,
+0x02,0x20,0x10,0x21,0x27,0x83,0xb3,0xf0,0x00,0x17,0x10,0x80,0x00,0x43,0x10,0x21,
+0x8c,0x44,0x00,0x00,0x3c,0x03,0xb0,0x03,0x34,0x63,0x00,0x28,0x80,0x86,0x00,0x12,
+0x8c,0x62,0x00,0x00,0x00,0x14,0x2c,0x00,0x00,0x05,0x2c,0x03,0x00,0x46,0x10,0x21,
+0x8f,0xa6,0x00,0x4c,0x02,0xe0,0x38,0x21,0x03,0xc0,0x20,0x21,0x0c,0x00,0x07,0x2b,
+0xac,0x62,0x00,0x00,0x08,0x00,0x0a,0x28,0xaf,0xd1,0x00,0x40,0x96,0x74,0x00,0x1a,
+0x08,0x00,0x0a,0x3b,0x02,0xc0,0xb8,0x21,0x3c,0x02,0xb0,0x03,0x34,0x42,0x01,0x08,
+0x8c,0x50,0x00,0x00,0x02,0x60,0x20,0x21,0x0c,0x00,0x1f,0x11,0x02,0x00,0x28,0x21,
+0x30,0x42,0x00,0xff,0x02,0x00,0x28,0x21,0x02,0x40,0x20,0x21,0x0c,0x00,0x1f,0x11,
+0xaf,0xa2,0x00,0x18,0x8f,0xa4,0x00,0x18,0x00,0x00,0x00,0x00,0x10,0x80,0x00,0xed,
+0x30,0x50,0x00,0xff,0x12,0x00,0x00,0x18,0x24,0x11,0x00,0x01,0x96,0x63,0x00,0x14,
+0x96,0x44,0x00,0x14,0x27,0x85,0x8f,0xf0,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,
+0x00,0x02,0x10,0x80,0x00,0x45,0x10,0x21,0x00,0x04,0x18,0xc0,0x8c,0x46,0x00,0x08,
+0x00,0x64,0x18,0x21,0x00,0x03,0x18,0x80,0x00,0x65,0x18,0x21,0x00,0x06,0x17,0x02,
+0x24,0x04,0x00,0xff,0x8c,0x63,0x00,0x08,0x10,0x44,0x00,0xd6,0x00,0x03,0x17,0x02,
+0x10,0x44,0x00,0xd5,0x3c,0x02,0x80,0x00,0x00,0x66,0x18,0x2b,0x24,0x11,0x00,0x02,
+0x24,0x02,0x00,0x01,0x00,0x43,0x88,0x0a,0x24,0x02,0x00,0x01,0x12,0x22,0x00,0x5a,
+0x24,0x02,0x00,0x02,0x16,0x22,0xff,0xbd,0x00,0x00,0x00,0x00,0x96,0x49,0x00,0x14,
+0x27,0x82,0x8f,0xf4,0x02,0xa0,0xb8,0x21,0x00,0x09,0x50,0xc0,0x01,0x49,0x18,0x21,
+0x00,0x03,0x40,0x80,0x01,0x02,0x10,0x21,0x8c,0x43,0x00,0x18,0x00,0x00,0x00,0x00,
+0x8c,0x65,0x00,0x08,0x8c,0x62,0x00,0x0c,0x8c,0x62,0x00,0x04,0x00,0x05,0x24,0x42,
+0x00,0x05,0x1c,0x82,0x30,0x42,0x00,0x10,0x30,0x66,0x00,0x01,0x14,0x40,0x00,0x41,
+0x30,0x87,0x00,0x01,0x27,0x82,0x90,0x08,0x01,0x02,0x10,0x21,0x80,0x44,0x00,0x00,
+0x27,0x82,0xb5,0x68,0x00,0x04,0x19,0x00,0x00,0x64,0x18,0x23,0x00,0x03,0x18,0x80,
+0x00,0x64,0x18,0x23,0x00,0x03,0x18,0x80,0x00,0x62,0x10,0x21,0x90,0x45,0x00,0x05,
+0x27,0x84,0xb4,0x90,0x00,0x64,0x18,0x21,0x90,0x63,0x00,0x00,0x10,0xa0,0x00,0x2b,
+0x2c,0x64,0x00,0x0c,0x14,0x80,0x00,0x04,0x00,0x60,0x10,0x21,0x00,0x06,0x11,0x00,
+0x00,0x62,0x10,0x21,0x24,0x42,0x00,0x24,0x3c,0x01,0xb0,0x03,0xa0,0x22,0x00,0xb9,
+0x14,0x80,0x00,0x06,0x00,0x60,0x28,0x21,0x00,0x07,0x10,0x40,0x00,0x46,0x10,0x21,
+0x00,0x02,0x11,0x00,0x00,0x62,0x10,0x21,0x24,0x45,0x00,0x04,0x01,0x49,0x10,0x21,
+0x27,0x83,0x90,0x00,0x00,0x02,0x10,0x80,0x00,0x43,0x10,0x21,0x00,0xa0,0x18,0x21,
+0xa0,0x45,0x00,0x03,0xa0,0x45,0x00,0x00,0x24,0x02,0x00,0x08,0x12,0x02,0x00,0x0b,
+0x24,0x02,0x00,0x01,0x00,0x60,0x28,0x21,0x02,0x40,0x20,0x21,0x0c,0x00,0x1f,0x8d,
+0xaf,0xa2,0x00,0x10,0x30,0x54,0xff,0xff,0x92,0x42,0x00,0x16,0x00,0x00,0x00,0x00,
+0x02,0x02,0x10,0x25,0x08,0x00,0x0a,0x3b,0xa2,0x42,0x00,0x16,0x00,0x60,0x28,0x21,
+0x02,0x40,0x20,0x21,0x0c,0x00,0x1f,0x3e,0xaf,0xa0,0x00,0x10,0x08,0x00,0x0a,0xbe,
+0x30,0x54,0xff,0xff,0x08,0x00,0x0a,0xa6,0x00,0x60,0x10,0x21,0x14,0x80,0xff,0xfd,
+0x00,0x00,0x00,0x00,0x00,0x06,0x11,0x00,0x00,0x62,0x10,0x21,0x08,0x00,0x0a,0xa6,
+0x24,0x42,0x00,0x04,0x27,0x82,0x90,0x00,0x01,0x02,0x10,0x21,0x90,0x43,0x00,0x00,
+0x08,0x00,0x0a,0xb6,0xa0,0x43,0x00,0x03,0x96,0x69,0x00,0x14,0x02,0xc0,0xb8,0x21,
+0x24,0x0b,0x00,0x01,0x00,0x09,0x10,0xc0,0x00,0x49,0x18,0x21,0x00,0x03,0x40,0x80,
+0x00,0x40,0x50,0x21,0x27,0x82,0x8f,0xf4,0x01,0x02,0x10,0x21,0x8c,0x43,0x00,0x18,
+0x00,0x00,0x00,0x00,0x8c,0x65,0x00,0x08,0x8c,0x62,0x00,0x0c,0x8c,0x62,0x00,0x04,
+0x00,0x05,0x24,0x42,0x00,0x05,0x1c,0x82,0x30,0x42,0x00,0x10,0x30,0x66,0x00,0x01,
+0x10,0x40,0x00,0x0d,0x30,0x87,0x00,0x01,0x27,0x82,0x90,0x08,0x01,0x02,0x10,0x21,
+0x80,0x43,0x00,0x00,0x00,0x00,0x58,0x21,0x00,0x03,0x11,0x00,0x00,0x43,0x10,0x23,
+0x00,0x02,0x10,0x80,0x00,0x43,0x10,0x23,0x00,0x02,0x10,0x80,0x27,0x83,0xb5,0x60,
+0x00,0x43,0x10,0x21,0xa0,0x40,0x00,0x04,0x11,0x60,0x00,0x4f,0x00,0x00,0x00,0x00,
+0x01,0x49,0x10,0x21,0x00,0x02,0x20,0x80,0x27,0x85,0x90,0x00,0x00,0x85,0x10,0x21,
+0x80,0x43,0x00,0x05,0x00,0x00,0x00,0x00,0x14,0x60,0x00,0x42,0x01,0x49,0x10,0x21,
+0x27,0x82,0x90,0x08,0x00,0x82,0x10,0x21,0x80,0x44,0x00,0x00,0x27,0x82,0xb5,0x68,
+0x00,0x04,0x19,0x00,0x00,0x64,0x18,0x23,0x00,0x03,0x18,0x80,0x00,0x64,0x18,0x23,
+0x00,0x03,0x18,0x80,0x00,0x62,0x10,0x21,0x90,0x45,0x00,0x05,0x27,0x84,0xb4,0x90,
+0x00,0x64,0x18,0x21,0x90,0x63,0x00,0x00,0x10,0xa0,0x00,0x2c,0x2c,0x64,0x00,0x0c,
+0x14,0x80,0x00,0x04,0x00,0x60,0x10,0x21,0x00,0x06,0x11,0x00,0x00,0x62,0x10,0x21,
+0x24,0x42,0x00,0x24,0x3c,0x01,0xb0,0x03,0xa0,0x22,0x00,0xb9,0x14,0x80,0x00,0x06,
+0x00,0x60,0x28,0x21,0x00,0x07,0x10,0x40,0x00,0x46,0x10,0x21,0x00,0x02,0x11,0x00,
+0x00,0x62,0x10,0x21,0x24,0x45,0x00,0x04,0x01,0x49,0x10,0x21,0x27,0x83,0x90,0x00,
+0x00,0x02,0x10,0x80,0x00,0x43,0x10,0x21,0x00,0xa0,0x18,0x21,0xa0,0x45,0x00,0x03,
+0xa0,0x45,0x00,0x00,0x8f,0xa4,0x00,0x18,0x24,0x02,0x00,0x08,0x10,0x82,0x00,0x0c,
+0x00,0x60,0x28,0x21,0x24,0x02,0x00,0x01,0x02,0x60,0x20,0x21,0x0c,0x00,0x1f,0x8d,
+0xaf,0xa2,0x00,0x10,0x8f,0xa3,0x00,0x18,0x30,0x54,0xff,0xff,0x92,0x62,0x00,0x16,
+0x00,0x00,0x00,0x00,0x00,0x62,0x10,0x25,0x08,0x00,0x0a,0x3b,0xa2,0x62,0x00,0x16,
+0x02,0x60,0x20,0x21,0x0c,0x00,0x1f,0x3e,0xaf,0xa0,0x00,0x10,0x08,0x00,0x0b,0x2d,
+0x00,0x00,0x00,0x00,0x08,0x00,0x0b,0x15,0x00,0x60,0x10,0x21,0x14,0x80,0xff,0xfd,
+0x00,0x00,0x00,0x00,0x00,0x06,0x11,0x00,0x00,0x62,0x10,0x21,0x08,0x00,0x0b,0x15,
+0x24,0x42,0x00,0x04,0x00,0x02,0x10,0x80,0x00,0x45,0x10,0x21,0x90,0x43,0x00,0x00,
+0x08,0x00,0x0b,0x25,0xa0,0x43,0x00,0x03,0x27,0x85,0x90,0x00,0x08,0x00,0x0b,0x41,
+0x01,0x49,0x10,0x21,0x3c,0x02,0x80,0x00,0x00,0x62,0x18,0x26,0x08,0x00,0x0a,0x76,
+0x00,0xc2,0x30,0x26,0x12,0x00,0xff,0x2d,0x24,0x02,0x00,0x01,0x08,0x00,0x0a,0x7b,
+0x24,0x11,0x00,0x02,0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,0x27,0xbd,0xff,0xd0,
+0x24,0x42,0x2d,0x44,0x34,0x63,0x00,0x20,0x3c,0x05,0xb0,0x05,0xaf,0xb3,0x00,0x24,
+0xaf,0xb2,0x00,0x20,0xaf,0xb1,0x00,0x1c,0xaf,0xbf,0x00,0x28,0xaf,0xb0,0x00,0x18,
+0xac,0x62,0x00,0x00,0x34,0xa5,0x02,0x42,0x90,0xa2,0x00,0x00,0x00,0x80,0x90,0x21,
+0x24,0x11,0x00,0x10,0x30,0x53,0x00,0xff,0x24,0x02,0x00,0x10,0x12,0x22,0x00,0xcf,
+0x00,0x00,0x18,0x21,0x24,0x02,0x00,0x11,0x12,0x22,0x00,0xc1,0x24,0x02,0x00,0x12,
+0x12,0x22,0x00,0xb4,0x00,0x00,0x00,0x00,0x14,0x60,0x00,0xad,0xae,0x43,0x00,0x40,
+0x3c,0x02,0xb0,0x05,0x34,0x42,0x02,0x2c,0x8c,0x44,0x00,0x00,0x3c,0x03,0x00,0x02,
+0x34,0x63,0x00,0xff,0x00,0x83,0x80,0x24,0x00,0x10,0x14,0x43,0x10,0x40,0x00,0x05,
+0x00,0x00,0x00,0x00,0x8e,0x42,0x00,0x34,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x92,
+0x00,0x00,0x00,0x00,0x93,0x83,0x8b,0x61,0x00,0x00,0x00,0x00,0x30,0x62,0x00,0x02,
+0x10,0x40,0x00,0x04,0x32,0x10,0x00,0xff,0x00,0x10,0x11,0xc3,0x14,0x40,0x00,0x86,
+0x00,0x00,0x00,0x00,0x16,0x00,0x00,0x15,0x02,0x00,0x10,0x21,0x26,0x22,0x00,0x01,
+0x30,0x51,0x00,0xff,0x2e,0x23,0x00,0x13,0x14,0x60,0xff,0xdb,0x24,0x03,0x00,0x02,
+0x12,0x63,0x00,0x73,0x24,0x02,0x00,0x05,0x2a,0x62,0x00,0x03,0x10,0x40,0x00,0x58,
+0x24,0x02,0x00,0x04,0x24,0x02,0x00,0x01,0x12,0x62,0x00,0x4b,0x02,0x40,0x20,0x21,
+0x3c,0x02,0xb0,0x05,0x34,0x42,0x02,0x2c,0x8c,0x43,0x00,0x00,0x00,0x00,0x00,0x00,
+0x30,0x70,0x00,0xff,0x12,0x00,0x00,0x06,0x02,0x00,0x10,0x21,0x8f,0xbf,0x00,0x28,
+0x7b,0xb2,0x01,0x3c,0x7b,0xb0,0x00,0xfc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x30,
+0x92,0x46,0x00,0x04,0x8e,0x43,0x00,0x24,0x24,0x02,0x00,0x07,0x02,0x40,0x20,0x21,
+0x00,0x00,0x28,0x21,0x24,0x07,0x00,0x06,0xaf,0xa2,0x00,0x10,0x0c,0x00,0x09,0xe6,
+0xaf,0xa3,0x00,0x14,0xae,0x42,0x00,0x24,0x3c,0x02,0xb0,0x05,0x8c,0x42,0x02,0x2c,
+0x00,0x00,0x00,0x00,0x30,0x50,0x00,0xff,0x16,0x00,0xff,0xec,0x02,0x00,0x10,0x21,
+0x92,0x46,0x00,0x05,0x8e,0x43,0x00,0x28,0x24,0x02,0x00,0x05,0x02,0x40,0x20,0x21,
+0x24,0x05,0x00,0x01,0x24,0x07,0x00,0x04,0xaf,0xa2,0x00,0x10,0x0c,0x00,0x09,0xe6,
+0xaf,0xa3,0x00,0x14,0xae,0x42,0x00,0x28,0x3c,0x02,0xb0,0x05,0x8c,0x42,0x02,0x2c,
+0x00,0x00,0x00,0x00,0x30,0x50,0x00,0xff,0x16,0x00,0xff,0xdc,0x02,0x00,0x10,0x21,
+0x92,0x46,0x00,0x06,0x8e,0x43,0x00,0x2c,0x24,0x02,0x00,0x03,0x02,0x40,0x20,0x21,
+0x24,0x05,0x00,0x02,0x00,0x00,0x38,0x21,0xaf,0xa2,0x00,0x10,0x0c,0x00,0x09,0xe6,
+0xaf,0xa3,0x00,0x14,0xae,0x42,0x00,0x2c,0x3c,0x02,0xb0,0x05,0x8c,0x42,0x02,0x2c,
+0x00,0x00,0x00,0x00,0x30,0x50,0x00,0xff,0x16,0x00,0xff,0xcc,0x02,0x00,0x10,0x21,
+0x92,0x46,0x00,0x07,0x8e,0x43,0x00,0x30,0x24,0x02,0x00,0x02,0x02,0x40,0x20,0x21,
+0x24,0x05,0x00,0x03,0x24,0x07,0x00,0x01,0xaf,0xa2,0x00,0x10,0x0c,0x00,0x09,0xe6,
+0xaf,0xa3,0x00,0x14,0xae,0x42,0x00,0x30,0x3c,0x02,0xb0,0x05,0x8c,0x42,0x02,0x2c,
+0x08,0x00,0x0b,0x97,0x30,0x42,0x00,0xff,0x92,0x46,0x00,0x04,0x8e,0x43,0x00,0x24,
+0x24,0x02,0x00,0x07,0x00,0x00,0x28,0x21,0x24,0x07,0x00,0x06,0xaf,0xa2,0x00,0x10,
+0x0c,0x00,0x09,0xe6,0xaf,0xa3,0x00,0x14,0x08,0x00,0x0b,0x90,0xae,0x42,0x00,0x24,
+0x12,0x62,0x00,0x0d,0x24,0x02,0x00,0x03,0x24,0x02,0x00,0x08,0x16,0x62,0xff,0xa8,
+0x02,0x40,0x20,0x21,0x92,0x46,0x00,0x07,0x8e,0x42,0x00,0x30,0x24,0x05,0x00,0x03,
+0x24,0x07,0x00,0x01,0xaf,0xa3,0x00,0x10,0x0c,0x00,0x09,0xe6,0xaf,0xa2,0x00,0x14,
+0x08,0x00,0x0b,0x90,0xae,0x42,0x00,0x30,0x92,0x46,0x00,0x06,0x8e,0x43,0x00,0x2c,
+0x02,0x40,0x20,0x21,0x24,0x05,0x00,0x02,0x00,0x00,0x38,0x21,0xaf,0xa2,0x00,0x10,
+0x0c,0x00,0x09,0xe6,0xaf,0xa3,0x00,0x14,0x08,0x00,0x0b,0x90,0xae,0x42,0x00,0x2c,
+0x92,0x46,0x00,0x05,0x8e,0x43,0x00,0x28,0x02,0x40,0x20,0x21,0x24,0x05,0x00,0x01,
+0x24,0x07,0x00,0x04,0xaf,0xa2,0x00,0x10,0x0c,0x00,0x09,0xe6,0xaf,0xa3,0x00,0x14,
+0x08,0x00,0x0b,0x90,0xae,0x42,0x00,0x28,0x0c,0x00,0x01,0x59,0x24,0x04,0x00,0x01,
+0x08,0x00,0x0b,0x81,0x00,0x00,0x00,0x00,0x8f,0x84,0xb4,0x30,0xae,0x40,0x00,0x34,
+0x94,0x85,0x00,0x14,0x0c,0x00,0x1b,0x84,0x00,0x00,0x00,0x00,0x93,0x83,0x8b,0x61,
+0x00,0x00,0x00,0x00,0x30,0x62,0x00,0x02,0x10,0x40,0xff,0x69,0x00,0x00,0x00,0x00,
+0x0c,0x00,0x01,0x59,0x00,0x00,0x20,0x21,0x08,0x00,0x0b,0x79,0x00,0x00,0x00,0x00,
+0x02,0x40,0x20,0x21,0x0c,0x00,0x09,0x5d,0x02,0x20,0x28,0x21,0x08,0x00,0x0b,0x6d,
+0x3c,0x02,0xb0,0x05,0x8e,0x42,0x00,0x3c,0x00,0x00,0x00,0x00,0x14,0x40,0xff,0x4a,
+0x00,0x00,0x00,0x00,0x8f,0x82,0xb4,0x38,0x00,0x00,0x00,0x00,0x90,0x42,0x00,0x0a,
+0x00,0x00,0x00,0x00,0x00,0x02,0x18,0x2b,0x08,0x00,0x0b,0x6a,0xae,0x43,0x00,0x3c,
+0x8e,0x42,0x00,0x38,0x00,0x00,0x00,0x00,0x14,0x40,0xff,0x3d,0x24,0x02,0x00,0x12,
+0x8f,0x82,0xb4,0x34,0x00,0x00,0x00,0x00,0x90,0x42,0x00,0x0a,0x00,0x00,0x00,0x00,
+0x00,0x02,0x18,0x2b,0x08,0x00,0x0b,0x6a,0xae,0x43,0x00,0x38,0x8e,0x42,0x00,0x34,
+0x00,0x00,0x00,0x00,0x14,0x40,0xff,0x30,0x24,0x02,0x00,0x11,0x8f,0x82,0xb4,0x30,
+0x00,0x00,0x00,0x00,0x90,0x42,0x00,0x0a,0x00,0x00,0x00,0x00,0x00,0x02,0x18,0x2b,
+0x08,0x00,0x0b,0x6a,0xae,0x43,0x00,0x34,0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,
+0x27,0xbd,0xff,0xe0,0x34,0x63,0x00,0x20,0x24,0x42,0x30,0xf8,0x3c,0x08,0xb0,0x03,
+0xaf,0xb1,0x00,0x14,0xac,0x62,0x00,0x00,0x35,0x08,0x01,0x00,0xaf,0xbf,0x00,0x18,
+0xaf,0xb0,0x00,0x10,0x91,0x03,0x00,0x00,0x00,0xa0,0x48,0x21,0x24,0x11,0x00,0x0a,
+0x2c,0xa5,0x00,0x04,0x24,0x02,0x00,0x10,0x00,0x45,0x88,0x0a,0x30,0x63,0x00,0x01,
+0x00,0xc0,0x28,0x21,0x14,0x60,0x00,0x02,0x00,0x11,0x40,0x40,0x02,0x20,0x40,0x21,
+0x84,0x83,0x00,0x0c,0x31,0x11,0x00,0xff,0x01,0x20,0x20,0x21,0x00,0x03,0x10,0xc0,
+0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x80,0x27,0x83,0x8f,0xf8,0x00,0x43,0x10,0x21,
+0x84,0x43,0x00,0x04,0x24,0x06,0x00,0x0e,0x10,0xe0,0x00,0x06,0x02,0x23,0x80,0x21,
+0x02,0x00,0x10,0x21,0x8f,0xbf,0x00,0x18,0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x20,0x0c,0x00,0x08,0xdf,0x00,0x00,0x00,0x00,0x02,0x11,0x18,0x21,
+0x08,0x00,0x0c,0x60,0x00,0x62,0x80,0x21,0x27,0xbd,0xff,0xd0,0xaf,0xbf,0x00,0x28,
+0xaf,0xb4,0x00,0x20,0xaf,0xb3,0x00,0x1c,0xaf,0xb2,0x00,0x18,0xaf,0xb5,0x00,0x24,
+0xaf,0xb1,0x00,0x14,0xaf,0xb0,0x00,0x10,0x84,0x82,0x00,0x0c,0x3c,0x06,0xb0,0x03,
+0x34,0xc6,0x00,0x20,0x00,0x02,0x18,0xc0,0x00,0x62,0x18,0x21,0x00,0x03,0x18,0x80,
+0x27,0x82,0x8f,0xf4,0x00,0x62,0x10,0x21,0x8c,0x55,0x00,0x18,0x3c,0x02,0x80,0x00,
+0x24,0x42,0x31,0xa8,0xac,0xc2,0x00,0x00,0x8e,0xb0,0x00,0x08,0x27,0x82,0x8f,0xf8,
+0x00,0x62,0x18,0x21,0x90,0x71,0x00,0x07,0x00,0x10,0x86,0x43,0x32,0x10,0x00,0x01,
+0x00,0xa0,0x38,0x21,0x02,0x00,0x30,0x21,0x00,0xa0,0x98,0x21,0x02,0x20,0x28,0x21,
+0x0c,0x00,0x0c,0x3e,0x00,0x80,0x90,0x21,0x02,0x20,0x20,0x21,0x02,0x00,0x28,0x21,
+0x24,0x06,0x00,0x14,0x0c,0x00,0x08,0xdf,0x00,0x40,0xa0,0x21,0x86,0x43,0x00,0x0c,
+0x3c,0x09,0xb0,0x09,0x3c,0x08,0xb0,0x09,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,
+0x00,0x02,0x10,0x80,0x27,0x83,0x90,0x00,0x00,0x43,0x10,0x21,0x80,0x43,0x00,0x06,
+0x3c,0x07,0xb0,0x09,0x3c,0x05,0xb0,0x09,0x28,0x62,0x00,0x00,0x24,0x64,0x00,0x03,
+0x00,0x82,0x18,0x0b,0x00,0x03,0x18,0x83,0x3c,0x02,0xb0,0x09,0x00,0x03,0x18,0x80,
+0x34,0x42,0x01,0x02,0x35,0x29,0x01,0x10,0x35,0x08,0x01,0x14,0x34,0xe7,0x01,0x20,
+0x34,0xa5,0x01,0x24,0xa4,0x54,0x00,0x00,0x12,0x60,0x00,0x11,0x02,0xa3,0xa8,0x21,
+0x8e,0xa2,0x00,0x0c,0x8e,0xa3,0x00,0x08,0x00,0x02,0x14,0x00,0x00,0x03,0x1c,0x02,
+0x00,0x43,0x10,0x21,0xad,0x22,0x00,0x00,0x8e,0xa3,0x00,0x0c,0x00,0x00,0x00,0x00,
+0x00,0x03,0x1c,0x02,0xa5,0x03,0x00,0x00,0x8f,0xbf,0x00,0x28,0x7b,0xb4,0x01,0x3c,
+0x7b,0xb2,0x00,0xfc,0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x30,
+0x8e,0xa2,0x00,0x04,0x00,0x00,0x00,0x00,0xad,0x22,0x00,0x00,0x8e,0xa4,0x00,0x08,
+0x00,0x00,0x00,0x00,0xa5,0x04,0x00,0x00,0x7a,0xa2,0x00,0x7c,0x00,0x00,0x00,0x00,
+0x00,0x03,0x1c,0x00,0x00,0x02,0x14,0x02,0x00,0x62,0x18,0x21,0xac,0xe3,0x00,0x00,
+0x8e,0xa2,0x00,0x0c,0x00,0x00,0x00,0x00,0x00,0x02,0x14,0x02,0x08,0x00,0x0c,0xb2,
+0xa4,0xa2,0x00,0x00,0x27,0xbd,0xff,0xe0,0xaf,0xb2,0x00,0x18,0xaf,0xb0,0x00,0x10,
+0xaf,0xbf,0x00,0x1c,0xaf,0xb1,0x00,0x14,0x84,0x82,0x00,0x0c,0x00,0x80,0x90,0x21,
+0x3c,0x05,0xb0,0x03,0x00,0x02,0x20,0xc0,0x00,0x82,0x20,0x21,0x00,0x04,0x20,0x80,
+0x27,0x82,0x8f,0xf4,0x00,0x82,0x10,0x21,0x8c,0x51,0x00,0x18,0x3c,0x02,0x80,0x00,
+0x34,0xa5,0x00,0x20,0x24,0x42,0x33,0x24,0x27,0x83,0x8f,0xf8,0xac,0xa2,0x00,0x00,
+0x00,0x83,0x20,0x21,0x3c,0x02,0xb0,0x03,0x90,0x86,0x00,0x07,0x34,0x42,0x01,0x00,
+0x8e,0x23,0x00,0x08,0x90,0x44,0x00,0x00,0x2c,0xc5,0x00,0x04,0x24,0x02,0x00,0x10,
+0x24,0x10,0x00,0x0a,0x00,0x45,0x80,0x0a,0x00,0x03,0x1e,0x43,0x30,0x84,0x00,0x01,
+0x30,0x65,0x00,0x01,0x14,0x80,0x00,0x02,0x00,0x10,0x10,0x40,0x02,0x00,0x10,0x21,
+0x00,0xc0,0x20,0x21,0x24,0x06,0x00,0x20,0x0c,0x00,0x08,0xdf,0x30,0x50,0x00,0xff,
+0x86,0x44,0x00,0x0c,0x27,0x85,0x90,0x00,0x3c,0x06,0xb0,0x09,0x00,0x04,0x18,0xc0,
+0x00,0x64,0x18,0x21,0x00,0x03,0x18,0x80,0x00,0x65,0x18,0x21,0x80,0x64,0x00,0x06,
+0x00,0x50,0x10,0x21,0x34,0xc6,0x01,0x02,0x24,0x85,0x00,0x03,0x28,0x83,0x00,0x00,
+0x00,0xa3,0x20,0x0b,0x00,0x04,0x20,0x83,0x00,0x04,0x20,0x80,0xa4,0xc2,0x00,0x00,
+0x02,0x24,0x20,0x21,0x8c,0x83,0x00,0x04,0x3c,0x02,0xb0,0x09,0x34,0x42,0x01,0x10,
+0xac,0x43,0x00,0x00,0x8c,0x86,0x00,0x08,0x3c,0x02,0xb0,0x09,0x34,0x42,0x01,0x14,
+0xa4,0x46,0x00,0x00,0x8c,0x85,0x00,0x0c,0x8c,0x82,0x00,0x08,0x3c,0x06,0xb0,0x09,
+0x00,0x05,0x2c,0x00,0x00,0x02,0x14,0x02,0x00,0xa2,0x28,0x21,0x34,0xc6,0x01,0x20,
+0xac,0xc5,0x00,0x00,0x8c,0x83,0x00,0x0c,0x3c,0x05,0xb0,0x09,0x34,0xa5,0x01,0x24,
+0x00,0x03,0x1c,0x02,0xa4,0xa3,0x00,0x00,0x92,0x42,0x00,0x0a,0x3c,0x03,0xb0,0x09,
+0x34,0x63,0x01,0x30,0x00,0x02,0x13,0x00,0x24,0x42,0x00,0x04,0x30,0x42,0xff,0xff,
+0xa4,0x62,0x00,0x00,0x86,0x44,0x00,0x0c,0x27,0x83,0x90,0x08,0x8f,0xbf,0x00,0x1c,
+0x00,0x04,0x10,0xc0,0x00,0x44,0x10,0x21,0x00,0x02,0x10,0x80,0x00,0x43,0x10,0x21,
+0x94,0x44,0x00,0x02,0x8f,0xb2,0x00,0x18,0x7b,0xb0,0x00,0xbc,0x3c,0x05,0xb0,0x09,
+0x34,0xa5,0x01,0x32,0xa4,0xa4,0x00,0x00,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x20,
+0x27,0xbd,0xff,0xe0,0x3c,0x02,0xb0,0x03,0x3c,0x03,0x80,0x00,0xaf,0xb0,0x00,0x10,
+0x34,0x42,0x00,0x20,0x00,0xa0,0x80,0x21,0x24,0x63,0x34,0xb0,0x00,0x05,0x2c,0x43,
+0xaf,0xb1,0x00,0x14,0xaf,0xbf,0x00,0x18,0xac,0x43,0x00,0x00,0x10,0xa0,0x00,0x05,
+0x00,0x80,0x88,0x21,0x8c,0x82,0x00,0x34,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0xb6,
+0x00,0x00,0x00,0x00,0x32,0x10,0x00,0xff,0x12,0x00,0x00,0x4c,0x00,0x00,0x10,0x21,
+0x24,0x02,0x00,0x08,0x12,0x02,0x00,0xa3,0x2a,0x02,0x00,0x09,0x10,0x40,0x00,0x89,
+0x24,0x02,0x00,0x40,0x24,0x04,0x00,0x02,0x12,0x04,0x00,0x79,0x2a,0x02,0x00,0x03,
+0x10,0x40,0x00,0x69,0x24,0x02,0x00,0x04,0x24,0x02,0x00,0x01,0x12,0x02,0x00,0x5a,
+0x00,0x00,0x00,0x00,0x3c,0x02,0xb0,0x05,0x34,0x42,0x00,0x08,0x3c,0x03,0x80,0x00,
+0xa2,0x20,0x00,0x4e,0xac,0x43,0x00,0x00,0x82,0x24,0x00,0x11,0x92,0x27,0x00,0x11,
+0x10,0x80,0x00,0x4e,0x00,0x00,0x00,0x00,0x92,0x26,0x00,0x0a,0x24,0x02,0x00,0x12,
+0x10,0x46,0x00,0x09,0x30,0xc2,0x00,0xff,0x27,0x83,0xb3,0xf0,0x00,0x02,0x10,0x80,
+0x00,0x43,0x10,0x21,0x8c,0x44,0x00,0x00,0x00,0x00,0x00,0x00,0x94,0x83,0x00,0x14,
+0x00,0x00,0x00,0x00,0xa6,0x23,0x00,0x0c,0x3c,0x02,0xb0,0x09,0x34,0x42,0x00,0x40,
+0x90,0x43,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x63,0x00,0x03,0xa2,0x23,0x00,0x10,
+0x14,0x60,0x00,0x2b,0x30,0x65,0x00,0x01,0x30,0xc2,0x00,0xff,0x27,0x83,0xb3,0xf0,
+0x00,0x02,0x10,0x80,0x00,0x43,0x10,0x21,0x8c,0x44,0x00,0x00,0x82,0x23,0x00,0x12,
+0x90,0x82,0x00,0x16,0x00,0x00,0x00,0x00,0x00,0x02,0x11,0x42,0x30,0x42,0x00,0x01,
+0x00,0x62,0x18,0x21,0x00,0x03,0x26,0x00,0x14,0x80,0x00,0x18,0xa2,0x23,0x00,0x12,
+0x00,0x07,0x16,0x00,0x14,0x40,0x00,0x11,0x24,0x02,0x00,0x01,0x96,0x23,0x00,0x0c,
+0x27,0x84,0x90,0x00,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x80,
+0x00,0x44,0x10,0x21,0x80,0x45,0x00,0x06,0x00,0x03,0x1a,0x00,0x3c,0x02,0xb0,0x00,
+0x00,0x65,0x18,0x21,0x00,0x62,0x18,0x21,0x90,0x64,0x00,0x00,0x90,0x62,0x00,0x04,
+0xa2,0x20,0x00,0x15,0xa3,0x80,0x8b,0xc4,0x24,0x02,0x00,0x01,0x8f,0xbf,0x00,0x18,
+0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x20,0x0c,0x00,0x0c,0xc9,
+0x02,0x20,0x20,0x21,0x92,0x27,0x00,0x11,0x08,0x00,0x0d,0x79,0x00,0x07,0x16,0x00,
+0x0c,0x00,0x0c,0x6a,0x02,0x20,0x20,0x21,0x86,0x23,0x00,0x0c,0x27,0x84,0x8f,0xf8,
+0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x80,0x00,0x44,0x20,0x21,
+0x90,0x85,0x00,0x07,0x27,0x83,0x90,0x00,0x00,0x43,0x10,0x21,0xa2,0x25,0x00,0x13,
+0x90,0x83,0x00,0x07,0x08,0x00,0x0d,0x91,0xa0,0x43,0x00,0x02,0x92,0x26,0x00,0x0a,
+0x08,0x00,0x0d,0x5a,0x30,0xc2,0x00,0xff,0x8e,0x22,0x00,0x24,0x00,0x00,0x00,0x00,
+0x10,0x50,0x00,0x07,0xa2,0x20,0x00,0x08,0x24,0x02,0x00,0x07,0xa2,0x22,0x00,0x0a,
+0x92,0x22,0x00,0x27,0xae,0x20,0x00,0x24,0x08,0x00,0x0d,0x4d,0xa2,0x22,0x00,0x04,
+0x08,0x00,0x0d,0xab,0x24,0x02,0x00,0x06,0x16,0x02,0xff,0x9b,0x3c,0x02,0xb0,0x05,
+0x8e,0x23,0x00,0x2c,0x24,0x02,0x00,0x01,0x10,0x62,0x00,0x07,0xa2,0x24,0x00,0x08,
+0x24,0x02,0x00,0x03,0xa2,0x22,0x00,0x0a,0x92,0x22,0x00,0x2f,0xae,0x20,0x00,0x2c,
+0x08,0x00,0x0d,0x4d,0xa2,0x22,0x00,0x06,0x08,0x00,0x0d,0xba,0xa2,0x20,0x00,0x0a,
+0x8e,0x22,0x00,0x28,0x24,0x03,0x00,0x01,0x24,0x04,0x00,0x01,0x10,0x44,0x00,0x07,
+0xa2,0x23,0x00,0x08,0x24,0x02,0x00,0x05,0xa2,0x22,0x00,0x0a,0x92,0x22,0x00,0x2b,
+0xae,0x20,0x00,0x28,0x08,0x00,0x0d,0x4d,0xa2,0x22,0x00,0x05,0x08,0x00,0x0d,0xc6,
+0x24,0x02,0x00,0x04,0x12,0x02,0x00,0x12,0x2a,0x02,0x00,0x41,0x10,0x40,0x00,0x09,
+0x24,0x02,0x00,0x80,0x24,0x02,0x00,0x20,0x16,0x02,0xff,0x7b,0x3c,0x02,0xb0,0x05,
+0x24,0x02,0x00,0x12,0xa2,0x22,0x00,0x0a,0xa2,0x22,0x00,0x08,0x08,0x00,0x0d,0x4d,
+0xae,0x20,0x00,0x3c,0x16,0x02,0xff,0x74,0x3c,0x02,0xb0,0x05,0x24,0x02,0x00,0x10,
+0xa2,0x22,0x00,0x0a,0xa2,0x22,0x00,0x08,0x08,0x00,0x0d,0x4d,0xae,0x20,0x00,0x34,
+0x24,0x02,0x00,0x11,0xa2,0x22,0x00,0x0a,0xa2,0x22,0x00,0x08,0x08,0x00,0x0d,0x4d,
+0xae,0x20,0x00,0x38,0x8e,0x24,0x00,0x30,0x24,0x02,0x00,0x03,0x24,0x03,0x00,0x01,
+0x10,0x83,0x00,0x07,0xa2,0x22,0x00,0x08,0x24,0x02,0x00,0x02,0xa2,0x22,0x00,0x0a,
+0x92,0x22,0x00,0x33,0xae,0x20,0x00,0x30,0x08,0x00,0x0d,0x4d,0xa2,0x22,0x00,0x07,
+0x08,0x00,0x0d,0xec,0xa2,0x24,0x00,0x0a,0x8f,0x84,0xb4,0x30,0xae,0x20,0x00,0x34,
+0x94,0x85,0x00,0x14,0x0c,0x00,0x1b,0x84,0x32,0x10,0x00,0xff,0x08,0x00,0x0d,0x3e,
+0x00,0x00,0x00,0x00,0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,0x24,0x42,0x37,0xe4,
+0x34,0x63,0x00,0x20,0xac,0x62,0x00,0x00,0x80,0xa2,0x00,0x15,0x3c,0x06,0xb0,0x05,
+0x10,0x40,0x00,0x0a,0x34,0xc6,0x02,0x54,0x83,0x83,0x8b,0xc4,0x00,0x00,0x00,0x00,
+0xac,0x83,0x00,0x24,0x8c,0xc2,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x17,0x42,
+0x30,0x42,0x00,0x01,0x03,0xe0,0x00,0x08,0xac,0x82,0x00,0x28,0x8c,0x82,0x00,0x2c,
+0x3c,0x06,0xb0,0x05,0x34,0xc6,0x04,0x50,0x00,0x02,0x18,0x43,0x30,0x63,0x00,0x01,
+0x10,0x40,0x00,0x04,0x30,0x45,0x00,0x01,0xac,0x83,0x00,0x28,0x03,0xe0,0x00,0x08,
+0xac,0x85,0x00,0x24,0x90,0xc2,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0xff,
+0x30,0x43,0x00,0x02,0x30,0x42,0x00,0x01,0xac,0x83,0x00,0x28,0x03,0xe0,0x00,0x08,
+0xac,0x82,0x00,0x24,0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,0x27,0xbd,0xff,0xd8,
+0x34,0x63,0x00,0x20,0x24,0x42,0x38,0x74,0xac,0x62,0x00,0x00,0xaf,0xb1,0x00,0x1c,
+0xaf,0xbf,0x00,0x20,0xaf,0xb0,0x00,0x18,0x90,0xa6,0x00,0x0a,0x27,0x83,0xb3,0xf0,
+0x00,0xa0,0x88,0x21,0x00,0x06,0x10,0x80,0x00,0x43,0x10,0x21,0x8c,0x50,0x00,0x00,
+0x80,0xa5,0x00,0x11,0x92,0x03,0x00,0x12,0x10,0xa0,0x00,0x04,0xa2,0x20,0x00,0x15,
+0x24,0x02,0x00,0x12,0x10,0xc2,0x00,0xda,0x00,0x00,0x00,0x00,0x82,0x22,0x00,0x12,
+0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x67,0x00,0x00,0x00,0x00,0xa2,0x20,0x00,0x12,
+0xa2,0x00,0x00,0x19,0x86,0x23,0x00,0x0c,0x00,0x00,0x00,0x00,0x00,0x03,0x10,0xc0,
+0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x80,0x27,0x83,0x90,0x10,0x00,0x43,0x10,0x21,
+0xa0,0x40,0x00,0x00,0x92,0x03,0x00,0x16,0x00,0x00,0x00,0x00,0x30,0x63,0x00,0xdf,
+0xa2,0x03,0x00,0x16,0x82,0x02,0x00,0x12,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x20,
+0x00,0x00,0x00,0x00,0x92,0x23,0x00,0x08,0x00,0x00,0x00,0x00,0x14,0x60,0x00,0x45,
+0x24,0x02,0x00,0x01,0xa2,0x20,0x00,0x04,0x92,0x08,0x00,0x04,0x00,0x00,0x00,0x00,
+0x15,0x00,0x00,0x1e,0x24,0x02,0x00,0x01,0x92,0x07,0x00,0x0a,0xa2,0x02,0x00,0x17,
+0x92,0x02,0x00,0x16,0x30,0xe3,0x00,0xff,0x30,0x42,0x00,0xe4,0x10,0x60,0x00,0x03,
+0xa2,0x02,0x00,0x16,0x34,0x42,0x00,0x01,0xa2,0x02,0x00,0x16,0x11,0x00,0x00,0x05,
+0x00,0x00,0x00,0x00,0x92,0x02,0x00,0x16,0x00,0x00,0x00,0x00,0x34,0x42,0x00,0x02,
+0xa2,0x02,0x00,0x16,0x92,0x02,0x00,0x17,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x08,
+0x00,0x00,0x00,0x00,0x96,0x02,0x00,0x06,0x00,0x00,0x00,0x00,0xa6,0x02,0x00,0x14,
+0x8f,0xbf,0x00,0x20,0x7b,0xb0,0x00,0xfc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x28,
+0x96,0x02,0x00,0x00,0x08,0x00,0x0e,0x68,0xa6,0x02,0x00,0x14,0x92,0x07,0x00,0x0a,
+0x00,0x00,0x00,0x00,0x14,0xe0,0x00,0x03,0x00,0x00,0x00,0x00,0x08,0x00,0x0e,0x54,
+0xa2,0x00,0x00,0x17,0x96,0x04,0x00,0x00,0x96,0x05,0x00,0x06,0x27,0x86,0x8f,0xf0,
+0x00,0x04,0x18,0xc0,0x00,0x64,0x18,0x21,0x00,0x05,0x10,0xc0,0x00,0x45,0x10,0x21,
+0x00,0x03,0x18,0x80,0x00,0x66,0x18,0x21,0x00,0x02,0x10,0x80,0x00,0x46,0x10,0x21,
+0x8c,0x66,0x00,0x08,0x8c,0x45,0x00,0x08,0x3c,0x03,0x80,0x00,0x00,0xc3,0x20,0x24,
+0x10,0x80,0x00,0x08,0x00,0xa3,0x10,0x24,0x10,0x40,0x00,0x04,0x00,0x00,0x18,0x21,
+0x10,0x80,0x00,0x02,0x24,0x03,0x00,0x01,0x00,0xa6,0x18,0x2b,0x08,0x00,0x0e,0x54,
+0xa2,0x03,0x00,0x17,0x10,0x40,0xff,0xfd,0x00,0xa6,0x18,0x2b,0x08,0x00,0x0e,0x88,
+0x00,0x00,0x00,0x00,0x10,0x62,0x00,0x09,0x24,0x02,0x00,0x02,0x10,0x62,0x00,0x05,
+0x24,0x02,0x00,0x03,0x14,0x62,0xff,0xb8,0x00,0x00,0x00,0x00,0x08,0x00,0x0e,0x4e,
+0xa2,0x20,0x00,0x07,0x08,0x00,0x0e,0x4e,0xa2,0x20,0x00,0x06,0x08,0x00,0x0e,0x4e,
+0xa2,0x20,0x00,0x05,0x82,0x22,0x00,0x10,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x69,
+0x2c,0x62,0x00,0x02,0x10,0x40,0x00,0x49,0x3c,0x02,0xb0,0x09,0x92,0x25,0x00,0x08,
+0x00,0x00,0x00,0x00,0x30,0xa6,0x00,0xff,0x2c,0xc2,0x00,0x04,0x10,0x40,0x00,0x3b,
+0x2c,0xc2,0x00,0x10,0x3c,0x04,0xb0,0x05,0x34,0x84,0x02,0x29,0x90,0x83,0x00,0x00,
+0x24,0x02,0x00,0x01,0x00,0xc2,0x10,0x04,0x00,0x02,0x10,0x27,0x00,0x62,0x18,0x24,
+0xa0,0x83,0x00,0x00,0x86,0x23,0x00,0x0c,0x96,0x26,0x00,0x0c,0x00,0x03,0x10,0xc0,
+0x00,0x43,0x10,0x21,0x00,0x02,0x28,0x80,0x27,0x83,0x8f,0xf4,0x00,0xa3,0x18,0x21,
+0x8c,0x64,0x00,0x18,0x00,0x00,0x00,0x00,0x8c,0x82,0x00,0x04,0x00,0x00,0x00,0x00,
+0x30,0x42,0x00,0x10,0x10,0x40,0x00,0x18,0x24,0x07,0x00,0x01,0x93,0x82,0x8b,0x61,
+0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x01,0x14,0x40,0x00,0x0a,0x24,0x05,0x00,0x24,
+0x00,0x06,0x2c,0x00,0x00,0x05,0x2c,0x03,0x0c,0x00,0x1b,0x84,0x02,0x00,0x20,0x21,
+0x92,0x02,0x00,0x16,0xa2,0x00,0x00,0x12,0x30,0x42,0x00,0xe7,0x08,0x00,0x0e,0x45,
+0xa2,0x02,0x00,0x16,0xf0,0xc5,0x00,0x06,0x00,0x00,0x28,0x12,0x27,0x82,0x8f,0xf0,
+0x00,0xa2,0x28,0x21,0x0c,0x00,0x01,0x4b,0x3c,0x04,0x00,0x80,0x96,0x26,0x00,0x0c,
+0x08,0x00,0x0e,0xc5,0x00,0x06,0x2c,0x00,0x27,0x83,0x90,0x00,0x27,0x82,0x90,0x08,
+0x00,0xa2,0x10,0x21,0x00,0xa3,0x18,0x21,0x90,0x44,0x00,0x00,0x90,0x65,0x00,0x05,
+0x93,0x82,0x80,0x10,0x00,0x00,0x30,0x21,0x0c,0x00,0x21,0xf5,0xaf,0xa2,0x00,0x10,
+0x96,0x26,0x00,0x0c,0x08,0x00,0x0e,0xbf,0x00,0x00,0x00,0x00,0x14,0x40,0xff,0xcd,
+0x3c,0x04,0xb0,0x05,0x34,0x84,0x02,0x29,0x90,0x83,0x00,0x00,0x30,0xa5,0x00,0x0f,
+0x24,0x02,0x00,0x80,0x08,0x00,0x0e,0xae,0x00,0xa2,0x10,0x07,0x86,0x26,0x00,0x0c,
+0x3c,0x03,0xb0,0x09,0x34,0x42,0x01,0x72,0x34,0x63,0x01,0x78,0x94,0x47,0x00,0x00,
+0x8c,0x65,0x00,0x00,0x00,0x06,0x10,0xc0,0x00,0x46,0x10,0x21,0x3c,0x04,0xb0,0x09,
+0xae,0x25,0x00,0x1c,0x34,0x84,0x01,0x7c,0x27,0x83,0x8f,0xf4,0x00,0x02,0x10,0x80,
+0x8c,0x85,0x00,0x00,0x00,0x43,0x10,0x21,0x8c,0x43,0x00,0x18,0xae,0x25,0x00,0x20,
+0xa6,0x27,0x00,0x18,0x8c,0x66,0x00,0x08,0x02,0x20,0x20,0x21,0x0c,0x00,0x0f,0x15,
+0x00,0x00,0x28,0x21,0x86,0x25,0x00,0x18,0x8e,0x26,0x00,0x1c,0x8e,0x27,0x00,0x20,
+0x02,0x20,0x20,0x21,0x0c,0x00,0x1c,0x86,0xaf,0xa2,0x00,0x10,0x08,0x00,0x0e,0x45,
+0xa2,0x02,0x00,0x12,0x92,0x22,0x00,0x08,0x08,0x00,0x0e,0x45,0xa2,0x22,0x00,0x09,
+0xa2,0x20,0x00,0x11,0x80,0x82,0x00,0x50,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x03,
+0x3c,0x02,0xb0,0x03,0x34,0x42,0x00,0xd0,0xac,0x40,0x00,0x00,0x08,0x00,0x0e,0x45,
+0xa0,0x80,0x00,0x50,0x94,0x8a,0x00,0x0c,0x24,0x03,0x00,0x24,0x00,0x80,0x70,0x21,
+0x3c,0x02,0x80,0x00,0x3c,0x04,0xb0,0x03,0x24,0x42,0x3c,0x54,0xf1,0x43,0x00,0x06,
+0x34,0x84,0x00,0x20,0x00,0x00,0x18,0x12,0x00,0xa0,0x68,0x21,0xac,0x82,0x00,0x00,
+0x27,0x85,0x90,0x00,0x27,0x82,0x8f,0xff,0x27,0xbd,0xff,0xf8,0x00,0x62,0x60,0x21,
+0x00,0x65,0x58,0x21,0x00,0x00,0xc0,0x21,0x11,0xa0,0x00,0xcc,0x00,0x00,0x78,0x21,
+0x00,0x0a,0x1c,0x00,0x00,0x03,0x1c,0x03,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,
+0x00,0x02,0x10,0x80,0x00,0x45,0x10,0x21,0x91,0x87,0x00,0x00,0x80,0x48,0x00,0x04,
+0x03,0xa0,0x60,0x21,0x00,0x0a,0x1c,0x00,0x00,0x03,0x1c,0x03,0x00,0x03,0x10,0xc0,
+0x00,0x43,0x10,0x21,0x00,0x02,0x48,0x80,0x27,0x83,0x8f,0xf4,0xa3,0xa7,0x00,0x00,
+0x01,0x23,0x18,0x21,0x8c,0x64,0x00,0x18,0x25,0x02,0xff,0xff,0x00,0x48,0x40,0x0b,
+0x8c,0x83,0x00,0x04,0x2d,0x05,0x00,0x07,0x24,0x02,0x00,0x06,0x30,0x63,0x00,0x08,
+0x14,0x60,0x00,0x35,0x00,0x45,0x40,0x0a,0x93,0xa7,0x00,0x00,0x27,0x82,0x90,0x08,
+0x01,0x22,0x10,0x21,0x30,0xe3,0x00,0xf0,0x38,0x63,0x00,0x50,0x30,0xe5,0x00,0xff,
+0x00,0x05,0x20,0x2b,0x00,0x03,0x18,0x2b,0x00,0x64,0x18,0x24,0x90,0x49,0x00,0x00,
+0x10,0x60,0x00,0x16,0x30,0xe4,0x00,0x0f,0x24,0x02,0x00,0x04,0x10,0xa2,0x00,0x9d,
+0x00,0x00,0x00,0x00,0x11,0xa0,0x00,0x3a,0x2c,0xa2,0x00,0x0c,0x10,0x40,0x00,0x02,
+0x24,0x84,0x00,0x0c,0x00,0xe0,0x20,0x21,0x30,0x84,0x00,0xff,0x00,0x04,0x10,0x40,
+0x27,0x83,0xbb,0x0c,0x00,0x44,0x10,0x21,0x00,0x43,0x10,0x21,0x90,0x47,0x00,0x00,
+0x00,0x00,0x00,0x00,0x2c,0xe3,0x00,0x0c,0xa3,0xa7,0x00,0x00,0x10,0x60,0x00,0x02,
+0x24,0xe2,0x00,0x04,0x00,0xe0,0x10,0x21,0xa3,0xa2,0x00,0x00,0x91,0x65,0x00,0x00,
+0x91,0x82,0x00,0x00,0x30,0xa3,0x00,0xff,0x00,0x62,0x10,0x2b,0x10,0x40,0x00,0x0e,
+0x2c,0x62,0x00,0x0c,0x14,0x40,0x00,0x03,0x00,0x60,0x20,0x21,0x30,0xa2,0x00,0x0f,
+0x24,0x44,0x00,0x0c,0x00,0x04,0x10,0x40,0x00,0x44,0x20,0x21,0x27,0x83,0xbb,0x0c,
+0x00,0x83,0x18,0x21,0x90,0x62,0x00,0x02,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x05,
+0x00,0x09,0x11,0x00,0xa1,0x85,0x00,0x00,0x93,0xa2,0x00,0x00,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x08,0x00,0x49,0x10,0x23,0x00,0x02,0x10,0x80,0x00,0x49,0x10,0x23,
+0x00,0x02,0x10,0x80,0x00,0x44,0x10,0x21,0x27,0x83,0xb4,0x98,0x00,0x43,0x10,0x21,
+0x90,0x44,0x00,0x00,0x00,0x00,0x00,0x00,0x2c,0x83,0x00,0x0c,0x14,0x60,0x00,0x06,
+0x00,0x80,0x10,0x21,0x00,0x18,0x10,0x40,0x00,0x4f,0x10,0x21,0x00,0x02,0x11,0x00,
+0x00,0x82,0x10,0x21,0x24,0x42,0x00,0x04,0x08,0x00,0x0f,0x76,0xa1,0x82,0x00,0x00,
+0x8f,0x8d,0x81,0x5c,0x00,0x00,0x00,0x00,0x01,0xa8,0x10,0x21,0x90,0x43,0x00,0x00,
+0x00,0x00,0x00,0x00,0x10,0x60,0xff,0xd1,0x00,0x00,0x28,0x21,0x00,0x06,0x74,0x82,
+0x30,0xe2,0x00,0xff,0x2c,0x42,0x00,0x0c,0x14,0x40,0x00,0x03,0x00,0xe0,0x10,0x21,
+0x30,0xe2,0x00,0x0f,0x24,0x42,0x00,0x0c,0x30,0x44,0x00,0xff,0xa3,0xa2,0x00,0x00,
+0x24,0x02,0x00,0x0c,0x10,0x82,0x00,0x0d,0x00,0x09,0x11,0x00,0x00,0x49,0x10,0x23,
+0x00,0x02,0x10,0x80,0x00,0x04,0x18,0x40,0x00,0x49,0x10,0x23,0x00,0x64,0x18,0x21,
+0x00,0x02,0x10,0x80,0x00,0x43,0x10,0x21,0x27,0x84,0xb4,0x98,0x00,0x44,0x10,0x21,
+0x90,0x47,0x00,0x00,0x00,0x00,0x00,0x00,0xa3,0xa7,0x00,0x00,0x00,0x0a,0x1c,0x00,
+0x00,0x03,0x1c,0x03,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x80,
+0x27,0x83,0x8f,0xf4,0x00,0x43,0x10,0x21,0x8c,0x44,0x00,0x18,0x00,0x00,0x00,0x00,
+0x8c,0x83,0x00,0x04,0x00,0x00,0x00,0x00,0x30,0x63,0x00,0x10,0x14,0x60,0x00,0x33,
+0x00,0x06,0x14,0x42,0x00,0x09,0x11,0x00,0x00,0x49,0x10,0x23,0x00,0x02,0x10,0x80,
+0x00,0x49,0x10,0x23,0x27,0x83,0xb5,0x68,0x00,0x02,0x10,0x80,0x00,0x43,0x10,0x21,
+0x90,0x44,0x00,0x04,0x90,0x43,0x00,0x05,0x00,0x00,0x00,0x00,0x00,0x64,0xc0,0x24,
+0x93,0xa7,0x00,0x00,0x00,0x00,0x00,0x00,0x2c,0xe2,0x00,0x0f,0x10,0x40,0x00,0x0f,
+0x31,0xcf,0x00,0x01,0x00,0x0a,0x1c,0x00,0x00,0x03,0x1c,0x03,0x00,0x03,0x10,0xc0,
+0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x80,0x27,0x84,0x8f,0xf0,0x00,0x44,0x10,0x21,
+0x84,0x43,0x00,0x06,0x00,0x00,0x00,0x00,0x28,0x63,0x06,0x41,0x14,0x60,0x00,0x04,
+0x30,0xe2,0x00,0xff,0x24,0x07,0x00,0x0f,0xa3,0xa7,0x00,0x00,0x30,0xe2,0x00,0xff,
+0x2c,0x42,0x00,0x0c,0x14,0x40,0x00,0x06,0x00,0xe0,0x10,0x21,0x00,0x18,0x10,0x40,
+0x00,0x4f,0x10,0x21,0x00,0x02,0x11,0x00,0x00,0x47,0x10,0x21,0x24,0x42,0x00,0x04,
+0xa3,0xa2,0x00,0x00,0x00,0x40,0x38,0x21,0x01,0xa8,0x10,0x21,0x90,0x43,0x00,0x00,
+0x24,0xa4,0x00,0x01,0x30,0x85,0xff,0xff,0x00,0xa3,0x18,0x2b,0x14,0x60,0xff,0xad,
+0x30,0xe2,0x00,0xff,0x08,0x00,0x0f,0x63,0x00,0x00,0x00,0x00,0x08,0x00,0x0f,0xc4,
+0x30,0x58,0x00,0x01,0x81,0xc2,0x00,0x48,0x00,0x00,0x00,0x00,0x10,0x40,0xff,0x73,
+0x00,0x00,0x00,0x00,0x08,0x00,0x0f,0x51,0x00,0x00,0x00,0x00,0x00,0x0a,0x1c,0x00,
+0x00,0x03,0x1c,0x03,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x80,
+0x00,0x45,0x10,0x21,0x80,0x48,0x00,0x05,0x91,0x67,0x00,0x00,0x08,0x00,0x0f,0x31,
+0x03,0xa0,0x58,0x21,0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,0x34,0x63,0x00,0x20,
+0x24,0x42,0x3f,0xf4,0x03,0xe0,0x00,0x08,0xac,0x62,0x00,0x00,0x27,0xbd,0xff,0xc0,
+0xaf,0xb7,0x00,0x34,0xaf,0xb6,0x00,0x30,0xaf,0xb5,0x00,0x2c,0xaf,0xb4,0x00,0x28,
+0xaf,0xb3,0x00,0x24,0xaf,0xb2,0x00,0x20,0xaf,0xbf,0x00,0x3c,0xaf,0xbe,0x00,0x38,
+0xaf,0xb1,0x00,0x1c,0xaf,0xb0,0x00,0x18,0x84,0x82,0x00,0x0c,0x27,0x93,0x8f,0xf4,
+0x3c,0x05,0xb0,0x03,0x00,0x02,0x18,0xc0,0x00,0x62,0x18,0x21,0x00,0x03,0x18,0x80,
+0x00,0x73,0x10,0x21,0x8c,0x5e,0x00,0x18,0x3c,0x02,0x80,0x00,0x34,0xa5,0x00,0x20,
+0x24,0x42,0x40,0x0c,0xac,0xa2,0x00,0x00,0x8f,0xd0,0x00,0x08,0x27,0x95,0x90,0x00,
+0x00,0x75,0x18,0x21,0x00,0x00,0x28,0x21,0x02,0x00,0x30,0x21,0x90,0x71,0x00,0x00,
+0x0c,0x00,0x0f,0x15,0x00,0x80,0xb0,0x21,0x00,0x40,0x90,0x21,0x00,0x10,0x14,0x42,
+0x30,0x54,0x00,0x01,0x02,0x40,0x20,0x21,0x00,0x10,0x14,0x82,0x02,0x80,0x28,0x21,
+0x12,0x51,0x00,0x23,0x00,0x10,0xbf,0xc2,0x86,0xc3,0x00,0x0c,0x30,0x50,0x00,0x01,
+0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x80,0x00,0x55,0x10,0x21,
+0xa0,0x52,0x00,0x00,0x86,0xc3,0x00,0x0c,0x00,0x00,0x00,0x00,0x00,0x03,0x10,0xc0,
+0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x80,0x00,0x53,0x30,0x21,0x8c,0xc7,0x00,0x18,
+0x27,0x83,0x8f,0xf0,0x00,0x43,0x10,0x21,0x8c,0xe3,0x00,0x04,0x84,0x46,0x00,0x06,
+0x00,0x03,0x19,0x42,0x0c,0x00,0x08,0xdf,0x30,0x73,0x00,0x01,0x00,0x40,0x88,0x21,
+0x02,0x40,0x20,0x21,0x02,0x80,0x28,0x21,0x16,0xe0,0x00,0x10,0x02,0x00,0x30,0x21,
+0x86,0xc2,0x00,0x0c,0x00,0x00,0x00,0x00,0x00,0x02,0x18,0xc0,0x00,0x62,0x18,0x21,
+0x00,0x03,0x18,0x80,0x27,0x82,0x8f,0xf8,0x00,0x62,0x18,0x21,0xa4,0x71,0x00,0x04,
+0x7b,0xbe,0x01,0xfc,0x7b,0xb6,0x01,0xbc,0x7b,0xb4,0x01,0x7c,0x7b,0xb2,0x01,0x3c,
+0x7b,0xb0,0x00,0xfc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x40,0x86,0xc3,0x00,0x0c,
+0xaf,0xb3,0x00,0x10,0xaf,0xa0,0x00,0x14,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,
+0x00,0x02,0x10,0x80,0x00,0x55,0x10,0x21,0x80,0x47,0x00,0x06,0x00,0x00,0x00,0x00,
+0x24,0xe7,0x00,0x02,0x00,0x07,0x17,0xc2,0x00,0xe2,0x38,0x21,0x00,0x07,0x38,0x43,
+0x00,0x07,0x38,0x40,0x0c,0x00,0x09,0x06,0x03,0xc7,0x38,0x21,0x08,0x00,0x10,0x44,
+0x02,0x22,0x88,0x21,0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,0x27,0xbd,0xff,0xd0,
+0x34,0x63,0x00,0x20,0x24,0x42,0x41,0x94,0xaf,0xb2,0x00,0x20,0xac,0x62,0x00,0x00,
+0xaf,0xbf,0x00,0x28,0xaf,0xb3,0x00,0x24,0xaf,0xb1,0x00,0x1c,0xaf,0xb0,0x00,0x18,
+0x3c,0x02,0xb0,0x03,0x90,0x83,0x00,0x0a,0x34,0x42,0x01,0x04,0x94,0x45,0x00,0x00,
+0x00,0x03,0x18,0x80,0x27,0x82,0xb3,0xf0,0x00,0x62,0x18,0x21,0x30,0xa6,0xff,0xff,
+0x8c,0x71,0x00,0x00,0x80,0x85,0x00,0x12,0x30,0xc9,0x00,0xff,0x00,0x06,0x32,0x02,
+0xa4,0x86,0x00,0x44,0xa4,0x89,0x00,0x46,0x82,0x22,0x00,0x12,0x00,0x80,0x90,0x21,
+0x10,0xa0,0x00,0x1b,0xa0,0x80,0x00,0x15,0x00,0xc5,0x10,0x2a,0x10,0x40,0x00,0x14,
+0x00,0x00,0x00,0x00,0xa2,0x20,0x00,0x19,0x84,0x83,0x00,0x0c,0x00,0x00,0x00,0x00,
+0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x80,0x27,0x83,0x90,0x10,
+0x00,0x43,0x10,0x21,0xa0,0x40,0x00,0x00,0xa0,0x80,0x00,0x12,0x92,0x22,0x00,0x16,
+0x00,0x00,0x00,0x00,0x30,0x42,0x00,0xdf,0xa2,0x22,0x00,0x16,0x8f,0xbf,0x00,0x28,
+0x7b,0xb2,0x01,0x3c,0x7b,0xb0,0x00,0xfc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x30,
+0x0c,0x00,0x0f,0xfd,0x00,0x00,0x00,0x00,0x08,0x00,0x10,0x93,0x00,0x00,0x00,0x00,
+0x28,0x42,0x00,0x02,0x10,0x40,0x01,0x76,0x00,0x00,0x28,0x21,0x94,0x87,0x00,0x0c,
+0x00,0x00,0x00,0x00,0x00,0xe0,0x10,0x21,0x00,0x02,0x14,0x00,0x00,0x02,0x14,0x03,
+0x00,0x07,0x24,0x00,0x00,0x04,0x24,0x03,0x00,0x02,0x18,0xc0,0x00,0x62,0x18,0x21,
+0x00,0x04,0x28,0xc0,0x00,0xa4,0x28,0x21,0x27,0x82,0x90,0x10,0x00,0x03,0x18,0x80,
+0x00,0x62,0x18,0x21,0x00,0x05,0x28,0x80,0x27,0x82,0x8f,0xf8,0x00,0xa2,0x10,0x21,
+0x8c,0x68,0x00,0x00,0x80,0x44,0x00,0x06,0x27,0x82,0x90,0x00,0x00,0x08,0x1d,0x02,
+0x00,0xa2,0x28,0x21,0x38,0x84,0x00,0x00,0x30,0x63,0x00,0x01,0x01,0x24,0x30,0x0b,
+0x80,0xaa,0x00,0x04,0x80,0xa9,0x00,0x05,0x10,0x60,0x00,0x02,0x00,0x08,0x14,0x02,
+0x30,0x46,0x00,0x0f,0x15,0x20,0x00,0x28,0x01,0x49,0x10,0x21,0x15,0x40,0x00,0x11,
+0x30,0xe3,0xff,0xff,0x92,0x45,0x00,0x08,0x00,0x00,0x00,0x00,0x30,0xa8,0x00,0xff,
+0x2d,0x02,0x00,0x04,0x10,0x40,0x01,0x46,0x2d,0x02,0x00,0x10,0x3c,0x04,0xb0,0x05,
+0x34,0x84,0x02,0x29,0x90,0x83,0x00,0x00,0x24,0x02,0x00,0x01,0x01,0x02,0x10,0x04,
+0x00,0x62,0x18,0x25,0xa0,0x83,0x00,0x00,0x96,0x47,0x00,0x0c,0x00,0x00,0x00,0x00,
+0x30,0xe3,0xff,0xff,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,0x27,0x84,0x90,0x00,
+0x00,0x02,0x10,0x80,0x00,0x44,0x10,0x21,0x80,0x45,0x00,0x06,0x00,0x03,0x1a,0x00,
+0x3c,0x04,0xb0,0x00,0x00,0x65,0x18,0x21,0x00,0x64,0x20,0x21,0x94,0x82,0x00,0x00,
+0x82,0x43,0x00,0x10,0x00,0x02,0x14,0x00,0x14,0x60,0x00,0x06,0x00,0x02,0x3c,0x03,
+0x30,0xe2,0x00,0x04,0x14,0x40,0x00,0x04,0x01,0x49,0x10,0x21,0x34,0xe2,0x08,0x00,
+0xa4,0x82,0x00,0x00,0x01,0x49,0x10,0x21,0x00,0x02,0x16,0x00,0x00,0x02,0x16,0x03,
+0x00,0x46,0x10,0x2a,0x10,0x40,0x00,0x7c,0x00,0x00,0x00,0x00,0x82,0x42,0x00,0x10,
+0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x0e,0x00,0x00,0x00,0x00,0x86,0x43,0x00,0x0c,
+0x25,0x44,0x00,0x01,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x80,
+0x27,0x83,0x90,0x00,0x00,0x43,0x10,0x21,0xa0,0x44,0x00,0x04,0x92,0x23,0x00,0x16,
+0x02,0x40,0x20,0x21,0x30,0x63,0x00,0xfb,0x08,0x00,0x10,0x98,0xa2,0x23,0x00,0x16,
+0x86,0x43,0x00,0x0c,0x25,0x24,0x00,0x01,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,
+0x00,0x02,0x10,0x80,0x27,0x83,0x90,0x00,0x00,0x43,0x10,0x21,0xa0,0x44,0x00,0x05,
+0x86,0x45,0x00,0x0c,0x0c,0x00,0x1f,0x08,0x02,0x20,0x20,0x21,0x10,0x40,0x00,0x5a,
+0x00,0x00,0x00,0x00,0x92,0x45,0x00,0x08,0x00,0x00,0x00,0x00,0x30,0xa6,0x00,0xff,
+0x2c,0xc2,0x00,0x04,0x10,0x40,0x00,0x4c,0x2c,0xc2,0x00,0x10,0x3c,0x04,0xb0,0x05,
+0x34,0x84,0x02,0x29,0x90,0x83,0x00,0x00,0x24,0x02,0x00,0x01,0x00,0xc2,0x10,0x04,
+0x00,0x02,0x10,0x27,0x00,0x62,0x18,0x24,0xa0,0x83,0x00,0x00,0x92,0x45,0x00,0x08,
+0x00,0x00,0x00,0x00,0x30,0xa5,0x00,0xff,0x14,0xa0,0x00,0x33,0x24,0x02,0x00,0x01,
+0xa2,0x40,0x00,0x04,0x92,0x22,0x00,0x04,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x0c,
+0x24,0x02,0x00,0x01,0xa2,0x22,0x00,0x17,0x92,0x22,0x00,0x17,0x00,0x00,0x00,0x00,
+0x10,0x40,0x00,0x04,0x00,0x00,0x00,0x00,0x96,0x22,0x00,0x06,0x08,0x00,0x10,0x93,
+0xa6,0x22,0x00,0x14,0x96,0x22,0x00,0x00,0x08,0x00,0x10,0x93,0xa6,0x22,0x00,0x14,
+0x92,0x22,0x00,0x0a,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x03,0x00,0x00,0x00,0x00,
+0x08,0x00,0x11,0x22,0xa2,0x20,0x00,0x17,0x96,0x24,0x00,0x00,0x96,0x25,0x00,0x06,
+0x27,0x86,0x8f,0xf0,0x00,0x04,0x18,0xc0,0x00,0x64,0x18,0x21,0x00,0x05,0x10,0xc0,
+0x00,0x45,0x10,0x21,0x00,0x03,0x18,0x80,0x00,0x66,0x18,0x21,0x00,0x02,0x10,0x80,
+0x00,0x46,0x10,0x21,0x8c,0x65,0x00,0x08,0x8c,0x44,0x00,0x08,0x3c,0x03,0x80,0x00,
+0x00,0xa3,0x30,0x24,0x10,0xc0,0x00,0x08,0x00,0x83,0x10,0x24,0x10,0x40,0x00,0x04,
+0x00,0x00,0x18,0x21,0x10,0xc0,0x00,0x02,0x24,0x03,0x00,0x01,0x00,0x85,0x18,0x2b,
+0x08,0x00,0x11,0x22,0xa2,0x23,0x00,0x17,0x10,0x40,0xff,0xfd,0x00,0x85,0x18,0x2b,
+0x08,0x00,0x11,0x45,0x00,0x00,0x00,0x00,0x10,0xa2,0x00,0x09,0x24,0x02,0x00,0x02,
+0x10,0xa2,0x00,0x05,0x24,0x02,0x00,0x03,0x14,0xa2,0xff,0xca,0x00,0x00,0x00,0x00,
+0x08,0x00,0x11,0x1d,0xa2,0x40,0x00,0x07,0x08,0x00,0x11,0x1d,0xa2,0x40,0x00,0x06,
+0x08,0x00,0x11,0x1d,0xa2,0x40,0x00,0x05,0x14,0x40,0xff,0xbe,0x3c,0x04,0xb0,0x05,
+0x34,0x84,0x02,0x29,0x90,0x83,0x00,0x00,0x30,0xa5,0x00,0x0f,0x24,0x02,0x00,0x80,
+0x08,0x00,0x11,0x14,0x00,0xa2,0x10,0x07,0x0c,0x00,0x10,0x03,0x02,0x40,0x20,0x21,
+0x08,0x00,0x10,0x93,0x00,0x00,0x00,0x00,0x92,0x45,0x00,0x08,0x00,0x00,0x00,0x00,
+0x30,0xa6,0x00,0xff,0x2c,0xc2,0x00,0x04,0x10,0x40,0x00,0x99,0x2c,0xc2,0x00,0x10,
+0x3c,0x04,0xb0,0x05,0x34,0x84,0x02,0x29,0x90,0x83,0x00,0x00,0x24,0x02,0x00,0x01,
+0x00,0xc2,0x10,0x04,0x00,0x02,0x10,0x27,0x00,0x62,0x18,0x24,0xa0,0x83,0x00,0x00,
+0x92,0x45,0x00,0x08,0x00,0x00,0x00,0x00,0x30,0xa5,0x00,0xff,0x14,0xa0,0x00,0x80,
+0x24,0x02,0x00,0x01,0xa2,0x40,0x00,0x04,0x86,0x43,0x00,0x0c,0x27,0x93,0x8f,0xf4,
+0x96,0x47,0x00,0x0c,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,0x00,0x02,0x28,0x80,
+0x00,0xb3,0x18,0x21,0x8c,0x64,0x00,0x18,0x00,0x00,0x00,0x00,0x8c,0x82,0x00,0x04,
+0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x10,0x10,0x40,0x00,0x64,0x00,0x00,0x30,0x21,
+0x00,0x07,0x1c,0x00,0x00,0x03,0x1c,0x03,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,
+0x00,0x02,0x10,0x80,0x00,0x53,0x10,0x21,0x8c,0x43,0x00,0x18,0x93,0x82,0x8b,0x61,
+0x8c,0x64,0x00,0x04,0x30,0x42,0x00,0x01,0x00,0x04,0x21,0x42,0x14,0x40,0x00,0x4d,
+0x30,0x90,0x00,0x01,0x00,0x07,0x2c,0x00,0x00,0x05,0x2c,0x03,0x0c,0x00,0x1b,0x84,
+0x02,0x20,0x20,0x21,0x96,0x26,0x00,0x06,0x12,0x00,0x00,0x14,0x30,0xc5,0xff,0xff,
+0x02,0x60,0x90,0x21,0x00,0x05,0x10,0xc0,0x00,0x45,0x10,0x21,0x00,0x02,0x10,0x80,
+0x00,0x52,0x18,0x21,0x92,0x22,0x00,0x0a,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x0b,
+0x02,0x20,0x20,0x21,0x8c,0x63,0x00,0x18,0x00,0x00,0x00,0x00,0x8c,0x62,0x00,0x04,
+0x00,0x00,0x00,0x00,0x00,0x02,0x11,0x42,0x0c,0x00,0x1b,0x84,0x30,0x50,0x00,0x01,
+0x96,0x26,0x00,0x06,0x16,0x00,0xff,0xef,0x30,0xc5,0xff,0xff,0x92,0x22,0x00,0x04,
+0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x0d,0x24,0x02,0x00,0x01,0xa2,0x22,0x00,0x17,
+0x92,0x22,0x00,0x17,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x05,0x00,0x00,0x00,0x00,
+0xa6,0x26,0x00,0x14,0x92,0x22,0x00,0x16,0x08,0x00,0x10,0x92,0x30,0x42,0x00,0xc3,
+0x96,0x22,0x00,0x00,0x08,0x00,0x11,0xb9,0xa6,0x22,0x00,0x14,0x92,0x22,0x00,0x0a,
+0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x03,0x00,0x00,0x00,0x00,0x08,0x00,0x11,0xb4,
+0xa2,0x20,0x00,0x17,0x96,0x24,0x00,0x00,0x30,0xc5,0xff,0xff,0x00,0x05,0x18,0xc0,
+0x00,0x04,0x10,0xc0,0x00,0x44,0x10,0x21,0x00,0x65,0x18,0x21,0x27,0x84,0x8f,0xf0,
+0x00,0x02,0x10,0x80,0x00,0x44,0x10,0x21,0x00,0x03,0x18,0x80,0x8c,0x45,0x00,0x08,
+0x00,0x64,0x18,0x21,0x8c,0x64,0x00,0x08,0x3c,0x02,0x80,0x00,0x00,0xa2,0x38,0x24,
+0x10,0xe0,0x00,0x08,0x00,0x82,0x10,0x24,0x10,0x40,0x00,0x04,0x00,0x00,0x18,0x21,
+0x10,0xe0,0x00,0x02,0x24,0x03,0x00,0x01,0x00,0x85,0x18,0x2b,0x08,0x00,0x11,0xb4,
+0xa2,0x23,0x00,0x17,0x10,0x40,0xff,0xfd,0x00,0x85,0x18,0x2b,0x08,0x00,0x11,0xd8,
+0x00,0x00,0x00,0x00,0x24,0x05,0x00,0x24,0xf0,0xe5,0x00,0x06,0x00,0x00,0x28,0x12,
+0x27,0x82,0x8f,0xf0,0x00,0xa2,0x28,0x21,0x0c,0x00,0x01,0x4b,0x00,0x00,0x20,0x21,
+0x96,0x47,0x00,0x0c,0x08,0x00,0x11,0x96,0x00,0x07,0x2c,0x00,0x27,0x83,0x90,0x00,
+0x27,0x82,0x90,0x08,0x00,0xa2,0x10,0x21,0x00,0xa3,0x18,0x21,0x90,0x44,0x00,0x00,
+0x90,0x65,0x00,0x05,0x93,0x82,0x80,0x10,0x24,0x07,0x00,0x01,0x0c,0x00,0x21,0xf5,
+0xaf,0xa2,0x00,0x10,0x96,0x47,0x00,0x0c,0x08,0x00,0x11,0x89,0x00,0x07,0x1c,0x00,
+0x10,0xa2,0x00,0x09,0x24,0x02,0x00,0x02,0x10,0xa2,0x00,0x05,0x24,0x02,0x00,0x03,
+0x14,0xa2,0xff,0x7d,0x00,0x00,0x00,0x00,0x08,0x00,0x11,0x7a,0xa2,0x40,0x00,0x07,
+0x08,0x00,0x11,0x7a,0xa2,0x40,0x00,0x06,0x08,0x00,0x11,0x7a,0xa2,0x40,0x00,0x05,
+0x14,0x40,0xff,0x71,0x3c,0x04,0xb0,0x05,0x34,0x84,0x02,0x29,0x90,0x83,0x00,0x00,
+0x30,0xa5,0x00,0x0f,0x24,0x02,0x00,0x80,0x08,0x00,0x11,0x71,0x00,0xa2,0x10,0x07,
+0x14,0x40,0xfe,0xc3,0x3c,0x04,0xb0,0x05,0x34,0x84,0x02,0x29,0x90,0x83,0x00,0x00,
+0x30,0xa5,0x00,0x0f,0x24,0x02,0x00,0x80,0x08,0x00,0x10,0xcc,0x00,0xa2,0x10,0x07,
+0x84,0x83,0x00,0x0c,0x00,0x00,0x00,0x00,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,
+0x00,0x02,0x10,0x80,0x27,0x83,0x8f,0xf4,0x00,0x43,0x10,0x21,0x8c,0x47,0x00,0x18,
+0x00,0x00,0x00,0x00,0x8c,0xe6,0x00,0x08,0x0c,0x00,0x0f,0x15,0x00,0x00,0x00,0x00,
+0x02,0x40,0x20,0x21,0x00,0x00,0x28,0x21,0x00,0x00,0x30,0x21,0x00,0x00,0x38,0x21,
+0x0c,0x00,0x1c,0x86,0xaf,0xa2,0x00,0x10,0x00,0x02,0x1e,0x00,0x14,0x60,0xfe,0x6b,
+0xa2,0x22,0x00,0x12,0x92,0x43,0x00,0x08,0x00,0x00,0x00,0x00,0x14,0x60,0x00,0x40,
+0x24,0x02,0x00,0x01,0xa2,0x40,0x00,0x04,0x92,0x28,0x00,0x04,0x00,0x00,0x00,0x00,
+0x15,0x00,0x00,0x19,0x24,0x02,0x00,0x01,0x92,0x27,0x00,0x0a,0xa2,0x22,0x00,0x17,
+0x92,0x22,0x00,0x17,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x10,0x00,0x00,0x00,0x00,
+0x96,0x22,0x00,0x06,0x00,0x00,0x00,0x00,0xa6,0x22,0x00,0x14,0x92,0x22,0x00,0x16,
+0x30,0xe3,0x00,0xff,0x30,0x42,0x00,0xc0,0x10,0x60,0x00,0x03,0xa2,0x22,0x00,0x16,
+0x34,0x42,0x00,0x01,0xa2,0x22,0x00,0x16,0x11,0x00,0xfe,0x50,0x00,0x00,0x00,0x00,
+0x92,0x22,0x00,0x16,0x08,0x00,0x10,0x92,0x34,0x42,0x00,0x02,0x96,0x22,0x00,0x00,
+0x08,0x00,0x12,0x3b,0xa6,0x22,0x00,0x14,0x92,0x27,0x00,0x0a,0x00,0x00,0x00,0x00,
+0x14,0xe0,0x00,0x03,0x00,0x00,0x00,0x00,0x08,0x00,0x12,0x34,0xa2,0x20,0x00,0x17,
+0x96,0x24,0x00,0x00,0x96,0x25,0x00,0x06,0x27,0x86,0x8f,0xf0,0x00,0x04,0x18,0xc0,
+0x00,0x64,0x18,0x21,0x00,0x05,0x10,0xc0,0x00,0x45,0x10,0x21,0x00,0x03,0x18,0x80,
+0x00,0x66,0x18,0x21,0x00,0x02,0x10,0x80,0x00,0x46,0x10,0x21,0x8c,0x65,0x00,0x08,
+0x8c,0x44,0x00,0x08,0x3c,0x03,0x80,0x00,0x00,0xa3,0x30,0x24,0x10,0xc0,0x00,0x08,
+0x00,0x83,0x10,0x24,0x10,0x40,0x00,0x04,0x00,0x00,0x18,0x21,0x10,0xc0,0x00,0x02,
+0x24,0x03,0x00,0x01,0x00,0x85,0x18,0x2b,0x08,0x00,0x12,0x34,0xa2,0x23,0x00,0x17,
+0x10,0x40,0xff,0xfd,0x00,0x85,0x18,0x2b,0x08,0x00,0x12,0x63,0x00,0x00,0x00,0x00,
+0x10,0x62,0x00,0x09,0x24,0x02,0x00,0x02,0x10,0x62,0x00,0x05,0x24,0x02,0x00,0x03,
+0x14,0x62,0xff,0xbd,0x00,0x00,0x00,0x00,0x08,0x00,0x12,0x2e,0xa2,0x40,0x00,0x07,
+0x08,0x00,0x12,0x2e,0xa2,0x40,0x00,0x06,0x08,0x00,0x12,0x2e,0xa2,0x40,0x00,0x05,
+0x3c,0x02,0x80,0x00,0x00,0x82,0x30,0x24,0x10,0xc0,0x00,0x08,0x00,0xa2,0x18,0x24,
+0x10,0x60,0x00,0x04,0x00,0x00,0x10,0x21,0x10,0xc0,0x00,0x02,0x24,0x02,0x00,0x01,
+0x00,0xa4,0x10,0x2b,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x10,0x60,0xff,0xfd,
+0x00,0xa4,0x10,0x2b,0x08,0x00,0x12,0x7e,0x00,0x00,0x00,0x00,0x30,0x82,0xff,0xff,
+0x00,0x02,0x18,0xc0,0x00,0x62,0x18,0x21,0x27,0x84,0x90,0x00,0x00,0x03,0x18,0x80,
+0x00,0x64,0x18,0x21,0x80,0x66,0x00,0x06,0x00,0x02,0x12,0x00,0x3c,0x03,0xb0,0x00,
+0x00,0x46,0x10,0x21,0x00,0x45,0x10,0x21,0x03,0xe0,0x00,0x08,0x00,0x43,0x10,0x21,
+0x27,0xbd,0xff,0xe0,0x30,0x82,0x00,0x7c,0x30,0x84,0xff,0x00,0xaf,0xbf,0x00,0x1c,
+0xaf,0xb2,0x00,0x18,0xaf,0xb1,0x00,0x14,0xaf,0xb0,0x00,0x10,0x14,0x40,0x00,0x41,
+0x00,0x04,0x22,0x03,0x24,0x02,0x00,0x04,0x3c,0x10,0xb0,0x03,0x8e,0x10,0x00,0x00,
+0x10,0x82,0x00,0x32,0x24,0x02,0x00,0x08,0x10,0x82,0x00,0x03,0x32,0x02,0x00,0x20,
+0x08,0x00,0x12,0xa4,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x17,0x3c,0x02,0xb0,0x06,
+0x34,0x42,0x80,0x24,0x8c,0x43,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x67,0x00,0xff,
+0x10,0xe0,0x00,0x23,0x00,0x00,0x88,0x21,0x8f,0x85,0x8f,0xd0,0x00,0x40,0x30,0x21,
+0x94,0xa2,0x00,0x08,0x8c,0xc3,0x00,0x00,0x26,0x31,0x00,0x01,0x24,0x42,0x00,0x02,
+0x30,0x42,0x01,0xff,0x34,0x63,0x01,0x00,0x02,0x27,0x20,0x2a,0xa4,0xa2,0x00,0x08,
+0x14,0x80,0xff,0xf7,0xac,0xc3,0x00,0x00,0x84,0xa3,0x00,0x08,0x3c,0x02,0xb0,0x03,
+0x34,0x42,0x00,0x30,0xac,0x43,0x00,0x00,0x27,0x92,0xb3,0xf0,0x24,0x11,0x00,0x12,
+0x8e,0x44,0x00,0x00,0x26,0x31,0xff,0xff,0x90,0x82,0x00,0x10,0x00,0x00,0x00,0x00,
+0x10,0x40,0x00,0x03,0x26,0x52,0x00,0x04,0x0c,0x00,0x20,0xd0,0x00,0x00,0x00,0x00,
+0x06,0x21,0xff,0xf7,0x24,0x02,0xff,0xdf,0x02,0x02,0x80,0x24,0x3c,0x01,0xb0,0x03,
+0x0c,0x00,0x13,0x18,0xac,0x30,0x00,0x00,0x08,0x00,0x12,0xa4,0x00,0x00,0x00,0x00,
+0x8f,0x85,0x8f,0xd0,0x08,0x00,0x12,0xba,0x00,0x00,0x00,0x00,0x24,0x02,0xff,0x95,
+0x3c,0x03,0xb0,0x03,0x02,0x02,0x80,0x24,0x34,0x63,0x00,0x30,0x3c,0x01,0xb0,0x03,
+0xac,0x30,0x00,0x00,0x0c,0x00,0x12,0xe1,0xac,0x60,0x00,0x00,0x08,0x00,0x12,0xa4,
+0x00,0x00,0x00,0x00,0x3c,0x02,0xb0,0x03,0x34,0x42,0x00,0x50,0x08,0x00,0x12,0xa4,
+0xac,0x46,0x00,0x00,0x3c,0x0a,0x80,0x00,0x25,0x4a,0x4b,0x84,0x3c,0x0b,0xb0,0x03,
+0xad,0x6a,0x00,0x20,0x3c,0x08,0x80,0x01,0x25,0x08,0x00,0x00,0x3c,0x09,0x80,0x01,
+0x25,0x29,0x03,0x1c,0x11,0x09,0x00,0x10,0x00,0x00,0x00,0x00,0x3c,0x0a,0x80,0x00,
+0x25,0x4a,0x4b,0xac,0x3c,0x0b,0xb0,0x03,0xad,0x6a,0x00,0x20,0x3c,0x08,0xb0,0x06,
+0x35,0x08,0x80,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x8d,0x09,0x00,0x00,
+0x00,0x00,0x00,0x00,0x31,0x29,0x00,0x01,0x00,0x00,0x00,0x00,0x24,0x01,0x00,0x01,
+0x15,0x21,0xff,0xf2,0x00,0x00,0x00,0x00,0x3c,0x0a,0x80,0x00,0x25,0x4a,0x4b,0xe8,
+0x3c,0x0b,0xb0,0x03,0xad,0x6a,0x00,0x20,0x3c,0x02,0xb0,0x03,0x8c,0x43,0x00,0x00,
+0x00,0x00,0x00,0x00,0x34,0x63,0x00,0x40,0x00,0x00,0x00,0x00,0xac,0x43,0x00,0x00,
+0x00,0x00,0x00,0x00,0x3c,0x0a,0x80,0x00,0x25,0x4a,0x4c,0x14,0x3c,0x0b,0xb0,0x03,
+0xad,0x6a,0x00,0x20,0x3c,0x02,0x80,0x01,0x24,0x42,0x00,0x00,0x3c,0x03,0x80,0x01,
+0x24,0x63,0x03,0x1c,0x3c,0x04,0xb0,0x00,0x8c,0x85,0x00,0x00,0x00,0x00,0x00,0x00,
+0xac,0x45,0x00,0x00,0x24,0x42,0x00,0x04,0x24,0x84,0x00,0x04,0x00,0x43,0x08,0x2a,
+0x14,0x20,0xff,0xf9,0x00,0x00,0x00,0x00,0x0c,0x00,0x13,0x18,0x00,0x00,0x00,0x00,
+0x3c,0x0a,0x80,0x00,0x25,0x4a,0x4c,0x60,0x3c,0x0b,0xb0,0x03,0xad,0x6a,0x00,0x20,
+0x3c,0x02,0x80,0x01,0x24,0x42,0x03,0x20,0x3c,0x03,0x80,0x01,0x24,0x63,0x3f,0x14,
+0xac,0x40,0x00,0x00,0xac,0x40,0x00,0x04,0xac,0x40,0x00,0x08,0xac,0x40,0x00,0x0c,
+0x24,0x42,0x00,0x10,0x00,0x43,0x08,0x2a,0x14,0x20,0xff,0xf9,0x00,0x00,0x00,0x00,
+0x3c,0x0a,0x80,0x00,0x25,0x4a,0x4c,0xa0,0x3c,0x0b,0xb0,0x03,0xad,0x6a,0x00,0x20,
+0x3c,0x1c,0x80,0x01,0x27,0x9c,0x7f,0xf0,0x27,0x9d,0x8b,0xd0,0x00,0x00,0x00,0x00,
+0x27,0x9d,0x8f,0xb8,0x3c,0x0a,0x80,0x00,0x25,0x4a,0x4c,0xc4,0x3c,0x0b,0xb0,0x03,
+0xad,0x6a,0x00,0x20,0x40,0x80,0x68,0x00,0x40,0x08,0x60,0x00,0x00,0x00,0x00,0x00,
+0x35,0x08,0xff,0x01,0x40,0x88,0x60,0x00,0x00,0x00,0x00,0x00,0x0c,0x00,0x15,0x65,
+0x00,0x00,0x00,0x00,0x24,0x84,0xf8,0x00,0x30,0x87,0x00,0x03,0x00,0x04,0x30,0x40,
+0x00,0xc7,0x20,0x23,0x3c,0x02,0xb0,0x0a,0x27,0xbd,0xff,0xe0,0x24,0x03,0xff,0xff,
+0x00,0x82,0x20,0x21,0xaf,0xb1,0x00,0x14,0xac,0x83,0x10,0x00,0xaf,0xbf,0x00,0x18,
+0xaf,0xb0,0x00,0x10,0x00,0xa0,0x88,0x21,0x24,0x03,0x00,0x01,0x8c,0x82,0x10,0x00,
+0x00,0x00,0x00,0x00,0x14,0x43,0xff,0xfd,0x00,0xc7,0x10,0x23,0x3c,0x03,0xb0,0x0a,
+0x00,0x43,0x10,0x21,0x8c,0x50,0x00,0x00,0x0c,0x00,0x13,0x95,0x02,0x20,0x20,0x21,
+0x02,0x11,0x80,0x24,0x00,0x50,0x80,0x06,0x02,0x00,0x10,0x21,0x8f,0xbf,0x00,0x18,
+0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x20,0x27,0xbd,0xff,0xd8,
+0xaf,0xb2,0x00,0x18,0x00,0xa0,0x90,0x21,0x24,0x05,0xff,0xff,0xaf,0xb3,0x00,0x1c,
+0xaf,0xbf,0x00,0x20,0xaf,0xb1,0x00,0x14,0xaf,0xb0,0x00,0x10,0x00,0xc0,0x98,0x21,
+0x12,0x45,0x00,0x23,0x24,0x84,0xf8,0x00,0x30,0x83,0x00,0x03,0x00,0x04,0x10,0x40,
+0x00,0x40,0x88,0x21,0x00,0x60,0x20,0x21,0x00,0x43,0x10,0x23,0x3c,0x03,0xb0,0x0a,
+0x00,0x43,0x10,0x21,0xac,0x45,0x10,0x00,0x00,0x40,0x18,0x21,0x24,0x05,0x00,0x01,
+0x8c,0x62,0x10,0x00,0x00,0x00,0x00,0x00,0x14,0x45,0xff,0xfd,0x3c,0x02,0xb0,0x0a,
+0x02,0x24,0x88,0x23,0x02,0x22,0x88,0x21,0x8e,0x30,0x00,0x00,0x0c,0x00,0x13,0x95,
+0x02,0x40,0x20,0x21,0x00,0x12,0x18,0x27,0x02,0x03,0x80,0x24,0x00,0x53,0x10,0x04,
+0x02,0x02,0x80,0x25,0xae,0x30,0x00,0x00,0x24,0x03,0x00,0x01,0x8e,0x22,0x10,0x00,
+0x00,0x00,0x00,0x00,0x14,0x43,0xff,0xfd,0x00,0x00,0x00,0x00,0x8f,0xbf,0x00,0x20,
+0x7b,0xb2,0x00,0xfc,0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x28,
+0x30,0x82,0x00,0x03,0x00,0x04,0x18,0x40,0x00,0x62,0x18,0x23,0x3c,0x04,0xb0,0x0a,
+0x00,0x64,0x18,0x21,0xac,0x66,0x00,0x00,0x24,0x04,0x00,0x01,0x8c,0x62,0x10,0x00,
+0x00,0x00,0x00,0x00,0x14,0x44,0xff,0xfd,0x00,0x00,0x00,0x00,0x08,0x00,0x13,0x83,
+0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x21,0x00,0x64,0x10,0x06,0x30,0x42,0x00,0x01,
+0x14,0x40,0x00,0x05,0x00,0x00,0x00,0x00,0x24,0x63,0x00,0x01,0x2c,0x62,0x00,0x20,
+0x14,0x40,0xff,0xf9,0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,0x00,0x60,0x10,0x21,
+0x27,0xbd,0xff,0xe0,0x3c,0x03,0xb0,0x05,0xaf,0xb2,0x00,0x18,0xaf,0xb1,0x00,0x14,
+0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x1c,0x00,0x80,0x90,0x21,0x00,0xa0,0x80,0x21,
+0x00,0xc0,0x88,0x21,0x34,0x63,0x02,0x2e,0x90,0x62,0x00,0x00,0x00,0x00,0x00,0x00,
+0x30,0x42,0x00,0x01,0x14,0x40,0xff,0xfc,0x24,0x04,0x08,0x24,0x3c,0x05,0x00,0xc0,
+0x0c,0x00,0x13,0x5b,0x24,0x06,0x00,0x03,0x24,0x04,0x08,0x34,0x3c,0x05,0x00,0xc0,
+0x0c,0x00,0x13,0x5b,0x24,0x06,0x00,0x03,0x3c,0x02,0xc0,0x00,0x00,0x10,0x1c,0x00,
+0x34,0x42,0x04,0x00,0x3c,0x04,0xb0,0x05,0x3c,0x05,0xb0,0x05,0x24,0x63,0x16,0x09,
+0x02,0x22,0x10,0x21,0x34,0x84,0x04,0x20,0x34,0xa5,0x04,0x24,0x3c,0x06,0xb0,0x05,
+0xac,0x83,0x00,0x00,0x24,0x07,0x00,0x01,0xac,0xa2,0x00,0x00,0x34,0xc6,0x02,0x28,
+0x24,0x02,0x00,0x20,0xae,0x47,0x00,0x3c,0x24,0x04,0x08,0x24,0xa0,0xc2,0x00,0x00,
+0x3c,0x05,0x00,0xc0,0xa2,0x47,0x00,0x11,0x0c,0x00,0x13,0x5b,0x24,0x06,0x00,0x01,
+0x24,0x04,0x08,0x34,0x3c,0x05,0x00,0xc0,0x0c,0x00,0x13,0x5b,0x24,0x06,0x00,0x01,
+0x8f,0xbf,0x00,0x1c,0x8f,0xb2,0x00,0x18,0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x20,0x24,0x02,0x00,0x06,0xac,0x82,0x00,0x0c,0xa0,0x80,0x00,0x50,
+0xac,0x80,0x00,0x00,0xac,0x80,0x00,0x04,0xac,0x80,0x00,0x08,0xac,0x80,0x00,0x14,
+0xac,0x80,0x00,0x18,0xac,0x80,0x00,0x1c,0xa4,0x80,0x00,0x20,0xac,0x80,0x00,0x24,
+0xac,0x80,0x00,0x28,0xac,0x80,0x00,0x2c,0xa0,0x80,0x00,0x30,0xa0,0x80,0x00,0x31,
+0xac,0x80,0x00,0x34,0xac,0x80,0x00,0x38,0xa0,0x80,0x00,0x3c,0xac,0x82,0x00,0x10,
+0xa0,0x80,0x00,0x44,0xac,0x80,0x00,0x48,0x03,0xe0,0x00,0x08,0xac,0x80,0x00,0x4c,
+0x3c,0x04,0xb0,0x06,0x34,0x84,0x80,0x00,0x8c,0x83,0x00,0x00,0x3c,0x02,0x12,0x00,
+0x3c,0x05,0xb0,0x03,0x00,0x62,0x18,0x25,0x34,0xa5,0x00,0x8b,0x24,0x02,0xff,0x80,
+0xac,0x83,0x00,0x00,0x03,0xe0,0x00,0x08,0xa0,0xa2,0x00,0x00,0x3c,0x04,0xb0,0x03,
+0x34,0x84,0x00,0x0b,0x24,0x02,0x00,0x22,0x3c,0x05,0xb0,0x01,0x3c,0x06,0x45,0x67,
+0x3c,0x0a,0xb0,0x09,0xa0,0x82,0x00,0x00,0x34,0xa5,0x00,0x04,0x34,0xc6,0x89,0xaa,
+0x35,0x4a,0x00,0x04,0x24,0x02,0x01,0x23,0x3c,0x0b,0xb0,0x09,0x3c,0x07,0x01,0x23,
+0x3c,0x0c,0xb0,0x09,0x3c,0x01,0xb0,0x01,0xac,0x20,0x00,0x00,0x27,0xbd,0xff,0xe0,
+0xac,0xa0,0x00,0x00,0x35,0x6b,0x00,0x08,0x3c,0x01,0xb0,0x09,0xac,0x26,0x00,0x00,
+0x34,0xe7,0x45,0x66,0xa5,0x42,0x00,0x00,0x35,0x8c,0x00,0x0c,0x24,0x02,0xcd,0xef,
+0x3c,0x0d,0xb0,0x09,0x3c,0x08,0xcd,0xef,0x3c,0x0e,0xb0,0x09,0xad,0x67,0x00,0x00,
+0xaf,0xb7,0x00,0x1c,0xa5,0x82,0x00,0x00,0xaf,0xb6,0x00,0x18,0xaf,0xb5,0x00,0x14,
+0xaf,0xb4,0x00,0x10,0xaf,0xb3,0x00,0x0c,0xaf,0xb2,0x00,0x08,0xaf,0xb1,0x00,0x04,
+0xaf,0xb0,0x00,0x00,0x35,0xad,0x00,0x10,0x35,0x08,0x01,0x22,0x35,0xce,0x00,0x14,
+0x24,0x02,0x89,0xab,0x3c,0x0f,0xb0,0x09,0x3c,0x09,0x89,0xab,0x3c,0x10,0xb0,0x09,
+0x3c,0x11,0xb0,0x09,0x3c,0x12,0xb0,0x09,0x3c,0x13,0xb0,0x09,0x3c,0x14,0xb0,0x09,
+0x3c,0x15,0xb0,0x09,0x3c,0x16,0xb0,0x09,0x3c,0x17,0xb0,0x09,0xad,0xa8,0x00,0x00,
+0x24,0x03,0xff,0xff,0xa5,0xc2,0x00,0x00,0x35,0xef,0x00,0x18,0x35,0x29,0xcd,0xee,
+0x36,0x10,0x00,0x1c,0x36,0x31,0x00,0x20,0x36,0x52,0x00,0x24,0x36,0x73,0x00,0x28,
+0x36,0x94,0x00,0x2c,0x36,0xb5,0x00,0x30,0x36,0xd6,0x00,0x34,0x36,0xf7,0x00,0x38,
+0x24,0x02,0x45,0x67,0xad,0xe9,0x00,0x00,0xa6,0x02,0x00,0x00,0xae,0x23,0x00,0x00,
+0x8f,0xb0,0x00,0x00,0xa6,0x43,0x00,0x00,0x8f,0xb1,0x00,0x04,0xae,0x63,0x00,0x00,
+0x8f,0xb2,0x00,0x08,0xa6,0x83,0x00,0x00,0x8f,0xb3,0x00,0x0c,0xae,0xa3,0x00,0x00,
+0x8f,0xb4,0x00,0x10,0xa6,0xc3,0x00,0x00,0x8f,0xb5,0x00,0x14,0xae,0xe3,0x00,0x00,
+0x7b,0xb6,0x00,0xfc,0x3c,0x18,0xb0,0x09,0x37,0x18,0x00,0x3c,0xa7,0x03,0x00,0x00,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x20,0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,
+0x34,0x63,0x00,0x20,0x24,0x42,0x51,0x38,0xac,0x62,0x00,0x00,0x8c,0x83,0x00,0x34,
+0x34,0x02,0xff,0xff,0x00,0x43,0x10,0x2a,0x14,0x40,0x01,0x0b,0x00,0x80,0x30,0x21,
+0x8c,0x84,0x00,0x08,0x24,0x02,0x00,0x03,0x10,0x82,0x00,0xfe,0x00,0x00,0x00,0x00,
+0x8c,0xc2,0x00,0x2c,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x47,0x24,0x02,0x00,0x06,
+0x3c,0x03,0xb0,0x05,0x34,0x63,0x04,0x50,0x90,0x62,0x00,0x00,0x00,0x00,0x00,0x00,
+0x30,0x42,0x00,0xff,0x14,0x40,0x00,0xe4,0xac,0xc2,0x00,0x2c,0x24,0x02,0x00,0x01,
+0x10,0x82,0x00,0xe3,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x02,0x10,0x82,0x00,0xd1,
+0x00,0x00,0x00,0x00,0x8c,0xc7,0x00,0x04,0x24,0x02,0x00,0x02,0x10,0xe2,0x00,0xc7,
+0x00,0x00,0x00,0x00,0x8c,0xc2,0x00,0x14,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x09,
+0x24,0x02,0x00,0x01,0x3c,0x03,0xb0,0x09,0x34,0x63,0x01,0x60,0x90,0x62,0x00,0x00,
+0x00,0x00,0x00,0x00,0x30,0x42,0x00,0xff,0x10,0x40,0x00,0x05,0xac,0xc2,0x00,0x14,
+0x24,0x02,0x00,0x01,0xac,0xc2,0x00,0x00,0x03,0xe0,0x00,0x08,0xac,0xc0,0x00,0x14,
+0x3c,0x02,0xb0,0x03,0x34,0x42,0x00,0xd0,0x8c,0x43,0x00,0x00,0x00,0x00,0x00,0x00,
+0x04,0x61,0x00,0x16,0x3c,0x03,0xb0,0x05,0x34,0x63,0x02,0x2e,0x90,0x62,0x00,0x00,
+0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x01,0x14,0x40,0x00,0x10,0x3c,0x02,0xb0,0x05,
+0x34,0x42,0x02,0x42,0x90,0x43,0x00,0x00,0x00,0x00,0x00,0x00,0x14,0x60,0x00,0x0b,
+0x00,0x00,0x00,0x00,0x80,0xc2,0x00,0x50,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x07,
+0x00,0x00,0x00,0x00,0x14,0x80,0x00,0x05,0x24,0x02,0x00,0x0e,0x24,0x03,0x00,0x01,
+0xac,0xc2,0x00,0x00,0x03,0xe0,0x00,0x08,0xa0,0xc3,0x00,0x50,0x80,0xc2,0x00,0x31,
+0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x0a,0x3c,0x02,0xb0,0x06,0x34,0x42,0x80,0x18,
+0x8c,0x43,0x00,0x00,0x3c,0x04,0xf0,0x00,0x3c,0x02,0x80,0x00,0x00,0x64,0x18,0x24,
+0x10,0x62,0x00,0x03,0x24,0x02,0x00,0x09,0x03,0xe0,0x00,0x08,0xac,0xc2,0x00,0x00,
+0x8c,0xc2,0x00,0x40,0x00,0x00,0x00,0x00,0x8c,0x43,0x00,0x00,0x00,0x00,0x00,0x00,
+0x10,0x60,0x00,0x09,0x3c,0x03,0xb0,0x03,0x3c,0x02,0xb0,0x05,0x34,0x42,0x02,0x2c,
+0x8c,0x43,0x00,0x00,0x3c,0x04,0x00,0x02,0x00,0x64,0x18,0x24,0x14,0x60,0xff,0xf2,
+0x24,0x02,0x00,0x10,0x3c,0x03,0xb0,0x03,0x34,0x63,0x02,0x01,0x90,0x62,0x00,0x00,
+0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x80,0x10,0x40,0x00,0x0e,0x00,0x00,0x00,0x00,
+0x8c,0xc3,0x00,0x0c,0x00,0x00,0x00,0x00,0xac,0xc3,0x00,0x10,0x3c,0x02,0xb0,0x03,
+0x90,0x42,0x02,0x01,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x0f,0xac,0xc2,0x00,0x0c,
+0x90,0xc3,0x00,0x0f,0x24,0x02,0x00,0x0d,0x3c,0x01,0xb0,0x03,0x08,0x00,0x14,0xa6,
+0xa0,0x23,0x02,0x01,0x3c,0x02,0xb0,0x09,0x34,0x42,0x01,0x80,0x90,0x44,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x04,0x1e,0x00,0x00,0x03,0x1e,0x03,0x10,0x60,0x00,0x15,
+0xa0,0xc4,0x00,0x44,0x24,0x02,0x00,0x01,0x10,0x62,0x00,0x0b,0x24,0x02,0x00,0x02,
+0x10,0x62,0x00,0x03,0x24,0x03,0x00,0x0d,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,
+0x8c,0xc2,0x00,0x0c,0xac,0xc3,0x00,0x00,0x24,0x03,0x00,0x04,0xac,0xc2,0x00,0x10,
+0x03,0xe0,0x00,0x08,0xac,0xc3,0x00,0x0c,0x24,0x02,0x00,0x0d,0xac,0xc2,0x00,0x00,
+0x24,0x03,0x00,0x04,0x24,0x02,0x00,0x06,0xac,0xc3,0x00,0x10,0x03,0xe0,0x00,0x08,
+0xac,0xc2,0x00,0x0c,0x8c,0xc3,0x00,0x38,0x00,0x00,0x00,0x00,0x2c,0x62,0x00,0x06,
+0x10,0x40,0x00,0x2e,0x00,0x03,0x10,0x80,0x3c,0x03,0x80,0x01,0x24,0x63,0x02,0x00,
+0x00,0x43,0x10,0x21,0x8c,0x44,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x08,
+0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x01,0x10,0xe2,0x00,0x06,0x24,0x02,0x00,0x03,
+0x8c,0xa2,0x02,0xbc,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x06,0x3c,0x03,0xb0,0x06,
+0x24,0x02,0x00,0x02,0xac,0xc2,0x00,0x00,0x24,0x02,0x00,0x01,0x03,0xe0,0x00,0x08,
+0xac,0xc2,0x00,0x38,0x34,0x63,0x80,0x24,0x8c,0x62,0x00,0x00,0x00,0x00,0x00,0x00,
+0x30,0x42,0x00,0xff,0x10,0x40,0x00,0x05,0xac,0xc2,0x00,0x18,0x24,0x02,0x00,0x02,
+0xac,0xc2,0x00,0x00,0x08,0x00,0x14,0xfa,0xac,0xc0,0x00,0x18,0x08,0x00,0x14,0xfa,
+0xac,0xc0,0x00,0x00,0x24,0x02,0x00,0x02,0x24,0x03,0x00,0x0b,0xac,0xc2,0x00,0x38,
+0x03,0xe0,0x00,0x08,0xac,0xc3,0x00,0x00,0x24,0x02,0x00,0x01,0x10,0xe2,0x00,0x05,
+0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x0c,0xac,0xc2,0x00,0x00,0x08,0x00,0x14,0xfb,
+0x24,0x02,0x00,0x04,0x08,0x00,0x15,0x12,0x24,0x02,0x00,0x03,0xac,0xc0,0x00,0x38,
+0x03,0xe0,0x00,0x08,0xac,0xc0,0x00,0x00,0x24,0x02,0x00,0x01,0x10,0xe2,0x00,0x05,
+0x24,0x02,0x00,0x03,0x80,0xc2,0x00,0x30,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x08,
+0x24,0x02,0x00,0x04,0xac,0xc2,0x00,0x00,0x93,0x82,0x86,0x3c,0x00,0x00,0x00,0x00,
+0x14,0x40,0xff,0xd6,0x24,0x02,0x00,0x05,0x03,0xe0,0x00,0x08,0xac,0xc0,0x00,0x38,
+0x08,0x00,0x15,0x22,0xac,0xc0,0x00,0x00,0x3c,0x02,0xb0,0x06,0x34,0x42,0x80,0x18,
+0x8c,0x43,0x00,0x00,0x3c,0x04,0xf0,0x00,0x3c,0x02,0x80,0x00,0x00,0x64,0x18,0x24,
+0x10,0x62,0x00,0x03,0x24,0x02,0x00,0x09,0x08,0x00,0x15,0x26,0xac,0xc2,0x00,0x00,
+0x24,0x02,0x00,0x05,0x08,0x00,0x15,0x18,0xac,0xc2,0x00,0x38,0x80,0xc2,0x00,0x30,
+0x00,0x00,0x00,0x00,0x14,0x40,0xff,0x37,0x24,0x02,0x00,0x04,0x08,0x00,0x14,0xa6,
+0x00,0x00,0x00,0x00,0x84,0xc2,0x00,0x20,0x00,0x00,0x00,0x00,0x10,0x40,0xff,0x66,
+0x24,0x02,0x00,0x06,0x3c,0x02,0xb0,0x05,0x34,0x42,0x02,0x2e,0x90,0x43,0x00,0x00,
+0x00,0x00,0x00,0x00,0x30,0x63,0x00,0x01,0x30,0x63,0x00,0xff,0x00,0x60,0x10,0x21,
+0x14,0x40,0xff,0x24,0xa4,0xc3,0x00,0x20,0x08,0x00,0x14,0xa6,0x24,0x02,0x00,0x06,
+0x8c,0xc2,0x00,0x1c,0x00,0x00,0x00,0x00,0x14,0x40,0xff,0x57,0x24,0x02,0x00,0x05,
+0x3c,0x03,0xb0,0x05,0x34,0x63,0x02,0x2c,0x8c,0x62,0x00,0x00,0x00,0x00,0x00,0x00,
+0x30,0x42,0x00,0xff,0x10,0x40,0xff,0x14,0xac,0xc2,0x00,0x1c,0x08,0x00,0x14,0xa6,
+0x24,0x02,0x00,0x05,0x3c,0x02,0xb0,0x05,0x8c,0x42,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x02,0x17,0x42,0x30,0x42,0x00,0x01,0x14,0x40,0xff,0x47,0x24,0x02,0x00,0x06,
+0x08,0x00,0x14,0x5c,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x0a,0x03,0xe0,0x00,0x08,
+0xac,0x82,0x00,0x00,0x27,0xbd,0xff,0xd8,0xaf,0xb0,0x00,0x10,0x27,0x90,0x86,0x48,
+0xaf,0xbf,0x00,0x20,0xaf,0xb3,0x00,0x1c,0xaf,0xb2,0x00,0x18,0x0c,0x00,0x2b,0xe8,
+0xaf,0xb1,0x00,0x14,0xaf,0x90,0x8f,0xd0,0x48,0x02,0x00,0x00,0x0c,0x00,0x13,0xec,
+0x00,0x00,0x00,0x00,0x0c,0x00,0x18,0x4e,0x02,0x00,0x20,0x21,0x0c,0x00,0x00,0x34,
+0x00,0x00,0x00,0x00,0x0c,0x00,0x13,0xf7,0x00,0x00,0x00,0x00,0x27,0x84,0x84,0x68,
+0x0c,0x00,0x27,0xc1,0x00,0x00,0x00,0x00,0x93,0x84,0x80,0x10,0x0c,0x00,0x21,0x9a,
+0x00,0x00,0x00,0x00,0x27,0x84,0x89,0x08,0x0c,0x00,0x06,0xe1,0x00,0x00,0x00,0x00,
+0x0c,0x00,0x01,0x3b,0x00,0x00,0x00,0x00,0x27,0x84,0x84,0x10,0x0c,0x00,0x13,0xd5,
+0x00,0x00,0x00,0x00,0x27,0x82,0x89,0x3c,0xaf,0x82,0x84,0x50,0x0c,0x00,0x00,0x61,
+0x00,0x00,0x00,0x00,0x3c,0x03,0xb0,0x03,0x34,0x63,0x01,0x08,0x3c,0x04,0xb0,0x09,
+0x3c,0x05,0xb0,0x09,0x8c,0x66,0x00,0x00,0x34,0x84,0x01,0x68,0x24,0x02,0xc8,0x80,
+0x34,0xa5,0x01,0x40,0x24,0x03,0x00,0x0a,0xa4,0x82,0x00,0x00,0xa4,0xa3,0x00,0x00,
+0x3c,0x04,0xb0,0x03,0x8c,0x82,0x00,0x00,0x8f,0x87,0x84,0x10,0xaf,0x86,0x84,0x08,
+0x34,0x42,0x00,0x20,0xac,0x82,0x00,0x00,0x3c,0x02,0xb0,0x03,0x34,0x42,0x00,0x58,
+0x8c,0x43,0x00,0x00,0x2c,0xe4,0x00,0x11,0x34,0x63,0x01,0x00,0xac,0x43,0x00,0x00,
+0x10,0x80,0xff,0xfa,0x3c,0x02,0xb0,0x03,0x3c,0x03,0x80,0x01,0x00,0x07,0x10,0x80,
+0x24,0x63,0x02,0x18,0x00,0x43,0x10,0x21,0x8c,0x44,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x80,0x00,0x08,0x00,0x00,0x00,0x00,0x27,0x84,0x84,0x68,0x0c,0x00,0x26,0xe5,
+0x00,0x00,0x00,0x00,0x27,0x84,0x84,0x10,0x27,0x85,0x86,0x48,0x0c,0x00,0x14,0x4e,
+0x00,0x00,0x00,0x00,0x3c,0x02,0xb0,0x09,0x34,0x42,0x00,0x07,0x3c,0x03,0xb0,0x06,
+0x90,0x44,0x00,0x00,0x34,0x63,0x80,0x18,0x8c,0x65,0x00,0x00,0x3c,0x02,0xb0,0x03,
+0x34,0x42,0x00,0xec,0x3c,0x03,0xb0,0x03,0x30,0x86,0x00,0xff,0xa0,0x46,0x00,0x00,
+0x00,0x05,0x2f,0x02,0x34,0x63,0x00,0xed,0x24,0x02,0x00,0x01,0x10,0xc2,0x00,0x2c,
+0xa0,0x65,0x00,0x00,0xa3,0x80,0x81,0x58,0x93,0x83,0x81,0xf1,0x24,0x02,0x00,0x01,
+0x10,0x62,0x00,0x08,0x00,0x00,0x00,0x00,0x8f,0x87,0x84,0x10,0x8f,0x82,0x84,0x44,
+0x00,0x00,0x00,0x00,0x24,0x42,0x00,0x01,0xaf,0x82,0x84,0x44,0x08,0x00,0x15,0x9b,
+0x3c,0x02,0xb0,0x03,0x8f,0x87,0x84,0x10,0x00,0x00,0x00,0x00,0x24,0xe2,0xff,0xfc,
+0x2c,0x42,0x00,0x03,0x14,0x40,0x00,0x0a,0x3c,0x03,0xb0,0x06,0x93,0x82,0x86,0x3c,
+0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x07,0x34,0x63,0x80,0x18,0x27,0x84,0x84,0x68,
+0x0c,0x00,0x27,0x75,0x00,0x00,0x00,0x00,0x8f,0x87,0x84,0x10,0x3c,0x03,0xb0,0x06,
+0x34,0x63,0x80,0x18,0x8c,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x17,0x02,
+0x10,0x40,0xff,0xe6,0x00,0x00,0x00,0x00,0x8f,0x82,0xbc,0x10,0x8f,0x84,0xbc,0x18,
+0x3c,0x05,0xb0,0x01,0x00,0x45,0x10,0x21,0xac,0x44,0x00,0x00,0x8f,0x83,0xbc,0x10,
+0x8f,0x82,0xbc,0x14,0x00,0x65,0x18,0x21,0x08,0x00,0x15,0xc7,0xac,0x62,0x00,0x04,
+0x14,0xa0,0xff,0xd4,0x3c,0x02,0xb0,0x03,0x93,0x83,0x81,0x58,0x34,0x42,0x00,0xee,
+0x24,0x63,0x00,0x01,0x30,0x64,0x00,0xff,0x2c,0x84,0x00,0xf1,0xa0,0x43,0x00,0x00,
+0xa3,0x83,0x81,0x58,0x14,0x80,0xff,0xcc,0x00,0x00,0x00,0x00,0xaf,0x86,0x84,0x24,
+0xa3,0x86,0x86,0x23,0x08,0x00,0x15,0xc1,0x00,0x00,0x00,0x00,0x27,0x84,0x84,0x68,
+0x0c,0x00,0x29,0x6e,0x00,0x00,0x00,0x00,0xa3,0x82,0x84,0x41,0x8f,0x82,0x84,0x44,
+0xaf,0x80,0x84,0x10,0x24,0x42,0x00,0x01,0xaf,0x82,0x84,0x44,0x08,0x00,0x15,0x9a,
+0x00,0x00,0x38,0x21,0x27,0x84,0x86,0x48,0x0c,0x00,0x19,0x19,0x00,0x00,0x00,0x00,
+0x30,0x42,0x00,0xff,0x14,0x40,0x00,0x05,0x3c,0x03,0xb0,0x05,0xaf,0x80,0x84,0x10,
+0xaf,0x80,0x84,0x14,0x08,0x00,0x15,0xc6,0x00,0x00,0x00,0x00,0x34,0x63,0x04,0x50,
+0x90,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0xff,0xaf,0x82,0x84,0x3c,
+0x14,0x40,0x00,0x20,0x24,0x02,0x00,0x01,0x8f,0x84,0x84,0x18,0x00,0x00,0x00,0x00,
+0x10,0x82,0x00,0x20,0x3c,0x03,0xb0,0x09,0x34,0x63,0x01,0x60,0x90,0x62,0x00,0x00,
+0x00,0x00,0x00,0x00,0x30,0x42,0x00,0xff,0xaf,0x82,0x84,0x24,0x14,0x40,0x00,0x15,
+0x24,0x02,0x00,0x01,0x24,0x02,0x00,0x02,0x10,0x82,0x00,0x07,0x00,0x00,0x00,0x00,
+0x24,0x07,0x00,0x03,0x24,0x02,0x00,0x01,0xaf,0x82,0x84,0x14,0xaf,0x87,0x84,0x10,
+0x08,0x00,0x15,0xc6,0x00,0x00,0x00,0x00,0x3c,0x02,0xb0,0x05,0x34,0x42,0x02,0x2e,
+0x90,0x43,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x63,0x00,0x01,0x30,0x63,0x00,0xff,
+0x00,0x60,0x10,0x21,0xa7,0x83,0x84,0x30,0x14,0x40,0xff,0xf1,0x00,0x00,0x00,0x00,
+0x24,0x02,0x00,0x01,0xaf,0x82,0x84,0x14,0xaf,0x80,0x84,0x10,0x08,0x00,0x15,0xc6,
+0x00,0x00,0x00,0x00,0x3c,0x03,0xb0,0x05,0x34,0x63,0x02,0x2c,0x8c,0x62,0x00,0x00,
+0x00,0x00,0x00,0x00,0x30,0x42,0x00,0xff,0xaf,0x82,0x84,0x2c,0x14,0x40,0xff,0xf5,
+0x24,0x02,0x00,0x01,0x08,0x00,0x16,0x1a,0x3c,0x03,0xb0,0x09,0x27,0x84,0x86,0x48,
+0x0c,0x00,0x1a,0xde,0x00,0x00,0x00,0x00,0x83,0x82,0x84,0x40,0x00,0x00,0x00,0x00,
+0x14,0x40,0xff,0xec,0x24,0x02,0x00,0x02,0x3c,0x03,0xb0,0x05,0x34,0x63,0x04,0x50,
+0x90,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0xff,0xaf,0x82,0x84,0x3c,
+0x14,0x40,0xff,0xe4,0x24,0x02,0x00,0x02,0x8f,0x84,0x84,0x18,0x24,0x02,0x00,0x01,
+0x10,0x82,0x00,0x12,0x24,0x02,0x00,0x02,0x10,0x82,0x00,0x04,0x00,0x00,0x00,0x00,
+0x24,0x07,0x00,0x04,0x08,0x00,0x16,0x26,0x24,0x02,0x00,0x02,0x3c,0x02,0xb0,0x05,
+0x34,0x42,0x02,0x2e,0x90,0x43,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x63,0x00,0x01,
+0x30,0x63,0x00,0xff,0x00,0x60,0x10,0x21,0xa7,0x83,0x84,0x30,0x14,0x40,0xff,0xf4,
+0x00,0x00,0x00,0x00,0x08,0x00,0x16,0x35,0x24,0x02,0x00,0x02,0x3c,0x03,0xb0,0x05,
+0x34,0x63,0x02,0x2c,0x8c,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0xff,
+0xaf,0x82,0x84,0x2c,0x14,0x40,0xff,0xf7,0x00,0x00,0x00,0x00,0x08,0x00,0x16,0x56,
+0x24,0x02,0x00,0x02,0x27,0x84,0x89,0x08,0x0c,0x00,0x0b,0x51,0x00,0x00,0x00,0x00,
+0x8f,0x83,0x84,0x14,0xaf,0x82,0x84,0x2c,0x38,0x64,0x00,0x02,0x00,0x04,0x18,0x0a,
+0xaf,0x83,0x84,0x14,0x14,0x40,0xff,0xad,0x24,0x07,0x00,0x05,0x8f,0x82,0x89,0x48,
+0xaf,0x80,0x84,0x10,0x10,0x40,0x00,0x02,0x24,0x04,0x00,0x01,0xaf,0x84,0x84,0x18,
+0x93,0x82,0x89,0x56,0x00,0x00,0x00,0x00,0x10,0x40,0xff,0x43,0x00,0x00,0x00,0x00,
+0x3c,0x02,0xb0,0x05,0x34,0x42,0x00,0x08,0x8c,0x43,0x00,0x00,0x3c,0x04,0x20,0x00,
+0x00,0x64,0x18,0x24,0x10,0x60,0xff,0x3c,0x00,0x00,0x00,0x00,0x3c,0x02,0xb0,0x03,
+0x34,0x42,0x00,0xa0,0x8c,0x43,0x00,0x00,0x3c,0x04,0x80,0x00,0xaf,0x80,0x89,0x30,
+0x24,0x63,0x00,0x01,0xac,0x43,0x00,0x00,0x3c,0x01,0xb0,0x05,0xac,0x24,0x00,0x08,
+0xaf,0x80,0x89,0x2c,0xaf,0x80,0x89,0x34,0xaf,0x80,0x89,0x38,0xaf,0x80,0x89,0x44,
+0xaf,0x80,0x89,0x3c,0x08,0x00,0x15,0xc6,0x00,0x00,0x00,0x00,0x83,0x82,0x84,0x60,
+0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x02,0x24,0x02,0x00,0x20,0xaf,0x82,0x84,0x2c,
+0x8f,0x85,0x84,0x2c,0x27,0x84,0x89,0x08,0x0c,0x00,0x0d,0x2c,0x00,0x00,0x00,0x00,
+0x00,0x02,0x1e,0x00,0xa3,0x82,0x84,0x40,0xaf,0x80,0x84,0x2c,0x10,0x60,0xff,0x8e,
+0x00,0x00,0x00,0x00,0x3c,0x02,0xb0,0x05,0x34,0x42,0x02,0x2e,0x90,0x43,0x00,0x00,
+0x00,0x00,0x00,0x00,0x30,0x63,0x00,0x01,0x30,0x63,0x00,0xff,0x00,0x60,0x10,0x21,
+0xa7,0x83,0x84,0x30,0x10,0x40,0x00,0x04,0x24,0x04,0x00,0x02,0xaf,0x84,0x84,0x18,
+0x08,0x00,0x16,0x36,0x00,0x00,0x00,0x00,0x08,0x00,0x16,0x27,0x24,0x07,0x00,0x06,
+0x27,0x84,0x84,0x10,0x27,0x85,0x89,0x08,0x0c,0x00,0x0d,0xf9,0x00,0x00,0x00,0x00,
+0x8f,0x82,0x84,0x34,0xaf,0x80,0x84,0x3c,0x14,0x40,0x00,0x19,0x00,0x40,0x18,0x21,
+0x8f,0x82,0x84,0x38,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x15,0x24,0x02,0x00,0x02,
+0x8f,0x83,0x84,0x18,0x00,0x00,0x00,0x00,0x10,0x62,0x00,0x0b,0x3c,0x02,0x40,0x00,
+0x8f,0x83,0x84,0x14,0x24,0x02,0x00,0x01,0x10,0x62,0x00,0x02,0x24,0x07,0x00,0x03,
+0x24,0x07,0x00,0x06,0xaf,0x87,0x84,0x10,0x24,0x04,0x00,0x03,0xaf,0x84,0x84,0x18,
+0x08,0x00,0x15,0xc6,0x00,0x00,0x00,0x00,0x34,0x42,0x00,0x14,0x3c,0x01,0xb0,0x05,
+0xac,0x22,0x00,0x00,0xaf,0x80,0x84,0x10,0x08,0x00,0x16,0xcf,0x24,0x04,0x00,0x03,
+0x10,0x60,0x00,0x10,0x00,0x00,0x00,0x00,0x27,0x84,0x84,0x10,0x27,0x85,0x89,0x08,
+0x0c,0x00,0x0e,0x1d,0x00,0x00,0x00,0x00,0x8f,0x83,0x84,0x14,0x24,0x02,0x00,0x01,
+0xa3,0x80,0x84,0x40,0xaf,0x80,0x84,0x18,0x10,0x62,0x00,0x02,0x24,0x07,0x00,0x03,
+0x24,0x07,0x00,0x04,0xaf,0x87,0x84,0x10,0xaf,0x80,0x84,0x34,0x08,0x00,0x15,0xc6,
+0x00,0x00,0x00,0x00,0x83,0x82,0x84,0x60,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x04,
+0x00,0x00,0x00,0x00,0x27,0x84,0x89,0x08,0x0c,0x00,0x10,0x65,0x00,0x00,0x00,0x00,
+0x8f,0x82,0x84,0x14,0xa3,0x80,0x84,0x40,0xaf,0x80,0x84,0x10,0xaf,0x80,0x84,0x18,
+0x14,0x40,0x00,0x03,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x02,0xaf,0x82,0x84,0x14,
+0xaf,0x80,0x84,0x38,0x08,0x00,0x15,0xc6,0x00,0x00,0x00,0x00,0x27,0x84,0x84,0x10,
+0x27,0x85,0x89,0x08,0x0c,0x00,0x0e,0x1d,0x00,0x00,0x00,0x00,0x8f,0x82,0x84,0x14,
+0xa3,0x80,0x84,0x40,0xaf,0x80,0x84,0x10,0xaf,0x80,0x84,0x18,0x14,0x40,0xfe,0xc2,
+0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x02,0xaf,0x82,0x84,0x14,0x08,0x00,0x15,0xc6,
+0x00,0x00,0x00,0x00,0x27,0x84,0x89,0x08,0x0c,0x00,0x10,0x65,0x00,0x00,0x00,0x00,
+0x08,0x00,0x16,0xff,0x00,0x00,0x00,0x00,0x27,0x84,0x84,0x68,0x0c,0x00,0x2a,0x96,
+0x00,0x00,0x00,0x00,0x08,0x00,0x15,0xfe,0x00,0x00,0x00,0x00,0x0c,0x00,0x24,0x66,
+0x00,0x00,0x00,0x00,0x0c,0x00,0x27,0x56,0x00,0x00,0x00,0x00,0x0c,0x00,0x18,0x40,
+0x00,0x00,0x00,0x00,0x27,0x84,0x84,0x68,0x0c,0x00,0x27,0x64,0x00,0x00,0x00,0x00,
+0x93,0x83,0xbc,0x08,0x00,0x00,0x00,0x00,0x14,0x60,0x00,0x2b,0x3c,0x02,0xb0,0x03,
+0x34,0x42,0x01,0x08,0x8c,0x44,0x00,0x00,0x8f,0x83,0xbc,0x00,0x8f,0x82,0xbc,0x04,
+0x00,0x83,0x18,0x23,0x00,0x43,0x10,0x2b,0x10,0x40,0x00,0x23,0x3c,0x02,0xb0,0x03,
+0x24,0x04,0x05,0xa0,0x34,0x42,0x01,0x18,0x8c,0x42,0x00,0x00,0x0c,0x00,0x06,0xce,
+0x00,0x00,0x00,0x00,0x24,0x04,0x05,0xa4,0x0c,0x00,0x06,0xce,0x00,0x02,0x84,0x02,
+0x30,0x51,0xff,0xff,0x24,0x04,0x05,0xa8,0x00,0x02,0x94,0x02,0x0c,0x00,0x06,0xce,
+0x3a,0x10,0xff,0xff,0x3a,0x31,0xff,0xff,0x30,0x42,0xff,0xff,0x2e,0x10,0x00,0x01,
+0x2e,0x31,0x00,0x01,0x3a,0x52,0xff,0xff,0x02,0x11,0x80,0x25,0x2e,0x52,0x00,0x01,
+0x38,0x42,0xff,0xff,0x02,0x12,0x80,0x25,0x2c,0x42,0x00,0x01,0x02,0x02,0x80,0x25,
+0x16,0x00,0x00,0x02,0x24,0x04,0x00,0x02,0x00,0x00,0x20,0x21,0x0c,0x00,0x05,0x70,
+0x00,0x00,0x00,0x00,0x3c,0x02,0xb0,0x03,0x34,0x42,0x01,0x08,0x8c,0x43,0x00,0x00,
+0x00,0x00,0x00,0x00,0xaf,0x83,0xbc,0x00,0x0c,0x00,0x01,0xeb,0x00,0x00,0x00,0x00,
+0xaf,0x80,0x84,0x10,0xaf,0x80,0x84,0x44,0x08,0x00,0x15,0x9a,0x00,0x00,0x38,0x21,
+0x27,0x90,0xb3,0xf0,0x24,0x11,0x00,0x12,0x8e,0x04,0x00,0x00,0x00,0x00,0x00,0x00,
+0x90,0x82,0x00,0x10,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x03,0x00,0x00,0x00,0x00,
+0x0c,0x00,0x20,0xd0,0x00,0x00,0x00,0x00,0x26,0x31,0xff,0xff,0x06,0x21,0xff,0xf6,
+0x26,0x10,0x00,0x04,0xaf,0x80,0x84,0x10,0x08,0x00,0x15,0xc7,0x00,0x00,0x38,0x21,
+0x3c,0x02,0xb0,0x03,0x34,0x42,0x01,0x08,0x8c,0x44,0x00,0x00,0x8f,0x82,0x84,0x08,
+0x00,0x04,0x19,0xc2,0x00,0x02,0x11,0xc2,0x10,0x62,0xff,0xf6,0x00,0x00,0x00,0x00,
+0x3c,0x02,0xb0,0x03,0x34,0x42,0x01,0x02,0x90,0x43,0x00,0x00,0x3c,0x12,0xb0,0x05,
+0xaf,0x84,0x84,0x08,0x30,0x63,0x00,0xff,0x00,0x03,0x11,0x40,0x00,0x43,0x10,0x23,
+0x00,0x02,0x10,0x80,0x00,0x43,0x10,0x21,0x00,0x02,0x99,0x00,0x00,0x00,0x88,0x21,
+0x36,0x52,0x02,0x2c,0x27,0x90,0xb3,0xf0,0x8e,0x04,0x00,0x00,0x00,0x00,0x00,0x00,
+0x90,0x83,0x00,0x16,0x00,0x00,0x00,0x00,0x30,0x62,0x00,0x03,0x10,0x40,0x00,0x06,
+0x30,0x62,0x00,0x1c,0x14,0x40,0x00,0x04,0x00,0x00,0x00,0x00,0x8f,0x85,0x84,0x08,
+0x0c,0x00,0x1e,0xb2,0x02,0x60,0x30,0x21,0x8e,0x42,0x00,0x00,0x00,0x00,0x00,0x00,
+0x30,0x42,0x00,0xff,0x14,0x40,0xff,0xd7,0x00,0x00,0x00,0x00,0x26,0x31,0x00,0x01,
+0x2a,0x22,0x00,0x13,0x14,0x40,0xff,0xec,0x26,0x10,0x00,0x04,0x08,0x00,0x17,0x5d,
+0x00,0x00,0x00,0x00,0x8f,0x84,0x84,0x1c,0x27,0x85,0x89,0x08,0x0c,0x00,0x17,0xd3,
+0x00,0x00,0x00,0x00,0x8f,0x83,0x84,0x1c,0x24,0x02,0x00,0x04,0x14,0x62,0xfe,0xa2,
+0x00,0x00,0x00,0x00,0x08,0x00,0x16,0x27,0x24,0x07,0x00,0x05,0x27,0x84,0x89,0x08,
+0x0c,0x00,0x24,0x8d,0x00,0x00,0x00,0x00,0x24,0x07,0x00,0x05,0xaf,0x87,0x84,0x10,
+0x08,0x00,0x15,0xc7,0x00,0x00,0x00,0x00,0x8f,0x82,0x89,0x3c,0x00,0x00,0x00,0x00,
+0x10,0x40,0x00,0x0d,0x00,0x00,0x00,0x00,0x8f,0x84,0xb4,0x30,0xaf,0x80,0x89,0x3c,
+0x94,0x85,0x00,0x14,0x0c,0x00,0x1b,0x84,0x00,0x00,0x00,0x00,0x93,0x82,0x8b,0x61,
+0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x02,0x10,0x40,0x00,0x03,0x00,0x00,0x00,0x00,
+0x0c,0x00,0x01,0x59,0x00,0x00,0x20,0x21,0x8f,0x84,0xb4,0x30,0x0c,0x00,0x20,0xd0,
+0x00,0x00,0x00,0x00,0x08,0x00,0x17,0x5d,0x00,0x00,0x00,0x00,0x3c,0x02,0xff,0x90,
+0x27,0xbd,0xff,0xe8,0x00,0x80,0x18,0x21,0x34,0x42,0x00,0x01,0x27,0x84,0x89,0x08,
+0x10,0x62,0x00,0x05,0xaf,0xbf,0x00,0x10,0x8f,0xbf,0x00,0x10,0x00,0x00,0x00,0x00,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x18,0x0c,0x00,0x06,0xe1,0x00,0x00,0x00,0x00,
+0x27,0x84,0x86,0x48,0x0c,0x00,0x18,0x4e,0x00,0x00,0x00,0x00,0x27,0x84,0x84,0x10,
+0x0c,0x00,0x13,0xd5,0x00,0x00,0x00,0x00,0x08,0x00,0x17,0xba,0x00,0x00,0x00,0x00,
+0x8f,0x82,0x89,0x48,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x05,0x00,0x00,0x18,0x21,
+0x8f,0x82,0x84,0x18,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x02,0x00,0x00,0x00,0x00,
+0x24,0x03,0x00,0x01,0x03,0xe0,0x00,0x08,0x00,0x60,0x10,0x21,0x27,0xbd,0xff,0xe0,
+0x3c,0x06,0xb0,0x03,0xaf,0xb1,0x00,0x14,0xaf,0xb0,0x00,0x10,0x34,0xc6,0x00,0x5f,
+0xaf,0xbf,0x00,0x18,0x90,0xc3,0x00,0x00,0x3c,0x07,0xb0,0x03,0x34,0xe7,0x00,0x5d,
+0x34,0x63,0x00,0x01,0x3c,0x09,0xb0,0x03,0x24,0x02,0x00,0x01,0xa0,0xc3,0x00,0x00,
+0x00,0x80,0x80,0x21,0xa0,0xe2,0x00,0x00,0x00,0xa0,0x88,0x21,0x35,0x29,0x00,0x5e,
+0x00,0xe0,0x40,0x21,0x24,0x04,0x00,0x01,0x91,0x22,0x00,0x00,0x91,0x03,0x00,0x00,
+0x30,0x42,0x00,0x01,0x14,0x83,0x00,0x03,0x30,0x42,0x00,0x01,0x14,0x40,0xff,0xfa,
+0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x04,0x12,0x02,0x00,0x2c,0x24,0x05,0x0f,0x00,
+0x24,0x02,0x00,0x06,0x12,0x02,0x00,0x08,0x24,0x05,0x00,0x0f,0x3c,0x02,0xb0,0x03,
+0x34,0x42,0x02,0x00,0xa0,0x50,0x00,0x00,0x8f,0xbf,0x00,0x18,0x7b,0xb0,0x00,0xbc,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x20,0x24,0x04,0x0c,0x04,0x0c,0x00,0x13,0x5b,
+0x24,0x06,0x00,0x0f,0x24,0x04,0x0d,0x04,0x24,0x05,0x00,0x0f,0x0c,0x00,0x13,0x5b,
+0x24,0x06,0x00,0x0f,0x24,0x04,0x08,0x80,0x24,0x05,0x1e,0x00,0x0c,0x00,0x13,0x5b,
+0x24,0x06,0x00,0x0f,0x24,0x04,0x08,0x8c,0x24,0x05,0x0f,0x00,0x0c,0x00,0x13,0x5b,
+0x24,0x06,0x00,0x0f,0x24,0x04,0x08,0x24,0x3c,0x05,0x00,0x30,0x0c,0x00,0x13,0x5b,
+0x24,0x06,0x00,0x02,0x24,0x04,0x08,0x2c,0x3c,0x05,0x00,0x30,0x0c,0x00,0x13,0x5b,
+0x24,0x06,0x00,0x02,0x24,0x04,0x08,0x34,0x3c,0x05,0x00,0x30,0x0c,0x00,0x13,0x5b,
+0x24,0x06,0x00,0x02,0x24,0x04,0x08,0x3c,0x3c,0x05,0x00,0x30,0x0c,0x00,0x13,0x5b,
+0x24,0x06,0x00,0x02,0x08,0x00,0x17,0xf4,0x3c,0x02,0xb0,0x03,0x24,0x04,0x08,0x8c,
+0x0c,0x00,0x13,0x5b,0x24,0x06,0x00,0x04,0x24,0x04,0x08,0x80,0x24,0x05,0x1e,0x00,
+0x0c,0x00,0x13,0x5b,0x24,0x06,0x00,0x04,0x24,0x04,0x0c,0x04,0x24,0x05,0x00,0x0f,
+0x0c,0x00,0x13,0x5b,0x24,0x06,0x00,0x04,0x24,0x04,0x0d,0x04,0x24,0x05,0x00,0x0f,
+0x0c,0x00,0x13,0x5b,0x24,0x06,0x00,0x04,0x24,0x04,0x08,0x24,0x3c,0x05,0x00,0x30,
+0x0c,0x00,0x13,0x5b,0x24,0x06,0x00,0x03,0x24,0x04,0x08,0x2c,0x3c,0x05,0x00,0x30,
+0x0c,0x00,0x13,0x5b,0x24,0x06,0x00,0x03,0x24,0x04,0x08,0x34,0x3c,0x05,0x00,0x30,
+0x0c,0x00,0x13,0x5b,0x24,0x06,0x00,0x02,0x3c,0x05,0x00,0x30,0x24,0x06,0x00,0x03,
+0x0c,0x00,0x13,0x5b,0x24,0x04,0x08,0x3c,0x02,0x20,0x20,0x21,0x24,0x05,0x00,0x14,
+0x0c,0x00,0x13,0xa0,0x24,0x06,0x01,0x07,0x08,0x00,0x17,0xf4,0x3c,0x02,0xb0,0x03,
+0x3c,0x03,0xb0,0x03,0x34,0x63,0x00,0x73,0x90,0x62,0x00,0x00,0x00,0x00,0x00,0x00,
+0x30,0x42,0x00,0x02,0x14,0x40,0x00,0x04,0x00,0x00,0x00,0x00,0xa3,0x80,0x81,0x59,
+0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x01,0xa3,0x82,0x81,0x59,
+0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,
+0x00,0x80,0x70,0x21,0x34,0x63,0x00,0x20,0x24,0x42,0x61,0x38,0x3c,0x04,0xb0,0x03,
+0xac,0x62,0x00,0x00,0x34,0x84,0x00,0x30,0xad,0xc0,0x02,0xbc,0xad,0xc0,0x02,0xb8,
+0x8c,0x83,0x00,0x00,0x24,0x02,0x00,0xff,0xa5,0xc0,0x00,0x0a,0x00,0x00,0x30,0x21,
+0xa7,0x82,0x8f,0xe0,0x27,0x88,0x8f,0xf0,0xa5,0xc3,0x00,0x08,0x3c,0x07,0xb0,0x08,
+0x30,0xc2,0xff,0xff,0x00,0x02,0x20,0xc0,0x24,0xc3,0x00,0x01,0x00,0x82,0x10,0x21,
+0x00,0x60,0x30,0x21,0x00,0x02,0x10,0x80,0x30,0x63,0xff,0xff,0x00,0x48,0x10,0x21,
+0x00,0x87,0x20,0x21,0x28,0xc5,0x00,0xff,0xac,0x83,0x00,0x00,0x14,0xa0,0xff,0xf4,
+0xa4,0x43,0x00,0x00,0x3c,0x02,0xb0,0x08,0x34,0x03,0xff,0xff,0x25,0xc4,0x00,0x0c,
+0x24,0x0a,0x00,0x02,0x34,0x42,0x07,0xf8,0x3c,0x06,0xb0,0x03,0xa7,0x83,0xb3,0xcc,
+0xac,0x43,0x00,0x00,0xaf,0x84,0xb3,0xf0,0x34,0xc6,0x00,0x64,0xa0,0x8a,0x00,0x18,
+0x94,0xc5,0x00,0x00,0x8f,0x82,0xb3,0xf0,0x25,0xc4,0x00,0x30,0x24,0x08,0x00,0x03,
+0x3c,0x03,0xb0,0x03,0xa0,0x45,0x00,0x21,0x34,0x63,0x00,0x66,0xaf,0x84,0xb3,0xf4,
+0xa0,0x88,0x00,0x18,0x94,0x65,0x00,0x00,0x8f,0x82,0xb3,0xf4,0x25,0xc4,0x00,0x54,
+0x25,0xc7,0x00,0x78,0xa0,0x45,0x00,0x21,0xaf,0x84,0xb3,0xf8,0xa0,0x88,0x00,0x18,
+0x94,0x65,0x00,0x00,0x8f,0x82,0xb3,0xf8,0x25,0xc8,0x00,0x9c,0x24,0x09,0x00,0x01,
+0xa0,0x45,0x00,0x21,0xaf,0x87,0xb3,0xfc,0xa0,0xea,0x00,0x18,0x94,0xc4,0x00,0x00,
+0x8f,0x82,0xb3,0xfc,0x3c,0x03,0xb0,0x03,0x34,0x63,0x00,0x62,0xa0,0x44,0x00,0x21,
+0xaf,0x88,0xb4,0x00,0xa1,0x09,0x00,0x18,0x94,0x65,0x00,0x00,0x8f,0x82,0xb4,0x00,
+0x25,0xc4,0x00,0xc0,0x3c,0x06,0xb0,0x03,0xa0,0x45,0x00,0x21,0xaf,0x84,0xb4,0x04,
+0xa0,0x89,0x00,0x18,0x94,0x65,0x00,0x00,0x8f,0x82,0xb4,0x04,0x25,0xc4,0x00,0xe4,
+0x34,0xc6,0x00,0x60,0xa0,0x45,0x00,0x21,0xaf,0x84,0xb4,0x08,0xa0,0x80,0x00,0x18,
+0x94,0xc5,0x00,0x00,0x8f,0x82,0xb4,0x08,0x25,0xc3,0x01,0x08,0x25,0xc7,0x01,0x2c,
+0xa0,0x45,0x00,0x21,0xaf,0x83,0xb4,0x0c,0xa0,0x60,0x00,0x18,0x94,0xc8,0x00,0x00,
+0x8f,0x82,0xb4,0x0c,0x25,0xc4,0x01,0x50,0x25,0xc5,0x01,0x74,0xa0,0x48,0x00,0x21,
+0x25,0xc6,0x01,0x98,0x25,0xc9,0x01,0xbc,0x25,0xca,0x01,0xe0,0x25,0xcb,0x02,0x04,
+0x25,0xcc,0x02,0x28,0x25,0xcd,0x02,0x4c,0x24,0x02,0x00,0x10,0x3c,0x03,0xb0,0x03,
+0xaf,0x87,0xb4,0x10,0x34,0x63,0x00,0x38,0xa0,0xe0,0x00,0x18,0xaf,0x84,0xb4,0x14,
+0xa0,0x80,0x00,0x18,0xaf,0x85,0xb4,0x18,0xa0,0xa0,0x00,0x18,0xaf,0x86,0xb4,0x1c,
+0xa0,0xc0,0x00,0x18,0xaf,0x89,0xb4,0x20,0xa1,0x20,0x00,0x18,0xaf,0x8a,0xb4,0x24,
+0xa1,0x40,0x00,0x18,0xaf,0x8b,0xb4,0x28,0xa1,0x60,0x00,0x18,0xaf,0x8c,0xb4,0x2c,
+0xa1,0x80,0x00,0x18,0xaf,0x8d,0xb4,0x30,0xa1,0xa2,0x00,0x18,0x94,0x64,0x00,0x00,
+0x8f,0x82,0xb4,0x30,0x25,0xc5,0x02,0x70,0x3c,0x03,0xb0,0x03,0xa0,0x44,0x00,0x21,
+0x24,0x02,0x00,0x11,0xaf,0x85,0xb4,0x34,0x34,0x63,0x00,0x6e,0xa0,0xa2,0x00,0x18,
+0x94,0x64,0x00,0x00,0x8f,0x82,0xb4,0x34,0x25,0xc5,0x02,0x94,0x3c,0x03,0xb0,0x03,
+0xa0,0x44,0x00,0x21,0x24,0x02,0x00,0x12,0xaf,0x85,0xb4,0x38,0x34,0x63,0x00,0x6c,
+0xa0,0xa2,0x00,0x18,0x94,0x64,0x00,0x00,0x8f,0x82,0xb4,0x38,0x24,0x05,0xff,0xff,
+0x24,0x07,0x00,0x01,0xa0,0x44,0x00,0x21,0x24,0x06,0x00,0x12,0x27,0x84,0xb3,0xf0,
+0x8c,0x82,0x00,0x00,0x24,0xc6,0xff,0xff,0xa0,0x40,0x00,0x04,0x8c,0x83,0x00,0x00,
+0xa4,0x45,0x00,0x00,0xa4,0x45,0x00,0x02,0xa0,0x60,0x00,0x0a,0x8c,0x82,0x00,0x00,
+0xa4,0x65,0x00,0x06,0xa4,0x65,0x00,0x08,0xa0,0x40,0x00,0x10,0x8c,0x83,0x00,0x00,
+0xa4,0x45,0x00,0x0c,0xa4,0x45,0x00,0x0e,0xa0,0x60,0x00,0x12,0x8c,0x82,0x00,0x00,
+0x00,0x00,0x00,0x00,0xa0,0x40,0x00,0x16,0x8c,0x83,0x00,0x00,0xa4,0x45,0x00,0x14,
+0xa0,0x67,0x00,0x17,0x8c,0x82,0x00,0x00,0x24,0x84,0x00,0x04,0xa0,0x40,0x00,0x20,
+0x04,0xc1,0xff,0xe7,0xac,0x40,0x00,0x1c,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,
+0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,0x34,0x63,0x00,0x20,0x24,0x42,0x64,0x00,
+0x00,0x05,0x28,0x40,0xac,0x62,0x00,0x00,0x00,0xa6,0x28,0x21,0x2c,0xe2,0x00,0x10,
+0x14,0x80,0x00,0x06,0x00,0x00,0x18,0x21,0x10,0x40,0x00,0x02,0x00,0x00,0x00,0x00,
+0x00,0xe0,0x18,0x21,0x03,0xe0,0x00,0x08,0x00,0x60,0x10,0x21,0x24,0x02,0x00,0x20,
+0x10,0xe2,0x00,0x06,0x2c,0xe4,0x00,0x10,0x24,0xa2,0x00,0x01,0x10,0x80,0xff,0xf9,
+0x00,0x02,0x11,0x00,0x08,0x00,0x19,0x0d,0x00,0x47,0x18,0x21,0x08,0x00,0x19,0x0d,
+0x24,0xa3,0x00,0x50,0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,0x27,0xbd,0xff,0xc8,
+0x34,0x63,0x00,0x20,0x24,0x42,0x64,0x64,0xaf,0xb2,0x00,0x18,0xaf,0xbf,0x00,0x34,
+0xaf,0xbe,0x00,0x30,0xaf,0xb7,0x00,0x2c,0xaf,0xb6,0x00,0x28,0xaf,0xb5,0x00,0x24,
+0xaf,0xb4,0x00,0x20,0xaf,0xb3,0x00,0x1c,0xaf,0xb1,0x00,0x14,0xaf,0xb0,0x00,0x10,
+0xac,0x62,0x00,0x00,0x8c,0x86,0x02,0xbc,0x00,0x80,0x90,0x21,0x14,0xc0,0x01,0x66,
+0x00,0xc0,0x38,0x21,0x84,0x82,0x00,0x08,0x3c,0x03,0xb0,0x06,0x94,0x84,0x00,0x08,
+0x00,0x02,0x10,0x80,0x00,0x43,0x10,0x21,0x8c,0x45,0x00,0x00,0x8c,0x43,0x00,0x00,
+0x24,0x84,0x00,0x02,0x30,0x84,0x01,0xff,0x30,0xb1,0xff,0xff,0x00,0x03,0x44,0x02,
+0xa6,0x44,0x00,0x08,0x14,0xe0,0x00,0x08,0x3c,0x03,0xb0,0x06,0x34,0x63,0x80,0x24,
+0x8c,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x34,0x42,0x01,0x00,0xac,0x62,0x00,0x00,
+0x8e,0x46,0x02,0xbc,0x00,0x00,0x00,0x00,0x14,0xc0,0x01,0x4c,0x00,0x11,0x98,0xc0,
+0x00,0x11,0x3a,0x00,0x3c,0x04,0xb0,0x00,0x00,0xe4,0x20,0x21,0x8c,0x83,0x00,0x0c,
+0x00,0x11,0x98,0xc0,0x02,0x71,0x10,0x21,0x00,0x03,0x1b,0x82,0x30,0x63,0x00,0x1f,
+0x00,0x02,0x10,0x80,0x27,0x9e,0x8f,0xf4,0x00,0x5e,0x10,0x21,0x00,0x60,0x30,0x21,
+0xac,0x44,0x00,0x18,0xae,0x43,0x02,0xbc,0x14,0xc0,0x00,0x10,0x3c,0x02,0xb0,0x00,
+0x00,0x08,0x10,0xc0,0x00,0x48,0x10,0x21,0x27,0x84,0x8f,0xf0,0x00,0x02,0x10,0x80,
+0x00,0x44,0x10,0x21,0x94,0x45,0x00,0x00,0x02,0x71,0x18,0x21,0x00,0x03,0x18,0x80,
+0x00,0x64,0x18,0x21,0x24,0x02,0xff,0xff,0xa4,0x62,0x00,0x02,0xa4,0x68,0x00,0x04,
+0xae,0x51,0x02,0xb8,0xa6,0x45,0x00,0x0a,0x3c,0x02,0xb0,0x00,0x00,0xe2,0x40,0x21,
+0x8d,0x16,0x00,0x00,0x8d,0x14,0x00,0x04,0x02,0x71,0x10,0x21,0x00,0x02,0x38,0x80,
+0x00,0x14,0x1a,0x02,0x27,0x84,0x90,0x00,0x30,0x63,0x00,0x1f,0x24,0x02,0x00,0x10,
+0x00,0xe4,0x20,0x21,0xa6,0x43,0x00,0x06,0x8d,0x10,0x00,0x08,0xa0,0x82,0x00,0x06,
+0x86,0x45,0x00,0x06,0x00,0xfe,0x10,0x21,0x24,0x03,0x00,0x13,0x10,0xa3,0x01,0x15,
+0xac,0x48,0x00,0x18,0x3c,0x03,0xb0,0x03,0x34,0x63,0x01,0x00,0xa6,0x40,0x00,0x02,
+0x3c,0x02,0xb0,0x03,0x90,0x64,0x00,0x00,0x34,0x42,0x01,0x08,0x8c,0x45,0x00,0x00,
+0x00,0x10,0x1b,0xc2,0x27,0x82,0x8f,0xf0,0x00,0x04,0x20,0x82,0x00,0xe2,0x10,0x21,
+0x30,0x63,0x00,0x01,0xac,0x45,0x00,0x08,0x10,0x60,0x00,0xec,0x30,0x97,0x00,0x01,
+0x00,0x10,0x16,0x82,0x30,0x46,0x00,0x01,0x00,0x10,0x12,0x02,0x00,0x10,0x19,0xc2,
+0x00,0x10,0x26,0x02,0x00,0x10,0x2e,0x42,0x30,0x47,0x00,0x7f,0x24,0x02,0x00,0x01,
+0x30,0x75,0x00,0x01,0x30,0x84,0x00,0x01,0x10,0xc2,0x00,0xd9,0x30,0xa3,0x00,0x01,
+0x0c,0x00,0x19,0x00,0x00,0x60,0x28,0x21,0x02,0x71,0x18,0x21,0x00,0x03,0x18,0x80,
+0x2c,0x46,0x00,0x54,0x27,0x85,0x90,0x00,0x27,0x84,0x8f,0xf8,0x00,0x06,0x10,0x0a,
+0x00,0x65,0x28,0x21,0x26,0xa6,0x00,0x02,0x00,0x64,0x18,0x21,0xa0,0xa2,0x00,0x02,
+0xa0,0x66,0x00,0x06,0xa0,0x62,0x00,0x07,0xa0,0xa2,0x00,0x01,0x02,0x71,0x20,0x21,
+0x00,0x04,0x20,0x80,0x00,0x9e,0x60,0x21,0x8d,0x85,0x00,0x18,0x00,0x10,0x15,0xc2,
+0x30,0x42,0x00,0x01,0x8c,0xa3,0x00,0x0c,0xa6,0x42,0x00,0x00,0x27,0x82,0x90,0x10,
+0x00,0x82,0x50,0x21,0xa6,0x56,0x00,0x04,0x8d,0x45,0x00,0x00,0x00,0x03,0x19,0x42,
+0x3c,0x02,0xff,0xef,0x34,0x42,0xff,0xff,0x30,0x63,0x00,0x01,0x00,0xa2,0x48,0x24,
+0x00,0x03,0x1d,0x00,0x01,0x23,0x48,0x25,0x00,0x09,0x15,0x02,0x26,0xc5,0x00,0x10,
+0x00,0x14,0x19,0x82,0x00,0x14,0x25,0x82,0x00,0x10,0x34,0x02,0x00,0x10,0x3c,0x42,
+0x00,0x10,0x44,0x82,0x30,0x42,0x00,0x01,0x30,0xb5,0xff,0xff,0x30,0xce,0x00,0x01,
+0x30,0xe5,0x00,0x01,0x30,0x6d,0x00,0x01,0x30,0x8b,0x00,0x03,0x32,0x94,0x00,0x07,
+0x31,0x06,0x00,0x01,0xad,0x49,0x00,0x00,0x10,0x40,0x00,0x0b,0x32,0x07,0x00,0x7f,
+0x8d,0x84,0x00,0x18,0x3c,0x03,0xff,0xf0,0x34,0x63,0xff,0xff,0x8c,0x82,0x00,0x0c,
+0x01,0x23,0x18,0x24,0x00,0x02,0x13,0x82,0x30,0x42,0x00,0x0f,0x00,0x02,0x14,0x00,
+0x00,0x62,0x18,0x25,0xad,0x43,0x00,0x00,0x24,0x02,0x00,0x01,0x10,0xc2,0x00,0x90,
+0x00,0x00,0x00,0x00,0x15,0xa0,0x00,0x03,0x00,0x00,0x00,0x00,0x15,0x60,0x00,0x81,
+0x24,0x02,0x00,0x01,0x96,0x42,0x00,0x04,0x00,0x00,0x00,0x00,0x24,0x42,0x00,0x04,
+0xa6,0x42,0x00,0x04,0x0c,0x00,0x19,0x00,0x01,0xc0,0x20,0x21,0x02,0x71,0x18,0x21,
+0x00,0x03,0x38,0x80,0x2c,0x45,0x00,0x54,0x27,0x84,0x90,0x00,0x00,0xe4,0x20,0x21,
+0x00,0x05,0x10,0x0a,0xa0,0x82,0x00,0x00,0xa0,0x80,0x00,0x04,0xa0,0x80,0x00,0x05,
+0x96,0x45,0x00,0x04,0x27,0x82,0x8f,0xf0,0x00,0xe2,0x10,0x21,0xa4,0x45,0x00,0x06,
+0x00,0xfe,0x18,0x21,0x92,0x45,0x00,0x01,0x8c,0x66,0x00,0x18,0x27,0x82,0x90,0x10,
+0x00,0xe2,0x10,0x21,0xa0,0x40,0x00,0x00,0xa0,0x85,0x00,0x07,0x94,0xc3,0x00,0x10,
+0x24,0x02,0x00,0x04,0x30,0x63,0x00,0x0f,0x10,0x62,0x00,0x5e,0x24,0xc6,0x00,0x10,
+0x94,0xc3,0x00,0x16,0x27,0x85,0x90,0x08,0x00,0xe5,0x10,0x21,0xa4,0x43,0x00,0x02,
+0x94,0xc2,0x00,0x04,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x01,0x14,0x40,0x00,0x4c,
+0x02,0x71,0x20,0x21,0x94,0xc2,0x00,0x00,0x24,0x03,0x00,0xa4,0x30,0x42,0x00,0xff,
+0x10,0x43,0x00,0x47,0x00,0x00,0x00,0x00,0x94,0xc2,0x00,0x00,0x24,0x03,0x00,0x88,
+0x30,0x42,0x00,0x88,0x10,0x43,0x00,0x3c,0x02,0x71,0x18,0x21,0x27,0x84,0x90,0x10,
+0x00,0x03,0x18,0x80,0x00,0x64,0x18,0x21,0x8c,0x62,0x00,0x00,0x3c,0x04,0x00,0x80,
+0x00,0x44,0x10,0x25,0xac,0x62,0x00,0x00,0x02,0x71,0x10,0x21,0x00,0x02,0x10,0x80,
+0x00,0x45,0x10,0x21,0xa0,0x54,0x00,0x00,0x92,0x43,0x02,0xbf,0x3c,0x02,0xb0,0x03,
+0x34,0x42,0x00,0xc3,0xa0,0x43,0x00,0x00,0x8e,0x4b,0x02,0xbc,0x00,0x00,0x00,0x00,
+0x11,0x60,0x00,0x1c,0x32,0xa2,0x00,0xff,0x00,0x15,0x1a,0x02,0x30,0x64,0xff,0xff,
+0x38,0x42,0x00,0x00,0x24,0x65,0x00,0x01,0x00,0x82,0x28,0x0a,0x02,0x20,0x30,0x21,
+0x10,0xa0,0x00,0x12,0x00,0x00,0x38,0x21,0x02,0x71,0x10,0x21,0x00,0x02,0x10,0x80,
+0x27,0x83,0x8f,0xf0,0x00,0x43,0x20,0x21,0x24,0xa9,0xff,0xff,0x3c,0x0a,0xb0,0x08,
+0x24,0x0c,0xff,0xff,0x00,0x06,0x10,0xc0,0x00,0x4a,0x10,0x21,0x8c,0x43,0x00,0x00,
+0x24,0xe8,0x00,0x01,0x10,0xe9,0x00,0x0f,0x30,0x63,0x00,0xff,0x31,0x07,0xff,0xff,
+0x00,0xe5,0x10,0x2b,0x14,0x40,0xff,0xf7,0x00,0x60,0x30,0x21,0x25,0x62,0xff,0xff,
+0xae,0x42,0x02,0xbc,0x7b,0xbe,0x01,0xbc,0x7b,0xb6,0x01,0x7c,0x7b,0xb4,0x01,0x3c,
+0x7b,0xb2,0x00,0xfc,0x7b,0xb0,0x00,0xbc,0x24,0x02,0x00,0x01,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x38,0xa4,0x86,0x00,0x04,0xa4,0x8c,0x00,0x02,0xae,0x51,0x02,0xb8,
+0x08,0x00,0x1a,0x2f,0xa6,0x43,0x00,0x0a,0x94,0xc2,0x00,0x18,0x00,0x00,0x00,0x00,
+0x30,0x42,0x00,0x60,0x10,0x40,0xff,0xc1,0x02,0x71,0x18,0x21,0x02,0x71,0x20,0x21,
+0x27,0x82,0x90,0x10,0x00,0x04,0x20,0x80,0x00,0x82,0x20,0x21,0x8c,0x83,0x00,0x00,
+0x3c,0x02,0xff,0x7f,0x34,0x42,0xff,0xff,0x00,0x62,0x18,0x24,0x08,0x00,0x1a,0x0e,
+0xac,0x83,0x00,0x00,0x27,0x85,0x90,0x08,0x00,0xe5,0x10,0x21,0x08,0x00,0x19,0xf8,
+0xa4,0x40,0x00,0x02,0x11,0x62,0x00,0x07,0x00,0x00,0x00,0x00,0x2d,0x62,0x00,0x02,
+0x14,0x40,0xff,0x80,0x00,0x00,0x00,0x00,0x96,0x42,0x00,0x04,0x08,0x00,0x19,0xd8,
+0x24,0x42,0x00,0x0c,0x96,0x42,0x00,0x04,0x08,0x00,0x19,0xd8,0x24,0x42,0x00,0x08,
+0x16,0xe6,0xff,0x70,0x3c,0x02,0xff,0xfb,0x8d,0x83,0x00,0x18,0x34,0x42,0xff,0xff,
+0x02,0x02,0x10,0x24,0xac,0x62,0x00,0x08,0x08,0x00,0x19,0xd1,0x00,0x00,0x30,0x21,
+0x16,0xe6,0xff,0x27,0x3c,0x02,0xfb,0xff,0x34,0x42,0xff,0xff,0x02,0x02,0x10,0x24,
+0xad,0x02,0x00,0x08,0x08,0x00,0x19,0x90,0x00,0x00,0x30,0x21,0x93,0x88,0xbb,0x04,
+0x00,0x10,0x1e,0x42,0x00,0x10,0x26,0x82,0x27,0x82,0x8f,0xf8,0x2d,0x05,0x00,0x0c,
+0x00,0xe2,0x48,0x21,0x30,0x63,0x00,0x01,0x30,0x86,0x00,0x01,0x14,0xa0,0x00,0x06,
+0x01,0x00,0x38,0x21,0x00,0x03,0x10,0x40,0x00,0x46,0x10,0x21,0x00,0x02,0x11,0x00,
+0x01,0x02,0x10,0x21,0x24,0x47,0x00,0x04,0x02,0x71,0x10,0x21,0x00,0x02,0x10,0x80,
+0x27,0x84,0x90,0x00,0x27,0x83,0x8f,0xf8,0x00,0x44,0x20,0x21,0x00,0x43,0x10,0x21,
+0xa1,0x27,0x00,0x07,0xa0,0x40,0x00,0x06,0xa0,0x80,0x00,0x02,0x08,0x00,0x19,0x9f,
+0xa0,0x80,0x00,0x01,0x24,0x02,0x00,0x01,0xa6,0x42,0x00,0x02,0x0c,0x00,0x01,0xc4,
+0x01,0x00,0x20,0x21,0x08,0x00,0x1a,0x35,0x00,0x00,0x00,0x00,0x27,0x9e,0x8f,0xf4,
+0x08,0x00,0x19,0x52,0x00,0x11,0x3a,0x00,0x94,0x91,0x00,0x0a,0x08,0x00,0x19,0x39,
+0x00,0x00,0x00,0x00,0x30,0xa9,0xff,0xff,0x00,0x09,0x18,0xc0,0x00,0x69,0x18,0x21,
+0x3c,0x06,0xb0,0x03,0x3c,0x02,0x80,0x00,0x24,0x42,0x6a,0x54,0x00,0x03,0x18,0x80,
+0x34,0xc6,0x00,0x20,0x27,0x85,0x90,0x00,0xac,0xc2,0x00,0x00,0x00,0x65,0x18,0x21,
+0x80,0x62,0x00,0x07,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x32,0x24,0x88,0x00,0x06,
+0x90,0x82,0x00,0x16,0x00,0x80,0x40,0x21,0x34,0x42,0x00,0x02,0x30,0x43,0x00,0x01,
+0x14,0x60,0x00,0x02,0xa0,0x82,0x00,0x16,0xa0,0x80,0x00,0x17,0x95,0x03,0x00,0x02,
+0x00,0x00,0x00,0x00,0x10,0x69,0x00,0x22,0x3c,0x02,0x34,0x34,0x91,0x02,0x00,0x04,
+0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x06,0x00,0x03,0x20,0xc0,0x24,0x02,0x00,0x01,
+0xa1,0x02,0x00,0x04,0xa5,0x09,0x00,0x02,0x03,0xe0,0x00,0x08,0xa5,0x09,0x00,0x00,
+0x00,0x83,0x20,0x21,0x27,0x87,0x8f,0xf0,0x00,0x04,0x20,0x80,0x00,0x87,0x20,0x21,
+0x94,0x83,0x00,0x04,0x3c,0x02,0xb0,0x08,0x3c,0x06,0xb0,0x03,0x00,0x03,0x28,0xc0,
+0x00,0xa3,0x18,0x21,0x00,0x03,0x18,0x80,0x00,0xa2,0x28,0x21,0x3c,0x02,0x80,0x01,
+0x24,0x42,0x82,0xe4,0x00,0x67,0x18,0x21,0x34,0xc6,0x00,0x20,0xac,0xc2,0x00,0x00,
+0xa4,0x69,0x00,0x00,0xa4,0x89,0x00,0x02,0xac,0xa9,0x00,0x00,0x91,0x02,0x00,0x04,
+0xa5,0x09,0x00,0x02,0x24,0x42,0x00,0x01,0x03,0xe0,0x00,0x08,0xa1,0x02,0x00,0x04,
+0x3c,0x03,0xb0,0x03,0x34,0x63,0x00,0xb0,0x34,0x42,0x34,0x34,0x03,0xe0,0x00,0x08,
+0xac,0x62,0x00,0x00,0x90,0x82,0x00,0x16,0x00,0x00,0x00,0x00,0x34,0x42,0x00,0x01,
+0x30,0x43,0x00,0x02,0x14,0x60,0xff,0xd1,0xa0,0x82,0x00,0x16,0x24,0x02,0x00,0x01,
+0x08,0x00,0x1a,0xab,0xa0,0x82,0x00,0x17,0x27,0xbd,0xff,0xe8,0xaf,0xbf,0x00,0x10,
+0x00,0x80,0x38,0x21,0x84,0x84,0x00,0x02,0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,
+0x3c,0x0a,0xb0,0x06,0x34,0x63,0x00,0x20,0x24,0x42,0x6b,0x78,0x3c,0x0b,0xb0,0x08,
+0x27,0x89,0x8f,0xf0,0x34,0x0c,0xff,0xff,0x35,0x4a,0x80,0x20,0x10,0x80,0x00,0x30,
+0xac,0x62,0x00,0x00,0x97,0x82,0x8f,0xe0,0x94,0xe6,0x02,0xba,0x00,0x02,0x18,0xc0,
+0x00,0x6b,0x28,0x21,0xac,0xa6,0x00,0x00,0x8c,0xe4,0x02,0xb8,0x00,0x62,0x18,0x21,
+0x00,0x03,0x18,0x80,0x00,0x04,0x10,0xc0,0x00,0x44,0x10,0x21,0x00,0x02,0x10,0x80,
+0x00,0x49,0x10,0x21,0x94,0x48,0x00,0x04,0x00,0x69,0x18,0x21,0xa4,0x66,0x00,0x00,
+0x00,0x08,0x28,0xc0,0x00,0xab,0x10,0x21,0xac,0x4c,0x00,0x00,0x8c,0xe4,0x02,0xb8,
+0x27,0x82,0x8f,0xf4,0x00,0xa8,0x28,0x21,0x00,0x04,0x18,0xc0,0x00,0x64,0x18,0x21,
+0x00,0x03,0x18,0x80,0x00,0x62,0x10,0x21,0x8c,0x46,0x00,0x18,0x27,0x84,0x90,0x00,
+0x00,0x64,0x18,0x21,0x8c,0xc2,0x00,0x00,0x80,0x67,0x00,0x06,0x00,0x05,0x28,0x80,
+0x30,0x42,0xff,0xff,0x00,0x47,0x10,0x21,0x30,0x43,0x00,0xff,0x00,0x03,0x18,0x2b,
+0x00,0x02,0x12,0x02,0x00,0x43,0x10,0x21,0x3c,0x04,0x00,0x04,0x00,0xa9,0x28,0x21,
+0x00,0x44,0x10,0x25,0xa4,0xac,0x00,0x00,0xad,0x42,0x00,0x00,0xa7,0x88,0x8f,0xe0,
+0x8f,0xbf,0x00,0x10,0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x18,
+0x84,0xe3,0x00,0x06,0x27,0x82,0xb3,0xf0,0x94,0xe5,0x02,0xba,0x00,0x03,0x18,0x80,
+0x00,0x62,0x18,0x21,0x8c,0x64,0x00,0x00,0x0c,0x00,0x1a,0x95,0x00,0x00,0x00,0x00,
+0x08,0x00,0x1b,0x18,0x00,0x00,0x00,0x00,0x94,0x88,0x00,0x00,0x00,0x80,0x58,0x21,
+0x27,0x8a,0x8f,0xf0,0x00,0x08,0x18,0xc0,0x00,0x68,0x18,0x21,0x3c,0x04,0xb0,0x03,
+0x00,0x03,0x18,0x80,0x3c,0x02,0x80,0x00,0x00,0x6a,0x18,0x21,0x34,0x84,0x00,0x20,
+0x24,0x42,0x6c,0x98,0x30,0xa5,0xff,0xff,0xac,0x82,0x00,0x00,0x94,0x67,0x00,0x02,
+0x11,0x05,0x00,0x35,0x24,0x04,0x00,0x01,0x91,0x66,0x00,0x04,0x00,0x00,0x00,0x00,
+0x00,0x86,0x10,0x2a,0x10,0x40,0x00,0x10,0x00,0xc0,0x48,0x21,0x3c,0x0d,0xb0,0x03,
+0x01,0x40,0x60,0x21,0x35,0xad,0x00,0x20,0x10,0xe5,0x00,0x0d,0x24,0x84,0x00,0x01,
+0x00,0x07,0x10,0xc0,0x00,0x47,0x10,0x21,0x00,0x02,0x10,0x80,0x01,0x20,0x30,0x21,
+0x00,0x4a,0x10,0x21,0x00,0x86,0x18,0x2a,0x00,0xe0,0x40,0x21,0x94,0x47,0x00,0x02,
+0x14,0x60,0xff,0xf5,0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,0x00,0x00,0x10,0x21,
+0x00,0x08,0x20,0xc0,0x00,0x88,0x20,0x21,0x24,0xc2,0xff,0xff,0x00,0x04,0x20,0x80,
+0xa1,0x62,0x00,0x04,0x00,0x8c,0x20,0x21,0x94,0x83,0x00,0x04,0x00,0x07,0x10,0xc0,
+0x00,0x47,0x10,0x21,0x00,0x02,0x10,0x80,0x00,0x4c,0x10,0x21,0x00,0x03,0x28,0xc0,
+0x94,0x46,0x00,0x02,0x00,0xa3,0x18,0x21,0x00,0x03,0x18,0x80,0x00,0x6c,0x18,0x21,
+0xa4,0x66,0x00,0x00,0xa4,0x86,0x00,0x02,0x95,0x64,0x00,0x02,0x3c,0x03,0xb0,0x08,
+0x3c,0x02,0x80,0x01,0x00,0xa3,0x28,0x21,0x24,0x42,0x82,0xe4,0xad,0xa2,0x00,0x00,
+0x10,0x87,0x00,0x03,0xac,0xa6,0x00,0x00,0x03,0xe0,0x00,0x08,0x24,0x02,0x00,0x01,
+0x08,0x00,0x1b,0x66,0xa5,0x68,0x00,0x02,0x91,0x62,0x00,0x04,0xa5,0x67,0x00,0x00,
+0x24,0x42,0xff,0xff,0x30,0x43,0x00,0xff,0x14,0x60,0x00,0x03,0xa1,0x62,0x00,0x04,
+0x24,0x02,0xff,0xff,0xa5,0x62,0x00,0x02,0x91,0x65,0x00,0x04,0x00,0x00,0x00,0x00,
+0x10,0xa0,0xff,0xf1,0x00,0x00,0x00,0x00,0x95,0x66,0x00,0x00,0x34,0x02,0xff,0xff,
+0x14,0xc2,0xff,0xed,0x3c,0x03,0xb0,0x03,0x95,0x64,0x00,0x02,0x3c,0x02,0xee,0xee,
+0x00,0xa2,0x10,0x25,0x34,0x63,0x00,0xbc,0xac,0x62,0x00,0x00,0x10,0x86,0xff,0xe6,
+0xa1,0x60,0x00,0x04,0x24,0x02,0xff,0xff,0x08,0x00,0x1b,0x66,0xa5,0x62,0x00,0x02,
+0x00,0x05,0x40,0xc0,0x01,0x05,0x30,0x21,0x27,0xbd,0xff,0xd8,0x00,0x06,0x30,0x80,
+0x27,0x82,0x8f,0xf4,0xaf,0xb2,0x00,0x18,0xaf,0xb1,0x00,0x14,0xaf,0xbf,0x00,0x20,
+0xaf,0xb3,0x00,0x1c,0xaf,0xb0,0x00,0x10,0x00,0xc2,0x10,0x21,0x8c,0x47,0x00,0x18,
+0x00,0xa0,0x90,0x21,0x3c,0x02,0x80,0x00,0x3c,0x05,0xb0,0x03,0x34,0xa5,0x00,0x20,
+0x24,0x42,0x6e,0x10,0xac,0xa2,0x00,0x00,0x27,0x83,0x90,0x00,0x00,0xc3,0x30,0x21,
+0x8c,0xe2,0x00,0x00,0x80,0xc5,0x00,0x06,0x00,0x80,0x88,0x21,0x30,0x42,0xff,0xff,
+0x00,0x45,0x10,0x21,0x30,0x43,0x00,0xff,0x10,0x60,0x00,0x02,0x00,0x02,0x12,0x02,
+0x24,0x42,0x00,0x01,0x30,0x53,0x00,0xff,0x01,0x12,0x10,0x21,0x00,0x02,0x10,0x80,
+0x27,0x83,0x90,0x00,0x00,0x43,0x10,0x21,0x80,0x44,0x00,0x07,0x00,0x00,0x00,0x00,
+0x10,0x80,0x00,0x4b,0x26,0x24,0x00,0x06,0x32,0x50,0xff,0xff,0x02,0x20,0x20,0x21,
+0x0c,0x00,0x1b,0x26,0x02,0x00,0x28,0x21,0x92,0x22,0x00,0x10,0x00,0x00,0x00,0x00,
+0x14,0x40,0x00,0x2e,0x3c,0x03,0xb0,0x08,0x3c,0x09,0x80,0x01,0x27,0x88,0x8f,0xf0,
+0xa6,0x32,0x00,0x0c,0x00,0x10,0x20,0xc0,0x00,0x90,0x20,0x21,0x00,0x04,0x20,0x80,
+0x00,0x88,0x20,0x21,0x94,0x82,0x00,0x04,0x3c,0x03,0xb0,0x08,0x3c,0x07,0xb0,0x03,
+0x00,0x02,0x28,0xc0,0x00,0xa2,0x10,0x21,0x00,0x02,0x10,0x80,0x00,0x48,0x10,0x21,
+0x00,0xa3,0x28,0x21,0x25,0x26,0x82,0xe4,0x34,0x03,0xff,0xff,0x34,0xe7,0x00,0x20,
+0xac,0xe6,0x00,0x00,0xa4,0x83,0x00,0x02,0xa4,0x43,0x00,0x00,0xac,0xa3,0x00,0x00,
+0x92,0x22,0x00,0x10,0x92,0x23,0x00,0x0a,0xa6,0x32,0x00,0x0e,0x02,0x62,0x10,0x21,
+0x14,0x60,0x00,0x05,0xa2,0x22,0x00,0x10,0x92,0x22,0x00,0x16,0x00,0x00,0x00,0x00,
+0x30,0x42,0x00,0xfe,0xa2,0x22,0x00,0x16,0x92,0x22,0x00,0x04,0x00,0x00,0x00,0x00,
+0x14,0x40,0x00,0x05,0x00,0x00,0x00,0x00,0x92,0x22,0x00,0x16,0x00,0x00,0x00,0x00,
+0x30,0x42,0x00,0xfd,0xa2,0x22,0x00,0x16,0x8f,0xbf,0x00,0x20,0x7b,0xb2,0x00,0xfc,
+0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x28,0x96,0x22,0x00,0x0e,
+0x27,0x88,0x8f,0xf0,0x00,0x02,0x20,0xc0,0x00,0x82,0x20,0x21,0x00,0x04,0x20,0x80,
+0x00,0x88,0x20,0x21,0x94,0x82,0x00,0x04,0x3c,0x06,0xb0,0x03,0x3c,0x09,0x80,0x01,
+0x00,0x02,0x28,0xc0,0x00,0xa2,0x10,0x21,0x00,0x02,0x10,0x80,0x00,0xa3,0x28,0x21,
+0x00,0x48,0x10,0x21,0x34,0xc6,0x00,0x20,0x25,0x23,0x82,0xe4,0xac,0xc3,0x00,0x00,
+0xa4,0x50,0x00,0x00,0xac,0xb0,0x00,0x00,0x08,0x00,0x1b,0xb5,0xa4,0x90,0x00,0x02,
+0x08,0x00,0x1b,0xac,0x32,0x50,0xff,0xff,0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,
+0x24,0x42,0x6f,0xd8,0x34,0x63,0x00,0x20,0xac,0x62,0x00,0x00,0x90,0x82,0x00,0x04,
+0x97,0xaa,0x00,0x12,0x00,0x80,0x60,0x21,0x30,0xa8,0xff,0xff,0x00,0x4a,0x20,0x23,
+0x34,0x09,0xff,0xff,0x30,0xcf,0xff,0xff,0x30,0xee,0xff,0xff,0x11,0x09,0x00,0x73,
+0xa1,0x84,0x00,0x04,0x00,0x0e,0xc0,0xc0,0x00,0x08,0x10,0xc0,0x00,0x48,0x10,0x21,
+0x03,0x0e,0x20,0x21,0x27,0x8d,0x8f,0xf0,0x00,0x04,0x20,0x80,0x00,0x02,0x10,0x80,
+0x00,0x4d,0x10,0x21,0x00,0x8d,0x20,0x21,0x94,0x86,0x00,0x02,0x94,0x43,0x00,0x04,
+0x3c,0x19,0x80,0x01,0xa4,0x46,0x00,0x02,0x00,0x03,0x28,0xc0,0x00,0xa3,0x18,0x21,
+0x94,0x87,0x00,0x02,0x3c,0x02,0xb0,0x08,0x00,0x03,0x18,0x80,0x00,0xa2,0x28,0x21,
+0x00,0x6d,0x18,0x21,0x27,0x22,0x82,0xe4,0x3c,0x01,0xb0,0x03,0xac,0x22,0x00,0x20,
+0xa4,0x66,0x00,0x00,0x10,0xe9,0x00,0x57,0xac,0xa6,0x00,0x00,0x01,0xe0,0x30,0x21,
+0x11,0x40,0x00,0x1d,0x00,0x00,0x48,0x21,0x01,0x40,0x38,0x21,0x27,0x8b,0x8f,0xf4,
+0x27,0x8a,0x90,0x00,0x00,0x06,0x40,0xc0,0x01,0x06,0x18,0x21,0x00,0x03,0x18,0x80,
+0x00,0x6b,0x10,0x21,0x8c,0x44,0x00,0x18,0x00,0x6a,0x18,0x21,0x80,0x65,0x00,0x06,
+0x8c,0x82,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x42,0xff,0xff,0x00,0x45,0x10,0x21,
+0x30,0x44,0x00,0xff,0x00,0x02,0x12,0x02,0x01,0x22,0x18,0x21,0x24,0x62,0x00,0x01,
+0x14,0x80,0x00,0x02,0x30,0x49,0x00,0xff,0x30,0x69,0x00,0xff,0x01,0x06,0x10,0x21,
+0x00,0x02,0x10,0x80,0x00,0x4d,0x10,0x21,0x24,0xe7,0xff,0xff,0x94,0x46,0x00,0x02,
+0x14,0xe0,0xff,0xe9,0x00,0x06,0x40,0xc0,0x91,0x82,0x00,0x10,0x00,0x00,0x00,0x00,
+0x14,0x40,0x00,0x20,0x3c,0x06,0xb0,0x03,0xa5,0x8f,0x00,0x0c,0x03,0x0e,0x20,0x21,
+0x00,0x04,0x20,0x80,0x00,0x8d,0x20,0x21,0x94,0x82,0x00,0x04,0x3c,0x03,0xb0,0x08,
+0x3c,0x07,0xb0,0x03,0x00,0x02,0x28,0xc0,0x00,0xa2,0x10,0x21,0x00,0x02,0x10,0x80,
+0x00,0x4d,0x10,0x21,0x00,0xa3,0x28,0x21,0x27,0x26,0x82,0xe4,0x34,0x03,0xff,0xff,
+0x34,0xe7,0x00,0x20,0xac,0xe6,0x00,0x00,0xa4,0x83,0x00,0x02,0xa4,0x43,0x00,0x00,
+0xac,0xa3,0x00,0x00,0x91,0x82,0x00,0x10,0x91,0x83,0x00,0x04,0xa5,0x8e,0x00,0x0e,
+0x01,0x22,0x10,0x21,0x14,0x60,0x00,0x05,0xa1,0x82,0x00,0x10,0x91,0x82,0x00,0x16,
+0x00,0x00,0x00,0x00,0x30,0x42,0x00,0xfd,0xa1,0x82,0x00,0x16,0x03,0xe0,0x00,0x08,
+0x00,0x00,0x00,0x00,0x95,0x82,0x00,0x0e,0x3c,0x03,0xb0,0x08,0x00,0x02,0x20,0xc0,
+0x00,0x82,0x20,0x21,0x00,0x04,0x20,0x80,0x00,0x8d,0x20,0x21,0x94,0x82,0x00,0x04,
+0x34,0xc6,0x00,0x20,0x27,0x27,0x82,0xe4,0x00,0x02,0x28,0xc0,0x00,0xa2,0x10,0x21,
+0x00,0x02,0x10,0x80,0x00,0xa3,0x28,0x21,0x00,0x4d,0x10,0x21,0xac,0xc7,0x00,0x00,
+0xa4,0x8f,0x00,0x02,0xa4,0x4f,0x00,0x00,0xac,0xaf,0x00,0x00,0x08,0x00,0x1c,0x44,
+0x03,0x0e,0x20,0x21,0x08,0x00,0x1c,0x1f,0xa5,0x88,0x00,0x02,0x00,0x0e,0xc0,0xc0,
+0x03,0x0e,0x10,0x21,0x00,0x02,0x10,0x80,0x27,0x8d,0x8f,0xf0,0x00,0x4d,0x10,0x21,
+0x94,0x43,0x00,0x02,0x30,0x84,0x00,0xff,0x14,0x80,0x00,0x05,0xa5,0x83,0x00,0x00,
+0x24,0x02,0xff,0xff,0x3c,0x19,0x80,0x01,0x08,0x00,0x1c,0x1f,0xa5,0x82,0x00,0x02,
+0x08,0x00,0x1c,0x1f,0x3c,0x19,0x80,0x01,0x3c,0x08,0xb0,0x03,0x3c,0x02,0x80,0x00,
+0x27,0xbd,0xff,0x78,0x35,0x08,0x00,0x20,0x24,0x42,0x72,0x18,0xaf,0xb2,0x00,0x68,
+0xaf,0xb1,0x00,0x64,0xaf,0xb0,0x00,0x60,0xad,0x02,0x00,0x00,0xaf,0xbf,0x00,0x84,
+0xaf,0xbe,0x00,0x80,0xaf,0xb7,0x00,0x7c,0xaf,0xb6,0x00,0x78,0xaf,0xb5,0x00,0x74,
+0xaf,0xb4,0x00,0x70,0xaf,0xb3,0x00,0x6c,0xaf,0xa4,0x00,0x88,0x90,0x83,0x00,0x0a,
+0x27,0x82,0xb3,0xf0,0xaf,0xa6,0x00,0x90,0x00,0x03,0x18,0x80,0x00,0x62,0x18,0x21,
+0x8c,0x63,0x00,0x00,0xaf,0xa7,0x00,0x94,0x27,0x86,0x8f,0xf4,0xaf,0xa3,0x00,0x1c,
+0x94,0x63,0x00,0x14,0x30,0xb1,0xff,0xff,0x24,0x08,0x00,0x01,0x00,0x03,0x20,0xc0,
+0xaf,0xa3,0x00,0x18,0x00,0x83,0x18,0x21,0xaf,0xa4,0x00,0x54,0x00,0x03,0x18,0x80,
+0x27,0x84,0x90,0x00,0x00,0x64,0x20,0x21,0x80,0x82,0x00,0x06,0x00,0x66,0x18,0x21,
+0x8c,0x66,0x00,0x18,0x24,0x42,0x00,0x02,0x00,0x02,0x1f,0xc2,0x8c,0xc4,0x00,0x08,
+0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x43,0x00,0x02,0x10,0x40,0x00,0x04,0x2f,0xc2,
+0x00,0x04,0x1c,0x82,0x00,0xc2,0x38,0x21,0x00,0x04,0x24,0x42,0x8f,0xa2,0x00,0x1c,
+0x30,0x63,0x00,0x01,0x30,0x84,0x00,0x01,0xaf,0xa5,0x00,0x3c,0xaf,0xa3,0x00,0x34,
+0xaf,0xa4,0x00,0x38,0xaf,0xa0,0x00,0x40,0xaf,0xa0,0x00,0x44,0xaf,0xa0,0x00,0x50,
+0xaf,0xa8,0x00,0x20,0x80,0x42,0x00,0x12,0x8f,0xb2,0x00,0x18,0xaf,0xa2,0x00,0x28,
+0x8c,0xd0,0x00,0x0c,0x14,0xa0,0x01,0xe4,0x00,0x60,0x30,0x21,0x00,0x10,0x10,0x82,
+0x30,0x45,0x00,0x07,0x10,0xa0,0x00,0x11,0xaf,0xa0,0x00,0x30,0x8f,0xa4,0x00,0x98,
+0x27,0x82,0x80,0x1c,0x00,0x04,0x18,0x40,0x00,0x62,0x18,0x21,0x24,0xa2,0x00,0x06,
+0x8f,0xa5,0x00,0x20,0x94,0x64,0x00,0x00,0x00,0x45,0x10,0x04,0x00,0x44,0x00,0x1a,
+0x14,0x80,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x07,0x00,0x0d,0x00,0x00,0x10,0x12,
+0x24,0x42,0x00,0x20,0x30,0x42,0xff,0xfc,0xaf,0xa2,0x00,0x30,0x8f,0xa3,0x00,0x18,
+0x8f,0xa4,0x00,0x28,0x34,0x02,0xff,0xff,0xaf,0xa0,0x00,0x2c,0xaf,0xa2,0x00,0x48,
+0xaf,0xa3,0x00,0x4c,0x00,0x60,0xf0,0x21,0x00,0x00,0xb8,0x21,0x18,0x80,0x00,0x48,
+0xaf,0xa0,0x00,0x24,0x00,0x11,0x89,0x02,0xaf,0xb1,0x00,0x58,0x00,0x80,0xa8,0x21,
+0x00,0x12,0x10,0xc0,0x00,0x52,0x18,0x21,0x00,0x03,0x80,0x80,0x27,0x85,0x8f,0xf0,
+0x02,0x40,0x20,0x21,0x00,0x40,0xa0,0x21,0x02,0x05,0x10,0x21,0x94,0x56,0x00,0x02,
+0x0c,0x00,0x12,0x87,0x00,0x00,0x28,0x21,0x90,0x42,0x00,0x00,0x24,0x03,0x00,0x08,
+0x30,0x42,0x00,0x0c,0x10,0x43,0x01,0x9e,0x24,0x04,0x00,0x01,0x24,0x02,0x00,0x01,
+0x10,0x82,0x01,0x7c,0x3c,0x02,0xb0,0x03,0x8f,0xa6,0x00,0x88,0x34,0x42,0x01,0x04,
+0x84,0xc5,0x00,0x0c,0x02,0x92,0x18,0x21,0x94,0x46,0x00,0x00,0x00,0x05,0x20,0xc0,
+0x00,0x85,0x20,0x21,0x00,0x03,0x18,0x80,0x27,0x82,0x90,0x00,0x27,0x85,0x8f,0xf8,
+0x00,0x65,0x28,0x21,0x00,0x62,0x18,0x21,0x80,0x71,0x00,0x05,0x80,0x73,0x00,0x04,
+0x8f,0xa3,0x00,0x88,0x30,0xd0,0xff,0xff,0x00,0x10,0x3a,0x03,0x32,0x08,0x00,0xff,
+0x27,0x82,0x90,0x10,0x00,0x04,0x20,0x80,0x80,0xa6,0x00,0x06,0x00,0x82,0x20,0x21,
+0xa4,0x67,0x00,0x44,0xa4,0x68,0x00,0x46,0x8c,0x84,0x00,0x00,0x38,0xc6,0x00,0x00,
+0x01,0x00,0x80,0x21,0x00,0x04,0x15,0x02,0x30,0x42,0x00,0x01,0x10,0x40,0x00,0x03,
+0x00,0xe6,0x80,0x0a,0x00,0x04,0x14,0x02,0x30,0x50,0x00,0x0f,0x12,0x20,0x01,0x50,
+0x02,0x40,0x20,0x21,0x02,0x71,0x10,0x21,0x00,0x50,0x10,0x2a,0x14,0x40,0x00,0xed,
+0x02,0x92,0x10,0x21,0x93,0x82,0x8b,0x61,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x01,
+0x14,0x40,0x00,0xe0,0x02,0x92,0x28,0x21,0x26,0xe2,0x00,0x01,0x30,0x57,0xff,0xff,
+0x02,0x40,0xf0,0x21,0x26,0xb5,0xff,0xff,0x16,0xa0,0xff,0xbd,0x02,0xc0,0x90,0x21,
+0x16,0xe0,0x00,0xd0,0x00,0x00,0x00,0x00,0x8f,0xa3,0x00,0x98,0x00,0x00,0x00,0x00,
+0x2c,0x62,0x00,0x10,0x10,0x40,0x00,0x2e,0x00,0x00,0x00,0x00,0x8f,0xa4,0x00,0x24,
+0x00,0x00,0x00,0x00,0x18,0x80,0x00,0x2a,0x24,0x03,0x00,0x01,0x8f,0xa5,0x00,0x1c,
+0x27,0x84,0x8f,0xf4,0x94,0xb2,0x00,0x14,0xa0,0xa3,0x00,0x12,0x8f,0xa6,0x00,0x3c,
+0x00,0x12,0x10,0xc0,0x00,0x52,0x10,0x21,0x00,0x02,0x80,0x80,0x27,0x82,0x90,0x00,
+0x02,0x02,0x10,0x21,0x80,0x43,0x00,0x06,0x02,0x04,0x20,0x21,0x8c,0x85,0x00,0x18,
+0x24,0x63,0x00,0x02,0x00,0x03,0x17,0xc2,0x00,0x62,0x18,0x21,0x00,0x03,0x18,0x43,
+0x00,0x03,0x18,0x40,0x14,0xc0,0x00,0x0e,0x00,0xa3,0x38,0x21,0x27,0x82,0x8f,0xf0,
+0x02,0x02,0x10,0x21,0x94,0x43,0x00,0x06,0x8f,0xa8,0x00,0x1c,0x24,0x02,0x00,0x01,
+0xa5,0x03,0x00,0x1a,0x7b,0xbe,0x04,0x3c,0x7b,0xb6,0x03,0xfc,0x7b,0xb4,0x03,0xbc,
+0x7b,0xb2,0x03,0x7c,0x7b,0xb0,0x03,0x3c,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x88,
+0x8f,0xa4,0x00,0x98,0x8f,0xa5,0x00,0x38,0x8f,0xa6,0x00,0x34,0xaf,0xa0,0x00,0x10,
+0x0c,0x00,0x09,0x06,0xaf,0xa0,0x00,0x14,0x08,0x00,0x1d,0x4b,0x00,0x00,0x00,0x00,
+0x8f,0xa3,0x00,0x44,0x93,0x82,0x81,0x59,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x61,
+0x30,0x69,0x00,0x03,0x8f,0xa4,0x00,0x24,0x8f,0xa5,0x00,0x28,0x00,0x00,0x00,0x00,
+0x00,0x85,0x10,0x2a,0x10,0x40,0x00,0x8f,0x00,0x00,0x00,0x00,0x8f,0xa6,0x00,0x1c,
+0x00,0x00,0x00,0x00,0x90,0xc4,0x00,0x04,0x00,0x00,0x00,0x00,0x30,0x83,0x00,0xff,
+0x00,0xa3,0x10,0x2a,0x10,0x40,0x00,0x87,0x00,0x00,0x00,0x00,0x8f,0xa8,0x00,0x24,
+0x00,0x00,0x00,0x00,0x11,0x00,0x00,0x83,0x00,0x65,0x10,0x23,0x00,0xa8,0x18,0x23,
+0x00,0x62,0x10,0x2a,0x14,0x40,0x00,0x7d,0x30,0x63,0x00,0xff,0x00,0x85,0x10,0x23,
+0x30,0x42,0x00,0xff,0xaf,0xa2,0x00,0x50,0x8f,0xa2,0x00,0x50,0x00,0x00,0x00,0x00,
+0x10,0x40,0x00,0x73,0x00,0x00,0xa8,0x21,0x27,0x8c,0x8f,0xf0,0x3c,0x0b,0x80,0xff,
+0x24,0x10,0x00,0x04,0x27,0x91,0x8f,0xf4,0x35,0x6b,0xff,0xff,0x3c,0x0d,0x7f,0x00,
+0x27,0x8e,0x90,0x00,0x01,0x80,0x78,0x21,0x00,0x12,0x30,0xc0,0x00,0xd2,0x10,0x21,
+0x00,0x02,0x10,0x80,0x00,0x4c,0x10,0x21,0x94,0x42,0x00,0x06,0x8f,0xa3,0x00,0x2c,
+0x8f,0xa4,0x00,0x30,0xaf,0xa2,0x00,0x44,0x8f,0xa5,0x00,0x44,0x30,0x49,0x00,0x03,
+0x02,0x09,0x10,0x23,0x30,0x42,0x00,0x03,0x00,0xa2,0x10,0x21,0x8f,0xa8,0x00,0x30,
+0x24,0x42,0x00,0x04,0x30,0x42,0xff,0xff,0x00,0x64,0x38,0x21,0x01,0x02,0x28,0x23,
+0x00,0x62,0x18,0x21,0x00,0x48,0x10,0x2b,0x10,0x40,0x00,0x52,0x00,0x00,0x20,0x21,
+0x30,0xe7,0xff,0xff,0x30,0xa4,0xff,0xff,0xaf,0xa7,0x00,0x2c,0x00,0xd2,0x10,0x21,
+0x00,0x02,0x10,0x80,0x00,0x51,0x18,0x21,0x8c,0x65,0x00,0x18,0x00,0x04,0x25,0x40,
+0x00,0x8d,0x20,0x24,0x8c,0xa8,0x00,0x04,0x00,0x4e,0x18,0x21,0x00,0x4f,0x50,0x21,
+0x01,0x0b,0x40,0x24,0x01,0x04,0x40,0x25,0xac,0xa8,0x00,0x04,0x8f,0xa4,0x00,0x98,
+0x8f,0xa2,0x00,0x50,0x26,0xb5,0x00,0x01,0xa0,0x64,0x00,0x00,0x8c,0xa4,0x00,0x08,
+0x00,0x00,0x00,0x00,0x04,0x81,0x00,0x0c,0x02,0xa2,0x30,0x2a,0x80,0x62,0x00,0x06,
+0x00,0x00,0x00,0x00,0x24,0x42,0x00,0x02,0x00,0x02,0x1f,0xc2,0x00,0x43,0x10,0x21,
+0x00,0x02,0x10,0x43,0x00,0x02,0x10,0x40,0x00,0xa2,0x38,0x21,0x8f,0xa5,0x00,0x40,
+0x00,0x00,0x00,0x00,0xa4,0xe5,0x00,0x00,0x95,0x52,0x00,0x02,0x14,0xc0,0xff,0xc7,
+0x00,0x12,0x30,0xc0,0x8f,0xa4,0x00,0x24,0x8f,0xa5,0x00,0x50,0x8f,0xa6,0x00,0x1c,
+0x8f,0xa3,0x00,0x2c,0x00,0x85,0x80,0x21,0xa0,0xd0,0x00,0x12,0x00,0x09,0x10,0x23,
+0x30,0x42,0x00,0x03,0x8f,0xa8,0x00,0x88,0x00,0x62,0x10,0x23,0xa4,0xc2,0x00,0x1a,
+0x85,0x03,0x00,0x0c,0x00,0x00,0x00,0x00,0x00,0x03,0x10,0xc0,0x00,0x43,0x10,0x21,
+0x00,0x02,0x10,0x80,0x27,0x83,0x8f,0xf4,0x00,0x43,0x10,0x21,0x8c,0x44,0x00,0x18,
+0x00,0x00,0x00,0x00,0x8c,0x83,0x00,0x04,0x00,0x00,0x00,0x00,0x30,0x63,0x00,0x10,
+0x14,0x60,0xff,0x74,0x02,0x00,0x10,0x21,0x8f,0xa3,0x00,0x54,0x8f,0xa4,0x00,0x18,
+0x8f,0xa5,0x00,0x24,0x00,0x64,0x10,0x21,0x00,0x02,0x10,0x80,0x27,0x83,0x90,0x08,
+0x00,0x43,0x10,0x21,0x90,0x44,0x00,0x00,0x10,0xa0,0x00,0x03,0x00,0x00,0x30,0x21,
+0x08,0x00,0x1d,0x51,0x02,0x00,0x10,0x21,0x93,0x82,0x80,0x10,0x00,0x00,0x28,0x21,
+0x00,0x00,0x38,0x21,0x0c,0x00,0x21,0xf5,0xaf,0xa2,0x00,0x10,0x08,0x00,0x1d,0x51,
+0x02,0x00,0x10,0x21,0x30,0x63,0xff,0xff,0x08,0x00,0x1d,0xa3,0xaf,0xa3,0x00,0x2c,
+0x8f,0xa8,0x00,0x44,0x08,0x00,0x1d,0xc5,0x31,0x09,0x00,0x03,0x08,0x00,0x1d,0x7e,
+0xaf,0xa3,0x00,0x50,0x8f,0xa6,0x00,0x44,0xaf,0xa0,0x00,0x50,0x08,0x00,0x1d,0xc5,
+0x30,0xc9,0x00,0x03,0x8f,0xa5,0x00,0x48,0x8f,0xa6,0x00,0x4c,0x8f,0xa4,0x00,0x1c,
+0x03,0xc0,0x38,0x21,0x0c,0x00,0x1b,0xf6,0xaf,0xb7,0x00,0x10,0x08,0x00,0x1d,0x2e,
+0x00,0x00,0x00,0x00,0x00,0x05,0x28,0x80,0x27,0x82,0x8f,0xf0,0x00,0xa2,0x28,0x21,
+0x00,0x00,0x20,0x21,0x0c,0x00,0x01,0x4b,0x00,0x00,0x00,0x00,0x08,0x00,0x1d,0x27,
+0x26,0xe2,0x00,0x01,0x00,0x02,0x80,0x80,0x27,0x83,0x90,0x00,0x8f,0xa4,0x00,0x1c,
+0x02,0x03,0x18,0x21,0x26,0x31,0x00,0x01,0x02,0x40,0x28,0x21,0x0c,0x00,0x1f,0x08,
+0xa0,0x71,0x00,0x05,0x14,0x40,0xff,0x13,0x00,0x00,0x00,0x00,0x16,0xe0,0x00,0x4d,
+0x03,0xc0,0x38,0x21,0x8f,0xa4,0x00,0x24,0x8f,0xa5,0x00,0x20,0x24,0x02,0x00,0x01,
+0x24,0x84,0x00,0x01,0xaf,0xb2,0x00,0x48,0xaf,0xb6,0x00,0x4c,0x02,0xc0,0xf0,0x21,
+0x10,0xa2,0x00,0x41,0xaf,0xa4,0x00,0x24,0x27,0x82,0x8f,0xf0,0x02,0x02,0x10,0x21,
+0x94,0x42,0x00,0x06,0x8f,0xa4,0x00,0x30,0xaf,0xa0,0x00,0x20,0xaf,0xa2,0x00,0x44,
+0x30,0x49,0x00,0x03,0x8f,0xa8,0x00,0x44,0x00,0x09,0x10,0x23,0x30,0x42,0x00,0x03,
+0x01,0x02,0x10,0x21,0x24,0x42,0x00,0x04,0x30,0x42,0xff,0xff,0x00,0x44,0x18,0x2b,
+0x10,0x60,0x00,0x2b,0x00,0x00,0x00,0x00,0x8f,0xa5,0x00,0x2c,0x00,0x82,0x10,0x23,
+0x00,0xa4,0x18,0x21,0x30,0x63,0xff,0xff,0x30,0x44,0xff,0xff,0xaf,0xa3,0x00,0x2c,
+0x02,0x92,0x28,0x21,0x00,0x05,0x28,0x80,0x27,0x82,0x8f,0xf4,0x00,0xa2,0x10,0x21,
+0x8c,0x46,0x00,0x18,0x3c,0x03,0x80,0xff,0x3c,0x02,0x7f,0x00,0x8c,0xc8,0x00,0x04,
+0x00,0x04,0x25,0x40,0x34,0x63,0xff,0xff,0x00,0x82,0x20,0x24,0x01,0x03,0x40,0x24,
+0x01,0x04,0x40,0x25,0xac,0xc8,0x00,0x04,0x8f,0xa8,0x00,0x98,0x27,0x82,0x90,0x00,
+0x00,0xa2,0x10,0x21,0xa0,0x48,0x00,0x00,0x8c,0xc4,0x00,0x08,0x00,0x00,0x00,0x00,
+0x00,0x04,0x27,0xc2,0x10,0x80,0xfe,0xdb,0xaf,0xa4,0x00,0x3c,0x80,0x42,0x00,0x06,
+0x00,0x00,0x00,0x00,0x24,0x42,0x00,0x02,0x00,0x02,0x1f,0xc2,0x00,0x43,0x10,0x21,
+0x00,0x02,0x10,0x43,0x00,0x02,0x10,0x40,0x00,0xc2,0x38,0x21,0x8f,0xa2,0x00,0x40,
+0x00,0x00,0x00,0x00,0xa4,0xe2,0x00,0x00,0x08,0x00,0x1d,0x2a,0x26,0xb5,0xff,0xff,
+0x8f,0xa6,0x00,0x2c,0x00,0x00,0x20,0x21,0x00,0xc2,0x10,0x21,0x30,0x42,0xff,0xff,
+0x08,0x00,0x1e,0x38,0xaf,0xa2,0x00,0x2c,0x8f,0xa6,0x00,0x1c,0x08,0x00,0x1e,0x22,
+0xa4,0xd2,0x00,0x14,0x8f,0xa5,0x00,0x48,0x8f,0xa6,0x00,0x4c,0x8f,0xa4,0x00,0x1c,
+0x0c,0x00,0x1b,0xf6,0xaf,0xb7,0x00,0x10,0x08,0x00,0x1e,0x19,0x00,0x00,0xb8,0x21,
+0x0c,0x00,0x12,0x87,0x00,0x00,0x28,0x21,0x00,0x40,0x18,0x21,0x94,0x42,0x00,0x00,
+0x00,0x00,0x00,0x00,0x34,0x42,0x08,0x00,0xa4,0x62,0x00,0x00,0x08,0x00,0x1d,0x1e,
+0x02,0x71,0x10,0x21,0x02,0x92,0x18,0x21,0x00,0x03,0x80,0x80,0x27,0x82,0x8f,0xf4,
+0x02,0x02,0x10,0x21,0x8c,0x44,0x00,0x18,0x00,0x00,0x00,0x00,0x8c,0x83,0x00,0x04,
+0x00,0x00,0x00,0x00,0x30,0x63,0x00,0x10,0x10,0x60,0x00,0x09,0x24,0x06,0x00,0x01,
+0x93,0x82,0x8b,0x61,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x01,0x10,0x40,0xfe,0xa2,
+0x3c,0x04,0x00,0x80,0x27,0x85,0x8f,0xf0,0x08,0x00,0x1e,0x09,0x02,0x05,0x28,0x21,
+0x27,0x83,0x90,0x08,0x27,0x82,0x90,0x00,0x02,0x03,0x18,0x21,0x02,0x02,0x10,0x21,
+0x90,0x64,0x00,0x00,0x90,0x45,0x00,0x05,0x93,0x83,0x80,0x10,0x00,0x00,0x38,0x21,
+0x0c,0x00,0x21,0xf5,0xaf,0xa3,0x00,0x10,0x08,0x00,0x1e,0x80,0x00,0x00,0x00,0x00,
+0x27,0x82,0x90,0x08,0x02,0x02,0x10,0x21,0x94,0x43,0x00,0x02,0x8f,0xa6,0x00,0x58,
+0x00,0x03,0x19,0x02,0x00,0x66,0x18,0x23,0x30,0x63,0x0f,0xff,0x28,0x62,0x00,0x20,
+0x10,0x40,0x00,0x06,0x28,0x62,0x00,0x40,0x8f,0xa8,0x00,0x90,0x00,0x00,0x00,0x00,
+0x00,0x68,0x10,0x06,0x08,0x00,0x1c,0xf7,0x30,0x44,0x00,0x01,0x10,0x40,0x00,0x04,
+0x00,0x00,0x00,0x00,0x8f,0xa4,0x00,0x94,0x08,0x00,0x1e,0xa1,0x00,0x64,0x10,0x06,
+0x08,0x00,0x1c,0xf7,0x00,0x00,0x20,0x21,0x8f,0xa4,0x00,0x98,0x8f,0xa5,0x00,0x38,
+0xaf,0xa0,0x00,0x10,0x0c,0x00,0x09,0x06,0xaf,0xa8,0x00,0x14,0x30,0x42,0xff,0xff,
+0x08,0x00,0x1c,0xc7,0xaf,0xa2,0x00,0x40,0x3c,0x02,0xb0,0x03,0x3c,0x03,0x80,0x00,
+0x27,0xbd,0xff,0xe0,0x34,0x42,0x00,0x20,0x24,0x63,0x7a,0xc8,0xaf,0xb1,0x00,0x14,
+0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x18,0xac,0x43,0x00,0x00,0x90,0x82,0x00,0x0a,
+0x00,0x80,0x80,0x21,0x14,0x40,0x00,0x45,0x00,0x00,0x88,0x21,0x92,0x02,0x00,0x04,
+0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x3c,0x00,0x00,0x00,0x00,0x12,0x20,0x00,0x18,
+0x00,0x00,0x00,0x00,0x92,0x02,0x00,0x16,0x92,0x05,0x00,0x0a,0x30,0x42,0x00,0xfc,
+0x10,0xa0,0x00,0x03,0xa2,0x02,0x00,0x16,0x34,0x42,0x00,0x01,0xa2,0x02,0x00,0x16,
+0x92,0x04,0x00,0x04,0x00,0x00,0x00,0x00,0x30,0x83,0x00,0xff,0x10,0x60,0x00,0x05,
+0x00,0x00,0x00,0x00,0x92,0x02,0x00,0x16,0x00,0x00,0x00,0x00,0x34,0x42,0x00,0x02,
+0xa2,0x02,0x00,0x16,0x10,0x60,0x00,0x0a,0x00,0x00,0x00,0x00,0x14,0xa0,0x00,0x08,
+0x00,0x00,0x00,0x00,0x96,0x02,0x00,0x00,0xa2,0x00,0x00,0x17,0xa6,0x02,0x00,0x14,
+0x8f,0xbf,0x00,0x18,0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x20,
+0x14,0x80,0x00,0x05,0x24,0x02,0x00,0x01,0x96,0x03,0x00,0x06,0xa2,0x02,0x00,0x17,
+0x08,0x00,0x1e,0xdc,0xa6,0x03,0x00,0x14,0x96,0x04,0x00,0x00,0x96,0x05,0x00,0x06,
+0x27,0x86,0x8f,0xf0,0x00,0x04,0x10,0xc0,0x00,0x05,0x18,0xc0,0x00,0x44,0x10,0x21,
+0x00,0x65,0x18,0x21,0x00,0x02,0x10,0x80,0x00,0x03,0x18,0x80,0x00,0x66,0x18,0x21,
+0x00,0x46,0x10,0x21,0x8c,0x65,0x00,0x08,0x8c,0x44,0x00,0x08,0x0c,0x00,0x12,0x78,
+0x00,0x00,0x00,0x00,0x30,0x43,0x00,0xff,0x10,0x60,0x00,0x04,0xa2,0x02,0x00,0x17,
+0x96,0x02,0x00,0x06,0x08,0x00,0x1e,0xdc,0xa6,0x02,0x00,0x14,0x96,0x02,0x00,0x00,
+0x08,0x00,0x1e,0xdc,0xa6,0x02,0x00,0x14,0x96,0x05,0x00,0x00,0x0c,0x00,0x1f,0x08,
+0x02,0x00,0x20,0x21,0x08,0x00,0x1e,0xc3,0x02,0x22,0x88,0x21,0x94,0x85,0x00,0x06,
+0x0c,0x00,0x1f,0x08,0x00,0x00,0x00,0x00,0x08,0x00,0x1e,0xbf,0x00,0x40,0x88,0x21,
+0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,0x34,0x63,0x00,0x20,0x24,0x42,0x7c,0x20,
+0x27,0xbd,0xff,0xf0,0xac,0x62,0x00,0x00,0x00,0x00,0x10,0x21,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x10,0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x00,0x34,0x63,0x00,0x20,
+0x24,0x42,0x7c,0x44,0xac,0x62,0x00,0x00,0x90,0x89,0x00,0x0a,0x00,0x80,0x30,0x21,
+0x11,0x20,0x00,0x05,0x00,0xa0,0x50,0x21,0x90,0x82,0x00,0x17,0x00,0x00,0x00,0x00,
+0x14,0x40,0x00,0x1b,0x00,0x00,0x00,0x00,0x90,0xc7,0x00,0x04,0x00,0x00,0x00,0x00,
+0x10,0xe0,0x00,0x1b,0x00,0x00,0x00,0x00,0x94,0xc8,0x00,0x00,0x27,0x83,0x8f,0xf0,
+0x93,0x85,0x8b,0x60,0x00,0x08,0x10,0xc0,0x00,0x48,0x10,0x21,0x00,0x02,0x10,0x80,
+0x00,0x43,0x10,0x21,0x8c,0x44,0x00,0x08,0x00,0xe5,0x28,0x2b,0x10,0xa0,0x00,0x06,
+0x01,0x44,0x18,0x23,0x8f,0x82,0x8b,0x78,0x00,0x00,0x00,0x00,0x00,0x43,0x10,0x2b,
+0x10,0x40,0x00,0x05,0x00,0x00,0x00,0x00,0x24,0x03,0x00,0x10,0xa4,0xc8,0x00,0x14,
+0x03,0xe0,0x00,0x08,0x00,0x60,0x10,0x21,0x11,0x20,0x00,0x05,0x00,0x00,0x00,0x00,
+0x94,0xc2,0x00,0x06,0x24,0x03,0x00,0x08,0x08,0x00,0x1f,0x34,0xa4,0xc2,0x00,0x14,
+0x08,0x00,0x1f,0x34,0x00,0x00,0x18,0x21,0x27,0xbd,0xff,0xc8,0xaf,0xb5,0x00,0x2c,
+0xaf,0xb4,0x00,0x28,0xaf,0xb3,0x00,0x24,0xaf,0xb0,0x00,0x18,0xaf,0xbf,0x00,0x30,
+0xaf,0xb2,0x00,0x20,0xaf,0xb1,0x00,0x1c,0x94,0x91,0x00,0x06,0x00,0x80,0xa0,0x21,
+0x3c,0x02,0x80,0x00,0x3c,0x04,0xb0,0x03,0x00,0x11,0xa8,0xc0,0x34,0x84,0x00,0x20,
+0x24,0x42,0x7c,0xf8,0x02,0xb1,0x48,0x21,0xac,0x82,0x00,0x00,0x00,0x09,0x48,0x80,
+0x24,0x03,0x00,0x01,0x27,0x82,0x90,0x00,0xa2,0x83,0x00,0x12,0x01,0x22,0x10,0x21,
+0x27,0x84,0x8f,0xf4,0x01,0x24,0x20,0x21,0x80,0x48,0x00,0x06,0x8c,0x8a,0x00,0x18,
+0x27,0x83,0x90,0x10,0x01,0x23,0x48,0x21,0x8d,0x24,0x00,0x00,0x25,0x08,0x00,0x02,
+0x8d,0x42,0x00,0x00,0x8d,0x49,0x00,0x04,0x00,0x08,0x17,0xc2,0x8d,0x43,0x00,0x08,
+0x01,0x02,0x40,0x21,0x00,0x04,0x25,0xc2,0x00,0x08,0x40,0x43,0x30,0x84,0x00,0x01,
+0x00,0x03,0x1f,0xc2,0x00,0x08,0x40,0x40,0x00,0xe0,0x80,0x21,0x00,0x64,0x18,0x24,
+0x00,0x09,0x49,0x42,0x01,0x48,0x10,0x21,0x00,0xa0,0x98,0x21,0x00,0xa0,0x20,0x21,
+0x00,0x40,0x38,0x21,0x02,0x00,0x28,0x21,0x14,0x60,0x00,0x19,0x31,0x29,0x00,0x01,
+0x94,0x42,0x00,0x00,0x02,0xb1,0x88,0x21,0x02,0x00,0x28,0x21,0x00,0x11,0x88,0x80,
+0x27,0x90,0x8f,0xf0,0x02,0x30,0x80,0x21,0x96,0x03,0x00,0x06,0x30,0x52,0xff,0xff,
+0x02,0x60,0x20,0x21,0x00,0x60,0x30,0x21,0xa6,0x83,0x00,0x1a,0x27,0x82,0x8f,0xf8,
+0x0c,0x00,0x08,0xdf,0x02,0x22,0x88,0x21,0x00,0x52,0x10,0x21,0x96,0x03,0x00,0x06,
+0xa6,0x22,0x00,0x04,0x8f,0xbf,0x00,0x30,0x7b,0xb4,0x01,0x7c,0x7b,0xb2,0x01,0x3c,
+0x7b,0xb0,0x00,0xfc,0x00,0x60,0x10,0x21,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x38,
+0xaf,0xa9,0x00,0x10,0x0c,0x00,0x09,0x06,0xaf,0xa0,0x00,0x14,0x08,0x00,0x1f,0x72,
+0x02,0xb1,0x88,0x21,0x27,0xbd,0xff,0xc0,0xaf,0xbe,0x00,0x38,0xaf,0xb7,0x00,0x34,
+0xaf,0xb6,0x00,0x30,0xaf,0xb5,0x00,0x2c,0xaf,0xb3,0x00,0x24,0xaf,0xb1,0x00,0x1c,
+0xaf,0xbf,0x00,0x3c,0xaf,0xb4,0x00,0x28,0xaf,0xb2,0x00,0x20,0xaf,0xb0,0x00,0x18,
+0x94,0x90,0x00,0x00,0x3c,0x08,0xb0,0x03,0x35,0x08,0x00,0x20,0x00,0x10,0x10,0xc0,
+0x00,0x50,0x18,0x21,0x00,0x40,0x88,0x21,0x3c,0x02,0x80,0x00,0x00,0x03,0x48,0x80,
+0x24,0x42,0x7e,0x34,0x00,0x80,0x98,0x21,0x27,0x84,0x90,0x00,0x01,0x24,0x20,0x21,
+0x93,0xb7,0x00,0x53,0xad,0x02,0x00,0x00,0x80,0x83,0x00,0x06,0x27,0x82,0x8f,0xf4,
+0x01,0x22,0x10,0x21,0x8c,0x44,0x00,0x18,0x24,0x63,0x00,0x02,0x00,0x03,0x17,0xc2,
+0x8c,0x88,0x00,0x08,0x00,0x62,0x18,0x21,0x00,0x03,0x18,0x43,0x00,0x03,0x18,0x40,
+0xaf,0xa7,0x00,0x4c,0x2c,0xa2,0x00,0x10,0x00,0xa0,0xa8,0x21,0x00,0x83,0x50,0x21,
+0x00,0x08,0x47,0xc2,0x00,0xc0,0x58,0x21,0x00,0x00,0xb0,0x21,0x8c,0x92,0x00,0x0c,
+0x14,0x40,0x00,0x13,0x00,0x00,0xf0,0x21,0x92,0x67,0x00,0x04,0x24,0x14,0x00,0x01,
+0x12,0x87,0x00,0x10,0x02,0x30,0x10,0x21,0x27,0x83,0x90,0x08,0x01,0x23,0x18,0x21,
+0x80,0x64,0x00,0x00,0x27,0x83,0xb5,0x60,0x00,0x04,0x11,0x00,0x00,0x44,0x10,0x23,
+0x00,0x02,0x10,0x80,0x00,0x44,0x10,0x23,0x00,0x02,0x10,0x80,0x00,0x43,0x10,0x21,
+0x90,0x44,0x00,0x04,0x00,0x00,0x00,0x00,0x10,0x80,0x00,0x23,0x00,0x00,0x00,0x00,
+0x02,0x30,0x10,0x21,0x00,0x02,0x80,0x80,0x24,0x04,0x00,0x01,0x27,0x83,0x90,0x10,
+0xa2,0x64,0x00,0x12,0x02,0x03,0x18,0x21,0x8c,0x62,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x02,0x15,0xc2,0x30,0x42,0x00,0x01,0x01,0x02,0x10,0x24,0x14,0x40,0x00,0x0e,
+0x02,0xa0,0x20,0x21,0x27,0x82,0x8f,0xf0,0x02,0x02,0x10,0x21,0x94,0x43,0x00,0x06,
+0x00,0x00,0x00,0x00,0xa6,0x63,0x00,0x1a,0x94,0x42,0x00,0x06,0x7b,0xbe,0x01,0xfc,
+0x7b,0xb6,0x01,0xbc,0x7b,0xb4,0x01,0x7c,0x7b,0xb2,0x01,0x3c,0x7b,0xb0,0x00,0xfc,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x40,0x8f,0xa5,0x00,0x4c,0x01,0x60,0x30,0x21,
+0x01,0x40,0x38,0x21,0xaf,0xa0,0x00,0x10,0x0c,0x00,0x09,0x06,0xaf,0xa0,0x00,0x14,
+0x08,0x00,0x1f,0xd9,0x00,0x00,0x00,0x00,0x27,0x83,0x90,0x10,0x01,0x23,0x18,0x21,
+0x8c,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x15,0xc2,0x30,0x42,0x00,0x01,
+0x01,0x02,0x10,0x24,0x14,0x40,0x00,0xaf,0x00,0xa0,0x20,0x21,0x32,0x4f,0x00,0x03,
+0x00,0x12,0x10,0x82,0x25,0xe3,0x00,0x0d,0x30,0x45,0x00,0x07,0x00,0x74,0x78,0x04,
+0x10,0xa0,0x00,0x0e,0x00,0x00,0x90,0x21,0x27,0x82,0x80,0x1c,0x00,0x15,0x18,0x40,
+0x00,0x62,0x18,0x21,0x94,0x64,0x00,0x00,0x24,0xa2,0x00,0x06,0x00,0x54,0x10,0x04,
+0x00,0x44,0x00,0x1a,0x14,0x80,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x07,0x00,0x0d,
+0x00,0x00,0x10,0x12,0x24,0x42,0x00,0x20,0x30,0x52,0xff,0xfc,0x02,0x30,0x10,0x21,
+0x27,0x83,0x90,0x00,0x00,0x02,0x10,0x80,0x00,0x43,0x10,0x21,0x90,0x44,0x00,0x03,
+0x00,0x00,0x00,0x00,0x30,0x83,0x00,0xff,0x2c,0x62,0x00,0x0c,0x14,0x40,0x00,0x04,
+0x2c,0x62,0x00,0x19,0x30,0x82,0x00,0x0f,0x24,0x43,0x00,0x0c,0x2c,0x62,0x00,0x19,
+0x10,0x40,0x00,0x19,0x24,0x0e,0x00,0x20,0x24,0x62,0xff,0xe9,0x2c,0x42,0x00,0x02,
+0x14,0x40,0x00,0x15,0x24,0x0e,0x00,0x10,0x24,0x62,0xff,0xeb,0x2c,0x42,0x00,0x02,
+0x14,0x40,0x00,0x11,0x24,0x0e,0x00,0x08,0x24,0x02,0x00,0x14,0x10,0x62,0x00,0x0e,
+0x24,0x0e,0x00,0x02,0x24,0x62,0xff,0xef,0x2c,0x42,0x00,0x03,0x14,0x40,0x00,0x0a,
+0x24,0x0e,0x00,0x10,0x24,0x62,0xff,0xf1,0x2c,0x42,0x00,0x02,0x14,0x40,0x00,0x06,
+0x24,0x0e,0x00,0x08,0x24,0x62,0xff,0xf3,0x2c,0x42,0x00,0x02,0x24,0x0e,0x00,0x04,
+0x24,0x03,0x00,0x02,0x00,0x62,0x70,0x0a,0x30,0xe2,0x00,0xff,0x00,0x00,0x48,0x21,
+0x00,0x00,0x68,0x21,0x10,0x40,0x00,0x6d,0x00,0x00,0x58,0x21,0x3c,0x14,0x80,0xff,
+0x27,0x99,0x8f,0xf0,0x01,0xf2,0xc0,0x23,0x36,0x94,0xff,0xff,0x01,0xc9,0x10,0x2a,
+0x14,0x40,0x00,0x64,0x24,0x03,0x00,0x04,0x00,0x10,0x28,0xc0,0x00,0xb0,0x10,0x21,
+0x00,0x02,0x10,0x80,0x00,0x59,0x10,0x21,0x94,0x56,0x00,0x06,0x00,0x00,0x00,0x00,
+0x32,0xcc,0x00,0x03,0x00,0x6c,0x10,0x23,0x30,0x42,0x00,0x03,0x02,0xc2,0x10,0x21,
+0x24,0x42,0x00,0x04,0x30,0x51,0xff,0xff,0x02,0x32,0x18,0x2b,0x10,0x60,0x00,0x4d,
+0x01,0xf1,0x10,0x23,0x02,0x51,0x10,0x23,0x01,0x78,0x18,0x2b,0x10,0x60,0x00,0x34,
+0x30,0x44,0xff,0xff,0x29,0x22,0x00,0x40,0x10,0x40,0x00,0x31,0x01,0x72,0x18,0x21,
+0x25,0x22,0x00,0x01,0x00,0x02,0x16,0x00,0x00,0x02,0x4e,0x03,0x00,0xb0,0x10,0x21,
+0x00,0x02,0x30,0x80,0x27,0x82,0x8f,0xf4,0x30,0x6b,0xff,0xff,0x00,0xc2,0x18,0x21,
+0x8c,0x67,0x00,0x18,0x00,0x04,0x25,0x40,0x3c,0x03,0x7f,0x00,0x8c,0xe2,0x00,0x04,
+0x00,0x83,0x20,0x24,0x27,0x83,0x90,0x00,0x00,0x54,0x10,0x24,0x00,0xc3,0x28,0x21,
+0x00,0x44,0x10,0x25,0xac,0xe2,0x00,0x04,0x16,0xe0,0x00,0x02,0xa0,0xb5,0x00,0x00,
+0xa0,0xb5,0x00,0x03,0x27,0x84,0x90,0x10,0x00,0xc4,0x18,0x21,0x8c,0x62,0x00,0x00,
+0x8c,0xe8,0x00,0x08,0x00,0x02,0x15,0xc2,0x00,0x08,0x47,0xc2,0x30,0x42,0x00,0x01,
+0x01,0x02,0x10,0x24,0x10,0x40,0x00,0x0a,0x00,0x00,0x00,0x00,0x80,0xa2,0x00,0x06,
+0x00,0x00,0x00,0x00,0x24,0x42,0x00,0x02,0x00,0x02,0x1f,0xc2,0x00,0x43,0x10,0x21,
+0x00,0x02,0x10,0x43,0x00,0x02,0x10,0x40,0x00,0xe2,0x50,0x21,0xa5,0x5e,0x00,0x00,
+0x92,0x62,0x00,0x04,0x25,0xad,0x00,0x01,0x27,0x84,0x8f,0xf0,0x00,0xc4,0x18,0x21,
+0x01,0xa2,0x10,0x2a,0x94,0x70,0x00,0x02,0x14,0x40,0xff,0xb8,0x00,0x00,0x00,0x00,
+0x96,0x63,0x00,0x14,0x00,0x0c,0x10,0x23,0xa2,0x69,0x00,0x12,0x30,0x42,0x00,0x03,
+0x01,0x62,0x10,0x23,0x00,0x03,0x80,0xc0,0x8f,0xa5,0x00,0x4c,0x30,0x4b,0xff,0xff,
+0x02,0x03,0x80,0x21,0x27,0x82,0x8f,0xf8,0x00,0x10,0x80,0x80,0xa6,0x6b,0x00,0x1a,
+0x02,0xa0,0x20,0x21,0x01,0x60,0x30,0x21,0x01,0x60,0x88,0x21,0x0c,0x00,0x08,0xdf,
+0x02,0x02,0x80,0x21,0x00,0x5e,0x10,0x21,0xa6,0x02,0x00,0x04,0x08,0x00,0x1f,0xdf,
+0x02,0x20,0x10,0x21,0x01,0x62,0x10,0x2b,0x10,0x40,0xff,0xe9,0x00,0x00,0x20,0x21,
+0x29,0x22,0x00,0x40,0x10,0x40,0xff,0xe6,0x01,0x71,0x18,0x21,0x08,0x00,0x20,0x55,
+0x25,0x22,0x00,0x01,0x08,0x00,0x20,0x84,0x32,0xcc,0x00,0x03,0x08,0x00,0x20,0x84,
+0x00,0x00,0x60,0x21,0x8f,0xa5,0x00,0x4c,0x01,0x40,0x38,0x21,0xaf,0xa0,0x00,0x10,
+0x0c,0x00,0x09,0x06,0xaf,0xb4,0x00,0x14,0x92,0x67,0x00,0x04,0x08,0x00,0x1f,0xf7,
+0x30,0x5e,0xff,0xff,0x30,0x84,0xff,0xff,0x00,0x04,0x30,0xc0,0x00,0xc4,0x20,0x21,
+0x00,0x04,0x20,0x80,0x27,0x82,0x8f,0xf0,0x3c,0x03,0xb0,0x08,0x30,0xa5,0xff,0xff,
+0x00,0x82,0x20,0x21,0x00,0xc3,0x30,0x21,0xac,0xc5,0x00,0x00,0x03,0xe0,0x00,0x08,
+0xa4,0x85,0x00,0x00,0x30,0x84,0xff,0xff,0x00,0x04,0x30,0xc0,0x00,0xc4,0x30,0x21,
+0x27,0x88,0x8f,0xf0,0x00,0x06,0x30,0x80,0x00,0xc8,0x30,0x21,0x94,0xc3,0x00,0x04,
+0x3c,0x02,0xb0,0x08,0x3c,0x07,0xb0,0x03,0x00,0x03,0x20,0xc0,0x00,0x83,0x18,0x21,
+0x00,0x03,0x18,0x80,0x00,0x82,0x20,0x21,0x3c,0x02,0x80,0x01,0x30,0xa5,0xff,0xff,
+0x00,0x68,0x18,0x21,0x34,0xe7,0x00,0x20,0x24,0x42,0x82,0xe4,0xac,0xe2,0x00,0x00,
+0xa4,0xc5,0x00,0x02,0xa4,0x65,0x00,0x00,0x03,0xe0,0x00,0x08,0xac,0x85,0x00,0x00,
+0x3c,0x02,0xb0,0x03,0x3c,0x03,0x80,0x01,0x34,0x42,0x00,0x20,0x24,0x63,0x83,0x40,
+0xac,0x43,0x00,0x00,0x90,0x82,0x00,0x10,0x3c,0x08,0xb0,0x03,0x3c,0x09,0xb0,0x06,
+0x27,0x87,0x8f,0xf0,0x3c,0x0d,0xb0,0x08,0x34,0x0e,0xff,0xff,0x35,0x08,0x00,0x62,
+0x00,0x80,0x30,0x21,0x24,0x0c,0xff,0xff,0x10,0x40,0x00,0x2c,0x35,0x29,0x80,0x20,
+0x97,0x82,0x8f,0xe0,0x94,0x85,0x00,0x0c,0x3c,0x0b,0xb0,0x03,0x00,0x02,0x18,0xc0,
+0x00,0x62,0x10,0x21,0x00,0x02,0x10,0x80,0x00,0x47,0x10,0x21,0xa4,0x45,0x00,0x00,
+0x94,0x84,0x00,0x0e,0x00,0x6d,0x18,0x21,0xac,0x65,0x00,0x00,0x00,0x04,0x10,0xc0,
+0x00,0x44,0x10,0x21,0x00,0x02,0x10,0x80,0x00,0x47,0x10,0x21,0x94,0x45,0x00,0x04,
+0x3c,0x0a,0x77,0x77,0x35,0x6b,0x00,0xb4,0x00,0x05,0x10,0xc0,0x00,0x45,0x18,0x21,
+0x00,0x03,0x18,0x80,0x00,0x67,0x18,0x21,0x00,0x4d,0x10,0x21,0xac,0x4e,0x00,0x00,
+0xa4,0x6e,0x00,0x00,0x95,0x04,0x00,0x00,0x90,0xc3,0x00,0x10,0x24,0x02,0x00,0xff,
+0x00,0x44,0x10,0x23,0x00,0x43,0x10,0x2a,0xa7,0x85,0x8f,0xe0,0x10,0x40,0x00,0x04,
+0x35,0x4a,0x88,0x88,0xad,0x6a,0x00,0x00,0x90,0xc3,0x00,0x10,0x00,0x00,0x00,0x00,
+0x30,0x63,0x00,0xff,0x3c,0x02,0x00,0x40,0x00,0x62,0x18,0x25,0xad,0x23,0x00,0x00,
+0xa4,0xcc,0x00,0x0e,0xa4,0xcc,0x00,0x0c,0xa0,0xc0,0x00,0x10,0x03,0xe0,0x00,0x08,
+0x00,0x00,0x00,0x00,0x30,0x84,0xff,0xff,0x00,0x04,0x10,0xc0,0x00,0x44,0x10,0x21,
+0x27,0x89,0x8f,0xf0,0x00,0x02,0x10,0x80,0x00,0x49,0x10,0x21,0x97,0x83,0x8f,0xe0,
+0x94,0x4a,0x00,0x04,0x3c,0x02,0xb0,0x08,0x00,0x03,0x38,0xc0,0x00,0x0a,0x40,0xc0,
+0x00,0xe3,0x18,0x21,0x01,0x0a,0x28,0x21,0x00,0xe2,0x38,0x21,0x01,0x02,0x40,0x21,
+0x00,0x03,0x18,0x80,0x00,0x05,0x28,0x80,0x3c,0x06,0xb0,0x03,0x3c,0x02,0x80,0x01,
+0x00,0xa9,0x28,0x21,0x00,0x69,0x18,0x21,0x34,0xc6,0x00,0x20,0x34,0x09,0xff,0xff,
+0x24,0x42,0x84,0x34,0xac,0xc2,0x00,0x00,0xa4,0x64,0x00,0x00,0xac,0xe4,0x00,0x00,
+0xa4,0xa9,0x00,0x00,0xad,0x09,0x00,0x00,0xa7,0x8a,0x8f,0xe0,0x03,0xe0,0x00,0x08,
+0x00,0x00,0x00,0x00,0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x01,0x34,0x63,0x00,0x20,
+0x24,0x42,0x84,0xb4,0x3c,0x04,0xb0,0x03,0xac,0x62,0x00,0x00,0x34,0x84,0x01,0x10,
+0x8c,0x82,0x00,0x00,0x97,0x83,0x81,0x60,0x30,0x42,0xff,0xff,0x10,0x62,0x00,0x16,
+0x24,0x0a,0x00,0x01,0xa7,0x82,0x81,0x60,0xaf,0x80,0xb4,0x40,0x00,0x40,0x28,0x21,
+0x24,0x06,0x00,0x01,0x27,0x84,0xb4,0x44,0x25,0x43,0xff,0xff,0x00,0x66,0x10,0x04,
+0x00,0xa2,0x10,0x24,0x14,0x40,0x00,0x07,0x00,0x00,0x00,0x00,0x8c,0x83,0xff,0xfc,
+0x00,0x00,0x00,0x00,0x00,0x66,0x10,0x04,0x00,0xa2,0x10,0x24,0x38,0x42,0x00,0x00,
+0x01,0x42,0x18,0x0a,0x25,0x4a,0x00,0x01,0x2d,0x42,0x00,0x14,0xac,0x83,0x00,0x00,
+0x14,0x40,0xff,0xf1,0x24,0x84,0x00,0x04,0x3c,0x0b,0xb0,0x03,0x00,0x00,0x50,0x21,
+0x3c,0x0c,0x80,0x00,0x27,0x89,0xb4,0x90,0x35,0x6b,0x01,0x20,0x8d,0x68,0x00,0x00,
+0x8d,0x23,0x00,0x04,0x01,0x0c,0x10,0x24,0x00,0x02,0x17,0xc2,0x11,0x03,0x00,0x37,
+0xa1,0x22,0x00,0xdc,0xa1,0x20,0x00,0xd5,0xa1,0x20,0x00,0xd6,0x01,0x20,0x30,0x21,
+0x00,0x00,0x38,0x21,0x00,0x00,0x28,0x21,0x01,0x20,0x20,0x21,0x00,0xa8,0x10,0x06,
+0x30,0x42,0x00,0x01,0x10,0xe0,0x00,0x10,0xa0,0x82,0x00,0x0a,0x90,0x82,0x00,0x07,
+0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x31,0x24,0xa2,0xff,0xff,0xa0,0x82,0x00,0x08,
+0x90,0x82,0x00,0x0a,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x09,0x00,0x00,0x00,0x00,
+0x90,0x83,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x03,0x10,0x40,0x00,0x43,0x10,0x21,
+0x00,0x46,0x10,0x21,0xa0,0x45,0x00,0x09,0x90,0x82,0x00,0x0a,0x00,0x00,0x00,0x00,
+0x10,0x40,0x00,0x07,0x00,0x00,0x00,0x00,0x14,0xe0,0x00,0x04,0x00,0x00,0x00,0x00,
+0xa0,0xc5,0x00,0xd5,0x24,0x07,0x00,0x01,0xa0,0x85,0x00,0x08,0xa0,0xc5,0x00,0xd6,
+0x24,0xa5,0x00,0x01,0x2c,0xa2,0x00,0x1c,0x14,0x40,0xff,0xe0,0x24,0x84,0x00,0x03,
+0x90,0xc4,0x00,0xd5,0x00,0x00,0x28,0x21,0x00,0xa4,0x10,0x2b,0x10,0x40,0x00,0x0b,
+0x00,0x00,0x00,0x00,0x00,0xc0,0x18,0x21,0xa0,0x64,0x00,0x08,0x90,0xc2,0x00,0xd5,
+0x24,0xa5,0x00,0x01,0xa0,0x62,0x00,0x09,0x90,0xc4,0x00,0xd5,0x00,0x00,0x00,0x00,
+0x00,0xa4,0x10,0x2b,0x14,0x40,0xff,0xf8,0x24,0x63,0x00,0x03,0x25,0x4a,0x00,0x01,
+0x2d,0x42,0x00,0x08,0xad,0x28,0x00,0x04,0x25,0x6b,0x00,0x04,0x14,0x40,0xff,0xbf,
+0x25,0x29,0x00,0xec,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x90,0x82,0x00,0x05,
+0x08,0x00,0x21,0x68,0xa0,0x82,0x00,0x08,0x97,0x85,0x8b,0x6a,0x3c,0x03,0xb0,0x03,
+0x3c,0x02,0x80,0x01,0x27,0xbd,0xff,0xe8,0x34,0x63,0x00,0x20,0x24,0x42,0x86,0x68,
+0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x14,0xac,0x62,0x00,0x00,0x30,0x90,0x00,0xff,
+0x00,0x05,0x28,0x42,0x00,0x00,0x48,0x21,0x27,0x8f,0xb4,0x94,0x00,0x00,0x50,0x21,
+0x00,0x00,0x58,0x21,0x27,0x98,0xb5,0x74,0x27,0x99,0xb5,0x70,0x27,0x8e,0xb5,0x6e,
+0x27,0x8c,0xb4,0x98,0x27,0x8d,0xb4,0xf0,0x27,0x88,0xb5,0x68,0x00,0x0a,0x18,0x80,
+0x01,0x6f,0x10,0x21,0xac,0x40,0x00,0x00,0xac,0x45,0x00,0x58,0x00,0x6e,0x20,0x21,
+0x00,0x78,0x10,0x21,0xa1,0x00,0xff,0xfc,0xad,0x00,0x00,0x00,0xa1,0x00,0x00,0x04,
+0xa1,0x00,0x00,0x05,0xad,0x00,0xff,0xf8,0x00,0x79,0x18,0x21,0x24,0x06,0x00,0x01,
+0x24,0xc6,0xff,0xff,0xa0,0x80,0x00,0x00,0xa4,0x60,0x00,0x00,0xac,0x40,0x00,0x00,
+0x24,0x63,0x00,0x02,0x24,0x42,0x00,0x04,0x04,0xc1,0xff,0xf9,0x24,0x84,0x00,0x01,
+0x00,0x0a,0x10,0x80,0x00,0x4d,0x20,0x21,0x00,0x00,0x30,0x21,0x00,0x4c,0x18,0x21,
+0x27,0x87,0x81,0x64,0x8c,0xe2,0x00,0x00,0x24,0xe7,0x00,0x04,0xac,0x82,0x00,0x00,
+0xa0,0x66,0x00,0x00,0xa0,0x66,0x00,0x01,0x24,0xc6,0x00,0x01,0x28,0xc2,0x00,0x1c,
+0xa0,0x60,0x00,0x02,0x24,0x84,0x00,0x04,0x14,0x40,0xff,0xf6,0x24,0x63,0x00,0x03,
+0x25,0x29,0x00,0x01,0x29,0x22,0x00,0x08,0x25,0x4a,0x00,0x3b,0x25,0x08,0x00,0xec,
+0x14,0x40,0xff,0xd6,0x25,0x6b,0x00,0xec,0xa7,0x80,0x81,0x60,0x00,0x00,0x48,0x21,
+0x27,0x83,0xb4,0x40,0xac,0x69,0x00,0x00,0x25,0x29,0x00,0x01,0x29,0x22,0x00,0x0c,
+0x14,0x40,0xff,0xfc,0x24,0x63,0x00,0x04,0x0c,0x00,0x21,0x2d,0x00,0x00,0x00,0x00,
+0x2e,0x04,0x00,0x14,0x27,0x83,0xb4,0x90,0x24,0x09,0x00,0x07,0x10,0x80,0x00,0x0a,
+0x00,0x00,0x00,0x00,0x90,0x62,0x00,0xd5,0x25,0x29,0xff,0xff,0xa0,0x62,0x00,0x00,
+0x05,0x21,0xff,0xfa,0x24,0x63,0x00,0xec,0x8f,0xbf,0x00,0x14,0x8f,0xb0,0x00,0x10,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x18,0x90,0x62,0x00,0xd6,0x08,0x00,0x21,0xeb,
+0x25,0x29,0xff,0xff,0x30,0x84,0x00,0xff,0x00,0x04,0x11,0x00,0x00,0x44,0x10,0x23,
+0x00,0x02,0x10,0x80,0x00,0x44,0x10,0x23,0x00,0x02,0x10,0x80,0x27,0x83,0xb4,0x90,
+0x00,0x43,0x60,0x21,0x3c,0x04,0xb0,0x03,0x3c,0x02,0x80,0x01,0x34,0x84,0x00,0x20,
+0x24,0x42,0x87,0xd4,0x30,0xc6,0x00,0xff,0x93,0xa9,0x00,0x13,0x30,0xa5,0x00,0xff,
+0x30,0xe7,0x00,0xff,0xac,0x82,0x00,0x00,0x10,0xc0,0x00,0xeb,0x25,0x8f,0x00,0xd0,
+0x91,0x82,0x00,0x00,0x00,0x00,0x00,0x00,0x24,0x42,0xff,0xfc,0x2c,0x43,0x00,0x18,
+0x10,0x60,0x00,0xcf,0x3c,0x03,0x80,0x01,0x00,0x02,0x10,0x80,0x24,0x63,0x02,0x5c,
+0x00,0x43,0x10,0x21,0x8c,0x44,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x08,
+0x00,0x00,0x00,0x00,0x2d,0x22,0x00,0x2d,0x10,0x40,0x00,0x14,0x00,0x00,0x00,0x00,
+0x10,0xa0,0x00,0x0f,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x01,0x10,0xa2,0x00,0x09,
+0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x02,0x10,0xa2,0x00,0x06,0x00,0x00,0x00,0x00,
+0x8d,0x82,0x00,0xd0,0x00,0x00,0x00,0x00,0x24,0x42,0xff,0xd0,0x03,0xe0,0x00,0x08,
+0xad,0x82,0x00,0xd0,0x8d,0x82,0x00,0xd0,0x08,0x00,0x22,0x23,0x24,0x42,0xff,0xe0,
+0x8d,0x82,0x00,0xd0,0x08,0x00,0x22,0x23,0x24,0x42,0x00,0x01,0x10,0xa0,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x01,0x10,0xa2,0xff,0xf9,0x00,0x00,0x00,0x00,
+0x24,0x02,0x00,0x02,0x10,0xa2,0x00,0x07,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x03,
+0x14,0xa2,0xff,0xf0,0x00,0x00,0x00,0x00,0x8d,0x82,0x00,0xd0,0x08,0x00,0x22,0x23,
+0x24,0x42,0xff,0xe8,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x8d,0x82,0x00,0xd0,
+0x08,0x00,0x22,0x23,0x24,0x42,0x00,0x02,0x10,0xa0,0xff,0xfc,0x00,0x00,0x00,0x00,
+0x24,0x02,0x00,0x01,0x10,0xa2,0xff,0xe6,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x02,
+0x10,0xa2,0xff,0xf4,0x24,0x02,0x00,0x03,0x14,0xa2,0xff,0xef,0x00,0x00,0x00,0x00,
+0x8d,0x82,0x00,0xd0,0x08,0x00,0x22,0x23,0x24,0x42,0xff,0xf8,0x2d,0x22,0x00,0x19,
+0x14,0x40,0xff,0xde,0x00,0x00,0x00,0x00,0x10,0xa0,0xff,0xec,0x00,0x00,0x00,0x00,
+0x24,0x02,0x00,0x01,0x10,0xa2,0xff,0xd6,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x02,
+0x10,0xa2,0xff,0xe4,0x24,0x02,0x00,0x03,0x10,0xa2,0xff,0xf1,0x00,0x00,0x00,0x00,
+0x8d,0x82,0x00,0xd0,0x08,0x00,0x22,0x23,0x24,0x42,0xff,0xf0,0x2d,0x22,0x00,0x1b,
+0x10,0x40,0xff,0xf1,0x00,0x00,0x00,0x00,0x10,0xa0,0xff,0xdc,0x00,0x00,0x00,0x00,
+0x24,0x02,0x00,0x01,0x10,0xa2,0xff,0xc6,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x02,
+0x14,0xa2,0xff,0xce,0x00,0x00,0x00,0x00,0x8d,0x82,0x00,0xd0,0x08,0x00,0x22,0x23,
+0x24,0x42,0xff,0xf4,0x2d,0x22,0x00,0x1e,0x10,0x40,0xff,0xe3,0x00,0x00,0x00,0x00,
+0x10,0xa0,0xff,0xce,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x01,0x10,0xa2,0xff,0xc9,
+0x24,0x02,0x00,0x02,0x10,0xa2,0xff,0xd6,0x00,0x00,0x00,0x00,0x08,0x00,0x22,0x34,
+0x24,0x02,0x00,0x03,0x2d,0x22,0x00,0x23,0x10,0x40,0xff,0xd7,0x00,0x00,0x00,0x00,
+0x10,0xa0,0xff,0xaf,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x01,0x10,0xa2,0xff,0xbd,
+0x24,0x02,0x00,0x02,0x10,0xa2,0xff,0xda,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x03,
+0x14,0xa2,0xff,0x9f,0x00,0x00,0x00,0x00,0x08,0x00,0x22,0x25,0x00,0x00,0x00,0x00,
+0x2d,0x22,0x00,0x25,0x10,0x40,0xff,0xc8,0x00,0x00,0x00,0x00,0x10,0xa0,0xff,0xa0,
+0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x01,0x10,0xa2,0x00,0x06,0x00,0x00,0x00,0x00,
+0x24,0x02,0x00,0x02,0x10,0xa2,0xff,0x97,0x00,0x00,0x00,0x00,0x08,0x00,0x22,0x80,
+0x24,0x02,0x00,0x03,0x8d,0x82,0x00,0xd0,0x08,0x00,0x22,0x23,0x24,0x42,0xff,0xfc,
+0x2d,0x22,0x00,0x16,0x14,0x40,0x00,0x0e,0x00,0x00,0x00,0x00,0x10,0xa0,0xff,0xa3,
+0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x01,0x10,0xa2,0xff,0x8d,0x00,0x00,0x00,0x00,
+0x24,0x02,0x00,0x02,0x10,0xa2,0xff,0x9b,0x24,0x02,0x00,0x03,0x14,0xa2,0xff,0xa8,
+0x00,0x00,0x00,0x00,0x8d,0x82,0x00,0xd0,0x08,0x00,0x22,0x23,0x24,0x42,0xff,0xfa,
+0x10,0xa0,0xff,0x96,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x01,0x10,0xa2,0xff,0x80,
+0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x02,0x10,0xa2,0xff,0x8e,0x00,0x00,0x00,0x00,
+0x08,0x00,0x22,0x48,0x00,0x00,0x00,0x00,0x2d,0x22,0x00,0x17,0x14,0x40,0xff,0x9e,
+0x00,0x00,0x00,0x00,0x08,0x00,0x22,0x97,0x00,0x00,0x00,0x00,0x2d,0x22,0x00,0x19,
+0x10,0x40,0xff,0xe2,0x00,0x00,0x00,0x00,0x10,0xa0,0xff,0x84,0x00,0x00,0x00,0x00,
+0x24,0x02,0x00,0x01,0x10,0xa2,0xff,0x6e,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x02,
+0x10,0xa2,0xff,0x7c,0x24,0x02,0x00,0x03,0x10,0xa2,0xff,0x89,0x00,0x00,0x00,0x00,
+0x08,0x00,0x22,0x25,0x00,0x00,0x00,0x00,0x08,0x00,0x22,0xb4,0x2d,0x22,0x00,0x1b,
+0x2d,0x22,0x00,0x1e,0x10,0x40,0xff,0xde,0x00,0x00,0x00,0x00,0x10,0xa0,0xff,0x73,
+0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x01,0x10,0xa2,0xff,0x5d,0x00,0x00,0x00,0x00,
+0x24,0x02,0x00,0x02,0x10,0xa2,0xff,0x6b,0x24,0x02,0x00,0x03,0x10,0xa2,0xff,0x88,
+0x00,0x00,0x00,0x00,0x08,0x00,0x22,0x25,0x00,0x00,0x00,0x00,0x2d,0x22,0x00,0x23,
+0x14,0x40,0xff,0xf2,0x00,0x00,0x00,0x00,0x08,0x00,0x22,0x4e,0x00,0x00,0x00,0x00,
+0x08,0x00,0x22,0x4c,0x2d,0x22,0x00,0x25,0x08,0x00,0x22,0x85,0x2d,0x22,0x00,0x27,
+0x10,0xa0,0xff,0x5e,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x01,0x10,0xa2,0xff,0x48,
+0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x02,0x10,0xa2,0xff,0x56,0x24,0x02,0x00,0x03,
+0x14,0xa2,0xff,0x63,0x00,0x00,0x00,0x00,0x08,0x00,0x22,0x91,0x00,0x00,0x00,0x00,
+0x2d,0x22,0x00,0x27,0x14,0x40,0xff,0x8e,0x00,0x00,0x00,0x00,0x08,0x00,0x22,0x3e,
+0x00,0x00,0x00,0x00,0x2d,0x22,0x00,0x29,0x14,0x40,0xff,0x89,0x00,0x00,0x00,0x00,
+0x08,0x00,0x22,0x2b,0x00,0x00,0x00,0x00,0x91,0x86,0x00,0x00,0x91,0x83,0x00,0xd4,
+0x25,0x8d,0x00,0x5c,0x30,0xc4,0x00,0xff,0x00,0x04,0x10,0x40,0x00,0x44,0x10,0x21,
+0x00,0x04,0x50,0x80,0x01,0x82,0x58,0x21,0x01,0x8a,0x40,0x21,0x25,0x78,0x00,0x08,
+0x10,0x60,0x00,0x37,0x25,0x0e,0x00,0x60,0x2c,0xa2,0x00,0x03,0x14,0x40,0x00,0x25,
+0x00,0x00,0x00,0x00,0x91,0x82,0x00,0xdd,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x1e,
+0x00,0x00,0x00,0x00,0x27,0x87,0x81,0x64,0x01,0x47,0x10,0x21,0x8c,0x43,0x00,0x00,
+0x00,0x00,0x00,0x00,0xad,0x03,0x00,0x60,0x91,0x62,0x00,0x08,0x00,0x00,0x00,0x00,
+0x00,0x40,0x30,0x21,0xa1,0x82,0x00,0x00,0x30,0xc2,0x00,0xff,0x00,0x02,0x10,0x80,
+0x00,0x47,0x10,0x21,0x8c,0x43,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x18,0x42,
+0xad,0xa3,0x00,0x00,0x91,0x84,0x00,0x00,0x8d,0xc5,0x00,0x00,0x00,0x04,0x20,0x80,
+0x00,0x87,0x10,0x21,0x8c,0x43,0x00,0x00,0x00,0x05,0x28,0x40,0x00,0x8c,0x20,0x21,
+0x00,0x03,0x18,0x80,0x00,0xa3,0x10,0x2b,0x00,0x62,0x28,0x0a,0xac,0x85,0x00,0x60,
+0x03,0xe0,0x00,0x08,0xa1,0x80,0x00,0xd4,0x27,0x87,0x81,0x64,0x08,0x00,0x23,0x0e,
+0xa1,0x80,0x00,0xdd,0x27,0x82,0x81,0xd4,0x8d,0x83,0x00,0xd8,0x00,0x82,0x10,0x21,
+0x90,0x44,0x00,0x00,0x24,0x63,0x00,0x01,0x00,0x64,0x20,0x2b,0x14,0x80,0xff,0x0d,
+0xad,0x83,0x00,0xd8,0x8d,0x02,0x00,0x60,0xa1,0x80,0x00,0xd4,0x00,0x02,0x1f,0xc2,
+0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x43,0x03,0xe0,0x00,0x08,0xad,0x82,0x00,0x5c,
+0x10,0xe0,0x00,0x1a,0x24,0x83,0xff,0xfc,0x2c,0x62,0x00,0x18,0x10,0x40,0x01,0x18,
+0x00,0x03,0x10,0x80,0x3c,0x03,0x80,0x01,0x24,0x63,0x02,0xbc,0x00,0x43,0x10,0x21,
+0x8c,0x44,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x08,0x00,0x00,0x00,0x00,
+0x2d,0x22,0x00,0x2d,0x10,0x40,0x00,0x5f,0x00,0x00,0x00,0x00,0x10,0xa0,0x00,0x5a,
+0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x01,0x10,0xa2,0x00,0x54,0x00,0x00,0x00,0x00,
+0x24,0x02,0x00,0x02,0x10,0xa2,0x00,0x51,0x00,0x00,0x00,0x00,0x8d,0x82,0x00,0xd0,
+0x00,0x00,0x00,0x00,0x24,0x42,0xff,0xd0,0xad,0x82,0x00,0xd0,0x8d,0xe3,0x00,0x00,
+0x8d,0xa2,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x43,0x10,0x21,0xad,0xa2,0x00,0x00,
+0xad,0xe0,0x00,0x00,0x8d,0xa3,0x00,0x00,0x8d,0xc4,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x83,0x10,0x2a,0x10,0x40,0x00,0x22,0x00,0x00,0x00,0x00,0x93,0x05,0x00,0x01,
+0x91,0x82,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x45,0x00,0x05,0x24,0x02,0x00,0x01,
+0xa1,0x85,0x00,0x00,0xa1,0x82,0x00,0xd4,0x03,0xe0,0x00,0x08,0xad,0x80,0x00,0xd8,
+0x91,0x82,0x00,0xdd,0x24,0x03,0x00,0x01,0x10,0x43,0x00,0x05,0x00,0x00,0x00,0x00,
+0xa1,0x83,0x00,0xd4,0xad,0x80,0x00,0xd8,0x03,0xe0,0x00,0x08,0xa1,0x83,0x00,0xdd,
+0x00,0x04,0x17,0xc2,0x00,0x82,0x10,0x21,0x00,0x02,0x10,0x43,0xad,0xa2,0x00,0x00,
+0x91,0x83,0x00,0x00,0x27,0x82,0x81,0x64,0x8d,0xc5,0x00,0x00,0x00,0x03,0x18,0x80,
+0x00,0x62,0x18,0x21,0x8c,0x64,0x00,0x00,0x00,0x05,0x28,0x40,0x00,0x04,0x18,0x80,
+0x00,0xa3,0x10,0x2b,0x00,0x62,0x28,0x0a,0x08,0x00,0x23,0x20,0xad,0xc5,0x00,0x00,
+0x97,0x82,0x8b,0x6c,0x00,0x00,0x00,0x00,0x00,0x62,0x10,0x2a,0x10,0x40,0xfe,0xb9,
+0x00,0x00,0x00,0x00,0x91,0x82,0x00,0xdd,0x00,0x00,0x00,0x00,0x14,0x40,0x00,0x15,
+0x00,0x00,0x00,0x00,0x91,0x83,0x00,0x00,0x27,0x82,0x81,0x64,0x00,0x03,0x18,0x80,
+0x00,0x62,0x10,0x21,0x8c,0x44,0x00,0x00,0x00,0x6c,0x18,0x21,0xac,0x64,0x00,0x60,
+0x93,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x10,0x80,0x01,0x82,0x10,0x21,
+0x24,0x4e,0x00,0x60,0xa1,0x85,0x00,0x00,0x8d,0xc2,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x02,0x1f,0xc2,0x00,0x43,0x10,0x21,0x00,0x02,0x10,0x43,0x03,0xe0,0x00,0x08,
+0xad,0xa2,0x00,0x00,0x08,0x00,0x23,0x92,0xa1,0x80,0x00,0xdd,0x8d,0x82,0x00,0xd0,
+0x08,0x00,0x23,0x4e,0x24,0x42,0xff,0xe0,0x8d,0x82,0x00,0xd0,0x08,0x00,0x23,0x4e,
+0x24,0x42,0x00,0x01,0x10,0xa0,0x00,0x0d,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x01,
+0x10,0xa2,0xff,0xf9,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x02,0x10,0xa2,0xff,0xa7,
+0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x03,0x14,0xa2,0xff,0xf0,0x00,0x00,0x00,0x00,
+0x8d,0x82,0x00,0xd0,0x08,0x00,0x23,0x4e,0x24,0x42,0xff,0xe8,0x8d,0x82,0x00,0xd0,
+0x08,0x00,0x23,0x4e,0x24,0x42,0x00,0x02,0x10,0xa0,0xff,0xfc,0x00,0x00,0x00,0x00,
+0x24,0x02,0x00,0x01,0x10,0xa2,0xff,0xe8,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x02,
+0x10,0xa2,0xff,0x96,0x24,0x02,0x00,0x03,0x14,0xa2,0xff,0xf1,0x00,0x00,0x00,0x00,
+0x8d,0x82,0x00,0xd0,0x08,0x00,0x23,0x4e,0x24,0x42,0xff,0xf8,0x2d,0x22,0x00,0x19,
+0x14,0x40,0xff,0xe0,0x00,0x00,0x00,0x00,0x10,0xa0,0xff,0xec,0x00,0x00,0x00,0x00,
+0x24,0x02,0x00,0x01,0x10,0xa2,0xff,0xd8,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x02,
+0x10,0xa2,0xff,0x86,0x24,0x02,0x00,0x03,0x10,0xa2,0xff,0xf1,0x00,0x00,0x00,0x00,
+0x8d,0x82,0x00,0xd0,0x08,0x00,0x23,0x4e,0x24,0x42,0xff,0xf0,0x2d,0x22,0x00,0x1b,
+0x10,0x40,0xff,0xf1,0x00,0x00,0x00,0x00,0x10,0xa0,0xff,0xdc,0x00,0x00,0x00,0x00,
+0x24,0x02,0x00,0x01,0x10,0xa2,0xff,0xc8,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x02,
+0x14,0xa2,0xff,0xd0,0x00,0x00,0x00,0x00,0x8d,0x82,0x00,0xd0,0x08,0x00,0x23,0x4e,
+0x24,0x42,0xff,0xf4,0x2d,0x22,0x00,0x1e,0x10,0x40,0xff,0xe3,0x00,0x00,0x00,0x00,
+0x10,0xa0,0xff,0xce,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x01,0x10,0xa2,0xff,0x6b,
+0x24,0x02,0x00,0x02,0x10,0xa2,0xff,0xd6,0x00,0x00,0x00,0x00,0x08,0x00,0x23,0xaa,
+0x24,0x02,0x00,0x03,0x2d,0x22,0x00,0x23,0x10,0x40,0xff,0xd7,0x00,0x00,0x00,0x00,
+0x10,0xa0,0xff,0xb1,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x01,0x10,0xa2,0xff,0x5f,
+0x24,0x02,0x00,0x02,0x10,0xa2,0xff,0xda,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x03,
+0x14,0xa2,0xff,0x56,0x00,0x00,0x00,0x00,0x08,0x00,0x23,0x9b,0x00,0x00,0x00,0x00,
+0x2d,0x22,0x00,0x25,0x10,0x40,0xff,0xc8,0x00,0x00,0x00,0x00,0x10,0xa0,0xff,0xa2,
+0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x01,0x10,0xa2,0x00,0x06,0x00,0x00,0x00,0x00,
+0x24,0x02,0x00,0x02,0x10,0xa2,0xff,0x99,0x00,0x00,0x00,0x00,0x08,0x00,0x23,0xf4,
+0x24,0x02,0x00,0x03,0x8d,0x82,0x00,0xd0,0x08,0x00,0x23,0x4e,0x24,0x42,0xff,0xfc,
+0x2d,0x22,0x00,0x16,0x14,0x40,0x00,0x0e,0x00,0x00,0x00,0x00,0x10,0xa0,0xff,0xa3,
+0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x01,0x10,0xa2,0xff,0x8f,0x00,0x00,0x00,0x00,
+0x24,0x02,0x00,0x02,0x10,0xa2,0xff,0x3d,0x24,0x02,0x00,0x03,0x14,0xa2,0xff,0xa8,
+0x00,0x00,0x00,0x00,0x8d,0x82,0x00,0xd0,0x08,0x00,0x23,0x4e,0x24,0x42,0xff,0xfa,
+0x10,0xa0,0xff,0x96,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x01,0x10,0xa2,0xff,0x82,
+0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x02,0x10,0xa2,0xff,0x30,0x00,0x00,0x00,0x00,
+0x08,0x00,0x23,0xbc,0x00,0x00,0x00,0x00,0x2d,0x22,0x00,0x17,0x14,0x40,0xff,0x9e,
+0x00,0x00,0x00,0x00,0x08,0x00,0x24,0x0b,0x00,0x00,0x00,0x00,0x2d,0x22,0x00,0x19,
+0x10,0x40,0xff,0xe2,0x00,0x00,0x00,0x00,0x10,0xa0,0xff,0x84,0x00,0x00,0x00,0x00,
+0x24,0x02,0x00,0x01,0x10,0xa2,0xff,0x70,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x02,
+0x10,0xa2,0xff,0x1e,0x24,0x02,0x00,0x03,0x10,0xa2,0xff,0x89,0x00,0x00,0x00,0x00,
+0x08,0x00,0x23,0x9b,0x00,0x00,0x00,0x00,0x08,0x00,0x24,0x28,0x2d,0x22,0x00,0x1b,
+0x2d,0x22,0x00,0x1e,0x10,0x40,0xff,0xde,0x00,0x00,0x00,0x00,0x10,0xa0,0xff,0x73,
+0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x01,0x10,0xa2,0xff,0x5f,0x00,0x00,0x00,0x00,
+0x24,0x02,0x00,0x02,0x10,0xa2,0xff,0x0d,0x24,0x02,0x00,0x03,0x10,0xa2,0xff,0x88,
+0x00,0x00,0x00,0x00,0x08,0x00,0x23,0x9b,0x00,0x00,0x00,0x00,0x2d,0x22,0x00,0x23,
+0x14,0x40,0xff,0xf2,0x00,0x00,0x00,0x00,0x08,0x00,0x23,0xc2,0x00,0x00,0x00,0x00,
+0x08,0x00,0x23,0xc0,0x2d,0x22,0x00,0x25,0x08,0x00,0x23,0xf9,0x2d,0x22,0x00,0x27,
+0x10,0xa0,0xff,0x5e,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x01,0x10,0xa2,0xff,0x4a,
+0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x02,0x10,0xa2,0xfe,0xf8,0x24,0x02,0x00,0x03,
+0x14,0xa2,0xff,0x63,0x00,0x00,0x00,0x00,0x08,0x00,0x24,0x05,0x00,0x00,0x00,0x00,
+0x2d,0x22,0x00,0x27,0x14,0x40,0xff,0x8e,0x00,0x00,0x00,0x00,0x08,0x00,0x23,0xb2,
+0x00,0x00,0x00,0x00,0x2d,0x22,0x00,0x29,0x14,0x40,0xff,0x89,0x00,0x00,0x00,0x00,
+0x08,0x00,0x23,0xa1,0x00,0x00,0x00,0x00,0x27,0xbd,0xff,0xe8,0x3c,0x02,0xb0,0x03,
+0xaf,0xbf,0x00,0x14,0xaf,0xb0,0x00,0x10,0x34,0x42,0x01,0x18,0x3c,0x03,0xb0,0x03,
+0x8c,0x50,0x00,0x00,0x34,0x63,0x01,0x2c,0x90,0x62,0x00,0x00,0x32,0x05,0x00,0x01,
+0xa3,0x82,0x80,0x10,0x14,0xa0,0x00,0x14,0x30,0x44,0x00,0xff,0x32,0x02,0x01,0x00,
+0x14,0x40,0x00,0x09,0x00,0x00,0x00,0x00,0x32,0x02,0x08,0x00,0x10,0x40,0x00,0x02,
+0x24,0x02,0x00,0x01,0xa3,0x82,0xbc,0x08,0x8f,0xbf,0x00,0x14,0x8f,0xb0,0x00,0x10,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x18,0x0c,0x00,0x05,0x39,0x00,0x00,0x00,0x00,
+0x26,0x02,0xff,0x00,0xa3,0x80,0xbc,0x08,0x3c,0x01,0xb0,0x03,0xac,0x22,0x01,0x18,
+0x08,0x00,0x24,0x77,0x32,0x02,0x08,0x00,0x0c,0x00,0x21,0x9a,0x00,0x00,0x00,0x00,
+0x26,0x02,0xff,0xff,0x3c,0x01,0xb0,0x03,0xac,0x22,0x01,0x18,0x08,0x00,0x24,0x74,
+0x32,0x02,0x01,0x00,0x27,0xbd,0xff,0xe0,0x3c,0x02,0xb0,0x03,0x34,0x42,0x00,0xd0,
+0xaf,0xbf,0x00,0x18,0x8c,0x43,0x00,0x00,0x3c,0x02,0x00,0x40,0x24,0x07,0x0f,0xff,
+0x00,0x03,0x33,0x02,0x00,0x03,0x2d,0x02,0x00,0x03,0x43,0x02,0x30,0x69,0x0f,0xff,
+0x00,0x62,0x18,0x24,0x30,0xa5,0x00,0x03,0x30,0xc6,0x00,0xff,0x10,0x60,0x00,0x08,
+0x31,0x08,0x00,0xff,0x01,0x00,0x30,0x21,0x0c,0x00,0x25,0x38,0xaf,0xa9,0x00,0x10,
+0x8f,0xbf,0x00,0x18,0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x20,
+0x0c,0x00,0x25,0x8a,0x00,0x00,0x00,0x00,0x3c,0x03,0xb0,0x03,0x34,0x63,0x00,0xd4,
+0x08,0x00,0x24,0xa0,0xac,0x62,0x00,0x00,0x27,0xbd,0xff,0xc0,0xaf,0xb6,0x00,0x30,
+0xaf,0xb3,0x00,0x24,0xaf,0xb1,0x00,0x1c,0xaf,0xb0,0x00,0x18,0xaf,0xbf,0x00,0x3c,
+0xaf,0xbe,0x00,0x38,0xaf,0xb7,0x00,0x34,0xaf,0xb5,0x00,0x2c,0xaf,0xb4,0x00,0x28,
+0xaf,0xb2,0x00,0x20,0x0c,0x00,0x17,0xc8,0x00,0x80,0x80,0x21,0x00,0x00,0xb0,0x21,
+0x00,0x00,0x88,0x21,0x10,0x40,0x00,0x12,0x00,0x00,0x98,0x21,0x3c,0x02,0xb0,0x03,
+0x3c,0x03,0xb0,0x03,0x3c,0x04,0xb0,0x03,0x24,0x05,0x00,0x01,0x34,0x42,0x00,0xbc,
+0x34,0x63,0x00,0xbb,0x34,0x84,0x00,0xba,0xa4,0x40,0x00,0x00,0xa0,0x65,0x00,0x00,
+0xa0,0x85,0x00,0x00,0x7b,0xbe,0x01,0xfc,0x7b,0xb6,0x01,0xbc,0x7b,0xb4,0x01,0x7c,
+0x7b,0xb2,0x01,0x3c,0x7b,0xb0,0x00,0xfc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x40,
+0x3c,0x02,0xb0,0x03,0x34,0x42,0x01,0x47,0x90,0x44,0x00,0x00,0x00,0x10,0x1a,0x02,
+0x3c,0x15,0xfd,0xff,0x30,0x84,0x00,0xff,0xa0,0x50,0x00,0x00,0x30,0x74,0x00,0x0f,
+0xaf,0xa4,0x00,0x10,0x00,0x00,0x90,0x21,0x3c,0x17,0x02,0x00,0x36,0xb5,0xff,0xff,
+0x3c,0x1e,0xb0,0x03,0x0c,0x00,0x06,0xce,0x24,0x04,0x04,0x00,0x00,0x57,0x10,0x25,
+0x00,0x40,0x28,0x21,0x0c,0x00,0x06,0xc1,0x24,0x04,0x04,0x00,0x00,0x00,0x80,0x21,
+0x0c,0x00,0x26,0x52,0x00,0x00,0x00,0x00,0x26,0x03,0x00,0x01,0x30,0x70,0x00,0xff,
+0x10,0x40,0x00,0x47,0x2e,0x03,0x00,0x02,0x14,0x60,0xff,0xf9,0x00,0x00,0x00,0x00,
+0x0c,0x00,0x06,0xce,0x24,0x04,0x04,0x00,0x00,0x55,0x10,0x24,0x00,0x40,0x28,0x21,
+0x0c,0x00,0x06,0xc1,0x24,0x04,0x04,0x00,0x24,0x02,0x00,0x01,0x12,0x82,0x00,0x38,
+0x00,0x00,0x00,0x00,0x12,0x80,0x00,0x36,0x00,0x00,0x00,0x00,0x32,0x22,0x00,0x60,
+0x32,0x23,0x0c,0x00,0x00,0x03,0x1a,0x02,0x3c,0x05,0x00,0x60,0x00,0x02,0x11,0x42,
+0x02,0x25,0x20,0x24,0x00,0x43,0x10,0x25,0x3c,0x03,0x04,0x00,0x02,0x23,0x28,0x24,
+0x00,0x04,0x24,0x42,0x00,0x44,0x10,0x25,0x00,0x05,0x2d,0x02,0x00,0x45,0x88,0x25,
+0x12,0x20,0x00,0x05,0x26,0x42,0x00,0x01,0x26,0xc2,0x00,0x01,0x30,0x56,0x00,0xff,
+0x02,0x71,0x98,0x21,0x26,0x42,0x00,0x01,0x02,0x5e,0x20,0x21,0x30,0x52,0x00,0xff,
+0x2e,0x43,0x00,0x05,0xa0,0x91,0x00,0xd8,0x14,0x60,0xff,0xce,0x3c,0x02,0xb0,0x03,
+0x8f,0xa5,0x00,0x10,0x34,0x42,0x01,0x47,0xa0,0x45,0x00,0x00,0x12,0x60,0x00,0x0e,
+0x3c,0x02,0xb0,0x03,0x12,0xc0,0x00,0x0d,0x34,0x42,0x00,0xbc,0x00,0x13,0x10,0x40,
+0x00,0x53,0x10,0x21,0x00,0x02,0x10,0xc0,0x00,0x53,0x10,0x21,0x00,0x02,0x98,0x80,
+0x02,0x76,0x00,0x1b,0x16,0xc0,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x07,0x00,0x0d,
+0x00,0x00,0x98,0x12,0x3c,0x02,0xb0,0x03,0x34,0x42,0x00,0xbc,0x3c,0x03,0xb0,0x03,
+0x3c,0x04,0xb0,0x03,0xa4,0x53,0x00,0x00,0x34,0x63,0x00,0xbb,0x34,0x84,0x00,0xba,
+0x24,0x02,0x00,0x01,0xa0,0x60,0x00,0x00,0x08,0x00,0x24,0xc5,0xa0,0x82,0x00,0x00,
+0x0c,0x00,0x06,0xce,0x24,0x04,0x04,0xfc,0x08,0x00,0x24,0xf3,0x00,0x40,0x88,0x21,
+0x3c,0x03,0xb0,0x03,0x34,0x63,0x00,0xbc,0x3c,0x04,0xb0,0x03,0x3c,0x05,0xb0,0x03,
+0xa4,0x60,0x00,0x00,0x34,0x84,0x00,0xbb,0x34,0xa5,0x00,0xba,0x24,0x02,0x00,0x02,
+0x24,0x03,0x00,0x01,0xa0,0x82,0x00,0x00,0x08,0x00,0x24,0xc5,0xa0,0xa3,0x00,0x00,
+0x27,0xbd,0xff,0xd8,0xaf,0xb0,0x00,0x10,0x30,0xd0,0x00,0xff,0x2e,0x02,0x00,0x2e,
+0xaf,0xb2,0x00,0x18,0xaf,0xb1,0x00,0x14,0xaf,0xbf,0x00,0x20,0xaf,0xb3,0x00,0x1c,
+0x30,0xb1,0x00,0xff,0x14,0x40,0x00,0x06,0x00,0x80,0x90,0x21,0x8f,0xbf,0x00,0x20,
+0x7b,0xb2,0x00,0xfc,0x7b,0xb0,0x00,0xbc,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x28,
+0x2e,0x13,0x00,0x10,0x24,0x05,0x00,0x14,0x0c,0x00,0x13,0xa0,0x24,0x06,0x01,0x07,
+0x12,0x60,0x00,0x38,0x02,0x00,0x30,0x21,0x8f,0xa2,0x00,0x38,0x30,0xc3,0x00,0x3f,
+0x3c,0x04,0xb0,0x09,0x00,0x02,0x14,0x00,0x00,0x43,0x30,0x25,0x34,0x84,0x01,0x60,
+0x90,0x82,0x00,0x00,0x00,0x00,0x00,0x00,0x14,0x40,0xff,0xfd,0x24,0x02,0x00,0x01,
+0x12,0x22,0x00,0x2a,0x2a,0x22,0x00,0x02,0x14,0x40,0x00,0x24,0x24,0x02,0x00,0x02,
+0x12,0x22,0x00,0x20,0x24,0x02,0x00,0x03,0x12,0x22,0x00,0x19,0x00,0x00,0x00,0x00,
+0x16,0x60,0xff,0xe2,0x24,0x02,0x00,0x01,0x12,0x22,0x00,0x13,0x2a,0x22,0x00,0x02,
+0x14,0x40,0x00,0x0d,0x24,0x02,0x00,0x02,0x12,0x22,0x00,0x09,0x24,0x02,0x00,0x03,
+0x16,0x22,0xff,0xda,0x00,0x00,0x00,0x00,0x24,0x04,0x08,0x4c,0x24,0x05,0xff,0xff,
+0x0c,0x00,0x13,0x5b,0x3c,0x06,0x0c,0xb8,0x08,0x00,0x25,0x43,0x00,0x00,0x00,0x00,
+0x08,0x00,0x25,0x6b,0x24,0x04,0x08,0x48,0x16,0x20,0xff,0xd0,0x00,0x00,0x00,0x00,
+0x08,0x00,0x25,0x6b,0x24,0x04,0x08,0x40,0x08,0x00,0x25,0x6b,0x24,0x04,0x08,0x44,
+0x24,0x04,0x08,0x4c,0x0c,0x00,0x13,0x5b,0x24,0x05,0xff,0xff,0x08,0x00,0x25,0x60,
+0x00,0x00,0x00,0x00,0x08,0x00,0x25,0x79,0x24,0x04,0x08,0x48,0x16,0x20,0xff,0xe0,
+0x00,0x00,0x00,0x00,0x08,0x00,0x25,0x79,0x24,0x04,0x08,0x40,0x08,0x00,0x25,0x79,
+0x24,0x04,0x08,0x44,0x02,0x40,0x20,0x21,0x0c,0x00,0x25,0xca,0x02,0x20,0x28,0x21,
+0x08,0x00,0x25,0x4e,0x00,0x40,0x30,0x21,0x27,0xbd,0xff,0xd8,0x2c,0xc2,0x00,0x2e,
+0xaf,0xb2,0x00,0x18,0xaf,0xb1,0x00,0x14,0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x20,
+0xaf,0xb3,0x00,0x1c,0x00,0xc0,0x80,0x21,0x30,0xb1,0x00,0xff,0x00,0x80,0x90,0x21,
+0x14,0x40,0x00,0x07,0x00,0x00,0x18,0x21,0x8f,0xbf,0x00,0x20,0x7b,0xb2,0x00,0xfc,
+0x7b,0xb0,0x00,0xbc,0x00,0x60,0x10,0x21,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x28,
+0x2e,0x13,0x00,0x10,0x24,0x05,0x00,0x14,0x0c,0x00,0x13,0xa0,0x24,0x06,0x01,0x07,
+0x12,0x60,0x00,0x24,0x02,0x00,0x30,0x21,0x3c,0x03,0xb0,0x09,0x34,0x63,0x01,0x60,
+0x90,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x14,0x40,0xff,0xfd,0x30,0xc5,0x00,0x3f,
+0x0c,0x00,0x26,0x07,0x02,0x20,0x20,0x21,0x16,0x60,0x00,0x0a,0x00,0x40,0x80,0x21,
+0x24,0x02,0x00,0x01,0x12,0x22,0x00,0x15,0x2a,0x22,0x00,0x02,0x14,0x40,0x00,0x0f,
+0x24,0x02,0x00,0x02,0x12,0x22,0x00,0x0b,0x24,0x02,0x00,0x03,0x12,0x22,0x00,0x03,
+0x00,0x00,0x00,0x00,0x08,0x00,0x25,0x96,0x02,0x00,0x18,0x21,0x24,0x04,0x08,0x4c,
+0x24,0x05,0xff,0xff,0x0c,0x00,0x13,0x5b,0x3c,0x06,0x0c,0xb8,0x08,0x00,0x25,0x96,
+0x02,0x00,0x18,0x21,0x08,0x00,0x25,0xb8,0x24,0x04,0x08,0x48,0x16,0x20,0xff,0xf5,
+0x00,0x00,0x00,0x00,0x08,0x00,0x25,0xb8,0x24,0x04,0x08,0x40,0x08,0x00,0x25,0xb8,
+0x24,0x04,0x08,0x44,0x02,0x40,0x20,0x21,0x0c,0x00,0x25,0xca,0x02,0x20,0x28,0x21,
+0x08,0x00,0x25,0xa2,0x00,0x40,0x30,0x21,0x27,0xbd,0xff,0xe8,0x2c,0xc2,0x00,0x1f,
+0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x14,0x00,0xc0,0x80,0x21,0x14,0x40,0x00,0x1d,
+0x30,0xa5,0x00,0xff,0x24,0x02,0x00,0x01,0x10,0xa2,0x00,0x18,0x28,0xa2,0x00,0x02,
+0x14,0x40,0x00,0x12,0x24,0x02,0x00,0x02,0x10,0xa2,0x00,0x0e,0x24,0x02,0x00,0x03,
+0x10,0xa2,0x00,0x07,0x24,0x04,0x08,0x4c,0x26,0x10,0xff,0xe2,0x02,0x00,0x10,0x21,
+0x8f,0xbf,0x00,0x14,0x8f,0xb0,0x00,0x10,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x18,
+0x24,0x05,0xff,0xff,0x0c,0x00,0x13,0x5b,0x3c,0x06,0x0d,0xf8,0x08,0x00,0x25,0xdb,
+0x26,0x10,0xff,0xe2,0x08,0x00,0x25,0xe0,0x24,0x04,0x08,0x48,0x14,0xa0,0xff,0xf2,
+0x24,0x04,0x08,0x40,0x08,0x00,0x25,0xe1,0x24,0x05,0xff,0xff,0x08,0x00,0x25,0xe0,
+0x24,0x04,0x08,0x44,0x2c,0xc2,0x00,0x10,0x14,0x40,0xff,0xec,0x24,0x02,0x00,0x01,
+0x10,0xa2,0x00,0x14,0x28,0xa2,0x00,0x02,0x14,0x40,0x00,0x0e,0x24,0x02,0x00,0x02,
+0x10,0xa2,0x00,0x0a,0x24,0x02,0x00,0x03,0x10,0xa2,0x00,0x03,0x24,0x04,0x08,0x4c,
+0x08,0x00,0x25,0xdb,0x26,0x10,0xff,0xf1,0x24,0x05,0xff,0xff,0x0c,0x00,0x13,0x5b,
+0x3c,0x06,0x0d,0xb8,0x08,0x00,0x25,0xdb,0x26,0x10,0xff,0xf1,0x08,0x00,0x25,0xfa,
+0x24,0x04,0x08,0x48,0x14,0xa0,0xff,0xf6,0x24,0x04,0x08,0x40,0x08,0x00,0x25,0xfb,
+0x24,0x05,0xff,0xff,0x08,0x00,0x25,0xfa,0x24,0x04,0x08,0x44,0x27,0xbd,0xff,0xe8,
+0x30,0x84,0x00,0xff,0x24,0x02,0x00,0x01,0x10,0x82,0x00,0x39,0xaf,0xbf,0x00,0x10,
+0x28,0x82,0x00,0x02,0x14,0x40,0x00,0x27,0x00,0x00,0x00,0x00,0x24,0x02,0x00,0x02,
+0x10,0x82,0x00,0x17,0x00,0xa0,0x30,0x21,0x24,0x02,0x00,0x03,0x10,0x82,0x00,0x05,
+0x24,0x04,0x08,0x3c,0x8f,0xbf,0x00,0x10,0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x18,0x0c,0x00,0x13,0x5b,0x3c,0x05,0x3f,0x00,0x24,0x04,0x08,0x3c,
+0x3c,0x05,0x80,0x00,0x0c,0x00,0x13,0x5b,0x00,0x00,0x30,0x21,0x24,0x04,0x08,0x3c,
+0x3c,0x05,0x80,0x00,0x0c,0x00,0x13,0x5b,0x24,0x06,0x00,0x01,0x24,0x04,0x08,0xac,
+0x0c,0x00,0x13,0x3d,0x24,0x05,0x0f,0xff,0x08,0x00,0x26,0x15,0x00,0x00,0x00,0x00,
+0x24,0x04,0x08,0x34,0x0c,0x00,0x13,0x5b,0x3c,0x05,0x3f,0x00,0x24,0x04,0x08,0x34,
+0x3c,0x05,0x80,0x00,0x0c,0x00,0x13,0x5b,0x00,0x00,0x30,0x21,0x24,0x04,0x08,0x34,
+0x3c,0x05,0x80,0x00,0x0c,0x00,0x13,0x5b,0x24,0x06,0x00,0x01,0x08,0x00,0x26,0x24,
+0x24,0x04,0x08,0xa8,0x14,0x80,0xff,0xdf,0x00,0xa0,0x30,0x21,0x24,0x04,0x08,0x24,
+0x0c,0x00,0x13,0x5b,0x3c,0x05,0x3f,0x00,0x24,0x04,0x08,0x24,0x3c,0x05,0x80,0x00,
+0x0c,0x00,0x13,0x5b,0x00,0x00,0x30,0x21,0x24,0x04,0x08,0x24,0x3c,0x05,0x80,0x00,
+0x0c,0x00,0x13,0x5b,0x24,0x06,0x00,0x01,0x08,0x00,0x26,0x24,0x24,0x04,0x08,0xa0,
+0x00,0xa0,0x30,0x21,0x24,0x04,0x08,0x2c,0x0c,0x00,0x13,0x5b,0x3c,0x05,0x3f,0x00,
+0x24,0x04,0x08,0x2c,0x3c,0x05,0x80,0x00,0x0c,0x00,0x13,0x5b,0x00,0x00,0x30,0x21,
+0x24,0x04,0x08,0x2c,0x3c,0x05,0x80,0x00,0x0c,0x00,0x13,0x5b,0x24,0x06,0x00,0x01,
+0x08,0x00,0x26,0x24,0x24,0x04,0x08,0xa4,0x3c,0x05,0x00,0x14,0x3c,0x02,0xb0,0x05,
+0x34,0x42,0x04,0x20,0x3c,0x06,0xc0,0x00,0x3c,0x03,0xb0,0x05,0x3c,0x04,0xb0,0x05,
+0x34,0xa5,0x17,0x09,0xac,0x45,0x00,0x00,0x34,0xc6,0x05,0x07,0x34,0x63,0x04,0x24,
+0x34,0x84,0x02,0x28,0x3c,0x07,0xb0,0x05,0x24,0x02,0x00,0x20,0xac,0x66,0x00,0x00,
+0x34,0xe7,0x04,0x50,0xa0,0x82,0x00,0x00,0x90,0xe2,0x00,0x00,0x00,0x00,0x00,0x00,
+0x30,0x42,0x00,0x03,0x10,0x40,0xff,0xfc,0x24,0x02,0x00,0x01,0x03,0xe0,0x00,0x08,
+0x00,0x00,0x00,0x00,0x93,0x85,0x81,0xf1,0x24,0x02,0x00,0x01,0x14,0xa2,0x00,0x51,
+0x00,0x80,0x40,0x21,0x8c,0x89,0x00,0x04,0x3c,0x03,0xb0,0x01,0x01,0x23,0x30,0x21,
+0x8c,0xc2,0x00,0x04,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x08,0x10,0x45,0x00,0x59,
+0x00,0x00,0x00,0x00,0x94,0xc2,0x00,0x38,0x24,0x03,0x00,0xb4,0x30,0x44,0x00,0xff,
+0x10,0x83,0x00,0x61,0x24,0x02,0x00,0xc4,0x10,0x82,0x00,0x54,0x24,0x02,0x00,0x94,
+0x10,0x82,0x00,0x45,0x00,0x00,0x00,0x00,0x94,0xc2,0x00,0x38,0x00,0x00,0x00,0x00,
+0x30,0x47,0xff,0xff,0x30,0xe3,0x40,0xff,0x24,0x02,0x40,0x88,0x14,0x62,0x00,0x39,
+0x30,0xe3,0x03,0x00,0x24,0x02,0x03,0x00,0x10,0x62,0x00,0x38,0x00,0x00,0x00,0x00,
+0x94,0xc2,0x00,0x56,0x00,0x00,0x00,0x00,0x30,0x47,0xff,0xff,0x30,0xe2,0x00,0x80,
+0x14,0x40,0x00,0x30,0x3c,0x02,0xb0,0x01,0x01,0x22,0x30,0x21,0x94,0xc3,0x00,0x60,
+0x24,0x02,0x00,0x08,0x14,0x43,0x00,0x3b,0x00,0x00,0x00,0x00,0x90,0xc2,0x00,0x62,
+0x24,0x03,0x00,0x04,0x00,0x02,0x39,0x02,0x10,0xe3,0x00,0x15,0x24,0x02,0x00,0x06,
+0x14,0xe2,0x00,0x34,0x00,0x00,0x00,0x00,0x8d,0x05,0x01,0xac,0x94,0xc4,0x00,0x66,
+0x27,0x82,0x89,0x58,0x00,0x05,0x28,0x80,0x30,0x87,0xff,0xff,0x00,0xa2,0x28,0x21,
+0x00,0x07,0x1a,0x00,0x8c,0xa4,0x00,0x00,0x00,0x07,0x12,0x02,0x00,0x43,0x10,0x25,
+0x24,0x42,0x00,0x5e,0x24,0x03,0xc0,0x00,0x30,0x47,0xff,0xff,0x00,0x83,0x20,0x24,
+0x00,0x87,0x20,0x25,0xac,0xa4,0x00,0x00,0x08,0x00,0x26,0xcd,0xad,0x07,0x00,0x10,
+0x8d,0x05,0x01,0xac,0x94,0xc4,0x00,0x64,0x27,0x82,0x89,0x58,0x00,0x05,0x28,0x80,
+0x30,0x87,0xff,0xff,0x00,0xa2,0x28,0x21,0x00,0x07,0x1a,0x00,0x8c,0xa4,0x00,0x00,
+0x00,0x07,0x12,0x02,0x00,0x43,0x10,0x25,0x24,0x42,0x00,0x36,0x3c,0x03,0xff,0xff,
+0x30,0x47,0xff,0xff,0x00,0x83,0x20,0x24,0x00,0x87,0x20,0x25,0xac,0xa4,0x00,0x00,
+0xad,0x07,0x00,0x10,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x94,0xc2,0x00,0x50,
+0x08,0x00,0x26,0x8b,0x30,0x47,0xff,0xff,0x8d,0x04,0x01,0xac,0x27,0x83,0x89,0x58,
+0x00,0x04,0x20,0x80,0x00,0x83,0x20,0x21,0x8c,0x82,0x00,0x00,0x3c,0x03,0xff,0xff,
+0x00,0x43,0x10,0x24,0x34,0x42,0x00,0x2e,0xac,0x82,0x00,0x00,0x24,0x03,0x00,0x2e,
+0xad,0x03,0x00,0x10,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x8d,0x04,0x01,0xac,
+0x27,0x83,0x89,0x58,0x00,0x04,0x20,0x80,0x00,0x83,0x20,0x21,0x8c,0x82,0x00,0x00,
+0x3c,0x03,0xff,0xff,0x00,0x43,0x10,0x24,0x34,0x42,0x00,0x0e,0x24,0x03,0x00,0x0e,
+0x08,0x00,0x26,0xcc,0xac,0x82,0x00,0x00,0x8d,0x04,0x01,0xac,0x27,0x83,0x89,0x58,
+0x00,0x04,0x20,0x80,0x00,0x83,0x20,0x21,0x8c,0x82,0x00,0x00,0x3c,0x03,0xff,0xff,
+0x00,0x43,0x10,0x24,0x34,0x42,0x00,0x14,0x24,0x03,0x00,0x14,0x08,0x00,0x26,0xcc,
+0xac,0x82,0x00,0x00,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x30,0xc6,0x00,0xff,
+0x00,0x06,0x48,0x40,0x01,0x26,0x10,0x21,0x00,0x02,0x10,0x80,0x27,0x8b,0xbc,0x20,
+0x27,0x83,0xbc,0x26,0x00,0x4b,0x40,0x21,0x00,0x43,0x10,0x21,0x94,0x47,0x00,0x00,
+0x30,0xa2,0x3f,0xff,0x10,0xe2,0x00,0x29,0x30,0x8a,0xff,0xff,0x95,0x02,0x00,0x02,
+0x24,0x03,0x00,0x01,0x00,0x02,0x11,0x82,0x30,0x42,0x00,0x01,0x10,0x43,0x00,0x18,
+0x00,0x00,0x00,0x00,0x01,0x26,0x10,0x21,0x00,0x02,0x10,0x80,0x00,0x4b,0x30,0x21,
+0x94,0xc4,0x00,0x02,0x27,0x83,0xbc,0x26,0x27,0x85,0xbc,0x24,0x00,0x45,0x28,0x21,
+0x30,0x84,0xff,0xdf,0x00,0x43,0x10,0x21,0xa4,0xc4,0x00,0x02,0xa4,0x40,0x00,0x00,
+0xa4,0xa0,0x00,0x00,0x94,0xc3,0x00,0x02,0x3c,0x04,0xb0,0x01,0x01,0x44,0x20,0x21,
+0x30,0x63,0xff,0xbf,0xa4,0xc3,0x00,0x02,0xa0,0xc0,0x00,0x00,0x8c,0x82,0x00,0x04,
+0x24,0x03,0xf0,0xff,0x00,0x43,0x10,0x24,0x03,0xe0,0x00,0x08,0xac,0x82,0x00,0x04,
+0x24,0x02,0xc0,0x00,0x91,0x04,0x00,0x01,0x00,0xa2,0x10,0x24,0x00,0x47,0x28,0x25,
+0x3c,0x03,0xb0,0x01,0x24,0x02,0x00,0x02,0x14,0x82,0xff,0xe2,0x01,0x43,0x18,0x21,
+0xac,0x65,0x00,0x00,0x08,0x00,0x26,0xfa,0x01,0x26,0x10,0x21,0x08,0x00,0x26,0xfa,
+0x01,0x26,0x10,0x21,0x93,0x83,0x81,0xf1,0x24,0x02,0x00,0x01,0x14,0x62,0x00,0x0d,
+0x3c,0x02,0xb0,0x01,0x8c,0x84,0x00,0x04,0x3c,0x06,0xb0,0x09,0x00,0x82,0x20,0x21,
+0x8c,0x85,0x00,0x08,0x8c,0x83,0x00,0x04,0x3c,0x02,0x01,0x00,0x34,0xc6,0x01,0x00,
+0x00,0x62,0x18,0x24,0x14,0x60,0x00,0x05,0x30,0xa5,0x20,0x00,0x24,0x02,0x00,0x06,
+0xa0,0xc2,0x00,0x00,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x3c,0x03,0xb0,0x09,
+0x10,0xa0,0xff,0xfc,0x34,0x63,0x01,0x00,0x24,0x02,0x00,0x0e,0x08,0x00,0x27,0x2d,
+0xa0,0x62,0x00,0x00,0x3c,0x02,0xb0,0x01,0x30,0xa5,0xff,0xff,0x00,0xa2,0x28,0x21,
+0x8c,0xa3,0x00,0x00,0x3c,0x02,0x10,0x00,0x00,0x80,0x30,0x21,0x00,0x62,0x18,0x24,
+0x8c,0xa2,0x00,0x04,0x10,0x60,0x00,0x04,0x00,0x00,0x00,0x00,0x30,0x42,0x80,0x00,
+0x10,0x40,0x00,0x13,0x00,0x00,0x00,0x00,0x8c,0xc2,0x01,0xa8,0x00,0x00,0x00,0x00,
+0x24,0x44,0x00,0x01,0x28,0x83,0x00,0x00,0x24,0x42,0x00,0x40,0x00,0x83,0x10,0x0a,
+0x93,0x83,0x81,0xf0,0x00,0x02,0x11,0x83,0x00,0x02,0x11,0x80,0x00,0x82,0x20,0x23,
+0x24,0x63,0xff,0xff,0xac,0xc4,0x01,0xa8,0xa3,0x83,0x81,0xf0,0x8c,0xc4,0x01,0xac,
+0x8c,0xc2,0x01,0xa8,0x00,0x00,0x00,0x00,0x00,0x44,0x10,0x26,0x00,0x02,0x10,0x2b,
+0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x3c,0x03,0xb0,0x03,0x34,0x63,0x00,0x73,
+0x90,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x42,0x00,0x01,0x14,0x40,0x00,0x04,
+0x00,0x00,0x00,0x00,0xa3,0x80,0x81,0xf1,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,
+0x24,0x02,0x00,0x01,0xa3,0x82,0x81,0xf1,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,
+0x3c,0x02,0xb0,0x03,0x34,0x42,0x00,0xa8,0x8c,0x43,0x00,0x00,0x00,0x00,0x00,0x00,
+0x30,0x62,0x00,0xff,0x00,0x03,0x2e,0x02,0x00,0x02,0x39,0x80,0x2c,0xa2,0x00,0x02,
+0x00,0x03,0x34,0x02,0x10,0x40,0x00,0x05,0x00,0x03,0x1a,0x02,0xa4,0x87,0x01,0xd8,
+0xa0,0x85,0x01,0xd4,0xa0,0x86,0x01,0xd5,0xa0,0x83,0x01,0xd6,0x03,0xe0,0x00,0x08,
+0x00,0x00,0x00,0x00,0x8c,0x82,0x00,0x04,0x3c,0x05,0xb0,0x01,0x00,0x80,0x50,0x21,
+0x00,0x45,0x10,0x21,0x8c,0x43,0x00,0x04,0x24,0x02,0x00,0x05,0x00,0x03,0x1a,0x02,
+0x30,0x69,0x00,0x0f,0x11,0x22,0x00,0x0b,0x24,0x02,0x00,0x07,0x11,0x22,0x00,0x09,
+0x24,0x02,0x00,0x0a,0x11,0x22,0x00,0x07,0x24,0x02,0x00,0x0b,0x11,0x22,0x00,0x05,
+0x24,0x02,0x00,0x01,0x93,0x83,0x81,0xf0,0x3c,0x04,0xb0,0x06,0x10,0x62,0x00,0x03,
+0x34,0x84,0x80,0x18,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,0x8c,0x82,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x02,0x17,0x02,0x14,0x40,0xff,0xfa,0x00,0x00,0x00,0x00,
+0x8d,0x43,0x01,0xa8,0x27,0x82,0x89,0x58,0x00,0x03,0x18,0x80,0x00,0x6a,0x20,0x21,
+0x8c,0x87,0x00,0xa8,0x00,0x62,0x18,0x21,0x8c,0x68,0x00,0x00,0x00,0xe5,0x28,0x21,
+0x8c,0xa9,0x00,0x00,0x3c,0x02,0xff,0xff,0x27,0x83,0x8a,0x58,0x01,0x22,0x10,0x24,
+0x00,0x48,0x10,0x25,0xac,0xa2,0x00,0x00,0x8d,0x44,0x01,0xa8,0x00,0x07,0x30,0xc2,
+0x3c,0x02,0x00,0x80,0x00,0x04,0x20,0x80,0x00,0x83,0x20,0x21,0x00,0x06,0x32,0x00,
+0x8c,0xa9,0x00,0x04,0x00,0xc2,0x30,0x25,0x8c,0x82,0x00,0x00,0x3c,0x03,0x80,0x00,
+0x01,0x22,0x10,0x25,0x00,0x43,0x10,0x25,0xac,0xa2,0x00,0x04,0xaf,0x87,0xbc,0x10,
+0x8c,0xa2,0x00,0x00,0x00,0x00,0x00,0x00,0xaf,0x82,0xbc,0x18,0x8c,0xa3,0x00,0x04,
+0x3c,0x01,0xb0,0x07,0xac,0x26,0x80,0x18,0x8d,0x42,0x01,0xa8,0xaf,0x83,0xbc,0x14,
+0x93,0x85,0x81,0xf0,0x24,0x44,0x00,0x01,0x28,0x83,0x00,0x00,0x24,0x42,0x00,0x40,
+0x00,0x83,0x10,0x0a,0x00,0x02,0x11,0x83,0x00,0x02,0x11,0x80,0x24,0xa5,0xff,0xff,
+0x00,0x82,0x20,0x23,0xad,0x44,0x01,0xa8,0xa3,0x85,0x81,0xf0,0x08,0x00,0x27,0x89,
+0x00,0x00,0x00,0x00,0x3c,0x05,0xb0,0x03,0x3c,0x02,0x80,0x01,0x24,0x42,0x9f,0x04,
+0x34,0xa5,0x00,0x20,0xac,0xa2,0x00,0x00,0x24,0x02,0x00,0x02,0x24,0x03,0x00,0x20,
+0xac,0x82,0x00,0x64,0x3c,0x02,0x80,0x01,0xac,0x83,0x00,0x60,0x00,0x80,0x38,0x21,
+0xac,0x80,0x00,0x00,0xac,0x80,0x00,0x04,0xac,0x80,0x00,0x08,0xac,0x80,0x00,0x4c,
+0xac,0x80,0x00,0x50,0xac,0x80,0x00,0x54,0xac,0x80,0x00,0x0c,0xac,0x80,0x00,0x58,
+0xa0,0x80,0x00,0x5c,0x24,0x83,0x00,0x68,0x24,0x42,0xa0,0x14,0x24,0x04,0x00,0x0f,
+0x24,0x84,0xff,0xff,0xac,0x62,0x00,0x00,0x04,0x81,0xff,0xfd,0x24,0x63,0x00,0x04,
+0x3c,0x02,0xb0,0x03,0x34,0x42,0x00,0xa8,0xac,0xe0,0x01,0xa8,0xac,0xe0,0x01,0xac,
+0xac,0xe0,0x01,0xb0,0xac,0xe0,0x01,0xb4,0xa0,0xe0,0x01,0xb8,0xa0,0xe0,0x01,0xb9,
+0xa0,0xe0,0x01,0xba,0xa0,0xe0,0x01,0xc0,0xa0,0xe0,0x01,0xc1,0xac,0xe0,0x01,0xc4,
+0xac,0xe0,0x01,0xc8,0xac,0xe0,0x01,0xcc,0xac,0xe0,0x01,0xd0,0x8c,0x44,0x00,0x00,
+0x3c,0x02,0x80,0x01,0x24,0x42,0xa0,0xfc,0x30,0x83,0x00,0xff,0x00,0x03,0x19,0x80,
+0xa4,0xe3,0x01,0xd8,0xac,0xe2,0x00,0x78,0x3c,0x03,0x80,0x01,0x3c,0x02,0x80,0x01,
+0x24,0x63,0xa2,0x88,0x24,0x42,0xa1,0xf4,0xac,0xe3,0x00,0x88,0xac,0xe2,0x00,0x98,
+0x3c,0x03,0x80,0x01,0x3c,0x02,0x80,0x01,0x00,0x04,0x2e,0x03,0x00,0x04,0x34,0x03,
+0x24,0x63,0xa3,0x30,0x00,0x04,0x22,0x03,0x24,0x42,0xa4,0x74,0xac,0xe3,0x00,0xa0,
+0xac,0xe2,0x00,0xa4,0xa0,0xe5,0x01,0xd4,0xa0,0xe6,0x01,0xd5,0x03,0xe0,0x00,0x08,
+0xa0,0xe4,0x01,0xd6,0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x01,0x34,0x63,0x00,0x20,
+0x24,0x42,0xa0,0x14,0x03,0xe0,0x00,0x08,0xac,0x62,0x00,0x00,0x3c,0x02,0xb0,0x03,
+0x3c,0x03,0x80,0x01,0x34,0x42,0x00,0x20,0x24,0x63,0xa0,0x2c,0xac,0x43,0x00,0x00,
+0x8c,0x82,0x00,0x10,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x11,0x00,0x80,0x28,0x21,
+0x8c,0x82,0x00,0x14,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x0d,0x00,0x00,0x00,0x00,
+0x8c,0x84,0x00,0x10,0x8c,0xa3,0x00,0x14,0x8c,0xa2,0x00,0x04,0x00,0x83,0x20,0x21,
+0x00,0x44,0x10,0x21,0x30,0x43,0x00,0xff,0x00,0x03,0x18,0x2b,0x00,0x02,0x12,0x02,
+0x00,0x43,0x10,0x21,0x00,0x02,0x12,0x00,0x30,0x42,0x3f,0xff,0xac,0xa2,0x00,0x04,
+0xac,0xa0,0x00,0x00,0xac,0xa0,0x00,0x4c,0xac,0xa0,0x00,0x50,0xac,0xa0,0x00,0x54,
+0x03,0xe0,0x00,0x08,0xac,0xa0,0x00,0x0c,0x3c,0x03,0xb0,0x03,0x3c,0x02,0x80,0x01,
+0x34,0x63,0x00,0x20,0x24,0x42,0xa0,0xa8,0xac,0x62,0x00,0x00,0x8c,0x86,0x00,0x04,
+0x3c,0x02,0xb0,0x01,0x24,0x03,0x00,0x01,0x00,0xc2,0x10,0x21,0x8c,0x45,0x00,0x00,
+0xac,0x83,0x00,0x4c,0x00,0x05,0x14,0x02,0x30,0xa3,0x3f,0xff,0x30,0x42,0x00,0xff,
+0xac,0x83,0x00,0x10,0xac,0x82,0x00,0x14,0x8c,0x83,0x00,0x14,0xac,0x85,0x00,0x40,
+0x00,0xc3,0x30,0x21,0x03,0xe0,0x00,0x08,0xac,0x86,0x00,0x08,0x3c,0x02,0xb0,0x03,
+0x3c,0x03,0x80,0x01,0x27,0xbd,0xff,0xe8,0x34,0x42,0x00,0x20,0x24,0x63,0xa0,0xfc,
+0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x14,0xac,0x43,0x00,0x00,0x8c,0x82,0x00,0x4c,
+0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x0a,0x00,0x80,0x80,0x21,0xae,0x00,0x00,0x00,
+0xae,0x00,0x00,0x4c,0xae,0x00,0x00,0x50,0xae,0x00,0x00,0x54,0xae,0x00,0x00,0x0c,
+0x8f,0xbf,0x00,0x14,0x8f,0xb0,0x00,0x10,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x18,
+0x0c,0x00,0x28,0x2a,0x00,0x00,0x00,0x00,0x08,0x00,0x28,0x4c,0xae,0x00,0x00,0x00,
+0x3c,0x02,0xb0,0x03,0x3c,0x03,0x80,0x01,0x27,0xbd,0xff,0xe8,0x34,0x42,0x00,0x20,
+0x24,0x63,0xa1,0x60,0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x14,0xac,0x43,0x00,0x00,
+0x8c,0x82,0x00,0x4c,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x16,0x00,0x80,0x80,0x21,
+0x8e,0x03,0x00,0x08,0x3c,0x02,0xb0,0x01,0x8e,0x04,0x00,0x44,0x00,0x62,0x18,0x21,
+0x90,0x65,0x00,0x00,0x24,0x02,0x00,0x01,0xae,0x02,0x00,0x50,0x30,0xa3,0x00,0xff,
+0x00,0x03,0x10,0x82,0x00,0x04,0x23,0x02,0x30,0x84,0x00,0x0f,0x30,0x42,0x00,0x03,
+0x00,0x03,0x19,0x02,0xae,0x04,0x00,0x34,0xae,0x02,0x00,0x2c,0xae,0x03,0x00,0x30,
+0xa2,0x05,0x00,0x48,0x8f,0xbf,0x00,0x14,0x8f,0xb0,0x00,0x10,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x18,0x0c,0x00,0x28,0x2a,0x00,0x00,0x00,0x00,0x08,0x00,0x28,0x64,
+0x00,0x00,0x00,0x00,0x3c,0x02,0xb0,0x03,0x3c,0x03,0x80,0x01,0x27,0xbd,0xff,0xe8,
+0x34,0x42,0x00,0x20,0x24,0x63,0xa1,0xf4,0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x14,
+0xac,0x43,0x00,0x00,0x8c,0x82,0x00,0x50,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x16,
+0x00,0x80,0x80,0x21,0x92,0x03,0x00,0x44,0x8e,0x02,0x00,0x40,0x83,0x85,0x8b,0xc4,
+0x92,0x04,0x00,0x41,0x30,0x63,0x00,0x01,0x00,0x02,0x16,0x02,0xae,0x04,0x00,0x14,
+0x00,0x00,0x30,0x21,0xae,0x02,0x00,0x18,0x10,0xa0,0x00,0x04,0xae,0x03,0x00,0x3c,
+0x10,0x60,0x00,0x03,0x24,0x02,0x00,0x01,0x24,0x06,0x00,0x01,0x24,0x02,0x00,0x01,
+0xa3,0x86,0x8b,0xc4,0x8f,0xbf,0x00,0x14,0xae,0x02,0x00,0x54,0x8f,0xb0,0x00,0x10,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x18,0x0c,0x00,0x28,0x58,0x00,0x00,0x00,0x00,
+0x08,0x00,0x28,0x89,0x00,0x00,0x00,0x00,0x3c,0x02,0xb0,0x03,0x3c,0x03,0x80,0x01,
+0x27,0xbd,0xff,0xe8,0x34,0x42,0x00,0x20,0x24,0x63,0xa2,0x88,0xaf,0xb0,0x00,0x10,
+0xaf,0xbf,0x00,0x14,0xac,0x43,0x00,0x00,0x8c,0x82,0x00,0x50,0x00,0x00,0x00,0x00,
+0x10,0x40,0x00,0x1b,0x00,0x80,0x80,0x21,0x3c,0x02,0xb0,0x03,0x8c,0x42,0x00,0x00,
+0x92,0x04,0x00,0x44,0x8e,0x03,0x00,0x40,0x83,0x86,0x8b,0xc4,0x92,0x05,0x00,0x41,
+0x30,0x42,0x08,0x00,0x30,0x84,0x00,0x01,0x00,0x02,0x12,0xc2,0x00,0x03,0x1e,0x02,
+0x00,0x82,0x20,0x25,0xae,0x05,0x00,0x14,0x00,0x00,0x38,0x21,0xae,0x03,0x00,0x18,
+0x10,0xc0,0x00,0x04,0xae,0x04,0x00,0x3c,0x10,0x80,0x00,0x03,0x24,0x02,0x00,0x01,
+0x24,0x07,0x00,0x01,0x24,0x02,0x00,0x01,0xa3,0x87,0x8b,0xc4,0x8f,0xbf,0x00,0x14,
+0xae,0x02,0x00,0x54,0x8f,0xb0,0x00,0x10,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x18,
+0x0c,0x00,0x28,0x58,0x00,0x00,0x00,0x00,0x08,0x00,0x28,0xae,0x00,0x00,0x00,0x00,
+0x3c,0x02,0xb0,0x03,0x3c,0x03,0x80,0x01,0x27,0xbd,0xff,0xe8,0x34,0x42,0x00,0x20,
+0x24,0x63,0xa3,0x30,0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x14,0xac,0x43,0x00,0x00,
+0x8c,0x82,0x00,0x54,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x42,0x00,0x80,0x80,0x21,
+0x8e,0x04,0x00,0x04,0x8e,0x03,0x00,0x44,0x3c,0x02,0x80,0x00,0x3c,0x08,0xb0,0x01,
+0x34,0x42,0x00,0x10,0x00,0x88,0x20,0x21,0x00,0x62,0x18,0x25,0xac,0x83,0x00,0x04,
+0x8e,0x02,0x00,0x04,0x8e,0x03,0x01,0xac,0x27,0x89,0x89,0x58,0x00,0x48,0x10,0x21,
+0x8c,0x45,0x00,0x00,0x00,0x03,0x18,0x80,0x00,0x69,0x18,0x21,0xac,0x65,0x00,0x00,
+0x8e,0x02,0x00,0x04,0x8e,0x03,0x01,0xac,0x27,0x87,0x8a,0x58,0x00,0x48,0x10,0x21,
+0x8c,0x45,0x00,0x04,0x00,0x03,0x18,0x80,0x00,0x67,0x18,0x21,0xac,0x65,0x00,0x00,
+0x8e,0x02,0x01,0xac,0x8e,0x06,0x00,0x04,0x02,0x00,0x20,0x21,0x00,0x02,0x10,0x80,
+0x00,0x47,0x38,0x21,0x94,0xe3,0x00,0x02,0x00,0x49,0x10,0x21,0x90,0x45,0x00,0x00,
+0x00,0x03,0x1a,0x00,0x00,0xc8,0x30,0x21,0x00,0xa3,0x28,0x25,0x0c,0x00,0x26,0x69,
+0xa4,0xc5,0x00,0x2e,0x8e,0x03,0x01,0xac,0x8e,0x07,0x00,0x04,0x3c,0x06,0xb0,0x03,
+0x24,0x65,0x00,0x01,0x28,0xa4,0x00,0x00,0x24,0x62,0x00,0x40,0x00,0xa4,0x10,0x0a,
+0x00,0x02,0x11,0x83,0x00,0x02,0x11,0x80,0x00,0x03,0x18,0x80,0x00,0xa2,0x28,0x23,
+0x00,0x70,0x18,0x21,0xae,0x05,0x01,0xac,0xac,0x67,0x00,0xa8,0x34,0xc6,0x00,0x30,
+0x8c,0xc3,0x00,0x00,0x93,0x82,0x81,0xf0,0x02,0x00,0x20,0x21,0x24,0x63,0x00,0x01,
+0x24,0x42,0x00,0x01,0xac,0xc3,0x00,0x00,0xa3,0x82,0x81,0xf0,0x0c,0x00,0x28,0x0b,
+0x00,0x00,0x00,0x00,0x8f,0xbf,0x00,0x14,0x8f,0xb0,0x00,0x10,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x18,0x0c,0x00,0x28,0xa2,0x00,0x00,0x00,0x00,0x08,0x00,0x28,0xd8,
+0x00,0x00,0x00,0x00,0x3c,0x02,0xb0,0x03,0x3c,0x03,0x80,0x01,0x27,0xbd,0xff,0xe8,
+0x34,0x42,0x00,0x20,0x24,0x63,0xa4,0x74,0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x14,
+0xac,0x43,0x00,0x00,0x8c,0x82,0x00,0x54,0x00,0x00,0x00,0x00,0x10,0x40,0x00,0x42,
+0x00,0x80,0x80,0x21,0x8e,0x04,0x00,0x04,0x8e,0x03,0x00,0x44,0x3c,0x02,0x80,0x00,
+0x3c,0x08,0xb0,0x01,0x34,0x42,0x00,0x10,0x00,0x88,0x20,0x21,0x00,0x62,0x18,0x25,
+0xac,0x83,0x00,0x04,0x8e,0x02,0x00,0x04,0x8e,0x03,0x01,0xac,0x27,0x89,0x89,0x58,
+0x00,0x48,0x10,0x21,0x8c,0x45,0x00,0x00,0x00,0x03,0x18,0x80,0x00,0x69,0x18,0x21,
+0xac,0x65,0x00,0x00,0x8e,0x02,0x00,0x04,0x8e,0x03,0x01,0xac,0x27,0x87,0x8a,0x58,
+0x00,0x48,0x10,0x21,0x8c,0x45,0x00,0x04,0x00,0x03,0x18,0x80,0x00,0x67,0x18,0x21,
+0xac,0x65,0x00,0x00,0x8e,0x02,0x01,0xac,0x8e,0x06,0x00,0x04,0x02,0x00,0x20,0x21,
+0x00,0x02,0x10,0x80,0x00,0x47,0x38,0x21,0x94,0xe3,0x00,0x02,0x00,0x49,0x10,0x21,
+0x90,0x45,0x00,0x00,0x00,0x03,0x1a,0x00,0x00,0xc8,0x30,0x21,0x00,0xa3,0x28,0x25,
+0x0c,0x00,0x26,0x69,0xa4,0xc5,0x00,0x2e,0x8e,0x03,0x01,0xac,0x8e,0x07,0x00,0x04,
+0x3c,0x06,0xb0,0x03,0x24,0x65,0x00,0x01,0x28,0xa4,0x00,0x00,0x24,0x62,0x00,0x40,
+0x00,0xa4,0x10,0x0a,0x00,0x02,0x11,0x83,0x00,0x02,0x11,0x80,0x00,0x03,0x18,0x80,
+0x00,0xa2,0x28,0x23,0x00,0x70,0x18,0x21,0xae,0x05,0x01,0xac,0xac,0x67,0x00,0xa8,
+0x34,0xc6,0x00,0x30,0x8c,0xc3,0x00,0x00,0x93,0x82,0x81,0xf0,0x02,0x00,0x20,0x21,
+0x24,0x63,0x00,0x01,0x24,0x42,0x00,0x01,0xac,0xc3,0x00,0x00,0xa3,0x82,0x81,0xf0,
+0x0c,0x00,0x28,0x0b,0x00,0x00,0x00,0x00,0x8f,0xbf,0x00,0x14,0x8f,0xb0,0x00,0x10,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x18,0x0c,0x00,0x28,0xa2,0x00,0x00,0x00,0x00,
+0x08,0x00,0x29,0x29,0x00,0x00,0x00,0x00,0x3c,0x02,0xb0,0x03,0x3c,0x03,0x80,0x01,
+0x27,0xbd,0xff,0xd8,0x34,0x42,0x00,0x20,0x24,0x63,0xa5,0xb8,0xaf,0xb2,0x00,0x18,
+0xac,0x43,0x00,0x00,0x3c,0x12,0xb0,0x03,0x3c,0x02,0x80,0x01,0xaf,0xb4,0x00,0x20,
+0xaf,0xb3,0x00,0x1c,0xaf,0xb1,0x00,0x14,0xaf,0xb0,0x00,0x10,0xaf,0xbf,0x00,0x24,
+0x00,0x80,0x80,0x21,0x24,0x54,0xa0,0x14,0x00,0x00,0x88,0x21,0x3c,0x13,0xb0,0x01,
+0x36,0x52,0x00,0xef,0x3c,0x02,0xb0,0x09,0x34,0x42,0x00,0x06,0x90,0x43,0x00,0x00,
+0x8e,0x04,0x00,0x04,0x92,0x02,0x01,0xbb,0x30,0x69,0x00,0xff,0x00,0x04,0x42,0x02,
+0x10,0x40,0x00,0x1e,0x00,0x00,0x38,0x21,0x8e,0x03,0x01,0xa8,0x3c,0x06,0x28,0x38,
+0x34,0xc6,0x00,0x20,0x24,0x64,0x00,0x3d,0x28,0x82,0x00,0x00,0x24,0x63,0x00,0x7c,
+0x00,0x82,0x18,0x0a,0x00,0x03,0x19,0x83,0x00,0x03,0x19,0x80,0x00,0x83,0x20,0x23,
+0x00,0x04,0x10,0x80,0x00,0x50,0x10,0x21,0x8c,0x45,0x00,0xa8,0xae,0x04,0x01,0xac,
+0xae,0x04,0x01,0xa8,0x00,0xb3,0x18,0x21,0xae,0x05,0x00,0x04,0xac,0x66,0x00,0x00,
+0x8e,0x02,0x00,0x04,0x3c,0x03,0x80,0x00,0x34,0x63,0x4e,0x00,0x00,0x53,0x10,0x21,
+0xac,0x43,0x00,0x04,0xa2,0x00,0x01,0xbb,0x93,0x83,0x81,0xf7,0x00,0x00,0x00,0x00,
+0x24,0x62,0x00,0x01,0xa3,0x82,0x81,0xf7,0xa2,0x43,0x00,0x00,0x01,0x28,0x10,0x23,
+0x24,0x44,0x00,0x40,0x28,0x83,0x00,0x00,0x24,0x42,0x00,0x7f,0x00,0x83,0x10,0x0a,
+0x00,0x02,0x11,0x83,0x00,0x02,0x11,0x80,0x24,0x84,0xff,0xff,0x10,0x44,0x00,0x6b,
+0x3c,0x02,0xb0,0x01,0x8e,0x03,0x00,0x04,0x3c,0x04,0x7c,0x00,0x00,0x62,0x18,0x21,
+0x8c,0x65,0x00,0x04,0x34,0x84,0x00,0xf0,0x00,0x00,0x30,0x21,0xae,0x05,0x00,0x44,
+0x00,0xa4,0x20,0x24,0x8c,0x63,0x00,0x00,0x10,0x80,0x00,0x6b,0x3c,0x02,0xff,0xff,
+0x3c,0x09,0xb0,0x03,0x3c,0x05,0x7c,0x00,0x35,0x29,0x00,0x99,0x3c,0x0a,0xb0,0x01,
+0x24,0x08,0x00,0x40,0x34,0xa5,0x00,0xf0,0x3c,0x0b,0xff,0xff,0x3c,0x0c,0x28,0x38,
+0x16,0x20,0x00,0x06,0x24,0xe7,0x00,0x01,0x93,0x82,0x81,0xf6,0x24,0x11,0x00,0x01,
+0x24,0x42,0x00,0x01,0xa1,0x22,0x00,0x00,0xa3,0x82,0x81,0xf6,0x8e,0x02,0x00,0x04,
+0x24,0x06,0x00,0x01,0x24,0x42,0x01,0x00,0x30,0x42,0x3f,0xff,0xae,0x02,0x00,0x04,
+0x00,0x4a,0x10,0x21,0x8c,0x43,0x00,0x04,0x00,0x00,0x00,0x00,0xae,0x03,0x00,0x44,
+0x00,0x65,0x20,0x24,0x8c,0x43,0x00,0x00,0x10,0xe8,0x00,0x2d,0x00,0x00,0x00,0x00,
+0x14,0x80,0xff,0xeb,0x00,0x6b,0x10,0x24,0x14,0x4c,0xff,0xe9,0x24,0x02,0x00,0x01,
+0x10,0xc2,0x00,0x30,0x3c,0x03,0xb0,0x09,0x8e,0x02,0x00,0x44,0x8e,0x04,0x00,0x60,
+0x00,0x02,0x1e,0x42,0x00,0x02,0x12,0x02,0x30,0x42,0x00,0x0f,0x30,0x63,0x00,0x01,
+0xae,0x02,0x00,0x00,0x10,0x44,0x00,0x1a,0xae,0x03,0x00,0x58,0x8e,0x02,0x00,0x64,
+0x8e,0x04,0x00,0x58,0x00,0x00,0x00,0x00,0x10,0x82,0x00,0x05,0x00,0x00,0x00,0x00,
+0xae,0x00,0x00,0x4c,0xae,0x00,0x00,0x50,0xae,0x00,0x00,0x54,0xae,0x00,0x00,0x0c,
+0x8e,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x10,0x80,0x00,0x50,0x10,0x21,
+0x8c,0x42,0x00,0x68,0x00,0x00,0x00,0x00,0x10,0x54,0x00,0x06,0x00,0x00,0x00,0x00,
+0x00,0x40,0xf8,0x09,0x02,0x00,0x20,0x21,0x8e,0x04,0x00,0x58,0x8e,0x03,0x00,0x00,
+0x00,0x00,0x00,0x00,0xae,0x03,0x00,0x60,0x08,0x00,0x29,0x81,0xae,0x04,0x00,0x64,
+0x8e,0x02,0x00,0x64,0x00,0x00,0x00,0x00,0x14,0x62,0xff,0xe5,0x00,0x00,0x00,0x00,
+0x7a,0x02,0x0d,0x7c,0x8f,0xbf,0x00,0x24,0x8f,0xb4,0x00,0x20,0x7b,0xb2,0x00,0xfc,
+0x7b,0xb0,0x00,0xbc,0x00,0x43,0x10,0x26,0x00,0x02,0x10,0x2b,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x28,0x8e,0x04,0x00,0x04,0x34,0x63,0x00,0x06,0x90,0x62,0x00,0x00,
+0x00,0x04,0x42,0x02,0x00,0x48,0x10,0x23,0x24,0x44,0x00,0x40,0x28,0x83,0x00,0x00,
+0x24,0x42,0x00,0x7f,0x00,0x83,0x10,0x0a,0x00,0x02,0x11,0x83,0x00,0x02,0x11,0x80,
+0x00,0x82,0x20,0x23,0x14,0x86,0xff,0xc4,0x00,0x00,0x00,0x00,0x8e,0x03,0x00,0x00,
+0x00,0x00,0x00,0x00,0x2c,0x62,0x00,0x03,0x14,0x40,0x00,0x05,0x24,0x02,0x00,0x0d,
+0x10,0x62,0x00,0x03,0x24,0x02,0x00,0x01,0x08,0x00,0x2a,0x04,0xa2,0x02,0x00,0x5c,
+0x08,0x00,0x2a,0x04,0xa2,0x00,0x00,0x5c,0x00,0x62,0x10,0x24,0x3c,0x03,0x28,0x38,
+0x14,0x43,0xff,0x93,0x24,0x02,0x00,0x01,0x08,0x00,0x29,0xdc,0x00,0x00,0x00,0x00,
+0x3c,0x02,0xb0,0x01,0x00,0xa2,0x40,0x21,0x00,0xa0,0x48,0x21,0x8d,0x05,0x00,0x00,
+0x24,0x02,0xc0,0x00,0x00,0x09,0x38,0xc2,0x00,0xa2,0x28,0x24,0x24,0xc2,0xff,0xff,
+0x00,0x07,0x3a,0x00,0x3c,0x0a,0xb0,0x06,0x3c,0x03,0x00,0x80,0x00,0xa6,0x28,0x25,
+0x2c,0x42,0x1f,0xff,0x00,0xe3,0x38,0x25,0x35,0x4a,0x80,0x18,0x10,0x40,0x00,0x0e,
+0xad,0x05,0x00,0x00,0xaf,0x89,0xbc,0x10,0x8d,0x02,0x00,0x00,0x00,0x00,0x00,0x00,
+0xaf,0x82,0xbc,0x18,0x8d,0x03,0x00,0x04,0xad,0x47,0x00,0x00,0xaf,0x83,0xbc,0x14,
+0xac,0x80,0x01,0xd0,0xac,0x80,0x01,0xc4,0xa0,0x80,0x01,0xc0,0xa0,0x80,0x01,0xc1,
+0xac,0x80,0x01,0xc8,0xac,0x80,0x01,0xcc,0x03,0xe0,0x00,0x08,0x00,0x00,0x00,0x00,
+0x27,0xbd,0xff,0xe8,0xaf,0xbf,0x00,0x10,0x8c,0x83,0x01,0xc4,0x00,0x80,0x38,0x21,
+0x90,0x84,0x01,0xc0,0x00,0x03,0x18,0x80,0x00,0x67,0x18,0x21,0x8c,0x65,0x00,0xa8,
+0x3c,0x02,0xb0,0x01,0x24,0x03,0x00,0x01,0x00,0xa2,0x10,0x21,0x8c,0x42,0x00,0x00,
+0x10,0x83,0x00,0x18,0x00,0x02,0x14,0x02,0x8c,0xe9,0x01,0xcc,0x8c,0xea,0x01,0xc8,
+0x30,0x46,0x00,0xff,0x01,0x2a,0x18,0x21,0x30,0x64,0x00,0xff,0x00,0x03,0x1a,0x02,
+0x24,0x62,0x00,0x01,0x14,0x80,0x00,0x02,0x30,0x48,0x00,0xff,0x30,0x68,0x00,0xff,
+0x90,0xe2,0x01,0xc1,0x00,0x00,0x00,0x00,0x00,0x48,0x10,0x23,0x00,0x02,0x12,0x00,
+0x00,0x49,0x10,0x21,0x00,0x4a,0x10,0x21,0x00,0x46,0x30,0x23,0x0c,0x00,0x2a,0x2c,
+0x00,0xe0,0x20,0x21,0x8f,0xbf,0x00,0x10,0x00,0x00,0x00,0x00,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x18,0x8c,0xe6,0x01,0xc8,0x08,0x00,0x2a,0x6b,0x00,0x00,0x00,0x00,
+0x27,0xbd,0xff,0xe8,0xaf,0xbf,0x00,0x14,0xaf,0xb0,0x00,0x10,0x8c,0x82,0x01,0xc4,
+0x90,0x87,0x01,0xc1,0x00,0x80,0x80,0x21,0x00,0x02,0x10,0x80,0x00,0x44,0x10,0x21,
+0x8c,0x48,0x00,0xa8,0x3c,0x02,0xb0,0x01,0x00,0x07,0x3a,0x00,0x01,0x02,0x10,0x21,
+0x8c,0x43,0x00,0x00,0x00,0xe5,0x38,0x21,0x00,0xe6,0x38,0x21,0x00,0x03,0x1c,0x02,
+0x30,0x63,0x00,0xff,0x00,0xe3,0x38,0x23,0x01,0x00,0x28,0x21,0x0c,0x00,0x2a,0x2c,
+0x00,0xe0,0x30,0x21,0x8e,0x02,0x01,0xa8,0x8f,0xbf,0x00,0x14,0x24,0x44,0x00,0x01,
+0x28,0x83,0x00,0x00,0x24,0x42,0x00,0x40,0x00,0x83,0x10,0x0a,0x00,0x02,0x11,0x83,
+0x00,0x02,0x11,0x80,0x00,0x82,0x20,0x23,0xae,0x04,0x01,0xa8,0x8f,0xb0,0x00,0x10,
+0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x18,0x3c,0x02,0xb0,0x03,0x3c,0x03,0x80,0x01,
+0x27,0xbd,0xff,0xe8,0x34,0x42,0x00,0x20,0x24,0x63,0xaa,0x58,0xaf,0xb0,0x00,0x10,
+0xaf,0xbf,0x00,0x14,0xac,0x43,0x00,0x00,0x90,0x82,0x01,0xd4,0x00,0x00,0x00,0x00,
+0x14,0x40,0x00,0x6a,0x00,0x80,0x80,0x21,0x90,0x82,0x01,0xc0,0x00,0x00,0x00,0x00,
+0x14,0x40,0x00,0x61,0x00,0x00,0x00,0x00,0x8c,0x83,0x01,0xa8,0x8c,0x82,0x01,0xac,
+0x00,0x00,0x00,0x00,0x10,0x62,0x00,0x22,0x00,0x00,0x28,0x21,0x93,0x82,0x81,0xf1,
+0x00,0x03,0x30,0x80,0x00,0xc4,0x18,0x21,0x24,0x04,0x00,0x01,0x8c,0x67,0x00,0xa8,
+0x10,0x44,0x00,0x20,0x3c,0x04,0xb0,0x01,0xaf,0x87,0xbc,0x10,0x00,0xe4,0x20,0x21,
+0x8c,0x86,0x00,0x00,0x00,0x07,0x18,0xc2,0x3c,0x02,0x00,0x80,0xaf,0x86,0xbc,0x18,
+0x8c,0x86,0x00,0x04,0x00,0x03,0x1a,0x00,0x3c,0x05,0xb0,0x06,0x00,0x62,0x18,0x25,
+0x34,0xa5,0x80,0x18,0xac,0xa3,0x00,0x00,0x8e,0x02,0x01,0xa8,0x8e,0x09,0x01,0xac,
+0xaf,0x86,0xbc,0x14,0x24,0x44,0x00,0x01,0x28,0x83,0x00,0x00,0x24,0x42,0x00,0x40,
+0x00,0x83,0x10,0x0a,0x00,0x02,0x11,0x83,0x00,0x02,0x11,0x80,0x00,0x82,0x20,0x23,
+0x00,0x80,0x30,0x21,0xae,0x04,0x01,0xa8,0x00,0xc9,0x10,0x26,0x00,0x02,0x28,0x2b,
+0x8f,0xbf,0x00,0x14,0x8f,0xb0,0x00,0x10,0x00,0xa0,0x10,0x21,0x03,0xe0,0x00,0x08,
+0x27,0xbd,0x00,0x18,0x93,0x82,0x81,0xf0,0x00,0x00,0x00,0x00,0x2c,0x42,0x00,0x02,
+0x14,0x40,0xff,0xf7,0x00,0x00,0x28,0x21,0x3c,0x05,0xb0,0x01,0x00,0xe5,0x28,0x21,
+0x27,0x83,0x89,0x58,0x00,0xc3,0x18,0x21,0x8c,0xa6,0x00,0x00,0x8c,0x64,0x00,0x00,
+0x24,0x02,0xc0,0x00,0x00,0xc2,0x10,0x24,0x00,0x44,0x10,0x25,0xac,0xa2,0x00,0x00,
+0x8e,0x03,0x01,0xa8,0x27,0x84,0x8a,0x58,0x8c,0xa6,0x00,0x04,0x00,0x03,0x18,0x80,
+0x00,0x64,0x18,0x21,0x8c,0x62,0x00,0x00,0x3c,0x03,0x80,0x00,0x00,0x07,0x20,0xc2,
+0x00,0xc2,0x10,0x25,0x00,0x43,0x10,0x25,0xac,0xa2,0x00,0x04,0xaf,0x87,0xbc,0x10,
+0x8c,0xa6,0x00,0x00,0x3c,0x02,0x00,0x80,0x00,0x04,0x22,0x00,0x3c,0x03,0xb0,0x06,
+0xaf,0x86,0xbc,0x18,0x00,0x82,0x20,0x25,0x34,0x63,0x80,0x18,0x8c,0xa6,0x00,0x04,
+0xac,0x64,0x00,0x00,0x8e,0x02,0x01,0xa8,0xaf,0x86,0xbc,0x14,0x24,0x44,0x00,0x01,
+0x28,0x83,0x00,0x00,0x24,0x42,0x00,0x40,0x00,0x83,0x10,0x0a,0x93,0x83,0x81,0xf0,
+0x00,0x02,0x11,0x83,0x00,0x02,0x11,0x80,0x00,0x82,0x20,0x23,0x24,0x63,0xff,0xff,
+0xae,0x04,0x01,0xa8,0xa3,0x83,0x81,0xf0,0x8e,0x04,0x01,0xac,0x8e,0x02,0x01,0xa8,
+0x08,0x00,0x2a,0xcb,0x00,0x44,0x10,0x26,0x0c,0x00,0x2a,0x4c,0x00,0x00,0x00,0x00,
+0x7a,0x02,0x0d,0x7c,0x08,0x00,0x2a,0xcb,0x00,0x43,0x10,0x26,0x8c,0x86,0x01,0xa8,
+0x8c,0x89,0x01,0xac,0x00,0x00,0x00,0x00,0x10,0xc9,0x00,0xb4,0x00,0xc0,0x68,0x21,
+0x00,0x06,0x10,0x80,0x27,0x83,0x89,0x58,0x00,0x43,0x18,0x21,0x00,0x44,0x10,0x21,
+0x8c,0x47,0x00,0xa8,0x94,0x65,0x00,0x02,0x3c,0x02,0xb0,0x01,0x00,0xe2,0x10,0x21,
+0x30,0xa5,0x3f,0xff,0xa4,0x45,0x00,0x2c,0x90,0x8a,0x01,0xc0,0x00,0x00,0x00,0x00,
+0x11,0x40,0x00,0x0c,0x00,0x07,0x32,0x02,0x8c,0x83,0x01,0xc4,0x90,0x85,0x01,0xc1,
+0x00,0x03,0x18,0x80,0x00,0x64,0x18,0x21,0x8c,0x62,0x00,0xa8,0x00,0x00,0x00,0x00,
+0x00,0x02,0x12,0x02,0x00,0x45,0x10,0x21,0x30,0x42,0x00,0x3f,0x14,0xc2,0xff,0xde,
+0x00,0x00,0x00,0x00,0x3c,0x04,0xb0,0x01,0x00,0xe4,0x40,0x21,0x8d,0x06,0x00,0x00,
+0x00,0x0d,0x28,0x80,0x00,0x06,0x14,0x02,0x30,0x4b,0x00,0xff,0x00,0xeb,0x70,0x21,
+0x01,0xc4,0x20,0x21,0x90,0x83,0x00,0x00,0x27,0x82,0x89,0x58,0x00,0xa2,0x28,0x21,
+0x8c,0xa4,0x00,0x00,0x00,0x03,0x18,0x82,0x30,0x63,0x00,0x03,0x2c,0x62,0x00,0x02,
+0x14,0x40,0x00,0x66,0x30,0x8c,0x3f,0xff,0x24,0x02,0x00,0x02,0x10,0x62,0x00,0x61,
+0x2d,0x82,0x08,0x00,0x15,0x40,0x00,0x36,0x01,0x6c,0x10,0x21,0x01,0x6c,0x18,0x21,
+0x30,0x62,0x00,0xff,0x00,0x02,0x10,0x2b,0x00,0x03,0x1a,0x02,0x3c,0x04,0xb0,0x01,
+0x00,0x62,0x18,0x21,0x00,0xe4,0x20,0x21,0x24,0x02,0x00,0x01,0xa2,0x03,0x01,0xc1,
+0xa0,0x82,0x00,0x08,0x8e,0x06,0x01,0xa8,0x3c,0x03,0xb0,0x00,0x34,0x63,0xff,0xf4,
+0x24,0xc5,0x00,0x01,0x28,0xa4,0x00,0x00,0x24,0xc2,0x00,0x40,0x00,0xa4,0x10,0x0a,
+0x01,0xc3,0x18,0x21,0xa4,0x6c,0x00,0x00,0x00,0x02,0x11,0x83,0x00,0x02,0x11,0x80,
+0x92,0x04,0x01,0xc0,0x00,0xa2,0x38,0x23,0x3c,0x03,0xb0,0x03,0xae,0x0b,0x01,0xcc,
+0xae,0x0c,0x01,0xc8,0xae,0x06,0x01,0xc4,0xae,0x07,0x01,0xa8,0x34,0x63,0x01,0x08,
+0x92,0x05,0x01,0xd6,0x8c,0x66,0x00,0x00,0x24,0x84,0x00,0x01,0x30,0x82,0x00,0xff,
+0x00,0x45,0x10,0x2b,0xae,0x06,0x01,0xd0,0x10,0x40,0x00,0x07,0xa2,0x04,0x01,0xc0,
+0x92,0x02,0x01,0xd5,0x92,0x03,0x01,0xc1,0x24,0x42,0xff,0xfc,0x00,0x62,0x18,0x2a,
+0x14,0x60,0x00,0x08,0x00,0x00,0x00,0x00,0x02,0x00,0x20,0x21,0x0c,0x00,0x2a,0x4c,
+0x00,0x00,0x00,0x00,0x8e,0x09,0x01,0xac,0x8e,0x06,0x01,0xa8,0x08,0x00,0x2a,0xcb,
+0x00,0xc9,0x10,0x26,0x8e,0x09,0x01,0xac,0x08,0x00,0x2a,0xca,0x00,0xe0,0x30,0x21,
+0x30,0x43,0x00,0xff,0x92,0x07,0x01,0xc1,0x00,0x02,0x12,0x02,0x30,0x44,0x00,0xff,
+0x38,0x63,0x00,0x00,0x24,0x46,0x00,0x01,0x92,0x05,0x01,0xd5,0x00,0x83,0x30,0x0a,
+0x00,0xc7,0x18,0x21,0x00,0xa3,0x10,0x2a,0x14,0x40,0xff,0xeb,0x00,0x00,0x00,0x00,
+0x24,0xa2,0xff,0xfc,0x00,0x62,0x10,0x2a,0x10,0x40,0x00,0x07,0x01,0x80,0x28,0x21,
+0x92,0x03,0x01,0xd6,0x25,0x42,0x00,0x01,0x00,0x43,0x10,0x2a,0x14,0x40,0x00,0x07,
+0x25,0xa4,0x00,0x01,0x01,0x80,0x28,0x21,0x01,0x60,0x30,0x21,0x0c,0x00,0x2a,0x74,
+0x02,0x00,0x20,0x21,0x08,0x00,0x2b,0x6d,0x00,0x00,0x00,0x00,0x28,0x83,0x00,0x00,
+0x25,0xa2,0x00,0x40,0x00,0x83,0x10,0x0a,0x00,0x02,0x11,0x83,0x00,0x02,0x11,0x80,
+0x00,0x82,0x20,0x23,0x00,0xc7,0x18,0x21,0x25,0x42,0x00,0x01,0x00,0x80,0x30,0x21,
+0xa2,0x03,0x01,0xc1,0xae,0x0b,0x01,0xcc,0xae,0x0c,0x01,0xc8,0x08,0x00,0x2a,0xc9,
+0xa2,0x02,0x01,0xc0,0x14,0x40,0xff,0x9f,0x00,0x00,0x00,0x00,0x15,0x40,0x00,0x14,
+0x24,0x02,0xc0,0x00,0x00,0xc2,0x10,0x24,0x00,0x4c,0x10,0x25,0xad,0x02,0x00,0x00,
+0xaf,0x87,0xbc,0x10,0x8d,0x05,0x00,0x00,0x00,0x07,0x18,0xc2,0x3c,0x02,0x00,0x80,
+0x00,0x03,0x1a,0x00,0x3c,0x04,0xb0,0x06,0xaf,0x85,0xbc,0x18,0x00,0x62,0x18,0x25,
+0x34,0x84,0x80,0x18,0x8d,0x05,0x00,0x04,0xac,0x83,0x00,0x00,0x8e,0x02,0x01,0xa8,
+0x8e,0x09,0x01,0xac,0xaf,0x85,0xbc,0x14,0x08,0x00,0x2a,0xc2,0x24,0x44,0x00,0x01,
+0x01,0x6c,0x10,0x21,0x30,0x45,0x00,0xff,0x92,0x04,0x01,0xc1,0x00,0x02,0x12,0x02,
+0x30,0x46,0x00,0xff,0x38,0xa5,0x00,0x00,0x24,0x42,0x00,0x01,0x92,0x03,0x01,0xd5,
+0x00,0xc5,0x10,0x0a,0x00,0x82,0x20,0x21,0x00,0x64,0x18,0x2a,0x10,0x60,0xff,0xca,
+0x01,0x80,0x28,0x21,0x08,0x00,0x2b,0x6b,0x02,0x00,0x20,0x21,0x90,0x87,0x01,0xc0,
+0x00,0x00,0x00,0x00,0x10,0xe0,0xff,0x06,0x00,0x00,0x28,0x21,0x3c,0x02,0xb0,0x03,
+0x34,0x42,0x01,0x08,0x94,0x83,0x01,0xd8,0x8c,0x88,0x01,0xd0,0x8c,0x45,0x00,0x00,
+0x01,0x03,0x18,0x21,0x00,0xa3,0x10,0x2b,0x10,0x40,0x00,0x0b,0x2c,0xe2,0x00,0x02,
+0x00,0xa8,0x10,0x2b,0x10,0x40,0xfe,0xf9,0x00,0xc9,0x10,0x26,0x3c,0x02,0x80,0x00,
+0x00,0x62,0x18,0x21,0x00,0xa2,0x10,0x21,0x00,0x43,0x10,0x2b,0x14,0x40,0xfe,0xf3,
+0x00,0xc9,0x10,0x26,0x2c,0xe2,0x00,0x02,0x10,0x40,0xff,0x90,0x00,0x00,0x00,0x00,
+0x24,0x02,0x00,0x01,0x14,0xe2,0xfe,0xed,0x00,0xc9,0x10,0x26,0x3c,0x03,0xb0,0x06,
+0x34,0x63,0x80,0x18,0x8c,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x17,0x02,
+0x14,0x40,0xfe,0xe5,0x00,0x00,0x00,0x00,0x08,0x00,0x2b,0x6b,0x00,0x00,0x00,0x00,
+0x3c,0x04,0xb0,0x03,0x3c,0x06,0xb0,0x07,0x3c,0x02,0x80,0x01,0x34,0xc6,0x00,0x18,
+0x34,0x84,0x00,0x20,0x24,0x42,0xaf,0xa0,0x24,0x03,0xff,0x83,0xac,0x82,0x00,0x00,
+0xa0,0xc3,0x00,0x00,0x90,0xc4,0x00,0x00,0x27,0xbd,0xff,0xf8,0x3c,0x03,0xb0,0x07,
+0x24,0x02,0xff,0x82,0xa3,0xa4,0x00,0x00,0xa0,0x62,0x00,0x00,0x90,0x64,0x00,0x00,
+0x3c,0x02,0xb0,0x07,0x34,0x42,0x00,0x08,0xa3,0xa4,0x00,0x01,0xa0,0x40,0x00,0x00,
+0x90,0x43,0x00,0x00,0x24,0x02,0x00,0x03,0x3c,0x05,0xb0,0x07,0xa3,0xa3,0x00,0x00,
+0xa0,0xc2,0x00,0x00,0x90,0xc4,0x00,0x00,0x34,0xa5,0x00,0x10,0x24,0x02,0x00,0x06,
+0x3c,0x03,0xb0,0x07,0xa3,0xa4,0x00,0x00,0x34,0x63,0x00,0x38,0xa0,0xa2,0x00,0x00,
+0x90,0x64,0x00,0x00,0x3c,0x02,0xb0,0x07,0x34,0x42,0x00,0x20,0xa3,0xa4,0x00,0x00,
+0xa0,0xa0,0x00,0x00,0x90,0xa3,0x00,0x00,0xaf,0x82,0xbf,0x20,0xa3,0xa3,0x00,0x00,
+0xa0,0x40,0x00,0x00,0x90,0x43,0x00,0x00,0x03,0xe0,0x00,0x08,0x27,0xbd,0x00,0x08,
+};
+
+u8 rtl8190_fwdata_array[] ={
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x10,0x00,0x08,0x00,
+0x02,0xe9,0x01,0x74,0x02,0xab,0x01,0xc7,0x01,0x55,0x00,0xe4,0x00,0xab,0x00,0x72,
+0x00,0x55,0x00,0x4c,0x00,0x4c,0x00,0x4c,0x00,0x4c,0x00,0x4c,0x02,0x76,0x01,0x3b,
+0x00,0xd2,0x00,0x9e,0x00,0x69,0x00,0x4f,0x00,0x46,0x00,0x3f,0x01,0x3b,0x00,0x9e,
+0x00,0x69,0x00,0x4f,0x00,0x35,0x00,0x27,0x00,0x23,0x00,0x20,0x01,0x2f,0x00,0x98,
+0x00,0x65,0x00,0x4c,0x00,0x33,0x00,0x26,0x00,0x22,0x00,0x1e,0x00,0x98,0x00,0x4c,
+0x00,0x33,0x00,0x26,0x00,0x19,0x00,0x13,0x00,0x11,0x00,0x0f,0x02,0x39,0x01,0x1c,
+0x00,0xbd,0x00,0x8e,0x00,0x5f,0x00,0x47,0x00,0x3f,0x00,0x39,0x01,0x1c,0x00,0x8e,
+0x00,0x5f,0x00,0x47,0x00,0x2f,0x00,0x23,0x00,0x20,0x00,0x1c,0x01,0x11,0x00,0x89,
+0x00,0x5b,0x00,0x44,0x00,0x2e,0x00,0x22,0x00,0x1e,0x00,0x1b,0x00,0x89,0x00,0x44,
+0x00,0x2e,0x00,0x22,0x00,0x17,0x00,0x11,0x00,0x0f,0x00,0x0e,0x02,0xab,0x02,0xab,
+0x02,0x66,0x02,0x66,0x07,0x06,0x06,0x06,0x05,0x06,0x07,0x08,0x04,0x06,0x07,0x08,
+0x09,0x0a,0x0b,0x0b,0x49,0x6e,0x74,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x54,0x4c,
+0x42,0x4d,0x4f,0x44,0x00,0x00,0x00,0x00,0x54,0x4c,0x42,0x4c,0x5f,0x64,0x61,0x74,
+0x61,0x00,0x54,0x4c,0x42,0x53,0x00,0x00,0x00,0x00,0x00,0x00,0x41,0x64,0x45,0x4c,
+0x5f,0x64,0x61,0x74,0x61,0x00,0x41,0x64,0x45,0x53,0x00,0x00,0x00,0x00,0x00,0x00,
+0x45,0x78,0x63,0x43,0x6f,0x64,0x65,0x36,0x00,0x00,0x45,0x78,0x63,0x43,0x6f,0x64,
+0x65,0x37,0x00,0x00,0x53,0x79,0x73,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x42,0x70,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x52,0x49,0x00,0x00,0x00,0x00,0x00,0x00,
+0x00,0x00,0x43,0x70,0x55,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x4f,0x76,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x01,0x0b,0x53,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x00,0x00,0x00,0x10,0x00,0x00,0x00,0x2c,
+0x00,0x00,0x00,0x58,0x00,0x00,0x00,0x30,0x00,0x00,0x00,0x48,0x00,0x00,0x00,0x60,
+0x00,0x00,0x00,0x90,0x00,0x00,0x00,0xc0,0x00,0x00,0x01,0x20,0x00,0x00,0x01,0x80,
+0x00,0x00,0x01,0xb0,0x00,0x00,0x00,0x34,0x00,0x00,0x00,0x68,0x00,0x00,0x00,0x9c,
+0x00,0x00,0x00,0xd0,0x00,0x00,0x01,0x38,0x00,0x00,0x01,0xa0,0x00,0x00,0x01,0xd4,
+0x00,0x00,0x02,0x08,0x00,0x00,0x00,0x68,0x00,0x00,0x00,0xd0,0x00,0x00,0x01,0x38,
+0x00,0x00,0x01,0xa0,0x00,0x00,0x02,0x6f,0x00,0x00,0x03,0x40,0x00,0x00,0x03,0xa8,
+0x00,0x00,0x04,0x10,0x01,0x01,0x01,0x02,0x01,0x01,0x02,0x02,0x03,0x03,0x04,0x04,
+0x01,0x01,0x02,0x02,0x03,0x03,0x04,0x04,0x02,0x03,0x03,0x04,0x05,0x06,0x07,0x08,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x07,0x74,0x80,0x00,0x07,0x88,
+0x80,0x00,0x07,0x88,0x80,0x00,0x07,0x78,0x80,0x00,0x07,0x78,0x80,0x00,0x07,0x9c,
+0x80,0x00,0x53,0xc4,0x80,0x00,0x54,0x24,0x80,0x00,0x54,0x38,0x80,0x00,0x54,0x5c,
+0x80,0x00,0x54,0x68,0x80,0x00,0x54,0xa8,0x80,0x00,0x56,0xa8,0x80,0x00,0x57,0xec,
+0x80,0x00,0x58,0x14,0x80,0x00,0x59,0x0c,0x80,0x00,0x59,0xc4,0x80,0x00,0x5a,0x6c,
+0x80,0x00,0x5a,0xe0,0x80,0x00,0x5b,0xec,0x80,0x00,0x5c,0x24,0x80,0x00,0x5c,0x38,
+0x80,0x00,0x5c,0x4c,0x80,0x00,0x5d,0x40,0x80,0x00,0x5d,0x80,0x80,0x00,0x5e,0x34,
+0x80,0x00,0x5e,0x5c,0x80,0x00,0x56,0x68,0x80,0x00,0x5e,0x78,0x80,0x00,0x88,0xf8,
+0x80,0x00,0x88,0xf8,0x80,0x00,0x88,0xf8,0x80,0x00,0x89,0x2c,0x80,0x00,0x89,0x6c,
+0x80,0x00,0x89,0xa4,0x80,0x00,0x89,0xd4,0x80,0x00,0x8a,0x10,0x80,0x00,0x8a,0x50,
+0x80,0x00,0x8a,0xb8,0x80,0x00,0x8a,0xcc,0x80,0x00,0x8b,0x08,0x80,0x00,0x8b,0x10,
+0x80,0x00,0x8b,0x4c,0x80,0x00,0x8b,0x60,0x80,0x00,0x8b,0x68,0x80,0x00,0x8b,0x70,
+0x80,0x00,0x8b,0x70,0x80,0x00,0x8b,0x70,0x80,0x00,0x8b,0x70,0x80,0x00,0x8a,0x90,
+0x80,0x00,0x8b,0xa0,0x80,0x00,0x8b,0xb4,0x80,0x00,0x88,0x54,0x80,0x00,0x8e,0xc8,
+0x80,0x00,0x8e,0xc8,0x80,0x00,0x8e,0xc8,0x80,0x00,0x8e,0xfc,0x80,0x00,0x8f,0x3c,
+0x80,0x00,0x8f,0x74,0x80,0x00,0x8f,0xa4,0x80,0x00,0x8f,0xe0,0x80,0x00,0x90,0x20,
+0x80,0x00,0x90,0x88,0x80,0x00,0x90,0x9c,0x80,0x00,0x90,0xd8,0x80,0x00,0x90,0xe0,
+0x80,0x00,0x91,0x1c,0x80,0x00,0x91,0x30,0x80,0x00,0x91,0x38,0x80,0x00,0x91,0x40,
+0x80,0x00,0x91,0x40,0x80,0x00,0x91,0x40,0x80,0x00,0x91,0x40,0x80,0x00,0x90,0x60,
+0x80,0x00,0x91,0x70,0x80,0x00,0x91,0x84,0x80,0x00,0x8d,0x00,};
+
+u32 Rtl8192UsbPHY_REGArray[] = {
+0x0, };
+
+u32 Rtl8192UsbPHY_REG_1T2RArray[] = {
+0x800,0x00000000,
+0x804,0x00000001,
+0x808,0x0000fc00,
+0x80c,0x0000001c,
+0x810,0x801010aa,
+0x814,0x008514d0,
+0x818,0x00000040,
+0x81c,0x00000000,
+0x820,0x00000004,
+0x824,0x00690000,
+0x828,0x00000004,
+0x82c,0x00e90000,
+0x830,0x00000004,
+0x834,0x00690000,
+0x838,0x00000004,
+0x83c,0x00e90000,
+0x840,0x00000000,
+0x844,0x00000000,
+0x848,0x00000000,
+0x84c,0x00000000,
+0x850,0x00000000,
+0x854,0x00000000,
+0x858,0x65a965a9,
+0x85c,0x65a965a9,
+0x860,0x001f0010,
+0x864,0x007f0010,
+0x868,0x001f0010,
+0x86c,0x007f0010,
+0x870,0x0f100f70,
+0x874,0x0f100f70,
+0x878,0x00000000,
+0x87c,0x00000000,
+0x880,0x6870e36c,
+0x884,0xe3573600,
+0x888,0x4260c340,
+0x88c,0x0000ff00,
+0x890,0x00000000,
+0x894,0xfffffffe,
+0x898,0x4c42382f,
+0x89c,0x00656056,
+0x8b0,0x00000000,
+0x8e0,0x00000000,
+0x8e4,0x00000000,
+0x900,0x00000000,
+0x904,0x00000023,
+0x908,0x00000000,
+0x90c,0x31121311,
+0xa00,0x00d0c7d8,
+0xa04,0x811f0008,
+0xa08,0x80cd8300,
+0xa0c,0x2e62740f,
+0xa10,0x95009b78,
+0xa14,0x11145008,
+0xa18,0x00881117,
+0xa1c,0x89140fa0,
+0xa20,0x1a1b0000,
+0xa24,0x090e1317,
+0xa28,0x00000204,
+0xa2c,0x00000000,
+0xc00,0x00000040,
+0xc04,0x00005433,
+0xc08,0x000000e4,
+0xc0c,0x6c6c6c6c,
+0xc10,0x08800000,
+0xc14,0x40000100,
+0xc18,0x08000000,
+0xc1c,0x40000100,
+0xc20,0x08000000,
+0xc24,0x40000100,
+0xc28,0x08000000,
+0xc2c,0x40000100,
+0xc30,0x6de9ac44,
+0xc34,0x465c52cd,
+0xc38,0x497f5994,
+0xc3c,0x0a969764,
+0xc40,0x1f7c403f,
+0xc44,0x000100b7,
+0xc48,0xec020000,
+0xc4c,0x00000300,
+0xc50,0x69543420,
+0xc54,0x433c0094,
+0xc58,0x69543420,
+0xc5c,0x433c0094,
+0xc60,0x69543420,
+0xc64,0x433c0094,
+0xc68,0x69543420,
+0xc6c,0x433c0094,
+0xc70,0x2c7f000d,
+0xc74,0x0186175b,
+0xc78,0x0000001f,
+0xc7c,0x00b91612,
+0xc80,0x40000100,
+0xc84,0x20000000,
+0xc88,0x40000100,
+0xc8c,0x20200000,
+0xc90,0x40000100,
+0xc94,0x00000000,
+0xc98,0x40000100,
+0xc9c,0x00000000,
+0xca0,0x00492492,
+0xca4,0x00000000,
+0xca8,0x00000000,
+0xcac,0x00000000,
+0xcb0,0x00000000,
+0xcb4,0x00000000,
+0xcb8,0x00000000,
+0xcbc,0x00492492,
+0xcc0,0x00000000,
+0xcc4,0x00000000,
+0xcc8,0x00000000,
+0xccc,0x00000000,
+0xcd0,0x00000000,
+0xcd4,0x00000000,
+0xcd8,0x64b22427,
+0xcdc,0x00766932,
+0xce0,0x00222222,
+0xd00,0x00000750,
+0xd04,0x00000403,
+0xd08,0x0000907f,
+0xd0c,0x00000001,
+0xd10,0xa0633333,
+0xd14,0x33333c63,
+0xd18,0x6a8f5b6b,
+0xd1c,0x00000000,
+0xd20,0x00000000,
+0xd24,0x00000000,
+0xd28,0x00000000,
+0xd2c,0xcc979975,
+0xd30,0x00000000,
+0xd34,0x00000000,
+0xd38,0x00000000,
+0xd3c,0x00027293,
+0xd40,0x00000000,
+0xd44,0x00000000,
+0xd48,0x00000000,
+0xd4c,0x00000000,
+0xd50,0x6437140a,
+0xd54,0x024dbd02,
+0xd58,0x00000000,
+0xd5c,0x04032064,
+0xe00,0x161a1a1a,
+0xe04,0x12121416,
+0xe08,0x00001800,
+0xe0c,0x00000000,
+0xe10,0x161a1a1a,
+0xe14,0x12121416,
+0xe18,0x161a1a1a,
+0xe1c,0x12121416,
+};
+
+u32 Rtl8192UsbRadioA_Array[] = {
+0x019,0x00000003,
+0x000,0x000000bf,
+0x001,0x00000ee0,
+0x002,0x0000004c,
+0x003,0x000007f1,
+0x004,0x00000975,
+0x005,0x00000c58,
+0x006,0x00000ae6,
+0x007,0x000000ca,
+0x008,0x00000e1c,
+0x009,0x000007f0,
+0x00a,0x000009d0,
+0x00b,0x000001ba,
+0x00c,0x00000240,
+0x00e,0x00000020,
+0x00f,0x00000990,
+0x012,0x00000806,
+0x014,0x000005ab,
+0x015,0x00000f80,
+0x016,0x00000020,
+0x017,0x00000597,
+0x018,0x0000050a,
+0x01a,0x00000f80,
+0x01b,0x00000f5e,
+0x01c,0x00000008,
+0x01d,0x00000607,
+0x01e,0x000006cc,
+0x01f,0x00000000,
+0x020,0x000001a5,
+0x01f,0x00000001,
+0x020,0x00000165,
+0x01f,0x00000002,
+0x020,0x000000c6,
+0x01f,0x00000003,
+0x020,0x00000086,
+0x01f,0x00000004,
+0x020,0x00000046,
+0x01f,0x00000005,
+0x020,0x000001e6,
+0x01f,0x00000006,
+0x020,0x000001a6,
+0x01f,0x00000007,
+0x020,0x00000166,
+0x01f,0x00000008,
+0x020,0x000000c7,
+0x01f,0x00000009,
+0x020,0x00000087,
+0x01f,0x0000000a,
+0x020,0x000000f7,
+0x01f,0x0000000b,
+0x020,0x000000d7,
+0x01f,0x0000000c,
+0x020,0x000000b7,
+0x01f,0x0000000d,
+0x020,0x00000097,
+0x01f,0x0000000e,
+0x020,0x00000077,
+0x01f,0x0000000f,
+0x020,0x00000057,
+0x01f,0x00000010,
+0x020,0x00000037,
+0x01f,0x00000011,
+0x020,0x000000fb,
+0x01f,0x00000012,
+0x020,0x000000db,
+0x01f,0x00000013,
+0x020,0x000000bb,
+0x01f,0x00000014,
+0x020,0x000000ff,
+0x01f,0x00000015,
+0x020,0x000000e3,
+0x01f,0x00000016,
+0x020,0x000000c3,
+0x01f,0x00000017,
+0x020,0x000000a3,
+0x01f,0x00000018,
+0x020,0x00000083,
+0x01f,0x00000019,
+0x020,0x00000063,
+0x01f,0x0000001a,
+0x020,0x00000043,
+0x01f,0x0000001b,
+0x020,0x00000023,
+0x01f,0x0000001c,
+0x020,0x00000003,
+0x01f,0x0000001d,
+0x020,0x000001e3,
+0x01f,0x0000001e,
+0x020,0x000001c3,
+0x01f,0x0000001f,
+0x020,0x000001a3,
+0x01f,0x00000020,
+0x020,0x00000183,
+0x01f,0x00000021,
+0x020,0x00000163,
+0x01f,0x00000022,
+0x020,0x00000143,
+0x01f,0x00000023,
+0x020,0x00000123,
+0x01f,0x00000024,
+0x020,0x00000103,
+0x023,0x00000203,
+0x024,0x00000200,
+0x00b,0x000001ba,
+0x02c,0x000003d7,
+0x02d,0x00000ff0,
+0x000,0x00000037,
+0x004,0x00000160,
+0x007,0x00000080,
+0x002,0x0000088d,
+0x0fe,0x00000000,
+0x0fe,0x00000000,
+0x016,0x00000200,
+0x016,0x00000380,
+0x016,0x00000020,
+0x016,0x000001a0,
+0x000,0x000000bf,
+0x00d,0x0000001f,
+0x00d,0x00000c9f,
+0x002,0x0000004d,
+0x000,0x00000cbf,
+0x004,0x00000975,
+0x007,0x00000700,
+};
+
+u32 Rtl8192UsbRadioB_Array[] = {
+0x019,0x00000003,
+0x000,0x000000bf,
+0x001,0x000006e0,
+0x002,0x0000004c,
+0x003,0x000007f1,
+0x004,0x00000975,
+0x005,0x00000c58,
+0x006,0x00000ae6,
+0x007,0x000000ca,
+0x008,0x00000e1c,
+0x000,0x000000b7,
+0x00a,0x00000850,
+0x000,0x000000bf,
+0x00b,0x000001ba,
+0x00c,0x00000240,
+0x00e,0x00000020,
+0x015,0x00000f80,
+0x016,0x00000020,
+0x017,0x00000597,
+0x018,0x0000050a,
+0x01a,0x00000e00,
+0x01b,0x00000f5e,
+0x01d,0x00000607,
+0x01e,0x000006cc,
+0x00b,0x000001ba,
+0x023,0x00000203,
+0x024,0x00000200,
+0x000,0x00000037,
+0x004,0x00000160,
+0x016,0x00000200,
+0x016,0x00000380,
+0x016,0x00000020,
+0x016,0x000001a0,
+0x00d,0x00000ccc,
+0x000,0x000000bf,
+0x002,0x0000004d,
+0x000,0x00000cbf,
+0x004,0x00000975,
+0x007,0x00000700,
+};
+
+u32 Rtl8192UsbRadioC_Array[] = {
+0x0, };
+
+u32 Rtl8192UsbRadioD_Array[] = {
+0x0, };
+
+u32 Rtl8192UsbMACPHY_Array[] = {
+0x03c,0xffff0000,0x00000f0f,
+0x340,0xffffffff,0x161a1a1a,
+0x344,0xffffffff,0x12121416,
+0x348,0x0000ffff,0x00001818,
+0x12c,0xffffffff,0x04000802,
+0x318,0x00000fff,0x00000100,
+};
+
+u32 Rtl8192UsbMACPHY_Array_PG[] = {
+0x03c,0xffff0000,0x00000f0f,
+0xe00,0xffffffff,0x06090909,
+0xe04,0xffffffff,0x00030306,
+0xe08,0x0000ff00,0x00000000,
+0xe10,0xffffffff,0x0a0c0d0f,
+0xe14,0xffffffff,0x06070809,
+0xe18,0xffffffff,0x0a0c0d0f,
+0xe1c,0xffffffff,0x06070809,
+0x12c,0xffffffff,0x04000802,
+0x318,0x00000fff,0x00000800,
+};
+
+u32 Rtl8192UsbAGCTAB_Array[] = {
+0xc78,0x7d000001,
+0xc78,0x7d010001,
+0xc78,0x7d020001,
+0xc78,0x7d030001,
+0xc78,0x7d040001,
+0xc78,0x7d050001,
+0xc78,0x7c060001,
+0xc78,0x7b070001,
+0xc78,0x7a080001,
+0xc78,0x79090001,
+0xc78,0x780a0001,
+0xc78,0x770b0001,
+0xc78,0x760c0001,
+0xc78,0x750d0001,
+0xc78,0x740e0001,
+0xc78,0x730f0001,
+0xc78,0x72100001,
+0xc78,0x71110001,
+0xc78,0x70120001,
+0xc78,0x6f130001,
+0xc78,0x6e140001,
+0xc78,0x6d150001,
+0xc78,0x6c160001,
+0xc78,0x6b170001,
+0xc78,0x6a180001,
+0xc78,0x69190001,
+0xc78,0x681a0001,
+0xc78,0x671b0001,
+0xc78,0x661c0001,
+0xc78,0x651d0001,
+0xc78,0x641e0001,
+0xc78,0x491f0001,
+0xc78,0x48200001,
+0xc78,0x47210001,
+0xc78,0x46220001,
+0xc78,0x45230001,
+0xc78,0x44240001,
+0xc78,0x43250001,
+0xc78,0x28260001,
+0xc78,0x27270001,
+0xc78,0x26280001,
+0xc78,0x25290001,
+0xc78,0x242a0001,
+0xc78,0x232b0001,
+0xc78,0x222c0001,
+0xc78,0x212d0001,
+0xc78,0x202e0001,
+0xc78,0x0a2f0001,
+0xc78,0x08300001,
+0xc78,0x06310001,
+0xc78,0x05320001,
+0xc78,0x04330001,
+0xc78,0x03340001,
+0xc78,0x02350001,
+0xc78,0x01360001,
+0xc78,0x00370001,
+0xc78,0x00380001,
+0xc78,0x00390001,
+0xc78,0x003a0001,
+0xc78,0x003b0001,
+0xc78,0x003c0001,
+0xc78,0x003d0001,
+0xc78,0x003e0001,
+0xc78,0x003f0001,
+0xc78,0x7d400001,
+0xc78,0x7d410001,
+0xc78,0x7d420001,
+0xc78,0x7d430001,
+0xc78,0x7d440001,
+0xc78,0x7d450001,
+0xc78,0x7c460001,
+0xc78,0x7b470001,
+0xc78,0x7a480001,
+0xc78,0x79490001,
+0xc78,0x784a0001,
+0xc78,0x774b0001,
+0xc78,0x764c0001,
+0xc78,0x754d0001,
+0xc78,0x744e0001,
+0xc78,0x734f0001,
+0xc78,0x72500001,
+0xc78,0x71510001,
+0xc78,0x70520001,
+0xc78,0x6f530001,
+0xc78,0x6e540001,
+0xc78,0x6d550001,
+0xc78,0x6c560001,
+0xc78,0x6b570001,
+0xc78,0x6a580001,
+0xc78,0x69590001,
+0xc78,0x685a0001,
+0xc78,0x675b0001,
+0xc78,0x665c0001,
+0xc78,0x655d0001,
+0xc78,0x645e0001,
+0xc78,0x495f0001,
+0xc78,0x48600001,
+0xc78,0x47610001,
+0xc78,0x46620001,
+0xc78,0x45630001,
+0xc78,0x44640001,
+0xc78,0x43650001,
+0xc78,0x28660001,
+0xc78,0x27670001,
+0xc78,0x26680001,
+0xc78,0x25690001,
+0xc78,0x246a0001,
+0xc78,0x236b0001,
+0xc78,0x226c0001,
+0xc78,0x216d0001,
+0xc78,0x206e0001,
+0xc78,0x0a6f0001,
+0xc78,0x08700001,
+0xc78,0x06710001,
+0xc78,0x05720001,
+0xc78,0x04730001,
+0xc78,0x03740001,
+0xc78,0x02750001,
+0xc78,0x01760001,
+0xc78,0x00770001,
+0xc78,0x00780001,
+0xc78,0x00790001,
+0xc78,0x007a0001,
+0xc78,0x007b0001,
+0xc78,0x007c0001,
+0xc78,0x007d0001,
+0xc78,0x007e0001,
+0xc78,0x007f0001,
+0xc78,0x2e00001e,
+0xc78,0x2e01001e,
+0xc78,0x2e02001e,
+0xc78,0x2e03001e,
+0xc78,0x2e04001e,
+0xc78,0x2e05001e,
+0xc78,0x3006001e,
+0xc78,0x3407001e,
+0xc78,0x3908001e,
+0xc78,0x3c09001e,
+0xc78,0x3f0a001e,
+0xc78,0x420b001e,
+0xc78,0x440c001e,
+0xc78,0x450d001e,
+0xc78,0x460e001e,
+0xc78,0x460f001e,
+0xc78,0x4710001e,
+0xc78,0x4811001e,
+0xc78,0x4912001e,
+0xc78,0x4a13001e,
+0xc78,0x4b14001e,
+0xc78,0x4b15001e,
+0xc78,0x4c16001e,
+0xc78,0x4d17001e,
+0xc78,0x4e18001e,
+0xc78,0x4f19001e,
+0xc78,0x4f1a001e,
+0xc78,0x501b001e,
+0xc78,0x511c001e,
+0xc78,0x521d001e,
+0xc78,0x521e001e,
+0xc78,0x531f001e,
+0xc78,0x5320001e,
+0xc78,0x5421001e,
+0xc78,0x5522001e,
+0xc78,0x5523001e,
+0xc78,0x5624001e,
+0xc78,0x5725001e,
+0xc78,0x5726001e,
+0xc78,0x5827001e,
+0xc78,0x5828001e,
+0xc78,0x5929001e,
+0xc78,0x592a001e,
+0xc78,0x5a2b001e,
+0xc78,0x5b2c001e,
+0xc78,0x5c2d001e,
+0xc78,0x5c2e001e,
+0xc78,0x5d2f001e,
+0xc78,0x5e30001e,
+0xc78,0x5f31001e,
+0xc78,0x6032001e,
+0xc78,0x6033001e,
+0xc78,0x6134001e,
+0xc78,0x6235001e,
+0xc78,0x6336001e,
+0xc78,0x6437001e,
+0xc78,0x6438001e,
+0xc78,0x6539001e,
+0xc78,0x663a001e,
+0xc78,0x673b001e,
+0xc78,0x673c001e,
+0xc78,0x683d001e,
+0xc78,0x693e001e,
+0xc78,0x6a3f001e,
+};
diff --git a/drivers/staging/rtl8192su/r819xU_firmware_img.h b/drivers/staging/rtl8192su/r819xU_firmware_img.h
new file mode 100644
index 00000000000..d9d9515a1e6
--- /dev/null
+++ b/drivers/staging/rtl8192su/r819xU_firmware_img.h
@@ -0,0 +1,35 @@
+#ifndef IMG_H
+#define IMG_H
+
+#define BOOT_ARR_LEN 344
+#define MAIN_ARR_LEN 45136
+#define DATA_ARR_LEN 796
+#define MACPHY_Array_PGLength 30
+#define PHY_REG_1T2RArrayLength 296
+#define AGCTAB_ArrayLength 384
+#define MACPHY_ArrayLength 18
+
+#define RadioA_ArrayLength 246
+#define RadioB_ArrayLength 78
+#define RadioC_ArrayLength 1
+#define RadioD_ArrayLength 1
+#define PHY_REGArrayLength 1
+
+
+extern u8 rtl8190_fwboot_array[BOOT_ARR_LEN];
+extern u8 rtl8190_fwmain_array[MAIN_ARR_LEN];
+extern u8 rtl8190_fwdata_array[DATA_ARR_LEN];
+
+extern u32 Rtl8192UsbPHY_REGArray[];
+extern u32 Rtl8192UsbPHY_REG_1T2RArray[];
+extern u32 Rtl8192UsbRadioA_Array[];
+extern u32 Rtl8192UsbRadioB_Array[];
+extern u32 Rtl8192UsbRadioC_Array[];
+extern u32 Rtl8192UsbRadioD_Array[];
+extern u32 Rtl8192UsbMACPHY_Array[];
+extern u32 Rtl8192UsbMACPHY_Array_PG[];
+extern u32 Rtl8192UsbAGCTAB_Array[];
+
+
+
+#endif
diff --git a/drivers/staging/rtl8192su/r819xU_phy.c b/drivers/staging/rtl8192su/r819xU_phy.c
new file mode 100644
index 00000000000..00497d313f9
--- /dev/null
+++ b/drivers/staging/rtl8192su/r819xU_phy.c
@@ -0,0 +1,1826 @@
+#include "r8192U.h"
+#include "r8192U_hw.h"
+#include "r819xU_phy.h"
+#include "r819xU_phyreg.h"
+#include "r8190_rtl8256.h"
+#include "r8192U_dm.h"
+#include "r819xU_firmware_img.h"
+
+#ifdef ENABLE_DOT11D
+#include "dot11d.h"
+#endif
+static u32 RF_CHANNEL_TABLE_ZEBRA[] = {
+	0,
+	0x085c, //2412 1
+	0x08dc, //2417 2
+	0x095c, //2422 3
+	0x09dc, //2427 4
+	0x0a5c, //2432 5
+	0x0adc, //2437 6
+	0x0b5c, //2442 7
+	0x0bdc, //2447 8
+	0x0c5c, //2452 9
+	0x0cdc, //2457 10
+	0x0d5c, //2462 11
+	0x0ddc, //2467 12
+	0x0e5c, //2472 13
+	0x0f72, //2484
+};
+
+
+#define rtl819XPHY_REG_1T2RArray Rtl8192UsbPHY_REG_1T2RArray
+#define rtl819XMACPHY_Array_PG Rtl8192UsbMACPHY_Array_PG
+#define rtl819XMACPHY_Array Rtl8192UsbMACPHY_Array
+#define rtl819XRadioA_Array  Rtl8192UsbRadioA_Array
+#define rtl819XRadioB_Array Rtl8192UsbRadioB_Array
+#define rtl819XRadioC_Array Rtl8192UsbRadioC_Array
+#define rtl819XRadioD_Array Rtl8192UsbRadioD_Array
+#define rtl819XAGCTAB_Array Rtl8192UsbAGCTAB_Array
+
+/******************************************************************************
+ *function:  This function read BB parameters from Header file we gen,
+ *	     and do register read/write
+ *   input:  u32	dwBitMask  //taget bit pos in the addr to be modified
+ *  output:  none
+ *  return:  u32	return the shift bit bit position of the mask
+ * ****************************************************************************/
+u32 rtl8192_CalculateBitShift(u32 dwBitMask)
+{
+	u32 i;
+	for (i=0; i<=31; i++)
+	{
+		if (((dwBitMask>>i)&0x1) == 1)
+			break;
+	}
+	return i;
+}
+/******************************************************************************
+ *function:  This function check different RF type to execute legal judgement. If RF Path is illegal, we will return false.
+ *   input:  none
+ *  output:  none
+ *  return:  0(illegal, false), 1(legal,true)
+ * ***************************************************************************/
+u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device* dev, u32 eRFPath)
+{
+	u8 ret = 1;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	if (priv->rf_type == RF_2T4R)
+		ret = 0;
+	else if (priv->rf_type == RF_1T2R)
+	{
+		if (eRFPath == RF90_PATH_A || eRFPath == RF90_PATH_B)
+			ret = 1;
+		else if (eRFPath == RF90_PATH_C || eRFPath == RF90_PATH_D)
+			ret = 0;
+	}
+	return ret;
+}
+/******************************************************************************
+ *function:  This function set specific bits to BB register
+ *   input:  net_device dev
+ *           u32	dwRegAddr  //target addr to be modified
+ *           u32	dwBitMask  //taget bit pos in the addr to be modified
+ *           u32	dwData     //value to be write
+ *  output:  none
+ *  return:  none
+ *  notice:
+ * ****************************************************************************/
+void rtl8192_setBBreg(struct net_device* dev, u32 dwRegAddr, u32 dwBitMask, u32 dwData)
+{
+
+	u32 OriginalValue, BitShift, NewValue;
+
+	if(dwBitMask!= bMaskDWord)
+	{//if not "double word" write
+		OriginalValue = read_nic_dword(dev, dwRegAddr);
+		BitShift = rtl8192_CalculateBitShift(dwBitMask);
+            	NewValue = (((OriginalValue) & (~dwBitMask)) | (dwData << BitShift));
+		write_nic_dword(dev, dwRegAddr, NewValue);
+	}else
+		write_nic_dword(dev, dwRegAddr, dwData);
+	return;
+}
+/******************************************************************************
+ *function:  This function reads specific bits from BB register
+ *   input:  net_device dev
+ *           u32	dwRegAddr  //target addr to be readback
+ *           u32	dwBitMask  //taget bit pos in the addr to be readback
+ *  output:  none
+ *  return:  u32	Data	//the readback register value
+ *  notice:
+ * ****************************************************************************/
+u32 rtl8192_QueryBBReg(struct net_device* dev, u32 dwRegAddr, u32 dwBitMask)
+{
+	u32 Ret = 0, OriginalValue, BitShift;
+
+	OriginalValue = read_nic_dword(dev, dwRegAddr);
+	BitShift = rtl8192_CalculateBitShift(dwBitMask);
+	Ret =(OriginalValue & dwBitMask) >> BitShift;
+
+	return (Ret);
+}
+static  u32 phy_FwRFSerialRead( struct net_device* dev, RF90_RADIO_PATH_E       eRFPath, u32 Offset  );
+
+static void phy_FwRFSerialWrite( struct net_device* dev, RF90_RADIO_PATH_E       eRFPath, u32  Offset, u32  Data);
+
+/******************************************************************************
+ *function:  This function read register from RF chip
+ *   input:  net_device dev
+ *   	     RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D
+ *           u32	Offset     //target address to be read
+ *  output:  none
+ *  return:  u32 	readback value
+ *  notice:  There are three types of serial operations:(1) Software serial write.(2)Hardware LSSI-Low Speed Serial Interface.(3)Hardware HSSI-High speed serial write. Driver here need to implement (1) and (2)---need more spec for this information.
+ * ****************************************************************************/
+u32 rtl8192_phy_RFSerialRead(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u32 ret = 0;
+	u32 NewOffset = 0;
+	BB_REGISTER_DEFINITION_T* pPhyReg = &priv->PHYRegDef[eRFPath];
+	rtl8192_setBBreg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData, 0);
+	//make sure RF register offset is correct
+	Offset &= 0x3f;
+
+	//switch page for 8256 RF IC
+	if (priv->rf_chip == RF_8256)
+	{
+		if (Offset >= 31)
+		{
+			priv->RfReg0Value[eRFPath] |= 0x140;
+			//Switch to Reg_Mode2 for Reg 31-45
+			rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16) );
+			//modify offset
+			NewOffset = Offset -30;
+		}
+		else if (Offset >= 16)
+		{
+			priv->RfReg0Value[eRFPath] |= 0x100;
+			priv->RfReg0Value[eRFPath] &= (~0x40);
+			//Switch to Reg_Mode 1 for Reg16-30
+			rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16) );
+
+			NewOffset = Offset - 15;
+		}
+		else
+			NewOffset = Offset;
+	}
+	else
+	{
+		RT_TRACE((COMP_PHY|COMP_ERR), "check RF type here, need to be 8256\n");
+		NewOffset = Offset;
+	}
+	//put desired read addr to LSSI control Register
+	rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadAddress, NewOffset);
+	//Issue a posedge trigger
+	//
+	rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2,  bLSSIReadEdge, 0x0);
+	rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2,  bLSSIReadEdge, 0x1);
+
+
+	// TODO: we should not delay such a  long time. Ask help from SD3
+	msleep(1);
+
+	ret = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData);
+
+
+	// Switch back to Reg_Mode0;
+	if(priv->rf_chip == RF_8256)
+	{
+		priv->RfReg0Value[eRFPath] &= 0xebf;
+
+		rtl8192_setBBreg(
+			dev,
+			pPhyReg->rf3wireOffset,
+			bMaskDWord,
+			(priv->RfReg0Value[eRFPath] << 16));
+	}
+
+	return ret;
+
+}
+
+/******************************************************************************
+ *function:  This function write data to RF register
+ *   input:  net_device dev
+ *   	     RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D
+ *           u32	Offset     //target address to be written
+ *           u32	Data	//The new register data to be written
+ *  output:  none
+ *  return:  none
+ *  notice:  For RF8256 only.
+  ===========================================================
+ *Reg Mode	RegCTL[1]	RegCTL[0]		Note
+ *		(Reg00[12])	(Reg00[10])
+ *===========================================================
+ *Reg_Mode0	0		x			Reg 0 ~15(0x0 ~ 0xf)
+ *------------------------------------------------------------------
+ *Reg_Mode1	1		0			Reg 16 ~30(0x1 ~ 0xf)
+ *------------------------------------------------------------------
+ * Reg_Mode2	1		1			Reg 31 ~ 45(0x1 ~ 0xf)
+ *------------------------------------------------------------------
+ * ****************************************************************************/
+void rtl8192_phy_RFSerialWrite(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u32 DataAndAddr = 0, NewOffset = 0;
+	BB_REGISTER_DEFINITION_T	*pPhyReg = &priv->PHYRegDef[eRFPath];
+
+	Offset &= 0x3f;
+	//spin_lock_irqsave(&priv->rf_lock, flags);
+//	down(&priv->rf_sem);
+	if (priv->rf_chip == RF_8256)
+	{
+
+		if (Offset >= 31)
+		{
+			priv->RfReg0Value[eRFPath] |= 0x140;
+			rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath] << 16));
+			NewOffset = Offset - 30;
+		}
+		else if (Offset >= 16)
+		{
+			priv->RfReg0Value[eRFPath] |= 0x100;
+			priv->RfReg0Value[eRFPath] &= (~0x40);
+			rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16));
+			NewOffset = Offset - 15;
+		}
+		else
+			NewOffset = Offset;
+	}
+	else
+	{
+		RT_TRACE((COMP_PHY|COMP_ERR), "check RF type here, need to be 8256\n");
+		NewOffset = Offset;
+	}
+
+	// Put write addr in [5:0]  and write data in [31:16]
+	DataAndAddr = (Data<<16) | (NewOffset&0x3f);
+
+	// Write Operation
+	rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, DataAndAddr);
+
+
+	if(Offset==0x0)
+		priv->RfReg0Value[eRFPath] = Data;
+
+	// Switch back to Reg_Mode0;
+ 	if(priv->rf_chip == RF_8256)
+	{
+		if(Offset != 0)
+		{
+			priv->RfReg0Value[eRFPath] &= 0xebf;
+			rtl8192_setBBreg(
+				dev,
+				pPhyReg->rf3wireOffset,
+				bMaskDWord,
+				(priv->RfReg0Value[eRFPath] << 16));
+		}
+	}
+	//spin_unlock_irqrestore(&priv->rf_lock, flags);
+//	up(&priv->rf_sem);
+	return;
+}
+
+/******************************************************************************
+ *function:  This function set specific bits to RF register
+ *   input:  net_device dev
+ *   	     RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D
+ *           u32	RegAddr  //target addr to be modified
+ *           u32	BitMask  //taget bit pos in the addr to be modified
+ *           u32	Data     //value to be write
+ *  output:  none
+ *  return:  none
+ *  notice:
+ * ****************************************************************************/
+void rtl8192_phy_SetRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask, u32 Data)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u32 Original_Value, BitShift, New_Value;
+//	u8	time = 0;
+
+	if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
+		return;
+
+	if (priv->Rf_Mode == RF_OP_By_FW)
+	{
+		if (BitMask != bMask12Bits) // RF data is 12 bits only
+		{
+			Original_Value = phy_FwRFSerialRead(dev, eRFPath, RegAddr);
+			BitShift =  rtl8192_CalculateBitShift(BitMask);
+			New_Value = ((Original_Value) & (~BitMask)) | (Data<< BitShift);
+
+			phy_FwRFSerialWrite(dev, eRFPath, RegAddr, New_Value);
+		}else
+			phy_FwRFSerialWrite(dev, eRFPath, RegAddr, Data);
+
+		udelay(200);
+
+	}
+	else
+	{
+		if (BitMask != bMask12Bits) // RF data is 12 bits only
+   	        {
+			Original_Value = rtl8192_phy_RFSerialRead(dev, eRFPath, RegAddr);
+      			BitShift =  rtl8192_CalculateBitShift(BitMask);
+      			New_Value = (((Original_Value) & (~BitMask)) | (Data<< BitShift));
+
+			rtl8192_phy_RFSerialWrite(dev, eRFPath, RegAddr, New_Value);
+	        }else
+			rtl8192_phy_RFSerialWrite(dev, eRFPath, RegAddr, Data);
+	}
+	return;
+}
+
+/******************************************************************************
+ *function:  This function reads specific bits from RF register
+ *   input:  net_device dev
+ *           u32	RegAddr  //target addr to be readback
+ *           u32	BitMask  //taget bit pos in the addr to be readback
+ *  output:  none
+ *  return:  u32	Data	//the readback register value
+ *  notice:
+ * ****************************************************************************/
+u32 rtl8192_phy_QueryRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask)
+{
+	u32 Original_Value, Readback_Value, BitShift;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+
+	if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
+		return 0;
+	if (priv->Rf_Mode == RF_OP_By_FW)
+	{
+		Original_Value = phy_FwRFSerialRead(dev, eRFPath, RegAddr);
+		BitShift =  rtl8192_CalculateBitShift(BitMask);
+		Readback_Value = (Original_Value & BitMask) >> BitShift;
+		udelay(200);
+		return (Readback_Value);
+	}
+	else
+	{
+		Original_Value = rtl8192_phy_RFSerialRead(dev, eRFPath, RegAddr);
+   		BitShift =  rtl8192_CalculateBitShift(BitMask);
+   		Readback_Value = (Original_Value & BitMask) >> BitShift;
+		return (Readback_Value);
+	}
+}
+/******************************************************************************
+ *function:  We support firmware to execute RF-R/W.
+ *   input:  dev
+ *  output:  none
+ *  return:  none
+ *  notice:
+ * ***************************************************************************/
+static	u32
+phy_FwRFSerialRead(
+	struct net_device* dev,
+	RF90_RADIO_PATH_E	eRFPath,
+	u32				Offset	)
+{
+	u32		retValue = 0;
+	u32		Data = 0;
+	u8		time = 0;
+	//DbgPrint("FW RF CTRL\n\r");
+	/* 2007/11/02 MH Firmware RF Write control. By Francis' suggestion, we can
+	   not execute the scheme in the initial step. Otherwise, RF-R/W will waste
+	   much time. This is only for site survey. */
+	// 1. Read operation need not insert data. bit 0-11
+	//Data &= bMask12Bits;
+	// 2. Write RF register address. Bit 12-19
+	Data |= ((Offset&0xFF)<<12);
+	// 3. Write RF path.  bit 20-21
+	Data |= ((eRFPath&0x3)<<20);
+	// 4. Set RF read indicator. bit 22=0
+	//Data |= 0x00000;
+	// 5. Trigger Fw to operate the command. bit 31
+	Data |= 0x80000000;
+	// 6. We can not execute read operation if bit 31 is 1.
+	while (read_nic_dword(dev, QPNR)&0x80000000)
+	{
+		// If FW can not finish RF-R/W for more than ?? times. We must reset FW.
+		if (time++ < 100)
+		{
+			//DbgPrint("FW not finish RF-R Time=%d\n\r", time);
+			udelay(10);
+		}
+		else
+			break;
+	}
+	// 7. Execute read operation.
+	write_nic_dword(dev, QPNR, Data);
+	// 8. Check if firmawre send back RF content.
+	while (read_nic_dword(dev, QPNR)&0x80000000)
+	{
+		// If FW can not finish RF-R/W for more than ?? times. We must reset FW.
+		if (time++ < 100)
+		{
+			//DbgPrint("FW not finish RF-W Time=%d\n\r", time);
+			udelay(10);
+		}
+		else
+			return	(0);
+	}
+	retValue = read_nic_dword(dev, RF_DATA);
+
+	return	(retValue);
+
+}	/* phy_FwRFSerialRead */
+
+/******************************************************************************
+ *function:  We support firmware to execute RF-R/W.
+ *   input:  dev
+ *  output:  none
+ *  return:  none
+ *  notice:
+ * ***************************************************************************/
+static void
+phy_FwRFSerialWrite(
+		struct net_device* dev,
+		RF90_RADIO_PATH_E	eRFPath,
+		u32				Offset,
+		u32				Data	)
+{
+	u8	time = 0;
+
+	//DbgPrint("N FW RF CTRL RF-%d OF%02x DATA=%03x\n\r", eRFPath, Offset, Data);
+	/* 2007/11/02 MH Firmware RF Write control. By Francis' suggestion, we can
+	   not execute the scheme in the initial step. Otherwise, RF-R/W will waste
+	   much time. This is only for site survey. */
+
+	// 1. Set driver write bit and 12 bit data. bit 0-11
+	//Data &= bMask12Bits;	// Done by uper layer.
+	// 2. Write RF register address. bit 12-19
+	Data |= ((Offset&0xFF)<<12);
+	// 3. Write RF path.  bit 20-21
+	Data |= ((eRFPath&0x3)<<20);
+	// 4. Set RF write indicator. bit 22=1
+	Data |= 0x400000;
+	// 5. Trigger Fw to operate the command. bit 31=1
+	Data |= 0x80000000;
+
+	// 6. Write operation. We can not write if bit 31 is 1.
+	while (read_nic_dword(dev, QPNR)&0x80000000)
+	{
+		// If FW can not finish RF-R/W for more than ?? times. We must reset FW.
+		if (time++ < 100)
+		{
+			//DbgPrint("FW not finish RF-W Time=%d\n\r", time);
+			udelay(10);
+		}
+		else
+			break;
+	}
+	// 7. No matter check bit. We always force the write. Because FW will
+	//    not accept the command.
+	write_nic_dword(dev, QPNR, Data);
+	/* 2007/11/02 MH Acoording to test, we must delay 20us to wait firmware
+	   to finish RF write operation. */
+	/* 2008/01/17 MH We support delay in firmware side now. */
+	//delay_us(20);
+
+}	/* phy_FwRFSerialWrite */
+
+
+/******************************************************************************
+ *function:  This function read BB parameters from Header file we gen,
+ *	     and do register read/write
+ *   input:  dev
+ *  output:  none
+ *  return:  none
+ *  notice:  BB parameters may change all the time, so please make
+ *           sure it has been synced with the newest.
+ * ***************************************************************************/
+void rtl8192_phy_configmac(struct net_device* dev)
+{
+	u32 dwArrayLen = 0, i;
+	u32* pdwArray = NULL;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	if(priv->btxpowerdata_readfromEEPORM)
+	{
+		RT_TRACE(COMP_PHY, "Rtl819XMACPHY_Array_PG\n");
+		dwArrayLen = MACPHY_Array_PGLength;
+		pdwArray = rtl819XMACPHY_Array_PG;
+
+	}
+	else
+	{
+		RT_TRACE(COMP_PHY, "Rtl819XMACPHY_Array\n");
+		dwArrayLen = MACPHY_ArrayLength;
+		pdwArray = rtl819XMACPHY_Array;
+	}
+	for(i = 0; i<dwArrayLen; i=i+3){
+		if(pdwArray[i] == 0x318)
+		{
+			pdwArray[i+2] = 0x00000800;
+			//DbgPrint("ptrArray[i], ptrArray[i+1], ptrArray[i+2] = %x, %x, %x\n",
+			//	ptrArray[i], ptrArray[i+1], ptrArray[i+2]);
+		}
+
+		RT_TRACE(COMP_DBG, "The Rtl8190MACPHY_Array[0] is %x Rtl8190MACPHY_Array[1] is %x Rtl8190MACPHY_Array[2] is %x\n",
+				pdwArray[i], pdwArray[i+1], pdwArray[i+2]);
+		rtl8192_setBBreg(dev, pdwArray[i], pdwArray[i+1], pdwArray[i+2]);
+	}
+	return;
+
+}
+
+/******************************************************************************
+ *function:  This function do dirty work
+ *   input:  dev
+ *  output:  none
+ *  return:  none
+ *  notice:  BB parameters may change all the time, so please make
+ *           sure it has been synced with the newest.
+ * ***************************************************************************/
+
+void rtl8192_phyConfigBB(struct net_device* dev, u8 ConfigType)
+{
+	u32 i;
+
+#ifdef TO_DO_LIST
+	u32 *rtl8192PhyRegArrayTable = NULL, *rtl8192AgcTabArrayTable = NULL;
+	if(Adapter->bInHctTest)
+	{
+		PHY_REGArrayLen = PHY_REGArrayLengthDTM;
+		AGCTAB_ArrayLen = AGCTAB_ArrayLengthDTM;
+		Rtl8190PHY_REGArray_Table = Rtl819XPHY_REGArrayDTM;
+		Rtl8190AGCTAB_Array_Table = Rtl819XAGCTAB_ArrayDTM;
+	}
+#endif
+	if (ConfigType == BaseBand_Config_PHY_REG)
+	{
+		for (i=0; i<PHY_REG_1T2RArrayLength; i+=2)
+		{
+			rtl8192_setBBreg(dev, rtl819XPHY_REG_1T2RArray[i], bMaskDWord, rtl819XPHY_REG_1T2RArray[i+1]);
+			RT_TRACE(COMP_DBG, "i: %x, The Rtl819xUsbPHY_REGArray[0] is %x Rtl819xUsbPHY_REGArray[1] is %x \n",i, rtl819XPHY_REG_1T2RArray[i], rtl819XPHY_REG_1T2RArray[i+1]);
+		}
+	}
+	else if (ConfigType == BaseBand_Config_AGC_TAB)
+	{
+		for (i=0; i<AGCTAB_ArrayLength; i+=2)
+		{
+			rtl8192_setBBreg(dev, rtl819XAGCTAB_Array[i], bMaskDWord, rtl819XAGCTAB_Array[i+1]);
+			RT_TRACE(COMP_DBG, "i:%x, The rtl819XAGCTAB_Array[0] is %x rtl819XAGCTAB_Array[1] is %x \n",i, rtl819XAGCTAB_Array[i], rtl819XAGCTAB_Array[i+1]);
+		}
+	}
+	return;
+
+
+}
+/******************************************************************************
+ *function:  This function initialize Register definition offset for Radio Path
+ *	     A/B/C/D
+ *   input:  net_device dev
+ *  output:  none
+ *  return:  none
+ *  notice:  Initialization value here is constant and it should never be changed
+ * ***************************************************************************/
+void rtl8192_InitBBRFRegDef(struct net_device* dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+// RF Interface Sowrtware Control
+	priv->PHYRegDef[RF90_PATH_A].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 LSBs if read 32-bit from 0x870
+	priv->PHYRegDef[RF90_PATH_B].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 MSBs if read 32-bit from 0x870 (16-bit for 0x872)
+	priv->PHYRegDef[RF90_PATH_C].rfintfs = rFPGA0_XCD_RFInterfaceSW;// 16 LSBs if read 32-bit from 0x874
+	priv->PHYRegDef[RF90_PATH_D].rfintfs = rFPGA0_XCD_RFInterfaceSW;// 16 MSBs if read 32-bit from 0x874 (16-bit for 0x876)
+
+	// RF Interface Readback Value
+	priv->PHYRegDef[RF90_PATH_A].rfintfi = rFPGA0_XAB_RFInterfaceRB; // 16 LSBs if read 32-bit from 0x8E0
+	priv->PHYRegDef[RF90_PATH_B].rfintfi = rFPGA0_XAB_RFInterfaceRB;// 16 MSBs if read 32-bit from 0x8E0 (16-bit for 0x8E2)
+	priv->PHYRegDef[RF90_PATH_C].rfintfi = rFPGA0_XCD_RFInterfaceRB;// 16 LSBs if read 32-bit from 0x8E4
+	priv->PHYRegDef[RF90_PATH_D].rfintfi = rFPGA0_XCD_RFInterfaceRB;// 16 MSBs if read 32-bit from 0x8E4 (16-bit for 0x8E6)
+
+	// RF Interface Output (and Enable)
+	priv->PHYRegDef[RF90_PATH_A].rfintfo = rFPGA0_XA_RFInterfaceOE; // 16 LSBs if read 32-bit from 0x860
+	priv->PHYRegDef[RF90_PATH_B].rfintfo = rFPGA0_XB_RFInterfaceOE; // 16 LSBs if read 32-bit from 0x864
+	priv->PHYRegDef[RF90_PATH_C].rfintfo = rFPGA0_XC_RFInterfaceOE;// 16 LSBs if read 32-bit from 0x868
+	priv->PHYRegDef[RF90_PATH_D].rfintfo = rFPGA0_XD_RFInterfaceOE;// 16 LSBs if read 32-bit from 0x86C
+
+	// RF Interface (Output and)  Enable
+	priv->PHYRegDef[RF90_PATH_A].rfintfe = rFPGA0_XA_RFInterfaceOE; // 16 MSBs if read 32-bit from 0x860 (16-bit for 0x862)
+	priv->PHYRegDef[RF90_PATH_B].rfintfe = rFPGA0_XB_RFInterfaceOE; // 16 MSBs if read 32-bit from 0x864 (16-bit for 0x866)
+	priv->PHYRegDef[RF90_PATH_C].rfintfe = rFPGA0_XC_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86A (16-bit for 0x86A)
+	priv->PHYRegDef[RF90_PATH_D].rfintfe = rFPGA0_XD_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86C (16-bit for 0x86E)
+
+	//Addr of LSSI. Wirte RF register by driver
+	priv->PHYRegDef[RF90_PATH_A].rf3wireOffset = rFPGA0_XA_LSSIParameter; //LSSI Parameter
+	priv->PHYRegDef[RF90_PATH_B].rf3wireOffset = rFPGA0_XB_LSSIParameter;
+	priv->PHYRegDef[RF90_PATH_C].rf3wireOffset = rFPGA0_XC_LSSIParameter;
+	priv->PHYRegDef[RF90_PATH_D].rf3wireOffset = rFPGA0_XD_LSSIParameter;
+
+	// RF parameter
+	priv->PHYRegDef[RF90_PATH_A].rfLSSI_Select = rFPGA0_XAB_RFParameter;  //BB Band Select
+	priv->PHYRegDef[RF90_PATH_B].rfLSSI_Select = rFPGA0_XAB_RFParameter;
+	priv->PHYRegDef[RF90_PATH_C].rfLSSI_Select = rFPGA0_XCD_RFParameter;
+	priv->PHYRegDef[RF90_PATH_D].rfLSSI_Select = rFPGA0_XCD_RFParameter;
+
+	// Tx AGC Gain Stage (same for all path. Should we remove this?)
+	priv->PHYRegDef[RF90_PATH_A].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage
+	priv->PHYRegDef[RF90_PATH_B].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage
+	priv->PHYRegDef[RF90_PATH_C].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage
+	priv->PHYRegDef[RF90_PATH_D].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage
+
+	// Tranceiver A~D HSSI Parameter-1
+	priv->PHYRegDef[RF90_PATH_A].rfHSSIPara1 = rFPGA0_XA_HSSIParameter1;  //wire control parameter1
+	priv->PHYRegDef[RF90_PATH_B].rfHSSIPara1 = rFPGA0_XB_HSSIParameter1;  //wire control parameter1
+	priv->PHYRegDef[RF90_PATH_C].rfHSSIPara1 = rFPGA0_XC_HSSIParameter1;  //wire control parameter1
+	priv->PHYRegDef[RF90_PATH_D].rfHSSIPara1 = rFPGA0_XD_HSSIParameter1;  //wire control parameter1
+
+	// Tranceiver A~D HSSI Parameter-2
+	priv->PHYRegDef[RF90_PATH_A].rfHSSIPara2 = rFPGA0_XA_HSSIParameter2;  //wire control parameter2
+	priv->PHYRegDef[RF90_PATH_B].rfHSSIPara2 = rFPGA0_XB_HSSIParameter2;  //wire control parameter2
+	priv->PHYRegDef[RF90_PATH_C].rfHSSIPara2 = rFPGA0_XC_HSSIParameter2;  //wire control parameter2
+	priv->PHYRegDef[RF90_PATH_D].rfHSSIPara2 = rFPGA0_XD_HSSIParameter2;  //wire control parameter1
+
+	// RF switch Control
+	priv->PHYRegDef[RF90_PATH_A].rfSwitchControl = rFPGA0_XAB_SwitchControl; //TR/Ant switch control
+	priv->PHYRegDef[RF90_PATH_B].rfSwitchControl = rFPGA0_XAB_SwitchControl;
+	priv->PHYRegDef[RF90_PATH_C].rfSwitchControl = rFPGA0_XCD_SwitchControl;
+	priv->PHYRegDef[RF90_PATH_D].rfSwitchControl = rFPGA0_XCD_SwitchControl;
+
+	// AGC control 1
+	priv->PHYRegDef[RF90_PATH_A].rfAGCControl1 = rOFDM0_XAAGCCore1;
+	priv->PHYRegDef[RF90_PATH_B].rfAGCControl1 = rOFDM0_XBAGCCore1;
+	priv->PHYRegDef[RF90_PATH_C].rfAGCControl1 = rOFDM0_XCAGCCore1;
+	priv->PHYRegDef[RF90_PATH_D].rfAGCControl1 = rOFDM0_XDAGCCore1;
+
+	// AGC control 2
+	priv->PHYRegDef[RF90_PATH_A].rfAGCControl2 = rOFDM0_XAAGCCore2;
+	priv->PHYRegDef[RF90_PATH_B].rfAGCControl2 = rOFDM0_XBAGCCore2;
+	priv->PHYRegDef[RF90_PATH_C].rfAGCControl2 = rOFDM0_XCAGCCore2;
+	priv->PHYRegDef[RF90_PATH_D].rfAGCControl2 = rOFDM0_XDAGCCore2;
+
+	// RX AFE control 1
+	priv->PHYRegDef[RF90_PATH_A].rfRxIQImbalance = rOFDM0_XARxIQImbalance;
+	priv->PHYRegDef[RF90_PATH_B].rfRxIQImbalance = rOFDM0_XBRxIQImbalance;
+	priv->PHYRegDef[RF90_PATH_C].rfRxIQImbalance = rOFDM0_XCRxIQImbalance;
+	priv->PHYRegDef[RF90_PATH_D].rfRxIQImbalance = rOFDM0_XDRxIQImbalance;
+
+	// RX AFE control 1
+	priv->PHYRegDef[RF90_PATH_A].rfRxAFE = rOFDM0_XARxAFE;
+	priv->PHYRegDef[RF90_PATH_B].rfRxAFE = rOFDM0_XBRxAFE;
+	priv->PHYRegDef[RF90_PATH_C].rfRxAFE = rOFDM0_XCRxAFE;
+	priv->PHYRegDef[RF90_PATH_D].rfRxAFE = rOFDM0_XDRxAFE;
+
+	// Tx AFE control 1
+	priv->PHYRegDef[RF90_PATH_A].rfTxIQImbalance = rOFDM0_XATxIQImbalance;
+	priv->PHYRegDef[RF90_PATH_B].rfTxIQImbalance = rOFDM0_XBTxIQImbalance;
+	priv->PHYRegDef[RF90_PATH_C].rfTxIQImbalance = rOFDM0_XCTxIQImbalance;
+	priv->PHYRegDef[RF90_PATH_D].rfTxIQImbalance = rOFDM0_XDTxIQImbalance;
+
+	// Tx AFE control 2
+	priv->PHYRegDef[RF90_PATH_A].rfTxAFE = rOFDM0_XATxAFE;
+	priv->PHYRegDef[RF90_PATH_B].rfTxAFE = rOFDM0_XBTxAFE;
+	priv->PHYRegDef[RF90_PATH_C].rfTxAFE = rOFDM0_XCTxAFE;
+	priv->PHYRegDef[RF90_PATH_D].rfTxAFE = rOFDM0_XDTxAFE;
+
+	// Tranceiver LSSI Readback
+	priv->PHYRegDef[RF90_PATH_A].rfLSSIReadBack = rFPGA0_XA_LSSIReadBack;
+	priv->PHYRegDef[RF90_PATH_B].rfLSSIReadBack = rFPGA0_XB_LSSIReadBack;
+	priv->PHYRegDef[RF90_PATH_C].rfLSSIReadBack = rFPGA0_XC_LSSIReadBack;
+	priv->PHYRegDef[RF90_PATH_D].rfLSSIReadBack = rFPGA0_XD_LSSIReadBack;
+
+}
+/******************************************************************************
+ *function:  This function is to write register and then readback to make sure whether BB and RF is OK
+ *   input:  net_device dev
+ *   	     HW90_BLOCK_E CheckBlock
+ *   	     RF90_RADIO_PATH_E eRFPath  //only used when checkblock is HW90_BLOCK_RF
+ *  output:  none
+ *  return:  return whether BB and RF is ok(0:OK; 1:Fail)
+ *  notice:  This function may be removed in the ASIC
+ * ***************************************************************************/
+u8 rtl8192_phy_checkBBAndRF(struct net_device* dev, HW90_BLOCK_E CheckBlock, RF90_RADIO_PATH_E eRFPath)
+{
+//	struct r8192_priv *priv = ieee80211_priv(dev);
+//	BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[eRFPath];
+	u8 ret = 0;
+	u32 i, CheckTimes = 4, dwRegRead = 0;
+	u32 WriteAddr[4];
+	u32 WriteData[] = {0xfffff027, 0xaa55a02f, 0x00000027, 0x55aa502f};
+	// Initialize register address offset to be checked
+	WriteAddr[HW90_BLOCK_MAC] = 0x100;
+	WriteAddr[HW90_BLOCK_PHY0] = 0x900;
+	WriteAddr[HW90_BLOCK_PHY1] = 0x800;
+	WriteAddr[HW90_BLOCK_RF] = 0x3;
+	RT_TRACE(COMP_PHY, "=======>%s(), CheckBlock:%d\n", __FUNCTION__, CheckBlock);
+	for(i=0 ; i < CheckTimes ; i++)
+	{
+
+		//
+		// Write Data to register and readback
+		//
+		switch(CheckBlock)
+		{
+		case HW90_BLOCK_MAC:
+			RT_TRACE(COMP_ERR, "PHY_CheckBBRFOK(): Never Write 0x100 here!");
+			break;
+
+		case HW90_BLOCK_PHY0:
+		case HW90_BLOCK_PHY1:
+			write_nic_dword(dev, WriteAddr[CheckBlock], WriteData[i]);
+			dwRegRead = read_nic_dword(dev, WriteAddr[CheckBlock]);
+			break;
+
+		case HW90_BLOCK_RF:
+			WriteData[i] &= 0xfff;
+			rtl8192_phy_SetRFReg(dev, eRFPath, WriteAddr[HW90_BLOCK_RF], bMask12Bits, WriteData[i]);
+			// TODO: we should not delay for such a long time. Ask SD3
+			msleep(1);
+			dwRegRead = rtl8192_phy_QueryRFReg(dev, eRFPath, WriteAddr[HW90_BLOCK_RF], bMask12Bits);
+			msleep(1);
+			break;
+
+		default:
+			ret = 1;
+			break;
+		}
+
+
+		//
+		// Check whether readback data is correct
+		//
+		if(dwRegRead != WriteData[i])
+		{
+			RT_TRACE((COMP_PHY|COMP_ERR), "====>error=====dwRegRead: %x, WriteData: %x \n", dwRegRead, WriteData[i]);
+			ret = 1;
+			break;
+		}
+	}
+
+	return ret;
+}
+
+
+/******************************************************************************
+ *function:  This function initialize BB&RF
+ *   input:  net_device dev
+ *  output:  none
+ *  return:  none
+ *  notice:  Initialization value may change all the time, so please make
+ *           sure it has been synced with the newest.
+ * ***************************************************************************/
+void rtl8192_BB_Config_ParaFile(struct net_device* dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u8 bRegValue = 0, eCheckItem = 0, rtStatus = 0;
+	u32 dwRegValue = 0;
+	/**************************************
+	//<1>Initialize BaseBand
+	**************************************/
+
+	/*--set BB Global Reset--*/
+	bRegValue = read_nic_byte(dev, BB_GLOBAL_RESET);
+	write_nic_byte(dev, BB_GLOBAL_RESET,(bRegValue|BB_GLOBAL_RESET_BIT));
+	mdelay(50);
+	/*---set BB reset Active---*/
+	dwRegValue = read_nic_dword(dev, CPU_GEN);
+	write_nic_dword(dev, CPU_GEN, (dwRegValue&(~CPU_GEN_BB_RST)));
+
+	/*----Ckeck FPGAPHY0 and PHY1 board is OK----*/
+	// TODO: this function should be removed on ASIC , Emily 2007.2.2
+	for(eCheckItem=(HW90_BLOCK_E)HW90_BLOCK_PHY0; eCheckItem<=HW90_BLOCK_PHY1; eCheckItem++)
+	{
+		rtStatus  = rtl8192_phy_checkBBAndRF(dev, (HW90_BLOCK_E)eCheckItem, (RF90_RADIO_PATH_E)0); //don't care RF path
+		if(rtStatus != 0)
+		{
+			RT_TRACE((COMP_ERR | COMP_PHY), "PHY_RF8256_Config():Check PHY%d Fail!!\n", eCheckItem-1);
+			return ;
+		}
+	}
+	/*---- Set CCK and OFDM Block "OFF"----*/
+	rtl8192_setBBreg(dev, rFPGA0_RFMOD, bCCKEn|bOFDMEn, 0x0);
+	/*----BB Register Initilazation----*/
+	//==m==>Set PHY REG From Header<==m==
+	rtl8192_phyConfigBB(dev, BaseBand_Config_PHY_REG);
+
+	/*----Set BB reset de-Active----*/
+	dwRegValue = read_nic_dword(dev, CPU_GEN);
+	write_nic_dword(dev, CPU_GEN, (dwRegValue|CPU_GEN_BB_RST));
+
+ 	/*----BB AGC table Initialization----*/
+	//==m==>Set PHY REG From Header<==m==
+	rtl8192_phyConfigBB(dev, BaseBand_Config_AGC_TAB);
+
+	/*----Enable XSTAL ----*/
+	write_nic_byte_E(dev, 0x5e, 0x00);
+	if (priv->card_8192_version == (u8)VERSION_819xU_A)
+	{
+		//Antenna gain offset from B/C/D to A
+		dwRegValue = (priv->AntennaTxPwDiff[1]<<4 | priv->AntennaTxPwDiff[0]);
+		rtl8192_setBBreg(dev, rFPGA0_TxGainStage, (bXBTxAGC|bXCTxAGC), dwRegValue);
+
+		//XSTALLCap
+		dwRegValue = priv->CrystalCap & 0xf;
+		rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, bXtalCap, dwRegValue);
+	}
+
+	// Check if the CCK HighPower is turned ON.
+	// This is used to calculate PWDB.
+	priv->bCckHighPower = (u8)(rtl8192_QueryBBReg(dev, rFPGA0_XA_HSSIParameter2, 0x200));
+	return;
+}
+/******************************************************************************
+ *function:  This function initialize BB&RF
+ *   input:  net_device dev
+ *  output:  none
+ *  return:  none
+ *  notice:  Initialization value may change all the time, so please make
+ *           sure it has been synced with the newest.
+ * ***************************************************************************/
+void rtl8192_BBConfig(struct net_device* dev)
+{
+	rtl8192_InitBBRFRegDef(dev);
+	//config BB&RF. As hardCode based initialization has not been well
+	//implemented, so use file first.FIXME:should implement it for hardcode?
+	rtl8192_BB_Config_ParaFile(dev);
+	return;
+}
+
+/******************************************************************************
+ *function:  This function obtains the initialization value of Tx power Level offset
+ *   input:  net_device dev
+ *  output:  none
+ *  return:  none
+ * ***************************************************************************/
+void rtl8192_phy_getTxPower(struct net_device* dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	priv->MCSTxPowerLevelOriginalOffset[0] =
+		read_nic_dword(dev, rTxAGC_Rate18_06);
+	priv->MCSTxPowerLevelOriginalOffset[1] =
+		read_nic_dword(dev, rTxAGC_Rate54_24);
+	priv->MCSTxPowerLevelOriginalOffset[2] =
+		read_nic_dword(dev, rTxAGC_Mcs03_Mcs00);
+	priv->MCSTxPowerLevelOriginalOffset[3] =
+		read_nic_dword(dev, rTxAGC_Mcs07_Mcs04);
+	priv->MCSTxPowerLevelOriginalOffset[4] =
+		read_nic_dword(dev, rTxAGC_Mcs11_Mcs08);
+	priv->MCSTxPowerLevelOriginalOffset[5] =
+		read_nic_dword(dev, rTxAGC_Mcs15_Mcs12);
+
+	// read rx initial gain
+	priv->DefaultInitialGain[0] = read_nic_byte(dev, rOFDM0_XAAGCCore1);
+	priv->DefaultInitialGain[1] = read_nic_byte(dev, rOFDM0_XBAGCCore1);
+	priv->DefaultInitialGain[2] = read_nic_byte(dev, rOFDM0_XCAGCCore1);
+	priv->DefaultInitialGain[3] = read_nic_byte(dev, rOFDM0_XDAGCCore1);
+	RT_TRACE(COMP_INIT, "Default initial gain (c50=0x%x, c58=0x%x, c60=0x%x, c68=0x%x) \n",
+		priv->DefaultInitialGain[0], priv->DefaultInitialGain[1],
+		priv->DefaultInitialGain[2], priv->DefaultInitialGain[3]);
+
+	// read framesync
+	priv->framesync = read_nic_byte(dev, rOFDM0_RxDetector3);
+	priv->framesyncC34 = read_nic_byte(dev, rOFDM0_RxDetector2);
+	RT_TRACE(COMP_INIT, "Default framesync (0x%x) = 0x%x \n",
+		rOFDM0_RxDetector3, priv->framesync);
+
+	// read SIFS (save the value read fome MACPHY_REG.txt)
+	priv->SifsTime = read_nic_word(dev, SIFS);
+
+	return;
+}
+
+/******************************************************************************
+ *function:  This function obtains the initialization value of Tx power Level offset
+ *   input:  net_device dev
+ *  output:  none
+ *  return:  none
+ * ***************************************************************************/
+void rtl8192_phy_setTxPower(struct net_device* dev, u8 channel)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u8	powerlevel = priv->TxPowerLevelCCK[channel-1];
+	u8	powerlevelOFDM24G = priv->TxPowerLevelOFDM24G[channel-1];
+
+	switch(priv->rf_chip)
+	{
+	case RF_8256:
+		PHY_SetRF8256CCKTxPower(dev, powerlevel); //need further implement
+		PHY_SetRF8256OFDMTxPower(dev, powerlevelOFDM24G);
+		break;
+	default:
+//	case RF_8225:
+//	case RF_8258:
+		RT_TRACE((COMP_PHY|COMP_ERR), "error RF chipID(8225 or 8258) in function %s()\n", __FUNCTION__);
+		break;
+	}
+	return;
+}
+
+/******************************************************************************
+ *function:  This function check Rf chip to do RF config
+ *   input:  net_device dev
+ *  output:  none
+ *  return:  only 8256 is supported
+ * ***************************************************************************/
+void rtl8192_phy_RFConfig(struct net_device* dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	switch(priv->rf_chip)
+	{
+		case RF_8256:
+			PHY_RF8256_Config(dev);
+			break;
+	//	case RF_8225:
+	//	case RF_8258:
+		default:
+			RT_TRACE(COMP_ERR, "error chip id\n");
+			break;
+	}
+	return;
+}
+
+/******************************************************************************
+ *function:  This function update Initial gain
+ *   input:  net_device dev
+ *  output:  none
+ *  return:  As Windows has not implemented this, wait for complement
+ * ***************************************************************************/
+void rtl8192_phy_updateInitGain(struct net_device* dev)
+{
+	return;
+}
+
+/******************************************************************************
+ *function:  This function read RF parameters from general head file, and do RF 3-wire
+ *   input:  net_device dev
+ *  output:  none
+ *  return:  return code show if RF configuration is successful(0:pass, 1:fail)
+ *    Note:  Delay may be required for RF configuration
+ * ***************************************************************************/
+u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E	eRFPath)
+{
+
+	int i;
+	//u32* pRFArray;
+	u8 ret = 0;
+
+	switch(eRFPath){
+		case RF90_PATH_A:
+			for(i = 0;i<RadioA_ArrayLength; i=i+2){
+
+				if(rtl819XRadioA_Array[i] == 0xfe){
+						mdelay(100);
+						continue;
+				}
+				rtl8192_phy_SetRFReg(dev, eRFPath, rtl819XRadioA_Array[i], bMask12Bits, rtl819XRadioA_Array[i+1]);
+				mdelay(1);
+
+			}
+			break;
+		case RF90_PATH_B:
+			for(i = 0;i<RadioB_ArrayLength; i=i+2){
+
+				if(rtl819XRadioB_Array[i] == 0xfe){
+						mdelay(100);
+						continue;
+				}
+				rtl8192_phy_SetRFReg(dev, eRFPath, rtl819XRadioB_Array[i], bMask12Bits, rtl819XRadioB_Array[i+1]);
+				mdelay(1);
+
+			}
+			break;
+		case RF90_PATH_C:
+			for(i = 0;i<RadioC_ArrayLength; i=i+2){
+
+				if(rtl819XRadioC_Array[i] == 0xfe){
+						mdelay(100);
+						continue;
+				}
+				rtl8192_phy_SetRFReg(dev, eRFPath, rtl819XRadioC_Array[i], bMask12Bits, rtl819XRadioC_Array[i+1]);
+				mdelay(1);
+
+			}
+			break;
+		case RF90_PATH_D:
+			for(i = 0;i<RadioD_ArrayLength; i=i+2){
+
+				if(rtl819XRadioD_Array[i] == 0xfe){
+						mdelay(100);
+						continue;
+				}
+				rtl8192_phy_SetRFReg(dev, eRFPath, rtl819XRadioD_Array[i], bMask12Bits, rtl819XRadioD_Array[i+1]);
+				mdelay(1);
+
+			}
+			break;
+		default:
+			break;
+	}
+
+	return ret;;
+
+}
+/******************************************************************************
+ *function:  This function set Tx Power of the channel
+ *   input:  struct net_device *dev
+ *   	     u8 		channel
+ *  output:  none
+ *  return:  none
+ *    Note:
+ * ***************************************************************************/
+void rtl8192_SetTxPowerLevel(struct net_device *dev, u8 channel)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u8	powerlevel = priv->TxPowerLevelCCK[channel-1];
+	u8	powerlevelOFDM24G = priv->TxPowerLevelOFDM24G[channel-1];
+
+	switch(priv->rf_chip)
+	{
+	case RF_8225:
+#ifdef TO_DO_LIST
+		PHY_SetRF8225CckTxPower(Adapter, powerlevel);
+		PHY_SetRF8225OfdmTxPower(Adapter, powerlevelOFDM24G);
+#endif
+		break;
+
+	case RF_8256:
+		PHY_SetRF8256CCKTxPower(dev, powerlevel);
+		PHY_SetRF8256OFDMTxPower(dev, powerlevelOFDM24G);
+		break;
+
+	case RF_8258:
+		break;
+	default:
+		RT_TRACE(COMP_ERR, "unknown rf chip ID in rtl8192_SetTxPowerLevel()\n");
+		break;
+	}
+	return;
+}
+
+/******************************************************************************
+ *function:  This function set RF state on or off
+ *   input:  struct net_device *dev
+ *   	     RT_RF_POWER_STATE eRFPowerState  //Power State to set
+ *  output:  none
+ *  return:  none
+ *    Note:
+ * ***************************************************************************/
+bool rtl8192_SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerState)
+{
+	bool				bResult = true;
+//	u8					eRFPath;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	if(eRFPowerState == priv->ieee80211->eRFPowerState)
+		return false;
+
+	if(priv->SetRFPowerStateInProgress == true)
+		return false;
+
+	priv->SetRFPowerStateInProgress = true;
+
+	switch(priv->rf_chip)
+	{
+		case RF_8256:
+		switch( eRFPowerState )
+		{
+			case eRfOn:
+#if 0
+						rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x1);		// 0x860[4]
+						rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, 0x3);		// 0x88c[4]
+						rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x3); 		// 0x880[6:5]
+						rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0xf, 0x3);			// 0xc04[3:0]
+						rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x3);			// 0xd04[3:0]
+						rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0x7000, 0x3);	// 0x884[14:12]
+	//					for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
+		//					PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x2);
+
+						//SwChnl(Adapter->ChannelID);
+#endif
+	//RF-A, RF-B
+					//enable RF-Chip A/B
+					rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x1);	// 0x860[4]
+					//analog to digital on
+					rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, 0x3);// 0x88c[9:8]
+					//digital to analog on
+					rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x18, 0x3); // 0x880[4:3]
+					//rx antenna on
+					rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x3, 0x3);// 0xc04[1:0]
+					//rx antenna on
+					rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x3, 0x3);// 0xd04[1:0]
+					//analog to digital part2 on
+					rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x3); // 0x880[6:5]
+
+				break;
+
+			case eRfSleep:
+
+				break;
+
+			case eRfOff:
+#if 0
+						rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x0);		// 0x860[4]
+						rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, 0x0);		// 0x88c[4]
+						rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x0); 		// 0x880[6:5]
+						rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0xf, 0);			// 0xc04[3:0]
+						rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0);			// 0xd04[3:0]
+						rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0x7000, 0x0);	// 0x884[14:12]
+	//					for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
+		//					PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
+#endif
+					//RF-A, RF-B
+					//disable RF-Chip A/B
+					rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x0);	// 0x860[4]
+					//analog to digital off, for power save
+					rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, 0x0);// 0x88c[11:8]
+					//digital to analog off, for power save
+					rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x18, 0x0); // 0x880[4:3]
+					//rx antenna off
+					rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0xf, 0x0);// 0xc04[3:0]
+					//rx antenna off
+					rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x0);// 0xd04[3:0]
+					//analog to digital part2 off, for power save
+					rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x0); // 0x880[6:5]
+
+				break;
+
+			default:
+				bResult = false;
+				RT_TRACE(COMP_ERR, "SetRFPowerState819xUsb(): unknow state to set: 0x%X!!!\n", eRFPowerState);
+				break;
+		}
+			break;
+		default:
+			RT_TRACE(COMP_ERR, "Not support rf_chip(%x)\n", priv->rf_chip);
+			break;
+	}
+#ifdef TO_DO_LIST
+	if(bResult)
+	{
+		// Update current RF state variable.
+		pHalData->eRFPowerState = eRFPowerState;
+		switch(pHalData->RFChipID )
+		{
+			case RF_8256:
+		switch(pHalData->eRFPowerState)
+				{
+				case eRfOff:
+					//
+					//If Rf off reason is from IPS, Led should blink with no link, by Maddest 071015
+					//
+					if(pMgntInfo->RfOffReason==RF_CHANGE_BY_IPS )
+					{
+						Adapter->HalFunc.LedControlHandler(Adapter,LED_CTL_NO_LINK);
+					}
+					else
+					{
+						// Turn off LED if RF is not ON.
+						Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_POWER_OFF);
+					}
+					break;
+
+				case eRfOn:
+					// Turn on RF we are still linked, which might happen when
+					// we quickly turn off and on HW RF. 2006.05.12, by rcnjko.
+					if( pMgntInfo->bMediaConnect == TRUE )
+					{
+						Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_LINK);
+					}
+					else
+					{
+						// Turn off LED if RF is not ON.
+						Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_NO_LINK);
+					}
+					break;
+
+				default:
+					// do nothing.
+					break;
+				}// Switch RF state
+				break;
+
+				default:
+					RT_TRACE(COMP_RF, DBG_LOUD, ("SetRFPowerState8190(): Unknown RF type\n"));
+					break;
+			}
+
+	}
+#endif
+	priv->SetRFPowerStateInProgress = false;
+
+	return bResult;
+}
+
+/****************************************************************************************
+ *function:  This function set command table variable(struct SwChnlCmd).
+ *   input:  SwChnlCmd*		CmdTable 	//table to be set.
+ *   	     u32		CmdTableIdx 	//variable index in table to be set
+ *   	     u32		CmdTableSz	//table size.
+ *   	     SwChnlCmdID	CmdID		//command ID to set.
+ *	     u32		Para1
+ *	     u32		Para2
+ *	     u32		msDelay
+ *  output:
+ *  return:  true if finished, false otherwise
+ *    Note:
+ * ************************************************************************************/
+u8 rtl8192_phy_SetSwChnlCmdArray(
+	SwChnlCmd*		CmdTable,
+	u32			CmdTableIdx,
+	u32			CmdTableSz,
+	SwChnlCmdID		CmdID,
+	u32			Para1,
+	u32			Para2,
+	u32			msDelay
+	)
+{
+	SwChnlCmd* pCmd;
+
+	if(CmdTable == NULL)
+	{
+		RT_TRACE(COMP_ERR, "phy_SetSwChnlCmdArray(): CmdTable cannot be NULL.\n");
+		return false;
+	}
+	if(CmdTableIdx >= CmdTableSz)
+	{
+		RT_TRACE(COMP_ERR, "phy_SetSwChnlCmdArray(): Access invalid index, please check size of the table, CmdTableIdx:%d, CmdTableSz:%d\n",
+				CmdTableIdx, CmdTableSz);
+		return false;
+	}
+
+	pCmd = CmdTable + CmdTableIdx;
+	pCmd->CmdID = CmdID;
+	pCmd->Para1 = Para1;
+	pCmd->Para2 = Para2;
+	pCmd->msDelay = msDelay;
+
+	return true;
+}
+/******************************************************************************
+ *function:  This function set channel step by step
+ *   input:  struct net_device *dev
+ *   	     u8 		channel
+ *   	     u8* 		stage //3 stages
+ *   	     u8* 		step  //
+ *   	     u32* 		delay //whether need to delay
+ *  output:  store new stage, step and delay for next step(combine with function above)
+ *  return:  true if finished, false otherwise
+ *    Note:  Wait for simpler function to replace it //wb
+ * ***************************************************************************/
+u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8* stage, u8* step, u32* delay)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+//	PCHANNEL_ACCESS_SETTING	pChnlAccessSetting;
+	SwChnlCmd				PreCommonCmd[MAX_PRECMD_CNT];
+	u32					PreCommonCmdCnt;
+	SwChnlCmd				PostCommonCmd[MAX_POSTCMD_CNT];
+	u32					PostCommonCmdCnt;
+	SwChnlCmd				RfDependCmd[MAX_RFDEPENDCMD_CNT];
+	u32					RfDependCmdCnt;
+	SwChnlCmd				*CurrentCmd = NULL;
+	//RF90_RADIO_PATH_E		eRFPath;
+	u8		eRFPath;
+//	u32		RfRetVal;
+//	u8		RetryCnt;
+
+	RT_TRACE(COMP_CH, "====>%s()====stage:%d, step:%d, channel:%d\n", __FUNCTION__, *stage, *step, channel);
+//	RT_ASSERT(IsLegalChannel(Adapter, channel), ("illegal channel: %d\n", channel));
+#ifdef ENABLE_DOT11D
+	if (!IsLegalChannel(priv->ieee80211, channel))
+	{
+		RT_TRACE(COMP_ERR, "=============>set to illegal channel:%d\n", channel);
+		return true; //return true to tell upper caller function this channel setting is finished! Or it will in while loop.
+	}
+#endif
+//FIXME:need to check whether channel is legal or not here.WB
+
+
+	//for(eRFPath = RF90_PATH_A; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
+//	for(eRFPath = 0; eRFPath <RF90_PATH_MAX; eRFPath++)
+//	{
+//		if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
+//			continue;
+		// <1> Fill up pre common command.
+		PreCommonCmdCnt = 0;
+		rtl8192_phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, MAX_PRECMD_CNT,
+					CmdID_SetTxPowerLevel, 0, 0, 0);
+		rtl8192_phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, MAX_PRECMD_CNT,
+					CmdID_End, 0, 0, 0);
+
+		// <2> Fill up post common command.
+		PostCommonCmdCnt = 0;
+
+		rtl8192_phy_SetSwChnlCmdArray(PostCommonCmd, PostCommonCmdCnt++, MAX_POSTCMD_CNT,
+					CmdID_End, 0, 0, 0);
+
+		// <3> Fill up RF dependent command.
+		RfDependCmdCnt = 0;
+		switch( priv->rf_chip )
+		{
+		case RF_8225:
+			if (!(channel >= 1 && channel <= 14))
+			{
+				RT_TRACE(COMP_ERR, "illegal channel for Zebra 8225: %d\n", channel);
+				return true;
+			}
+			rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT,
+				CmdID_RF_WriteReg, rZebra1_Channel, RF_CHANNEL_TABLE_ZEBRA[channel], 10);
+			rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT,
+				CmdID_End, 0, 0, 0);
+			break;
+
+		case RF_8256:
+			// TEST!! This is not the table for 8256!!
+			if (!(channel >= 1 && channel <= 14))
+			{
+				RT_TRACE(COMP_ERR, "illegal channel for Zebra 8256: %d\n", channel);
+				return true;
+			}
+			rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT,
+				CmdID_RF_WriteReg, rZebra1_Channel, channel, 10);
+			rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT,
+			CmdID_End, 0, 0, 0);
+			break;
+
+		case RF_8258:
+			break;
+
+		default:
+			RT_TRACE(COMP_ERR, "Unknown RFChipID: %d\n", priv->rf_chip);
+			return true;
+			break;
+		}
+
+
+		do{
+			switch(*stage)
+			{
+			case 0:
+				CurrentCmd=&PreCommonCmd[*step];
+				break;
+			case 1:
+				CurrentCmd=&RfDependCmd[*step];
+				break;
+			case 2:
+				CurrentCmd=&PostCommonCmd[*step];
+				break;
+			}
+
+			if(CurrentCmd->CmdID==CmdID_End)
+			{
+				if((*stage)==2)
+				{
+					(*delay)=CurrentCmd->msDelay;
+					return true;
+				}
+				else
+				{
+					(*stage)++;
+					(*step)=0;
+					continue;
+				}
+			}
+
+			switch(CurrentCmd->CmdID)
+			{
+			case CmdID_SetTxPowerLevel:
+				if(priv->card_8192_version == (u8)VERSION_819xU_A) //xiong: consider it later!
+					rtl8192_SetTxPowerLevel(dev,channel);
+				break;
+			case CmdID_WritePortUlong:
+				write_nic_dword(dev, CurrentCmd->Para1, CurrentCmd->Para2);
+				break;
+			case CmdID_WritePortUshort:
+				write_nic_word(dev, CurrentCmd->Para1, (u16)CurrentCmd->Para2);
+				break;
+			case CmdID_WritePortUchar:
+				write_nic_byte(dev, CurrentCmd->Para1, (u8)CurrentCmd->Para2);
+				break;
+			case CmdID_RF_WriteReg:
+				for(eRFPath = 0; eRFPath < RF90_PATH_MAX; eRFPath++)
+				{
+				rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, bZebra1_ChannelNum, CurrentCmd->Para2);
+				}
+				break;
+			default:
+				break;
+			}
+
+			break;
+		}while(true);
+//	}/*for(Number of RF paths)*/
+
+	(*delay)=CurrentCmd->msDelay;
+	(*step)++;
+	return false;
+}
+
+/******************************************************************************
+ *function:  This function does acturally set channel work
+ *   input:  struct net_device *dev
+ *   	     u8 		channel
+ *  output:  none
+ *  return:  noin
+ *    Note:  We should not call this function directly
+ * ***************************************************************************/
+void rtl8192_phy_FinishSwChnlNow(struct net_device *dev, u8 channel)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u32	delay = 0;
+
+	while(!rtl8192_phy_SwChnlStepByStep(dev,channel,&priv->SwChnlStage,&priv->SwChnlStep,&delay))
+	{
+	//	if(delay>0)
+	//		msleep(delay);//or mdelay? need further consideration
+		if(!priv->up)
+			break;
+	}
+}
+/******************************************************************************
+ *function:  Callback routine of the work item for switch channel.
+ *   input:
+ *
+ *  output:  none
+ *  return:  noin
+ * ***************************************************************************/
+void rtl8192_SwChnl_WorkItem(struct net_device *dev)
+{
+
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	RT_TRACE(COMP_CH, "==> SwChnlCallback819xUsbWorkItem(), chan:%d\n", priv->chan);
+
+
+	rtl8192_phy_FinishSwChnlNow(dev , priv->chan);
+
+	RT_TRACE(COMP_CH, "<== SwChnlCallback819xUsbWorkItem()\n");
+}
+
+/******************************************************************************
+ *function:  This function scheduled actural workitem to set channel
+ *   input:  net_device dev
+ *   	     u8		channel //channel to set
+ *  output:  none
+ *  return:  return code show if workitem is scheduled(1:pass, 0:fail)
+ *    Note:  Delay may be required for RF configuration
+ * ***************************************************************************/
+u8 rtl8192_phy_SwChnl(struct net_device* dev, u8 channel)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	RT_TRACE(COMP_CH, "=====>%s(), SwChnlInProgress:%d\n", __FUNCTION__, priv->SwChnlInProgress);
+	if(!priv->up)
+		return false;
+	if(priv->SwChnlInProgress)
+		return false;
+
+//	if(pHalData->SetBWModeInProgress)
+//		return;
+if (0) //to test current channel from RF reg 0x7.
+{
+	u8		eRFPath;
+	for(eRFPath = 0; eRFPath < 2; eRFPath++){
+	printk("====>set channel:%x\n",rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x7, bZebra1_ChannelNum));
+	udelay(10);
+	}
+}
+	//--------------------------------------------
+	switch(priv->ieee80211->mode)
+	{
+	case WIRELESS_MODE_A:
+	case WIRELESS_MODE_N_5G:
+		if (channel<=14){
+			RT_TRACE(COMP_ERR, "WIRELESS_MODE_A but channel<=14");
+			return false;
+		}
+		break;
+	case WIRELESS_MODE_B:
+		if (channel>14){
+			RT_TRACE(COMP_ERR, "WIRELESS_MODE_B but channel>14");
+			return false;
+		}
+		break;
+	case WIRELESS_MODE_G:
+	case WIRELESS_MODE_N_24G:
+		if (channel>14){
+			RT_TRACE(COMP_ERR, "WIRELESS_MODE_G but channel>14");
+			return false;
+		}
+		break;
+	}
+	//--------------------------------------------
+
+	priv->SwChnlInProgress = true;
+	if(channel == 0)
+		channel = 1;
+
+	priv->chan=channel;
+
+	priv->SwChnlStage=0;
+	priv->SwChnlStep=0;
+//	schedule_work(&(priv->SwChnlWorkItem));
+//	rtl8192_SwChnl_WorkItem(dev);
+	if(priv->up) {
+//		queue_work(priv->priv_wq,&(priv->SwChnlWorkItem));
+	rtl8192_SwChnl_WorkItem(dev);
+	}
+
+	priv->SwChnlInProgress = false;
+	return true;
+}
+
+
+//
+/******************************************************************************
+ *function:  Callback routine of the work item for set bandwidth mode.
+ *   input:  struct net_device *dev
+ *   	     HT_CHANNEL_WIDTH	Bandwidth  //20M or 40M
+ *   	     HT_EXTCHNL_OFFSET Offset 	   //Upper, Lower, or Don't care
+ *  output:  none
+ *  return:  none
+ *    Note:  I doubt whether SetBWModeInProgress flag is necessary as we can
+ *    	     test whether current work in the queue or not.//do I?
+ * ***************************************************************************/
+void rtl8192_SetBWModeWorkItem(struct net_device *dev)
+{
+
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u8 regBwOpMode;
+
+	RT_TRACE(COMP_SWBW, "==>rtl8192_SetBWModeWorkItem()  Switch to %s bandwidth\n", \
+					priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz")
+
+
+	if(priv->rf_chip == RF_PSEUDO_11N)
+	{
+		priv->SetBWModeInProgress= false;
+		return;
+	}
+
+	//<1>Set MAC register
+	regBwOpMode = read_nic_byte(dev, BW_OPMODE);
+
+	switch(priv->CurrentChannelBW)
+	{
+		case HT_CHANNEL_WIDTH_20:
+			regBwOpMode |= BW_OPMODE_20MHZ;
+		       // 2007/02/07 Mark by Emily becasue we have not verify whether this register works
+			write_nic_byte(dev, BW_OPMODE, regBwOpMode);
+			break;
+
+		case HT_CHANNEL_WIDTH_20_40:
+			regBwOpMode &= ~BW_OPMODE_20MHZ;
+        		// 2007/02/07 Mark by Emily becasue we have not verify whether this register works
+			write_nic_byte(dev, BW_OPMODE, regBwOpMode);
+			break;
+
+		default:
+			RT_TRACE(COMP_ERR, "SetChannelBandwidth819xUsb(): unknown Bandwidth: %#X\n",priv->CurrentChannelBW);
+			break;
+	}
+
+	//<2>Set PHY related register
+	switch(priv->CurrentChannelBW)
+	{
+		case HT_CHANNEL_WIDTH_20:
+			// Add by Vivi 20071119
+			rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x0);
+			rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x0);
+			rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 1);
+
+			// Correct the tx power for CCK rate in 20M. Suggest by YN, 20071207
+#if 0
+			write_nic_dword(dev, rCCK0_TxFilter1, 0x1a1b0000);
+			write_nic_dword(dev, rCCK0_TxFilter2, 0x090e1317);
+			write_nic_dword(dev, rCCK0_DebugPort, 0x00000204);
+#endif
+			priv->cck_present_attentuation =
+				priv->cck_present_attentuation_20Mdefault + priv->cck_present_attentuation_difference;
+
+			if(priv->cck_present_attentuation > 22)
+				priv->cck_present_attentuation= 22;
+			if(priv->cck_present_attentuation< 0)
+				priv->cck_present_attentuation = 0;
+			RT_TRACE(COMP_INIT, "20M, pHalData->CCKPresentAttentuation = %d\n", priv->cck_present_attentuation);
+
+			if(priv->chan == 14 && !priv->bcck_in_ch14)
+			{
+				priv->bcck_in_ch14 = TRUE;
+				dm_cck_txpower_adjust(dev,priv->bcck_in_ch14);
+			}
+			else if(priv->chan != 14 && priv->bcck_in_ch14)
+			{
+				priv->bcck_in_ch14 = FALSE;
+				dm_cck_txpower_adjust(dev,priv->bcck_in_ch14);
+			}
+			else
+				dm_cck_txpower_adjust(dev,priv->bcck_in_ch14);
+
+			break;
+		case HT_CHANNEL_WIDTH_20_40:
+			// Add by Vivi 20071119
+			rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x1);
+			rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x1);
+			rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1));
+                   	rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 0);
+			rtl8192_setBBreg(dev, rOFDM1_LSTF, 0xC00, priv->nCur40MhzPrimeSC);
+#if 0
+			// Correct the tx power for CCK rate in 40M. Suggest by YN, 20071207
+			write_nic_dword(dev, rCCK0_TxFilter1, 0x35360000);
+			write_nic_dword(dev, rCCK0_TxFilter2, 0x121c252e);
+			write_nic_dword(dev, rCCK0_DebugPort, 0x00000409);
+#endif
+			priv->cck_present_attentuation =
+				priv->cck_present_attentuation_40Mdefault + priv->cck_present_attentuation_difference;
+
+			if(priv->cck_present_attentuation > 22)
+				priv->cck_present_attentuation = 22;
+			if(priv->cck_present_attentuation < 0)
+				priv->cck_present_attentuation = 0;
+
+			RT_TRACE(COMP_INIT, "40M, pHalData->CCKPresentAttentuation = %d\n", priv->cck_present_attentuation);
+			if(priv->chan == 14 && !priv->bcck_in_ch14)
+			{
+				priv->bcck_in_ch14 = true;
+				dm_cck_txpower_adjust(dev,priv->bcck_in_ch14);
+			}
+			else if(priv->chan!= 14 && priv->bcck_in_ch14)
+			{
+				priv->bcck_in_ch14 = false;
+				dm_cck_txpower_adjust(dev,priv->bcck_in_ch14);
+			}
+			else
+				dm_cck_txpower_adjust(dev,priv->bcck_in_ch14);
+
+			break;
+		default:
+			RT_TRACE(COMP_ERR, "SetChannelBandwidth819xUsb(): unknown Bandwidth: %#X\n" ,priv->CurrentChannelBW);
+			break;
+
+	}
+	//Skip over setting of J-mode in BB register here. Default value is "None J mode". Emily 20070315
+
+#if 1
+	//<3>Set RF related register
+	switch( priv->rf_chip )
+	{
+		case RF_8225:
+#ifdef TO_DO_LIST
+			PHY_SetRF8225Bandwidth(Adapter, pHalData->CurrentChannelBW);
+#endif
+			break;
+
+		case RF_8256:
+			PHY_SetRF8256Bandwidth(dev, priv->CurrentChannelBW);
+			break;
+
+		case RF_8258:
+			// PHY_SetRF8258Bandwidth();
+			break;
+
+		case RF_PSEUDO_11N:
+			// Do Nothing
+			break;
+
+		default:
+			RT_TRACE(COMP_ERR, "Unknown RFChipID: %d\n", priv->rf_chip);
+			break;
+	}
+#endif
+	priv->SetBWModeInProgress= false;
+
+	RT_TRACE(COMP_SWBW, "<==SetBWMode819xUsb(), %d", atomic_read(&(priv->ieee80211->atm_swbw)) );
+}
+
+/******************************************************************************
+ *function:  This function schedules bandwith switch work.
+ *   input:  struct net_device *dev
+ *   	     HT_CHANNEL_WIDTH	Bandwidth  //20M or 40M
+ *   	     HT_EXTCHNL_OFFSET Offset 	   //Upper, Lower, or Don't care
+ *  output:  none
+ *  return:  none
+ *    Note:  I doubt whether SetBWModeInProgress flag is necessary as we can
+ *    	     test whether current work in the queue or not.//do I?
+ * ***************************************************************************/
+void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH	Bandwidth, HT_EXTCHNL_OFFSET Offset)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	if(priv->SetBWModeInProgress)
+		return;
+	priv->SetBWModeInProgress= true;
+
+	priv->CurrentChannelBW = Bandwidth;
+
+	if(Offset==HT_EXTCHNL_OFFSET_LOWER)
+		priv->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_UPPER;
+	else if(Offset==HT_EXTCHNL_OFFSET_UPPER)
+		priv->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_LOWER;
+	else
+		priv->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
+
+	//queue_work(priv->priv_wq, &(priv->SetBWModeWorkItem));
+	//	schedule_work(&(priv->SetBWModeWorkItem));
+	rtl8192_SetBWModeWorkItem(dev);
+
+}
+
+void InitialGain819xUsb(struct net_device *dev,	u8 Operation)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+
+	priv->InitialGainOperateType = Operation;
+
+	if(priv->up)
+	{
+	#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+		queue_delayed_work(priv->priv_wq,&priv->initialgain_operate_wq,0);
+	#else
+		#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+		schedule_task(&priv->initialgain_operate_wq);
+		#else
+		queue_work(priv->priv_wq,&priv->initialgain_operate_wq);
+		#endif
+	#endif
+	}
+}
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+extern void InitialGainOperateWorkItemCallBack(struct work_struct *work)
+{
+	struct delayed_work *dwork = container_of(work,struct delayed_work,work);
+       struct r8192_priv *priv = container_of(dwork,struct r8192_priv,initialgain_operate_wq);
+       struct net_device *dev = priv->ieee80211->dev;
+#else
+extern void InitialGainOperateWorkItemCallBack(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+#endif
+#define SCAN_RX_INITIAL_GAIN	0x17
+#define POWER_DETECTION_TH	0x08
+	u32	BitMask;
+	u8	initial_gain;
+	u8	Operation;
+
+	Operation = priv->InitialGainOperateType;
+
+	switch(Operation)
+	{
+		case IG_Backup:
+			RT_TRACE(COMP_SCAN, "IG_Backup, backup the initial gain.\n");
+			initial_gain = SCAN_RX_INITIAL_GAIN;//priv->DefaultInitialGain[0];//
+			BitMask = bMaskByte0;
+			if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM)
+				rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8);	// FW DIG OFF
+			priv->initgain_backup.xaagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XAAGCCore1, BitMask);
+			priv->initgain_backup.xbagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XBAGCCore1, BitMask);
+			priv->initgain_backup.xcagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XCAGCCore1, BitMask);
+			priv->initgain_backup.xdagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XDAGCCore1, BitMask);
+			BitMask  = bMaskByte2;
+			priv->initgain_backup.cca		= (u8)rtl8192_QueryBBReg(dev, rCCK0_CCA, BitMask);
+
+			RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc50 is %x\n",priv->initgain_backup.xaagccore1);
+			RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc58 is %x\n",priv->initgain_backup.xbagccore1);
+			RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc60 is %x\n",priv->initgain_backup.xcagccore1);
+			RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc68 is %x\n",priv->initgain_backup.xdagccore1);
+			RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xa0a is %x\n",priv->initgain_backup.cca);
+
+			RT_TRACE(COMP_SCAN, "Write scan initial gain = 0x%x \n", initial_gain);
+			write_nic_byte(dev, rOFDM0_XAAGCCore1, initial_gain);
+			write_nic_byte(dev, rOFDM0_XBAGCCore1, initial_gain);
+			write_nic_byte(dev, rOFDM0_XCAGCCore1, initial_gain);
+			write_nic_byte(dev, rOFDM0_XDAGCCore1, initial_gain);
+			RT_TRACE(COMP_SCAN, "Write scan 0xa0a = 0x%x \n", POWER_DETECTION_TH);
+			write_nic_byte(dev, 0xa0a, POWER_DETECTION_TH);
+			break;
+		case IG_Restore:
+			RT_TRACE(COMP_SCAN, "IG_Restore, restore the initial gain.\n");
+			BitMask = 0x7f; //Bit0~ Bit6
+			if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM)
+				rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8);	// FW DIG OFF
+
+			rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, BitMask, (u32)priv->initgain_backup.xaagccore1);
+			rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, BitMask, (u32)priv->initgain_backup.xbagccore1);
+			rtl8192_setBBreg(dev, rOFDM0_XCAGCCore1, BitMask, (u32)priv->initgain_backup.xcagccore1);
+			rtl8192_setBBreg(dev, rOFDM0_XDAGCCore1, BitMask, (u32)priv->initgain_backup.xdagccore1);
+			BitMask  = bMaskByte2;
+			rtl8192_setBBreg(dev, rCCK0_CCA, BitMask, (u32)priv->initgain_backup.cca);
+
+			RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc50 is %x\n",priv->initgain_backup.xaagccore1);
+			RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc58 is %x\n",priv->initgain_backup.xbagccore1);
+			RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc60 is %x\n",priv->initgain_backup.xcagccore1);
+			RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc68 is %x\n",priv->initgain_backup.xdagccore1);
+			RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xa0a is %x\n",priv->initgain_backup.cca);
+
+#ifdef RTL8190P
+			SetTxPowerLevel8190(Adapter,priv->CurrentChannel);
+#endif
+#ifdef RTL8192E
+			SetTxPowerLevel8190(Adapter,priv->CurrentChannel);
+#endif
+//#ifdef RTL8192U
+			rtl8192_phy_setTxPower(dev,priv->ieee80211->current_network.channel);
+//#endif
+
+			if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM)
+				rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1);	// FW DIG ON
+			break;
+		default:
+			RT_TRACE(COMP_SCAN, "Unknown IG Operation. \n");
+			break;
+	}
+}
+
diff --git a/drivers/staging/rtl8192su/r819xU_phy.h b/drivers/staging/rtl8192su/r819xU_phy.h
new file mode 100644
index 00000000000..c165ac1265d
--- /dev/null
+++ b/drivers/staging/rtl8192su/r819xU_phy.h
@@ -0,0 +1,94 @@
+#ifndef _R819XU_PHY_H
+#define _R819XU_PHY_H
+
+/* Channel switch:The size of command tables for switch channel*/
+#define MAX_PRECMD_CNT 16
+#define MAX_RFDEPENDCMD_CNT 16
+#define MAX_POSTCMD_CNT 16
+
+typedef enum _SwChnlCmdID{
+	CmdID_End,
+	CmdID_SetTxPowerLevel,
+	CmdID_BBRegWrite10,
+	CmdID_WritePortUlong,
+	CmdID_WritePortUshort,
+	CmdID_WritePortUchar,
+	CmdID_RF_WriteReg,
+}SwChnlCmdID;
+
+/*--------------------------------Define structure--------------------------------*/
+/* 1. Switch channel related */
+typedef struct _SwChnlCmd{
+	SwChnlCmdID	CmdID;
+	u32			Para1;
+	u32			Para2;
+	u32			msDelay;
+}__attribute__ ((packed)) SwChnlCmd;
+
+extern u32 rtl819XMACPHY_Array_PG[];
+extern u32 rtl819XPHY_REG_1T2RArray[];
+extern u32 rtl819XAGCTAB_Array[];
+extern u32 rtl819XRadioA_Array[];
+extern u32 rtl819XRadioB_Array[];
+extern u32 rtl819XRadioC_Array[];
+extern u32 rtl819XRadioD_Array[];
+
+typedef enum _HW90_BLOCK{
+	HW90_BLOCK_MAC = 0,
+	HW90_BLOCK_PHY0 = 1,
+	HW90_BLOCK_PHY1 = 2,
+	HW90_BLOCK_RF = 3,
+	HW90_BLOCK_MAXIMUM = 4, // Never use this
+}HW90_BLOCK_E, *PHW90_BLOCK_E;
+
+typedef enum _RF90_RADIO_PATH{
+	RF90_PATH_A = 0,			//Radio Path A
+	RF90_PATH_B = 1,			//Radio Path B
+	RF90_PATH_C = 2,			//Radio Path C
+	RF90_PATH_D = 3,			//Radio Path D
+	RF90_PATH_MAX				//Max RF number 92 support
+}RF90_RADIO_PATH_E, *PRF90_RADIO_PATH_E;
+
+#define bMaskByte0                0xff
+#define bMaskByte1                0xff00
+#define bMaskByte2                0xff0000
+#define bMaskByte3                0xff000000
+#define bMaskHWord                0xffff0000
+#define bMaskLWord                0x0000ffff
+#define bMaskDWord                0xffffffff
+
+//extern u32 rtl8192_CalculateBitShift(u32 dwBitMask);
+extern u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device* dev, u32 eRFPath);
+extern void rtl8192_setBBreg(struct net_device* dev, u32 dwRegAddr, u32 dwBitMask, u32 dwData);
+extern u32 rtl8192_QueryBBReg(struct net_device* dev, u32 dwRegAddr, u32 dwBitMask);
+//extern u32 rtl8192_phy_RFSerialRead(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset);
+//extern void rtl8192_phy_RFSerialWrite(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data);
+extern void rtl8192_phy_SetRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask, u32 Data);
+extern u32 rtl8192_phy_QueryRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask);
+extern void rtl8192_phy_configmac(struct net_device* dev);
+extern void rtl8192_phyConfigBB(struct net_device* dev, u8 ConfigType);
+//extern void rtl8192_InitBBRFRegDef(struct net_device* dev);
+extern u8 rtl8192_phy_checkBBAndRF(struct net_device* dev, HW90_BLOCK_E CheckBlock, RF90_RADIO_PATH_E eRFPath);
+//extern void rtl8192_BB_Config_ParaFile(struct net_device* dev);
+extern void rtl8192_BBConfig(struct net_device* dev);
+extern void rtl8192_phy_getTxPower(struct net_device* dev);
+extern void rtl8192_phy_setTxPower(struct net_device* dev, u8 channel);
+extern void rtl8192_phy_RFConfig(struct net_device* dev);
+extern void rtl8192_phy_updateInitGain(struct net_device* dev);
+extern u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E	eRFPath);
+
+extern u8 rtl8192_phy_SwChnl(struct net_device* dev, u8 channel);
+extern void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH	Bandwidth, HT_EXTCHNL_OFFSET Offset);
+extern void rtl8192_SwChnl_WorkItem(struct net_device *dev);
+void rtl8192_SetBWModeWorkItem(struct net_device *dev);
+extern bool rtl8192_SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerState);
+//added by amy
+extern void InitialGain819xUsb(struct net_device *dev,	u8 Operation);
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+extern void InitialGainOperateWorkItemCallBack(struct work_struct *work);
+#else
+extern void InitialGainOperateWorkItemCallBack(struct net_device *dev);
+#endif
+
+#endif
diff --git a/drivers/staging/rtl8192su/r819xU_phyreg.h b/drivers/staging/rtl8192su/r819xU_phyreg.h
new file mode 100644
index 00000000000..b62f1a6fb1e
--- /dev/null
+++ b/drivers/staging/rtl8192su/r819xU_phyreg.h
@@ -0,0 +1,871 @@
+#ifndef _R819XU_PHYREG_H
+#define _R819XU_PHYREG_H
+
+
+#define   RF_DATA				0x1d4					// FW will write RF data in the register.
+
+//Register   //duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF
+//page 1
+#define rPMAC_Reset               		0x100
+#define rPMAC_TxStart             		0x104
+#define rPMAC_TxLegacySIG         		0x108
+#define rPMAC_TxHTSIG1            		0x10c
+#define rPMAC_TxHTSIG2            		0x110
+#define rPMAC_PHYDebug            		0x114
+#define rPMAC_TxPacketNum         		0x118
+#define rPMAC_TxIdle              		0x11c
+#define rPMAC_TxMACHeader0       	0x120
+#define rPMAC_TxMACHeader1       	0x124
+#define rPMAC_TxMACHeader2       	0x128
+#define rPMAC_TxMACHeader3       	0x12c
+#define rPMAC_TxMACHeader4       	0x130
+#define rPMAC_TxMACHeader5       	0x134
+#define rPMAC_TxDataType          		0x138
+#define rPMAC_TxRandomSeed      		0x13c
+#define rPMAC_CCKPLCPPreamble  		0x140
+#define rPMAC_CCKPLCPHeader     		0x144
+#define rPMAC_CCKCRC16            		0x148
+#define rPMAC_OFDMRxCRC32OK  		0x170
+#define rPMAC_OFDMRxCRC32Er   		0x174
+#define rPMAC_OFDMRxParityEr    		0x178
+#define rPMAC_OFDMRxCRC8Er     		0x17c
+#define rPMAC_CCKCRxRC16Er       		0x180
+#define rPMAC_CCKCRxRC32Er       		0x184
+#define rPMAC_CCKCRxRC32OK      		0x188
+#define rPMAC_TxStatus            		0x18c
+
+//page8
+#define rFPGA0_RFMOD              		0x800  //RF mode & CCK TxSC
+#define rFPGA0_TxInfo             		0x804
+#define rFPGA0_PSDFunction        		0x808
+#define rFPGA0_TxGainStage        		0x80c
+#define rFPGA0_RFTiming1          		0x810
+#define rFPGA0_RFTiming2          		0x814
+//#define rFPGA0_XC_RFTiming        		0x818
+//#define rFPGA0_XD_RFTiming        		0x81c
+#define rFPGA0_XA_HSSIParameter1  	0x820
+#define rFPGA0_XA_HSSIParameter2  	0x824
+#define rFPGA0_XB_HSSIParameter1  	0x828
+#define rFPGA0_XB_HSSIParameter2  	0x82c
+#define rFPGA0_XC_HSSIParameter1  	0x830
+#define rFPGA0_XC_HSSIParameter2  	0x834
+#define rFPGA0_XD_HSSIParameter1  	0x838
+#define rFPGA0_XD_HSSIParameter2  	0x83c
+#define rFPGA0_XA_LSSIParameter   	0x840
+#define rFPGA0_XB_LSSIParameter   	0x844
+#define rFPGA0_XC_LSSIParameter   	0x848
+#define rFPGA0_XD_LSSIParameter   	0x84c
+#define rFPGA0_RFWakeUpParameter  	0x850
+#define rFPGA0_RFSleepUpParameter 	0x854
+#define rFPGA0_XAB_SwitchControl  	0x858
+#define rFPGA0_XCD_SwitchControl  	0x85c
+#define rFPGA0_XA_RFInterfaceOE   	0x860
+#define rFPGA0_XB_RFInterfaceOE   	0x864
+#define rFPGA0_XC_RFInterfaceOE   	0x868
+#define rFPGA0_XD_RFInterfaceOE   	0x86c
+#define rFPGA0_XAB_RFInterfaceSW  	0x870
+#define rFPGA0_XCD_RFInterfaceSW  	0x874
+#define rFPGA0_XAB_RFParameter    	0x878
+#define rFPGA0_XCD_RFParameter    	0x87c
+#define rFPGA0_AnalogParameter1   	0x880
+#define rFPGA0_AnalogParameter2   	0x884
+#define rFPGA0_AnalogParameter3   	0x888
+#define rFPGA0_AnalogParameter4   	0x88c
+#define rFPGA0_XA_LSSIReadBack    	0x8a0
+#define rFPGA0_XB_LSSIReadBack    	0x8a4
+#define rFPGA0_XC_LSSIReadBack    	0x8a8
+#define rFPGA0_XD_LSSIReadBack    	0x8ac
+#define rFPGA0_PSDReport          		0x8b4
+#define rFPGA0_XAB_RFInterfaceRB  	0x8e0
+#define rFPGA0_XCD_RFInterfaceRB  	0x8e4
+
+//page 9
+#define rFPGA1_RFMOD              		0x900  //RF mode & OFDM TxSC
+#define rFPGA1_TxBlock            		0x904
+#define rFPGA1_DebugSelect        		0x908
+#define rFPGA1_TxInfo             		0x90c
+
+//page a
+#define rCCK0_System              		0xa00
+#define rCCK0_AFESetting          		0xa04
+#define rCCK0_CCA                 			0xa08
+#define rCCK0_RxAGC1              		0xa0c  //AGC default value, saturation level
+#define rCCK0_RxAGC2              		0xa10  //AGC & DAGC
+#define rCCK0_RxHP                		0xa14
+#define rCCK0_DSPParameter1       	0xa18  //Timing recovery & Channel estimation threshold
+#define rCCK0_DSPParameter2       	0xa1c  //SQ threshold
+#define rCCK0_TxFilter1           		0xa20
+#define rCCK0_TxFilter2           		0xa24
+#define rCCK0_DebugPort           		0xa28  //debug port and Tx filter3
+#define rCCK0_FalseAlarmReport    	0xa2c  //0xa2d
+#define rCCK0_TRSSIReport         		0xa50
+#define rCCK0_RxReport            		0xa54  //0xa57
+#define rCCK0_FACounterLower      	0xa5c  //0xa5b
+#define rCCK0_FACounterUpper      	0xa58  //0xa5c
+
+//page c
+#define rOFDM0_LSTF               		0xc00
+#define rOFDM0_TRxPathEnable      	0xc04
+#define rOFDM0_TRMuxPar           		0xc08
+#define rOFDM0_TRSWIsolation      		0xc0c
+#define rOFDM0_XARxAFE            		0xc10  //RxIQ DC offset, Rx digital filter, DC notch filter
+#define rOFDM0_XARxIQImbalance    	0xc14  //RxIQ imblance matrix
+#define rOFDM0_XBRxAFE            		0xc18
+#define rOFDM0_XBRxIQImbalance    	0xc1c
+#define rOFDM0_XCRxAFE            		0xc20
+#define rOFDM0_XCRxIQImbalance    	0xc24
+#define rOFDM0_XDRxAFE            		0xc28
+#define rOFDM0_XDRxIQImbalance    	0xc2c
+#define rOFDM0_RxDetector1        		0xc30  //PD,BW & SBD
+#define rOFDM0_RxDetector2        		0xc34  //SBD & Fame Sync.
+#define rOFDM0_RxDetector3        		0xc38  //Frame Sync.
+#define rOFDM0_RxDetector4        		0xc3c  //PD, SBD, Frame Sync & Short-GI
+#define rOFDM0_RxDSP              		0xc40  //Rx Sync Path
+#define rOFDM0_CFOandDAGC         	0xc44  //CFO & DAGC
+#define rOFDM0_CCADropThreshold   	0xc48 //CCA Drop threshold
+#define rOFDM0_ECCAThreshold      	0xc4c // energy CCA
+#define rOFDM0_XAAGCCore1         	0xc50
+#define rOFDM0_XAAGCCore2         	0xc54
+#define rOFDM0_XBAGCCore1         	0xc58
+#define rOFDM0_XBAGCCore2         	0xc5c
+#define rOFDM0_XCAGCCore1         	0xc60
+#define rOFDM0_XCAGCCore2         	0xc64
+#define rOFDM0_XDAGCCore1         	0xc68
+#define rOFDM0_XDAGCCore2         	0xc6c
+#define rOFDM0_AGCParameter1      	0xc70
+#define rOFDM0_AGCParameter2      	0xc74
+#define rOFDM0_AGCRSSITable       	0xc78
+#define rOFDM0_HTSTFAGC           		0xc7c
+#define rOFDM0_XATxIQImbalance   	0xc80
+#define rOFDM0_XATxAFE            		0xc84
+#define rOFDM0_XBTxIQImbalance    	0xc88
+#define rOFDM0_XBTxAFE            		0xc8c
+#define rOFDM0_XCTxIQImbalance    	0xc90
+#define rOFDM0_XCTxAFE            		0xc94
+#define rOFDM0_XDTxIQImbalance    	0xc98
+#define rOFDM0_XDTxAFE            		0xc9c
+#define rOFDM0_RxHPParameter      	0xce0
+#define rOFDM0_TxPseudoNoiseWgt   	0xce4
+#define rOFDM0_FrameSync          		0xcf0
+#define rOFDM0_DFSReport          		0xcf4
+#define rOFDM0_TxCoeff1           		0xca4
+#define rOFDM0_TxCoeff2           		0xca8
+#define rOFDM0_TxCoeff3           		0xcac
+#define rOFDM0_TxCoeff4           		0xcb0
+#define rOFDM0_TxCoeff5           		0xcb4
+#define rOFDM0_TxCoeff6           		0xcb8
+
+
+//page d
+#define rOFDM1_LSTF               		0xd00
+#define rOFDM1_TRxPathEnable      	0xd04
+#define rOFDM1_CFO                		0xd08
+#define rOFDM1_CSI1               		0xd10
+#define rOFDM1_SBD                		0xd14
+#define rOFDM1_CSI2               		0xd18
+#define rOFDM1_CFOTracking        		0xd2c
+#define rOFDM1_TRxMesaure1        	0xd34
+#define rOFDM1_IntfDet            		0xd3c
+#define rOFDM1_PseudoNoiseStateAB 0xd50
+#define rOFDM1_PseudoNoiseStateCD 0xd54
+#define rOFDM1_RxPseudoNoiseWgt   0xd58
+#define rOFDM_PHYCounter1         		0xda0  //cca, parity fail
+#define rOFDM_PHYCounter2         		0xda4  //rate illegal, crc8 fail
+#define rOFDM_PHYCounter3         		0xda8  //MCS not support
+#define rOFDM_ShortCFOAB          		0xdac
+#define rOFDM_ShortCFOCD          		0xdb0
+#define rOFDM_LongCFOAB           		0xdb4
+#define rOFDM_LongCFOCD           		0xdb8
+#define rOFDM_TailCFOAB           		0xdbc
+#define rOFDM_TailCFOCD           		0xdc0
+#define rOFDM_PWMeasure1          	0xdc4
+#define rOFDM_PWMeasure2          	0xdc8
+#define rOFDM_BWReport            		0xdcc
+#define rOFDM_AGCReport           		0xdd0
+#define rOFDM_RxSNR               		0xdd4
+#define rOFDM_RxEVMCSI            		0xdd8
+#define rOFDM_SIGReport           		0xddc
+
+//page e
+#define rTxAGC_Rate18_06			0xe00
+#define rTxAGC_Rate54_24			0xe04
+#define rTxAGC_CCK_Mcs32			0xe08
+#define rTxAGC_Mcs03_Mcs00			0xe10
+#define rTxAGC_Mcs07_Mcs04			0xe14
+#define rTxAGC_Mcs11_Mcs08			0xe18
+#define rTxAGC_Mcs15_Mcs12			0xe1c
+
+
+//RF
+//Zebra1
+#define rZebra1_HSSIEnable            	0x0
+#define rZebra1_TRxEnable1            	0x1
+#define rZebra1_TRxEnable2           	0x2
+#define rZebra1_AGC                   		0x4
+#define rZebra1_ChargePump            	0x5
+#define rZebra1_Channel               		0x7
+#define rZebra1_TxGain               	 	0x8
+#define rZebra1_TxLPF                 		0x9
+#define rZebra1_RxLPF                 		0xb
+#define rZebra1_RxHPFCorner           	0xc
+
+//Zebra4
+#define rGlobalCtrl                   		0
+#define rRTL8256_TxLPF                		19
+#define rRTL8256_RxLPF                		11
+
+//RTL8258
+#define rRTL8258_TxLPF                		0x11
+#define rRTL8258_RxLPF                		0x13
+#define rRTL8258_RSSILPF              	0xa
+
+//Bit Mask
+//page-1
+#define bBBResetB                 			0x100
+#define bGlobalResetB             		0x200
+#define bOFDMTxStart              		0x4
+#define bCCKTxStart               			0x8
+#define bCRC32Debug               		0x100
+#define bPMACLoopback             		0x10
+#define bTxLSIG                   			0xffffff
+#define bOFDMTxRate               		0xf
+#define bOFDMTxReserved           		0x10
+#define bOFDMTxLength             		0x1ffe0
+#define bOFDMTxParity             		0x20000
+#define bTxHTSIG1                 			0xffffff
+#define bTxHTMCSRate              		0x7f
+#define bTxHTBW                   			0x80
+#define bTxHTLength               		0xffff00
+#define bTxHTSIG2                 			0xffffff
+#define bTxHTSmoothing            		0x1
+#define bTxHTSounding             		0x2
+#define bTxHTReserved             		0x4
+#define bTxHTAggreation           		0x8
+#define bTxHTSTBC                 			0x30
+#define bTxHTAdvanceCoding        		0x40
+#define bTxHTShortGI              		0x80
+#define bTxHTNumberHT_LTF         		0x300
+#define bTxHTCRC8                 			0x3fc00
+#define bCounterReset             		0x10000
+#define bNumOfOFDMTx              		0xffff
+#define bNumOfCCKTx               		0xffff0000
+#define bTxIdleInterval           			0xffff
+#define bOFDMService              		0xffff0000
+#define bTxMACHeader              		0xffffffff
+#define bTxDataInit               			0xff
+#define bTxHTMode                 		0x100
+#define bTxDataType               		0x30000
+#define bTxRandomSeed             		0xffffffff
+#define bCCKTxPreamble           		0x1
+#define bCCKTxSFD                 			0xffff0000
+#define bCCKTxSIG                 			0xff
+#define bCCKTxService             		0xff00
+#define bCCKLengthExt             		0x8000
+#define bCCKTxLength              		0xffff0000
+#define bCCKTxCRC16               		0xffff
+#define bCCKTxStatus              		0x1
+#define bOFDMTxStatus             		0x2
+
+//page-8
+#define bRFMOD                    			0x1
+#define bJapanMode                		0x2
+#define bCCKTxSC                  			0x30
+#define bCCKEn                    			0x1000000
+#define bOFDMEn                   			0x2000000
+#define bOFDMRxADCPhase           		0x10000
+#define bOFDMTxDACPhase           		0x40000
+#define bXATxAGC                  			0x3f
+#define bXBTxAGC                  			0xf00
+#define bXCTxAGC                  			0xf000
+#define bXDTxAGC                  			0xf0000
+#define bPAStart                  			0xf0000000
+#define bTRStart                  			0x00f00000
+#define bRFStart                  			0x0000f000
+#define bBBStart                  			0x000000f0
+#define bBBCCKStart               		0x0000000f
+#define bPAEnd                    			0xf          //Reg0x814
+#define bTREnd                    			0x0f000000
+#define bRFEnd                    			0x000f0000
+#define bCCAMask                  			0x000000f0   //T2R
+#define bR2RCCAMask               		0x00000f00
+#define bHSSI_R2TDelay            		0xf8000000
+#define bHSSI_T2RDelay            		0xf80000
+#define bContTxHSSI               		0x400     //chane gain at continue Tx
+#define bIGFromCCK                		0x200
+#define bAGCAddress               		0x3f
+#define bRxHPTx                   			0x7000
+#define bRxHPT2R                  			0x38000
+#define bRxHPCCKIni               		0xc0000
+#define bAGCTxCode                		0xc00000
+#define bAGCRxCode                		0x300000
+#define b3WireDataLength          		0x800
+#define b3WireAddressLength       		0x400
+#define b3WireRFPowerDown         		0x1
+//#define bHWSISelect               		0x8
+#define b5GPAPEPolarity           		0x40000000
+#define b2GPAPEPolarity           		0x80000000
+#define bRFSW_TxDefaultAnt        		0x3
+#define bRFSW_TxOptionAnt         		0x30
+#define bRFSW_RxDefaultAnt        		0x300
+#define bRFSW_RxOptionAnt         		0x3000
+#define bRFSI_3WireData           		0x1
+#define bRFSI_3WireClock          		0x2
+#define bRFSI_3WireLoad           		0x4
+#define bRFSI_3WireRW             		0x8
+#define bRFSI_3Wire               			0xf  //3-wire total control
+#define bRFSI_RFENV               		0x10
+#define bRFSI_TRSW                		0x20
+#define bRFSI_TRSWB               		0x40
+#define bRFSI_ANTSW               		0x100
+#define bRFSI_ANTSWB              		0x200
+#define bRFSI_PAPE                			0x400
+#define bRFSI_PAPE5G              		0x800
+#define bBandSelect               			0x1
+#define bHTSIG2_GI                			0x80
+#define bHTSIG2_Smoothing         		0x01
+#define bHTSIG2_Sounding          		0x02
+#define bHTSIG2_Aggreaton         		0x08
+#define bHTSIG2_STBC              		0x30
+#define bHTSIG2_AdvCoding         		0x40
+#define bHTSIG2_NumOfHTLTF        	0x300
+#define bHTSIG2_CRC8              		0x3fc
+#define bHTSIG1_MCS               		0x7f
+#define bHTSIG1_BandWidth         		0x80
+#define bHTSIG1_HTLength          		0xffff
+#define bLSIG_Rate                			0xf
+#define bLSIG_Reserved            		0x10
+#define bLSIG_Length              		0x1fffe
+#define bLSIG_Parity              			0x20
+#define bCCKRxPhase               		0x4
+#define bLSSIReadAddress          		0x3f000000   //LSSI "Read" Address
+#define bLSSIReadEdge             		0x80000000   //LSSI "Read" edge signal
+#define bLSSIReadBackData         		0xfff
+#define bLSSIReadOKFlag           		0x1000
+#define bCCKSampleRate            		0x8       //0: 44MHz, 1:88MHz
+
+#define bRegulator0Standby        		0x1
+#define bRegulatorPLLStandby      		0x2
+#define bRegulator1Standby        		0x4
+#define bPLLPowerUp               		0x8
+#define bDPLLPowerUp              		0x10
+#define bDA10PowerUp              		0x20
+#define bAD7PowerUp               		0x200
+#define bDA6PowerUp               		0x2000
+#define bXtalPowerUp              		0x4000
+#define b40MDClkPowerUP           		0x8000
+#define bDA6DebugMode             		0x20000
+#define bDA6Swing                 			0x380000
+#define bADClkPhase               		0x4000000
+#define b80MClkDelay              		0x18000000
+#define bAFEWatchDogEnable        		0x20000000
+#define bXtalCap                			0x0f000000
+#define bIntDifClkEnable          		0x400
+#define bExtSigClkEnable         	 	0x800
+#define bBandgapMbiasPowerUp      	0x10000
+#define bAD11SHGain               		0xc0000
+#define bAD11InputRange           		0x700000
+#define bAD11OPCurrent            		0x3800000
+#define bIPathLoopback            		0x4000000
+#define bQPathLoopback            		0x8000000
+#define bAFELoopback              		0x10000000
+#define bDA10Swing                		0x7e0
+#define bDA10Reverse              		0x800
+#define bDAClkSource              		0x1000
+#define bAD7InputRange            		0x6000
+#define bAD7Gain                  			0x38000
+#define bAD7OutputCMMode          		0x40000
+#define bAD7InputCMMode           		0x380000
+#define bAD7Current               			0xc00000
+#define bRegulatorAdjust          		0x7000000
+#define bAD11PowerUpAtTx          		0x1
+#define bDA10PSAtTx               		0x10
+#define bAD11PowerUpAtRx          		0x100
+#define bDA10PSAtRx               		0x1000
+
+#define bCCKRxAGCFormat           		0x200
+
+#define bPSDFFTSamplepPoint       		0xc000
+#define bPSDAverageNum            		0x3000
+#define bIQPathControl            		0xc00
+#define bPSDFreq                  			0x3ff
+#define bPSDAntennaPath           		0x30
+#define bPSDIQSwitch              		0x40
+#define bPSDRxTrigger             		0x400000
+#define bPSDTxTrigger             		0x80000000
+#define bPSDSineToneScale        		0x7f000000
+#define bPSDReport                			0xffff
+
+//page-9
+#define bOFDMTxSC                 		0x30000000
+#define bCCKTxOn                  			0x1
+#define bOFDMTxOn                 		0x2
+#define bDebugPage                		0xfff  //reset debug page and also HWord, LWord
+#define bDebugItem                		0xff   //reset debug page and LWord
+#define bAntL              	       		0x10
+#define bAntNonHT           	      			0x100
+#define bAntHT1               			0x1000
+#define bAntHT2                   			0x10000
+#define bAntHT1S1                 			0x100000
+#define bAntNonHTS1               		0x1000000
+
+//page-a
+#define bCCKBBMode                		0x3
+#define bCCKTxPowerSaving         		0x80
+#define bCCKRxPowerSaving         		0x40
+#define bCCKSideBand              		0x10
+#define bCCKScramble              		0x8
+#define bCCKAntDiversity    		      	0x8000
+#define bCCKCarrierRecovery   	    	0x4000
+#define bCCKTxRate           		     	0x3000
+#define bCCKDCCancel             	 	0x0800
+#define bCCKISICancel             		0x0400
+#define bCCKMatchFilter           		0x0200
+#define bCCKEqualizer             		0x0100
+#define bCCKPreambleDetect       	 	0x800000
+#define bCCKFastFalseCCA          		0x400000
+#define bCCKChEstStart            		0x300000
+#define bCCKCCACount              		0x080000
+#define bCCKcs_lim                			0x070000
+#define bCCKBistMode              		0x80000000
+#define bCCKCCAMask             	  	0x40000000
+#define bCCKTxDACPhase         	   	0x4
+#define bCCKRxADCPhase         	   	0x20000000   //r_rx_clk
+#define bCCKr_cp_mode0         	   	0x0100
+#define bCCKTxDCOffset           	 	0xf0
+#define bCCKRxDCOffset           	 	0xf
+#define bCCKCCAMode              	 	0xc000
+#define bCCKFalseCS_lim           		0x3f00
+#define bCCKCS_ratio              		0xc00000
+#define bCCKCorgBit_sel           		0x300000
+#define bCCKPD_lim                			0x0f0000
+#define bCCKNewCCA                		0x80000000
+#define bCCKRxHPofIG              		0x8000
+#define bCCKRxIG                  			0x7f00
+#define bCCKLNAPolarity           		0x800000
+#define bCCKRx1stGain             		0x7f0000
+#define bCCKRFExtend              		0x20000000 //CCK Rx Iinital gain polarity
+#define bCCKRxAGCSatLevel        	 	0x1f000000
+#define bCCKRxAGCSatCount       	  	0xe0
+#define bCCKRxRFSettle            		0x1f       //AGCsamp_dly
+#define bCCKFixedRxAGC           	 	0x8000
+//#define bCCKRxAGCFormat         	 	0x4000   //remove to HSSI register 0x824
+#define bCCKAntennaPolarity      	 	0x2000
+#define bCCKTxFilterType          		0x0c00
+#define bCCKRxAGCReportType   	   	0x0300
+#define bCCKRxDAGCEn              		0x80000000
+#define bCCKRxDAGCPeriod        	  	0x20000000
+#define bCCKRxDAGCSatLevel     	   	0x1f000000
+#define bCCKTimingRecovery       	 	0x800000
+#define bCCKTxC0                  			0x3f0000
+#define bCCKTxC1                  			0x3f000000
+#define bCCKTxC2                  			0x3f
+#define bCCKTxC3                  			0x3f00
+#define bCCKTxC4                  			0x3f0000
+#define bCCKTxC5                  			0x3f000000
+#define bCCKTxC6                  			0x3f
+#define bCCKTxC7                  			0x3f00
+#define bCCKDebugPort             		0xff0000
+#define bCCKDACDebug              		0x0f000000
+#define bCCKFalseAlarmEnable      		0x8000
+#define bCCKFalseAlarmRead        		0x4000
+#define bCCKTRSSI                 			0x7f
+#define bCCKRxAGCReport           		0xfe
+#define bCCKRxReport_AntSel       		0x80000000
+#define bCCKRxReport_MFOff        		0x40000000
+#define bCCKRxRxReport_SQLoss     	0x20000000
+#define bCCKRxReport_Pktloss      		0x10000000
+#define bCCKRxReport_Lockedbit    	0x08000000
+#define bCCKRxReport_RateError    	0x04000000
+#define bCCKRxReport_RxRate       		0x03000000
+#define bCCKRxFACounterLower      	0xff
+#define bCCKRxFACounterUpper      	0xff000000
+#define bCCKRxHPAGCStart          		0xe000
+#define bCCKRxHPAGCFinal          		0x1c00
+
+#define bCCKRxFalseAlarmEnable    	0x8000
+#define bCCKFACounterFreeze       		0x4000
+
+#define bCCKTxPathSel             		0x10000000
+#define bCCKDefaultRxPath         		0xc000000
+#define bCCKOptionRxPath          		0x3000000
+
+//page c
+#define bNumOfSTF                			0x3
+#define bShift_L                 			0xc0
+#define bGI_TH                   			0xc
+#define bRxPathA                 			0x1
+#define bRxPathB                 			0x2
+#define bRxPathC                 			0x4
+#define bRxPathD                 			0x8
+#define bTxPathA                 			0x1
+#define bTxPathB                 			0x2
+#define bTxPathC                 			0x4
+#define bTxPathD                 			0x8
+#define bTRSSIFreq               			0x200
+#define bADCBackoff              			0x3000
+#define bDFIRBackoff             			0xc000
+#define bTRSSILatchPhase         		0x10000
+#define bRxIDCOffset             			0xff
+#define bRxQDCOffset             			0xff00
+#define bRxDFIRMode              		0x1800000
+#define bRxDCNFType              		0xe000000
+#define bRXIQImb_A               			0x3ff
+#define bRXIQImb_B               			0xfc00
+#define bRXIQImb_C               			0x3f0000
+#define bRXIQImb_D               			0xffc00000
+#define bDC_dc_Notch             		0x60000
+#define bRxNBINotch              			0x1f000000
+#define bPD_TH                   			0xf
+#define bPD_TH_Opt2              		0xc000
+#define bPWED_TH                 			0x700
+#define bIfMF_Win_L              			0x800
+#define bPD_Option               			0x1000
+#define bMF_Win_L                			0xe000
+#define bBW_Search_L             		0x30000
+#define bwin_enh_L               			0xc0000
+#define bBW_TH                   			0x700000
+#define bED_TH2                  			0x3800000
+#define bBW_option               			0x4000000
+#define bRatio_TH                			0x18000000
+#define bWindow_L                			0xe0000000
+#define bSBD_Option              			0x1
+#define bFrame_TH                			0x1c
+#define bFS_Option               			0x60
+#define bDC_Slope_check          		0x80
+#define bFGuard_Counter_DC_L     		0xe00
+#define bFrame_Weight_Short      		0x7000
+#define bSub_Tune                			0xe00000
+#define bFrame_DC_Length         		0xe000000
+#define bSBD_start_offset        		0x30000000
+#define bFrame_TH_2              		0x7
+#define bFrame_GI2_TH            		0x38
+#define bGI2_Sync_en             		0x40
+#define bSarch_Short_Early       		0x300
+#define bSarch_Short_Late        		0xc00
+#define bSarch_GI2_Late          		0x70000
+#define bCFOAntSum               		0x1
+#define bCFOAcc                  			0x2
+#define bCFOStartOffset          		0xc
+#define bCFOLookBack             		0x70
+#define bCFOSumWeight            		0x80
+#define bDAGCEnable              			0x10000
+#define bTXIQImb_A               			0x3ff
+#define bTXIQImb_B               			0xfc00
+#define bTXIQImb_C               			0x3f0000
+#define bTXIQImb_D               			0xffc00000
+#define bTxIDCOffset             			0xff
+#define bTxQDCOffset             			0xff00
+#define bTxDFIRMode              		0x10000
+#define bTxPesudoNoiseOn         		0x4000000
+#define bTxPesudoNoise_A         		0xff
+#define bTxPesudoNoise_B         		0xff00
+#define bTxPesudoNoise_C         		0xff0000
+#define bTxPesudoNoise_D         		0xff000000
+#define bCCADropOption           		0x20000
+#define bCCADropThres            		0xfff00000
+#define bEDCCA_H                 			0xf
+#define bEDCCA_L                 			0xf0
+#define bLambda_ED               0x300
+#define bRxInitialGain           0x7f
+#define bRxAntDivEn              0x80
+#define bRxAGCAddressForLNA      0x7f00
+#define bRxHighPowerFlow         0x8000
+#define bRxAGCFreezeThres        0xc0000
+#define bRxFreezeStep_AGC1       0x300000
+#define bRxFreezeStep_AGC2       0xc00000
+#define bRxFreezeStep_AGC3       0x3000000
+#define bRxFreezeStep_AGC0       0xc000000
+#define bRxRssi_Cmp_En           0x10000000
+#define bRxQuickAGCEn            0x20000000
+#define bRxAGCFreezeThresMode    0x40000000
+#define bRxOverFlowCheckType     0x80000000
+#define bRxAGCShift              0x7f
+#define bTRSW_Tri_Only           0x80
+#define bPowerThres              0x300
+#define bRxAGCEn                 0x1
+#define bRxAGCTogetherEn         0x2
+#define bRxAGCMin                0x4
+#define bRxHP_Ini                0x7
+#define bRxHP_TRLNA              0x70
+#define bRxHP_RSSI               0x700
+#define bRxHP_BBP1               0x7000
+#define bRxHP_BBP2               0x70000
+#define bRxHP_BBP3               0x700000
+#define bRSSI_H                  0x7f0000     //the threshold for high power
+#define bRSSI_Gen                0x7f000000   //the threshold for ant diversity
+#define bRxSettle_TRSW           0x7
+#define bRxSettle_LNA            0x38
+#define bRxSettle_RSSI           0x1c0
+#define bRxSettle_BBP            0xe00
+#define bRxSettle_RxHP           0x7000
+#define bRxSettle_AntSW_RSSI     0x38000
+#define bRxSettle_AntSW          0xc0000
+#define bRxProcessTime_DAGC      0x300000
+#define bRxSettle_HSSI           0x400000
+#define bRxProcessTime_BBPPW     0x800000
+#define bRxAntennaPowerShift     0x3000000
+#define bRSSITableSelect         0xc000000
+#define bRxHP_Final              0x7000000
+#define bRxHTSettle_BBP          0x7
+#define bRxHTSettle_HSSI         0x8
+#define bRxHTSettle_RxHP         0x70
+#define bRxHTSettle_BBPPW        0x80
+#define bRxHTSettle_Idle         0x300
+#define bRxHTSettle_Reserved     0x1c00
+#define bRxHTRxHPEn              0x8000
+#define bRxHTAGCFreezeThres      0x30000
+#define bRxHTAGCTogetherEn       0x40000
+#define bRxHTAGCMin              0x80000
+#define bRxHTAGCEn               0x100000
+#define bRxHTDAGCEn              0x200000
+#define bRxHTRxHP_BBP            0x1c00000
+#define bRxHTRxHP_Final          0xe0000000
+#define bRxPWRatioTH             0x3
+#define bRxPWRatioEn             0x4
+#define bRxMFHold                0x3800
+#define bRxPD_Delay_TH1          0x38
+#define bRxPD_Delay_TH2          0x1c0
+#define bRxPD_DC_COUNT_MAX       0x600
+//#define bRxMF_Hold               0x3800
+#define bRxPD_Delay_TH           0x8000
+#define bRxProcess_Delay         0xf0000
+#define bRxSearchrange_GI2_Early 0x700000
+#define bRxFrame_Guard_Counter_L 0x3800000
+#define bRxSGI_Guard_L           0xc000000
+#define bRxSGI_Search_L          0x30000000
+#define bRxSGI_TH                0xc0000000
+#define bDFSCnt0                 0xff
+#define bDFSCnt1                 0xff00
+#define bDFSFlag                 0xf0000
+
+#define bMFWeightSum             0x300000
+#define bMinIdxTH                0x7f000000
+
+#define bDAFormat                0x40000
+
+#define bTxChEmuEnable           0x01000000
+
+#define bTRSWIsolation_A         0x7f
+#define bTRSWIsolation_B         0x7f00
+#define bTRSWIsolation_C         0x7f0000
+#define bTRSWIsolation_D         0x7f000000
+
+#define bExtLNAGain              0x7c00
+
+//page d
+#define bSTBCEn                  0x4
+#define bAntennaMapping          0x10
+#define bNss                     0x20
+#define bCFOAntSumD              0x200
+#define bPHYCounterReset         0x8000000
+#define bCFOReportGet            0x4000000
+#define bOFDMContinueTx          0x10000000
+#define bOFDMSingleCarrier       0x20000000
+#define bOFDMSingleTone          0x40000000
+//#define bRxPath1                 0x01
+//#define bRxPath2                 0x02
+//#define bRxPath3                 0x04
+//#define bRxPath4                 0x08
+//#define bTxPath1                 0x10
+//#define bTxPath2                 0x20
+#define bHTDetect                0x100
+#define bCFOEn                   0x10000
+#define bCFOValue                0xfff00000
+#define bSigTone_Re              0x3f
+#define bSigTone_Im              0x7f00
+#define bCounter_CCA             0xffff
+#define bCounter_ParityFail      0xffff0000
+#define bCounter_RateIllegal     0xffff
+#define bCounter_CRC8Fail        0xffff0000
+#define bCounter_MCSNoSupport    0xffff
+#define bCounter_FastSync        0xffff
+#define bShortCFO                0xfff
+#define bShortCFOTLength         12   //total
+#define bShortCFOFLength         11   //fraction
+#define bLongCFO                 0x7ff
+#define bLongCFOTLength          11
+#define bLongCFOFLength          11
+#define bTailCFO                 0x1fff
+#define bTailCFOTLength          13
+#define bTailCFOFLength          12
+
+#define bmax_en_pwdB             0xffff
+#define bCC_power_dB             0xffff0000
+#define bnoise_pwdB              0xffff
+#define bPowerMeasTLength        10
+#define bPowerMeasFLength        3
+#define bRx_HT_BW                0x1
+#define bRxSC                    0x6
+#define bRx_HT                   0x8
+
+#define bNB_intf_det_on          0x1
+#define bIntf_win_len_cfg        0x30
+#define bNB_Intf_TH_cfg          0x1c0
+
+#define bRFGain                  0x3f
+#define bTableSel                0x40
+#define bTRSW                    0x80
+
+#define bRxSNR_A                 0xff
+#define bRxSNR_B                 0xff00
+#define bRxSNR_C                 0xff0000
+#define bRxSNR_D                 0xff000000
+#define bSNREVMTLength           8
+#define bSNREVMFLength           1
+
+#define bCSI1st                  0xff
+#define bCSI2nd                  0xff00
+#define bRxEVM1st                0xff0000
+#define bRxEVM2nd                0xff000000
+
+#define bSIGEVM                  0xff
+#define bPWDB                    0xff00
+#define bSGIEN                   0x10000
+
+#define bSFactorQAM1             0xf
+#define bSFactorQAM2             0xf0
+#define bSFactorQAM3             0xf00
+#define bSFactorQAM4             0xf000
+#define bSFactorQAM5             0xf0000
+#define bSFactorQAM6             0xf0000
+#define bSFactorQAM7             0xf00000
+#define bSFactorQAM8             0xf000000
+#define bSFactorQAM9             0xf0000000
+#define bCSIScheme               0x100000
+
+#define bNoiseLvlTopSet          0x3
+#define bChSmooth                0x4
+#define bChSmoothCfg1            0x38
+#define bChSmoothCfg2            0x1c0
+#define bChSmoothCfg3            0xe00
+#define bChSmoothCfg4            0x7000
+#define bMRCMode                 0x800000
+#define bTHEVMCfg                0x7000000
+
+#define bLoopFitType             0x1
+#define bUpdCFO                  0x40
+#define bUpdCFOOffData           0x80
+#define bAdvUpdCFO               0x100
+#define bAdvTimeCtrl             0x800
+#define bUpdClko                 0x1000
+#define bFC                      0x6000
+#define bTrackingMode            0x8000
+#define bPhCmpEnable             0x10000
+#define bUpdClkoLTF              0x20000
+#define bComChCFO                0x40000
+#define bCSIEstiMode             0x80000
+#define bAdvUpdEqz               0x100000
+#define bUChCfg                  0x7000000
+#define bUpdEqz                  0x8000000
+
+//page e
+#define bTxAGCRate18_06			0x7f7f7f7f
+#define bTxAGCRate54_24			0x7f7f7f7f
+#define bTxAGCRateMCS32		0x7f
+#define bTxAGCRateCCK			0x7f00
+#define bTxAGCRateMCS3_MCS0	0x7f7f7f7f
+#define bTxAGCRateMCS7_MCS4	0x7f7f7f7f
+#define bTxAGCRateMCS11_MCS8	0x7f7f7f7f
+#define bTxAGCRateMCS15_MCS12	0x7f7f7f7f
+
+
+//Rx Pseduo noise
+#define bRxPesudoNoiseOn         0x20000000
+#define bRxPesudoNoise_A         0xff
+#define bRxPesudoNoise_B         0xff00
+#define bRxPesudoNoise_C         0xff0000
+#define bRxPesudoNoise_D         0xff000000
+#define bPesudoNoiseState_A      0xffff
+#define bPesudoNoiseState_B      0xffff0000
+#define bPesudoNoiseState_C      0xffff
+#define bPesudoNoiseState_D      0xffff0000
+
+//RF
+//Zebra1
+#define bZebra1_HSSIEnable        0x8
+#define bZebra1_TRxControl        0xc00
+#define bZebra1_TRxGainSetting    0x07f
+#define bZebra1_RxCorner          0xc00
+#define bZebra1_TxChargePump      0x38
+#define bZebra1_RxChargePump      0x7
+#define bZebra1_ChannelNum        0xf80
+#define bZebra1_TxLPFBW           0x400
+#define bZebra1_RxLPFBW           0x600
+
+//Zebra4
+#define bRTL8256RegModeCtrl1      0x100
+#define bRTL8256RegModeCtrl0      0x40
+#define bRTL8256_TxLPFBW          0x18
+#define bRTL8256_RxLPFBW          0x600
+
+//RTL8258
+#define bRTL8258_TxLPFBW          0xc
+#define bRTL8258_RxLPFBW          0xc00
+#define bRTL8258_RSSILPFBW        0xc0
+
+//byte endable for sb_write
+#define bByte0                    0x1
+#define bByte1                    0x2
+#define bByte2                    0x4
+#define bByte3                    0x8
+#define bWord0                    0x3
+#define bWord1                    0xc
+#define bDWord                    0xf
+
+//for PutRegsetting & GetRegSetting BitMask
+#define bMaskByte0                0xff
+#define bMaskByte1                0xff00
+#define bMaskByte2                0xff0000
+#define bMaskByte3                0xff000000
+#define bMaskHWord                0xffff0000
+#define bMaskLWord                0x0000ffff
+#define bMaskDWord                0xffffffff
+
+//for PutRFRegsetting & GetRFRegSetting BitMask
+#define bMask12Bits               0xfff
+
+#define bEnable                   0x1
+#define bDisable                  0x0
+
+#define LeftAntenna               0x0
+#define RightAntenna              0x1
+
+#define tCheckTxStatus            500   //500ms
+#define tUpdateRxCounter          100   //100ms
+
+#define rateCCK     0
+#define rateOFDM    1
+#define rateHT      2
+
+//define Register-End
+#define bPMAC_End                 0x1ff
+#define bFPGAPHY0_End             0x8ff
+#define bFPGAPHY1_End             0x9ff
+#define bCCKPHY0_End              0xaff
+#define bOFDMPHY0_End             0xcff
+#define bOFDMPHY1_End             0xdff
+
+//define max debug item in each debug page
+//#define bMaxItem_FPGA_PHY0        0x9
+//#define bMaxItem_FPGA_PHY1        0x3
+//#define bMaxItem_PHY_11B          0x16
+//#define bMaxItem_OFDM_PHY0        0x29
+//#define bMaxItem_OFDM_PHY1        0x0
+
+#define bPMACControl              0x0
+#define bWMACControl              0x1
+#define bWNICControl              0x2
+
+#define PathA                     0x0
+#define PathB                     0x1
+#define PathC                     0x2
+#define PathD                     0x3
+
+#define	rRTL8256RxMixerPole		0xb
+#define 	bZebraRxMixerPole		0x6
+#define 	rRTL8256TxBBOPBias        0x9
+#define 	bRTL8256TxBBOPBias       0x400
+#define 	rRTL8256TxBBBW             19
+#define 	bRTL8256TxBBBW            	0x18
+
+#endif	//__INC_HAL8190PCIPHYREG_H
diff --git a/drivers/staging/serqt_usb/Makefile b/drivers/staging/serqt_usb/Makefile
deleted file mode 100644
index 4fd1da275e8..00000000000
--- a/drivers/staging/serqt_usb/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_USB_SERIAL_QUATECH_ESU100)		+= serqt_usb.o
diff --git a/drivers/staging/serqt_usb/serqt_usb.c b/drivers/staging/serqt_usb/serqt_usb.c
deleted file mode 100644
index 234f332fc82..00000000000
--- a/drivers/staging/serqt_usb/serqt_usb.c
+++ /dev/null
@@ -1,2656 +0,0 @@
-/*
- * This code was developed for the Quatech USB line for linux, it used
- * much of the code developed by Greg Kroah-Hartman for USB serial devices
- *
- */
-
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-#include <linux/wait.h>
-#include <linux/types.h>
-#include <linux/version.h>
-#include <linux/uaccess.h>
-
-/* Use our own dbg macro */
-/* #define DEBUG_ON */
-/* #undef dbg */
-#ifdef DEBUG_ON
-#define  mydbg(const...)    printk(const)
-#else
-#define  mydbg(const...)
-#endif
-
-/* parity check flag */
-#define RELEVANT_IFLAG(iflag)	(iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
-
-#define SERIAL_TTY_MAJOR	        0	/* Nice legal number now */
-#define SERIAL_TTY_MINORS	        255	/* loads of devices :) */
-#define MAX_NUM_PORTS		        8	/* The maximum number of ports one device can grab at once */
-#define PREFUFF_LEVEL_CONSERVATIVE  128
-#define ATC_DISABLED                0x00
-
-#define RR_BITS             0x03	/* for clearing clock bits */
-#define DUPMODE_BITS        0xc0
-
-#define RS232_MODE          0x00
-#define RTSCTS_TO_CONNECTOR 0x40
-#define CLKS_X4             0x02
-
-#define LOOPMODE_BITS       0x41	/* LOOP1 = b6, LOOP0 = b0 (PORT B) */
-#define ALL_LOOPBACK        0x01
-#define MODEM_CTRL          0x40
-
-#define THISCHAR                    data[i]
-#define NEXTCHAR                    data[i + 1]
-#define THIRDCHAR                  data[i + 2]
-#define FOURTHCHAR                  data[i + 3]
-
-/*
- * Useful defintions for port A, Port B and Port C
- */
-#define FULLPWRBIT          0x00000080
-#define NEXT_BOARD_POWER_BIT        0x00000004
-
-#define SERIAL_LSR_OE       0x02
-#define SERIAL_LSR_PE       0x04
-#define SERIAL_LSR_FE       0x08
-#define SERIAL_LSR_BI       0x10
-
-#define SERIAL_LSR_TEMT     0x40
-
-#define  DIV_LATCH_LS               0x00
-#define  XMT_HOLD_REGISTER          0x00
-#define  XVR_BUFFER_REGISTER        0x00
-#define  DIV_LATCH_MS               0x01
-#define  FIFO_CONTROL_REGISTER      0x02
-#define  LINE_CONTROL_REGISTER      0x03
-#define  MODEM_CONTROL_REGISTER     0x04
-#define  LINE_STATUS_REGISTER       0x05
-#define  MODEM_STATUS_REGISTER      0x06
-
-#define  SERIAL_MCR_DTR             0x01
-#define  SERIAL_MCR_RTS             0x02
-#define  SERIAL_MCR_LOOP            0x10
-
-#define  SERIAL_MSR_CTS             0x10
-#define  SERIAL_MSR_CD              0x80
-#define  SERIAL_MSR_RI              0x40
-#define  SERIAL_MSR_DSR             0x20
-#define  SERIAL_MSR_MASK            0xf0
-
-#define  SERIAL_8_DATA              0x03
-#define  SERIAL_7_DATA              0x02
-#define  SERIAL_6_DATA              0x01
-#define  SERIAL_5_DATA              0x00
-
-#define  SERIAL_ODD_PARITY          0X08
-#define  SERIAL_EVEN_PARITY         0X18
-#define  SERIAL_TWO_STOPB           0x04
-#define  SERIAL_ONE_STOPB           0x00
-
-#define  MAX_BAUD_RATE              460800
-#define  MAX_BAUD_REMAINDER         4608
-
-#define QT_SET_GET_DEVICE           0xc2
-#define QT_OPEN_CLOSE_CHANNEL       0xca
-#define QT_GET_SET_PREBUF_TRIG_LVL  0xcc
-#define QT_SET_ATF                  0xcd
-#define QT_GET_SET_REGISTER         0xc0
-#define QT_GET_SET_UART             0xc1
-#define QT_HW_FLOW_CONTROL_MASK     0xc5
-#define QT_SW_FLOW_CONTROL_MASK     0xc6
-#define QT_SW_FLOW_CONTROL_DISABLE  0xc7
-#define QT_BREAK_CONTROL            0xc8
-
-#define SERIALQT_PCI_IOC_MAGIC 'k'
-#define SERIALQT_WRITE_QOPR _IOW(SERIALQT_PCI_IOC_MAGIC, 0, int)
-#define SERIALQT_WRITE_QMCR _IOW(SERIALQT_PCI_IOC_MAGIC, 1, int)
-#define SERIALQT_GET_NUMOF_UNITS _IOR(SERIALQT_PCI_IOC_MAGIC, 2, void *)
-#define SERIALQT_GET_THIS_UNIT _IOR(SERIALQT_PCI_IOC_MAGIC, 3, void *)
-#define SERIALQT_READ_QOPR _IOR(SERIALQT_PCI_IOC_MAGIC, 4, int)
-#define SERIALQT_READ_QMCR _IOR(SERIALQT_PCI_IOC_MAGIC, 5, int)
-#define SERIALQT_IS422_EXTENDED _IOR(SERIALQT_PCI_IOC_MAGIC, 6, int)	/* returns successful if 422 extended */
-
-#define USBD_TRANSFER_DIRECTION_IN    0xc0
-#define USBD_TRANSFER_DIRECTION_OUT   0x40
-
-#define ATC_DISABLED                0x00
-#define ATC_RTS_ENABLED                 0x02
-#define ATC_DTR_ENABLED                 0x01
-
-#define RR_BITS             0x03	/* for clearing clock bits */
-#define DUPMODE_BITS        0xc0
-
-#define FULL_DUPLEX         0x00
-#define HALF_DUPLEX_RTS     0x40
-#define HALF_DUPLEX_DTR     0x80
-
-#define QMCR_FULL_DUPLEX  0x00
-#define QMCR_HALF_DUPLEX_RTS 0x02
-#define QMCR_HALF_DUPLEX_DTR 0x01
-#define QMCR_HALF_DUPLEX_MASK 0x03
-#define QMCR_CONNECTOR_MASK 0x1C
-
-#define QMCR_RX_EN_MASK 0x20
-
-#define QMCR_ALL_LOOPBACK    0x10
-#define QMCR_MODEM_CONTROL   0X00
-
-#define SERIALQT_IOC_MAXNR 6
-
-struct usb_serial_port {
-	struct usb_serial *serial;	/* pointer back to the owner of this port */
-	struct tty_struct *tty;	/* the coresponding tty for this port */
-	unsigned char number;
-	char active;		/* someone has this device open */
-
-	unsigned char *interrupt_in_buffer;
-	struct urb *interrupt_in_urb;
-	__u8 interrupt_in_endpointAddress;
-
-	unsigned char *bulk_in_buffer;
-	unsigned char *xfer_to_tty_buffer;
-	struct urb *read_urb;
-	__u8 bulk_in_endpointAddress;
-
-	unsigned char *bulk_out_buffer;
-	int bulk_out_size;
-	struct urb *write_urb;
-	__u8 bulk_out_endpointAddress;
-
-	wait_queue_head_t write_wait;
-	wait_queue_head_t wait;
-	struct work_struct work;
-
-	int open_count;		/* number of times this port has been opened */
-	struct semaphore sem;	/* locks this structure */
-
-	__u8 shadowLCR;		/* last LCR value received */
-	__u8 shadowMCR;		/* last MCR value received */
-	__u8 shadowMSR;		/* last MSR value received */
-	__u8 shadowLSR;		/* last LSR value received */
-	int RxHolding;
-	char closePending;
-	int ReadBulkStopped;
-
-	void *private;		/* data private to the specific port */
-};
-
-struct identity {
-	int index;
-	int n_identity;
-};
-
-struct usb_serial {
-	struct usb_device *dev;
-	struct usb_interface *interface;	/* the interface for this device */
-	struct tty_driver *tty_driver;	/* the tty_driver for this device */
-	unsigned char minor;	/* the starting minor number for this device */
-	unsigned char num_ports;	/* the number of ports this device has */
-	char num_interrupt_in;	/* number of interrupt in endpoints we have */
-	char num_bulk_in;	/* number of bulk in endpoints we have */
-	char num_bulk_out;	/* number of bulk out endpoints we have */
-	unsigned char num_OpenCount;	/* the number of ports this device has */
-
-	__u16 vendor;		/* vendor id of this device */
-	__u16 product;		/* product id of this device */
-	struct usb_serial_port port[MAX_NUM_PORTS];
-
-	void *private;		/* data private to the specific driver */
-};
-
-static inline int port_paranoia_check(struct usb_serial_port *port,
-				      const char *function)
-{
-	if (!port) {
-		dbg("%s - port == NULL", function);
-		return -1;
-	}
-	if (!port->serial) {
-		dbg("%s - port->serial == NULL\n", function);
-		return -1;
-	}
-	if (!port->tty) {
-		dbg("%s - port->tty == NULL\n", function);
-		return -1;
-	}
-
-	return 0;
-}
-
-/* Inline functions to check the sanity of a pointer that is passed to us */
-static inline int serial_paranoia_check(struct usb_serial *serial,
-					const char *function)
-{
-	if (!serial) {
-		dbg("%s - serial == NULL\n", function);
-		return -1;
-	}
-
-	return 0;
-}
-
-static inline struct usb_serial *get_usb_serial(struct usb_serial_port *port,
-						const char *function)
-{
-	/* if no port was specified, or it fails a paranoia check */
-	if (!port ||
-	    port_paranoia_check(port, function) ||
-	    serial_paranoia_check(port->serial, function)) {
-		/* then say that we dont have a valid usb_serial thing, which will
-		 * end up genrating -ENODEV return values */
-		return NULL;
-	}
-
-	return port->serial;
-}
-
-struct qt_get_device_data {
-	__u8 porta;
-	__u8 portb;
-	__u8 portc;
-};
-
-struct qt_open_channel_data {
-	__u8 line_status;
-	__u8 modem_status;
-};
-
-static void ProcessLineStatus(struct usb_serial_port *port,
-			      unsigned char line_status);
-static void ProcessModemStatus(struct usb_serial_port *port,
-			       unsigned char modem_status);
-static void ProcessRxChar(struct usb_serial_port *port, unsigned char Data);
-static struct usb_serial *get_free_serial(int num_ports, int *minor);
-
-static int serqt_probe(struct usb_interface *interface,
-		       const struct usb_device_id *id);
-
-static void serqt_usb_disconnect(struct usb_interface *interface);
-static int box_set_device(struct usb_serial *serial,
-			  struct qt_get_device_data *pDeviceData);
-static int box_get_device(struct usb_serial *serial,
-			  struct qt_get_device_data *pDeviceData);
-static int serial_open(struct tty_struct *tty, struct file *filp);
-static void serial_close(struct tty_struct *tty, struct file *filp);
-static int serial_write_room(struct tty_struct *tty);
-static int serial_ioctl(struct tty_struct *tty, struct file *file,
-			unsigned int cmd, unsigned long arg);
-static void serial_set_termios(struct tty_struct *tty, struct ktermios *old);
-static int serial_write(struct tty_struct *tty, const unsigned char *buf,
-			int count);
-
-static void serial_throttle(struct tty_struct *tty);
-static void serial_unthrottle(struct tty_struct *tty);
-static int serial_break(struct tty_struct *tty, int break_state);
-static int serial_chars_in_buffer(struct tty_struct *tty);
-
-static int qt_open(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file *filp);
-static int BoxSetPrebufferLevel(struct usb_serial *serial);
-
-static int BoxSetATC(struct usb_serial *serial, __u16 n_Mode);
-static int BoxSetUart(struct usb_serial *serial, unsigned short Uart_Number,
-		      unsigned short default_divisor,
-		      unsigned char default_LCR);
-
-static int BoxOPenCloseChannel(struct usb_serial *serial, __u16 Uart_Number,
-			       __u16 OpenClose,
-			       struct qt_open_channel_data *pDeviceData);
-static void qt_close(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filp);
-static int BoxGetRegister(struct usb_serial *serial, unsigned short Uart_Number,
-			  unsigned short Register_Num, __u8 *pValue);
-static int BoxSetRegister(struct usb_serial *serial, unsigned short Uart_Number,
-			  unsigned short Register_Num, unsigned short Value);
-static void qt_write_bulk_callback(struct urb *urb);
-static int qt_write(struct tty_struct *tty, struct usb_serial_port *port,
-		    const unsigned char *buf, int count);
-static void port_softint(struct work_struct *work);
-static int qt_write_room(struct usb_serial_port *port);
-static int qt_chars_in_buffer(struct usb_serial_port *port);
-static int qt_ioctl(struct tty_struct *tty, struct usb_serial_port *port,
-		struct file *file, unsigned int cmd, unsigned long arg);
-static void qt_set_termios(struct tty_struct *tty,
-			   struct usb_serial_port *port,
-			   struct ktermios *old_termios);
-static int BoxSetHW_FlowCtrl(struct usb_serial *serial, unsigned int index,
-			     int bSet);
-static int BoxDisable_SW_FlowCtrl(struct usb_serial *serial, __u16 index);
-static int EmulateWriteQMCR_Reg(int index, unsigned uc_value);
-static int EmulateReadQMCR_Reg(int index, unsigned *uc_value);
-static struct usb_serial *find_the_box(unsigned int index);
-static int ioctl_serial_usb(struct inode *innod, struct file *filp, unsigned int cmd,
-		     unsigned long arg);
-
-static int BoxSetSW_FlowCtrl(struct usb_serial *serial, __u16 Uart,
-			     unsigned char stop_char, unsigned char start_char);
-static void qt_read_bulk_callback(struct urb *urb);
-
-static void port_sofrint(void *private);
-
-static void return_serial(struct usb_serial *serial);
-
-static int serial_tiocmset(struct tty_struct *tty, struct file *file,
-			   unsigned int set, unsigned int clear);
-static int serial_tiocmget(struct tty_struct *tty, struct file *file);
-
-static int qt_tiocmset(struct tty_struct *tty, struct usb_serial_port *port,
-		       struct file *file, unsigned int value);
-
-static int qt_tiocmget(struct tty_struct *tty, struct usb_serial_port *port,
-							struct file *file);
-
-/* Version Information */
-#define DRIVER_VERSION "v2.14"
-#define DRIVER_AUTHOR "Tim Gobeli, Quatech, Inc"
-#define DRIVER_DESC "Quatech USB to Serial Driver"
-
-#define	USB_VENDOR_ID_QUATECH			0x061d	/* Quatech VID */
-#define DEVICE_ID_QUATECH_RS232_SINGLE_PORT	0xC020	/* SSU100 */
-#define DEVICE_ID_QUATECH_RS422_SINGLE_PORT	0xC030	/* SSU200 */
-#define DEVICE_ID_QUATECH_RS232_DUAL_PORT	0xC040	/* DSU100 */
-#define DEVICE_ID_QUATECH_RS422_DUAL_PORT	0xC050	/* DSU200 */
-#define DEVICE_ID_QUATECH_RS232_FOUR_PORT	0xC060	/* QSU100 */
-#define DEVICE_ID_QUATECH_RS422_FOUR_PORT	0xC070	/* QSU200 */
-#define DEVICE_ID_QUATECH_RS232_EIGHT_PORT_A	0xC080	/* ESU100A */
-#define DEVICE_ID_QUATECH_RS232_EIGHT_PORT_B	0xC081	/* ESU100B */
-#define DEVICE_ID_QUATECH_RS422_EIGHT_PORT_A	0xC0A0	/* ESU200A */
-#define DEVICE_ID_QUATECH_RS422_EIGHT_PORT_B	0xC0A1	/* ESU200B */
-#define DEVICE_ID_QUATECH_RS232_16_PORT_A	0xC090	/* HSU100A */
-#define DEVICE_ID_QUATECH_RS232_16_PORT_B	0xC091	/* HSU100B */
-#define DEVICE_ID_QUATECH_RS232_16_PORT_C	0xC092	/* HSU100C */
-#define DEVICE_ID_QUATECH_RS232_16_PORT_D	0xC093	/* HSU100D */
-#define DEVICE_ID_QUATECH_RS422_16_PORT_A	0xC0B0	/* HSU200A */
-#define DEVICE_ID_QUATECH_RS422_16_PORT_B	0xC0B1	/* HSU200B */
-#define DEVICE_ID_QUATECH_RS422_16_PORT_C	0xC0B2	/* HSU200C */
-#define DEVICE_ID_QUATECH_RS422_16_PORT_D	0xC0B3	/* HSU200D */
-
-/* table of Quatech devices  */
-static struct usb_device_id serqt_table[] = {
-	{USB_DEVICE
-	 (USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS232_SINGLE_PORT)},
-	{USB_DEVICE
-	 (USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS422_SINGLE_PORT)},
-	{USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS232_DUAL_PORT)},
-	{USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS422_DUAL_PORT)},
-	{USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS232_FOUR_PORT)},
-	{USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS422_FOUR_PORT)},
-	{USB_DEVICE
-	 (USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS232_EIGHT_PORT_A)},
-	{USB_DEVICE
-	 (USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS232_EIGHT_PORT_B)},
-	{USB_DEVICE
-	 (USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS422_EIGHT_PORT_A)},
-	{USB_DEVICE
-	 (USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS422_EIGHT_PORT_B)},
-	{USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS232_16_PORT_A)},
-	{USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS232_16_PORT_B)},
-	{USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS232_16_PORT_C)},
-	{USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS232_16_PORT_D)},
-	{USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS422_16_PORT_A)},
-	{USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS422_16_PORT_B)},
-	{USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS422_16_PORT_C)},
-	{USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS422_16_PORT_D)},
-	{}			/* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE(usb, serqt_table);
-
-static int major_number;
-static struct usb_serial *serial_table[SERIAL_TTY_MINORS];	/* initially all NULL */
-
-/* table of Quatech 422devices  */
-static unsigned int serqt_422_table[] = {
-	DEVICE_ID_QUATECH_RS422_SINGLE_PORT,
-	DEVICE_ID_QUATECH_RS422_DUAL_PORT,
-	DEVICE_ID_QUATECH_RS422_FOUR_PORT,
-	DEVICE_ID_QUATECH_RS422_EIGHT_PORT_A,
-	DEVICE_ID_QUATECH_RS422_EIGHT_PORT_B,
-	DEVICE_ID_QUATECH_RS422_16_PORT_A,
-	DEVICE_ID_QUATECH_RS422_16_PORT_B,
-	DEVICE_ID_QUATECH_RS422_16_PORT_C,
-	DEVICE_ID_QUATECH_RS422_16_PORT_D,
-	0			/* terminate with zero */
-};
-
-/* usb specific object needed to register this driver with the usb subsystem */
-static struct usb_driver serqt_usb_driver = {
-	.name = "quatech-usb-serial",
-	.probe = serqt_probe,
-	.disconnect = serqt_usb_disconnect,
-	.id_table = serqt_table,
-};
-
-static struct ktermios *serial_termios[SERIAL_TTY_MINORS];
-static struct ktermios *serial_termios_locked[SERIAL_TTY_MINORS];
-
-static const struct tty_operations serial_ops = {
-	.open = serial_open,
-	.close = serial_close,
-	.write = serial_write,
-	.write_room = serial_write_room,
-	.ioctl = serial_ioctl,
-	.set_termios = serial_set_termios,
-	.throttle = serial_throttle,
-	.unthrottle = serial_unthrottle,
-	.break_ctl = serial_break,
-	.chars_in_buffer = serial_chars_in_buffer,
-	.tiocmset = serial_tiocmset,
-	.tiocmget = serial_tiocmget,
-};
-
-static struct tty_driver serial_tty_driver = {
-	.magic = TTY_DRIVER_MAGIC,
-	.driver_name = "Quatech usb-serial",
-	.name = "ttyQT_USB",
-	.major = SERIAL_TTY_MAJOR,
-	.minor_start = 0,
-	.num = SERIAL_TTY_MINORS,
-	.type = TTY_DRIVER_TYPE_SERIAL,
-	.subtype = SERIAL_TYPE_NORMAL,
-	.flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV,
-
-	.termios = serial_termios,
-	.termios_locked = serial_termios_locked,
-	.init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL,
-
-	.init_termios.c_iflag = ICRNL | IXON,
-	.init_termios.c_oflag = OPOST,
-
-	.init_termios.c_lflag =
-	    ISIG | ICANON | ECHO | ECHOE | ECHOK | ECHOCTL | ECHOKE | IEXTEN,
-};
-
-/* fops for parent device */
-static const struct file_operations serialqt_usb_fops = {
-	.ioctl = ioctl_serial_usb,
-};
-
- /**
- *	  serqt_probe
- *
- *	Called by the usb core when a new device is connected that it thinks
- *	this driver might be interested in.
- *
- */
-static int serqt_probe(struct usb_interface *interface,
-		       const struct usb_device_id *id)
-{
-	struct usb_device *dev = interface_to_usbdev(interface);
-	struct usb_serial *serial = NULL;
-	struct usb_serial_port *port;
-	struct usb_endpoint_descriptor *endpoint;
-	struct usb_endpoint_descriptor *interrupt_in_endpoint[MAX_NUM_PORTS];
-	struct usb_endpoint_descriptor *bulk_in_endpoint[MAX_NUM_PORTS];
-	struct usb_endpoint_descriptor *bulk_out_endpoint[MAX_NUM_PORTS];
-	int minor;
-	int buffer_size;
-	int i;
-	struct usb_host_interface *iface_desc;
-	int num_interrupt_in = 0;
-	int num_bulk_in = 0;
-	int num_bulk_out = 0;
-	int num_ports;
-	struct qt_get_device_data DeviceData;
-	int status;
-
-	mydbg("In %s\n", __func__);
-
-	/* let's find the endpoints needed */
-	/* check out the endpoints */
-	iface_desc = interface->cur_altsetting;;
-	for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
-		endpoint = &iface_desc->endpoint[i].desc;
-
-		if ((endpoint->bEndpointAddress & 0x80) &&
-		    ((endpoint->bmAttributes & 3) == 0x02)) {
-			/* we found a bulk in endpoint */
-			mydbg("found bulk in");
-			bulk_in_endpoint[num_bulk_in] = endpoint;
-			++num_bulk_in;
-		}
-
-		if (((endpoint->bEndpointAddress & 0x80) == 0x00) &&
-		    ((endpoint->bmAttributes & 3) == 0x02)) {
-			/* we found a bulk out endpoint */
-			mydbg("found bulk out\n");
-			bulk_out_endpoint[num_bulk_out] = endpoint;
-			++num_bulk_out;
-		}
-
-		if ((endpoint->bEndpointAddress & 0x80) &&
-		    ((endpoint->bmAttributes & 3) == 0x03)) {
-			/* we found a interrupt in endpoint */
-			mydbg("found interrupt in\n");
-			interrupt_in_endpoint[num_interrupt_in] = endpoint;
-			++num_interrupt_in;
-		}
-	}
-
-	/* found all that we need */
-	dev_info(&interface->dev, "Quatech converter detected\n");
-	num_ports = num_bulk_out;
-	if (num_ports == 0) {
-		err("Quatech device with no bulk out, not allowed.");
-		return -ENODEV;
-
-	}
-
-	serial = get_free_serial(num_ports, &minor);
-	if (serial == NULL) {
-		err("No more free serial devices");
-		return -ENODEV;
-	}
-
-	serial->dev = dev;
-	serial->interface = interface;
-	serial->minor = minor;
-	serial->num_ports = num_ports;
-	serial->num_bulk_in = num_bulk_in;
-	serial->num_bulk_out = num_bulk_out;
-	serial->num_interrupt_in = num_interrupt_in;
-	serial->vendor = dev->descriptor.idVendor;
-	serial->product = dev->descriptor.idProduct;
-
-	/* set up the endpoint information */
-	for (i = 0; i < num_bulk_in; ++i) {
-		endpoint = bulk_in_endpoint[i];
-		port = &serial->port[i];
-		port->read_urb = usb_alloc_urb(0, GFP_KERNEL);
-		if (!port->read_urb) {
-			err("No free urbs available");
-			goto probe_error;
-		}
-		buffer_size = endpoint->wMaxPacketSize;
-		port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
-		port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
-		port->xfer_to_tty_buffer = kmalloc(buffer_size, GFP_KERNEL);
-		if (!port->bulk_in_buffer) {
-			err("Couldn't allocate bulk_in_buffer");
-			goto probe_error;
-		}
-		usb_fill_bulk_urb(port->read_urb, dev,
-				  usb_rcvbulkpipe(dev,
-						  endpoint->bEndpointAddress),
-				  port->bulk_in_buffer, buffer_size,
-				  qt_read_bulk_callback, port);
-	}
-
-	for (i = 0; i < num_bulk_out; ++i) {
-		endpoint = bulk_out_endpoint[i];
-		port = &serial->port[i];
-		port->write_urb = usb_alloc_urb(0, GFP_KERNEL);
-		if (!port->write_urb) {
-			err("No free urbs available");
-			goto probe_error;
-		}
-		buffer_size = endpoint->wMaxPacketSize;
-		port->bulk_out_size = buffer_size;
-		port->bulk_out_endpointAddress = endpoint->bEndpointAddress;
-		port->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
-		if (!port->bulk_out_buffer) {
-			err("Couldn't allocate bulk_out_buffer");
-			goto probe_error;
-		}
-		usb_fill_bulk_urb(port->write_urb, dev,
-				  usb_sndbulkpipe(dev,
-						  endpoint->bEndpointAddress),
-				  port->bulk_out_buffer, buffer_size,
-				  qt_write_bulk_callback, port);
-
-	}
-
-	/* For us numb of bulkin  or out = number of ports */
-	mydbg("%s - setting up %d port structures for this device\n",
-	      __func__, num_bulk_in);
-	for (i = 0; i < num_bulk_in; ++i) {
-		port = &serial->port[i];
-		port->number = i + serial->minor;
-		port->serial = serial;
-
-		INIT_WORK(&port->work, port_softint);
-
-		init_MUTEX(&port->sem);
-
-	}
-	status = box_get_device(serial, &DeviceData);
-	if (status < 0) {
-		mydbg(__FILE__ "box_get_device failed");
-		goto probe_error;
-	}
-
-	mydbg(__FILE__ "DeviceData.portb = 0x%x", DeviceData.portb);
-
-	DeviceData.portb &= ~FULLPWRBIT;
-	mydbg(__FILE__ "Changing DeviceData.portb to 0x%x", DeviceData.portb);
-
-	status = box_set_device(serial, &DeviceData);
-	if (status < 0) {
-		mydbg(__FILE__ "box_set_device failed\n");
-		goto probe_error;
-	}
-
-	/* initialize the devfs nodes for this device and let the user know what ports we are bound to */
-	for (i = 0; i < serial->num_ports; ++i) {
-		dev_info(&interface->dev,
-			 "Converter now attached to ttyUSB%d (or usb/tts/%d for devfs)",
-			 serial->port[i].number, serial->port[i].number);
-	}
-
-	/* usb_serial_console_init (debug, minor); */
-
-	/***********TAG add start next board here ****/
-	status = box_get_device(serial, &DeviceData);
-	if (status < 0) {
-		mydbg(__FILE__ "box_get_device failed");
-		goto probe_error;
-	}
-	/*
-	 * and before we power up lets initialiaze parnent device stuff here before
-	 * we set thmem via any other method such as the property pages
-	 */
-	switch (serial->product) {
-	case DEVICE_ID_QUATECH_RS232_SINGLE_PORT:
-	case DEVICE_ID_QUATECH_RS232_DUAL_PORT:
-	case DEVICE_ID_QUATECH_RS232_FOUR_PORT:
-	case DEVICE_ID_QUATECH_RS232_EIGHT_PORT_A:
-	case DEVICE_ID_QUATECH_RS232_EIGHT_PORT_B:
-	case DEVICE_ID_QUATECH_RS232_16_PORT_A:
-	case DEVICE_ID_QUATECH_RS232_16_PORT_B:
-	case DEVICE_ID_QUATECH_RS232_16_PORT_C:
-	case DEVICE_ID_QUATECH_RS232_16_PORT_D:
-		DeviceData.porta &= ~(RR_BITS | DUPMODE_BITS);
-		DeviceData.porta |= CLKS_X4;
-		DeviceData.portb &= ~(LOOPMODE_BITS);
-		DeviceData.portb |= RS232_MODE;
-		break;
-
-	case DEVICE_ID_QUATECH_RS422_SINGLE_PORT:
-	case DEVICE_ID_QUATECH_RS422_DUAL_PORT:
-	case DEVICE_ID_QUATECH_RS422_FOUR_PORT:
-	case DEVICE_ID_QUATECH_RS422_EIGHT_PORT_A:
-	case DEVICE_ID_QUATECH_RS422_EIGHT_PORT_B:
-	case DEVICE_ID_QUATECH_RS422_16_PORT_A:
-	case DEVICE_ID_QUATECH_RS422_16_PORT_B:
-	case DEVICE_ID_QUATECH_RS422_16_PORT_C:
-	case DEVICE_ID_QUATECH_RS422_16_PORT_D:
-		DeviceData.porta &= ~(RR_BITS | DUPMODE_BITS);
-		DeviceData.porta |= CLKS_X4;
-		DeviceData.portb &= ~(LOOPMODE_BITS);
-		DeviceData.portb |= ALL_LOOPBACK;
-		break;
-	default:
-		DeviceData.porta &= ~(RR_BITS | DUPMODE_BITS);
-		DeviceData.porta |= CLKS_X4;
-		DeviceData.portb &= ~(LOOPMODE_BITS);
-		DeviceData.portb |= RS232_MODE;
-		break;
-
-	}
-	status = BoxSetPrebufferLevel(serial);	/* sets to default vaue */
-	if (status < 0) {
-		mydbg(__FILE__ "BoxSetPrebufferLevel failed\n");
-		goto probe_error;
-	}
-
-	status = BoxSetATC(serial, ATC_DISABLED);
-	if (status < 0) {
-		mydbg(__FILE__ "BoxSetATC failed\n");
-		goto probe_error;
-	}
-	/**********************************************************/
-	mydbg(__FILE__ "DeviceData.portb = 0x%x", DeviceData.portb);
-
-	DeviceData.portb |= NEXT_BOARD_POWER_BIT;
-	mydbg(__FILE__ "Changing DeviceData.portb to 0x%x", DeviceData.portb);
-
-	status = box_set_device(serial, &DeviceData);
-	if (status < 0) {
-		mydbg(__FILE__ "box_set_device failed\n");
-		goto probe_error;
-	}
-
-	mydbg("Exit Success %s\n", __func__);
-
-	usb_set_intfdata(interface, serial);
-	return 0;
-
-probe_error:
-
-	for (i = 0; i < num_bulk_in; ++i) {
-		port = &serial->port[i];
-		usb_free_urb(port->read_urb);
-		kfree(port->bulk_in_buffer);
-	}
-	for (i = 0; i < num_bulk_out; ++i) {
-		port = &serial->port[i];
-		usb_free_urb(port->write_urb);
-		kfree(port->bulk_out_buffer);
-		kfree(port->xfer_to_tty_buffer);
-	}
-	for (i = 0; i < num_interrupt_in; ++i) {
-		port = &serial->port[i];
-		usb_free_urb(port->interrupt_in_urb);
-		kfree(port->interrupt_in_buffer);
-	}
-
-	/* return the minor range that this device had */
-	return_serial(serial);
-	mydbg("Exit fail %s\n", __func__);
-
-	/* free up any memory that we allocated */
-	kfree(serial);
-	return -EIO;
-}
-
-/*
- * returns the serial_table array pointers that are taken
- * up in consecutive positions for each port to a common usb_serial structure
- * back to NULL
- */
-static void return_serial(struct usb_serial *serial)
-{
-	int i;
-
-	mydbg("%s\n", __func__);
-
-	if (serial == NULL)
-		return;
-
-	for (i = 0; i < serial->num_ports; ++i)
-		serial_table[serial->minor + i] = NULL;
-
-	return;
-}
-
-/*
- * Finds the first locatio int the serial_table array where it can fit
- * num_ports number of consecutive points to a common usb_serial
- * structure,allocates a stucture points to it in all the structures, and
- * returns the index to the first location in the array in the "minor"
- * variable.
- */
-static struct usb_serial *get_free_serial(int num_ports, int *minor)
-{
-	struct usb_serial *serial = NULL;
-	int i, j;
-	int good_spot;
-
-	mydbg("%s %d\n", __func__, num_ports);
-
-	*minor = 0;
-	for (i = 0; i < SERIAL_TTY_MINORS; ++i) {
-		if (serial_table[i])
-			continue;
-
-		good_spot = 1;
-		/*
-		 * find a spot in the array where you can fit consecutive
-		 * positions to put the pointers to the usb_serail allocated
-		 * structure for all the minor numbers (ie. ports)
-		 */
-		for (j = 1; j <= num_ports - 1; ++j)
-			if (serial_table[i + j])
-				good_spot = 0;
-		if (good_spot == 0)
-			continue;
-
-		serial = kmalloc(sizeof(struct usb_serial), GFP_KERNEL);
-		if (!serial) {
-			err("%s - Out of memory", __func__);
-			return NULL;
-		}
-		memset(serial, 0, sizeof(struct usb_serial));
-		serial_table[i] = serial;
-		*minor = i;
-		mydbg("%s - minor base = %d\n", __func__, *minor);
-
-		/*
-		 * copy in the pointer into the array starting a the *minor
-		 * position minor is the index into the array.
-		 */
-		for (i = *minor + 1;
-		     (i < (*minor + num_ports)) && (i < SERIAL_TTY_MINORS); ++i)
-			serial_table[i] = serial;
-		return serial;
-	}
-	return NULL;
-}
-
-static int flip_that(struct tty_struct *tty, __u16 index,
-		     struct usb_serial *serial)
-{
-	tty_flip_buffer_push(tty);
-	tty_schedule_flip(tty);
-	return 0;
-}
-
-/* Handles processing and moving data to the tty layer */
-static void port_sofrint(void *private)
-{
-	struct usb_serial_port *port = private;
-	struct usb_serial *serial = get_usb_serial(port, __func__);
-	struct tty_struct *tty = port->tty;
-	unsigned char *data = port->read_urb->transfer_buffer;
-	unsigned int index;
-	struct urb *urb = port->read_urb;
-	unsigned int RxCount = urb->actual_length;
-	int i, result;
-	int flag, flag_data;
-
-	/* index = MINOR(port->tty->device) - serial->minor; */
-	index = tty->index - serial->minor;
-
-	mydbg("%s - port %d\n", __func__, port->number);
-	mydbg("%s - port->RxHolding = %d\n", __func__, port->RxHolding);
-
-	if (port_paranoia_check(port, __func__) != 0) {
-		mydbg("%s - port_paranoia_check, exiting\n", __func__);
-		port->ReadBulkStopped = 1;
-		return;
-	}
-
-	if (!serial) {
-		mydbg("%s - bad serial pointer, exiting\n", __func__);
-		return;
-	}
-	if (port->closePending == 1) {
-		/* Were closing , stop reading */
-		mydbg("%s - (port->closepending == 1\n", __func__);
-		port->ReadBulkStopped = 1;
-		return;
-	}
-
-	/*
-	 * RxHolding is asserted by throttle, if we assert it, we're not
-	 * receiving any more characters and let the box handle the flow
-	 * control
-	 */
-	if (port->RxHolding == 1) {
-		port->ReadBulkStopped = 1;
-		return;
-	}
-
-	if (urb->status) {
-		port->ReadBulkStopped = 1;
-
-		mydbg("%s - nonzero read bulk status received: %d\n",
-		      __func__, urb->status);
-		return;
-	}
-
-	tty = port->tty;
-	mydbg("%s - port %d, tty =0x%p\n", __func__, port->number, tty);
-
-	if (tty && RxCount) {
-		flag_data = 0;
-		for (i = 0; i < RxCount; ++i) {
-			/* Look ahead code here */
-			if ((i <= (RxCount - 3)) && (THISCHAR == 0x1b)
-			    && (NEXTCHAR == 0x1b)) {
-				flag = 0;
-				switch (THIRDCHAR) {
-				case 0x00:
-					/* Line status change 4th byte must follow */
-					if (i > (RxCount - 4)) {
-						mydbg("Illegal escape sequences in received data\n");
-						break;
-					}
-					ProcessLineStatus(port, FOURTHCHAR);
-					i += 3;
-					flag = 1;
-					break;
-
-				case 0x01:
-					/* Modem status status change 4th byte must follow */
-					mydbg("Modem status status. \n");
-					if (i > (RxCount - 4)) {
-						mydbg
-						    ("Illegal escape sequences in received data\n");
-						break;
-					}
-					ProcessModemStatus(port, FOURTHCHAR);
-					i += 3;
-					flag = 1;
-					break;
-				case 0xff:
-					mydbg("No status sequence. \n");
-
-					ProcessRxChar(port, THISCHAR);
-					ProcessRxChar(port, NEXTCHAR);
-					i += 2;
-					break;
-				}
-				if (flag == 1)
-					continue;
-			}
-
-			if (tty && urb->actual_length) {
-				tty_buffer_request_room(tty, 1);
-				tty_insert_flip_string(tty, (data + i), 1);
-			}
-
-		}
-		tty_flip_buffer_push(tty);
-	}
-
-	/* Continue trying to always read  */
-	usb_fill_bulk_urb(port->read_urb, serial->dev,
-			  usb_rcvbulkpipe(serial->dev,
-					  port->bulk_in_endpointAddress),
-			  port->read_urb->transfer_buffer,
-			  port->read_urb->transfer_buffer_length,
-			  qt_read_bulk_callback, port);
-	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
-	if (result)
-		mydbg("%s - failed resubmitting read urb, error %d",
-		      __func__, result);
-	else {
-		if (tty && RxCount)
-			flip_that(tty, index, serial);
-	}
-
-	return;
-
-}
-
-static void qt_read_bulk_callback(struct urb *urb)
-{
-
-	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
-
-	if (urb->status) {
-		port->ReadBulkStopped = 1;
-		mydbg("%s - nonzero write bulk status received: %d\n",
-		      __func__, urb->status);
-		return;
-	}
-
-	port_sofrint((void *)port);
-	schedule_work(&port->work);
-}
-
-static void ProcessRxChar(struct usb_serial_port *port, unsigned char Data)
-{
-	struct tty_struct *tty;
-	struct urb *urb = port->read_urb;
-	tty = port->tty;
-	/* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */
-
-	if (tty && urb->actual_length) {
-		tty_buffer_request_room(tty, 1);
-		tty_insert_flip_string(tty, &Data, 1);
-		/* tty_flip_buffer_push(tty); */
-	}
-
-	return;
-}
-
-static void ProcessLineStatus(struct usb_serial_port *port,
-			      unsigned char line_status)
-{
-
-	port->shadowLSR =
-	    line_status & (SERIAL_LSR_OE | SERIAL_LSR_PE | SERIAL_LSR_FE |
-			   SERIAL_LSR_BI);
-	return;
-}
-
-static void ProcessModemStatus(struct usb_serial_port *port,
-			       unsigned char modem_status)
-{
-
-	port->shadowMSR = modem_status;
-	wake_up_interruptible(&port->wait);
-	return;
-}
-
-static void serqt_usb_disconnect(struct usb_interface *interface)
-{
-	struct usb_serial *serial = usb_get_intfdata(interface);
-	/* struct device *dev = &interface->dev; */
-	struct usb_serial_port *port;
-	int i;
-
-	mydbg("%s\n", __func__);
-	if (serial) {
-
-		serial->dev = NULL;
-
-		for (i = 0; i < serial->num_ports; ++i)
-			serial->port[i].open_count = 0;
-
-		for (i = 0; i < serial->num_bulk_in; ++i) {
-			port = &serial->port[i];
-			usb_unlink_urb(port->read_urb);
-			usb_free_urb(port->read_urb);
-			kfree(port->bulk_in_buffer);
-		}
-		for (i = 0; i < serial->num_bulk_out; ++i) {
-			port = &serial->port[i];
-			usb_unlink_urb(port->write_urb);
-			usb_free_urb(port->write_urb);
-			kfree(port->bulk_out_buffer);
-		}
-		for (i = 0; i < serial->num_interrupt_in; ++i) {
-			port = &serial->port[i];
-			usb_unlink_urb(port->interrupt_in_urb);
-			usb_free_urb(port->interrupt_in_urb);
-			kfree(port->interrupt_in_buffer);
-	}
-
-		/* return the minor range that this device had */
-		return_serial(serial);
-
-		/* free up any memory that we allocated */
-		kfree(serial);
-
-	} else {
-		dev_info(&interface->dev, "device disconnected");
-	}
-
-}
-
-static struct usb_serial *get_serial_by_minor(unsigned int minor)
-{
-	return serial_table[minor];
-}
-
-/*****************************************************************************
- * Driver tty interface functions
- *****************************************************************************/
-static int serial_open(struct tty_struct *tty, struct file *filp)
-{
-	struct usb_serial *serial;
-	struct usb_serial_port *port;
-	unsigned int portNumber;
-	int retval = 0;
-
-	mydbg("%s\n", __func__);
-
-	/* initialize the pointer incase something fails */
-	tty->driver_data = NULL;
-
-	/* get the serial object associated with this tty pointer */
-	/* serial = get_serial_by_minor (MINOR(tty->device)); */
-
-	/* get the serial object associated with this tty pointer */
-	serial = get_serial_by_minor(tty->index);
-
-	if (serial_paranoia_check(serial, __func__))
-		return -ENODEV;
-
-	/* set up our port structure making the tty driver remember our port object, and us it */
-	portNumber = tty->index - serial->minor;
-	port = &serial->port[portNumber];
-	tty->driver_data = port;
-
-	down(&port->sem);
-	port->tty = tty;
-
-	++port->open_count;
-	if (port->open_count == 1) {
-		port->closePending = 0;
-		mydbg("%s port->closepending = 0\n", __func__);
-
-		port->RxHolding = 0;
-		mydbg("%s port->RxHolding = 0\n", __func__);
-
-		retval = qt_open(tty, port, filp);
-	}
-
-	if (retval)
-		port->open_count = 0;
-	mydbg("%s returning port->closePending  = %d\n", __func__,
-	      port->closePending);
-
-	up(&port->sem);
-	return retval;
-}
-
-/*****************************************************************************
- *device's specific driver functions
- *****************************************************************************/
-static int qt_open(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filp)
-{
-	struct usb_serial *serial = port->serial;
-	int result = 0;
-	unsigned int index;
-	struct qt_get_device_data DeviceData;
-	struct qt_open_channel_data ChannelData;
-	unsigned short default_divisor = 0x30;		/* gives 9600 baud rate */
-	unsigned char default_LCR = SERIAL_8_DATA;	/* 8, none , 1 */
-	int status = 0;
-
-	if (port_paranoia_check(port, __func__))
-		return -ENODEV;
-
-	mydbg("%s - port %d\n", __func__, port->number);
-
-	index = tty->index - serial->minor;
-
-	status = box_get_device(serial, &DeviceData);
-	if (status < 0) {
-		mydbg(__FILE__ "box_get_device failed\n");
-		return status;
-	}
-	serial->num_OpenCount++;
-	mydbg("%s serial->num_OpenCount  = %d\n", __func__,
-	      serial->num_OpenCount);
-	/* Open uart channel */
-
-	/* Port specific setups */
-	status = BoxOPenCloseChannel(serial, index, 1, &ChannelData);
-	if (status < 0) {
-		mydbg(__FILE__ "BoxOPenCloseChannel failed\n");
-		return status;
-	}
-	mydbg(__FILE__ "BoxOPenCloseChannel completed.\n");
-
-	port->shadowLSR = ChannelData.line_status &
-	    (SERIAL_LSR_OE | SERIAL_LSR_PE | SERIAL_LSR_FE | SERIAL_LSR_BI);
-
-	port->shadowMSR = ChannelData.modem_status &
-	    (SERIAL_MSR_CTS | SERIAL_MSR_DSR | SERIAL_MSR_RI | SERIAL_MSR_CD);
-
-	/* Set Baud rate to default and turn off (default)flow control here */
-	status = BoxSetUart(serial, index, default_divisor, default_LCR);
-	if (status < 0) {
-		mydbg(__FILE__ "BoxSetUart failed\n");
-		return status;
-	}
-	mydbg(__FILE__ "BoxSetUart completed.\n");
-
-	/* Put this here to make it responsive to stty and defauls set by the tty layer */
-	qt_set_termios(tty, port, NULL);
-
-	/* Initialize the wait que head */
-	init_waitqueue_head(&(port->wait));
-
-	/* if we have a bulk endpoint, start reading from it */
-	if (serial->num_bulk_in) {
-		/* Start reading from the device */
-		usb_fill_bulk_urb(port->read_urb, serial->dev,
-				  usb_rcvbulkpipe(serial->dev,
-						  port->
-						  bulk_in_endpointAddress),
-				  port->read_urb->transfer_buffer,
-				  port->read_urb->transfer_buffer_length,
-				  qt_read_bulk_callback, port);
-
-		port->ReadBulkStopped = 0;
-
-		result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
-
-		if (result) {
-			err("%s - failed resubmitting read urb, error %d\n",
-			    __func__, result);
-			port->ReadBulkStopped = 1;
-		}
-
-	}
-
-	return result;
-}
-
-static void serial_close(struct tty_struct *tty, struct file *filp)
-{
-	struct usb_serial_port *port =
-	    tty->driver_data;
-	struct usb_serial *serial = get_usb_serial(port, __func__);
-
-	if (!serial)
-		return;
-
-	down(&port->sem);
-
-	mydbg("%s - port %d\n", __func__, port->number);
-
-	/* if disconnect beat us to the punch here, there's nothing to do */
-	if (tty->driver_data) {
-		if (!port->open_count) {
-			mydbg("%s - port not opened\n", __func__);
-			goto exit;
-		}
-
-		--port->open_count;
-		if (port->open_count <= 0) {
-			port->closePending = 1;
-			mydbg("%s - port->closePending = 1\n", __func__);
-
-			if (serial->dev) {
-				qt_close(tty, port, filp);
-				port->open_count = 0;
-			}
-		}
-
-	}
-
-exit:
-	up(&port->sem);
-
-	mydbg("%s - %d return\n", __func__, port->number);
-
-}
-
-static void qt_close(struct tty_struct *tty, struct usb_serial_port *port,
-							struct file *filp)
-{
-	unsigned long jift = jiffies + 10 * HZ;
-	u8 lsr, mcr;
-	struct usb_serial *serial = port->serial;
-	int status;
-	unsigned int index;
-
-	struct qt_open_channel_data ChannelData;
-	status = 0;
-	lsr = 0;
-
-	mydbg("%s - port %d\n", __func__, port->number);
-	index = tty->index - serial->minor;
-
-	/* shutdown any bulk reads that might be going on */
-	if (serial->num_bulk_out)
-		usb_unlink_urb(port->write_urb);
-	if (serial->num_bulk_in)
-		usb_unlink_urb(port->read_urb);
-
-	/* wait up to 30 seconds for transmitter to empty */
-	do {
-		status = BoxGetRegister(serial, index, LINE_STATUS_REGISTER, &lsr);
-		if (status < 0) {
-			mydbg(__FILE__ "box_get_device failed\n");
-			break;
-		}
-
-		if ((lsr & SERIAL_LSR_TEMT)
-		    && (port->ReadBulkStopped == 1))
-			break;
-		schedule();
-
-	}
-	while (jiffies <= jift);
-
-	if (jiffies > jift)
-		mydbg("%s - port %d timout of checking transmitter empty\n",
-		      __func__, port->number);
-	else
-		mydbg("%s - port %d checking transmitter empty succeded\n",
-		      __func__, port->number);
-
-	status =
-	    BoxGetRegister(serial, index, MODEM_CONTROL_REGISTER,
-			   &mcr);
-	mydbg(__FILE__ "BoxGetRegister MCR = 0x%x.\n", mcr);
-
-	if (status >= 0) {
-		mcr &= ~(SERIAL_MCR_DTR | SERIAL_MCR_RTS);
-		/* status = BoxSetRegister(serial, index, MODEM_CONTROL_REGISTER, mcr); */
-	}
-
-	/* Close uart channel */
-	status = BoxOPenCloseChannel(serial, index, 0, &ChannelData);
-	if (status < 0)
-		mydbg("%s - port %d BoxOPenCloseChannel failed.\n",
-		      __func__, port->number);
-
-	serial->num_OpenCount--;
-
-}
-
-static int serial_write(struct tty_struct *tty, const unsigned char *buf,
-			int count)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct usb_serial *serial;
-	int retval = -EINVAL;
-	unsigned int index;
-
-	serial = get_usb_serial(port, __func__);
-	if (serial == NULL)
-		return -ENODEV;
-	/* This can happen if we get disconnected a */
-	if (port->open_count == 0)
-		return -ENODEV;
-	index = tty->index - serial->minor;
-
-	mydbg("%s - port %d, %d byte(s)\n", __func__, port->number, count);
-	mydbg("%s - port->RxHolding =  %d\n", __func__, port->RxHolding);
-
-	if (!port->open_count) {
-		mydbg("%s - port not opened\n", __func__);
-		goto exit;
-	}
-
-	retval = qt_write(tty, port, buf, count);
-
-exit:
-	return retval;
-}
-
-static int qt_write(struct tty_struct *tty, struct usb_serial_port *port,
-				const unsigned char *buf, int count)
-{
-	int result;
-	unsigned int index;
-	struct usb_serial *serial = get_usb_serial(port, __func__);
-
-	if (serial == NULL)
-		return -ENODEV;
-
-	mydbg("%s - port %d\n", __func__, port->number);
-
-	if (count == 0) {
-		mydbg("%s - write request of 0 bytes\n", __func__);
-		return 0;
-	}
-
-	index = tty->index - serial->minor;
-	/* only do something if we have a bulk out endpoint */
-	if (serial->num_bulk_out) {
-		if (port->write_urb->status == -EINPROGRESS) {
-			mydbg("%s - already writing\n", __func__);
-			return 0;
-		}
-
-		count =
-		    (count > port->bulk_out_size) ? port->bulk_out_size : count;
-		memcpy(port->write_urb->transfer_buffer, buf, count);
-
-		/* usb_serial_debug_data(__FILE__, __func__, count, port->write_urb->transfer_buffer); */
-
-		/* set up our urb */
-
-		usb_fill_bulk_urb(port->write_urb, serial->dev,
-				  usb_sndbulkpipe(serial->dev,
-						  port->
-						  bulk_out_endpointAddress),
-				  port->write_urb->transfer_buffer, count,
-				  qt_write_bulk_callback, port);
-
-		/* send the data out the bulk port */
-		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-		if (result)
-			mydbg("%s - failed submitting write urb, error %d\n",
-			      __func__, result);
-		else
-			result = count;
-
-		return result;
-	}
-
-	/* no bulk out, so return 0 bytes written */
-	return 0;
-}
-
-static void qt_write_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
-	struct usb_serial *serial = get_usb_serial(port, __func__);
-
-	mydbg("%s - port %d\n", __func__, port->number);
-
-	if (!serial) {
-		mydbg("%s - bad serial pointer, exiting\n", __func__);
-		return;
-	}
-
-	if (urb->status) {
-		mydbg("%s - nonzero write bulk status received: %d\n",
-		      __func__, urb->status);
-		return;
-	}
-	port_softint(&port->work);
-	schedule_work(&port->work);
-
-	return;
-}
-
-static void port_softint(struct work_struct *work)
-{
-	struct usb_serial_port *port =
-	    container_of(work, struct usb_serial_port, work);
-	struct usb_serial *serial = get_usb_serial(port, __func__);
-	struct tty_struct *tty;
-
-	mydbg("%s - port %d\n", __func__, port->number);
-
-	if (!serial)
-		return;
-
-	tty = port->tty;
-	if (!tty)
-		return;
-#if 0
-	if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP))
-	    && tty->ldisc.write_wakeup) {
-		mydbg("%s - write wakeup call.\n", __func__);
-		(tty->ldisc.write_wakeup) (tty);
-	}
-#endif
-
-	wake_up_interruptible(&tty->write_wait);
-}
-static int serial_write_room(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct usb_serial *serial = get_usb_serial(port, __func__);
-	int retval = -EINVAL;
-
-	if (!serial)
-		return -ENODEV;
-
-	down(&port->sem);
-
-	mydbg("%s - port %d\n", __func__, port->number);
-
-	if (!port->open_count) {
-		mydbg("%s - port not open\n", __func__);
-		goto exit;
-	}
-
-	retval = qt_write_room(port);
-
-exit:
-	up(&port->sem);
-	return retval;
-}
-static int qt_write_room(struct usb_serial_port *port)
-{
-	struct usb_serial *serial = port->serial;
-	int room = 0;
-	if (port->closePending == 1) {
-		mydbg("%s - port->closePending == 1\n", __func__);
-		return -ENODEV;
-	}
-
-	mydbg("%s - port %d\n", __func__, port->number);
-
-	if (serial->num_bulk_out) {
-		if (port->write_urb->status != -EINPROGRESS)
-			room = port->bulk_out_size;
-	}
-
-	mydbg("%s - returns %d\n", __func__, room);
-	return room;
-}
-static int serial_chars_in_buffer(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct usb_serial *serial = get_usb_serial(port, __func__);
-	int retval = -EINVAL;
-
-	if (!serial)
-		return -ENODEV;
-
-	down(&port->sem);
-
-	mydbg("%s = port %d\n", __func__, port->number);
-
-	if (!port->open_count) {
-		mydbg("%s - port not open\n", __func__);
-		goto exit;
-	}
-
-	retval = qt_chars_in_buffer(port);
-
-exit:
-	up(&port->sem);
-	return retval;
-}
-
-static int qt_chars_in_buffer(struct usb_serial_port *port)
-{
-	struct usb_serial *serial = port->serial;
-	int chars = 0;
-
-	mydbg("%s - port %d\n", __func__, port->number);
-
-	if (serial->num_bulk_out) {
-		if (port->write_urb->status == -EINPROGRESS)
-			chars = port->write_urb->transfer_buffer_length;
-	}
-
-	mydbg("%s - returns %d\n", __func__, chars);
-	return chars;
-}
-
-static int serial_tiocmset(struct tty_struct *tty, struct file *file,
-			   unsigned int set, unsigned int clear)
-{
-
-	struct usb_serial_port *port = tty->driver_data;
-	struct usb_serial *serial = get_usb_serial(port, __func__);
-	int retval = -ENODEV;
-	unsigned int index;
-	mydbg("In %s \n", __func__);
-
-	if (!serial)
-		return -ENODEV;
-
-	index = tty->index - serial->minor;
-
-	down(&port->sem);
-
-	mydbg("%s - port %d \n", __func__, port->number);
-	mydbg("%s - port->RxHolding = %d\n", __func__, port->RxHolding);
-
-	if (!port->open_count) {
-		mydbg("%s - port not open\n", __func__);
-		goto exit;
-	}
-
-	retval = qt_tiocmset(tty, port, file, set);
-
-exit:
-	up(&port->sem);
-	return retval;
-}
-
-static int qt_tiocmset(struct tty_struct *tty, struct usb_serial_port *port,
-		       struct file *file, unsigned int value)
-{
-
-	u8 mcr;
-	int status;
-	unsigned int index;
-	struct usb_serial *serial = get_usb_serial(port, __func__);
-
-	if (serial == NULL)
-		return -ENODEV;
-
-	mydbg("%s - port %d\n", __func__, port->number);
-
-    /**************************************************************************************/
-    /**  TIOCMGET
-     */
-	index = tty->index - serial->minor;
-	status =
-	    BoxGetRegister(port->serial, index, MODEM_CONTROL_REGISTER,
-			   &mcr);
-	if (status < 0)
-		return -ESPIPE;
-
-	/*
-	 * Turn off the RTS and DTR and loopbcck and then only turn on what was
-	 * asked for
-	 */
-	mcr &= ~(SERIAL_MCR_RTS | SERIAL_MCR_DTR | SERIAL_MCR_LOOP);
-	if (value & TIOCM_RTS)
-		mcr |= SERIAL_MCR_RTS;
-	if (value & TIOCM_DTR)
-		mcr |= SERIAL_MCR_DTR;
-	if (value & TIOCM_LOOP)
-		mcr |= SERIAL_MCR_LOOP;
-
-	status =
-	    BoxSetRegister(port->serial, index, MODEM_CONTROL_REGISTER,
-			   mcr);
-	if (status < 0)
-		return -ESPIPE;
-	else
-		return 0;
-}
-
-static int serial_tiocmget(struct tty_struct *tty, struct file *file)
-{
-
-	struct usb_serial_port *port = tty->driver_data;
-	struct usb_serial *serial = get_usb_serial(port, __func__);
-	int retval = -ENODEV;
-	unsigned int index;
-	mydbg("In %s \n", __func__);
-
-	if (!serial)
-		return -ENODEV;
-
-	index = tty->index - serial->minor;
-
-	down(&port->sem);
-
-	mydbg("%s - port %d\n", __func__, port->number);
-	mydbg("%s - port->RxHolding = %d\n", __func__, port->RxHolding);
-
-	if (!port->open_count) {
-		mydbg("%s - port not open\n", __func__);
-		goto exit;
-	}
-
-	retval = qt_tiocmget(tty, port, file);
-
-exit:
-	up(&port->sem);
-	return retval;
-}
-
-static int qt_tiocmget(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *file)
-{
-
-	u8 mcr;
-	u8 msr;
-	unsigned int result = 0;
-	int status;
-	unsigned int index;
-
-	struct usb_serial *serial = get_usb_serial(port, __func__);
-	if (serial == NULL)
-		return -ENODEV;
-
-	mydbg("%s - port %d, tty =0x%p\n", __func__, port->number, tty);
-
-    /**************************************************************************************/
-    /**  TIOCMGET
-     */
-	index = tty->index - serial->minor;
-	status =
-	    BoxGetRegister(port->serial, index, MODEM_CONTROL_REGISTER,
-			   &mcr);
-	if (status >= 0) {
-		status =
-		    BoxGetRegister(port->serial, index,
-				   MODEM_STATUS_REGISTER, &msr);
-
-	}
-
-	if (status >= 0) {
-		result = ((mcr & SERIAL_MCR_DTR) ? TIOCM_DTR : 0)
-		    /* DTR IS SET */
-		    | ((mcr & SERIAL_MCR_RTS) ? TIOCM_RTS : 0)
-		    /* RTS IS SET */
-		    | ((msr & SERIAL_MSR_CTS) ? TIOCM_CTS : 0)
-		    /* CTS is set */
-		    | ((msr & SERIAL_MSR_CD) ? TIOCM_CAR : 0)
-		    /* Carrier detect is set */
-		    | ((msr & SERIAL_MSR_RI) ? TIOCM_RI : 0)
-		    /* Ring indicator set */
-		    | ((msr & SERIAL_MSR_DSR) ? TIOCM_DSR : 0);
-		/* DSR is set */
-		return result;
-
-	} else
-		return -ESPIPE;
-}
-
-static int serial_ioctl(struct tty_struct *tty, struct file *file,
-			unsigned int cmd, unsigned long arg)
-{
-
-	struct usb_serial_port *port = tty->driver_data;
-	struct usb_serial *serial = get_usb_serial(port, __func__);
-	int retval = -ENODEV;
-	unsigned int index;
-	mydbg("In %s \n", __func__);
-
-	if (!serial)
-		return -ENODEV;
-
-	index = tty->index - serial->minor;
-
-	down(&port->sem);
-
-	mydbg("%s - port %d, cmd 0x%.4x\n", __func__, port->number, cmd);
-	mydbg("%s - port->RxHolding = %d\n", __func__, port->RxHolding);
-
-	if (!port->open_count) {
-		mydbg("%s - port not open\n", __func__);
-		goto exit;
-	}
-
-	retval = qt_ioctl(tty, port, file, cmd, arg);
-
-exit:
-	up(&port->sem);
-	return retval;
-}
-static int qt_ioctl(struct tty_struct *tty, struct usb_serial_port *port,
-			struct file *file, unsigned int cmd, unsigned long arg)
-{
-	__u8 mcr;
-	__u8 msr;
-	unsigned short prev_msr;
-	unsigned int value, result = 0;
-	int status;
-	unsigned int index;
-
-	struct usb_serial *serial = get_usb_serial(port, __func__);
-	if (serial == NULL)
-		return -ENODEV;
-
-	mydbg("%s - port %d, tty =0x%p\n", __func__, port->number, tty);
-
-	/* TIOCMGET */
-	index = tty->index - serial->minor;
-
-	if (cmd == TIOCMIWAIT) {
-		DECLARE_WAITQUEUE(wait, current);
-		prev_msr = port->shadowMSR & SERIAL_MSR_MASK;
-		while (1) {
-			add_wait_queue(&port->wait, &wait);
-			set_current_state(TASK_INTERRUPTIBLE);
-			schedule();
-			remove_wait_queue(&port->wait, &wait);
-			/* see if a signal woke us up */
-			if (signal_pending(current))
-				return -ERESTARTSYS;
-			msr = port->shadowMSR & SERIAL_MSR_MASK;
-			if (msr == prev_msr)
-				return -EIO;	/* no change error */
-
-			if ((arg & TIOCM_RNG
-			     && ((prev_msr & SERIAL_MSR_RI) ==
-				 (msr & SERIAL_MSR_RI)))
-			    || (arg & TIOCM_DSR
-				&& ((prev_msr & SERIAL_MSR_DSR) ==
-				    (msr & SERIAL_MSR_DSR)))
-			    || (arg & TIOCM_CD
-				&& ((prev_msr & SERIAL_MSR_CD) ==
-				    (msr & SERIAL_MSR_CD)))
-			    || (arg & TIOCM_CTS
-				&& ((prev_msr & SERIAL_MSR_CTS) ==
-				    (msr & SERIAL_MSR_CTS)))) {
-				return 0;
-			}
-
-		}
-
-	}
-	mydbg("%s -No ioctl for that one.  port = %d\n", __func__,
-	      port->number);
-
-	return -ENOIOCTLCMD;
-}
-
-static void serial_set_termios(struct tty_struct *tty, struct ktermios *old)
-{
-	struct usb_serial_port *port =
-	    tty->driver_data;
-	struct usb_serial *serial = get_usb_serial(port, __func__);
-
-	if (!serial)
-		return;
-
-	down(&port->sem);
-
-	mydbg("%s - port %d\n", __func__, port->number);
-
-	if (!port->open_count) {
-		mydbg("%s - port not open\n", __func__);
-		goto exit;
-	}
-
-	/* pass on to the driver specific version of this function if it is available */
-	qt_set_termios(tty, port, old);
-
-exit:
-	up(&port->sem);
-}
-
-static void qt_set_termios(struct tty_struct *tty,
-			   struct usb_serial_port *port,
-			   struct ktermios *old_termios)
-{
-	unsigned int cflag;
-	int baud, divisor, remainder;
-	unsigned char new_LCR = 0;
-	int status;
-	struct usb_serial *serial;
-	__u16 index;
-	__u16 tmp, tmp2;
-
-	mydbg("%s - port %d\n", __func__, port->number);
-
-	tmp = port->tty->index;
-	mydbg("%s - MINOR(port->tty->index) =  %d\n", __func__, tmp);
-
-	serial = port->serial;
-	tmp2 = serial->minor;
-	mydbg("%s - serial->minor =  %d\n", __func__, tmp2);
-
-	index = port->tty->index - serial->minor;
-
-	cflag = tty->termios->c_cflag;
-
-	mydbg("%s - 3\n", __func__);
-
-	switch (cflag) {
-	case CS5:
-		new_LCR |= SERIAL_5_DATA;
-		break;
-	case CS6:
-		new_LCR |= SERIAL_6_DATA;
-		break;
-	case CS7:
-		new_LCR |= SERIAL_7_DATA;
-		break;
-	default:
-	case CS8:
-		new_LCR |= SERIAL_8_DATA;
-		break;
-	}
-
-	/* Parity stuff */
-	if (cflag & PARENB) {
-		if (cflag & PARODD)
-			new_LCR |= SERIAL_ODD_PARITY;
-		else
-			new_LCR |= SERIAL_EVEN_PARITY;
-	}
-	if (cflag & CSTOPB)
-		new_LCR |= SERIAL_TWO_STOPB;
-	else
-		new_LCR |= SERIAL_TWO_STOPB;
-
-	mydbg("%s - 4\n", __func__);
-	/* Thats the LCR stuff, go ahead and set it */
-	baud = tty_get_baud_rate(tty);
-	if (!baud)
-		/* pick a default, any default... */
-		baud = 9600;
-
-	mydbg("%s - got baud = %d\n", __func__, baud);
-
-	divisor = MAX_BAUD_RATE / baud;
-	remainder = MAX_BAUD_RATE % baud;
-	/* Round to nearest divisor */
-	if (((remainder * 2) >= baud) && (baud != 110))
-		divisor++;
-
-	/*
-	 * Set Baud rate to default and turn off (default)flow control here
-	 */
-	status = BoxSetUart(serial, index, (unsigned short)divisor, new_LCR);
-	if (status < 0) {
-		mydbg(__FILE__ "BoxSetUart failed\n");
-		return;
-	}
-
-	/* Now determine flow control */
-	if (cflag & CRTSCTS) {
-		mydbg("%s - Enabling HW flow control port %d\n", __func__,
-		      port->number);
-
-		/* Enable RTS/CTS flow control */
-		status = BoxSetHW_FlowCtrl(serial, index, 1);
-
-		if (status < 0) {
-			mydbg(__FILE__ "BoxSetHW_FlowCtrl failed\n");
-			return;
-		}
-	} else {
-		/* Disable RTS/CTS flow control */
-		mydbg("%s - disabling HW flow control port %d\n", __func__,
-		      port->number);
-
-		status = BoxSetHW_FlowCtrl(serial, index, 0);
-		if (status < 0) {
-			mydbg(__FILE__ "BoxSetHW_FlowCtrl failed\n");
-			return;
-		}
-
-	}
-
-	/* if we are implementing XON/XOFF, set the start and stop character in
-	 * the device */
-	if (I_IXOFF(tty) || I_IXON(tty)) {
-		unsigned char stop_char = STOP_CHAR(tty);
-		unsigned char start_char = START_CHAR(tty);
-		status =
-		    BoxSetSW_FlowCtrl(serial, index, stop_char,
-				      start_char);
-		if (status < 0)
-			mydbg(__FILE__ "BoxSetSW_FlowCtrl (enabled) failed\n");
-
-	} else {
-		/* disable SW flow control */
-		status = BoxDisable_SW_FlowCtrl(serial, index);
-		if (status < 0)
-			mydbg(__FILE__ "BoxSetSW_FlowCtrl (diabling) failed\n");
-
-	}
-	tty->termios->c_cflag &= ~CMSPAR;
-	/* FIXME: Error cases should be returning the actual bits changed only */
-}
-
-/****************************************************************************
-* BoxGetRegister
-*	issuse a GET_REGISTER vendor-spcific request on the default control pipe
-*	If successful, fills in the  pValue with the register value asked for
-****************************************************************************/
-static int BoxGetRegister(struct usb_serial *serial, unsigned short Uart_Number,
-			  unsigned short Register_Num, __u8 *pValue)
-{
-	int result;
-	__u16 current_length;
-
-	current_length = sizeof(struct qt_get_device_data);
-
-	result =
-	    usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
-			    QT_GET_SET_REGISTER, 0xC0, Register_Num,
-			    Uart_Number, (void *)pValue, sizeof(*pValue), 300);
-
-	return result;
-}
-
-/****************************************************************************
-* BoxSetRegister
-*	issuse a GET_REGISTER vendor-spcific request on the default control pipe
-*	If successful, fills in the  pValue with the register value asked for
-****************************************************************************/
-static int BoxSetRegister(struct usb_serial *serial, unsigned short Uart_Number,
-			  unsigned short Register_Num, unsigned short Value)
-{
-	int result;
-	unsigned short RegAndByte;
-
-	RegAndByte = Value;
-	RegAndByte = RegAndByte << 8;
-	RegAndByte = RegAndByte + Register_Num;
-
-/*
-	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-				 QT_GET_SET_REGISTER, 0xC0, Register_Num,
-				 Uart_Number, NULL, 0, 300);
-*/
-
-	result =
-	    usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-			    QT_GET_SET_REGISTER, 0x40, RegAndByte, Uart_Number,
-			    NULL, 0, 300);
-
-	return result;
-}
-
-/**
- * box_get_device
- *   Issue a GET_DEVICE vendor-specific request on the default control pipe If
- *   successful, fills in the qt_get_device_data structure pointed to by
- *   device_data, otherwise return a negative error number of the problem.
- */
-static int box_get_device(struct usb_serial *serial,
-			  struct qt_get_device_data *device_data)
-{
-	int result;
-	__u16 current_length;
-	unsigned char *transfer_buffer;
-
-	current_length = sizeof(struct qt_get_device_data);
-	transfer_buffer = kmalloc(current_length, GFP_KERNEL);
-	if (!transfer_buffer)
-		return -ENOMEM;
-
-	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
-				 QT_SET_GET_DEVICE, 0xc0, 0, 0,
-				 transfer_buffer, current_length, 300);
-	if (result > 0)
-		memcpy(device_data, transfer_buffer, current_length);
-	kfree(transfer_buffer);
-
-	return result;
-}
-
-/**
- * box_set_device
- *   Issue a SET_DEVICE vendor-specific request on the default control pipe If
- *   successful returns the number of bytes written, otherwise it returns a
- *   negative error number of the problem.
- */
-static int box_set_device(struct usb_serial *serial,
-			  struct qt_get_device_data *device_data)
-{
-	int result;
-	__u16 length;
-	__u16 PortSettings;
-
-	PortSettings = ((__u16) (device_data->portb));
-	PortSettings = (PortSettings << 8);
-	PortSettings += ((__u16) (device_data->porta));
-
-	length = sizeof(struct qt_get_device_data);
-	mydbg("%s - PortSettings = 0x%x\n", __func__, PortSettings);
-
-	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-				 QT_SET_GET_DEVICE, 0x40, PortSettings,
-				 0, NULL, 0, 300);
-	return result;
-}
-
-/****************************************************************************
- * BoxOPenCloseChannel
- * This funciotn notifies the device that the device driver wishes to open a particular UART channel. its
- * purpose is to allow the device driver and the device to synchronize state information.
- * OpenClose = 1 for open , 0 for close
-  ****************************************************************************/
-static int BoxOPenCloseChannel(struct usb_serial *serial, __u16 Uart_Number,
-			       __u16 OpenClose,
-			       struct qt_open_channel_data *pDeviceData)
-{
-	int result;
-	__u16 length;
-	__u8 Direcion;
-	unsigned int pipe;
-	length = sizeof(struct qt_open_channel_data);
-
-	/* if opening... */
-	if (OpenClose == 1) {
-		Direcion = USBD_TRANSFER_DIRECTION_IN;
-		pipe = usb_rcvctrlpipe(serial->dev, 0);
-		result =
-		    usb_control_msg(serial->dev, pipe, QT_OPEN_CLOSE_CHANNEL,
-				    Direcion, OpenClose, Uart_Number,
-				    pDeviceData, length, 300);
-
-	} else {
-		Direcion = USBD_TRANSFER_DIRECTION_OUT;
-		pipe = usb_sndctrlpipe(serial->dev, 0);
-		result =
-		    usb_control_msg(serial->dev, pipe, QT_OPEN_CLOSE_CHANNEL,
-				    Direcion, OpenClose, Uart_Number, NULL, 0,
-				    300);
-
-	}
-
-	return result;
-}
-
-/****************************************************************************
- *  BoxSetPrebufferLevel
-   TELLS BOX WHEN TO ASSERT FLOW CONTROL
- ****************************************************************************/
-static int BoxSetPrebufferLevel(struct usb_serial *serial)
-{
-	int result;
-	__u16 buffer_length;
-
-	buffer_length = PREFUFF_LEVEL_CONSERVATIVE;
-	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-				 QT_GET_SET_PREBUF_TRIG_LVL, 0x40,
-				 buffer_length, 0, NULL, 0, 300);
-	return result;
-}
-
-/****************************************************************************
- *  BoxSetATC
-   TELLS BOX WHEN TO ASSERT automatic transmitter control
-   ****************************************************************************/
-static int BoxSetATC(struct usb_serial *serial, __u16 n_Mode)
-{
-	int result;
-	__u16 buffer_length;
-
-	buffer_length = PREFUFF_LEVEL_CONSERVATIVE;
-
-	result =
-	    usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-			    QT_SET_ATF, 0x40, n_Mode, 0, NULL, 0, 300);
-
-	return result;
-}
-
-/****************************************************************************
-* BoxSetUart
-*	issuse a SET_UART vendor-spcific request on the default control pipe
-*	If successful sets baud rate divisor and LCR value
-****************************************************************************/
-static int BoxSetUart(struct usb_serial *serial, unsigned short Uart_Number,
-		      unsigned short default_divisor, unsigned char default_LCR)
-{
-	int result;
-	unsigned short UartNumandLCR;
-
-	UartNumandLCR = (default_LCR << 8) + Uart_Number;
-
-	result =
-	    usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-			    QT_GET_SET_UART, 0x40, default_divisor,
-			    UartNumandLCR, NULL, 0, 300);
-
-	return result;
-}
-
-static int BoxSetHW_FlowCtrl(struct usb_serial *serial, unsigned int index,
-			     int bSet)
-{
-	__u8 mcr = 0;
-	__u8 msr = 0, MOUT_Value = 0;
-	struct usb_serial_port *port;
-	unsigned int status;
-
-	port = serial->port;
-
-	if (bSet == 1) {
-		/* flow control, box will clear RTS line to prevent remote */
-		mcr = SERIAL_MCR_RTS;
-	}			/* device from xmitting more chars */
-	else {
-		/* no flow control to remote device */
-		mcr = 0;
-
-	}
-	MOUT_Value = mcr << 8;
-
-	if (bSet == 1) {
-		/* flow control, box will inhibit xmit data if CTS line is
-		 * asserted */
-		msr = SERIAL_MSR_CTS;
-	} else {
-		/* Box will not inhimbe xmit data due to CTS line */
-		msr = 0;
-	}
-	MOUT_Value |= msr;
-
-	status =
-	    usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-			    QT_HW_FLOW_CONTROL_MASK, 0x40, MOUT_Value,
-			    index, NULL, 0, 300);
-	return status;
-
-}
-
-static int BoxSetSW_FlowCtrl(struct usb_serial *serial, __u16 index,
-			     unsigned char stop_char, unsigned char start_char)
-{
-	__u16 nSWflowout;
-	int result;
-
-	nSWflowout = start_char << 8;
-	nSWflowout = (unsigned short)stop_char;
-
-	result =
-	    usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-			    QT_SW_FLOW_CONTROL_MASK, 0x40, nSWflowout,
-			    index, NULL, 0, 300);
-	return result;
-
-}
-static int BoxDisable_SW_FlowCtrl(struct usb_serial *serial, __u16 index)
-{
-	int result;
-
-	result =
-	    usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-			    QT_SW_FLOW_CONTROL_DISABLE, 0x40, 0, index,
-			    NULL, 0, 300);
-	return result;
-
-}
-
-static void serial_throttle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port =
-	    tty->driver_data;
-	struct usb_serial *serial = get_usb_serial(port, __func__);
-	mydbg("%s - port %d\n", __func__, port->number);
-
-	if (!serial)
-		return;
-
-	down(&port->sem);
-
-	if (!port->open_count) {
-		mydbg("%s - port not open\n", __func__);
-		goto exit;
-	}
-	/* shut down any bulk reads that may be going on */
-/*	usb_unlink_urb (port->read_urb); */
-	/* pass on to the driver specific version of this function */
-	port->RxHolding = 1;
-	mydbg("%s - port->RxHolding = 1\n", __func__);
-
-exit:
-	up(&port->sem);
-	return;
-}
-
-static void serial_unthrottle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port =
-	    tty->driver_data;
-	struct usb_serial *serial = get_usb_serial(port, __func__);
-	unsigned int result;
-
-	if (!serial)
-		return;
-	down(&port->sem);
-
-	mydbg("%s - port %d\n", __func__, port->number);
-
-	if (!port->open_count) {
-		mydbg("%s - port not open\n", __func__);
-		goto exit;
-	}
-
-	if (port->RxHolding == 1) {
-		mydbg("%s -port->RxHolding == 1\n", __func__);
-
-		port->RxHolding = 0;
-		mydbg("%s - port->RxHolding = 0\n", __func__);
-
-		/* if we have a bulk endpoint, start it up */
-		if ((serial->num_bulk_in) && (port->ReadBulkStopped == 1)) {
-			/* Start reading from the device */
-			usb_fill_bulk_urb(port->read_urb, serial->dev,
-					  usb_rcvbulkpipe(serial->dev,
-							  port->
-							  bulk_in_endpointAddress),
-					  port->read_urb->transfer_buffer,
-					  port->read_urb->
-					  transfer_buffer_length,
-					  qt_read_bulk_callback, port);
-			result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
-			if (result)
-				err("%s - failed restarting read urb, error %d",
-				    __func__, result);
-		}
-	}
-exit:
-	up(&port->sem);
-	return;
-
-}
-
-static int serial_break(struct tty_struct *tty, int break_state)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct usb_serial *serial = get_usb_serial(port, __func__);
-	u16 index, onoff;
-	unsigned int result;
-
-	index = tty->index - serial->minor;
-	if (!serial)
-		return -ENODEV;
-
-	if (break_state == -1)
-		onoff = 1;
-	else
-		onoff = 0;
-
-	down(&port->sem);
-
-	mydbg("%s - port %d\n", __func__, port->number);
-
-	if (!port->open_count) {
-		mydbg("%s - port not open\n", __func__);
-		goto exit;
-	}
-
-	result =
-	    usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-			    QT_BREAK_CONTROL, 0x40, onoff, index,
-			    NULL, 0, 300);
-
-exit:
-	up(&port->sem);
-	return 0;
-}
-
-static int ioctl_serial_usb(struct inode *innod, struct file *filp, unsigned int cmd,
-		     unsigned long arg)
-{
-
-	unsigned err;
-	unsigned ucOPR_NewValue, uc_Value;
-	int *p_Num_of_adapters, counts, index, *p_QMCR_Value;
-	struct identity *p_Identity_of;
-	struct identity Identity_of;
-	struct usb_serial *lastserial, *serial;
-
-	mydbg(KERN_DEBUG "ioctl_serial_usb  cmd =\n");
-	if (_IOC_TYPE(cmd) != SERIALQT_PCI_IOC_MAGIC)
-		return -ENOTTY;
-	if (_IOC_NR(cmd) > SERIALQT_IOC_MAXNR)
-		return -ENOTTY;
-	mydbg(KERN_DEBUG "ioctl_serial_usb  cmd = 0x%x\n", cmd);
-	err = 0;
-	switch (cmd) {
-
-	case SERIALQT_WRITE_QMCR:
-		err = -ENOTTY;
-		index = arg >> 16;
-		counts = 0;
-
-		ucOPR_NewValue = arg;
-
-		err = EmulateWriteQMCR_Reg(index, ucOPR_NewValue);
-		break;
-
-	case SERIALQT_READ_QMCR:
-		err = -ENOTTY;
-		p_QMCR_Value = (int *)arg;
-		index = arg >> 16;
-		counts = 0;
-
-		err = EmulateReadQMCR_Reg(index, &uc_Value);
-		if (err == 0)
-			err = put_user(uc_Value, p_QMCR_Value);
-		break;
-
-	case SERIALQT_GET_NUMOF_UNITS:
-		p_Num_of_adapters = (int *)arg;
-		counts = 0;	/* Initialize counts to zero */
-		/* struct usb_serial *lastserial = serial_table[0], *serial; */
-		lastserial = serial_table[0];
-
-		mydbg(KERN_DEBUG "SERIALQT_GET_NUMOF_UNITS \n");
-		/* if first pointer is nonull, we at least have one box */
-		if (lastserial)
-			counts = 1;	/* we at least have one box */
-
-		for (index = 1; index < SERIAL_TTY_MINORS; index++) {
-			serial = serial_table[index];
-			if (serial) {
-				if (serial != lastserial) {
-					/* we had a change in the array, hence
-					 * another box is there */
-					lastserial = serial;
-					counts++;
-				}
-			} else
-				break;
-		}
-
-		mydbg(KERN_DEBUG "ioctl_serial_usb writting counts = %d",
-		      counts);
-
-		err = put_user(counts, p_Num_of_adapters);
-
-		break;
-	case SERIALQT_GET_THIS_UNIT:
-		counts = 0;
-		p_Identity_of = (struct identity *)arg;
-		/* copy user structure to local variable */
-		get_user(Identity_of.index, &p_Identity_of->index);
-		mydbg(KERN_DEBUG "SERIALQT_GET_THIS_UNIT Identity_of.index\n");
-		mydbg(KERN_DEBUG
-		      "SERIALQT_GET_THIS_UNIT Identity_of.index= 0x%x\n",
-		      Identity_of.index);
-
-		err = -ENOTTY;
-		serial = find_the_box(Identity_of.index);
-		if (serial) {
-			err =
-			    put_user(serial->product,
-				     &p_Identity_of->n_identity);
-
-		}
-		break;
-
-	case SERIALQT_IS422_EXTENDED:
-		err = -ENOTTY;
-		mydbg(KERN_DEBUG "SERIALQT_IS422_EXTENDED \n");
-		index = arg >> 16;
-
-		counts = 0;
-
-		mydbg(KERN_DEBUG
-		      "SERIALQT_IS422_EXTENDED, looking Identity_of.indext = 0x%x\n",
-		      index);
-		serial = find_the_box(index);
-		if (serial) {
-			mydbg("%s index = 0x%x, serial = 0x%p\n", __func__,
-			      index, serial);
-			for (counts = 0; serqt_422_table[counts] != 0; counts++) {
-
-				mydbg
-				    ("%s serial->product = = 0x%x, serqt_422_table[counts] = 0x%x\n",
-				     __func__, serial->product,
-				     serqt_422_table[counts]);
-				if (serial->product == serqt_422_table[counts]) {
-					err = 0;
-
-					mydbg
-					    ("%s found match for 422extended\n",
-					     __func__);
-					break;
-				}
-			}
-		}
-		break;
-
-	default:
-		err = -ENOTTY;
-	}
-
-	mydbg("%s returning err = 0x%x\n", __func__, err);
-	return err;
-}
-
-static struct usb_serial *find_the_box(unsigned int index)
-{
-	struct usb_serial *lastserial, *foundserial, *serial;
-	int counts = 0, index2;
-	lastserial = serial_table[0];
-	foundserial = NULL;
-	for (index2 = 0; index2 < SERIAL_TTY_MINORS; index2++) {
-		serial = serial_table[index2];
-
-		mydbg("%s index = 0x%x, index2 = 0x%x, serial = 0x%p\n",
-		      __func__, index, index2, serial);
-
-		if (serial) {
-			/* first see if this is the unit we'er looking for */
-			mydbg
-			    ("%s inside if(serial) counts = 0x%x , index = 0x%x\n",
-			     __func__, counts, index);
-			if (counts == index) {
-				/* we found the one we're looking for, copythe
-				 * product Id to user */
-				mydbg("%s we found the one we're looking for serial = 0x%p\n",
-				     __func__, serial);
-				foundserial = serial;
-				break;
-			}
-
-			if (serial != lastserial) {
-				/* when we have a change in the pointer */
-				lastserial = serial;
-				counts++;
-			}
-		} else
-			break;	/* no matches */
-	}
-
-	mydbg("%s returning foundserial = 0x%p\n", __func__, foundserial);
-	return foundserial;
-}
-
-static int EmulateWriteQMCR_Reg(int index, unsigned uc_value)
-{
-
-	__u16 ATC_Mode = 0;
-	struct usb_serial *serial;
-	int status;
-	struct qt_get_device_data DeviceData;
-	unsigned uc_temp = 0;
-	mydbg("Inside %s, uc_value = 0x%x\n", __func__, uc_value);
-
-	DeviceData.porta = 0;
-	DeviceData.portb = 0;
-	serial = find_the_box(index);
-	/* Determine Duplex mode */
-	if (!(serial))
-		return -ENOTTY;
-	status = box_get_device(serial, &DeviceData);
-	if (status < 0) {
-		mydbg(__FILE__ "box_set_device failed\n");
-		return status;
-	}
-
-	uc_temp = uc_value & QMCR_HALF_DUPLEX_MASK;
-	switch (uc_temp) {
-	case QMCR_FULL_DUPLEX:
-		DeviceData.porta &= ~DUPMODE_BITS;
-		DeviceData.porta |= FULL_DUPLEX;
-		ATC_Mode = ATC_DISABLED;
-		break;
-	case QMCR_HALF_DUPLEX_RTS:
-		DeviceData.porta &= ~DUPMODE_BITS;
-		DeviceData.porta |= HALF_DUPLEX_RTS;
-		ATC_Mode = ATC_RTS_ENABLED;
-		break;
-	case QMCR_HALF_DUPLEX_DTR:
-		DeviceData.porta &= ~DUPMODE_BITS;
-		DeviceData.porta |= HALF_DUPLEX_DTR;
-		ATC_Mode = ATC_DTR_ENABLED;
-		break;
-	default:
-		break;
-	}
-
-	uc_temp = uc_value & QMCR_CONNECTOR_MASK;
-	switch (uc_temp) {
-	case QMCR_MODEM_CONTROL:
-		DeviceData.portb &= ~LOOPMODE_BITS;	/* reset connection bits */
-		DeviceData.portb |= MODEM_CTRL;
-		break;
-	case QMCR_ALL_LOOPBACK:
-		DeviceData.portb &= ~LOOPMODE_BITS;	/* reset connection bits */
-		DeviceData.portb |= ALL_LOOPBACK;
-		break;
-	}
-
-	mydbg(__FILE__ "Calling box_set_device with failed\n");
-	status = box_set_device(serial, &DeviceData);
-	if (status < 0) {
-		mydbg(__FILE__ "box_set_device failed\n");
-		return status;
-	}
-
-	/* This bit (otherwise unused) i'll used  to detect whether ATC is
-	 * selected */
-	if (uc_value & QMCR_RX_EN_MASK) {
-
-		mydbg(__FILE__
-		      "calling BoxsetATC with DeviceData.porta = 0x%x and DeviceData.portb = 0x%x\n",
-		      DeviceData.porta, DeviceData.portb);
-		status = BoxSetATC(serial, ATC_Mode);
-		if (status < 0) {
-			mydbg(__FILE__ "BoxSetATC failed\n");
-			return status;
-		}
-	} else {
-
-		mydbg(__FILE__
-		      "calling BoxsetATC with DeviceData.porta = 0x%x and DeviceData.portb = 0x%x\n",
-		      DeviceData.porta, DeviceData.portb);
-		status = BoxSetATC(serial, ATC_DISABLED);
-		if (status < 0) {
-			mydbg(__FILE__ "BoxSetATC failed\n");
-			return status;
-		}
-	}
-
-	return 0;
-
-}
-
-static int EmulateReadQMCR_Reg(int index, unsigned *uc_value)
-{
-	struct usb_serial *serial;
-	int status;
-	struct qt_get_device_data DeviceData;
-	__u8 uc_temp;
-
-	*uc_value = 0;
-
-	serial = find_the_box(index);
-	if (!(serial))
-		return -ENOTTY;
-
-	status = box_get_device(serial, &DeviceData);
-	if (status < 0) {
-		mydbg(__FILE__ "box_get_device failed\n");
-		return status;
-	}
-	uc_temp = DeviceData.porta & DUPMODE_BITS;
-	switch (uc_temp) {
-	case FULL_DUPLEX:
-		*uc_value |= QMCR_FULL_DUPLEX;
-		break;
-	case HALF_DUPLEX_RTS:
-		*uc_value |= QMCR_HALF_DUPLEX_RTS;
-		break;
-	case HALF_DUPLEX_DTR:
-		*uc_value |= QMCR_HALF_DUPLEX_DTR;
-		break;
-	default:
-		break;
-	}
-
-	/* I use this for ATC control se */
-	uc_temp = DeviceData.portb & LOOPMODE_BITS;
-
-	switch (uc_temp) {
-	case ALL_LOOPBACK:
-		*uc_value |= QMCR_ALL_LOOPBACK;
-		break;
-	case MODEM_CTRL:
-		*uc_value |= QMCR_MODEM_CONTROL;
-		break;
-	default:
-		break;
-
-	}
-	return 0;
-
-}
-
-static int __init serqt_usb_init(void)
-{
-	int i, result;
-	int status = 0;
-
-	mydbg("%s\n", __func__);
-	tty_set_operations(&serial_tty_driver, &serial_ops);
-	result = tty_register_driver(&serial_tty_driver);
-	if (result) {
-		mydbg("tty_register_driver failed error = 0x%x", result);
-		return result;
-	}
-
-	/* Initalize our global data */
-	for (i = 0; i < SERIAL_TTY_MINORS; ++i)
-		serial_table[i] = NULL;
-
-	/* register this driver with the USB subsystem */
-	result = usb_register(&serqt_usb_driver);
-	if (result < 0) {
-		err("usb_register failed for the " __FILE__
-		    " driver. Error number %d", result);
-		return result;
-	}
-	status = 0;		/* Dynamic assignment of major number */
-	major_number =
-	    register_chrdev(status, "SerialQT_USB", &serialqt_usb_fops);
-	if (major_number < 0) {
-		mydbg(KERN_DEBUG "No devices found \n\n");
-		return -EBUSY;
-	} else
-		mydbg(KERN_DEBUG "SerQT_USB major number assignment = %d \n\n",
-		      major_number);
-
-	printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION);
-	return 0;
-}
-
-static void __exit serqt_usb_exit(void)
-{
-	/* deregister this driver with the USB subsystem */
-	usb_deregister(&serqt_usb_driver);
-	tty_unregister_driver(&serial_tty_driver);
-	unregister_chrdev(major_number, "SerialQT_USB");
-}
-
-module_init(serqt_usb_init);
-module_exit(serqt_usb_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/serqt_usb/Kconfig b/drivers/staging/serqt_usb2/Kconfig
index cc1af5df40d..f4fed40e23d 100644
--- a/drivers/staging/serqt_usb/Kconfig
+++ b/drivers/staging/serqt_usb2/Kconfig
@@ -1,4 +1,4 @@
-config USB_SERIAL_QUATECH_ESU100
+config USB_SERIAL_QUATECH2
 	tristate "USB Quatech ESU-100 8 Port Serial Driver"
 	depends on USB_SERIAL
 	help
@@ -6,4 +6,4 @@ config USB_SERIAL_QUATECH_ESU100
 	  serial adapter.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called serqt_usb.
+	  module will be called serqt_usb2.
diff --git a/drivers/staging/serqt_usb2/Makefile b/drivers/staging/serqt_usb2/Makefile
new file mode 100644
index 00000000000..21578617f7e
--- /dev/null
+++ b/drivers/staging/serqt_usb2/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_USB_SERIAL_QUATECH2)		+= serqt_usb2.o
diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c
new file mode 100644
index 00000000000..90b29b56463
--- /dev/null
+++ b/drivers/staging/serqt_usb2/serqt_usb2.c
@@ -0,0 +1,1655 @@
+/*
+ * This code was developed for the Quatech USB line for linux, it used
+ * much of the code developed by Greg Kroah-Hartman for USB serial devices
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/serial.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/uaccess.h>
+
+static int debug;
+
+/* Version Information */
+#define DRIVER_VERSION "v2.14"
+#define DRIVER_AUTHOR "Tim Gobeli, Quatech, Inc"
+#define DRIVER_DESC "Quatech USB to Serial Driver"
+
+#define	USB_VENDOR_ID_QUATECH			0x061d	/* Quatech VID */
+#define QUATECH_SSU100	0xC020	/* SSU100 */
+#define QUATECH_SSU200	0xC030	/* SSU200 */
+#define QUATECH_DSU100	0xC040	/* DSU100 */
+#define QUATECH_DSU200	0xC050	/* DSU200 */
+#define QUATECH_QSU100	0xC060	/* QSU100 */
+#define QUATECH_QSU200	0xC070	/* QSU200 */
+#define QUATECH_ESU100A	0xC080	/* ESU100A */
+#define QUATECH_ESU100B	0xC081	/* ESU100B */
+#define QUATECH_ESU200A	0xC0A0	/* ESU200A */
+#define QUATECH_ESU200B	0xC0A1	/* ESU200B */
+#define QUATECH_HSU100A	0xC090	/* HSU100A */
+#define QUATECH_HSU100B	0xC091	/* HSU100B */
+#define QUATECH_HSU100C	0xC092	/* HSU100C */
+#define QUATECH_HSU100D	0xC093	/* HSU100D */
+#define QUATECH_HSU200A	0xC0B0	/* HSU200A */
+#define QUATECH_HSU200B	0xC0B1	/* HSU200B */
+#define QUATECH_HSU200C	0xC0B2	/* HSU200C */
+#define QUATECH_HSU200D	0xC0B3	/* HSU200D */
+#define QUATECH_SSU100_2  0xC120	/* SSU100_2 */
+#define QUATECH_DSU100_2  0xC140	/* DSU100_2 */
+#define QUATECH_DSU400_2  0xC150	/* DSU400_2 */
+#define QUATECH_QSU100_2  0xC160	/* QSU100_2 */
+#define QUATECH_QSU400_2  0xC170	/* QSU400_2 */
+#define QUATECH_ESU400_2  0xC180	/* ESU400_2 */
+#define QUATECH_ESU100_2  0xC1A0	/* ESU100_2 */
+
+#define QT_SET_GET_DEVICE           0xc2
+#define QT_OPEN_CLOSE_CHANNEL       0xca
+#define QT_GET_SET_PREBUF_TRIG_LVL  0xcc
+#define QT_SET_ATF                  0xcd
+#define QT_GET_SET_REGISTER         0xc0
+#define QT_GET_SET_UART             0xc1
+#define QT_HW_FLOW_CONTROL_MASK     0xc5
+#define QT_SW_FLOW_CONTROL_MASK     0xc6
+#define QT_SW_FLOW_CONTROL_DISABLE  0xc7
+#define QT_BREAK_CONTROL            0xc8
+
+#define USBD_TRANSFER_DIRECTION_IN    0xc0
+#define USBD_TRANSFER_DIRECTION_OUT   0x40
+
+#define  MAX_BAUD_RATE              460800
+#define  MAX_BAUD_REMAINDER         4608
+
+#define  DIV_LATCH_LS               0x00
+#define  XMT_HOLD_REGISTER          0x00
+#define  XVR_BUFFER_REGISTER        0x00
+#define  DIV_LATCH_MS               0x01
+#define  FIFO_CONTROL_REGISTER      0x02
+#define  LINE_CONTROL_REGISTER      0x03
+#define  MODEM_CONTROL_REGISTER     0x04
+#define  LINE_STATUS_REGISTER       0x05
+#define  MODEM_STATUS_REGISTER      0x06
+
+#define  SERIAL_MCR_DTR             0x01
+#define  SERIAL_MCR_RTS             0x02
+#define  SERIAL_MCR_LOOP            0x10
+
+#define  SERIAL_MSR_CTS             0x10
+#define  SERIAL_MSR_CD              0x80
+#define  SERIAL_MSR_RI              0x40
+#define  SERIAL_MSR_DSR             0x20
+#define  SERIAL_MSR_MASK            0xf0
+
+#define  SERIAL_8_DATA              0x03
+#define  SERIAL_7_DATA              0x02
+#define  SERIAL_6_DATA              0x01
+#define  SERIAL_5_DATA              0x00
+
+#define  SERIAL_ODD_PARITY          0X08
+#define  SERIAL_EVEN_PARITY         0X18
+#define  SERIAL_TWO_STOPB           0x04
+#define  SERIAL_ONE_STOPB           0x00
+
+#define DEFAULT_DIVISOR  0x30	/* gives 9600 baud rate */
+#define DEFAULT_LCR SERIAL_8_DATA	/* 8, none , 1 */
+
+#define FULLPWRBIT          0x00000080
+#define NEXT_BOARD_POWER_BIT        0x00000004
+
+#define SERIAL_LSR_OE       0x02
+#define SERIAL_LSR_PE       0x04
+#define SERIAL_LSR_FE       0x08
+#define SERIAL_LSR_BI       0x10
+
+#define  SERIAL_MSR_CTS             0x10
+#define  SERIAL_MSR_CD              0x80
+#define  SERIAL_MSR_RI              0x40
+#define  SERIAL_MSR_DSR             0x20
+#define  SERIAL_MSR_MASK            0xf0
+
+#define PREFUFF_LEVEL_CONSERVATIVE  128
+#define ATC_DISABLED                0x0
+
+#define RR_BITS             0x03	/* for clearing clock bits */
+#define DUPMODE_BITS        0xc0
+#define CLKS_X4             0x02
+
+#define LOOPMODE_BITS       0x41	/* LOOP1 = b6, LOOP0 = b0 (PORT B) */
+#define ALL_LOOPBACK        0x01
+#define MODEM_CTRL          0x40
+#define RS232_MODE          0x00
+
+static struct usb_device_id serqt_id_table[] = {
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU100)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU200)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU100)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU200)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU100)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU200)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU100A)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU100B)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU200A)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU200B)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU100A)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU100B)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU100C)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU100D)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU200A)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU200B)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU200C)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU200D)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU100_2)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU100_2)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU400_2)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU100_2)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU400_2)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU400_2)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU100_2)},
+	{}			/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, serqt_id_table);
+
+struct qt_get_device_data {
+	__u8 porta;
+	__u8 portb;
+	__u8 portc;
+};
+
+struct qt_open_channel_data {
+	__u8 line_status;
+	__u8 modem_status;
+};
+
+struct quatech_port {
+	int port_num;		/* number of the port */
+	struct urb *write_urb;	/* write URB for this port */
+	struct urb *read_urb;	/* read URB for this port */
+	struct urb *int_urb;
+
+	__u8 shadowLCR;		/* last LCR value received */
+	__u8 shadowMCR;		/* last MCR value received */
+	__u8 shadowMSR;		/* last MSR value received */
+	__u8 shadowLSR;		/* last LSR value received */
+	char open_ports;
+
+	/* Used for TIOCMIWAIT */
+	wait_queue_head_t msr_wait;
+	char prev_status, diff_status;
+
+	wait_queue_head_t wait;
+
+	struct async_icount icount;
+
+	struct usb_serial_port *port;	/* owner of this object */
+	struct qt_get_device_data DeviceData;
+	spinlock_t lock;
+	bool read_urb_busy;
+	int RxHolding;
+	int ReadBulkStopped;
+	char closePending;
+};
+
+static struct usb_driver serqt_usb_driver = {
+	.name = "quatech-usb-serial",
+	.probe = usb_serial_probe,
+	.disconnect = usb_serial_disconnect,
+	.id_table = serqt_id_table,
+	.no_dynamic_id = 1,
+};
+
+static int port_paranoia_check(struct usb_serial_port *port,
+			       const char *function)
+{
+	if (!port) {
+		dbg("%s - port == NULL", function);
+		return -1;
+	}
+	if (!port->serial) {
+		dbg("%s - port->serial == NULL\n", function);
+		return -1;
+	}
+
+	return 0;
+}
+
+static int serial_paranoia_check(struct usb_serial *serial,
+				 const char *function)
+{
+	if (!serial) {
+		dbg("%s - serial == NULL\n", function);
+		return -1;
+	}
+
+	if (!serial->type) {
+		dbg("%s - serial->type == NULL!", function);
+		return -1;
+	}
+
+	return 0;
+}
+
+static inline struct quatech_port *qt_get_port_private(struct usb_serial_port
+						       *port)
+{
+	return (struct quatech_port *)usb_get_serial_port_data(port);
+}
+
+static inline void qt_set_port_private(struct usb_serial_port *port,
+				       struct quatech_port *data)
+{
+	usb_set_serial_port_data(port, (void *)data);
+}
+
+static struct usb_serial *get_usb_serial(struct usb_serial_port *port,
+					 const char *function)
+{
+	/* if no port was specified, or it fails a paranoia check */
+	if (!port ||
+	    port_paranoia_check(port, function) ||
+	    serial_paranoia_check(port->serial, function)) {
+		/*
+		 * then say that we dont have a valid usb_serial thing,
+		 * which will end up genrating -ENODEV return values
+		 */
+		return NULL;
+	}
+
+	return port->serial;
+}
+
+static void ProcessLineStatus(struct quatech_port *qt_port,
+			      unsigned char line_status)
+{
+
+	qt_port->shadowLSR =
+	    line_status & (SERIAL_LSR_OE | SERIAL_LSR_PE | SERIAL_LSR_FE |
+			   SERIAL_LSR_BI);
+	return;
+}
+
+static void ProcessModemStatus(struct quatech_port *qt_port,
+			       unsigned char modem_status)
+{
+
+	qt_port->shadowMSR = modem_status;
+	wake_up_interruptible(&qt_port->wait);
+	return;
+}
+
+static void ProcessRxChar(struct tty_struct *tty, struct usb_serial_port *port,
+						unsigned char data)
+{
+	struct urb *urb = port->read_urb;
+	if (urb->actual_length)
+		tty_insert_flip_char(tty, data, TTY_NORMAL);
+}
+
+static void qt_write_bulk_callback(struct urb *urb)
+{
+	struct tty_struct *tty;
+	int status;
+	struct quatech_port *quatech_port;
+
+	status = urb->status;
+
+	if (status) {
+		dbg("nonzero write bulk status received:%d\n", status);
+		return;
+	}
+
+	quatech_port = urb->context;
+
+	dbg("%s - port %d\n", __func__, quatech_port->port_num);
+
+	tty = tty_port_tty_get(&quatech_port->port->port);
+
+	if (tty)
+		tty_wakeup(tty);
+	tty_kref_put(tty);
+}
+
+static void qt_interrupt_callback(struct urb *urb)
+{
+	/* FIXME */
+}
+
+static void qt_read_bulk_callback(struct urb *urb)
+{
+
+	struct usb_serial_port *port = urb->context;
+	struct usb_serial *serial = get_usb_serial(port, __func__);
+	struct quatech_port *qt_port = qt_get_port_private(port);
+	unsigned char *data;
+	struct tty_struct *tty;
+	unsigned int index;
+	unsigned int RxCount;
+	int i, result;
+	int flag, flag_data;
+
+	if (urb->status) {
+		qt_port->ReadBulkStopped = 1;
+		dbg("%s - nonzero write bulk status received: %d\n",
+		    __func__, urb->status);
+		return;
+	}
+
+	tty = tty_port_tty_get(&port->port);
+	if (!tty) {
+		dbg("%s - bad tty pointer - exiting", __func__);
+		return;
+	}
+
+	data = urb->transfer_buffer;
+
+	RxCount = urb->actual_length;
+
+	/* index = MINOR(port->tty->device) - serial->minor; */
+	index = tty->index - serial->minor;
+
+	dbg("%s - port %d\n", __func__, port->number);
+	dbg("%s - port->RxHolding = %d\n", __func__, qt_port->RxHolding);
+
+	if (port_paranoia_check(port, __func__) != 0) {
+		dbg("%s - port_paranoia_check, exiting\n", __func__);
+		qt_port->ReadBulkStopped = 1;
+		return;
+	}
+
+	if (!serial) {
+		dbg("%s - bad serial pointer, exiting\n", __func__);
+		return;
+	}
+	if (qt_port->closePending == 1) {
+		/* Were closing , stop reading */
+		dbg("%s - (qt_port->closepending == 1\n", __func__);
+		qt_port->ReadBulkStopped = 1;
+		return;
+	}
+
+	/*
+	 * RxHolding is asserted by throttle, if we assert it, we're not
+	 * receiving any more characters and let the box handle the flow
+	 * control
+	 */
+	if (qt_port->RxHolding == 1) {
+		qt_port->ReadBulkStopped = 1;
+		return;
+	}
+
+	if (urb->status) {
+		qt_port->ReadBulkStopped = 1;
+
+		dbg("%s - nonzero read bulk status received: %d\n",
+		    __func__, urb->status);
+		return;
+	}
+
+	if (tty && RxCount) {
+		flag_data = 0;
+		for (i = 0; i < RxCount; ++i) {
+			/* Look ahead code here */
+			if ((i <= (RxCount - 3)) && (data[i] == 0x1b)
+			    && (data[i + 1] == 0x1b)) {
+				flag = 0;
+				switch (data[i + 2]) {
+				case 0x00:
+					/* line status change 4th byte must follow */
+					if (i > (RxCount - 4)) {
+						dbg("Illegal escape seuences in received data\n");
+						break;
+					}
+					ProcessLineStatus(qt_port, data[i + 3]);
+					i += 3;
+					flag = 1;
+					break;
+
+				case 0x01:
+					/* Modem status status change 4th byte must follow */
+					dbg("Modem status status. \n");
+					if (i > (RxCount - 4)) {
+						dbg("Illegal escape sequences in received data\n");
+						break;
+					}
+					ProcessModemStatus(qt_port,
+							   data[i + 3]);
+					i += 3;
+					flag = 1;
+					break;
+				case 0xff:
+					dbg("No status sequence. \n");
+
+					if (tty) {
+						ProcessRxChar(tty, port, data[i]);
+						ProcessRxChar(tty, port, data[i + 1]);
+					}
+					i += 2;
+					break;
+				}
+				if (flag == 1)
+					continue;
+			}
+
+			if (tty && urb->actual_length)
+				tty_insert_flip_char(tty, data[i], TTY_NORMAL);
+
+		}
+		tty_flip_buffer_push(tty);
+	}
+
+	/* Continue trying to always read  */
+	usb_fill_bulk_urb(port->read_urb, serial->dev,
+			  usb_rcvbulkpipe(serial->dev,
+					  port->bulk_in_endpointAddress),
+			  port->read_urb->transfer_buffer,
+			  port->read_urb->transfer_buffer_length,
+			  qt_read_bulk_callback, port);
+	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+	if (result)
+		dbg("%s - failed resubmitting read urb, error %d",
+		    __func__, result);
+	else {
+		if (tty && RxCount) {
+			tty_flip_buffer_push(tty);
+			tty_schedule_flip(tty);
+		}
+	}
+
+	schedule_work(&port->work);
+}
+
+/*
+ * qt_get_device
+ *   Issue a GET_DEVICE vendor-specific request on the default control pipe If
+ *   successful, fills in the qt_get_device_data structure pointed to by
+ *   device_data, otherwise return a negative error number of the problem.
+ */
+
+static int qt_get_device(struct usb_serial *serial,
+			 struct qt_get_device_data *device_data)
+{
+	int result;
+	unsigned char *transfer_buffer;
+
+	transfer_buffer =
+	    kmalloc(sizeof(struct qt_get_device_data), GFP_KERNEL);
+	if (!transfer_buffer)
+		return -ENOMEM;
+
+	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+				 QT_SET_GET_DEVICE, 0xc0, 0, 0,
+				 transfer_buffer,
+				 sizeof(struct qt_get_device_data), 300);
+	if (result > 0)
+		memcpy(device_data, transfer_buffer,
+		       sizeof(struct qt_get_device_data));
+	kfree(transfer_buffer);
+
+	return result;
+}
+
+/****************************************************************************
+ *  BoxSetPrebufferLevel
+   TELLS BOX WHEN TO ASSERT FLOW CONTROL
+ ****************************************************************************/
+static int BoxSetPrebufferLevel(struct usb_serial *serial)
+{
+	int result;
+	__u16 buffer_length;
+
+	buffer_length = PREFUFF_LEVEL_CONSERVATIVE;
+	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+				 QT_GET_SET_PREBUF_TRIG_LVL, 0x40,
+				 buffer_length, 0, NULL, 0, 300);
+	return result;
+}
+
+/****************************************************************************
+ *  BoxSetATC
+   TELLS BOX WHEN TO ASSERT automatic transmitter control
+   ****************************************************************************/
+static int BoxSetATC(struct usb_serial *serial, __u16 n_Mode)
+{
+	int result;
+	__u16 buffer_length;
+
+	buffer_length = PREFUFF_LEVEL_CONSERVATIVE;
+
+	result =
+	    usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			    QT_SET_ATF, 0x40, n_Mode, 0, NULL, 0, 300);
+
+	return result;
+}
+
+/**
+ * qt_set_device
+ *   Issue a SET_DEVICE vendor-specific request on the default control pipe If
+ *   successful returns the number of bytes written, otherwise it returns a
+ *   negative error number of the problem.
+ */
+static int qt_set_device(struct usb_serial *serial,
+			 struct qt_get_device_data *device_data)
+{
+	int result;
+	__u16 length;
+	__u16 PortSettings;
+
+	PortSettings = ((__u16) (device_data->portb));
+	PortSettings = (PortSettings << 8);
+	PortSettings += ((__u16) (device_data->porta));
+
+	length = sizeof(struct qt_get_device_data);
+	dbg("%s - PortSettings = 0x%x\n", __func__, PortSettings);
+
+	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+				 QT_SET_GET_DEVICE, 0x40, PortSettings,
+				 0, NULL, 0, 300);
+	return result;
+}
+
+static int qt_open_channel(struct usb_serial *serial, __u16 Uart_Number,
+			   struct qt_open_channel_data *pDeviceData)
+{
+	int result;
+
+	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+				 QT_OPEN_CLOSE_CHANNEL,
+				 USBD_TRANSFER_DIRECTION_IN, 1, Uart_Number,
+				 pDeviceData,
+				 sizeof(struct qt_open_channel_data), 300);
+
+	return result;
+
+}
+
+static int qt_close_channel(struct usb_serial *serial, __u16 Uart_Number)
+{
+	int result;
+
+	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+				 QT_OPEN_CLOSE_CHANNEL,
+				 USBD_TRANSFER_DIRECTION_OUT, 0, Uart_Number,
+				 NULL, 0, 300);
+
+	return result;
+
+}
+
+/****************************************************************************
+* BoxGetRegister
+*	issuse a GET_REGISTER vendor-spcific request on the default control pipe
+*	If successful, fills in the  pValue with the register value asked for
+****************************************************************************/
+static int BoxGetRegister(struct usb_serial *serial, unsigned short Uart_Number,
+			  unsigned short Register_Num, __u8 *pValue)
+{
+	int result;
+	__u16 current_length;
+
+	current_length = sizeof(struct qt_get_device_data);
+
+	result =
+	    usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+			    QT_GET_SET_REGISTER, 0xC0, Register_Num,
+			    Uart_Number, (void *)pValue, sizeof(*pValue), 300);
+
+	return result;
+}
+
+/****************************************************************************
+* BoxSetRegister
+*	issuse a GET_REGISTER vendor-spcific request on the default control pipe
+*	If successful, fills in the  pValue with the register value asked for
+****************************************************************************/
+static int BoxSetRegister(struct usb_serial *serial, unsigned short Uart_Number,
+			  unsigned short Register_Num, unsigned short Value)
+{
+	int result;
+	unsigned short RegAndByte;
+
+	RegAndByte = Value;
+	RegAndByte = RegAndByte << 8;
+	RegAndByte = RegAndByte + Register_Num;
+
+/*
+	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+				 QT_GET_SET_REGISTER, 0xC0, Register_Num,
+				 Uart_Number, NULL, 0, 300);
+*/
+
+	result =
+	    usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			    QT_GET_SET_REGISTER, 0x40, RegAndByte, Uart_Number,
+			    NULL, 0, 300);
+
+	return result;
+}
+
+/*
+ * qt_setuart
+ * issuse a SET_UART vendor-spcific request on the default control pipe
+ * If successful sets baud rate divisor and LCR value
+ */
+static int qt_setuart(struct usb_serial *serial, unsigned short Uart_Number,
+		      unsigned short default_divisor, unsigned char default_LCR)
+{
+	int result;
+	unsigned short UartNumandLCR;
+
+	UartNumandLCR = (default_LCR << 8) + Uart_Number;
+
+	result =
+	    usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			    QT_GET_SET_UART, 0x40, default_divisor,
+			    UartNumandLCR, NULL, 0, 300);
+
+	return result;
+}
+
+static int BoxSetHW_FlowCtrl(struct usb_serial *serial, unsigned int index,
+			     int bSet)
+{
+	__u8 mcr = 0;
+	__u8 msr = 0, MOUT_Value = 0;
+	unsigned int status;
+
+	if (bSet == 1) {
+		/* flow control, box will clear RTS line to prevent remote */
+		mcr = SERIAL_MCR_RTS;
+	} /* device from xmitting more chars */
+	else {
+		/* no flow control to remote device */
+		mcr = 0;
+
+	}
+	MOUT_Value = mcr << 8;
+
+	if (bSet == 1) {
+		/* flow control, box will inhibit xmit data if CTS line is
+		 * asserted */
+		msr = SERIAL_MSR_CTS;
+	} else {
+		/* Box will not inhimbe xmit data due to CTS line */
+		msr = 0;
+	}
+	MOUT_Value |= msr;
+
+	status =
+	    usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			    QT_HW_FLOW_CONTROL_MASK, 0x40, MOUT_Value,
+			    index, NULL, 0, 300);
+	return status;
+
+}
+
+static int BoxSetSW_FlowCtrl(struct usb_serial *serial, __u16 index,
+			     unsigned char stop_char, unsigned char start_char)
+{
+	__u16 nSWflowout;
+	int result;
+
+	nSWflowout = start_char << 8;
+	nSWflowout = (unsigned short)stop_char;
+
+	result =
+	    usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			    QT_SW_FLOW_CONTROL_MASK, 0x40, nSWflowout,
+			    index, NULL, 0, 300);
+	return result;
+
+}
+
+static int BoxDisable_SW_FlowCtrl(struct usb_serial *serial, __u16 index)
+{
+	int result;
+
+	result =
+	    usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			    QT_SW_FLOW_CONTROL_DISABLE, 0x40, 0, index,
+			    NULL, 0, 300);
+	return result;
+
+}
+
+static int qt_startup(struct usb_serial *serial)
+{
+	struct usb_serial_port *port;
+	struct quatech_port *qt_port;
+	struct qt_get_device_data DeviceData;
+	int i;
+	int status;
+
+	dbg("enterting %s", __func__);
+
+	/* Now setup per port private data */
+	for (i = 0; i < serial->num_ports; i++) {
+		port = serial->port[i];
+		qt_port = kzalloc(sizeof(*qt_port), GFP_KERNEL);
+		if (!qt_port) {
+			dbg("%s: kmalloc for quatech_port (%d) failed!.",
+			    __func__, i);
+			return -ENOMEM;
+		}
+		spin_lock_init(&qt_port->lock);
+
+		usb_set_serial_port_data(port, qt_port);
+
+	}
+
+	status = qt_get_device(serial, &DeviceData);
+	if (status < 0) {
+		dbg(__FILE__ "box_get_device failed");
+		goto startup_error;
+	}
+
+	dbg(__FILE__ "DeviceData.portb = 0x%x", DeviceData.portb);
+
+	DeviceData.portb &= ~FULLPWRBIT;
+	dbg(__FILE__ "Changing DeviceData.portb to 0x%x", DeviceData.portb);
+
+	status = qt_set_device(serial, &DeviceData);
+	if (status < 0) {
+		dbg(__FILE__ "qt_set_device failed\n");
+		goto startup_error;
+	}
+
+	status = qt_get_device(serial, &DeviceData);
+	if (status < 0) {
+		dbg(__FILE__ "qt_get_device failed");
+		goto startup_error;
+	}
+
+	switch (serial->dev->descriptor.idProduct) {
+	case QUATECH_SSU100:
+	case QUATECH_DSU100:
+	case QUATECH_QSU100:
+	case QUATECH_ESU100A:
+	case QUATECH_ESU100B:
+	case QUATECH_HSU100A:
+	case QUATECH_HSU100B:
+	case QUATECH_HSU100C:
+	case QUATECH_HSU100D:
+		DeviceData.porta &= ~(RR_BITS | DUPMODE_BITS);
+		DeviceData.porta |= CLKS_X4;
+		DeviceData.portb &= ~(LOOPMODE_BITS);
+		DeviceData.portb |= RS232_MODE;
+		break;
+
+	case QUATECH_SSU200:
+	case QUATECH_DSU200:
+	case QUATECH_QSU200:
+	case QUATECH_ESU200A:
+	case QUATECH_ESU200B:
+	case QUATECH_HSU200A:
+	case QUATECH_HSU200B:
+	case QUATECH_HSU200C:
+	case QUATECH_HSU200D:
+		DeviceData.porta &= ~(RR_BITS | DUPMODE_BITS);
+		DeviceData.porta |= CLKS_X4;
+		DeviceData.portb &= ~(LOOPMODE_BITS);
+		DeviceData.portb |= ALL_LOOPBACK;
+		break;
+	default:
+		DeviceData.porta &= ~(RR_BITS | DUPMODE_BITS);
+		DeviceData.porta |= CLKS_X4;
+		DeviceData.portb &= ~(LOOPMODE_BITS);
+		DeviceData.portb |= RS232_MODE;
+		break;
+
+	}
+
+	status = BoxSetPrebufferLevel(serial);	/* sets to default value */
+	if (status < 0) {
+		dbg(__FILE__ "BoxSetPrebufferLevel failed\n");
+		goto startup_error;
+	}
+
+	status = BoxSetATC(serial, ATC_DISABLED);
+	if (status < 0) {
+		dbg(__FILE__ "BoxSetATC failed\n");
+		goto startup_error;
+	}
+
+	dbg(__FILE__ "DeviceData.portb = 0x%x", DeviceData.portb);
+
+	DeviceData.portb |= NEXT_BOARD_POWER_BIT;
+	dbg(__FILE__ "Changing DeviceData.portb to 0x%x", DeviceData.portb);
+
+	status = qt_set_device(serial, &DeviceData);
+	if (status < 0) {
+		dbg(__FILE__ "qt_set_device failed\n");
+		goto startup_error;
+	}
+
+	dbg("Exit Success %s\n", __func__);
+
+	return 0;
+
+startup_error:
+	for (i = 0; i < serial->num_ports; i++) {
+		port = serial->port[i];
+		qt_port = qt_get_port_private(port);
+		kfree(qt_port);
+		usb_set_serial_port_data(port, NULL);
+	}
+
+	dbg("Exit fail %s\n", __func__);
+
+	return -EIO;
+}
+
+static void qt_release(struct usb_serial *serial)
+{
+	struct usb_serial_port *port;
+	struct quatech_port *qt_port;
+	int i;
+
+	dbg("enterting %s", __func__);
+
+	for (i = 0; i < serial->num_ports; i++) {
+		port = serial->port[i];
+		if (!port)
+			continue;
+
+		qt_port = usb_get_serial_port_data(port);
+		kfree(qt_port);
+		usb_set_serial_port_data(port, NULL);
+	}
+
+}
+
+int qt_open(struct tty_struct *tty,
+	    struct usb_serial_port *port, struct file *filp)
+{
+	struct usb_serial *serial;
+	struct quatech_port *quatech_port;
+	struct quatech_port *port0;
+	struct qt_open_channel_data ChannelData;
+
+	int result;
+
+	if (port_paranoia_check(port, __func__))
+		return -ENODEV;
+
+	dbg("%s - port %d\n", __func__, port->number);
+
+	serial = port->serial;
+
+	if (serial_paranoia_check(serial, __func__))
+		return -ENODEV;
+
+	quatech_port = qt_get_port_private(port);
+	port0 = qt_get_port_private(serial->port[0]);
+
+	if (quatech_port == NULL || port0 == NULL)
+		return -ENODEV;
+
+	usb_clear_halt(serial->dev, port->write_urb->pipe);
+	usb_clear_halt(serial->dev, port->read_urb->pipe);
+	port0->open_ports++;
+
+	result = qt_get_device(serial, &port0->DeviceData);
+
+	/* Port specific setups */
+	result = qt_open_channel(serial, port->number, &ChannelData);
+	if (result < 0) {
+		dbg(__FILE__ "qt_open_channel failed\n");
+		return result;
+	}
+	dbg(__FILE__ "qt_open_channel completed.\n");
+
+/* FIXME: are these needed?  Does it even do anything useful? */
+	quatech_port->shadowLSR = ChannelData.line_status &
+	    (SERIAL_LSR_OE | SERIAL_LSR_PE | SERIAL_LSR_FE | SERIAL_LSR_BI);
+
+	quatech_port->shadowMSR = ChannelData.modem_status &
+	    (SERIAL_MSR_CTS | SERIAL_MSR_DSR | SERIAL_MSR_RI | SERIAL_MSR_CD);
+
+	/* Set Baud rate to default and turn off (default)flow control here */
+	result = qt_setuart(serial, port->number, DEFAULT_DIVISOR, DEFAULT_LCR);
+	if (result < 0) {
+		dbg(__FILE__ "qt_setuart failed\n");
+		return result;
+	}
+	dbg(__FILE__ "qt_setuart completed.\n");
+
+	/*
+	 * Put this here to make it responsive to stty and defauls set by
+	 * the tty layer
+	 */
+	/* FIXME: is this needed? */
+	/* qt_set_termios(tty, port, NULL); */
+
+	/*  Check to see if we've set up our endpoint info yet */
+	if (port0->open_ports == 1) {
+		if (serial->port[0]->interrupt_in_buffer == NULL) {
+			/* set up interrupt urb */
+			usb_fill_int_urb(serial->port[0]->interrupt_in_urb,
+					 serial->dev,
+					 usb_rcvintpipe(serial->dev,
+							serial->port[0]->interrupt_in_endpointAddress),
+					 serial->port[0]->interrupt_in_buffer,
+					 serial->port[0]->
+					 interrupt_in_urb->transfer_buffer_length,
+					 qt_interrupt_callback, serial,
+					 serial->port[0]->
+					 interrupt_in_urb->interval);
+
+			result =
+			    usb_submit_urb(serial->port[0]->interrupt_in_urb,
+					   GFP_KERNEL);
+			if (result) {
+				dev_err(&port->dev,
+					"%s - Error %d submitting "
+					"interrupt urb\n", __func__, result);
+			}
+
+		}
+
+	}
+
+	dbg("port number is %d \n", port->number);
+	dbg("serial number is %d \n", port->serial->minor);
+	dbg("Bulkin endpoint is %d \n", port->bulk_in_endpointAddress);
+	dbg("BulkOut endpoint is %d \n", port->bulk_out_endpointAddress);
+	dbg("Interrupt endpoint is %d \n", port->interrupt_in_endpointAddress);
+	dbg("port's number in the device is %d\n", quatech_port->port_num);
+	quatech_port->read_urb = port->read_urb;
+
+	/* set up our bulk in urb */
+
+	usb_fill_bulk_urb(quatech_port->read_urb,
+			  serial->dev,
+			  usb_rcvbulkpipe(serial->dev,
+					  port->bulk_in_endpointAddress),
+			  port->bulk_in_buffer,
+			  quatech_port->read_urb->transfer_buffer_length,
+			  qt_read_bulk_callback, quatech_port);
+
+	dbg("qt_open: bulkin endpoint is %d\n", port->bulk_in_endpointAddress);
+	quatech_port->read_urb_busy = true;
+	result = usb_submit_urb(quatech_port->read_urb, GFP_KERNEL);
+	if (result) {
+		dev_err(&port->dev,
+			"%s - Error %d submitting control urb\n",
+			__func__, result);
+		quatech_port->read_urb_busy = false;
+	}
+
+	/* initialize our wait queues */
+	init_waitqueue_head(&quatech_port->wait);
+	init_waitqueue_head(&quatech_port->msr_wait);
+
+	/* initialize our icount structure */
+	memset(&(quatech_port->icount), 0x00, sizeof(quatech_port->icount));
+
+	return 0;
+
+}
+
+static int qt_chars_in_buffer(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial *serial;
+	int chars = 0;
+
+	serial = get_usb_serial(port, __func__);
+
+	dbg("%s - port %d\n", __func__, port->number);
+
+	if (serial->num_bulk_out) {
+		if (port->write_urb->status == -EINPROGRESS)
+			chars = port->write_urb->transfer_buffer_length;
+	}
+
+	dbg("%s - returns %d\n", __func__, chars);
+
+	return chars;
+}
+
+static void qt_block_until_empty(struct tty_struct *tty,
+				 struct quatech_port *qt_port)
+{
+	int timeout = HZ / 10;
+	int wait = 30;
+	int count;
+
+	while (1) {
+
+		count = qt_chars_in_buffer(tty);
+
+		if (count <= 0)
+			return;
+
+		interruptible_sleep_on_timeout(&qt_port->wait, timeout);
+
+		wait--;
+		if (wait == 0) {
+			dbg("%s - TIMEOUT", __func__);
+			return;
+		} else {
+			wait = 30;
+		}
+	}
+}
+
+static void qt_close(struct tty_struct *tty, struct usb_serial_port *port,
+		     struct file *filp)
+{
+	struct usb_serial *serial = port->serial;
+	struct quatech_port *qt_port;
+	struct quatech_port *port0;
+	int status;
+	unsigned int index;
+	status = 0;
+
+	dbg("%s - port %d\n", __func__, port->number);
+	index = tty->index - serial->minor;
+
+	qt_port = qt_get_port_private(port);
+	port0 = qt_get_port_private(serial->port[0]);
+
+	/* shutdown any bulk reads that might be going on */
+	if (serial->num_bulk_out)
+		usb_unlink_urb(port->write_urb);
+	if (serial->num_bulk_in)
+		usb_unlink_urb(port->read_urb);
+
+	/* wait up to for transmitter to empty */
+	if (serial->dev)
+		qt_block_until_empty(tty, qt_port);
+
+	/* Close uart channel */
+	status = qt_close_channel(serial, index);
+	if (status < 0)
+		dbg("%s - port %d qt_close_channel failed.\n",
+		    __func__, port->number);
+
+	port0->open_ports--;
+
+	dbg("qt_num_open_ports in close%d:in port%d\n",
+	    port0->open_ports, port->number);
+
+	if (port0->open_ports == 0) {
+		if (serial->port[0]->interrupt_in_urb) {
+			dbg("%s", "Shutdown interrupt_in_urb\n");
+			usb_kill_urb(serial->port[0]->interrupt_in_urb);
+		}
+
+	}
+
+	if (qt_port->write_urb) {
+		/* if this urb had a transfer buffer already (old tx) free it */
+		if (qt_port->write_urb->transfer_buffer != NULL)
+			kfree(qt_port->write_urb->transfer_buffer);
+		usb_free_urb(qt_port->write_urb);
+	}
+
+}
+
+static int qt_write(struct tty_struct *tty, struct usb_serial_port *port,
+		    const unsigned char *buf, int count)
+{
+	int result;
+	struct usb_serial *serial = get_usb_serial(port, __func__);
+
+	if (serial == NULL)
+		return -ENODEV;
+
+	dbg("%s - port %d\n", __func__, port->number);
+
+	if (count == 0) {
+		dbg("%s - write request of 0 bytes\n", __func__);
+		return 0;
+	}
+
+	/* only do something if we have a bulk out endpoint */
+	if (serial->num_bulk_out) {
+		if (port->write_urb->status == -EINPROGRESS) {
+			dbg("%s - already writing\n", __func__);
+			return 0;
+		}
+
+		count =
+		    (count > port->bulk_out_size) ? port->bulk_out_size : count;
+		memcpy(port->write_urb->transfer_buffer, buf, count);
+
+		/* set up our urb */
+
+		usb_fill_bulk_urb(port->write_urb, serial->dev,
+				  usb_sndbulkpipe(serial->dev,
+						  port->
+						  bulk_out_endpointAddress),
+				  port->write_urb->transfer_buffer, count,
+				  qt_write_bulk_callback, port);
+
+		/* send the data out the bulk port */
+		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+		if (result)
+			dbg("%s - failed submitting write urb, error %d\n",
+			    __func__, result);
+		else
+			result = count;
+
+		return result;
+	}
+
+	/* no bulk out, so return 0 bytes written */
+	return 0;
+}
+
+static int qt_write_room(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial *serial;
+	struct quatech_port *qt_port;
+	unsigned long flags;
+
+	int retval = -EINVAL;
+
+	if (port_paranoia_check(port, __func__)) {
+		dbg("%s", "Invalid port\n");
+		return -1;
+	}
+
+	serial = get_usb_serial(port, __func__);
+
+	if (!serial)
+		return -ENODEV;
+
+	qt_port = qt_get_port_private(port);
+
+	spin_lock_irqsave(&qt_port->lock, flags);
+
+	dbg("%s - port %d\n", __func__, port->number);
+
+	if (serial->num_bulk_out) {
+		if (port->write_urb->status != -EINPROGRESS)
+			retval = port->bulk_out_size;
+	}
+
+	spin_unlock_irqrestore(&qt_port->lock, flags);
+	return retval;
+
+}
+
+static int qt_ioctl(struct tty_struct *tty, struct file *file,
+		    unsigned int cmd, unsigned long arg)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct quatech_port *qt_port = qt_get_port_private(port);
+	struct usb_serial *serial = get_usb_serial(port, __func__);
+	unsigned int index;
+
+	dbg("%s cmd 0x%04x", __func__, cmd);
+
+	index = tty->index - serial->minor;
+
+	if (cmd == TIOCMIWAIT) {
+		while (qt_port != NULL) {
+			interruptible_sleep_on(&qt_port->msr_wait);
+			if (signal_pending(current))
+				return -ERESTARTSYS;
+			else {
+				char diff = qt_port->diff_status;
+
+				if (diff == 0)
+					return -EIO;	/* no change => error */
+
+				/* Consume all events */
+				qt_port->diff_status = 0;
+
+				if (((arg & TIOCM_RNG)
+				     && (diff & SERIAL_MSR_RI))
+				    || ((arg & TIOCM_DSR)
+					&& (diff & SERIAL_MSR_DSR))
+				    || ((arg & TIOCM_CD)
+					&& (diff & SERIAL_MSR_CD))
+				    || ((arg & TIOCM_CTS)
+					&& (diff & SERIAL_MSR_CTS))) {
+					return 0;
+				}
+			}
+		}
+		return 0;
+	}
+
+	dbg("%s -No ioctl for that one.  port = %d\n", __func__, port->number);
+	return -ENOIOCTLCMD;
+}
+
+static void qt_set_termios(struct tty_struct *tty,
+			   struct usb_serial_port *port,
+			   struct ktermios *old_termios)
+{
+	struct ktermios *termios = tty->termios;
+	unsigned char new_LCR = 0;
+	unsigned int cflag = termios->c_cflag;
+	unsigned int index;
+	int baud, divisor, remainder;
+	int status;
+
+	dbg("%s", __func__);
+
+	index = tty->index - port->serial->minor;
+
+	switch (cflag) {
+	case CS5:
+		new_LCR |= SERIAL_5_DATA;
+		break;
+	case CS6:
+		new_LCR |= SERIAL_6_DATA;
+		break;
+	case CS7:
+		new_LCR |= SERIAL_7_DATA;
+		break;
+	default:
+	case CS8:
+		new_LCR |= SERIAL_8_DATA;
+		break;
+	}
+
+	/* Parity stuff */
+	if (cflag & PARENB) {
+		if (cflag & PARODD)
+			new_LCR |= SERIAL_ODD_PARITY;
+		else
+			new_LCR |= SERIAL_EVEN_PARITY;
+	}
+	if (cflag & CSTOPB)
+		new_LCR |= SERIAL_TWO_STOPB;
+	else
+		new_LCR |= SERIAL_TWO_STOPB;
+
+	dbg("%s - 4\n", __func__);
+
+	/* Thats the LCR stuff, go ahead and set it */
+	baud = tty_get_baud_rate(tty);
+	if (!baud)
+		/* pick a default, any default... */
+		baud = 9600;
+
+	dbg("%s - got baud = %d\n", __func__, baud);
+
+	divisor = MAX_BAUD_RATE / baud;
+	remainder = MAX_BAUD_RATE % baud;
+	/* Round to nearest divisor */
+	if (((remainder * 2) >= baud) && (baud != 110))
+		divisor++;
+
+	/*
+	 * Set Baud rate to default and turn off (default)flow control here
+	 */
+	status =
+	    qt_setuart(port->serial, index, (unsigned short)divisor, new_LCR);
+	if (status < 0) {
+		dbg(__FILE__ "qt_setuart failed\n");
+		return;
+	}
+
+	/* Now determine flow control */
+	if (cflag & CRTSCTS) {
+		dbg("%s - Enabling HW flow control port %d\n", __func__,
+		    port->number);
+
+		/* Enable RTS/CTS flow control */
+		status = BoxSetHW_FlowCtrl(port->serial, index, 1);
+
+		if (status < 0) {
+			dbg(__FILE__ "BoxSetHW_FlowCtrl failed\n");
+			return;
+		}
+	} else {
+		/* Disable RTS/CTS flow control */
+		dbg("%s - disabling HW flow control port %d\n", __func__,
+		    port->number);
+
+		status = BoxSetHW_FlowCtrl(port->serial, index, 0);
+		if (status < 0) {
+			dbg(__FILE__ "BoxSetHW_FlowCtrl failed\n");
+			return;
+		}
+
+	}
+
+	/* if we are implementing XON/XOFF, set the start and stop character in
+	 * the device */
+	if (I_IXOFF(tty) || I_IXON(tty)) {
+		unsigned char stop_char = STOP_CHAR(tty);
+		unsigned char start_char = START_CHAR(tty);
+		status =
+		    BoxSetSW_FlowCtrl(port->serial, index, stop_char,
+				      start_char);
+		if (status < 0)
+			dbg(__FILE__ "BoxSetSW_FlowCtrl (enabled) failed\n");
+
+	} else {
+		/* disable SW flow control */
+		status = BoxDisable_SW_FlowCtrl(port->serial, index);
+		if (status < 0)
+			dbg(__FILE__ "BoxSetSW_FlowCtrl (diabling) failed\n");
+
+	}
+	tty->termios->c_cflag &= ~CMSPAR;
+	/* FIXME: Error cases should be returning the actual bits changed only */
+}
+
+static void qt_break(struct tty_struct *tty, int break_state)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial *serial = get_usb_serial(port, __func__);
+	struct quatech_port *qt_port;
+	u16 index, onoff;
+	unsigned int result;
+	unsigned long flags;
+
+	index = tty->index - serial->minor;
+
+	qt_port = qt_get_port_private(port);
+
+	if (break_state == -1)
+		onoff = 1;
+	else
+		onoff = 0;
+
+	spin_lock_irqsave(&qt_port->lock, flags);
+
+	dbg("%s - port %d\n", __func__, port->number);
+
+	result =
+	    usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			    QT_BREAK_CONTROL, 0x40, onoff, index, NULL, 0, 300);
+
+	spin_unlock_irqrestore(&qt_port->lock, flags);
+}
+
+static inline int qt_real_tiocmget(struct tty_struct *tty,
+				   struct usb_serial_port *port,
+				   struct file *file, struct usb_serial *serial)
+{
+
+	u8 mcr;
+	u8 msr;
+	unsigned int result = 0;
+	int status;
+	unsigned int index;
+
+	dbg("%s - port %d, tty =0x%p\n", __func__, port->number, tty);
+
+	index = tty->index - serial->minor;
+	status =
+	    BoxGetRegister(port->serial, index, MODEM_CONTROL_REGISTER, &mcr);
+	if (status >= 0) {
+		status =
+		    BoxGetRegister(port->serial, index,
+				   MODEM_STATUS_REGISTER, &msr);
+
+	}
+
+	if (status >= 0) {
+		result = ((mcr & SERIAL_MCR_DTR) ? TIOCM_DTR : 0)
+		    /* DTR IS SET */
+		    | ((mcr & SERIAL_MCR_RTS) ? TIOCM_RTS : 0)
+		    /* RTS IS SET */
+		    | ((msr & SERIAL_MSR_CTS) ? TIOCM_CTS : 0)
+		    /* CTS is set */
+		    | ((msr & SERIAL_MSR_CD) ? TIOCM_CAR : 0)
+		    /* Carrier detect is set */
+		    | ((msr & SERIAL_MSR_RI) ? TIOCM_RI : 0)
+		    /* Ring indicator set */
+		    | ((msr & SERIAL_MSR_DSR) ? TIOCM_DSR : 0);
+		/* DSR is set */
+		return result;
+
+	} else
+		return -ESPIPE;
+}
+
+static inline int qt_real_tiocmset(struct tty_struct *tty,
+				   struct usb_serial_port *port,
+				   struct file *file,
+				   struct usb_serial *serial,
+				   unsigned int value)
+{
+
+	u8 mcr;
+	int status;
+	unsigned int index;
+
+	dbg("%s - port %d\n", __func__, port->number);
+
+	index = tty->index - serial->minor;
+	status =
+	    BoxGetRegister(port->serial, index, MODEM_CONTROL_REGISTER, &mcr);
+	if (status < 0)
+		return -ESPIPE;
+
+	/*
+	 * Turn off the RTS and DTR and loopbcck and then only turn on what was
+	 * asked for
+	 */
+	mcr &= ~(SERIAL_MCR_RTS | SERIAL_MCR_DTR | SERIAL_MCR_LOOP);
+	if (value & TIOCM_RTS)
+		mcr |= SERIAL_MCR_RTS;
+	if (value & TIOCM_DTR)
+		mcr |= SERIAL_MCR_DTR;
+	if (value & TIOCM_LOOP)
+		mcr |= SERIAL_MCR_LOOP;
+
+	status =
+	    BoxSetRegister(port->serial, index, MODEM_CONTROL_REGISTER, mcr);
+	if (status < 0)
+		return -ESPIPE;
+	else
+		return 0;
+}
+
+static int qt_tiocmget(struct tty_struct *tty, struct file *file)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial *serial = get_usb_serial(port, __func__);
+	struct quatech_port *qt_port = qt_get_port_private(port);
+	int retval = -ENODEV;
+	unsigned long flags;
+
+	dbg("In %s \n", __func__);
+
+	if (!serial)
+		return -ENODEV;
+
+	spin_lock_irqsave(&qt_port->lock, flags);
+
+	dbg("%s - port %d\n", __func__, port->number);
+	dbg("%s - port->RxHolding = %d\n", __func__, qt_port->RxHolding);
+
+	retval = qt_real_tiocmget(tty, port, file, serial);
+
+	spin_unlock_irqrestore(&qt_port->lock, flags);
+	return retval;
+}
+
+static int qt_tiocmset(struct tty_struct *tty, struct file *file,
+		       unsigned int set, unsigned int clear)
+{
+
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial *serial = get_usb_serial(port, __func__);
+	struct quatech_port *qt_port = qt_get_port_private(port);
+	unsigned long flags;
+	int retval = -ENODEV;
+
+	dbg("In %s \n", __func__);
+
+	if (!serial)
+		return -ENODEV;
+
+	spin_lock_irqsave(&qt_port->lock, flags);
+
+	dbg("%s - port %d \n", __func__, port->number);
+	dbg("%s - qt_port->RxHolding = %d\n", __func__, qt_port->RxHolding);
+
+	retval = qt_real_tiocmset(tty, port, file, serial, set);
+
+	spin_unlock_irqrestore(&qt_port->lock, flags);
+	return retval;
+}
+
+static void qt_throttle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial *serial = get_usb_serial(port, __func__);
+	struct quatech_port *qt_port;
+	unsigned long flags;
+
+	dbg("%s - port %d\n", __func__, port->number);
+
+	if (!serial)
+		return;
+
+	qt_port = qt_get_port_private(port);
+
+	spin_lock_irqsave(&qt_port->lock, flags);
+
+	/* pass on to the driver specific version of this function */
+	qt_port->RxHolding = 1;
+	dbg("%s - port->RxHolding = 1\n", __func__);
+
+	spin_unlock_irqrestore(&qt_port->lock, flags);
+	return;
+}
+
+static void qt_unthrottle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial *serial = get_usb_serial(port, __func__);
+	struct quatech_port *qt_port;
+	unsigned long flags;
+	unsigned int result;
+
+	if (!serial)
+		return;
+
+	qt_port = qt_get_port_private(port);
+
+	spin_lock_irqsave(&qt_port->lock, flags);
+
+	dbg("%s - port %d\n", __func__, port->number);
+
+	if (qt_port->RxHolding == 1) {
+		dbg("%s -qt_port->RxHolding == 1\n", __func__);
+
+		qt_port->RxHolding = 0;
+		dbg("%s - qt_port->RxHolding = 0\n", __func__);
+
+		/* if we have a bulk endpoint, start it up */
+		if ((serial->num_bulk_in) && (qt_port->ReadBulkStopped == 1)) {
+			/* Start reading from the device */
+			usb_fill_bulk_urb(port->read_urb, serial->dev,
+					  usb_rcvbulkpipe(serial->dev,
+							  port->bulk_in_endpointAddress),
+					  port->read_urb->transfer_buffer,
+					  port->read_urb->
+					  transfer_buffer_length,
+					  qt_read_bulk_callback, port);
+			result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+			if (result)
+				err("%s - failed restarting read urb, error %d",
+				    __func__, result);
+		}
+	}
+	spin_unlock_irqrestore(&qt_port->lock, flags);
+	return;
+
+}
+
+static int qt_calc_num_ports(struct usb_serial *serial)
+{
+	int num_ports;
+
+	dbg("numberofendpoints: %d \n",
+	    (int)serial->interface->cur_altsetting->desc.bNumEndpoints);
+	dbg("numberofendpoints: %d \n",
+	    (int)serial->interface->altsetting->desc.bNumEndpoints);
+
+	num_ports =
+	    (serial->interface->cur_altsetting->desc.bNumEndpoints - 1) / 2;
+
+	return num_ports;
+}
+
+static struct usb_serial_driver quatech_device = {
+	.driver = {
+		   .owner = THIS_MODULE,
+		   .name = "serqt",
+		   },
+	.description = DRIVER_DESC,
+	.usb_driver = &serqt_usb_driver,
+	.id_table = serqt_id_table,
+	.num_ports = 8,
+	.open = qt_open,
+	.close = qt_close,
+	.write = qt_write,
+	.write_room = qt_write_room,
+	.chars_in_buffer = qt_chars_in_buffer,
+	.throttle = qt_throttle,
+	.unthrottle = qt_unthrottle,
+	.calc_num_ports = qt_calc_num_ports,
+	.ioctl = qt_ioctl,
+	.set_termios = qt_set_termios,
+	.break_ctl = qt_break,
+	.tiocmget = qt_tiocmget,
+	.tiocmset = qt_tiocmset,
+	.attach = qt_startup,
+	.release = qt_release,
+};
+
+static int __init serqt_usb_init(void)
+{
+	int retval;
+
+	dbg("%s\n", __func__);
+
+	/* register with usb-serial */
+	retval = usb_serial_register(&quatech_device);
+
+	if (retval)
+		goto failed_usb_serial_register;
+
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
+
+	/* register with usb */
+
+	retval = usb_register(&serqt_usb_driver);
+	if (retval == 0)
+		return 0;
+
+	/* if we're here, usb_register() failed */
+	usb_serial_deregister(&quatech_device);
+failed_usb_serial_register:
+	return retval;
+}
+
+static void __exit serqt_usb_exit(void)
+{
+	usb_deregister(&serqt_usb_driver);
+	usb_serial_deregister(&quatech_device);
+}
+
+module_init(serqt_usb_init);
+module_exit(serqt_usb_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c
index 6f5d0bff435..ed47db5ce5f 100644
--- a/drivers/staging/slicoss/slicoss.c
+++ b/drivers/staging/slicoss/slicoss.c
@@ -1872,7 +1872,6 @@ static int slic_card_download(struct adapter *adapter)
 	__iomem struct slic_regs *slic_regs = adapter->slic_regs;
 	u32 instruction;
 	u32 baseaddress;
-	u32 failure;
 	u32 i;
 	u32 numsects = 0;
 	u32 sectsize[3];
@@ -4049,7 +4048,7 @@ static struct pci_driver slic_driver = {
 	.name = DRV_NAME,
 	.id_table = slic_pci_tbl,
 	.probe = slic_entry_probe,
-	.remove = slic_entry_remove,
+	.remove = __devexit_p(slic_entry_remove),
 };
 
 static int __init slic_module_init(void)
diff --git a/drivers/staging/stlc45xx/stlc45xx.c b/drivers/staging/stlc45xx/stlc45xx.c
index 3eced5520c5..cfdaac9b747 100644
--- a/drivers/staging/stlc45xx/stlc45xx.c
+++ b/drivers/staging/stlc45xx/stlc45xx.c
@@ -1787,7 +1787,6 @@ static int stlc45xx_tx_pspoll(struct stlc45xx *stlc, bool powersave)
 	int payload_len, padding, i;
 	struct s_lm_data_out *data;
 	struct txbuffer *entry;
-	DECLARE_MAC_BUF(mac);
 	struct sk_buff *skb;
 	char *payload;
 	u16 fc;
@@ -1813,8 +1812,8 @@ static int stlc45xx_tx_pspoll(struct stlc45xx *stlc, bool powersave)
 	memcpy(pspoll->addr1, stlc->bssid, ETH_ALEN);
 	memcpy(pspoll->addr2, stlc->mac_addr, ETH_ALEN);
 
-	stlc45xx_debug(DEBUG_PSM, "sending PS-Poll frame to %s (powersave %d, "
-		       "fc 0x%x, aid %d)", print_mac(mac, pspoll->addr1),
+	stlc45xx_debug(DEBUG_PSM, "sending PS-Poll frame to %pM (powersave %d, "
+		       "fc 0x%x, aid %d)", pspoll->addr1,
 		       powersave, fc, stlc->aid);
 
 	spin_lock_bh(&stlc->tx_lock);
@@ -1903,7 +1902,6 @@ static int stlc45xx_tx_nullfunc(struct stlc45xx *stlc, bool powersave)
 	int payload_len, padding, i;
 	struct s_lm_data_out *data;
 	struct txbuffer *entry;
-	DECLARE_MAC_BUF(mac);
 	struct sk_buff *skb;
 	char *payload;
 	u16 fc;
@@ -1928,9 +1926,8 @@ static int stlc45xx_tx_nullfunc(struct stlc45xx *stlc, bool powersave)
 	memcpy(nullfunc->addr2, stlc->mac_addr, ETH_ALEN);
 	memcpy(nullfunc->addr3, stlc->bssid, ETH_ALEN);
 
-	stlc45xx_debug(DEBUG_PSM, "sending Null frame to %s (powersave %d, "
-		       "fc 0x%x)",
-		       print_mac(mac, nullfunc->addr1), powersave, fc);
+	stlc45xx_debug(DEBUG_PSM, "sending Null frame to %pM (powersave %d, "
+		       "fc 0x%x)", nullfunc->addr1, powersave, fc);
 
 	spin_lock_bh(&stlc->tx_lock);
 
diff --git a/drivers/staging/sxg/sxg.c b/drivers/staging/sxg/sxg.c
index 076b3f7d39e..3a0dac962e4 100644
--- a/drivers/staging/sxg/sxg.c
+++ b/drivers/staging/sxg/sxg.c
@@ -355,7 +355,7 @@ void sxg_remove_msix_isr(struct adapter_t *adapter)
 	for(i=0; i< adapter->nr_msix_entries;i++)
 	{
 		vector = adapter->msi_entries[i].vector;
-		DBG_ERROR("%s : Freeing IRQ vector#%d\n",__FUNCTION__,vector);
+		DBG_ERROR("%s : Freeing IRQ vector#%d\n",__func__,vector);
 		free_irq(vector,netdev);
 	}
 }
@@ -852,7 +852,7 @@ static inline int sxg_read_config(struct adapter_t *adapter)
  		 * Get out of here
  		 */
 		printk(KERN_ERR"%s : Could not allocate memory for reading \
-				 EEPROM\n", __FUNCTION__);
+				 EEPROM\n", __func__);
 		return -ENOMEM;
 	}
 
@@ -887,7 +887,7 @@ static inline int sxg_read_config(struct adapter_t *adapter)
 	case SXG_CFG_LOAD_ERROR:
 	default:	/* Fix default handler later */
 		printk(KERN_WARNING"%s  : We could not read the config \
-			word. Status = %ld\n", __FUNCTION__, status);
+			word. Status = %ld\n", __func__, status);
 		break;
 	}
 	pci_free_consistent(adapter->pcidev, sizeof(struct sw_cfg_data), data,
@@ -996,7 +996,7 @@ static int sxg_entry_probe(struct pci_dev *pcidev,
 		adapter->asictype = SAHARA_REV_B;
 	} else {
 		ASSERT(0);
-		DBG_ERROR("%s Unexpected revision ID %x\n", __FUNCTION__, revision_id);
+		DBG_ERROR("%s Unexpected revision ID %x\n", __func__, revision_id);
 		goto err_out_exit_sxg_probe;
 	}
 	adapter->netdev = netdev;
@@ -1176,9 +1176,9 @@ static int sxg_entry_probe(struct pci_dev *pcidev,
 		  smp_processor_id());
 
 	pci_disable_device(pcidev);
-        DBG_ERROR("sxg: %s deallocate device\n", __FUNCTION__);
+        DBG_ERROR("sxg: %s deallocate device\n", __func__);
         kfree(netdev);
-	printk("Exit %s, Sxg driver loading failed..\n", __FUNCTION__);
+	printk("Exit %s, Sxg driver loading failed..\n", __func__);
 
 	return -ENODEV;
 }
@@ -2191,10 +2191,10 @@ static int sxg_entry_open(struct net_device *dev)
 	/*
 	 * The microcode expects it to be downloaded on every open.
 	 */
-	DBG_ERROR("sxg: %s ENTER sxg_download_microcode\n", __FUNCTION__);
+	DBG_ERROR("sxg: %s ENTER sxg_download_microcode\n", __func__);
 	if (sxg_download_microcode(adapter, SXG_UCODE_SYSTEM)) {
 		DBG_ERROR("sxg: %s ENTER sxg_adapter_set_hwaddr\n",
-				__FUNCTION__);
+				__func__);
 		sxg_read_config(adapter);
 	} else {
 		adapter->state = ADAPT_FAIL;
@@ -2307,14 +2307,14 @@ static void __devexit sxg_entry_remove(struct pci_dev *pcidev)
         mmio_start = pci_resource_start(pcidev, 0);
         mmio_len = pci_resource_len(pcidev, 0);
 
-        DBG_ERROR("sxg: %s rel_region(0) start[%x] len[%x]\n", __FUNCTION__,
+        DBG_ERROR("sxg: %s rel_region(0) start[%x] len[%x]\n", __func__,
                   mmio_start, mmio_len);
         release_mem_region(mmio_start, mmio_len);
 
         mmio_start = pci_resource_start(pcidev, 2);
         mmio_len = pci_resource_len(pcidev, 2);
 
-        DBG_ERROR("sxg: %s rel_region(2) start[%x] len[%x]\n", __FUNCTION__,
+        DBG_ERROR("sxg: %s rel_region(2) start[%x] len[%x]\n", __func__,
                   mmio_start, mmio_len);
         release_mem_region(mmio_start, mmio_len);
 
@@ -2400,7 +2400,7 @@ static int sxg_entry_halt(struct net_device *dev)
 	atomic_set(&adapter->pending_allocations, 0);
 	adapter->intrregistered = 0;
 	sxg_remove_isr(adapter);
-	DBG_ERROR("sxg: %s (%s) EXIT\n", __FUNCTION__, dev->name);
+	DBG_ERROR("sxg: %s (%s) EXIT\n", __func__, dev->name);
 	return (STATUS_SUCCESS);
 }
 
@@ -2454,7 +2454,7 @@ static int sxg_send_packets(struct sk_buff *skb, struct net_device *dev)
 	u32 status = STATUS_SUCCESS;
 
 	/*
-	 * DBG_ERROR("sxg: %s ENTER sxg_send_packets skb[%p]\n", __FUNCTION__,
+	 * DBG_ERROR("sxg: %s ENTER sxg_send_packets skb[%p]\n", __func__,
 	 *	  skb);
 	 */
 
@@ -3405,7 +3405,7 @@ static int sxg_read_mdio_reg(struct adapter_t *adapter,
 
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "WrtMDIO",
 		  adapter, 0, 0, 0);
-	DBG_ERROR("ENTER %s\n", __FUNCTION__);
+	DBG_ERROR("ENTER %s\n", __func__);
 
 	/* Ensure values don't exceed field width */
 	DevAddr &= 0x001F;	/* 5-bit field */
@@ -3441,7 +3441,7 @@ static int sxg_read_mdio_reg(struct adapter_t *adapter,
 		udelay(100);	/* Timeout in 100us units */
 		READ_REG(HwRegs->MacAmiimIndicator, ValueRead);
 		if (--Timeout == 0) {
-            DBG_ERROR("EXIT %s with STATUS_FAILURE 1\n", __FUNCTION__);
+            DBG_ERROR("EXIT %s with STATUS_FAILURE 1\n", __func__);
 
 			return (STATUS_FAILURE);
 		}
@@ -3462,7 +3462,7 @@ static int sxg_read_mdio_reg(struct adapter_t *adapter,
 		udelay(100);	/* Timeout in 100us units */
 		READ_REG(HwRegs->MacAmiimIndicator, ValueRead);
 		if (--Timeout == 0) {
-            DBG_ERROR("EXIT %s with STATUS_FAILURE 2\n", __FUNCTION__);
+            DBG_ERROR("EXIT %s with STATUS_FAILURE 2\n", __func__);
 
 			return (STATUS_FAILURE);
 		}
@@ -3472,7 +3472,7 @@ static int sxg_read_mdio_reg(struct adapter_t *adapter,
 	READ_REG(HwRegs->MacAmiimField, *pValue);
 	*pValue &= 0xFFFF;	/* data is in the lower 16 bits */
 
-	DBG_ERROR("EXIT %s\n", __FUNCTION__);
+	DBG_ERROR("EXIT %s\n", __func__);
 
 	return (STATUS_SUCCESS);
 }
@@ -3545,7 +3545,7 @@ static void sxg_mcast_set_mask(struct adapter_t *adapter)
 {
 	struct sxg_ucode_regs *sxg_regs = adapter->UcodeRegs;
 
-	DBG_ERROR("%s ENTER (%s) MacFilter[%x] mask[%llx]\n", __FUNCTION__,
+	DBG_ERROR("%s ENTER (%s) MacFilter[%x] mask[%llx]\n", __func__,
 		  adapter->netdev->name, (unsigned int)adapter->MacFilter,
 		  adapter->MulticastMask);
 
@@ -4055,7 +4055,7 @@ static int sxg_adapter_set_hwaddr(struct adapter_t *adapter)
 	 *  sxg_dbg_macaddrs(adapter);
 	 */
 	/* DBG_ERROR ("%s AFTER copying from config.macinfo into currmacaddr\n",
-	 *	   		__FUNCTION__);
+	 *	   		__func__);
 	 */
 
 	/* sxg_dbg_macaddrs(adapter); */
@@ -4066,7 +4066,7 @@ static int sxg_adapter_set_hwaddr(struct adapter_t *adapter)
 		printk("sxg: Dev is Null\n");
 	}
 
-        DBG_ERROR("%s ENTER (%s)\n", __FUNCTION__, adapter->netdev->name);
+        DBG_ERROR("%s ENTER (%s)\n", __func__, adapter->netdev->name);
 
         if (netif_running(dev)) {
                 return -EBUSY;
@@ -4516,7 +4516,7 @@ static struct pci_driver sxg_driver = {
 	.name = sxg_driver_name,
 	.id_table = sxg_pci_tbl,
 	.probe = sxg_entry_probe,
-	.remove = sxg_entry_remove,
+	.remove = __devexit_p(sxg_entry_remove),
 #if SXG_POWER_MANAGEMENT_ENABLED
 	.suspend = sxgpm_suspend,
 	.resume = sxgpm_resume,
diff --git a/drivers/staging/sxg/sxg_ethtool.c b/drivers/staging/sxg/sxg_ethtool.c
index 97f765d1250..ad89cb829b8 100644
--- a/drivers/staging/sxg/sxg_ethtool.c
+++ b/drivers/staging/sxg/sxg_ethtool.c
@@ -278,7 +278,7 @@ static int sxg_nic_get_eeprom(struct net_device *netdev,
                  * Get out of here
                  */
                 printk(KERN_ERR"%s : Could not allocate memory for reading \
-                                EEPROM\n", __FUNCTION__);
+                                EEPROM\n", __func__);
                 return -ENOMEM;
         }
 
diff --git a/drivers/staging/udlfb/Kconfig b/drivers/staging/udlfb/Kconfig
new file mode 100644
index 00000000000..641692da0e4
--- /dev/null
+++ b/drivers/staging/udlfb/Kconfig
@@ -0,0 +1,8 @@
+config FB_UDL
+	tristate "Displaylink USB Framebuffer support"
+	depends on FB && USB
+	---help---
+	  This is an experimental driver for DisplayLink USB devices
+	  that provides a framebuffer device.  A normal framebuffer can
+	  be used with this driver, or xorg can be run on the device
+	  using it.
diff --git a/drivers/staging/udlfb/Makefile b/drivers/staging/udlfb/Makefile
new file mode 100644
index 00000000000..30d9e675b10
--- /dev/null
+++ b/drivers/staging/udlfb/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_FB_UDL)		+= udlfb.o
diff --git a/drivers/staging/udlfb/udlfb.c b/drivers/staging/udlfb/udlfb.c
new file mode 100644
index 00000000000..0ab9d15f343
--- /dev/null
+++ b/drivers/staging/udlfb/udlfb.c
@@ -0,0 +1,937 @@
+/*****************************************************************************
+ *                          DLFB Kernel Driver                               *
+ *                            Version 0.2 (udlfb)                            *
+ *             (C) 2009 Roberto De Ioris <roberto@unbit.it>                  *
+ *                                                                           *
+ *     This file is licensed under the GPLv2. See COPYING in the package.    *
+ * Based on the amazing work of Florian Echtler and libdlo 0.1               *
+ *                                                                           *
+ *                                                                           *
+ * 10.06.09 release 0.2.3 (edid ioctl, fallback for unsupported modes)       *
+ * 05.06.09 release 0.2.2 (real screen blanking, rle compression, double buffer) *
+ * 31.05.09 release 0.2                                                      *
+ * 22.05.09 First public (ugly) release                                      *
+ *****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <linux/uaccess.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/mutex.h>
+
+#include "udlfb.h"
+
+#define DRIVER_VERSION "DLFB 0.2"
+
+/* memory functions taken from vfb */
+
+static void *rvmalloc(unsigned long size)
+{
+	void *mem;
+	unsigned long adr;
+
+	size = PAGE_ALIGN(size);
+	mem = vmalloc_32(size);
+	if (!mem)
+		return NULL;
+
+	memset(mem, 0, size);	/* Clear the ram out, no junk to the user */
+	adr = (unsigned long)mem;
+	while (size > 0) {
+		SetPageReserved(vmalloc_to_page((void *)adr));
+		adr += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+
+	return mem;
+}
+
+static void rvfree(void *mem, unsigned long size)
+{
+	unsigned long adr;
+
+	if (!mem)
+		return;
+
+	adr = (unsigned long)mem;
+	while ((long)size > 0) {
+		ClearPageReserved(vmalloc_to_page((void *)adr));
+		adr += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+	vfree(mem);
+}
+
+static int dlfb_mmap(struct fb_info *info, struct vm_area_struct *vma)
+{
+	unsigned long start = vma->vm_start;
+	unsigned long size = vma->vm_end - vma->vm_start;
+	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+	unsigned long page, pos;
+
+	printk("MMAP: %lu %u\n", offset + size, info->fix.smem_len);
+
+	if (offset + size > info->fix.smem_len)
+		return -EINVAL;
+
+	pos = (unsigned long)info->fix.smem_start + offset;
+
+	while (size > 0) {
+		page = vmalloc_to_pfn((void *)pos);
+		if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED))
+			return -EAGAIN;
+
+		start += PAGE_SIZE;
+		pos += PAGE_SIZE;
+		if (size > PAGE_SIZE)
+			size -= PAGE_SIZE;
+		else
+			size = 0;
+	}
+
+	vma->vm_flags |= VM_RESERVED;	/* avoid to swap out this VMA */
+	return 0;
+
+}
+
+/* ioctl structure */
+struct dloarea {
+	int x, y;
+	int w, h;
+	int x2, y2;
+};
+
+/*
+static struct usb_device_id id_table [] = {
+	{ USB_DEVICE(0x17e9, 0x023d) },
+	{ }
+};
+*/
+
+static struct usb_device_id id_table[] = {
+	{.idVendor = 0x17e9, .match_flags = USB_DEVICE_ID_MATCH_VENDOR,},
+	{},
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver dlfb_driver;
+
+// thanks to Henrik Bjerregaard Pedersen for this function
+static char *rle_compress16(uint16_t * src, char *dst, int rem)
+{
+
+	int rl;
+	uint16_t pix0;
+	char *end_if_raw = dst + 6 + 2 * rem;
+
+	dst += 6;		// header will be filled in if RLE is worth it
+
+	while (rem && dst < end_if_raw) {
+		char *start = (char *)src;
+
+		pix0 = *src++;
+		rl = 1;
+		rem--;
+		while (rem && *src == pix0)
+			rem--, rl++, src++;
+		*dst++ = rl;
+		*dst++ = start[1];
+		*dst++ = start[0];
+	}
+
+	return dst;
+}
+
+/*
+Thanks to Henrik Bjerregaard Pedersen for rle implementation and code refactoring.
+Next step is huffman compression.
+*/
+
+static int
+image_blit(struct dlfb_data *dev_info, int x, int y, int width, int height,
+	   char *data)
+{
+
+	int i, j, base;
+	int rem = width;
+	int ret;
+
+	int firstdiff, thistime;
+
+	char *bufptr;
+
+	if (x + width > dev_info->info->var.xres)
+		return -EINVAL;
+
+	if (y + height > dev_info->info->var.yres)
+		return -EINVAL;
+
+	mutex_lock(&dev_info->bulk_mutex);
+
+	base =
+	    dev_info->base16 + ((dev_info->info->var.xres * 2 * y) + (x * 2));
+
+	data += (dev_info->info->var.xres * 2 * y) + (x * 2);
+
+	/* printk("IMAGE_BLIT\n"); */
+
+	bufptr = dev_info->buf;
+
+	for (i = y; i < y + height; i++) {
+
+		if (dev_info->bufend - bufptr < BUF_HIGH_WATER_MARK) {
+			ret = dlfb_bulk_msg(dev_info, bufptr - dev_info->buf);
+			bufptr = dev_info->buf;
+		}
+
+		rem = width;
+
+		/* printk("WRITING LINE %d\n", i); */
+
+		while (rem) {
+
+			if (dev_info->bufend - bufptr < BUF_HIGH_WATER_MARK) {
+				ret =
+				    dlfb_bulk_msg(dev_info,
+						  bufptr - dev_info->buf);
+				bufptr = dev_info->buf;
+			}
+			// number of pixels to consider this time
+			thistime = rem;
+			if (thistime > 255)
+				thistime = 255;
+
+			// find position of first pixel that has changed
+			firstdiff = -1;
+			for (j = 0; j < thistime * 2; j++) {
+				if (dev_info->backing_buffer
+				    [base - dev_info->base16 + j] != data[j]) {
+					firstdiff = j / 2;
+					break;
+				}
+			}
+
+			if (firstdiff >= 0) {
+				char *end_of_rle;
+
+				end_of_rle =
+				    rle_compress16((uint16_t *) (data +
+								 firstdiff * 2),
+						   bufptr,
+						   thistime - firstdiff);
+
+				if (end_of_rle <
+				    bufptr + 6 + 2 * (thistime - firstdiff)) {
+					bufptr[0] = 0xAF;
+					bufptr[1] = 0x69;
+
+					bufptr[2] =
+					    (char)((base +
+						    firstdiff * 2) >> 16);
+					bufptr[3] =
+					    (char)((base + firstdiff * 2) >> 8);
+					bufptr[4] =
+					    (char)(base + firstdiff * 2);
+					bufptr[5] = thistime - firstdiff;
+
+					bufptr = end_of_rle;
+
+				} else {
+					// fallback to raw (or some other encoding?)
+					*bufptr++ = 0xAF;
+					*bufptr++ = 0x68;
+
+					*bufptr++ =
+					    (char)((base +
+						    firstdiff * 2) >> 16);
+					*bufptr++ =
+					    (char)((base + firstdiff * 2) >> 8);
+					*bufptr++ =
+					    (char)(base + firstdiff * 2);
+					*bufptr++ = thistime - firstdiff;
+					// PUT COMPRESSION HERE
+					for (j = firstdiff * 2;
+					     j < thistime * 2; j += 2) {
+						*bufptr++ = data[j + 1];
+						*bufptr++ = data[j];
+					}
+				}
+			}
+
+			base += thistime * 2;
+			data += thistime * 2;
+			rem -= thistime;
+		}
+
+		memcpy(dev_info->backing_buffer + (base - dev_info->base16) -
+		       (width * 2), data - (width * 2), width * 2);
+
+		base += (dev_info->info->var.xres * 2) - (width * 2);
+		data += (dev_info->info->var.xres * 2) - (width * 2);
+
+	}
+
+	if (bufptr > dev_info->buf) {
+		ret = dlfb_bulk_msg(dev_info, bufptr - dev_info->buf);
+	}
+
+	mutex_unlock(&dev_info->bulk_mutex);
+
+	return base;
+
+}
+
+static int
+draw_rect(struct dlfb_data *dev_info, int x, int y, int width, int height,
+	  unsigned char red, unsigned char green, unsigned char blue)
+{
+
+	int i, j, base;
+	int ret;
+	unsigned short col =
+	    (((((red) & 0xF8) | ((green) >> 5)) & 0xFF) << 8) +
+	    (((((green) & 0x1C) << 3) | ((blue) >> 3)) & 0xFF);
+	int rem = width;
+
+	char *bufptr;
+
+	if (x + width > dev_info->info->var.xres)
+		return -EINVAL;
+
+	if (y + height > dev_info->info->var.yres)
+		return -EINVAL;
+
+	mutex_lock(&dev_info->bulk_mutex);
+
+	base = dev_info->base16 + (dev_info->info->var.xres * 2 * y) + (x * 2);
+
+	bufptr = dev_info->buf;
+
+	for (i = y; i < y + height; i++) {
+
+		for (j = 0; j < width * 2; j += 2) {
+			dev_info->backing_buffer[base - dev_info->base16 + j] =
+			    (char)(col >> 8);
+			dev_info->backing_buffer[base - dev_info->base16 + j +
+						 1] = (char)(col);
+		}
+		if (dev_info->bufend - bufptr < BUF_HIGH_WATER_MARK) {
+			ret = dlfb_bulk_msg(dev_info, bufptr - dev_info->buf);
+			bufptr = dev_info->buf;
+		}
+
+		rem = width;
+
+		while (rem) {
+
+			if (dev_info->bufend - bufptr < BUF_HIGH_WATER_MARK) {
+				ret =
+				    dlfb_bulk_msg(dev_info,
+						  bufptr - dev_info->buf);
+				bufptr = dev_info->buf;
+			}
+
+			*bufptr++ = 0xAF;
+			*bufptr++ = 0x69;
+
+			*bufptr++ = (char)(base >> 16);
+			*bufptr++ = (char)(base >> 8);
+			*bufptr++ = (char)(base);
+
+			if (rem > 255) {
+				*bufptr++ = 255;
+				*bufptr++ = 255;
+				rem -= 255;
+				base += 255 * 2;
+			} else {
+				*bufptr++ = rem;
+				*bufptr++ = rem;
+				base += rem * 2;
+				rem = 0;
+			}
+
+			*bufptr++ = (char)(col >> 8);
+			*bufptr++ = (char)(col);
+
+		}
+
+		base += (dev_info->info->var.xres * 2) - (width * 2);
+
+	}
+
+	if (bufptr > dev_info->buf)
+		ret = dlfb_bulk_msg(dev_info, bufptr - dev_info->buf);
+
+	mutex_unlock(&dev_info->bulk_mutex);
+
+	return 1;
+}
+
+static void swapfb(struct dlfb_data *dev_info)
+{
+
+	int tmpbase;
+	char *bufptr;
+
+	mutex_lock(&dev_info->bulk_mutex);
+
+	tmpbase = dev_info->base16;
+
+	dev_info->base16 = dev_info->base16d;
+	dev_info->base16d = tmpbase;
+
+	bufptr = dev_info->buf;
+
+	bufptr = dlfb_set_register(bufptr, 0xFF, 0x00);
+
+	// set addresses
+	bufptr =
+	    dlfb_set_register(bufptr, 0x20, (char)(dev_info->base16 >> 16));
+	bufptr = dlfb_set_register(bufptr, 0x21, (char)(dev_info->base16 >> 8));
+	bufptr = dlfb_set_register(bufptr, 0x22, (char)(dev_info->base16));
+
+	bufptr = dlfb_set_register(bufptr, 0xFF, 0x00);
+
+	dlfb_bulk_msg(dev_info, bufptr - dev_info->buf);
+
+	mutex_unlock(&dev_info->bulk_mutex);
+}
+
+static int copyfb(struct dlfb_data *dev_info)
+{
+	int base;
+	int source;
+	int rem;
+	int i, ret;
+
+	char *bufptr;
+
+	base = dev_info->base16d;
+
+	mutex_lock(&dev_info->bulk_mutex);
+
+	source = dev_info->base16;
+
+	bufptr = dev_info->buf;
+
+	for (i = 0; i < dev_info->info->var.yres; i++) {
+
+		if (dev_info->bufend - bufptr < BUF_HIGH_WATER_MARK) {
+			ret = dlfb_bulk_msg(dev_info, bufptr - dev_info->buf);
+			bufptr = dev_info->buf;
+		}
+
+		rem = dev_info->info->var.xres;
+
+		while (rem) {
+
+			if (dev_info->bufend - bufptr < BUF_HIGH_WATER_MARK) {
+				ret =
+				    dlfb_bulk_msg(dev_info,
+						  bufptr - dev_info->buf);
+				bufptr = dev_info->buf;
+
+			}
+
+			*bufptr++ = 0xAF;
+			*bufptr++ = 0x6A;
+
+			*bufptr++ = (char)(base >> 16);
+			*bufptr++ = (char)(base >> 8);
+			*bufptr++ = (char)(base);
+
+			if (rem > 255) {
+				*bufptr++ = 255;
+				*bufptr++ = (char)(source >> 16);
+				*bufptr++ = (char)(source >> 8);
+				*bufptr++ = (char)(source);
+
+				rem -= 255;
+				base += 255 * 2;
+				source += 255 * 2;
+
+			} else {
+				*bufptr++ = rem;
+				*bufptr++ = (char)(source >> 16);
+				*bufptr++ = (char)(source >> 8);
+				*bufptr++ = (char)(source);
+
+				base += rem * 2;
+				source += rem * 2;
+				rem = 0;
+			}
+		}
+	}
+
+	if (bufptr > dev_info->buf)
+		ret = dlfb_bulk_msg(dev_info, bufptr - dev_info->buf);
+
+	mutex_unlock(&dev_info->bulk_mutex);
+
+	return 1;
+
+}
+
+static int
+copyarea(struct dlfb_data *dev_info, int dx, int dy, int sx, int sy,
+	 int width, int height)
+{
+	int base;
+	int source;
+	int rem;
+	int i, ret;
+
+	char *bufptr;
+
+	if (dx + width > dev_info->info->var.xres)
+		return -EINVAL;
+
+	if (dy + height > dev_info->info->var.yres)
+		return -EINVAL;
+
+	mutex_lock(&dev_info->bulk_mutex);
+
+	base =
+	    dev_info->base16 + (dev_info->info->var.xres * 2 * dy) + (dx * 2);
+	source = (dev_info->info->var.xres * 2 * sy) + (sx * 2);
+
+	bufptr = dev_info->buf;
+
+	for (i = sy; i < sy + height; i++) {
+
+		memcpy(dev_info->backing_buffer + base - dev_info->base16,
+		       dev_info->backing_buffer + source, width * 2);
+
+		if (dev_info->bufend - bufptr < BUF_HIGH_WATER_MARK) {
+			ret = dlfb_bulk_msg(dev_info, bufptr - dev_info->buf);
+			bufptr = dev_info->buf;
+		}
+
+		rem = width;
+
+		while (rem) {
+
+			if (dev_info->bufend - bufptr < BUF_HIGH_WATER_MARK) {
+				ret =
+				    dlfb_bulk_msg(dev_info,
+						  bufptr - dev_info->buf);
+				bufptr = dev_info->buf;
+			}
+
+			*bufptr++ = 0xAF;
+			*bufptr++ = 0x6A;
+
+			*bufptr++ = (char)(base >> 16);
+			*bufptr++ = (char)(base >> 8);
+			*bufptr++ = (char)(base);
+
+			if (rem > 255) {
+				*bufptr++ = 255;
+				*bufptr++ = (char)(source >> 16);
+				*bufptr++ = (char)(source >> 8);
+				*bufptr++ = (char)(source);
+
+				rem -= 255;
+				base += 255 * 2;
+				source += 255 * 2;
+
+			} else {
+				*bufptr++ = rem;
+				*bufptr++ = (char)(source >> 16);
+				*bufptr++ = (char)(source >> 8);
+				*bufptr++ = (char)(source);
+
+				base += rem * 2;
+				source += rem * 2;
+				rem = 0;
+			}
+		}
+
+		base += (dev_info->info->var.xres * 2) - (width * 2);
+		source += (dev_info->info->var.xres * 2) - (width * 2);
+	}
+
+	if (bufptr > dev_info->buf)
+		ret = dlfb_bulk_msg(dev_info, bufptr - dev_info->buf);
+
+	mutex_unlock(&dev_info->bulk_mutex);
+
+	return 1;
+}
+
+static void dlfb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
+{
+
+	struct dlfb_data *dev = info->par;
+
+	copyarea(dev, area->dx, area->dy, area->sx, area->sy, area->width,
+		 area->height);
+
+	/* printk("COPY AREA %d %d %d %d %d %d !!!\n", area->dx, area->dy, area->sx, area->sy, area->width, area->height); */
+
+}
+
+static void dlfb_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+
+	int ret;
+	struct dlfb_data *dev = info->par;
+	/* printk("IMAGE BLIT (1) %d %d %d %d DEPTH %d {%p}!!!\n", image->dx, image->dy, image->width, image->height, image->depth, dev->udev); */
+	cfb_imageblit(info, image);
+	ret =
+	    image_blit(dev, image->dx, image->dy, image->width, image->height,
+		       info->screen_base);
+	/* printk("IMAGE BLIT (2) %d %d %d %d DEPTH %d {%p} %d!!!\n", image->dx, image->dy, image->width, image->height, image->depth, dev->udev, ret); */
+}
+
+static void dlfb_fillrect(struct fb_info *info,
+			  const struct fb_fillrect *region)
+{
+
+	unsigned char red, green, blue;
+	struct dlfb_data *dev = info->par;
+
+	memcpy(&red, &region->color, 1);
+	memcpy(&green, &region->color + 1, 1);
+	memcpy(&blue, &region->color + 2, 1);
+	draw_rect(dev, region->dx, region->dy, region->width, region->height,
+		  red, green, blue);
+	/* printk("FILL RECT %d %d !!!\n", region->dx, region->dy); */
+
+}
+
+static int dlfb_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg)
+{
+
+	struct dlfb_data *dev_info = info->par;
+	struct dloarea *area = NULL;
+
+	if (cmd == 0xAD) {
+		char *edid = (char *)arg;
+		dlfb_edid(dev_info);
+		if (copy_to_user(edid, dev_info->edid, 128)) {
+			return -EFAULT;
+		}
+		return 0;
+	}
+
+	if (cmd == 0xAA || cmd == 0xAB || cmd == 0xAC) {
+
+		area = (struct dloarea *)arg;
+
+		if (area->x < 0)
+			area->x = 0;
+
+		if (area->x > info->var.xres)
+			area->x = info->var.xres;
+
+		if (area->y < 0)
+			area->y = 0;
+
+		if (area->y > info->var.yres)
+			area->y = info->var.yres;
+	}
+
+	if (cmd == 0xAA) {
+		image_blit(dev_info, area->x, area->y, area->w, area->h,
+			   info->screen_base);
+	}
+	if (cmd == 0xAC) {
+		copyfb(dev_info);
+		image_blit(dev_info, area->x, area->y, area->w, area->h,
+			   info->screen_base);
+		swapfb(dev_info);
+	} else if (cmd == 0xAB) {
+
+		if (area->x2 < 0)
+			area->x2 = 0;
+
+		if (area->y2 < 0)
+			area->y2 = 0;
+
+		copyarea(dev_info,
+			 area->x2, area->y2, area->x, area->y, area->w,
+			 area->h);
+	}
+	return 0;
+}
+
+/* taken from vesafb */
+
+static int
+dlfb_setcolreg(unsigned regno, unsigned red, unsigned green,
+	       unsigned blue, unsigned transp, struct fb_info *info)
+{
+	int err = 0;
+
+	if (regno >= info->cmap.len)
+		return 1;
+
+	if (regno < 16) {
+		if (info->var.red.offset == 10) {
+			/* 1:5:5:5 */
+			((u32 *) (info->pseudo_palette))[regno] =
+			    ((red & 0xf800) >> 1) |
+			    ((green & 0xf800) >> 6) | ((blue & 0xf800) >> 11);
+		} else {
+			/* 0:5:6:5 */
+			((u32 *) (info->pseudo_palette))[regno] =
+			    ((red & 0xf800)) |
+			    ((green & 0xfc00) >> 5) | ((blue & 0xf800) >> 11);
+		}
+	}
+
+	return err;
+}
+
+static int dlfb_release(struct fb_info *info, int user)
+{
+	struct dlfb_data *dev_info = info->par;
+	image_blit(dev_info, 0, 0, info->var.xres, info->var.yres,
+		   info->screen_base);
+	return 0;
+}
+
+static int dlfb_blank(int blank_mode, struct fb_info *info)
+{
+	struct dlfb_data *dev_info = info->par;
+	char *bufptr = dev_info->buf;
+
+	bufptr = dlfb_set_register(bufptr, 0xFF, 0x00);
+	if (blank_mode != FB_BLANK_UNBLANK) {
+		bufptr = dlfb_set_register(bufptr, 0x1F, 0x01);
+	} else {
+		bufptr = dlfb_set_register(bufptr, 0x1F, 0x00);
+	}
+	bufptr = dlfb_set_register(bufptr, 0xFF, 0xFF);
+
+	dlfb_bulk_msg(dev_info, bufptr - dev_info->buf);
+
+	return 0;
+}
+
+static struct fb_ops dlfb_ops = {
+	.fb_setcolreg = dlfb_setcolreg,
+	.fb_fillrect = dlfb_fillrect,
+	.fb_copyarea = dlfb_copyarea,
+	.fb_imageblit = dlfb_imageblit,
+	.fb_mmap = dlfb_mmap,
+	.fb_ioctl = dlfb_ioctl,
+	.fb_release = dlfb_release,
+	.fb_blank = dlfb_blank,
+};
+
+static int
+dlfb_probe(struct usb_interface *interface, const struct usb_device_id *id)
+{
+	struct dlfb_data *dev_info;
+	struct fb_info *info;
+
+	int ret;
+	char rbuf[4];
+
+	dev_info = kzalloc(sizeof(*dev_info), GFP_KERNEL);
+	if (dev_info == NULL) {
+		printk("cannot allocate dev_info structure.\n");
+		return -ENOMEM;
+	}
+
+	mutex_init(&dev_info->bulk_mutex);
+
+	dev_info->udev = usb_get_dev(interface_to_usbdev(interface));
+	dev_info->interface = interface;
+
+	printk("DisplayLink device attached\n");
+
+	/* add framebuffer info to usb interface */
+	usb_set_intfdata(interface, dev_info);
+
+	dev_info->buf = kmalloc(BUF_SIZE, GFP_KERNEL);
+	/* usb_buffer_alloc(dev_info->udev, BUF_SIZE , GFP_KERNEL, &dev_info->tx_urb->transfer_dma); */
+
+	if (dev_info->buf == NULL) {
+		printk("unable to allocate memory for dlfb commands\n");
+		goto out;
+	}
+	dev_info->bufend = dev_info->buf + BUF_SIZE;
+
+	dev_info->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	usb_fill_bulk_urb(dev_info->tx_urb, dev_info->udev,
+			  usb_sndbulkpipe(dev_info->udev, 1), dev_info->buf, 0,
+			  dlfb_bulk_callback, dev_info);
+
+	ret =
+	    usb_control_msg(dev_info->udev, usb_rcvctrlpipe(dev_info->udev, 0),
+			    (0x06), (0x80 | (0x02 << 5)), 0, 0, rbuf, 4, 0);
+	printk("ret control msg 0: %d %x%x%x%x\n", ret, rbuf[0], rbuf[1],
+	       rbuf[2], rbuf[3]);
+
+	dlfb_edid(dev_info);
+
+	info = framebuffer_alloc(sizeof(u32) * 256, &dev_info->udev->dev);
+
+	if (!info) {
+		printk("non posso allocare il framebuffer displaylink");
+		goto out;
+	}
+
+	fb_parse_edid(dev_info->edid, &info->var);
+
+	printk("EDID XRES %d YRES %d\n", info->var.xres, info->var.yres);
+
+	if (dlfb_set_video_mode(dev_info, info->var.xres, info->var.yres) != 0) {
+		info->var.xres = 1280;
+		info->var.yres = 1024;
+		if (dlfb_set_video_mode
+		    (dev_info, info->var.xres, info->var.yres) != 0) {
+			goto out;
+		}
+	}
+
+	printk("found valid mode...%d\n", info->var.pixclock);
+
+	info->pseudo_palette = info->par;
+	info->par = dev_info;
+
+	dev_info->info = info;
+
+	info->flags =
+	    FBINFO_DEFAULT | FBINFO_READS_FAST | FBINFO_HWACCEL_IMAGEBLIT |
+	    FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT;
+	info->fbops = &dlfb_ops;
+	info->screen_base = rvmalloc(dev_info->screen_size);
+
+	if (info->screen_base == NULL) {
+		printk
+		    ("cannot allocate framebuffer virtual memory of %d bytes\n",
+		     dev_info->screen_size);
+		goto out0;
+	}
+
+	printk("screen base allocated !!!\n");
+
+	dev_info->backing_buffer = kzalloc(dev_info->screen_size, GFP_KERNEL);
+
+	if (!dev_info->backing_buffer)
+		printk("non posso allocare il backing buffer\n");
+
+	/* info->var = dev_info->si; */
+
+	info->var.bits_per_pixel = 16;
+	info->var.activate = FB_ACTIVATE_TEST;
+	info->var.vmode = FB_VMODE_NONINTERLACED;
+
+	info->var.red.offset = 11;
+	info->var.red.length = 5;
+	info->var.red.msb_right = 0;
+
+	info->var.green.offset = 5;
+	info->var.green.length = 6;
+	info->var.green.msb_right = 0;
+
+	info->var.blue.offset = 0;
+	info->var.blue.length = 5;
+	info->var.blue.msb_right = 0;
+
+	/* info->var.pixclock =  (10000000 / FB_W * 1000 / FB_H)/2 ; */
+
+	info->fix.smem_start = (unsigned long)info->screen_base;
+	info->fix.smem_len = PAGE_ALIGN(dev_info->screen_size);
+	if (strlen(dev_info->udev->product) > 15) {
+		memcpy(info->fix.id, dev_info->udev->product, 15);
+	} else {
+		memcpy(info->fix.id, dev_info->udev->product,
+		       strlen(dev_info->udev->product));
+	}
+	info->fix.type = FB_TYPE_PACKED_PIXELS;
+	info->fix.visual = FB_VISUAL_TRUECOLOR;
+	info->fix.accel = info->flags;
+	info->fix.line_length = dev_info->line_length;
+
+	if (fb_alloc_cmap(&info->cmap, 256, 0) < 0)
+		goto out1;
+
+	printk("colormap allocated\n");
+	if (register_framebuffer(info) < 0)
+		goto out2;
+
+	draw_rect(dev_info, 0, 0, dev_info->info->var.xres,
+		  dev_info->info->var.yres, 0x30, 0xff, 0x30);
+
+	return 0;
+
+out2:
+	fb_dealloc_cmap(&info->cmap);
+out1:
+	rvfree(info->screen_base, dev_info->screen_size);
+out0:
+	framebuffer_release(info);
+out:
+	usb_set_intfdata(interface, NULL);
+	usb_put_dev(dev_info->udev);
+	kfree(dev_info);
+	return -ENOMEM;
+
+}
+
+static void dlfb_disconnect(struct usb_interface *interface)
+{
+	struct dlfb_data *dev_info = usb_get_intfdata(interface);
+
+	mutex_unlock(&dev_info->bulk_mutex);
+
+	usb_kill_urb(dev_info->tx_urb);
+	usb_free_urb(dev_info->tx_urb);
+	usb_set_intfdata(interface, NULL);
+	usb_put_dev(dev_info->udev);
+
+	if (dev_info->info) {
+		unregister_framebuffer(dev_info->info);
+		fb_dealloc_cmap(&dev_info->info->cmap);
+		rvfree(dev_info->info->screen_base, dev_info->screen_size);
+		kfree(dev_info->backing_buffer);
+		framebuffer_release(dev_info->info);
+
+	}
+
+	kfree(dev_info);
+
+	printk("DisplayLink device disconnected\n");
+}
+
+static struct usb_driver dlfb_driver = {
+	.name = "udlfb",
+	.probe = dlfb_probe,
+	.disconnect = dlfb_disconnect,
+	.id_table = id_table,
+};
+
+static int __init dlfb_init(void)
+{
+	int res;
+
+	dlfb_init_modes();
+
+	res = usb_register(&dlfb_driver);
+	if (res)
+		err("usb_register failed. Error number %d", res);
+
+	printk("VMODES initialized\n");
+
+	return res;
+}
+
+static void __exit dlfb_exit(void)
+{
+	usb_deregister(&dlfb_driver);
+}
+
+module_init(dlfb_init);
+module_exit(dlfb_exit);
+
+MODULE_AUTHOR("Roberto De Ioris <roberto@unbit.it>");
+MODULE_DESCRIPTION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/udlfb/udlfb.h b/drivers/staging/udlfb/udlfb.h
new file mode 100644
index 00000000000..08bd671204b
--- /dev/null
+++ b/drivers/staging/udlfb/udlfb.h
@@ -0,0 +1,225 @@
+#ifndef UDLFB_H
+#define UDLFB_H
+
+#define MAX_VMODES	4
+#define FB_BPP		16
+
+#define STD_CHANNEL	"\x57\xCD\xDC\xA7\x1C\x88\x5E\x15"	\
+			"\x60\xFE\xC6\x97\x16\x3D\x47\xF2"
+
+/* as libdlo */
+#define BUF_HIGH_WATER_MARK	1024
+#define BUF_SIZE		(64*1024)
+
+struct dlfb_data {
+	struct usb_device *udev;
+	struct usb_interface *interface;
+	struct urb *tx_urb, *ctrl_urb;
+	struct usb_ctrlrequest dr;
+	struct fb_info *info;
+	char *buf;
+	char *bufend;
+	char *backing_buffer;
+	struct mutex bulk_mutex;
+	char edid[128];
+	int screen_size;
+	int line_length;
+	struct completion done;
+	int base16;
+	int base16d;
+	int base8;
+	int base8d;
+};
+
+struct dlfb_video_mode {
+	uint8_t col;
+	uint32_t hclock;
+	uint32_t vclock;
+	uint8_t unknown1[6];
+	uint16_t xres;
+	uint8_t unknown2[6];
+	uint16_t yres;
+	uint8_t unknown3[4];
+} __attribute__ ((__packed__));
+
+static struct dlfb_video_mode dlfb_video_modes[MAX_VMODES];
+
+static void dlfb_bulk_callback(struct urb *urb)
+{
+	struct dlfb_data *dev_info = urb->context;
+	complete(&dev_info->done);
+}
+
+static void dlfb_edid(struct dlfb_data *dev_info)
+{
+	int i;
+	int ret;
+	char rbuf[2];
+
+	for (i = 0; i < 128; i++) {
+		ret =
+		    usb_control_msg(dev_info->udev,
+				    usb_rcvctrlpipe(dev_info->udev, 0), (0x02),
+				    (0x80 | (0x02 << 5)), i << 8, 0xA1, rbuf, 2,
+				    0);
+		/*printk("ret control msg edid %d: %d [%d]\n",i, ret, rbuf[1]); */
+		dev_info->edid[i] = rbuf[1];
+	}
+
+}
+
+static int dlfb_bulk_msg(struct dlfb_data *dev_info, int len)
+{
+	int ret;
+
+	init_completion(&dev_info->done);
+
+	dev_info->tx_urb->actual_length = 0;
+	dev_info->tx_urb->transfer_buffer_length = len;
+
+	ret = usb_submit_urb(dev_info->tx_urb, GFP_KERNEL);
+	if (!wait_for_completion_timeout(&dev_info->done, 1000)) {
+		usb_kill_urb(dev_info->tx_urb);
+		printk("usb timeout !!!\n");
+	}
+
+	return dev_info->tx_urb->actual_length;
+}
+
+static void dlfb_init_modes(void)
+{
+	dlfb_video_modes[0].col = 0;
+	memcpy(&dlfb_video_modes[0].hclock, "\x20\x3C\x7A\xC9", 4);
+	memcpy(&dlfb_video_modes[0].vclock, "\xF2\x6C\x48\xF9", 4);
+	memcpy(&dlfb_video_modes[0].unknown1, "\x70\x53\xFF\xFF\x21\x27", 6);
+	dlfb_video_modes[0].xres = 800;
+	memcpy(&dlfb_video_modes[0].unknown2, "\x91\xF3\xFF\xFF\xFF\xF9", 6);
+	dlfb_video_modes[0].yres = 480;
+	memcpy(&dlfb_video_modes[0].unknown3, "\x01\x02\xC8\x19", 4);
+
+	dlfb_video_modes[1].col = 0;
+	memcpy(&dlfb_video_modes[1].hclock, "\x36\x18\xD5\x10", 4);
+	memcpy(&dlfb_video_modes[1].vclock, "\x60\xA9\x7B\x33", 4);
+	memcpy(&dlfb_video_modes[1].unknown1, "\xA1\x2B\x27\x32\xFF\xFF", 6);
+	dlfb_video_modes[1].xres = 1024;
+	memcpy(&dlfb_video_modes[1].unknown2, "\xD9\x9A\xFF\xCA\xFF\xFF", 6);
+	dlfb_video_modes[1].yres = 768;
+	memcpy(&dlfb_video_modes[1].unknown3, "\x04\x03\xC8\x32", 4);
+
+	dlfb_video_modes[2].col = 0;
+	memcpy(&dlfb_video_modes[2].hclock, "\x98\xF8\x0D\x57", 4);
+	memcpy(&dlfb_video_modes[2].vclock, "\x2A\x55\x4D\x54", 4);
+	memcpy(&dlfb_video_modes[2].unknown1, "\xCA\x0D\xFF\xFF\x94\x43", 6);
+	dlfb_video_modes[2].xres = 1280;
+	memcpy(&dlfb_video_modes[2].unknown2, "\x9A\xA8\xFF\xFF\xFF\xF9", 6);
+	dlfb_video_modes[2].yres = 1024;
+	memcpy(&dlfb_video_modes[2].unknown3, "\x04\x02\x60\x54", 4);
+
+	dlfb_video_modes[3].col = 0;
+	memcpy(&dlfb_video_modes[3].hclock, "\x42\x24\x38\x36", 4);
+	memcpy(&dlfb_video_modes[3].vclock, "\xC1\x52\xD9\x29", 4);
+	memcpy(&dlfb_video_modes[3].unknown1, "\xEA\xB8\x32\x60\xFF\xFF", 6);
+	dlfb_video_modes[3].xres = 1400;
+	memcpy(&dlfb_video_modes[3].unknown2, "\xC9\x4E\xFF\xFF\xFF\xF2", 6);
+	dlfb_video_modes[3].yres = 1050;
+	memcpy(&dlfb_video_modes[3].unknown3, "\x04\x02\x1E\x5F", 4);
+}
+
+static char *dlfb_set_register(char *bufptr, uint8_t reg, uint8_t val)
+{
+	*bufptr++ = 0xAF;
+	*bufptr++ = 0x20;
+	*bufptr++ = reg;
+	*bufptr++ = val;
+
+	return bufptr;
+}
+
+static int dlfb_set_video_mode(struct dlfb_data *dev_info, int width, int height)
+{
+	int i, ret;
+	unsigned char j;
+	char *bufptr = dev_info->buf;
+	uint8_t *vdata;
+
+	for (i = 0; i < MAX_VMODES; i++) {
+		printk("INIT VIDEO %d %d %d\n", i, dlfb_video_modes[i].xres,
+		       dlfb_video_modes[i].yres);
+		if (dlfb_video_modes[i].xres == width
+		    && dlfb_video_modes[i].yres == height) {
+
+			dev_info->base16 = 0;
+			dev_info->base16d = width * height * (FB_BPP / 8);
+
+			//dev_info->base8 = width * height * (FB_BPP / 8);
+
+			dev_info->base8 = dev_info->base16;
+			dev_info->base8d = dev_info->base16d;
+
+			/* set encryption key (null) */
+			memcpy(dev_info->buf, STD_CHANNEL, 16);
+			ret =
+			    usb_control_msg(dev_info->udev,
+					    usb_sndctrlpipe(dev_info->udev, 0),
+					    0x12, (0x02 << 5), 0, 0,
+					    dev_info->buf, 16, 0);
+			printk("ret control msg 1 (STD_CHANNEL): %d\n", ret);
+
+			/* set registers */
+			bufptr = dlfb_set_register(bufptr, 0xFF, 0x00);
+
+			/* set color depth */
+			bufptr = dlfb_set_register(bufptr, 0x00, 0x00);
+
+			/* set addresses */
+			bufptr =
+			    dlfb_set_register(bufptr, 0x20,
+					      (char)(dev_info->base16 >> 16));
+			bufptr =
+			    dlfb_set_register(bufptr, 0x21,
+					      (char)(dev_info->base16 >> 8));
+			bufptr =
+			    dlfb_set_register(bufptr, 0x22,
+					      (char)(dev_info->base16));
+
+			bufptr =
+			    dlfb_set_register(bufptr, 0x26,
+					      (char)(dev_info->base8 >> 16));
+			bufptr =
+			    dlfb_set_register(bufptr, 0x27,
+					      (char)(dev_info->base8 >> 8));
+			bufptr =
+			    dlfb_set_register(bufptr, 0x28,
+					      (char)(dev_info->base8));
+
+			/* set video mode */
+			vdata = (uint8_t *)&dlfb_video_modes[i];
+			for (j = 0; j < 29; j++)
+				bufptr = dlfb_set_register(bufptr, j, vdata[j]);
+
+			/* blank */
+			bufptr = dlfb_set_register(bufptr, 0x1F, 0x00);
+
+			/* end registers */
+			bufptr = dlfb_set_register(bufptr, 0xFF, 0xFF);
+
+			/* send */
+			ret = dlfb_bulk_msg(dev_info, bufptr - dev_info->buf);
+			printk("ret bulk 2: %d %d\n", ret,
+			       bufptr - dev_info->buf);
+
+			/* flush */
+			ret = dlfb_bulk_msg(dev_info, 0);
+			printk("ret bulk 3: %d\n", ret);
+
+			dev_info->screen_size = width * height * (FB_BPP / 8);
+			dev_info->line_length = width * (FB_BPP / 8);
+
+			return 0;
+		}
+	}
+
+	return -1;
+}
+
+#endif
diff --git a/drivers/staging/vt6655/80211hdr.h b/drivers/staging/vt6655/80211hdr.h
new file mode 100644
index 00000000000..b4bbb8d3c24
--- /dev/null
+++ b/drivers/staging/vt6655/80211hdr.h
@@ -0,0 +1,357 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: 80211hdr.h
+ *
+ * Purpose: Defines the macros, types, and functions for dealing
+ *          with 802.11 MAC headers.
+ *
+ * Author: Lyndon Chen
+ *
+ * Date: Apr 8, 2002
+ *
+ */
+
+
+
+#ifndef __80211HDR_H__
+#define __80211HDR_H__
+
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+
+/*---------------------  Export Definitions -------------------------*/
+// bit type
+#define BIT0	0x00000001
+#define BIT1	0x00000002
+#define BIT2	0x00000004
+#define BIT3	0x00000008
+#define BIT4	0x00000010
+#define BIT5	0x00000020
+#define BIT6	0x00000040
+#define BIT7	0x00000080
+#define BIT8	0x00000100
+#define BIT9	0x00000200
+#define BIT10	0x00000400
+#define BIT11	0x00000800
+#define BIT12	0x00001000
+#define BIT13	0x00002000
+#define BIT14	0x00004000
+#define BIT15	0x00008000
+#define BIT16	0x00010000
+#define BIT17	0x00020000
+#define BIT18	0x00040000
+#define BIT19	0x00080000
+#define BIT20	0x00100000
+#define BIT21	0x00200000
+#define BIT22	0x00400000
+#define BIT23	0x00800000
+#define BIT24	0x01000000
+#define BIT25	0x02000000
+#define BIT26	0x04000000
+#define BIT27	0x08000000
+#define BIT28	0x10000000
+#define BIT29	0x20000000
+#define BIT30	0x40000000
+#define BIT31	0x80000000
+
+// 802.11 frame related, defined as 802.11 spec
+#define WLAN_ADDR_LEN               6
+#define WLAN_CRC_LEN                4
+#define WLAN_CRC32_LEN              4
+#define WLAN_FCS_LEN                4
+#define WLAN_BSSID_LEN              6
+#define WLAN_BSS_TS_LEN             8
+#define WLAN_HDR_ADDR2_LEN          16
+#define WLAN_HDR_ADDR3_LEN          24
+#define WLAN_HDR_ADDR4_LEN          30
+#define WLAN_IEHDR_LEN              2
+#define WLAN_SSID_MAXLEN            32
+//#define WLAN_RATES_MAXLEN           255
+#define WLAN_RATES_MAXLEN           16
+#define WLAN_RATES_MAXLEN_11B       4
+#define WLAN_RSN_MAXLEN             32
+#define WLAN_DATA_MAXLEN            2312
+#define WLAN_A3FR_MAXLEN            (WLAN_HDR_ADDR3_LEN + WLAN_DATA_MAXLEN + WLAN_CRC_LEN)
+
+
+#define WLAN_BEACON_FR_MAXLEN       WLAN_A3FR_MAXLEN
+#define WLAN_ATIM_FR_MAXLEN         (WLAN_HDR_ADDR3_LEN + 0)
+#define WLAN_NULLDATA_FR_MAXLEN     (WLAN_HDR_ADDR3_LEN + 0)
+#define WLAN_DISASSOC_FR_MAXLEN     (WLAN_HDR_ADDR3_LEN + 2)
+#define WLAN_ASSOCREQ_FR_MAXLEN     WLAN_A3FR_MAXLEN
+#define WLAN_ASSOCRESP_FR_MAXLEN    WLAN_A3FR_MAXLEN
+#define WLAN_REASSOCREQ_FR_MAXLEN   WLAN_A3FR_MAXLEN
+#define WLAN_REASSOCRESP_FR_MAXLEN  WLAN_A3FR_MAXLEN
+#define WLAN_PROBEREQ_FR_MAXLEN     WLAN_A3FR_MAXLEN
+#define WLAN_PROBERESP_FR_MAXLEN    WLAN_A3FR_MAXLEN
+#define WLAN_AUTHEN_FR_MAXLEN       WLAN_A3FR_MAXLEN
+#define WLAN_DEAUTHEN_FR_MAXLEN     (WLAN_HDR_ADDR3_LEN + 2)
+
+
+#define WLAN_WEP_NKEYS              4
+#define WLAN_WEP40_KEYLEN           5
+#define WLAN_WEP104_KEYLEN          13
+#define WLAN_WEP232_KEYLEN          29
+//#define WLAN_WEPMAX_KEYLEN          29
+#define WLAN_WEPMAX_KEYLEN          32
+#define WLAN_CHALLENGE_IE_MAXLEN    255
+#define WLAN_CHALLENGE_IE_LEN       130
+#define WLAN_CHALLENGE_LEN          128
+#define WLAN_WEP_IV_LEN             4
+#define WLAN_WEP_ICV_LEN            4
+#define WLAN_FRAGS_MAX              16
+
+// Frame Type
+#define WLAN_TYPE_MGR 0x00
+#define WLAN_TYPE_CTL  0x01
+#define WLAN_TYPE_DATA 0x02
+
+#define WLAN_FTYPE_MGMT 0x00
+#define WLAN_FTYPE_CTL  0x01
+#define WLAN_FTYPE_DATA 0x02
+
+
+// Frame Subtypes
+#define WLAN_FSTYPE_ASSOCREQ        0x00
+#define WLAN_FSTYPE_ASSOCRESP       0x01
+#define WLAN_FSTYPE_REASSOCREQ      0x02
+#define WLAN_FSTYPE_REASSOCRESP     0x03
+#define WLAN_FSTYPE_PROBEREQ        0x04
+#define WLAN_FSTYPE_PROBERESP       0x05
+#define WLAN_FSTYPE_BEACON          0x08
+#define WLAN_FSTYPE_ATIM            0x09
+#define WLAN_FSTYPE_DISASSOC        0x0a
+#define WLAN_FSTYPE_AUTHEN          0x0b
+#define WLAN_FSTYPE_DEAUTHEN        0x0c
+#define WLAN_FSTYPE_ACTION          0x0d
+
+// Control
+#define WLAN_FSTYPE_PSPOLL          0x0a
+#define WLAN_FSTYPE_RTS             0x0b
+#define WLAN_FSTYPE_CTS             0x0c
+#define WLAN_FSTYPE_ACK             0x0d
+#define WLAN_FSTYPE_CFEND           0x0e
+#define WLAN_FSTYPE_CFENDCFACK      0x0f
+
+// Data
+#define WLAN_FSTYPE_DATAONLY        0x00
+#define WLAN_FSTYPE_DATA_CFACK      0x01
+#define WLAN_FSTYPE_DATA_CFPOLL     0x02
+#define WLAN_FSTYPE_DATA_CFACK_CFPOLL   0x03
+#define WLAN_FSTYPE_NULL            0x04
+#define WLAN_FSTYPE_CFACK           0x05
+#define WLAN_FSTYPE_CFPOLL          0x06
+#define WLAN_FSTYPE_CFACK_CFPOLL    0x07
+
+
+#ifdef __BIG_ENDIAN
+
+// GET & SET Frame Control bit
+#define WLAN_GET_FC_PRVER(n)    ((((WORD)(n) >> 8) & (BIT0 | BIT1))
+#define WLAN_GET_FC_FTYPE(n)    ((((WORD)(n) >> 8) & (BIT2 | BIT3)) >> 2)
+#define WLAN_GET_FC_FSTYPE(n)   ((((WORD)(n) >> 8) & (BIT4|BIT5|BIT6|BIT7)) >> 4)
+#define WLAN_GET_FC_TODS(n)     ((((WORD)(n) << 8) & (BIT8)) >> 8)
+#define WLAN_GET_FC_FROMDS(n)   ((((WORD)(n) << 8) & (BIT9)) >> 9)
+#define WLAN_GET_FC_MOREFRAG(n) ((((WORD)(n) << 8) & (BIT10)) >> 10)
+#define WLAN_GET_FC_RETRY(n)    ((((WORD)(n) << 8) & (BIT11)) >> 11)
+#define WLAN_GET_FC_PWRMGT(n)   ((((WORD)(n) << 8) & (BIT12)) >> 12)
+#define WLAN_GET_FC_MOREDATA(n) ((((WORD)(n) << 8) & (BIT13)) >> 13)
+#define WLAN_GET_FC_ISWEP(n)    ((((WORD)(n) << 8) & (BIT14)) >> 14)
+#define WLAN_GET_FC_ORDER(n)    ((((WORD)(n) << 8) & (BIT15)) >> 15)
+
+// Sequence Field bit
+#define WLAN_GET_SEQ_FRGNUM(n) (((WORD)(n) >> 8) & (BIT0|BIT1|BIT2|BIT3))
+#define WLAN_GET_SEQ_SEQNUM(n) ((((WORD)(n) >> 8) & (~(BIT0|BIT1|BIT2|BIT3))) >> 4)
+
+
+// Capability Field bit
+#define WLAN_GET_CAP_INFO_ESS(n)           (((n) >> 8) & BIT0)
+#define WLAN_GET_CAP_INFO_IBSS(n)          ((((n) >> 8) & BIT1) >> 1)
+#define WLAN_GET_CAP_INFO_CFPOLLABLE(n)    ((((n) >> 8) & BIT2) >> 2)
+#define WLAN_GET_CAP_INFO_CFPOLLREQ(n)     ((((n) >> 8) & BIT3) >> 3)
+#define WLAN_GET_CAP_INFO_PRIVACY(n)       ((((n) >> 8) & BIT4) >> 4)
+#define WLAN_GET_CAP_INFO_SHORTPREAMBLE(n) ((((n) >> 8) & BIT5) >> 5)
+#define WLAN_GET_CAP_INFO_PBCC(n)          ((((n) >> 8) & BIT6) >> 6)
+#define WLAN_GET_CAP_INFO_AGILITY(n)       ((((n) >> 8) & BIT7) >> 7)
+#define WLAN_GET_CAP_INFO_SPECTRUMMNG(n)   ((((n))      & BIT8) >> 10)
+#define WLAN_GET_CAP_INFO_SHORTSLOTTIME(n) ((((n))      & BIT10) >> 10)
+#define WLAN_GET_CAP_INFO_DSSSOFDM(n)      ((((n))      & BIT13) >> 13)
+#define WLAN_GET_CAP_INFO_GRPACK(n)        ((((n))      & BIT14) >> 14)
+
+
+#else
+
+// GET & SET Frame Control bit
+#define WLAN_GET_FC_PRVER(n)    (((WORD)(n)) & (BIT0 | BIT1))
+#define WLAN_GET_FC_FTYPE(n)    ((((WORD)(n)) & (BIT2 | BIT3)) >> 2)
+#define WLAN_GET_FC_FSTYPE(n)   ((((WORD)(n)) & (BIT4|BIT5|BIT6|BIT7)) >> 4)
+#define WLAN_GET_FC_TODS(n)     ((((WORD)(n)) & (BIT8)) >> 8)
+#define WLAN_GET_FC_FROMDS(n)   ((((WORD)(n)) & (BIT9)) >> 9)
+#define WLAN_GET_FC_MOREFRAG(n) ((((WORD)(n)) & (BIT10)) >> 10)
+#define WLAN_GET_FC_RETRY(n)    ((((WORD)(n)) & (BIT11)) >> 11)
+#define WLAN_GET_FC_PWRMGT(n)   ((((WORD)(n)) & (BIT12)) >> 12)
+#define WLAN_GET_FC_MOREDATA(n) ((((WORD)(n)) & (BIT13)) >> 13)
+#define WLAN_GET_FC_ISWEP(n)    ((((WORD)(n)) & (BIT14)) >> 14)
+#define WLAN_GET_FC_ORDER(n)    ((((WORD)(n)) & (BIT15)) >> 15)
+
+
+// Sequence Field bit
+#define WLAN_GET_SEQ_FRGNUM(n) (((WORD)(n)) & (BIT0|BIT1|BIT2|BIT3))
+#define WLAN_GET_SEQ_SEQNUM(n) ((((WORD)(n)) & (~(BIT0|BIT1|BIT2|BIT3))) >> 4)
+
+
+// Capability Field bit
+#define WLAN_GET_CAP_INFO_ESS(n)           ((n) & BIT0)
+#define WLAN_GET_CAP_INFO_IBSS(n)          (((n) & BIT1) >> 1)
+#define WLAN_GET_CAP_INFO_CFPOLLABLE(n)    (((n) & BIT2) >> 2)
+#define WLAN_GET_CAP_INFO_CFPOLLREQ(n)     (((n) & BIT3) >> 3)
+#define WLAN_GET_CAP_INFO_PRIVACY(n)       (((n) & BIT4) >> 4)
+#define WLAN_GET_CAP_INFO_SHORTPREAMBLE(n) (((n) & BIT5) >> 5)
+#define WLAN_GET_CAP_INFO_PBCC(n)          (((n) & BIT6) >> 6)
+#define WLAN_GET_CAP_INFO_AGILITY(n)       (((n) & BIT7) >> 7)
+#define WLAN_GET_CAP_INFO_SPECTRUMMNG(n)   (((n) & BIT8) >> 10)
+#define WLAN_GET_CAP_INFO_SHORTSLOTTIME(n) (((n) & BIT10) >> 10)
+#define WLAN_GET_CAP_INFO_DSSSOFDM(n)      (((n) & BIT13) >> 13)
+#define WLAN_GET_CAP_INFO_GRPACK(n)        (((n) & BIT14) >> 14)
+
+
+#endif //#ifdef __BIG_ENDIAN
+
+
+#define WLAN_SET_CAP_INFO_ESS(n)           (n)
+#define WLAN_SET_CAP_INFO_IBSS(n)          ((n) << 1)
+#define WLAN_SET_CAP_INFO_CFPOLLABLE(n)    ((n) << 2)
+#define WLAN_SET_CAP_INFO_CFPOLLREQ(n)     ((n) << 3)
+#define WLAN_SET_CAP_INFO_PRIVACY(n)       ((n) << 4)
+#define WLAN_SET_CAP_INFO_SHORTPREAMBLE(n) ((n) << 5)
+#define WLAN_SET_CAP_INFO_SPECTRUMMNG(n)   ((n) << 8)
+#define WLAN_SET_CAP_INFO_PBCC(n)          ((n) << 6)
+#define WLAN_SET_CAP_INFO_AGILITY(n)       ((n) << 7)
+#define WLAN_SET_CAP_INFO_SHORTSLOTTIME(n) ((n) << 10)
+#define WLAN_SET_CAP_INFO_DSSSOFDM(n)      ((n) << 13)
+#define WLAN_SET_CAP_INFO_GRPACK(n)        ((n) << 14)
+
+
+#define WLAN_SET_FC_PRVER(n)    ((WORD)(n))
+#define WLAN_SET_FC_FTYPE(n)    (((WORD)(n)) << 2)
+#define WLAN_SET_FC_FSTYPE(n)   (((WORD)(n)) << 4)
+#define WLAN_SET_FC_TODS(n)     (((WORD)(n)) << 8)
+#define WLAN_SET_FC_FROMDS(n)   (((WORD)(n)) << 9)
+#define WLAN_SET_FC_MOREFRAG(n) (((WORD)(n)) << 10)
+#define WLAN_SET_FC_RETRY(n)    (((WORD)(n)) << 11)
+#define WLAN_SET_FC_PWRMGT(n)   (((WORD)(n)) << 12)
+#define WLAN_SET_FC_MOREDATA(n) (((WORD)(n)) << 13)
+#define WLAN_SET_FC_ISWEP(n)    (((WORD)(n)) << 14)
+#define WLAN_SET_FC_ORDER(n)    (((WORD)(n)) << 15)
+
+#define WLAN_SET_SEQ_FRGNUM(n) ((WORD)(n))
+#define WLAN_SET_SEQ_SEQNUM(n) (((WORD)(n)) << 4)
+
+// ERP Field bit
+
+#define WLAN_GET_ERP_NONERP_PRESENT(n)     ((n) & BIT0)
+#define WLAN_GET_ERP_USE_PROTECTION(n)     (((n) & BIT1) >> 1)
+#define WLAN_GET_ERP_BARKER_MODE(n)        (((n) & BIT2) >> 2)
+
+#define WLAN_SET_ERP_NONERP_PRESENT(n)     (n)
+#define WLAN_SET_ERP_USE_PROTECTION(n)     ((n) << 1)
+#define WLAN_SET_ERP_BARKER_MODE(n)        ((n) << 2)
+
+
+
+// Support & Basic Rates field
+#define WLAN_MGMT_IS_BASICRATE(b)    ((b) & BIT7)
+#define WLAN_MGMT_GET_RATE(b)        ((b) & ~BIT7)
+
+// TIM field
+#define WLAN_MGMT_IS_MULTICAST_TIM(b)   ((b) & BIT0)
+#define WLAN_MGMT_GET_TIM_OFFSET(b)     (((b) & ~BIT0) >> 1)
+
+// 3-Addr & 4-Addr
+#define WLAN_HDR_A3_DATA_PTR(p) (((PBYTE)(p)) + WLAN_HDR_ADDR3_LEN)
+#define WLAN_HDR_A4_DATA_PTR(p) (((PBYTE)(p)) + WLAN_HDR_ADDR4_LEN)
+
+// IEEE ADDR
+#define IEEE_ADDR_UNIVERSAL         0x02
+#define IEEE_ADDR_GROUP             0x01
+
+typedef struct {
+    BYTE            abyAddr[6];
+} IEEE_ADDR, *PIEEE_ADDR;
+
+// 802.11 Header Format
+
+typedef struct tagWLAN_80211HDR_A2 {
+
+    WORD    wFrameCtl;
+    WORD    wDurationID;
+    BYTE    abyAddr1[WLAN_ADDR_LEN];
+    BYTE    abyAddr2[WLAN_ADDR_LEN];
+
+}__attribute__ ((__packed__))
+WLAN_80211HDR_A2, *PWLAN_80211HDR_A2;
+
+typedef struct tagWLAN_80211HDR_A3 {
+
+    WORD    wFrameCtl;
+    WORD    wDurationID;
+    BYTE    abyAddr1[WLAN_ADDR_LEN];
+    BYTE    abyAddr2[WLAN_ADDR_LEN];
+    BYTE    abyAddr3[WLAN_ADDR_LEN];
+    WORD    wSeqCtl;
+
+}__attribute__ ((__packed__))
+WLAN_80211HDR_A3, *PWLAN_80211HDR_A3;
+
+typedef struct tagWLAN_80211HDR_A4 {
+
+    WORD    wFrameCtl;
+    WORD    wDurationID;
+    BYTE    abyAddr1[WLAN_ADDR_LEN];
+    BYTE    abyAddr2[WLAN_ADDR_LEN];
+    BYTE    abyAddr3[WLAN_ADDR_LEN];
+    WORD    wSeqCtl;
+    BYTE    abyAddr4[WLAN_ADDR_LEN];
+
+}__attribute__ ((__packed__))
+WLAN_80211HDR_A4, *PWLAN_80211HDR_A4;
+
+
+typedef union tagUWLAN_80211HDR {
+
+    WLAN_80211HDR_A2        sA2;
+    WLAN_80211HDR_A3        sA3;
+    WLAN_80211HDR_A4        sA4;
+
+} UWLAN_80211HDR, *PUWLAN_80211HDR;
+
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+
+
+
+#endif // __80211HDR_H__
+
+
diff --git a/drivers/staging/vt6655/80211mgr.c b/drivers/staging/vt6655/80211mgr.c
new file mode 100644
index 00000000000..84745fb6b03
--- /dev/null
+++ b/drivers/staging/vt6655/80211mgr.c
@@ -0,0 +1,1050 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: 80211mgr.c
+ *
+ * Purpose: Handles the 802.11 managment support functions
+ *
+ * Author: Lyndon Chen
+ *
+ * Date: May 8, 2002
+ *
+ * Functions:
+ *      vMgrEncodeBeacon - Encode the Beacon frame
+ *      vMgrDecodeBeacon - Decode the Beacon frame
+ *      vMgrEncodeIBSSATIM - Encode the IBSS ATIM frame
+ *      vMgrDecodeIBSSATIM - Decode the IBSS ATIM frame
+ *      vMgrEncodeDisassociation - Encode the Disassociation frame
+ *      vMgrDecodeDisassociation - Decode the Disassociation frame
+ *      vMgrEncodeAssocRequest - Encode the Association request frame
+ *      vMgrDecodeAssocRequest - Decode the Association request frame
+ *      vMgrEncodeAssocResponse - Encode the Association response frame
+ *      vMgrDecodeAssocResponse - Decode the Association response frame
+ *      vMgrEncodeReAssocRequest - Encode the ReAssociation request frame
+ *      vMgrDecodeReAssocRequest - Decode the ReAssociation request frame
+ *      vMgrEncodeProbeRequest - Encode the Probe request frame
+ *      vMgrDecodeProbeRequest - Decode the Probe request frame
+ *      vMgrEncodeProbeResponse - Encode the Probe response frame
+ *      vMgrDecodeProbeResponse - Decode the Probe response frame
+ *      vMgrEncodeAuthen - Encode the Authentication frame
+ *      vMgrDecodeAuthen - Decode the Authentication frame
+ *      vMgrEncodeDeauthen - Encode the DeAuthentication frame
+ *      vMgrDecodeDeauthen - Decode the DeAuthentication frame
+ *      vMgrEncodeReassocResponse - Encode the Reassociation response frame
+ *      vMgrDecodeReassocResponse - Decode the Reassociation response frame
+ *
+ * Revision History:
+ *
+ */
+
+
+
+#if !defined(__TMACRO_H__)
+#include "tmacro.h"
+#endif
+#if !defined(__TETHER_H__)
+#include "tether.h"
+#endif
+#if !defined(__80211MGR_H__)
+#include "80211mgr.h"
+#endif
+#if !defined(__80211HDR_H__)
+#include "80211hdr.h"
+#endif
+#if !defined(__DEVICE_H__)
+#include "device.h"
+#endif
+#if !defined(__WPA_H__)
+#include "wpa.h"
+#endif
+
+
+
+/*---------------------  Static Definitions -------------------------*/
+
+
+
+/*---------------------  Static Classes  ----------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+
+static int          msglevel                =MSG_LEVEL_INFO;
+//static int          msglevel                =MSG_LEVEL_DEBUG;
+/*---------------------  Static Functions  --------------------------*/
+
+
+
+/*---------------------  Export Variables  --------------------------*/
+
+
+/*---------------------  Export Functions  --------------------------*/
+
+
+/*+
+ *
+ * Routine Description:
+ * Encode Beacon frame body offset
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+VOID
+vMgrEncodeBeacon(
+    IN  PWLAN_FR_BEACON  pFrame
+     )
+{
+    pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
+
+    // Fixed Fields
+    pFrame->pqwTimestamp = (PQWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                    + WLAN_BEACON_OFF_TS);
+    pFrame->pwBeaconInterval = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                       + WLAN_BEACON_OFF_BCN_INT);
+    pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                + WLAN_BEACON_OFF_CAPINFO);
+
+    pFrame->len = WLAN_HDR_ADDR3_LEN + WLAN_BEACON_OFF_SSID;
+
+    return;
+}
+
+/*+
+ *
+ * Routine Description:
+ * Decode Beacon frame body offset
+ *
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+
+VOID
+vMgrDecodeBeacon(
+    IN  PWLAN_FR_BEACON  pFrame
+    )
+{
+    PWLAN_IE        pItem;
+
+    pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
+
+    // Fixed Fields
+    pFrame->pqwTimestamp = (PQWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                    + WLAN_BEACON_OFF_TS);
+    pFrame->pwBeaconInterval = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                       + WLAN_BEACON_OFF_BCN_INT);
+    pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                + WLAN_BEACON_OFF_CAPINFO);
+
+    // Information elements
+    pItem = (PWLAN_IE)((PBYTE)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3)))
+                       + WLAN_BEACON_OFF_SSID);
+    while( ((PBYTE)pItem) < (pFrame->pBuf + pFrame->len) ){
+
+        switch (pItem->byElementID) {
+            case WLAN_EID_SSID:
+                if (pFrame->pSSID == NULL)
+                    pFrame->pSSID = (PWLAN_IE_SSID)pItem;
+                break;
+            case WLAN_EID_SUPP_RATES:
+                if (pFrame->pSuppRates == NULL)
+                    pFrame->pSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
+                break;
+            case WLAN_EID_FH_PARMS:
+                //pFrame->pFHParms = (PWLAN_IE_FH_PARMS)pItem;
+                break;
+            case WLAN_EID_DS_PARMS:
+                if (pFrame->pDSParms == NULL)
+                    pFrame->pDSParms = (PWLAN_IE_DS_PARMS)pItem;
+                break;
+            case WLAN_EID_CF_PARMS:
+                if (pFrame->pCFParms == NULL)
+                    pFrame->pCFParms = (PWLAN_IE_CF_PARMS)pItem;
+                break;
+            case WLAN_EID_IBSS_PARMS:
+                if (pFrame->pIBSSParms == NULL)
+                    pFrame->pIBSSParms = (PWLAN_IE_IBSS_PARMS)pItem;
+                break;
+            case WLAN_EID_TIM:
+                if (pFrame->pTIM == NULL)
+                    pFrame->pTIM = (PWLAN_IE_TIM)pItem;
+                break;
+
+            case WLAN_EID_RSN:
+                if (pFrame->pRSN == NULL) {
+                    pFrame->pRSN = (PWLAN_IE_RSN)pItem;
+                }
+                break;
+            case WLAN_EID_RSN_WPA:
+                if (pFrame->pRSNWPA == NULL) {
+                    if (WPAb_Is_RSN((PWLAN_IE_RSN_EXT)pItem) == TRUE)
+                        pFrame->pRSNWPA = (PWLAN_IE_RSN_EXT)pItem;
+                }
+                break;
+
+            case WLAN_EID_ERP:
+                if (pFrame->pERP == NULL)
+                    pFrame->pERP = (PWLAN_IE_ERP)pItem;
+                break;
+            case WLAN_EID_EXTSUPP_RATES:
+                if (pFrame->pExtSuppRates == NULL)
+                    pFrame->pExtSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
+                break;
+
+            case WLAN_EID_COUNTRY:      //7
+                if (pFrame->pIE_Country == NULL)
+                    pFrame->pIE_Country = (PWLAN_IE_COUNTRY)pItem;
+                break;
+
+            case WLAN_EID_PWR_CONSTRAINT:   //32
+                if (pFrame->pIE_PowerConstraint == NULL)
+                    pFrame->pIE_PowerConstraint = (PWLAN_IE_PW_CONST)pItem;
+                break;
+
+            case WLAN_EID_CH_SWITCH:    //37
+                if (pFrame->pIE_CHSW == NULL)
+                    pFrame->pIE_CHSW = (PWLAN_IE_CH_SW)pItem;
+                break;
+
+            case WLAN_EID_QUIET:        //40
+                if (pFrame->pIE_Quiet == NULL)
+                    pFrame->pIE_Quiet = (PWLAN_IE_QUIET)pItem;
+                break;
+
+            case WLAN_EID_IBSS_DFS:
+                if (pFrame->pIE_IBSSDFS == NULL)
+                    pFrame->pIE_IBSSDFS = (PWLAN_IE_IBSS_DFS)pItem;
+                break;
+
+            default:
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Unrecognized EID=%dd in beacon decode.\n", pItem->byElementID);
+                break;
+
+        }
+        pItem = (PWLAN_IE)(((PBYTE)pItem) + 2 + pItem->len);
+    }
+
+    return;
+}
+
+
+/*+
+ *
+ * Routine Description:
+ *  Encode IBSS ATIM
+ *
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+
+VOID
+vMgrEncodeIBSSATIM(
+    IN  PWLAN_FR_IBSSATIM   pFrame
+    )
+{
+    pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
+    pFrame->len = WLAN_HDR_ADDR3_LEN;
+
+    return;
+}
+
+
+/*+
+ *
+ * Routine Description:
+ *  Decode IBSS ATIM
+ *
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+VOID
+vMgrDecodeIBSSATIM(
+    IN  PWLAN_FR_IBSSATIM   pFrame
+    )
+{
+    pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
+
+    return;
+}
+
+
+/*+
+ *
+ * Routine Description:
+ *  Encode Disassociation
+ *
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+VOID
+vMgrEncodeDisassociation(
+    IN  PWLAN_FR_DISASSOC  pFrame
+    )
+{
+    pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
+
+
+    // Fixed Fields
+    pFrame->pwReason = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                               + WLAN_DISASSOC_OFF_REASON);
+    pFrame->len = WLAN_HDR_ADDR3_LEN + WLAN_DISASSOC_OFF_REASON + sizeof(*(pFrame->pwReason));
+
+    return;
+}
+
+
+/*+
+ *
+ * Routine Description:
+ *  Decode Disassociation
+ *
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+VOID
+vMgrDecodeDisassociation(
+    IN  PWLAN_FR_DISASSOC  pFrame
+    )
+{
+    pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
+
+    // Fixed Fields
+    pFrame->pwReason = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                               + WLAN_DISASSOC_OFF_REASON);
+
+    return;
+}
+
+/*+
+ *
+ * Routine Description:
+ *  Encode Association Request
+ *
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+
+VOID
+vMgrEncodeAssocRequest(
+    IN  PWLAN_FR_ASSOCREQ  pFrame
+    )
+{
+    pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
+    // Fixed Fields
+    pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                + WLAN_ASSOCREQ_OFF_CAP_INFO);
+    pFrame->pwListenInterval = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                       + WLAN_ASSOCREQ_OFF_LISTEN_INT);
+    pFrame->len = WLAN_HDR_ADDR3_LEN + WLAN_ASSOCREQ_OFF_LISTEN_INT + sizeof(*(pFrame->pwListenInterval));
+    return;
+}
+
+
+/*+
+ *
+ * Routine Description: (AP)
+ *  Decode Association Request
+ *
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+VOID
+vMgrDecodeAssocRequest(
+    IN  PWLAN_FR_ASSOCREQ  pFrame
+    )
+{
+    PWLAN_IE   pItem;
+
+    pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
+    // Fixed Fields
+    pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                + WLAN_ASSOCREQ_OFF_CAP_INFO);
+    pFrame->pwListenInterval = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                + WLAN_ASSOCREQ_OFF_LISTEN_INT);
+
+    // Information elements
+    pItem = (PWLAN_IE)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                            + WLAN_ASSOCREQ_OFF_SSID);
+
+    while (((PBYTE)pItem) < (pFrame->pBuf + pFrame->len)) {
+        switch (pItem->byElementID){
+            case WLAN_EID_SSID:
+                if (pFrame->pSSID == NULL)
+                    pFrame->pSSID = (PWLAN_IE_SSID)pItem;
+                break;
+            case WLAN_EID_SUPP_RATES:
+                if (pFrame->pSuppRates == NULL)
+                    pFrame->pSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
+                break;
+
+            case WLAN_EID_RSN:
+                if (pFrame->pRSN == NULL) {
+                    pFrame->pRSN = (PWLAN_IE_RSN)pItem;
+                }
+                break;
+            case WLAN_EID_RSN_WPA:
+                if (pFrame->pRSNWPA == NULL) {
+                    if (WPAb_Is_RSN((PWLAN_IE_RSN_EXT)pItem) == TRUE)
+                        pFrame->pRSNWPA = (PWLAN_IE_RSN_EXT)pItem;
+                }
+                break;
+            case WLAN_EID_EXTSUPP_RATES:
+                if (pFrame->pExtSuppRates == NULL)
+                    pFrame->pExtSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
+                break;
+
+            default:
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Unrecognized EID=%dd in assocreq decode.\n",
+                        pItem->byElementID);
+                break;
+        }
+        pItem = (PWLAN_IE)(((PBYTE)pItem) + 2 + pItem->len);
+    }
+    return;
+}
+
+/*+
+ *
+ * Routine Description: (AP)
+ *  Encode Association Response
+ *
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+VOID
+vMgrEncodeAssocResponse(
+    IN  PWLAN_FR_ASSOCRESP  pFrame
+     )
+{
+    pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
+
+    // Fixed Fields
+    pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                + WLAN_ASSOCRESP_OFF_CAP_INFO);
+    pFrame->pwStatus = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                               + WLAN_ASSOCRESP_OFF_STATUS);
+    pFrame->pwAid = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                            + WLAN_ASSOCRESP_OFF_AID);
+    pFrame->len = WLAN_HDR_ADDR3_LEN + WLAN_ASSOCRESP_OFF_AID
+                  + sizeof(*(pFrame->pwAid));
+
+    return;
+}
+
+
+/*+
+ *
+ * Routine Description:
+ *  Decode Association Response
+ *
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+VOID
+vMgrDecodeAssocResponse(
+    IN PWLAN_FR_ASSOCRESP  pFrame
+     )
+{
+    PWLAN_IE   pItem;
+
+    pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
+
+    // Fixed Fields
+    pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                + WLAN_ASSOCRESP_OFF_CAP_INFO);
+    pFrame->pwStatus = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                               + WLAN_ASSOCRESP_OFF_STATUS);
+    pFrame->pwAid = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                            + WLAN_ASSOCRESP_OFF_AID);
+
+    // Information elements
+    pFrame->pSuppRates  = (PWLAN_IE_SUPP_RATES)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                           + WLAN_ASSOCRESP_OFF_SUPP_RATES);
+
+    pItem = (PWLAN_IE)(pFrame->pSuppRates);
+    pItem = (PWLAN_IE)(((PBYTE)pItem) + 2 + pItem->len);
+
+    if ((((PBYTE)pItem) < (pFrame->pBuf + pFrame->len)) && (pItem->byElementID == WLAN_EID_EXTSUPP_RATES)) {
+        pFrame->pExtSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "pFrame->pExtSuppRates=[%p].\n", pItem);
+    }
+    else {
+        pFrame->pExtSuppRates = NULL;
+    }
+    return;
+}
+
+
+/*+
+ *
+ * Routine Description:
+ *  Encode Reassociation Request
+ *
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+VOID
+vMgrEncodeReassocRequest(
+    IN  PWLAN_FR_REASSOCREQ  pFrame
+     )
+{
+    pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
+
+    // Fixed Fields
+    pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                + WLAN_REASSOCREQ_OFF_CAP_INFO);
+    pFrame->pwListenInterval = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                      + WLAN_REASSOCREQ_OFF_LISTEN_INT);
+    pFrame->pAddrCurrAP = (PIEEE_ADDR)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                       + WLAN_REASSOCREQ_OFF_CURR_AP);
+    pFrame->len = WLAN_HDR_ADDR3_LEN + WLAN_REASSOCREQ_OFF_CURR_AP + sizeof(*(pFrame->pAddrCurrAP));
+
+    return;
+}
+
+
+/*+
+ *
+ * Routine Description: (AP)
+ *  Decode Reassociation Request
+ *
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+
+VOID
+vMgrDecodeReassocRequest(
+    IN  PWLAN_FR_REASSOCREQ  pFrame
+     )
+{
+    PWLAN_IE   pItem;
+    pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
+
+    // Fixed Fields
+    pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                + WLAN_REASSOCREQ_OFF_CAP_INFO);
+    pFrame->pwListenInterval = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                      + WLAN_REASSOCREQ_OFF_LISTEN_INT);
+    pFrame->pAddrCurrAP = (PIEEE_ADDR)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                       + WLAN_REASSOCREQ_OFF_CURR_AP);
+
+    // Information elements
+    pItem = (PWLAN_IE)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                       + WLAN_REASSOCREQ_OFF_SSID);
+
+    while(((PBYTE)pItem) < (pFrame->pBuf + pFrame->len)) {
+
+        switch (pItem->byElementID){
+            case WLAN_EID_SSID:
+                if (pFrame->pSSID == NULL)
+                    pFrame->pSSID = (PWLAN_IE_SSID)pItem;
+                break;
+            case WLAN_EID_SUPP_RATES:
+                if (pFrame->pSuppRates == NULL)
+                    pFrame->pSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
+                break;
+
+            case WLAN_EID_RSN:
+                if (pFrame->pRSN == NULL) {
+                    pFrame->pRSN = (PWLAN_IE_RSN)pItem;
+                }
+                break;
+            case WLAN_EID_RSN_WPA:
+                if (pFrame->pRSNWPA == NULL) {
+                    if (WPAb_Is_RSN((PWLAN_IE_RSN_EXT)pItem) == TRUE)
+                        pFrame->pRSNWPA = (PWLAN_IE_RSN_EXT)pItem;
+                }
+                break;
+
+            case WLAN_EID_EXTSUPP_RATES:
+                if (pFrame->pExtSuppRates == NULL)
+                    pFrame->pExtSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
+                break;
+            default:
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Unrecognized EID=%dd in reassocreq decode.\n",
+                            pItem->byElementID);
+                break;
+        }
+        pItem = (PWLAN_IE)(((PBYTE)pItem) + 2 + pItem->len);
+    }
+    return;
+}
+
+
+
+/*+
+ *
+ * Routine Description:
+ *  Encode Probe Request
+ *
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+
+VOID
+vMgrEncodeProbeRequest(
+    IN PWLAN_FR_PROBEREQ  pFrame
+     )
+{
+    pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
+    pFrame->len = WLAN_HDR_ADDR3_LEN;
+    return;
+}
+
+/*+
+ *
+ * Routine Description:
+ *  Decode Probe Request
+ *
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+VOID
+vMgrDecodeProbeRequest(
+    IN PWLAN_FR_PROBEREQ  pFrame
+     )
+{
+    PWLAN_IE   pItem;
+
+    pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
+
+    // Information elements
+    pItem = (PWLAN_IE)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3)));
+
+    while( ((PBYTE)pItem) < (pFrame->pBuf + pFrame->len) ) {
+
+        switch (pItem->byElementID) {
+            case WLAN_EID_SSID:
+                if (pFrame->pSSID == NULL)
+                    pFrame->pSSID = (PWLAN_IE_SSID)pItem;
+                break;
+
+            case WLAN_EID_SUPP_RATES:
+                if (pFrame->pSuppRates == NULL)
+                    pFrame->pSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
+                break;
+
+            case WLAN_EID_EXTSUPP_RATES:
+                if (pFrame->pExtSuppRates == NULL)
+                    pFrame->pExtSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
+                break;
+
+            default:
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Bad EID=%dd in probereq\n", pItem->byElementID);
+                break;
+        }
+
+        pItem = (PWLAN_IE)(((PBYTE)pItem) + 2 +  pItem->len);
+    }
+    return;
+}
+
+
+/*+
+ *
+ * Routine Description:
+ *  Encode Probe Response
+ *
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+
+VOID
+vMgrEncodeProbeResponse(
+    IN PWLAN_FR_PROBERESP  pFrame
+    )
+{
+    pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
+
+    // Fixed Fields
+    pFrame->pqwTimestamp = (PQWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                    + WLAN_PROBERESP_OFF_TS);
+    pFrame->pwBeaconInterval = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                       + WLAN_PROBERESP_OFF_BCN_INT);
+    pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                + WLAN_PROBERESP_OFF_CAP_INFO);
+
+    pFrame->len = WLAN_HDR_ADDR3_LEN + WLAN_PROBERESP_OFF_CAP_INFO +
+                  sizeof(*(pFrame->pwCapInfo));
+
+    return;
+}
+
+
+
+/*+
+ *
+ * Routine Description:
+ *  Decode Probe Response
+ *
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+VOID
+vMgrDecodeProbeResponse(
+    IN PWLAN_FR_PROBERESP  pFrame
+    )
+{
+    PWLAN_IE    pItem;
+//    BYTE        byCheckEID = 0;
+
+
+    pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
+
+    // Fixed Fields
+    pFrame->pqwTimestamp = (PQWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                    + WLAN_PROBERESP_OFF_TS);
+    pFrame->pwBeaconInterval = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                       + WLAN_PROBERESP_OFF_BCN_INT);
+    pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                + WLAN_PROBERESP_OFF_CAP_INFO);
+
+    // Information elements
+    pItem = (PWLAN_IE)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                       + WLAN_PROBERESP_OFF_SSID);
+
+    while( ((PBYTE)pItem) < (pFrame->pBuf + pFrame->len) ) {
+		/*
+        if (pItem->byElementID < byCheckEID)
+            break;
+        else
+            byCheckEID = pItem->byElementID;
+*/
+        switch (pItem->byElementID) {
+            case WLAN_EID_SSID:
+                if (pFrame->pSSID == NULL)
+                pFrame->pSSID = (PWLAN_IE_SSID)pItem;
+                break;
+            case WLAN_EID_SUPP_RATES:
+                if (pFrame->pSuppRates == NULL)
+                pFrame->pSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
+                break;
+            case WLAN_EID_FH_PARMS:
+                break;
+            case WLAN_EID_DS_PARMS:
+                if (pFrame->pDSParms == NULL)
+                    pFrame->pDSParms = (PWLAN_IE_DS_PARMS)pItem;
+                break;
+            case WLAN_EID_CF_PARMS:
+                if (pFrame->pCFParms == NULL)
+                    pFrame->pCFParms = (PWLAN_IE_CF_PARMS)pItem;
+                break;
+            case WLAN_EID_IBSS_PARMS:
+                if (pFrame->pIBSSParms == NULL)
+                    pFrame->pIBSSParms = (PWLAN_IE_IBSS_PARMS)pItem;
+                break;
+
+            case WLAN_EID_RSN:
+                if (pFrame->pRSN == NULL) {
+                    pFrame->pRSN = (PWLAN_IE_RSN)pItem;
+                }
+                break;
+            case WLAN_EID_RSN_WPA:
+                if (pFrame->pRSNWPA == NULL) {
+                    if (WPAb_Is_RSN((PWLAN_IE_RSN_EXT)pItem) == TRUE)
+                        pFrame->pRSNWPA = (PWLAN_IE_RSN_EXT)pItem;
+                }
+                break;
+            case WLAN_EID_ERP:
+                if (pFrame->pERP == NULL)
+                    pFrame->pERP = (PWLAN_IE_ERP)pItem;
+                break;
+            case WLAN_EID_EXTSUPP_RATES:
+                if (pFrame->pExtSuppRates == NULL)
+                    pFrame->pExtSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
+                break;
+
+            case WLAN_EID_COUNTRY:      //7
+                if (pFrame->pIE_Country == NULL)
+                    pFrame->pIE_Country = (PWLAN_IE_COUNTRY)pItem;
+                break;
+
+            case WLAN_EID_PWR_CONSTRAINT:   //32
+                if (pFrame->pIE_PowerConstraint == NULL)
+                    pFrame->pIE_PowerConstraint = (PWLAN_IE_PW_CONST)pItem;
+                break;
+
+            case WLAN_EID_CH_SWITCH:    //37
+                if (pFrame->pIE_CHSW == NULL)
+                    pFrame->pIE_CHSW = (PWLAN_IE_CH_SW)pItem;
+                break;
+
+            case WLAN_EID_QUIET:        //40
+                if (pFrame->pIE_Quiet == NULL)
+                    pFrame->pIE_Quiet = (PWLAN_IE_QUIET)pItem;
+                break;
+
+            case WLAN_EID_IBSS_DFS:
+                if (pFrame->pIE_IBSSDFS == NULL)
+                    pFrame->pIE_IBSSDFS = (PWLAN_IE_IBSS_DFS)pItem;
+                break;
+
+            default:
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Bad EID=%dd in proberesp\n", pItem->byElementID);
+                break;
+        }
+
+        pItem = (PWLAN_IE)(((PBYTE)pItem) + 2 +  pItem->len);
+    }
+    return;
+}
+
+
+/*+
+ *
+ * Routine Description:
+ *     Encode Authentication frame
+ *
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+VOID
+vMgrEncodeAuthen(
+    IN  PWLAN_FR_AUTHEN  pFrame
+    )
+{
+    pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
+
+    // Fixed Fields
+    pFrame->pwAuthAlgorithm = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                      + WLAN_AUTHEN_OFF_AUTH_ALG);
+    pFrame->pwAuthSequence = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                     + WLAN_AUTHEN_OFF_AUTH_SEQ);
+    pFrame->pwStatus = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                               + WLAN_AUTHEN_OFF_STATUS);
+    pFrame->len = WLAN_HDR_ADDR3_LEN + WLAN_AUTHEN_OFF_STATUS + sizeof(*(pFrame->pwStatus));
+
+    return;
+}
+
+
+/*+
+ *
+ * Routine Description:
+ *   Decode Authentication
+ *
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+VOID
+vMgrDecodeAuthen(
+    IN  PWLAN_FR_AUTHEN  pFrame
+    )
+{
+    PWLAN_IE    pItem;
+
+    pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
+
+    // Fixed Fields
+    pFrame->pwAuthAlgorithm = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                      + WLAN_AUTHEN_OFF_AUTH_ALG);
+    pFrame->pwAuthSequence = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                     + WLAN_AUTHEN_OFF_AUTH_SEQ);
+    pFrame->pwStatus = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                               + WLAN_AUTHEN_OFF_STATUS);
+
+    // Information elements
+    pItem = (PWLAN_IE)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                       + WLAN_AUTHEN_OFF_CHALLENGE);
+
+    if ((((PBYTE)pItem) < (pFrame->pBuf + pFrame->len)) && (pItem->byElementID == WLAN_EID_CHALLENGE)) {
+        pFrame->pChallenge = (PWLAN_IE_CHALLENGE)pItem;
+    }
+
+    return;
+}
+
+
+/*+
+ *
+ * Routine Description:
+ *   Encode Authentication
+ *
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+VOID
+vMgrEncodeDeauthen(
+    IN  PWLAN_FR_DEAUTHEN  pFrame
+    )
+{
+    pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
+
+    // Fixed Fields
+    pFrame->pwReason = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                               + WLAN_DEAUTHEN_OFF_REASON);
+    pFrame->len = WLAN_HDR_ADDR3_LEN + WLAN_DEAUTHEN_OFF_REASON + sizeof(*(pFrame->pwReason));
+
+    return;
+}
+
+
+/*+
+ *
+ * Routine Description:
+ *   Decode Deauthentication
+ *
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+VOID
+vMgrDecodeDeauthen(
+    IN  PWLAN_FR_DEAUTHEN  pFrame
+    )
+{
+    pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
+
+    // Fixed Fields
+    pFrame->pwReason = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                               + WLAN_DEAUTHEN_OFF_REASON);
+
+    return;
+}
+
+
+/*+
+ *
+ * Routine Description: (AP)
+ *   Encode Reassociation Response
+ *
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+VOID
+vMgrEncodeReassocResponse(
+    IN  PWLAN_FR_REASSOCRESP  pFrame
+     )
+{
+    pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
+
+    // Fixed Fields
+    pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                + WLAN_REASSOCRESP_OFF_CAP_INFO);
+    pFrame->pwStatus = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                               + WLAN_REASSOCRESP_OFF_STATUS);
+    pFrame->pwAid = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                            + WLAN_REASSOCRESP_OFF_AID);
+
+    pFrame->len = WLAN_HDR_ADDR3_LEN + WLAN_REASSOCRESP_OFF_AID + sizeof(*(pFrame->pwAid));
+
+    return;
+}
+
+
+/*+
+ *
+ * Routine Description:
+ *   Decode Reassociation Response
+ *
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+
+VOID
+vMgrDecodeReassocResponse(
+    IN  PWLAN_FR_REASSOCRESP  pFrame
+     )
+{
+    PWLAN_IE   pItem;
+
+    pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
+
+    // Fixed Fields
+    pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                + WLAN_REASSOCRESP_OFF_CAP_INFO);
+    pFrame->pwStatus = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                               + WLAN_REASSOCRESP_OFF_STATUS);
+    pFrame->pwAid = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                            + WLAN_REASSOCRESP_OFF_AID);
+
+    //Information elements
+    pFrame->pSuppRates = (PWLAN_IE_SUPP_RATES)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+                                               + WLAN_REASSOCRESP_OFF_SUPP_RATES);
+
+    pItem = (PWLAN_IE)(pFrame->pSuppRates);
+    pItem = (PWLAN_IE)(((PBYTE)pItem) + 2 + pItem->len);
+
+    if ((((PBYTE)pItem) < (pFrame->pBuf + pFrame->len)) && (pItem->byElementID == WLAN_EID_EXTSUPP_RATES)) {
+        pFrame->pExtSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
+    }
+    return;
+}
diff --git a/drivers/staging/vt6655/80211mgr.h b/drivers/staging/vt6655/80211mgr.h
new file mode 100644
index 00000000000..dc54a65edab
--- /dev/null
+++ b/drivers/staging/vt6655/80211mgr.h
@@ -0,0 +1,832 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: 80211mgr.h
+ *
+ * Purpose: Defines the macros, types, and functions for dealing
+ *          with 802.11 managment frames.
+ *
+ * Author: Lyndon Chen
+ *
+ * Date: May 8, 2002
+ *
+ */
+
+
+#ifndef __80211MGR_H__
+#define __80211MGR_H__
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+#if !defined(__80211HDR_H__)
+#include "80211hdr.h"
+#endif
+
+
+/*---------------------  Export Definitions -------------------------*/
+
+#define WLAN_MIN_ARRAY          1
+
+// Information Element ID value
+#define WLAN_EID_SSID           0
+#define WLAN_EID_SUPP_RATES     1
+#define WLAN_EID_FH_PARMS       2
+#define WLAN_EID_DS_PARMS       3
+#define WLAN_EID_CF_PARMS       4
+#define WLAN_EID_TIM            5
+#define WLAN_EID_IBSS_PARMS     6
+#define WLAN_EID_COUNTRY        7
+#define WLAN_EID_CHALLENGE      16
+#define WLAN_EID_PWR_CONSTRAINT 32
+#define WLAN_EID_PWR_CAPABILITY 33
+#define WLAN_EID_TPC_REQ        34
+#define WLAN_EID_TPC_REP        35
+#define WLAN_EID_SUPP_CH        36
+#define WLAN_EID_CH_SWITCH      37
+#define WLAN_EID_MEASURE_REQ    38
+#define WLAN_EID_MEASURE_REP    39
+#define WLAN_EID_QUIET          40
+#define WLAN_EID_IBSS_DFS       41
+#define WLAN_EID_ERP            42
+// reference 802.11i 7.3.2 table 20
+#define WLAN_EID_RSN            48
+#define WLAN_EID_EXTSUPP_RATES  50
+// reference WiFi WPA spec.
+#define WLAN_EID_RSN_WPA        221
+
+
+#define WLAN_EID_ERP_NONERP_PRESENT             0x01
+#define WLAN_EID_ERP_USE_PROTECTION             0x02
+#define WLAN_EID_ERP_BARKER_MODE                0x04
+
+// Reason Codes
+#define WLAN_MGMT_REASON_RSVD                       0
+#define WLAN_MGMT_REASON_UNSPEC                     1
+#define WLAN_MGMT_REASON_PRIOR_AUTH_INVALID         2
+#define WLAN_MGMT_REASON_DEAUTH_LEAVING             3
+#define WLAN_MGMT_REASON_DISASSOC_INACTIVE          4
+#define WLAN_MGMT_REASON_DISASSOC_AP_BUSY           5
+#define WLAN_MGMT_REASON_CLASS2_NONAUTH             6
+#define WLAN_MGMT_REASON_CLASS3_NONASSOC            7
+#define WLAN_MGMT_REASON_DISASSOC_STA_HASLEFT       8
+#define WLAN_MGMT_REASON_CANT_ASSOC_NONAUTH         9
+#define WLAN_MGMT_REASON_DISASSOC_PWR_CAP_UNACCEPT      10
+#define WLAN_MGMT_REASON_DISASSOC_SUPP_CH_UNACCEPT      11
+#define WLAN_MGMT_REASON_INVALID_IE                 13
+#define WLAN_MGMT_REASON_MIC_FAILURE                14
+#define WLAN_MGMT_REASON_4WAY_HANDSHAKE_TIMEOUT     15
+#define WLAN_MGMT_REASON_GRPKEY_UPDATE_TIMEOUT      16
+#define WLAN_MGMT_REASON_4WAY_INFO_DIFFERENT        17
+#define WLAN_MGMT_REASON_MULTCAST_CIPHER_INVALID    18
+#define WLAN_MGMT_REASON_UNCAST_CIPHER_INVALID      19
+#define WLAN_MGMT_REASON_AKMP_INVALID               20
+#define WLAN_MGMT_REASON_RSNE_UNSUPPORTED           21
+#define WLAN_MGMT_REASON_RSNE_CAP_INVALID           22
+#define WLAN_MGMT_REASON_80211X_AUTH_FAILED         23
+
+// Status Codes
+#define WLAN_MGMT_STATUS_SUCCESS                        0
+#define WLAN_MGMT_STATUS_UNSPEC_FAILURE                 1
+#define WLAN_MGMT_STATUS_CAPS_UNSUPPORTED               10
+#define WLAN_MGMT_STATUS_REASSOC_NO_ASSOC               11
+#define WLAN_MGMT_STATUS_ASSOC_DENIED_UNSPEC            12
+#define WLAN_MGMT_STATUS_UNSUPPORTED_AUTHALG            13
+#define WLAN_MGMT_STATUS_RX_AUTH_NOSEQ                  14
+#define WLAN_MGMT_STATUS_CHALLENGE_FAIL                 15
+#define WLAN_MGMT_STATUS_AUTH_TIMEOUT                   16
+#define WLAN_MGMT_STATUS_ASSOC_DENIED_BUSY              17
+#define WLAN_MGMT_STATUS_ASSOC_DENIED_RATES             18
+#define WLAN_MGMT_STATUS_ASSOC_DENIED_SHORTPREAMBLE     19
+#define WLAN_MGMT_STATUS_ASSOC_DENIED_PBCC              20
+#define WLAN_MGMT_STATUS_ASSOC_DENIED_AGILITY           21
+
+// reference 802.11h 7.3.1.9
+//
+#define WLAN_MGMT_STATUS_ASSOC_REJECT_BCS_SPECTRUM_MNG  22
+#define WLAN_MGMT_STATUS_ASSOC_REJECT_BCS_PWR_CAP       23
+#define WLAN_MGMT_STATUS_ASSOC_REJECT_BCS_SUPP_CH       24
+//
+// reference 802.11g 7.3.1.9
+//
+#define WLAN_MGMT_STATUS_SHORTSLOTTIME_UNSUPPORTED      25
+#define WLAN_MGMT_STATUS_DSSSOFDM_UNSUPPORTED           26
+//
+// reference 802.11i 7.3.1.9 table 19
+//
+#define WLAN_MGMT_STATUS_INVALID_IE                     40
+#define WLAN_MGMT_STATUS_GROUP_CIPHER_INVALID           41
+#define WLAN_MGMT_STATUS_PAIRWISE_CIPHER_INVALID        42
+#define WLAN_MGMT_STATUS_AKMP_INVALID                   43
+#define WLAN_MGMT_STATUS_UNSUPPORT_RSN_IE_VER           44
+#define WLAN_MGMT_STATUS_INVALID_RSN_IE_CAP             45
+#define WLAN_MGMT_STATUS_CIPHER_REJECT                  46
+
+
+
+// Auth Algorithm
+#define WLAN_AUTH_ALG_OPENSYSTEM                0
+#define WLAN_AUTH_ALG_SHAREDKEY                 1
+
+
+
+// Management Frame Field Offsets
+// Note: Not all fields are listed because of variable lengths.
+// Note: These offsets are from the start of the frame data
+
+#define WLAN_BEACON_OFF_TS                  0
+#define WLAN_BEACON_OFF_BCN_INT             8
+#define WLAN_BEACON_OFF_CAPINFO             10
+#define WLAN_BEACON_OFF_SSID                12
+
+#define WLAN_DISASSOC_OFF_REASON            0
+
+#define WLAN_ASSOCREQ_OFF_CAP_INFO          0
+#define WLAN_ASSOCREQ_OFF_LISTEN_INT        2
+#define WLAN_ASSOCREQ_OFF_SSID              4
+
+#define WLAN_ASSOCRESP_OFF_CAP_INFO         0
+#define WLAN_ASSOCRESP_OFF_STATUS           2
+#define WLAN_ASSOCRESP_OFF_AID              4
+#define WLAN_ASSOCRESP_OFF_SUPP_RATES       6
+
+#define WLAN_REASSOCREQ_OFF_CAP_INFO        0
+#define WLAN_REASSOCREQ_OFF_LISTEN_INT      2
+#define WLAN_REASSOCREQ_OFF_CURR_AP         4
+#define WLAN_REASSOCREQ_OFF_SSID            10
+
+#define WLAN_REASSOCRESP_OFF_CAP_INFO       0
+#define WLAN_REASSOCRESP_OFF_STATUS         2
+#define WLAN_REASSOCRESP_OFF_AID            4
+#define WLAN_REASSOCRESP_OFF_SUPP_RATES     6
+
+#define WLAN_PROBEREQ_OFF_SSID              0
+
+#define WLAN_PROBERESP_OFF_TS               0
+#define WLAN_PROBERESP_OFF_BCN_INT          8
+#define WLAN_PROBERESP_OFF_CAP_INFO         10
+#define WLAN_PROBERESP_OFF_SSID             12
+
+#define WLAN_AUTHEN_OFF_AUTH_ALG            0
+#define WLAN_AUTHEN_OFF_AUTH_SEQ            2
+#define WLAN_AUTHEN_OFF_STATUS              4
+#define WLAN_AUTHEN_OFF_CHALLENGE           6
+
+#define WLAN_DEAUTHEN_OFF_REASON            0
+
+
+//
+// Cipher Suite Selectors defiened in 802.11i
+//
+#define WLAN_11i_CSS_USE_GROUP              0
+#define WLAN_11i_CSS_WEP40                  1
+#define WLAN_11i_CSS_TKIP                   2
+#define WLAN_11i_CSS_CCMP                   4
+#define WLAN_11i_CSS_WEP104                 5
+#define WLAN_11i_CSS_UNKNOWN                255
+
+//
+// Authentication and Key Management Suite Selectors defined in 802.11i
+//
+#define WLAN_11i_AKMSS_802_1X               1
+#define WLAN_11i_AKMSS_PSK                  2
+#define WLAN_11i_AKMSS_UNKNOWN              255
+
+// Measurement type definitions reference ieee 802.11h Table 20b
+#define MEASURE_TYPE_BASIC      0
+#define MEASURE_TYPE_CCA        1
+#define MEASURE_TYPE_RPI        2
+
+// Measurement request mode definitions reference ieee 802.11h Figure 46h
+#define MEASURE_MODE_ENABLE     0x02
+#define MEASURE_MODE_REQ        0x04
+#define MEASURE_MODE_REP        0x08
+
+// Measurement report mode definitions reference ieee 802.11h Figure 46m
+#define MEASURE_MODE_LATE       0x01
+#define MEASURE_MODE_INCAPABLE  0x02
+#define MEASURE_MODE_REFUSED    0x04
+
+
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Types  ------------------------------*/
+
+
+// Information Element Types
+
+#pragma pack(1)
+typedef struct tagWLAN_IE {
+    BYTE   byElementID;
+    BYTE   len;
+}__attribute__ ((__packed__))
+WLAN_IE, *PWLAN_IE;
+
+
+// Service Set Identity (SSID)
+#pragma pack(1)
+typedef struct tagWLAN_IE_SSID {
+    BYTE   byElementID;
+    BYTE   len;
+    BYTE   abySSID[1];
+}__attribute__ ((__packed__))
+WLAN_IE_SSID, *PWLAN_IE_SSID;
+
+
+// Supported Rates
+#pragma pack(1)
+typedef struct tagWLAN_IE_SUPP_RATES {
+    BYTE   byElementID;
+    BYTE   len;
+    BYTE   abyRates[1];
+}__attribute__ ((__packed__))
+WLAN_IE_SUPP_RATES,  *PWLAN_IE_SUPP_RATES;
+
+
+
+// FH Parameter Set
+#pragma pack(1)
+typedef struct _WLAN_IE_FH_PARMS {
+    BYTE    byElementID;
+    BYTE    len;
+    WORD    wDwellTime;
+    BYTE    byHopSet;
+    BYTE    byHopPattern;
+    BYTE    byHopIndex;
+} WLAN_IE_FH_PARMS,  *PWLAN_IE_FH_PARMS;
+
+
+// DS Parameter Set
+#pragma pack(1)
+typedef struct tagWLAN_IE_DS_PARMS {
+    BYTE   byElementID;
+    BYTE   len;
+    BYTE   byCurrChannel;
+}__attribute__ ((__packed__))
+WLAN_IE_DS_PARMS,  *PWLAN_IE_DS_PARMS;
+
+
+// CF Parameter Set
+#pragma pack(1)
+typedef struct tagWLAN_IE_CF_PARMS {
+    BYTE   byElementID;
+    BYTE   len;
+    BYTE   byCFPCount;
+    BYTE   byCFPPeriod;
+    WORD   wCFPMaxDuration;
+    WORD   wCFPDurRemaining;
+}__attribute__ ((__packed__))
+WLAN_IE_CF_PARMS,  *PWLAN_IE_CF_PARMS;
+
+
+// TIM
+#pragma pack(1)
+typedef struct tagWLAN_IE_TIM {
+    BYTE   byElementID;
+    BYTE   len;
+    BYTE   byDTIMCount;
+    BYTE   byDTIMPeriod;
+    BYTE   byBitMapCtl;
+    BYTE   byVirtBitMap[1];
+}__attribute__ ((__packed__))
+WLAN_IE_TIM,  *PWLAN_IE_TIM;
+
+
+// IBSS Parameter Set
+#pragma pack(1)
+typedef struct tagWLAN_IE_IBSS_PARMS {
+    BYTE   byElementID;
+    BYTE   len;
+    WORD   wATIMWindow;
+}__attribute__ ((__packed__))
+WLAN_IE_IBSS_PARMS, *PWLAN_IE_IBSS_PARMS;
+
+
+// Challenge Text
+#pragma pack(1)
+typedef struct tagWLAN_IE_CHALLENGE {
+    BYTE   byElementID;
+    BYTE   len;
+    BYTE   abyChallenge[1];
+}__attribute__ ((__packed__))
+WLAN_IE_CHALLENGE,  *PWLAN_IE_CHALLENGE;
+
+
+#pragma pack(1)
+typedef struct tagWLAN_IE_RSN_EXT {
+    BYTE byElementID;
+    BYTE len;
+    BYTE abyOUI[4];
+    WORD wVersion;
+    BYTE abyMulticast[4];
+    WORD wPKCount;
+    struct {
+        BYTE abyOUI[4];
+    } PKSList[1]; // the rest is variable so need to
+    // overlay ieauth structure
+} WLAN_IE_RSN_EXT, *PWLAN_IE_RSN_EXT;
+
+#pragma pack(1)
+typedef struct tagWLAN_IE_RSN_AUTH {
+    WORD wAuthCount;
+    struct {
+        BYTE abyOUI[4];
+    } AuthKSList[1];
+} WLAN_IE_RSN_AUTH, *PWLAN_IE_RSN_AUTH;
+
+// RSN Identity
+#pragma pack(1)
+typedef struct tagWLAN_IE_RSN {
+    BYTE   byElementID;
+    BYTE   len;
+    WORD   wVersion;
+    BYTE   abyRSN[WLAN_MIN_ARRAY];
+} WLAN_IE_RSN, *PWLAN_IE_RSN;
+
+
+// ERP
+#pragma pack(1)
+typedef struct tagWLAN_IE_ERP {
+    BYTE   byElementID;
+    BYTE   len;
+    BYTE   byContext;
+}__attribute__ ((__packed__))
+WLAN_IE_ERP,  *PWLAN_IE_ERP;
+
+
+#pragma pack(1)
+typedef struct _MEASEURE_REQ {
+    BYTE                byChannel;
+    BYTE                abyStartTime[8];
+    BYTE                abyDuration[2];
+} MEASEURE_REQ, *PMEASEURE_REQ,
+  MEASEURE_REQ_BASIC, *PMEASEURE_REQ_BASIC,
+  MEASEURE_REQ_CCA, *PMEASEURE_REQ_CCA,
+  MEASEURE_REQ_RPI, *PMEASEURE_REQ_RPI;
+
+typedef struct _MEASEURE_REP_BASIC {
+    BYTE                byChannel;
+    BYTE                abyStartTime[8];
+    BYTE                abyDuration[2];
+    BYTE                byMap;
+} MEASEURE_REP_BASIC, *PMEASEURE_REP_BASIC;
+
+typedef struct _MEASEURE_REP_CCA {
+    BYTE                byChannel;
+    BYTE                abyStartTime[8];
+    BYTE                abyDuration[2];
+    BYTE                byCCABusyFraction;
+} MEASEURE_REP_CCA, *PMEASEURE_REP_CCA;
+
+typedef struct _MEASEURE_REP_RPI {
+    BYTE                byChannel;
+    BYTE                abyStartTime[8];
+    BYTE                abyDuration[2];
+    BYTE                abyRPIdensity[8];
+} MEASEURE_REP_RPI, *PMEASEURE_REP_RPI;
+
+typedef union _MEASEURE_REP {
+
+    MEASEURE_REP_BASIC  sBasic;
+    MEASEURE_REP_CCA    sCCA;
+    MEASEURE_REP_RPI    sRPI;
+
+} MEASEURE_REP, *PMEASEURE_REP;
+
+typedef struct _WLAN_IE_MEASURE_REQ {
+    BYTE                byElementID;
+    BYTE                len;
+    BYTE                byToken;
+    BYTE                byMode;
+    BYTE                byType;
+    MEASEURE_REQ        sReq;
+} WLAN_IE_MEASURE_REQ, *PWLAN_IE_MEASURE_REQ;
+
+typedef struct _WLAN_IE_MEASURE_REP {
+    BYTE                byElementID;
+    BYTE                len;
+    BYTE                byToken;
+    BYTE                byMode;
+    BYTE                byType;
+    MEASEURE_REP        sRep;
+} WLAN_IE_MEASURE_REP, *PWLAN_IE_MEASURE_REP;
+
+typedef struct _WLAN_IE_CH_SW {
+    BYTE                byElementID;
+    BYTE                len;
+    BYTE                byMode;
+    BYTE                byChannel;
+    BYTE                byCount;
+} WLAN_IE_CH_SW, *PWLAN_IE_CH_SW;
+
+typedef struct _WLAN_IE_QUIET {
+    BYTE                byElementID;
+    BYTE                len;
+    BYTE                byQuietCount;
+    BYTE                byQuietPeriod;
+    BYTE                abyQuietDuration[2];
+    BYTE                abyQuietOffset[2];
+} WLAN_IE_QUIET, *PWLAN_IE_QUIET;
+
+typedef struct _WLAN_IE_COUNTRY {
+    BYTE                byElementID;
+    BYTE                len;
+    BYTE                abyCountryString[3];
+    BYTE                abyCountryInfo[3];
+} WLAN_IE_COUNTRY, *PWLAN_IE_COUNTRY;
+
+typedef struct _WLAN_IE_PW_CONST {
+    BYTE                byElementID;
+    BYTE                len;
+    BYTE                byPower;
+} WLAN_IE_PW_CONST, *PWLAN_IE_PW_CONST;
+
+typedef struct _WLAN_IE_PW_CAP {
+    BYTE                byElementID;
+    BYTE                len;
+    BYTE                byMinPower;
+    BYTE                byMaxPower;
+} WLAN_IE_PW_CAP, *PWLAN_IE_PW_CAP;
+
+typedef struct _WLAN_IE_SUPP_CH {
+    BYTE                byElementID;
+    BYTE                len;
+    BYTE                abyChannelTuple[2];
+} WLAN_IE_SUPP_CH, *PWLAN_IE_SUPP_CH;
+
+typedef struct _WLAN_IE_TPC_REQ {
+    BYTE                byElementID;
+    BYTE                len;
+} WLAN_IE_TPC_REQ, *PWLAN_IE_TPC_REQ;
+
+typedef struct _WLAN_IE_TPC_REP {
+    BYTE                byElementID;
+    BYTE                len;
+    BYTE                byTxPower;
+    BYTE                byLinkMargin;
+} WLAN_IE_TPC_REP, *PWLAN_IE_TPC_REP;
+
+
+typedef struct _WLAN_IE_IBSS_DFS {
+    BYTE                byElementID;
+    BYTE                len;
+    BYTE                abyDFSOwner[6];
+    BYTE                byDFSRecovery;
+    BYTE                abyChannelMap[2];
+} WLAN_IE_IBSS_DFS, *PWLAN_IE_IBSS_DFS;
+
+#pragma pack()
+
+
+
+// Frame Types
+// prototype structure, all mgmt frame types will start with these members
+typedef struct tagWLAN_FR_MGMT {
+
+    UINT                  uType;
+    UINT                  len;
+    PBYTE                 pBuf;
+    PUWLAN_80211HDR       pHdr;
+
+} WLAN_FR_MGMT,  *PWLAN_FR_MGMT;
+
+// Beacon frame
+typedef struct tagWLAN_FR_BEACON {
+
+    UINT                    uType;
+    UINT                    len;
+    PBYTE                   pBuf;
+    PUWLAN_80211HDR         pHdr;
+    // fixed fields
+    PQWORD                  pqwTimestamp;
+    PWORD                   pwBeaconInterval;
+    PWORD                   pwCapInfo;
+    /*-- info elements ----------*/
+    PWLAN_IE_SSID           pSSID;
+    PWLAN_IE_SUPP_RATES     pSuppRates;
+//  PWLAN_IE_FH_PARMS       pFHParms;
+    PWLAN_IE_DS_PARMS       pDSParms;
+    PWLAN_IE_CF_PARMS       pCFParms;
+    PWLAN_IE_TIM            pTIM;
+    PWLAN_IE_IBSS_PARMS     pIBSSParms;
+    PWLAN_IE_RSN            pRSN;
+    PWLAN_IE_RSN_EXT        pRSNWPA;
+    PWLAN_IE_ERP            pERP;
+    PWLAN_IE_SUPP_RATES     pExtSuppRates;
+    PWLAN_IE_COUNTRY        pIE_Country;
+    PWLAN_IE_PW_CONST       pIE_PowerConstraint;
+    PWLAN_IE_CH_SW          pIE_CHSW;
+    PWLAN_IE_IBSS_DFS       pIE_IBSSDFS;
+    PWLAN_IE_QUIET          pIE_Quiet;
+
+} WLAN_FR_BEACON, *PWLAN_FR_BEACON;
+
+
+// IBSS ATIM frame
+typedef struct tagWLAN_FR_IBSSATIM {
+
+    UINT                    uType;
+    UINT                    len;
+    PBYTE                   pBuf;
+    PUWLAN_80211HDR         pHdr;
+
+    // fixed fields
+    // info elements
+    // this frame type has a null body
+
+} WLAN_FR_IBSSATIM, *PWLAN_FR_IBSSATIM;
+
+// Disassociation
+typedef struct tagWLAN_FR_DISASSOC {
+
+    UINT                    uType;
+    UINT                    len;
+    PBYTE                   pBuf;
+    PUWLAN_80211HDR         pHdr;
+    /*-- fixed fields -----------*/
+    PWORD                   pwReason;
+    /*-- info elements ----------*/
+
+} WLAN_FR_DISASSOC, *PWLAN_FR_DISASSOC;
+
+// Association Request
+typedef struct tagWLAN_FR_ASSOCREQ {
+
+    UINT                    uType;
+    UINT                    len;
+    PBYTE                   pBuf;
+    PUWLAN_80211HDR         pHdr;
+    /*-- fixed fields -----------*/
+    PWORD                   pwCapInfo;
+    PWORD                   pwListenInterval;
+    /*-- info elements ----------*/
+    PWLAN_IE_SSID           pSSID;
+    PWLAN_IE_SUPP_RATES     pSuppRates;
+    PWLAN_IE_RSN            pRSN;
+    PWLAN_IE_RSN_EXT        pRSNWPA;
+    PWLAN_IE_SUPP_RATES     pExtSuppRates;
+    PWLAN_IE_PW_CAP         pCurrPowerCap;
+    PWLAN_IE_SUPP_CH        pCurrSuppCh;
+
+} WLAN_FR_ASSOCREQ, *PWLAN_FR_ASSOCREQ;
+
+// Association Response
+typedef struct tagWLAN_FR_ASSOCRESP {
+
+    UINT                    uType;
+    UINT                    len;
+    PBYTE                   pBuf;
+    PUWLAN_80211HDR         pHdr;
+    /*-- fixed fields -----------*/
+    PWORD                   pwCapInfo;
+    PWORD                   pwStatus;
+    PWORD                   pwAid;
+    /*-- info elements ----------*/
+    PWLAN_IE_SUPP_RATES     pSuppRates;
+    PWLAN_IE_SUPP_RATES     pExtSuppRates;
+
+} WLAN_FR_ASSOCRESP, *PWLAN_FR_ASSOCRESP;
+
+// Reassociation Request
+typedef struct tagWLAN_FR_REASSOCREQ {
+
+    UINT                    uType;
+    UINT                    len;
+    PBYTE                   pBuf;
+    PUWLAN_80211HDR         pHdr;
+
+    /*-- fixed fields -----------*/
+    PWORD                   pwCapInfo;
+    PWORD                   pwListenInterval;
+    PIEEE_ADDR              pAddrCurrAP;
+
+    /*-- info elements ----------*/
+    PWLAN_IE_SSID           pSSID;
+    PWLAN_IE_SUPP_RATES     pSuppRates;
+    PWLAN_IE_RSN            pRSN;
+    PWLAN_IE_RSN_EXT        pRSNWPA;
+    PWLAN_IE_SUPP_RATES     pExtSuppRates;
+
+} WLAN_FR_REASSOCREQ, *PWLAN_FR_REASSOCREQ;
+
+// Reassociation Response
+typedef struct tagWLAN_FR_REASSOCRESP {
+
+    UINT                    uType;
+    UINT                    len;
+    PBYTE                   pBuf;
+    PUWLAN_80211HDR         pHdr;
+    /*-- fixed fields -----------*/
+    PWORD                   pwCapInfo;
+    PWORD                   pwStatus;
+    PWORD                   pwAid;
+    /*-- info elements ----------*/
+    PWLAN_IE_SUPP_RATES     pSuppRates;
+    PWLAN_IE_SUPP_RATES     pExtSuppRates;
+
+} WLAN_FR_REASSOCRESP, *PWLAN_FR_REASSOCRESP;
+
+// Probe Request
+typedef struct tagWLAN_FR_PROBEREQ {
+
+    UINT                    uType;
+    UINT                    len;
+    PBYTE                   pBuf;
+    PUWLAN_80211HDR         pHdr;
+    /*-- fixed fields -----------*/
+    /*-- info elements ----------*/
+    PWLAN_IE_SSID           pSSID;
+    PWLAN_IE_SUPP_RATES     pSuppRates;
+    PWLAN_IE_SUPP_RATES     pExtSuppRates;
+
+} WLAN_FR_PROBEREQ, *PWLAN_FR_PROBEREQ;
+
+// Probe Response
+typedef struct tagWLAN_FR_PROBERESP {
+
+    UINT                    uType;
+    UINT                    len;
+    PBYTE                   pBuf;
+    PUWLAN_80211HDR         pHdr;
+    /*-- fixed fields -----------*/
+    PQWORD                  pqwTimestamp;
+    PWORD                   pwBeaconInterval;
+    PWORD                   pwCapInfo;
+    /*-- info elements ----------*/
+    PWLAN_IE_SSID           pSSID;
+    PWLAN_IE_SUPP_RATES     pSuppRates;
+    PWLAN_IE_DS_PARMS       pDSParms;
+    PWLAN_IE_CF_PARMS       pCFParms;
+    PWLAN_IE_IBSS_PARMS     pIBSSParms;
+    PWLAN_IE_RSN            pRSN;
+    PWLAN_IE_RSN_EXT        pRSNWPA;
+    PWLAN_IE_ERP            pERP;
+    PWLAN_IE_SUPP_RATES     pExtSuppRates;
+    PWLAN_IE_COUNTRY        pIE_Country;
+    PWLAN_IE_PW_CONST       pIE_PowerConstraint;
+    PWLAN_IE_CH_SW          pIE_CHSW;
+    PWLAN_IE_IBSS_DFS       pIE_IBSSDFS;
+    PWLAN_IE_QUIET          pIE_Quiet;
+
+} WLAN_FR_PROBERESP, *PWLAN_FR_PROBERESP;
+
+// Authentication
+typedef struct tagWLAN_FR_AUTHEN {
+
+    UINT                    uType;
+    UINT                    len;
+    PBYTE                   pBuf;
+    PUWLAN_80211HDR         pHdr;
+    /*-- fixed fields -----------*/
+    PWORD                   pwAuthAlgorithm;
+    PWORD                   pwAuthSequence;
+    PWORD                   pwStatus;
+    /*-- info elements ----------*/
+    PWLAN_IE_CHALLENGE      pChallenge;
+
+} WLAN_FR_AUTHEN, *PWLAN_FR_AUTHEN;
+
+// Deauthenication
+typedef struct tagWLAN_FR_DEAUTHEN {
+
+    UINT                    uType;
+    UINT                    len;
+    PBYTE                   pBuf;
+    PUWLAN_80211HDR         pHdr;
+    /*-- fixed fields -----------*/
+    PWORD                   pwReason;
+
+    /*-- info elements ----------*/
+
+} WLAN_FR_DEAUTHEN, *PWLAN_FR_DEAUTHEN;
+
+/*---------------------  Export Functions  --------------------------*/
+VOID
+vMgrEncodeBeacon(
+    IN  PWLAN_FR_BEACON  pFrame
+     );
+
+VOID
+vMgrDecodeBeacon(
+    IN  PWLAN_FR_BEACON  pFrame
+    );
+
+VOID
+vMgrEncodeIBSSATIM(
+    IN  PWLAN_FR_IBSSATIM   pFrame
+    );
+
+VOID
+vMgrDecodeIBSSATIM(
+    IN  PWLAN_FR_IBSSATIM   pFrame
+    );
+
+VOID
+vMgrEncodeDisassociation(
+    IN  PWLAN_FR_DISASSOC  pFrame
+    );
+
+VOID
+vMgrDecodeDisassociation(
+    IN  PWLAN_FR_DISASSOC  pFrame
+    );
+
+VOID
+vMgrEncodeAssocRequest(
+    IN  PWLAN_FR_ASSOCREQ  pFrame
+    );
+
+VOID
+vMgrDecodeAssocRequest(
+    IN  PWLAN_FR_ASSOCREQ  pFrame
+    );
+
+VOID
+vMgrEncodeAssocResponse(
+    IN  PWLAN_FR_ASSOCRESP  pFrame
+    );
+
+VOID
+vMgrDecodeAssocResponse(
+    IN PWLAN_FR_ASSOCRESP  pFrame
+    );
+
+VOID
+vMgrEncodeReassocRequest(
+    IN  PWLAN_FR_REASSOCREQ  pFrame
+    );
+
+VOID
+vMgrDecodeReassocRequest(
+    IN  PWLAN_FR_REASSOCREQ  pFrame
+    );
+
+VOID
+vMgrEncodeProbeRequest(
+    IN PWLAN_FR_PROBEREQ  pFrame
+    );
+
+VOID
+vMgrDecodeProbeRequest(
+    IN PWLAN_FR_PROBEREQ  pFrame
+    );
+
+VOID
+vMgrEncodeProbeResponse(
+    IN PWLAN_FR_PROBERESP  pFrame
+    );
+
+VOID
+vMgrDecodeProbeResponse(
+    IN PWLAN_FR_PROBERESP  pFrame
+    );
+
+VOID
+vMgrEncodeAuthen(
+    IN  PWLAN_FR_AUTHEN  pFrame
+    );
+
+VOID
+vMgrDecodeAuthen(
+    IN  PWLAN_FR_AUTHEN  pFrame
+    );
+
+VOID
+vMgrEncodeDeauthen(
+    IN  PWLAN_FR_DEAUTHEN  pFrame
+    );
+
+VOID
+vMgrDecodeDeauthen(
+    IN  PWLAN_FR_DEAUTHEN  pFrame
+    );
+
+VOID
+vMgrEncodeReassocResponse(
+    IN  PWLAN_FR_REASSOCRESP  pFrame
+    );
+
+VOID
+vMgrDecodeReassocResponse(
+    IN  PWLAN_FR_REASSOCRESP  pFrame
+    );
+
+#endif// __80211MGR_H__
diff --git a/drivers/staging/vt6655/IEEE11h.c b/drivers/staging/vt6655/IEEE11h.c
new file mode 100644
index 00000000000..5f25b8e88bd
--- /dev/null
+++ b/drivers/staging/vt6655/IEEE11h.c
@@ -0,0 +1,324 @@
+/*
+ * Copyright (c) 1996, 2005 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: IEEE11h.c
+ *
+ * Purpose:
+ *
+ * Functions:
+ *
+ * Revision History:
+ *
+ * Author: Yiching Chen
+ *
+ * Date: Mar. 31, 2005
+ *
+ */
+
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+#if !defined(__UMEM_H__)
+#include "umem.h"
+#endif
+#if !defined(__TMACRO_H__)
+#include "tmacro.h"
+#endif
+#if !defined(__TETHER_H__)
+#include "tether.h"
+#endif
+#if !defined(__IEEE11h_H__)
+#include "IEEE11h.h"
+#endif
+
+#if !defined(__DEVICE_H__)
+#include "device.h"
+#endif
+#if !defined(__WMGR_H__)
+#include "wmgr.h"
+#endif
+#if !defined(__RXTX_H__)
+#include "rxtx.h"
+#endif
+
+
+
+/*---------------------  Static Definitions -------------------------*/
+static int          msglevel                =MSG_LEVEL_INFO;
+
+#pragma pack(1)
+
+typedef struct _WLAN_FRAME_ACTION {
+    WLAN_80211HDR_A3    Header;
+    BYTE                byCategory;
+    BYTE                byAction;
+    BYTE                abyVars[1];
+} WLAN_FRAME_ACTION, *PWLAN_FRAME_ACTION;
+
+typedef struct _WLAN_FRAME_MSRREQ {
+    WLAN_80211HDR_A3    Header;
+    BYTE                byCategory;
+    BYTE                byAction;
+    BYTE                byDialogToken;
+    WLAN_IE_MEASURE_REQ sMSRReqEIDs[1];
+} WLAN_FRAME_MSRREQ, *PWLAN_FRAME_MSRREQ;
+
+typedef struct _WLAN_FRAME_MSRREP {
+    WLAN_80211HDR_A3    Header;
+    BYTE                byCategory;
+    BYTE                byAction;
+    BYTE                byDialogToken;
+    WLAN_IE_MEASURE_REP sMSRRepEIDs[1];
+} WLAN_FRAME_MSRREP, *PWLAN_FRAME_MSRREP;
+
+typedef struct _WLAN_FRAME_TPCREQ {
+    WLAN_80211HDR_A3    Header;
+    BYTE                byCategory;
+    BYTE                byAction;
+    BYTE                byDialogToken;
+    WLAN_IE_TPC_REQ     sTPCReqEIDs;
+} WLAN_FRAME_TPCREQ, *PWLAN_FRAME_TPCREQ;
+
+typedef struct _WLAN_FRAME_TPCREP {
+    WLAN_80211HDR_A3    Header;
+    BYTE                byCategory;
+    BYTE                byAction;
+    BYTE                byDialogToken;
+    WLAN_IE_TPC_REP     sTPCRepEIDs;
+} WLAN_FRAME_TPCREP, *PWLAN_FRAME_TPCREP;
+
+#pragma pack()
+
+// action field reference ieee 802.11h Table 20e
+#define ACTION_MSRREQ       0
+#define ACTION_MSRREP       1
+#define ACTION_TPCREQ       2
+#define ACTION_TPCREP       3
+#define ACTION_CHSW         4
+
+/*---------------------  Static Classes  ----------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+
+/*---------------------  Static Functions  --------------------------*/
+static BOOL s_bRxMSRReq(PSMgmtObject pMgmt, PWLAN_FRAME_MSRREQ pMSRReq, UINT uLength)
+{
+    UINT    uNumOfEIDs = 0;
+    BOOL    bResult = TRUE;
+
+    if (uLength <= WLAN_A3FR_MAXLEN) {
+        MEMvCopy(pMgmt->abyCurrentMSRReq, pMSRReq, uLength);
+    }
+    uNumOfEIDs = ((uLength - OFFSET(WLAN_FRAME_MSRREQ, sMSRReqEIDs))/ (sizeof(WLAN_IE_MEASURE_REQ)));
+    pMgmt->pCurrMeasureEIDRep = &(((PWLAN_FRAME_MSRREP) (pMgmt->abyCurrentMSRRep))->sMSRRepEIDs[0]);
+    pMgmt->uLengthOfRepEIDs = 0;
+    bResult = CARDbStartMeasure(pMgmt->pAdapter,
+                                ((PWLAN_FRAME_MSRREQ) (pMgmt->abyCurrentMSRReq))->sMSRReqEIDs,
+                                uNumOfEIDs
+                                );
+    return (bResult);
+}
+
+
+static BOOL s_bRxTPCReq(PSMgmtObject pMgmt, PWLAN_FRAME_TPCREQ pTPCReq, BYTE byRate, BYTE byRSSI)
+{
+    PWLAN_FRAME_TPCREP  pFrame;
+    PSTxMgmtPacket      pTxPacket = NULL;
+
+
+    pTxPacket = (PSTxMgmtPacket)pMgmt->pbyMgmtPacketPool;
+    memset(pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_A3FR_MAXLEN);
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+
+    pFrame = (PWLAN_FRAME_TPCREP)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+
+    pFrame->Header.wFrameCtl = (   WLAN_SET_FC_FTYPE(WLAN_FTYPE_MGMT) |
+                                    WLAN_SET_FC_FSTYPE(WLAN_FSTYPE_ACTION)
+                                );
+
+    MEMvCopy( pFrame->Header.abyAddr1, pTPCReq->Header.abyAddr2, WLAN_ADDR_LEN);
+    MEMvCopy( pFrame->Header.abyAddr2, CARDpGetCurrentAddress(pMgmt->pAdapter), WLAN_ADDR_LEN);
+    MEMvCopy( pFrame->Header.abyAddr3, pMgmt->abyCurrBSSID, WLAN_BSSID_LEN);
+
+    pFrame->byCategory = 0;
+    pFrame->byAction = 3;
+    pFrame->byDialogToken = ((PWLAN_FRAME_MSRREQ) (pMgmt->abyCurrentMSRReq))->byDialogToken;
+
+    pFrame->sTPCRepEIDs.byElementID = WLAN_EID_TPC_REP;
+    pFrame->sTPCRepEIDs.len = 2;
+    pFrame->sTPCRepEIDs.byTxPower = CARDbyGetTransmitPower(pMgmt->pAdapter);
+    switch (byRate) {
+        case RATE_54M:
+            pFrame->sTPCRepEIDs.byLinkMargin = 65 - byRSSI;
+            break;
+        case RATE_48M:
+            pFrame->sTPCRepEIDs.byLinkMargin = 66 - byRSSI;
+            break;
+        case RATE_36M:
+            pFrame->sTPCRepEIDs.byLinkMargin = 70 - byRSSI;
+            break;
+        case RATE_24M:
+            pFrame->sTPCRepEIDs.byLinkMargin = 74 - byRSSI;
+            break;
+        case RATE_18M:
+            pFrame->sTPCRepEIDs.byLinkMargin = 77 - byRSSI;
+            break;
+        case RATE_12M:
+            pFrame->sTPCRepEIDs.byLinkMargin = 79 - byRSSI;
+            break;
+        case RATE_9M:
+            pFrame->sTPCRepEIDs.byLinkMargin = 81 - byRSSI;
+            break;
+        case RATE_6M:
+        default:
+            pFrame->sTPCRepEIDs.byLinkMargin = 82 - byRSSI;
+            break;
+    }
+
+    pTxPacket->cbMPDULen = sizeof(WLAN_FRAME_TPCREP);
+    pTxPacket->cbPayloadLen = sizeof(WLAN_FRAME_TPCREP) - WLAN_HDR_ADDR3_LEN;
+    if (csMgmt_xmit(pMgmt->pAdapter, pTxPacket) != CMD_STATUS_PENDING)
+        return (FALSE);
+    return (TRUE);
+//    return (CARDbSendPacket(pMgmt->pAdapter, pFrame, PKT_TYPE_802_11_MNG, sizeof(WLAN_FRAME_TPCREP)));
+
+}
+
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+
+
+/*+
+ *
+ * Description:
+ *      Handles action management frames.
+ *
+ * Parameters:
+ *  In:
+ *      pMgmt           - Management Object structure
+ *      pRxPacket       - Received packet
+ *  Out:
+ *      none
+ *
+ * Return Value: None.
+ *
+-*/
+BOOL
+IEEE11hbMgrRxAction (
+    IN PVOID pMgmtHandle,
+    IN PVOID pRxPacket
+    )
+{
+    PSMgmtObject            pMgmt = (PSMgmtObject) pMgmtHandle;
+    PWLAN_FRAME_ACTION      pAction = NULL;
+    UINT                    uLength = 0;
+    PWLAN_IE_CH_SW          pChannelSwitch = NULL;
+
+
+    // decode the frame
+    uLength = ((PSRxMgmtPacket)pRxPacket)->cbMPDULen;
+    if (uLength > WLAN_A3FR_MAXLEN) {
+        return (FALSE);
+    }
+
+
+    pAction = (PWLAN_FRAME_ACTION) (((PSRxMgmtPacket)pRxPacket)->p80211Header);
+
+    if (pAction->byCategory == 0) {
+        switch (pAction->byAction) {
+            case ACTION_MSRREQ:
+                return (s_bRxMSRReq(pMgmt, (PWLAN_FRAME_MSRREQ) pAction, uLength));
+                break;
+            case ACTION_MSRREP:
+                break;
+            case ACTION_TPCREQ:
+                return (s_bRxTPCReq(pMgmt,
+                                    (PWLAN_FRAME_TPCREQ) pAction,
+                                    ((PSRxMgmtPacket)pRxPacket)->byRxRate,
+                                    (BYTE) ((PSRxMgmtPacket)pRxPacket)->uRSSI));
+                break;
+            case ACTION_TPCREP:
+                break;
+            case ACTION_CHSW:
+                pChannelSwitch = (PWLAN_IE_CH_SW) (pAction->abyVars);
+                if ((pChannelSwitch->byElementID == WLAN_EID_CH_SWITCH) &&
+                    (pChannelSwitch->len == 3)) {
+                    // valid element id
+                    CARDbChannelSwitch( pMgmt->pAdapter,
+                                        pChannelSwitch->byMode,
+                                        CARDbyGetChannelMapping(pMgmt->pAdapter, pChannelSwitch->byChannel, pMgmt->eCurrentPHYMode),
+                                        pChannelSwitch->byCount
+                                        );
+                }
+                break;
+            default:
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Unknown Action = %d\n", pAction->byAction);
+                break;
+        }
+    } else {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Unknown Category = %d\n", pAction->byCategory);
+        pAction->byCategory |= 0x80;
+
+       //return (CARDbSendPacket(pMgmt->pAdapter, pAction, PKT_TYPE_802_11_MNG, uLength));
+        return (TRUE);
+    }
+    return (TRUE);
+}
+
+
+BOOL IEEE11hbMSRRepTx (
+    IN PVOID pMgmtHandle
+    )
+{
+    PSMgmtObject            pMgmt = (PSMgmtObject) pMgmtHandle;
+    PWLAN_FRAME_MSRREP      pMSRRep = (PWLAN_FRAME_MSRREP) (pMgmt->abyCurrentMSRRep + sizeof(STxMgmtPacket));
+    UINT                    uLength = 0;
+    PSTxMgmtPacket          pTxPacket = NULL;
+
+    pTxPacket = (PSTxMgmtPacket)pMgmt->abyCurrentMSRRep;
+    memset(pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_A3FR_MAXLEN);
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+
+
+    pMSRRep->Header.wFrameCtl = (   WLAN_SET_FC_FTYPE(WLAN_FTYPE_MGMT) |
+                                    WLAN_SET_FC_FSTYPE(WLAN_FSTYPE_ACTION)
+                                );
+
+    MEMvCopy( pMSRRep->Header.abyAddr1, ((PWLAN_FRAME_MSRREQ) (pMgmt->abyCurrentMSRReq))->Header.abyAddr2, WLAN_ADDR_LEN);
+    MEMvCopy( pMSRRep->Header.abyAddr2, CARDpGetCurrentAddress(pMgmt->pAdapter), WLAN_ADDR_LEN);
+    MEMvCopy( pMSRRep->Header.abyAddr3, pMgmt->abyCurrBSSID, WLAN_BSSID_LEN);
+
+    pMSRRep->byCategory = 0;
+    pMSRRep->byAction = 1;
+    pMSRRep->byDialogToken = ((PWLAN_FRAME_MSRREQ) (pMgmt->abyCurrentMSRReq))->byDialogToken;
+
+    uLength = pMgmt->uLengthOfRepEIDs + OFFSET(WLAN_FRAME_MSRREP, sMSRRepEIDs);
+
+    pTxPacket->cbMPDULen = uLength;
+    pTxPacket->cbPayloadLen = uLength - WLAN_HDR_ADDR3_LEN;
+    if (csMgmt_xmit(pMgmt->pAdapter, pTxPacket) != CMD_STATUS_PENDING)
+        return (FALSE);
+    return (TRUE);
+//    return (CARDbSendPacket(pMgmt->pAdapter, pMSRRep, PKT_TYPE_802_11_MNG, uLength));
+
+}
+
diff --git a/drivers/staging/vt6655/IEEE11h.h b/drivers/staging/vt6655/IEEE11h.h
new file mode 100644
index 00000000000..22bcaf1f681
--- /dev/null
+++ b/drivers/staging/vt6655/IEEE11h.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright (c) 1996, 2005 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: IEEE11h.h
+ *
+ * Purpose: Defines the macros, types, and functions for dealing
+ *          with IEEE 802.11h.
+ *
+ * Author: Yiching Chen
+ *
+ * Date: Mar. 31, 2005
+ *
+ */
+
+#ifndef __IEEE11h_H__
+#define __IEEE11h_H__
+
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+#if !defined(__80211HDR_H__)
+#include "80211hdr.h"
+#endif
+#if !defined(__80211MGR_H__)
+#include "80211mgr.h"
+#endif
+
+
+/*---------------------  Export Definitions -------------------------*/
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Types  ------------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+#ifdef __cplusplus
+extern "C" {                            /* Assume C declarations for C++ */
+#endif /* __cplusplus */
+
+BOOL IEEE11hbMSRRepTx (
+    IN PVOID pMgmtHandle
+    );
+
+#ifdef __cplusplus
+}                                       /* End of extern "C" { */
+#endif /* __cplusplus */
+
+
+#endif // __IEEE11h_H__
diff --git a/drivers/staging/vt6655/Kconfig b/drivers/staging/vt6655/Kconfig
new file mode 100644
index 00000000000..a01b1e49fb3
--- /dev/null
+++ b/drivers/staging/vt6655/Kconfig
@@ -0,0 +1,6 @@
+config VT6655
+   tristate "VIA Technologies VT6655 support"
+   depends on PCI
+   ---help---
+   This is a vendor-written driver for VIA VT6655.
+
diff --git a/drivers/staging/vt6655/Makefile b/drivers/staging/vt6655/Makefile
new file mode 100644
index 00000000000..7d76e7ef3f8
--- /dev/null
+++ b/drivers/staging/vt6655/Makefile
@@ -0,0 +1,38 @@
+# TODO: all of these should be removed
+EXTRA_CFLAGS += -DLINUX -D__KERNEL__ -DMODULE  -DEXPORT_SYMTAB -D__NO_VERSION__
+EXTRA_CFLAGS += -DHOSTAP
+
+vt6655-y +=	device_main.o \
+	card.o \
+	mac.o \
+	baseband.o \
+	wctl.o \
+	80211mgr.o \
+	wcmd.o \
+	wmgr.o \
+	bssdb.o \
+	rxtx.o \
+	dpc.o \
+	power.o \
+	datarate.o \
+	srom.o \
+	mib.o \
+	rc4.o \
+	tether.o \
+	tcrc.o \
+	ioctl.o \
+	hostap.o \
+	wpa.o \
+	key.o \
+	tkip.o \
+	michael.o \
+	wroute.o \
+	rf.o \
+	iwctl.o \
+	wpactl.o \
+	wpa2.o \
+	aes_ccmp.o \
+	vntwifi.o \
+	IEEE11h.o
+
+obj-$(CONFIG_VT6655) +=	vt6655.o
diff --git a/drivers/staging/vt6655/Makefile.arm b/drivers/staging/vt6655/Makefile.arm
new file mode 100644
index 00000000000..2d2ccaded6a
--- /dev/null
+++ b/drivers/staging/vt6655/Makefile.arm
@@ -0,0 +1,181 @@
+#
+#
+# Build options:
+#   PRIV_OBJ   := 1 for object version
+#   BIG_ENDIAN := 1 for big-endian mode
+#
+#   arm-linux-tools chain are located at:
+#     /usr/local/bin/arm-linux-gcc
+#     /usr/local/bin/arm-linux-ld
+#
+
+IO_MAP := 0
+HOSTAP := 1
+PRIV_OBJ := 1
+BIG_ENDIAN := 1
+
+test_dir = $(shell [ -e $(dir)/include/linux ] && echo $(dir))
+KSP := $(foreach dir, $(KSP), $(test_dir))
+
+KSRC := $(firstword $(KSP))
+
+#ifeq (,$(KSRC))
+#  $(error Linux kernel source not found)
+#endif
+
+# check kernel version
+KVER := $(shell uname -r | cut -c1-3 | sed 's/2\.[56]/2\.6/')
+KERVER2=$(shell uname -r | cut -d. -f2)
+
+ifeq ($(KVER), 2.6)
+# 2.6 kernel
+TARGET = viawget.ko
+
+else
+TARGET = viawget.o
+
+endif
+
+INSTDIR	:= $(shell find /lib/modules/$(shell uname -r) -name $(TARGET) -printf "%h\n" | sort | head -1)
+ifeq (,$(INSTDIR))
+	ifeq (,$(KERVER2))
+		ifneq (,$(wildcard /lib/modules/$(shell uname -r)/kernel))
+			INSTDIR := /lib/modules/$(shell uname -r)/kernel/drivers/net
+		else
+			INSTDIR := /lib/modules/$(shell uname -r)/net
+		endif
+	else
+		ifneq ($(KERVER2),2)
+			INSTDIR := /lib/modules/$(shell uname -r)/kernel/drivers/net
+		else
+			INSTDIR := /lib/modules/$(shell uname -r)/net
+		endif
+	endif
+endif
+
+
+SRC = device_main.c card.c mac.c baseband.c wctl.c 80211mgr.c \
+      wcmd.c wmgr.c bssdb.c rxtx.c dpc.c power.c datarate.c srom.c \
+      mib.c rc4.c tether.c tcrc.c ioctl.c hostap.c wpa.c key.c tkip.c \
+      michael.c wroute.c rf.c iwctl.c wpactl.c wpa2.c aes_ccmp.c
+
+ifeq ($(IO_MAP), 1)
+  CFLAGS += -DIO_MAP
+endif
+
+ifeq ($(HOSTAP), 1)
+  CFLAGS += -DHOSTAP
+endif
+
+ifeq ($(PRIV_OBJ), 1)
+  CFLAGS += -DPRIVATE_OBJ
+endif
+
+ifeq ($(BIG_ENDIAN), 1)
+  CFLAGS += -D__BIG_ENDIAN
+  CFLAGS += -mbig-endian
+  LDOPTS += -EB
+else
+  CFLAGS += -mlittle-endian
+  LDOPTS += -EL
+endif
+
+CFLAGS += -I$(PWD) -I$(PWD)/../include -I$(PWD)/../solomon
+
+
+# build rule
+ifeq ($(KVER), 2.6)
+# 2.6 kernel
+
+ifndef KERNEL_CONF
+KERNEL_CONF=	$(KSRC)/.config
+endif
+
+include ${KERNEL_CONF}
+
+obj-m += viawget.o
+
+viawget-objs :=	device_main.o card.o mac.o baseband.o wctl.o 80211mgr.o \
+	wcmd.o wmgr.o bssdb.o rxtx.o dpc.o power.o datarate.o srom.o \
+	mib.o rc4.o tether.o tcrc.o ioctl.o hostap.o wpa.o key.o tkip.o \
+	michael.o wroute.o rf.o iwctl.o wpactl.o wpa2.o aes_ccmp.o
+
+.c.o:
+	$(CC) $(CFLAGS) -o $@ $<
+
+default:
+	make -C $(KSRC) SUBDIRS=$(shell pwd) modules
+
+else
+
+# 2.2/2.4 kernel
+OBJS :=	device_main.o card.o mac.o baseband.o wctl.o 80211mgr.o \
+	wcmd.o wmgr.o bssdb.o rxtx.o dpc.o power.o datarate.o srom.o \
+	mib.o rc4.o tether.o tcrc.o ioctl.o hostap.o wpa.o key.o tkip.o \
+	michael.o wroute.o rf.o iwctl.o wpactl.o wpa2.o
+
+
+CC := /usr/local/bin/arm-linux-gcc
+LD := /usr/local/bin/arm-linux-ld
+
+CFLAGS += -Wall -DLINUX -D__KERNEL__ -DMODULE  -DEXPORT_SYMTAB -D__NO_VERSION__ -O2 -pipe
+#CFLAGS += -Wstrict-prototypes -fomit-frame-pointer
+COPTS+= -march=armv4 -fno-strict-aliasing -fno-common
+#COPTS+= -mapcs-32 -mtune=xscale  -mshort-load-bytes -msoft-float -mfp=2
+#COPTS+= -mthumb  -mcpu=arm9 -ffunction-sections -fdata-sections
+
+
+.SILENT: $(TARGET) clean
+
+
+
+ifeq ($(PRIV_OBJ), 1)
+
+ifeq ($(BIG_ENDIAN), 1)
+  TARGET = arm_be_g.o
+else
+  TARGET = arm_le_g.o
+endif
+
+endif
+
+
+
+$(TARGET): $(filter-out $(TARGET), $(SRC:.c=.o))
+	$(LD) $(LDOPTS) -r $^ -o $@
+	echo
+	echo "***********************************"
+	echo "Build options:"
+	echo "   VERSION    $(KVER)"
+	echo -n "   SMP             "
+	if [ "$(SMP)" = "1" ]; \
+		then echo "Enabled"; else echo "Disabled"; fi
+
+
+endif # ifeq ($(KVER),2.6)
+
+
+ifeq ($(KVER), 2.6)
+install: default
+else
+install: clean $(TARGET)
+endif
+	mkdir -p $(MOD_ROOT)$(INSTDIR)
+	install -m 644 -o root $(TARGET) $(MOD_ROOT)$(INSTDIR)
+
+ifeq (,$(MOD_ROOT))
+	/sbin/depmod -a || true
+else
+	/sbin/depmod -b $(MOD_ROOT) -a || true
+endif
+
+
+uninstall:
+	rm -f $(INSTDIR)/$(TARGET)
+	/sbin/depmod -a
+
+clean:
+	rm -f $(TARGET) $(SRC:.c=.o) *~
+	rm -f .*.o.d .*.o.cmd .*.ko.cmd *.mod.c *.mod.o
+
+-include .depend.mak
diff --git a/drivers/staging/vt6655/Makefile.x86 b/drivers/staging/vt6655/Makefile.x86
new file mode 100644
index 00000000000..69082f09ba7
--- /dev/null
+++ b/drivers/staging/vt6655/Makefile.x86
@@ -0,0 +1,209 @@
+#
+# Build options:
+#   PRIV_OBJ := 1 for object version
+#
+
+IO_MAP := 0
+HOSTAP := 1
+PRIV_OBJ := 1
+
+KSP :=  /lib/modules/$(shell uname -r)/build \
+	/usr/src/linux-$(shell uname -r) \
+	/usr/src/linux-$(shell uname -r | sed 's/-.*//') \
+	/usr/src/kernel-headers-$(shell uname -r) \
+	/usr/src/kernel-source-$(shell uname -r) \
+	/usr/src/linux-$(shell uname -r | sed 's/\([0-9]*\.[0-9]*\)\..*/\1/') \
+	/usr/src/linux
+
+test_dir = $(shell [ -e $(dir)/include/linux ] && echo $(dir))
+KSP := $(foreach dir, $(KSP), $(test_dir))
+
+KSRC := $(firstword $(KSP))
+
+ifeq (,$(KSRC))
+  $(error Linux kernel source not found)
+endif
+
+# check kernel version
+KVER := $(shell uname -r | cut -c1-3 | sed 's/2\.[56]/2\.6/')
+KERVER2=$(shell uname -r | cut -d. -f2)
+
+ifeq ($(KVER), 2.6)
+# 2.6 kernel
+TARGET = viawget.ko
+
+else
+TARGET = viawget.o
+
+endif
+
+INSTDIR	:= $(shell find /lib/modules/$(shell uname -r) -name $(TARGET) -printf "%h\n" | sort | head -1)
+ifeq (,$(INSTDIR))
+	ifeq (,$(KERVER2))
+		ifneq (,$(wildcard /lib/modules/$(shell uname -r)/kernel))
+			INSTDIR := /lib/modules/$(shell uname -r)/kernel/drivers/net
+		else
+			INSTDIR := /lib/modules/$(shell uname -r)/net
+		endif
+	else
+		ifneq ($(KERVER2),2)
+			INSTDIR := /lib/modules/$(shell uname -r)/kernel/drivers/net
+		else
+			INSTDIR := /lib/modules/$(shell uname -r)/net
+		endif
+	endif
+endif
+
+
+SRC = device_main.c card.c mac.c baseband.c wctl.c 80211mgr.c \
+      wcmd.c wmgr.c bssdb.c  wpa2.c rxtx.c dpc.c power.c datarate.c \
+      srom.c mib.c rc4.c tether.c tcrc.c ioctl.c hostap.c wpa.c key.c \
+      tkip.c michael.c wroute.c rf.c iwctl.c wpactl.c aes_ccmp.c
+
+ifeq ($(IO_MAP), 1)
+  CFLAGS += -DIO_MAP
+endif
+
+ifeq ($(HOSTAP), 1)
+  CFLAGS += -DHOSTAP
+endif
+
+ifeq ($(PRIV_OBJ), 1)
+  CFLAGS += -DPRIVATE_OBJ
+endif
+
+CFLAGS += -I$(PWD) -I$(PWD)/../include -I$(PWD)/../solomon
+
+
+# build rule
+ifeq ($(KVER), 2.6)
+# 2.6 kernel
+
+ifndef KERNEL_CONF
+KERNEL_CONF=	$(KSRC)/.config
+endif
+
+include ${KERNEL_CONF}
+
+obj-m += viawget.o
+
+viawget-objs :=	device_main.o card.o mac.o baseband.o wctl.o 80211mgr.o \
+	wcmd.o wmgr.o bssdb.o rxtx.o dpc.o power.o datarate.o srom.o \
+	mib.o rc4.o tether.o tcrc.o ioctl.o hostap.o wpa.o key.o tkip.o \
+	michael.o wroute.o rf.o iwctl.o wpactl.o wpa2.o aes_ccmp.o
+
+.c.o:
+	$(CC) $(CFLAGS) -o $@ $<
+
+default:
+	make -C $(KSRC) SUBDIRS=$(shell pwd) modules
+
+else
+
+# 2.2/2.4 kernel
+OBJS :=	device_main.o card.o mac.o baseband.o wctl.o 80211mgr.o \
+	wcmd.o wmgr.o bssdb.o rxtx.o dpc.o power.o datarate.o srom.o \
+	mib.o rc4.o tether.o tcrc.o ioctl.o hostap.o wpa.o key.o tkip.o \
+	michael.o wroute.o rf.o iwctl.o wpactl.o wpa2.o aes_ccmp.o
+
+VERSION_FILE := $(KSRC)/include/linux/version.h
+CONFIG_FILE  := $(KSRC)/include/linux/config.h
+
+
+ifeq (,$(wildcard $(VERSION_FILE)))
+  $(error Linux kernel source not configured - missing version.h)
+endif
+
+ifeq (,$(wildcard $(CONFIG_FILE)))
+  $(error Linux kernel source not configured - missing config.h)
+endif
+
+ifneq (,$(findstring egcs-2.91.66, $(shell cat /proc/version)))
+  CC := kgcc gcc cc
+else
+  CC := gcc cc
+endif
+
+test_cc = $(shell which $(cc) > /dev/null 2>&1 && echo $(cc))
+CC := $(foreach cc, $(CC), $(test_cc))
+CC := $(firstword $(CC))
+
+CFLAGS += -Wall -DLINUX -D__KERNEL__ -DMODULE  -DEXPORT_SYMTAB -D__NO_VERSION__ -O2 -pipe
+CFLAGS += -I$(KSRC)/include -Wstrict-prototypes -fomit-frame-pointer
+CFLAGS += $(shell [ -f $(KSRC)/include/linux/modversions.h ] && \
+            echo "-DMODVERSIONS -include $(KSRC)/include/linux/modversions.h")
+
+.SILENT: $(TARGET) clean
+
+
+# look for SMP in config.h
+SMP := $(shell $(CC) $(CFLAGS) -E -dM $(CONFIG_FILE) | \
+         grep CONFIG_SMP | awk '{ print $$3 }')
+
+ifneq ($(SMP),1)
+  SMP := 0
+endif
+
+
+ifeq ($(SMP), 1)
+  CFLAGS += -D__SMP__
+endif
+
+
+ifeq ($(PRIV_OBJ), 1)
+  CFLAGS += -DPRIVATE_OBJ
+  TARGET = x86g_up.o
+
+ifeq ($(SMP), 1)
+  TARGET = x86g_smp.o
+endif
+
+endif
+
+
+# check x86_64
+SUBARCH := $(shell uname -m)
+ifeq ($(SUBARCH),x86_64)
+    CFLAGS += -mcmodel=kernel -mno-red-zone
+endif
+
+
+$(TARGET): $(filter-out $(TARGET), $(SRC:.c=.o))
+	$(LD) -r $^ -o $@
+	echo; echo
+	echo "**************************************************"
+	echo "Build options:"
+	echo "   VERSION    $(KVER)"
+	echo -n "   SMP             "
+	if [ "$(SMP)" = "1" ]; \
+		then echo "Enabled"; else echo "Disabled"; fi
+
+
+
+endif # ifeq ($(KVER),2.6)
+
+
+ifeq ($(KVER), 2.6)
+install: default
+else
+install: clean $(TARGET)
+endif
+	mkdir -p $(MOD_ROOT)$(INSTDIR)
+	install -m 644 -o root $(TARGET) $(MOD_ROOT)$(INSTDIR)
+
+ifeq (,$(MOD_ROOT))
+	/sbin/depmod -a || true
+else
+	/sbin/depmod -b $(MOD_ROOT) -a || true
+endif
+
+
+uninstall:
+	rm -f $(INSTDIR)/$(TARGET)
+	/sbin/depmod -a
+
+clean:
+	rm -f $(TARGET) $(SRC:.c=.o) *~
+	rm -f .*.o.d .*.o.cmd .*.ko.cmd *.mod.c *.mod.o
+
+-include .depend.mak
diff --git a/drivers/staging/vt6655/aes_ccmp.c b/drivers/staging/vt6655/aes_ccmp.c
new file mode 100644
index 00000000000..59cc018d48a
--- /dev/null
+++ b/drivers/staging/vt6655/aes_ccmp.c
@@ -0,0 +1,410 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: aes_ccmp.c
+ *
+ * Purpose: AES_CCMP decryption
+ *
+ * Author: Warren Hsu
+ *
+ * Date: Feb 15, 2005
+ *
+ * Functions:
+ *      AESbGenCCMP - Parsing RX-packet
+ *
+ *
+ * Revision History:
+ *
+ */
+
+#if !defined(__UMEM_H__)
+#include "umem.h"
+#endif
+#if !defined(__DEVICE_H__)
+#include "device.h"
+#endif
+#if !defined(__80211HDR_H__)
+#include "80211hdr.h"
+#endif
+
+
+/*---------------------  Static Definitions -------------------------*/
+
+/*---------------------  Static Classes  ----------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+
+/*
+ * SBOX Table
+ */
+
+BYTE sbox_table[256] =
+{
+0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5, 0x30, 0x01, 0x67, 0x2b, 0xfe, 0xd7, 0xab, 0x76,
+0xca, 0x82, 0xc9, 0x7d, 0xfa, 0x59, 0x47, 0xf0, 0xad, 0xd4, 0xa2, 0xaf, 0x9c, 0xa4, 0x72, 0xc0,
+0xb7, 0xfd, 0x93, 0x26, 0x36, 0x3f, 0xf7, 0xcc, 0x34, 0xa5, 0xe5, 0xf1, 0x71, 0xd8, 0x31, 0x15,
+0x04, 0xc7, 0x23, 0xc3, 0x18, 0x96, 0x05, 0x9a, 0x07, 0x12, 0x80, 0xe2, 0xeb, 0x27, 0xb2, 0x75,
+0x09, 0x83, 0x2c, 0x1a, 0x1b, 0x6e, 0x5a, 0xa0, 0x52, 0x3b, 0xd6, 0xb3, 0x29, 0xe3, 0x2f, 0x84,
+0x53, 0xd1, 0x00, 0xed, 0x20, 0xfc, 0xb1, 0x5b, 0x6a, 0xcb, 0xbe, 0x39, 0x4a, 0x4c, 0x58, 0xcf,
+0xd0, 0xef, 0xaa, 0xfb, 0x43, 0x4d, 0x33, 0x85, 0x45, 0xf9, 0x02, 0x7f, 0x50, 0x3c, 0x9f, 0xa8,
+0x51, 0xa3, 0x40, 0x8f, 0x92, 0x9d, 0x38, 0xf5, 0xbc, 0xb6, 0xda, 0x21, 0x10, 0xff, 0xf3, 0xd2,
+0xcd, 0x0c, 0x13, 0xec, 0x5f, 0x97, 0x44, 0x17, 0xc4, 0xa7, 0x7e, 0x3d, 0x64, 0x5d, 0x19, 0x73,
+0x60, 0x81, 0x4f, 0xdc, 0x22, 0x2a, 0x90, 0x88, 0x46, 0xee, 0xb8, 0x14, 0xde, 0x5e, 0x0b, 0xdb,
+0xe0, 0x32, 0x3a, 0x0a, 0x49, 0x06, 0x24, 0x5c, 0xc2, 0xd3, 0xac, 0x62, 0x91, 0x95, 0xe4, 0x79,
+0xe7, 0xc8, 0x37, 0x6d, 0x8d, 0xd5, 0x4e, 0xa9, 0x6c, 0x56, 0xf4, 0xea, 0x65, 0x7a, 0xae, 0x08,
+0xba, 0x78, 0x25, 0x2e, 0x1c, 0xa6, 0xb4, 0xc6, 0xe8, 0xdd, 0x74, 0x1f, 0x4b, 0xbd, 0x8b, 0x8a,
+0x70, 0x3e, 0xb5, 0x66, 0x48, 0x03, 0xf6, 0x0e, 0x61, 0x35, 0x57, 0xb9, 0x86, 0xc1, 0x1d, 0x9e,
+0xe1, 0xf8, 0x98, 0x11, 0x69, 0xd9, 0x8e, 0x94, 0x9b, 0x1e, 0x87, 0xe9, 0xce, 0x55, 0x28, 0xdf,
+0x8c, 0xa1, 0x89, 0x0d, 0xbf, 0xe6, 0x42, 0x68, 0x41, 0x99, 0x2d, 0x0f, 0xb0, 0x54, 0xbb, 0x16
+};
+
+BYTE dot2_table[256] = {
+0x00, 0x02, 0x04, 0x06, 0x08, 0x0a, 0x0c, 0x0e, 0x10, 0x12, 0x14, 0x16, 0x18, 0x1a, 0x1c, 0x1e,
+0x20, 0x22, 0x24, 0x26, 0x28, 0x2a, 0x2c, 0x2e, 0x30, 0x32, 0x34, 0x36, 0x38, 0x3a, 0x3c, 0x3e,
+0x40, 0x42, 0x44, 0x46, 0x48, 0x4a, 0x4c, 0x4e, 0x50, 0x52, 0x54, 0x56, 0x58, 0x5a, 0x5c, 0x5e,
+0x60, 0x62, 0x64, 0x66, 0x68, 0x6a, 0x6c, 0x6e, 0x70, 0x72, 0x74, 0x76, 0x78, 0x7a, 0x7c, 0x7e,
+0x80, 0x82, 0x84, 0x86, 0x88, 0x8a, 0x8c, 0x8e, 0x90, 0x92, 0x94, 0x96, 0x98, 0x9a, 0x9c, 0x9e,
+0xa0, 0xa2, 0xa4, 0xa6, 0xa8, 0xaa, 0xac, 0xae, 0xb0, 0xb2, 0xb4, 0xb6, 0xb8, 0xba, 0xbc, 0xbe,
+0xc0, 0xc2, 0xc4, 0xc6, 0xc8, 0xca, 0xcc, 0xce, 0xd0, 0xd2, 0xd4, 0xd6, 0xd8, 0xda, 0xdc, 0xde,
+0xe0, 0xe2, 0xe4, 0xe6, 0xe8, 0xea, 0xec, 0xee, 0xf0, 0xf2, 0xf4, 0xf6, 0xf8, 0xfa, 0xfc, 0xfe,
+0x1b, 0x19, 0x1f, 0x1d, 0x13, 0x11, 0x17, 0x15, 0x0b, 0x09, 0x0f, 0x0d, 0x03, 0x01, 0x07, 0x05,
+0x3b, 0x39, 0x3f, 0x3d, 0x33, 0x31, 0x37, 0x35, 0x2b, 0x29, 0x2f, 0x2d, 0x23, 0x21, 0x27, 0x25,
+0x5b, 0x59, 0x5f, 0x5d, 0x53, 0x51, 0x57, 0x55, 0x4b, 0x49, 0x4f, 0x4d, 0x43, 0x41, 0x47, 0x45,
+0x7b, 0x79, 0x7f, 0x7d, 0x73, 0x71, 0x77, 0x75, 0x6b, 0x69, 0x6f, 0x6d, 0x63, 0x61, 0x67, 0x65,
+0x9b, 0x99, 0x9f, 0x9d, 0x93, 0x91, 0x97, 0x95, 0x8b, 0x89, 0x8f, 0x8d, 0x83, 0x81, 0x87, 0x85,
+0xbb, 0xb9, 0xbf, 0xbd, 0xb3, 0xb1, 0xb7, 0xb5, 0xab, 0xa9, 0xaf, 0xad, 0xa3, 0xa1, 0xa7, 0xa5,
+0xdb, 0xd9, 0xdf, 0xdd, 0xd3, 0xd1, 0xd7, 0xd5, 0xcb, 0xc9, 0xcf, 0xcd, 0xc3, 0xc1, 0xc7, 0xc5,
+0xfb, 0xf9, 0xff, 0xfd, 0xf3, 0xf1, 0xf7, 0xf5, 0xeb, 0xe9, 0xef, 0xed, 0xe3, 0xe1, 0xe7, 0xe5
+};
+
+BYTE dot3_table[256] = {
+0x00, 0x03, 0x06, 0x05, 0x0c, 0x0f, 0x0a, 0x09, 0x18, 0x1b, 0x1e, 0x1d, 0x14, 0x17, 0x12, 0x11,
+0x30, 0x33, 0x36, 0x35, 0x3c, 0x3f, 0x3a, 0x39, 0x28, 0x2b, 0x2e, 0x2d, 0x24, 0x27, 0x22, 0x21,
+0x60, 0x63, 0x66, 0x65, 0x6c, 0x6f, 0x6a, 0x69, 0x78, 0x7b, 0x7e, 0x7d, 0x74, 0x77, 0x72, 0x71,
+0x50, 0x53, 0x56, 0x55, 0x5c, 0x5f, 0x5a, 0x59, 0x48, 0x4b, 0x4e, 0x4d, 0x44, 0x47, 0x42, 0x41,
+0xc0, 0xc3, 0xc6, 0xc5, 0xcc, 0xcf, 0xca, 0xc9, 0xd8, 0xdb, 0xde, 0xdd, 0xd4, 0xd7, 0xd2, 0xd1,
+0xf0, 0xf3, 0xf6, 0xf5, 0xfc, 0xff, 0xfa, 0xf9, 0xe8, 0xeb, 0xee, 0xed, 0xe4, 0xe7, 0xe2, 0xe1,
+0xa0, 0xa3, 0xa6, 0xa5, 0xac, 0xaf, 0xaa, 0xa9, 0xb8, 0xbb, 0xbe, 0xbd, 0xb4, 0xb7, 0xb2, 0xb1,
+0x90, 0x93, 0x96, 0x95, 0x9c, 0x9f, 0x9a, 0x99, 0x88, 0x8b, 0x8e, 0x8d, 0x84, 0x87, 0x82, 0x81,
+0x9b, 0x98, 0x9d, 0x9e, 0x97, 0x94, 0x91, 0x92, 0x83, 0x80, 0x85, 0x86, 0x8f, 0x8c, 0x89, 0x8a,
+0xab, 0xa8, 0xad, 0xae, 0xa7, 0xa4, 0xa1, 0xa2, 0xb3, 0xb0, 0xb5, 0xb6, 0xbf, 0xbc, 0xb9, 0xba,
+0xfb, 0xf8, 0xfd, 0xfe, 0xf7, 0xf4, 0xf1, 0xf2, 0xe3, 0xe0, 0xe5, 0xe6, 0xef, 0xec, 0xe9, 0xea,
+0xcb, 0xc8, 0xcd, 0xce, 0xc7, 0xc4, 0xc1, 0xc2, 0xd3, 0xd0, 0xd5, 0xd6, 0xdf, 0xdc, 0xd9, 0xda,
+0x5b, 0x58, 0x5d, 0x5e, 0x57, 0x54, 0x51, 0x52, 0x43, 0x40, 0x45, 0x46, 0x4f, 0x4c, 0x49, 0x4a,
+0x6b, 0x68, 0x6d, 0x6e, 0x67, 0x64, 0x61, 0x62, 0x73, 0x70, 0x75, 0x76, 0x7f, 0x7c, 0x79, 0x7a,
+0x3b, 0x38, 0x3d, 0x3e, 0x37, 0x34, 0x31, 0x32, 0x23, 0x20, 0x25, 0x26, 0x2f, 0x2c, 0x29, 0x2a,
+0x0b, 0x08, 0x0d, 0x0e, 0x07, 0x04, 0x01, 0x02, 0x13, 0x10, 0x15, 0x16, 0x1f, 0x1c, 0x19, 0x1a
+};
+
+/*---------------------  Static Functions  --------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+
+void xor_128(BYTE *a, BYTE *b, BYTE *out)
+{
+PDWORD dwPtrA = (PDWORD) a;
+PDWORD dwPtrB = (PDWORD) b;
+PDWORD dwPtrOut =(PDWORD) out;
+
+    (*dwPtrOut++) = (*dwPtrA++) ^ (*dwPtrB++);
+    (*dwPtrOut++) = (*dwPtrA++) ^ (*dwPtrB++);
+    (*dwPtrOut++) = (*dwPtrA++) ^ (*dwPtrB++);
+    (*dwPtrOut++) = (*dwPtrA++) ^ (*dwPtrB++);
+}
+
+
+void xor_32(BYTE *a, BYTE *b, BYTE *out)
+{
+PDWORD dwPtrA = (PDWORD) a;
+PDWORD dwPtrB = (PDWORD) b;
+PDWORD dwPtrOut =(PDWORD) out;
+
+    (*dwPtrOut++) = (*dwPtrA++) ^ (*dwPtrB++);
+}
+
+void AddRoundKey(BYTE *key, int round)
+{
+BYTE sbox_key[4];
+BYTE rcon_table[10] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x1b, 0x36};
+
+    sbox_key[0] = sbox_table[key[13]];
+    sbox_key[1] = sbox_table[key[14]];
+    sbox_key[2] = sbox_table[key[15]];
+    sbox_key[3] = sbox_table[key[12]];
+
+    key[0] = key[0] ^ rcon_table[round];
+    xor_32(&key[0], sbox_key, &key[0]);
+
+    xor_32(&key[4], &key[0], &key[4]);
+    xor_32(&key[8], &key[4], &key[8]);
+    xor_32(&key[12], &key[8], &key[12]);
+}
+
+void SubBytes(BYTE *in, BYTE *out)
+{
+int i;
+
+    for (i=0; i< 16; i++)
+    {
+        out[i] = sbox_table[in[i]];
+    }
+}
+
+void ShiftRows(BYTE *in, BYTE *out)
+{
+    out[0]  = in[0];
+    out[1]  = in[5];
+    out[2]  = in[10];
+    out[3]  = in[15];
+    out[4]  = in[4];
+    out[5]  = in[9];
+    out[6]  = in[14];
+    out[7]  = in[3];
+    out[8]  = in[8];
+    out[9]  = in[13];
+    out[10] = in[2];
+    out[11] = in[7];
+    out[12] = in[12];
+    out[13] = in[1];
+    out[14] = in[6];
+    out[15] = in[11];
+}
+
+void MixColumns(BYTE *in, BYTE *out)
+{
+
+    out[0] = dot2_table[in[0]] ^ dot3_table[in[1]] ^ in[2] ^ in[3];
+    out[1] = in[0] ^ dot2_table[in[1]] ^ dot3_table[in[2]] ^ in[3];
+    out[2] = in[0] ^ in[1] ^ dot2_table[in[2]] ^ dot3_table[in[3]];
+    out[3] = dot3_table[in[0]] ^ in[1] ^ in[2] ^ dot2_table[in[3]];
+}
+
+
+void AESv128(BYTE *key, BYTE *data, BYTE *ciphertext)
+{
+int  i;
+int  round;
+BYTE TmpdataA[16];
+BYTE TmpdataB[16];
+BYTE abyRoundKey[16];
+
+    for(i=0; i<16; i++)
+        abyRoundKey[i] = key[i];
+
+    for (round = 0; round < 11; round++)
+    {
+        if (round == 0)
+        {
+            xor_128(abyRoundKey, data, ciphertext);
+            AddRoundKey(abyRoundKey, round);
+        }
+        else if (round == 10)
+        {
+            SubBytes(ciphertext, TmpdataA);
+            ShiftRows(TmpdataA, TmpdataB);
+            xor_128(TmpdataB, abyRoundKey, ciphertext);
+        }
+        else // round 1 ~ 9
+        {
+            SubBytes(ciphertext, TmpdataA);
+            ShiftRows(TmpdataA, TmpdataB);
+            MixColumns(&TmpdataB[0], &TmpdataA[0]);
+            MixColumns(&TmpdataB[4], &TmpdataA[4]);
+            MixColumns(&TmpdataB[8], &TmpdataA[8]);
+            MixColumns(&TmpdataB[12], &TmpdataA[12]);
+            xor_128(TmpdataA, abyRoundKey, ciphertext);
+            AddRoundKey(abyRoundKey, round);
+        }
+    }
+
+}
+
+/*
+ * Description: AES decryption
+ *
+ * Parameters:
+ *  In:
+ *      pbyRxKey            - The key used to decrypt
+ *      pbyFrame            - Starting address of packet header
+ *      wFrameSize          - Total packet size including CRC
+ *  Out:
+ *      none
+ *
+ * Return Value: MIC compare result
+ *
+ */
+BOOL AESbGenCCMP(PBYTE pbyRxKey, PBYTE pbyFrame, WORD wFrameSize)
+{
+BYTE            abyNonce[13];
+BYTE            MIC_IV[16];
+BYTE            MIC_HDR1[16];
+BYTE            MIC_HDR2[16];
+BYTE            abyMIC[16];
+BYTE            abyCTRPLD[16];
+BYTE            abyTmp[16];
+BYTE            abyPlainText[16];
+BYTE            abyLastCipher[16];
+
+PS802_11Header  pMACHeader = (PS802_11Header) pbyFrame;
+PBYTE           pbyIV;
+PBYTE           pbyPayload;
+WORD            wHLen = 22;
+WORD            wPayloadSize = wFrameSize - 8 - 8 - 4 - WLAN_HDR_ADDR3_LEN;//8 is IV, 8 is MIC, 4 is CRC
+BOOL            bA4 = FALSE;
+BYTE            byTmp;
+WORD            wCnt;
+int             ii,jj,kk;
+
+
+    pbyIV = pbyFrame + WLAN_HDR_ADDR3_LEN;
+    if ( WLAN_GET_FC_TODS(*(PWORD)pbyFrame) &&
+         WLAN_GET_FC_FROMDS(*(PWORD)pbyFrame) ) {
+         bA4 = TRUE;
+         pbyIV += 6;             // 6 is 802.11 address4
+         wHLen += 6;
+         wPayloadSize -= 6;
+    }
+    pbyPayload = pbyIV + 8; //IV-length
+
+    abyNonce[0]  = 0x00; //now is 0, if Qos here will be priority
+    MEMvCopy(&(abyNonce[1]), pMACHeader->abyAddr2, U_ETHER_ADDR_LEN);
+    abyNonce[7]  = pbyIV[7];
+    abyNonce[8]  = pbyIV[6];
+    abyNonce[9]  = pbyIV[5];
+    abyNonce[10] = pbyIV[4];
+    abyNonce[11] = pbyIV[1];
+    abyNonce[12] = pbyIV[0];
+
+    //MIC_IV
+    MIC_IV[0] = 0x59;
+    MEMvCopy(&(MIC_IV[1]), &(abyNonce[0]), 13);
+    MIC_IV[14] = (BYTE)(wPayloadSize >> 8);
+    MIC_IV[15] = (BYTE)(wPayloadSize & 0xff);
+
+    //MIC_HDR1
+    MIC_HDR1[0] = (BYTE)(wHLen >> 8);
+    MIC_HDR1[1] = (BYTE)(wHLen & 0xff);
+    byTmp = (BYTE)(pMACHeader->wFrameCtl & 0xff);
+    MIC_HDR1[2] = byTmp & 0x8f;
+    byTmp = (BYTE)(pMACHeader->wFrameCtl >> 8);
+    byTmp &= 0x87;
+    MIC_HDR1[3] = byTmp | 0x40;
+    MEMvCopy(&(MIC_HDR1[4]), pMACHeader->abyAddr1, U_ETHER_ADDR_LEN);
+    MEMvCopy(&(MIC_HDR1[10]), pMACHeader->abyAddr2, U_ETHER_ADDR_LEN);
+
+    //MIC_HDR2
+    MEMvCopy(&(MIC_HDR2[0]), pMACHeader->abyAddr3, U_ETHER_ADDR_LEN);
+    byTmp = (BYTE)(pMACHeader->wSeqCtl & 0xff);
+    MIC_HDR2[6] = byTmp & 0x0f;
+    MIC_HDR2[7] = 0;
+    if ( bA4 ) {
+        MEMvCopy(&(MIC_HDR2[8]), pMACHeader->abyAddr4, U_ETHER_ADDR_LEN);
+    } else {
+        MIC_HDR2[8]  = 0x00;
+        MIC_HDR2[9]  = 0x00;
+        MIC_HDR2[10] = 0x00;
+        MIC_HDR2[11] = 0x00;
+        MIC_HDR2[12] = 0x00;
+        MIC_HDR2[13] = 0x00;
+    }
+    MIC_HDR2[14] = 0x00;
+    MIC_HDR2[15] = 0x00;
+
+    //CCMP
+    AESv128(pbyRxKey,MIC_IV,abyMIC);
+    for ( kk=0; kk<16; kk++ ) {
+        abyTmp[kk] = MIC_HDR1[kk] ^ abyMIC[kk];
+    }
+    AESv128(pbyRxKey,abyTmp,abyMIC);
+    for ( kk=0; kk<16; kk++ ) {
+        abyTmp[kk] = MIC_HDR2[kk] ^ abyMIC[kk];
+    }
+    AESv128(pbyRxKey,abyTmp,abyMIC);
+
+    wCnt = 1;
+    abyCTRPLD[0] = 0x01;
+    MEMvCopy(&(abyCTRPLD[1]), &(abyNonce[0]), 13);
+
+    for(jj=wPayloadSize; jj>16; jj=jj-16) {
+
+        abyCTRPLD[14] = (BYTE) (wCnt >> 8);
+        abyCTRPLD[15] = (BYTE) (wCnt & 0xff);
+
+        AESv128(pbyRxKey,abyCTRPLD,abyTmp);
+
+        for ( kk=0; kk<16; kk++ ) {
+            abyPlainText[kk] = abyTmp[kk] ^ pbyPayload[kk];
+        }
+        for ( kk=0; kk<16; kk++ ) {
+            abyTmp[kk] = abyMIC[kk] ^ abyPlainText[kk];
+        }
+        AESv128(pbyRxKey,abyTmp,abyMIC);
+
+        MEMvCopy(pbyPayload, abyPlainText, 16);
+        wCnt++;
+        pbyPayload += 16;
+    } //for wPayloadSize
+
+    //last payload
+    MEMvCopy(&(abyLastCipher[0]), pbyPayload, jj);
+    for ( ii=jj; ii<16; ii++ ) {
+        abyLastCipher[ii] = 0x00;
+    }
+
+    abyCTRPLD[14] = (BYTE) (wCnt >> 8);
+    abyCTRPLD[15] = (BYTE) (wCnt & 0xff);
+
+    AESv128(pbyRxKey,abyCTRPLD,abyTmp);
+    for ( kk=0; kk<16; kk++ ) {
+        abyPlainText[kk] = abyTmp[kk] ^ abyLastCipher[kk];
+    }
+    MEMvCopy(pbyPayload, abyPlainText, jj);
+    pbyPayload += jj;
+
+    //for MIC calculation
+    for ( ii=jj; ii<16; ii++ ) {
+        abyPlainText[ii] = 0x00;
+    }
+    for ( kk=0; kk<16; kk++ ) {
+        abyTmp[kk] = abyMIC[kk] ^ abyPlainText[kk];
+    }
+    AESv128(pbyRxKey,abyTmp,abyMIC);
+
+    //=>above is the calculate MIC
+    //--------------------------------------------
+
+    wCnt = 0;
+    abyCTRPLD[14] = (BYTE) (wCnt >> 8);
+    abyCTRPLD[15] = (BYTE) (wCnt & 0xff);
+    AESv128(pbyRxKey,abyCTRPLD,abyTmp);
+    for ( kk=0; kk<8; kk++ ) {
+        abyTmp[kk] = abyTmp[kk] ^ pbyPayload[kk];
+    }
+    //=>above is the dec-MIC from packet
+    //--------------------------------------------
+
+    if ( MEMEqualMemory(abyMIC,abyTmp,8) ) {
+        return TRUE;
+    } else {
+        return FALSE;
+    }
+
+}
diff --git a/drivers/staging/vt6655/aes_ccmp.h b/drivers/staging/vt6655/aes_ccmp.h
new file mode 100644
index 00000000000..2b1920f2860
--- /dev/null
+++ b/drivers/staging/vt6655/aes_ccmp.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: aes_ccmp.h
+ *
+ * Purpose: AES_CCMP Decryption
+ *
+ * Author: Warren Hsu
+ *
+ * Date: Feb 15, 2005
+ *
+ */
+
+#ifndef __AES_H__
+#define __AES_H__
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+
+/*---------------------  Export Definitions -------------------------*/
+
+/*---------------------  Export Types  ------------------------------*/
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+BOOL AESbGenCCMP(PBYTE pbyRxKey, PBYTE pbyFrame, WORD wFrameSize);
+
+#endif //__AES_H__
diff --git a/drivers/staging/vt6655/baseband.c b/drivers/staging/vt6655/baseband.c
new file mode 100644
index 00000000000..bc6db869953
--- /dev/null
+++ b/drivers/staging/vt6655/baseband.c
@@ -0,0 +1,2990 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: baseband.c
+ *
+ * Purpose: Implement functions to access baseband
+ *
+ * Author: Kyle Hsu
+ *
+ * Date: Aug.22, 2002
+ *
+ * Functions:
+ *      BBuGetFrameTime        - Calculate data frame transmitting time
+ *      BBvCaculateParameter   - Caculate PhyLength, PhyService and Phy Signal parameter for baseband Tx
+ *      BBbReadEmbeded         - Embeded read baseband register via MAC
+ *      BBbWriteEmbeded        - Embeded write baseband register via MAC
+ *      BBbIsRegBitsOn         - Test if baseband register bits on
+ *      BBbIsRegBitsOff        - Test if baseband register bits off
+ *      BBbVT3253Init          - VIA VT3253 baseband chip init code
+ *      BBvReadAllRegs         - Read All Baseband Registers
+ *      BBvLoopbackOn          - Turn on BaseBand Loopback mode
+ *      BBvLoopbackOff         - Turn off BaseBand Loopback mode
+ *
+ * Revision History:
+ *      06-10-2003 Bryan YC Fan:  Re-write codes to support VT3253 spec.
+ *      08-07-2003 Bryan YC Fan:  Add MAXIM2827/2825 and RFMD2959 support.
+ *      08-26-2003 Kyle Hsu    :  Modify BBuGetFrameTime() and BBvCaculateParameter().
+ *                                cancel the setting of MAC_REG_SOFTPWRCTL on BBbVT3253Init().
+ *                                Add the comments.
+ *      09-01-2003 Bryan YC Fan:  RF & BB tables updated.
+ *                                Modified BBvLoopbackOn & BBvLoopbackOff().
+ */
+
+#if !defined(__TMACRO_H__)
+#include "tmacro.h"
+#endif
+#if !defined(__TBIT_H__)
+#include "tbit.h"
+#endif
+#if !defined(__TETHER_H__)
+#include "tether.h"
+#endif
+#if !defined(__MAC_H__)
+#include "mac.h"
+#endif
+#if !defined(__BASEBAND_H__)
+#include "baseband.h"
+#endif
+#if !defined(__SROM_H__)
+#include "srom.h"
+#endif
+#if !defined(__UMEM_H__)
+#include "umem.h"
+#endif
+#if !defined(__RF_H__)
+#include "rf.h"
+#endif
+
+/*---------------------  Static Definitions -------------------------*/
+//static int          msglevel                =MSG_LEVEL_DEBUG;
+static int          msglevel                =MSG_LEVEL_INFO;
+
+//#define	PLICE_DEBUG
+
+/*---------------------  Static Classes  ----------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+/*---------------------  Static Functions  --------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Static Definitions -------------------------*/
+
+/*---------------------  Static Classes  ----------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+
+
+
+#define CB_VT3253_INIT_FOR_RFMD 446
+BYTE byVT3253InitTab_RFMD[CB_VT3253_INIT_FOR_RFMD][2] = {
+    {0x00, 0x30},
+    {0x01, 0x00},
+    {0x02, 0x00},
+    {0x03, 0x00},
+    {0x04, 0x00},
+    {0x05, 0x00},
+    {0x06, 0x00},
+    {0x07, 0x00},
+    {0x08, 0x70},
+    {0x09, 0x45},
+    {0x0a, 0x2a},
+    {0x0b, 0x76},
+    {0x0c, 0x00},
+    {0x0d, 0x01},
+    {0x0e, 0x80},
+    {0x0f, 0x00},
+    {0x10, 0x00},
+    {0x11, 0x00},
+    {0x12, 0x00},
+    {0x13, 0x00},
+    {0x14, 0x00},
+    {0x15, 0x00},
+    {0x16, 0x00},
+    {0x17, 0x00},
+    {0x18, 0x00},
+    {0x19, 0x00},
+    {0x1a, 0x00},
+    {0x1b, 0x9d},
+    {0x1c, 0x05},
+    {0x1d, 0x00},
+    {0x1e, 0x00},
+    {0x1f, 0x00},
+    {0x20, 0x00},
+    {0x21, 0x00},
+    {0x22, 0x00},
+    {0x23, 0x00},
+    {0x24, 0x00},
+    {0x25, 0x4a},
+    {0x26, 0x00},
+    {0x27, 0x00},
+    {0x28, 0x00},
+    {0x29, 0x00},
+    {0x2a, 0x00},
+    {0x2b, 0x00},
+    {0x2c, 0x00},
+    {0x2d, 0xa8},
+    {0x2e, 0x1a},
+    {0x2f, 0x0c},
+    {0x30, 0x26},
+    {0x31, 0x5b},
+    {0x32, 0x00},
+    {0x33, 0x00},
+    {0x34, 0x00},
+    {0x35, 0x00},
+    {0x36, 0xaa},
+    {0x37, 0xaa},
+    {0x38, 0xff},
+    {0x39, 0xff},
+    {0x3a, 0x00},
+    {0x3b, 0x00},
+    {0x3c, 0x00},
+    {0x3d, 0x0d},
+    {0x3e, 0x51},
+    {0x3f, 0x04},
+    {0x40, 0x00},
+    {0x41, 0x08},
+    {0x42, 0x00},
+    {0x43, 0x08},
+    {0x44, 0x06},
+    {0x45, 0x14},
+    {0x46, 0x05},
+    {0x47, 0x08},
+    {0x48, 0x00},
+    {0x49, 0x00},
+    {0x4a, 0x00},
+    {0x4b, 0x00},
+    {0x4c, 0x09},
+    {0x4d, 0x80},
+    {0x4e, 0x00},
+    {0x4f, 0xc5},
+    {0x50, 0x14},
+    {0x51, 0x19},
+    {0x52, 0x00},
+    {0x53, 0x00},
+    {0x54, 0x00},
+    {0x55, 0x00},
+    {0x56, 0x00},
+    {0x57, 0x00},
+    {0x58, 0x00},
+    {0x59, 0xb0},
+    {0x5a, 0x00},
+    {0x5b, 0x00},
+    {0x5c, 0x00},
+    {0x5d, 0x00},
+    {0x5e, 0x00},
+    {0x5f, 0x00},
+    {0x60, 0x44},
+    {0x61, 0x04},
+    {0x62, 0x00},
+    {0x63, 0x00},
+    {0x64, 0x00},
+    {0x65, 0x00},
+    {0x66, 0x04},
+    {0x67, 0xb7},
+    {0x68, 0x00},
+    {0x69, 0x00},
+    {0x6a, 0x00},
+    {0x6b, 0x00},
+    {0x6c, 0x00},
+    {0x6d, 0x03},
+    {0x6e, 0x01},
+    {0x6f, 0x00},
+    {0x70, 0x00},
+    {0x71, 0x00},
+    {0x72, 0x00},
+    {0x73, 0x00},
+    {0x74, 0x00},
+    {0x75, 0x00},
+    {0x76, 0x00},
+    {0x77, 0x00},
+    {0x78, 0x00},
+    {0x79, 0x00},
+    {0x7a, 0x00},
+    {0x7b, 0x00},
+    {0x7c, 0x00},
+    {0x7d, 0x00},
+    {0x7e, 0x00},
+    {0x7f, 0x00},
+    {0x80, 0x0b},
+    {0x81, 0x00},
+    {0x82, 0x3c},
+    {0x83, 0x00},
+    {0x84, 0x00},
+    {0x85, 0x00},
+    {0x86, 0x00},
+    {0x87, 0x00},
+    {0x88, 0x08},
+    {0x89, 0x00},
+    {0x8a, 0x08},
+    {0x8b, 0xa6},
+    {0x8c, 0x84},
+    {0x8d, 0x47},
+    {0x8e, 0xbb},
+    {0x8f, 0x02},
+    {0x90, 0x21},
+    {0x91, 0x0c},
+    {0x92, 0x04},
+    {0x93, 0x22},
+    {0x94, 0x00},
+    {0x95, 0x00},
+    {0x96, 0x00},
+    {0x97, 0xeb},
+    {0x98, 0x00},
+    {0x99, 0x00},
+    {0x9a, 0x00},
+    {0x9b, 0x00},
+    {0x9c, 0x00},
+    {0x9d, 0x00},
+    {0x9e, 0x00},
+    {0x9f, 0x00},
+    {0xa0, 0x00},
+    {0xa1, 0x00},
+    {0xa2, 0x00},
+    {0xa3, 0x00},
+    {0xa4, 0x00},
+    {0xa5, 0x00},
+    {0xa6, 0x10},
+    {0xa7, 0x04},
+    {0xa8, 0x10},
+    {0xa9, 0x00},
+    {0xaa, 0x8f},
+    {0xab, 0x00},
+    {0xac, 0x00},
+    {0xad, 0x00},
+    {0xae, 0x00},
+    {0xaf, 0x80},
+    {0xb0, 0x38},
+    {0xb1, 0x00},
+    {0xb2, 0x00},
+    {0xb3, 0x00},
+    {0xb4, 0xee},
+    {0xb5, 0xff},
+    {0xb6, 0x10},
+    {0xb7, 0x00},
+    {0xb8, 0x00},
+    {0xb9, 0x00},
+    {0xba, 0x00},
+    {0xbb, 0x03},
+    {0xbc, 0x00},
+    {0xbd, 0x00},
+    {0xbe, 0x00},
+    {0xbf, 0x00},
+    {0xc0, 0x10},
+    {0xc1, 0x10},
+    {0xc2, 0x18},
+    {0xc3, 0x20},
+    {0xc4, 0x10},
+    {0xc5, 0x00},
+    {0xc6, 0x22},
+    {0xc7, 0x14},
+    {0xc8, 0x0f},
+    {0xc9, 0x08},
+    {0xca, 0xa4},
+    {0xcb, 0xa7},
+    {0xcc, 0x3c},
+    {0xcd, 0x10},
+    {0xce, 0x20},
+    {0xcf, 0x00},
+    {0xd0, 0x00},
+    {0xd1, 0x10},
+    {0xd2, 0x00},
+    {0xd3, 0x00},
+    {0xd4, 0x10},
+    {0xd5, 0x33},
+    {0xd6, 0x70},
+    {0xd7, 0x01},
+    {0xd8, 0x00},
+    {0xd9, 0x00},
+    {0xda, 0x00},
+    {0xdb, 0x00},
+    {0xdc, 0x00},
+    {0xdd, 0x00},
+    {0xde, 0x00},
+    {0xdf, 0x00},
+    {0xe0, 0x00},
+    {0xe1, 0x00},
+    {0xe2, 0xcc},
+    {0xe3, 0x04},
+    {0xe4, 0x08},
+    {0xe5, 0x10},
+    {0xe6, 0x00},
+    {0xe7, 0x0e},
+    {0xe8, 0x88},
+    {0xe9, 0xd4},
+    {0xea, 0x05},
+    {0xeb, 0xf0},
+    {0xec, 0x79},
+    {0xed, 0x0f},
+    {0xee, 0x04},
+    {0xef, 0x04},
+    {0xf0, 0x00},
+    {0xf1, 0x00},
+    {0xf2, 0x00},
+    {0xf3, 0x00},
+    {0xf4, 0x00},
+    {0xf5, 0x00},
+    {0xf6, 0x00},
+    {0xf7, 0x00},
+    {0xf8, 0x00},
+    {0xf9, 0x00},
+    {0xF0, 0x00},
+    {0xF1, 0xF8},
+    {0xF0, 0x80},
+    {0xF0, 0x00},
+    {0xF1, 0xF4},
+    {0xF0, 0x81},
+    {0xF0, 0x01},
+    {0xF1, 0xF0},
+    {0xF0, 0x82},
+    {0xF0, 0x02},
+    {0xF1, 0xEC},
+    {0xF0, 0x83},
+    {0xF0, 0x03},
+    {0xF1, 0xE8},
+    {0xF0, 0x84},
+    {0xF0, 0x04},
+    {0xF1, 0xE4},
+    {0xF0, 0x85},
+    {0xF0, 0x05},
+    {0xF1, 0xE0},
+    {0xF0, 0x86},
+    {0xF0, 0x06},
+    {0xF1, 0xDC},
+    {0xF0, 0x87},
+    {0xF0, 0x07},
+    {0xF1, 0xD8},
+    {0xF0, 0x88},
+    {0xF0, 0x08},
+    {0xF1, 0xD4},
+    {0xF0, 0x89},
+    {0xF0, 0x09},
+    {0xF1, 0xD0},
+    {0xF0, 0x8A},
+    {0xF0, 0x0A},
+    {0xF1, 0xCC},
+    {0xF0, 0x8B},
+    {0xF0, 0x0B},
+    {0xF1, 0xC8},
+    {0xF0, 0x8C},
+    {0xF0, 0x0C},
+    {0xF1, 0xC4},
+    {0xF0, 0x8D},
+    {0xF0, 0x0D},
+    {0xF1, 0xC0},
+    {0xF0, 0x8E},
+    {0xF0, 0x0E},
+    {0xF1, 0xBC},
+    {0xF0, 0x8F},
+    {0xF0, 0x0F},
+    {0xF1, 0xB8},
+    {0xF0, 0x90},
+    {0xF0, 0x10},
+    {0xF1, 0xB4},
+    {0xF0, 0x91},
+    {0xF0, 0x11},
+    {0xF1, 0xB0},
+    {0xF0, 0x92},
+    {0xF0, 0x12},
+    {0xF1, 0xAC},
+    {0xF0, 0x93},
+    {0xF0, 0x13},
+    {0xF1, 0xA8},
+    {0xF0, 0x94},
+    {0xF0, 0x14},
+    {0xF1, 0xA4},
+    {0xF0, 0x95},
+    {0xF0, 0x15},
+    {0xF1, 0xA0},
+    {0xF0, 0x96},
+    {0xF0, 0x16},
+    {0xF1, 0x9C},
+    {0xF0, 0x97},
+    {0xF0, 0x17},
+    {0xF1, 0x98},
+    {0xF0, 0x98},
+    {0xF0, 0x18},
+    {0xF1, 0x94},
+    {0xF0, 0x99},
+    {0xF0, 0x19},
+    {0xF1, 0x90},
+    {0xF0, 0x9A},
+    {0xF0, 0x1A},
+    {0xF1, 0x8C},
+    {0xF0, 0x9B},
+    {0xF0, 0x1B},
+    {0xF1, 0x88},
+    {0xF0, 0x9C},
+    {0xF0, 0x1C},
+    {0xF1, 0x84},
+    {0xF0, 0x9D},
+    {0xF0, 0x1D},
+    {0xF1, 0x80},
+    {0xF0, 0x9E},
+    {0xF0, 0x1E},
+    {0xF1, 0x7C},
+    {0xF0, 0x9F},
+    {0xF0, 0x1F},
+    {0xF1, 0x78},
+    {0xF0, 0xA0},
+    {0xF0, 0x20},
+    {0xF1, 0x74},
+    {0xF0, 0xA1},
+    {0xF0, 0x21},
+    {0xF1, 0x70},
+    {0xF0, 0xA2},
+    {0xF0, 0x22},
+    {0xF1, 0x6C},
+    {0xF0, 0xA3},
+    {0xF0, 0x23},
+    {0xF1, 0x68},
+    {0xF0, 0xA4},
+    {0xF0, 0x24},
+    {0xF1, 0x64},
+    {0xF0, 0xA5},
+    {0xF0, 0x25},
+    {0xF1, 0x60},
+    {0xF0, 0xA6},
+    {0xF0, 0x26},
+    {0xF1, 0x5C},
+    {0xF0, 0xA7},
+    {0xF0, 0x27},
+    {0xF1, 0x58},
+    {0xF0, 0xA8},
+    {0xF0, 0x28},
+    {0xF1, 0x54},
+    {0xF0, 0xA9},
+    {0xF0, 0x29},
+    {0xF1, 0x50},
+    {0xF0, 0xAA},
+    {0xF0, 0x2A},
+    {0xF1, 0x4C},
+    {0xF0, 0xAB},
+    {0xF0, 0x2B},
+    {0xF1, 0x48},
+    {0xF0, 0xAC},
+    {0xF0, 0x2C},
+    {0xF1, 0x44},
+    {0xF0, 0xAD},
+    {0xF0, 0x2D},
+    {0xF1, 0x40},
+    {0xF0, 0xAE},
+    {0xF0, 0x2E},
+    {0xF1, 0x3C},
+    {0xF0, 0xAF},
+    {0xF0, 0x2F},
+    {0xF1, 0x38},
+    {0xF0, 0xB0},
+    {0xF0, 0x30},
+    {0xF1, 0x34},
+    {0xF0, 0xB1},
+    {0xF0, 0x31},
+    {0xF1, 0x30},
+    {0xF0, 0xB2},
+    {0xF0, 0x32},
+    {0xF1, 0x2C},
+    {0xF0, 0xB3},
+    {0xF0, 0x33},
+    {0xF1, 0x28},
+    {0xF0, 0xB4},
+    {0xF0, 0x34},
+    {0xF1, 0x24},
+    {0xF0, 0xB5},
+    {0xF0, 0x35},
+    {0xF1, 0x20},
+    {0xF0, 0xB6},
+    {0xF0, 0x36},
+    {0xF1, 0x1C},
+    {0xF0, 0xB7},
+    {0xF0, 0x37},
+    {0xF1, 0x18},
+    {0xF0, 0xB8},
+    {0xF0, 0x38},
+    {0xF1, 0x14},
+    {0xF0, 0xB9},
+    {0xF0, 0x39},
+    {0xF1, 0x10},
+    {0xF0, 0xBA},
+    {0xF0, 0x3A},
+    {0xF1, 0x0C},
+    {0xF0, 0xBB},
+    {0xF0, 0x3B},
+    {0xF1, 0x08},
+    {0xF0, 0x00},
+    {0xF0, 0x3C},
+    {0xF1, 0x04},
+    {0xF0, 0xBD},
+    {0xF0, 0x3D},
+    {0xF1, 0x00},
+    {0xF0, 0xBE},
+    {0xF0, 0x3E},
+    {0xF1, 0x00},
+    {0xF0, 0xBF},
+    {0xF0, 0x3F},
+    {0xF1, 0x00},
+    {0xF0, 0xC0},
+    {0xF0, 0x00},
+};
+
+#define CB_VT3253B0_INIT_FOR_RFMD 256
+BYTE byVT3253B0_RFMD[CB_VT3253B0_INIT_FOR_RFMD][2] = {
+    {0x00, 0x31},
+    {0x01, 0x00},
+    {0x02, 0x00},
+    {0x03, 0x00},
+    {0x04, 0x00},
+    {0x05, 0x81},
+    {0x06, 0x00},
+    {0x07, 0x00},
+    {0x08, 0x38},
+    {0x09, 0x45},
+    {0x0a, 0x2a},
+    {0x0b, 0x76},
+    {0x0c, 0x00},
+    {0x0d, 0x00},
+    {0x0e, 0x80},
+    {0x0f, 0x00},
+    {0x10, 0x00},
+    {0x11, 0x00},
+    {0x12, 0x00},
+    {0x13, 0x00},
+    {0x14, 0x00},
+    {0x15, 0x00},
+    {0x16, 0x00},
+    {0x17, 0x00},
+    {0x18, 0x00},
+    {0x19, 0x00},
+    {0x1a, 0x00},
+    {0x1b, 0x8e},
+    {0x1c, 0x06},
+    {0x1d, 0x00},
+    {0x1e, 0x00},
+    {0x1f, 0x00},
+    {0x20, 0x00},
+    {0x21, 0x00},
+    {0x22, 0x00},
+    {0x23, 0x00},
+    {0x24, 0x00},
+    {0x25, 0x4a},
+    {0x26, 0x00},
+    {0x27, 0x00},
+    {0x28, 0x00},
+    {0x29, 0x00},
+    {0x2a, 0x00},
+    {0x2b, 0x00},
+    {0x2c, 0x00},
+    {0x2d, 0x34},
+    {0x2e, 0x18},
+    {0x2f, 0x0c},
+    {0x30, 0x26},
+    {0x31, 0x5b},
+    {0x32, 0x00},
+    {0x33, 0x00},
+    {0x34, 0x00},
+    {0x35, 0x00},
+    {0x36, 0xaa},
+    {0x37, 0xaa},
+    {0x38, 0xff},
+    {0x39, 0xff},
+    {0x3a, 0xf8},
+    {0x3b, 0x00},
+    {0x3c, 0x00},
+    {0x3d, 0x09},
+    {0x3e, 0x0d},
+    {0x3f, 0x04},
+    {0x40, 0x00},
+    {0x41, 0x08},
+    {0x42, 0x00},
+    {0x43, 0x08},
+    {0x44, 0x08},
+    {0x45, 0x14},
+    {0x46, 0x05},
+    {0x47, 0x08},
+    {0x48, 0x00},
+    {0x49, 0x00},
+    {0x4a, 0x00},
+    {0x4b, 0x00},
+    {0x4c, 0x09},
+    {0x4d, 0x80},
+    {0x4e, 0x00},
+    {0x4f, 0xc5},
+    {0x50, 0x14},
+    {0x51, 0x19},
+    {0x52, 0x00},
+    {0x53, 0x00},
+    {0x54, 0x00},
+    {0x55, 0x00},
+    {0x56, 0x00},
+    {0x57, 0x00},
+    {0x58, 0x00},
+    {0x59, 0xb0},
+    {0x5a, 0x00},
+    {0x5b, 0x00},
+    {0x5c, 0x00},
+    {0x5d, 0x00},
+    {0x5e, 0x00},
+    {0x5f, 0x00},
+    {0x60, 0x39},
+    {0x61, 0x83},
+    {0x62, 0x00},
+    {0x63, 0x00},
+    {0x64, 0x00},
+    {0x65, 0x00},
+    {0x66, 0xc0},
+    {0x67, 0x49},
+    {0x68, 0x00},
+    {0x69, 0x00},
+    {0x6a, 0x00},
+    {0x6b, 0x00},
+    {0x6c, 0x00},
+    {0x6d, 0x03},
+    {0x6e, 0x01},
+    {0x6f, 0x00},
+    {0x70, 0x00},
+    {0x71, 0x00},
+    {0x72, 0x00},
+    {0x73, 0x00},
+    {0x74, 0x00},
+    {0x75, 0x00},
+    {0x76, 0x00},
+    {0x77, 0x00},
+    {0x78, 0x00},
+    {0x79, 0x00},
+    {0x7a, 0x00},
+    {0x7b, 0x00},
+    {0x7c, 0x00},
+    {0x7d, 0x00},
+    {0x7e, 0x00},
+    {0x7f, 0x00},
+    {0x80, 0x89},
+    {0x81, 0x00},
+    {0x82, 0x0e},
+    {0x83, 0x00},
+    {0x84, 0x00},
+    {0x85, 0x00},
+    {0x86, 0x00},
+    {0x87, 0x00},
+    {0x88, 0x08},
+    {0x89, 0x00},
+    {0x8a, 0x0e},
+    {0x8b, 0xa7},
+    {0x8c, 0x88},
+    {0x8d, 0x47},
+    {0x8e, 0xaa},
+    {0x8f, 0x02},
+    {0x90, 0x23},
+    {0x91, 0x0c},
+    {0x92, 0x06},
+    {0x93, 0x08},
+    {0x94, 0x00},
+    {0x95, 0x00},
+    {0x96, 0x00},
+    {0x97, 0xeb},
+    {0x98, 0x00},
+    {0x99, 0x00},
+    {0x9a, 0x00},
+    {0x9b, 0x00},
+    {0x9c, 0x00},
+    {0x9d, 0x00},
+    {0x9e, 0x00},
+    {0x9f, 0x00},
+    {0xa0, 0x00},
+    {0xa1, 0x00},
+    {0xa2, 0x00},
+    {0xa3, 0xcd},
+    {0xa4, 0x07},
+    {0xa5, 0x33},
+    {0xa6, 0x18},
+    {0xa7, 0x00},
+    {0xa8, 0x18},
+    {0xa9, 0x00},
+    {0xaa, 0x28},
+    {0xab, 0x00},
+    {0xac, 0x00},
+    {0xad, 0x00},
+    {0xae, 0x00},
+    {0xaf, 0x18},
+    {0xb0, 0x38},
+    {0xb1, 0x30},
+    {0xb2, 0x00},
+    {0xb3, 0x00},
+    {0xb4, 0x00},
+    {0xb5, 0x00},
+    {0xb6, 0x84},
+    {0xb7, 0xfd},
+    {0xb8, 0x00},
+    {0xb9, 0x00},
+    {0xba, 0x00},
+    {0xbb, 0x03},
+    {0xbc, 0x00},
+    {0xbd, 0x00},
+    {0xbe, 0x00},
+    {0xbf, 0x00},
+    {0xc0, 0x10},
+    {0xc1, 0x20},
+    {0xc2, 0x18},
+    {0xc3, 0x20},
+    {0xc4, 0x10},
+    {0xc5, 0x2c},
+    {0xc6, 0x1e},
+    {0xc7, 0x10},
+    {0xc8, 0x12},
+    {0xc9, 0x01},
+    {0xca, 0x6f},
+    {0xcb, 0xa7},
+    {0xcc, 0x3c},
+    {0xcd, 0x10},
+    {0xce, 0x00},
+    {0xcf, 0x22},
+    {0xd0, 0x00},
+    {0xd1, 0x10},
+    {0xd2, 0x00},
+    {0xd3, 0x00},
+    {0xd4, 0x10},
+    {0xd5, 0x33},
+    {0xd6, 0x80},
+    {0xd7, 0x21},
+    {0xd8, 0x00},
+    {0xd9, 0x00},
+    {0xda, 0x00},
+    {0xdb, 0x00},
+    {0xdc, 0x00},
+    {0xdd, 0x00},
+    {0xde, 0x00},
+    {0xdf, 0x00},
+    {0xe0, 0x00},
+    {0xe1, 0xB3},
+    {0xe2, 0x00},
+    {0xe3, 0x00},
+    {0xe4, 0x00},
+    {0xe5, 0x10},
+    {0xe6, 0x00},
+    {0xe7, 0x18},
+    {0xe8, 0x08},
+    {0xe9, 0xd4},
+    {0xea, 0x00},
+    {0xeb, 0xff},
+    {0xec, 0x79},
+    {0xed, 0x10},
+    {0xee, 0x30},
+    {0xef, 0x02},
+    {0xf0, 0x00},
+    {0xf1, 0x09},
+    {0xf2, 0x00},
+    {0xf3, 0x00},
+    {0xf4, 0x00},
+    {0xf5, 0x00},
+    {0xf6, 0x00},
+    {0xf7, 0x00},
+    {0xf8, 0x00},
+    {0xf9, 0x00},
+    {0xfa, 0x00},
+    {0xfb, 0x00},
+    {0xfc, 0x00},
+    {0xfd, 0x00},
+    {0xfe, 0x00},
+    {0xff, 0x00},
+};
+
+#define CB_VT3253B0_AGC_FOR_RFMD2959 195
+// For RFMD2959
+BYTE byVT3253B0_AGC4_RFMD2959[CB_VT3253B0_AGC_FOR_RFMD2959][2] = {
+    {0xF0, 0x00},
+    {0xF1, 0x3E},
+    {0xF0, 0x80},
+    {0xF0, 0x00},
+    {0xF1, 0x3E},
+    {0xF0, 0x81},
+    {0xF0, 0x01},
+    {0xF1, 0x3E},
+    {0xF0, 0x82},
+    {0xF0, 0x02},
+    {0xF1, 0x3E},
+    {0xF0, 0x83},
+    {0xF0, 0x03},
+    {0xF1, 0x3B},
+    {0xF0, 0x84},
+    {0xF0, 0x04},
+    {0xF1, 0x39},
+    {0xF0, 0x85},
+    {0xF0, 0x05},
+    {0xF1, 0x38},
+    {0xF0, 0x86},
+    {0xF0, 0x06},
+    {0xF1, 0x37},
+    {0xF0, 0x87},
+    {0xF0, 0x07},
+    {0xF1, 0x36},
+    {0xF0, 0x88},
+    {0xF0, 0x08},
+    {0xF1, 0x35},
+    {0xF0, 0x89},
+    {0xF0, 0x09},
+    {0xF1, 0x35},
+    {0xF0, 0x8A},
+    {0xF0, 0x0A},
+    {0xF1, 0x34},
+    {0xF0, 0x8B},
+    {0xF0, 0x0B},
+    {0xF1, 0x34},
+    {0xF0, 0x8C},
+    {0xF0, 0x0C},
+    {0xF1, 0x33},
+    {0xF0, 0x8D},
+    {0xF0, 0x0D},
+    {0xF1, 0x32},
+    {0xF0, 0x8E},
+    {0xF0, 0x0E},
+    {0xF1, 0x31},
+    {0xF0, 0x8F},
+    {0xF0, 0x0F},
+    {0xF1, 0x30},
+    {0xF0, 0x90},
+    {0xF0, 0x10},
+    {0xF1, 0x2F},
+    {0xF0, 0x91},
+    {0xF0, 0x11},
+    {0xF1, 0x2F},
+    {0xF0, 0x92},
+    {0xF0, 0x12},
+    {0xF1, 0x2E},
+    {0xF0, 0x93},
+    {0xF0, 0x13},
+    {0xF1, 0x2D},
+    {0xF0, 0x94},
+    {0xF0, 0x14},
+    {0xF1, 0x2C},
+    {0xF0, 0x95},
+    {0xF0, 0x15},
+    {0xF1, 0x2B},
+    {0xF0, 0x96},
+    {0xF0, 0x16},
+    {0xF1, 0x2B},
+    {0xF0, 0x97},
+    {0xF0, 0x17},
+    {0xF1, 0x2A},
+    {0xF0, 0x98},
+    {0xF0, 0x18},
+    {0xF1, 0x29},
+    {0xF0, 0x99},
+    {0xF0, 0x19},
+    {0xF1, 0x28},
+    {0xF0, 0x9A},
+    {0xF0, 0x1A},
+    {0xF1, 0x27},
+    {0xF0, 0x9B},
+    {0xF0, 0x1B},
+    {0xF1, 0x26},
+    {0xF0, 0x9C},
+    {0xF0, 0x1C},
+    {0xF1, 0x25},
+    {0xF0, 0x9D},
+    {0xF0, 0x1D},
+    {0xF1, 0x24},
+    {0xF0, 0x9E},
+    {0xF0, 0x1E},
+    {0xF1, 0x24},
+    {0xF0, 0x9F},
+    {0xF0, 0x1F},
+    {0xF1, 0x23},
+    {0xF0, 0xA0},
+    {0xF0, 0x20},
+    {0xF1, 0x22},
+    {0xF0, 0xA1},
+    {0xF0, 0x21},
+    {0xF1, 0x21},
+    {0xF0, 0xA2},
+    {0xF0, 0x22},
+    {0xF1, 0x20},
+    {0xF0, 0xA3},
+    {0xF0, 0x23},
+    {0xF1, 0x20},
+    {0xF0, 0xA4},
+    {0xF0, 0x24},
+    {0xF1, 0x1F},
+    {0xF0, 0xA5},
+    {0xF0, 0x25},
+    {0xF1, 0x1E},
+    {0xF0, 0xA6},
+    {0xF0, 0x26},
+    {0xF1, 0x1D},
+    {0xF0, 0xA7},
+    {0xF0, 0x27},
+    {0xF1, 0x1C},
+    {0xF0, 0xA8},
+    {0xF0, 0x28},
+    {0xF1, 0x1B},
+    {0xF0, 0xA9},
+    {0xF0, 0x29},
+    {0xF1, 0x1B},
+    {0xF0, 0xAA},
+    {0xF0, 0x2A},
+    {0xF1, 0x1A},
+    {0xF0, 0xAB},
+    {0xF0, 0x2B},
+    {0xF1, 0x1A},
+    {0xF0, 0xAC},
+    {0xF0, 0x2C},
+    {0xF1, 0x19},
+    {0xF0, 0xAD},
+    {0xF0, 0x2D},
+    {0xF1, 0x18},
+    {0xF0, 0xAE},
+    {0xF0, 0x2E},
+    {0xF1, 0x17},
+    {0xF0, 0xAF},
+    {0xF0, 0x2F},
+    {0xF1, 0x16},
+    {0xF0, 0xB0},
+    {0xF0, 0x30},
+    {0xF1, 0x15},
+    {0xF0, 0xB1},
+    {0xF0, 0x31},
+    {0xF1, 0x15},
+    {0xF0, 0xB2},
+    {0xF0, 0x32},
+    {0xF1, 0x15},
+    {0xF0, 0xB3},
+    {0xF0, 0x33},
+    {0xF1, 0x14},
+    {0xF0, 0xB4},
+    {0xF0, 0x34},
+    {0xF1, 0x13},
+    {0xF0, 0xB5},
+    {0xF0, 0x35},
+    {0xF1, 0x12},
+    {0xF0, 0xB6},
+    {0xF0, 0x36},
+    {0xF1, 0x11},
+    {0xF0, 0xB7},
+    {0xF0, 0x37},
+    {0xF1, 0x10},
+    {0xF0, 0xB8},
+    {0xF0, 0x38},
+    {0xF1, 0x0F},
+    {0xF0, 0xB9},
+    {0xF0, 0x39},
+    {0xF1, 0x0E},
+    {0xF0, 0xBA},
+    {0xF0, 0x3A},
+    {0xF1, 0x0D},
+    {0xF0, 0xBB},
+    {0xF0, 0x3B},
+    {0xF1, 0x0C},
+    {0xF0, 0xBC},
+    {0xF0, 0x3C},
+    {0xF1, 0x0B},
+    {0xF0, 0xBD},
+    {0xF0, 0x3D},
+    {0xF1, 0x0B},
+    {0xF0, 0xBE},
+    {0xF0, 0x3E},
+    {0xF1, 0x0A},
+    {0xF0, 0xBF},
+    {0xF0, 0x3F},
+    {0xF1, 0x09},
+    {0xF0, 0x00},
+};
+
+#define CB_VT3253B0_INIT_FOR_AIROHA2230 256
+// For AIROHA
+BYTE byVT3253B0_AIROHA2230[CB_VT3253B0_INIT_FOR_AIROHA2230][2] = {
+    {0x00, 0x31},
+    {0x01, 0x00},
+    {0x02, 0x00},
+    {0x03, 0x00},
+    {0x04, 0x00},
+    {0x05, 0x80},
+    {0x06, 0x00},
+    {0x07, 0x00},
+    {0x08, 0x70},
+    {0x09, 0x41},
+    {0x0a, 0x2A},
+    {0x0b, 0x76},
+    {0x0c, 0x00},
+    {0x0d, 0x00},
+    {0x0e, 0x80},
+    {0x0f, 0x00},
+    {0x10, 0x00},
+    {0x11, 0x00},
+    {0x12, 0x00},
+    {0x13, 0x00},
+    {0x14, 0x00},
+    {0x15, 0x00},
+    {0x16, 0x00},
+    {0x17, 0x00},
+    {0x18, 0x00},
+    {0x19, 0x00},
+    {0x1a, 0x00},
+    {0x1b, 0x8f},
+    {0x1c, 0x09},
+    {0x1d, 0x00},
+    {0x1e, 0x00},
+    {0x1f, 0x00},
+    {0x20, 0x00},
+    {0x21, 0x00},
+    {0x22, 0x00},
+    {0x23, 0x00},
+    {0x24, 0x00},
+    {0x25, 0x4a},
+    {0x26, 0x00},
+    {0x27, 0x00},
+    {0x28, 0x00},
+    {0x29, 0x00},
+    {0x2a, 0x00},
+    {0x2b, 0x00},
+    {0x2c, 0x00},
+    {0x2d, 0x4a},
+    {0x2e, 0x00},
+    {0x2f, 0x0a},
+    {0x30, 0x26},
+    {0x31, 0x5b},
+    {0x32, 0x00},
+    {0x33, 0x00},
+    {0x34, 0x00},
+    {0x35, 0x00},
+    {0x36, 0xaa},
+    {0x37, 0xaa},
+    {0x38, 0xff},
+    {0x39, 0xff},
+    {0x3a, 0x79},
+    {0x3b, 0x00},
+    {0x3c, 0x00},
+    {0x3d, 0x0b},
+    {0x3e, 0x48},
+    {0x3f, 0x04},
+    {0x40, 0x00},
+    {0x41, 0x08},
+    {0x42, 0x00},
+    {0x43, 0x08},
+    {0x44, 0x08},
+    {0x45, 0x14},
+    {0x46, 0x05},
+    {0x47, 0x09},
+    {0x48, 0x00},
+    {0x49, 0x00},
+    {0x4a, 0x00},
+    {0x4b, 0x00},
+    {0x4c, 0x09},
+    {0x4d, 0x73},
+    {0x4e, 0x00},
+    {0x4f, 0xc5},
+    {0x50, 0x15},
+    {0x51, 0x19},
+    {0x52, 0x00},
+    {0x53, 0x00},
+    {0x54, 0x00},
+    {0x55, 0x00},
+    {0x56, 0x00},
+    {0x57, 0x00},
+    {0x58, 0x00},
+    {0x59, 0xb0},
+    {0x5a, 0x00},
+    {0x5b, 0x00},
+    {0x5c, 0x00},
+    {0x5d, 0x00},
+    {0x5e, 0x00},
+    {0x5f, 0x00},
+    {0x60, 0xe4},
+    {0x61, 0x80},
+    {0x62, 0x00},
+    {0x63, 0x00},
+    {0x64, 0x00},
+    {0x65, 0x00},
+    {0x66, 0x98},
+    {0x67, 0x0a},
+    {0x68, 0x00},
+    {0x69, 0x00},
+    {0x6a, 0x00},
+    {0x6b, 0x00},
+    //{0x6c, 0x80},
+    {0x6c, 0x00}, //RobertYu:20050125, request by JJSue
+    {0x6d, 0x03},
+    {0x6e, 0x01},
+    {0x6f, 0x00},
+    {0x70, 0x00},
+    {0x71, 0x00},
+    {0x72, 0x00},
+    {0x73, 0x00},
+    {0x74, 0x00},
+    {0x75, 0x00},
+    {0x76, 0x00},
+    {0x77, 0x00},
+    {0x78, 0x00},
+    {0x79, 0x00},
+    {0x7a, 0x00},
+    {0x7b, 0x00},
+    {0x7c, 0x00},
+    {0x7d, 0x00},
+    {0x7e, 0x00},
+    {0x7f, 0x00},
+    {0x80, 0x8c},
+    {0x81, 0x01},
+    {0x82, 0x09},
+    {0x83, 0x00},
+    {0x84, 0x00},
+    {0x85, 0x00},
+    {0x86, 0x00},
+    {0x87, 0x00},
+    {0x88, 0x08},
+    {0x89, 0x00},
+    {0x8a, 0x0f},
+    {0x8b, 0xb7},
+    {0x8c, 0x88},
+    {0x8d, 0x47},
+    {0x8e, 0xaa},
+    {0x8f, 0x02},
+    {0x90, 0x22},
+    {0x91, 0x00},
+    {0x92, 0x00},
+    {0x93, 0x00},
+    {0x94, 0x00},
+    {0x95, 0x00},
+    {0x96, 0x00},
+    {0x97, 0xeb},
+    {0x98, 0x00},
+    {0x99, 0x00},
+    {0x9a, 0x00},
+    {0x9b, 0x00},
+    {0x9c, 0x00},
+    {0x9d, 0x00},
+    {0x9e, 0x00},
+    {0x9f, 0x01},
+    {0xa0, 0x00},
+    {0xa1, 0x00},
+    {0xa2, 0x00},
+    {0xa3, 0x00},
+    {0xa4, 0x00},
+    {0xa5, 0x00},
+    {0xa6, 0x10},
+    {0xa7, 0x00},
+    {0xa8, 0x18},
+    {0xa9, 0x00},
+    {0xaa, 0x00},
+    {0xab, 0x00},
+    {0xac, 0x00},
+    {0xad, 0x00},
+    {0xae, 0x00},
+    {0xaf, 0x18},
+    {0xb0, 0x38},
+    {0xb1, 0x30},
+    {0xb2, 0x00},
+    {0xb3, 0x00},
+    {0xb4, 0xff},
+    {0xb5, 0x0f},
+    {0xb6, 0xe4},
+    {0xb7, 0xe2},
+    {0xb8, 0x00},
+    {0xb9, 0x00},
+    {0xba, 0x00},
+    {0xbb, 0x03},
+    {0xbc, 0x01},
+    {0xbd, 0x00},
+    {0xbe, 0x00},
+    {0xbf, 0x00},
+    {0xc0, 0x18},
+    {0xc1, 0x20},
+    {0xc2, 0x07},
+    {0xc3, 0x18},
+    {0xc4, 0xff},
+    {0xc5, 0x2c},
+    {0xc6, 0x0c},
+    {0xc7, 0x0a},
+    {0xc8, 0x0e},
+    {0xc9, 0x01},
+    {0xca, 0x68},
+    {0xcb, 0xa7},
+    {0xcc, 0x3c},
+    {0xcd, 0x10},
+    {0xce, 0x00},
+    {0xcf, 0x25},
+    {0xd0, 0x40},
+    {0xd1, 0x12},
+    {0xd2, 0x00},
+    {0xd3, 0x00},
+    {0xd4, 0x10},
+    {0xd5, 0x28},
+    {0xd6, 0x80},
+    {0xd7, 0x2A},
+    {0xd8, 0x00},
+    {0xd9, 0x00},
+    {0xda, 0x00},
+    {0xdb, 0x00},
+    {0xdc, 0x00},
+    {0xdd, 0x00},
+    {0xde, 0x00},
+    {0xdf, 0x00},
+    {0xe0, 0x00},
+    {0xe1, 0xB3},
+    {0xe2, 0x00},
+    {0xe3, 0x00},
+    {0xe4, 0x00},
+    {0xe5, 0x10},
+    {0xe6, 0x00},
+    {0xe7, 0x1C},
+    {0xe8, 0x00},
+    {0xe9, 0xf4},
+    {0xea, 0x00},
+    {0xeb, 0xff},
+    {0xec, 0x79},
+    {0xed, 0x20},
+    {0xee, 0x30},
+    {0xef, 0x01},
+    {0xf0, 0x00},
+    {0xf1, 0x3e},
+    {0xf2, 0x00},
+    {0xf3, 0x00},
+    {0xf4, 0x00},
+    {0xf5, 0x00},
+    {0xf6, 0x00},
+    {0xf7, 0x00},
+    {0xf8, 0x00},
+    {0xf9, 0x00},
+    {0xfa, 0x00},
+    {0xfb, 0x00},
+    {0xfc, 0x00},
+    {0xfd, 0x00},
+    {0xfe, 0x00},
+    {0xff, 0x00},
+};
+
+
+
+#define CB_VT3253B0_INIT_FOR_UW2451 256
+//For UW2451
+BYTE byVT3253B0_UW2451[CB_VT3253B0_INIT_FOR_UW2451][2] = {
+    {0x00, 0x31},
+    {0x01, 0x00},
+    {0x02, 0x00},
+    {0x03, 0x00},
+    {0x04, 0x00},
+    {0x05, 0x81},
+    {0x06, 0x00},
+    {0x07, 0x00},
+    {0x08, 0x38},
+    {0x09, 0x45},
+    {0x0a, 0x28},
+    {0x0b, 0x76},
+    {0x0c, 0x00},
+    {0x0d, 0x00},
+    {0x0e, 0x80},
+    {0x0f, 0x00},
+    {0x10, 0x00},
+    {0x11, 0x00},
+    {0x12, 0x00},
+    {0x13, 0x00},
+    {0x14, 0x00},
+    {0x15, 0x00},
+    {0x16, 0x00},
+    {0x17, 0x00},
+    {0x18, 0x00},
+    {0x19, 0x00},
+    {0x1a, 0x00},
+    {0x1b, 0x8f},
+    {0x1c, 0x0f},
+    {0x1d, 0x00},
+    {0x1e, 0x00},
+    {0x1f, 0x00},
+    {0x20, 0x00},
+    {0x21, 0x00},
+    {0x22, 0x00},
+    {0x23, 0x00},
+    {0x24, 0x00},
+    {0x25, 0x4a},
+    {0x26, 0x00},
+    {0x27, 0x00},
+    {0x28, 0x00},
+    {0x29, 0x00},
+    {0x2a, 0x00},
+    {0x2b, 0x00},
+    {0x2c, 0x00},
+    {0x2d, 0x18},
+    {0x2e, 0x00},
+    {0x2f, 0x0a},
+    {0x30, 0x26},
+    {0x31, 0x5b},
+    {0x32, 0x00},
+    {0x33, 0x00},
+    {0x34, 0x00},
+    {0x35, 0x00},
+    {0x36, 0xaa},
+    {0x37, 0xaa},
+    {0x38, 0xff},
+    {0x39, 0xff},
+    {0x3a, 0x00},
+    {0x3b, 0x00},
+    {0x3c, 0x00},
+    {0x3d, 0x03},
+    {0x3e, 0x1d},
+    {0x3f, 0x04},
+    {0x40, 0x00},
+    {0x41, 0x08},
+    {0x42, 0x00},
+    {0x43, 0x08},
+    {0x44, 0x08},
+    {0x45, 0x14},
+    {0x46, 0x05},
+    {0x47, 0x09},
+    {0x48, 0x00},
+    {0x49, 0x00},
+    {0x4a, 0x00},
+    {0x4b, 0x00},
+    {0x4c, 0x09},
+    {0x4d, 0x90},
+    {0x4e, 0x00},
+    {0x4f, 0xc5},
+    {0x50, 0x15},
+    {0x51, 0x19},
+    {0x52, 0x00},
+    {0x53, 0x00},
+    {0x54, 0x00},
+    {0x55, 0x00},
+    {0x56, 0x00},
+    {0x57, 0x00},
+    {0x58, 0x00},
+    {0x59, 0xb0},
+    {0x5a, 0x00},
+    {0x5b, 0x00},
+    {0x5c, 0x00},
+    {0x5d, 0x00},
+    {0x5e, 0x00},
+    {0x5f, 0x00},
+    {0x60, 0xb3},
+    {0x61, 0x81},
+    {0x62, 0x00},
+    {0x63, 0x00},
+    {0x64, 0x00},
+    {0x65, 0x00},
+    {0x66, 0x57},
+    {0x67, 0x6c},
+    {0x68, 0x00},
+    {0x69, 0x00},
+    {0x6a, 0x00},
+    {0x6b, 0x00},
+    //{0x6c, 0x80},
+    {0x6c, 0x00}, //RobertYu:20050125, request by JJSue
+    {0x6d, 0x03},
+    {0x6e, 0x01},
+    {0x6f, 0x00},
+    {0x70, 0x00},
+    {0x71, 0x00},
+    {0x72, 0x00},
+    {0x73, 0x00},
+    {0x74, 0x00},
+    {0x75, 0x00},
+    {0x76, 0x00},
+    {0x77, 0x00},
+    {0x78, 0x00},
+    {0x79, 0x00},
+    {0x7a, 0x00},
+    {0x7b, 0x00},
+    {0x7c, 0x00},
+    {0x7d, 0x00},
+    {0x7e, 0x00},
+    {0x7f, 0x00},
+    {0x80, 0x8c},
+    {0x81, 0x00},
+    {0x82, 0x0e},
+    {0x83, 0x00},
+    {0x84, 0x00},
+    {0x85, 0x00},
+    {0x86, 0x00},
+    {0x87, 0x00},
+    {0x88, 0x08},
+    {0x89, 0x00},
+    {0x8a, 0x0e},
+    {0x8b, 0xa7},
+    {0x8c, 0x88},
+    {0x8d, 0x47},
+    {0x8e, 0xaa},
+    {0x8f, 0x02},
+    {0x90, 0x00},
+    {0x91, 0x00},
+    {0x92, 0x00},
+    {0x93, 0x00},
+    {0x94, 0x00},
+    {0x95, 0x00},
+    {0x96, 0x00},
+    {0x97, 0xe3},
+    {0x98, 0x00},
+    {0x99, 0x00},
+    {0x9a, 0x00},
+    {0x9b, 0x00},
+    {0x9c, 0x00},
+    {0x9d, 0x00},
+    {0x9e, 0x00},
+    {0x9f, 0x00},
+    {0xa0, 0x00},
+    {0xa1, 0x00},
+    {0xa2, 0x00},
+    {0xa3, 0x00},
+    {0xa4, 0x00},
+    {0xa5, 0x00},
+    {0xa6, 0x10},
+    {0xa7, 0x00},
+    {0xa8, 0x18},
+    {0xa9, 0x00},
+    {0xaa, 0x00},
+    {0xab, 0x00},
+    {0xac, 0x00},
+    {0xad, 0x00},
+    {0xae, 0x00},
+    {0xaf, 0x18},
+    {0xb0, 0x18},
+    {0xb1, 0x30},
+    {0xb2, 0x00},
+    {0xb3, 0x00},
+    {0xb4, 0x00},
+    {0xb5, 0x00},
+    {0xb6, 0x00},
+    {0xb7, 0x00},
+    {0xb8, 0x00},
+    {0xb9, 0x00},
+    {0xba, 0x00},
+    {0xbb, 0x03},
+    {0xbc, 0x01},
+    {0xbd, 0x00},
+    {0xbe, 0x00},
+    {0xbf, 0x00},
+    {0xc0, 0x10},
+    {0xc1, 0x20},
+    {0xc2, 0x00},
+    {0xc3, 0x20},
+    {0xc4, 0x00},
+    {0xc5, 0x2c},
+    {0xc6, 0x1c},
+    {0xc7, 0x10},
+    {0xc8, 0x10},
+    {0xc9, 0x01},
+    {0xca, 0x68},
+    {0xcb, 0xa7},
+    {0xcc, 0x3c},
+    {0xcd, 0x09},
+    {0xce, 0x00},
+    {0xcf, 0x20},
+    {0xd0, 0x40},
+    {0xd1, 0x10},
+    {0xd2, 0x00},
+    {0xd3, 0x00},
+    {0xd4, 0x20},
+    {0xd5, 0x28},
+    {0xd6, 0xa0},
+    {0xd7, 0x2a},
+    {0xd8, 0x00},
+    {0xd9, 0x00},
+    {0xda, 0x00},
+    {0xdb, 0x00},
+    {0xdc, 0x00},
+    {0xdd, 0x00},
+    {0xde, 0x00},
+    {0xdf, 0x00},
+    {0xe0, 0x00},
+    {0xe1, 0xd3},
+    {0xe2, 0xc0},
+    {0xe3, 0x00},
+    {0xe4, 0x00},
+    {0xe5, 0x10},
+    {0xe6, 0x00},
+    {0xe7, 0x12},
+    {0xe8, 0x12},
+    {0xe9, 0x34},
+    {0xea, 0x00},
+    {0xeb, 0xff},
+    {0xec, 0x79},
+    {0xed, 0x20},
+    {0xee, 0x30},
+    {0xef, 0x01},
+    {0xf0, 0x00},
+    {0xf1, 0x3e},
+    {0xf2, 0x00},
+    {0xf3, 0x00},
+    {0xf4, 0x00},
+    {0xf5, 0x00},
+    {0xf6, 0x00},
+    {0xf7, 0x00},
+    {0xf8, 0x00},
+    {0xf9, 0x00},
+    {0xfa, 0x00},
+    {0xfb, 0x00},
+    {0xfc, 0x00},
+    {0xfd, 0x00},
+    {0xfe, 0x00},
+    {0xff, 0x00},
+};
+
+#define CB_VT3253B0_AGC 193
+// For AIROHA
+BYTE byVT3253B0_AGC[CB_VT3253B0_AGC][2] = {
+    {0xF0, 0x00},
+    {0xF1, 0x00},
+    {0xF0, 0x80},
+    {0xF0, 0x01},
+    {0xF1, 0x00},
+    {0xF0, 0x81},
+    {0xF0, 0x02},
+    {0xF1, 0x02},
+    {0xF0, 0x82},
+    {0xF0, 0x03},
+    {0xF1, 0x04},
+    {0xF0, 0x83},
+    {0xF0, 0x03},
+    {0xF1, 0x04},
+    {0xF0, 0x84},
+    {0xF0, 0x04},
+    {0xF1, 0x06},
+    {0xF0, 0x85},
+    {0xF0, 0x05},
+    {0xF1, 0x06},
+    {0xF0, 0x86},
+    {0xF0, 0x06},
+    {0xF1, 0x06},
+    {0xF0, 0x87},
+    {0xF0, 0x07},
+    {0xF1, 0x08},
+    {0xF0, 0x88},
+    {0xF0, 0x08},
+    {0xF1, 0x08},
+    {0xF0, 0x89},
+    {0xF0, 0x09},
+    {0xF1, 0x0A},
+    {0xF0, 0x8A},
+    {0xF0, 0x0A},
+    {0xF1, 0x0A},
+    {0xF0, 0x8B},
+    {0xF0, 0x0B},
+    {0xF1, 0x0C},
+    {0xF0, 0x8C},
+    {0xF0, 0x0C},
+    {0xF1, 0x0C},
+    {0xF0, 0x8D},
+    {0xF0, 0x0D},
+    {0xF1, 0x0E},
+    {0xF0, 0x8E},
+    {0xF0, 0x0E},
+    {0xF1, 0x0E},
+    {0xF0, 0x8F},
+    {0xF0, 0x0F},
+    {0xF1, 0x10},
+    {0xF0, 0x90},
+    {0xF0, 0x10},
+    {0xF1, 0x10},
+    {0xF0, 0x91},
+    {0xF0, 0x11},
+    {0xF1, 0x12},
+    {0xF0, 0x92},
+    {0xF0, 0x12},
+    {0xF1, 0x12},
+    {0xF0, 0x93},
+    {0xF0, 0x13},
+    {0xF1, 0x14},
+    {0xF0, 0x94},
+    {0xF0, 0x14},
+    {0xF1, 0x14},
+    {0xF0, 0x95},
+    {0xF0, 0x15},
+    {0xF1, 0x16},
+    {0xF0, 0x96},
+    {0xF0, 0x16},
+    {0xF1, 0x16},
+    {0xF0, 0x97},
+    {0xF0, 0x17},
+    {0xF1, 0x18},
+    {0xF0, 0x98},
+    {0xF0, 0x18},
+    {0xF1, 0x18},
+    {0xF0, 0x99},
+    {0xF0, 0x19},
+    {0xF1, 0x1A},
+    {0xF0, 0x9A},
+    {0xF0, 0x1A},
+    {0xF1, 0x1A},
+    {0xF0, 0x9B},
+    {0xF0, 0x1B},
+    {0xF1, 0x1C},
+    {0xF0, 0x9C},
+    {0xF0, 0x1C},
+    {0xF1, 0x1C},
+    {0xF0, 0x9D},
+    {0xF0, 0x1D},
+    {0xF1, 0x1E},
+    {0xF0, 0x9E},
+    {0xF0, 0x1E},
+    {0xF1, 0x1E},
+    {0xF0, 0x9F},
+    {0xF0, 0x1F},
+    {0xF1, 0x20},
+    {0xF0, 0xA0},
+    {0xF0, 0x20},
+    {0xF1, 0x20},
+    {0xF0, 0xA1},
+    {0xF0, 0x21},
+    {0xF1, 0x22},
+    {0xF0, 0xA2},
+    {0xF0, 0x22},
+    {0xF1, 0x22},
+    {0xF0, 0xA3},
+    {0xF0, 0x23},
+    {0xF1, 0x24},
+    {0xF0, 0xA4},
+    {0xF0, 0x24},
+    {0xF1, 0x24},
+    {0xF0, 0xA5},
+    {0xF0, 0x25},
+    {0xF1, 0x26},
+    {0xF0, 0xA6},
+    {0xF0, 0x26},
+    {0xF1, 0x26},
+    {0xF0, 0xA7},
+    {0xF0, 0x27},
+    {0xF1, 0x28},
+    {0xF0, 0xA8},
+    {0xF0, 0x28},
+    {0xF1, 0x28},
+    {0xF0, 0xA9},
+    {0xF0, 0x29},
+    {0xF1, 0x2A},
+    {0xF0, 0xAA},
+    {0xF0, 0x2A},
+    {0xF1, 0x2A},
+    {0xF0, 0xAB},
+    {0xF0, 0x2B},
+    {0xF1, 0x2C},
+    {0xF0, 0xAC},
+    {0xF0, 0x2C},
+    {0xF1, 0x2C},
+    {0xF0, 0xAD},
+    {0xF0, 0x2D},
+    {0xF1, 0x2E},
+    {0xF0, 0xAE},
+    {0xF0, 0x2E},
+    {0xF1, 0x2E},
+    {0xF0, 0xAF},
+    {0xF0, 0x2F},
+    {0xF1, 0x30},
+    {0xF0, 0xB0},
+    {0xF0, 0x30},
+    {0xF1, 0x30},
+    {0xF0, 0xB1},
+    {0xF0, 0x31},
+    {0xF1, 0x32},
+    {0xF0, 0xB2},
+    {0xF0, 0x32},
+    {0xF1, 0x32},
+    {0xF0, 0xB3},
+    {0xF0, 0x33},
+    {0xF1, 0x34},
+    {0xF0, 0xB4},
+    {0xF0, 0x34},
+    {0xF1, 0x34},
+    {0xF0, 0xB5},
+    {0xF0, 0x35},
+    {0xF1, 0x36},
+    {0xF0, 0xB6},
+    {0xF0, 0x36},
+    {0xF1, 0x36},
+    {0xF0, 0xB7},
+    {0xF0, 0x37},
+    {0xF1, 0x38},
+    {0xF0, 0xB8},
+    {0xF0, 0x38},
+    {0xF1, 0x38},
+    {0xF0, 0xB9},
+    {0xF0, 0x39},
+    {0xF1, 0x3A},
+    {0xF0, 0xBA},
+    {0xF0, 0x3A},
+    {0xF1, 0x3A},
+    {0xF0, 0xBB},
+    {0xF0, 0x3B},
+    {0xF1, 0x3C},
+    {0xF0, 0xBC},
+    {0xF0, 0x3C},
+    {0xF1, 0x3C},
+    {0xF0, 0xBD},
+    {0xF0, 0x3D},
+    {0xF1, 0x3E},
+    {0xF0, 0xBE},
+    {0xF0, 0x3E},
+    {0xF1, 0x3E},
+    {0xF0, 0xBF},
+    {0xF0, 0x00},
+};
+
+const WORD awcFrameTime[MAX_RATE] =
+{10, 20, 55, 110, 24, 36, 48, 72, 96, 144, 192, 216};
+
+
+/*---------------------  Static Functions  --------------------------*/
+
+static
+ULONG
+s_ulGetRatio(PSDevice pDevice);
+
+static
+VOID
+s_vChangeAntenna(
+    IN PSDevice pDevice
+    );
+
+static
+VOID
+s_vChangeAntenna (
+    IN PSDevice pDevice
+    )
+{
+
+#ifdef	PLICE_DEBUG
+	//printk("Enter s_vChangeAntenna:original RxMode is %d,TxMode is %d\n",pDevice->byRxAntennaMode,pDevice->byTxAntennaMode);
+#endif
+    if ( pDevice->dwRxAntennaSel == 0) {
+        pDevice->dwRxAntennaSel=1;
+        if (pDevice->bTxRxAntInv == TRUE)
+            BBvSetRxAntennaMode(pDevice->PortOffset, ANT_A);
+        else
+            BBvSetRxAntennaMode(pDevice->PortOffset, ANT_B);
+    } else {
+        pDevice->dwRxAntennaSel=0;
+        if (pDevice->bTxRxAntInv == TRUE)
+            BBvSetRxAntennaMode(pDevice->PortOffset, ANT_B);
+        else
+            BBvSetRxAntennaMode(pDevice->PortOffset, ANT_A);
+    }
+    if ( pDevice->dwTxAntennaSel == 0) {
+        pDevice->dwTxAntennaSel=1;
+        BBvSetTxAntennaMode(pDevice->PortOffset, ANT_B);
+    } else {
+        pDevice->dwTxAntennaSel=0;
+        BBvSetTxAntennaMode(pDevice->PortOffset, ANT_A);
+    }
+}
+
+
+/*---------------------  Export Variables  --------------------------*/
+/*
+ * Description: Calculate data frame transmitting time
+ *
+ * Parameters:
+ *  In:
+ *      byPreambleType  - Preamble Type
+ *      byPktType        - PK_TYPE_11A, PK_TYPE_11B, PK_TYPE_11GB, PK_TYPE_11GA
+ *      cbFrameLength   - Baseband Type
+ *      wRate           - Tx Rate
+ *  Out:
+ *
+ * Return Value: FrameTime
+ *
+ */
+UINT
+BBuGetFrameTime (
+    IN BYTE byPreambleType,
+    IN BYTE byPktType,
+    IN UINT cbFrameLength,
+    IN WORD wRate
+    )
+{
+    UINT uFrameTime;
+    UINT uPreamble;
+    UINT uTmp;
+    UINT uRateIdx = (UINT)wRate;
+    UINT uRate = 0;
+
+
+    if (uRateIdx > RATE_54M) {
+        return 0;
+    }
+
+    uRate = (UINT)awcFrameTime[uRateIdx];
+
+    if (uRateIdx <= 3) {          //CCK mode
+
+        if (byPreambleType == 1) {//Short
+            uPreamble = 96;
+        } else {
+            uPreamble = 192;
+        }
+        uFrameTime = (cbFrameLength * 80) / uRate;  //?????
+        uTmp = (uFrameTime * uRate) / 80;
+        if (cbFrameLength != uTmp) {
+            uFrameTime ++;
+        }
+
+        return (uPreamble + uFrameTime);
+    }
+    else {
+        uFrameTime = (cbFrameLength * 8 + 22) / uRate;   //????????
+        uTmp = ((uFrameTime * uRate) - 22) / 8;
+        if(cbFrameLength != uTmp) {
+            uFrameTime ++;
+        }
+        uFrameTime = uFrameTime * 4;    //???????
+        if(byPktType != PK_TYPE_11A) {
+            uFrameTime += 6;     //??????
+        }
+        return (20 + uFrameTime); //??????
+    }
+}
+
+/*
+ * Description: Caculate Length, Service, and Signal fields of Phy for Tx
+ *
+ * Parameters:
+ *  In:
+ *      pDevice         - Device Structure
+ *      cbFrameLength   - Tx Frame Length
+ *      wRate           - Tx Rate
+ *  Out:
+ *      pwPhyLen        - pointer to Phy Length field
+ *      pbyPhySrv       - pointer to Phy Service field
+ *      pbyPhySgn       - pointer to Phy Signal field
+ *
+ * Return Value: none
+ *
+ */
+VOID
+BBvCaculateParameter (
+    IN  PSDevice pDevice,
+    IN  UINT cbFrameLength,
+    IN  WORD wRate,
+    IN  BYTE byPacketType,
+    OUT PWORD pwPhyLen,
+    OUT PBYTE pbyPhySrv,
+    OUT PBYTE pbyPhySgn
+    )
+{
+    UINT cbBitCount;
+    UINT cbUsCount = 0;
+    UINT cbTmp;
+    BOOL bExtBit;
+    BYTE byPreambleType = pDevice->byPreambleType;
+    BOOL bCCK = pDevice->bCCK;
+
+    cbBitCount = cbFrameLength * 8;
+    bExtBit = FALSE;
+
+    switch (wRate) {
+    case RATE_1M :
+        cbUsCount = cbBitCount;
+        *pbyPhySgn = 0x00;
+        break;
+
+    case RATE_2M :
+        cbUsCount = cbBitCount / 2;
+        if (byPreambleType == 1)
+            *pbyPhySgn = 0x09;
+        else // long preamble
+            *pbyPhySgn = 0x01;
+        break;
+
+    case RATE_5M :
+        if (bCCK == FALSE)
+            cbBitCount ++;
+        cbUsCount = (cbBitCount * 10) / 55;
+        cbTmp = (cbUsCount * 55) / 10;
+        if (cbTmp != cbBitCount)
+            cbUsCount ++;
+        if (byPreambleType == 1)
+            *pbyPhySgn = 0x0a;
+        else // long preamble
+            *pbyPhySgn = 0x02;
+        break;
+
+    case RATE_11M :
+
+        if (bCCK == FALSE)
+            cbBitCount ++;
+        cbUsCount = cbBitCount / 11;
+        cbTmp = cbUsCount * 11;
+        if (cbTmp != cbBitCount) {
+            cbUsCount ++;
+            if ((cbBitCount - cbTmp) <= 3)
+                bExtBit = TRUE;
+        }
+        if (byPreambleType == 1)
+            *pbyPhySgn = 0x0b;
+        else // long preamble
+            *pbyPhySgn = 0x03;
+        break;
+
+    case RATE_6M :
+        if(byPacketType == PK_TYPE_11A) {//11a, 5GHZ
+            *pbyPhySgn = 0x9B; //1001 1011
+        }
+        else {//11g, 2.4GHZ
+            *pbyPhySgn = 0x8B; //1000 1011
+        }
+        break;
+
+    case RATE_9M :
+        if(byPacketType == PK_TYPE_11A) {//11a, 5GHZ
+            *pbyPhySgn = 0x9F; //1001 1111
+        }
+        else {//11g, 2.4GHZ
+            *pbyPhySgn = 0x8F; //1000 1111
+        }
+        break;
+
+    case RATE_12M :
+        if(byPacketType == PK_TYPE_11A) {//11a, 5GHZ
+            *pbyPhySgn = 0x9A; //1001 1010
+        }
+        else {//11g, 2.4GHZ
+            *pbyPhySgn = 0x8A; //1000 1010
+        }
+        break;
+
+    case RATE_18M :
+        if(byPacketType == PK_TYPE_11A) {//11a, 5GHZ
+            *pbyPhySgn = 0x9E; //1001 1110
+        }
+        else {//11g, 2.4GHZ
+            *pbyPhySgn = 0x8E; //1000 1110
+        }
+        break;
+
+    case RATE_24M :
+        if(byPacketType == PK_TYPE_11A) {//11a, 5GHZ
+            *pbyPhySgn = 0x99; //1001 1001
+        }
+        else {//11g, 2.4GHZ
+            *pbyPhySgn = 0x89; //1000 1001
+        }
+        break;
+
+    case RATE_36M :
+        if(byPacketType == PK_TYPE_11A) {//11a, 5GHZ
+            *pbyPhySgn = 0x9D; //1001 1101
+        }
+        else {//11g, 2.4GHZ
+            *pbyPhySgn = 0x8D; //1000 1101
+        }
+        break;
+
+    case RATE_48M :
+        if(byPacketType == PK_TYPE_11A) {//11a, 5GHZ
+            *pbyPhySgn = 0x98; //1001 1000
+        }
+        else {//11g, 2.4GHZ
+            *pbyPhySgn = 0x88; //1000 1000
+        }
+        break;
+
+    case RATE_54M :
+        if (byPacketType == PK_TYPE_11A) {//11a, 5GHZ
+            *pbyPhySgn = 0x9C; //1001 1100
+        }
+        else {//11g, 2.4GHZ
+            *pbyPhySgn = 0x8C; //1000 1100
+        }
+        break;
+
+    default :
+        if (byPacketType == PK_TYPE_11A) {//11a, 5GHZ
+            *pbyPhySgn = 0x9C; //1001 1100
+        }
+        else {//11g, 2.4GHZ
+            *pbyPhySgn = 0x8C; //1000 1100
+        }
+        break;
+    }
+
+    if (byPacketType == PK_TYPE_11B) {
+        *pbyPhySrv = 0x00;
+        if (bExtBit)
+            *pbyPhySrv = *pbyPhySrv | 0x80;
+        *pwPhyLen = (WORD)cbUsCount;
+    }
+    else {
+        *pbyPhySrv = 0x00;
+        *pwPhyLen = (WORD)cbFrameLength;
+    }
+}
+
+/*
+ * Description: Read a byte from BASEBAND, by embeded programming
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - I/O base address
+ *      byBBAddr    - address of register in Baseband
+ *  Out:
+ *      pbyData     - data read
+ *
+ * Return Value: TRUE if succeeded; FALSE if failed.
+ *
+ */
+BOOL BBbReadEmbeded (DWORD_PTR dwIoBase, BYTE byBBAddr, PBYTE pbyData)
+{
+    WORD    ww;
+    BYTE    byValue;
+
+    // BB reg offset
+    VNSvOutPortB(dwIoBase + MAC_REG_BBREGADR, byBBAddr);
+
+    // turn on REGR
+    MACvRegBitsOn(dwIoBase, MAC_REG_BBREGCTL, BBREGCTL_REGR);
+    // W_MAX_TIMEOUT is the timeout period
+    for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+        VNSvInPortB(dwIoBase + MAC_REG_BBREGCTL, &byValue);
+        if (BITbIsBitOn(byValue, BBREGCTL_DONE))
+            break;
+    }
+
+    // get BB data
+    VNSvInPortB(dwIoBase + MAC_REG_BBREGDATA, pbyData);
+
+    if (ww == W_MAX_TIMEOUT) {
+        DBG_PORT80(0x30);
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" DBG_PORT80(0x30)\n");
+        return FALSE;
+    }
+    return TRUE;
+}
+
+
+/*
+ * Description: Write a Byte to BASEBAND, by embeded programming
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - I/O base address
+ *      byBBAddr    - address of register in Baseband
+ *      byData      - data to write
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if succeeded; FALSE if failed.
+ *
+ */
+BOOL BBbWriteEmbeded (DWORD_PTR dwIoBase, BYTE byBBAddr, BYTE byData)
+{
+    WORD    ww;
+    BYTE    byValue;
+
+    // BB reg offset
+    VNSvOutPortB(dwIoBase + MAC_REG_BBREGADR, byBBAddr);
+    // set BB data
+    VNSvOutPortB(dwIoBase + MAC_REG_BBREGDATA, byData);
+
+    // turn on BBREGCTL_REGW
+    MACvRegBitsOn(dwIoBase, MAC_REG_BBREGCTL, BBREGCTL_REGW);
+    // W_MAX_TIMEOUT is the timeout period
+    for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+        VNSvInPortB(dwIoBase + MAC_REG_BBREGCTL, &byValue);
+        if (BITbIsBitOn(byValue, BBREGCTL_DONE))
+            break;
+    }
+
+    if (ww == W_MAX_TIMEOUT) {
+        DBG_PORT80(0x31);
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" DBG_PORT80(0x31)\n");
+        return FALSE;
+    }
+    return TRUE;
+}
+
+
+/*
+ * Description: Test if all bits are set for the Baseband register
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - I/O base address
+ *      byBBAddr    - address of register in Baseband
+ *      byTestBits  - TestBits
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if all TestBits are set; FALSE otherwise.
+ *
+ */
+BOOL BBbIsRegBitsOn (DWORD_PTR dwIoBase, BYTE byBBAddr, BYTE byTestBits)
+{
+    BYTE byOrgData;
+
+    BBbReadEmbeded(dwIoBase, byBBAddr, &byOrgData);
+    return BITbIsAllBitsOn(byOrgData, byTestBits);
+}
+
+
+/*
+ * Description: Test if all bits are clear for the Baseband register
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - I/O base address
+ *      byBBAddr    - address of register in Baseband
+ *      byTestBits  - TestBits
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if all TestBits are clear; FALSE otherwise.
+ *
+ */
+BOOL BBbIsRegBitsOff (DWORD_PTR dwIoBase, BYTE byBBAddr, BYTE byTestBits)
+{
+    BYTE byOrgData;
+
+    BBbReadEmbeded(dwIoBase, byBBAddr, &byOrgData);
+    return BITbIsAllBitsOff(byOrgData, byTestBits);
+}
+
+/*
+ * Description: VIA VT3253 Baseband chip init function
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - I/O base address
+ *      byRevId     - Revision ID
+ *      byRFType    - RF type
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if succeeded; FALSE if failed.
+ *
+ */
+
+BOOL BBbVT3253Init (PSDevice pDevice)
+{
+    BOOL       bResult = TRUE;
+    int        ii;
+    DWORD_PTR  dwIoBase = pDevice->PortOffset;
+    BYTE       byRFType = pDevice->byRFType;
+    BYTE       byLocalID = pDevice->byLocalID;
+
+    if (byRFType == RF_RFMD2959) {
+        if (byLocalID <= REV_ID_VT3253_A1) {
+            for (ii = 0; ii < CB_VT3253_INIT_FOR_RFMD; ii++) {
+                bResult &= BBbWriteEmbeded(dwIoBase,byVT3253InitTab_RFMD[ii][0],byVT3253InitTab_RFMD[ii][1]);
+            }
+        } else {
+            for (ii = 0; ii < CB_VT3253B0_INIT_FOR_RFMD; ii++) {
+                bResult &= BBbWriteEmbeded(dwIoBase,byVT3253B0_RFMD[ii][0],byVT3253B0_RFMD[ii][1]);
+            }
+            for (ii = 0; ii < CB_VT3253B0_AGC_FOR_RFMD2959; ii++) {
+        	    bResult &= BBbWriteEmbeded(dwIoBase,byVT3253B0_AGC4_RFMD2959[ii][0],byVT3253B0_AGC4_RFMD2959[ii][1]);
+            }
+            VNSvOutPortD(dwIoBase + MAC_REG_ITRTMSET, 0x23);
+            MACvRegBitsOn(dwIoBase, MAC_REG_PAPEDELAY, BIT0);
+        }
+        pDevice->abyBBVGA[0] = 0x18;
+        pDevice->abyBBVGA[1] = 0x0A;
+        pDevice->abyBBVGA[2] = 0x0;
+        pDevice->abyBBVGA[3] = 0x0;
+        pDevice->ldBmThreshold[0] = -70;
+        pDevice->ldBmThreshold[1] = -50;
+        pDevice->ldBmThreshold[2] = 0;
+        pDevice->ldBmThreshold[3] = 0;
+    } else if ((byRFType == RF_AIROHA) || (byRFType == RF_AL2230S) ) {
+        for (ii = 0; ii < CB_VT3253B0_INIT_FOR_AIROHA2230; ii++) {
+    	    bResult &= BBbWriteEmbeded(dwIoBase,byVT3253B0_AIROHA2230[ii][0],byVT3253B0_AIROHA2230[ii][1]);
+    	}
+        for (ii = 0; ii < CB_VT3253B0_AGC; ii++) {
+    	    bResult &= BBbWriteEmbeded(dwIoBase,byVT3253B0_AGC[ii][0],byVT3253B0_AGC[ii][1]);
+    	}
+        pDevice->abyBBVGA[0] = 0x1C;
+        pDevice->abyBBVGA[1] = 0x10;
+        pDevice->abyBBVGA[2] = 0x0;
+        pDevice->abyBBVGA[3] = 0x0;
+        pDevice->ldBmThreshold[0] = -70;
+        pDevice->ldBmThreshold[1] = -48;
+        pDevice->ldBmThreshold[2] = 0;
+        pDevice->ldBmThreshold[3] = 0;
+    } else if (byRFType == RF_UW2451) {
+        for (ii = 0; ii < CB_VT3253B0_INIT_FOR_UW2451; ii++) {
+    	        bResult &= BBbWriteEmbeded(dwIoBase,byVT3253B0_UW2451[ii][0],byVT3253B0_UW2451[ii][1]);
+    	}
+        for (ii = 0; ii < CB_VT3253B0_AGC; ii++) {
+    	    bResult &= BBbWriteEmbeded(dwIoBase,byVT3253B0_AGC[ii][0],byVT3253B0_AGC[ii][1]);
+    	}
+        VNSvOutPortB(dwIoBase + MAC_REG_ITRTMSET, 0x23);
+        MACvRegBitsOn(dwIoBase, MAC_REG_PAPEDELAY, BIT0);
+
+        pDevice->abyBBVGA[0] = 0x14;
+        pDevice->abyBBVGA[1] = 0x0A;
+        pDevice->abyBBVGA[2] = 0x0;
+        pDevice->abyBBVGA[3] = 0x0;
+        pDevice->ldBmThreshold[0] = -60;
+        pDevice->ldBmThreshold[1] = -50;
+        pDevice->ldBmThreshold[2] = 0;
+        pDevice->ldBmThreshold[3] = 0;
+    } else if (byRFType == RF_UW2452) {
+        for (ii = 0; ii < CB_VT3253B0_INIT_FOR_UW2451; ii++) {
+            bResult &= BBbWriteEmbeded(dwIoBase,byVT3253B0_UW2451[ii][0],byVT3253B0_UW2451[ii][1]);
+    	}
+        // Init ANT B select,TX Config CR09 = 0x61->0x45, 0x45->0x41(VC1/VC2 define, make the ANT_A, ANT_B inverted)
+        //bResult &= BBbWriteEmbeded(dwIoBase,0x09,0x41);
+        // Init ANT B select,RX Config CR10 = 0x28->0x2A, 0x2A->0x28(VC1/VC2 define, make the ANT_A, ANT_B inverted)
+        //bResult &= BBbWriteEmbeded(dwIoBase,0x0a,0x28);
+        // Select VC1/VC2, CR215 = 0x02->0x06
+        bResult &= BBbWriteEmbeded(dwIoBase,0xd7,0x06);
+
+        //{{RobertYu:20050125, request by Jack
+        bResult &= BBbWriteEmbeded(dwIoBase,0x90,0x20);
+        bResult &= BBbWriteEmbeded(dwIoBase,0x97,0xeb);
+        //}}
+
+        //{{RobertYu:20050221, request by Jack
+        bResult &= BBbWriteEmbeded(dwIoBase,0xa6,0x00);
+        bResult &= BBbWriteEmbeded(dwIoBase,0xa8,0x30);
+        //}}
+        bResult &= BBbWriteEmbeded(dwIoBase,0xb0,0x58);
+
+        for (ii = 0; ii < CB_VT3253B0_AGC; ii++) {
+    	    bResult &= BBbWriteEmbeded(dwIoBase,byVT3253B0_AGC[ii][0],byVT3253B0_AGC[ii][1]);
+    	}
+        //VNSvOutPortB(dwIoBase + MAC_REG_ITRTMSET, 0x23); // RobertYu: 20050104, 20050131 disable PA_Delay
+        //MACvRegBitsOn(dwIoBase, MAC_REG_PAPEDELAY, BIT0); // RobertYu: 20050104, 20050131 disable PA_Delay
+
+        pDevice->abyBBVGA[0] = 0x14;
+        pDevice->abyBBVGA[1] = 0x0A;
+        pDevice->abyBBVGA[2] = 0x0;
+        pDevice->abyBBVGA[3] = 0x0;
+        pDevice->ldBmThreshold[0] = -60;
+        pDevice->ldBmThreshold[1] = -50;
+        pDevice->ldBmThreshold[2] = 0;
+        pDevice->ldBmThreshold[3] = 0;
+    //}} RobertYu
+
+    } else if (byRFType == RF_VT3226) {
+        for (ii = 0; ii < CB_VT3253B0_INIT_FOR_AIROHA2230; ii++) {
+    	    bResult &= BBbWriteEmbeded(dwIoBase,byVT3253B0_AIROHA2230[ii][0],byVT3253B0_AIROHA2230[ii][1]);
+    	}
+        for (ii = 0; ii < CB_VT3253B0_AGC; ii++) {
+    	    bResult &= BBbWriteEmbeded(dwIoBase,byVT3253B0_AGC[ii][0],byVT3253B0_AGC[ii][1]);
+    	}
+        pDevice->abyBBVGA[0] = 0x1C;
+        pDevice->abyBBVGA[1] = 0x10;
+        pDevice->abyBBVGA[2] = 0x0;
+        pDevice->abyBBVGA[3] = 0x0;
+        pDevice->ldBmThreshold[0] = -70;
+        pDevice->ldBmThreshold[1] = -48;
+        pDevice->ldBmThreshold[2] = 0;
+        pDevice->ldBmThreshold[3] = 0;
+        // Fix VT3226 DFC system timing issue
+        MACvSetRFLE_LatchBase(dwIoBase);
+         //{{ RobertYu: 20050104
+    } else if (byRFType == RF_AIROHA7230) {
+        for (ii = 0; ii < CB_VT3253B0_INIT_FOR_AIROHA2230; ii++) {
+    	    bResult &= BBbWriteEmbeded(dwIoBase,byVT3253B0_AIROHA2230[ii][0],byVT3253B0_AIROHA2230[ii][1]);
+    	}
+
+        //{{ RobertYu:20050223, request by JerryChung
+        // Init ANT B select,TX Config CR09 = 0x61->0x45, 0x45->0x41(VC1/VC2 define, make the ANT_A, ANT_B inverted)
+        //bResult &= BBbWriteEmbeded(dwIoBase,0x09,0x41);
+        // Init ANT B select,RX Config CR10 = 0x28->0x2A, 0x2A->0x28(VC1/VC2 define, make the ANT_A, ANT_B inverted)
+        //bResult &= BBbWriteEmbeded(dwIoBase,0x0a,0x28);
+        // Select VC1/VC2, CR215 = 0x02->0x06
+        bResult &= BBbWriteEmbeded(dwIoBase,0xd7,0x06);
+        //}}
+
+        for (ii = 0; ii < CB_VT3253B0_AGC; ii++) {
+    	    bResult &= BBbWriteEmbeded(dwIoBase,byVT3253B0_AGC[ii][0],byVT3253B0_AGC[ii][1]);
+    	}
+        pDevice->abyBBVGA[0] = 0x1C;
+        pDevice->abyBBVGA[1] = 0x10;
+        pDevice->abyBBVGA[2] = 0x0;
+        pDevice->abyBBVGA[3] = 0x0;
+        pDevice->ldBmThreshold[0] = -70;
+        pDevice->ldBmThreshold[1] = -48;
+        pDevice->ldBmThreshold[2] = 0;
+        pDevice->ldBmThreshold[3] = 0;
+    //}} RobertYu
+    } else {
+    	// No VGA Table now
+    	pDevice->bUpdateBBVGA = FALSE;
+        pDevice->abyBBVGA[0] = 0x1C;
+    }
+
+    if (byLocalID > REV_ID_VT3253_A1) {
+        BBbWriteEmbeded(dwIoBase, 0x04, 0x7F);
+        BBbWriteEmbeded(dwIoBase, 0x0D, 0x01);
+    }
+
+    return bResult;
+}
+
+
+
+/*
+ * Description: Read All Baseband Registers
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - I/O base address
+ *      pbyBBRegs   - Point to struct that stores Baseband Registers
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+VOID BBvReadAllRegs (DWORD_PTR dwIoBase, PBYTE pbyBBRegs)
+{
+    int  ii;
+    BYTE byBase = 1;
+    for (ii = 0; ii < BB_MAX_CONTEXT_SIZE; ii++) {
+        BBbReadEmbeded(dwIoBase, (BYTE)(ii*byBase), pbyBBRegs);
+        pbyBBRegs += byBase;
+    }
+}
+
+/*
+ * Description: Turn on BaseBand Loopback mode
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - I/O base address
+ *      bCCK        - If CCK is set
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+
+
+void BBvLoopbackOn (PSDevice pDevice)
+{
+    BYTE      byData;
+    DWORD_PTR dwIoBase = pDevice->PortOffset;
+
+    //CR C9 = 0x00
+    BBbReadEmbeded(dwIoBase, 0xC9, &pDevice->byBBCRc9);//CR201
+    BBbWriteEmbeded(dwIoBase, 0xC9, 0);
+    BBbReadEmbeded(dwIoBase, 0x4D, &pDevice->byBBCR4d);//CR77
+    BBbWriteEmbeded(dwIoBase, 0x4D, 0x90);
+
+    //CR 88 = 0x02(CCK), 0x03(OFDM)
+    BBbReadEmbeded(dwIoBase, 0x88, &pDevice->byBBCR88);//CR136
+
+    if (pDevice->uConnectionRate <= RATE_11M) { //CCK
+        // Enable internal digital loopback: CR33 |= 0000 0001
+        BBbReadEmbeded(dwIoBase, 0x21, &byData);//CR33
+        BBbWriteEmbeded(dwIoBase, 0x21, (BYTE)(byData | 0x01));//CR33
+        // CR154 = 0x00
+        BBbWriteEmbeded(dwIoBase, 0x9A, 0);   //CR154
+
+        BBbWriteEmbeded(dwIoBase, 0x88, 0x02);//CR239
+    }
+    else { //OFDM
+        // Enable internal digital loopback:CR154 |= 0000 0001
+        BBbReadEmbeded(dwIoBase, 0x9A, &byData);//CR154
+        BBbWriteEmbeded(dwIoBase, 0x9A, (BYTE)(byData | 0x01));//CR154
+        // CR33 = 0x00
+        BBbWriteEmbeded(dwIoBase, 0x21, 0);   //CR33
+
+        BBbWriteEmbeded(dwIoBase, 0x88, 0x03);//CR239
+    }
+
+    //CR14 = 0x00
+    BBbWriteEmbeded(dwIoBase, 0x0E, 0);//CR14
+
+    // Disable TX_IQUN
+    BBbReadEmbeded(pDevice->PortOffset, 0x09, &pDevice->byBBCR09);
+    BBbWriteEmbeded(pDevice->PortOffset, 0x09, (BYTE)(pDevice->byBBCR09 & 0xDE));
+}
+
+/*
+ * Description: Turn off BaseBand Loopback mode
+ *
+ * Parameters:
+ *  In:
+ *      pDevice         - Device Structure
+ *
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void BBvLoopbackOff (PSDevice pDevice)
+{
+    BYTE      byData;
+    DWORD_PTR dwIoBase = pDevice->PortOffset;
+
+    BBbWriteEmbeded(dwIoBase, 0xC9, pDevice->byBBCRc9);//CR201
+    BBbWriteEmbeded(dwIoBase, 0x88, pDevice->byBBCR88);//CR136
+    BBbWriteEmbeded(dwIoBase, 0x09, pDevice->byBBCR09);//CR136
+    BBbWriteEmbeded(dwIoBase, 0x4D, pDevice->byBBCR4d);//CR77
+
+    if (pDevice->uConnectionRate <= RATE_11M) { // CCK
+        // Set the CR33 Bit2 to disable internal Loopback.
+        BBbReadEmbeded(dwIoBase, 0x21, &byData);//CR33
+        BBbWriteEmbeded(dwIoBase, 0x21, (BYTE)(byData & 0xFE));//CR33
+    }
+    else { // OFDM
+        BBbReadEmbeded(dwIoBase, 0x9A, &byData);//CR154
+        BBbWriteEmbeded(dwIoBase, 0x9A, (BYTE)(byData & 0xFE));//CR154
+    }
+    BBbReadEmbeded(dwIoBase, 0x0E, &byData);//CR14
+    BBbWriteEmbeded(dwIoBase, 0x0E, (BYTE)(byData | 0x80));//CR14
+
+}
+
+
+
+/*
+ * Description: Set ShortSlotTime mode
+ *
+ * Parameters:
+ *  In:
+ *      pDevice     - Device Structure
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+VOID
+BBvSetShortSlotTime (PSDevice pDevice)
+{
+    BYTE byBBRxConf=0;
+    BYTE byBBVGA=0;
+
+    BBbReadEmbeded(pDevice->PortOffset, 0x0A, &byBBRxConf);//CR10
+
+    if (pDevice->bShortSlotTime) {
+        byBBRxConf &= 0xDF;//1101 1111
+    } else {
+        byBBRxConf |= 0x20;//0010 0000
+    }
+
+    // patch for 3253B0 Baseband with Cardbus module
+    BBbReadEmbeded(pDevice->PortOffset, 0xE7, &byBBVGA);
+    if (byBBVGA == pDevice->abyBBVGA[0]) {
+        byBBRxConf |= 0x20;//0010 0000
+    }
+
+    BBbWriteEmbeded(pDevice->PortOffset, 0x0A, byBBRxConf);//CR10
+
+}
+
+VOID BBvSetVGAGainOffset(PSDevice pDevice, BYTE byData)
+{
+    BYTE byBBRxConf=0;
+
+    BBbWriteEmbeded(pDevice->PortOffset, 0xE7, byData);
+
+    BBbReadEmbeded(pDevice->PortOffset, 0x0A, &byBBRxConf);//CR10
+    // patch for 3253B0 Baseband with Cardbus module
+    if (byData == pDevice->abyBBVGA[0]) {
+        byBBRxConf |= 0x20;//0010 0000
+    } else if (pDevice->bShortSlotTime) {
+        byBBRxConf &= 0xDF;//1101 1111
+    } else {
+        byBBRxConf |= 0x20;//0010 0000
+    }
+    pDevice->byBBVGACurrent = byData;
+    BBbWriteEmbeded(pDevice->PortOffset, 0x0A, byBBRxConf);//CR10
+}
+
+
+/*
+ * Description: Baseband SoftwareReset
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - I/O base address
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+VOID
+BBvSoftwareReset (DWORD_PTR dwIoBase)
+{
+    BBbWriteEmbeded(dwIoBase, 0x50, 0x40);
+    BBbWriteEmbeded(dwIoBase, 0x50, 0);
+    BBbWriteEmbeded(dwIoBase, 0x9C, 0x01);
+    BBbWriteEmbeded(dwIoBase, 0x9C, 0);
+}
+
+/*
+ * Description: Baseband Power Save Mode ON
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - I/O base address
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+VOID
+BBvPowerSaveModeON (DWORD_PTR dwIoBase)
+{
+    BYTE byOrgData;
+
+    BBbReadEmbeded(dwIoBase, 0x0D, &byOrgData);
+    byOrgData |= BIT0;
+    BBbWriteEmbeded(dwIoBase, 0x0D, byOrgData);
+}
+
+/*
+ * Description: Baseband Power Save Mode OFF
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - I/O base address
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+VOID
+BBvPowerSaveModeOFF (DWORD_PTR dwIoBase)
+{
+    BYTE byOrgData;
+
+    BBbReadEmbeded(dwIoBase, 0x0D, &byOrgData);
+    byOrgData &= ~(BIT0);
+    BBbWriteEmbeded(dwIoBase, 0x0D, byOrgData);
+}
+
+/*
+ * Description: Set Tx Antenna mode
+ *
+ * Parameters:
+ *  In:
+ *      pDevice          - Device Structure
+ *      byAntennaMode    - Antenna Mode
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+
+VOID
+BBvSetTxAntennaMode (DWORD_PTR dwIoBase, BYTE byAntennaMode)
+{
+    BYTE byBBTxConf;
+
+#ifdef	PLICE_DEBUG
+	//printk("Enter BBvSetTxAntennaMode\n");
+#endif
+    BBbReadEmbeded(dwIoBase, 0x09, &byBBTxConf);//CR09
+    if (byAntennaMode == ANT_DIVERSITY) {
+        // bit 1 is diversity
+        byBBTxConf |= 0x02;
+    } else if (byAntennaMode == ANT_A) {
+        // bit 2 is ANTSEL
+        byBBTxConf &= 0xF9; // 1111 1001
+    } else if (byAntennaMode == ANT_B) {
+#ifdef	PLICE_DEBUG
+	//printk("BBvSetTxAntennaMode:ANT_B\n");
+#endif
+        byBBTxConf &= 0xFD; // 1111 1101
+        byBBTxConf |= 0x04;
+    }
+    BBbWriteEmbeded(dwIoBase, 0x09, byBBTxConf);//CR09
+}
+
+
+
+
+/*
+ * Description: Set Rx Antenna mode
+ *
+ * Parameters:
+ *  In:
+ *      pDevice          - Device Structure
+ *      byAntennaMode    - Antenna Mode
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+
+VOID
+BBvSetRxAntennaMode (DWORD_PTR dwIoBase, BYTE byAntennaMode)
+{
+    BYTE byBBRxConf;
+
+    BBbReadEmbeded(dwIoBase, 0x0A, &byBBRxConf);//CR10
+    if (byAntennaMode == ANT_DIVERSITY) {
+        byBBRxConf |= 0x01;
+
+    } else if (byAntennaMode == ANT_A) {
+        byBBRxConf &= 0xFC; // 1111 1100
+    } else if (byAntennaMode == ANT_B) {
+        byBBRxConf &= 0xFE; // 1111 1110
+        byBBRxConf |= 0x02;
+    }
+    BBbWriteEmbeded(dwIoBase, 0x0A, byBBRxConf);//CR10
+}
+
+
+/*
+ * Description: BBvSetDeepSleep
+ *
+ * Parameters:
+ *  In:
+ *      pDevice          - Device Structure
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+VOID
+BBvSetDeepSleep (DWORD_PTR dwIoBase, BYTE byLocalID)
+{
+    BBbWriteEmbeded(dwIoBase, 0x0C, 0x17);//CR12
+    BBbWriteEmbeded(dwIoBase, 0x0D, 0xB9);//CR13
+}
+
+VOID
+BBvExitDeepSleep (DWORD_PTR dwIoBase, BYTE byLocalID)
+{
+    BBbWriteEmbeded(dwIoBase, 0x0C, 0x00);//CR12
+    BBbWriteEmbeded(dwIoBase, 0x0D, 0x01);//CR13
+}
+
+
+
+static
+ULONG
+s_ulGetRatio (PSDevice pDevice)
+{
+ULONG   ulRatio = 0;
+ULONG   ulMaxPacket;
+ULONG   ulPacketNum;
+
+    //This is a thousand-ratio
+    ulMaxPacket = pDevice->uNumSQ3[RATE_54M];
+    if ( pDevice->uNumSQ3[RATE_54M] != 0 ) {
+        ulPacketNum = pDevice->uNumSQ3[RATE_54M];
+        ulRatio = (ulPacketNum * 1000 / pDevice->uDiversityCnt);
+        //ulRatio = (pDevice->uNumSQ3[RATE_54M] * 1000 / pDevice->uDiversityCnt);
+        ulRatio += TOP_RATE_54M;
+    }
+    if ( pDevice->uNumSQ3[RATE_48M] > ulMaxPacket ) {
+        ulPacketNum = pDevice->uNumSQ3[RATE_54M] + pDevice->uNumSQ3[RATE_48M];
+        ulRatio = (ulPacketNum * 1000 / pDevice->uDiversityCnt);
+        //ulRatio = (pDevice->uNumSQ3[RATE_48M] * 1000 / pDevice->uDiversityCnt);
+        ulRatio += TOP_RATE_48M;
+        ulMaxPacket = pDevice->uNumSQ3[RATE_48M];
+    }
+    if ( pDevice->uNumSQ3[RATE_36M] > ulMaxPacket ) {
+        ulPacketNum = pDevice->uNumSQ3[RATE_54M] + pDevice->uNumSQ3[RATE_48M] +
+                      pDevice->uNumSQ3[RATE_36M];
+        ulRatio = (ulPacketNum * 1000 / pDevice->uDiversityCnt);
+        //ulRatio = (pDevice->uNumSQ3[RATE_36M] * 1000 / pDevice->uDiversityCnt);
+        ulRatio += TOP_RATE_36M;
+        ulMaxPacket = pDevice->uNumSQ3[RATE_36M];
+    }
+    if ( pDevice->uNumSQ3[RATE_24M] > ulMaxPacket ) {
+        ulPacketNum = pDevice->uNumSQ3[RATE_54M] + pDevice->uNumSQ3[RATE_48M] +
+                      pDevice->uNumSQ3[RATE_36M] + pDevice->uNumSQ3[RATE_24M];
+        ulRatio = (ulPacketNum * 1000 / pDevice->uDiversityCnt);
+        //ulRatio = (pDevice->uNumSQ3[RATE_24M] * 1000 / pDevice->uDiversityCnt);
+        ulRatio += TOP_RATE_24M;
+        ulMaxPacket = pDevice->uNumSQ3[RATE_24M];
+    }
+    if ( pDevice->uNumSQ3[RATE_18M] > ulMaxPacket ) {
+        ulPacketNum = pDevice->uNumSQ3[RATE_54M] + pDevice->uNumSQ3[RATE_48M] +
+                      pDevice->uNumSQ3[RATE_36M] + pDevice->uNumSQ3[RATE_24M] +
+                      pDevice->uNumSQ3[RATE_18M];
+        ulRatio = (ulPacketNum * 1000 / pDevice->uDiversityCnt);
+        //ulRatio = (pDevice->uNumSQ3[RATE_18M] * 1000 / pDevice->uDiversityCnt);
+        ulRatio += TOP_RATE_18M;
+        ulMaxPacket = pDevice->uNumSQ3[RATE_18M];
+    }
+    if ( pDevice->uNumSQ3[RATE_12M] > ulMaxPacket ) {
+        ulPacketNum = pDevice->uNumSQ3[RATE_54M] + pDevice->uNumSQ3[RATE_48M] +
+                      pDevice->uNumSQ3[RATE_36M] + pDevice->uNumSQ3[RATE_24M] +
+                      pDevice->uNumSQ3[RATE_18M] + pDevice->uNumSQ3[RATE_12M];
+        ulRatio = (ulPacketNum * 1000 / pDevice->uDiversityCnt);
+        //ulRatio = (pDevice->uNumSQ3[RATE_12M] * 1000 / pDevice->uDiversityCnt);
+        ulRatio += TOP_RATE_12M;
+        ulMaxPacket = pDevice->uNumSQ3[RATE_12M];
+    }
+    if ( pDevice->uNumSQ3[RATE_11M] > ulMaxPacket ) {
+        ulPacketNum = pDevice->uDiversityCnt - pDevice->uNumSQ3[RATE_1M] -
+                      pDevice->uNumSQ3[RATE_2M] - pDevice->uNumSQ3[RATE_5M] -
+                      pDevice->uNumSQ3[RATE_6M] - pDevice->uNumSQ3[RATE_9M];
+        ulRatio = (ulPacketNum * 1000 / pDevice->uDiversityCnt);
+        //ulRatio = (pDevice->uNumSQ3[RATE_11M] * 1000 / pDevice->uDiversityCnt);
+        ulRatio += TOP_RATE_11M;
+        ulMaxPacket = pDevice->uNumSQ3[RATE_11M];
+    }
+    if ( pDevice->uNumSQ3[RATE_9M] > ulMaxPacket ) {
+        ulPacketNum = pDevice->uDiversityCnt - pDevice->uNumSQ3[RATE_1M] -
+                      pDevice->uNumSQ3[RATE_2M] - pDevice->uNumSQ3[RATE_5M] -
+                      pDevice->uNumSQ3[RATE_6M];
+        ulRatio = (ulPacketNum * 1000 / pDevice->uDiversityCnt);
+        //ulRatio = (pDevice->uNumSQ3[RATE_9M] * 1000 / pDevice->uDiversityCnt);
+        ulRatio += TOP_RATE_9M;
+        ulMaxPacket = pDevice->uNumSQ3[RATE_9M];
+    }
+    if ( pDevice->uNumSQ3[RATE_6M] > ulMaxPacket ) {
+        ulPacketNum = pDevice->uDiversityCnt - pDevice->uNumSQ3[RATE_1M] -
+                      pDevice->uNumSQ3[RATE_2M] - pDevice->uNumSQ3[RATE_5M];
+        ulRatio = (ulPacketNum * 1000 / pDevice->uDiversityCnt);
+        //ulRatio = (pDevice->uNumSQ3[RATE_6M] * 1000 / pDevice->uDiversityCnt);
+        ulRatio += TOP_RATE_6M;
+        ulMaxPacket = pDevice->uNumSQ3[RATE_6M];
+    }
+    if ( pDevice->uNumSQ3[RATE_5M] > ulMaxPacket ) {
+        ulPacketNum = pDevice->uDiversityCnt - pDevice->uNumSQ3[RATE_1M] -
+                      pDevice->uNumSQ3[RATE_2M];
+        ulRatio = (ulPacketNum * 1000 / pDevice->uDiversityCnt);
+        //ulRatio = (pDevice->uNumSQ3[RATE_5M] * 1000 / pDevice->uDiversityCnt);
+        ulRatio += TOP_RATE_55M;
+        ulMaxPacket = pDevice->uNumSQ3[RATE_5M];
+    }
+    if ( pDevice->uNumSQ3[RATE_2M] > ulMaxPacket ) {
+        ulPacketNum = pDevice->uDiversityCnt - pDevice->uNumSQ3[RATE_1M];
+        ulRatio = (ulPacketNum * 1000 / pDevice->uDiversityCnt);
+        //ulRatio = (pDevice->uNumSQ3[RATE_2M]  * 1000 / pDevice->uDiversityCnt);
+        ulRatio += TOP_RATE_2M;
+        ulMaxPacket = pDevice->uNumSQ3[RATE_2M];
+    }
+    if ( pDevice->uNumSQ3[RATE_1M] > ulMaxPacket ) {
+        ulPacketNum = pDevice->uDiversityCnt;
+        ulRatio = (ulPacketNum * 1000 / pDevice->uDiversityCnt);
+        //ulRatio = (pDevice->uNumSQ3[RATE_1M]  * 1000 / pDevice->uDiversityCnt);
+        ulRatio += TOP_RATE_1M;
+    }
+
+    return ulRatio;
+}
+
+
+VOID
+BBvClearAntDivSQ3Value (PSDevice pDevice)
+{
+    UINT    ii;
+
+    pDevice->uDiversityCnt = 0;
+    for (ii = 0; ii < MAX_RATE; ii++) {
+        pDevice->uNumSQ3[ii] = 0;
+    }
+}
+
+
+/*
+ * Description: Antenna Diversity
+ *
+ * Parameters:
+ *  In:
+ *      pDevice          - Device Structure
+ *      byRSR            - RSR from received packet
+ *      bySQ3            - SQ3 value from received packet
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+
+VOID
+BBvAntennaDiversity (PSDevice pDevice, BYTE byRxRate, BYTE bySQ3)
+{
+
+    if ((byRxRate >= MAX_RATE) || (pDevice->wAntDiversityMaxRate >= MAX_RATE)) {
+        return;
+    }
+    pDevice->uDiversityCnt++;
+   // DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "pDevice->uDiversityCnt = %d\n", (int)pDevice->uDiversityCnt);
+
+    pDevice->uNumSQ3[byRxRate]++;
+
+    if (pDevice->byAntennaState == 0) {
+
+        if (pDevice->uDiversityCnt > pDevice->ulDiversityNValue) {
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ulDiversityNValue=[%d],54M-[%d]\n",
+                          (int)pDevice->ulDiversityNValue, (int)pDevice->uNumSQ3[(int)pDevice->wAntDiversityMaxRate]);
+
+            if (pDevice->uNumSQ3[pDevice->wAntDiversityMaxRate] < pDevice->uDiversityCnt/2) {
+
+                pDevice->ulRatio_State0 = s_ulGetRatio(pDevice);
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"SQ3_State0, rate = [%08x]\n", (int)pDevice->ulRatio_State0);
+
+                if ( pDevice->byTMax == 0 )
+                    return;
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"1.[%08x], uNumSQ3[%d]=%d, %d\n",
+                              (int)pDevice->ulRatio_State0, (int)pDevice->wAntDiversityMaxRate,
+                              (int)pDevice->uNumSQ3[(int)pDevice->wAntDiversityMaxRate], (int)pDevice->uDiversityCnt);
+#ifdef	PLICE_DEBUG
+		//printk("BBvAntennaDiversity1:call s_vChangeAntenna\n");
+#endif
+		s_vChangeAntenna(pDevice);
+                pDevice->byAntennaState = 1;
+                del_timer(&pDevice->TimerSQ3Tmax3);
+                del_timer(&pDevice->TimerSQ3Tmax2);
+                pDevice->TimerSQ3Tmax1.expires =  RUN_AT(pDevice->byTMax * HZ);
+                add_timer(&pDevice->TimerSQ3Tmax1);
+
+            } else {
+
+                pDevice->TimerSQ3Tmax3.expires =  RUN_AT(pDevice->byTMax3 * HZ);
+                add_timer(&pDevice->TimerSQ3Tmax3);
+            }
+            BBvClearAntDivSQ3Value(pDevice);
+
+        }
+    } else { //byAntennaState == 1
+
+        if (pDevice->uDiversityCnt > pDevice->ulDiversityMValue) {
+
+            del_timer(&pDevice->TimerSQ3Tmax1);
+
+            pDevice->ulRatio_State1 = s_ulGetRatio(pDevice);
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"RX:SQ3_State1, rate0 = %08x,rate1 = %08x\n",
+                          (int)pDevice->ulRatio_State0,(int)pDevice->ulRatio_State1);
+
+            if (pDevice->ulRatio_State1 < pDevice->ulRatio_State0) {
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"2.[%08x][%08x], uNumSQ3[%d]=%d, %d\n",
+                              (int)pDevice->ulRatio_State0, (int)pDevice->ulRatio_State1,
+                              (int)pDevice->wAntDiversityMaxRate,
+                              (int)pDevice->uNumSQ3[(int)pDevice->wAntDiversityMaxRate], (int)pDevice->uDiversityCnt);
+#ifdef	PLICE_DEBUG
+		//printk("BBvAntennaDiversity2:call s_vChangeAntenna\n");
+#endif
+				s_vChangeAntenna(pDevice);
+                pDevice->TimerSQ3Tmax3.expires =  RUN_AT(pDevice->byTMax3 * HZ);
+                pDevice->TimerSQ3Tmax2.expires =  RUN_AT(pDevice->byTMax2 * HZ);
+                add_timer(&pDevice->TimerSQ3Tmax3);
+                add_timer(&pDevice->TimerSQ3Tmax2);
+            }
+            pDevice->byAntennaState = 0;
+            BBvClearAntDivSQ3Value(pDevice);
+        }
+    } //byAntennaState
+}
+
+/*+
+ *
+ * Description:
+ *  Timer for SQ3 antenna diversity
+ *
+ * Parameters:
+ *  In:
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+-*/
+
+VOID
+TimerSQ3CallBack (
+    IN  HANDLE      hDeviceContext
+    )
+{
+    PSDevice        pDevice = (PSDevice)hDeviceContext;
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"TimerSQ3CallBack...");
+
+
+    spin_lock_irq(&pDevice->lock);
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"3.[%08x][%08x], %d\n",(int)pDevice->ulRatio_State0, (int)pDevice->ulRatio_State1, (int)pDevice->uDiversityCnt);
+#ifdef	PLICE_DEBUG
+		//printk("TimerSQ3CallBack1:call s_vChangeAntenna\n");
+#endif
+
+    s_vChangeAntenna(pDevice);
+    pDevice->byAntennaState = 0;
+    BBvClearAntDivSQ3Value(pDevice);
+
+    pDevice->TimerSQ3Tmax3.expires =  RUN_AT(pDevice->byTMax3 * HZ);
+    pDevice->TimerSQ3Tmax2.expires =  RUN_AT(pDevice->byTMax2 * HZ);
+    add_timer(&pDevice->TimerSQ3Tmax3);
+    add_timer(&pDevice->TimerSQ3Tmax2);
+
+    spin_unlock_irq(&pDevice->lock);
+
+    return;
+}
+
+
+/*+
+ *
+ * Description:
+ *  Timer for SQ3 antenna diversity
+ *
+ * Parameters:
+ *  In:
+ *      pvSysSpec1
+ *      hDeviceContext - Pointer to the adapter
+ *      pvSysSpec2
+ *      pvSysSpec3
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+-*/
+
+VOID
+TimerState1CallBack (
+    IN  HANDLE      hDeviceContext
+    )
+{
+    PSDevice        pDevice = (PSDevice)hDeviceContext;
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"TimerState1CallBack...");
+
+    spin_lock_irq(&pDevice->lock);
+    if (pDevice->uDiversityCnt < pDevice->ulDiversityMValue/100) {
+#ifdef	PLICE_DEBUG
+		//printk("TimerSQ3CallBack2:call s_vChangeAntenna\n");
+#endif
+
+		s_vChangeAntenna(pDevice);
+        pDevice->TimerSQ3Tmax3.expires =  RUN_AT(pDevice->byTMax3 * HZ);
+        pDevice->TimerSQ3Tmax2.expires =  RUN_AT(pDevice->byTMax2 * HZ);
+        add_timer(&pDevice->TimerSQ3Tmax3);
+        add_timer(&pDevice->TimerSQ3Tmax2);
+    } else {
+        pDevice->ulRatio_State1 = s_ulGetRatio(pDevice);
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"SQ3_State1, rate0 = %08x,rate1 = %08x\n",
+                      (int)pDevice->ulRatio_State0,(int)pDevice->ulRatio_State1);
+
+        if ( pDevice->ulRatio_State1 < pDevice->ulRatio_State0 ) {
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"2.[%08x][%08x], uNumSQ3[%d]=%d, %d\n",
+                          (int)pDevice->ulRatio_State0, (int)pDevice->ulRatio_State1,
+                          (int)pDevice->wAntDiversityMaxRate,
+                          (int)pDevice->uNumSQ3[(int)pDevice->wAntDiversityMaxRate], (int)pDevice->uDiversityCnt);
+#ifdef	PLICE_DEBUG
+		//printk("TimerSQ3CallBack3:call s_vChangeAntenna\n");
+#endif
+
+			s_vChangeAntenna(pDevice);
+
+            pDevice->TimerSQ3Tmax3.expires =  RUN_AT(pDevice->byTMax3 * HZ);
+            pDevice->TimerSQ3Tmax2.expires =  RUN_AT(pDevice->byTMax2 * HZ);
+            add_timer(&pDevice->TimerSQ3Tmax3);
+            add_timer(&pDevice->TimerSQ3Tmax2);
+        }
+    }
+    pDevice->byAntennaState = 0;
+    BBvClearAntDivSQ3Value(pDevice);
+    spin_unlock_irq(&pDevice->lock);
+
+    return;
+}
+
diff --git a/drivers/staging/vt6655/baseband.h b/drivers/staging/vt6655/baseband.h
new file mode 100644
index 00000000000..09cf4f961ac
--- /dev/null
+++ b/drivers/staging/vt6655/baseband.h
@@ -0,0 +1,198 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: baseband.h
+ *
+ * Purpose: Implement functions to access baseband
+ *
+ * Author: Jerry Chen
+ *
+ * Date: Jun. 5, 2002
+ *
+ */
+
+
+#ifndef __BASEBAND_H__
+#define __BASEBAND_H__
+
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+
+#if !defined(__TETHER_H__)
+#include "tether.h"
+#endif
+
+#if !defined(__DEVICE_H__)
+#include "device.h"
+#endif
+
+
+/*---------------------  Export Definitions -------------------------*/
+
+//
+// Registers in the BASEBAND
+//
+#define BB_MAX_CONTEXT_SIZE 256
+
+
+//
+// Baseband RF pair definition in eeprom (Bits 6..0)
+//
+
+/*
+#define RATE_1M         0
+#define RATE_2M         1
+#define RATE_5M         2
+#define RATE_11M        3
+#define RATE_6M         4
+#define RATE_9M         5
+#define RATE_12M        6
+#define RATE_18M        7
+#define RATE_24M        8
+#define RATE_36M        9
+#define RATE_48M       10
+#define RATE_54M       11
+#define RATE_AUTO      12
+#define MAX_RATE       12
+
+
+//0:11A 1:11B 2:11G
+#define BB_TYPE_11A    0
+#define BB_TYPE_11B    1
+#define BB_TYPE_11G    2
+
+//0:11a,1:11b,2:11gb(only CCK in BasicRate),3:11ga(OFDM in Basic Rate)
+#define PK_TYPE_11A     0
+#define PK_TYPE_11B     1
+#define PK_TYPE_11GB    2
+#define PK_TYPE_11GA    3
+*/
+
+
+#define PREAMBLE_LONG   0
+#define PREAMBLE_SHORT  1
+
+
+#define F5G             0
+#define F2_4G           1
+
+#define TOP_RATE_54M        0x80000000
+#define TOP_RATE_48M        0x40000000
+#define TOP_RATE_36M        0x20000000
+#define TOP_RATE_24M        0x10000000
+#define TOP_RATE_18M        0x08000000
+#define TOP_RATE_12M        0x04000000
+#define TOP_RATE_11M        0x02000000
+#define TOP_RATE_9M         0x01000000
+#define TOP_RATE_6M         0x00800000
+#define TOP_RATE_55M        0x00400000
+#define TOP_RATE_2M         0x00200000
+#define TOP_RATE_1M         0x00100000
+
+/*---------------------  Export Types  ------------------------------*/
+
+/*---------------------  Export Macros ------------------------------*/
+
+
+
+#define BBvClearFOE(dwIoBase)                               \
+{                                                           \
+    BBbWriteEmbeded(dwIoBase, 0xB1, 0);                     \
+}
+
+#define BBvSetFOE(dwIoBase)                                 \
+{                                                           \
+    BBbWriteEmbeded(dwIoBase, 0xB1, 0x0C);                  \
+}
+
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+#ifdef __cplusplus
+extern "C" {                            /* Assume C declarations for C++ */
+#endif /* __cplusplus */
+
+UINT
+BBuGetFrameTime(
+    IN BYTE byPreambleType,
+    IN BYTE byPktType,
+    IN UINT cbFrameLength,
+    IN WORD wRate
+    );
+
+VOID
+BBvCaculateParameter (
+    IN  PSDevice pDevice,
+    IN  UINT cbFrameLength,
+    IN  WORD wRate,
+    IN  BYTE byPacketType,
+    OUT PWORD pwPhyLen,
+    OUT PBYTE pbyPhySrv,
+    OUT PBYTE pbyPhySgn
+    );
+
+BOOL BBbReadEmbeded(DWORD_PTR dwIoBase, BYTE byBBAddr, PBYTE pbyData);
+BOOL BBbWriteEmbeded(DWORD_PTR dwIoBase, BYTE byBBAddr, BYTE byData);
+
+VOID BBvReadAllRegs(DWORD_PTR dwIoBase, PBYTE pbyBBRegs);
+void BBvLoopbackOn(PSDevice pDevice);
+void BBvLoopbackOff(PSDevice pDevice);
+void BBvSetShortSlotTime(PSDevice pDevice);
+BOOL BBbIsRegBitsOn(DWORD_PTR dwIoBase, BYTE byBBAddr, BYTE byTestBits);
+BOOL BBbIsRegBitsOff(DWORD_PTR dwIoBase, BYTE byBBAddr, BYTE byTestBits);
+VOID BBvSetVGAGainOffset(PSDevice pDevice, BYTE byData);
+
+// VT3253 Baseband
+BOOL BBbVT3253Init(PSDevice pDevice);
+VOID BBvSoftwareReset(DWORD_PTR dwIoBase);
+VOID BBvPowerSaveModeON(DWORD_PTR dwIoBase);
+VOID BBvPowerSaveModeOFF(DWORD_PTR dwIoBase);
+VOID BBvSetTxAntennaMode(DWORD_PTR dwIoBase, BYTE byAntennaMode);
+VOID BBvSetRxAntennaMode(DWORD_PTR dwIoBase, BYTE byAntennaMode);
+VOID BBvSetDeepSleep(DWORD_PTR dwIoBase, BYTE byLocalID);
+VOID BBvExitDeepSleep(DWORD_PTR dwIoBase, BYTE byLocalID);
+
+// timer for antenna diversity
+VOID
+TimerSQ3CallBack(
+    IN  HANDLE hDeviceContext
+    );
+VOID
+TimerState1CallBack(
+    IN  HANDLE hDeviceContext
+    );
+
+void BBvAntennaDiversity(PSDevice pDevice, BYTE byRxRate, BYTE bySQ3);
+VOID
+BBvClearAntDivSQ3Value (PSDevice pDevice);
+
+
+#ifdef __cplusplus
+}                /* End of extern "C" { */
+#endif /* __cplusplus */
+
+
+#endif // __BASEBAND_H__
+
+
+
diff --git a/drivers/staging/vt6655/bssdb.c b/drivers/staging/vt6655/bssdb.c
new file mode 100644
index 00000000000..746fadcffe8
--- /dev/null
+++ b/drivers/staging/vt6655/bssdb.c
@@ -0,0 +1,1786 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: bssdb.c
+ *
+ * Purpose: Handles the Basic Service Set & Node Database functions
+ *
+ * Functions:
+ *      BSSpSearchBSSList - Search known BSS list for Desire SSID or BSSID
+ *      BSSvClearBSSList - Clear BSS List
+ *      BSSbInsertToBSSList - Insert a BSS set into known BSS list
+ *      BSSbUpdateToBSSList - Update BSS set in known BSS list
+ *      BSSDBbIsSTAInNodeDB - Search Node DB table to find the index of matched DstAddr
+ *      BSSvCreateOneNode - Allocate an Node for Node DB
+ *      BSSvUpdateAPNode - Update AP Node content in Index 0 of KnownNodeDB
+ *      BSSvSecondCallBack - One second timer callback function to update Node DB info & AP link status
+ *      BSSvUpdateNodeTxCounter - Update Tx attemps, Tx failure counter in Node DB for auto-fall back rate control
+ *
+ * Revision History:
+ *
+ * Author: Lyndon Chen
+ *
+ * Date: July 17, 2002
+ *
+ */
+
+
+#if !defined(__TBIT_H__)
+#include "tbit.h"
+#endif//chester
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+#if !defined(__TMACRO_H__)
+#include "tmacro.h"
+#endif
+#if !defined(__TETHER_H__)
+#include "tether.h"
+#endif
+#if !defined(__DEVICE_H__)
+#include "device.h"
+#endif
+#if !defined(__80211HDR_H__)
+#include "80211hdr.h"
+#endif
+#if !defined(__BSSDB_H__)
+#include "bssdb.h"
+#endif
+#if !defined(__WMGR_H__)
+#include "wmgr.h"
+#endif
+#if !defined(__DATARATE_H__)
+#include "datarate.h"
+#endif
+#if !defined(__DESC_H__)
+#include "desc.h"
+#endif
+#if !defined(__WCMD_H__)
+#include "wcmd.h"
+#endif
+#if !defined(__WPA_H__)
+#include "wpa.h"
+#endif
+#if !defined(__BASEBAND_H__)
+#include "baseband.h"
+#endif
+#if !defined(__RF_H__)
+#include "rf.h"
+#endif
+#if !defined(__CARD_H__)
+#include "card.h"
+#endif
+#if !defined(__MAC_H__)
+#include "mac.h"
+#endif
+#if !defined(__WPA2_H__)
+#include "wpa2.h"
+#endif
+#if !defined(__UMEM_H__)
+#include "umem.h"
+#endif
+//DavidWang
+#if !defined(__IOWPA_H__)
+#include "iowpa.h"
+#endif
+
+//#define	PLICE_DEBUG
+/*---------------------  Static Definitions -------------------------*/
+
+
+
+
+/*---------------------  Static Classes  ----------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+static int          msglevel                =MSG_LEVEL_INFO;
+//static int          msglevel                =MSG_LEVEL_DEBUG;
+
+
+
+const WORD             awHWRetry0[5][5] = {
+                                            {RATE_18M, RATE_18M, RATE_12M, RATE_12M, RATE_12M},
+                                            {RATE_24M, RATE_24M, RATE_18M, RATE_12M, RATE_12M},
+                                            {RATE_36M, RATE_36M, RATE_24M, RATE_18M, RATE_18M},
+                                            {RATE_48M, RATE_48M, RATE_36M, RATE_24M, RATE_24M},
+                                            {RATE_54M, RATE_54M, RATE_48M, RATE_36M, RATE_36M}
+                                           };
+const WORD             awHWRetry1[5][5] = {
+                                            {RATE_18M, RATE_18M, RATE_12M, RATE_6M, RATE_6M},
+                                            {RATE_24M, RATE_24M, RATE_18M, RATE_6M, RATE_6M},
+                                            {RATE_36M, RATE_36M, RATE_24M, RATE_12M, RATE_12M},
+                                            {RATE_48M, RATE_48M, RATE_24M, RATE_12M, RATE_12M},
+                                            {RATE_54M, RATE_54M, RATE_36M, RATE_18M, RATE_18M}
+                                           };
+
+
+
+/*---------------------  Static Functions  --------------------------*/
+
+VOID s_vCheckSensitivity(
+    IN HANDLE hDeviceContext
+    );
+
+#ifdef Calcu_LinkQual
+VOID s_uCalculateLinkQual(
+    IN HANDLE hDeviceContext
+    );
+#endif
+
+
+VOID s_vCheckPreEDThreshold(
+    IN HANDLE hDeviceContext
+    );
+/*---------------------  Export Variables  --------------------------*/
+
+
+/*---------------------  Export Functions  --------------------------*/
+
+
+
+
+
+/*+
+ *
+ * Routine Description:
+ *    Search known BSS list for Desire SSID or BSSID.
+ *
+ * Return Value:
+ *    PTR to KnownBSS or NULL
+ *
+-*/
+
+PKnownBSS
+BSSpSearchBSSList(
+    IN HANDLE hDeviceContext,
+    IN PBYTE pbyDesireBSSID,
+    IN PBYTE pbyDesireSSID,
+    IN CARD_PHY_TYPE ePhyType
+    )
+{
+    PSDevice        pDevice = (PSDevice)hDeviceContext;
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+    PBYTE           pbyBSSID = NULL;
+    PWLAN_IE_SSID   pSSID = NULL;
+    PKnownBSS       pCurrBSS = NULL;
+    PKnownBSS       pSelect = NULL;
+BYTE                 ZeroBSSID[WLAN_BSSID_LEN]={0x00,0x00,0x00,0x00,0x00,0x00};
+    UINT            ii = 0;
+//    UINT            jj = 0;   //DavidWang
+    if (pbyDesireBSSID != NULL) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"BSSpSearchBSSList BSSID[%02X %02X %02X-%02X %02X %02X]\n",
+                            *pbyDesireBSSID,*(pbyDesireBSSID+1),*(pbyDesireBSSID+2),
+                            *(pbyDesireBSSID+3),*(pbyDesireBSSID+4),*(pbyDesireBSSID+5));
+        if ((!IS_BROADCAST_ADDRESS(pbyDesireBSSID)) &&
+	     (memcmp(pbyDesireBSSID, ZeroBSSID, 6)!= 0)) {
+            pbyBSSID = pbyDesireBSSID;
+        }
+    }
+    if (pbyDesireSSID != NULL) {
+        if (((PWLAN_IE_SSID)pbyDesireSSID)->len != 0) {
+            pSSID = (PWLAN_IE_SSID) pbyDesireSSID;
+        }
+    }
+
+    if (pbyBSSID != NULL) {
+        // match BSSID first
+        for (ii = 0; ii <MAX_BSS_NUM; ii++) {
+            pCurrBSS = &(pMgmt->sBSSList[ii]);
+if(pDevice->bLinkPass==FALSE) pCurrBSS->bSelected = FALSE;
+            if ((pCurrBSS->bActive) &&
+                (pCurrBSS->bSelected == FALSE)) {
+                if (IS_ETH_ADDRESS_EQUAL(pCurrBSS->abyBSSID, pbyBSSID)) {
+                    if (pSSID != NULL) {
+                        // compare ssid
+                        if (MEMEqualMemory(pSSID->abySSID,
+                            ((PWLAN_IE_SSID)pCurrBSS->abySSID)->abySSID,
+                            pSSID->len)) {
+                            if ((pMgmt->eConfigMode == WMAC_CONFIG_AUTO) ||
+                                ((pMgmt->eConfigMode == WMAC_CONFIG_IBSS_STA) && WLAN_GET_CAP_INFO_IBSS(pCurrBSS->wCapInfo)) ||
+                                ((pMgmt->eConfigMode == WMAC_CONFIG_ESS_STA) && WLAN_GET_CAP_INFO_ESS(pCurrBSS->wCapInfo))
+                                ) {
+                                pCurrBSS->bSelected = TRUE;
+                                return(pCurrBSS);
+                            }
+                        }
+                    } else {
+                        if ((pMgmt->eConfigMode == WMAC_CONFIG_AUTO) ||
+                            ((pMgmt->eConfigMode == WMAC_CONFIG_IBSS_STA) && WLAN_GET_CAP_INFO_IBSS(pCurrBSS->wCapInfo)) ||
+                            ((pMgmt->eConfigMode == WMAC_CONFIG_ESS_STA) && WLAN_GET_CAP_INFO_ESS(pCurrBSS->wCapInfo))
+                            ) {
+                            pCurrBSS->bSelected = TRUE;
+                            return(pCurrBSS);
+                        }
+                    }
+                }
+            }
+        }
+    } else {
+        // ignore BSSID
+        for (ii = 0; ii <MAX_BSS_NUM; ii++) {
+            pCurrBSS = &(pMgmt->sBSSList[ii]);
+	//2007-0721-01<Add>by MikeLiu
+	  pCurrBSS->bSelected = FALSE;
+          if (pCurrBSS->bActive) {
+
+                if (pSSID != NULL) {
+                    // matched SSID
+                    if (!MEMEqualMemory(pSSID->abySSID,
+                        ((PWLAN_IE_SSID)pCurrBSS->abySSID)->abySSID,
+                        pSSID->len) ||
+                        (pSSID->len != ((PWLAN_IE_SSID)pCurrBSS->abySSID)->len)) {
+                        // SSID not match skip this BSS
+                        continue;
+                    }
+                }
+                if (((pMgmt->eConfigMode == WMAC_CONFIG_IBSS_STA) && WLAN_GET_CAP_INFO_ESS(pCurrBSS->wCapInfo)) ||
+                    ((pMgmt->eConfigMode == WMAC_CONFIG_ESS_STA) && WLAN_GET_CAP_INFO_IBSS(pCurrBSS->wCapInfo))
+                    ) {
+                    // Type not match skip this BSS
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"BSS type mismatch.... Config[%d] BSS[0x%04x]\n", pMgmt->eConfigMode, pCurrBSS->wCapInfo);
+                    continue;
+                }
+
+                if (ePhyType != PHY_TYPE_AUTO) {
+                    if (((ePhyType == PHY_TYPE_11A) && (PHY_TYPE_11A != pCurrBSS->eNetworkTypeInUse)) ||
+                        ((ePhyType != PHY_TYPE_11A) && (PHY_TYPE_11A == pCurrBSS->eNetworkTypeInUse))) {
+                        // PhyType not match skip this BSS
+                        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Physical type mismatch.... ePhyType[%d] BSS[%d]\n", ePhyType, pCurrBSS->eNetworkTypeInUse);
+                        continue;
+                    }
+                }
+/*
+                if (pMgmt->eAuthenMode < WMAC_AUTH_WPA) {
+                    if (pCurrBSS->bWPAValid == TRUE) {
+                        // WPA AP will reject connection of station without WPA enable.
+                        continue;
+                    }
+                } else if ((pMgmt->eAuthenMode == WMAC_AUTH_WPA) ||
+                           (pMgmt->eAuthenMode == WMAC_AUTH_WPAPSK)) {
+                    if (pCurrBSS->bWPAValid == FALSE) {
+                        // station with WPA enable can't join NonWPA AP.
+                        continue;
+                    }
+                } else if ((pMgmt->eAuthenMode == WMAC_AUTH_WPA2) ||
+                           (pMgmt->eAuthenMode == WMAC_AUTH_WPA2PSK)) {
+                    if (pCurrBSS->bWPA2Valid == FALSE) {
+                        // station with WPA2 enable can't join NonWPA2 AP.
+                        continue;
+                    }
+                }
+*/
+                if (pSelect == NULL) {
+                    pSelect = pCurrBSS;
+                } else {
+                    // compare RSSI, select signal strong one
+                    if (pCurrBSS->uRSSI < pSelect->uRSSI) {
+                        pSelect = pCurrBSS;
+                    }
+                }
+            }
+        }
+        if (pSelect != NULL) {
+            pSelect->bSelected = TRUE;
+/*
+                        if (pDevice->bRoaming == FALSE)  {
+	//       Einsn Add @20070907
+			ZERO_MEMORY(pbyDesireSSID, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
+			MEMvCopy(pbyDesireSSID,pCurrBSS->abySSID,WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1) ;
+                                                }*/
+
+            return(pSelect);
+        }
+    }
+    return(NULL);
+
+}
+
+
+/*+
+ *
+ * Routine Description:
+ *    Clear BSS List
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+
+VOID
+BSSvClearBSSList(
+    IN HANDLE hDeviceContext,
+    IN BOOL bKeepCurrBSSID
+    )
+{
+    PSDevice     pDevice = (PSDevice)hDeviceContext;
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+    UINT            ii;
+
+    for (ii = 0; ii < MAX_BSS_NUM; ii++) {
+        if (bKeepCurrBSSID) {
+            if (pMgmt->sBSSList[ii].bActive &&
+                IS_ETH_ADDRESS_EQUAL(pMgmt->sBSSList[ii].abyBSSID, pMgmt->abyCurrBSSID)) {
+               // bKeepCurrBSSID = FALSE;
+                continue;
+            }
+        }
+
+        if ((pMgmt->sBSSList[ii].bActive) && (pMgmt->sBSSList[ii].uClearCount < BSS_CLEAR_COUNT)) {
+             pMgmt->sBSSList[ii].uClearCount ++;
+             continue;
+        }
+
+        pMgmt->sBSSList[ii].bActive = FALSE;
+        memset(&pMgmt->sBSSList[ii], 0, sizeof(KnownBSS));
+    }
+    BSSvClearAnyBSSJoinRecord(pDevice);
+
+    return;
+}
+
+
+
+/*+
+ *
+ * Routine Description:
+ *    search BSS list by BSSID & SSID if matched
+ *
+ * Return Value:
+ *    TRUE if found.
+ *
+-*/
+PKnownBSS
+BSSpAddrIsInBSSList(
+    IN HANDLE hDeviceContext,
+    IN PBYTE abyBSSID,
+    IN PWLAN_IE_SSID pSSID
+    )
+{
+    PSDevice     pDevice = (PSDevice)hDeviceContext;
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+    PKnownBSS       pBSSList = NULL;
+    UINT            ii;
+
+    for (ii = 0; ii < MAX_BSS_NUM; ii++) {
+        pBSSList = &(pMgmt->sBSSList[ii]);
+        if (pBSSList->bActive) {
+            if (IS_ETH_ADDRESS_EQUAL(pBSSList->abyBSSID, abyBSSID)) {
+//                if (pSSID == NULL)
+//                    return pBSSList;
+                if (pSSID->len == ((PWLAN_IE_SSID)pBSSList->abySSID)->len){
+                    if (memcmp(pSSID->abySSID,
+                            ((PWLAN_IE_SSID)pBSSList->abySSID)->abySSID,
+                            pSSID->len) == 0)
+                        return pBSSList;
+                }
+            }
+        }
+    }
+
+    return NULL;
+};
+
+
+
+
+/*+
+ *
+ * Routine Description:
+ *    Insert a BSS set into known BSS list
+ *
+ * Return Value:
+ *    TRUE if success.
+ *
+-*/
+
+BOOL
+BSSbInsertToBSSList (
+    IN HANDLE hDeviceContext,
+    IN PBYTE abyBSSIDAddr,
+    IN QWORD qwTimestamp,
+    IN WORD wBeaconInterval,
+    IN WORD wCapInfo,
+    IN BYTE byCurrChannel,
+    IN PWLAN_IE_SSID pSSID,
+    IN PWLAN_IE_SUPP_RATES pSuppRates,
+    IN PWLAN_IE_SUPP_RATES pExtSuppRates,
+    IN PERPObject psERP,
+    IN PWLAN_IE_RSN pRSN,
+    IN PWLAN_IE_RSN_EXT pRSNWPA,
+    IN PWLAN_IE_COUNTRY pIE_Country,
+    IN PWLAN_IE_QUIET pIE_Quiet,
+    IN UINT uIELength,
+    IN PBYTE pbyIEs,
+    IN HANDLE pRxPacketContext
+    )
+{
+
+    PSDevice     pDevice = (PSDevice)hDeviceContext;
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+    PSRxMgmtPacket  pRxPacket = (PSRxMgmtPacket)pRxPacketContext;
+    PKnownBSS       pBSSList = NULL;
+    UINT            ii;
+    BOOL            bParsingQuiet = FALSE;
+    PWLAN_IE_QUIET  pQuiet = NULL;
+
+
+
+    pBSSList = (PKnownBSS)&(pMgmt->sBSSList[0]);
+
+    for (ii = 0; ii < MAX_BSS_NUM; ii++) {
+        pBSSList = (PKnownBSS)&(pMgmt->sBSSList[ii]);
+        if (!pBSSList->bActive)
+                break;
+    }
+
+    if (ii == MAX_BSS_NUM){
+        DEVICE_PRT(MSG_LEVEL_NOTICE, KERN_INFO "Get free KnowBSS node failed.\n");
+        return FALSE;
+    }
+    // save the BSS info
+    pBSSList->bActive = TRUE;
+    memcpy( pBSSList->abyBSSID, abyBSSIDAddr, WLAN_BSSID_LEN);
+    HIDWORD(pBSSList->qwBSSTimestamp) = cpu_to_le32(HIDWORD(qwTimestamp));
+    LODWORD(pBSSList->qwBSSTimestamp) = cpu_to_le32(LODWORD(qwTimestamp));
+    pBSSList->wBeaconInterval = cpu_to_le16(wBeaconInterval);
+    pBSSList->wCapInfo = cpu_to_le16(wCapInfo);
+    pBSSList->uClearCount = 0;
+
+    if (pSSID->len > WLAN_SSID_MAXLEN)
+        pSSID->len = WLAN_SSID_MAXLEN;
+    memcpy( pBSSList->abySSID, pSSID, pSSID->len + WLAN_IEHDR_LEN);
+
+    pBSSList->uChannel = byCurrChannel;
+
+    if (pSuppRates->len > WLAN_RATES_MAXLEN)
+        pSuppRates->len = WLAN_RATES_MAXLEN;
+    memcpy( pBSSList->abySuppRates, pSuppRates, pSuppRates->len + WLAN_IEHDR_LEN);
+
+    if (pExtSuppRates != NULL) {
+        if (pExtSuppRates->len > WLAN_RATES_MAXLEN)
+            pExtSuppRates->len = WLAN_RATES_MAXLEN;
+        memcpy(pBSSList->abyExtSuppRates, pExtSuppRates, pExtSuppRates->len + WLAN_IEHDR_LEN);
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"BSSbInsertToBSSList: pExtSuppRates->len = %d\n", pExtSuppRates->len);
+
+    } else {
+        memset(pBSSList->abyExtSuppRates, 0, WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1);
+    }
+    pBSSList->sERP.byERP = psERP->byERP;
+    pBSSList->sERP.bERPExist = psERP->bERPExist;
+
+    // Check if BSS is 802.11a/b/g
+    if (pBSSList->uChannel > CB_MAX_CHANNEL_24G) {
+        pBSSList->eNetworkTypeInUse = PHY_TYPE_11A;
+    } else {
+        if (pBSSList->sERP.bERPExist == TRUE) {
+            pBSSList->eNetworkTypeInUse = PHY_TYPE_11G;
+        } else {
+            pBSSList->eNetworkTypeInUse = PHY_TYPE_11B;
+        }
+    }
+
+    pBSSList->byRxRate = pRxPacket->byRxRate;
+    pBSSList->qwLocalTSF = pRxPacket->qwLocalTSF;
+    pBSSList->uRSSI = pRxPacket->uRSSI;
+    pBSSList->bySQ = pRxPacket->bySQ;
+
+   if ((pMgmt->eCurrMode == WMAC_MODE_ESS_STA) &&
+        (pMgmt->eCurrState == WMAC_STATE_ASSOC)) {
+        // assoc with BSS
+        if (pBSSList == pMgmt->pCurrBSS) {
+            bParsingQuiet = TRUE;
+        }
+    }
+
+    WPA_ClearRSN(pBSSList);
+
+    if (pRSNWPA != NULL) {
+        UINT uLen = pRSNWPA->len + 2;
+
+        if (uLen <= (uIELength - (UINT)(ULONG_PTR)((PBYTE)pRSNWPA - pbyIEs))) {
+            pBSSList->wWPALen = uLen;
+            memcpy(pBSSList->byWPAIE, pRSNWPA, uLen);
+            WPA_ParseRSN(pBSSList, pRSNWPA);
+        }
+    }
+
+    WPA2_ClearRSN(pBSSList);
+
+    if (pRSN != NULL) {
+        UINT uLen = pRSN->len + 2;
+        if (uLen <= (uIELength - (UINT)(ULONG_PTR)((PBYTE)pRSN - pbyIEs))) {
+            pBSSList->wRSNLen = uLen;
+            memcpy(pBSSList->byRSNIE, pRSN, uLen);
+            WPA2vParseRSN(pBSSList, pRSN);
+        }
+    }
+
+    if ((pMgmt->eAuthenMode == WMAC_AUTH_WPA2) || (pBSSList->bWPA2Valid == TRUE)) {
+
+        PSKeyItem  pTransmitKey = NULL;
+        BOOL       bIs802_1x = FALSE;
+
+        for (ii = 0; ii < pBSSList->wAKMSSAuthCount; ii ++) {
+            if (pBSSList->abyAKMSSAuthType[ii] == WLAN_11i_AKMSS_802_1X) {
+                bIs802_1x = TRUE;
+                break;
+            }
+        }
+        if ((bIs802_1x == TRUE) && (pSSID->len == ((PWLAN_IE_SSID)pMgmt->abyDesireSSID)->len) &&
+            (MEMEqualMemory(pSSID->abySSID, ((PWLAN_IE_SSID)pMgmt->abyDesireSSID)->abySSID, pSSID->len))) {
+
+            bAdd_PMKID_Candidate((HANDLE)pDevice, pBSSList->abyBSSID, &pBSSList->sRSNCapObj);
+
+            if ((pDevice->bLinkPass == TRUE) && (pMgmt->eCurrState == WMAC_STATE_ASSOC)) {
+                if ((KeybGetTransmitKey(&(pDevice->sKey), pDevice->abyBSSID, PAIRWISE_KEY, &pTransmitKey) == TRUE) ||
+                    (KeybGetTransmitKey(&(pDevice->sKey), pDevice->abyBSSID, GROUP_KEY, &pTransmitKey) == TRUE)) {
+                    pDevice->gsPMKIDCandidate.StatusType = Ndis802_11StatusType_PMKID_CandidateList;
+                    pDevice->gsPMKIDCandidate.Version = 1;
+
+                }
+
+            }
+        }
+    }
+
+    if (pDevice->bUpdateBBVGA) {
+        // Moniter if RSSI is too strong.
+        pBSSList->byRSSIStatCnt = 0;
+        RFvRSSITodBm(pDevice, (BYTE)(pRxPacket->uRSSI), &pBSSList->ldBmMAX);
+        pBSSList->ldBmAverage[0] = pBSSList->ldBmMAX;
+        for (ii = 1; ii < RSSI_STAT_COUNT; ii++)
+            pBSSList->ldBmAverage[ii] = 0;
+    }
+
+    if ((pIE_Country != NULL) &&
+        (pMgmt->b11hEnable == TRUE)) {
+        CARDvSetCountryInfo(pMgmt->pAdapter,
+                            pBSSList->eNetworkTypeInUse,
+                            pIE_Country);
+    }
+
+
+
+    if ((bParsingQuiet == TRUE) && (pIE_Quiet != NULL)) {
+        if ((((PWLAN_IE_QUIET)pIE_Quiet)->len == 8) &&
+            (((PWLAN_IE_QUIET)pIE_Quiet)->byQuietCount != 0)) {
+            // valid EID
+            if (pQuiet == NULL) {
+                pQuiet = (PWLAN_IE_QUIET)pIE_Quiet;
+                CARDbSetQuiet(  pMgmt->pAdapter,
+                                TRUE,
+                                pQuiet->byQuietCount,
+                                pQuiet->byQuietPeriod,
+                                *((PWORD)pQuiet->abyQuietDuration),
+                                *((PWORD)pQuiet->abyQuietOffset)
+                                );
+            } else {
+                pQuiet = (PWLAN_IE_QUIET)pIE_Quiet;
+                CARDbSetQuiet(  pMgmt->pAdapter,
+                                FALSE,
+                                pQuiet->byQuietCount,
+                                pQuiet->byQuietPeriod,
+                                *((PWORD)pQuiet->abyQuietDuration),
+                                *((PWORD)pQuiet->abyQuietOffset)
+                                );
+            }
+        }
+    }
+
+    if ((bParsingQuiet == TRUE) &&
+        (pQuiet != NULL)) {
+        CARDbStartQuiet(pMgmt->pAdapter);
+    }
+
+    pBSSList->uIELength = uIELength;
+    if (pBSSList->uIELength > WLAN_BEACON_FR_MAXLEN)
+        pBSSList->uIELength = WLAN_BEACON_FR_MAXLEN;
+    MEMvCopy(pBSSList->abyIEs, pbyIEs, pBSSList->uIELength);
+
+    return TRUE;
+}
+
+
+/*+
+ *
+ * Routine Description:
+ *    Update BSS set in known BSS list
+ *
+ * Return Value:
+ *    TRUE if success.
+ *
+-*/
+// TODO: input structure modify
+
+BOOL
+BSSbUpdateToBSSList (
+    IN HANDLE hDeviceContext,
+    IN QWORD qwTimestamp,
+    IN WORD wBeaconInterval,
+    IN WORD wCapInfo,
+    IN BYTE byCurrChannel,
+    IN BOOL bChannelHit,
+    IN PWLAN_IE_SSID pSSID,
+    IN PWLAN_IE_SUPP_RATES pSuppRates,
+    IN PWLAN_IE_SUPP_RATES pExtSuppRates,
+    IN PERPObject psERP,
+    IN PWLAN_IE_RSN pRSN,
+    IN PWLAN_IE_RSN_EXT pRSNWPA,
+    IN PWLAN_IE_COUNTRY pIE_Country,
+    IN PWLAN_IE_QUIET pIE_Quiet,
+    IN PKnownBSS pBSSList,
+    IN UINT uIELength,
+    IN PBYTE pbyIEs,
+    IN HANDLE pRxPacketContext
+    )
+{
+    int             ii;
+    PSDevice        pDevice = (PSDevice)hDeviceContext;
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+    PSRxMgmtPacket  pRxPacket = (PSRxMgmtPacket)pRxPacketContext;
+    LONG            ldBm;
+    BOOL            bParsingQuiet = FALSE;
+    PWLAN_IE_QUIET  pQuiet = NULL;
+
+
+
+    if (pBSSList == NULL)
+        return FALSE;
+
+    HIDWORD(pBSSList->qwBSSTimestamp) = cpu_to_le32(HIDWORD(qwTimestamp));
+    LODWORD(pBSSList->qwBSSTimestamp) = cpu_to_le32(LODWORD(qwTimestamp));
+    pBSSList->wBeaconInterval = cpu_to_le16(wBeaconInterval);
+    pBSSList->wCapInfo = cpu_to_le16(wCapInfo);
+    pBSSList->uClearCount = 0;
+    pBSSList->uChannel = byCurrChannel;
+//    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"BSSbUpdateToBSSList: pBSSList->uChannel: %d\n", pBSSList->uChannel);
+
+    if (pSSID->len > WLAN_SSID_MAXLEN)
+        pSSID->len = WLAN_SSID_MAXLEN;
+
+    if ((pSSID->len != 0) && (pSSID->abySSID[0] != 0))
+        memcpy(pBSSList->abySSID, pSSID, pSSID->len + WLAN_IEHDR_LEN);
+    memcpy(pBSSList->abySuppRates, pSuppRates,pSuppRates->len + WLAN_IEHDR_LEN);
+
+    if (pExtSuppRates != NULL) {
+        memcpy(pBSSList->abyExtSuppRates, pExtSuppRates,pExtSuppRates->len + WLAN_IEHDR_LEN);
+    } else {
+        memset(pBSSList->abyExtSuppRates, 0, WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1);
+    }
+    pBSSList->sERP.byERP = psERP->byERP;
+    pBSSList->sERP.bERPExist = psERP->bERPExist;
+
+    // Check if BSS is 802.11a/b/g
+    if (pBSSList->uChannel > CB_MAX_CHANNEL_24G) {
+        pBSSList->eNetworkTypeInUse = PHY_TYPE_11A;
+    } else {
+        if (pBSSList->sERP.bERPExist == TRUE) {
+            pBSSList->eNetworkTypeInUse = PHY_TYPE_11G;
+        } else {
+            pBSSList->eNetworkTypeInUse = PHY_TYPE_11B;
+        }
+    }
+
+    pBSSList->byRxRate = pRxPacket->byRxRate;
+    pBSSList->qwLocalTSF = pRxPacket->qwLocalTSF;
+    if(bChannelHit)
+        pBSSList->uRSSI = pRxPacket->uRSSI;
+    pBSSList->bySQ = pRxPacket->bySQ;
+
+   if ((pMgmt->eCurrMode == WMAC_MODE_ESS_STA) &&
+        (pMgmt->eCurrState == WMAC_STATE_ASSOC)) {
+        // assoc with BSS
+        if (pBSSList == pMgmt->pCurrBSS) {
+            bParsingQuiet = TRUE;
+        }
+    }
+
+    WPA_ClearRSN(pBSSList);         //mike update
+
+    if (pRSNWPA != NULL) {
+        UINT uLen = pRSNWPA->len + 2;
+        if (uLen <= (uIELength - (UINT)(ULONG_PTR)((PBYTE)pRSNWPA - pbyIEs))) {
+            pBSSList->wWPALen = uLen;
+            memcpy(pBSSList->byWPAIE, pRSNWPA, uLen);
+            WPA_ParseRSN(pBSSList, pRSNWPA);
+        }
+    }
+
+  WPA2_ClearRSN(pBSSList);  //mike update
+
+    if (pRSN != NULL) {
+        UINT uLen = pRSN->len + 2;
+        if (uLen <= (uIELength - (UINT)(ULONG_PTR)((PBYTE)pRSN - pbyIEs))) {
+            pBSSList->wRSNLen = uLen;
+            memcpy(pBSSList->byRSNIE, pRSN, uLen);
+            WPA2vParseRSN(pBSSList, pRSN);
+        }
+    }
+
+    if (pRxPacket->uRSSI != 0) {
+        RFvRSSITodBm(pDevice, (BYTE)(pRxPacket->uRSSI), &ldBm);
+        // Moniter if RSSI is too strong.
+        pBSSList->byRSSIStatCnt++;
+        pBSSList->byRSSIStatCnt %= RSSI_STAT_COUNT;
+        pBSSList->ldBmAverage[pBSSList->byRSSIStatCnt] = ldBm;
+        for(ii=0;ii<RSSI_STAT_COUNT;ii++) {
+            if (pBSSList->ldBmAverage[ii] != 0) {
+                pBSSList->ldBmMAX = max(pBSSList->ldBmAverage[ii], ldBm);
+            }
+        }
+    }
+
+    if ((pIE_Country != NULL) &&
+        (pMgmt->b11hEnable == TRUE)) {
+        CARDvSetCountryInfo(pMgmt->pAdapter,
+                            pBSSList->eNetworkTypeInUse,
+                            pIE_Country);
+    }
+
+    if ((bParsingQuiet == TRUE) && (pIE_Quiet != NULL)) {
+        if ((((PWLAN_IE_QUIET)pIE_Quiet)->len == 8) &&
+            (((PWLAN_IE_QUIET)pIE_Quiet)->byQuietCount != 0)) {
+            // valid EID
+            if (pQuiet == NULL) {
+                pQuiet = (PWLAN_IE_QUIET)pIE_Quiet;
+                CARDbSetQuiet(  pMgmt->pAdapter,
+                                TRUE,
+                                pQuiet->byQuietCount,
+                                pQuiet->byQuietPeriod,
+                                *((PWORD)pQuiet->abyQuietDuration),
+                                *((PWORD)pQuiet->abyQuietOffset)
+                                );
+            } else {
+                pQuiet = (PWLAN_IE_QUIET)pIE_Quiet;
+                CARDbSetQuiet(  pMgmt->pAdapter,
+                                FALSE,
+                                pQuiet->byQuietCount,
+                                pQuiet->byQuietPeriod,
+                                *((PWORD)pQuiet->abyQuietDuration),
+                                *((PWORD)pQuiet->abyQuietOffset)
+                                );
+            }
+        }
+    }
+
+    if ((bParsingQuiet == TRUE) &&
+        (pQuiet != NULL)) {
+        CARDbStartQuiet(pMgmt->pAdapter);
+    }
+
+    pBSSList->uIELength = uIELength;
+    if (pBSSList->uIELength > WLAN_BEACON_FR_MAXLEN)
+        pBSSList->uIELength = WLAN_BEACON_FR_MAXLEN;
+    memcpy(pBSSList->abyIEs, pbyIEs, pBSSList->uIELength);
+
+    return TRUE;
+}
+
+
+
+
+
+/*+
+ *
+ * Routine Description:
+ *    Search Node DB table to find the index of matched DstAddr
+ *
+ * Return Value:
+ *    None
+ *
+-*/
+
+BOOL
+BSSDBbIsSTAInNodeDB(
+    IN PVOID pMgmtObject,
+    IN PBYTE abyDstAddr,
+    OUT PUINT puNodeIndex
+    )
+{
+    PSMgmtObject    pMgmt = (PSMgmtObject) pMgmtObject;
+    UINT            ii;
+
+    // Index = 0 reserved for AP Node
+    for (ii = 1; ii < (MAX_NODE_NUM + 1); ii++) {
+        if (pMgmt->sNodeDBTable[ii].bActive) {
+            if (IS_ETH_ADDRESS_EQUAL(abyDstAddr, pMgmt->sNodeDBTable[ii].abyMACAddr)) {
+                *puNodeIndex = ii;
+                return TRUE;
+            }
+        }
+    }
+
+   return FALSE;
+};
+
+
+
+/*+
+ *
+ * Routine Description:
+ *    Find an empty node and allocated; if no empty found,
+ *    instand used of most inactive one.
+ *
+ * Return Value:
+ *    None
+ *
+-*/
+VOID
+BSSvCreateOneNode(
+    IN HANDLE hDeviceContext,
+    OUT PUINT puNodeIndex
+    )
+{
+
+    PSDevice     pDevice = (PSDevice)hDeviceContext;
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+    UINT            ii;
+    UINT            BigestCount = 0;
+    UINT            SelectIndex;
+    struct sk_buff  *skb;
+    // Index = 0 reserved for AP Node (In STA mode)
+    // Index = 0 reserved for Broadcast/MultiCast (In AP mode)
+    SelectIndex = 1;
+    for (ii = 1; ii < (MAX_NODE_NUM + 1); ii++) {
+        if (pMgmt->sNodeDBTable[ii].bActive) {
+            if (pMgmt->sNodeDBTable[ii].uInActiveCount > BigestCount) {
+                BigestCount = pMgmt->sNodeDBTable[ii].uInActiveCount;
+                SelectIndex = ii;
+            }
+        }
+        else {
+            break;
+        }
+    }
+
+    // if not found replace uInActiveCount is largest one.
+    if ( ii == (MAX_NODE_NUM + 1)) {
+        *puNodeIndex = SelectIndex;
+        DEVICE_PRT(MSG_LEVEL_NOTICE, KERN_INFO "Replace inactive node = %d\n", SelectIndex);
+        // clear ps buffer
+        if (pMgmt->sNodeDBTable[*puNodeIndex].sTxPSQueue.next != NULL) {
+      	    while ((skb = skb_dequeue(&pMgmt->sNodeDBTable[*puNodeIndex].sTxPSQueue)) != NULL)
+            dev_kfree_skb(skb);
+        }
+    }
+    else {
+        *puNodeIndex = ii;
+    }
+
+    memset(&pMgmt->sNodeDBTable[*puNodeIndex], 0, sizeof(KnownNodeDB));
+    pMgmt->sNodeDBTable[*puNodeIndex].bActive = TRUE;
+    pMgmt->sNodeDBTable[*puNodeIndex].uRatePollTimeout = FALLBACK_POLL_SECOND;
+    // for AP mode PS queue
+    skb_queue_head_init(&pMgmt->sNodeDBTable[*puNodeIndex].sTxPSQueue);
+    pMgmt->sNodeDBTable[*puNodeIndex].byAuthSequence = 0;
+    pMgmt->sNodeDBTable[*puNodeIndex].wEnQueueCnt = 0;
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Create node index = %d\n", ii);
+    return;
+};
+
+
+
+/*+
+ *
+ * Routine Description:
+ *    Remove Node by NodeIndex
+ *
+ *
+ * Return Value:
+ *    None
+ *
+-*/
+VOID
+BSSvRemoveOneNode(
+    IN HANDLE hDeviceContext,
+    IN UINT uNodeIndex
+    )
+{
+
+    PSDevice        pDevice = (PSDevice)hDeviceContext;
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+    BYTE            byMask[8] = {1, 2, 4, 8, 0x10, 0x20, 0x40, 0x80};
+    struct sk_buff  *skb;
+
+
+    while ((skb = skb_dequeue(&pMgmt->sNodeDBTable[uNodeIndex].sTxPSQueue)) != NULL)
+            dev_kfree_skb(skb);
+    // clear context
+    memset(&pMgmt->sNodeDBTable[uNodeIndex], 0, sizeof(KnownNodeDB));
+    // clear tx bit map
+    pMgmt->abyPSTxMap[pMgmt->sNodeDBTable[uNodeIndex].wAID >> 3] &=  ~byMask[pMgmt->sNodeDBTable[uNodeIndex].wAID & 7];
+
+    return;
+};
+/*+
+ *
+ * Routine Description:
+ *    Update AP Node content in Index 0 of KnownNodeDB
+ *
+ *
+ * Return Value:
+ *    None
+ *
+-*/
+
+VOID
+BSSvUpdateAPNode(
+    IN HANDLE hDeviceContext,
+    IN PWORD pwCapInfo,
+    IN PWLAN_IE_SUPP_RATES pSuppRates,
+    IN PWLAN_IE_SUPP_RATES pExtSuppRates
+    )
+{
+    PSDevice     pDevice = (PSDevice)hDeviceContext;
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+    UINT            uRateLen = WLAN_RATES_MAXLEN;
+
+    memset(&pMgmt->sNodeDBTable[0], 0, sizeof(KnownNodeDB));
+
+    pMgmt->sNodeDBTable[0].bActive = TRUE;
+    if (pDevice->eCurrentPHYType == PHY_TYPE_11B) {
+        uRateLen = WLAN_RATES_MAXLEN_11B;
+    }
+    pMgmt->abyCurrSuppRates[1] = RATEuSetIE((PWLAN_IE_SUPP_RATES)pSuppRates,
+                                            (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
+                                            uRateLen);
+    pMgmt->abyCurrExtSuppRates[1] = RATEuSetIE((PWLAN_IE_SUPP_RATES)pExtSuppRates,
+                                            (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrExtSuppRates,
+                                            uRateLen);
+    RATEvParseMaxRate((PVOID) pDevice,
+                       (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
+                       (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrExtSuppRates,
+                       TRUE,
+                       &(pMgmt->sNodeDBTable[0].wMaxBasicRate),
+                       &(pMgmt->sNodeDBTable[0].wMaxSuppRate),
+                       &(pMgmt->sNodeDBTable[0].wSuppRate),
+                       &(pMgmt->sNodeDBTable[0].byTopCCKBasicRate),
+                       &(pMgmt->sNodeDBTable[0].byTopOFDMBasicRate)
+                      );
+    memcpy(pMgmt->sNodeDBTable[0].abyMACAddr, pMgmt->abyCurrBSSID, WLAN_ADDR_LEN);
+    pMgmt->sNodeDBTable[0].wTxDataRate = pMgmt->sNodeDBTable[0].wMaxSuppRate;
+    pMgmt->sNodeDBTable[0].bShortPreamble = WLAN_GET_CAP_INFO_SHORTPREAMBLE(*pwCapInfo);
+    pMgmt->sNodeDBTable[0].uRatePollTimeout = FALLBACK_POLL_SECOND;
+#ifdef	PLICE_DEBUG
+	printk("BSSvUpdateAPNode:MaxSuppRate is %d\n",pMgmt->sNodeDBTable[0].wMaxSuppRate);
+#endif
+    // Auto rate fallback function initiation.
+    // RATEbInit(pDevice);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pMgmt->sNodeDBTable[0].wTxDataRate = %d \n", pMgmt->sNodeDBTable[0].wTxDataRate);
+
+};
+
+
+
+
+
+/*+
+ *
+ * Routine Description:
+ *    Add Multicast Node content in Index 0 of KnownNodeDB
+ *
+ *
+ * Return Value:
+ *    None
+ *
+-*/
+
+
+VOID
+BSSvAddMulticastNode(
+    IN HANDLE hDeviceContext
+    )
+{
+    PSDevice     pDevice = (PSDevice)hDeviceContext;
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+
+    if (!pDevice->bEnableHostWEP)
+        memset(&pMgmt->sNodeDBTable[0], 0, sizeof(KnownNodeDB));
+    memset(pMgmt->sNodeDBTable[0].abyMACAddr, 0xff, WLAN_ADDR_LEN);
+    pMgmt->sNodeDBTable[0].bActive = TRUE;
+    pMgmt->sNodeDBTable[0].bPSEnable = FALSE;
+    skb_queue_head_init(&pMgmt->sNodeDBTable[0].sTxPSQueue);
+    RATEvParseMaxRate((PVOID) pDevice,
+                      (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
+                      (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrExtSuppRates,
+                      TRUE,
+                      &(pMgmt->sNodeDBTable[0].wMaxBasicRate),
+                      &(pMgmt->sNodeDBTable[0].wMaxSuppRate),
+                       &(pMgmt->sNodeDBTable[0].wSuppRate),
+                      &(pMgmt->sNodeDBTable[0].byTopCCKBasicRate),
+                      &(pMgmt->sNodeDBTable[0].byTopOFDMBasicRate)
+                     );
+    pMgmt->sNodeDBTable[0].wTxDataRate = pMgmt->sNodeDBTable[0].wMaxBasicRate;
+#ifdef	PLICE_DEBUG
+	printk("BSSvAddMultiCastNode:pMgmt->sNodeDBTable[0].wTxDataRate is %d\n",pMgmt->sNodeDBTable[0].wTxDataRate);
+#endif
+    pMgmt->sNodeDBTable[0].uRatePollTimeout = FALLBACK_POLL_SECOND;
+
+};
+
+
+
+
+
+/*+
+ *
+ * Routine Description:
+ *
+ *
+ *  Second call back function to update Node DB info & AP link status
+ *
+ *
+ * Return Value:
+ *    none.
+ *
+-*/
+ //2008-4-14 <add> by chester for led issue
+ #ifdef FOR_LED_ON_NOTEBOOK
+BOOL cc=FALSE;
+UINT status;
+#endif
+VOID
+BSSvSecondCallBack(
+    IN  HANDLE hDeviceContext
+    )
+{
+    PSDevice        pDevice = (PSDevice)hDeviceContext;
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+    UINT            ii;
+    PWLAN_IE_SSID   pItemSSID, pCurrSSID;
+    UINT            uSleepySTACnt = 0;
+    UINT            uNonShortSlotSTACnt = 0;
+    UINT            uLongPreambleSTACnt = 0;
+viawget_wpa_header* wpahdr;
+
+    spin_lock_irq(&pDevice->lock);
+
+    pDevice->uAssocCount = 0;
+
+    pDevice->byERPFlag &=
+        ~(WLAN_SET_ERP_BARKER_MODE(1) | WLAN_SET_ERP_NONERP_PRESENT(1));
+ //2008-4-14 <add> by chester for led issue
+#ifdef FOR_LED_ON_NOTEBOOK
+MACvGPIOIn(pDevice->PortOffset, &pDevice->byGPIO);
+if (((BITbIsBitOff(pDevice->byGPIO,GPIO0_DATA)&&(pDevice->bHWRadioOff == FALSE))||(BITbIsBitOn(pDevice->byGPIO,GPIO0_DATA)&&(pDevice->bHWRadioOff == TRUE)))&&(cc==FALSE)){
+cc=TRUE;
+}
+else if(cc==TRUE){
+
+if(pDevice->bHWRadioOff == TRUE){
+            if (BITbIsBitOff(pDevice->byGPIO,GPIO0_DATA))
+//||(BITbIsBitOff(pDevice->byGPIO,GPIO0_DATA) && BITbIsBitOn(pDevice->byRadioCtl, EEP_RADIOCTL_INV)))
+{if(status==1) goto start;
+status=1;
+CARDbRadioPowerOff(pDevice);
+                pMgmt->sNodeDBTable[0].bActive = FALSE;
+                pMgmt->eCurrMode = WMAC_MODE_STANDBY;
+                pMgmt->eCurrState = WMAC_STATE_IDLE;
+                //netif_stop_queue(pDevice->dev);
+                pDevice->bLinkPass = FALSE;
+
+}
+  if (BITbIsBitOn(pDevice->byGPIO,GPIO0_DATA))
+//||(BITbIsBitOff(pDevice->byGPIO,GPIO0_DATA) && BITbIsBitOn(pDevice->byRadioCtl, EEP_RADIOCTL_INV)))
+{if(status==2) goto start;
+status=2;
+CARDbRadioPowerOn(pDevice);
+} }
+else{
+            if (BITbIsBitOn(pDevice->byGPIO,GPIO0_DATA))
+//||(BITbIsBitOff(pDevice->byGPIO,GPIO0_DATA) && BITbIsBitOn(pDevice->byRadioCtl, EEP_RADIOCTL_INV)))
+{if(status==3) goto start;
+status=3;
+CARDbRadioPowerOff(pDevice);
+                pMgmt->sNodeDBTable[0].bActive = FALSE;
+                pMgmt->eCurrMode = WMAC_MODE_STANDBY;
+                pMgmt->eCurrState = WMAC_STATE_IDLE;
+                //netif_stop_queue(pDevice->dev);
+                pDevice->bLinkPass = FALSE;
+
+}
+  if (BITbIsBitOff(pDevice->byGPIO,GPIO0_DATA))
+//||(BITbIsBitOff(pDevice->byGPIO,GPIO0_DATA) && BITbIsBitOn(pDevice->byRadioCtl, EEP_RADIOCTL_INV)))
+{if(status==4) goto start;
+status=4;
+CARDbRadioPowerOn(pDevice);
+} }
+}
+start:
+#endif
+
+
+    if (pDevice->wUseProtectCntDown > 0) {
+        pDevice->wUseProtectCntDown --;
+    }
+    else {
+        // disable protect mode
+        pDevice->byERPFlag &= ~(WLAN_SET_ERP_USE_PROTECTION(1));
+    }
+
+{
+       pDevice->byReAssocCount++;
+   if((pDevice->byReAssocCount > 10) && (pDevice->bLinkPass != TRUE)) {  //10 sec timeout
+                     printk("Re-association timeout!!!\n");
+		   pDevice->byReAssocCount = 0;
+                     #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+                    // if(pDevice->bWPASuppWextEnabled == TRUE)
+                        {
+                  	union iwreq_data  wrqu;
+                  	memset(&wrqu, 0, sizeof (wrqu));
+                          wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+                  	printk("wireless_send_event--->SIOCGIWAP(disassociated)\n");
+                  	wireless_send_event(pDevice->dev, SIOCGIWAP, &wrqu, NULL);
+                       }
+                    #endif
+     }
+   else if(pDevice->bLinkPass == TRUE)
+   	pDevice->byReAssocCount = 0;
+}
+
+#ifdef Calcu_LinkQual
+   s_uCalculateLinkQual((HANDLE)pDevice);
+#endif
+
+    for (ii = 0; ii < (MAX_NODE_NUM + 1); ii++) {
+
+        if (pMgmt->sNodeDBTable[ii].bActive) {
+
+            // Increase in-activity counter
+            pMgmt->sNodeDBTable[ii].uInActiveCount++;
+
+            if (ii > 0) {
+                if (pMgmt->sNodeDBTable[ii].uInActiveCount > MAX_INACTIVE_COUNT) {
+                    BSSvRemoveOneNode(pDevice, ii);
+                    DEVICE_PRT(MSG_LEVEL_NOTICE, KERN_INFO
+                        "Inactive timeout [%d] sec, STA index = [%d] remove\n", MAX_INACTIVE_COUNT, ii);
+                    continue;
+                }
+
+                if (pMgmt->sNodeDBTable[ii].eNodeState >= NODE_ASSOC) {
+
+                    pDevice->uAssocCount++;
+
+                    // check if Non ERP exist
+                    if (pMgmt->sNodeDBTable[ii].uInActiveCount < ERP_RECOVER_COUNT) {
+                        if (!pMgmt->sNodeDBTable[ii].bShortPreamble) {
+                            pDevice->byERPFlag |= WLAN_SET_ERP_BARKER_MODE(1);
+                            uLongPreambleSTACnt ++;
+                        }
+                        if (!pMgmt->sNodeDBTable[ii].bERPExist) {
+                            pDevice->byERPFlag |= WLAN_SET_ERP_NONERP_PRESENT(1);
+                            pDevice->byERPFlag |= WLAN_SET_ERP_USE_PROTECTION(1);
+                        }
+                        if (!pMgmt->sNodeDBTable[ii].bShortSlotTime)
+                            uNonShortSlotSTACnt++;
+                    }
+                }
+
+                // check if any STA in PS mode
+                if (pMgmt->sNodeDBTable[ii].bPSEnable)
+                    uSleepySTACnt++;
+
+
+            }
+
+            // Rate fallback check
+
+            if (!pDevice->bFixRate) {
+/*
+                if ((pMgmt->eCurrMode == WMAC_MODE_ESS_STA) && (ii == 0))
+                    RATEvTxRateFallBack(pDevice, &(pMgmt->sNodeDBTable[ii]));
+*/
+                if (ii > 0) {
+                    // ii = 0 for multicast node (AP & Adhoc)
+                    RATEvTxRateFallBack((PVOID)pDevice, &(pMgmt->sNodeDBTable[ii]));
+                }
+                else {
+                    // ii = 0 reserved for unicast AP node (Infra STA)
+                    if (pMgmt->eCurrMode == WMAC_MODE_ESS_STA)
+#ifdef	PLICE_DEBUG
+		printk("SecondCallback:Before:TxDataRate is %d\n",pMgmt->sNodeDBTable[0].wTxDataRate);
+#endif
+                        RATEvTxRateFallBack((PVOID)pDevice, &(pMgmt->sNodeDBTable[ii]));
+#ifdef	PLICE_DEBUG
+		printk("SecondCallback:After:TxDataRate is %d\n",pMgmt->sNodeDBTable[0].wTxDataRate);
+#endif
+
+		}
+
+            }
+
+            // check if pending PS queue
+            if (pMgmt->sNodeDBTable[ii].wEnQueueCnt != 0) {
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Index= %d, Queue = %d pending \n",
+                           ii, pMgmt->sNodeDBTable[ii].wEnQueueCnt);
+                if ((ii >0) && (pMgmt->sNodeDBTable[ii].wEnQueueCnt > 15)) {
+                    BSSvRemoveOneNode(pDevice, ii);
+                    DEVICE_PRT(MSG_LEVEL_NOTICE, KERN_INFO "Pending many queues PS STA Index = %d remove \n", ii);
+                    continue;
+                }
+            }
+        }
+
+    }
+
+
+    if ((pMgmt->eCurrMode == WMAC_MODE_ESS_AP) && (pDevice->eCurrentPHYType == PHY_TYPE_11G)) {
+
+        // on/off protect mode
+        if (WLAN_GET_ERP_USE_PROTECTION(pDevice->byERPFlag)) {
+            if (!pDevice->bProtectMode) {
+                MACvEnableProtectMD(pDevice->PortOffset);
+                pDevice->bProtectMode = TRUE;
+            }
+        }
+        else {
+            if (pDevice->bProtectMode) {
+                MACvDisableProtectMD(pDevice->PortOffset);
+                pDevice->bProtectMode = FALSE;
+            }
+        }
+        // on/off short slot time
+
+        if (uNonShortSlotSTACnt > 0) {
+            if (pDevice->bShortSlotTime) {
+                pDevice->bShortSlotTime = FALSE;
+                BBvSetShortSlotTime(pDevice);
+                vUpdateIFS((PVOID)pDevice);
+            }
+        }
+        else {
+            if (!pDevice->bShortSlotTime) {
+                pDevice->bShortSlotTime = TRUE;
+                BBvSetShortSlotTime(pDevice);
+                vUpdateIFS((PVOID)pDevice);
+            }
+        }
+
+        // on/off barker long preamble mode
+
+        if (uLongPreambleSTACnt > 0) {
+            if (!pDevice->bBarkerPreambleMd) {
+                MACvEnableBarkerPreambleMd(pDevice->PortOffset);
+                pDevice->bBarkerPreambleMd = TRUE;
+            }
+        }
+        else {
+            if (pDevice->bBarkerPreambleMd) {
+                MACvDisableBarkerPreambleMd(pDevice->PortOffset);
+                pDevice->bBarkerPreambleMd = FALSE;
+            }
+        }
+
+    }
+
+
+    // Check if any STA in PS mode, enable DTIM multicast deliver
+    if (pMgmt->eCurrMode == WMAC_MODE_ESS_AP) {
+        if (uSleepySTACnt > 0)
+            pMgmt->sNodeDBTable[0].bPSEnable = TRUE;
+        else
+            pMgmt->sNodeDBTable[0].bPSEnable = FALSE;
+    }
+
+    pItemSSID = (PWLAN_IE_SSID)pMgmt->abyDesireSSID;
+    pCurrSSID = (PWLAN_IE_SSID)pMgmt->abyCurrSSID;
+//printk("pCurrSSID=%s\n",pCurrSSID->abySSID);
+    if ((pMgmt->eCurrMode == WMAC_MODE_STANDBY) ||
+        (pMgmt->eCurrMode == WMAC_MODE_ESS_STA)) {
+
+        if (pMgmt->sNodeDBTable[0].bActive) { // Assoc with BSS
+           // DEVICE_PRT(MSG_LEVEL_INFO, KERN_INFO "Callback inactive Count = [%d]\n", pMgmt->sNodeDBTable[0].uInActiveCount);
+            //if (pDevice->bUpdateBBVGA) {
+            //  s_vCheckSensitivity((HANDLE) pDevice);
+            //}
+            if (pDevice->bUpdateBBVGA) {
+               // s_vCheckSensitivity((HANDLE) pDevice);
+               s_vCheckPreEDThreshold((HANDLE)pDevice);
+            }
+    	    if ((pMgmt->sNodeDBTable[0].uInActiveCount >= (LOST_BEACON_COUNT/2)) &&
+    	        (pDevice->byBBVGACurrent != pDevice->abyBBVGA[0]) ) {
+    	        pDevice->byBBVGANew = pDevice->abyBBVGA[0];
+                bScheduleCommand((HANDLE) pDevice, WLAN_CMD_CHANGE_BBSENSITIVITY, NULL);
+    	    }
+
+
+        	if (pMgmt->sNodeDBTable[0].uInActiveCount >= LOST_BEACON_COUNT) {
+                pMgmt->sNodeDBTable[0].bActive = FALSE;
+                pMgmt->eCurrMode = WMAC_MODE_STANDBY;
+                pMgmt->eCurrState = WMAC_STATE_IDLE;
+                netif_stop_queue(pDevice->dev);
+                pDevice->bLinkPass = FALSE;
+                pDevice->bRoaming = TRUE;
+                DEVICE_PRT(MSG_LEVEL_NOTICE, KERN_INFO "Lost AP beacon [%d] sec, disconnected !\n", pMgmt->sNodeDBTable[0].uInActiveCount);
+        if ((pDevice->bWPADEVUp) && (pDevice->skb != NULL)) {
+             wpahdr = (viawget_wpa_header *)pDevice->skb->data;
+             wpahdr->type = VIAWGET_DISASSOC_MSG;
+             wpahdr->resp_ie_len = 0;
+             wpahdr->req_ie_len = 0;
+             skb_put(pDevice->skb, sizeof(viawget_wpa_header));
+             pDevice->skb->dev = pDevice->wpadev;
+             pDevice->skb->mac_header = pDevice->skb->data;
+             pDevice->skb->pkt_type = PACKET_HOST;
+             pDevice->skb->protocol = htons(ETH_P_802_2);
+             memset(pDevice->skb->cb, 0, sizeof(pDevice->skb->cb));
+             netif_rx(pDevice->skb);
+             pDevice->skb = dev_alloc_skb((int)pDevice->rx_buf_sz);
+         };
+   #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+  // if(pDevice->bWPASuppWextEnabled == TRUE)
+      {
+	union iwreq_data  wrqu;
+	memset(&wrqu, 0, sizeof (wrqu));
+        wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+	printk("wireless_send_event--->SIOCGIWAP(disassociated)\n");
+	wireless_send_event(pDevice->dev, SIOCGIWAP, &wrqu, NULL);
+     }
+  #endif
+			}
+        }
+        else if (pItemSSID->len != 0) {
+            if (pDevice->uAutoReConnectTime < 10) {
+                pDevice->uAutoReConnectTime++;
+	#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+                //network manager support need not do Roaming scan???
+                if(pDevice->bWPASuppWextEnabled ==TRUE)
+		 pDevice->uAutoReConnectTime = 0;
+	     #endif
+
+            }
+            else {
+		    //mike use old encryption status for wpa reauthen
+	      if(pDevice->bWPADEVUp)
+	          pDevice->eEncryptionStatus = pDevice->eOldEncryptionStatus;
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Roaming ...\n");
+                BSSvClearBSSList((HANDLE)pDevice, pDevice->bLinkPass);
+	pMgmt->eScanType = WMAC_SCAN_ACTIVE;
+                bScheduleCommand((HANDLE) pDevice, WLAN_CMD_BSSID_SCAN, pMgmt->abyDesireSSID);
+                bScheduleCommand((HANDLE) pDevice, WLAN_CMD_SSID, pMgmt->abyDesireSSID);
+                pDevice->uAutoReConnectTime = 0;
+            }
+        }
+    }
+
+    if (pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) {
+        // if adhoc started which essid is NULL string, rescaning.
+        if ((pMgmt->eCurrState == WMAC_STATE_STARTED) && (pCurrSSID->len == 0)) {
+            if (pDevice->uAutoReConnectTime < 10) {
+                pDevice->uAutoReConnectTime++;
+            }
+            else {
+                DEVICE_PRT(MSG_LEVEL_NOTICE, KERN_INFO "Adhoc re-scaning ...\n");
+	pMgmt->eScanType = WMAC_SCAN_ACTIVE;
+                bScheduleCommand((HANDLE) pDevice, WLAN_CMD_BSSID_SCAN, NULL);
+                bScheduleCommand((HANDLE) pDevice, WLAN_CMD_SSID, NULL);
+                pDevice->uAutoReConnectTime = 0;
+            };
+        }
+        if (pMgmt->eCurrState == WMAC_STATE_JOINTED) {
+            if (pDevice->bUpdateBBVGA) {
+               //s_vCheckSensitivity((HANDLE) pDevice);
+               s_vCheckPreEDThreshold((HANDLE)pDevice);
+            }
+        	if (pMgmt->sNodeDBTable[0].uInActiveCount >=ADHOC_LOST_BEACON_COUNT) {
+        	    DEVICE_PRT(MSG_LEVEL_NOTICE, KERN_INFO "Lost other STA beacon [%d] sec, started !\n", pMgmt->sNodeDBTable[0].uInActiveCount);
+                pMgmt->sNodeDBTable[0].uInActiveCount = 0;
+                pMgmt->eCurrState = WMAC_STATE_STARTED;
+                netif_stop_queue(pDevice->dev);
+                pDevice->bLinkPass = FALSE;
+            }
+        }
+    }
+
+    spin_unlock_irq(&pDevice->lock);
+
+    pMgmt->sTimerSecondCallback.expires = RUN_AT(HZ);
+    add_timer(&pMgmt->sTimerSecondCallback);
+    return;
+}
+
+
+
+
+/*+
+ *
+ * Routine Description:
+ *
+ *
+ *  Update Tx attemps, Tx failure counter in Node DB
+ *
+ *
+ * Return Value:
+ *    none.
+ *
+-*/
+
+
+
+VOID
+BSSvUpdateNodeTxCounter(
+    IN HANDLE      hDeviceContext,
+    IN BYTE        byTsr0,
+    IN BYTE        byTsr1,
+    IN PBYTE       pbyBuffer,
+    IN UINT        uFIFOHeaderSize
+    )
+{
+    PSDevice        pDevice = (PSDevice)hDeviceContext;
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+    UINT            uNodeIndex = 0;
+    BYTE            byTxRetry = (byTsr0 & TSR0_NCR);
+    PSTxBufHead     pTxBufHead;
+    PS802_11Header  pMACHeader;
+    WORD            wRate;
+    WORD            wFallBackRate = RATE_1M;
+    BYTE            byFallBack;
+    UINT            ii;
+//	UINT		txRetryTemp;
+//PLICE_DEBUG->
+	//txRetryTemp = byTxRetry;
+	//if (txRetryTemp== 8)
+	//txRetryTemp -=3;
+//PLICE_DEBUG <-
+    pTxBufHead = (PSTxBufHead) pbyBuffer;
+    if (pTxBufHead->wFIFOCtl & FIFOCTL_AUTO_FB_0) {
+        byFallBack = AUTO_FB_0;
+    } else if (pTxBufHead->wFIFOCtl & FIFOCTL_AUTO_FB_1) {
+        byFallBack = AUTO_FB_1;
+    } else {
+        byFallBack = AUTO_FB_NONE;
+    }
+    wRate = pTxBufHead->wReserved; //?wRate
+    //printk("BSSvUpdateNodeTxCounter:byTxRetry is %d\n",byTxRetry);
+
+//printk("BSSvUpdateNodeTx:wRate is %d,byFallback is %d\n",wRate,byFallBack);
+//#ifdef	PLICE_DEBUG
+	//printk("BSSvUpdateNodeTx: wRate is %d\n",wRate);
+////#endif
+    // Only Unicast using support rates
+    if (pTxBufHead->wFIFOCtl & FIFOCTL_NEEDACK) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"wRate %04X, byTsr0 %02X, byTsr1 %02X\n", wRate, byTsr0, byTsr1);
+        if (pMgmt->eCurrMode == WMAC_MODE_ESS_STA) {
+            pMgmt->sNodeDBTable[0].uTxAttempts += 1;
+            if ((byTsr1 & TSR1_TERR) == 0) {
+                // transmit success, TxAttempts at least plus one
+                pMgmt->sNodeDBTable[0].uTxOk[MAX_RATE]++;
+                if ( (byFallBack == AUTO_FB_NONE) ||
+                     (wRate < RATE_18M) ) {
+                    wFallBackRate = wRate;
+                } else if (byFallBack == AUTO_FB_0) {
+//PLICE_DEBUG
+				  if (byTxRetry < 5)
+				//if (txRetryTemp < 5)
+					wFallBackRate = awHWRetry0[wRate-RATE_18M][byTxRetry];
+			//wFallBackRate = awHWRetry0[wRate-RATE_12M][byTxRetry];
+			//wFallBackRate = awHWRetry0[wRate-RATE_18M][txRetryTemp] +1;
+		else
+                        wFallBackRate = awHWRetry0[wRate-RATE_18M][4];
+			//wFallBackRate = awHWRetry0[wRate-RATE_12M][4];
+		} else if (byFallBack == AUTO_FB_1) {
+                    if (byTxRetry < 5)
+                        wFallBackRate = awHWRetry1[wRate-RATE_18M][byTxRetry];
+                    else
+                        wFallBackRate = awHWRetry1[wRate-RATE_18M][4];
+                }
+                pMgmt->sNodeDBTable[0].uTxOk[wFallBackRate]++;
+            } else {
+                pMgmt->sNodeDBTable[0].uTxFailures ++;
+            }
+            pMgmt->sNodeDBTable[0].uTxRetry += byTxRetry;
+            if (byTxRetry != 0) {
+                pMgmt->sNodeDBTable[0].uTxFail[MAX_RATE]+=byTxRetry;
+                if ( (byFallBack == AUTO_FB_NONE) ||
+                     (wRate < RATE_18M) ) {
+                    pMgmt->sNodeDBTable[0].uTxFail[wRate]+=byTxRetry;
+                } else if (byFallBack == AUTO_FB_0) {
+//PLICE_DEBUG
+				   for(ii=0;ii<byTxRetry;ii++)
+		//for (ii=0;ii<txRetryTemp;ii++)
+		{
+                        if (ii < 5)
+                        	{
+
+//PLICE_DEBUG
+						wFallBackRate = awHWRetry0[wRate-RATE_18M][ii];
+					//printk(" II is %d:BSSvUpdateNodeTx:wFallBackRate is %d\n",ii,wFallBackRate);
+				//wFallBackRate = awHWRetry0[wRate-RATE_12M][ii];
+                        	}
+			else
+				{
+			wFallBackRate = awHWRetry0[wRate-RATE_18M][4];
+			//printk("ii is %d BSSvUpdateNodeTx:wFallBackRate is %d\n",ii,wFallBackRate);
+				//wFallBackRate = awHWRetry0[wRate-RATE_12M][4];
+				}
+						pMgmt->sNodeDBTable[0].uTxFail[wFallBackRate]++;
+                    }
+                } else if (byFallBack == AUTO_FB_1) {
+                    for(ii=0;ii<byTxRetry;ii++) {
+                        if (ii < 5)
+                            wFallBackRate = awHWRetry1[wRate-RATE_18M][ii];
+                        else
+                            wFallBackRate = awHWRetry1[wRate-RATE_18M][4];
+                        pMgmt->sNodeDBTable[0].uTxFail[wFallBackRate]++;
+                    }
+                }
+            }
+        };
+
+        if ((pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) ||
+            (pMgmt->eCurrMode == WMAC_MODE_ESS_AP)) {
+
+            pMACHeader = (PS802_11Header)(pbyBuffer + uFIFOHeaderSize);
+
+            if (BSSDBbIsSTAInNodeDB((HANDLE)pMgmt, &(pMACHeader->abyAddr1[0]), &uNodeIndex)){
+                pMgmt->sNodeDBTable[uNodeIndex].uTxAttempts += 1;
+                if ((byTsr1 & TSR1_TERR) == 0) {
+                    // transmit success, TxAttempts at least plus one
+                    pMgmt->sNodeDBTable[uNodeIndex].uTxOk[MAX_RATE]++;
+                    if ( (byFallBack == AUTO_FB_NONE) ||
+                         (wRate < RATE_18M) ) {
+                        wFallBackRate = wRate;
+                    } else if (byFallBack == AUTO_FB_0) {
+                        if (byTxRetry < 5)
+                            wFallBackRate = awHWRetry0[wRate-RATE_18M][byTxRetry];
+                        else
+                            wFallBackRate = awHWRetry0[wRate-RATE_18M][4];
+                    } else if (byFallBack == AUTO_FB_1) {
+                        if (byTxRetry < 5)
+                            wFallBackRate = awHWRetry1[wRate-RATE_18M][byTxRetry];
+                        else
+                            wFallBackRate = awHWRetry1[wRate-RATE_18M][4];
+                    }
+                    pMgmt->sNodeDBTable[uNodeIndex].uTxOk[wFallBackRate]++;
+                } else {
+                    pMgmt->sNodeDBTable[uNodeIndex].uTxFailures ++;
+                }
+                pMgmt->sNodeDBTable[uNodeIndex].uTxRetry += byTxRetry;
+                if (byTxRetry != 0) {
+                    pMgmt->sNodeDBTable[uNodeIndex].uTxFail[MAX_RATE]+=byTxRetry;
+                    if ( (byFallBack == AUTO_FB_NONE) ||
+                         (wRate < RATE_18M) ) {
+                        pMgmt->sNodeDBTable[uNodeIndex].uTxFail[wRate]+=byTxRetry;
+                    } else if (byFallBack == AUTO_FB_0) {
+                        for(ii=0;ii<byTxRetry;ii++) {
+                            if (ii < 5)
+                                wFallBackRate = awHWRetry0[wRate-RATE_18M][ii];
+                            else
+                                wFallBackRate = awHWRetry0[wRate-RATE_18M][4];
+                            pMgmt->sNodeDBTable[uNodeIndex].uTxFail[wFallBackRate]++;
+                        }
+                    } else if (byFallBack == AUTO_FB_1) {
+                        for(ii=0;ii<byTxRetry;ii++) {
+                            if (ii < 5)
+                                wFallBackRate = awHWRetry1[wRate-RATE_18M][ii];
+                            else
+                                wFallBackRate = awHWRetry1[wRate-RATE_18M][4];
+                            pMgmt->sNodeDBTable[uNodeIndex].uTxFail[wFallBackRate]++;
+                        }
+                    }
+                }
+            };
+        }
+    };
+
+    return;
+
+}
+
+
+
+
+/*+
+ *
+ * Routine Description:
+ *    Clear Nodes & skb in DB Table
+ *
+ *
+ * Parameters:
+ *  In:
+ *      hDeviceContext        - The adapter context.
+ *      uStartIndex           - starting index
+ *  Out:
+ *      none
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+
+VOID
+BSSvClearNodeDBTable(
+    IN HANDLE hDeviceContext,
+    IN UINT uStartIndex
+    )
+
+{
+    PSDevice     pDevice = (PSDevice)hDeviceContext;
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+    struct sk_buff  *skb;
+    UINT            ii;
+
+    for (ii = uStartIndex; ii < (MAX_NODE_NUM + 1); ii++) {
+        if (pMgmt->sNodeDBTable[ii].bActive) {
+            // check if sTxPSQueue has been initial
+            if (pMgmt->sNodeDBTable[ii].sTxPSQueue.next != NULL) {
+                while ((skb = skb_dequeue(&pMgmt->sNodeDBTable[ii].sTxPSQueue)) != NULL){
+                        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "PS skb != NULL %d\n", ii);
+                        dev_kfree_skb(skb);
+                }
+            }
+            memset(&pMgmt->sNodeDBTable[ii], 0, sizeof(KnownNodeDB));
+        }
+    }
+
+    return;
+};
+
+
+VOID s_vCheckSensitivity(
+    IN HANDLE hDeviceContext
+    )
+{
+    PSDevice        pDevice = (PSDevice)hDeviceContext;
+    PKnownBSS       pBSSList = NULL;
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+    int             ii;
+
+    if ((pDevice->byLocalID <= REV_ID_VT3253_A1) && (pDevice->byRFType == RF_RFMD2959) &&
+        (pMgmt->eCurrMode == WMAC_MODE_IBSS_STA)) {
+        return;
+    }
+
+    if ((pMgmt->eCurrState == WMAC_STATE_ASSOC) ||
+        ((pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) && (pMgmt->eCurrState == WMAC_STATE_JOINTED))) {
+        pBSSList = BSSpAddrIsInBSSList(pDevice, pMgmt->abyCurrBSSID, (PWLAN_IE_SSID)pMgmt->abyCurrSSID);
+        if (pBSSList != NULL) {
+            // Updata BB Reg if RSSI is too strong.
+            LONG    LocalldBmAverage = 0;
+            LONG    uNumofdBm = 0;
+            for (ii = 0; ii < RSSI_STAT_COUNT; ii++) {
+                if (pBSSList->ldBmAverage[ii] != 0) {
+                    uNumofdBm ++;
+                    LocalldBmAverage += pBSSList->ldBmAverage[ii];
+                }
+            }
+            if (uNumofdBm > 0) {
+                LocalldBmAverage = LocalldBmAverage/uNumofdBm;
+                for (ii=0;ii<BB_VGA_LEVEL;ii++) {
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"LocalldBmAverage:%ld, %ld %02x\n", LocalldBmAverage, pDevice->ldBmThreshold[ii], pDevice->abyBBVGA[ii]);
+                    if (LocalldBmAverage < pDevice->ldBmThreshold[ii]) {
+                	    pDevice->byBBVGANew = pDevice->abyBBVGA[ii];
+                        break;
+                    }
+                }
+                if (pDevice->byBBVGANew != pDevice->byBBVGACurrent) {
+                    pDevice->uBBVGADiffCount++;
+                    if (pDevice->uBBVGADiffCount >= BB_VGA_CHANGE_THRESHOLD)
+                        bScheduleCommand((HANDLE) pDevice, WLAN_CMD_CHANGE_BBSENSITIVITY, NULL);
+                } else {
+                    pDevice->uBBVGADiffCount = 0;
+                }
+            }
+        }
+    }
+}
+
+
+VOID
+BSSvClearAnyBSSJoinRecord (
+    IN HANDLE hDeviceContext
+    )
+{
+    PSDevice        pDevice = (PSDevice)hDeviceContext;
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+    UINT            ii;
+
+    for (ii = 0; ii < MAX_BSS_NUM; ii++) {
+        pMgmt->sBSSList[ii].bSelected = FALSE;
+    }
+    return;
+}
+
+#ifdef Calcu_LinkQual
+VOID s_uCalculateLinkQual(
+    IN HANDLE hDeviceContext
+    )
+{
+   PSDevice        pDevice = (PSDevice)hDeviceContext;
+   ULONG TxOkRatio, TxCnt;
+   ULONG RxOkRatio,RxCnt;
+   ULONG RssiRatio;
+   long ldBm;
+
+TxCnt = pDevice->scStatistic.TxNoRetryOkCount +
+	      pDevice->scStatistic.TxRetryOkCount +
+	      pDevice->scStatistic.TxFailCount;
+RxCnt = pDevice->scStatistic.RxFcsErrCnt +
+	      pDevice->scStatistic.RxOkCnt;
+TxOkRatio = (TxCnt < 6) ? 4000:((pDevice->scStatistic.TxNoRetryOkCount * 4000) / TxCnt);
+RxOkRatio = (RxCnt < 6) ? 2000:((pDevice->scStatistic.RxOkCnt * 2000) / RxCnt);
+//decide link quality
+if(pDevice->bLinkPass !=TRUE)
+{
+ //  printk("s_uCalculateLinkQual-->Link disconnect and Poor quality**\n");
+   pDevice->scStatistic.LinkQuality = 0;
+   pDevice->scStatistic.SignalStren = 0;
+}
+else
+{
+   RFvRSSITodBm(pDevice, (BYTE)(pDevice->uCurrRSSI), &ldBm);
+   if(-ldBm < 50)  {
+   	RssiRatio = 4000;
+     }
+   else if(-ldBm > 90) {
+   	RssiRatio = 0;
+     }
+   else {
+   	RssiRatio = (40-(-ldBm-50))*4000/40;
+     }
+   pDevice->scStatistic.SignalStren = RssiRatio/40;
+   pDevice->scStatistic.LinkQuality = (RssiRatio+TxOkRatio+RxOkRatio)/100;
+}
+   pDevice->scStatistic.RxFcsErrCnt = 0;
+   pDevice->scStatistic.RxOkCnt = 0;
+   pDevice->scStatistic.TxFailCount = 0;
+   pDevice->scStatistic.TxNoRetryOkCount = 0;
+   pDevice->scStatistic.TxRetryOkCount = 0;
+   return;
+}
+#endif
+
+VOID s_vCheckPreEDThreshold(
+    IN HANDLE hDeviceContext
+    )
+{
+    PSDevice        pDevice = (PSDevice)hDeviceContext;
+    PKnownBSS       pBSSList = NULL;
+    PSMgmtObject    pMgmt = &(pDevice->sMgmtObj);
+
+    if ((pMgmt->eCurrState == WMAC_STATE_ASSOC) ||
+        ((pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) && (pMgmt->eCurrState == WMAC_STATE_JOINTED))) {
+        pBSSList = BSSpAddrIsInBSSList(pDevice, pMgmt->abyCurrBSSID, (PWLAN_IE_SSID)pMgmt->abyCurrSSID);
+        if (pBSSList != NULL) {
+            pDevice->byBBPreEDRSSI = (BYTE) (~(pBSSList->ldBmAverRange) + 1);
+            //BBvUpdatePreEDThreshold(pDevice, FALSE);
+        }
+    }
+    return;
+}
diff --git a/drivers/staging/vt6655/bssdb.h b/drivers/staging/vt6655/bssdb.h
new file mode 100644
index 00000000000..d35616d4883
--- /dev/null
+++ b/drivers/staging/vt6655/bssdb.h
@@ -0,0 +1,380 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: bssdb.h
+ *
+ * Purpose: Handles the Basic Service Set & Node Database functions
+ *
+ * Author: Lyndon Chen
+ *
+ * Date: July 16, 2002
+ *
+ */
+
+#ifndef __BSSDB_H__
+#define __BSSDB_H__
+
+//#if !defined(__DEVICE_H__)
+//#include "device.h"
+//#endif
+#include <linux/skbuff.h>
+#if !defined(__80211HDR_H__)
+#include "80211hdr.h"
+#endif
+#if !defined(__80211MGR_H__)
+#include "80211mgr.h"
+#endif
+#if !defined(__CARD_H__)
+#include "card.h"
+#endif
+
+
+
+/*---------------------  Export Definitions -------------------------*/
+
+#define MAX_NODE_NUM             64
+#define MAX_BSS_NUM              42
+#define LOST_BEACON_COUNT      	 10   // 10 sec, XP defined
+#define MAX_PS_TX_BUF            32   // sta max power saving tx buf
+#define ADHOC_LOST_BEACON_COUNT  30   // 30 sec, beacon lost for adhoc only
+#define MAX_INACTIVE_COUNT       300  // 300 sec, inactive STA node refresh
+
+#define USE_PROTECT_PERIOD       10   // 10 sec, Use protect mode check period
+#define ERP_RECOVER_COUNT        30   // 30 sec, ERP support callback check
+#define BSS_CLEAR_COUNT           1
+
+#define RSSI_STAT_COUNT          10
+#define MAX_CHECK_RSSI_COUNT     8
+
+// STA dwflags
+#define WLAN_STA_AUTH            BIT0
+#define WLAN_STA_ASSOC           BIT1
+#define WLAN_STA_PS              BIT2
+#define WLAN_STA_TIM             BIT3
+// permanent; do not remove entry on expiration
+#define WLAN_STA_PERM            BIT4
+// If 802.1X is used, this flag is
+// controlling whether STA is authorized to
+// send and receive non-IEEE 802.1X frames
+#define WLAN_STA_AUTHORIZED      BIT5
+
+#define MAX_RATE            12
+
+#define MAX_WPA_IE_LEN      64
+
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+
+/*---------------------  Export Types  ------------------------------*/
+
+//
+// IEEE 802.11 Structures and definitions
+//
+
+typedef enum _NDIS_802_11_NETWORK_TYPE
+{
+    Ndis802_11FH,
+    Ndis802_11DS,
+    Ndis802_11OFDM5,
+    Ndis802_11OFDM24,
+    Ndis802_11NetworkTypeMax    // not a real type, defined as an upper bound
+} NDIS_802_11_NETWORK_TYPE, *PNDIS_802_11_NETWORK_TYPE;
+
+
+typedef struct tagSERPObject {
+    BOOL    bERPExist;
+    BYTE    byERP;
+} ERPObject, DEF* PERPObject;
+
+
+typedef struct tagSRSNCapObject {
+    BOOL    bRSNCapExist;
+    WORD    wRSNCap;
+} SRSNCapObject, DEF* PSRSNCapObject;
+
+// BSS info(AP)
+#pragma pack(1)
+typedef struct tagKnownBSS {
+    // BSS info
+    BOOL            bActive;
+    BYTE            abyBSSID[WLAN_BSSID_LEN];
+    UINT            uChannel;
+    BYTE            abySuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1];
+    BYTE            abyExtSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1];
+    UINT            uRSSI;
+    BYTE            bySQ;
+    WORD            wBeaconInterval;
+    WORD            wCapInfo;
+    BYTE            abySSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
+    BYTE            byRxRate;
+//    WORD            wATIMWindow;
+    BYTE            byRSSIStatCnt;
+    LONG            ldBmMAX;
+    LONG            ldBmAverage[RSSI_STAT_COUNT];
+     LONG            ldBmAverRange;
+    //For any BSSID selection improvment
+    BOOL            bSelected;
+
+    //++ WPA informations
+    BOOL            bWPAValid;
+    BYTE            byGKType;
+    BYTE            abyPKType[4];
+    WORD            wPKCount;
+    BYTE            abyAuthType[4];
+    WORD            wAuthCount;
+    BYTE            byDefaultK_as_PK;
+    BYTE            byReplayIdx;
+    //--
+
+    //++ WPA2 informations
+    BOOL            bWPA2Valid;
+    BYTE            byCSSGK;
+    WORD            wCSSPKCount;
+    BYTE            abyCSSPK[4];
+    WORD            wAKMSSAuthCount;
+    BYTE            abyAKMSSAuthType[4];
+
+    //++  wpactl
+    BYTE            byWPAIE[MAX_WPA_IE_LEN];
+    BYTE            byRSNIE[MAX_WPA_IE_LEN];
+    WORD            wWPALen;
+    WORD            wRSNLen;
+
+    // Clear count
+    UINT            uClearCount;
+//    BYTE            abyIEs[WLAN_BEACON_FR_MAXLEN];
+    UINT            uIELength;
+    QWORD           qwBSSTimestamp;
+    QWORD           qwLocalTSF;     // local TSF timer
+
+//    NDIS_802_11_NETWORK_TYPE    NetworkTypeInUse;
+    CARD_PHY_TYPE   eNetworkTypeInUse;
+
+    ERPObject       sERP;
+    SRSNCapObject   sRSNCapObj;
+    BYTE            abyIEs[1024];   // don't move this field !!
+
+}__attribute__ ((__packed__))
+KnownBSS , DEF* PKnownBSS;
+
+//2006-1116-01,<Add> by NomadZhao
+#pragma pack()
+
+typedef enum tagNODE_STATE {
+    NODE_FREE,
+    NODE_AGED,
+    NODE_KNOWN,
+    NODE_AUTH,
+    NODE_ASSOC
+} NODE_STATE, *PNODE_STATE;
+
+
+// STA node info
+typedef struct tagKnownNodeDB {
+    // STA info
+    BOOL            bActive;
+    BYTE            abyMACAddr[WLAN_ADDR_LEN];
+    BYTE            abyCurrSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN];
+    BYTE            abyCurrExtSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN];
+    WORD            wTxDataRate;
+    BOOL            bShortPreamble;
+    BOOL            bERPExist;
+    BOOL            bShortSlotTime;
+    UINT            uInActiveCount;
+    WORD            wMaxBasicRate;     //Get from byTopOFDMBasicRate or byTopCCKBasicRate which depends on packetTyp.
+    WORD            wMaxSuppRate;      //Records the highest supported rate getting from SuppRates IE and ExtSuppRates IE in Beacon.
+    WORD            wSuppRate;
+    BYTE            byTopOFDMBasicRate;//Records the highest basic rate in OFDM mode
+    BYTE            byTopCCKBasicRate; //Records the highest basic rate in CCK mode
+
+    // For AP mode
+    struct sk_buff_head sTxPSQueue;
+    WORD            wCapInfo;
+    WORD            wListenInterval;
+    WORD            wAID;
+    NODE_STATE      eNodeState;
+    BOOL            bPSEnable;
+    BOOL            bRxPSPoll;
+    BYTE            byAuthSequence;
+    ULONG           ulLastRxJiffer;
+    BYTE            bySuppRate;
+    DWORD           dwFlags;
+    WORD            wEnQueueCnt;
+
+    BOOL            bOnFly;
+    ULONGLONG       KeyRSC;
+    BYTE            byKeyIndex;
+    DWORD           dwKeyIndex;
+    BYTE            byCipherSuite;
+    DWORD           dwTSC47_16;
+    WORD            wTSC15_0;
+    UINT            uWepKeyLength;
+    BYTE            abyWepKey[WLAN_WEPMAX_KEYLEN];
+    //
+    // Auto rate fallback vars
+    BOOL            bIsInFallback;
+    UINT            uAverageRSSI;
+    UINT            uRateRecoveryTimeout;
+    UINT            uRatePollTimeout;
+    UINT            uTxFailures;
+    UINT            uTxAttempts;
+
+    UINT            uTxRetry;
+    UINT            uFailureRatio;
+    UINT            uRetryRatio;
+    UINT            uTxOk[MAX_RATE+1];
+    UINT            uTxFail[MAX_RATE+1];
+    UINT            uTimeCount;
+
+} KnownNodeDB, DEF* PKnownNodeDB;
+
+
+/*---------------------  Export Functions  --------------------------*/
+
+
+
+PKnownBSS
+BSSpSearchBSSList(
+    IN HANDLE hDeviceContext,
+    IN PBYTE pbyDesireBSSID,
+    IN PBYTE pbyDesireSSID,
+    IN CARD_PHY_TYPE ePhyType
+    );
+
+PKnownBSS
+BSSpAddrIsInBSSList(
+    IN HANDLE hDeviceContext,
+    IN PBYTE abyBSSID,
+    IN PWLAN_IE_SSID pSSID
+    );
+
+VOID
+BSSvClearBSSList(
+    IN HANDLE hDeviceContext,
+    IN BOOL bKeepCurrBSSID
+    );
+
+BOOL
+BSSbInsertToBSSList(
+    IN HANDLE hDeviceContext,
+    IN PBYTE abyBSSIDAddr,
+    IN QWORD qwTimestamp,
+    IN WORD wBeaconInterval,
+    IN WORD wCapInfo,
+    IN BYTE byCurrChannel,
+    IN PWLAN_IE_SSID pSSID,
+    IN PWLAN_IE_SUPP_RATES pSuppRates,
+    IN PWLAN_IE_SUPP_RATES pExtSuppRates,
+    IN PERPObject psERP,
+    IN PWLAN_IE_RSN pRSN,
+    IN PWLAN_IE_RSN_EXT pRSNWPA,
+    IN PWLAN_IE_COUNTRY pIE_Country,
+    IN PWLAN_IE_QUIET pIE_Quiet,
+    IN UINT uIELength,
+    IN PBYTE pbyIEs,
+    IN HANDLE pRxPacketContext
+    );
+
+
+BOOL
+BSSbUpdateToBSSList(
+    IN HANDLE hDeviceContext,
+    IN QWORD qwTimestamp,
+    IN WORD wBeaconInterval,
+    IN WORD wCapInfo,
+    IN BYTE byCurrChannel,
+    IN BOOL bChannelHit,
+    IN PWLAN_IE_SSID pSSID,
+    IN PWLAN_IE_SUPP_RATES pSuppRates,
+    IN PWLAN_IE_SUPP_RATES pExtSuppRates,
+    IN PERPObject psERP,
+    IN PWLAN_IE_RSN pRSN,
+    IN PWLAN_IE_RSN_EXT pRSNWPA,
+    IN PWLAN_IE_COUNTRY pIE_Country,
+    IN PWLAN_IE_QUIET pIE_Quiet,
+    IN PKnownBSS pBSSList,
+    IN UINT uIELength,
+    IN PBYTE pbyIEs,
+    IN HANDLE pRxPacketContext
+    );
+
+
+BOOL
+BSSDBbIsSTAInNodeDB(
+    IN HANDLE hDeviceContext,
+    IN PBYTE abyDstAddr,
+    OUT PUINT puNodeIndex
+    );
+
+VOID
+BSSvCreateOneNode(
+    IN HANDLE hDeviceContext,
+    OUT PUINT puNodeIndex
+    );
+
+VOID
+BSSvUpdateAPNode(
+    IN HANDLE hDeviceContext,
+    IN PWORD pwCapInfo,
+    IN PWLAN_IE_SUPP_RATES pItemRates,
+    IN PWLAN_IE_SUPP_RATES pExtSuppRates
+    );
+
+
+VOID
+BSSvSecondCallBack(
+    IN HANDLE hDeviceContext
+    );
+
+VOID
+BSSvUpdateNodeTxCounter(
+    IN HANDLE hDeviceContext,
+    IN BYTE        byTsr0,
+    IN BYTE        byTsr1,
+    IN PBYTE       pbyBuffer,
+    IN UINT        uFIFOHeaderSize
+    );
+
+VOID
+BSSvRemoveOneNode(
+    IN HANDLE hDeviceContext,
+    IN UINT uNodeIndex
+    );
+
+VOID
+BSSvAddMulticastNode(
+    IN HANDLE hDeviceContext
+    );
+
+
+VOID
+BSSvClearNodeDBTable(
+    IN HANDLE hDeviceContext,
+    IN UINT uStartIndex
+    );
+
+VOID
+BSSvClearAnyBSSJoinRecord(
+    IN HANDLE hDeviceContext
+    );
+
+#endif //__BSSDB_H__
diff --git a/drivers/staging/vt6655/card.c b/drivers/staging/vt6655/card.c
new file mode 100644
index 00000000000..723f44e0bba
--- /dev/null
+++ b/drivers/staging/vt6655/card.c
@@ -0,0 +1,3126 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: card.c
+ * Purpose: Provide functions to setup NIC operation mode
+ * Functions:
+ *      s_vSafeResetTx - Rest Tx
+ *      CARDvSetRSPINF - Set RSPINF
+ *      vUpdateIFS - Update slotTime,SIFS,DIFS, and EIFS
+ *      CARDvUpdateBasicTopRate - Update BasicTopRate
+ *      CARDbAddBasicRate - Add to BasicRateSet
+ *      CARDbSetBasicRate - Set Basic Tx Rate
+ *      CARDbIsOFDMinBasicRate - Check if any OFDM rate is in BasicRateSet
+ *      CARDvSetLoopbackMode - Set Loopback mode
+ *      CARDbSoftwareReset - Sortware reset NIC
+ *      CARDqGetTSFOffset - Caculate TSFOffset
+ *      CARDbGetCurrentTSF - Read Current NIC TSF counter
+ *      CARDqGetNextTBTT - Caculate Next Beacon TSF counter
+ *      CARDvSetFirstNextTBTT - Set NIC Beacon time
+ *      CARDvUpdateNextTBTT - Sync. NIC Beacon time
+ *      CARDbRadioPowerOff - Turn Off NIC Radio Power
+ *      CARDbRadioPowerOn - Turn On NIC Radio Power
+ *      CARDbSetWEPMode - Set NIC Wep mode
+ *      CARDbSetTxPower - Set NIC tx power
+ *
+ * Revision History:
+ *      06-10-2003 Bryan YC Fan:  Re-write codes to support VT3253 spec.
+ *      08-26-2003 Kyle Hsu:      Modify the defination type of dwIoBase.
+ *      09-01-2003 Bryan YC Fan:  Add vUpdateIFS().
+ *
+ */
+
+#if !defined(__TMACRO_H__)
+#include "tmacro.h"
+#endif
+#if !defined(__CARD_H__)
+#include "card.h"
+#endif
+#if !defined(__TBIT_H__)
+#include "tbit.h"
+#endif
+#if !defined(__BASEBAND_H__)
+#include "baseband.h"
+#endif
+#if !defined(__MAC_H__)
+#include "mac.h"
+#endif
+#if !defined(__DESC_H__)
+#include "desc.h"
+#endif
+#if !defined(__RF_H__)
+#include "rf.h"
+#endif
+#if !defined(__VNTWIFI_H__)
+#include "vntwifi.h"
+#endif
+#if !defined(__POWER_H__)
+#include "power.h"
+#endif
+#if !defined(__KEY_H__)
+#include "key.h"
+#endif
+#if !defined(__RC4_H__)
+#include "rc4.h"
+#endif
+#if !defined(__COUNTRY_H__)
+#include "country.h"
+#endif
+#if !defined(__UMEM_H__)
+#include "umem.h"
+#endif
+
+
+
+/*---------------------  Static Definitions -------------------------*/
+
+//static int          msglevel                =MSG_LEVEL_DEBUG;
+static int          msglevel                =MSG_LEVEL_INFO;
+
+#define C_SIFS_A        16      // micro sec.
+#define C_SIFS_BG       10
+
+#define C_EIFS          80      // micro sec.
+
+
+#define C_SLOT_SHORT    9       // micro sec.
+#define C_SLOT_LONG     20
+
+#define C_CWMIN_A       15      // slot time
+#define C_CWMIN_B       31
+
+#define C_CWMAX         1023    // slot time
+
+#define CARD_MAX_CHANNEL_TBL    56
+
+#define WAIT_BEACON_TX_DOWN_TMO         3    // Times
+
+typedef struct tagSChannelTblElement {
+    BYTE    byChannelNumber;
+    UINT    uFrequency;
+    BOOL    bValid;
+    BYTE    byMAP;
+}SChannelTblElement, DEF* PSChannelTblElement;
+
+                                                              //1M,   2M,   5M,  11M,  18M,  24M,  36M,  54M
+static BYTE abyDefaultSuppRatesG[] = {WLAN_EID_SUPP_RATES, 8, 0x02, 0x04, 0x0B, 0x16, 0x24, 0x30, 0x48, 0x6C};
+                                                                    //6M,   9M,  12M,  48M
+static BYTE abyDefaultExtSuppRatesG[] = {WLAN_EID_EXTSUPP_RATES, 4, 0x0C, 0x12, 0x18, 0x60};
+                                                              //6M,   9M,  12M,  18M,  24M,  36M,  48M,  54M
+static BYTE abyDefaultSuppRatesA[] = {WLAN_EID_SUPP_RATES, 8, 0x0C, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C};
+                                                              //1M,   2M,   5M,  11M,
+static BYTE abyDefaultSuppRatesB[] = {WLAN_EID_SUPP_RATES, 4, 0x02, 0x04, 0x0B, 0x16};
+
+
+
+/*---------------------  Static Classes  ----------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+
+
+const WORD cwRXBCNTSFOff[MAX_RATE] =
+{17, 17, 17, 17, 34, 23, 17, 11, 8, 5, 4, 3};
+
+static SChannelTblElement sChannelTbl[CARD_MAX_CHANNEL_TBL+1] =
+{
+  {0,   0,    FALSE,    0},
+  {1,   2412, TRUE,     0},
+  {2,   2417, TRUE,     0},
+  {3,   2422, TRUE,     0},
+  {4,   2427, TRUE,     0},
+  {5,   2432, TRUE,     0},
+  {6,   2437, TRUE,     0},
+  {7,   2442, TRUE,     0},
+  {8,   2447, TRUE,     0},
+  {9,   2452, TRUE,     0},
+  {10,  2457, TRUE,     0},
+  {11,  2462, TRUE,     0},
+  {12,  2467, TRUE,     0},
+  {13,  2472, TRUE,     0},
+  {14,  2484, TRUE,     0},
+  {183, 4915, TRUE,     0},
+  {184, 4920, TRUE,     0},
+  {185, 4925, TRUE,     0},
+  {187, 4935, TRUE,     0},
+  {188, 4940, TRUE,     0},
+  {189, 4945, TRUE,     0},
+  {192, 4960, TRUE,     0},
+  {196, 4980, TRUE,     0},
+  {7,   5035, TRUE,     0},
+  {8,   5040, TRUE,     0},
+  {9,   5045, TRUE,     0},
+  {11,  5055, TRUE,     0},
+  {12,  5060, TRUE,     0},
+  {16,  5080, TRUE,     0},
+  {34,  5170, TRUE,     0},
+  {36,  5180, TRUE,     0},
+  {38,  5190, TRUE,     0},
+  {40,  5200, TRUE,     0},
+  {42,  5210, TRUE,     0},
+  {44,  5220, TRUE,     0},
+  {46,  5230, TRUE,     0},
+  {48,  5240, TRUE,     0},
+  {52,  5260, TRUE,     0},
+  {56,  5280, TRUE,     0},
+  {60,  5300, TRUE,     0},
+  {64,  5320, TRUE,     0},
+  {100, 5500, TRUE,     0},
+  {104, 5520, TRUE,     0},
+  {108, 5540, TRUE,     0},
+  {112, 5560, TRUE,     0},
+  {116, 5580, TRUE,     0},
+  {120, 5600, TRUE,     0},
+  {124, 5620, TRUE,     0},
+  {128, 5640, TRUE,     0},
+  {132, 5660, TRUE,     0},
+  {136, 5680, TRUE,     0},
+  {140, 5700, TRUE,     0},
+  {149, 5745, TRUE,     0},
+  {153, 5765, TRUE,     0},
+  {157, 5785, TRUE,     0},
+  {161, 5805, TRUE,     0},
+  {165, 5825, TRUE,     0}
+};
+
+
+/************************************************************************
+ * The Radar regulation rules for each country
+ ************************************************************************/
+SCountryTable ChannelRuleTab[CCODE_MAX+1] =
+{
+/************************************************************************
+ * This table is based on Athero driver rules
+ ************************************************************************/
+/* Country          Available channels, ended with 0                    */
+/*                                              1   2   3   4   5   6   7   8   9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30  31  32  33  34  35  36  37  38  39  40  41  42  43  44  45  46  47  48  49  50  51  52  53  54  55  56  */
+{CCODE_FCC,                     {'U','S'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_TELEC,                   {'J','P'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  1,  0,  0,  1,  0,  1,  1,  0,  1,  0,  0,  1,  1,  1,  0,  1,  0,  1,  0,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0, 23,  0,  0, 23,  0, 23, 23,  0, 23,  0,  0, 23, 23, 23,  0, 23,  0, 23,  0, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_ETSI,                    {'E','U'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_RESV3,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_RESV4,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_RESV5,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_RESV6,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_RESV7,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_RESV8,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_RESV9,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_RESVa,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_RESVb,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_RESVc,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_RESVd,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_RESVe,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_ALLBAND,                 {' ',' '},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_ALBANIA,                 {'A','L'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_ALGERIA,                 {'D','Z'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_ARGENTINA,               {'A','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17, 17, 17,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30,  0}  },
+{CCODE_ARMENIA,                 {'A','M'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 18,  0, 18,  0, 18,  0, 18, 18, 18, 18, 18,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_AUSTRALIA,               {'A','U'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23,  0, 23,  0, 23,  0, 23, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_AUSTRIA,                 {'A','T'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 15,  0, 15,  0, 15,  0, 15,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_AZERBAIJAN,              {'A','Z'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 18,  0, 18,  0, 18,  0, 18, 18, 18, 18, 18,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_BAHRAIN,                 {'B','H'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_BELARUS,                 {'B','Y'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_BELGIUM,                 {'B','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 18,  0, 18,  0, 18,  0, 18,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_BELIZE,                  {'B','Z'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_BOLIVIA,                 {'B','O'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_BRAZIL,                  {'B','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_BRUNEI_DARUSSALAM,       {'B','N'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_BULGARIA,                {'B','G'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  0,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23,  0, 23,  0, 23,  0, 23, 23, 23,  0,  0, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30,  0,  0,  0,  0,  0}  },
+{CCODE_CANADA,                  {'C','A'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_CHILE,                   {'C','L'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17, 17, 17, 17, 17}  },
+{CCODE_CHINA,                   {'C','N'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_COLOMBIA,                {'C','O'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_COSTA_RICA,              {'C','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_CROATIA,                 {'H','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_CYPRUS,                  {'C','Y'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_CZECH,                   {'C','Z'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_DENMARK,                 {'D','K'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_DOMINICAN_REPUBLIC,      {'D','O'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_ECUADOR,                 {'E','C'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_EGYPT,                   {'E','G'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_EL_SALVADOR,             {'S','V'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_ESTONIA,                 {'E','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_FINLAND,                 {'F','I'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_FRANCE,                  {'F','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_GERMANY,                 {'D','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_GREECE,                  {'G','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_GEORGIA,                 {'G','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 18,  0, 18,  0, 18,  0, 18, 18, 18, 18, 18,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_GUATEMALA,               {'G','T'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_HONDURAS,                {'H','N'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_HONG_KONG,               {'H','K'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23,  0, 23,  0, 23,  0, 23, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_HUNGARY,                 {'H','U'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 18,  0, 18,  0, 18,  0, 18,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_ICELAND,                 {'I','S'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_INDIA,                   {'I','N'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_INDONESIA,               {'I','D'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_IRAN,                    {'I','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_IRELAND,                 {'I','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_ITALY,                   {'I','T'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_ISRAEL,                  {'I','L'},  {   0,  0,  0,  0,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_JAPAN,                   {'J','P'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23,  0, 23,  0, 23,  0, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_JORDAN,                  {'J','O'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_KAZAKHSTAN,              {'K','Z'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_KUWAIT,                  {'K','W'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_LATVIA,                  {'L','V'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_LEBANON,                 {'L','B'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_LEICHTENSTEIN,           {'L','I'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 18,  0, 18,  0, 18,  0, 18,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_LITHUANIA,               {'L','T'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_LUXEMBURG,               {'L','U'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_MACAU,                   {'M','O'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23,  0, 23,  0, 23,  0, 23, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_MACEDONIA,               {'M','K'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_MALTA,                   {'M','T'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
+                                         ,  {  23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 16,  0, 16,  0, 16,  0, 16, 16, 16, 16, 16,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 16, 16, 16, 16,  0}  },
+{CCODE_MALAYSIA,                {'M','Y'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_MEXICO,                  {'M','X'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_MONACO,                  {'M','C'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 18,  0, 18,  0, 18,  0, 18, 18, 18, 18, 18,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_MOROCCO,                 {'M','A'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_NETHERLANDS,             {'N','L'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_NEW_ZEALAND,             {'N','Z'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23,  0, 23,  0, 23,  0, 23, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_NORTH_KOREA,             {'K','P'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23, 23, 23, 23,  0}  },
+{CCODE_NORWAY,                  {'N','O'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_OMAN,                    {'O','M'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_PAKISTAN,                {'P','K'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_PANAMA,                  {'P','A'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_PERU,                    {'P','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_PHILIPPINES,             {'P','H'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_POLAND,                  {'P','L'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_PORTUGAL,                {'P','T'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_PUERTO_RICO,             {'P','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_QATAR,                   {'Q','A'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_ROMANIA,                 {'R','O'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_RUSSIA,                  {'R','U'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_SAUDI_ARABIA,            {'S','A'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_SINGAPORE,               {'S','G'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20, 20, 20, 20, 20}  },
+{CCODE_SLOVAKIA,                {'S','K'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
+                                         ,  {  23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 16,  0, 16,  0, 16,  0, 16, 16, 16, 16, 16,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 16, 16, 16, 16,  0}  },
+{CCODE_SLOVENIA,                {'S','I'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_SOUTH_AFRICA,            {'Z','A'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_SOUTH_KOREA,             {'K','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23, 23, 23, 23,  0}  },
+{CCODE_SPAIN,                   {'E','S'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
+                                         ,  {  23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 16,  0, 16,  0, 16,  0, 16, 16, 16, 16, 16,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 16, 16, 16, 16,  0}  },
+{CCODE_SWEDEN,                  {'S','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_SWITZERLAND,             {'C','H'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 18,  0, 18,  0, 18,  0, 18,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_SYRIA,                   {'S','Y'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_TAIWAN,                  {'T','W'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17, 17, 17,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30,  0}  },
+{CCODE_THAILAND,                {'T','H'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23, 23, 23, 23,  0}  },
+{CCODE_TRINIDAD_TOBAGO,         {'T','T'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 18,  0, 18,  0, 18,  0, 18, 18, 18, 18, 18,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_TUNISIA,                 {'T','N'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_TURKEY,                  {'T','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_UK,                      {'G','B'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_UKRAINE,                 {'U','A'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_UNITED_ARAB_EMIRATES,    {'A','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_UNITED_STATES,           {'U','S'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_URUGUAY,                 {'U','Y'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23, 23, 23, 23,  0}  },
+{CCODE_UZBEKISTAN,              {'U','Z'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_VENEZUELA,               {'V','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23, 23, 23, 23,  0}  },
+{CCODE_VIETNAM,                 {'V','N'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_YEMEN,                   {'Y','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_ZIMBABWE,                {'Z','W'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_JAPAN_W52_W53,           {'J','J'},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_MAX,                     {'U','N'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  }
+/*                                              1   2   3   4   5   6   7   8   9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30  31  32  33  34  35  36  37  38  39  40  41  42  43  44  45  46  47  48  49  50  51  52  53  54  55  56  */
+};
+
+
+/*---------------------  Static Functions  --------------------------*/
+
+static
+VOID
+s_vCaculateOFDMRParameter(
+    IN  BYTE byRate,
+    IN  CARD_PHY_TYPE ePHYType,
+    OUT PBYTE pbyTxRate,
+    OUT PBYTE pbyRsvTime
+    );
+
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+
+
+/*---------------------  Export function  -------------------------*/
+/************************************************************************
+ * Country Channel Valid
+ *  Input:  CountryCode, ChannelNum
+ *          ChanneIndex is defined as VT3253 MAC channel:
+ *              1   = 2.4G channel 1
+ *              2   = 2.4G channel 2
+ *              ...
+ *              14  = 2.4G channel 14
+ *              15  = 4.9G channel 183
+ *              16  = 4.9G channel 184
+ *              .....
+ *  Output: TRUE if the specified 5GHz band is allowed to be used.
+            False otherwise.
+// 4.9G => Ch 183, 184, 185, 187, 188, 189, 192, 196 (Value:15 ~ 22)
+
+// 5G => Ch 7, 8, 9, 11, 12, 16, 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64,
+// 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 (Value 23 ~ 56)
+ ************************************************************************/
+//2008-8-4 <add> by chester
+BOOL
+ChannelValid(UINT CountryCode, UINT ChannelIndex)
+{
+    BOOL    bValid;
+
+    bValid = FALSE;
+    /*
+     * If Channel Index is invalid, return invalid
+     */
+    if ((ChannelIndex > CB_MAX_CHANNEL) ||
+        (ChannelIndex == 0))
+    {
+        bValid = FALSE;
+        goto exit;
+    }
+
+    bValid = sChannelTbl[ChannelIndex].bValid;
+
+exit:
+    return (bValid);
+
+} /* end ChannelValid */
+
+
+/*
+ * Description: Caculate TxRate and RsvTime fields for RSPINF in OFDM mode.
+ *
+ * Parameters:
+ *  In:
+ *      wRate           - Tx Rate
+ *      byPktType       - Tx Packet type
+ *  Out:
+ *      pbyTxRate       - pointer to RSPINF TxRate field
+ *      pbyRsvTime      - pointer to RSPINF RsvTime field
+ *
+ * Return Value: none
+ *
+ */
+static
+VOID
+s_vCaculateOFDMRParameter (
+    IN  BYTE byRate,
+    IN  CARD_PHY_TYPE ePHYType,
+    OUT PBYTE pbyTxRate,
+    OUT PBYTE pbyRsvTime
+    )
+{
+    switch (byRate) {
+    case RATE_6M :
+        if (ePHYType == PHY_TYPE_11A) {//5GHZ
+            *pbyTxRate = 0x9B;
+            *pbyRsvTime = 44;
+        }
+        else {
+            *pbyTxRate = 0x8B;
+            *pbyRsvTime = 50;
+        }
+        break;
+
+    case RATE_9M :
+        if (ePHYType == PHY_TYPE_11A) {//5GHZ
+            *pbyTxRate = 0x9F;
+            *pbyRsvTime = 36;
+        }
+        else {
+            *pbyTxRate = 0x8F;
+            *pbyRsvTime = 42;
+        }
+        break;
+
+   case RATE_12M :
+        if (ePHYType == PHY_TYPE_11A) {//5GHZ
+            *pbyTxRate = 0x9A;
+            *pbyRsvTime = 32;
+        }
+        else {
+            *pbyTxRate = 0x8A;
+            *pbyRsvTime = 38;
+        }
+        break;
+
+   case RATE_18M :
+        if (ePHYType == PHY_TYPE_11A) {//5GHZ
+            *pbyTxRate = 0x9E;
+            *pbyRsvTime = 28;
+        }
+        else {
+            *pbyTxRate = 0x8E;
+            *pbyRsvTime = 34;
+        }
+        break;
+
+    case RATE_36M :
+        if (ePHYType == PHY_TYPE_11A) {//5GHZ
+            *pbyTxRate = 0x9D;
+            *pbyRsvTime = 24;
+        }
+        else {
+            *pbyTxRate = 0x8D;
+            *pbyRsvTime = 30;
+        }
+        break;
+
+    case RATE_48M :
+        if (ePHYType == PHY_TYPE_11A) {//5GHZ
+            *pbyTxRate = 0x98;
+            *pbyRsvTime = 24;
+        }
+        else {
+            *pbyTxRate = 0x88;
+            *pbyRsvTime = 30;
+        }
+        break;
+
+    case RATE_54M :
+        if (ePHYType == PHY_TYPE_11A) {//5GHZ
+            *pbyTxRate = 0x9C;
+            *pbyRsvTime = 24;
+        }
+        else {
+            *pbyTxRate = 0x8C;
+            *pbyRsvTime = 30;
+        }
+        break;
+
+    case RATE_24M :
+    default :
+        if (ePHYType == PHY_TYPE_11A) {//5GHZ
+            *pbyTxRate = 0x99;
+            *pbyRsvTime = 28;
+        }
+        else {
+            *pbyTxRate = 0x89;
+            *pbyRsvTime = 34;
+        }
+        break;
+    }
+}
+
+
+
+/*
+ * Description: Set RSPINF
+ *
+ * Parameters:
+ *  In:
+ *      pDevice             - The adapter to be set
+ *  Out:
+ *      none
+ *
+ * Return Value: None.
+ *
+ */
+static
+VOID
+s_vSetRSPINF (PSDevice pDevice, CARD_PHY_TYPE ePHYType, PVOID pvSupportRateIEs, PVOID pvExtSupportRateIEs)
+{
+    BYTE  byServ = 0, bySignal = 0; // For CCK
+    WORD  wLen = 0;
+    BYTE  byTxRate = 0, byRsvTime = 0;    // For OFDM
+
+    //Set to Page1
+    MACvSelectPage1(pDevice->PortOffset);
+
+    //RSPINF_b_1
+    BBvCaculateParameter(pDevice,
+                         14,
+                         VNTWIFIbyGetACKTxRate(RATE_1M, pvSupportRateIEs, pvExtSupportRateIEs),
+                         PK_TYPE_11B,
+                         &wLen,
+                         &byServ,
+                         &bySignal
+    );
+
+    VNSvOutPortD(pDevice->PortOffset + MAC_REG_RSPINF_B_1, MAKEDWORD(wLen,MAKEWORD(bySignal,byServ)));
+    ///RSPINF_b_2
+    BBvCaculateParameter(pDevice,
+                         14,
+                         VNTWIFIbyGetACKTxRate(RATE_2M, pvSupportRateIEs, pvExtSupportRateIEs),
+                         PK_TYPE_11B,
+                         &wLen,
+                         &byServ,
+                         &bySignal
+    );
+
+    VNSvOutPortD(pDevice->PortOffset + MAC_REG_RSPINF_B_2, MAKEDWORD(wLen,MAKEWORD(bySignal,byServ)));
+    //RSPINF_b_5
+    BBvCaculateParameter(pDevice,
+                         14,
+                         VNTWIFIbyGetACKTxRate(RATE_5M, pvSupportRateIEs, pvExtSupportRateIEs),
+                         PK_TYPE_11B,
+                         &wLen,
+                         &byServ,
+                         &bySignal
+    );
+
+    VNSvOutPortD(pDevice->PortOffset + MAC_REG_RSPINF_B_5, MAKEDWORD(wLen,MAKEWORD(bySignal,byServ)));
+    //RSPINF_b_11
+    BBvCaculateParameter(pDevice,
+                         14,
+                         VNTWIFIbyGetACKTxRate(RATE_11M, pvSupportRateIEs, pvExtSupportRateIEs),
+                         PK_TYPE_11B,
+                         &wLen,
+                         &byServ,
+                         &bySignal
+    );
+
+    VNSvOutPortD(pDevice->PortOffset + MAC_REG_RSPINF_B_11, MAKEDWORD(wLen,MAKEWORD(bySignal,byServ)));
+    //RSPINF_a_6
+    s_vCaculateOFDMRParameter(RATE_6M,
+                              ePHYType,
+                              &byTxRate,
+                              &byRsvTime);
+    VNSvOutPortW(pDevice->PortOffset + MAC_REG_RSPINF_A_6, MAKEWORD(byTxRate,byRsvTime));
+    //RSPINF_a_9
+    s_vCaculateOFDMRParameter(RATE_9M,
+                              ePHYType,
+                              &byTxRate,
+                              &byRsvTime);
+    VNSvOutPortW(pDevice->PortOffset + MAC_REG_RSPINF_A_9, MAKEWORD(byTxRate,byRsvTime));
+    //RSPINF_a_12
+    s_vCaculateOFDMRParameter(RATE_12M,
+                              ePHYType,
+                              &byTxRate,
+                              &byRsvTime);
+    VNSvOutPortW(pDevice->PortOffset + MAC_REG_RSPINF_A_12, MAKEWORD(byTxRate,byRsvTime));
+    //RSPINF_a_18
+    s_vCaculateOFDMRParameter(RATE_18M,
+                              ePHYType,
+                              &byTxRate,
+                              &byRsvTime);
+    VNSvOutPortW(pDevice->PortOffset + MAC_REG_RSPINF_A_18, MAKEWORD(byTxRate,byRsvTime));
+    //RSPINF_a_24
+    s_vCaculateOFDMRParameter(RATE_24M,
+                              ePHYType,
+                              &byTxRate,
+                              &byRsvTime);
+    VNSvOutPortW(pDevice->PortOffset + MAC_REG_RSPINF_A_24, MAKEWORD(byTxRate,byRsvTime));
+    //RSPINF_a_36
+    s_vCaculateOFDMRParameter(
+                              VNTWIFIbyGetACKTxRate(RATE_36M, pvSupportRateIEs, pvExtSupportRateIEs),
+                              ePHYType,
+                              &byTxRate,
+                              &byRsvTime);
+    VNSvOutPortW(pDevice->PortOffset + MAC_REG_RSPINF_A_36, MAKEWORD(byTxRate,byRsvTime));
+    //RSPINF_a_48
+    s_vCaculateOFDMRParameter(
+                              VNTWIFIbyGetACKTxRate(RATE_48M, pvSupportRateIEs, pvExtSupportRateIEs),
+                              ePHYType,
+                              &byTxRate,
+                              &byRsvTime);
+    VNSvOutPortW(pDevice->PortOffset + MAC_REG_RSPINF_A_48, MAKEWORD(byTxRate,byRsvTime));
+    //RSPINF_a_54
+    s_vCaculateOFDMRParameter(
+                              VNTWIFIbyGetACKTxRate(RATE_54M, pvSupportRateIEs, pvExtSupportRateIEs),
+                              ePHYType,
+                              &byTxRate,
+                              &byRsvTime);
+    VNSvOutPortW(pDevice->PortOffset + MAC_REG_RSPINF_A_54, MAKEWORD(byTxRate,byRsvTime));
+    //RSPINF_a_72
+    VNSvOutPortW(pDevice->PortOffset + MAC_REG_RSPINF_A_72, MAKEWORD(byTxRate,byRsvTime));
+    //Set to Page0
+    MACvSelectPage0(pDevice->PortOffset);
+}
+
+
+
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+BYTE CARDbyGetChannelMapping (PVOID pDeviceHandler, BYTE byChannelNumber, CARD_PHY_TYPE ePhyType)
+{
+    UINT        ii;
+
+    if ((ePhyType == PHY_TYPE_11B) || (ePhyType == PHY_TYPE_11G)) {
+        return (byChannelNumber);
+    }
+
+    for(ii = (CB_MAX_CHANNEL_24G + 1); ii <= CB_MAX_CHANNEL; ) {
+        if (sChannelTbl[ii].byChannelNumber == byChannelNumber) {
+            return ((BYTE) ii);
+        }
+        ii++;
+    }
+    return (0);
+}
+
+
+BYTE CARDbyGetChannelNumber (PVOID pDeviceHandler, BYTE byChannelIndex)
+{
+//    PSDevice    pDevice = (PSDevice) pDeviceHandler;
+    return(sChannelTbl[byChannelIndex].byChannelNumber);
+}
+
+/*
+ * Description: Set NIC media channel
+ *
+ * Parameters:
+ *  In:
+ *      pDeviceHandler      - The adapter to be set
+ *      uConnectionChannel  - Channel to be set
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if succeeded; FALSE if failed.
+ *
+ */
+BOOL CARDbSetChannel (PVOID pDeviceHandler, UINT uConnectionChannel)
+{
+    PSDevice    pDevice = (PSDevice) pDeviceHandler;
+    BOOL        bResult = TRUE;
+
+
+    if (pDevice->byCurrentCh == uConnectionChannel) {
+        return bResult;
+    }
+
+    if (sChannelTbl[uConnectionChannel].bValid == FALSE) {
+        return (FALSE);
+    }
+
+    if ((uConnectionChannel > CB_MAX_CHANNEL_24G) &&
+        (pDevice->eCurrentPHYType != PHY_TYPE_11A)) {
+        CARDbSetPhyParameter(pDevice, PHY_TYPE_11A, 0, 0, NULL, NULL);
+    } else if ((uConnectionChannel <= CB_MAX_CHANNEL_24G) &&
+        (pDevice->eCurrentPHYType == PHY_TYPE_11A)) {
+        CARDbSetPhyParameter(pDevice, PHY_TYPE_11G, 0, 0, NULL, NULL);
+    }
+    // clear NAV
+    MACvRegBitsOn(pDevice->PortOffset, MAC_REG_MACCR, MACCR_CLRNAV);
+
+    //{{ RobertYu: 20041202
+    //// TX_PE will reserve 3 us for MAX2829 A mode only, it is for better TX throughput
+
+    if ( pDevice->byRFType == RF_AIROHA7230 )
+    {
+        RFbAL7230SelectChannelPostProcess(pDevice->PortOffset, pDevice->byCurrentCh, (BYTE)uConnectionChannel);
+    }
+    //}} RobertYu
+
+
+    pDevice->byCurrentCh = (BYTE)uConnectionChannel;
+    bResult &= RFbSelectChannel(pDevice->PortOffset, pDevice->byRFType, (BYTE)uConnectionChannel);
+
+    // Init Synthesizer Table
+    if (pDevice->bEnablePSMode == TRUE)
+        RFvWriteWakeProgSyn(pDevice->PortOffset, pDevice->byRFType, uConnectionChannel);
+
+
+    //DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"CARDbSetMediaChannel: %d\n", (BYTE)uConnectionChannel);
+    BBvSoftwareReset(pDevice->PortOffset);
+
+    if (pDevice->byLocalID > REV_ID_VT3253_B1) {
+        // set HW default power register
+        MACvSelectPage1(pDevice->PortOffset);
+        RFbSetPower(pDevice, RATE_1M, pDevice->byCurrentCh);
+        VNSvOutPortB(pDevice->PortOffset + MAC_REG_PWRCCK, pDevice->byCurPwr);
+        RFbSetPower(pDevice, RATE_6M, pDevice->byCurrentCh);
+        VNSvOutPortB(pDevice->PortOffset + MAC_REG_PWROFDM, pDevice->byCurPwr);
+        MACvSelectPage0(pDevice->PortOffset);
+    }
+
+    if (pDevice->eCurrentPHYType == PHY_TYPE_11B) {
+#ifdef	PLICE_DEBUG
+	//printk("Func:CARDbSetChannel:call RFbSetPower:11B\n");
+#endif
+        RFbSetPower(pDevice, RATE_1M, pDevice->byCurrentCh);
+    } else {
+#ifdef	PLICE_DEBUG
+	//printk("Func:CARDbSetChannel:call RFbSetPower\n");
+#endif
+		RFbSetPower(pDevice, RATE_6M, pDevice->byCurrentCh);
+    }
+
+    return(bResult);
+}
+
+
+
+/*
+ * Description: Card Send packet function
+ *
+ * Parameters:
+ *  In:
+ *      pDeviceHandler      - The adapter to be set
+ *      pPacket             - Packet buffer pointer
+ *      ePktType            - Packet type
+ *      uLength             - Packet length
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if succeeded; FALSE if failed.
+ *
+ */
+/*
+BOOL CARDbSendPacket (PVOID pDeviceHandler, PVOID pPacket, CARD_PKT_TYPE ePktType, UINT uLength)
+{
+    PSDevice    pDevice = (PSDevice) pDeviceHandler;
+    if (ePktType == PKT_TYPE_802_11_MNG) {
+        return TXbTD0Send(pDevice, pPacket, uLength);
+    } else if (ePktType == PKT_TYPE_802_11_BCN) {
+        return TXbBeaconSend(pDevice, pPacket, uLength);
+    } if (ePktType == PKT_TYPE_802_11_DATA) {
+        return TXbTD1Send(pDevice, pPacket, uLength);
+    }
+
+    return (TRUE);
+}
+*/
+
+
+/*
+ * Description: Get Card short preamble option value
+ *
+ * Parameters:
+ *  In:
+ *      pDevice             - The adapter to be set
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if short preamble; otherwise FALSE
+ *
+ */
+BOOL CARDbIsShortPreamble (PVOID pDeviceHandler)
+{
+    PSDevice    pDevice = (PSDevice) pDeviceHandler;
+    if (pDevice->byPreambleType == 0) {
+        return(FALSE);
+    }
+    return(TRUE);
+}
+
+/*
+ * Description: Get Card short slot time option value
+ *
+ * Parameters:
+ *  In:
+ *      pDevice             - The adapter to be set
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if short slot time; otherwise FALSE
+ *
+ */
+BOOL CARDbIsShorSlotTime (PVOID pDeviceHandler)
+{
+    PSDevice    pDevice = (PSDevice) pDeviceHandler;
+    return(pDevice->bShortSlotTime);
+}
+
+
+/*
+ * Description: Update IFS
+ *
+ * Parameters:
+ *  In:
+ *      pDevice             - The adapter to be set
+ *  Out:
+ *      none
+ *
+ * Return Value: None.
+ *
+ */
+BOOL CARDbSetPhyParameter (PVOID pDeviceHandler, CARD_PHY_TYPE ePHYType, WORD wCapInfo, BYTE byERPField, PVOID pvSupportRateIEs, PVOID pvExtSupportRateIEs)
+{
+    PSDevice    pDevice = (PSDevice) pDeviceHandler;
+    BYTE        byCWMaxMin = 0;
+    BYTE        bySlot = 0;
+    BYTE        bySIFS = 0;
+    BYTE        byDIFS = 0;
+    BYTE        byData;
+//    PWLAN_IE_SUPP_RATES pRates = NULL;
+    PWLAN_IE_SUPP_RATES pSupportRates = (PWLAN_IE_SUPP_RATES) pvSupportRateIEs;
+    PWLAN_IE_SUPP_RATES pExtSupportRates = (PWLAN_IE_SUPP_RATES) pvExtSupportRateIEs;
+
+
+    //Set SIFS, DIFS, EIFS, SlotTime, CwMin
+    if (ePHYType == PHY_TYPE_11A) {
+        if (pSupportRates == NULL) {
+            pSupportRates = (PWLAN_IE_SUPP_RATES) abyDefaultSuppRatesA;
+        }
+        if (pDevice->byRFType == RF_AIROHA7230) {
+            // AL7230 use single PAPE and connect to PAPE_2.4G
+            MACvSetBBType(pDevice->PortOffset, BB_TYPE_11G);
+            pDevice->abyBBVGA[0] = 0x20;
+            pDevice->abyBBVGA[2] = 0x10;
+            pDevice->abyBBVGA[3] = 0x10;
+            BBbReadEmbeded(pDevice->PortOffset, 0xE7, &byData);
+            if (byData == 0x1C) {
+                BBbWriteEmbeded(pDevice->PortOffset, 0xE7, pDevice->abyBBVGA[0]);
+            }
+        } else if (pDevice->byRFType == RF_UW2452) {
+            MACvSetBBType(pDevice->PortOffset, BB_TYPE_11A);
+            pDevice->abyBBVGA[0] = 0x18;
+            BBbReadEmbeded(pDevice->PortOffset, 0xE7, &byData);
+            if (byData == 0x14) {
+                BBbWriteEmbeded(pDevice->PortOffset, 0xE7, pDevice->abyBBVGA[0]);
+                BBbWriteEmbeded(pDevice->PortOffset, 0xE1, 0x57);
+            }
+        } else {
+            MACvSetBBType(pDevice->PortOffset, BB_TYPE_11A);
+        }
+        BBbWriteEmbeded(pDevice->PortOffset, 0x88, 0x03);
+        bySlot = C_SLOT_SHORT;
+        bySIFS = C_SIFS_A;
+        byDIFS = C_SIFS_A + 2*C_SLOT_SHORT;
+        byCWMaxMin = 0xA4;
+    } else if (ePHYType == PHY_TYPE_11B) {
+        if (pSupportRates == NULL) {
+            pSupportRates = (PWLAN_IE_SUPP_RATES) abyDefaultSuppRatesB;
+        }
+        MACvSetBBType(pDevice->PortOffset, BB_TYPE_11B);
+        if (pDevice->byRFType == RF_AIROHA7230) {
+            pDevice->abyBBVGA[0] = 0x1C;
+            pDevice->abyBBVGA[2] = 0x00;
+            pDevice->abyBBVGA[3] = 0x00;
+            BBbReadEmbeded(pDevice->PortOffset, 0xE7, &byData);
+            if (byData == 0x20) {
+                BBbWriteEmbeded(pDevice->PortOffset, 0xE7, pDevice->abyBBVGA[0]);
+            }
+        } else if (pDevice->byRFType == RF_UW2452) {
+            pDevice->abyBBVGA[0] = 0x14;
+            BBbReadEmbeded(pDevice->PortOffset, 0xE7, &byData);
+            if (byData == 0x18) {
+                BBbWriteEmbeded(pDevice->PortOffset, 0xE7, pDevice->abyBBVGA[0]);
+                BBbWriteEmbeded(pDevice->PortOffset, 0xE1, 0xD3);
+            }
+        }
+        BBbWriteEmbeded(pDevice->PortOffset, 0x88, 0x02);
+        bySlot = C_SLOT_LONG;
+        bySIFS = C_SIFS_BG;
+        byDIFS = C_SIFS_BG + 2*C_SLOT_LONG;
+        byCWMaxMin = 0xA5;
+    } else {// PK_TYPE_11GA & PK_TYPE_11GB
+        if (pSupportRates == NULL) {
+            pSupportRates = (PWLAN_IE_SUPP_RATES) abyDefaultSuppRatesG;
+            pExtSupportRates = (PWLAN_IE_SUPP_RATES) abyDefaultExtSuppRatesG;
+        }
+        MACvSetBBType(pDevice->PortOffset, BB_TYPE_11G);
+        if (pDevice->byRFType == RF_AIROHA7230) {
+            pDevice->abyBBVGA[0] = 0x1C;
+            pDevice->abyBBVGA[2] = 0x00;
+            pDevice->abyBBVGA[3] = 0x00;
+            BBbReadEmbeded(pDevice->PortOffset, 0xE7, &byData);
+            if (byData == 0x20) {
+                BBbWriteEmbeded(pDevice->PortOffset, 0xE7, pDevice->abyBBVGA[0]);
+            }
+        } else if (pDevice->byRFType == RF_UW2452) {
+            pDevice->abyBBVGA[0] = 0x14;
+            BBbReadEmbeded(pDevice->PortOffset, 0xE7, &byData);
+            if (byData == 0x18) {
+                BBbWriteEmbeded(pDevice->PortOffset, 0xE7, pDevice->abyBBVGA[0]);
+                BBbWriteEmbeded(pDevice->PortOffset, 0xE1, 0xD3);
+            }
+        }
+        BBbWriteEmbeded(pDevice->PortOffset, 0x88, 0x08);
+        bySIFS = C_SIFS_BG;
+        if(VNTWIFIbIsShortSlotTime(wCapInfo)) {
+            bySlot = C_SLOT_SHORT;
+            byDIFS = C_SIFS_BG + 2*C_SLOT_SHORT;
+        } else {
+            bySlot = C_SLOT_LONG;
+            byDIFS = C_SIFS_BG + 2*C_SLOT_LONG;
+	    }
+        if (VNTWIFIbyGetMaxSupportRate(pSupportRates, pExtSupportRates) > RATE_11M) {
+            byCWMaxMin = 0xA4;
+        } else {
+            byCWMaxMin = 0xA5;
+        }
+        if (pDevice->bProtectMode != VNTWIFIbIsProtectMode(byERPField)) {
+            pDevice->bProtectMode = VNTWIFIbIsProtectMode(byERPField);
+            if (pDevice->bProtectMode) {
+                MACvEnableProtectMD(pDevice->PortOffset);
+            } else {
+                MACvDisableProtectMD(pDevice->PortOffset);
+            }
+        }
+        if (pDevice->bBarkerPreambleMd != VNTWIFIbIsBarkerMode(byERPField)) {
+            pDevice->bBarkerPreambleMd = VNTWIFIbIsBarkerMode(byERPField);
+            if (pDevice->bBarkerPreambleMd) {
+                MACvEnableBarkerPreambleMd(pDevice->PortOffset);
+            } else {
+                MACvDisableBarkerPreambleMd(pDevice->PortOffset);
+            }
+        }
+    }
+
+    if (pDevice->byRFType == RF_RFMD2959) {
+        // bcs TX_PE will reserve 3 us
+        // hardware's processing time here is 2 us.
+        bySIFS -= 3;
+        byDIFS -= 3;
+    //{{ RobertYu: 20041202
+    //// TX_PE will reserve 3 us for MAX2829 A mode only, it is for better TX throughput
+    //// MAC will need 2 us to process, so the SIFS, DIFS can be shorter by 2 us.
+    }
+
+    if (pDevice->bySIFS != bySIFS) {
+        pDevice->bySIFS = bySIFS;
+        VNSvOutPortB(pDevice->PortOffset + MAC_REG_SIFS, pDevice->bySIFS);
+    }
+    if (pDevice->byDIFS != byDIFS) {
+        pDevice->byDIFS = byDIFS;
+        VNSvOutPortB(pDevice->PortOffset + MAC_REG_DIFS, pDevice->byDIFS);
+    }
+    if (pDevice->byEIFS != C_EIFS) {
+        pDevice->byEIFS = C_EIFS;
+        VNSvOutPortB(pDevice->PortOffset + MAC_REG_EIFS, pDevice->byEIFS);
+    }
+    if (pDevice->bySlot != bySlot) {
+        pDevice->bySlot = bySlot;
+        VNSvOutPortB(pDevice->PortOffset + MAC_REG_SLOT, pDevice->bySlot);
+        if (pDevice->bySlot == C_SLOT_SHORT) {
+            pDevice->bShortSlotTime = TRUE;
+        } else {
+            pDevice->bShortSlotTime = FALSE;
+        }
+        BBvSetShortSlotTime(pDevice);
+    }
+    if (pDevice->byCWMaxMin != byCWMaxMin) {
+        pDevice->byCWMaxMin = byCWMaxMin;
+        VNSvOutPortB(pDevice->PortOffset + MAC_REG_CWMAXMIN0, pDevice->byCWMaxMin);
+    }
+    if (VNTWIFIbIsShortPreamble(wCapInfo)) {
+        pDevice->byPreambleType = pDevice->byShortPreamble;
+    } else {
+        pDevice->byPreambleType = 0;
+    }
+    s_vSetRSPINF(pDevice, ePHYType, pSupportRates, pExtSupportRates);
+    pDevice->eCurrentPHYType = ePHYType;
+    // set for NDIS OID_802_11SUPPORTED_RATES
+    return (TRUE);
+}
+
+/*
+ * Description: Sync. TSF counter to BSS
+ *              Get TSF offset and write to HW
+ *
+ * Parameters:
+ *  In:
+ *      pDevice         - The adapter to be sync.
+ *      byRxRate        - data rate of receive beacon
+ *      qwBSSTimestamp  - Rx BCN's TSF
+ *      qwLocalTSF      - Local TSF
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+BOOL CARDbUpdateTSF (PVOID pDeviceHandler, BYTE byRxRate, QWORD qwBSSTimestamp, QWORD qwLocalTSF)
+{
+    PSDevice    pDevice = (PSDevice) pDeviceHandler;
+    QWORD       qwTSFOffset;
+
+    HIDWORD(qwTSFOffset) = 0;
+    LODWORD(qwTSFOffset) = 0;
+
+    if ((HIDWORD(qwBSSTimestamp) != HIDWORD(qwLocalTSF)) ||
+        (LODWORD(qwBSSTimestamp) != LODWORD(qwLocalTSF))) {
+        qwTSFOffset = CARDqGetTSFOffset(byRxRate, qwBSSTimestamp, qwLocalTSF);
+        // adjust TSF
+        // HW's TSF add TSF Offset reg
+        VNSvOutPortD(pDevice->PortOffset + MAC_REG_TSFOFST, LODWORD(qwTSFOffset));
+        VNSvOutPortD(pDevice->PortOffset + MAC_REG_TSFOFST + 4, HIDWORD(qwTSFOffset));
+        MACvRegBitsOn(pDevice->PortOffset, MAC_REG_TFTCTL, TFTCTL_TSFSYNCEN);
+    }
+    return(TRUE);
+}
+
+
+/*
+ * Description: Set NIC TSF counter for first Beacon time
+ *              Get NEXTTBTT from adjusted TSF and Beacon Interval
+ *
+ * Parameters:
+ *  In:
+ *      pDevice         - The adapter to be set.
+ *      wBeaconInterval - Beacon Interval
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if succeed; otherwise FALSE
+ *
+ */
+BOOL CARDbSetBeaconPeriod (PVOID pDeviceHandler, WORD wBeaconInterval)
+{
+    PSDevice    pDevice = (PSDevice) pDeviceHandler;
+    UINT        uBeaconInterval = 0;
+    UINT        uLowNextTBTT = 0;
+    UINT        uHighRemain = 0;
+    UINT        uLowRemain = 0;
+    QWORD       qwNextTBTT;
+
+    HIDWORD(qwNextTBTT) = 0;
+    LODWORD(qwNextTBTT) = 0;
+    CARDbGetCurrentTSF(pDevice->PortOffset, &qwNextTBTT); //Get Local TSF counter
+    uBeaconInterval = wBeaconInterval * 1024;
+    // Next TBTT = ((local_current_TSF / beacon_interval) + 1 ) * beacon_interval
+    uLowNextTBTT = (LODWORD(qwNextTBTT) >> 10) << 10;
+    uLowRemain = (uLowNextTBTT) % uBeaconInterval;
+    // high dword (mod) bcn
+    uHighRemain = (((0xffffffff % uBeaconInterval) + 1) * HIDWORD(qwNextTBTT))
+                  % uBeaconInterval;
+    uLowRemain = (uHighRemain + uLowRemain) % uBeaconInterval;
+    uLowRemain = uBeaconInterval - uLowRemain;
+
+    // check if carry when add one beacon interval
+    if ((~uLowNextTBTT) < uLowRemain) {
+        HIDWORD(qwNextTBTT) ++ ;
+    }
+    LODWORD(qwNextTBTT) = uLowNextTBTT + uLowRemain;
+
+    // set HW beacon interval
+    VNSvOutPortW(pDevice->PortOffset + MAC_REG_BI, wBeaconInterval);
+    pDevice->wBeaconInterval = wBeaconInterval;
+    // Set NextTBTT
+    VNSvOutPortD(pDevice->PortOffset + MAC_REG_NEXTTBTT, LODWORD(qwNextTBTT));
+    VNSvOutPortD(pDevice->PortOffset + MAC_REG_NEXTTBTT + 4, HIDWORD(qwNextTBTT));
+    MACvRegBitsOn(pDevice->PortOffset, MAC_REG_TFTCTL, TFTCTL_TBTTSYNCEN);
+
+    return(TRUE);
+}
+
+
+
+/*
+ * Description: Card Stop Hardware Tx
+ *
+ * Parameters:
+ *  In:
+ *      pDeviceHandler      - The adapter to be set
+ *      ePktType            - Packet type to stop
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if all data packet complete; otherwise FALSE.
+ *
+ */
+BOOL CARDbStopTxPacket (PVOID pDeviceHandler, CARD_PKT_TYPE ePktType)
+{
+    PSDevice    pDevice = (PSDevice) pDeviceHandler;
+
+
+    if (ePktType == PKT_TYPE_802_11_ALL) {
+        pDevice->bStopBeacon = TRUE;
+        pDevice->bStopTx0Pkt = TRUE;
+        pDevice->bStopDataPkt = TRUE;
+    } else if (ePktType == PKT_TYPE_802_11_BCN) {
+        pDevice->bStopBeacon = TRUE;
+    } else if (ePktType == PKT_TYPE_802_11_MNG) {
+        pDevice->bStopTx0Pkt = TRUE;
+    } else if (ePktType == PKT_TYPE_802_11_DATA) {
+        pDevice->bStopDataPkt = TRUE;
+    }
+
+    if (pDevice->bStopBeacon == TRUE) {
+        if (pDevice->bIsBeaconBufReadySet == TRUE) {
+            if (pDevice->cbBeaconBufReadySetCnt < WAIT_BEACON_TX_DOWN_TMO) {
+                pDevice->cbBeaconBufReadySetCnt ++;
+                return(FALSE);
+            }
+        }
+        pDevice->bIsBeaconBufReadySet = FALSE;
+        pDevice->cbBeaconBufReadySetCnt = 0;
+        MACvRegBitsOff(pDevice->PortOffset, MAC_REG_TCR, TCR_AUTOBCNTX);
+    }
+    // wait all TD0 complete
+    if (pDevice->bStopTx0Pkt == TRUE) {
+         if (pDevice->iTDUsed[TYPE_TXDMA0] != 0){
+            return(FALSE);
+        }
+    }
+    // wait all Data TD complete
+    if (pDevice->bStopDataPkt == TRUE) {
+        if (pDevice->iTDUsed[TYPE_AC0DMA] != 0){
+            return(FALSE);
+        }
+    }
+
+    return(TRUE);
+}
+
+
+/*
+ * Description: Card Start Hardware Tx
+ *
+ * Parameters:
+ *  In:
+ *      pDeviceHandler      - The adapter to be set
+ *      ePktType            - Packet type to start
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if success; FALSE if failed.
+ *
+ */
+BOOL CARDbStartTxPacket (PVOID pDeviceHandler, CARD_PKT_TYPE ePktType)
+{
+    PSDevice    pDevice = (PSDevice) pDeviceHandler;
+
+
+    if (ePktType == PKT_TYPE_802_11_ALL) {
+        pDevice->bStopBeacon = FALSE;
+        pDevice->bStopTx0Pkt = FALSE;
+        pDevice->bStopDataPkt = FALSE;
+    } else if (ePktType == PKT_TYPE_802_11_BCN) {
+        pDevice->bStopBeacon = FALSE;
+    } else if (ePktType == PKT_TYPE_802_11_MNG) {
+        pDevice->bStopTx0Pkt = FALSE;
+    } else if (ePktType == PKT_TYPE_802_11_DATA) {
+        pDevice->bStopDataPkt = FALSE;
+    }
+
+    if ((pDevice->bStopBeacon == FALSE) &&
+        (pDevice->bBeaconBufReady == TRUE) &&
+        (pDevice->eOPMode == OP_MODE_ADHOC)) {
+        MACvRegBitsOn(pDevice->PortOffset, MAC_REG_TCR, TCR_AUTOBCNTX);
+    }
+
+    return(TRUE);
+}
+
+
+
+/*
+ * Description: Card Set BSSID value
+ *
+ * Parameters:
+ *  In:
+ *      pDeviceHandler      - The adapter to be set
+ *      pbyBSSID            - pointer to BSSID field
+ *      bAdhoc              - flag to indicate IBSS
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if success; FALSE if failed.
+ *
+ */
+BOOL CARDbSetBSSID(PVOID pDeviceHandler, PBYTE pbyBSSID, CARD_OP_MODE eOPMode)
+{
+    PSDevice    pDevice = (PSDevice) pDeviceHandler;
+
+    MACvWriteBSSIDAddress(pDevice->PortOffset, pbyBSSID);
+    MEMvCopy(pDevice->abyBSSID, pbyBSSID, WLAN_BSSID_LEN);
+    if (eOPMode == OP_MODE_ADHOC) {
+        MACvRegBitsOn(pDevice->PortOffset, MAC_REG_HOSTCR, HOSTCR_ADHOC);
+    } else {
+        MACvRegBitsOff(pDevice->PortOffset, MAC_REG_HOSTCR, HOSTCR_ADHOC);
+    }
+    if (eOPMode == OP_MODE_AP) {
+        MACvRegBitsOn(pDevice->PortOffset, MAC_REG_HOSTCR, HOSTCR_AP);
+    } else {
+        MACvRegBitsOff(pDevice->PortOffset, MAC_REG_HOSTCR, HOSTCR_AP);
+    }
+    if (eOPMode == OP_MODE_UNKNOWN) {
+        MACvRegBitsOff(pDevice->PortOffset, MAC_REG_RCR, RCR_BSSID);
+        pDevice->bBSSIDFilter = FALSE;
+        pDevice->byRxMode &= ~RCR_BSSID;
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "wcmd: rx_mode = %x\n", pDevice->byRxMode );
+    } else {
+        if (IS_NULL_ADDRESS(pDevice->abyBSSID) == FALSE) {
+            MACvRegBitsOn(pDevice->PortOffset, MAC_REG_RCR, RCR_BSSID);
+            pDevice->bBSSIDFilter = TRUE;
+            pDevice->byRxMode |= RCR_BSSID;
+	    }
+	    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "wmgr: rx_mode = %x\n", pDevice->byRxMode );
+    }
+    // Adopt BSS state in Adapter Device Object
+    pDevice->eOPMode = eOPMode;
+    return(TRUE);
+}
+
+
+/*
+ * Description: Card indicate status
+ *
+ * Parameters:
+ *  In:
+ *      pDeviceHandler      - The adapter to be set
+ *      eStatus             - Status
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if success; FALSE if failed.
+ *
+ */
+
+
+
+
+/*
+ * Description: Save Assoc info. contain in assoc. response frame
+ *
+ * Parameters:
+ *  In:
+ *      pDevice             - The adapter to be set
+ *      wCapabilityInfo     - Capability information
+ *      wStatus             - Status code
+ *      wAID                - Assoc. ID
+ *      uLen                - Length of IEs
+ *      pbyIEs              - pointer to IEs
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if succeed; otherwise FALSE
+ *
+ */
+BOOL CARDbSetTxDataRate(
+    PVOID   pDeviceHandler,
+    WORD    wDataRate
+    )
+{
+    PSDevice    pDevice = (PSDevice) pDeviceHandler;
+
+    pDevice->wCurrentRate = wDataRate;
+    return(TRUE);
+}
+
+/*+
+ *
+ * Routine Description:
+ *      Consider to power down when no more packets to tx or rx.
+ *
+ * Parameters:
+ *  In:
+ *      pDevice             - The adapter to be set
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if power down success; otherwise FALSE
+ *
+-*/
+BOOL
+CARDbPowerDown(
+    PVOID   pDeviceHandler
+    )
+{
+    PSDevice        pDevice = (PSDevice)pDeviceHandler;
+    UINT            uIdx;
+
+    // check if already in Doze mode
+    if (MACbIsRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_PS))
+        return TRUE;
+
+    // Froce PSEN on
+    MACvRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_PSEN);
+
+    // check if all TD are empty,
+
+    for (uIdx = 0; uIdx < TYPE_MAXTD; uIdx ++) {
+        if (pDevice->iTDUsed[uIdx] != 0)
+            return FALSE;
+    }
+
+    MACvRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_GO2DOZE);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Go to Doze ZZZZZZZZZZZZZZZ\n");
+    return TRUE;
+}
+
+/*
+ * Description: Turn off Radio power
+ *
+ * Parameters:
+ *  In:
+ *      pDevice         - The adapter to be turned off
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if success; otherwise FALSE
+ *
+ */
+BOOL CARDbRadioPowerOff (PVOID pDeviceHandler)
+{
+    PSDevice    pDevice = (PSDevice) pDeviceHandler;
+    BOOL        bResult = TRUE;
+
+    if (pDevice->bRadioOff == TRUE)
+        return TRUE;
+
+
+    switch (pDevice->byRFType) {
+
+        case RF_RFMD2959:
+            MACvWordRegBitsOff(pDevice->PortOffset, MAC_REG_SOFTPWRCTL, SOFTPWRCTL_TXPEINV);
+            MACvWordRegBitsOn(pDevice->PortOffset, MAC_REG_SOFTPWRCTL, SOFTPWRCTL_SWPE1);
+            break;
+
+        case RF_AIROHA:
+        case RF_AL2230S:
+        case RF_AIROHA7230: //RobertYu:20050104
+            MACvWordRegBitsOff(pDevice->PortOffset, MAC_REG_SOFTPWRCTL, SOFTPWRCTL_SWPE2);
+            MACvWordRegBitsOff(pDevice->PortOffset, MAC_REG_SOFTPWRCTL, SOFTPWRCTL_SWPE3);
+            break;
+
+    }
+
+    MACvRegBitsOff(pDevice->PortOffset, MAC_REG_HOSTCR, HOSTCR_RXON);
+
+    BBvSetDeepSleep(pDevice->PortOffset, pDevice->byLocalID);
+
+    pDevice->bRadioOff = TRUE;
+     //2007-0409-03,<Add> by chester
+printk("chester power off\n");
+MACvRegBitsOn(pDevice->PortOffset, MAC_REG_GPIOCTL0, LED_ACTSET);  //LED issue
+    return bResult;
+}
+
+
+/*
+ * Description: Turn on Radio power
+ *
+ * Parameters:
+ *  In:
+ *      pDevice         - The adapter to be turned on
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if success; otherwise FALSE
+ *
+ */
+BOOL CARDbRadioPowerOn (PVOID pDeviceHandler)
+{
+    PSDevice    pDevice = (PSDevice) pDeviceHandler;
+    BOOL        bResult = TRUE;
+printk("chester power on\n");
+    if (pDevice->bRadioControlOff == TRUE){
+if (pDevice->bHWRadioOff == TRUE) printk("chester bHWRadioOff\n");
+if (pDevice->bRadioControlOff == TRUE) printk("chester bRadioControlOff\n");
+        return FALSE;}
+
+    if (pDevice->bRadioOff == FALSE)
+       {
+printk("chester pbRadioOff\n");
+return TRUE;}
+
+    BBvExitDeepSleep(pDevice->PortOffset, pDevice->byLocalID);
+
+    MACvRegBitsOn(pDevice->PortOffset, MAC_REG_HOSTCR, HOSTCR_RXON);
+
+    switch (pDevice->byRFType) {
+
+        case RF_RFMD2959:
+            MACvWordRegBitsOn(pDevice->PortOffset, MAC_REG_SOFTPWRCTL, SOFTPWRCTL_TXPEINV);
+            MACvWordRegBitsOff(pDevice->PortOffset, MAC_REG_SOFTPWRCTL, SOFTPWRCTL_SWPE1);
+            break;
+
+        case RF_AIROHA:
+        case RF_AL2230S:
+        case RF_AIROHA7230: //RobertYu:20050104
+            MACvWordRegBitsOn(pDevice->PortOffset, MAC_REG_SOFTPWRCTL, (SOFTPWRCTL_SWPE2 |
+                                                                        SOFTPWRCTL_SWPE3));
+            break;
+
+    }
+
+    pDevice->bRadioOff = FALSE;
+//  2007-0409-03,<Add> by chester
+printk("chester power on\n");
+MACvRegBitsOff(pDevice->PortOffset, MAC_REG_GPIOCTL0, LED_ACTSET); //LED issue
+    return bResult;
+}
+
+
+
+BOOL CARDbRemoveKey (PVOID pDeviceHandler, PBYTE pbyBSSID)
+{
+    PSDevice    pDevice = (PSDevice) pDeviceHandler;
+
+    KeybRemoveAllKey(&(pDevice->sKey), pbyBSSID, pDevice->PortOffset);
+    return (TRUE);
+}
+
+
+/*
+ *
+ * Description:
+ *    Add BSSID in PMKID Candidate list.
+ *
+ * Parameters:
+ *  In:
+ *      hDeviceContext - device structure point
+ *      pbyBSSID - BSSID address for adding
+ *      wRSNCap - BSS's RSN capability
+ *  Out:
+ *      none
+ *
+ * Return Value: none.
+ *
+-*/
+BOOL
+CARDbAdd_PMKID_Candidate (
+    IN PVOID            pDeviceHandler,
+    IN PBYTE            pbyBSSID,
+    IN BOOL             bRSNCapExist,
+    IN WORD             wRSNCap
+    )
+{
+    PSDevice            pDevice = (PSDevice) pDeviceHandler;
+    PPMKID_CANDIDATE    pCandidateList;
+    UINT                ii = 0;
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"bAdd_PMKID_Candidate START: (%d)\n", (int)pDevice->gsPMKIDCandidate.NumCandidates);
+
+    if (pDevice->gsPMKIDCandidate.NumCandidates >= MAX_PMKIDLIST) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"vFlush_PMKID_Candidate: 3\n");
+        ZERO_MEMORY(&pDevice->gsPMKIDCandidate, sizeof(SPMKIDCandidateEvent));
+    }
+
+    for (ii = 0; ii < 6; ii++) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"%02X ", *(pbyBSSID + ii));
+    }
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\n");
+
+
+    // Update Old Candidate
+    for (ii = 0; ii < pDevice->gsPMKIDCandidate.NumCandidates; ii++) {
+        pCandidateList = &pDevice->gsPMKIDCandidate.CandidateList[ii];
+        if (MEMEqualMemory(pCandidateList->BSSID, pbyBSSID, U_ETHER_ADDR_LEN)) {
+            if ((bRSNCapExist == TRUE) && (wRSNCap & BIT0)) {
+                pCandidateList->Flags |= NDIS_802_11_PMKID_CANDIDATE_PREAUTH_ENABLED;
+            } else {
+                pCandidateList->Flags &= ~(NDIS_802_11_PMKID_CANDIDATE_PREAUTH_ENABLED);
+            }
+            return TRUE;
+        }
+    }
+
+    // New Candidate
+    pCandidateList = &pDevice->gsPMKIDCandidate.CandidateList[pDevice->gsPMKIDCandidate.NumCandidates];
+    if ((bRSNCapExist == TRUE) && (wRSNCap & BIT0)) {
+        pCandidateList->Flags |= NDIS_802_11_PMKID_CANDIDATE_PREAUTH_ENABLED;
+    } else {
+        pCandidateList->Flags &= ~(NDIS_802_11_PMKID_CANDIDATE_PREAUTH_ENABLED);
+    }
+    MEMvCopy(pCandidateList->BSSID, pbyBSSID, U_ETHER_ADDR_LEN);
+    pDevice->gsPMKIDCandidate.NumCandidates++;
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"NumCandidates:%d\n", (int)pDevice->gsPMKIDCandidate.NumCandidates);
+    return TRUE;
+}
+
+PVOID
+CARDpGetCurrentAddress (
+    IN PVOID            pDeviceHandler
+    )
+{
+    PSDevice            pDevice = (PSDevice) pDeviceHandler;
+
+    return (pDevice->abyCurrentNetAddr);
+}
+
+
+
+VOID CARDvInitChannelTable (PVOID pDeviceHandler)
+{
+    PSDevice    pDevice = (PSDevice) pDeviceHandler;
+    BOOL        bMultiBand = FALSE;
+    UINT        ii;
+
+    for(ii=1;ii<=CARD_MAX_CHANNEL_TBL;ii++) {
+        sChannelTbl[ii].bValid = FALSE;
+    }
+
+    switch (pDevice->byRFType) {
+        case RF_RFMD2959 :
+        case RF_AIROHA :
+        case RF_AL2230S:
+        case RF_UW2451 :
+        case RF_VT3226 :
+	//		printk("chester-false\n");
+            bMultiBand = FALSE;
+            break;
+        case RF_AIROHA7230 :
+        case RF_UW2452 :
+        case RF_NOTHING :
+        default :
+            bMultiBand = TRUE;
+            break;
+    }
+
+    if ((pDevice->dwDiagRefCount != 0) ||
+        (pDevice->b11hEnable == TRUE)) {
+        if (bMultiBand == TRUE) {
+            for(ii=0;ii<CARD_MAX_CHANNEL_TBL;ii++) {
+                sChannelTbl[ii+1].bValid = TRUE;
+                pDevice->abyRegPwr[ii+1] = pDevice->abyOFDMDefaultPwr[ii+1];
+                pDevice->abyLocalPwr[ii+1] = pDevice->abyOFDMDefaultPwr[ii+1];
+            }
+            for(ii=0;ii<CHANNEL_MAX_24G;ii++) {
+                pDevice->abyRegPwr[ii+1] = pDevice->abyCCKDefaultPwr[ii+1];
+                pDevice->abyLocalPwr[ii+1] = pDevice->abyCCKDefaultPwr[ii+1];
+            }
+        } else {
+            for(ii=0;ii<CHANNEL_MAX_24G;ii++) {
+//2008-8-4 <add> by chester
+ if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] != 0) {
+                sChannelTbl[ii+1].bValid = TRUE;
+                pDevice->abyRegPwr[ii+1] = pDevice->abyCCKDefaultPwr[ii+1];
+                pDevice->abyLocalPwr[ii+1] = pDevice->abyCCKDefaultPwr[ii+1];
+ 	}
+            }
+        }
+    } else if (pDevice->byZoneType <= CCODE_MAX) {
+        if (bMultiBand == TRUE) {
+            for(ii=0;ii<CARD_MAX_CHANNEL_TBL;ii++) {
+                if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] != 0) {
+                    sChannelTbl[ii+1].bValid = TRUE;
+                    pDevice->abyRegPwr[ii+1] = ChannelRuleTab[pDevice->byZoneType].byPower[ii];
+                    pDevice->abyLocalPwr[ii+1] = ChannelRuleTab[pDevice->byZoneType].byPower[ii];
+                }
+            }
+        } else {
+            for(ii=0;ii<CHANNEL_MAX_24G;ii++) {
+                if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] != 0) {
+                    sChannelTbl[ii+1].bValid = TRUE;
+                    pDevice->abyRegPwr[ii+1] = ChannelRuleTab[pDevice->byZoneType].byPower[ii];
+                    pDevice->abyLocalPwr[ii+1] = ChannelRuleTab[pDevice->byZoneType].byPower[ii];
+                }
+            }
+        }
+    }
+ DEVICE_PRT(MSG_LEVEL_NOTICE, KERN_INFO"Zone=[%d][%c][%c]!!\n",pDevice->byZoneType,ChannelRuleTab[pDevice->byZoneType].chCountryCode[0],ChannelRuleTab[pDevice->byZoneType].chCountryCode[1]);
+    for(ii=0;ii<CARD_MAX_CHANNEL_TBL;ii++) {
+        if (pDevice->abyRegPwr[ii+1] == 0) {
+            pDevice->abyRegPwr[ii+1] = pDevice->abyOFDMDefaultPwr[ii+1];
+        }
+        if (pDevice->abyLocalPwr[ii+1] == 0) {
+            pDevice->abyLocalPwr[ii+1] = pDevice->abyOFDMDefaultPwr[ii+1];
+        }
+    }
+}
+
+
+
+/*
+ *
+ * Description:
+ *    Start Spectrum Measure defined in 802.11h
+ *
+ * Parameters:
+ *  In:
+ *      hDeviceContext - device structure point
+ *  Out:
+ *      none
+ *
+ * Return Value: none.
+ *
+-*/
+BOOL
+CARDbStartMeasure (
+    IN PVOID            pDeviceHandler,
+    IN PVOID            pvMeasureEIDs,
+    IN UINT             uNumOfMeasureEIDs
+    )
+{
+    PSDevice                pDevice = (PSDevice) pDeviceHandler;
+    PWLAN_IE_MEASURE_REQ    pEID = (PWLAN_IE_MEASURE_REQ) pvMeasureEIDs;
+    QWORD                   qwCurrTSF;
+    QWORD                   qwStartTSF;
+    BOOL                    bExpired = TRUE;
+    WORD                    wDuration = 0;
+
+    if ((pEID == NULL) ||
+        (uNumOfMeasureEIDs == 0)) {
+        return (TRUE);
+    }
+    CARDbGetCurrentTSF(pDevice->PortOffset, &qwCurrTSF);
+    if (pDevice->bMeasureInProgress == TRUE) {
+        pDevice->bMeasureInProgress = FALSE;
+        VNSvOutPortB(pDevice->PortOffset + MAC_REG_RCR, pDevice->byOrgRCR);
+        MACvSelectPage1(pDevice->PortOffset);
+        VNSvOutPortD(pDevice->PortOffset + MAC_REG_MAR0, pDevice->dwOrgMAR0);
+        VNSvOutPortD(pDevice->PortOffset + MAC_REG_MAR4, pDevice->dwOrgMAR4);
+        // clear measure control
+        MACvRegBitsOff(pDevice->PortOffset, MAC_REG_MSRCTL, MSRCTL_EN);
+        MACvSelectPage0(pDevice->PortOffset);
+        CARDbSetChannel(pDevice, pDevice->byOrgChannel);
+        MACvSelectPage1(pDevice->PortOffset);
+        MACvRegBitsOn(pDevice->PortOffset, MAC_REG_MSRCTL+1, MSRCTL1_TXPAUSE);
+        MACvSelectPage0(pDevice->PortOffset);
+    }
+    pDevice->uNumOfMeasureEIDs = uNumOfMeasureEIDs;
+
+    do {
+        pDevice->pCurrMeasureEID = pEID;
+        pEID++;
+        pDevice->uNumOfMeasureEIDs--;
+
+        if (pDevice->byLocalID > REV_ID_VT3253_B1) {
+            HIDWORD(qwStartTSF) = HIDWORD(*((PQWORD) (pDevice->pCurrMeasureEID->sReq.abyStartTime)));
+            LODWORD(qwStartTSF) = LODWORD(*((PQWORD) (pDevice->pCurrMeasureEID->sReq.abyStartTime)));
+            wDuration = *((PWORD) (pDevice->pCurrMeasureEID->sReq.abyDuration));
+            wDuration += 1; // 1 TU for channel switching
+
+            if ((LODWORD(qwStartTSF) == 0) && (HIDWORD(qwStartTSF) == 0)) {
+                // start imediately by setting start TSF == current TSF + 2 TU
+                LODWORD(qwStartTSF) = LODWORD(qwCurrTSF) + 2048;
+                HIDWORD(qwStartTSF) = HIDWORD(qwCurrTSF);
+                if (LODWORD(qwCurrTSF) > LODWORD(qwStartTSF)) {
+                    HIDWORD(qwStartTSF)++;
+                }
+                bExpired = FALSE;
+                break;
+            } else {
+                // start at setting start TSF - 1TU(for channel switching)
+                if (LODWORD(qwStartTSF) < 1024) {
+                    HIDWORD(qwStartTSF)--;
+                }
+                LODWORD(qwStartTSF) -= 1024;
+            }
+
+            if ((HIDWORD(qwCurrTSF) < HIDWORD(qwStartTSF)) ||
+                ((HIDWORD(qwCurrTSF) == HIDWORD(qwStartTSF)) &&
+                (LODWORD(qwCurrTSF) < LODWORD(qwStartTSF)))
+                ) {
+                bExpired = FALSE;
+                break;
+            }
+            VNTWIFIbMeasureReport(  pDevice->pMgmt,
+                                    FALSE,
+                                    pDevice->pCurrMeasureEID,
+                                    MEASURE_MODE_LATE,
+                                    pDevice->byBasicMap,
+                                    pDevice->byCCAFraction,
+                                    pDevice->abyRPIs
+                                    );
+        } else {
+            // hardware do not support measure
+            VNTWIFIbMeasureReport(  pDevice->pMgmt,
+                                    FALSE,
+                                    pDevice->pCurrMeasureEID,
+                                    MEASURE_MODE_INCAPABLE,
+                                    pDevice->byBasicMap,
+                                    pDevice->byCCAFraction,
+                                    pDevice->abyRPIs
+                                    );
+        }
+    } while (pDevice->uNumOfMeasureEIDs != 0);
+
+    if (bExpired == FALSE) {
+        MACvSelectPage1(pDevice->PortOffset);
+        VNSvOutPortD(pDevice->PortOffset + MAC_REG_MSRSTART, LODWORD(qwStartTSF));
+        VNSvOutPortD(pDevice->PortOffset + MAC_REG_MSRSTART + 4, HIDWORD(qwStartTSF));
+        VNSvOutPortW(pDevice->PortOffset + MAC_REG_MSRDURATION, wDuration);
+        MACvRegBitsOn(pDevice->PortOffset, MAC_REG_MSRCTL, MSRCTL_EN);
+        MACvSelectPage0(pDevice->PortOffset);
+    } else {
+        // all measure start time expired we should complete action
+        VNTWIFIbMeasureReport(  pDevice->pMgmt,
+                                TRUE,
+                                NULL,
+                                0,
+                                pDevice->byBasicMap,
+                                pDevice->byCCAFraction,
+                                pDevice->abyRPIs
+                                );
+    }
+    return (TRUE);
+}
+
+
+/*
+ *
+ * Description:
+ *    Do Channel Switch defined in 802.11h
+ *
+ * Parameters:
+ *  In:
+ *      hDeviceContext - device structure point
+ *  Out:
+ *      none
+ *
+ * Return Value: none.
+ *
+-*/
+BOOL
+CARDbChannelSwitch (
+    IN PVOID            pDeviceHandler,
+    IN BYTE             byMode,
+    IN BYTE             byNewChannel,
+    IN BYTE             byCount
+    )
+{
+    PSDevice    pDevice = (PSDevice) pDeviceHandler;
+    BOOL        bResult = TRUE;
+
+    if (byCount == 0) {
+        bResult = CARDbSetChannel(pDevice, byNewChannel);
+        VNTWIFIbChannelSwitch(pDevice->pMgmt, byNewChannel);
+        MACvSelectPage1(pDevice->PortOffset);
+        MACvRegBitsOn(pDevice->PortOffset, MAC_REG_MSRCTL+1, MSRCTL1_TXPAUSE);
+        MACvSelectPage0(pDevice->PortOffset);
+        return(bResult);
+    }
+    pDevice->byChannelSwitchCount = byCount;
+    pDevice->byNewChannel = byNewChannel;
+    pDevice->bChannelSwitch = TRUE;
+    if (byMode == 1) {
+        bResult=CARDbStopTxPacket(pDevice, PKT_TYPE_802_11_ALL);
+    }
+    return (bResult);
+}
+
+
+/*
+ *
+ * Description:
+ *    Handle Quiet EID defined in 802.11h
+ *
+ * Parameters:
+ *  In:
+ *      hDeviceContext - device structure point
+ *  Out:
+ *      none
+ *
+ * Return Value: none.
+ *
+-*/
+BOOL
+CARDbSetQuiet (
+    IN PVOID            pDeviceHandler,
+    IN BOOL             bResetQuiet,
+    IN BYTE             byQuietCount,
+    IN BYTE             byQuietPeriod,
+    IN WORD             wQuietDuration,
+    IN WORD             wQuietOffset
+    )
+{
+    PSDevice    pDevice = (PSDevice) pDeviceHandler;
+    UINT        ii = 0;
+
+    if (bResetQuiet == TRUE) {
+        MACvRegBitsOff(pDevice->PortOffset, MAC_REG_MSRCTL, (MSRCTL_QUIETTXCHK | MSRCTL_QUIETEN));
+        for(ii=0;ii<MAX_QUIET_COUNT;ii++) {
+            pDevice->sQuiet[ii].bEnable = FALSE;
+        }
+        pDevice->uQuietEnqueue = 0;
+        pDevice->bEnableFirstQuiet = FALSE;
+        pDevice->bQuietEnable = FALSE;
+        pDevice->byQuietStartCount = byQuietCount;
+    }
+    if (pDevice->sQuiet[pDevice->uQuietEnqueue].bEnable == FALSE) {
+        pDevice->sQuiet[pDevice->uQuietEnqueue].bEnable = TRUE;
+        pDevice->sQuiet[pDevice->uQuietEnqueue].byPeriod = byQuietPeriod;
+        pDevice->sQuiet[pDevice->uQuietEnqueue].wDuration = wQuietDuration;
+        pDevice->sQuiet[pDevice->uQuietEnqueue].dwStartTime = (DWORD) byQuietCount;
+        pDevice->sQuiet[pDevice->uQuietEnqueue].dwStartTime *= pDevice->wBeaconInterval;
+        pDevice->sQuiet[pDevice->uQuietEnqueue].dwStartTime += wQuietOffset;
+        pDevice->uQuietEnqueue++;
+        pDevice->uQuietEnqueue %= MAX_QUIET_COUNT;
+        if (pDevice->byQuietStartCount < byQuietCount) {
+            pDevice->byQuietStartCount = byQuietCount;
+        }
+    } else {
+        // we can not handle Quiet EID more
+    }
+    return (TRUE);
+}
+
+
+/*
+ *
+ * Description:
+ *    Do Quiet, It will called by either ISR (after start) or VNTWIFI (before start) so do not need SPINLOCK
+ *
+ * Parameters:
+ *  In:
+ *      hDeviceContext - device structure point
+ *  Out:
+ *      none
+ *
+ * Return Value: none.
+ *
+-*/
+BOOL
+CARDbStartQuiet (
+    IN PVOID            pDeviceHandler
+    )
+{
+    PSDevice    pDevice = (PSDevice) pDeviceHandler;
+    UINT        ii = 0;
+    DWORD       dwStartTime = 0xFFFFFFFF;
+    UINT        uCurrentQuietIndex = 0;
+    DWORD       dwNextTime = 0;
+    DWORD       dwGap = 0;
+    DWORD       dwDuration = 0;
+
+    for(ii=0;ii<MAX_QUIET_COUNT;ii++) {
+        if ((pDevice->sQuiet[ii].bEnable == TRUE) &&
+            (dwStartTime > pDevice->sQuiet[ii].dwStartTime)) {
+            dwStartTime = pDevice->sQuiet[ii].dwStartTime;
+            uCurrentQuietIndex = ii;
+        }
+    }
+    if (dwStartTime == 0xFFFFFFFF) {
+        // no more quiet
+        pDevice->bQuietEnable = FALSE;
+        MACvRegBitsOff(pDevice->PortOffset, MAC_REG_MSRCTL, (MSRCTL_QUIETTXCHK | MSRCTL_QUIETEN));
+    } else {
+        if (pDevice->bQuietEnable == FALSE) {
+            // first quiet
+            pDevice->byQuietStartCount--;
+            dwNextTime = pDevice->sQuiet[uCurrentQuietIndex].dwStartTime;
+            dwNextTime %= pDevice->wBeaconInterval;
+            MACvSelectPage1(pDevice->PortOffset);
+            VNSvOutPortW(pDevice->PortOffset + MAC_REG_QUIETINIT, (WORD) dwNextTime);
+            VNSvOutPortW(pDevice->PortOffset + MAC_REG_QUIETDUR, (WORD) pDevice->sQuiet[uCurrentQuietIndex].wDuration);
+            if (pDevice->byQuietStartCount == 0) {
+                pDevice->bEnableFirstQuiet = FALSE;
+                MACvRegBitsOn(pDevice->PortOffset, MAC_REG_MSRCTL, (MSRCTL_QUIETTXCHK | MSRCTL_QUIETEN));
+            } else {
+                pDevice->bEnableFirstQuiet = TRUE;
+            }
+            MACvSelectPage0(pDevice->PortOffset);
+        } else {
+            if (pDevice->dwCurrentQuietEndTime > pDevice->sQuiet[uCurrentQuietIndex].dwStartTime) {
+                // overlap with previous Quiet
+                dwGap =  pDevice->dwCurrentQuietEndTime - pDevice->sQuiet[uCurrentQuietIndex].dwStartTime;
+                if (dwGap >= pDevice->sQuiet[uCurrentQuietIndex].wDuration) {
+                    // return FALSE to indicate next quiet expired, should call this function again
+                    return (FALSE);
+                }
+                dwDuration = pDevice->sQuiet[uCurrentQuietIndex].wDuration - dwGap;
+                dwGap = 0;
+            } else {
+                dwGap = pDevice->sQuiet[uCurrentQuietIndex].dwStartTime - pDevice->dwCurrentQuietEndTime;
+                dwDuration = pDevice->sQuiet[uCurrentQuietIndex].wDuration;
+            }
+            // set GAP and Next duration
+            MACvSelectPage1(pDevice->PortOffset);
+            VNSvOutPortW(pDevice->PortOffset + MAC_REG_QUIETGAP, (WORD) dwGap);
+            VNSvOutPortW(pDevice->PortOffset + MAC_REG_QUIETDUR, (WORD) dwDuration);
+            MACvRegBitsOn(pDevice->PortOffset, MAC_REG_MSRCTL, MSRCTL_QUIETRPT);
+            MACvSelectPage0(pDevice->PortOffset);
+        }
+        pDevice->bQuietEnable = TRUE;
+        pDevice->dwCurrentQuietEndTime = pDevice->sQuiet[uCurrentQuietIndex].dwStartTime;
+        pDevice->dwCurrentQuietEndTime += pDevice->sQuiet[uCurrentQuietIndex].wDuration;
+        if (pDevice->sQuiet[uCurrentQuietIndex].byPeriod == 0) {
+            // not period disable current quiet element
+            pDevice->sQuiet[uCurrentQuietIndex].bEnable = FALSE;
+        } else {
+            // set next period start time
+            dwNextTime = (DWORD) pDevice->sQuiet[uCurrentQuietIndex].byPeriod;
+            dwNextTime *= pDevice->wBeaconInterval;
+            pDevice->sQuiet[uCurrentQuietIndex].dwStartTime = dwNextTime;
+        }
+        if (pDevice->dwCurrentQuietEndTime > 0x80010000) {
+            // decreament all time to avoid wrap around
+            for(ii=0;ii<MAX_QUIET_COUNT;ii++) {
+                if (pDevice->sQuiet[ii].bEnable == TRUE) {
+                    pDevice->sQuiet[ii].dwStartTime -= 0x80000000;
+                }
+            }
+            pDevice->dwCurrentQuietEndTime -= 0x80000000;
+        }
+    }
+    return (TRUE);
+}
+
+
+/*
+ *
+ * Description:
+ *    Set Channel Info of Country
+ *
+ * Parameters:
+ *  In:
+ *      hDeviceContext - device structure point
+ *  Out:
+ *      none
+ *
+ * Return Value: none.
+ *
+-*/
+VOID
+CARDvSetCountryInfo (
+    IN PVOID            pDeviceHandler,
+    IN CARD_PHY_TYPE    ePHYType,
+    IN PVOID            pIE
+    )
+{
+    PSDevice            pDevice = (PSDevice) pDeviceHandler;
+    UINT                ii = 0;
+    UINT                uu = 0;
+    UINT                step = 0;
+    UINT                uNumOfCountryInfo = 0;
+    BYTE                byCh = 0;
+    PWLAN_IE_COUNTRY    pIE_Country = (PWLAN_IE_COUNTRY) pIE;
+
+
+    uNumOfCountryInfo = (pIE_Country->len - 3);
+    uNumOfCountryInfo /= 3;
+
+    if (ePHYType == PHY_TYPE_11A) {
+        pDevice->bCountryInfo5G = TRUE;
+        for(ii=CB_MAX_CHANNEL_24G+1;ii<=CARD_MAX_CHANNEL_TBL;ii++) {
+            sChannelTbl[ii].bValid = FALSE;
+        }
+        step = 4;
+    } else {
+        pDevice->bCountryInfo24G = TRUE;
+        for(ii=1;ii<=CB_MAX_CHANNEL_24G;ii++) {
+            sChannelTbl[ii].bValid = FALSE;
+        }
+        step = 1;
+    }
+    pDevice->abyCountryCode[0] = pIE_Country->abyCountryString[0];
+    pDevice->abyCountryCode[1] = pIE_Country->abyCountryString[1];
+    pDevice->abyCountryCode[2] = pIE_Country->abyCountryString[2];
+
+    for(ii=0;ii<uNumOfCountryInfo;ii++) {
+        for(uu=0;uu<pIE_Country->abyCountryInfo[ii*3+1];uu++) {
+            byCh = CARDbyGetChannelMapping(pDevice, (BYTE)(pIE_Country->abyCountryInfo[ii*3]+step*uu), ePHYType);
+            sChannelTbl[byCh].bValid = TRUE;
+            pDevice->abyRegPwr[byCh] = pIE_Country->abyCountryInfo[ii*3+2];
+        }
+    }
+}
+
+/*
+ *
+ * Description:
+ *    Set Local Power Constraint
+ *
+ * Parameters:
+ *  In:
+ *      hDeviceContext - device structure point
+ *  Out:
+ *      none
+ *
+ * Return Value: none.
+ *
+-*/
+VOID
+CARDvSetPowerConstraint (
+    IN PVOID            pDeviceHandler,
+    IN BYTE             byChannel,
+    IN I8               byPower
+    )
+{
+    PSDevice    pDevice = (PSDevice) pDeviceHandler;
+
+    if (byChannel > CB_MAX_CHANNEL_24G) {
+        if (pDevice->bCountryInfo5G == TRUE) {
+            pDevice->abyLocalPwr[byChannel] = pDevice->abyRegPwr[byChannel] - byPower;
+        }
+    } else {
+        if (pDevice->bCountryInfo24G == TRUE) {
+            pDevice->abyLocalPwr[byChannel] = pDevice->abyRegPwr[byChannel] - byPower;
+        }
+    }
+}
+
+
+/*
+ *
+ * Description:
+ *    Set Local Power Constraint
+ *
+ * Parameters:
+ *  In:
+ *      hDeviceContext - device structure point
+ *  Out:
+ *      none
+ *
+ * Return Value: none.
+ *
+-*/
+VOID
+CARDvGetPowerCapability (
+    IN PVOID            pDeviceHandler,
+    OUT PBYTE           pbyMinPower,
+    OUT PBYTE           pbyMaxPower
+    )
+{
+    PSDevice    pDevice = (PSDevice) pDeviceHandler;
+    BYTE        byDec = 0;
+
+    *pbyMaxPower = pDevice->abyOFDMDefaultPwr[pDevice->byCurrentCh];
+    byDec = pDevice->abyOFDMPwrTbl[pDevice->byCurrentCh];
+    if (pDevice->byRFType == RF_UW2452) {
+        byDec *= 3;
+        byDec >>= 1;
+    } else {
+        byDec <<= 1;
+    }
+    *pbyMinPower = pDevice->abyOFDMDefaultPwr[pDevice->byCurrentCh] - byDec;
+}
+
+
+/*
+ *
+ * Description:
+ *    Set Support Channels IE defined in 802.11h
+ *
+ * Parameters:
+ *  In:
+ *      hDeviceContext - device structure point
+ *  Out:
+ *      none
+ *
+ * Return Value: none.
+ *
+-*/
+BYTE
+CARDbySetSupportChannels (
+    IN PVOID            pDeviceHandler,
+    IN OUT PBYTE        pbyIEs
+    )
+{
+    PSDevice            pDevice = (PSDevice) pDeviceHandler;
+    UINT                ii;
+    BYTE                byCount;
+    PWLAN_IE_SUPP_CH    pIE = (PWLAN_IE_SUPP_CH) pbyIEs;
+    PBYTE               pbyChTupple;
+    BYTE                byLen = 0;
+
+
+    pIE->byElementID = WLAN_EID_SUPP_CH;
+    pIE->len = 0;
+    pbyChTupple = pIE->abyChannelTuple;
+    byLen = 2;
+    // lower band
+    byCount = 0;
+    if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[28] == TRUE) {
+        for (ii=28;ii<36;ii+=2) {
+            if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] == TRUE) {
+                byCount++;
+            }
+        }
+        *pbyChTupple++ = 34;
+        *pbyChTupple++ = byCount;
+        byLen += 2;
+    } else if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[29] == TRUE) {
+        for (ii=29;ii<36;ii+=2) {
+            if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] == TRUE) {
+                byCount++;
+            }
+        }
+        *pbyChTupple++ = 36;
+        *pbyChTupple++ = byCount;
+        byLen += 2;
+    }
+    // middle band
+    byCount = 0;
+    if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[36] == TRUE) {
+        for (ii=36;ii<40;ii++) {
+            if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] == TRUE) {
+                byCount++;
+            }
+        }
+        *pbyChTupple++ = 52;
+        *pbyChTupple++ = byCount;
+        byLen += 2;
+    }
+    // higher band
+    byCount = 0;
+    if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[40] == TRUE) {
+        for (ii=40;ii<51;ii++) {
+            if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] == TRUE) {
+                byCount++;
+            }
+        }
+        *pbyChTupple++ = 100;
+        *pbyChTupple++ = byCount;
+        byLen += 2;
+    } else if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[51] == TRUE) {
+        for (ii=51;ii<56;ii++) {
+            if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] == TRUE) {
+                byCount++;
+            }
+        }
+        *pbyChTupple++ = 149;
+        *pbyChTupple++ = byCount;
+        byLen += 2;
+    }
+    pIE->len += (byLen - 2);
+    return (byLen);
+}
+
+
+/*
+ *
+ * Description:
+ *    Get Current Tx Power
+ *
+ * Parameters:
+ *  In:
+ *      hDeviceContext - device structure point
+ *  Out:
+ *      none
+ *
+ * Return Value: none.
+ *
+-*/
+I8
+CARDbyGetTransmitPower (
+    IN PVOID            pDeviceHandler
+    )
+{
+    PSDevice    pDevice = (PSDevice) pDeviceHandler;
+
+    return (pDevice->byCurPwrdBm);
+}
+
+
+BOOL
+CARDbChannelGetList (
+    IN  UINT       uCountryCodeIdx,
+    OUT PBYTE      pbyChannelTable
+    )
+{
+    if (uCountryCodeIdx >= CCODE_MAX) {
+        return (FALSE);
+    }
+    MEMvCopy(pbyChannelTable, ChannelRuleTab[uCountryCodeIdx].bChannelIdxList, CB_MAX_CHANNEL);
+    return (TRUE);
+}
+
+
+VOID
+CARDvSetCountryIE(
+    IN PVOID        pDeviceHandler,
+    IN PVOID        pIE
+    )
+{
+    PSDevice            pDevice = (PSDevice) pDeviceHandler;
+    UINT                ii;
+    PWLAN_IE_COUNTRY    pIECountry = (PWLAN_IE_COUNTRY) pIE;
+
+    pIECountry->byElementID = WLAN_EID_COUNTRY;
+    pIECountry->len = 0;
+    pIECountry->abyCountryString[0] = ChannelRuleTab[pDevice->byZoneType].chCountryCode[0];
+    pIECountry->abyCountryString[1] = ChannelRuleTab[pDevice->byZoneType].chCountryCode[1];
+    pIECountry->abyCountryString[2] = ' ';
+    for (ii = CB_MAX_CHANNEL_24G; ii < CB_MAX_CHANNEL; ii++ ) {
+        if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] != 0) {
+            pIECountry->abyCountryInfo[pIECountry->len++] = sChannelTbl[ii+1].byChannelNumber;
+            pIECountry->abyCountryInfo[pIECountry->len++] = 1;
+            pIECountry->abyCountryInfo[pIECountry->len++] = ChannelRuleTab[pDevice->byZoneType].byPower[ii];
+        }
+    }
+    pIECountry->len += 3;
+}
+
+
+BOOL
+CARDbGetChannelMapInfo(
+    IN PVOID        pDeviceHandler,
+    IN UINT         uChannelIndex,
+    OUT PBYTE       pbyChannelNumber,
+    OUT PBYTE       pbyMap
+    )
+{
+//    PSDevice            pDevice = (PSDevice) pDeviceHandler;
+
+    if (uChannelIndex > CB_MAX_CHANNEL) {
+        return FALSE;
+    }
+    *pbyChannelNumber = sChannelTbl[uChannelIndex].byChannelNumber;
+    *pbyMap = sChannelTbl[uChannelIndex].byMAP;
+    return sChannelTbl[uChannelIndex].bValid;
+}
+
+
+VOID
+CARDvSetChannelMapInfo(
+    IN PVOID        pDeviceHandler,
+    IN UINT         uChannelIndex,
+    IN BYTE         byMap
+    )
+{
+//    PSDevice            pDevice = (PSDevice) pDeviceHandler;
+
+    if (uChannelIndex > CB_MAX_CHANNEL) {
+        return;
+    }
+    sChannelTbl[uChannelIndex].byMAP |= byMap;
+}
+
+
+VOID
+CARDvClearChannelMapInfo(
+    IN PVOID        pDeviceHandler
+    )
+{
+//    PSDevice    pDevice = (PSDevice) pDeviceHandler;
+    UINT        ii = 0;
+
+    for (ii = 1; ii <=  CB_MAX_CHANNEL; ii++) {
+        sChannelTbl[ii].byMAP = 0;
+    }
+}
+
+
+BYTE
+CARDbyAutoChannelSelect(
+    IN PVOID        pDeviceHandler,
+    CARD_PHY_TYPE   ePHYType
+    )
+{
+//    PSDevice        pDevice = (PSDevice) pDeviceHandler;
+    UINT            ii = 0;
+    BYTE            byOptionChannel = 0;
+    INT             aiWeight[CB_MAX_CHANNEL_24G+1] = {-1000,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
+
+    if (ePHYType == PHY_TYPE_11A) {
+        for(ii=CB_MAX_CHANNEL_24G+1;ii<=CB_MAX_CHANNEL;ii++) {
+            if (sChannelTbl[ii].bValid == TRUE) {
+                if (byOptionChannel == 0) {
+                    byOptionChannel = (BYTE) ii;
+                }
+                if (sChannelTbl[ii].byMAP == 0) {
+                    return ((BYTE) ii);
+                } else if (BITbIsBitOff(sChannelTbl[ii].byMAP, 0x08)) {
+                    byOptionChannel = (BYTE) ii;
+                }
+            }
+        }
+    } else {
+        byOptionChannel = 0;
+        for(ii=1;ii<=CB_MAX_CHANNEL_24G;ii++) {
+            if (sChannelTbl[ii].bValid == TRUE) {
+                if (sChannelTbl[ii].byMAP == 0) {
+                    aiWeight[ii] += 100;
+                } else if (BITbIsBitOn(sChannelTbl[ii].byMAP, 0x01)) {
+                    if (ii > 3) {
+                        aiWeight[ii-3] -= 10;
+                    }
+                    if (ii > 2) {
+                        aiWeight[ii-2] -= 20;
+                    }
+                    if (ii > 1) {
+                        aiWeight[ii-1] -= 40;
+                    }
+                    aiWeight[ii] -= 80;
+                    if (ii < CB_MAX_CHANNEL_24G) {
+                        aiWeight[ii+1] -= 40;
+                    }
+                    if (ii < (CB_MAX_CHANNEL_24G - 1)) {
+                        aiWeight[ii+2] -= 20;
+                    }
+                    if (ii < (CB_MAX_CHANNEL_24G - 2)) {
+                        aiWeight[ii+3] -= 10;
+                    }
+                }
+            }
+        }
+        for(ii=1;ii<=CB_MAX_CHANNEL_24G;ii++) {
+            if ((sChannelTbl[ii].bValid == TRUE) &&
+                (aiWeight[ii] > aiWeight[byOptionChannel])) {
+                byOptionChannel = (BYTE) ii;
+            }
+        }
+    }
+    return (byOptionChannel);
+}
+
+
+
+//xxx
+VOID
+CARDvSafeResetTx (
+    IN PVOID    pDeviceHandler
+    )
+{
+    PSDevice    pDevice = (PSDevice) pDeviceHandler;
+    UINT        uu;
+    PSTxDesc    pCurrTD;
+
+    // initialize TD index
+    pDevice->apTailTD[0] = pDevice->apCurrTD[0] = &(pDevice->apTD0Rings[0]);
+    pDevice->apTailTD[1] = pDevice->apCurrTD[1] = &(pDevice->apTD1Rings[0]);
+
+    for (uu = 0; uu < TYPE_MAXTD; uu ++)
+        pDevice->iTDUsed[uu] = 0;
+
+    for (uu = 0; uu < pDevice->sOpts.nTxDescs[0]; uu++) {
+        pCurrTD = &(pDevice->apTD0Rings[uu]);
+        pCurrTD->m_td0TD0.f1Owner = OWNED_BY_HOST;
+        // init all Tx Packet pointer to NULL
+    }
+    for (uu = 0; uu < pDevice->sOpts.nTxDescs[1]; uu++) {
+        pCurrTD = &(pDevice->apTD1Rings[uu]);
+        pCurrTD->m_td0TD0.f1Owner = OWNED_BY_HOST;
+        // init all Tx Packet pointer to NULL
+    }
+
+    // set MAC TD pointer
+    MACvSetCurrTXDescAddr(TYPE_TXDMA0, pDevice->PortOffset,
+                        (pDevice->td0_pool_dma));
+
+    MACvSetCurrTXDescAddr(TYPE_AC0DMA, pDevice->PortOffset,
+                        (pDevice->td1_pool_dma));
+
+    // set MAC Beacon TX pointer
+    MACvSetCurrBCNTxDescAddr(pDevice->PortOffset,
+                        (pDevice->tx_beacon_dma));
+
+}
+
+
+
+/*+
+ *
+ * Description:
+ *      Reset Rx
+ *
+ * Parameters:
+ *  In:
+ *      pDevice     - Pointer to the adapter
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+-*/
+VOID
+CARDvSafeResetRx (
+    IN PVOID    pDeviceHandler
+    )
+{
+    PSDevice    pDevice = (PSDevice) pDeviceHandler;
+    UINT        uu;
+    PSRxDesc    pDesc;
+
+
+
+    // initialize RD index
+    pDevice->pCurrRD[0]=&(pDevice->aRD0Ring[0]);
+    pDevice->pCurrRD[1]=&(pDevice->aRD1Ring[0]);
+
+    // init state, all RD is chip's
+    for (uu = 0; uu < pDevice->sOpts.nRxDescs0; uu++) {
+        pDesc =&(pDevice->aRD0Ring[uu]);
+        pDesc->m_rd0RD0.wResCount = (WORD)(pDevice->rx_buf_sz);
+        pDesc->m_rd0RD0.f1Owner=OWNED_BY_NIC;
+        pDesc->m_rd1RD1.wReqCount = (WORD)(pDevice->rx_buf_sz);
+    }
+
+    // init state, all RD is chip's
+    for (uu = 0; uu < pDevice->sOpts.nRxDescs1; uu++) {
+        pDesc =&(pDevice->aRD1Ring[uu]);
+        pDesc->m_rd0RD0.wResCount = (WORD)(pDevice->rx_buf_sz);
+        pDesc->m_rd0RD0.f1Owner=OWNED_BY_NIC;
+        pDesc->m_rd1RD1.wReqCount = (WORD)(pDevice->rx_buf_sz);
+    }
+
+    pDevice->cbDFCB = CB_MAX_RX_FRAG;
+    pDevice->cbFreeDFCB = pDevice->cbDFCB;
+
+    // set perPkt mode
+    MACvRx0PerPktMode(pDevice->PortOffset);
+    MACvRx1PerPktMode(pDevice->PortOffset);
+    // set MAC RD pointer
+    MACvSetCurrRx0DescAddr(pDevice->PortOffset,
+                            pDevice->rd0_pool_dma);
+
+    MACvSetCurrRx1DescAddr(pDevice->PortOffset,
+                            pDevice->rd1_pool_dma);
+}
+
+
+
+
+/*
+ * Description: Get response Control frame rate in CCK mode
+ *
+ * Parameters:
+ *  In:
+ *      pDevice             - The adapter to be set
+ *      wRateIdx            - Receiving data rate
+ *  Out:
+ *      none
+ *
+ * Return Value: response Control frame rate
+ *
+ */
+WORD CARDwGetCCKControlRate(PVOID pDeviceHandler, WORD wRateIdx)
+{
+    PSDevice    pDevice = (PSDevice) pDeviceHandler;
+    UINT ui = (UINT)wRateIdx;
+
+    while (ui > RATE_1M) {
+        if (pDevice->wBasicRate & ((WORD)1 << ui)) {
+            return (WORD)ui;
+        }
+        ui --;
+    }
+    return (WORD)RATE_1M;
+}
+
+/*
+ * Description: Get response Control frame rate in OFDM mode
+ *
+ * Parameters:
+ *  In:
+ *      pDevice             - The adapter to be set
+ *      wRateIdx            - Receiving data rate
+ *  Out:
+ *      none
+ *
+ * Return Value: response Control frame rate
+ *
+ */
+WORD CARDwGetOFDMControlRate (PVOID pDeviceHandler, WORD wRateIdx)
+{
+    PSDevice pDevice = (PSDevice) pDeviceHandler;
+    UINT ui = (UINT)wRateIdx;
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"BASIC RATE: %X\n", pDevice->wBasicRate);
+
+    if (!CARDbIsOFDMinBasicRate((PVOID)pDevice)) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"CARDwGetOFDMControlRate:(NO OFDM) %d\n", wRateIdx);
+        if (wRateIdx > RATE_24M)
+            wRateIdx = RATE_24M;
+        return wRateIdx;
+    }
+    while (ui > RATE_11M) {
+        if (pDevice->wBasicRate & ((WORD)1 << ui)) {
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"CARDwGetOFDMControlRate : %d\n", ui);
+            return (WORD)ui;
+        }
+        ui --;
+    }
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"CARDwGetOFDMControlRate: 6M\n");
+    return (WORD)RATE_24M;
+}
+
+
+/*
+ * Description: Set RSPINF
+ *
+ * Parameters:
+ *  In:
+ *      pDevice             - The adapter to be set
+ *  Out:
+ *      none
+ *
+ * Return Value: None.
+ *
+ */
+void CARDvSetRSPINF (PVOID pDeviceHandler, CARD_PHY_TYPE ePHYType)
+{
+    PSDevice pDevice = (PSDevice) pDeviceHandler;
+    BYTE  byServ = 0x00, bySignal = 0x00; //For CCK
+    WORD  wLen = 0x0000;
+    BYTE  byTxRate, byRsvTime;             //For OFDM
+
+    //Set to Page1
+    MACvSelectPage1(pDevice->PortOffset);
+
+    //RSPINF_b_1
+    BBvCaculateParameter(pDevice,
+                         14,
+                         CARDwGetCCKControlRate((PVOID)pDevice, RATE_1M),
+                         PK_TYPE_11B,
+                         &wLen,
+                         &byServ,
+                         &bySignal
+    );
+
+    VNSvOutPortD(pDevice->PortOffset + MAC_REG_RSPINF_B_1, MAKEDWORD(wLen,MAKEWORD(bySignal,byServ)));
+    ///RSPINF_b_2
+    BBvCaculateParameter(pDevice,
+                         14,
+                         CARDwGetCCKControlRate((PVOID)pDevice, RATE_2M),
+                         PK_TYPE_11B,
+                         &wLen,
+                         &byServ,
+                         &bySignal
+    );
+
+    VNSvOutPortD(pDevice->PortOffset + MAC_REG_RSPINF_B_2, MAKEDWORD(wLen,MAKEWORD(bySignal,byServ)));
+    //RSPINF_b_5
+    BBvCaculateParameter(pDevice,
+                         14,
+                         CARDwGetCCKControlRate((PVOID)pDevice, RATE_5M),
+                         PK_TYPE_11B,
+                         &wLen,
+                         &byServ,
+                         &bySignal
+    );
+
+    VNSvOutPortD(pDevice->PortOffset + MAC_REG_RSPINF_B_5, MAKEDWORD(wLen,MAKEWORD(bySignal,byServ)));
+    //RSPINF_b_11
+    BBvCaculateParameter(pDevice,
+                         14,
+                         CARDwGetCCKControlRate((PVOID)pDevice, RATE_11M),
+                         PK_TYPE_11B,
+                         &wLen,
+                         &byServ,
+                         &bySignal
+    );
+
+    VNSvOutPortD(pDevice->PortOffset + MAC_REG_RSPINF_B_11, MAKEDWORD(wLen,MAKEWORD(bySignal,byServ)));
+    //RSPINF_a_6
+    s_vCaculateOFDMRParameter(RATE_6M,
+                              ePHYType,
+                              &byTxRate,
+                              &byRsvTime);
+    VNSvOutPortW(pDevice->PortOffset + MAC_REG_RSPINF_A_6, MAKEWORD(byTxRate,byRsvTime));
+    //RSPINF_a_9
+    s_vCaculateOFDMRParameter(RATE_9M,
+                              ePHYType,
+                              &byTxRate,
+                              &byRsvTime);
+    VNSvOutPortW(pDevice->PortOffset + MAC_REG_RSPINF_A_9, MAKEWORD(byTxRate,byRsvTime));
+    //RSPINF_a_12
+    s_vCaculateOFDMRParameter(RATE_12M,
+                              ePHYType,
+                              &byTxRate,
+                              &byRsvTime);
+    VNSvOutPortW(pDevice->PortOffset + MAC_REG_RSPINF_A_12, MAKEWORD(byTxRate,byRsvTime));
+    //RSPINF_a_18
+    s_vCaculateOFDMRParameter(RATE_18M,
+                              ePHYType,
+                              &byTxRate,
+                              &byRsvTime);
+   VNSvOutPortW(pDevice->PortOffset + MAC_REG_RSPINF_A_18, MAKEWORD(byTxRate,byRsvTime));
+    //RSPINF_a_24
+    s_vCaculateOFDMRParameter(RATE_24M,
+                              ePHYType,
+                              &byTxRate,
+                              &byRsvTime);
+    VNSvOutPortW(pDevice->PortOffset + MAC_REG_RSPINF_A_24, MAKEWORD(byTxRate,byRsvTime));
+    //RSPINF_a_36
+    s_vCaculateOFDMRParameter(CARDwGetOFDMControlRate((PVOID)pDevice, RATE_36M),
+                              ePHYType,
+                              &byTxRate,
+                              &byRsvTime);
+    VNSvOutPortW(pDevice->PortOffset + MAC_REG_RSPINF_A_36, MAKEWORD(byTxRate,byRsvTime));
+    //RSPINF_a_48
+    s_vCaculateOFDMRParameter(CARDwGetOFDMControlRate((PVOID)pDevice, RATE_48M),
+                              ePHYType,
+                              &byTxRate,
+                              &byRsvTime);
+    VNSvOutPortW(pDevice->PortOffset + MAC_REG_RSPINF_A_48, MAKEWORD(byTxRate,byRsvTime));
+    //RSPINF_a_54
+    s_vCaculateOFDMRParameter(CARDwGetOFDMControlRate((PVOID)pDevice, RATE_54M),
+                              ePHYType,
+                              &byTxRate,
+                              &byRsvTime);
+    VNSvOutPortW(pDevice->PortOffset + MAC_REG_RSPINF_A_54, MAKEWORD(byTxRate,byRsvTime));
+
+    //RSPINF_a_72
+    s_vCaculateOFDMRParameter(CARDwGetOFDMControlRate((PVOID)pDevice, RATE_54M),
+                              ePHYType,
+                              &byTxRate,
+                              &byRsvTime);
+    VNSvOutPortW(pDevice->PortOffset + MAC_REG_RSPINF_A_72, MAKEWORD(byTxRate,byRsvTime));
+    //Set to Page0
+    MACvSelectPage0(pDevice->PortOffset);
+}
+
+/*
+ * Description: Update IFS
+ *
+ * Parameters:
+ *  In:
+ *      pDevice             - The adapter to be set
+ *  Out:
+ *      none
+ *
+ * Return Value: None.
+ *
+ */
+void vUpdateIFS (PVOID pDeviceHandler)
+{
+    //Set SIFS, DIFS, EIFS, SlotTime, CwMin
+    PSDevice pDevice = (PSDevice) pDeviceHandler;
+
+    BYTE byMaxMin = 0;
+    if (pDevice->byPacketType==PK_TYPE_11A) {//0000 0000 0000 0000,11a
+        pDevice->uSlot = C_SLOT_SHORT;
+        pDevice->uSIFS = C_SIFS_A;
+        pDevice->uDIFS = C_SIFS_A + 2*C_SLOT_SHORT;
+        pDevice->uCwMin = C_CWMIN_A;
+        byMaxMin = 4;
+    }
+    else if (pDevice->byPacketType==PK_TYPE_11B) {//0000 0001 0000 0000,11b
+        pDevice->uSlot = C_SLOT_LONG;
+        pDevice->uSIFS = C_SIFS_BG;
+        pDevice->uDIFS = C_SIFS_BG + 2*C_SLOT_LONG;
+	    pDevice->uCwMin = C_CWMIN_B;
+        byMaxMin = 5;
+    }
+    else { // PK_TYPE_11GA & PK_TYPE_11GB
+        pDevice->uSIFS = C_SIFS_BG;
+        if (pDevice->bShortSlotTime) {
+            pDevice->uSlot = C_SLOT_SHORT;
+        } else {
+	        pDevice->uSlot = C_SLOT_LONG;
+	    }
+	    pDevice->uDIFS = C_SIFS_BG + 2*pDevice->uSlot;
+        if (pDevice->wBasicRate & 0x0150) { //0000 0001 0101 0000,24M,12M,6M
+            pDevice->uCwMin = C_CWMIN_A;
+            byMaxMin = 4;
+        }
+        else {
+            pDevice->uCwMin = C_CWMIN_B;
+            byMaxMin = 5;
+        }
+    }
+
+    pDevice->uCwMax = C_CWMAX;
+    pDevice->uEIFS = C_EIFS;
+    if (pDevice->byRFType == RF_RFMD2959) {
+        // bcs TX_PE will reserve 3 us
+        VNSvOutPortB(pDevice->PortOffset + MAC_REG_SIFS, (BYTE)(pDevice->uSIFS - 3));
+        VNSvOutPortB(pDevice->PortOffset + MAC_REG_DIFS, (BYTE)(pDevice->uDIFS - 3));
+    } else {
+        VNSvOutPortB(pDevice->PortOffset + MAC_REG_SIFS, (BYTE)pDevice->uSIFS);
+        VNSvOutPortB(pDevice->PortOffset + MAC_REG_DIFS, (BYTE)pDevice->uDIFS);
+    }
+    VNSvOutPortB(pDevice->PortOffset + MAC_REG_EIFS, (BYTE)pDevice->uEIFS);
+    VNSvOutPortB(pDevice->PortOffset + MAC_REG_SLOT, (BYTE)pDevice->uSlot);
+    byMaxMin |= 0xA0;//1010 1111,C_CWMAX = 1023
+    VNSvOutPortB(pDevice->PortOffset + MAC_REG_CWMAXMIN0, (BYTE)byMaxMin);
+}
+
+void CARDvUpdateBasicTopRate (PVOID pDeviceHandler)
+{
+    PSDevice pDevice = (PSDevice) pDeviceHandler;
+    BYTE byTopOFDM = RATE_24M, byTopCCK = RATE_1M;
+    BYTE ii;
+
+     //Determines the highest basic rate.
+     for (ii = RATE_54M; ii >= RATE_6M; ii --) {
+         if ( (pDevice->wBasicRate) & ((WORD)(1<<ii)) )
+             byTopOFDM = ii;
+             break;
+     }
+     pDevice->byTopOFDMBasicRate = byTopOFDM;
+
+     for (ii = RATE_11M;; ii --) {
+         if ( (pDevice->wBasicRate) & ((WORD)(1<<ii)) )
+             byTopCCK = ii;
+             break;
+         if (ii == RATE_1M)
+            break;
+     }
+     pDevice->byTopCCKBasicRate = byTopCCK;
+}
+
+
+/*
+ * Description: Set NIC Tx Basic Rate
+ *
+ * Parameters:
+ *  In:
+ *      pDevice         - The adapter to be set
+ *      wBasicRate      - Basic Rate to be set
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if succeeded; FALSE if failed.
+ *
+ */
+BOOL CARDbAddBasicRate (PVOID pDeviceHandler, WORD wRateIdx)
+{
+    PSDevice pDevice = (PSDevice) pDeviceHandler;
+    WORD wRate = (WORD)(1<<wRateIdx);
+
+    pDevice->wBasicRate |= wRate;
+
+    //Determines the highest basic rate.
+    CARDvUpdateBasicTopRate((PVOID)pDevice);
+
+    return(TRUE);
+}
+
+BOOL CARDbIsOFDMinBasicRate (PVOID pDeviceHandler)
+{
+    PSDevice pDevice = (PSDevice) pDeviceHandler;
+    int ii;
+
+    for (ii = RATE_54M; ii >= RATE_6M; ii --) {
+        if ((pDevice->wBasicRate) & ((WORD)(1<<ii)))
+            return TRUE;
+    }
+    return FALSE;
+}
+
+BYTE CARDbyGetPktType (PVOID pDeviceHandler)
+{
+    PSDevice pDevice = (PSDevice) pDeviceHandler;
+
+    if (pDevice->byBBType == BB_TYPE_11A || pDevice->byBBType == BB_TYPE_11B) {
+        return (BYTE)pDevice->byBBType;
+    }
+    else if (CARDbIsOFDMinBasicRate((PVOID)pDevice)) {
+        return PK_TYPE_11GA;
+    }
+    else {
+    	return PK_TYPE_11GB;
+    }
+}
+
+/*
+ * Description: Set NIC Loopback mode
+ *
+ * Parameters:
+ *  In:
+ *      pDevice         - The adapter to be set
+ *      wLoopbackMode   - Loopback mode to be set
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void CARDvSetLoopbackMode (DWORD_PTR dwIoBase, WORD wLoopbackMode)
+{
+    switch(wLoopbackMode) {
+    case CARD_LB_NONE:
+    case CARD_LB_MAC:
+    case CARD_LB_PHY:
+        break;
+    default:
+        ASSERT(FALSE);
+        break;
+    }
+    // set MAC loopback
+    MACvSetLoopbackMode(dwIoBase, LOBYTE(wLoopbackMode));
+    // set Baseband loopback
+}
+
+
+/*
+ * Description: Software Reset NIC
+ *
+ * Parameters:
+ *  In:
+ *      pDevice         - The adapter to be reset
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+BOOL CARDbSoftwareReset (PVOID pDeviceHandler)
+{
+    PSDevice pDevice = (PSDevice) pDeviceHandler;
+
+    // reset MAC
+    if (!MACbSafeSoftwareReset(pDevice->PortOffset))
+        return FALSE;
+
+    return TRUE;
+}
+
+
+/*
+ * Description: Caculate TSF offset of two TSF input
+ *              Get TSF Offset from RxBCN's TSF and local TSF
+ *
+ * Parameters:
+ *  In:
+ *      pDevice         - The adapter to be sync.
+ *      qwTSF1          - Rx BCN's TSF
+ *      qwTSF2          - Local TSF
+ *  Out:
+ *      none
+ *
+ * Return Value: TSF Offset value
+ *
+ */
+QWORD CARDqGetTSFOffset (BYTE byRxRate, QWORD qwTSF1, QWORD qwTSF2)
+{
+    QWORD   qwTSFOffset;
+    WORD    wRxBcnTSFOffst= 0;;
+
+    HIDWORD(qwTSFOffset) = 0;
+    LODWORD(qwTSFOffset) = 0;
+    wRxBcnTSFOffst = cwRXBCNTSFOff[byRxRate%MAX_RATE];
+    (qwTSF2).u.dwLowDword += (DWORD)(wRxBcnTSFOffst);
+    if ((qwTSF2).u.dwLowDword < (DWORD)(wRxBcnTSFOffst)) {
+        (qwTSF2).u.dwHighDword++;
+    }
+    LODWORD(qwTSFOffset) = LODWORD(qwTSF1) - LODWORD(qwTSF2);
+    if (LODWORD(qwTSF1) < LODWORD(qwTSF2)) {
+        // if borrow needed
+        HIDWORD(qwTSFOffset) = HIDWORD(qwTSF1) - HIDWORD(qwTSF2) - 1 ;
+    }
+    else {
+        HIDWORD(qwTSFOffset) = HIDWORD(qwTSF1) - HIDWORD(qwTSF2);
+    };
+    return (qwTSFOffset);
+}
+
+
+/*
+ * Description: Read NIC TSF counter
+ *              Get local TSF counter
+ *
+ * Parameters:
+ *  In:
+ *      pDevice         - The adapter to be read
+ *  Out:
+ *      qwCurrTSF       - Current TSF counter
+ *
+ * Return Value: TRUE if success; otherwise FALSE
+ *
+ */
+BOOL CARDbGetCurrentTSF (DWORD_PTR dwIoBase, PQWORD pqwCurrTSF)
+{
+    WORD    ww;
+    BYTE    byData;
+
+    MACvRegBitsOn(dwIoBase, MAC_REG_TFTCTL, TFTCTL_TSFCNTRRD);
+    for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+        VNSvInPortB(dwIoBase + MAC_REG_TFTCTL, &byData);
+        if (BITbIsBitOff(byData, TFTCTL_TSFCNTRRD))
+            break;
+    }
+    if (ww == W_MAX_TIMEOUT)
+        return(FALSE);
+    VNSvInPortD(dwIoBase + MAC_REG_TSFCNTR, &LODWORD(*pqwCurrTSF));
+    VNSvInPortD(dwIoBase + MAC_REG_TSFCNTR + 4, &HIDWORD(*pqwCurrTSF));
+
+    return(TRUE);
+}
+
+
+/*
+ * Description: Read NIC TSF counter
+ *              Get NEXTTBTT from adjusted TSF and Beacon Interval
+ *
+ * Parameters:
+ *  In:
+ *      qwTSF           - Current TSF counter
+ *      wbeaconInterval - Beacon Interval
+ *  Out:
+ *      qwCurrTSF       - Current TSF counter
+ *
+ * Return Value: TSF value of next Beacon
+ *
+ */
+QWORD CARDqGetNextTBTT (QWORD qwTSF, WORD wBeaconInterval)
+{
+
+    UINT    uLowNextTBTT;
+    UINT    uHighRemain, uLowRemain;
+    UINT    uBeaconInterval;
+
+    uBeaconInterval = wBeaconInterval * 1024;
+    // Next TBTT = ((local_current_TSF / beacon_interval) + 1 ) * beacon_interval
+    uLowNextTBTT = (LODWORD(qwTSF) >> 10) << 10;
+    // low dword (mod) bcn
+    uLowRemain = (uLowNextTBTT) % uBeaconInterval;
+//    uHighRemain = ((0x80000000 % uBeaconInterval)* 2 * HIDWORD(qwTSF))
+//                  % uBeaconInterval;
+    // high dword (mod) bcn
+    uHighRemain = (((0xffffffff % uBeaconInterval) + 1) * HIDWORD(qwTSF))
+                  % uBeaconInterval;
+    uLowRemain = (uHighRemain + uLowRemain) % uBeaconInterval;
+    uLowRemain = uBeaconInterval - uLowRemain;
+
+    // check if carry when add one beacon interval
+    if ((~uLowNextTBTT) < uLowRemain)
+        HIDWORD(qwTSF) ++ ;
+
+    LODWORD(qwTSF) = uLowNextTBTT + uLowRemain;
+
+    return (qwTSF);
+}
+
+
+/*
+ * Description: Set NIC TSF counter for first Beacon time
+ *              Get NEXTTBTT from adjusted TSF and Beacon Interval
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase        - IO Base
+ *      wBeaconInterval - Beacon Interval
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void CARDvSetFirstNextTBTT (DWORD_PTR dwIoBase, WORD wBeaconInterval)
+{
+
+    QWORD   qwNextTBTT;
+
+    HIDWORD(qwNextTBTT) = 0;
+    LODWORD(qwNextTBTT) = 0;
+    CARDbGetCurrentTSF(dwIoBase, &qwNextTBTT); //Get Local TSF counter
+    qwNextTBTT = CARDqGetNextTBTT(qwNextTBTT, wBeaconInterval);
+    // Set NextTBTT
+    VNSvOutPortD(dwIoBase + MAC_REG_NEXTTBTT, LODWORD(qwNextTBTT));
+    VNSvOutPortD(dwIoBase + MAC_REG_NEXTTBTT + 4, HIDWORD(qwNextTBTT));
+    MACvRegBitsOn(dwIoBase, MAC_REG_TFTCTL, TFTCTL_TBTTSYNCEN);
+    //DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Card:First Next TBTT[%8xh:%8xh] \n", HIDWORD(qwNextTBTT), LODWORD(qwNextTBTT));
+    return;
+}
+
+
+/*
+ * Description: Sync NIC TSF counter for Beacon time
+ *              Get NEXTTBTT and write to HW
+ *
+ * Parameters:
+ *  In:
+ *      pDevice         - The adapter to be set
+ *      qwTSF           - Current TSF counter
+ *      wBeaconInterval - Beacon Interval
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void CARDvUpdateNextTBTT (DWORD_PTR dwIoBase, QWORD qwTSF, WORD wBeaconInterval)
+{
+
+    qwTSF = CARDqGetNextTBTT(qwTSF, wBeaconInterval);
+    // Set NextTBTT
+    VNSvOutPortD(dwIoBase + MAC_REG_NEXTTBTT, LODWORD(qwTSF));
+    VNSvOutPortD(dwIoBase + MAC_REG_NEXTTBTT + 4, HIDWORD(qwTSF));
+    MACvRegBitsOn(dwIoBase, MAC_REG_TFTCTL, TFTCTL_TBTTSYNCEN);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Card:Update Next TBTT[%8xh:%8xh] \n",(UINT)HIDWORD(qwTSF), (UINT)LODWORD(qwTSF));
+
+    return;
+}
+
+
+
+
+
+
+
diff --git a/drivers/staging/vt6655/card.h b/drivers/staging/vt6655/card.h
new file mode 100644
index 00000000000..bb292e14b0b
--- /dev/null
+++ b/drivers/staging/vt6655/card.h
@@ -0,0 +1,273 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: card.h
+ *
+ * Purpose: Provide functions to setup NIC operation mode
+ *
+ * Author: Tevin Chen
+ *
+ * Date: May 21, 1996
+ *
+ */
+
+
+#ifndef __CARD_H__
+#define __CARD_H__
+
+//#if !defined(__DEVICE_H__)
+//#include "device.h"
+//#endif
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+
+
+
+
+/*---------------------  Export Definitions -------------------------*/
+//
+// Loopback mode
+//
+// LOBYTE is MAC LB mode, HIBYTE is MII LB mode
+#define CARD_LB_NONE            MAKEWORD(MAC_LB_NONE, 0)
+#define CARD_LB_MAC             MAKEWORD(MAC_LB_INTERNAL, 0)   // PHY must ISO, avoid MAC loopback packet go out
+#define CARD_LB_PHY             MAKEWORD(MAC_LB_EXT, 0)
+
+
+#define DEFAULT_MSDU_LIFETIME           512  // ms
+#define DEFAULT_MSDU_LIFETIME_RES_64us  8000 // 64us
+
+#define DEFAULT_MGN_LIFETIME            8    // ms
+#define DEFAULT_MGN_LIFETIME_RES_64us   125  // 64us
+
+#define CB_MAX_CHANNEL_24G      14
+#define CB_MAX_CHANNEL_5G       42 //[20050104] add channel9(5045MHz), 41==>42
+#define CB_MAX_CHANNEL          (CB_MAX_CHANNEL_24G+CB_MAX_CHANNEL_5G)
+
+typedef enum _CARD_PHY_TYPE {
+    PHY_TYPE_AUTO,
+    PHY_TYPE_11B,
+    PHY_TYPE_11G,
+    PHY_TYPE_11A
+} CARD_PHY_TYPE, *PCARD_PHY_TYPE;
+
+typedef enum _CARD_PKT_TYPE {
+    PKT_TYPE_802_11_BCN,
+    PKT_TYPE_802_11_MNG,
+    PKT_TYPE_802_11_DATA,
+    PKT_TYPE_802_11_ALL
+} CARD_PKT_TYPE, *PCARD_PKT_TYPE;
+
+typedef enum _CARD_STATUS_TYPE {
+    CARD_STATUS_MEDIA_CONNECT,
+    CARD_STATUS_MEDIA_DISCONNECT,
+    CARD_STATUS_PMKID
+} CARD_STATUS_TYPE, *PCARD_STATUS_TYPE;
+
+typedef enum _CARD_OP_MODE {
+    OP_MODE_INFRASTRUCTURE,
+    OP_MODE_ADHOC,
+    OP_MODE_AP,
+    OP_MODE_UNKNOWN
+} CARD_OP_MODE, *PCARD_OP_MODE;
+
+
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+#ifdef __cplusplus
+extern "C" {                            /* Assume C declarations for C++ */
+#endif /* __cplusplus */
+
+BOOL ChannelValid(UINT CountryCode, UINT ChannelIndex);
+void CARDvSetRSPINF(PVOID pDeviceHandler, CARD_PHY_TYPE ePHYType);
+void vUpdateIFS(PVOID pDeviceHandler);
+void CARDvUpdateBasicTopRate(PVOID pDeviceHandler);
+BOOL CARDbAddBasicRate(PVOID pDeviceHandler, WORD wRateIdx);
+BOOL CARDbIsOFDMinBasicRate(PVOID pDeviceHandler);
+void CARDvSetLoopbackMode(DWORD_PTR dwIoBase, WORD wLoopbackMode);
+BOOL CARDbSoftwareReset(PVOID pDeviceHandler);
+void CARDvSetFirstNextTBTT(DWORD_PTR dwIoBase, WORD wBeaconInterval);
+void CARDvUpdateNextTBTT(DWORD_PTR dwIoBase, QWORD qwTSF, WORD wBeaconInterval);
+BOOL CARDbGetCurrentTSF(DWORD_PTR dwIoBase, PQWORD pqwCurrTSF);
+QWORD CARDqGetNextTBTT(QWORD qwTSF, WORD wBeaconInterval);
+QWORD CARDqGetTSFOffset(BYTE byRxRate, QWORD qwTSF1, QWORD qwTSF2);
+BOOL CARDbSetTxPower(PVOID pDeviceHandler, ULONG ulTxPower);
+BYTE CARDbyGetPktType(PVOID pDeviceHandler);
+VOID CARDvSafeResetTx(PVOID pDeviceHandler);
+VOID CARDvSafeResetRx(PVOID pDeviceHandler);
+
+//xxx
+BOOL CARDbRadioPowerOff(PVOID pDeviceHandler);
+BOOL CARDbRadioPowerOn(PVOID pDeviceHandler);
+BOOL CARDbSetChannel(PVOID pDeviceHandler, UINT uConnectionChannel);
+//BOOL CARDbSendPacket(PVOID pDeviceHandler, PVOID pPacket, CARD_PKT_TYPE ePktType, UINT uLength);
+BOOL CARDbIsShortPreamble(PVOID pDeviceHandler);
+BOOL CARDbIsShorSlotTime(PVOID pDeviceHandler);
+BOOL CARDbSetPhyParameter(PVOID pDeviceHandler, CARD_PHY_TYPE ePHYType, WORD wCapInfo, BYTE byERPField, PVOID pvSupportRateIEs, PVOID pvExtSupportRateIEs);
+BOOL CARDbUpdateTSF(PVOID pDeviceHandler, BYTE byRxRate, QWORD qwBSSTimestamp, QWORD qwLocalTSF);
+BOOL CARDbStopTxPacket(PVOID pDeviceHandler, CARD_PKT_TYPE ePktType);
+BOOL CARDbStartTxPacket(PVOID pDeviceHandler, CARD_PKT_TYPE ePktType);
+BOOL CARDbSetBeaconPeriod(PVOID pDeviceHandler, WORD wBeaconInterval);
+BOOL CARDbSetBSSID(PVOID pDeviceHandler, PBYTE pbyBSSID, CARD_OP_MODE eOPMode);
+
+BOOL
+CARDbPowerDown(
+    PVOID   pDeviceHandler
+    );
+
+BOOL CARDbSetTxDataRate(
+    PVOID   pDeviceHandler,
+    WORD    wDataRate
+    );
+
+
+BOOL CARDbRemoveKey (PVOID pDeviceHandler, PBYTE pbyBSSID);
+
+BOOL
+CARDbAdd_PMKID_Candidate (
+    IN PVOID            pDeviceHandler,
+    IN PBYTE            pbyBSSID,
+    IN BOOL             bRSNCapExist,
+    IN WORD             wRSNCap
+    );
+
+PVOID
+CARDpGetCurrentAddress (
+    IN PVOID            pDeviceHandler
+    );
+
+
+VOID CARDvInitChannelTable(PVOID pDeviceHandler);
+BYTE CARDbyGetChannelMapping(PVOID pDeviceHandler, BYTE byChannelNumber, CARD_PHY_TYPE ePhyType);
+
+BOOL
+CARDbStartMeasure (
+    IN PVOID            pDeviceHandler,
+    IN PVOID            pvMeasureEIDs,
+    IN UINT             uNumOfMeasureEIDs
+    );
+
+BOOL
+CARDbChannelSwitch (
+    IN PVOID            pDeviceHandler,
+    IN BYTE             byMode,
+    IN BYTE             byNewChannel,
+    IN BYTE             byCount
+    );
+
+BOOL
+CARDbSetQuiet (
+    IN PVOID            pDeviceHandler,
+    IN BOOL             bResetQuiet,
+    IN BYTE             byQuietCount,
+    IN BYTE             byQuietPeriod,
+    IN WORD             wQuietDuration,
+    IN WORD             wQuietOffset
+    );
+
+BOOL
+CARDbStartQuiet (
+    IN PVOID            pDeviceHandler
+    );
+
+VOID
+CARDvSetCountryInfo (
+    IN PVOID            pDeviceHandler,
+    IN CARD_PHY_TYPE    ePHYType,
+    IN PVOID            pIE
+    );
+
+VOID
+CARDvSetPowerConstraint (
+    IN PVOID            pDeviceHandler,
+    IN BYTE             byChannel,
+    IN I8               byPower
+    );
+
+VOID
+CARDvGetPowerCapability (
+    IN PVOID            pDeviceHandler,
+    OUT PBYTE           pbyMinPower,
+    OUT PBYTE           pbyMaxPower
+    );
+
+BYTE
+CARDbySetSupportChannels (
+    IN PVOID            pDeviceHandler,
+    IN OUT PBYTE        pbyIEs
+    );
+
+I8
+CARDbyGetTransmitPower (
+    IN PVOID            pDeviceHandler
+    );
+
+BOOL
+CARDbChannelGetList (
+    IN  UINT       uCountryCodeIdx,
+    OUT PBYTE      pbyChannelTable
+    );
+
+VOID
+CARDvSetCountryIE(
+    IN PVOID        pDeviceHandler,
+    IN PVOID        pIE
+    );
+
+BOOL
+CARDbGetChannelMapInfo(
+    IN PVOID        pDeviceHandler,
+    IN UINT         uChannelIndex,
+    OUT PBYTE       pbyChannelNumber,
+    OUT PBYTE       pbyMap
+    );
+
+VOID
+CARDvSetChannelMapInfo(
+    IN PVOID        pDeviceHandler,
+    IN UINT         uChannelIndex,
+    IN BYTE         byMap
+    );
+
+VOID
+CARDvClearChannelMapInfo(
+    IN PVOID        pDeviceHandler
+    );
+
+BYTE
+CARDbyAutoChannelSelect(
+    IN PVOID        pDeviceHandler,
+    CARD_PHY_TYPE   ePHYType
+    );
+
+BYTE CARDbyGetChannelNumber(PVOID pDeviceHandler, BYTE byChannelIndex);
+
+#ifdef __cplusplus
+}                                       /* End of extern "C" { */
+#endif /* __cplusplus */
+
+
+#endif // __CARD_H__
+
+
+
diff --git a/drivers/staging/vt6655/country.h b/drivers/staging/vt6655/country.h
new file mode 100644
index 00000000000..65d1e52916c
--- /dev/null
+++ b/drivers/staging/vt6655/country.h
@@ -0,0 +1,192 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: country.h
+ *
+ * Purpose: Country Code information
+ *
+ * Author: Lucas Lin
+ *
+ * Date: Dec 23, 2004
+ *
+ */
+
+#ifndef __COUNTRY_H__
+#define __COUNTRY_H__
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+
+
+/*---------------------  Export Definitions -------------------------*/
+/************************************************************************
+ * The definition here should be complied with the INF country order
+ * Please check with VNWL.inf/VNWL64.inf/VNWL*.inf
+ ************************************************************************/
+typedef enum _COUNTRY_CODE {
+    CCODE_FCC = 0,
+    CCODE_TELEC,
+    CCODE_ETSI,
+    CCODE_RESV3,
+    CCODE_RESV4,
+    CCODE_RESV5,
+    CCODE_RESV6,
+    CCODE_RESV7,
+    CCODE_RESV8,
+    CCODE_RESV9,
+    CCODE_RESVa,
+    CCODE_RESVb,
+    CCODE_RESVc,
+    CCODE_RESVd,
+    CCODE_RESVe,
+    CCODE_ALLBAND,
+    CCODE_ALBANIA,
+    CCODE_ALGERIA,
+    CCODE_ARGENTINA,
+    CCODE_ARMENIA,
+    CCODE_AUSTRALIA,
+    CCODE_AUSTRIA,
+    CCODE_AZERBAIJAN,
+    CCODE_BAHRAIN,
+    CCODE_BELARUS,
+    CCODE_BELGIUM,
+    CCODE_BELIZE,
+    CCODE_BOLIVIA,
+    CCODE_BRAZIL,
+    CCODE_BRUNEI_DARUSSALAM,
+    CCODE_BULGARIA,
+    CCODE_CANADA,
+    CCODE_CHILE,
+    CCODE_CHINA,
+    CCODE_COLOMBIA,
+    CCODE_COSTA_RICA,
+    CCODE_CROATIA,
+    CCODE_CYPRUS,
+    CCODE_CZECH,
+    CCODE_DENMARK,
+    CCODE_DOMINICAN_REPUBLIC,
+    CCODE_ECUADOR,
+    CCODE_EGYPT,
+    CCODE_EL_SALVADOR,
+    CCODE_ESTONIA,
+    CCODE_FINLAND,
+    CCODE_FRANCE,
+    CCODE_GERMANY,
+    CCODE_GREECE,
+    CCODE_GEORGIA,
+    CCODE_GUATEMALA,
+    CCODE_HONDURAS,
+    CCODE_HONG_KONG,
+    CCODE_HUNGARY,
+    CCODE_ICELAND,
+    CCODE_INDIA,
+    CCODE_INDONESIA,
+    CCODE_IRAN,
+    CCODE_IRELAND,
+    CCODE_ITALY,
+    CCODE_ISRAEL,
+    CCODE_JAPAN,
+    CCODE_JORDAN,
+    CCODE_KAZAKHSTAN,
+    CCODE_KUWAIT,
+    CCODE_LATVIA,
+    CCODE_LEBANON,
+    CCODE_LEICHTENSTEIN,
+    CCODE_LITHUANIA,
+    CCODE_LUXEMBURG,
+    CCODE_MACAU,
+    CCODE_MACEDONIA,
+    CCODE_MALTA,
+    CCODE_MALAYSIA,
+    CCODE_MEXICO,
+    CCODE_MONACO,
+    CCODE_MOROCCO,
+    CCODE_NETHERLANDS,
+    CCODE_NEW_ZEALAND,
+    CCODE_NORTH_KOREA,
+    CCODE_NORWAY,
+    CCODE_OMAN,
+    CCODE_PAKISTAN,
+    CCODE_PANAMA,
+    CCODE_PERU,
+    CCODE_PHILIPPINES,
+    CCODE_POLAND,
+    CCODE_PORTUGAL,
+    CCODE_PUERTO_RICO,
+    CCODE_QATAR,
+    CCODE_ROMANIA,
+    CCODE_RUSSIA,
+    CCODE_SAUDI_ARABIA,
+    CCODE_SINGAPORE,
+    CCODE_SLOVAKIA,
+    CCODE_SLOVENIA,
+    CCODE_SOUTH_AFRICA,
+    CCODE_SOUTH_KOREA,
+    CCODE_SPAIN,
+    CCODE_SWEDEN,
+    CCODE_SWITZERLAND,
+    CCODE_SYRIA,
+    CCODE_TAIWAN,
+    CCODE_THAILAND,
+    CCODE_TRINIDAD_TOBAGO,
+    CCODE_TUNISIA,
+    CCODE_TURKEY,
+    CCODE_UK,
+    CCODE_UKRAINE,
+    CCODE_UNITED_ARAB_EMIRATES,
+    CCODE_UNITED_STATES,
+    CCODE_URUGUAY,
+    CCODE_UZBEKISTAN,
+    CCODE_VENEZUELA,
+    CCODE_VIETNAM,
+    CCODE_YEMEN,
+    CCODE_ZIMBABWE,
+    CCODE_JAPAN_W52_W53,
+    CCODE_MAX
+} COUNTRY_CODE;
+
+typedef struct tagSCountryTable
+{
+    BYTE    byChannelCountryCode;             /* The country code         */
+    CHAR    chCountryCode[2];
+    BYTE    bChannelIdxList[CB_MAX_CHANNEL];  /* Available channels Index */
+    BYTE    byPower[CB_MAX_CHANNEL];
+}   SCountryTable, DEF* PSCountryTable;
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+extern SCountryTable ChannelRuleTab[CCODE_MAX+1];
+
+/*---------------------  Export Functions  --------------------------*/
+#ifdef __cplusplus
+extern "C" {                            /* Assume C declarations for C++ */
+#endif /* __cplusplus */
+
+
+#ifdef __cplusplus
+}                                       /* End of extern "C" { */
+#endif /* __cplusplus */
+
+
+/************************************************************************
+ * Function prototype
+ ************************************************************************/
+#endif  /* __COUNTRY_H__ */
diff --git a/drivers/staging/vt6655/datarate.c b/drivers/staging/vt6655/datarate.c
new file mode 100644
index 00000000000..f58f9636be2
--- /dev/null
+++ b/drivers/staging/vt6655/datarate.c
@@ -0,0 +1,455 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: datarate.c
+ *
+ * Purpose: Handles the auto fallback & data rates functions
+ *
+ * Author: Lyndon Chen
+ *
+ * Date: July 17, 2002
+ *
+ * Functions:
+ *      RATEvParseMaxRate - Parsing the highest basic & support rate in rate field of frame
+ *      RATEvTxRateFallBack - Rate fallback Algorithm Implementaion
+ *      RATEuSetIE- Set rate IE field.
+ *
+ * Revision History:
+ *
+ */
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+#if !defined(__TMACRO_H__)
+#include "tmacro.h"
+#endif
+#if !defined(__MAC_H__)
+#include "mac.h"
+#endif
+#if !defined(__80211MGR_H__)
+#include "80211mgr.h"
+#endif
+#if !defined(__BSSDB_H__)
+#include "bssdb.h"
+#endif
+#if !defined(__DATARATE_H__)
+#include "datarate.h"
+#endif
+#if !defined(__CARD_H__)
+#include "card.h"
+#endif
+#if !defined(__BASEBAND_H__)
+#include "baseband.h"
+#endif
+#if !defined(__SROM_H__)
+#include "srom.h"
+#endif
+
+/*---------------------  Static Definitions -------------------------*/
+
+
+
+
+/*---------------------  Static Classes  ----------------------------*/
+
+
+ extern WORD TxRate_iwconfig; //2008-5-8 <add> by chester
+/*---------------------  Static Variables  --------------------------*/
+//static int          msglevel                =MSG_LEVEL_DEBUG;
+static int          msglevel                =MSG_LEVEL_INFO;
+const BYTE acbyIERate[MAX_RATE] =
+{0x02, 0x04, 0x0B, 0x16, 0x0C, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C};
+
+#define AUTORATE_TXOK_CNT       0x0400
+#define AUTORATE_TXFAIL_CNT     0x0064
+#define AUTORATE_TIMEOUT        10
+
+/*---------------------  Static Functions  --------------------------*/
+
+VOID s_vResetCounter (
+    IN PKnownNodeDB psNodeDBTable
+    );
+
+
+
+VOID
+s_vResetCounter (
+    IN PKnownNodeDB psNodeDBTable
+    )
+{
+    BYTE            ii;
+
+    // clear statistic counter for auto_rate
+    for(ii=0;ii<=MAX_RATE;ii++) {
+        psNodeDBTable->uTxOk[ii] = 0;
+        psNodeDBTable->uTxFail[ii] = 0;
+    }
+}
+
+/*---------------------  Export Variables  --------------------------*/
+
+
+/*---------------------  Export Functions  --------------------------*/
+
+
+/*+
+ *
+ * Description:
+ *      Get RateIdx from the value in SuppRates IE or ExtSuppRates IE
+ *
+ * Parameters:
+ *  In:
+ *      BYTE    - Rate value in SuppRates IE or ExtSuppRates IE
+ *  Out:
+ *      none
+ *
+ * Return Value: RateIdx
+ *
+-*/
+BYTE
+DATARATEbyGetRateIdx (
+    IN BYTE byRate
+    )
+{
+    BYTE    ii;
+
+    //Erase basicRate flag.
+    byRate = byRate & 0x7F;//0111 1111
+
+    for (ii = 0; ii < MAX_RATE; ii ++) {
+        if (acbyIERate[ii] == byRate)
+            return ii;
+    }
+    return 0;
+}
+
+
+
+/*+
+ *
+ * Routine Description:
+ *      Rate fallback Algorithm Implementaion
+ *
+ * Parameters:
+ *  In:
+ *      pDevice         - Pointer to the adapter
+ *      psNodeDBTable   - Pointer to Node Data Base
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+-*/
+#define AUTORATE_TXCNT_THRESHOLD        20
+#define AUTORATE_INC_THRESHOLD          30
+
+
+
+
+/*+
+ *
+ * Description:
+ *      Get RateIdx from the value in SuppRates IE or ExtSuppRates IE
+ *
+ * Parameters:
+ *  In:
+ *      BYTE    - Rate value in SuppRates IE or ExtSuppRates IE
+ *  Out:
+ *      none
+ *
+ * Return Value: RateIdx
+ *
+-*/
+WORD
+wGetRateIdx(
+    IN BYTE byRate
+    )
+{
+    WORD    ii;
+
+    //Erase basicRate flag.
+    byRate = byRate & 0x7F;//0111 1111
+
+    for (ii = 0; ii < MAX_RATE; ii ++) {
+        if (acbyIERate[ii] == byRate)
+            return ii;
+    }
+    return 0;
+}
+
+/*+
+ *
+ * Description:
+ *      Parsing the highest basic & support rate in rate field of frame.
+ *
+ * Parameters:
+ *  In:
+ *      pDevice         - Pointer to the adapter
+ *      pItemRates      - Pointer to Rate field defined in 802.11 spec.
+ *      pItemExtRates      - Pointer to Extended Rate field defined in 802.11 spec.
+ *  Out:
+ *      pwMaxBasicRate  - Maximum Basic Rate
+ *      pwMaxSuppRate   - Maximum Supported Rate
+ *      pbyTopCCKRate   - Maximum Basic Rate in CCK mode
+ *      pbyTopOFDMRate  - Maximum Basic Rate in OFDM mode
+ *
+ * Return Value: none
+ *
+-*/
+VOID
+RATEvParseMaxRate (
+    IN PVOID pDeviceHandler,
+    IN PWLAN_IE_SUPP_RATES pItemRates,
+    IN PWLAN_IE_SUPP_RATES pItemExtRates,
+    IN BOOL bUpdateBasicRate,
+    OUT PWORD pwMaxBasicRate,
+    OUT PWORD pwMaxSuppRate,
+    OUT PWORD pwSuppRate,
+    OUT PBYTE pbyTopCCKRate,
+    OUT PBYTE pbyTopOFDMRate
+    )
+{
+PSDevice  pDevice = (PSDevice) pDeviceHandler;
+UINT  ii;
+BYTE  byHighSuppRate = 0;
+BYTE  byRate = 0;
+WORD  wOldBasicRate = pDevice->wBasicRate;
+UINT  uRateLen;
+
+
+    if (pItemRates == NULL)
+        return;
+
+    *pwSuppRate = 0;
+    uRateLen = pItemRates->len;
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ParseMaxRate Len: %d\n", uRateLen);
+    if (pDevice->eCurrentPHYType != PHY_TYPE_11B) {
+        if (uRateLen > WLAN_RATES_MAXLEN)
+            uRateLen = WLAN_RATES_MAXLEN;
+    } else {
+        if (uRateLen > WLAN_RATES_MAXLEN_11B)
+            uRateLen = WLAN_RATES_MAXLEN_11B;
+    }
+
+    for (ii = 0; ii < uRateLen; ii++) {
+    	byRate = (BYTE)(pItemRates->abyRates[ii]);
+        if (WLAN_MGMT_IS_BASICRATE(byRate) &&
+            (bUpdateBasicRate == TRUE))  {
+            // Add to basic rate set, update pDevice->byTopCCKBasicRate and pDevice->byTopOFDMBasicRate
+            CARDbAddBasicRate((PVOID)pDevice, wGetRateIdx(byRate));
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ParseMaxRate AddBasicRate: %d\n", wGetRateIdx(byRate));
+        }
+        byRate = (BYTE)(pItemRates->abyRates[ii]&0x7F);
+        if (byHighSuppRate == 0)
+            byHighSuppRate = byRate;
+        if (byRate > byHighSuppRate)
+            byHighSuppRate = byRate;
+        *pwSuppRate |= (1<<wGetRateIdx(byRate));
+    }
+    if ((pItemExtRates != NULL) && (pItemExtRates->byElementID == WLAN_EID_EXTSUPP_RATES) &&
+        (pDevice->eCurrentPHYType != PHY_TYPE_11B)) {
+
+        UINT  uExtRateLen = pItemExtRates->len;
+
+        if (uExtRateLen > WLAN_RATES_MAXLEN)
+            uExtRateLen = WLAN_RATES_MAXLEN;
+
+        for (ii = 0; ii < uExtRateLen ; ii++) {
+            byRate = (BYTE)(pItemExtRates->abyRates[ii]);
+            // select highest basic rate
+            if (WLAN_MGMT_IS_BASICRATE(pItemExtRates->abyRates[ii])) {
+            	// Add to basic rate set, update pDevice->byTopCCKBasicRate and pDevice->byTopOFDMBasicRate
+                CARDbAddBasicRate((PVOID)pDevice, wGetRateIdx(byRate));
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ParseMaxRate AddBasicRate: %d\n", wGetRateIdx(byRate));
+            }
+            byRate = (BYTE)(pItemExtRates->abyRates[ii]&0x7F);
+            if (byHighSuppRate == 0)
+                byHighSuppRate = byRate;
+            if (byRate > byHighSuppRate)
+                byHighSuppRate = byRate;
+            *pwSuppRate |= (1<<wGetRateIdx(byRate));
+            //DBG_PRN_GRP09(("ParseMaxRate : HighSuppRate: %d, %X\n", wGetRateIdx(byRate), byRate));
+        }
+    } //if(pItemExtRates != NULL)
+
+    if ((pDevice->byPacketType == PK_TYPE_11GB) && CARDbIsOFDMinBasicRate((PVOID)pDevice)) {
+        pDevice->byPacketType = PK_TYPE_11GA;
+    }
+
+    *pbyTopCCKRate = pDevice->byTopCCKBasicRate;
+    *pbyTopOFDMRate = pDevice->byTopOFDMBasicRate;
+    *pwMaxSuppRate = wGetRateIdx(byHighSuppRate);
+    if ((pDevice->byPacketType==PK_TYPE_11B) || (pDevice->byPacketType==PK_TYPE_11GB))
+       *pwMaxBasicRate = pDevice->byTopCCKBasicRate;
+    else
+       *pwMaxBasicRate = pDevice->byTopOFDMBasicRate;
+    if (wOldBasicRate != pDevice->wBasicRate)
+        CARDvSetRSPINF((PVOID)pDevice, pDevice->eCurrentPHYType);
+
+     DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Exit ParseMaxRate\n");
+}
+
+
+/*+
+ *
+ * Routine Description:
+ *      Rate fallback Algorithm Implementaion
+ *
+ * Parameters:
+ *  In:
+ *      pDevice         - Pointer to the adapter
+ *      psNodeDBTable   - Pointer to Node Data Base
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+-*/
+#define AUTORATE_TXCNT_THRESHOLD        20
+#define AUTORATE_INC_THRESHOLD          30
+
+VOID
+RATEvTxRateFallBack (
+    IN PVOID pDeviceHandler,
+    IN PKnownNodeDB psNodeDBTable
+    )
+{
+PSDevice        pDevice = (PSDevice) pDeviceHandler;
+WORD            wIdxDownRate = 0;
+UINT            ii;
+//DWORD           dwRateTable[MAX_RATE]  = {1,   2,   5,   11,  6,    9,    12,   18,  24,  36,  48,  54};
+BOOL            bAutoRate[MAX_RATE]    = {TRUE,TRUE,TRUE,TRUE,FALSE,FALSE,TRUE,TRUE,TRUE,TRUE,TRUE,TRUE};
+DWORD           dwThroughputTbl[MAX_RATE] = {10, 20, 55, 110, 60, 90, 120, 180, 240, 360, 480, 540};
+DWORD           dwThroughput = 0;
+WORD            wIdxUpRate = 0;
+DWORD           dwTxDiff = 0;
+
+    if (pDevice->pMgmt->eScanState != WMAC_NO_SCANNING) {
+        // Don't do Fallback when scanning Channel
+        return;
+    }
+
+    psNodeDBTable->uTimeCount ++;
+
+    if (psNodeDBTable->uTxFail[MAX_RATE] > psNodeDBTable->uTxOk[MAX_RATE])
+        dwTxDiff = psNodeDBTable->uTxFail[MAX_RATE] - psNodeDBTable->uTxOk[MAX_RATE];
+
+    if ((psNodeDBTable->uTxOk[MAX_RATE] < AUTORATE_TXOK_CNT) &&
+        (dwTxDiff < AUTORATE_TXFAIL_CNT) &&
+        (psNodeDBTable->uTimeCount < AUTORATE_TIMEOUT)) {
+        return;
+    }
+
+    if (psNodeDBTable->uTimeCount >= AUTORATE_TIMEOUT) {
+        psNodeDBTable->uTimeCount = 0;
+    }
+
+
+    for(ii=0;ii<MAX_RATE;ii++) {
+        if (psNodeDBTable->wSuppRate & (0x0001<<ii)) {
+            if (bAutoRate[ii] == TRUE) {
+                wIdxUpRate = (WORD) ii;
+            }
+        } else {
+            bAutoRate[ii] = FALSE;
+        }
+    }
+
+    for(ii=0;ii<=psNodeDBTable->wTxDataRate;ii++) {
+        if ( (psNodeDBTable->uTxOk[ii] != 0) ||
+             (psNodeDBTable->uTxFail[ii] != 0) ) {
+            dwThroughputTbl[ii] *= psNodeDBTable->uTxOk[ii];
+            if (ii < RATE_11M) {
+                psNodeDBTable->uTxFail[ii] *= 4;
+            }
+            dwThroughputTbl[ii] /= (psNodeDBTable->uTxOk[ii] + psNodeDBTable->uTxFail[ii]);
+        }
+//        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Rate %d,Ok: %d, Fail:%d, Throughput:%d\n",
+//                       ii, psNodeDBTable->uTxOk[ii], psNodeDBTable->uTxFail[ii], dwThroughputTbl[ii]);
+    }
+    dwThroughput = dwThroughputTbl[psNodeDBTable->wTxDataRate];
+
+    wIdxDownRate = psNodeDBTable->wTxDataRate;
+    for(ii = psNodeDBTable->wTxDataRate; ii > 0;) {
+        ii--;
+        if ( (dwThroughputTbl[ii] > dwThroughput) &&
+             (bAutoRate[ii]==TRUE) ) {
+            dwThroughput = dwThroughputTbl[ii];
+            wIdxDownRate = (WORD) ii;
+        }
+    }
+    psNodeDBTable->wTxDataRate = wIdxDownRate;
+    if (psNodeDBTable->uTxOk[MAX_RATE]) {
+        if (psNodeDBTable->uTxOk[MAX_RATE] >
+           (psNodeDBTable->uTxFail[MAX_RATE] * 4) ) {
+            psNodeDBTable->wTxDataRate = wIdxUpRate;
+        }
+    }else { // adhoc, if uTxOk =0 & uTxFail = 0
+        if (psNodeDBTable->uTxFail[MAX_RATE] == 0)
+            psNodeDBTable->wTxDataRate = wIdxUpRate;
+    }
+//2008-5-8 <add> by chester
+TxRate_iwconfig=psNodeDBTable->wTxDataRate;
+    s_vResetCounter(psNodeDBTable);
+//    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Rate: %d, U:%d, D:%d\n", psNodeDBTable->wTxDataRate, wIdxUpRate, wIdxDownRate);
+
+    return;
+
+}
+
+/*+
+ *
+ * Description:
+ *    This routine is used to assemble available Rate IE.
+ *
+ * Parameters:
+ *  In:
+ *    pDevice
+ *  Out:
+ *
+ * Return Value: None
+ *
+-*/
+BYTE
+RATEuSetIE (
+    IN PWLAN_IE_SUPP_RATES pSrcRates,
+    IN PWLAN_IE_SUPP_RATES pDstRates,
+    IN UINT                uRateLen
+    )
+{
+    UINT ii, uu, uRateCnt = 0;
+
+    if ((pSrcRates == NULL) || (pDstRates == NULL))
+        return 0;
+
+    if (pSrcRates->len == 0)
+        return 0;
+
+    for (ii = 0; ii < uRateLen; ii++) {
+        for (uu = 0; uu < pSrcRates->len; uu++) {
+            if ((pSrcRates->abyRates[uu] & 0x7F) == acbyIERate[ii]) {
+                pDstRates->abyRates[uRateCnt ++] = pSrcRates->abyRates[uu];
+                break;
+            }
+        }
+    }
+    return (BYTE)uRateCnt;
+}
+
diff --git a/drivers/staging/vt6655/datarate.h b/drivers/staging/vt6655/datarate.h
new file mode 100644
index 00000000000..5096f3df499
--- /dev/null
+++ b/drivers/staging/vt6655/datarate.h
@@ -0,0 +1,95 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: datarate.h
+ *
+ * Purpose: Handles the auto fallback & data rates functions
+ *
+ * Author: Lyndon Chen
+ *
+ * Date: July 16, 2002
+ *
+ */
+#ifndef __DATARATE_H__
+#define __DATARATE_H__
+
+/*---------------------  Export Definitions -------------------------*/
+
+#define FALLBACK_PKT_COLLECT_TR_H  50   // pkts
+#define FALLBACK_PKT_COLLECT_TR_L  10   // pkts
+#define FALLBACK_POLL_SECOND       5    // 5 sec
+#define FALLBACK_RECOVER_SECOND    30   // 30 sec
+#define FALLBACK_THRESHOLD         15   // percent
+#define UPGRADE_THRESHOLD          5    // percent
+#define UPGRADE_CNT_THRD           3    // times
+#define RETRY_TIMES_THRD_H         2    // times
+#define RETRY_TIMES_THRD_L         1    // times
+
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+
+/*---------------------  Export Types  ------------------------------*/
+
+
+/*---------------------  Export Functions  --------------------------*/
+
+
+
+VOID
+RATEvParseMaxRate(
+    IN PVOID pDeviceHandler,
+    IN PWLAN_IE_SUPP_RATES pItemRates,
+    IN PWLAN_IE_SUPP_RATES pItemExtRates,
+    IN BOOL bUpdateBasicRate,
+    OUT PWORD pwMaxBasicRate,
+    OUT PWORD pwMaxSuppRate,
+    OUT PWORD pwSuppRate,
+    OUT PBYTE pbyTopCCKRate,
+    OUT PBYTE pbyTopOFDMRate
+    );
+
+VOID
+RATEvTxRateFallBack(
+    IN PVOID pDeviceHandler,
+    IN PKnownNodeDB psNodeDBTable
+    );
+
+BYTE
+RATEuSetIE(
+    IN PWLAN_IE_SUPP_RATES pSrcRates,
+    IN PWLAN_IE_SUPP_RATES pDstRates,
+    IN UINT                uRateLen
+    );
+
+WORD
+wGetRateIdx(
+    IN BYTE byRate
+    );
+
+
+BYTE
+DATARATEbyGetRateIdx(
+    IN BYTE byRate
+    );
+
+
+#endif //__DATARATE_H__
diff --git a/drivers/staging/vt6655/desc.h b/drivers/staging/vt6655/desc.h
new file mode 100644
index 00000000000..c0fc1d3b0a2
--- /dev/null
+++ b/drivers/staging/vt6655/desc.h
@@ -0,0 +1,697 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: desc.h
+ *
+ * Purpose:The header file of descriptor
+ *
+ * Revision History:
+ *
+ * Author: Tevin Chen
+ *
+ * Date: May 21, 1996
+ *
+ */
+
+
+#ifndef __DESC_H__
+#define __DESC_H__
+
+#include <linux/types.h>
+#include <linux/mm.h>
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+#if !defined(__TETHER_H__)
+#include "tether.h"
+#endif
+// #ifdef PRIVATE_OBJ
+//#if !defined(__DEVICE_MODULE_H)
+//#include "device_module.h"
+//#endif
+
+
+
+
+/*---------------------  Export Definitions -------------------------*/
+
+#define B_OWNED_BY_CHIP     1           //
+#define B_OWNED_BY_HOST     0           //
+
+//
+// Bits in the RSR register
+//
+#define RSR_ADDRBROAD       0x80        // 1000 0000
+#define RSR_ADDRMULTI       0x40        // 0100 0000
+#define RSR_ADDRUNI         0x00        // 0000 0000
+#define RSR_IVLDTYP         0x20        // 0010 0000 , invalid packet type
+#define RSR_IVLDLEN         0x10        // 0001 0000 , invalid len (> 2312 byte)
+#define RSR_BSSIDOK         0x08        // 0000 1000
+#define RSR_CRCOK           0x04        // 0000 0100
+#define RSR_BCNSSIDOK       0x02        // 0000 0010
+#define RSR_ADDROK          0x01        // 0000 0001
+
+//
+// Bits in the new RSR register
+//
+#define NEWRSR_DECRYPTOK    0x10        // 0001 0000
+#define NEWRSR_CFPIND       0x08        // 0000 1000
+#define NEWRSR_HWUTSF       0x04        // 0000 0100
+#define NEWRSR_BCNHITAID    0x02        // 0000 0010
+#define NEWRSR_BCNHITAID0   0x01        // 0000 0001
+
+//
+// Bits in the TSR0 register
+//
+#define TSR0_PWRSTS1_2      0xC0        // 1100 0000
+#define TSR0_PWRSTS7        0x20        // 0010 0000
+#define TSR0_NCR            0x1F        // 0001 1111
+
+//
+// Bits in the TSR1 register
+//
+#define TSR1_TERR           0x80        // 1000 0000
+#define TSR1_PWRSTS4_6      0x70        // 0111 0000
+#define TSR1_RETRYTMO       0x08        // 0000 1000
+#define TSR1_TMO            0x04        // 0000 0100
+#define TSR1_PWRSTS3        0x02        // 0000 0010
+#define ACK_DATA            0x01        // 0000 0000
+
+//
+// Bits in the TCR register
+//
+#define EDMSDU              0x04        // 0000 0100 end of sdu
+#define TCR_EDP             0x02        // 0000 0010 end of packet
+#define TCR_STP             0x01        // 0000 0001 start of packet
+
+// max transmit or receive buffer size
+#define CB_MAX_BUF_SIZE     2900U       // max buffer size
+                                        // NOTE: must be multiple of 4
+#define CB_MAX_TX_BUF_SIZE          CB_MAX_BUF_SIZE // max Tx buffer size
+#define CB_MAX_RX_BUF_SIZE_NORMAL   CB_MAX_BUF_SIZE // max Rx buffer size when not use Multi-RD
+
+#define CB_BEACON_BUF_SIZE  512U        // default beacon buffer size
+
+#define CB_MAX_RX_DESC      128         // max # of descriptor
+#define CB_MIN_RX_DESC      16          // min # of rx descriptor
+#define CB_MAX_TX_DESC      64          // max # of descriptor
+#define CB_MIN_TX_DESC      16          // min # of tx descriptor
+
+#define CB_MAX_RECEIVED_PACKETS     16  // max # of received packets at one time
+                                        // limit our receive routine to indicating
+                                        // this many at a time for 2 reasons:
+                                        // 1. driver flow control to protocol layer
+                                        // 2. limit the time used in ISR routine
+
+#define CB_EXTRA_RD_NUM     32          // default # of Extra RD
+#define CB_RD_NUM           32          // default # of RD
+#define CB_TD_NUM           32          // default # of TD
+
+
+// max number of physical segments
+// in a single NDIS packet. Above this threshold, the packet
+// is copied into a single physically contiguous buffer
+#define CB_MAX_SEGMENT      4
+
+#define CB_MIN_MAP_REG_NUM  4
+#define CB_MAX_MAP_REG_NUM  CB_MAX_TX_DESC
+
+#define CB_PROTOCOL_RESERVED_SECTION    16
+
+
+// if retrys excess 15 times , tx will abort, and
+// if tx fifo underflow, tx will fail
+// we should try to resend it
+#define CB_MAX_TX_ABORT_RETRY   3
+
+#ifdef __BIG_ENDIAN
+
+// WMAC definition FIFO Control
+#define FIFOCTL_AUTO_FB_1   0x0010 // 0001 0000 0000 0000
+#define FIFOCTL_AUTO_FB_0   0x0008 // 0000 1000 0000 0000
+#define FIFOCTL_GRPACK      0x0004 // 0000 0100 0000 0000
+#define FIFOCTL_11GA        0x0003 // 0000 0011 0000 0000
+#define FIFOCTL_11GB        0x0002 // 0000 0010 0000 0000
+#define FIFOCTL_11B         0x0001 // 0000 0001 0000 0000
+#define FIFOCTL_11A         0x0000 // 0000 0000 0000 0000
+#define FIFOCTL_RTS         0x8000 // 0000 0000 1000 0000
+#define FIFOCTL_ISDMA0      0x4000 // 0000 0000 0100 0000
+#define FIFOCTL_GENINT      0x2000 // 0000 0000 0010 0000
+#define FIFOCTL_TMOEN       0x1000 // 0000 0000 0001 0000
+#define FIFOCTL_LRETRY      0x0800 // 0000 0000 0000 1000
+#define FIFOCTL_CRCDIS      0x0400 // 0000 0000 0000 0100
+#define FIFOCTL_NEEDACK     0x0200 // 0000 0000 0000 0010
+#define FIFOCTL_LHEAD       0x0100 // 0000 0000 0000 0001
+
+//WMAC definition Frag Control
+#define FRAGCTL_AES         0x0003 // 0000 0011 0000 0000
+#define FRAGCTL_TKIP        0x0002 // 0000 0010 0000 0000
+#define FRAGCTL_LEGACY      0x0001 // 0000 0001 0000 0000
+#define FRAGCTL_NONENCRYPT  0x0000 // 0000 0000 0000 0000
+//#define FRAGCTL_AC3         0x0C00 // 0000 0000 0000 1100
+//#define FRAGCTL_AC2         0x0800 // 0000 0000 0000 1000
+//#define FRAGCTL_AC1         0x0400 // 0000 0000 0000 0100
+//#define FRAGCTL_AC0         0x0000 // 0000 0000 0000 0000
+#define FRAGCTL_ENDFRAG     0x0300 // 0000 0000 0000 0011
+#define FRAGCTL_MIDFRAG     0x0200 // 0000 0000 0000 0010
+#define FRAGCTL_STAFRAG     0x0100 // 0000 0000 0000 0001
+#define FRAGCTL_NONFRAG     0x0000 // 0000 0000 0000 0000
+
+#else
+
+#define FIFOCTL_AUTO_FB_1   0x1000 // 0001 0000 0000 0000
+#define FIFOCTL_AUTO_FB_0   0x0800 // 0000 1000 0000 0000
+#define FIFOCTL_GRPACK      0x0400 // 0000 0100 0000 0000
+#define FIFOCTL_11GA        0x0300 // 0000 0011 0000 0000
+#define FIFOCTL_11GB        0x0200 // 0000 0010 0000 0000
+#define FIFOCTL_11B         0x0100 // 0000 0001 0000 0000
+#define FIFOCTL_11A         0x0000 // 0000 0000 0000 0000
+#define FIFOCTL_RTS         0x0080 // 0000 0000 1000 0000
+#define FIFOCTL_ISDMA0      0x0040 // 0000 0000 0100 0000
+#define FIFOCTL_GENINT      0x0020 // 0000 0000 0010 0000
+#define FIFOCTL_TMOEN       0x0010 // 0000 0000 0001 0000
+#define FIFOCTL_LRETRY      0x0008 // 0000 0000 0000 1000
+#define FIFOCTL_CRCDIS      0x0004 // 0000 0000 0000 0100
+#define FIFOCTL_NEEDACK     0x0002 // 0000 0000 0000 0010
+#define FIFOCTL_LHEAD       0x0001 // 0000 0000 0000 0001
+
+//WMAC definition Frag Control
+#define FRAGCTL_AES         0x0300 // 0000 0011 0000 0000
+#define FRAGCTL_TKIP        0x0200 // 0000 0010 0000 0000
+#define FRAGCTL_LEGACY      0x0100 // 0000 0001 0000 0000
+#define FRAGCTL_NONENCRYPT  0x0000 // 0000 0000 0000 0000
+//#define FRAGCTL_AC3         0x000C // 0000 0000 0000 1100
+//#define FRAGCTL_AC2         0x0008 // 0000 0000 0000 1000
+//#define FRAGCTL_AC1         0x0004 // 0000 0000 0000 0100
+//#define FRAGCTL_AC0         0x0000 // 0000 0000 0000 0000
+#define FRAGCTL_ENDFRAG     0x0003 // 0000 0000 0000 0011
+#define FRAGCTL_MIDFRAG     0x0002 // 0000 0000 0000 0010
+#define FRAGCTL_STAFRAG     0x0001 // 0000 0000 0000 0001
+#define FRAGCTL_NONFRAG     0x0000 // 0000 0000 0000 0000
+
+#endif // #ifdef __BIG_ENDIAN
+
+//#define TYPE_AC0DMA     0
+//#define TYPE_TXDMA0     1
+#define TYPE_TXDMA0     0
+#define TYPE_AC0DMA     1
+#define TYPE_ATIMDMA    2
+#define TYPE_SYNCDMA    3
+#define TYPE_MAXTD      2
+
+#define TYPE_BEACONDMA  4
+
+#define TYPE_RXDMA0     0
+#define TYPE_RXDMA1     1
+#define TYPE_MAXRD      2
+
+
+
+// TD_INFO flags control bit
+#define TD_FLAGS_NETIF_SKB               0x01       // check if need release skb
+#define TD_FLAGS_PRIV_SKB                0x02       // check if called from private skb(hostap)
+#define TD_FLAGS_PS_RETRY                0x04       // check if PS STA frame re-transmit
+//#define TD_FLAGS_NETIF_SKB                0x04
+
+/*---------------------  Export Types  ------------------------------*/
+
+// ref_sk_buff is used for mapping the skb structure between pre-built driver-obj & running kernel.
+// Since different kernel version (2.4x) may change skb structure, i.e. pre-built driver-obj
+// may link to older skb that leads error.
+
+typedef struct tagDEVICE_RD_INFO {
+    struct sk_buff* skb;
+#ifdef PRIVATE_OBJ
+    ref_sk_buff ref_skb;
+#endif
+    dma_addr_t  skb_dma;
+    dma_addr_t  curr_desc;
+} DEVICE_RD_INFO,   *PDEVICE_RD_INFO;
+
+/*
+static inline PDEVICE_RD_INFO alloc_rd_info(void) {
+    PDEVICE_RD_INFO  ptr;
+    if ((ptr = kmalloc(sizeof(DEVICE_RD_INFO), GFP_ATOMIC)) == NULL)
+        return NULL;
+    else {
+        memset(ptr,0,sizeof(DEVICE_RD_INFO));
+        return ptr;
+    }
+}
+*/
+
+/*
+typedef struct tagRDES0 {
+    WORD    wResCount;
+    WORD    wf1Owner ;
+//    WORD    f15Reserved : 15;
+//    WORD    f1Owner : 1;
+} __attribute__ ((__packed__))
+SRDES0;
+*/
+
+#ifdef __BIG_ENDIAN
+
+typedef struct tagRDES0 {
+   volatile WORD    wResCount;
+	union {
+		volatile U16    f15Reserved;
+		struct {
+            volatile U8 f8Reserved1;
+			volatile U8 f1Owner:1;
+			volatile U8 f7Reserved:7;
+		} __attribute__ ((__packed__));
+	} __attribute__ ((__packed__));
+} __attribute__ ((__packed__))
+SRDES0, *PSRDES0;
+
+#else
+
+typedef struct tagRDES0 {
+    WORD    wResCount;
+    WORD    f15Reserved : 15;
+    WORD    f1Owner : 1;
+} __attribute__ ((__packed__))
+SRDES0;
+
+
+#endif
+
+typedef struct tagRDES1 {
+    WORD   wReqCount;
+    WORD   wReserved;
+} __attribute__ ((__packed__))
+SRDES1;
+
+//
+// Rx descriptor
+//
+typedef struct tagSRxDesc {
+    volatile SRDES0 m_rd0RD0;
+    volatile SRDES1 m_rd1RD1;
+    volatile U32    buff_addr;
+    volatile U32    next_desc;
+    struct tagSRxDesc   *next;//4 bytes
+    volatile PDEVICE_RD_INFO    pRDInfo;//4 bytes
+    volatile U32    Reserved[2];//8 bytes
+} __attribute__ ((__packed__))
+SRxDesc, DEF* PSRxDesc;
+typedef const SRxDesc DEF*      PCSRxDesc;
+
+#ifdef __BIG_ENDIAN
+
+/*
+typedef struct tagTDES0 {
+    volatile    BYTE    byTSR0;
+    volatile    BYTE    byTSR1;
+    volatile    WORD    wOwner_Txtime;
+//    volatile    WORD    f15Txtime : 15;
+//    volatile    WORD    f1Owner:1;
+} __attribute__ ((__packed__))
+STDES0;
+*/
+
+typedef struct tagTDES0 {
+    volatile    BYTE    byTSR0;
+    volatile    BYTE    byTSR1;
+	union {
+		volatile U16    f15Txtime;
+		struct {
+            volatile U8 f8Reserved1;
+			volatile U8 f1Owner:1;
+			volatile U8 f7Reserved:7;
+		} __attribute__ ((__packed__));
+	} __attribute__ ((__packed__));
+} __attribute__ ((__packed__))
+STDES0, PSTDES0;
+
+#else
+
+typedef struct tagTDES0 {
+    volatile    BYTE    byTSR0;
+    volatile    BYTE    byTSR1;
+    volatile    WORD    f15Txtime : 15;
+    volatile    WORD    f1Owner:1;
+} __attribute__ ((__packed__))
+STDES0;
+
+#endif
+
+
+typedef struct tagTDES1 {
+    volatile    WORD    wReqCount;
+    volatile    BYTE    byTCR;
+    volatile    BYTE    byReserved;
+} __attribute__ ((__packed__))
+STDES1;
+
+
+typedef struct tagDEVICE_TD_INFO{
+    struct sk_buff*     skb;
+    PBYTE               buf;
+    dma_addr_t          skb_dma;
+    dma_addr_t          buf_dma;
+    dma_addr_t          curr_desc;
+    DWORD               dwReqCount;
+    DWORD               dwHeaderLength;
+    BYTE                byFlags;
+} DEVICE_TD_INFO,    *PDEVICE_TD_INFO;
+
+/*
+static inline PDEVICE_TD_INFO alloc_td_info(void) {
+    PDEVICE_TD_INFO  ptr;
+    if ((ptr = kmalloc(sizeof(DEVICE_TD_INFO),GFP_ATOMIC))==NULL)
+        return NULL;
+    else {
+        memset(ptr,0,sizeof(DEVICE_TD_INFO));
+        return ptr;
+    }
+}
+*/
+
+//
+// transmit descriptor
+//
+typedef struct tagSTxDesc {
+    volatile    STDES0  m_td0TD0;
+    volatile    STDES1  m_td1TD1;
+    volatile    U32    buff_addr;
+    volatile    U32    next_desc;
+    struct tagSTxDesc*  next; //4 bytes
+    volatile    PDEVICE_TD_INFO pTDInfo;//4 bytes
+    volatile    U32    Reserved[2];//8 bytes
+} __attribute__ ((__packed__))
+STxDesc, DEF* PSTxDesc;
+typedef const STxDesc DEF*      PCSTxDesc;
+
+
+typedef struct tagSTxSyncDesc {
+    volatile    STDES0  m_td0TD0;
+    volatile    STDES1  m_td1TD1;
+    volatile    DWORD   buff_addr; // pointer to logical buffer
+    volatile    DWORD   next_desc; // pointer to next logical descriptor
+    volatile    WORD    m_wFIFOCtl;
+    volatile    WORD    m_wTimeStamp;
+    struct tagSTxSyncDesc*  next; //4 bytes
+    volatile    PDEVICE_TD_INFO pTDInfo;//4 bytes
+    volatile    DWORD   m_dwReserved2;
+} __attribute__ ((__packed__))
+STxSyncDesc, DEF* PSTxSyncDesc;
+typedef const STxSyncDesc DEF*      PCSTxSyncDesc;
+
+
+//
+// RsvTime buffer header
+//
+typedef struct tagSRrvTime_gRTS {
+    WORD        wRTSTxRrvTime_ba;
+    WORD        wRTSTxRrvTime_aa;
+    WORD        wRTSTxRrvTime_bb;
+    WORD        wReserved;
+    WORD        wTxRrvTime_b;
+    WORD        wTxRrvTime_a;
+}__attribute__ ((__packed__))
+SRrvTime_gRTS, DEF* PSRrvTime_gRTS;
+typedef const SRrvTime_gRTS DEF*     PCSRrvTime_gRTS;
+
+typedef struct tagSRrvTime_gCTS {
+    WORD        wCTSTxRrvTime_ba;
+    WORD        wReserved;
+    WORD        wTxRrvTime_b;
+    WORD        wTxRrvTime_a;
+}__attribute__ ((__packed__))
+SRrvTime_gCTS, DEF* PSRrvTime_gCTS;
+typedef const SRrvTime_gCTS DEF*     PCSRrvTime_gCTS;
+
+typedef struct tagSRrvTime_ab {
+    WORD        wRTSTxRrvTime;
+    WORD        wTxRrvTime;
+}__attribute__ ((__packed__))
+SRrvTime_ab, DEF* PSRrvTime_ab;
+typedef const SRrvTime_ab DEF*     PCSRrvTime_ab;
+
+typedef struct tagSRrvTime_atim {
+    WORD        wCTSTxRrvTime_ba;
+    WORD        wTxRrvTime_a;
+}__attribute__ ((__packed__))
+SRrvTime_atim, DEF* PSRrvTime_atim;
+typedef const SRrvTime_atim DEF*     PCSRrvTime_atim;
+
+//
+// RTS buffer header
+//
+typedef struct tagSRTSData {
+    WORD    wFrameControl;
+    WORD    wDurationID;
+    BYTE    abyRA[U_ETHER_ADDR_LEN];
+    BYTE    abyTA[U_ETHER_ADDR_LEN];
+}__attribute__ ((__packed__))
+SRTSData, DEF* PSRTSData;
+typedef const SRTSData DEF*      PCSRTSData;
+
+typedef struct tagSRTS_g {
+    BYTE        bySignalField_b;
+    BYTE        byServiceField_b;
+    WORD        wTransmitLength_b;
+    BYTE        bySignalField_a;
+    BYTE        byServiceField_a;
+    WORD        wTransmitLength_a;
+    WORD        wDuration_ba;
+    WORD        wDuration_aa;
+    WORD        wDuration_bb;
+    WORD        wReserved;
+    SRTSData    Data;
+}__attribute__ ((__packed__))
+SRTS_g, DEF* PSRTS_g;
+typedef const SRTS_g DEF*     PCSRTS_g;
+
+
+typedef struct tagSRTS_g_FB {
+    BYTE        bySignalField_b;
+    BYTE        byServiceField_b;
+    WORD        wTransmitLength_b;
+    BYTE        bySignalField_a;
+    BYTE        byServiceField_a;
+    WORD        wTransmitLength_a;
+    WORD        wDuration_ba;
+    WORD        wDuration_aa;
+    WORD        wDuration_bb;
+    WORD        wReserved;
+    WORD        wRTSDuration_ba_f0;
+    WORD        wRTSDuration_aa_f0;
+    WORD        wRTSDuration_ba_f1;
+    WORD        wRTSDuration_aa_f1;
+    SRTSData    Data;
+}__attribute__ ((__packed__))
+SRTS_g_FB, DEF* PSRTS_g_FB;
+typedef const SRTS_g_FB DEF*     PCSRTS_g_FB;
+
+
+typedef struct tagSRTS_ab {
+    BYTE        bySignalField;
+    BYTE        byServiceField;
+    WORD        wTransmitLength;
+    WORD        wDuration;
+    WORD        wReserved;
+    SRTSData    Data;
+}__attribute__ ((__packed__))
+SRTS_ab, DEF* PSRTS_ab;
+typedef const SRTS_ab DEF*     PCSRTS_ab;
+
+
+typedef struct tagSRTS_a_FB {
+    BYTE        bySignalField;
+    BYTE        byServiceField;
+    WORD        wTransmitLength;
+    WORD        wDuration;
+    WORD        wReserved;
+    WORD        wRTSDuration_f0;
+    WORD        wRTSDuration_f1;
+    SRTSData    Data;
+}__attribute__ ((__packed__))
+SRTS_a_FB, DEF* PSRTS_a_FB;
+typedef const SRTS_a_FB DEF*     PCSRTS_a_FB;
+
+
+//
+// CTS buffer header
+//
+typedef struct tagSCTSData {
+    WORD    wFrameControl;
+    WORD    wDurationID;
+    BYTE    abyRA[U_ETHER_ADDR_LEN];
+    WORD    wReserved;
+}__attribute__ ((__packed__))
+SCTSData, DEF* PSCTSData;
+
+typedef struct tagSCTS {
+    BYTE        bySignalField_b;
+    BYTE        byServiceField_b;
+    WORD        wTransmitLength_b;
+    WORD        wDuration_ba;
+    WORD        wReserved;
+    SCTSData    Data;
+}__attribute__ ((__packed__))
+SCTS, DEF* PSCTS;
+typedef const SCTS DEF*     PCSCTS;
+
+typedef struct tagSCTS_FB {
+    BYTE        bySignalField_b;
+    BYTE        byServiceField_b;
+    WORD        wTransmitLength_b;
+    WORD        wDuration_ba;
+    WORD        wReserved;
+    WORD        wCTSDuration_ba_f0;
+    WORD        wCTSDuration_ba_f1;
+    SCTSData    Data;
+}__attribute__ ((__packed__))
+SCTS_FB, DEF* PSCTS_FB;
+typedef const SCTS_FB DEF*     PCSCTS_FB;
+
+
+//
+// Tx FIFO header
+//
+typedef struct tagSTxBufHead {
+    DWORD   adwTxKey[4];
+    WORD    wFIFOCtl;
+    WORD    wTimeStamp;
+    WORD    wFragCtl;
+    BYTE    byTxPower;
+    BYTE    wReserved;
+}__attribute__ ((__packed__))
+STxBufHead, DEF* PSTxBufHead;
+typedef const STxBufHead DEF*   PCSTxBufHead;
+
+typedef struct tagSTxShortBufHead {
+    WORD    wFIFOCtl;
+    WORD    wTimeStamp;
+}__attribute__ ((__packed__))
+STxShortBufHead, DEF* PSTxShortBufHead;
+typedef const STxShortBufHead DEF*   PCSTxShortBufHead;
+
+//
+// Tx data header
+//
+typedef struct tagSTxDataHead_g {
+    BYTE    bySignalField_b;
+    BYTE    byServiceField_b;
+    WORD    wTransmitLength_b;
+    BYTE    bySignalField_a;
+    BYTE    byServiceField_a;
+    WORD    wTransmitLength_a;
+    WORD    wDuration_b;
+    WORD    wDuration_a;
+    WORD    wTimeStampOff_b;
+    WORD    wTimeStampOff_a;
+}__attribute__ ((__packed__))
+STxDataHead_g, DEF* PSTxDataHead_g;
+typedef const STxDataHead_g DEF*  PCSTxDataHead_g;
+
+typedef struct tagSTxDataHead_g_FB {
+    BYTE    bySignalField_b;
+    BYTE    byServiceField_b;
+    WORD    wTransmitLength_b;
+    BYTE    bySignalField_a;
+    BYTE    byServiceField_a;
+    WORD    wTransmitLength_a;
+    WORD    wDuration_b;
+    WORD    wDuration_a;
+    WORD    wDuration_a_f0;
+    WORD    wDuration_a_f1;
+    WORD    wTimeStampOff_b;
+    WORD    wTimeStampOff_a;
+}__attribute__ ((__packed__))
+STxDataHead_g_FB, DEF* PSTxDataHead_g_FB;
+typedef const STxDataHead_g_FB DEF*  PCSTxDataHead_g_FB;
+
+
+typedef struct tagSTxDataHead_ab {
+    BYTE    bySignalField;
+    BYTE    byServiceField;
+    WORD    wTransmitLength;
+    WORD    wDuration;
+    WORD    wTimeStampOff;
+}__attribute__ ((__packed__))
+STxDataHead_ab, DEF* PSTxDataHead_ab;
+typedef const STxDataHead_ab DEF*  PCSTxDataHead_ab;
+
+
+typedef struct tagSTxDataHead_a_FB {
+    BYTE    bySignalField;
+    BYTE    byServiceField;
+    WORD    wTransmitLength;
+    WORD    wDuration;
+    WORD    wTimeStampOff;
+    WORD    wDuration_f0;
+    WORD    wDuration_f1;
+}__attribute__ ((__packed__))
+STxDataHead_a_FB, DEF* PSTxDataHead_a_FB;
+typedef const STxDataHead_a_FB DEF*  PCSTxDataHead_a_FB;
+
+//
+// MICHDR data header
+//
+typedef struct tagSMICHDRHead {
+    DWORD   adwHDR0[4];
+    DWORD   adwHDR1[4];
+    DWORD   adwHDR2[4];
+}__attribute__ ((__packed__))
+SMICHDRHead, DEF* PSMICHDRHead;
+typedef const SMICHDRHead DEF*   PCSMICHDRHead;
+
+typedef struct tagSBEACONCtl {
+    DWORD   BufReady : 1;
+    DWORD   TSF      : 15;
+    DWORD   BufLen   : 11;
+    DWORD   Reserved : 5;
+}__attribute__ ((__packed__))
+SBEACONCtl;
+
+
+typedef struct tagSSecretKey {
+    DWORD   dwLowDword;
+    BYTE    byHighByte;
+}__attribute__ ((__packed__))
+SSecretKey;
+
+typedef struct tagSKeyEntry {
+    BYTE  abyAddrHi[2];
+    WORD  wKCTL;
+    BYTE  abyAddrLo[4];
+    DWORD dwKey0[4];
+    DWORD dwKey1[4];
+    DWORD dwKey2[4];
+    DWORD dwKey3[4];
+    DWORD dwKey4[4];
+}__attribute__ ((__packed__))
+SKeyEntry;
+/*---------------------  Export Macros ------------------------------*/
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+
+
+
+
+#endif // __DESC_H__
+
diff --git a/drivers/staging/vt6655/device.h b/drivers/staging/vt6655/device.h
new file mode 100644
index 00000000000..264d1bb2ff7
--- /dev/null
+++ b/drivers/staging/vt6655/device.h
@@ -0,0 +1,1063 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: device.h
+ *
+ * Purpose: MAC Data structure
+ *
+ * Author: Tevin Chen
+ *
+ * Date: Mar 17, 1997
+ *
+ */
+
+#ifndef __DEVICE_H__
+#define __DEVICE_H__
+
+#ifdef MODULE
+#ifdef MODVERSIONS
+#include <linux/modversions.h>
+#endif /* MODVERSIONS */
+#include <linux/module.h>
+#endif /* MODULE */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/version.h>
+#include <linux/string.h>
+#include <linux/wait.h>
+#include <linux/if_arp.h>
+#include <linux/sched.h>
+#include <asm/io.h>
+#include <linux/if.h>
+//#include <linux/config.h>
+#include <asm/uaccess.h>
+#include <linux/proc_fs.h>
+#include <linux/inetdevice.h>
+#include <linux/reboot.h>
+#ifdef SIOCETHTOOL
+#define DEVICE_ETHTOOL_IOCTL_SUPPORT
+#include <linux/ethtool.h>
+#else
+#undef DEVICE_ETHTOOL_IOCTL_SUPPORT
+#endif
+/* Include Wireless Extension definition and check version - Jean II */
+#include <linux/wireless.h>
+#if WIRELESS_EXT > 12
+#include <net/iw_handler.h>	// New driver API
+#endif	/* WIRELESS_EXT > 12 */
+
+//2008-0409-07, <Add> by Einsn Liu
+#if WIRELESS_EXT > 17
+#ifndef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+#define WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+#endif
+#endif
+//2008-4-14<add> by chester for led issue
+//#define FOR_LED_ON_NOTEBOOK
+//
+
+
+
+//  device specific
+//
+#if !defined(_KCOMPAT_H)
+#include "kcompat.h"
+#endif
+
+#if !defined(__DEVICE_CONFIG_H)
+#include "device_cfg.h"
+#endif
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+#if !defined(__80211HDR_H__)
+#include "80211hdr.h"
+#endif
+#if !defined(__TETHER_H__)
+#include "tether.h"
+#endif
+#if !defined(__WMGR_H__)
+#include "wmgr.h"
+#endif
+#if !defined(__WCMD_H__)
+#include "wcmd.h"
+#endif
+#if !defined(__MIB_H__)
+#include "mib.h"
+#endif
+#if !defined(__SROM_H__)
+#include "srom.h"
+#endif
+#if !defined(__RC4_H__)
+#include "rc4.h"
+#endif
+#if !defined(__TPCI_H__)
+#include "tpci.h"
+#endif
+#if !defined(__DESC_H__)
+#include "desc.h"
+#endif
+
+#if !defined(__KEY_H__)
+#include "key.h"
+#endif
+
+#if !defined(__MAC_H__)
+#include "mac.h"
+#endif
+
+//PLICE_DEBUG->
+//#define		THREAD
+
+//#define	TASK_LET
+//PLICE_DEBUG<-
+
+// #ifdef PRIVATE_OBJ
+//#if !defined(__DEVICE_MODULE_H)
+//#include "device_module.h"
+//#endif
+
+
+/*---------------------  Export Definitions -------------------------*/
+
+#define MAC_MAX_CONTEXT_REG     (256+128)
+
+#define MAX_MULTICAST_ADDRESS_NUM       32
+#define MULTICAST_ADDRESS_LIST_SIZE     (MAX_MULTICAST_ADDRESS_NUM * U_ETHER_ADDR_LEN)
+
+
+//#define OP_MODE_INFRASTRUCTURE  0
+//#define OP_MODE_ADHOC           1
+//#define OP_MODE_AP              2
+
+#define DUPLICATE_RX_CACHE_LENGTH       5
+
+#define NUM_KEY_ENTRY                   11
+
+#define TX_WEP_NONE                     0
+#define TX_WEP_OTF                      1
+#define TX_WEP_SW                       2
+#define TX_WEP_SWOTP                    3
+#define TX_WEP_OTPSW                    4
+#define TX_WEP_SW232                    5
+
+#define KEYSEL_WEP40                    0
+#define KEYSEL_WEP104                   1
+#define KEYSEL_TKIP                     2
+#define KEYSEL_CCMP                     3
+
+
+
+#define AUTO_FB_NONE            0
+#define AUTO_FB_0               1
+#define AUTO_FB_1               2
+
+#define FB_RATE0                0
+#define FB_RATE1                1
+
+// Antenna Mode
+#define ANT_A                   0
+#define ANT_B                   1
+#define ANT_DIVERSITY           2
+#define ANT_RXD_TXA             3
+#define ANT_RXD_TXB             4
+#define ANT_UNKNOWN             0xFF
+
+#define MAXCHECKHANGCNT         4
+
+#define BB_VGA_LEVEL            4
+#define BB_VGA_CHANGE_THRESHOLD 16
+
+
+#ifndef RUN_AT
+#define RUN_AT(x)                       (jiffies+(x))
+#endif
+
+// DMA related
+#define RESERV_AC0DMA                   4
+
+
+// BUILD OBJ mode
+#ifdef PRIVATE_OBJ
+
+#undef dev_kfree_skb
+#undef dev_kfree_skb_irq
+#undef dev_alloc_skb
+#undef kfree
+#undef del_timer
+#undef init_timer
+#undef add_timer
+#undef kmalloc
+#undef netif_stop_queue
+#undef netif_start_queue
+#undef netif_wake_queue
+#undef netif_queue_stopped
+#undef netif_rx
+#undef netif_running
+#undef udelay
+#undef mdelay
+#undef eth_type_trans
+#undef skb_put
+#undef HZ
+#undef RUN_AT
+#undef pci_alloc_consistent
+#undef pci_free_consistent
+#undef register_netdevice
+#undef register_netdev
+#undef unregister_netdevice
+#undef unregister_netdev
+#undef skb_queue_head_init
+#undef skb_queue_tail
+#undef skb_queue_empty
+#undef free_irq
+#undef copy_from_user
+#undef copy_to_user
+#undef spin_lock_init
+#undef pci_map_single
+#undef pci_unmap_single
+
+// redefine kernel dependent fucntion
+#define dev_kfree_skb       ref_dev_kfree_skb
+#define dev_kfree_skb_irq   ref_dev_kfree_skb_irq
+#define dev_alloc_skb       ref_dev_alloc_skb
+#define kfree               ref_kfree
+#define del_timer           ref_del_timer
+#define init_timer          ref_init_timer
+#define add_timer           ref_add_timer
+#define kmalloc             ref_kmalloc
+#define netif_stop_queue    ref_netif_stop_queue
+#define netif_start_queue   ref_netif_start_queue
+#define netif_wake_queue    ref_netif_wake_queue
+#define netif_queue_stopped ref_netif_queue_stopped
+#define netif_rx            ref_netif_rx
+#define netif_running       ref_netif_running
+#define udelay              ref_udelay
+#define mdelay              ref_mdelay
+#define get_jiffies()       ref_get_jiffies()
+#define RUN_AT(x)           (get_jiffies()+(x))
+#define HZ                  ref_HZ_tick()
+#define eth_type_trans      ref_eth_type_trans
+#define skb_put             ref_skb_put
+#define skb_queue_head_init ref_skb_queue_head_init
+#define skb_queue_tail      ref_skb_queue_tail
+#define skb_queue_empty     ref_skb_queue_empty
+
+#define pci_alloc_consistent    ref_pci_alloc_consistent
+#define pci_free_consistent     ref_pci_free_consistent
+#define register_netdevice      ref_register_netdevice
+#define register_netdev         ref_register_netdev
+#define unregister_netdevice    ref_unregister_netdevice
+#define unregister_netdev       ref_unregister_netdev
+
+#define free_irq                ref_free_irq
+#define copy_from_user          ref_copy_from_user
+#define copy_to_user            ref_copy_to_user
+#define spin_lock_init          ref_spin_lock_init
+#define pci_map_single          ref_pci_map_single
+#define pci_unmap_single        ref_pci_unmap_single
+#endif
+
+
+#ifdef PRIVATE_OBJ
+#undef  printk
+#define DEVICE_PRT(l, p, args...) {if (l<=msglevel) do {} while (0);}
+//#define DEVICE_PRT(l, p, args...) {if (l<=msglevel) printk( p ,##args);}
+#else
+#define DEVICE_PRT(l, p, args...) {if (l<=msglevel) printk( p ,##args);}
+#endif
+
+
+#define	AVAIL_TD(p,q)	((p)->sOpts.nTxDescs[(q)]-((p)->iTDUsed[(q)]))
+
+//PLICE_DEBUG ->
+#define	NUM				64
+//PLICE_DEUBG <-
+
+
+
+/*---------------------  Export Types  ------------------------------*/
+
+
+//0:11A 1:11B 2:11G
+typedef enum _VIA_BB_TYPE
+{
+    BB_TYPE_11A=0,
+    BB_TYPE_11B,
+    BB_TYPE_11G
+} VIA_BB_TYPE, *PVIA_BB_TYPE;
+
+//0:11a,1:11b,2:11gb(only CCK in BasicRate),3:11ga(OFDM in Basic Rate)
+typedef enum _VIA_PKT_TYPE
+{
+    PK_TYPE_11A=0,
+    PK_TYPE_11B,
+    PK_TYPE_11GB,
+    PK_TYPE_11GA
+} VIA_PKT_TYPE, *PVIA_PKT_TYPE;
+
+
+typedef enum __device_msg_level {
+    MSG_LEVEL_ERR=0,            //Errors that will cause abnormal operation.
+    MSG_LEVEL_NOTICE=1,         //Some errors need users to be notified.
+    MSG_LEVEL_INFO=2,           //Normal message.
+    MSG_LEVEL_VERBOSE=3,        //Will report all trival errors.
+    MSG_LEVEL_DEBUG=4           //Only for debug purpose.
+} DEVICE_MSG_LEVEL, *PDEVICE_MSG_LEVEL;
+
+typedef enum __device_init_type {
+    DEVICE_INIT_COLD=0,         // cold init
+    DEVICE_INIT_RESET,          // reset init or Dx to D0 power remain init
+    DEVICE_INIT_DXPL            // Dx to D0 power lost init
+} DEVICE_INIT_TYPE, *PDEVICE_INIT_TYPE;
+
+
+//++ NDIS related
+
+#define MAX_BSSIDINFO_4_PMKID   16
+#define MAX_PMKIDLIST           5
+//Flags for PMKID Candidate list structure
+#define NDIS_802_11_PMKID_CANDIDATE_PREAUTH_ENABLED	0x01
+
+// PMKID Structures
+typedef UCHAR   NDIS_802_11_PMKID_VALUE[16];
+
+
+typedef enum _NDIS_802_11_WEP_STATUS
+{
+    Ndis802_11WEPEnabled,
+    Ndis802_11Encryption1Enabled = Ndis802_11WEPEnabled,
+    Ndis802_11WEPDisabled,
+    Ndis802_11EncryptionDisabled = Ndis802_11WEPDisabled,
+    Ndis802_11WEPKeyAbsent,
+    Ndis802_11Encryption1KeyAbsent = Ndis802_11WEPKeyAbsent,
+    Ndis802_11WEPNotSupported,
+    Ndis802_11EncryptionNotSupported = Ndis802_11WEPNotSupported,
+    Ndis802_11Encryption2Enabled,
+    Ndis802_11Encryption2KeyAbsent,
+    Ndis802_11Encryption3Enabled,
+    Ndis802_11Encryption3KeyAbsent
+} NDIS_802_11_WEP_STATUS, *PNDIS_802_11_WEP_STATUS,
+  NDIS_802_11_ENCRYPTION_STATUS, *PNDIS_802_11_ENCRYPTION_STATUS;
+
+
+typedef enum _NDIS_802_11_STATUS_TYPE
+{
+    Ndis802_11StatusType_Authentication,
+    Ndis802_11StatusType_MediaStreamMode,
+    Ndis802_11StatusType_PMKID_CandidateList,
+    Ndis802_11StatusTypeMax    // not a real type, defined as an upper bound
+} NDIS_802_11_STATUS_TYPE, *PNDIS_802_11_STATUS_TYPE;
+
+//Added new types for PMKID Candidate lists.
+typedef struct _PMKID_CANDIDATE {
+    NDIS_802_11_MAC_ADDRESS BSSID;
+    ULONG Flags;
+} PMKID_CANDIDATE, *PPMKID_CANDIDATE;
+
+
+typedef struct _BSSID_INFO
+{
+    NDIS_802_11_MAC_ADDRESS BSSID;
+    NDIS_802_11_PMKID_VALUE PMKID;
+} BSSID_INFO, *PBSSID_INFO;
+
+typedef struct tagSPMKID {
+    ULONG Length;
+    ULONG BSSIDInfoCount;
+    BSSID_INFO BSSIDInfo[MAX_BSSIDINFO_4_PMKID];
+} SPMKID, *PSPMKID;
+
+typedef struct tagSPMKIDCandidateEvent {
+    NDIS_802_11_STATUS_TYPE     StatusType;
+    ULONG Version;       // Version of the structure
+    ULONG NumCandidates; // No. of pmkid candidates
+    PMKID_CANDIDATE CandidateList[MAX_PMKIDLIST];
+} SPMKIDCandidateEvent, DEF* PSPMKIDCandidateEvent;
+
+
+//--
+
+//++ 802.11h related
+#define MAX_QUIET_COUNT     8
+
+typedef struct tagSQuietControl {
+    BOOL        bEnable;
+    DWORD       dwStartTime;
+    BYTE        byPeriod;
+    WORD        wDuration;
+} SQuietControl, DEF* PSQuietControl;
+
+//--
+typedef struct __chip_info_tbl{
+    CHIP_TYPE   chip_id;
+    char*       name;
+    int         io_size;
+    int         nTxQueue;
+    U32         flags;
+} CHIP_INFO, *PCHIP_INFO;
+
+
+typedef enum {
+    OWNED_BY_HOST=0,
+    OWNED_BY_NIC=1
+} DEVICE_OWNER_TYPE, *PDEVICE_OWNER_TYPE;
+
+
+// The receive duplicate detection cache entry
+typedef struct tagSCacheEntry{
+    WORD        wFmSequence;
+    BYTE        abyAddr2[U_ETHER_ADDR_LEN];
+} SCacheEntry, *PSCacheEntry;
+
+
+typedef struct tagSCache{
+/* The receive cache is updated circularly.  The next entry to be written is
+ * indexed by the "InPtr".
+*/
+    UINT            uInPtr;         // Place to use next
+    SCacheEntry     asCacheEntry[DUPLICATE_RX_CACHE_LENGTH];
+} SCache, *PSCache;
+
+#define CB_MAX_RX_FRAG                 64
+// DeFragment Control Block, used for collecting fragments prior to reassembly
+typedef struct tagSDeFragControlBlock
+{
+    WORD            wSequence;
+    WORD            wFragNum;
+    BYTE            abyAddr2[U_ETHER_ADDR_LEN];
+	UINT            uLifetime;
+    struct sk_buff* skb;
+#ifdef PRIVATE_OBJ
+    ref_sk_buff     ref_skb;
+#endif
+    PBYTE           pbyRxBuffer;
+    UINT            cbFrameLength;
+    BOOL            bInUse;
+} SDeFragControlBlock, DEF* PSDeFragControlBlock;
+
+
+
+
+//flags for options
+#define     DEVICE_FLAGS_IP_ALIGN        0x00000001UL
+#define     DEVICE_FLAGS_PREAMBLE_TYPE   0x00000002UL
+#define     DEVICE_FLAGS_OP_MODE         0x00000004UL
+#define     DEVICE_FLAGS_PS_MODE         0x00000008UL
+#define		DEVICE_FLAGS_80211h_MODE	 0x00000010UL
+#define		DEVICE_FLAGS_DiversityANT	 0x00000020UL
+
+//flags for driver status
+#define     DEVICE_FLAGS_OPENED          0x00010000UL
+#define     DEVICE_FLAGS_WOL_ENABLED     0x00080000UL
+//flags for capbilities
+#define     DEVICE_FLAGS_TX_ALIGN        0x01000000UL
+#define     DEVICE_FLAGS_HAVE_CAM        0x02000000UL
+#define     DEVICE_FLAGS_FLOW_CTRL       0x04000000UL
+
+//flags for MII status
+#define     DEVICE_LINK_FAIL             0x00000001UL
+#define     DEVICE_SPEED_10              0x00000002UL
+#define     DEVICE_SPEED_100             0x00000004UL
+#define     DEVICE_SPEED_1000            0x00000008UL
+#define     DEVICE_DUPLEX_FULL           0x00000010UL
+#define     DEVICE_AUTONEG_ENABLE        0x00000020UL
+#define     DEVICE_FORCED_BY_EEPROM      0x00000040UL
+//for device_set_media_duplex
+#define     DEVICE_LINK_CHANGE           0x00000001UL
+
+
+//PLICE_DEBUG->
+
+
+typedef	struct _RxManagementQueue
+{
+	int	packet_num;
+	int	head,tail;
+	PSRxMgmtPacket	Q[NUM];
+} RxManagementQueue,*PSRxManagementQueue;
+
+
+
+//PLICE_DEBUG<-
+
+
+typedef struct __device_opt {
+    int         nRxDescs0;      //Number of RX descriptors0
+    int         nRxDescs1;      //Number of RX descriptors1
+    int         nTxDescs[2];    //Number of TX descriptors 0, 1
+    int         int_works;      //interrupt limits
+    int         rts_thresh;     //rts threshold
+    int         frag_thresh;
+    int         data_rate;
+    int         channel_num;
+    int         short_retry;
+    int         long_retry;
+    int         bbp_type;
+    U32         flags;
+} OPTIONS, *POPTIONS;
+
+
+typedef struct __device_info {
+    struct __device_info*        next;
+    struct __device_info*        prev;
+
+    struct pci_dev*             pcid;
+
+#if CONFIG_PM
+    u32                         pci_state[16];
+#endif
+
+// netdev
+    struct net_device*          dev;
+    struct net_device*          next_module;
+    struct net_device_stats     stats;
+
+//dma addr, rx/tx pool
+    dma_addr_t                  pool_dma;
+    dma_addr_t                  rd0_pool_dma;
+    dma_addr_t                  rd1_pool_dma;
+
+    dma_addr_t                  td0_pool_dma;
+    dma_addr_t                  td1_pool_dma;
+
+    dma_addr_t                  tx_bufs_dma0;
+    dma_addr_t                  tx_bufs_dma1;
+    dma_addr_t                  tx_beacon_dma;
+
+    PBYTE                       tx0_bufs;
+    PBYTE                       tx1_bufs;
+    PBYTE                       tx_beacon_bufs;
+
+    CHIP_TYPE                   chip_id;
+
+    U32                         PortOffset;
+    DWORD                       dwIsr;
+    U32                         memaddr;
+    U32                         ioaddr;
+    U32                         io_size;
+
+    BYTE                        byRevId;
+    WORD                        SubSystemID;
+    WORD                        SubVendorID;
+
+    int                         nTxQueues;
+    volatile int                iTDUsed[TYPE_MAXTD];
+
+    volatile PSTxDesc           apCurrTD[TYPE_MAXTD];
+    volatile PSTxDesc           apTailTD[TYPE_MAXTD];
+
+    volatile PSTxDesc           apTD0Rings;
+    volatile PSTxDesc           apTD1Rings;
+
+    volatile PSRxDesc           aRD0Ring;
+    volatile PSRxDesc           aRD1Ring;
+    volatile PSRxDesc           pCurrRD[TYPE_MAXRD];
+    SCache                      sDupRxCache;
+
+    SDeFragControlBlock         sRxDFCB[CB_MAX_RX_FRAG];
+    UINT                        cbDFCB;
+    UINT                        cbFreeDFCB;
+    UINT                        uCurrentDFCBIdx;
+
+    OPTIONS                     sOpts;
+
+    U32                         flags;
+
+    U32                         rx_buf_sz;
+    int                         multicast_limit;
+    BYTE                        byRxMode;
+
+    spinlock_t                  lock;
+//PLICE_DEBUG->
+	struct	tasklet_struct 		RxMngWorkItem;
+	RxManagementQueue	rxManeQueue;
+//PLICE_DEBUG<-
+//PLICE_DEBUG ->
+	pid_t				MLMEThr_pid;
+	struct 	completion	notify;
+	struct 	semaphore	mlme_semaphore;
+//PLICE_DEBUG <-
+
+
+    U32                         rx_bytes;
+
+    // Version control
+    BYTE                        byLocalID;
+    BYTE                        byRFType;
+
+    BYTE                        byMaxPwrLevel;
+    BYTE                        byZoneType;
+    BOOL                        bZoneRegExist;
+   BYTE                        byOriginalZonetype;
+    BYTE                        abyMacContext[MAC_MAX_CONTEXT_REG];
+    BOOL                        bLinkPass;          // link status: OK or fail
+    BYTE                        abyCurrentNetAddr[U_ETHER_ADDR_LEN];
+
+    // Adapter statistics
+    SStatCounter                scStatistic;
+    // 802.11 counter
+    SDot11Counters              s802_11Counter;
+
+
+    // 802.11 management
+    PSMgmtObject                pMgmt;
+    SMgmtObject                 sMgmtObj;
+
+    // 802.11 MAC specific
+    UINT                        uCurrRSSI;
+    BYTE                        byCurrSQ;
+
+    DWORD                       dwTxAntennaSel;
+    DWORD                       dwRxAntennaSel;
+    BYTE                        byAntennaCount;
+    BYTE                        byRxAntennaMode;
+    BYTE                        byTxAntennaMode;
+    BOOL                        bTxRxAntInv;
+
+    PBYTE                       pbyTmpBuff;
+    UINT                        uSIFS;    //Current SIFS
+    UINT                        uDIFS;    //Current DIFS
+    UINT                        uEIFS;    //Current EIFS
+    UINT                        uSlot;    //Current SlotTime
+    UINT                        uCwMin;   //Current CwMin
+    UINT                        uCwMax;   //CwMax is fixed on 1023.
+    // PHY parameter
+    BYTE                        bySIFS;
+    BYTE                        byDIFS;
+    BYTE                        byEIFS;
+    BYTE                        bySlot;
+    BYTE                        byCWMaxMin;
+    CARD_PHY_TYPE               eCurrentPHYType;
+
+
+    VIA_BB_TYPE                 byBBType; //0: 11A, 1:11B, 2:11G
+    VIA_PKT_TYPE                byPacketType; //0:11a,1:11b,2:11gb(only CCK in BasicRate),3:11ga(OFDM in Basic Rate)
+    WORD                        wBasicRate;
+    BYTE                        byACKRate;
+    BYTE                        byTopOFDMBasicRate;
+    BYTE                        byTopCCKBasicRate;
+
+    BYTE                        byMinChannel;
+    BYTE                        byMaxChannel;
+    UINT                        uConnectionRate;
+
+    BYTE                        byPreambleType;
+    BYTE                        byShortPreamble;
+
+    WORD                        wCurrentRate;
+    WORD                        wRTSThreshold;
+    WORD                        wFragmentationThreshold;
+    BYTE                        byShortRetryLimit;
+    BYTE                        byLongRetryLimit;
+    CARD_OP_MODE                eOPMode;
+    BYTE                        byOpMode;
+    BOOL                        bBSSIDFilter;
+    WORD                        wMaxTransmitMSDULifetime;
+    BYTE                        abyBSSID[U_ETHER_ADDR_LEN];
+    BYTE                        abyDesireBSSID[U_ETHER_ADDR_LEN];
+    WORD                        wCTSDuration;       // update while speed change
+    WORD                        wACKDuration;       // update while speed change
+    WORD                        wRTSTransmitLen;    // update while speed change
+    BYTE                        byRTSServiceField;  // update while speed change
+    BYTE                        byRTSSignalField;   // update while speed change
+
+    DWORD                       dwMaxReceiveLifetime;       // dot11MaxReceiveLifetime
+
+    BOOL                        bCCK;
+    BOOL                        bEncryptionEnable;
+    BOOL                        bLongHeader;
+    BOOL                        bShortSlotTime;
+    BOOL                        bProtectMode;
+    BOOL                        bNonERPPresent;
+    BOOL                        bBarkerPreambleMd;
+
+    BYTE                        byERPFlag;
+    WORD                        wUseProtectCntDown;
+
+    BOOL                    bRadioControlOff;
+    BOOL                    bRadioOff;
+    BOOL                    bEnablePSMode;
+    WORD                    wListenInterval;
+    BOOL                    bPWBitOn;
+    WMAC_POWER_MODE         ePSMode;
+
+
+    // GPIO Radio Control
+    BYTE                    byRadioCtl;
+    BYTE                    byGPIO;
+    BOOL                    bHWRadioOff;
+    BOOL                    bPrvActive4RadioOFF;
+    BOOL                    bGPIOBlockRead;
+
+    // Beacon releated
+    WORD                    wSeqCounter;
+    WORD                    wBCNBufLen;
+    BOOL                    bBeaconBufReady;
+    BOOL                    bBeaconSent;
+    BOOL                    bIsBeaconBufReadySet;
+    UINT                    cbBeaconBufReadySetCnt;
+    BOOL                    bFixRate;
+    BYTE                    byCurrentCh;
+    UINT                    uScanTime;
+
+    CMD_STATE               eCommandState;
+
+    CMD_CODE                eCommand;
+    BOOL                    bBeaconTx;
+
+    BOOL                    bStopBeacon;
+    BOOL                    bStopDataPkt;
+    BOOL                    bStopTx0Pkt;
+    UINT                    uAutoReConnectTime;
+
+    // 802.11 counter
+
+    CMD_ITEM                eCmdQueue[CMD_Q_SIZE];
+    UINT                    uCmdDequeueIdx;
+    UINT                    uCmdEnqueueIdx;
+    UINT                    cbFreeCmdQueue;
+    BOOL                    bCmdRunning;
+    BOOL                    bCmdClear;
+
+
+
+    BOOL                    bRoaming;
+    //WOW
+    BYTE                    abyIPAddr[4];
+
+    ULONG                   ulTxPower;
+    NDIS_802_11_WEP_STATUS  eEncryptionStatus;
+    BOOL                    bTransmitKey;
+//2007-0925-01<Add>by MikeLiu
+//mike add :save old Encryption
+    NDIS_802_11_WEP_STATUS  eOldEncryptionStatus;
+    SKeyManagement          sKey;
+    DWORD                   dwIVCounter;
+
+    QWORD                   qwPacketNumber; //For CCMP and TKIP as TSC(6 bytes)
+    UINT                    uCurrentWEPMode;
+
+    RC4Ext                  SBox;
+    BYTE                    abyPRNG[WLAN_WEPMAX_KEYLEN+3];
+
+    BYTE                    byKeyIndex;
+    UINT                    uKeyLength;
+    BYTE                    abyKey[WLAN_WEP232_KEYLEN];
+
+    BOOL                    bAES;
+    BYTE                    byCntMeasure;
+
+    // for AP mode
+    UINT                    uAssocCount;
+    BOOL                    bMoreData;
+
+    // QoS
+    BOOL                    bGrpAckPolicy;
+
+    // for OID_802_11_ASSOCIATION_INFORMATION
+    BOOL                    bAssocInfoSet;
+
+
+    BYTE                    byAutoFBCtrl;
+
+    BOOL                    bTxMICFail;
+    BOOL                    bRxMICFail;
+
+
+    UINT                    uRATEIdx;
+
+
+    // For Update BaseBand VGA Gain Offset
+    BOOL                    bUpdateBBVGA;
+    UINT                    uBBVGADiffCount;
+    BYTE                    byBBVGANew;
+    BYTE                    byBBVGACurrent;
+    BYTE                    abyBBVGA[BB_VGA_LEVEL];
+    LONG                    ldBmThreshold[BB_VGA_LEVEL];
+
+    BYTE                    byBBPreEDRSSI;
+    BYTE                    byBBPreEDIndex;
+
+    BOOL                    bRadioCmd;
+    DWORD                   dwDiagRefCount;
+
+    // For FOE Tuning
+    BYTE                    byFOETuning;
+
+    // For Auto Power Tunning
+
+    BYTE                    byAutoPwrTunning;
+    SHORT                   sPSetPointCCK;
+    SHORT                   sPSetPointOFDMG;
+    SHORT                   sPSetPointOFDMA;
+    LONG                    lPFormulaOffset;
+    SHORT                   sPThreshold;
+    CHAR                    cAdjustStep;
+    CHAR                    cMinTxAGC;
+
+    // For RF Power table
+    BYTE                    byCCKPwr;
+    BYTE                    byOFDMPwrG;
+    BYTE                    byCurPwr;
+    I8                      byCurPwrdBm;
+    BYTE                    abyCCKPwrTbl[CB_MAX_CHANNEL_24G+1];
+    BYTE                    abyOFDMPwrTbl[CB_MAX_CHANNEL+1];
+    I8                      abyCCKDefaultPwr[CB_MAX_CHANNEL_24G+1];
+    I8                      abyOFDMDefaultPwr[CB_MAX_CHANNEL+1];
+    I8                      abyRegPwr[CB_MAX_CHANNEL+1];
+    I8                      abyLocalPwr[CB_MAX_CHANNEL+1];
+
+
+    // BaseBand Loopback Use
+    BYTE                    byBBCR4d;
+    BYTE                    byBBCRc9;
+    BYTE                    byBBCR88;
+    BYTE                    byBBCR09;
+
+    // command timer
+    struct timer_list       sTimerCommand;
+#ifdef TxInSleep
+     struct timer_list       sTimerTxData;
+     ULONG                       nTxDataTimeCout;
+     BOOL  fTxDataInSleep;
+     BOOL  IsTxDataTrigger;
+#endif
+
+#ifdef WPA_SM_Transtatus
+    BOOL  fWPA_Authened;           //is WPA/WPA-PSK or WPA2/WPA2-PSK authen??
+#endif
+    BYTE            byReAssocCount;   //mike add:re-association retry times!
+    BYTE            byLinkWaitCount;
+
+
+    BYTE                    abyNodeName[17];
+
+    BOOL                    bDiversityRegCtlON;
+    BOOL                    bDiversityEnable;
+    ULONG                   ulDiversityNValue;
+    ULONG                   ulDiversityMValue;
+    BYTE                    byTMax;
+    BYTE                    byTMax2;
+    BYTE                    byTMax3;
+    ULONG                   ulSQ3TH;
+
+// ANT diversity
+    ULONG                   uDiversityCnt;
+    BYTE                    byAntennaState;
+    ULONG                   ulRatio_State0;
+    ULONG                   ulRatio_State1;
+
+    //SQ3 functions for antenna diversity
+    struct timer_list           TimerSQ3Tmax1;
+    struct timer_list           TimerSQ3Tmax2;
+    struct timer_list           TimerSQ3Tmax3;
+
+
+    ULONG                   uNumSQ3[MAX_RATE];
+    WORD                    wAntDiversityMaxRate;
+
+
+    SEthernetHeader         sTxEthHeader;
+    SEthernetHeader         sRxEthHeader;
+    BYTE                    abyBroadcastAddr[U_ETHER_ADDR_LEN];
+    BYTE                    abySNAP_RFC1042[U_ETHER_ADDR_LEN];
+    BYTE                    abySNAP_Bridgetunnel[U_ETHER_ADDR_LEN];
+     BYTE                        abyEEPROM[EEP_MAX_CONTEXT_SIZE];  //DWORD alignment
+    // Pre-Authentication & PMK cache
+    SPMKID                  gsPMKID;
+    SPMKIDCandidateEvent    gsPMKIDCandidate;
+
+
+    // for 802.11h
+    BOOL                    b11hEnable;
+    BYTE                    abyCountryCode[3];
+    // for 802.11h DFS
+    UINT                    uNumOfMeasureEIDs;
+    PWLAN_IE_MEASURE_REQ    pCurrMeasureEID;
+    BOOL                    bMeasureInProgress;
+    BYTE                    byOrgChannel;
+    BYTE                    byOrgRCR;
+    DWORD                   dwOrgMAR0;
+    DWORD                   dwOrgMAR4;
+    BYTE                    byBasicMap;
+    BYTE                    byCCAFraction;
+    BYTE                    abyRPIs[8];
+    DWORD                   dwRPIs[8];
+    BOOL                    bChannelSwitch;
+    BYTE                    byNewChannel;
+    BYTE                    byChannelSwitchCount;
+    BOOL                    bQuietEnable;
+    BOOL                    bEnableFirstQuiet;
+    BYTE                    byQuietStartCount;
+    UINT                    uQuietEnqueue;
+    DWORD                   dwCurrentQuietEndTime;
+    SQuietControl           sQuiet[MAX_QUIET_COUNT];
+    // for 802.11h TPC
+    BOOL                    bCountryInfo5G;
+    BOOL                    bCountryInfo24G;
+
+    WORD                    wBeaconInterval;
+
+    //WPA supplicant deamon
+	struct net_device       *wpadev;
+	BOOL                    bWPADEVUp;
+    struct sk_buff          *skb;
+#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+/*
+        BOOL                 bwextstep0;
+        BOOL                 bwextstep1;
+        BOOL                 bwextstep2;
+        BOOL                 bwextstep3;
+        */
+        UINT                   bwextcount;
+        BOOL                 bWPASuppWextEnabled;
+#endif
+
+    //--
+#ifdef HOSTAP
+    // user space daemon: hostapd, is used for HOSTAP
+	BOOL                    bEnableHostapd;
+	BOOL                    bEnable8021x;
+	BOOL                    bEnableHostWEP;
+	struct net_device       *apdev;
+	int (*tx_80211)(struct sk_buff *skb, struct net_device *dev);
+#endif
+    UINT                    uChannel;
+    BOOL                    bMACSuspend;
+
+#ifdef WIRELESS_EXT
+	struct iw_statistics	wstats;		// wireless stats
+#endif /* WIRELESS_EXT */
+    BOOL                    bCommit;
+
+} DEVICE_INFO, *PSDevice;
+
+
+//PLICE_DEBUG->
+
+
+ inline  static	VOID   EnQueue (PSDevice pDevice,PSRxMgmtPacket  pRxMgmtPacket)
+{
+	//printk("Enter EnQueue:tail is %d\n",pDevice->rxManeQueue.tail);
+	if ((pDevice->rxManeQueue.tail+1) % NUM == pDevice->rxManeQueue.head)
+	{
+		//printk("Queue is Full,tail is %d\n",pDevice->rxManeQueue.tail);
+		return ;
+	}
+	else
+	{
+		pDevice->rxManeQueue.tail = (pDevice->rxManeQueue.tail+1)% NUM;
+		pDevice->rxManeQueue.Q[pDevice->rxManeQueue.tail] = pRxMgmtPacket;
+		pDevice->rxManeQueue.packet_num++;
+		//printk("packet num is %d\n",pDevice->rxManeQueue.packet_num);
+	}
+}
+
+
+
+
+	inline  static  PSRxMgmtPacket DeQueue (PSDevice pDevice)
+{
+	PSRxMgmtPacket  pRxMgmtPacket;
+	if (pDevice->rxManeQueue.tail == pDevice->rxManeQueue.head)
+	{
+		printk("Queue is Empty\n");
+		return NULL;
+	}
+	else
+	{
+		int	x;
+		//x=pDevice->rxManeQueue.head = (pDevice->rxManeQueue.head+1)%NUM;
+		pDevice->rxManeQueue.head = (pDevice->rxManeQueue.head+1)%NUM;
+		x = pDevice->rxManeQueue.head;
+		//printk("Enter DeQueue:head is %d\n",x);
+		pRxMgmtPacket = pDevice->rxManeQueue.Q[x];
+		pDevice->rxManeQueue.packet_num--;
+		return pRxMgmtPacket;
+	}
+}
+
+VOID	InitRxManagementQueue(PSDevice   pDevice);
+
+
+
+//PLICE_DEBUG<-
+
+
+
+
+
+
+inline static BOOL device_get_ip(PSDevice pInfo) {
+    struct in_device* in_dev=(struct in_device*) pInfo->dev->ip_ptr;
+    struct in_ifaddr* ifa;
+
+    if (in_dev!=NULL) {
+        ifa=(struct in_ifaddr*) in_dev->ifa_list;
+        if (ifa!=NULL) {
+            memcpy(pInfo->abyIPAddr,&ifa->ifa_address,4);
+            return TRUE;
+        }
+    }
+    return FALSE;
+}
+
+
+
+static inline PDEVICE_RD_INFO alloc_rd_info(void) {
+    PDEVICE_RD_INFO  ptr;
+    if ((ptr = (PDEVICE_RD_INFO)kmalloc((int)sizeof(DEVICE_RD_INFO), (int)GFP_ATOMIC)) == NULL)
+        return NULL;
+    else {
+        memset(ptr,0,sizeof(DEVICE_RD_INFO));
+        return ptr;
+    }
+}
+
+static inline PDEVICE_TD_INFO alloc_td_info(void) {
+    PDEVICE_TD_INFO  ptr;
+    if ((ptr = (PDEVICE_TD_INFO)kmalloc((int)sizeof(DEVICE_TD_INFO), (int)GFP_ATOMIC))==NULL)
+        return NULL;
+    else {
+        memset(ptr,0,sizeof(DEVICE_TD_INFO));
+        return ptr;
+    }
+}
+
+/*---------------------  Export Functions  --------------------------*/
+
+BOOL device_dma0_xmit(PSDevice pDevice, struct sk_buff *skb, UINT uNodeIndex);
+BOOL device_alloc_frag_buf(PSDevice pDevice, PSDeFragControlBlock pDeF);
+int Config_FileOperation(PSDevice pDevice,BOOL fwrite,unsigned char *Parameter);
+#endif
+
+
diff --git a/drivers/staging/vt6655/device_cfg.h b/drivers/staging/vt6655/device_cfg.h
new file mode 100644
index 00000000000..1cbb4440b46
--- /dev/null
+++ b/drivers/staging/vt6655/device_cfg.h
@@ -0,0 +1,142 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: device_cfg.h
+ *
+ * Purpose: Driver configuration header
+ * Author: Lyndon Chen
+ *
+ * Date: Dec 17, 2002
+ *
+ */
+#ifndef __DEVICE_CONFIG_H
+#define __DEVICE_CONFIG_H
+
+//#include <linux/config.h>
+#include <linux/types.h>
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+
+
+
+typedef __u8    UINT8,   *PUINT8;
+typedef __u16   UINT16,  *PUINT16;
+typedef __u32   UINT32,  *PUINT32;
+
+
+#ifndef VOID
+#define VOID            void
+#endif
+
+#ifndef CONST
+#define CONST           const
+#endif
+
+#ifndef STATIC
+#define STATIC          static
+#endif
+
+#ifndef DEF
+#define DEF
+#endif
+
+#ifndef IN
+#define IN
+#endif
+
+#ifndef OUT
+#define OUT
+#endif
+
+typedef
+struct _version {
+    UINT8   major;
+    UINT8   minor;
+    UINT8   build;
+} version_t, *pversion_t;
+
+#ifndef FALSE
+#define FALSE   (0)
+#endif
+
+#ifndef TRUE
+#define TRUE    (!(FALSE))
+#endif
+
+#define VID_TABLE_SIZE      64
+#define MCAST_TABLE_SIZE    64
+#define MCAM_SIZE           32
+#define VCAM_SIZE           32
+#define TX_QUEUE_NO         8
+
+#define DEVICE_NAME         "vt6655"
+#define DEVICE_FULL_DRV_NAM "VIA Networking Solomon-A/B/G Wireless LAN Adapter Driver"
+
+#ifndef MAJOR_VERSION
+#define MAJOR_VERSION       1
+#endif
+
+#ifndef MINOR_VERSION
+#define MINOR_VERSION       17
+#endif
+
+#ifndef DEVICE_VERSION
+#define DEVICE_VERSION       "1.19.12"
+#endif
+//config file
+#include <linux/fs.h>
+#include <linux/fcntl.h>
+#ifndef CONFIG_PATH
+#define CONFIG_PATH            "/etc/vntconfiguration.dat"
+#endif
+
+//Max: 2378=2312Payload + 30HD +4CRC + 2Padding + 4Len + 8TSF + 4RSR
+#define PKT_BUF_SZ          2390
+
+
+#define MALLOC(x,y)         kmalloc((x),(y))
+#define FREE(x)             kfree((x))
+#define MAX_UINTS           8
+#define OPTION_DEFAULT      { [0 ... MAX_UINTS-1] = -1}
+
+
+
+typedef enum  _chip_type{
+    VT3253=1
+} CHIP_TYPE, *PCHIP_TYPE;
+
+
+
+#ifdef VIAWET_DEBUG
+#define ASSERT(x) { \
+    if (!(x)) { \
+        printk(KERN_ERR "assertion %s failed: file %s line %d\n", #x,\
+        __FUNCTION__, __LINE__);\
+        *(int*) 0=0;\
+    }\
+}
+#define DBG_PORT80(value)                   outb(value, 0x80)
+#else
+#define ASSERT(x)
+#define DBG_PORT80(value)
+#endif
+
+
+#endif
diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c
new file mode 100644
index 00000000000..a10ed27acbc
--- /dev/null
+++ b/drivers/staging/vt6655/device_main.c
@@ -0,0 +1,4074 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: device_main.c
+ *
+ * Purpose: driver entry for initial, open, close, tx and rx.
+ *
+ * Author: Lyndon Chen
+ *
+ * Date: Jan 8, 2003
+ *
+ * Functions:
+ *
+ *   device_found1 - module initial (insmod) driver entry
+ *   device_remove1 - module remove entry
+ *   device_init_info - device structure resource allocation function
+ *   device_free_info - device structure resource free function
+ *   device_get_pci_info - get allocated pci io/mem resource
+ *   device_print_info - print out resource
+ *   device_open - allocate dma/descripter resource & initial mac/bbp function
+ *   device_xmit - asynchrous data tx function
+ *   device_intr - interrupt handle function
+ *   device_set_multi - set mac filter
+ *   device_ioctl - ioctl entry
+ *   device_close - shutdown mac/bbp & free dma/descripter resource
+ *   device_rx_srv - rx service function
+ *   device_receive_frame - rx data function
+ *   device_alloc_rx_buf - rx buffer pre-allocated function
+ *   device_alloc_frag_buf - rx fragement pre-allocated function
+ *   device_free_tx_buf - free tx buffer function
+ *   device_free_frag_buf- free de-fragement buffer
+ *   device_dma0_tx_80211- tx 802.11 frame via dma0
+ *   device_dma0_xmit- tx PS bufferred frame via dma0
+ *   device_init_rd0_ring- initial rd dma0 ring
+ *   device_init_rd1_ring- initial rd dma1 ring
+ *   device_init_td0_ring- initial tx dma0 ring buffer
+ *   device_init_td1_ring- initial tx dma1 ring buffer
+ *   device_init_registers- initial MAC & BBP & RF internal registers.
+ *   device_init_rings- initial tx/rx ring buffer
+ *   device_init_defrag_cb- initial & allocate de-fragement buffer.
+ *   device_free_rings- free all allocated ring buffer
+ *   device_tx_srv- tx interrupt service function
+ *
+ * Revision History:
+ */
+#undef __NO_VERSION__
+
+#if !defined(__DEVICE_H__)
+#include "device.h"
+#endif
+#if !defined(__CARD_H__)
+#include "card.h"
+#endif
+#if !defined(__TBIT_H__)
+#include "tbit.h"
+#endif
+#if !defined(__BASEBAND_H__)
+#include "baseband.h"
+#endif
+#if !defined(__MAC_H__)
+#include "mac.h"
+#endif
+#if !defined(__TETHER_H__)
+#include "tether.h"
+#endif
+#if !defined(__WMGR_H__)
+#include "wmgr.h"
+#endif
+#if !defined(__WCTL_H__)
+#include "wctl.h"
+#endif
+#if !defined(__POWER_H__)
+#include "power.h"
+#endif
+#if !defined(__WCMD_H__)
+#include "wcmd.h"
+#endif
+#if !defined(__IOCMD_H__)
+#include "iocmd.h"
+#endif
+#if !defined(__TCRC_H__)
+#include "tcrc.h"
+#endif
+#if !defined(__RXTX_H__)
+#include "rxtx.h"
+#endif
+#if !defined(__WROUTE_H__)
+#include "wroute.h"
+#endif
+#if !defined(__BSSDB_H__)
+#include "bssdb.h"
+#endif
+#if !defined(__HOSTAP_H__)
+#include "hostap.h"
+#endif
+#if !defined(__WPACTL_H__)
+#include "wpactl.h"
+#endif
+#if !defined(__IOCTL_H__)
+#include "ioctl.h"
+#endif
+#if !defined(__IWCTL_H__)
+#include "iwctl.h"
+#endif
+#if !defined(__DPC_H__)
+#include "dpc.h"
+#endif
+#if !defined(__DATARATE_H__)
+#include "datarate.h"
+#endif
+#if !defined(__RF_H__)
+#include "rf.h"
+#endif
+#if !defined(__IOWPA_H__)
+#include "iowpa.h"
+#endif
+
+#include <linux/delay.h>
+#include <linux/kthread.h>
+// #ifdef PRIVATE_OBJ
+//#if !defined(__DEVICE_EXP_H)
+//#include "device_exp.h"
+//#endif
+//#if !defined(__DEVICE_MODULE_H)
+//#include "device_module.h"
+//#endif
+
+
+// #endif
+//#define	DEBUG
+/*---------------------  Static Definitions -------------------------*/
+//static int          msglevel                =MSG_LEVEL_DEBUG;
+static int          msglevel                =   MSG_LEVEL_INFO;
+
+//#define	PLICE_DEBUG
+//
+// Define module options
+//
+#ifndef PRIVATE_OBJ
+MODULE_AUTHOR("VIA Networking Technologies, Inc., <lyndonchen@vntek.com.tw>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("VIA Networking Solomon-A/B/G Wireless LAN Adapter Driver");
+#endif
+
+//PLICE_DEBUG ->
+	static int mlme_kill;
+	//static  struct task_struct * mlme_task;
+//PLICE_DEBUG <-
+
+#define DEVICE_PARAM(N,D)
+/*
+        static const int N[MAX_UINTS]=OPTION_DEFAULT;\
+        MODULE_PARM(N, "1-" __MODULE_STRING(MAX_UINTS) "i");\
+        MODULE_PARM_DESC(N, D);
+*/
+
+#define RX_DESC_MIN0     16
+#define RX_DESC_MAX0     128
+#define RX_DESC_DEF0     32
+DEVICE_PARAM(RxDescriptors0,"Number of receive descriptors0");
+
+#define RX_DESC_MIN1     16
+#define RX_DESC_MAX1     128
+#define RX_DESC_DEF1     32
+DEVICE_PARAM(RxDescriptors1,"Number of receive descriptors1");
+
+#define TX_DESC_MIN0     16
+#define TX_DESC_MAX0     128
+#define TX_DESC_DEF0     32
+DEVICE_PARAM(TxDescriptors0,"Number of transmit descriptors0");
+
+#define TX_DESC_MIN1     16
+#define TX_DESC_MAX1     128
+#define TX_DESC_DEF1     64
+DEVICE_PARAM(TxDescriptors1,"Number of transmit descriptors1");
+
+
+#define IP_ALIG_DEF     0
+/* IP_byte_align[] is used for IP header DWORD byte aligned
+   0: indicate the IP header won't be DWORD byte aligned.(Default) .
+   1: indicate the IP header will be DWORD byte aligned.
+      In some enviroment, the IP header should be DWORD byte aligned,
+      or the packet will be droped when we receive it. (eg: IPVS)
+*/
+DEVICE_PARAM(IP_byte_align,"Enable IP header dword aligned");
+
+
+#define INT_WORKS_DEF   20
+#define INT_WORKS_MIN   10
+#define INT_WORKS_MAX   64
+
+DEVICE_PARAM(int_works,"Number of packets per interrupt services");
+
+#define CHANNEL_MIN     1
+#define CHANNEL_MAX     14
+#define CHANNEL_DEF     6
+
+DEVICE_PARAM(Channel, "Channel number");
+
+
+/* PreambleType[] is the preamble length used for transmit.
+   0: indicate allows long preamble type
+   1: indicate allows short preamble type
+*/
+
+#define PREAMBLE_TYPE_DEF     1
+
+DEVICE_PARAM(PreambleType, "Preamble Type");
+
+
+#define RTS_THRESH_MIN     512
+#define RTS_THRESH_MAX     2347
+#define RTS_THRESH_DEF     2347
+
+DEVICE_PARAM(RTSThreshold, "RTS threshold");
+
+
+#define FRAG_THRESH_MIN     256
+#define FRAG_THRESH_MAX     2346
+#define FRAG_THRESH_DEF     2346
+
+DEVICE_PARAM(FragThreshold, "Fragmentation threshold");
+
+
+#define DATA_RATE_MIN     0
+#define DATA_RATE_MAX     13
+#define DATA_RATE_DEF     13
+/* datarate[] index
+   0: indicate 1 Mbps   0x02
+   1: indicate 2 Mbps   0x04
+   2: indicate 5.5 Mbps 0x0B
+   3: indicate 11 Mbps  0x16
+   4: indicate 6 Mbps   0x0c
+   5: indicate 9 Mbps   0x12
+   6: indicate 12 Mbps  0x18
+   7: indicate 18 Mbps  0x24
+   8: indicate 24 Mbps  0x30
+   9: indicate 36 Mbps  0x48
+  10: indicate 48 Mbps  0x60
+  11: indicate 54 Mbps  0x6c
+  12: indicate 72 Mbps  0x90
+  13: indicate auto rate
+*/
+
+DEVICE_PARAM(ConnectionRate, "Connection data rate");
+
+#define OP_MODE_DEF     0
+
+DEVICE_PARAM(OPMode, "Infrastruct, adhoc, AP mode ");
+
+/* OpMode[] is used for transmit.
+   0: indicate infrastruct mode used
+   1: indicate adhoc mode used
+   2: indicate AP mode used
+*/
+
+
+/* PSMode[]
+   0: indicate disable power saving mode
+   1: indicate enable power saving mode
+*/
+
+#define PS_MODE_DEF     0
+
+DEVICE_PARAM(PSMode, "Power saving mode");
+
+
+#define SHORT_RETRY_MIN     0
+#define SHORT_RETRY_MAX     31
+#define SHORT_RETRY_DEF     8
+
+
+DEVICE_PARAM(ShortRetryLimit, "Short frame retry limits");
+
+#define LONG_RETRY_MIN     0
+#define LONG_RETRY_MAX     15
+#define LONG_RETRY_DEF     4
+
+
+DEVICE_PARAM(LongRetryLimit, "long frame retry limits");
+
+
+/* BasebandType[] baseband type selected
+   0: indicate 802.11a type
+   1: indicate 802.11b type
+   2: indicate 802.11g type
+*/
+#define BBP_TYPE_MIN     0
+#define BBP_TYPE_MAX     2
+#define BBP_TYPE_DEF     2
+
+DEVICE_PARAM(BasebandType, "baseband type");
+
+
+
+/* 80211hEnable[]
+   0: indicate disable 802.11h
+   1: indicate enable 802.11h
+*/
+
+#define X80211h_MODE_DEF     0
+
+DEVICE_PARAM(b80211hEnable, "802.11h mode");
+
+/* 80211hEnable[]
+   0: indicate disable 802.11h
+   1: indicate enable 802.11h
+*/
+
+#define DIVERSITY_ANT_DEF     0
+
+DEVICE_PARAM(bDiversityANTEnable, "ANT diversity mode");
+
+
+//
+// Static vars definitions
+//
+
+
+#ifndef PRIVATE_OBJ
+static int          device_nics             =0;
+static PSDevice     pDevice_Infos           =NULL;
+static struct net_device *root_device_dev = NULL;
+
+static CHIP_INFO chip_info_table[]= {
+    { VT3253,       "VIA Networking Solomon-A/B/G Wireless LAN Adapter ",
+        256, 1,     DEVICE_FLAGS_IP_ALIGN|DEVICE_FLAGS_TX_ALIGN },
+    {0,NULL}
+};
+
+static struct pci_device_id device_id_table[] __devinitdata = {
+{ 0x1106, 0x3253, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (int)&chip_info_table[0]},
+{ 0, }
+};
+#endif
+
+/*---------------------  Static Functions  --------------------------*/
+
+#ifndef PRIVATE_OBJ
+
+static int  device_found1(struct pci_dev *pcid, const struct pci_device_id *ent);
+static BOOL device_init_info(struct pci_dev* pcid, PSDevice* ppDevice, PCHIP_INFO);
+static void device_free_info(PSDevice pDevice);
+static BOOL device_get_pci_info(PSDevice, struct pci_dev* pcid);
+static void device_print_info(PSDevice pDevice);
+static struct net_device_stats *device_get_stats(struct net_device *dev);
+static void device_init_diversity_timer(PSDevice pDevice);
+static int  device_open(struct net_device *dev);
+static int  device_xmit(struct sk_buff *skb, struct net_device *dev);
+static  irqreturn_t  device_intr(int irq,  void*dev_instance);
+static void device_set_multi(struct net_device *dev);
+static int  device_close(struct net_device *dev);
+static int  device_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+
+#ifdef CONFIG_PM
+static int device_notify_reboot(struct notifier_block *, unsigned long event, void *ptr);
+static int viawget_suspend(struct pci_dev *pcid, u32 state);
+static int viawget_resume(struct pci_dev *pcid);
+struct notifier_block device_notifier = {
+        notifier_call:  device_notify_reboot,
+        next:           NULL,
+        priority:       0
+};
+#endif
+
+#endif // #ifndef PRIVATE_OBJ
+
+static void device_init_rd0_ring(PSDevice pDevice);
+static void device_init_rd1_ring(PSDevice pDevice);
+static void device_init_defrag_cb(PSDevice pDevice);
+static void device_init_td0_ring(PSDevice pDevice);
+static void device_init_td1_ring(PSDevice pDevice);
+
+#ifndef PRIVATE_OBJ
+static int  device_dma0_tx_80211(struct sk_buff *skb, struct net_device *dev);
+#endif
+//2008-0714<Add>by Mike Liu
+static BOOL device_release_WPADEV(PSDevice pDevice);
+
+static int  ethtool_ioctl(struct net_device *dev, void *useraddr);
+static int  device_rx_srv(PSDevice pDevice, UINT uIdx);
+static int  device_tx_srv(PSDevice pDevice, UINT uIdx);
+static BOOL device_alloc_rx_buf(PSDevice pDevice, PSRxDesc pDesc);
+static void device_init_registers(PSDevice pDevice, DEVICE_INIT_TYPE InitType);
+static void device_free_tx_buf(PSDevice pDevice, PSTxDesc pDesc);
+static void device_free_td0_ring(PSDevice pDevice);
+static void device_free_td1_ring(PSDevice pDevice);
+static void device_free_rd0_ring(PSDevice pDevice);
+static void device_free_rd1_ring(PSDevice pDevice);
+static void device_free_rings(PSDevice pDevice);
+static void device_free_frag_buf(PSDevice pDevice);
+static int Config_FileGetParameter(UCHAR *string, UCHAR *dest,UCHAR *source);
+
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+
+
+#ifndef PRIVATE_OBJ
+
+static char* get_chip_name(int chip_id) {
+    int i;
+    for (i=0;chip_info_table[i].name!=NULL;i++)
+        if (chip_info_table[i].chip_id==chip_id)
+            break;
+    return chip_info_table[i].name;
+}
+
+static void __devexit device_remove1(struct pci_dev *pcid)
+{
+    PSDevice pDevice=pci_get_drvdata(pcid);
+
+    if (pDevice==NULL)
+        return;
+    device_free_info(pDevice);
+
+}
+
+#endif
+/*
+static void
+device_set_int_opt(int *opt, int val, int min, int max, int def,char* name,char* devname) {
+    if (val==-1)
+        *opt=def;
+    else if (val<min || val>max) {
+        DEVICE_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: the value of parameter %s is invalid, the valid range is (%d-%d)\n" ,
+            devname,name, min,max);
+        *opt=def;
+    } else {
+        DEVICE_PRT(MSG_LEVEL_INFO, KERN_INFO "%s: set value of parameter %s to %d\n",
+            devname, name, val);
+        *opt=val;
+    }
+}
+
+static void
+device_set_bool_opt(PU32 opt, int val,BOOL def,U32 flag, char* name,char* devname) {
+    (*opt)&=(~flag);
+    if (val==-1)
+        *opt|=(def ? flag : 0);
+    else if (val<0 || val>1) {
+        DEVICE_PRT(MSG_LEVEL_INFO, KERN_NOTICE
+            "%s: the value of parameter %s is invalid, the valid range is (0-1)\n",devname,name);
+        *opt|=(def ? flag : 0);
+    } else {
+        DEVICE_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: set parameter %s to %s\n",
+            devname,name , val ? "TRUE" : "FALSE");
+        *opt|=(val ? flag : 0);
+    }
+}
+*/
+static void
+device_get_options(PSDevice pDevice, int index, char* devname) {
+
+    POPTIONS pOpts = &(pDevice->sOpts);
+  pOpts->nRxDescs0=RX_DESC_DEF0;
+  pOpts->nRxDescs1=RX_DESC_DEF1;
+  pOpts->nTxDescs[0]=TX_DESC_DEF0;
+  pOpts->nTxDescs[1]=TX_DESC_DEF1;
+pOpts->flags|=DEVICE_FLAGS_IP_ALIGN;
+  pOpts->int_works=INT_WORKS_DEF;
+  pOpts->rts_thresh=RTS_THRESH_DEF;
+  pOpts->frag_thresh=FRAG_THRESH_DEF;
+  pOpts->data_rate=DATA_RATE_DEF;
+  pOpts->channel_num=CHANNEL_DEF;
+
+pOpts->flags|=DEVICE_FLAGS_PREAMBLE_TYPE;
+pOpts->flags|=DEVICE_FLAGS_OP_MODE;
+//pOpts->flags|=DEVICE_FLAGS_PS_MODE;
+  pOpts->short_retry=SHORT_RETRY_DEF;
+  pOpts->long_retry=LONG_RETRY_DEF;
+  pOpts->bbp_type=BBP_TYPE_DEF;
+pOpts->flags|=DEVICE_FLAGS_80211h_MODE;
+pOpts->flags|=DEVICE_FLAGS_DiversityANT;
+
+
+}
+
+static void
+device_set_options(PSDevice pDevice) {
+
+    BYTE    abyBroadcastAddr[U_ETHER_ADDR_LEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+    BYTE    abySNAP_RFC1042[U_ETHER_ADDR_LEN] = {0xAA, 0xAA, 0x03, 0x00, 0x00, 0x00};
+    BYTE    abySNAP_Bridgetunnel[U_ETHER_ADDR_LEN] = {0xAA, 0xAA, 0x03, 0x00, 0x00, 0xF8};
+
+
+    memcpy(pDevice->abyBroadcastAddr, abyBroadcastAddr, U_ETHER_ADDR_LEN);
+    memcpy(pDevice->abySNAP_RFC1042, abySNAP_RFC1042, U_ETHER_ADDR_LEN);
+    memcpy(pDevice->abySNAP_Bridgetunnel, abySNAP_Bridgetunnel, U_ETHER_ADDR_LEN);
+
+    pDevice->uChannel = pDevice->sOpts.channel_num;
+    pDevice->wRTSThreshold = pDevice->sOpts.rts_thresh;
+    pDevice->wFragmentationThreshold = pDevice->sOpts.frag_thresh;
+    pDevice->byShortRetryLimit = pDevice->sOpts.short_retry;
+    pDevice->byLongRetryLimit = pDevice->sOpts.long_retry;
+    pDevice->wMaxTransmitMSDULifetime = DEFAULT_MSDU_LIFETIME;
+    pDevice->byShortPreamble = (pDevice->sOpts.flags & DEVICE_FLAGS_PREAMBLE_TYPE) ? 1 : 0;
+    pDevice->byOpMode = (pDevice->sOpts.flags & DEVICE_FLAGS_OP_MODE) ? 1 : 0;
+    pDevice->ePSMode = (pDevice->sOpts.flags & DEVICE_FLAGS_PS_MODE) ? 1 : 0;
+    pDevice->b11hEnable = (pDevice->sOpts.flags & DEVICE_FLAGS_80211h_MODE) ? 1 : 0;
+    pDevice->bDiversityRegCtlON = (pDevice->sOpts.flags & DEVICE_FLAGS_DiversityANT) ? 1 : 0;
+    pDevice->uConnectionRate = pDevice->sOpts.data_rate;
+    if (pDevice->uConnectionRate < RATE_AUTO) pDevice->bFixRate = TRUE;
+    pDevice->byBBType = pDevice->sOpts.bbp_type;
+    pDevice->byPacketType = pDevice->byBBType;
+
+//PLICE_DEBUG->
+	pDevice->byAutoFBCtrl = AUTO_FB_0;
+	//pDevice->byAutoFBCtrl = AUTO_FB_1;
+//PLICE_DEBUG<-
+pDevice->bUpdateBBVGA = TRUE;
+    pDevice->byFOETuning = 0;
+    pDevice->wCTSDuration = 0;
+    pDevice->byPreambleType = 0;
+
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" uChannel= %d\n",(INT)pDevice->uChannel);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" byOpMode= %d\n",(INT)pDevice->byOpMode);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" ePSMode= %d\n",(INT)pDevice->ePSMode);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" wRTSThreshold= %d\n",(INT)pDevice->wRTSThreshold);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" byShortRetryLimit= %d\n",(INT)pDevice->byShortRetryLimit);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" byLongRetryLimit= %d\n",(INT)pDevice->byLongRetryLimit);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" byPreambleType= %d\n",(INT)pDevice->byPreambleType);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" byShortPreamble= %d\n",(INT)pDevice->byShortPreamble);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" uConnectionRate= %d\n",(INT)pDevice->uConnectionRate);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" byBBType= %d\n",(INT)pDevice->byBBType);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" pDevice->b11hEnable= %d\n",(INT)pDevice->b11hEnable);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" pDevice->bDiversityRegCtlON= %d\n",(INT)pDevice->bDiversityRegCtlON);
+}
+
+static VOID s_vCompleteCurrentMeasure (IN PSDevice pDevice, IN BYTE byResult)
+{
+    UINT    ii;
+    DWORD   dwDuration = 0;
+    BYTE    byRPI0 = 0;
+
+    for(ii=1;ii<8;ii++) {
+        pDevice->dwRPIs[ii] *= 255;
+        dwDuration |= *((PWORD) (pDevice->pCurrMeasureEID->sReq.abyDuration));
+        dwDuration <<= 10;
+        pDevice->dwRPIs[ii] /= dwDuration;
+        pDevice->abyRPIs[ii] = (BYTE) pDevice->dwRPIs[ii];
+        byRPI0 += pDevice->abyRPIs[ii];
+    }
+    pDevice->abyRPIs[0] = (0xFF - byRPI0);
+
+     if (pDevice->uNumOfMeasureEIDs == 0) {
+        VNTWIFIbMeasureReport(  pDevice->pMgmt,
+                                TRUE,
+                                pDevice->pCurrMeasureEID,
+                                byResult,
+                                pDevice->byBasicMap,
+                                pDevice->byCCAFraction,
+                                pDevice->abyRPIs
+                                );
+    } else {
+        VNTWIFIbMeasureReport(  pDevice->pMgmt,
+                                FALSE,
+                                pDevice->pCurrMeasureEID,
+                                byResult,
+                                pDevice->byBasicMap,
+                                pDevice->byCCAFraction,
+                                pDevice->abyRPIs
+                                );
+        CARDbStartMeasure (pDevice, pDevice->pCurrMeasureEID++, pDevice->uNumOfMeasureEIDs);
+    }
+
+}
+
+
+
+//
+// Initialiation of MAC & BBP registers
+//
+
+static void device_init_registers(PSDevice pDevice, DEVICE_INIT_TYPE InitType)
+{
+    UINT    ii;
+    BYTE    byValue;
+	BYTE    byValue1;
+    BYTE    byCCKPwrdBm = 0;
+    BYTE    byOFDMPwrdBm = 0;
+    INT zonetype=0;
+     PSMgmtObject    pMgmt = &(pDevice->sMgmtObj);
+    MACbShutdown(pDevice->PortOffset);
+    BBvSoftwareReset(pDevice->PortOffset);
+
+    if ((InitType == DEVICE_INIT_COLD) ||
+        (InitType == DEVICE_INIT_DXPL)) {
+        // Do MACbSoftwareReset in MACvInitialize
+        MACbSoftwareReset(pDevice->PortOffset);
+        // force CCK
+        pDevice->bCCK = TRUE;
+        pDevice->bAES = FALSE;
+        pDevice->bProtectMode = FALSE;      //Only used in 11g type, sync with ERP IE
+        pDevice->bNonERPPresent = FALSE;
+        pDevice->bBarkerPreambleMd = FALSE;
+        pDevice->wCurrentRate = RATE_1M;
+        pDevice->byTopOFDMBasicRate = RATE_24M;
+        pDevice->byTopCCKBasicRate = RATE_1M;
+
+        pDevice->byRevId = 0;                   //Target to IF pin while programming to RF chip.
+
+        // init MAC
+        MACvInitialize(pDevice->PortOffset);
+
+        // Get Local ID
+        VNSvInPortB(pDevice->PortOffset + MAC_REG_LOCALID, &(pDevice->byLocalID));
+
+           spin_lock_irq(&pDevice->lock);
+	 SROMvReadAllContents(pDevice->PortOffset,pDevice->abyEEPROM);
+
+           spin_unlock_irq(&pDevice->lock);
+
+        // Get Channel range
+
+        pDevice->byMinChannel = 1;
+        pDevice->byMaxChannel = CB_MAX_CHANNEL;
+
+        // Get Antena
+        byValue = SROMbyReadEmbedded(pDevice->PortOffset, EEP_OFS_ANTENNA);
+        if (byValue & EEP_ANTINV)
+            pDevice->bTxRxAntInv = TRUE;
+        else
+            pDevice->bTxRxAntInv = FALSE;
+#ifdef	PLICE_DEBUG
+	//printk("init_register:TxRxAntInv is %d,byValue is %d\n",pDevice->bTxRxAntInv,byValue);
+#endif
+
+        byValue &= (EEP_ANTENNA_AUX | EEP_ANTENNA_MAIN);
+        if (byValue == 0) // if not set default is All
+            byValue = (EEP_ANTENNA_AUX | EEP_ANTENNA_MAIN);
+#ifdef	PLICE_DEBUG
+	//printk("init_register:byValue is %d\n",byValue);
+#endif
+        pDevice->ulDiversityNValue = 100*260;//100*SROMbyReadEmbedded(pDevice->PortOffset, 0x51);
+        pDevice->ulDiversityMValue = 100*16;//SROMbyReadEmbedded(pDevice->PortOffset, 0x52);
+        pDevice->byTMax = 1;//SROMbyReadEmbedded(pDevice->PortOffset, 0x53);
+        pDevice->byTMax2 = 4;//SROMbyReadEmbedded(pDevice->PortOffset, 0x54);
+        pDevice->ulSQ3TH = 0;//(ULONG) SROMbyReadEmbedded(pDevice->PortOffset, 0x55);
+        pDevice->byTMax3 = 64;//SROMbyReadEmbedded(pDevice->PortOffset, 0x56);
+
+        if (byValue == (EEP_ANTENNA_AUX | EEP_ANTENNA_MAIN)) {
+            pDevice->byAntennaCount = 2;
+            pDevice->byTxAntennaMode = ANT_B;
+            pDevice->dwTxAntennaSel = 1;
+            pDevice->dwRxAntennaSel = 1;
+            if (pDevice->bTxRxAntInv == TRUE)
+                pDevice->byRxAntennaMode = ANT_A;
+            else
+                pDevice->byRxAntennaMode = ANT_B;
+                // chester for antenna
+byValue1 = SROMbyReadEmbedded(pDevice->PortOffset, EEP_OFS_ANTENNA);
+          //  if (pDevice->bDiversityRegCtlON)
+          if((byValue1&0x08)==0)
+                pDevice->bDiversityEnable = FALSE;//SROMbyReadEmbedded(pDevice->PortOffset, 0x50);
+            else
+                pDevice->bDiversityEnable = TRUE;
+#ifdef	PLICE_DEBUG
+		//printk("aux |main antenna: RxAntennaMode is %d\n",pDevice->byRxAntennaMode);
+#endif
+	} else  {
+            pDevice->bDiversityEnable = FALSE;
+            pDevice->byAntennaCount = 1;
+            pDevice->dwTxAntennaSel = 0;
+            pDevice->dwRxAntennaSel = 0;
+            if (byValue & EEP_ANTENNA_AUX) {
+                pDevice->byTxAntennaMode = ANT_A;
+                if (pDevice->bTxRxAntInv == TRUE)
+                    pDevice->byRxAntennaMode = ANT_B;
+                else
+                    pDevice->byRxAntennaMode = ANT_A;
+            } else {
+                pDevice->byTxAntennaMode = ANT_B;
+                if (pDevice->bTxRxAntInv == TRUE)
+                    pDevice->byRxAntennaMode = ANT_A;
+                else
+                    pDevice->byRxAntennaMode = ANT_B;
+            }
+        }
+#ifdef	PLICE_DEBUG
+	//printk("init registers: TxAntennaMode is %d\n",pDevice->byTxAntennaMode);
+#endif
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "bDiversityEnable=[%d],NValue=[%d],MValue=[%d],TMax=[%d],TMax2=[%d]\n",
+            pDevice->bDiversityEnable,(int)pDevice->ulDiversityNValue,(int)pDevice->ulDiversityMValue,pDevice->byTMax,pDevice->byTMax2);
+
+//#ifdef ZoneType_DefaultSetting
+//2008-8-4 <add> by chester
+//zonetype initial
+ pDevice->byOriginalZonetype = pDevice->abyEEPROM[EEP_OFS_ZONETYPE];
+ if((zonetype=Config_FileOperation(pDevice,FALSE,NULL)) >= 0) {         //read zonetype file ok!
+  if ((zonetype == 0)&&
+        (pDevice->abyEEPROM[EEP_OFS_ZONETYPE] !=0x00)){          //for USA
+    pDevice->abyEEPROM[EEP_OFS_ZONETYPE] = 0;
+    pDevice->abyEEPROM[EEP_OFS_MAXCHANNEL] = 0x0B;
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Init Zone Type :USA\n");
+  }
+ else if((zonetype == 1)&&
+ 	     (pDevice->abyEEPROM[EEP_OFS_ZONETYPE]!=0x01)){   //for Japan
+    pDevice->abyEEPROM[EEP_OFS_ZONETYPE] = 0x01;
+    pDevice->abyEEPROM[EEP_OFS_MAXCHANNEL] = 0x0D;
+  }
+ else if((zonetype == 2)&&
+ 	     (pDevice->abyEEPROM[EEP_OFS_ZONETYPE]!=0x02)){   //for Europe
+    pDevice->abyEEPROM[EEP_OFS_ZONETYPE] = 0x02;
+    pDevice->abyEEPROM[EEP_OFS_MAXCHANNEL] = 0x0D;
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Init Zone Type :Europe\n");
+  }
+
+else
+{
+   if(zonetype!=pDevice->abyEEPROM[EEP_OFS_ZONETYPE])
+      printk("zonetype in file[%02x] mismatch with in EEPROM[%02x]\n",zonetype,pDevice->abyEEPROM[EEP_OFS_ZONETYPE]);
+   else
+      printk("Read Zonetype file sucess,use default zonetype setting[%02x]\n",zonetype);
+ }
+ 	}
+  else
+    printk("Read Zonetype file fail,use default zonetype setting[%02x]\n",SROMbyReadEmbedded(pDevice->PortOffset, EEP_OFS_ZONETYPE));
+
+        // Get RFType
+        pDevice->byRFType = SROMbyReadEmbedded(pDevice->PortOffset, EEP_OFS_RFTYPE);
+
+        if ((pDevice->byRFType & RF_EMU) != 0) {
+            // force change RevID for VT3253 emu
+            pDevice->byRevId = 0x80;
+        }
+
+        pDevice->byRFType &= RF_MASK;
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "pDevice->byRFType = %x\n", pDevice->byRFType);
+
+        if (pDevice->bZoneRegExist == FALSE) {
+            pDevice->byZoneType = pDevice->abyEEPROM[EEP_OFS_ZONETYPE];
+        }
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "pDevice->byZoneType = %x\n", pDevice->byZoneType);
+
+        //Init RF module
+        RFbInit(pDevice);
+
+        //Get Desire Power Value
+        pDevice->byCurPwr = 0xFF;
+        pDevice->byCCKPwr = SROMbyReadEmbedded(pDevice->PortOffset, EEP_OFS_PWR_CCK);
+        pDevice->byOFDMPwrG = SROMbyReadEmbedded(pDevice->PortOffset, EEP_OFS_PWR_OFDMG);
+        //byCCKPwrdBm = SROMbyReadEmbedded(pDevice->PortOffset, EEP_OFS_CCK_PWR_dBm);
+
+	//byOFDMPwrdBm = SROMbyReadEmbedded(pDevice->PortOffset, EEP_OFS_OFDM_PWR_dBm);
+//printk("CCKPwrdBm is 0x%x,byOFDMPwrdBm is 0x%x\n",byCCKPwrdBm,byOFDMPwrdBm);
+		// Load power Table
+
+
+        for (ii=0;ii<CB_MAX_CHANNEL_24G;ii++) {
+            pDevice->abyCCKPwrTbl[ii+1] = SROMbyReadEmbedded(pDevice->PortOffset, (BYTE)(ii + EEP_OFS_CCK_PWR_TBL));
+            if (pDevice->abyCCKPwrTbl[ii+1] == 0) {
+                pDevice->abyCCKPwrTbl[ii+1] = pDevice->byCCKPwr;
+            }
+            pDevice->abyOFDMPwrTbl[ii+1] = SROMbyReadEmbedded(pDevice->PortOffset, (BYTE)(ii + EEP_OFS_OFDM_PWR_TBL));
+            if (pDevice->abyOFDMPwrTbl[ii+1] == 0) {
+                pDevice->abyOFDMPwrTbl[ii+1] = pDevice->byOFDMPwrG;
+            }
+            pDevice->abyCCKDefaultPwr[ii+1] = byCCKPwrdBm;
+            pDevice->abyOFDMDefaultPwr[ii+1] = byOFDMPwrdBm;
+        }
+		//2008-8-4 <add> by chester
+	  //recover 12,13 ,14channel for EUROPE by 11 channel
+          if(((pDevice->abyEEPROM[EEP_OFS_ZONETYPE] == ZoneType_Japan) ||
+	        (pDevice->abyEEPROM[EEP_OFS_ZONETYPE] == ZoneType_Europe))&&
+	     (pDevice->byOriginalZonetype == ZoneType_USA)) {
+	    for(ii=11;ii<14;ii++) {
+                pDevice->abyCCKPwrTbl[ii] = pDevice->abyCCKPwrTbl[10];
+	       pDevice->abyOFDMPwrTbl[ii] = pDevice->abyOFDMPwrTbl[10];
+
+	    }
+	  }
+
+
+        // Load OFDM A Power Table
+        for (ii=0;ii<CB_MAX_CHANNEL_5G;ii++) { //RobertYu:20041224, bug using CB_MAX_CHANNEL
+            pDevice->abyOFDMPwrTbl[ii+CB_MAX_CHANNEL_24G+1] = SROMbyReadEmbedded(pDevice->PortOffset, (BYTE)(ii + EEP_OFS_OFDMA_PWR_TBL));
+            pDevice->abyOFDMDefaultPwr[ii+CB_MAX_CHANNEL_24G+1] = SROMbyReadEmbedded(pDevice->PortOffset, (BYTE)(ii + EEP_OFS_OFDMA_PWR_dBm));
+        }
+        CARDvInitChannelTable((PVOID)pDevice);
+
+
+        if (pDevice->byLocalID > REV_ID_VT3253_B1) {
+            MACvSelectPage1(pDevice->PortOffset);
+            VNSvOutPortB(pDevice->PortOffset + MAC_REG_MSRCTL + 1, (MSRCTL1_TXPWR | MSRCTL1_CSAPAREN));
+            MACvSelectPage0(pDevice->PortOffset);
+        }
+
+
+         // use relative tx timeout and 802.11i D4
+        MACvWordRegBitsOn(pDevice->PortOffset, MAC_REG_CFG, (CFG_TKIPOPT | CFG_NOTXTIMEOUT));
+
+        // set performance parameter by registry
+        MACvSetShortRetryLimit(pDevice->PortOffset, pDevice->byShortRetryLimit);
+        MACvSetLongRetryLimit(pDevice->PortOffset, pDevice->byLongRetryLimit);
+
+        // reset TSF counter
+        VNSvOutPortB(pDevice->PortOffset + MAC_REG_TFTCTL, TFTCTL_TSFCNTRST);
+        // enable TSF counter
+        VNSvOutPortB(pDevice->PortOffset + MAC_REG_TFTCTL, TFTCTL_TSFCNTREN);
+
+        // initialize BBP registers
+        BBbVT3253Init(pDevice);
+
+        if (pDevice->bUpdateBBVGA) {
+            pDevice->byBBVGACurrent = pDevice->abyBBVGA[0];
+            pDevice->byBBVGANew = pDevice->byBBVGACurrent;
+            BBvSetVGAGainOffset(pDevice, pDevice->abyBBVGA[0]);
+        }
+#ifdef	PLICE_DEBUG
+	//printk("init registers:RxAntennaMode is %x,TxAntennaMode is %x\n",pDevice->byRxAntennaMode,pDevice->byTxAntennaMode);
+#endif
+        BBvSetRxAntennaMode(pDevice->PortOffset, pDevice->byRxAntennaMode);
+        BBvSetTxAntennaMode(pDevice->PortOffset, pDevice->byTxAntennaMode);
+
+        pDevice->byCurrentCh = 0;
+
+        //pDevice->NetworkType = Ndis802_11Automode;
+        // Set BB and packet type at the same time.
+        // Set Short Slot Time, xIFS, and RSPINF.
+        if (pDevice->uConnectionRate == RATE_AUTO) {
+            pDevice->wCurrentRate = RATE_54M;
+        } else {
+            pDevice->wCurrentRate = (WORD)pDevice->uConnectionRate;
+        }
+
+        // default G Mode
+        VNTWIFIbConfigPhyMode(pDevice->pMgmt, PHY_TYPE_11G);
+        VNTWIFIbConfigPhyMode(pDevice->pMgmt, PHY_TYPE_AUTO);
+
+        pDevice->bRadioOff = FALSE;
+
+        pDevice->byRadioCtl = SROMbyReadEmbedded(pDevice->PortOffset, EEP_OFS_RADIOCTL);
+        pDevice->bHWRadioOff = FALSE;
+
+        if (pDevice->byRadioCtl & EEP_RADIOCTL_ENABLE) {
+            // Get GPIO
+            MACvGPIOIn(pDevice->PortOffset, &pDevice->byGPIO);
+//2008-4-14 <add> by chester for led issue
+ #ifdef FOR_LED_ON_NOTEBOOK
+if (BITbIsBitOn(pDevice->byGPIO,GPIO0_DATA)){pDevice->bHWRadioOff = TRUE;}
+if (BITbIsBitOff(pDevice->byGPIO,GPIO0_DATA)){pDevice->bHWRadioOff = FALSE;}
+
+            }
+        if ( (pDevice->bRadioControlOff == TRUE)) {
+            CARDbRadioPowerOff(pDevice);
+        }
+else  CARDbRadioPowerOn(pDevice);
+#else
+            if ((BITbIsBitOn(pDevice->byGPIO,GPIO0_DATA) && BITbIsBitOff(pDevice->byRadioCtl, EEP_RADIOCTL_INV)) ||
+                (BITbIsBitOff(pDevice->byGPIO,GPIO0_DATA) && BITbIsBitOn(pDevice->byRadioCtl, EEP_RADIOCTL_INV))) {
+                pDevice->bHWRadioOff = TRUE;
+            }
+        }
+        if ((pDevice->bHWRadioOff == TRUE) || (pDevice->bRadioControlOff == TRUE)) {
+            CARDbRadioPowerOff(pDevice);
+        }
+
+#endif
+    }
+            pMgmt->eScanType = WMAC_SCAN_PASSIVE;
+    // get Permanent network address
+    SROMvReadEtherAddress(pDevice->PortOffset, pDevice->abyCurrentNetAddr);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Network address = %02x-%02x-%02x=%02x-%02x-%02x\n",
+        pDevice->abyCurrentNetAddr[0],
+        pDevice->abyCurrentNetAddr[1],
+        pDevice->abyCurrentNetAddr[2],
+        pDevice->abyCurrentNetAddr[3],
+        pDevice->abyCurrentNetAddr[4],
+        pDevice->abyCurrentNetAddr[5]);
+
+
+    // reset Tx pointer
+    CARDvSafeResetRx(pDevice);
+    // reset Rx pointer
+    CARDvSafeResetTx(pDevice);
+
+    if (pDevice->byLocalID <= REV_ID_VT3253_A1) {
+        MACvRegBitsOn(pDevice->PortOffset, MAC_REG_RCR, RCR_WPAERR);
+    }
+
+    pDevice->eEncryptionStatus = Ndis802_11EncryptionDisabled;
+
+    // Turn On Rx DMA
+    MACvReceive0(pDevice->PortOffset);
+    MACvReceive1(pDevice->PortOffset);
+
+    // start the adapter
+    MACvStart(pDevice->PortOffset);
+
+    netif_stop_queue(pDevice->dev);
+
+
+}
+
+
+
+static VOID device_init_diversity_timer(PSDevice pDevice) {
+
+    init_timer(&pDevice->TimerSQ3Tmax1);
+    pDevice->TimerSQ3Tmax1.data = (ULONG)pDevice;
+    pDevice->TimerSQ3Tmax1.function = (TimerFunction)TimerSQ3CallBack;
+    pDevice->TimerSQ3Tmax1.expires = RUN_AT(HZ);
+
+    init_timer(&pDevice->TimerSQ3Tmax2);
+    pDevice->TimerSQ3Tmax2.data = (ULONG)pDevice;
+    pDevice->TimerSQ3Tmax2.function = (TimerFunction)TimerSQ3CallBack;
+    pDevice->TimerSQ3Tmax2.expires = RUN_AT(HZ);
+
+    init_timer(&pDevice->TimerSQ3Tmax3);
+    pDevice->TimerSQ3Tmax3.data = (ULONG)pDevice;
+    pDevice->TimerSQ3Tmax3.function = (TimerFunction)TimerState1CallBack;
+    pDevice->TimerSQ3Tmax3.expires = RUN_AT(HZ);
+
+    return;
+}
+
+
+static BOOL device_release_WPADEV(PSDevice pDevice)
+{
+  viawget_wpa_header *wpahdr;
+  int ii=0;
+ // wait_queue_head_t	Set_wait;
+  //send device close to wpa_supplicnat layer
+    if (pDevice->bWPADEVUp==TRUE) {
+                 wpahdr = (viawget_wpa_header *)pDevice->skb->data;
+                 wpahdr->type = VIAWGET_DEVICECLOSE_MSG;
+                 wpahdr->resp_ie_len = 0;
+                 wpahdr->req_ie_len = 0;
+                 skb_put(pDevice->skb, sizeof(viawget_wpa_header));
+                 pDevice->skb->dev = pDevice->wpadev;
+                 pDevice->skb->mac_header = pDevice->skb->data;
+                 pDevice->skb->pkt_type = PACKET_HOST;
+                 pDevice->skb->protocol = htons(ETH_P_802_2);
+                 memset(pDevice->skb->cb, 0, sizeof(pDevice->skb->cb));
+                 netif_rx(pDevice->skb);
+                 pDevice->skb = dev_alloc_skb((int)pDevice->rx_buf_sz);
+
+ //wait release WPADEV
+              //    init_waitqueue_head(&Set_wait);
+              //    wait_event_timeout(Set_wait, ((pDevice->wpadev==NULL)&&(pDevice->skb == NULL)),5*HZ);    //1s wait
+              while((pDevice->bWPADEVUp==TRUE)) {
+	        set_current_state(TASK_UNINTERRUPTIBLE);
+                 schedule_timeout (HZ/20);          //wait 50ms
+                 ii++;
+	        if(ii>20)
+		  break;
+              }
+           };
+    return TRUE;
+}
+
+
+static const struct net_device_ops device_netdev_ops = {
+    .ndo_open               = device_open,
+    .ndo_stop               = device_close,
+    .ndo_do_ioctl           = device_ioctl,
+    .ndo_get_stats          = device_get_stats,
+    .ndo_start_xmit         = device_xmit,
+    .ndo_set_multicast_list = device_set_multi,
+};
+
+
+#ifndef PRIVATE_OBJ
+
+static int
+device_found1(struct pci_dev *pcid, const struct pci_device_id *ent)
+{
+    static BOOL bFirst = TRUE;
+    struct net_device*  dev = NULL;
+    PCHIP_INFO  pChip_info = (PCHIP_INFO)ent->driver_data;
+    PSDevice    pDevice;
+    int         rc;
+    if (device_nics ++>= MAX_UINTS) {
+        printk(KERN_NOTICE DEVICE_NAME ": already found %d NICs\n", device_nics);
+        return -ENODEV;
+    }
+
+
+    dev = alloc_etherdev(sizeof(DEVICE_INFO));
+
+    pDevice = (PSDevice) netdev_priv(dev);
+
+    if (dev == NULL) {
+        printk(KERN_ERR DEVICE_NAME ": allocate net device failed \n");
+        return -ENODEV;
+    }
+
+    // Chain it all together
+   // SET_MODULE_OWNER(dev);
+    SET_NETDEV_DEV(dev, &pcid->dev);
+
+    if (bFirst) {
+        printk(KERN_NOTICE "%s Ver. %s\n",DEVICE_FULL_DRV_NAM, DEVICE_VERSION);
+        printk(KERN_NOTICE "Copyright (c) 2003 VIA Networking Technologies, Inc.\n");
+        bFirst=FALSE;
+    }
+
+    if (!device_init_info(pcid, &pDevice, pChip_info)) {
+        return -ENOMEM;
+    }
+    pDevice->dev = dev;
+    pDevice->next_module = root_device_dev;
+    root_device_dev = dev;
+    dev->irq = pcid->irq;
+
+    if (pci_enable_device(pcid)) {
+        device_free_info(pDevice);
+        return -ENODEV;
+    }
+#ifdef	DEBUG
+	printk("Before get pci_info memaddr is %x\n",pDevice->memaddr);
+#endif
+    if (device_get_pci_info(pDevice,pcid) == FALSE) {
+        printk(KERN_ERR DEVICE_NAME ": Failed to find PCI device.\n");
+        device_free_info(pDevice);
+        return -ENODEV;
+    }
+
+#if 1
+
+#ifdef	DEBUG
+
+	//pci_read_config_byte(pcid, PCI_BASE_ADDRESS_0, &pDevice->byRevId);
+	printk("after get pci_info memaddr is %x, io addr is %x,io_size is %d\n",pDevice->memaddr,pDevice->ioaddr,pDevice->io_size);
+	{
+		int i;
+		U32			bar,len;
+		u32 address[] = {
+		PCI_BASE_ADDRESS_0,
+		PCI_BASE_ADDRESS_1,
+		PCI_BASE_ADDRESS_2,
+		PCI_BASE_ADDRESS_3,
+		PCI_BASE_ADDRESS_4,
+		PCI_BASE_ADDRESS_5,
+		0};
+		for (i=0;address[i];i++)
+		{
+			//pci_write_config_dword(pcid,address[i], 0xFFFFFFFF);
+			pci_read_config_dword(pcid, address[i], &bar);
+			printk("bar %d is %x\n",i,bar);
+			if (!bar)
+			{
+				printk("bar %d not implemented\n",i);
+				continue;
+			}
+			if (bar & PCI_BASE_ADDRESS_SPACE_IO) {
+			/* This is IO */
+
+			len = bar & (PCI_BASE_ADDRESS_IO_MASK & 0xFFFF);
+			len = len & ~(len - 1);
+
+			printk("IO space:  len in IO %x, BAR %d\n", len, i);
+			}
+			else
+			{
+				len = bar & 0xFFFFFFF0;
+				len = ~len + 1;
+
+				printk("len in MEM %x, BAR %d\n", len, i);
+			}
+		}
+	}
+#endif
+
+
+#endif
+
+#ifdef	DEBUG
+	//return  0  ;
+#endif
+    pDevice->PortOffset = (DWORD)ioremap(pDevice->memaddr & PCI_BASE_ADDRESS_MEM_MASK, pDevice->io_size);
+	//pDevice->PortOffset = (DWORD)ioremap(pDevice->ioaddr & PCI_BASE_ADDRESS_IO_MASK, pDevice->io_size);
+
+	if(pDevice->PortOffset == 0) {
+       printk(KERN_ERR DEVICE_NAME ": Failed to IO remapping ..\n");
+       device_free_info(pDevice);
+        return -ENODEV;
+    }
+
+
+
+
+    rc = pci_request_regions(pcid, DEVICE_NAME);
+    if (rc) {
+        printk(KERN_ERR DEVICE_NAME ": Failed to find PCI device\n");
+        device_free_info(pDevice);
+        return -ENODEV;
+    }
+
+    dev->base_addr = pDevice->ioaddr;
+#ifdef	PLICE_DEBUG
+	BYTE	value;
+
+	VNSvInPortB(pDevice->PortOffset+0x4F, &value);
+	printk("Before write: value is %x\n",value);
+	//VNSvInPortB(pDevice->PortOffset+0x3F, 0x00);
+	VNSvOutPortB(pDevice->PortOffset,value);
+	VNSvInPortB(pDevice->PortOffset+0x4F, &value);
+	printk("After write: value is %x\n",value);
+#endif
+
+
+
+#ifdef IO_MAP
+    pDevice->PortOffset = pDevice->ioaddr;
+#endif
+    // do reset
+    if (!MACbSoftwareReset(pDevice->PortOffset)) {
+        printk(KERN_ERR DEVICE_NAME ": Failed to access MAC hardware..\n");
+        device_free_info(pDevice);
+        return -ENODEV;
+    }
+    // initial to reload eeprom
+    MACvInitialize(pDevice->PortOffset);
+    MACvReadEtherAddress(pDevice->PortOffset, dev->dev_addr);
+
+    device_get_options(pDevice, device_nics-1, dev->name);
+    device_set_options(pDevice);
+    //Mask out the options cannot be set to the chip
+    pDevice->sOpts.flags &= pChip_info->flags;
+
+    //Enable the chip specified capbilities
+    pDevice->flags = pDevice->sOpts.flags | (pChip_info->flags & 0xFF000000UL);
+    pDevice->tx_80211 = device_dma0_tx_80211;
+    pDevice->sMgmtObj.pAdapter = (PVOID)pDevice;
+    pDevice->pMgmt = &(pDevice->sMgmtObj);
+
+    dev->irq                = pcid->irq;
+    dev->netdev_ops         = &device_netdev_ops;
+
+#ifdef WIRELESS_EXT
+//Einsn Modify for ubuntu-7.04
+//	dev->wireless_handlers->get_wireless_stats = iwctl_get_wireless_stats;
+#if WIRELESS_EXT > 12
+	dev->wireless_handlers = (struct iw_handler_def *)&iwctl_handler_def;
+//	netdev->wireless_handlers = NULL;
+#endif /* WIRELESS_EXT > 12 */
+#endif /* WIRELESS_EXT */
+
+    rc = register_netdev(dev);
+    if (rc)
+    {
+        printk(KERN_ERR DEVICE_NAME " Failed to register netdev\n");
+        device_free_info(pDevice);
+        return -ENODEV;
+    }
+//2008-07-21-01<Add>by MikeLiu
+//register wpadev
+   if(wpa_set_wpadev(pDevice, 1)!=0) {
+     printk("Fail to Register WPADEV?\n");
+        unregister_netdev(pDevice->dev);
+        free_netdev(dev);
+   }
+    device_print_info(pDevice);
+    pci_set_drvdata(pcid, pDevice);
+    return 0;
+
+}
+
+static void device_print_info(PSDevice pDevice)
+{
+    struct net_device* dev=pDevice->dev;
+
+    DEVICE_PRT(MSG_LEVEL_INFO, KERN_INFO "%s: %s\n",dev->name, get_chip_name(pDevice->chip_id));
+    DEVICE_PRT(MSG_LEVEL_INFO, KERN_INFO "%s: MAC=%2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X",
+        dev->name,
+        dev->dev_addr[0],dev->dev_addr[1],dev->dev_addr[2],
+        dev->dev_addr[3],dev->dev_addr[4],dev->dev_addr[5]);
+#ifdef IO_MAP
+    DEVICE_PRT(MSG_LEVEL_INFO, KERN_INFO" IO=0x%lx  ",(ULONG) pDevice->ioaddr);
+    DEVICE_PRT(MSG_LEVEL_INFO, KERN_INFO" IRQ=%d \n", pDevice->dev->irq);
+#else
+    DEVICE_PRT(MSG_LEVEL_INFO, KERN_INFO" IO=0x%lx Mem=0x%lx ",(ULONG) pDevice->ioaddr,(ULONG) pDevice->PortOffset);
+    DEVICE_PRT(MSG_LEVEL_INFO, KERN_INFO" IRQ=%d \n", pDevice->dev->irq);
+#endif
+
+}
+
+static BOOL device_init_info(struct pci_dev* pcid, PSDevice* ppDevice,
+    PCHIP_INFO pChip_info) {
+
+    PSDevice p;
+
+    memset(*ppDevice,0,sizeof(DEVICE_INFO));
+
+    if (pDevice_Infos == NULL) {
+        pDevice_Infos =*ppDevice;
+    }
+    else {
+        for (p=pDevice_Infos;p->next!=NULL;p=p->next)
+            do {} while (0);
+        p->next = *ppDevice;
+        (*ppDevice)->prev = p;
+    }
+
+    (*ppDevice)->pcid = pcid;
+    (*ppDevice)->chip_id = pChip_info->chip_id;
+    (*ppDevice)->io_size = pChip_info->io_size;
+    (*ppDevice)->nTxQueues = pChip_info->nTxQueue;
+    (*ppDevice)->multicast_limit =32;
+
+    spin_lock_init(&((*ppDevice)->lock));
+
+    return TRUE;
+}
+
+static BOOL device_get_pci_info(PSDevice pDevice, struct pci_dev* pcid) {
+
+    U16 pci_cmd;
+    U8  b;
+    UINT cis_addr;
+#ifdef	PLICE_DEBUG
+	BYTE       pci_config[256];
+	BYTE	value =0x00;
+	int		ii,j;
+	U16	max_lat=0x0000;
+	memset(pci_config,0x00,256);
+#endif
+
+    pci_read_config_byte(pcid, PCI_REVISION_ID, &pDevice->byRevId);
+    pci_read_config_word(pcid, PCI_SUBSYSTEM_ID,&pDevice->SubSystemID);
+    pci_read_config_word(pcid, PCI_SUBSYSTEM_VENDOR_ID, &pDevice->SubVendorID);
+    pci_read_config_word(pcid, PCI_COMMAND, (u16 *) & (pci_cmd));
+
+    pci_set_master(pcid);
+
+    pDevice->memaddr = pci_resource_start(pcid,0);
+    pDevice->ioaddr = pci_resource_start(pcid,1);
+
+#ifdef	DEBUG
+//	pDevice->ioaddr = pci_resource_start(pcid, 0);
+//	pDevice->memaddr = pci_resource_start(pcid,1);
+#endif
+
+    cis_addr = pci_resource_start(pcid,2);
+
+    pDevice->pcid = pcid;
+
+    pci_read_config_byte(pcid, PCI_REG_COMMAND, &b);
+    pci_write_config_byte(pcid, PCI_REG_COMMAND, (b|COMMAND_BUSM));
+
+#ifdef	PLICE_DEBUG
+   	//pci_read_config_word(pcid,PCI_REG_MAX_LAT,&max_lat);
+	//printk("max lat is %x,SubSystemID is %x\n",max_lat,pDevice->SubSystemID);
+	//for (ii=0;ii<0xFF;ii++)
+	//pci_read_config_word(pcid,PCI_REG_MAX_LAT,&max_lat);
+	//max_lat  = 0x20;
+	//pci_write_config_word(pcid,PCI_REG_MAX_LAT,max_lat);
+	//pci_read_config_word(pcid,PCI_REG_MAX_LAT,&max_lat);
+	//printk("max lat is %x\n",max_lat);
+
+	for (ii=0;ii<0xFF;ii++)
+	{
+		pci_read_config_byte(pcid,ii,&value);
+		pci_config[ii] = value;
+	}
+	for (ii=0,j=1;ii<0x100;ii++,j++)
+	{
+		if (j %16 == 0)
+		{
+			printk("%x:",pci_config[ii]);
+			printk("\n");
+		}
+		else
+		{
+			printk("%x:",pci_config[ii]);
+		}
+	}
+#endif
+    return TRUE;
+}
+
+static void device_free_info(PSDevice pDevice) {
+    PSDevice         ptr;
+    struct net_device*  dev=pDevice->dev;
+
+    ASSERT(pDevice);
+//2008-0714-01<Add>by chester
+device_release_WPADEV(pDevice);
+
+//2008-07-21-01<Add>by MikeLiu
+//unregister wpadev
+   if(wpa_set_wpadev(pDevice, 0)!=0)
+     printk("unregister wpadev fail?\n");
+
+    if (pDevice_Infos==NULL)
+        return;
+
+    for (ptr=pDevice_Infos;ptr && (ptr!=pDevice);ptr=ptr->next)
+            do {} while (0);
+
+    if (ptr==pDevice) {
+        if (ptr==pDevice_Infos)
+            pDevice_Infos=ptr->next;
+        else
+            ptr->prev->next=ptr->next;
+    }
+    else {
+        DEVICE_PRT(MSG_LEVEL_ERR, KERN_ERR "info struct not found\n");
+        return;
+    }
+#ifdef HOSTAP
+    if (dev)
+        hostap_set_hostapd(pDevice, 0, 0);
+#endif
+    if (dev)
+        unregister_netdev(dev);
+
+    if (pDevice->PortOffset)
+        iounmap((PVOID)pDevice->PortOffset);
+
+    if (pDevice->pcid)
+        pci_release_regions(pDevice->pcid);
+    if (dev)
+        free_netdev(dev);
+
+    if (pDevice->pcid) {
+        pci_set_drvdata(pDevice->pcid,NULL);
+    }
+}
+#endif// ifndef PRIVATE_OBJ
+
+static BOOL device_init_rings(PSDevice pDevice) {
+    void*   vir_pool;
+
+
+    /*allocate all RD/TD rings a single pool*/
+    vir_pool = pci_alloc_consistent(pDevice->pcid,
+                    pDevice->sOpts.nRxDescs0 * sizeof(SRxDesc) +
+                    pDevice->sOpts.nRxDescs1 * sizeof(SRxDesc) +
+                    pDevice->sOpts.nTxDescs[0] * sizeof(STxDesc) +
+                    pDevice->sOpts.nTxDescs[1] * sizeof(STxDesc),
+                    &pDevice->pool_dma);
+
+    if (vir_pool == NULL) {
+        DEVICE_PRT(MSG_LEVEL_ERR,KERN_ERR "%s : allocate desc dma memory failed\n", pDevice->dev->name);
+        return FALSE;
+    }
+
+    memset(vir_pool, 0,
+            pDevice->sOpts.nRxDescs0 * sizeof(SRxDesc) +
+            pDevice->sOpts.nRxDescs1 * sizeof(SRxDesc) +
+            pDevice->sOpts.nTxDescs[0] * sizeof(STxDesc) +
+            pDevice->sOpts.nTxDescs[1] * sizeof(STxDesc)
+          );
+
+    pDevice->aRD0Ring = vir_pool;
+    pDevice->aRD1Ring = vir_pool +
+                        pDevice->sOpts.nRxDescs0 * sizeof(SRxDesc);
+
+
+    pDevice->rd0_pool_dma = pDevice->pool_dma;
+    pDevice->rd1_pool_dma = pDevice->rd0_pool_dma +
+                            pDevice->sOpts.nRxDescs0 * sizeof(SRxDesc);
+
+    pDevice->tx0_bufs = pci_alloc_consistent(pDevice->pcid,
+                    pDevice->sOpts.nTxDescs[0] * PKT_BUF_SZ +
+                    pDevice->sOpts.nTxDescs[1] * PKT_BUF_SZ +
+                    CB_BEACON_BUF_SIZE +
+                    CB_MAX_BUF_SIZE,
+                    &pDevice->tx_bufs_dma0);
+
+    if (pDevice->tx0_bufs == NULL) {
+        DEVICE_PRT(MSG_LEVEL_ERR,KERN_ERR "%s: allocate buf dma memory failed\n", pDevice->dev->name);
+        pci_free_consistent(pDevice->pcid,
+            pDevice->sOpts.nRxDescs0 * sizeof(SRxDesc) +
+            pDevice->sOpts.nRxDescs1 * sizeof(SRxDesc) +
+            pDevice->sOpts.nTxDescs[0] * sizeof(STxDesc) +
+            pDevice->sOpts.nTxDescs[1] * sizeof(STxDesc),
+            vir_pool, pDevice->pool_dma
+            );
+        return FALSE;
+    }
+
+    memset(pDevice->tx0_bufs, 0,
+           pDevice->sOpts.nTxDescs[0] * PKT_BUF_SZ +
+           pDevice->sOpts.nTxDescs[1] * PKT_BUF_SZ +
+           CB_BEACON_BUF_SIZE +
+           CB_MAX_BUF_SIZE
+          );
+
+    pDevice->td0_pool_dma = pDevice->rd1_pool_dma +
+            pDevice->sOpts.nRxDescs1 * sizeof(SRxDesc);
+
+    pDevice->td1_pool_dma = pDevice->td0_pool_dma +
+            pDevice->sOpts.nTxDescs[0] * sizeof(STxDesc);
+
+
+    // vir_pool: pvoid type
+    pDevice->apTD0Rings = vir_pool
+                          + pDevice->sOpts.nRxDescs0 * sizeof(SRxDesc)
+                          + pDevice->sOpts.nRxDescs1 * sizeof(SRxDesc);
+
+    pDevice->apTD1Rings = vir_pool
+            + pDevice->sOpts.nRxDescs0 * sizeof(SRxDesc)
+            + pDevice->sOpts.nRxDescs1 * sizeof(SRxDesc)
+            + pDevice->sOpts.nTxDescs[0] * sizeof(STxDesc);
+
+
+    pDevice->tx1_bufs = pDevice->tx0_bufs +
+            pDevice->sOpts.nTxDescs[0] * PKT_BUF_SZ;
+
+
+    pDevice->tx_beacon_bufs = pDevice->tx1_bufs +
+            pDevice->sOpts.nTxDescs[1] * PKT_BUF_SZ;
+
+    pDevice->pbyTmpBuff = pDevice->tx_beacon_bufs +
+            CB_BEACON_BUF_SIZE;
+
+    pDevice->tx_bufs_dma1 = pDevice->tx_bufs_dma0 +
+            pDevice->sOpts.nTxDescs[0] * PKT_BUF_SZ;
+
+
+    pDevice->tx_beacon_dma = pDevice->tx_bufs_dma1 +
+            pDevice->sOpts.nTxDescs[1] * PKT_BUF_SZ;
+
+
+    return TRUE;
+}
+
+static void device_free_rings(PSDevice pDevice) {
+
+    pci_free_consistent(pDevice->pcid,
+            pDevice->sOpts.nRxDescs0 * sizeof(SRxDesc) +
+            pDevice->sOpts.nRxDescs1 * sizeof(SRxDesc) +
+            pDevice->sOpts.nTxDescs[0] * sizeof(STxDesc) +
+            pDevice->sOpts.nTxDescs[1] * sizeof(STxDesc)
+            ,
+            pDevice->aRD0Ring, pDevice->pool_dma
+        );
+
+    if (pDevice->tx0_bufs)
+        pci_free_consistent(pDevice->pcid,
+           pDevice->sOpts.nTxDescs[0] * PKT_BUF_SZ +
+           pDevice->sOpts.nTxDescs[1] * PKT_BUF_SZ +
+           CB_BEACON_BUF_SIZE +
+           CB_MAX_BUF_SIZE,
+           pDevice->tx0_bufs, pDevice->tx_bufs_dma0
+        );
+}
+
+static void device_init_rd0_ring(PSDevice pDevice) {
+    int i;
+    dma_addr_t      curr = pDevice->rd0_pool_dma;
+    PSRxDesc        pDesc;
+
+    /* Init the RD0 ring entries */
+    for (i = 0; i < pDevice->sOpts.nRxDescs0; i ++, curr += sizeof(SRxDesc)) {
+        pDesc = &(pDevice->aRD0Ring[i]);
+        pDesc->pRDInfo = alloc_rd_info();
+        ASSERT(pDesc->pRDInfo);
+        if (!device_alloc_rx_buf(pDevice, pDesc)) {
+            DEVICE_PRT(MSG_LEVEL_ERR,KERN_ERR "%s: can not alloc rx bufs\n",
+            pDevice->dev->name);
+        }
+        pDesc->next = &(pDevice->aRD0Ring[(i+1) % pDevice->sOpts.nRxDescs0]);
+        pDesc->pRDInfo->curr_desc = cpu_to_le32(curr);
+        pDesc->next_desc = cpu_to_le32(curr + sizeof(SRxDesc));
+    }
+
+    pDevice->aRD0Ring[i-1].next_desc = cpu_to_le32(pDevice->rd0_pool_dma);
+    pDevice->pCurrRD[0] = &(pDevice->aRD0Ring[0]);
+}
+
+
+static void device_init_rd1_ring(PSDevice pDevice) {
+    int i;
+    dma_addr_t      curr = pDevice->rd1_pool_dma;
+    PSRxDesc        pDesc;
+
+    /* Init the RD1 ring entries */
+    for (i = 0; i < pDevice->sOpts.nRxDescs1; i ++, curr += sizeof(SRxDesc)) {
+        pDesc = &(pDevice->aRD1Ring[i]);
+        pDesc->pRDInfo = alloc_rd_info();
+        ASSERT(pDesc->pRDInfo);
+        if (!device_alloc_rx_buf(pDevice, pDesc)) {
+            DEVICE_PRT(MSG_LEVEL_ERR,KERN_ERR "%s: can not alloc rx bufs\n",
+            pDevice->dev->name);
+        }
+        pDesc->next = &(pDevice->aRD1Ring[(i+1) % pDevice->sOpts.nRxDescs1]);
+        pDesc->pRDInfo->curr_desc = cpu_to_le32(curr);
+        pDesc->next_desc = cpu_to_le32(curr + sizeof(SRxDesc));
+    }
+
+    pDevice->aRD1Ring[i-1].next_desc = cpu_to_le32(pDevice->rd1_pool_dma);
+    pDevice->pCurrRD[1] = &(pDevice->aRD1Ring[0]);
+}
+
+
+static void device_init_defrag_cb(PSDevice pDevice) {
+    int i;
+    PSDeFragControlBlock pDeF;
+
+    /* Init the fragment ctl entries */
+    for (i = 0; i < CB_MAX_RX_FRAG; i++) {
+        pDeF = &(pDevice->sRxDFCB[i]);
+        if (!device_alloc_frag_buf(pDevice, pDeF)) {
+            DEVICE_PRT(MSG_LEVEL_ERR,KERN_ERR "%s: can not alloc frag bufs\n",
+                pDevice->dev->name);
+        };
+    }
+    pDevice->cbDFCB = CB_MAX_RX_FRAG;
+    pDevice->cbFreeDFCB = pDevice->cbDFCB;
+}
+
+
+
+
+static void device_free_rd0_ring(PSDevice pDevice) {
+    int i;
+
+    for (i = 0; i < pDevice->sOpts.nRxDescs0; i++) {
+        PSRxDesc        pDesc =&(pDevice->aRD0Ring[i]);
+        PDEVICE_RD_INFO  pRDInfo =pDesc->pRDInfo;
+
+        pci_unmap_single(pDevice->pcid,pRDInfo->skb_dma,
+           pDevice->rx_buf_sz, PCI_DMA_FROMDEVICE);
+
+        dev_kfree_skb(pRDInfo->skb);
+
+        kfree((PVOID)pDesc->pRDInfo);
+    }
+
+}
+
+static void device_free_rd1_ring(PSDevice pDevice) {
+    int i;
+
+
+    for (i = 0; i < pDevice->sOpts.nRxDescs1; i++) {
+        PSRxDesc        pDesc=&(pDevice->aRD1Ring[i]);
+        PDEVICE_RD_INFO  pRDInfo=pDesc->pRDInfo;
+
+        pci_unmap_single(pDevice->pcid,pRDInfo->skb_dma,
+           pDevice->rx_buf_sz, PCI_DMA_FROMDEVICE);
+
+        dev_kfree_skb(pRDInfo->skb);
+
+        kfree((PVOID)pDesc->pRDInfo);
+    }
+
+}
+
+static void device_free_frag_buf(PSDevice pDevice) {
+    PSDeFragControlBlock pDeF;
+    int i;
+
+    for (i = 0; i < CB_MAX_RX_FRAG; i++) {
+
+        pDeF = &(pDevice->sRxDFCB[i]);
+
+        if (pDeF->skb)
+            dev_kfree_skb(pDeF->skb);
+
+    }
+
+}
+
+static void device_init_td0_ring(PSDevice pDevice) {
+    int i;
+    dma_addr_t  curr;
+    PSTxDesc        pDesc;
+
+    curr = pDevice->td0_pool_dma;
+    for (i = 0; i < pDevice->sOpts.nTxDescs[0]; i++, curr += sizeof(STxDesc)) {
+        pDesc = &(pDevice->apTD0Rings[i]);
+        pDesc->pTDInfo = alloc_td_info();
+        ASSERT(pDesc->pTDInfo);
+        if (pDevice->flags & DEVICE_FLAGS_TX_ALIGN) {
+            pDesc->pTDInfo->buf = pDevice->tx0_bufs + (i)*PKT_BUF_SZ;
+            pDesc->pTDInfo->buf_dma = pDevice->tx_bufs_dma0 + (i)*PKT_BUF_SZ;
+        }
+        pDesc->next =&(pDevice->apTD0Rings[(i+1) % pDevice->sOpts.nTxDescs[0]]);
+        pDesc->pTDInfo->curr_desc = cpu_to_le32(curr);
+        pDesc->next_desc = cpu_to_le32(curr+sizeof(STxDesc));
+    }
+
+    pDevice->apTD0Rings[i-1].next_desc = cpu_to_le32(pDevice->td0_pool_dma);
+    pDevice->apTailTD[0] = pDevice->apCurrTD[0] =&(pDevice->apTD0Rings[0]);
+
+}
+
+static void device_init_td1_ring(PSDevice pDevice) {
+    int i;
+    dma_addr_t  curr;
+    PSTxDesc    pDesc;
+
+    /* Init the TD ring entries */
+    curr=pDevice->td1_pool_dma;
+    for (i = 0; i < pDevice->sOpts.nTxDescs[1]; i++, curr+=sizeof(STxDesc)) {
+        pDesc=&(pDevice->apTD1Rings[i]);
+        pDesc->pTDInfo = alloc_td_info();
+        ASSERT(pDesc->pTDInfo);
+        if (pDevice->flags & DEVICE_FLAGS_TX_ALIGN) {
+            pDesc->pTDInfo->buf=pDevice->tx1_bufs+(i)*PKT_BUF_SZ;
+            pDesc->pTDInfo->buf_dma=pDevice->tx_bufs_dma1+(i)*PKT_BUF_SZ;
+        }
+        pDesc->next=&(pDevice->apTD1Rings[(i+1) % pDevice->sOpts.nTxDescs[1]]);
+        pDesc->pTDInfo->curr_desc = cpu_to_le32(curr);
+        pDesc->next_desc = cpu_to_le32(curr+sizeof(STxDesc));
+    }
+
+    pDevice->apTD1Rings[i-1].next_desc = cpu_to_le32(pDevice->td1_pool_dma);
+    pDevice->apTailTD[1] = pDevice->apCurrTD[1] = &(pDevice->apTD1Rings[0]);
+}
+
+
+
+static void device_free_td0_ring(PSDevice pDevice) {
+    int i;
+    for (i = 0; i < pDevice->sOpts.nTxDescs[0]; i++) {
+        PSTxDesc        pDesc=&(pDevice->apTD0Rings[i]);
+        PDEVICE_TD_INFO  pTDInfo=pDesc->pTDInfo;
+
+        if (pTDInfo->skb_dma && (pTDInfo->skb_dma != pTDInfo->buf_dma))
+            pci_unmap_single(pDevice->pcid,pTDInfo->skb_dma,
+               pTDInfo->skb->len, PCI_DMA_TODEVICE);
+
+        if (pTDInfo->skb)
+            dev_kfree_skb(pTDInfo->skb);
+
+        kfree((PVOID)pDesc->pTDInfo);
+    }
+}
+
+static void device_free_td1_ring(PSDevice pDevice) {
+    int i;
+
+    for (i = 0; i < pDevice->sOpts.nTxDescs[1]; i++) {
+        PSTxDesc        pDesc=&(pDevice->apTD1Rings[i]);
+        PDEVICE_TD_INFO  pTDInfo=pDesc->pTDInfo;
+
+        if (pTDInfo->skb_dma && (pTDInfo->skb_dma != pTDInfo->buf_dma))
+            pci_unmap_single(pDevice->pcid, pTDInfo->skb_dma,
+               pTDInfo->skb->len, PCI_DMA_TODEVICE);
+
+        if (pTDInfo->skb)
+            dev_kfree_skb(pTDInfo->skb);
+
+        kfree((PVOID)pDesc->pTDInfo);
+    }
+
+}
+
+
+
+/*-----------------------------------------------------------------*/
+
+static int device_rx_srv(PSDevice pDevice, UINT uIdx) {
+    PSRxDesc    pRD;
+    int works = 0;
+
+
+    for (pRD = pDevice->pCurrRD[uIdx];
+         pRD->m_rd0RD0.f1Owner == OWNED_BY_HOST;
+         pRD = pRD->next) {
+//        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "pDevice->pCurrRD = %x, works = %d\n", pRD, works);
+        if (works++>15)
+            break;
+        if (device_receive_frame(pDevice, pRD)) {
+            if (!device_alloc_rx_buf(pDevice,pRD)) {
+                    DEVICE_PRT(MSG_LEVEL_ERR, KERN_ERR
+                    "%s: can not allocate rx buf\n", pDevice->dev->name);
+                    break;
+            }
+        }
+        pRD->m_rd0RD0.f1Owner = OWNED_BY_NIC;
+#ifdef PRIVATE_OBJ
+        ref_set_rx_jiffies(pDevice->dev);
+#else
+        pDevice->dev->last_rx = jiffies;
+#endif
+    }
+
+    pDevice->pCurrRD[uIdx]=pRD;
+
+    return works;
+}
+
+
+static BOOL device_alloc_rx_buf(PSDevice pDevice, PSRxDesc pRD) {
+
+    PDEVICE_RD_INFO pRDInfo=pRD->pRDInfo;
+
+#ifdef PRIVATE_OBJ
+
+    pRDInfo->skb=dev_alloc_skb(pDevice->rx_buf_sz);
+    if (pRDInfo->skb==NULL)
+        return FALSE;
+    ref_skb_remap(pDevice->dev, &(pRDInfo->ref_skb), pRDInfo->skb);
+    pRDInfo->skb_dma = pci_map_single(pDevice->pcid, pRDInfo->ref_skb.tail, pDevice->rx_buf_sz,
+                        PCI_DMA_FROMDEVICE);
+#else
+
+    pRDInfo->skb = dev_alloc_skb((int)pDevice->rx_buf_sz);
+#ifdef	PLICE_DEBUG
+	//printk("device_alloc_rx_buf:skb is %x\n",pRDInfo->skb);
+#endif
+    if (pRDInfo->skb==NULL)
+        return FALSE;
+    ASSERT(pRDInfo->skb);
+    pRDInfo->skb->dev = pDevice->dev;
+    pRDInfo->skb_dma = pci_map_single(pDevice->pcid, pRDInfo->skb->tail, pDevice->rx_buf_sz,
+                        PCI_DMA_FROMDEVICE);
+#endif
+    *((PU32) &(pRD->m_rd0RD0)) = 0;
+
+    pRD->m_rd0RD0.wResCount = cpu_to_le16(pDevice->rx_buf_sz);
+    pRD->m_rd0RD0.f1Owner = OWNED_BY_NIC;
+    pRD->m_rd1RD1.wReqCount = cpu_to_le16(pDevice->rx_buf_sz);
+    pRD->buff_addr = cpu_to_le32(pRDInfo->skb_dma);
+
+    return TRUE;
+}
+
+
+
+BOOL device_alloc_frag_buf(PSDevice pDevice, PSDeFragControlBlock pDeF) {
+
+#ifdef PRIVATE_OBJ
+
+    pDeF->skb=dev_alloc_skb(pDevice->rx_buf_sz);
+    if (pDeF->skb==NULL)
+        return FALSE;
+    ref_skb_remap(pDevice->dev, &(pDeF->ref_skb), pDeF->skb);
+
+#else
+    pDeF->skb = dev_alloc_skb((int)pDevice->rx_buf_sz);
+    if (pDeF->skb == NULL)
+        return FALSE;
+    ASSERT(pDeF->skb);
+    pDeF->skb->dev = pDevice->dev;
+#endif
+
+    return TRUE;
+}
+
+
+
+static int device_tx_srv(PSDevice pDevice, UINT uIdx) {
+    PSTxDesc                 pTD;
+    BOOL                     bFull=FALSE;
+    int                      works = 0;
+    BYTE                     byTsr0;
+    BYTE                     byTsr1;
+    UINT                     uFrameSize, uFIFOHeaderSize;
+    PSTxBufHead              pTxBufHead;
+    struct net_device_stats* pStats = &pDevice->stats;
+    struct sk_buff*          skb;
+    UINT                     uNodeIndex;
+    PSMgmtObject             pMgmt = pDevice->pMgmt;
+#ifdef PRIVATE_OBJ
+    ref_sk_buff              ref_skb;
+#endif
+
+
+    for (pTD = pDevice->apTailTD[uIdx]; pDevice->iTDUsed[uIdx] >0; pTD = pTD->next) {
+
+        if (pTD->m_td0TD0.f1Owner == OWNED_BY_NIC)
+            break;
+        if (works++>15)
+            break;
+
+        byTsr0 = pTD->m_td0TD0.byTSR0;
+        byTsr1 = pTD->m_td0TD0.byTSR1;
+
+        //Only the status of first TD in the chain is correct
+        if (pTD->m_td1TD1.byTCR & TCR_STP) {
+
+            if ((pTD->pTDInfo->byFlags & TD_FLAGS_NETIF_SKB) != 0) {
+                uFIFOHeaderSize = pTD->pTDInfo->dwHeaderLength;
+                uFrameSize = pTD->pTDInfo->dwReqCount - uFIFOHeaderSize;
+                pTxBufHead = (PSTxBufHead) (pTD->pTDInfo->buf);
+#ifdef PRIVATE_OBJ
+                ref_skb_remap(pDevice->dev, &ref_skb, pTD->pTDInfo->skb);
+#endif
+                // Update the statistics based on the Transmit status
+                // now, we DO'NT check TSR0_CDH
+
+                STAvUpdateTDStatCounter(&pDevice->scStatistic,
+                        byTsr0, byTsr1,
+                        (PBYTE)(pTD->pTDInfo->buf + uFIFOHeaderSize),
+                        uFrameSize, uIdx);
+
+
+                BSSvUpdateNodeTxCounter(pDevice,
+                         byTsr0, byTsr1,
+                         (PBYTE)(pTD->pTDInfo->buf),
+                         uFIFOHeaderSize
+                         );
+
+                if (BITbIsBitOff(byTsr1, TSR1_TERR)) {
+                    if (byTsr0 != 0) {
+                        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" Tx[%d] OK but has error. tsr1[%02X] tsr0[%02X].\n",
+                           (INT)uIdx, byTsr1, byTsr0);
+                    }
+                    if ((pTxBufHead->wFragCtl & FRAGCTL_ENDFRAG) != FRAGCTL_NONFRAG) {
+                        pDevice->s802_11Counter.TransmittedFragmentCount ++;
+                    }
+                    pStats->tx_packets++;
+#ifdef PRIVATE_OBJ
+                    pStats->tx_bytes += *(ref_skb.len);
+#else
+                    pStats->tx_bytes += pTD->pTDInfo->skb->len;
+#endif
+                }
+                else {
+                     DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" Tx[%d] dropped & tsr1[%02X] tsr0[%02X].\n",
+                           (INT)uIdx, byTsr1, byTsr0);
+                    pStats->tx_errors++;
+                    pStats->tx_dropped++;
+                }
+            }
+
+            if ((pTD->pTDInfo->byFlags & TD_FLAGS_PRIV_SKB) != 0) {
+                if (pDevice->bEnableHostapd) {
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "tx call back netif.. \n");
+#ifdef PRIVATE_OBJ
+                    ref_skb_remap(pDevice->apdev, &(ref_skb), pTD->pTDInfo->skb);
+	                ref_skb.mac.raw = ref_skb.data;
+	                *(ref_skb.pkt_type) = PACKET_OTHERHOST;
+    	            //*(ref_skb.protocol) = htons(ETH_P_802_2);
+	                memset(ref_skb.cb, 0, sizeof(ref_skb.cb));
+	                netif_rx(ref_skb.skb);
+#else
+                    skb = pTD->pTDInfo->skb;
+	                skb->dev = pDevice->apdev;
+			        skb->mac_header = skb->data;
+	                skb->pkt_type = PACKET_OTHERHOST;
+    	            //skb->protocol = htons(ETH_P_802_2);
+	                memset(skb->cb, 0, sizeof(skb->cb));
+	                netif_rx(skb);
+#endif
+	            }
+            }
+
+            if (BITbIsBitOn(byTsr1, TSR1_TERR)) {
+            if ((pTD->pTDInfo->byFlags & TD_FLAGS_PRIV_SKB) != 0) {
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" Tx[%d] fail has error. tsr1[%02X] tsr0[%02X].\n",
+                          (INT)uIdx, byTsr1, byTsr0);
+            }
+
+//                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" Tx[%d] fail has error. tsr1[%02X] tsr0[%02X].\n",
+//                          (INT)uIdx, byTsr1, byTsr0);
+
+                if ((pMgmt->eCurrMode == WMAC_MODE_ESS_AP) &&
+                    (pTD->pTDInfo->byFlags & TD_FLAGS_NETIF_SKB)) {
+                    WORD    wAID;
+                    BYTE    byMask[8] = {1, 2, 4, 8, 0x10, 0x20, 0x40, 0x80};
+
+                    skb = pTD->pTDInfo->skb;
+                    if (BSSDBbIsSTAInNodeDB(pMgmt, (PBYTE)(skb->data), &uNodeIndex)) {
+                        if (pMgmt->sNodeDBTable[uNodeIndex].bPSEnable) {
+                            skb_queue_tail(&pMgmt->sNodeDBTable[uNodeIndex].sTxPSQueue, skb);
+                            pMgmt->sNodeDBTable[uNodeIndex].wEnQueueCnt++;
+                            // set tx map
+                            wAID = pMgmt->sNodeDBTable[uNodeIndex].wAID;
+                            pMgmt->abyPSTxMap[wAID >> 3] |=  byMask[wAID & 7];
+                            pTD->pTDInfo->byFlags &= ~(TD_FLAGS_NETIF_SKB);
+                            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "tx_srv:tx fail re-queue sta index= %d, QueCnt= %d\n"
+                                    ,(INT)uNodeIndex, pMgmt->sNodeDBTable[uNodeIndex].wEnQueueCnt);
+                            pStats->tx_errors--;
+                            pStats->tx_dropped--;
+                        }
+                    }
+                }
+            }
+            device_free_tx_buf(pDevice,pTD);
+            pDevice->iTDUsed[uIdx]--;
+        }
+    }
+
+
+    if (uIdx == TYPE_AC0DMA) {
+        // RESERV_AC0DMA reserved for relay
+
+        if (AVAIL_TD(pDevice, uIdx) < RESERV_AC0DMA) {
+            bFull = TRUE;
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " AC0DMA is Full = %d\n", pDevice->iTDUsed[uIdx]);
+        }
+        if (netif_queue_stopped(pDevice->dev) && (bFull==FALSE)){
+            netif_wake_queue(pDevice->dev);
+        }
+    }
+
+
+    pDevice->apTailTD[uIdx] = pTD;
+
+    return works;
+}
+
+
+static void device_error(PSDevice pDevice, WORD status) {
+
+    if (status & ISR_FETALERR) {
+        DEVICE_PRT(MSG_LEVEL_ERR, KERN_ERR
+            "%s: Hardware fatal error.\n",
+            pDevice->dev->name);
+        netif_stop_queue(pDevice->dev);
+        del_timer(&pDevice->sTimerCommand);
+        del_timer(&(pDevice->pMgmt->sTimerSecondCallback));
+        pDevice->bCmdRunning = FALSE;
+        MACbShutdown(pDevice->PortOffset);
+        return;
+    }
+
+}
+
+static void device_free_tx_buf(PSDevice pDevice, PSTxDesc pDesc) {
+    PDEVICE_TD_INFO  pTDInfo=pDesc->pTDInfo;
+    struct sk_buff* skb=pTDInfo->skb;
+
+    // pre-allocated buf_dma can't be unmapped.
+    if (pTDInfo->skb_dma && (pTDInfo->skb_dma != pTDInfo->buf_dma)) {
+        pci_unmap_single(pDevice->pcid,pTDInfo->skb_dma,skb->len,
+              PCI_DMA_TODEVICE);
+    }
+
+    if ((pTDInfo->byFlags & TD_FLAGS_NETIF_SKB) != 0)
+        dev_kfree_skb_irq(skb);
+
+    pTDInfo->skb_dma = 0;
+    pTDInfo->skb = 0;
+    pTDInfo->byFlags = 0;
+}
+
+
+
+//PLICE_DEBUG ->
+VOID	InitRxManagementQueue(PSDevice  pDevice)
+{
+	pDevice->rxManeQueue.packet_num = 0;
+	pDevice->rxManeQueue.head = pDevice->rxManeQueue.tail = 0;
+}
+//PLICE_DEBUG<-
+
+
+
+
+
+//PLICE_DEBUG ->
+INT MlmeThread(
+     void * Context)
+{
+	PSDevice	pDevice =  (PSDevice) Context;
+	PSRxMgmtPacket			pRxMgmtPacket;
+	// int i ;
+	//complete(&pDevice->notify);
+//printk("Enter MngWorkItem,Queue packet num is %d\n",pDevice->rxManeQueue.packet_num);
+
+	//printk("Enter MlmeThread,packet _num is %d\n",pDevice->rxManeQueue.packet_num);
+	//i = 0;
+#if 1
+	while (1)
+	{
+
+	//printk("DDDD\n");
+	//down(&pDevice->mlme_semaphore);
+        // pRxMgmtPacket =  DeQueue(pDevice);
+#if 1
+		spin_lock_irq(&pDevice->lock);
+		 while(pDevice->rxManeQueue.packet_num != 0)
+	 	{
+			 pRxMgmtPacket =  DeQueue(pDevice);
+        			//pDevice;
+        			//DequeueManageObject(pDevice->FirstRecvMngList, pDevice->LastRecvMngList);
+			vMgrRxManagePacket(pDevice, pDevice->pMgmt, pRxMgmtPacket);
+			//printk("packet_num is %d\n",pDevice->rxManeQueue.packet_num);
+
+		 }
+		spin_unlock_irq(&pDevice->lock);
+		if (mlme_kill == 0)
+		break;
+		//udelay(200);
+#endif
+	//printk("Before schedule thread jiffies is %x\n",jiffies);
+	schedule();
+	//printk("after schedule thread jiffies is %x\n",jiffies);
+	if (mlme_kill == 0)
+		break;
+	//printk("i is %d\n",i);
+	}
+
+#endif
+	return 0;
+
+}
+
+
+#ifdef PRIVATE_OBJ
+
+int __device_open(HANDLE pExDevice) {
+    PSDevice_info pDevice_info = (PSDevice_info)pExDevice;
+    PSDevice    pDevice = (PSDevice)(pDevice_info->pWDevice);
+
+#else
+
+static int  device_open(struct net_device *dev) {
+    PSDevice    pDevice=(PSDevice) netdev_priv(dev);
+    int i;
+#endif
+    pDevice->rx_buf_sz = PKT_BUF_SZ;
+    if (!device_init_rings(pDevice)) {
+        return -ENOMEM;
+    }
+//2008-5-13 <add> by chester
+#ifndef PRIVATE_OBJ
+    i=request_irq(pDevice->pcid->irq, &device_intr, IRQF_SHARED, dev->name, dev);
+    if (i)
+        return i;
+#endif
+	//printk("DEBUG1\n");
+#ifdef WPA_SM_Transtatus
+     extern SWPAResult wpa_Result;
+     memset(wpa_Result.ifname,0,sizeof(wpa_Result.ifname));
+     wpa_Result.proto = 0;
+     wpa_Result.key_mgmt = 0;
+     wpa_Result.eap_type = 0;
+     wpa_Result.authenticated = FALSE;
+     pDevice->fWPA_Authened = FALSE;
+#endif
+DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "call device init rd0 ring\n");
+device_init_rd0_ring(pDevice);
+    device_init_rd1_ring(pDevice);
+    device_init_defrag_cb(pDevice);
+    device_init_td0_ring(pDevice);
+    device_init_td1_ring(pDevice);
+//    VNTWIFIvSet11h(pDevice->pMgmt, pDevice->b11hEnable);
+
+
+    if (pDevice->bDiversityRegCtlON) {
+        device_init_diversity_timer(pDevice);
+    }
+    vMgrObjectInit(pDevice);
+    vMgrTimerInit(pDevice);
+
+//PLICE_DEBUG->
+#ifdef	TASK_LET
+	tasklet_init (&pDevice->RxMngWorkItem,(void *)MngWorkItem,(unsigned long )pDevice);
+#endif
+#ifdef	THREAD
+	InitRxManagementQueue(pDevice);
+	mlme_kill = 0;
+	mlme_task = kthread_run(MlmeThread,(void *) pDevice, "MLME");
+	if (IS_ERR(mlme_task)) {
+		printk("thread create fail\n");
+		return -1;
+	}
+
+	mlme_kill = 1;
+#endif
+
+
+
+#if 0
+	pDevice->MLMEThr_pid = kernel_thread(MlmeThread, pDevice, CLONE_VM);
+	if (pDevice->MLMEThr_pid <0 )
+	{
+		printk("unable start thread MlmeThread\n");
+		return -1;
+	}
+#endif
+
+	//printk("thread id is %d\n",pDevice->MLMEThr_pid);
+	//printk("Create thread time is %x\n",jiffies);
+	//wait_for_completion(&pDevice->notify);
+
+
+
+
+  // if (( SROMbyReadEmbedded(pDevice->PortOffset, EEP_OFS_RADIOCTL)&0x06)==0x04)
+    //    return -ENOMEM;
+DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "call device_init_registers\n");
+	device_init_registers(pDevice, DEVICE_INIT_COLD);
+    MACvReadEtherAddress(pDevice->PortOffset, pDevice->abyCurrentNetAddr);
+    memcpy(pDevice->pMgmt->abyMACAddr, pDevice->abyCurrentNetAddr, U_ETHER_ADDR_LEN);
+#ifdef PRIVATE_OBJ
+    __device_set_multi(pExDevice);
+#else
+    device_set_multi(pDevice->dev);
+#endif
+
+    // Init for Key Management
+    KeyvInitTable(&pDevice->sKey, pDevice->PortOffset);
+    add_timer(&(pDevice->pMgmt->sTimerSecondCallback));
+
+	#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+	/*
+     pDevice->bwextstep0 = FALSE;
+     pDevice->bwextstep1 = FALSE;
+     pDevice->bwextstep2 = FALSE;
+     pDevice->bwextstep3 = FALSE;
+     */
+       pDevice->bwextcount=0;
+     pDevice->bWPASuppWextEnabled = FALSE;
+#endif
+    pDevice->byReAssocCount = 0;
+   pDevice->bWPADEVUp = FALSE;
+    // Patch: if WEP key already set by iwconfig but device not yet open
+    if ((pDevice->bEncryptionEnable == TRUE) && (pDevice->bTransmitKey == TRUE)) {
+        KeybSetDefaultKey(&(pDevice->sKey),
+                            (DWORD)(pDevice->byKeyIndex | (1 << 31)),
+                            pDevice->uKeyLength,
+                            NULL,
+                            pDevice->abyKey,
+                            KEY_CTL_WEP,
+                            pDevice->PortOffset,
+                            pDevice->byLocalID
+                          );
+         pDevice->eEncryptionStatus = Ndis802_11Encryption1Enabled;
+    }
+
+//printk("DEBUG2\n");
+
+
+DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "call MACvIntEnable\n");
+	MACvIntEnable(pDevice->PortOffset, IMR_MASK_VALUE);
+
+    if (pDevice->pMgmt->eConfigMode == WMAC_CONFIG_AP) {
+        bScheduleCommand((HANDLE)pDevice, WLAN_CMD_RUN_AP, NULL);
+	}
+	else {
+        bScheduleCommand((HANDLE)pDevice, WLAN_CMD_BSSID_SCAN, NULL);
+        bScheduleCommand((HANDLE)pDevice, WLAN_CMD_SSID, NULL);
+    }
+    pDevice->flags |=DEVICE_FLAGS_OPENED;
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "device_open success.. \n");
+    return 0;
+}
+
+
+#ifdef PRIVATE_OBJ
+
+int  __device_close(HANDLE pExDevice) {
+    PSDevice_info pDevice_info = (PSDevice_info)pExDevice;
+    struct net_device *dev = pDevice_info->dev;
+    PSDevice    pDevice = (PSDevice)(pDevice_info->pWDevice);
+
+#else
+static int  device_close(struct net_device *dev) {
+    PSDevice  pDevice=(PSDevice) netdev_priv(dev);
+#endif
+    PSMgmtObject     pMgmt = pDevice->pMgmt;
+ //PLICE_DEBUG->
+#ifdef	THREAD
+	mlme_kill = 0;
+#endif
+//PLICE_DEBUG<-
+//2007-1121-02<Add>by EinsnLiu
+    if (pDevice->bLinkPass) {
+	bScheduleCommand((HANDLE)pDevice, WLAN_CMD_DISASSOCIATE, NULL);
+        mdelay(30);
+    }
+#ifdef TxInSleep
+    del_timer(&pDevice->sTimerTxData);
+#endif
+    del_timer(&pDevice->sTimerCommand);
+    del_timer(&pMgmt->sTimerSecondCallback);
+    if (pDevice->bDiversityRegCtlON) {
+        del_timer(&pDevice->TimerSQ3Tmax1);
+        del_timer(&pDevice->TimerSQ3Tmax2);
+        del_timer(&pDevice->TimerSQ3Tmax3);
+    }
+
+#ifdef	TASK_LET
+	tasklet_kill(&pDevice->RxMngWorkItem);
+#endif
+     netif_stop_queue(dev);
+    pDevice->bCmdRunning = FALSE;
+    MACbShutdown(pDevice->PortOffset);
+    MACbSoftwareReset(pDevice->PortOffset);
+    CARDbRadioPowerOff(pDevice);
+
+    pDevice->bLinkPass = FALSE;
+    memset(pMgmt->abyCurrBSSID, 0, 6);
+    pMgmt->eCurrState = WMAC_STATE_IDLE;
+    device_free_td0_ring(pDevice);
+    device_free_td1_ring(pDevice);
+    device_free_rd0_ring(pDevice);
+    device_free_rd1_ring(pDevice);
+    device_free_frag_buf(pDevice);
+    device_free_rings(pDevice);
+    BSSvClearNodeDBTable(pDevice, 0);
+    free_irq(dev->irq, dev);
+    pDevice->flags &=(~DEVICE_FLAGS_OPENED);
+	//2008-0714-01<Add>by chester
+device_release_WPADEV(pDevice);
+//PLICE_DEBUG->
+	//tasklet_kill(&pDevice->RxMngWorkItem);
+//PLICE_DEBUG<-
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "device_close.. \n");
+    return 0;
+}
+
+#ifdef PRIVATE_OBJ
+
+int  __device_dma0_tx_80211(HANDLE pExDevice, struct sk_buff *skb) {
+    PSDevice_info pDevice_info = (PSDevice_info)pExDevice;
+    PSDevice    pDevice = (PSDevice)(pDevice_info->pWDevice);
+    ref_sk_buff     ref_skb;
+
+#else
+
+
+static int device_dma0_tx_80211(struct sk_buff *skb, struct net_device *dev) {
+    PSDevice        pDevice=netdev_priv(dev);
+#endif
+    PBYTE           pbMPDU;
+    UINT            cbMPDULen = 0;
+
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "device_dma0_tx_80211\n");
+    spin_lock_irq(&pDevice->lock);
+
+    if (AVAIL_TD(pDevice, TYPE_TXDMA0) <= 0) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "device_dma0_tx_80211, td0 <=0\n");
+        dev_kfree_skb_irq(skb);
+        spin_unlock_irq(&pDevice->lock);
+        return 0;
+    }
+
+    if (pDevice->bStopTx0Pkt == TRUE) {
+        dev_kfree_skb_irq(skb);
+        spin_unlock_irq(&pDevice->lock);
+        return 0;
+    };
+
+#ifdef PRIVATE_OBJ
+    ref_skb_remap(pDevice->dev, &ref_skb, skb);
+    cbMPDULen = *(ref_skb.len);
+    pbMPDU = ref_skb.data;
+#else
+    cbMPDULen = skb->len;
+    pbMPDU = skb->data;
+#endif
+
+    vDMA0_tx_80211(pDevice, skb, pbMPDU, cbMPDULen);
+
+    spin_unlock_irq(&pDevice->lock);
+
+    return 0;
+
+}
+
+
+
+BOOL device_dma0_xmit(PSDevice pDevice, struct sk_buff *skb, UINT uNodeIndex) {
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+    PSTxDesc        pHeadTD, pLastTD;
+    UINT            cbFrameBodySize;
+    UINT            uMACfragNum;
+    BYTE            byPktTyp;
+    BOOL            bNeedEncryption = FALSE;
+    PSKeyItem       pTransmitKey = NULL;
+    UINT            cbHeaderSize;
+    UINT            ii;
+    SKeyItem        STempKey;
+//    BYTE            byKeyIndex = 0;
+#ifdef PRIVATE_OBJ
+    ref_sk_buff     ref_skb;
+#endif
+
+
+    if (pDevice->bStopTx0Pkt == TRUE) {
+        dev_kfree_skb_irq(skb);
+        return FALSE;
+    };
+
+    if (AVAIL_TD(pDevice, TYPE_TXDMA0) <= 0) {
+        dev_kfree_skb_irq(skb);
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "device_dma0_xmit, td0 <=0\n");
+        return FALSE;
+    }
+
+    if (pMgmt->eCurrMode == WMAC_MODE_ESS_AP) {
+        if (pDevice->uAssocCount == 0) {
+            dev_kfree_skb_irq(skb);
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "device_dma0_xmit, assocCount = 0\n");
+            return FALSE;
+        }
+    }
+
+#ifdef PRIVATE_OBJ
+    ref_skb_remap(pDevice->dev, &(ref_skb), skb);
+#endif
+    pHeadTD = pDevice->apCurrTD[TYPE_TXDMA0];
+
+    pHeadTD->m_td1TD1.byTCR = (TCR_EDP|TCR_STP);
+
+#ifdef PRIVATE_OBJ
+    memcpy(pDevice->sTxEthHeader.abyDstAddr, (PBYTE)(ref_skb.data), U_HEADER_LEN);
+    cbFrameBodySize = *(ref_skb.len) - U_HEADER_LEN;
+
+#else
+    memcpy(pDevice->sTxEthHeader.abyDstAddr, (PBYTE)(skb->data), U_HEADER_LEN);
+    cbFrameBodySize = skb->len - U_HEADER_LEN;
+#endif
+
+    // 802.1H
+    if (ntohs(pDevice->sTxEthHeader.wType) > MAX_DATA_LEN) {
+        cbFrameBodySize += 8;
+    }
+    uMACfragNum = cbGetFragCount(pDevice, pTransmitKey, cbFrameBodySize, &pDevice->sTxEthHeader);
+
+    if ( uMACfragNum > AVAIL_TD(pDevice, TYPE_TXDMA0)) {
+        dev_kfree_skb_irq(skb);
+        return FALSE;
+    }
+    byPktTyp = (BYTE)pDevice->byPacketType;
+
+
+    if (pDevice->bFixRate) {
+        if (pDevice->eCurrentPHYType == PHY_TYPE_11B) {
+            if (pDevice->uConnectionRate >= RATE_11M) {
+                pDevice->wCurrentRate = RATE_11M;
+            } else {
+                pDevice->wCurrentRate = (WORD)pDevice->uConnectionRate;
+            }
+        } else {
+            if (pDevice->uConnectionRate >= RATE_54M)
+                pDevice->wCurrentRate = RATE_54M;
+            else
+                pDevice->wCurrentRate = (WORD)pDevice->uConnectionRate;
+        }
+    }
+    else {
+        pDevice->wCurrentRate = pDevice->pMgmt->sNodeDBTable[uNodeIndex].wTxDataRate;
+    }
+
+    //preamble type
+    if (pMgmt->sNodeDBTable[uNodeIndex].bShortPreamble) {
+        pDevice->byPreambleType = pDevice->byShortPreamble;
+    }
+    else {
+        pDevice->byPreambleType = PREAMBLE_LONG;
+    }
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "dma0: pDevice->wCurrentRate = %d \n", pDevice->wCurrentRate);
+
+
+    if (pDevice->wCurrentRate <= RATE_11M) {
+        byPktTyp = PK_TYPE_11B;
+    } else if (pDevice->eCurrentPHYType == PHY_TYPE_11A) {
+        byPktTyp = PK_TYPE_11A;
+    } else {
+        if (pDevice->bProtectMode == TRUE) {
+            byPktTyp = PK_TYPE_11GB;
+        } else {
+            byPktTyp = PK_TYPE_11GA;
+        }
+    }
+
+    if (pDevice->bEncryptionEnable == TRUE)
+        bNeedEncryption = TRUE;
+
+    if (pDevice->bEnableHostWEP) {
+        pTransmitKey = &STempKey;
+        pTransmitKey->byCipherSuite = pMgmt->sNodeDBTable[uNodeIndex].byCipherSuite;
+        pTransmitKey->dwKeyIndex = pMgmt->sNodeDBTable[uNodeIndex].dwKeyIndex;
+        pTransmitKey->uKeyLength = pMgmt->sNodeDBTable[uNodeIndex].uWepKeyLength;
+        pTransmitKey->dwTSC47_16 = pMgmt->sNodeDBTable[uNodeIndex].dwTSC47_16;
+        pTransmitKey->wTSC15_0 = pMgmt->sNodeDBTable[uNodeIndex].wTSC15_0;
+        memcpy(pTransmitKey->abyKey,
+            &pMgmt->sNodeDBTable[uNodeIndex].abyWepKey[0],
+            pTransmitKey->uKeyLength
+            );
+    }
+    vGenerateFIFOHeader(pDevice, byPktTyp, pDevice->pbyTmpBuff, bNeedEncryption,
+                        cbFrameBodySize, TYPE_TXDMA0, pHeadTD,
+                        &pDevice->sTxEthHeader, (PBYTE)skb->data, pTransmitKey, uNodeIndex,
+                        &uMACfragNum,
+                        &cbHeaderSize
+                        );
+
+    if (MACbIsRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_PS)) {
+        // Disable PS
+        MACbPSWakeup(pDevice->PortOffset);
+    }
+
+    pDevice->bPWBitOn = FALSE;
+
+    pLastTD = pHeadTD;
+    for (ii = 0; ii < uMACfragNum; ii++) {
+        // Poll Transmit the adapter
+        wmb();
+        pHeadTD->m_td0TD0.f1Owner=OWNED_BY_NIC;
+        wmb();
+        if (ii == (uMACfragNum - 1))
+            pLastTD = pHeadTD;
+        pHeadTD = pHeadTD->next;
+    }
+
+    // Save the information needed by the tx interrupt handler
+    // to complete the Send request
+    pLastTD->pTDInfo->skb = skb;
+    pLastTD->pTDInfo->byFlags = 0;
+    pLastTD->pTDInfo->byFlags |= TD_FLAGS_NETIF_SKB;
+
+    pDevice->apCurrTD[TYPE_TXDMA0] = pHeadTD;
+
+    MACvTransmit0(pDevice->PortOffset);
+
+
+    return TRUE;
+}
+
+//TYPE_AC0DMA data tx
+#ifdef PRIVATE_OBJ
+
+int  __device_xmit(HANDLE pExDevice, struct sk_buff *skb) {
+    PSDevice_info pDevice_info = (PSDevice_info)pExDevice;
+    PSDevice    pDevice = (PSDevice)(pDevice_info->pWDevice);
+    struct net_device *dev = pDevice_info->dev;
+    ref_sk_buff     ref_skb;
+
+#else
+static int  device_xmit(struct sk_buff *skb, struct net_device *dev) {
+    PSDevice pDevice=netdev_priv(dev);
+
+#endif
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+    PSTxDesc        pHeadTD, pLastTD;
+    UINT            uNodeIndex = 0;
+    BYTE            byMask[8] = {1, 2, 4, 8, 0x10, 0x20, 0x40, 0x80};
+    WORD            wAID;
+    UINT            uMACfragNum = 1;
+    UINT            cbFrameBodySize;
+    BYTE            byPktTyp;
+    UINT            cbHeaderSize;
+    BOOL            bNeedEncryption = FALSE;
+    PSKeyItem       pTransmitKey = NULL;
+    SKeyItem        STempKey;
+    UINT            ii;
+    BOOL            bTKIP_UseGTK = FALSE;
+    BOOL            bNeedDeAuth = FALSE;
+    PBYTE           pbyBSSID;
+    BOOL            bNodeExist = FALSE;
+
+
+
+    spin_lock_irq(&pDevice->lock);
+    if (pDevice->bLinkPass == FALSE) {
+        dev_kfree_skb_irq(skb);
+        spin_unlock_irq(&pDevice->lock);
+        return 0;
+    }
+
+    if (pDevice->bStopDataPkt) {
+        dev_kfree_skb_irq(skb);
+        spin_unlock_irq(&pDevice->lock);
+        return 0;
+    }
+
+#ifdef PRIVATE_OBJ
+    ref_skb_remap(pDevice->dev, &ref_skb, skb);
+#endif
+
+    if (pMgmt->eCurrMode == WMAC_MODE_ESS_AP) {
+        if (pDevice->uAssocCount == 0) {
+            dev_kfree_skb_irq(skb);
+            spin_unlock_irq(&pDevice->lock);
+            return 0;
+        }
+#ifdef PRIVATE_OBJ
+        if (IS_MULTICAST_ADDRESS((PBYTE)(ref_skb.data))) {
+#else
+        if (IS_MULTICAST_ADDRESS((PBYTE)(skb->data))) {
+#endif
+            uNodeIndex = 0;
+            bNodeExist = TRUE;
+            if (pMgmt->sNodeDBTable[0].bPSEnable) {
+#ifdef PRIVATE_OBJ
+                skb_queue_tail(&(pMgmt->sNodeDBTable[0].sTxPSQueue), ref_skb.skb);
+#else
+                skb_queue_tail(&(pMgmt->sNodeDBTable[0].sTxPSQueue), skb);
+#endif
+                pMgmt->sNodeDBTable[0].wEnQueueCnt++;
+                // set tx map
+                pMgmt->abyPSTxMap[0] |= byMask[0];
+                spin_unlock_irq(&pDevice->lock);
+                return 0;
+            }
+}else {
+#ifdef PRIVATE_OBJ
+            if (BSSDBbIsSTAInNodeDB(pMgmt, (PBYTE)(ref_skb.data), &uNodeIndex)) {
+#else
+            if (BSSDBbIsSTAInNodeDB(pMgmt, (PBYTE)(skb->data), &uNodeIndex)) {
+#endif
+                if (pMgmt->sNodeDBTable[uNodeIndex].bPSEnable) {
+#ifdef PRIVATE_OBJ
+                    skb_queue_tail(&pMgmt->sNodeDBTable[uNodeIndex].sTxPSQueue, ref_skb.skb);
+#else
+                    skb_queue_tail(&pMgmt->sNodeDBTable[uNodeIndex].sTxPSQueue, skb);
+#endif
+                    pMgmt->sNodeDBTable[uNodeIndex].wEnQueueCnt++;
+                    // set tx map
+                    wAID = pMgmt->sNodeDBTable[uNodeIndex].wAID;
+                    pMgmt->abyPSTxMap[wAID >> 3] |=  byMask[wAID & 7];
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Set:pMgmt->abyPSTxMap[%d]= %d\n",
+                             (wAID >> 3), pMgmt->abyPSTxMap[wAID >> 3]);
+                    spin_unlock_irq(&pDevice->lock);
+                    return 0;
+                }
+
+                if (pMgmt->sNodeDBTable[uNodeIndex].bShortPreamble) {
+                    pDevice->byPreambleType = pDevice->byShortPreamble;
+
+                }else {
+                    pDevice->byPreambleType = PREAMBLE_LONG;
+                }
+                bNodeExist = TRUE;
+
+            }
+        }
+
+        if (bNodeExist == FALSE) {
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_DEBUG"Unknown STA not found in node DB \n");
+            dev_kfree_skb_irq(skb);
+            spin_unlock_irq(&pDevice->lock);
+            return 0;
+        }
+    }
+
+    pHeadTD = pDevice->apCurrTD[TYPE_AC0DMA];
+
+    pHeadTD->m_td1TD1.byTCR = (TCR_EDP|TCR_STP);
+
+
+#ifdef PRIVATE_OBJ
+    memcpy(pDevice->sTxEthHeader.abyDstAddr, (PBYTE)(ref_skb.data), U_HEADER_LEN);
+    cbFrameBodySize = *(ref_skb.len) - U_HEADER_LEN;
+#else
+    memcpy(pDevice->sTxEthHeader.abyDstAddr, (PBYTE)(skb->data), U_HEADER_LEN);
+    cbFrameBodySize = skb->len - U_HEADER_LEN;
+#endif
+    // 802.1H
+    if (ntohs(pDevice->sTxEthHeader.wType) > MAX_DATA_LEN) {
+        cbFrameBodySize += 8;
+    }
+
+
+    if (pDevice->bEncryptionEnable == TRUE) {
+        bNeedEncryption = TRUE;
+        // get Transmit key
+        do {
+            if ((pDevice->pMgmt->eCurrMode == WMAC_MODE_ESS_STA) &&
+                (pDevice->pMgmt->eCurrState == WMAC_STATE_ASSOC)) {
+                pbyBSSID = pDevice->abyBSSID;
+                // get pairwise key
+                if (KeybGetTransmitKey(&(pDevice->sKey), pbyBSSID, PAIRWISE_KEY, &pTransmitKey) == FALSE) {
+                    // get group key
+                    if(KeybGetTransmitKey(&(pDevice->sKey), pbyBSSID, GROUP_KEY, &pTransmitKey) == TRUE) {
+                        bTKIP_UseGTK = TRUE;
+                        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_DEBUG"Get GTK.\n");
+                        break;
+                    }
+                } else {
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_DEBUG"Get PTK.\n");
+                    break;
+                }
+            }else if (pDevice->pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) {
+
+                pbyBSSID = pDevice->sTxEthHeader.abyDstAddr;  //TO_DS = 0 and FROM_DS = 0 --> 802.11 MAC Address1
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_DEBUG"IBSS Serach Key: \n");
+                for (ii = 0; ii< 6; ii++)
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_DEBUG"%x \n", *(pbyBSSID+ii));
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_DEBUG"\n");
+
+                // get pairwise key
+                if(KeybGetTransmitKey(&(pDevice->sKey), pbyBSSID, PAIRWISE_KEY, &pTransmitKey) == TRUE)
+                    break;
+            }
+            // get group key
+            pbyBSSID = pDevice->abyBroadcastAddr;
+            if(KeybGetTransmitKey(&(pDevice->sKey), pbyBSSID, GROUP_KEY, &pTransmitKey) == FALSE) {
+                pTransmitKey = NULL;
+                if (pDevice->pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) {
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_DEBUG"IBSS and KEY is NULL. [%d]\n", pDevice->pMgmt->eCurrMode);
+                }
+                else
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_DEBUG"NOT IBSS and KEY is NULL. [%d]\n", pDevice->pMgmt->eCurrMode);
+            } else {
+                bTKIP_UseGTK = TRUE;
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_DEBUG"Get GTK.\n");
+            }
+        } while(FALSE);
+    }
+
+    if (pDevice->bEnableHostWEP) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_DEBUG"acdma0: STA index %d\n", uNodeIndex);
+        if (pDevice->bEncryptionEnable == TRUE) {
+            pTransmitKey = &STempKey;
+            pTransmitKey->byCipherSuite = pMgmt->sNodeDBTable[uNodeIndex].byCipherSuite;
+            pTransmitKey->dwKeyIndex = pMgmt->sNodeDBTable[uNodeIndex].dwKeyIndex;
+            pTransmitKey->uKeyLength = pMgmt->sNodeDBTable[uNodeIndex].uWepKeyLength;
+            pTransmitKey->dwTSC47_16 = pMgmt->sNodeDBTable[uNodeIndex].dwTSC47_16;
+            pTransmitKey->wTSC15_0 = pMgmt->sNodeDBTable[uNodeIndex].wTSC15_0;
+            memcpy(pTransmitKey->abyKey,
+                &pMgmt->sNodeDBTable[uNodeIndex].abyWepKey[0],
+                pTransmitKey->uKeyLength
+                );
+         }
+    }
+
+    uMACfragNum = cbGetFragCount(pDevice, pTransmitKey, cbFrameBodySize, &pDevice->sTxEthHeader);
+
+    if (uMACfragNum > AVAIL_TD(pDevice, TYPE_AC0DMA)) {
+        DEVICE_PRT(MSG_LEVEL_ERR, KERN_DEBUG "uMACfragNum > AVAIL_TD(TYPE_AC0DMA) = %d\n", uMACfragNum);
+        dev_kfree_skb_irq(skb);
+        spin_unlock_irq(&pDevice->lock);
+        return 0;
+    }
+
+    if (pTransmitKey != NULL) {
+        if ((pTransmitKey->byCipherSuite == KEY_CTL_WEP) &&
+            (pTransmitKey->uKeyLength == WLAN_WEP232_KEYLEN)) {
+            uMACfragNum = 1; //WEP256 doesn't support fragment
+        }
+    }
+
+    byPktTyp = (BYTE)pDevice->byPacketType;
+
+    if (pDevice->bFixRate) {
+#ifdef	PLICE_DEBUG
+	printk("Fix Rate: PhyType is %d,ConnectionRate is %d\n",pDevice->eCurrentPHYType,pDevice->uConnectionRate);
+#endif
+
+        if (pDevice->eCurrentPHYType == PHY_TYPE_11B) {
+            if (pDevice->uConnectionRate >= RATE_11M) {
+                pDevice->wCurrentRate = RATE_11M;
+            } else {
+                pDevice->wCurrentRate = (WORD)pDevice->uConnectionRate;
+            }
+        } else {
+            if ((pDevice->eCurrentPHYType == PHY_TYPE_11A) &&
+                (pDevice->uConnectionRate <= RATE_6M)) {
+                pDevice->wCurrentRate = RATE_6M;
+            } else {
+                if (pDevice->uConnectionRate >= RATE_54M)
+                    pDevice->wCurrentRate = RATE_54M;
+                else
+                    pDevice->wCurrentRate = (WORD)pDevice->uConnectionRate;
+
+            }
+        }
+        pDevice->byACKRate = (BYTE) pDevice->wCurrentRate;
+        pDevice->byTopCCKBasicRate = RATE_1M;
+        pDevice->byTopOFDMBasicRate = RATE_6M;
+    }
+    else {
+        //auto rate
+    if (pDevice->sTxEthHeader.wType == TYPE_PKT_802_1x) {
+            if (pDevice->eCurrentPHYType != PHY_TYPE_11A) {
+                pDevice->wCurrentRate = RATE_1M;
+                pDevice->byACKRate = RATE_1M;
+                pDevice->byTopCCKBasicRate = RATE_1M;
+                pDevice->byTopOFDMBasicRate = RATE_6M;
+            } else {
+                pDevice->wCurrentRate = RATE_6M;
+                pDevice->byACKRate = RATE_6M;
+                pDevice->byTopCCKBasicRate = RATE_1M;
+                pDevice->byTopOFDMBasicRate = RATE_6M;
+            }
+        }
+        else {
+		VNTWIFIvGetTxRate(  pDevice->pMgmt,
+                                pDevice->sTxEthHeader.abyDstAddr,
+                                &(pDevice->wCurrentRate),
+                                &(pDevice->byACKRate),
+                                &(pDevice->byTopCCKBasicRate),
+                                &(pDevice->byTopOFDMBasicRate));
+
+#if 0
+printk("auto rate:Rate : %d,AckRate:%d,TopCCKRate:%d,TopOFDMRate:%d\n",
+pDevice->wCurrentRate,pDevice->byACKRate,
+pDevice->byTopCCKBasicRate,pDevice->byTopOFDMBasicRate);
+
+#endif
+
+#if 0
+
+	pDevice->wCurrentRate = 11;
+	pDevice->byACKRate = 8;
+	pDevice->byTopCCKBasicRate = 3;
+	pDevice->byTopOFDMBasicRate = 8;
+#endif
+
+
+		}
+    }
+
+//    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "acdma0: pDevice->wCurrentRate = %d \n", pDevice->wCurrentRate);
+
+    if (pDevice->wCurrentRate <= RATE_11M) {
+        byPktTyp = PK_TYPE_11B;
+    } else if (pDevice->eCurrentPHYType == PHY_TYPE_11A) {
+        byPktTyp = PK_TYPE_11A;
+    } else {
+        if (pDevice->bProtectMode == TRUE) {
+            byPktTyp = PK_TYPE_11GB;
+        } else {
+            byPktTyp = PK_TYPE_11GA;
+        }
+    }
+
+//#ifdef	PLICE_DEBUG
+//	printk("FIX RATE:CurrentRate is %d");
+//#endif
+
+    if (bNeedEncryption == TRUE) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ntohs Pkt Type=%04x\n", ntohs(pDevice->sTxEthHeader.wType));
+        if ((pDevice->sTxEthHeader.wType) == TYPE_PKT_802_1x) {
+            bNeedEncryption = FALSE;
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Pkt Type=%04x\n", (pDevice->sTxEthHeader.wType));
+            if ((pDevice->pMgmt->eCurrMode == WMAC_MODE_ESS_STA) && (pDevice->pMgmt->eCurrState == WMAC_STATE_ASSOC)) {
+                if (pTransmitKey == NULL) {
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Don't Find TX KEY\n");
+                }
+                else {
+                    if (bTKIP_UseGTK == TRUE) {
+                        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"error: KEY is GTK!!~~\n");
+                    }
+                    else {
+                        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Find PTK [%lX]\n", pTransmitKey->dwKeyIndex);
+                        bNeedEncryption = TRUE;
+                    }
+                }
+            }
+
+            if (pDevice->byCntMeasure == 2) {
+                bNeedDeAuth = TRUE;
+                pDevice->s802_11Counter.TKIPCounterMeasuresInvoked++;
+            }
+
+            if (pDevice->bEnableHostWEP) {
+                if ((uNodeIndex != 0) &&
+                    (pMgmt->sNodeDBTable[uNodeIndex].dwKeyIndex & PAIRWISE_KEY)) {
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Find PTK [%lX]\n", pTransmitKey->dwKeyIndex);
+                    bNeedEncryption = TRUE;
+                 }
+             }
+        }
+        else {
+            if (pTransmitKey == NULL) {
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"return no tx key\n");
+                dev_kfree_skb_irq(skb);
+                spin_unlock_irq(&pDevice->lock);
+                return 0;
+            }
+        }
+    }
+
+
+#ifdef PRIVATE_OBJ
+    vGenerateFIFOHeader(pDevice, byPktTyp, pDevice->pbyTmpBuff, bNeedEncryption,
+                        cbFrameBodySize, TYPE_AC0DMA, pHeadTD,
+                        &pDevice->sTxEthHeader, (PBYTE)ref_skb.data, pTransmitKey, uNodeIndex,
+                        &uMACfragNum,
+                        &cbHeaderSize
+                        );
+#else
+#ifdef	PLICE_DEBUG
+	//if (skb->len == 98)
+	//{
+	//	printk("ping:len is %d\n");
+	//}
+#endif
+    vGenerateFIFOHeader(pDevice, byPktTyp, pDevice->pbyTmpBuff, bNeedEncryption,
+                        cbFrameBodySize, TYPE_AC0DMA, pHeadTD,
+                        &pDevice->sTxEthHeader, (PBYTE)skb->data, pTransmitKey, uNodeIndex,
+                        &uMACfragNum,
+                        &cbHeaderSize
+                        );
+#endif
+
+    if (MACbIsRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_PS)) {
+        // Disable PS
+        MACbPSWakeup(pDevice->PortOffset);
+    }
+    pDevice->bPWBitOn = FALSE;
+
+    pLastTD = pHeadTD;
+    for (ii = 0; ii < uMACfragNum; ii++) {
+        // Poll Transmit the adapter
+        wmb();
+        pHeadTD->m_td0TD0.f1Owner=OWNED_BY_NIC;
+        wmb();
+        if (ii == uMACfragNum - 1)
+            pLastTD = pHeadTD;
+        pHeadTD = pHeadTD->next;
+    }
+
+    // Save the information needed by the tx interrupt handler
+    // to complete the Send request
+#ifdef PRIVATE_OBJ
+    pLastTD->pTDInfo->skb = ref_skb.skb;
+#else
+    pLastTD->pTDInfo->skb = skb;
+#endif
+    pLastTD->pTDInfo->byFlags = 0;
+    pLastTD->pTDInfo->byFlags |= TD_FLAGS_NETIF_SKB;
+#ifdef TxInSleep
+  pDevice->nTxDataTimeCout=0; //2008-8-21 chester <add> for send null packet
+  #endif
+    if (AVAIL_TD(pDevice, TYPE_AC0DMA) <= 1) {
+        netif_stop_queue(dev);
+    }
+
+    pDevice->apCurrTD[TYPE_AC0DMA] = pHeadTD;
+//#ifdef	PLICE_DEBUG
+	if (pDevice->bFixRate)
+	{
+		printk("FixRate:Rate is %d,TxPower is %d\n",pDevice->wCurrentRate,pDevice->byCurPwr);
+	}
+	else
+	{
+		//printk("Auto Rate:Rate is %d,TxPower is %d\n",pDevice->wCurrentRate,pDevice->byCurPwr);
+	}
+//#endif
+
+{
+    BYTE  Protocol_Version;    //802.1x Authentication
+    BYTE  Packet_Type;           //802.1x Authentication
+    BYTE  Descriptor_type;
+    WORD Key_info;
+BOOL            bTxeapol_key = FALSE;
+    Protocol_Version = skb->data[U_HEADER_LEN];
+    Packet_Type = skb->data[U_HEADER_LEN+1];
+    Descriptor_type = skb->data[U_HEADER_LEN+1+1+2];
+    Key_info = (skb->data[U_HEADER_LEN+1+1+2+1] << 8)|(skb->data[U_HEADER_LEN+1+1+2+2]);
+   if (pDevice->sTxEthHeader.wType == TYPE_PKT_802_1x) {
+           if(((Protocol_Version==1) ||(Protocol_Version==2)) &&
+	        (Packet_Type==3)) {  //802.1x OR eapol-key challenge frame transfer
+                        bTxeapol_key = TRUE;
+		if((Descriptor_type==254)||(Descriptor_type==2)) {       //WPA or RSN
+                       if(!(Key_info & BIT3) &&   //group-key challenge
+			   (Key_info & BIT8) && (Key_info & BIT9)) {    //send 2/2 key
+			  pDevice->fWPA_Authened = TRUE;
+			  if(Descriptor_type==254)
+			      printk("WPA ");
+			  else
+			      printk("WPA2 ");
+			  printk("Authentication completed!!\n");
+                        }
+		 }
+             }
+   }
+}
+
+    MACvTransmitAC0(pDevice->PortOffset);
+//    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "acdma0:pDevice->apCurrTD= %p\n", pHeadTD);
+
+#ifdef PRIVATE_OBJ
+    ref_set_tx_jiffies(pDevice->dev);
+#else
+    dev->trans_start = jiffies;
+#endif
+
+    spin_unlock_irq(&pDevice->lock);
+    return 0;
+
+}
+
+#ifdef PRIVATE_OBJ
+
+int __device_intr(int irq, HANDLE pExDevice, struct pt_regs *regs) {
+    PSDevice_info pDevice_info = (PSDevice_info)pExDevice;
+    PSDevice    pDevice = (PSDevice)(pDevice_info->pWDevice);
+
+
+#else
+static  irqreturn_t  device_intr(int irq,  void *dev_instance) {
+    struct net_device* dev=dev_instance;
+    PSDevice     pDevice=(PSDevice) netdev_priv(dev);
+#endif
+
+    int             max_count=0;
+    DWORD           dwMIBCounter=0;
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+    BYTE            byOrgPageSel=0;
+    int             handled = 0;
+    BYTE            byData = 0;
+    int             ii= 0;
+//    BYTE            byRSSI;
+
+
+    MACvReadISR(pDevice->PortOffset, &pDevice->dwIsr);
+
+    if (pDevice->dwIsr == 0)
+        return IRQ_RETVAL(handled);
+
+    if (pDevice->dwIsr == 0xffffffff) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "dwIsr = 0xffff\n");
+        return IRQ_RETVAL(handled);
+    }
+    /*
+      // 2008-05-21 <mark> by Richardtai, we can't read RSSI here, because no packet bound with RSSI
+
+    	if ((BITbIsBitOn(pDevice->dwIsr, ISR_RXDMA0)) &&
+        (pDevice->byLocalID != REV_ID_VT3253_B0) &&
+        (pDevice->bBSSIDFilter == TRUE)) {
+        // update RSSI
+        //BBbReadEmbeded(pDevice->PortOffset, 0x3E, &byRSSI);
+        //pDevice->uCurrRSSI = byRSSI;
+    }
+    */
+
+    handled = 1;
+    MACvIntDisable(pDevice->PortOffset);
+    spin_lock_irq(&pDevice->lock);
+
+    //Make sure current page is 0
+    VNSvInPortB(pDevice->PortOffset + MAC_REG_PAGE1SEL, &byOrgPageSel);
+    if (byOrgPageSel == 1) {
+        MACvSelectPage0(pDevice->PortOffset);
+    }
+    else
+        byOrgPageSel = 0;
+
+    MACvReadMIBCounter(pDevice->PortOffset, &dwMIBCounter);
+    // TBD....
+    // Must do this after doing rx/tx, cause ISR bit is slow
+    // than RD/TD write back
+    // update ISR counter
+    STAvUpdate802_11Counter(&pDevice->s802_11Counter, &pDevice->scStatistic , dwMIBCounter);
+    while (pDevice->dwIsr != 0) {
+
+        STAvUpdateIsrStatCounter(&pDevice->scStatistic, pDevice->dwIsr);
+        MACvWriteISR(pDevice->PortOffset, pDevice->dwIsr);
+
+        if (pDevice->dwIsr & ISR_FETALERR){
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " ISR_FETALERR \n");
+            VNSvOutPortB(pDevice->PortOffset + MAC_REG_SOFTPWRCTL, 0);
+            VNSvOutPortW(pDevice->PortOffset + MAC_REG_SOFTPWRCTL, SOFTPWRCTL_SWPECTI);
+            device_error(pDevice, pDevice->dwIsr);
+        }
+
+        if (pDevice->byLocalID > REV_ID_VT3253_B1) {
+
+            if (BITbIsBitOn(pDevice->dwIsr, ISR_MEASURESTART)) {
+                // 802.11h measure start
+                pDevice->byOrgChannel = pDevice->byCurrentCh;
+                VNSvInPortB(pDevice->PortOffset + MAC_REG_RCR, &(pDevice->byOrgRCR));
+                VNSvOutPortB(pDevice->PortOffset + MAC_REG_RCR, (RCR_RXALLTYPE | RCR_UNICAST | RCR_BROADCAST | RCR_MULTICAST | RCR_WPAERR));
+                MACvSelectPage1(pDevice->PortOffset);
+                VNSvInPortD(pDevice->PortOffset + MAC_REG_MAR0, &(pDevice->dwOrgMAR0));
+                VNSvInPortD(pDevice->PortOffset + MAC_REG_MAR4, &(pDevice->dwOrgMAR4));
+                MACvSelectPage0(pDevice->PortOffset);
+               //xxxx
+               // WCMDbFlushCommandQueue(pDevice->pMgmt, TRUE);
+                if (CARDbSetChannel(pDevice, pDevice->pCurrMeasureEID->sReq.byChannel) == TRUE) {
+                    pDevice->bMeasureInProgress = TRUE;
+                    MACvSelectPage1(pDevice->PortOffset);
+                    MACvRegBitsOn(pDevice->PortOffset, MAC_REG_MSRCTL, MSRCTL_READY);
+                    MACvSelectPage0(pDevice->PortOffset);
+                    pDevice->byBasicMap = 0;
+                    pDevice->byCCAFraction = 0;
+                    for(ii=0;ii<8;ii++) {
+                        pDevice->dwRPIs[ii] = 0;
+                    }
+                } else {
+                    // can not measure because set channel fail
+                   // WCMDbResetCommandQueue(pDevice->pMgmt);
+                    // clear measure control
+                    MACvRegBitsOff(pDevice->PortOffset, MAC_REG_MSRCTL, MSRCTL_EN);
+                    s_vCompleteCurrentMeasure(pDevice, MEASURE_MODE_INCAPABLE);
+                    MACvSelectPage1(pDevice->PortOffset);
+                    MACvRegBitsOn(pDevice->PortOffset, MAC_REG_MSRCTL+1, MSRCTL1_TXPAUSE);
+                    MACvSelectPage0(pDevice->PortOffset);
+                }
+            }
+            if (BITbIsBitOn(pDevice->dwIsr, ISR_MEASUREEND)) {
+                // 802.11h measure end
+                pDevice->bMeasureInProgress = FALSE;
+                VNSvOutPortB(pDevice->PortOffset + MAC_REG_RCR, pDevice->byOrgRCR);
+                MACvSelectPage1(pDevice->PortOffset);
+                VNSvOutPortD(pDevice->PortOffset + MAC_REG_MAR0, pDevice->dwOrgMAR0);
+                VNSvOutPortD(pDevice->PortOffset + MAC_REG_MAR4, pDevice->dwOrgMAR4);
+                VNSvInPortB(pDevice->PortOffset + MAC_REG_MSRBBSTS, &byData);
+                pDevice->byBasicMap |= (byData >> 4);
+                VNSvInPortB(pDevice->PortOffset + MAC_REG_CCAFRACTION, &pDevice->byCCAFraction);
+                VNSvInPortB(pDevice->PortOffset + MAC_REG_MSRCTL, &byData);
+                // clear measure control
+                MACvRegBitsOff(pDevice->PortOffset, MAC_REG_MSRCTL, MSRCTL_EN);
+                MACvSelectPage0(pDevice->PortOffset);
+                CARDbSetChannel(pDevice, pDevice->byOrgChannel);
+                // WCMDbResetCommandQueue(pDevice->pMgmt);
+                MACvSelectPage1(pDevice->PortOffset);
+                MACvRegBitsOn(pDevice->PortOffset, MAC_REG_MSRCTL+1, MSRCTL1_TXPAUSE);
+                MACvSelectPage0(pDevice->PortOffset);
+                if (BITbIsBitOn(byData, MSRCTL_FINISH)) {
+                    // measure success
+                    s_vCompleteCurrentMeasure(pDevice, 0);
+                } else {
+                    // can not measure because not ready before end of measure time
+                    s_vCompleteCurrentMeasure(pDevice, MEASURE_MODE_LATE);
+                }
+            }
+            if (BITbIsBitOn(pDevice->dwIsr, ISR_QUIETSTART)) {
+                do {
+                    ;
+                } while (CARDbStartQuiet(pDevice) == FALSE);
+            }
+        }
+
+        if (pDevice->dwIsr & ISR_TBTT) {
+            if (pDevice->bEnableFirstQuiet == TRUE) {
+                pDevice->byQuietStartCount--;
+                if (pDevice->byQuietStartCount == 0) {
+                    pDevice->bEnableFirstQuiet = FALSE;
+                    MACvSelectPage1(pDevice->PortOffset);
+                    MACvRegBitsOn(pDevice->PortOffset, MAC_REG_MSRCTL, (MSRCTL_QUIETTXCHK | MSRCTL_QUIETEN));
+                    MACvSelectPage0(pDevice->PortOffset);
+                }
+            }
+            if ((pDevice->bChannelSwitch == TRUE) &&
+                (pDevice->eOPMode == OP_MODE_INFRASTRUCTURE)) {
+                pDevice->byChannelSwitchCount--;
+                if (pDevice->byChannelSwitchCount == 0) {
+                    pDevice->bChannelSwitch = FALSE;
+                    CARDbSetChannel(pDevice, pDevice->byNewChannel);
+                    VNTWIFIbChannelSwitch(pDevice->pMgmt, pDevice->byNewChannel);
+                    MACvSelectPage1(pDevice->PortOffset);
+                    MACvRegBitsOn(pDevice->PortOffset, MAC_REG_MSRCTL+1, MSRCTL1_TXPAUSE);
+                    MACvSelectPage0(pDevice->PortOffset);
+                    CARDbStartTxPacket(pDevice, PKT_TYPE_802_11_ALL);
+
+                }
+            }
+            if (pDevice->eOPMode == OP_MODE_ADHOC) {
+                //pDevice->bBeaconSent = FALSE;
+            } else {
+                if ((pDevice->bUpdateBBVGA) && (pDevice->bLinkPass == TRUE) && (pDevice->uCurrRSSI != 0)) {
+                    LONG            ldBm;
+
+                    RFvRSSITodBm(pDevice, (BYTE) pDevice->uCurrRSSI, &ldBm);
+                    for (ii=0;ii<BB_VGA_LEVEL;ii++) {
+                        if (ldBm < pDevice->ldBmThreshold[ii]) {
+                            pDevice->byBBVGANew = pDevice->abyBBVGA[ii];
+                            break;
+                        }
+                    }
+                    if (pDevice->byBBVGANew != pDevice->byBBVGACurrent) {
+                        pDevice->uBBVGADiffCount++;
+                        if (pDevice->uBBVGADiffCount == 1) {
+                            // first VGA diff gain
+                            BBvSetVGAGainOffset(pDevice, pDevice->byBBVGANew);
+                            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"First RSSI[%d] NewGain[%d] OldGain[%d] Count[%d]\n",
+                                            (int)ldBm, pDevice->byBBVGANew, pDevice->byBBVGACurrent, (int)pDevice->uBBVGADiffCount);
+                        }
+                        if (pDevice->uBBVGADiffCount >= BB_VGA_CHANGE_THRESHOLD) {
+                            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"RSSI[%d] NewGain[%d] OldGain[%d] Count[%d]\n",
+                                            (int)ldBm, pDevice->byBBVGANew, pDevice->byBBVGACurrent, (int)pDevice->uBBVGADiffCount);
+                            BBvSetVGAGainOffset(pDevice, pDevice->byBBVGANew);
+                        }
+                    } else {
+                        pDevice->uBBVGADiffCount = 1;
+                    }
+                }
+            }
+
+            pDevice->bBeaconSent = FALSE;
+            if (pDevice->bEnablePSMode) {
+                PSbIsNextTBTTWakeUp((HANDLE)pDevice);
+            };
+
+            if ((pDevice->eOPMode == OP_MODE_AP) ||
+                (pDevice->eOPMode == OP_MODE_ADHOC)) {
+
+                MACvOneShotTimer1MicroSec(pDevice->PortOffset,
+                        (pMgmt->wIBSSBeaconPeriod - MAKE_BEACON_RESERVED) << 10);
+            }
+
+            if (pDevice->eOPMode == OP_MODE_ADHOC && pDevice->pMgmt->wCurrATIMWindow > 0) {
+                // todo adhoc PS mode
+            };
+
+        }
+
+        if (pDevice->dwIsr & ISR_BNTX) {
+
+            if (pDevice->eOPMode == OP_MODE_ADHOC) {
+                pDevice->bIsBeaconBufReadySet = FALSE;
+                pDevice->cbBeaconBufReadySetCnt = 0;
+            };
+
+            if (pDevice->eOPMode == OP_MODE_AP) {
+                if(pMgmt->byDTIMCount > 0) {
+                   pMgmt->byDTIMCount --;
+                   pMgmt->sNodeDBTable[0].bRxPSPoll = FALSE;
+                }
+                else {
+                    if(pMgmt->byDTIMCount == 0) {
+                        // check if mutltcast tx bufferring
+                        pMgmt->byDTIMCount = pMgmt->byDTIMPeriod - 1;
+                        pMgmt->sNodeDBTable[0].bRxPSPoll = TRUE;
+                        bScheduleCommand((HANDLE)pDevice, WLAN_CMD_RX_PSPOLL, NULL);
+                    }
+                }
+            }
+            pDevice->bBeaconSent = TRUE;
+
+            if (pDevice->bChannelSwitch == TRUE) {
+                pDevice->byChannelSwitchCount--;
+                if (pDevice->byChannelSwitchCount == 0) {
+                    pDevice->bChannelSwitch = FALSE;
+                    CARDbSetChannel(pDevice, pDevice->byNewChannel);
+                    VNTWIFIbChannelSwitch(pDevice->pMgmt, pDevice->byNewChannel);
+                    MACvSelectPage1(pDevice->PortOffset);
+                    MACvRegBitsOn(pDevice->PortOffset, MAC_REG_MSRCTL+1, MSRCTL1_TXPAUSE);
+                    MACvSelectPage0(pDevice->PortOffset);
+                    //VNTWIFIbSendBeacon(pDevice->pMgmt);
+                    CARDbStartTxPacket(pDevice, PKT_TYPE_802_11_ALL);
+                }
+            }
+
+        }
+
+        if (pDevice->dwIsr & ISR_RXDMA0) {
+            max_count += device_rx_srv(pDevice, TYPE_RXDMA0);
+        }
+        if (pDevice->dwIsr & ISR_RXDMA1) {
+            max_count += device_rx_srv(pDevice, TYPE_RXDMA1);
+        }
+        if (pDevice->dwIsr & ISR_TXDMA0){
+            max_count += device_tx_srv(pDevice, TYPE_TXDMA0);
+        }
+        if (pDevice->dwIsr & ISR_AC0DMA){
+            max_count += device_tx_srv(pDevice, TYPE_AC0DMA);
+        }
+        if (pDevice->dwIsr & ISR_SOFTTIMER) {
+
+        }
+        if (pDevice->dwIsr & ISR_SOFTTIMER1) {
+            if (pDevice->eOPMode == OP_MODE_AP) {
+               if (pDevice->bShortSlotTime)
+                   pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_SHORTSLOTTIME(1);
+               else
+                   pMgmt->wCurrCapInfo &= ~(WLAN_SET_CAP_INFO_SHORTSLOTTIME(1));
+            }
+            bMgrPrepareBeaconToSend(pDevice, pMgmt);
+            pDevice->byCntMeasure = 0;
+        }
+
+        MACvReadISR(pDevice->PortOffset, &pDevice->dwIsr);
+
+        MACvReceive0(pDevice->PortOffset);
+        MACvReceive1(pDevice->PortOffset);
+
+        if (max_count>pDevice->sOpts.int_works)
+            break;
+    }
+
+    if (byOrgPageSel == 1) {
+        MACvSelectPage1(pDevice->PortOffset);
+    }
+
+    spin_unlock_irq(&pDevice->lock);
+    MACvIntEnable(pDevice->PortOffset, IMR_MASK_VALUE);
+
+    return IRQ_RETVAL(handled);
+}
+
+
+static unsigned const ethernet_polynomial = 0x04c11db7U;
+static inline u32 ether_crc(int length, unsigned char *data)
+{
+    int crc = -1;
+
+    while(--length >= 0) {
+        unsigned char current_octet = *data++;
+        int bit;
+        for (bit = 0; bit < 8; bit++, current_octet >>= 1) {
+            crc = (crc << 1) ^
+                ((crc < 0) ^ (current_octet & 1) ? ethernet_polynomial : 0);
+        }
+    }
+    return crc;
+}
+
+//2008-8-4 <add> by chester
+static int Config_FileGetParameter(UCHAR *string, UCHAR *dest,UCHAR *source)
+{
+  UCHAR buf1[100];
+  int source_len = strlen(source);
+
+    memset(buf1,0,100);
+    strcat(buf1, string);
+    strcat(buf1, "=");
+    source+=strlen(buf1);
+
+   memcpy(dest,source,source_len-strlen(buf1));
+ return TRUE;
+}
+
+int Config_FileOperation(PSDevice pDevice,BOOL fwrite,unsigned char *Parameter) {
+    UCHAR    *config_path=CONFIG_PATH;
+    UCHAR    *buffer=NULL;
+    UCHAR      tmpbuffer[20];
+    struct file   *filp=NULL;
+    mm_segment_t old_fs = get_fs();
+    //int oldfsuid=0,oldfsgid=0;
+    int result=0;
+
+    set_fs (KERNEL_DS);
+
+    /* Can't do this anymore, so we rely on correct filesystem permissions:
+    //Make sure a caller can read or write power as root
+    oldfsuid=current->cred->fsuid;
+    oldfsgid=current->cred->fsgid;
+    current->cred->fsuid = 0;
+    current->cred->fsgid = 0;
+    */
+
+    //open file
+      filp = filp_open(config_path, O_RDWR, 0);
+        if (IS_ERR(filp)) {
+	     printk("Config_FileOperation:open file fail?\n");
+	     result=-1;
+             goto error2;
+	  }
+
+     if(!(filp->f_op) || !(filp->f_op->read) ||!(filp->f_op->write)) {
+           printk("file %s cann't readable or writable?\n",config_path);
+	  result = -1;
+	  goto error1;
+     	}
+
+buffer = (UCHAR *)kmalloc(1024, GFP_KERNEL);
+if(buffer==NULL) {
+  printk("alllocate mem for file fail?\n");
+  result = -1;
+  goto error1;
+}
+
+if(filp->f_op->read(filp, buffer, 1024, &filp->f_pos)<0) {
+ printk("read file error?\n");
+ result = -1;
+ goto error1;
+}
+
+if(Config_FileGetParameter("ZONETYPE",tmpbuffer,buffer)!=TRUE) {
+  printk("get parameter error?\n");
+  result = -1;
+  goto error1;
+}
+
+if(memcmp(tmpbuffer,"USA",3)==0) {
+  result=ZoneType_USA;
+}
+else if(memcmp(tmpbuffer,"JAPAN",5)==0) {
+  result=ZoneType_Japan;
+}
+else if(memcmp(tmpbuffer,"EUROPE",5)==0) {
+ result=ZoneType_Europe;
+}
+else {
+  result = -1;
+  printk("Unknown Zonetype[%s]?\n",tmpbuffer);
+}
+
+error1:
+  if(buffer)
+  	 kfree(buffer);
+
+  if(filp_close(filp,NULL))
+       printk("Config_FileOperation:close file fail\n");
+
+error2:
+  set_fs (old_fs);
+
+  /*
+  current->cred->fsuid=oldfsuid;
+  current->cred->fsgid=oldfsgid;
+  */
+
+  return result;
+}
+
+
+#ifdef PRIVATE_OBJ
+
+void __device_set_multi(HANDLE pExDevice) {
+    PSDevice_info pDevice_info = (PSDevice_info)pExDevice;
+    ref_net_device  *dev = &(pDevice_info->ref_dev);
+    PSDevice    pDevice = (PSDevice)(pDevice_info->pWDevice);
+
+#else
+
+static void device_set_multi(struct net_device *dev) {
+    PSDevice         pDevice = (PSDevice) netdev_priv(dev);
+#endif
+
+    PSMgmtObject     pMgmt = pDevice->pMgmt;
+    u32              mc_filter[2];
+    int              i;
+    struct dev_mc_list  *mclist;
+
+
+    VNSvInPortB(pDevice->PortOffset + MAC_REG_RCR, &(pDevice->byRxMode));
+
+#ifdef PRIVATE_OBJ
+    if (*(dev->flags) & IFF_PROMISC) {         /* Set promiscuous. */
+        DEVICE_PRT(MSG_LEVEL_ERR,KERN_ERR "%s: Promiscuous mode enabled.\n", pDevice->dev->name);
+
+#else
+    if (dev->flags & IFF_PROMISC) {         /* Set promiscuous. */
+        DEVICE_PRT(MSG_LEVEL_ERR,KERN_NOTICE "%s: Promiscuous mode enabled.\n", dev->name);
+#endif
+        /* Unconditionally log net taps. */
+        pDevice->byRxMode |= (RCR_MULTICAST|RCR_BROADCAST|RCR_UNICAST);
+    }
+#ifdef PRIVATE_OBJ
+    else if ((*(dev->mc_count) > pDevice->multicast_limit)
+        ||  (*(dev->flags) & IFF_ALLMULTI)) {
+#else
+    else if ((dev->mc_count > pDevice->multicast_limit)
+        ||  (dev->flags & IFF_ALLMULTI)) {
+#endif
+        MACvSelectPage1(pDevice->PortOffset);
+        VNSvOutPortD(pDevice->PortOffset + MAC_REG_MAR0, 0xffffffff);
+        VNSvOutPortD(pDevice->PortOffset + MAC_REG_MAR0 + 4, 0xffffffff);
+        MACvSelectPage0(pDevice->PortOffset);
+        pDevice->byRxMode |= (RCR_MULTICAST|RCR_BROADCAST);
+    }
+    else {
+        memset(mc_filter, 0, sizeof(mc_filter));
+#ifdef PRIVATE_OBJ
+        for (i = 0, mclist = dev->mc_list; mclist && i < *(dev->mc_count);
+             i++, mclist = mclist->next) {
+#else
+        for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+             i++, mclist = mclist->next) {
+#endif
+            int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
+            mc_filter[bit_nr >> 5] |= cpu_to_le32(1 << (bit_nr & 31));
+        }
+        MACvSelectPage1(pDevice->PortOffset);
+        VNSvOutPortD(pDevice->PortOffset + MAC_REG_MAR0, mc_filter[0]);
+        VNSvOutPortD(pDevice->PortOffset + MAC_REG_MAR0 + 4, mc_filter[1]);
+        MACvSelectPage0(pDevice->PortOffset);
+        pDevice->byRxMode &= ~(RCR_UNICAST);
+        pDevice->byRxMode |= (RCR_MULTICAST|RCR_BROADCAST);
+    }
+
+    if (pMgmt->eConfigMode == WMAC_CONFIG_AP) {
+        // If AP mode, don't enable RCR_UNICAST. Since hw only compare addr1 with local mac.
+        pDevice->byRxMode |= (RCR_MULTICAST|RCR_BROADCAST);
+        pDevice->byRxMode &= ~(RCR_UNICAST);
+    }
+
+    VNSvOutPortB(pDevice->PortOffset + MAC_REG_RCR, pDevice->byRxMode);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "pDevice->byRxMode = %x\n", pDevice->byRxMode );
+}
+
+
+#ifdef PRIVATE_OBJ
+
+struct net_device_stats *__device_get_stats(HANDLE pExDevice) {
+    PSDevice_info pDevice_info = (PSDevice_info)pExDevice;
+    PSDevice    pDevice = (PSDevice)(pDevice_info->pWDevice);
+
+#else
+static struct net_device_stats *device_get_stats(struct net_device *dev) {
+    PSDevice pDevice=(PSDevice) netdev_priv(dev);
+#endif
+
+    return &pDevice->stats;
+}
+
+
+#ifdef PRIVATE_OBJ
+
+int __device_ioctl(HANDLE pExDevice, struct ifreq *rq, int cmd) {
+    PSDevice_info pDevice_info = (PSDevice_info)pExDevice;
+    struct net_device *dev = pDevice_info->dev;
+    PSDevice    pDevice = (PSDevice)(pDevice_info->pWDevice);
+
+#else
+
+static int  device_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) {
+	PSDevice	        pDevice = (PSDevice)netdev_priv(dev);
+#endif
+
+#ifdef WIRELESS_EXT
+	struct iwreq *wrq = (struct iwreq *) rq;
+	int                 rc =0;
+#endif
+    PSMgmtObject        pMgmt = pDevice->pMgmt;
+    PSCmdRequest        pReq;
+
+
+    if (pMgmt == NULL) {
+        rc = -EFAULT;
+        return rc;
+    }
+
+    switch(cmd) {
+
+#ifdef WIRELESS_EXT
+//#if WIRELESS_EXT < 13
+
+	case SIOCGIWNAME:
+		rc = iwctl_giwname(dev, NULL, (char *)&(wrq->u.name), NULL);
+		break;
+
+	case SIOCGIWNWID:     //0x8b03  support
+	#ifdef  WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+          rc = iwctl_giwnwid(dev, NULL, &(wrq->u.nwid), NULL);
+	#else
+        rc = -EOPNOTSUPP;
+	#endif
+		break;
+
+		// Set frequency/channel
+	case SIOCSIWFREQ:
+	    rc = iwctl_siwfreq(dev, NULL, &(wrq->u.freq), NULL);
+		break;
+
+		// Get frequency/channel
+	case SIOCGIWFREQ:
+		rc = iwctl_giwfreq(dev, NULL, &(wrq->u.freq), NULL);
+		break;
+
+		// Set desired network name (ESSID)
+	case SIOCSIWESSID:
+
+		{
+			char essid[IW_ESSID_MAX_SIZE+1];
+			if (wrq->u.essid.length > IW_ESSID_MAX_SIZE) {
+				rc = -E2BIG;
+				break;
+			}
+			if (copy_from_user(essid, wrq->u.essid.pointer,
+					   wrq->u.essid.length)) {
+				rc = -EFAULT;
+				break;
+			}
+			rc = iwctl_siwessid(dev, NULL,
+					    &(wrq->u.essid), essid);
+		}
+		break;
+
+
+		// Get current network name (ESSID)
+	case SIOCGIWESSID:
+
+		{
+			char essid[IW_ESSID_MAX_SIZE+1];
+			if (wrq->u.essid.pointer)
+				rc = iwctl_giwessid(dev, NULL,
+						    &(wrq->u.essid), essid);
+				if (copy_to_user(wrq->u.essid.pointer,
+						         essid,
+						         wrq->u.essid.length) )
+					rc = -EFAULT;
+		}
+		break;
+
+	case SIOCSIWAP:
+
+		rc = iwctl_siwap(dev, NULL, &(wrq->u.ap_addr), NULL);
+		break;
+
+
+		// Get current Access Point (BSSID)
+	case SIOCGIWAP:
+		rc = iwctl_giwap(dev, NULL, &(wrq->u.ap_addr), NULL);
+		break;
+
+
+		// Set desired station name
+	case SIOCSIWNICKN:
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWNICKN \n");
+        rc = -EOPNOTSUPP;
+		break;
+
+		// Get current station name
+	case SIOCGIWNICKN:
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWNICKN \n");
+        rc = -EOPNOTSUPP;
+		break;
+
+		// Set the desired bit-rate
+	case SIOCSIWRATE:
+		rc = iwctl_siwrate(dev, NULL, &(wrq->u.bitrate), NULL);
+		break;
+
+	// Get the current bit-rate
+	case SIOCGIWRATE:
+
+		rc = iwctl_giwrate(dev, NULL, &(wrq->u.bitrate), NULL);
+		break;
+
+	// Set the desired RTS threshold
+	case SIOCSIWRTS:
+
+		rc = iwctl_siwrts(dev, NULL, &(wrq->u.rts), NULL);
+		break;
+
+	// Get the current RTS threshold
+	case SIOCGIWRTS:
+
+		rc = iwctl_giwrts(dev, NULL, &(wrq->u.rts), NULL);
+		break;
+
+		// Set the desired fragmentation threshold
+	case SIOCSIWFRAG:
+
+		rc = iwctl_siwfrag(dev, NULL, &(wrq->u.frag), NULL);
+	    break;
+
+	// Get the current fragmentation threshold
+	case SIOCGIWFRAG:
+
+		rc = iwctl_giwfrag(dev, NULL, &(wrq->u.frag), NULL);
+		break;
+
+		// Set mode of operation
+	case SIOCSIWMODE:
+    	rc = iwctl_siwmode(dev, NULL, &(wrq->u.mode), NULL);
+		break;
+
+		// Get mode of operation
+	case SIOCGIWMODE:
+		rc = iwctl_giwmode(dev, NULL, &(wrq->u.mode), NULL);
+		break;
+
+		// Set WEP keys and mode
+	case SIOCSIWENCODE:
+		{
+            char abyKey[WLAN_WEP232_KEYLEN];
+
+			if (wrq->u.encoding.pointer) {
+
+
+				if (wrq->u.encoding.length > WLAN_WEP232_KEYLEN) {
+					rc = -E2BIG;
+					break;
+				}
+				memset(abyKey, 0, WLAN_WEP232_KEYLEN);
+				if (copy_from_user(abyKey,
+				                  wrq->u.encoding.pointer,
+				                  wrq->u.encoding.length)) {
+					rc = -EFAULT;
+					break;
+				}
+			} else if (wrq->u.encoding.length != 0) {
+				rc = -EINVAL;
+				break;
+			}
+			rc = iwctl_siwencode(dev, NULL, &(wrq->u.encoding), abyKey);
+		}
+		break;
+
+		// Get the WEP keys and mode
+	case SIOCGIWENCODE:
+
+		if (!capable(CAP_NET_ADMIN)) {
+			rc = -EPERM;
+			break;
+		}
+		{
+		    char abyKey[WLAN_WEP232_KEYLEN];
+
+		    rc = iwctl_giwencode(dev, NULL, &(wrq->u.encoding), abyKey);
+		    if (rc != 0) break;
+			if (wrq->u.encoding.pointer) {
+				if (copy_to_user(wrq->u.encoding.pointer,
+						        abyKey,
+						        wrq->u.encoding.length))
+					rc = -EFAULT;
+			}
+		}
+		break;
+
+#if WIRELESS_EXT > 9
+		// Get the current Tx-Power
+	case SIOCGIWTXPOW:
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWTXPOW \n");
+        rc = -EOPNOTSUPP;
+		break;
+
+	case SIOCSIWTXPOW:
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWTXPOW \n");
+        rc = -EOPNOTSUPP;
+		break;
+
+#endif // WIRELESS_EXT > 9
+
+#if WIRELESS_EXT > 10
+	case SIOCSIWRETRY:
+
+		rc = iwctl_siwretry(dev, NULL, &(wrq->u.retry), NULL);
+		break;
+
+	case SIOCGIWRETRY:
+
+		rc = iwctl_giwretry(dev, NULL, &(wrq->u.retry), NULL);
+		break;
+
+#endif // WIRELESS_EXT > 10
+
+		// Get range of parameters
+	case SIOCGIWRANGE:
+
+		{
+			struct iw_range range;
+
+			rc = iwctl_giwrange(dev, NULL, &(wrq->u.data), (char *) &range);
+			if (copy_to_user(wrq->u.data.pointer, &range, sizeof(struct iw_range)))
+				rc = -EFAULT;
+		}
+
+		break;
+
+	case SIOCGIWPOWER:
+
+		rc = iwctl_giwpower(dev, NULL, &(wrq->u.power), NULL);
+		break;
+
+
+	case SIOCSIWPOWER:
+
+		rc = iwctl_siwpower(dev, NULL, &(wrq->u.power), NULL);
+		break;
+
+
+	case SIOCGIWSENS:
+
+	    rc = iwctl_giwsens(dev, NULL, &(wrq->u.sens), NULL);
+		break;
+
+	case SIOCSIWSENS:
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWSENS \n");
+		rc = -EOPNOTSUPP;
+		break;
+
+	case SIOCGIWAPLIST:
+	    {
+            char buffer[IW_MAX_AP * (sizeof(struct sockaddr) + sizeof(struct iw_quality))];
+
+		    if (wrq->u.data.pointer) {
+		        rc = iwctl_giwaplist(dev, NULL, &(wrq->u.data), buffer);
+		        if (rc == 0) {
+                    if (copy_to_user(wrq->u.data.pointer,
+					                buffer,
+					               (wrq->u.data.length * (sizeof(struct sockaddr) +  sizeof(struct iw_quality)))
+				        ))
+				    rc = -EFAULT;
+		        }
+            }
+        }
+		break;
+
+
+#ifdef WIRELESS_SPY
+		// Set the spy list
+	case SIOCSIWSPY:
+
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWSPY \n");
+		rc = -EOPNOTSUPP;
+		break;
+
+		// Get the spy list
+	case SIOCGIWSPY:
+
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWSPY \n");
+		rc = -EOPNOTSUPP;
+		break;
+
+#endif // WIRELESS_SPY
+
+	case SIOCGIWPRIV:
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWPRIV \n");
+		rc = -EOPNOTSUPP;
+/*
+		if(wrq->u.data.pointer) {
+			wrq->u.data.length = sizeof(iwctl_private_args) / sizeof( iwctl_private_args[0]);
+
+			if(copy_to_user(wrq->u.data.pointer,
+					(u_char *) iwctl_private_args,
+					sizeof(iwctl_private_args)))
+				rc = -EFAULT;
+		}
+*/
+		break;
+
+
+//#endif // WIRELESS_EXT < 13
+//2008-0409-07, <Add> by Einsn Liu
+#ifdef  WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+	case SIOCSIWAUTH:
+		DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWAUTH \n");
+		rc = iwctl_siwauth(dev, NULL, &(wrq->u.param), NULL);
+		break;
+
+	case SIOCGIWAUTH:
+		DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWAUTH \n");
+		rc = iwctl_giwauth(dev, NULL, &(wrq->u.param), NULL);
+		break;
+
+	case SIOCSIWGENIE:
+		DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWGENIE \n");
+		rc = iwctl_siwgenie(dev, NULL, &(wrq->u.data), wrq->u.data.pointer);
+		break;
+
+	case SIOCGIWGENIE:
+		DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWGENIE \n");
+		rc = iwctl_giwgenie(dev, NULL, &(wrq->u.data), wrq->u.data.pointer);
+		break;
+
+	case SIOCSIWENCODEEXT:
+		{
+			char extra[sizeof(struct iw_encode_ext)+MAX_KEY_LEN+1];
+			DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWENCODEEXT \n");
+			if(wrq->u.encoding.pointer){
+				memset(extra, 0, sizeof(struct iw_encode_ext)+MAX_KEY_LEN+1);
+				if(wrq->u.encoding.length > (sizeof(struct iw_encode_ext)+ MAX_KEY_LEN)){
+					rc = -E2BIG;
+					break;
+				}
+				if(copy_from_user(extra, wrq->u.encoding.pointer,wrq->u.encoding.length)){
+					rc = -EFAULT;
+					break;
+				}
+			}else if(wrq->u.encoding.length != 0){
+				rc = -EINVAL;
+				break;
+			}
+			rc = iwctl_siwencodeext(dev, NULL, &(wrq->u.encoding), extra);
+		}
+		break;
+
+	case SIOCGIWENCODEEXT:
+		DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWENCODEEXT \n");
+		rc = iwctl_giwencodeext(dev, NULL, &(wrq->u.encoding), NULL);
+		break;
+
+	case SIOCSIWMLME:
+		DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWMLME \n");
+		rc = iwctl_siwmlme(dev, NULL, &(wrq->u.data), wrq->u.data.pointer);
+		break;
+
+#endif // #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+//End Add -- //2008-0409-07, <Add> by Einsn Liu
+
+#endif // WIRELESS_EXT
+
+    case IOCTL_CMD_TEST:
+
+		if (!(pDevice->flags & DEVICE_FLAGS_OPENED)) {
+		    rc = -EFAULT;
+		    break;
+		} else {
+		    rc = 0;
+		}
+        pReq = (PSCmdRequest)rq;
+        pReq->wResult = MAGIC_CODE;
+        break;
+
+    case IOCTL_CMD_SET:
+
+               #ifdef SndEvt_ToAPI
+                  if((((PSCmdRequest)rq)->wCmdCode !=WLAN_CMD_SET_EVT) &&
+		       !(pDevice->flags & DEVICE_FLAGS_OPENED))
+	      #else
+		if (!(pDevice->flags & DEVICE_FLAGS_OPENED) &&
+		       (((PSCmdRequest)rq)->wCmdCode !=WLAN_CMD_SET_WPA))
+	      #endif
+		{
+		    rc = -EFAULT;
+		    break;
+		} else {
+		    rc = 0;
+		}
+
+	    if (test_and_set_bit( 0, (void*)&(pMgmt->uCmdBusy))) {
+		    return -EBUSY;
+	    }
+        rc = private_ioctl(pDevice, rq);
+        clear_bit( 0, (void*)&(pMgmt->uCmdBusy));
+        break;
+
+    case IOCTL_CMD_HOSTAPD:
+
+
+#if WIRELESS_EXT > 8
+		rc = hostap_ioctl(pDevice, &wrq->u.data);
+#else // WIRELESS_EXT > 8
+		rc = hostap_ioctl(pDevice, (struct iw_point *) &wrq->u.data);
+#endif // WIRELESS_EXT > 8
+        break;
+
+    case IOCTL_CMD_WPA:
+
+#if WIRELESS_EXT > 8
+		rc = wpa_ioctl(pDevice, &wrq->u.data);
+#else // WIRELESS_EXT > 8
+		rc = wpa_ioctl(pDevice, (struct iw_point *) &wrq->u.data);
+#endif // WIRELESS_EXT > 8
+        break;
+
+	case SIOCETHTOOL:
+        return ethtool_ioctl(dev, (void *) rq->ifr_data);
+	// All other calls are currently unsupported
+
+	default:
+		rc = -EOPNOTSUPP;
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Ioctl command not support..%x\n", cmd);
+
+
+    }
+
+    if (pDevice->bCommit) {
+       if (pMgmt->eConfigMode == WMAC_CONFIG_AP) {
+           netif_stop_queue(pDevice->dev);
+           spin_lock_irq(&pDevice->lock);
+           bScheduleCommand((HANDLE)pDevice, WLAN_CMD_RUN_AP, NULL);
+           spin_unlock_irq(&pDevice->lock);
+       }
+       else {
+           DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Commit the settings\n");
+           spin_lock_irq(&pDevice->lock);
+           pDevice->bLinkPass = FALSE;
+           memset(pMgmt->abyCurrBSSID, 0, 6);
+           pMgmt->eCurrState = WMAC_STATE_IDLE;
+           netif_stop_queue(pDevice->dev);
+	#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+	      pMgmt->eScanType = WMAC_SCAN_ACTIVE;
+	 if(pDevice->bWPASuppWextEnabled !=TRUE)
+	 #endif
+           bScheduleCommand((HANDLE) pDevice, WLAN_CMD_BSSID_SCAN, pMgmt->abyDesireSSID);
+           bScheduleCommand((HANDLE) pDevice, WLAN_CMD_SSID, NULL);
+           spin_unlock_irq(&pDevice->lock);
+      }
+      pDevice->bCommit = FALSE;
+    }
+
+    return rc;
+}
+
+
+static int ethtool_ioctl(struct net_device *dev, void *useraddr)
+{
+	u32 ethcmd;
+
+	if (copy_from_user(&ethcmd, useraddr, sizeof(ethcmd)))
+		return -EFAULT;
+
+        switch (ethcmd) {
+	case ETHTOOL_GDRVINFO: {
+		struct ethtool_drvinfo info = {ETHTOOL_GDRVINFO};
+		strncpy(info.driver, DEVICE_NAME, sizeof(info.driver)-1);
+		strncpy(info.version, DEVICE_VERSION, sizeof(info.version)-1);
+		if (copy_to_user(useraddr, &info, sizeof(info)))
+			return -EFAULT;
+		return 0;
+	}
+
+        }
+
+	return -EOPNOTSUPP;
+}
+
+/*------------------------------------------------------------------*/
+#ifndef PRIVATE_OBJ
+
+MODULE_DEVICE_TABLE(pci, device_id_table);
+
+static struct pci_driver device_driver = {
+        name:       DEVICE_NAME,
+        id_table:   device_id_table,
+        probe:      device_found1,
+        remove:     device_remove1,
+#ifdef CONFIG_PM
+        suspend:    viawget_suspend,
+        resume:     viawget_resume,
+#endif
+};
+
+static int __init device_init_module(void)
+{
+    int ret;
+
+
+//    ret=pci_module_init(&device_driver);
+	//ret = pcie_port_service_register(&device_driver);
+	ret = pci_register_driver(&device_driver);
+#ifdef CONFIG_PM
+    if(ret >= 0)
+        register_reboot_notifier(&device_notifier);
+#endif
+
+    return ret;
+}
+
+static void __exit device_cleanup_module(void)
+{
+
+
+#ifdef CONFIG_PM
+    unregister_reboot_notifier(&device_notifier);
+#endif
+    pci_unregister_driver(&device_driver);
+
+}
+
+module_init(device_init_module);
+module_exit(device_cleanup_module);
+
+
+#ifdef CONFIG_PM
+static int
+device_notify_reboot(struct notifier_block *nb, unsigned long event, void *p)
+{
+    struct pci_dev *pdev = NULL;
+    switch(event) {
+    case SYS_DOWN:
+    case SYS_HALT:
+    case SYS_POWER_OFF:
+        while ((pdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pdev)) != NULL) {
+            if(pci_dev_driver(pdev) == &device_driver) {
+                if (pci_get_drvdata(pdev))
+                    viawget_suspend(pdev, 3);
+            }
+        }
+    }
+    return NOTIFY_DONE;
+}
+
+static int
+viawget_suspend(struct pci_dev *pcid, u32 state)
+{
+    int power_status;   // to silence the compiler
+
+    PSDevice pDevice=pci_get_drvdata(pcid);
+    PSMgmtObject  pMgmt = pDevice->pMgmt;
+
+    netif_stop_queue(pDevice->dev);
+    spin_lock_irq(&pDevice->lock);
+    pci_save_state(pcid);
+    del_timer(&pDevice->sTimerCommand);
+    del_timer(&pMgmt->sTimerSecondCallback);
+    pDevice->cbFreeCmdQueue = CMD_Q_SIZE;
+    pDevice->uCmdDequeueIdx = 0;
+    pDevice->uCmdEnqueueIdx = 0;
+    pDevice->bCmdRunning = FALSE;
+    MACbShutdown(pDevice->PortOffset);
+    MACvSaveContext(pDevice->PortOffset, pDevice->abyMacContext);
+    pDevice->bLinkPass = FALSE;
+    memset(pMgmt->abyCurrBSSID, 0, 6);
+    pMgmt->eCurrState = WMAC_STATE_IDLE;
+    pci_disable_device(pcid);
+    power_status = pci_set_power_state(pcid, state);
+    spin_unlock_irq(&pDevice->lock);
+    return 0;
+}
+
+static int
+viawget_resume(struct pci_dev *pcid)
+{
+    PSDevice  pDevice=pci_get_drvdata(pcid);
+    PSMgmtObject  pMgmt = pDevice->pMgmt;
+    int power_status;   // to silence the compiler
+
+
+    power_status = pci_set_power_state(pcid, 0);
+    power_status = pci_enable_wake(pcid, 0, 0);
+    pci_restore_state(pcid);
+    if (netif_running(pDevice->dev)) {
+        spin_lock_irq(&pDevice->lock);
+        MACvRestoreContext(pDevice->PortOffset, pDevice->abyMacContext);
+        device_init_registers(pDevice, DEVICE_INIT_DXPL);
+        if (pMgmt->sNodeDBTable[0].bActive == TRUE) { // Assoc with BSS
+            pMgmt->sNodeDBTable[0].bActive = FALSE;
+            pDevice->bLinkPass = FALSE;
+            if(pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) {
+                // In Adhoc, BSS state set back to started.
+                pMgmt->eCurrState = WMAC_STATE_STARTED;
+           }
+            else {
+                pMgmt->eCurrMode = WMAC_MODE_STANDBY;
+                pMgmt->eCurrState = WMAC_STATE_IDLE;
+            }
+        }
+        init_timer(&pMgmt->sTimerSecondCallback);
+        init_timer(&pDevice->sTimerCommand);
+        MACvIntEnable(pDevice->PortOffset, IMR_MASK_VALUE);
+        BSSvClearBSSList((HANDLE)pDevice, pDevice->bLinkPass);
+        bScheduleCommand((HANDLE) pDevice, WLAN_CMD_BSSID_SCAN, NULL);
+        bScheduleCommand((HANDLE) pDevice, WLAN_CMD_SSID, NULL);
+        spin_unlock_irq(&pDevice->lock);
+    }
+    return 0;
+}
+
+#endif
+
+#endif //#ifndef PRIVATE_OBJ
+
+#ifdef PRIVATE_OBJ
+
+
+int __device_hw_reset(HANDLE pExDevice){
+     PSDevice_info pDevice_info = (PSDevice_info)pExDevice;
+
+     return MACbSoftwareReset(pDevice_info->port_offset);
+}
+
+
+int __device_hw_init(HANDLE pExDevice){
+    PSDevice_info pDevice_info = (PSDevice_info)pExDevice;
+    PSDevice    pDevice;
+
+    pDevice = (PSDevice)kmalloc(sizeof(DEVICE_INFO), (int)GFP_ATOMIC);
+    if (pDevice == NULL)
+        return FALSE;
+
+    memset(pDevice, 0, sizeof(DEVICE_INFO));
+    pDevice_info->pWDevice = pDevice;
+    pDevice->PortOffset = pDevice_info->port_offset;
+    pDevice->dev = pDevice_info->dev;
+    pDevice->pcid = pDevice_info->pcid;
+    pDevice->chip_id = pDevice_info->chip_id;
+    pDevice->memaddr = pDevice_info->mem_addr;
+    pDevice->ioaddr = pDevice_info->io_addr;
+    pDevice->io_size = pDevice_info->io_size;
+    pDevice->nTxQueues = pDevice_info->nTxQueues;
+    pDevice->multicast_limit = pDevice_info->multicast_limit;
+    pDevice->sMgmtObj.pAdapter = (PVOID)pDevice;
+    pDevice->pMgmt = &(pDevice->sMgmtObj);
+    MACvInitialize(pDevice->PortOffset);
+    device_get_options(pDevice, 0 , pDevice_info->dev->name);
+    device_set_options(pDevice);
+    pDevice->sOpts.flags &= pDevice_info->flags;
+    pDevice->flags = pDevice->sOpts.flags | (pDevice_info->flags & 0xFF000000UL);
+    spin_lock_init(&(pDevice->lock));
+
+    return TRUE;
+}
+
+
+void __device_read_mac(HANDLE pExDevice, PBYTE dev_addr){
+    PSDevice_info pDevice_info = (PSDevice_info)pExDevice;
+    PSDevice    pDevice = (PSDevice)(pDevice_info->pWDevice);
+
+    MACvReadEtherAddress(pDevice->PortOffset, dev_addr);
+    return;
+}
+
+
+#endif
+
+
diff --git a/drivers/staging/vt6655/dpc.c b/drivers/staging/vt6655/dpc.c
new file mode 100644
index 00000000000..acc6d82a954
--- /dev/null
+++ b/drivers/staging/vt6655/dpc.c
@@ -0,0 +1,1668 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: dpc.c
+ *
+ * Purpose: handle dpc rx functions
+ *
+ * Author: Lyndon Chen
+ *
+ * Date: May 20, 2003
+ *
+ * Functions:
+ *      device_receive_frame - Rcv 802.11 frame function
+ *      s_bAPModeRxCtl- AP Rcv frame filer Ctl.
+ *      s_bAPModeRxData- AP Rcv data frame handle
+ *      s_bHandleRxEncryption- Rcv decrypted data via on-fly
+ *      s_bHostWepRxEncryption- Rcv encrypted data via host
+ *      s_byGetRateIdx- get rate index
+ *      s_vGetDASA- get data offset
+ *      s_vProcessRxMACHeader- Rcv 802.11 and translate to 802.3
+ *
+ * Revision History:
+ *
+ */
+
+
+#if !defined(__DEVICE_H__)
+#include "device.h"
+#endif
+#if !defined(__RXTX_H__)
+#include "rxtx.h"
+#endif
+#if !defined(__TETHER_H__)
+#include "tether.h"
+#endif
+#if !defined(__CARD_H__)
+#include "card.h"
+#endif
+#if !defined(__BSSDB_H__)
+#include "bssdb.h"
+#endif
+#if !defined(__MAC_H__)
+#include "mac.h"
+#endif
+#if !defined(__BASEBAND_H__)
+#include "baseband.h"
+#endif
+#if !defined(__UMEM_H__)
+#include "umem.h"
+#endif
+#if !defined(__MICHAEL_H__)
+#include "michael.h"
+#endif
+#if !defined(__TKIP_H__)
+#include "tkip.h"
+#endif
+#if !defined(__TCRC_H__)
+#include "tcrc.h"
+#endif
+#if !defined(__WCTL_H__)
+#include "wctl.h"
+#endif
+#if !defined(__WROUTE_H__)
+#include "wroute.h"
+#endif
+#if !defined(__TBIT_H__)
+#include "tbit.h"
+#endif
+#if !defined(__HOSTAP_H__)
+#include "hostap.h"
+#endif
+#if !defined(__RF_H__)
+#include "rf.h"
+#endif
+#if !defined(__IOWPA_H__)
+#include "iowpa.h"
+#endif
+#if !defined(__AES_H__)
+#include "aes_ccmp.h"
+#endif
+
+//#define	PLICE_DEBUG
+
+
+/*---------------------  Static Definitions -------------------------*/
+
+/*---------------------  Static Classes  ----------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+//static int          msglevel                =MSG_LEVEL_DEBUG;
+static int          msglevel                =MSG_LEVEL_INFO;
+
+const BYTE acbyRxRate[MAX_RATE] =
+{2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108};
+
+
+/*---------------------  Static Functions  --------------------------*/
+
+/*---------------------  Static Definitions -------------------------*/
+
+/*---------------------  Static Functions  --------------------------*/
+
+static BYTE s_byGetRateIdx(IN BYTE byRate);
+
+
+static
+VOID
+s_vGetDASA(
+    IN  PBYTE pbyRxBufferAddr,
+    OUT PUINT pcbHeaderSize,
+    OUT PSEthernetHeader psEthHeader
+    );
+
+static
+VOID
+s_vProcessRxMACHeader (
+    IN  PSDevice pDevice,
+    IN  PBYTE pbyRxBufferAddr,
+    IN  UINT cbPacketSize,
+    IN  BOOL bIsWEP,
+    IN  BOOL bExtIV,
+    OUT PUINT pcbHeadSize
+    );
+
+static BOOL s_bAPModeRxCtl(
+    IN PSDevice pDevice,
+    IN PBYTE    pbyFrame,
+    IN INT      iSANodeIndex
+    );
+
+#ifdef PRIVATE_OBJ
+
+static BOOL s_bAPModeRxData (
+    IN PSDevice pDevice,
+    IN ref_sk_buff* skb,
+    IN UINT     FrameSize,
+    IN UINT     cbHeaderOffset,
+    IN INT      iSANodeIndex,
+    IN INT      iDANodeIndex
+    );
+#else
+
+static BOOL s_bAPModeRxData (
+    IN PSDevice pDevice,
+    IN struct sk_buff* skb,
+    IN UINT     FrameSize,
+    IN UINT     cbHeaderOffset,
+    IN INT      iSANodeIndex,
+    IN INT      iDANodeIndex
+    );
+#endif
+
+
+static BOOL s_bHandleRxEncryption(
+    IN PSDevice     pDevice,
+    IN PBYTE        pbyFrame,
+    IN UINT         FrameSize,
+    IN PBYTE        pbyRsr,
+    OUT PBYTE       pbyNewRsr,
+    OUT PSKeyItem   *pKeyOut,
+    OUT PBOOL       pbExtIV,
+    OUT PWORD       pwRxTSC15_0,
+    OUT PDWORD      pdwRxTSC47_16
+    );
+
+static BOOL s_bHostWepRxEncryption(
+
+    IN PSDevice     pDevice,
+    IN PBYTE        pbyFrame,
+    IN UINT         FrameSize,
+    IN PBYTE        pbyRsr,
+    IN BOOL         bOnFly,
+    IN PSKeyItem    pKey,
+    OUT PBYTE       pbyNewRsr,
+    OUT PBOOL       pbExtIV,
+    OUT PWORD       pwRxTSC15_0,
+    OUT PDWORD      pdwRxTSC47_16
+
+    );
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*+
+ *
+ * Description:
+ *    Translate Rcv 802.11 header to 802.3 header with Rx buffer
+ *
+ * Parameters:
+ *  In:
+ *      pDevice
+ *      dwRxBufferAddr  - Address of Rcv Buffer
+ *      cbPacketSize    - Rcv Packet size
+ *      bIsWEP          - If Rcv with WEP
+ *  Out:
+ *      pcbHeaderSize   - 802.11 header size
+ *
+ * Return Value: None
+ *
+-*/
+static
+VOID
+s_vProcessRxMACHeader (
+    IN  PSDevice pDevice,
+    IN  PBYTE pbyRxBufferAddr,
+    IN  UINT cbPacketSize,
+    IN  BOOL bIsWEP,
+    IN  BOOL bExtIV,
+    OUT PUINT pcbHeadSize
+    )
+{
+    PBYTE           pbyRxBuffer;
+    UINT            cbHeaderSize = 0;
+    PWORD           pwType;
+    PS802_11Header  pMACHeader;
+    int             ii;
+
+
+    pMACHeader = (PS802_11Header) (pbyRxBufferAddr + cbHeaderSize);
+
+    s_vGetDASA((PBYTE)pMACHeader, &cbHeaderSize, &pDevice->sRxEthHeader);
+
+    if (bIsWEP) {
+        if (bExtIV) {
+            // strip IV&ExtIV , add 8 byte
+            cbHeaderSize += (WLAN_HDR_ADDR3_LEN + 8);
+        } else {
+            // strip IV , add 4 byte
+            cbHeaderSize += (WLAN_HDR_ADDR3_LEN + 4);
+        }
+    }
+    else {
+        cbHeaderSize += WLAN_HDR_ADDR3_LEN;
+    };
+
+    pbyRxBuffer = (PBYTE) (pbyRxBufferAddr + cbHeaderSize);
+    if (IS_ETH_ADDRESS_EQUAL(pbyRxBuffer, &pDevice->abySNAP_Bridgetunnel[0])) {
+        cbHeaderSize += 6;
+    }
+    else if (IS_ETH_ADDRESS_EQUAL(pbyRxBuffer, &pDevice->abySNAP_RFC1042[0])) {
+        cbHeaderSize += 6;
+        pwType = (PWORD) (pbyRxBufferAddr + cbHeaderSize);
+        if ((*pwType!= TYPE_PKT_IPX) && (*pwType != cpu_to_le16(0xF380))) {
+        }
+        else {
+            cbHeaderSize -= 8;
+            pwType = (PWORD) (pbyRxBufferAddr + cbHeaderSize);
+            if (bIsWEP) {
+                if (bExtIV) {
+                    *pwType = htons(cbPacketSize - WLAN_HDR_ADDR3_LEN - 8);    // 8 is IV&ExtIV
+                } else {
+                    *pwType = htons(cbPacketSize - WLAN_HDR_ADDR3_LEN - 4);    // 4 is IV
+                }
+            }
+            else {
+                *pwType = htons(cbPacketSize - WLAN_HDR_ADDR3_LEN);
+            }
+        }
+    }
+    else {
+        cbHeaderSize -= 2;
+        pwType = (PWORD) (pbyRxBufferAddr + cbHeaderSize);
+        if (bIsWEP) {
+            if (bExtIV) {
+                *pwType = htons(cbPacketSize - WLAN_HDR_ADDR3_LEN - 8);    // 8 is IV&ExtIV
+            } else {
+                *pwType = htons(cbPacketSize - WLAN_HDR_ADDR3_LEN - 4);    // 4 is IV
+            }
+        }
+        else {
+            *pwType = htons(cbPacketSize - WLAN_HDR_ADDR3_LEN);
+        }
+    }
+
+    cbHeaderSize -= (U_ETHER_ADDR_LEN * 2);
+    pbyRxBuffer = (PBYTE) (pbyRxBufferAddr + cbHeaderSize);
+    for(ii=0;ii<U_ETHER_ADDR_LEN;ii++)
+        *pbyRxBuffer++ = pDevice->sRxEthHeader.abyDstAddr[ii];
+    for(ii=0;ii<U_ETHER_ADDR_LEN;ii++)
+        *pbyRxBuffer++ = pDevice->sRxEthHeader.abySrcAddr[ii];
+
+    *pcbHeadSize = cbHeaderSize;
+}
+
+
+
+
+static BYTE s_byGetRateIdx (IN BYTE byRate)
+{
+    BYTE    byRateIdx;
+
+    for (byRateIdx = 0; byRateIdx <MAX_RATE ; byRateIdx++) {
+        if (acbyRxRate[byRateIdx%MAX_RATE] == byRate)
+            return byRateIdx;
+    }
+    return 0;
+}
+
+
+static
+VOID
+s_vGetDASA (
+    IN  PBYTE pbyRxBufferAddr,
+    OUT PUINT pcbHeaderSize,
+    OUT PSEthernetHeader psEthHeader
+    )
+{
+    UINT            cbHeaderSize = 0;
+    PS802_11Header  pMACHeader;
+    int             ii;
+
+    pMACHeader = (PS802_11Header) (pbyRxBufferAddr + cbHeaderSize);
+
+    if ((pMACHeader->wFrameCtl & FC_TODS) == 0) {
+        if (pMACHeader->wFrameCtl & FC_FROMDS) {
+            for(ii=0;ii<U_ETHER_ADDR_LEN;ii++) {
+                psEthHeader->abyDstAddr[ii] = pMACHeader->abyAddr1[ii];
+                psEthHeader->abySrcAddr[ii] = pMACHeader->abyAddr3[ii];
+            }
+        }
+        else {
+            // IBSS mode
+            for(ii=0;ii<U_ETHER_ADDR_LEN;ii++) {
+                psEthHeader->abyDstAddr[ii] = pMACHeader->abyAddr1[ii];
+                psEthHeader->abySrcAddr[ii] = pMACHeader->abyAddr2[ii];
+            }
+        }
+    }
+    else {
+        // Is AP mode..
+        if (pMACHeader->wFrameCtl & FC_FROMDS) {
+            for(ii=0;ii<U_ETHER_ADDR_LEN;ii++) {
+                psEthHeader->abyDstAddr[ii] = pMACHeader->abyAddr3[ii];
+                psEthHeader->abySrcAddr[ii] = pMACHeader->abyAddr4[ii];
+                cbHeaderSize += 6;
+            }
+        }
+        else {
+            for(ii=0;ii<U_ETHER_ADDR_LEN;ii++) {
+                psEthHeader->abyDstAddr[ii] = pMACHeader->abyAddr3[ii];
+                psEthHeader->abySrcAddr[ii] = pMACHeader->abyAddr2[ii];
+            }
+        }
+    };
+    *pcbHeaderSize = cbHeaderSize;
+}
+
+
+
+
+//PLICE_DEBUG ->
+
+VOID	MngWorkItem(PVOID Context)
+{
+	PSRxMgmtPacket			pRxMgmtPacket;
+	PSDevice	pDevice =  (PSDevice) Context;
+	//printk("Enter MngWorkItem,Queue packet num is %d\n",pDevice->rxManeQueue.packet_num);
+	spin_lock_irq(&pDevice->lock);
+	 while(pDevice->rxManeQueue.packet_num != 0)
+	 {
+		 pRxMgmtPacket =  DeQueue(pDevice);
+        		vMgrRxManagePacket(pDevice, pDevice->pMgmt, pRxMgmtPacket);
+	}
+	spin_unlock_irq(&pDevice->lock);
+}
+
+
+//PLICE_DEBUG<-
+
+
+
+BOOL
+device_receive_frame (
+    IN  PSDevice pDevice,
+    IN  PSRxDesc pCurrRD
+    )
+{
+
+    PDEVICE_RD_INFO  pRDInfo = pCurrRD->pRDInfo;
+#ifdef	PLICE_DEBUG
+	//printk("device_receive_frame:pCurrRD is %x,pRDInfo is %x\n",pCurrRD,pCurrRD->pRDInfo);
+#endif
+    struct net_device_stats* pStats=&pDevice->stats;
+#ifdef PRIVATE_OBJ
+    ref_sk_buff*    skb;
+#else
+    struct sk_buff* skb;
+#endif
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+    PSRxMgmtPacket  pRxPacket = &(pDevice->pMgmt->sRxPacket);
+    PS802_11Header  p802_11Header;
+    PBYTE           pbyRsr;
+    PBYTE           pbyNewRsr;
+    PBYTE           pbyRSSI;
+    PQWORD          pqwTSFTime;
+    PWORD           pwFrameSize;
+    PBYTE           pbyFrame;
+    BOOL            bDeFragRx = FALSE;
+    BOOL            bIsWEP = FALSE;
+    UINT            cbHeaderOffset;
+    UINT            FrameSize;
+    WORD            wEtherType = 0;
+    INT             iSANodeIndex = -1;
+    INT             iDANodeIndex = -1;
+    UINT            ii;
+    UINT            cbIVOffset;
+    BOOL            bExtIV = FALSE;
+    PBYTE           pbyRxSts;
+    PBYTE           pbyRxRate;
+    PBYTE           pbySQ;
+    UINT            cbHeaderSize;
+    PSKeyItem       pKey = NULL;
+    WORD            wRxTSC15_0 = 0;
+    DWORD           dwRxTSC47_16 = 0;
+    SKeyItem        STempKey;
+    // 802.11h RPI
+    DWORD           dwDuration = 0;
+    LONG            ldBm = 0;
+    LONG            ldBmThreshold = 0;
+    PS802_11Header pMACHeader;
+ BOOL            bRxeapol_key = FALSE;
+
+//    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"---------- device_receive_frame---\n");
+#ifdef PRIVATE_OBJ
+    skb = &(pRDInfo->ref_skb);
+#else
+
+    skb = pRDInfo->skb;
+#endif
+
+
+//PLICE_DEBUG->
+#if 1
+	pci_unmap_single(pDevice->pcid, pRDInfo->skb_dma,
+                     pDevice->rx_buf_sz, PCI_DMA_FROMDEVICE);
+#endif
+//PLICE_DEBUG<-
+    pwFrameSize = (PWORD)(skb->data + 2);
+    FrameSize = cpu_to_le16(pCurrRD->m_rd1RD1.wReqCount) - cpu_to_le16(pCurrRD->m_rd0RD0.wResCount);
+
+    // Max: 2312Payload + 30HD +4CRC + 2Padding + 4Len + 8TSF + 4RSR
+    // Min (ACK): 10HD +4CRC + 2Padding + 4Len + 8TSF + 4RSR
+    if ((FrameSize > 2364)||(FrameSize <= 32)) {
+        // Frame Size error drop this packet.
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"---------- WRONG Length 1 \n");
+        return FALSE;
+    }
+
+    pbyRxSts = (PBYTE) (skb->data);
+    pbyRxRate = (PBYTE) (skb->data + 1);
+    pbyRsr = (PBYTE) (skb->data + FrameSize - 1);
+    pbyRSSI = (PBYTE) (skb->data + FrameSize - 2);
+    pbyNewRsr = (PBYTE) (skb->data + FrameSize - 3);
+    pbySQ = (PBYTE) (skb->data + FrameSize - 4);
+    pqwTSFTime = (PQWORD) (skb->data + FrameSize - 12);
+    pbyFrame = (PBYTE)(skb->data + 4);
+
+    // get packet size
+    FrameSize = cpu_to_le16(*pwFrameSize);
+
+    if ((FrameSize > 2346)|(FrameSize < 14)) { // Max: 2312Payload + 30HD +4CRC
+                                               // Min: 14 bytes ACK
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"---------- WRONG Length 2 \n");
+        return FALSE;
+    }
+//PLICE_DEBUG->
+#if 1
+	// update receive statistic counter
+    STAvUpdateRDStatCounter(&pDevice->scStatistic,
+                            *pbyRsr,
+                            *pbyNewRsr,
+                            *pbyRxRate,
+                            pbyFrame,
+                            FrameSize);
+
+#endif
+
+  pMACHeader=(PS802_11Header)((PBYTE) (skb->data)+8);
+//PLICE_DEBUG<-
+	if (pDevice->bMeasureInProgress == TRUE) {
+        if ((*pbyRsr & RSR_CRCOK) != 0) {
+            pDevice->byBasicMap |= 0x01;
+        }
+        dwDuration = (FrameSize << 4);
+        dwDuration /= acbyRxRate[*pbyRxRate%MAX_RATE];
+        if (*pbyRxRate <= RATE_11M) {
+            if (BITbIsBitOn(*pbyRxSts, 0x01)) {
+                // long preamble
+                dwDuration += 192;
+            } else {
+                // short preamble
+                dwDuration += 96;
+            }
+        } else {
+            dwDuration += 16;
+        }
+        RFvRSSITodBm(pDevice, *pbyRSSI, &ldBm);
+        ldBmThreshold = -57;
+        for (ii = 7; ii > 0;) {
+            if (ldBm > ldBmThreshold) {
+                break;
+            }
+            ldBmThreshold -= 5;
+            ii--;
+        }
+        pDevice->dwRPIs[ii] += dwDuration;
+        return FALSE;
+    }
+
+    if (!IS_MULTICAST_ADDRESS(pbyFrame) && !IS_BROADCAST_ADDRESS(pbyFrame)) {
+        if (WCTLbIsDuplicate(&(pDevice->sDupRxCache), (PS802_11Header) (skb->data + 4))) {
+            pDevice->s802_11Counter.FrameDuplicateCount++;
+            return FALSE;
+        }
+    }
+
+
+    // Use for TKIP MIC
+    s_vGetDASA(skb->data+4, &cbHeaderSize, &pDevice->sRxEthHeader);
+
+    // filter packet send from myself
+    if (IS_ETH_ADDRESS_EQUAL((PBYTE)&(pDevice->sRxEthHeader.abySrcAddr[0]), pDevice->abyCurrentNetAddr))
+        return FALSE;
+
+    if ((pMgmt->eCurrMode == WMAC_MODE_ESS_AP) || (pMgmt->eCurrMode == WMAC_MODE_IBSS_STA)) {
+        if (IS_CTL_PSPOLL(pbyFrame) || !IS_TYPE_CONTROL(pbyFrame)) {
+            p802_11Header = (PS802_11Header) (pbyFrame);
+            // get SA NodeIndex
+            if (BSSDBbIsSTAInNodeDB(pMgmt, (PBYTE)(p802_11Header->abyAddr2), &iSANodeIndex)) {
+#ifdef PRIVATE_OBJ
+                pMgmt->sNodeDBTable[iSANodeIndex].ulLastRxJiffer = get_jiffies();
+#else
+                pMgmt->sNodeDBTable[iSANodeIndex].ulLastRxJiffer = jiffies;
+#endif
+                pMgmt->sNodeDBTable[iSANodeIndex].uInActiveCount = 0;
+            }
+        }
+    }
+
+    if (pMgmt->eCurrMode == WMAC_MODE_ESS_AP) {
+        if (s_bAPModeRxCtl(pDevice, pbyFrame, iSANodeIndex) == TRUE) {
+            return FALSE;
+        }
+    }
+    if (IS_FC_WEP(pbyFrame)) {
+        BOOL     bRxDecryOK = FALSE;
+
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"rx WEP pkt\n");
+        bIsWEP = TRUE;
+        if ((pDevice->bEnableHostWEP) && (iSANodeIndex >= 0)) {
+            pKey = &STempKey;
+            pKey->byCipherSuite = pMgmt->sNodeDBTable[iSANodeIndex].byCipherSuite;
+            pKey->dwKeyIndex = pMgmt->sNodeDBTable[iSANodeIndex].dwKeyIndex;
+            pKey->uKeyLength = pMgmt->sNodeDBTable[iSANodeIndex].uWepKeyLength;
+            pKey->dwTSC47_16 = pMgmt->sNodeDBTable[iSANodeIndex].dwTSC47_16;
+            pKey->wTSC15_0 = pMgmt->sNodeDBTable[iSANodeIndex].wTSC15_0;
+            memcpy(pKey->abyKey,
+                &pMgmt->sNodeDBTable[iSANodeIndex].abyWepKey[0],
+                pKey->uKeyLength
+                );
+
+            bRxDecryOK = s_bHostWepRxEncryption(pDevice,
+                                                pbyFrame,
+                                                FrameSize,
+                                                pbyRsr,
+                                                pMgmt->sNodeDBTable[iSANodeIndex].bOnFly,
+                                                pKey,
+                                                pbyNewRsr,
+                                                &bExtIV,
+                                                &wRxTSC15_0,
+                                                &dwRxTSC47_16);
+        } else {
+            bRxDecryOK = s_bHandleRxEncryption(pDevice,
+                                                pbyFrame,
+                                                FrameSize,
+                                                pbyRsr,
+                                                pbyNewRsr,
+                                                &pKey,
+                                                &bExtIV,
+                                                &wRxTSC15_0,
+                                                &dwRxTSC47_16);
+        }
+
+        if (bRxDecryOK) {
+            if ((*pbyNewRsr & NEWRSR_DECRYPTOK) == 0) {
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ICV Fail\n");
+                if ( (pDevice->pMgmt->eAuthenMode == WMAC_AUTH_WPA) ||
+                    (pDevice->pMgmt->eAuthenMode == WMAC_AUTH_WPAPSK) ||
+                    (pDevice->pMgmt->eAuthenMode == WMAC_AUTH_WPANONE) ||
+                    (pDevice->pMgmt->eAuthenMode == WMAC_AUTH_WPA2) ||
+                    (pDevice->pMgmt->eAuthenMode == WMAC_AUTH_WPA2PSK)) {
+
+                    if ((pKey != NULL) && (pKey->byCipherSuite == KEY_CTL_TKIP)) {
+                        pDevice->s802_11Counter.TKIPICVErrors++;
+                    } else if ((pKey != NULL) && (pKey->byCipherSuite == KEY_CTL_CCMP)) {
+                        pDevice->s802_11Counter.CCMPDecryptErrors++;
+                    } else if ((pKey != NULL) && (pKey->byCipherSuite == KEY_CTL_WEP)) {
+//                      pDevice->s802_11Counter.WEPICVErrorCount.QuadPart++;
+                    }
+                }
+                return FALSE;
+            }
+        } else {
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"WEP Func Fail\n");
+            return FALSE;
+        }
+        if ((pKey != NULL) && (pKey->byCipherSuite == KEY_CTL_CCMP))
+            FrameSize -= 8;         // Message Integrity Code
+        else
+            FrameSize -= 4;         // 4 is ICV
+    }
+
+
+    //
+    // RX OK
+    //
+    //remove the CRC length
+    FrameSize -= U_CRC_LEN;
+
+    if ((BITbIsAllBitsOff(*pbyRsr, (RSR_ADDRBROAD | RSR_ADDRMULTI))) && // unicast address
+        (IS_FRAGMENT_PKT((skb->data+4)))
+        ) {
+        // defragment
+        bDeFragRx = WCTLbHandleFragment(pDevice, (PS802_11Header) (skb->data+4), FrameSize, bIsWEP, bExtIV);
+        pDevice->s802_11Counter.ReceivedFragmentCount++;
+        if (bDeFragRx) {
+            // defrag complete
+#ifdef PRIVATE_OBJ
+            skb = &(pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].ref_skb);
+#else
+            skb = pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].skb;
+#endif
+            FrameSize = pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].cbFrameLength;
+
+        }
+        else {
+            return FALSE;
+        }
+    }
+
+
+// Management & Control frame Handle
+    if ((IS_TYPE_DATA((skb->data+4))) == FALSE) {
+        // Handle Control & Manage Frame
+
+        if (IS_TYPE_MGMT((skb->data+4))) {
+            PBYTE pbyData1;
+            PBYTE pbyData2;
+
+            pRxPacket->p80211Header = (PUWLAN_80211HDR)(skb->data+4);
+            pRxPacket->cbMPDULen = FrameSize;
+            pRxPacket->uRSSI = *pbyRSSI;
+            pRxPacket->bySQ = *pbySQ;
+            HIDWORD(pRxPacket->qwLocalTSF) = cpu_to_le32(HIDWORD(*pqwTSFTime));
+            LODWORD(pRxPacket->qwLocalTSF) = cpu_to_le32(LODWORD(*pqwTSFTime));
+            if (bIsWEP) {
+                // strip IV
+                pbyData1 = WLAN_HDR_A3_DATA_PTR(skb->data+4);
+                pbyData2 = WLAN_HDR_A3_DATA_PTR(skb->data+4) + 4;
+                for (ii = 0; ii < (FrameSize - 4); ii++) {
+                    *pbyData1 = *pbyData2;
+                     pbyData1++;
+                     pbyData2++;
+                }
+            }
+            pRxPacket->byRxRate = s_byGetRateIdx(*pbyRxRate);
+            pRxPacket->byRxChannel = (*pbyRxSts) >> 2;
+//PLICE_DEBUG->
+//EnQueue(pDevice,pRxPacket);
+
+#ifdef	THREAD
+		EnQueue(pDevice,pRxPacket);
+
+		//printk("enque time is %x\n",jiffies);
+		//up(&pDevice->mlme_semaphore);
+			//Enque (pDevice->FirstRecvMngList,pDevice->LastRecvMngList,pMgmt);
+#else
+
+#ifdef	TASK_LET
+		EnQueue(pDevice,pRxPacket);
+		tasklet_schedule(&pDevice->RxMngWorkItem);
+#else
+//printk("RxMan\n");
+	vMgrRxManagePacket((HANDLE)pDevice, pDevice->pMgmt, pRxPacket);
+           //tasklet_schedule(&pDevice->RxMngWorkItem);
+#endif
+
+#endif
+//PLICE_DEBUG<-
+			//vMgrRxManagePacket((HANDLE)pDevice, pDevice->pMgmt, pRxPacket);
+            // hostap Deamon handle 802.11 management
+            if (pDevice->bEnableHostapd) {
+	            skb->dev = pDevice->apdev;
+#ifdef PRIVATE_OBJ
+                ref_skb_add_offset(skb->skb, 4);
+                ref_skb_set_dev(pDevice->apdev, skb->skb);
+                skb_put(skb->skb, FrameSize);
+	            skb->mac_header = skb->data;
+	            *(skb->pkt_type) = PACKET_OTHERHOST;
+    	        *(skb->protocol) = htons(ETH_P_802_2);
+	            memset(skb->cb, 0, sizeof(skb->cb));
+	            netif_rx(skb->skb);
+#else
+	            skb->data += 4;
+	            skb->tail += 4;
+                     skb_put(skb, FrameSize);
+	            skb->mac_header = skb->data;
+	            skb->pkt_type = PACKET_OTHERHOST;
+    	        skb->protocol = htons(ETH_P_802_2);
+	            memset(skb->cb, 0, sizeof(skb->cb));
+	            netif_rx(skb);
+#endif
+                return TRUE;
+	        }
+        }
+        else {
+            // Control Frame
+        };
+        return FALSE;
+    }
+    else {
+        if (pMgmt->eCurrMode == WMAC_MODE_ESS_AP) {
+            //In AP mode, hw only check addr1(BSSID or RA) if equal to local MAC.
+            if (BITbIsBitOff(*pbyRsr, RSR_BSSIDOK)) {
+                if (bDeFragRx) {
+                    if (!device_alloc_frag_buf(pDevice, &pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx])) {
+                        DEVICE_PRT(MSG_LEVEL_ERR,KERN_ERR "%s: can not alloc more frag bufs\n",
+                        pDevice->dev->name);
+                    }
+                }
+                return FALSE;
+            }
+        }
+        else {
+            // discard DATA packet while not associate || BSSID error
+            if ((pDevice->bLinkPass == FALSE) ||
+                BITbIsBitOff(*pbyRsr, RSR_BSSIDOK)) {
+                if (bDeFragRx) {
+                    if (!device_alloc_frag_buf(pDevice, &pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx])) {
+                        DEVICE_PRT(MSG_LEVEL_ERR,KERN_ERR "%s: can not alloc more frag bufs\n",
+                        pDevice->dev->name);
+                    }
+                }
+                return FALSE;
+            }
+
+   //mike add:station mode check eapol-key challenge--->
+   	  {
+   	    BYTE  Protocol_Version;    //802.1x Authentication
+	    BYTE  Packet_Type;           //802.1x Authentication
+              if (bIsWEP)
+                  cbIVOffset = 8;
+              else
+                  cbIVOffset = 0;
+              wEtherType = (skb->data[cbIVOffset + 8 + 24 + 6] << 8) |
+                          skb->data[cbIVOffset + 8 + 24 + 6 + 1];
+	      Protocol_Version = skb->data[cbIVOffset + 8 + 24 + 6 + 1 +1];
+	      Packet_Type = skb->data[cbIVOffset + 8 + 24 + 6 + 1 +1+1];
+	     if (wEtherType == ETH_P_PAE) {         //Protocol Type in LLC-Header
+                  if(((Protocol_Version==1) ||(Protocol_Version==2)) &&
+		     (Packet_Type==3)) {  //802.1x OR eapol-key challenge frame receive
+                        bRxeapol_key = TRUE;
+                  }
+	      }
+   	  }
+    //mike add:station mode check eapol-key challenge<---
+        }
+    }
+
+// Data frame Handle
+
+    if (pDevice->bEnablePSMode) {
+        if (IS_FC_MOREDATA((skb->data+4))) {
+            if (BITbIsBitOn(*pbyRsr, RSR_ADDROK)) {
+                //PSbSendPSPOLL((PSDevice)pDevice);
+            }
+        }
+        else {
+            if (pDevice->pMgmt->bInTIMWake == TRUE) {
+                pDevice->pMgmt->bInTIMWake = FALSE;
+            }
+        }
+    };
+
+    // Now it only supports 802.11g Infrastructure Mode, and support rate must up to 54 Mbps
+    if (pDevice->bDiversityEnable && (FrameSize>50) &&
+        (pDevice->eOPMode == OP_MODE_INFRASTRUCTURE) &&
+        (pDevice->bLinkPass == TRUE)) {
+	//printk("device_receive_frame: RxRate is %d\n",*pbyRxRate);
+		BBvAntennaDiversity(pDevice, s_byGetRateIdx(*pbyRxRate), 0);
+    }
+
+
+    if (pDevice->byLocalID != REV_ID_VT3253_B1) {
+        pDevice->uCurrRSSI = *pbyRSSI;
+    }
+    pDevice->byCurrSQ = *pbySQ;
+
+    if ((*pbyRSSI != 0) &&
+        (pMgmt->pCurrBSS!=NULL)) {
+        RFvRSSITodBm(pDevice, *pbyRSSI, &ldBm);
+        // Moniter if RSSI is too strong.
+        pMgmt->pCurrBSS->byRSSIStatCnt++;
+        pMgmt->pCurrBSS->byRSSIStatCnt %= RSSI_STAT_COUNT;
+        pMgmt->pCurrBSS->ldBmAverage[pMgmt->pCurrBSS->byRSSIStatCnt] = ldBm;
+        for(ii=0;ii<RSSI_STAT_COUNT;ii++) {
+            if (pMgmt->pCurrBSS->ldBmAverage[ii] != 0) {
+            pMgmt->pCurrBSS->ldBmMAX = max(pMgmt->pCurrBSS->ldBmAverage[ii], ldBm);
+            }
+        }
+    }
+
+    // -----------------------------------------------
+
+    if ((pMgmt->eCurrMode == WMAC_MODE_ESS_AP) && (pDevice->bEnable8021x == TRUE)){
+        BYTE    abyMacHdr[24];
+
+        // Only 802.1x packet incoming allowed
+        if (bIsWEP)
+            cbIVOffset = 8;
+        else
+            cbIVOffset = 0;
+        wEtherType = (skb->data[cbIVOffset + 4 + 24 + 6] << 8) |
+                    skb->data[cbIVOffset + 4 + 24 + 6 + 1];
+
+	    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"wEtherType = %04x \n", wEtherType);
+        if (wEtherType == ETH_P_PAE) {
+            skb->dev = pDevice->apdev;
+
+            if (bIsWEP == TRUE) {
+                // strip IV header(8)
+                memcpy(&abyMacHdr[0], (skb->data + 4), 24);
+                memcpy((skb->data + 4 + cbIVOffset), &abyMacHdr[0], 24);
+            }
+#ifdef PRIVATE_OBJ
+            ref_skb_add_offset(skb->skb, (cbIVOffset + 4));
+            ref_skb_set_dev(pDevice->apdev, skb->skb);
+            skb_put(skb->skb, FrameSize);
+			skb->mac_header = skb->data;
+            *(skb->pkt_type) = PACKET_OTHERHOST;
+	        *(skb->protocol) = htons(ETH_P_802_2);
+            memset(skb->cb, 0, sizeof(skb->cb));
+            netif_rx(skb->skb);
+#else
+            skb->data +=  (cbIVOffset + 4);
+            skb->tail +=  (cbIVOffset + 4);
+            skb_put(skb, FrameSize);
+           skb->mac_header = skb->data;
+
+	skb->pkt_type = PACKET_OTHERHOST;
+            skb->protocol = htons(ETH_P_802_2);
+            memset(skb->cb, 0, sizeof(skb->cb));
+            netif_rx(skb);
+#endif
+            return TRUE;
+
+}
+        // check if 802.1x authorized
+        if (!(pMgmt->sNodeDBTable[iSANodeIndex].dwFlags & WLAN_STA_AUTHORIZED))
+            return FALSE;
+    }
+
+
+    if ((pKey != NULL) && (pKey->byCipherSuite == KEY_CTL_TKIP)) {
+        if (bIsWEP) {
+            FrameSize -= 8;  //MIC
+        }
+    }
+
+    //--------------------------------------------------------------------------------
+    // Soft MIC
+    if ((pKey != NULL) && (pKey->byCipherSuite == KEY_CTL_TKIP)) {
+        if (bIsWEP) {
+            PDWORD          pdwMIC_L;
+            PDWORD          pdwMIC_R;
+            DWORD           dwMIC_Priority;
+            DWORD           dwMICKey0 = 0, dwMICKey1 = 0;
+            DWORD           dwLocalMIC_L = 0;
+            DWORD           dwLocalMIC_R = 0;
+            viawget_wpa_header *wpahdr;
+
+
+            if (pMgmt->eCurrMode == WMAC_MODE_ESS_AP) {
+                dwMICKey0 = cpu_to_le32(*(PDWORD)(&pKey->abyKey[24]));
+                dwMICKey1 = cpu_to_le32(*(PDWORD)(&pKey->abyKey[28]));
+            }
+            else {
+                if (pDevice->pMgmt->eAuthenMode == WMAC_AUTH_WPANONE) {
+                    dwMICKey0 = cpu_to_le32(*(PDWORD)(&pKey->abyKey[16]));
+                    dwMICKey1 = cpu_to_le32(*(PDWORD)(&pKey->abyKey[20]));
+                } else if ((pKey->dwKeyIndex & BIT28) == 0) {
+                    dwMICKey0 = cpu_to_le32(*(PDWORD)(&pKey->abyKey[16]));
+                    dwMICKey1 = cpu_to_le32(*(PDWORD)(&pKey->abyKey[20]));
+                } else {
+                    dwMICKey0 = cpu_to_le32(*(PDWORD)(&pKey->abyKey[24]));
+                    dwMICKey1 = cpu_to_le32(*(PDWORD)(&pKey->abyKey[28]));
+                }
+            }
+
+            MIC_vInit(dwMICKey0, dwMICKey1);
+            MIC_vAppend((PBYTE)&(pDevice->sRxEthHeader.abyDstAddr[0]), 12);
+            dwMIC_Priority = 0;
+            MIC_vAppend((PBYTE)&dwMIC_Priority, 4);
+            // 4 is Rcv buffer header, 24 is MAC Header, and 8 is IV and Ext IV.
+            MIC_vAppend((PBYTE)(skb->data + 4 + WLAN_HDR_ADDR3_LEN + 8),
+                        FrameSize - WLAN_HDR_ADDR3_LEN - 8);
+            MIC_vGetMIC(&dwLocalMIC_L, &dwLocalMIC_R);
+            MIC_vUnInit();
+
+            pdwMIC_L = (PDWORD)(skb->data + 4 + FrameSize);
+            pdwMIC_R = (PDWORD)(skb->data + 4 + FrameSize + 4);
+            //DBG_PRN_GRP12(("RxL: %lx, RxR: %lx\n", *pdwMIC_L, *pdwMIC_R));
+            //DBG_PRN_GRP12(("LocalL: %lx, LocalR: %lx\n", dwLocalMIC_L, dwLocalMIC_R));
+            //DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"dwMICKey0= %lx,dwMICKey1= %lx \n", dwMICKey0, dwMICKey1);
+
+
+            if ((cpu_to_le32(*pdwMIC_L) != dwLocalMIC_L) || (cpu_to_le32(*pdwMIC_R) != dwLocalMIC_R) ||
+                (pDevice->bRxMICFail == TRUE)) {
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"MIC comparison is fail!\n");
+                pDevice->bRxMICFail = FALSE;
+                //pDevice->s802_11Counter.TKIPLocalMICFailures.QuadPart++;
+                pDevice->s802_11Counter.TKIPLocalMICFailures++;
+                if (bDeFragRx) {
+                    if (!device_alloc_frag_buf(pDevice, &pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx])) {
+                        DEVICE_PRT(MSG_LEVEL_ERR,KERN_ERR "%s: can not alloc more frag bufs\n",
+                            pDevice->dev->name);
+                    }
+                }
+
+//2008-0409-07, <Add> by Einsn Liu
+       #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+				//send event to wpa_supplicant
+				//if(pDevice->bWPADevEnable == TRUE)
+					{
+					union iwreq_data wrqu;
+					struct iw_michaelmicfailure ev;
+					int keyidx = pbyFrame[cbHeaderSize+3] >> 6; //top two-bits
+					memset(&ev, 0, sizeof(ev));
+					ev.flags = keyidx & IW_MICFAILURE_KEY_ID;
+					if ((pMgmt->eCurrMode == WMAC_MODE_ESS_STA) &&
+							(pMgmt->eCurrState == WMAC_STATE_ASSOC) &&
+								(*pbyRsr & (RSR_ADDRBROAD | RSR_ADDRMULTI)) == 0) {
+						ev.flags |= IW_MICFAILURE_PAIRWISE;
+					} else {
+						ev.flags |= IW_MICFAILURE_GROUP;
+					}
+
+					ev.src_addr.sa_family = ARPHRD_ETHER;
+					memcpy(ev.src_addr.sa_data, pMACHeader->abyAddr2, ETH_ALEN);
+					memset(&wrqu, 0, sizeof(wrqu));
+					wrqu.data.length = sizeof(ev);
+					wireless_send_event(pDevice->dev, IWEVMICHAELMICFAILURE, &wrqu, (char *)&ev);
+
+				}
+         #endif
+                if ((pDevice->bWPADEVUp) && (pDevice->skb != NULL)) {
+                     wpahdr = (viawget_wpa_header *)pDevice->skb->data;
+                     if ((pDevice->pMgmt->eCurrMode == WMAC_MODE_ESS_STA) &&
+                         (pDevice->pMgmt->eCurrState == WMAC_STATE_ASSOC) &&
+                         (*pbyRsr & (RSR_ADDRBROAD | RSR_ADDRMULTI)) == 0) {
+                         //s802_11_Status.Flags = NDIS_802_11_AUTH_REQUEST_PAIRWISE_ERROR;
+                         wpahdr->type = VIAWGET_PTK_MIC_MSG;
+                     } else {
+                         //s802_11_Status.Flags = NDIS_802_11_AUTH_REQUEST_GROUP_ERROR;
+                         wpahdr->type = VIAWGET_GTK_MIC_MSG;
+                     }
+                     wpahdr->resp_ie_len = 0;
+                     wpahdr->req_ie_len = 0;
+                     skb_put(pDevice->skb, sizeof(viawget_wpa_header));
+                     pDevice->skb->dev = pDevice->wpadev;
+                     pDevice->skb->mac_header = pDevice->skb->data;
+                     pDevice->skb->pkt_type = PACKET_HOST;
+                     pDevice->skb->protocol = htons(ETH_P_802_2);
+                     memset(pDevice->skb->cb, 0, sizeof(pDevice->skb->cb));
+                     netif_rx(pDevice->skb);
+                     pDevice->skb = dev_alloc_skb((int)pDevice->rx_buf_sz);
+                 };
+
+                return FALSE;
+
+            }
+        }
+    } //---end of SOFT MIC-----------------------------------------------------------------------
+
+    // ++++++++++ Reply Counter Check +++++++++++++
+
+    if ((pKey != NULL) && ((pKey->byCipherSuite == KEY_CTL_TKIP) ||
+                           (pKey->byCipherSuite == KEY_CTL_CCMP))) {
+        if (bIsWEP) {
+            WORD        wLocalTSC15_0 = 0;
+            DWORD       dwLocalTSC47_16 = 0;
+            ULONGLONG       RSC = 0;
+            // endian issues
+            RSC = *((ULONGLONG *) &(pKey->KeyRSC));
+            wLocalTSC15_0 = (WORD) RSC;
+            dwLocalTSC47_16 = (DWORD) (RSC>>16);
+
+            RSC = dwRxTSC47_16;
+            RSC <<= 16;
+            RSC += wRxTSC15_0;
+            MEMvCopy(&(pKey->KeyRSC), &RSC,  sizeof(QWORD));
+
+            if ( (pDevice->sMgmtObj.eCurrMode == WMAC_MODE_ESS_STA) &&
+                 (pDevice->sMgmtObj.eCurrState == WMAC_STATE_ASSOC)) {
+                // check RSC
+                if ( (wRxTSC15_0 < wLocalTSC15_0) &&
+                     (dwRxTSC47_16 <= dwLocalTSC47_16) &&
+                     !((dwRxTSC47_16 == 0) && (dwLocalTSC47_16 == 0xFFFFFFFF))) {
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"TSC is illegal~~!\n ");
+                    if (pKey->byCipherSuite == KEY_CTL_TKIP)
+                        //pDevice->s802_11Counter.TKIPReplays.QuadPart++;
+                        pDevice->s802_11Counter.TKIPReplays++;
+                    else
+                        //pDevice->s802_11Counter.CCMPReplays.QuadPart++;
+                        pDevice->s802_11Counter.CCMPReplays++;
+
+                    if (bDeFragRx) {
+                        if (!device_alloc_frag_buf(pDevice, &pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx])) {
+                            DEVICE_PRT(MSG_LEVEL_ERR,KERN_ERR "%s: can not alloc more frag bufs\n",
+                                pDevice->dev->name);
+                        }
+                    }
+                    return FALSE;
+                }
+            }
+        }
+    } // ----- End of Reply Counter Check --------------------------
+
+
+
+    if ((pKey != NULL) && (bIsWEP)) {
+//      pDevice->s802_11Counter.DecryptSuccessCount.QuadPart++;
+    }
+
+
+    s_vProcessRxMACHeader(pDevice, (PBYTE)(skb->data+4), FrameSize, bIsWEP, bExtIV, &cbHeaderOffset);
+    FrameSize -= cbHeaderOffset;
+    cbHeaderOffset += 4;        // 4 is Rcv buffer header
+
+    // Null data, framesize = 14
+    if (FrameSize < 15)
+        return FALSE;
+
+    if (pMgmt->eCurrMode == WMAC_MODE_ESS_AP) {
+        if (s_bAPModeRxData(pDevice,
+                            skb,
+                            FrameSize,
+                            cbHeaderOffset,
+                            iSANodeIndex,
+                            iDANodeIndex
+                            ) == FALSE) {
+
+            if (bDeFragRx) {
+                if (!device_alloc_frag_buf(pDevice, &pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx])) {
+                    DEVICE_PRT(MSG_LEVEL_ERR,KERN_ERR "%s: can not alloc more frag bufs\n",
+                    pDevice->dev->name);
+                }
+            }
+            return FALSE;
+        }
+
+//        if(pDevice->bRxMICFail == FALSE) {
+//           for (ii =0; ii < 100; ii++)
+//                printk(" %02x", *(skb->data + ii));
+//           printk("\n");
+//	    }
+
+    }
+
+#ifdef PRIVATE_OBJ
+    ref_skb_add_offset(skb->skb, cbHeaderOffset);
+    skb_put(skb->skb, FrameSize);
+    *(skb->protocol)=eth_type_trans(skb->skb, skb->dev);
+
+#else
+	skb->data += cbHeaderOffset;
+	skb->tail += cbHeaderOffset;
+    skb_put(skb, FrameSize);
+    skb->protocol=eth_type_trans(skb, skb->dev);
+#endif
+
+
+	//drop frame not met IEEE 802.3
+/*
+	if (pDevice->flags & DEVICE_FLAGS_VAL_PKT_LEN) {
+#ifdef PRIVATE_OBJ
+		if ((*(skb->protocol)==htons(ETH_P_802_3)) &&
+			(*(skb->len)!=htons(skb->mac.ethernet->h_proto))) {
+#else
+		if ((skb->protocol==htons(ETH_P_802_3)) &&
+			(skb->len!=htons(skb->mac.ethernet->h_proto))) {
+#endif
+			pStats->rx_length_errors++;
+			pStats->rx_dropped++;
+            if (bDeFragRx) {
+                if (!device_alloc_frag_buf(pDevice, &pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx])) {
+                    DEVICE_PRT(MSG_LEVEL_ERR,KERN_ERR "%s: can not alloc more frag bufs\n",
+                    pDevice->dev->name);
+                }
+            }
+			return FALSE;
+		}
+	}
+*/
+
+#ifdef PRIVATE_OBJ
+    *(skb->ip_summed)=CHECKSUM_NONE;
+    pStats->rx_bytes +=*(skb->len);
+    pStats->rx_packets++;
+    netif_rx(skb->skb);
+#else
+    skb->ip_summed=CHECKSUM_NONE;
+    pStats->rx_bytes +=skb->len;
+    pStats->rx_packets++;
+    netif_rx(skb);
+#endif
+
+    if (bDeFragRx) {
+        if (!device_alloc_frag_buf(pDevice, &pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx])) {
+            DEVICE_PRT(MSG_LEVEL_ERR,KERN_ERR "%s: can not alloc more frag bufs\n",
+                pDevice->dev->name);
+        }
+        return FALSE;
+    }
+    return TRUE;
+}
+
+
+static BOOL s_bAPModeRxCtl (
+    IN PSDevice pDevice,
+    IN PBYTE    pbyFrame,
+    IN INT      iSANodeIndex
+    )
+{
+    PS802_11Header      p802_11Header;
+    CMD_STATUS          Status;
+    PSMgmtObject        pMgmt = pDevice->pMgmt;
+
+
+    if (IS_CTL_PSPOLL(pbyFrame) || !IS_TYPE_CONTROL(pbyFrame)) {
+
+        p802_11Header = (PS802_11Header) (pbyFrame);
+        if (!IS_TYPE_MGMT(pbyFrame)) {
+
+            // Data & PS-Poll packet
+            // check frame class
+            if (iSANodeIndex > 0) {
+                // frame class 3 fliter & checking
+                if (pMgmt->sNodeDBTable[iSANodeIndex].eNodeState < NODE_AUTH) {
+                    // send deauth notification
+                    // reason = (6) class 2 received from nonauth sta
+                    vMgrDeAuthenBeginSta(pDevice,
+                                         pMgmt,
+                                         (PBYTE)(p802_11Header->abyAddr2),
+                                         (WLAN_MGMT_REASON_CLASS2_NONAUTH),
+                                         &Status
+                                         );
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "dpc: send vMgrDeAuthenBeginSta 1\n");
+                    return TRUE;
+                };
+                if (pMgmt->sNodeDBTable[iSANodeIndex].eNodeState < NODE_ASSOC) {
+                    // send deassoc notification
+                    // reason = (7) class 3 received from nonassoc sta
+                    vMgrDisassocBeginSta(pDevice,
+                                         pMgmt,
+                                         (PBYTE)(p802_11Header->abyAddr2),
+                                         (WLAN_MGMT_REASON_CLASS3_NONASSOC),
+                                         &Status
+                                         );
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "dpc: send vMgrDisassocBeginSta 2\n");
+                    return TRUE;
+                };
+
+                if (pMgmt->sNodeDBTable[iSANodeIndex].bPSEnable) {
+                    // delcare received ps-poll event
+                    if (IS_CTL_PSPOLL(pbyFrame)) {
+                        pMgmt->sNodeDBTable[iSANodeIndex].bRxPSPoll = TRUE;
+                        bScheduleCommand((HANDLE)pDevice, WLAN_CMD_RX_PSPOLL, NULL);
+                        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "dpc: WLAN_CMD_RX_PSPOLL 1\n");
+                    }
+                    else {
+                        // check Data PS state
+                        // if PW bit off, send out all PS bufferring packets.
+                        if (!IS_FC_POWERMGT(pbyFrame)) {
+                            pMgmt->sNodeDBTable[iSANodeIndex].bPSEnable = FALSE;
+                            pMgmt->sNodeDBTable[iSANodeIndex].bRxPSPoll = TRUE;
+                            bScheduleCommand((HANDLE)pDevice, WLAN_CMD_RX_PSPOLL, NULL);
+                            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "dpc: WLAN_CMD_RX_PSPOLL 2\n");
+                        }
+                    }
+                }
+                else {
+                   if (IS_FC_POWERMGT(pbyFrame)) {
+                       pMgmt->sNodeDBTable[iSANodeIndex].bPSEnable = TRUE;
+                       // Once if STA in PS state, enable multicast bufferring
+                       pMgmt->sNodeDBTable[0].bPSEnable = TRUE;
+                   }
+                   else {
+                      // clear all pending PS frame.
+                      if (pMgmt->sNodeDBTable[iSANodeIndex].wEnQueueCnt > 0) {
+                          pMgmt->sNodeDBTable[iSANodeIndex].bPSEnable = FALSE;
+                          pMgmt->sNodeDBTable[iSANodeIndex].bRxPSPoll = TRUE;
+                          bScheduleCommand((HANDLE)pDevice, WLAN_CMD_RX_PSPOLL, NULL);
+                         DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "dpc: WLAN_CMD_RX_PSPOLL 3\n");
+
+                      }
+                   }
+                }
+            }
+            else {
+                  vMgrDeAuthenBeginSta(pDevice,
+                                       pMgmt,
+                                       (PBYTE)(p802_11Header->abyAddr2),
+                                       (WLAN_MGMT_REASON_CLASS2_NONAUTH),
+                                       &Status
+                                       );
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "dpc: send vMgrDeAuthenBeginSta 3\n");
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "BSSID:%02x-%02x-%02x=%02x-%02x-%02x \n",
+                                p802_11Header->abyAddr3[0],
+                                p802_11Header->abyAddr3[1],
+                                p802_11Header->abyAddr3[2],
+                                p802_11Header->abyAddr3[3],
+                                p802_11Header->abyAddr3[4],
+                                p802_11Header->abyAddr3[5]
+                               );
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "ADDR2:%02x-%02x-%02x=%02x-%02x-%02x \n",
+                                p802_11Header->abyAddr2[0],
+                                p802_11Header->abyAddr2[1],
+                                p802_11Header->abyAddr2[2],
+                                p802_11Header->abyAddr2[3],
+                                p802_11Header->abyAddr2[4],
+                                p802_11Header->abyAddr2[5]
+                               );
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "ADDR1:%02x-%02x-%02x=%02x-%02x-%02x \n",
+                                p802_11Header->abyAddr1[0],
+                                p802_11Header->abyAddr1[1],
+                                p802_11Header->abyAddr1[2],
+                                p802_11Header->abyAddr1[3],
+                                p802_11Header->abyAddr1[4],
+                                p802_11Header->abyAddr1[5]
+                               );
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "dpc: wFrameCtl= %x\n", p802_11Header->wFrameCtl );
+                    VNSvInPortB(pDevice->PortOffset + MAC_REG_RCR, &(pDevice->byRxMode));
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "dpc:pDevice->byRxMode = %x\n", pDevice->byRxMode );
+                    return TRUE;
+            }
+        }
+    }
+    return FALSE;
+
+}
+
+static BOOL s_bHandleRxEncryption (
+    IN PSDevice     pDevice,
+    IN PBYTE        pbyFrame,
+    IN UINT         FrameSize,
+    IN PBYTE        pbyRsr,
+    OUT PBYTE       pbyNewRsr,
+    OUT PSKeyItem   *pKeyOut,
+    OUT PBOOL       pbExtIV,
+    OUT PWORD       pwRxTSC15_0,
+    OUT PDWORD      pdwRxTSC47_16
+    )
+{
+    UINT            PayloadLen = FrameSize;
+    PBYTE           pbyIV;
+    BYTE            byKeyIdx;
+    PSKeyItem       pKey = NULL;
+    BYTE            byDecMode = KEY_CTL_WEP;
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+
+
+    *pwRxTSC15_0 = 0;
+    *pdwRxTSC47_16 = 0;
+
+    pbyIV = pbyFrame + WLAN_HDR_ADDR3_LEN;
+    if ( WLAN_GET_FC_TODS(*(PWORD)pbyFrame) &&
+         WLAN_GET_FC_FROMDS(*(PWORD)pbyFrame) ) {
+         pbyIV += 6;             // 6 is 802.11 address4
+         PayloadLen -= 6;
+    }
+    byKeyIdx = (*(pbyIV+3) & 0xc0);
+    byKeyIdx >>= 6;
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\nKeyIdx: %d\n", byKeyIdx);
+
+    if ((pMgmt->eAuthenMode == WMAC_AUTH_WPA) ||
+        (pMgmt->eAuthenMode == WMAC_AUTH_WPAPSK) ||
+        (pMgmt->eAuthenMode == WMAC_AUTH_WPANONE) ||
+        (pMgmt->eAuthenMode == WMAC_AUTH_WPA2) ||
+        (pMgmt->eAuthenMode == WMAC_AUTH_WPA2PSK)) {
+        if (((*pbyRsr & (RSR_ADDRBROAD | RSR_ADDRMULTI)) == 0) &&
+            (pDevice->pMgmt->byCSSPK != KEY_CTL_NONE)) {
+            // unicast pkt use pairwise key
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"unicast pkt\n");
+            if (KeybGetKey(&(pDevice->sKey), pDevice->abyBSSID, 0xFFFFFFFF, &pKey) == TRUE) {
+                if (pDevice->pMgmt->byCSSPK == KEY_CTL_TKIP)
+                    byDecMode = KEY_CTL_TKIP;
+                else if (pDevice->pMgmt->byCSSPK == KEY_CTL_CCMP)
+                    byDecMode = KEY_CTL_CCMP;
+            }
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"unicast pkt: %d, %p\n", byDecMode, pKey);
+        } else {
+            // use group key
+            KeybGetKey(&(pDevice->sKey), pDevice->abyBSSID, byKeyIdx, &pKey);
+            if (pDevice->pMgmt->byCSSGK == KEY_CTL_TKIP)
+                byDecMode = KEY_CTL_TKIP;
+            else if (pDevice->pMgmt->byCSSGK == KEY_CTL_CCMP)
+                byDecMode = KEY_CTL_CCMP;
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"group pkt: %d, %d, %p\n", byKeyIdx, byDecMode, pKey);
+        }
+    }
+    // our WEP only support Default Key
+    if (pKey == NULL) {
+        // use default group key
+        KeybGetKey(&(pDevice->sKey), pDevice->abyBroadcastAddr, byKeyIdx, &pKey);
+        if (pDevice->pMgmt->byCSSGK == KEY_CTL_TKIP)
+            byDecMode = KEY_CTL_TKIP;
+        else if (pDevice->pMgmt->byCSSGK == KEY_CTL_CCMP)
+            byDecMode = KEY_CTL_CCMP;
+    }
+    *pKeyOut = pKey;
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"AES:%d %d %d\n", pDevice->pMgmt->byCSSPK, pDevice->pMgmt->byCSSGK, byDecMode);
+
+    if (pKey == NULL) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey == NULL\n");
+        if (byDecMode == KEY_CTL_WEP) {
+//            pDevice->s802_11Counter.WEPUndecryptableCount.QuadPart++;
+        } else if (pDevice->bLinkPass == TRUE) {
+//            pDevice->s802_11Counter.DecryptFailureCount.QuadPart++;
+        }
+        return FALSE;
+    }
+    if (byDecMode != pKey->byCipherSuite) {
+        if (byDecMode == KEY_CTL_WEP) {
+//            pDevice->s802_11Counter.WEPUndecryptableCount.QuadPart++;
+        } else if (pDevice->bLinkPass == TRUE) {
+//            pDevice->s802_11Counter.DecryptFailureCount.QuadPart++;
+        }
+        *pKeyOut = NULL;
+        return FALSE;
+    }
+    if (byDecMode == KEY_CTL_WEP) {
+        // handle WEP
+        if ((pDevice->byLocalID <= REV_ID_VT3253_A1) ||
+            (((PSKeyTable)(pKey->pvKeyTable))->bSoftWEP == TRUE)) {
+            // Software WEP
+            // 1. 3253A
+            // 2. WEP 256
+
+            PayloadLen -= (WLAN_HDR_ADDR3_LEN + 4 + 4); // 24 is 802.11 header,4 is IV, 4 is crc
+            MEMvCopy(pDevice->abyPRNG, pbyIV, 3);
+            MEMvCopy(pDevice->abyPRNG + 3, pKey->abyKey, pKey->uKeyLength);
+            rc4_init(&pDevice->SBox, pDevice->abyPRNG, pKey->uKeyLength + 3);
+            rc4_encrypt(&pDevice->SBox, pbyIV+4, pbyIV+4, PayloadLen);
+
+            if (ETHbIsBufferCrc32Ok(pbyIV+4, PayloadLen)) {
+                *pbyNewRsr |= NEWRSR_DECRYPTOK;
+            }
+        }
+    } else if ((byDecMode == KEY_CTL_TKIP) ||
+               (byDecMode == KEY_CTL_CCMP)) {
+        // TKIP/AES
+
+        PayloadLen -= (WLAN_HDR_ADDR3_LEN + 8 + 4); // 24 is 802.11 header, 8 is IV&ExtIV, 4 is crc
+        *pdwRxTSC47_16 = cpu_to_le32(*(PDWORD)(pbyIV + 4));
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ExtIV: %lx\n",*pdwRxTSC47_16);
+        if (byDecMode == KEY_CTL_TKIP) {
+            *pwRxTSC15_0 = cpu_to_le16(MAKEWORD(*(pbyIV+2), *pbyIV));
+        } else {
+            *pwRxTSC15_0 = cpu_to_le16(*(PWORD)pbyIV);
+        }
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"TSC0_15: %x\n", *pwRxTSC15_0);
+
+        if ((byDecMode == KEY_CTL_TKIP) &&
+            (pDevice->byLocalID <= REV_ID_VT3253_A1)) {
+            // Software TKIP
+            // 1. 3253 A
+            PS802_11Header  pMACHeader = (PS802_11Header) (pbyFrame);
+            TKIPvMixKey(pKey->abyKey, pMACHeader->abyAddr2, *pwRxTSC15_0, *pdwRxTSC47_16, pDevice->abyPRNG);
+            rc4_init(&pDevice->SBox, pDevice->abyPRNG, TKIP_KEY_LEN);
+            rc4_encrypt(&pDevice->SBox, pbyIV+8, pbyIV+8, PayloadLen);
+            if (ETHbIsBufferCrc32Ok(pbyIV+8, PayloadLen)) {
+                *pbyNewRsr |= NEWRSR_DECRYPTOK;
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ICV OK!\n");
+            } else {
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ICV FAIL!!!\n");
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"PayloadLen = %d\n", PayloadLen);
+            }
+        }
+    }// end of TKIP/AES
+
+    if ((*(pbyIV+3) & 0x20) != 0)
+        *pbExtIV = TRUE;
+    return TRUE;
+}
+
+
+static BOOL s_bHostWepRxEncryption (
+    IN PSDevice     pDevice,
+    IN PBYTE        pbyFrame,
+    IN UINT         FrameSize,
+    IN PBYTE        pbyRsr,
+    IN BOOL         bOnFly,
+    IN PSKeyItem    pKey,
+    OUT PBYTE       pbyNewRsr,
+    OUT PBOOL       pbExtIV,
+    OUT PWORD       pwRxTSC15_0,
+    OUT PDWORD      pdwRxTSC47_16
+    )
+{
+    UINT            PayloadLen = FrameSize;
+    PBYTE           pbyIV;
+    BYTE            byKeyIdx;
+    BYTE            byDecMode = KEY_CTL_WEP;
+    PS802_11Header  pMACHeader;
+
+
+
+    *pwRxTSC15_0 = 0;
+    *pdwRxTSC47_16 = 0;
+
+    pbyIV = pbyFrame + WLAN_HDR_ADDR3_LEN;
+    if ( WLAN_GET_FC_TODS(*(PWORD)pbyFrame) &&
+         WLAN_GET_FC_FROMDS(*(PWORD)pbyFrame) ) {
+         pbyIV += 6;             // 6 is 802.11 address4
+         PayloadLen -= 6;
+    }
+    byKeyIdx = (*(pbyIV+3) & 0xc0);
+    byKeyIdx >>= 6;
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\nKeyIdx: %d\n", byKeyIdx);
+
+
+    if (pDevice->pMgmt->byCSSGK == KEY_CTL_TKIP)
+        byDecMode = KEY_CTL_TKIP;
+    else if (pDevice->pMgmt->byCSSGK == KEY_CTL_CCMP)
+        byDecMode = KEY_CTL_CCMP;
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"AES:%d %d %d\n", pDevice->pMgmt->byCSSPK, pDevice->pMgmt->byCSSGK, byDecMode);
+
+    if (byDecMode != pKey->byCipherSuite) {
+        if (byDecMode == KEY_CTL_WEP) {
+//            pDevice->s802_11Counter.WEPUndecryptableCount.QuadPart++;
+        } else if (pDevice->bLinkPass == TRUE) {
+//            pDevice->s802_11Counter.DecryptFailureCount.QuadPart++;
+        }
+        return FALSE;
+    }
+
+    if (byDecMode == KEY_CTL_WEP) {
+        // handle WEP
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"byDecMode == KEY_CTL_WEP \n");
+        if ((pDevice->byLocalID <= REV_ID_VT3253_A1) ||
+            (((PSKeyTable)(pKey->pvKeyTable))->bSoftWEP == TRUE) ||
+            (bOnFly == FALSE)) {
+            // Software WEP
+            // 1. 3253A
+            // 2. WEP 256
+            // 3. NotOnFly
+
+            PayloadLen -= (WLAN_HDR_ADDR3_LEN + 4 + 4); // 24 is 802.11 header,4 is IV, 4 is crc
+            MEMvCopy(pDevice->abyPRNG, pbyIV, 3);
+            MEMvCopy(pDevice->abyPRNG + 3, pKey->abyKey, pKey->uKeyLength);
+            rc4_init(&pDevice->SBox, pDevice->abyPRNG, pKey->uKeyLength + 3);
+            rc4_encrypt(&pDevice->SBox, pbyIV+4, pbyIV+4, PayloadLen);
+
+            if (ETHbIsBufferCrc32Ok(pbyIV+4, PayloadLen)) {
+                *pbyNewRsr |= NEWRSR_DECRYPTOK;
+            }
+        }
+    } else if ((byDecMode == KEY_CTL_TKIP) ||
+               (byDecMode == KEY_CTL_CCMP)) {
+        // TKIP/AES
+
+        PayloadLen -= (WLAN_HDR_ADDR3_LEN + 8 + 4); // 24 is 802.11 header, 8 is IV&ExtIV, 4 is crc
+        *pdwRxTSC47_16 = cpu_to_le32(*(PDWORD)(pbyIV + 4));
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ExtIV: %lx\n",*pdwRxTSC47_16);
+
+        if (byDecMode == KEY_CTL_TKIP) {
+            *pwRxTSC15_0 = cpu_to_le16(MAKEWORD(*(pbyIV+2), *pbyIV));
+        } else {
+            *pwRxTSC15_0 = cpu_to_le16(*(PWORD)pbyIV);
+        }
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"TSC0_15: %x\n", *pwRxTSC15_0);
+
+        if (byDecMode == KEY_CTL_TKIP) {
+            if ((pDevice->byLocalID <= REV_ID_VT3253_A1) || (bOnFly == FALSE)) {
+                // Software TKIP
+                // 1. 3253 A
+                // 2. NotOnFly
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"soft KEY_CTL_TKIP \n");
+                pMACHeader = (PS802_11Header) (pbyFrame);
+                TKIPvMixKey(pKey->abyKey, pMACHeader->abyAddr2, *pwRxTSC15_0, *pdwRxTSC47_16, pDevice->abyPRNG);
+                rc4_init(&pDevice->SBox, pDevice->abyPRNG, TKIP_KEY_LEN);
+                rc4_encrypt(&pDevice->SBox, pbyIV+8, pbyIV+8, PayloadLen);
+                if (ETHbIsBufferCrc32Ok(pbyIV+8, PayloadLen)) {
+                    *pbyNewRsr |= NEWRSR_DECRYPTOK;
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ICV OK!\n");
+                } else {
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ICV FAIL!!!\n");
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"PayloadLen = %d\n", PayloadLen);
+                }
+            }
+        }
+
+        if (byDecMode == KEY_CTL_CCMP) {
+            if (bOnFly == FALSE) {
+                // Software CCMP
+                // NotOnFly
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"soft KEY_CTL_CCMP\n");
+                if (AESbGenCCMP(pKey->abyKey, pbyFrame, FrameSize)) {
+                    *pbyNewRsr |= NEWRSR_DECRYPTOK;
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"CCMP MIC compare OK!\n");
+                } else {
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"CCMP MIC fail!\n");
+                }
+            }
+        }
+
+    }// end of TKIP/AES
+
+    if ((*(pbyIV+3) & 0x20) != 0)
+        *pbExtIV = TRUE;
+    return TRUE;
+}
+
+
+
+
+#ifdef PRIVATE_OBJ
+
+static BOOL s_bAPModeRxData (
+    IN PSDevice pDevice,
+    IN ref_sk_buff* skb,
+    IN UINT     FrameSize,
+    IN UINT     cbHeaderOffset,
+    IN INT      iSANodeIndex,
+    IN INT      iDANodeIndex
+    )
+
+#else
+
+static BOOL s_bAPModeRxData (
+    IN PSDevice pDevice,
+    IN struct sk_buff* skb,
+    IN UINT     FrameSize,
+    IN UINT     cbHeaderOffset,
+    IN INT      iSANodeIndex,
+    IN INT      iDANodeIndex
+    )
+#endif
+{
+    PSMgmtObject        pMgmt = pDevice->pMgmt;
+    BOOL                bRelayAndForward = FALSE;
+    BOOL                bRelayOnly = FALSE;
+    BYTE                byMask[8] = {1, 2, 4, 8, 0x10, 0x20, 0x40, 0x80};
+    WORD                wAID;
+#ifdef PRIVATE_OBJ
+    struct sk_buff* tmp_skb;
+    ref_sk_buff     s_ref_skb;
+    ref_sk_buff*    skbcpy = &s_ref_skb;
+#else
+    struct sk_buff* skbcpy = NULL;
+#endif
+
+
+
+    if (FrameSize > CB_MAX_BUF_SIZE)
+        return FALSE;
+    // check DA
+    if(IS_MULTICAST_ADDRESS((PBYTE)(skb->data+cbHeaderOffset))) {
+       if (pMgmt->sNodeDBTable[0].bPSEnable) {
+
+#ifdef PRIVATE_OBJ
+           tmp_skb = dev_alloc_skb((int)pDevice->rx_buf_sz);
+           skbcpy = &s_ref_skb;
+           ref_skb_remap(pDevice->dev, skbcpy, tmp_skb);
+#else
+           skbcpy = dev_alloc_skb((int)pDevice->rx_buf_sz);
+#endif
+        // if any node in PS mode, buffer packet until DTIM.
+           if (skbcpy == NULL) {
+               DEVICE_PRT(MSG_LEVEL_NOTICE, KERN_INFO "relay multicast no skb available \n");
+           }
+           else {
+               skbcpy->dev = pDevice->dev;
+#ifdef PRIVATE_OBJ
+               *(skbcpy->len) = FrameSize;
+               memcpy(skbcpy->data, skb->data+cbHeaderOffset, FrameSize);
+               skb_queue_tail(&(pMgmt->sNodeDBTable[0].sTxPSQueue), skbcpy->skb);
+#else
+               skbcpy->len = FrameSize;
+               memcpy(skbcpy->data, skb->data+cbHeaderOffset, FrameSize);
+               skb_queue_tail(&(pMgmt->sNodeDBTable[0].sTxPSQueue), skbcpy);
+#endif
+               pMgmt->sNodeDBTable[0].wEnQueueCnt++;
+               // set tx map
+               pMgmt->abyPSTxMap[0] |= byMask[0];
+           }
+       }
+       else {
+           bRelayAndForward = TRUE;
+       }
+    }
+    else {
+        // check if relay
+        if (BSSDBbIsSTAInNodeDB(pMgmt, (PBYTE)(skb->data+cbHeaderOffset), &iDANodeIndex)) {
+            if (pMgmt->sNodeDBTable[iDANodeIndex].eNodeState >= NODE_ASSOC) {
+                if (pMgmt->sNodeDBTable[iDANodeIndex].bPSEnable) {
+                    // queue this skb until next PS tx, and then release.
+
+#ifdef PRIVATE_OBJ
+                    ref_skb_add_offset(skb->skb, cbHeaderOffset);
+                    skb_put(skb->skb, FrameSize);
+                    skb_queue_tail(&pMgmt->sNodeDBTable[iDANodeIndex].sTxPSQueue, skb->skb);
+#else
+	                skb->data += cbHeaderOffset;
+	                skb->tail += cbHeaderOffset;
+                    skb_put(skb, FrameSize);
+                    skb_queue_tail(&pMgmt->sNodeDBTable[iDANodeIndex].sTxPSQueue, skb);
+#endif
+                    pMgmt->sNodeDBTable[iDANodeIndex].wEnQueueCnt++;
+                    wAID = pMgmt->sNodeDBTable[iDANodeIndex].wAID;
+                    pMgmt->abyPSTxMap[wAID >> 3] |=  byMask[wAID & 7];
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "relay: index= %d, pMgmt->abyPSTxMap[%d]= %d\n",
+                               iDANodeIndex, (wAID >> 3), pMgmt->abyPSTxMap[wAID >> 3]);
+                    return TRUE;
+                }
+                else {
+                    bRelayOnly = TRUE;
+                }
+            }
+        };
+    }
+
+    if (bRelayOnly || bRelayAndForward) {
+        // relay this packet right now
+        if (bRelayAndForward)
+            iDANodeIndex = 0;
+
+        if ((pDevice->uAssocCount > 1) && (iDANodeIndex >= 0)) {
+            ROUTEbRelay(pDevice, (PBYTE)(skb->data + cbHeaderOffset), FrameSize, (UINT)iDANodeIndex);
+        }
+
+        if (bRelayOnly)
+            return FALSE;
+    }
+    // none associate, don't forward
+    if (pDevice->uAssocCount == 0)
+        return FALSE;
+
+    return TRUE;
+}
+
diff --git a/drivers/staging/vt6655/dpc.h b/drivers/staging/vt6655/dpc.h
new file mode 100644
index 00000000000..68447c44dc2
--- /dev/null
+++ b/drivers/staging/vt6655/dpc.h
@@ -0,0 +1,75 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: whdr.h
+ *
+ * Purpose:
+ *
+ * Author: Jerry Chen
+ *
+ * Date: Jun. 27, 2002
+ *
+ */
+
+
+#ifndef __DPC_H__
+#define __DPC_H__
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+#if !defined(__DEVICE_H__)
+#include "device.h"
+#endif
+#if !defined(__WCMD_H__)
+#include "wcmd.h"
+#endif
+
+
+/*---------------------  Export Definitions -------------------------*/
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+
+
+#ifdef __cplusplus
+extern "C" {                            /* Assume C declarations for C++ */
+#endif /* __cplusplus */
+
+
+BOOL
+device_receive_frame (
+    IN  PSDevice pDevice,
+    IN  PSRxDesc pCurrRD
+    );
+
+
+#ifdef __cplusplus
+}                                       /* End of extern "C" { */
+#endif /* __cplusplus */
+
+
+
+VOID	MngWorkItem(PVOID Context);
+#endif // __RXTX_H__
+
+
+
diff --git a/drivers/staging/vt6655/hostap.c b/drivers/staging/vt6655/hostap.c
new file mode 100644
index 00000000000..91f189ddeef
--- /dev/null
+++ b/drivers/staging/vt6655/hostap.c
@@ -0,0 +1,914 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: hostap.c
+ *
+ * Purpose: handle hostap deamon ioctl input/out functions
+ *
+ * Author: Lyndon Chen
+ *
+ * Date: Oct. 20, 2003
+ *
+ * Functions:
+ *
+ * Revision History:
+ *
+ */
+
+
+#if !defined(__HOSTAP_H__)
+#include "hostap.h"
+#endif
+#if !defined(__IOCMD_H__)
+#include "iocmd.h"
+#endif
+#if !defined(__MAC_H__)
+#include "mac.h"
+#endif
+#if !defined(__CARD_H__)
+#include "card.h"
+#endif
+#if !defined(__BASEBAND_H__)
+#include "baseband.h"
+#endif
+#if !defined(__WPACTL_H__)
+#include "wpactl.h"
+#endif
+#if !defined(__KEY_H__)
+#include "key.h"
+#endif
+#if !defined(__MAC_H__)
+#include "mac.h"
+#endif
+
+
+#define VIAWGET_HOSTAPD_MAX_BUF_SIZE 1024
+#define HOSTAP_CRYPT_FLAG_SET_TX_KEY BIT0
+#define HOSTAP_CRYPT_FLAG_PERMANENT BIT1
+#define HOSTAP_CRYPT_ERR_UNKNOWN_ALG 2
+#define HOSTAP_CRYPT_ERR_UNKNOWN_ADDR 3
+#define HOSTAP_CRYPT_ERR_CRYPT_INIT_FAILED 4
+#define HOSTAP_CRYPT_ERR_KEY_SET_FAILED 5
+#define HOSTAP_CRYPT_ERR_TX_KEY_SET_FAILED 6
+#define HOSTAP_CRYPT_ERR_CARD_CONF_FAILED 7
+
+
+/*---------------------  Static Definitions -------------------------*/
+
+/*---------------------  Static Classes  ----------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+//static int          msglevel                =MSG_LEVEL_DEBUG;
+static int          msglevel                =MSG_LEVEL_INFO;
+
+/*---------------------  Static Functions  --------------------------*/
+
+
+
+
+/*---------------------  Export Variables  --------------------------*/
+
+
+/*
+ * Description:
+ *      register net_device (AP) for hostap deamon
+ *
+ * Parameters:
+ *  In:
+ *      pDevice             -
+ *      rtnl_locked         -
+ *  Out:
+ *
+ * Return Value:
+ *
+ */
+
+static int hostap_enable_hostapd(PSDevice pDevice, int rtnl_locked)
+{
+    PSDevice apdev_priv;
+	struct net_device *dev = pDevice->dev;
+	int ret;
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: Enabling hostapd mode\n", dev->name);
+
+#ifdef PRIVATE_OBJ
+    pDevice->apdev = ref_init_apdev(dev);
+
+    if (pDevice->apdev == NULL)
+		return -ENOMEM;
+
+	if (rtnl_locked)
+		ret = register_netdevice(pDevice->apdev);
+	else
+		ret = register_netdev(pDevice->apdev);
+	if (ret) {
+		DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: register_netdevice(AP) failed!\n",
+		       dev->name);
+		return -1;
+	}
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: Registered netdevice %s for AP management\n",
+	       dev->name, pDevice->apdev->name);
+
+#else
+    pDevice->apdev = (struct net_device *)kmalloc(sizeof(struct net_device), GFP_KERNEL);
+	if (pDevice->apdev == NULL)
+		return -ENOMEM;
+	memset(pDevice->apdev, 0, sizeof(struct net_device));
+
+    apdev_priv = netdev_priv(pDevice->apdev);
+    *apdev_priv = *pDevice;
+	memcpy(pDevice->apdev->dev_addr, dev->dev_addr, ETH_ALEN);
+
+    const struct net_device_ops apdev_netdev_ops = {
+        .ndo_start_xmit         = pDevice->tx_80211,
+    };
+    pDevice->apdev->netdev_ops = &apdev_netdev_ops;
+
+	pDevice->apdev->type = ARPHRD_IEEE80211;
+
+	pDevice->apdev->base_addr = dev->base_addr;
+	pDevice->apdev->irq = dev->irq;
+	pDevice->apdev->mem_start = dev->mem_start;
+	pDevice->apdev->mem_end = dev->mem_end;
+	sprintf(pDevice->apdev->name, "%sap", dev->name);
+	if (rtnl_locked)
+		ret = register_netdevice(pDevice->apdev);
+	else
+		ret = register_netdev(pDevice->apdev);
+	if (ret) {
+		DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: register_netdevice(AP) failed!\n",
+		       dev->name);
+		return -1;
+	}
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: Registered netdevice %s for AP management\n",
+	       dev->name, pDevice->apdev->name);
+
+    KeyvInitTable(&pDevice->sKey, pDevice->PortOffset);
+#endif
+
+	return 0;
+}
+
+/*
+ * Description:
+ *      unregister net_device(AP)
+ *
+ * Parameters:
+ *  In:
+ *      pDevice             -
+ *      rtnl_locked         -
+ *  Out:
+ *
+ * Return Value:
+ *
+ */
+
+static int hostap_disable_hostapd(PSDevice pDevice, int rtnl_locked)
+{
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: disabling hostapd mode\n", pDevice->dev->name);
+
+    if (pDevice->apdev && pDevice->apdev->name && pDevice->apdev->name[0]) {
+		if (rtnl_locked)
+			unregister_netdevice(pDevice->apdev);
+		else
+			unregister_netdev(pDevice->apdev);
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: Netdevice %s unregistered\n",
+		       pDevice->dev->name, pDevice->apdev->name);
+	}
+	kfree(pDevice->apdev);
+	pDevice->apdev = NULL;
+    pDevice->bEnable8021x = FALSE;
+    pDevice->bEnableHostWEP = FALSE;
+    pDevice->bEncryptionEnable = FALSE;
+
+//4.2007-0118-03,<Add> by EinsnLiu
+//execute some clear work
+pDevice->pMgmt->byCSSPK=KEY_CTL_NONE;
+pDevice->pMgmt->byCSSGK=KEY_CTL_NONE;
+KeyvInitTable(&pDevice->sKey,pDevice->PortOffset);
+
+	return 0;
+}
+
+
+/*
+ * Description:
+ *      Set enable/disable hostapd mode
+ *
+ * Parameters:
+ *  In:
+ *      pDevice             -
+ *      rtnl_locked         -
+ *  Out:
+ *
+ * Return Value:
+ *
+ */
+
+int hostap_set_hostapd(PSDevice pDevice, int val, int rtnl_locked)
+{
+	if (val < 0 || val > 1)
+		return -EINVAL;
+
+	if (pDevice->bEnableHostapd == val)
+		return 0;
+
+	pDevice->bEnableHostapd = val;
+
+	if (val)
+		return hostap_enable_hostapd(pDevice, rtnl_locked);
+	else
+		return hostap_disable_hostapd(pDevice, rtnl_locked);
+}
+
+
+/*
+ * Description:
+ *      remove station function supported for hostap deamon
+ *
+ * Parameters:
+ *  In:
+ *      pDevice   -
+ *      param     -
+ *  Out:
+ *
+ * Return Value:
+ *
+ */
+static int hostap_remove_sta(PSDevice pDevice,
+				     struct viawget_hostapd_param *param)
+{
+	UINT uNodeIndex;
+
+
+    if (BSSDBbIsSTAInNodeDB(pDevice->pMgmt, param->sta_addr, &uNodeIndex)) {
+        BSSvRemoveOneNode(pDevice, uNodeIndex);
+    }
+    else {
+        return -ENOENT;
+    }
+	return 0;
+}
+
+/*
+ * Description:
+ *      add a station from hostap deamon
+ *
+ * Parameters:
+ *  In:
+ *      pDevice   -
+ *      param     -
+ *  Out:
+ *
+ * Return Value:
+ *
+ */
+static int hostap_add_sta(PSDevice pDevice,
+				  struct viawget_hostapd_param *param)
+{
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+	UINT uNodeIndex;
+
+
+    if (!BSSDBbIsSTAInNodeDB(pMgmt, param->sta_addr, &uNodeIndex)) {
+        BSSvCreateOneNode((PSDevice)pDevice, &uNodeIndex);
+    }
+    memcpy(pMgmt->sNodeDBTable[uNodeIndex].abyMACAddr, param->sta_addr, WLAN_ADDR_LEN);
+    pMgmt->sNodeDBTable[uNodeIndex].eNodeState = NODE_ASSOC;
+    pMgmt->sNodeDBTable[uNodeIndex].wCapInfo = param->u.add_sta.capability;
+// TODO listenInterval
+//    pMgmt->sNodeDBTable[uNodeIndex].wListenInterval = 1;
+    pMgmt->sNodeDBTable[uNodeIndex].bPSEnable = FALSE;
+    pMgmt->sNodeDBTable[uNodeIndex].bySuppRate = param->u.add_sta.tx_supp_rates;
+
+    // set max tx rate
+    pMgmt->sNodeDBTable[uNodeIndex].wTxDataRate =
+           pMgmt->sNodeDBTable[uNodeIndex].wMaxSuppRate;
+    // set max basic rate
+    pMgmt->sNodeDBTable[uNodeIndex].wMaxBasicRate = RATE_2M;
+    // Todo: check sta preamble, if ap can't support, set status code
+    pMgmt->sNodeDBTable[uNodeIndex].bShortPreamble =
+            WLAN_GET_CAP_INFO_SHORTPREAMBLE(pMgmt->sNodeDBTable[uNodeIndex].wCapInfo);
+
+    pMgmt->sNodeDBTable[uNodeIndex].wAID = (WORD)param->u.add_sta.aid;
+#ifdef PRIVATE_OBJ
+    pMgmt->sNodeDBTable[uNodeIndex].ulLastRxJiffer = get_jiffies();
+#else
+    pMgmt->sNodeDBTable[uNodeIndex].ulLastRxJiffer = jiffies;
+#endif
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Add STA AID= %d \n", pMgmt->sNodeDBTable[uNodeIndex].wAID);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "MAC=%2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X \n",
+               param->sta_addr[0],
+               param->sta_addr[1],
+               param->sta_addr[2],
+               param->sta_addr[3],
+               param->sta_addr[4],
+               param->sta_addr[5]
+              ) ;
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Max Support rate = %d \n",
+               pMgmt->sNodeDBTable[uNodeIndex].wMaxSuppRate);
+
+	return 0;
+}
+
+/*
+ * Description:
+ *      get station info
+ *
+ * Parameters:
+ *  In:
+ *      pDevice   -
+ *      param     -
+ *  Out:
+ *
+ * Return Value:
+ *
+ */
+
+static int hostap_get_info_sta(PSDevice pDevice,
+				       struct viawget_hostapd_param *param)
+{
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+	UINT uNodeIndex;
+
+    if (BSSDBbIsSTAInNodeDB(pMgmt, param->sta_addr, &uNodeIndex)) {
+#ifdef PRIVATE_OBJ
+	    param->u.get_info_sta.inactive_sec =
+	        (get_jiffies() - pMgmt->sNodeDBTable[uNodeIndex].ulLastRxJiffer) / HZ;
+#else
+	    param->u.get_info_sta.inactive_sec =
+	        (jiffies - pMgmt->sNodeDBTable[uNodeIndex].ulLastRxJiffer) / HZ;
+#endif
+	    //param->u.get_info_sta.txexc = pMgmt->sNodeDBTable[uNodeIndex].uTxAttempts;
+	}
+	else {
+	    return -ENOENT;
+	}
+
+	return 0;
+}
+
+/*
+ * Description:
+ *      reset txexec
+ *
+ * Parameters:
+ *  In:
+ *      pDevice   -
+ *      param     -
+ *  Out:
+ *      TURE, FALSE
+ *
+ * Return Value:
+ *
+ */
+/*
+static int hostap_reset_txexc_sta(PSDevice pDevice,
+					  struct viawget_hostapd_param *param)
+{
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+	UINT uNodeIndex;
+
+    if (BSSDBbIsSTAInNodeDB(pMgmt, param->sta_addr, &uNodeIndex)) {
+        pMgmt->sNodeDBTable[uNodeIndex].uTxAttempts = 0;
+	}
+	else {
+	    return -ENOENT;
+	}
+
+	return 0;
+}
+*/
+
+/*
+ * Description:
+ *      set station flag
+ *
+ * Parameters:
+ *  In:
+ *      pDevice   -
+ *      param     -
+ *  Out:
+ *
+ * Return Value:
+ *
+ */
+static int hostap_set_flags_sta(PSDevice pDevice,
+					struct viawget_hostapd_param *param)
+{
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+	UINT uNodeIndex;
+
+    if (BSSDBbIsSTAInNodeDB(pMgmt, param->sta_addr, &uNodeIndex)) {
+		pMgmt->sNodeDBTable[uNodeIndex].dwFlags |= param->u.set_flags_sta.flags_or;
+		pMgmt->sNodeDBTable[uNodeIndex].dwFlags &= param->u.set_flags_sta.flags_and;
+		DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " dwFlags = %x \n",
+		            (UINT)pMgmt->sNodeDBTable[uNodeIndex].dwFlags);
+	}
+	else {
+	    return -ENOENT;
+	}
+
+	return 0;
+}
+
+
+
+/*
+ * Description:
+ *      set generic element (wpa ie)
+ *
+ * Parameters:
+ *  In:
+ *      pDevice   -
+ *      param     -
+ *  Out:
+ *
+ * Return Value:
+ *
+ */
+static int hostap_set_generic_element(PSDevice pDevice,
+					struct viawget_hostapd_param *param)
+{
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+
+
+
+    memcpy( pMgmt->abyWPAIE,
+            param->u.generic_elem.data,
+            param->u.generic_elem.len
+           );
+
+    pMgmt->wWPAIELen = 	param->u.generic_elem.len;
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pMgmt->wWPAIELen = %d\n",  pMgmt->wWPAIELen);
+
+    // disable wpa
+    if (pMgmt->wWPAIELen == 0) {
+        pMgmt->eAuthenMode = WMAC_AUTH_OPEN;
+		DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " No WPAIE, Disable WPA \n");
+    } else  {
+        // enable wpa
+        if ((pMgmt->abyWPAIE[0] == WLAN_EID_RSN_WPA) ||
+             (pMgmt->abyWPAIE[0] == WLAN_EID_RSN)) {
+              pMgmt->eAuthenMode = WMAC_AUTH_WPANONE;
+               DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Set WPAIE enable WPA\n");
+        } else
+            return -EINVAL;
+    }
+
+	return 0;
+}
+
+/*
+ * Description:
+ *      flush station nodes table.
+ *
+ * Parameters:
+ *  In:
+ *      pDevice   -
+ *  Out:
+ *
+ * Return Value:
+ *
+ */
+
+static void hostap_flush_sta(PSDevice pDevice)
+{
+    // reserved node index =0 for multicast node.
+    BSSvClearNodeDBTable(pDevice, 1);
+    pDevice->uAssocCount = 0;
+
+    return;
+}
+
+/*
+ * Description:
+ *      set each stations encryption key
+ *
+ * Parameters:
+ *  In:
+ *      pDevice   -
+ *      param     -
+ *  Out:
+ *
+ * Return Value:
+ *
+ */
+static int hostap_set_encryption(PSDevice pDevice,
+				       struct viawget_hostapd_param *param,
+				       int param_len)
+{
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+    DWORD   dwKeyIndex = 0;
+    BYTE    abyKey[MAX_KEY_LEN];
+    BYTE    abySeq[MAX_KEY_LEN];
+    NDIS_802_11_KEY_RSC   KeyRSC;
+    BYTE    byKeyDecMode = KEY_CTL_WEP;
+	int     ret = 0;
+	int     iNodeIndex = -1;
+	int     ii;
+	BOOL    bKeyTableFull = FALSE;
+	WORD    wKeyCtl = 0;
+
+
+	param->u.crypt.err = 0;
+/*
+	if (param_len !=
+	    (int) ((char *) param->u.crypt.key - (char *) param) +
+	    param->u.crypt.key_len)
+		return -EINVAL;
+*/
+
+	if (param->u.crypt.alg > WPA_ALG_CCMP)
+		return -EINVAL;
+
+
+	if ((param->u.crypt.idx > 3) || (param->u.crypt.key_len > MAX_KEY_LEN)) {
+		param->u.crypt.err = HOSTAP_CRYPT_ERR_KEY_SET_FAILED;
+		DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " HOSTAP_CRYPT_ERR_KEY_SET_FAILED\n");
+		return -EINVAL;
+	}
+
+	if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
+	    param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
+	    param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) {
+		if (param->u.crypt.idx >= MAX_GROUP_KEY)
+			return -EINVAL;
+        iNodeIndex = 0;
+
+	} else {
+	    if (BSSDBbIsSTAInNodeDB(pMgmt, param->sta_addr, &iNodeIndex) == FALSE) {
+	        param->u.crypt.err = HOSTAP_CRYPT_ERR_UNKNOWN_ADDR;
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " HOSTAP_CRYPT_ERR_UNKNOWN_ADDR\n");
+	        return -EINVAL;
+	    }
+	}
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " hostap_set_encryption: sta_index %d \n", iNodeIndex);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " hostap_set_encryption: alg %d \n", param->u.crypt.alg);
+
+	if (param->u.crypt.alg == WPA_ALG_NONE) {
+
+        if (pMgmt->sNodeDBTable[iNodeIndex].bOnFly == TRUE) {
+            if (KeybRemoveKey(&(pDevice->sKey),
+                                param->sta_addr,
+                                pMgmt->sNodeDBTable[iNodeIndex].dwKeyIndex,
+                                pDevice->PortOffset) == FALSE) {
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "KeybRemoveKey fail \n");
+            }
+            pMgmt->sNodeDBTable[iNodeIndex].bOnFly = FALSE;
+        }
+        pMgmt->sNodeDBTable[iNodeIndex].byKeyIndex = 0;
+        pMgmt->sNodeDBTable[iNodeIndex].dwKeyIndex = 0;
+        pMgmt->sNodeDBTable[iNodeIndex].uWepKeyLength = 0;
+        pMgmt->sNodeDBTable[iNodeIndex].KeyRSC = 0;
+        pMgmt->sNodeDBTable[iNodeIndex].dwTSC47_16 = 0;
+        pMgmt->sNodeDBTable[iNodeIndex].wTSC15_0 = 0;
+        pMgmt->sNodeDBTable[iNodeIndex].byCipherSuite = 0;
+        memset(&pMgmt->sNodeDBTable[iNodeIndex].abyWepKey[0],
+                0,
+                MAX_KEY_LEN
+               );
+
+        return ret;
+	}
+
+    memcpy(abyKey, param->u.crypt.key, param->u.crypt.key_len);
+    // copy to node key tbl
+    pMgmt->sNodeDBTable[iNodeIndex].byKeyIndex = param->u.crypt.idx;
+    pMgmt->sNodeDBTable[iNodeIndex].uWepKeyLength = param->u.crypt.key_len;
+    memcpy(&pMgmt->sNodeDBTable[iNodeIndex].abyWepKey[0],
+            param->u.crypt.key,
+            param->u.crypt.key_len
+           );
+
+    dwKeyIndex = (DWORD)(param->u.crypt.idx);
+    if (param->u.crypt.flags & HOSTAP_CRYPT_FLAG_SET_TX_KEY) {
+        pDevice->byKeyIndex = (BYTE)dwKeyIndex;
+        pDevice->bTransmitKey = TRUE;
+        dwKeyIndex |= (1 << 31);
+    }
+
+	if (param->u.crypt.alg == WPA_ALG_WEP) {
+
+        if ((pDevice->bEnable8021x == FALSE) || (iNodeIndex == 0)) {
+            KeybSetDefaultKey(&(pDevice->sKey),
+                                dwKeyIndex & ~(BIT30 | USE_KEYRSC),
+                                param->u.crypt.key_len,
+                                NULL,
+                                abyKey,
+                                KEY_CTL_WEP,
+                                pDevice->PortOffset,
+                                pDevice->byLocalID);
+
+        } else {
+            // 8021x enable, individual key
+            dwKeyIndex |= (1 << 30); // set pairwise key
+            if (KeybSetKey(&(pDevice->sKey),
+                           &param->sta_addr[0],
+                           dwKeyIndex & ~(USE_KEYRSC),
+                           param->u.crypt.key_len,
+                           (PQWORD) &(KeyRSC),
+                           (PBYTE)abyKey,
+                            KEY_CTL_WEP,
+                            pDevice->PortOffset,
+                            pDevice->byLocalID) == TRUE) {
+
+                pMgmt->sNodeDBTable[iNodeIndex].bOnFly = TRUE;
+
+            } else {
+                // Key Table Full
+                pMgmt->sNodeDBTable[iNodeIndex].bOnFly = FALSE;
+                bKeyTableFull = TRUE;
+            }
+        }
+        pDevice->eEncryptionStatus = Ndis802_11Encryption1Enabled;
+        pDevice->bEncryptionEnable = TRUE;
+        pMgmt->byCSSPK = KEY_CTL_WEP;
+        pMgmt->byCSSGK = KEY_CTL_WEP;
+        pMgmt->sNodeDBTable[iNodeIndex].byCipherSuite = KEY_CTL_WEP;
+        pMgmt->sNodeDBTable[iNodeIndex].dwKeyIndex = dwKeyIndex;
+        return ret;
+	}
+
+	if (param->u.crypt.seq) {
+	    memcpy(&abySeq, param->u.crypt.seq, 8);
+		for (ii = 0 ; ii < 8 ; ii++) {
+	         KeyRSC |= (abySeq[ii] << (ii * 8));
+		}
+		dwKeyIndex |= 1 << 29;
+		pMgmt->sNodeDBTable[iNodeIndex].KeyRSC = KeyRSC;
+	}
+
+	if (param->u.crypt.alg == WPA_ALG_TKIP) {
+	    if (param->u.crypt.key_len != MAX_KEY_LEN)
+	        return -EINVAL;
+	    pDevice->eEncryptionStatus = Ndis802_11Encryption2Enabled;
+        byKeyDecMode = KEY_CTL_TKIP;
+        pMgmt->byCSSPK = KEY_CTL_TKIP;
+        pMgmt->byCSSGK = KEY_CTL_TKIP;
+	}
+
+	if (param->u.crypt.alg == WPA_ALG_CCMP) {
+	    if ((param->u.crypt.key_len != AES_KEY_LEN) ||
+	        (pDevice->byLocalID <= REV_ID_VT3253_A1))
+	        return -EINVAL;
+        pDevice->eEncryptionStatus = Ndis802_11Encryption3Enabled;
+        byKeyDecMode = KEY_CTL_CCMP;
+        pMgmt->byCSSPK = KEY_CTL_CCMP;
+        pMgmt->byCSSGK = KEY_CTL_CCMP;
+    }
+
+
+    if (iNodeIndex == 0) {
+       KeybSetDefaultKey(&(pDevice->sKey),
+                           dwKeyIndex,
+                           param->u.crypt.key_len,
+                           (PQWORD) &(KeyRSC),
+                           abyKey,
+                           byKeyDecMode,
+                           pDevice->PortOffset,
+                           pDevice->byLocalID);
+       pMgmt->sNodeDBTable[iNodeIndex].bOnFly = TRUE;
+
+    } else {
+        dwKeyIndex |= (1 << 30); // set pairwise key
+        if (KeybSetKey(&(pDevice->sKey),
+                       &param->sta_addr[0],
+                       dwKeyIndex,
+                       param->u.crypt.key_len,
+                       (PQWORD) &(KeyRSC),
+                       (PBYTE)abyKey,
+                        byKeyDecMode,
+                        pDevice->PortOffset,
+                        pDevice->byLocalID) == TRUE) {
+
+            pMgmt->sNodeDBTable[iNodeIndex].bOnFly = TRUE;
+
+        } else {
+            // Key Table Full
+            pMgmt->sNodeDBTable[iNodeIndex].bOnFly = FALSE;
+            bKeyTableFull = TRUE;
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " Key Table Full\n");
+        }
+
+    }
+
+    if (bKeyTableFull == TRUE) {
+        wKeyCtl &= 0x7F00;              // clear all key control filed
+        wKeyCtl |= (byKeyDecMode << 4);
+        wKeyCtl |= (byKeyDecMode);
+        wKeyCtl |= 0x0044;              // use group key for all address
+        wKeyCtl |= 0x4000;              // disable KeyTable[MAX_KEY_TABLE-1] on-fly to genernate rx int
+        MACvSetDefaultKeyCtl(pDevice->PortOffset, wKeyCtl, MAX_KEY_TABLE-1, pDevice->byLocalID);
+    }
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " Set key sta_index= %d \n", iNodeIndex);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " tx_index=%d len=%d \n", param->u.crypt.idx,
+               param->u.crypt.key_len );
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " key=%x-%x-%x-%x-%x-xxxxx \n",
+               pMgmt->sNodeDBTable[iNodeIndex].abyWepKey[0],
+               pMgmt->sNodeDBTable[iNodeIndex].abyWepKey[1],
+               pMgmt->sNodeDBTable[iNodeIndex].abyWepKey[2],
+               pMgmt->sNodeDBTable[iNodeIndex].abyWepKey[3],
+               pMgmt->sNodeDBTable[iNodeIndex].abyWepKey[4]
+              );
+
+	// set wep key
+    pDevice->bEncryptionEnable = TRUE;
+    pMgmt->sNodeDBTable[iNodeIndex].byCipherSuite = byKeyDecMode;
+    pMgmt->sNodeDBTable[iNodeIndex].dwKeyIndex = dwKeyIndex;
+    pMgmt->sNodeDBTable[iNodeIndex].dwTSC47_16 = 0;
+    pMgmt->sNodeDBTable[iNodeIndex].wTSC15_0 = 0;
+
+	return ret;
+}
+
+
+
+/*
+ * Description:
+ *      get each stations encryption key
+ *
+ * Parameters:
+ *  In:
+ *      pDevice   -
+ *      param     -
+ *  Out:
+ *
+ * Return Value:
+ *
+ */
+static int hostap_get_encryption(PSDevice pDevice,
+				       struct viawget_hostapd_param *param,
+				       int param_len)
+{
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+	int     ret = 0;
+	int     ii;
+	int     iNodeIndex =0;
+
+
+	param->u.crypt.err = 0;
+
+	if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
+	    param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
+	    param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) {
+        iNodeIndex = 0;
+	} else {
+	    if (BSSDBbIsSTAInNodeDB(pMgmt, param->sta_addr, &iNodeIndex) == FALSE) {
+	        param->u.crypt.err = HOSTAP_CRYPT_ERR_UNKNOWN_ADDR;
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "hostap_get_encryption: HOSTAP_CRYPT_ERR_UNKNOWN_ADDR\n");
+	        return -EINVAL;
+	    }
+	}
+	DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "hostap_get_encryption: %d\n", iNodeIndex);
+    memset(param->u.crypt.seq, 0, 8);
+    for (ii = 0 ; ii < 8 ; ii++) {
+        param->u.crypt.seq[ii] = (BYTE)pMgmt->sNodeDBTable[iNodeIndex].KeyRSC >> (ii * 8);
+    }
+
+	return ret;
+}
+
+
+/*
+ * Description:
+ *      hostap_ioctl main function supported for hostap deamon.
+ *
+ * Parameters:
+ *  In:
+ *      pDevice   -
+ *      iw_point  -
+ *  Out:
+ *
+ * Return Value:
+ *
+ */
+
+int hostap_ioctl(PSDevice pDevice, struct iw_point *p)
+{
+	struct viawget_hostapd_param *param;
+	int ret = 0;
+	int ap_ioctl = 0;
+
+	if (p->length < sizeof(struct viawget_hostapd_param) ||
+	    p->length > VIAWGET_HOSTAPD_MAX_BUF_SIZE || !p->pointer)
+		return -EINVAL;
+
+	param = (struct viawget_hostapd_param *) kmalloc((int)p->length, (int)GFP_KERNEL);
+	if (param == NULL)
+		return -ENOMEM;
+
+	if (copy_from_user(param, p->pointer, p->length)) {
+		ret = -EFAULT;
+		goto out;
+	}
+
+	switch (param->cmd) {
+	case VIAWGET_HOSTAPD_SET_ENCRYPTION:
+	    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_HOSTAPD_SET_ENCRYPTION \n");
+        spin_lock_irq(&pDevice->lock);
+		ret = hostap_set_encryption(pDevice, param, p->length);
+        spin_unlock_irq(&pDevice->lock);
+		break;
+	case VIAWGET_HOSTAPD_GET_ENCRYPTION:
+	    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_HOSTAPD_GET_ENCRYPTION \n");
+        spin_lock_irq(&pDevice->lock);
+		ret = hostap_get_encryption(pDevice, param, p->length);
+        spin_unlock_irq(&pDevice->lock);
+		break;
+	case VIAWGET_HOSTAPD_SET_ASSOC_AP_ADDR:
+	    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_HOSTAPD_SET_ASSOC_AP_ADDR \n");
+		return -EOPNOTSUPP;
+		break;
+	case VIAWGET_HOSTAPD_FLUSH:
+	    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_HOSTAPD_FLUSH \n");
+        spin_lock_irq(&pDevice->lock);
+    	hostap_flush_sta(pDevice);
+        spin_unlock_irq(&pDevice->lock);
+		break;
+	case VIAWGET_HOSTAPD_ADD_STA:
+	    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_HOSTAPD_ADD_STA \n");
+         spin_lock_irq(&pDevice->lock);
+		 ret = hostap_add_sta(pDevice, param);
+         spin_unlock_irq(&pDevice->lock);
+		break;
+	case VIAWGET_HOSTAPD_REMOVE_STA:
+	    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_HOSTAPD_REMOVE_STA \n");
+         spin_lock_irq(&pDevice->lock);
+		 ret = hostap_remove_sta(pDevice, param);
+         spin_unlock_irq(&pDevice->lock);
+		break;
+	case VIAWGET_HOSTAPD_GET_INFO_STA:
+	    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_HOSTAPD_GET_INFO_STA \n");
+		 ret = hostap_get_info_sta(pDevice, param);
+		 ap_ioctl = 1;
+		break;
+/*
+	case VIAWGET_HOSTAPD_RESET_TXEXC_STA:
+	    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_HOSTAPD_RESET_TXEXC_STA \n");
+		 ret = hostap_reset_txexc_sta(pDevice, param);
+		break;
+*/
+	case VIAWGET_HOSTAPD_SET_FLAGS_STA:
+	    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_HOSTAPD_SET_FLAGS_STA \n");
+		 ret = hostap_set_flags_sta(pDevice, param);
+		break;
+
+	case VIAWGET_HOSTAPD_MLME:
+	    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_HOSTAPD_MLME \n");
+	    return -EOPNOTSUPP;
+
+	case VIAWGET_HOSTAPD_SET_GENERIC_ELEMENT:
+	    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_HOSTAPD_SET_GENERIC_ELEMENT \n");
+		ret = hostap_set_generic_element(pDevice, param);
+		break;
+
+	case VIAWGET_HOSTAPD_SCAN_REQ:
+	    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_HOSTAPD_SCAN_REQ \n");
+	    return -EOPNOTSUPP;
+
+	case VIAWGET_HOSTAPD_STA_CLEAR_STATS:
+	    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_HOSTAPD_STA_CLEAR_STATS \n");
+	    return -EOPNOTSUPP;
+
+	default:
+	    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "hostap_ioctl: unknown cmd=%d\n",
+		       (int)param->cmd);
+		return -EOPNOTSUPP;
+		break;
+	}
+
+
+	if ((ret == 0) && ap_ioctl) {
+		if (copy_to_user(p->pointer, param, p->length)) {
+			ret = -EFAULT;
+			goto out;
+		}
+	}
+
+ out:
+	if (param != NULL)
+		kfree(param);
+
+	return ret;
+}
+
diff --git a/drivers/staging/vt6655/hostap.h b/drivers/staging/vt6655/hostap.h
new file mode 100644
index 00000000000..1fcb2f0788b
--- /dev/null
+++ b/drivers/staging/vt6655/hostap.h
@@ -0,0 +1,94 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: hostap.h
+ *
+ * Purpose:
+ *
+ * Author: Lyndon Chen
+ *
+ * Date: May 21, 2003
+ *
+ */
+
+
+#ifndef __HOSTAP_H__
+#define __HOSTAP_H__
+
+#if !defined(__DEVICE_H__)
+#include "device.h"
+#endif
+
+
+/*---------------------  Export Definitions -------------------------*/
+
+#if WIRELESS_EXT < 9
+struct iw_point {
+	caddr_t pointer;
+	__u16 length;
+	__u16 flags;
+};
+#endif /* WIRELESS_EXT < 9 */
+
+#define WLAN_RATE_1M    BIT0
+#define WLAN_RATE_2M    BIT1
+#define WLAN_RATE_5M5   BIT2
+#define WLAN_RATE_11M   BIT3
+#define WLAN_RATE_6M    BIT4
+#define WLAN_RATE_9M    BIT5
+#define WLAN_RATE_12M   BIT6
+#define WLAN_RATE_18M   BIT7
+#define WLAN_RATE_24M   BIT8
+#define WLAN_RATE_36M   BIT9
+#define WLAN_RATE_48M   BIT10
+#define WLAN_RATE_54M   BIT11
+
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+
+
+#ifdef __cplusplus
+extern "C" {                            /* Assume C declarations for C++ */
+#endif /* __cplusplus */
+
+#ifndef ETH_P_PAE
+#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
+#endif /* ETH_P_PAE */
+
+#ifndef ARPHRD_IEEE80211
+#define ARPHRD_IEEE80211 801
+#endif
+
+int hostap_set_hostapd(PSDevice pDevice, int val, int rtnl_locked);
+int hostap_ioctl(PSDevice pDevice, struct iw_point *p);
+
+#ifdef __cplusplus
+}                                       /* End of extern "C" { */
+#endif /* __cplusplus */
+
+
+
+
+#endif // __HOSTAP_H__
+
+
+
diff --git a/drivers/staging/vt6655/iocmd.h b/drivers/staging/vt6655/iocmd.h
new file mode 100644
index 00000000000..ada9ee99976
--- /dev/null
+++ b/drivers/staging/vt6655/iocmd.h
@@ -0,0 +1,481 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: iocmd.h
+ *
+ * Purpose: Handles the viawget ioctl private interface functions
+ *
+ * Author: Lyndon Chen
+ *
+ * Date: May 8, 2002
+ *
+ */
+
+#ifndef __IOCMD_H__
+#define __IOCMD_H__
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+
+
+/*---------------------  Export Definitions -------------------------*/
+
+#if !defined(DEF)
+#define DEF
+#endif
+
+//typedef int BOOL;
+//typedef uint32_t u32;
+//typedef uint16_t u16;
+//typedef uint8_t u8;
+
+
+// ioctl Command code
+#define MAGIC_CODE	                 0x3142
+#define IOCTL_CMD_TEST	            (SIOCDEVPRIVATE + 0)
+#define IOCTL_CMD_SET			    (SIOCDEVPRIVATE + 1)
+#define IOCTL_CMD_HOSTAPD           (SIOCDEVPRIVATE + 2)
+#define IOCTL_CMD_WPA               (SIOCDEVPRIVATE + 3)
+
+
+typedef enum tagWMAC_CMD {
+
+    WLAN_CMD_BSS_SCAN,
+    WLAN_CMD_BSS_JOIN,
+    WLAN_CMD_DISASSOC,
+    WLAN_CMD_SET_WEP,
+    WLAN_CMD_GET_LINK,
+    WLAN_CMD_GET_LISTLEN,
+    WLAN_CMD_GET_LIST,
+    WLAN_CMD_GET_MIB,
+    WLAN_CMD_GET_STAT,
+    WLAN_CMD_STOP_MAC,
+    WLAN_CMD_START_MAC,
+    WLAN_CMD_AP_START,
+    WLAN_CMD_SET_HOSTAPD,
+    WLAN_CMD_SET_HOSTAPD_STA,
+    WLAN_CMD_SET_802_1X,
+    WLAN_CMD_SET_HOST_WEP,
+    WLAN_CMD_SET_WPA,
+    WLAN_CMD_GET_NODE_CNT,
+     WLAN_CMD_ZONETYPE_SET,
+    WLAN_CMD_GET_NODE_LIST
+
+} WMAC_CMD, DEF* PWMAC_CMD;
+
+	typedef enum tagWZONETYPE {
+  ZoneType_USA=0,
+  ZoneType_Japan=1,
+  ZoneType_Europe=2
+}WZONETYPE;
+
+#define ADHOC	0
+#define INFRA	1
+#define BOTH	2
+#define AP	    3
+
+#define ADHOC_STARTED	   1
+#define ADHOC_JOINTED	   2
+
+
+#define PHY80211a 	    0
+#define PHY80211b       1
+#define PHY80211g       2
+
+#define SSID_ID                0
+#define SSID_MAXLEN            32
+#define BSSID_LEN              6
+#define WEP_NKEYS              4
+#define WEP_KEYMAXLEN          29
+#define WEP_40BIT_LEN          5
+#define WEP_104BIT_LEN         13
+#define WEP_232BIT_LEN         16
+
+
+// Ioctl interface structure
+// Command structure
+//
+#pragma pack(1)
+typedef struct tagSCmdRequest {
+	U8 	    name[16];
+	void	*data;
+	U16	    wResult;
+	U16     wCmdCode;
+} SCmdRequest, *PSCmdRequest;
+
+
+//
+// Scan
+//
+
+typedef struct tagSCmdScan {
+
+    U8	    ssid[SSID_MAXLEN + 2];
+
+} SCmdScan, *PSCmdScan;
+
+
+//
+// BSS Join
+//
+
+typedef struct tagSCmdBSSJoin {
+
+    U16	    wBSSType;
+    U16     wBBPType;
+    U8	    ssid[SSID_MAXLEN + 2];
+    U32	    uChannel;
+    BOOL    bPSEnable;
+    BOOL    bShareKeyAuth;
+
+} SCmdBSSJoin, *PSCmdBSSJoin;
+
+typedef struct tagSCmdZoneTypeSet {
+
+ BOOL       bWrite;
+ WZONETYPE  ZoneType;
+
+} SCmdZoneTypeSet, *PSCmdZoneTypeSet;
+
+#ifdef WPA_SM_Transtatus
+typedef struct tagSWPAResult {
+         char	ifname[100];
+         U8		proto;
+         U8   key_mgmt;
+         U8   eap_type;
+         BOOL authenticated;
+} SWPAResult, *PSWPAResult;
+#endif
+
+
+typedef struct tagSCmdStartAP {
+
+    U16	    wBSSType;
+    U16     wBBPType;
+    U8	    ssid[SSID_MAXLEN + 2];
+    U32 	uChannel;
+    U32     uBeaconInt;
+    BOOL    bShareKeyAuth;
+    U8      byBasicRate;
+
+} SCmdStartAP, *PSCmdStartAP;
+
+
+typedef struct tagSCmdSetWEP {
+
+    BOOL    bEnableWep;
+    U8      byKeyIndex;
+    U8      abyWepKey[WEP_NKEYS][WEP_KEYMAXLEN];
+    BOOL    bWepKeyAvailable[WEP_NKEYS];
+    U32     auWepKeyLength[WEP_NKEYS];
+
+} SCmdSetWEP, *PSCmdSetWEP;
+
+
+
+typedef struct tagSBSSIDItem {
+
+	U32	    uChannel;
+    U8      abyBSSID[BSSID_LEN];
+    U8      abySSID[SSID_MAXLEN + 1];
+    //2006-1116-01,<Modify> by NomadZhao
+    //U16	    wBeaconInterval;
+    //U16	    wCapInfo;
+    //U8      byNetType;
+    U8      byNetType;
+    U16	    wBeaconInterval;
+    U16	    wCapInfo;        // for address of byNetType at align 4
+
+    BOOL    bWEPOn;
+    U32     uRSSI;
+
+} SBSSIDItem;
+
+
+typedef struct tagSBSSIDList {
+
+	U32		    uItem;
+	SBSSIDItem	sBSSIDList[0];
+} SBSSIDList, *PSBSSIDList;
+
+
+typedef struct tagSCmdLinkStatus {
+
+    BOOL    bLink;
+	U16	    wBSSType;
+	U8      byState;
+    U8      abyBSSID[BSSID_LEN];
+    U8      abySSID[SSID_MAXLEN + 2];
+    U32     uChannel;
+    U32     uLinkRate;
+
+} SCmdLinkStatus, *PSCmdLinkStatus;
+
+//
+// 802.11 counter
+//
+typedef struct tagSDot11MIBCount {
+    U32 TransmittedFragmentCount;
+    U32 MulticastTransmittedFrameCount;
+    U32 FailedCount;
+    U32 RetryCount;
+    U32 MultipleRetryCount;
+    U32 RTSSuccessCount;
+    U32 RTSFailureCount;
+    U32 ACKFailureCount;
+    U32 FrameDuplicateCount;
+    U32 ReceivedFragmentCount;
+    U32 MulticastReceivedFrameCount;
+    U32 FCSErrorCount;
+} SDot11MIBCount, DEF* PSDot11MIBCount;
+
+
+
+//
+// statistic counter
+//
+typedef struct tagSStatMIBCount {
+    //
+    // ISR status count
+    //
+    U32   dwIsrTx0OK;
+    U32   dwIsrTx1OK;
+    U32   dwIsrBeaconTxOK;
+    U32   dwIsrRxOK;
+    U32   dwIsrTBTTInt;
+    U32   dwIsrSTIMERInt;
+    U32   dwIsrUnrecoverableError;
+    U32   dwIsrSoftInterrupt;
+    U32   dwIsrRxNoBuf;
+    /////////////////////////////////////
+
+    U32   dwIsrUnknown;               // unknown interrupt count
+
+    // RSR status count
+    //
+    U32   dwRsrFrmAlgnErr;
+    U32   dwRsrErr;
+    U32   dwRsrCRCErr;
+    U32   dwRsrCRCOk;
+    U32   dwRsrBSSIDOk;
+    U32   dwRsrADDROk;
+    U32   dwRsrICVOk;
+    U32   dwNewRsrShortPreamble;
+    U32   dwRsrLong;
+    U32   dwRsrRunt;
+
+    U32   dwRsrRxControl;
+    U32   dwRsrRxData;
+    U32   dwRsrRxManage;
+
+    U32   dwRsrRxPacket;
+    U32   dwRsrRxOctet;
+    U32   dwRsrBroadcast;
+    U32   dwRsrMulticast;
+    U32   dwRsrDirected;
+    // 64-bit OID
+    U32   ullRsrOK;
+
+    // for some optional OIDs (64 bits) and DMI support
+    U32   ullRxBroadcastBytes;
+    U32   ullRxMulticastBytes;
+    U32   ullRxDirectedBytes;
+    U32   ullRxBroadcastFrames;
+    U32   ullRxMulticastFrames;
+    U32   ullRxDirectedFrames;
+
+    U32   dwRsrRxFragment;
+    U32   dwRsrRxFrmLen64;
+    U32   dwRsrRxFrmLen65_127;
+    U32   dwRsrRxFrmLen128_255;
+    U32   dwRsrRxFrmLen256_511;
+    U32   dwRsrRxFrmLen512_1023;
+    U32   dwRsrRxFrmLen1024_1518;
+
+    // TSR0,1 status count
+    //
+    U32   dwTsrTotalRetry[2];        // total collision retry count
+    U32   dwTsrOnceRetry[2];         // this packet only occur one collision
+    U32   dwTsrMoreThanOnceRetry[2]; // this packet occur more than one collision
+    U32   dwTsrRetry[2];             // this packet has ever occur collision,
+                                       // that is (dwTsrOnceCollision0 + dwTsrMoreThanOnceCollision0)
+    U32   dwTsrACKData[2];
+    U32   dwTsrErr[2];
+    U32   dwAllTsrOK[2];
+    U32   dwTsrRetryTimeout[2];
+    U32   dwTsrTransmitTimeout[2];
+
+    U32   dwTsrTxPacket[2];
+    U32   dwTsrTxOctet[2];
+    U32   dwTsrBroadcast[2];
+    U32   dwTsrMulticast[2];
+    U32   dwTsrDirected[2];
+
+    // RD/TD count
+    U32   dwCntRxFrmLength;
+    U32   dwCntTxBufLength;
+
+    U8    abyCntRxPattern[16];
+    U8    abyCntTxPattern[16];
+
+    // Software check....
+    U32   dwCntRxDataErr;             // rx buffer data software compare CRC err count
+    U32   dwCntDecryptErr;            // rx buffer data software compare CRC err count
+    U32   dwCntRxICVErr;              // rx buffer data software compare CRC err count
+    U32    idxRxErrorDesc;             // index for rx data error RD
+
+    // 64-bit OID
+    U32   ullTsrOK[2];
+
+    // for some optional OIDs (64 bits) and DMI support
+    U32   ullTxBroadcastFrames[2];
+    U32   ullTxMulticastFrames[2];
+    U32   ullTxDirectedFrames[2];
+    U32   ullTxBroadcastBytes[2];
+    U32   ullTxMulticastBytes[2];
+    U32   ullTxDirectedBytes[2];
+} SStatMIBCount, DEF* PSStatMIBCount;
+
+
+typedef struct tagSNodeItem {
+    // STA info
+    U16            wAID;
+    U8             abyMACAddr[6];
+    U16            wTxDataRate;
+    U16            wInActiveCount;
+    U16            wEnQueueCnt;
+    U16            wFlags;
+    BOOL           bPWBitOn;
+    U8             byKeyIndex;
+    U16            wWepKeyLength;
+    U8            abyWepKey[WEP_KEYMAXLEN];
+    // Auto rate fallback vars
+    BOOL           bIsInFallback;
+    U32            uTxFailures;
+    U32            uTxAttempts;
+    U16            wFailureRatio;
+
+} SNodeItem;
+
+
+typedef struct tagSNodeList {
+
+	U32		    uItem;
+	SNodeItem	sNodeList[0];
+
+} SNodeList, *PSNodeList;
+
+
+
+typedef struct tagSCmdValue {
+
+    U32     dwValue;
+
+} SCmdValue,  *PSCmdValue;
+
+
+//
+// hostapd & viawget ioctl related
+//
+
+
+// VIAGWET_IOCTL_HOSTAPD ioctl() cmd:
+enum {
+	VIAWGET_HOSTAPD_FLUSH = 1,
+	VIAWGET_HOSTAPD_ADD_STA = 2,
+	VIAWGET_HOSTAPD_REMOVE_STA = 3,
+	VIAWGET_HOSTAPD_GET_INFO_STA = 4,
+	VIAWGET_HOSTAPD_SET_ENCRYPTION = 5,
+	VIAWGET_HOSTAPD_GET_ENCRYPTION = 6,
+	VIAWGET_HOSTAPD_SET_FLAGS_STA = 7,
+	VIAWGET_HOSTAPD_SET_ASSOC_AP_ADDR = 8,
+	VIAWGET_HOSTAPD_SET_GENERIC_ELEMENT = 9,
+	VIAWGET_HOSTAPD_MLME = 10,
+	VIAWGET_HOSTAPD_SCAN_REQ = 11,
+	VIAWGET_HOSTAPD_STA_CLEAR_STATS = 12,
+};
+
+
+#define VIAWGET_HOSTAPD_GENERIC_ELEMENT_HDR_LEN \
+((int) (&((struct viawget_hostapd_param *) 0)->u.generic_elem.data))
+
+// Maximum length for algorithm names (-1 for nul termination) used in ioctl()
+
+
+
+struct viawget_hostapd_param {
+	U32 cmd;
+	U8 sta_addr[6];
+	union {
+		struct {
+			U16 aid;
+			U16 capability;
+			U8 tx_supp_rates;
+		} add_sta;
+		struct {
+			U32 inactive_sec;
+		} get_info_sta;
+		struct {
+			U8 alg;
+			U32 flags;
+			U32 err;
+			U8 idx;
+			U8 seq[8];
+			U16 key_len;
+			U8 key[0];
+		} crypt;
+		struct {
+			U32 flags_and;
+			U32 flags_or;
+		} set_flags_sta;
+		struct {
+			U16 rid;
+			U16 len;
+			U8 data[0];
+		} rid;
+		struct {
+			U8 len;
+			U8 data[0];
+		} generic_elem;
+		struct {
+			U16 cmd;
+			U16 reason_code;
+		} mlme;
+		struct {
+			U8 ssid_len;
+			U8 ssid[32];
+		} scan_req;
+	} u;
+};
+
+//2006-1116-01,<Add> by NomadZhao
+#pragma pack()
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+
+/*---------------------  Export Types  ------------------------------*/
+
+
+/*---------------------  Export Functions  --------------------------*/
+
+
+
+#endif //__IOCMD_H__
diff --git a/drivers/staging/vt6655/ioctl.c b/drivers/staging/vt6655/ioctl.c
new file mode 100644
index 00000000000..4869107a2bc
--- /dev/null
+++ b/drivers/staging/vt6655/ioctl.c
@@ -0,0 +1,775 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: ioctl.c
+ *
+ * Purpose:  private ioctl functions
+ *
+ * Author: Lyndon Chen
+ *
+ * Date: Auguest 20, 2003
+ *
+ * Functions:
+ *
+ * Revision History:
+ *
+ */
+
+
+#if !defined(__IOCTL_H__)
+#include "ioctl.h"
+#endif
+#if !defined(__IOCMD_H__)
+#include "iocmd.h"
+#endif
+#if !defined(__MAC_H__)
+#include "mac.h"
+#endif
+#if !defined(__CARD_H__)
+#include "card.h"
+#endif
+#if !defined(__HOSTAP_H__)
+#include "hostap.h"
+#endif
+#if !defined(__UMEM_H__)
+#include "umem.h"
+#endif
+#if !defined(__WPACTL_H__)
+#include "wpactl.h"
+#endif
+#if !defined(__RF_H__)
+#include "rf.h"
+#endif
+
+
+/*---------------------  Static Definitions -------------------------*/
+
+/*---------------------  Static Classes  ----------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+//static int          msglevel                =MSG_LEVEL_DEBUG;
+static int          msglevel                =MSG_LEVEL_INFO;
+
+/*---------------------  Static Functions  --------------------------*/
+
+#ifdef WPA_SM_Transtatus
+    SWPAResult wpa_Result;
+#endif
+
+
+/*---------------------  Export Variables  --------------------------*/
+
+int private_ioctl(PSDevice pDevice, struct ifreq *rq) {
+
+	PSCmdRequest        pReq = (PSCmdRequest)rq;
+    PSMgmtObject        pMgmt = pDevice->pMgmt;
+	int 		        result = 0;
+    PWLAN_IE_SSID       pItemSSID;
+    SCmdBSSJoin         sJoinCmd;
+    SCmdZoneTypeSet  sZoneTypeCmd;
+    SCmdScan            sScanCmd;
+    SCmdStartAP         sStartAPCmd;
+    SCmdSetWEP          sWEPCmd;
+    SCmdValue           sValue;
+    SBSSIDList          sList;
+    SNodeList           sNodeList;
+    PSBSSIDList         pList;
+    PSNodeList          pNodeList;
+    UINT                cbListCount;
+    PKnownBSS           pBSS;
+    PKnownNodeDB        pNode;
+    UINT                ii, jj;
+    SCmdLinkStatus      sLinkStatus;
+    BYTE                abySuppRates[] = {WLAN_EID_SUPP_RATES, 4, 0x02, 0x04, 0x0B, 0x16};
+    BYTE                abyNullAddr[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+    DWORD               dwKeyIndex= 0;
+    BYTE                abyScanSSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
+    LONG                ldBm;
+
+
+    pReq->wResult = 0;
+
+    switch(pReq->wCmdCode) {
+
+    case WLAN_CMD_BSS_SCAN:
+
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_BSS_SCAN..begin \n");
+        if (copy_from_user(&sScanCmd, pReq->data, sizeof(SCmdScan))) {
+			result = -EFAULT;
+			break;
+		};
+
+        pItemSSID = (PWLAN_IE_SSID)sScanCmd.ssid;
+        if (pItemSSID->len != 0) {
+            memset(abyScanSSID, 0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
+            memcpy(abyScanSSID, pItemSSID, pItemSSID->len + WLAN_IEHDR_LEN);
+        }
+
+        if (pDevice->bMACSuspend == TRUE) {
+            if (pDevice->bRadioOff == TRUE)
+                CARDbRadioPowerOn(pDevice);
+            vMgrTimerInit(pDevice);
+            MACvIntEnable(pDevice->PortOffset, IMR_MASK_VALUE);
+            add_timer(&pMgmt->sTimerSecondCallback);
+            pDevice->bMACSuspend = FALSE;
+        }
+        spin_lock_irq(&pDevice->lock);
+        if (memcmp(pMgmt->abyCurrBSSID, &abyNullAddr[0], 6) == 0)
+            BSSvClearBSSList((HANDLE)pDevice, FALSE);
+        else
+            BSSvClearBSSList((HANDLE)pDevice, pDevice->bLinkPass);
+
+        if (pItemSSID->len != 0)
+            bScheduleCommand((HANDLE) pDevice, WLAN_CMD_BSSID_SCAN, abyScanSSID);
+        else
+            bScheduleCommand((HANDLE) pDevice, WLAN_CMD_BSSID_SCAN, NULL);
+        spin_unlock_irq(&pDevice->lock);
+        break;
+
+    case WLAN_CMD_ZONETYPE_SET:
+	//mike add :cann't support.
+           result=-EOPNOTSUPP;
+	  break;
+
+        if (copy_from_user(&sZoneTypeCmd, pReq->data, sizeof(SCmdZoneTypeSet))) {
+			result = -EFAULT;
+			break;
+		};
+
+          if(sZoneTypeCmd.bWrite==TRUE) {
+	  //////write zonetype
+                if(sZoneTypeCmd.ZoneType == ZoneType_USA) {
+                  //set to USA
+                   printk("set_ZoneType:USA\n");
+		}
+                else if(sZoneTypeCmd.ZoneType == ZoneType_Japan) {
+                  //set to Japan
+                  printk("set_ZoneType:Japan\n");
+		}
+	       else if(sZoneTypeCmd.ZoneType == ZoneType_Europe) {
+                  //set to Europe
+                  printk("set_ZoneType:Europe\n");
+		}
+            }
+	else {
+          ///////read zonetype
+	  BYTE                       zonetype=0;
+
+
+           if(zonetype == 0x00)  { //USA
+             sZoneTypeCmd.ZoneType = ZoneType_USA;
+           }
+	 else if(zonetype == 0x01) { //Japan
+             sZoneTypeCmd.ZoneType = ZoneType_Japan;
+	  }
+	 else if(zonetype == 0x02) { //Europe
+             sZoneTypeCmd.ZoneType = ZoneType_Europe;
+	 }
+	 else { //Unknow ZoneType
+	        printk("Error:ZoneType[%x] Unknown ???\n",zonetype);
+	         result = -EFAULT;
+		break;
+	 }
+	   if (copy_to_user(pReq->data, &sZoneTypeCmd, sizeof(SCmdZoneTypeSet))) {
+			result = -EFAULT;
+			break;
+		};
+	}
+
+	     break;
+
+    case WLAN_CMD_BSS_JOIN:
+
+        if (pDevice->bMACSuspend == TRUE) {
+            if (pDevice->bRadioOff == TRUE)
+                CARDbRadioPowerOn(pDevice);
+            vMgrTimerInit(pDevice);
+            MACvIntEnable(pDevice->PortOffset, IMR_MASK_VALUE);
+            add_timer(&pMgmt->sTimerSecondCallback);
+            pDevice->bMACSuspend = FALSE;
+        }
+
+        if (copy_from_user(&sJoinCmd, pReq->data, sizeof(SCmdBSSJoin))) {
+			result = -EFAULT;
+			break;
+		};
+
+        pItemSSID = (PWLAN_IE_SSID)sJoinCmd.ssid;
+        memset(pMgmt->abyDesireSSID, 0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
+		memcpy(pMgmt->abyDesireSSID, pItemSSID, pItemSSID->len + WLAN_IEHDR_LEN);
+	    if (sJoinCmd.wBSSType == ADHOC) {
+	        pMgmt->eConfigMode = WMAC_CONFIG_IBSS_STA;
+	        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "ioct set to adhoc mode\n");
+	    }
+	    else {
+	        pMgmt->eConfigMode = WMAC_CONFIG_ESS_STA;
+	        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "ioct set to STA mode\n");
+	    }
+	    if (sJoinCmd.bPSEnable == TRUE) {
+            pDevice->ePSMode = WMAC_POWER_FAST;
+//            pDevice->ePSMode = WMAC_POWER_MAX;
+            pMgmt->wListenInterval = 2;
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Power Saving On\n");
+        }
+        else {
+            pDevice->ePSMode = WMAC_POWER_CAM;
+            pMgmt->wListenInterval = 1;
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Power Saving Off \n");
+        }
+
+        if (sJoinCmd.bShareKeyAuth == TRUE){
+            pMgmt->bShareKeyAlgorithm = TRUE;
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Share Key \n");
+        }
+        else {
+            pMgmt->bShareKeyAlgorithm = FALSE;
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Open System \n");
+        }
+	    pDevice->uChannel = sJoinCmd.uChannel;
+        netif_stop_queue(pDevice->dev);
+        spin_lock_irq(&pDevice->lock);
+        pMgmt->eCurrState = WMAC_STATE_IDLE;
+        bScheduleCommand((HANDLE) pDevice, WLAN_CMD_BSSID_SCAN, pMgmt->abyDesireSSID);
+        bScheduleCommand((HANDLE) pDevice, WLAN_CMD_SSID, NULL);
+        spin_unlock_irq(&pDevice->lock);
+        break;
+
+    case WLAN_CMD_SET_WEP:
+
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_SET_WEP Key. \n");
+        memset(&sWEPCmd, 0 ,sizeof(SCmdSetWEP));
+        if (copy_from_user(&sWEPCmd, pReq->data, sizeof(SCmdSetWEP))) {
+			result = -EFAULT;
+			break;
+		};
+	    if (sWEPCmd.bEnableWep != TRUE) {
+            pDevice->bEncryptionEnable = FALSE;
+            pDevice->eEncryptionStatus = Ndis802_11EncryptionDisabled;
+            MACvDisableDefaultKey(pDevice->PortOffset);
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WEP function disable. \n");
+            break;
+        }
+
+        for (ii = 0; ii < WLAN_WEP_NKEYS; ii ++) {
+            if (sWEPCmd.bWepKeyAvailable[ii]) {
+                if (ii == sWEPCmd.byKeyIndex)
+	//2006-1123-02,<Modify> by EinsnLiu
+	//Evaluate the "dwKeyIndex" error
+	//  dwKeyIndex |= (1 << 31);
+	  dwKeyIndex =ii|(1 << 31);
+                else
+                    dwKeyIndex = ii;
+
+                KeybSetDefaultKey(&(pDevice->sKey),
+                                    dwKeyIndex,
+                                    sWEPCmd.auWepKeyLength[ii],
+                                    NULL,
+                                    (PBYTE)&sWEPCmd.abyWepKey[ii][0],
+                                    KEY_CTL_WEP,
+                                    pDevice->PortOffset,
+                                    pDevice->byLocalID);
+            }
+        }
+        pDevice->byKeyIndex = sWEPCmd.byKeyIndex;
+        pDevice->bTransmitKey = TRUE;
+        pDevice->bEncryptionEnable = TRUE;
+        pDevice->eEncryptionStatus = Ndis802_11Encryption1Enabled;
+
+        break;
+
+    case WLAN_CMD_GET_LINK:
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_GET_LINK status. \n");
+
+        memset(sLinkStatus.abySSID, 0 , WLAN_SSID_MAXLEN + 1);
+
+        if (pMgmt->eCurrMode == WMAC_MODE_IBSS_STA)
+            sLinkStatus.wBSSType = ADHOC;
+        else
+            sLinkStatus.wBSSType = INFRA;
+
+        if (pMgmt->eCurrState == WMAC_STATE_JOINTED)
+            sLinkStatus.byState = ADHOC_JOINTED;
+        else
+            sLinkStatus.byState = ADHOC_STARTED;
+
+        sLinkStatus.uChannel = pMgmt->uCurrChannel;
+        if (pDevice->bLinkPass == TRUE) {
+            sLinkStatus.bLink = TRUE;
+ 		    pItemSSID = (PWLAN_IE_SSID)pMgmt->abyCurrSSID;
+		    memcpy(sLinkStatus.abySSID, pItemSSID->abySSID, pItemSSID->len);
+		    memcpy(sLinkStatus.abyBSSID, pMgmt->abyCurrBSSID, WLAN_BSSID_LEN);
+		    sLinkStatus.uLinkRate = pMgmt->sNodeDBTable[0].wTxDataRate;
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" Link Success ! \n");
+        }
+        else {
+            sLinkStatus.bLink = FALSE;
+        }
+        if (copy_to_user(pReq->data, &sLinkStatus, sizeof(SCmdLinkStatus))) {
+			result = -EFAULT;
+			break;
+		};
+
+        break;
+
+    case WLAN_CMD_GET_LISTLEN:
+		cbListCount = 0;
+		pBSS = &(pMgmt->sBSSList[0]);
+        for (ii = 0; ii < MAX_BSS_NUM; ii++) {
+            pBSS = &(pMgmt->sBSSList[ii]);
+            if (!pBSS->bActive)
+                continue;
+            cbListCount++;
+        };
+        sList.uItem = cbListCount;
+        if (copy_to_user(pReq->data, &sList, sizeof(SBSSIDList))) {
+			result = -EFAULT;
+			break;
+		};
+        pReq->wResult = 0;
+        break;
+
+    case WLAN_CMD_GET_LIST:
+        if (copy_from_user(&sList, pReq->data, sizeof(SBSSIDList))) {
+			result = -EFAULT;
+			break;
+		};
+        pList = (PSBSSIDList)kmalloc(sizeof(SBSSIDList) + (sList.uItem * sizeof(SBSSIDItem)), (int)GFP_ATOMIC);
+        if (pList == NULL) {
+            result = -ENOMEM;
+            break;
+        }
+		pList->uItem = sList.uItem;
+		pBSS = &(pMgmt->sBSSList[0]);
+        for (ii = 0, jj = 0; jj < MAX_BSS_NUM ; jj++) {
+            pBSS = &(pMgmt->sBSSList[jj]);
+            if (pBSS->bActive) {
+    		    pList->sBSSIDList[ii].uChannel = pBSS->uChannel;
+    		    pList->sBSSIDList[ii].wBeaconInterval = pBSS->wBeaconInterval;
+    		    pList->sBSSIDList[ii].wCapInfo = pBSS->wCapInfo;
+//    		    pList->sBSSIDList[ii].uRSSI = pBSS->uRSSI;
+    		    RFvRSSITodBm(pDevice, (BYTE)(pBSS->uRSSI), &ldBm);
+    		    pList->sBSSIDList[ii].uRSSI = (UINT)ldBm;
+    		    memcpy(pList->sBSSIDList[ii].abyBSSID, pBSS->abyBSSID, WLAN_BSSID_LEN);
+    		    pItemSSID = (PWLAN_IE_SSID)pBSS->abySSID;
+    		    memset(pList->sBSSIDList[ii].abySSID, 0, WLAN_SSID_MAXLEN + 1);
+    		    memcpy(pList->sBSSIDList[ii].abySSID, pItemSSID->abySSID, pItemSSID->len);
+                if (WLAN_GET_CAP_INFO_ESS(pBSS->wCapInfo)) {
+    		        pList->sBSSIDList[ii].byNetType = INFRA;
+                }
+                else {
+    		        pList->sBSSIDList[ii].byNetType = ADHOC;
+    		    }
+    		    if (WLAN_GET_CAP_INFO_PRIVACY(pBSS->wCapInfo)) {
+    		        pList->sBSSIDList[ii].bWEPOn = TRUE;
+                }
+                else {
+    		        pList->sBSSIDList[ii].bWEPOn = FALSE;
+    		    }
+    		    ii ++;
+    		    if (ii >= pList->uItem)
+    		        break;
+            }
+        }
+
+        if (copy_to_user(pReq->data, pList, sizeof(SBSSIDList) + (sList.uItem * sizeof(SBSSIDItem)))) {
+			result = -EFAULT;
+			break;
+		};
+        kfree(pList);
+        pReq->wResult = 0;
+        break;
+
+    case WLAN_CMD_GET_MIB:
+        if (copy_to_user(pReq->data, &(pDevice->s802_11Counter), sizeof(SDot11MIBCount))) {
+			result = -EFAULT;
+			break;
+		};
+        break;
+
+    case WLAN_CMD_GET_STAT:
+        if (copy_to_user(pReq->data, &(pDevice->scStatistic), sizeof(SStatCounter))) {
+			result = -EFAULT;
+			break;
+		};
+        break;
+    case WLAN_CMD_STOP_MAC:
+
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_STOP_MAC\n");
+        netif_stop_queue(pDevice->dev);
+
+        spin_lock_irq(&pDevice->lock);
+        if (pDevice->bRadioOff == FALSE) {
+            CARDbRadioPowerOff(pDevice);
+        }
+        pDevice->bLinkPass = FALSE;
+        memset(pMgmt->abyCurrBSSID, 0, 6);
+        pMgmt->eCurrState = WMAC_STATE_IDLE;
+        del_timer(&pDevice->sTimerCommand);
+        del_timer(&pMgmt->sTimerSecondCallback);
+        pDevice->bCmdRunning = FALSE;
+        pDevice->bMACSuspend = TRUE;
+        MACvIntDisable(pDevice->PortOffset);
+        spin_unlock_irq(&pDevice->lock);
+
+        break;
+
+    case WLAN_CMD_START_MAC:
+
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_START_MAC\n");
+
+        if (pDevice->bMACSuspend == TRUE) {
+            if (pDevice->bRadioOff == TRUE)
+                CARDbRadioPowerOn(pDevice);
+            vMgrTimerInit(pDevice);
+            MACvIntEnable(pDevice->PortOffset, IMR_MASK_VALUE);
+            add_timer(&pMgmt->sTimerSecondCallback);
+            pDevice->bMACSuspend = FALSE;
+        }
+        break;
+
+    case WLAN_CMD_SET_HOSTAPD:
+
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_SET_HOSTAPD\n");
+
+        if (copy_from_user(&sValue, pReq->data, sizeof(SCmdValue))) {
+			result = -EFAULT;
+			break;
+		};
+		if (sValue.dwValue == 1) {
+            if (hostap_set_hostapd(pDevice, 1, 1) == 0){
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Enable HOSTAP\n");
+            }
+            else {
+			    result = -EFAULT;
+			    break;
+			}
+        }
+        else {
+            hostap_set_hostapd(pDevice, 0, 1);
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Disable HOSTAP\n");
+        }
+
+        break;
+
+    case WLAN_CMD_SET_HOSTAPD_STA:
+
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_SET_HOSTAPD_STA\n");
+
+        break;
+    case WLAN_CMD_SET_802_1X:
+
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_SET_802_1X\n");
+        if (copy_from_user(&sValue, pReq->data, sizeof(SCmdValue))) {
+			result = -EFAULT;
+			break;
+		};
+
+		if (sValue.dwValue == 1) {
+            pDevice->bEnable8021x = TRUE;
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Enable 802.1x\n");
+        }
+        else {
+            pDevice->bEnable8021x = FALSE;
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Disable 802.1x\n");
+        }
+
+        break;
+
+
+    case WLAN_CMD_SET_HOST_WEP:
+
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_SET_HOST_WEP\n");
+        if (copy_from_user(&sValue, pReq->data, sizeof(SCmdValue))) {
+			result = -EFAULT;
+			break;
+		};
+
+		if (sValue.dwValue == 1) {
+            pDevice->bEnableHostWEP = TRUE;
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Enable HostWEP\n");
+        }
+        else {
+            pDevice->bEnableHostWEP = FALSE;
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Disable HostWEP\n");
+        }
+
+        break;
+
+    case WLAN_CMD_SET_WPA:
+         DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_SET_WPA\n");
+
+        if (copy_from_user(&sValue, pReq->data, sizeof(SCmdValue))) {
+			result = -EFAULT;
+			break;
+		};
+		if (sValue.dwValue == 1) {
+                     DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "up wpadev\n");
+		   memcpy(pDevice->wpadev->dev_addr, pDevice->dev->dev_addr, U_ETHER_ADDR_LEN);
+		   pDevice->bWPADEVUp = TRUE;
+        }
+        else {
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "close wpadev\n");
+	   pDevice->bWPADEVUp = FALSE;
+        }
+
+        break;
+
+    case WLAN_CMD_AP_START:
+
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_AP_START\n");
+        if (pDevice->bRadioOff == TRUE) {
+            CARDbRadioPowerOn(pDevice);
+            vMgrTimerInit(pDevice);
+            MACvIntEnable(pDevice->PortOffset, IMR_MASK_VALUE);
+            add_timer(&pMgmt->sTimerSecondCallback);
+        }
+        if (copy_from_user(&sStartAPCmd, pReq->data, sizeof(SCmdStartAP))) {
+			result = -EFAULT;
+			break;
+		};
+
+	    if (sStartAPCmd.wBSSType == AP) {
+	        pMgmt->eConfigMode = WMAC_CONFIG_AP;
+	        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "ioct set to AP mode\n");
+	    }
+	    else {
+	        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "ioct BSS type not set to AP mode\n");
+			result = -EFAULT;
+			break;
+	    }
+
+
+	    if (sStartAPCmd.wBBPType == PHY80211g) {
+            pMgmt->byAPBBType = PHY_TYPE_11G;
+        }
+        else if (sStartAPCmd.wBBPType == PHY80211a) {
+                 pMgmt->byAPBBType = PHY_TYPE_11A;
+        }
+        else {
+            pMgmt->byAPBBType = PHY_TYPE_11B;
+        }
+
+        pItemSSID = (PWLAN_IE_SSID)sStartAPCmd.ssid;
+        memset(pMgmt->abyDesireSSID, 0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
+		memcpy(pMgmt->abyDesireSSID, pItemSSID, pItemSSID->len + WLAN_IEHDR_LEN);
+
+	    if ((sStartAPCmd.uChannel > 0)&&(sStartAPCmd.uChannel <= 14))
+	        pDevice->uChannel = sStartAPCmd.uChannel;
+
+	    if ((sStartAPCmd.uBeaconInt >= 20) && (sStartAPCmd.uBeaconInt <= 1000))
+            pMgmt->wIBSSBeaconPeriod = sStartAPCmd.uBeaconInt;
+        else
+            pMgmt->wIBSSBeaconPeriod = 100;
+
+        if (sStartAPCmd.bShareKeyAuth == TRUE){
+            pMgmt->bShareKeyAlgorithm = TRUE;
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Share Key \n");
+        }
+        else {
+            pMgmt->bShareKeyAlgorithm = FALSE;
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Open System \n");
+        }
+        memcpy(pMgmt->abyIBSSSuppRates, abySuppRates, 6);
+
+        if (sStartAPCmd.byBasicRate & BIT3) {
+            pMgmt->abyIBSSSuppRates[2] |= BIT7;
+            pMgmt->abyIBSSSuppRates[3] |= BIT7;
+            pMgmt->abyIBSSSuppRates[4] |= BIT7;
+            pMgmt->abyIBSSSuppRates[5] |= BIT7;
+        }else if (sStartAPCmd.byBasicRate & BIT2) {
+             pMgmt->abyIBSSSuppRates[2] |= BIT7;
+             pMgmt->abyIBSSSuppRates[3] |= BIT7;
+             pMgmt->abyIBSSSuppRates[4] |= BIT7;
+        }else if (sStartAPCmd.byBasicRate & BIT1) {
+             pMgmt->abyIBSSSuppRates[2] |= BIT7;
+             pMgmt->abyIBSSSuppRates[3] |= BIT7;
+        }else if (sStartAPCmd.byBasicRate & BIT1) {
+             pMgmt->abyIBSSSuppRates[2] |= BIT7;
+        }else {
+            //default 1,2M
+             pMgmt->abyIBSSSuppRates[2] |= BIT7;
+             pMgmt->abyIBSSSuppRates[3] |= BIT7;
+        }
+
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Support Rate= %x %x %x %x\n",
+                pMgmt->abyIBSSSuppRates[2],
+                pMgmt->abyIBSSSuppRates[3],
+                pMgmt->abyIBSSSuppRates[4],
+                pMgmt->abyIBSSSuppRates[5]
+                );
+
+        netif_stop_queue(pDevice->dev);
+        spin_lock_irq(&pDevice->lock);
+        bScheduleCommand((HANDLE)pDevice, WLAN_CMD_RUN_AP, NULL);
+        spin_unlock_irq(&pDevice->lock);
+        break;
+
+    case WLAN_CMD_GET_NODE_CNT:
+
+		cbListCount = 0;
+		pNode = &(pMgmt->sNodeDBTable[0]);
+        for (ii = 0; ii < (MAX_NODE_NUM + 1); ii++) {
+            pNode = &(pMgmt->sNodeDBTable[ii]);
+            if (!pNode->bActive)
+                continue;
+            cbListCount++;
+        };
+
+        sNodeList.uItem = cbListCount;
+        if (copy_to_user(pReq->data, &sNodeList, sizeof(SNodeList))) {
+			result = -EFAULT;
+			break;
+		};
+        pReq->wResult = 0;
+        break;
+
+    case WLAN_CMD_GET_NODE_LIST:
+
+        if (copy_from_user(&sNodeList, pReq->data, sizeof(SNodeList))) {
+			result = -EFAULT;
+			break;
+		};
+        pNodeList = (PSNodeList)kmalloc(sizeof(SNodeList) + (sNodeList.uItem * sizeof(SNodeItem)), (int)GFP_ATOMIC);
+        if (pNodeList == NULL) {
+            result = -ENOMEM;
+            break;
+        }
+		pNodeList->uItem = sNodeList.uItem;
+		pNode = &(pMgmt->sNodeDBTable[0]);
+        for (ii = 0, jj = 0; ii < (MAX_NODE_NUM + 1); ii++) {
+            pNode = &(pMgmt->sNodeDBTable[ii]);
+            if (pNode->bActive) {
+    		    pNodeList->sNodeList[jj].wAID = pNode->wAID;
+    		    memcpy(pNodeList->sNodeList[jj].abyMACAddr, pNode->abyMACAddr, WLAN_ADDR_LEN);
+    		    pNodeList->sNodeList[jj].wTxDataRate = pNode->wTxDataRate;
+    		    pNodeList->sNodeList[jj].wInActiveCount = (WORD)pNode->uInActiveCount;
+    		    pNodeList->sNodeList[jj].wEnQueueCnt = (WORD)pNode->wEnQueueCnt;
+    		    pNodeList->sNodeList[jj].wFlags = (WORD)pNode->dwFlags;
+    		    pNodeList->sNodeList[jj].bPWBitOn = pNode->bPSEnable;
+    		    pNodeList->sNodeList[jj].byKeyIndex = pNode->byKeyIndex;
+    		    pNodeList->sNodeList[jj].wWepKeyLength = pNode->uWepKeyLength;
+    		    memcpy(&(pNodeList->sNodeList[jj].abyWepKey[0]), &(pNode->abyWepKey[0]), WEP_KEYMAXLEN);
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "key= %2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n",
+                            pNodeList->sNodeList[jj].abyWepKey[0],
+                            pNodeList->sNodeList[jj].abyWepKey[1],
+                            pNodeList->sNodeList[jj].abyWepKey[2],
+                            pNodeList->sNodeList[jj].abyWepKey[3],
+                            pNodeList->sNodeList[jj].abyWepKey[4]
+                           );
+    		    pNodeList->sNodeList[jj].bIsInFallback = pNode->bIsInFallback;
+    		    pNodeList->sNodeList[jj].uTxFailures = pNode->uTxFailures;
+    		    pNodeList->sNodeList[jj].uTxAttempts = pNode->uTxAttempts;
+    		    pNodeList->sNodeList[jj].wFailureRatio = (WORD)pNode->uFailureRatio;
+    		    jj ++;
+    		    if (jj >= pNodeList->uItem)
+    		        break;
+    		}
+		};
+        if (copy_to_user(pReq->data, pNodeList, sizeof(SNodeList) + (sNodeList.uItem * sizeof(SNodeItem)))) {
+			result = -EFAULT;
+			break;
+		};
+        kfree(pNodeList);
+        pReq->wResult = 0;
+        break;
+
+#ifdef WPA_SM_Transtatus
+    case 0xFF:
+        memset(wpa_Result.ifname,0,sizeof(wpa_Result.ifname));
+	    wpa_Result.proto = 0;
+	    wpa_Result.key_mgmt = 0;
+	    wpa_Result.eap_type = 0;
+	    wpa_Result.authenticated = FALSE;
+		  pDevice->fWPA_Authened = FALSE;
+        if (copy_from_user(&wpa_Result, pReq->data, sizeof(wpa_Result))) {
+            result = -EFAULT;
+			break;
+		}
+
+	if(wpa_Result.authenticated==TRUE) {
+   #ifdef SndEvt_ToAPI
+   {
+     union iwreq_data      wrqu;
+
+     pItemSSID = (PWLAN_IE_SSID)pMgmt->abyCurrSSID;
+
+     memset(&wrqu, 0, sizeof(wrqu));
+     wrqu.data.flags = RT_WPACONNECTED_EVENT_FLAG;
+     wrqu.data.length =pItemSSID->len;
+     wireless_send_event(pDevice->dev, IWEVCUSTOM, &wrqu, pItemSSID->abySSID);
+   }
+   #endif
+         pDevice->fWPA_Authened = TRUE;           //is sucessful peer to wpa_Result.authenticated?
+}
+
+        //printk("get private wpa_supplicant announce WPA SM\n");
+	//printk("wpa-->ifname=%s\n",wpa_Result.ifname);
+	//printk("wpa-->proto=%d\n",wpa_Result.proto);
+	//printk("wpa-->key-mgmt=%d\n",wpa_Result.key_mgmt);
+	//printk("wpa-->eap_type=%d\n",wpa_Result.eap_type);
+	//printk("wpa-->authenticated is %s\n",(wpa_Result.authenticated==TRUE)?"TRUE":"FALSE");
+
+	pReq->wResult = 0;
+        break;
+#endif
+
+
+    default:
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Private command not support..\n");
+    }
+
+    return result;
+}
+
+/*
+VOID
+vConfigWEPKey (
+    IN PSDevice pDevice,
+    IN DWORD    dwKeyIndex,
+    IN PBYTE    pbyKey,
+    IN ULONG    uKeyLength
+    )
+{
+    int ii;
+
+
+    ZERO_MEMORY(&pDevice->abyWepKey[dwKeyIndex][0], WLAN_WEPMAX_KEYLEN);
+    MEMvCopy(&pDevice->abyWepKey[dwKeyIndex][0], pbyKey, uKeyLength);
+
+    pDevice->bWepKeyAvailable[dwKeyIndex] = TRUE;
+    pDevice->auWepKeyLength[dwKeyIndex] = uKeyLength;
+
+    MACvSetDefaultKeyEntry(pDevice->PortOffset, uKeyLength, dwKeyIndex,
+                           (PDWORD) &(pDevice->abyWepKey[dwKeyIndex][0]), pDevice->byLocalID);
+
+    if (pDevice->eEncryptionStatus < Ndis802_11EncryptionNotSupported) {
+        for(ii=0; ii<MAX_GROUP_KEY; ii++) {
+            if ((pDevice->bWepKeyAvailable[ii] == TRUE) &&
+                (pDevice->auWepKeyLength[ii] == WLAN_WEP232_KEYLEN)) {
+                pDevice->uCurrentWEPMode = TX_WEP_SW232;
+                MACvDisableDefaultKey(pDevice->PortOffset);
+                break;
+            }
+        }
+        if ((ii == MAX_GROUP_KEY) &&
+            (pDevice->eEncryptionStatus < Ndis802_11EncryptionNotSupported)) {
+            MACvEnableDefaultKey(pDevice->PortOffset, pDevice->byLocalID);
+        }
+    }
+}
+*/
diff --git a/drivers/staging/vt6655/ioctl.h b/drivers/staging/vt6655/ioctl.h
new file mode 100644
index 00000000000..9c6816eab46
--- /dev/null
+++ b/drivers/staging/vt6655/ioctl.h
@@ -0,0 +1,74 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: hostap.h
+ *
+ * Purpose:
+ *
+ * Author: Lyndon Chen
+ *
+ * Date: May 21, 2003
+ *
+ */
+
+
+#ifndef __IOCTL_H__
+#define __IOCTL_H__
+
+#if !defined(__DEVICE_H__)
+#include "device.h"
+#endif
+
+
+/*---------------------  Export Definitions -------------------------*/
+
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+
+
+#ifdef __cplusplus
+extern "C" {                            /* Assume C declarations for C++ */
+#endif /* __cplusplus */
+
+
+int private_ioctl(PSDevice pDevice, struct ifreq *rq);
+
+/*
+VOID vConfigWEPKey (
+    IN PSDevice pDevice,
+    IN DWORD    dwKeyIndex,
+    IN PBYTE    pbyKey,
+    IN ULONG    uKeyLength
+    );
+*/
+
+#ifdef __cplusplus
+}                                       /* End of extern "C" { */
+#endif /* __cplusplus */
+
+
+
+
+#endif // __IOCTL_H__
+
+
+
diff --git a/drivers/staging/vt6655/iowpa.h b/drivers/staging/vt6655/iowpa.h
new file mode 100644
index 00000000000..451e2efc5ce
--- /dev/null
+++ b/drivers/staging/vt6655/iowpa.h
@@ -0,0 +1,159 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: iowpa.h
+ *
+ * Purpose: Handles wpa supplicant ioctl interface
+ *
+ * Author: Lyndon Chen
+ *
+ * Date: May 8, 2002
+ *
+ */
+
+#ifndef __IOWPA_H__
+#define __IOWPA_H__
+
+
+/*---------------------  Export Definitions -------------------------*/
+
+
+#define WPA_IE_LEN 64
+
+
+//WPA related
+/*
+typedef enum { WPA_ALG_NONE, WPA_ALG_WEP, WPA_ALG_TKIP, WPA_ALG_CCMP } wpa_alg;
+typedef enum { CIPHER_NONE, CIPHER_WEP40, CIPHER_TKIP, CIPHER_CCMP,
+	       CIPHER_WEP104 } wpa_cipher;
+typedef enum { KEY_MGMT_802_1X, KEY_MGMT_PSK, KEY_MGMT_NONE,
+	       KEY_MGMT_802_1X_NO_WPA, KEY_MGMT_WPA_NONE } wpa_key_mgmt;
+*/
+
+enum {
+	VIAWGET_SET_WPA = 1,
+	VIAWGET_SET_KEY = 2,
+	VIAWGET_SET_SCAN = 3,
+	VIAWGET_GET_SCAN = 4,
+	VIAWGET_GET_SSID = 5,
+	VIAWGET_GET_BSSID = 6,
+	VIAWGET_SET_DROP_UNENCRYPT = 7,
+	VIAWGET_SET_DEAUTHENTICATE = 8,
+	VIAWGET_SET_ASSOCIATE = 9,
+	VIAWGET_SET_DISASSOCIATE= 10
+};
+
+
+enum {
+	VIAWGET_ASSOC_MSG = 1,
+	VIAWGET_DISASSOC_MSG = 2,
+	VIAWGET_PTK_MIC_MSG = 3,
+	VIAWGET_GTK_MIC_MSG = 4,
+	VIAWGET_CCKM_ROAM_MSG = 5,
+	VIAWGET_DEVICECLOSE_MSG = 6
+};
+
+
+
+#pragma pack(1)
+typedef struct viawget_wpa_header {
+	u8 type;
+	u16 req_ie_len;
+	u16 resp_ie_len;
+} viawget_wpa_header;
+
+
+
+struct viawget_wpa_param {
+	u32 cmd;
+	u8 addr[6];
+	union {
+		struct {
+			u8 len;
+			u8 data[0];
+		} generic_elem;
+
+		struct {
+        	u8 bssid[6];
+			u8 ssid[32];
+			u8 ssid_len;
+        	u8 *wpa_ie;
+        	u16 wpa_ie_len;
+        	int pairwise_suite;
+        	int group_suite;
+        	int key_mgmt_suite;
+        	int auth_alg;
+        	int mode;
+
+		} wpa_associate;
+
+		struct {
+	        int alg_name;
+	        u16 key_index;
+	        u16 set_tx;
+	        u8 *seq;
+	        u16 seq_len;
+	        u8 *key;
+	        u16 key_len;
+		} wpa_key;
+
+		struct {
+			u8 ssid_len;
+			u8 ssid[32];
+		} scan_req;
+
+		struct {
+			u16 scan_count;
+			u8 *buf;
+		} scan_results;
+
+	} u;
+
+};
+
+#pragma pack(1)
+struct viawget_scan_result {
+	u8 bssid[6];
+	u8 ssid[32];
+	u16 ssid_len;
+	u8 wpa_ie[WPA_IE_LEN];
+	u16 wpa_ie_len;
+	u8 rsn_ie[WPA_IE_LEN];
+	u16 rsn_ie_len;
+	int freq; // MHz
+	int caps; // e.g. privacy
+	int qual; // signal quality
+	int noise;
+	int level;
+	int maxrate;
+};
+
+//2006-1116-01,<Add> by NomadZhao
+#pragma pack()
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+
+/*---------------------  Export Types  ------------------------------*/
+
+
+/*---------------------  Export Functions  --------------------------*/
+
+
+
+#endif //__IOWPA_H__
diff --git a/drivers/staging/vt6655/iwctl.c b/drivers/staging/vt6655/iwctl.c
new file mode 100644
index 00000000000..4d5a1da8edf
--- /dev/null
+++ b/drivers/staging/vt6655/iwctl.c
@@ -0,0 +1,2397 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: iwctl.c
+ *
+ * Purpose:  wireless ext & ioctl functions
+ *
+ * Author: Lyndon Chen
+ *
+ * Date: July 5, 2006
+ *
+ * Functions:
+ *
+ * Revision History:
+ *
+ */
+
+
+#if !defined(__DEVICE_H__)
+#include "device.h"
+#endif
+#if !defined(__IOCTL_H__)
+#include "ioctl.h"
+#endif
+#if !defined(__IOCMD_H__)
+#include "iocmd.h"
+#endif
+#if !defined(__MAC_H__)
+#include "mac.h"
+#endif
+#if !defined(__CARD_H__)
+#include "card.h"
+#endif
+#if !defined(__HOSTAP_H__)
+#include "hostap.h"
+#endif
+#if !defined(__UMEM_H__)
+#include "umem.h"
+#endif
+#if !defined(__POWER_H__)
+#include "power.h"
+#endif
+#if !defined(__RF_H__)
+#include "rf.h"
+#endif
+
+#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+#if !defined(__IOWPA_H__)
+#include "iowpa.h"
+#endif
+#if !defined(__WPACTL_H__)
+#include "wpactl.h"
+#endif
+#endif
+
+#if WIRELESS_EXT > 12
+#include <net/iw_handler.h>
+#endif
+extern WORD TxRate_iwconfig;//2008-5-8 <add> by chester
+
+/*---------------------  Static Definitions -------------------------*/
+
+//2008-0409-07, <Add> by Einsn Liu
+#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+#define SUPPORTED_WIRELESS_EXT                  18
+#else
+#define SUPPORTED_WIRELESS_EXT                  17
+#endif
+
+#ifdef WIRELESS_EXT
+
+static const long frequency_list[] = {
+    2412, 2417, 2422, 2427, 2432, 2437, 2442, 2447, 2452, 2457, 2462, 2467, 2472, 2484,
+    4915, 4920, 4925, 4935, 4940, 4945, 4960, 4980,
+    5035, 5040, 5045, 5055, 5060, 5080, 5170, 5180, 5190, 5200, 5210, 5220, 5230, 5240,
+    5260, 5280, 5300, 5320, 5500, 5520, 5540, 5560, 5580, 5600, 5620, 5640, 5660, 5680,
+    5700, 5745, 5765, 5785, 5805, 5825
+	};
+
+#endif
+
+
+/*---------------------  Static Classes  ----------------------------*/
+
+
+//static int          msglevel                =MSG_LEVEL_DEBUG;
+static int          msglevel                =MSG_LEVEL_INFO;
+
+
+/*---------------------  Static Variables  --------------------------*/
+/*---------------------  Static Functions  --------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+#ifdef WIRELESS_EXT
+
+#if WIRELESS_EXT > 12
+
+struct iw_statistics *iwctl_get_wireless_stats(struct net_device *dev)
+{
+	PSDevice pDevice = netdev_priv(dev);
+	long ldBm;
+	pDevice->wstats.status = pDevice->eOPMode;
+	#ifdef Calcu_LinkQual
+	 #if 0
+	  if(pDevice->byBBType == BB_TYPE_11B) {
+	     if(pDevice->byCurrSQ > 120)
+                  pDevice->scStatistic.LinkQuality = 100;
+	     else
+		 pDevice->scStatistic.LinkQuality = pDevice->byCurrSQ*100/120;
+	    }
+	  else if(pDevice->byBBType == BB_TYPE_11G) {
+                if(pDevice->byCurrSQ < 20)
+		   pDevice->scStatistic.LinkQuality = 100;
+	       else if(pDevice->byCurrSQ >96)
+		   pDevice->scStatistic.LinkQuality  = 0;
+	       else
+		   pDevice->scStatistic.LinkQuality = (96-pDevice->byCurrSQ)*100/76;
+	   }
+	   if(pDevice->bLinkPass !=TRUE)
+	       pDevice->scStatistic.LinkQuality = 0;
+	  #endif
+	   if(pDevice->scStatistic.LinkQuality > 100)
+   	       pDevice->scStatistic.LinkQuality = 100;
+               pDevice->wstats.qual.qual =(BYTE) pDevice->scStatistic.LinkQuality;
+	#else
+	pDevice->wstats.qual.qual = pDevice->byCurrSQ;
+	#endif
+	RFvRSSITodBm(pDevice, (BYTE)(pDevice->uCurrRSSI), &ldBm);
+	pDevice->wstats.qual.level = ldBm;
+	//pDevice->wstats.qual.level = 0x100 - pDevice->uCurrRSSI;
+	pDevice->wstats.qual.noise = 0;
+	pDevice->wstats.qual.updated = 1;
+	pDevice->wstats.discard.nwid = 0;
+	pDevice->wstats.discard.code = 0;
+	pDevice->wstats.discard.fragment = 0;
+	pDevice->wstats.discard.retries = (U32)pDevice->scStatistic.dwTsrErr;
+	pDevice->wstats.discard.misc = 0;
+	pDevice->wstats.miss.beacon = 0;
+
+	return &pDevice->wstats;
+}
+
+#endif
+
+
+
+/*------------------------------------------------------------------*/
+
+
+static int iwctl_commit(struct net_device *dev,
+			      struct iw_request_info *info,
+			      void *wrq,
+			      char *extra)
+{
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWCOMMIT \n");
+
+	return 0;
+
+}
+
+/*
+ * Wireless Handler : get protocol name
+ */
+
+int iwctl_giwname(struct net_device *dev,
+			 struct iw_request_info *info,
+			 char *wrq,
+			 char *extra)
+{
+	strcpy(wrq, "802.11-a/b/g");
+	return 0;
+}
+
+int iwctl_giwnwid(struct net_device *dev,
+             struct iw_request_info *info,
+			 struct iw_param *wrq,
+                   char *extra)
+{
+ 	//wrq->value = 0x100;
+	//wrq->disabled = 0;
+	//wrq->fixed = 1;
+	//return 0;
+  return -EOPNOTSUPP;
+}
+#if WIRELESS_EXT > 13
+
+/*
+ * Wireless Handler : set scan
+ */
+
+int iwctl_siwscan(struct net_device *dev,
+             struct iw_request_info *info,
+			 struct iw_point *wrq,
+             char *extra)
+{
+	PSDevice	        pDevice = (PSDevice)netdev_priv(dev);
+		struct iw_scan_req  *req = (struct iw_scan_req *)extra;
+		 PSMgmtObject        pMgmt = &(pDevice->sMgmtObj);
+	BYTE                abyScanSSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
+	PWLAN_IE_SSID       pItemSSID=NULL;
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWSCAN \n");
+
+
+if(pDevice->byReAssocCount > 0) {   //reject scan when re-associating!
+//send scan event to wpa_Supplicant
+  union iwreq_data wrqu;
+ printk("wireless_send_event--->SIOCGIWSCAN(scan done)\n");
+ memset(&wrqu, 0, sizeof(wrqu));
+ wireless_send_event(pDevice->dev, SIOCGIWSCAN, &wrqu, NULL);
+  return 0;
+}
+
+	spin_lock_irq(&pDevice->lock);
+	   BSSvClearBSSList((HANDLE)pDevice, pDevice->bLinkPass);
+
+//mike add: active scan OR passive scan OR desire_ssid scan
+ if(wrq->length == sizeof(struct iw_scan_req)) {
+   if (wrq->flags & IW_SCAN_THIS_ESSID)  {                               //desire_ssid scan
+       memset(abyScanSSID, 0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
+       pItemSSID = (PWLAN_IE_SSID)abyScanSSID;
+       pItemSSID->byElementID = WLAN_EID_SSID;
+       memcpy(pItemSSID->abySSID, req->essid, (int)req->essid_len);
+         if (pItemSSID->abySSID[req->essid_len - 1] == '\0') {
+           if(req->essid_len>0)
+		pItemSSID->len = req->essid_len - 1;
+         }
+	else
+	  pItemSSID->len = req->essid_len;
+	  pMgmt->eScanType = WMAC_SCAN_PASSIVE;
+         printk("SIOCSIWSCAN:[desired_ssid=%s,len=%d]\n",((PWLAN_IE_SSID)abyScanSSID)->abySSID,
+		 	                                                                                ((PWLAN_IE_SSID)abyScanSSID)->len);
+	bScheduleCommand((HANDLE) pDevice, WLAN_CMD_BSSID_SCAN, abyScanSSID);
+	spin_unlock_irq(&pDevice->lock);
+
+	return 0;
+   }
+   else if(req->scan_type == IW_SCAN_TYPE_PASSIVE) {          //passive scan
+       pMgmt->eScanType = WMAC_SCAN_PASSIVE;
+   }
+ }
+ else {           //active scan
+     pMgmt->eScanType = WMAC_SCAN_ACTIVE;
+ }
+
+	 pMgmt->eScanType = WMAC_SCAN_PASSIVE;
+	bScheduleCommand((HANDLE) pDevice, WLAN_CMD_BSSID_SCAN, NULL);
+	spin_unlock_irq(&pDevice->lock);
+
+	return 0;
+}
+
+
+/*
+ * Wireless Handler : get scan results
+ */
+
+int iwctl_giwscan(struct net_device *dev,
+             struct iw_request_info *info,
+			 struct iw_point *wrq,
+             char *extra)
+{
+    int ii, jj, kk;
+	PSDevice	        pDevice = (PSDevice)netdev_priv(dev);
+    PSMgmtObject        pMgmt = &(pDevice->sMgmtObj);
+    PKnownBSS           pBSS;
+    PWLAN_IE_SSID       pItemSSID;
+    PWLAN_IE_SUPP_RATES pSuppRates, pExtSuppRates;
+	char *current_ev = extra;
+	char *end_buf = extra + IW_SCAN_MAX_DATA;
+	char *current_val = NULL;
+	struct iw_event iwe;
+	long ldBm;
+#if WIRELESS_EXT > 14
+	char buf[MAX_WPA_IE_LEN * 2 + 30];
+#endif /* WIRELESS_EXT > 14 */
+
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWSCAN \n");
+
+    if (pMgmt->eScanState ==  WMAC_IS_SCANNING) {
+        // In scanning..
+		return -EAGAIN;
+	}
+	pBSS = &(pMgmt->sBSSList[0]);
+    for (ii = 0, jj = 0; jj < MAX_BSS_NUM ; jj++) {
+		if (current_ev >= end_buf)
+			break;
+        pBSS = &(pMgmt->sBSSList[jj]);
+        if (pBSS->bActive) {
+		    memset(&iwe, 0, sizeof(iwe));
+		    iwe.cmd = SIOCGIWAP;
+		    iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
+			memcpy(iwe.u.ap_addr.sa_data, pBSS->abyBSSID, WLAN_BSSID_LEN);
+            current_ev = iwe_stream_add_event(info,current_ev,end_buf, &iwe, IW_EV_ADDR_LEN);
+                 //ADD ssid
+	             memset(&iwe, 0, sizeof(iwe));
+                      iwe.cmd = SIOCGIWESSID;
+                      pItemSSID = (PWLAN_IE_SSID)pBSS->abySSID;
+                       iwe.u.data.length = pItemSSID->len;
+                       iwe.u.data.flags = 1;
+            current_ev = iwe_stream_add_point(info,current_ev,end_buf, &iwe, pItemSSID->abySSID);
+		//ADD mode
+		    memset(&iwe, 0, sizeof(iwe));
+		    iwe.cmd = SIOCGIWMODE;
+            if (WLAN_GET_CAP_INFO_ESS(pBSS->wCapInfo)) {
+		        iwe.u.mode = IW_MODE_INFRA;
+            }
+            else {
+                iwe.u.mode = IW_MODE_ADHOC;
+		    }
+	        iwe.len = IW_EV_UINT_LEN;
+            current_ev = iwe_stream_add_event(info,current_ev, end_buf, &iwe,  IW_EV_UINT_LEN);
+           //ADD frequency
+            pSuppRates = (PWLAN_IE_SUPP_RATES)pBSS->abySuppRates;
+            pExtSuppRates = (PWLAN_IE_SUPP_RATES)pBSS->abyExtSuppRates;
+            memset(&iwe, 0, sizeof(iwe));
+           	iwe.cmd = SIOCGIWFREQ;
+           	iwe.u.freq.m = pBSS->uChannel;
+           	iwe.u.freq.e = 0;
+           	iwe.u.freq.i = 0;
+            current_ev = iwe_stream_add_event(info,current_ev,end_buf, &iwe, IW_EV_FREQ_LEN);
+
+
+            //2008-0409-04, <Add> by Einsn Liu
+			{
+			int f = (int)pBSS->uChannel - 1;
+			if(f < 0)f = 0;
+			iwe.u.freq.m = frequency_list[f] * 100000;
+			iwe.u.freq.e = 1;
+			}
+            current_ev = iwe_stream_add_event(info,current_ev,end_buf, &iwe, IW_EV_FREQ_LEN);
+       		//ADD quality
+            memset(&iwe, 0, sizeof(iwe));
+	        iwe.cmd = IWEVQUAL;
+	        RFvRSSITodBm(pDevice, (BYTE)(pBSS->uRSSI), &ldBm);
+		    iwe.u.qual.level = ldBm;
+	        iwe.u.qual.noise = 0;
+//2008-0409-01, <Add> by Einsn Liu
+			if(-ldBm<50){
+				iwe.u.qual.qual = 100;
+			}else  if(-ldBm > 90) {
+				 iwe.u.qual.qual = 0;
+			}else {
+				iwe.u.qual.qual=(40-(-ldBm-50))*100/40;
+			}
+			iwe.u.qual.updated=7;
+
+	      //  iwe.u.qual.qual = 0;
+            current_ev = iwe_stream_add_event(info,current_ev, end_buf, &iwe, IW_EV_QUAL_LEN);
+
+            memset(&iwe, 0, sizeof(iwe));
+            iwe.cmd = SIOCGIWENCODE;
+            iwe.u.data.length = 0;
+            if (WLAN_GET_CAP_INFO_PRIVACY(pBSS->wCapInfo)) {
+                iwe.u.data.flags =IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
+            }else {
+                iwe.u.data.flags = IW_ENCODE_DISABLED;
+            }
+            current_ev = iwe_stream_add_point(info,current_ev,end_buf, &iwe, pItemSSID->abySSID);
+
+            memset(&iwe, 0, sizeof(iwe));
+            iwe.cmd = SIOCGIWRATE;
+           	iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
+      		current_val = current_ev + IW_EV_LCP_LEN;
+
+       		for (kk = 0 ; kk < 12 ; kk++) {
+		        if (pSuppRates->abyRates[kk] == 0)
+			        break;
+		        // Bit rate given in 500 kb/s units (+ 0x80)
+		        iwe.u.bitrate.value = ((pSuppRates->abyRates[kk] & 0x7f) * 500000);
+                current_val = iwe_stream_add_value(info,current_ev, current_val, end_buf, &iwe, IW_EV_PARAM_LEN);
+			}
+       		for (kk = 0 ; kk < 8 ; kk++) {
+		        if (pExtSuppRates->abyRates[kk] == 0)
+			        break;
+		        // Bit rate given in 500 kb/s units (+ 0x80)
+		        iwe.u.bitrate.value = ((pExtSuppRates->abyRates[kk] & 0x7f) * 500000);
+                current_val = iwe_stream_add_value(info,current_ev, current_val, end_buf, &iwe, IW_EV_PARAM_LEN);
+	        }
+
+	        if((current_val - current_ev) > IW_EV_LCP_LEN)
+		        current_ev = current_val;
+
+#if WIRELESS_EXT > 14
+            memset(&iwe, 0, sizeof(iwe));
+            iwe.cmd = IWEVCUSTOM;
+            sprintf(buf, "bcn_int=%d", pBSS->wBeaconInterval);
+            iwe.u.data.length = strlen(buf);
+            current_ev = iwe_stream_add_point(info,current_ev, end_buf, &iwe, buf);
+
+#if WIRELESS_EXT > 17
+            if ((pBSS->wWPALen > 0) && (pBSS->wWPALen <= MAX_WPA_IE_LEN)) {
+                memset(&iwe, 0, sizeof(iwe));
+                iwe.cmd = IWEVGENIE;
+                iwe.u.data.length = pBSS->wWPALen;
+                current_ev = iwe_stream_add_point(info,current_ev, end_buf, &iwe, pBSS->byWPAIE);
+            }
+
+            if ((pBSS->wRSNLen > 0) && (pBSS->wRSNLen <= MAX_WPA_IE_LEN)) {
+                memset(&iwe, 0, sizeof(iwe));
+                iwe.cmd = IWEVGENIE;
+                iwe.u.data.length = pBSS->wRSNLen;
+                current_ev = iwe_stream_add_point(info,current_ev, end_buf, &iwe, pBSS->byRSNIE);
+            }
+
+#else // WIRELESS_EXT > 17
+            if ((pBSS->wWPALen > 0) && (pBSS->wWPALen <= MAX_WPA_IE_LEN)) {
+                u8 *p = buf;
+                memset(&iwe, 0, sizeof(iwe));
+                iwe.cmd = IWEVCUSTOM;
+		        p += sprintf(p, "wpa_ie=");
+		        for (ii = 0; ii < pBSS->wWPALen; ii++) {
+			        p += sprintf(p, "%02x", pBSS->byWPAIE[ii]);
+		        }
+		        iwe.u.data.length = strlen(buf);
+                current_ev = iwe_stream_add_point(info,current_ev, end_buf, &iwe, buf);
+		    }
+
+
+            if ((pBSS->wRSNLen > 0) && (pBSS->wRSNLen <= MAX_WPA_IE_LEN)) {
+                u8 *p = buf;
+                memset(&iwe, 0, sizeof(iwe));
+                iwe.cmd = IWEVCUSTOM;
+		        p += sprintf(p, "rsn_ie=");
+		        for (ii = 0; ii < pBSS->wRSNLen; ii++) {
+			        p += sprintf(p, "%02x", pBSS->byRSNIE[ii]);
+		        }
+		        iwe.u.data.length = strlen(buf);
+                current_ev = iwe_stream_add_point(info,current_ev, end_buf, &iwe, buf);
+		    }
+#endif
+#endif
+        }
+    }// for
+
+	wrq->length = current_ev - extra;
+	return 0;
+
+}
+
+#endif	/* WIRELESS_EXT > 13 */
+
+
+/*
+ * Wireless Handler : set frequence or channel
+ */
+
+int iwctl_siwfreq(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_freq *wrq,
+             char *extra)
+{
+	PSDevice	        pDevice = (PSDevice)netdev_priv(dev);
+	int rc = 0;
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWFREQ \n");
+
+	// If setting by frequency, convert to a channel
+	if((wrq->e == 1) &&
+	   (wrq->m >= (int) 2.412e8) &&
+	   (wrq->m <= (int) 2.487e8)) {
+		int f = wrq->m / 100000;
+		int c = 0;
+		while((c < 14) && (f != frequency_list[c]))
+			c++;
+		wrq->e = 0;
+		wrq->m = c + 1;
+	}
+	// Setting by channel number
+	if((wrq->m > 14) || (wrq->e > 0))
+		rc = -EOPNOTSUPP;
+	else {
+		int channel = wrq->m;
+		if((channel < 1) || (channel > 14)) {
+			DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: New channel value of %d is invalid!\n", dev->name, wrq->m);
+			rc = -EINVAL;
+		} else {
+			  // Yes ! We can set it !!!
+              DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " Set to channel = %d\n", channel);
+			  pDevice->uChannel = channel;
+ 			 //2007-0207-04,<Add> by EinsnLiu
+			 //Make change effect at once
+			  pDevice->bCommit = TRUE;
+		}
+	}
+
+	return rc;
+}
+
+/*
+ * Wireless Handler : get frequence or channel
+ */
+
+int iwctl_giwfreq(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_freq *wrq,
+             char *extra)
+{
+	PSDevice	        pDevice = (PSDevice)netdev_priv(dev);
+    PSMgmtObject        pMgmt = &(pDevice->sMgmtObj);
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWFREQ \n");
+
+#ifdef WEXT_USECHANNELS
+	wrq->m = (int)pMgmt->uCurrChannel;
+	wrq->e = 0;
+#else
+	{
+		int f = (int)pMgmt->uCurrChannel - 1;
+		if(f < 0)
+		   f = 0;
+		wrq->m = frequency_list[f] * 100000;
+		wrq->e = 1;
+	}
+#endif
+
+	return 0;
+}
+
+/*
+ * Wireless Handler : set operation mode
+ */
+
+int iwctl_siwmode(struct net_device *dev,
+             struct iw_request_info *info,
+             __u32 *wmode,
+             char *extra)
+{
+	PSDevice	        pDevice = (PSDevice)netdev_priv(dev);
+    PSMgmtObject        pMgmt = &(pDevice->sMgmtObj);
+    int rc = 0;
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWMODE \n");
+
+    if (pMgmt->eCurrMode == WMAC_MODE_ESS_AP && pDevice->bEnableHostapd) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Can't set operation mode, hostapd is running \n");
+        return rc;
+    }
+
+	switch(*wmode) {
+
+	case IW_MODE_ADHOC:
+	    if (pMgmt->eConfigMode != WMAC_CONFIG_IBSS_STA) {
+            pMgmt->eConfigMode = WMAC_CONFIG_IBSS_STA;
+            if (pDevice->flags & DEVICE_FLAGS_OPENED) {
+		        pDevice->bCommit = TRUE;
+   		    }
+		}
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "set mode to ad-hoc \n");
+		break;
+	case IW_MODE_AUTO:
+	case IW_MODE_INFRA:
+	    if (pMgmt->eConfigMode != WMAC_CONFIG_ESS_STA) {
+            pMgmt->eConfigMode = WMAC_CONFIG_ESS_STA;
+            if (pDevice->flags & DEVICE_FLAGS_OPENED) {
+		        pDevice->bCommit = TRUE;
+   		    }
+		}
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "set mode to infrastructure \n");
+		break;
+	case IW_MODE_MASTER:
+
+        pMgmt->eConfigMode = WMAC_CONFIG_ESS_STA;
+		rc = -EOPNOTSUPP;
+		break;
+
+	    if (pMgmt->eConfigMode != WMAC_CONFIG_AP) {
+            pMgmt->eConfigMode = WMAC_CONFIG_AP;
+            if (pDevice->flags & DEVICE_FLAGS_OPENED) {
+		        pDevice->bCommit = TRUE;
+   		    }
+		}
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "set mode to Access Point \n");
+		break;
+
+	case IW_MODE_REPEAT:
+        pMgmt->eConfigMode = WMAC_CONFIG_ESS_STA;
+		rc = -EOPNOTSUPP;
+		break;
+	default:
+		rc = -EINVAL;
+	}
+
+	return rc;
+}
+
+/*
+ * Wireless Handler : get operation mode
+ */
+
+int iwctl_giwmode(struct net_device *dev,
+             struct iw_request_info *info,
+             __u32 *wmode,
+             char *extra)
+{
+	PSDevice	        pDevice = (PSDevice)netdev_priv(dev);
+    PSMgmtObject        pMgmt = &(pDevice->sMgmtObj);
+
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWMODE \n");
+	// If not managed, assume it's ad-hoc
+	switch (pMgmt->eConfigMode) {
+	case WMAC_CONFIG_ESS_STA:
+		*wmode = IW_MODE_INFRA;
+		break;
+	case WMAC_CONFIG_IBSS_STA:
+        *wmode = IW_MODE_ADHOC;
+		break;
+	case WMAC_CONFIG_AUTO:
+		*wmode = IW_MODE_INFRA;
+		break;
+	case WMAC_CONFIG_AP:
+		*wmode = IW_MODE_MASTER;
+		break;
+	default:
+		*wmode = IW_MODE_ADHOC;
+	}
+
+	return 0;
+}
+
+
+/*
+ * Wireless Handler : get capability range
+ */
+
+int iwctl_giwrange(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_point *wrq,
+             char *extra)
+{
+	struct iw_range *range = (struct iw_range *) extra;
+	int		i,k;
+    BYTE abySupportedRates[13]= {0x02, 0x04, 0x0B, 0x16, 0x0c, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C, 0x90};
+
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWRANGE \n");
+	if (wrq->pointer) {
+		wrq->length = sizeof(struct iw_range);
+		memset(range, 0, sizeof(struct iw_range));
+		range->min_nwid = 0x0000;
+		range->max_nwid = 0x0000;
+		range->num_channels = 14;
+		// Should be based on cap_rid.country to give only
+		//  what the current card support
+		k = 0;
+		for(i = 0; i < 14; i++) {
+			range->freq[k].i = i + 1; // List index
+			range->freq[k].m = frequency_list[i] * 100000;
+			range->freq[k++].e = 1;	// Values in table in MHz -> * 10^5 * 10
+		}
+		range->num_frequency = k;
+		// Hum... Should put the right values there
+	     #ifdef Calcu_LinkQual
+                 range->max_qual.qual = 100;
+	     #else
+		range->max_qual.qual = 255;
+	     #endif
+		range->max_qual.level = 0;
+		range->max_qual.noise = 0;
+		range->sensitivity = 255;
+
+		for(i = 0 ; i < 13 ; i++) {
+			range->bitrate[i] = abySupportedRates[i] * 500000;
+			if(range->bitrate[i] == 0)
+				break;
+		}
+		range->num_bitrates = i;
+
+		// Set an indication of the max TCP throughput
+		// in bit/s that we can expect using this interface.
+		//  May be use for QoS stuff... Jean II
+		if(i > 2)
+			range->throughput = 5 * 1000 * 1000;
+		else
+			range->throughput = 1.5 * 1000 * 1000;
+
+		range->min_rts = 0;
+		range->max_rts = 2312;
+		range->min_frag = 256;
+		range->max_frag = 2312;
+
+
+	    // the encoding capabilities
+	    range->num_encoding_sizes = 3;
+	    // 64(40) bits WEP
+	    range->encoding_size[0] = 5;
+	    // 128(104) bits WEP
+	    range->encoding_size[1] = 13;
+	    // 256 bits for WPA-PSK
+	    range->encoding_size[2] = 32;
+	    // 4 keys are allowed
+	    range->max_encoding_tokens = 4;
+
+#if WIRELESS_EXT > 17
+	    range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 |
+		    IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP;
+#endif
+
+#if WIRELESS_EXT > 9
+		range->min_pmp = 0;
+		range->max_pmp = 1000000;// 1 secs
+		range->min_pmt = 0;
+		range->max_pmt = 1000000;// 1 secs
+		range->pmp_flags = IW_POWER_PERIOD;
+		range->pmt_flags = IW_POWER_TIMEOUT;
+		range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_ALL_R;
+
+		// Transmit Power - values are in mW
+
+        range->txpower[0] = 100;
+		range->num_txpower = 1;
+		range->txpower_capa = IW_TXPOW_MWATT;
+#endif // WIRELESS_EXT > 9
+#if WIRELESS_EXT > 10
+		range->we_version_source = SUPPORTED_WIRELESS_EXT;
+		range->we_version_compiled = WIRELESS_EXT;
+		range->retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME;
+		range->retry_flags = IW_RETRY_LIMIT;
+		range->r_time_flags = IW_RETRY_LIFETIME;
+		range->min_retry = 1;
+		range->max_retry = 65535;
+		range->min_r_time = 1024;
+		range->max_r_time = 65535 * 1024;
+#endif // WIRELESS_EXT > 10
+#if WIRELESS_EXT > 11
+		// Experimental measurements - boundary 11/5.5 Mb/s
+		// Note : with or without the (local->rssi), results
+		//  are somewhat different. - Jean II
+		range->avg_qual.qual = 6;
+		range->avg_qual.level = 176;	// -80 dBm
+		range->avg_qual.noise = 0;
+#endif // WIRELESS_EXT > 11
+	}
+
+
+	return 0;
+}
+
+
+/*
+ * Wireless Handler : set ap mac address
+ */
+
+int iwctl_siwap(struct net_device *dev,
+             struct iw_request_info *info,
+			 struct sockaddr *wrq,
+             char *extra)
+{
+	PSDevice	        pDevice = (PSDevice)netdev_priv(dev);
+    PSMgmtObject        pMgmt = &(pDevice->sMgmtObj);
+    int rc = 0;
+        BYTE                 ZeroBSSID[WLAN_BSSID_LEN]={0x00,0x00,0x00,0x00,0x00,0x00};
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWAP \n");
+if (pMgmt->eScanState ==  WMAC_IS_SCANNING) {
+        // In scanning..
+     printk("SIOCSIWAP(??)-->In scanning...\n");
+   //  return -EAGAIN;
+  }
+	if (wrq->sa_family != ARPHRD_ETHER)
+		rc = -EINVAL;
+	else {
+		memset(pMgmt->abyDesireBSSID, 0xFF, 6);
+		memcpy(pMgmt->abyDesireBSSID, wrq->sa_data, 6);
+		                //2008-0409-05, <Add> by Einsn Liu
+		if((pDevice->bLinkPass == TRUE) &&
+                     (memcmp(pMgmt->abyDesireBSSID, pMgmt->abyCurrBSSID, 6)== 0)){
+			return rc;
+			}
+	//mike :add
+	 if ((IS_BROADCAST_ADDRESS(pMgmt->abyDesireBSSID)) ||
+	     (memcmp(pMgmt->abyDesireBSSID, ZeroBSSID, 6) == 0)){
+	      printk("SIOCSIWAP:invalid desired BSSID return!\n");
+               return rc;
+         }
+       //mike add: if desired AP is hidden ssid(there are two same BSSID in list),
+       //                  then ignore,because you don't known which one to be connect with??
+       	{
+           UINT            ii , uSameBssidNum=0;
+                  for (ii = 0; ii < MAX_BSS_NUM; ii++) {
+                     if (pMgmt->sBSSList[ii].bActive &&
+                        IS_ETH_ADDRESS_EQUAL(pMgmt->sBSSList[ii].abyBSSID,pMgmt->abyDesireBSSID)) {
+                        uSameBssidNum++;
+                     }
+                  }
+	     if(uSameBssidNum >= 2) {  //hit: desired AP is in hidden ssid mode!!!
+                 printk("SIOCSIWAP:ignore for desired AP in hidden mode\n");
+	        return rc;
+	     }
+       	}
+        if (pDevice->flags & DEVICE_FLAGS_OPENED) {
+		    pDevice->bCommit = TRUE;
+   		}
+	}
+	return rc;
+}
+
+/*
+ * Wireless Handler : get ap mac address
+ */
+
+int iwctl_giwap(struct net_device *dev,
+             struct iw_request_info *info,
+			 struct sockaddr *wrq,
+             char *extra)
+{
+	PSDevice	        pDevice = (PSDevice)netdev_priv(dev);
+    PSMgmtObject        pMgmt = &(pDevice->sMgmtObj);
+
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWAP \n");
+
+    memcpy(wrq->sa_data, pMgmt->abyCurrBSSID, 6);
+   //2008-0410,<Modify> by Einsn Liu
+    if ((pDevice->bLinkPass == FALSE) && (pMgmt->eCurrMode != WMAC_MODE_ESS_AP))
+        memset(wrq->sa_data, 0, 6);
+
+    if (pMgmt->eCurrMode == WMAC_MODE_ESS_AP) {
+        memcpy(wrq->sa_data, pMgmt->abyCurrBSSID, 6);
+    }
+
+	wrq->sa_family = ARPHRD_ETHER;
+
+	return 0;
+
+}
+
+
+/*
+ * Wireless Handler : get ap list
+ */
+
+int iwctl_giwaplist(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_point *wrq,
+             char *extra)
+{
+	int ii,jj, rc = 0;
+	struct sockaddr sock[IW_MAX_AP];
+	struct iw_quality qual[IW_MAX_AP];
+	PSDevice	        pDevice = (PSDevice)netdev_priv(dev);
+    PSMgmtObject        pMgmt = &(pDevice->sMgmtObj);
+
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWAPLIST \n");
+	// Only super-user can see AP list
+
+	if (!capable(CAP_NET_ADMIN)) {
+		rc = -EPERM;
+		return rc;
+	}
+
+	if (wrq->pointer) {
+
+		PKnownBSS pBSS = &(pMgmt->sBSSList[0]);
+
+		for (ii = 0, jj= 0; ii < MAX_BSS_NUM; ii++) {
+		    pBSS = &(pMgmt->sBSSList[ii]);
+            if (!pBSS->bActive)
+                continue;
+            if ( jj >= IW_MAX_AP)
+                break;
+			memcpy(sock[jj].sa_data, pBSS->abyBSSID, 6);
+			sock[jj].sa_family = ARPHRD_ETHER;
+			qual[jj].level = pBSS->uRSSI;
+			qual[jj].qual = qual[jj].noise = 0;
+			qual[jj].updated = 2;
+			jj++;
+		}
+
+		wrq->flags = 1; // Should be define'd
+		wrq->length = jj;
+		memcpy(extra, sock, sizeof(struct sockaddr)*jj);
+		memcpy(extra + sizeof(struct sockaddr)*jj, qual, sizeof(struct iw_quality)*jj);
+	}
+
+	return rc;
+}
+
+
+/*
+ * Wireless Handler : set essid
+ */
+
+int iwctl_siwessid(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_point *wrq,
+             char *extra)
+{
+	PSDevice	        pDevice = (PSDevice)netdev_priv(dev);
+    PSMgmtObject        pMgmt = &(pDevice->sMgmtObj);
+    PWLAN_IE_SSID       pItemSSID;
+  //2008-0409-05, <Add> by Einsn Liu
+    BYTE  len;
+
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWESSID \n");
+ pDevice->fWPA_Authened = FALSE;
+if (pMgmt->eScanState ==  WMAC_IS_SCANNING) {
+        // In scanning..
+     printk("SIOCSIWESSID(??)-->In scanning...\n");
+   //  return -EAGAIN;
+  }
+	// Check if we asked for `any'
+	if(wrq->flags == 0) {
+		// Just send an empty SSID list
+		// Just send an empty SSID list
+		memset(pMgmt->abyDesireSSID, 0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
+                  memset(pMgmt->abyDesireBSSID, 0xFF,6);
+	    printk("set essid to 'any' \n");
+           #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+             //Unknown desired AP,so here need not associate??
+            //if(pDevice->bWPASuppWextEnabled == TRUE)  {
+                  return 0;
+            // }
+            #endif
+	} else {
+		// Set the SSID
+		memset(pMgmt->abyDesireSSID, 0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
+        pItemSSID = (PWLAN_IE_SSID)pMgmt->abyDesireSSID;
+        pItemSSID->byElementID = WLAN_EID_SSID;
+		memcpy(pItemSSID->abySSID, extra, wrq->length);
+		         if (pItemSSID->abySSID[wrq->length - 1] == '\0') {
+           if(wrq->length>0)
+		pItemSSID->len = wrq->length - 1;
+         }
+	else
+	  pItemSSID->len = wrq->length;
+	printk("set essid to %s \n",pItemSSID->abySSID);
+		//2008-0409-05, <Add> by Einsn Liu
+       len=(pItemSSID->len > ((PWLAN_IE_SSID)pMgmt->abyCurrSSID)->len)?pItemSSID->len:((PWLAN_IE_SSID)pMgmt->abyCurrSSID)->len;
+   if((pDevice->bLinkPass == TRUE) &&
+  	(memcmp(pItemSSID->abySSID,((PWLAN_IE_SSID)pMgmt->abyCurrSSID)->abySSID,len)==0))
+         return 0;
+
+        //mike:need clear desiredBSSID
+     if(pItemSSID->len==0) {
+        memset(pMgmt->abyDesireBSSID, 0xFF,6);
+        return 0;
+     }
+
+#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+ //Wext wil order another command of siwap to link with desired AP,
+ //so here need not associate??
+  if(pDevice->bWPASuppWextEnabled == TRUE)  {
+        /*******search if  in hidden ssid mode ****/
+        {
+           PKnownBSS       pCurr = NULL;
+           BYTE                   abyTmpDesireSSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
+	  UINT            ii , uSameBssidNum=0;
+
+	  memset(abyTmpDesireSSID,0,sizeof(abyTmpDesireSSID));
+	  memcpy(abyTmpDesireSSID,pMgmt->abyDesireSSID,sizeof(abyTmpDesireSSID));
+            pCurr = BSSpSearchBSSList(pDevice,
+                                      NULL,
+                                      abyTmpDesireSSID,
+                                      pMgmt->eConfigPHYMode
+                                      );
+
+            if (pCurr == NULL){
+               printk("SIOCSIWESSID:hidden ssid site survey before associate.......\n");
+	      vResetCommandTimer((HANDLE) pDevice);
+	      pMgmt->eScanType = WMAC_SCAN_ACTIVE;
+               bScheduleCommand((HANDLE) pDevice, WLAN_CMD_BSSID_SCAN, pMgmt->abyDesireSSID);
+	      bScheduleCommand((HANDLE) pDevice, WLAN_CMD_SSID, pMgmt->abyDesireSSID);
+          }
+	 else {  //mike:to find out if that desired SSID is a hidden-ssid AP ,
+                     //         by means of judging if there are two same BSSID exist in list ?
+                  for (ii = 0; ii < MAX_BSS_NUM; ii++) {
+                     if (pMgmt->sBSSList[ii].bActive &&
+                        IS_ETH_ADDRESS_EQUAL(pMgmt->sBSSList[ii].abyBSSID, pCurr->abyBSSID)) {
+                        uSameBssidNum++;
+                     }
+                  }
+	     if(uSameBssidNum >= 2) {  //hit: desired AP is in hidden ssid mode!!!
+                 printk("SIOCSIWESSID:hidden ssid directly associate.......\n");
+	        vResetCommandTimer((HANDLE) pDevice);
+	        pMgmt->eScanType = WMAC_SCAN_PASSIVE;          //this scan type,you'll submit scan result!
+	        bScheduleCommand((HANDLE) pDevice, WLAN_CMD_BSSID_SCAN, pMgmt->abyDesireSSID);
+	        bScheduleCommand((HANDLE) pDevice, WLAN_CMD_SSID, pMgmt->abyDesireSSID);
+	     }
+	 }
+        }
+     return 0;
+  }
+	     #endif
+
+	    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "set essid = %s \n", pItemSSID->abySSID);
+/*
+	             #if WIRELESS_EXT < 21
+ DEVICE_PRT(MSG_LEVEL_INFO, KERN_INFO " SIOCSIWESSID1 \n");
+		pItemSSID->len = wrq->length - 1;
+	     #else
+ DEVICE_PRT(MSG_LEVEL_INFO, KERN_INFO " SIOCSIWESSID2 \n");
+		pItemSSID->len = wrq->length;
+	     #endif
+	     */
+	}
+
+    if (pDevice->flags & DEVICE_FLAGS_OPENED) {
+	    pDevice->bCommit = TRUE;
+	}
+
+
+	return 0;
+}
+
+
+/*
+ * Wireless Handler : get essid
+ */
+
+int iwctl_giwessid(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_point *wrq,
+             char *extra)
+{
+
+	PSDevice	        pDevice = (PSDevice)netdev_priv(dev);
+    PSMgmtObject        pMgmt = &(pDevice->sMgmtObj);
+	PWLAN_IE_SSID       pItemSSID;
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWESSID \n");
+
+	// Note : if wrq->u.data.flags != 0, we should
+	// get the relevant SSID from the SSID list...
+
+	// Get the current SSID
+    pItemSSID = (PWLAN_IE_SSID)pMgmt->abyCurrSSID;
+	//pItemSSID = (PWLAN_IE_SSID)pMgmt->abyDesireSSID;
+	memcpy(extra, pItemSSID->abySSID , pItemSSID->len);
+	extra[pItemSSID->len] = '\0';
+	wrq->length = pItemSSID->len + 1;
+	        //2008-0409-03, <Add> by Einsn Liu
+        #if WIRELESS_EXT < 21
+	wrq->length = pItemSSID->len + 1;
+        #else
+        wrq->length = pItemSSID->len;
+        #endif
+	wrq->flags = 1; // active
+
+
+	return 0;
+}
+
+/*
+ * Wireless Handler : set data rate
+ */
+
+int iwctl_siwrate(struct net_device *dev,
+             struct iw_request_info *info,
+			 struct iw_param *wrq,
+             char *extra)
+{
+	PSDevice	        pDevice = (PSDevice)netdev_priv(dev);
+    int rc = 0;
+	u8	brate = 0;
+	int	i;
+	BYTE abySupportedRates[13]= {0x02, 0x04, 0x0B, 0x16, 0x0c, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C, 0x90};
+
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWRATE \n");
+    if (!(pDevice->flags & DEVICE_FLAGS_OPENED)) {
+        rc = -EINVAL;
+        return rc;
+    }
+
+	// First : get a valid bit rate value
+
+	// Which type of value
+	if((wrq->value < 13) &&
+	   (wrq->value >= 0)) {
+		// Setting by rate index
+		// Find value in the magic rate table
+		brate = wrq->value;
+	} else {
+		// Setting by frequency value
+		u8	normvalue = (u8) (wrq->value/500000);
+
+		// Check if rate is valid
+		for(i = 0 ; i < 13 ; i++) {
+			if(normvalue == abySupportedRates[i]) {
+				brate = i;
+				break;
+			}
+		}
+	}
+	// -1 designed the max rate (mostly auto mode)
+	if(wrq->value == -1) {
+		// Get the highest available rate
+		for(i = 0 ; i < 13 ; i++) {
+			if(abySupportedRates[i] == 0)
+				break;
+		}
+		if(i != 0)
+			brate = i - 1;
+
+	}
+	// Check that it is valid
+	// brate is index of abySupportedRates[]
+	if(brate > 13 ) {
+		rc = -EINVAL;
+		return rc;
+	}
+
+	// Now, check if we want a fixed or auto value
+	if(wrq->fixed != 0) {
+		// Fixed mode
+		// One rate, fixed
+	printk("Rate Fix\n");
+		pDevice->bFixRate = TRUE;
+        if ((pDevice->byBBType == BB_TYPE_11B)&& (brate > 3)) {
+
+			pDevice->uConnectionRate = 3;
+        }
+        else {
+            pDevice->uConnectionRate = brate;
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Fixed to Rate %d \n", pDevice->uConnectionRate);
+        }
+
+	}
+	else {
+        pDevice->bFixRate = FALSE;
+        pDevice->uConnectionRate = 13;
+	printk("auto rate:connection_rate is 13\n");
+}
+
+	return rc;
+}
+
+/*
+ * Wireless Handler : get data rate
+ */
+
+int iwctl_giwrate(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_param *wrq,
+             char *extra)
+{
+	PSDevice	        pDevice = (PSDevice)netdev_priv(dev);
+//2007-0118-05,<Mark> by EinsnLiu
+//Mark the unnecessary sentences.
+//    PSMgmtObject        pMgmt = &(pDevice->sMgmtObj);
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWRATE \n");
+    {
+        BYTE abySupportedRates[13]= {0x02, 0x04, 0x0B, 0x16, 0x0c, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C, 0x90};
+	    int brate = 0;
+//2008-5-8 <modify> by chester
+if(pDevice->bLinkPass){
+if(pDevice->bFixRate == TRUE){
+		if (pDevice->uConnectionRate < 13) {
+	        brate = abySupportedRates[pDevice->uConnectionRate];
+	    }else {
+            if (pDevice->byBBType == BB_TYPE_11B)
+	            brate = 0x16;
+            if (pDevice->byBBType == BB_TYPE_11G)
+	            brate = 0x6C;
+            if (pDevice->byBBType == BB_TYPE_11A)
+	            brate = 0x6C;
+	    }
+}
+else
+{
+
+ brate = abySupportedRates[TxRate_iwconfig];
+}
+}
+else brate =0;
+//2007-0118-05,<Mark> by EinsnLiu
+//Mark the unnecessary sentences.
+/*
+	    if (pMgmt->eCurrMode == WMAC_MODE_ESS_AP) {
+            if (pDevice->byBBType == BB_TYPE_11B)
+	            brate = 0x16;
+            if (pDevice->byBBType == BB_TYPE_11G)
+	            brate = 0x6C;
+            if (pDevice->byBBType == BB_TYPE_11A)
+	            brate = 0x6C;
+	    }
+*/
+
+//    		if (pDevice->uConnectionRate == 13)
+//                brate = abySupportedRates[pDevice->wCurrentRate];
+	    wrq->value = brate * 500000;
+	    // If more than one rate, set auto
+	    if (pDevice->bFixRate == TRUE)
+	        wrq->fixed = TRUE;
+    }
+
+
+	return 0;
+}
+
+
+
+/*
+ * Wireless Handler : set rts threshold
+ */
+
+int iwctl_siwrts(struct net_device *dev,
+             struct iw_request_info *info,
+			 struct iw_param *wrq,
+             char *extra)
+{
+	PSDevice	        pDevice = (PSDevice)netdev_priv(dev);
+	int rc = 0;
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWRTS \n");
+
+	{
+	    int rthr = wrq->value;
+	    if(wrq->disabled)
+			rthr = 2312;
+	    if((rthr < 0) || (rthr > 2312)) {
+			rc = -EINVAL;
+    	}else {
+		    pDevice->wRTSThreshold = rthr;
+	    }
+    }
+
+	return 0;
+}
+
+/*
+ * Wireless Handler : get rts
+ */
+
+int iwctl_giwrts(struct net_device *dev,
+             struct iw_request_info *info,
+			 struct iw_param *wrq,
+             char *extra)
+{
+	PSDevice	        pDevice = (PSDevice)netdev_priv(dev);
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWRTS \n");
+	wrq->value = pDevice->wRTSThreshold;
+	wrq->disabled = (wrq->value >= 2312);
+	wrq->fixed = 1;
+
+	return 0;
+}
+
+/*
+ * Wireless Handler : set fragment threshold
+ */
+
+int iwctl_siwfrag(struct net_device *dev,
+             struct iw_request_info *info,
+			 struct iw_param *wrq,
+             char *extra)
+{
+    PSDevice	        pDevice = (PSDevice)netdev_priv(dev);
+    int rc = 0;
+    int fthr = wrq->value;
+
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWFRAG \n");
+
+
+    if (wrq->disabled)
+		fthr = 2312;
+    if((fthr < 256) || (fthr > 2312)) {
+		rc = -EINVAL;
+    }else {
+		 fthr &= ~0x1;	// Get an even value
+	     pDevice->wFragmentationThreshold = (u16)fthr;
+    }
+
+	return rc;
+}
+
+/*
+ * Wireless Handler : get fragment threshold
+ */
+
+int iwctl_giwfrag(struct net_device *dev,
+             struct iw_request_info *info,
+			 struct iw_param *wrq,
+             char *extra)
+{
+    PSDevice	        pDevice = (PSDevice)netdev_priv(dev);
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWFRAG \n");
+	wrq->value = pDevice->wFragmentationThreshold;
+	wrq->disabled = (wrq->value >= 2312);
+	wrq->fixed = 1;
+
+	return 0;
+}
+
+
+
+/*
+ * Wireless Handler : set retry threshold
+ */
+int iwctl_siwretry(struct net_device *dev,
+             struct iw_request_info *info,
+			 struct iw_param *wrq,
+             char *extra)
+{
+    PSDevice	        pDevice = (PSDevice)netdev_priv(dev);
+    int rc = 0;
+
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWRETRY \n");
+
+	if (wrq->disabled) {
+		rc = -EINVAL;
+		return rc;
+	}
+
+	if (wrq->flags & IW_RETRY_LIMIT) {
+		if(wrq->flags & IW_RETRY_MAX)
+			pDevice->byLongRetryLimit = wrq->value;
+		else if (wrq->flags & IW_RETRY_MIN)
+			pDevice->byShortRetryLimit = wrq->value;
+		else {
+			// No modifier : set both
+			pDevice->byShortRetryLimit = wrq->value;
+			pDevice->byLongRetryLimit = wrq->value;
+		}
+	}
+	if (wrq->flags & IW_RETRY_LIFETIME) {
+		pDevice->wMaxTransmitMSDULifetime = wrq->value;
+	}
+
+
+	return rc;
+}
+
+/*
+ * Wireless Handler : get retry threshold
+ */
+int iwctl_giwretry(struct net_device *dev,
+             struct iw_request_info *info,
+			 struct iw_param *wrq,
+             char *extra)
+{
+    PSDevice	        pDevice = (PSDevice)netdev_priv(dev);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWRETRY \n");
+	wrq->disabled = 0;      // Can't be disabled
+
+	// Note : by default, display the min retry number
+	if((wrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) {
+		wrq->flags = IW_RETRY_LIFETIME;
+		wrq->value = (int)pDevice->wMaxTransmitMSDULifetime; //ms
+	} else if((wrq->flags & IW_RETRY_MAX)) {
+		wrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX;
+		wrq->value = (int)pDevice->byLongRetryLimit;
+	} else {
+		wrq->flags = IW_RETRY_LIMIT;
+		wrq->value = (int)pDevice->byShortRetryLimit;
+		if((int)pDevice->byShortRetryLimit != (int)pDevice->byLongRetryLimit)
+			wrq->flags |= IW_RETRY_MIN;
+	}
+
+
+	return 0;
+}
+
+
+/*
+ * Wireless Handler : set encode mode
+ */
+int iwctl_siwencode(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_point *wrq,
+             char *extra)
+{
+    PSDevice	        pDevice = (PSDevice)netdev_priv(dev);
+    PSMgmtObject        pMgmt = &(pDevice->sMgmtObj);
+	DWORD dwKeyIndex = (DWORD)(wrq->flags & IW_ENCODE_INDEX);
+	int ii,uu, rc = 0;
+	int index = (wrq->flags & IW_ENCODE_INDEX);
+
+//2007-0207-07,<Modify> by EinsnLiu
+//There are some problems when using iwconfig encode/key command to set the WEP key.
+//I almost rewrite this function.
+//now it support:(assume the wireless interface's name is eth0)
+//iwconfig eth0 key [1] 1122334455 open  /*set key stirng to index 1,and driver using key index is set to 1*/
+//iwconfig eth0 key [3]    /*set driver using  key index to 3,the key string no change */
+//iwconfig eth0 key 1122334455  /*set key string to driver using index*/
+//iwconfig eth0 key restricted  /*enable share key*/
+
+	PSKeyTable pkeytab;
+
+	DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWENCODE \n");
+
+if((wrq->flags & IW_ENCODE_DISABLED)==0){
+	//Not disable encryption
+
+	if (dwKeyIndex > WLAN_WEP_NKEYS) {
+		rc = -EINVAL;
+        return rc;
+    	}
+
+	if(dwKeyIndex<1&&((wrq->flags&IW_ENCODE_NOKEY)==0)){//set default key
+		if(pDevice->byKeyIndex<WLAN_WEP_NKEYS){
+			dwKeyIndex=pDevice->byKeyIndex;
+			}
+		else dwKeyIndex=0;
+		}else dwKeyIndex--;
+
+
+	// Check the size of the key
+	if (wrq->length > WLAN_WEP232_KEYLEN) {
+		rc = -EINVAL;
+        return rc;
+	}
+
+	if(wrq->length>0){//have key
+
+        if (wrq->length ==  WLAN_WEP232_KEYLEN) {
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Set 232 bit wep key\n");
+        }
+        else if (wrq->length ==  WLAN_WEP104_KEYLEN) {
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Set 104 bit wep key\n");
+        }
+        else if (wrq->length == WLAN_WEP40_KEYLEN) {
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Set 40 bit wep key, index= %d\n", (int)dwKeyIndex);
+        }else {//no support length
+		rc = -EINVAL;
+        return rc;
+		}
+        memset(pDevice->abyKey, 0, WLAN_WEP232_KEYLEN);
+        memcpy(pDevice->abyKey, extra, wrq->length);
+
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"abyKey: ");
+        for (ii = 0; ii < wrq->length; ii++) {
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%02x ", pDevice->abyKey[ii]);
+        }
+
+        if (pDevice->flags & DEVICE_FLAGS_OPENED) {
+            spin_lock_irq(&pDevice->lock);
+            KeybSetDefaultKey(&(pDevice->sKey),
+                            (DWORD)(dwKeyIndex | (1 << 31)),
+                           	wrq->length,
+                            NULL,
+                            pDevice->abyKey,
+                            KEY_CTL_WEP,
+                            pDevice->PortOffset,
+                            pDevice->byLocalID
+                          );
+            spin_unlock_irq(&pDevice->lock);
+        }
+        pDevice->byKeyIndex = (BYTE)dwKeyIndex;
+        pDevice->uKeyLength = wrq->length;
+        pDevice->bTransmitKey = TRUE;
+        pDevice->bEncryptionEnable = TRUE;
+        pDevice->eEncryptionStatus = Ndis802_11Encryption1Enabled;
+
+		}else if(index>0){
+	//when the length is 0 the request only changes the default transmit key index
+	//check the new key has a non zero lenget
+	if(pDevice->bEncryptionEnable==FALSE)
+	{
+		rc = -EINVAL;
+        	return rc;
+	}
+	DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Just set Default key Index:\n");
+	pkeytab=&(pDevice->sKey.KeyTable[MAX_KEY_TABLE-1]);
+	if(pkeytab->GroupKey[(BYTE)dwKeyIndex].uKeyLength==0){
+		DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Default key len is 0\n");
+		rc = -EINVAL;
+      	  	return rc;
+		}
+	 pDevice->byKeyIndex =(BYTE)dwKeyIndex;
+	 pkeytab->dwGTKeyIndex =dwKeyIndex | (1 << 31);
+	 pkeytab->GroupKey[(BYTE)dwKeyIndex].dwKeyIndex=dwKeyIndex | (1 << 31);
+	}
+
+}else {//disable the key
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Disable WEP function\n");
+	if(pDevice->bEncryptionEnable==FALSE)
+		return 0;
+	pMgmt->bShareKeyAlgorithm = FALSE;
+        pDevice->bEncryptionEnable = FALSE;
+        pDevice->eEncryptionStatus = Ndis802_11EncryptionDisabled;
+        if (pDevice->flags & DEVICE_FLAGS_OPENED) {
+            spin_lock_irq(&pDevice->lock);
+            for(uu=0;uu<MAX_KEY_TABLE;uu++)
+                MACvDisableKeyEntry(pDevice->PortOffset, uu);
+            spin_unlock_irq(&pDevice->lock);
+        }
+}
+//End Modify,Einsn
+
+/*
+	DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWENCODE \n");
+
+	// Check the size of the key
+	if (wrq->length > WLAN_WEP232_KEYLEN) {
+		rc = -EINVAL;
+        return rc;
+	}
+
+	if (dwKeyIndex > WLAN_WEP_NKEYS) {
+		rc = -EINVAL;
+        return rc;
+    }
+
+    if (dwKeyIndex > 0)
+		dwKeyIndex--;
+
+	// Send the key to the card
+	if (wrq->length > 0) {
+
+        if (wrq->length ==  WLAN_WEP232_KEYLEN) {
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Set 232 bit wep key\n");
+        }
+        else if (wrq->length ==  WLAN_WEP104_KEYLEN) {
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Set 104 bit wep key\n");
+        }
+        else if (wrq->length == WLAN_WEP40_KEYLEN) {
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Set 40 bit wep key, index= %d\n", (int)dwKeyIndex);
+        }
+        memset(pDevice->abyKey, 0, WLAN_WEP232_KEYLEN);
+        memcpy(pDevice->abyKey, extra, wrq->length);
+
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"abyKey: ");
+        for (ii = 0; ii < wrq->length; ii++) {
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%02x ", pDevice->abyKey[ii]);
+        }
+
+        if (pDevice->flags & DEVICE_FLAGS_OPENED) {
+            spin_lock_irq(&pDevice->lock);
+            KeybSetDefaultKey(&(pDevice->sKey),
+                            (DWORD)(pDevice->byKeyIndex | (1 << 31)),
+                            pDevice->uKeyLength,
+                            NULL,
+                            pDevice->abyKey,
+                            KEY_CTL_WEP,
+                            pDevice->PortOffset,
+                            pDevice->byLocalID
+                          );
+            spin_unlock_irq(&pDevice->lock);
+        }
+        pDevice->byKeyIndex = (BYTE)dwKeyIndex;
+        pDevice->uKeyLength = wrq->length;
+        pDevice->bTransmitKey = TRUE;
+        pDevice->bEncryptionEnable = TRUE;
+        pDevice->eEncryptionStatus = Ndis802_11Encryption1Enabled;
+
+		// Do we want to just set the transmit key index ?
+		if ( index < 4 ) {
+		    pDevice->byKeyIndex = index;
+		}
+		else if(!wrq->flags & IW_ENCODE_MODE) {
+				rc = -EINVAL;
+				return rc;
+	    }
+	}
+	// Read the flags
+	if(wrq->flags & IW_ENCODE_DISABLED){
+
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Disable WEP function\n");
+		pMgmt->bShareKeyAlgorithm = FALSE;
+        pDevice->bEncryptionEnable = FALSE;
+        pDevice->eEncryptionStatus = Ndis802_11EncryptionDisabled;
+        if (pDevice->flags & DEVICE_FLAGS_OPENED) {
+            spin_lock_irq(&pDevice->lock);
+            for(uu=0;uu<MAX_KEY_TABLE;uu++)
+                MACvDisableKeyEntry(pDevice->PortOffset, uu);
+            spin_unlock_irq(&pDevice->lock);
+        }
+	}
+*/
+
+	if(wrq->flags & IW_ENCODE_RESTRICTED) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Enable WEP & ShareKey System\n");
+		pMgmt->bShareKeyAlgorithm = TRUE;
+	}
+	if(wrq->flags & IW_ENCODE_OPEN) {
+	    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Enable WEP & Open System\n");
+		pMgmt->bShareKeyAlgorithm = FALSE;
+	}
+	return rc;
+}
+
+/*
+ * Wireless Handler : get encode mode
+ */
+ /*
+int iwctl_giwencode(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_point *wrq,
+             char *extra)
+{
+    PSDevice	        pDevice = (PSDevice)netdev_priv(dev);
+    PSMgmtObject        pMgmt = &(pDevice->sMgmtObj);
+    int rc = 0;
+    char abyKey[WLAN_WEP232_KEYLEN];
+	UINT index = (UINT)(wrq->flags & IW_ENCODE_INDEX);
+	PSKeyItem   pKey = NULL;
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWENCODE\n");
+//2007-0207-06,<Add> by EinsnLiu
+//the key index in iwconfig is 1-4 when our driver is 0-3
+//so it can't be used directly.
+//if the index is 0,we should used the index set by driver.
+	if (index > WLAN_WEP_NKEYS) {
+		rc = -EINVAL;
+        return rc;
+    	}
+	if(index<1){//set default key
+		if(pDevice->byKeyIndex<WLAN_WEP_NKEYS){
+			index=pDevice->byKeyIndex;
+			}
+		else index=0;
+		}else index--;
+//End Add,Einsn
+
+	memset(abyKey, 0, sizeof(abyKey));
+	// Check encryption mode
+	wrq->flags = IW_ENCODE_NOKEY;
+	// Is WEP enabled ???
+	if (pDevice->bEncryptionEnable)
+		wrq->flags |=  IW_ENCODE_ENABLED;
+    else
+		wrq->flags |=  IW_ENCODE_DISABLED;
+
+    if (pMgmt->bShareKeyAlgorithm)
+		wrq->flags |=  IW_ENCODE_RESTRICTED;
+	else
+		wrq->flags |=  IW_ENCODE_OPEN;
+
+	if (KeybGetKey(&(pDevice->sKey), pDevice->abyBroadcastAddr, (BYTE)index , &pKey)){
+        wrq->length = pKey->uKeyLength;
+        memcpy(abyKey, pKey->abyKey,  pKey->uKeyLength);
+//2007-0207-06,<Modify> by EinsnLiu
+//only get key success need to  copy data
+//index should +1.
+//there is not necessary to return -EINVAL when get key failed
+//if return -EINVAL,the encryption item can't be display by the command "iwconfig".
+	wrq->flags |= index+1;
+	memcpy(extra,  abyKey, WLAN_WEP232_KEYLEN);
+    }
+
+    //else {
+    //    rc = -EINVAL;
+   //     return rc;
+  //  }
+
+
+//End Modify,Einsn
+
+	return 0;
+}
+*/
+
+//2008-0409-06, <Add> by Einsn Liu
+
+int iwctl_giwencode(struct net_device *dev,
+			struct iw_request_info *info,
+			struct iw_point *wrq,
+			char *extra)
+{
+	PSDevice			pDevice = (PSDevice)netdev_priv(dev);
+	PSMgmtObject		pMgmt = &(pDevice->sMgmtObj);
+	char abyKey[WLAN_WEP232_KEYLEN];
+
+	UINT index = (UINT)(wrq->flags & IW_ENCODE_INDEX);
+	PSKeyItem	pKey = NULL;
+
+	DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWENCODE\n");
+
+	if (index > WLAN_WEP_NKEYS) {
+		return	-EINVAL;
+	}
+	if(index<1){//get default key
+		if(pDevice->byKeyIndex<WLAN_WEP_NKEYS){
+			index=pDevice->byKeyIndex;
+         	} else
+                      index=0;
+	}else
+             index--;
+
+	memset(abyKey, 0, WLAN_WEP232_KEYLEN);
+	// Check encryption mode
+	wrq->flags = IW_ENCODE_NOKEY;
+	// Is WEP enabled ???
+	if (pDevice->bEncryptionEnable)
+		wrq->flags |=  IW_ENCODE_ENABLED;
+	else
+		wrq->flags |=  IW_ENCODE_DISABLED;
+
+	if (pMgmt->bShareKeyAlgorithm)
+		wrq->flags |=  IW_ENCODE_RESTRICTED;
+	else
+		wrq->flags |=  IW_ENCODE_OPEN;
+		wrq->length=0;
+
+	if((index==0)&&(pDevice->eEncryptionStatus == Ndis802_11Encryption2Enabled||
+		pDevice->eEncryptionStatus == Ndis802_11Encryption3Enabled)){//get wpa pairwise  key
+			if (KeybGetKey(&(pDevice->sKey),pMgmt->abyCurrBSSID, 0xffffffff, &pKey)){
+			   wrq->length = pKey->uKeyLength;
+				  memcpy(abyKey, pKey->abyKey,	pKey->uKeyLength);
+				  memcpy(extra,  abyKey, WLAN_WEP232_KEYLEN);
+			   }
+	}else if (KeybGetKey(&(pDevice->sKey), pDevice->abyBroadcastAddr, (BYTE)index , &pKey)){
+			wrq->length = pKey->uKeyLength;
+			memcpy(abyKey, pKey->abyKey,  pKey->uKeyLength);
+		memcpy(extra,  abyKey, WLAN_WEP232_KEYLEN);
+	}
+
+	wrq->flags |= index+1;
+
+	return 0;
+}
+
+/*
+ * Wireless Handler : set power mode
+ */
+int iwctl_siwpower(struct net_device *dev,
+             struct iw_request_info *info,
+			 struct iw_param *wrq,
+             char *extra)
+{
+    PSDevice            pDevice = (PSDevice)netdev_priv(dev);
+    PSMgmtObject        pMgmt = &(pDevice->sMgmtObj);
+    int rc = 0;
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWPOWER \n");
+
+    if (!(pDevice->flags & DEVICE_FLAGS_OPENED)) {
+		 rc = -EINVAL;
+		 return rc;
+	}
+
+	if (wrq->disabled) {
+		pDevice->ePSMode = WMAC_POWER_CAM;
+		PSvDisablePowerSaving(pDevice);
+		return rc;
+	}
+	if ((wrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) {
+         pDevice->ePSMode = WMAC_POWER_FAST;
+         PSvEnablePowerSaving((HANDLE)pDevice, pMgmt->wListenInterval);
+
+	} else if ((wrq->flags & IW_POWER_TYPE) == IW_POWER_PERIOD) {
+	     pDevice->ePSMode = WMAC_POWER_FAST;
+         PSvEnablePowerSaving((HANDLE)pDevice, pMgmt->wListenInterval);
+	}
+	switch (wrq->flags & IW_POWER_MODE) {
+	case IW_POWER_UNICAST_R:
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWPOWER: IW_POWER_UNICAST_R \n");
+		rc = -EINVAL;
+		break;
+	case IW_POWER_ALL_R:
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWPOWER: IW_POWER_ALL_R \n");
+		rc = -EINVAL;
+	case IW_POWER_ON:
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWPOWER: IW_POWER_ON \n");
+		break;
+	default:
+		rc = -EINVAL;
+	}
+
+	return rc;
+}
+
+/*
+ * Wireless Handler : get power mode
+ */
+int iwctl_giwpower(struct net_device *dev,
+             struct iw_request_info *info,
+			 struct iw_param *wrq,
+             char *extra)
+{
+    PSDevice            pDevice = (PSDevice)netdev_priv(dev);
+    PSMgmtObject        pMgmt = &(pDevice->sMgmtObj);
+    int mode = pDevice->ePSMode;
+
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWPOWER \n");
+
+
+	if ((wrq->disabled = (mode == WMAC_POWER_CAM)))
+	    return 0;
+
+	if ((wrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) {
+		wrq->value = (int)((pMgmt->wListenInterval * pMgmt->wCurrBeaconPeriod) << 10);
+		wrq->flags = IW_POWER_TIMEOUT;
+	} else {
+		wrq->value = (int)((pMgmt->wListenInterval * pMgmt->wCurrBeaconPeriod) << 10);
+		wrq->flags = IW_POWER_PERIOD;
+	}
+	wrq->flags |= IW_POWER_ALL_R;
+
+	return 0;
+}
+
+
+/*
+ * Wireless Handler : get Sensitivity
+ */
+int iwctl_giwsens(struct net_device *dev,
+			 struct iw_request_info *info,
+			 struct iw_param *wrq,
+			 char *extra)
+{
+    PSDevice	        pDevice = (PSDevice)netdev_priv(dev);
+    long ldBm;
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWSENS \n");
+    if (pDevice->bLinkPass == TRUE) {
+        RFvRSSITodBm(pDevice, (BYTE)(pDevice->uCurrRSSI), &ldBm);
+	    wrq->value = ldBm;
+	}
+	else {
+	    wrq->value = 0;
+    };
+	wrq->disabled = (wrq->value == 0);
+	wrq->fixed = 1;
+
+
+	return 0;
+}
+
+//2008-0409-07, <Add> by Einsn Liu
+#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+
+int iwctl_siwauth(struct net_device *dev,
+			  struct iw_request_info *info,
+			  struct iw_param *wrq,
+			  char *extra)
+{
+	PSDevice			pDevice = (PSDevice)netdev_priv(dev);
+	PSMgmtObject	pMgmt = &(pDevice->sMgmtObj);
+	int ret=0;
+	static int wpa_version=0;  //must be static to save the last value,einsn liu
+	static int pairwise=0;
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWAUTH \n");
+	switch (wrq->flags & IW_AUTH_INDEX) {
+	case IW_AUTH_WPA_VERSION:
+		wpa_version = wrq->value;
+		if(wrq->value == IW_AUTH_WPA_VERSION_DISABLED) {
+		       printk("iwctl_siwauth:set WPADEV to disable at 1??????\n");
+			//pDevice->bWPADevEnable = FALSE;
+		}
+		else if(wrq->value == IW_AUTH_WPA_VERSION_WPA) {
+                          printk("iwctl_siwauth:set WPADEV to WPA1******\n");
+		}
+		else {
+                          printk("iwctl_siwauth:set WPADEV to WPA2******\n");
+		}
+		//pDevice->bWPASuppWextEnabled =TRUE;
+		break;
+	case IW_AUTH_CIPHER_PAIRWISE:
+		pairwise = wrq->value;
+
+		if(pairwise == IW_AUTH_CIPHER_CCMP){
+			pDevice->eEncryptionStatus = Ndis802_11Encryption3Enabled;
+		}else if(pairwise == IW_AUTH_CIPHER_TKIP){
+			pDevice->eEncryptionStatus = Ndis802_11Encryption2Enabled;
+		}else if(pairwise == IW_AUTH_CIPHER_WEP40||pairwise == IW_AUTH_CIPHER_WEP104){
+			pDevice->eEncryptionStatus = Ndis802_11Encryption1Enabled;
+		}else if(pairwise == IW_AUTH_CIPHER_NONE){
+			//do nothing,einsn liu
+		}else pDevice->eEncryptionStatus = Ndis802_11EncryptionDisabled;
+
+		break;
+	case IW_AUTH_CIPHER_GROUP:
+		if(wpa_version == IW_AUTH_WPA_VERSION_DISABLED)
+			break;
+		if(pairwise == IW_AUTH_CIPHER_NONE){
+			if(wrq->value == IW_AUTH_CIPHER_CCMP){
+				pDevice->eEncryptionStatus = Ndis802_11Encryption3Enabled;
+			}else {
+				pDevice->eEncryptionStatus = Ndis802_11Encryption2Enabled;
+			}
+		}
+		break;
+	case IW_AUTH_KEY_MGMT:
+
+		if(wpa_version == IW_AUTH_WPA_VERSION_WPA2){
+			if(wrq->value == IW_AUTH_KEY_MGMT_PSK)
+				pMgmt->eAuthenMode = WMAC_AUTH_WPA2PSK;
+			else pMgmt->eAuthenMode = WMAC_AUTH_WPA2;
+		}else if(wpa_version == IW_AUTH_WPA_VERSION_WPA){
+			if(wrq->value == 0){
+				pMgmt->eAuthenMode = WMAC_AUTH_WPANONE;
+			}else if(wrq->value == IW_AUTH_KEY_MGMT_PSK)
+				pMgmt->eAuthenMode = WMAC_AUTH_WPAPSK;
+			else pMgmt->eAuthenMode = WMAC_AUTH_WPA;
+		}
+
+		break;
+	case IW_AUTH_TKIP_COUNTERMEASURES:
+		break;		/* FIXME */
+	case IW_AUTH_DROP_UNENCRYPTED:
+		break;
+	case IW_AUTH_80211_AUTH_ALG:
+		if(wrq->value==IW_AUTH_ALG_OPEN_SYSTEM){
+			pMgmt->bShareKeyAlgorithm=FALSE;
+		}else if(wrq->value==IW_AUTH_ALG_SHARED_KEY){
+			pMgmt->bShareKeyAlgorithm=TRUE;
+		}
+		break;
+	case IW_AUTH_WPA_ENABLED:
+		//pDevice->bWPADevEnable = !! wrq->value;
+		break;
+	case IW_AUTH_RX_UNENCRYPTED_EAPOL:
+		break;
+	case IW_AUTH_ROAMING_CONTROL:
+		ret = -EOPNOTSUPP;
+		break;
+	case IW_AUTH_PRIVACY_INVOKED:
+		pDevice->bEncryptionEnable = !!wrq->value;
+		if(pDevice->bEncryptionEnable == FALSE){
+			wpa_version = 0;
+			pairwise = 0;
+			pDevice->eEncryptionStatus = Ndis802_11EncryptionDisabled;
+			pMgmt->bShareKeyAlgorithm = FALSE;
+			pMgmt->eAuthenMode = FALSE;
+			//pDevice->bWPADevEnable = FALSE;
+		}
+
+		break;
+	default:
+		ret = -EOPNOTSUPP;
+		break;
+	}
+/*
+	DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "wpa_version = %d\n",wpa_version);
+	DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "pairwise = %d\n",pairwise);
+	DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "pDevice->eEncryptionStatus = %d\n",pDevice->eEncryptionStatus);
+	DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "pMgmt->eAuthenMode  = %d\n",pMgmt->eAuthenMode);
+	DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "pMgmt->bShareKeyAlgorithm = %s\n",pMgmt->bShareKeyAlgorithm?"TRUE":"FALSE");
+	DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "pDevice->bEncryptionEnable = %s\n",pDevice->bEncryptionEnable?"TRUE":"FALSE");
+	DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "pDevice->bWPADevEnable = %s\n",pDevice->bWPADevEnable?"TRUE":"FALSE");
+*/
+   return ret;
+}
+
+
+int iwctl_giwauth(struct net_device *dev,
+			  struct iw_request_info *info,
+			  struct iw_param *wrq,
+			  char *extra)
+{
+	return -EOPNOTSUPP;
+}
+
+
+
+int iwctl_siwgenie(struct net_device *dev,
+			  struct iw_request_info *info,
+			  struct iw_point *wrq,
+			  char *extra)
+{
+	PSDevice			pDevice = (PSDevice)netdev_priv(dev);
+	PSMgmtObject	pMgmt = &(pDevice->sMgmtObj);
+	int ret=0;
+
+	if(wrq->length){
+		if ((wrq->length < 2) || (extra[1]+2 != wrq->length)) {
+			ret = -EINVAL;
+			goto out;
+		}
+		if(wrq->length > MAX_WPA_IE_LEN){
+			ret = -ENOMEM;
+			goto out;
+		}
+		memset(pMgmt->abyWPAIE, 0, MAX_WPA_IE_LEN);
+		if(copy_from_user(pMgmt->abyWPAIE, extra, wrq->length)){
+			ret = -EFAULT;
+			goto out;
+		}
+		pMgmt->wWPAIELen = wrq->length;
+	}else {
+		memset(pMgmt->abyWPAIE, 0, MAX_WPA_IE_LEN);
+		pMgmt->wWPAIELen = 0;
+	}
+
+	out://not completely ...not necessary in wpa_supplicant 0.5.8
+	return 0;
+}
+
+int iwctl_giwgenie(struct net_device *dev,
+			  struct iw_request_info *info,
+			  struct iw_point *wrq,
+			  char *extra)
+{
+	PSDevice			pDevice = (PSDevice)netdev_priv(dev);
+	PSMgmtObject	pMgmt = &(pDevice->sMgmtObj);
+	int ret=0;
+	int space = wrq->length;
+
+	wrq->length = 0;
+	if(pMgmt->wWPAIELen > 0){
+		wrq->length = pMgmt->wWPAIELen;
+		if(pMgmt->wWPAIELen <= space){
+			if(copy_to_user(extra, pMgmt->abyWPAIE, pMgmt->wWPAIELen)){
+				ret = -EFAULT;
+			}
+		}else
+			ret = -E2BIG;
+	}
+
+	return ret;
+}
+
+
+int iwctl_siwencodeext(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_point *wrq,
+             char *extra)
+{
+    PSDevice	        pDevice = (PSDevice)netdev_priv(dev);
+	struct iw_encode_ext *ext = (struct iw_encode_ext*)extra;
+    struct viawget_wpa_param *param=NULL;
+//original member
+    wpa_alg alg_name;
+    u8  addr[6];
+    int key_idx, set_tx;
+    u8  seq[IW_ENCODE_SEQ_MAX_SIZE];
+    u8 key[64];
+    size_t seq_len,key_len=0;
+//
+   // int ii;
+    u8 *buf;
+    size_t blen;
+    u8 key_array[64];
+    int ret=0;
+
+printk("SIOCSIWENCODEEXT...... \n");
+
+blen = sizeof(*param);
+buf = kmalloc((int)blen, (int)GFP_KERNEL);
+if (buf == NULL)
+    return -ENOMEM;
+memset(buf, 0, blen);
+param = (struct viawget_wpa_param *) buf;
+
+//recover alg_name
+switch (ext->alg) {
+    case IW_ENCODE_ALG_NONE:
+                  alg_name = WPA_ALG_NONE;
+		break;
+    case IW_ENCODE_ALG_WEP:
+                  alg_name = WPA_ALG_WEP;
+		break;
+    case IW_ENCODE_ALG_TKIP:
+                  alg_name = WPA_ALG_TKIP;
+		break;
+    case IW_ENCODE_ALG_CCMP:
+                  alg_name = WPA_ALG_CCMP;
+		break;
+    default:
+		printk("Unknown alg = %d\n",ext->alg);
+		ret= -ENOMEM;
+		goto error;
+		}
+//recover addr
+ memcpy(addr, ext->addr.sa_data, ETH_ALEN);
+//recover key_idx
+  key_idx = (wrq->flags&IW_ENCODE_INDEX) - 1;
+//recover set_tx
+if(ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)
+   set_tx = 1;
+//recover seq,seq_len
+	if(ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID) {
+   seq_len=IW_ENCODE_SEQ_MAX_SIZE;
+   memcpy(seq, ext->rx_seq, seq_len);
+		}
+//recover key,key_len
+if(ext->key_len) {
+  key_len=ext->key_len;
+  memcpy(key, &ext->key[0], key_len);
+	}
+
+memset(key_array, 0, 64);
+if ( key_len > 0) {
+     memcpy(key_array, key, key_len);
+    if (key_len == 32) {
+          // notice ! the oder
+	  memcpy(&key_array[16], &key[24], 8);
+	  memcpy(&key_array[24], &key[16], 8);
+	}
+	}
+
+/**************Translate iw_encode_ext to viawget_wpa_param****************/
+memcpy(param->addr, addr, ETH_ALEN);
+param->u.wpa_key.alg_name = (int)alg_name;
+param->u.wpa_key.set_tx = set_tx;
+param->u.wpa_key.key_index = key_idx;
+param->u.wpa_key.key_len = key_len;
+param->u.wpa_key.key = (u8 *)key_array;
+param->u.wpa_key.seq = (u8 *)seq;
+param->u.wpa_key.seq_len = seq_len;
+
+#if 0
+int ii;
+printk("param->u.wpa_key.alg_name =%d\n",param->u.wpa_key.alg_name);
+printk("param->addr=%02x:%02x:%02x:%02x:%02x:%02x\n",
+	      param->addr[0],param->addr[1],param->addr[2],
+	      param->addr[3],param->addr[4],param->addr[5]);
+printk("param->u.wpa_key.set_tx =%d\n",param->u.wpa_key.set_tx);
+printk("param->u.wpa_key.key_index =%d\n",param->u.wpa_key.key_index);
+printk("param->u.wpa_key.key_len =%d\n",param->u.wpa_key.key_len);
+printk("param->u.wpa_key.key =");
+for(ii=0;ii<param->u.wpa_key.key_len;ii++)
+	printk("%02x:",param->u.wpa_key.key[ii]);
+         printk("\n");
+printk("param->u.wpa_key.seq_len =%d\n",param->u.wpa_key.seq_len);
+printk("param->u.wpa_key.seq =");
+for(ii=0;ii<param->u.wpa_key.seq_len;ii++)
+	printk("%02x:",param->u.wpa_key.seq[ii]);
+         printk("\n");
+
+printk("...........\n");
+#endif
+//****set if current action is Network Manager count??
+//****this method is so foolish,but there is no other way???
+if(param->u.wpa_key.alg_name == WPA_ALG_NONE) {
+   if(param->u.wpa_key.key_index ==0) {
+     pDevice->bwextcount++;
+    }
+   if((pDevice->bwextcount == 1)&&(param->u.wpa_key.key_index ==1)) {
+ pDevice->bwextcount++;
+    }
+   if((pDevice->bwextcount ==2)&&(param->u.wpa_key.key_index ==2)) {
+ pDevice->bwextcount++;
+	}
+   if((pDevice->bwextcount ==3)&&(param->u.wpa_key.key_index ==3)) {
+ pDevice->bwextcount++;
+        }
+		 }
+if( pDevice->bwextcount == 4) {
+    printk("SIOCSIWENCODEEXT:Enable WPA WEXT SUPPORT!!!!!\n");
+ pDevice->bwextcount=0;
+   pDevice->bWPASuppWextEnabled = TRUE;
+		 }
+//******
+
+		spin_lock_irq(&pDevice->lock);
+ ret = wpa_set_keys(pDevice, param, TRUE);
+		spin_unlock_irq(&pDevice->lock);
+
+error:
+kfree(param);
+	return ret;
+}
+
+
+
+int iwctl_giwencodeext(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_point *wrq,
+             char *extra)
+{
+		return -EOPNOTSUPP;;
+}
+
+int iwctl_siwmlme(struct net_device *dev,
+				struct iw_request_info * info,
+				struct iw_point *wrq,
+				char *extra)
+{
+	PSDevice			pDevice = (PSDevice)netdev_priv(dev);
+	PSMgmtObject	pMgmt = &(pDevice->sMgmtObj);
+	struct iw_mlme *mlme = (struct iw_mlme *)extra;
+	//u16 reason = cpu_to_le16(mlme->reason_code);
+	int ret = 0;
+
+	if(memcmp(pMgmt->abyCurrBSSID, mlme->addr.sa_data, ETH_ALEN)){
+		ret = -EINVAL;
+		return ret;
+	}
+	switch(mlme->cmd){
+	case IW_MLME_DEAUTH:
+		//this command seems to be not complete,please test it --einsnliu
+		//bScheduleCommand((HANDLE) pDevice, WLAN_CMD_DEAUTH, (PBYTE)&reason);
+		break;
+	case IW_MLME_DISASSOC:
+		if(pDevice->bLinkPass == TRUE){
+					  printk("iwctl_siwmlme--->send DISASSOCIATE\n");
+		  //clear related flags
+		   memset(pMgmt->abyDesireBSSID, 0xFF,6);
+		KeyvInitTable(&pDevice->sKey, pDevice->PortOffset);
+			bScheduleCommand((HANDLE)pDevice, WLAN_CMD_DISASSOCIATE, NULL);
+		}
+		break;
+	default:
+		ret = -EOPNOTSUPP;
+	}
+
+	return ret;
+
+}
+
+#endif
+
+
+/*------------------------------------------------------------------*/
+/*
+ * Structures to export the Wireless Handlers
+ */
+
+
+#if WIRELESS_EXT > 12
+
+/*
+static const iw_handler		iwctl_handler[] =
+{
+	(iw_handler) iwctl_commit,      // SIOCSIWCOMMIT
+	(iw_handler) iwctl_giwname,     // SIOCGIWNAME
+	(iw_handler) NULL,				// SIOCSIWNWID
+	(iw_handler) NULL,				// SIOCGIWNWID
+	(iw_handler) iwctl_siwfreq,		// SIOCSIWFREQ
+	(iw_handler) iwctl_giwfreq,		// SIOCGIWFREQ
+	(iw_handler) iwctl_siwmode,		// SIOCSIWMODE
+	(iw_handler) iwctl_giwmode,		// SIOCGIWMODE
+	(iw_handler) NULL,		        // SIOCSIWSENS
+	(iw_handler) iwctl_giwsens,		        // SIOCGIWSENS
+	(iw_handler) NULL, 		        // SIOCSIWRANGE
+	(iw_handler) iwctl_giwrange,		// SIOCGIWRANGE
+	(iw_handler) NULL,         		    // SIOCSIWPRIV
+	(iw_handler) NULL,             		// SIOCGIWPRIV
+	(iw_handler) NULL,             		// SIOCSIWSTATS
+	(iw_handler) NULL,                  // SIOCGIWSTATS
+    (iw_handler) NULL,                  // SIOCSIWSPY
+	(iw_handler) NULL,		            // SIOCGIWSPY
+	(iw_handler) NULL,				    // -- hole --
+	(iw_handler) NULL,				    // -- hole --
+	(iw_handler) iwctl_siwap,		    // SIOCSIWAP
+	(iw_handler) iwctl_giwap,		    // SIOCGIWAP
+	(iw_handler) NULL,				    // -- hole -- 0x16
+	(iw_handler) iwctl_giwaplist,       // SIOCGIWAPLIST
+#if WIRELESS_EXT > 13
+	(iw_handler) iwctl_siwscan,         // SIOCSIWSCAN
+	(iw_handler) iwctl_giwscan,         // SIOCGIWSCAN
+#else
+	(iw_handler) NULL,
+	(iw_handler) NULL,
+#endif
+	(iw_handler) iwctl_siwessid,		// SIOCSIWESSID
+	(iw_handler) iwctl_giwessid,		// SIOCGIWESSID
+	(iw_handler) NULL,		// SIOCSIWNICKN
+	(iw_handler) NULL,		// SIOCGIWNICKN
+	(iw_handler) NULL,				    // -- hole --
+	(iw_handler) NULL,				    // -- hole --
+	(iw_handler) iwctl_siwrate,		// SIOCSIWRATE 0x20
+	(iw_handler) iwctl_giwrate,		// SIOCGIWRATE
+	(iw_handler) iwctl_siwrts,		// SIOCSIWRTS
+	(iw_handler) iwctl_giwrts,		// SIOCGIWRTS
+	(iw_handler) iwctl_siwfrag,		// SIOCSIWFRAG
+	(iw_handler) iwctl_giwfrag,		// SIOCGIWFRAG
+	(iw_handler) NULL,		// SIOCSIWTXPOW
+	(iw_handler) NULL,		// SIOCGIWTXPOW
+	(iw_handler) iwctl_siwretry,		// SIOCSIWRETRY
+	(iw_handler) iwctl_giwretry,		// SIOCGIWRETRY
+	(iw_handler) iwctl_siwencode,		// SIOCSIWENCODE
+	(iw_handler) iwctl_giwencode,		// SIOCGIWENCODE
+	(iw_handler) iwctl_siwpower,		// SIOCSIWPOWER
+	(iw_handler) iwctl_giwpower,		// SIOCGIWPOWER
+#if WIRELESS_EXT > 17
+	(iw_handler) NULL,			// -- hole --
+	(iw_handler) NULL,			// -- hole --
+	(iw_handler) iwctl_siwgenie,    // SIOCSIWGENIE
+	(iw_handler) iwctl_giwgenie,    // SIOCGIWGENIE
+	(iw_handler) iwctl_siwauth,		// SIOCSIWAUTH
+	(iw_handler) iwctl_giwauth,		// SIOCGIWAUTH
+	(iw_handler) iwctl_siwencodeext,		// SIOCSIWENCODEEXT
+	(iw_handler) iwctl_giwencodeext,		// SIOCGIWENCODEEXT
+	(iw_handler) NULL,				// SIOCSIWPMKSA
+	(iw_handler) NULL,				// -- hole --
+#endif // WIRELESS_EXT > 17
+
+};
+*/
+
+static const iw_handler		iwctl_handler[] =
+{
+	(iw_handler) iwctl_commit,      // SIOCSIWCOMMIT
+	(iw_handler) NULL,      // SIOCGIWNAME
+	(iw_handler) NULL,				// SIOCSIWNWID
+	(iw_handler) NULL,				// SIOCGIWNWID
+	(iw_handler) NULL,		// SIOCSIWFREQ
+	(iw_handler) NULL,		// SIOCGIWFREQ
+	(iw_handler) NULL,		// SIOCSIWMODE
+	(iw_handler) NULL,		// SIOCGIWMODE
+	(iw_handler) NULL,		        // SIOCSIWSENS
+	(iw_handler) NULL,		        // SIOCGIWSENS
+	(iw_handler) NULL, 		        // SIOCSIWRANGE
+	(iw_handler) iwctl_giwrange,		// SIOCGIWRANGE
+	(iw_handler) NULL,         		    // SIOCSIWPRIV
+	(iw_handler) NULL,             		// SIOCGIWPRIV
+	(iw_handler) NULL,             		// SIOCSIWSTATS
+	(iw_handler) NULL,                  // SIOCGIWSTATS
+    (iw_handler) NULL,                  // SIOCSIWSPY
+	(iw_handler) NULL,		            // SIOCGIWSPY
+	(iw_handler) NULL,				    // -- hole --
+	(iw_handler) NULL,				    // -- hole --
+	(iw_handler) NULL,		    // SIOCSIWAP
+	(iw_handler) NULL,		    // SIOCGIWAP
+	(iw_handler) NULL,				    // -- hole -- 0x16
+	(iw_handler) NULL,       // SIOCGIWAPLIST
+#if WIRELESS_EXT > 13
+	(iw_handler) iwctl_siwscan,         // SIOCSIWSCAN
+	(iw_handler) iwctl_giwscan,         // SIOCGIWSCAN
+#else
+	(iw_handler) NULL,
+	(iw_handler) NULL,
+#endif
+	(iw_handler) NULL,		// SIOCSIWESSID
+	(iw_handler) NULL,		// SIOCGIWESSID
+	(iw_handler) NULL,		// SIOCSIWNICKN
+	(iw_handler) NULL,		// SIOCGIWNICKN
+	(iw_handler) NULL,		// -- hole --
+	(iw_handler) NULL,		// -- hole --
+	(iw_handler) NULL,		// SIOCSIWRATE 0x20
+	(iw_handler) NULL,		// SIOCGIWRATE
+	(iw_handler) NULL,		// SIOCSIWRTS
+	(iw_handler) NULL,		// SIOCGIWRTS
+	(iw_handler) NULL,		// SIOCSIWFRAG
+	(iw_handler) NULL,		// SIOCGIWFRAG
+	(iw_handler) NULL,		// SIOCSIWTXPOW
+	(iw_handler) NULL,		// SIOCGIWTXPOW
+	(iw_handler) NULL,		// SIOCSIWRETRY
+	(iw_handler) NULL,		// SIOCGIWRETRY
+	(iw_handler) NULL,		// SIOCSIWENCODE
+	(iw_handler) NULL,		// SIOCGIWENCODE
+	(iw_handler) NULL,		// SIOCSIWPOWER
+	(iw_handler) NULL,		// SIOCGIWPOWER
+
+//2008-0409-07, <Add> by Einsn Liu
+#if WIRELESS_EXT > 17
+	(iw_handler) NULL,			// -- hole --
+	(iw_handler) NULL,			// -- hole --
+	(iw_handler) NULL,    // SIOCSIWGENIE
+	(iw_handler) NULL,    // SIOCGIWGENIE
+	(iw_handler) NULL,		// SIOCSIWAUTH
+	(iw_handler) NULL,		// SIOCGIWAUTH
+	(iw_handler) NULL,		// SIOCSIWENCODEEXT
+	(iw_handler) NULL,		// SIOCGIWENCODEEXT
+	(iw_handler) NULL,				// SIOCSIWPMKSA
+	(iw_handler) NULL,				// -- hole --
+#endif // WIRELESS_EXT > 17
+};
+
+
+static const iw_handler		iwctl_private_handler[] =
+{
+	NULL,				// SIOCIWFIRSTPRIV
+};
+
+
+struct iw_priv_args iwctl_private_args[] = {
+{ IOCTL_CMD_SET,
+  IW_PRIV_TYPE_CHAR | 1024, 0,
+  "set"},
+};
+
+
+
+const struct iw_handler_def	iwctl_handler_def =
+{
+#if WIRELESS_EXT > 16
+	.get_wireless_stats = &iwctl_get_wireless_stats,
+#endif
+	.num_standard	= sizeof(iwctl_handler)/sizeof(iw_handler),
+//	.num_private	= sizeof(iwctl_private_handler)/sizeof(iw_handler),
+//	.num_private_args = sizeof(iwctl_private_args)/sizeof(struct iw_priv_args),
+	.num_private	= 0,
+	.num_private_args = 0,
+	.standard	= (iw_handler *) iwctl_handler,
+//	.private	= (iw_handler *) iwctl_private_handler,
+//	.private_args	= (struct iw_priv_args *)iwctl_private_args,
+	.private	= NULL,
+	.private_args	= NULL,
+};
+
+
+#endif // WIRELESS_EXT > 12
+
+
+#endif // WIRELESS_EXT
diff --git a/drivers/staging/vt6655/iwctl.h b/drivers/staging/vt6655/iwctl.h
new file mode 100644
index 00000000000..07554e14d5f
--- /dev/null
+++ b/drivers/staging/vt6655/iwctl.h
@@ -0,0 +1,332 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: iwctl.h
+ *
+ * Purpose:
+ *
+ * Author: Lyndon Chen
+ *
+ * Date: May 21, 2004
+ *
+ */
+
+
+#ifndef __IWCTL_H__
+#define __IWCTL_H__
+
+#if !defined(__DEVICE_H__)
+#include "device.h"
+#endif
+
+
+/*---------------------  Export Definitions -------------------------*/
+
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+
+
+#ifdef __cplusplus
+extern "C" {                            /* Assume C declarations for C++ */
+#endif /* __cplusplus */
+
+
+#if WIRELESS_EXT < 18
+
+
+#define SIOCSIWMLME	        0x8B16
+#define SIOCSIWGENIE	    0x8B30
+
+// WPA : Authentication mode parameters
+#define SIOCSIWAUTH	        0x8B32
+#define SIOCGIWAUTH	        0x8B33
+
+// WPA : Extended version of encoding configuration
+#define SIOCSIWENCODEEXT    0x8B34
+#define SIOCGIWENCODEEXT    0x8B35
+
+#define IW_AUTH_WPA_VERSION		0
+#define IW_AUTH_CIPHER_PAIRWISE		1
+#define IW_AUTH_CIPHER_GROUP		2
+#define IW_AUTH_KEY_MGMT		3
+#define IW_AUTH_TKIP_COUNTERMEASURES	4
+#define IW_AUTH_DROP_UNENCRYPTED	5
+#define IW_AUTH_80211_AUTH_ALG		6
+#define IW_AUTH_WPA_ENABLED		7
+#define IW_AUTH_RX_UNENCRYPTED_EAPOL	8
+#define IW_AUTH_ROAMING_CONTROL		9
+#define IW_AUTH_PRIVACY_INVOKED		10
+
+#define IW_AUTH_WPA_VERSION_DISABLED	0x00000001
+#define IW_AUTH_WPA_VERSION_WPA		0x00000002
+#define IW_AUTH_WPA_VERSION_WPA2	0x00000004
+
+#define IW_AUTH_CIPHER_NONE	    0x00000001
+#define IW_AUTH_CIPHER_WEP40	0x00000002
+#define IW_AUTH_CIPHER_TKIP	    0x00000004
+#define IW_AUTH_CIPHER_CCMP	    0x00000008
+#define IW_AUTH_CIPHER_WEP104	0x00000010
+
+#define IW_AUTH_KEY_MGMT_802_1X	1
+#define IW_AUTH_KEY_MGMT_PSK	2
+
+#define IW_AUTH_ALG_OPEN_SYSTEM	0x00000001
+#define IW_AUTH_ALG_SHARED_KEY	0x00000002
+#define IW_AUTH_ALG_LEAP	0x00000004
+
+#define IW_AUTH_ROAMING_ENABLE	0
+#define IW_AUTH_ROAMING_DISABLE	1
+
+#define IW_ENCODE_SEQ_MAX_SIZE	8
+
+#define IW_ENCODE_ALG_NONE	0
+#define IW_ENCODE_ALG_WEP	1
+#define IW_ENCODE_ALG_TKIP	2
+#define IW_ENCODE_ALG_CCMP	3
+
+
+struct	iw_encode_ext
+{
+	__u32		ext_flags; // IW_ENCODE_EXT_*
+	__u8		tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; // LSB first
+	__u8		rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; // LSB first
+	struct sockaddr	addr; // ff:ff:ff:ff:ff:ff for broadcast/multicast
+			              // (group) keys or unicast address for
+			              // individual keys
+	__u16		alg; // IW_ENCODE_ALG_*
+	__u16		key_len;
+	__u8		key[0];
+};
+
+
+struct	iw_mlme
+{
+	__u16		cmd; /* IW_MLME_* */
+	__u16		reason_code;
+	struct sockaddr	addr;
+};
+
+#endif // WIRELESS_EXT < 18
+
+
+
+#ifdef WIRELESS_EXT
+
+struct iw_statistics *iwctl_get_wireless_stats (struct net_device *dev);
+
+
+int iwctl_siwap(struct net_device *dev,
+             struct iw_request_info *info,
+			 struct sockaddr *wrq,
+             char *extra);
+
+int iwctl_giwrange(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_point *wrq,
+             char *extra);
+
+
+int iwctl_giwmode(struct net_device *dev,
+             struct iw_request_info *info,
+             __u32 *wmode,
+             char *extra);
+
+int iwctl_siwmode(struct net_device *dev,
+             struct iw_request_info *info,
+             __u32 *wmode,
+             char *extra);
+
+int iwctl_giwfreq(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_freq *wrq,
+             char *extra);
+
+int iwctl_siwfreq(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_freq *wrq,
+             char *extra);
+
+int iwctl_giwname(struct net_device *dev,
+			 struct iw_request_info *info,
+			 char *wrq,
+			 char *extra);
+
+int iwctl_giwnwid(struct net_device *dev,
+             struct iw_request_info *info,
+			 struct iw_param *wrq,
+                   char *extra) ;
+
+int iwctl_giwsens(struct net_device *dev,
+			 struct iw_request_info *info,
+			 struct iw_param *wrq,
+			 char *extra);
+
+int iwctl_giwap(struct net_device *dev,
+             struct iw_request_info *info,
+			 struct sockaddr *wrq,
+             char *extra);
+
+int iwctl_giwaplist(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_point *wrq,
+             char *extra);
+
+int iwctl_siwessid(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_point *wrq,
+             char *extra);
+
+int iwctl_giwessid(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_point *wrq,
+             char *extra);
+
+int iwctl_siwrate(struct net_device *dev,
+             struct iw_request_info *info,
+			 struct iw_param *wrq,
+             char *extra);
+
+int iwctl_giwrate(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_param *wrq,
+             char *extra);
+
+int iwctl_siwrts(struct net_device *dev,
+             struct iw_request_info *info,
+			 struct iw_param *wrq,
+             char *extra);
+
+
+int iwctl_giwrts(struct net_device *dev,
+             struct iw_request_info *info,
+			 struct iw_param *wrq,
+             char *extra);
+
+int iwctl_siwfrag(struct net_device *dev,
+             struct iw_request_info *info,
+			 struct iw_param *wrq,
+             char *extra);
+
+int iwctl_giwfrag(struct net_device *dev,
+             struct iw_request_info *info,
+			 struct iw_param *wrq,
+             char *extra);
+
+int iwctl_siwretry(struct net_device *dev,
+             struct iw_request_info *info,
+			 struct iw_param *wrq,
+             char *extra);
+
+int iwctl_giwretry(struct net_device *dev,
+             struct iw_request_info *info,
+			 struct iw_param *wrq,
+             char *extra);
+
+int iwctl_siwencode(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_point *wrq,
+             char *extra);
+
+int iwctl_giwencode(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_point *wrq,
+             char *extra);
+
+int iwctl_siwpower(struct net_device *dev,
+             struct iw_request_info *info,
+			 struct iw_param *wrq,
+             char *extra);
+
+int iwctl_giwpower(struct net_device *dev,
+             struct iw_request_info *info,
+			 struct iw_param *wrq,
+             char *extra);
+
+int iwctl_giwscan(struct net_device *dev,
+             struct iw_request_info *info,
+			 struct iw_point *wrq,
+             char *extra);
+
+int iwctl_siwscan(struct net_device *dev,
+             struct iw_request_info *info,
+			 struct iw_param *wrq,
+             char *extra);
+
+//2008-0409-07, <Add> by Einsn Liu
+#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+int iwctl_siwauth(struct net_device *dev,
+			  struct iw_request_info *info,
+			  struct iw_param *wrq,
+			  char *extra);
+
+int iwctl_giwauth(struct net_device *dev,
+			  struct iw_request_info *info,
+			  struct iw_param *wrq,
+			  char *extra);
+
+int iwctl_siwgenie(struct net_device *dev,
+			  struct iw_request_info *info,
+			  struct iw_point *wrq,
+			  char *extra);
+
+int iwctl_giwgenie(struct net_device *dev,
+			  struct iw_request_info *info,
+			  struct iw_point *wrq,
+			  char *extra);
+
+int iwctl_siwencodeext(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_point *wrq,
+             char *extra);
+
+int iwctl_giwencodeext(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_point *wrq,
+             char *extra);
+
+int iwctl_siwmlme(struct net_device *dev,
+			struct iw_request_info * info,
+			struct iw_point *wrq,
+			char *extra);
+#endif // #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+
+
+#endif
+
+#if WIRELESS_EXT > 12
+extern const struct iw_handler_def	iwctl_handler_def;
+extern const struct iw_priv_args	iwctl_private_args;
+#else
+struct iw_request_info {};
+#endif	//WIRELESS_EXT > 12
+
+#ifdef __cplusplus
+}                                       /* End of extern "C" { */
+#endif /* __cplusplus */
+
+
+
+
+#endif // __IWCTL_H__
+
+
+
diff --git a/drivers/staging/vt6655/kcompat.h b/drivers/staging/vt6655/kcompat.h
new file mode 100644
index 00000000000..652c2c78b0f
--- /dev/null
+++ b/drivers/staging/vt6655/kcompat.h
@@ -0,0 +1,84 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: kcompat.h
+ *
+ * Purpose: define kernel compatibility header
+ *
+ * Author: Lyndon Chen
+ *
+ * Date: Apr 8, 2002
+ *
+ */
+#ifndef _KCOMPAT_H
+#define _KCOMPAT_H
+
+#include <linux/version.h>
+
+#ifndef __init
+#define __init
+#endif
+
+#ifndef __exit
+#define __exit
+#endif
+
+#ifndef __devexit
+#define __devexit
+#endif
+
+#ifndef __devinitdata
+#define __devinitdata
+#endif
+
+#ifndef MODULE_LICENSE
+#define MODULE_LICENSE(license)
+#endif
+
+#ifndef MOD_INC_USE_COUNT
+#define MOD_INC_USE_COUNT do {} while (0)
+#endif
+
+#ifndef MOD_DEC_USE_COUNT
+#define MOD_DEC_USE_COUNT do {} while (0)
+#endif
+
+#ifndef HAVE_NETDEV_PRIV
+#define netdev_priv(dev) (dev->priv)
+#endif
+
+#ifndef IRQ_RETVAL
+typedef void irqreturn_t;
+
+#ifdef PRIVATE_OBJ
+#define IRQ_RETVAL(x)   (int)x
+#else
+#define IRQ_RETVAL(x)
+#endif
+
+#endif
+
+
+#ifndef MODULE_LICESEN
+#define MODULE_LICESEN(x)
+#endif
+
+
+#endif
+
diff --git a/drivers/staging/vt6655/key.c b/drivers/staging/vt6655/key.c
new file mode 100644
index 00000000000..168ebd3be94
--- /dev/null
+++ b/drivers/staging/vt6655/key.c
@@ -0,0 +1,836 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: key.c
+ *
+ * Purpose: Implement functions for 802.11i Key management
+ *
+ * Author: Jerry Chen
+ *
+ * Date: May 29, 2003
+ *
+ * Functions:
+ *      KeyvInitTable - Init Key management table
+ *      KeybGetKey - Get Key from table
+ *      KeybSetKey - Set Key to table
+ *      KeybRemoveKey - Remove Key from table
+ *      KeybGetTransmitKey - Get Transmit Key from table
+ *
+ * Revision History:
+ *
+ */
+
+
+#if !defined(__TMACRO_H__)
+#include "tmacro.h"
+#endif
+#if !defined(__TBIT_H__)
+#include "tbit.h"
+#endif
+#if !defined(__KEY_H__)
+#include "key.h"
+#endif
+#if !defined(__UMEM_H__)
+#include "umem.h"
+#endif
+#if !defined(__MAC_H__)
+#include "mac.h"
+#endif
+
+
+/*---------------------  Static Definitions -------------------------*/
+
+/*---------------------  Static Classes  ----------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+static int          msglevel                =MSG_LEVEL_INFO;
+//static int          msglevel                =MSG_LEVEL_DEBUG;
+/*---------------------  Static Functions  --------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Static Definitions -------------------------*/
+
+/*---------------------  Static Classes  ----------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+
+/*---------------------  Static Functions  --------------------------*/
+static VOID
+s_vCheckKeyTableValid (PSKeyManagement pTable, DWORD_PTR dwIoBase)
+{
+    int i;
+
+    for (i=0;i<MAX_KEY_TABLE;i++) {
+        if ((pTable->KeyTable[i].bInUse == TRUE) &&
+            (pTable->KeyTable[i].PairwiseKey.bKeyValid == FALSE) &&
+            (pTable->KeyTable[i].GroupKey[0].bKeyValid == FALSE) &&
+            (pTable->KeyTable[i].GroupKey[1].bKeyValid == FALSE) &&
+            (pTable->KeyTable[i].GroupKey[2].bKeyValid == FALSE) &&
+            (pTable->KeyTable[i].GroupKey[3].bKeyValid == FALSE)
+            ) {
+            pTable->KeyTable[i].bInUse = FALSE;
+            pTable->KeyTable[i].wKeyCtl = 0;
+            pTable->KeyTable[i].bSoftWEP = FALSE;
+            MACvDisableKeyEntry(dwIoBase, i);
+        }
+    }
+}
+
+
+/*---------------------  Export Functions  --------------------------*/
+
+
+/*
+ * Description: Init Key management table
+ *
+ * Parameters:
+ *  In:
+ *      pTable          - Pointer to Key table
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+VOID KeyvInitTable (PSKeyManagement pTable, DWORD_PTR dwIoBase)
+{
+    int i;
+    int jj;
+
+    for (i=0;i<MAX_KEY_TABLE;i++) {
+        pTable->KeyTable[i].bInUse = FALSE;
+        pTable->KeyTable[i].PairwiseKey.bKeyValid = FALSE;
+        pTable->KeyTable[i].PairwiseKey.pvKeyTable = (PVOID)&pTable->KeyTable[i];
+        for (jj=0; jj < MAX_GROUP_KEY; jj++) {
+            pTable->KeyTable[i].GroupKey[jj].bKeyValid = FALSE;
+            pTable->KeyTable[i].GroupKey[jj].pvKeyTable = (PVOID)&pTable->KeyTable[i];
+        }
+        pTable->KeyTable[i].wKeyCtl = 0;
+        pTable->KeyTable[i].dwGTKeyIndex = 0;
+        pTable->KeyTable[i].bSoftWEP = FALSE;
+        MACvDisableKeyEntry(dwIoBase, i);
+    }
+}
+
+
+/*
+ * Description: Get Key from table
+ *
+ * Parameters:
+ *  In:
+ *      pTable          - Pointer to Key table
+ *      pbyBSSID        - BSSID of Key
+ *      dwKeyIndex      - Key Index (0xFFFFFFFF means pairwise key)
+ *  Out:
+ *      pKey            - Key return
+ *
+ * Return Value: TRUE if found otherwise FALSE
+ *
+ */
+BOOL KeybGetKey (
+    IN  PSKeyManagement pTable,
+    IN  PBYTE           pbyBSSID,
+    IN  DWORD           dwKeyIndex,
+    OUT PSKeyItem       *pKey
+    )
+{
+    int i;
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"KeybGetKey() \n");
+
+    *pKey = NULL;
+    for (i=0;i<MAX_KEY_TABLE;i++) {
+        if ((pTable->KeyTable[i].bInUse == TRUE) &&
+            IS_ETH_ADDRESS_EQUAL(pTable->KeyTable[i].abyBSSID,pbyBSSID)) {
+            if (dwKeyIndex == 0xFFFFFFFF) {
+                if (pTable->KeyTable[i].PairwiseKey.bKeyValid == TRUE) {
+                    *pKey = &(pTable->KeyTable[i].PairwiseKey);
+                    return (TRUE);
+                }
+                else {
+                    return (FALSE);
+                }
+            } else if (dwKeyIndex < MAX_GROUP_KEY) {
+                if (pTable->KeyTable[i].GroupKey[dwKeyIndex].bKeyValid == TRUE) {
+                    *pKey = &(pTable->KeyTable[i].GroupKey[dwKeyIndex]);
+                    return (TRUE);
+                }
+                else {
+                    return (FALSE);
+                }
+            }
+            else {
+                return (FALSE);
+            }
+        }
+    }
+    return (FALSE);
+}
+
+
+/*
+ * Description: Set Key to table
+ *
+ * Parameters:
+ *  In:
+ *      pTable          - Pointer to Key table
+ *      pbyBSSID        - BSSID of Key
+ *      dwKeyIndex      - Key index (reference to NDIS DDK)
+ *      uKeyLength      - Key length
+ *      KeyRSC          - Key RSC
+ *      pbyKey          - Pointer to key
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if success otherwise FALSE
+ *
+ */
+BOOL KeybSetKey (
+    PSKeyManagement pTable,
+    PBYTE           pbyBSSID,
+    DWORD           dwKeyIndex,
+    ULONG           uKeyLength,
+    PQWORD          pKeyRSC,
+    PBYTE           pbyKey,
+    BYTE            byKeyDecMode,
+    DWORD_PTR       dwIoBase,
+    BYTE            byLocalID
+    )
+{
+    int         i,j;
+    UINT        ii;
+    PSKeyItem   pKey;
+    UINT        uKeyIdx;
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Enter KeybSetKey: %lX\n", dwKeyIndex);
+
+    j = (MAX_KEY_TABLE-1);
+    for (i=0;i<(MAX_KEY_TABLE-1);i++) {
+        if ((pTable->KeyTable[i].bInUse == FALSE) &&
+            (j == (MAX_KEY_TABLE-1))) {
+            // found empty table
+            j = i;
+        }
+        if ((pTable->KeyTable[i].bInUse == TRUE) &&
+            IS_ETH_ADDRESS_EQUAL(pTable->KeyTable[i].abyBSSID,pbyBSSID)) {
+            // found table already exist
+            if ((dwKeyIndex & PAIRWISE_KEY) != 0) {
+                // Pairwise key
+                pKey = &(pTable->KeyTable[i].PairwiseKey);
+                pTable->KeyTable[i].wKeyCtl &= 0xFFF0;          // clear pairwise key control filed
+                pTable->KeyTable[i].wKeyCtl |= byKeyDecMode;
+                uKeyIdx = 4;                                    // use HW key entry 4 for pairwise key
+            } else {
+                // Group key
+                if ((dwKeyIndex & 0x000000FF) >= MAX_GROUP_KEY)
+                    return (FALSE);
+                pKey = &(pTable->KeyTable[i].GroupKey[dwKeyIndex & 0x000000FF]);
+                if ((dwKeyIndex & TRANSMIT_KEY) != 0)  {
+                    // Group transmit key
+                    pTable->KeyTable[i].dwGTKeyIndex = dwKeyIndex;
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Group transmit key(R)[%lX]: %d\n", pTable->KeyTable[i].dwGTKeyIndex, i);
+                }
+                pTable->KeyTable[i].wKeyCtl &= 0xFF0F;          // clear group key control filed
+                pTable->KeyTable[i].wKeyCtl |= (byKeyDecMode << 4);
+                pTable->KeyTable[i].wKeyCtl |= 0x0040;          // use group key for group address
+                uKeyIdx = (dwKeyIndex & 0x000000FF);
+            }
+            pTable->KeyTable[i].wKeyCtl |= 0x8000;              // enable on-fly
+
+            pKey->bKeyValid = TRUE;
+            pKey->uKeyLength = uKeyLength;
+            pKey->dwKeyIndex = dwKeyIndex;
+            pKey->byCipherSuite = byKeyDecMode;
+            MEMvCopy(pKey->abyKey, pbyKey, uKeyLength);
+            if (byKeyDecMode == KEY_CTL_WEP) {
+                if (uKeyLength == WLAN_WEP40_KEYLEN)
+                    pKey->abyKey[15] &= 0x7F;
+                if (uKeyLength == WLAN_WEP104_KEYLEN)
+                    pKey->abyKey[15] |= 0x80;
+            }
+            MACvSetKeyEntry(dwIoBase, pTable->KeyTable[i].wKeyCtl, i, uKeyIdx, pbyBSSID, (PDWORD)pKey->abyKey, byLocalID);
+
+            if ((dwKeyIndex & USE_KEYRSC) == 0) {
+                // RSC set by NIC
+                ZERO_MEMORY(&(pKey->KeyRSC), sizeof(QWORD));
+            }
+            else {
+                MEMvCopy(&(pKey->KeyRSC), pKeyRSC,  sizeof(QWORD));
+            }
+            pKey->dwTSC47_16 = 0;
+            pKey->wTSC15_0 = 0;
+
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"KeybSetKey(R): \n");
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->bKeyValid: %d\n ", pKey->bKeyValid);
+            //DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->uKeyLength: %d\n ", pKey->uKeyLength);
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->abyKey: ");
+            for (ii = 0; ii < pKey->uKeyLength; ii++) {
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%02x ", pKey->abyKey[ii]);
+            }
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\n");
+
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwTSC47_16: %lx\n ", pKey->dwTSC47_16);
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->wTSC15_0: %x\n ", pKey->wTSC15_0);
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwKeyIndex: %lx\n ", pKey->dwKeyIndex);
+
+            return (TRUE);
+        }
+    }
+    if (j < (MAX_KEY_TABLE-1)) {
+        MEMvCopy(pTable->KeyTable[j].abyBSSID,pbyBSSID,U_ETHER_ADDR_LEN);
+        pTable->KeyTable[j].bInUse = TRUE;
+        if ((dwKeyIndex & PAIRWISE_KEY) != 0)  {
+            // Pairwise key
+            pKey = &(pTable->KeyTable[j].PairwiseKey);
+            pTable->KeyTable[j].wKeyCtl &= 0xFFF0;          // clear pairwise key control filed
+            pTable->KeyTable[j].wKeyCtl |= byKeyDecMode;
+            uKeyIdx = 4;                                    // use HW key entry 4 for pairwise key
+        } else {
+            // Group key
+            if ((dwKeyIndex & 0x000000FF) >= MAX_GROUP_KEY)
+                return (FALSE);
+            pKey = &(pTable->KeyTable[j].GroupKey[dwKeyIndex & 0x000000FF]);
+            if ((dwKeyIndex & TRANSMIT_KEY) != 0)  {
+                // Group transmit key
+                pTable->KeyTable[j].dwGTKeyIndex = dwKeyIndex;
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Group transmit key(N)[%lX]: %d\n", pTable->KeyTable[j].dwGTKeyIndex, j);
+            }
+            pTable->KeyTable[j].wKeyCtl &= 0xFF0F;          // clear group key control filed
+            pTable->KeyTable[j].wKeyCtl |= (byKeyDecMode << 4);
+            pTable->KeyTable[j].wKeyCtl |= 0x0040;          // use group key for group address
+            uKeyIdx = (dwKeyIndex & 0x000000FF);
+        }
+        pTable->KeyTable[j].wKeyCtl |= 0x8000;              // enable on-fly
+
+        pKey->bKeyValid = TRUE;
+        pKey->uKeyLength = uKeyLength;
+        pKey->dwKeyIndex = dwKeyIndex;
+        pKey->byCipherSuite = byKeyDecMode;
+        MEMvCopy(pKey->abyKey, pbyKey, uKeyLength);
+        if (byKeyDecMode == KEY_CTL_WEP) {
+            if (uKeyLength == WLAN_WEP40_KEYLEN)
+                pKey->abyKey[15] &= 0x7F;
+            if (uKeyLength == WLAN_WEP104_KEYLEN)
+                pKey->abyKey[15] |= 0x80;
+        }
+        MACvSetKeyEntry(dwIoBase, pTable->KeyTable[j].wKeyCtl, j, uKeyIdx, pbyBSSID, (PDWORD)pKey->abyKey, byLocalID);
+
+        if ((dwKeyIndex & USE_KEYRSC) == 0) {
+            // RSC set by NIC
+            ZERO_MEMORY(&(pKey->KeyRSC), sizeof(QWORD));
+        }
+        else {
+            MEMvCopy(&(pKey->KeyRSC), pKeyRSC,  sizeof(QWORD));
+        }
+        pKey->dwTSC47_16 = 0;
+        pKey->wTSC15_0 = 0;
+
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"KeybSetKey(N): \n");
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->bKeyValid: %d\n ", pKey->bKeyValid);
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->uKeyLength: %d\n ", (int)pKey->uKeyLength);
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->abyKey: ");
+        for (ii = 0; ii < pKey->uKeyLength; ii++) {
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%02x ", pKey->abyKey[ii]);
+        }
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\n");
+
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwTSC47_16: %lx\n ", pKey->dwTSC47_16);
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->wTSC15_0: %x\n ", pKey->wTSC15_0);
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwKeyIndex: %lx\n ", pKey->dwKeyIndex);
+
+        return (TRUE);
+    }
+    return (FALSE);
+}
+
+
+/*
+ * Description: Remove Key from table
+ *
+ * Parameters:
+ *  In:
+ *      pTable          - Pointer to Key table
+ *      pbyBSSID        - BSSID of Key
+ *      dwKeyIndex      - Key Index (reference to NDIS DDK)
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if success otherwise FALSE
+ *
+ */
+BOOL KeybRemoveKey (
+    PSKeyManagement pTable,
+    PBYTE           pbyBSSID,
+    DWORD           dwKeyIndex,
+    DWORD_PTR       dwIoBase
+    )
+{
+    int  i;
+
+    if (IS_BROADCAST_ADDRESS(pbyBSSID)) {
+        // dealte all key
+        if ((dwKeyIndex & PAIRWISE_KEY) != 0) {
+            for (i=0;i<MAX_KEY_TABLE;i++) {
+                pTable->KeyTable[i].PairwiseKey.bKeyValid = FALSE;
+            }
+            s_vCheckKeyTableValid(pTable, dwIoBase);
+            return TRUE;
+        }
+        else if ((dwKeyIndex & 0x000000FF) < MAX_GROUP_KEY) {
+            for (i=0;i<MAX_KEY_TABLE;i++) {
+                pTable->KeyTable[i].GroupKey[dwKeyIndex & 0x000000FF].bKeyValid = FALSE;
+                if ((dwKeyIndex & 0x7FFFFFFF) == (pTable->KeyTable[i].dwGTKeyIndex & 0x7FFFFFFF)) {
+                    // remove Group transmit key
+                    pTable->KeyTable[i].dwGTKeyIndex = 0;
+                }
+            }
+            s_vCheckKeyTableValid(pTable, dwIoBase);
+            return TRUE;
+        }
+        else {
+            return FALSE;
+        }
+    }
+
+    for (i=0;i<MAX_KEY_TABLE;i++) {
+        if ((pTable->KeyTable[i].bInUse == TRUE) &&
+            IS_ETH_ADDRESS_EQUAL(pTable->KeyTable[i].abyBSSID,pbyBSSID)) {
+            if ((dwKeyIndex & PAIRWISE_KEY) != 0) {
+                pTable->KeyTable[i].PairwiseKey.bKeyValid = FALSE;
+                s_vCheckKeyTableValid(pTable, dwIoBase);
+                return (TRUE);
+            }
+            else if ((dwKeyIndex & 0x000000FF) < MAX_GROUP_KEY) {
+                pTable->KeyTable[i].GroupKey[dwKeyIndex & 0x000000FF].bKeyValid = FALSE;
+                if ((dwKeyIndex & 0x7FFFFFFF) == (pTable->KeyTable[i].dwGTKeyIndex & 0x7FFFFFFF)) {
+                    // remove Group transmit key
+                    pTable->KeyTable[i].dwGTKeyIndex = 0;
+                }
+                s_vCheckKeyTableValid(pTable, dwIoBase);
+                return (TRUE);
+            }
+            else {
+                return (FALSE);
+            }
+        }
+    }
+    return (FALSE);
+}
+
+
+/*
+ * Description: Remove Key from table
+ *
+ * Parameters:
+ *  In:
+ *      pTable          - Pointer to Key table
+ *      pbyBSSID        - BSSID of Key
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if success otherwise FALSE
+ *
+ */
+BOOL KeybRemoveAllKey (
+    PSKeyManagement pTable,
+    PBYTE           pbyBSSID,
+    DWORD_PTR       dwIoBase
+    )
+{
+    int  i,u;
+
+    for (i=0;i<MAX_KEY_TABLE;i++) {
+        if ((pTable->KeyTable[i].bInUse == TRUE) &&
+            IS_ETH_ADDRESS_EQUAL(pTable->KeyTable[i].abyBSSID,pbyBSSID)) {
+            pTable->KeyTable[i].PairwiseKey.bKeyValid = FALSE;
+            for(u=0;u<MAX_GROUP_KEY;u++) {
+                pTable->KeyTable[i].GroupKey[u].bKeyValid = FALSE;
+            }
+            pTable->KeyTable[i].dwGTKeyIndex = 0;
+            s_vCheckKeyTableValid(pTable, dwIoBase);
+            return (TRUE);
+        }
+    }
+    return (FALSE);
+}
+
+/*
+ * Description: Remove WEP Key from table
+ *
+ * Parameters:
+ *  In:
+ *      pTable          - Pointer to Key table
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if success otherwise FALSE
+ *
+ */
+VOID KeyvRemoveWEPKey (
+    PSKeyManagement pTable,
+    DWORD           dwKeyIndex,
+    DWORD_PTR       dwIoBase
+    )
+{
+
+   if ((dwKeyIndex & 0x000000FF) < MAX_GROUP_KEY) {
+        if (pTable->KeyTable[MAX_KEY_TABLE-1].bInUse == TRUE) {
+            if (pTable->KeyTable[MAX_KEY_TABLE-1].GroupKey[dwKeyIndex & 0x000000FF].byCipherSuite == KEY_CTL_WEP) {
+                pTable->KeyTable[MAX_KEY_TABLE-1].GroupKey[dwKeyIndex & 0x000000FF].bKeyValid = FALSE;
+                if ((dwKeyIndex & 0x7FFFFFFF) == (pTable->KeyTable[MAX_KEY_TABLE-1].dwGTKeyIndex & 0x7FFFFFFF)) {
+                    // remove Group transmit key
+                    pTable->KeyTable[MAX_KEY_TABLE-1].dwGTKeyIndex = 0;
+                }
+            }
+        }
+        s_vCheckKeyTableValid(pTable, dwIoBase);
+    }
+    return;
+}
+
+VOID KeyvRemoveAllWEPKey (
+    PSKeyManagement pTable,
+    DWORD_PTR       dwIoBase
+    )
+{
+    int i;
+
+    for(i=0;i<MAX_GROUP_KEY;i++) {
+        KeyvRemoveWEPKey(pTable, i, dwIoBase);
+    }
+}
+
+/*
+ * Description: Get Transmit Key from table
+ *
+ * Parameters:
+ *  In:
+ *      pTable          - Pointer to Key table
+ *      pbyBSSID        - BSSID of Key
+ *  Out:
+ *      pKey            - Key return
+ *
+ * Return Value: TRUE if found otherwise FALSE
+ *
+ */
+BOOL KeybGetTransmitKey (
+    IN  PSKeyManagement pTable,
+    IN  PBYTE           pbyBSSID,
+    IN  DWORD           dwKeyType,
+    OUT PSKeyItem       *pKey
+    )
+{
+    int i, ii;
+
+    *pKey = NULL;
+    for (i=0;i<MAX_KEY_TABLE;i++) {
+        if ((pTable->KeyTable[i].bInUse == TRUE) &&
+            IS_ETH_ADDRESS_EQUAL(pTable->KeyTable[i].abyBSSID,pbyBSSID)) {
+
+            if (dwKeyType == PAIRWISE_KEY) {
+
+                if (pTable->KeyTable[i].PairwiseKey.bKeyValid == TRUE) {
+                    *pKey = &(pTable->KeyTable[i].PairwiseKey);
+
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"KeybGetTransmitKey:");
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"PAIRWISE_KEY: KeyTable.abyBSSID: ");
+                    for (ii = 0; ii < 6; ii++) {
+                        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"%x ", pTable->KeyTable[i].abyBSSID[ii]);
+                    }
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\n");
+
+
+                    return (TRUE);
+                }
+                else {
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"PairwiseKey.bKeyValid == FALSE\n");
+                    return (FALSE);
+                }
+            } // End of Type == PAIRWISE
+            else {
+                if (pTable->KeyTable[i].dwGTKeyIndex == 0) {
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ERROR: dwGTKeyIndex == 0 !!!\n");
+                    return FALSE;
+                }
+                if (pTable->KeyTable[i].GroupKey[(pTable->KeyTable[i].dwGTKeyIndex&0x000000FF)].bKeyValid == TRUE) {
+                    *pKey = &(pTable->KeyTable[i].GroupKey[(pTable->KeyTable[i].dwGTKeyIndex&0x000000FF)]);
+
+                        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"KeybGetTransmitKey:");
+                        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"GROUP_KEY: KeyTable.abyBSSID\n");
+                        for (ii = 0; ii < 6; ii++) {
+                            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"%x ", pTable->KeyTable[i].abyBSSID[ii]);
+                        }
+                        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\n");
+                        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"dwGTKeyIndex: %lX\n", pTable->KeyTable[i].dwGTKeyIndex);
+
+                    return (TRUE);
+                }
+                else {
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"GroupKey.bKeyValid == FALSE\n");
+                    return (FALSE);
+                }
+            } // End of Type = GROUP
+        } // BSSID match
+    }
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ERROR: NO Match BSSID !!! ");
+    for (ii = 0; ii < 6; ii++) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"%02x ", *(pbyBSSID+ii));
+    }
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\n");
+    return (FALSE);
+}
+
+
+/*
+ * Description: Check Pairewise Key
+ *
+ * Parameters:
+ *  In:
+ *      pTable          - Pointer to Key table
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if found otherwise FALSE
+ *
+ */
+BOOL KeybCheckPairewiseKey (
+    IN  PSKeyManagement pTable,
+    OUT PSKeyItem       *pKey
+    )
+{
+    int i;
+
+    *pKey = NULL;
+    for (i=0;i<MAX_KEY_TABLE;i++) {
+        if ((pTable->KeyTable[i].bInUse == TRUE) &&
+            (pTable->KeyTable[i].PairwiseKey.bKeyValid == TRUE)) {
+            *pKey = &(pTable->KeyTable[i].PairwiseKey);
+            return (TRUE);
+        }
+    }
+    return (FALSE);
+}
+
+/*
+ * Description: Set Key to table
+ *
+ * Parameters:
+ *  In:
+ *      pTable          - Pointer to Key table
+ *      dwKeyIndex      - Key index (reference to NDIS DDK)
+ *      uKeyLength      - Key length
+ *      KeyRSC          - Key RSC
+ *      pbyKey          - Pointer to key
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if success otherwise FALSE
+ *
+ */
+BOOL KeybSetDefaultKey (
+    PSKeyManagement pTable,
+    DWORD           dwKeyIndex,
+    ULONG           uKeyLength,
+    PQWORD          pKeyRSC,
+    PBYTE           pbyKey,
+    BYTE            byKeyDecMode,
+    DWORD_PTR       dwIoBase,
+    BYTE            byLocalID
+    )
+{
+    UINT        ii;
+    PSKeyItem   pKey;
+    UINT        uKeyIdx;
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Enter KeybSetDefaultKey: %1x, %d \n", (int)dwKeyIndex, (int)uKeyLength);
+
+
+    if ((dwKeyIndex & PAIRWISE_KEY) != 0) {                  // Pairwise key
+        return (FALSE);
+    } else if ((dwKeyIndex & 0x000000FF) >= MAX_GROUP_KEY) {
+        return (FALSE);
+    }
+
+    pTable->KeyTable[MAX_KEY_TABLE-1].bInUse = TRUE;
+    for(ii=0;ii<U_ETHER_ADDR_LEN;ii++)
+        pTable->KeyTable[MAX_KEY_TABLE-1].abyBSSID[ii] = 0xFF;
+
+    // Group key
+    pKey = &(pTable->KeyTable[MAX_KEY_TABLE-1].GroupKey[dwKeyIndex & 0x000000FF]);
+    if ((dwKeyIndex & TRANSMIT_KEY) != 0)  {
+        // Group transmit key
+        pTable->KeyTable[MAX_KEY_TABLE-1].dwGTKeyIndex = dwKeyIndex;
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Group transmit key(R)[%lX]: %d\n", pTable->KeyTable[MAX_KEY_TABLE-1].dwGTKeyIndex, MAX_KEY_TABLE-1);
+
+    }
+    pTable->KeyTable[MAX_KEY_TABLE-1].wKeyCtl &= 0x7F00;          // clear all key control filed
+    pTable->KeyTable[MAX_KEY_TABLE-1].wKeyCtl |= (byKeyDecMode << 4);
+    pTable->KeyTable[MAX_KEY_TABLE-1].wKeyCtl |= (byKeyDecMode);
+    pTable->KeyTable[MAX_KEY_TABLE-1].wKeyCtl |= 0x0044;          // use group key for all address
+    uKeyIdx = (dwKeyIndex & 0x000000FF);
+
+    if ((uKeyLength == WLAN_WEP232_KEYLEN) &&
+        (byKeyDecMode == KEY_CTL_WEP)) {
+        pTable->KeyTable[MAX_KEY_TABLE-1].wKeyCtl |= 0x4000;              // disable on-fly disable address match
+        pTable->KeyTable[MAX_KEY_TABLE-1].bSoftWEP = TRUE;
+    } else {
+        if (pTable->KeyTable[MAX_KEY_TABLE-1].bSoftWEP == FALSE)
+            pTable->KeyTable[MAX_KEY_TABLE-1].wKeyCtl |= 0xC000;          // enable on-fly disable address match
+    }
+
+    pKey->bKeyValid = TRUE;
+    pKey->uKeyLength = uKeyLength;
+    pKey->dwKeyIndex = dwKeyIndex;
+    pKey->byCipherSuite = byKeyDecMode;
+    MEMvCopy(pKey->abyKey, pbyKey, uKeyLength);
+    if (byKeyDecMode == KEY_CTL_WEP) {
+        if (uKeyLength == WLAN_WEP40_KEYLEN)
+            pKey->abyKey[15] &= 0x7F;
+        if (uKeyLength == WLAN_WEP104_KEYLEN)
+            pKey->abyKey[15] |= 0x80;
+    }
+    MACvSetKeyEntry(dwIoBase, pTable->KeyTable[MAX_KEY_TABLE-1].wKeyCtl, MAX_KEY_TABLE-1, uKeyIdx, pTable->KeyTable[MAX_KEY_TABLE-1].abyBSSID, (PDWORD)pKey->abyKey, byLocalID);
+
+    if ((dwKeyIndex & USE_KEYRSC) == 0) {
+        // RSC set by NIC
+        ZERO_MEMORY(&(pKey->KeyRSC), sizeof(QWORD));
+    } else {
+        MEMvCopy(&(pKey->KeyRSC), pKeyRSC,  sizeof(QWORD));
+    }
+    pKey->dwTSC47_16 = 0;
+    pKey->wTSC15_0 = 0;
+
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"KeybSetKey(R): \n");
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->bKeyValid: %d\n", pKey->bKeyValid);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->uKeyLength: %d\n", (int)pKey->uKeyLength);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->abyKey: \n");
+    for (ii = 0; ii < pKey->uKeyLength; ii++) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"%x", pKey->abyKey[ii]);
+    }
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\n");
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwTSC47_16: %lx\n", pKey->dwTSC47_16);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->wTSC15_0: %x\n", pKey->wTSC15_0);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwKeyIndex: %lx\n", pKey->dwKeyIndex);
+
+    return (TRUE);
+}
+
+
+/*
+ * Description: Set Key to table
+ *
+ * Parameters:
+ *  In:
+ *      pTable          - Pointer to Key table
+ *      dwKeyIndex      - Key index (reference to NDIS DDK)
+ *      uKeyLength      - Key length
+ *      KeyRSC          - Key RSC
+ *      pbyKey          - Pointer to key
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if success otherwise FALSE
+ *
+ */
+BOOL KeybSetAllGroupKey (
+    PSKeyManagement pTable,
+    DWORD           dwKeyIndex,
+    ULONG           uKeyLength,
+    PQWORD          pKeyRSC,
+    PBYTE           pbyKey,
+    BYTE            byKeyDecMode,
+    DWORD_PTR       dwIoBase,
+    BYTE            byLocalID
+    )
+{
+    int         i;
+    UINT        ii;
+    PSKeyItem   pKey;
+    UINT        uKeyIdx;
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Enter KeybSetAllGroupKey: %lX\n", dwKeyIndex);
+
+
+    if ((dwKeyIndex & PAIRWISE_KEY) != 0) {                  // Pairwise key
+        return (FALSE);
+    } else if ((dwKeyIndex & 0x000000FF) >= MAX_GROUP_KEY) {
+        return (FALSE);
+    }
+
+    for (i=0; i < MAX_KEY_TABLE-1; i++) {
+        if (pTable->KeyTable[i].bInUse == TRUE) {
+            // found table already exist
+            // Group key
+            pKey = &(pTable->KeyTable[i].GroupKey[dwKeyIndex & 0x000000FF]);
+            if ((dwKeyIndex & TRANSMIT_KEY) != 0)  {
+                // Group transmit key
+                pTable->KeyTable[i].dwGTKeyIndex = dwKeyIndex;
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Group transmit key(R)[%lX]: %d\n", pTable->KeyTable[i].dwGTKeyIndex, i);
+
+            }
+            pTable->KeyTable[i].wKeyCtl &= 0xFF0F;          // clear group key control filed
+            pTable->KeyTable[i].wKeyCtl |= (byKeyDecMode << 4);
+            pTable->KeyTable[i].wKeyCtl |= 0x0040;          // use group key for group address
+            uKeyIdx = (dwKeyIndex & 0x000000FF);
+
+            pTable->KeyTable[i].wKeyCtl |= 0x8000;              // enable on-fly
+
+            pKey->bKeyValid = TRUE;
+            pKey->uKeyLength = uKeyLength;
+            pKey->dwKeyIndex = dwKeyIndex;
+            pKey->byCipherSuite = byKeyDecMode;
+            MEMvCopy(pKey->abyKey, pbyKey, uKeyLength);
+            if (byKeyDecMode == KEY_CTL_WEP) {
+                if (uKeyLength == WLAN_WEP40_KEYLEN)
+                    pKey->abyKey[15] &= 0x7F;
+                if (uKeyLength == WLAN_WEP104_KEYLEN)
+                    pKey->abyKey[15] |= 0x80;
+            }
+            MACvSetKeyEntry(dwIoBase, pTable->KeyTable[i].wKeyCtl, i, uKeyIdx, pTable->KeyTable[i].abyBSSID, (PDWORD)pKey->abyKey, byLocalID);
+
+            if ((dwKeyIndex & USE_KEYRSC) == 0) {
+                // RSC set by NIC
+                ZERO_MEMORY(&(pKey->KeyRSC), sizeof(QWORD));
+            }
+            else {
+                MEMvCopy(&(pKey->KeyRSC), pKeyRSC,  sizeof(QWORD));
+            }
+            pKey->dwTSC47_16 = 0;
+            pKey->wTSC15_0 = 0;
+
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"KeybSetKey(R): \n");
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->bKeyValid: %d\n ", pKey->bKeyValid);
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->uKeyLength: %d\n ", (int)pKey->uKeyLength);
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->abyKey: ");
+            for (ii = 0; ii < pKey->uKeyLength; ii++) {
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"%02x ", pKey->abyKey[ii]);
+            }
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\n");
+
+            //DBG_PRN_GRP12(("pKey->dwTSC47_16: %lX\n ", pKey->dwTSC47_16));
+            //DBG_PRN_GRP12(("pKey->wTSC15_0: %X\n ", pKey->wTSC15_0));
+            //DBG_PRN_GRP12(("pKey->dwKeyIndex: %lX\n ", pKey->dwKeyIndex));
+
+        } // (pTable->KeyTable[i].bInUse == TRUE)
+    }
+    return (TRUE);
+}
diff --git a/drivers/staging/vt6655/key.h b/drivers/staging/vt6655/key.h
new file mode 100644
index 00000000000..9c7d335ea08
--- /dev/null
+++ b/drivers/staging/vt6655/key.h
@@ -0,0 +1,202 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: key.h
+ *
+ * Purpose: Implement functions for 802.11i Key management
+ *
+ * Author: Jerry Chen
+ *
+ * Date: May 29, 2003
+ *
+ */
+
+
+#ifndef __KEY_H__
+#define __KEY_H__
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+
+#if !defined(__TETHER_H__)
+#include "tether.h"
+#endif
+
+#if !defined(__80211MGR_H__)
+#include "80211mgr.h"
+#endif
+
+/*---------------------  Export Definitions -------------------------*/
+#define MAX_GROUP_KEY       4
+#define MAX_KEY_TABLE       11
+#define MAX_KEY_LEN         32
+#define AES_KEY_LEN         16
+
+
+#define AUTHENTICATOR_KEY   0x10000000
+#define USE_KEYRSC          0x20000000
+#define PAIRWISE_KEY        0x40000000
+#define TRANSMIT_KEY        0x80000000
+
+#define GROUP_KEY           0x00000000
+
+#define KEY_CTL_WEP         0x00
+#define KEY_CTL_NONE        0x01
+#define KEY_CTL_TKIP        0x02
+#define KEY_CTL_CCMP        0x03
+#define KEY_CTL_INVALID     0xFF
+
+
+typedef struct tagSKeyItem
+{
+    BOOL        bKeyValid;
+    ULONG       uKeyLength;
+    BYTE        abyKey[MAX_KEY_LEN];
+    QWORD       KeyRSC;
+    DWORD       dwTSC47_16;
+    WORD        wTSC15_0;
+    BYTE        byCipherSuite;
+    BYTE        byReserved0;
+    DWORD       dwKeyIndex;
+    PVOID       pvKeyTable;
+} SKeyItem, DEF* PSKeyItem; //64
+
+typedef struct tagSKeyTable
+{
+    BYTE        abyBSSID[U_ETHER_ADDR_LEN];  //6
+    BYTE        byReserved0[2];              //8
+    SKeyItem    PairwiseKey;
+    SKeyItem    GroupKey[MAX_GROUP_KEY]; //64*5 = 320, 320+8=328
+    DWORD       dwGTKeyIndex;            // GroupTransmitKey Index
+    BOOL        bInUse;
+    //2006-1116-01,<Modify> by NomadZhao
+    //WORD      wKeyCtl;
+    //BOOL      bSoftWEP;
+    BOOL        bSoftWEP;
+    WORD        wKeyCtl;      // for address of wKeyCtl at align 4
+
+    BYTE        byReserved1[6];
+} SKeyTable, DEF* PSKeyTable; //348
+
+typedef struct tagSKeyManagement
+{
+    SKeyTable   KeyTable[MAX_KEY_TABLE];
+} SKeyManagement, DEF* PSKeyManagement;
+
+/*---------------------  Export Types  ------------------------------*/
+
+/*---------------------  Export Macros ------------------------------*/
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+#ifdef __cplusplus
+extern "C" {                            /* Assume C declarations for C++ */
+#endif /* __cplusplus */
+
+VOID KeyvInitTable(PSKeyManagement pTable, DWORD_PTR dwIoBase);
+
+BOOL KeybGetKey(
+    IN  PSKeyManagement pTable,
+    IN  PBYTE           pbyBSSID,
+    IN  DWORD           dwKeyIndex,
+    OUT PSKeyItem       *pKey
+    );
+
+BOOL KeybSetKey(
+    PSKeyManagement pTable,
+    PBYTE           pbyBSSID,
+    DWORD           dwKeyIndex,
+    ULONG           uKeyLength,
+    PQWORD          pKeyRSC,
+    PBYTE           pbyKey,
+    BYTE            byKeyDecMode,
+    DWORD_PTR       dwIoBase,
+    BYTE            byLocalID
+    );
+
+BOOL KeybSetDefaultKey(
+    PSKeyManagement pTable,
+    DWORD           dwKeyIndex,
+    ULONG           uKeyLength,
+    PQWORD          pKeyRSC,
+    PBYTE           pbyKey,
+    BYTE            byKeyDecMode,
+    DWORD_PTR       dwIoBase,
+    BYTE            byLocalID
+    );
+
+BOOL KeybRemoveKey(
+    PSKeyManagement pTable,
+    PBYTE           pbyBSSID,
+    DWORD           dwKeyIndex,
+    DWORD_PTR       dwIoBase
+    );
+
+BOOL KeybGetTransmitKey(
+    IN  PSKeyManagement pTable,
+    IN  PBYTE           pbyBSSID,
+    IN  DWORD           dwKeyType,
+    OUT PSKeyItem       *pKey
+    );
+
+BOOL KeybCheckPairewiseKey(
+    IN  PSKeyManagement pTable,
+    OUT PSKeyItem       *pKey
+    );
+
+BOOL KeybRemoveAllKey(
+    PSKeyManagement pTable,
+    PBYTE           pbyBSSID,
+    DWORD_PTR       dwIoBase
+    );
+
+VOID KeyvRemoveWEPKey(
+    PSKeyManagement pTable,
+    DWORD           dwKeyIndex,
+    DWORD_PTR       dwIoBase
+    );
+
+VOID KeyvRemoveAllWEPKey(
+    PSKeyManagement pTable,
+    DWORD_PTR       dwIoBase
+    );
+
+BOOL KeybSetAllGroupKey (
+    PSKeyManagement pTable,
+    DWORD           dwKeyIndex,
+    ULONG           uKeyLength,
+    PQWORD          pKeyRSC,
+    PBYTE           pbyKey,
+    BYTE            byKeyDecMode,
+    DWORD_PTR       dwIoBase,
+    BYTE            byLocalID
+    );
+
+#ifdef __cplusplus
+}                                       /* End of extern "C" { */
+
+#endif /* __cplusplus */
+
+
+#endif // __KEY_H__
+
diff --git a/drivers/staging/vt6655/mac.c b/drivers/staging/vt6655/mac.c
new file mode 100644
index 00000000000..0283ed3bedd
--- /dev/null
+++ b/drivers/staging/vt6655/mac.c
@@ -0,0 +1,1752 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: mac.c
+ *
+ * Purpose:  MAC routines
+ *
+ * Author: Tevin Chen
+ *
+ * Date: May 21, 1996
+ *
+ * Functions:
+ *      MACvReadAllRegs - Read All MAC Registers to buffer
+ *      MACbIsRegBitsOn - Test if All test Bits On
+ *      MACbIsRegBitsOff - Test if All test Bits Off
+ *      MACbIsIntDisable - Test if MAC interrupt disable
+ *      MACbyReadMultiAddr - Read Multicast Address Mask Pattern
+ *      MACvWriteMultiAddr - Write Multicast Address Mask Pattern
+ *      MACvSetMultiAddrByHash - Set Multicast Address Mask by Hash value
+ *      MACvResetMultiAddrByHash - Clear Multicast Address Mask by Hash value
+ *      MACvSetRxThreshold - Set Rx Threshold value
+ *      MACvGetRxThreshold - Get Rx Threshold value
+ *      MACvSetTxThreshold - Set Tx Threshold value
+ *      MACvGetTxThreshold - Get Tx Threshold value
+ *      MACvSetDmaLength - Set Dma Length value
+ *      MACvGetDmaLength - Get Dma Length value
+ *      MACvSetShortRetryLimit - Set 802.11 Short Retry limit
+ *      MACvGetShortRetryLimit - Get 802.11 Short Retry limit
+ *      MACvSetLongRetryLimit - Set 802.11 Long Retry limit
+ *      MACvGetLongRetryLimit - Get 802.11 Long Retry limit
+ *      MACvSetLoopbackMode - Set MAC Loopback Mode
+ *      MACbIsInLoopbackMode - Test if MAC in Loopback mode
+ *      MACvSetPacketFilter - Set MAC Address Filter
+ *      MACvSaveContext - Save Context of MAC Registers
+ *      MACvRestoreContext - Restore Context of MAC Registers
+ *      MACbCompareContext - Compare if values of MAC Registers same as Context
+ *      MACbSoftwareReset - Software Reset MAC
+ *      MACbSafeRxOff - Turn Off MAC Rx
+ *      MACbSafeTxOff - Turn Off MAC Tx
+ *      MACbSafeStop - Stop MAC function
+ *      MACbShutdown - Shut down MAC
+ *      MACvInitialize - Initialize MAC
+ *      MACvSetCurrRxDescAddr - Set Rx Descriptos Address
+ *      MACvSetCurrTx0DescAddr - Set Tx0 Descriptos Address
+ *      MACvSetCurrTx1DescAddr - Set Tx1 Descriptos Address
+ *      MACvTimer0MicroSDelay - Micro Second Delay Loop by MAC
+ *
+ * Revision History:
+ *      08-22-2003 Kyle Hsu     :  Porting MAC functions from sim53
+ *      09-03-2003 Bryan YC Fan :  Add MACvClearBusSusInd()& MACvEnableBusSusEn()
+ *      09-18-2003 Jerry Chen   :  Add MACvSetKeyEntry & MACvDisableKeyEntry
+ *
+ */
+
+#if !defined(__TMACRO_H__)
+#include "tmacro.h"
+#endif
+#if !defined(__TBIT_H__)
+#include "tbit.h"
+#endif
+#if !defined(__TETHER_H__)
+#include "tether.h"
+#endif
+#if !defined(__MAC_H__)
+#include "mac.h"
+#endif
+
+
+WORD TxRate_iwconfig;//2008-5-8 <add> by chester
+/*---------------------  Static Definitions -------------------------*/
+//static int          msglevel                =MSG_LEVEL_DEBUG;
+static int          msglevel                =MSG_LEVEL_INFO;
+/*---------------------  Static Classes  ----------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+
+/*---------------------  Static Functions  --------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+
+/*
+ * Description:
+ *      Read All MAC Registers to buffer
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - Base Address for MAC
+ *  Out:
+ *      pbyMacRegs  - buffer to read
+ *
+ * Return Value: none
+ *
+ */
+VOID MACvReadAllRegs (DWORD_PTR dwIoBase, PBYTE pbyMacRegs)
+{
+    int ii;
+
+    // read page0 register
+    for (ii = 0; ii < MAC_MAX_CONTEXT_SIZE_PAGE0; ii++) {
+        VNSvInPortB(dwIoBase + ii, pbyMacRegs);
+        pbyMacRegs++;
+    }
+
+    MACvSelectPage1(dwIoBase);
+
+    // read page1 register
+    for (ii = 0; ii < MAC_MAX_CONTEXT_SIZE_PAGE1; ii++) {
+        VNSvInPortB(dwIoBase + ii, pbyMacRegs);
+        pbyMacRegs++;
+    }
+
+    MACvSelectPage0(dwIoBase);
+
+}
+
+/*
+ * Description:
+ *      Test if all test bits on
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - Base Address for MAC
+ *      byRegOfs    - Offset of MAC Register
+ *      byTestBits  - Test bits
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if all test bits On; otherwise FALSE
+ *
+ */
+BOOL MACbIsRegBitsOn (DWORD_PTR dwIoBase, BYTE byRegOfs, BYTE byTestBits)
+{
+    BYTE byData;
+
+    VNSvInPortB(dwIoBase + byRegOfs, &byData);
+    return BITbIsAllBitsOn(byData, byTestBits);
+}
+
+/*
+ * Description:
+ *      Test if all test bits off
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - Base Address for MAC
+ *      byRegOfs    - Offset of MAC Register
+ *      byTestBits  - Test bits
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if all test bits Off; otherwise FALSE
+ *
+ */
+BOOL MACbIsRegBitsOff (DWORD_PTR dwIoBase, BYTE byRegOfs, BYTE byTestBits)
+{
+    BYTE byData;
+
+    VNSvInPortB(dwIoBase + byRegOfs, &byData);
+    return BITbIsAllBitsOff(byData, byTestBits);
+}
+
+/*
+ * Description:
+ *      Test if MAC interrupt disable
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - Base Address for MAC
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if interrupt is disable; otherwise FALSE
+ *
+ */
+BOOL MACbIsIntDisable (DWORD_PTR dwIoBase)
+{
+    DWORD dwData;
+
+    VNSvInPortD(dwIoBase + MAC_REG_IMR, &dwData);
+    if (dwData != 0)
+        return FALSE;
+
+    return TRUE;
+}
+
+/*
+ * Description:
+ *      Read MAC Multicast Address Mask
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - Base Address for MAC
+ *      uByteidx    - Index of Mask
+ *  Out:
+ *      none
+ *
+ * Return Value: Mask Value read
+ *
+ */
+BYTE MACbyReadMultiAddr (DWORD_PTR dwIoBase, UINT uByteIdx)
+{
+    BYTE byData;
+
+    MACvSelectPage1(dwIoBase);
+    VNSvInPortB(dwIoBase + MAC_REG_MAR0 + uByteIdx, &byData);
+    MACvSelectPage0(dwIoBase);
+    return byData;
+}
+
+/*
+ * Description:
+ *      Write MAC Multicast Address Mask
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - Base Address for MAC
+ *      uByteidx    - Index of Mask
+ *      byData      - Mask Value to write
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+VOID MACvWriteMultiAddr (DWORD_PTR dwIoBase, UINT uByteIdx, BYTE byData)
+{
+    MACvSelectPage1(dwIoBase);
+    VNSvOutPortB(dwIoBase + MAC_REG_MAR0 + uByteIdx, byData);
+    MACvSelectPage0(dwIoBase);
+}
+
+/*
+ * Description:
+ *      Set this hash index into multicast address register bit
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - Base Address for MAC
+ *      byHashIdx   - Hash index to set
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void MACvSetMultiAddrByHash (DWORD_PTR dwIoBase, BYTE byHashIdx)
+{
+    UINT uByteIdx;
+    BYTE byBitMask;
+    BYTE byOrgValue;
+
+    // calculate byte position
+    uByteIdx = byHashIdx / 8;
+    ASSERT(uByteIdx < 8);
+    // calculate bit position
+    byBitMask = 1;
+    byBitMask <<= (byHashIdx % 8);
+    // turn on the bit
+    byOrgValue = MACbyReadMultiAddr(dwIoBase, uByteIdx);
+    MACvWriteMultiAddr(dwIoBase, uByteIdx, (BYTE)(byOrgValue | byBitMask));
+}
+
+/*
+ * Description:
+ *      Reset this hash index into multicast address register bit
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - Base Address for MAC
+ *      byHashIdx   - Hash index to clear
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void MACvResetMultiAddrByHash (DWORD_PTR dwIoBase, BYTE byHashIdx)
+{
+    UINT uByteIdx;
+    BYTE byBitMask;
+    BYTE byOrgValue;
+
+    // calculate byte position
+    uByteIdx = byHashIdx / 8;
+    ASSERT(uByteIdx < 8);
+    // calculate bit position
+    byBitMask = 1;
+    byBitMask <<= (byHashIdx % 8);
+    // turn off the bit
+    byOrgValue = MACbyReadMultiAddr(dwIoBase, uByteIdx);
+    MACvWriteMultiAddr(dwIoBase, uByteIdx, (BYTE)(byOrgValue & (~byBitMask)));
+}
+
+/*
+ * Description:
+ *      Set Rx Threshold
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - Base Address for MAC
+ *      byThreshold - Threshold Value
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void MACvSetRxThreshold (DWORD_PTR dwIoBase, BYTE byThreshold)
+{
+    BYTE byOrgValue;
+
+    ASSERT(byThreshold < 4);
+
+    // set FCR0
+    VNSvInPortB(dwIoBase + MAC_REG_FCR0, &byOrgValue);
+    byOrgValue = (byOrgValue & 0xCF) | (byThreshold << 4);
+    VNSvOutPortB(dwIoBase + MAC_REG_FCR0, byOrgValue);
+}
+
+/*
+ * Description:
+ *      Get Rx Threshold
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - Base Address for MAC
+ *  Out:
+ *      pbyThreshold- Threshold Value Get
+ *
+ * Return Value: none
+ *
+ */
+void MACvGetRxThreshold (DWORD_PTR dwIoBase, PBYTE pbyThreshold)
+{
+    // get FCR0
+    VNSvInPortB(dwIoBase + MAC_REG_FCR0, pbyThreshold);
+    *pbyThreshold = (*pbyThreshold >> 4) & 0x03;
+}
+
+/*
+ * Description:
+ *      Set Tx Threshold
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - Base Address for MAC
+ *      byThreshold - Threshold Value
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void MACvSetTxThreshold (DWORD_PTR dwIoBase, BYTE byThreshold)
+{
+    BYTE byOrgValue;
+
+    ASSERT(byThreshold < 4);
+
+    // set FCR0
+    VNSvInPortB(dwIoBase + MAC_REG_FCR0, &byOrgValue);
+    byOrgValue = (byOrgValue & 0xF3) | (byThreshold << 2);
+    VNSvOutPortB(dwIoBase + MAC_REG_FCR0, byOrgValue);
+}
+
+/*
+ * Description:
+ *      Get Tx Threshold
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - Base Address for MAC
+ *  Out:
+ *      pbyThreshold- Threshold Value Get
+ *
+ * Return Value: none
+ *
+ */
+void MACvGetTxThreshold (DWORD_PTR dwIoBase, PBYTE pbyThreshold)
+{
+    // get FCR0
+    VNSvInPortB(dwIoBase + MAC_REG_FCR0, pbyThreshold);
+    *pbyThreshold = (*pbyThreshold >> 2) & 0x03;
+}
+
+/*
+ * Description:
+ *      Set Dma Length
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - Base Address for MAC
+ *      byDmaLength - Dma Length Value
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void MACvSetDmaLength (DWORD_PTR dwIoBase, BYTE byDmaLength)
+{
+    BYTE byOrgValue;
+
+    ASSERT(byDmaLength < 4);
+
+    // set FCR0
+    VNSvInPortB(dwIoBase + MAC_REG_FCR0, &byOrgValue);
+    byOrgValue = (byOrgValue & 0xFC) | byDmaLength;
+    VNSvOutPortB(dwIoBase + MAC_REG_FCR0, byOrgValue);
+}
+
+/*
+ * Description:
+ *      Get Dma Length
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - Base Address for MAC
+ *  Out:
+ *      pbyDmaLength- Dma Length Value Get
+ *
+ * Return Value: none
+ *
+ */
+void MACvGetDmaLength (DWORD_PTR dwIoBase, PBYTE pbyDmaLength)
+{
+    // get FCR0
+    VNSvInPortB(dwIoBase + MAC_REG_FCR0, pbyDmaLength);
+    *pbyDmaLength &= 0x03;
+}
+
+/*
+ * Description:
+ *      Set 802.11 Short Retry Limit
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - Base Address for MAC
+ *      byRetryLimit- Retry Limit
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void MACvSetShortRetryLimit (DWORD_PTR dwIoBase, BYTE byRetryLimit)
+{
+    // set SRT
+    VNSvOutPortB(dwIoBase + MAC_REG_SRT, byRetryLimit);
+}
+
+/*
+ * Description:
+ *      Get 802.11 Short Retry Limit
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase        - Base Address for MAC
+ *  Out:
+ *      pbyRetryLimit   - Retry Limit Get
+ *
+ * Return Value: none
+ *
+ */
+void MACvGetShortRetryLimit (DWORD_PTR dwIoBase, PBYTE pbyRetryLimit)
+{
+    // get SRT
+    VNSvInPortB(dwIoBase + MAC_REG_SRT, pbyRetryLimit);
+}
+
+/*
+ * Description:
+ *      Set 802.11 Long Retry Limit
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - Base Address for MAC
+ *      byRetryLimit- Retry Limit
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void MACvSetLongRetryLimit (DWORD_PTR dwIoBase, BYTE byRetryLimit)
+{
+    // set LRT
+    VNSvOutPortB(dwIoBase + MAC_REG_LRT, byRetryLimit);
+}
+
+/*
+ * Description:
+ *      Get 802.11 Long Retry Limit
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase        - Base Address for MAC
+ *  Out:
+ *      pbyRetryLimit   - Retry Limit Get
+ *
+ * Return Value: none
+ *
+ */
+void MACvGetLongRetryLimit (DWORD_PTR dwIoBase, PBYTE pbyRetryLimit)
+{
+    // get LRT
+    VNSvInPortB(dwIoBase + MAC_REG_LRT, pbyRetryLimit);
+}
+
+/*
+ * Description:
+ *      Set MAC Loopback mode
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase        - Base Address for MAC
+ *      byLoopbackMode  - Loopback Mode
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void MACvSetLoopbackMode (DWORD_PTR dwIoBase, BYTE byLoopbackMode)
+{
+    BYTE byOrgValue;
+
+    ASSERT(byLoopbackMode < 3);
+    byLoopbackMode <<= 6;
+    // set TCR
+    VNSvInPortB(dwIoBase + MAC_REG_TEST, &byOrgValue);
+    byOrgValue = byOrgValue & 0x3F;
+    byOrgValue = byOrgValue | byLoopbackMode;
+    VNSvOutPortB(dwIoBase + MAC_REG_TEST, byOrgValue);
+}
+
+/*
+ * Description:
+ *      Test if MAC in Loopback mode
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase        - Base Address for MAC
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if in Loopback mode; otherwise FALSE
+ *
+ */
+BOOL MACbIsInLoopbackMode (DWORD_PTR dwIoBase)
+{
+    BYTE byOrgValue;
+
+    VNSvInPortB(dwIoBase + MAC_REG_TEST, &byOrgValue);
+    if (BITbIsAnyBitsOn(byOrgValue, (TEST_LBINT | TEST_LBEXT)))
+        return TRUE;
+    return FALSE;
+}
+
+/*
+ * Description:
+ *      Set MAC Address filter
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase        - Base Address for MAC
+ *      wFilterType     - Filter Type
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void MACvSetPacketFilter (DWORD_PTR dwIoBase, WORD wFilterType)
+{
+    BYTE    byOldRCR;
+    BYTE    byNewRCR = 0;
+
+    // if only in DIRECTED mode, multicast-address will set to zero,
+    // but if other mode exist (e.g. PROMISCUOUS), multicast-address
+    // will be open
+    if (BITbIsBitOn(wFilterType, PKT_TYPE_DIRECTED)) {
+        // set multicast address to accept none
+        MACvSelectPage1(dwIoBase);
+        VNSvOutPortD(dwIoBase + MAC_REG_MAR0, 0L);
+        VNSvOutPortD(dwIoBase + MAC_REG_MAR0 + sizeof(DWORD), 0L);
+        MACvSelectPage0(dwIoBase);
+    }
+
+    if (BITbIsAnyBitsOn(wFilterType, PKT_TYPE_PROMISCUOUS | PKT_TYPE_ALL_MULTICAST)) {
+        // set multicast address to accept all
+        MACvSelectPage1(dwIoBase);
+        VNSvOutPortD(dwIoBase + MAC_REG_MAR0, 0xFFFFFFFFL);
+        VNSvOutPortD(dwIoBase + MAC_REG_MAR0 + sizeof(DWORD), 0xFFFFFFFFL);
+        MACvSelectPage0(dwIoBase);
+    }
+
+    if (BITbIsBitOn(wFilterType, PKT_TYPE_PROMISCUOUS)) {
+
+        byNewRCR |= (RCR_RXALLTYPE | RCR_UNICAST | RCR_MULTICAST | RCR_BROADCAST);
+
+        byNewRCR &= ~RCR_BSSID;
+    }
+
+    if (BITbIsAnyBitsOn(wFilterType, (PKT_TYPE_ALL_MULTICAST | PKT_TYPE_MULTICAST)))
+        byNewRCR |= RCR_MULTICAST;
+
+    if (BITbIsBitOn(wFilterType, PKT_TYPE_BROADCAST))
+        byNewRCR |= RCR_BROADCAST;
+
+    if (BITbIsBitOn(wFilterType, PKT_TYPE_ERROR_CRC))
+        byNewRCR |= RCR_ERRCRC;
+
+    VNSvInPortB(dwIoBase + MAC_REG_RCR,  &byOldRCR);
+    if (byNewRCR != byOldRCR) {
+        // Modify the Receive Command Register
+        VNSvOutPortB(dwIoBase + MAC_REG_RCR, byNewRCR);
+    }
+}
+
+/*
+ * Description:
+ *      Save MAC registers to context buffer
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - Base Address for MAC
+ *  Out:
+ *      pbyCxtBuf   - Context buffer
+ *
+ * Return Value: none
+ *
+ */
+void MACvSaveContext (DWORD_PTR dwIoBase, PBYTE pbyCxtBuf)
+{
+    int         ii;
+
+    // read page0 register
+    for (ii = 0; ii < MAC_MAX_CONTEXT_SIZE_PAGE0; ii++) {
+        VNSvInPortB((dwIoBase + ii), (pbyCxtBuf + ii));
+    }
+
+    MACvSelectPage1(dwIoBase);
+
+    // read page1 register
+    for (ii = 0; ii < MAC_MAX_CONTEXT_SIZE_PAGE1; ii++) {
+        VNSvInPortB((dwIoBase + ii), (pbyCxtBuf + MAC_MAX_CONTEXT_SIZE_PAGE0 + ii));
+    }
+
+    MACvSelectPage0(dwIoBase);
+}
+
+/*
+ * Description:
+ *      Restore MAC registers from context buffer
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - Base Address for MAC
+ *      pbyCxtBuf   - Context buffer
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+VOID MACvRestoreContext (DWORD_PTR dwIoBase, PBYTE pbyCxtBuf)
+{
+    int         ii;
+
+    MACvSelectPage1(dwIoBase);
+    // restore page1
+    for (ii = 0; ii < MAC_MAX_CONTEXT_SIZE_PAGE1; ii++) {
+        VNSvOutPortB((dwIoBase + ii), *(pbyCxtBuf + MAC_MAX_CONTEXT_SIZE_PAGE0 + ii));
+    }
+    MACvSelectPage0(dwIoBase);
+
+    // restore RCR,TCR,IMR...
+    for (ii = MAC_REG_RCR; ii < MAC_REG_ISR; ii++) {
+        VNSvOutPortB(dwIoBase + ii, *(pbyCxtBuf + ii));
+    }
+    // restore MAC Config.
+    for (ii = MAC_REG_LRT; ii < MAC_REG_PAGE1SEL; ii++) {
+        VNSvOutPortB(dwIoBase + ii, *(pbyCxtBuf + ii));
+    }
+    VNSvOutPortB(dwIoBase + MAC_REG_CFG, *(pbyCxtBuf + MAC_REG_CFG));
+
+    // restore PS Config.
+    for (ii = MAC_REG_PSCFG; ii < MAC_REG_BBREGCTL; ii++) {
+        VNSvOutPortB(dwIoBase + ii, *(pbyCxtBuf + ii));
+    }
+
+    // restore CURR_RX_DESC_ADDR, CURR_TX_DESC_ADDR
+    VNSvOutPortD(dwIoBase + MAC_REG_TXDMAPTR0, *(PDWORD)(pbyCxtBuf + MAC_REG_TXDMAPTR0));
+    VNSvOutPortD(dwIoBase + MAC_REG_AC0DMAPTR, *(PDWORD)(pbyCxtBuf + MAC_REG_AC0DMAPTR));
+    VNSvOutPortD(dwIoBase + MAC_REG_BCNDMAPTR, *(PDWORD)(pbyCxtBuf + MAC_REG_BCNDMAPTR));
+
+
+    VNSvOutPortD(dwIoBase + MAC_REG_RXDMAPTR0, *(PDWORD)(pbyCxtBuf + MAC_REG_RXDMAPTR0));
+
+    VNSvOutPortD(dwIoBase + MAC_REG_RXDMAPTR1, *(PDWORD)(pbyCxtBuf + MAC_REG_RXDMAPTR1));
+
+}
+
+/*
+ * Description:
+ *      Compare if MAC registers same as context buffer
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - Base Address for MAC
+ *      pbyCxtBuf   - Context buffer
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if all values are the same; otherwise FALSE
+ *
+ */
+BOOL MACbCompareContext (DWORD_PTR dwIoBase, PBYTE pbyCxtBuf)
+{
+    DWORD       dwData;
+
+    // compare MAC context to determine if this is a power lost init,
+    // return TRUE for power remaining init, return FALSE for power lost init
+
+    // compare CURR_RX_DESC_ADDR, CURR_TX_DESC_ADDR
+    VNSvInPortD(dwIoBase + MAC_REG_TXDMAPTR0, &dwData);
+    if (dwData != *(PDWORD)(pbyCxtBuf + MAC_REG_TXDMAPTR0)) {
+        return FALSE;
+    }
+
+    VNSvInPortD(dwIoBase + MAC_REG_AC0DMAPTR, &dwData);
+    if (dwData != *(PDWORD)(pbyCxtBuf + MAC_REG_AC0DMAPTR)) {
+        return FALSE;
+    }
+
+    VNSvInPortD(dwIoBase + MAC_REG_RXDMAPTR0, &dwData);
+    if (dwData != *(PDWORD)(pbyCxtBuf + MAC_REG_RXDMAPTR0)) {
+        return FALSE;
+    }
+
+    VNSvInPortD(dwIoBase + MAC_REG_RXDMAPTR1, &dwData);
+    if (dwData != *(PDWORD)(pbyCxtBuf + MAC_REG_RXDMAPTR1)) {
+        return FALSE;
+    }
+
+
+    return TRUE;
+}
+
+/*
+ * Description:
+ *      Software Reset MAC
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - Base Address for MAC
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if Reset Success; otherwise FALSE
+ *
+ */
+BOOL MACbSoftwareReset (DWORD_PTR dwIoBase)
+{
+    BYTE    byData;
+    WORD    ww;
+
+    // turn on HOSTCR_SOFTRST, just write 0x01 to reset
+    //MACvRegBitsOn(dwIoBase, MAC_REG_HOSTCR, HOSTCR_SOFTRST);
+    VNSvOutPortB(dwIoBase+ MAC_REG_HOSTCR, 0x01);
+
+    for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+        VNSvInPortB(dwIoBase + MAC_REG_HOSTCR, &byData);
+        if (BITbIsBitOff(byData, HOSTCR_SOFTRST))
+            break;
+    }
+    if (ww == W_MAX_TIMEOUT)
+        return FALSE;
+    return TRUE;
+
+}
+
+/*
+ * Description:
+ *      save some important register's value, then do reset, then restore register's value
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - Base Address for MAC
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if success; otherwise FALSE
+ *
+ */
+BOOL MACbSafeSoftwareReset (DWORD_PTR dwIoBase)
+{
+    BYTE    abyTmpRegData[MAC_MAX_CONTEXT_SIZE_PAGE0+MAC_MAX_CONTEXT_SIZE_PAGE1];
+    BOOL    bRetVal;
+
+    // PATCH....
+    // save some important register's value, then do
+    // reset, then restore register's value
+
+    // save MAC context
+    MACvSaveContext(dwIoBase, abyTmpRegData);
+    // do reset
+    bRetVal = MACbSoftwareReset(dwIoBase);
+    //BBvSoftwareReset(pDevice->PortOffset);
+    // restore MAC context, except CR0
+    MACvRestoreContext(dwIoBase, abyTmpRegData);
+
+    return bRetVal;
+}
+
+/*
+ * Description:
+ *      Trun Off MAC Rx
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - Base Address for MAC
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if success; otherwise FALSE
+ *
+ */
+BOOL MACbSafeRxOff (DWORD_PTR dwIoBase)
+{
+    WORD    ww;
+    DWORD   dwData;
+    BYTE    byData;
+
+    // turn off wow temp for turn off Rx safely
+
+    // Clear RX DMA0,1
+    VNSvOutPortD(dwIoBase + MAC_REG_RXDMACTL0, DMACTL_CLRRUN);
+    VNSvOutPortD(dwIoBase + MAC_REG_RXDMACTL1, DMACTL_CLRRUN);
+    for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+        VNSvInPortD(dwIoBase + MAC_REG_RXDMACTL0, &dwData);
+        if (BITbIsAllBitsOff(dwData, DMACTL_RUN))
+            break;
+    }
+    if (ww == W_MAX_TIMEOUT) {
+        DBG_PORT80(0x10);
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" DBG_PORT80(0x10)\n");
+        return(FALSE);
+    }
+    for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+        VNSvInPortD(dwIoBase + MAC_REG_RXDMACTL1, &dwData);
+        if (BITbIsAllBitsOff(dwData, DMACTL_RUN))
+            break;
+    }
+    if (ww == W_MAX_TIMEOUT) {
+        DBG_PORT80(0x11);
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" DBG_PORT80(0x11)\n");
+        return(FALSE);
+    }
+
+    // try to safe shutdown RX
+    MACvRegBitsOff(dwIoBase, MAC_REG_HOSTCR, HOSTCR_RXON);
+    // W_MAX_TIMEOUT is the timeout period
+    for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+        VNSvInPortB(dwIoBase + MAC_REG_HOSTCR, &byData);
+        if (BITbIsAllBitsOff(byData, HOSTCR_RXONST))
+            break;
+    }
+    if (ww == W_MAX_TIMEOUT) {
+        DBG_PORT80(0x12);
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" DBG_PORT80(0x12)\n");
+        return(FALSE);
+    }
+    return TRUE;
+}
+
+/*
+ * Description:
+ *      Trun Off MAC Tx
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - Base Address for MAC
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if success; otherwise FALSE
+ *
+ */
+BOOL MACbSafeTxOff (DWORD_PTR dwIoBase)
+{
+    WORD    ww;
+    DWORD   dwData;
+    BYTE    byData;
+
+    // Clear TX DMA
+    //Tx0
+    VNSvOutPortD(dwIoBase + MAC_REG_TXDMACTL0, DMACTL_CLRRUN);
+    //AC0
+    VNSvOutPortD(dwIoBase + MAC_REG_AC0DMACTL, DMACTL_CLRRUN);
+
+
+    for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+        VNSvInPortD(dwIoBase + MAC_REG_TXDMACTL0, &dwData);
+        if (BITbIsAllBitsOff(dwData, DMACTL_RUN))
+            break;
+    }
+    if (ww == W_MAX_TIMEOUT) {
+        DBG_PORT80(0x20);
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" DBG_PORT80(0x20)\n");
+        return(FALSE);
+    }
+    for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+        VNSvInPortD(dwIoBase + MAC_REG_AC0DMACTL, &dwData);
+        if (BITbIsAllBitsOff(dwData, DMACTL_RUN))
+            break;
+    }
+    if (ww == W_MAX_TIMEOUT) {
+        DBG_PORT80(0x21);
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" DBG_PORT80(0x21)\n");
+        return(FALSE);
+    }
+
+    // try to safe shutdown TX
+    MACvRegBitsOff(dwIoBase, MAC_REG_HOSTCR, HOSTCR_TXON);
+
+    // W_MAX_TIMEOUT is the timeout period
+    for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+        VNSvInPortB(dwIoBase + MAC_REG_HOSTCR, &byData);
+        if (BITbIsAllBitsOff(byData, HOSTCR_TXONST))
+            break;
+    }
+    if (ww == W_MAX_TIMEOUT) {
+        DBG_PORT80(0x24);
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" DBG_PORT80(0x24)\n");
+        return(FALSE);
+    }
+    return TRUE;
+}
+
+/*
+ * Description:
+ *      Stop MAC function
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - Base Address for MAC
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if success; otherwise FALSE
+ *
+ */
+BOOL MACbSafeStop (DWORD_PTR dwIoBase)
+{
+    MACvRegBitsOff(dwIoBase, MAC_REG_TCR, TCR_AUTOBCNTX);
+
+    if (MACbSafeRxOff(dwIoBase) == FALSE) {
+        DBG_PORT80(0xA1);
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" MACbSafeRxOff == FALSE)\n");
+        MACbSafeSoftwareReset(dwIoBase);
+        return FALSE;
+    }
+    if (MACbSafeTxOff(dwIoBase) == FALSE) {
+        DBG_PORT80(0xA2);
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" MACbSafeTxOff == FALSE)\n");
+        MACbSafeSoftwareReset(dwIoBase);
+        return FALSE;
+    }
+
+    MACvRegBitsOff(dwIoBase, MAC_REG_HOSTCR, HOSTCR_MACEN);
+
+    return TRUE;
+}
+
+/*
+ * Description:
+ *      Shut Down MAC
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - Base Address for MAC
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if success; otherwise FALSE
+ *
+ */
+BOOL MACbShutdown (DWORD_PTR dwIoBase)
+{
+    // disable MAC IMR
+    MACvIntDisable(dwIoBase);
+    MACvSetLoopbackMode(dwIoBase, MAC_LB_INTERNAL);
+    // stop the adapter
+    if (!MACbSafeStop(dwIoBase)) {
+        MACvSetLoopbackMode(dwIoBase, MAC_LB_NONE);
+        return FALSE;
+    }
+    MACvSetLoopbackMode(dwIoBase, MAC_LB_NONE);
+    return TRUE;
+}
+
+/*
+ * Description:
+ *      Initialize MAC
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - Base Address for MAC
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void MACvInitialize (DWORD_PTR dwIoBase)
+{
+    // clear sticky bits
+    MACvClearStckDS(dwIoBase);
+    // disable force PME-enable
+    VNSvOutPortB(dwIoBase + MAC_REG_PMC1, PME_OVR);
+    // only 3253 A
+    /*
+    MACvPwrEvntDisable(dwIoBase);
+    // clear power status
+    VNSvOutPortW(dwIoBase + MAC_REG_WAKEUPSR0, 0x0F0F);
+    */
+
+    // do reset
+    MACbSoftwareReset(dwIoBase);
+
+    // issue AUTOLD in EECSR to reload eeprom
+    //MACvRegBitsOn(dwIoBase, MAC_REG_I2MCSR, I2MCSR_AUTOLD);
+    // wait until EEPROM loading complete
+    //while (TRUE) {
+    //    U8 u8Data;
+    //    VNSvInPortB(dwIoBase + MAC_REG_I2MCSR, &u8Data);
+    //    if (BITbIsBitOff(u8Data, I2MCSR_AUTOLD))
+    //        break;
+    //}
+
+    // reset TSF counter
+    VNSvOutPortB(dwIoBase + MAC_REG_TFTCTL, TFTCTL_TSFCNTRST);
+    // enable TSF counter
+    VNSvOutPortB(dwIoBase + MAC_REG_TFTCTL, TFTCTL_TSFCNTREN);
+
+
+    // set packet filter
+    // receive directed and broadcast address
+
+    MACvSetPacketFilter(dwIoBase, PKT_TYPE_DIRECTED | PKT_TYPE_BROADCAST);
+
+}
+
+/*
+ * Description:
+ *      Set the chip with current rx descriptor address
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase        - Base Address for MAC
+ *      dwCurrDescAddr  - Descriptor Address
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void MACvSetCurrRx0DescAddr (DWORD_PTR dwIoBase, DWORD dwCurrDescAddr)
+{
+WORD    ww;
+BYTE    byData;
+BYTE    byOrgDMACtl;
+
+    VNSvInPortB(dwIoBase + MAC_REG_RXDMACTL0, &byOrgDMACtl);
+    if (BITbIsAllBitsOn(byOrgDMACtl, DMACTL_RUN)) {
+        VNSvOutPortB(dwIoBase + MAC_REG_RXDMACTL0+2, DMACTL_RUN);
+    }
+    for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+        VNSvInPortB(dwIoBase + MAC_REG_RXDMACTL0, &byData);
+        if (BITbIsAllBitsOff(byData, DMACTL_RUN))
+            break;
+    }
+    if (ww == W_MAX_TIMEOUT) {
+        DBG_PORT80(0x13);
+    }
+    VNSvOutPortD(dwIoBase + MAC_REG_RXDMAPTR0, dwCurrDescAddr);
+    if (BITbIsAllBitsOn(byOrgDMACtl, DMACTL_RUN)) {
+        VNSvOutPortB(dwIoBase + MAC_REG_RXDMACTL0, DMACTL_RUN);
+    }
+}
+
+/*
+ * Description:
+ *      Set the chip with current rx descriptor address
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase        - Base Address for MAC
+ *      dwCurrDescAddr  - Descriptor Address
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void MACvSetCurrRx1DescAddr (DWORD_PTR dwIoBase, DWORD dwCurrDescAddr)
+{
+WORD    ww;
+BYTE    byData;
+BYTE    byOrgDMACtl;
+
+    VNSvInPortB(dwIoBase + MAC_REG_RXDMACTL1, &byOrgDMACtl);
+    if (BITbIsAllBitsOn(byOrgDMACtl, DMACTL_RUN)) {
+        VNSvOutPortB(dwIoBase + MAC_REG_RXDMACTL1+2, DMACTL_RUN);
+    }
+    for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+        VNSvInPortB(dwIoBase + MAC_REG_RXDMACTL1, &byData);
+        if (BITbIsAllBitsOff(byData, DMACTL_RUN))
+            break;
+    }
+    if (ww == W_MAX_TIMEOUT) {
+        DBG_PORT80(0x14);
+    }
+    VNSvOutPortD(dwIoBase + MAC_REG_RXDMAPTR1, dwCurrDescAddr);
+    if (BITbIsAllBitsOn(byOrgDMACtl, DMACTL_RUN)) {
+        VNSvOutPortB(dwIoBase + MAC_REG_RXDMACTL1, DMACTL_RUN);
+    }
+}
+
+/*
+ * Description:
+ *      Set the chip with current tx0 descriptor address
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase        - Base Address for MAC
+ *      dwCurrDescAddr  - Descriptor Address
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void MACvSetCurrTx0DescAddrEx (DWORD_PTR dwIoBase, DWORD dwCurrDescAddr)
+{
+WORD    ww;
+BYTE    byData;
+BYTE    byOrgDMACtl;
+
+    VNSvInPortB(dwIoBase + MAC_REG_TXDMACTL0, &byOrgDMACtl);
+    if (BITbIsAllBitsOn(byOrgDMACtl, DMACTL_RUN)) {
+        VNSvOutPortB(dwIoBase + MAC_REG_TXDMACTL0+2, DMACTL_RUN);
+    }
+    for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+        VNSvInPortB(dwIoBase + MAC_REG_TXDMACTL0, &byData);
+        if (BITbIsAllBitsOff(byData, DMACTL_RUN))
+            break;
+    }
+    if (ww == W_MAX_TIMEOUT) {
+        DBG_PORT80(0x25);
+    }
+    VNSvOutPortD(dwIoBase + MAC_REG_TXDMAPTR0, dwCurrDescAddr);
+    if (BITbIsAllBitsOn(byOrgDMACtl, DMACTL_RUN)) {
+        VNSvOutPortB(dwIoBase + MAC_REG_TXDMACTL0, DMACTL_RUN);
+    }
+}
+
+/*
+ * Description:
+ *      Set the chip with current AC0 descriptor address
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase        - Base Address for MAC
+ *      dwCurrDescAddr  - Descriptor Address
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+ //TxDMA1 = AC0DMA
+void MACvSetCurrAC0DescAddrEx (DWORD_PTR dwIoBase, DWORD dwCurrDescAddr)
+{
+WORD    ww;
+BYTE    byData;
+BYTE    byOrgDMACtl;
+
+    VNSvInPortB(dwIoBase + MAC_REG_AC0DMACTL, &byOrgDMACtl);
+    if (BITbIsAllBitsOn(byOrgDMACtl, DMACTL_RUN)) {
+        VNSvOutPortB(dwIoBase + MAC_REG_AC0DMACTL+2, DMACTL_RUN);
+    }
+    for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+        VNSvInPortB(dwIoBase + MAC_REG_AC0DMACTL, &byData);
+        if (BITbIsAllBitsOff(byData, DMACTL_RUN))
+            break;
+    }
+    if (ww == W_MAX_TIMEOUT) {
+        DBG_PORT80(0x26);
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" DBG_PORT80(0x26)\n");
+    }
+    VNSvOutPortD(dwIoBase + MAC_REG_AC0DMAPTR, dwCurrDescAddr);
+    if (BITbIsAllBitsOn(byOrgDMACtl, DMACTL_RUN)) {
+        VNSvOutPortB(dwIoBase + MAC_REG_AC0DMACTL, DMACTL_RUN);
+    }
+}
+
+
+
+void MACvSetCurrTXDescAddr (int iTxType, DWORD_PTR dwIoBase, DWORD dwCurrDescAddr)
+{
+    if(iTxType == TYPE_AC0DMA){
+        MACvSetCurrAC0DescAddrEx(dwIoBase, dwCurrDescAddr);
+    }else if(iTxType == TYPE_TXDMA0){
+        MACvSetCurrTx0DescAddrEx(dwIoBase, dwCurrDescAddr);
+    }
+}
+
+/*
+ * Description:
+ *      Micro Second Delay via MAC
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - Base Address for MAC
+ *      uDelay      - Delay time (timer resolution is 4 us)
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+VOID MACvTimer0MicroSDelay (DWORD_PTR dwIoBase, UINT uDelay)
+{
+BYTE byValue;
+UINT uu,ii;
+
+    VNSvOutPortB(dwIoBase + MAC_REG_TMCTL0, 0);
+    VNSvOutPortD(dwIoBase + MAC_REG_TMDATA0, uDelay);
+    VNSvOutPortB(dwIoBase + MAC_REG_TMCTL0, (TMCTL_TMD | TMCTL_TE));
+    for(ii=0;ii<66;ii++) {  // assume max PCI clock is 66Mhz
+        for (uu = 0; uu < uDelay; uu++) {
+            VNSvInPortB(dwIoBase + MAC_REG_TMCTL0, &byValue);
+            if ((byValue == 0) ||
+                (BITbIsAllBitsOn(byValue, TMCTL_TSUSP))) {
+                VNSvOutPortB(dwIoBase + MAC_REG_TMCTL0, 0);
+                return;
+            }
+        }
+    }
+    VNSvOutPortB(dwIoBase + MAC_REG_TMCTL0, 0);
+
+}
+
+/*
+ * Description:
+ *      Micro Second One shot timer via MAC
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - Base Address for MAC
+ *      uDelay      - Delay time
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void MACvOneShotTimer0MicroSec (DWORD_PTR dwIoBase, UINT uDelayTime)
+{
+    VNSvOutPortB(dwIoBase + MAC_REG_TMCTL0, 0);
+    VNSvOutPortD(dwIoBase + MAC_REG_TMDATA0, uDelayTime);
+    VNSvOutPortB(dwIoBase + MAC_REG_TMCTL0, (TMCTL_TMD | TMCTL_TE));
+}
+
+/*
+ * Description:
+ *      Micro Second One shot timer via MAC
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - Base Address for MAC
+ *      uDelay      - Delay time
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void MACvOneShotTimer1MicroSec (DWORD_PTR dwIoBase, UINT uDelayTime)
+{
+    VNSvOutPortB(dwIoBase + MAC_REG_TMCTL1, 0);
+    VNSvOutPortD(dwIoBase + MAC_REG_TMDATA1, uDelayTime);
+    VNSvOutPortB(dwIoBase + MAC_REG_TMCTL1, (TMCTL_TMD | TMCTL_TE));
+}
+
+
+void MACvSetMISCFifo (DWORD_PTR dwIoBase, WORD wOffset, DWORD dwData)
+{
+    if (wOffset > 273)
+        return;
+    VNSvOutPortW(dwIoBase + MAC_REG_MISCFFNDEX, wOffset);
+    VNSvOutPortD(dwIoBase + MAC_REG_MISCFFDATA, dwData);
+    VNSvOutPortW(dwIoBase + MAC_REG_MISCFFCTL, MISCFFCTL_WRITE);
+}
+
+
+BOOL MACbTxDMAOff (DWORD_PTR dwIoBase, UINT idx)
+{
+BYTE byData;
+UINT ww = 0;
+
+    if (idx == TYPE_TXDMA0) {
+        VNSvOutPortB(dwIoBase + MAC_REG_TXDMACTL0+2, DMACTL_RUN);
+        for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+            VNSvInPortB(dwIoBase + MAC_REG_TXDMACTL0, &byData);
+            if (BITbIsAllBitsOff(byData, DMACTL_RUN))
+                break;
+        }
+    } else if (idx == TYPE_AC0DMA) {
+        VNSvOutPortB(dwIoBase + MAC_REG_AC0DMACTL+2, DMACTL_RUN);
+        for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+            VNSvInPortB(dwIoBase + MAC_REG_AC0DMACTL, &byData);
+            if (BITbIsAllBitsOff(byData, DMACTL_RUN))
+                break;
+        }
+    }
+    if (ww == W_MAX_TIMEOUT) {
+        DBG_PORT80(0x29);
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" DBG_PORT80(0x29)\n");
+        return FALSE;
+    }
+    return TRUE;
+}
+
+void MACvClearBusSusInd (DWORD_PTR dwIoBase)
+{
+    DWORD dwOrgValue;
+    UINT ww;
+    // check if BcnSusInd enabled
+    VNSvInPortD(dwIoBase + MAC_REG_ENCFG , &dwOrgValue);
+    if(BITbIsBitOff(dwOrgValue, EnCFG_BcnSusInd))
+        return;
+    //Set BcnSusClr
+    dwOrgValue = dwOrgValue | EnCFG_BcnSusClr;
+    VNSvOutPortD(dwIoBase + MAC_REG_ENCFG, dwOrgValue);
+    for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+        VNSvInPortD(dwIoBase + MAC_REG_ENCFG , &dwOrgValue);
+        if(BITbIsBitOff(dwOrgValue, EnCFG_BcnSusInd))
+            break;
+    }
+    if (ww == W_MAX_TIMEOUT) {
+        DBG_PORT80(0x33);
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" DBG_PORT80(0x33)\n");
+    }
+}
+
+void MACvEnableBusSusEn (DWORD_PTR dwIoBase)
+{
+    BYTE  byOrgValue;
+    DWORD dwOrgValue;
+    UINT ww;
+    // check if BcnSusInd enabled
+    VNSvInPortB(dwIoBase + MAC_REG_CFG , &byOrgValue);
+
+    //Set BcnSusEn
+    byOrgValue = byOrgValue | CFG_BCNSUSEN;
+    VNSvOutPortB(dwIoBase + MAC_REG_ENCFG, byOrgValue);
+    for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+        VNSvInPortD(dwIoBase + MAC_REG_ENCFG , &dwOrgValue);
+        if(BITbIsBitOn(dwOrgValue, EnCFG_BcnSusInd))
+            break;
+    }
+    if (ww == W_MAX_TIMEOUT) {
+        DBG_PORT80(0x34);
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" DBG_PORT80(0x34)\n");
+    }
+}
+
+BOOL MACbFlushSYNCFifo (DWORD_PTR dwIoBase)
+{
+    BYTE  byOrgValue;
+    UINT ww;
+    // Read MACCR
+    VNSvInPortB(dwIoBase + MAC_REG_MACCR , &byOrgValue);
+
+    // Set SYNCFLUSH
+    byOrgValue = byOrgValue | MACCR_SYNCFLUSH;
+    VNSvOutPortB(dwIoBase + MAC_REG_MACCR, byOrgValue);
+
+    // Check if SyncFlushOK
+    for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+        VNSvInPortB(dwIoBase + MAC_REG_MACCR , &byOrgValue);
+        if(BITbIsBitOn(byOrgValue, MACCR_SYNCFLUSHOK))
+            break;
+    }
+    if (ww == W_MAX_TIMEOUT) {
+        DBG_PORT80(0x35);
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" DBG_PORT80(0x33)\n");
+    }
+    return TRUE;
+}
+
+BOOL MACbPSWakeup (DWORD_PTR dwIoBase)
+{
+    BYTE  byOrgValue;
+    UINT ww;
+    // Read PSCTL
+    if (MACbIsRegBitsOff(dwIoBase, MAC_REG_PSCTL, PSCTL_PS)) {
+        return TRUE;
+    }
+    // Disable PS
+    MACvRegBitsOff(dwIoBase, MAC_REG_PSCTL, PSCTL_PSEN);
+
+    // Check if SyncFlushOK
+    for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+        VNSvInPortB(dwIoBase + MAC_REG_PSCTL , &byOrgValue);
+        if(BITbIsBitOn(byOrgValue, PSCTL_WAKEDONE))
+            break;
+    }
+    if (ww == W_MAX_TIMEOUT) {
+        DBG_PORT80(0x36);
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" DBG_PORT80(0x33)\n");
+        return FALSE;
+    }
+    return TRUE;
+}
+
+/*
+ * Description:
+ *      Set the Key by MISCFIFO
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase        - Base Address for MAC
+ *
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+
+void MACvSetKeyEntry (DWORD_PTR dwIoBase, WORD wKeyCtl, UINT uEntryIdx, UINT uKeyIdx, PBYTE pbyAddr, PDWORD pdwKey, BYTE byLocalID)
+{
+WORD    wOffset;
+DWORD   dwData;
+int     ii;
+
+    if (byLocalID <= 1)
+        return;
+
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"MACvSetKeyEntry\n");
+    wOffset = MISCFIFO_KEYETRY0;
+    wOffset += (uEntryIdx * MISCFIFO_KEYENTRYSIZE);
+
+    dwData = 0;
+    dwData |= wKeyCtl;
+    dwData <<= 16;
+    dwData |= MAKEWORD(*(pbyAddr+4), *(pbyAddr+5));
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"1. wOffset: %d, Data: %lX, KeyCtl:%X\n", wOffset, dwData, wKeyCtl);
+
+    VNSvOutPortW(dwIoBase + MAC_REG_MISCFFNDEX, wOffset);
+    VNSvOutPortD(dwIoBase + MAC_REG_MISCFFDATA, dwData);
+    VNSvOutPortW(dwIoBase + MAC_REG_MISCFFCTL, MISCFFCTL_WRITE);
+    wOffset++;
+
+    dwData = 0;
+    dwData |= *(pbyAddr+3);
+    dwData <<= 8;
+    dwData |= *(pbyAddr+2);
+    dwData <<= 8;
+    dwData |= *(pbyAddr+1);
+    dwData <<= 8;
+    dwData |= *(pbyAddr+0);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"2. wOffset: %d, Data: %lX\n", wOffset, dwData);
+
+    VNSvOutPortW(dwIoBase + MAC_REG_MISCFFNDEX, wOffset);
+    VNSvOutPortD(dwIoBase + MAC_REG_MISCFFDATA, dwData);
+    VNSvOutPortW(dwIoBase + MAC_REG_MISCFFCTL, MISCFFCTL_WRITE);
+    wOffset++;
+
+    wOffset += (uKeyIdx * 4);
+    for (ii=0;ii<4;ii++) {
+        // alway push 128 bits
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"3.(%d) wOffset: %d, Data: %lX\n", ii, wOffset+ii, *pdwKey);
+        VNSvOutPortW(dwIoBase + MAC_REG_MISCFFNDEX, wOffset+ii);
+        VNSvOutPortD(dwIoBase + MAC_REG_MISCFFDATA, *pdwKey++);
+        VNSvOutPortW(dwIoBase + MAC_REG_MISCFFCTL, MISCFFCTL_WRITE);
+    }
+}
+
+
+
+/*
+ * Description:
+ *      Disable the Key Entry by MISCFIFO
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase        - Base Address for MAC
+ *
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void MACvDisableKeyEntry (DWORD_PTR dwIoBase, UINT uEntryIdx)
+{
+WORD    wOffset;
+
+    wOffset = MISCFIFO_KEYETRY0;
+    wOffset += (uEntryIdx * MISCFIFO_KEYENTRYSIZE);
+
+    VNSvOutPortW(dwIoBase + MAC_REG_MISCFFNDEX, wOffset);
+    VNSvOutPortD(dwIoBase + MAC_REG_MISCFFDATA, 0);
+    VNSvOutPortW(dwIoBase + MAC_REG_MISCFFCTL, MISCFFCTL_WRITE);
+}
+
+
+/*
+ * Description:
+ *      Set the default Key (KeyEntry[10]) by MISCFIFO
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase        - Base Address for MAC
+ *
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+
+void MACvSetDefaultKeyEntry (DWORD_PTR dwIoBase, UINT uKeyLen, UINT uKeyIdx, PDWORD pdwKey, BYTE byLocalID)
+{
+WORD    wOffset;
+DWORD   dwData;
+int     ii;
+
+    if (byLocalID <= 1)
+        return;
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"MACvSetDefaultKeyEntry\n");
+    wOffset = MISCFIFO_KEYETRY0;
+    wOffset += (10 * MISCFIFO_KEYENTRYSIZE);
+
+    wOffset++;
+    wOffset++;
+    wOffset += (uKeyIdx * 4);
+    // alway push 128 bits
+    for (ii=0; ii<3; ii++) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"(%d) wOffset: %d, Data: %lX\n", ii, wOffset+ii, *pdwKey);
+        VNSvOutPortW(dwIoBase + MAC_REG_MISCFFNDEX, wOffset+ii);
+        VNSvOutPortD(dwIoBase + MAC_REG_MISCFFDATA, *pdwKey++);
+        VNSvOutPortW(dwIoBase + MAC_REG_MISCFFCTL, MISCFFCTL_WRITE);
+    }
+    dwData = *pdwKey;
+    if (uKeyLen == WLAN_WEP104_KEYLEN) {
+        dwData |= 0x80000000;
+    }
+    VNSvOutPortW(dwIoBase + MAC_REG_MISCFFNDEX, wOffset+3);
+    VNSvOutPortD(dwIoBase + MAC_REG_MISCFFDATA, dwData);
+    VNSvOutPortW(dwIoBase + MAC_REG_MISCFFCTL, MISCFFCTL_WRITE);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"End. wOffset: %d, Data: %lX\n", wOffset+3, dwData);
+
+}
+
+
+/*
+ * Description:
+ *      Enable default Key (KeyEntry[10]) by MISCFIFO
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase        - Base Address for MAC
+ *
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+/*
+void MACvEnableDefaultKey (DWORD_PTR dwIoBase, BYTE byLocalID)
+{
+WORD    wOffset;
+DWORD   dwData;
+
+
+    if (byLocalID <= 1)
+        return;
+
+    wOffset = MISCFIFO_KEYETRY0;
+    wOffset += (10 * MISCFIFO_KEYENTRYSIZE);
+
+    dwData = 0xC0440000;
+    VNSvOutPortW(dwIoBase + MAC_REG_MISCFFNDEX, wOffset);
+    VNSvOutPortD(dwIoBase + MAC_REG_MISCFFDATA, dwData);
+    VNSvOutPortW(dwIoBase + MAC_REG_MISCFFCTL, MISCFFCTL_WRITE);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"MACvEnableDefaultKey: wOffset: %d, Data: %lX\n", wOffset, dwData);
+
+}
+*/
+
+/*
+ * Description:
+ *      Disable default Key (KeyEntry[10]) by MISCFIFO
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase        - Base Address for MAC
+ *
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void MACvDisableDefaultKey (DWORD_PTR dwIoBase)
+{
+WORD    wOffset;
+DWORD   dwData;
+
+
+    wOffset = MISCFIFO_KEYETRY0;
+    wOffset += (10 * MISCFIFO_KEYENTRYSIZE);
+
+    dwData = 0x0;
+    VNSvOutPortW(dwIoBase + MAC_REG_MISCFFNDEX, wOffset);
+    VNSvOutPortD(dwIoBase + MAC_REG_MISCFFDATA, dwData);
+    VNSvOutPortW(dwIoBase + MAC_REG_MISCFFCTL, MISCFFCTL_WRITE);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"MACvDisableDefaultKey: wOffset: %d, Data: %lX\n", wOffset, dwData);
+}
+
+/*
+ * Description:
+ *      Set the default TKIP Group Key (KeyEntry[10]) by MISCFIFO
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase        - Base Address for MAC
+ *
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void MACvSetDefaultTKIPKeyEntry (DWORD_PTR dwIoBase, UINT uKeyLen, UINT uKeyIdx, PDWORD pdwKey, BYTE byLocalID)
+{
+WORD    wOffset;
+DWORD   dwData;
+int     ii;
+
+    if (byLocalID <= 1)
+        return;
+
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"MACvSetDefaultTKIPKeyEntry\n");
+    wOffset = MISCFIFO_KEYETRY0;
+    // Kyle test : change offset from 10 -> 0
+    wOffset += (10 * MISCFIFO_KEYENTRYSIZE);
+
+    dwData = 0xC0660000;
+    VNSvOutPortW(dwIoBase + MAC_REG_MISCFFNDEX, wOffset);
+    VNSvOutPortD(dwIoBase + MAC_REG_MISCFFDATA, dwData);
+    VNSvOutPortW(dwIoBase + MAC_REG_MISCFFCTL, MISCFFCTL_WRITE);
+    wOffset++;
+
+    dwData = 0;
+    VNSvOutPortW(dwIoBase + MAC_REG_MISCFFNDEX, wOffset);
+    VNSvOutPortD(dwIoBase + MAC_REG_MISCFFDATA, dwData);
+    VNSvOutPortW(dwIoBase + MAC_REG_MISCFFCTL, MISCFFCTL_WRITE);
+    wOffset++;
+
+    wOffset += (uKeyIdx * 4);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"1. wOffset: %d, Data: %lX, idx:%d\n", wOffset, *pdwKey, uKeyIdx);
+    // alway push 128 bits
+    for (ii=0; ii<4; ii++) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"2.(%d) wOffset: %d, Data: %lX\n", ii, wOffset+ii, *pdwKey);
+        VNSvOutPortW(dwIoBase + MAC_REG_MISCFFNDEX, wOffset+ii);
+        VNSvOutPortD(dwIoBase + MAC_REG_MISCFFDATA, *pdwKey++);
+        VNSvOutPortW(dwIoBase + MAC_REG_MISCFFCTL, MISCFFCTL_WRITE);
+    }
+
+}
+
+
+
+/*
+ * Description:
+ *      Set the Key Control by MISCFIFO
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase        - Base Address for MAC
+ *
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+
+void MACvSetDefaultKeyCtl (DWORD_PTR dwIoBase, WORD wKeyCtl, UINT uEntryIdx, BYTE byLocalID)
+{
+WORD    wOffset;
+DWORD   dwData;
+
+    if (byLocalID <= 1)
+        return;
+
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"MACvSetKeyEntry\n");
+    wOffset = MISCFIFO_KEYETRY0;
+    wOffset += (uEntryIdx * MISCFIFO_KEYENTRYSIZE);
+
+    dwData = 0;
+    dwData |= wKeyCtl;
+    dwData <<= 16;
+    dwData |= 0xffff;
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"1. wOffset: %d, Data: %lX, KeyCtl:%X\n", wOffset, dwData, wKeyCtl);
+
+    VNSvOutPortW(dwIoBase + MAC_REG_MISCFFNDEX, wOffset);
+    VNSvOutPortD(dwIoBase + MAC_REG_MISCFFDATA, dwData);
+    VNSvOutPortW(dwIoBase + MAC_REG_MISCFFCTL, MISCFFCTL_WRITE);
+
+}
+
diff --git a/drivers/staging/vt6655/mac.h b/drivers/staging/vt6655/mac.h
new file mode 100644
index 00000000000..edb70965d4d
--- /dev/null
+++ b/drivers/staging/vt6655/mac.h
@@ -0,0 +1,1166 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: mac.h
+ *
+ * Purpose: MAC routines
+ *
+ * Author: Tevin Chen
+ *
+ * Date: May 21, 1996
+ * Revision History:
+ *      07-01-2003 Bryan YC Fan:  Re-write codes to support VT3253 spec.
+ *      08-25-2003 Kyle Hsu:      Porting MAC functions from sim53.
+ *      09-03-2003 Bryan YC Fan:  Add MACvDisableProtectMD & MACvEnableProtectMD
+ *
+ */
+
+#ifndef __MAC_H__
+#define __MAC_H__
+
+
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+#if !defined(__TMACRO_H__)
+#include "tmacro.h"
+#endif
+#if !defined(__UPC_H__)
+#include "upc.h"
+#endif
+
+/*---------------------  Export Definitions -------------------------*/
+//
+// Registers in the MAC
+//
+#define MAC_MAX_CONTEXT_SIZE_PAGE0  256
+#define MAC_MAX_CONTEXT_SIZE_PAGE1  128
+#define MAC_MAX_CONTEXT_SIZE        MAC_MAX_CONTEXT_SIZE_PAGE0 + MAC_MAX_CONTEXT_SIZE_PAGE1
+
+// Registers not related to 802.11b
+#define MAC_REG_BCFG0       0x00
+#define MAC_REG_BCFG1       0x01
+#define MAC_REG_FCR0        0x02
+#define MAC_REG_FCR1        0x03
+#define MAC_REG_BISTCMD     0x04
+#define MAC_REG_BISTSR0     0x05
+#define MAC_REG_BISTSR1     0x06
+#define MAC_REG_BISTSR2     0x07
+#define MAC_REG_I2MCSR      0x08
+#define MAC_REG_I2MTGID     0x09
+#define MAC_REG_I2MTGAD     0x0A
+#define MAC_REG_I2MCFG      0x0B
+#define MAC_REG_I2MDIPT     0x0C
+#define MAC_REG_I2MDOPT     0x0E
+#define MAC_REG_PMC0        0x10
+#define MAC_REG_PMC1        0x11
+#define MAC_REG_STICKHW     0x12
+#define MAC_REG_LOCALID     0x14
+#define MAC_REG_TESTCFG     0x15
+#define MAC_REG_JUMPER0     0x16
+#define MAC_REG_JUMPER1     0x17
+#define MAC_REG_TMCTL0      0x18
+#define MAC_REG_TMCTL1      0x19
+#define MAC_REG_TMDATA0     0x1C
+// MAC Parameter related
+#define MAC_REG_LRT         0x20        //
+#define MAC_REG_SRT         0x21        //
+#define MAC_REG_SIFS        0x22        //
+#define MAC_REG_DIFS        0x23        //
+#define MAC_REG_EIFS        0x24        //
+#define MAC_REG_SLOT        0x25        //
+#define MAC_REG_BI          0x26        //
+#define MAC_REG_CWMAXMIN0   0x28        //
+#define MAC_REG_LINKOFFTOTM 0x2A
+#define MAC_REG_SWTMOT      0x2B
+#define MAC_REG_MIBCNTR     0x2C
+#define MAC_REG_RTSOKCNT    0x2C
+#define MAC_REG_RTSFAILCNT  0x2D
+#define MAC_REG_ACKFAILCNT  0x2E
+#define MAC_REG_FCSERRCNT   0x2F
+// TSF Related
+#define MAC_REG_TSFCNTR     0x30        //
+#define MAC_REG_NEXTTBTT    0x38        //
+#define MAC_REG_TSFOFST     0x40        //
+#define MAC_REG_TFTCTL      0x48        //
+// WMAC Control/Status Related
+#define MAC_REG_ENCFG       0x4C        //
+#define MAC_REG_PAGE1SEL    0x4F        //
+#define MAC_REG_CFG         0x50        //
+#define MAC_REG_TEST        0x52        //
+#define MAC_REG_HOSTCR      0x54        //
+#define MAC_REG_MACCR       0x55        //
+#define MAC_REG_RCR         0x56        //
+#define MAC_REG_TCR         0x57        //
+#define MAC_REG_IMR         0x58        //
+#define MAC_REG_ISR         0x5C
+// Power Saving Related
+#define MAC_REG_PSCFG       0x60        //
+#define MAC_REG_PSCTL       0x61        //
+#define MAC_REG_PSPWRSIG    0x62        //
+#define MAC_REG_BBCR13      0x63
+#define MAC_REG_AIDATIM     0x64
+#define MAC_REG_PWBT        0x66
+#define MAC_REG_WAKEOKTMR   0x68
+#define MAC_REG_CALTMR      0x69
+#define MAC_REG_SYNSPACCNT  0x6A
+#define MAC_REG_WAKSYNOPT   0x6B
+// Baseband/IF Control Group
+#define MAC_REG_BBREGCTL    0x6C        //
+#define MAC_REG_CHANNEL     0x6D
+#define MAC_REG_BBREGADR    0x6E
+#define MAC_REG_BBREGDATA   0x6F
+#define MAC_REG_IFREGCTL    0x70        //
+#define MAC_REG_IFDATA      0x71        //
+#define MAC_REG_ITRTMSET    0x74        //
+#define MAC_REG_PAPEDELAY   0x77        //
+#define MAC_REG_SOFTPWRCTL  0x78        //
+#define MAC_REG_GPIOCTL0    0x7A        //
+#define MAC_REG_GPIOCTL1    0x7B        //
+
+// MAC DMA Related Group
+#define MAC_REG_TXDMACTL0   0x7C        //
+#define MAC_REG_TXDMAPTR0   0x80        //
+#define MAC_REG_AC0DMACTL   0x84        //
+#define MAC_REG_AC0DMAPTR   0x88        //
+#define MAC_REG_BCNDMACTL   0x8C        //
+#define MAC_REG_BCNDMAPTR   0x90        //
+#define MAC_REG_RXDMACTL0   0x94        //
+#define MAC_REG_RXDMAPTR0   0x98        //
+#define MAC_REG_RXDMACTL1   0x9C        //
+#define MAC_REG_RXDMAPTR1   0xA0        //
+#define MAC_REG_SYNCDMACTL  0xA4        //
+#define MAC_REG_SYNCDMAPTR  0xA8
+#define MAC_REG_ATIMDMACTL  0xAC
+#define MAC_REG_ATIMDMAPTR  0xB0
+// MiscFF PIO related
+#define MAC_REG_MISCFFNDEX  0xB4
+#define MAC_REG_MISCFFCTL   0xB6
+#define MAC_REG_MISCFFDATA  0xB8
+// Extend SW Timer
+#define MAC_REG_TMDATA1     0xBC
+// WOW Related Group
+#define MAC_REG_WAKEUPEN0   0xC0
+#define MAC_REG_WAKEUPEN1   0xC1
+#define MAC_REG_WAKEUPSR0   0xC2
+#define MAC_REG_WAKEUPSR1   0xC3
+#define MAC_REG_WAKE128_0   0xC4
+#define MAC_REG_WAKE128_1   0xD4
+#define MAC_REG_WAKE128_2   0xE4
+#define MAC_REG_WAKE128_3   0xF4
+
+/////////////// Page 1 ///////////////////
+#define MAC_REG_CRC_128_0   0x04
+#define MAC_REG_CRC_128_1   0x06
+#define MAC_REG_CRC_128_2   0x08
+#define MAC_REG_CRC_128_3   0x0A
+// MAC Configuration Group
+#define MAC_REG_PAR0        0x0C
+#define MAC_REG_PAR4        0x10
+#define MAC_REG_BSSID0      0x14
+#define MAC_REG_BSSID4      0x18
+#define MAC_REG_MAR0        0x1C
+#define MAC_REG_MAR4        0x20
+// MAC RSPPKT INFO Group
+#define MAC_REG_RSPINF_B_1  0x24
+#define MAC_REG_RSPINF_B_2  0x28
+#define MAC_REG_RSPINF_B_5  0x2C
+#define MAC_REG_RSPINF_B_11 0x30
+#define MAC_REG_RSPINF_A_6  0x34
+#define MAC_REG_RSPINF_A_9  0x36
+#define MAC_REG_RSPINF_A_12 0x38
+#define MAC_REG_RSPINF_A_18 0x3A
+#define MAC_REG_RSPINF_A_24 0x3C
+#define MAC_REG_RSPINF_A_36 0x3E
+#define MAC_REG_RSPINF_A_48 0x40
+#define MAC_REG_RSPINF_A_54 0x42
+#define MAC_REG_RSPINF_A_72 0x44
+
+// 802.11h relative
+#define MAC_REG_QUIETINIT   0x60
+#define MAC_REG_QUIETGAP    0x62
+#define MAC_REG_QUIETDUR    0x64
+#define MAC_REG_MSRCTL      0x66
+#define MAC_REG_MSRBBSTS    0x67
+#define MAC_REG_MSRSTART    0x68
+#define MAC_REG_MSRDURATION 0x70
+#define MAC_REG_CCAFRACTION 0x72
+#define MAC_REG_PWRCCK      0x73
+#define MAC_REG_PWROFDM     0x7C
+
+
+//
+// Bits in the BCFG0 register
+//
+#define BCFG0_PERROFF       0x40
+#define BCFG0_MRDMDIS       0x20
+#define BCFG0_MRDLDIS       0x10
+#define BCFG0_MWMEN         0x08
+#define BCFG0_VSERREN       0x02
+#define BCFG0_LATMEN        0x01
+
+//
+// Bits in the BCFG1 register
+//
+#define BCFG1_CFUNOPT       0x80
+#define BCFG1_CREQOPT       0x40
+#define BCFG1_DMA8          0x10
+#define BCFG1_ARBITOPT      0x08
+#define BCFG1_PCIMEN        0x04
+#define BCFG1_MIOEN         0x02
+#define BCFG1_CISDLYEN      0x01
+
+// Bits in RAMBIST registers
+#define BISTCMD_TSTPAT5     0x00        //
+#define BISTCMD_TSTPATA     0x80        //
+#define BISTCMD_TSTERR      0x20        //
+#define BISTCMD_TSTPATF     0x18        //
+#define BISTCMD_TSTPAT0     0x10        //
+#define BISTCMD_TSTMODE     0x04        //
+#define BISTCMD_TSTITTX     0x03        //
+#define BISTCMD_TSTATRX     0x02        //
+#define BISTCMD_TSTATTX     0x01        //
+#define BISTCMD_TSTRX       0x00        //
+#define BISTSR0_BISTGO      0x01        //
+#define BISTSR1_TSTSR       0x01        //
+#define BISTSR2_CMDPRTEN    0x02        //
+#define BISTSR2_RAMTSTEN    0x01        //
+
+//
+// Bits in the I2MCFG EEPROM register
+//
+#define I2MCFG_BOUNDCTL     0x80
+#define I2MCFG_WAITCTL      0x20
+#define I2MCFG_SCLOECTL     0x10
+#define I2MCFG_WBUSYCTL     0x08
+#define I2MCFG_NORETRY      0x04
+#define I2MCFG_I2MLDSEQ     0x02
+#define I2MCFG_I2CMFAST     0x01
+
+//
+// Bits in the I2MCSR EEPROM register
+//
+#define I2MCSR_EEMW         0x80
+#define I2MCSR_EEMR         0x40
+#define I2MCSR_AUTOLD       0x08
+#define I2MCSR_NACK         0x02
+#define I2MCSR_DONE         0x01
+
+//
+// Bits in the PMC1 register
+//
+#define SPS_RST             0x80
+#define PCISTIKY            0x40
+#define PME_OVR             0x02
+
+//
+// Bits in the STICKYHW register
+//
+#define STICKHW_DS1_SHADOW  0x02
+#define STICKHW_DS0_SHADOW  0x01
+
+//
+// Bits in the TMCTL register
+//
+#define TMCTL_TSUSP         0x04
+#define TMCTL_TMD           0x02
+#define TMCTL_TE            0x01
+
+//
+// Bits in the TFTCTL register
+//
+#define TFTCTL_HWUTSF       0x80        //
+#define TFTCTL_TBTTSYNC     0x40
+#define TFTCTL_HWUTSFEN     0x20
+#define TFTCTL_TSFCNTRRD    0x10        //
+#define TFTCTL_TBTTSYNCEN   0x08        //
+#define TFTCTL_TSFSYNCEN    0x04        //
+#define TFTCTL_TSFCNTRST    0x02        //
+#define TFTCTL_TSFCNTREN    0x01        //
+
+//
+// Bits in the EnhanceCFG register
+//
+#define EnCFG_BarkerPream   0x00020000
+#define EnCFG_NXTBTTCFPSTR  0x00010000
+//#define EnCFG_TXLMT3UPDATE  0x00008000
+//#define EnCFG_TXLMT2UPDATE  0x00004000
+//#define EnCFG_TXLMT1UPDATE  0x00002000
+//#define EnCFG_TXLMT3EN      0x00001000
+//#define EnCFG_TXLMT2EN      0x00000800
+//#define EnCFG_TXLMT1EN      0x00000400
+#define EnCFG_BcnSusClr     0x00000200
+#define EnCFG_BcnSusInd     0x00000100
+//#define EnCFG_CWOFF1        0x00000080
+#define EnCFG_CFP_ProtectEn 0x00000040
+#define EnCFG_ProtectMd     0x00000020
+#define EnCFG_HwParCFP      0x00000010
+//#define EnCFG_QOS           0x00000008
+#define EnCFG_CFNULRSP      0x00000004
+#define EnCFG_BBType_MASK   0x00000003
+#define EnCFG_BBType_g      0x00000002
+#define EnCFG_BBType_b      0x00000001
+#define EnCFG_BBType_a      0x00000000
+
+//
+// Bits in the Page1Sel register
+//
+#define PAGE1_SEL           0x01
+
+//
+// Bits in the CFG register
+//
+#define CFG_TKIPOPT         0x80
+#define CFG_RXDMAOPT        0x40
+#define CFG_TMOT_SW         0x20
+#define CFG_TMOT_HWLONG     0x10
+#define CFG_TMOT_HW         0x00
+#define CFG_CFPENDOPT       0x08
+#define CFG_BCNSUSEN        0x04
+#define CFG_NOTXTIMEOUT     0x02
+#define CFG_NOBUFOPT        0x01
+
+//
+// Bits in the TEST register
+//
+#define TEST_LBEXT          0x80        //
+#define TEST_LBINT          0x40        //
+#define TEST_LBNONE         0x00        //
+#define TEST_SOFTINT        0x20        //
+#define TEST_CONTTX         0x10        //
+#define TEST_TXPE           0x08        //
+#define TEST_NAVDIS         0x04        //
+#define TEST_NOCTS          0x02        //
+#define TEST_NOACK          0x01        //
+
+//
+// Bits in the HOSTCR register
+//
+#define HOSTCR_TXONST       0x80        //
+#define HOSTCR_RXONST       0x40        //
+#define HOSTCR_ADHOC        0x20        // Network Type 1 = Ad-hoc
+#define HOSTCR_AP           0x10        // Port Type 1 = AP
+#define HOSTCR_TXON         0x08        //0000 1000
+#define HOSTCR_RXON         0x04        //0000 0100
+#define HOSTCR_MACEN        0x02        //0000 0010
+#define HOSTCR_SOFTRST      0x01        //0000 0001
+
+//
+// Bits in the MACCR register
+//
+#define MACCR_SYNCFLUSHOK   0x04        //
+#define MACCR_SYNCFLUSH     0x02        //
+#define MACCR_CLRNAV        0x01        //
+
+// Bits in the MAC_REG_GPIOCTL0 register
+//
+#define LED_ACTSET           0x01        //
+#define LED_RFOFF            0x02        //
+#define LED_NOCONNECT        0x04        //
+//
+// Bits in the RCR register
+//
+#define RCR_SSID            0x80
+#define RCR_RXALLTYPE       0x40        //
+#define RCR_UNICAST         0x20        //
+#define RCR_BROADCAST       0x10        //
+#define RCR_MULTICAST       0x08        //
+#define RCR_WPAERR          0x04        //
+#define RCR_ERRCRC          0x02        //
+#define RCR_BSSID           0x01        //
+
+//
+// Bits in the TCR register
+//
+#define TCR_SYNCDCFOPT      0x02        //
+#define TCR_AUTOBCNTX       0x01        // Beacon automatically transmit enable
+
+//
+// Bits in the IMR register
+//
+#define IMR_MEASURESTART    0x80000000      //
+#define IMR_QUIETSTART      0x20000000      //
+#define IMR_RADARDETECT     0x10000000      //
+#define IMR_MEASUREEND      0x08000000      //
+#define IMR_SOFTTIMER1      0x00200000      //
+//#define IMR_SYNCFLUSHOK     0x00100000      //
+//#define IMR_ATIMEND         0x00080000      //0000 1000 0000 0000 0000 0000
+//#define IMR_CFPEND          0x00040000      //0000 0100 0000 0000 0000 0000
+//#define IMR_AC3DMA          0x00020000      //0000 0010 0000 0000 0000 0000
+//#define IMR_AC2DMA          0x00010000      //0000 0001 0000 0000 0000 0000
+//#define IMR_AC1DMA          0x00008000      //0000 0000 1000 0000 0000 0000
+//#define IMR_SYNCTX          0x00004000      //0000 0000 0100 0000 0000 0000
+//#define IMR_ATIMTX          0x00002000      //0000 0000 0010 0000 0000 0000
+#define IMR_RXDMA1          0x00001000      //0000 0000 0001 0000 0000 0000
+#define IMR_RXNOBUF         0x00000800      //
+#define IMR_MIBNEARFULL     0x00000400      //
+#define IMR_SOFTINT         0x00000200      //
+#define IMR_FETALERR        0x00000100      //
+#define IMR_WATCHDOG        0x00000080      //
+#define IMR_SOFTTIMER       0x00000040      //
+#define IMR_GPIO            0x00000020      //
+#define IMR_TBTT            0x00000010      //
+#define IMR_RXDMA0          0x00000008      //
+#define IMR_BNTX            0x00000004      //
+#define IMR_AC0DMA          0x00000002      //
+#define IMR_TXDMA0          0x00000001      //
+
+
+//
+// Bits in the ISR register
+//
+
+#define ISR_MEASURESTART    0x80000000      //
+#define ISR_QUIETSTART      0x20000000      //
+#define ISR_RADARDETECT     0x10000000      //
+#define ISR_MEASUREEND      0x08000000      //
+#define ISR_SOFTTIMER1      0x00200000      //
+//#define ISR_SYNCFLUSHOK     0x00100000      //0001 0000 0000 0000 0000 0000
+//#define ISR_ATIMEND         0x00080000      //0000 1000 0000 0000 0000 0000
+//#define ISR_CFPEND          0x00040000      //0000 0100 0000 0000 0000 0000
+//#define ISR_AC3DMA          0x00020000      //0000 0010 0000 0000 0000 0000
+//#define ISR_AC2DMA          0x00010000      //0000 0001 0000 0000 0000 0000
+//#define ISR_AC1DMA          0x00008000      //0000 0000 1000 0000 0000 0000
+//#define ISR_SYNCTX          0x00004000      //0000 0000 0100 0000 0000 0000
+//#define ISR_ATIMTX          0x00002000      //0000 0000 0010 0000 0000 0000
+#define ISR_RXDMA1          0x00001000      //0000 0000 0001 0000 0000 0000
+#define ISR_RXNOBUF         0x00000800      //0000 0000 0000 1000 0000 0000
+#define ISR_MIBNEARFULL     0x00000400      //0000 0000 0000 0100 0000 0000
+#define ISR_SOFTINT         0x00000200      //
+#define ISR_FETALERR        0x00000100      //
+#define ISR_WATCHDOG        0x00000080      //
+#define ISR_SOFTTIMER       0x00000040      //
+#define ISR_GPIO            0x00000020      //
+#define ISR_TBTT            0x00000010      //
+#define ISR_RXDMA0          0x00000008      //
+#define ISR_BNTX            0x00000004      //
+#define ISR_AC0DMA          0x00000002      //
+#define ISR_TXDMA0          0x00000001      //
+
+
+//
+// Bits in the PSCFG register
+//
+#define PSCFG_PHILIPMD      0x40        //
+#define PSCFG_WAKECALEN     0x20        //
+#define PSCFG_WAKETMREN     0x10        //
+#define PSCFG_BBPSPROG      0x08        //
+#define PSCFG_WAKESYN       0x04        //
+#define PSCFG_SLEEPSYN      0x02        //
+#define PSCFG_AUTOSLEEP     0x01        //
+
+//
+// Bits in the PSCTL register
+//
+#define PSCTL_WAKEDONE      0x20        //
+#define PSCTL_PS            0x10        //
+#define PSCTL_GO2DOZE       0x08        //
+#define PSCTL_LNBCN         0x04        //
+#define PSCTL_ALBCN         0x02        //
+#define PSCTL_PSEN          0x01        //
+
+//
+// Bits in the PSPWSIG register
+//
+#define PSSIG_WPE3          0x80        //
+#define PSSIG_WPE2          0x40        //
+#define PSSIG_WPE1          0x20        //
+#define PSSIG_WRADIOPE      0x10        //
+#define PSSIG_SPE3          0x08        //
+#define PSSIG_SPE2          0x04        //
+#define PSSIG_SPE1          0x02        //
+#define PSSIG_SRADIOPE      0x01        //
+
+//
+// Bits in the BBREGCTL register
+//
+#define BBREGCTL_DONE       0x04        //
+#define BBREGCTL_REGR       0x02        //
+#define BBREGCTL_REGW       0x01        //
+
+//
+// Bits in the IFREGCTL register
+//
+#define IFREGCTL_DONE       0x04        //
+#define IFREGCTL_IFRF       0x02        //
+#define IFREGCTL_REGW       0x01        //
+
+//
+// Bits in the SOFTPWRCTL register
+//
+#define SOFTPWRCTL_RFLEOPT      0x0800  //
+#define SOFTPWRCTL_TXPEINV      0x0200  //
+#define SOFTPWRCTL_SWPECTI      0x0100  //
+#define SOFTPWRCTL_SWPAPE       0x0020  //
+#define SOFTPWRCTL_SWCALEN      0x0010  //
+#define SOFTPWRCTL_SWRADIO_PE   0x0008  //
+#define SOFTPWRCTL_SWPE2        0x0004  //
+#define SOFTPWRCTL_SWPE1        0x0002  //
+#define SOFTPWRCTL_SWPE3        0x0001  //
+
+//
+// Bits in the GPIOCTL1 register
+//
+#define GPIO1_DATA1             0x20    //
+#define GPIO1_MD1               0x10    //
+#define GPIO1_DATA0             0x02    //
+#define GPIO1_MD0               0x01    //
+
+//
+// Bits in the DMACTL register
+//
+#define DMACTL_CLRRUN       0x00080000  //
+#define DMACTL_RUN          0x00000008  //
+#define DMACTL_WAKE         0x00000004  //
+#define DMACTL_DEAD         0x00000002  //
+#define DMACTL_ACTIVE       0x00000001  //
+//
+// Bits in the RXDMACTL0 register
+//
+#define RX_PERPKT           0x00000100  //
+#define RX_PERPKTCLR        0x01000000  //
+//
+// Bits in the BCNDMACTL register
+//
+#define BEACON_READY        0x01        //
+//
+// Bits in the MISCFFCTL register
+//
+#define MISCFFCTL_WRITE     0x0001      //
+
+
+//
+// Bits in WAKEUPEN0
+//
+#define WAKEUPEN0_DIRPKT    0x10
+#define WAKEUPEN0_LINKOFF   0x08
+#define WAKEUPEN0_ATIMEN    0x04
+#define WAKEUPEN0_TIMEN     0x02
+#define WAKEUPEN0_MAGICEN   0x01
+
+//
+// Bits in WAKEUPEN1
+//
+#define WAKEUPEN1_128_3     0x08
+#define WAKEUPEN1_128_2     0x04
+#define WAKEUPEN1_128_1     0x02
+#define WAKEUPEN1_128_0     0x01
+
+//
+// Bits in WAKEUPSR0
+//
+#define WAKEUPSR0_DIRPKT    0x10
+#define WAKEUPSR0_LINKOFF   0x08
+#define WAKEUPSR0_ATIMEN    0x04
+#define WAKEUPSR0_TIMEN     0x02
+#define WAKEUPSR0_MAGICEN   0x01
+
+//
+// Bits in WAKEUPSR1
+//
+#define WAKEUPSR1_128_3     0x08
+#define WAKEUPSR1_128_2     0x04
+#define WAKEUPSR1_128_1     0x02
+#define WAKEUPSR1_128_0     0x01
+
+//
+// Bits in the MAC_REG_GPIOCTL register
+//
+#define GPIO0_MD            0x01        //
+#define GPIO0_DATA          0x02        //
+#define GPIO0_INTMD         0x04        //
+#define GPIO1_MD            0x10        //
+#define GPIO1_DATA          0x20        //
+
+
+//
+// Bits in the MSRCTL register
+//
+#define MSRCTL_FINISH       0x80
+#define MSRCTL_READY        0x40
+#define MSRCTL_RADARDETECT  0x20
+#define MSRCTL_EN           0x10
+#define MSRCTL_QUIETTXCHK   0x08
+#define MSRCTL_QUIETRPT     0x04
+#define MSRCTL_QUIETINT     0x02
+#define MSRCTL_QUIETEN      0x01
+//
+// Bits in the MSRCTL1 register
+//
+#define MSRCTL1_TXPWR       0x08
+#define MSRCTL1_CSAPAREN    0x04
+#define MSRCTL1_TXPAUSE     0x01
+
+
+// Loopback mode
+#define MAC_LB_EXT          0x02        //
+#define MAC_LB_INTERNAL     0x01        //
+#define MAC_LB_NONE         0x00        //
+
+// Ethernet address filter type
+#define PKT_TYPE_NONE           0x00    // turn off receiver
+#define PKT_TYPE_ALL_MULTICAST  0x80
+#define PKT_TYPE_PROMISCUOUS    0x40
+#define PKT_TYPE_DIRECTED       0x20    // obselete, directed address is always accepted
+#define PKT_TYPE_BROADCAST      0x10
+#define PKT_TYPE_MULTICAST      0x08
+#define PKT_TYPE_ERROR_WPA      0x04
+#define PKT_TYPE_ERROR_CRC      0x02
+#define PKT_TYPE_BSSID          0x01
+
+#define Default_BI              0x200
+
+
+// MiscFIFO Offset
+#define MISCFIFO_KEYETRY0       32
+#define MISCFIFO_KEYENTRYSIZE   22
+#define MISCFIFO_SYNINFO_IDX    10
+#define MISCFIFO_SYNDATA_IDX    11
+#define MISCFIFO_SYNDATASIZE    21
+
+// enabled mask value of irq
+#define IMR_MASK_VALUE     (IMR_SOFTTIMER1 | \
+                            IMR_RXDMA1 | \
+                            IMR_RXNOBUF | \
+                            IMR_MIBNEARFULL | \
+                            IMR_SOFTINT | \
+                            IMR_FETALERR | \
+                            IMR_WATCHDOG | \
+                            IMR_SOFTTIMER | \
+                            IMR_GPIO | \
+                            IMR_TBTT | \
+                            IMR_RXDMA0 | \
+                            IMR_BNTX | \
+                            IMR_AC0DMA | \
+                            IMR_TXDMA0)
+
+// max time out delay time
+#define W_MAX_TIMEOUT       0xFFF0U     //
+
+// wait time within loop
+#define CB_DELAY_LOOP_WAIT  10          // 10ms
+
+//
+// revision id
+//
+#define REV_ID_VT3253_A0    0x00
+#define REV_ID_VT3253_A1    0x01
+#define REV_ID_VT3253_B0    0x08
+#define REV_ID_VT3253_B1    0x09
+
+/*---------------------  Export Types  ------------------------------*/
+
+/*---------------------  Export Macros ------------------------------*/
+
+#define MACvRegBitsOn(dwIoBase, byRegOfs, byBits)           \
+{                                                           \
+    BYTE byData;                                            \
+    VNSvInPortB(dwIoBase + byRegOfs, &byData);              \
+    VNSvOutPortB(dwIoBase + byRegOfs, byData | (byBits));   \
+}
+
+#define MACvWordRegBitsOn(dwIoBase, byRegOfs, wBits)        \
+{                                                           \
+    WORD wData;                                             \
+    VNSvInPortW(dwIoBase + byRegOfs, &wData);               \
+    VNSvOutPortW(dwIoBase + byRegOfs, wData | (wBits));     \
+}
+
+#define MACvDWordRegBitsOn(dwIoBase, byRegOfs, dwBits)      \
+{                                                           \
+    DWORD dwData;                                           \
+    VNSvInPortD(dwIoBase + byRegOfs, &dwData);              \
+    VNSvOutPortD(dwIoBase + byRegOfs, dwData | (dwBits));   \
+}
+
+#define MACvRegBitsOnEx(dwIoBase, byRegOfs, byMask, byBits) \
+{                                                           \
+    BYTE byData;                                            \
+    VNSvInPortB(dwIoBase + byRegOfs, &byData);              \
+    byData &= byMask;                                       \
+    VNSvOutPortB(dwIoBase + byRegOfs, byData | (byBits));   \
+}
+
+#define MACvRegBitsOff(dwIoBase, byRegOfs, byBits)          \
+{                                                           \
+    BYTE byData;                                            \
+    VNSvInPortB(dwIoBase + byRegOfs, &byData);              \
+    VNSvOutPortB(dwIoBase + byRegOfs, byData & ~(byBits));  \
+}
+
+#define MACvWordRegBitsOff(dwIoBase, byRegOfs, wBits)       \
+{                                                           \
+    WORD wData;                                             \
+    VNSvInPortW(dwIoBase + byRegOfs, &wData);               \
+    VNSvOutPortW(dwIoBase + byRegOfs, wData & ~(wBits));    \
+}
+
+#define MACvDWordRegBitsOff(dwIoBase, byRegOfs, dwBits)     \
+{                                                           \
+    DWORD dwData;                                           \
+    VNSvInPortD(dwIoBase + byRegOfs, &dwData);              \
+    VNSvOutPortD(dwIoBase + byRegOfs, dwData & ~(dwBits));  \
+}
+
+#define MACvGetCurrRx0DescAddr(dwIoBase, pdwCurrDescAddr)    \
+{                                                           \
+    VNSvInPortD(dwIoBase + MAC_REG_RXDMAPTR0,               \
+                (PDWORD)pdwCurrDescAddr);                   \
+}
+
+#define MACvGetCurrRx1DescAddr(dwIoBase, pdwCurrDescAddr)   \
+{                                                           \
+    VNSvInPortD(dwIoBase + MAC_REG_RXDMAPTR1,               \
+                (PDWORD)pdwCurrDescAddr);                   \
+}
+
+#define MACvGetCurrTx0DescAddr(dwIoBase, pdwCurrDescAddr)   \
+{                                                           \
+    VNSvInPortD(dwIoBase + MAC_REG_TXDMAPTR0,               \
+                (PDWORD)pdwCurrDescAddr);                   \
+}
+
+#define MACvGetCurrAC0DescAddr(dwIoBase, pdwCurrDescAddr)   \
+{                                                           \
+    VNSvInPortD(dwIoBase + MAC_REG_AC0DMAPTR,               \
+                (PDWORD)pdwCurrDescAddr);                   \
+}
+
+#define MACvGetCurrSyncDescAddr(dwIoBase, pdwCurrDescAddr)  \
+{                                                           \
+    VNSvInPortD(dwIoBase + MAC_REG_SYNCDMAPTR,              \
+                (PDWORD)pdwCurrDescAddr);                   \
+}
+
+#define MACvGetCurrATIMDescAddr(dwIoBase, pdwCurrDescAddr)  \
+{                                                           \
+    VNSvInPortD(dwIoBase + MAC_REG_ATIMDMAPTR,              \
+                (PDWORD)pdwCurrDescAddr);                   \
+}                                                           \
+
+// set the chip with current BCN tx descriptor address
+#define MACvSetCurrBCNTxDescAddr(dwIoBase, dwCurrDescAddr)  \
+{                                                           \
+    VNSvOutPortD(dwIoBase + MAC_REG_BCNDMAPTR,              \
+                 dwCurrDescAddr);                           \
+}
+
+// set the chip with current BCN length
+#define MACvSetCurrBCNLength(dwIoBase, wCurrBCNLength)     \
+{                                                          \
+    VNSvOutPortW(dwIoBase + MAC_REG_BCNDMACTL+2,           \
+                 wCurrBCNLength);                          \
+}
+
+#define MACvReadBSSIDAddress(dwIoBase, pbyEtherAddr)        \
+{                                                           \
+    VNSvOutPortB(dwIoBase + MAC_REG_PAGE1SEL, 1);           \
+    VNSvInPortB(dwIoBase + MAC_REG_BSSID0,                  \
+                (PBYTE)pbyEtherAddr);                       \
+    VNSvInPortB(dwIoBase + MAC_REG_BSSID0 + 1,              \
+                pbyEtherAddr + 1);                          \
+    VNSvInPortB(dwIoBase + MAC_REG_BSSID0 + 2,              \
+                pbyEtherAddr + 2);                          \
+    VNSvInPortB(dwIoBase + MAC_REG_BSSID0 + 3,              \
+                pbyEtherAddr + 3);                          \
+    VNSvInPortB(dwIoBase + MAC_REG_BSSID0 + 4,              \
+                pbyEtherAddr + 4);                          \
+    VNSvInPortB(dwIoBase + MAC_REG_BSSID0 + 5,              \
+                pbyEtherAddr + 5);                          \
+    VNSvOutPortB(dwIoBase + MAC_REG_PAGE1SEL, 0);           \
+}
+
+#define MACvWriteBSSIDAddress(dwIoBase, pbyEtherAddr)       \
+{                                                           \
+    VNSvOutPortB(dwIoBase + MAC_REG_PAGE1SEL, 1);           \
+    VNSvOutPortB(dwIoBase + MAC_REG_BSSID0,                 \
+                *(pbyEtherAddr));                           \
+    VNSvOutPortB(dwIoBase + MAC_REG_BSSID0 + 1,             \
+                *(pbyEtherAddr + 1));                       \
+    VNSvOutPortB(dwIoBase + MAC_REG_BSSID0 + 2,             \
+                *(pbyEtherAddr + 2));                       \
+    VNSvOutPortB(dwIoBase + MAC_REG_BSSID0 + 3,             \
+                *(pbyEtherAddr + 3));                       \
+    VNSvOutPortB(dwIoBase + MAC_REG_BSSID0 + 4,             \
+                *(pbyEtherAddr + 4));                       \
+    VNSvOutPortB(dwIoBase + MAC_REG_BSSID0 + 5,             \
+                *(pbyEtherAddr + 5));                       \
+    VNSvOutPortB(dwIoBase + MAC_REG_PAGE1SEL, 0);           \
+}
+
+#define MACvReadEtherAddress(dwIoBase, pbyEtherAddr)        \
+{                                                           \
+    VNSvOutPortB(dwIoBase + MAC_REG_PAGE1SEL, 1);           \
+    VNSvInPortB(dwIoBase + MAC_REG_PAR0,                    \
+                (PBYTE)pbyEtherAddr);                       \
+    VNSvInPortB(dwIoBase + MAC_REG_PAR0 + 1,                \
+                pbyEtherAddr + 1);                          \
+    VNSvInPortB(dwIoBase + MAC_REG_PAR0 + 2,                \
+                pbyEtherAddr + 2);                          \
+    VNSvInPortB(dwIoBase + MAC_REG_PAR0 + 3,                \
+                pbyEtherAddr + 3);                          \
+    VNSvInPortB(dwIoBase + MAC_REG_PAR0 + 4,                \
+                pbyEtherAddr + 4);                          \
+    VNSvInPortB(dwIoBase + MAC_REG_PAR0 + 5,                \
+                pbyEtherAddr + 5);                          \
+    VNSvOutPortB(dwIoBase + MAC_REG_PAGE1SEL, 0);           \
+}
+
+
+#define MACvWriteEtherAddress(dwIoBase, pbyEtherAddr)       \
+{                                                           \
+    VNSvOutPortB(dwIoBase + MAC_REG_PAGE1SEL, 1);           \
+    VNSvOutPortB(dwIoBase + MAC_REG_PAR0,                   \
+                *pbyEtherAddr);                             \
+    VNSvOutPortB(dwIoBase + MAC_REG_PAR0 + 1,               \
+                *(pbyEtherAddr + 1));                       \
+    VNSvOutPortB(dwIoBase + MAC_REG_PAR0 + 2,               \
+                *(pbyEtherAddr + 2));                       \
+    VNSvOutPortB(dwIoBase + MAC_REG_PAR0 + 3,               \
+                *(pbyEtherAddr + 3));                       \
+    VNSvOutPortB(dwIoBase + MAC_REG_PAR0 + 4,               \
+                *(pbyEtherAddr + 4));                       \
+    VNSvOutPortB(dwIoBase + MAC_REG_PAR0 + 5,               \
+                *(pbyEtherAddr + 5));                       \
+    VNSvOutPortB(dwIoBase + MAC_REG_PAGE1SEL, 0);           \
+}
+
+
+#define MACvClearISR(dwIoBase)                              \
+{                                                           \
+    VNSvOutPortD(dwIoBase + MAC_REG_ISR, IMR_MASK_VALUE);   \
+}
+
+#define MACvStart(dwIoBase)                                      \
+{                                                                \
+    VNSvOutPortB(dwIoBase + MAC_REG_HOSTCR,                      \
+                    (HOSTCR_MACEN | HOSTCR_RXON | HOSTCR_TXON)); \
+}
+
+#define MACvRx0PerPktMode(dwIoBase)                         \
+{                                                           \
+    VNSvOutPortD(dwIoBase + MAC_REG_RXDMACTL0, RX_PERPKT);  \
+}
+
+#define MACvRx0BufferFillMode(dwIoBase)                         \
+{                                                               \
+    VNSvOutPortD(dwIoBase + MAC_REG_RXDMACTL0, RX_PERPKTCLR);   \
+}
+
+#define MACvRx1PerPktMode(dwIoBase)                         \
+{                                                           \
+    VNSvOutPortD(dwIoBase + MAC_REG_RXDMACTL1, RX_PERPKT);  \
+}
+
+#define MACvRx1BufferFillMode(dwIoBase)                         \
+{                                                               \
+    VNSvOutPortD(dwIoBase + MAC_REG_RXDMACTL1, RX_PERPKTCLR);   \
+}
+
+#define MACvRxOn(dwIoBase)                                      \
+{                                                               \
+    MACvRegBitsOn(dwIoBase, MAC_REG_HOSTCR, HOSTCR_RXON);       \
+}
+
+#define MACvReceive0(dwIoBase)                                  \
+{                                                               \
+    DWORD dwData;                                               \
+    VNSvInPortD(dwIoBase + MAC_REG_RXDMACTL0, &dwData);         \
+    if (dwData & DMACTL_RUN) {                                  \
+        VNSvOutPortD(dwIoBase + MAC_REG_RXDMACTL0, DMACTL_WAKE);\
+    }                                                           \
+    else {                                                      \
+        VNSvOutPortD(dwIoBase + MAC_REG_RXDMACTL0, DMACTL_RUN); \
+    }                                                           \
+}
+
+#define MACvReceive1(dwIoBase)                                  \
+{                                                               \
+    DWORD dwData;                                                \
+    VNSvInPortD(dwIoBase + MAC_REG_RXDMACTL1, &dwData);         \
+    if (dwData & DMACTL_RUN) {                                  \
+        VNSvOutPortD(dwIoBase + MAC_REG_RXDMACTL1, DMACTL_WAKE);\
+    }                                                           \
+    else {                                                      \
+        VNSvOutPortD(dwIoBase + MAC_REG_RXDMACTL1, DMACTL_RUN); \
+    }                                                           \
+}
+
+#define MACvTxOn(dwIoBase)                                      \
+{                                                               \
+    MACvRegBitsOn(dwIoBase, MAC_REG_HOSTCR, HOSTCR_TXON);       \
+}
+
+#define MACvTransmit0(dwIoBase)                                 \
+{                                                               \
+    DWORD dwData;                                                \
+    VNSvInPortD(dwIoBase + MAC_REG_TXDMACTL0, &dwData);         \
+    if (dwData & DMACTL_RUN) {                                  \
+        VNSvOutPortD(dwIoBase + MAC_REG_TXDMACTL0, DMACTL_WAKE);\
+    }                                                           \
+    else {                                                      \
+        VNSvOutPortD(dwIoBase + MAC_REG_TXDMACTL0, DMACTL_RUN); \
+    }                                                           \
+}
+
+#define MACvTransmitAC0(dwIoBase)                               \
+{                                                               \
+    DWORD dwData;                                                \
+    VNSvInPortD(dwIoBase + MAC_REG_AC0DMACTL, &dwData);         \
+    if (dwData & DMACTL_RUN) {                                  \
+        VNSvOutPortD(dwIoBase + MAC_REG_AC0DMACTL, DMACTL_WAKE);\
+    }                                                           \
+    else {                                                      \
+        VNSvOutPortD(dwIoBase + MAC_REG_AC0DMACTL, DMACTL_RUN); \
+    }                                                           \
+}
+
+#define MACvTransmitSYNC(dwIoBase)                               \
+{                                                                \
+    DWORD dwData;                                                 \
+    VNSvInPortD(dwIoBase + MAC_REG_SYNCDMACTL, &dwData);         \
+    if (dwData & DMACTL_RUN) {                                   \
+        VNSvOutPortD(dwIoBase + MAC_REG_SYNCDMACTL, DMACTL_WAKE);\
+    }                                                            \
+    else {                                                       \
+        VNSvOutPortD(dwIoBase + MAC_REG_SYNCDMACTL, DMACTL_RUN); \
+    }                                                            \
+}
+
+#define MACvTransmitATIM(dwIoBase)                               \
+{                                                                \
+    DWORD dwData;                                                 \
+    VNSvInPortD(dwIoBase + MAC_REG_ATIMDMACTL, &dwData);         \
+    if (dwData & DMACTL_RUN) {                                   \
+        VNSvOutPortD(dwIoBase + MAC_REG_ATIMDMACTL, DMACTL_WAKE);\
+    }                                                            \
+    else {                                                       \
+        VNSvOutPortD(dwIoBase + MAC_REG_ATIMDMACTL, DMACTL_RUN); \
+    }                                                            \
+}
+
+#define MACvTransmitBCN(dwIoBase)                               \
+{                                                               \
+    VNSvOutPortB(dwIoBase + MAC_REG_BCNDMACTL, BEACON_READY);   \
+}
+
+#define MACvClearStckDS(dwIoBase)                           \
+{                                                           \
+    BYTE byOrgValue;                                        \
+    VNSvInPortB(dwIoBase + MAC_REG_STICKHW, &byOrgValue);   \
+    byOrgValue = byOrgValue & 0xFC;                         \
+    VNSvOutPortB(dwIoBase + MAC_REG_STICKHW, byOrgValue);   \
+}
+
+#define MACvReadISR(dwIoBase, pdwValue)             \
+{                                                   \
+    VNSvInPortD(dwIoBase + MAC_REG_ISR, pdwValue);  \
+}
+
+#define MACvWriteISR(dwIoBase, dwValue)             \
+{                                                   \
+    VNSvOutPortD(dwIoBase + MAC_REG_ISR, dwValue);  \
+}
+
+#define MACvIntEnable(dwIoBase, dwMask)             \
+{                                                   \
+    VNSvOutPortD(dwIoBase + MAC_REG_IMR, dwMask);   \
+}
+
+#define MACvIntDisable(dwIoBase)                    \
+{                                                   \
+    VNSvOutPortD(dwIoBase + MAC_REG_IMR, 0);        \
+}
+
+#define MACvSelectPage0(dwIoBase)                   \
+{                                                   \
+    VNSvOutPortB(dwIoBase + MAC_REG_PAGE1SEL, 0);   \
+}
+#define MACvSelectPage1(dwIoBase)                   \
+{                                                   \
+    VNSvOutPortB(dwIoBase + MAC_REG_PAGE1SEL, 1);   \
+}
+
+#define MACvReadMIBCounter(dwIoBase, pdwCounter)            \
+{                                                           \
+    VNSvInPortD(dwIoBase + MAC_REG_MIBCNTR , pdwCounter);   \
+}
+
+#define MACvPwrEvntDisable(dwIoBase)                    \
+{                                                       \
+    VNSvOutPortW(dwIoBase + MAC_REG_WAKEUPEN0, 0x0000); \
+}
+
+#define MACvEnableProtectMD(dwIoBase)                    \
+{                                                        \
+    DWORD dwOrgValue;                                    \
+    VNSvInPortD(dwIoBase + MAC_REG_ENCFG , &dwOrgValue); \
+    dwOrgValue = dwOrgValue | EnCFG_ProtectMd;           \
+    VNSvOutPortD(dwIoBase + MAC_REG_ENCFG, dwOrgValue);  \
+}
+
+#define MACvDisableProtectMD(dwIoBase)                   \
+{                                                        \
+    DWORD dwOrgValue;                                     \
+    VNSvInPortD(dwIoBase + MAC_REG_ENCFG , &dwOrgValue); \
+    dwOrgValue = dwOrgValue & ~EnCFG_ProtectMd;          \
+    VNSvOutPortD(dwIoBase + MAC_REG_ENCFG, dwOrgValue);  \
+}
+
+#define MACvEnableBarkerPreambleMd(dwIoBase)             \
+{                                                        \
+    DWORD dwOrgValue;                                    \
+    VNSvInPortD(dwIoBase + MAC_REG_ENCFG , &dwOrgValue); \
+    dwOrgValue = dwOrgValue | EnCFG_BarkerPream;         \
+    VNSvOutPortD(dwIoBase + MAC_REG_ENCFG, dwOrgValue);  \
+}
+
+#define MACvDisableBarkerPreambleMd(dwIoBase)            \
+{                                                        \
+    DWORD dwOrgValue;                                    \
+    VNSvInPortD(dwIoBase + MAC_REG_ENCFG , &dwOrgValue); \
+    dwOrgValue = dwOrgValue & ~EnCFG_BarkerPream;        \
+    VNSvOutPortD(dwIoBase + MAC_REG_ENCFG, dwOrgValue);  \
+}
+
+#define MACvSetBBType(dwIoBase, byTyp)                   \
+{                                                        \
+    DWORD dwOrgValue;                                    \
+    VNSvInPortD(dwIoBase + MAC_REG_ENCFG , &dwOrgValue); \
+    dwOrgValue = dwOrgValue & ~EnCFG_BBType_MASK;        \
+    dwOrgValue = dwOrgValue | (DWORD) byTyp;             \
+    VNSvOutPortD(dwIoBase + MAC_REG_ENCFG, dwOrgValue);  \
+}
+
+#define MACvReadATIMW(dwIoBase, pwCounter)                 \
+{                                                          \
+    VNSvInPortW(dwIoBase + MAC_REG_AIDATIM , pwCounter);   \
+}
+
+#define MACvWriteATIMW(dwIoBase, wCounter)                 \
+{                                                          \
+    VNSvOutPortW(dwIoBase + MAC_REG_AIDATIM , wCounter);   \
+}
+
+#define MACvWriteCRC16_128(dwIoBase, byRegOfs, wCRC)       \
+{                                                          \
+    VNSvOutPortB(dwIoBase + MAC_REG_PAGE1SEL, 1);          \
+    VNSvOutPortW(dwIoBase + byRegOfs, wCRC);               \
+    VNSvOutPortB(dwIoBase + MAC_REG_PAGE1SEL, 0);          \
+}
+
+#define MACvGPIOIn(dwIoBase, pbyValue)                      \
+{                                                           \
+    VNSvInPortB(dwIoBase + MAC_REG_GPIOCTL1, pbyValue);     \
+}
+
+#define MACvSetRFLE_LatchBase(dwIoBase)                                 \
+{                                                                        \
+    MACvWordRegBitsOn(dwIoBase, MAC_REG_SOFTPWRCTL, SOFTPWRCTL_RFLEOPT); \
+}
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+#ifdef __cplusplus
+extern "C" {                            /* Assume C declarations for C++ */
+#endif /* __cplusplus */
+
+extern WORD TxRate_iwconfig;//2008-5-8 <add> by chester
+VOID MACvReadAllRegs(DWORD_PTR dwIoBase, PBYTE pbyMacRegs);
+
+BOOL MACbIsRegBitsOn(DWORD_PTR dwIoBase, BYTE byRegOfs, BYTE byTestBits);
+BOOL MACbIsRegBitsOff(DWORD_PTR dwIoBase, BYTE byRegOfs, BYTE byTestBits);
+
+BOOL MACbIsIntDisable(DWORD_PTR dwIoBase);
+
+BYTE MACbyReadMultiAddr(DWORD_PTR dwIoBase, UINT uByteIdx);
+VOID MACvWriteMultiAddr(DWORD_PTR dwIoBase, UINT uByteIdx, BYTE byData);
+VOID MACvSetMultiAddrByHash(DWORD_PTR dwIoBase, BYTE byHashIdx);
+VOID MACvResetMultiAddrByHash(DWORD_PTR dwIoBase, BYTE byHashIdx);
+
+VOID MACvSetRxThreshold(DWORD_PTR dwIoBase, BYTE byThreshold);
+VOID MACvGetRxThreshold(DWORD_PTR dwIoBase, PBYTE pbyThreshold);
+
+VOID MACvSetTxThreshold(DWORD_PTR dwIoBase, BYTE byThreshold);
+VOID MACvGetTxThreshold(DWORD_PTR dwIoBase, PBYTE pbyThreshold);
+
+VOID MACvSetDmaLength(DWORD_PTR dwIoBase, BYTE byDmaLength);
+VOID MACvGetDmaLength(DWORD_PTR dwIoBase, PBYTE pbyDmaLength);
+
+VOID MACvSetShortRetryLimit(DWORD_PTR dwIoBase, BYTE byRetryLimit);
+VOID MACvGetShortRetryLimit(DWORD_PTR dwIoBase, PBYTE pbyRetryLimit);
+
+VOID MACvSetLongRetryLimit(DWORD_PTR dwIoBase, BYTE byRetryLimit);
+VOID MACvGetLongRetryLimit(DWORD_PTR dwIoBase, PBYTE pbyRetryLimit);
+
+VOID MACvSetLoopbackMode(DWORD_PTR dwIoBase, BYTE byLoopbackMode);
+BOOL MACbIsInLoopbackMode(DWORD_PTR dwIoBase);
+
+VOID MACvSetPacketFilter(DWORD_PTR dwIoBase, WORD wFilterType);
+
+VOID MACvSaveContext(DWORD_PTR dwIoBase, PBYTE pbyCxtBuf);
+VOID MACvRestoreContext(DWORD_PTR dwIoBase, PBYTE pbyCxtBuf);
+BOOL MACbCompareContext(DWORD_PTR dwIoBase, PBYTE pbyCxtBuf);
+
+BOOL MACbSoftwareReset(DWORD_PTR dwIoBase);
+BOOL MACbSafeSoftwareReset(DWORD_PTR dwIoBase);
+BOOL MACbSafeRxOff(DWORD_PTR dwIoBase);
+BOOL MACbSafeTxOff(DWORD_PTR dwIoBase);
+BOOL MACbSafeStop(DWORD_PTR dwIoBase);
+BOOL MACbShutdown(DWORD_PTR dwIoBase);
+VOID MACvInitialize(DWORD_PTR dwIoBase);
+VOID MACvSetCurrRx0DescAddr(DWORD_PTR dwIoBase, DWORD dwCurrDescAddr);
+VOID MACvSetCurrRx1DescAddr(DWORD_PTR dwIoBase, DWORD dwCurrDescAddr);
+VOID MACvSetCurrTXDescAddr(int iTxType, DWORD_PTR dwIoBase, DWORD dwCurrDescAddr);
+VOID MACvSetCurrTx0DescAddrEx(DWORD_PTR dwIoBase, DWORD dwCurrDescAddr);
+VOID MACvSetCurrAC0DescAddrEx(DWORD_PTR dwIoBase, DWORD dwCurrDescAddr);
+VOID MACvSetCurrSyncDescAddrEx(DWORD_PTR dwIoBase, DWORD dwCurrDescAddr);
+VOID MACvSetCurrATIMDescAddrEx(DWORD_PTR dwIoBase, DWORD dwCurrDescAddr);
+void MACvTimer0MicroSDelay(DWORD_PTR dwIoBase, UINT uDelay);
+void MACvOneShotTimer0MicroSec(DWORD_PTR dwIoBase, UINT uDelayTime);
+void MACvOneShotTimer1MicroSec(DWORD_PTR dwIoBase, UINT uDelayTime);
+
+void MACvSetMISCFifo(DWORD_PTR dwIoBase, WORD wOffset, DWORD dwData);
+
+BOOL MACbTxDMAOff (DWORD_PTR dwIoBase, UINT idx);
+
+void MACvClearBusSusInd(DWORD_PTR dwIoBase);
+void MACvEnableBusSusEn(DWORD_PTR dwIoBase);
+
+BOOL MACbFlushSYNCFifo(DWORD_PTR dwIoBase);
+BOOL MACbPSWakeup(DWORD_PTR dwIoBase);
+
+void MACvSetKeyEntry(DWORD_PTR dwIoBase, WORD wKeyCtl, UINT uEntryIdx, UINT uKeyIdx, PBYTE pbyAddr, PDWORD pdwKey, BYTE byLocalID);
+void MACvDisableKeyEntry(DWORD_PTR dwIoBase, UINT uEntryIdx);
+void MACvSetDefaultKeyEntry(DWORD_PTR dwIoBase, UINT uKeyLen, UINT uKeyIdx, PDWORD pdwKey, BYTE byLocalID);
+//void MACvEnableDefaultKey(DWORD_PTR dwIoBase, BYTE byLocalID);
+void MACvDisableDefaultKey(DWORD_PTR dwIoBase);
+void MACvSetDefaultTKIPKeyEntry(DWORD_PTR dwIoBase, UINT uKeyLen, UINT uKeyIdx, PDWORD pdwKey, BYTE byLocalID);
+void MACvSetDefaultKeyCtl(DWORD_PTR dwIoBase, WORD wKeyCtl, UINT uEntryIdx, BYTE byLocalID);
+
+#ifdef __cplusplus
+}                                       /* End of extern "C" { */
+#endif /* __cplusplus */
+
+#endif // __MAC_H__
+
diff --git a/drivers/staging/vt6655/mib.c b/drivers/staging/vt6655/mib.c
new file mode 100644
index 00000000000..3f06de141a8
--- /dev/null
+++ b/drivers/staging/vt6655/mib.c
@@ -0,0 +1,616 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: mib.c
+ *
+ * Purpose: Implement MIB Data Structure
+ *
+ * Author: Tevin Chen
+ *
+ * Date: May 21, 1996
+ *
+ * Functions:
+ *      STAvClearAllCounter - Clear All MIB Counter
+ *      STAvUpdateIstStatCounter - Update ISR statistic counter
+ *      STAvUpdateRDStatCounter - Update Rx statistic counter
+ *      STAvUpdateRDStatCounterEx - Update Rx statistic counter and copy rcv data
+ *      STAvUpdateTDStatCounter - Update Tx statistic counter
+ *      STAvUpdateTDStatCounterEx - Update Tx statistic counter and copy tx data
+ *      STAvUpdate802_11Counter - Update 802.11 mib counter
+ *
+ * Revision History:
+ *
+ */
+
+
+#if !defined(__UPC_H__)
+#include "upc.h"
+#endif
+#if !defined(__MAC_H__)
+#include "mac.h"
+#endif
+#if !defined(__TBIT_H__)
+#include "tbit.h"
+#endif
+#if !defined(__TETHER_H__)
+#include "tether.h"
+#endif
+#if !defined(__MIB_H__)
+#include "mib.h"
+#endif
+#if !defined(__WCTL_H__)
+#include "wctl.h"
+#endif
+#if !defined(__UMEM_H__)
+#include "umem.h"
+#endif
+#if !defined(__BASEBAND_H__)
+#include "baseband.h"
+#endif
+
+/*---------------------  Static Definitions -------------------------*/
+static int          msglevel                =MSG_LEVEL_INFO;
+/*---------------------  Static Classes  ----------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+
+/*---------------------  Static Functions  --------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+
+
+
+/*
+ * Description: Clear All Statistic Counter
+ *
+ * Parameters:
+ *  In:
+ *      pStatistic  - Pointer to Statistic Counter Data Structure
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void STAvClearAllCounter (PSStatCounter pStatistic)
+{
+    // set memory to zero
+    ZERO_MEMORY(pStatistic, sizeof(SStatCounter));
+}
+
+
+/*
+ * Description: Update Isr Statistic Counter
+ *
+ * Parameters:
+ *  In:
+ *      pStatistic  - Pointer to Statistic Counter Data Structure
+ *      wisr        - Interrupt status
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void STAvUpdateIsrStatCounter (PSStatCounter pStatistic, DWORD dwIsr)
+{
+    /**********************/
+    /* ABNORMAL interrupt */
+    /**********************/
+    // not any IMR bit invoke irq
+
+    if (dwIsr == 0) {
+        pStatistic->ISRStat.dwIsrUnknown++;
+        return;
+    }
+
+//Added by Kyle
+    if (BITbIsBitOn(dwIsr, ISR_TXDMA0))               // ISR, bit0
+        pStatistic->ISRStat.dwIsrTx0OK++;             // TXDMA0 successful
+
+    if (BITbIsBitOn(dwIsr, ISR_AC0DMA))               // ISR, bit1
+        pStatistic->ISRStat.dwIsrAC0TxOK++;           // AC0DMA successful
+
+    if (BITbIsBitOn(dwIsr, ISR_BNTX))                 // ISR, bit2
+        pStatistic->ISRStat.dwIsrBeaconTxOK++;        // BeaconTx successful
+
+    if (BITbIsBitOn(dwIsr, ISR_RXDMA0))               // ISR, bit3
+        pStatistic->ISRStat.dwIsrRx0OK++;             // Rx0 successful
+
+    if (BITbIsBitOn(dwIsr, ISR_TBTT))                 // ISR, bit4
+        pStatistic->ISRStat.dwIsrTBTTInt++;           // TBTT successful
+
+    if (BITbIsBitOn(dwIsr, ISR_SOFTTIMER))            // ISR, bit6
+        pStatistic->ISRStat.dwIsrSTIMERInt++;
+
+    if (BITbIsBitOn(dwIsr, ISR_WATCHDOG))             // ISR, bit7
+        pStatistic->ISRStat.dwIsrWatchDog++;
+
+    if (BITbIsBitOn(dwIsr, ISR_FETALERR))             // ISR, bit8
+        pStatistic->ISRStat.dwIsrUnrecoverableError++;
+
+    if (BITbIsBitOn(dwIsr, ISR_SOFTINT))              // ISR, bit9
+        pStatistic->ISRStat.dwIsrSoftInterrupt++;     // software interrupt
+
+    if (BITbIsBitOn(dwIsr, ISR_MIBNEARFULL))          // ISR, bit10
+        pStatistic->ISRStat.dwIsrMIBNearfull++;
+
+    if (BITbIsBitOn(dwIsr, ISR_RXNOBUF))              // ISR, bit11
+        pStatistic->ISRStat.dwIsrRxNoBuf++;           // Rx No Buff
+
+    if (BITbIsBitOn(dwIsr, ISR_RXDMA1))               // ISR, bit12
+        pStatistic->ISRStat.dwIsrRx1OK++;             // Rx1 successful
+
+//    if (BITbIsBitOn(dwIsr, ISR_ATIMTX))               // ISR, bit13
+//        pStatistic->ISRStat.dwIsrATIMTxOK++;          // ATIMTX successful
+
+//    if (BITbIsBitOn(dwIsr, ISR_SYNCTX))               // ISR, bit14
+//        pStatistic->ISRStat.dwIsrSYNCTxOK++;          // SYNCTX successful
+
+//    if (BITbIsBitOn(dwIsr, ISR_CFPEND))               // ISR, bit18
+//        pStatistic->ISRStat.dwIsrCFPEnd++;
+
+//    if (BITbIsBitOn(dwIsr, ISR_ATIMEND))              // ISR, bit19
+//        pStatistic->ISRStat.dwIsrATIMEnd++;
+
+//    if (BITbIsBitOn(dwIsr, ISR_SYNCFLUSHOK))          // ISR, bit20
+//        pStatistic->ISRStat.dwIsrSYNCFlushOK++;
+
+    if (BITbIsBitOn(dwIsr, ISR_SOFTTIMER1))           // ISR, bit21
+        pStatistic->ISRStat.dwIsrSTIMER1Int++;
+
+}
+
+
+/*
+ * Description: Update Rx Statistic Counter
+ *
+ * Parameters:
+ *  In:
+ *      pStatistic      - Pointer to Statistic Counter Data Structure
+ *      byRSR           - Rx Status
+ *      byNewRSR        - Rx Status
+ *      pbyBuffer       - Rx Buffer
+ *      cbFrameLength   - Rx Length
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void STAvUpdateRDStatCounter (PSStatCounter pStatistic,
+                              BYTE byRSR, BYTE byNewRSR, BYTE byRxRate,
+                              PBYTE pbyBuffer, UINT cbFrameLength)
+{
+    //need change
+    PS802_11Header pHeader = (PS802_11Header)pbyBuffer;
+
+    if (BITbIsBitOn(byRSR, RSR_ADDROK))
+        pStatistic->dwRsrADDROk++;
+    if (BITbIsBitOn(byRSR, RSR_CRCOK)) {
+        pStatistic->dwRsrCRCOk++;
+
+        pStatistic->ullRsrOK++;
+
+        if (cbFrameLength >= U_ETHER_ADDR_LEN) {
+            // update counters in case that successful transmit
+            if (BITbIsBitOn(byRSR, RSR_ADDRBROAD)) {
+                pStatistic->ullRxBroadcastFrames++;
+                pStatistic->ullRxBroadcastBytes += (ULONGLONG)cbFrameLength;
+            }
+            else if (BITbIsBitOn(byRSR, RSR_ADDRMULTI)) {
+                pStatistic->ullRxMulticastFrames++;
+                pStatistic->ullRxMulticastBytes += (ULONGLONG)cbFrameLength;
+            }
+            else {
+                pStatistic->ullRxDirectedFrames++;
+                pStatistic->ullRxDirectedBytes += (ULONGLONG)cbFrameLength;
+            }
+        }
+    }
+
+    if(byRxRate==22) {
+        pStatistic->CustomStat.ullRsr11M++;
+        if(BITbIsBitOn(byRSR, RSR_CRCOK)) {
+            pStatistic->CustomStat.ullRsr11MCRCOk++;
+        }
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"11M: ALL[%d], OK[%d]:[%02x]\n", (INT)pStatistic->CustomStat.ullRsr11M, (INT)pStatistic->CustomStat.ullRsr11MCRCOk, byRSR);
+    }
+    else if(byRxRate==11) {
+        pStatistic->CustomStat.ullRsr5M++;
+        if(BITbIsBitOn(byRSR, RSR_CRCOK)) {
+            pStatistic->CustomStat.ullRsr5MCRCOk++;
+        }
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" 5M: ALL[%d], OK[%d]:[%02x]\n", (INT)pStatistic->CustomStat.ullRsr5M, (INT)pStatistic->CustomStat.ullRsr5MCRCOk, byRSR);
+    }
+    else if(byRxRate==4) {
+        pStatistic->CustomStat.ullRsr2M++;
+        if(BITbIsBitOn(byRSR, RSR_CRCOK)) {
+            pStatistic->CustomStat.ullRsr2MCRCOk++;
+        }
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" 2M: ALL[%d], OK[%d]:[%02x]\n", (INT)pStatistic->CustomStat.ullRsr2M, (INT)pStatistic->CustomStat.ullRsr2MCRCOk, byRSR);
+    }
+    else if(byRxRate==2){
+        pStatistic->CustomStat.ullRsr1M++;
+        if(BITbIsBitOn(byRSR, RSR_CRCOK)) {
+            pStatistic->CustomStat.ullRsr1MCRCOk++;
+        }
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" 1M: ALL[%d], OK[%d]:[%02x]\n", (INT)pStatistic->CustomStat.ullRsr1M, (INT)pStatistic->CustomStat.ullRsr1MCRCOk, byRSR);
+    }
+    else if(byRxRate==12){
+        pStatistic->CustomStat.ullRsr6M++;
+        if(BITbIsBitOn(byRSR, RSR_CRCOK)) {
+            pStatistic->CustomStat.ullRsr6MCRCOk++;
+        }
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" 6M: ALL[%d], OK[%d]\n", (INT)pStatistic->CustomStat.ullRsr6M, (INT)pStatistic->CustomStat.ullRsr6MCRCOk);
+    }
+    else if(byRxRate==18){
+        pStatistic->CustomStat.ullRsr9M++;
+        if(BITbIsBitOn(byRSR, RSR_CRCOK)) {
+            pStatistic->CustomStat.ullRsr9MCRCOk++;
+        }
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" 9M: ALL[%d], OK[%d]\n", (INT)pStatistic->CustomStat.ullRsr9M, (INT)pStatistic->CustomStat.ullRsr9MCRCOk);
+    }
+    else if(byRxRate==24){
+        pStatistic->CustomStat.ullRsr12M++;
+        if(BITbIsBitOn(byRSR, RSR_CRCOK)) {
+            pStatistic->CustomStat.ullRsr12MCRCOk++;
+        }
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"12M: ALL[%d], OK[%d]\n", (INT)pStatistic->CustomStat.ullRsr12M, (INT)pStatistic->CustomStat.ullRsr12MCRCOk);
+    }
+    else if(byRxRate==36){
+        pStatistic->CustomStat.ullRsr18M++;
+        if(BITbIsBitOn(byRSR, RSR_CRCOK)) {
+            pStatistic->CustomStat.ullRsr18MCRCOk++;
+        }
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"18M: ALL[%d], OK[%d]\n", (INT)pStatistic->CustomStat.ullRsr18M, (INT)pStatistic->CustomStat.ullRsr18MCRCOk);
+    }
+    else if(byRxRate==48){
+        pStatistic->CustomStat.ullRsr24M++;
+        if(BITbIsBitOn(byRSR, RSR_CRCOK)) {
+            pStatistic->CustomStat.ullRsr24MCRCOk++;
+        }
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"24M: ALL[%d], OK[%d]\n", (INT)pStatistic->CustomStat.ullRsr24M, (INT)pStatistic->CustomStat.ullRsr24MCRCOk);
+    }
+    else if(byRxRate==72){
+        pStatistic->CustomStat.ullRsr36M++;
+        if(BITbIsBitOn(byRSR, RSR_CRCOK)) {
+            pStatistic->CustomStat.ullRsr36MCRCOk++;
+        }
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"36M: ALL[%d], OK[%d]\n", (INT)pStatistic->CustomStat.ullRsr36M, (INT)pStatistic->CustomStat.ullRsr36MCRCOk);
+    }
+    else if(byRxRate==96){
+        pStatistic->CustomStat.ullRsr48M++;
+        if(BITbIsBitOn(byRSR, RSR_CRCOK)) {
+            pStatistic->CustomStat.ullRsr48MCRCOk++;
+        }
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"48M: ALL[%d], OK[%d]\n", (INT)pStatistic->CustomStat.ullRsr48M, (INT)pStatistic->CustomStat.ullRsr48MCRCOk);
+    }
+    else if(byRxRate==108){
+        pStatistic->CustomStat.ullRsr54M++;
+        if(BITbIsBitOn(byRSR, RSR_CRCOK)) {
+            pStatistic->CustomStat.ullRsr54MCRCOk++;
+        }
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"54M: ALL[%d], OK[%d]\n", (INT)pStatistic->CustomStat.ullRsr54M, (INT)pStatistic->CustomStat.ullRsr54MCRCOk);
+    }
+    else {
+    	DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Unknown: Total[%d], CRCOK[%d]\n", (INT)pStatistic->dwRsrRxPacket+1, (INT)pStatistic->dwRsrCRCOk);
+    }
+
+    if (BITbIsBitOn(byRSR, RSR_BSSIDOK))
+        pStatistic->dwRsrBSSIDOk++;
+
+    if (BITbIsBitOn(byRSR, RSR_BCNSSIDOK))
+        pStatistic->dwRsrBCNSSIDOk++;
+    if (BITbIsBitOn(byRSR, RSR_IVLDLEN))  //invalid len (> 2312 byte)
+        pStatistic->dwRsrLENErr++;
+    if (BITbIsBitOn(byRSR, RSR_IVLDTYP))  //invalid packet type
+        pStatistic->dwRsrTYPErr++;
+    if (BITbIsBitOn(byRSR, (RSR_IVLDTYP | RSR_IVLDLEN)))
+        pStatistic->dwRsrErr++;
+
+    if (BITbIsBitOn(byNewRSR, NEWRSR_DECRYPTOK))
+        pStatistic->dwNewRsrDECRYPTOK++;
+    if (BITbIsBitOn(byNewRSR, NEWRSR_CFPIND))
+        pStatistic->dwNewRsrCFP++;
+    if (BITbIsBitOn(byNewRSR, NEWRSR_HWUTSF))
+        pStatistic->dwNewRsrUTSF++;
+    if (BITbIsBitOn(byNewRSR, NEWRSR_BCNHITAID))
+        pStatistic->dwNewRsrHITAID++;
+    if (BITbIsBitOn(byNewRSR, NEWRSR_BCNHITAID0))
+        pStatistic->dwNewRsrHITAID0++;
+
+    // increase rx packet count
+    pStatistic->dwRsrRxPacket++;
+    pStatistic->dwRsrRxOctet += cbFrameLength;
+
+
+    if (IS_TYPE_DATA(pbyBuffer)) {
+        pStatistic->dwRsrRxData++;
+    } else if (IS_TYPE_MGMT(pbyBuffer)){
+        pStatistic->dwRsrRxManage++;
+    } else if (IS_TYPE_CONTROL(pbyBuffer)){
+        pStatistic->dwRsrRxControl++;
+    }
+
+    if (BITbIsBitOn(byRSR, RSR_ADDRBROAD))
+        pStatistic->dwRsrBroadcast++;
+    else if (BITbIsBitOn(byRSR, RSR_ADDRMULTI))
+        pStatistic->dwRsrMulticast++;
+    else
+        pStatistic->dwRsrDirected++;
+
+    if (WLAN_GET_FC_MOREFRAG(pHeader->wFrameCtl))
+        pStatistic->dwRsrRxFragment++;
+
+    if (cbFrameLength < MIN_PACKET_LEN + 4) {
+        pStatistic->dwRsrRunt++;
+    }
+    else if (cbFrameLength == MIN_PACKET_LEN + 4) {
+        pStatistic->dwRsrRxFrmLen64++;
+    }
+    else if ((65 <= cbFrameLength) && (cbFrameLength <= 127)) {
+        pStatistic->dwRsrRxFrmLen65_127++;
+    }
+    else if ((128 <= cbFrameLength) && (cbFrameLength <= 255)) {
+        pStatistic->dwRsrRxFrmLen128_255++;
+    }
+    else if ((256 <= cbFrameLength) && (cbFrameLength <= 511)) {
+        pStatistic->dwRsrRxFrmLen256_511++;
+    }
+    else if ((512 <= cbFrameLength) && (cbFrameLength <= 1023)) {
+        pStatistic->dwRsrRxFrmLen512_1023++;
+    }
+    else if ((1024 <= cbFrameLength) && (cbFrameLength <= MAX_PACKET_LEN + 4)) {
+        pStatistic->dwRsrRxFrmLen1024_1518++;
+    } else if (cbFrameLength > MAX_PACKET_LEN + 4) {
+        pStatistic->dwRsrLong++;
+    }
+
+}
+
+
+
+/*
+ * Description: Update Rx Statistic Counter and copy Rx buffer
+ *
+ * Parameters:
+ *  In:
+ *      pStatistic      - Pointer to Statistic Counter Data Structure
+ *      byRSR           - Rx Status
+ *      byNewRSR        - Rx Status
+ *      pbyBuffer       - Rx Buffer
+ *      cbFrameLength   - Rx Length
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+
+void
+STAvUpdateRDStatCounterEx (
+    PSStatCounter   pStatistic,
+    BYTE            byRSR,
+    BYTE            byNewRSR,
+    BYTE            byRxRate,
+    PBYTE           pbyBuffer,
+    UINT            cbFrameLength
+    )
+{
+    STAvUpdateRDStatCounter(
+                    pStatistic,
+                    byRSR,
+                    byNewRSR,
+                    byRxRate,
+                    pbyBuffer,
+                    cbFrameLength
+                    );
+
+    // rx length
+    pStatistic->dwCntRxFrmLength = cbFrameLength;
+    // rx pattern, we just see 10 bytes for sample
+    MEMvCopy(pStatistic->abyCntRxPattern, (PBYTE)pbyBuffer, 10);
+}
+
+
+/*
+ * Description: Update Tx Statistic Counter
+ *
+ * Parameters:
+ *  In:
+ *      pStatistic      - Pointer to Statistic Counter Data Structure
+ *      byTSR0          - Tx Status
+ *      byTSR1          - Tx Status
+ *      pbyBuffer       - Tx Buffer
+ *      cbFrameLength   - Tx Length
+ *      uIdx            - Index of Tx DMA
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void
+STAvUpdateTDStatCounter (
+    PSStatCounter   pStatistic,
+    BYTE            byTSR0,
+    BYTE            byTSR1,
+    PBYTE           pbyBuffer,
+    UINT            cbFrameLength,
+    UINT            uIdx
+    )
+{
+    PWLAN_80211HDR_A4   pHeader;
+    PBYTE               pbyDestAddr;
+    BYTE                byTSR0_NCR = byTSR0 & TSR0_NCR;
+
+
+
+    pHeader = (PWLAN_80211HDR_A4) pbyBuffer;
+    if (WLAN_GET_FC_TODS(pHeader->wFrameCtl) == 0) {
+        pbyDestAddr = &(pHeader->abyAddr1[0]);
+    }
+    else {
+        pbyDestAddr = &(pHeader->abyAddr3[0]);
+    }
+    // increase tx packet count
+    pStatistic->dwTsrTxPacket[uIdx]++;
+    pStatistic->dwTsrTxOctet[uIdx] += cbFrameLength;
+
+    if (byTSR0_NCR != 0) {
+        pStatistic->dwTsrRetry[uIdx]++;
+        pStatistic->dwTsrTotalRetry[uIdx] += byTSR0_NCR;
+
+        if (byTSR0_NCR == 1)
+            pStatistic->dwTsrOnceRetry[uIdx]++;
+        else
+            pStatistic->dwTsrMoreThanOnceRetry[uIdx]++;
+    }
+
+    if ((byTSR1&(TSR1_TERR|TSR1_RETRYTMO|TSR1_TMO|ACK_DATA)) == 0) {
+        pStatistic->ullTsrOK[uIdx]++;
+        pStatistic->CustomStat.ullTsrAllOK =
+            (pStatistic->ullTsrOK[TYPE_AC0DMA] + pStatistic->ullTsrOK[TYPE_TXDMA0]);
+        // update counters in case that successful transmit
+        if (IS_BROADCAST_ADDRESS(pbyDestAddr)) {
+            pStatistic->ullTxBroadcastFrames[uIdx]++;
+            pStatistic->ullTxBroadcastBytes[uIdx] += (ULONGLONG)cbFrameLength;
+        }
+        else if (IS_MULTICAST_ADDRESS(pbyDestAddr)) {
+            pStatistic->ullTxMulticastFrames[uIdx]++;
+            pStatistic->ullTxMulticastBytes[uIdx] += (ULONGLONG)cbFrameLength;
+        }
+        else {
+            pStatistic->ullTxDirectedFrames[uIdx]++;
+            pStatistic->ullTxDirectedBytes[uIdx] += (ULONGLONG)cbFrameLength;
+        }
+    }
+    else {
+        if (BITbIsBitOn(byTSR1, TSR1_TERR))
+            pStatistic->dwTsrErr[uIdx]++;
+        if (BITbIsBitOn(byTSR1, TSR1_RETRYTMO))
+            pStatistic->dwTsrRetryTimeout[uIdx]++;
+        if (BITbIsBitOn(byTSR1, TSR1_TMO))
+            pStatistic->dwTsrTransmitTimeout[uIdx]++;
+        if (BITbIsBitOn(byTSR1, ACK_DATA))
+            pStatistic->dwTsrACKData[uIdx]++;
+    }
+
+    if (IS_BROADCAST_ADDRESS(pbyDestAddr))
+        pStatistic->dwTsrBroadcast[uIdx]++;
+    else if (IS_MULTICAST_ADDRESS(pbyDestAddr))
+        pStatistic->dwTsrMulticast[uIdx]++;
+    else
+        pStatistic->dwTsrDirected[uIdx]++;
+
+}
+
+
+/*
+ * Description: Update Tx Statistic Counter and copy Tx buffer
+ *
+ * Parameters:
+ *  In:
+ *      pStatistic      - Pointer to Statistic Counter Data Structure
+ *      pbyBuffer       - Tx Buffer
+ *      cbFrameLength   - Tx Length
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void
+STAvUpdateTDStatCounterEx (
+    PSStatCounter   pStatistic,
+    PBYTE           pbyBuffer,
+    DWORD           cbFrameLength
+    )
+{
+    UINT    uPktLength;
+
+    uPktLength = (UINT)cbFrameLength;
+
+    // tx length
+    pStatistic->dwCntTxBufLength = uPktLength;
+    // tx pattern, we just see 16 bytes for sample
+    MEMvCopy(pStatistic->abyCntTxPattern, pbyBuffer, 16);
+}
+
+
+/*
+ * Description: Update 802.11 mib counter
+ *
+ * Parameters:
+ *  In:
+ *      p802_11Counter  - Pointer to 802.11 mib counter
+ *      pStatistic      - Pointer to Statistic Counter Data Structure
+ *      dwCounter       - hardware counter for 802.11 mib
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void
+STAvUpdate802_11Counter(
+    PSDot11Counters         p802_11Counter,
+    PSStatCounter           pStatistic,
+    DWORD                   dwCounter
+    )
+{
+    //p802_11Counter->TransmittedFragmentCount
+    p802_11Counter->MulticastTransmittedFrameCount = (ULONGLONG) (pStatistic->dwTsrBroadcast[TYPE_AC0DMA] +
+                                                                  pStatistic->dwTsrBroadcast[TYPE_TXDMA0] +
+                                                                  pStatistic->dwTsrMulticast[TYPE_AC0DMA] +
+                                                                  pStatistic->dwTsrMulticast[TYPE_TXDMA0]);
+    p802_11Counter->FailedCount = (ULONGLONG) (pStatistic->dwTsrErr[TYPE_AC0DMA] + pStatistic->dwTsrErr[TYPE_TXDMA0]);
+    p802_11Counter->RetryCount = (ULONGLONG) (pStatistic->dwTsrRetry[TYPE_AC0DMA] + pStatistic->dwTsrRetry[TYPE_TXDMA0]);
+    p802_11Counter->MultipleRetryCount = (ULONGLONG) (pStatistic->dwTsrMoreThanOnceRetry[TYPE_AC0DMA] +
+                                                          pStatistic->dwTsrMoreThanOnceRetry[TYPE_TXDMA0]);
+    //p802_11Counter->FrameDuplicateCount
+    p802_11Counter->RTSSuccessCount += (ULONGLONG)  (dwCounter & 0x000000ff);
+    p802_11Counter->RTSFailureCount += (ULONGLONG) ((dwCounter & 0x0000ff00) >> 8);
+    p802_11Counter->ACKFailureCount += (ULONGLONG) ((dwCounter & 0x00ff0000) >> 16);
+    p802_11Counter->FCSErrorCount +=   (ULONGLONG) ((dwCounter & 0xff000000) >> 24);
+    //p802_11Counter->ReceivedFragmentCount
+    p802_11Counter->MulticastReceivedFrameCount = (ULONGLONG) (pStatistic->dwRsrBroadcast +
+                                                               pStatistic->dwRsrMulticast);
+}
+
+/*
+ * Description: Clear 802.11 mib counter
+ *
+ * Parameters:
+ *  In:
+ *      p802_11Counter  - Pointer to 802.11 mib counter
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void
+STAvClear802_11Counter(PSDot11Counters p802_11Counter)
+{
+    // set memory to zero
+    ZERO_MEMORY(p802_11Counter, sizeof(SDot11Counters));
+}
diff --git a/drivers/staging/vt6655/mib.h b/drivers/staging/vt6655/mib.h
new file mode 100644
index 00000000000..b4e1c4a19a7
--- /dev/null
+++ b/drivers/staging/vt6655/mib.h
@@ -0,0 +1,399 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: mib.h
+ *
+ * Purpose: Implement MIB Data Structure
+ *
+ * Author: Tevin Chen
+ *
+ * Date: May 21, 1996
+ *
+ */
+
+#ifndef __MIB_H__
+#define __MIB_H__
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+#if !defined(__TETHER_H__)
+#include "tether.h"
+#endif
+#if !defined(__DESC_H__)
+#include "desc.h"
+#endif
+
+
+
+//#define ULONGLONG   ULONG
+
+/*---------------------  Export Definitions -------------------------*/
+//
+// 802.11 counter
+//
+
+typedef struct tagSDot11Counters {
+    ULONG       Length;             // Length of structure
+    ULONGLONG   TransmittedFragmentCount;
+    ULONGLONG   MulticastTransmittedFrameCount;
+    ULONGLONG   FailedCount;
+    ULONGLONG   RetryCount;
+    ULONGLONG   MultipleRetryCount;
+    ULONGLONG   RTSSuccessCount;
+    ULONGLONG   RTSFailureCount;
+    ULONGLONG   ACKFailureCount;
+    ULONGLONG   FrameDuplicateCount;
+    ULONGLONG   ReceivedFragmentCount;
+    ULONGLONG   MulticastReceivedFrameCount;
+    ULONGLONG   FCSErrorCount;
+    ULONGLONG   TKIPLocalMICFailures;
+    ULONGLONG   TKIPRemoteMICFailures;
+    ULONGLONG   TKIPICVErrors;
+    ULONGLONG   TKIPCounterMeasuresInvoked;
+    ULONGLONG   TKIPReplays;
+    ULONGLONG   CCMPFormatErrors;
+    ULONGLONG   CCMPReplays;
+    ULONGLONG   CCMPDecryptErrors;
+    ULONGLONG   FourWayHandshakeFailures;
+//    ULONGLONG   WEPUndecryptableCount;
+//    ULONGLONG   WEPICVErrorCount;
+//    ULONGLONG   DecryptSuccessCount;
+//    ULONGLONG   DecryptFailureCount;
+} SDot11Counters, DEF* PSDot11Counters;
+
+
+//
+// MIB2 counter
+//
+typedef struct tagSMib2Counter {
+    LONG    ifIndex;
+    TCHAR   ifDescr[256];               // max size 255 plus zero ending
+                                        // e.g. "interface 1"
+    LONG    ifType;
+    LONG    ifMtu;
+    DWORD   ifSpeed;
+    BYTE    ifPhysAddress[U_ETHER_ADDR_LEN];
+    LONG    ifAdminStatus;
+    LONG    ifOperStatus;
+    DWORD   ifLastChange;
+    DWORD   ifInOctets;
+    DWORD   ifInUcastPkts;
+    DWORD   ifInNUcastPkts;
+    DWORD   ifInDiscards;
+    DWORD   ifInErrors;
+    DWORD   ifInUnknownProtos;
+    DWORD   ifOutOctets;
+    DWORD   ifOutUcastPkts;
+    DWORD   ifOutNUcastPkts;
+    DWORD   ifOutDiscards;
+    DWORD   ifOutErrors;
+    DWORD   ifOutQLen;
+    DWORD   ifSpecific;
+} SMib2Counter, DEF* PSMib2Counter;
+
+// Value in the ifType entry
+//#define ETHERNETCSMACD      6           //
+#define WIRELESSLANIEEE80211b      6           //
+
+// Value in the ifAdminStatus/ifOperStatus entry
+#define UP                  1           //
+#define DOWN                2           //
+#define TESTING             3           //
+
+
+//
+// RMON counter
+//
+typedef struct tagSRmonCounter {
+    LONG    etherStatsIndex;
+    DWORD   etherStatsDataSource;
+    DWORD   etherStatsDropEvents;
+    DWORD   etherStatsOctets;
+    DWORD   etherStatsPkts;
+    DWORD   etherStatsBroadcastPkts;
+    DWORD   etherStatsMulticastPkts;
+    DWORD   etherStatsCRCAlignErrors;
+    DWORD   etherStatsUndersizePkts;
+    DWORD   etherStatsOversizePkts;
+    DWORD   etherStatsFragments;
+    DWORD   etherStatsJabbers;
+    DWORD   etherStatsCollisions;
+    DWORD   etherStatsPkt64Octets;
+    DWORD   etherStatsPkt65to127Octets;
+    DWORD   etherStatsPkt128to255Octets;
+    DWORD   etherStatsPkt256to511Octets;
+    DWORD   etherStatsPkt512to1023Octets;
+    DWORD   etherStatsPkt1024to1518Octets;
+    DWORD   etherStatsOwners;
+    DWORD   etherStatsStatus;
+} SRmonCounter, DEF* PSRmonCounter;
+
+//
+// Custom counter
+//
+typedef struct tagSCustomCounters {
+    ULONG       Length;
+
+    ULONGLONG   ullTsrAllOK;
+
+    ULONGLONG   ullRsr11M;
+    ULONGLONG   ullRsr5M;
+    ULONGLONG   ullRsr2M;
+    ULONGLONG   ullRsr1M;
+
+    ULONGLONG   ullRsr11MCRCOk;
+    ULONGLONG   ullRsr5MCRCOk;
+    ULONGLONG   ullRsr2MCRCOk;
+    ULONGLONG   ullRsr1MCRCOk;
+
+    ULONGLONG   ullRsr54M;
+    ULONGLONG   ullRsr48M;
+    ULONGLONG   ullRsr36M;
+    ULONGLONG   ullRsr24M;
+    ULONGLONG   ullRsr18M;
+    ULONGLONG   ullRsr12M;
+    ULONGLONG   ullRsr9M;
+    ULONGLONG   ullRsr6M;
+
+    ULONGLONG   ullRsr54MCRCOk;
+    ULONGLONG   ullRsr48MCRCOk;
+    ULONGLONG   ullRsr36MCRCOk;
+    ULONGLONG   ullRsr24MCRCOk;
+    ULONGLONG   ullRsr18MCRCOk;
+    ULONGLONG   ullRsr12MCRCOk;
+    ULONGLONG   ullRsr9MCRCOk;
+    ULONGLONG   ullRsr6MCRCOk;
+
+} SCustomCounters, DEF* PSCustomCounters;
+
+
+//
+// Custom counter
+//
+typedef struct tagSISRCounters {
+    ULONG   Length;
+
+    DWORD   dwIsrTx0OK;
+    DWORD   dwIsrAC0TxOK;
+    DWORD   dwIsrBeaconTxOK;
+    DWORD   dwIsrRx0OK;
+    DWORD   dwIsrTBTTInt;
+    DWORD   dwIsrSTIMERInt;
+    DWORD   dwIsrWatchDog;
+    DWORD   dwIsrUnrecoverableError;
+    DWORD   dwIsrSoftInterrupt;
+    DWORD   dwIsrMIBNearfull;
+    DWORD   dwIsrRxNoBuf;
+
+    DWORD   dwIsrUnknown;               // unknown interrupt count
+
+    DWORD   dwIsrRx1OK;
+    DWORD   dwIsrATIMTxOK;
+    DWORD   dwIsrSYNCTxOK;
+    DWORD   dwIsrCFPEnd;
+    DWORD   dwIsrATIMEnd;
+    DWORD   dwIsrSYNCFlushOK;
+    DWORD   dwIsrSTIMER1Int;
+    /////////////////////////////////////
+} SISRCounters, DEF* PSISRCounters;
+
+
+// Value in the etherStatsStatus entry
+#define VALID               1           //
+#define CREATE_REQUEST      2           //
+#define UNDER_CREATION      3           //
+#define INVALID             4           //
+
+//#define MAX_RATE            12
+//
+// statistic counter
+//
+typedef struct tagSStatCounter {
+    //
+    // ISR status count
+    //
+
+
+    // RSR status count
+    //
+    DWORD   dwRsrFrmAlgnErr;
+    DWORD   dwRsrErr;
+    DWORD   dwRsrCRCErr;
+    DWORD   dwRsrCRCOk;
+    DWORD   dwRsrBSSIDOk;
+    DWORD   dwRsrADDROk;
+    DWORD   dwRsrBCNSSIDOk;
+    DWORD   dwRsrLENErr;
+    DWORD   dwRsrTYPErr;
+
+    DWORD   dwNewRsrDECRYPTOK;
+    DWORD   dwNewRsrCFP;
+    DWORD   dwNewRsrUTSF;
+    DWORD   dwNewRsrHITAID;
+    DWORD   dwNewRsrHITAID0;
+
+    DWORD   dwRsrLong;
+    DWORD   dwRsrRunt;
+
+    DWORD   dwRsrRxControl;
+    DWORD   dwRsrRxData;
+    DWORD   dwRsrRxManage;
+
+    DWORD   dwRsrRxPacket;
+    DWORD   dwRsrRxOctet;
+    DWORD   dwRsrBroadcast;
+    DWORD   dwRsrMulticast;
+    DWORD   dwRsrDirected;
+    // 64-bit OID
+    ULONGLONG   ullRsrOK;
+
+    // for some optional OIDs (64 bits) and DMI support
+    ULONGLONG   ullRxBroadcastBytes;
+    ULONGLONG   ullRxMulticastBytes;
+    ULONGLONG   ullRxDirectedBytes;
+    ULONGLONG   ullRxBroadcastFrames;
+    ULONGLONG   ullRxMulticastFrames;
+    ULONGLONG   ullRxDirectedFrames;
+
+    DWORD   dwRsrRxFragment;
+    DWORD   dwRsrRxFrmLen64;
+    DWORD   dwRsrRxFrmLen65_127;
+    DWORD   dwRsrRxFrmLen128_255;
+    DWORD   dwRsrRxFrmLen256_511;
+    DWORD   dwRsrRxFrmLen512_1023;
+    DWORD   dwRsrRxFrmLen1024_1518;
+
+    // TSR status count
+    //
+    DWORD   dwTsrTotalRetry[TYPE_MAXTD];        // total collision retry count
+    DWORD   dwTsrOnceRetry[TYPE_MAXTD];         // this packet only occur one collision
+    DWORD   dwTsrMoreThanOnceRetry[TYPE_MAXTD]; // this packet occur more than one collision
+    DWORD   dwTsrRetry[TYPE_MAXTD];             // this packet has ever occur collision,
+                                         // that is (dwTsrOnceCollision0 + dwTsrMoreThanOnceCollision0)
+    DWORD   dwTsrACKData[TYPE_MAXTD];
+    DWORD   dwTsrErr[TYPE_MAXTD];
+    DWORD   dwAllTsrOK[TYPE_MAXTD];
+    DWORD   dwTsrRetryTimeout[TYPE_MAXTD];
+    DWORD   dwTsrTransmitTimeout[TYPE_MAXTD];
+
+    DWORD   dwTsrTxPacket[TYPE_MAXTD];
+    DWORD   dwTsrTxOctet[TYPE_MAXTD];
+    DWORD   dwTsrBroadcast[TYPE_MAXTD];
+    DWORD   dwTsrMulticast[TYPE_MAXTD];
+    DWORD   dwTsrDirected[TYPE_MAXTD];
+
+    // RD/TD count
+    DWORD   dwCntRxFrmLength;
+    DWORD   dwCntTxBufLength;
+
+    BYTE    abyCntRxPattern[16];
+    BYTE    abyCntTxPattern[16];
+
+
+
+    // Software check....
+    DWORD   dwCntRxDataErr;             // rx buffer data software compare CRC err count
+    DWORD   dwCntDecryptErr;            // rx buffer data software compare CRC err count
+    DWORD   dwCntRxICVErr;              // rx buffer data software compare CRC err count
+    UINT    idxRxErrorDesc[TYPE_MAXRD]; // index for rx data error RD
+
+    // 64-bit OID
+    ULONGLONG   ullTsrOK[TYPE_MAXTD];
+
+    // for some optional OIDs (64 bits) and DMI support
+    ULONGLONG   ullTxBroadcastFrames[TYPE_MAXTD];
+    ULONGLONG   ullTxMulticastFrames[TYPE_MAXTD];
+    ULONGLONG   ullTxDirectedFrames[TYPE_MAXTD];
+    ULONGLONG   ullTxBroadcastBytes[TYPE_MAXTD];
+    ULONGLONG   ullTxMulticastBytes[TYPE_MAXTD];
+    ULONGLONG   ullTxDirectedBytes[TYPE_MAXTD];
+
+//    DWORD   dwTxRetryCount[8];
+    //
+    // ISR status count
+    //
+    SISRCounters ISRStat;
+
+    SCustomCounters CustomStat;
+
+   #ifdef Calcu_LinkQual
+       //Tx count:
+    ULONG TxNoRetryOkCount;         //success tx no retry !
+    ULONG TxRetryOkCount;              //sucess tx but retry !
+    ULONG TxFailCount;                      //fail tx ?
+      //Rx count:
+    ULONG RxOkCnt;                          //sucess rx !
+    ULONG RxFcsErrCnt;                    //fail rx ?
+      //statistic
+    ULONG SignalStren;
+    ULONG LinkQuality;
+   #endif
+} SStatCounter, DEF* PSStatCounter;
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+#ifdef __cplusplus
+extern "C" {                            /* Assume C declarations for C++ */
+#endif /* __cplusplus */
+
+
+void STAvClearAllCounter(PSStatCounter pStatistic);
+
+void STAvUpdateIsrStatCounter(PSStatCounter pStatistic, DWORD dwIsr);
+
+void STAvUpdateRDStatCounter(PSStatCounter pStatistic,
+                              BYTE byRSR, BYTE byNewRSR, BYTE byRxRate,
+                              PBYTE pbyBuffer, UINT cbFrameLength);
+
+void STAvUpdateRDStatCounterEx(PSStatCounter pStatistic,
+                              BYTE byRSR, BYTE byNewRsr, BYTE byRxRate,
+                              PBYTE pbyBuffer, UINT cbFrameLength);
+
+void STAvUpdateTDStatCounter(PSStatCounter pStatistic,
+                             BYTE byTSR0, BYTE byTSR1,
+                             PBYTE pbyBuffer, UINT cbFrameLength, UINT uIdx );
+
+void STAvUpdateTDStatCounterEx(
+    PSStatCounter   pStatistic,
+    PBYTE           pbyBuffer,
+    DWORD           cbFrameLength
+    );
+
+void STAvUpdate802_11Counter(
+    PSDot11Counters p802_11Counter,
+    PSStatCounter   pStatistic,
+    DWORD           dwCounter
+    );
+
+void STAvClear802_11Counter(PSDot11Counters p802_11Counter);
+
+#ifdef __cplusplus
+}                                       /* End of extern "C" { */
+#endif /* __cplusplus */
+
+
+
+
+#endif // __MIB_H__
+
+
+
diff --git a/drivers/staging/vt6655/michael.c b/drivers/staging/vt6655/michael.c
new file mode 100644
index 00000000000..7bda4c19e90
--- /dev/null
+++ b/drivers/staging/vt6655/michael.c
@@ -0,0 +1,188 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: michael.cpp
+ *
+ * Purpose: The implementation of LIST data structure.
+ *
+ * Author: Kyle Hsu
+ *
+ * Date: Sep 4, 2002
+ *
+ * Functions:
+ *      s_dwGetUINT32 - Convert from BYTE[] to DWORD in a portable way
+ *      s_vPutUINT32 - Convert from DWORD to BYTE[] in a portable way
+ *      s_vClear - Reset the state to the empty message.
+ *      s_vSetKey - Set the key.
+ *      MIC_vInit - Set the key.
+ *      s_vAppendByte - Append the byte to our word-sized buffer.
+ *      MIC_vAppend - call s_vAppendByte.
+ *      MIC_vGetMIC - Append the minimum padding and call s_vAppendByte.
+ *
+ * Revision History:
+ *
+ */
+
+#if !defined(__TMACRO_H__)
+#include "tmacro.h"
+#endif
+#if !defined(__TBIT_H__)
+#include "tbit.h"
+#endif
+#if !defined(__MICHAEL_H__)
+#include "michael.h"
+#endif
+
+/*---------------------  Static Definitions -------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+
+/*---------------------  Static Functions  --------------------------*/
+/*
+static DWORD s_dwGetUINT32(BYTE * p);         // Get DWORD from 4 bytes LSByte first
+static VOID s_vPutUINT32(BYTE* p, DWORD val); // Put DWORD into 4 bytes LSByte first
+*/
+static VOID s_vClear(void);                       // Clear the internal message,
+                                              // resets the object to the state just after construction.
+static VOID s_vSetKey(DWORD dwK0, DWORD dwK1);
+static VOID s_vAppendByte(BYTE b);            // Add a single byte to the internal message
+
+/*---------------------  Export Variables  --------------------------*/
+static DWORD  L, R;           // Current state
+
+static DWORD  K0, K1;         // Key
+static DWORD  M;              // Message accumulator (single word)
+static UINT   nBytesInM;      // # bytes in M
+
+/*---------------------  Export Functions  --------------------------*/
+
+/*
+static DWORD s_dwGetUINT32 (BYTE * p)
+// Convert from BYTE[] to DWORD in a portable way
+{
+    DWORD res = 0;
+    UINT i;
+    for(i=0; i<4; i++ )
+    {
+        res |= (*p++) << (8*i);
+    }
+    return res;
+}
+
+static VOID s_vPutUINT32 (BYTE* p, DWORD val)
+// Convert from DWORD to BYTE[] in a portable way
+{
+    UINT i;
+    for(i=0; i<4; i++ )
+    {
+        *p++ = (BYTE) (val & 0xff);
+        val >>= 8;
+    }
+}
+*/
+
+static VOID s_vClear (void)
+{
+    // Reset the state to the empty message.
+    L = K0;
+    R = K1;
+    nBytesInM = 0;
+    M = 0;
+}
+
+static VOID s_vSetKey (DWORD dwK0, DWORD dwK1)
+{
+    // Set the key
+    K0 = dwK0;
+    K1 = dwK1;
+    // and reset the message
+    s_vClear();
+}
+
+static VOID s_vAppendByte (BYTE b)
+{
+    // Append the byte to our word-sized buffer
+    M |= b << (8*nBytesInM);
+    nBytesInM++;
+    // Process the word if it is full.
+    if( nBytesInM >= 4 )
+    {
+        L ^= M;
+        R ^= ROL32( L, 17 );
+        L += R;
+        R ^= ((L & 0xff00ff00) >> 8) | ((L & 0x00ff00ff) << 8);
+        L += R;
+        R ^= ROL32( L, 3 );
+        L += R;
+        R ^= ROR32( L, 2 );
+        L += R;
+        // Clear the buffer
+        M = 0;
+        nBytesInM = 0;
+    }
+}
+
+VOID MIC_vInit (DWORD dwK0, DWORD dwK1)
+{
+    // Set the key
+    s_vSetKey(dwK0, dwK1);
+}
+
+
+VOID MIC_vUnInit (void)
+{
+    // Wipe the key material
+    K0 = 0;
+    K1 = 0;
+
+    // And the other fields as well.
+    //Note that this sets (L,R) to (K0,K1) which is just fine.
+    s_vClear();
+}
+
+VOID MIC_vAppend (PBYTE src, UINT nBytes)
+{
+    // This is simple
+    while (nBytes > 0)
+    {
+        s_vAppendByte(*src++);
+        nBytes--;
+    }
+}
+
+VOID MIC_vGetMIC (PDWORD pdwL, PDWORD pdwR)
+{
+    // Append the minimum padding
+    s_vAppendByte(0x5a);
+    s_vAppendByte(0);
+    s_vAppendByte(0);
+    s_vAppendByte(0);
+    s_vAppendByte(0);
+    // and then zeroes until the length is a multiple of 4
+    while( nBytesInM != 0 )
+    {
+        s_vAppendByte(0);
+    }
+    // The s_vAppendByte function has already computed the result.
+    *pdwL = L;
+    *pdwR = R;
+    // Reset to the empty message.
+    s_vClear();
+}
+
diff --git a/drivers/staging/vt6655/michael.h b/drivers/staging/vt6655/michael.h
new file mode 100644
index 00000000000..62a24a6083a
--- /dev/null
+++ b/drivers/staging/vt6655/michael.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: Michael.h
+ *
+ * Purpose: Reference implementation for Michael
+ *          written by Niels Ferguson
+ *
+ * Author: Kyle Hsu
+ *
+ * Date: Jan 2, 2003
+ *
+ */
+
+
+#ifndef __MICHAEL_H__
+#define __MICHAEL_H__
+
+#if !defined(__UMEM_H__)
+#include "umem.h"
+#endif
+/*---------------------  Export Definitions -------------------------*/
+
+/*---------------------  Export Types  ------------------------------*/
+
+VOID MIC_vInit(DWORD dwK0, DWORD dwK1);
+
+VOID MIC_vUnInit(void);
+
+// Append bytes to the message to be MICed
+VOID MIC_vAppend(PBYTE src, UINT nBytes);
+
+// Get the MIC result. Destination should accept 8 bytes of result.
+// This also resets the message to empty.
+VOID MIC_vGetMIC(PDWORD pdwL, PDWORD pdwR);
+
+/*---------------------  Export Macros ------------------------------*/
+
+// Rotation functions on 32 bit values
+#define ROL32( A, n ) \
+ ( ((A) << (n)) | ( ((A)>>(32-(n)))  & ( (1UL << (n)) - 1 ) ) )
+#define ROR32( A, n ) ROL32( (A), 32-(n) )
+
+#endif //__MICHAEL_H__
+
+
diff --git a/drivers/staging/vt6655/power.c b/drivers/staging/vt6655/power.c
new file mode 100644
index 00000000000..edd8336712a
--- /dev/null
+++ b/drivers/staging/vt6655/power.c
@@ -0,0 +1,441 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: power.c
+ *
+ * Purpose: Handles 802.11 power managment  functions
+ *
+ * Author: Lyndon Chen
+ *
+ * Date: July 17, 2002
+ *
+ * Functions:
+ *      PSvEnablePowerSaving - Enable Power Saving Mode
+ *      PSvDiasblePowerSaving - Disable Power Saving Mode
+ *      PSbConsiderPowerDown - Decide if we can Power Down
+ *      PSvSendPSPOLL - Send PS-POLL packet
+ *      PSbSendNullPacket - Send Null packet
+ *      PSbIsNextTBTTWakeUp - Decide if we need to wake up at next Beacon
+ *
+ * Revision History:
+ *
+ */
+
+
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+#if !defined(__TBIT_H__)
+#include "tbit.h"
+#endif
+#if !defined(__MAC_H__)
+#include "mac.h"
+#endif
+#if !defined(__DEVICE_H__)
+#include "device.h"
+#endif
+#if !defined(__WMGR_H__)
+#include "wmgr.h"
+#endif
+#if !defined(__POWER_H__)
+#include "power.h"
+#endif
+#if !defined(__WCMD_H__)
+#include "wcmd.h"
+#endif
+#if !defined(__TBIT_H__)
+#include "tbit.h"
+#endif
+#if !defined(__UMEM_H__)
+#include "umem.h"
+#endif
+#if !defined(__RXTX_H__)
+#include "rxtx.h"
+#endif
+#if !defined(__CARD_H__)
+#include "card.h"
+#endif
+
+
+
+
+/*---------------------  Static Definitions -------------------------*/
+
+
+
+
+/*---------------------  Static Classes  ----------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+static int          msglevel                =MSG_LEVEL_INFO;
+/*---------------------  Static Functions  --------------------------*/
+
+
+/*---------------------  Export Variables  --------------------------*/
+
+
+/*---------------------  Export Functions  --------------------------*/
+
+/*+
+ *
+ * Routine Description:
+ * Enable hw power saving functions
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+
+VOID
+PSvEnablePowerSaving(
+    IN HANDLE hDeviceContext,
+    IN WORD wListenInterval
+    )
+{
+    PSDevice        pDevice = (PSDevice)hDeviceContext;
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+    WORD            wAID = pMgmt->wCurrAID | BIT14 | BIT15;
+
+    // set period of power up before TBTT
+    VNSvOutPortW(pDevice->PortOffset + MAC_REG_PWBT, C_PWBT);
+    if (pDevice->eOPMode != OP_MODE_ADHOC) {
+        // set AID
+        VNSvOutPortW(pDevice->PortOffset + MAC_REG_AIDATIM, wAID);
+    } else {
+    	// set ATIM Window
+        MACvWriteATIMW(pDevice->PortOffset, pMgmt->wCurrATIMWindow);
+    }
+    // Set AutoSleep
+    MACvRegBitsOn(pDevice->PortOffset, MAC_REG_PSCFG, PSCFG_AUTOSLEEP);
+    // Set HWUTSF
+    MACvRegBitsOn(pDevice->PortOffset, MAC_REG_TFTCTL, TFTCTL_HWUTSF);
+
+    if (wListenInterval >= 2) {
+        // clear always listen beacon
+        MACvRegBitsOff(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_ALBCN);
+        //pDevice->wCFG &= ~CFG_ALB;
+        // first time set listen next beacon
+        MACvRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_LNBCN);
+        pMgmt->wCountToWakeUp = wListenInterval;
+    }
+    else {
+        // always listen beacon
+        MACvRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_ALBCN);
+        //pDevice->wCFG |= CFG_ALB;
+        pMgmt->wCountToWakeUp = 0;
+    }
+
+    // enable power saving hw function
+    MACvRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_PSEN);
+    pDevice->bEnablePSMode = TRUE;
+
+    if (pDevice->eOPMode == OP_MODE_ADHOC) {
+//        bMgrPrepareBeaconToSend((HANDLE)pDevice, pMgmt);
+    }
+    // We don't send null pkt in ad hoc mode since beacon will handle this.
+    else if (pDevice->eOPMode == OP_MODE_INFRASTRUCTURE) {
+        PSbSendNullPacket(pDevice);
+    }
+    pDevice->bPWBitOn = TRUE;
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "PS:Power Saving Mode Enable... \n");
+    return;
+}
+
+
+
+
+
+
+/*+
+ *
+ * Routine Description:
+ * Disable hw power saving functions
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+VOID
+PSvDisablePowerSaving(
+    IN HANDLE hDeviceContext
+    )
+{
+    PSDevice        pDevice = (PSDevice)hDeviceContext;
+//    PSMgmtObject    pMgmt = pDevice->pMgmt;
+
+    // disable power saving hw function
+    MACbPSWakeup(pDevice->PortOffset);
+    //clear AutoSleep
+    MACvRegBitsOff(pDevice->PortOffset, MAC_REG_PSCFG, PSCFG_AUTOSLEEP);
+    //clear HWUTSF
+    MACvRegBitsOff(pDevice->PortOffset, MAC_REG_TFTCTL, TFTCTL_HWUTSF);
+    // set always listen beacon
+    MACvRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_ALBCN);
+
+    pDevice->bEnablePSMode = FALSE;
+
+    if (pDevice->eOPMode == OP_MODE_INFRASTRUCTURE) {
+        PSbSendNullPacket(pDevice);
+    }
+    pDevice->bPWBitOn = FALSE;
+    return;
+}
+
+
+/*+
+ *
+ * Routine Description:
+ * Consider to power down when no more packets to tx or rx.
+ *
+ * Return Value:
+ *    TRUE, if power down success
+ *    FALSE, if fail
+-*/
+
+
+BOOL
+PSbConsiderPowerDown(
+    IN HANDLE hDeviceContext,
+    IN BOOL bCheckRxDMA,
+    IN BOOL bCheckCountToWakeUp
+    )
+{
+    PSDevice        pDevice = (PSDevice)hDeviceContext;
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+    UINT            uIdx;
+
+    // check if already in Doze mode
+    if (MACbIsRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_PS))
+        return TRUE;
+
+    if (pMgmt->eCurrMode != WMAC_MODE_IBSS_STA) {
+        // check if in TIM wake period
+        if (pMgmt->bInTIMWake)
+            return FALSE;
+    }
+
+    // check scan state
+    if (pDevice->bCmdRunning)
+        return FALSE;
+
+    // Froce PSEN on
+    MACvRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_PSEN);
+
+    // check if all TD are empty,
+    for (uIdx = 0; uIdx < TYPE_MAXTD; uIdx ++) {
+        if (pDevice->iTDUsed[uIdx] != 0)
+            return FALSE;
+    }
+
+    // check if rx isr is clear
+    if (bCheckRxDMA &&
+        ((pDevice->dwIsr& ISR_RXDMA0) != 0) &&
+        ((pDevice->dwIsr & ISR_RXDMA1) != 0)){
+        return FALSE;
+    };
+
+    if (pMgmt->eCurrMode != WMAC_MODE_IBSS_STA) {
+        if (bCheckCountToWakeUp &&
+           (pMgmt->wCountToWakeUp == 0 || pMgmt->wCountToWakeUp == 1)) {
+             return FALSE;
+        }
+    }
+
+    // no Tx, no Rx isr, now go to Doze
+    MACvRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_GO2DOZE);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Go to Doze ZZZZZZZZZZZZZZZ\n");
+    return TRUE;
+}
+
+
+
+/*+
+ *
+ * Routine Description:
+ * Send PS-POLL packet
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+
+
+VOID
+PSvSendPSPOLL(
+    IN HANDLE hDeviceContext
+    )
+{
+    PSDevice            pDevice = (PSDevice)hDeviceContext;
+    PSMgmtObject        pMgmt = pDevice->pMgmt;
+    PSTxMgmtPacket      pTxPacket = NULL;
+
+
+    memset(pMgmt->pbyPSPacketPool, 0, sizeof(STxMgmtPacket) + WLAN_HDR_ADDR2_LEN);
+    pTxPacket = (PSTxMgmtPacket)pMgmt->pbyPSPacketPool;
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+    pTxPacket->p80211Header->sA2.wFrameCtl = cpu_to_le16(
+         (
+         WLAN_SET_FC_FTYPE(WLAN_TYPE_CTL) |
+         WLAN_SET_FC_FSTYPE(WLAN_FSTYPE_PSPOLL) |
+         WLAN_SET_FC_PWRMGT(0)
+         ));
+    pTxPacket->p80211Header->sA2.wDurationID = pMgmt->wCurrAID | BIT14 | BIT15;
+    memcpy(pTxPacket->p80211Header->sA2.abyAddr1, pMgmt->abyCurrBSSID, WLAN_ADDR_LEN);
+    memcpy(pTxPacket->p80211Header->sA2.abyAddr2, pMgmt->abyMACAddr, WLAN_ADDR_LEN);
+    pTxPacket->cbMPDULen = WLAN_HDR_ADDR2_LEN;
+    pTxPacket->cbPayloadLen = 0;
+    // send the frame
+    if (csMgmt_xmit(pDevice, pTxPacket) != CMD_STATUS_PENDING) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Send PS-Poll packet failed..\n");
+    }
+    else {
+//        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Send PS-Poll packet success..\n");
+    };
+
+    return;
+}
+
+
+
+/*+
+ *
+ * Routine Description:
+ * Send NULL packet to AP for notification power state of STA
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+BOOL
+PSbSendNullPacket(
+    IN HANDLE hDeviceContext
+    )
+{
+    PSDevice            pDevice = (PSDevice)hDeviceContext;
+    PSTxMgmtPacket      pTxPacket = NULL;
+    PSMgmtObject        pMgmt = pDevice->pMgmt;
+    UINT                uIdx;
+
+
+    if (pDevice->bLinkPass == FALSE) {
+        return FALSE;
+    }
+    #ifdef TxInSleep
+     if ((pDevice->bEnablePSMode == FALSE) &&
+	  (pDevice->fTxDataInSleep == FALSE)){
+        return FALSE;
+    }
+#else
+    if (pDevice->bEnablePSMode == FALSE) {
+        return FALSE;
+    }
+#endif
+    if (pDevice->bEnablePSMode) {
+        for (uIdx = 0; uIdx < TYPE_MAXTD; uIdx ++) {
+            if (pDevice->iTDUsed[uIdx] != 0)
+                return FALSE;
+        }
+    }
+
+    memset(pMgmt->pbyPSPacketPool, 0, sizeof(STxMgmtPacket) + WLAN_NULLDATA_FR_MAXLEN);
+    pTxPacket = (PSTxMgmtPacket)pMgmt->pbyPSPacketPool;
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+
+    if (pDevice->bEnablePSMode) {
+
+        pTxPacket->p80211Header->sA3.wFrameCtl = cpu_to_le16(
+             (
+            WLAN_SET_FC_FTYPE(WLAN_TYPE_DATA) |
+            WLAN_SET_FC_FSTYPE(WLAN_FSTYPE_NULL) |
+            WLAN_SET_FC_PWRMGT(1)
+            ));
+    }
+    else {
+        pTxPacket->p80211Header->sA3.wFrameCtl = cpu_to_le16(
+             (
+            WLAN_SET_FC_FTYPE(WLAN_TYPE_DATA) |
+            WLAN_SET_FC_FSTYPE(WLAN_FSTYPE_NULL) |
+            WLAN_SET_FC_PWRMGT(0)
+            ));
+    }
+
+    if(pMgmt->eCurrMode != WMAC_MODE_IBSS_STA) {
+        pTxPacket->p80211Header->sA3.wFrameCtl |= cpu_to_le16((WORD)WLAN_SET_FC_TODS(1));
+    }
+
+    memcpy(pTxPacket->p80211Header->sA3.abyAddr1, pMgmt->abyCurrBSSID, WLAN_ADDR_LEN);
+    memcpy(pTxPacket->p80211Header->sA3.abyAddr2, pMgmt->abyMACAddr, WLAN_ADDR_LEN);
+    memcpy(pTxPacket->p80211Header->sA3.abyAddr3, pMgmt->abyCurrBSSID, WLAN_BSSID_LEN);
+    pTxPacket->cbMPDULen = WLAN_HDR_ADDR3_LEN;
+    pTxPacket->cbPayloadLen = 0;
+    // send the frame
+    if (csMgmt_xmit(pDevice, pTxPacket) != CMD_STATUS_PENDING) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Send Null Packet failed !\n");
+        return FALSE;
+    }
+    else {
+
+//            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Send Null Packet success....\n");
+    }
+
+
+    return TRUE ;
+}
+
+/*+
+ *
+ * Routine Description:
+ * Check if Next TBTT must wake up
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+BOOL
+PSbIsNextTBTTWakeUp(
+    IN HANDLE hDeviceContext
+    )
+{
+
+    PSDevice         pDevice = (PSDevice)hDeviceContext;
+    PSMgmtObject        pMgmt = pDevice->pMgmt;
+    BOOL                bWakeUp = FALSE;
+
+    if (pMgmt->wListenInterval >= 2) {
+        if (pMgmt->wCountToWakeUp == 0) {
+            pMgmt->wCountToWakeUp = pMgmt->wListenInterval;
+        }
+
+        pMgmt->wCountToWakeUp --;
+
+        if (pMgmt->wCountToWakeUp == 1) {
+            // Turn on wake up to listen next beacon
+            MACvRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_LNBCN);
+            bWakeUp = TRUE;
+        }
+
+    }
+
+    return bWakeUp;
+}
+
diff --git a/drivers/staging/vt6655/power.h b/drivers/staging/vt6655/power.h
new file mode 100644
index 00000000000..a01e7e9aaf6
--- /dev/null
+++ b/drivers/staging/vt6655/power.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: power.h
+ *
+ * Purpose: Handles 802.11 power managment  functions
+ *
+ * Author: Lyndon Chen
+ *
+ * Date: July 17, 2002
+ *
+ */
+
+#ifndef __POWER_H__
+#define __POWER_H__
+
+
+/*---------------------  Export Definitions -------------------------*/
+#define     C_PWBT                   1000      // micro sec. power up before TBTT
+#define     PS_FAST_INTERVAL         1         // Fast power saving listen interval
+#define     PS_MAX_INTERVAL          4         // MAX power saving listen interval
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+
+/*---------------------  Export Types  ------------------------------*/
+
+
+/*---------------------  Export Functions  --------------------------*/
+
+// IN PSDevice pDevice
+// IN PSDevice hDeviceContext
+
+BOOL
+PSbConsiderPowerDown(
+    IN HANDLE hDeviceContext,
+    IN BOOL bCheckRxDMA,
+    IN BOOL bCheckCountToWakeUp
+    );
+
+VOID
+PSvDisablePowerSaving(
+    IN HANDLE hDeviceContext
+    );
+
+VOID
+PSvEnablePowerSaving(
+    IN HANDLE hDeviceContext,
+    IN WORD wListenInterval
+    );
+
+VOID
+PSvSendPSPOLL(
+    IN HANDLE hDeviceContext
+    );
+
+BOOL
+PSbSendNullPacket(
+    IN HANDLE hDeviceContext
+    );
+
+BOOL
+PSbIsNextTBTTWakeUp(
+    IN HANDLE hDeviceContext
+    );
+
+#endif //__POWER_H__
diff --git a/drivers/staging/vt6655/rc4.c b/drivers/staging/vt6655/rc4.c
new file mode 100644
index 00000000000..0345e3247f4
--- /dev/null
+++ b/drivers/staging/vt6655/rc4.c
@@ -0,0 +1,86 @@
+/*
+ * File: rc4.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Purpose:
+ *
+ * Functions:
+ *
+ * Revision History:
+ *
+ * Author: Kyle Hsu
+ *
+ * Date: Sep 4, 2002
+ *
+ */
+
+#if !defined(__RC4_H__)
+#include "rc4.h"
+#endif
+
+VOID rc4_init(PRC4Ext pRC4, PBYTE pbyKey, UINT cbKey_len)
+{
+    UINT  ust1, ust2;
+    UINT  keyindex;
+    UINT  stateindex;
+    PBYTE pbyst;
+    UINT  idx;
+
+    pbyst = pRC4->abystate;
+    pRC4->ux = 0;
+    pRC4->uy = 0;
+    for (idx = 0; idx < 256; idx++)
+        pbyst[idx] = (BYTE)idx;
+    keyindex = 0;
+    stateindex = 0;
+    for (idx = 0; idx < 256; idx++) {
+        ust1 = pbyst[idx];
+        stateindex = (stateindex + pbyKey[keyindex] + ust1) & 0xff;
+        ust2 = pbyst[stateindex];
+        pbyst[stateindex] = (BYTE)ust1;
+        pbyst[idx] = (BYTE)ust2;
+        if (++keyindex >= cbKey_len)
+            keyindex = 0;
+    }
+}
+
+UINT rc4_byte(PRC4Ext pRC4)
+{
+    UINT ux;
+    UINT uy;
+    UINT ustx, usty;
+    PBYTE pbyst;
+
+    pbyst = pRC4->abystate;
+    ux = (pRC4->ux + 1) & 0xff;
+    ustx = pbyst[ux];
+    uy = (ustx + pRC4->uy) & 0xff;
+    usty = pbyst[uy];
+    pRC4->ux = ux;
+    pRC4->uy = uy;
+    pbyst[uy] = (BYTE)ustx;
+    pbyst[ux] = (BYTE)usty;
+
+    return pbyst[(ustx + usty) & 0xff];
+}
+
+VOID rc4_encrypt(PRC4Ext pRC4, PBYTE pbyDest,
+                     PBYTE pbySrc, UINT cbData_len)
+{
+    UINT ii;
+    for (ii = 0; ii < cbData_len; ii++)
+        pbyDest[ii] = (BYTE)(pbySrc[ii] ^ rc4_byte(pRC4));
+}
diff --git a/drivers/staging/vt6655/rc4.h b/drivers/staging/vt6655/rc4.h
new file mode 100644
index 00000000000..4e3ccc559c8
--- /dev/null
+++ b/drivers/staging/vt6655/rc4.h
@@ -0,0 +1,51 @@
+/*
+ * File: rc4.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Purpose:
+ *
+ * Functions:
+ *
+ * Revision History:
+ *
+ * Author: Kyle Hsu
+ *
+ * Date: Sep 4, 2002
+ *
+ */
+
+#ifndef __RC4_H__
+#define __RC4_H__
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+
+
+
+/*---------------------  Export Definitions -------------------------*/
+/*---------------------  Export Types  ------------------------------*/
+typedef struct {
+    UINT ux;
+    UINT uy;
+    BYTE abystate[256];
+} RC4Ext, DEF* PRC4Ext;
+
+VOID rc4_init(PRC4Ext pRC4, PBYTE pbyKey, UINT cbKey_len);
+UINT rc4_byte(PRC4Ext pRC4);
+void rc4_encrypt(PRC4Ext pRC4, PBYTE pbyDest, PBYTE pbySrc, UINT cbData_len);
+
+#endif //__RC4_H__
diff --git a/drivers/staging/vt6655/rf.c b/drivers/staging/vt6655/rf.c
new file mode 100644
index 00000000000..9d4e3eb7c8e
--- /dev/null
+++ b/drivers/staging/vt6655/rf.c
@@ -0,0 +1,1283 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: rf.c
+ *
+ * Purpose: rf function code
+ *
+ * Author: Jerry Chen
+ *
+ * Date: Feb. 19, 2004
+ *
+ * Functions:
+ *      IFRFbWriteEmbeded      - Embeded write RF register via MAC
+ *
+ * Revision History:
+ *
+ */
+#if !defined(__MAC_H__)
+#include "mac.h"
+#endif
+#if !defined(__SROM_H__)
+#include "srom.h"
+#endif
+#if !defined(__TBIT_H__)
+#include "tbit.h"
+#endif
+#if !defined(__RF_H__)
+#include "rf.h"
+#endif
+#if !defined(__BASEBAND_H__)
+#include "baseband.h"
+#endif
+
+/*---------------------  Static Definitions -------------------------*/
+
+//static int          msglevel                =MSG_LEVEL_INFO;
+
+#define BY_RF2959_REG_LEN     23 //24bits
+#define CB_RF2959_INIT_SEQ    15
+#define SWITCH_CHANNEL_DELAY_RF2959 200 //us
+#define RF2959_PWR_IDX_LEN    32
+
+#define BY_MA2825_REG_LEN     23 //24bit
+#define CB_MA2825_INIT_SEQ    13
+#define SWITCH_CHANNEL_DELAY_MA2825 200 //us
+#define MA2825_PWR_IDX_LEN    31
+
+#define BY_AL2230_REG_LEN     23 //24bit
+#define CB_AL2230_INIT_SEQ    15
+#define SWITCH_CHANNEL_DELAY_AL2230 200 //us
+#define AL2230_PWR_IDX_LEN    64
+
+
+#define BY_UW2451_REG_LEN     23
+#define CB_UW2451_INIT_SEQ    6
+#define SWITCH_CHANNEL_DELAY_UW2451 200 //us
+#define UW2451_PWR_IDX_LEN    25
+
+//{{ RobertYu: 20041118
+#define BY_MA2829_REG_LEN     23 //24bit
+#define CB_MA2829_INIT_SEQ    13
+#define SWITCH_CHANNEL_DELAY_MA2829 200 //us
+#define MA2829_PWR_IDX_LEN    64
+//}} RobertYu
+
+//{{ RobertYu:20050103
+#define BY_AL7230_REG_LEN     23 //24bit
+#define CB_AL7230_INIT_SEQ    16
+#define SWITCH_CHANNEL_DELAY_AL7230 200 //us
+#define AL7230_PWR_IDX_LEN    64
+//}} RobertYu
+
+//{{ RobertYu: 20041210
+#define BY_UW2452_REG_LEN     23
+#define CB_UW2452_INIT_SEQ    5 //RoberYu:20050113, Rev0.2 Programming Guide(remove R3, so 6-->5)
+#define SWITCH_CHANNEL_DELAY_UW2452 100 //us
+#define UW2452_PWR_IDX_LEN    64
+//}} RobertYu
+
+#define BY_VT3226_REG_LEN     23
+#define CB_VT3226_INIT_SEQ    12
+#define SWITCH_CHANNEL_DELAY_VT3226 200 //us
+#define VT3226_PWR_IDX_LEN    16
+
+/*---------------------  Static Classes  ----------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+
+
+
+const DWORD dwAL2230InitTable[CB_AL2230_INIT_SEQ] = {
+    0x03F79000+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, //
+    0x03333100+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, //
+    0x01A00200+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, //
+    0x00FFF300+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, //
+    0x0005A400+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, //
+    0x0F4DC500+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, //
+    0x0805B600+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, //
+    0x0146C700+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, //
+    0x00068800+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, //
+    0x0403B900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, //
+    0x00DBBA00+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, //
+    0x00099B00+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, //
+    0x0BDFFC00+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x00000D00+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x00580F00+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW
+    };
+
+const DWORD dwAL2230ChannelTable0[CB_MAX_CHANNEL] = {
+    0x03F79000+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 1, Tf = 2412MHz
+    0x03F79000+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 2, Tf = 2417MHz
+    0x03E79000+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 3, Tf = 2422MHz
+    0x03E79000+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 4, Tf = 2427MHz
+    0x03F7A000+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 5, Tf = 2432MHz
+    0x03F7A000+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 6, Tf = 2437MHz
+    0x03E7A000+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 7, Tf = 2442MHz
+    0x03E7A000+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 8, Tf = 2447MHz
+    0x03F7B000+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 9, Tf = 2452MHz
+    0x03F7B000+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 10, Tf = 2457MHz
+    0x03E7B000+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 11, Tf = 2462MHz
+    0x03E7B000+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 12, Tf = 2467MHz
+    0x03F7C000+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 13, Tf = 2472MHz
+    0x03E7C000+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW  // channel = 14, Tf = 2412M
+    };
+
+const DWORD dwAL2230ChannelTable1[CB_MAX_CHANNEL] = {
+    0x03333100+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 1, Tf = 2412MHz
+    0x0B333100+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 2, Tf = 2417MHz
+    0x03333100+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 3, Tf = 2422MHz
+    0x0B333100+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 4, Tf = 2427MHz
+    0x03333100+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 5, Tf = 2432MHz
+    0x0B333100+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 6, Tf = 2437MHz
+    0x03333100+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 7, Tf = 2442MHz
+    0x0B333100+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 8, Tf = 2447MHz
+    0x03333100+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 9, Tf = 2452MHz
+    0x0B333100+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 10, Tf = 2457MHz
+    0x03333100+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 11, Tf = 2462MHz
+    0x0B333100+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 12, Tf = 2467MHz
+    0x03333100+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 13, Tf = 2472MHz
+    0x06666100+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW  // channel = 14, Tf = 2412M
+    };
+
+DWORD dwAL2230PowerTable[AL2230_PWR_IDX_LEN] = {
+    0x04040900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04041900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04042900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04043900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04044900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04045900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04046900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04047900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04048900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04049900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x0404A900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x0404B900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x0404C900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x0404D900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x0404E900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x0404F900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04050900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04051900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04052900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04053900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04054900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04055900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04056900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04057900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04058900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04059900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x0405A900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x0405B900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x0405C900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x0405D900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x0405E900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x0405F900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04060900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04061900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04062900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04063900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04064900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04065900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04066900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04067900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04068900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04069900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x0406A900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x0406B900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x0406C900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x0406D900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x0406E900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x0406F900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04070900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04071900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04072900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04073900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04074900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04075900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04076900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04077900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04078900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x04079900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x0407A900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x0407B900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x0407C900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x0407D900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x0407E900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x0407F900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW
+    };
+
+//{{ RobertYu:20050104
+// 40MHz reference frequency
+// Need to Pull PLLON(PE3) low when writing channel registers through 3-wire.
+const DWORD dwAL7230InitTable[CB_AL7230_INIT_SEQ] = {
+    0x00379000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Channel1 // Need modify for 11a
+    0x13333100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Channel1 // Need modify for 11a
+    0x841FF200+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Need modify for 11a: 451FE2
+    0x3FDFA300+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Need modify for 11a: 5FDFA3
+    0x7FD78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // 11b/g    // Need modify for 11a
+    //0x802B4500+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Need modify for 11a: 8D1B45
+    // RoberYu:20050113, Rev0.47 Regsiter Setting Guide
+    0x802B5500+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Need modify for 11a: 8D1B55
+    0x56AF3600+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW,
+    0xCE020700+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Need modify for 11a: 860207
+    0x6EBC0800+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x221BB900+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW,
+    0xE0000A00+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Need modify for 11a: E0600A
+    0x08031B00+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // init 0x080B1B00 => 0x080F1B00 for 3 wire control TxGain(D10)
+    //0x00093C00+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Need modify for 11a: 00143C
+    // RoberYu:20050113, Rev0.47 Regsiter Setting Guide
+    0x000A3C00+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Need modify for 11a: 00143C
+    0xFFFFFD00+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x00000E00+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x1ABA8F00+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW  // Need modify for 11a: 12BACF
+    };
+
+const DWORD dwAL7230InitTableAMode[CB_AL7230_INIT_SEQ] = {
+    0x0FF52000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Channel184 // Need modify for 11b/g
+    0x00000100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Channel184 // Need modify for 11b/g
+    0x451FE200+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Need modify for 11b/g
+    0x5FDFA300+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Need modify for 11b/g
+    0x67F78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // 11a    // Need modify for 11b/g
+    0x853F5500+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Need modify for 11b/g, RoberYu:20050113
+    0x56AF3600+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW,
+    0xCE020700+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Need modify for 11b/g
+    0x6EBC0800+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x221BB900+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW,
+    0xE0600A00+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Need modify for 11b/g
+    0x08031B00+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // init 0x080B1B00 => 0x080F1B00 for 3 wire control TxGain(D10)
+    0x00147C00+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Need modify for 11b/g
+    0xFFFFFD00+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x00000E00+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW,
+    0x12BACF00+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW  // Need modify for 11b/g
+    };
+
+
+const DWORD dwAL7230ChannelTable0[CB_MAX_CHANNEL] = {
+    0x00379000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  1, Tf = 2412MHz
+    0x00379000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  2, Tf = 2417MHz
+    0x00379000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  3, Tf = 2422MHz
+    0x00379000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  4, Tf = 2427MHz
+    0x0037A000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  5, Tf = 2432MHz
+    0x0037A000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  6, Tf = 2437MHz
+    0x0037A000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  7, Tf = 2442MHz
+    0x0037A000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  8, Tf = 2447MHz //RobertYu: 20050218, update for APNode 0.49
+    0x0037B000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  9, Tf = 2452MHz //RobertYu: 20050218, update for APNode 0.49
+    0x0037B000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 10, Tf = 2457MHz //RobertYu: 20050218, update for APNode 0.49
+    0x0037B000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 11, Tf = 2462MHz //RobertYu: 20050218, update for APNode 0.49
+    0x0037B000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 12, Tf = 2467MHz //RobertYu: 20050218, update for APNode 0.49
+    0x0037C000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 13, Tf = 2472MHz //RobertYu: 20050218, update for APNode 0.49
+    0x0037C000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 14, Tf = 2484MHz
+
+    // 4.9G => Ch 183, 184, 185, 187, 188, 189, 192, 196  (Value:15 ~ 22)
+    0x0FF52000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 183, Tf = 4915MHz (15)
+    0x0FF52000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 184, Tf = 4920MHz (16)
+    0x0FF52000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 185, Tf = 4925MHz (17)
+    0x0FF52000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 187, Tf = 4935MHz (18)
+    0x0FF52000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 188, Tf = 4940MHz (19)
+    0x0FF52000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 189, Tf = 4945MHz (20)
+    0x0FF53000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 192, Tf = 4960MHz (21)
+    0x0FF53000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 196, Tf = 4980MHz (22)
+
+    // 5G => Ch 7, 8, 9, 11, 12, 16, 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64,
+    // 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165  (Value 23 ~ 56)
+
+    0x0FF54000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =   7, Tf = 5035MHz (23)
+    0x0FF54000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =   8, Tf = 5040MHz (24)
+    0x0FF54000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =   9, Tf = 5045MHz (25)
+    0x0FF54000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  11, Tf = 5055MHz (26)
+    0x0FF54000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  12, Tf = 5060MHz (27)
+    0x0FF55000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  16, Tf = 5080MHz (28)
+    0x0FF56000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  34, Tf = 5170MHz (29)
+    0x0FF56000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  36, Tf = 5180MHz (30)
+    0x0FF57000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  38, Tf = 5190MHz (31) //RobertYu: 20050218, update for APNode 0.49
+    0x0FF57000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  40, Tf = 5200MHz (32)
+    0x0FF57000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  42, Tf = 5210MHz (33)
+    0x0FF57000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  44, Tf = 5220MHz (34)
+    0x0FF57000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  46, Tf = 5230MHz (35)
+    0x0FF57000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  48, Tf = 5240MHz (36)
+    0x0FF58000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  52, Tf = 5260MHz (37)
+    0x0FF58000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  56, Tf = 5280MHz (38)
+    0x0FF58000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  60, Tf = 5300MHz (39)
+    0x0FF59000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  64, Tf = 5320MHz (40)
+
+    0x0FF5C000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 100, Tf = 5500MHz (41)
+    0x0FF5C000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 104, Tf = 5520MHz (42)
+    0x0FF5C000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 108, Tf = 5540MHz (43)
+    0x0FF5D000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 112, Tf = 5560MHz (44)
+    0x0FF5D000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 116, Tf = 5580MHz (45)
+    0x0FF5D000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 120, Tf = 5600MHz (46)
+    0x0FF5E000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 124, Tf = 5620MHz (47)
+    0x0FF5E000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 128, Tf = 5640MHz (48)
+    0x0FF5E000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 132, Tf = 5660MHz (49)
+    0x0FF5F000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 136, Tf = 5680MHz (50)
+    0x0FF5F000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 140, Tf = 5700MHz (51)
+    0x0FF60000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 149, Tf = 5745MHz (52)
+    0x0FF60000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 153, Tf = 5765MHz (53)
+    0x0FF60000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 157, Tf = 5785MHz (54)
+    0x0FF61000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 161, Tf = 5805MHz (55)
+    0x0FF61000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW  // channel = 165, Tf = 5825MHz (56)
+    };
+
+const DWORD dwAL7230ChannelTable1[CB_MAX_CHANNEL] = {
+    0x13333100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  1, Tf = 2412MHz
+    0x1B333100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  2, Tf = 2417MHz
+    0x03333100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  3, Tf = 2422MHz
+    0x0B333100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  4, Tf = 2427MHz
+    0x13333100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  5, Tf = 2432MHz
+    0x1B333100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  6, Tf = 2437MHz
+    0x03333100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  7, Tf = 2442MHz
+    0x0B333100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  8, Tf = 2447MHz
+    0x13333100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  9, Tf = 2452MHz
+    0x1B333100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 10, Tf = 2457MHz
+    0x03333100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 11, Tf = 2462MHz
+    0x0B333100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 12, Tf = 2467MHz
+    0x13333100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 13, Tf = 2472MHz
+    0x06666100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 14, Tf = 2484MHz
+
+    // 4.9G => Ch 183, 184, 185, 187, 188, 189, 192, 196  (Value:15 ~ 22)
+    0x1D555100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 183, Tf = 4915MHz (15)
+    0x00000100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 184, Tf = 4920MHz (16)
+    0x02AAA100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 185, Tf = 4925MHz (17)
+    0x08000100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 187, Tf = 4935MHz (18)
+    0x0AAAA100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 188, Tf = 4940MHz (19)
+    0x0D555100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 189, Tf = 4945MHz (20)
+    0x15555100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 192, Tf = 4960MHz (21)
+    0x00000100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 196, Tf = 4980MHz (22)
+
+    // 5G => Ch 7, 8, 9, 11, 12, 16, 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64,
+    // 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165  (Value 23 ~ 56)
+    0x1D555100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =   7, Tf = 5035MHz (23)
+    0x00000100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =   8, Tf = 5040MHz (24)
+    0x02AAA100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =   9, Tf = 5045MHz (25)
+    0x08000100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  11, Tf = 5055MHz (26)
+    0x0AAAA100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  12, Tf = 5060MHz (27)
+    0x15555100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  16, Tf = 5080MHz (28)
+    0x05555100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  34, Tf = 5170MHz (29)
+    0x0AAAA100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  36, Tf = 5180MHz (30)
+    0x10000100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  38, Tf = 5190MHz (31)
+    0x15555100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  40, Tf = 5200MHz (32)
+    0x1AAAA100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  42, Tf = 5210MHz (33)
+    0x00000100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  44, Tf = 5220MHz (34)
+    0x05555100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  46, Tf = 5230MHz (35)
+    0x0AAAA100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  48, Tf = 5240MHz (36)
+    0x15555100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  52, Tf = 5260MHz (37)
+    0x00000100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  56, Tf = 5280MHz (38)
+    0x0AAAA100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  60, Tf = 5300MHz (39)
+    0x15555100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  64, Tf = 5320MHz (40)
+    0x15555100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 100, Tf = 5500MHz (41)
+    0x00000100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 104, Tf = 5520MHz (42)
+    0x0AAAA100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 108, Tf = 5540MHz (43)
+    0x15555100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 112, Tf = 5560MHz (44)
+    0x00000100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 116, Tf = 5580MHz (45)
+    0x0AAAA100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 120, Tf = 5600MHz (46)
+    0x15555100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 124, Tf = 5620MHz (47)
+    0x00000100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 128, Tf = 5640MHz (48)
+    0x0AAAA100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 132, Tf = 5660MHz (49)
+    0x15555100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 136, Tf = 5680MHz (50)
+    0x00000100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 140, Tf = 5700MHz (51)
+    0x18000100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 149, Tf = 5745MHz (52)
+    0x02AAA100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 153, Tf = 5765MHz (53)
+    0x0D555100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 157, Tf = 5785MHz (54)
+    0x18000100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 161, Tf = 5805MHz (55)
+    0x02AAA100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW  // channel = 165, Tf = 5825MHz (56)
+    };
+
+const DWORD dwAL7230ChannelTable2[CB_MAX_CHANNEL] = {
+    0x7FD78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  1, Tf = 2412MHz
+    0x7FD78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  2, Tf = 2417MHz
+    0x7FD78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  3, Tf = 2422MHz
+    0x7FD78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  4, Tf = 2427MHz
+    0x7FD78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  5, Tf = 2432MHz
+    0x7FD78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  6, Tf = 2437MHz
+    0x7FD78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  7, Tf = 2442MHz
+    0x7FD78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  8, Tf = 2447MHz
+    0x7FD78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  9, Tf = 2452MHz
+    0x7FD78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 10, Tf = 2457MHz
+    0x7FD78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 11, Tf = 2462MHz
+    0x7FD78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 12, Tf = 2467MHz
+    0x7FD78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 13, Tf = 2472MHz
+    0x7FD78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 14, Tf = 2484MHz
+
+    // 4.9G => Ch 183, 184, 185, 187, 188, 189, 192, 196  (Value:15 ~ 22)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 183, Tf = 4915MHz (15)
+    0x67D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 184, Tf = 4920MHz (16)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 185, Tf = 4925MHz (17)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 187, Tf = 4935MHz (18)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 188, Tf = 4940MHz (19)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 189, Tf = 4945MHz (20)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 192, Tf = 4960MHz (21)
+    0x67D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 196, Tf = 4980MHz (22)
+
+    // 5G => Ch 7, 8, 9, 11, 12, 16, 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64,
+    // 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165  (Value 23 ~ 56)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =   7, Tf = 5035MHz (23)
+    0x67D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =   8, Tf = 5040MHz (24)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =   9, Tf = 5045MHz (25)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  11, Tf = 5055MHz (26)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  12, Tf = 5060MHz (27)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  16, Tf = 5080MHz (28)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  34, Tf = 5170MHz (29)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  36, Tf = 5180MHz (30)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  38, Tf = 5190MHz (31)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  40, Tf = 5200MHz (32)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  42, Tf = 5210MHz (33)
+    0x67D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  44, Tf = 5220MHz (34)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  46, Tf = 5230MHz (35)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  48, Tf = 5240MHz (36)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  52, Tf = 5260MHz (37)
+    0x67D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  56, Tf = 5280MHz (38)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  60, Tf = 5300MHz (39)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  64, Tf = 5320MHz (40)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 100, Tf = 5500MHz (41)
+    0x67D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 104, Tf = 5520MHz (42)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 108, Tf = 5540MHz (43)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 112, Tf = 5560MHz (44)
+    0x67D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 116, Tf = 5580MHz (45)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 120, Tf = 5600MHz (46)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 124, Tf = 5620MHz (47)
+    0x67D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 128, Tf = 5640MHz (48)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 132, Tf = 5660MHz (49)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 136, Tf = 5680MHz (50)
+    0x67D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 140, Tf = 5700MHz (51)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 149, Tf = 5745MHz (52)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 153, Tf = 5765MHz (53)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 157, Tf = 5785MHz (54)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 161, Tf = 5805MHz (55)
+    0x77D78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW  // channel = 165, Tf = 5825MHz (56)
+    };
+//}} RobertYu
+
+
+
+
+/*---------------------  Static Functions  --------------------------*/
+
+
+
+
+/*
+ * Description: AIROHA IFRF chip init function
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - I/O base address
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if succeeded; FALSE if failed.
+ *
+ */
+BOOL s_bAL7230Init (DWORD_PTR dwIoBase)
+{
+    int     ii;
+    BOOL    bResult;
+
+    bResult = TRUE;
+
+    //3-wire control for normal mode
+    VNSvOutPortB(dwIoBase + MAC_REG_SOFTPWRCTL, 0);
+
+    MACvWordRegBitsOn(dwIoBase, MAC_REG_SOFTPWRCTL, (SOFTPWRCTL_SWPECTI  |
+                                                     SOFTPWRCTL_TXPEINV));
+    BBvPowerSaveModeOFF(dwIoBase); //RobertYu:20050106, have DC value for Calibration
+
+    for (ii = 0; ii < CB_AL7230_INIT_SEQ; ii++)
+        bResult &= IFRFbWriteEmbeded(dwIoBase, dwAL7230InitTable[ii]);
+
+    // PLL On
+    MACvWordRegBitsOn(dwIoBase, MAC_REG_SOFTPWRCTL, SOFTPWRCTL_SWPE3);
+
+    //Calibration
+    MACvTimer0MicroSDelay(dwIoBase, 150);//150us
+    bResult &= IFRFbWriteEmbeded(dwIoBase, (0x9ABA8F00+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW)); //TXDCOC:active, RCK:diable
+    MACvTimer0MicroSDelay(dwIoBase, 30);//30us
+    bResult &= IFRFbWriteEmbeded(dwIoBase, (0x3ABA8F00+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW)); //TXDCOC:diable, RCK:active
+    MACvTimer0MicroSDelay(dwIoBase, 30);//30us
+    bResult &= IFRFbWriteEmbeded(dwIoBase, dwAL7230InitTable[CB_AL7230_INIT_SEQ-1]); //TXDCOC:diable, RCK:diable
+
+    MACvWordRegBitsOn(dwIoBase, MAC_REG_SOFTPWRCTL, (SOFTPWRCTL_SWPE3    |
+                                                     SOFTPWRCTL_SWPE2    |
+                                                     SOFTPWRCTL_SWPECTI  |
+                                                     SOFTPWRCTL_TXPEINV));
+
+    BBvPowerSaveModeON(dwIoBase); // RobertYu:20050106
+
+    // PE1: TX_ON, PE2: RX_ON, PE3: PLLON
+    //3-wire control for power saving mode
+    VNSvOutPortB(dwIoBase + MAC_REG_PSPWRSIG, (PSSIG_WPE3 | PSSIG_WPE2)); //1100 0000
+
+    return bResult;
+}
+
+// Need to Pull PLLON low when writing channel registers through 3-wire interface
+BOOL s_bAL7230SelectChannel (DWORD_PTR dwIoBase, BYTE byChannel)
+{
+    BOOL    bResult;
+
+    bResult = TRUE;
+
+    // PLLON Off
+    MACvWordRegBitsOff(dwIoBase, MAC_REG_SOFTPWRCTL, SOFTPWRCTL_SWPE3);
+
+    bResult &= IFRFbWriteEmbeded (dwIoBase, dwAL7230ChannelTable0[byChannel-1]); //Reg0
+    bResult &= IFRFbWriteEmbeded (dwIoBase, dwAL7230ChannelTable1[byChannel-1]); //Reg1
+    bResult &= IFRFbWriteEmbeded (dwIoBase, dwAL7230ChannelTable2[byChannel-1]); //Reg4
+
+    // PLLOn On
+    MACvWordRegBitsOn(dwIoBase, MAC_REG_SOFTPWRCTL, SOFTPWRCTL_SWPE3);
+
+    // Set Channel[7] = 0 to tell H/W channel is changing now.
+    VNSvOutPortB(dwIoBase + MAC_REG_CHANNEL, (byChannel & 0x7F));
+    MACvTimer0MicroSDelay(dwIoBase, SWITCH_CHANNEL_DELAY_AL7230);
+    // Set Channel[7] = 1 to tell H/W channel change is done.
+    VNSvOutPortB(dwIoBase + MAC_REG_CHANNEL, (byChannel | 0x80));
+
+    return bResult;
+}
+
+/*
+ * Description: Select channel with UW2452 chip
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - I/O base address
+ *      uChannel    - Channel number
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if succeeded; FALSE if failed.
+ *
+ */
+
+
+//{{ RobertYu: 20041210
+/*
+ * Description: UW2452 IFRF chip init function
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - I/O base address
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if succeeded; FALSE if failed.
+ *
+ */
+
+
+
+//}} RobertYu
+////////////////////////////////////////////////////////////////////////////////
+
+/*
+ * Description: VT3226 IFRF chip init function
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - I/O base address
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if succeeded; FALSE if failed.
+ *
+ */
+
+/*
+ * Description: Select channel with VT3226 chip
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - I/O base address
+ *      uChannel    - Channel number
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if succeeded; FALSE if failed.
+ *
+ */
+
+
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+
+/*
+ * Description: Write to IF/RF, by embeded programming
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - I/O base address
+ *      dwData      - data to write
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if succeeded; FALSE if failed.
+ *
+ */
+BOOL IFRFbWriteEmbeded (DWORD_PTR dwIoBase, DWORD dwData)
+{
+    WORD    ww;
+    DWORD   dwValue;
+
+    VNSvOutPortD(dwIoBase + MAC_REG_IFREGCTL, dwData);
+
+    // W_MAX_TIMEOUT is the timeout period
+    for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+        VNSvInPortD(dwIoBase + MAC_REG_IFREGCTL, &dwValue);
+        if (BITbIsBitOn(dwValue, IFREGCTL_DONE))
+            break;
+    }
+
+    if (ww == W_MAX_TIMEOUT) {
+//        DBG_PORT80_ALWAYS(0x32);
+        return FALSE;
+    }
+    return TRUE;
+}
+
+
+
+/*
+ * Description: RFMD RF2959 IFRF chip init function
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - I/O base address
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if succeeded; FALSE if failed.
+ *
+ */
+
+/*
+ * Description: Select channel with RFMD 2959 chip
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - I/O base address
+ *      uChannel    - Channel number
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if succeeded; FALSE if failed.
+ *
+ */
+
+/*
+ * Description: AIROHA IFRF chip init function
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - I/O base address
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if succeeded; FALSE if failed.
+ *
+ */
+BOOL RFbAL2230Init (DWORD_PTR dwIoBase)
+{
+    int     ii;
+    BOOL    bResult;
+
+    bResult = TRUE;
+
+    //3-wire control for normal mode
+    VNSvOutPortB(dwIoBase + MAC_REG_SOFTPWRCTL, 0);
+
+    MACvWordRegBitsOn(dwIoBase, MAC_REG_SOFTPWRCTL, (SOFTPWRCTL_SWPECTI  |
+                                                     SOFTPWRCTL_TXPEINV));
+//2008-8-21 chester <add>
+    // PLL  Off
+
+    MACvWordRegBitsOff(dwIoBase, MAC_REG_SOFTPWRCTL, SOFTPWRCTL_SWPE3);
+
+
+
+    //patch abnormal AL2230 frequency output
+//2008-8-21 chester <add>
+    IFRFbWriteEmbeded(dwIoBase, (0x07168700+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW));
+
+
+    for (ii = 0; ii < CB_AL2230_INIT_SEQ; ii++)
+        bResult &= IFRFbWriteEmbeded(dwIoBase, dwAL2230InitTable[ii]);
+//2008-8-21 chester <add>
+MACvTimer0MicroSDelay(dwIoBase, 30); //delay 30 us
+
+    // PLL On
+    MACvWordRegBitsOn(dwIoBase, MAC_REG_SOFTPWRCTL, SOFTPWRCTL_SWPE3);
+
+    MACvTimer0MicroSDelay(dwIoBase, 150);//150us
+    bResult &= IFRFbWriteEmbeded(dwIoBase, (0x00d80f00+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW));
+    MACvTimer0MicroSDelay(dwIoBase, 30);//30us
+    bResult &= IFRFbWriteEmbeded(dwIoBase, (0x00780f00+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW));
+    MACvTimer0MicroSDelay(dwIoBase, 30);//30us
+    bResult &= IFRFbWriteEmbeded(dwIoBase, dwAL2230InitTable[CB_AL2230_INIT_SEQ-1]);
+
+    MACvWordRegBitsOn(dwIoBase, MAC_REG_SOFTPWRCTL, (SOFTPWRCTL_SWPE3    |
+                                                     SOFTPWRCTL_SWPE2    |
+                                                     SOFTPWRCTL_SWPECTI  |
+                                                     SOFTPWRCTL_TXPEINV));
+
+    //3-wire control for power saving mode
+    VNSvOutPortB(dwIoBase + MAC_REG_PSPWRSIG, (PSSIG_WPE3 | PSSIG_WPE2)); //1100 0000
+
+    return bResult;
+}
+
+BOOL RFbAL2230SelectChannel (DWORD_PTR dwIoBase, BYTE byChannel)
+{
+    BOOL    bResult;
+
+    bResult = TRUE;
+
+    bResult &= IFRFbWriteEmbeded (dwIoBase, dwAL2230ChannelTable0[byChannel-1]);
+    bResult &= IFRFbWriteEmbeded (dwIoBase, dwAL2230ChannelTable1[byChannel-1]);
+
+    // Set Channel[7] = 0 to tell H/W channel is changing now.
+    VNSvOutPortB(dwIoBase + MAC_REG_CHANNEL, (byChannel & 0x7F));
+    MACvTimer0MicroSDelay(dwIoBase, SWITCH_CHANNEL_DELAY_AL2230);
+    // Set Channel[7] = 1 to tell H/W channel change is done.
+    VNSvOutPortB(dwIoBase + MAC_REG_CHANNEL, (byChannel | 0x80));
+
+    return bResult;
+}
+
+/*
+ * Description: UW2451 IFRF chip init function
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - I/O base address
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if succeeded; FALSE if failed.
+ *
+ */
+
+
+/*
+ * Description: Select channel with UW2451 chip
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - I/O base address
+ *      uChannel    - Channel number
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if succeeded; FALSE if failed.
+ *
+ */
+
+/*
+ * Description: Set sleep mode to UW2451 chip
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - I/O base address
+ *      uChannel    - Channel number
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if succeeded; FALSE if failed.
+ *
+ */
+
+/*
+ * Description: RF init function
+ *
+ * Parameters:
+ *  In:
+ *      byBBType
+ *      byRFType
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if succeeded; FALSE if failed.
+ *
+ */
+BOOL RFbInit (
+    IN  PSDevice  pDevice
+    )
+{
+BOOL    bResult = TRUE;
+    switch (pDevice->byRFType) {
+        case RF_AIROHA :
+        case RF_AL2230S:
+            pDevice->byMaxPwrLevel = AL2230_PWR_IDX_LEN;
+            bResult = RFbAL2230Init(pDevice->PortOffset);
+            break;
+        case RF_AIROHA7230 :
+            pDevice->byMaxPwrLevel = AL7230_PWR_IDX_LEN;
+            bResult = s_bAL7230Init(pDevice->PortOffset);
+            break;
+        case RF_NOTHING :
+            bResult = TRUE;
+            break;
+        default :
+            bResult = FALSE;
+            break;
+    }
+    return bResult;
+}
+
+/*
+ * Description: RF ShutDown function
+ *
+ * Parameters:
+ *  In:
+ *      byBBType
+ *      byRFType
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if succeeded; FALSE if failed.
+ *
+ */
+BOOL RFbShutDown (
+    IN  PSDevice  pDevice
+    )
+{
+BOOL    bResult = TRUE;
+
+    switch (pDevice->byRFType) {
+        case RF_AIROHA7230 :
+            bResult = IFRFbWriteEmbeded (pDevice->PortOffset, 0x1ABAEF00+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW);
+            break;
+        default :
+            bResult = TRUE;
+            break;
+    }
+    return bResult;
+}
+
+/*
+ * Description: Select channel
+ *
+ * Parameters:
+ *  In:
+ *      byRFType
+ *      byChannel    - Channel number
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if succeeded; FALSE if failed.
+ *
+ */
+BOOL RFbSelectChannel (DWORD_PTR dwIoBase, BYTE byRFType, BYTE byChannel)
+{
+BOOL    bResult = TRUE;
+    switch (byRFType) {
+
+        case RF_AIROHA :
+        case RF_AL2230S:
+            bResult = RFbAL2230SelectChannel(dwIoBase, byChannel);
+            break;
+        //{{ RobertYu: 20050104
+        case RF_AIROHA7230 :
+            bResult = s_bAL7230SelectChannel(dwIoBase, byChannel);
+            break;
+        //}} RobertYu
+        case RF_NOTHING :
+            bResult = TRUE;
+            break;
+        default:
+            bResult = FALSE;
+            break;
+    }
+    return bResult;
+}
+
+/*
+ * Description: Write WakeProgSyn
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase    - I/O base address
+ *      uChannel    - channel number
+ *      bySleepCnt  - SleepProgSyn count
+ *
+ * Return Value: None.
+ *
+ */
+BOOL RFvWriteWakeProgSyn (DWORD_PTR dwIoBase, BYTE byRFType, UINT uChannel)
+{
+    int   ii;
+    BYTE  byInitCount = 0;
+    BYTE  bySleepCount = 0;
+
+    VNSvOutPortW(dwIoBase + MAC_REG_MISCFFNDEX, 0);
+    switch (byRFType) {
+        case RF_AIROHA:
+        case RF_AL2230S:
+
+            if (uChannel > CB_MAX_CHANNEL_24G)
+                return FALSE;
+
+            byInitCount = CB_AL2230_INIT_SEQ + 2; // Init Reg + Channel Reg (2)
+            bySleepCount = 0;
+            if (byInitCount > (MISCFIFO_SYNDATASIZE - bySleepCount)) {
+                return FALSE;
+            }
+
+            for (ii = 0; ii < CB_AL2230_INIT_SEQ; ii++ ) {
+                MACvSetMISCFifo(dwIoBase, (WORD)(MISCFIFO_SYNDATA_IDX + ii), dwAL2230InitTable[ii]);
+            }
+            MACvSetMISCFifo(dwIoBase, (WORD)(MISCFIFO_SYNDATA_IDX + ii), dwAL2230ChannelTable0[uChannel-1]);
+            ii ++;
+            MACvSetMISCFifo(dwIoBase, (WORD)(MISCFIFO_SYNDATA_IDX + ii), dwAL2230ChannelTable1[uChannel-1]);
+            break;
+
+        //{{ RobertYu: 20050104
+        // Need to check, PLLON need to be low for channel setting
+        case RF_AIROHA7230:
+            byInitCount = CB_AL7230_INIT_SEQ + 3; // Init Reg + Channel Reg (3)
+            bySleepCount = 0;
+            if (byInitCount > (MISCFIFO_SYNDATASIZE - bySleepCount)) {
+                return FALSE;
+            }
+
+            if (uChannel <= CB_MAX_CHANNEL_24G)
+            {
+                for (ii = 0; ii < CB_AL7230_INIT_SEQ; ii++ ) {
+                    MACvSetMISCFifo(dwIoBase, (WORD)(MISCFIFO_SYNDATA_IDX + ii), dwAL7230InitTable[ii]);
+                }
+            }
+            else
+            {
+                for (ii = 0; ii < CB_AL7230_INIT_SEQ; ii++ ) {
+                    MACvSetMISCFifo(dwIoBase, (WORD)(MISCFIFO_SYNDATA_IDX + ii), dwAL7230InitTableAMode[ii]);
+                }
+            }
+
+            MACvSetMISCFifo(dwIoBase, (WORD)(MISCFIFO_SYNDATA_IDX + ii), dwAL7230ChannelTable0[uChannel-1]);
+            ii ++;
+            MACvSetMISCFifo(dwIoBase, (WORD)(MISCFIFO_SYNDATA_IDX + ii), dwAL7230ChannelTable1[uChannel-1]);
+            ii ++;
+            MACvSetMISCFifo(dwIoBase, (WORD)(MISCFIFO_SYNDATA_IDX + ii), dwAL7230ChannelTable2[uChannel-1]);
+            break;
+        //}} RobertYu
+
+        case RF_NOTHING :
+            return TRUE;
+            break;
+
+        default:
+            return FALSE;
+            break;
+    }
+
+    MACvSetMISCFifo(dwIoBase, MISCFIFO_SYNINFO_IDX, (DWORD)MAKEWORD(bySleepCount, byInitCount));
+
+    return TRUE;
+}
+
+/*
+ * Description: Set Tx power
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase       - I/O base address
+ *      dwRFPowerTable - RF Tx Power Setting
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if succeeded; FALSE if failed.
+ *
+ */
+BOOL RFbSetPower (
+    IN  PSDevice  pDevice,
+    IN  UINT      uRATE,
+    IN  UINT      uCH
+    )
+{
+BOOL    bResult = TRUE;
+BYTE    byPwr = 0;
+BYTE    byDec = 0;
+BYTE    byPwrdBm = 0;
+
+    if (pDevice->dwDiagRefCount != 0) {
+        return TRUE;
+    }
+    if ((uCH < 1) || (uCH > CB_MAX_CHANNEL)) {
+        return FALSE;
+    }
+
+    switch (uRATE) {
+    case RATE_1M:
+    case RATE_2M:
+    case RATE_5M:
+    case RATE_11M:
+        byPwr = pDevice->abyCCKPwrTbl[uCH];
+        byPwrdBm = pDevice->abyCCKDefaultPwr[uCH];
+//PLICE_DEBUG->
+	//byPwr+=5;
+//PLICE_DEBUG <-
+
+//printk("Rate <11:byPwr is %d\n",byPwr);
+		break;
+    case RATE_6M:
+    case RATE_9M:
+    case RATE_18M:
+        byPwr = pDevice->abyOFDMPwrTbl[uCH];
+        if (pDevice->byRFType == RF_UW2452) {
+            byDec = byPwr + 14;
+        } else {
+            byDec = byPwr + 10;
+        }
+        if (byDec >= pDevice->byMaxPwrLevel) {
+            byDec = pDevice->byMaxPwrLevel-1;
+        }
+        if (pDevice->byRFType == RF_UW2452) {
+            byPwrdBm = byDec - byPwr;
+            byPwrdBm /= 3;
+        } else {
+            byPwrdBm = byDec - byPwr;
+            byPwrdBm >>= 1;
+        }
+        byPwrdBm += pDevice->abyOFDMDefaultPwr[uCH];
+        byPwr = byDec;
+//PLICE_DEBUG->
+	//byPwr+=5;
+//PLICE_DEBUG<-
+
+//printk("Rate <24:byPwr is %d\n",byPwr);
+		break;
+    case RATE_24M:
+    case RATE_36M:
+    case RATE_48M:
+    case RATE_54M:
+        byPwr = pDevice->abyOFDMPwrTbl[uCH];
+        byPwrdBm = pDevice->abyOFDMDefaultPwr[uCH];
+//PLICE_DEBUG->
+	//byPwr+=5;
+//PLICE_DEBUG<-
+//printk("Rate < 54:byPwr is %d\n",byPwr);
+		break;
+    }
+
+#if 0
+
+    // 802.11h TPC
+    if (pDevice->bLinkPass == TRUE) {
+        // do not over local constraint
+        if (byPwrdBm > pDevice->abyLocalPwr[uCH]) {
+            pDevice->byCurPwrdBm = pDevice->abyLocalPwr[uCH];
+            byDec = byPwrdBm - pDevice->abyLocalPwr[uCH];
+            if (pDevice->byRFType == RF_UW2452) {
+                byDec *= 3;
+            } else {
+                byDec <<= 1;
+            }
+            if (byPwr > byDec) {
+                byPwr -= byDec;
+            } else {
+                byPwr = 0;
+            }
+        } else {
+            pDevice->byCurPwrdBm = byPwrdBm;
+        }
+    } else {
+        // do not over regulatory constraint
+        if (byPwrdBm > pDevice->abyRegPwr[uCH]) {
+            pDevice->byCurPwrdBm = pDevice->abyRegPwr[uCH];
+            byDec = byPwrdBm - pDevice->abyRegPwr[uCH];
+            if (pDevice->byRFType == RF_UW2452) {
+                byDec *= 3;
+            } else {
+                byDec <<= 1;
+            }
+            if (byPwr > byDec) {
+                byPwr -= byDec;
+            } else {
+                byPwr = 0;
+            }
+        } else {
+            pDevice->byCurPwrdBm = byPwrdBm;
+        }
+    }
+#endif
+
+//    if (pDevice->byLocalID <= REV_ID_VT3253_B1) {
+    if (pDevice->byCurPwr == byPwr) {
+        return TRUE;
+    }
+    bResult = RFbRawSetPower(pDevice, byPwr, uRATE);
+//    }
+    if (bResult == TRUE) {
+       pDevice->byCurPwr = byPwr;
+    }
+    return bResult;
+}
+
+/*
+ * Description: Set Tx power
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase       - I/O base address
+ *      dwRFPowerTable - RF Tx Power Setting
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if succeeded; FALSE if failed.
+ *
+ */
+
+BOOL RFbRawSetPower (
+    IN  PSDevice  pDevice,
+    IN  BYTE      byPwr,
+    IN  UINT      uRATE
+    )
+{
+BOOL    bResult = TRUE;
+DWORD   dwMax7230Pwr = 0;
+
+    if (byPwr >=  pDevice->byMaxPwrLevel) {
+        return (FALSE);
+    }
+    switch (pDevice->byRFType) {
+
+        case RF_AIROHA :
+            bResult &= IFRFbWriteEmbeded(pDevice->PortOffset, dwAL2230PowerTable[byPwr]);
+            if (uRATE <= RATE_11M) {
+                bResult &= IFRFbWriteEmbeded(pDevice->PortOffset, 0x0001B400+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW);
+            } else {
+                bResult &= IFRFbWriteEmbeded(pDevice->PortOffset, 0x0005A400+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW);
+            }
+            break;
+
+
+        case RF_AL2230S :
+            bResult &= IFRFbWriteEmbeded(pDevice->PortOffset, dwAL2230PowerTable[byPwr]);
+            if (uRATE <= RATE_11M) {
+                bResult &= IFRFbWriteEmbeded(pDevice->PortOffset, 0x040C1400+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW);
+                bResult &= IFRFbWriteEmbeded(pDevice->PortOffset, 0x00299B00+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW);
+            }else {
+                bResult &= IFRFbWriteEmbeded(pDevice->PortOffset, 0x0005A400+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW);
+                bResult &= IFRFbWriteEmbeded(pDevice->PortOffset, 0x00099B00+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW);
+            }
+
+            break;
+
+        case RF_AIROHA7230:
+            //  0x080F1B00 for 3 wire control TxGain(D10) and 0x31 as TX Gain value
+            dwMax7230Pwr = 0x080C0B00 | ( (byPwr) << 12 ) |
+                           (BY_AL7230_REG_LEN << 3 )  | IFREGCTL_REGW;
+
+            bResult &= IFRFbWriteEmbeded(pDevice->PortOffset, dwMax7230Pwr);
+            break;
+
+
+        default :
+            break;
+    }
+    return bResult;
+}
+
+/*+
+ *
+ * Routine Description:
+ *     Translate RSSI to dBm
+ *
+ * Parameters:
+ *  In:
+ *      pDevice         - The adapter to be translated
+ *      byCurrRSSI      - RSSI to be translated
+ *  Out:
+ *      pdwdbm          - Translated dbm number
+ *
+ * Return Value: none
+ *
+-*/
+VOID
+RFvRSSITodBm (
+    IN  PSDevice pDevice,
+    IN  BYTE     byCurrRSSI,
+    OUT PLONG    pldBm
+    )
+{
+    BYTE byIdx = (((byCurrRSSI & 0xC0) >> 6) & 0x03);
+    LONG b = (byCurrRSSI & 0x3F);
+    LONG a = 0;
+    BYTE abyAIROHARF[4] = {0, 18, 0, 40};
+
+    switch (pDevice->byRFType) {
+        case RF_AIROHA:
+        case RF_AL2230S:
+        case RF_AIROHA7230: //RobertYu: 20040104
+            a = abyAIROHARF[byIdx];
+            break;
+        default:
+            break;
+    }
+
+    *pldBm = -1 * (a + b * 2);
+}
+
+////////////////////////////////////////////////////////////////////////////////
+//{{ RobertYu: 20050104
+
+
+// Post processing for the 11b/g and 11a.
+// for save time on changing Reg2,3,5,7,10,12,15
+BOOL RFbAL7230SelectChannelPostProcess (DWORD_PTR dwIoBase, BYTE byOldChannel, BYTE byNewChannel)
+{
+    BOOL    bResult;
+
+    bResult = TRUE;
+
+    // if change between 11 b/g and 11a need to update the following register
+    // Channel Index 1~14
+
+    if( (byOldChannel <= CB_MAX_CHANNEL_24G) && (byNewChannel > CB_MAX_CHANNEL_24G) )
+    {
+        // Change from 2.4G to 5G
+        bResult &= IFRFbWriteEmbeded(dwIoBase, dwAL7230InitTableAMode[2]); //Reg2
+        bResult &= IFRFbWriteEmbeded(dwIoBase, dwAL7230InitTableAMode[3]); //Reg3
+        bResult &= IFRFbWriteEmbeded(dwIoBase, dwAL7230InitTableAMode[5]); //Reg5
+        bResult &= IFRFbWriteEmbeded(dwIoBase, dwAL7230InitTableAMode[7]); //Reg7
+        bResult &= IFRFbWriteEmbeded(dwIoBase, dwAL7230InitTableAMode[10]);//Reg10
+        bResult &= IFRFbWriteEmbeded(dwIoBase, dwAL7230InitTableAMode[12]);//Reg12
+        bResult &= IFRFbWriteEmbeded(dwIoBase, dwAL7230InitTableAMode[15]);//Reg15
+    }
+    else if( (byOldChannel > CB_MAX_CHANNEL_24G) && (byNewChannel <= CB_MAX_CHANNEL_24G) )
+    {
+        // change from 5G to 2.4G
+        bResult &= IFRFbWriteEmbeded(dwIoBase, dwAL7230InitTable[2]); //Reg2
+        bResult &= IFRFbWriteEmbeded(dwIoBase, dwAL7230InitTable[3]); //Reg3
+        bResult &= IFRFbWriteEmbeded(dwIoBase, dwAL7230InitTable[5]); //Reg5
+        bResult &= IFRFbWriteEmbeded(dwIoBase, dwAL7230InitTable[7]); //Reg7
+        bResult &= IFRFbWriteEmbeded(dwIoBase, dwAL7230InitTable[10]);//Reg10
+        bResult &= IFRFbWriteEmbeded(dwIoBase, dwAL7230InitTable[12]);//Reg12
+        bResult &= IFRFbWriteEmbeded(dwIoBase, dwAL7230InitTable[15]);//Reg15
+    }
+
+    return bResult;
+}
+
+
+//}} RobertYu
+////////////////////////////////////////////////////////////////////////////////
+
diff --git a/drivers/staging/vt6655/rf.h b/drivers/staging/vt6655/rf.h
new file mode 100644
index 00000000000..05fe17b2cfb
--- /dev/null
+++ b/drivers/staging/vt6655/rf.h
@@ -0,0 +1,118 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: rf.h
+ *
+ * Purpose:
+ *
+ * Author: Jerry Chen
+ *
+ * Date: Feb. 19, 2004
+ *
+ */
+
+
+#ifndef __RF_H__
+#define __RF_H__
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+#if !defined(__DEVICE_H__)
+#include "device.h"
+#endif
+/*---------------------  Export Definitions -------------------------*/
+//
+// Baseband RF pair definition in eeprom (Bits 6..0)
+//
+#define RF_RFMD2959             0x01
+#define RF_MAXIMAG              0x02
+#define RF_AIROHA               0x03
+
+//#define RF_GCT5103              0x04
+#define RF_UW2451               0x05
+#define RF_MAXIMG               0x06
+#define RF_MAXIM2829            0x07 // RobertYu: 20041118
+#define RF_UW2452               0x08 // RobertYu: 20041210
+#define RF_AIROHA7230           0x0a // RobertYu: 20050104
+#define RF_UW2453               0x0b
+
+#define RF_VT3226               0x09
+#define RF_AL2230S              0x0e
+
+#define RF_NOTHING              0x7E
+#define RF_EMU                  0x80
+#define RF_MASK                 0x7F
+
+#define ZONE_FCC                0
+#define ZONE_MKK1               1
+#define ZONE_ETSI               2
+#define ZONE_IC                 3
+#define ZONE_SPAIN              4
+#define ZONE_FRANCE             5
+#define ZONE_MKK                6
+#define ZONE_ISRAEL             7
+
+//[20050104] CB_MAXIM2829_CHANNEL_5G_HIGH, CB_UW2452_CHANNEL_5G_HIGH: 40==>41
+#define CB_MAXIM2829_CHANNEL_5G_HIGH    41 //Index41: channel = 100, Tf = 5500MHz, set the (A3:A0=0101) D6=1
+#define CB_UW2452_CHANNEL_5G_HIGH       41 //[20041210] Index41: channel = 100, Tf = 5500MHz, change VCO2->VCO3
+
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+#ifdef __cplusplus
+extern "C" {                            /* Assume C declarations for C++ */
+#endif /* __cplusplus */
+
+BOOL IFRFbWriteEmbeded(DWORD_PTR dwIoBase, DWORD dwData);
+BOOL RFbSelectChannel(DWORD_PTR dwIoBase, BYTE byRFType, BYTE byChannel);
+BOOL RFbInit (
+    IN  PSDevice  pDevice
+    );
+BOOL RFvWriteWakeProgSyn(DWORD_PTR dwIoBase, BYTE byRFType, UINT uChannel);
+BOOL RFbSetPower(PSDevice pDevice, UINT uRATE, UINT uCH);
+BOOL RFbRawSetPower(
+    IN  PSDevice  pDevice,
+    IN  BYTE      byPwr,
+    IN  UINT      uRATE
+    );
+
+VOID
+RFvRSSITodBm(
+    IN  PSDevice pDevice,
+    IN  BYTE     byCurrRSSI,
+    OUT PLONG    pldBm
+    );
+
+//{{ RobertYu: 20050104
+BOOL RFbAL7230SelectChannelPostProcess(DWORD_PTR dwIoBase, BYTE byOldChannel, BYTE byNewChannel);
+//}} RobertYu
+
+#ifdef __cplusplus
+}                                       /* End of extern "C" { */
+#endif /* __cplusplus */
+
+
+#endif // __RF_H__
+
+
+
diff --git a/drivers/staging/vt6655/rxtx.c b/drivers/staging/vt6655/rxtx.c
new file mode 100644
index 00000000000..c8a4a5533c7
--- /dev/null
+++ b/drivers/staging/vt6655/rxtx.c
@@ -0,0 +1,3269 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: rxtx.c
+ *
+ * Purpose: handle WMAC/802.3/802.11 rx & tx functions
+ *
+ * Author: Lyndon Chen
+ *
+ * Date: May 20, 2003
+ *
+ * Functions:
+ *      s_vGenerateTxParameter - Generate tx dma requried parameter.
+ *      vGenerateMACHeader - Translate 802.3 to 802.11 header
+ *      cbGetFragCount - Caculate fragement number count
+ *      csBeacon_xmit - beacon tx function
+ *      csMgmt_xmit - management tx function
+ *      s_cbFillTxBufHead - fulfill tx dma buffer header
+ *      s_uGetDataDuration - get tx data required duration
+ *      s_uFillDataHead- fulfill tx data duration header
+ *      s_uGetRTSCTSDuration- get rtx/cts requried duration
+ *      s_uGetRTSCTSRsvTime- get rts/cts reserved time
+ *      s_uGetTxRsvTime- get frame reserved time
+ *      s_vFillCTSHead- fulfill CTS ctl header
+ *      s_vFillFragParameter- Set fragement ctl parameter.
+ *      s_vFillRTSHead- fulfill RTS ctl header
+ *      s_vFillTxKey- fulfill tx encrypt key
+ *      s_vSWencryption- Software encrypt header
+ *      vDMA0_tx_80211- tx 802.11 frame via dma0
+ *      vGenerateFIFOHeader- Generate tx FIFO ctl header
+ *
+ * Revision History:
+ *
+ */
+
+
+#if !defined(__DEVICE_H__)
+#include "device.h"
+#endif
+#if !defined(__RXTX_H__)
+#include "rxtx.h"
+#endif
+#if !defined(__TETHER_H__)
+#include "tether.h"
+#endif
+#if !defined(__CARD_H__)
+#include "card.h"
+#endif
+#if !defined(__BSSDB_H__)
+#include "bssdb.h"
+#endif
+#if !defined(__MAC_H__)
+#include "mac.h"
+#endif
+#if !defined(__BASEBAND_H__)
+#include "baseband.h"
+#endif
+#if !defined(__UMEM_H__)
+#include "umem.h"
+#endif
+#if !defined(__MICHAEL_H__)
+#include "michael.h"
+#endif
+#if !defined(__TKIP_H__)
+#include "tkip.h"
+#endif
+#if !defined(__TCRC_H__)
+#include "tcrc.h"
+#endif
+#if !defined(__WCTL_H__)
+#include "wctl.h"
+#endif
+#if !defined(__WROUTE_H__)
+#include "wroute.h"
+#endif
+#if !defined(__TBIT_H__)
+#include "tbit.h"
+#endif
+#if !defined(__HOSTAP_H__)
+#include "hostap.h"
+#endif
+#if !defined(__RF_H__)
+#include "rf.h"
+#endif
+
+/*---------------------  Static Definitions -------------------------*/
+
+/*---------------------  Static Classes  ----------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+//static int          msglevel                =MSG_LEVEL_DEBUG;
+static int          msglevel                =MSG_LEVEL_INFO;
+
+#define	PLICE_DEBUG
+
+
+/*---------------------  Static Functions  --------------------------*/
+
+/*---------------------  Static Definitions -------------------------*/
+#define CRITICAL_PACKET_LEN      256    // if packet size < 256 -> in-direct send
+                                        //    packet size >= 256 -> direct send
+
+const WORD wTimeStampOff[2][MAX_RATE] = {
+        {384, 288, 226, 209, 54, 43, 37, 31, 28, 25, 24, 23}, // Long Preamble
+        {384, 192, 130, 113, 54, 43, 37, 31, 28, 25, 24, 23}, // Short Preamble
+    };
+
+const WORD wFB_Opt0[2][5] = {
+        {RATE_12M, RATE_18M, RATE_24M, RATE_36M, RATE_48M}, // fallback_rate0
+        {RATE_12M, RATE_12M, RATE_18M, RATE_24M, RATE_36M}, // fallback_rate1
+    };
+const WORD wFB_Opt1[2][5] = {
+        {RATE_12M, RATE_18M, RATE_24M, RATE_24M, RATE_36M}, // fallback_rate0
+        {RATE_6M , RATE_6M,  RATE_12M, RATE_12M, RATE_18M}, // fallback_rate1
+    };
+
+
+#define RTSDUR_BB       0
+#define RTSDUR_BA       1
+#define RTSDUR_AA       2
+#define CTSDUR_BA       3
+#define RTSDUR_BA_F0    4
+#define RTSDUR_AA_F0    5
+#define RTSDUR_BA_F1    6
+#define RTSDUR_AA_F1    7
+#define CTSDUR_BA_F0    8
+#define CTSDUR_BA_F1    9
+#define DATADUR_B       10
+#define DATADUR_A       11
+#define DATADUR_A_F0    12
+#define DATADUR_A_F1    13
+
+/*---------------------  Static Functions  --------------------------*/
+
+
+
+static
+VOID
+s_vFillTxKey(
+    IN  PSDevice   pDevice,
+    IN  PBYTE      pbyBuf,
+    IN  PBYTE      pbyIVHead,
+    IN  PSKeyItem  pTransmitKey,
+    IN  PBYTE      pbyHdrBuf,
+    IN  WORD       wPayloadLen,
+    OUT PBYTE      pMICHDR
+    );
+
+
+
+static
+VOID
+s_vFillRTSHead(
+    IN PSDevice         pDevice,
+    IN BYTE             byPktTyp,
+    IN PVOID            pvRTS,
+    IN UINT             cbFrameLength,
+    IN BOOL             bNeedAck,
+    IN BOOL             bDisCRC,
+    IN PSEthernetHeader psEthHeader,
+    IN WORD             wCurrentRate,
+    IN BYTE             byFBOption
+    );
+
+static
+VOID
+s_vGenerateTxParameter(
+    IN PSDevice         pDevice,
+    IN  BYTE            byPktTyp,
+    IN PVOID            pTxBufHead,
+    IN PVOID            pvRrvTime,
+    IN PVOID            pvRTS,
+    IN PVOID            pvCTS,
+    IN UINT             cbFrameSize,
+    IN BOOL             bNeedACK,
+    IN UINT             uDMAIdx,
+    IN PSEthernetHeader psEthHeader,
+    IN WORD             wCurrentRate
+    );
+
+
+
+static void s_vFillFragParameter(
+    IN PSDevice pDevice,
+    IN PBYTE    pbyBuffer,
+    IN UINT     uTxType,
+    IN PVOID    pvtdCurr,
+    IN WORD     wFragType,
+    IN UINT     cbReqCount
+    );
+
+
+static
+UINT
+s_cbFillTxBufHead (
+    IN  PSDevice         pDevice,
+    IN  BYTE             byPktTyp,
+    IN  PBYTE            pbyTxBufferAddr,
+    IN  UINT             cbFrameBodySize,
+    IN  UINT             uDMAIdx,
+    IN  PSTxDesc         pHeadTD,
+    IN  PSEthernetHeader psEthHeader,
+    IN  PBYTE            pPacket,
+    IN  BOOL             bNeedEncrypt,
+    IN  PSKeyItem        pTransmitKey,
+    IN  UINT             uNodeIndex,
+    OUT PUINT            puMACfragNum
+    );
+
+
+static
+UINT
+s_uFillDataHead (
+    IN PSDevice pDevice,
+    IN BYTE     byPktTyp,
+    IN PVOID    pTxDataHead,
+    IN UINT     cbFrameLength,
+    IN UINT     uDMAIdx,
+    IN BOOL     bNeedAck,
+    IN UINT     uFragIdx,
+    IN UINT     cbLastFragmentSize,
+    IN UINT     uMACfragNum,
+    IN BYTE     byFBOption,
+    IN WORD     wCurrentRate
+    );
+
+
+/*---------------------  Export Variables  --------------------------*/
+
+
+
+static
+VOID
+s_vFillTxKey (
+    IN  PSDevice   pDevice,
+    IN  PBYTE      pbyBuf,
+    IN  PBYTE      pbyIVHead,
+    IN  PSKeyItem  pTransmitKey,
+    IN  PBYTE      pbyHdrBuf,
+    IN  WORD       wPayloadLen,
+    OUT PBYTE      pMICHDR
+    )
+{
+    PDWORD          pdwIV = (PDWORD) pbyIVHead;
+    PDWORD          pdwExtIV = (PDWORD) ((PBYTE)pbyIVHead+4);
+    WORD            wValue;
+    PS802_11Header  pMACHeader = (PS802_11Header)pbyHdrBuf;
+    DWORD           dwRevIVCounter;
+    BYTE            byKeyIndex = 0;
+
+
+
+    //Fill TXKEY
+    if (pTransmitKey == NULL)
+        return;
+
+    dwRevIVCounter = cpu_to_le32(pDevice->dwIVCounter);
+    *pdwIV = pDevice->dwIVCounter;
+    byKeyIndex = pTransmitKey->dwKeyIndex & 0xf;
+
+    if (pTransmitKey->byCipherSuite == KEY_CTL_WEP) {
+        if (pTransmitKey->uKeyLength == WLAN_WEP232_KEYLEN ){
+            MEMvCopy(pDevice->abyPRNG, (PBYTE)&(dwRevIVCounter), 3);
+            MEMvCopy(pDevice->abyPRNG+3, pTransmitKey->abyKey, pTransmitKey->uKeyLength);
+        } else {
+            MEMvCopy(pbyBuf, (PBYTE)&(dwRevIVCounter), 3);
+            MEMvCopy(pbyBuf+3, pTransmitKey->abyKey, pTransmitKey->uKeyLength);
+            if(pTransmitKey->uKeyLength == WLAN_WEP40_KEYLEN) {
+                MEMvCopy(pbyBuf+8, (PBYTE)&(dwRevIVCounter), 3);
+                MEMvCopy(pbyBuf+11, pTransmitKey->abyKey, pTransmitKey->uKeyLength);
+            }
+            MEMvCopy(pDevice->abyPRNG, pbyBuf, 16);
+        }
+        // Append IV after Mac Header
+        *pdwIV &= WEP_IV_MASK;//00000000 11111111 11111111 11111111
+        *pdwIV |= (byKeyIndex << 30);
+        *pdwIV = cpu_to_le32(*pdwIV);
+        pDevice->dwIVCounter++;
+        if (pDevice->dwIVCounter > WEP_IV_MASK) {
+            pDevice->dwIVCounter = 0;
+        }
+    } else if (pTransmitKey->byCipherSuite == KEY_CTL_TKIP) {
+        pTransmitKey->wTSC15_0++;
+        if (pTransmitKey->wTSC15_0 == 0) {
+            pTransmitKey->dwTSC47_16++;
+        }
+        TKIPvMixKey(pTransmitKey->abyKey, pDevice->abyCurrentNetAddr,
+                    pTransmitKey->wTSC15_0, pTransmitKey->dwTSC47_16, pDevice->abyPRNG);
+        MEMvCopy(pbyBuf, pDevice->abyPRNG, 16);
+        // Make IV
+        MEMvCopy(pdwIV, pDevice->abyPRNG, 3);
+
+        *(pbyIVHead+3) = (BYTE)(((byKeyIndex << 6) & 0xc0) | 0x20); // 0x20 is ExtIV
+        // Append IV&ExtIV after Mac Header
+        *pdwExtIV = cpu_to_le32(pTransmitKey->dwTSC47_16);
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"vFillTxKey()---- pdwExtIV: %lx\n", *pdwExtIV);
+
+    } else if (pTransmitKey->byCipherSuite == KEY_CTL_CCMP) {
+        pTransmitKey->wTSC15_0++;
+        if (pTransmitKey->wTSC15_0 == 0) {
+            pTransmitKey->dwTSC47_16++;
+        }
+        MEMvCopy(pbyBuf, pTransmitKey->abyKey, 16);
+
+        // Make IV
+        *pdwIV = 0;
+        *(pbyIVHead+3) = (BYTE)(((byKeyIndex << 6) & 0xc0) | 0x20); // 0x20 is ExtIV
+        *pdwIV |= cpu_to_le16((WORD)(pTransmitKey->wTSC15_0));
+        //Append IV&ExtIV after Mac Header
+        *pdwExtIV = cpu_to_le32(pTransmitKey->dwTSC47_16);
+
+        //Fill MICHDR0
+        *pMICHDR = 0x59;
+        *((PBYTE)(pMICHDR+1)) = 0; // TxPriority
+        MEMvCopy(pMICHDR+2, &(pMACHeader->abyAddr2[0]), 6);
+        *((PBYTE)(pMICHDR+8)) = HIBYTE(HIWORD(pTransmitKey->dwTSC47_16));
+        *((PBYTE)(pMICHDR+9)) = LOBYTE(HIWORD(pTransmitKey->dwTSC47_16));
+        *((PBYTE)(pMICHDR+10)) = HIBYTE(LOWORD(pTransmitKey->dwTSC47_16));
+        *((PBYTE)(pMICHDR+11)) = LOBYTE(LOWORD(pTransmitKey->dwTSC47_16));
+        *((PBYTE)(pMICHDR+12)) = HIBYTE(pTransmitKey->wTSC15_0);
+        *((PBYTE)(pMICHDR+13)) = LOBYTE(pTransmitKey->wTSC15_0);
+        *((PBYTE)(pMICHDR+14)) = HIBYTE(wPayloadLen);
+        *((PBYTE)(pMICHDR+15)) = LOBYTE(wPayloadLen);
+
+        //Fill MICHDR1
+        *((PBYTE)(pMICHDR+16)) = 0; // HLEN[15:8]
+        if (pDevice->bLongHeader) {
+            *((PBYTE)(pMICHDR+17)) = 28; // HLEN[7:0]
+        } else {
+            *((PBYTE)(pMICHDR+17)) = 22; // HLEN[7:0]
+        }
+        wValue = cpu_to_le16(pMACHeader->wFrameCtl & 0xC78F);
+        MEMvCopy(pMICHDR+18, (PBYTE)&wValue, 2); // MSKFRACTL
+        MEMvCopy(pMICHDR+20, &(pMACHeader->abyAddr1[0]), 6);
+        MEMvCopy(pMICHDR+26, &(pMACHeader->abyAddr2[0]), 6);
+
+        //Fill MICHDR2
+        MEMvCopy(pMICHDR+32, &(pMACHeader->abyAddr3[0]), 6);
+        wValue = pMACHeader->wSeqCtl;
+        wValue &= 0x000F;
+        wValue = cpu_to_le16(wValue);
+        MEMvCopy(pMICHDR+38, (PBYTE)&wValue, 2); // MSKSEQCTL
+        if (pDevice->bLongHeader) {
+            MEMvCopy(pMICHDR+40, &(pMACHeader->abyAddr4[0]), 6);
+        }
+    }
+}
+
+
+static
+VOID
+s_vSWencryption (
+    IN  PSDevice            pDevice,
+    IN  PSKeyItem           pTransmitKey,
+    IN  PBYTE               pbyPayloadHead,
+    IN  WORD                wPayloadSize
+    )
+{
+    UINT   cbICVlen = 4;
+    DWORD  dwICV = 0xFFFFFFFFL;
+    PDWORD pdwICV;
+
+    if (pTransmitKey == NULL)
+        return;
+
+    if (pTransmitKey->byCipherSuite == KEY_CTL_WEP) {
+        //=======================================================================
+        // Append ICV after payload
+        dwICV = CRCdwGetCrc32Ex(pbyPayloadHead, wPayloadSize, dwICV);//ICV(Payload)
+        pdwICV = (PDWORD)(pbyPayloadHead + wPayloadSize);
+        // finally, we must invert dwCRC to get the correct answer
+        *pdwICV = cpu_to_le32(~dwICV);
+        // RC4 encryption
+        rc4_init(&pDevice->SBox, pDevice->abyPRNG, pTransmitKey->uKeyLength + 3);
+        rc4_encrypt(&pDevice->SBox, pbyPayloadHead, pbyPayloadHead, wPayloadSize+cbICVlen);
+        //=======================================================================
+    } else if (pTransmitKey->byCipherSuite == KEY_CTL_TKIP) {
+        //=======================================================================
+        //Append ICV after payload
+        dwICV = CRCdwGetCrc32Ex(pbyPayloadHead, wPayloadSize, dwICV);//ICV(Payload)
+        pdwICV = (PDWORD)(pbyPayloadHead + wPayloadSize);
+        // finally, we must invert dwCRC to get the correct answer
+        *pdwICV = cpu_to_le32(~dwICV);
+        // RC4 encryption
+        rc4_init(&pDevice->SBox, pDevice->abyPRNG, TKIP_KEY_LEN);
+        rc4_encrypt(&pDevice->SBox, pbyPayloadHead, pbyPayloadHead, wPayloadSize+cbICVlen);
+        //=======================================================================
+    }
+}
+
+
+
+
+/*byPktTyp : PK_TYPE_11A     0
+             PK_TYPE_11B     1
+             PK_TYPE_11GB    2
+             PK_TYPE_11GA    3
+*/
+static
+UINT
+s_uGetTxRsvTime (
+    IN PSDevice pDevice,
+    IN BYTE     byPktTyp,
+    IN UINT     cbFrameLength,
+    IN WORD     wRate,
+    IN BOOL     bNeedAck
+    )
+{
+    UINT uDataTime, uAckTime;
+
+    uDataTime = BBuGetFrameTime(pDevice->byPreambleType, byPktTyp, cbFrameLength, wRate);
+#ifdef	PLICE_DEBUG
+	//printk("s_uGetTxRsvTime is %d\n",uDataTime);
+#endif
+    if (byPktTyp == PK_TYPE_11B) {//llb,CCK mode
+        uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktTyp, 14, (WORD)pDevice->byTopCCKBasicRate);
+    } else {//11g 2.4G OFDM mode & 11a 5G OFDM mode
+        uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktTyp, 14, (WORD)pDevice->byTopOFDMBasicRate);
+    }
+
+    if (bNeedAck) {
+        return (uDataTime + pDevice->uSIFS + uAckTime);
+    }
+    else {
+        return uDataTime;
+    }
+}
+
+//byFreqType: 0=>5GHZ 1=>2.4GHZ
+static
+UINT
+s_uGetRTSCTSRsvTime (
+    IN PSDevice pDevice,
+    IN BYTE byRTSRsvType,
+    IN BYTE byPktTyp,
+    IN UINT cbFrameLength,
+    IN WORD wCurrentRate
+    )
+{
+    UINT uRrvTime  , uRTSTime, uCTSTime, uAckTime, uDataTime;
+
+    uRrvTime = uRTSTime = uCTSTime = uAckTime = uDataTime = 0;
+
+
+    uDataTime = BBuGetFrameTime(pDevice->byPreambleType, byPktTyp, cbFrameLength, wCurrentRate);
+    if (byRTSRsvType == 0) { //RTSTxRrvTime_bb
+        uRTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktTyp, 20, pDevice->byTopCCKBasicRate);
+        uCTSTime = uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktTyp, 14, pDevice->byTopCCKBasicRate);
+    }
+    else if (byRTSRsvType == 1){ //RTSTxRrvTime_ba, only in 2.4GHZ
+        uRTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktTyp, 20, pDevice->byTopCCKBasicRate);
+        uCTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktTyp, 14, pDevice->byTopCCKBasicRate);
+        uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktTyp, 14, pDevice->byTopOFDMBasicRate);
+    }
+    else if (byRTSRsvType == 2) { //RTSTxRrvTime_aa
+        uRTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktTyp, 20, pDevice->byTopOFDMBasicRate);
+        uCTSTime = uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktTyp, 14, pDevice->byTopOFDMBasicRate);
+    }
+    else if (byRTSRsvType == 3) { //CTSTxRrvTime_ba, only in 2.4GHZ
+        uCTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktTyp, 14, pDevice->byTopCCKBasicRate);
+        uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktTyp, 14, pDevice->byTopOFDMBasicRate);
+        uRrvTime = uCTSTime + uAckTime + uDataTime + 2*pDevice->uSIFS;
+        return uRrvTime;
+    }
+
+    //RTSRrvTime
+    uRrvTime = uRTSTime + uCTSTime + uAckTime + uDataTime + 3*pDevice->uSIFS;
+    return uRrvTime;
+}
+
+//byFreqType 0: 5GHz, 1:2.4Ghz
+static
+UINT
+s_uGetDataDuration (
+    IN PSDevice pDevice,
+    IN BYTE     byDurType,
+    IN UINT     cbFrameLength,
+    IN BYTE     byPktType,
+    IN WORD     wRate,
+    IN BOOL     bNeedAck,
+    IN UINT     uFragIdx,
+    IN UINT     cbLastFragmentSize,
+    IN UINT     uMACfragNum,
+    IN BYTE     byFBOption
+    )
+{
+    BOOL bLastFrag = 0;
+    UINT uAckTime =0, uNextPktTime = 0;
+
+
+
+    if (uFragIdx == (uMACfragNum-1)) {
+        bLastFrag = 1;
+    }
+
+
+    switch (byDurType) {
+
+    case DATADUR_B:    //DATADUR_B
+        if (((uMACfragNum == 1)) || (bLastFrag == 1)) {//Non Frag or Last Frag
+            if (bNeedAck) {
+            	uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopCCKBasicRate);
+                return (pDevice->uSIFS + uAckTime);
+            } else {
+                return 0;
+            }
+        }
+        else {//First Frag or Mid Frag
+            if (uFragIdx == (uMACfragNum-2)) {
+            	uNextPktTime = s_uGetTxRsvTime(pDevice, byPktType, cbLastFragmentSize, wRate, bNeedAck);
+            } else {
+                uNextPktTime = s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wRate, bNeedAck);
+            }
+            if (bNeedAck) {
+            	uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopCCKBasicRate);
+                return (pDevice->uSIFS + uAckTime + uNextPktTime);
+            } else {
+                return (pDevice->uSIFS + uNextPktTime);
+            }
+        }
+        break;
+
+    case DATADUR_A:    //DATADUR_A
+        if (((uMACfragNum==1)) || (bLastFrag==1)) {//Non Frag or Last Frag
+            if(bNeedAck){
+            	uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
+                return (pDevice->uSIFS + uAckTime);
+            } else {
+                return 0;
+            }
+        }
+        else {//First Frag or Mid Frag
+            if(uFragIdx == (uMACfragNum-2)){
+            	uNextPktTime = s_uGetTxRsvTime(pDevice, byPktType, cbLastFragmentSize, wRate, bNeedAck);
+            } else {
+                uNextPktTime = s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wRate, bNeedAck);
+            }
+            if(bNeedAck){
+            	uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
+                return (pDevice->uSIFS + uAckTime + uNextPktTime);
+            } else {
+                return (pDevice->uSIFS + uNextPktTime);
+            }
+        }
+        break;
+
+    case DATADUR_A_F0:    //DATADUR_A_F0
+	    if (((uMACfragNum==1)) || (bLastFrag==1)) {//Non Frag or Last Frag
+            if(bNeedAck){
+            	uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
+                return (pDevice->uSIFS + uAckTime);
+            } else {
+                return 0;
+            }
+        }
+	    else { //First Frag or Mid Frag
+	        if (byFBOption == AUTO_FB_0) {
+                if (wRate < RATE_18M)
+                    wRate = RATE_18M;
+                else if (wRate > RATE_54M)
+                    wRate = RATE_54M;
+
+	            if(uFragIdx == (uMACfragNum-2)){
+            	    uNextPktTime = s_uGetTxRsvTime(pDevice, byPktType, cbLastFragmentSize, wFB_Opt0[FB_RATE0][wRate-RATE_18M], bNeedAck);
+                } else {
+                    uNextPktTime = s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt0[FB_RATE0][wRate-RATE_18M], bNeedAck);
+                }
+	        } else { // (byFBOption == AUTO_FB_1)
+                if (wRate < RATE_18M)
+                    wRate = RATE_18M;
+                else if (wRate > RATE_54M)
+                    wRate = RATE_54M;
+
+	            if(uFragIdx == (uMACfragNum-2)){
+            	    uNextPktTime = s_uGetTxRsvTime(pDevice, byPktType, cbLastFragmentSize, wFB_Opt1[FB_RATE0][wRate-RATE_18M], bNeedAck);
+                } else {
+                    uNextPktTime = s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt1[FB_RATE0][wRate-RATE_18M], bNeedAck);
+                }
+	        }
+
+	        if(bNeedAck){
+            	uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
+                return (pDevice->uSIFS + uAckTime + uNextPktTime);
+            } else {
+                return (pDevice->uSIFS + uNextPktTime);
+            }
+	    }
+        break;
+
+    case DATADUR_A_F1:    //DATADUR_A_F1
+        if (((uMACfragNum==1)) || (bLastFrag==1)) {//Non Frag or Last Frag
+            if(bNeedAck){
+            	uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
+                return (pDevice->uSIFS + uAckTime);
+            } else {
+                return 0;
+            }
+        }
+	    else { //First Frag or Mid Frag
+	        if (byFBOption == AUTO_FB_0) {
+                if (wRate < RATE_18M)
+                    wRate = RATE_18M;
+                else if (wRate > RATE_54M)
+                    wRate = RATE_54M;
+
+	            if(uFragIdx == (uMACfragNum-2)){
+            	    uNextPktTime = s_uGetTxRsvTime(pDevice, byPktType, cbLastFragmentSize, wFB_Opt0[FB_RATE1][wRate-RATE_18M], bNeedAck);
+                } else {
+                    uNextPktTime = s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt0[FB_RATE1][wRate-RATE_18M], bNeedAck);
+                }
+
+	        } else { // (byFBOption == AUTO_FB_1)
+                if (wRate < RATE_18M)
+                    wRate = RATE_18M;
+                else if (wRate > RATE_54M)
+                    wRate = RATE_54M;
+
+	            if(uFragIdx == (uMACfragNum-2)){
+            	    uNextPktTime = s_uGetTxRsvTime(pDevice, byPktType, cbLastFragmentSize, wFB_Opt1[FB_RATE1][wRate-RATE_18M], bNeedAck);
+                } else {
+                    uNextPktTime = s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt1[FB_RATE1][wRate-RATE_18M], bNeedAck);
+                }
+	        }
+	        if(bNeedAck){
+            	uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
+                return (pDevice->uSIFS + uAckTime + uNextPktTime);
+            } else {
+                return (pDevice->uSIFS + uNextPktTime);
+            }
+	    }
+        break;
+
+    default:
+        break;
+    }
+
+	ASSERT(FALSE);
+	return 0;
+}
+
+
+//byFreqType: 0=>5GHZ 1=>2.4GHZ
+static
+UINT
+s_uGetRTSCTSDuration (
+    IN PSDevice pDevice,
+    IN BYTE byDurType,
+    IN UINT cbFrameLength,
+    IN BYTE byPktType,
+    IN WORD wRate,
+    IN BOOL bNeedAck,
+    IN BYTE byFBOption
+    )
+{
+    UINT uCTSTime = 0, uDurTime = 0;
+
+
+    switch (byDurType) {
+
+    case RTSDUR_BB:    //RTSDuration_bb
+        uCTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopCCKBasicRate);
+        uDurTime = uCTSTime + 2*pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wRate, bNeedAck);
+        break;
+
+    case RTSDUR_BA:    //RTSDuration_ba
+        uCTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopCCKBasicRate);
+        uDurTime = uCTSTime + 2*pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wRate, bNeedAck);
+        break;
+
+    case RTSDUR_AA:    //RTSDuration_aa
+        uCTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
+        uDurTime = uCTSTime + 2*pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wRate, bNeedAck);
+        break;
+
+    case CTSDUR_BA:    //CTSDuration_ba
+        uDurTime = pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wRate, bNeedAck);
+        break;
+
+    case RTSDUR_BA_F0: //RTSDuration_ba_f0
+        uCTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopCCKBasicRate);
+        if ((byFBOption == AUTO_FB_0) && (wRate >= RATE_18M) && (wRate <=RATE_54M)) {
+            uDurTime = uCTSTime + 2*pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt0[FB_RATE0][wRate-RATE_18M], bNeedAck);
+        } else if ((byFBOption == AUTO_FB_1) && (wRate >= RATE_18M) && (wRate <=RATE_54M)) {
+            uDurTime = uCTSTime + 2*pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt1[FB_RATE0][wRate-RATE_18M], bNeedAck);
+        }
+        break;
+
+    case RTSDUR_AA_F0: //RTSDuration_aa_f0
+        uCTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
+        if ((byFBOption == AUTO_FB_0) && (wRate >= RATE_18M) && (wRate <=RATE_54M)) {
+            uDurTime = uCTSTime + 2*pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt0[FB_RATE0][wRate-RATE_18M], bNeedAck);
+        } else if ((byFBOption == AUTO_FB_1) && (wRate >= RATE_18M) && (wRate <=RATE_54M)) {
+            uDurTime = uCTSTime + 2*pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt1[FB_RATE0][wRate-RATE_18M], bNeedAck);
+        }
+        break;
+
+    case RTSDUR_BA_F1: //RTSDuration_ba_f1
+        uCTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopCCKBasicRate);
+        if ((byFBOption == AUTO_FB_0) && (wRate >= RATE_18M) && (wRate <=RATE_54M)) {
+            uDurTime = uCTSTime + 2*pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt0[FB_RATE1][wRate-RATE_18M], bNeedAck);
+        } else if ((byFBOption == AUTO_FB_1) && (wRate >= RATE_18M) && (wRate <=RATE_54M)) {
+            uDurTime = uCTSTime + 2*pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt1[FB_RATE1][wRate-RATE_18M], bNeedAck);
+        }
+        break;
+
+    case RTSDUR_AA_F1: //RTSDuration_aa_f1
+        uCTSTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, pDevice->byTopOFDMBasicRate);
+        if ((byFBOption == AUTO_FB_0) && (wRate >= RATE_18M) && (wRate <=RATE_54M)) {
+            uDurTime = uCTSTime + 2*pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt0[FB_RATE1][wRate-RATE_18M], bNeedAck);
+        } else if ((byFBOption == AUTO_FB_1) && (wRate >= RATE_18M) && (wRate <=RATE_54M)) {
+            uDurTime = uCTSTime + 2*pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt1[FB_RATE1][wRate-RATE_18M], bNeedAck);
+        }
+        break;
+
+    case CTSDUR_BA_F0: //CTSDuration_ba_f0
+        if ((byFBOption == AUTO_FB_0) && (wRate >= RATE_18M) && (wRate <=RATE_54M)) {
+            uDurTime = pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt0[FB_RATE0][wRate-RATE_18M], bNeedAck);
+        } else if ((byFBOption == AUTO_FB_1) && (wRate >= RATE_18M) && (wRate <=RATE_54M)) {
+            uDurTime = pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt1[FB_RATE0][wRate-RATE_18M], bNeedAck);
+        }
+        break;
+
+    case CTSDUR_BA_F1: //CTSDuration_ba_f1
+        if ((byFBOption == AUTO_FB_0) && (wRate >= RATE_18M) && (wRate <=RATE_54M)) {
+            uDurTime = pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt0[FB_RATE1][wRate-RATE_18M], bNeedAck);
+        } else if ((byFBOption == AUTO_FB_1) && (wRate >= RATE_18M) && (wRate <=RATE_54M)) {
+            uDurTime = pDevice->uSIFS + s_uGetTxRsvTime(pDevice, byPktType, cbFrameLength, wFB_Opt1[FB_RATE1][wRate-RATE_18M], bNeedAck);
+        }
+        break;
+
+    default:
+        break;
+    }
+
+    return uDurTime;
+
+}
+
+
+
+static
+UINT
+s_uFillDataHead (
+    IN PSDevice pDevice,
+    IN BYTE     byPktTyp,
+    IN PVOID    pTxDataHead,
+    IN UINT     cbFrameLength,
+    IN UINT     uDMAIdx,
+    IN BOOL     bNeedAck,
+    IN UINT     uFragIdx,
+    IN UINT     cbLastFragmentSize,
+    IN UINT     uMACfragNum,
+    IN BYTE     byFBOption,
+    IN WORD     wCurrentRate
+    )
+{
+    WORD  wLen = 0x0000;
+
+    if (pTxDataHead == NULL) {
+        return 0;
+    }
+
+    if (byPktTyp == PK_TYPE_11GB || byPktTyp == PK_TYPE_11GA) {
+        if (byFBOption == AUTO_FB_NONE) {
+            PSTxDataHead_g pBuf = (PSTxDataHead_g)pTxDataHead;
+            //Get SignalField,ServiceField,Length
+            BBvCaculateParameter(pDevice, cbFrameLength, wCurrentRate, byPktTyp,
+                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField_a), (PBYTE)&(pBuf->bySignalField_a)
+            );
+            pBuf->wTransmitLength_a = cpu_to_le16(wLen);
+            BBvCaculateParameter(pDevice, cbFrameLength, pDevice->byTopCCKBasicRate, PK_TYPE_11B,
+                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField_b), (PBYTE)&(pBuf->bySignalField_b)
+            );
+            pBuf->wTransmitLength_b = cpu_to_le16(wLen);
+            //Get Duration and TimeStamp
+            pBuf->wDuration_a = cpu_to_le16((WORD)s_uGetDataDuration(pDevice, DATADUR_A, cbFrameLength,
+                                                         byPktTyp, wCurrentRate, bNeedAck, uFragIdx,
+                                                         cbLastFragmentSize, uMACfragNum,
+                                                         byFBOption)); //1: 2.4GHz
+            pBuf->wDuration_b = cpu_to_le16((WORD)s_uGetDataDuration(pDevice, DATADUR_B, cbFrameLength,
+                                                         PK_TYPE_11B, pDevice->byTopCCKBasicRate,
+                                                         bNeedAck, uFragIdx, cbLastFragmentSize,
+                                                         uMACfragNum, byFBOption)); //1: 2.4
+
+            pBuf->wTimeStampOff_a = cpu_to_le16(wTimeStampOff[pDevice->byPreambleType%2][wCurrentRate%MAX_RATE]);
+            pBuf->wTimeStampOff_b = cpu_to_le16(wTimeStampOff[pDevice->byPreambleType%2][pDevice->byTopCCKBasicRate%MAX_RATE]);
+
+            return (pBuf->wDuration_a);
+         } else {
+            // Auto Fallback
+            PSTxDataHead_g_FB pBuf = (PSTxDataHead_g_FB)pTxDataHead;
+            //Get SignalField,ServiceField,Length
+            BBvCaculateParameter(pDevice, cbFrameLength, wCurrentRate, byPktTyp,
+                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField_a), (PBYTE)&(pBuf->bySignalField_a)
+            );
+            pBuf->wTransmitLength_a = cpu_to_le16(wLen);
+            BBvCaculateParameter(pDevice, cbFrameLength, pDevice->byTopCCKBasicRate, PK_TYPE_11B,
+                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField_b), (PBYTE)&(pBuf->bySignalField_b)
+            );
+            pBuf->wTransmitLength_b = cpu_to_le16(wLen);
+            //Get Duration and TimeStamp
+            pBuf->wDuration_a = cpu_to_le16((WORD)s_uGetDataDuration(pDevice, DATADUR_A, cbFrameLength, byPktTyp,
+                                         wCurrentRate, bNeedAck, uFragIdx, cbLastFragmentSize, uMACfragNum, byFBOption)); //1: 2.4GHz
+            pBuf->wDuration_b = cpu_to_le16((WORD)s_uGetDataDuration(pDevice, DATADUR_B, cbFrameLength, PK_TYPE_11B,
+                                         pDevice->byTopCCKBasicRate, bNeedAck, uFragIdx, cbLastFragmentSize, uMACfragNum, byFBOption)); //1: 2.4GHz
+            pBuf->wDuration_a_f0 = cpu_to_le16((WORD)s_uGetDataDuration(pDevice, DATADUR_A_F0, cbFrameLength, byPktTyp,
+                                         wCurrentRate, bNeedAck, uFragIdx, cbLastFragmentSize, uMACfragNum, byFBOption)); //1: 2.4GHz
+            pBuf->wDuration_a_f1 = cpu_to_le16((WORD)s_uGetDataDuration(pDevice, DATADUR_A_F1, cbFrameLength, byPktTyp,
+                                         wCurrentRate, bNeedAck, uFragIdx, cbLastFragmentSize, uMACfragNum, byFBOption)); //1: 2.4GHz
+
+            pBuf->wTimeStampOff_a = cpu_to_le16(wTimeStampOff[pDevice->byPreambleType%2][wCurrentRate%MAX_RATE]);
+            pBuf->wTimeStampOff_b = cpu_to_le16(wTimeStampOff[pDevice->byPreambleType%2][pDevice->byTopCCKBasicRate%MAX_RATE]);
+
+            return (pBuf->wDuration_a);
+        } //if (byFBOption == AUTO_FB_NONE)
+    }
+    else if (byPktTyp == PK_TYPE_11A) {
+        if ((byFBOption != AUTO_FB_NONE)) {
+            // Auto Fallback
+            PSTxDataHead_a_FB pBuf = (PSTxDataHead_a_FB)pTxDataHead;
+            //Get SignalField,ServiceField,Length
+            BBvCaculateParameter(pDevice, cbFrameLength, wCurrentRate, byPktTyp,
+                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField), (PBYTE)&(pBuf->bySignalField)
+            );
+            pBuf->wTransmitLength = cpu_to_le16(wLen);
+            //Get Duration and TimeStampOff
+
+            pBuf->wDuration = cpu_to_le16((WORD)s_uGetDataDuration(pDevice, DATADUR_A, cbFrameLength, byPktTyp,
+                                        wCurrentRate, bNeedAck, uFragIdx, cbLastFragmentSize, uMACfragNum, byFBOption)); //0: 5GHz
+            pBuf->wDuration_f0 = cpu_to_le16((WORD)s_uGetDataDuration(pDevice, DATADUR_A_F0, cbFrameLength, byPktTyp,
+                                        wCurrentRate, bNeedAck, uFragIdx, cbLastFragmentSize, uMACfragNum, byFBOption)); //0: 5GHz
+            pBuf->wDuration_f1 = cpu_to_le16((WORD)s_uGetDataDuration(pDevice, DATADUR_A_F1, cbFrameLength, byPktTyp,
+                                        wCurrentRate, bNeedAck, uFragIdx, cbLastFragmentSize, uMACfragNum, byFBOption)); //0: 5GHz
+            pBuf->wTimeStampOff = cpu_to_le16(wTimeStampOff[pDevice->byPreambleType%2][wCurrentRate%MAX_RATE]);
+            return (pBuf->wDuration);
+        } else {
+            PSTxDataHead_ab pBuf = (PSTxDataHead_ab)pTxDataHead;
+            //Get SignalField,ServiceField,Length
+            BBvCaculateParameter(pDevice, cbFrameLength, wCurrentRate, byPktTyp,
+                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField), (PBYTE)&(pBuf->bySignalField)
+            );
+            pBuf->wTransmitLength = cpu_to_le16(wLen);
+            //Get Duration and TimeStampOff
+
+            pBuf->wDuration = cpu_to_le16((WORD)s_uGetDataDuration(pDevice, DATADUR_A, cbFrameLength, byPktTyp,
+                                                       wCurrentRate, bNeedAck, uFragIdx,
+                                                       cbLastFragmentSize, uMACfragNum,
+                                                       byFBOption));
+
+            pBuf->wTimeStampOff = cpu_to_le16(wTimeStampOff[pDevice->byPreambleType%2][wCurrentRate%MAX_RATE]);
+            return (pBuf->wDuration);
+        }
+    }
+    else {
+            PSTxDataHead_ab pBuf = (PSTxDataHead_ab)pTxDataHead;
+            //Get SignalField,ServiceField,Length
+            BBvCaculateParameter(pDevice, cbFrameLength, wCurrentRate, byPktTyp,
+                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField), (PBYTE)&(pBuf->bySignalField)
+            );
+            pBuf->wTransmitLength = cpu_to_le16(wLen);
+            //Get Duration and TimeStampOff
+            pBuf->wDuration = cpu_to_le16((WORD)s_uGetDataDuration(pDevice, DATADUR_B, cbFrameLength, byPktTyp,
+                                                       wCurrentRate, bNeedAck, uFragIdx,
+                                                       cbLastFragmentSize, uMACfragNum,
+                                                       byFBOption));
+            pBuf->wTimeStampOff = cpu_to_le16(wTimeStampOff[pDevice->byPreambleType%2][wCurrentRate%MAX_RATE]);
+            return (pBuf->wDuration);
+    }
+    return 0;
+}
+
+
+static
+VOID
+s_vFillRTSHead (
+    IN PSDevice         pDevice,
+    IN BYTE             byPktTyp,
+    IN PVOID            pvRTS,
+    IN UINT             cbFrameLength,
+    IN BOOL             bNeedAck,
+    IN BOOL             bDisCRC,
+    IN PSEthernetHeader psEthHeader,
+    IN WORD             wCurrentRate,
+    IN BYTE             byFBOption
+    )
+{
+    UINT uRTSFrameLen = 20;
+    WORD  wLen = 0x0000;
+
+    // dummy code, only to avoid compiler warning message
+    UNREFERENCED_PARAMETER(bNeedAck);
+
+    if (pvRTS == NULL)
+    	return;
+
+    if (bDisCRC) {
+        // When CRCDIS bit is on, H/W forgot to generate FCS for RTS frame,
+        // in this case we need to decrease its length by 4.
+        uRTSFrameLen -= 4;
+    }
+
+    // Note: So far RTSHead dosen't appear in ATIM & Beacom DMA, so we don't need to take them into account.
+    //       Otherwise, we need to modified codes for them.
+    if (byPktTyp == PK_TYPE_11GB || byPktTyp == PK_TYPE_11GA) {
+        if (byFBOption == AUTO_FB_NONE) {
+            PSRTS_g pBuf = (PSRTS_g)pvRTS;
+            //Get SignalField,ServiceField,Length
+            BBvCaculateParameter(pDevice, uRTSFrameLen, pDevice->byTopCCKBasicRate, PK_TYPE_11B,
+                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField_b), (PBYTE)&(pBuf->bySignalField_b)
+            );
+            pBuf->wTransmitLength_b = cpu_to_le16(wLen);
+            BBvCaculateParameter(pDevice, uRTSFrameLen, pDevice->byTopOFDMBasicRate, byPktTyp,
+                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField_a), (PBYTE)&(pBuf->bySignalField_a)
+            );
+            pBuf->wTransmitLength_a = cpu_to_le16(wLen);
+            //Get Duration
+            pBuf->wDuration_bb = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_BB, cbFrameLength, PK_TYPE_11B, pDevice->byTopCCKBasicRate, bNeedAck, byFBOption));    //0:RTSDuration_bb, 1:2.4G, 1:CCKData
+            pBuf->wDuration_aa = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_AA, cbFrameLength, byPktTyp, wCurrentRate, bNeedAck, byFBOption)); //2:RTSDuration_aa, 1:2.4G, 2,3: 2.4G OFDMData
+            pBuf->wDuration_ba = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_BA, cbFrameLength, byPktTyp, wCurrentRate, bNeedAck, byFBOption)); //1:RTSDuration_ba, 1:2.4G, 2,3:2.4G OFDM Data
+
+            pBuf->Data.wDurationID = pBuf->wDuration_aa;
+            //Get RTS Frame body
+            pBuf->Data.wFrameControl = TYPE_CTL_RTS;//0x00B4
+            if ((pDevice->eOPMode == OP_MODE_ADHOC) ||
+                (pDevice->eOPMode == OP_MODE_AP)) {
+                MEMvCopy(&(pBuf->Data.abyRA[0]), &(psEthHeader->abyDstAddr[0]), U_ETHER_ADDR_LEN);
+            }
+            else {
+                MEMvCopy(&(pBuf->Data.abyRA[0]), &(pDevice->abyBSSID[0]), U_ETHER_ADDR_LEN);
+            }
+            if (pDevice->eOPMode == OP_MODE_AP) {
+                MEMvCopy(&(pBuf->Data.abyTA[0]), &(pDevice->abyBSSID[0]), U_ETHER_ADDR_LEN);
+            }
+            else {
+                MEMvCopy(&(pBuf->Data.abyTA[0]), &(psEthHeader->abySrcAddr[0]), U_ETHER_ADDR_LEN);
+            }
+        }
+        else {
+           PSRTS_g_FB pBuf = (PSRTS_g_FB)pvRTS;
+            //Get SignalField,ServiceField,Length
+            BBvCaculateParameter(pDevice, uRTSFrameLen, pDevice->byTopCCKBasicRate, PK_TYPE_11B,
+                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField_b), (PBYTE)&(pBuf->bySignalField_b)
+            );
+            pBuf->wTransmitLength_b = cpu_to_le16(wLen);
+            BBvCaculateParameter(pDevice, uRTSFrameLen, pDevice->byTopOFDMBasicRate, byPktTyp,
+                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField_a), (PBYTE)&(pBuf->bySignalField_a)
+            );
+            pBuf->wTransmitLength_a = cpu_to_le16(wLen);
+
+            //Get Duration
+            pBuf->wDuration_bb = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_BB, cbFrameLength, PK_TYPE_11B, pDevice->byTopCCKBasicRate, bNeedAck, byFBOption));    //0:RTSDuration_bb, 1:2.4G, 1:CCKData
+            pBuf->wDuration_aa = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_AA, cbFrameLength, byPktTyp, wCurrentRate, bNeedAck, byFBOption)); //2:RTSDuration_aa, 1:2.4G, 2,3:2.4G OFDMData
+            pBuf->wDuration_ba = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_BA, cbFrameLength, byPktTyp, wCurrentRate, bNeedAck, byFBOption)); //1:RTSDuration_ba, 1:2.4G, 2,3:2.4G OFDMData
+            pBuf->wRTSDuration_ba_f0 = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_BA_F0, cbFrameLength, byPktTyp, wCurrentRate, bNeedAck, byFBOption));    //4:wRTSDuration_ba_f0, 1:2.4G, 1:CCKData
+            pBuf->wRTSDuration_aa_f0 = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_AA_F0, cbFrameLength, byPktTyp, wCurrentRate, bNeedAck, byFBOption));    //5:wRTSDuration_aa_f0, 1:2.4G, 1:CCKData
+            pBuf->wRTSDuration_ba_f1 = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_BA_F1, cbFrameLength, byPktTyp, wCurrentRate, bNeedAck, byFBOption));    //6:wRTSDuration_ba_f1, 1:2.4G, 1:CCKData
+            pBuf->wRTSDuration_aa_f1 = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_AA_F1, cbFrameLength, byPktTyp, wCurrentRate, bNeedAck, byFBOption));    //7:wRTSDuration_aa_f1, 1:2.4G, 1:CCKData
+            pBuf->Data.wDurationID = pBuf->wDuration_aa;
+            //Get RTS Frame body
+            pBuf->Data.wFrameControl = TYPE_CTL_RTS;//0x00B4
+
+            if ((pDevice->eOPMode == OP_MODE_ADHOC) ||
+                (pDevice->eOPMode == OP_MODE_AP)) {
+                MEMvCopy(&(pBuf->Data.abyRA[0]), &(psEthHeader->abyDstAddr[0]), U_ETHER_ADDR_LEN);
+            }
+            else {
+                MEMvCopy(&(pBuf->Data.abyRA[0]), &(pDevice->abyBSSID[0]), U_ETHER_ADDR_LEN);
+            }
+
+            if (pDevice->eOPMode == OP_MODE_AP) {
+                MEMvCopy(&(pBuf->Data.abyTA[0]), &(pDevice->abyBSSID[0]), U_ETHER_ADDR_LEN);
+            }
+            else {
+                MEMvCopy(&(pBuf->Data.abyTA[0]), &(psEthHeader->abySrcAddr[0]), U_ETHER_ADDR_LEN);
+            }
+
+        } // if (byFBOption == AUTO_FB_NONE)
+    }
+    else if (byPktTyp == PK_TYPE_11A) {
+        if (byFBOption == AUTO_FB_NONE) {
+            PSRTS_ab pBuf = (PSRTS_ab)pvRTS;
+            //Get SignalField,ServiceField,Length
+            BBvCaculateParameter(pDevice, uRTSFrameLen, pDevice->byTopOFDMBasicRate, byPktTyp,
+                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField), (PBYTE)&(pBuf->bySignalField)
+            );
+            pBuf->wTransmitLength = cpu_to_le16(wLen);
+            //Get Duration
+            pBuf->wDuration = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_AA, cbFrameLength, byPktTyp, wCurrentRate, bNeedAck, byFBOption)); //0:RTSDuration_aa, 0:5G, 0: 5G OFDMData
+    	    pBuf->Data.wDurationID = pBuf->wDuration;
+            //Get RTS Frame body
+            pBuf->Data.wFrameControl = TYPE_CTL_RTS;//0x00B4
+
+            if ((pDevice->eOPMode == OP_MODE_ADHOC) ||
+                (pDevice->eOPMode == OP_MODE_AP)) {
+                MEMvCopy(&(pBuf->Data.abyRA[0]), &(psEthHeader->abyDstAddr[0]), U_ETHER_ADDR_LEN);
+            }
+            else {
+                MEMvCopy(&(pBuf->Data.abyRA[0]), &(pDevice->abyBSSID[0]), U_ETHER_ADDR_LEN);
+            }
+
+            if (pDevice->eOPMode == OP_MODE_AP) {
+                MEMvCopy(&(pBuf->Data.abyTA[0]), &(pDevice->abyBSSID[0]), U_ETHER_ADDR_LEN);
+            }
+            else {
+                MEMvCopy(&(pBuf->Data.abyTA[0]), &(psEthHeader->abySrcAddr[0]), U_ETHER_ADDR_LEN);
+            }
+
+        }
+        else {
+            PSRTS_a_FB pBuf = (PSRTS_a_FB)pvRTS;
+            //Get SignalField,ServiceField,Length
+            BBvCaculateParameter(pDevice, uRTSFrameLen, pDevice->byTopOFDMBasicRate, byPktTyp,
+                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField), (PBYTE)&(pBuf->bySignalField)
+            );
+            pBuf->wTransmitLength = cpu_to_le16(wLen);
+            //Get Duration
+            pBuf->wDuration = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_AA, cbFrameLength, byPktTyp, wCurrentRate, bNeedAck, byFBOption)); //0:RTSDuration_aa, 0:5G, 0: 5G OFDMData
+    	    pBuf->wRTSDuration_f0 = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_AA_F0, cbFrameLength, byPktTyp, wCurrentRate, bNeedAck, byFBOption)); //5:RTSDuration_aa_f0, 0:5G, 0: 5G OFDMData
+    	    pBuf->wRTSDuration_f1 = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_AA_F1, cbFrameLength, byPktTyp, wCurrentRate, bNeedAck, byFBOption)); //7:RTSDuration_aa_f1, 0:5G, 0:
+    	    pBuf->Data.wDurationID = pBuf->wDuration;
+    	    //Get RTS Frame body
+            pBuf->Data.wFrameControl = TYPE_CTL_RTS;//0x00B4
+
+            if ((pDevice->eOPMode == OP_MODE_ADHOC) ||
+                (pDevice->eOPMode == OP_MODE_AP)) {
+                MEMvCopy(&(pBuf->Data.abyRA[0]), &(psEthHeader->abyDstAddr[0]), U_ETHER_ADDR_LEN);
+            }
+            else {
+                MEMvCopy(&(pBuf->Data.abyRA[0]), &(pDevice->abyBSSID[0]), U_ETHER_ADDR_LEN);
+            }
+            if (pDevice->eOPMode == OP_MODE_AP) {
+                MEMvCopy(&(pBuf->Data.abyTA[0]), &(pDevice->abyBSSID[0]), U_ETHER_ADDR_LEN);
+            }
+            else {
+                MEMvCopy(&(pBuf->Data.abyTA[0]), &(psEthHeader->abySrcAddr[0]), U_ETHER_ADDR_LEN);
+            }
+        }
+    }
+    else if (byPktTyp == PK_TYPE_11B) {
+        PSRTS_ab pBuf = (PSRTS_ab)pvRTS;
+        //Get SignalField,ServiceField,Length
+        BBvCaculateParameter(pDevice, uRTSFrameLen, pDevice->byTopCCKBasicRate, PK_TYPE_11B,
+            (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField), (PBYTE)&(pBuf->bySignalField)
+        );
+        pBuf->wTransmitLength = cpu_to_le16(wLen);
+        //Get Duration
+        pBuf->wDuration = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_BB, cbFrameLength, byPktTyp, wCurrentRate, bNeedAck, byFBOption)); //0:RTSDuration_bb, 1:2.4G, 1:CCKData
+        pBuf->Data.wDurationID = pBuf->wDuration;
+        //Get RTS Frame body
+        pBuf->Data.wFrameControl = TYPE_CTL_RTS;//0x00B4
+
+
+        if ((pDevice->eOPMode == OP_MODE_ADHOC) ||
+            (pDevice->eOPMode == OP_MODE_AP)) {
+            MEMvCopy(&(pBuf->Data.abyRA[0]), &(psEthHeader->abyDstAddr[0]), U_ETHER_ADDR_LEN);
+        }
+        else {
+            MEMvCopy(&(pBuf->Data.abyRA[0]), &(pDevice->abyBSSID[0]), U_ETHER_ADDR_LEN);
+        }
+
+        if (pDevice->eOPMode == OP_MODE_AP) {
+            MEMvCopy(&(pBuf->Data.abyTA[0]), &(pDevice->abyBSSID[0]), U_ETHER_ADDR_LEN);
+        }
+        else {
+            MEMvCopy(&(pBuf->Data.abyTA[0]), &(psEthHeader->abySrcAddr[0]), U_ETHER_ADDR_LEN);
+        }
+    }
+}
+
+static
+VOID
+s_vFillCTSHead (
+    IN PSDevice pDevice,
+    IN UINT     uDMAIdx,
+    IN BYTE     byPktTyp,
+    IN PVOID    pvCTS,
+    IN UINT     cbFrameLength,
+    IN BOOL     bNeedAck,
+    IN BOOL     bDisCRC,
+    IN WORD     wCurrentRate,
+    IN BYTE     byFBOption
+    )
+{
+    UINT uCTSFrameLen = 14;
+    WORD  wLen = 0x0000;
+
+    if (pvCTS == NULL) {
+        return;
+    }
+
+    if (bDisCRC) {
+        // When CRCDIS bit is on, H/W forgot to generate FCS for CTS frame,
+        // in this case we need to decrease its length by 4.
+        uCTSFrameLen -= 4;
+    }
+
+    if (byPktTyp == PK_TYPE_11GB || byPktTyp == PK_TYPE_11GA) {
+        if (byFBOption != AUTO_FB_NONE && uDMAIdx != TYPE_ATIMDMA && uDMAIdx != TYPE_BEACONDMA) {
+            // Auto Fall back
+            PSCTS_FB pBuf = (PSCTS_FB)pvCTS;
+            //Get SignalField,ServiceField,Length
+            BBvCaculateParameter(pDevice, uCTSFrameLen, pDevice->byTopCCKBasicRate, PK_TYPE_11B,
+                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField_b), (PBYTE)&(pBuf->bySignalField_b)
+            );
+
+
+            pBuf->wTransmitLength_b = cpu_to_le16(wLen);
+
+            pBuf->wDuration_ba = (WORD)s_uGetRTSCTSDuration(pDevice, CTSDUR_BA, cbFrameLength, byPktTyp, wCurrentRate, bNeedAck, byFBOption); //3:CTSDuration_ba, 1:2.4G, 2,3:2.4G OFDM Data
+            pBuf->wDuration_ba += pDevice->wCTSDuration;
+            pBuf->wDuration_ba = cpu_to_le16(pBuf->wDuration_ba);
+            //Get CTSDuration_ba_f0
+            pBuf->wCTSDuration_ba_f0 = (WORD)s_uGetRTSCTSDuration(pDevice, CTSDUR_BA_F0, cbFrameLength, byPktTyp, wCurrentRate, bNeedAck, byFBOption); //8:CTSDuration_ba_f0, 1:2.4G, 2,3:2.4G OFDM Data
+            pBuf->wCTSDuration_ba_f0 += pDevice->wCTSDuration;
+            pBuf->wCTSDuration_ba_f0 = cpu_to_le16(pBuf->wCTSDuration_ba_f0);
+            //Get CTSDuration_ba_f1
+            pBuf->wCTSDuration_ba_f1 = (WORD)s_uGetRTSCTSDuration(pDevice, CTSDUR_BA_F1, cbFrameLength, byPktTyp, wCurrentRate, bNeedAck, byFBOption); //9:CTSDuration_ba_f1, 1:2.4G, 2,3:2.4G OFDM Data
+            pBuf->wCTSDuration_ba_f1 += pDevice->wCTSDuration;
+            pBuf->wCTSDuration_ba_f1 = cpu_to_le16(pBuf->wCTSDuration_ba_f1);
+            //Get CTS Frame body
+            pBuf->Data.wDurationID = pBuf->wDuration_ba;
+            pBuf->Data.wFrameControl = TYPE_CTL_CTS;//0x00C4
+            pBuf->Data.wReserved = 0x0000;
+            MEMvCopy(&(pBuf->Data.abyRA[0]), &(pDevice->abyCurrentNetAddr[0]), U_ETHER_ADDR_LEN);
+
+        } else { //if (byFBOption != AUTO_FB_NONE && uDMAIdx != TYPE_ATIMDMA && uDMAIdx != TYPE_BEACONDMA)
+            PSCTS pBuf = (PSCTS)pvCTS;
+            //Get SignalField,ServiceField,Length
+            BBvCaculateParameter(pDevice, uCTSFrameLen, pDevice->byTopCCKBasicRate, PK_TYPE_11B,
+                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField_b), (PBYTE)&(pBuf->bySignalField_b)
+            );
+            pBuf->wTransmitLength_b = cpu_to_le16(wLen);
+            //Get CTSDuration_ba
+            pBuf->wDuration_ba = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, CTSDUR_BA, cbFrameLength, byPktTyp, wCurrentRate, bNeedAck, byFBOption)); //3:CTSDuration_ba, 1:2.4G, 2,3:2.4G OFDM Data
+            pBuf->wDuration_ba += pDevice->wCTSDuration;
+            pBuf->wDuration_ba = cpu_to_le16(pBuf->wDuration_ba);
+
+            //Get CTS Frame body
+            pBuf->Data.wDurationID = pBuf->wDuration_ba;
+            pBuf->Data.wFrameControl = TYPE_CTL_CTS;//0x00C4
+            pBuf->Data.wReserved = 0x0000;
+            MEMvCopy(&(pBuf->Data.abyRA[0]), &(pDevice->abyCurrentNetAddr[0]), U_ETHER_ADDR_LEN);
+        }
+    }
+}
+
+
+
+
+
+
+/*+
+ *
+ * Description:
+ *      Generate FIFO control for MAC & Baseband controller
+ *
+ * Parameters:
+ *  In:
+ *      pDevice         - Pointer to adpater
+ *      pTxDataHead     - Transmit Data Buffer
+ *      pTxBufHead      - pTxBufHead
+ *      pvRrvTime        - pvRrvTime
+ *      pvRTS            - RTS Buffer
+ *      pCTS            - CTS Buffer
+ *      cbFrameSize     - Transmit Data Length (Hdr+Payload+FCS)
+ *      bNeedACK        - If need ACK
+ *      uDescIdx        - Desc Index
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+-*/
+// UINT            cbFrameSize,//Hdr+Payload+FCS
+static
+VOID
+s_vGenerateTxParameter (
+    IN PSDevice         pDevice,
+    IN BYTE             byPktTyp,
+    IN PVOID            pTxBufHead,
+    IN PVOID            pvRrvTime,
+    IN PVOID            pvRTS,
+    IN PVOID            pvCTS,
+    IN UINT             cbFrameSize,
+    IN BOOL             bNeedACK,
+    IN UINT             uDMAIdx,
+    IN PSEthernetHeader psEthHeader,
+    IN WORD             wCurrentRate
+    )
+{
+    UINT cbMACHdLen = WLAN_HDR_ADDR3_LEN; //24
+    WORD wFifoCtl;
+    BOOL bDisCRC = FALSE;
+    BYTE byFBOption = AUTO_FB_NONE;
+//    WORD wCurrentRate = pDevice->wCurrentRate;
+
+    //DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"s_vGenerateTxParameter...\n");
+    PSTxBufHead pFifoHead = (PSTxBufHead)pTxBufHead;
+    pFifoHead->wReserved = wCurrentRate;
+    wFifoCtl = pFifoHead->wFIFOCtl;
+
+    if (wFifoCtl & FIFOCTL_CRCDIS) {
+        bDisCRC = TRUE;
+    }
+
+    if (wFifoCtl & FIFOCTL_AUTO_FB_0) {
+        byFBOption = AUTO_FB_0;
+    }
+    else if (wFifoCtl & FIFOCTL_AUTO_FB_1) {
+        byFBOption = AUTO_FB_1;
+    }
+
+    if (pDevice->bLongHeader)
+        cbMACHdLen = WLAN_HDR_ADDR3_LEN + 6;
+
+    if (byPktTyp == PK_TYPE_11GB || byPktTyp == PK_TYPE_11GA) {
+
+        if (pvRTS != NULL) { //RTS_need
+            //Fill RsvTime
+            if (pvRrvTime) {
+                PSRrvTime_gRTS pBuf = (PSRrvTime_gRTS)pvRrvTime;
+                pBuf->wRTSTxRrvTime_aa = cpu_to_le16((WORD)s_uGetRTSCTSRsvTime(pDevice, 2, byPktTyp, cbFrameSize, wCurrentRate));//2:RTSTxRrvTime_aa, 1:2.4GHz
+                pBuf->wRTSTxRrvTime_ba = cpu_to_le16((WORD)s_uGetRTSCTSRsvTime(pDevice, 1, byPktTyp, cbFrameSize, wCurrentRate));//1:RTSTxRrvTime_ba, 1:2.4GHz
+                pBuf->wRTSTxRrvTime_bb = cpu_to_le16((WORD)s_uGetRTSCTSRsvTime(pDevice, 0, byPktTyp, cbFrameSize, wCurrentRate));//0:RTSTxRrvTime_bb, 1:2.4GHz
+                pBuf->wTxRrvTime_a = cpu_to_le16((WORD) s_uGetTxRsvTime(pDevice, byPktTyp, cbFrameSize, wCurrentRate, bNeedACK));//2.4G OFDM
+                pBuf->wTxRrvTime_b = cpu_to_le16((WORD) s_uGetTxRsvTime(pDevice, PK_TYPE_11B, cbFrameSize, pDevice->byTopCCKBasicRate, bNeedACK));//1:CCK
+            }
+            //Fill RTS
+            s_vFillRTSHead(pDevice, byPktTyp, pvRTS, cbFrameSize, bNeedACK, bDisCRC, psEthHeader, wCurrentRate, byFBOption);
+        }
+        else {//RTS_needless, PCF mode
+
+            //Fill RsvTime
+            if (pvRrvTime) {
+                PSRrvTime_gCTS pBuf = (PSRrvTime_gCTS)pvRrvTime;
+                pBuf->wTxRrvTime_a = cpu_to_le16((WORD)s_uGetTxRsvTime(pDevice, byPktTyp, cbFrameSize, wCurrentRate, bNeedACK));//2.4G OFDM
+                pBuf->wTxRrvTime_b = cpu_to_le16((WORD)s_uGetTxRsvTime(pDevice, PK_TYPE_11B, cbFrameSize, pDevice->byTopCCKBasicRate, bNeedACK));//1:CCK
+                pBuf->wCTSTxRrvTime_ba = cpu_to_le16((WORD)s_uGetRTSCTSRsvTime(pDevice, 3, byPktTyp, cbFrameSize, wCurrentRate));//3:CTSTxRrvTime_Ba, 1:2.4GHz
+            }
+
+
+            //Fill CTS
+            s_vFillCTSHead(pDevice, uDMAIdx, byPktTyp, pvCTS, cbFrameSize, bNeedACK, bDisCRC, wCurrentRate, byFBOption);
+        }
+    }
+    else if (byPktTyp == PK_TYPE_11A) {
+
+        if (pvRTS != NULL) {//RTS_need, non PCF mode
+            //Fill RsvTime
+            if (pvRrvTime) {
+                PSRrvTime_ab pBuf = (PSRrvTime_ab)pvRrvTime;
+                pBuf->wRTSTxRrvTime = cpu_to_le16((WORD)s_uGetRTSCTSRsvTime(pDevice, 2, byPktTyp, cbFrameSize, wCurrentRate));//2:RTSTxRrvTime_aa, 0:5GHz
+                pBuf->wTxRrvTime = cpu_to_le16((WORD)s_uGetTxRsvTime(pDevice, byPktTyp, cbFrameSize, wCurrentRate, bNeedACK));//0:OFDM
+            }
+            //Fill RTS
+            s_vFillRTSHead(pDevice, byPktTyp, pvRTS, cbFrameSize, bNeedACK, bDisCRC, psEthHeader, wCurrentRate, byFBOption);
+        }
+        else if (pvRTS == NULL) {//RTS_needless, non PCF mode
+            //Fill RsvTime
+            if (pvRrvTime) {
+                PSRrvTime_ab pBuf = (PSRrvTime_ab)pvRrvTime;
+                pBuf->wTxRrvTime = cpu_to_le16((WORD)s_uGetTxRsvTime(pDevice, PK_TYPE_11A, cbFrameSize, wCurrentRate, bNeedACK)); //0:OFDM
+            }
+        }
+    }
+    else if (byPktTyp == PK_TYPE_11B) {
+
+        if ((pvRTS != NULL)) {//RTS_need, non PCF mode
+            //Fill RsvTime
+            if (pvRrvTime) {
+                PSRrvTime_ab pBuf = (PSRrvTime_ab)pvRrvTime;
+                pBuf->wRTSTxRrvTime = cpu_to_le16((WORD)s_uGetRTSCTSRsvTime(pDevice, 0, byPktTyp, cbFrameSize, wCurrentRate));//0:RTSTxRrvTime_bb, 1:2.4GHz
+                pBuf->wTxRrvTime = cpu_to_le16((WORD)s_uGetTxRsvTime(pDevice, PK_TYPE_11B, cbFrameSize, wCurrentRate, bNeedACK));//1:CCK
+            }
+            //Fill RTS
+            s_vFillRTSHead(pDevice, byPktTyp, pvRTS, cbFrameSize, bNeedACK, bDisCRC, psEthHeader, wCurrentRate, byFBOption);
+        }
+        else { //RTS_needless, non PCF mode
+            //Fill RsvTime
+            if (pvRrvTime) {
+                PSRrvTime_ab pBuf = (PSRrvTime_ab)pvRrvTime;
+                pBuf->wTxRrvTime = cpu_to_le16((WORD)s_uGetTxRsvTime(pDevice, PK_TYPE_11B, cbFrameSize, wCurrentRate, bNeedACK)); //1:CCK
+            }
+        }
+    }
+    //DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"s_vGenerateTxParameter END.\n");
+}
+/*
+    PBYTE pbyBuffer,//point to pTxBufHead
+    WORD  wFragType,//00:Non-Frag, 01:Start, 02:Mid, 03:Last
+    UINT  cbFragmentSize,//Hdr+payoad+FCS
+*/
+static
+VOID
+s_vFillFragParameter(
+    IN PSDevice pDevice,
+    IN PBYTE    pbyBuffer,
+    IN UINT     uTxType,
+    IN PVOID    pvtdCurr,
+    IN WORD     wFragType,
+    IN UINT     cbReqCount
+    )
+{
+    PSTxBufHead pTxBufHead = (PSTxBufHead) pbyBuffer;
+    //DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"s_vFillFragParameter...\n");
+
+    if (uTxType == TYPE_SYNCDMA) {
+        //PSTxSyncDesc ptdCurr = (PSTxSyncDesc)s_pvGetTxDescHead(pDevice, uTxType, uCurIdx);
+        PSTxSyncDesc ptdCurr = (PSTxSyncDesc)pvtdCurr;
+
+         //Set FIFOCtl & TimeStamp in TxSyncDesc
+        ptdCurr->m_wFIFOCtl = pTxBufHead->wFIFOCtl;
+        ptdCurr->m_wTimeStamp = pTxBufHead->wTimeStamp;
+        //Set TSR1 & ReqCount in TxDescHead
+        ptdCurr->m_td1TD1.wReqCount = cpu_to_le16((WORD)(cbReqCount));
+        if (wFragType == FRAGCTL_ENDFRAG) { //Last Fragmentation
+            ptdCurr->m_td1TD1.byTCR |= (TCR_STP | TCR_EDP | EDMSDU);
+        }
+        else {
+            ptdCurr->m_td1TD1.byTCR |= (TCR_STP | TCR_EDP);
+        }
+    }
+    else {
+        //PSTxDesc ptdCurr = (PSTxDesc)s_pvGetTxDescHead(pDevice, uTxType, uCurIdx);
+        PSTxDesc ptdCurr = (PSTxDesc)pvtdCurr;
+        //Set TSR1 & ReqCount in TxDescHead
+        ptdCurr->m_td1TD1.wReqCount = cpu_to_le16((WORD)(cbReqCount));
+        if (wFragType == FRAGCTL_ENDFRAG) { //Last Fragmentation
+            ptdCurr->m_td1TD1.byTCR |= (TCR_STP | TCR_EDP | EDMSDU);
+        }
+        else {
+            ptdCurr->m_td1TD1.byTCR |= (TCR_STP | TCR_EDP);
+        }
+    }
+
+    pTxBufHead->wFragCtl |= (WORD)wFragType;//0x0001; //0000 0000 0000 0001
+
+    //DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"s_vFillFragParameter END\n");
+}
+
+static
+UINT
+s_cbFillTxBufHead (
+    IN  PSDevice         pDevice,
+    IN  BYTE             byPktTyp,
+    IN  PBYTE            pbyTxBufferAddr,
+    IN  UINT             cbFrameBodySize,
+    IN  UINT             uDMAIdx,
+    IN  PSTxDesc         pHeadTD,
+    IN  PSEthernetHeader psEthHeader,
+    IN  PBYTE            pPacket,
+    IN  BOOL             bNeedEncrypt,
+    IN  PSKeyItem        pTransmitKey,
+    IN  UINT             uNodeIndex,
+    OUT PUINT            puMACfragNum
+    )
+{
+    UINT           cbMACHdLen;
+    UINT           cbFrameSize;
+    UINT           cbFragmentSize; //Hdr+(IV)+payoad+(MIC)+(ICV)+FCS
+    UINT           cbFragPayloadSize;
+    UINT           cbLastFragmentSize; //Hdr+(IV)+payoad+(MIC)+(ICV)+FCS
+    UINT           cbLastFragPayloadSize;
+    UINT           uFragIdx;
+    PBYTE          pbyPayloadHead;
+    PBYTE          pbyIVHead;
+    PBYTE          pbyMacHdr;
+    WORD           wFragType; //00:Non-Frag, 01:Start, 10:Mid, 11:Last
+    UINT           uDuration;
+    PBYTE          pbyBuffer;
+//    UINT           uKeyEntryIdx = NUM_KEY_ENTRY+1;
+//    BYTE           byKeySel = 0xFF;
+    UINT           cbIVlen = 0;
+    UINT           cbICVlen = 0;
+    UINT           cbMIClen = 0;
+    UINT           cbFCSlen = 4;
+    UINT           cb802_1_H_len = 0;
+    UINT           uLength = 0;
+    UINT           uTmpLen = 0;
+//    BYTE           abyTmp[8];
+//    DWORD          dwCRC;
+    UINT           cbMICHDR = 0;
+    DWORD          dwMICKey0, dwMICKey1;
+    DWORD          dwMIC_Priority;
+    PDWORD         pdwMIC_L;
+    PDWORD         pdwMIC_R;
+    DWORD          dwSafeMIC_L, dwSafeMIC_R; //Fix "Last Frag Size" < "MIC length".
+    BOOL           bMIC2Frag = FALSE;
+    UINT           uMICFragLen = 0;
+    UINT           uMACfragNum = 1;
+    UINT           uPadding = 0;
+    UINT           cbReqCount = 0;
+
+    BOOL           bNeedACK;
+    BOOL           bRTS;
+    BOOL           bIsAdhoc;
+    PBYTE          pbyType;
+    PSTxDesc       ptdCurr;
+    PSTxBufHead    psTxBufHd = (PSTxBufHead) pbyTxBufferAddr;
+//    UINT           tmpDescIdx;
+    UINT           cbHeaderLength = 0;
+    PVOID          pvRrvTime;
+    PSMICHDRHead   pMICHDR;
+    PVOID          pvRTS;
+    PVOID          pvCTS;
+    PVOID          pvTxDataHd;
+    WORD           wTxBufSize;   // FFinfo size
+    UINT           uTotalCopyLength = 0;
+    BYTE           byFBOption = AUTO_FB_NONE;
+    BOOL           bIsWEP256 = FALSE;
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+
+
+    pvRrvTime = pMICHDR = pvRTS = pvCTS = pvTxDataHd = NULL;
+
+    //DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"s_cbFillTxBufHead...\n");
+    if ((pDevice->eOPMode == OP_MODE_ADHOC) ||
+        (pDevice->eOPMode == OP_MODE_AP)) {
+
+        if (IS_MULTICAST_ADDRESS(&(psEthHeader->abyDstAddr[0])) ||
+            IS_BROADCAST_ADDRESS(&(psEthHeader->abyDstAddr[0]))) {
+            bNeedACK = FALSE;
+        }
+        else {
+            bNeedACK = TRUE;
+        }
+        bIsAdhoc = TRUE;
+    }
+    else {
+        // MSDUs in Infra mode always need ACK
+        bNeedACK = TRUE;
+        bIsAdhoc = FALSE;
+    }
+
+    if (pDevice->bLongHeader)
+        cbMACHdLen = WLAN_HDR_ADDR3_LEN + 6;
+    else
+        cbMACHdLen = WLAN_HDR_ADDR3_LEN;
+
+
+    if ((bNeedEncrypt == TRUE) && (pTransmitKey != NULL)) {
+        if (pTransmitKey->byCipherSuite == KEY_CTL_WEP) {
+            cbIVlen = 4;
+            cbICVlen = 4;
+            if (pTransmitKey->uKeyLength == WLAN_WEP232_KEYLEN) {
+                bIsWEP256 = TRUE;
+            }
+        }
+        if (pTransmitKey->byCipherSuite == KEY_CTL_TKIP) {
+            cbIVlen = 8;//IV+ExtIV
+            cbMIClen = 8;
+            cbICVlen = 4;
+        }
+        if (pTransmitKey->byCipherSuite == KEY_CTL_CCMP) {
+            cbIVlen = 8;//RSN Header
+            cbICVlen = 8;//MIC
+            cbMICHDR = sizeof(SMICHDRHead);
+        }
+        if (pDevice->byLocalID > REV_ID_VT3253_A1) {
+            //MAC Header should be padding 0 to DW alignment.
+            uPadding = 4 - (cbMACHdLen%4);
+            uPadding %= 4;
+        }
+    }
+
+
+    cbFrameSize = cbMACHdLen + cbIVlen + (cbFrameBodySize + cbMIClen) + cbICVlen + cbFCSlen;
+
+    if ((bNeedACK == FALSE) ||
+        (cbFrameSize < pDevice->wRTSThreshold) ||
+        ((cbFrameSize >= pDevice->wFragmentationThreshold) && (pDevice->wFragmentationThreshold <= pDevice->wRTSThreshold))
+        ) {
+        bRTS = FALSE;
+    }
+    else {
+        bRTS = TRUE;
+        psTxBufHd->wFIFOCtl |= (FIFOCTL_RTS | FIFOCTL_LRETRY);
+    }
+    //
+    // Use for AUTO FALL BACK
+    //
+    if (psTxBufHd->wFIFOCtl & FIFOCTL_AUTO_FB_0) {
+        byFBOption = AUTO_FB_0;
+    }
+    else if (psTxBufHd->wFIFOCtl & FIFOCTL_AUTO_FB_1) {
+        byFBOption = AUTO_FB_1;
+    }
+
+    //////////////////////////////////////////////////////
+    //Set RrvTime/RTS/CTS Buffer
+    wTxBufSize = sizeof(STxBufHead);
+    if (byPktTyp == PK_TYPE_11GB || byPktTyp == PK_TYPE_11GA) {//802.11g packet
+
+        if (byFBOption == AUTO_FB_NONE) {
+            if (bRTS == TRUE) {//RTS_need
+                pvRrvTime = (PSRrvTime_gRTS) (pbyTxBufferAddr + wTxBufSize);
+                pMICHDR = (PSMICHDRHead) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_gRTS));
+                pvRTS = (PSRTS_g) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_gRTS) + cbMICHDR);
+                pvCTS = NULL;
+                pvTxDataHd = (PSTxDataHead_g) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_gRTS) + cbMICHDR + sizeof(SRTS_g));
+                cbHeaderLength = wTxBufSize + sizeof(SRrvTime_gRTS) + cbMICHDR + sizeof(SRTS_g) + sizeof(STxDataHead_g);
+            }
+            else { //RTS_needless
+                pvRrvTime = (PSRrvTime_gCTS) (pbyTxBufferAddr + wTxBufSize);
+                pMICHDR = (PSMICHDRHead) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_gCTS));
+                pvRTS = NULL;
+                pvCTS = (PSCTS) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_gCTS) + cbMICHDR);
+                pvTxDataHd = (PSTxDataHead_g) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_gCTS) + cbMICHDR + sizeof(SCTS));
+                cbHeaderLength = wTxBufSize + sizeof(SRrvTime_gCTS) + cbMICHDR + sizeof(SCTS) + sizeof(STxDataHead_g);
+            }
+        } else {
+            // Auto Fall Back
+            if (bRTS == TRUE) {//RTS_need
+                pvRrvTime = (PSRrvTime_gRTS) (pbyTxBufferAddr + wTxBufSize);
+                pMICHDR = (PSMICHDRHead) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_gRTS));
+                pvRTS = (PSRTS_g_FB) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_gRTS) + cbMICHDR);
+                pvCTS = NULL;
+                pvTxDataHd = (PSTxDataHead_g_FB) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_gRTS) + cbMICHDR + sizeof(SRTS_g_FB));
+                cbHeaderLength = wTxBufSize + sizeof(SRrvTime_gRTS) + cbMICHDR + sizeof(SRTS_g_FB) + sizeof(STxDataHead_g_FB);
+            }
+            else { //RTS_needless
+                pvRrvTime = (PSRrvTime_gCTS) (pbyTxBufferAddr + wTxBufSize);
+                pMICHDR = (PSMICHDRHead) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_gCTS));
+                pvRTS = NULL;
+                pvCTS = (PSCTS_FB) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_gCTS) + cbMICHDR);
+                pvTxDataHd = (PSTxDataHead_g_FB) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_gCTS) + cbMICHDR + sizeof(SCTS_FB));
+                cbHeaderLength = wTxBufSize + sizeof(SRrvTime_gCTS) + cbMICHDR + sizeof(SCTS_FB) + sizeof(STxDataHead_g_FB);
+            }
+        } // Auto Fall Back
+    }
+    else {//802.11a/b packet
+
+        if (byFBOption == AUTO_FB_NONE) {
+            if (bRTS == TRUE) {
+                pvRrvTime = (PSRrvTime_ab) (pbyTxBufferAddr + wTxBufSize);
+                pMICHDR = (PSMICHDRHead) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_ab));
+                pvRTS = (PSRTS_ab) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_ab) + cbMICHDR);
+                pvCTS = NULL;
+                pvTxDataHd = (PSTxDataHead_ab) (pbyTxBufferAddr + wTxBufSize + sizeof(PSRrvTime_ab) + cbMICHDR + sizeof(SRTS_ab));
+                cbHeaderLength = wTxBufSize + sizeof(PSRrvTime_ab) + cbMICHDR + sizeof(SRTS_ab) + sizeof(STxDataHead_ab);
+            }
+            else { //RTS_needless, need MICHDR
+                pvRrvTime = (PSRrvTime_ab) (pbyTxBufferAddr + wTxBufSize);
+                pMICHDR = (PSMICHDRHead) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_ab));
+                pvRTS = NULL;
+                pvCTS = NULL;
+                pvTxDataHd = (PSTxDataHead_ab) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_ab) + cbMICHDR);
+                cbHeaderLength = wTxBufSize + sizeof(SRrvTime_ab) + cbMICHDR + sizeof(STxDataHead_ab);
+            }
+        } else {
+            // Auto Fall Back
+            if (bRTS == TRUE) {//RTS_need
+                pvRrvTime = (PSRrvTime_ab) (pbyTxBufferAddr + wTxBufSize);
+                pMICHDR = (PSMICHDRHead) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_ab));
+                pvRTS = (PSRTS_a_FB) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_ab) + cbMICHDR);
+                pvCTS = NULL;
+                pvTxDataHd = (PSTxDataHead_a_FB) (pbyTxBufferAddr + wTxBufSize + sizeof(PSRrvTime_ab) + cbMICHDR + sizeof(SRTS_a_FB));
+                cbHeaderLength = wTxBufSize + sizeof(PSRrvTime_ab) + cbMICHDR + sizeof(SRTS_a_FB) + sizeof(STxDataHead_a_FB);
+            }
+            else { //RTS_needless
+                pvRrvTime = (PSRrvTime_ab) (pbyTxBufferAddr + wTxBufSize);
+                pMICHDR = (PSMICHDRHead) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_ab));
+                pvRTS = NULL;
+                pvCTS = NULL;
+                pvTxDataHd = (PSTxDataHead_a_FB) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_ab) + cbMICHDR);
+                cbHeaderLength = wTxBufSize + sizeof(SRrvTime_ab) + cbMICHDR + sizeof(STxDataHead_a_FB);
+            }
+        } // Auto Fall Back
+    }
+    ZERO_MEMORY((PVOID)(pbyTxBufferAddr + wTxBufSize), (cbHeaderLength - wTxBufSize));
+
+//////////////////////////////////////////////////////////////////
+    if ((bNeedEncrypt == TRUE) && (pTransmitKey != NULL) && (pTransmitKey->byCipherSuite == KEY_CTL_TKIP)) {
+        if (pDevice->pMgmt->eAuthenMode == WMAC_AUTH_WPANONE) {
+            dwMICKey0 = *(PDWORD)(&pTransmitKey->abyKey[16]);
+            dwMICKey1 = *(PDWORD)(&pTransmitKey->abyKey[20]);
+        }
+        else if ((pTransmitKey->dwKeyIndex & AUTHENTICATOR_KEY) != 0) {
+            dwMICKey0 = *(PDWORD)(&pTransmitKey->abyKey[16]);
+            dwMICKey1 = *(PDWORD)(&pTransmitKey->abyKey[20]);
+        }
+        else {
+            dwMICKey0 = *(PDWORD)(&pTransmitKey->abyKey[24]);
+            dwMICKey1 = *(PDWORD)(&pTransmitKey->abyKey[28]);
+        }
+        // DO Software Michael
+        MIC_vInit(dwMICKey0, dwMICKey1);
+        MIC_vAppend((PBYTE)&(psEthHeader->abyDstAddr[0]), 12);
+        dwMIC_Priority = 0;
+        MIC_vAppend((PBYTE)&dwMIC_Priority, 4);
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"MIC KEY: %lX, %lX\n", dwMICKey0, dwMICKey1);
+    }
+
+///////////////////////////////////////////////////////////////////
+
+    pbyMacHdr = (PBYTE)(pbyTxBufferAddr + cbHeaderLength);
+    pbyPayloadHead = (PBYTE)(pbyMacHdr + cbMACHdLen + uPadding + cbIVlen);
+    pbyIVHead = (PBYTE)(pbyMacHdr + cbMACHdLen + uPadding);
+
+    if ((cbFrameSize > pDevice->wFragmentationThreshold) && (bNeedACK == TRUE) && (bIsWEP256 == FALSE)) {
+        // Fragmentation
+        // FragThreshold = Fragment size(Hdr+(IV)+fragment payload+(MIC)+(ICV)+FCS)
+        cbFragmentSize = pDevice->wFragmentationThreshold;
+        cbFragPayloadSize = cbFragmentSize - cbMACHdLen - cbIVlen - cbICVlen - cbFCSlen;
+        //FragNum = (FrameSize-(Hdr+FCS))/(Fragment Size -(Hrd+FCS)))
+        uMACfragNum = (WORD) ((cbFrameBodySize + cbMIClen) / cbFragPayloadSize);
+        cbLastFragPayloadSize = (cbFrameBodySize + cbMIClen) % cbFragPayloadSize;
+        if (cbLastFragPayloadSize == 0) {
+            cbLastFragPayloadSize = cbFragPayloadSize;
+        } else {
+            uMACfragNum++;
+        }
+        //[Hdr+(IV)+last fragment payload+(MIC)+(ICV)+FCS]
+        cbLastFragmentSize = cbMACHdLen + cbLastFragPayloadSize + cbIVlen + cbICVlen + cbFCSlen;
+
+        for (uFragIdx = 0; uFragIdx < uMACfragNum; uFragIdx ++) {
+            if (uFragIdx == 0) {
+                //=========================
+                //    Start Fragmentation
+                //=========================
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Start Fragmentation...\n");
+                wFragType = FRAGCTL_STAFRAG;
+
+
+                //Fill FIFO,RrvTime,RTS,and CTS
+                s_vGenerateTxParameter(pDevice, byPktTyp, (PVOID)psTxBufHd, pvRrvTime, pvRTS, pvCTS,
+                                       cbFragmentSize, bNeedACK, uDMAIdx, psEthHeader, pDevice->wCurrentRate);
+                //Fill DataHead
+                uDuration = s_uFillDataHead(pDevice, byPktTyp, pvTxDataHd, cbFragmentSize, uDMAIdx, bNeedACK,
+                                            uFragIdx, cbLastFragmentSize, uMACfragNum, byFBOption, pDevice->wCurrentRate);
+                // Generate TX MAC Header
+                vGenerateMACHeader(pDevice, pbyMacHdr, (WORD)uDuration, psEthHeader, bNeedEncrypt,
+                                   wFragType, uDMAIdx, uFragIdx);
+
+                if (bNeedEncrypt == TRUE) {
+                    //Fill TXKEY
+                    s_vFillTxKey(pDevice, (PBYTE)(psTxBufHd->adwTxKey), pbyIVHead, pTransmitKey,
+                                 pbyMacHdr, (WORD)cbFragPayloadSize, (PBYTE)pMICHDR);
+                    //Fill IV(ExtIV,RSNHDR)
+                    if (pDevice->bEnableHostWEP) {
+                        pMgmt->sNodeDBTable[uNodeIndex].dwTSC47_16 = pTransmitKey->dwTSC47_16;
+                        pMgmt->sNodeDBTable[uNodeIndex].wTSC15_0 = pTransmitKey->wTSC15_0;
+                    }
+                }
+
+
+                // 802.1H
+                if (ntohs(psEthHeader->wType) > MAX_DATA_LEN) {
+                    if ((psEthHeader->wType == TYPE_PKT_IPX) ||
+                        (psEthHeader->wType == cpu_to_le16(0xF380))) {
+                        MEMvCopy((PBYTE) (pbyPayloadHead), &pDevice->abySNAP_Bridgetunnel[0], 6);
+                    }
+                    else {
+                        MEMvCopy((PBYTE) (pbyPayloadHead), &pDevice->abySNAP_RFC1042[0], 6);
+                    }
+                    pbyType = (PBYTE) (pbyPayloadHead + 6);
+                    MEMvCopy(pbyType, &(psEthHeader->wType), sizeof(WORD));
+                    cb802_1_H_len = 8;
+                }
+
+                cbReqCount = cbHeaderLength + cbMACHdLen + uPadding + cbIVlen + cbFragPayloadSize;
+                //---------------------------
+                // S/W or H/W Encryption
+                //---------------------------
+                //Fill MICHDR
+                //if (pDevice->bAES) {
+                //    s_vFillMICHDR(pDevice, (PBYTE)pMICHDR, pbyMacHdr, (WORD)cbFragPayloadSize);
+                //}
+                //cbReqCount += s_uDoEncryption(pDevice, psEthHeader, (PVOID)psTxBufHd, byKeySel,
+                //                                pbyPayloadHead, (WORD)cbFragPayloadSize, uDMAIdx);
+
+
+
+                //pbyBuffer = (PBYTE)pDevice->aamTxBuf[uDMAIdx][uDescIdx].pbyVAddr;
+                pbyBuffer = (PBYTE)pHeadTD->pTDInfo->buf;
+
+                uLength = cbHeaderLength + cbMACHdLen + uPadding + cbIVlen + cb802_1_H_len;
+                //copy TxBufferHeader + MacHeader to desc
+                MEMvCopy(pbyBuffer, (PVOID)psTxBufHd, uLength);
+
+                // Copy the Packet into a tx Buffer
+                MEMvCopy((pbyBuffer + uLength), (pPacket + 14), (cbFragPayloadSize - cb802_1_H_len));
+
+
+                uTotalCopyLength += cbFragPayloadSize - cb802_1_H_len;
+
+                if ((bNeedEncrypt == TRUE) && (pTransmitKey != NULL) && (pTransmitKey->byCipherSuite == KEY_CTL_TKIP)) {
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Start MIC: %d\n", cbFragPayloadSize);
+                    MIC_vAppend((pbyBuffer + uLength - cb802_1_H_len), cbFragPayloadSize);
+
+                }
+
+                //---------------------------
+                // S/W Encryption
+                //---------------------------
+                if ((pDevice->byLocalID <= REV_ID_VT3253_A1)) {
+                    if (bNeedEncrypt) {
+                        s_vSWencryption(pDevice, pTransmitKey, (pbyBuffer + uLength - cb802_1_H_len), (WORD)cbFragPayloadSize);
+                        cbReqCount += cbICVlen;
+                    }
+                }
+
+                ptdCurr = (PSTxDesc)pHeadTD;
+                //--------------------
+                //1.Set TSR1 & ReqCount in TxDescHead
+                //2.Set FragCtl in TxBufferHead
+                //3.Set Frame Control
+                //4.Set Sequence Control
+                //5.Get S/W generate FCS
+                //--------------------
+                s_vFillFragParameter(pDevice, pbyBuffer, uDMAIdx, (PVOID)ptdCurr, wFragType, cbReqCount);
+
+                ptdCurr->pTDInfo->dwReqCount = cbReqCount - uPadding;
+                ptdCurr->pTDInfo->dwHeaderLength = cbHeaderLength;
+                ptdCurr->pTDInfo->skb_dma = ptdCurr->pTDInfo->buf_dma;
+                ptdCurr->buff_addr = cpu_to_le32(ptdCurr->pTDInfo->skb_dma);
+                pDevice->iTDUsed[uDMAIdx]++;
+                pHeadTD = ptdCurr->next;
+            }
+            else if (uFragIdx == (uMACfragNum-1)) {
+                //=========================
+                //    Last Fragmentation
+                //=========================
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Last Fragmentation...\n");
+                //tmpDescIdx = (uDescIdx + uFragIdx) % pDevice->cbTD[uDMAIdx];
+
+                wFragType = FRAGCTL_ENDFRAG;
+
+                //Fill FIFO,RrvTime,RTS,and CTS
+                s_vGenerateTxParameter(pDevice, byPktTyp, (PVOID)psTxBufHd, pvRrvTime, pvRTS, pvCTS,
+                                       cbLastFragmentSize, bNeedACK, uDMAIdx, psEthHeader, pDevice->wCurrentRate);
+                //Fill DataHead
+                uDuration = s_uFillDataHead(pDevice, byPktTyp, pvTxDataHd, cbLastFragmentSize, uDMAIdx, bNeedACK,
+                                            uFragIdx, cbLastFragmentSize, uMACfragNum, byFBOption, pDevice->wCurrentRate);
+
+                // Generate TX MAC Header
+                vGenerateMACHeader(pDevice, pbyMacHdr, (WORD)uDuration, psEthHeader, bNeedEncrypt,
+                                   wFragType, uDMAIdx, uFragIdx);
+
+                if (bNeedEncrypt == TRUE) {
+                    //Fill TXKEY
+                    s_vFillTxKey(pDevice, (PBYTE)(psTxBufHd->adwTxKey), pbyIVHead, pTransmitKey,
+                                 pbyMacHdr, (WORD)cbLastFragPayloadSize, (PBYTE)pMICHDR);
+
+                    if (pDevice->bEnableHostWEP) {
+                        pMgmt->sNodeDBTable[uNodeIndex].dwTSC47_16 = pTransmitKey->dwTSC47_16;
+                        pMgmt->sNodeDBTable[uNodeIndex].wTSC15_0 = pTransmitKey->wTSC15_0;
+                    }
+
+                }
+
+
+                cbReqCount = cbHeaderLength + cbMACHdLen + uPadding + cbIVlen + cbLastFragPayloadSize;
+                //---------------------------
+                // S/W or H/W Encryption
+                //---------------------------
+
+
+
+                pbyBuffer = (PBYTE)pHeadTD->pTDInfo->buf;
+                //pbyBuffer = (PBYTE)pDevice->aamTxBuf[uDMAIdx][tmpDescIdx].pbyVAddr;
+
+                uLength = cbHeaderLength + cbMACHdLen + uPadding + cbIVlen;
+
+                //copy TxBufferHeader + MacHeader to desc
+                MEMvCopy(pbyBuffer, (PVOID)psTxBufHd, uLength);
+
+                // Copy the Packet into a tx Buffer
+                if (bMIC2Frag == FALSE) {
+
+                    MEMvCopy((pbyBuffer + uLength),
+                             (pPacket + 14 + uTotalCopyLength),
+                             (cbLastFragPayloadSize - cbMIClen)
+                             );
+                    //TODO check uTmpLen !
+                    uTmpLen = cbLastFragPayloadSize - cbMIClen;
+
+                }
+                if ((bNeedEncrypt == TRUE) && (pTransmitKey != NULL) && (pTransmitKey->byCipherSuite == KEY_CTL_TKIP)) {
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"LAST: uMICFragLen:%d, cbLastFragPayloadSize:%d, uTmpLen:%d\n",
+                                   uMICFragLen, cbLastFragPayloadSize, uTmpLen);
+
+                    if (bMIC2Frag == FALSE) {
+                        if (uTmpLen != 0)
+                            MIC_vAppend((pbyBuffer + uLength), uTmpLen);
+                        pdwMIC_L = (PDWORD)(pbyBuffer + uLength + uTmpLen);
+                        pdwMIC_R = (PDWORD)(pbyBuffer + uLength + uTmpLen + 4);
+                        MIC_vGetMIC(pdwMIC_L, pdwMIC_R);
+                        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Last MIC:%lX, %lX\n", *pdwMIC_L, *pdwMIC_R);
+                    } else {
+                        if (uMICFragLen >= 4) {
+                            MEMvCopy((pbyBuffer + uLength), ((PBYTE)&dwSafeMIC_R + (uMICFragLen - 4)),
+                                     (cbMIClen - uMICFragLen));
+                            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"LAST: uMICFragLen >= 4: %X, %d\n",
+                                           *(PBYTE)((PBYTE)&dwSafeMIC_R + (uMICFragLen - 4)),
+                                           (cbMIClen - uMICFragLen));
+
+                        } else {
+                            MEMvCopy((pbyBuffer + uLength), ((PBYTE)&dwSafeMIC_L + uMICFragLen),
+                                     (4 - uMICFragLen));
+                            MEMvCopy((pbyBuffer + uLength + (4 - uMICFragLen)), &dwSafeMIC_R, 4);
+                            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"LAST: uMICFragLen < 4: %X, %d\n",
+                                           *(PBYTE)((PBYTE)&dwSafeMIC_R + uMICFragLen - 4),
+                                           (cbMIClen - uMICFragLen));
+                        }
+                        /*
+                        for (ii = 0; ii < cbLastFragPayloadSize + 8 + 24; ii++) {
+                            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"%02x ", *((PBYTE)((pbyBuffer + uLength) + ii - 8 - 24)));
+                        }
+                        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\n\n");
+                        */
+                    }
+                    MIC_vUnInit();
+                } else {
+                    ASSERT(uTmpLen == (cbLastFragPayloadSize - cbMIClen));
+                }
+
+
+                //---------------------------
+                // S/W Encryption
+                //---------------------------
+                if ((pDevice->byLocalID <= REV_ID_VT3253_A1)) {
+                    if (bNeedEncrypt) {
+                        s_vSWencryption(pDevice, pTransmitKey, (pbyBuffer + uLength), (WORD)cbLastFragPayloadSize);
+                        cbReqCount += cbICVlen;
+                    }
+                }
+
+                ptdCurr = (PSTxDesc)pHeadTD;
+
+                //--------------------
+                //1.Set TSR1 & ReqCount in TxDescHead
+                //2.Set FragCtl in TxBufferHead
+                //3.Set Frame Control
+                //4.Set Sequence Control
+                //5.Get S/W generate FCS
+                //--------------------
+
+
+                s_vFillFragParameter(pDevice, pbyBuffer, uDMAIdx, (PVOID)ptdCurr, wFragType, cbReqCount);
+
+                ptdCurr->pTDInfo->dwReqCount = cbReqCount - uPadding;
+                ptdCurr->pTDInfo->dwHeaderLength = cbHeaderLength;
+                ptdCurr->pTDInfo->skb_dma = ptdCurr->pTDInfo->buf_dma;
+                ptdCurr->buff_addr = cpu_to_le32(ptdCurr->pTDInfo->skb_dma);
+                pDevice->iTDUsed[uDMAIdx]++;
+                pHeadTD = ptdCurr->next;
+
+            }
+            else {
+                //=========================
+                //    Middle Fragmentation
+                //=========================
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Middle Fragmentation...\n");
+                //tmpDescIdx = (uDescIdx + uFragIdx) % pDevice->cbTD[uDMAIdx];
+
+                wFragType = FRAGCTL_MIDFRAG;
+
+                //Fill FIFO,RrvTime,RTS,and CTS
+                s_vGenerateTxParameter(pDevice, byPktTyp, (PVOID)psTxBufHd, pvRrvTime, pvRTS, pvCTS,
+                                       cbFragmentSize, bNeedACK, uDMAIdx, psEthHeader, pDevice->wCurrentRate);
+                //Fill DataHead
+                uDuration = s_uFillDataHead(pDevice, byPktTyp, pvTxDataHd, cbFragmentSize, uDMAIdx, bNeedACK,
+                                            uFragIdx, cbLastFragmentSize, uMACfragNum, byFBOption, pDevice->wCurrentRate);
+
+                // Generate TX MAC Header
+                vGenerateMACHeader(pDevice, pbyMacHdr, (WORD)uDuration, psEthHeader, bNeedEncrypt,
+                                   wFragType, uDMAIdx, uFragIdx);
+
+
+                if (bNeedEncrypt == TRUE) {
+                    //Fill TXKEY
+                    s_vFillTxKey(pDevice, (PBYTE)(psTxBufHd->adwTxKey), pbyIVHead, pTransmitKey,
+                                 pbyMacHdr, (WORD)cbFragPayloadSize, (PBYTE)pMICHDR);
+
+                    if (pDevice->bEnableHostWEP) {
+                        pMgmt->sNodeDBTable[uNodeIndex].dwTSC47_16 = pTransmitKey->dwTSC47_16;
+                        pMgmt->sNodeDBTable[uNodeIndex].wTSC15_0 = pTransmitKey->wTSC15_0;
+                    }
+                }
+
+                cbReqCount = cbHeaderLength + cbMACHdLen + uPadding + cbIVlen + cbFragPayloadSize;
+                //---------------------------
+                // S/W or H/W Encryption
+                //---------------------------
+                //Fill MICHDR
+                //if (pDevice->bAES) {
+                //    s_vFillMICHDR(pDevice, (PBYTE)pMICHDR, pbyMacHdr, (WORD)cbFragPayloadSize);
+                //}
+                //cbReqCount += s_uDoEncryption(pDevice, psEthHeader, (PVOID)psTxBufHd, byKeySel,
+                //                              pbyPayloadHead, (WORD)cbFragPayloadSize, uDMAIdx);
+
+
+                pbyBuffer = (PBYTE)pHeadTD->pTDInfo->buf;
+                //pbyBuffer = (PBYTE)pDevice->aamTxBuf[uDMAIdx][tmpDescIdx].pbyVAddr;
+
+
+                uLength = cbHeaderLength + cbMACHdLen + uPadding + cbIVlen;
+
+                //copy TxBufferHeader + MacHeader to desc
+                MEMvCopy(pbyBuffer, (PVOID)psTxBufHd, uLength);
+
+                // Copy the Packet into a tx Buffer
+                MEMvCopy((pbyBuffer + uLength),
+                         (pPacket + 14 + uTotalCopyLength),
+                         cbFragPayloadSize
+                        );
+                uTmpLen = cbFragPayloadSize;
+
+                uTotalCopyLength += uTmpLen;
+
+                if ((bNeedEncrypt == TRUE) && (pTransmitKey != NULL) && (pTransmitKey->byCipherSuite == KEY_CTL_TKIP)) {
+
+                    MIC_vAppend((pbyBuffer + uLength), uTmpLen);
+
+                    if (uTmpLen < cbFragPayloadSize) {
+                        bMIC2Frag = TRUE;
+                        uMICFragLen = cbFragPayloadSize - uTmpLen;
+                        ASSERT(uMICFragLen < cbMIClen);
+
+                        pdwMIC_L = (PDWORD)(pbyBuffer + uLength + uTmpLen);
+                        pdwMIC_R = (PDWORD)(pbyBuffer + uLength + uTmpLen + 4);
+                        MIC_vGetMIC(pdwMIC_L, pdwMIC_R);
+                        dwSafeMIC_L = *pdwMIC_L;
+                        dwSafeMIC_R = *pdwMIC_R;
+
+                        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"MIDDLE: uMICFragLen:%d, cbFragPayloadSize:%d, uTmpLen:%d\n",
+                                       uMICFragLen, cbFragPayloadSize, uTmpLen);
+                        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Fill MIC in Middle frag [%d]\n", uMICFragLen);
+                        /*
+                        for (ii = 0; ii < uMICFragLen; ii++) {
+                            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"%02x ", *((PBYTE)((pbyBuffer + uLength + uTmpLen) + ii)));
+                        }
+                        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\n");
+                        */
+                        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Get MIC:%lX, %lX\n", *pdwMIC_L, *pdwMIC_R);
+                    }
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Middle frag len: %d\n", uTmpLen);
+                    /*
+                    for (ii = 0; ii < uTmpLen; ii++) {
+                        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"%02x ", *((PBYTE)((pbyBuffer + uLength) + ii)));
+                    }
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\n\n");
+                    */
+
+                } else {
+                    ASSERT(uTmpLen == (cbFragPayloadSize));
+                }
+
+                if ((pDevice->byLocalID <= REV_ID_VT3253_A1)) {
+                    if (bNeedEncrypt) {
+                        s_vSWencryption(pDevice, pTransmitKey, (pbyBuffer + uLength), (WORD)cbFragPayloadSize);
+                        cbReqCount += cbICVlen;
+                    }
+                }
+
+                ptdCurr = (PSTxDesc)pHeadTD;
+
+                //--------------------
+                //1.Set TSR1 & ReqCount in TxDescHead
+                //2.Set FragCtl in TxBufferHead
+                //3.Set Frame Control
+                //4.Set Sequence Control
+                //5.Get S/W generate FCS
+                //--------------------
+
+                s_vFillFragParameter(pDevice, pbyBuffer, uDMAIdx, (PVOID)ptdCurr, wFragType, cbReqCount);
+
+                ptdCurr->pTDInfo->dwReqCount = cbReqCount - uPadding;
+                ptdCurr->pTDInfo->dwHeaderLength = cbHeaderLength;
+                ptdCurr->pTDInfo->skb_dma = ptdCurr->pTDInfo->buf_dma;
+                ptdCurr->buff_addr = cpu_to_le32(ptdCurr->pTDInfo->skb_dma);
+                pDevice->iTDUsed[uDMAIdx]++;
+                pHeadTD = ptdCurr->next;
+            }
+        }  // for (uMACfragNum)
+    }
+    else {
+        //=========================
+        //    No Fragmentation
+        //=========================
+        //DEVICE_PRTGRP03(("No Fragmentation...\n"));
+        //DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"No Fragmentation...\n");
+        wFragType = FRAGCTL_NONFRAG;
+
+        //Set FragCtl in TxBufferHead
+        psTxBufHd->wFragCtl |= (WORD)wFragType;
+
+        //Fill FIFO,RrvTime,RTS,and CTS
+        s_vGenerateTxParameter(pDevice, byPktTyp, (PVOID)psTxBufHd, pvRrvTime, pvRTS, pvCTS,
+                               cbFrameSize, bNeedACK, uDMAIdx, psEthHeader, pDevice->wCurrentRate);
+        //Fill DataHead
+        uDuration = s_uFillDataHead(pDevice, byPktTyp, pvTxDataHd, cbFrameSize, uDMAIdx, bNeedACK,
+                                    0, 0, uMACfragNum, byFBOption, pDevice->wCurrentRate);
+
+        // Generate TX MAC Header
+        vGenerateMACHeader(pDevice, pbyMacHdr, (WORD)uDuration, psEthHeader, bNeedEncrypt,
+                           wFragType, uDMAIdx, 0);
+
+        if (bNeedEncrypt == TRUE) {
+            //Fill TXKEY
+            s_vFillTxKey(pDevice, (PBYTE)(psTxBufHd->adwTxKey), pbyIVHead, pTransmitKey,
+                         pbyMacHdr, (WORD)cbFrameBodySize, (PBYTE)pMICHDR);
+
+            if (pDevice->bEnableHostWEP) {
+                pMgmt->sNodeDBTable[uNodeIndex].dwTSC47_16 = pTransmitKey->dwTSC47_16;
+                pMgmt->sNodeDBTable[uNodeIndex].wTSC15_0 = pTransmitKey->wTSC15_0;
+            }
+        }
+
+        // 802.1H
+        if (ntohs(psEthHeader->wType) > MAX_DATA_LEN) {
+            if ((psEthHeader->wType == TYPE_PKT_IPX) ||
+                (psEthHeader->wType == cpu_to_le16(0xF380))) {
+                MEMvCopy((PBYTE) (pbyPayloadHead), &pDevice->abySNAP_Bridgetunnel[0], 6);
+            }
+            else {
+                MEMvCopy((PBYTE) (pbyPayloadHead), &pDevice->abySNAP_RFC1042[0], 6);
+            }
+            pbyType = (PBYTE) (pbyPayloadHead + 6);
+            MEMvCopy(pbyType, &(psEthHeader->wType), sizeof(WORD));
+            cb802_1_H_len = 8;
+        }
+
+        cbReqCount = cbHeaderLength + cbMACHdLen + uPadding + cbIVlen + (cbFrameBodySize + cbMIClen);
+        //---------------------------
+        // S/W or H/W Encryption
+        //---------------------------
+        //Fill MICHDR
+        //if (pDevice->bAES) {
+        //    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Fill MICHDR...\n");
+        //    s_vFillMICHDR(pDevice, (PBYTE)pMICHDR, pbyMacHdr, (WORD)cbFrameBodySize);
+        //}
+
+        pbyBuffer = (PBYTE)pHeadTD->pTDInfo->buf;
+        //pbyBuffer = (PBYTE)pDevice->aamTxBuf[uDMAIdx][uDescIdx].pbyVAddr;
+
+        uLength = cbHeaderLength + cbMACHdLen + uPadding + cbIVlen + cb802_1_H_len;
+
+        //copy TxBufferHeader + MacHeader to desc
+        MEMvCopy(pbyBuffer, (PVOID)psTxBufHd, uLength);
+
+        // Copy the Packet into a tx Buffer
+        MEMvCopy((pbyBuffer + uLength),
+                 (pPacket + 14),
+                 cbFrameBodySize - cb802_1_H_len
+                 );
+
+        if ((bNeedEncrypt == TRUE) && (pTransmitKey != NULL) && (pTransmitKey->byCipherSuite == KEY_CTL_TKIP)){
+
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Length:%d, %d\n", cbFrameBodySize - cb802_1_H_len, uLength);
+            /*
+            for (ii = 0; ii < (cbFrameBodySize - cb802_1_H_len); ii++) {
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"%02x ", *((PBYTE)((pbyBuffer + uLength) + ii)));
+            }
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\n");
+            */
+
+            MIC_vAppend((pbyBuffer + uLength - cb802_1_H_len), cbFrameBodySize);
+
+            pdwMIC_L = (PDWORD)(pbyBuffer + uLength - cb802_1_H_len + cbFrameBodySize);
+            pdwMIC_R = (PDWORD)(pbyBuffer + uLength - cb802_1_H_len + cbFrameBodySize + 4);
+
+            MIC_vGetMIC(pdwMIC_L, pdwMIC_R);
+            MIC_vUnInit();
+
+
+            if (pDevice->bTxMICFail == TRUE) {
+                *pdwMIC_L = 0;
+                *pdwMIC_R = 0;
+                pDevice->bTxMICFail = FALSE;
+            }
+
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"uLength: %d, %d\n", uLength, cbFrameBodySize);
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"cbReqCount:%d, %d, %d, %d\n", cbReqCount, cbHeaderLength, uPadding, cbIVlen);
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"MIC:%lx, %lx\n", *pdwMIC_L, *pdwMIC_R);
+/*
+            for (ii = 0; ii < 8; ii++) {
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"%02x ", *(((PBYTE)(pdwMIC_L) + ii)));
+            }
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\n");
+*/
+
+        }
+
+
+        if ((pDevice->byLocalID <= REV_ID_VT3253_A1)){
+            if (bNeedEncrypt) {
+                s_vSWencryption(pDevice, pTransmitKey, (pbyBuffer + uLength - cb802_1_H_len),
+                                (WORD)(cbFrameBodySize + cbMIClen));
+                cbReqCount += cbICVlen;
+            }
+        }
+
+
+        ptdCurr = (PSTxDesc)pHeadTD;
+
+        ptdCurr->pTDInfo->dwReqCount = cbReqCount - uPadding;
+        ptdCurr->pTDInfo->dwHeaderLength = cbHeaderLength;
+        ptdCurr->pTDInfo->skb_dma = ptdCurr->pTDInfo->buf_dma;
+        ptdCurr->buff_addr = cpu_to_le32(ptdCurr->pTDInfo->skb_dma);
+  	    //Set TSR1 & ReqCount in TxDescHead
+        ptdCurr->m_td1TD1.byTCR |= (TCR_STP | TCR_EDP | EDMSDU);
+        ptdCurr->m_td1TD1.wReqCount = cpu_to_le16((WORD)(cbReqCount));
+
+        pDevice->iTDUsed[uDMAIdx]++;
+
+
+//   DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" ptdCurr->m_dwReserved0[%d] ptdCurr->m_dwReserved1[%d].\n", ptdCurr->pTDInfo->dwReqCount, ptdCurr->pTDInfo->dwHeaderLength);
+//   DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" cbHeaderLength[%d]\n", cbHeaderLength);
+
+    }
+    *puMACfragNum = uMACfragNum;
+    //DEVICE_PRTGRP03(("s_cbFillTxBufHead END\n"));
+    return cbHeaderLength;
+}
+
+
+VOID
+vGenerateFIFOHeader (
+    IN  PSDevice         pDevice,
+    IN  BYTE             byPktTyp,
+    IN  PBYTE            pbyTxBufferAddr,
+    IN  BOOL             bNeedEncrypt,
+    IN  UINT             cbPayloadSize,
+    IN  UINT             uDMAIdx,
+    IN  PSTxDesc         pHeadTD,
+    IN  PSEthernetHeader psEthHeader,
+    IN  PBYTE            pPacket,
+    IN  PSKeyItem        pTransmitKey,
+    IN  UINT             uNodeIndex,
+    OUT PUINT            puMACfragNum,
+    OUT PUINT            pcbHeaderSize
+    )
+{
+    UINT            wTxBufSize;       // FFinfo size
+    BOOL            bNeedACK;
+    BOOL            bIsAdhoc;
+    WORD            cbMacHdLen;
+    PSTxBufHead     pTxBufHead = (PSTxBufHead) pbyTxBufferAddr;
+
+    wTxBufSize = sizeof(STxBufHead);
+
+    ZERO_MEMORY(pTxBufHead, wTxBufSize);
+    //Set FIFOCTL_NEEDACK
+
+    if ((pDevice->eOPMode == OP_MODE_ADHOC) ||
+        (pDevice->eOPMode == OP_MODE_AP)) {
+        if (IS_MULTICAST_ADDRESS(&(psEthHeader->abyDstAddr[0])) ||
+            IS_BROADCAST_ADDRESS(&(psEthHeader->abyDstAddr[0]))) {
+            bNeedACK = FALSE;
+            pTxBufHead->wFIFOCtl = pTxBufHead->wFIFOCtl & (~FIFOCTL_NEEDACK);
+        }
+        else {
+            bNeedACK = TRUE;
+            pTxBufHead->wFIFOCtl |= FIFOCTL_NEEDACK;
+        }
+        bIsAdhoc = TRUE;
+    }
+    else {
+        // MSDUs in Infra mode always need ACK
+        bNeedACK = TRUE;
+        pTxBufHead->wFIFOCtl |= FIFOCTL_NEEDACK;
+        bIsAdhoc = FALSE;
+    }
+
+
+    pTxBufHead->wFIFOCtl |= FIFOCTL_TMOEN;
+    pTxBufHead->wTimeStamp = cpu_to_le16(DEFAULT_MSDU_LIFETIME_RES_64us);
+
+    //Set FIFOCTL_LHEAD
+    if (pDevice->bLongHeader)
+        pTxBufHead->wFIFOCtl |= FIFOCTL_LHEAD;
+
+    //Set FIFOCTL_GENINT
+
+    pTxBufHead->wFIFOCtl |= FIFOCTL_GENINT;
+
+
+    //Set FIFOCTL_ISDMA0
+    if (TYPE_TXDMA0 == uDMAIdx) {
+        pTxBufHead->wFIFOCtl |= FIFOCTL_ISDMA0;
+    }
+
+    //Set FRAGCTL_MACHDCNT
+    if (pDevice->bLongHeader) {
+        cbMacHdLen = WLAN_HDR_ADDR3_LEN + 6;
+    } else {
+        cbMacHdLen = WLAN_HDR_ADDR3_LEN;
+    }
+    pTxBufHead->wFragCtl |= cpu_to_le16((WORD)(cbMacHdLen << 10));
+
+    //Set packet type
+    if (byPktTyp == PK_TYPE_11A) {//0000 0000 0000 0000
+        ;
+    }
+    else if (byPktTyp == PK_TYPE_11B) {//0000 0001 0000 0000
+        pTxBufHead->wFIFOCtl |= FIFOCTL_11B;
+    }
+    else if (byPktTyp == PK_TYPE_11GB) {//0000 0010 0000 0000
+        pTxBufHead->wFIFOCtl |= FIFOCTL_11GB;
+    }
+    else if (byPktTyp == PK_TYPE_11GA) {//0000 0011 0000 0000
+        pTxBufHead->wFIFOCtl |= FIFOCTL_11GA;
+    }
+    //Set FIFOCTL_GrpAckPolicy
+    if (pDevice->bGrpAckPolicy == TRUE) {//0000 0100 0000 0000
+        pTxBufHead->wFIFOCtl |=	FIFOCTL_GRPACK;
+    }
+
+    //Set Auto Fallback Ctl
+    if (pDevice->wCurrentRate >= RATE_18M) {
+        if (pDevice->byAutoFBCtrl == AUTO_FB_0) {
+            pTxBufHead->wFIFOCtl |= FIFOCTL_AUTO_FB_0;
+        } else if (pDevice->byAutoFBCtrl == AUTO_FB_1) {
+            pTxBufHead->wFIFOCtl |= FIFOCTL_AUTO_FB_1;
+        }
+    }
+
+    //Set FRAGCTL_WEPTYP
+    pDevice->bAES = FALSE;
+
+    //Set FRAGCTL_WEPTYP
+    if (pDevice->byLocalID > REV_ID_VT3253_A1) {
+        if ((bNeedEncrypt) && (pTransmitKey != NULL))  { //WEP enabled
+            if (pTransmitKey->byCipherSuite == KEY_CTL_TKIP) {
+                pTxBufHead->wFragCtl |= FRAGCTL_TKIP;
+            }
+            else if (pTransmitKey->byCipherSuite == KEY_CTL_WEP) { //WEP40 or WEP104
+                if (pTransmitKey->uKeyLength != WLAN_WEP232_KEYLEN)
+                    pTxBufHead->wFragCtl |= FRAGCTL_LEGACY;
+            }
+            else if (pTransmitKey->byCipherSuite == KEY_CTL_CCMP) { //CCMP
+                pTxBufHead->wFragCtl |= FRAGCTL_AES;
+            }
+        }
+    }
+
+#ifdef	PLICE_DEBUG
+	//printk("Func:vGenerateFIFOHeader:TxDataRate is %d,TxPower is %d\n",pDevice->wCurrentRate,pDevice->byCurPwr);
+
+	//if (pDevice->wCurrentRate <= 3)
+	//{
+	//	RFbRawSetPower(pDevice,36,pDevice->wCurrentRate);
+	//}
+	//else
+
+	RFbSetPower(pDevice, pDevice->wCurrentRate, pDevice->byCurrentCh);
+#endif
+		//if (pDevice->wCurrentRate == 3)
+		//pDevice->byCurPwr = 46;
+		pTxBufHead->byTxPower = pDevice->byCurPwr;
+
+
+
+
+/*
+    if(pDevice->bEnableHostWEP)
+        pTxBufHead->wFragCtl &=  ~(FRAGCTL_TKIP | FRAGCTL_LEGACY |FRAGCTL_AES);
+*/
+    *pcbHeaderSize = s_cbFillTxBufHead(pDevice, byPktTyp, pbyTxBufferAddr, cbPayloadSize,
+                                   uDMAIdx, pHeadTD, psEthHeader, pPacket, bNeedEncrypt,
+                                   pTransmitKey, uNodeIndex, puMACfragNum);
+
+    return;
+}
+
+
+
+
+/*+
+ *
+ * Description:
+ *      Translate 802.3 to 802.11 header
+ *
+ * Parameters:
+ *  In:
+ *      pDevice         - Pointer to adpater
+ *      dwTxBufferAddr  - Transmit Buffer
+ *      pPacket         - Packet from upper layer
+ *      cbPacketSize    - Transmit Data Length
+ *  Out:
+ *      pcbHeadSize         - Header size of MAC&Baseband control and 802.11 Header
+ *      pcbAppendPayload    - size of append payload for 802.1H translation
+ *
+ * Return Value: none
+ *
+-*/
+
+VOID
+vGenerateMACHeader (
+    IN PSDevice         pDevice,
+    IN PBYTE            pbyBufferAddr,
+    IN WORD             wDuration,
+    IN PSEthernetHeader psEthHeader,
+    IN BOOL             bNeedEncrypt,
+    IN WORD             wFragType,
+    IN UINT             uDMAIdx,
+    IN UINT             uFragIdx
+    )
+{
+    PS802_11Header  pMACHeader = (PS802_11Header)pbyBufferAddr;
+
+    ZERO_MEMORY(pMACHeader, (sizeof(S802_11Header)));  //- sizeof(pMACHeader->dwIV)));
+
+    if (uDMAIdx == TYPE_ATIMDMA) {
+    	pMACHeader->wFrameCtl = TYPE_802_11_ATIM;
+    } else {
+        pMACHeader->wFrameCtl = TYPE_802_11_DATA;
+    }
+
+    if (pDevice->eOPMode == OP_MODE_AP) {
+        MEMvCopy(&(pMACHeader->abyAddr1[0]), &(psEthHeader->abyDstAddr[0]), U_ETHER_ADDR_LEN);
+        MEMvCopy(&(pMACHeader->abyAddr2[0]), &(pDevice->abyBSSID[0]), U_ETHER_ADDR_LEN);
+        MEMvCopy(&(pMACHeader->abyAddr3[0]), &(psEthHeader->abySrcAddr[0]), U_ETHER_ADDR_LEN);
+        pMACHeader->wFrameCtl |= FC_FROMDS;
+    }
+    else {
+        if (pDevice->eOPMode == OP_MODE_ADHOC) {
+            MEMvCopy(&(pMACHeader->abyAddr1[0]), &(psEthHeader->abyDstAddr[0]), U_ETHER_ADDR_LEN);
+            MEMvCopy(&(pMACHeader->abyAddr2[0]), &(psEthHeader->abySrcAddr[0]), U_ETHER_ADDR_LEN);
+            MEMvCopy(&(pMACHeader->abyAddr3[0]), &(pDevice->abyBSSID[0]), U_ETHER_ADDR_LEN);
+        }
+        else {
+            MEMvCopy(&(pMACHeader->abyAddr3[0]), &(psEthHeader->abyDstAddr[0]), U_ETHER_ADDR_LEN);
+            MEMvCopy(&(pMACHeader->abyAddr2[0]), &(psEthHeader->abySrcAddr[0]), U_ETHER_ADDR_LEN);
+            MEMvCopy(&(pMACHeader->abyAddr1[0]), &(pDevice->abyBSSID[0]), U_ETHER_ADDR_LEN);
+            pMACHeader->wFrameCtl |= FC_TODS;
+        }
+    }
+
+    if (bNeedEncrypt)
+        pMACHeader->wFrameCtl |= cpu_to_le16((WORD)WLAN_SET_FC_ISWEP(1));
+
+    pMACHeader->wDurationID = cpu_to_le16(wDuration);
+
+    if (pDevice->bLongHeader) {
+        PWLAN_80211HDR_A4 pMACA4Header  = (PWLAN_80211HDR_A4) pbyBufferAddr;
+        pMACHeader->wFrameCtl |= (FC_TODS | FC_FROMDS);
+        MEMvCopy(pMACA4Header->abyAddr4, pDevice->abyBSSID, WLAN_ADDR_LEN);
+    }
+    pMACHeader->wSeqCtl = cpu_to_le16(pDevice->wSeqCounter << 4);
+
+    //Set FragNumber in Sequence Control
+    pMACHeader->wSeqCtl |= cpu_to_le16((WORD)uFragIdx);
+
+    if ((wFragType == FRAGCTL_ENDFRAG) || (wFragType == FRAGCTL_NONFRAG)) {
+        pDevice->wSeqCounter++;
+        if (pDevice->wSeqCounter > 0x0fff)
+            pDevice->wSeqCounter = 0;
+    }
+
+    if ((wFragType == FRAGCTL_STAFRAG) || (wFragType == FRAGCTL_MIDFRAG)) { //StartFrag or MidFrag
+        pMACHeader->wFrameCtl |= FC_MOREFRAG;
+    }
+}
+
+
+
+
+
+
+CMD_STATUS csMgmt_xmit(PSDevice pDevice, PSTxMgmtPacket pPacket) {
+
+    PSTxDesc        pFrstTD;
+    BYTE            byPktTyp;
+    PBYTE           pbyTxBufferAddr;
+    PVOID           pvRTS;
+    PSCTS           pCTS;
+    PVOID           pvTxDataHd;
+    UINT            uDuration;
+    UINT            cbReqCount;
+    PS802_11Header  pMACHeader;
+    UINT            cbHeaderSize;
+    UINT            cbFrameBodySize;
+    BOOL            bNeedACK;
+    BOOL            bIsPSPOLL = FALSE;
+    PSTxBufHead     pTxBufHead;
+    UINT            cbFrameSize;
+    UINT            cbIVlen = 0;
+    UINT            cbICVlen = 0;
+    UINT            cbMIClen = 0;
+    UINT            cbFCSlen = 4;
+    UINT            uPadding = 0;
+    WORD            wTxBufSize;
+    UINT            cbMacHdLen;
+    SEthernetHeader sEthHeader;
+    PVOID           pvRrvTime;
+    PVOID           pMICHDR;
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+    WORD            wCurrentRate = RATE_1M;
+
+
+    if (AVAIL_TD(pDevice, TYPE_TXDMA0) <= 0) {
+        return CMD_STATUS_RESOURCES;
+    }
+
+    pFrstTD = pDevice->apCurrTD[TYPE_TXDMA0];
+    pbyTxBufferAddr = (PBYTE)pFrstTD->pTDInfo->buf;
+    cbFrameBodySize = pPacket->cbPayloadLen;
+    pTxBufHead = (PSTxBufHead) pbyTxBufferAddr;
+    wTxBufSize = sizeof(STxBufHead);
+    memset(pTxBufHead, 0, wTxBufSize);
+
+    if (pDevice->eCurrentPHYType == PHY_TYPE_11A) {
+        wCurrentRate = RATE_6M;
+        byPktTyp = PK_TYPE_11A;
+    } else {
+        wCurrentRate = RATE_1M;
+        byPktTyp = PK_TYPE_11B;
+    }
+
+    // SetPower will cause error power TX state for OFDM Date packet in TX buffer.
+    // 2004.11.11 Kyle -- Using OFDM power to tx MngPkt will decrease the connection capability.
+    //                    And cmd timer will wait data pkt TX finish before scanning so it's OK
+    //                    to set power here.
+    if (pDevice->pMgmt->eScanState != WMAC_NO_SCANNING) {
+
+		RFbSetPower(pDevice, wCurrentRate, pDevice->byCurrentCh);
+    } else {
+        RFbSetPower(pDevice, wCurrentRate, pMgmt->uCurrChannel);
+    }
+    pTxBufHead->byTxPower = pDevice->byCurPwr;
+    //+++++++++++++++++++++ Patch VT3253 A1 performance +++++++++++++++++++++++++++
+    if (pDevice->byFOETuning) {
+        if ((pPacket->p80211Header->sA3.wFrameCtl & TYPE_DATE_NULL) == TYPE_DATE_NULL) {
+            wCurrentRate = RATE_24M;
+            byPktTyp = PK_TYPE_11GA;
+        }
+    }
+
+    //Set packet type
+    if (byPktTyp == PK_TYPE_11A) {//0000 0000 0000 0000
+        pTxBufHead->wFIFOCtl = 0;
+    }
+    else if (byPktTyp == PK_TYPE_11B) {//0000 0001 0000 0000
+        pTxBufHead->wFIFOCtl |= FIFOCTL_11B;
+    }
+    else if (byPktTyp == PK_TYPE_11GB) {//0000 0010 0000 0000
+        pTxBufHead->wFIFOCtl |= FIFOCTL_11GB;
+    }
+    else if (byPktTyp == PK_TYPE_11GA) {//0000 0011 0000 0000
+        pTxBufHead->wFIFOCtl |= FIFOCTL_11GA;
+    }
+
+    pTxBufHead->wFIFOCtl |= FIFOCTL_TMOEN;
+    pTxBufHead->wTimeStamp = cpu_to_le16(DEFAULT_MGN_LIFETIME_RES_64us);
+
+
+    if (IS_MULTICAST_ADDRESS(&(pPacket->p80211Header->sA3.abyAddr1[0])) ||
+        IS_BROADCAST_ADDRESS(&(pPacket->p80211Header->sA3.abyAddr1[0]))) {
+        bNeedACK = FALSE;
+    }
+    else {
+        bNeedACK = TRUE;
+        pTxBufHead->wFIFOCtl |= FIFOCTL_NEEDACK;
+    };
+
+    if ((pMgmt->eCurrMode == WMAC_MODE_ESS_AP) ||
+        (pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) ) {
+
+        pTxBufHead->wFIFOCtl |= FIFOCTL_LRETRY;
+        //Set Preamble type always long
+        //pDevice->byPreambleType = PREAMBLE_LONG;
+        // probe-response don't retry
+        //if ((pPacket->p80211Header->sA4.wFrameCtl & TYPE_SUBTYPE_MASK) == TYPE_MGMT_PROBE_RSP) {
+        //     bNeedACK = FALSE;
+        //     pTxBufHead->wFIFOCtl  &= (~FIFOCTL_NEEDACK);
+        //}
+    }
+
+    pTxBufHead->wFIFOCtl |= (FIFOCTL_GENINT | FIFOCTL_ISDMA0);
+
+    if ((pPacket->p80211Header->sA4.wFrameCtl & TYPE_SUBTYPE_MASK) == TYPE_CTL_PSPOLL) {
+        bIsPSPOLL = TRUE;
+        cbMacHdLen = WLAN_HDR_ADDR2_LEN;
+    } else {
+        cbMacHdLen = WLAN_HDR_ADDR3_LEN;
+    }
+
+    //Set FRAGCTL_MACHDCNT
+    pTxBufHead->wFragCtl |= cpu_to_le16((WORD)(cbMacHdLen << 10));
+
+    // Notes:
+    // Although spec says MMPDU can be fragmented; In most case,
+    // no one will send a MMPDU under fragmentation. With RTS may occur.
+    pDevice->bAES = FALSE;  //Set FRAGCTL_WEPTYP
+
+    if (WLAN_GET_FC_ISWEP(pPacket->p80211Header->sA4.wFrameCtl) != 0) {
+        if (pDevice->eEncryptionStatus == Ndis802_11Encryption1Enabled) {
+            cbIVlen = 4;
+            cbICVlen = 4;
+    	    pTxBufHead->wFragCtl |= FRAGCTL_LEGACY;
+        }
+        else if (pDevice->eEncryptionStatus == Ndis802_11Encryption2Enabled) {
+            cbIVlen = 8;//IV+ExtIV
+            cbMIClen = 8;
+            cbICVlen = 4;
+    	    pTxBufHead->wFragCtl |= FRAGCTL_TKIP;
+    	    //We need to get seed here for filling TxKey entry.
+            //TKIPvMixKey(pTransmitKey->abyKey, pDevice->abyCurrentNetAddr,
+            //            pTransmitKey->wTSC15_0, pTransmitKey->dwTSC47_16, pDevice->abyPRNG);
+        }
+        else if (pDevice->eEncryptionStatus == Ndis802_11Encryption3Enabled) {
+            cbIVlen = 8;//RSN Header
+            cbICVlen = 8;//MIC
+            pTxBufHead->wFragCtl |= FRAGCTL_AES;
+            pDevice->bAES = TRUE;
+        }
+        //MAC Header should be padding 0 to DW alignment.
+        uPadding = 4 - (cbMacHdLen%4);
+        uPadding %= 4;
+    }
+
+    cbFrameSize = cbMacHdLen + cbFrameBodySize + cbIVlen + cbMIClen + cbICVlen + cbFCSlen;
+
+    //Set FIFOCTL_GrpAckPolicy
+    if (pDevice->bGrpAckPolicy == TRUE) {//0000 0100 0000 0000
+        pTxBufHead->wFIFOCtl |=	FIFOCTL_GRPACK;
+    }
+    //the rest of pTxBufHead->wFragCtl:FragTyp will be set later in s_vFillFragParameter()
+
+    //Set RrvTime/RTS/CTS Buffer
+    if (byPktTyp == PK_TYPE_11GB || byPktTyp == PK_TYPE_11GA) {//802.11g packet
+
+        pvRrvTime = (PSRrvTime_gCTS) (pbyTxBufferAddr + wTxBufSize);
+        pMICHDR = NULL;
+        pvRTS = NULL;
+        pCTS = (PSCTS) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_gCTS));
+        pvTxDataHd = (PSTxDataHead_g) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_gCTS) + sizeof(SCTS));
+        cbHeaderSize = wTxBufSize + sizeof(SRrvTime_gCTS) + sizeof(SCTS) + sizeof(STxDataHead_g);
+    }
+    else { // 802.11a/b packet
+        pvRrvTime = (PSRrvTime_ab) (pbyTxBufferAddr + wTxBufSize);
+        pMICHDR = NULL;
+        pvRTS = NULL;
+        pCTS = NULL;
+        pvTxDataHd = (PSTxDataHead_ab) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_ab));
+        cbHeaderSize = wTxBufSize + sizeof(SRrvTime_ab) + sizeof(STxDataHead_ab);
+    }
+
+    ZERO_MEMORY((PVOID)(pbyTxBufferAddr + wTxBufSize), (cbHeaderSize - wTxBufSize));
+
+    MEMvCopy(&(sEthHeader.abyDstAddr[0]), &(pPacket->p80211Header->sA3.abyAddr1[0]), U_ETHER_ADDR_LEN);
+    MEMvCopy(&(sEthHeader.abySrcAddr[0]), &(pPacket->p80211Header->sA3.abyAddr2[0]), U_ETHER_ADDR_LEN);
+    //=========================
+    //    No Fragmentation
+    //=========================
+    pTxBufHead->wFragCtl |= (WORD)FRAGCTL_NONFRAG;
+
+
+    //Fill FIFO,RrvTime,RTS,and CTS
+    s_vGenerateTxParameter(pDevice, byPktTyp, pbyTxBufferAddr, pvRrvTime, pvRTS, pCTS,
+                           cbFrameSize, bNeedACK, TYPE_TXDMA0, &sEthHeader, wCurrentRate);
+
+    //Fill DataHead
+    uDuration = s_uFillDataHead(pDevice, byPktTyp, pvTxDataHd, cbFrameSize, TYPE_TXDMA0, bNeedACK,
+                                0, 0, 1, AUTO_FB_NONE, wCurrentRate);
+
+    pMACHeader = (PS802_11Header) (pbyTxBufferAddr + cbHeaderSize);
+
+    cbReqCount = cbHeaderSize + cbMacHdLen + uPadding + cbIVlen + cbFrameBodySize;
+
+    if (WLAN_GET_FC_ISWEP(pPacket->p80211Header->sA4.wFrameCtl) != 0) {
+        PBYTE           pbyIVHead;
+        PBYTE           pbyPayloadHead;
+        PBYTE           pbyBSSID;
+        PSKeyItem       pTransmitKey = NULL;
+
+        pbyIVHead = (PBYTE)(pbyTxBufferAddr + cbHeaderSize + cbMacHdLen + uPadding);
+        pbyPayloadHead = (PBYTE)(pbyTxBufferAddr + cbHeaderSize + cbMacHdLen + uPadding + cbIVlen);
+
+        //Fill TXKEY
+        //Kyle: Need fix: TKIP and AES did't encryt Mnt Packet.
+        //s_vFillTxKey(pDevice, (PBYTE)pTxBufHead->adwTxKey, NULL);
+
+        //Fill IV(ExtIV,RSNHDR)
+        //s_vFillPrePayload(pDevice, pbyIVHead, NULL);
+        //---------------------------
+        // S/W or H/W Encryption
+        //---------------------------
+        //Fill MICHDR
+        //if (pDevice->bAES) {
+        //    s_vFillMICHDR(pDevice, (PBYTE)pMICHDR, (PBYTE)pMACHeader, (WORD)cbFrameBodySize);
+        //}
+        do {
+            if ((pDevice->eOPMode == OP_MODE_INFRASTRUCTURE) &&
+                (pDevice->bLinkPass == TRUE)) {
+                pbyBSSID = pDevice->abyBSSID;
+                // get pairwise key
+                if (KeybGetTransmitKey(&(pDevice->sKey), pbyBSSID, PAIRWISE_KEY, &pTransmitKey) == FALSE) {
+                    // get group key
+                    if(KeybGetTransmitKey(&(pDevice->sKey), pbyBSSID, GROUP_KEY, &pTransmitKey) == TRUE) {
+                        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Get GTK.\n");
+                        break;
+                    }
+                } else {
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Get PTK.\n");
+                    break;
+                }
+            }
+            // get group key
+            pbyBSSID = pDevice->abyBroadcastAddr;
+            if(KeybGetTransmitKey(&(pDevice->sKey), pbyBSSID, GROUP_KEY, &pTransmitKey) == FALSE) {
+                pTransmitKey = NULL;
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"KEY is NULL. OP Mode[%d]\n", pDevice->eOPMode);
+            } else {
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Get GTK.\n");
+            }
+        } while(FALSE);
+        //Fill TXKEY
+        s_vFillTxKey(pDevice, (PBYTE)(pTxBufHead->adwTxKey), pbyIVHead, pTransmitKey,
+                     (PBYTE)pMACHeader, (WORD)cbFrameBodySize, NULL);
+
+        MEMvCopy(pMACHeader, pPacket->p80211Header, cbMacHdLen);
+        MEMvCopy(pbyPayloadHead, ((PBYTE)(pPacket->p80211Header) + cbMacHdLen),
+                 cbFrameBodySize);
+    }
+    else {
+        // Copy the Packet into a tx Buffer
+        MEMvCopy(pMACHeader, pPacket->p80211Header, pPacket->cbMPDULen);
+    }
+
+    pMACHeader->wSeqCtl = cpu_to_le16(pDevice->wSeqCounter << 4);
+    pDevice->wSeqCounter++ ;
+    if (pDevice->wSeqCounter > 0x0fff)
+        pDevice->wSeqCounter = 0;
+
+    if (bIsPSPOLL) {
+        // The MAC will automatically replace the Duration-field of MAC header by Duration-field
+        // of  FIFO control header.
+        // This will cause AID-field of PS-POLL packet be incorrect (Because PS-POLL's AID field is
+        // in the same place of other packet's Duration-field).
+        // And it will cause Cisco-AP to issue Disassociation-packet
+        if (byPktTyp == PK_TYPE_11GB || byPktTyp == PK_TYPE_11GA) {
+            ((PSTxDataHead_g)pvTxDataHd)->wDuration_a = cpu_to_le16(pPacket->p80211Header->sA2.wDurationID);
+            ((PSTxDataHead_g)pvTxDataHd)->wDuration_b = cpu_to_le16(pPacket->p80211Header->sA2.wDurationID);
+        } else {
+            ((PSTxDataHead_ab)pvTxDataHd)->wDuration = cpu_to_le16(pPacket->p80211Header->sA2.wDurationID);
+        }
+    }
+
+
+    // first TD is the only TD
+    //Set TSR1 & ReqCount in TxDescHead
+    pFrstTD->m_td1TD1.byTCR = (TCR_STP | TCR_EDP | EDMSDU);
+    pFrstTD->pTDInfo->skb_dma = pFrstTD->pTDInfo->buf_dma;
+    pFrstTD->m_td1TD1.wReqCount = cpu_to_le16((WORD)(cbReqCount));
+    pFrstTD->buff_addr = cpu_to_le32(pFrstTD->pTDInfo->skb_dma);
+    pFrstTD->pTDInfo->byFlags = 0;
+
+    if (MACbIsRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_PS)) {
+        // Disable PS
+        MACbPSWakeup(pDevice->PortOffset);
+    }
+    pDevice->bPWBitOn = FALSE;
+
+    wmb();
+    pFrstTD->m_td0TD0.f1Owner = OWNED_BY_NIC;
+    wmb();
+
+    pDevice->iTDUsed[TYPE_TXDMA0]++;
+
+    if (AVAIL_TD(pDevice, TYPE_TXDMA0) <= 1) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " available td0 <= 1\n");
+    }
+
+    pDevice->apCurrTD[TYPE_TXDMA0] = pFrstTD->next;
+#ifdef	PLICE_DEBUG
+		//printk("SCAN:CurrentRate is  %d,TxPower is %d\n",wCurrentRate,pTxBufHead->byTxPower);
+#endif
+
+#ifdef TxInSleep
+  pDevice->nTxDataTimeCout=0; //2008-8-21 chester <add> for send null packet
+  #endif
+
+    // Poll Transmit the adapter
+    MACvTransmit0(pDevice->PortOffset);
+
+    return CMD_STATUS_PENDING;
+
+}
+
+
+CMD_STATUS csBeacon_xmit(PSDevice pDevice, PSTxMgmtPacket pPacket) {
+
+    BYTE             byPktTyp;
+    PBYTE            pbyBuffer = (PBYTE)pDevice->tx_beacon_bufs;
+    UINT             cbFrameSize = pPacket->cbMPDULen + WLAN_FCS_LEN;
+    UINT             cbHeaderSize = 0;
+    WORD             wTxBufSize = sizeof(STxShortBufHead);
+    PSTxShortBufHead pTxBufHead = (PSTxShortBufHead) pbyBuffer;
+    PSTxDataHead_ab  pTxDataHead = (PSTxDataHead_ab) (pbyBuffer + wTxBufSize);
+    PS802_11Header   pMACHeader;
+    WORD             wCurrentRate;
+    WORD             wLen = 0x0000;
+
+
+    memset(pTxBufHead, 0, wTxBufSize);
+
+    if (pDevice->eCurrentPHYType == PHY_TYPE_11A) {
+        wCurrentRate = RATE_6M;
+        byPktTyp = PK_TYPE_11A;
+    } else {
+        wCurrentRate = RATE_2M;
+        byPktTyp = PK_TYPE_11B;
+    }
+
+    //Set Preamble type always long
+    pDevice->byPreambleType = PREAMBLE_LONG;
+
+    //Set FIFOCTL_GENINT
+
+    pTxBufHead->wFIFOCtl |= FIFOCTL_GENINT;
+
+
+    //Set packet type & Get Duration
+    if (byPktTyp == PK_TYPE_11A) {//0000 0000 0000 0000
+        pTxDataHead->wDuration = cpu_to_le16((WORD)s_uGetDataDuration(pDevice, DATADUR_A, cbFrameSize, byPktTyp,
+                                                          wCurrentRate, FALSE, 0, 0, 1, AUTO_FB_NONE));
+    }
+    else if (byPktTyp == PK_TYPE_11B) {//0000 0001 0000 0000
+        pTxBufHead->wFIFOCtl |= FIFOCTL_11B;
+        pTxDataHead->wDuration = cpu_to_le16((WORD)s_uGetDataDuration(pDevice, DATADUR_B, cbFrameSize, byPktTyp,
+                                                          wCurrentRate, FALSE, 0, 0, 1, AUTO_FB_NONE));
+    }
+
+    BBvCaculateParameter(pDevice, cbFrameSize, wCurrentRate, byPktTyp,
+        (PWORD)&(wLen), (PBYTE)&(pTxDataHead->byServiceField), (PBYTE)&(pTxDataHead->bySignalField)
+    );
+    pTxDataHead->wTransmitLength = cpu_to_le16(wLen);
+    //Get TimeStampOff
+    pTxDataHead->wTimeStampOff = cpu_to_le16(wTimeStampOff[pDevice->byPreambleType%2][wCurrentRate%MAX_RATE]);
+    cbHeaderSize = wTxBufSize + sizeof(STxDataHead_ab);
+
+   //Generate Beacon Header
+    pMACHeader = (PS802_11Header)(pbyBuffer + cbHeaderSize);
+    MEMvCopy(pMACHeader, pPacket->p80211Header, pPacket->cbMPDULen);
+
+    pMACHeader->wDurationID = 0;
+    pMACHeader->wSeqCtl = cpu_to_le16(pDevice->wSeqCounter << 4);
+    pDevice->wSeqCounter++ ;
+    if (pDevice->wSeqCounter > 0x0fff)
+        pDevice->wSeqCounter = 0;
+
+    // Set Beacon buffer length
+    pDevice->wBCNBufLen = pPacket->cbMPDULen + cbHeaderSize;
+
+    MACvSetCurrBCNTxDescAddr(pDevice->PortOffset, (pDevice->tx_beacon_dma));
+
+    MACvSetCurrBCNLength(pDevice->PortOffset, pDevice->wBCNBufLen);
+    // Set auto Transmit on
+    MACvRegBitsOn(pDevice->PortOffset, MAC_REG_TCR, TCR_AUTOBCNTX);
+    // Poll Transmit the adapter
+    MACvTransmitBCN(pDevice->PortOffset);
+
+    return CMD_STATUS_PENDING;
+}
+
+
+
+UINT
+cbGetFragCount (
+    IN  PSDevice         pDevice,
+    IN  PSKeyItem        pTransmitKey,
+    IN  UINT             cbFrameBodySize,
+    IN  PSEthernetHeader psEthHeader
+    )
+{
+    UINT           cbMACHdLen;
+    UINT           cbFrameSize;
+    UINT           cbFragmentSize; //Hdr+(IV)+payoad+(MIC)+(ICV)+FCS
+    UINT           cbFragPayloadSize;
+    UINT           cbLastFragPayloadSize;
+    UINT           cbIVlen = 0;
+    UINT           cbICVlen = 0;
+    UINT           cbMIClen = 0;
+    UINT           cbFCSlen = 4;
+    UINT           uMACfragNum = 1;
+    BOOL           bNeedACK;
+
+
+
+    if ((pDevice->eOPMode == OP_MODE_ADHOC) ||
+        (pDevice->eOPMode == OP_MODE_AP)) {
+        if (IS_MULTICAST_ADDRESS(&(psEthHeader->abyDstAddr[0])) ||
+            IS_BROADCAST_ADDRESS(&(psEthHeader->abyDstAddr[0]))) {
+            bNeedACK = FALSE;
+        }
+        else {
+            bNeedACK = TRUE;
+        }
+    }
+    else {
+        // MSDUs in Infra mode always need ACK
+        bNeedACK = TRUE;
+    }
+
+    if (pDevice->bLongHeader)
+        cbMACHdLen = WLAN_HDR_ADDR3_LEN + 6;
+    else
+        cbMACHdLen = WLAN_HDR_ADDR3_LEN;
+
+
+    if (pDevice->bEncryptionEnable == TRUE) {
+
+        if (pTransmitKey == NULL) {
+            if ((pDevice->eEncryptionStatus == Ndis802_11Encryption1Enabled) ||
+                (pDevice->pMgmt->eAuthenMode < WMAC_AUTH_WPA)) {
+                cbIVlen = 4;
+                cbICVlen = 4;
+            } else if (pDevice->eEncryptionStatus == Ndis802_11Encryption2Enabled) {
+                cbIVlen = 8;//IV+ExtIV
+                cbMIClen = 8;
+                cbICVlen = 4;
+            } else if (pDevice->eEncryptionStatus == Ndis802_11Encryption3Enabled) {
+                cbIVlen = 8;//RSN Header
+                cbICVlen = 8;//MIC
+            }
+        } else if (pTransmitKey->byCipherSuite == KEY_CTL_WEP) {
+            cbIVlen = 4;
+            cbICVlen = 4;
+        } else if (pTransmitKey->byCipherSuite == KEY_CTL_TKIP) {
+            cbIVlen = 8;//IV+ExtIV
+            cbMIClen = 8;
+            cbICVlen = 4;
+        } else if (pTransmitKey->byCipherSuite == KEY_CTL_CCMP) {
+            cbIVlen = 8;//RSN Header
+            cbICVlen = 8;//MIC
+        }
+    }
+
+    cbFrameSize = cbMACHdLen + cbIVlen + (cbFrameBodySize + cbMIClen) + cbICVlen + cbFCSlen;
+
+    if ((cbFrameSize > pDevice->wFragmentationThreshold) && (bNeedACK == TRUE)) {
+        // Fragmentation
+        cbFragmentSize = pDevice->wFragmentationThreshold;
+        cbFragPayloadSize = cbFragmentSize - cbMACHdLen - cbIVlen - cbICVlen - cbFCSlen;
+        uMACfragNum = (WORD) ((cbFrameBodySize + cbMIClen) / cbFragPayloadSize);
+        cbLastFragPayloadSize = (cbFrameBodySize + cbMIClen) % cbFragPayloadSize;
+        if (cbLastFragPayloadSize == 0) {
+            cbLastFragPayloadSize = cbFragPayloadSize;
+        } else {
+            uMACfragNum++;
+        }
+    }
+    return uMACfragNum;
+}
+
+
+VOID
+vDMA0_tx_80211(PSDevice  pDevice, struct sk_buff *skb, PBYTE pbMPDU, UINT cbMPDULen) {
+
+    PSTxDesc        pFrstTD;
+    BYTE            byPktTyp;
+    PBYTE           pbyTxBufferAddr;
+    PVOID           pvRTS;
+    PVOID           pvCTS;
+    PVOID           pvTxDataHd;
+    UINT            uDuration;
+    UINT            cbReqCount;
+    PS802_11Header  pMACHeader;
+    UINT            cbHeaderSize;
+    UINT            cbFrameBodySize;
+    BOOL            bNeedACK;
+    BOOL            bIsPSPOLL = FALSE;
+    PSTxBufHead     pTxBufHead;
+    UINT            cbFrameSize;
+    UINT            cbIVlen = 0;
+    UINT            cbICVlen = 0;
+    UINT            cbMIClen = 0;
+    UINT            cbFCSlen = 4;
+    UINT            uPadding = 0;
+    UINT            cbMICHDR = 0;
+    UINT            uLength = 0;
+    DWORD           dwMICKey0, dwMICKey1;
+    DWORD           dwMIC_Priority;
+    PDWORD          pdwMIC_L;
+    PDWORD          pdwMIC_R;
+    WORD            wTxBufSize;
+    UINT            cbMacHdLen;
+    SEthernetHeader sEthHeader;
+    PVOID           pvRrvTime;
+    PVOID           pMICHDR;
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+    WORD            wCurrentRate = RATE_1M;
+    PUWLAN_80211HDR  p80211Header;
+    UINT             uNodeIndex = 0;
+    BOOL            bNodeExist = FALSE;
+    SKeyItem        STempKey;
+    PSKeyItem       pTransmitKey = NULL;
+    PBYTE           pbyIVHead;
+    PBYTE           pbyPayloadHead;
+    PBYTE           pbyMacHdr;
+
+    UINT            cbExtSuppRate = 0;
+//    PWLAN_IE        pItem;
+
+
+    pvRrvTime = pMICHDR = pvRTS = pvCTS = pvTxDataHd = NULL;
+
+    if(cbMPDULen <= WLAN_HDR_ADDR3_LEN) {
+       cbFrameBodySize = 0;
+    }
+    else {
+       cbFrameBodySize = cbMPDULen - WLAN_HDR_ADDR3_LEN;
+    }
+    p80211Header = (PUWLAN_80211HDR)pbMPDU;
+
+
+    pFrstTD = pDevice->apCurrTD[TYPE_TXDMA0];
+    pbyTxBufferAddr = (PBYTE)pFrstTD->pTDInfo->buf;
+    pTxBufHead = (PSTxBufHead) pbyTxBufferAddr;
+    wTxBufSize = sizeof(STxBufHead);
+    memset(pTxBufHead, 0, wTxBufSize);
+
+    if (pDevice->eCurrentPHYType == PHY_TYPE_11A) {
+        wCurrentRate = RATE_6M;
+        byPktTyp = PK_TYPE_11A;
+    } else {
+        wCurrentRate = RATE_1M;
+        byPktTyp = PK_TYPE_11B;
+    }
+
+    // SetPower will cause error power TX state for OFDM Date packet in TX buffer.
+    // 2004.11.11 Kyle -- Using OFDM power to tx MngPkt will decrease the connection capability.
+    //                    And cmd timer will wait data pkt TX finish before scanning so it's OK
+    //                    to set power here.
+    if (pDevice->pMgmt->eScanState != WMAC_NO_SCANNING) {
+        RFbSetPower(pDevice, wCurrentRate, pDevice->byCurrentCh);
+    } else {
+        RFbSetPower(pDevice, wCurrentRate, pMgmt->uCurrChannel);
+    }
+    pTxBufHead->byTxPower = pDevice->byCurPwr;
+
+    //+++++++++++++++++++++ Patch VT3253 A1 performance +++++++++++++++++++++++++++
+    if (pDevice->byFOETuning) {
+        if ((p80211Header->sA3.wFrameCtl & TYPE_DATE_NULL) == TYPE_DATE_NULL) {
+            wCurrentRate = RATE_24M;
+            byPktTyp = PK_TYPE_11GA;
+        }
+    }
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"vDMA0_tx_80211: p80211Header->sA3.wFrameCtl = %x \n", p80211Header->sA3.wFrameCtl);
+
+    //Set packet type
+    if (byPktTyp == PK_TYPE_11A) {//0000 0000 0000 0000
+        pTxBufHead->wFIFOCtl = 0;
+    }
+    else if (byPktTyp == PK_TYPE_11B) {//0000 0001 0000 0000
+        pTxBufHead->wFIFOCtl |= FIFOCTL_11B;
+    }
+    else if (byPktTyp == PK_TYPE_11GB) {//0000 0010 0000 0000
+        pTxBufHead->wFIFOCtl |= FIFOCTL_11GB;
+    }
+    else if (byPktTyp == PK_TYPE_11GA) {//0000 0011 0000 0000
+        pTxBufHead->wFIFOCtl |= FIFOCTL_11GA;
+    }
+
+    pTxBufHead->wFIFOCtl |= FIFOCTL_TMOEN;
+    pTxBufHead->wTimeStamp = cpu_to_le16(DEFAULT_MGN_LIFETIME_RES_64us);
+
+
+    if (IS_MULTICAST_ADDRESS(&(p80211Header->sA3.abyAddr1[0])) ||
+        IS_BROADCAST_ADDRESS(&(p80211Header->sA3.abyAddr1[0]))) {
+        bNeedACK = FALSE;
+        if (pDevice->bEnableHostWEP) {
+            uNodeIndex = 0;
+            bNodeExist = TRUE;
+        };
+    }
+    else {
+        if (pDevice->bEnableHostWEP) {
+            if (BSSDBbIsSTAInNodeDB(pDevice->pMgmt, (PBYTE)(p80211Header->sA3.abyAddr1), &uNodeIndex))
+                bNodeExist = TRUE;
+        };
+        bNeedACK = TRUE;
+        pTxBufHead->wFIFOCtl |= FIFOCTL_NEEDACK;
+    };
+
+    if ((pMgmt->eCurrMode == WMAC_MODE_ESS_AP) ||
+        (pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) ) {
+
+        pTxBufHead->wFIFOCtl |= FIFOCTL_LRETRY;
+        //Set Preamble type always long
+        //pDevice->byPreambleType = PREAMBLE_LONG;
+
+        // probe-response don't retry
+        //if ((p80211Header->sA4.wFrameCtl & TYPE_SUBTYPE_MASK) == TYPE_MGMT_PROBE_RSP) {
+        //     bNeedACK = FALSE;
+        //     pTxBufHead->wFIFOCtl  &= (~FIFOCTL_NEEDACK);
+        //}
+    }
+
+    pTxBufHead->wFIFOCtl |= (FIFOCTL_GENINT | FIFOCTL_ISDMA0);
+
+    if ((p80211Header->sA4.wFrameCtl & TYPE_SUBTYPE_MASK) == TYPE_CTL_PSPOLL) {
+        bIsPSPOLL = TRUE;
+        cbMacHdLen = WLAN_HDR_ADDR2_LEN;
+    } else {
+        cbMacHdLen = WLAN_HDR_ADDR3_LEN;
+    }
+
+    // hostapd deamon ext support rate patch
+    if (WLAN_GET_FC_FSTYPE(p80211Header->sA4.wFrameCtl) == WLAN_FSTYPE_ASSOCRESP) {
+
+        if (((PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates)->len != 0) {
+            cbExtSuppRate += ((PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates)->len + WLAN_IEHDR_LEN;
+         }
+
+        if (((PWLAN_IE_SUPP_RATES)pMgmt->abyCurrExtSuppRates)->len != 0) {
+            cbExtSuppRate += ((PWLAN_IE_SUPP_RATES)pMgmt->abyCurrExtSuppRates)->len + WLAN_IEHDR_LEN;
+         }
+
+         if (cbExtSuppRate >0) {
+            cbFrameBodySize = WLAN_ASSOCRESP_OFF_SUPP_RATES;
+         }
+    }
+
+
+    //Set FRAGCTL_MACHDCNT
+    pTxBufHead->wFragCtl |= cpu_to_le16((WORD)cbMacHdLen << 10);
+
+    // Notes:
+    // Although spec says MMPDU can be fragmented; In most case,
+    // no one will send a MMPDU under fragmentation. With RTS may occur.
+    pDevice->bAES = FALSE;  //Set FRAGCTL_WEPTYP
+
+
+    if (WLAN_GET_FC_ISWEP(p80211Header->sA4.wFrameCtl) != 0) {
+        if (pDevice->eEncryptionStatus == Ndis802_11Encryption1Enabled) {
+            cbIVlen = 4;
+            cbICVlen = 4;
+    	    pTxBufHead->wFragCtl |= FRAGCTL_LEGACY;
+        }
+        else if (pDevice->eEncryptionStatus == Ndis802_11Encryption2Enabled) {
+            cbIVlen = 8;//IV+ExtIV
+            cbMIClen = 8;
+            cbICVlen = 4;
+    	    pTxBufHead->wFragCtl |= FRAGCTL_TKIP;
+    	    //We need to get seed here for filling TxKey entry.
+            //TKIPvMixKey(pTransmitKey->abyKey, pDevice->abyCurrentNetAddr,
+            //            pTransmitKey->wTSC15_0, pTransmitKey->dwTSC47_16, pDevice->abyPRNG);
+        }
+        else if (pDevice->eEncryptionStatus == Ndis802_11Encryption3Enabled) {
+            cbIVlen = 8;//RSN Header
+            cbICVlen = 8;//MIC
+            cbMICHDR = sizeof(SMICHDRHead);
+            pTxBufHead->wFragCtl |= FRAGCTL_AES;
+            pDevice->bAES = TRUE;
+        }
+        //MAC Header should be padding 0 to DW alignment.
+        uPadding = 4 - (cbMacHdLen%4);
+        uPadding %= 4;
+    }
+
+    cbFrameSize = cbMacHdLen + cbFrameBodySize + cbIVlen + cbMIClen + cbICVlen + cbFCSlen + cbExtSuppRate;
+
+    //Set FIFOCTL_GrpAckPolicy
+    if (pDevice->bGrpAckPolicy == TRUE) {//0000 0100 0000 0000
+        pTxBufHead->wFIFOCtl |=	FIFOCTL_GRPACK;
+    }
+    //the rest of pTxBufHead->wFragCtl:FragTyp will be set later in s_vFillFragParameter()
+
+
+    if (byPktTyp == PK_TYPE_11GB || byPktTyp == PK_TYPE_11GA) {//802.11g packet
+
+        pvRrvTime = (PSRrvTime_gCTS) (pbyTxBufferAddr + wTxBufSize);
+        pMICHDR = (PSMICHDRHead) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_gCTS));
+        pvRTS = NULL;
+        pvCTS = (PSCTS) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_gCTS) + cbMICHDR);
+        pvTxDataHd = (PSTxDataHead_g) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_gCTS) + cbMICHDR + sizeof(SCTS));
+        cbHeaderSize = wTxBufSize + sizeof(SRrvTime_gCTS) + cbMICHDR + sizeof(SCTS) + sizeof(STxDataHead_g);
+
+    }
+    else {//802.11a/b packet
+
+        pvRrvTime = (PSRrvTime_ab) (pbyTxBufferAddr + wTxBufSize);
+        pMICHDR = (PSMICHDRHead) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_ab));
+        pvRTS = NULL;
+        pvCTS = NULL;
+        pvTxDataHd = (PSTxDataHead_ab) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_ab) + cbMICHDR);
+        cbHeaderSize = wTxBufSize + sizeof(SRrvTime_ab) + cbMICHDR + sizeof(STxDataHead_ab);
+
+    }
+
+    ZERO_MEMORY((PVOID)(pbyTxBufferAddr + wTxBufSize), (cbHeaderSize - wTxBufSize));
+    MEMvCopy(&(sEthHeader.abyDstAddr[0]), &(p80211Header->sA3.abyAddr1[0]), U_ETHER_ADDR_LEN);
+    MEMvCopy(&(sEthHeader.abySrcAddr[0]), &(p80211Header->sA3.abyAddr2[0]), U_ETHER_ADDR_LEN);
+    //=========================
+    //    No Fragmentation
+    //=========================
+    pTxBufHead->wFragCtl |= (WORD)FRAGCTL_NONFRAG;
+
+
+    //Fill FIFO,RrvTime,RTS,and CTS
+    s_vGenerateTxParameter(pDevice, byPktTyp, pbyTxBufferAddr, pvRrvTime, pvRTS, pvCTS,
+                           cbFrameSize, bNeedACK, TYPE_TXDMA0, &sEthHeader, wCurrentRate);
+
+    //Fill DataHead
+    uDuration = s_uFillDataHead(pDevice, byPktTyp, pvTxDataHd, cbFrameSize, TYPE_TXDMA0, bNeedACK,
+                                0, 0, 1, AUTO_FB_NONE, wCurrentRate);
+
+    pMACHeader = (PS802_11Header) (pbyTxBufferAddr + cbHeaderSize);
+
+    cbReqCount = cbHeaderSize + cbMacHdLen + uPadding + cbIVlen + (cbFrameBodySize + cbMIClen) + cbExtSuppRate;
+
+    pbyMacHdr = (PBYTE)(pbyTxBufferAddr + cbHeaderSize);
+    pbyPayloadHead = (PBYTE)(pbyMacHdr + cbMacHdLen + uPadding + cbIVlen);
+    pbyIVHead = (PBYTE)(pbyMacHdr + cbMacHdLen + uPadding);
+
+    // Copy the Packet into a tx Buffer
+    memcpy(pbyMacHdr, pbMPDU, cbMacHdLen);
+
+    // version set to 0, patch for hostapd deamon
+    pMACHeader->wFrameCtl &= cpu_to_le16(0xfffc);
+    memcpy(pbyPayloadHead, (pbMPDU + cbMacHdLen), cbFrameBodySize);
+
+    // replace support rate, patch for hostapd deamon( only support 11M)
+    if (WLAN_GET_FC_FSTYPE(p80211Header->sA4.wFrameCtl) == WLAN_FSTYPE_ASSOCRESP) {
+        if (cbExtSuppRate != 0) {
+            if (((PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates)->len != 0)
+                memcpy((pbyPayloadHead + cbFrameBodySize),
+                        pMgmt->abyCurrSuppRates,
+                        ((PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates)->len + WLAN_IEHDR_LEN
+                       );
+             if (((PWLAN_IE_SUPP_RATES)pMgmt->abyCurrExtSuppRates)->len != 0)
+                memcpy((pbyPayloadHead + cbFrameBodySize) + ((PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates)->len + WLAN_IEHDR_LEN,
+                        pMgmt->abyCurrExtSuppRates,
+                        ((PWLAN_IE_SUPP_RATES)pMgmt->abyCurrExtSuppRates)->len + WLAN_IEHDR_LEN
+                       );
+         }
+    }
+
+    // Set wep
+    if (WLAN_GET_FC_ISWEP(p80211Header->sA4.wFrameCtl) != 0) {
+
+        if (pDevice->bEnableHostWEP) {
+            pTransmitKey = &STempKey;
+            pTransmitKey->byCipherSuite = pMgmt->sNodeDBTable[uNodeIndex].byCipherSuite;
+            pTransmitKey->dwKeyIndex = pMgmt->sNodeDBTable[uNodeIndex].dwKeyIndex;
+            pTransmitKey->uKeyLength = pMgmt->sNodeDBTable[uNodeIndex].uWepKeyLength;
+            pTransmitKey->dwTSC47_16 = pMgmt->sNodeDBTable[uNodeIndex].dwTSC47_16;
+            pTransmitKey->wTSC15_0 = pMgmt->sNodeDBTable[uNodeIndex].wTSC15_0;
+            memcpy(pTransmitKey->abyKey,
+                &pMgmt->sNodeDBTable[uNodeIndex].abyWepKey[0],
+                pTransmitKey->uKeyLength
+                );
+        }
+
+        if ((pTransmitKey != NULL) && (pTransmitKey->byCipherSuite == KEY_CTL_TKIP)) {
+
+            dwMICKey0 = *(PDWORD)(&pTransmitKey->abyKey[16]);
+            dwMICKey1 = *(PDWORD)(&pTransmitKey->abyKey[20]);
+
+            // DO Software Michael
+            MIC_vInit(dwMICKey0, dwMICKey1);
+            MIC_vAppend((PBYTE)&(sEthHeader.abyDstAddr[0]), 12);
+            dwMIC_Priority = 0;
+            MIC_vAppend((PBYTE)&dwMIC_Priority, 4);
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"DMA0_tx_8021:MIC KEY: %lX, %lX\n", dwMICKey0, dwMICKey1);
+
+            uLength = cbHeaderSize + cbMacHdLen + uPadding + cbIVlen;
+
+            MIC_vAppend((pbyTxBufferAddr + uLength), cbFrameBodySize);
+
+            pdwMIC_L = (PDWORD)(pbyTxBufferAddr + uLength + cbFrameBodySize);
+            pdwMIC_R = (PDWORD)(pbyTxBufferAddr + uLength + cbFrameBodySize + 4);
+
+            MIC_vGetMIC(pdwMIC_L, pdwMIC_R);
+            MIC_vUnInit();
+
+            if (pDevice->bTxMICFail == TRUE) {
+                *pdwMIC_L = 0;
+                *pdwMIC_R = 0;
+                pDevice->bTxMICFail = FALSE;
+            }
+
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"uLength: %d, %d\n", uLength, cbFrameBodySize);
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"cbReqCount:%d, %d, %d, %d\n", cbReqCount, cbHeaderSize, uPadding, cbIVlen);
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"MIC:%lx, %lx\n", *pdwMIC_L, *pdwMIC_R);
+
+        }
+
+
+        s_vFillTxKey(pDevice, (PBYTE)(pTxBufHead->adwTxKey), pbyIVHead, pTransmitKey,
+                     pbyMacHdr, (WORD)cbFrameBodySize, (PBYTE)pMICHDR);
+
+        if (pDevice->bEnableHostWEP) {
+            pMgmt->sNodeDBTable[uNodeIndex].dwTSC47_16 = pTransmitKey->dwTSC47_16;
+            pMgmt->sNodeDBTable[uNodeIndex].wTSC15_0 = pTransmitKey->wTSC15_0;
+        }
+
+        if ((pDevice->byLocalID <= REV_ID_VT3253_A1)) {
+            s_vSWencryption(pDevice, pTransmitKey, pbyPayloadHead, (WORD)(cbFrameBodySize + cbMIClen));
+        }
+    }
+
+    pMACHeader->wSeqCtl = cpu_to_le16(pDevice->wSeqCounter << 4);
+    pDevice->wSeqCounter++ ;
+    if (pDevice->wSeqCounter > 0x0fff)
+        pDevice->wSeqCounter = 0;
+
+
+    if (bIsPSPOLL) {
+        // The MAC will automatically replace the Duration-field of MAC header by Duration-field
+        // of  FIFO control header.
+        // This will cause AID-field of PS-POLL packet be incorrect (Because PS-POLL's AID field is
+        // in the same place of other packet's Duration-field).
+        // And it will cause Cisco-AP to issue Disassociation-packet
+        if (byPktTyp == PK_TYPE_11GB || byPktTyp == PK_TYPE_11GA) {
+            ((PSTxDataHead_g)pvTxDataHd)->wDuration_a = cpu_to_le16(p80211Header->sA2.wDurationID);
+            ((PSTxDataHead_g)pvTxDataHd)->wDuration_b = cpu_to_le16(p80211Header->sA2.wDurationID);
+        } else {
+            ((PSTxDataHead_ab)pvTxDataHd)->wDuration = cpu_to_le16(p80211Header->sA2.wDurationID);
+        }
+    }
+
+
+    // first TD is the only TD
+    //Set TSR1 & ReqCount in TxDescHead
+    pFrstTD->pTDInfo->skb = skb;
+    pFrstTD->m_td1TD1.byTCR = (TCR_STP | TCR_EDP | EDMSDU);
+    pFrstTD->pTDInfo->skb_dma = pFrstTD->pTDInfo->buf_dma;
+    pFrstTD->m_td1TD1.wReqCount = cpu_to_le16(cbReqCount);
+    pFrstTD->buff_addr = cpu_to_le32(pFrstTD->pTDInfo->skb_dma);
+    pFrstTD->pTDInfo->byFlags = 0;
+    pFrstTD->pTDInfo->byFlags |= TD_FLAGS_PRIV_SKB;
+
+    if (MACbIsRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_PS)) {
+        // Disable PS
+        MACbPSWakeup(pDevice->PortOffset);
+    }
+    pDevice->bPWBitOn = FALSE;
+
+    wmb();
+    pFrstTD->m_td0TD0.f1Owner = OWNED_BY_NIC;
+    wmb();
+
+    pDevice->iTDUsed[TYPE_TXDMA0]++;
+
+    if (AVAIL_TD(pDevice, TYPE_TXDMA0) <= 1) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " available td0 <= 1\n");
+    }
+
+    pDevice->apCurrTD[TYPE_TXDMA0] = pFrstTD->next;
+
+    // Poll Transmit the adapter
+    MACvTransmit0(pDevice->PortOffset);
+
+    return;
+}
+
+
diff --git a/drivers/staging/vt6655/rxtx.h b/drivers/staging/vt6655/rxtx.h
new file mode 100644
index 00000000000..3e85264e284
--- /dev/null
+++ b/drivers/staging/vt6655/rxtx.h
@@ -0,0 +1,132 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: whdr.h
+ *
+ * Purpose:
+ *
+ * Author: Jerry Chen
+ *
+ * Date: Jun. 27, 2002
+ *
+ */
+
+
+#ifndef __RXTX_H__
+#define __RXTX_H__
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+#if !defined(__DEVICE_H__)
+#include "device.h"
+#endif
+#if !defined(__WCMD_H__)
+#include "wcmd.h"
+#endif
+
+
+/*---------------------  Export Definitions -------------------------*/
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+
+
+#ifdef __cplusplus
+extern "C" {                            /* Assume C declarations for C++ */
+#endif /* __cplusplus */
+
+/*
+VOID vGenerateMACHeader(
+    IN PSDevice pDevice,
+    IN DWORD dwTxBufferAddr,
+    IN PBYTE pbySkbData,
+    IN UINT cbPacketSize,
+    IN BOOL bDMA0Used,
+    OUT PUINT pcbHeadSize,
+    OUT PUINT pcbAppendPayload
+     );
+
+VOID vProcessRxMACHeader (
+    IN  PSDevice pDevice,
+    IN  DWORD dwRxBufferAddr,
+    IN  UINT cbPacketSize,
+    IN  BOOL bIsWEP,
+    OUT PUINT pcbHeadSize
+    );
+*/
+
+
+VOID
+vGenerateMACHeader (
+    IN PSDevice         pDevice,
+    IN PBYTE            pbyBufferAddr,
+    IN WORD             wDuration,
+    IN PSEthernetHeader psEthHeader,
+    IN BOOL             bNeedEncrypt,
+    IN WORD             wFragType,
+    IN UINT             uDMAIdx,
+    IN UINT             uFragIdx
+    );
+
+
+UINT
+cbGetFragCount(
+    IN  PSDevice         pDevice,
+    IN  PSKeyItem        pTransmitKey,
+    IN  UINT             cbFrameBodySize,
+    IN  PSEthernetHeader psEthHeader
+    );
+
+
+VOID
+vGenerateFIFOHeader (
+    IN  PSDevice         pDevice,
+    IN  BYTE             byPktTyp,
+    IN  PBYTE            pbyTxBufferAddr,
+    IN  BOOL             bNeedEncrypt,
+    IN  UINT             cbPayloadSize,
+    IN  UINT             uDMAIdx,
+    IN  PSTxDesc         pHeadTD,
+    IN  PSEthernetHeader psEthHeader,
+    IN  PBYTE            pPacket,
+    IN  PSKeyItem        pTransmitKey,
+    IN  UINT             uNodeIndex,
+    OUT PUINT            puMACfragNum,
+    OUT PUINT            pcbHeaderSize
+    );
+
+
+VOID vDMA0_tx_80211(PSDevice  pDevice, struct sk_buff *skb, PBYTE pbMPDU, UINT cbMPDULen);
+CMD_STATUS csMgmt_xmit(PSDevice pDevice, PSTxMgmtPacket pPacket);
+CMD_STATUS csBeacon_xmit(PSDevice pDevice, PSTxMgmtPacket pPacket);
+
+#ifdef __cplusplus
+}                                       /* End of extern "C" { */
+#endif /* __cplusplus */
+
+
+
+
+#endif // __RXTX_H__
+
+
+
diff --git a/drivers/staging/vt6655/srom.c b/drivers/staging/vt6655/srom.c
new file mode 100644
index 00000000000..655d6859370
--- /dev/null
+++ b/drivers/staging/vt6655/srom.c
@@ -0,0 +1,437 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: srom.c
+ *
+ * Purpose:Implement functions to access eeprom
+ *
+ * Author: Jerry Chen
+ *
+ * Date: Jan 29, 2003
+ *
+ * Functions:
+ *      SROMbyReadEmbedded - Embedded read eeprom via MAC
+ *      SROMbWriteEmbedded - Embedded write eeprom via MAC
+ *      SROMvRegBitsOn - Set Bits On in eeprom
+ *      SROMvRegBitsOff - Clear Bits Off in eeprom
+ *      SROMbIsRegBitsOn - Test if Bits On in eeprom
+ *      SROMbIsRegBitsOff - Test if Bits Off in eeprom
+ *      SROMvReadAllContents - Read all contents in eeprom
+ *      SROMvWriteAllContents - Write all contents in eeprom
+ *      SROMvReadEtherAddress - Read Ethernet Address in eeprom
+ *      SROMvWriteEtherAddress - Write Ethernet Address in eeprom
+ *      SROMvReadSubSysVenId - Read Sub_VID and Sub_SysId in eeprom
+ *      SROMbAutoLoad - Auto Load eeprom to MAC register
+ *
+ * Revision History:
+ *
+ */
+
+
+#if !defined(__UPC_H__)
+#include "upc.h"
+#endif
+#if !defined(__TMACRO_H__)
+#include "tmacro.h"
+#endif
+#if !defined(__TBIT_H__)
+#include "tbit.h"
+#endif
+#if !defined(__TETHER_H__)
+#include "tether.h"
+#endif
+#if !defined(__MAC_H__)
+#include "mac.h"
+#endif
+#if !defined(__SROM_H__)
+#include "srom.h"
+#endif
+
+
+
+
+/*---------------------  Static Definitions -------------------------*/
+
+/*---------------------  Static Classes  ----------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+
+/*---------------------  Static Functions  --------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+
+
+
+
+/*
+ * Description: Read a byte from EEPROM, by MAC I2C
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase        - I/O base address
+ *      byContntOffset  - address of EEPROM
+ *  Out:
+ *      none
+ *
+ * Return Value: data read
+ *
+ */
+BYTE SROMbyReadEmbedded(DWORD_PTR dwIoBase, BYTE byContntOffset)
+{
+    WORD    wDelay, wNoACK;
+    BYTE    byWait;
+    BYTE    byData;
+    BYTE    byOrg;
+
+    byData = 0xFF;
+    VNSvInPortB(dwIoBase + MAC_REG_I2MCFG, &byOrg);
+    // turn off hardware retry for getting NACK
+    VNSvOutPortB(dwIoBase + MAC_REG_I2MCFG, (byOrg & (~I2MCFG_NORETRY)));
+    for (wNoACK = 0; wNoACK < W_MAX_I2CRETRY; wNoACK++) {
+        VNSvOutPortB(dwIoBase + MAC_REG_I2MTGID, EEP_I2C_DEV_ID);
+        VNSvOutPortB(dwIoBase + MAC_REG_I2MTGAD, byContntOffset);
+
+        // issue read command
+        VNSvOutPortB(dwIoBase + MAC_REG_I2MCSR, I2MCSR_EEMR);
+        // wait DONE be set
+        for (wDelay = 0; wDelay < W_MAX_TIMEOUT; wDelay++) {
+            VNSvInPortB(dwIoBase + MAC_REG_I2MCSR, &byWait);
+            if (BITbIsAnyBitsOn(byWait, (I2MCSR_DONE | I2MCSR_NACK)))
+                break;
+            PCAvDelayByIO(CB_DELAY_LOOP_WAIT);
+        }
+        if ((wDelay < W_MAX_TIMEOUT) &&
+             (BITbIsBitOff(byWait, I2MCSR_NACK))) {
+            break;
+        }
+    }
+    VNSvInPortB(dwIoBase + MAC_REG_I2MDIPT, &byData);
+    VNSvOutPortB(dwIoBase + MAC_REG_I2MCFG, byOrg);
+    return byData;
+}
+
+
+/*
+ * Description: Write a byte to EEPROM, by MAC I2C
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase        - I/O base address
+ *      byContntOffset  - address of EEPROM
+ *      wData           - data to write
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if succeeded; FALSE if failed.
+ *
+ */
+BOOL SROMbWriteEmbedded (DWORD_PTR dwIoBase, BYTE byContntOffset, BYTE byData)
+{
+    WORD    wDelay, wNoACK;
+    BYTE    byWait;
+
+    BYTE    byOrg;
+
+    VNSvInPortB(dwIoBase + MAC_REG_I2MCFG, &byOrg);
+    // turn off hardware retry for getting NACK
+    VNSvOutPortB(dwIoBase + MAC_REG_I2MCFG, (byOrg & (~I2MCFG_NORETRY)));
+    for (wNoACK = 0; wNoACK < W_MAX_I2CRETRY; wNoACK++) {
+        VNSvOutPortB(dwIoBase + MAC_REG_I2MTGID, EEP_I2C_DEV_ID);
+        VNSvOutPortB(dwIoBase + MAC_REG_I2MTGAD, byContntOffset);
+        VNSvOutPortB(dwIoBase + MAC_REG_I2MDOPT, byData);
+
+        // issue write command
+        VNSvOutPortB(dwIoBase + MAC_REG_I2MCSR, I2MCSR_EEMW);
+        // wait DONE be set
+        for (wDelay = 0; wDelay < W_MAX_TIMEOUT; wDelay++) {
+            VNSvInPortB(dwIoBase + MAC_REG_I2MCSR, &byWait);
+            if (BITbIsAnyBitsOn(byWait, (I2MCSR_DONE | I2MCSR_NACK)))
+                break;
+            PCAvDelayByIO(CB_DELAY_LOOP_WAIT);
+        }
+
+        if ((wDelay < W_MAX_TIMEOUT) &&
+             (BITbIsBitOff(byWait, I2MCSR_NACK))) {
+            break;
+        }
+    }
+    if (wNoACK == W_MAX_I2CRETRY) {
+        VNSvOutPortB(dwIoBase + MAC_REG_I2MCFG, byOrg);
+        return FALSE;
+    }
+    VNSvOutPortB(dwIoBase + MAC_REG_I2MCFG, byOrg);
+    return TRUE;
+}
+
+
+/*
+ * Description: Turn bits on in eeprom
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase        - I/O base address
+ *      byContntOffset  - address of EEPROM
+ *      byBits          - bits to turn on
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void SROMvRegBitsOn (DWORD_PTR dwIoBase, BYTE byContntOffset, BYTE byBits)
+{
+    BYTE    byOrgData;
+
+    byOrgData = SROMbyReadEmbedded(dwIoBase, byContntOffset);
+    SROMbWriteEmbedded(dwIoBase, byContntOffset,(BYTE)(byOrgData | byBits));
+}
+
+
+/*
+ * Description: Turn bits off in eeprom
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase        - I/O base address
+ *      byContntOffset  - address of EEPROM
+ *      byBits          - bits to turn off
+ *  Out:
+ *      none
+ *
+ */
+void SROMvRegBitsOff (DWORD_PTR dwIoBase, BYTE byContntOffset, BYTE byBits)
+{
+    BYTE    byOrgData;
+
+    byOrgData = SROMbyReadEmbedded(dwIoBase, byContntOffset);
+    SROMbWriteEmbedded(dwIoBase, byContntOffset,(BYTE)(byOrgData & (~byBits)));
+}
+
+
+/*
+ * Description: Test if bits on in eeprom
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase        - I/O base address
+ *      byContntOffset  - address of EEPROM
+ *      byTestBits      - bits to test
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if all test bits on; otherwise FALSE
+ *
+ */
+BOOL SROMbIsRegBitsOn (DWORD_PTR dwIoBase, BYTE byContntOffset, BYTE byTestBits)
+{
+    BYTE    byOrgData;
+
+    byOrgData = SROMbyReadEmbedded(dwIoBase, byContntOffset);
+    return BITbIsAllBitsOn(byOrgData, byTestBits);
+}
+
+
+/*
+ * Description: Test if bits off in eeprom
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase        - I/O base address
+ *      byContntOffset  - address of EEPROM
+ *      byTestBits      - bits to test
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if all test bits off; otherwise FALSE
+ *
+ */
+BOOL SROMbIsRegBitsOff (DWORD_PTR dwIoBase, BYTE byContntOffset, BYTE byTestBits)
+{
+    BYTE    byOrgData;
+
+    byOrgData = SROMbyReadEmbedded(dwIoBase, byContntOffset);
+    return BITbIsAllBitsOff(byOrgData, byTestBits);
+}
+
+
+/*
+ * Description: Read all contents of eeprom to buffer
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase        - I/O base address
+ *  Out:
+ *      pbyEepromRegs   - EEPROM content Buffer
+ *
+ * Return Value: none
+ *
+ */
+void SROMvReadAllContents (DWORD_PTR dwIoBase, PBYTE pbyEepromRegs)
+{
+    int     ii;
+
+    // ii = Rom Address
+    for (ii = 0; ii < EEP_MAX_CONTEXT_SIZE; ii++) {
+        *pbyEepromRegs = SROMbyReadEmbedded(dwIoBase,(BYTE) ii);
+        pbyEepromRegs++;
+    }
+}
+
+
+/*
+ * Description: Write all contents of buffer to eeprom
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase        - I/O base address
+ *      pbyEepromRegs   - EEPROM content Buffer
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void SROMvWriteAllContents (DWORD_PTR dwIoBase, PBYTE pbyEepromRegs)
+{
+    int     ii;
+
+    // ii = Rom Address
+    for (ii = 0; ii < EEP_MAX_CONTEXT_SIZE; ii++) {
+        SROMbWriteEmbedded(dwIoBase,(BYTE) ii, *pbyEepromRegs);
+        pbyEepromRegs++;
+    }
+}
+
+
+/*
+ * Description: Read Ethernet Address from eeprom to buffer
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase        - I/O base address
+ *  Out:
+ *      pbyEtherAddress - Ethernet Address buffer
+ *
+ * Return Value: none
+ *
+ */
+void SROMvReadEtherAddress (DWORD_PTR dwIoBase, PBYTE pbyEtherAddress)
+{
+    BYTE     ii;
+
+    // ii = Rom Address
+    for (ii = 0; ii < U_ETHER_ADDR_LEN; ii++) {
+        *pbyEtherAddress = SROMbyReadEmbedded(dwIoBase, ii);
+        pbyEtherAddress++;
+    }
+}
+
+
+/*
+ * Description: Write Ethernet Address from buffer to eeprom
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase        - I/O base address
+ *      pbyEtherAddress - Ethernet Address buffer
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+void SROMvWriteEtherAddress (DWORD_PTR dwIoBase, PBYTE pbyEtherAddress)
+{
+    BYTE     ii;
+
+    // ii = Rom Address
+    for (ii = 0; ii < U_ETHER_ADDR_LEN; ii++) {
+        SROMbWriteEmbedded(dwIoBase, ii, *pbyEtherAddress);
+        pbyEtherAddress++;
+    }
+}
+
+
+/*
+ * Description: Read Sub_VID and Sub_SysId from eeprom to buffer
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase        - I/O base address
+ *  Out:
+ *      pdwSubSysVenId  - Sub_VID and Sub_SysId read
+ *
+ * Return Value: none
+ *
+ */
+void SROMvReadSubSysVenId (DWORD_PTR dwIoBase, PDWORD pdwSubSysVenId)
+{
+    PBYTE   pbyData;
+
+    pbyData = (PBYTE)pdwSubSysVenId;
+    // sub vendor
+    *pbyData = SROMbyReadEmbedded(dwIoBase, 6);
+    *(pbyData+1) = SROMbyReadEmbedded(dwIoBase, 7);
+    // sub system
+    *(pbyData+2) = SROMbyReadEmbedded(dwIoBase, 8);
+    *(pbyData+3) = SROMbyReadEmbedded(dwIoBase, 9);
+}
+
+/*
+ * Description: Auto Load EEPROM to MAC register
+ *
+ * Parameters:
+ *  In:
+ *      dwIoBase        - I/O base address
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if success; otherwise FALSE
+ *
+ */
+BOOL SROMbAutoLoad (DWORD_PTR dwIoBase)
+{
+    BYTE    byWait;
+    int     ii;
+
+    BYTE    byOrg;
+
+    VNSvInPortB(dwIoBase + MAC_REG_I2MCFG, &byOrg);
+    // turn on hardware retry
+    VNSvOutPortB(dwIoBase + MAC_REG_I2MCFG, (byOrg | I2MCFG_NORETRY));
+
+    MACvRegBitsOn(dwIoBase, MAC_REG_I2MCSR, I2MCSR_AUTOLD);
+
+    // ii = Rom Address
+    for (ii = 0; ii < EEP_MAX_CONTEXT_SIZE; ii++) {
+        MACvTimer0MicroSDelay(dwIoBase, CB_EEPROM_READBYTE_WAIT);
+        VNSvInPortB(dwIoBase + MAC_REG_I2MCSR, &byWait);
+        if (BITbIsBitOff(byWait, I2MCSR_AUTOLD))
+            break;
+    }
+
+    VNSvOutPortB(dwIoBase + MAC_REG_I2MCFG, byOrg);
+
+    if (ii == EEP_MAX_CONTEXT_SIZE)
+        return FALSE;
+    return TRUE;
+}
+
+
diff --git a/drivers/staging/vt6655/srom.h b/drivers/staging/vt6655/srom.h
new file mode 100644
index 00000000000..a4ca5f0b196
--- /dev/null
+++ b/drivers/staging/vt6655/srom.h
@@ -0,0 +1,179 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: srom.h
+ *
+ * Purpose: Implement functions to access eeprom
+ *
+ * Author: Jerry Chen
+ *
+ * Date: Jan 29, 2003
+ *
+ */
+
+
+#ifndef __SROM_H__
+#define __SROM_H__
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+
+
+/*---------------------  Export Definitions -------------------------*/
+
+
+#define EEP_MAX_CONTEXT_SIZE    256
+
+#define CB_EEPROM_READBYTE_WAIT 900     //us
+
+#define W_MAX_I2CRETRY          0x0fff
+
+//
+// Contents in the EEPROM
+//
+
+#define EEP_OFS_PAR         0x00        // physical address
+#define EEP_OFS_ANTENNA     0x16
+#define EEP_OFS_RADIOCTL    0x17
+#define EEP_OFS_RFTYPE      0x1B        // for select RF
+#define EEP_OFS_MINCHANNEL  0x1C        // Min Channel #
+#define EEP_OFS_MAXCHANNEL  0x1D        // Max Channel #
+#define EEP_OFS_SIGNATURE   0x1E        //
+#define EEP_OFS_ZONETYPE    0x1F        //
+#define EEP_OFS_RFTABLE     0x20        // RF POWER TABLE
+#define EEP_OFS_PWR_CCK     0x20
+#define EEP_OFS_SETPT_CCK   0x21
+#define EEP_OFS_PWR_OFDMG   0x23
+#define EEP_OFS_SETPT_OFDMG 0x24
+#define EEP_OFS_PWR_FORMULA_OST  0x26   //
+#define EEP_OFS_MAJOR_VER 0x2E
+#define EEP_OFS_MINOR_VER 0x2F
+#define EEP_OFS_CCK_PWR_TBL     0x30
+#define EEP_OFS_CCK_PWR_dBm     0x3F
+#define EEP_OFS_OFDM_PWR_TBL    0x40
+#define EEP_OFS_OFDM_PWR_dBm    0x4F
+//{{ RobertYu: 20041124
+#define EEP_OFS_SETPT_OFDMA         0x4E
+#define EEP_OFS_OFDMA_PWR_TBL       0x50
+//}}
+#define EEP_OFS_OFDMA_PWR_dBm       0xD2
+
+
+//----------need to remove --------------------
+#define EEP_OFS_BBTAB_LEN   0x70        // BB Table Length
+#define EEP_OFS_BBTAB_ADR   0x71        // BB Table Offset
+#define EEP_OFS_CHECKSUM    0xFF        // reserved area for baseband 28h ~ 78h
+
+#define EEP_I2C_DEV_ID      0x50        // EEPROM device address on the I2C bus
+
+
+//
+// Bits in EEP_OFS_ANTENNA
+//
+#define EEP_ANTENNA_MAIN    0x01
+#define EEP_ANTENNA_AUX     0x02
+#define EEP_ANTINV          0x04
+
+//
+// Bits in EEP_OFS_RADIOCTL
+//
+#define EEP_RADIOCTL_ENABLE 0x80
+#define EEP_RADIOCTL_INV    0x01
+
+
+
+/*---------------------  Export Types  ------------------------------*/
+
+// AT24C02 eeprom contents
+//      2048 bits = 256 bytes = 128 words
+//
+typedef struct tagSSromReg {
+    BYTE    abyPAR[6];                  // 0x00 (WORD)
+
+    WORD    wSUB_VID;                   // 0x03 (WORD)
+    WORD    wSUB_SID;
+
+    BYTE    byBCFG0;                    // 0x05 (WORD)
+    BYTE    byBCFG1;
+
+    BYTE    byFCR0;                     // 0x06 (WORD)
+    BYTE    byFCR1;
+    BYTE    byPMC0;                     // 0x07 (WORD)
+    BYTE    byPMC1;
+    BYTE    byMAXLAT;                   // 0x08 (WORD)
+    BYTE    byMINGNT;
+    BYTE    byCFG0;                     // 0x09 (WORD)
+    BYTE    byCFG1;
+    WORD    wCISPTR;                    // 0x0A (WORD)
+    WORD    wRsv0;                      // 0x0B (WORD)
+    WORD    wRsv1;                      // 0x0C (WORD)
+    BYTE    byBBPAIR;                   // 0x0D (WORD)
+    BYTE    byRFTYPE;
+    BYTE    byMinChannel;               // 0x0E (WORD)
+    BYTE    byMaxChannel;
+    BYTE    bySignature;                // 0x0F (WORD)
+    BYTE    byCheckSum;
+
+    BYTE    abyReserved0[96];           // 0x10 (WORD)
+    BYTE    abyCIS[128];                // 0x80 (WORD)
+} SSromReg, DEF* PSSromReg;
+
+/*---------------------  Export Macros ------------------------------*/
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+#ifdef __cplusplus
+extern "C" {                            /* Assume C declarations for C++ */
+#endif /* __cplusplus */
+
+
+BYTE SROMbyReadEmbedded(DWORD_PTR dwIoBase, BYTE byContntOffset);
+BOOL SROMbWriteEmbedded(DWORD_PTR dwIoBase, BYTE byContntOffset, BYTE byData);
+
+void SROMvRegBitsOn(DWORD_PTR dwIoBase, BYTE byContntOffset, BYTE byBits);
+void SROMvRegBitsOff(DWORD_PTR dwIoBase, BYTE byContntOffset, BYTE byBits);
+
+BOOL SROMbIsRegBitsOn(DWORD_PTR dwIoBase, BYTE byContntOffset, BYTE byTestBits);
+BOOL SROMbIsRegBitsOff(DWORD_PTR dwIoBase, BYTE byContntOffset, BYTE byTestBits);
+
+void SROMvReadAllContents(DWORD_PTR dwIoBase, PBYTE pbyEepromRegs);
+void SROMvWriteAllContents(DWORD_PTR dwIoBase, PBYTE pbyEepromRegs);
+
+void SROMvReadEtherAddress(DWORD_PTR dwIoBase, PBYTE pbyEtherAddress);
+void SROMvWriteEtherAddress(DWORD_PTR dwIoBase, PBYTE pbyEtherAddress);
+
+VOID SROMvReadSubSysVenId(DWORD_PTR dwIoBase, PDWORD pdwSubSysVenId);
+
+BOOL SROMbAutoLoad (DWORD_PTR dwIoBase);
+
+
+#ifdef __cplusplus
+}                                       /* End of extern "C" { */
+#endif /* __cplusplus */
+
+
+
+
+#endif // __EEPROM_H__
+
+
diff --git a/drivers/staging/vt6655/tbit.h b/drivers/staging/vt6655/tbit.h
new file mode 100644
index 00000000000..7c3a82e9b60
--- /dev/null
+++ b/drivers/staging/vt6655/tbit.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: tbit.h
+ *
+ * Purpose: Bit routines
+ *
+ * Author: Tevin Chen
+ *
+ * Date: May 21, 1996
+ *
+ */
+
+
+#ifndef __TBIT_H__
+#define __TBIT_H__
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+
+
+
+/*---------------------  Export Definitions -------------------------*/
+
+/*---------------------  Export Types  ------------------------------*/
+
+/*---------------------  Export Macros ------------------------------*/
+
+// test single bit on
+#define BITbIsBitOn(tData, tTestBit)                \
+    (((tData) & (tTestBit)) != 0)
+
+// test single bit off
+#define BITbIsBitOff(tData, tTestBit)               \
+    (((tData) & (tTestBit)) == 0)
+
+
+#define BITbIsAllBitsOn(tData, tTestBit)            \
+    (((tData) & (tTestBit)) == (tTestBit))
+
+#define BITbIsAllBitsOff(tData, tTestBit)           \
+    (((tData) & (tTestBit)) == 0)
+
+#define BITbIsAnyBitsOn(tData, tTestBit)            \
+    (((tData) & (tTestBit)) != 0)
+
+#define BITbIsAnyBitsOff(tData, tTestBit)           \
+    (((tData) & (tTestBit)) != (tTestBit))
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+
+
+
+#endif // __TBIT_H__
+
+
+
diff --git a/drivers/staging/vt6655/tcrc.c b/drivers/staging/vt6655/tcrc.c
new file mode 100644
index 00000000000..b70080c267c
--- /dev/null
+++ b/drivers/staging/vt6655/tcrc.c
@@ -0,0 +1,207 @@
+/*
+ * Copyright (c) 2003 VIA Networking, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: tcrc.c
+ *
+ * Purpose: Implement functions to caculate CRC
+ *
+ * Author: Tevin Chen
+ *
+ * Date: May 21, 1996
+ *
+ * Functions:
+ *      CRCdwCrc32 -
+ *      CRCdwGetCrc32 -
+ *      CRCdwGetCrc32Ex -
+ *
+ * Revision History:
+ *
+ */
+
+
+#if !defined(__TBIT_H__)
+#include "tbit.h"
+#endif
+#if !defined(__TCRC_H__)
+#include "tcrc.h"
+#endif
+
+
+
+
+/*---------------------  Static Definitions -------------------------*/
+
+/*---------------------  Static Classes  ----------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+
+// 32-bit CRC table
+static const DWORD s_adwCrc32Table[256] = {
+    0x00000000L, 0x77073096L, 0xEE0E612CL, 0x990951BAL,
+    0x076DC419L, 0x706AF48FL, 0xE963A535L, 0x9E6495A3L,
+    0x0EDB8832L, 0x79DCB8A4L, 0xE0D5E91EL, 0x97D2D988L,
+    0x09B64C2BL, 0x7EB17CBDL, 0xE7B82D07L, 0x90BF1D91L,
+    0x1DB71064L, 0x6AB020F2L, 0xF3B97148L, 0x84BE41DEL,
+    0x1ADAD47DL, 0x6DDDE4EBL, 0xF4D4B551L, 0x83D385C7L,
+    0x136C9856L, 0x646BA8C0L, 0xFD62F97AL, 0x8A65C9ECL,
+    0x14015C4FL, 0x63066CD9L, 0xFA0F3D63L, 0x8D080DF5L,
+    0x3B6E20C8L, 0x4C69105EL, 0xD56041E4L, 0xA2677172L,
+    0x3C03E4D1L, 0x4B04D447L, 0xD20D85FDL, 0xA50AB56BL,
+    0x35B5A8FAL, 0x42B2986CL, 0xDBBBC9D6L, 0xACBCF940L,
+    0x32D86CE3L, 0x45DF5C75L, 0xDCD60DCFL, 0xABD13D59L,
+    0x26D930ACL, 0x51DE003AL, 0xC8D75180L, 0xBFD06116L,
+    0x21B4F4B5L, 0x56B3C423L, 0xCFBA9599L, 0xB8BDA50FL,
+    0x2802B89EL, 0x5F058808L, 0xC60CD9B2L, 0xB10BE924L,
+    0x2F6F7C87L, 0x58684C11L, 0xC1611DABL, 0xB6662D3DL,
+    0x76DC4190L, 0x01DB7106L, 0x98D220BCL, 0xEFD5102AL,
+    0x71B18589L, 0x06B6B51FL, 0x9FBFE4A5L, 0xE8B8D433L,
+    0x7807C9A2L, 0x0F00F934L, 0x9609A88EL, 0xE10E9818L,
+    0x7F6A0DBBL, 0x086D3D2DL, 0x91646C97L, 0xE6635C01L,
+    0x6B6B51F4L, 0x1C6C6162L, 0x856530D8L, 0xF262004EL,
+    0x6C0695EDL, 0x1B01A57BL, 0x8208F4C1L, 0xF50FC457L,
+    0x65B0D9C6L, 0x12B7E950L, 0x8BBEB8EAL, 0xFCB9887CL,
+    0x62DD1DDFL, 0x15DA2D49L, 0x8CD37CF3L, 0xFBD44C65L,
+    0x4DB26158L, 0x3AB551CEL, 0xA3BC0074L, 0xD4BB30E2L,
+    0x4ADFA541L, 0x3DD895D7L, 0xA4D1C46DL, 0xD3D6F4FBL,
+    0x4369E96AL, 0x346ED9FCL, 0xAD678846L, 0xDA60B8D0L,
+    0x44042D73L, 0x33031DE5L, 0xAA0A4C5FL, 0xDD0D7CC9L,
+    0x5005713CL, 0x270241AAL, 0xBE0B1010L, 0xC90C2086L,
+    0x5768B525L, 0x206F85B3L, 0xB966D409L, 0xCE61E49FL,
+    0x5EDEF90EL, 0x29D9C998L, 0xB0D09822L, 0xC7D7A8B4L,
+    0x59B33D17L, 0x2EB40D81L, 0xB7BD5C3BL, 0xC0BA6CADL,
+    0xEDB88320L, 0x9ABFB3B6L, 0x03B6E20CL, 0x74B1D29AL,
+    0xEAD54739L, 0x9DD277AFL, 0x04DB2615L, 0x73DC1683L,
+    0xE3630B12L, 0x94643B84L, 0x0D6D6A3EL, 0x7A6A5AA8L,
+    0xE40ECF0BL, 0x9309FF9DL, 0x0A00AE27L, 0x7D079EB1L,
+    0xF00F9344L, 0x8708A3D2L, 0x1E01F268L, 0x6906C2FEL,
+    0xF762575DL, 0x806567CBL, 0x196C3671L, 0x6E6B06E7L,
+    0xFED41B76L, 0x89D32BE0L, 0x10DA7A5AL, 0x67DD4ACCL,
+    0xF9B9DF6FL, 0x8EBEEFF9L, 0x17B7BE43L, 0x60B08ED5L,
+    0xD6D6A3E8L, 0xA1D1937EL, 0x38D8C2C4L, 0x4FDFF252L,
+    0xD1BB67F1L, 0xA6BC5767L, 0x3FB506DDL, 0x48B2364BL,
+    0xD80D2BDAL, 0xAF0A1B4CL, 0x36034AF6L, 0x41047A60L,
+    0xDF60EFC3L, 0xA867DF55L, 0x316E8EEFL, 0x4669BE79L,
+    0xCB61B38CL, 0xBC66831AL, 0x256FD2A0L, 0x5268E236L,
+    0xCC0C7795L, 0xBB0B4703L, 0x220216B9L, 0x5505262FL,
+    0xC5BA3BBEL, 0xB2BD0B28L, 0x2BB45A92L, 0x5CB36A04L,
+    0xC2D7FFA7L, 0xB5D0CF31L, 0x2CD99E8BL, 0x5BDEAE1DL,
+    0x9B64C2B0L, 0xEC63F226L, 0x756AA39CL, 0x026D930AL,
+    0x9C0906A9L, 0xEB0E363FL, 0x72076785L, 0x05005713L,
+    0x95BF4A82L, 0xE2B87A14L, 0x7BB12BAEL, 0x0CB61B38L,
+    0x92D28E9BL, 0xE5D5BE0DL, 0x7CDCEFB7L, 0x0BDBDF21L,
+    0x86D3D2D4L, 0xF1D4E242L, 0x68DDB3F8L, 0x1FDA836EL,
+    0x81BE16CDL, 0xF6B9265BL, 0x6FB077E1L, 0x18B74777L,
+    0x88085AE6L, 0xFF0F6A70L, 0x66063BCAL, 0x11010B5CL,
+    0x8F659EFFL, 0xF862AE69L, 0x616BFFD3L, 0x166CCF45L,
+    0xA00AE278L, 0xD70DD2EEL, 0x4E048354L, 0x3903B3C2L,
+    0xA7672661L, 0xD06016F7L, 0x4969474DL, 0x3E6E77DBL,
+    0xAED16A4AL, 0xD9D65ADCL, 0x40DF0B66L, 0x37D83BF0L,
+    0xA9BCAE53L, 0xDEBB9EC5L, 0x47B2CF7FL, 0x30B5FFE9L,
+    0xBDBDF21CL, 0xCABAC28AL, 0x53B39330L, 0x24B4A3A6L,
+    0xBAD03605L, 0xCDD70693L, 0x54DE5729L, 0x23D967BFL,
+    0xB3667A2EL, 0xC4614AB8L, 0x5D681B02L, 0x2A6F2B94L,
+    0xB40BBE37L, 0xC30C8EA1L, 0x5A05DF1BL, 0x2D02EF8DL
+};
+
+/*---------------------  Static Functions  --------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+
+
+
+/*+
+ *
+ * Description:
+ *    Generate a CRC-32 from the data stream
+ *
+ * Parameters:
+ *  In:
+ *      pbyData     - the data stream
+ *      cbByte      - the length of the stream
+ *      dwCrcSeed   - Seed for CRC32
+ *  Out:
+ *      none
+ *
+ * Return Value: CRC-32
+ *
+-*/
+DWORD CRCdwCrc32 (PBYTE pbyData, UINT cbByte, DWORD dwCrcSeed)
+{
+    DWORD dwCrc;
+
+    dwCrc = dwCrcSeed;
+    while (cbByte--) {
+        dwCrc = s_adwCrc32Table[(BYTE)((dwCrc ^ (*pbyData)) & 0xFF)] ^ (dwCrc >> 8);
+        pbyData++;
+    }
+
+    return dwCrc;
+}
+
+
+/*+
+ *
+ * Description:
+ * To test CRC generator, input 8 bytes packet
+ *      -- 0xff 0xff 0xff 0xff 0x00 0x00 0x00 0x00
+ * the generated CRC should be
+ *      -- 0xff 0xff 0xff 0xff
+ *
+ * Parameters:
+ *  In:
+ *      pbyData     - the data stream
+ *      cbByte      - the length of the stream
+ *  Out:
+ *      none
+ *
+ * Return Value: CRC-32
+ *
+-*/
+DWORD CRCdwGetCrc32 (PBYTE pbyData, UINT cbByte)
+{
+    return ~CRCdwCrc32(pbyData, cbByte, 0xFFFFFFFFL);
+}
+
+
+/*+
+ *
+ * Description:
+ *
+ * NOTE.... Because CRCdwGetCrc32Ex() is an iteration function,
+ *          this means we will use the output of CRCdwGetCrc32Ex()
+ *          to be a new argument to do next CRCdwGetCrc32Ex() calculation.
+ *          Thus, the final result must be inverted to be the
+ *          correct answer.
+ *
+ * Parameters:
+ *  In:
+ *      pbyData     - the data stream
+ *      cbByte      - the length of the stream
+ *  Out:
+ *      none
+ *
+ * Return Value: CRC-32
+ *
+-*/
+DWORD CRCdwGetCrc32Ex(PBYTE pbyData, UINT cbByte, DWORD dwPreCRC)
+{
+    return CRCdwCrc32(pbyData, cbByte, dwPreCRC);
+}
+
+
diff --git a/drivers/staging/vt6655/tcrc.h b/drivers/staging/vt6655/tcrc.h
new file mode 100644
index 00000000000..ebea22ed2da
--- /dev/null
+++ b/drivers/staging/vt6655/tcrc.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright (c) 2003 VIA Networking, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: tcrc.h
+ *
+ * Purpose: Implement functions to caculate CRC
+ *
+ * Author: Tevin Chen
+ *
+ * Date: Jan. 28, 1997
+ *
+ */
+
+
+#ifndef __TCRC_H__
+#define __TCRC_H__
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+
+
+
+
+/*---------------------  Export Definitions -------------------------*/
+
+/*---------------------  Export Types  ------------------------------*/
+
+/*---------------------  Export Macros ------------------------------*/
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+#ifdef __cplusplus
+extern "C" {                            /* Assume C declarations for C++ */
+#endif /* __cplusplus */
+
+
+DWORD CRCdwCrc32(PBYTE pbyData, UINT cbByte, DWORD dwCrcSeed);
+DWORD CRCdwGetCrc32(PBYTE pbyData, UINT cbByte);
+DWORD CRCdwGetCrc32Ex(PBYTE pbyData, UINT cbByte, DWORD dwPreCRC);
+
+
+#ifdef __cplusplus
+}                                       /* End of extern "C" { */
+#endif /* __cplusplus */
+
+
+
+
+#endif // __TCRC_H__
+
+
+
diff --git a/drivers/staging/vt6655/test b/drivers/staging/vt6655/test
new file mode 100644
index 00000000000..039f7d71c53
--- /dev/null
+++ b/drivers/staging/vt6655/test
@@ -0,0 +1,9 @@
+KSP :=  /lib/modules/$(shell uname -r)/build \
+	/usr/src/linux-$(shell uname -r) \
+	/usr/src/linux-$(shell uname -r | sed 's/-.*//') \
+#	/usr/src/kernel-headers-$(shell uname -r) \
+#	/usr/src/kernel-source-$(shell uname -r) \
+#	/usr/src/linux-$(shell uname -r | sed 's/\([0-9]*\.[0-9]*\)\..*/\1/') \
+#	/usr/src/linux   /home/plice
+test_dir = $(shell [ -e $(dir)/include/linux ] && echo $(dir))
+KSP := $(foreach dir, $(KSP), $(test_dir))
\ No newline at end of file
diff --git a/drivers/staging/vt6655/tether.c b/drivers/staging/vt6655/tether.c
new file mode 100644
index 00000000000..fd69423fe14
--- /dev/null
+++ b/drivers/staging/vt6655/tether.c
@@ -0,0 +1,123 @@
+/*
+ * Copyright (c) 2003 VIA Networking, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: tether.c
+ *
+ * Purpose:
+ *
+ * Author: Tevin Chen
+ *
+ * Date: May 21, 1996
+ *
+ * Functions:
+ *      ETHbyGetHashIndexByCrc32 - Caculate multicast hash value by CRC32
+ *      ETHbIsBufferCrc32Ok - Check CRC value of the buffer if Ok or not
+ *
+ * Revision History:
+ *
+ */
+
+#if !defined(__DEVICE_H__)
+#include "device.h"
+#endif
+#if !defined(__TMACRO_H__)
+#include "tmacro.h"
+#endif
+#if !defined(__TBIT_H__)
+#include "tbit.h"
+#endif
+#if !defined(__TCRC_H__)
+#include "tcrc.h"
+#endif
+#if !defined(__TETHER_H__)
+#include "tether.h"
+#endif
+
+
+
+
+/*---------------------  Static Definitions -------------------------*/
+
+/*---------------------  Static Classes  ----------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+
+/*---------------------  Static Functions  --------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+
+
+/*
+ * Description: Caculate multicast hash value by CRC32
+ *
+ * Parameters:
+ *  In:
+ *		pbyMultiAddr    - Multicast Address
+ *  Out:
+ *      none
+ *
+ * Return Value: Hash value
+ *
+ */
+BYTE ETHbyGetHashIndexByCrc32 (PBYTE pbyMultiAddr)
+{
+    int     ii;
+    BYTE    byTmpHash;
+    BYTE    byHash = 0;
+
+    // get the least 6-bits from CRC generator
+    byTmpHash = (BYTE)(CRCdwCrc32(pbyMultiAddr, U_ETHER_ADDR_LEN,
+            0xFFFFFFFFL) & 0x3F);
+    // reverse most bit to least bit
+    for (ii = 0; ii < (sizeof(byTmpHash) * 8); ii++) {
+        byHash <<= 1;
+        if (BITbIsBitOn(byTmpHash, 0x01))
+            byHash |= 1;
+        byTmpHash >>= 1;
+    }
+
+    // adjust 6-bits to the right most
+    return (byHash >> 2);
+}
+
+
+/*
+ * Description: Check CRC value of the buffer if Ok or not
+ *
+ * Parameters:
+ *  In:
+ *		pbyBuffer	    - pointer of buffer (normally is rx buffer)
+ *		cbFrameLength	- length of buffer, including CRC portion
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if ok; FALSE if error.
+ *
+ */
+BOOL ETHbIsBufferCrc32Ok (PBYTE pbyBuffer, UINT cbFrameLength)
+{
+    DWORD dwCRC;
+
+    dwCRC = CRCdwGetCrc32(pbyBuffer, cbFrameLength - 4);
+    if (cpu_to_le32(*((PDWORD)(pbyBuffer + cbFrameLength - 4))) != dwCRC) {
+        return FALSE;
+    }
+    return TRUE;
+}
+
diff --git a/drivers/staging/vt6655/tether.h b/drivers/staging/vt6655/tether.h
new file mode 100644
index 00000000000..920a8bb6835
--- /dev/null
+++ b/drivers/staging/vt6655/tether.h
@@ -0,0 +1,256 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: tether.h
+ *
+ * Purpose:
+ *
+ * Author: Tevin Chen
+ *
+ * Date: Jan. 28, 1997
+ *
+ */
+
+
+
+#ifndef __TETHER_H__
+#define __TETHER_H__
+
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+
+
+
+
+/*---------------------  Export Definitions -------------------------*/
+//
+// constants
+//
+#define U_ETHER_ADDR_LEN    6           // Ethernet address length
+#define U_TYPE_LEN          2           //
+#define U_CRC_LEN           4           //
+#define U_HEADER_LEN        (U_ETHER_ADDR_LEN * 2 + U_TYPE_LEN)
+#define U_ETHER_ADDR_STR_LEN (U_ETHER_ADDR_LEN * 2 + 1)
+                                        // Ethernet address string length
+
+#define MIN_DATA_LEN        46          // min data length
+#define MAX_DATA_LEN        1500        // max data length
+
+#define MIN_PACKET_LEN      (MIN_DATA_LEN + U_HEADER_LEN)
+                                        // 60
+                                        // min total packet length (tx)
+#define MAX_PACKET_LEN      (MAX_DATA_LEN + U_HEADER_LEN)
+                                        // 1514
+                                        // max total packet length (tx)
+
+#define MAX_LOOKAHEAD_SIZE  MAX_PACKET_LEN
+
+#define U_MULTI_ADDR_LEN    8           // multicast address length
+
+
+#ifdef __BIG_ENDIAN
+
+#define TYPE_PKT_IP         0x0800      //
+#define TYPE_PKT_ARP        0x0806      //
+#define TYPE_PKT_RARP       0x8035      //
+#define TYPE_PKT_IPX	    0x8137	    //
+#define TYPE_PKT_802_1x     0x888e
+#define TYPE_PKT_PreAuth    0x88C7
+
+#define TYPE_PKT_PING_M_REQ 0x8011      // master reguest
+#define TYPE_PKT_PING_S_GNT 0x8022      // slave grant
+#define TYPE_PKT_PING_M     0x8077      // pingpong master packet
+#define TYPE_PKT_PING_S     0x8088      // pingpong slave packet
+#define TYPE_PKT_WOL_M_REQ  0x8033      // WOL waker request
+#define TYPE_PKT_WOL_S_GNT  0x8044      // WOL sleeper grant
+#define TYPE_MGMT_PROBE_RSP 0x5000
+#define TYPE_PKT_VNT_DIAG   0x8011      // Diag Pkt
+#define TYPE_PKT_VNT_PER    0x8888      // Diag PER Pkt
+//
+// wFrameCtl field in the S802_11Header
+//
+// NOTE....
+//   in network byte order, high byte is going first
+#define FC_TODS             0x0001
+#define FC_FROMDS           0x0002
+#define FC_MOREFRAG         0x0004
+#define FC_RETRY            0x0008
+#define FC_POWERMGT         0x0010
+#define FC_MOREDATA         0x0020
+#define FC_WEP              0x0040
+#define TYPE_802_11_ATIM    0x9000
+
+#define TYPE_802_11_DATA    0x0800
+#define TYPE_802_11_CTL     0x0400
+#define TYPE_802_11_MGMT    0x0000
+#define TYPE_802_11_MASK    0x0C00
+#define TYPE_SUBTYPE_MASK   0xFC00
+#define TYPE_802_11_NODATA  0x4000
+#define TYPE_DATE_NULL      0x4800
+
+#define TYPE_CTL_PSPOLL     0xa400
+#define TYPE_CTL_RTS        0xb400
+#define TYPE_CTL_CTS        0xc400
+#define TYPE_CTL_ACK        0xd400
+
+
+//#define WEP_IV_MASK         0xFFFFFF00
+
+#else //if LITTLE_ENDIAN
+//
+// wType field in the SEthernetHeader
+//
+// NOTE....
+//   in network byte order, high byte is going first
+#define TYPE_PKT_IP         0x0008      //
+#define TYPE_PKT_ARP        0x0608      //
+#define TYPE_PKT_RARP       0x3580      //
+#define TYPE_PKT_IPX	    0x3781	    //
+
+#define TYPE_PKT_802_1x     0x8e88
+#define TYPE_PKT_PreAuth    0xC788
+
+#define TYPE_PKT_PING_M_REQ 0x1180      // master reguest
+#define TYPE_PKT_PING_S_GNT 0x2280      // slave grant
+#define TYPE_PKT_PING_M     0x7780      // pingpong master packet
+#define TYPE_PKT_PING_S     0x8880      // pingpong slave packet
+#define TYPE_PKT_WOL_M_REQ  0x3380      // WOL waker request
+#define TYPE_PKT_WOL_S_GNT  0x4480      // WOL sleeper grant
+#define TYPE_MGMT_PROBE_RSP 0x0050
+#define TYPE_PKT_VNT_DIAG   0x1180      // Diag Pkt
+#define TYPE_PKT_VNT_PER    0x8888      // Diag PER Pkt
+//
+// wFrameCtl field in the S802_11Header
+//
+// NOTE....
+//   in network byte order, high byte is going first
+#define FC_TODS             0x0100
+#define FC_FROMDS           0x0200
+#define FC_MOREFRAG         0x0400
+#define FC_RETRY            0x0800
+#define FC_POWERMGT         0x1000
+#define FC_MOREDATA         0x2000
+#define FC_WEP              0x4000
+#define TYPE_802_11_ATIM    0x0090
+
+#define TYPE_802_11_DATA    0x0008
+#define TYPE_802_11_CTL     0x0004
+#define TYPE_802_11_MGMT    0x0000
+#define TYPE_802_11_MASK    0x000C
+#define TYPE_SUBTYPE_MASK   0x00FC
+#define TYPE_802_11_NODATA  0x0040
+#define TYPE_DATE_NULL      0x0048
+
+#define TYPE_CTL_PSPOLL     0x00a4
+#define TYPE_CTL_RTS        0x00b4
+#define TYPE_CTL_CTS        0x00c4
+#define TYPE_CTL_ACK        0x00d4
+
+
+//#define WEP_IV_MASK         0x00FFFFFF
+
+#endif //#ifdef __BIG_ENDIAN
+
+#define WEP_IV_MASK         0x00FFFFFF
+
+/*---------------------  Export Types  ------------------------------*/
+//
+// Ethernet packet
+//
+typedef struct tagSEthernetHeader {
+    BYTE    abyDstAddr[U_ETHER_ADDR_LEN];
+    BYTE    abySrcAddr[U_ETHER_ADDR_LEN];
+    WORD    wType;
+}__attribute__ ((__packed__))
+SEthernetHeader, DEF* PSEthernetHeader;
+
+
+//
+// 802_3 packet
+//
+typedef struct tagS802_3Header {
+    BYTE    abyDstAddr[U_ETHER_ADDR_LEN];
+    BYTE    abySrcAddr[U_ETHER_ADDR_LEN];
+    WORD    wLen;
+}__attribute__ ((__packed__))
+S802_3Header, DEF* PS802_3Header;
+
+//
+// 802_11 packet
+//
+typedef struct tagS802_11Header {
+    WORD    wFrameCtl;
+    WORD    wDurationID;
+    BYTE    abyAddr1[U_ETHER_ADDR_LEN];
+    BYTE    abyAddr2[U_ETHER_ADDR_LEN];
+    BYTE    abyAddr3[U_ETHER_ADDR_LEN];
+    WORD    wSeqCtl;
+    BYTE    abyAddr4[U_ETHER_ADDR_LEN];
+}__attribute__ ((__packed__))
+S802_11Header, DEF* PS802_11Header;
+
+/*---------------------  Export Macros ------------------------------*/
+// Frame type macro
+
+#define IS_MULTICAST_ADDRESS(pbyEtherAddr)          \
+    ((*(PBYTE)(pbyEtherAddr) & 0x01) == 1)
+
+#define IS_BROADCAST_ADDRESS(pbyEtherAddr) (        \
+    (*(PDWORD)(pbyEtherAddr) == 0xFFFFFFFFL) &&     \
+    (*(PWORD)((PBYTE)(pbyEtherAddr) + 4) == 0xFFFF) \
+)
+
+#define IS_NULL_ADDRESS(pbyEtherAddr) (             \
+    (*(PDWORD)(pbyEtherAddr) == 0L) &&              \
+    (*(PWORD)((PBYTE)(pbyEtherAddr) + 4) == 0)      \
+)
+
+#define IS_ETH_ADDRESS_EQUAL(pbyAddr1, pbyAddr2) (  \
+    (*(PDWORD)(pbyAddr1) == *(PDWORD)(pbyAddr2)) && \
+    (*(PWORD)((PBYTE)(pbyAddr1) + 4) ==             \
+    *(PWORD)((PBYTE)(pbyAddr2) + 4))                \
+)
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+#ifdef __cplusplus
+extern "C" {                            /* Assume C declarations for C++ */
+#endif /* __cplusplus */
+
+
+BYTE ETHbyGetHashIndexByCrc32(PBYTE pbyMultiAddr);
+//BYTE ETHbyGetHashIndexByCrc(PBYTE pbyMultiAddr);
+BOOL ETHbIsBufferCrc32Ok(PBYTE pbyBuffer, UINT cbFrameLength);
+
+
+#ifdef __cplusplus
+}                                       /* End of extern "C" { */
+#endif /* __cplusplus */
+
+
+
+
+#endif // __TETHER_H__
+
+
+
diff --git a/drivers/staging/vt6655/tkip.c b/drivers/staging/vt6655/tkip.c
new file mode 100644
index 00000000000..2ded8420c39
--- /dev/null
+++ b/drivers/staging/vt6655/tkip.c
@@ -0,0 +1,284 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: tkip.c
+ *
+ * Purpose: Implement functions for 802.11i TKIP
+ *
+ * Author: Jerry Chen
+ *
+ * Date: Mar. 11, 2003
+ *
+ * Functions:
+ *      TKIPvMixKey - Get TKIP RC4 Key from TK,TA, and TSC
+ *
+ * Revision History:
+ *
+ */
+
+
+#if !defined(__TMACRO_H__)
+#include "tmacro.h"
+#endif
+#if !defined(__TBIT_H__)
+#include "tbit.h"
+#endif
+#if !defined(__TKIP_H__)
+#include "tkip.h"
+#endif
+#if !defined(__UMEM_H__)
+#include "umem.h"
+#endif
+
+
+/*---------------------  Static Definitions -------------------------*/
+
+/*---------------------  Static Classes  ----------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+
+/*---------------------  Static Functions  --------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Static Definitions -------------------------*/
+
+/*---------------------  Static Classes  ----------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+
+/* The Sbox is reduced to 2 16-bit wide tables, each with 256 entries. */
+/* The 2nd table is the same as the 1st but with the upper and lower   */
+/* bytes swapped. To allow an endian tolerant implementation, the byte */
+/* halves have been expressed independently here.                      */
+const BYTE TKIP_Sbox_Lower[256] = {
+    0xA5,0x84,0x99,0x8D,0x0D,0xBD,0xB1,0x54,
+    0x50,0x03,0xA9,0x7D,0x19,0x62,0xE6,0x9A,
+    0x45,0x9D,0x40,0x87,0x15,0xEB,0xC9,0x0B,
+    0xEC,0x67,0xFD,0xEA,0xBF,0xF7,0x96,0x5B,
+    0xC2,0x1C,0xAE,0x6A,0x5A,0x41,0x02,0x4F,
+    0x5C,0xF4,0x34,0x08,0x93,0x73,0x53,0x3F,
+    0x0C,0x52,0x65,0x5E,0x28,0xA1,0x0F,0xB5,
+    0x09,0x36,0x9B,0x3D,0x26,0x69,0xCD,0x9F,
+    0x1B,0x9E,0x74,0x2E,0x2D,0xB2,0xEE,0xFB,
+    0xF6,0x4D,0x61,0xCE,0x7B,0x3E,0x71,0x97,
+    0xF5,0x68,0x00,0x2C,0x60,0x1F,0xC8,0xED,
+    0xBE,0x46,0xD9,0x4B,0xDE,0xD4,0xE8,0x4A,
+    0x6B,0x2A,0xE5,0x16,0xC5,0xD7,0x55,0x94,
+    0xCF,0x10,0x06,0x81,0xF0,0x44,0xBA,0xE3,
+    0xF3,0xFE,0xC0,0x8A,0xAD,0xBC,0x48,0x04,
+    0xDF,0xC1,0x75,0x63,0x30,0x1A,0x0E,0x6D,
+    0x4C,0x14,0x35,0x2F,0xE1,0xA2,0xCC,0x39,
+    0x57,0xF2,0x82,0x47,0xAC,0xE7,0x2B,0x95,
+    0xA0,0x98,0xD1,0x7F,0x66,0x7E,0xAB,0x83,
+    0xCA,0x29,0xD3,0x3C,0x79,0xE2,0x1D,0x76,
+    0x3B,0x56,0x4E,0x1E,0xDB,0x0A,0x6C,0xE4,
+    0x5D,0x6E,0xEF,0xA6,0xA8,0xA4,0x37,0x8B,
+    0x32,0x43,0x59,0xB7,0x8C,0x64,0xD2,0xE0,
+    0xB4,0xFA,0x07,0x25,0xAF,0x8E,0xE9,0x18,
+    0xD5,0x88,0x6F,0x72,0x24,0xF1,0xC7,0x51,
+    0x23,0x7C,0x9C,0x21,0xDD,0xDC,0x86,0x85,
+    0x90,0x42,0xC4,0xAA,0xD8,0x05,0x01,0x12,
+    0xA3,0x5F,0xF9,0xD0,0x91,0x58,0x27,0xB9,
+    0x38,0x13,0xB3,0x33,0xBB,0x70,0x89,0xA7,
+    0xB6,0x22,0x92,0x20,0x49,0xFF,0x78,0x7A,
+    0x8F,0xF8,0x80,0x17,0xDA,0x31,0xC6,0xB8,
+    0xC3,0xB0,0x77,0x11,0xCB,0xFC,0xD6,0x3A
+};
+
+const BYTE TKIP_Sbox_Upper[256] = {
+    0xC6,0xF8,0xEE,0xF6,0xFF,0xD6,0xDE,0x91,
+    0x60,0x02,0xCE,0x56,0xE7,0xB5,0x4D,0xEC,
+    0x8F,0x1F,0x89,0xFA,0xEF,0xB2,0x8E,0xFB,
+    0x41,0xB3,0x5F,0x45,0x23,0x53,0xE4,0x9B,
+    0x75,0xE1,0x3D,0x4C,0x6C,0x7E,0xF5,0x83,
+    0x68,0x51,0xD1,0xF9,0xE2,0xAB,0x62,0x2A,
+    0x08,0x95,0x46,0x9D,0x30,0x37,0x0A,0x2F,
+    0x0E,0x24,0x1B,0xDF,0xCD,0x4E,0x7F,0xEA,
+    0x12,0x1D,0x58,0x34,0x36,0xDC,0xB4,0x5B,
+    0xA4,0x76,0xB7,0x7D,0x52,0xDD,0x5E,0x13,
+    0xA6,0xB9,0x00,0xC1,0x40,0xE3,0x79,0xB6,
+    0xD4,0x8D,0x67,0x72,0x94,0x98,0xB0,0x85,
+    0xBB,0xC5,0x4F,0xED,0x86,0x9A,0x66,0x11,
+    0x8A,0xE9,0x04,0xFE,0xA0,0x78,0x25,0x4B,
+    0xA2,0x5D,0x80,0x05,0x3F,0x21,0x70,0xF1,
+    0x63,0x77,0xAF,0x42,0x20,0xE5,0xFD,0xBF,
+    0x81,0x18,0x26,0xC3,0xBE,0x35,0x88,0x2E,
+    0x93,0x55,0xFC,0x7A,0xC8,0xBA,0x32,0xE6,
+    0xC0,0x19,0x9E,0xA3,0x44,0x54,0x3B,0x0B,
+    0x8C,0xC7,0x6B,0x28,0xA7,0xBC,0x16,0xAD,
+    0xDB,0x64,0x74,0x14,0x92,0x0C,0x48,0xB8,
+    0x9F,0xBD,0x43,0xC4,0x39,0x31,0xD3,0xF2,
+    0xD5,0x8B,0x6E,0xDA,0x01,0xB1,0x9C,0x49,
+    0xD8,0xAC,0xF3,0xCF,0xCA,0xF4,0x47,0x10,
+    0x6F,0xF0,0x4A,0x5C,0x38,0x57,0x73,0x97,
+    0xCB,0xA1,0xE8,0x3E,0x96,0x61,0x0D,0x0F,
+    0xE0,0x7C,0x71,0xCC,0x90,0x06,0xF7,0x1C,
+    0xC2,0x6A,0xAE,0x69,0x17,0x99,0x3A,0x27,
+    0xD9,0xEB,0x2B,0x22,0xD2,0xA9,0x07,0x33,
+    0x2D,0x3C,0x15,0xC9,0x87,0xAA,0x50,0xA5,
+    0x03,0x59,0x09,0x1A,0x65,0xD7,0x84,0xD0,
+    0x82,0x29,0x5A,0x1E,0x7B,0xA8,0x6D,0x2C
+};
+
+
+//STKIPKeyManagement  sTKIPKeyTable[MAX_TKIP_KEY];
+
+/*---------------------  Static Functions  --------------------------*/
+unsigned int tkip_sbox(unsigned int index);
+unsigned int rotr1(unsigned int a);
+
+/*---------------------  Export Variables  --------------------------*/
+
+/************************************************************/
+/* tkip_sbox()                                              */
+/* Returns a 16 bit value from a 64K entry table. The Table */
+/* is synthesized from two 256 entry byte wide tables.      */
+/************************************************************/
+unsigned int tkip_sbox(unsigned int index)
+{
+    unsigned int index_low;
+    unsigned int index_high;
+    unsigned int left, right;
+
+    index_low = (index % 256);
+    index_high = ((index >> 8) % 256);
+
+    left = TKIP_Sbox_Lower[index_low] + (TKIP_Sbox_Upper[index_low] * 256);
+    right = TKIP_Sbox_Upper[index_high] + (TKIP_Sbox_Lower[index_high] * 256);
+
+    return (left ^ right);
+};
+
+
+unsigned int rotr1(unsigned int a)
+{
+    unsigned int b;
+
+    if ((a & 0x01) == 0x01) {
+        b = (a >> 1) | 0x8000;
+    } else {
+        b = (a >> 1) & 0x7fff;
+    }
+    b = b % 65536;
+    return b;
+}
+
+
+/*
+ * Description: Caculate RC4Key fom TK, TA, and TSC
+ *
+ * Parameters:
+ *  In:
+ *      pbyTKey         - TKey
+ *      pbyTA           - TA
+ *      dwTSC           - TSC
+ *  Out:
+ *      pbyRC4Key       - RC4Key
+ *
+ * Return Value: none
+ *
+ */
+VOID TKIPvMixKey(
+    PBYTE   pbyTKey,
+    PBYTE   pbyTA,
+    WORD    wTSC15_0,
+    DWORD   dwTSC47_16,
+    PBYTE   pbyRC4Key
+    )
+{
+    unsigned int p1k[5];
+//    unsigned int ttak0, ttak1, ttak2, ttak3, ttak4;
+    unsigned int tsc0, tsc1, tsc2;
+    unsigned int ppk0, ppk1, ppk2, ppk3, ppk4, ppk5;
+    unsigned long int pnl,pnh;
+
+    int i, j;
+
+    pnl = wTSC15_0;
+    pnh = dwTSC47_16;
+
+    tsc0 = (unsigned int)((pnh >> 16) % 65536); /* msb */
+    tsc1 = (unsigned int)(pnh % 65536);
+    tsc2 = (unsigned int)(pnl % 65536); /* lsb */
+
+    /* Phase 1, step 1 */
+    p1k[0] = tsc1;
+    p1k[1] = tsc0;
+    p1k[2] = (unsigned int)(pbyTA[0] + (pbyTA[1]*256));
+    p1k[3] = (unsigned int)(pbyTA[2] + (pbyTA[3]*256));
+    p1k[4] = (unsigned int)(pbyTA[4] + (pbyTA[5]*256));
+
+    /* Phase 1, step 2 */
+    for (i=0; i<8; i++) {
+        j = 2*(i & 1);
+        p1k[0] = (p1k[0] + tkip_sbox( (p1k[4] ^ ((256*pbyTKey[1+j]) + pbyTKey[j])) % 65536 )) % 65536;
+        p1k[1] = (p1k[1] + tkip_sbox( (p1k[0] ^ ((256*pbyTKey[5+j]) + pbyTKey[4+j])) % 65536 )) % 65536;
+        p1k[2] = (p1k[2] + tkip_sbox( (p1k[1] ^ ((256*pbyTKey[9+j]) + pbyTKey[8+j])) % 65536 )) % 65536;
+        p1k[3] = (p1k[3] + tkip_sbox( (p1k[2] ^ ((256*pbyTKey[13+j]) + pbyTKey[12+j])) % 65536 )) % 65536;
+        p1k[4] = (p1k[4] + tkip_sbox( (p1k[3] ^ (((256*pbyTKey[1+j]) + pbyTKey[j]))) % 65536 )) % 65536;
+        p1k[4] = (p1k[4] + i) % 65536;
+    }
+    /* Phase 2, Step 1 */
+    ppk0 = p1k[0];
+    ppk1 = p1k[1];
+    ppk2 = p1k[2];
+    ppk3 = p1k[3];
+    ppk4 = p1k[4];
+    ppk5 = (p1k[4] + tsc2) % 65536;
+
+    /* Phase2, Step 2 */
+    ppk0 = ppk0 + tkip_sbox( (ppk5 ^ ((256*pbyTKey[1]) + pbyTKey[0])) % 65536);
+    ppk1 = ppk1 + tkip_sbox( (ppk0 ^ ((256*pbyTKey[3]) + pbyTKey[2])) % 65536);
+    ppk2 = ppk2 + tkip_sbox( (ppk1 ^ ((256*pbyTKey[5]) + pbyTKey[4])) % 65536);
+    ppk3 = ppk3 + tkip_sbox( (ppk2 ^ ((256*pbyTKey[7]) + pbyTKey[6])) % 65536);
+    ppk4 = ppk4 + tkip_sbox( (ppk3 ^ ((256*pbyTKey[9]) + pbyTKey[8])) % 65536);
+    ppk5 = ppk5 + tkip_sbox( (ppk4 ^ ((256*pbyTKey[11]) + pbyTKey[10])) % 65536);
+
+    ppk0 = ppk0 + rotr1(ppk5 ^ ((256*pbyTKey[13]) + pbyTKey[12]));
+    ppk1 = ppk1 + rotr1(ppk0 ^ ((256*pbyTKey[15]) + pbyTKey[14]));
+    ppk2 = ppk2 + rotr1(ppk1);
+    ppk3 = ppk3 + rotr1(ppk2);
+    ppk4 = ppk4 + rotr1(ppk3);
+    ppk5 = ppk5 + rotr1(ppk4);
+
+    /* Phase 2, Step 3 */
+    pbyRC4Key[0] = (tsc2 >> 8) % 256;
+    pbyRC4Key[1] = (((tsc2 >> 8) % 256) | 0x20) & 0x7f;
+    pbyRC4Key[2] = tsc2 % 256;
+    pbyRC4Key[3] = ((ppk5 ^ ((256*pbyTKey[1]) + pbyTKey[0])) >> 1) % 256;
+
+    pbyRC4Key[4] = ppk0 % 256;
+    pbyRC4Key[5] = (ppk0 >> 8) % 256;
+
+    pbyRC4Key[6] = ppk1 % 256;
+    pbyRC4Key[7] = (ppk1 >> 8) % 256;
+
+    pbyRC4Key[8] = ppk2 % 256;
+    pbyRC4Key[9] = (ppk2 >> 8) % 256;
+
+    pbyRC4Key[10] = ppk3 % 256;
+    pbyRC4Key[11] = (ppk3 >> 8) % 256;
+
+    pbyRC4Key[12] = ppk4 % 256;
+    pbyRC4Key[13] = (ppk4 >> 8) % 256;
+
+    pbyRC4Key[14] = ppk5 % 256;
+    pbyRC4Key[15] = (ppk5 >> 8) % 256;
+}
diff --git a/drivers/staging/vt6655/tkip.h b/drivers/staging/vt6655/tkip.h
new file mode 100644
index 00000000000..dc8382b6701
--- /dev/null
+++ b/drivers/staging/vt6655/tkip.h
@@ -0,0 +1,76 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: tkip.h
+ *
+ * Purpose: Implement functions for 802.11i TKIP
+ *
+ * Author: Jerry Chen
+ *
+ * Date: Mar. 11, 2003
+ *
+ */
+
+
+#ifndef __TKIP_H__
+#define __TKIP_H__
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+
+#if !defined(__TETHER_H__)
+#include "tether.h"
+#endif
+
+
+
+/*---------------------  Export Definitions -------------------------*/
+#define TKIP_KEY_LEN        16
+
+/*---------------------  Export Types  ------------------------------*/
+
+/*---------------------  Export Macros ------------------------------*/
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+#ifdef __cplusplus
+extern "C" {                            /* Assume C declarations for C++ */
+#endif /* __cplusplus */
+
+VOID TKIPvMixKey(
+    PBYTE   pbyTKey,
+    PBYTE   pbyTA,
+    WORD    wTSC15_0,
+    DWORD   dwTSC47_16,
+    PBYTE   pbyRC4Key
+    );
+
+#ifdef __cplusplus
+}                                       /* End of extern "C" { */
+#endif /* __cplusplus */
+
+
+#endif // __TKIP_H__
+
+
+
diff --git a/drivers/staging/vt6655/tmacro.h b/drivers/staging/vt6655/tmacro.h
new file mode 100644
index 00000000000..3d932a258dd
--- /dev/null
+++ b/drivers/staging/vt6655/tmacro.h
@@ -0,0 +1,152 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: tmacro.h
+ *
+ * Purpose: define basic common types and macros
+ *
+ * Author: Tevin Chen
+ *
+ * Date: May 21, 1996
+ *
+ */
+
+
+#ifndef __TMACRO_H__
+#define __TMACRO_H__
+
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+
+
+
+
+/****** Common helper macros ***********************************************/
+
+#if !defined(LONIBBLE)
+#define LONIBBLE(b)         ((BYTE)(b) & 0x0F)
+#endif
+#if !defined(HINIBBLE)
+#define HINIBBLE(b)         ((BYTE)(((WORD)(b) >> 4) & 0x0F))
+#endif
+
+#if !defined(LOBYTE)
+#define LOBYTE(w)           ((BYTE)(w))
+#endif
+#if !defined(HIBYTE)
+#define HIBYTE(w)           ((BYTE)(((WORD)(w) >> 8) & 0xFF))
+#endif
+
+#if !defined(LOWORD)
+#define LOWORD(d)           ((WORD)(d))
+#endif
+#if !defined(HIWORD)
+#define HIWORD(d)           ((WORD)((((DWORD)(d)) >> 16) & 0xFFFF))
+#endif
+
+#define LODWORD(q)          ((q).u.dwLowDword)
+#define HIDWORD(q)          ((q).u.dwHighDword)
+
+
+
+#if !defined(MAKEBYTE)
+#define MAKEBYTE(ln, hn)    ((BYTE)(((BYTE)(ln) & 0x0F) | ((BYTE)(hn) << 4)))
+#endif
+#if !defined(MAKEWORD)
+#define MAKEWORD(lb, hb)    ((WORD)(((BYTE)(lb)) | (((WORD)((BYTE)(hb))) << 8)))
+#endif
+#if !defined(MAKEDWORD)
+#define MAKEDWORD(lw, hw)   ((DWORD)(((WORD)(lw)) | (((DWORD)((WORD)(hw))) << 16)))
+#endif
+#if !defined(MAKEQWORD)
+#define MAKEQWORD(ld, hd, pq) {pq->u.dwLowDword = ld; pq->u.dwHighDword = hd;}
+#endif
+
+#if !defined(MAKELONG)
+#define MAKELONG(low, high) ((LONG)(((WORD)(low)) | (((DWORD)((WORD)(high))) << 16)))
+#endif
+
+
+
+// Bytes Reverse: big endian to little endian convert
+#if !defined(REVWORD)
+#define REVWORD(w) ((WORD)( ((WORD)(w) >> 8) | ((WORD)(w) << 8) ))
+#endif
+#if !defined(REVDWORD)
+#define REVDWORD(d) (MAKEDWORD(MAKEWORD(HIBYTE(HIWORD(d)),LOBYTE(HIWORD(d))),MAKEWORD(HIBYTE(LOWORD(d)),LOBYTE(LOWORD(d)))))
+#endif
+
+/* map to known network names */
+/*
+#define ntohs(x)        REVWORD(x)
+#define ntohl(x)        REVDWORD(x)
+#define htons(x)        REVWORD(x)
+#define htonl(x)        REVDWORD(x)
+*/
+
+
+/*
+#ifndef NOMINMAX
+#ifndef max
+#define max(a,b)            (((a) > (b)) ? (a) : (b))
+#endif
+#ifndef min
+#define min(a,b)            (((a) < (b)) ? (a) : (b))
+#endif
+#endif // NOMINMAX
+*/
+
+
+
+/****** Misc macros ********************************************************/
+
+// get the field offset in the type(struct, class, ...)
+#define OFFSET(type, field) ((int)(&((type NEAR*)1)->field)-1)
+
+
+/* string equality shorthand */
+#define STR_EQ(x, y)        (strcmp(x, y) == 0)
+#define STR_NE(x, y)        (strcmp(x, y) != 0)
+
+
+// calculate element # of array
+#define ELEMENT_NUM(array)  (sizeof(array) / sizeof(array[0]))
+//#define ARRAY_SIZE(a)       (sizeof(a) / sizeof(a[0]))
+
+
+// null statement
+#define NULL_FUNC()
+
+
+/* Since not all compilers support structure assignment, the ASSIGN()
+ * macro is used. This controls how it's actually implemented.
+ */
+#ifdef	NOSTRUCTASSIGN	/* Version for old compilers that don't support it */
+#define	ASSIGN(a,b)	memcpy((char *)&(a),(char *)&(b),sizeof(b);
+#else			/* Version for compilers that do */
+#define	ASSIGN(a,b)	((a) = (b))
+#endif
+
+
+
+
+#endif // __TMACRO_H__
+
+
diff --git a/drivers/staging/vt6655/tpci.h b/drivers/staging/vt6655/tpci.h
new file mode 100644
index 00000000000..4a1c8ed75ca
--- /dev/null
+++ b/drivers/staging/vt6655/tpci.h
@@ -0,0 +1,117 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: tpci.h
+ *
+ * Purpose: PCI routines
+ *
+ * Author: Tevin Chen
+ *
+ * Date: May 21, 1996
+ *
+ */
+
+
+#ifndef __TPCI_H__
+#define __TPCI_H__
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+
+
+
+
+/*---------------------  Export Definitions -------------------------*/
+#define MAX_PCI_BUS             4       // max. # of PCI bus that we support
+#define MAX_PCI_DEVICE          32      // max. # of PCI devices
+
+
+//
+// Registers in the PCI configuration space
+//
+#define PCI_REG_VENDOR_ID       0x00    //
+#define PCI_REG_DEVICE_ID       0x02    //
+#define PCI_REG_COMMAND         0x04    //
+#define PCI_REG_STATUS          0x06    //
+#define PCI_REG_REV_ID          0x08    //
+#define PCI_REG_CLASS_CODE      0x09    //
+#define PCI_REG_CACHELINE_SIZE  0x0C    //
+#define PCI_REG_LAT_TIMER       0x0D    //
+#define PCI_REG_HDR_TYPE        0x0E    //
+#define PCI_REG_BIST            0x0F    //
+
+#define PCI_REG_BAR0            0x10    //
+#define PCI_REG_BAR1            0x14    //
+#define PCI_REG_BAR2            0x18    //
+#define PCI_REG_CARDBUS_CIS_PTR 0x28    //
+
+#define PCI_REG_SUB_VEN_ID      0x2C    //
+#define PCI_REG_SUB_SYS_ID      0x2E    //
+#define PCI_REG_EXP_ROM_BAR     0x30    //
+#define PCI_REG_CAP             0x34    //
+
+#define PCI_REG_INT_LINE        0x3C    //
+#define PCI_REG_INT_PIN         0x3D    //
+#define PCI_REG_MIN_GNT         0x3E    //
+#define PCI_REG_MAX_LAT         0x3F    //
+
+#define PCI_REG_MAX_SIZE        0x100   // maximun total PCI registers
+
+
+//
+// Bits in the COMMAND register
+//
+#define COMMAND_BUSM        0x04        //
+#define COMMAND_WAIT        0x80        //
+
+/*---------------------  Export Types  ------------------------------*/
+
+/*---------------------  Export Macros ------------------------------*/
+
+// macro MAKE Bus Dev Fun ID into WORD
+#define MAKE_BDF_TO_WORD(byBusId, byDevId, byFunId) \
+    MAKEWORD(                                       \
+        ((((BYTE)(byDevId)) & 0x1F) << 3) +         \
+            (((BYTE)(byFunId)) & 0x07),             \
+        (byBusId)                                   \
+        )
+
+#define GET_BUSID(wBusDevFunId) \
+    HIBYTE(wBusDevFunId)
+
+#define GET_DEVID(wBusDevFunId) \
+    (LOBYTE(wBusDevFunId) >> 3)
+
+#define GET_FUNID(wBusDevFunId) \
+    (LOBYTE(wBusDevFunId) & 0x07)
+
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+
+
+
+
+#endif // __TPCI_H__
+
+
diff --git a/drivers/staging/vt6655/ttype.h b/drivers/staging/vt6655/ttype.h
new file mode 100644
index 00000000000..1f26702cabf
--- /dev/null
+++ b/drivers/staging/vt6655/ttype.h
@@ -0,0 +1,386 @@
+/*
+ * File: ttype.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Purpose: define basic common types and macros
+ *
+ * Author: Tevin Chen
+ *
+ * Date: May 21, 1996
+ *
+ */
+
+
+#ifndef __TTYPE_H__
+#define __TTYPE_H__
+
+
+/******* Common definitions and typedefs ***********************************/
+
+#ifndef VOID
+#define VOID            void
+#endif
+
+#ifndef CONST
+#define CONST           const
+#endif
+
+#ifndef STATIC
+#define STATIC          static
+#endif
+
+#ifndef IN
+#define IN
+#endif
+
+#ifndef OUT
+#define OUT
+#endif
+
+#ifndef TxInSleep
+#define TxInSleep
+#endif
+#if! defined(__CPU8051)
+typedef int             BOOL;
+#else   // __CPU8051
+#define BOOL            int
+#endif  // __CPU8051
+
+#if !defined(TRUE)
+#define TRUE            1
+#endif
+#if !defined(FALSE)
+#define FALSE           0
+#endif
+
+
+#if !defined(SUCCESS)
+#define SUCCESS         0
+#endif
+#if !defined(FAILED)
+#define FAILED          -1
+#endif
+
+//2007-0809-01<Add>by MikeLiu
+#ifndef  update_BssList
+#define update_BssList
+#endif
+
+
+
+#ifndef WPA_SM_Transtatus
+#define WPA_SM_Transtatus
+#endif
+
+#ifndef Calcu_LinkQual
+#define Calcu_LinkQual
+#endif
+
+#ifndef Calcu_LinkQual
+#define Calcu_LinkQual
+#endif
+
+/****** Simple typedefs  ***************************************************/
+
+#if! defined(__CPU8051)
+
+/* These lines assume that your compiler's longs are 32 bits and
+ * shorts are 16 bits. It is already assumed that chars are 8 bits,
+ * but it doesn't matter if they're signed or unsigned.
+ */
+
+typedef signed char             I8;     /* 8-bit signed integer */
+typedef signed short            I16;    /* 16-bit signed integer */
+typedef signed long             I32;    /* 32-bit signed integer */
+
+typedef unsigned char           U8;     /* 8-bit unsigned integer */
+typedef unsigned short          U16;    /* 16-bit unsigned integer */
+typedef unsigned long           U32;    /* 32-bit unsigned integer */
+
+
+#if defined(__WIN32)
+typedef signed __int64          I64;    /* 64-bit signed integer */
+typedef unsigned __int64        U64;    /* 64-bit unsigned integer */
+#endif // __WIN32
+
+
+typedef char            CHAR;
+typedef signed short    SHORT;
+typedef signed int      INT;
+typedef signed long     LONG;
+
+typedef unsigned char   UCHAR;
+typedef unsigned short  USHORT;
+typedef unsigned int    UINT;
+typedef unsigned long   ULONG;
+typedef unsigned long long	ULONGLONG; //64 bit
+typedef unsigned long long	ULONGULONG;
+
+
+
+typedef unsigned char   BYTE;           //  8-bit
+typedef unsigned short  WORD;           // 16-bit
+typedef unsigned long   DWORD;          // 32-bit
+
+// QWORD is for those situation that we want
+// an 8-byte-aligned 8 byte long structure
+// which is NOT really a floating point number.
+typedef union tagUQuadWord {
+    struct {
+        DWORD   dwLowDword;
+        DWORD   dwHighDword;
+    } u;
+    double      DoNotUseThisField;
+} UQuadWord;
+typedef UQuadWord       QWORD;          // 64-bit
+
+
+
+#ifndef _TCHAR_DEFINED
+typedef char            TCHAR;
+typedef char*           PTCHAR;
+typedef unsigned char   TBYTE;
+typedef unsigned char*  PTBYTE;
+#define _TCHAR_DEFINED
+#endif
+
+#else   // __CPU8051
+
+#define U8              unsigned char
+#define U16             unsigned short
+#define U32             unsigned long
+
+#define USHORT          unsigned short
+#define UINT            unsigned int
+
+#define BYTE            unsigned char
+#define WORD            unsigned short
+#define DWORD           unsigned long
+
+
+#endif  // __CPU8051
+
+
+// maybe this should be defined in <limits.h>
+#define U8_MAX          0xFFU
+#define U16_MAX         0xFFFFU
+#define U32_MAX         0xFFFFFFFFUL
+
+#define BYTE_MAX        0xFFU
+#define WORD_MAX        0xFFFFU
+#define DWORD_MAX       0xFFFFFFFFUL
+
+
+
+
+/******* 32-bit vs. 16-bit definitions and typedefs ************************/
+
+#if !defined(NULL)
+#ifdef __cplusplus
+#define NULL            0
+#else
+#define NULL            ((void *)0)
+#endif // __cplusplus
+#endif // !NULL
+
+
+
+
+#if defined(__WIN32) || defined(__CPU8051)
+
+#if !defined(FAR)
+#define FAR
+#endif
+#if !defined(NEAR)
+#define NEAR
+#endif
+#if !defined(DEF)
+#define DEF
+#endif
+#if !defined(CALLBACK)
+#define CALLBACK
+#endif
+
+#else  // !__WIN32__
+
+#if !defined(FAR)
+#define FAR
+#endif
+#if !defined(NEAR)
+#define NEAR
+#endif
+#if !defined(DEF)
+// default pointer type is FAR, if you want near pointer just redefine it to NEAR
+#define DEF
+#endif
+#if !defined(CALLBACK)
+#define CALLBACK
+#endif
+
+#endif // !__WIN32__
+
+
+
+
+/****** Common pointer types ***********************************************/
+
+#if! defined(__CPU8051)
+
+typedef signed char DEF*        PI8;
+typedef signed short DEF*       PI16;
+typedef signed long DEF*        PI32;
+
+typedef unsigned char DEF*      PU8;
+typedef unsigned short DEF*     PU16;
+typedef unsigned long DEF*      PU32;
+
+#if defined(__WIN32)
+typedef signed __int64 DEF*     PI64;
+typedef unsigned __int64 DEF*   PU64;
+#endif // __WIN32
+
+#if !defined(_WIN64)
+typedef unsigned long   ULONG_PTR;      // 32-bit
+typedef unsigned long   DWORD_PTR;      // 32-bit
+#endif // _WIN64
+
+
+// boolean pointer
+typedef int DEF*            PBOOL;
+typedef int NEAR*           NPBOOL;
+typedef int FAR*            LPBOOL;
+
+typedef int DEF*            PINT;
+typedef int NEAR*           NPINT;
+typedef int FAR*            LPINT;
+typedef const int DEF*      PCINT;
+typedef const int NEAR*     NPCINT;
+typedef const int FAR*      LPCINT;
+
+typedef unsigned int DEF*           PUINT;
+typedef const unsigned int DEF*     PCUINT;
+
+typedef long DEF*           PLONG;
+typedef long NEAR*          NPLONG;
+typedef long FAR*           LPLONG;
+//typedef const long DEF*     PCLONG;
+typedef const long NEAR*    NPCLONG;
+typedef const long FAR*     LPCLONG;
+
+typedef BYTE DEF*           PBYTE;
+typedef BYTE NEAR*          NPBYTE;
+typedef BYTE FAR*           LPBYTE;
+typedef const BYTE DEF*     PCBYTE;
+typedef const BYTE NEAR*    NPCBYTE;
+typedef const BYTE FAR*     LPCBYTE;
+
+typedef WORD DEF*           PWORD;
+typedef WORD NEAR*          NPWORD;
+typedef WORD FAR*           LPWORD;
+typedef const WORD DEF*     PCWORD;
+typedef const WORD NEAR*    NPCWORD;
+typedef const WORD FAR*     LPCWORD;
+
+typedef DWORD DEF*          PDWORD;
+typedef DWORD NEAR*         NPDWORD;
+typedef DWORD FAR*          LPDWORD;
+typedef const DWORD DEF*    PCDWORD;
+typedef const DWORD NEAR*   NPCDWORD;
+typedef const DWORD FAR*    LPCDWORD;
+
+typedef QWORD DEF*          PQWORD;
+typedef QWORD NEAR*         NPQWORD;
+typedef QWORD FAR*          LPQWORD;
+typedef const QWORD DEF*    PCQWORD;
+typedef const QWORD NEAR*   NPCQWORD;
+typedef const QWORD FAR*    LPCQWORD;
+
+typedef void DEF*           PVOID;
+typedef void NEAR*          NPVOID;
+typedef void FAR*           LPVOID;
+
+// handle declaration
+#ifdef STRICT
+typedef void *HANDLE;
+#else
+typedef PVOID HANDLE;
+#endif
+
+//
+// ANSI (Single-byte Character) types
+//
+typedef char DEF*           PCH;
+typedef char NEAR*          NPCH;
+typedef char FAR*           LPCH;
+typedef const char DEF*     PCCH;
+typedef const char NEAR*    NPCCH;
+typedef const char FAR*     LPCCH;
+
+typedef char DEF*           PSTR;
+typedef char NEAR*          NPSTR;
+typedef char FAR*           LPSTR;
+typedef const char DEF*     PCSTR;
+typedef const char NEAR*    NPCSTR;
+typedef const char FAR*     LPCSTR;
+
+#endif  // !__CPU8051
+
+
+
+
+/****** Misc definitions, types ********************************************/
+
+// parameter prefix
+#ifndef IN
+#define IN
+#endif
+
+#ifndef OUT
+#define OUT
+#endif
+
+
+// unreferenced parameter macro to avoid warning message in MS C
+#if defined(__TURBOC__)
+
+//you should use "#pragma argsused" to avoid warning message in Borland C
+#ifndef UNREFERENCED_PARAMETER
+#define UNREFERENCED_PARAMETER(x)
+#endif
+
+#else
+
+#ifndef UNREFERENCED_PARAMETER
+//#define UNREFERENCED_PARAMETER(x) x
+#define UNREFERENCED_PARAMETER(x)
+#endif
+
+#endif
+
+
+// in-line assembly prefix
+#if defined(__TURBOC__)
+#define ASM             asm
+#else  // !__TURBOC__
+#define ASM             _asm
+#endif // !__TURBOC__
+
+
+
+
+#endif // __TTYPE_H__
+
+
diff --git a/drivers/staging/vt6655/umem.h b/drivers/staging/vt6655/umem.h
new file mode 100644
index 00000000000..2c3eafa038e
--- /dev/null
+++ b/drivers/staging/vt6655/umem.h
@@ -0,0 +1,75 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: umem.h
+ *
+ * Purpose: Define Memory macros
+ *
+ * Author: Tevin Chen
+ *
+ * Date: Mar 17, 1997
+ *
+ */
+
+
+#ifndef __UMEM_H__
+#define __UMEM_H__
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+
+
+
+/*---------------------  Export Definitions -------------------------*/
+// 4-byte memory tag
+#define MEM_TAG 'mTEW'
+
+// Macros used for memory allocation and deallocation.
+
+
+
+#define ZERO_MEMORY(Destination,Length) {       \
+            memset((PVOID)(Destination),        \
+            0,                                  \
+            (ULONG)(Length)                     \
+            );                                  \
+}
+
+#define MEMvCopy(pvDest, pvSource, uCount) {    \
+            memcpy((PVOID)(pvDest),             \
+            (PVOID)(pvSource),                  \
+            (ULONG)(uCount)                     \
+            );                                  \
+}
+
+
+#define MEMEqualMemory(Destination,Source,Length)   (!memcmp((Destination),(Source),(Length)))
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+
+
+
+
+#endif // __UMEM_H__
+
+
diff --git a/drivers/staging/vt6655/upc.h b/drivers/staging/vt6655/upc.h
new file mode 100644
index 00000000000..113fc2c88c1
--- /dev/null
+++ b/drivers/staging/vt6655/upc.h
@@ -0,0 +1,171 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: upc.h
+ *
+ * Purpose: Macros to access device
+ *
+ * Author: Tevin Chen
+ *
+ * Date: Mar 17, 1997
+ *
+ */
+
+
+#ifndef __UPC_H__
+#define __UPC_H__
+
+#if !defined(DEVICE_H)
+#include "device.h"
+#endif
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+
+/*---------------------  Export Definitions -------------------------*/
+
+
+//
+//  For IO mapped
+//
+
+#ifdef IO_MAP
+
+#define VNSvInPortB(dwIOAddress, pbyData) {                     \
+	*(pbyData) = inb(dwIOAddress);                              \
+}
+
+
+#define VNSvInPortW(dwIOAddress, pwData) {                      \
+	    *(pwData) = inw(dwIOAddress);                           \
+}
+
+#define VNSvInPortD(dwIOAddress, pdwData) {                     \
+	    *(pdwData) = inl(dwIOAddress);                          \
+}
+
+
+#define VNSvOutPortB(dwIOAddress, byData) {                     \
+        outb(byData, dwIOAddress);                              \
+}
+
+
+#define VNSvOutPortW(dwIOAddress, wData) {                      \
+        outw(wData, dwIOAddress);                               \
+}
+
+#define VNSvOutPortD(dwIOAddress, dwData) {                     \
+        outl(dwData, dwIOAddress);                              \
+}
+
+#else
+
+//
+//  For memory mapped IO
+//
+
+
+#define VNSvInPortB(dwIOAddress, pbyData) {                     \
+	volatile BYTE* pbyAddr = ((PBYTE)(dwIOAddress));            \
+	*(pbyData) = readb(pbyAddr);                           \
+}
+
+
+#define VNSvInPortW(dwIOAddress, pwData) {                      \
+	volatile WORD* pwAddr = ((PWORD)(dwIOAddress));             \
+	*(pwData) = readw(pwAddr);                             \
+}
+
+#define VNSvInPortD(dwIOAddress, pdwData) {                     \
+	volatile DWORD* pdwAddr = ((PDWORD)(dwIOAddress));          \
+	*(pdwData) = readl(pdwAddr);                           \
+}
+
+
+#define VNSvOutPortB(dwIOAddress, byData) {                     \
+    volatile BYTE* pbyAddr = ((PBYTE)(dwIOAddress));            \
+    writeb((BYTE)byData, pbyAddr);							\
+}
+
+
+#define VNSvOutPortW(dwIOAddress, wData) {                      \
+    volatile WORD* pwAddr = ((PWORD)(dwIOAddress));             \
+    writew((WORD)wData, pwAddr);							\
+}
+
+#define VNSvOutPortD(dwIOAddress, dwData) {                     \
+    volatile DWORD* pdwAddr = ((PDWORD)(dwIOAddress));          \
+    writel((DWORD)dwData, pdwAddr);					    \
+}
+
+#endif
+
+
+//
+// ALWAYS IO-Mapped IO when in 16-bit/32-bit environment
+//
+#define PCBvInPortB(dwIOAddress, pbyData) {     \
+	    *(pbyData) = inb(dwIOAddress);          \
+}
+
+#define PCBvInPortW(dwIOAddress, pwData) {      \
+	    *(pwData) = inw(dwIOAddress);           \
+}
+
+#define PCBvInPortD(dwIOAddress, pdwData) {     \
+	    *(pdwData) = inl(dwIOAddress);          \
+}
+
+#define PCBvOutPortB(dwIOAddress, byData) {     \
+        outb(byData, dwIOAddress);              \
+}
+
+#define PCBvOutPortW(dwIOAddress, wData) {      \
+        outw(wData, dwIOAddress);               \
+}
+
+#define PCBvOutPortD(dwIOAddress, dwData) {     \
+        outl(dwData, dwIOAddress);              \
+}
+
+
+#define PCAvDelayByIO(uDelayUnit) {             \
+    BYTE    byData;                             \
+    ULONG   ii;                                 \
+                                                \
+    if (uDelayUnit <= 50) {                     \
+        udelay(uDelayUnit);                     \
+    }                                           \
+    else {                                      \
+        for (ii = 0; ii < (uDelayUnit); ii++)   \
+		     byData = inb(0x61);				\
+    }                                           \
+}
+
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+
+
+
+
+#endif // __UPC_H__
+
diff --git a/drivers/staging/vt6655/vntconfiguration.dat b/drivers/staging/vt6655/vntconfiguration.dat
new file mode 100644
index 00000000000..0064ddce7c1
--- /dev/null
+++ b/drivers/staging/vt6655/vntconfiguration.dat
@@ -0,0 +1 @@
+ZONETYPE=EUROPE
\ No newline at end of file
diff --git a/drivers/staging/vt6655/vntwifi.c b/drivers/staging/vt6655/vntwifi.c
new file mode 100644
index 00000000000..58a1ba0eac0
--- /dev/null
+++ b/drivers/staging/vt6655/vntwifi.c
@@ -0,0 +1,832 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: vntwifi.c
+ *
+ * Purpose: export functions for vntwifi lib
+ *
+ * Functions:
+ *
+ * Revision History:
+ *
+ * Author: Yiching Chen
+ *
+ * Date: feb. 2, 2005
+ *
+ */
+
+#if !defined(__VNTWIFI_H__)
+#include "vntwifi.h"
+#endif
+#if !defined(__UMEM_H__)
+#include "umem.h"
+#endif
+
+
+#if !defined(__TBIT_H__)
+#include "tbit.h"
+#endif
+#if !defined(__IEEE11h_H__)
+#include "IEEE11h.h"
+#endif
+#if !defined(__COUNTRY_H__)
+#include "country.h"
+#endif
+#if !defined(__DEVICE_H__)
+#include "device.h"
+#endif
+#if !defined(__WMGR_H__)
+#include "wmgr.h"
+#endif
+#if !defined(__DATARATE_H__)
+#include "datarate.h"
+#endif
+//#define	PLICE_DEBUG
+
+/*---------------------  Static Definitions -------------------------*/
+//static int          msglevel                =MSG_LEVEL_DEBUG;
+//static int          msglevel                =MSG_LEVEL_INFO;
+
+/*---------------------  Static Classes  ----------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+
+/*---------------------  Static Functions  --------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+
+/*+
+ *
+ * Description:
+ *    Set Operation Mode
+ *
+ * Parameters:
+ *  In:
+ *      pMgmtHandle - pointer to management object
+ *      eOPMode     - Opreation Mode
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+-*/
+VOID
+VNTWIFIvSetOPMode (
+    IN PVOID pMgmtHandle,
+    IN WMAC_CONFIG_MODE eOPMode
+    )
+{
+    PSMgmtObject        pMgmt = (PSMgmtObject)pMgmtHandle;
+
+    pMgmt->eConfigMode = eOPMode;
+}
+
+
+/*+
+ *
+ * Description:
+ *    Set Operation Mode
+ *
+ * Parameters:
+ *  In:
+ *      pMgmtHandle - pointer to management object
+ *      wBeaconPeriod - Beacon Period
+ *      wATIMWindow - ATIM window
+ *      uChannel - channel number
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+-*/
+VOID
+VNTWIFIvSetIBSSParameter (
+    IN PVOID pMgmtHandle,
+    IN WORD  wBeaconPeriod,
+    IN WORD  wATIMWindow,
+    IN UINT  uChannel
+    )
+{
+    PSMgmtObject        pMgmt = (PSMgmtObject)pMgmtHandle;
+
+    pMgmt->wIBSSBeaconPeriod = wBeaconPeriod;
+    pMgmt->wIBSSATIMWindow = wATIMWindow;
+    pMgmt->uIBSSChannel = uChannel;
+}
+
+/*+
+ *
+ * Description:
+ *    Get current SSID
+ *
+ * Parameters:
+ *  In:
+ *      pMgmtHandle - pointer to management object
+ *  Out:
+ *      none
+ *
+ * Return Value: current SSID pointer.
+ *
+-*/
+PWLAN_IE_SSID
+VNTWIFIpGetCurrentSSID (
+    IN PVOID pMgmtHandle
+    )
+{
+    PSMgmtObject        pMgmt = (PSMgmtObject)pMgmtHandle;
+    return((PWLAN_IE_SSID) pMgmt->abyCurrSSID);
+}
+
+/*+
+ *
+ * Description:
+ *    Get current link channel
+ *
+ * Parameters:
+ *  In:
+ *      pMgmtHandle - pointer to management object
+ *  Out:
+ *      none
+ *
+ * Return Value: current Channel.
+ *
+-*/
+UINT
+VNTWIFIpGetCurrentChannel (
+    IN PVOID pMgmtHandle
+    )
+{
+    PSMgmtObject        pMgmt = (PSMgmtObject)pMgmtHandle;
+    if (pMgmtHandle != NULL) {
+        return (pMgmt->uCurrChannel);
+    }
+    return 0;
+}
+
+/*+
+ *
+ * Description:
+ *    Get current Assoc ID
+ *
+ * Parameters:
+ *  In:
+ *      pMgmtHandle - pointer to management object
+ *  Out:
+ *      none
+ *
+ * Return Value: current Assoc ID
+ *
+-*/
+WORD
+VNTWIFIwGetAssocID (
+    IN PVOID pMgmtHandle
+    )
+{
+    PSMgmtObject        pMgmt = (PSMgmtObject)pMgmtHandle;
+    return(pMgmt->wCurrAID);
+}
+
+
+
+/*+
+ *
+ * Description:
+ *    This routine return max support rate of IES
+ *
+ * Parameters:
+ *  In:
+ *      pSupportRateIEs
+ *      pExtSupportRateIEs
+ *
+ *  Out:
+ *
+ * Return Value: max support rate
+ *
+-*/
+BYTE
+VNTWIFIbyGetMaxSupportRate (
+    IN PWLAN_IE_SUPP_RATES pSupportRateIEs,
+    IN PWLAN_IE_SUPP_RATES pExtSupportRateIEs
+    )
+{
+    BYTE    byMaxSupportRate = RATE_1M;
+    BYTE    bySupportRate = RATE_1M;
+    UINT    ii = 0;
+
+    if (pSupportRateIEs) {
+        for (ii = 0; ii < pSupportRateIEs->len; ii++) {
+            bySupportRate = DATARATEbyGetRateIdx(pSupportRateIEs->abyRates[ii]);
+            if (bySupportRate > byMaxSupportRate) {
+                byMaxSupportRate = bySupportRate;
+            }
+        }
+    }
+    if (pExtSupportRateIEs) {
+        for (ii = 0; ii < pExtSupportRateIEs->len; ii++) {
+            bySupportRate = DATARATEbyGetRateIdx(pExtSupportRateIEs->abyRates[ii]);
+            if (bySupportRate > byMaxSupportRate) {
+                byMaxSupportRate = bySupportRate;
+            }
+        }
+    }
+
+    return byMaxSupportRate;
+}
+
+/*+
+ *
+ * Description:
+ *    This routine return data rate of ACK packtet
+ *
+ * Parameters:
+ *  In:
+ *      byRxDataRate
+ *      pSupportRateIEs
+ *      pExtSupportRateIEs
+ *
+ *  Out:
+ *
+ * Return Value: max support rate
+ *
+-*/
+BYTE
+VNTWIFIbyGetACKTxRate (
+    IN BYTE byRxDataRate,
+    IN PWLAN_IE_SUPP_RATES pSupportRateIEs,
+    IN PWLAN_IE_SUPP_RATES pExtSupportRateIEs
+    )
+{
+    BYTE    byMaxAckRate;
+    BYTE    byBasicRate;
+    UINT    ii;
+
+    if (byRxDataRate <= RATE_11M) {
+        byMaxAckRate = RATE_1M;
+    } else  {
+        // 24M is mandatory for 802.11a and 802.11g
+        byMaxAckRate = RATE_24M;
+    }
+    if (pSupportRateIEs) {
+        for (ii = 0; ii < pSupportRateIEs->len; ii++) {
+            if (pSupportRateIEs->abyRates[ii] & 0x80) {
+                byBasicRate = DATARATEbyGetRateIdx(pSupportRateIEs->abyRates[ii]);
+                if ((byBasicRate <= byRxDataRate) &&
+                    (byBasicRate > byMaxAckRate))  {
+                    byMaxAckRate = byBasicRate;
+                }
+            }
+        }
+    }
+    if (pExtSupportRateIEs) {
+        for (ii = 0; ii < pExtSupportRateIEs->len; ii++) {
+            if (pExtSupportRateIEs->abyRates[ii] & 0x80) {
+                byBasicRate = DATARATEbyGetRateIdx(pExtSupportRateIEs->abyRates[ii]);
+                if ((byBasicRate <= byRxDataRate) &&
+                    (byBasicRate > byMaxAckRate))  {
+                    byMaxAckRate = byBasicRate;
+                }
+            }
+        }
+    }
+
+    return byMaxAckRate;
+}
+
+/*+
+ *
+ * Description:
+ *    Set Authentication Mode
+ *
+ * Parameters:
+ *  In:
+ *      pMgmtHandle - pointer to management object
+ *      eAuthMode   - Authentication mode
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+-*/
+VOID
+VNTWIFIvSetAuthenticationMode (
+    IN PVOID pMgmtHandle,
+    IN WMAC_AUTHENTICATION_MODE eAuthMode
+    )
+{
+    PSMgmtObject        pMgmt = (PSMgmtObject)pMgmtHandle;
+
+    pMgmt->eAuthenMode = eAuthMode;
+    if ((eAuthMode == WMAC_AUTH_SHAREKEY) ||
+        (eAuthMode == WMAC_AUTH_AUTO)) {
+        pMgmt->bShareKeyAlgorithm = TRUE;
+    } else {
+        pMgmt->bShareKeyAlgorithm = FALSE;
+    }
+}
+
+/*+
+ *
+ * Description:
+ *    Set Encryption Mode
+ *
+ * Parameters:
+ *  In:
+ *      pMgmtHandle - pointer to management object
+ *      eAuthMode   - Authentication mode
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+-*/
+VOID
+VNTWIFIvSetEncryptionMode (
+    IN PVOID pMgmtHandle,
+    IN WMAC_ENCRYPTION_MODE eEncryptionMode
+    )
+{
+    PSMgmtObject        pMgmt = (PSMgmtObject)pMgmtHandle;
+
+    pMgmt->eEncryptionMode = eEncryptionMode;
+    if ((eEncryptionMode == WMAC_ENCRYPTION_WEPEnabled) ||
+        (eEncryptionMode == WMAC_ENCRYPTION_TKIPEnabled) ||
+        (eEncryptionMode == WMAC_ENCRYPTION_AESEnabled) ) {
+        pMgmt->bPrivacyInvoked = TRUE;
+    } else {
+        pMgmt->bPrivacyInvoked = FALSE;
+    }
+}
+
+
+
+BOOL
+VNTWIFIbConfigPhyMode (
+    IN PVOID pMgmtHandle,
+    IN CARD_PHY_TYPE ePhyType
+    )
+{
+    PSMgmtObject        pMgmt = (PSMgmtObject)pMgmtHandle;
+
+    if ((ePhyType != PHY_TYPE_AUTO) &&
+        (ePhyType != pMgmt->eCurrentPHYMode)) {
+        if (CARDbSetPhyParameter(pMgmt->pAdapter, ePhyType, 0, 0, NULL, NULL)==TRUE) {
+            pMgmt->eCurrentPHYMode = ePhyType;
+        } else {
+            return(FALSE);
+        }
+    }
+    pMgmt->eConfigPHYMode = ePhyType;
+    return(TRUE);
+}
+
+
+VOID
+VNTWIFIbGetConfigPhyMode (
+    IN  PVOID pMgmtHandle,
+    OUT PVOID pePhyType
+    )
+{
+    PSMgmtObject        pMgmt = (PSMgmtObject)pMgmtHandle;
+
+    if ((pMgmt != NULL) && (pePhyType != NULL)) {
+        *(PCARD_PHY_TYPE)pePhyType = pMgmt->eConfigPHYMode;
+    }
+}
+
+/*+
+ *
+ * Description:
+ *      Clear BSS List Database except current assoc BSS
+ *
+ * Parameters:
+ *  In:
+ *      pMgmtHandle     - Management Object structure
+ *      bLinkPass       - Current Link status
+ *  Out:
+ *
+ * Return Value: None.
+ *
+-*/
+
+
+/*+
+ *
+ * Description:
+ *      Query BSS List in management database
+ *
+ * Parameters:
+ *  In:
+ *      pMgmtHandle     - Management Object structure
+ *  Out:
+ *      puBSSCount      - BSS count
+ *      pvFirstBSS      - pointer to first BSS
+ *
+ * Return Value: None.
+ *
+-*/
+
+VOID
+VNTWIFIvQueryBSSList (
+    IN PVOID    pMgmtHandle,
+    OUT PUINT   puBSSCount,
+    OUT PVOID   *pvFirstBSS
+    )
+{
+    UINT            ii = 0;
+    PSMgmtObject    pMgmt = (PSMgmtObject)pMgmtHandle;
+    PKnownBSS       pBSS = NULL;
+    UINT            uCount = 0;
+
+    *pvFirstBSS = NULL;
+
+    for (ii = 0; ii < MAX_BSS_NUM; ii++) {
+        pBSS = &(pMgmt->sBSSList[ii]);
+        if (!pBSS->bActive) {
+            continue;
+        }
+        if (*pvFirstBSS == NULL) {
+            *pvFirstBSS = &(pMgmt->sBSSList[ii]);
+        }
+        uCount++;
+    }
+    *puBSSCount = uCount;
+}
+
+
+
+
+VOID
+VNTWIFIvGetNextBSS (
+    IN PVOID            pMgmtHandle,
+    IN PVOID            pvCurrentBSS,
+    OUT PVOID           *pvNextBSS
+    )
+{
+    PKnownBSS       pBSS = (PKnownBSS) pvCurrentBSS;
+    PSMgmtObject    pMgmt = (PSMgmtObject)pMgmtHandle;
+
+    *pvNextBSS = NULL;
+
+    while (*pvNextBSS == NULL) {
+        pBSS++;
+        if (pBSS > &(pMgmt->sBSSList[MAX_BSS_NUM])) {
+            return;
+        }
+        if (pBSS->bActive == TRUE) {
+            *pvNextBSS = pBSS;
+            return;
+        }
+    }
+}
+
+
+
+
+
+/*+
+ *
+ * Description:
+ *      Update Tx attemps, Tx failure counter in Node DB
+ *
+ *  In:
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+-*/
+VOID
+VNTWIFIvUpdateNodeTxCounter(
+    IN PVOID    pMgmtHandle,
+    IN PBYTE    pbyDestAddress,
+    IN BOOL     bTxOk,
+    IN WORD     wRate,
+    IN PBYTE    pbyTxFailCount
+    )
+{
+    PSMgmtObject    pMgmt = (PSMgmtObject)pMgmtHandle;
+    UINT            uNodeIndex = 0;
+    UINT            ii;
+
+    if ((pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) ||
+        (pMgmt->eCurrMode == WMAC_MODE_ESS_AP)) {
+        if (BSSDBbIsSTAInNodeDB(pMgmt, pbyDestAddress, &uNodeIndex) == FALSE) {
+            return;
+        }
+    }
+    pMgmt->sNodeDBTable[uNodeIndex].uTxAttempts++;
+    if (bTxOk == TRUE) {
+        // transmit success, TxAttempts at least plus one
+        pMgmt->sNodeDBTable[uNodeIndex].uTxOk[MAX_RATE]++;
+        pMgmt->sNodeDBTable[uNodeIndex].uTxOk[wRate]++;
+    } else {
+        pMgmt->sNodeDBTable[uNodeIndex].uTxFailures++;
+    }
+    pMgmt->sNodeDBTable[uNodeIndex].uTxRetry += pbyTxFailCount[MAX_RATE];
+    for(ii=0;ii<MAX_RATE;ii++) {
+        pMgmt->sNodeDBTable[uNodeIndex].uTxFail[ii] += pbyTxFailCount[ii];
+    }
+    return;
+}
+
+
+VOID
+VNTWIFIvGetTxRate(
+    IN PVOID    pMgmtHandle,
+    IN PBYTE    pbyDestAddress,
+    OUT PWORD   pwTxDataRate,
+    OUT PBYTE   pbyACKRate,
+    OUT PBYTE   pbyCCKBasicRate,
+    OUT PBYTE   pbyOFDMBasicRate
+    )
+{
+    PSMgmtObject        pMgmt = (PSMgmtObject)pMgmtHandle;
+    UINT                uNodeIndex = 0;
+    WORD                wTxDataRate = RATE_1M;
+    BYTE                byACKRate = RATE_1M;
+    BYTE                byCCKBasicRate = RATE_1M;
+    BYTE                byOFDMBasicRate = RATE_24M;
+    PWLAN_IE_SUPP_RATES pSupportRateIEs = NULL;
+    PWLAN_IE_SUPP_RATES pExtSupportRateIEs = NULL;
+
+
+    if ((pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) ||
+        (pMgmt->eCurrMode == WMAC_MODE_ESS_AP)) {
+        // Adhoc Tx rate decided from node DB
+        if(BSSDBbIsSTAInNodeDB(pMgmt, pbyDestAddress, &uNodeIndex)) {
+            wTxDataRate = (pMgmt->sNodeDBTable[uNodeIndex].wTxDataRate);
+            pSupportRateIEs = (PWLAN_IE_SUPP_RATES) (pMgmt->sNodeDBTable[uNodeIndex].abyCurrSuppRates);
+            pExtSupportRateIEs = (PWLAN_IE_SUPP_RATES) (pMgmt->sNodeDBTable[uNodeIndex].abyCurrExtSuppRates);
+        } else {
+            if (pMgmt->eCurrentPHYMode != PHY_TYPE_11A) {
+                wTxDataRate = RATE_2M;
+            } else {
+                wTxDataRate = RATE_24M;
+            }
+            pSupportRateIEs = (PWLAN_IE_SUPP_RATES) pMgmt->abyCurrSuppRates;
+            pExtSupportRateIEs = (PWLAN_IE_SUPP_RATES) pMgmt->abyCurrExtSuppRates;
+        }
+    } else { // Infrastructure: rate decided from AP Node, index = 0
+
+		wTxDataRate = (pMgmt->sNodeDBTable[0].wTxDataRate);
+#ifdef	PLICE_DEBUG
+		printk("GetTxRate:AP MAC is %02x:%02x:%02x:%02x:%02x:%02x,TxRate is %d\n",
+				pMgmt->sNodeDBTable[0].abyMACAddr[0],pMgmt->sNodeDBTable[0].abyMACAddr[1],
+				pMgmt->sNodeDBTable[0].abyMACAddr[2],pMgmt->sNodeDBTable[0].abyMACAddr[3],
+				pMgmt->sNodeDBTable[0].abyMACAddr[4],pMgmt->sNodeDBTable[0].abyMACAddr[5],wTxDataRate);
+#endif
+
+
+        pSupportRateIEs = (PWLAN_IE_SUPP_RATES) pMgmt->abyCurrSuppRates;
+        pExtSupportRateIEs = (PWLAN_IE_SUPP_RATES) pMgmt->abyCurrExtSuppRates;
+    }
+    byACKRate = VNTWIFIbyGetACKTxRate(  (BYTE) wTxDataRate,
+                                        pSupportRateIEs,
+                                        pExtSupportRateIEs
+                                        );
+    if (byACKRate > (BYTE) wTxDataRate) {
+        byACKRate = (BYTE) wTxDataRate;
+    }
+    byCCKBasicRate = VNTWIFIbyGetACKTxRate( RATE_11M,
+                                            pSupportRateIEs,
+                                            pExtSupportRateIEs
+                                            );
+    byOFDMBasicRate = VNTWIFIbyGetACKTxRate(RATE_54M,
+                                            pSupportRateIEs,
+                                            pExtSupportRateIEs
+                                            );
+    *pwTxDataRate = wTxDataRate;
+    *pbyACKRate = byACKRate;
+    *pbyCCKBasicRate = byCCKBasicRate;
+    *pbyOFDMBasicRate = byOFDMBasicRate;
+    return;
+}
+
+BYTE
+VNTWIFIbyGetKeyCypher(
+    IN PVOID    pMgmtHandle,
+    IN BOOL     bGroupKey
+    )
+{
+    PSMgmtObject    pMgmt = (PSMgmtObject)pMgmtHandle;
+
+    if (bGroupKey == TRUE) {
+        return (pMgmt->byCSSGK);
+    } else {
+        return (pMgmt->byCSSPK);
+    }
+}
+
+
+/*
+BOOL
+VNTWIFIbInit(
+    IN PVOID    pAdapterHandler,
+    OUT PVOID   *pMgmtHandler
+    )
+{
+
+    PSMgmtObject        pMgmt = NULL;
+    UINT                ii;
+
+
+    pMgmt = (PSMgmtObject)kmalloc(sizeof(SMgmtObject), (int)GFP_ATOMIC);
+    if (pMgmt == NULL) {
+        *pMgmtHandler = NULL;
+        return FALSE;
+    }
+
+    memset(pMgmt, 0, sizeof(SMgmtObject));
+    pMgmt->pAdapter = (PVOID) pAdapterHandler;
+
+    // should initial MAC address abyMACAddr
+    for(ii=0;ii<WLAN_BSSID_LEN;ii++) {
+        pMgmt->abyDesireBSSID[ii] = 0xFF;
+    }
+    pMgmt->pbyPSPacketPool = &pMgmt->byPSPacketPool[0];
+    pMgmt->pbyMgmtPacketPool = &pMgmt->byMgmtPacketPool[0];
+    pMgmt->byCSSPK = KEY_CTL_NONE;
+    pMgmt->byCSSGK = KEY_CTL_NONE;
+    pMgmt->wIBSSBeaconPeriod = DEFAULT_IBSS_BI;
+
+    pMgmt->cbFreeCmdQueue = CMD_Q_SIZE;
+    pMgmt->uCmdDequeueIdx = 0;
+    pMgmt->uCmdEnqueueIdx = 0;
+    pMgmt->eCommandState = WLAN_CMD_STATE_IDLE;
+    pMgmt->bCmdStop = FALSE;
+    pMgmt->bCmdRunning = FALSE;
+
+    *pMgmtHandler = pMgmt;
+    return TRUE;
+}
+*/
+
+
+
+BOOL
+VNTWIFIbSetPMKIDCache (
+    IN PVOID pMgmtObject,
+    IN ULONG ulCount,
+    IN PVOID pPMKIDInfo
+    )
+{
+    PSMgmtObject    pMgmt = (PSMgmtObject) pMgmtObject;
+
+    if (ulCount > MAX_PMKID_CACHE) {
+        return (FALSE);
+    }
+    pMgmt->gsPMKIDCache.BSSIDInfoCount = ulCount;
+    MEMvCopy(pMgmt->gsPMKIDCache.BSSIDInfo, pPMKIDInfo, (ulCount*sizeof(PMKIDInfo)));
+    return (TRUE);
+}
+
+
+
+WORD
+VNTWIFIwGetMaxSupportRate(
+    IN PVOID pMgmtObject
+    )
+{
+    WORD wRate = RATE_54M;
+    PSMgmtObject    pMgmt = (PSMgmtObject) pMgmtObject;
+
+    for(wRate = RATE_54M; wRate > RATE_1M; wRate--) {
+        if (BITbIsBitOn(pMgmt->sNodeDBTable[0].wSuppRate, (1<<wRate))) {
+            return (wRate);
+        }
+    }
+    if (pMgmt->eCurrentPHYMode == PHY_TYPE_11A) {
+        return (RATE_6M);
+    } else {
+        return (RATE_1M);
+    }
+}
+
+
+VOID
+VNTWIFIvSet11h (
+    IN PVOID pMgmtObject,
+    IN BOOL  b11hEnable
+    )
+{
+    PSMgmtObject    pMgmt = (PSMgmtObject) pMgmtObject;
+
+    pMgmt->b11hEnable = b11hEnable;
+}
+
+BOOL
+VNTWIFIbMeasureReport(
+    IN PVOID pMgmtObject,
+    IN BOOL  bEndOfReport,
+    IN PVOID pvMeasureEID,
+    IN BYTE  byReportMode,
+    IN BYTE  byBasicMap,
+    IN BYTE  byCCAFraction,
+    IN PBYTE pbyRPIs
+    )
+{
+    PSMgmtObject    pMgmt = (PSMgmtObject) pMgmtObject;
+    PBYTE           pbyCurrentEID = (PBYTE) (pMgmt->pCurrMeasureEIDRep);
+
+    //spin_lock_irq(&pDevice->lock);
+    if ((pvMeasureEID != NULL) &&
+        (pMgmt->uLengthOfRepEIDs < (WLAN_A3FR_MAXLEN - sizeof(MEASEURE_REP) - sizeof(WLAN_80211HDR_A3) - 3))
+        ) {
+        pMgmt->pCurrMeasureEIDRep->byElementID = WLAN_EID_MEASURE_REP;
+        pMgmt->pCurrMeasureEIDRep->len = 3;
+        pMgmt->pCurrMeasureEIDRep->byToken = ((PWLAN_IE_MEASURE_REQ) pvMeasureEID)->byToken;
+        pMgmt->pCurrMeasureEIDRep->byMode = byReportMode;
+        pMgmt->pCurrMeasureEIDRep->byType = ((PWLAN_IE_MEASURE_REQ) pvMeasureEID)->byType;
+        switch (pMgmt->pCurrMeasureEIDRep->byType) {
+            case MEASURE_TYPE_BASIC :
+                pMgmt->pCurrMeasureEIDRep->len += sizeof(MEASEURE_REP_BASIC);
+                MEMvCopy(   &(pMgmt->pCurrMeasureEIDRep->sRep.sBasic),
+                            &(((PWLAN_IE_MEASURE_REQ) pvMeasureEID)->sReq),
+                            sizeof(MEASEURE_REQ));
+                pMgmt->pCurrMeasureEIDRep->sRep.sBasic.byMap = byBasicMap;
+                break;
+            case MEASURE_TYPE_CCA :
+                pMgmt->pCurrMeasureEIDRep->len += sizeof(MEASEURE_REP_CCA);
+                MEMvCopy(   &(pMgmt->pCurrMeasureEIDRep->sRep.sCCA),
+                            &(((PWLAN_IE_MEASURE_REQ) pvMeasureEID)->sReq),
+                            sizeof(MEASEURE_REQ));
+                pMgmt->pCurrMeasureEIDRep->sRep.sCCA.byCCABusyFraction = byCCAFraction;
+                break;
+            case MEASURE_TYPE_RPI :
+                pMgmt->pCurrMeasureEIDRep->len += sizeof(MEASEURE_REP_RPI);
+                MEMvCopy(   &(pMgmt->pCurrMeasureEIDRep->sRep.sRPI),
+                            &(((PWLAN_IE_MEASURE_REQ) pvMeasureEID)->sReq),
+                            sizeof(MEASEURE_REQ));
+                MEMvCopy(pMgmt->pCurrMeasureEIDRep->sRep.sRPI.abyRPIdensity, pbyRPIs, 8);
+                break;
+            default :
+                break;
+        }
+        pbyCurrentEID += (2 + pMgmt->pCurrMeasureEIDRep->len);
+        pMgmt->uLengthOfRepEIDs += (2 + pMgmt->pCurrMeasureEIDRep->len);
+        pMgmt->pCurrMeasureEIDRep = (PWLAN_IE_MEASURE_REP) pbyCurrentEID;
+    }
+    if (bEndOfReport == TRUE) {
+        IEEE11hbMSRRepTx(pMgmt);
+    }
+    //spin_unlock_irq(&pDevice->lock);
+    return (TRUE);
+}
+
+
+BOOL
+VNTWIFIbChannelSwitch(
+    IN PVOID pMgmtObject,
+    IN BYTE  byNewChannel
+    )
+{
+    PSMgmtObject    pMgmt = (PSMgmtObject) pMgmtObject;
+
+    //spin_lock_irq(&pDevice->lock);
+    pMgmt->uCurrChannel = byNewChannel;
+    pMgmt->bSwitchChannel = FALSE;
+    //spin_unlock_irq(&pDevice->lock);
+    return TRUE;
+}
+
+/*
+BOOL
+VNTWIFIbRadarPresent(
+    IN PVOID pMgmtObject,
+    IN BYTE  byChannel
+    )
+{
+    PSMgmtObject    pMgmt = (PSMgmtObject) pMgmtObject;
+    if ((pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) &&
+        (byChannel == (BYTE) pMgmt->uCurrChannel) &&
+        (pMgmt->bSwitchChannel != TRUE) &&
+        (pMgmt->b11hEnable == TRUE)) {
+        if (IS_ETH_ADDRESS_EQUAL(pMgmt->abyIBSSDFSOwner, CARDpGetCurrentAddress(pMgmt->pAdapter))) {
+            pMgmt->byNewChannel = CARDbyAutoChannelSelect(pMgmt->pAdapter,(BYTE) pMgmt->uCurrChannel);
+            pMgmt->bSwitchChannel = TRUE;
+        }
+        BEACONbSendBeacon(pMgmt);
+        CARDbChannelSwitch(pMgmt->pAdapter, 0, pMgmt->byNewChannel, 10);
+    }
+    return TRUE;
+}
+*/
+
diff --git a/drivers/staging/vt6655/vntwifi.h b/drivers/staging/vt6655/vntwifi.h
new file mode 100644
index 00000000000..3e620a72621
--- /dev/null
+++ b/drivers/staging/vt6655/vntwifi.h
@@ -0,0 +1,330 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: vntwifi.h
+ *
+ * Purpose: export VNT Host WiFi library function
+ *
+ * Author: Yiching Chen
+ *
+ * Date: Jan 7, 2004
+ *
+ */
+
+#ifndef __VNTWIFI_H__
+#define __VNTWIFI_H__
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+#if !defined(__80211MGR_H__)
+#include "80211mgr.h"
+#endif
+#if !defined(__CARD_H__)
+#include "card.h"
+#endif
+
+/*---------------------  Export Definitions -------------------------*/
+#define RATE_1M         0
+#define RATE_2M         1
+#define RATE_5M         2
+#define RATE_11M        3
+#define RATE_6M         4
+#define RATE_9M         5
+#define RATE_12M        6
+#define RATE_18M        7
+#define RATE_24M        8
+#define RATE_36M        9
+#define RATE_48M       10
+#define RATE_54M       11
+#define RATE_AUTO      12
+#define MAX_RATE       12
+
+// key CipherSuite
+#define KEY_CTL_WEP         0x00
+#define KEY_CTL_NONE        0x01
+#define KEY_CTL_TKIP        0x02
+#define KEY_CTL_CCMP        0x03
+#define KEY_CTL_INVALID     0xFF
+
+#define CHANNEL_MAX_24G         14
+
+#define MAX_BSS_NUM             42
+
+#define MAX_PMKID_CACHE         16
+
+// Pre-configured Authenticaiton Mode (from XP)
+typedef enum tagWMAC_AUTHENTICATION_MODE {
+
+    WMAC_AUTH_OPEN,
+    WMAC_AUTH_SHAREKEY,
+    WMAC_AUTH_AUTO,
+    WMAC_AUTH_WPA,
+    WMAC_AUTH_WPAPSK,
+    WMAC_AUTH_WPANONE,
+    WMAC_AUTH_WPA2,
+    WMAC_AUTH_WPA2PSK,
+    WMAC_AUTH_MAX       // Not a real mode, defined as upper bound
+
+} WMAC_AUTHENTICATION_MODE, *PWMAC_AUTHENTICATION_MODE;
+
+typedef enum tagWMAC_ENCRYPTION_MODE {
+
+    WMAC_ENCRYPTION_WEPEnabled,
+    WMAC_ENCRYPTION_WEPDisabled,
+    WMAC_ENCRYPTION_WEPKeyAbsent,
+    WMAC_ENCRYPTION_WEPNotSupported,
+    WMAC_ENCRYPTION_TKIPEnabled,
+    WMAC_ENCRYPTION_TKIPKeyAbsent,
+    WMAC_ENCRYPTION_AESEnabled,
+    WMAC_ENCRYPTION_AESKeyAbsent
+
+} WMAC_ENCRYPTION_MODE, *PWMAC_ENCRYPTION_MODE;
+
+// Pre-configured Mode (from XP)
+
+typedef enum tagWMAC_CONFIG_MODE {
+
+    WMAC_CONFIG_ESS_STA = 0,
+    WMAC_CONFIG_IBSS_STA,
+    WMAC_CONFIG_AUTO,
+    WMAC_CONFIG_AP
+
+} WMAC_CONFIG_MODE, *PWMAC_CONFIG_MODE;
+
+
+
+typedef enum tagWMAC_POWER_MODE {
+
+    WMAC_POWER_CAM,
+    WMAC_POWER_FAST,
+    WMAC_POWER_MAX
+
+} WMAC_POWER_MODE, *PWMAC_POWER_MODE;
+
+#define VNTWIFIbIsShortSlotTime(wCapInfo)               \
+        WLAN_GET_CAP_INFO_SHORTSLOTTIME(wCapInfo)       \
+
+#define VNTWIFIbIsProtectMode(byERP)                    \
+        ((byERP & WLAN_EID_ERP_USE_PROTECTION) != 0)    \
+
+#define VNTWIFIbIsBarkerMode(byERP)                     \
+        ((byERP & WLAN_EID_ERP_BARKER_MODE) != 0)       \
+
+#define VNTWIFIbIsShortPreamble(wCapInfo)               \
+        WLAN_GET_CAP_INFO_SHORTPREAMBLE(wCapInfo)       \
+
+#define VNTWIFIbIsEncryption(wCapInfo)                  \
+        WLAN_GET_CAP_INFO_PRIVACY(wCapInfo)             \
+
+#define VNTWIFIbIsESS(wCapInfo)                         \
+        WLAN_GET_CAP_INFO_ESS(wCapInfo)                 \
+
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+
+/*---------------------  Export Types  ------------------------------*/
+
+
+/*---------------------  Export Functions  --------------------------*/
+
+#ifdef __cplusplus
+extern "C" {                            /* Assume C declarations for C++ */
+#endif /* __cplusplus */
+
+
+VOID
+VNTWIFIvSetIBSSParameter (
+    IN PVOID pMgmtHandle,
+    IN WORD  wBeaconPeriod,
+    IN WORD  wATIMWindow,
+    IN UINT  uChannel
+    );
+
+VOID
+VNTWIFIvSetOPMode (
+    IN PVOID pMgmtHandle,
+    IN WMAC_CONFIG_MODE eOPMode
+    );
+
+PWLAN_IE_SSID
+VNTWIFIpGetCurrentSSID(
+    IN PVOID pMgmtHandle
+    );
+
+UINT
+VNTWIFIpGetCurrentChannel(
+    IN PVOID pMgmtHandle
+    );
+
+WORD
+VNTWIFIwGetAssocID (
+    IN PVOID pMgmtHandle
+    );
+
+BYTE
+VNTWIFIbyGetMaxSupportRate (
+    IN PWLAN_IE_SUPP_RATES pSupportRateIEs,
+    IN PWLAN_IE_SUPP_RATES pExtSupportRateIEs
+    );
+
+BYTE
+VNTWIFIbyGetACKTxRate (
+    IN BYTE byRxDataRate,
+    IN PWLAN_IE_SUPP_RATES pSupportRateIEs,
+    IN PWLAN_IE_SUPP_RATES pExtSupportRateIEs
+    );
+
+VOID
+VNTWIFIvSetAuthenticationMode (
+    IN PVOID pMgmtHandle,
+    IN WMAC_AUTHENTICATION_MODE eAuthMode
+    );
+
+VOID
+VNTWIFIvSetEncryptionMode (
+    IN PVOID pMgmtHandle,
+    IN WMAC_ENCRYPTION_MODE eEncryptionMode
+    );
+
+
+BOOL
+VNTWIFIbConfigPhyMode(
+    IN PVOID pMgmtHandle,
+    IN CARD_PHY_TYPE ePhyType
+    );
+
+VOID
+VNTWIFIbGetConfigPhyMode(
+    IN  PVOID pMgmtHandle,
+    OUT PVOID pePhyType
+    );
+
+VOID
+VNTWIFIvQueryBSSList(
+    IN PVOID    pMgmtHandle,
+    OUT PUINT   puBSSCount,
+    OUT PVOID   *pvFirstBSS
+    );
+
+
+
+
+VOID
+VNTWIFIvGetNextBSS (
+    IN PVOID            pMgmtHandle,
+    IN PVOID            pvCurrentBSS,
+    OUT PVOID           *pvNextBSS
+    );
+
+
+
+VOID
+VNTWIFIvUpdateNodeTxCounter(
+    IN PVOID    pMgmtHandle,
+    IN PBYTE    pbyDestAddress,
+    IN BOOL     bTxOk,
+    IN WORD     wRate,
+    IN PBYTE    pbyTxFailCount
+    );
+
+
+VOID
+VNTWIFIvGetTxRate(
+    IN PVOID    pMgmtHandle,
+    IN PBYTE    pbyDestAddress,
+    OUT PWORD   pwTxDataRate,
+    OUT PBYTE   pbyACKRate,
+    OUT PBYTE   pbyCCKBasicRate,
+    OUT PBYTE   pbyOFDMBasicRate
+    );
+/*
+BOOL
+VNTWIFIbInit(
+    IN PVOID    pAdapterHandler,
+    OUT PVOID   *pMgmtHandler
+    );
+*/
+
+BYTE
+VNTWIFIbyGetKeyCypher(
+    IN PVOID    pMgmtHandle,
+    IN BOOL     bGroupKey
+    );
+
+
+
+
+BOOL
+VNTWIFIbSetPMKIDCache (
+    IN PVOID pMgmtObject,
+    IN ULONG ulCount,
+    IN PVOID pPMKIDInfo
+    );
+
+BOOL
+VNTWIFIbCommandRunning (
+    IN PVOID pMgmtObject
+    );
+
+WORD
+VNTWIFIwGetMaxSupportRate(
+    IN PVOID pMgmtObject
+    );
+
+// for 802.11h
+VOID
+VNTWIFIvSet11h (
+    IN PVOID pMgmtObject,
+    IN BOOL  b11hEnable
+    );
+
+BOOL
+VNTWIFIbMeasureReport(
+    IN PVOID pMgmtObject,
+    IN BOOL  bEndOfReport,
+    IN PVOID pvMeasureEID,
+    IN BYTE  byReportMode,
+    IN BYTE  byBasicMap,
+    IN BYTE  byCCAFraction,
+    IN PBYTE pbyRPIs
+    );
+
+BOOL
+VNTWIFIbChannelSwitch(
+    IN PVOID pMgmtObject,
+    IN BYTE  byNewChannel
+    );
+/*
+BOOL
+VNTWIFIbRadarPresent(
+    IN PVOID pMgmtObject,
+    IN BYTE  byChannel
+    );
+*/
+
+#ifdef __cplusplus
+}                                       /* End of extern "C" { */
+#endif /* __cplusplus */
+
+
+#endif //__VNTWIFI_H__
diff --git a/drivers/staging/vt6655/wcmd.c b/drivers/staging/vt6655/wcmd.c
new file mode 100644
index 00000000000..92563bd011b
--- /dev/null
+++ b/drivers/staging/vt6655/wcmd.c
@@ -0,0 +1,1178 @@
+ /*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: wcmd.c
+ *
+ * Purpose: Handles the management command interface functions
+ *
+ * Author: Lyndon Chen
+ *
+ * Date: May 8, 2003
+ *
+ * Functions:
+ *      s_vProbeChannel - Active scan channel
+ *      s_MgrMakeProbeRequest - Make ProbeRequest packet
+ *      CommandTimer - Timer function to handle command
+ *      s_bCommandComplete - Command Complete function
+ *      bScheduleCommand - Push Command and wait Command Scheduler to do
+ *      vCommandTimer- Command call back functions
+ *      vCommandTimerWait- Call back timer
+ *      bClearBSSID_SCAN- Clear BSSID_SCAN cmd in CMD Queue
+ *
+ * Revision History:
+ *
+ */
+
+
+
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+#if !defined(__TMACRO_H__)
+#include "tmacro.h"
+#endif
+#if !defined(__DEVICE_H__)
+#include "device.h"
+#endif
+#if !defined(__MAC_H__)
+#include "mac.h"
+#endif
+#if !defined(__CARD_H__)
+#include "card.h"
+#endif
+#if !defined(__80211HDR_H__)
+#include "80211hdr.h"
+#endif
+#if !defined(__WCMD_H__)
+#include "wcmd.h"
+#endif
+#if !defined(__WMGR_H__)
+#include "wmgr.h"
+#endif
+#if !defined(__POWER_H__)
+#include "power.h"
+#endif
+#if !defined(__WCTL_H__)
+#include "wctl.h"
+#endif
+#if !defined(__CARD_H__)
+#include "card.h"
+#endif
+#if !defined(__BASEBAND_H__)
+#include "baseband.h"
+#endif
+#if !defined(__UMEM_H__)
+#include "umem.h"
+#endif
+#if !defined(__RXTX_H__)
+#include "rxtx.h"
+#endif
+#if !defined(__RF_H__)
+#include "rf.h"
+#endif
+//DavidWang
+#if !defined(__IOWPA_H__)
+#include "iowpa.h"
+#endif
+
+/*---------------------  Static Definitions -------------------------*/
+
+
+
+
+/*---------------------  Static Classes  ----------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+static int          msglevel                =MSG_LEVEL_INFO;
+//static int          msglevel                =MSG_LEVEL_DEBUG;
+/*---------------------  Static Functions  --------------------------*/
+
+static
+VOID
+s_vProbeChannel(
+    IN PSDevice pDevice
+    );
+
+
+static
+PSTxMgmtPacket
+s_MgrMakeProbeRequest(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PBYTE pScanBSSID,
+    IN PWLAN_IE_SSID pSSID,
+    IN PWLAN_IE_SUPP_RATES pCurrRates,
+    IN PWLAN_IE_SUPP_RATES pCurrExtSuppRates
+    );
+
+static
+BOOL
+s_bCommandComplete (
+    PSDevice pDevice
+    );
+
+/*---------------------  Export Variables  --------------------------*/
+
+
+/*---------------------  Export Functions  --------------------------*/
+
+
+/*
+ * Description:
+ *      Stop AdHoc beacon during scan process
+ *
+ * Parameters:
+ *  In:
+ *      pDevice     - Pointer to the adapter
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+static
+void
+vAdHocBeaconStop(PSDevice  pDevice)
+{
+
+    PSMgmtObject    pMgmt = &(pDevice->sMgmtObj);
+    BOOL            bStop;
+
+    /*
+     * temporarily stop Beacon packet for AdHoc Server
+     * if all of the following coditions are met:
+     *  (1) STA is in AdHoc mode
+     *  (2) VT3253 is programmed as automatic Beacon Transmitting
+     *  (3) One of the following conditions is met
+     *      (3.1) AdHoc channel is in B/G band and the
+     *      current scan channel is in A band
+     *      or
+     *      (3.2) AdHoc channel is in A mode
+     */
+    bStop = FALSE;
+    if ((pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) &&
+    (pMgmt->eCurrState >= WMAC_STATE_STARTED))
+    {
+        if ((pMgmt->uIBSSChannel <=  CB_MAX_CHANNEL_24G) &&
+             (pMgmt->uScanChannel > CB_MAX_CHANNEL_24G))
+        {
+            bStop = TRUE;
+        }
+        if (pMgmt->uIBSSChannel >  CB_MAX_CHANNEL_24G)
+        {
+            bStop = TRUE;
+        }
+    }
+
+    if (bStop)
+    {
+        MACvRegBitsOff(pDevice->PortOffset, MAC_REG_TCR, TCR_AUTOBCNTX);
+    }
+
+}
+
+/*
+ * Description:
+ *      Restart AdHoc beacon after scan process complete
+ *
+ * Parameters:
+ *  In:
+ *      pDevice     - Pointer to the adapter
+ *  Out:
+ *      none
+ *
+ * Return Value: none
+ *
+ */
+static
+void
+vAdHocBeaconRestart(PSDevice pDevice)
+{
+    PSMgmtObject    pMgmt = &(pDevice->sMgmtObj);
+
+    /*
+     * Restart Beacon packet for AdHoc Server
+     * if all of the following coditions are met:
+     *  (1) STA is in AdHoc mode
+     *  (2) VT3253 is programmed as automatic Beacon Transmitting
+     */
+    if ((pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) &&
+    (pMgmt->eCurrState >= WMAC_STATE_STARTED))
+    {
+         MACvRegBitsOn(pDevice->PortOffset, MAC_REG_TCR, TCR_AUTOBCNTX);
+    }
+
+}
+
+
+
+
+/*+
+ *
+ * Routine Description:
+ *   Prepare and send probe request management frames.
+ *
+ *
+ * Return Value:
+ *    none.
+ *
+-*/
+
+static
+VOID
+s_vProbeChannel(
+    IN PSDevice pDevice
+    )
+{
+                                                     //1M,   2M,   5M,   11M,  18M,  24M,  36M,  54M
+    BYTE abyCurrSuppRatesG[] = {WLAN_EID_SUPP_RATES, 8, 0x02, 0x04, 0x0B, 0x16, 0x24, 0x30, 0x48, 0x6C};
+    BYTE abyCurrExtSuppRatesG[] = {WLAN_EID_EXTSUPP_RATES, 4, 0x0C, 0x12, 0x18, 0x60};
+                                                           //6M,   9M,   12M,  48M
+    BYTE abyCurrSuppRatesA[] = {WLAN_EID_SUPP_RATES, 8, 0x0C, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C};
+    BYTE abyCurrSuppRatesB[] = {WLAN_EID_SUPP_RATES, 4, 0x02, 0x04, 0x0B, 0x16};
+    PBYTE           pbyRate;
+    PSTxMgmtPacket  pTxPacket;
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+    UINT            ii;
+
+
+    if (pDevice->eCurrentPHYType == PHY_TYPE_11A) {
+        pbyRate = &abyCurrSuppRatesA[0];
+    } else if (pDevice->eCurrentPHYType == PHY_TYPE_11B) {
+        pbyRate = &abyCurrSuppRatesB[0];
+    } else {
+        pbyRate = &abyCurrSuppRatesG[0];
+    }
+    // build an assocreq frame and send it
+    pTxPacket = s_MgrMakeProbeRequest
+                (
+                  pDevice,
+                  pMgmt,
+                  pMgmt->abyScanBSSID,
+                  (PWLAN_IE_SSID)pMgmt->abyScanSSID,
+                  (PWLAN_IE_SUPP_RATES)pbyRate,
+                  (PWLAN_IE_SUPP_RATES)abyCurrExtSuppRatesG
+                );
+
+    if (pTxPacket != NULL ){
+        for (ii = 0; ii < 2 ; ii++) {
+            if (csMgmt_xmit(pDevice, pTxPacket) != CMD_STATUS_PENDING) {
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Probe request sending fail.. \n");
+            }
+            else {
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Probe request is sending.. \n");
+            }
+        }
+    }
+
+}
+
+
+
+
+/*+
+ *
+ * Routine Description:
+ *  Constructs an probe request frame
+ *
+ *
+ * Return Value:
+ *    A ptr to Tx frame or NULL on allocation failue
+ *
+-*/
+
+
+PSTxMgmtPacket
+s_MgrMakeProbeRequest(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PBYTE pScanBSSID,
+    IN PWLAN_IE_SSID pSSID,
+    IN PWLAN_IE_SUPP_RATES pCurrRates,
+    IN PWLAN_IE_SUPP_RATES pCurrExtSuppRates
+
+    )
+{
+    PSTxMgmtPacket      pTxPacket = NULL;
+    WLAN_FR_PROBEREQ    sFrame;
+
+
+    pTxPacket = (PSTxMgmtPacket)pMgmt->pbyMgmtPacketPool;
+    memset(pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_PROBEREQ_FR_MAXLEN);
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+    sFrame.pBuf = (PBYTE)pTxPacket->p80211Header;
+    sFrame.len = WLAN_PROBEREQ_FR_MAXLEN;
+    vMgrEncodeProbeRequest(&sFrame);
+    sFrame.pHdr->sA3.wFrameCtl = cpu_to_le16(
+        (
+        WLAN_SET_FC_FTYPE(WLAN_TYPE_MGR) |
+        WLAN_SET_FC_FSTYPE(WLAN_FSTYPE_PROBEREQ)
+        ));
+    memcpy( sFrame.pHdr->sA3.abyAddr1, pScanBSSID, WLAN_ADDR_LEN);
+    memcpy( sFrame.pHdr->sA3.abyAddr2, pMgmt->abyMACAddr, WLAN_ADDR_LEN);
+    memcpy( sFrame.pHdr->sA3.abyAddr3, pScanBSSID, WLAN_BSSID_LEN);
+    // Copy the SSID, pSSID->len=0 indicate broadcast SSID
+    sFrame.pSSID = (PWLAN_IE_SSID)(sFrame.pBuf + sFrame.len);
+    sFrame.len += pSSID->len + WLAN_IEHDR_LEN;
+    memcpy(sFrame.pSSID, pSSID, pSSID->len + WLAN_IEHDR_LEN);
+    sFrame.pSuppRates = (PWLAN_IE_SUPP_RATES)(sFrame.pBuf + sFrame.len);
+    sFrame.len += pCurrRates->len + WLAN_IEHDR_LEN;
+    memcpy(sFrame.pSuppRates, pCurrRates, pCurrRates->len + WLAN_IEHDR_LEN);
+    // Copy the extension rate set
+    if (pDevice->eCurrentPHYType == PHY_TYPE_11G) {
+        sFrame.pExtSuppRates = (PWLAN_IE_SUPP_RATES)(sFrame.pBuf + sFrame.len);
+        sFrame.len += pCurrExtSuppRates->len + WLAN_IEHDR_LEN;
+        memcpy(sFrame.pExtSuppRates, pCurrExtSuppRates, pCurrExtSuppRates->len + WLAN_IEHDR_LEN);
+    }
+    pTxPacket->cbMPDULen = sFrame.len;
+    pTxPacket->cbPayloadLen = sFrame.len - WLAN_HDR_ADDR3_LEN;
+
+    return pTxPacket;
+}
+
+
+
+
+VOID
+vCommandTimerWait(
+    IN HANDLE    hDeviceContext,
+    IN UINT MSecond
+    )
+{
+    PSDevice        pDevice = (PSDevice)hDeviceContext;
+
+    init_timer(&pDevice->sTimerCommand);
+    pDevice->sTimerCommand.data = (ULONG)pDevice;
+    pDevice->sTimerCommand.function = (TimerFunction)vCommandTimer;
+    // RUN_AT :1 msec ~= (HZ/1024)
+    pDevice->sTimerCommand.expires = (UINT)RUN_AT((MSecond * HZ) >> 10);
+    add_timer(&pDevice->sTimerCommand);
+    return;
+}
+
+
+
+VOID
+vCommandTimer (
+    IN  HANDLE      hDeviceContext
+    )
+{
+    PSDevice        pDevice = (PSDevice)hDeviceContext;
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+    PWLAN_IE_SSID   pItemSSID;
+    PWLAN_IE_SSID   pItemSSIDCurr;
+    CMD_STATUS      Status;
+    UINT            ii;
+    BYTE            byMask[8] = {1, 2, 4, 8, 0x10, 0x20, 0x40, 0x80};
+    struct sk_buff  *skb;
+
+
+    if (pDevice->dwDiagRefCount != 0)
+        return;
+    if (pDevice->bCmdRunning != TRUE)
+        return;
+
+    spin_lock_irq(&pDevice->lock);
+
+    switch ( pDevice->eCommandState ) {
+
+        case WLAN_CMD_SCAN_START:
+
+	pDevice->byReAssocCount = 0;
+            if (pDevice->bRadioOff == TRUE) {
+                s_bCommandComplete(pDevice);
+                spin_unlock_irq(&pDevice->lock);
+                return;
+            }
+
+            if (pMgmt->eCurrMode == WMAC_MODE_ESS_AP) {
+                s_bCommandComplete(pDevice);
+                CARDbSetBSSID(pMgmt->pAdapter, pMgmt->abyCurrBSSID, OP_MODE_AP);
+                spin_unlock_irq(&pDevice->lock);
+                return;
+            }
+
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"eCommandState= WLAN_CMD_SCAN_START\n");
+            pItemSSID = (PWLAN_IE_SSID)pMgmt->abyScanSSID;
+            // wait all Data TD complete
+            if (pDevice->iTDUsed[TYPE_AC0DMA] != 0){
+                spin_unlock_irq(&pDevice->lock);
+                vCommandTimerWait((HANDLE)pDevice, 10);
+                return;
+            };
+
+            if (pMgmt->uScanChannel == 0 ) {
+                pMgmt->uScanChannel = pDevice->byMinChannel;
+                // Set Baseband to be more sensitive.
+
+            }
+            if (pMgmt->uScanChannel > pDevice->byMaxChannel) {
+                pMgmt->eScanState = WMAC_NO_SCANNING;
+
+                // Set Baseband's sensitivity back.
+                // Set channel back
+                CARDbSetChannel(pMgmt->pAdapter, pMgmt->uCurrChannel);
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Scanning, set back to channel: [%d]\n", pMgmt->uCurrChannel);
+                if (pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) {
+                    CARDbSetBSSID(pMgmt->pAdapter, pMgmt->abyCurrBSSID, OP_MODE_ADHOC);
+                } else {
+                    CARDbSetBSSID(pMgmt->pAdapter, pMgmt->abyCurrBSSID, OP_MODE_INFRASTRUCTURE);
+                }
+                vAdHocBeaconRestart(pDevice);
+                s_bCommandComplete(pDevice);
+
+            } else {
+//2008-8-4 <add> by chester
+                 if (!ChannelValid(pDevice->byZoneType, pMgmt->uScanChannel)) {
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Invalid channel pMgmt->uScanChannel = %d \n",pMgmt->uScanChannel);
+                    s_bCommandComplete(pDevice);
+                    return;
+                }
+//printk("chester-pMgmt->uScanChannel=%d,pDevice->byMaxChannel=%d\n",pMgmt->uScanChannel,pDevice->byMaxChannel);
+                if (pMgmt->uScanChannel == pDevice->byMinChannel) {
+                    //pMgmt->eScanType = WMAC_SCAN_ACTIVE;
+                    pMgmt->abyScanBSSID[0] = 0xFF;
+                    pMgmt->abyScanBSSID[1] = 0xFF;
+                    pMgmt->abyScanBSSID[2] = 0xFF;
+                    pMgmt->abyScanBSSID[3] = 0xFF;
+                    pMgmt->abyScanBSSID[4] = 0xFF;
+                    pMgmt->abyScanBSSID[5] = 0xFF;
+                    pItemSSID->byElementID = WLAN_EID_SSID;
+                    // clear bssid list
+                    // BSSvClearBSSList((HANDLE)pDevice, pDevice->bLinkPass);
+                    pMgmt->eScanState = WMAC_IS_SCANNING;
+
+                }
+
+                vAdHocBeaconStop(pDevice);
+
+                if (CARDbSetChannel(pMgmt->pAdapter, pMgmt->uScanChannel) == TRUE) {
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"SCAN Channel: %d\n", pMgmt->uScanChannel);
+                } else {
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"SET SCAN Channel Fail: %d\n", pMgmt->uScanChannel);
+                }
+                CARDbSetBSSID(pMgmt->pAdapter, pMgmt->abyCurrBSSID, OP_MODE_UNKNOWN);
+//	printk("chester-mxch=%d\n",pDevice->byMaxChannel);
+      //          printk("chester-ch=%d\n",pMgmt->uScanChannel);
+	pMgmt->uScanChannel++;
+//2008-8-4 <modify> by chester
+	 if (!ChannelValid(pDevice->byZoneType, pMgmt->uScanChannel) &&
+                        pMgmt->uScanChannel <= pDevice->byMaxChannel ){
+                    pMgmt->uScanChannel=pDevice->byMaxChannel+1;
+		 pMgmt->eCommandState = WLAN_CMD_SCAN_END;
+
+                }
+
+
+                if ((pMgmt->b11hEnable == FALSE) ||
+                    (pMgmt->uScanChannel < CB_MAX_CHANNEL_24G)) {
+                    s_vProbeChannel(pDevice);
+                    spin_unlock_irq(&pDevice->lock);
+                    vCommandTimerWait((HANDLE)pDevice, WCMD_ACTIVE_SCAN_TIME);
+                    return;
+                } else {
+                    spin_unlock_irq(&pDevice->lock);
+                    vCommandTimerWait((HANDLE)pDevice, WCMD_PASSIVE_SCAN_TIME);
+                    return;
+                }
+
+            }
+
+            break;
+
+        case WLAN_CMD_SCAN_END:
+
+            // Set Baseband's sensitivity back.
+            // Set channel back
+            CARDbSetChannel(pMgmt->pAdapter, pMgmt->uCurrChannel);
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Scanning, set back to channel: [%d]\n", pMgmt->uCurrChannel);
+            if (pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) {
+                CARDbSetBSSID(pMgmt->pAdapter, pMgmt->abyCurrBSSID, OP_MODE_ADHOC);
+            } else {
+                CARDbSetBSSID(pMgmt->pAdapter, pMgmt->abyCurrBSSID, OP_MODE_INFRASTRUCTURE);
+            }
+
+            pMgmt->eScanState = WMAC_NO_SCANNING;
+            vAdHocBeaconRestart(pDevice);
+//2008-0409-07, <Add> by Einsn Liu
+#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+	if(pMgmt->eScanType == WMAC_SCAN_PASSIVE)
+			{//send scan event to wpa_Supplicant
+				union iwreq_data wrqu;
+				memset(&wrqu, 0, sizeof(wrqu));
+				wireless_send_event(pDevice->dev, SIOCGIWSCAN, &wrqu, NULL);
+			}
+#endif
+            s_bCommandComplete(pDevice);
+            break;
+
+        case WLAN_CMD_DISASSOCIATE_START :
+	pDevice->byReAssocCount = 0;
+            if ((pMgmt->eCurrMode == WMAC_MODE_ESS_STA) &&
+                (pMgmt->eCurrState != WMAC_STATE_ASSOC)) {
+                s_bCommandComplete(pDevice);
+                spin_unlock_irq(&pDevice->lock);
+                return;
+            } else {
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Send Disassociation Packet..\n");
+                // reason = 8 : disassoc because sta has left
+                vMgrDisassocBeginSta((HANDLE)pDevice, pMgmt, pMgmt->abyCurrBSSID, (8), &Status);
+                pDevice->bLinkPass = FALSE;
+                // unlock command busy
+                pItemSSID = (PWLAN_IE_SSID)pMgmt->abyCurrSSID;
+                pItemSSID->len = 0;
+                memset(pItemSSID->abySSID, 0, WLAN_SSID_MAXLEN);
+                pMgmt->eCurrState = WMAC_STATE_IDLE;
+                pMgmt->sNodeDBTable[0].bActive = FALSE;
+//                pDevice->bBeaconBufReady = FALSE;
+            }
+            netif_stop_queue(pDevice->dev);
+            pDevice->eCommandState = WLAN_DISASSOCIATE_WAIT;
+            // wait all Control TD complete
+            if (pDevice->iTDUsed[TYPE_TXDMA0] != 0){
+                vCommandTimerWait((HANDLE)pDevice, 10);
+                spin_unlock_irq(&pDevice->lock);
+                return;
+            };
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" CARDbRadioPowerOff\n");
+	//2008-09-02  <mark>	by chester
+           // CARDbRadioPowerOff(pDevice);
+            s_bCommandComplete(pDevice);
+            break;
+
+        case WLAN_DISASSOCIATE_WAIT :
+            // wait all Control TD complete
+            if (pDevice->iTDUsed[TYPE_TXDMA0] != 0){
+                vCommandTimerWait((HANDLE)pDevice, 10);
+                spin_unlock_irq(&pDevice->lock);
+                return;
+            };
+//2008-09-02  <mark> by chester
+           // CARDbRadioPowerOff(pDevice);
+            s_bCommandComplete(pDevice);
+            break;
+
+        case WLAN_CMD_SSID_START:
+        	pDevice->byReAssocCount = 0;
+            if (pDevice->bRadioOff == TRUE) {
+                s_bCommandComplete(pDevice);
+                spin_unlock_irq(&pDevice->lock);
+                return;
+            }
+//printk("chester-currmode=%d\n",pMgmt->eCurrMode);
+printk("chester-abyDesireSSID=%s\n",((PWLAN_IE_SSID)pMgmt->abyDesireSSID)->abySSID);
+                     //memcpy(pMgmt->abyAdHocSSID,pMgmt->abyDesireSSID,
+                              //((PWLAN_IE_SSID)pMgmt->abyDesireSSID)->len + WLAN_IEHDR_LEN);
+            pItemSSID = (PWLAN_IE_SSID)pMgmt->abyDesireSSID;
+            pItemSSIDCurr = (PWLAN_IE_SSID)pMgmt->abyCurrSSID;
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" cmd: desire ssid = %s\n", pItemSSID->abySSID);
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" cmd: curr ssid = %s\n", pItemSSIDCurr->abySSID);
+
+            if (pMgmt->eCurrState == WMAC_STATE_ASSOC) {
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" Cmd pMgmt->eCurrState == WMAC_STATE_ASSOC\n");
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" pItemSSID->len =%d\n",pItemSSID->len);
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" pItemSSIDCurr->len = %d\n",pItemSSIDCurr->len);
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" desire ssid = %s\n", pItemSSID->abySSID);
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" curr ssid = %s\n", pItemSSIDCurr->abySSID);
+            }
+
+            if ((pMgmt->eCurrState == WMAC_STATE_ASSOC) ||
+                ((pMgmt->eCurrMode == WMAC_MODE_IBSS_STA)&& (pMgmt->eCurrState == WMAC_STATE_JOINTED))) {
+
+                if (pItemSSID->len == pItemSSIDCurr->len) {
+                    if (memcmp(pItemSSID->abySSID, pItemSSIDCurr->abySSID, pItemSSID->len) == 0) {
+                        s_bCommandComplete(pDevice);
+                        spin_unlock_irq(&pDevice->lock);
+                        return;
+                    }
+                }
+
+                netif_stop_queue(pDevice->dev);
+                pDevice->bLinkPass = FALSE;
+            }
+            // set initial state
+            pMgmt->eCurrState = WMAC_STATE_IDLE;
+            pMgmt->eCurrMode = WMAC_MODE_STANDBY;
+            PSvDisablePowerSaving((HANDLE)pDevice);
+            BSSvClearNodeDBTable(pDevice, 0);
+
+            vMgrJoinBSSBegin((HANDLE)pDevice, &Status);
+            // if Infra mode
+            if ((pMgmt->eCurrMode == WMAC_MODE_ESS_STA) && (pMgmt->eCurrState == WMAC_STATE_JOINTED)) {
+
+		// Call mgr to begin the deauthentication
+                // reason = (3) beacuse sta has left ESS
+                if (pMgmt->eCurrState>= WMAC_STATE_AUTH) {
+                    vMgrDeAuthenBeginSta((HANDLE)pDevice, pMgmt, pMgmt->abyCurrBSSID, (3), &Status);
+                }
+                // Call mgr to begin the authentication
+                vMgrAuthenBeginSta((HANDLE)pDevice, pMgmt, &Status);
+                if (Status == CMD_STATUS_SUCCESS) {
+		pDevice->byLinkWaitCount = 0;
+                    pDevice->eCommandState = WLAN_AUTHENTICATE_WAIT;
+                    vCommandTimerWait((HANDLE)pDevice, AUTHENTICATE_TIMEOUT);
+                    spin_unlock_irq(&pDevice->lock);
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" Set eCommandState = WLAN_AUTHENTICATE_WAIT\n");
+                    return;
+                }
+            }
+            // if Adhoc mode
+            else if (pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) {
+                if (pMgmt->eCurrState == WMAC_STATE_JOINTED) {
+                    if (netif_queue_stopped(pDevice->dev)){
+                        netif_wake_queue(pDevice->dev);
+                    }
+                    pDevice->bLinkPass = TRUE;
+
+                    pMgmt->sNodeDBTable[0].bActive = TRUE;
+                    pMgmt->sNodeDBTable[0].uInActiveCount = 0;
+                    bClearBSSID_SCAN(pDevice);
+                }
+                else {
+                    // start own IBSS
+                    vMgrCreateOwnIBSS((HANDLE)pDevice, &Status);
+                    if (Status != CMD_STATUS_SUCCESS){
+                        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " WLAN_CMD_IBSS_CREATE fail ! \n");
+                    };
+                    BSSvAddMulticastNode(pDevice);
+                }
+            }
+            // if SSID not found
+            else if (pMgmt->eCurrMode == WMAC_MODE_STANDBY) {
+                if (pMgmt->eConfigMode == WMAC_CONFIG_IBSS_STA ||
+                    pMgmt->eConfigMode == WMAC_CONFIG_AUTO) {
+                    // start own IBSS
+                    vMgrCreateOwnIBSS((HANDLE)pDevice, &Status);
+                    if (Status != CMD_STATUS_SUCCESS){
+                        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO" WLAN_CMD_IBSS_CREATE fail ! \n");
+                    };
+                    BSSvAddMulticastNode(pDevice);
+                    if (netif_queue_stopped(pDevice->dev)){
+                        netif_wake_queue(pDevice->dev);
+                    }
+                    pDevice->bLinkPass = TRUE;
+                }
+                else {
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Disconnect SSID none\n");
+		  #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+                    // if(pDevice->bWPASuppWextEnabled == TRUE)
+                        {
+                  	union iwreq_data  wrqu;
+                  	memset(&wrqu, 0, sizeof (wrqu));
+                          wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+                  	printk("wireless_send_event--->SIOCGIWAP(disassociated:vMgrJoinBSSBegin Fail !!)\n");
+                  	wireless_send_event(pDevice->dev, SIOCGIWAP, &wrqu, NULL);
+                       }
+                    #endif
+
+                }
+            }
+            s_bCommandComplete(pDevice);
+            break;
+
+        case WLAN_AUTHENTICATE_WAIT :
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"eCommandState == WLAN_AUTHENTICATE_WAIT\n");
+            if (pMgmt->eCurrState == WMAC_STATE_AUTH) {
+                // Call mgr to begin the association
+                	pDevice->byLinkWaitCount = 0;
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"eCurrState == WMAC_STATE_AUTH\n");
+                vMgrAssocBeginSta((HANDLE)pDevice, pMgmt, &Status);
+                if (Status == CMD_STATUS_SUCCESS) {
+		pDevice->byLinkWaitCount = 0;
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"eCommandState = WLAN_ASSOCIATE_WAIT\n");
+                    pDevice->eCommandState = WLAN_ASSOCIATE_WAIT;
+                    vCommandTimerWait((HANDLE)pDevice, ASSOCIATE_TIMEOUT);
+                    spin_unlock_irq(&pDevice->lock);
+                    return;
+                }
+            }
+
+	else if(pMgmt->eCurrState < WMAC_STATE_AUTHPENDING) {
+               printk("WLAN_AUTHENTICATE_WAIT:Authen Fail???\n");
+	   }
+	   else  if(pDevice->byLinkWaitCount <= 4){    //mike add:wait another 2 sec if authenticated_frame delay!
+                pDevice->byLinkWaitCount ++;
+	       printk("WLAN_AUTHENTICATE_WAIT:wait %d times!!\n",pDevice->byLinkWaitCount);
+	       spin_unlock_irq(&pDevice->lock);
+	       vCommandTimerWait((HANDLE)pDevice, AUTHENTICATE_TIMEOUT/2);
+	       return;
+	   }
+	          pDevice->byLinkWaitCount = 0;
+		 #if 0
+                     #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+                    // if(pDevice->bWPASuppWextEnabled == TRUE)
+                        {
+                  	union iwreq_data  wrqu;
+                  	memset(&wrqu, 0, sizeof (wrqu));
+                          wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+                  	printk("wireless_send_event--->SIOCGIWAP(disassociated:AUTHENTICATE_WAIT_timeout)\n");
+                  	wireless_send_event(pDevice->dev, SIOCGIWAP, &wrqu, NULL);
+                       }
+                    #endif
+	         #endif
+            s_bCommandComplete(pDevice);
+            break;
+
+        case WLAN_ASSOCIATE_WAIT :
+            if (pMgmt->eCurrState == WMAC_STATE_ASSOC) {
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"eCurrState == WMAC_STATE_ASSOC\n");
+                if (pDevice->ePSMode != WMAC_POWER_CAM) {
+                    PSvEnablePowerSaving((HANDLE)pDevice, pMgmt->wListenInterval);
+                }
+                if (pMgmt->eAuthenMode >= WMAC_AUTH_WPA) {
+                    KeybRemoveAllKey(&(pDevice->sKey), pDevice->abyBSSID, pDevice->PortOffset);
+                }
+                pDevice->bLinkPass = TRUE;
+                pDevice->byLinkWaitCount = 0;
+                pDevice->byReAssocCount = 0;
+                bClearBSSID_SCAN(pDevice);
+                if (pDevice->byFOETuning) {
+                    BBvSetFOE(pDevice->PortOffset);
+                    PSbSendNullPacket(pDevice);
+                }
+                if (netif_queue_stopped(pDevice->dev)){
+                    netif_wake_queue(pDevice->dev);
+                }
+	     #ifdef TxInSleep
+		 if(pDevice->IsTxDataTrigger != FALSE)   {    //TxDataTimer is not triggered at the first time
+                     // printk("Re-initial TxDataTimer****\n");
+		    del_timer(&pDevice->sTimerTxData);
+                      init_timer(&pDevice->sTimerTxData);
+                      pDevice->sTimerTxData.data = (ULONG)pDevice;
+                      pDevice->sTimerTxData.function = (TimerFunction)BSSvSecondTxData;
+                      pDevice->sTimerTxData.expires = RUN_AT(10*HZ);      //10s callback
+                      pDevice->fTxDataInSleep = FALSE;
+                      pDevice->nTxDataTimeCout = 0;
+		 }
+		 else {
+		   // printk("mike:-->First time triger TimerTxData InSleep\n");
+		 }
+		pDevice->IsTxDataTrigger = TRUE;
+                add_timer(&pDevice->sTimerTxData);
+             #endif
+            }
+		   else if(pMgmt->eCurrState < WMAC_STATE_ASSOCPENDING) {
+               printk("WLAN_ASSOCIATE_WAIT:Association Fail???\n");
+	   }
+	   else  if(pDevice->byLinkWaitCount <= 4){    //mike add:wait another 2 sec if associated_frame delay!
+                pDevice->byLinkWaitCount ++;
+	       printk("WLAN_ASSOCIATE_WAIT:wait %d times!!\n",pDevice->byLinkWaitCount);
+	       spin_unlock_irq(&pDevice->lock);
+	       vCommandTimerWait((HANDLE)pDevice, ASSOCIATE_TIMEOUT/2);
+	       return;
+	   }
+	          pDevice->byLinkWaitCount = 0;
+		#if 0
+                     #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+                    // if(pDevice->bWPASuppWextEnabled == TRUE)
+                        {
+                  	union iwreq_data  wrqu;
+                  	memset(&wrqu, 0, sizeof (wrqu));
+                          wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+                  	printk("wireless_send_event--->SIOCGIWAP(disassociated:ASSOCIATE_WAIT_timeout)\n");
+                  	wireless_send_event(pDevice->dev, SIOCGIWAP, &wrqu, NULL);
+                       }
+                    #endif
+		#endif
+
+            s_bCommandComplete(pDevice);
+            break;
+
+        case WLAN_CMD_AP_MODE_START :
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"eCommandState == WLAN_CMD_AP_MODE_START\n");
+
+            if (pMgmt->eConfigMode == WMAC_CONFIG_AP) {
+                del_timer(&pMgmt->sTimerSecondCallback);
+                pMgmt->eCurrState = WMAC_STATE_IDLE;
+                pMgmt->eCurrMode = WMAC_MODE_STANDBY;
+                pDevice->bLinkPass = FALSE;
+                if (pDevice->bEnableHostWEP == TRUE)
+                    BSSvClearNodeDBTable(pDevice, 1);
+                else
+                    BSSvClearNodeDBTable(pDevice, 0);
+                pDevice->uAssocCount = 0;
+                pMgmt->eCurrState = WMAC_STATE_IDLE;
+                pDevice->bFixRate = FALSE;
+
+                vMgrCreateOwnIBSS((HANDLE)pDevice, &Status);
+                if (Status != CMD_STATUS_SUCCESS){
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " vMgrCreateOwnIBSS fail ! \n");
+                };
+                // alway turn off unicast bit
+                MACvRegBitsOff(pDevice->PortOffset, MAC_REG_RCR, RCR_UNICAST);
+                pDevice->byRxMode &= ~RCR_UNICAST;
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "wcmd: rx_mode = %x\n", pDevice->byRxMode );
+                BSSvAddMulticastNode(pDevice);
+                if (netif_queue_stopped(pDevice->dev)){
+                    netif_wake_queue(pDevice->dev);
+                }
+                pDevice->bLinkPass = TRUE;
+                add_timer(&pMgmt->sTimerSecondCallback);
+            }
+            s_bCommandComplete(pDevice);
+            break;
+
+        case WLAN_CMD_TX_PSPACKET_START :
+            // DTIM Multicast tx
+            if (pMgmt->sNodeDBTable[0].bRxPSPoll) {
+                while ((skb = skb_dequeue(&pMgmt->sNodeDBTable[0].sTxPSQueue)) != NULL) {
+                    if (skb_queue_empty(&pMgmt->sNodeDBTable[0].sTxPSQueue)) {
+                        pMgmt->abyPSTxMap[0] &= ~byMask[0];
+                        pDevice->bMoreData = FALSE;
+                    }
+                    else {
+                        pDevice->bMoreData = TRUE;
+                    }
+                    if (!device_dma0_xmit(pDevice, skb, 0)) {
+                        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Multicast ps tx fail \n");
+                    }
+                    pMgmt->sNodeDBTable[0].wEnQueueCnt--;
+                }
+            };
+
+            // PS nodes tx
+            for (ii = 1; ii < (MAX_NODE_NUM + 1); ii++) {
+                if (pMgmt->sNodeDBTable[ii].bActive &&
+                    pMgmt->sNodeDBTable[ii].bRxPSPoll) {
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Index=%d Enqueu Cnt= %d\n",
+                               ii, pMgmt->sNodeDBTable[ii].wEnQueueCnt);
+                    while ((skb = skb_dequeue(&pMgmt->sNodeDBTable[ii].sTxPSQueue)) != NULL) {
+                        if (skb_queue_empty(&pMgmt->sNodeDBTable[ii].sTxPSQueue)) {
+                            // clear tx map
+                            pMgmt->abyPSTxMap[pMgmt->sNodeDBTable[ii].wAID >> 3] &=
+                                    ~byMask[pMgmt->sNodeDBTable[ii].wAID & 7];
+                            pDevice->bMoreData = FALSE;
+                        }
+                        else {
+                            pDevice->bMoreData = TRUE;
+                        }
+                        if (!device_dma0_xmit(pDevice, skb, ii)) {
+                            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "sta ps tx fail \n");
+                        }
+                        pMgmt->sNodeDBTable[ii].wEnQueueCnt--;
+                        // check if sta ps enable, wait next pspoll
+                        // if sta ps disable, send all pending buffers.
+                        if (pMgmt->sNodeDBTable[ii].bPSEnable)
+                            break;
+                    }
+                    if (skb_queue_empty(&pMgmt->sNodeDBTable[ii].sTxPSQueue)) {
+                        // clear tx map
+                        pMgmt->abyPSTxMap[pMgmt->sNodeDBTable[ii].wAID >> 3] &=
+                                    ~byMask[pMgmt->sNodeDBTable[ii].wAID & 7];
+                        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Index=%d PS queue clear \n", ii);
+                    }
+                    pMgmt->sNodeDBTable[ii].bRxPSPoll = FALSE;
+                }
+            }
+
+            s_bCommandComplete(pDevice);
+            break;
+
+
+        case WLAN_CMD_RADIO_START :
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"eCommandState == WLAN_CMD_RADIO_START\n");
+            if (pDevice->bRadioCmd == TRUE)
+                CARDbRadioPowerOn(pDevice);
+            else
+                CARDbRadioPowerOff(pDevice);
+
+            s_bCommandComplete(pDevice);
+            break;
+
+
+        case WLAN_CMD_CHECK_BBSENSITIVITY_CHANGE :
+            //DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"eCommandState == WLAN_CMD_CHECK_BBSENSITIVITY_START\n");
+            // wait all TD complete
+            if (pDevice->iTDUsed[TYPE_AC0DMA] != 0){
+                vCommandTimerWait((HANDLE)pDevice, 10);
+                spin_unlock_irq(&pDevice->lock);
+                return;
+            }
+            if (pDevice->iTDUsed[TYPE_TXDMA0] != 0){
+                vCommandTimerWait((HANDLE)pDevice, 10);
+                spin_unlock_irq(&pDevice->lock);
+                return;
+            }
+            pDevice->byBBVGACurrent = pDevice->byBBVGANew;
+            BBvSetVGAGainOffset(pDevice, pDevice->byBBVGACurrent);
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"SetVGAGainOffset %02X\n", pDevice->byBBVGACurrent);
+            s_bCommandComplete(pDevice);
+            break;
+
+        default :
+            s_bCommandComplete(pDevice);
+            break;
+
+    } //switch
+    spin_unlock_irq(&pDevice->lock);
+    return;
+
+}
+
+
+static
+BOOL
+s_bCommandComplete (
+    PSDevice pDevice
+    )
+{
+    PWLAN_IE_SSID pSSID;
+    BOOL          bRadioCmd = FALSE;
+    //WORD          wDeAuthenReason = 0;
+    BOOL          bForceSCAN = TRUE;
+    PSMgmtObject  pMgmt = pDevice->pMgmt;
+
+
+    pDevice->eCommandState = WLAN_CMD_IDLE;
+    if (pDevice->cbFreeCmdQueue == CMD_Q_SIZE) {
+        //Command Queue Empty
+        pDevice->bCmdRunning = FALSE;
+        return TRUE;
+    }
+    else {
+        pDevice->eCommand = pDevice->eCmdQueue[pDevice->uCmdDequeueIdx].eCmd;
+        pSSID = (PWLAN_IE_SSID)pDevice->eCmdQueue[pDevice->uCmdDequeueIdx].abyCmdDesireSSID;
+        bRadioCmd = pDevice->eCmdQueue[pDevice->uCmdDequeueIdx].bRadioCmd;
+        bForceSCAN = pDevice->eCmdQueue[pDevice->uCmdDequeueIdx].bForceSCAN;
+        ADD_ONE_WITH_WRAP_AROUND(pDevice->uCmdDequeueIdx, CMD_Q_SIZE);
+        pDevice->cbFreeCmdQueue++;
+        pDevice->bCmdRunning = TRUE;
+        switch ( pDevice->eCommand ) {
+            case WLAN_CMD_BSSID_SCAN:
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"eCommandState= WLAN_CMD_BSSID_SCAN\n");
+                pDevice->eCommandState = WLAN_CMD_SCAN_START;
+                pMgmt->uScanChannel = 0;
+                if (pSSID->len != 0) {
+                    MEMvCopy(pMgmt->abyScanSSID, pSSID, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
+                } else {
+                    memset(pMgmt->abyScanSSID, 0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
+                }
+/*
+                if ((bForceSCAN == FALSE) && (pDevice->bLinkPass == TRUE)) {
+                    if ((pSSID->len == ((PWLAN_IE_SSID)pMgmt->abyCurrSSID)->len) &&
+                        (MEMEqualMemory(pSSID->abySSID, ((PWLAN_IE_SSID)pMgmt->abyCurrSSID)->abySSID, pSSID->len))) {
+                        pDevice->eCommandState = WLAN_CMD_IDLE;
+                    }
+                }
+*/
+                break;
+            case WLAN_CMD_SSID:
+                pDevice->eCommandState = WLAN_CMD_SSID_START;
+                if (pSSID->len > WLAN_SSID_MAXLEN)
+                    pSSID->len = WLAN_SSID_MAXLEN;
+                if (pSSID->len != 0)
+                    MEMvCopy(pDevice->pMgmt->abyDesireSSID, pSSID, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"eCommandState= WLAN_CMD_SSID_START\n");
+                break;
+            case WLAN_CMD_DISASSOCIATE:
+                pDevice->eCommandState = WLAN_CMD_DISASSOCIATE_START;
+                break;
+            case WLAN_CMD_RX_PSPOLL:
+                pDevice->eCommandState = WLAN_CMD_TX_PSPACKET_START;
+                break;
+            case WLAN_CMD_RUN_AP:
+                pDevice->eCommandState = WLAN_CMD_AP_MODE_START;
+                break;
+            case WLAN_CMD_RADIO:
+                pDevice->eCommandState = WLAN_CMD_RADIO_START;
+                pDevice->bRadioCmd = bRadioCmd;
+                break;
+            case WLAN_CMD_CHANGE_BBSENSITIVITY:
+                pDevice->eCommandState = WLAN_CMD_CHECK_BBSENSITIVITY_CHANGE;
+                break;
+
+            default:
+                break;
+
+        }
+
+        vCommandTimerWait((HANDLE)pDevice, 0);
+    }
+
+    return TRUE;
+}
+
+
+
+BOOL bScheduleCommand (
+    IN HANDLE hDeviceContext,
+    IN CMD_CODE    eCommand,
+    IN PBYTE       pbyItem0
+    )
+{
+    PSDevice        pDevice = (PSDevice)hDeviceContext;
+
+
+    if (pDevice->cbFreeCmdQueue == 0) {
+        return (FALSE);
+    }
+    pDevice->eCmdQueue[pDevice->uCmdEnqueueIdx].eCmd = eCommand;
+    pDevice->eCmdQueue[pDevice->uCmdEnqueueIdx].bForceSCAN = TRUE;
+    memset(pDevice->eCmdQueue[pDevice->uCmdEnqueueIdx].abyCmdDesireSSID, 0 , WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
+
+    if (pbyItem0 != NULL) {
+        switch (eCommand) {
+
+            case WLAN_CMD_BSSID_SCAN:
+                MEMvCopy(pDevice->eCmdQueue[pDevice->uCmdEnqueueIdx].abyCmdDesireSSID,
+                         pbyItem0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
+                pDevice->eCmdQueue[pDevice->uCmdEnqueueIdx].bForceSCAN = FALSE;
+                break;
+
+            case WLAN_CMD_SSID:
+                MEMvCopy(pDevice->eCmdQueue[pDevice->uCmdEnqueueIdx].abyCmdDesireSSID,
+                         pbyItem0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
+                break;
+
+            case WLAN_CMD_DISASSOCIATE:
+                pDevice->eCmdQueue[pDevice->uCmdEnqueueIdx].bNeedRadioOFF = *((PBOOL)pbyItem0);
+                break;
+/*
+            case WLAN_CMD_DEAUTH:
+                pDevice->eCmdQueue[pDevice->uCmdEnqueueIdx].wDeAuthenReason = *((PWORD)pbyItem0);
+                break;
+*/
+
+            case WLAN_CMD_RX_PSPOLL:
+                break;
+
+            case WLAN_CMD_RADIO:
+                pDevice->eCmdQueue[pDevice->uCmdEnqueueIdx].bRadioCmd = *((PBOOL)pbyItem0);
+                break;
+
+            case WLAN_CMD_CHANGE_BBSENSITIVITY:
+                pDevice->eCommandState = WLAN_CMD_CHECK_BBSENSITIVITY_CHANGE;
+                break;
+
+            default:
+                break;
+        }
+    }
+
+    ADD_ONE_WITH_WRAP_AROUND(pDevice->uCmdEnqueueIdx, CMD_Q_SIZE);
+    pDevice->cbFreeCmdQueue--;
+
+    if (pDevice->bCmdRunning == FALSE) {
+        s_bCommandComplete(pDevice);
+    }
+    else {
+    }
+    return (TRUE);
+
+}
+
+/*
+ * Description:
+ *      Clear BSSID_SCAN cmd in CMD Queue
+ *
+ * Parameters:
+ *  In:
+ *      hDeviceContext  - Pointer to the adapter
+ *      eCommand        - Command
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if success; otherwise FALSE
+ *
+ */
+BOOL bClearBSSID_SCAN (
+    IN HANDLE hDeviceContext
+    )
+{
+    PSDevice        pDevice = (PSDevice)hDeviceContext;
+    UINT            uCmdDequeueIdx = pDevice->uCmdDequeueIdx;
+    UINT            ii;
+
+    if ((pDevice->cbFreeCmdQueue < CMD_Q_SIZE) && (uCmdDequeueIdx != pDevice->uCmdEnqueueIdx)) {
+        for (ii = 0; ii < (CMD_Q_SIZE - pDevice->cbFreeCmdQueue); ii ++) {
+            if (pDevice->eCmdQueue[uCmdDequeueIdx].eCmd == WLAN_CMD_BSSID_SCAN)
+                pDevice->eCmdQueue[uCmdDequeueIdx].eCmd = WLAN_CMD_IDLE;
+            ADD_ONE_WITH_WRAP_AROUND(uCmdDequeueIdx, CMD_Q_SIZE);
+            if (uCmdDequeueIdx == pDevice->uCmdEnqueueIdx)
+                break;
+        }
+    }
+    return TRUE;
+}
+
+//mike add:reset command timer
+VOID
+vResetCommandTimer(
+    IN HANDLE      hDeviceContext
+    )
+{
+  PSDevice        pDevice = (PSDevice)hDeviceContext;
+
+  //delete timer
+      del_timer(&pDevice->sTimerCommand);
+  //init timer
+      init_timer(&pDevice->sTimerCommand);
+    pDevice->sTimerCommand.data = (ULONG)pDevice;
+    pDevice->sTimerCommand.function = (TimerFunction)vCommandTimer;
+    pDevice->sTimerCommand.expires = RUN_AT(HZ);
+    pDevice->cbFreeCmdQueue = CMD_Q_SIZE;
+    pDevice->uCmdDequeueIdx = 0;
+    pDevice->uCmdEnqueueIdx = 0;
+    pDevice->eCommandState = WLAN_CMD_IDLE;
+    pDevice->bCmdRunning = FALSE;
+    pDevice->bCmdClear = FALSE;
+}
+
+
+#ifdef TxInSleep
+VOID
+BSSvSecondTxData(
+    IN  HANDLE      hDeviceContext
+    )
+{
+  PSDevice        pDevice = (PSDevice)hDeviceContext;
+  PSMgmtObject  pMgmt = &(pDevice->sMgmtObj);
+  pDevice->nTxDataTimeCout++;
+
+  if(pDevice->nTxDataTimeCout<4)     //don't tx data if timer less than 40s
+    {
+     // printk("mike:%s-->no data Tx not exceed the desired Time as %d\n",__FUNCTION__,
+	//  	(int)pDevice->nTxDataTimeCout);
+     pDevice->sTimerTxData.expires = RUN_AT(10*HZ);      //10s callback
+     add_timer(&pDevice->sTimerTxData);
+      return;
+    }
+
+  spin_lock_irq(&pDevice->lock);
+  #if 1
+  if(((pDevice->bLinkPass ==TRUE)&&(pMgmt->eAuthenMode < WMAC_AUTH_WPA)) ||  //open && sharekey linking
+      (pDevice->fWPA_Authened == TRUE)) {   //wpa linking
+ #else
+  if(pDevice->bLinkPass ==TRUE) {
+ #endif
+
+        //   printk("mike:%s-->InSleep Tx Data Procedure\n",__FUNCTION__);
+	  pDevice->fTxDataInSleep = TRUE;
+	  PSbSendNullPacket(pDevice);      //send null packet
+	  pDevice->fTxDataInSleep = FALSE;
+  	}
+  spin_unlock_irq(&pDevice->lock);
+
+  pDevice->sTimerTxData.expires = RUN_AT(10*HZ);      //10s callback
+  add_timer(&pDevice->sTimerTxData);
+  return;
+}
+#endif
+
diff --git a/drivers/staging/vt6655/wcmd.h b/drivers/staging/vt6655/wcmd.h
new file mode 100644
index 00000000000..8c6bbc49f0b
--- /dev/null
+++ b/drivers/staging/vt6655/wcmd.h
@@ -0,0 +1,151 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: wcmd.h
+ *
+ * Purpose: Handles the management command interface functions
+ *
+ * Author: Lyndon Chen
+ *
+ * Date: May 8, 2002
+ *
+ */
+
+#ifndef __WCMD_H__
+#define __WCMD_H__
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+#if !defined(__80211HDR_H__)
+#include "80211hdr.h"
+#endif
+#if !defined(__80211MGR_H__)
+#include "80211mgr.h"
+#endif
+
+/*---------------------  Export Definitions -------------------------*/
+
+
+
+#define AUTHENTICATE_TIMEOUT   1000 //ms
+#define ASSOCIATE_TIMEOUT      1000 //ms
+
+// Command code
+typedef enum tagCMD_CODE {
+    WLAN_CMD_BSSID_SCAN,
+    WLAN_CMD_SSID,
+    WLAN_CMD_DISASSOCIATE,
+    WLAN_CMD_DEAUTH,
+    WLAN_CMD_RX_PSPOLL,
+    WLAN_CMD_RADIO,
+    WLAN_CMD_CHANGE_BBSENSITIVITY,
+    WLAN_CMD_SETPOWER,
+    WLAN_CMD_TBTT_WAKEUP,
+    WLAN_CMD_BECON_SEND,
+    WLAN_CMD_CHANGE_ANTENNA,
+    WLAN_CMD_REMOVE_ALLKEY,
+    WLAN_CMD_MAC_DISPOWERSAVING,
+    WLAN_CMD_11H_CHSW,
+    WLAN_CMD_RUN_AP
+} CMD_CODE, DEF* PCMD_CODE;
+
+#define CMD_Q_SIZE              32
+
+
+// Command code
+typedef enum tagCMD_STATUS {
+
+    CMD_STATUS_SUCCESS,
+    CMD_STATUS_FAILURE,
+    CMD_STATUS_RESOURCES,
+    CMD_STATUS_TIMEOUT,
+    CMD_STATUS_PENDING
+
+} CMD_STATUS, DEF* PCMD_STATUS;
+
+
+typedef struct tagCMD_ITEM {
+    CMD_CODE eCmd;
+    BYTE     abyCmdDesireSSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
+    BOOL     bNeedRadioOFF;
+    WORD     wDeAuthenReason;
+    BOOL     bRadioCmd;
+    BOOL     bForceSCAN;
+} CMD_ITEM, DEF* PCMD_ITEM;
+
+// Command state
+typedef enum tagCMD_STATE {
+    WLAN_CMD_SCAN_START,
+    WLAN_CMD_SCAN_END,
+    WLAN_CMD_DISASSOCIATE_START,
+    WLAN_CMD_SSID_START,
+    WLAN_AUTHENTICATE_WAIT,
+    WLAN_ASSOCIATE_WAIT,
+    WLAN_DISASSOCIATE_WAIT,
+    WLAN_CMD_TX_PSPACKET_START,
+    WLAN_CMD_AP_MODE_START,
+    WLAN_CMD_RADIO_START,
+    WLAN_CMD_CHECK_BBSENSITIVITY_CHANGE,
+    WLAN_CMD_IDLE
+} CMD_STATE, DEF* PCMD_STATE;
+
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+
+/*---------------------  Export Types  ------------------------------*/
+
+
+/*---------------------  Export Functions  --------------------------*/
+
+VOID
+vResetCommandTimer(
+    IN HANDLE      hDeviceContext
+    );
+
+VOID
+vCommandTimer (
+    IN  HANDLE hDeviceContext
+    );
+
+BOOL bClearBSSID_SCAN(
+    IN HANDLE hDeviceContext
+    );
+
+BOOL
+bScheduleCommand(
+    IN HANDLE      hDeviceContext,
+    IN CMD_CODE    eCommand,
+    IN PBYTE       pbyItem0
+    );
+
+VOID
+vCommandTimerWait(
+    IN HANDLE      hDeviceContext,
+    IN UINT MSecond
+    );
+#ifdef TxInSleep
+VOID
+BSSvSecondTxData(
+    IN  HANDLE      hDeviceContext
+    );
+#endif
+#endif //__WCMD_H__
diff --git a/drivers/staging/vt6655/wctl.c b/drivers/staging/vt6655/wctl.c
new file mode 100644
index 00000000000..b4fecc2ed55
--- /dev/null
+++ b/drivers/staging/vt6655/wctl.c
@@ -0,0 +1,261 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: wctl.c
+ *
+ * Purpose: handle WMAC duplicate filter & defragment
+ *
+ * Author: Jerry Chen
+ *
+ * Date: Jun. 27, 2002
+ *
+ * Functions:
+ *      WCTLbIsDuplicate - Test if duplicate packet
+ *      WCTLuSearchDFCB - Search DeFragment Control Database
+ *      WCTLuInsertDFCB - Insert DeFragment Control Database
+ *      WCTLbHandleFragment - Handle received fragment packet
+ *
+ * Revision History:
+ *
+ */
+
+
+#if !defined(__WCTL_H__)
+#include "wctl.h"
+#endif
+#if !defined(__DEVICE_H__)
+#include "device.h"
+#endif
+#if !defined(__CARD_H__)
+#include "card.h"
+#endif
+
+/*---------------------  Static Definitions -------------------------*/
+
+/*---------------------  Static Classes  ----------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+// static int          msglevel                =MSG_LEVEL_INFO;
+/*---------------------  Static Functions  --------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+
+
+/*
+ * Description:
+ *      Scan Rx cache.  Return TRUE if packet is duplicate, else
+ *      inserts in receive cache and returns FALSE.
+ *
+ * Parameters:
+ *  In:
+ *      pCache      - Receive packets history
+ *      pMACHeader  - 802.11 MAC Header of received packet
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if packet duplicate; otherwise FALSE
+ *
+ */
+
+BOOL WCTLbIsDuplicate (PSCache pCache, PS802_11Header pMACHeader)
+{
+    UINT            uIndex;
+    UINT            ii;
+    PSCacheEntry    pCacheEntry;
+
+    if (IS_FC_RETRY(pMACHeader)) {
+
+        uIndex = pCache->uInPtr;
+        for (ii = 0; ii < DUPLICATE_RX_CACHE_LENGTH; ii++) {
+            pCacheEntry = &(pCache->asCacheEntry[uIndex]);
+            if ((pCacheEntry->wFmSequence == pMACHeader->wSeqCtl) &&
+                (IS_ETH_ADDRESS_EQUAL (&(pCacheEntry->abyAddr2[0]), &(pMACHeader->abyAddr2[0])))
+                ) {
+                /* Duplicate match */
+                return TRUE;
+            }
+            ADD_ONE_WITH_WRAP_AROUND(uIndex, DUPLICATE_RX_CACHE_LENGTH);
+        }
+    }
+    /* Not fount in cache - insert */
+    pCacheEntry = &pCache->asCacheEntry[pCache->uInPtr];
+    pCacheEntry->wFmSequence = pMACHeader->wSeqCtl;
+    memcpy(&(pCacheEntry->abyAddr2[0]), &(pMACHeader->abyAddr2[0]), U_ETHER_ADDR_LEN);
+    ADD_ONE_WITH_WRAP_AROUND(pCache->uInPtr, DUPLICATE_RX_CACHE_LENGTH);
+    return FALSE;
+}
+
+/*
+ * Description:
+ *      Found if sequence number of received fragment packet in Defragment Database
+ *
+ * Parameters:
+ *  In:
+ *      pDevice     - Pointer to adapter
+ *      pMACHeader  - 802.11 MAC Header of received packet
+ *  Out:
+ *      none
+ *
+ * Return Value: index number in Defragment Database
+ *
+ */
+UINT WCTLuSearchDFCB (PSDevice pDevice, PS802_11Header pMACHeader)
+{
+UINT ii;
+
+    for(ii=0;ii<pDevice->cbDFCB;ii++) {
+        if ((pDevice->sRxDFCB[ii].bInUse == TRUE) &&
+            (IS_ETH_ADDRESS_EQUAL (&(pDevice->sRxDFCB[ii].abyAddr2[0]), &(pMACHeader->abyAddr2[0])))
+            ) {
+            //
+            return(ii);
+        }
+    }
+    return(pDevice->cbDFCB);
+}
+
+
+/*
+ * Description:
+ *      Insert received fragment packet in Defragment Database
+ *
+ * Parameters:
+ *  In:
+ *      pDevice     - Pointer to adapter
+ *      pMACHeader  - 802.11 MAC Header of received packet
+ *  Out:
+ *      none
+ *
+ * Return Value: index number in Defragment Database
+ *
+ */
+UINT WCTLuInsertDFCB (PSDevice pDevice, PS802_11Header pMACHeader)
+{
+UINT ii;
+
+    if (pDevice->cbFreeDFCB == 0)
+        return(pDevice->cbDFCB);
+    for(ii=0;ii<pDevice->cbDFCB;ii++) {
+        if (pDevice->sRxDFCB[ii].bInUse == FALSE) {
+            pDevice->cbFreeDFCB--;
+            pDevice->sRxDFCB[ii].uLifetime = pDevice->dwMaxReceiveLifetime;
+            pDevice->sRxDFCB[ii].bInUse = TRUE;
+            pDevice->sRxDFCB[ii].wSequence = (pMACHeader->wSeqCtl >> 4);
+            pDevice->sRxDFCB[ii].wFragNum = (pMACHeader->wSeqCtl & 0x000F);
+            memcpy(&(pDevice->sRxDFCB[ii].abyAddr2[0]), &(pMACHeader->abyAddr2[0]), U_ETHER_ADDR_LEN);
+            return(ii);
+        }
+    }
+    return(pDevice->cbDFCB);
+}
+
+
+/*
+ * Description:
+ *      Handle received fragment packet
+ *
+ * Parameters:
+ *  In:
+ *      pDevice         - Pointer to adapter
+ *      pMACHeader      - 802.11 MAC Header of received packet
+ *      cbFrameLength   - Frame length
+ *      bWEP            - is WEP packet
+ *  Out:
+ *      none
+ *
+ * Return Value: TRUE if it is valid fragment packet and we have resource to defragment; otherwise FALSE
+ *
+ */
+BOOL WCTLbHandleFragment (PSDevice pDevice, PS802_11Header pMACHeader, UINT cbFrameLength, BOOL bWEP, BOOL bExtIV)
+{
+UINT            uHeaderSize;
+
+
+    if (bWEP == TRUE) {
+        uHeaderSize = 28;
+        if (bExtIV)
+        // ExtIV
+            uHeaderSize +=4;
+    }
+    else {
+        uHeaderSize = 24;
+    }
+
+    if (IS_FIRST_FRAGMENT_PKT(pMACHeader)) {
+        pDevice->uCurrentDFCBIdx = WCTLuSearchDFCB(pDevice, pMACHeader);
+        if (pDevice->uCurrentDFCBIdx < pDevice->cbDFCB) {
+            // duplicate, we must flush previous DCB
+            pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].uLifetime = pDevice->dwMaxReceiveLifetime;
+            pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].wSequence = (pMACHeader->wSeqCtl >> 4);
+            pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].wFragNum = (pMACHeader->wSeqCtl & 0x000F);
+        }
+        else {
+            pDevice->uCurrentDFCBIdx = WCTLuInsertDFCB(pDevice, pMACHeader);
+            if (pDevice->uCurrentDFCBIdx == pDevice->cbDFCB) {
+                return(FALSE);
+            }
+        }
+        // reserve 4 byte to match MAC RX Buffer
+#ifdef PRIVATE_OBJ
+        pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].pbyRxBuffer = (PBYTE) (pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].ref_skb.data + 4);
+#else
+        pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].pbyRxBuffer = (PBYTE) (pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].skb->data + 4);
+#endif
+        memcpy(pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].pbyRxBuffer, pMACHeader, cbFrameLength);
+        pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].cbFrameLength = cbFrameLength;
+        pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].pbyRxBuffer += cbFrameLength;
+        pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].wFragNum++;
+        //DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "First pDevice->uCurrentDFCBIdx= %d\n", pDevice->uCurrentDFCBIdx);
+        return(FALSE);
+    }
+    else {
+        pDevice->uCurrentDFCBIdx = WCTLuSearchDFCB(pDevice, pMACHeader);
+        if (pDevice->uCurrentDFCBIdx != pDevice->cbDFCB) {
+            if ((pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].wSequence == (pMACHeader->wSeqCtl >> 4)) &&
+                (pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].wFragNum == (pMACHeader->wSeqCtl & 0x000F)) &&
+                ((pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].cbFrameLength + cbFrameLength - uHeaderSize) < 2346)) {
+
+                memcpy(pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].pbyRxBuffer, ((PBYTE) (pMACHeader) + uHeaderSize), (cbFrameLength - uHeaderSize));
+                pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].cbFrameLength += (cbFrameLength - uHeaderSize);
+                pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].pbyRxBuffer += (cbFrameLength - uHeaderSize);
+                pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].wFragNum++;
+                //DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Second pDevice->uCurrentDFCBIdx= %d\n", pDevice->uCurrentDFCBIdx);
+            }
+            else {
+                // seq error or frag # error flush DFCB
+                pDevice->cbFreeDFCB++;
+                pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].bInUse = FALSE;
+                return(FALSE);
+            }
+        }
+        else {
+            return(FALSE);
+        }
+        if (IS_LAST_FRAGMENT_PKT(pMACHeader)) {
+            //enq defragcontrolblock
+            pDevice->cbFreeDFCB++;
+            pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].bInUse = FALSE;
+            //DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Last pDevice->uCurrentDFCBIdx= %d\n", pDevice->uCurrentDFCBIdx);
+            return(TRUE);
+        }
+        return(FALSE);
+    }
+}
+
+
diff --git a/drivers/staging/vt6655/wctl.h b/drivers/staging/vt6655/wctl.h
new file mode 100644
index 00000000000..f75ca59f6c6
--- /dev/null
+++ b/drivers/staging/vt6655/wctl.h
@@ -0,0 +1,127 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: wctl.h
+ *
+ * Purpose:
+ *
+ * Author: Jerry Chen
+ *
+ * Date: Jun. 27, 2002
+ *
+ */
+
+
+#ifndef __WCTL_H__
+#define __WCTL_H__
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+#if !defined(__TETHER_H__)
+#include "tether.h"
+#endif
+#if !defined(__DEVICE_H__)
+#include "device.h"
+#endif
+
+
+
+/*---------------------  Export Definitions -------------------------*/
+
+#define IS_TYPE_DATA(pMACHeader)                                                        \
+    ((((PS802_11Header) pMACHeader)->wFrameCtl & TYPE_802_11_MASK) == TYPE_802_11_DATA)
+
+#define IS_TYPE_MGMT(pMACHeader)                                                        \
+    ((((PS802_11Header) pMACHeader)->wFrameCtl & TYPE_802_11_MASK) == TYPE_802_11_MGMT)
+
+#define IS_TYPE_CONTROL(pMACHeader)                                                     \
+    ((((PS802_11Header) pMACHeader)->wFrameCtl & TYPE_802_11_MASK) == TYPE_802_11_CTL)
+
+#define IS_FC_MOREDATA(pMACHeader)                                                      \
+    ((((PS802_11Header) pMACHeader)->wFrameCtl & FC_MOREDATA) == FC_MOREDATA)
+
+#define IS_FC_POWERMGT(pMACHeader)                                                      \
+    ((((PS802_11Header) pMACHeader)->wFrameCtl & FC_POWERMGT) == FC_POWERMGT)
+
+#define IS_FC_RETRY(pMACHeader)                                                         \
+    ((((PS802_11Header) pMACHeader)->wFrameCtl & FC_RETRY) == FC_RETRY)
+
+#define IS_FC_WEP(pMACHeader)                                                           \
+    ((((PS802_11Header) pMACHeader)->wFrameCtl & FC_WEP) == FC_WEP)
+
+#ifdef __BIG_ENDIAN
+
+#define IS_FRAGMENT_PKT(pMACHeader)                                                     \
+    (((((PS802_11Header) pMACHeader)->wFrameCtl & FC_MOREFRAG) != 0) |                  \
+     ((((PS802_11Header) pMACHeader)->wSeqCtl & 0x0F00) != 0))
+
+#define IS_FIRST_FRAGMENT_PKT(pMACHeader)                                               \
+    ((((PS802_11Header) pMACHeader)->wSeqCtl & 0x0F00) == 0)
+
+#else
+
+#define IS_FRAGMENT_PKT(pMACHeader)                                                     \
+    (((((PS802_11Header) pMACHeader)->wFrameCtl & FC_MOREFRAG) != 0) |                  \
+     ((((PS802_11Header) pMACHeader)->wSeqCtl & 0x000F) != 0))
+
+#define IS_FIRST_FRAGMENT_PKT(pMACHeader)                                               \
+    ((((PS802_11Header) pMACHeader)->wSeqCtl & 0x000F) == 0)
+
+#endif//#ifdef __BIG_ENDIAN
+
+#define IS_LAST_FRAGMENT_PKT(pMACHeader)                                                \
+    ((((PS802_11Header) pMACHeader)->wFrameCtl & FC_MOREFRAG) == 0)
+
+#define IS_CTL_PSPOLL(pMACHeader)                                                       \
+    ((((PS802_11Header) pMACHeader)->wFrameCtl & TYPE_SUBTYPE_MASK) == TYPE_CTL_PSPOLL)
+
+
+#define ADD_ONE_WITH_WRAP_AROUND(uVar, uModulo) {   \
+    if ((uVar) >= ((uModulo) - 1))                  \
+        (uVar) = 0;                                 \
+    else                                            \
+        (uVar)++;                                   \
+}
+
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+#ifdef __cplusplus
+extern "C" {                            /* Assume C declarations for C++ */
+#endif /* __cplusplus */
+
+BOOL WCTLbIsDuplicate(PSCache pCache, PS802_11Header pMACHeader);
+BOOL WCTLbHandleFragment(PSDevice pDevice, PS802_11Header pMACHeader, UINT cbFrameLength, BOOL bWEP, BOOL bExtIV);
+UINT WCTLuSearchDFCB(PSDevice pDevice, PS802_11Header pMACHeader);
+UINT WCTLuInsertDFCB(PSDevice pDevice, PS802_11Header pMACHeader);
+
+#ifdef __cplusplus
+}                                       /* End of extern "C" { */
+#endif /* __cplusplus */
+
+
+
+
+#endif // __WCTL_H__
+
+
+
diff --git a/drivers/staging/vt6655/wmgr.c b/drivers/staging/vt6655/wmgr.c
new file mode 100644
index 00000000000..c0886edac78
--- /dev/null
+++ b/drivers/staging/vt6655/wmgr.c
@@ -0,0 +1,5088 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: wmgr.c
+ *
+ * Purpose: Handles the 802.11 management functions
+ *
+ * Author: Lyndon Chen
+ *
+ * Date: May 8, 2002
+ *
+ * Functions:
+ *      nsMgrObjectInitial - Initialize Management Objet data structure
+ *      vMgrObjectReset - Reset Management Objet data structure
+ *      vMgrAssocBeginSta - Start associate function
+ *      vMgrReAssocBeginSta - Start reassociate function
+ *      vMgrDisassocBeginSta - Start disassociate function
+ *      s_vMgrRxAssocRequest - Handle Rcv associate_request
+ *      s_vMgrRxAssocResponse - Handle Rcv associate_response
+ *      vMrgAuthenBeginSta - Start authentication function
+ *      vMgrDeAuthenDeginSta - Start deauthentication function
+ *      s_vMgrRxAuthentication - Handle Rcv authentication
+ *      s_vMgrRxAuthenSequence_1 - Handle Rcv authentication sequence 1
+ *      s_vMgrRxAuthenSequence_2 - Handle Rcv authentication sequence 2
+ *      s_vMgrRxAuthenSequence_3 - Handle Rcv authentication sequence 3
+ *      s_vMgrRxAuthenSequence_4 - Handle Rcv authentication sequence 4
+ *      s_vMgrRxDisassociation - Handle Rcv disassociation
+ *      s_vMgrRxBeacon - Handle Rcv Beacon
+ *      vMgrCreateOwnIBSS - Create ad_hoc IBSS or AP BSS
+ *      vMgrJoinBSSBegin - Join BSS function
+ *      s_vMgrSynchBSS - Synch & adopt BSS parameters
+ *      s_MgrMakeBeacon - Create Baecon frame
+ *      s_MgrMakeProbeResponse - Create Probe Response frame
+ *      s_MgrMakeAssocRequest - Create Associate Request frame
+ *      s_MgrMakeReAssocRequest - Create ReAssociate Request frame
+ *      s_vMgrRxProbeResponse - Handle Rcv probe_response
+ *      s_vMrgRxProbeRequest - Handle Rcv probe_request
+ *      bMgrPrepareBeaconToSend - Prepare Beacon frame
+ *      s_vMgrLogStatus - Log 802.11 Status
+ *      vMgrRxManagePacket - Rcv management frame dispatch function
+ *      s_vMgrFormatTIM- Assember TIM field of beacon
+ *      vMgrTimerInit- Initial 1-sec and command call back funtions
+ *
+ * Revision History:
+ *
+ */
+
+
+#if !defined(__TMACRO_H__)
+#include "tmacro.h"
+#endif
+#if !defined(__TBIT_H__)
+#include "tbit.h"
+#endif
+#if !defined(__DESC_H__)
+#include "desc.h"
+#endif
+#if !defined(__DEVICE_H__)
+#include "device.h"
+#endif
+#if !defined(__CARD_H__)
+#include "card.h"
+#endif
+#if !defined(__80211HDR_H__)
+#include "80211hdr.h"
+#endif
+#if !defined(__80211MGR_H__)
+#include "80211mgr.h"
+#endif
+#if !defined(__WMGR_H__)
+#include "wmgr.h"
+#endif
+#if !defined(__WCMD_H__)
+#include "wcmd.h"
+#endif
+#if !defined(__MAC_H__)
+#include "mac.h"
+#endif
+#if !defined(__BSSDB_H__)
+#include "bssdb.h"
+#endif
+#if !defined(__POWER_H__)
+#include "power.h"
+#endif
+#if !defined(__DATARATE_H__)
+#include "datarate.h"
+#endif
+#if !defined(__BASEBAND_H__)
+#include "baseband.h"
+#endif
+#if !defined(__RXTX_H__)
+#include "rxtx.h"
+#endif
+#if !defined(__WPA_H__)
+#include "wpa.h"
+#endif
+#if !defined(__RF_H__)
+#include "rf.h"
+#endif
+#if !defined(__UMEM_H__)
+#include "umem.h"
+#endif
+#if !defined(__IOWPA_H__)
+#include "iowpa.h"
+#endif
+
+#define	PLICE_DEBUG
+
+/*---------------------  Static Definitions -------------------------*/
+
+
+
+/*---------------------  Static Classes  ----------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+static int          msglevel                =MSG_LEVEL_INFO;
+//static int          msglevel                =MSG_LEVEL_DEBUG;
+
+/*---------------------  Static Functions  --------------------------*/
+//2008-8-4 <add> by chester
+static BOOL ChannelExceedZoneType(
+    IN PSDevice pDevice,
+    IN BYTE byCurrChannel
+    );
+// Association/diassociation functions
+static
+PSTxMgmtPacket
+s_MgrMakeAssocRequest(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PBYTE pDAddr,
+    IN WORD wCurrCapInfo,
+    IN WORD wListenInterval,
+    IN PWLAN_IE_SSID pCurrSSID,
+    IN PWLAN_IE_SUPP_RATES pCurrRates,
+    IN PWLAN_IE_SUPP_RATES pCurrExtSuppRates
+    );
+
+static
+VOID
+s_vMgrRxAssocRequest(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PSRxMgmtPacket pRxPacket,
+    IN UINT  uNodeIndex
+    );
+
+static
+PSTxMgmtPacket
+s_MgrMakeReAssocRequest(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PBYTE pDAddr,
+    IN WORD wCurrCapInfo,
+    IN WORD wListenInterval,
+    IN PWLAN_IE_SSID pCurrSSID,
+    IN PWLAN_IE_SUPP_RATES pCurrRates,
+    IN PWLAN_IE_SUPP_RATES pCurrExtSuppRates
+    );
+
+static
+VOID
+s_vMgrRxAssocResponse(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PSRxMgmtPacket pRxPacket,
+    IN BOOL bReAssocType
+    );
+
+static
+VOID
+s_vMgrRxDisassociation(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PSRxMgmtPacket pRxPacket
+    );
+
+// Authentication/deauthen functions
+static
+VOID
+s_vMgrRxAuthenSequence_1(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PWLAN_FR_AUTHEN pFrame
+    );
+
+static
+VOID
+s_vMgrRxAuthenSequence_2(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PWLAN_FR_AUTHEN pFrame
+    );
+
+static
+VOID
+s_vMgrRxAuthenSequence_3(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PWLAN_FR_AUTHEN pFrame
+    );
+
+static
+VOID
+s_vMgrRxAuthenSequence_4(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PWLAN_FR_AUTHEN pFrame
+    );
+
+static
+VOID
+s_vMgrRxAuthentication(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PSRxMgmtPacket pRxPacket
+    );
+
+static
+VOID
+s_vMgrRxDeauthentication(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PSRxMgmtPacket pRxPacket
+    );
+
+// Scan functions
+// probe request/response functions
+static
+VOID
+s_vMgrRxProbeRequest(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PSRxMgmtPacket pRxPacket
+    );
+
+static
+VOID
+s_vMgrRxProbeResponse(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PSRxMgmtPacket pRxPacket
+    );
+
+// beacon functions
+static
+VOID
+s_vMgrRxBeacon(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PSRxMgmtPacket pRxPacket,
+    IN BOOL bInScan
+    );
+
+static
+VOID
+s_vMgrFormatTIM(
+    IN PSMgmtObject pMgmt,
+    IN PWLAN_IE_TIM pTIM
+    );
+
+static
+PSTxMgmtPacket
+s_MgrMakeBeacon(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN WORD wCurrCapInfo,
+    IN WORD wCurrBeaconPeriod,
+    IN UINT uCurrChannel,
+    IN WORD wCurrATIMWinodw,
+    IN PWLAN_IE_SSID pCurrSSID,
+    IN PBYTE pCurrBSSID,
+    IN PWLAN_IE_SUPP_RATES pCurrSuppRates,
+    IN PWLAN_IE_SUPP_RATES pCurrExtSuppRates
+    );
+
+
+// Association response
+static
+PSTxMgmtPacket
+s_MgrMakeAssocResponse(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN WORD wCurrCapInfo,
+    IN WORD wAssocStatus,
+    IN WORD wAssocAID,
+    IN PBYTE pDstAddr,
+    IN PWLAN_IE_SUPP_RATES pCurrSuppRates,
+    IN PWLAN_IE_SUPP_RATES pCurrExtSuppRates
+    );
+
+// ReAssociation response
+static
+PSTxMgmtPacket
+s_MgrMakeReAssocResponse(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN WORD wCurrCapInfo,
+    IN WORD wAssocStatus,
+    IN WORD wAssocAID,
+    IN PBYTE pDstAddr,
+    IN PWLAN_IE_SUPP_RATES pCurrSuppRates,
+    IN PWLAN_IE_SUPP_RATES pCurrExtSuppRates
+    );
+
+// Probe response
+static
+PSTxMgmtPacket
+s_MgrMakeProbeResponse(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN WORD wCurrCapInfo,
+    IN WORD wCurrBeaconPeriod,
+    IN UINT uCurrChannel,
+    IN WORD wCurrATIMWinodw,
+    IN PBYTE pDstAddr,
+    IN PWLAN_IE_SSID pCurrSSID,
+    IN PBYTE pCurrBSSID,
+    IN PWLAN_IE_SUPP_RATES pCurrSuppRates,
+    IN PWLAN_IE_SUPP_RATES pCurrExtSuppRates,
+    IN BYTE byPHYType
+    );
+
+// received status
+static
+VOID
+s_vMgrLogStatus(
+    IN PSMgmtObject pMgmt,
+    IN WORD wStatus
+    );
+
+
+static
+VOID
+s_vMgrSynchBSS (
+    IN PSDevice      pDevice,
+    IN UINT          uBSSMode,
+    IN PKnownBSS     pCurr,
+    OUT PCMD_STATUS  pStatus
+    );
+
+
+static BOOL
+s_bCipherMatch (
+    IN PKnownBSS                        pBSSNode,
+    IN NDIS_802_11_ENCRYPTION_STATUS    EncStatus,
+    OUT PBYTE                           pbyCCSPK,
+    OUT PBYTE                           pbyCCSGK
+    );
+
+
+ static VOID  Encyption_Rebuild(
+    IN PSDevice pDevice,
+    IN PKnownBSS pCurr
+ );
+/*
+static
+VOID
+s_vProbeChannel(
+    IN PSDevice pDevice
+    );
+
+static
+VOID
+s_vListenChannel(
+    IN PSDevice pDevice
+    );
+
+static
+PSTxMgmtPacket
+s_MgrMakeProbeRequest(
+    IN PSMgmtObject pMgmt,
+    IN PBYTE pScanBSSID,
+    IN PWLAN_IE_SSID pSSID,
+    IN PWLAN_IE_SUPP_RATES pCurrRates
+    );
+*/
+
+
+
+/*---------------------  Export Variables  --------------------------*/
+
+
+/*---------------------  Export Functions  --------------------------*/
+
+
+/*+
+ *
+ * Routine Description:
+ *    Allocates and initializes the Management object.
+ *
+ * Return Value:
+ *    Ndis_staus.
+ *
+-*/
+
+VOID
+vMgrObjectInit(
+    IN  HANDLE hDeviceContext
+    )
+{
+    PSDevice     pDevice = (PSDevice)hDeviceContext;
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+    int ii;
+
+
+    pMgmt->pbyPSPacketPool = &pMgmt->byPSPacketPool[0];
+    pMgmt->pbyMgmtPacketPool = &pMgmt->byMgmtPacketPool[0];
+    pMgmt->uCurrChannel = pDevice->uChannel;
+    for(ii=0;ii<WLAN_BSSID_LEN;ii++) {
+        pMgmt->abyDesireBSSID[ii] = 0xFF;
+    }
+    pMgmt->sAssocInfo.AssocInfo.Length = sizeof(NDIS_802_11_ASSOCIATION_INFORMATION);
+    //memset(pMgmt->abyDesireSSID, 0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN +1);
+    pMgmt->byCSSPK = KEY_CTL_NONE;
+    pMgmt->byCSSGK = KEY_CTL_NONE;
+    pMgmt->wIBSSBeaconPeriod = DEFAULT_IBSS_BI;
+    BSSvClearBSSList((HANDLE)pDevice, FALSE);
+
+    return;
+}
+
+/*+
+ *
+ * Routine Description:
+ *    Initializes timer object
+ *
+ * Return Value:
+ *    Ndis_staus.
+ *
+-*/
+
+void
+vMgrTimerInit(
+    IN  HANDLE hDeviceContext
+    )
+{
+    PSDevice     pDevice = (PSDevice)hDeviceContext;
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+
+
+    init_timer(&pMgmt->sTimerSecondCallback);
+    pMgmt->sTimerSecondCallback.data = (ULONG)pDevice;
+    pMgmt->sTimerSecondCallback.function = (TimerFunction)BSSvSecondCallBack;
+    pMgmt->sTimerSecondCallback.expires = RUN_AT(HZ);
+
+    init_timer(&pDevice->sTimerCommand);
+    pDevice->sTimerCommand.data = (ULONG)pDevice;
+    pDevice->sTimerCommand.function = (TimerFunction)vCommandTimer;
+    pDevice->sTimerCommand.expires = RUN_AT(HZ);
+
+   #ifdef TxInSleep
+    init_timer(&pDevice->sTimerTxData);
+    pDevice->sTimerTxData.data = (ULONG)pDevice;
+    pDevice->sTimerTxData.function = (TimerFunction)BSSvSecondTxData;
+    pDevice->sTimerTxData.expires = RUN_AT(10*HZ);      //10s callback
+    pDevice->fTxDataInSleep = FALSE;
+    pDevice->IsTxDataTrigger = FALSE;
+    pDevice->nTxDataTimeCout = 0;
+   #endif
+
+    pDevice->cbFreeCmdQueue = CMD_Q_SIZE;
+    pDevice->uCmdDequeueIdx = 0;
+    pDevice->uCmdEnqueueIdx = 0;
+
+    return;
+}
+
+
+
+/*+
+ *
+ * Routine Description:
+ *    Reset the management object  structure.
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+VOID
+vMgrObjectReset(
+    IN  HANDLE hDeviceContext
+    )
+{
+    PSDevice         pDevice = (PSDevice)hDeviceContext;
+    PSMgmtObject        pMgmt = pDevice->pMgmt;
+
+    pMgmt->eCurrMode = WMAC_MODE_STANDBY;
+    pMgmt->eCurrState = WMAC_STATE_IDLE;
+    pDevice->bEnablePSMode = FALSE;
+    // TODO: timer
+
+    return;
+}
+
+
+/*+
+ *
+ * Routine Description:
+ *    Start the station association procedure.  Namely, send an
+ *    association request frame to the AP.
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+
+VOID
+vMgrAssocBeginSta(
+    IN  HANDLE hDeviceContext,
+    IN  PSMgmtObject pMgmt,
+    OUT PCMD_STATUS pStatus
+    )
+{
+    PSDevice             pDevice = (PSDevice)hDeviceContext;
+    PSTxMgmtPacket          pTxPacket;
+
+
+    pMgmt->wCurrCapInfo = 0;
+    pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_ESS(1);
+    if (pDevice->bEncryptionEnable) {
+        pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_PRIVACY(1);
+    }
+    // always allow receive short preamble
+    //if (pDevice->byPreambleType == 1) {
+    //    pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_SHORTPREAMBLE(1);
+    //}
+    pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_SHORTPREAMBLE(1);
+    if (pMgmt->wListenInterval == 0)
+        pMgmt->wListenInterval = 1;    // at least one.
+
+    // ERP Phy (802.11g) should support short preamble.
+    if (pMgmt->eCurrentPHYMode == PHY_TYPE_11G) {
+        pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_SHORTPREAMBLE(1);
+        if (CARDbIsShorSlotTime(pMgmt->pAdapter) == TRUE) {
+            pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_SHORTSLOTTIME(1);
+        }
+    } else if (pMgmt->eCurrentPHYMode == PHY_TYPE_11B) {
+        if (CARDbIsShortPreamble(pMgmt->pAdapter) == TRUE) {
+            pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_SHORTPREAMBLE(1);
+        }
+    }
+    if (pMgmt->b11hEnable == TRUE)
+        pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_SPECTRUMMNG(1);
+
+    /* build an assocreq frame and send it */
+    pTxPacket = s_MgrMakeAssocRequest
+                (
+                  pDevice,
+                  pMgmt,
+                  pMgmt->abyCurrBSSID,
+                  pMgmt->wCurrCapInfo,
+                  pMgmt->wListenInterval,
+                  (PWLAN_IE_SSID)pMgmt->abyCurrSSID,
+                  (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
+                  (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrExtSuppRates
+                );
+
+    if (pTxPacket != NULL ){
+        /* send the frame */
+        *pStatus = csMgmt_xmit(pDevice, pTxPacket);
+        if (*pStatus == CMD_STATUS_PENDING) {
+            pMgmt->eCurrState = WMAC_STATE_ASSOCPENDING;
+            *pStatus = CMD_STATUS_SUCCESS;
+        }
+    }
+    else
+        *pStatus = CMD_STATUS_RESOURCES;
+
+    return ;
+}
+
+
+/*+
+ *
+ * Routine Description:
+ *    Start the station re-association procedure.
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+VOID
+vMgrReAssocBeginSta(
+    IN  HANDLE hDeviceContext,
+    IN  PSMgmtObject pMgmt,
+    OUT PCMD_STATUS pStatus
+    )
+{
+    PSDevice             pDevice = (PSDevice)hDeviceContext;
+    PSTxMgmtPacket          pTxPacket;
+
+
+
+    pMgmt->wCurrCapInfo = 0;
+    pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_ESS(1);
+    if (pDevice->bEncryptionEnable) {
+        pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_PRIVACY(1);
+    }
+
+    //if (pDevice->byPreambleType == 1) {
+    //    pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_SHORTPREAMBLE(1);
+    //}
+    pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_SHORTPREAMBLE(1);
+
+    if (pMgmt->wListenInterval == 0)
+        pMgmt->wListenInterval = 1;    // at least one.
+
+
+    // ERP Phy (802.11g) should support short preamble.
+    if (pMgmt->eCurrentPHYMode == PHY_TYPE_11G) {
+        pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_SHORTPREAMBLE(1);
+        if (CARDbIsShorSlotTime(pMgmt->pAdapter) == TRUE) {
+            pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_SHORTSLOTTIME(1);
+        }
+    } else if (pMgmt->eCurrentPHYMode == PHY_TYPE_11B) {
+        if (CARDbIsShortPreamble(pMgmt->pAdapter) == TRUE) {
+            pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_SHORTPREAMBLE(1);
+        }
+    }
+    if (pMgmt->b11hEnable == TRUE)
+        pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_SPECTRUMMNG(1);
+
+
+    pTxPacket = s_MgrMakeReAssocRequest
+                (
+                  pDevice,
+                  pMgmt,
+                  pMgmt->abyCurrBSSID,
+                  pMgmt->wCurrCapInfo,
+                  pMgmt->wListenInterval,
+                  (PWLAN_IE_SSID)pMgmt->abyCurrSSID,
+                  (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
+                  (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrExtSuppRates
+                );
+
+    if (pTxPacket != NULL ){
+        /* send the frame */
+        *pStatus = csMgmt_xmit(pDevice, pTxPacket);
+        if (*pStatus != CMD_STATUS_PENDING) {
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Mgt:Reassociation tx failed.\n");
+        }
+        else {
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Mgt:Reassociation tx sending.\n");
+        }
+    }
+
+
+    return ;
+}
+
+/*+
+ *
+ * Routine Description:
+ *    Send an dis-association request frame to the AP.
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+VOID
+vMgrDisassocBeginSta(
+    IN  HANDLE hDeviceContext,
+    IN  PSMgmtObject pMgmt,
+    IN  PBYTE  abyDestAddress,
+    IN  WORD    wReason,
+    OUT PCMD_STATUS pStatus
+    )
+{
+    PSDevice            pDevice = (PSDevice)hDeviceContext;
+    PSTxMgmtPacket      pTxPacket = NULL;
+    WLAN_FR_DISASSOC    sFrame;
+
+    pTxPacket = (PSTxMgmtPacket)pMgmt->pbyMgmtPacketPool;
+    memset(pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_DISASSOC_FR_MAXLEN);
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+
+    // Setup the sFrame structure
+    sFrame.pBuf = (PBYTE)pTxPacket->p80211Header;
+    sFrame.len = WLAN_DISASSOC_FR_MAXLEN;
+
+    // format fixed field frame structure
+    vMgrEncodeDisassociation(&sFrame);
+
+    // Setup the header
+    sFrame.pHdr->sA3.wFrameCtl = cpu_to_le16(
+        (
+        WLAN_SET_FC_FTYPE(WLAN_TYPE_MGR) |
+        WLAN_SET_FC_FSTYPE(WLAN_FSTYPE_DISASSOC)
+        ));
+
+    memcpy( sFrame.pHdr->sA3.abyAddr1, abyDestAddress, WLAN_ADDR_LEN);
+    memcpy( sFrame.pHdr->sA3.abyAddr2, pMgmt->abyMACAddr, WLAN_ADDR_LEN);
+    memcpy( sFrame.pHdr->sA3.abyAddr3, pMgmt->abyCurrBSSID, WLAN_BSSID_LEN);
+
+    // Set reason code
+    *(sFrame.pwReason) = cpu_to_le16(wReason);
+    pTxPacket->cbMPDULen = sFrame.len;
+    pTxPacket->cbPayloadLen = sFrame.len - WLAN_HDR_ADDR3_LEN;
+
+    // send the frame
+    *pStatus = csMgmt_xmit(pDevice, pTxPacket);
+    if (*pStatus == CMD_STATUS_PENDING) {
+        pMgmt->eCurrState = WMAC_STATE_IDLE;
+        *pStatus = CMD_STATUS_SUCCESS;
+    };
+
+    return;
+}
+
+
+
+/*+
+ *
+ * Routine Description:(AP function)
+ *    Handle incoming station association request frames.
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+static
+VOID
+s_vMgrRxAssocRequest(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PSRxMgmtPacket pRxPacket,
+    IN UINT uNodeIndex
+    )
+{
+    WLAN_FR_ASSOCREQ    sFrame;
+    CMD_STATUS          Status;
+    PSTxMgmtPacket      pTxPacket;
+    WORD                wAssocStatus = 0;
+    WORD                wAssocAID = 0;
+    UINT                uRateLen = WLAN_RATES_MAXLEN;
+    BYTE                abyCurrSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1];
+    BYTE                abyCurrExtSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1];
+
+
+    if (pMgmt->eCurrMode != WMAC_MODE_ESS_AP)
+        return;
+    //  node index not found
+    if (!uNodeIndex)
+        return;
+
+    //check if node is authenticated
+    //decode the frame
+    memset(&sFrame, 0, sizeof(WLAN_FR_ASSOCREQ));
+    memset(abyCurrSuppRates, 0, WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1);
+    memset(abyCurrExtSuppRates, 0, WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1);
+    sFrame.len = pRxPacket->cbMPDULen;
+    sFrame.pBuf = (PBYTE)pRxPacket->p80211Header;
+
+    vMgrDecodeAssocRequest(&sFrame);
+
+    if (pMgmt->sNodeDBTable[uNodeIndex].eNodeState >= NODE_AUTH) {
+        pMgmt->sNodeDBTable[uNodeIndex].eNodeState = NODE_ASSOC;
+        pMgmt->sNodeDBTable[uNodeIndex].wCapInfo = cpu_to_le16(*sFrame.pwCapInfo);
+        pMgmt->sNodeDBTable[uNodeIndex].wListenInterval = cpu_to_le16(*sFrame.pwListenInterval);
+        pMgmt->sNodeDBTable[uNodeIndex].bPSEnable =
+                WLAN_GET_FC_PWRMGT(sFrame.pHdr->sA3.wFrameCtl) ? TRUE : FALSE;
+        // Todo: check sta basic rate, if ap can't support, set status code
+        if (pDevice->eCurrentPHYType == PHY_TYPE_11B) {
+            uRateLen = WLAN_RATES_MAXLEN_11B;
+        }
+        abyCurrSuppRates[0] = WLAN_EID_SUPP_RATES;
+        abyCurrSuppRates[1] = RATEuSetIE((PWLAN_IE_SUPP_RATES)sFrame.pSuppRates,
+                                         (PWLAN_IE_SUPP_RATES)abyCurrSuppRates,
+                                         uRateLen);
+        abyCurrExtSuppRates[0] = WLAN_EID_EXTSUPP_RATES;
+        if (pDevice->eCurrentPHYType == PHY_TYPE_11G) {
+            abyCurrExtSuppRates[1] = RATEuSetIE((PWLAN_IE_SUPP_RATES)sFrame.pExtSuppRates,
+                                                (PWLAN_IE_SUPP_RATES)abyCurrExtSuppRates,
+                                                uRateLen);
+        } else {
+            abyCurrExtSuppRates[1] = 0;
+        }
+
+
+        RATEvParseMaxRate((PVOID)pDevice,
+                           (PWLAN_IE_SUPP_RATES)abyCurrSuppRates,
+                           (PWLAN_IE_SUPP_RATES)abyCurrExtSuppRates,
+                           FALSE, // do not change our basic rate
+                           &(pMgmt->sNodeDBTable[uNodeIndex].wMaxBasicRate),
+                           &(pMgmt->sNodeDBTable[uNodeIndex].wMaxSuppRate),
+                           &(pMgmt->sNodeDBTable[uNodeIndex].wSuppRate),
+                           &(pMgmt->sNodeDBTable[uNodeIndex].byTopCCKBasicRate),
+                           &(pMgmt->sNodeDBTable[uNodeIndex].byTopOFDMBasicRate)
+                          );
+
+        // set max tx rate
+        pMgmt->sNodeDBTable[uNodeIndex].wTxDataRate =
+                pMgmt->sNodeDBTable[uNodeIndex].wMaxSuppRate;
+#ifdef	PLICE_DEBUG
+	printk("RxAssocRequest:wTxDataRate is %d\n",pMgmt->sNodeDBTable[uNodeIndex].wTxDataRate);
+#endif
+		// Todo: check sta preamble, if ap can't support, set status code
+        pMgmt->sNodeDBTable[uNodeIndex].bShortPreamble =
+                WLAN_GET_CAP_INFO_SHORTPREAMBLE(*sFrame.pwCapInfo);
+        pMgmt->sNodeDBTable[uNodeIndex].bShortSlotTime =
+                WLAN_GET_CAP_INFO_SHORTSLOTTIME(*sFrame.pwCapInfo);
+        pMgmt->sNodeDBTable[uNodeIndex].wAID = (WORD)uNodeIndex;
+        wAssocStatus = WLAN_MGMT_STATUS_SUCCESS;
+        wAssocAID = (WORD)uNodeIndex;
+        // check if ERP support
+        if(pMgmt->sNodeDBTable[uNodeIndex].wMaxSuppRate > RATE_11M)
+           pMgmt->sNodeDBTable[uNodeIndex].bERPExist = TRUE;
+
+        if (pMgmt->sNodeDBTable[uNodeIndex].wMaxSuppRate <= RATE_11M) {
+            // B only STA join
+            pDevice->bProtectMode = TRUE;
+            pDevice->bNonERPPresent = TRUE;
+        }
+        if (pMgmt->sNodeDBTable[uNodeIndex].bShortPreamble == FALSE) {
+            pDevice->bBarkerPreambleMd = TRUE;
+        }
+
+        DEVICE_PRT(MSG_LEVEL_INFO, KERN_INFO "Associate AID= %d \n", wAssocAID);
+        DEVICE_PRT(MSG_LEVEL_INFO, KERN_INFO "MAC=%2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X \n",
+                   sFrame.pHdr->sA3.abyAddr2[0],
+                   sFrame.pHdr->sA3.abyAddr2[1],
+                   sFrame.pHdr->sA3.abyAddr2[2],
+                   sFrame.pHdr->sA3.abyAddr2[3],
+                   sFrame.pHdr->sA3.abyAddr2[4],
+                   sFrame.pHdr->sA3.abyAddr2[5]
+                  ) ;
+        DEVICE_PRT(MSG_LEVEL_INFO, KERN_INFO "Max Support rate = %d \n",
+                   pMgmt->sNodeDBTable[uNodeIndex].wMaxSuppRate);
+    }//else { TODO: received STA under state1 handle }
+    else {
+        return;
+    }
+
+
+    // assoc response reply..
+    pTxPacket = s_MgrMakeAssocResponse
+                (
+                  pDevice,
+                  pMgmt,
+                  pMgmt->wCurrCapInfo,
+                  wAssocStatus,
+                  wAssocAID,
+                  sFrame.pHdr->sA3.abyAddr2,
+                  (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
+                  (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrExtSuppRates
+                );
+    if (pTxPacket != NULL ){
+
+        if (pDevice->bEnableHostapd) {
+            return;
+        }
+        /* send the frame */
+        Status = csMgmt_xmit(pDevice, pTxPacket);
+        if (Status != CMD_STATUS_PENDING) {
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Mgt:Assoc response tx failed\n");
+        }
+        else {
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Mgt:Assoc response tx sending..\n");
+        }
+
+    }
+
+    return;
+}
+
+
+/*+
+ *
+ * Description:(AP function)
+ *      Handle incoming station re-association request frames.
+ *
+ * Parameters:
+ *  In:
+ *      pMgmt           - Management Object structure
+ *      pRxPacket       - Received Packet
+ *  Out:
+ *      none
+ *
+ * Return Value: None.
+ *
+-*/
+
+static
+VOID
+s_vMgrRxReAssocRequest(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PSRxMgmtPacket pRxPacket,
+    IN UINT uNodeIndex
+    )
+{
+    WLAN_FR_REASSOCREQ    sFrame;
+    CMD_STATUS          Status;
+    PSTxMgmtPacket      pTxPacket;
+    WORD                wAssocStatus = 0;
+    WORD                wAssocAID = 0;
+    UINT                uRateLen = WLAN_RATES_MAXLEN;
+    BYTE                abyCurrSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1];
+    BYTE                abyCurrExtSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1];
+
+    if (pMgmt->eCurrMode != WMAC_MODE_ESS_AP)
+        return;
+    //  node index not found
+    if (!uNodeIndex)
+        return;
+    //check if node is authenticated
+    //decode the frame
+    memset(&sFrame, 0, sizeof(WLAN_FR_REASSOCREQ));
+    sFrame.len = pRxPacket->cbMPDULen;
+    sFrame.pBuf = (PBYTE)pRxPacket->p80211Header;
+    vMgrDecodeReassocRequest(&sFrame);
+
+    if (pMgmt->sNodeDBTable[uNodeIndex].eNodeState >= NODE_AUTH) {
+        pMgmt->sNodeDBTable[uNodeIndex].eNodeState = NODE_ASSOC;
+        pMgmt->sNodeDBTable[uNodeIndex].wCapInfo = cpu_to_le16(*sFrame.pwCapInfo);
+        pMgmt->sNodeDBTable[uNodeIndex].wListenInterval = cpu_to_le16(*sFrame.pwListenInterval);
+        pMgmt->sNodeDBTable[uNodeIndex].bPSEnable =
+                WLAN_GET_FC_PWRMGT(sFrame.pHdr->sA3.wFrameCtl) ? TRUE : FALSE;
+        // Todo: check sta basic rate, if ap can't support, set status code
+
+        if (pDevice->eCurrentPHYType == PHY_TYPE_11B) {
+            uRateLen = WLAN_RATES_MAXLEN_11B;
+        }
+
+        abyCurrSuppRates[0] = WLAN_EID_SUPP_RATES;
+        abyCurrSuppRates[1] = RATEuSetIE((PWLAN_IE_SUPP_RATES)sFrame.pSuppRates,
+                                         (PWLAN_IE_SUPP_RATES)abyCurrSuppRates,
+                                         uRateLen);
+        abyCurrExtSuppRates[0] = WLAN_EID_EXTSUPP_RATES;
+        if (pDevice->eCurrentPHYType == PHY_TYPE_11G) {
+            abyCurrExtSuppRates[1] = RATEuSetIE((PWLAN_IE_SUPP_RATES)sFrame.pExtSuppRates,
+                                                (PWLAN_IE_SUPP_RATES)abyCurrExtSuppRates,
+                                                uRateLen);
+        } else {
+            abyCurrExtSuppRates[1] = 0;
+        }
+
+
+        RATEvParseMaxRate((PVOID)pDevice,
+                          (PWLAN_IE_SUPP_RATES)abyCurrSuppRates,
+                          (PWLAN_IE_SUPP_RATES)abyCurrExtSuppRates,
+                           FALSE, // do not change our basic rate
+                           &(pMgmt->sNodeDBTable[uNodeIndex].wMaxBasicRate),
+                           &(pMgmt->sNodeDBTable[uNodeIndex].wMaxSuppRate),
+                           &(pMgmt->sNodeDBTable[uNodeIndex].wSuppRate),
+                           &(pMgmt->sNodeDBTable[uNodeIndex].byTopCCKBasicRate),
+                           &(pMgmt->sNodeDBTable[uNodeIndex].byTopOFDMBasicRate)
+                          );
+
+        // set max tx rate
+        pMgmt->sNodeDBTable[uNodeIndex].wTxDataRate =
+                pMgmt->sNodeDBTable[uNodeIndex].wMaxSuppRate;
+#ifdef	PLICE_DEBUG
+	printk("RxReAssocRequest:TxDataRate is %d\n",pMgmt->sNodeDBTable[uNodeIndex].wTxDataRate);
+#endif
+		// Todo: check sta preamble, if ap can't support, set status code
+        pMgmt->sNodeDBTable[uNodeIndex].bShortPreamble =
+                WLAN_GET_CAP_INFO_SHORTPREAMBLE(*sFrame.pwCapInfo);
+        pMgmt->sNodeDBTable[uNodeIndex].bShortSlotTime =
+                WLAN_GET_CAP_INFO_SHORTSLOTTIME(*sFrame.pwCapInfo);
+        pMgmt->sNodeDBTable[uNodeIndex].wAID = (WORD)uNodeIndex;
+        wAssocStatus = WLAN_MGMT_STATUS_SUCCESS;
+        wAssocAID = (WORD)uNodeIndex;
+
+        // if suppurt ERP
+        if(pMgmt->sNodeDBTable[uNodeIndex].wMaxSuppRate > RATE_11M)
+           pMgmt->sNodeDBTable[uNodeIndex].bERPExist = TRUE;
+
+        if (pMgmt->sNodeDBTable[uNodeIndex].wMaxSuppRate <= RATE_11M) {
+            // B only STA join
+            pDevice->bProtectMode = TRUE;
+            pDevice->bNonERPPresent = TRUE;
+        }
+        if (pMgmt->sNodeDBTable[uNodeIndex].bShortPreamble == FALSE) {
+            pDevice->bBarkerPreambleMd = TRUE;
+        }
+
+        DEVICE_PRT(MSG_LEVEL_INFO, KERN_INFO "Rx ReAssociate AID= %d \n", wAssocAID);
+        DEVICE_PRT(MSG_LEVEL_INFO, KERN_INFO "MAC=%2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X \n",
+                   sFrame.pHdr->sA3.abyAddr2[0],
+                   sFrame.pHdr->sA3.abyAddr2[1],
+                   sFrame.pHdr->sA3.abyAddr2[2],
+                   sFrame.pHdr->sA3.abyAddr2[3],
+                   sFrame.pHdr->sA3.abyAddr2[4],
+                   sFrame.pHdr->sA3.abyAddr2[5]
+                  ) ;
+        DEVICE_PRT(MSG_LEVEL_INFO, KERN_INFO "Max Support rate = %d \n",
+                   pMgmt->sNodeDBTable[uNodeIndex].wMaxSuppRate);
+
+    }
+
+
+    // assoc response reply..
+    pTxPacket = s_MgrMakeReAssocResponse
+                (
+                  pDevice,
+                  pMgmt,
+                  pMgmt->wCurrCapInfo,
+                  wAssocStatus,
+                  wAssocAID,
+                  sFrame.pHdr->sA3.abyAddr2,
+                  (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
+                  (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrExtSuppRates
+                );
+
+    if (pTxPacket != NULL ){
+        /* send the frame */
+        if (pDevice->bEnableHostapd) {
+            return;
+        }
+        Status = csMgmt_xmit(pDevice, pTxPacket);
+        if (Status != CMD_STATUS_PENDING) {
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Mgt:ReAssoc response tx failed\n");
+        }
+        else {
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Mgt:ReAssoc response tx sending..\n");
+        }
+    }
+    return;
+}
+
+
+/*+
+ *
+ * Routine Description:
+ *    Handle incoming association response frames.
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+static
+VOID
+s_vMgrRxAssocResponse(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PSRxMgmtPacket pRxPacket,
+    IN BOOL bReAssocType
+    )
+{
+    WLAN_FR_ASSOCRESP   sFrame;
+    PWLAN_IE_SSID   pItemSSID;
+    PBYTE   pbyIEs;
+    viawget_wpa_header *wpahdr;
+
+
+
+    if (pMgmt->eCurrState == WMAC_STATE_ASSOCPENDING ||
+         pMgmt->eCurrState == WMAC_STATE_ASSOC) {
+
+        sFrame.len = pRxPacket->cbMPDULen;
+        sFrame.pBuf = (PBYTE)pRxPacket->p80211Header;
+        // decode the frame
+        vMgrDecodeAssocResponse(&sFrame);
+        if ((sFrame.pwCapInfo == 0) ||
+            (sFrame.pwStatus == 0) ||
+            (sFrame.pwAid == 0) ||
+            (sFrame.pSuppRates == 0)){
+            DBG_PORT80(0xCC);
+            return;
+        };
+
+        pMgmt->sAssocInfo.AssocInfo.ResponseFixedIEs.Capabilities = *(sFrame.pwCapInfo);
+        pMgmt->sAssocInfo.AssocInfo.ResponseFixedIEs.StatusCode = *(sFrame.pwStatus);
+        pMgmt->sAssocInfo.AssocInfo.ResponseFixedIEs.AssociationId = *(sFrame.pwAid);
+        pMgmt->sAssocInfo.AssocInfo.AvailableResponseFixedIEs |= 0x07;
+
+        pMgmt->sAssocInfo.AssocInfo.ResponseIELength = sFrame.len - 24 - 6;
+        pMgmt->sAssocInfo.AssocInfo.OffsetResponseIEs = pMgmt->sAssocInfo.AssocInfo.OffsetRequestIEs + pMgmt->sAssocInfo.AssocInfo.RequestIELength;
+        pbyIEs = pMgmt->sAssocInfo.abyIEs;
+        pbyIEs += pMgmt->sAssocInfo.AssocInfo.RequestIELength;
+        memcpy(pbyIEs, (sFrame.pBuf + 24 +6), pMgmt->sAssocInfo.AssocInfo.ResponseIELength);
+
+        // save values and set current BSS state
+        if (cpu_to_le16((*(sFrame.pwStatus))) == WLAN_MGMT_STATUS_SUCCESS ){
+            // set AID
+            pMgmt->wCurrAID = cpu_to_le16((*(sFrame.pwAid)));
+            if ( (pMgmt->wCurrAID >> 14) != (BIT0 | BIT1) )
+            {
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "AID from AP, has two msb clear.\n");
+            };
+            DEVICE_PRT(MSG_LEVEL_INFO, KERN_INFO "Association Successful, AID=%d.\n", pMgmt->wCurrAID & ~(BIT14|BIT15));
+            pMgmt->eCurrState = WMAC_STATE_ASSOC;
+            BSSvUpdateAPNode((HANDLE)pDevice, sFrame.pwCapInfo, sFrame.pSuppRates, sFrame.pExtSuppRates);
+            pItemSSID = (PWLAN_IE_SSID)pMgmt->abyCurrSSID;
+            DEVICE_PRT(MSG_LEVEL_INFO, KERN_INFO "Link with AP(SSID): %s\n", pItemSSID->abySSID);
+            pDevice->bLinkPass = TRUE;
+            pDevice->uBBVGADiffCount = 0;
+            if ((pDevice->bWPADEVUp) && (pDevice->skb != NULL)) {
+	  if(skb_tailroom(pDevice->skb) <(sizeof(viawget_wpa_header)+pMgmt->sAssocInfo.AssocInfo.ResponseIELength+
+		   	                                                 pMgmt->sAssocInfo.AssocInfo.RequestIELength)) {    //data room not enough
+                     dev_kfree_skb(pDevice->skb);
+		   pDevice->skb = dev_alloc_skb((int)pDevice->rx_buf_sz);
+	       	}
+                wpahdr = (viawget_wpa_header *)pDevice->skb->data;
+                wpahdr->type = VIAWGET_ASSOC_MSG;
+                wpahdr->resp_ie_len = pMgmt->sAssocInfo.AssocInfo.ResponseIELength;
+                wpahdr->req_ie_len = pMgmt->sAssocInfo.AssocInfo.RequestIELength;
+                memcpy(pDevice->skb->data + sizeof(viawget_wpa_header), pMgmt->sAssocInfo.abyIEs, wpahdr->req_ie_len);
+                memcpy(pDevice->skb->data + sizeof(viawget_wpa_header) + wpahdr->req_ie_len,
+                       pbyIEs,
+                       wpahdr->resp_ie_len
+                       );
+                skb_put(pDevice->skb, sizeof(viawget_wpa_header) + wpahdr->resp_ie_len + wpahdr->req_ie_len);
+                pDevice->skb->dev = pDevice->wpadev;
+                pDevice->skb->mac_header = pDevice->skb->data;
+                pDevice->skb->pkt_type = PACKET_HOST;
+                pDevice->skb->protocol = htons(ETH_P_802_2);
+                memset(pDevice->skb->cb, 0, sizeof(pDevice->skb->cb));
+                netif_rx(pDevice->skb);
+                pDevice->skb = dev_alloc_skb((int)pDevice->rx_buf_sz);
+            }
+
+//2008-0409-07, <Add> by Einsn Liu
+#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+	//if(pDevice->bWPADevEnable == TRUE)
+		{
+		BYTE buf[512];
+		size_t len;
+		union iwreq_data  wrqu;
+		int we_event;
+
+		memset(buf, 0, 512);
+
+		len = pMgmt->sAssocInfo.AssocInfo.RequestIELength;
+		if(len)	{
+			memcpy(buf, pMgmt->sAssocInfo.abyIEs, len);
+			memset(&wrqu, 0, sizeof (wrqu));
+			wrqu.data.length = len;
+			we_event = IWEVASSOCREQIE;
+			wireless_send_event(pDevice->dev, we_event, &wrqu, buf);
+		}
+
+		memset(buf, 0, 512);
+		len = pMgmt->sAssocInfo.AssocInfo.ResponseIELength;
+
+		if(len)	{
+			memcpy(buf, pbyIEs, len);
+			memset(&wrqu, 0, sizeof (wrqu));
+			wrqu.data.length = len;
+			we_event = IWEVASSOCRESPIE;
+			wireless_send_event(pDevice->dev, we_event, &wrqu, buf);
+		}
+
+
+  memset(&wrqu, 0, sizeof (wrqu));
+	memcpy(wrqu.ap_addr.sa_data, &pMgmt->abyCurrBSSID[0], ETH_ALEN);
+        wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+	wireless_send_event(pDevice->dev, SIOCGIWAP, &wrqu, NULL);
+	}
+#endif //#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+//End Add -- //2008-0409-07, <Add> by Einsn Liu
+		}
+        else {
+            if (bReAssocType) {
+                pMgmt->eCurrState = WMAC_STATE_IDLE;
+            }
+            else {
+                // jump back to the auth state and indicate the error
+                pMgmt->eCurrState = WMAC_STATE_AUTH;
+            }
+            s_vMgrLogStatus(pMgmt,cpu_to_le16((*(sFrame.pwStatus))));
+        }
+
+    }
+
+#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+//need clear flags related to Networkmanager
+
+              pDevice->bwextcount = 0;
+              pDevice->bWPASuppWextEnabled = FALSE;
+#endif
+
+
+if(pMgmt->eCurrState == WMAC_STATE_ASSOC)
+      timer_expire(pDevice->sTimerCommand, 0);
+    return;
+}
+
+
+
+/*+
+ *
+ * Routine Description:
+ *    Start the station authentication procedure.  Namely, send an
+ *    authentication frame to the AP.
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+VOID
+vMgrAuthenBeginSta(
+    IN  HANDLE hDeviceContext,
+    IN  PSMgmtObject  pMgmt,
+    OUT PCMD_STATUS pStatus
+    )
+{
+    PSDevice     pDevice = (PSDevice)hDeviceContext;
+    WLAN_FR_AUTHEN  sFrame;
+    PSTxMgmtPacket  pTxPacket = NULL;
+
+    pTxPacket = (PSTxMgmtPacket)pMgmt->pbyMgmtPacketPool;
+    memset(pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_AUTHEN_FR_MAXLEN);
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+    sFrame.pBuf = (PBYTE)pTxPacket->p80211Header;
+    sFrame.len = WLAN_AUTHEN_FR_MAXLEN;
+    vMgrEncodeAuthen(&sFrame);
+    /* insert values */
+    sFrame.pHdr->sA3.wFrameCtl = cpu_to_le16(
+        (
+        WLAN_SET_FC_FTYPE(WLAN_TYPE_MGR) |
+        WLAN_SET_FC_FSTYPE(WLAN_FSTYPE_AUTHEN)
+        ));
+    memcpy( sFrame.pHdr->sA3.abyAddr1, pMgmt->abyCurrBSSID, WLAN_ADDR_LEN);
+    memcpy( sFrame.pHdr->sA3.abyAddr2, pMgmt->abyMACAddr, WLAN_ADDR_LEN);
+    memcpy( sFrame.pHdr->sA3.abyAddr3, pMgmt->abyCurrBSSID, WLAN_BSSID_LEN);
+    if (pMgmt->bShareKeyAlgorithm)
+        *(sFrame.pwAuthAlgorithm) = cpu_to_le16(WLAN_AUTH_ALG_SHAREDKEY);
+    else
+        *(sFrame.pwAuthAlgorithm) = cpu_to_le16(WLAN_AUTH_ALG_OPENSYSTEM);
+
+    *(sFrame.pwAuthSequence) = cpu_to_le16(1);
+    /* Adjust the length fields */
+    pTxPacket->cbMPDULen = sFrame.len;
+    pTxPacket->cbPayloadLen = sFrame.len - WLAN_HDR_ADDR3_LEN;
+
+    *pStatus = csMgmt_xmit(pDevice, pTxPacket);
+    if (*pStatus == CMD_STATUS_PENDING){
+        pMgmt->eCurrState = WMAC_STATE_AUTHPENDING;
+        *pStatus = CMD_STATUS_SUCCESS;
+    }
+
+    return ;
+}
+
+
+
+/*+
+ *
+ * Routine Description:
+ *    Start the station(AP) deauthentication procedure.  Namely, send an
+ *    deauthentication frame to the AP or Sta.
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+VOID
+vMgrDeAuthenBeginSta(
+    IN  HANDLE hDeviceContext,
+    IN  PSMgmtObject  pMgmt,
+    IN  PBYTE  abyDestAddress,
+    IN  WORD    wReason,
+    OUT PCMD_STATUS pStatus
+    )
+{
+    PSDevice            pDevice = (PSDevice)hDeviceContext;
+    WLAN_FR_DEAUTHEN    sFrame;
+    PSTxMgmtPacket      pTxPacket = NULL;
+
+
+    pTxPacket = (PSTxMgmtPacket)pMgmt->pbyMgmtPacketPool;
+    memset(pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_DEAUTHEN_FR_MAXLEN);
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+    sFrame.pBuf = (PBYTE)pTxPacket->p80211Header;
+    sFrame.len = WLAN_DEAUTHEN_FR_MAXLEN;
+    vMgrEncodeDeauthen(&sFrame);
+    /* insert values */
+    sFrame.pHdr->sA3.wFrameCtl = cpu_to_le16(
+        (
+        WLAN_SET_FC_FTYPE(WLAN_TYPE_MGR) |
+        WLAN_SET_FC_FSTYPE(WLAN_FSTYPE_DEAUTHEN)
+        ));
+
+    memcpy( sFrame.pHdr->sA3.abyAddr1, abyDestAddress, WLAN_ADDR_LEN);
+    memcpy( sFrame.pHdr->sA3.abyAddr2, pMgmt->abyMACAddr, WLAN_ADDR_LEN);
+    memcpy( sFrame.pHdr->sA3.abyAddr3, pMgmt->abyCurrBSSID, WLAN_BSSID_LEN);
+
+    *(sFrame.pwReason) = cpu_to_le16(wReason);       // deauthen. bcs left BSS
+    /* Adjust the length fields */
+    pTxPacket->cbMPDULen = sFrame.len;
+    pTxPacket->cbPayloadLen = sFrame.len - WLAN_HDR_ADDR3_LEN;
+
+    *pStatus = csMgmt_xmit(pDevice, pTxPacket);
+    if (*pStatus == CMD_STATUS_PENDING){
+        *pStatus = CMD_STATUS_SUCCESS;
+    }
+
+
+    return ;
+}
+
+
+/*+
+ *
+ * Routine Description:
+ *    Handle incoming authentication frames.
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+static
+VOID
+s_vMgrRxAuthentication(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PSRxMgmtPacket pRxPacket
+    )
+{
+    WLAN_FR_AUTHEN  sFrame;
+
+    // we better be an AP or a STA in AUTHPENDING otherwise ignore
+    if (!(pMgmt->eCurrMode == WMAC_MODE_ESS_AP ||
+          pMgmt->eCurrState == WMAC_STATE_AUTHPENDING)) {
+        return;
+    }
+
+    // decode the frame
+    sFrame.len = pRxPacket->cbMPDULen;
+    sFrame.pBuf = (PBYTE)pRxPacket->p80211Header;
+    vMgrDecodeAuthen(&sFrame);
+    switch (cpu_to_le16((*(sFrame.pwAuthSequence )))){
+        case 1:
+            //AP funciton
+            s_vMgrRxAuthenSequence_1(pDevice,pMgmt, &sFrame);
+            break;
+        case 2:
+            s_vMgrRxAuthenSequence_2(pDevice, pMgmt, &sFrame);
+            break;
+        case 3:
+            //AP funciton
+            s_vMgrRxAuthenSequence_3(pDevice, pMgmt, &sFrame);
+            break;
+        case 4:
+            s_vMgrRxAuthenSequence_4(pDevice, pMgmt, &sFrame);
+            break;
+        default:
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Auth Sequence error, seq = %d\n",
+                        cpu_to_le16((*(sFrame.pwAuthSequence))));
+            break;
+    }
+    return;
+}
+
+
+
+/*+
+ *
+ * Routine Description:
+ *   Handles incoming authen frames with sequence 1.  Currently
+ *   assumes we're an AP.  So far, no one appears to use authentication
+ *   in Ad-Hoc mode.
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+
+static
+VOID
+s_vMgrRxAuthenSequence_1(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PWLAN_FR_AUTHEN pFrame
+     )
+{
+    PSTxMgmtPacket      pTxPacket = NULL;
+    UINT                uNodeIndex;
+    WLAN_FR_AUTHEN      sFrame;
+    PSKeyItem           pTransmitKey;
+
+    // Insert a Node entry
+    if (!BSSDBbIsSTAInNodeDB(pMgmt, pFrame->pHdr->sA3.abyAddr2, &uNodeIndex)) {
+        BSSvCreateOneNode((PSDevice)pDevice, &uNodeIndex);
+        memcpy(pMgmt->sNodeDBTable[uNodeIndex].abyMACAddr, pFrame->pHdr->sA3.abyAddr2,
+               WLAN_ADDR_LEN);
+    }
+
+    if (pMgmt->bShareKeyAlgorithm) {
+        pMgmt->sNodeDBTable[uNodeIndex].eNodeState = NODE_KNOWN;
+        pMgmt->sNodeDBTable[uNodeIndex].byAuthSequence = 1;
+    }
+    else {
+        pMgmt->sNodeDBTable[uNodeIndex].eNodeState = NODE_AUTH;
+    }
+
+    // send auth reply
+    pTxPacket = (PSTxMgmtPacket)pMgmt->pbyMgmtPacketPool;
+    memset(pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_AUTHEN_FR_MAXLEN);
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+    sFrame.pBuf = (PBYTE)pTxPacket->p80211Header;
+    sFrame.len = WLAN_AUTHEN_FR_MAXLEN;
+    // format buffer structure
+    vMgrEncodeAuthen(&sFrame);
+    // insert values
+    sFrame.pHdr->sA3.wFrameCtl = cpu_to_le16(
+         (
+         WLAN_SET_FC_FTYPE(WLAN_TYPE_MGR) |
+         WLAN_SET_FC_FSTYPE(WLAN_FSTYPE_AUTHEN)|
+         WLAN_SET_FC_ISWEP(0)
+         ));
+    memcpy( sFrame.pHdr->sA3.abyAddr1, pFrame->pHdr->sA3.abyAddr2, WLAN_ADDR_LEN);
+    memcpy( sFrame.pHdr->sA3.abyAddr2, pMgmt->abyMACAddr, WLAN_ADDR_LEN);
+    memcpy( sFrame.pHdr->sA3.abyAddr3, pMgmt->abyCurrBSSID, WLAN_BSSID_LEN);
+    *(sFrame.pwAuthAlgorithm) = *(pFrame->pwAuthAlgorithm);
+    *(sFrame.pwAuthSequence) = cpu_to_le16(2);
+
+    if (cpu_to_le16(*(pFrame->pwAuthAlgorithm)) == WLAN_AUTH_ALG_SHAREDKEY) {
+        if (pMgmt->bShareKeyAlgorithm)
+            *(sFrame.pwStatus) = cpu_to_le16(WLAN_MGMT_STATUS_SUCCESS);
+        else
+            *(sFrame.pwStatus) = cpu_to_le16(WLAN_MGMT_STATUS_UNSUPPORTED_AUTHALG);
+    }
+    else {
+        if (pMgmt->bShareKeyAlgorithm)
+            *(sFrame.pwStatus) = cpu_to_le16(WLAN_MGMT_STATUS_UNSUPPORTED_AUTHALG);
+        else
+            *(sFrame.pwStatus) = cpu_to_le16(WLAN_MGMT_STATUS_SUCCESS);
+    }
+
+    if (pMgmt->bShareKeyAlgorithm &&
+        (cpu_to_le16(*(sFrame.pwStatus)) == WLAN_MGMT_STATUS_SUCCESS)) {
+
+        sFrame.pChallenge = (PWLAN_IE_CHALLENGE)(sFrame.pBuf + sFrame.len);
+        sFrame.len += WLAN_CHALLENGE_IE_LEN;
+        sFrame.pChallenge->byElementID = WLAN_EID_CHALLENGE;
+        sFrame.pChallenge->len = WLAN_CHALLENGE_LEN;
+        memset(pMgmt->abyChallenge, 0, WLAN_CHALLENGE_LEN);
+        // get group key
+        if(KeybGetTransmitKey(&(pDevice->sKey), pDevice->abyBroadcastAddr, GROUP_KEY, &pTransmitKey) == TRUE) {
+            rc4_init(&pDevice->SBox, pDevice->abyPRNG, pTransmitKey->uKeyLength+3);
+            rc4_encrypt(&pDevice->SBox, pMgmt->abyChallenge, pMgmt->abyChallenge, WLAN_CHALLENGE_LEN);
+        }
+        memcpy(sFrame.pChallenge->abyChallenge, pMgmt->abyChallenge , WLAN_CHALLENGE_LEN);
+    }
+
+    /* Adjust the length fields */
+    pTxPacket->cbMPDULen = sFrame.len;
+    pTxPacket->cbPayloadLen = sFrame.len - WLAN_HDR_ADDR3_LEN;
+    // send the frame
+    if (pDevice->bEnableHostapd) {
+        return;
+    }
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Mgt:Authreq_reply sequence_1 tx.. \n");
+    if (csMgmt_xmit(pDevice, pTxPacket) != CMD_STATUS_PENDING) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Mgt:Authreq_reply sequence_1 tx failed.\n");
+    }
+    return;
+}
+
+
+
+/*+
+ *
+ * Routine Description:
+ *   Handles incoming auth frames with sequence number 2.  Currently
+ *   assumes we're a station.
+ *
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+static
+VOID
+s_vMgrRxAuthenSequence_2(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PWLAN_FR_AUTHEN pFrame
+    )
+{
+    WLAN_FR_AUTHEN      sFrame;
+    PSTxMgmtPacket      pTxPacket = NULL;
+
+
+    switch (cpu_to_le16((*(pFrame->pwAuthAlgorithm))))
+    {
+        case WLAN_AUTH_ALG_OPENSYSTEM:
+            if ( cpu_to_le16((*(pFrame->pwStatus))) == WLAN_MGMT_STATUS_SUCCESS ){
+                DEVICE_PRT(MSG_LEVEL_INFO, KERN_INFO "802.11 Authen (OPEN) Successful.\n");
+                pMgmt->eCurrState = WMAC_STATE_AUTH;
+	 timer_expire(pDevice->sTimerCommand, 0);
+            }
+            else {
+                DEVICE_PRT(MSG_LEVEL_INFO, KERN_INFO "802.11 Authen (OPEN) Failed.\n");
+                s_vMgrLogStatus(pMgmt, cpu_to_le16((*(pFrame->pwStatus))));
+                pMgmt->eCurrState = WMAC_STATE_IDLE;
+            }
+            if (pDevice->eCommandState == WLAN_AUTHENTICATE_WAIT ) {
+//                spin_unlock_irq(&pDevice->lock);
+//                vCommandTimerWait((HANDLE)pDevice, 0);
+//                spin_lock_irq(&pDevice->lock);
+            }
+
+            break;
+
+        case WLAN_AUTH_ALG_SHAREDKEY:
+
+            if (cpu_to_le16((*(pFrame->pwStatus))) == WLAN_MGMT_STATUS_SUCCESS) {
+                pTxPacket = (PSTxMgmtPacket)pMgmt->pbyMgmtPacketPool;
+                memset(pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_AUTHEN_FR_MAXLEN);
+                pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+                sFrame.pBuf = (PBYTE)pTxPacket->p80211Header;
+                sFrame.len = WLAN_AUTHEN_FR_MAXLEN;
+                // format buffer structure
+                vMgrEncodeAuthen(&sFrame);
+                // insert values
+                sFrame.pHdr->sA3.wFrameCtl = cpu_to_le16(
+                     (
+                     WLAN_SET_FC_FTYPE(WLAN_TYPE_MGR) |
+                     WLAN_SET_FC_FSTYPE(WLAN_FSTYPE_AUTHEN)|
+                     WLAN_SET_FC_ISWEP(1)
+                     ));
+                memcpy( sFrame.pHdr->sA3.abyAddr1, pMgmt->abyCurrBSSID, WLAN_BSSID_LEN);
+                memcpy( sFrame.pHdr->sA3.abyAddr2, pMgmt->abyMACAddr, WLAN_ADDR_LEN);
+                memcpy( sFrame.pHdr->sA3.abyAddr3, pMgmt->abyCurrBSSID, WLAN_BSSID_LEN);
+                *(sFrame.pwAuthAlgorithm) = *(pFrame->pwAuthAlgorithm);
+                *(sFrame.pwAuthSequence) = cpu_to_le16(3);
+                *(sFrame.pwStatus) = cpu_to_le16(WLAN_MGMT_STATUS_SUCCESS);
+                sFrame.pChallenge = (PWLAN_IE_CHALLENGE)(sFrame.pBuf + sFrame.len);
+                sFrame.len += WLAN_CHALLENGE_IE_LEN;
+                sFrame.pChallenge->byElementID = WLAN_EID_CHALLENGE;
+                sFrame.pChallenge->len = WLAN_CHALLENGE_LEN;
+                memcpy( sFrame.pChallenge->abyChallenge, pFrame->pChallenge->abyChallenge, WLAN_CHALLENGE_LEN);
+                // Adjust the length fields
+                pTxPacket->cbMPDULen = sFrame.len;
+                pTxPacket->cbPayloadLen = sFrame.len - WLAN_HDR_ADDR3_LEN;
+                // send the frame
+                if (csMgmt_xmit(pDevice, pTxPacket) != CMD_STATUS_PENDING) {
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Mgt:Auth_reply sequence_2 tx failed.\n");
+                }
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Mgt:Auth_reply sequence_2 tx ...\n");
+            }
+            else {
+            	DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Mgt:rx Auth_reply sequence_2 status error ...\n");
+                if ( pDevice->eCommandState == WLAN_AUTHENTICATE_WAIT ) {
+//                    spin_unlock_irq(&pDevice->lock);
+//                    vCommandTimerWait((HANDLE)pDevice, 0);
+//                    spin_lock_irq(&pDevice->lock);
+                }
+                s_vMgrLogStatus(pMgmt, cpu_to_le16((*(pFrame->pwStatus))));
+            }
+            break;
+        default:
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Mgt: rx auth.seq = 2 unknown AuthAlgorithm=%d\n", cpu_to_le16((*(pFrame->pwAuthAlgorithm))));
+            break;
+    }
+    return;
+}
+
+
+
+/*+
+ *
+ * Routine Description:
+ *   Handles incoming authen frames with sequence 3.  Currently
+ *   assumes we're an AP.  This function assumes the frame has
+ *   already been successfully decrypted.
+ *
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+static
+VOID
+s_vMgrRxAuthenSequence_3(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PWLAN_FR_AUTHEN pFrame
+    )
+{
+    PSTxMgmtPacket      pTxPacket = NULL;
+    UINT                uStatusCode = 0 ;
+    UINT                uNodeIndex = 0;
+    WLAN_FR_AUTHEN      sFrame;
+
+    if (!WLAN_GET_FC_ISWEP(pFrame->pHdr->sA3.wFrameCtl)) {
+        uStatusCode = WLAN_MGMT_STATUS_CHALLENGE_FAIL;
+        goto reply;
+    }
+    if (BSSDBbIsSTAInNodeDB(pMgmt, pFrame->pHdr->sA3.abyAddr2, &uNodeIndex)) {
+         if (pMgmt->sNodeDBTable[uNodeIndex].byAuthSequence != 1) {
+            uStatusCode = WLAN_MGMT_STATUS_RX_AUTH_NOSEQ;
+            goto reply;
+         }
+         if (memcmp(pMgmt->abyChallenge, pFrame->pChallenge->abyChallenge, WLAN_CHALLENGE_LEN) != 0) {
+            uStatusCode = WLAN_MGMT_STATUS_CHALLENGE_FAIL;
+            goto reply;
+         }
+    }
+    else {
+        uStatusCode = WLAN_MGMT_STATUS_UNSPEC_FAILURE;
+        goto reply;
+    }
+
+    if (uNodeIndex) {
+        pMgmt->sNodeDBTable[uNodeIndex].eNodeState = NODE_AUTH;
+        pMgmt->sNodeDBTable[uNodeIndex].byAuthSequence = 0;
+    }
+    uStatusCode = WLAN_MGMT_STATUS_SUCCESS;
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Challenge text check ok..\n");
+
+reply:
+    // send auth reply
+    pTxPacket = (PSTxMgmtPacket)pMgmt->pbyMgmtPacketPool;
+    memset(pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_AUTHEN_FR_MAXLEN);
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+    sFrame.pBuf = (PBYTE)pTxPacket->p80211Header;
+    sFrame.len = WLAN_AUTHEN_FR_MAXLEN;
+    // format buffer structure
+    vMgrEncodeAuthen(&sFrame);
+    /* insert values */
+    sFrame.pHdr->sA3.wFrameCtl = cpu_to_le16(
+         (
+         WLAN_SET_FC_FTYPE(WLAN_TYPE_MGR) |
+         WLAN_SET_FC_FSTYPE(WLAN_FSTYPE_AUTHEN)|
+         WLAN_SET_FC_ISWEP(0)
+         ));
+    memcpy( sFrame.pHdr->sA3.abyAddr1, pFrame->pHdr->sA3.abyAddr2, WLAN_ADDR_LEN);
+    memcpy( sFrame.pHdr->sA3.abyAddr2, pMgmt->abyMACAddr, WLAN_ADDR_LEN);
+    memcpy( sFrame.pHdr->sA3.abyAddr3, pMgmt->abyCurrBSSID, WLAN_BSSID_LEN);
+    *(sFrame.pwAuthAlgorithm) = *(pFrame->pwAuthAlgorithm);
+    *(sFrame.pwAuthSequence) = cpu_to_le16(4);
+    *(sFrame.pwStatus) = cpu_to_le16(uStatusCode);
+
+    /* Adjust the length fields */
+    pTxPacket->cbMPDULen = sFrame.len;
+    pTxPacket->cbPayloadLen = sFrame.len - WLAN_HDR_ADDR3_LEN;
+    // send the frame
+    if (pDevice->bEnableHostapd) {
+        return;
+    }
+    if (csMgmt_xmit(pDevice, pTxPacket) != CMD_STATUS_PENDING) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Mgt:Authreq_reply sequence_4 tx failed.\n");
+    }
+    return;
+
+}
+
+
+
+/*+
+ *
+ * Routine Description:
+ *   Handles incoming authen frames with sequence 4
+ *
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+static
+VOID
+s_vMgrRxAuthenSequence_4(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PWLAN_FR_AUTHEN pFrame
+    )
+{
+
+    if ( cpu_to_le16((*(pFrame->pwStatus))) == WLAN_MGMT_STATUS_SUCCESS ){
+        DEVICE_PRT(MSG_LEVEL_INFO, KERN_INFO "802.11 Authen (SHAREDKEY) Successful.\n");
+        pMgmt->eCurrState = WMAC_STATE_AUTH;
+	  timer_expire(pDevice->sTimerCommand, 0);
+    }
+    else{
+        DEVICE_PRT(MSG_LEVEL_INFO, KERN_INFO "802.11 Authen (SHAREDKEY) Failed.\n");
+        s_vMgrLogStatus(pMgmt, cpu_to_le16((*(pFrame->pwStatus))) );
+        pMgmt->eCurrState = WMAC_STATE_IDLE;
+    }
+
+    if ( pDevice->eCommandState == WLAN_AUTHENTICATE_WAIT ) {
+//        spin_unlock_irq(&pDevice->lock);
+//        vCommandTimerWait((HANDLE)pDevice, 0);
+//        spin_lock_irq(&pDevice->lock);
+    }
+
+}
+
+/*+
+ *
+ * Routine Description:
+ *   Handles incoming disassociation frames
+ *
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+static
+VOID
+s_vMgrRxDisassociation(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PSRxMgmtPacket pRxPacket
+    )
+{
+    WLAN_FR_DISASSOC    sFrame;
+    UINT        uNodeIndex = 0;
+//    CMD_STATUS          CmdStatus;
+    viawget_wpa_header *wpahdr;
+
+    if ( pMgmt->eCurrMode == WMAC_MODE_ESS_AP ){
+        // if is acting an AP..
+        // a STA is leaving this BSS..
+        sFrame.len = pRxPacket->cbMPDULen;
+        sFrame.pBuf = (PBYTE)pRxPacket->p80211Header;
+        if (BSSDBbIsSTAInNodeDB(pMgmt, pRxPacket->p80211Header->sA3.abyAddr2, &uNodeIndex)) {
+            BSSvRemoveOneNode(pDevice, uNodeIndex);
+        }
+        else {
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Rx disassoc, sta not found\n");
+        }
+    }
+    else if (pMgmt->eCurrMode == WMAC_MODE_ESS_STA ){
+        sFrame.len = pRxPacket->cbMPDULen;
+        sFrame.pBuf = (PBYTE)pRxPacket->p80211Header;
+        vMgrDecodeDisassociation(&sFrame);
+        DEVICE_PRT(MSG_LEVEL_NOTICE, KERN_INFO "AP disassociated me, reason=%d.\n", cpu_to_le16(*(sFrame.pwReason)));
+        //TODO: do something let upper layer know or
+        //try to send associate packet again because of inactivity timeout
+      //  if (pMgmt->eCurrState == WMAC_STATE_ASSOC) {
+       //     vMgrReAssocBeginSta((PSDevice)pDevice, pMgmt, &CmdStatus);
+      //  };
+        if ((pDevice->bWPADEVUp) && (pDevice->skb != NULL)) {
+             wpahdr = (viawget_wpa_header *)pDevice->skb->data;
+             wpahdr->type = VIAWGET_DISASSOC_MSG;
+             wpahdr->resp_ie_len = 0;
+             wpahdr->req_ie_len = 0;
+             skb_put(pDevice->skb, sizeof(viawget_wpa_header));
+             pDevice->skb->dev = pDevice->wpadev;
+	         pDevice->skb->mac_header = pDevice->skb->data;
+
+             pDevice->skb->pkt_type = PACKET_HOST;
+             pDevice->skb->protocol = htons(ETH_P_802_2);
+             memset(pDevice->skb->cb, 0, sizeof(pDevice->skb->cb));
+             netif_rx(pDevice->skb);
+             pDevice->skb = dev_alloc_skb((int)pDevice->rx_buf_sz);
+         };
+
+ #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+  // if(pDevice->bWPASuppWextEnabled == TRUE)
+      {
+	union iwreq_data  wrqu;
+	memset(&wrqu, 0, sizeof (wrqu));
+        wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+	printk("wireless_send_event--->SIOCGIWAP(disassociated)\n");
+	wireless_send_event(pDevice->dev, SIOCGIWAP, &wrqu, NULL);
+     }
+  #endif
+
+    }
+    /* else, ignore it */
+
+    return;
+}
+
+
+/*+
+ *
+ * Routine Description:
+ *   Handles incoming deauthentication frames
+ *
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+static
+VOID
+s_vMgrRxDeauthentication(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PSRxMgmtPacket pRxPacket
+    )
+{
+    WLAN_FR_DEAUTHEN    sFrame;
+    UINT        uNodeIndex = 0;
+    viawget_wpa_header *wpahdr;
+
+
+    if (pMgmt->eCurrMode == WMAC_MODE_ESS_AP ){
+        //Todo:
+        // if is acting an AP..
+        // a STA is leaving this BSS..
+        sFrame.len = pRxPacket->cbMPDULen;
+        sFrame.pBuf = (PBYTE)pRxPacket->p80211Header;
+        if (BSSDBbIsSTAInNodeDB(pMgmt, pRxPacket->p80211Header->sA3.abyAddr2, &uNodeIndex)) {
+            BSSvRemoveOneNode(pDevice, uNodeIndex);
+        }
+        else {
+            DEVICE_PRT(MSG_LEVEL_NOTICE, KERN_INFO "Rx deauth, sta not found\n");
+        }
+    }
+    else {
+        if (pMgmt->eCurrMode == WMAC_MODE_ESS_STA ) {
+            sFrame.len = pRxPacket->cbMPDULen;
+            sFrame.pBuf = (PBYTE)pRxPacket->p80211Header;
+            vMgrDecodeDeauthen(&sFrame);
+            DEVICE_PRT(MSG_LEVEL_NOTICE, KERN_INFO  "AP deauthed me, reason=%d.\n", cpu_to_le16((*(sFrame.pwReason))));
+            // TODO: update BSS list for specific BSSID if pre-authentication case
+            if (IS_ETH_ADDRESS_EQUAL(sFrame.pHdr->sA3.abyAddr3, pMgmt->abyCurrBSSID)) {
+                if (pMgmt->eCurrState >= WMAC_STATE_AUTHPENDING) {
+                    pMgmt->sNodeDBTable[0].bActive = FALSE;
+                    pMgmt->eCurrMode = WMAC_MODE_STANDBY;
+                    pMgmt->eCurrState = WMAC_STATE_IDLE;
+                    netif_stop_queue(pDevice->dev);
+                    pDevice->bLinkPass = FALSE;
+                }
+            };
+
+            if ((pDevice->bWPADEVUp) && (pDevice->skb != NULL)) {
+                 wpahdr = (viawget_wpa_header *)pDevice->skb->data;
+                 wpahdr->type = VIAWGET_DISASSOC_MSG;
+                 wpahdr->resp_ie_len = 0;
+                 wpahdr->req_ie_len = 0;
+                 skb_put(pDevice->skb, sizeof(viawget_wpa_header));
+                 pDevice->skb->dev = pDevice->wpadev;
+                 pDevice->skb->mac_header = pDevice->skb->data;
+                 pDevice->skb->pkt_type = PACKET_HOST;
+                 pDevice->skb->protocol = htons(ETH_P_802_2);
+                 memset(pDevice->skb->cb, 0, sizeof(pDevice->skb->cb));
+                 netif_rx(pDevice->skb);
+                 pDevice->skb = dev_alloc_skb((int)pDevice->rx_buf_sz);
+           };
+
+	   #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+  // if(pDevice->bWPASuppWextEnabled == TRUE)
+      {
+	union iwreq_data  wrqu;
+	memset(&wrqu, 0, sizeof (wrqu));
+        wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+	printk("wireless_send_event--->SIOCGIWAP(disauthen)\n");
+	wireless_send_event(pDevice->dev, SIOCGIWAP, &wrqu, NULL);
+     }
+  #endif
+
+        }
+        /* else, ignore it.  TODO: IBSS authentication service
+            would be implemented here */
+    };
+    return;
+}
+
+
+//2008-8-4 <add> by chester
+/*+
+ *
+ * Routine Description:
+ * check if current channel is match ZoneType.
+ *for USA:1~11;
+ *      Japan:1~13;
+ *      Europe:1~13
+ * Return Value:
+ *               True:exceed;
+ *                False:normal case
+-*/
+static BOOL
+ChannelExceedZoneType(
+    IN PSDevice pDevice,
+    IN BYTE byCurrChannel
+    )
+{
+  BOOL exceed=FALSE;
+
+  switch(pDevice->byZoneType) {
+  	case 0x00:                  //USA:1~11
+                     if((byCurrChannel<1) ||(byCurrChannel>11))
+	                exceed = TRUE;
+	         break;
+	case 0x01:                  //Japan:1~13
+	case 0x02:                  //Europe:1~13
+                     if((byCurrChannel<1) ||(byCurrChannel>13))
+	                exceed = TRUE;
+	         break;
+	default:                    //reserve for other zonetype
+		break;
+  }
+
+  return exceed;
+}
+
+
+/*+
+ *
+ * Routine Description:
+ *   Handles and analysis incoming beacon frames.
+ *
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+static
+VOID
+s_vMgrRxBeacon(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PSRxMgmtPacket pRxPacket,
+    IN BOOL bInScan
+    )
+{
+
+    PKnownBSS           pBSSList;
+    WLAN_FR_BEACON      sFrame;
+    QWORD               qwTSFOffset;
+    BOOL                bIsBSSIDEqual = FALSE;
+    BOOL                bIsSSIDEqual = FALSE;
+    BOOL                bTSFLargeDiff = FALSE;
+    BOOL                bTSFOffsetPostive = FALSE;
+    BOOL                bUpdateTSF = FALSE;
+    BOOL                bIsAPBeacon = FALSE;
+    BOOL                bIsChannelEqual = FALSE;
+    UINT                uLocateByteIndex;
+    BYTE                byTIMBitOn = 0;
+    WORD                wAIDNumber = 0;
+    UINT                uNodeIndex;
+    QWORD               qwTimestamp, qwLocalTSF;
+    QWORD               qwCurrTSF;
+    WORD                wStartIndex = 0;
+    WORD                wAIDIndex = 0;
+    BYTE                byCurrChannel = pRxPacket->byRxChannel;
+    ERPObject           sERP;
+    UINT                uRateLen = WLAN_RATES_MAXLEN;
+    BOOL                bChannelHit = FALSE;
+    BOOL                bUpdatePhyParameter = FALSE;
+    BYTE                byIEChannel = 0;
+
+
+    memset(&sFrame, 0, sizeof(WLAN_FR_BEACON));
+    sFrame.len = pRxPacket->cbMPDULen;
+    sFrame.pBuf = (PBYTE)pRxPacket->p80211Header;
+
+    // decode the beacon frame
+    vMgrDecodeBeacon(&sFrame);
+
+    if ((sFrame.pwBeaconInterval == 0) ||
+        (sFrame.pwCapInfo == 0) ||
+        (sFrame.pSSID == 0) ||
+        (sFrame.pSuppRates == 0) ) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Rx beacon frame error\n");
+        return;
+    };
+
+
+    if (sFrame.pDSParms != NULL) {
+        if (byCurrChannel > CB_MAX_CHANNEL_24G) {
+            // channel remapping to
+            byIEChannel = CARDbyGetChannelMapping(pDevice, sFrame.pDSParms->byCurrChannel, PHY_TYPE_11A);
+        } else {
+            byIEChannel = sFrame.pDSParms->byCurrChannel;
+        }
+        if (byCurrChannel != byIEChannel) {
+            // adjust channel info. bcs we rcv adjcent channel pakckets
+            bChannelHit = FALSE;
+            byCurrChannel = byIEChannel;
+        }
+    } else {
+        // no DS channel info
+        bChannelHit = TRUE;
+    }
+//2008-0730-01<Add>by MikeLiu
+if(ChannelExceedZoneType(pDevice,byCurrChannel)==TRUE)
+      return;
+
+    if (sFrame.pERP != NULL) {
+        sERP.byERP = sFrame.pERP->byContext;
+        sERP.bERPExist = TRUE;
+
+    } else {
+        sERP.bERPExist = FALSE;
+        sERP.byERP = 0;
+    }
+
+    pBSSList = BSSpAddrIsInBSSList((HANDLE)pDevice, sFrame.pHdr->sA3.abyAddr3, sFrame.pSSID);
+    if (pBSSList == NULL) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Beacon/insert: RxChannel = : %d\n", byCurrChannel);
+        BSSbInsertToBSSList((HANDLE)pDevice,
+                            sFrame.pHdr->sA3.abyAddr3,
+                            *sFrame.pqwTimestamp,
+                            *sFrame.pwBeaconInterval,
+                            *sFrame.pwCapInfo,
+                            byCurrChannel,
+                            sFrame.pSSID,
+                            sFrame.pSuppRates,
+                            sFrame.pExtSuppRates,
+                            &sERP,
+                            sFrame.pRSN,
+                            sFrame.pRSNWPA,
+                            sFrame.pIE_Country,
+                            sFrame.pIE_Quiet,
+                            sFrame.len - WLAN_HDR_ADDR3_LEN,
+                            sFrame.pHdr->sA4.abyAddr4,   // payload of beacon
+                            (HANDLE)pRxPacket
+                           );
+    }
+    else {
+//        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"update bcn: RxChannel = : %d\n", byCurrChannel);
+        BSSbUpdateToBSSList((HANDLE)pDevice,
+                            *sFrame.pqwTimestamp,
+                            *sFrame.pwBeaconInterval,
+                            *sFrame.pwCapInfo,
+                            byCurrChannel,
+                            bChannelHit,
+                            sFrame.pSSID,
+                            sFrame.pSuppRates,
+                            sFrame.pExtSuppRates,
+                            &sERP,
+                            sFrame.pRSN,
+                            sFrame.pRSNWPA,
+                            sFrame.pIE_Country,
+                            sFrame.pIE_Quiet,
+                            pBSSList,
+                            sFrame.len - WLAN_HDR_ADDR3_LEN,
+                            sFrame.pHdr->sA4.abyAddr4,   // payload of probresponse
+                            (HANDLE)pRxPacket
+                           );
+
+    }
+
+    if (bInScan) {
+        return;
+    }
+
+    if(byCurrChannel == (BYTE)pMgmt->uCurrChannel)
+       bIsChannelEqual = TRUE;
+
+    if (bIsChannelEqual && (pMgmt->eCurrMode == WMAC_MODE_ESS_AP)) {
+
+        // if rx beacon without ERP field
+        if (sERP.bERPExist) {
+            if (WLAN_GET_ERP_USE_PROTECTION(sERP.byERP)){
+                pDevice->byERPFlag |= WLAN_SET_ERP_USE_PROTECTION(1);
+                pDevice->wUseProtectCntDown = USE_PROTECT_PERIOD;
+            }
+        }
+        else {
+            pDevice->byERPFlag |= WLAN_SET_ERP_USE_PROTECTION(1);
+            pDevice->wUseProtectCntDown = USE_PROTECT_PERIOD;
+        }
+
+        if (pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) {
+            if(!WLAN_GET_CAP_INFO_SHORTPREAMBLE(*sFrame.pwCapInfo))
+                pDevice->byERPFlag |= WLAN_SET_ERP_BARKER_MODE(1);
+            if(!sERP.bERPExist)
+                pDevice->byERPFlag |= WLAN_SET_ERP_NONERP_PRESENT(1);
+        }
+
+        // set to MAC&BBP
+        if (WLAN_GET_ERP_USE_PROTECTION(pDevice->byERPFlag)){
+            if (!pDevice->bProtectMode) {
+                 MACvEnableProtectMD(pDevice->PortOffset);
+                 pDevice->bProtectMode = TRUE;
+            }
+        }
+    }
+
+
+    if (pMgmt->eCurrMode == WMAC_MODE_ESS_AP)
+        return;
+
+    // check if BSSID the same
+    if (memcmp(sFrame.pHdr->sA3.abyAddr3,
+               pMgmt->abyCurrBSSID,
+               WLAN_BSSID_LEN) == 0) {
+
+        bIsBSSIDEqual = TRUE;
+
+// 2008-05-21 <add> by Richardtai
+        pDevice->uCurrRSSI = pRxPacket->uRSSI;
+        pDevice->byCurrSQ = pRxPacket->bySQ;
+
+        if (pMgmt->sNodeDBTable[0].uInActiveCount != 0) {
+            pMgmt->sNodeDBTable[0].uInActiveCount = 0;
+            //DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"BCN:Wake Count= [%d]\n", pMgmt->wCountToWakeUp);
+        }
+    }
+    // check if SSID the same
+    if (sFrame.pSSID->len == ((PWLAN_IE_SSID)pMgmt->abyCurrSSID)->len) {
+        if (memcmp(sFrame.pSSID->abySSID,
+                   ((PWLAN_IE_SSID)pMgmt->abyCurrSSID)->abySSID,
+                   sFrame.pSSID->len
+                   ) == 0) {
+            bIsSSIDEqual = TRUE;
+        };
+    }
+
+    if ((WLAN_GET_CAP_INFO_ESS(*sFrame.pwCapInfo)== TRUE) &&
+        (bIsBSSIDEqual == TRUE) &&
+        (bIsSSIDEqual == TRUE) &&
+        (pMgmt->eCurrMode == WMAC_MODE_ESS_STA) &&
+        (pMgmt->eCurrState == WMAC_STATE_ASSOC)) {
+        // add state check to prevent reconnect fail since we'll receive Beacon
+
+        bIsAPBeacon = TRUE;
+
+        if (pBSSList != NULL) {
+
+            // Compare PHY paramater setting
+            if (pMgmt->wCurrCapInfo != pBSSList->wCapInfo) {
+                bUpdatePhyParameter = TRUE;
+                pMgmt->wCurrCapInfo = pBSSList->wCapInfo;
+            }
+            if (sFrame.pERP != NULL) {
+                if ((sFrame.pERP->byElementID == WLAN_EID_ERP) &&
+                    (pMgmt->byERPContext != sFrame.pERP->byContext)) {
+                    bUpdatePhyParameter = TRUE;
+                    pMgmt->byERPContext = sFrame.pERP->byContext;
+                }
+            }
+            //
+            // Basic Rate Set may change dynamiclly
+            //
+            if (pBSSList->eNetworkTypeInUse == PHY_TYPE_11B) {
+                uRateLen = WLAN_RATES_MAXLEN_11B;
+            }
+            pMgmt->abyCurrSuppRates[1] = RATEuSetIE((PWLAN_IE_SUPP_RATES)pBSSList->abySuppRates,
+                                                    (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
+                                                    uRateLen);
+            pMgmt->abyCurrExtSuppRates[1] = RATEuSetIE((PWLAN_IE_SUPP_RATES)pBSSList->abyExtSuppRates,
+                                                    (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrExtSuppRates,
+                                                    uRateLen);
+            RATEvParseMaxRate( (PVOID)pDevice,
+                               (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
+                               (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrExtSuppRates,
+                               TRUE,
+                               &(pMgmt->sNodeDBTable[0].wMaxBasicRate),
+                               &(pMgmt->sNodeDBTable[0].wMaxSuppRate),
+                               &(pMgmt->sNodeDBTable[0].wSuppRate),
+                               &(pMgmt->sNodeDBTable[0].byTopCCKBasicRate),
+                               &(pMgmt->sNodeDBTable[0].byTopOFDMBasicRate)
+                              );
+#ifdef	PLICE_DEBUG
+		//printk("RxBeacon:MaxSuppRate is %d\n",pMgmt->sNodeDBTable[0].wMaxSuppRate);
+#endif
+			if (bUpdatePhyParameter == TRUE) {
+                CARDbSetPhyParameter( pMgmt->pAdapter,
+                                      pMgmt->eCurrentPHYMode,
+                                      pMgmt->wCurrCapInfo,
+                                      pMgmt->byERPContext,
+                                      pMgmt->abyCurrSuppRates,
+                                      pMgmt->abyCurrExtSuppRates
+                                      );
+            }
+            if (sFrame.pIE_PowerConstraint != NULL) {
+                CARDvSetPowerConstraint(pMgmt->pAdapter,
+                                        (BYTE) pBSSList->uChannel,
+                                        sFrame.pIE_PowerConstraint->byPower
+                                        );
+            }
+            if (sFrame.pIE_CHSW != NULL) {
+                CARDbChannelSwitch( pMgmt->pAdapter,
+                                    sFrame.pIE_CHSW->byMode,
+                                    CARDbyGetChannelMapping(pMgmt->pAdapter, sFrame.pIE_CHSW->byMode, pMgmt->eCurrentPHYMode),
+                                    sFrame.pIE_CHSW->byCount
+                                    );
+
+            } else if (bIsChannelEqual == FALSE) {
+                CARDbSetChannel(pMgmt->pAdapter, pBSSList->uChannel);
+            }
+        }
+    }
+
+//    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Beacon 2 \n");
+    // check if CF field exisit
+    if (WLAN_GET_CAP_INFO_ESS(*sFrame.pwCapInfo)) {
+        if (sFrame.pCFParms->wCFPDurRemaining > 0) {
+            // TODO: deal with CFP period to set NAV
+        };
+    };
+
+    HIDWORD(qwTimestamp) = cpu_to_le32(HIDWORD(*sFrame.pqwTimestamp));
+    LODWORD(qwTimestamp) = cpu_to_le32(LODWORD(*sFrame.pqwTimestamp));
+    HIDWORD(qwLocalTSF) = HIDWORD(pRxPacket->qwLocalTSF);
+    LODWORD(qwLocalTSF) = LODWORD(pRxPacket->qwLocalTSF);
+
+    // check if beacon TSF larger or small than our local TSF
+    if (HIDWORD(qwTimestamp) == HIDWORD(qwLocalTSF)) {
+        if (LODWORD(qwTimestamp) >= LODWORD(qwLocalTSF)) {
+            bTSFOffsetPostive = TRUE;
+        }
+        else {
+            bTSFOffsetPostive = FALSE;
+        }
+    }
+    else if (HIDWORD(qwTimestamp) > HIDWORD(qwLocalTSF)) {
+        bTSFOffsetPostive = TRUE;
+    }
+    else if (HIDWORD(qwTimestamp) < HIDWORD(qwLocalTSF)) {
+        bTSFOffsetPostive = FALSE;
+    };
+
+    if (bTSFOffsetPostive) {
+        qwTSFOffset = CARDqGetTSFOffset(pRxPacket->byRxRate, (qwTimestamp), (qwLocalTSF));
+    }
+    else {
+        qwTSFOffset = CARDqGetTSFOffset(pRxPacket->byRxRate, (qwLocalTSF), (qwTimestamp));
+    }
+
+    if (HIDWORD(qwTSFOffset) != 0 ||
+        (LODWORD(qwTSFOffset) > TRIVIAL_SYNC_DIFFERENCE )) {
+         bTSFLargeDiff = TRUE;
+    }
+
+
+    // if infra mode
+    if (bIsAPBeacon == TRUE) {
+
+        // Infra mode: Local TSF always follow AP's TSF if Difference huge.
+        if (bTSFLargeDiff)
+            bUpdateTSF = TRUE;
+
+        if ((pDevice->bEnablePSMode == TRUE) &&(sFrame.pTIM != 0)) {
+
+            // deal with DTIM, analysis TIM
+            pMgmt->bMulticastTIM = WLAN_MGMT_IS_MULTICAST_TIM(sFrame.pTIM->byBitMapCtl) ? TRUE : FALSE ;
+            pMgmt->byDTIMCount = sFrame.pTIM->byDTIMCount;
+            pMgmt->byDTIMPeriod = sFrame.pTIM->byDTIMPeriod;
+            wAIDNumber = pMgmt->wCurrAID & ~(BIT14|BIT15);
+
+            // check if AID in TIM field bit on
+            // wStartIndex = N1
+            wStartIndex = WLAN_MGMT_GET_TIM_OFFSET(sFrame.pTIM->byBitMapCtl) << 1;
+            // AIDIndex = N2
+            wAIDIndex = (wAIDNumber >> 3);
+            if ((wAIDNumber > 0) && (wAIDIndex >= wStartIndex)) {
+                uLocateByteIndex = wAIDIndex - wStartIndex;
+                // len = byDTIMCount + byDTIMPeriod + byDTIMPeriod + byVirtBitMap[0~250]
+                if (sFrame.pTIM->len >= (uLocateByteIndex + 4)) {
+                    byTIMBitOn  = (0x01) << ((wAIDNumber) % 8);
+                    pMgmt->bInTIM = sFrame.pTIM->byVirtBitMap[uLocateByteIndex] & byTIMBitOn ? TRUE : FALSE;
+                }
+                else {
+                    pMgmt->bInTIM = FALSE;
+                };
+            }
+            else {
+                pMgmt->bInTIM = FALSE;
+            };
+
+            if (pMgmt->bInTIM ||
+                (pMgmt->bMulticastTIM && (pMgmt->byDTIMCount == 0))) {
+                pMgmt->bInTIMWake = TRUE;
+                // send out ps-poll packet
+//                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "BCN:In TIM\n");
+                if (pMgmt->bInTIM) {
+                    PSvSendPSPOLL((PSDevice)pDevice);
+//                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "BCN:PS-POLL sent..\n");
+                };
+
+            }
+            else {
+                pMgmt->bInTIMWake = FALSE;
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "BCN: Not In TIM..\n");
+                if (pDevice->bPWBitOn == FALSE) {
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "BCN: Send Null Packet\n");
+                    if (PSbSendNullPacket(pDevice))
+                        pDevice->bPWBitOn = TRUE;
+                }
+                if(PSbConsiderPowerDown(pDevice, FALSE, FALSE)) {
+                   DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "BCN: Power down now...\n");
+                };
+            }
+
+        }
+
+    }
+    // if adhoc mode
+    if ((pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) && !bIsAPBeacon && bIsChannelEqual) {
+        if (bIsBSSIDEqual) {
+            // Use sNodeDBTable[0].uInActiveCount as IBSS beacons received count.
+		    if (pMgmt->sNodeDBTable[0].uInActiveCount != 0)
+		 	    pMgmt->sNodeDBTable[0].uInActiveCount = 0;
+
+            // adhoc mode:TSF updated only when beacon larger then local TSF
+            if (bTSFLargeDiff && bTSFOffsetPostive &&
+                (pMgmt->eCurrState == WMAC_STATE_JOINTED))
+                bUpdateTSF = TRUE;
+
+            // During dpc, already in spinlocked.
+            if (BSSDBbIsSTAInNodeDB(pMgmt, sFrame.pHdr->sA3.abyAddr2, &uNodeIndex)) {
+
+                // Update the STA, (Techically the Beacons of all the IBSS nodes
+		        // should be identical, but that's not happening in practice.
+                pMgmt->abyCurrSuppRates[1] = RATEuSetIE((PWLAN_IE_SUPP_RATES)sFrame.pSuppRates,
+                                                        (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
+                                                        WLAN_RATES_MAXLEN_11B);
+                RATEvParseMaxRate( (PVOID)pDevice,
+                                   (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
+                                   NULL,
+                                   TRUE,
+                                   &(pMgmt->sNodeDBTable[uNodeIndex].wMaxBasicRate),
+                                   &(pMgmt->sNodeDBTable[uNodeIndex].wMaxSuppRate),
+                                   &(pMgmt->sNodeDBTable[uNodeIndex].wSuppRate),
+                                   &(pMgmt->sNodeDBTable[uNodeIndex].byTopCCKBasicRate),
+                                   &(pMgmt->sNodeDBTable[uNodeIndex].byTopOFDMBasicRate)
+                                  );
+                pMgmt->sNodeDBTable[uNodeIndex].bShortPreamble = WLAN_GET_CAP_INFO_SHORTPREAMBLE(*sFrame.pwCapInfo);
+                pMgmt->sNodeDBTable[uNodeIndex].bShortSlotTime = WLAN_GET_CAP_INFO_SHORTSLOTTIME(*sFrame.pwCapInfo);
+                pMgmt->sNodeDBTable[uNodeIndex].uInActiveCount = 0;
+            }
+            else {
+                // Todo, initial Node content
+                BSSvCreateOneNode((PSDevice)pDevice, &uNodeIndex);
+
+                pMgmt->abyCurrSuppRates[1] = RATEuSetIE((PWLAN_IE_SUPP_RATES)sFrame.pSuppRates,
+                                                        (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
+                                                        WLAN_RATES_MAXLEN_11B);
+                RATEvParseMaxRate( (PVOID)pDevice,
+                                   (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
+                                   NULL,
+                                   TRUE,
+                                   &(pMgmt->sNodeDBTable[uNodeIndex].wMaxBasicRate),
+                                   &(pMgmt->sNodeDBTable[uNodeIndex].wMaxSuppRate),
+                                   &(pMgmt->sNodeDBTable[uNodeIndex].wSuppRate),
+                                   &(pMgmt->sNodeDBTable[uNodeIndex].byTopCCKBasicRate),
+                                   &(pMgmt->sNodeDBTable[uNodeIndex].byTopOFDMBasicRate)
+                                 );
+
+                memcpy(pMgmt->sNodeDBTable[uNodeIndex].abyMACAddr, sFrame.pHdr->sA3.abyAddr2, WLAN_ADDR_LEN);
+                pMgmt->sNodeDBTable[uNodeIndex].bShortPreamble = WLAN_GET_CAP_INFO_SHORTPREAMBLE(*sFrame.pwCapInfo);
+                pMgmt->sNodeDBTable[uNodeIndex].wTxDataRate = pMgmt->sNodeDBTable[uNodeIndex].wMaxSuppRate;
+#ifdef	PLICE_DEBUG
+		//if (uNodeIndex == 0)
+		{
+			printk("s_vMgrRxBeacon:TxDataRate is %d,Index is %d\n",pMgmt->sNodeDBTable[uNodeIndex].wTxDataRate,uNodeIndex);
+		}
+#endif
+/*
+                pMgmt->sNodeDBTable[uNodeIndex].bShortSlotTime = WLAN_GET_CAP_INFO_SHORTSLOTTIME(*sFrame.pwCapInfo);
+                if(pMgmt->sNodeDBTable[uNodeIndex].wMaxSuppRate > RATE_11M)
+                       pMgmt->sNodeDBTable[uNodeIndex].bERPExist = TRUE;
+*/
+            }
+
+            // if other stations jointed, indicate connect to upper layer..
+            if (pMgmt->eCurrState == WMAC_STATE_STARTED) {
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Current IBSS State: [Started]........to: [Jointed] \n");
+                pMgmt->eCurrState = WMAC_STATE_JOINTED;
+                pDevice->bLinkPass = TRUE;
+                if (netif_queue_stopped(pDevice->dev)){
+                    netif_wake_queue(pDevice->dev);
+                }
+                pMgmt->sNodeDBTable[0].bActive = TRUE;
+                pMgmt->sNodeDBTable[0].uInActiveCount = 0;
+
+            };
+        }
+        else if (bIsSSIDEqual) {
+
+            // See other adhoc sta with the same SSID but BSSID is different.
+            // adpot this vars only when TSF larger then us.
+            if (bTSFLargeDiff && bTSFOffsetPostive) {
+                 // we don't support ATIM under adhoc mode
+               // if ( sFrame.pIBSSParms->wATIMWindow == 0) {
+                     // adpot this vars
+                     // TODO: check sFrame cap if privacy on, and support rate syn
+                     memcpy(pMgmt->abyCurrBSSID, sFrame.pHdr->sA3.abyAddr3, WLAN_BSSID_LEN);
+                     memcpy(pDevice->abyBSSID, pMgmt->abyCurrBSSID, WLAN_BSSID_LEN);
+                     pMgmt->wCurrATIMWindow = cpu_to_le16(sFrame.pIBSSParms->wATIMWindow);
+                     pMgmt->wCurrBeaconPeriod = cpu_to_le16(*sFrame.pwBeaconInterval);
+                     pMgmt->abyCurrSuppRates[1] = RATEuSetIE((PWLAN_IE_SUPP_RATES)sFrame.pSuppRates,
+                                                      (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
+                                                      WLAN_RATES_MAXLEN_11B);
+                     // set HW beacon interval and re-synchronizing....
+                     DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Rejoining to Other Adhoc group with same SSID........\n");
+                     VNSvOutPortW(pDevice->PortOffset + MAC_REG_BI, pMgmt->wCurrBeaconPeriod);
+                     CARDbUpdateTSF(pDevice, pRxPacket->byRxRate, qwTimestamp, qwLocalTSF);
+                     CARDvUpdateNextTBTT(pDevice->PortOffset, qwTimestamp, pMgmt->wCurrBeaconPeriod);
+                     // Turn off bssid filter to avoid filter others adhoc station which bssid is different.
+                     MACvWriteBSSIDAddress(pDevice->PortOffset, pMgmt->abyCurrBSSID);
+
+                     CARDbSetPhyParameter (  pMgmt->pAdapter,
+                                            pMgmt->eCurrentPHYMode,
+                                            pMgmt->wCurrCapInfo,
+                                            pMgmt->byERPContext,
+                                            pMgmt->abyCurrSuppRates,
+                                            pMgmt->abyCurrExtSuppRates);
+
+
+                     // MACvRegBitsOff(pDevice->PortOffset, MAC_REG_RCR, RCR_BSSID);
+                     // set highest basic rate
+                     // s_vSetHighestBasicRate(pDevice, (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates);
+                     // Prepare beacon frame
+                     bMgrPrepareBeaconToSend((HANDLE)pDevice, pMgmt);
+              //  }
+            };
+        }
+    };
+    // endian issue ???
+    // Update TSF
+    if (bUpdateTSF) {
+        CARDbGetCurrentTSF(pDevice->PortOffset, &qwCurrTSF);
+        CARDbUpdateTSF(pDevice, pRxPacket->byRxRate, qwTimestamp, pRxPacket->qwLocalTSF);
+        CARDbGetCurrentTSF(pDevice->PortOffset, &qwCurrTSF);
+        CARDvUpdateNextTBTT(pDevice->PortOffset, qwTimestamp, pMgmt->wCurrBeaconPeriod);
+    }
+
+    return;
+}
+
+
+
+/*+
+ *
+ * Routine Description:
+ *   Instructs the hw to create a bss using the supplied
+ *   attributes. Note that this implementation only supports Ad-Hoc
+ *   BSS creation.
+ *
+ *
+ * Return Value:
+ *    CMD_STATUS
+ *
+-*/
+VOID
+vMgrCreateOwnIBSS(
+    IN  HANDLE hDeviceContext,
+    OUT PCMD_STATUS pStatus
+    )
+{
+    PSDevice            pDevice = (PSDevice)hDeviceContext;
+    PSMgmtObject        pMgmt = pDevice->pMgmt;
+    WORD                wMaxBasicRate;
+    WORD                wMaxSuppRate;
+    BYTE                byTopCCKBasicRate;
+    BYTE                byTopOFDMBasicRate;
+    QWORD               qwCurrTSF;
+    UINT                ii;
+    BYTE    abyRATE[] = {0x82, 0x84, 0x8B, 0x96, 0x24, 0x30, 0x48, 0x6C, 0x0C, 0x12, 0x18, 0x60};
+    BYTE    abyCCK_RATE[] = {0x82, 0x84, 0x8B, 0x96};
+    BYTE    abyOFDM_RATE[] = {0x0C, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C};
+    WORD                wSuppRate;
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Create Basic Service Set .......\n");
+
+    if (pMgmt->eConfigMode == WMAC_CONFIG_IBSS_STA) {
+        if ((pMgmt->eAuthenMode == WMAC_AUTH_WPANONE) &&
+            (pDevice->eEncryptionStatus != Ndis802_11Encryption2Enabled) &&
+            (pDevice->eEncryptionStatus != Ndis802_11Encryption3Enabled)) {
+            // encryption mode error
+            *pStatus = CMD_STATUS_FAILURE;
+            return;
+        }
+    }
+
+    pMgmt->abyCurrSuppRates[0] = WLAN_EID_SUPP_RATES;
+    pMgmt->abyCurrExtSuppRates[0] = WLAN_EID_EXTSUPP_RATES;
+
+    if (pMgmt->eConfigMode == WMAC_CONFIG_AP) {
+        pMgmt->eCurrentPHYMode = pMgmt->byAPBBType;
+    } else {
+        if (pDevice->byBBType == BB_TYPE_11G)
+            pMgmt->eCurrentPHYMode = PHY_TYPE_11G;
+        if (pDevice->byBBType == BB_TYPE_11B)
+            pMgmt->eCurrentPHYMode = PHY_TYPE_11B;
+        if (pDevice->byBBType == BB_TYPE_11A)
+            pMgmt->eCurrentPHYMode = PHY_TYPE_11A;
+    }
+
+    if (pMgmt->eCurrentPHYMode != PHY_TYPE_11A) {
+        pMgmt->abyCurrSuppRates[1] = WLAN_RATES_MAXLEN_11B;
+        pMgmt->abyCurrExtSuppRates[1] = 0;
+        for (ii = 0; ii < 4; ii++)
+            pMgmt->abyCurrSuppRates[2+ii] = abyRATE[ii];
+    } else {
+        pMgmt->abyCurrSuppRates[1] = 8;
+        pMgmt->abyCurrExtSuppRates[1] = 0;
+        for (ii = 0; ii < 8; ii++)
+            pMgmt->abyCurrSuppRates[2+ii] = abyRATE[ii];
+    }
+
+
+    if (pMgmt->eCurrentPHYMode == PHY_TYPE_11G) {
+        pMgmt->abyCurrSuppRates[1] = 8;
+        pMgmt->abyCurrExtSuppRates[1] = 4;
+        for (ii = 0; ii < 4; ii++)
+            pMgmt->abyCurrSuppRates[2+ii] =  abyCCK_RATE[ii];
+        for (ii = 4; ii < 8; ii++)
+            pMgmt->abyCurrSuppRates[2+ii] =  abyOFDM_RATE[ii-4];
+        for (ii = 0; ii < 4; ii++)
+            pMgmt->abyCurrExtSuppRates[2+ii] =  abyOFDM_RATE[ii+4];
+    }
+
+
+    // Disable Protect Mode
+    pDevice->bProtectMode = 0;
+    MACvDisableProtectMD(pDevice->PortOffset);
+
+    pDevice->bBarkerPreambleMd = 0;
+    MACvDisableBarkerPreambleMd(pDevice->PortOffset);
+
+    // Kyle Test 2003.11.04
+
+    // set HW beacon interval
+    if (pMgmt->wIBSSBeaconPeriod == 0)
+        pMgmt->wIBSSBeaconPeriod = DEFAULT_IBSS_BI;
+
+
+    CARDbGetCurrentTSF(pDevice->PortOffset, &qwCurrTSF);
+    // clear TSF counter
+    VNSvOutPortB(pDevice->PortOffset + MAC_REG_TFTCTL, TFTCTL_TSFCNTRST);
+    // enable TSF counter
+    VNSvOutPortB(pDevice->PortOffset + MAC_REG_TFTCTL, TFTCTL_TSFCNTREN);
+
+    // set Next TBTT
+    CARDvSetFirstNextTBTT(pDevice->PortOffset, pMgmt->wIBSSBeaconPeriod);
+
+    pMgmt->uIBSSChannel = pDevice->uChannel;
+
+    if (pMgmt->uIBSSChannel == 0)
+        pMgmt->uIBSSChannel = DEFAULT_IBSS_CHANNEL;
+
+
+    // set basic rate
+
+    RATEvParseMaxRate((PVOID)pDevice, (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
+                      (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrExtSuppRates, TRUE,
+                      &wMaxBasicRate, &wMaxSuppRate, &wSuppRate,
+                      &byTopCCKBasicRate, &byTopOFDMBasicRate);
+
+
+    if (pMgmt->eConfigMode == WMAC_CONFIG_AP) {
+        pMgmt->eCurrMode = WMAC_MODE_ESS_AP;
+    }
+
+    if (pMgmt->eConfigMode == WMAC_CONFIG_IBSS_STA) {
+        MEMvCopy(pMgmt->abyIBSSDFSOwner, pDevice->abyCurrentNetAddr, 6);
+        pMgmt->byIBSSDFSRecovery = 10;
+        pMgmt->eCurrMode = WMAC_MODE_IBSS_STA;
+    }
+
+    // Adopt pre-configured IBSS vars to current vars
+    pMgmt->eCurrState = WMAC_STATE_STARTED;
+    pMgmt->wCurrBeaconPeriod = pMgmt->wIBSSBeaconPeriod;
+    pMgmt->uCurrChannel = pMgmt->uIBSSChannel;
+    pMgmt->wCurrATIMWindow = pMgmt->wIBSSATIMWindow;
+    MACvWriteATIMW(pDevice->PortOffset, pMgmt->wCurrATIMWindow);
+    pDevice->uCurrRSSI = 0;
+    pDevice->byCurrSQ = 0;
+    //memcpy(pMgmt->abyDesireSSID,pMgmt->abyAdHocSSID,
+                     // ((PWLAN_IE_SSID)pMgmt->abyAdHocSSID)->len + WLAN_IEHDR_LEN);
+    memset(pMgmt->abyCurrSSID, 0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
+    memcpy(pMgmt->abyCurrSSID,
+           pMgmt->abyDesireSSID,
+           ((PWLAN_IE_SSID)pMgmt->abyDesireSSID)->len + WLAN_IEHDR_LEN
+          );
+
+    if (pMgmt->eCurrMode == WMAC_MODE_ESS_AP) {
+        // AP mode BSSID = MAC addr
+        memcpy(pMgmt->abyCurrBSSID, pMgmt->abyMACAddr, WLAN_ADDR_LEN);
+        DEVICE_PRT(MSG_LEVEL_INFO, KERN_INFO"AP beacon created BSSID:%02x-%02x-%02x-%02x-%02x-%02x \n",
+                      pMgmt->abyCurrBSSID[0],
+                      pMgmt->abyCurrBSSID[1],
+                      pMgmt->abyCurrBSSID[2],
+                      pMgmt->abyCurrBSSID[3],
+                      pMgmt->abyCurrBSSID[4],
+                      pMgmt->abyCurrBSSID[5]
+                    );
+    }
+
+    if (pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) {
+
+        // BSSID selected must be randomized as spec 11.1.3
+        pMgmt->abyCurrBSSID[5] = (BYTE) (LODWORD(qwCurrTSF)& 0x000000ff);
+        pMgmt->abyCurrBSSID[4] = (BYTE)((LODWORD(qwCurrTSF)& 0x0000ff00) >> 8);
+        pMgmt->abyCurrBSSID[3] = (BYTE)((LODWORD(qwCurrTSF)& 0x00ff0000) >> 16);
+        pMgmt->abyCurrBSSID[2] = (BYTE)((LODWORD(qwCurrTSF)& 0x00000ff0) >> 4);
+        pMgmt->abyCurrBSSID[1] = (BYTE)((LODWORD(qwCurrTSF)& 0x000ff000) >> 12);
+        pMgmt->abyCurrBSSID[0] = (BYTE)((LODWORD(qwCurrTSF)& 0x0ff00000) >> 20);
+        pMgmt->abyCurrBSSID[5] ^= pMgmt->abyMACAddr[0];
+        pMgmt->abyCurrBSSID[4] ^= pMgmt->abyMACAddr[1];
+        pMgmt->abyCurrBSSID[3] ^= pMgmt->abyMACAddr[2];
+        pMgmt->abyCurrBSSID[2] ^= pMgmt->abyMACAddr[3];
+        pMgmt->abyCurrBSSID[1] ^= pMgmt->abyMACAddr[4];
+        pMgmt->abyCurrBSSID[0] ^= pMgmt->abyMACAddr[5];
+        pMgmt->abyCurrBSSID[0] &= ~IEEE_ADDR_GROUP;
+        pMgmt->abyCurrBSSID[0] |= IEEE_ADDR_UNIVERSAL;
+
+
+        DEVICE_PRT(MSG_LEVEL_INFO, KERN_INFO"Adhoc beacon created bssid:%02x-%02x-%02x-%02x-%02x-%02x \n",
+                      pMgmt->abyCurrBSSID[0],
+                      pMgmt->abyCurrBSSID[1],
+                      pMgmt->abyCurrBSSID[2],
+                      pMgmt->abyCurrBSSID[3],
+                      pMgmt->abyCurrBSSID[4],
+                      pMgmt->abyCurrBSSID[5]
+                    );
+    }
+
+    // Set Capability Info
+    pMgmt->wCurrCapInfo = 0;
+
+    if (pMgmt->eCurrMode == WMAC_MODE_ESS_AP) {
+        pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_ESS(1);
+        pMgmt->byDTIMPeriod = DEFAULT_DTIM_PERIOD;
+        pMgmt->byDTIMCount = pMgmt->byDTIMPeriod - 1;
+    }
+
+    if (pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) {
+        pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_IBSS(1);
+    }
+
+    if (pDevice->bEncryptionEnable) {
+        pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_PRIVACY(1);
+        if (pMgmt->eAuthenMode == WMAC_AUTH_WPANONE) {
+            if (pDevice->eEncryptionStatus == Ndis802_11Encryption3Enabled) {
+                pMgmt->byCSSPK = KEY_CTL_CCMP;
+                pMgmt->byCSSGK = KEY_CTL_CCMP;
+            } else if (pDevice->eEncryptionStatus == Ndis802_11Encryption2Enabled) {
+                pMgmt->byCSSPK = KEY_CTL_TKIP;
+                pMgmt->byCSSGK = KEY_CTL_TKIP;
+            } else {
+                pMgmt->byCSSPK = KEY_CTL_NONE;
+                pMgmt->byCSSGK = KEY_CTL_WEP;
+            }
+        } else {
+            pMgmt->byCSSPK = KEY_CTL_WEP;
+            pMgmt->byCSSGK = KEY_CTL_WEP;
+        }
+    };
+
+    pMgmt->byERPContext = 0;
+
+//    memcpy(pDevice->abyBSSID, pMgmt->abyCurrBSSID, WLAN_BSSID_LEN);
+
+    if (pMgmt->eConfigMode == WMAC_CONFIG_AP) {
+        CARDbSetBSSID(pMgmt->pAdapter, pMgmt->abyCurrBSSID, OP_MODE_AP);
+    } else {
+        CARDbSetBSSID(pMgmt->pAdapter, pMgmt->abyCurrBSSID, OP_MODE_ADHOC);
+    }
+
+    CARDbSetPhyParameter(   pMgmt->pAdapter,
+                            pMgmt->eCurrentPHYMode,
+                            pMgmt->wCurrCapInfo,
+                            pMgmt->byERPContext,
+                            pMgmt->abyCurrSuppRates,
+                            pMgmt->abyCurrExtSuppRates
+                            );
+
+    CARDbSetBeaconPeriod(pMgmt->pAdapter, pMgmt->wIBSSBeaconPeriod);
+    // set channel and clear NAV
+    CARDbSetChannel(pMgmt->pAdapter, pMgmt->uIBSSChannel);
+    pMgmt->uCurrChannel = pMgmt->uIBSSChannel;
+
+    if (CARDbIsShortPreamble(pMgmt->pAdapter)) {
+        pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_SHORTPREAMBLE(1);
+    } else {
+        pMgmt->wCurrCapInfo &= (~WLAN_SET_CAP_INFO_SHORTPREAMBLE(1));
+    }
+
+    if ((pMgmt->b11hEnable == TRUE) &&
+        (pMgmt->eCurrentPHYMode == PHY_TYPE_11A)) {
+        pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_SPECTRUMMNG(1);
+    } else {
+        pMgmt->wCurrCapInfo &= (~WLAN_SET_CAP_INFO_SPECTRUMMNG(1));
+    }
+
+    pMgmt->eCurrState = WMAC_STATE_STARTED;
+    // Prepare beacon to send
+    if (bMgrPrepareBeaconToSend((HANDLE)pDevice, pMgmt)) {
+        *pStatus = CMD_STATUS_SUCCESS;
+    }
+
+    return ;
+}
+
+
+
+/*+
+ *
+ * Routine Description:
+ *   Instructs wmac to join a bss using the supplied attributes.
+ *   The arguments may the BSSID or SSID and the rest of the
+ *   attributes are obtained from the scan result of known bss list.
+ *
+ *
+ * Return Value:
+ *    None.
+ *
+-*/
+
+VOID
+vMgrJoinBSSBegin(
+    IN  HANDLE hDeviceContext,
+    OUT PCMD_STATUS pStatus
+    )
+{
+
+    PSDevice     pDevice = (PSDevice)hDeviceContext;
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+    PKnownBSS       pCurr = NULL;
+    UINT            ii, uu;
+    PWLAN_IE_SUPP_RATES pItemRates = NULL;
+    PWLAN_IE_SUPP_RATES pItemExtRates = NULL;
+    PWLAN_IE_SSID   pItemSSID;
+    UINT            uRateLen = WLAN_RATES_MAXLEN;
+    WORD            wMaxBasicRate = RATE_1M;
+    WORD            wMaxSuppRate = RATE_1M;
+    WORD            wSuppRate;
+    BYTE            byTopCCKBasicRate = RATE_1M;
+    BYTE            byTopOFDMBasicRate = RATE_1M;
+
+
+    for (ii = 0; ii < MAX_BSS_NUM; ii++) {
+        if (pMgmt->sBSSList[ii].bActive == TRUE)
+            break;
+    }
+
+    if (ii == MAX_BSS_NUM) {
+       *pStatus = CMD_STATUS_RESOURCES;
+        DEVICE_PRT(MSG_LEVEL_NOTICE, KERN_INFO "BSS finding:BSS list is empty.\n");
+       return;
+    };
+
+    // memset(pMgmt->abyDesireBSSID, 0,  WLAN_BSSID_LEN);
+    // Search known BSS list for prefer BSSID or SSID
+
+    pCurr = BSSpSearchBSSList(pDevice,
+                              pMgmt->abyDesireBSSID,
+                              pMgmt->abyDesireSSID,
+                              pMgmt->eConfigPHYMode
+                              );
+
+    if (pCurr == NULL){
+       *pStatus = CMD_STATUS_RESOURCES;
+       pItemSSID = (PWLAN_IE_SSID)pMgmt->abyDesireSSID;
+       DEVICE_PRT(MSG_LEVEL_NOTICE, KERN_INFO "Scanning [%s] not found, disconnected !\n", pItemSSID->abySSID);
+       return;
+    };
+
+    DEVICE_PRT(MSG_LEVEL_NOTICE, KERN_INFO "AP(BSS) finding:Found a AP(BSS)..\n");
+    if (WLAN_GET_CAP_INFO_ESS(cpu_to_le16(pCurr->wCapInfo))){
+
+        if ((pMgmt->eAuthenMode == WMAC_AUTH_WPA)||(pMgmt->eAuthenMode == WMAC_AUTH_WPAPSK)) {
+
+    // patch for CISCO migration mode
+/*
+            if (pDevice->eEncryptionStatus == Ndis802_11Encryption2Enabled) {
+                if (WPA_SearchRSN(0, WPA_TKIP, pCurr) == FALSE) {
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"No match RSN info. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\n");
+                    // encryption mode error
+                    pMgmt->eCurrState = WMAC_STATE_IDLE;
+                    return;
+                }
+            } else if (pDevice->eEncryptionStatus == Ndis802_11Encryption3Enabled) {
+                if (WPA_SearchRSN(0, WPA_AESCCMP, pCurr) == FALSE) {
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"No match RSN info. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\n");
+                    // encryption mode error
+                    pMgmt->eCurrState = WMAC_STATE_IDLE;
+                    return;
+                }
+            }
+*/
+        }
+
+#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+	//if(pDevice->bWPASuppWextEnabled == TRUE)
+            Encyption_Rebuild(pDevice, pCurr);
+#endif
+        // Infrastructure BSS
+        s_vMgrSynchBSS(pDevice,
+                       WMAC_MODE_ESS_STA,
+                       pCurr,
+                       pStatus
+                       );
+
+        if (*pStatus == CMD_STATUS_SUCCESS){
+
+            // Adopt this BSS state vars in Mgmt Object
+            pMgmt->uCurrChannel = pCurr->uChannel;
+
+            memset(pMgmt->abyCurrSuppRates, 0 , WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1);
+            memset(pMgmt->abyCurrExtSuppRates, 0 , WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1);
+
+            if (pCurr->eNetworkTypeInUse == PHY_TYPE_11B) {
+                uRateLen = WLAN_RATES_MAXLEN_11B;
+            }
+
+            pItemRates = (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates;
+            pItemExtRates = (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrExtSuppRates;
+
+            // Parse Support Rate IE
+            pItemRates->byElementID = WLAN_EID_SUPP_RATES;
+            pItemRates->len = RATEuSetIE((PWLAN_IE_SUPP_RATES)pCurr->abySuppRates,
+                                         pItemRates,
+                                         uRateLen);
+
+            // Parse Extension Support Rate IE
+            pItemExtRates->byElementID = WLAN_EID_EXTSUPP_RATES;
+            pItemExtRates->len = RATEuSetIE((PWLAN_IE_SUPP_RATES)pCurr->abyExtSuppRates,
+                                            pItemExtRates,
+                                            uRateLen);
+            // Stuffing Rate IE
+            if ((pItemExtRates->len > 0) && (pItemRates->len < 8)) {
+                for (ii = 0; ii < (UINT)(8 - pItemRates->len); ) {
+                    pItemRates->abyRates[pItemRates->len + ii] = pItemExtRates->abyRates[ii];
+                    ii ++;
+                    if (pItemExtRates->len <= ii)
+                        break;
+                }
+                pItemRates->len += (BYTE)ii;
+                if (pItemExtRates->len - ii > 0) {
+                    pItemExtRates->len -= (BYTE)ii;
+                    for (uu = 0; uu < pItemExtRates->len; uu ++) {
+                        pItemExtRates->abyRates[uu] = pItemExtRates->abyRates[uu + ii];
+                    }
+                } else {
+                    pItemExtRates->len = 0;
+                }
+            }
+
+            RATEvParseMaxRate((PVOID)pDevice, pItemRates, pItemExtRates, TRUE,
+                              &wMaxBasicRate, &wMaxSuppRate, &wSuppRate,
+                              &byTopCCKBasicRate, &byTopOFDMBasicRate);
+
+            // TODO: deal with if wCapInfo the privacy is on, but station WEP is off
+            // TODO: deal with if wCapInfo the PS-Pollable is on.
+            pMgmt->wCurrBeaconPeriod = pCurr->wBeaconInterval;
+            memset(pMgmt->abyCurrSSID, 0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
+            memcpy(pMgmt->abyCurrBSSID, pCurr->abyBSSID, WLAN_BSSID_LEN);
+            memcpy(pMgmt->abyCurrSSID, pCurr->abySSID, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
+
+            pMgmt->eCurrMode = WMAC_MODE_ESS_STA;
+
+            pMgmt->eCurrState = WMAC_STATE_JOINTED;
+            // Adopt BSS state in Adapter Device Object
+            //pDevice->byOpMode = OP_MODE_INFRASTRUCTURE;
+//            memcpy(pDevice->abyBSSID, pCurr->abyBSSID, WLAN_BSSID_LEN);
+
+            // Add current BSS to Candidate list
+            // This should only works for WPA2 BSS, and WPA2 BSS check must be done before.
+            if (pMgmt->eAuthenMode == WMAC_AUTH_WPA2) {
+                BOOL bResult = bAdd_PMKID_Candidate((HANDLE)pDevice, pMgmt->abyCurrBSSID, &pCurr->sRSNCapObj);
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"bAdd_PMKID_Candidate: 1(%d)\n", bResult);
+                if (bResult == FALSE) {
+                    vFlush_PMKID_Candidate((HANDLE)pDevice);
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"vFlush_PMKID_Candidate: 4\n");
+                    bAdd_PMKID_Candidate((HANDLE)pDevice, pMgmt->abyCurrBSSID, &pCurr->sRSNCapObj);
+                }
+            }
+
+            // Preamble type auto-switch: if AP can receive short-preamble cap,
+            // we can turn on too.
+
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Join ESS\n");
+
+
+
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"End of Join AP -- A/B/G Action\n");
+        }
+        else {
+            pMgmt->eCurrState = WMAC_STATE_IDLE;
+        };
+
+
+     }
+     else {
+        // ad-hoc mode BSS
+        if (pMgmt->eAuthenMode == WMAC_AUTH_WPANONE) {
+
+            if (pDevice->eEncryptionStatus == Ndis802_11Encryption2Enabled) {
+                if (WPA_SearchRSN(0, WPA_TKIP, pCurr) == FALSE) {
+                    // encryption mode error
+                    pMgmt->eCurrState = WMAC_STATE_IDLE;
+                    return;
+                }
+            } else if (pDevice->eEncryptionStatus == Ndis802_11Encryption3Enabled) {
+                if (WPA_SearchRSN(0, WPA_AESCCMP, pCurr) == FALSE) {
+                    // encryption mode error
+                    pMgmt->eCurrState = WMAC_STATE_IDLE;
+                    return;
+                }
+            } else {
+                // encryption mode error
+                pMgmt->eCurrState = WMAC_STATE_IDLE;
+                return;
+            }
+        }
+
+        s_vMgrSynchBSS(pDevice,
+                       WMAC_MODE_IBSS_STA,
+                       pCurr,
+                       pStatus
+                       );
+
+        if (*pStatus == CMD_STATUS_SUCCESS){
+            // Adopt this BSS state vars in Mgmt Object
+            // TODO: check if CapInfo privacy on, but we don't..
+            pMgmt->uCurrChannel = pCurr->uChannel;
+
+
+            // Parse Support Rate IE
+            pMgmt->abyCurrSuppRates[0] = WLAN_EID_SUPP_RATES;
+            pMgmt->abyCurrSuppRates[1] = RATEuSetIE((PWLAN_IE_SUPP_RATES)pCurr->abySuppRates,
+                                                    (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
+                                                    WLAN_RATES_MAXLEN_11B);
+            // set basic rate
+            RATEvParseMaxRate((PVOID)pDevice, (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
+                              NULL, TRUE, &wMaxBasicRate, &wMaxSuppRate, &wSuppRate,
+                              &byTopCCKBasicRate, &byTopOFDMBasicRate);
+
+            pMgmt->wCurrCapInfo = pCurr->wCapInfo;
+            pMgmt->wCurrBeaconPeriod = pCurr->wBeaconInterval;
+            memset(pMgmt->abyCurrSSID, 0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN);
+            memcpy(pMgmt->abyCurrBSSID, pCurr->abyBSSID, WLAN_BSSID_LEN);
+            memcpy(pMgmt->abyCurrSSID, pCurr->abySSID, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN);
+//          pMgmt->wCurrATIMWindow = pCurr->wATIMWindow;
+            MACvWriteATIMW(pDevice->PortOffset, pMgmt->wCurrATIMWindow);
+            pMgmt->eCurrMode = WMAC_MODE_IBSS_STA;
+
+            pMgmt->eCurrState = WMAC_STATE_STARTED;
+            // Adopt BSS state in Adapter Device Object
+            //pDevice->byOpMode = OP_MODE_ADHOC;
+//            pDevice->bLinkPass = TRUE;
+//            memcpy(pDevice->abyBSSID, pCurr->abyBSSID, WLAN_BSSID_LEN);
+
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Join IBSS ok:%02x-%02x-%02x-%02x-%02x-%02x \n",
+                  pMgmt->abyCurrBSSID[0],
+                  pMgmt->abyCurrBSSID[1],
+                  pMgmt->abyCurrBSSID[2],
+                  pMgmt->abyCurrBSSID[3],
+                  pMgmt->abyCurrBSSID[4],
+                  pMgmt->abyCurrBSSID[5]
+                );
+            // Preamble type auto-switch: if AP can receive short-preamble cap,
+            // and if registry setting is short preamble we can turn on too.
+
+            // Prepare beacon
+            bMgrPrepareBeaconToSend((HANDLE)pDevice, pMgmt);
+        }
+        else {
+            pMgmt->eCurrState = WMAC_STATE_IDLE;
+        };
+     };
+    return;
+}
+
+
+
+/*+
+ *
+ * Routine Description:
+ * Set HW to synchronize a specific BSS from known BSS list.
+ *
+ *
+ * Return Value:
+ *    PCM_STATUS
+ *
+-*/
+static
+VOID
+s_vMgrSynchBSS (
+    IN PSDevice      pDevice,
+    IN UINT          uBSSMode,
+    IN PKnownBSS     pCurr,
+    OUT PCMD_STATUS  pStatus
+    )
+{
+    CARD_PHY_TYPE   ePhyType = PHY_TYPE_11B;
+    PSMgmtObject  pMgmt = pDevice->pMgmt;
+//    int     ii;
+                                                     //1M,   2M,   5M,   11M,  18M,  24M,  36M,  54M
+    BYTE abyCurrSuppRatesG[] = {WLAN_EID_SUPP_RATES, 8, 0x02, 0x04, 0x0B, 0x16, 0x24, 0x30, 0x48, 0x6C};
+    BYTE abyCurrExtSuppRatesG[] = {WLAN_EID_EXTSUPP_RATES, 4, 0x0C, 0x12, 0x18, 0x60};
+                                                           //6M,   9M,   12M,  48M
+    BYTE abyCurrSuppRatesA[] = {WLAN_EID_SUPP_RATES, 8, 0x0C, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C};
+    BYTE abyCurrSuppRatesB[] = {WLAN_EID_SUPP_RATES, 4, 0x02, 0x04, 0x0B, 0x16};
+
+
+    *pStatus = CMD_STATUS_FAILURE;
+
+    if (s_bCipherMatch(pCurr,
+                       pDevice->eEncryptionStatus,
+                       &(pMgmt->byCSSPK),
+                       &(pMgmt->byCSSGK)) == FALSE) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "s_bCipherMatch Fail .......\n");
+        return;
+    }
+
+    pMgmt->pCurrBSS = pCurr;
+
+    // if previous mode is IBSS.
+    if(pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) {
+        MACvRegBitsOff(pDevice->PortOffset, MAC_REG_BCNDMACTL, BEACON_READY);
+        MACvRegBitsOff(pDevice->PortOffset, MAC_REG_TCR, TCR_AUTOBCNTX);
+    }
+
+    // Init the BSS informations
+    pDevice->bCCK = TRUE;
+    pDevice->bProtectMode = FALSE;
+    MACvDisableProtectMD(pDevice->PortOffset);
+    pDevice->bBarkerPreambleMd = FALSE;
+    MACvDisableBarkerPreambleMd(pDevice->PortOffset);
+    pDevice->bNonERPPresent = FALSE;
+    pDevice->byPreambleType = 0;
+    pDevice->wBasicRate = 0;
+    // Set Basic Rate
+    CARDbAddBasicRate((PVOID)pDevice, RATE_1M);
+    // calculate TSF offset
+    // TSF Offset = Received Timestamp TSF - Marked Local's TSF
+    CARDbUpdateTSF(pDevice, pCurr->byRxRate, pCurr->qwBSSTimestamp, pCurr->qwLocalTSF);
+
+    CARDbSetBeaconPeriod(pDevice, pCurr->wBeaconInterval);
+
+    // set Next TBTT
+    // Next TBTT = ((local_current_TSF / beacon_interval) + 1 ) * beacon_interval
+    CARDvSetFirstNextTBTT(pDevice->PortOffset, pCurr->wBeaconInterval);
+
+    // set BSSID
+    MACvWriteBSSIDAddress(pDevice->PortOffset, pCurr->abyBSSID);
+
+    MACvReadBSSIDAddress(pDevice->PortOffset, pMgmt->abyCurrBSSID);
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Sync:set CurrBSSID address = %02x-%02x-%02x=%02x-%02x-%02x\n",
+        pMgmt->abyCurrBSSID[0],
+        pMgmt->abyCurrBSSID[1],
+        pMgmt->abyCurrBSSID[2],
+        pMgmt->abyCurrBSSID[3],
+        pMgmt->abyCurrBSSID[4],
+        pMgmt->abyCurrBSSID[5]);
+
+    if (pCurr->eNetworkTypeInUse == PHY_TYPE_11A) {
+        if ((pMgmt->eConfigPHYMode == PHY_TYPE_11A) ||
+            (pMgmt->eConfigPHYMode == PHY_TYPE_AUTO)) {
+            ePhyType = PHY_TYPE_11A;
+        } else {
+            return;
+        }
+    } else if (pCurr->eNetworkTypeInUse == PHY_TYPE_11B) {
+        if ((pMgmt->eConfigPHYMode == PHY_TYPE_11B) ||
+            (pMgmt->eConfigPHYMode == PHY_TYPE_11G) ||
+            (pMgmt->eConfigPHYMode == PHY_TYPE_AUTO)) {
+            ePhyType = PHY_TYPE_11B;
+        } else {
+            return;
+        }
+    } else {
+        if ((pMgmt->eConfigPHYMode == PHY_TYPE_11G) ||
+            (pMgmt->eConfigPHYMode == PHY_TYPE_AUTO)) {
+            ePhyType = PHY_TYPE_11G;
+        } else if (pMgmt->eConfigPHYMode == PHY_TYPE_11B) {
+            ePhyType = PHY_TYPE_11B;
+        } else {
+            return;
+        }
+    }
+
+    if (ePhyType == PHY_TYPE_11A) {
+        MEMvCopy(pMgmt->abyCurrSuppRates, &abyCurrSuppRatesA[0], sizeof(abyCurrSuppRatesA));
+        pMgmt->abyCurrExtSuppRates[1] = 0;
+    } else if (ePhyType == PHY_TYPE_11B) {
+        MEMvCopy(pMgmt->abyCurrSuppRates, &abyCurrSuppRatesB[0], sizeof(abyCurrSuppRatesB));
+        pMgmt->abyCurrExtSuppRates[1] = 0;
+    } else {
+        MEMvCopy(pMgmt->abyCurrSuppRates, &abyCurrSuppRatesG[0], sizeof(abyCurrSuppRatesG));
+        MEMvCopy(pMgmt->abyCurrExtSuppRates, &abyCurrExtSuppRatesG[0], sizeof(abyCurrExtSuppRatesG));
+    }
+
+
+    if (WLAN_GET_CAP_INFO_ESS(pCurr->wCapInfo)) {
+        CARDbSetBSSID(pMgmt->pAdapter, pCurr->abyBSSID, OP_MODE_INFRASTRUCTURE);
+        // Add current BSS to Candidate list
+        // This should only works for WPA2 BSS, and WPA2 BSS check must be done before.
+        if (pMgmt->eAuthenMode == WMAC_AUTH_WPA2) {
+            CARDbAdd_PMKID_Candidate(pMgmt->pAdapter, pMgmt->abyCurrBSSID, pCurr->sRSNCapObj.bRSNCapExist, pCurr->sRSNCapObj.wRSNCap);
+        }
+    } else {
+        CARDbSetBSSID(pMgmt->pAdapter, pCurr->abyBSSID, OP_MODE_ADHOC);
+    }
+
+    if (CARDbSetPhyParameter(   pMgmt->pAdapter,
+                                ePhyType,
+                                pCurr->wCapInfo,
+                                pCurr->sERP.byERP,
+                                pMgmt->abyCurrSuppRates,
+                                pMgmt->abyCurrExtSuppRates
+                            ) != TRUE) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "<----s_bSynchBSS Set Phy Mode Fail [%d]\n", ePhyType);
+        return;
+    }
+    // set channel and clear NAV
+    if (CARDbSetChannel(pMgmt->pAdapter, pCurr->uChannel) == FALSE) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "<----s_bSynchBSS Set Channel [%d]\n", pCurr->uChannel);
+        return;
+    }
+
+/*
+    for (ii=0;ii<BB_VGA_LEVEL;ii++) {
+        if (pCurr->ldBmMAX< pDevice->ldBmThreshold[ii]) {
+            pDevice->byBBVGANew = pDevice->abyBBVGA[ii];
+            break;
+        }
+    }
+
+    if (pDevice->byBBVGANew != pDevice->byBBVGACurrent) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"RSSI[%d] NewGain[%d] OldGain[%d] \n",
+                        (int)pCurr->ldBmMAX, pDevice->byBBVGANew, pDevice->byBBVGACurrent);
+        printk("RSSI[%d] NewGain[%d] OldGain[%d] \n",
+                        (int)pCurr->ldBmMAX, pDevice->byBBVGANew, pDevice->byBBVGACurrent);
+        BBvSetVGAGainOffset(pDevice, pDevice->byBBVGANew);
+    }
+    printk("ldBmMAX[%d] NewGain[%d] OldGain[%d] \n",
+           (int)pCurr->ldBmMAX, pDevice->byBBVGANew, pDevice->byBBVGACurrent);
+*/
+    pMgmt->uCurrChannel = pCurr->uChannel;
+    pMgmt->eCurrentPHYMode = ePhyType;
+    pMgmt->byERPContext = pCurr->sERP.byERP;
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Sync:Set to channel = [%d]\n", (INT)pCurr->uChannel);
+
+
+    *pStatus = CMD_STATUS_SUCCESS;
+
+
+    return;
+};
+
+//mike add: fix NetworkManager 0.7.0 hidden ssid mode in WPA encryption
+//                   ,need reset eAuthenMode and eEncryptionStatus
+ static VOID  Encyption_Rebuild(
+    IN PSDevice pDevice,
+    IN PKnownBSS pCurr
+ )
+ {
+  PSMgmtObject  pMgmt = &(pDevice->sMgmtObj);
+ // UINT            ii , uSameBssidNum=0;
+
+        //  for (ii = 0; ii < MAX_BSS_NUM; ii++) {
+          //   if (pMgmt->sBSSList[ii].bActive &&
+            //      IS_ETH_ADDRESS_EQUAL(pMgmt->sBSSList[ii].abyBSSID, pCurr->abyBSSID)) {
+             //       uSameBssidNum++;
+               //   }
+           // }
+  //   if( uSameBssidNum>=2) {	 //we only check AP in hidden sssid  mode
+        if ((pMgmt->eAuthenMode == WMAC_AUTH_WPAPSK) ||           //networkmanager 0.7.0 does not give the pairwise-key selsection,
+             (pMgmt->eAuthenMode == WMAC_AUTH_WPA2PSK)) {         // so we need re-selsect it according to real pairwise-key info.
+               if(pCurr->bWPAValid == TRUE)  {   //WPA-PSK
+                          pMgmt->eAuthenMode = WMAC_AUTH_WPAPSK;
+		    if(pCurr->abyPKType[0] == WPA_TKIP) {
+     		        pDevice->eEncryptionStatus = Ndis802_11Encryption2Enabled;    //TKIP
+     		        printk("Encyption_Rebuild--->ssid reset config to [WPAPSK-TKIP]\n");
+		      }
+     		   else if(pCurr->abyPKType[0] == WPA_AESCCMP) {
+		        pDevice->eEncryptionStatus = Ndis802_11Encryption3Enabled;    //AES
+                          printk("Encyption_Rebuild--->ssid reset config to [WPAPSK-AES]\n");
+     		     }
+               	}
+               else if(pCurr->bWPA2Valid == TRUE) {  //WPA2-PSK
+                         pMgmt->eAuthenMode = WMAC_AUTH_WPA2PSK;
+		       if(pCurr->abyCSSPK[0] == WLAN_11i_CSS_TKIP) {
+      		           pDevice->eEncryptionStatus = Ndis802_11Encryption2Enabled;     //TKIP
+                             printk("Encyption_Rebuild--->ssid reset config to [WPA2PSK-TKIP]\n");
+		       	}
+      		       else if(pCurr->abyCSSPK[0] == WLAN_11i_CSS_CCMP) {
+		           pDevice->eEncryptionStatus = Ndis802_11Encryption3Enabled;    //AES
+                            printk("Encyption_Rebuild--->ssid reset config to [WPA2PSK-AES]\n");
+      		       	}
+               	}
+              }
+        //  }
+      return;
+ }
+
+
+/*+
+ *
+ * Routine Description:
+ *  Format TIM field
+ *
+ *
+ * Return Value:
+ *    VOID
+ *
+-*/
+
+static
+VOID
+s_vMgrFormatTIM(
+    IN PSMgmtObject pMgmt,
+    IN PWLAN_IE_TIM pTIM
+    )
+{
+    BYTE        byMask[8] = {1, 2, 4, 8, 0x10, 0x20, 0x40, 0x80};
+    BYTE        byMap;
+    UINT        ii, jj;
+    BOOL        bStartFound = FALSE;
+    BOOL        bMulticast = FALSE;
+    WORD        wStartIndex = 0;
+    WORD        wEndIndex = 0;
+
+
+    // Find size of partial virtual bitmap
+    for (ii = 0; ii < (MAX_NODE_NUM + 1); ii++) {
+        byMap = pMgmt->abyPSTxMap[ii];
+        if (!ii) {
+            // Mask out the broadcast bit which is indicated separately.
+            bMulticast = (byMap & byMask[0]) != 0;
+            if(bMulticast) {
+               pMgmt->sNodeDBTable[0].bRxPSPoll = TRUE;
+            }
+            byMap = 0;
+        }
+        if (byMap) {
+            if (!bStartFound) {
+                bStartFound = TRUE;
+                wStartIndex = ii;
+            }
+            wEndIndex = ii;
+        }
+    };
+
+
+    // Round start index down to nearest even number
+    wStartIndex &=  ~BIT0;
+
+    // Round end index up to nearest even number
+    wEndIndex = ((wEndIndex + 1) & ~BIT0);
+
+    // Size of element payload
+
+    pTIM->len =  3 + (wEndIndex - wStartIndex) + 1;
+
+    // Fill in the Fixed parts of the TIM
+    pTIM->byDTIMCount = pMgmt->byDTIMCount;
+    pTIM->byDTIMPeriod = pMgmt->byDTIMPeriod;
+    pTIM->byBitMapCtl = (bMulticast ? TIM_MULTICAST_MASK : 0) |
+        (((wStartIndex >> 1) << 1) & TIM_BITMAPOFFSET_MASK);
+
+    // Append variable part of TIM
+
+    for (ii = wStartIndex, jj =0 ; ii <= wEndIndex; ii++, jj++) {
+         pTIM->byVirtBitMap[jj] = pMgmt->abyPSTxMap[ii];
+    }
+
+    // Aid = 0 don't used.
+    pTIM->byVirtBitMap[0]  &= ~BIT0;
+}
+
+
+/*+
+ *
+ * Routine Description:
+ *  Constructs an Beacon frame( Ad-hoc mode)
+ *
+ *
+ * Return Value:
+ *    PTR to frame; or NULL on allocation failue
+ *
+-*/
+
+static
+PSTxMgmtPacket
+s_MgrMakeBeacon(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN WORD wCurrCapInfo,
+    IN WORD wCurrBeaconPeriod,
+    IN UINT uCurrChannel,
+    IN WORD wCurrATIMWinodw,
+    IN PWLAN_IE_SSID pCurrSSID,
+    IN PBYTE pCurrBSSID,
+    IN PWLAN_IE_SUPP_RATES pCurrSuppRates,
+    IN PWLAN_IE_SUPP_RATES pCurrExtSuppRates
+    )
+{
+    PSTxMgmtPacket      pTxPacket = NULL;
+    WLAN_FR_BEACON      sFrame;
+    BYTE                abyBroadcastAddr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+    PBYTE               pbyBuffer;
+    UINT                uLength = 0;
+    PWLAN_IE_IBSS_DFS   pIBSSDFS = NULL;
+    UINT                ii;
+
+    // prepare beacon frame
+    pTxPacket = (PSTxMgmtPacket)pMgmt->pbyMgmtPacketPool;
+    memset(pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_BEACON_FR_MAXLEN);
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+    // Setup the sFrame structure.
+    sFrame.pBuf = (PBYTE)pTxPacket->p80211Header;
+    sFrame.len = WLAN_BEACON_FR_MAXLEN;
+    vMgrEncodeBeacon(&sFrame);
+    // Setup the header
+    sFrame.pHdr->sA3.wFrameCtl = cpu_to_le16(
+        (
+        WLAN_SET_FC_FTYPE(WLAN_TYPE_MGR) |
+        WLAN_SET_FC_FSTYPE(WLAN_FSTYPE_BEACON)
+        ));
+
+    if (pDevice->bEnablePSMode) {
+        sFrame.pHdr->sA3.wFrameCtl |= cpu_to_le16((WORD)WLAN_SET_FC_PWRMGT(1));
+    }
+
+    memcpy( sFrame.pHdr->sA3.abyAddr1, abyBroadcastAddr, WLAN_ADDR_LEN);
+    memcpy( sFrame.pHdr->sA3.abyAddr2, pMgmt->abyMACAddr, WLAN_ADDR_LEN);
+    memcpy( sFrame.pHdr->sA3.abyAddr3, pCurrBSSID, WLAN_BSSID_LEN);
+    *sFrame.pwBeaconInterval = cpu_to_le16(wCurrBeaconPeriod);
+    *sFrame.pwCapInfo = cpu_to_le16(wCurrCapInfo);
+    // Copy SSID
+    sFrame.pSSID = (PWLAN_IE_SSID)(sFrame.pBuf + sFrame.len);
+    sFrame.len += ((PWLAN_IE_SSID)pMgmt->abyCurrSSID)->len + WLAN_IEHDR_LEN;
+    memcpy(sFrame.pSSID,
+             pCurrSSID,
+             ((PWLAN_IE_SSID)pCurrSSID)->len + WLAN_IEHDR_LEN
+            );
+    // Copy the rate set
+    sFrame.pSuppRates = (PWLAN_IE_SUPP_RATES)(sFrame.pBuf + sFrame.len);
+    sFrame.len += ((PWLAN_IE_SUPP_RATES)pCurrSuppRates)->len + WLAN_IEHDR_LEN;
+    memcpy(sFrame.pSuppRates,
+           pCurrSuppRates,
+           ((PWLAN_IE_SUPP_RATES)pCurrSuppRates)->len + WLAN_IEHDR_LEN
+          );
+    // DS parameter
+    if (pDevice->eCurrentPHYType != PHY_TYPE_11A) {
+        sFrame.pDSParms = (PWLAN_IE_DS_PARMS)(sFrame.pBuf + sFrame.len);
+        sFrame.len += (1) + WLAN_IEHDR_LEN;
+        sFrame.pDSParms->byElementID = WLAN_EID_DS_PARMS;
+        sFrame.pDSParms->len = 1;
+        sFrame.pDSParms->byCurrChannel = (BYTE)uCurrChannel;
+    }
+    // TIM field
+    if (pMgmt->eCurrMode == WMAC_MODE_ESS_AP) {
+        sFrame.pTIM = (PWLAN_IE_TIM)(sFrame.pBuf + sFrame.len);
+        sFrame.pTIM->byElementID = WLAN_EID_TIM;
+        s_vMgrFormatTIM(pMgmt, sFrame.pTIM);
+        sFrame.len += (WLAN_IEHDR_LEN + sFrame.pTIM->len);
+    }
+
+    if (pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) {
+
+        // IBSS parameter
+        sFrame.pIBSSParms = (PWLAN_IE_IBSS_PARMS)(sFrame.pBuf + sFrame.len);
+        sFrame.len += (2) + WLAN_IEHDR_LEN;
+        sFrame.pIBSSParms->byElementID = WLAN_EID_IBSS_PARMS;
+        sFrame.pIBSSParms->len = 2;
+        sFrame.pIBSSParms->wATIMWindow = wCurrATIMWinodw;
+        if (pMgmt->eAuthenMode == WMAC_AUTH_WPANONE) {
+            /* RSN parameter */
+            sFrame.pRSNWPA = (PWLAN_IE_RSN_EXT)(sFrame.pBuf + sFrame.len);
+            sFrame.pRSNWPA->byElementID = WLAN_EID_RSN_WPA;
+            sFrame.pRSNWPA->len = 12;
+            sFrame.pRSNWPA->abyOUI[0] = 0x00;
+            sFrame.pRSNWPA->abyOUI[1] = 0x50;
+            sFrame.pRSNWPA->abyOUI[2] = 0xf2;
+            sFrame.pRSNWPA->abyOUI[3] = 0x01;
+            sFrame.pRSNWPA->wVersion = 1;
+            sFrame.pRSNWPA->abyMulticast[0] = 0x00;
+            sFrame.pRSNWPA->abyMulticast[1] = 0x50;
+            sFrame.pRSNWPA->abyMulticast[2] = 0xf2;
+            if (pDevice->eEncryptionStatus == Ndis802_11Encryption3Enabled)
+                sFrame.pRSNWPA->abyMulticast[3] = 0x04;//AES
+            else if (pDevice->eEncryptionStatus == Ndis802_11Encryption2Enabled)
+                sFrame.pRSNWPA->abyMulticast[3] = 0x02;//TKIP
+            else if (pDevice->eEncryptionStatus == Ndis802_11Encryption1Enabled)
+                sFrame.pRSNWPA->abyMulticast[3] = 0x01;//WEP40
+            else
+                sFrame.pRSNWPA->abyMulticast[3] = 0x00;//NONE
+
+            // Pairwise Key Cipher Suite
+            sFrame.pRSNWPA->wPKCount = 0;
+            // Auth Key Management Suite
+            *((PWORD)(sFrame.pBuf + sFrame.len + sFrame.pRSNWPA->len))=0;
+            sFrame.pRSNWPA->len +=2;
+
+            // RSN Capabilites
+            *((PWORD)(sFrame.pBuf + sFrame.len + sFrame.pRSNWPA->len))=0;
+            sFrame.pRSNWPA->len +=2;
+            sFrame.len += sFrame.pRSNWPA->len + WLAN_IEHDR_LEN;
+        }
+    }
+
+    if ((pMgmt->b11hEnable == TRUE) &&
+        (pMgmt->eCurrentPHYMode == PHY_TYPE_11A)) {
+        // Country IE
+        pbyBuffer = (PBYTE)(sFrame.pBuf + sFrame.len);
+        CARDvSetCountryIE(pMgmt->pAdapter, pbyBuffer);
+        CARDvSetCountryInfo(pMgmt->pAdapter, PHY_TYPE_11A, pbyBuffer);
+        uLength += ((PWLAN_IE_COUNTRY) pbyBuffer)->len + WLAN_IEHDR_LEN;
+        pbyBuffer += (((PWLAN_IE_COUNTRY) pbyBuffer)->len + WLAN_IEHDR_LEN);
+        // Power Constrain IE
+        ((PWLAN_IE_PW_CONST) pbyBuffer)->byElementID = WLAN_EID_PWR_CONSTRAINT;
+        ((PWLAN_IE_PW_CONST) pbyBuffer)->len = 1;
+        ((PWLAN_IE_PW_CONST) pbyBuffer)->byPower = 0;
+        pbyBuffer += (1) + WLAN_IEHDR_LEN;
+        uLength += (1) + WLAN_IEHDR_LEN;
+        if (pMgmt->bSwitchChannel == TRUE) {
+            // Channel Switch IE
+            ((PWLAN_IE_CH_SW) pbyBuffer)->byElementID = WLAN_EID_CH_SWITCH;
+            ((PWLAN_IE_CH_SW) pbyBuffer)->len = 3;
+            ((PWLAN_IE_CH_SW) pbyBuffer)->byMode = 1;
+            ((PWLAN_IE_CH_SW) pbyBuffer)->byChannel = CARDbyGetChannelNumber(pMgmt->pAdapter, pMgmt->byNewChannel);
+            ((PWLAN_IE_CH_SW) pbyBuffer)->byCount = 0;
+            pbyBuffer += (3) + WLAN_IEHDR_LEN;
+            uLength += (3) + WLAN_IEHDR_LEN;
+        }
+        // TPC report
+        ((PWLAN_IE_TPC_REP) pbyBuffer)->byElementID = WLAN_EID_TPC_REP;
+        ((PWLAN_IE_TPC_REP) pbyBuffer)->len = 2;
+        ((PWLAN_IE_TPC_REP) pbyBuffer)->byTxPower = CARDbyGetTransmitPower(pMgmt->pAdapter);
+        ((PWLAN_IE_TPC_REP) pbyBuffer)->byLinkMargin = 0;
+        pbyBuffer += (2) + WLAN_IEHDR_LEN;
+        uLength += (2) + WLAN_IEHDR_LEN;
+        // IBSS DFS
+        if (pMgmt->eCurrMode != WMAC_MODE_ESS_AP) {
+            pIBSSDFS = (PWLAN_IE_IBSS_DFS) pbyBuffer;
+            pIBSSDFS->byElementID = WLAN_EID_IBSS_DFS;
+            pIBSSDFS->len = 7;
+            MEMvCopy(   pIBSSDFS->abyDFSOwner,
+                        pMgmt->abyIBSSDFSOwner,
+                        6);
+            pIBSSDFS->byDFSRecovery = pMgmt->byIBSSDFSRecovery;
+            pbyBuffer += (7) + WLAN_IEHDR_LEN;
+            uLength += (7) + WLAN_IEHDR_LEN;
+            for(ii=CB_MAX_CHANNEL_24G+1; ii<=CB_MAX_CHANNEL; ii++ ) {
+                if (CARDbGetChannelMapInfo(pMgmt->pAdapter, ii, pbyBuffer, pbyBuffer+1) == TRUE) {
+                    pbyBuffer += 2;
+                    uLength += 2;
+                    pIBSSDFS->len += 2;
+                }
+            }
+        }
+        sFrame.len += uLength;
+    }
+
+    if (pMgmt->eCurrentPHYMode == PHY_TYPE_11G) {
+        sFrame.pERP = (PWLAN_IE_ERP)(sFrame.pBuf + sFrame.len);
+        sFrame.len += 1 + WLAN_IEHDR_LEN;
+        sFrame.pERP->byElementID = WLAN_EID_ERP;
+        sFrame.pERP->len = 1;
+        sFrame.pERP->byContext = 0;
+        if (pDevice->bProtectMode == TRUE)
+            sFrame.pERP->byContext |= WLAN_EID_ERP_USE_PROTECTION;
+        if (pDevice->bNonERPPresent == TRUE)
+            sFrame.pERP->byContext |= WLAN_EID_ERP_NONERP_PRESENT;
+        if (pDevice->bBarkerPreambleMd == TRUE)
+            sFrame.pERP->byContext |= WLAN_EID_ERP_BARKER_MODE;
+    }
+    if (((PWLAN_IE_SUPP_RATES)pCurrExtSuppRates)->len != 0) {
+        sFrame.pExtSuppRates = (PWLAN_IE_SUPP_RATES)(sFrame.pBuf + sFrame.len);
+        sFrame.len += ((PWLAN_IE_SUPP_RATES)pCurrExtSuppRates)->len + WLAN_IEHDR_LEN;
+        MEMvCopy(sFrame.pExtSuppRates,
+             pCurrExtSuppRates,
+             ((PWLAN_IE_SUPP_RATES)pCurrExtSuppRates)->len + WLAN_IEHDR_LEN
+             );
+    }
+    // hostapd wpa/wpa2 IE
+    if ((pMgmt->eCurrMode == WMAC_MODE_ESS_AP) && (pDevice->bEnableHostapd == TRUE)) {
+         if (pMgmt->eAuthenMode == WMAC_AUTH_WPANONE) {
+             if (pMgmt->wWPAIELen != 0) {
+                 sFrame.pRSN = (PWLAN_IE_RSN)(sFrame.pBuf + sFrame.len);
+                 memcpy(sFrame.pRSN, pMgmt->abyWPAIE, pMgmt->wWPAIELen);
+                 sFrame.len += pMgmt->wWPAIELen;
+             }
+         }
+    }
+
+    /* Adjust the length fields */
+    pTxPacket->cbMPDULen = sFrame.len;
+    pTxPacket->cbPayloadLen = sFrame.len - WLAN_HDR_ADDR3_LEN;
+
+    return pTxPacket;
+}
+
+
+
+
+
+/*+
+ *
+ * Routine Description:
+ *  Constructs an Prob-response frame
+ *
+ *
+ * Return Value:
+ *    PTR to frame; or NULL on allocation failue
+ *
+-*/
+
+
+
+
+PSTxMgmtPacket
+s_MgrMakeProbeResponse(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN WORD wCurrCapInfo,
+    IN WORD wCurrBeaconPeriod,
+    IN UINT uCurrChannel,
+    IN WORD wCurrATIMWinodw,
+    IN PBYTE pDstAddr,
+    IN PWLAN_IE_SSID pCurrSSID,
+    IN PBYTE pCurrBSSID,
+    IN PWLAN_IE_SUPP_RATES pCurrSuppRates,
+    IN PWLAN_IE_SUPP_RATES pCurrExtSuppRates,
+    IN BYTE byPHYType
+    )
+{
+    PSTxMgmtPacket      pTxPacket = NULL;
+    WLAN_FR_PROBERESP   sFrame;
+    PBYTE               pbyBuffer;
+    UINT                uLength = 0;
+    PWLAN_IE_IBSS_DFS   pIBSSDFS = NULL;
+    UINT                ii;
+
+
+    pTxPacket = (PSTxMgmtPacket)pMgmt->pbyMgmtPacketPool;
+    memset(pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_PROBERESP_FR_MAXLEN);
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+    // Setup the sFrame structure.
+    sFrame.pBuf = (PBYTE)pTxPacket->p80211Header;
+    sFrame.len = WLAN_PROBERESP_FR_MAXLEN;
+    vMgrEncodeProbeResponse(&sFrame);
+    // Setup the header
+    sFrame.pHdr->sA3.wFrameCtl = cpu_to_le16(
+        (
+        WLAN_SET_FC_FTYPE(WLAN_TYPE_MGR) |
+        WLAN_SET_FC_FSTYPE(WLAN_FSTYPE_PROBERESP)
+        ));
+    memcpy( sFrame.pHdr->sA3.abyAddr1, pDstAddr, WLAN_ADDR_LEN);
+    memcpy( sFrame.pHdr->sA3.abyAddr2, pMgmt->abyMACAddr, WLAN_ADDR_LEN);
+    memcpy( sFrame.pHdr->sA3.abyAddr3, pCurrBSSID, WLAN_BSSID_LEN);
+    *sFrame.pwBeaconInterval = cpu_to_le16(wCurrBeaconPeriod);
+    *sFrame.pwCapInfo = cpu_to_le16(wCurrCapInfo);
+
+    if (byPHYType == BB_TYPE_11B) {
+        *sFrame.pwCapInfo &= cpu_to_le16((WORD)~(WLAN_SET_CAP_INFO_SHORTSLOTTIME(1)));
+    }
+
+    // Copy SSID
+    sFrame.pSSID = (PWLAN_IE_SSID)(sFrame.pBuf + sFrame.len);
+    sFrame.len += ((PWLAN_IE_SSID)pMgmt->abyCurrSSID)->len + WLAN_IEHDR_LEN;
+    memcpy(sFrame.pSSID,
+           pCurrSSID,
+           ((PWLAN_IE_SSID)pCurrSSID)->len + WLAN_IEHDR_LEN
+           );
+    // Copy the rate set
+    sFrame.pSuppRates = (PWLAN_IE_SUPP_RATES)(sFrame.pBuf + sFrame.len);
+
+    sFrame.len += ((PWLAN_IE_SUPP_RATES)pCurrSuppRates)->len + WLAN_IEHDR_LEN;
+    memcpy(sFrame.pSuppRates,
+           pCurrSuppRates,
+           ((PWLAN_IE_SUPP_RATES)pCurrSuppRates)->len + WLAN_IEHDR_LEN
+          );
+
+    // DS parameter
+    if (pDevice->eCurrentPHYType != PHY_TYPE_11A) {
+        sFrame.pDSParms = (PWLAN_IE_DS_PARMS)(sFrame.pBuf + sFrame.len);
+        sFrame.len += (1) + WLAN_IEHDR_LEN;
+        sFrame.pDSParms->byElementID = WLAN_EID_DS_PARMS;
+        sFrame.pDSParms->len = 1;
+        sFrame.pDSParms->byCurrChannel = (BYTE)uCurrChannel;
+    }
+
+    if (pMgmt->eCurrMode != WMAC_MODE_ESS_AP) {
+        // IBSS parameter
+        sFrame.pIBSSParms = (PWLAN_IE_IBSS_PARMS)(sFrame.pBuf + sFrame.len);
+        sFrame.len += (2) + WLAN_IEHDR_LEN;
+        sFrame.pIBSSParms->byElementID = WLAN_EID_IBSS_PARMS;
+        sFrame.pIBSSParms->len = 2;
+        sFrame.pIBSSParms->wATIMWindow = 0;
+    }
+    if (pDevice->eCurrentPHYType == PHY_TYPE_11G) {
+        sFrame.pERP = (PWLAN_IE_ERP)(sFrame.pBuf + sFrame.len);
+        sFrame.len += 1 + WLAN_IEHDR_LEN;
+        sFrame.pERP->byElementID = WLAN_EID_ERP;
+        sFrame.pERP->len = 1;
+        sFrame.pERP->byContext = 0;
+        if (pDevice->bProtectMode == TRUE)
+            sFrame.pERP->byContext |= WLAN_EID_ERP_USE_PROTECTION;
+        if (pDevice->bNonERPPresent == TRUE)
+            sFrame.pERP->byContext |= WLAN_EID_ERP_NONERP_PRESENT;
+        if (pDevice->bBarkerPreambleMd == TRUE)
+            sFrame.pERP->byContext |= WLAN_EID_ERP_BARKER_MODE;
+    }
+
+    if ((pMgmt->b11hEnable == TRUE) &&
+        (pMgmt->eCurrentPHYMode == PHY_TYPE_11A)) {
+        // Country IE
+        pbyBuffer = (PBYTE)(sFrame.pBuf + sFrame.len);
+        CARDvSetCountryIE(pMgmt->pAdapter, pbyBuffer);
+        CARDvSetCountryInfo(pMgmt->pAdapter, PHY_TYPE_11A, pbyBuffer);
+        uLength += ((PWLAN_IE_COUNTRY) pbyBuffer)->len + WLAN_IEHDR_LEN;
+        pbyBuffer += (((PWLAN_IE_COUNTRY) pbyBuffer)->len + WLAN_IEHDR_LEN);
+        // Power Constrain IE
+        ((PWLAN_IE_PW_CONST) pbyBuffer)->byElementID = WLAN_EID_PWR_CONSTRAINT;
+        ((PWLAN_IE_PW_CONST) pbyBuffer)->len = 1;
+        ((PWLAN_IE_PW_CONST) pbyBuffer)->byPower = 0;
+        pbyBuffer += (1) + WLAN_IEHDR_LEN;
+        uLength += (1) + WLAN_IEHDR_LEN;
+        if (pMgmt->bSwitchChannel == TRUE) {
+            // Channel Switch IE
+            ((PWLAN_IE_CH_SW) pbyBuffer)->byElementID = WLAN_EID_CH_SWITCH;
+            ((PWLAN_IE_CH_SW) pbyBuffer)->len = 3;
+            ((PWLAN_IE_CH_SW) pbyBuffer)->byMode = 1;
+            ((PWLAN_IE_CH_SW) pbyBuffer)->byChannel = CARDbyGetChannelNumber(pMgmt->pAdapter, pMgmt->byNewChannel);
+            ((PWLAN_IE_CH_SW) pbyBuffer)->byCount = 0;
+            pbyBuffer += (3) + WLAN_IEHDR_LEN;
+            uLength += (3) + WLAN_IEHDR_LEN;
+        }
+        // TPC report
+        ((PWLAN_IE_TPC_REP) pbyBuffer)->byElementID = WLAN_EID_TPC_REP;
+        ((PWLAN_IE_TPC_REP) pbyBuffer)->len = 2;
+        ((PWLAN_IE_TPC_REP) pbyBuffer)->byTxPower = CARDbyGetTransmitPower(pMgmt->pAdapter);
+        ((PWLAN_IE_TPC_REP) pbyBuffer)->byLinkMargin = 0;
+        pbyBuffer += (2) + WLAN_IEHDR_LEN;
+        uLength += (2) + WLAN_IEHDR_LEN;
+        // IBSS DFS
+        if (pMgmt->eCurrMode != WMAC_MODE_ESS_AP) {
+            pIBSSDFS = (PWLAN_IE_IBSS_DFS) pbyBuffer;
+            pIBSSDFS->byElementID = WLAN_EID_IBSS_DFS;
+            pIBSSDFS->len = 7;
+            MEMvCopy(   pIBSSDFS->abyDFSOwner,
+                        pMgmt->abyIBSSDFSOwner,
+                        6);
+            pIBSSDFS->byDFSRecovery = pMgmt->byIBSSDFSRecovery;
+            pbyBuffer += (7) + WLAN_IEHDR_LEN;
+            uLength += (7) + WLAN_IEHDR_LEN;
+            for(ii=CB_MAX_CHANNEL_24G+1; ii<=CB_MAX_CHANNEL; ii++ ) {
+                if (CARDbGetChannelMapInfo(pMgmt->pAdapter, ii, pbyBuffer, pbyBuffer+1) == TRUE) {
+                    pbyBuffer += 2;
+                    uLength += 2;
+                    pIBSSDFS->len += 2;
+                }
+            }
+        }
+        sFrame.len += uLength;
+    }
+
+
+    if (((PWLAN_IE_SUPP_RATES)pCurrExtSuppRates)->len != 0) {
+        sFrame.pExtSuppRates = (PWLAN_IE_SUPP_RATES)(sFrame.pBuf + sFrame.len);
+        sFrame.len += ((PWLAN_IE_SUPP_RATES)pCurrExtSuppRates)->len + WLAN_IEHDR_LEN;
+        MEMvCopy(sFrame.pExtSuppRates,
+             pCurrExtSuppRates,
+             ((PWLAN_IE_SUPP_RATES)pCurrExtSuppRates)->len + WLAN_IEHDR_LEN
+             );
+    }
+
+    // hostapd wpa/wpa2 IE
+    if ((pMgmt->eCurrMode == WMAC_MODE_ESS_AP) && (pDevice->bEnableHostapd == TRUE)) {
+         if (pMgmt->eAuthenMode == WMAC_AUTH_WPANONE) {
+             if (pMgmt->wWPAIELen != 0) {
+                 sFrame.pRSN = (PWLAN_IE_RSN)(sFrame.pBuf + sFrame.len);
+                 memcpy(sFrame.pRSN, pMgmt->abyWPAIE, pMgmt->wWPAIELen);
+                 sFrame.len += pMgmt->wWPAIELen;
+             }
+         }
+    }
+
+    // Adjust the length fields
+    pTxPacket->cbMPDULen = sFrame.len;
+    pTxPacket->cbPayloadLen = sFrame.len - WLAN_HDR_ADDR3_LEN;
+
+    return pTxPacket;
+}
+
+
+
+/*+
+ *
+ * Routine Description:
+ *  Constructs an association request frame
+ *
+ *
+ * Return Value:
+ *    A ptr to frame or NULL on allocation failue
+ *
+-*/
+
+
+PSTxMgmtPacket
+s_MgrMakeAssocRequest(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PBYTE pDAddr,
+    IN WORD wCurrCapInfo,
+    IN WORD wListenInterval,
+    IN PWLAN_IE_SSID pCurrSSID,
+    IN PWLAN_IE_SUPP_RATES pCurrRates,
+    IN PWLAN_IE_SUPP_RATES pCurrExtSuppRates
+    )
+{
+    PSTxMgmtPacket      pTxPacket = NULL;
+    WLAN_FR_ASSOCREQ    sFrame;
+    PBYTE               pbyIEs;
+    PBYTE               pbyRSN;
+
+
+    pTxPacket = (PSTxMgmtPacket)pMgmt->pbyMgmtPacketPool;
+    memset(pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_ASSOCREQ_FR_MAXLEN);
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+    // Setup the sFrame structure.
+    sFrame.pBuf = (PBYTE)pTxPacket->p80211Header;
+    sFrame.len = WLAN_ASSOCREQ_FR_MAXLEN;
+    // format fixed field frame structure
+    vMgrEncodeAssocRequest(&sFrame);
+    // Setup the header
+    sFrame.pHdr->sA3.wFrameCtl = cpu_to_le16(
+        (
+        WLAN_SET_FC_FTYPE(WLAN_TYPE_MGR) |
+        WLAN_SET_FC_FSTYPE(WLAN_FSTYPE_ASSOCREQ)
+        ));
+    memcpy( sFrame.pHdr->sA3.abyAddr1, pDAddr, WLAN_ADDR_LEN);
+    memcpy( sFrame.pHdr->sA3.abyAddr2, pMgmt->abyMACAddr, WLAN_ADDR_LEN);
+    memcpy( sFrame.pHdr->sA3.abyAddr3, pMgmt->abyCurrBSSID, WLAN_BSSID_LEN);
+
+    // Set the capibility and listen interval
+    *(sFrame.pwCapInfo) = cpu_to_le16(wCurrCapInfo);
+    *(sFrame.pwListenInterval) = cpu_to_le16(wListenInterval);
+
+    // sFrame.len point to end of fixed field
+    sFrame.pSSID = (PWLAN_IE_SSID)(sFrame.pBuf + sFrame.len);
+    sFrame.len += pCurrSSID->len + WLAN_IEHDR_LEN;
+    memcpy(sFrame.pSSID, pCurrSSID, pCurrSSID->len + WLAN_IEHDR_LEN);
+
+    pMgmt->sAssocInfo.AssocInfo.RequestIELength = pCurrSSID->len + WLAN_IEHDR_LEN;
+    pMgmt->sAssocInfo.AssocInfo.OffsetRequestIEs = sizeof(NDIS_802_11_ASSOCIATION_INFORMATION);
+    pbyIEs = pMgmt->sAssocInfo.abyIEs;
+    MEMvCopy(pbyIEs, pCurrSSID, pCurrSSID->len + WLAN_IEHDR_LEN);
+    pbyIEs += pCurrSSID->len + WLAN_IEHDR_LEN;
+
+    // Copy the rate set
+    sFrame.pSuppRates = (PWLAN_IE_SUPP_RATES)(sFrame.pBuf + sFrame.len);
+    if ((pDevice->eCurrentPHYType == PHY_TYPE_11B) && (pCurrRates->len > 4))
+        sFrame.len += 4 + WLAN_IEHDR_LEN;
+    else
+        sFrame.len += pCurrRates->len + WLAN_IEHDR_LEN;
+    memcpy(sFrame.pSuppRates, pCurrRates, pCurrRates->len + WLAN_IEHDR_LEN);
+
+    // Copy the extension rate set
+    if ((pDevice->eCurrentPHYType == PHY_TYPE_11G) && (pCurrExtSuppRates->len > 0)) {
+        sFrame.pExtSuppRates = (PWLAN_IE_SUPP_RATES)(sFrame.pBuf + sFrame.len);
+        sFrame.len += pCurrExtSuppRates->len + WLAN_IEHDR_LEN;
+        memcpy(sFrame.pExtSuppRates, pCurrExtSuppRates, pCurrExtSuppRates->len + WLAN_IEHDR_LEN);
+    }
+
+    pMgmt->sAssocInfo.AssocInfo.RequestIELength += pCurrRates->len + WLAN_IEHDR_LEN;
+    MEMvCopy(pbyIEs, pCurrRates, pCurrRates->len + WLAN_IEHDR_LEN);
+    pbyIEs += pCurrRates->len + WLAN_IEHDR_LEN;
+
+    // for 802.11h
+    if (pMgmt->b11hEnable == TRUE) {
+        if (sFrame.pCurrPowerCap == NULL) {
+            sFrame.pCurrPowerCap = (PWLAN_IE_PW_CAP)(sFrame.pBuf + sFrame.len);
+            sFrame.len += (2 + WLAN_IEHDR_LEN);
+            sFrame.pCurrPowerCap->byElementID = WLAN_EID_PWR_CAPABILITY;
+            sFrame.pCurrPowerCap->len = 2;
+            CARDvGetPowerCapability(pMgmt->pAdapter,
+                                    &(sFrame.pCurrPowerCap->byMinPower),
+                                    &(sFrame.pCurrPowerCap->byMaxPower)
+                                    );
+        }
+        if (sFrame.pCurrSuppCh == NULL) {
+            sFrame.pCurrSuppCh = (PWLAN_IE_SUPP_CH)(sFrame.pBuf + sFrame.len);
+            sFrame.len += CARDbySetSupportChannels(pMgmt->pAdapter,(PBYTE)sFrame.pCurrSuppCh);
+        }
+    }
+
+    if (((pMgmt->eAuthenMode == WMAC_AUTH_WPA) ||
+         (pMgmt->eAuthenMode == WMAC_AUTH_WPAPSK) ||
+         (pMgmt->eAuthenMode == WMAC_AUTH_WPANONE)) &&
+        (pMgmt->pCurrBSS != NULL)) {
+        /* WPA IE */
+        sFrame.pRSNWPA = (PWLAN_IE_RSN_EXT)(sFrame.pBuf + sFrame.len);
+        sFrame.pRSNWPA->byElementID = WLAN_EID_RSN_WPA;
+        sFrame.pRSNWPA->len = 16;
+        sFrame.pRSNWPA->abyOUI[0] = 0x00;
+        sFrame.pRSNWPA->abyOUI[1] = 0x50;
+        sFrame.pRSNWPA->abyOUI[2] = 0xf2;
+        sFrame.pRSNWPA->abyOUI[3] = 0x01;
+        sFrame.pRSNWPA->wVersion = 1;
+        //Group Key Cipher Suite
+        sFrame.pRSNWPA->abyMulticast[0] = 0x00;
+        sFrame.pRSNWPA->abyMulticast[1] = 0x50;
+        sFrame.pRSNWPA->abyMulticast[2] = 0xf2;
+        if (pMgmt->byCSSGK == KEY_CTL_WEP) {
+            sFrame.pRSNWPA->abyMulticast[3] = pMgmt->pCurrBSS->byGKType;
+        } else if (pMgmt->byCSSGK == KEY_CTL_TKIP) {
+            sFrame.pRSNWPA->abyMulticast[3] = WPA_TKIP;
+        } else if (pMgmt->byCSSGK == KEY_CTL_CCMP) {
+            sFrame.pRSNWPA->abyMulticast[3] = WPA_AESCCMP;
+        } else {
+            sFrame.pRSNWPA->abyMulticast[3] = WPA_NONE;
+        }
+        // Pairwise Key Cipher Suite
+        sFrame.pRSNWPA->wPKCount = 1;
+        sFrame.pRSNWPA->PKSList[0].abyOUI[0] = 0x00;
+        sFrame.pRSNWPA->PKSList[0].abyOUI[1] = 0x50;
+        sFrame.pRSNWPA->PKSList[0].abyOUI[2] = 0xf2;
+        if (pMgmt->byCSSPK == KEY_CTL_TKIP) {
+            sFrame.pRSNWPA->PKSList[0].abyOUI[3] = WPA_TKIP;
+        } else if (pMgmt->byCSSPK == KEY_CTL_CCMP) {
+            sFrame.pRSNWPA->PKSList[0].abyOUI[3] = WPA_AESCCMP;
+        } else {
+            sFrame.pRSNWPA->PKSList[0].abyOUI[3] = WPA_NONE;
+        }
+        // Auth Key Management Suite
+        pbyRSN = (PBYTE)(sFrame.pBuf + sFrame.len + 2 + sFrame.pRSNWPA->len);
+        *pbyRSN++=0x01;
+        *pbyRSN++=0x00;
+        *pbyRSN++=0x00;
+        *pbyRSN++=0x50;
+        *pbyRSN++=0xf2;
+        if (pMgmt->eAuthenMode == WMAC_AUTH_WPAPSK) {
+            *pbyRSN++=WPA_AUTH_PSK;
+        }
+        else if (pMgmt->eAuthenMode == WMAC_AUTH_WPA) {
+            *pbyRSN++=WPA_AUTH_IEEE802_1X;
+        }
+        else {
+            *pbyRSN++=WPA_NONE;
+        }
+        sFrame.pRSNWPA->len +=6;
+
+        // RSN Capabilites
+        *pbyRSN++=0x00;
+        *pbyRSN++=0x00;
+        sFrame.pRSNWPA->len +=2;
+        sFrame.len += sFrame.pRSNWPA->len + WLAN_IEHDR_LEN;
+        // copy to AssocInfo. for OID_802_11_ASSOCIATION_INFORMATION
+        pMgmt->sAssocInfo.AssocInfo.RequestIELength += sFrame.pRSNWPA->len + WLAN_IEHDR_LEN;
+        MEMvCopy(pbyIEs, sFrame.pRSNWPA, sFrame.pRSNWPA->len + WLAN_IEHDR_LEN);
+        pbyIEs += sFrame.pRSNWPA->len + WLAN_IEHDR_LEN;
+
+    } else if (((pMgmt->eAuthenMode == WMAC_AUTH_WPA2) ||
+                (pMgmt->eAuthenMode == WMAC_AUTH_WPA2PSK)) &&
+               (pMgmt->pCurrBSS != NULL)) {
+        UINT                ii;
+        PWORD               pwPMKID;
+
+        // WPA IE
+        sFrame.pRSN = (PWLAN_IE_RSN)(sFrame.pBuf + sFrame.len);
+        sFrame.pRSN->byElementID = WLAN_EID_RSN;
+        sFrame.pRSN->len = 6; //Version(2)+GK(4)
+        sFrame.pRSN->wVersion = 1;
+        //Group Key Cipher Suite
+        sFrame.pRSN->abyRSN[0] = 0x00;
+        sFrame.pRSN->abyRSN[1] = 0x0F;
+        sFrame.pRSN->abyRSN[2] = 0xAC;
+        if (pMgmt->byCSSGK == KEY_CTL_WEP) {
+            sFrame.pRSN->abyRSN[3] = pMgmt->pCurrBSS->byCSSGK;
+        } else if (pMgmt->byCSSGK == KEY_CTL_TKIP) {
+            sFrame.pRSN->abyRSN[3] = WLAN_11i_CSS_TKIP;
+        } else if (pMgmt->byCSSGK == KEY_CTL_CCMP) {
+            sFrame.pRSN->abyRSN[3] = WLAN_11i_CSS_CCMP;
+        } else {
+            sFrame.pRSN->abyRSN[3] = WLAN_11i_CSS_UNKNOWN;
+        }
+
+        // Pairwise Key Cipher Suite
+        sFrame.pRSN->abyRSN[4] = 1;
+        sFrame.pRSN->abyRSN[5] = 0;
+        sFrame.pRSN->abyRSN[6] = 0x00;
+        sFrame.pRSN->abyRSN[7] = 0x0F;
+        sFrame.pRSN->abyRSN[8] = 0xAC;
+        if (pMgmt->byCSSPK == KEY_CTL_TKIP) {
+            sFrame.pRSN->abyRSN[9] = WLAN_11i_CSS_TKIP;
+        } else if (pMgmt->byCSSPK == KEY_CTL_CCMP) {
+            sFrame.pRSN->abyRSN[9] = WLAN_11i_CSS_CCMP;
+        } else if (pMgmt->byCSSPK == KEY_CTL_NONE) {
+            sFrame.pRSN->abyRSN[9] = WLAN_11i_CSS_USE_GROUP;
+        } else {
+            sFrame.pRSN->abyRSN[9] = WLAN_11i_CSS_UNKNOWN;
+        }
+        sFrame.pRSN->len += 6;
+
+        // Auth Key Management Suite
+        sFrame.pRSN->abyRSN[10] = 1;
+        sFrame.pRSN->abyRSN[11] = 0;
+        sFrame.pRSN->abyRSN[12] = 0x00;
+        sFrame.pRSN->abyRSN[13] = 0x0F;
+        sFrame.pRSN->abyRSN[14] = 0xAC;
+        if (pMgmt->eAuthenMode == WMAC_AUTH_WPA2PSK) {
+            sFrame.pRSN->abyRSN[15] = WLAN_11i_AKMSS_PSK;
+        } else if (pMgmt->eAuthenMode == WMAC_AUTH_WPA2) {
+            sFrame.pRSN->abyRSN[15] = WLAN_11i_AKMSS_802_1X;
+        } else {
+            sFrame.pRSN->abyRSN[15] = WLAN_11i_AKMSS_UNKNOWN;
+        }
+        sFrame.pRSN->len +=6;
+
+        // RSN Capabilites
+        if (pMgmt->pCurrBSS->sRSNCapObj.bRSNCapExist == TRUE) {
+            MEMvCopy(&sFrame.pRSN->abyRSN[16], &pMgmt->pCurrBSS->sRSNCapObj.wRSNCap, 2);
+        } else {
+            sFrame.pRSN->abyRSN[16] = 0;
+            sFrame.pRSN->abyRSN[17] = 0;
+        }
+        sFrame.pRSN->len +=2;
+
+        if ((pDevice->gsPMKID.BSSIDInfoCount > 0) && (pDevice->bRoaming == TRUE) && (pMgmt->eAuthenMode == WMAC_AUTH_WPA2)) {
+            // RSN PMKID
+            pbyRSN = &sFrame.pRSN->abyRSN[18];
+            pwPMKID = (PWORD)pbyRSN; // Point to PMKID count
+            *pwPMKID = 0;            // Initialize PMKID count
+            pbyRSN += 2;             // Point to PMKID list
+            for (ii = 0; ii < pDevice->gsPMKID.BSSIDInfoCount; ii++) {
+                if (MEMEqualMemory(&pDevice->gsPMKID.BSSIDInfo[ii].BSSID[0], pMgmt->abyCurrBSSID, U_ETHER_ADDR_LEN)) {
+                    (*pwPMKID) ++;
+                    MEMvCopy(pbyRSN, pDevice->gsPMKID.BSSIDInfo[ii].PMKID, 16);
+                    pbyRSN += 16;
+                }
+            }
+            if (*pwPMKID != 0) {
+                sFrame.pRSN->len += (2 + (*pwPMKID)*16);
+            }
+        }
+
+        sFrame.len += sFrame.pRSN->len + WLAN_IEHDR_LEN;
+        // copy to AssocInfo. for OID_802_11_ASSOCIATION_INFORMATION
+        pMgmt->sAssocInfo.AssocInfo.RequestIELength += sFrame.pRSN->len + WLAN_IEHDR_LEN;
+        MEMvCopy(pbyIEs, sFrame.pRSN, sFrame.pRSN->len + WLAN_IEHDR_LEN);
+        pbyIEs += sFrame.pRSN->len + WLAN_IEHDR_LEN;
+    }
+
+
+    // Adjust the length fields
+    pTxPacket->cbMPDULen = sFrame.len;
+    pTxPacket->cbPayloadLen = sFrame.len - WLAN_HDR_ADDR3_LEN;
+    return pTxPacket;
+}
+
+
+
+
+
+
+
+
+/*+
+ *
+ * Routine Description:
+ *  Constructs an re-association request frame
+ *
+ *
+ * Return Value:
+ *    A ptr to frame or NULL on allocation failue
+ *
+-*/
+
+
+PSTxMgmtPacket
+s_MgrMakeReAssocRequest(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PBYTE pDAddr,
+    IN WORD wCurrCapInfo,
+    IN WORD wListenInterval,
+    IN PWLAN_IE_SSID pCurrSSID,
+    IN PWLAN_IE_SUPP_RATES pCurrRates,
+    IN PWLAN_IE_SUPP_RATES pCurrExtSuppRates
+    )
+{
+    PSTxMgmtPacket      pTxPacket = NULL;
+    WLAN_FR_REASSOCREQ  sFrame;
+    PBYTE               pbyIEs;
+    PBYTE               pbyRSN;
+
+
+    pTxPacket = (PSTxMgmtPacket)pMgmt->pbyMgmtPacketPool;
+    memset( pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_REASSOCREQ_FR_MAXLEN);
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+    /* Setup the sFrame structure. */
+    sFrame.pBuf = (PBYTE)pTxPacket->p80211Header;
+    sFrame.len = WLAN_REASSOCREQ_FR_MAXLEN;
+
+    // format fixed field frame structure
+    vMgrEncodeReassocRequest(&sFrame);
+
+    /* Setup the header */
+    sFrame.pHdr->sA3.wFrameCtl = cpu_to_le16(
+        (
+        WLAN_SET_FC_FTYPE(WLAN_TYPE_MGR) |
+        WLAN_SET_FC_FSTYPE(WLAN_FSTYPE_REASSOCREQ)
+        ));
+    memcpy( sFrame.pHdr->sA3.abyAddr1, pDAddr, WLAN_ADDR_LEN);
+    memcpy( sFrame.pHdr->sA3.abyAddr2, pMgmt->abyMACAddr, WLAN_ADDR_LEN);
+    memcpy( sFrame.pHdr->sA3.abyAddr3, pMgmt->abyCurrBSSID, WLAN_BSSID_LEN);
+
+    /* Set the capibility and listen interval */
+    *(sFrame.pwCapInfo) = cpu_to_le16(wCurrCapInfo);
+    *(sFrame.pwListenInterval) = cpu_to_le16(wListenInterval);
+
+    memcpy(sFrame.pAddrCurrAP, pMgmt->abyCurrBSSID, WLAN_BSSID_LEN);
+    /* Copy the SSID */
+    /* sFrame.len point to end of fixed field */
+    sFrame.pSSID = (PWLAN_IE_SSID)(sFrame.pBuf + sFrame.len);
+    sFrame.len += pCurrSSID->len + WLAN_IEHDR_LEN;
+    memcpy(sFrame.pSSID, pCurrSSID, pCurrSSID->len + WLAN_IEHDR_LEN);
+
+    pMgmt->sAssocInfo.AssocInfo.RequestIELength = pCurrSSID->len + WLAN_IEHDR_LEN;
+    pMgmt->sAssocInfo.AssocInfo.OffsetRequestIEs = sizeof(NDIS_802_11_ASSOCIATION_INFORMATION);
+    pbyIEs = pMgmt->sAssocInfo.abyIEs;
+    MEMvCopy(pbyIEs, pCurrSSID, pCurrSSID->len + WLAN_IEHDR_LEN);
+    pbyIEs += pCurrSSID->len + WLAN_IEHDR_LEN;
+
+    /* Copy the rate set */
+    /* sFrame.len point to end of SSID */
+    sFrame.pSuppRates = (PWLAN_IE_SUPP_RATES)(sFrame.pBuf + sFrame.len);
+    sFrame.len += pCurrRates->len + WLAN_IEHDR_LEN;
+    memcpy(sFrame.pSuppRates, pCurrRates, pCurrRates->len + WLAN_IEHDR_LEN);
+
+    // Copy the extension rate set
+    if ((pMgmt->eCurrentPHYMode == PHY_TYPE_11G) && (pCurrExtSuppRates->len > 0)) {
+        sFrame.pExtSuppRates = (PWLAN_IE_SUPP_RATES)(sFrame.pBuf + sFrame.len);
+        sFrame.len += pCurrExtSuppRates->len + WLAN_IEHDR_LEN;
+        memcpy(sFrame.pExtSuppRates, pCurrExtSuppRates, pCurrExtSuppRates->len + WLAN_IEHDR_LEN);
+    }
+
+    pMgmt->sAssocInfo.AssocInfo.RequestIELength += pCurrRates->len + WLAN_IEHDR_LEN;
+    MEMvCopy(pbyIEs, pCurrRates, pCurrRates->len + WLAN_IEHDR_LEN);
+    pbyIEs += pCurrRates->len + WLAN_IEHDR_LEN;
+
+    if (((pMgmt->eAuthenMode == WMAC_AUTH_WPA) ||
+         (pMgmt->eAuthenMode == WMAC_AUTH_WPAPSK) ||
+         (pMgmt->eAuthenMode == WMAC_AUTH_WPANONE)) &&
+        (pMgmt->pCurrBSS != NULL)) {
+        /* WPA IE */
+        sFrame.pRSNWPA = (PWLAN_IE_RSN_EXT)(sFrame.pBuf + sFrame.len);
+        sFrame.pRSNWPA->byElementID = WLAN_EID_RSN_WPA;
+        sFrame.pRSNWPA->len = 16;
+        sFrame.pRSNWPA->abyOUI[0] = 0x00;
+        sFrame.pRSNWPA->abyOUI[1] = 0x50;
+        sFrame.pRSNWPA->abyOUI[2] = 0xf2;
+        sFrame.pRSNWPA->abyOUI[3] = 0x01;
+        sFrame.pRSNWPA->wVersion = 1;
+        //Group Key Cipher Suite
+        sFrame.pRSNWPA->abyMulticast[0] = 0x00;
+        sFrame.pRSNWPA->abyMulticast[1] = 0x50;
+        sFrame.pRSNWPA->abyMulticast[2] = 0xf2;
+        if (pMgmt->byCSSGK == KEY_CTL_WEP) {
+            sFrame.pRSNWPA->abyMulticast[3] = pMgmt->pCurrBSS->byGKType;
+        } else if (pMgmt->byCSSGK == KEY_CTL_TKIP) {
+            sFrame.pRSNWPA->abyMulticast[3] = WPA_TKIP;
+        } else if (pMgmt->byCSSGK == KEY_CTL_CCMP) {
+            sFrame.pRSNWPA->abyMulticast[3] = WPA_AESCCMP;
+        } else {
+            sFrame.pRSNWPA->abyMulticast[3] = WPA_NONE;
+        }
+        // Pairwise Key Cipher Suite
+        sFrame.pRSNWPA->wPKCount = 1;
+        sFrame.pRSNWPA->PKSList[0].abyOUI[0] = 0x00;
+        sFrame.pRSNWPA->PKSList[0].abyOUI[1] = 0x50;
+        sFrame.pRSNWPA->PKSList[0].abyOUI[2] = 0xf2;
+        if (pMgmt->byCSSPK == KEY_CTL_TKIP) {
+            sFrame.pRSNWPA->PKSList[0].abyOUI[3] = WPA_TKIP;
+        } else if (pMgmt->byCSSPK == KEY_CTL_CCMP) {
+            sFrame.pRSNWPA->PKSList[0].abyOUI[3] = WPA_AESCCMP;
+        } else {
+            sFrame.pRSNWPA->PKSList[0].abyOUI[3] = WPA_NONE;
+        }
+        // Auth Key Management Suite
+        pbyRSN = (PBYTE)(sFrame.pBuf + sFrame.len + 2 + sFrame.pRSNWPA->len);
+        *pbyRSN++=0x01;
+        *pbyRSN++=0x00;
+        *pbyRSN++=0x00;
+        *pbyRSN++=0x50;
+        *pbyRSN++=0xf2;
+        if (pMgmt->eAuthenMode == WMAC_AUTH_WPAPSK) {
+            *pbyRSN++=WPA_AUTH_PSK;
+        } else if (pMgmt->eAuthenMode == WMAC_AUTH_WPA) {
+            *pbyRSN++=WPA_AUTH_IEEE802_1X;
+        } else {
+            *pbyRSN++=WPA_NONE;
+        }
+        sFrame.pRSNWPA->len +=6;
+
+        // RSN Capabilites
+        *pbyRSN++=0x00;
+        *pbyRSN++=0x00;
+        sFrame.pRSNWPA->len +=2;
+        sFrame.len += sFrame.pRSNWPA->len + WLAN_IEHDR_LEN;
+        // copy to AssocInfo. for OID_802_11_ASSOCIATION_INFORMATION
+        pMgmt->sAssocInfo.AssocInfo.RequestIELength += sFrame.pRSNWPA->len + WLAN_IEHDR_LEN;
+        MEMvCopy(pbyIEs, sFrame.pRSNWPA, sFrame.pRSNWPA->len + WLAN_IEHDR_LEN);
+        pbyIEs += sFrame.pRSNWPA->len + WLAN_IEHDR_LEN;
+
+    } else if (((pMgmt->eAuthenMode == WMAC_AUTH_WPA2) ||
+                (pMgmt->eAuthenMode == WMAC_AUTH_WPA2PSK)) &&
+               (pMgmt->pCurrBSS != NULL)) {
+        UINT                ii;
+        PWORD               pwPMKID;
+
+        /* WPA IE */
+        sFrame.pRSN = (PWLAN_IE_RSN)(sFrame.pBuf + sFrame.len);
+        sFrame.pRSN->byElementID = WLAN_EID_RSN;
+        sFrame.pRSN->len = 6; //Version(2)+GK(4)
+        sFrame.pRSN->wVersion = 1;
+        //Group Key Cipher Suite
+        sFrame.pRSN->abyRSN[0] = 0x00;
+        sFrame.pRSN->abyRSN[1] = 0x0F;
+        sFrame.pRSN->abyRSN[2] = 0xAC;
+        if (pMgmt->byCSSGK == KEY_CTL_WEP) {
+            sFrame.pRSN->abyRSN[3] = pMgmt->pCurrBSS->byCSSGK;
+        } else if (pMgmt->byCSSGK == KEY_CTL_TKIP) {
+            sFrame.pRSN->abyRSN[3] = WLAN_11i_CSS_TKIP;
+        } else if (pMgmt->byCSSGK == KEY_CTL_CCMP) {
+            sFrame.pRSN->abyRSN[3] = WLAN_11i_CSS_CCMP;
+        } else {
+            sFrame.pRSN->abyRSN[3] = WLAN_11i_CSS_UNKNOWN;
+        }
+
+        // Pairwise Key Cipher Suite
+        sFrame.pRSN->abyRSN[4] = 1;
+        sFrame.pRSN->abyRSN[5] = 0;
+        sFrame.pRSN->abyRSN[6] = 0x00;
+        sFrame.pRSN->abyRSN[7] = 0x0F;
+        sFrame.pRSN->abyRSN[8] = 0xAC;
+        if (pMgmt->byCSSPK == KEY_CTL_TKIP) {
+            sFrame.pRSN->abyRSN[9] = WLAN_11i_CSS_TKIP;
+        } else if (pMgmt->byCSSPK == KEY_CTL_CCMP) {
+            sFrame.pRSN->abyRSN[9] = WLAN_11i_CSS_CCMP;
+        } else if (pMgmt->byCSSPK == KEY_CTL_NONE) {
+            sFrame.pRSN->abyRSN[9] = WLAN_11i_CSS_USE_GROUP;
+        } else {
+            sFrame.pRSN->abyRSN[9] = WLAN_11i_CSS_UNKNOWN;
+        }
+        sFrame.pRSN->len += 6;
+
+        // Auth Key Management Suite
+        sFrame.pRSN->abyRSN[10] = 1;
+        sFrame.pRSN->abyRSN[11] = 0;
+        sFrame.pRSN->abyRSN[12] = 0x00;
+        sFrame.pRSN->abyRSN[13] = 0x0F;
+        sFrame.pRSN->abyRSN[14] = 0xAC;
+        if (pMgmt->eAuthenMode == WMAC_AUTH_WPA2PSK) {
+            sFrame.pRSN->abyRSN[15] = WLAN_11i_AKMSS_PSK;
+        } else if (pMgmt->eAuthenMode == WMAC_AUTH_WPA2) {
+            sFrame.pRSN->abyRSN[15] = WLAN_11i_AKMSS_802_1X;
+        } else {
+            sFrame.pRSN->abyRSN[15] = WLAN_11i_AKMSS_UNKNOWN;
+        }
+        sFrame.pRSN->len +=6;
+
+        // RSN Capabilites
+        if (pMgmt->pCurrBSS->sRSNCapObj.bRSNCapExist == TRUE) {
+            MEMvCopy(&sFrame.pRSN->abyRSN[16], &pMgmt->pCurrBSS->sRSNCapObj.wRSNCap, 2);
+        } else {
+            sFrame.pRSN->abyRSN[16] = 0;
+            sFrame.pRSN->abyRSN[17] = 0;
+        }
+        sFrame.pRSN->len +=2;
+
+        if ((pDevice->gsPMKID.BSSIDInfoCount > 0) && (pDevice->bRoaming == TRUE) && (pMgmt->eAuthenMode == WMAC_AUTH_WPA2)) {
+            // RSN PMKID
+            pbyRSN = &sFrame.pRSN->abyRSN[18];
+            pwPMKID = (PWORD)pbyRSN; // Point to PMKID count
+            *pwPMKID = 0;            // Initialize PMKID count
+            pbyRSN += 2;             // Point to PMKID list
+            for (ii = 0; ii < pDevice->gsPMKID.BSSIDInfoCount; ii++) {
+                if (MEMEqualMemory(&pDevice->gsPMKID.BSSIDInfo[ii].BSSID[0], pMgmt->abyCurrBSSID, U_ETHER_ADDR_LEN)) {
+                    (*pwPMKID) ++;
+                    MEMvCopy(pbyRSN, pDevice->gsPMKID.BSSIDInfo[ii].PMKID, 16);
+                    pbyRSN += 16;
+                }
+            }
+            if (*pwPMKID != 0) {
+                sFrame.pRSN->len += (2 + (*pwPMKID)*16);
+            }
+        }
+
+        sFrame.len += sFrame.pRSN->len + WLAN_IEHDR_LEN;
+        // copy to AssocInfo. for OID_802_11_ASSOCIATION_INFORMATION
+        pMgmt->sAssocInfo.AssocInfo.RequestIELength += sFrame.pRSN->len + WLAN_IEHDR_LEN;
+        MEMvCopy(pbyIEs, sFrame.pRSN, sFrame.pRSN->len + WLAN_IEHDR_LEN);
+        pbyIEs += sFrame.pRSN->len + WLAN_IEHDR_LEN;
+    }
+
+
+    /* Adjust the length fields */
+    pTxPacket->cbMPDULen = sFrame.len;
+    pTxPacket->cbPayloadLen = sFrame.len - WLAN_HDR_ADDR3_LEN;
+
+    return pTxPacket;
+}
+
+
+
+/*+
+ *
+ * Routine Description:
+ *  Constructs an assoc-response frame
+ *
+ *
+ * Return Value:
+ *    PTR to frame; or NULL on allocation failue
+ *
+-*/
+
+
+PSTxMgmtPacket
+s_MgrMakeAssocResponse(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN WORD wCurrCapInfo,
+    IN WORD wAssocStatus,
+    IN WORD wAssocAID,
+    IN PBYTE pDstAddr,
+    IN PWLAN_IE_SUPP_RATES pCurrSuppRates,
+    IN PWLAN_IE_SUPP_RATES pCurrExtSuppRates
+    )
+{
+    PSTxMgmtPacket      pTxPacket = NULL;
+    WLAN_FR_ASSOCRESP   sFrame;
+
+
+    pTxPacket = (PSTxMgmtPacket)pMgmt->pbyMgmtPacketPool;
+    memset(pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_ASSOCREQ_FR_MAXLEN);
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+    // Setup the sFrame structure
+    sFrame.pBuf = (PBYTE)pTxPacket->p80211Header;
+    sFrame.len = WLAN_REASSOCRESP_FR_MAXLEN;
+    vMgrEncodeAssocResponse(&sFrame);
+    // Setup the header
+    sFrame.pHdr->sA3.wFrameCtl = cpu_to_le16(
+        (
+        WLAN_SET_FC_FTYPE(WLAN_TYPE_MGR) |
+        WLAN_SET_FC_FSTYPE(WLAN_FSTYPE_ASSOCRESP)
+        ));
+    memcpy( sFrame.pHdr->sA3.abyAddr1, pDstAddr, WLAN_ADDR_LEN);
+    memcpy( sFrame.pHdr->sA3.abyAddr2, pMgmt->abyMACAddr, WLAN_ADDR_LEN);
+    memcpy( sFrame.pHdr->sA3.abyAddr3, pMgmt->abyCurrBSSID, WLAN_BSSID_LEN);
+
+    *sFrame.pwCapInfo = cpu_to_le16(wCurrCapInfo);
+    *sFrame.pwStatus = cpu_to_le16(wAssocStatus);
+    *sFrame.pwAid = cpu_to_le16((WORD)(wAssocAID | BIT14 | BIT15));
+
+    // Copy the rate set
+    sFrame.pSuppRates = (PWLAN_IE_SUPP_RATES)(sFrame.pBuf + sFrame.len);
+    sFrame.len += ((PWLAN_IE_SUPP_RATES)pCurrSuppRates)->len + WLAN_IEHDR_LEN;
+    memcpy(sFrame.pSuppRates,
+           pCurrSuppRates,
+           ((PWLAN_IE_SUPP_RATES)pCurrSuppRates)->len + WLAN_IEHDR_LEN
+          );
+
+    if (((PWLAN_IE_SUPP_RATES)pCurrExtSuppRates)->len != 0) {
+        sFrame.pExtSuppRates = (PWLAN_IE_SUPP_RATES)(sFrame.pBuf + sFrame.len);
+        sFrame.len += ((PWLAN_IE_SUPP_RATES)pCurrExtSuppRates)->len + WLAN_IEHDR_LEN;
+        MEMvCopy(sFrame.pExtSuppRates,
+             pCurrExtSuppRates,
+             ((PWLAN_IE_SUPP_RATES)pCurrExtSuppRates)->len + WLAN_IEHDR_LEN
+             );
+    }
+
+    // Adjust the length fields
+    pTxPacket->cbMPDULen = sFrame.len;
+    pTxPacket->cbPayloadLen = sFrame.len - WLAN_HDR_ADDR3_LEN;
+
+    return pTxPacket;
+}
+
+
+/*+
+ *
+ * Routine Description:
+ *  Constructs an reassoc-response frame
+ *
+ *
+ * Return Value:
+ *    PTR to frame; or NULL on allocation failue
+ *
+-*/
+
+
+PSTxMgmtPacket
+s_MgrMakeReAssocResponse(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN WORD wCurrCapInfo,
+    IN WORD wAssocStatus,
+    IN WORD wAssocAID,
+    IN PBYTE pDstAddr,
+    IN PWLAN_IE_SUPP_RATES pCurrSuppRates,
+    IN PWLAN_IE_SUPP_RATES pCurrExtSuppRates
+    )
+{
+    PSTxMgmtPacket      pTxPacket = NULL;
+    WLAN_FR_REASSOCRESP   sFrame;
+
+
+    pTxPacket = (PSTxMgmtPacket)pMgmt->pbyMgmtPacketPool;
+    memset(pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_ASSOCREQ_FR_MAXLEN);
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+    // Setup the sFrame structure
+    sFrame.pBuf = (PBYTE)pTxPacket->p80211Header;
+    sFrame.len = WLAN_REASSOCRESP_FR_MAXLEN;
+    vMgrEncodeReassocResponse(&sFrame);
+    // Setup the header
+    sFrame.pHdr->sA3.wFrameCtl = cpu_to_le16(
+        (
+        WLAN_SET_FC_FTYPE(WLAN_TYPE_MGR) |
+        WLAN_SET_FC_FSTYPE(WLAN_FSTYPE_REASSOCRESP)
+        ));
+    memcpy( sFrame.pHdr->sA3.abyAddr1, pDstAddr, WLAN_ADDR_LEN);
+    memcpy( sFrame.pHdr->sA3.abyAddr2, pMgmt->abyMACAddr, WLAN_ADDR_LEN);
+    memcpy( sFrame.pHdr->sA3.abyAddr3, pMgmt->abyCurrBSSID, WLAN_BSSID_LEN);
+
+    *sFrame.pwCapInfo = cpu_to_le16(wCurrCapInfo);
+    *sFrame.pwStatus = cpu_to_le16(wAssocStatus);
+    *sFrame.pwAid = cpu_to_le16((WORD)(wAssocAID | BIT14 | BIT15));
+
+    // Copy the rate set
+    sFrame.pSuppRates = (PWLAN_IE_SUPP_RATES)(sFrame.pBuf + sFrame.len);
+    sFrame.len += ((PWLAN_IE_SUPP_RATES)pCurrSuppRates)->len + WLAN_IEHDR_LEN;
+    memcpy(sFrame.pSuppRates,
+             pCurrSuppRates,
+             ((PWLAN_IE_SUPP_RATES)pCurrSuppRates)->len + WLAN_IEHDR_LEN
+             );
+
+    if (((PWLAN_IE_SUPP_RATES)pCurrExtSuppRates)->len != 0) {
+        sFrame.pExtSuppRates = (PWLAN_IE_SUPP_RATES)(sFrame.pBuf + sFrame.len);
+        sFrame.len += ((PWLAN_IE_SUPP_RATES)pCurrExtSuppRates)->len + WLAN_IEHDR_LEN;
+        MEMvCopy(sFrame.pExtSuppRates,
+             pCurrExtSuppRates,
+             ((PWLAN_IE_SUPP_RATES)pCurrExtSuppRates)->len + WLAN_IEHDR_LEN
+             );
+    }
+
+    // Adjust the length fields
+    pTxPacket->cbMPDULen = sFrame.len;
+    pTxPacket->cbPayloadLen = sFrame.len - WLAN_HDR_ADDR3_LEN;
+
+    return pTxPacket;
+}
+
+
+/*+
+ *
+ * Routine Description:
+ *  Handles probe response management frames.
+ *
+ *
+ * Return Value:
+ *    none.
+ *
+-*/
+
+static
+VOID
+s_vMgrRxProbeResponse(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PSRxMgmtPacket pRxPacket
+    )
+{
+    PKnownBSS           pBSSList = NULL;
+    WLAN_FR_PROBERESP   sFrame;
+    BYTE                byCurrChannel = pRxPacket->byRxChannel;
+    ERPObject           sERP;
+    BYTE                byIEChannel = 0;
+    BOOL                bChannelHit = TRUE;
+
+
+    memset(&sFrame, 0, sizeof(WLAN_FR_PROBERESP));
+    // decode the frame
+    sFrame.len = pRxPacket->cbMPDULen;
+    sFrame.pBuf = (PBYTE)pRxPacket->p80211Header;
+    vMgrDecodeProbeResponse(&sFrame);
+
+    if ((sFrame.pqwTimestamp == 0) ||
+        (sFrame.pwBeaconInterval == 0) ||
+        (sFrame.pwCapInfo == 0) ||
+        (sFrame.pSSID == 0) ||
+        (sFrame.pSuppRates == 0)) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Probe resp:Fail addr:[%p] \n", pRxPacket->p80211Header);
+        DBG_PORT80(0xCC);
+        return;
+    };
+
+    if(sFrame.pSSID->len == 0)
+       DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Rx Probe resp: SSID len = 0 \n");
+
+    if (sFrame.pDSParms != 0) {
+        if (byCurrChannel > CB_MAX_CHANNEL_24G) {
+            // channel remapping to
+            byIEChannel = CARDbyGetChannelMapping(pMgmt->pAdapter, sFrame.pDSParms->byCurrChannel, PHY_TYPE_11A);
+        } else {
+            byIEChannel = sFrame.pDSParms->byCurrChannel;
+        }
+        if (byCurrChannel != byIEChannel) {
+            // adjust channel info. bcs we rcv adjcent channel pakckets
+            bChannelHit = FALSE;
+            byCurrChannel = byIEChannel;
+        }
+    } else {
+        // no DS channel info
+        bChannelHit = TRUE;
+    }
+
+//2008-0730-01<Add>by MikeLiu
+if(ChannelExceedZoneType(pDevice,byCurrChannel)==TRUE)
+      return;
+
+    if (sFrame.pERP != NULL) {
+        sERP.byERP = sFrame.pERP->byContext;
+        sERP.bERPExist = TRUE;
+    } else {
+        sERP.bERPExist = FALSE;
+        sERP.byERP = 0;
+    }
+
+
+    // update or insert the bss
+    pBSSList = BSSpAddrIsInBSSList((HANDLE)pDevice, sFrame.pHdr->sA3.abyAddr3, sFrame.pSSID);
+    if (pBSSList) {
+        BSSbUpdateToBSSList((HANDLE)pDevice,
+                            *sFrame.pqwTimestamp,
+                            *sFrame.pwBeaconInterval,
+                            *sFrame.pwCapInfo,
+                            byCurrChannel,
+                            bChannelHit,
+                            sFrame.pSSID,
+                            sFrame.pSuppRates,
+                            sFrame.pExtSuppRates,
+                            &sERP,
+                            sFrame.pRSN,
+                            sFrame.pRSNWPA,
+                            sFrame.pIE_Country,
+                            sFrame.pIE_Quiet,
+                            pBSSList,
+                            sFrame.len - WLAN_HDR_ADDR3_LEN,
+                            sFrame.pHdr->sA4.abyAddr4,   // payload of probresponse
+                            (HANDLE)pRxPacket
+                           );
+    }
+    else {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Probe resp/insert: RxChannel = : %d\n", byCurrChannel);
+        BSSbInsertToBSSList((HANDLE)pDevice,
+                            sFrame.pHdr->sA3.abyAddr3,
+                            *sFrame.pqwTimestamp,
+                            *sFrame.pwBeaconInterval,
+                            *sFrame.pwCapInfo,
+                            byCurrChannel,
+                            sFrame.pSSID,
+                            sFrame.pSuppRates,
+                            sFrame.pExtSuppRates,
+                            &sERP,
+                            sFrame.pRSN,
+                            sFrame.pRSNWPA,
+                            sFrame.pIE_Country,
+                            sFrame.pIE_Quiet,
+                            sFrame.len - WLAN_HDR_ADDR3_LEN,
+                            sFrame.pHdr->sA4.abyAddr4,   // payload of beacon
+                            (HANDLE)pRxPacket
+                           );
+    }
+    return;
+
+}
+
+/*+
+ *
+ * Routine Description:(AP)or(Ad-hoc STA)
+ *  Handles probe request management frames.
+ *
+ *
+ * Return Value:
+ *    none.
+ *
+-*/
+
+
+static
+VOID
+s_vMgrRxProbeRequest(
+    IN PSDevice pDevice,
+    IN PSMgmtObject pMgmt,
+    IN PSRxMgmtPacket pRxPacket
+    )
+{
+    WLAN_FR_PROBEREQ    sFrame;
+    CMD_STATUS          Status;
+    PSTxMgmtPacket      pTxPacket;
+    BYTE                byPHYType = BB_TYPE_11B;
+
+    // STA in Ad-hoc mode: when latest TBTT beacon transmit success,
+    // STA have to response this request.
+    if ((pMgmt->eCurrMode == WMAC_MODE_ESS_AP) ||
+        ((pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) && pDevice->bBeaconSent)) {
+
+        memset(&sFrame, 0, sizeof(WLAN_FR_PROBEREQ));
+        // decode the frame
+        sFrame.len = pRxPacket->cbMPDULen;
+        sFrame.pBuf = (PBYTE)pRxPacket->p80211Header;
+        vMgrDecodeProbeRequest(&sFrame);
+/*
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Probe request rx:MAC addr:%02x-%02x-%02x=%02x-%02x-%02x \n",
+                  sFrame.pHdr->sA3.abyAddr2[0],
+                  sFrame.pHdr->sA3.abyAddr2[1],
+                  sFrame.pHdr->sA3.abyAddr2[2],
+                  sFrame.pHdr->sA3.abyAddr2[3],
+                  sFrame.pHdr->sA3.abyAddr2[4],
+                  sFrame.pHdr->sA3.abyAddr2[5]
+                );
+*/
+        if (sFrame.pSSID->len != 0) {
+            if (sFrame.pSSID->len != ((PWLAN_IE_SSID)pMgmt->abyCurrSSID)->len)
+                return;
+            if (memcmp(sFrame.pSSID->abySSID,
+                       ((PWLAN_IE_SSID)pMgmt->abyCurrSSID)->abySSID,
+                       ((PWLAN_IE_SSID)pMgmt->abyCurrSSID)->len) != 0) {
+                       return;
+            }
+        }
+
+        if ((sFrame.pSuppRates->len > 4) || (sFrame.pExtSuppRates != NULL)) {
+            byPHYType = BB_TYPE_11G;
+        }
+
+        // Probe response reply..
+        pTxPacket = s_MgrMakeProbeResponse
+                    (
+                      pDevice,
+                      pMgmt,
+                      pMgmt->wCurrCapInfo,
+                      pMgmt->wCurrBeaconPeriod,
+                      pMgmt->uCurrChannel,
+                      0,
+                      sFrame.pHdr->sA3.abyAddr2,
+                      (PWLAN_IE_SSID)pMgmt->abyCurrSSID,
+                      (PBYTE)pMgmt->abyCurrBSSID,
+                      (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
+                      (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrExtSuppRates,
+                       byPHYType
+                    );
+        if (pTxPacket != NULL ){
+            /* send the frame */
+            Status = csMgmt_xmit(pDevice, pTxPacket);
+            if (Status != CMD_STATUS_PENDING) {
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Mgt:Probe response tx failed\n");
+            }
+            else {
+//                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Mgt:Probe response tx sending..\n");
+            }
+        }
+    }
+
+    return;
+}
+
+
+
+
+
+/*+
+ *
+ * Routine Description:
+ *
+ *  Entry point for the reception and handling of 802.11 management
+ *  frames. Makes a determination of the frame type and then calls
+ *  the appropriate function.
+ *
+ *
+ * Return Value:
+ *    none.
+ *
+-*/
+
+
+VOID
+vMgrRxManagePacket(
+    IN  HANDLE hDeviceContext,
+    IN PSMgmtObject pMgmt,
+    IN PSRxMgmtPacket pRxPacket
+     )
+{
+    PSDevice    pDevice = (PSDevice)hDeviceContext;
+    BOOL        bInScan = FALSE;
+    UINT        uNodeIndex = 0;
+    NODE_STATE  eNodeState = 0;
+    CMD_STATUS  Status;
+
+
+    if (pMgmt->eCurrMode == WMAC_MODE_ESS_AP) {
+        if (BSSDBbIsSTAInNodeDB(pMgmt, pRxPacket->p80211Header->sA3.abyAddr2, &uNodeIndex))
+            eNodeState = pMgmt->sNodeDBTable[uNodeIndex].eNodeState;
+    }
+
+    switch( WLAN_GET_FC_FSTYPE((pRxPacket->p80211Header->sA3.wFrameCtl)) ){
+
+        case WLAN_FSTYPE_ASSOCREQ:
+            // Frame Clase = 2
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "rx assocreq\n");
+            if (eNodeState < NODE_AUTH) {
+                // send deauth notification
+                // reason = (6) class 2 received from nonauth sta
+                vMgrDeAuthenBeginSta(pDevice,
+                                     pMgmt,
+                                     pRxPacket->p80211Header->sA3.abyAddr2,
+                                     (6),
+                                     &Status
+                                     );
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "wmgr: send vMgrDeAuthenBeginSta 1\n");
+            }
+            else {
+                s_vMgrRxAssocRequest(pDevice, pMgmt, pRxPacket, uNodeIndex);
+            }
+            break;
+
+        case WLAN_FSTYPE_ASSOCRESP:
+            // Frame Clase = 2
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "rx assocresp1\n");
+            s_vMgrRxAssocResponse(pDevice, pMgmt, pRxPacket, FALSE);
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "rx assocresp2\n");
+            break;
+
+        case WLAN_FSTYPE_REASSOCREQ:
+            // Frame Clase = 2
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "rx reassocreq\n");
+            // Todo: reassoc
+            if (eNodeState < NODE_AUTH) {
+                // send deauth notification
+                // reason = (6) class 2 received from nonauth sta
+                vMgrDeAuthenBeginSta(pDevice,
+                                     pMgmt,
+                                     pRxPacket->p80211Header->sA3.abyAddr2,
+                                     (6),
+                                     &Status
+                                     );
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "wmgr: send vMgrDeAuthenBeginSta 2\n");
+
+            }
+            s_vMgrRxReAssocRequest(pDevice, pMgmt, pRxPacket, uNodeIndex);
+            break;
+
+        case WLAN_FSTYPE_REASSOCRESP:
+            // Frame Clase = 2
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "rx reassocresp\n");
+            s_vMgrRxAssocResponse(pDevice, pMgmt, pRxPacket, TRUE);
+            break;
+
+        case WLAN_FSTYPE_PROBEREQ:
+            // Frame Clase = 0
+            //DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "rx probereq\n");
+            s_vMgrRxProbeRequest(pDevice, pMgmt, pRxPacket);
+            break;
+
+        case WLAN_FSTYPE_PROBERESP:
+            // Frame Clase = 0
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "rx proberesp\n");
+
+            s_vMgrRxProbeResponse(pDevice, pMgmt, pRxPacket);
+            break;
+
+        case WLAN_FSTYPE_BEACON:
+            // Frame Clase = 0
+            // DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "rx beacon\n");
+            if (pMgmt->eScanState != WMAC_NO_SCANNING) {
+                bInScan = TRUE;
+            };
+            s_vMgrRxBeacon(pDevice, pMgmt, pRxPacket, bInScan);
+            break;
+
+        case WLAN_FSTYPE_ATIM:
+            // Frame Clase = 1
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "rx atim\n");
+            break;
+
+        case WLAN_FSTYPE_DISASSOC:
+            // Frame Clase = 2
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "rx disassoc\n");
+            if (eNodeState < NODE_AUTH) {
+                // send deauth notification
+                // reason = (6) class 2 received from nonauth sta
+                vMgrDeAuthenBeginSta(pDevice,
+                                     pMgmt,
+                                     pRxPacket->p80211Header->sA3.abyAddr2,
+                                     (6),
+                                     &Status
+                                     );
+                DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "wmgr: send vMgrDeAuthenBeginSta 3\n");
+            }
+            s_vMgrRxDisassociation(pDevice, pMgmt, pRxPacket);
+            break;
+
+        case WLAN_FSTYPE_AUTHEN:
+            // Frame Clase = 1
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO  "rx authen\n");
+            s_vMgrRxAuthentication(pDevice, pMgmt, pRxPacket);
+            break;
+
+        case WLAN_FSTYPE_DEAUTHEN:
+            // Frame Clase = 1
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "rx deauthen\n");
+            s_vMgrRxDeauthentication(pDevice, pMgmt, pRxPacket);
+            break;
+
+        default:
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "rx unknown mgmt\n");
+    }
+
+    return;
+}
+
+
+
+
+/*+
+ *
+ * Routine Description:
+ *
+ *
+ *  Prepare beacon to send
+ *
+ * Return Value:
+ *    TRUE if success; FALSE if failed.
+ *
+-*/
+BOOL
+bMgrPrepareBeaconToSend(
+    IN HANDLE hDeviceContext,
+    IN PSMgmtObject pMgmt
+    )
+{
+    PSDevice            pDevice = (PSDevice)hDeviceContext;
+    PSTxMgmtPacket      pTxPacket;
+
+//    pDevice->bBeaconBufReady = FALSE;
+    if (pDevice->bEncryptionEnable || pDevice->bEnable8021x){
+        pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_PRIVACY(1);
+    }
+    else {
+        pMgmt->wCurrCapInfo &= ~WLAN_SET_CAP_INFO_PRIVACY(1);
+    }
+    pTxPacket = s_MgrMakeBeacon
+                (
+                  pDevice,
+                  pMgmt,
+                  pMgmt->wCurrCapInfo,
+                  pMgmt->wCurrBeaconPeriod,
+                  pMgmt->uCurrChannel,
+                  pMgmt->wCurrATIMWindow, //0,
+                  (PWLAN_IE_SSID)pMgmt->abyCurrSSID,
+                  (PBYTE)pMgmt->abyCurrBSSID,
+                  (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
+                  (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrExtSuppRates
+                );
+
+    if ((pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) &&
+        (pMgmt->abyCurrBSSID[0] == 0))
+        return FALSE;
+
+    csBeacon_xmit(pDevice, pTxPacket);
+
+    return TRUE;
+}
+
+
+
+
+/*+
+ *
+ * Routine Description:
+ *
+ *  Log a warning message based on the contents of the Status
+ *  Code field of an 802.11 management frame.  Defines are
+ *  derived from 802.11-1997 SPEC.
+ *
+ * Return Value:
+ *    none.
+ *
+-*/
+static
+VOID
+s_vMgrLogStatus(
+    IN PSMgmtObject pMgmt,
+    IN WORD  wStatus
+    )
+{
+    switch( wStatus ){
+        case WLAN_MGMT_STATUS_UNSPEC_FAILURE:
+            DEVICE_PRT(MSG_LEVEL_NOTICE, KERN_INFO "Status code == Unspecified error.\n");
+            break;
+        case WLAN_MGMT_STATUS_CAPS_UNSUPPORTED:
+            DEVICE_PRT(MSG_LEVEL_NOTICE, KERN_INFO "Status code == Can't support all requested capabilities.\n");
+            break;
+        case WLAN_MGMT_STATUS_REASSOC_NO_ASSOC:
+            DEVICE_PRT(MSG_LEVEL_NOTICE, KERN_INFO "Status code == Reassoc denied, can't confirm original Association.\n");
+            break;
+        case WLAN_MGMT_STATUS_ASSOC_DENIED_UNSPEC:
+            DEVICE_PRT(MSG_LEVEL_NOTICE, KERN_INFO "Status code == Assoc denied, undefine in spec\n");
+            break;
+        case WLAN_MGMT_STATUS_UNSUPPORTED_AUTHALG:
+            DEVICE_PRT(MSG_LEVEL_NOTICE, KERN_INFO "Status code == Peer doesn't support authen algorithm.\n");
+            break;
+        case WLAN_MGMT_STATUS_RX_AUTH_NOSEQ:
+            DEVICE_PRT(MSG_LEVEL_NOTICE, KERN_INFO "Status code == Authen frame received out of sequence.\n");
+            break;
+        case WLAN_MGMT_STATUS_CHALLENGE_FAIL:
+            DEVICE_PRT(MSG_LEVEL_NOTICE, KERN_INFO "Status code == Authen rejected, challenge  failure.\n");
+            break;
+        case WLAN_MGMT_STATUS_AUTH_TIMEOUT:
+            DEVICE_PRT(MSG_LEVEL_NOTICE, KERN_INFO "Status code == Authen rejected, timeout waiting for next frame.\n");
+            break;
+        case WLAN_MGMT_STATUS_ASSOC_DENIED_BUSY:
+            DEVICE_PRT(MSG_LEVEL_NOTICE, KERN_INFO "Status code == Assoc denied, AP too busy.\n");
+            break;
+        case WLAN_MGMT_STATUS_ASSOC_DENIED_RATES:
+            DEVICE_PRT(MSG_LEVEL_NOTICE, KERN_INFO "Status code == Assoc denied, we haven't enough basic rates.\n");
+            break;
+        case WLAN_MGMT_STATUS_ASSOC_DENIED_SHORTPREAMBLE:
+            DEVICE_PRT(MSG_LEVEL_NOTICE, KERN_INFO "Status code == Assoc denied, we do not support short preamble.\n");
+            break;
+        case WLAN_MGMT_STATUS_ASSOC_DENIED_PBCC:
+            DEVICE_PRT(MSG_LEVEL_NOTICE, KERN_INFO "Status code == Assoc denied, we do not support PBCC.\n");
+            break;
+        case WLAN_MGMT_STATUS_ASSOC_DENIED_AGILITY:
+            DEVICE_PRT(MSG_LEVEL_NOTICE, KERN_INFO "Status code == Assoc denied, we do not support channel agility.\n");
+            break;
+        default:
+            DEVICE_PRT(MSG_LEVEL_NOTICE, KERN_INFO "Unknown status code %d.\n", wStatus);
+            break;
+    }
+}
+
+
+/*
+ *
+ * Description:
+ *    Add BSSID in PMKID Candidate list.
+ *
+ * Parameters:
+ *  In:
+ *      hDeviceContext - device structure point
+ *      pbyBSSID - BSSID address for adding
+ *      wRSNCap - BSS's RSN capability
+ *  Out:
+ *      none
+ *
+ * Return Value: none.
+ *
+-*/
+BOOL
+bAdd_PMKID_Candidate (
+    IN HANDLE    hDeviceContext,
+    IN PBYTE          pbyBSSID,
+    IN PSRSNCapObject psRSNCapObj
+    )
+{
+    PSDevice         pDevice = (PSDevice)hDeviceContext;
+    PPMKID_CANDIDATE pCandidateList;
+    UINT             ii = 0;
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"bAdd_PMKID_Candidate START: (%d)\n", (int)pDevice->gsPMKIDCandidate.NumCandidates);
+
+    if ((pDevice == NULL) || (pbyBSSID == NULL) || (psRSNCapObj == NULL))
+        return FALSE;
+
+    if (pDevice->gsPMKIDCandidate.NumCandidates >= MAX_PMKIDLIST)
+        return FALSE;
+
+
+
+    // Update Old Candidate
+    for (ii = 0; ii < pDevice->gsPMKIDCandidate.NumCandidates; ii++) {
+        pCandidateList = &pDevice->gsPMKIDCandidate.CandidateList[ii];
+        if (MEMEqualMemory(pCandidateList->BSSID, pbyBSSID, U_ETHER_ADDR_LEN)) {
+            if ((psRSNCapObj->bRSNCapExist == TRUE) && (psRSNCapObj->wRSNCap & BIT0)) {
+                pCandidateList->Flags |= NDIS_802_11_PMKID_CANDIDATE_PREAUTH_ENABLED;
+            } else {
+                pCandidateList->Flags &= ~(NDIS_802_11_PMKID_CANDIDATE_PREAUTH_ENABLED);
+            }
+            return TRUE;
+        }
+    }
+
+    // New Candidate
+    pCandidateList = &pDevice->gsPMKIDCandidate.CandidateList[pDevice->gsPMKIDCandidate.NumCandidates];
+    if ((psRSNCapObj->bRSNCapExist == TRUE) && (psRSNCapObj->wRSNCap & BIT0)) {
+        pCandidateList->Flags |= NDIS_802_11_PMKID_CANDIDATE_PREAUTH_ENABLED;
+    } else {
+        pCandidateList->Flags &= ~(NDIS_802_11_PMKID_CANDIDATE_PREAUTH_ENABLED);
+    }
+    MEMvCopy(pCandidateList->BSSID, pbyBSSID, U_ETHER_ADDR_LEN);
+    pDevice->gsPMKIDCandidate.NumCandidates++;
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"NumCandidates:%d\n", (int)pDevice->gsPMKIDCandidate.NumCandidates);
+    return TRUE;
+}
+
+/*
+ *
+ * Description:
+ *    Flush PMKID Candidate list.
+ *
+ * Parameters:
+ *  In:
+ *      hDeviceContext - device structure point
+ *  Out:
+ *      none
+ *
+ * Return Value: none.
+ *
+-*/
+VOID
+vFlush_PMKID_Candidate (
+    IN HANDLE hDeviceContext
+    )
+{
+    PSDevice        pDevice = (PSDevice)hDeviceContext;
+
+    if (pDevice == NULL)
+        return;
+
+    ZERO_MEMORY(&pDevice->gsPMKIDCandidate, sizeof(SPMKIDCandidateEvent));
+}
+
+static BOOL
+s_bCipherMatch (
+    IN PKnownBSS                        pBSSNode,
+    IN NDIS_802_11_ENCRYPTION_STATUS    EncStatus,
+    OUT PBYTE                           pbyCCSPK,
+    OUT PBYTE                           pbyCCSGK
+    )
+{
+    BYTE byMulticastCipher = KEY_CTL_INVALID;
+    BYTE byCipherMask = 0x00;
+    int i;
+
+    if (pBSSNode == NULL)
+        return FALSE;
+
+    // check cap. of BSS
+
+    if ((WLAN_GET_CAP_INFO_PRIVACY(pBSSNode->wCapInfo) != 0) &&
+         (EncStatus == Ndis802_11Encryption1Enabled)) {
+        // default is WEP only
+        byMulticastCipher = KEY_CTL_WEP;
+    }
+
+    if ((WLAN_GET_CAP_INFO_PRIVACY(pBSSNode->wCapInfo) != 0) &&
+        (pBSSNode->bWPA2Valid == TRUE) &&
+        ((EncStatus == Ndis802_11Encryption3Enabled)||(EncStatus == Ndis802_11Encryption2Enabled))) {
+
+        //WPA2
+        // check Group Key Cipher
+        if ((pBSSNode->byCSSGK == WLAN_11i_CSS_WEP40) ||
+            (pBSSNode->byCSSGK == WLAN_11i_CSS_WEP104)) {
+            byMulticastCipher = KEY_CTL_WEP;
+        } else if (pBSSNode->byCSSGK == WLAN_11i_CSS_TKIP) {
+            byMulticastCipher = KEY_CTL_TKIP;
+        } else if (pBSSNode->byCSSGK == WLAN_11i_CSS_CCMP) {
+            byMulticastCipher = KEY_CTL_CCMP;
+        } else {
+            byMulticastCipher = KEY_CTL_INVALID;
+        }
+
+        // check Pairwise Key Cipher
+        for(i=0;i<pBSSNode->wCSSPKCount;i++) {
+            if ((pBSSNode->abyCSSPK[i] == WLAN_11i_CSS_WEP40) ||
+                (pBSSNode->abyCSSPK[i] == WLAN_11i_CSS_WEP104)) {
+                // this should not happen as defined 802.11i
+                byCipherMask |= 0x01;
+            } else if (pBSSNode->abyCSSPK[i] == WLAN_11i_CSS_TKIP) {
+                byCipherMask |= 0x02;
+            } else if (pBSSNode->abyCSSPK[i] == WLAN_11i_CSS_CCMP) {
+                byCipherMask |= 0x04;
+            } else if (pBSSNode->abyCSSPK[i] == WLAN_11i_CSS_USE_GROUP) {
+                // use group key only ignore all others
+                byCipherMask = 0;
+                i = pBSSNode->wCSSPKCount;
+            }
+        }
+    } else if ((WLAN_GET_CAP_INFO_PRIVACY(pBSSNode->wCapInfo) != 0) &&
+                (pBSSNode->bWPAValid == TRUE) &&
+                ((EncStatus == Ndis802_11Encryption3Enabled)||(EncStatus == Ndis802_11Encryption2Enabled))) {
+
+        //WPA
+        // check Group Key Cipher
+        if ((pBSSNode->byGKType == WPA_WEP40) ||
+            (pBSSNode->byGKType == WPA_WEP104)) {
+            byMulticastCipher = KEY_CTL_WEP;
+        } else if (pBSSNode->byGKType == WPA_TKIP) {
+            byMulticastCipher = KEY_CTL_TKIP;
+        } else if (pBSSNode->byGKType == WPA_AESCCMP) {
+            byMulticastCipher = KEY_CTL_CCMP;
+        } else {
+            byMulticastCipher = KEY_CTL_INVALID;
+        }
+
+        // check Pairwise Key Cipher
+        for(i=0;i<pBSSNode->wPKCount;i++) {
+            if (pBSSNode->abyPKType[i] == WPA_TKIP) {
+                byCipherMask |= 0x02;
+            } else if (pBSSNode->abyPKType[i] == WPA_AESCCMP) {
+                byCipherMask |= 0x04;
+            } else if (pBSSNode->abyPKType[i] == WPA_NONE) {
+                // use group key only ignore all others
+                byCipherMask = 0;
+                i = pBSSNode->wPKCount;
+            }
+        }
+    }
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"%d, %d, %d, %d, EncStatus:%d\n",
+        byMulticastCipher, byCipherMask, pBSSNode->bWPAValid, pBSSNode->bWPA2Valid, EncStatus);
+
+    // mask our cap. with BSS
+    if (EncStatus == Ndis802_11Encryption1Enabled) {
+        // For supporting Cisco migration mode, don't care pairwise key cipher
+        if ((byMulticastCipher == KEY_CTL_WEP) &&
+            (byCipherMask == 0)) {
+            *pbyCCSGK = KEY_CTL_WEP;
+            *pbyCCSPK = KEY_CTL_NONE;
+            return TRUE;
+        } else {
+            return FALSE;
+        }
+
+    } else if (EncStatus == Ndis802_11Encryption2Enabled) {
+        if ((byMulticastCipher == KEY_CTL_TKIP) &&
+            (byCipherMask == 0)) {
+            *pbyCCSGK = KEY_CTL_TKIP;
+            *pbyCCSPK = KEY_CTL_NONE;
+            return TRUE;
+        } else if ((byMulticastCipher == KEY_CTL_WEP) &&
+                   ((byCipherMask & 0x02) != 0)) {
+            *pbyCCSGK = KEY_CTL_WEP;
+            *pbyCCSPK = KEY_CTL_TKIP;
+            return TRUE;
+        } else if ((byMulticastCipher == KEY_CTL_TKIP) &&
+                   ((byCipherMask & 0x02) != 0)) {
+            *pbyCCSGK = KEY_CTL_TKIP;
+            *pbyCCSPK = KEY_CTL_TKIP;
+            return TRUE;
+        } else {
+            return FALSE;
+        }
+    } else if (EncStatus == Ndis802_11Encryption3Enabled) {
+        if ((byMulticastCipher == KEY_CTL_CCMP) &&
+            (byCipherMask == 0)) {
+            // When CCMP is enable, "Use group cipher suite" shall not be a valid option.
+            return FALSE;
+        } else if ((byMulticastCipher == KEY_CTL_WEP) &&
+                   ((byCipherMask & 0x04) != 0)) {
+            *pbyCCSGK = KEY_CTL_WEP;
+            *pbyCCSPK = KEY_CTL_CCMP;
+            return TRUE;
+        } else if ((byMulticastCipher == KEY_CTL_TKIP) &&
+                   ((byCipherMask & 0x04) != 0)) {
+            *pbyCCSGK = KEY_CTL_TKIP;
+            *pbyCCSPK = KEY_CTL_CCMP;
+            return TRUE;
+        } else if ((byMulticastCipher == KEY_CTL_CCMP) &&
+                   ((byCipherMask & 0x04) != 0)) {
+            *pbyCCSGK = KEY_CTL_CCMP;
+            *pbyCCSPK = KEY_CTL_CCMP;
+            return TRUE;
+        } else {
+            return FALSE;
+        }
+    }
+    return TRUE;
+}
+
+
diff --git a/drivers/staging/vt6655/wmgr.h b/drivers/staging/vt6655/wmgr.h
new file mode 100644
index 00000000000..5b526ab2d91
--- /dev/null
+++ b/drivers/staging/vt6655/wmgr.h
@@ -0,0 +1,521 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: wmgr.h
+ *
+ * Purpose:
+ *
+ * Author: lyndon chen
+ *
+ * Date: Jan 2, 2003
+ *
+ * Functions:
+ *
+ * Revision History:
+ *
+ */
+
+
+#ifndef __WMGR_H__
+#define __WMGR_H__
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+#if !defined(__80211MGR_H__)
+#include "80211mgr.h"
+#endif
+#if !defined(__80211HDR_H__)
+#include "80211hdr.h"
+#endif
+#if !defined(__WCMD_H__)
+#include "wcmd.h"
+#endif
+#if !defined(__BSSDB_H__)
+#include "bssdb.h"
+#endif
+#if !defined(__CARD_H__)
+#include "card.h"
+#endif
+#if !defined(__WPA2_H__)
+#include "wpa2.h"
+#endif
+#if !defined(__VNTWIFI_H__)
+#include "vntwifi.h"
+#endif
+
+
+
+/*---------------------  Export Definitions -------------------------*/
+
+
+
+// Scan time
+#define PROBE_DELAY                  100  // (us)
+#define SWITCH_CHANNEL_DELAY         200 // (us)
+#define WLAN_SCAN_MINITIME           25   // (ms)
+#define WLAN_SCAN_MAXTIME            100  // (ms)
+#define TRIVIAL_SYNC_DIFFERENCE      0    // (us)
+#define DEFAULT_IBSS_BI              100  // (ms)
+
+#define WCMD_ACTIVE_SCAN_TIME   50 //(ms)
+#define WCMD_PASSIVE_SCAN_TIME  100 //(ms)
+
+
+#define DEFAULT_MSDU_LIFETIME           512  // ms
+#define DEFAULT_MSDU_LIFETIME_RES_64us  8000 // 64us
+
+#define DEFAULT_MGN_LIFETIME            8    // ms
+#define DEFAULT_MGN_LIFETIME_RES_64us   125  // 64us
+
+#define MAKE_BEACON_RESERVED            10  //(us)
+
+
+#define TIM_MULTICAST_MASK           0x01
+#define TIM_BITMAPOFFSET_MASK        0xFE
+#define DEFAULT_DTIM_PERIOD             1
+
+#define AP_LONG_RETRY_LIMIT             4
+
+#define DEFAULT_IBSS_CHANNEL            6  //2.4G
+
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Types  ------------------------------*/
+#define timer_expire(timer,next_tick)   mod_timer(&timer, RUN_AT(next_tick))
+typedef void (*TimerFunction)(ULONG);
+
+
+//+++ NDIS related
+
+typedef UCHAR   NDIS_802_11_MAC_ADDRESS[6];
+typedef struct _NDIS_802_11_AI_REQFI
+{
+    USHORT Capabilities;
+    USHORT ListenInterval;
+    NDIS_802_11_MAC_ADDRESS  CurrentAPAddress;
+} NDIS_802_11_AI_REQFI, *PNDIS_802_11_AI_REQFI;
+
+typedef struct _NDIS_802_11_AI_RESFI
+{
+    USHORT Capabilities;
+    USHORT StatusCode;
+    USHORT AssociationId;
+} NDIS_802_11_AI_RESFI, *PNDIS_802_11_AI_RESFI;
+
+typedef struct _NDIS_802_11_ASSOCIATION_INFORMATION
+{
+    ULONG                   Length;
+    USHORT                  AvailableRequestFixedIEs;
+    NDIS_802_11_AI_REQFI    RequestFixedIEs;
+    ULONG                   RequestIELength;
+    ULONG                   OffsetRequestIEs;
+    USHORT                  AvailableResponseFixedIEs;
+    NDIS_802_11_AI_RESFI    ResponseFixedIEs;
+    ULONG                   ResponseIELength;
+    ULONG                   OffsetResponseIEs;
+} NDIS_802_11_ASSOCIATION_INFORMATION, *PNDIS_802_11_ASSOCIATION_INFORMATION;
+
+
+
+typedef struct tagSAssocInfo {
+    NDIS_802_11_ASSOCIATION_INFORMATION     AssocInfo;
+    BYTE                                    abyIEs[WLAN_BEACON_FR_MAXLEN+WLAN_BEACON_FR_MAXLEN];
+    // store ReqIEs set by OID_802_11_ASSOCIATION_INFORMATION
+    ULONG                                   RequestIELength;
+    BYTE                                    abyReqIEs[WLAN_BEACON_FR_MAXLEN];
+} SAssocInfo, DEF* PSAssocInfo;
+//---
+
+
+/*
+typedef enum tagWMAC_AUTHENTICATION_MODE {
+
+
+    WMAC_AUTH_OPEN,
+    WMAC_AUTH_SHAREKEY,
+    WMAC_AUTH_AUTO,
+    WMAC_AUTH_WPA,
+    WMAC_AUTH_WPAPSK,
+    WMAC_AUTH_WPANONE,
+    WMAC_AUTH_WPA2,
+    WMAC_AUTH_WPA2PSK,
+    WMAC_AUTH_MAX       // Not a real mode, defined as upper bound
+
+
+} WMAC_AUTHENTICATION_MODE, *PWMAC_AUTHENTICATION_MODE;
+*/
+
+
+// Pre-configured Mode (from XP)
+/*
+typedef enum tagWMAC_CONFIG_MODE {
+    WMAC_CONFIG_ESS_STA,
+    WMAC_CONFIG_IBSS_STA,
+    WMAC_CONFIG_AUTO,
+    WMAC_CONFIG_AP
+
+} WMAC_CONFIG_MODE, *PWMAC_CONFIG_MODE;
+*/
+
+typedef enum tagWMAC_SCAN_TYPE {
+
+    WMAC_SCAN_ACTIVE,
+    WMAC_SCAN_PASSIVE,
+    WMAC_SCAN_HYBRID
+
+} WMAC_SCAN_TYPE, *PWMAC_SCAN_TYPE;
+
+
+typedef enum tagWMAC_SCAN_STATE {
+
+    WMAC_NO_SCANNING,
+    WMAC_IS_SCANNING,
+    WMAC_IS_PROBEPENDING
+
+} WMAC_SCAN_STATE, *PWMAC_SCAN_STATE;
+
+
+
+// Notes:
+// Basic Service Set state explained as following:
+// WMAC_STATE_IDLE          : no BSS is selected (Adhoc or Infra)
+// WMAC_STATE_STARTED       : no BSS is selected, start own IBSS (Adhoc only)
+// WMAC_STATE_JOINTED       : BSS is selected and synchronized (Adhoc or Infra)
+// WMAC_STATE_AUTHPENDING   : Authentication pending (Infra)
+// WMAC_STATE_AUTH          : Authenticated (Infra)
+// WMAC_STATE_ASSOCPENDING  : Association pending (Infra)
+// WMAC_STATE_ASSOC         : Associated (Infra)
+
+typedef enum tagWMAC_BSS_STATE {
+
+    WMAC_STATE_IDLE,
+    WMAC_STATE_STARTED,
+    WMAC_STATE_JOINTED,
+    WMAC_STATE_AUTHPENDING,
+    WMAC_STATE_AUTH,
+    WMAC_STATE_ASSOCPENDING,
+    WMAC_STATE_ASSOC
+
+} WMAC_BSS_STATE, *PWMAC_BSS_STATE;
+
+// WMAC selected running mode
+typedef enum tagWMAC_CURRENT_MODE {
+
+    WMAC_MODE_STANDBY,
+    WMAC_MODE_ESS_STA,
+    WMAC_MODE_IBSS_STA,
+    WMAC_MODE_ESS_AP
+
+} WMAC_CURRENT_MODE, *PWMAC_CURRENT_MODE;
+
+/*
+typedef enum tagWMAC_POWER_MODE {
+
+    WMAC_POWER_CAM,
+    WMAC_POWER_FAST,
+    WMAC_POWER_MAX
+
+} WMAC_POWER_MODE, *PWMAC_POWER_MODE;
+*/
+
+
+// Tx Managment Packet descriptor
+typedef struct tagSTxMgmtPacket {
+
+    PUWLAN_80211HDR     p80211Header;
+    UINT                cbMPDULen;
+    UINT                cbPayloadLen;
+
+} STxMgmtPacket, DEF* PSTxMgmtPacket;
+
+
+// Rx Managment Packet descriptor
+typedef struct tagSRxMgmtPacket {
+
+    PUWLAN_80211HDR     p80211Header;
+    QWORD               qwLocalTSF;
+    UINT                cbMPDULen;
+    UINT                cbPayloadLen;
+    UINT                uRSSI;
+    BYTE                bySQ;
+    BYTE                byRxRate;
+    BYTE                byRxChannel;
+
+} SRxMgmtPacket, DEF* PSRxMgmtPacket;
+
+
+
+typedef struct tagSMgmtObject
+{
+
+    PVOID                   pAdapter;
+    // MAC address
+    BYTE                    abyMACAddr[WLAN_ADDR_LEN];
+
+    // Configuration Mode
+    WMAC_CONFIG_MODE        eConfigMode; // MAC pre-configed mode
+    CARD_PHY_TYPE           eCurrentPHYMode;
+    CARD_PHY_TYPE           eConfigPHYMode;
+
+
+    // Operation state variables
+    WMAC_CURRENT_MODE       eCurrMode;   // MAC current connection mode
+    WMAC_BSS_STATE          eCurrState;  // MAC current BSS state
+
+    PKnownBSS               pCurrBSS;
+    BYTE                    byCSSGK;
+    BYTE                    byCSSPK;
+
+//    BYTE                    abyNewSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN];
+//    BYTE                    abyNewExtSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN];
+
+    // Current state vars
+    UINT                    uCurrChannel;
+    BYTE                    abyCurrSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1];
+    BYTE                    abyCurrExtSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1];
+    BYTE                    abyCurrSSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
+    BYTE                    abyCurrBSSID[WLAN_BSSID_LEN];
+    WORD                    wCurrCapInfo;
+    WORD                    wCurrAID;
+    WORD                    wCurrATIMWindow;
+    WORD                    wCurrBeaconPeriod;
+    BOOL                    bIsDS;
+    BYTE                    byERPContext;
+
+    CMD_STATE               eCommandState;
+    UINT                    uScanChannel;
+
+    // Desire joinning BSS vars
+    BYTE                    abyDesireSSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
+    BYTE                    abyDesireBSSID[WLAN_BSSID_LEN];
+
+    // Adhoc or AP configuration vars
+  //BYTE                    abyAdHocSSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
+    WORD                    wIBSSBeaconPeriod;
+    WORD                    wIBSSATIMWindow;
+    UINT                    uIBSSChannel;
+    BYTE                    abyIBSSSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1];
+    BYTE                    byAPBBType;
+    BYTE                    abyWPAIE[MAX_WPA_IE_LEN];
+    WORD                    wWPAIELen;
+
+    UINT                    uAssocCount;
+    BOOL                    bMoreData;
+
+    // Scan state vars
+    WMAC_SCAN_STATE         eScanState;
+    WMAC_SCAN_TYPE          eScanType;
+    UINT                    uScanStartCh;
+    UINT                    uScanEndCh;
+    WORD                    wScanSteps;
+    UINT                    uScanBSSType;
+    // Desire scannig vars
+    BYTE                    abyScanSSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
+    BYTE                    abyScanBSSID[WLAN_BSSID_LEN];
+
+    // Privacy
+    WMAC_AUTHENTICATION_MODE eAuthenMode;
+    WMAC_ENCRYPTION_MODE    eEncryptionMode;
+    BOOL                    bShareKeyAlgorithm;
+    BYTE                    abyChallenge[WLAN_CHALLENGE_LEN];
+    BOOL                    bPrivacyInvoked;
+
+    // Received beacon state vars
+    BOOL                    bInTIM;
+    BOOL                    bMulticastTIM;
+    BYTE                    byDTIMCount;
+    BYTE                    byDTIMPeriod;
+
+    // Power saving state vars
+    WMAC_POWER_MODE         ePSMode;
+    WORD                    wListenInterval;
+    WORD                    wCountToWakeUp;
+    BOOL                    bInTIMWake;
+    PBYTE                   pbyPSPacketPool;
+    BYTE                    byPSPacketPool[sizeof(STxMgmtPacket) + WLAN_NULLDATA_FR_MAXLEN];
+    BOOL                    bRxBeaconInTBTTWake;
+    BYTE                    abyPSTxMap[MAX_NODE_NUM + 1];
+
+    // managment command related
+    UINT                    uCmdBusy;
+    UINT                    uCmdHostAPBusy;
+
+    // managment packet pool
+    PBYTE                   pbyMgmtPacketPool;
+    BYTE                    byMgmtPacketPool[sizeof(STxMgmtPacket) + WLAN_A3FR_MAXLEN];
+
+
+    // One second callback timer
+    struct timer_list	    sTimerSecondCallback;
+
+    // Temporarily Rx Mgmt Packet Descriptor
+    SRxMgmtPacket           sRxPacket;
+
+    // link list of known bss's (scan results)
+    KnownBSS                sBSSList[MAX_BSS_NUM];
+
+
+
+    // table list of known node
+    // sNodeDBList[0] is reserved for AP under Infra mode
+    // sNodeDBList[0] is reserved for Multicast under adhoc/AP mode
+    KnownNodeDB             sNodeDBTable[MAX_NODE_NUM + 1];
+
+
+
+    // WPA2 PMKID Cache
+    SPMKIDCache             gsPMKIDCache;
+    BOOL                    bRoaming;
+
+    // rate fall back vars
+
+
+
+    // associate info
+    SAssocInfo              sAssocInfo;
+
+
+    // for 802.11h
+    BOOL                    b11hEnable;
+    BOOL                    bSwitchChannel;
+    BYTE                    byNewChannel;
+    PWLAN_IE_MEASURE_REP    pCurrMeasureEIDRep;
+    UINT                    uLengthOfRepEIDs;
+    BYTE                    abyCurrentMSRReq[sizeof(STxMgmtPacket) + WLAN_A3FR_MAXLEN];
+    BYTE                    abyCurrentMSRRep[sizeof(STxMgmtPacket) + WLAN_A3FR_MAXLEN];
+    BYTE                    abyIECountry[WLAN_A3FR_MAXLEN];
+    BYTE                    abyIBSSDFSOwner[6];
+    BYTE                    byIBSSDFSRecovery;
+
+    struct sk_buff  skb;
+
+} SMgmtObject, DEF *PSMgmtObject;
+
+
+/*---------------------  Export Macros ------------------------------*/
+
+
+/*---------------------  Export Functions  --------------------------*/
+
+
+void
+vMgrObjectInit(
+    IN  HANDLE hDeviceContext
+    );
+
+void
+vMgrTimerInit(
+    IN  HANDLE hDeviceContext
+    );
+
+VOID
+vMgrObjectReset(
+    IN  HANDLE hDeviceContext
+    );
+
+void
+vMgrAssocBeginSta(
+    IN  HANDLE hDeviceContext,
+    IN  PSMgmtObject pMgmt,
+    OUT PCMD_STATUS pStatus
+    );
+
+VOID
+vMgrReAssocBeginSta(
+    IN  HANDLE hDeviceContext,
+    IN  PSMgmtObject pMgmt,
+    OUT PCMD_STATUS pStatus
+    );
+
+VOID
+vMgrDisassocBeginSta(
+    IN  HANDLE hDeviceContext,
+    IN  PSMgmtObject pMgmt,
+    IN  PBYTE  abyDestAddress,
+    IN  WORD    wReason,
+    OUT PCMD_STATUS pStatus
+    );
+
+VOID
+vMgrAuthenBeginSta(
+    IN  HANDLE hDeviceContext,
+    IN  PSMgmtObject pMgmt,
+    OUT PCMD_STATUS pStatus
+    );
+
+VOID
+vMgrCreateOwnIBSS(
+    IN  HANDLE hDeviceContext,
+    OUT PCMD_STATUS pStatus
+    );
+
+VOID
+vMgrJoinBSSBegin(
+    IN  HANDLE hDeviceContext,
+    OUT PCMD_STATUS pStatus
+    );
+
+VOID
+vMgrRxManagePacket(
+    IN  HANDLE hDeviceContext,
+    IN  PSMgmtObject pMgmt,
+    IN  PSRxMgmtPacket pRxPacket
+    );
+
+/*
+VOID
+vMgrScanBegin(
+    IN  HANDLE hDeviceContext,
+    OUT PCMD_STATUS pStatus
+    );
+*/
+
+VOID
+vMgrDeAuthenBeginSta(
+    IN  HANDLE hDeviceContext,
+    IN  PSMgmtObject  pMgmt,
+    IN  PBYTE   abyDestAddress,
+    IN  WORD    wReason,
+    OUT PCMD_STATUS pStatus
+    );
+
+BOOL
+bMgrPrepareBeaconToSend(
+    IN  HANDLE hDeviceContext,
+    IN  PSMgmtObject pMgmt
+    );
+
+
+BOOL
+bAdd_PMKID_Candidate (
+    IN HANDLE    hDeviceContext,
+    IN PBYTE          pbyBSSID,
+    IN PSRSNCapObject psRSNCapObj
+    );
+
+VOID
+vFlush_PMKID_Candidate (
+    IN HANDLE hDeviceContext
+    );
+
+#endif // __WMGR_H__
diff --git a/drivers/staging/vt6655/wpa.c b/drivers/staging/vt6655/wpa.c
new file mode 100644
index 00000000000..8b4e7fc31ef
--- /dev/null
+++ b/drivers/staging/vt6655/wpa.c
@@ -0,0 +1,339 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: wpa.c
+ *
+ * Purpose: Handles the Basic Service Set & Node Database functions
+ *
+ * Functions:
+ *      WPA_ParseRSN - Parse RSN IE.
+ *
+ * Revision History:
+ *
+ * Author: Kyle Hsu
+ *
+ * Date: July 14, 2003
+ *
+ */
+
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+#if !defined(__UMEM_H__)
+#include "umem.h"
+#endif
+#if !defined(__TMACRO_H__)
+#include "tmacro.h"
+#endif
+#if !defined(__TETHER_H__)
+#include "tether.h"
+#endif
+#if !defined(__DEVICE_H__)
+#include "device.h"
+#endif
+#if !defined(__80211HDR_H__)
+#include "80211hdr.h"
+#endif
+#if !defined(__BSSDB_H__)
+#include "bssdb.h"
+#endif
+#if !defined(__WMGR_H__)
+#include "wmgr.h"
+#endif
+#if !defined(__WPA_H__)
+#include "wpa.h"
+#endif
+#if !defined(__80211MGR_H__)
+#include "80211mgr.h"
+#endif
+
+
+/*---------------------  Static Variables  --------------------------*/
+static int          msglevel                =MSG_LEVEL_INFO;
+
+const BYTE abyOUI00[4] = { 0x00, 0x50, 0xf2, 0x00 };
+const BYTE abyOUI01[4] = { 0x00, 0x50, 0xf2, 0x01 };
+const BYTE abyOUI02[4] = { 0x00, 0x50, 0xf2, 0x02 };
+const BYTE abyOUI03[4] = { 0x00, 0x50, 0xf2, 0x03 };
+const BYTE abyOUI04[4] = { 0x00, 0x50, 0xf2, 0x04 };
+const BYTE abyOUI05[4] = { 0x00, 0x50, 0xf2, 0x05 };
+
+
+/*+
+ *
+ * Description:
+ *    Clear RSN information in BSSList.
+ *
+ * Parameters:
+ *  In:
+ *      pBSSList - BSS list.
+ *  Out:
+ *      none
+ *
+ * Return Value: none.
+ *
+-*/
+
+VOID
+WPA_ClearRSN (
+    IN PKnownBSS        pBSSList
+    )
+{
+    int ii;
+    pBSSList->byGKType = WPA_TKIP;
+    for (ii=0; ii < 4; ii ++)
+        pBSSList->abyPKType[ii] = WPA_TKIP;
+    pBSSList->wPKCount = 0;
+    for (ii=0; ii < 4; ii ++)
+        pBSSList->abyAuthType[ii] = WPA_AUTH_IEEE802_1X;
+    pBSSList->wAuthCount = 0;
+    pBSSList->byDefaultK_as_PK = 0;
+    pBSSList->byReplayIdx = 0;
+    pBSSList->sRSNCapObj.bRSNCapExist = FALSE;
+    pBSSList->sRSNCapObj.wRSNCap = 0;
+    pBSSList->bWPAValid = FALSE;
+}
+
+
+/*+
+ *
+ * Description:
+ *    Parse RSN IE.
+ *
+ * Parameters:
+ *  In:
+ *      pBSSList - BSS list.
+ *      pRSN - Pointer to the RSN IE.
+ *  Out:
+ *      none
+ *
+ * Return Value: none.
+ *
+-*/
+VOID
+WPA_ParseRSN (
+    IN PKnownBSS        pBSSList,
+    IN PWLAN_IE_RSN_EXT pRSN
+    )
+{
+    PWLAN_IE_RSN_AUTH  pIE_RSN_Auth = NULL;
+    int                i, j, m, n = 0;
+    PBYTE              pbyCaps;
+
+    WPA_ClearRSN(pBSSList);
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"WPA_ParseRSN: [%d]\n", pRSN->len);
+
+    // information element header makes sense
+    if ((pRSN->len >= 6) // oui1(4)+ver(2)
+         && (pRSN->byElementID == WLAN_EID_RSN_WPA) && MEMEqualMemory(pRSN->abyOUI, abyOUI01, 4)
+         && (pRSN->wVersion == 1)) {
+
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Legal RSN\n");
+        // update each variable if pRSN is long enough to contain the variable
+        if (pRSN->len >= 10) //oui1(4)+ver(2)+GKSuite(4)
+        {
+            if (MEMEqualMemory(pRSN->abyMulticast, abyOUI01, 4))
+                pBSSList->byGKType = WPA_WEP40;
+            else if (MEMEqualMemory(pRSN->abyMulticast, abyOUI02, 4))
+                pBSSList->byGKType = WPA_TKIP;
+            else if (MEMEqualMemory(pRSN->abyMulticast, abyOUI03, 4))
+                pBSSList->byGKType = WPA_AESWRAP;
+            else if (MEMEqualMemory(pRSN->abyMulticast, abyOUI04, 4))
+                pBSSList->byGKType = WPA_AESCCMP;
+            else if (MEMEqualMemory(pRSN->abyMulticast, abyOUI05, 4))
+                pBSSList->byGKType = WPA_WEP104;
+            else
+                // any vendor checks here
+                pBSSList->byGKType = WPA_NONE;
+
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"byGKType: %x\n", pBSSList->byGKType);
+        }
+
+        if (pRSN->len >= 12) //oui1(4)+ver(2)+GKS(4)+PKSCnt(2)
+        {
+            j = 0;
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"wPKCount: %d, sizeof(pBSSList->abyPKType): %d\n", pRSN->wPKCount, sizeof(pBSSList->abyPKType));
+            for(i = 0; (i < pRSN->wPKCount) && (j < sizeof(pBSSList->abyPKType)/sizeof(BYTE)); i++) {
+                if(pRSN->len >= 12+i*4+4) { //oui1(4)+ver(2)+GKS(4)+PKSCnt(2)+PKS(4*i)
+                    if (MEMEqualMemory(pRSN->PKSList[i].abyOUI, abyOUI00, 4))
+                        pBSSList->abyPKType[j++] = WPA_NONE;
+                    else if (MEMEqualMemory(pRSN->PKSList[i].abyOUI, abyOUI02, 4))
+                        pBSSList->abyPKType[j++] = WPA_TKIP;
+                    else if (MEMEqualMemory(pRSN->PKSList[i].abyOUI, abyOUI03, 4))
+                        pBSSList->abyPKType[j++] = WPA_AESWRAP;
+                    else if (MEMEqualMemory(pRSN->PKSList[i].abyOUI, abyOUI04, 4))
+                        pBSSList->abyPKType[j++] = WPA_AESCCMP;
+                    else
+                        // any vendor checks here
+                        ;
+                }
+                else
+                    break;
+                //DBG_PRN_GRP14(("abyPKType[%d]: %X\n", j-1, pBSSList->abyPKType[j-1]));
+            } //for
+            pBSSList->wPKCount = (WORD)j;
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"wPKCount: %d\n", pBSSList->wPKCount);
+        }
+
+        m = pRSN->wPKCount;
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"m: %d\n", m);
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"14+m*4: %d\n", 14+m*4);
+
+        if (pRSN->len >= 14+m*4) { //oui1(4)+ver(2)+GKS(4)+PKSCnt(2)+PKS(4*m)+AKC(2)
+            // overlay IE_RSN_Auth structure into correct place
+            pIE_RSN_Auth = (PWLAN_IE_RSN_AUTH) pRSN->PKSList[m].abyOUI;
+            j = 0;
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"wAuthCount: %d, sizeof(pBSSList->abyAuthType): %d\n",
+                          pIE_RSN_Auth->wAuthCount, sizeof(pBSSList->abyAuthType));
+            for(i = 0; (i < pIE_RSN_Auth->wAuthCount) && (j < sizeof(pBSSList->abyAuthType)/sizeof(BYTE)); i++) {
+                if(pRSN->len >= 14+4+(m+i)*4) { //oui1(4)+ver(2)+GKS(4)+PKSCnt(2)+PKS(4*m)+AKC(2)+AKS(4*i)
+                    if (MEMEqualMemory(pIE_RSN_Auth->AuthKSList[i].abyOUI, abyOUI01, 4))
+                        pBSSList->abyAuthType[j++] = WPA_AUTH_IEEE802_1X;
+                    else if (MEMEqualMemory(pIE_RSN_Auth->AuthKSList[i].abyOUI, abyOUI02, 4))
+                        pBSSList->abyAuthType[j++] = WPA_AUTH_PSK;
+                    else
+                    // any vendor checks here
+                    ;
+                }
+                else
+                    break;
+                //DBG_PRN_GRP14(("abyAuthType[%d]: %X\n", j-1, pBSSList->abyAuthType[j-1]));
+            }
+            if(j > 0)
+                pBSSList->wAuthCount = (WORD)j;
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"wAuthCount: %d\n", pBSSList->wAuthCount);
+        }
+
+        if (pIE_RSN_Auth != NULL) {
+
+            n = pIE_RSN_Auth->wAuthCount;
+
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"n: %d\n", n);
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"14+4+(m+n)*4: %d\n", 14+4+(m+n)*4);
+
+            if(pRSN->len+2 >= 14+4+(m+n)*4) { //oui1(4)+ver(2)+GKS(4)+PKSCnt(2)+PKS(4*m)+AKC(2)+AKS(4*n)+Cap(2)
+                pbyCaps = (PBYTE)pIE_RSN_Auth->AuthKSList[n].abyOUI;
+                pBSSList->byDefaultK_as_PK = (*pbyCaps) & WPA_GROUPFLAG;
+                pBSSList->byReplayIdx = 2 << ((*pbyCaps >> WPA_REPLAYBITSSHIFT) & WPA_REPLAYBITS);
+                pBSSList->sRSNCapObj.bRSNCapExist = TRUE;
+                pBSSList->sRSNCapObj.wRSNCap = *(PWORD)pbyCaps;
+                //DBG_PRN_GRP14(("pbyCaps: %X\n", *pbyCaps));
+                //DBG_PRN_GRP14(("byDefaultK_as_PK: %X\n", pBSSList->byDefaultK_as_PK));
+                //DBG_PRN_GRP14(("byReplayIdx: %X\n", pBSSList->byReplayIdx));
+            }
+        }
+        pBSSList->bWPAValid = TRUE;
+    }
+}
+
+/*+
+ *
+ * Description:
+ *    Search RSN information in BSSList.
+ *
+ * Parameters:
+ *  In:
+ *      byCmd    - Search type
+ *      byEncrypt- Encrcypt Type
+ *      pBSSList - BSS list
+ *  Out:
+ *      none
+ *
+ * Return Value: none.
+ *
+-*/
+BOOL
+WPA_SearchRSN (
+    BYTE                byCmd,
+    BYTE                byEncrypt,
+    IN PKnownBSS        pBSSList
+    )
+{
+    int ii;
+    BYTE byPKType = WPA_NONE;
+
+    if (pBSSList->bWPAValid == FALSE)
+        return FALSE;
+
+    switch(byCmd) {
+    case 0:
+
+        if (byEncrypt != pBSSList->byGKType)
+            return FALSE;
+
+        if (pBSSList->wPKCount > 0) {
+            for (ii = 0; ii < pBSSList->wPKCount; ii ++) {
+                if (pBSSList->abyPKType[ii] == WPA_AESCCMP)
+                    byPKType = WPA_AESCCMP;
+                else if ((pBSSList->abyPKType[ii] == WPA_TKIP) && (byPKType != WPA_AESCCMP))
+                     byPKType = WPA_TKIP;
+                else if ((pBSSList->abyPKType[ii] == WPA_WEP40) && (byPKType != WPA_AESCCMP) && (byPKType != WPA_TKIP))
+                     byPKType = WPA_WEP40;
+                else if ((pBSSList->abyPKType[ii] == WPA_WEP104) && (byPKType != WPA_AESCCMP) && (byPKType != WPA_TKIP))
+                     byPKType = WPA_WEP104;
+            }
+            if (byEncrypt != byPKType)
+                return FALSE;
+        }
+        return TRUE;
+//        if (pBSSList->wAuthCount > 0)
+//            for (ii=0; ii < pBSSList->wAuthCount; ii ++)
+//                if (byAuth == pBSSList->abyAuthType[ii])
+//                    break;
+        break;
+
+    default:
+        break;
+    }
+    return FALSE;
+}
+
+/*+
+ *
+ * Description:
+ *    Check if RSN IE makes sense.
+ *
+ * Parameters:
+ *  In:
+ *      pRSN - Pointer to the RSN IE.
+ *  Out:
+ *      none
+ *
+ * Return Value: none.
+ *
+-*/
+BOOL
+WPAb_Is_RSN (
+    IN PWLAN_IE_RSN_EXT pRSN
+    )
+{
+    if (pRSN == NULL)
+        return FALSE;
+
+    if ((pRSN->len >= 6) && // oui1(4)+ver(2)
+        (pRSN->byElementID == WLAN_EID_RSN_WPA) && MEMEqualMemory(pRSN->abyOUI, abyOUI01, 4) &&
+        (pRSN->wVersion == 1)) {
+        return TRUE;
+    }
+    else
+        return FALSE;
+}
+
diff --git a/drivers/staging/vt6655/wpa.h b/drivers/staging/vt6655/wpa.h
new file mode 100644
index 00000000000..8000a37c6fc
--- /dev/null
+++ b/drivers/staging/vt6655/wpa.h
@@ -0,0 +1,98 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: wpa.h
+ *
+ * Purpose: Defines the macros, types, and functions for dealing
+ *          with WPA informations.
+ *
+ * Author: Kyle Hsu
+ *
+ * Date: Jul 14, 2003
+ *
+ */
+
+#ifndef __WPA_H__
+#define __WPA_H__
+
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+#if !defined(__80211HDR_H__)
+#include "80211hdr.h"
+#endif
+
+
+/*---------------------  Export Definitions -------------------------*/
+
+#define WPA_NONE            0
+#define WPA_WEP40           1
+#define WPA_TKIP            2
+#define WPA_AESWRAP         3
+#define WPA_AESCCMP         4
+#define WPA_WEP104          5
+#define WPA_AUTH_IEEE802_1X 1
+#define WPA_AUTH_PSK        2
+
+#define WPA_GROUPFLAG       0x02
+#define WPA_REPLAYBITSSHIFT 2
+#define WPA_REPLAYBITS      0x03
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Types  ------------------------------*/
+
+
+/*---------------------  Export Functions  --------------------------*/
+#ifdef __cplusplus
+extern "C" {                            /* Assume C declarations for C++ */
+#endif /* __cplusplus */
+
+VOID
+WPA_ClearRSN(
+    IN PKnownBSS        pBSSList
+    );
+
+VOID
+WPA_ParseRSN(
+    IN PKnownBSS        pBSSList,
+    IN PWLAN_IE_RSN_EXT pRSN
+    );
+
+BOOL
+WPA_SearchRSN(
+    BYTE                byCmd,
+    BYTE                byEncrypt,
+    IN PKnownBSS        pBSSList
+    );
+
+BOOL
+WPAb_Is_RSN(
+    IN PWLAN_IE_RSN_EXT pRSN
+    );
+
+#ifdef __cplusplus
+}                                       /* End of extern "C" { */
+#endif /* __cplusplus */
+
+
+#endif // __WPA_H__
diff --git a/drivers/staging/vt6655/wpa2.c b/drivers/staging/vt6655/wpa2.c
new file mode 100644
index 00000000000..e2fdb331069
--- /dev/null
+++ b/drivers/staging/vt6655/wpa2.c
@@ -0,0 +1,373 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: wpa2.c
+ *
+ * Purpose: Handles the Basic Service Set & Node Database functions
+ *
+ * Functions:
+ *
+ * Revision History:
+ *
+ * Author: Yiching Chen
+ *
+ * Date: Oct. 4, 2004
+ *
+ */
+#if !defined(__WPA2_H__)
+#include "wpa2.h"
+#endif
+#if !defined(__UMEM_H__)
+#include "umem.h"
+#endif
+#if !defined(__DEVICE_H__)
+#include "device.h"
+#endif
+#if !defined(__WMGR_H__)
+#include "wmgr.h"
+#endif
+
+
+/*---------------------  Static Definitions -------------------------*/
+static int          msglevel                =MSG_LEVEL_INFO;
+//static int          msglevel                =MSG_LEVEL_DEBUG;
+/*---------------------  Static Classes  ----------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+
+const BYTE abyOUIGK[4]      = { 0x00, 0x0F, 0xAC, 0x00 };
+const BYTE abyOUIWEP40[4]   = { 0x00, 0x0F, 0xAC, 0x01 };
+const BYTE abyOUIWEP104[4]  = { 0x00, 0x0F, 0xAC, 0x05 };
+const BYTE abyOUITKIP[4]    = { 0x00, 0x0F, 0xAC, 0x02 };
+const BYTE abyOUICCMP[4]    = { 0x00, 0x0F, 0xAC, 0x04 };
+
+const BYTE abyOUI8021X[4]   = { 0x00, 0x0F, 0xAC, 0x01 };
+const BYTE abyOUIPSK[4]     = { 0x00, 0x0F, 0xAC, 0x02 };
+
+
+/*---------------------  Static Functions  --------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+
+/*+
+ *
+ * Description:
+ *    Clear RSN information in BSSList.
+ *
+ * Parameters:
+ *  In:
+ *      pBSSNode - BSS list.
+ *  Out:
+ *      none
+ *
+ * Return Value: none.
+ *
+-*/
+VOID
+WPA2_ClearRSN (
+    IN PKnownBSS        pBSSNode
+    )
+{
+    int ii;
+
+    pBSSNode->bWPA2Valid = FALSE;
+
+    pBSSNode->byCSSGK = WLAN_11i_CSS_CCMP;
+    for (ii=0; ii < 4; ii ++)
+        pBSSNode->abyCSSPK[ii] = WLAN_11i_CSS_CCMP;
+    pBSSNode->wCSSPKCount = 1;
+    for (ii=0; ii < 4; ii ++)
+        pBSSNode->abyAKMSSAuthType[ii] = WLAN_11i_AKMSS_802_1X;
+    pBSSNode->wAKMSSAuthCount = 1;
+    pBSSNode->sRSNCapObj.bRSNCapExist = FALSE;
+    pBSSNode->sRSNCapObj.wRSNCap = 0;
+}
+
+/*+
+ *
+ * Description:
+ *    Parse RSN IE.
+ *
+ * Parameters:
+ *  In:
+ *      pBSSNode - BSS list.
+ *      pRSN - Pointer to the RSN IE.
+ *  Out:
+ *      none
+ *
+ * Return Value: none.
+ *
+-*/
+VOID
+WPA2vParseRSN (
+    IN PKnownBSS        pBSSNode,
+    IN PWLAN_IE_RSN     pRSN
+    )
+{
+    int                 i, j;
+    WORD                m = 0, n = 0;
+    PBYTE               pbyOUI;
+    BOOL                bUseGK = FALSE;
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"WPA2_ParseRSN: [%d]\n", pRSN->len);
+
+    WPA2_ClearRSN(pBSSNode);
+
+    if (pRSN->len == 2) { // ver(2)
+        if ((pRSN->byElementID == WLAN_EID_RSN) && (pRSN->wVersion == 1)) {
+            pBSSNode->bWPA2Valid = TRUE;
+        }
+        return;
+    }
+
+    if (pRSN->len < 6) { // ver(2) + GK(4)
+        // invalid CSS, P802.11i/D10.0, p31
+        return;
+    }
+
+    // information element header makes sense
+    if ((pRSN->byElementID == WLAN_EID_RSN) &&
+        (pRSN->wVersion == 1)) {
+
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Legal 802.11i RSN\n");
+
+        pbyOUI = &(pRSN->abyRSN[0]);
+        if (MEMEqualMemory(pbyOUI, abyOUIWEP40, 4))
+            pBSSNode->byCSSGK = WLAN_11i_CSS_WEP40;
+        else if (MEMEqualMemory(pbyOUI, abyOUITKIP, 4))
+            pBSSNode->byCSSGK = WLAN_11i_CSS_TKIP;
+        else if (MEMEqualMemory(pbyOUI, abyOUICCMP, 4))
+            pBSSNode->byCSSGK = WLAN_11i_CSS_CCMP;
+        else if (MEMEqualMemory(pbyOUI, abyOUIWEP104, 4))
+            pBSSNode->byCSSGK = WLAN_11i_CSS_WEP104;
+        else if (MEMEqualMemory(pbyOUI, abyOUIGK, 4)) {
+            // invalid CSS, P802.11i/D10.0, p32
+            return;
+        } else
+            // any vendor checks here
+            pBSSNode->byCSSGK = WLAN_11i_CSS_UNKNOWN;
+
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"802.11i CSS: %X\n", pBSSNode->byCSSGK);
+
+        if (pRSN->len == 6) {
+            pBSSNode->bWPA2Valid = TRUE;
+            return;
+        }
+
+        if (pRSN->len >= 8) { // ver(2) + GK(4) + PK count(2)
+            pBSSNode->wCSSPKCount = *((PWORD) &(pRSN->abyRSN[4]));
+            j = 0;
+            pbyOUI = &(pRSN->abyRSN[6]);
+
+            for (i = 0; (i < pBSSNode->wCSSPKCount) && (j < sizeof(pBSSNode->abyCSSPK)/sizeof(BYTE)); i++) {
+
+                if (pRSN->len >= 8+i*4+4) { // ver(2)+GK(4)+PKCnt(2)+PKS(4*i)
+                    if (MEMEqualMemory(pbyOUI, abyOUIGK, 4)) {
+                        pBSSNode->abyCSSPK[j++] = WLAN_11i_CSS_USE_GROUP;
+                        bUseGK = TRUE;
+                    } else if (MEMEqualMemory(pbyOUI, abyOUIWEP40, 4)) {
+                        // Invialid CSS, continue to parsing
+                    } else if (MEMEqualMemory(pbyOUI, abyOUITKIP, 4)) {
+                        if (pBSSNode->byCSSGK != WLAN_11i_CSS_CCMP)
+                            pBSSNode->abyCSSPK[j++] = WLAN_11i_CSS_TKIP;
+                        else
+                            ; // Invialid CSS, continue to parsing
+                    } else if (MEMEqualMemory(pbyOUI, abyOUICCMP, 4)) {
+                        pBSSNode->abyCSSPK[j++] = WLAN_11i_CSS_CCMP;
+                    } else if (MEMEqualMemory(pbyOUI, abyOUIWEP104, 4)) {
+                        // Invialid CSS, continue to parsing
+                    } else {
+                        // any vendor checks here
+                        pBSSNode->abyCSSPK[j++] = WLAN_11i_CSS_UNKNOWN;
+                    }
+                    pbyOUI += 4;
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"abyCSSPK[%d]: %X\n", j-1, pBSSNode->abyCSSPK[j-1]);
+                } else
+                    break;
+            } //for
+
+            if (bUseGK == TRUE) {
+                if (j != 1) {
+                    // invalid CSS, This should be only PK CSS.
+                    return;
+                }
+                if (pBSSNode->byCSSGK == WLAN_11i_CSS_CCMP) {
+                    // invalid CSS, If CCMP is enable , PK can't be CSSGK.
+                    return;
+                }
+            }
+            if ((pBSSNode->wCSSPKCount != 0) && (j == 0)) {
+                // invalid CSS, No valid PK.
+                return;
+            }
+            pBSSNode->wCSSPKCount = (WORD)j;
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"wCSSPKCount: %d\n", pBSSNode->wCSSPKCount);
+        }
+
+        m = *((PWORD) &(pRSN->abyRSN[4]));
+
+        if (pRSN->len >= 10+m*4) { // ver(2) + GK(4) + PK count(2) + PKS(4*m) + AKMSS count(2)
+            pBSSNode->wAKMSSAuthCount = *((PWORD) &(pRSN->abyRSN[6+4*m]));;
+            j = 0;
+            pbyOUI = &(pRSN->abyRSN[8+4*m]);
+            for (i = 0; (i < pBSSNode->wAKMSSAuthCount) && (j < sizeof(pBSSNode->abyAKMSSAuthType)/sizeof(BYTE)); i++) {
+                if (pRSN->len >= 10+(m+i)*4+4) { // ver(2)+GK(4)+PKCnt(2)+PKS(4*m)+AKMSS(2)+AKS(4*i)
+                    if (MEMEqualMemory(pbyOUI, abyOUI8021X, 4))
+                        pBSSNode->abyAKMSSAuthType[j++] = WLAN_11i_AKMSS_802_1X;
+                    else if (MEMEqualMemory(pbyOUI, abyOUIPSK, 4))
+                        pBSSNode->abyAKMSSAuthType[j++] = WLAN_11i_AKMSS_PSK;
+                    else
+                        // any vendor checks here
+                        pBSSNode->abyAKMSSAuthType[j++] = WLAN_11i_AKMSS_UNKNOWN;
+                    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"abyAKMSSAuthType[%d]: %X\n", j-1, pBSSNode->abyAKMSSAuthType[j-1]);
+                } else
+                    break;
+            }
+            pBSSNode->wAKMSSAuthCount = (WORD)j;
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO"wAKMSSAuthCount: %d\n", pBSSNode->wAKMSSAuthCount);
+
+            n = *((PWORD) &(pRSN->abyRSN[6+4*m]));;
+            if (pRSN->len >= 12+4*m+4*n) { // ver(2)+GK(4)+PKCnt(2)+PKS(4*m)+AKMSSCnt(2)+AKMSS(4*n)+Cap(2)
+                pBSSNode->sRSNCapObj.bRSNCapExist = TRUE;
+                pBSSNode->sRSNCapObj.wRSNCap = *((PWORD) &(pRSN->abyRSN[8+4*m+4*n]));
+            }
+        }
+        //ignore PMKID lists bcs only (Re)Assocrequest has this field
+        pBSSNode->bWPA2Valid = TRUE;
+    }
+}
+
+
+/*+
+ *
+ * Description:
+ *    Set WPA IEs
+ *
+ * Parameters:
+ *  In:
+ *      pMgmtHandle - Pointer to management object
+ *  Out:
+ *      pRSNIEs     - Pointer to the RSN IE to set.
+ *
+ * Return Value: length of IEs.
+ *
+-*/
+UINT
+WPA2uSetIEs(
+    IN PVOID pMgmtHandle,
+    OUT PWLAN_IE_RSN pRSNIEs
+    )
+{
+    PSMgmtObject    pMgmt = (PSMgmtObject) pMgmtHandle;
+    PBYTE           pbyBuffer = NULL;
+    UINT            ii = 0;
+    PWORD           pwPMKID = NULL;
+
+    if (pRSNIEs == NULL) {
+        return(0);
+    }
+    if (((pMgmt->eAuthenMode == WMAC_AUTH_WPA2) ||
+         (pMgmt->eAuthenMode == WMAC_AUTH_WPA2PSK)) &&
+        (pMgmt->pCurrBSS != NULL)) {
+        /* WPA2 IE */
+        pbyBuffer = (PBYTE) pRSNIEs;
+        pRSNIEs->byElementID = WLAN_EID_RSN;
+        pRSNIEs->len = 6; //Version(2)+GK(4)
+        pRSNIEs->wVersion = 1;
+        //Group Key Cipher Suite
+        pRSNIEs->abyRSN[0] = 0x00;
+        pRSNIEs->abyRSN[1] = 0x0F;
+        pRSNIEs->abyRSN[2] = 0xAC;
+        if (pMgmt->byCSSGK == KEY_CTL_WEP) {
+            pRSNIEs->abyRSN[3] = pMgmt->pCurrBSS->byCSSGK;
+        } else if (pMgmt->byCSSGK == KEY_CTL_TKIP) {
+            pRSNIEs->abyRSN[3] = WLAN_11i_CSS_TKIP;
+        } else if (pMgmt->byCSSGK == KEY_CTL_CCMP) {
+            pRSNIEs->abyRSN[3] = WLAN_11i_CSS_CCMP;
+        } else {
+            pRSNIEs->abyRSN[3] = WLAN_11i_CSS_UNKNOWN;
+        }
+
+        // Pairwise Key Cipher Suite
+        pRSNIEs->abyRSN[4] = 1;
+        pRSNIEs->abyRSN[5] = 0;
+        pRSNIEs->abyRSN[6] = 0x00;
+        pRSNIEs->abyRSN[7] = 0x0F;
+        pRSNIEs->abyRSN[8] = 0xAC;
+        if (pMgmt->byCSSPK == KEY_CTL_TKIP) {
+            pRSNIEs->abyRSN[9] = WLAN_11i_CSS_TKIP;
+        } else if (pMgmt->byCSSPK == KEY_CTL_CCMP) {
+            pRSNIEs->abyRSN[9] = WLAN_11i_CSS_CCMP;
+        } else if (pMgmt->byCSSPK == KEY_CTL_NONE) {
+            pRSNIEs->abyRSN[9] = WLAN_11i_CSS_USE_GROUP;
+        } else {
+            pRSNIEs->abyRSN[9] = WLAN_11i_CSS_UNKNOWN;
+        }
+        pRSNIEs->len += 6;
+
+        // Auth Key Management Suite
+        pRSNIEs->abyRSN[10] = 1;
+        pRSNIEs->abyRSN[11] = 0;
+        pRSNIEs->abyRSN[12] = 0x00;
+        pRSNIEs->abyRSN[13] = 0x0F;
+        pRSNIEs->abyRSN[14] = 0xAC;
+        if (pMgmt->eAuthenMode == WMAC_AUTH_WPA2PSK) {
+            pRSNIEs->abyRSN[15] = WLAN_11i_AKMSS_PSK;
+        } else if (pMgmt->eAuthenMode == WMAC_AUTH_WPA2) {
+            pRSNIEs->abyRSN[15] = WLAN_11i_AKMSS_802_1X;
+        } else {
+            pRSNIEs->abyRSN[15] = WLAN_11i_AKMSS_UNKNOWN;
+        }
+        pRSNIEs->len +=6;
+
+        // RSN Capabilites
+        if (pMgmt->pCurrBSS->sRSNCapObj.bRSNCapExist == TRUE) {
+            MEMvCopy(&pRSNIEs->abyRSN[16], &pMgmt->pCurrBSS->sRSNCapObj.wRSNCap, 2);
+        } else {
+            pRSNIEs->abyRSN[16] = 0;
+            pRSNIEs->abyRSN[17] = 0;
+        }
+        pRSNIEs->len +=2;
+
+        if ((pMgmt->gsPMKIDCache.BSSIDInfoCount > 0) &&
+            (pMgmt->bRoaming == TRUE) &&
+            (pMgmt->eAuthenMode == WMAC_AUTH_WPA2)) {
+            // RSN PMKID
+            pwPMKID = (PWORD)(&pRSNIEs->abyRSN[18]);  // Point to PMKID count
+            *pwPMKID = 0;                               // Initialize PMKID count
+            pbyBuffer = &pRSNIEs->abyRSN[20];           // Point to PMKID list
+            for (ii = 0; ii < pMgmt->gsPMKIDCache.BSSIDInfoCount; ii++) {
+                if (MEMEqualMemory(&pMgmt->gsPMKIDCache.BSSIDInfo[ii].abyBSSID[0], pMgmt->abyCurrBSSID, U_ETHER_ADDR_LEN)) {
+                    (*pwPMKID) ++;
+                    MEMvCopy(pbyBuffer, pMgmt->gsPMKIDCache.BSSIDInfo[ii].abyPMKID, 16);
+                    pbyBuffer += 16;
+                }
+            }
+            if (*pwPMKID != 0) {
+                pRSNIEs->len += (2 + (*pwPMKID)*16);
+            } else {
+                pbyBuffer = &pRSNIEs->abyRSN[18];
+            }
+        }
+        return(pRSNIEs->len + WLAN_IEHDR_LEN);
+    }
+    return(0);
+}
diff --git a/drivers/staging/vt6655/wpa2.h b/drivers/staging/vt6655/wpa2.h
new file mode 100644
index 00000000000..bda045b313b
--- /dev/null
+++ b/drivers/staging/vt6655/wpa2.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ * File: wpa2.h
+ *
+ * Purpose: Defines the macros, types, and functions for dealing
+ *          with WPA2 informations.
+ *
+ * Author: Yiching Chen
+ *
+ * Date: Oct. 4, 2004
+ *
+ */
+
+#ifndef __WPA2_H__
+#define __WPA2_H__
+
+
+#if !defined(__TTYPE_H__)
+#include "ttype.h"
+#endif
+#if !defined(__80211MGR_H__)
+#include "80211mgr.h"
+#endif
+#if !defined(__80211HDR_H__)
+#include "80211hdr.h"
+#endif
+#if !defined(__BSSDB_H__)
+#include "bssdb.h"
+#endif
+#if !defined(__VNTWIFI_H__)
+#include "vntwifi.h"
+#endif
+
+
+
+/*---------------------  Export Definitions -------------------------*/
+
+typedef struct tagsPMKIDInfo {
+    BYTE    abyBSSID[6];
+    BYTE    abyPMKID[16];
+} PMKIDInfo, *PPMKIDInfo;
+
+typedef struct tagSPMKIDCache {
+    ULONG       BSSIDInfoCount;
+    PMKIDInfo   BSSIDInfo[MAX_PMKID_CACHE];
+} SPMKIDCache, *PSPMKIDCache;
+
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Types  ------------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+#ifdef __cplusplus
+extern "C" {                            /* Assume C declarations for C++ */
+#endif /* __cplusplus */
+
+VOID
+WPA2_ClearRSN (
+    IN PKnownBSS        pBSSNode
+    );
+
+VOID
+WPA2vParseRSN (
+    IN PKnownBSS        pBSSNode,
+    IN PWLAN_IE_RSN     pRSN
+    );
+
+UINT
+WPA2uSetIEs(
+    IN PVOID pMgmtHandle,
+    OUT PWLAN_IE_RSN pRSNIEs
+    );
+
+
+#ifdef __cplusplus
+}                                       /* End of extern "C" { */
+#endif /* __cplusplus */
+
+
+#endif // __WPA2_H__
diff --git a/drivers/staging/vt6655/wpactl.c b/drivers/staging/vt6655/wpactl.c
new file mode 100644
index 00000000000..cc4f0adb963
--- /dev/null
+++ b/drivers/staging/vt6655/wpactl.c
@@ -0,0 +1,1017 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: wpactl.c
+ *
+ * Purpose: handle wpa supplicant ioctl input/out functions
+ *
+ * Author: Lyndon Chen
+ *
+ * Date: Oct. 20, 2003
+ *
+ * Functions:
+ *
+ * Revision History:
+ *
+ */
+
+
+#if !defined(__WPACTL_H__)
+#include "wpactl.h"
+#endif
+#if !defined(__KEY_H__)
+#include "key.h"
+#endif
+#if !defined(__MAC_H__)
+#include "mac.h"
+#endif
+#if !defined(__DEVICE_H__)
+#include "device.h"
+#endif
+#if !defined(__WMGR_H__)
+#include "wmgr.h"
+#endif
+#if !defined(__IOCMD_H__)
+#include "iocmd.h"
+#endif
+#if !defined(__IOWPA_H__)
+#include "iowpa.h"
+#endif
+//2008-0717-05, <Add> by James
+#if !defined(__RF_H__)
+#include "rf.h"
+#endif
+
+/*---------------------  Static Definitions -------------------------*/
+
+#define VIAWGET_WPA_MAX_BUF_SIZE 1024
+
+
+
+static const int frequency_list[] = {
+	2412, 2417, 2422, 2427, 2432, 2437, 2442,
+	2447, 2452, 2457, 2462, 2467, 2472, 2484
+};
+/*---------------------  Static Classes  ----------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+//static int          msglevel                =MSG_LEVEL_DEBUG;
+static int          msglevel                =MSG_LEVEL_INFO;
+
+/*---------------------  Static Functions  --------------------------*/
+
+
+
+
+/*---------------------  Export Variables  --------------------------*/
+
+
+static void wpadev_setup(struct net_device *dev)
+{
+	dev->type               = ARPHRD_IEEE80211;
+	dev->hard_header_len    = ETH_HLEN;
+	dev->mtu                = 2048;
+	dev->addr_len           = ETH_ALEN;
+	dev->tx_queue_len       = 1000;
+
+	memset(dev->broadcast,0xFF, ETH_ALEN);
+
+	dev->flags              = IFF_BROADCAST|IFF_MULTICAST;
+}
+
+
+
+/*
+ * Description:
+ *      register netdev for wpa supplicant deamon
+ *
+ * Parameters:
+ *  In:
+ *      pDevice             -
+ *      enable              -
+ *  Out:
+ *
+ * Return Value:
+ *
+ */
+
+static int wpa_init_wpadev(PSDevice pDevice)
+{
+    PSDevice wpadev_priv;
+	struct net_device *dev = pDevice->dev;
+         int ret=0;
+
+	pDevice->wpadev = alloc_netdev(sizeof(PSDevice), "vntwpa", wpadev_setup);
+	if (pDevice->wpadev == NULL)
+		return -ENOMEM;
+
+    wpadev_priv = netdev_priv(pDevice->wpadev);
+    *wpadev_priv = *pDevice;
+
+	memcpy(pDevice->wpadev->dev_addr, dev->dev_addr, U_ETHER_ADDR_LEN);
+         pDevice->wpadev->base_addr = dev->base_addr;
+	pDevice->wpadev->irq = dev->irq;
+	pDevice->wpadev->mem_start = dev->mem_start;
+	pDevice->wpadev->mem_end = dev->mem_end;
+	ret = register_netdev(pDevice->wpadev);
+	if (ret) {
+		DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: register_netdev(WPA) failed!\n",
+		       dev->name);
+		free_netdev(pDevice->wpadev);
+		return -1;
+	}
+
+	if (pDevice->skb == NULL) {
+        pDevice->skb = dev_alloc_skb((int)pDevice->rx_buf_sz);
+        if (pDevice->skb == NULL)
+		    return -ENOMEM;
+    }
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: Registered netdev %s for WPA management\n",
+	       dev->name, pDevice->wpadev->name);
+
+	return 0;
+}
+
+
+/*
+ * Description:
+ *      unregister net_device (wpadev)
+ *
+ * Parameters:
+ *  In:
+ *      pDevice             -
+ *  Out:
+ *
+ * Return Value:
+ *
+ */
+
+static int wpa_release_wpadev(PSDevice pDevice)
+{
+
+    if (pDevice->skb) {
+        dev_kfree_skb(pDevice->skb);
+        pDevice->skb = NULL;
+    }
+
+    if (pDevice->wpadev) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: Netdevice %s unregistered\n",
+	       pDevice->dev->name, pDevice->wpadev->name);
+	unregister_netdev(pDevice->wpadev);
+	free_netdev(pDevice->wpadev);
+         pDevice->wpadev = NULL;
+    }
+
+	return 0;
+}
+
+
+
+
+
+/*
+ * Description:
+ *      Set enable/disable dev for wpa supplicant deamon
+ *
+ * Parameters:
+ *  In:
+ *      pDevice             -
+ *      val                 -
+ *  Out:
+ *
+ * Return Value:
+ *
+ */
+
+int wpa_set_wpadev(PSDevice pDevice, int val)
+{
+
+
+	if (val)
+		return wpa_init_wpadev(pDevice);
+	else
+		return wpa_release_wpadev(pDevice);
+}
+
+
+/*
+ * Description:
+ *      Set WPA algorithm & keys
+ *
+ * Parameters:
+ *  In:
+ *      pDevice -
+ *      param -
+ *  Out:
+ *
+ * Return Value:
+ *
+ */
+
+int wpa_set_keys(PSDevice pDevice, void *ctx, BOOL  fcpfkernel)
+{
+ struct viawget_wpa_param *param=ctx;
+    PSMgmtObject pMgmt = pDevice->pMgmt;
+    DWORD   dwKeyIndex = 0;
+    BYTE    abyKey[MAX_KEY_LEN];
+    BYTE    abySeq[MAX_KEY_LEN];
+    QWORD   KeyRSC;
+//    NDIS_802_11_KEY_RSC KeyRSC;
+    BYTE    byKeyDecMode = KEY_CTL_WEP;
+	int ret = 0;
+	int uu, ii;
+
+
+	if (param->u.wpa_key.alg_name > WPA_ALG_CCMP)
+		return -EINVAL;
+
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "param->u.wpa_key.alg_name = %d \n", param->u.wpa_key.alg_name);
+	if (param->u.wpa_key.alg_name == WPA_ALG_NONE) {
+        pDevice->eEncryptionStatus = Ndis802_11EncryptionDisabled;
+        pDevice->bEncryptionEnable = FALSE;
+        pDevice->byKeyIndex = 0;
+        pDevice->bTransmitKey = FALSE;
+        KeyvRemoveAllWEPKey(&(pDevice->sKey), pDevice->PortOffset);
+        for (uu=0; uu<MAX_KEY_TABLE; uu++) {
+            MACvDisableKeyEntry(pDevice->PortOffset, uu);
+        }
+        return ret;
+    }
+
+    //spin_unlock_irq(&pDevice->lock);
+    if(param->u.wpa_key.key && fcpfkernel) {
+       memcpy(&abyKey[0], param->u.wpa_key.key, param->u.wpa_key.key_len);
+     }
+    else {
+	spin_unlock_irq(&pDevice->lock);
+	if (param->u.wpa_key.key &&
+	    copy_from_user(&abyKey[0], param->u.wpa_key.key, param->u.wpa_key.key_len)){
+	        spin_lock_irq(&pDevice->lock);
+	    return -EINVAL;
+    	}
+spin_lock_irq(&pDevice->lock);
+    	}
+
+    dwKeyIndex = (DWORD)(param->u.wpa_key.key_index);
+
+	if (param->u.wpa_key.alg_name == WPA_ALG_WEP) {
+        if (dwKeyIndex > 3) {
+            return -EINVAL;
+        }
+        else {
+            if (param->u.wpa_key.set_tx) {
+                pDevice->byKeyIndex = (BYTE)dwKeyIndex;
+                pDevice->bTransmitKey = TRUE;
+		        dwKeyIndex |= (1 << 31);
+            }
+            KeybSetDefaultKey(&(pDevice->sKey),
+                                dwKeyIndex & ~(BIT30 | USE_KEYRSC),
+                                param->u.wpa_key.key_len,
+                                NULL,
+                                abyKey,
+                                KEY_CTL_WEP,
+                                pDevice->PortOffset,
+                                pDevice->byLocalID);
+
+        }
+        pDevice->eEncryptionStatus = Ndis802_11Encryption1Enabled;
+        pDevice->bEncryptionEnable = TRUE;
+        return ret;
+	}
+
+	    //spin_unlock_irq(&pDevice->lock);
+        if(param->u.wpa_key.seq && fcpfkernel) {
+           memcpy(&abySeq[0], param->u.wpa_key.seq, param->u.wpa_key.seq_len);
+        	}
+       else {
+	   	spin_unlock_irq(&pDevice->lock);
+	if (param->u.wpa_key.seq &&
+	    copy_from_user(&abySeq[0], param->u.wpa_key.seq, param->u.wpa_key.seq_len)){
+
+	 spin_lock_irq(&pDevice->lock);
+	    return -EINVAL;
+       	}
+spin_lock_irq(&pDevice->lock);
+}
+
+	if (param->u.wpa_key.seq_len > 0) {
+		for (ii = 0 ; ii < param->u.wpa_key.seq_len ; ii++) {
+		     if (ii < 4)
+			    LODWORD(KeyRSC) |= (abySeq[ii] << (ii * 8));
+			 else
+			    HIDWORD(KeyRSC) |= (abySeq[ii] << ((ii-4) * 8));
+	         //KeyRSC |= (abySeq[ii] << (ii * 8));
+		}
+		dwKeyIndex |= 1 << 29;
+	}
+
+    if (param->u.wpa_key.key_index >= MAX_GROUP_KEY) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "return  dwKeyIndex > 3\n");
+        return -EINVAL;
+    }
+
+	if (param->u.wpa_key.alg_name == WPA_ALG_TKIP) {
+        pDevice->eEncryptionStatus = Ndis802_11Encryption2Enabled;
+    }
+
+	if (param->u.wpa_key.alg_name == WPA_ALG_CCMP) {
+        pDevice->eEncryptionStatus = Ndis802_11Encryption3Enabled;
+    }
+
+	if (param->u.wpa_key.set_tx)
+		dwKeyIndex |= (1 << 31);
+
+    if (pDevice->eEncryptionStatus == Ndis802_11Encryption3Enabled)
+        byKeyDecMode = KEY_CTL_CCMP;
+    else if (pDevice->eEncryptionStatus == Ndis802_11Encryption2Enabled)
+        byKeyDecMode = KEY_CTL_TKIP;
+    else
+        byKeyDecMode = KEY_CTL_WEP;
+
+    // Fix HCT test that set 256 bits KEY and Ndis802_11Encryption3Enabled
+    if (pDevice->eEncryptionStatus == Ndis802_11Encryption3Enabled) {
+        if (param->u.wpa_key.key_len == MAX_KEY_LEN)
+            byKeyDecMode = KEY_CTL_TKIP;
+        else if (param->u.wpa_key.key_len == WLAN_WEP40_KEYLEN)
+            byKeyDecMode = KEY_CTL_WEP;
+        else if (param->u.wpa_key.key_len == WLAN_WEP104_KEYLEN)
+            byKeyDecMode = KEY_CTL_WEP;
+    } else if (pDevice->eEncryptionStatus == Ndis802_11Encryption2Enabled) {
+        if (param->u.wpa_key.key_len == WLAN_WEP40_KEYLEN)
+            byKeyDecMode = KEY_CTL_WEP;
+        else if (param->u.wpa_key.key_len == WLAN_WEP104_KEYLEN)
+            byKeyDecMode = KEY_CTL_WEP;
+    }
+
+
+    // Check TKIP key length
+    if ((byKeyDecMode == KEY_CTL_TKIP) &&
+        (param->u.wpa_key.key_len != MAX_KEY_LEN)) {
+        // TKIP Key must be 256 bits
+        //DBG_PRN_WLAN03(("return NDIS_STATUS_INVALID_DATA - TKIP Key must be 256 bits\n"));
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "return- TKIP Key must be 256 bits!\n");
+        return -EINVAL;
+    }
+    // Check AES key length
+    if ((byKeyDecMode == KEY_CTL_CCMP) &&
+        (param->u.wpa_key.key_len != AES_KEY_LEN)) {
+        // AES Key must be 128 bits
+        //DBG_PRN_WLAN03(("return NDIS_STATUS_INVALID_DATA - AES Key must be 128 bits\n"));
+        return -EINVAL;
+    }
+
+   // spin_lock_irq(&pDevice->lock);
+    if (IS_BROADCAST_ADDRESS(&param->addr[0]) || (param->addr == NULL)) {
+        // If IS_BROADCAST_ADDRESS, set the key as every key entry's group key.
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Groupe Key Assign.\n");
+
+        if ((KeybSetAllGroupKey(&(pDevice->sKey),
+                            dwKeyIndex,
+                            param->u.wpa_key.key_len,
+                            (PQWORD) &(KeyRSC),
+                            (PBYTE)abyKey,
+                            byKeyDecMode,
+                            pDevice->PortOffset,
+                            pDevice->byLocalID) == TRUE) &&
+            (KeybSetDefaultKey(&(pDevice->sKey),
+                            dwKeyIndex,
+                            param->u.wpa_key.key_len,
+                            (PQWORD) &(KeyRSC),
+                            (PBYTE)abyKey,
+                            byKeyDecMode,
+                            pDevice->PortOffset,
+                            pDevice->byLocalID) == TRUE) ) {
+             DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "GROUP Key Assign.\n");
+
+        } else {
+            //DBG_PRN_WLAN03(("return NDIS_STATUS_INVALID_DATA -KeybSetDefaultKey Fail.0\n"));
+           // spin_unlock_irq(&pDevice->lock);
+            return -EINVAL;
+        }
+
+    } else {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Pairwise Key Assign.\n");
+        // BSSID not 0xffffffffffff
+        // Pairwise Key can't be WEP
+        if (byKeyDecMode == KEY_CTL_WEP) {
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Pairwise Key can't be WEP\n");
+            //spin_unlock_irq(&pDevice->lock);
+            return -EINVAL;
+        }
+
+        dwKeyIndex |= (1 << 30); // set pairwise key
+        if (pMgmt->eConfigMode == WMAC_CONFIG_IBSS_STA) {
+            //DBG_PRN_WLAN03(("return NDIS_STATUS_INVALID_DATA - WMAC_CONFIG_IBSS_STA\n"));
+            //spin_unlock_irq(&pDevice->lock);
+            return -EINVAL;
+        }
+        if (KeybSetKey(&(pDevice->sKey),
+                       &param->addr[0],
+                       dwKeyIndex,
+                       param->u.wpa_key.key_len,
+                       (PQWORD) &(KeyRSC),
+                       (PBYTE)abyKey,
+                        byKeyDecMode,
+                        pDevice->PortOffset,
+                        pDevice->byLocalID) == TRUE) {
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Pairwise Key Set\n");
+
+        } else {
+            // Key Table Full
+            if (IS_ETH_ADDRESS_EQUAL(&param->addr[0], pDevice->abyBSSID)) {
+                //DBG_PRN_WLAN03(("return NDIS_STATUS_INVALID_DATA -Key Table Full.2\n"));
+                //spin_unlock_irq(&pDevice->lock);
+                return -EINVAL;
+
+            } else {
+                // Save Key and configure just before associate/reassociate to BSSID
+                // we do not implement now
+                //spin_unlock_irq(&pDevice->lock);
+                return -EINVAL;
+            }
+        }
+    } // BSSID not 0xffffffffffff
+    if ((ret == 0) && ((param->u.wpa_key.set_tx) != 0)) {
+        pDevice->byKeyIndex = (BYTE)param->u.wpa_key.key_index;
+        pDevice->bTransmitKey = TRUE;
+    }
+    pDevice->bEncryptionEnable = TRUE;
+    //spin_unlock_irq(&pDevice->lock);
+
+/*
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " key=%x-%x-%x-%x-%x-xxxxx \n",
+               pMgmt->sNodeDBTable[iNodeIndex].abyWepKey[byKeyIndex][0],
+               pMgmt->sNodeDBTable[iNodeIndex].abyWepKey[byKeyIndex][1],
+               pMgmt->sNodeDBTable[iNodeIndex].abyWepKey[byKeyIndex][2],
+               pMgmt->sNodeDBTable[iNodeIndex].abyWepKey[byKeyIndex][3],
+               pMgmt->sNodeDBTable[iNodeIndex].abyWepKey[byKeyIndex][4]
+              );
+*/
+
+	return ret;
+
+}
+
+
+/*
+ * Description:
+ *      enable wpa auth & mode
+ *
+ * Parameters:
+ *  In:
+ *      pDevice   -
+ *      param     -
+ *  Out:
+ *
+ * Return Value:
+ *
+ */
+
+static int wpa_set_wpa(PSDevice pDevice,
+				     struct viawget_wpa_param *param)
+{
+
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+	int ret = 0;
+
+    pMgmt->eAuthenMode = WMAC_AUTH_OPEN;
+    pMgmt->bShareKeyAlgorithm = FALSE;
+
+    return ret;
+}
+
+
+
+
+ /*
+ * Description:
+ *      set disassociate
+ *
+ * Parameters:
+ *  In:
+ *      pDevice   -
+ *      param     -
+ *  Out:
+ *
+ * Return Value:
+ *
+ */
+
+static int wpa_set_disassociate(PSDevice pDevice,
+				     struct viawget_wpa_param *param)
+{
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+	int ret = 0;
+
+    spin_lock_irq(&pDevice->lock);
+    if (pDevice->bLinkPass) {
+        if (!memcmp(param->addr, pMgmt->abyCurrBSSID, 6))
+            bScheduleCommand((HANDLE)pDevice, WLAN_CMD_DISASSOCIATE, NULL);
+    }
+    spin_unlock_irq(&pDevice->lock);
+
+    return ret;
+}
+
+
+
+/*
+ * Description:
+ *      enable scan process
+ *
+ * Parameters:
+ *  In:
+ *      pDevice   -
+ *      param     -
+ *  Out:
+ *
+ * Return Value:
+ *
+ */
+
+static int wpa_set_scan(PSDevice pDevice,
+				     struct viawget_wpa_param *param)
+{
+	int ret = 0;
+
+    spin_lock_irq(&pDevice->lock);
+    BSSvClearBSSList((HANDLE)pDevice, pDevice->bLinkPass);
+    bScheduleCommand((HANDLE) pDevice, WLAN_CMD_BSSID_SCAN, NULL);
+    spin_unlock_irq(&pDevice->lock);
+
+    return ret;
+}
+
+
+
+/*
+ * Description:
+ *      get bssid
+ *
+ * Parameters:
+ *  In:
+ *      pDevice   -
+ *      param     -
+ *  Out:
+ *
+ * Return Value:
+ *
+ */
+
+static int wpa_get_bssid(PSDevice pDevice,
+				     struct viawget_wpa_param *param)
+{
+    PSMgmtObject        pMgmt = pDevice->pMgmt;
+	int ret = 0;
+
+	memcpy(param->u.wpa_associate.bssid, pMgmt->abyCurrBSSID , 6);
+
+    return ret;
+
+}
+
+
+/*
+ * Description:
+ *      get bssid
+ *
+ * Parameters:
+ *  In:
+ *      pDevice   -
+ *      param     -
+ *  Out:
+ *
+ * Return Value:
+ *
+ */
+
+static int wpa_get_ssid(PSDevice pDevice,
+				     struct viawget_wpa_param *param)
+{
+    PSMgmtObject        pMgmt = pDevice->pMgmt;
+	PWLAN_IE_SSID       pItemSSID;
+	int ret = 0;
+
+    pItemSSID = (PWLAN_IE_SSID)pMgmt->abyCurrSSID;
+
+	memcpy(param->u.wpa_associate.ssid, pItemSSID->abySSID , pItemSSID->len);
+	param->u.wpa_associate.ssid_len = pItemSSID->len;
+
+    return ret;
+}
+
+
+
+/*
+ * Description:
+ *      get scan results
+ *
+ * Parameters:
+ *  In:
+ *      pDevice   -
+ *      param     -
+ *  Out:
+ *
+ * Return Value:
+ *
+ */
+
+static int wpa_get_scan(PSDevice pDevice,
+				     struct viawget_wpa_param *param)
+{
+	struct viawget_scan_result *scan_buf;
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+    PWLAN_IE_SSID   pItemSSID;
+    PKnownBSS pBSS;
+	PBYTE  pBuf;
+	int ret = 0;
+	u16 count = 0;
+	u16 ii, jj;
+#if 1
+
+    PBYTE ptempBSS;
+
+
+
+    ptempBSS = kmalloc(sizeof(KnownBSS), (int)GFP_ATOMIC);
+
+    if (ptempBSS == NULL) {
+
+       printk("bubble sort kmalloc memory fail@@@\n");
+
+        ret = -ENOMEM;
+
+        return ret;
+
+    }
+
+    for (ii = 0; ii < MAX_BSS_NUM; ii++) {
+
+         for(jj=0;jj<MAX_BSS_NUM-ii-1;jj++) {
+
+           if((pMgmt->sBSSList[jj].bActive!=TRUE) ||
+
+                ((pMgmt->sBSSList[jj].uRSSI>pMgmt->sBSSList[jj+1].uRSSI) &&(pMgmt->sBSSList[jj+1].bActive!=FALSE))) {
+
+                 memcpy(ptempBSS,&pMgmt->sBSSList[jj],sizeof(KnownBSS));
+
+                 memcpy(&pMgmt->sBSSList[jj],&pMgmt->sBSSList[jj+1],sizeof(KnownBSS));
+
+                 memcpy(&pMgmt->sBSSList[jj+1],ptempBSS,sizeof(KnownBSS));
+
+              }
+
+         }
+
+    };
+
+  kfree(ptempBSS);
+
+ // printk("bubble sort result:\n");
+
+  //for (ii = 0; ii < MAX_BSS_NUM; ii++)
+
+  //    printk("%d [%s]:RSSI=%d\n",ii,((PWLAN_IE_SSID)(pMgmt->sBSSList[ii].abySSID))->abySSID,
+
+  //                                                                 pMgmt->sBSSList[ii].uRSSI);
+
+ #endif
+
+//******mike:bubble sort by stronger RSSI*****//
+
+
+
+
+	count = 0;
+	pBSS = &(pMgmt->sBSSList[0]);
+    for (ii = 0; ii < MAX_BSS_NUM; ii++) {
+        pBSS = &(pMgmt->sBSSList[ii]);
+        if (!pBSS->bActive)
+            continue;
+        count++;
+    };
+
+    pBuf = kmalloc(sizeof(struct viawget_scan_result) * count, (int)GFP_ATOMIC);
+
+    if (pBuf == NULL) {
+        ret = -ENOMEM;
+        return ret;
+    }
+   	memset(pBuf, 0, sizeof(struct viawget_scan_result) * count);
+    scan_buf = (struct viawget_scan_result *)pBuf;
+	pBSS = &(pMgmt->sBSSList[0]);
+    for (ii = 0, jj = 0; ii < MAX_BSS_NUM ; ii++) {
+        pBSS = &(pMgmt->sBSSList[ii]);
+        if (pBSS->bActive) {
+            if (jj >= count)
+                break;
+            memcpy(scan_buf->bssid, pBSS->abyBSSID, WLAN_BSSID_LEN);
+            pItemSSID = (PWLAN_IE_SSID)pBSS->abySSID;
+   		    memcpy(scan_buf->ssid, pItemSSID->abySSID, pItemSSID->len);
+   		    scan_buf->ssid_len = pItemSSID->len;
+            scan_buf->freq = frequency_list[pBSS->uChannel-1];
+	  scan_buf->caps = pBSS->wCapInfo;
+            //scan_buf->caps = pBSS->wCapInfo;
+            //scan_buf->qual =
+            //scan_buf->noise =
+            //scan_buf->level =
+            //scan_buf->maxrate =
+            if (pBSS->wWPALen != 0) {
+                scan_buf->wpa_ie_len = pBSS->wWPALen;
+                memcpy(scan_buf->wpa_ie, pBSS->byWPAIE, pBSS->wWPALen);
+            }
+            if (pBSS->wRSNLen != 0) {
+                scan_buf->rsn_ie_len = pBSS->wRSNLen;
+                memcpy(scan_buf->rsn_ie, pBSS->byRSNIE, pBSS->wRSNLen);
+            }
+            scan_buf = (struct viawget_scan_result *)((PBYTE)scan_buf + sizeof(struct viawget_scan_result));
+            jj ++;
+        }
+    }
+
+    if (jj < count)
+        count = jj;
+
+    if (copy_to_user(param->u.scan_results.buf, pBuf, sizeof(struct viawget_scan_result) * count)) {
+		ret = -EFAULT;
+	};
+	param->u.scan_results.scan_count = count;
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO " param->u.scan_results.scan_count = %d\n", count)
+
+    kfree(pBuf);
+    return ret;
+}
+
+
+
+/*
+ * Description:
+ *      set associate with AP
+ *
+ * Parameters:
+ *  In:
+ *      pDevice   -
+ *      param     -
+ *  Out:
+ *
+ * Return Value:
+ *
+ */
+
+static int wpa_set_associate(PSDevice pDevice,
+				     struct viawget_wpa_param *param)
+{
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+    PWLAN_IE_SSID   pItemSSID;
+    BYTE    abyNullAddr[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+    BYTE    abyWPAIE[64];
+    int ret = 0;
+    BOOL bWepEnabled=FALSE;
+
+	// set key type & algorithm
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "pairwise_suite = %d\n", param->u.wpa_associate.pairwise_suite);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "group_suite = %d\n", param->u.wpa_associate.group_suite);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "key_mgmt_suite = %d\n", param->u.wpa_associate.key_mgmt_suite);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "auth_alg = %d\n", param->u.wpa_associate.auth_alg);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "mode = %d\n", param->u.wpa_associate.mode);
+    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "wpa_ie_len = %d\n", param->u.wpa_associate.wpa_ie_len);
+
+
+	if (param->u.wpa_associate.wpa_ie &&
+	    copy_from_user(&abyWPAIE[0], param->u.wpa_associate.wpa_ie, param->u.wpa_associate.wpa_ie_len))
+	    return -EINVAL;
+
+	if (param->u.wpa_associate.mode == 1)
+	    pMgmt->eConfigMode = WMAC_CONFIG_IBSS_STA;
+	else
+	    pMgmt->eConfigMode = WMAC_CONFIG_ESS_STA;
+    // set ssid
+	memset(pMgmt->abyDesireSSID, 0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
+    pItemSSID = (PWLAN_IE_SSID)pMgmt->abyDesireSSID;
+    pItemSSID->byElementID = WLAN_EID_SSID;
+	pItemSSID->len = param->u.wpa_associate.ssid_len;
+	memcpy(pItemSSID->abySSID, param->u.wpa_associate.ssid, pItemSSID->len);
+	// set bssid
+    if (memcmp(param->u.wpa_associate.bssid, &abyNullAddr[0], 6) != 0)
+        memcpy(pMgmt->abyDesireBSSID, param->u.wpa_associate.bssid, 6);
+else
+{
+   bScheduleCommand((HANDLE) pDevice, WLAN_CMD_BSSID_SCAN, pItemSSID->abySSID);
+}
+
+    if (param->u.wpa_associate.wpa_ie_len == 0) {
+	    if (param->u.wpa_associate.auth_alg & AUTH_ALG_SHARED_KEY)
+            pMgmt->eAuthenMode = WMAC_AUTH_SHAREKEY;
+	    else
+            pMgmt->eAuthenMode = WMAC_AUTH_OPEN;
+	} else if (abyWPAIE[0] == RSN_INFO_ELEM) {
+		if (param->u.wpa_associate.key_mgmt_suite == KEY_MGMT_PSK)
+			pMgmt->eAuthenMode = WMAC_AUTH_WPA2PSK;
+		else
+			pMgmt->eAuthenMode = WMAC_AUTH_WPA2;
+	} else {
+		if (param->u.wpa_associate.key_mgmt_suite == KEY_MGMT_WPA_NONE)
+			pMgmt->eAuthenMode = WMAC_AUTH_WPANONE;
+		else if (param->u.wpa_associate.key_mgmt_suite == KEY_MGMT_PSK)
+		    pMgmt->eAuthenMode = WMAC_AUTH_WPAPSK;
+		else
+		    pMgmt->eAuthenMode = WMAC_AUTH_WPA;
+	}
+
+	switch (param->u.wpa_associate.pairwise_suite) {
+	case CIPHER_CCMP:
+		pDevice->eEncryptionStatus = Ndis802_11Encryption3Enabled;
+		break;
+	case CIPHER_TKIP:
+		pDevice->eEncryptionStatus = Ndis802_11Encryption2Enabled;
+		break;
+	case CIPHER_WEP40:
+	case CIPHER_WEP104:
+		pDevice->eEncryptionStatus = Ndis802_11Encryption1Enabled;
+		bWepEnabled=TRUE;
+		break;
+	case CIPHER_NONE:
+		if (param->u.wpa_associate.group_suite == CIPHER_CCMP)
+			pDevice->eEncryptionStatus = Ndis802_11Encryption3Enabled;
+		else
+			pDevice->eEncryptionStatus = Ndis802_11Encryption2Enabled;
+		break;
+	default:
+		pDevice->eEncryptionStatus = Ndis802_11EncryptionDisabled;
+	};
+
+//DavidWang add for WPA_supplicant support open/share mode
+
+      if (pMgmt->eAuthenMode == WMAC_AUTH_SHAREKEY) {
+            pDevice->eEncryptionStatus = Ndis802_11Encryption1Enabled;
+            //pMgmt->eAuthenMode = WMAC_AUTH_SHAREKEY;
+            pMgmt->bShareKeyAlgorithm = TRUE;
+             }
+     else if (pMgmt->eAuthenMode == WMAC_AUTH_OPEN) {
+          if(!bWepEnabled)  pDevice->eEncryptionStatus = Ndis802_11EncryptionDisabled;
+	else pDevice->eEncryptionStatus = Ndis802_11Encryption1Enabled;
+            //pMgmt->eAuthenMode = WMAC_AUTH_OPEN;
+            //pMgmt->bShareKeyAlgorithm = FALSE; //20080717-06,<Modify> by chester//Fix Open mode, WEP encrytion
+           }
+//mike save old encryption status
+	pDevice->eOldEncryptionStatus = pDevice->eEncryptionStatus;
+
+    if (pDevice->eEncryptionStatus !=  Ndis802_11EncryptionDisabled)
+        pDevice->bEncryptionEnable = TRUE;
+    else
+        pDevice->bEncryptionEnable = FALSE;
+if (!((pMgmt->eAuthenMode == WMAC_AUTH_SHAREKEY) ||
+      ((pMgmt->eAuthenMode == WMAC_AUTH_OPEN) && (bWepEnabled==TRUE))) )  //DavidWang  //20080717-06,<Modify> by chester//Not to initial WEP
+    KeyvInitTable(&pDevice->sKey, pDevice->PortOffset);
+    spin_lock_irq(&pDevice->lock);
+    pDevice->bLinkPass = FALSE;
+    memset(pMgmt->abyCurrBSSID, 0, 6);
+    pMgmt->eCurrState = WMAC_STATE_IDLE;
+    netif_stop_queue(pDevice->dev);
+	//20080701-02,<Add> by Mike Liu
+/*******search if ap_scan=2 ,which is associating request in hidden ssid mode ****/
+{
+   PKnownBSS       pCurr = NULL;
+    pCurr = BSSpSearchBSSList(pDevice,
+                              pMgmt->abyDesireBSSID,
+                              pMgmt->abyDesireSSID,
+                              pMgmt->eConfigPHYMode
+                              );
+
+    if (pCurr == NULL){
+    printk("wpa_set_associate---->hidden mode site survey before associate.......\n");
+    bScheduleCommand((HANDLE) pDevice, WLAN_CMD_BSSID_SCAN, pMgmt->abyDesireSSID);
+  };
+}
+/****************************************************************/
+    bScheduleCommand((HANDLE) pDevice, WLAN_CMD_SSID, NULL);
+    spin_unlock_irq(&pDevice->lock);
+
+    return ret;
+}
+
+
+/*
+ * Description:
+ *      wpa_ioctl main function supported for wpa supplicant
+ *
+ * Parameters:
+ *  In:
+ *      pDevice   -
+ *      iw_point  -
+ *  Out:
+ *
+ * Return Value:
+ *
+ */
+
+int wpa_ioctl(PSDevice pDevice, struct iw_point *p)
+{
+	struct viawget_wpa_param *param;
+	int ret = 0;
+	int wpa_ioctl = 0;
+
+	if (p->length < sizeof(struct viawget_wpa_param) ||
+	    p->length > VIAWGET_WPA_MAX_BUF_SIZE || !p->pointer)
+		return -EINVAL;
+
+	param = (struct viawget_wpa_param *) kmalloc((int)p->length, (int)GFP_KERNEL);
+	if (param == NULL)
+		return -ENOMEM;
+
+	if (copy_from_user(param, p->pointer, p->length)) {
+		ret = -EFAULT;
+		goto out;
+	}
+
+	switch (param->cmd) {
+	case VIAWGET_SET_WPA:
+        ret = wpa_set_wpa(pDevice, param);
+	    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_SET_WPA \n");
+		break;
+
+	case VIAWGET_SET_KEY:
+	    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_SET_KEY \n");
+	    spin_lock_irq(&pDevice->lock);
+        ret = wpa_set_keys(pDevice, param, FALSE);
+        spin_unlock_irq(&pDevice->lock);
+		break;
+
+	case VIAWGET_SET_SCAN:
+	    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_SET_SCAN \n");
+        ret = wpa_set_scan(pDevice, param);
+		break;
+
+	case VIAWGET_GET_SCAN:
+	    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_GET_SCAN\n");
+        ret = wpa_get_scan(pDevice, param);
+		wpa_ioctl = 1;
+		break;
+
+	case VIAWGET_GET_SSID:
+	    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_GET_SSID \n");
+        ret = wpa_get_ssid(pDevice, param);
+		wpa_ioctl = 1;
+		break;
+
+	case VIAWGET_GET_BSSID:
+	    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_GET_BSSID \n");
+        ret = wpa_get_bssid(pDevice, param);
+		wpa_ioctl = 1;
+		break;
+
+	case VIAWGET_SET_ASSOCIATE:
+	    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_SET_ASSOCIATE \n");
+        ret = wpa_set_associate(pDevice, param);
+		break;
+
+	case VIAWGET_SET_DISASSOCIATE:
+	    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_SET_DISASSOCIATE \n");
+        ret = wpa_set_disassociate(pDevice, param);
+		break;
+
+	case VIAWGET_SET_DROP_UNENCRYPT:
+	    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_SET_DROP_UNENCRYPT \n");
+		break;
+
+    case VIAWGET_SET_DEAUTHENTICATE:
+	    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_SET_DEAUTHENTICATE \n");
+		break;
+
+	default:
+	    DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "wpa_ioctl: unknown cmd=%d\n",
+		       param->cmd);
+		return -EOPNOTSUPP;
+		break;
+	}
+
+	if ((ret == 0) && wpa_ioctl) {
+		if (copy_to_user(p->pointer, param, p->length)) {
+			ret = -EFAULT;
+			goto out;
+		}
+	}
+
+out:
+	if (param != NULL)
+		kfree(param);
+
+	return ret;
+}
+
diff --git a/drivers/staging/vt6655/wpactl.h b/drivers/staging/vt6655/wpactl.h
new file mode 100644
index 00000000000..9e788978530
--- /dev/null
+++ b/drivers/staging/vt6655/wpactl.h
@@ -0,0 +1,89 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: wpactl.h
+ *
+ * Purpose:
+ *
+ * Author: Lyndon Chen
+ *
+ * Date: March 1, 2005
+ *
+ */
+
+
+#ifndef __WPACTL_H__
+#define __WPACTL_H__
+
+#if !defined(__DEVICE_H__)
+#include "device.h"
+#endif
+#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
+#if !defined(__IOWPA_H__)
+#include "iowpa.h"
+#endif
+#endif
+
+/*---------------------  Export Definitions -------------------------*/
+
+
+//WPA related
+
+typedef enum { WPA_ALG_NONE, WPA_ALG_WEP, WPA_ALG_TKIP, WPA_ALG_CCMP } wpa_alg;
+typedef enum { CIPHER_NONE, CIPHER_WEP40, CIPHER_TKIP, CIPHER_CCMP,
+	       CIPHER_WEP104 } wpa_cipher;
+typedef enum { KEY_MGMT_802_1X, KEY_MGMT_CCKM,KEY_MGMT_PSK, KEY_MGMT_NONE,
+	       KEY_MGMT_802_1X_NO_WPA, KEY_MGMT_WPA_NONE } wpa_key_mgmt;
+
+#define AUTH_ALG_OPEN_SYSTEM	0x01
+#define AUTH_ALG_SHARED_KEY	0x02
+#define AUTH_ALG_LEAP		0x04
+
+#define GENERIC_INFO_ELEM 0xdd
+#define RSN_INFO_ELEM 0x30
+
+
+
+typedef ULONGLONG   NDIS_802_11_KEY_RSC;
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+
+
+#ifdef __cplusplus
+extern "C" {                            /* Assume C declarations for C++ */
+#endif /* __cplusplus */
+
+int wpa_set_wpadev(PSDevice pDevice, int val);
+int wpa_ioctl(PSDevice pDevice, struct iw_point *p);
+int wpa_set_keys(PSDevice pDevice, void *ctx, BOOL  fcpfkernel);
+
+#ifdef __cplusplus
+}                                       /* End of extern "C" { */
+#endif /* __cplusplus */
+
+
+
+
+#endif // __WPACL_H__
+
+
+
diff --git a/drivers/staging/vt6655/wroute.c b/drivers/staging/vt6655/wroute.c
new file mode 100644
index 00000000000..219ae21654e
--- /dev/null
+++ b/drivers/staging/vt6655/wroute.c
@@ -0,0 +1,211 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: wroute.c
+ *
+ * Purpose: handle WMAC frame relay & filterring
+ *
+ * Author: Lyndon Chen
+ *
+ * Date: May 20, 2003
+ *
+ * Functions:
+ *      ROUTEbRelay - Relay packet
+ *
+ * Revision History:
+ *
+ */
+
+
+#if !defined(__MAC_H__)
+#include "mac.h"
+#endif
+#if !defined(__TCRC_H__)
+#include "tcrc.h"
+#endif
+#if !defined(__RXTX_H__)
+#include "rxtx.h"
+#endif
+#if !defined(__WROUTE_H__)
+#include "wroute.h"
+#endif
+#if !defined(__CARD_H__)
+#include "card.h"
+#endif
+#if !defined(__BASEBAND_H__)
+#include "baseband.h"
+#endif
+/*---------------------  Static Definitions -------------------------*/
+
+/*---------------------  Static Classes  ----------------------------*/
+
+/*---------------------  Static Variables  --------------------------*/
+static int          msglevel                =MSG_LEVEL_INFO;
+//static int          msglevel                =MSG_LEVEL_DEBUG;
+/*---------------------  Static Functions  --------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+
+
+/*
+ * Description:
+ *      Relay packet.  Return TRUE if packet is copy to DMA1
+ *
+ * Parameters:
+ *  In:
+ *      pDevice             -
+ *      pbySkbData          - rx packet skb data
+ *  Out:
+ *      TURE, FALSE
+ *
+ * Return Value: TRUE if packet duplicate; otherwise FALSE
+ *
+ */
+BOOL ROUTEbRelay (PSDevice pDevice, PBYTE pbySkbData, UINT uDataLen, UINT uNodeIndex)
+{
+    PSMgmtObject    pMgmt = pDevice->pMgmt;
+    PSTxDesc        pHeadTD, pLastTD;
+    UINT            cbFrameBodySize;
+    UINT            uMACfragNum;
+    BYTE            byPktTyp;
+    BOOL            bNeedEncryption = FALSE;
+    SKeyItem        STempKey;
+    PSKeyItem       pTransmitKey = NULL;
+    UINT            cbHeaderSize;
+    UINT            ii;
+    PBYTE           pbyBSSID;
+
+
+
+
+    if (AVAIL_TD(pDevice, TYPE_AC0DMA)<=0) {
+        DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Relay can't allocate TD1..\n");
+        return FALSE;
+    }
+
+    pHeadTD = pDevice->apCurrTD[TYPE_AC0DMA];
+
+    pHeadTD->m_td1TD1.byTCR = (TCR_EDP|TCR_STP);
+
+    memcpy(pDevice->sTxEthHeader.abyDstAddr, (PBYTE)pbySkbData, U_HEADER_LEN);
+
+    cbFrameBodySize = uDataLen - U_HEADER_LEN;
+
+    if (ntohs(pDevice->sTxEthHeader.wType) > MAX_DATA_LEN) {
+        cbFrameBodySize += 8;
+    }
+
+    if (pDevice->bEncryptionEnable == TRUE) {
+        bNeedEncryption = TRUE;
+
+        // get group key
+        pbyBSSID = pDevice->abyBroadcastAddr;
+        if(KeybGetTransmitKey(&(pDevice->sKey), pbyBSSID, GROUP_KEY, &pTransmitKey) == FALSE) {
+            pTransmitKey = NULL;
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_DEBUG"KEY is NULL. [%d]\n", pDevice->pMgmt->eCurrMode);
+        } else {
+            DEVICE_PRT(MSG_LEVEL_DEBUG, KERN_DEBUG"Get GTK.\n");
+        }
+    }
+
+    if (pDevice->bEnableHostWEP) {
+        if (uNodeIndex >= 0) {
+            pTransmitKey = &STempKey;
+            pTransmitKey->byCipherSuite = pMgmt->sNodeDBTable[uNodeIndex].byCipherSuite;
+            pTransmitKey->dwKeyIndex = pMgmt->sNodeDBTable[uNodeIndex].dwKeyIndex;
+            pTransmitKey->uKeyLength = pMgmt->sNodeDBTable[uNodeIndex].uWepKeyLength;
+            pTransmitKey->dwTSC47_16 = pMgmt->sNodeDBTable[uNodeIndex].dwTSC47_16;
+            pTransmitKey->wTSC15_0 = pMgmt->sNodeDBTable[uNodeIndex].wTSC15_0;
+            memcpy(pTransmitKey->abyKey,
+                &pMgmt->sNodeDBTable[uNodeIndex].abyWepKey[0],
+                pTransmitKey->uKeyLength
+                );
+        }
+    }
+
+    uMACfragNum = cbGetFragCount(pDevice, pTransmitKey, cbFrameBodySize, &pDevice->sTxEthHeader);
+
+    if (uMACfragNum > AVAIL_TD(pDevice,TYPE_AC0DMA)) {
+        return FALSE;
+    }
+    byPktTyp = (BYTE)pDevice->byPacketType;
+
+    if (pDevice->bFixRate) {
+        if (pDevice->eCurrentPHYType == PHY_TYPE_11B) {
+            if (pDevice->uConnectionRate >= RATE_11M) {
+                pDevice->wCurrentRate = RATE_11M;
+            } else {
+                pDevice->wCurrentRate = (WORD)pDevice->uConnectionRate;
+            }
+        } else {
+            if ((pDevice->eCurrentPHYType == PHY_TYPE_11A) &&
+                (pDevice->uConnectionRate <= RATE_6M)) {
+                pDevice->wCurrentRate = RATE_6M;
+            } else {
+                if (pDevice->uConnectionRate >= RATE_54M)
+                    pDevice->wCurrentRate = RATE_54M;
+                else
+                    pDevice->wCurrentRate = (WORD)pDevice->uConnectionRate;
+            }
+        }
+    }
+    else {
+        pDevice->wCurrentRate = pDevice->pMgmt->sNodeDBTable[uNodeIndex].wTxDataRate;
+    }
+
+    if (pDevice->wCurrentRate <= RATE_11M)
+        byPktTyp = PK_TYPE_11B;
+
+    vGenerateFIFOHeader(pDevice, byPktTyp, pDevice->pbyTmpBuff, bNeedEncryption,
+                        cbFrameBodySize, TYPE_AC0DMA, pHeadTD,
+                        &pDevice->sTxEthHeader, pbySkbData, pTransmitKey, uNodeIndex,
+                        &uMACfragNum,
+                        &cbHeaderSize
+                        );
+
+    if (MACbIsRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_PS)) {
+        // Disable PS
+        MACbPSWakeup(pDevice->PortOffset);
+    }
+
+    pDevice->bPWBitOn = FALSE;
+
+    pLastTD = pHeadTD;
+    for (ii = 0; ii < uMACfragNum; ii++) {
+        // Poll Transmit the adapter
+        wmb();
+        pHeadTD->m_td0TD0.f1Owner=OWNED_BY_NIC;
+        wmb();
+        if (ii == (uMACfragNum - 1))
+            pLastTD = pHeadTD;
+        pHeadTD = pHeadTD->next;
+    }
+
+    pLastTD->pTDInfo->skb = 0;
+    pLastTD->pTDInfo->byFlags = 0;
+
+    pDevice->apCurrTD[TYPE_AC0DMA] = pHeadTD;
+
+    MACvTransmitAC0(pDevice->PortOffset);
+
+    return TRUE;
+}
+
+
+
diff --git a/drivers/staging/vt6655/wroute.h b/drivers/staging/vt6655/wroute.h
new file mode 100644
index 00000000000..ea5f5896e9b
--- /dev/null
+++ b/drivers/staging/vt6655/wroute.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: wroute.h
+ *
+ * Purpose:
+ *
+ * Author: Lyndon Chen
+ *
+ * Date: May 21, 2003
+ *
+ */
+
+
+#ifndef __WROUTE_H__
+#define __WROUTE_H__
+
+
+#if !defined(__DEVICE_H__)
+#include "device.h"
+#endif
+
+
+
+/*---------------------  Export Definitions -------------------------*/
+
+/*---------------------  Export Classes  ----------------------------*/
+
+/*---------------------  Export Variables  --------------------------*/
+
+/*---------------------  Export Functions  --------------------------*/
+
+
+#ifdef __cplusplus
+extern "C" {                            /* Assume C declarations for C++ */
+#endif /* __cplusplus */
+
+BOOL ROUTEbRelay (PSDevice pDevice, PBYTE pbySkbData, UINT uDataLen, UINT uNodeIndex);
+
+#ifdef __cplusplus
+}                                       /* End of extern "C" { */
+#endif /* __cplusplus */
+
+
+
+
+#endif // __WROUTE_H__
+
+
+
diff --git a/drivers/staging/winbond/Makefile b/drivers/staging/winbond/Makefile
index b49c9730edd..fb2b7d432b4 100644
--- a/drivers/staging/winbond/Makefile
+++ b/drivers/staging/winbond/Makefile
@@ -7,7 +7,6 @@ w35und-objs :=			\
 	wb35reg.o		\
 	wb35rx.o		\
 	wb35tx.o		\
-	wbhal.o			\
 	wbusb.o			\
 
 
diff --git a/drivers/staging/winbond/mds.c b/drivers/staging/winbond/mds.c
index c7af09257e6..59d6d67a9f7 100644
--- a/drivers/staging/winbond/mds.c
+++ b/drivers/staging/winbond/mds.c
@@ -432,7 +432,7 @@ Mds_Tx(struct wbsoft_priv * adapter)
 		return;
 
 	//Only one thread can be run here
-	if (!atomic_inc_return(&pMds->TxThreadCount) == 1)
+	if (atomic_inc_return(&pMds->TxThreadCount) != 1)
 		goto cleanup;
 
 	// Start to fill the data
diff --git a/drivers/staging/winbond/mto.c b/drivers/staging/winbond/mto.c
index 94a060bcc62..7deb5c76976 100644
--- a/drivers/staging/winbond/mto.c
+++ b/drivers/staging/winbond/mto.c
@@ -175,7 +175,7 @@ void MTO_Init(struct wbsoft_priv *adapter)
 	}
 	else	//follow the setting from EEPROM
 		MTOPARA_TXPOWER_INDEX() = MTO_TXPOWER_FROM_EEPROM;
-	hal_set_rf_power(MTO_HAL(), (u8)MTOPARA_TXPOWER_INDEX());
+	RFSynthesizer_SetPowerIndex(MTO_HAL(), (u8)MTOPARA_TXPOWER_INDEX());
 	//------------------------------------------------
 
 	// For RSSI turning 20060808.4 Cancel load from EEPROM
diff --git a/drivers/staging/winbond/phy_calibration.c b/drivers/staging/winbond/phy_calibration.c
index af8c01e313b..8c56962ab80 100644
--- a/drivers/staging/winbond/phy_calibration.c
+++ b/drivers/staging/winbond/phy_calibration.c
@@ -340,6 +340,25 @@ void _sin_cos(s32 angle, s32 *sin, s32 *cos)
     }
 }
 
+static unsigned char hal_get_dxx_reg(struct hw_data *pHwData, u16 number, u32 * pValue)
+{
+	if (number < 0x1000)
+		number += 0x1000;
+	return Wb35Reg_ReadSync(pHwData, number, pValue);
+}
+#define hw_get_dxx_reg( _A, _B, _C ) hal_get_dxx_reg( _A, _B, (u32 *)_C )
+
+static unsigned char hal_set_dxx_reg(struct hw_data *pHwData, u16 number, u32 value)
+{
+	unsigned char ret;
+
+	if (number < 0x1000)
+		number += 0x1000;
+	ret = Wb35Reg_WriteSync(pHwData, number, value);
+	return ret;
+}
+#define hw_set_dxx_reg( _A, _B, _C ) hal_set_dxx_reg( _A, _B, (u32)_C )
+
 
 void _reset_rx_cal(struct hw_data *phw_data)
 {
diff --git a/drivers/staging/winbond/wbhal.c b/drivers/staging/winbond/wbhal.c
deleted file mode 100644
index c985ad06523..00000000000
--- a/drivers/staging/winbond/wbhal.c
+++ /dev/null
@@ -1,568 +0,0 @@
-#include "sysdef.h"
-#include "wbhal_f.h"
-#include "wblinux_f.h"
-
-void hal_set_ethernet_address( struct hw_data * pHwData, u8 *current_address )
-{
-	u32 ltmp[2];
-
-	if( pHwData->SurpriseRemove ) return;
-
-	memcpy( pHwData->CurrentMacAddress, current_address, ETH_ALEN );
-
-	ltmp[0]= cpu_to_le32( *(u32 *)pHwData->CurrentMacAddress );
-	ltmp[1]= cpu_to_le32( *(u32 *)(pHwData->CurrentMacAddress + 4) ) & 0xffff;
-
-	Wb35Reg_BurstWrite( pHwData, 0x03e8, ltmp, 2, AUTO_INCREMENT );
-}
-
-void hal_get_permanent_address( struct hw_data * pHwData, u8 *pethernet_address )
-{
-	if( pHwData->SurpriseRemove ) return;
-
-	memcpy( pethernet_address, pHwData->PermanentMacAddress, 6 );
-}
-
-static void hal_led_control(unsigned long data)
-{
-	struct wbsoft_priv *adapter = (struct wbsoft_priv *) data;
-	struct hw_data * pHwData = &adapter->sHwData;
-	struct wb35_reg *reg = &pHwData->reg;
-	u32	LEDSet = (pHwData->SoftwareSet & HAL_LED_SET_MASK) >> HAL_LED_SET_SHIFT;
-	u8	LEDgray[20] = { 0,3,4,6,8,10,11,12,13,14,15,14,13,12,11,10,8,6,4,2 };
-	u8	LEDgray2[30] = { 7,8,9,10,11,12,13,14,15,0,0,0,0,0,0,0,0,0,0,0,0,0,15,14,13,12,11,10,9,8 };
-	u32	TimeInterval = 500, ltmp, ltmp2;
-        ltmp=0;
-
-	if( pHwData->SurpriseRemove ) return;
-
-	if( pHwData->LED_control ) {
-		ltmp2 = pHwData->LED_control & 0xff;
-		if( ltmp2 == 5 ) // 5 is WPS mode
-		{
-			TimeInterval = 100;
-			ltmp2 = (pHwData->LED_control>>8) & 0xff;
-			switch( ltmp2 )
-			{
-				case 1: // [0.2 On][0.1 Off]...
-					pHwData->LED_Blinking %= 3;
-					ltmp = 0x1010; // Led 1 & 0 Green and Red
-					if( pHwData->LED_Blinking == 2 ) // Turn off
-						ltmp = 0;
-					break;
-				case 2: // [0.1 On][0.1 Off]...
-					pHwData->LED_Blinking %= 2;
-					ltmp = 0x0010; // Led 0 red color
-					if( pHwData->LED_Blinking ) // Turn off
-						ltmp = 0;
-					break;
-				case 3: // [0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.5 Off]...
-					pHwData->LED_Blinking %= 15;
-					ltmp = 0x0010; // Led 0 red color
-					if( (pHwData->LED_Blinking >= 9) || (pHwData->LED_Blinking%2) ) // Turn off 0.6 sec
-						ltmp = 0;
-					break;
-				case 4: // [300 On][ off ]
-					ltmp = 0x1000; // Led 1 Green color
-					if( pHwData->LED_Blinking >= 3000 )
-						ltmp = 0; // led maybe on after 300sec * 32bit counter overlap.
-					break;
-			}
-			pHwData->LED_Blinking++;
-
-			reg->U1BC_LEDConfigure = ltmp;
-			if( LEDSet != 7 ) // Only 111 mode has 2 LEDs on PCB.
-			{
-				reg->U1BC_LEDConfigure |= (ltmp &0xff)<<8; // Copy LED result to each LED control register
-				reg->U1BC_LEDConfigure |= (ltmp &0xff00)>>8;
-			}
-			Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
-		}
-	}
-	else if( pHwData->CurrentRadioSw || pHwData->CurrentRadioHw ) // If radio off
-	{
-		if( reg->U1BC_LEDConfigure & 0x1010 )
-		{
-			reg->U1BC_LEDConfigure &= ~0x1010;
-			Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
-		}
-	}
-	else
-	{
-		switch( LEDSet )
-		{
-			case 4: // [100] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
-				if( !pHwData->LED_LinkOn ) // Blink only if not Link On
-				{
-					// Blinking if scanning is on progress
-					if( pHwData->LED_Scanning )
-					{
-						if( pHwData->LED_Blinking == 0 )
-						{
-							reg->U1BC_LEDConfigure |= 0x10;
-							Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 On
-							pHwData->LED_Blinking = 1;
-							TimeInterval = 300;
-						}
-						else
-						{
-							reg->U1BC_LEDConfigure &= ~0x10;
-							Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
-							pHwData->LED_Blinking = 0;
-							TimeInterval = 300;
-						}
-					}
-					else
-					{
-						//Turn Off LED_0
-						if( reg->U1BC_LEDConfigure & 0x10 )
-						{
-							reg->U1BC_LEDConfigure &= ~0x10;
-							Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
-						}
-					}
-				}
-				else
-				{
-					// Turn On LED_0
-					if( (reg->U1BC_LEDConfigure & 0x10) == 0 )
-					{
-						reg->U1BC_LEDConfigure |= 0x10;
-						Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
-					}
-				}
-				break;
-
-			case 6: // [110] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
-				if( !pHwData->LED_LinkOn ) // Blink only if not Link On
-				{
-					// Blinking if scanning is on progress
-					if( pHwData->LED_Scanning )
-					{
-						if( pHwData->LED_Blinking == 0 )
-						{
-							reg->U1BC_LEDConfigure &= ~0xf;
-							reg->U1BC_LEDConfigure |= 0x10;
-							Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 On
-							pHwData->LED_Blinking = 1;
-							TimeInterval = 300;
-						}
-						else
-						{
-							reg->U1BC_LEDConfigure &= ~0x1f;
-							Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
-							pHwData->LED_Blinking = 0;
-							TimeInterval = 300;
-						}
-					}
-					else
-					{
-						// 20060901 Gray blinking if in disconnect state and not scanning
-						ltmp = reg->U1BC_LEDConfigure;
-						reg->U1BC_LEDConfigure &= ~0x1f;
-						if( LEDgray2[(pHwData->LED_Blinking%30)] )
-						{
-							reg->U1BC_LEDConfigure |= 0x10;
-							reg->U1BC_LEDConfigure |= LEDgray2[ (pHwData->LED_Blinking%30) ];
-						}
-						pHwData->LED_Blinking++;
-						if( reg->U1BC_LEDConfigure != ltmp )
-							Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
-						TimeInterval = 100;
-					}
-				}
-				else
-				{
-					// Turn On LED_0
-					if( (reg->U1BC_LEDConfigure & 0x10) == 0 )
-					{
-						reg->U1BC_LEDConfigure |= 0x10;
-						Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
-					}
-				}
-				break;
-
-			case 5: // [101] Only 1 Led be placed on PCB and use LED_1 for showing
-				if( !pHwData->LED_LinkOn ) // Blink only if not Link On
-				{
-					// Blinking if scanning is on progress
-					if( pHwData->LED_Scanning )
-					{
-						if( pHwData->LED_Blinking == 0 )
-						{
-							reg->U1BC_LEDConfigure |= 0x1000;
-							Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
-							pHwData->LED_Blinking = 1;
-							TimeInterval = 300;
-						}
-						else
-						{
-							reg->U1BC_LEDConfigure &= ~0x1000;
-							Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 Off
-							pHwData->LED_Blinking = 0;
-							TimeInterval = 300;
-						}
-					}
-					else
-					{
-						//Turn Off LED_1
-						if( reg->U1BC_LEDConfigure & 0x1000 )
-						{
-							reg->U1BC_LEDConfigure &= ~0x1000;
-							Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 Off
-						}
-					}
-				}
-				else
-				{
-					// Is transmitting/receiving ??
-					if( (adapter->RxByteCount != pHwData->RxByteCountLast ) ||
-						(adapter->TxByteCount != pHwData->TxByteCountLast ) )
-					{
-						if( (reg->U1BC_LEDConfigure & 0x3000) != 0x3000 )
-						{
-							reg->U1BC_LEDConfigure |= 0x3000;
-							Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
-						}
-
-						// Update variable
-						pHwData->RxByteCountLast = adapter->RxByteCount;
-						pHwData->TxByteCountLast = adapter->TxByteCount;
-						TimeInterval = 200;
-					}
-					else
-					{
-						// Turn On LED_1 and blinking if transmitting/receiving
-						 if( (reg->U1BC_LEDConfigure & 0x3000) != 0x1000 )
-						 {
-							 reg->U1BC_LEDConfigure &= ~0x3000;
-							 reg->U1BC_LEDConfigure |= 0x1000;
-							 Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
-						 }
-					}
-				}
-				break;
-
-			default: // Default setting. 2 LED be placed on PCB. LED_0: Link On LED_1 Active
-				if( (reg->U1BC_LEDConfigure & 0x3000) != 0x3000 )
-				{
-					reg->U1BC_LEDConfigure |= 0x3000;// LED_1 is always on and event enable
-					Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
-				}
-
-				if( pHwData->LED_Blinking )
-				{
-					// Gray blinking
-					reg->U1BC_LEDConfigure &= ~0x0f;
-					reg->U1BC_LEDConfigure |= 0x10;
-					reg->U1BC_LEDConfigure |= LEDgray[ (pHwData->LED_Blinking-1)%20 ];
-					Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
-
-					pHwData->LED_Blinking += 2;
-					if( pHwData->LED_Blinking < 40 )
-						TimeInterval = 100;
-					else
-					{
-						pHwData->LED_Blinking = 0; // Stop blinking
-						reg->U1BC_LEDConfigure &= ~0x0f;
-						Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
-					}
-					break;
-				}
-
-				if( pHwData->LED_LinkOn )
-				{
-					if( !(reg->U1BC_LEDConfigure & 0x10) ) // Check the LED_0
-					{
-						//Try to turn ON LED_0 after gray blinking
-						reg->U1BC_LEDConfigure |= 0x10;
-						pHwData->LED_Blinking = 1; //Start blinking
-						TimeInterval = 50;
-					}
-				}
-				else
-				{
-					if( reg->U1BC_LEDConfigure & 0x10 ) // Check the LED_0
-					{
-						reg->U1BC_LEDConfigure &= ~0x10;
-						Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
-					}
-				}
-				break;
-		}
-
-		//20060828.1 Active send null packet to avoid AP disconnect
-		if( pHwData->LED_LinkOn )
-		{
-			pHwData->NullPacketCount += TimeInterval;
-			if( pHwData->NullPacketCount >= DEFAULT_NULL_PACKET_COUNT )
-			{
-				pHwData->NullPacketCount = 0;
-			}
-		}
-	}
-
-	pHwData->time_count += TimeInterval;
-	Wb35Tx_CurrentTime(adapter, pHwData->time_count); // 20060928 add
-	pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(TimeInterval);
-	add_timer(&pHwData->LEDTimer);
-}
-
-u8 hal_init_hardware(struct ieee80211_hw *hw)
-{
-	struct wbsoft_priv *priv = hw->priv;
-	struct hw_data * pHwData = &priv->sHwData;
-	u16 SoftwareSet;
-
-	// Initial the variable
-	pHwData->MaxReceiveLifeTime = DEFAULT_MSDU_LIFE_TIME; // Setting Rx maximum MSDU life time
-	pHwData->FragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD; // Setting default fragment threshold
-
-	pHwData->InitialResource = 1;
-	if( Wb35Reg_initial(pHwData)) {
-		pHwData->InitialResource = 2;
-		if (Wb35Tx_initial(pHwData)) {
-			pHwData->InitialResource = 3;
-			if (Wb35Rx_initial(pHwData)) {
-				pHwData->InitialResource = 4;
-				init_timer(&pHwData->LEDTimer);
-				pHwData->LEDTimer.function = hal_led_control;
-				pHwData->LEDTimer.data = (unsigned long) priv;
-				pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(1000);
-				add_timer(&pHwData->LEDTimer);
-
-				//
-				// For restrict to vendor's hardware
-				//
-				SoftwareSet = hal_software_set( pHwData );
-
-				#ifdef Vendor2
-				// Try to make sure the EEPROM contain
-				SoftwareSet >>= 8;
-				if( SoftwareSet != 0x82 )
-					return false;
-				#endif
-
-				Wb35Rx_start(hw);
-				Wb35Tx_EP2VM_start(priv);
-
-				return true;
-			}
-		}
-	}
-
-	pHwData->SurpriseRemove = 1;
-	return false;
-}
-
-
-void hal_halt(struct hw_data * pHwData, void *ppa_data)
-{
-	switch( pHwData->InitialResource )
-	{
-		case 4:
-		case 3: del_timer_sync(&pHwData->LEDTimer);
-			msleep(100); // Wait for Timer DPC exit 940623.2
-			Wb35Rx_destroy( pHwData ); // Release the Rx
-		case 2: Wb35Tx_destroy( pHwData ); // Release the Tx
-		case 1: Wb35Reg_destroy( pHwData ); // Release the Wb35 Regisster resources
-	}
-}
-
-//---------------------------------------------------------------------------------------------------
-void hal_set_beacon_period(  struct hw_data * pHwData,  u16 beacon_period )
-{
-	u32	tmp;
-
-	if( pHwData->SurpriseRemove ) return;
-
-	pHwData->BeaconPeriod = beacon_period;
-	tmp = pHwData->BeaconPeriod << 16;
-	tmp |= pHwData->ProbeDelay;
-	Wb35Reg_Write( pHwData, 0x0848, tmp );
-}
-
-
-static void hal_set_current_channel_ex(  struct hw_data * pHwData,  ChanInfo channel )
-{
-	struct wb35_reg *reg = &pHwData->reg;
-
-	if( pHwData->SurpriseRemove )
-		return;
-
-	printk("Going to channel: %d/%d\n", channel.band, channel.ChanNo);
-
-	RFSynthesizer_SwitchingChannel( pHwData, channel );// Switch channel
-	pHwData->Channel = channel.ChanNo;
-	pHwData->band = channel.band;
-	#ifdef _PE_STATE_DUMP_
-	printk("Set channel is %d, band =%d\n", pHwData->Channel, pHwData->band);
-	#endif
-	reg->M28_MacControl &= ~0xff; // Clean channel information field
-	reg->M28_MacControl |= channel.ChanNo;
-	Wb35Reg_WriteWithCallbackValue( pHwData, 0x0828, reg->M28_MacControl,
-					(s8 *)&channel, sizeof(ChanInfo));
-}
-//---------------------------------------------------------------------------------------------------
-void hal_set_current_channel(  struct hw_data * pHwData,  ChanInfo channel )
-{
-	hal_set_current_channel_ex( pHwData, channel );
-}
-//---------------------------------------------------------------------------------------------------
-void hal_set_accept_broadcast(  struct hw_data * pHwData,  u8 enable )
-{
-	struct wb35_reg *reg = &pHwData->reg;
-
-	if( pHwData->SurpriseRemove ) return;
-
-	reg->M00_MacControl &= ~0x02000000;//The HW value
-
-	if (enable)
-		reg->M00_MacControl |= 0x02000000;//The HW value
-
-	Wb35Reg_Write( pHwData, 0x0800, reg->M00_MacControl );
-}
-
-//for wep key error detection, we need to accept broadcast packets to be received temporary.
-void hal_set_accept_promiscuous( struct hw_data * pHwData,  u8 enable)
-{
-	struct wb35_reg *reg = &pHwData->reg;
-
-	if (pHwData->SurpriseRemove) return;
-	if (enable) {
-		reg->M00_MacControl |= 0x00400000;
-		Wb35Reg_Write( pHwData, 0x0800, reg->M00_MacControl );
-	} else {
-		reg->M00_MacControl&=~0x00400000;
-		Wb35Reg_Write( pHwData, 0x0800, reg->M00_MacControl );
-	}
-}
-
-void hal_set_accept_multicast(  struct hw_data * pHwData,  u8 enable )
-{
-	struct wb35_reg *reg = &pHwData->reg;
-
-	if( pHwData->SurpriseRemove ) return;
-
-	reg->M00_MacControl &= ~0x01000000;//The HW value
-	if (enable)  reg->M00_MacControl |= 0x01000000;//The HW value
-	Wb35Reg_Write( pHwData, 0x0800, reg->M00_MacControl );
-}
-
-void hal_set_accept_beacon(  struct hw_data * pHwData,  u8 enable )
-{
-	struct wb35_reg *reg = &pHwData->reg;
-
-	if( pHwData->SurpriseRemove ) return;
-
-	// 20040108 debug
-	if( !enable )//Due to SME and MLME are not suitable for 35
-		return;
-
-	reg->M00_MacControl &= ~0x04000000;//The HW value
-	if( enable )
-		reg->M00_MacControl |= 0x04000000;//The HW value
-
-	Wb35Reg_Write( pHwData, 0x0800, reg->M00_MacControl );
-}
-//---------------------------------------------------------------------------------------------------
-
-void hal_stop(  struct hw_data * pHwData )
-{
-	struct wb35_reg *reg = &pHwData->reg;
-
-	pHwData->Wb35Rx.rx_halt = 1;
-	Wb35Rx_stop( pHwData );
-
-	pHwData->Wb35Tx.tx_halt = 1;
-	Wb35Tx_stop( pHwData );
-
-	reg->D00_DmaControl &= ~0xc0000000;//Tx Off, Rx Off
-	Wb35Reg_Write( pHwData, 0x0400, reg->D00_DmaControl );
-}
-
-unsigned char hal_idle(struct hw_data * pHwData)
-{
-	struct wb35_reg *reg = &pHwData->reg;
-	struct wb_usb *pWbUsb = &pHwData->WbUsb;
-
-	if( !pHwData->SurpriseRemove && ( pWbUsb->DetectCount || reg->EP0vm_state!=VM_STOP ) )
-		return false;
-
-	return true;
-}
-//---------------------------------------------------------------------------------------------------
-void hal_set_phy_type(  struct hw_data * pHwData,  u8 PhyType )
-{
-	pHwData->phy_type = PhyType;
-}
-
-void hal_set_radio_mode( struct hw_data * pHwData,  unsigned char radio_off)
-{
-	struct wb35_reg *reg = &pHwData->reg;
-
-	if( pHwData->SurpriseRemove ) return;
-
-	if (radio_off)	//disable Baseband receive off
-	{
-		pHwData->CurrentRadioSw = 1; // off
-		reg->M24_MacControl &= 0xffffffbf;
-	}
-	else
-	{
-		pHwData->CurrentRadioSw = 0; // on
-		reg->M24_MacControl |= 0x00000040;
-	}
-	Wb35Reg_Write( pHwData, 0x0824, reg->M24_MacControl );
-}
-
-u8 hal_get_antenna_number(  struct hw_data * pHwData )
-{
-	struct wb35_reg *reg = &pHwData->reg;
-
-	if ((reg->BB2C & BIT(11)) == 0)
-		return 0;
-	else
-		return 1;
-}
-
-//----------------------------------------------------------------------------------------------------
-//0 : radio on; 1: radio off
-u8 hal_get_hw_radio_off(  struct hw_data * pHwData )
-{
-	struct wb35_reg *reg = &pHwData->reg;
-
-	if( pHwData->SurpriseRemove ) return 1;
-
-	//read the bit16 of register U1B0
-	Wb35Reg_Read( pHwData, 0x3b0, &reg->U1B0 );
-	if ((reg->U1B0 & 0x00010000)) {
-		pHwData->CurrentRadioHw = 1;
-		return 1;
-	} else {
-		pHwData->CurrentRadioHw = 0;
-		return 0;
-	}
-}
-
-unsigned char hal_get_dxx_reg(  struct hw_data * pHwData,  u16 number,  u32 * pValue )
-{
-	if( number < 0x1000 )
-		number += 0x1000;
-	return Wb35Reg_ReadSync( pHwData, number, pValue );
-}
-
-unsigned char hal_set_dxx_reg(  struct hw_data * pHwData,  u16 number,  u32 value )
-{
-	unsigned char	ret;
-
-	if( number < 0x1000 )
-		number += 0x1000;
-	ret = Wb35Reg_WriteSync( pHwData, number, value );
-	return ret;
-}
-
-void hal_set_rf_power(struct hw_data * pHwData, u8 PowerIndex)
-{
-	RFSynthesizer_SetPowerIndex( pHwData, PowerIndex );
-}
diff --git a/drivers/staging/winbond/wbhal_f.h b/drivers/staging/winbond/wbhal_f.h
index efcaefb6aa5..bfdf05d489f 100644
--- a/drivers/staging/winbond/wbhal_f.h
+++ b/drivers/staging/winbond/wbhal_f.h
@@ -18,10 +18,6 @@ void hal_clear_all_default_key(  struct hw_data * pHwData );
 void hal_clear_all_group_key(  struct hw_data * pHwData );
 void hal_clear_all_mapping_key(  struct hw_data * pHwData );
 void hal_clear_all_key(  struct hw_data * pHwData );
-void hal_get_ethernet_address(  struct hw_data * pHwData,  u8 *current_address );
-void hal_set_ethernet_address(  struct hw_data * pHwData,  u8 *current_address );
-void hal_get_permanent_address(  struct hw_data * pHwData,  u8 *pethernet_address );
-u8 hal_init_hardware(struct ieee80211_hw *hw);
 void hal_set_power_save_mode(  struct hw_data * pHwData,  unsigned char power_save,  unsigned char wakeup,  unsigned char dtim );
 void hal_get_power_save_mode(  struct hw_data * pHwData,   u8 *pin_pwr_save );
 void hal_set_slot_time(  struct hw_data * pHwData,  u8 type );
@@ -33,33 +29,21 @@ void hal_resume_sync_bss(  struct hw_data * pHwData);
 void hal_set_aid(  struct hw_data * pHwData,  u16 aid );
 void hal_set_bssid(  struct hw_data * pHwData,  u8 *pbssid );
 void hal_get_bssid(  struct hw_data * pHwData,  u8 *pbssid );
-void hal_set_beacon_period(  struct hw_data * pHwData,  u16 beacon_period );
 void hal_set_listen_interval(  struct hw_data * pHwData,  u16 listen_interval );
 void hal_set_cap_info(  struct hw_data * pHwData,  u16 capability_info );
 void hal_set_ssid(  struct hw_data * pHwData,  u8 *pssid,  u8 ssid_len );
-void hal_set_current_channel(  struct hw_data * pHwData,  ChanInfo channel );
-void hal_set_accept_broadcast(  struct hw_data * pHwData,  u8 enable );
-void hal_set_accept_multicast(  struct hw_data * pHwData,  u8 enable );
-void hal_set_accept_beacon(  struct hw_data * pHwData,  u8 enable );
-void hal_stop(  struct hw_data * pHwData );
-void hal_halt(  struct hw_data * pHwData, void *ppa_data );
 void hal_start_tx0(  struct hw_data * pHwData );
-void hal_set_phy_type(  struct hw_data * pHwData,  u8 PhyType );
 #define hal_get_cwmin( _A ) ( (_A)->cwmin )
 void hal_set_cwmax(  struct hw_data * pHwData,  u16 cwin_max );
 #define hal_get_cwmax( _A ) ( (_A)->cwmax )
 void hal_set_rsn_wpa(  struct hw_data * pHwData,  u32 * RSN_IE_Bitmap , u32 * RSN_OUI_type , unsigned char bDesiredAuthMode);
 void hal_set_connect_info(  struct hw_data * pHwData,  unsigned char boConnect );
 u8 hal_get_est_sq3(  struct hw_data * pHwData,  u8 Count );
-void hal_set_rf_power(  struct hw_data * pHwData,  u8 PowerIndex ); // 20060621 Modify
-void hal_set_radio_mode(  struct hw_data * pHwData,  unsigned char boValue);
 void hal_descriptor_indicate(  struct hw_data * pHwData,  PDESCRIPTOR pDes );
 u8 hal_get_antenna_number(  struct hw_data * pHwData );
 u32 hal_get_bss_pk_cnt(  struct hw_data * pHwData );
 #define hal_get_region_from_EEPROM( _A ) ( (_A)->reg.EEPROMRegion )
-void hal_set_accept_promiscuous		(  struct hw_data * pHwData,  u8 enable);
 #define hal_get_tx_buffer( _A, _B ) Wb35Tx_get_tx_buffer( _A, _B )
-u8 hal_get_hw_radio_off			(  struct hw_data * pHwData );
 #define hal_software_set( _A )		(_A->SoftwareSet)
 #define hal_driver_init_OK( _A )	(_A->IsInitOK)
 #define hal_rssi_boundary_high( _A ) (_A->RSSI_high)
@@ -68,8 +52,6 @@ u8 hal_get_hw_radio_off			(  struct hw_data * pHwData );
 
 #define PHY_DEBUG( msg, args... )
 
-unsigned char hal_get_dxx_reg(  struct hw_data * pHwData,  u16 number,  u32 * pValue );
-unsigned char hal_set_dxx_reg(  struct hw_data * pHwData,  u16 number,  u32 value );
 #define hal_get_time_count( _P )	(_P->time_count/10)	// return 100ms count
 #define hal_detect_error( _P )		(_P->WbUsb.DetectCount)
 
@@ -82,10 +64,7 @@ unsigned char hal_set_dxx_reg(  struct hw_data * pHwData,  u16 number,  u32 valu
 #define hal_get_clear_interrupt(_A)
 #define hal_ibss_disconnect(_A) hal_stop_sync_bss(_A)
 #define hal_join_request_stop(_A)
-unsigned char	hal_idle(  struct hw_data * pHwData );
 #define hw_get_cxx_reg( _A, _B, _C )
 #define hw_set_cxx_reg( _A, _B, _C )
-#define hw_get_dxx_reg( _A, _B, _C )	hal_get_dxx_reg( _A, _B, (u32 *)_C )
-#define hw_set_dxx_reg( _A, _B, _C )	hal_set_dxx_reg( _A, _B, (u32)_C )
 
 
diff --git a/drivers/staging/winbond/wbhal_s.h b/drivers/staging/winbond/wbhal_s.h
index acfebf05d9d..16d0e6f8311 100644
--- a/drivers/staging/winbond/wbhal_s.h
+++ b/drivers/staging/winbond/wbhal_s.h
@@ -401,7 +401,6 @@ struct hw_data {
 
 	// For surprise remove
 	u32	SurpriseRemove; // 0: Normal 1: Surprise remove
-	u8	InitialResource;
 	u8	IsKeyPreSet;
 	u8	CalOneTime; // 20060630.1
 
diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c
index 3b2d52819b4..745279c528a 100644
--- a/drivers/staging/winbond/wbusb.c
+++ b/drivers/staging/winbond/wbusb.c
@@ -2,6 +2,12 @@
  * Copyright 2008 Pavel Machek <pavel@suse.cz>
  *
  * Distribute under GPLv2.
+ *
+ * The original driver was written by:
+ *     Jeff Lee <YY_Lee@issc.com.tw>
+ *
+ * and was adapted to the 2.6 kernel by:
+ *     Costantino Leandro (Rxart Desktop) <le_costantino@pixartargentina.com.ar>
  */
 #include <net/mac80211.h>
 #include <linux/usb.h>
@@ -13,19 +19,18 @@
 #include "wbhal_f.h"
 #include "wblinux_f.h"
 
-MODULE_AUTHOR("Original by: Jeff Lee<YY_Lee@issc.com.tw> Adapted to 2.6.x by Costantino Leandro (Rxart Desktop) <le_costantino@pixartargentina.com.ar>");
 MODULE_DESCRIPTION("IS89C35 802.11bg WLAN USB Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION("0.1");
 
 static struct usb_device_id wb35_table[] __devinitdata = {
-	{USB_DEVICE(0x0416, 0x0035)},
-	{USB_DEVICE(0x18E8, 0x6201)},
-	{USB_DEVICE(0x18E8, 0x6206)},
-	{USB_DEVICE(0x18E8, 0x6217)},
-	{USB_DEVICE(0x18E8, 0x6230)},
-	{USB_DEVICE(0x18E8, 0x6233)},
-	{USB_DEVICE(0x1131, 0x2035)},
+	{ USB_DEVICE(0x0416, 0x0035) },
+	{ USB_DEVICE(0x18E8, 0x6201) },
+	{ USB_DEVICE(0x18E8, 0x6206) },
+	{ USB_DEVICE(0x18E8, 0x6217) },
+	{ USB_DEVICE(0x18E8, 0x6230) },
+	{ USB_DEVICE(0x18E8, 0x6233) },
+	{ USB_DEVICE(0x1131, 0x2035) },
 	{ 0, }
 };
 
@@ -36,7 +41,7 @@ static struct ieee80211_rate wbsoft_rates[] = {
 };
 
 static struct ieee80211_channel wbsoft_channels[] = {
-	{ .center_freq = 2412},
+	{ .center_freq = 2412 },
 };
 
 static struct ieee80211_supported_band wbsoft_band_2GHz = {
@@ -47,14 +52,14 @@ static struct ieee80211_supported_band wbsoft_band_2GHz = {
 };
 
 static int wbsoft_add_interface(struct ieee80211_hw *dev,
-				 struct ieee80211_if_init_conf *conf)
+				struct ieee80211_if_init_conf *conf)
 {
 	printk("wbsoft_add interface called\n");
 	return 0;
 }
 
 static void wbsoft_remove_interface(struct ieee80211_hw *dev,
-				     struct ieee80211_if_init_conf *conf)
+				    struct ieee80211_if_init_conf *conf)
 {
 	printk("wbsoft_remove interface called\n");
 }
@@ -79,36 +84,18 @@ static int wbsoft_get_tx_stats(struct ieee80211_hw *hw,
 }
 
 static void wbsoft_configure_filter(struct ieee80211_hw *dev,
-				     unsigned int changed_flags,
-				     unsigned int *total_flags,
-				     int mc_count, struct dev_mc_list *mclist)
+				    unsigned int changed_flags,
+				    unsigned int *total_flags,
+				    int mc_count, struct dev_mc_list *mclist)
 {
-	unsigned int bit_nr, new_flags;
-	u32 mc_filter[2];
-	int i;
+	unsigned int new_flags;
 
 	new_flags = 0;
 
-	if (*total_flags & FIF_PROMISC_IN_BSS) {
+	if (*total_flags & FIF_PROMISC_IN_BSS)
 		new_flags |= FIF_PROMISC_IN_BSS;
-		mc_filter[1] = mc_filter[0] = ~0;
-	} else if ((*total_flags & FIF_ALLMULTI) || (mc_count > 32)) {
+	else if ((*total_flags & FIF_ALLMULTI) || (mc_count > 32))
 		new_flags |= FIF_ALLMULTI;
-		mc_filter[1] = mc_filter[0] = ~0;
-	} else {
-		mc_filter[1] = mc_filter[0] = 0;
-		for (i = 0; i < mc_count; i++) {
-			if (!mclist)
-				break;
-			printk("Should call ether_crc here\n");
-			//bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
-			bit_nr = 0;
-
-			bit_nr &= 0x3F;
-			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
-			mclist = mclist->next;
-		}
-	}
 
 	dev->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS;
 
@@ -124,7 +111,6 @@ static int wbsoft_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 	return NETDEV_TX_OK;
 }
 
-
 static int wbsoft_start(struct ieee80211_hw *dev)
 {
 	struct wbsoft_priv *priv = dev->priv;
@@ -134,6 +120,127 @@ static int wbsoft_start(struct ieee80211_hw *dev)
 	return 0;
 }
 
+static void hal_set_radio_mode(struct hw_data *pHwData, unsigned char radio_off)
+{
+	struct wb35_reg *reg = &pHwData->reg;
+
+	if (pHwData->SurpriseRemove)
+		return;
+
+	if (radio_off)		//disable Baseband receive off
+	{
+		pHwData->CurrentRadioSw = 1;	// off
+		reg->M24_MacControl &= 0xffffffbf;
+	} else {
+		pHwData->CurrentRadioSw = 0;	// on
+		reg->M24_MacControl |= 0x00000040;
+	}
+	Wb35Reg_Write(pHwData, 0x0824, reg->M24_MacControl);
+}
+
+static void hal_set_beacon_period(struct hw_data *pHwData, u16 beacon_period)
+{
+	u32 tmp;
+
+	if (pHwData->SurpriseRemove)
+		return;
+
+	pHwData->BeaconPeriod = beacon_period;
+	tmp = pHwData->BeaconPeriod << 16;
+	tmp |= pHwData->ProbeDelay;
+	Wb35Reg_Write(pHwData, 0x0848, tmp);
+}
+
+static void
+hal_set_current_channel_ex(struct hw_data *pHwData, ChanInfo channel)
+{
+	struct wb35_reg *reg = &pHwData->reg;
+
+	if (pHwData->SurpriseRemove)
+		return;
+
+	printk("Going to channel: %d/%d\n", channel.band, channel.ChanNo);
+
+	RFSynthesizer_SwitchingChannel(pHwData, channel);	// Switch channel
+	pHwData->Channel = channel.ChanNo;
+	pHwData->band = channel.band;
+#ifdef _PE_STATE_DUMP_
+	printk("Set channel is %d, band =%d\n", pHwData->Channel,
+	       pHwData->band);
+#endif
+	reg->M28_MacControl &= ~0xff;	// Clean channel information field
+	reg->M28_MacControl |= channel.ChanNo;
+	Wb35Reg_WriteWithCallbackValue(pHwData, 0x0828, reg->M28_MacControl,
+				       (s8 *) & channel, sizeof(ChanInfo));
+}
+
+static void hal_set_current_channel(struct hw_data *pHwData, ChanInfo channel)
+{
+	hal_set_current_channel_ex(pHwData, channel);
+}
+
+static void hal_set_accept_broadcast(struct hw_data *pHwData, u8 enable)
+{
+	struct wb35_reg *reg = &pHwData->reg;
+
+	if (pHwData->SurpriseRemove)
+		return;
+
+	reg->M00_MacControl &= ~0x02000000;	//The HW value
+
+	if (enable)
+		reg->M00_MacControl |= 0x02000000;	//The HW value
+
+	Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl);
+}
+
+//for wep key error detection, we need to accept broadcast packets to be received temporary.
+static void hal_set_accept_promiscuous(struct hw_data *pHwData, u8 enable)
+{
+	struct wb35_reg *reg = &pHwData->reg;
+
+	if (pHwData->SurpriseRemove)
+		return;
+	if (enable) {
+		reg->M00_MacControl |= 0x00400000;
+		Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl);
+	} else {
+		reg->M00_MacControl &= ~0x00400000;
+		Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl);
+	}
+}
+
+static void hal_set_accept_multicast(struct hw_data *pHwData, u8 enable)
+{
+	struct wb35_reg *reg = &pHwData->reg;
+
+	if (pHwData->SurpriseRemove)
+		return;
+
+	reg->M00_MacControl &= ~0x01000000;	//The HW value
+	if (enable)
+		reg->M00_MacControl |= 0x01000000;	//The HW value
+	Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl);
+}
+
+static void hal_set_accept_beacon(struct hw_data *pHwData, u8 enable)
+{
+	struct wb35_reg *reg = &pHwData->reg;
+
+	if (pHwData->SurpriseRemove)
+		return;
+
+	// 20040108 debug
+	if (!enable)		//Due to SME and MLME are not suitable for 35
+		return;
+
+	reg->M00_MacControl &= ~0x04000000;	//The HW value
+	if (enable)
+		reg->M00_MacControl |= 0x04000000;	//The HW value
+
+	Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl);
+}
+
 static int wbsoft_config(struct ieee80211_hw *dev, u32 changed)
 {
 	struct wbsoft_priv *priv = dev->priv;
@@ -142,36 +249,18 @@ static int wbsoft_config(struct ieee80211_hw *dev, u32 changed)
 
 	printk("wbsoft_config called\n");
 
+	/* Should use channel_num, or something, as that is already pre-translated */
 	ch.band = 1;
-	ch.ChanNo = 1;	/* Should use channel_num, or something, as that is already pre-translated */
-
+	ch.ChanNo = 1;
 
 	hal_set_current_channel(&priv->sHwData, ch);
 	hal_set_beacon_period(&priv->sHwData, conf->beacon_int);
-//	hal_set_cap_info(&priv->sHwData, ?? );
-// hal_set_ssid(struct hw_data * pHwData,  u8 * pssid,  u8 ssid_len); ??
 	hal_set_accept_broadcast(&priv->sHwData, 1);
-	hal_set_accept_promiscuous(&priv->sHwData,  1);
-	hal_set_accept_multicast(&priv->sHwData,  1);
-	hal_set_accept_beacon(&priv->sHwData,  1);
-	hal_set_radio_mode(&priv->sHwData,  0);
-	//hal_set_antenna_number(  struct hw_data * pHwData, u8 number )
-	//hal_set_rf_power(struct hw_data * pHwData, u8 PowerIndex)
-
-
-//	hal_start_bss(&priv->sHwData, WLAN_BSSTYPE_INFRASTRUCTURE);	??
+	hal_set_accept_promiscuous(&priv->sHwData, 1);
+	hal_set_accept_multicast(&priv->sHwData, 1);
+	hal_set_accept_beacon(&priv->sHwData, 1);
+	hal_set_radio_mode(&priv->sHwData, 0);
 
-//void hal_set_rates(struct hw_data * pHwData, u8 * pbss_rates,
-//		   u8 length, unsigned char basic_rate_set)
-
-	return 0;
-}
-
-static int wbsoft_config_interface(struct ieee80211_hw *dev,
-				    struct ieee80211_vif *vif,
-				    struct ieee80211_if_conf *conf)
-{
-	printk("wbsoft_config_interface called\n");
 	return 0;
 }
 
@@ -183,63 +272,448 @@ static u64 wbsoft_get_tsf(struct ieee80211_hw *dev)
 
 static const struct ieee80211_ops wbsoft_ops = {
 	.tx			= wbsoft_tx,
-	.start			= wbsoft_start,		/* Start can be pretty much empty as we do wb35_hw_init() during probe? */
+	.start			= wbsoft_start,
 	.stop			= wbsoft_stop,
 	.add_interface		= wbsoft_add_interface,
 	.remove_interface	= wbsoft_remove_interface,
 	.config			= wbsoft_config,
-	.config_interface	= wbsoft_config_interface,
 	.configure_filter	= wbsoft_configure_filter,
 	.get_stats		= wbsoft_get_stats,
 	.get_tx_stats		= wbsoft_get_tx_stats,
 	.get_tsf		= wbsoft_get_tsf,
-// conf_tx: hal_set_cwmin()/hal_set_cwmax;
 };
 
-static unsigned char wb35_hw_init(struct ieee80211_hw *hw)
+static void
+hal_set_ethernet_address(struct hw_data *pHwData, u8 * current_address)
+{
+	u32 ltmp[2];
+
+	if (pHwData->SurpriseRemove)
+		return;
+
+	memcpy(pHwData->CurrentMacAddress, current_address, ETH_ALEN);
+
+	ltmp[0] = cpu_to_le32(*(u32 *) pHwData->CurrentMacAddress);
+	ltmp[1] =
+	    cpu_to_le32(*(u32 *) (pHwData->CurrentMacAddress + 4)) & 0xffff;
+
+	Wb35Reg_BurstWrite(pHwData, 0x03e8, ltmp, 2, AUTO_INCREMENT);
+}
+
+static void
+hal_get_permanent_address(struct hw_data *pHwData, u8 * pethernet_address)
+{
+	if (pHwData->SurpriseRemove)
+		return;
+
+	memcpy(pethernet_address, pHwData->PermanentMacAddress, 6);
+}
+
+static void hal_stop(struct hw_data *pHwData)
+{
+	struct wb35_reg *reg = &pHwData->reg;
+
+	pHwData->Wb35Rx.rx_halt = 1;
+	Wb35Rx_stop(pHwData);
+
+	pHwData->Wb35Tx.tx_halt = 1;
+	Wb35Tx_stop(pHwData);
+
+	reg->D00_DmaControl &= ~0xc0000000;	//Tx Off, Rx Off
+	Wb35Reg_Write(pHwData, 0x0400, reg->D00_DmaControl);
+}
+
+static unsigned char hal_idle(struct hw_data *pHwData)
+{
+	struct wb35_reg *reg = &pHwData->reg;
+	struct wb_usb *pWbUsb = &pHwData->WbUsb;
+
+	if (!pHwData->SurpriseRemove
+	    && (pWbUsb->DetectCount || reg->EP0vm_state != VM_STOP))
+		return false;
+
+	return true;
+}
+
+u8 hal_get_antenna_number(struct hw_data *pHwData)
+{
+	struct wb35_reg *reg = &pHwData->reg;
+
+	if ((reg->BB2C & BIT(11)) == 0)
+		return 0;
+	else
+		return 1;
+}
+
+/* 0 : radio on; 1: radio off */
+static u8 hal_get_hw_radio_off(struct hw_data * pHwData)
+{
+	struct wb35_reg *reg = &pHwData->reg;
+
+	if (pHwData->SurpriseRemove)
+		return 1;
+
+	//read the bit16 of register U1B0
+	Wb35Reg_Read(pHwData, 0x3b0, &reg->U1B0);
+	if ((reg->U1B0 & 0x00010000)) {
+		pHwData->CurrentRadioHw = 1;
+		return 1;
+	} else {
+		pHwData->CurrentRadioHw = 0;
+		return 0;
+	}
+}
+
+static u8 LED_GRAY[20] = {
+	0, 3, 4, 6, 8, 10, 11, 12, 13, 14, 15, 14, 13, 12, 11, 10, 8, 6, 4, 2
+};
+
+static u8 LED_GRAY2[30] = {
+	7, 8, 9, 10, 11, 12, 13, 14, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	0, 15, 14, 13, 12, 11, 10, 9, 8
+};
+
+static void hal_led_control(unsigned long data)
+{
+	struct wbsoft_priv *adapter = (struct wbsoft_priv *)data;
+	struct hw_data *pHwData = &adapter->sHwData;
+	struct wb35_reg *reg = &pHwData->reg;
+	u32 LEDSet = (pHwData->SoftwareSet & HAL_LED_SET_MASK) >> HAL_LED_SET_SHIFT;
+	u32 TimeInterval = 500, ltmp, ltmp2;
+	ltmp = 0;
+
+	if (pHwData->SurpriseRemove)
+		return;
+
+	if (pHwData->LED_control) {
+		ltmp2 = pHwData->LED_control & 0xff;
+		if (ltmp2 == 5)	// 5 is WPS mode
+		{
+			TimeInterval = 100;
+			ltmp2 = (pHwData->LED_control >> 8) & 0xff;
+			switch (ltmp2) {
+			case 1:	// [0.2 On][0.1 Off]...
+				pHwData->LED_Blinking %= 3;
+				ltmp = 0x1010;	// Led 1 & 0 Green and Red
+				if (pHwData->LED_Blinking == 2)	// Turn off
+					ltmp = 0;
+				break;
+			case 2:	// [0.1 On][0.1 Off]...
+				pHwData->LED_Blinking %= 2;
+				ltmp = 0x0010;	// Led 0 red color
+				if (pHwData->LED_Blinking)	// Turn off
+					ltmp = 0;
+				break;
+			case 3:	// [0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.5 Off]...
+				pHwData->LED_Blinking %= 15;
+				ltmp = 0x0010;	// Led 0 red color
+				if ((pHwData->LED_Blinking >= 9) || (pHwData->LED_Blinking % 2))	// Turn off 0.6 sec
+					ltmp = 0;
+				break;
+			case 4:	// [300 On][ off ]
+				ltmp = 0x1000;	// Led 1 Green color
+				if (pHwData->LED_Blinking >= 3000)
+					ltmp = 0;	// led maybe on after 300sec * 32bit counter overlap.
+				break;
+			}
+			pHwData->LED_Blinking++;
+
+			reg->U1BC_LEDConfigure = ltmp;
+			if (LEDSet != 7)	// Only 111 mode has 2 LEDs on PCB.
+			{
+				reg->U1BC_LEDConfigure |= (ltmp & 0xff) << 8;	// Copy LED result to each LED control register
+				reg->U1BC_LEDConfigure |= (ltmp & 0xff00) >> 8;
+			}
+			Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);
+		}
+	} else if (pHwData->CurrentRadioSw || pHwData->CurrentRadioHw)	// If radio off
+	{
+		if (reg->U1BC_LEDConfigure & 0x1010) {
+			reg->U1BC_LEDConfigure &= ~0x1010;
+			Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);
+		}
+	} else {
+		switch (LEDSet) {
+		case 4:	// [100] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
+			if (!pHwData->LED_LinkOn)	// Blink only if not Link On
+			{
+				// Blinking if scanning is on progress
+				if (pHwData->LED_Scanning) {
+					if (pHwData->LED_Blinking == 0) {
+						reg->U1BC_LEDConfigure |= 0x10;
+						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	// LED_0 On
+						pHwData->LED_Blinking = 1;
+						TimeInterval = 300;
+					} else {
+						reg->U1BC_LEDConfigure &= ~0x10;
+						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	// LED_0 Off
+						pHwData->LED_Blinking = 0;
+						TimeInterval = 300;
+					}
+				} else {
+					//Turn Off LED_0
+					if (reg->U1BC_LEDConfigure & 0x10) {
+						reg->U1BC_LEDConfigure &= ~0x10;
+						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	// LED_0 Off
+					}
+				}
+			} else {
+				// Turn On LED_0
+				if ((reg->U1BC_LEDConfigure & 0x10) == 0) {
+					reg->U1BC_LEDConfigure |= 0x10;
+					Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	// LED_0 Off
+				}
+			}
+			break;
+
+		case 6:	// [110] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
+			if (!pHwData->LED_LinkOn)	// Blink only if not Link On
+			{
+				// Blinking if scanning is on progress
+				if (pHwData->LED_Scanning) {
+					if (pHwData->LED_Blinking == 0) {
+						reg->U1BC_LEDConfigure &= ~0xf;
+						reg->U1BC_LEDConfigure |= 0x10;
+						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	// LED_0 On
+						pHwData->LED_Blinking = 1;
+						TimeInterval = 300;
+					} else {
+						reg->U1BC_LEDConfigure &= ~0x1f;
+						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	// LED_0 Off
+						pHwData->LED_Blinking = 0;
+						TimeInterval = 300;
+					}
+				} else {
+					// 20060901 Gray blinking if in disconnect state and not scanning
+					ltmp = reg->U1BC_LEDConfigure;
+					reg->U1BC_LEDConfigure &= ~0x1f;
+					if (LED_GRAY2[(pHwData->LED_Blinking % 30)]) {
+						reg->U1BC_LEDConfigure |= 0x10;
+						reg->U1BC_LEDConfigure |=
+						    LED_GRAY2[(pHwData->LED_Blinking % 30)];
+					}
+					pHwData->LED_Blinking++;
+					if (reg->U1BC_LEDConfigure != ltmp)
+						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	// LED_0 Off
+					TimeInterval = 100;
+				}
+			} else {
+				// Turn On LED_0
+				if ((reg->U1BC_LEDConfigure & 0x10) == 0) {
+					reg->U1BC_LEDConfigure |= 0x10;
+					Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	// LED_0 Off
+				}
+			}
+			break;
+
+		case 5:	// [101] Only 1 Led be placed on PCB and use LED_1 for showing
+			if (!pHwData->LED_LinkOn)	// Blink only if not Link On
+			{
+				// Blinking if scanning is on progress
+				if (pHwData->LED_Scanning) {
+					if (pHwData->LED_Blinking == 0) {
+						reg->U1BC_LEDConfigure |=
+						    0x1000;
+						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	// LED_1 On
+						pHwData->LED_Blinking = 1;
+						TimeInterval = 300;
+					} else {
+						reg->U1BC_LEDConfigure &=
+						    ~0x1000;
+						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	// LED_1 Off
+						pHwData->LED_Blinking = 0;
+						TimeInterval = 300;
+					}
+				} else {
+					//Turn Off LED_1
+					if (reg->U1BC_LEDConfigure & 0x1000) {
+						reg->U1BC_LEDConfigure &=
+						    ~0x1000;
+						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	// LED_1 Off
+					}
+				}
+			} else {
+				// Is transmitting/receiving ??
+				if ((adapter->RxByteCount !=
+				     pHwData->RxByteCountLast)
+				    || (adapter->TxByteCount !=
+					pHwData->TxByteCountLast)) {
+					if ((reg->U1BC_LEDConfigure & 0x3000) !=
+					    0x3000) {
+						reg->U1BC_LEDConfigure |=
+						    0x3000;
+						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	// LED_1 On
+					}
+					// Update variable
+					pHwData->RxByteCountLast =
+					    adapter->RxByteCount;
+					pHwData->TxByteCountLast =
+					    adapter->TxByteCount;
+					TimeInterval = 200;
+				} else {
+					// Turn On LED_1 and blinking if transmitting/receiving
+					if ((reg->U1BC_LEDConfigure & 0x3000) !=
+					    0x1000) {
+						reg->U1BC_LEDConfigure &=
+						    ~0x3000;
+						reg->U1BC_LEDConfigure |=
+						    0x1000;
+						Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);	// LED_1 On
+					}
+				}
+			}
+			break;
+
+		default:	// Default setting. 2 LED be placed on PCB. LED_0: Link On LED_1 Active
+			if ((reg->U1BC_LEDConfigure & 0x3000) != 0x3000) {
+				reg->U1BC_LEDConfigure |= 0x3000;	// LED_1 is always on and event enable
+				Wb35Reg_Write(pHwData, 0x03bc,
+					      reg->U1BC_LEDConfigure);
+			}
+
+			if (pHwData->LED_Blinking) {
+				// Gray blinking
+				reg->U1BC_LEDConfigure &= ~0x0f;
+				reg->U1BC_LEDConfigure |= 0x10;
+				reg->U1BC_LEDConfigure |=
+				    LED_GRAY[(pHwData->LED_Blinking - 1) % 20];
+				Wb35Reg_Write(pHwData, 0x03bc,
+					      reg->U1BC_LEDConfigure);
+
+				pHwData->LED_Blinking += 2;
+				if (pHwData->LED_Blinking < 40)
+					TimeInterval = 100;
+				else {
+					pHwData->LED_Blinking = 0;	// Stop blinking
+					reg->U1BC_LEDConfigure &= ~0x0f;
+					Wb35Reg_Write(pHwData, 0x03bc,
+						      reg->U1BC_LEDConfigure);
+				}
+				break;
+			}
+
+			if (pHwData->LED_LinkOn) {
+				if (!(reg->U1BC_LEDConfigure & 0x10))	// Check the LED_0
+				{
+					//Try to turn ON LED_0 after gray blinking
+					reg->U1BC_LEDConfigure |= 0x10;
+					pHwData->LED_Blinking = 1;	//Start blinking
+					TimeInterval = 50;
+				}
+			} else {
+				if (reg->U1BC_LEDConfigure & 0x10)	// Check the LED_0
+				{
+					reg->U1BC_LEDConfigure &= ~0x10;
+					Wb35Reg_Write(pHwData, 0x03bc,
+						      reg->U1BC_LEDConfigure);
+				}
+			}
+			break;
+		}
+
+		//20060828.1 Active send null packet to avoid AP disconnect
+		if (pHwData->LED_LinkOn) {
+			pHwData->NullPacketCount += TimeInterval;
+			if (pHwData->NullPacketCount >=
+			    DEFAULT_NULL_PACKET_COUNT) {
+				pHwData->NullPacketCount = 0;
+			}
+		}
+	}
+
+	pHwData->time_count += TimeInterval;
+	Wb35Tx_CurrentTime(adapter, pHwData->time_count);	// 20060928 add
+	pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(TimeInterval);
+	add_timer(&pHwData->LEDTimer);
+}
+
+static int hal_init_hardware(struct ieee80211_hw *hw)
 {
 	struct wbsoft_priv *priv = hw->priv;
-	struct hw_data *	pHwData;
-	u8		*pMacAddr;
-	u8		*pMacAddr2;
-	u32		InitStep = 0;
-	u8		EEPROM_region;
-	u8		HwRadioOff;
-
-	//
-	// Setting default value for Linux
-	//
-	priv->sLocalPara.region_INF = REGION_AUTO;
-	priv->sLocalPara.TxRateMode = RATE_AUTO;
-	priv->sLocalPara.bMacOperationMode = MODE_802_11_BG;	// B/G mode
-	priv->Mds.TxRTSThreshold = DEFAULT_RTSThreshold;
-	priv->Mds.TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD;
-	hal_set_phy_type( &priv->sHwData, RF_WB_242_1 );
-	priv->sLocalPara.MTUsize = MAX_ETHERNET_PACKET_SIZE;
-	priv->sLocalPara.bPreambleMode = AUTO_MODE;
+	struct hw_data *pHwData = &priv->sHwData;
+	u16 SoftwareSet;
+
+	pHwData->MaxReceiveLifeTime = DEFAULT_MSDU_LIFE_TIME;
+	pHwData->FragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD;
+
+	if (!Wb35Reg_initial(pHwData))
+		goto error_reg_destroy;
+
+	if (!Wb35Tx_initial(pHwData))
+		goto error_tx_destroy;
+
+	if (!Wb35Rx_initial(pHwData))
+		goto error_rx_destroy;
+
+	init_timer(&pHwData->LEDTimer);
+	pHwData->LEDTimer.function = hal_led_control;
+	pHwData->LEDTimer.data = (unsigned long)priv;
+	pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(1000);
+	add_timer(&pHwData->LEDTimer);
+
+	SoftwareSet = hal_software_set(pHwData);
+
+#ifdef Vendor2
+	// Try to make sure the EEPROM contain
+	SoftwareSet >>= 8;
+	if (SoftwareSet != 0x82)
+		return false;
+#endif
+
+	Wb35Rx_start(hw);
+	Wb35Tx_EP2VM_start(priv);
+
+	return 0;
+
+error_rx_destroy:
+	Wb35Rx_destroy(pHwData);
+error_tx_destroy:
+	Wb35Tx_destroy(pHwData);
+error_reg_destroy:
+	Wb35Reg_destroy(pHwData);
+
+	pHwData->SurpriseRemove = 1;
+	return -EINVAL;
+}
+
+static int wb35_hw_init(struct ieee80211_hw *hw)
+{
+	struct wbsoft_priv *priv = hw->priv;
+	struct hw_data *pHwData = &priv->sHwData;
+	u8 EEPROM_region;
+	u8 HwRadioOff;
+	u8 *pMacAddr2;
+	u8 *pMacAddr;
+	int err;
+
+	pHwData->phy_type = RF_DECIDE_BY_INF;
+
+	priv->Mds.TxRTSThreshold		= DEFAULT_RTSThreshold;
+	priv->Mds.TxFragmentThreshold		= DEFAULT_FRAGMENT_THRESHOLD;
+
+	priv->sLocalPara.region_INF		= REGION_AUTO;
+	priv->sLocalPara.TxRateMode		= RATE_AUTO;
+	priv->sLocalPara.bMacOperationMode	= MODE_802_11_BG;
+	priv->sLocalPara.MTUsize		= MAX_ETHERNET_PACKET_SIZE;
+	priv->sLocalPara.bPreambleMode		= AUTO_MODE;
+	priv->sLocalPara.bWepKeyError		= false;
+	priv->sLocalPara.bToSelfPacketReceived	= false;
+	priv->sLocalPara.WepKeyDetectTimerCount	= 2 * 100; /* 2 seconds */
+
 	priv->sLocalPara.RadioOffStatus.boSwRadioOff = false;
-	pHwData = &priv->sHwData;
-	hal_set_phy_type( pHwData, RF_DECIDE_BY_INF );
-
-	//added by ws for wep key error detection
-	priv->sLocalPara.bWepKeyError= false;
-	priv->sLocalPara.bToSelfPacketReceived = false;
-	priv->sLocalPara.WepKeyDetectTimerCount= 2 * 100; /// 2 seconds
-
-	// Initial USB hal
-	InitStep = 1;
-	pHwData = &priv->sHwData;
-	if (!hal_init_hardware(hw))
+
+	err = hal_init_hardware(hw);
+	if (err)
 		goto error;
 
-	EEPROM_region = hal_get_region_from_EEPROM( pHwData );
+	EEPROM_region = hal_get_region_from_EEPROM(pHwData);
 	if (EEPROM_region != REGION_AUTO)
 		priv->sLocalPara.region = EEPROM_region;
 	else {
 		if (priv->sLocalPara.region_INF != REGION_AUTO)
 			priv->sLocalPara.region = priv->sLocalPara.region_INF;
 		else
-			priv->sLocalPara.region = REGION_USA;	//default setting
+			priv->sLocalPara.region = REGION_USA;	/* default setting */
 	}
 
 	// Get Software setting flag from hal
@@ -247,93 +721,80 @@ static unsigned char wb35_hw_init(struct ieee80211_hw *hw)
 	if (hal_software_set(pHwData) & 0x00000001)
 		priv->sLocalPara.boAntennaDiversity = true;
 
-	//
-	// For TS module
-	//
-	InitStep = 2;
-
-	// For MDS module
-	InitStep = 3;
 	Mds_initial(priv);
 
-	//=======================================
-	// Initialize the SME, SCAN, MLME, ROAM
-	//=======================================
-	InitStep = 4;
-	InitStep = 5;
-	InitStep = 6;
-
-	// If no user-defined address in the registry, use the addresss "burned" on the NIC instead.
+	/*
+	 * If no user-defined address in the registry, use the addresss
+	 * "burned" on the NIC instead.
+	 */
 	pMacAddr = priv->sLocalPara.ThisMacAddress;
 	pMacAddr2 = priv->sLocalPara.PermanentAddress;
-	hal_get_permanent_address( pHwData, priv->sLocalPara.PermanentAddress );// Reading ethernet address from EEPROM
+
+	/* Reading ethernet address from EEPROM */
+	hal_get_permanent_address(pHwData, priv->sLocalPara.PermanentAddress);
 	if (memcmp(pMacAddr, "\x00\x00\x00\x00\x00\x00", MAC_ADDR_LENGTH) == 0)
 		memcpy(pMacAddr, pMacAddr2, MAC_ADDR_LENGTH);
 	else {
-		// Set the user define MAC address
-		hal_set_ethernet_address(pHwData, priv->sLocalPara.ThisMacAddress);
+		/* Set the user define MAC address */
+		hal_set_ethernet_address(pHwData,
+					 priv->sLocalPara.ThisMacAddress);
 	}
 
-	//get current antenna
 	priv->sLocalPara.bAntennaNo = hal_get_antenna_number(pHwData);
 #ifdef _PE_STATE_DUMP_
 	printk("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo);
 #endif
-	hal_get_hw_radio_off( pHwData );
+	hal_get_hw_radio_off(pHwData);
 
-	// Waiting for HAL setting OK
+	/* Waiting for HAL setting OK */
 	while (!hal_idle(pHwData))
 		msleep(10);
 
 	MTO_Init(priv);
 
-	HwRadioOff = hal_get_hw_radio_off( pHwData );
+	HwRadioOff = hal_get_hw_radio_off(pHwData);
 	priv->sLocalPara.RadioOffStatus.boHwRadioOff = !!HwRadioOff;
 
-	hal_set_radio_mode( pHwData, (unsigned char)(priv->sLocalPara.RadioOffStatus.boSwRadioOff || priv->sLocalPara.RadioOffStatus.boHwRadioOff) );
+	hal_set_radio_mode(pHwData,
+			   (unsigned char)(priv->sLocalPara.RadioOffStatus.
+					   boSwRadioOff
+					   || priv->sLocalPara.RadioOffStatus.
+					   boHwRadioOff));
 
-	hal_driver_init_OK(pHwData) = 1; // Notify hal that the driver is ready now.
-	//set a tx power for reference.....
-//	sme_set_tx_power_level(priv, 12);	FIXME?
-	return true;
+	/* Notify hal that the driver is ready now. */
+	hal_driver_init_OK(pHwData) = 1;
 
 error:
-	switch (InitStep) {
-	case 5:
-	case 4:
-	case 3: Mds_Destroy( priv );
-	case 2:
-	case 1: hal_halt( pHwData, NULL );
-	case 0: break;
-	}
-
-	return false;
+	return err;
 }
 
-static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id_table)
+static int wb35_probe(struct usb_interface *intf,
+		      const struct usb_device_id *id_table)
 {
-	struct wb_usb *pWbUsb;
-        struct usb_host_interface *interface;
-	struct usb_endpoint_descriptor *endpoint;
-	u32	ltmp;
 	struct usb_device *udev = interface_to_usbdev(intf);
-	struct wbsoft_priv *priv;
+	struct usb_endpoint_descriptor *endpoint;
+	struct usb_host_interface *interface;
 	struct ieee80211_hw *dev;
+	struct wbsoft_priv *priv;
+	struct wb_usb *pWbUsb;
 	int nr, err;
+	u32 ltmp;
 
 	usb_get_dev(udev);
 
-	// 20060630.2 Check the device if it already be opened
-	nr = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ),
-			     0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN,
-			     0x0, 0x400, &ltmp, 4, HZ*100 );
+	/* Check the device if it already be opened */
+	nr = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+			     0x01,
+			     USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+			     0x0, 0x400, &ltmp, 4, HZ * 100);
 	if (nr < 0) {
 		err = nr;
 		goto error;
 	}
 
+	/* Is already initialized? */
 	ltmp = cpu_to_le32(ltmp);
-	if (ltmp) {  // Is already initialized?
+	if (ltmp) {
 		err = -EBUSY;
 		goto error;
 	}
@@ -351,23 +812,22 @@ static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id
 	pWbUsb = &priv->sHwData.WbUsb;
 	pWbUsb->udev = udev;
 
-        interface = intf->cur_altsetting;
-        endpoint = &interface->endpoint[0].desc;
+	interface = intf->cur_altsetting;
+	endpoint = &interface->endpoint[0].desc;
 
 	if (endpoint[2].wMaxPacketSize == 512) {
 		printk("[w35und] Working on USB 2.0\n");
 		pWbUsb->IsUsb20 = 1;
 	}
 
-	if (!wb35_hw_init(dev)) {
-		err = -EINVAL;
+	err = wb35_hw_init(dev);
+	if (err)
 		goto error_free_hw;
-	}
 
 	SET_IEEE80211_DEV(dev, &udev->dev);
 	{
-		struct hw_data * pHwData = &priv->sHwData;
-		unsigned char		dev_addr[MAX_ADDR_LEN];
+		struct hw_data *pHwData = &priv->sHwData;
+		unsigned char dev_addr[MAX_ADDR_LEN];
 		hal_get_permanent_address(pHwData, dev_addr);
 		SET_IEEE80211_PERM_ADDR(dev, dev_addr);
 	}
@@ -397,22 +857,31 @@ error:
 	return err;
 }
 
+static void hal_halt(struct hw_data *pHwData)
+{
+	del_timer_sync(&pHwData->LEDTimer);
+	/* XXX: Wait for Timer DPC exit. */
+	msleep(100);
+	Wb35Rx_destroy(pHwData);
+	Wb35Tx_destroy(pHwData);
+	Wb35Reg_destroy(pHwData);
+}
+
 static void wb35_hw_halt(struct wbsoft_priv *adapter)
 {
-	Mds_Destroy( adapter );
+	Mds_Destroy(adapter);
 
-	// Turn off Rx and Tx hardware ability
-	hal_stop( &adapter->sHwData );
+	/* Turn off Rx and Tx hardware ability */
+	hal_stop(&adapter->sHwData);
 #ifdef _PE_USB_INI_DUMP_
 	printk("[w35und] Hal_stop O.K.\n");
 #endif
-	msleep(100);// Waiting Irp completed
+	/* Waiting Irp completed */
+	msleep(100);
 
-	// Halt the HAL
-	hal_halt(&adapter->sHwData, NULL);
+	hal_halt(&adapter->sHwData);
 }
 
-
 static void wb35_disconnect(struct usb_interface *intf)
 {
 	struct ieee80211_hw *hw = usb_get_intfdata(intf);
diff --git a/drivers/staging/wlan-ng/README b/drivers/staging/wlan-ng/README
index 028c299b613..d0621f827c0 100644
--- a/drivers/staging/wlan-ng/README
+++ b/drivers/staging/wlan-ng/README
@@ -1,7 +1,6 @@
 TODO:
 	- checkpatch.pl cleanups
 	- sparse warnings
-	- Lindent cleanups
 	- move to use the in-kernel wireless stack
 
 Please send any patches or complaints about this driver to Greg
diff --git a/drivers/staging/wlan-ng/hfa384x.h b/drivers/staging/wlan-ng/hfa384x.h
index f3e87173471..46cce8159e5 100644
--- a/drivers/staging/wlan-ng/hfa384x.h
+++ b/drivers/staging/wlan-ng/hfa384x.h
@@ -63,8 +63,9 @@
 /*--- Mins & Maxs -----------------------------------*/
 #define		HFA384x_PORTID_MAX		((u16)7)
 #define		HFA384x_NUMPORTS_MAX		((u16)(HFA384x_PORTID_MAX+1))
-#define		HFA384x_PDR_LEN_MAX		((u16)512) /* in bytes, from EK */
-#define		HFA384x_PDA_LEN_MAX		((u16)1024) /* in bytes, from EK */
+#define		HFA384x_PDR_LEN_MAX		((u16)512)	/* in bytes, from EK */
+#define		HFA384x_PDA_RECS_MAX		((u16)200)	/* a guess */
+#define		HFA384x_PDA_LEN_MAX		((u16)1024)	/* in bytes, from EK */
 #define		HFA384x_SCANRESULT_MAX		((u16)31)
 #define		HFA384x_HSCANRESULT_MAX		((u16)31)
 #define		HFA384x_CHINFORESULT_MAX	((u16)16)
@@ -629,7 +630,7 @@ typedef struct hfa384x_ScanResultSub {
 typedef struct hfa384x_ScanResult {
 	u16 rsvd;
 	u16 scanreason;
-	 hfa384x_ScanResultSub_t result[HFA384x_SCANRESULT_MAX];
+	hfa384x_ScanResultSub_t result[HFA384x_SCANRESULT_MAX];
 } __attribute__ ((packed)) hfa384x_ScanResult_t;
 
 /*--  Inquiry Frame, Diagnose: ChInfo Results & Subfields--*/
@@ -645,7 +646,7 @@ typedef struct hfa384x_ChInfoResultSub {
 
 typedef struct hfa384x_ChInfoResult {
 	u16 scanchannels;
-	 hfa384x_ChInfoResultSub_t result[HFA384x_CHINFORESULT_MAX];
+	hfa384x_ChInfoResultSub_t result[HFA384x_CHINFORESULT_MAX];
 } __attribute__ ((packed)) hfa384x_ChInfoResult_t;
 
 /*--  Inquiry Frame, Diagnose: Host Scan Results & Subfields--*/
@@ -665,7 +666,7 @@ typedef struct hfa384x_HScanResultSub {
 typedef struct hfa384x_HScanResult {
 	u16 nresult;
 	u16 rsvd;
-	 hfa384x_HScanResultSub_t result[HFA384x_HSCANRESULT_MAX];
+	hfa384x_HScanResultSub_t result[HFA384x_HSCANRESULT_MAX];
 } __attribute__ ((packed)) hfa384x_HScanResult_t;
 
 /*--  Unsolicited Frame, MAC Mgmt: LinkStatus --*/
@@ -882,6 +883,213 @@ typedef union hfa384x_usbin {
 	u8 boguspad[3000];
 } __attribute__ ((packed)) hfa384x_usbin_t;
 
+/*--------------------------------------------------------------------
+PD record structures.
+--------------------------------------------------------------------*/
+
+typedef struct hfa384x_pdr_pcb_partnum {
+	u8 num[8];
+} __attribute__ ((packed)) hfa384x_pdr_pcb_partnum_t;
+
+typedef struct hfa384x_pdr_pcb_tracenum {
+	u8 num[8];
+} __attribute__ ((packed)) hfa384x_pdr_pcb_tracenum_t;
+
+typedef struct hfa384x_pdr_nic_serial {
+	u8 num[12];
+} __attribute__ ((packed)) hfa384x_pdr_nic_serial_t;
+
+typedef struct hfa384x_pdr_mkk_measurements {
+	double carrier_freq;
+	double occupied_band;
+	double power_density;
+	double tx_spur_f1;
+	double tx_spur_f2;
+	double tx_spur_f3;
+	double tx_spur_f4;
+	double tx_spur_l1;
+	double tx_spur_l2;
+	double tx_spur_l3;
+	double tx_spur_l4;
+	double rx_spur_f1;
+	double rx_spur_f2;
+	double rx_spur_l1;
+	double rx_spur_l2;
+} __attribute__ ((packed)) hfa384x_pdr_mkk_measurements_t;
+
+typedef struct hfa384x_pdr_nic_ramsize {
+	u8 size[12];		/* units of KB */
+} __attribute__ ((packed)) hfa384x_pdr_nic_ramsize_t;
+
+typedef struct hfa384x_pdr_mfisuprange {
+	u16 id;
+	u16 variant;
+	u16 bottom;
+	u16 top;
+} __attribute__ ((packed)) hfa384x_pdr_mfisuprange_t;
+
+typedef struct hfa384x_pdr_cfisuprange {
+	u16 id;
+	u16 variant;
+	u16 bottom;
+	u16 top;
+} __attribute__ ((packed)) hfa384x_pdr_cfisuprange_t;
+
+typedef struct hfa384x_pdr_nicid {
+	u16 id;
+	u16 variant;
+	u16 major;
+	u16 minor;
+} __attribute__ ((packed)) hfa384x_pdr_nicid_t;
+
+typedef struct hfa384x_pdr_refdac_measurements {
+	u16 value[0];
+} __attribute__ ((packed)) hfa384x_pdr_refdac_measurements_t;
+
+typedef struct hfa384x_pdr_vgdac_measurements {
+	u16 value[0];
+} __attribute__ ((packed)) hfa384x_pdr_vgdac_measurements_t;
+
+typedef struct hfa384x_pdr_level_comp_measurements {
+	u16 value[0];
+} __attribute__ ((packed)) hfa384x_pdr_level_compc_measurements_t;
+
+typedef struct hfa384x_pdr_mac_address {
+	u8 addr[6];
+} __attribute__ ((packed)) hfa384x_pdr_mac_address_t;
+
+typedef struct hfa384x_pdr_mkk_callname {
+	u8 callname[8];
+} __attribute__ ((packed)) hfa384x_pdr_mkk_callname_t;
+
+typedef struct hfa384x_pdr_regdomain {
+	u16 numdomains;
+	u16 domain[5];
+} __attribute__ ((packed)) hfa384x_pdr_regdomain_t;
+
+typedef struct hfa384x_pdr_allowed_channel {
+	u16 ch_bitmap;
+} __attribute__ ((packed)) hfa384x_pdr_allowed_channel_t;
+
+typedef struct hfa384x_pdr_default_channel {
+	u16 channel;
+} __attribute__ ((packed)) hfa384x_pdr_default_channel_t;
+
+typedef struct hfa384x_pdr_privacy_option {
+	u16 available;
+} __attribute__ ((packed)) hfa384x_pdr_privacy_option_t;
+
+typedef struct hfa384x_pdr_temptype {
+	u16 type;
+} __attribute__ ((packed)) hfa384x_pdr_temptype_t;
+
+typedef struct hfa384x_pdr_refdac_setup {
+	u16 ch_value[14];
+} __attribute__ ((packed)) hfa384x_pdr_refdac_setup_t;
+
+typedef struct hfa384x_pdr_vgdac_setup {
+	u16 ch_value[14];
+} __attribute__ ((packed)) hfa384x_pdr_vgdac_setup_t;
+
+typedef struct hfa384x_pdr_level_comp_setup {
+	u16 ch_value[14];
+} __attribute__ ((packed)) hfa384x_pdr_level_comp_setup_t;
+
+typedef struct hfa384x_pdr_trimdac_setup {
+	u16 trimidac;
+	u16 trimqdac;
+} __attribute__ ((packed)) hfa384x_pdr_trimdac_setup_t;
+
+typedef struct hfa384x_pdr_ifr_setting {
+	u16 value[3];
+} __attribute__ ((packed)) hfa384x_pdr_ifr_setting_t;
+
+typedef struct hfa384x_pdr_rfr_setting {
+	u16 value[3];
+} __attribute__ ((packed)) hfa384x_pdr_rfr_setting_t;
+
+typedef struct hfa384x_pdr_hfa3861_baseline {
+	u16 value[50];
+} __attribute__ ((packed)) hfa384x_pdr_hfa3861_baseline_t;
+
+typedef struct hfa384x_pdr_hfa3861_shadow {
+	u32 value[32];
+} __attribute__ ((packed)) hfa384x_pdr_hfa3861_shadow_t;
+
+typedef struct hfa384x_pdr_hfa3861_ifrf {
+	u32 value[20];
+} __attribute__ ((packed)) hfa384x_pdr_hfa3861_ifrf_t;
+
+typedef struct hfa384x_pdr_hfa3861_chcalsp {
+	u16 value[14];
+} __attribute__ ((packed)) hfa384x_pdr_hfa3861_chcalsp_t;
+
+typedef struct hfa384x_pdr_hfa3861_chcali {
+	u16 value[17];
+} __attribute__ ((packed)) hfa384x_pdr_hfa3861_chcali_t;
+
+typedef struct hfa384x_pdr_hfa3861_nic_config {
+	u16 config_bitmap;
+} __attribute__ ((packed)) hfa384x_pdr_nic_config_t;
+
+typedef struct hfa384x_pdr_hfo_delay {
+	u8 hfo_delay;
+} __attribute__ ((packed)) hfa384x_hfo_delay_t;
+
+typedef struct hfa384x_pdr_hfa3861_manf_testsp {
+	u16 value[30];
+} __attribute__ ((packed)) hfa384x_pdr_hfa3861_manf_testsp_t;
+
+typedef struct hfa384x_pdr_hfa3861_manf_testi {
+	u16 value[30];
+} __attribute__ ((packed)) hfa384x_pdr_hfa3861_manf_testi_t;
+
+typedef struct hfa384x_end_of_pda {
+	u16 crc;
+} __attribute__ ((packed)) hfa384x_pdr_end_of_pda_t;
+
+typedef struct hfa384x_pdrec {
+	u16 len;		/* in words */
+	u16 code;
+	union pdr {
+		hfa384x_pdr_pcb_partnum_t pcb_partnum;
+		hfa384x_pdr_pcb_tracenum_t pcb_tracenum;
+		hfa384x_pdr_nic_serial_t nic_serial;
+		hfa384x_pdr_mkk_measurements_t mkk_measurements;
+		hfa384x_pdr_nic_ramsize_t nic_ramsize;
+		hfa384x_pdr_mfisuprange_t mfisuprange;
+		hfa384x_pdr_cfisuprange_t cfisuprange;
+		hfa384x_pdr_nicid_t nicid;
+		hfa384x_pdr_refdac_measurements_t refdac_measurements;
+		hfa384x_pdr_vgdac_measurements_t vgdac_measurements;
+		hfa384x_pdr_level_compc_measurements_t level_compc_measurements;
+		hfa384x_pdr_mac_address_t mac_address;
+		hfa384x_pdr_mkk_callname_t mkk_callname;
+		hfa384x_pdr_regdomain_t regdomain;
+		hfa384x_pdr_allowed_channel_t allowed_channel;
+		hfa384x_pdr_default_channel_t default_channel;
+		hfa384x_pdr_privacy_option_t privacy_option;
+		hfa384x_pdr_temptype_t temptype;
+		hfa384x_pdr_refdac_setup_t refdac_setup;
+		hfa384x_pdr_vgdac_setup_t vgdac_setup;
+		hfa384x_pdr_level_comp_setup_t level_comp_setup;
+		hfa384x_pdr_trimdac_setup_t trimdac_setup;
+		hfa384x_pdr_ifr_setting_t ifr_setting;
+		hfa384x_pdr_rfr_setting_t rfr_setting;
+		hfa384x_pdr_hfa3861_baseline_t hfa3861_baseline;
+		hfa384x_pdr_hfa3861_shadow_t hfa3861_shadow;
+		hfa384x_pdr_hfa3861_ifrf_t hfa3861_ifrf;
+		hfa384x_pdr_hfa3861_chcalsp_t hfa3861_chcalsp;
+		hfa384x_pdr_hfa3861_chcali_t hfa3861_chcali;
+		hfa384x_pdr_nic_config_t nic_config;
+		hfa384x_hfo_delay_t hfo_delay;
+		hfa384x_pdr_hfa3861_manf_testsp_t hfa3861_manf_testsp;
+		hfa384x_pdr_hfa3861_manf_testi_t hfa3861_manf_testi;
+		hfa384x_pdr_end_of_pda_t end_of_pda;
+
+	} data;
+} __attribute__ ((packed)) hfa384x_pdrec_t;
+
 #ifdef __KERNEL__
 /*--------------------------------------------------------------------
 ---  MAC state structure, argument to all functions --
@@ -925,7 +1133,7 @@ struct hfa384x;
 
 typedef void (*ctlx_cmdcb_t) (struct hfa384x *, const struct hfa384x_usbctlx *);
 
-typedef void (*ctlx_usercb_t) (struct hfa384x *hw,
+typedef void (*ctlx_usercb_t) (struct hfa384x * hw,
 			       void *ctlxresult, void *usercb_data);
 
 typedef struct hfa384x_usbctlx {
@@ -1112,25 +1320,25 @@ typedef struct hfa384x {
 
 } hfa384x_t;
 
-void hfa384x_create(hfa384x_t *hw, struct usb_device *usb);
-void hfa384x_destroy(hfa384x_t *hw);
+void hfa384x_create(hfa384x_t * hw, struct usb_device *usb);
+void hfa384x_destroy(hfa384x_t * hw);
 
 int
-hfa384x_corereset(hfa384x_t *hw, int holdtime, int settletime, int genesis);
-int hfa384x_drvr_commtallies(hfa384x_t *hw);
-int hfa384x_drvr_disable(hfa384x_t *hw, u16 macport);
-int hfa384x_drvr_enable(hfa384x_t *hw, u16 macport);
-int hfa384x_drvr_flashdl_enable(hfa384x_t *hw);
-int hfa384x_drvr_flashdl_disable(hfa384x_t *hw);
-int hfa384x_drvr_flashdl_write(hfa384x_t *hw, u32 daddr, void *buf, u32 len);
-int hfa384x_drvr_getconfig(hfa384x_t *hw, u16 rid, void *buf, u16 len);
-int hfa384x_drvr_ramdl_enable(hfa384x_t *hw, u32 exeaddr);
-int hfa384x_drvr_ramdl_disable(hfa384x_t *hw);
-int hfa384x_drvr_ramdl_write(hfa384x_t *hw, u32 daddr, void *buf, u32 len);
-int hfa384x_drvr_readpda(hfa384x_t *hw, void *buf, unsigned int len);
-int hfa384x_drvr_setconfig(hfa384x_t *hw, u16 rid, void *buf, u16 len);
-
-static inline int hfa384x_drvr_getconfig16(hfa384x_t *hw, u16 rid, void *val)
+hfa384x_corereset(hfa384x_t * hw, int holdtime, int settletime, int genesis);
+int hfa384x_drvr_commtallies(hfa384x_t * hw);
+int hfa384x_drvr_disable(hfa384x_t * hw, u16 macport);
+int hfa384x_drvr_enable(hfa384x_t * hw, u16 macport);
+int hfa384x_drvr_flashdl_enable(hfa384x_t * hw);
+int hfa384x_drvr_flashdl_disable(hfa384x_t * hw);
+int hfa384x_drvr_flashdl_write(hfa384x_t * hw, u32 daddr, void *buf, u32 len);
+int hfa384x_drvr_getconfig(hfa384x_t * hw, u16 rid, void *buf, u16 len);
+int hfa384x_drvr_ramdl_enable(hfa384x_t * hw, u32 exeaddr);
+int hfa384x_drvr_ramdl_disable(hfa384x_t * hw);
+int hfa384x_drvr_ramdl_write(hfa384x_t * hw, u32 daddr, void *buf, u32 len);
+int hfa384x_drvr_readpda(hfa384x_t * hw, void *buf, unsigned int len);
+int hfa384x_drvr_setconfig(hfa384x_t * hw, u16 rid, void *buf, u16 len);
+
+static inline int hfa384x_drvr_getconfig16(hfa384x_t * hw, u16 rid, void *val)
 {
 	int result = 0;
 	result = hfa384x_drvr_getconfig(hw, rid, val, sizeof(u16));
@@ -1139,44 +1347,44 @@ static inline int hfa384x_drvr_getconfig16(hfa384x_t *hw, u16 rid, void *val)
 	return result;
 }
 
-static inline int hfa384x_drvr_setconfig16(hfa384x_t *hw, u16 rid, u16 val)
+static inline int hfa384x_drvr_setconfig16(hfa384x_t * hw, u16 rid, u16 val)
 {
 	u16 value = cpu_to_le16(val);
 	return hfa384x_drvr_setconfig(hw, rid, &value, sizeof(value));
 }
 
 int
-hfa384x_drvr_getconfig_async(hfa384x_t *hw,
+hfa384x_drvr_getconfig_async(hfa384x_t * hw,
 			     u16 rid, ctlx_usercb_t usercb, void *usercb_data);
 
 int
-hfa384x_drvr_setconfig_async(hfa384x_t *hw,
+hfa384x_drvr_setconfig_async(hfa384x_t * hw,
 			     u16 rid,
 			     void *buf,
 			     u16 len, ctlx_usercb_t usercb, void *usercb_data);
 
 static inline int
-hfa384x_drvr_setconfig16_async(hfa384x_t *hw, u16 rid, u16 val)
+hfa384x_drvr_setconfig16_async(hfa384x_t * hw, u16 rid, u16 val)
 {
 	u16 value = cpu_to_le16(val);
 	return hfa384x_drvr_setconfig_async(hw, rid, &value, sizeof(value),
 					    NULL, NULL);
 }
 
-int hfa384x_drvr_start(hfa384x_t *hw);
-int hfa384x_drvr_stop(hfa384x_t *hw);
+int hfa384x_drvr_start(hfa384x_t * hw);
+int hfa384x_drvr_stop(hfa384x_t * hw);
 int
-hfa384x_drvr_txframe(hfa384x_t *hw, struct sk_buff *skb,
-		     p80211_hdr_t *p80211_hdr, p80211_metawep_t *p80211_wep);
-void hfa384x_tx_timeout(wlandevice_t *wlandev);
-
-int hfa384x_cmd_initialize(hfa384x_t *hw);
-int hfa384x_cmd_enable(hfa384x_t *hw, u16 macport);
-int hfa384x_cmd_disable(hfa384x_t *hw, u16 macport);
-int hfa384x_cmd_allocate(hfa384x_t *hw, u16 len);
-int hfa384x_cmd_monitor(hfa384x_t *hw, u16 enable);
+hfa384x_drvr_txframe(hfa384x_t * hw, struct sk_buff *skb,
+		     p80211_hdr_t * p80211_hdr, p80211_metawep_t * p80211_wep);
+void hfa384x_tx_timeout(wlandevice_t * wlandev);
+
+int hfa384x_cmd_initialize(hfa384x_t * hw);
+int hfa384x_cmd_enable(hfa384x_t * hw, u16 macport);
+int hfa384x_cmd_disable(hfa384x_t * hw, u16 macport);
+int hfa384x_cmd_allocate(hfa384x_t * hw, u16 len);
+int hfa384x_cmd_monitor(hfa384x_t * hw, u16 enable);
 int
-hfa384x_cmd_download(hfa384x_t *hw,
+hfa384x_cmd_download(hfa384x_t * hw,
 		     u16 mode, u16 lowaddr, u16 highaddr, u16 codelen);
 
 #endif /* __KERNEL__ */
diff --git a/drivers/staging/wlan-ng/hfa384x_usb.c b/drivers/staging/wlan-ng/hfa384x_usb.c
index 824e65bdc43..51d9e520d52 100644
--- a/drivers/staging/wlan-ng/hfa384x_usb.c
+++ b/drivers/staging/wlan-ng/hfa384x_usb.c
@@ -110,8 +110,6 @@
 * --------------------------------------------------------------------
 */
 
-#include <linux/version.h>
-
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
@@ -162,13 +160,13 @@ static void dbprint_urb(struct urb *urb);
 #endif
 
 static void
-hfa384x_int_rxmonitor(wlandevice_t *wlandev, hfa384x_usb_rxfrm_t *rxfrm);
+hfa384x_int_rxmonitor(wlandevice_t * wlandev, hfa384x_usb_rxfrm_t * rxfrm);
 
 static void hfa384x_usb_defer(struct work_struct *data);
 
-static int submit_rx_urb(hfa384x_t *hw, gfp_t flags);
+static int submit_rx_urb(hfa384x_t * hw, gfp_t flags);
 
-static int submit_tx_urb(hfa384x_t *hw, struct urb *tx_urb, gfp_t flags);
+static int submit_tx_urb(hfa384x_t * hw, struct urb *tx_urb, gfp_t flags);
 
 /*---------------------------------------------------*/
 /* Callbacks */
@@ -177,22 +175,22 @@ static void hfa384x_ctlxout_callback(struct urb *urb);
 static void hfa384x_usbin_callback(struct urb *urb);
 
 static void
-hfa384x_usbin_txcompl(wlandevice_t *wlandev, hfa384x_usbin_t *usbin);
+hfa384x_usbin_txcompl(wlandevice_t * wlandev, hfa384x_usbin_t * usbin);
 
-static void hfa384x_usbin_rx(wlandevice_t *wlandev, struct sk_buff *skb);
+static void hfa384x_usbin_rx(wlandevice_t * wlandev, struct sk_buff *skb);
 
-static void hfa384x_usbin_info(wlandevice_t *wlandev, hfa384x_usbin_t *usbin);
+static void hfa384x_usbin_info(wlandevice_t * wlandev, hfa384x_usbin_t * usbin);
 
 static void
-hfa384x_usbout_tx(wlandevice_t *wlandev, hfa384x_usbout_t *usbout);
+hfa384x_usbout_tx(wlandevice_t * wlandev, hfa384x_usbout_t * usbout);
 
-static void hfa384x_usbin_ctlx(hfa384x_t *hw, hfa384x_usbin_t *usbin,
+static void hfa384x_usbin_ctlx(hfa384x_t * hw, hfa384x_usbin_t * usbin,
 			       int urb_status);
 
 /*---------------------------------------------------*/
 /* Functions to support the prism2 usb command queue */
 
-static void hfa384x_usbctlxq_run(hfa384x_t *hw);
+static void hfa384x_usbctlxq_run(hfa384x_t * hw);
 
 static void hfa384x_usbctlx_reqtimerfn(unsigned long data);
 
@@ -204,9 +202,9 @@ static void hfa384x_usbctlx_completion_task(unsigned long data);
 
 static void hfa384x_usbctlx_reaper_task(unsigned long data);
 
-static int hfa384x_usbctlx_submit(hfa384x_t *hw, hfa384x_usbctlx_t *ctlx);
+static int hfa384x_usbctlx_submit(hfa384x_t * hw, hfa384x_usbctlx_t * ctlx);
 
-static void unlocked_usbctlx_complete(hfa384x_t *hw, hfa384x_usbctlx_t *ctlx);
+static void unlocked_usbctlx_complete(hfa384x_t * hw, hfa384x_usbctlx_t * ctlx);
 
 struct usbctlx_completor {
 	int (*complete) (struct usbctlx_completor *);
@@ -214,35 +212,35 @@ struct usbctlx_completor {
 typedef struct usbctlx_completor usbctlx_completor_t;
 
 static int
-hfa384x_usbctlx_complete_sync(hfa384x_t *hw,
-			      hfa384x_usbctlx_t *ctlx,
-			      usbctlx_completor_t *completor);
+hfa384x_usbctlx_complete_sync(hfa384x_t * hw,
+			      hfa384x_usbctlx_t * ctlx,
+			      usbctlx_completor_t * completor);
 
 static int
-unlocked_usbctlx_cancel_async(hfa384x_t *hw, hfa384x_usbctlx_t *ctlx);
+unlocked_usbctlx_cancel_async(hfa384x_t * hw, hfa384x_usbctlx_t * ctlx);
 
-static void hfa384x_cb_status(hfa384x_t *hw, const hfa384x_usbctlx_t *ctlx);
+static void hfa384x_cb_status(hfa384x_t * hw, const hfa384x_usbctlx_t * ctlx);
 
-static void hfa384x_cb_rrid(hfa384x_t *hw, const hfa384x_usbctlx_t *ctlx);
+static void hfa384x_cb_rrid(hfa384x_t * hw, const hfa384x_usbctlx_t * ctlx);
 
 static int
-usbctlx_get_status(const hfa384x_usb_cmdresp_t *cmdresp,
-		   hfa384x_cmdresult_t *result);
+usbctlx_get_status(const hfa384x_usb_cmdresp_t * cmdresp,
+		   hfa384x_cmdresult_t * result);
 
 static void
-usbctlx_get_rridresult(const hfa384x_usb_rridresp_t *rridresp,
-		       hfa384x_rridresult_t *result);
+usbctlx_get_rridresult(const hfa384x_usb_rridresp_t * rridresp,
+		       hfa384x_rridresult_t * result);
 
 /*---------------------------------------------------*/
 /* Low level req/resp CTLX formatters and submitters */
 static int
-hfa384x_docmd(hfa384x_t *hw,
+hfa384x_docmd(hfa384x_t * hw,
 	      CMD_MODE mode,
-	      hfa384x_metacmd_t *cmd,
+	      hfa384x_metacmd_t * cmd,
 	      ctlx_cmdcb_t cmdcb, ctlx_usercb_t usercb, void *usercb_data);
 
 static int
-hfa384x_dorrid(hfa384x_t *hw,
+hfa384x_dorrid(hfa384x_t * hw,
 	       CMD_MODE mode,
 	       u16 rid,
 	       void *riddata,
@@ -250,7 +248,7 @@ hfa384x_dorrid(hfa384x_t *hw,
 	       ctlx_cmdcb_t cmdcb, ctlx_usercb_t usercb, void *usercb_data);
 
 static int
-hfa384x_dowrid(hfa384x_t *hw,
+hfa384x_dowrid(hfa384x_t * hw,
 	       CMD_MODE mode,
 	       u16 rid,
 	       void *riddata,
@@ -258,7 +256,7 @@ hfa384x_dowrid(hfa384x_t *hw,
 	       ctlx_cmdcb_t cmdcb, ctlx_usercb_t usercb, void *usercb_data);
 
 static int
-hfa384x_dormem(hfa384x_t *hw,
+hfa384x_dormem(hfa384x_t * hw,
 	       CMD_MODE mode,
 	       u16 page,
 	       u16 offset,
@@ -267,7 +265,7 @@ hfa384x_dormem(hfa384x_t *hw,
 	       ctlx_cmdcb_t cmdcb, ctlx_usercb_t usercb, void *usercb_data);
 
 static int
-hfa384x_dowmem(hfa384x_t *hw,
+hfa384x_dowmem(hfa384x_t * hw,
 	       CMD_MODE mode,
 	       u16 page,
 	       u16 offset,
@@ -292,7 +290,7 @@ static inline const char *ctlxstr(CTLX_STATE s)
 	return ctlx_str[s];
 };
 
-static inline hfa384x_usbctlx_t *get_active_ctlx(hfa384x_t *hw)
+static inline hfa384x_usbctlx_t *get_active_ctlx(hfa384x_t * hw)
 {
 	return list_entry(hw->ctlxq.active.next, hfa384x_usbctlx_t, list);
 }
@@ -304,21 +302,19 @@ void dbprint_urb(struct urb *urb)
 	pr_debug("urb->status=0x%08x\n", urb->status);
 	pr_debug("urb->transfer_flags=0x%08x\n", urb->transfer_flags);
 	pr_debug("urb->transfer_buffer=0x%08x\n",
-	       (unsigned int)urb->transfer_buffer);
+		 (unsigned int)urb->transfer_buffer);
 	pr_debug("urb->transfer_buffer_length=0x%08x\n",
-	       urb->transfer_buffer_length);
+		 urb->transfer_buffer_length);
 	pr_debug("urb->actual_length=0x%08x\n", urb->actual_length);
 	pr_debug("urb->bandwidth=0x%08x\n", urb->bandwidth);
 	pr_debug("urb->setup_packet(ctl)=0x%08x\n",
-	       (unsigned int)urb->setup_packet);
-	pr_debug("urb->start_frame(iso/irq)=0x%08x\n",
-	       urb->start_frame);
+		 (unsigned int)urb->setup_packet);
+	pr_debug("urb->start_frame(iso/irq)=0x%08x\n", urb->start_frame);
 	pr_debug("urb->interval(irq)=0x%08x\n", urb->interval);
 	pr_debug("urb->error_count(iso)=0x%08x\n", urb->error_count);
 	pr_debug("urb->timeout=0x%08x\n", urb->timeout);
 	pr_debug("urb->context=0x%08x\n", (unsigned int)urb->context);
-	pr_debug("urb->complete=0x%08x\n",
-	       (unsigned int)urb->complete);
+	pr_debug("urb->complete=0x%08x\n", (unsigned int)urb->complete);
 }
 #endif
 
@@ -338,7 +334,7 @@ void dbprint_urb(struct urb *urb)
 * Call context:
 *	Any
 ----------------------------------------------------------------*/
-static int submit_rx_urb(hfa384x_t *hw, gfp_t memflags)
+static int submit_rx_urb(hfa384x_t * hw, gfp_t memflags)
 {
 	struct sk_buff *skb;
 	int result;
@@ -399,7 +395,7 @@ done:
 * Call context:
 *	Any
 ----------------------------------------------------------------*/
-static int submit_tx_urb(hfa384x_t *hw, struct urb *tx_urb, gfp_t memflags)
+static int submit_tx_urb(hfa384x_t * hw, struct urb *tx_urb, gfp_t memflags)
 {
 	struct net_device *netdev = hw->wlandev->netdev;
 	int result;
@@ -536,7 +532,7 @@ static void hfa384x_usb_defer(struct work_struct *data)
 * Call context:
 *	process
 ----------------------------------------------------------------*/
-void hfa384x_create(hfa384x_t *hw, struct usb_device *usb)
+void hfa384x_create(hfa384x_t * hw, struct usb_device *usb)
 {
 	memset(hw, 0, sizeof(hfa384x_t));
 	hw->usb = usb;
@@ -612,7 +608,7 @@ void hfa384x_create(hfa384x_t *hw, struct usb_device *usb)
 * Call context:
 *	process
 ----------------------------------------------------------------*/
-void hfa384x_destroy(hfa384x_t *hw)
+void hfa384x_destroy(hfa384x_t * hw)
 {
 	struct sk_buff *skb;
 
@@ -634,7 +630,7 @@ static hfa384x_usbctlx_t *usbctlx_alloc(void)
 {
 	hfa384x_usbctlx_t *ctlx;
 
-	ctlx = kmalloc(sizeof(*ctlx), in_interrupt() ? GFP_ATOMIC : GFP_KERNEL);
+	ctlx = kmalloc(sizeof(*ctlx), in_interrupt()? GFP_ATOMIC : GFP_KERNEL);
 	if (ctlx != NULL) {
 		memset(ctlx, 0, sizeof(*ctlx));
 		init_completion(&ctlx->done);
@@ -644,8 +640,8 @@ static hfa384x_usbctlx_t *usbctlx_alloc(void)
 }
 
 static int
-usbctlx_get_status(const hfa384x_usb_cmdresp_t *cmdresp,
-		   hfa384x_cmdresult_t *result)
+usbctlx_get_status(const hfa384x_usb_cmdresp_t * cmdresp,
+		   hfa384x_cmdresult_t * result)
 {
 	result->status = le16_to_cpu(cmdresp->status);
 	result->resp0 = le16_to_cpu(cmdresp->resp0);
@@ -653,15 +649,15 @@ usbctlx_get_status(const hfa384x_usb_cmdresp_t *cmdresp,
 	result->resp2 = le16_to_cpu(cmdresp->resp2);
 
 	pr_debug("cmdresult:status=0x%04x "
-	       "resp0=0x%04x resp1=0x%04x resp2=0x%04x\n",
-	       result->status, result->resp0, result->resp1, result->resp2);
+		 "resp0=0x%04x resp1=0x%04x resp2=0x%04x\n",
+		 result->status, result->resp0, result->resp1, result->resp2);
 
 	return result->status & HFA384x_STATUS_RESULT;
 }
 
 static void
-usbctlx_get_rridresult(const hfa384x_usb_rridresp_t *rridresp,
-		       hfa384x_rridresult_t *result)
+usbctlx_get_rridresult(const hfa384x_usb_rridresp_t * rridresp,
+		       hfa384x_rridresult_t * result)
 {
 	result->rid = le16_to_cpu(rridresp->rid);
 	result->riddata = rridresp->data;
@@ -682,7 +678,7 @@ struct usbctlx_cmd_completor {
 };
 typedef struct usbctlx_cmd_completor usbctlx_cmd_completor_t;
 
-static int usbctlx_cmd_completor_fn(usbctlx_completor_t *head)
+static int usbctlx_cmd_completor_fn(usbctlx_completor_t * head)
 {
 	usbctlx_cmd_completor_t *complete = (usbctlx_cmd_completor_t *) head;
 	return usbctlx_get_status(complete->cmdresp, complete->result);
@@ -716,7 +712,7 @@ struct usbctlx_rrid_completor {
 };
 typedef struct usbctlx_rrid_completor usbctlx_rrid_completor_t;
 
-static int usbctlx_rrid_completor_fn(usbctlx_completor_t *head)
+static int usbctlx_rrid_completor_fn(usbctlx_completor_t * head)
 {
 	usbctlx_rrid_completor_t *complete = (usbctlx_rrid_completor_t *) head;
 	hfa384x_rridresult_t rridresult;
@@ -737,7 +733,7 @@ static int usbctlx_rrid_completor_fn(usbctlx_completor_t *head)
 }
 
 static inline usbctlx_completor_t *init_rrid_completor(usbctlx_rrid_completor_t
-						       *completor,
+						       * completor,
 						       const
 						       hfa384x_usb_rridresp_t *
 						       rridresp, void *riddata,
@@ -777,7 +773,7 @@ struct usbctlx_rmem_completor {
 };
 typedef struct usbctlx_rmem_completor usbctlx_rmem_completor_t;
 
-static int usbctlx_rmem_completor_fn(usbctlx_completor_t *head)
+static int usbctlx_rmem_completor_fn(usbctlx_completor_t * head)
 {
 	usbctlx_rmem_completor_t *complete = (usbctlx_rmem_completor_t *) head;
 
@@ -787,9 +783,9 @@ static int usbctlx_rmem_completor_fn(usbctlx_completor_t *head)
 }
 
 static inline usbctlx_completor_t *init_rmem_completor(usbctlx_rmem_completor_t
-						       *completor,
+						       * completor,
 						       hfa384x_usb_rmemresp_t
-                                                       *rmemresp, void *data,
+						       * rmemresp, void *data,
 						       unsigned int len)
 {
 	completor->head.complete = usbctlx_rmem_completor_fn;
@@ -820,7 +816,7 @@ static inline usbctlx_completor_t *init_rmem_completor(usbctlx_rmem_completor_t
 * Call context:
 *	interrupt
 ----------------------------------------------------------------*/
-static void hfa384x_cb_status(hfa384x_t *hw, const hfa384x_usbctlx_t *ctlx)
+static void hfa384x_cb_status(hfa384x_t * hw, const hfa384x_usbctlx_t * ctlx)
 {
 	if (ctlx->usercb != NULL) {
 		hfa384x_cmdresult_t cmdresult;
@@ -857,15 +853,14 @@ static void hfa384x_cb_status(hfa384x_t *hw, const hfa384x_usbctlx_t *ctlx)
 * Call context:
 *	interrupt
 ----------------------------------------------------------------*/
-static void hfa384x_cb_rrid(hfa384x_t *hw, const hfa384x_usbctlx_t *ctlx)
+static void hfa384x_cb_rrid(hfa384x_t * hw, const hfa384x_usbctlx_t * ctlx)
 {
 	if (ctlx->usercb != NULL) {
 		hfa384x_rridresult_t rridresult;
 
 		if (ctlx->state != CTLX_COMPLETE) {
 			memset(&rridresult, 0, sizeof(rridresult));
-			rridresult.rid =
-			    le16_to_cpu(ctlx->outbuf.rridreq.rid);
+			rridresult.rid = le16_to_cpu(ctlx->outbuf.rridreq.rid);
 		} else {
 			usbctlx_get_rridresult(&ctlx->inbuf.rridresp,
 					       &rridresult);
@@ -875,21 +870,21 @@ static void hfa384x_cb_rrid(hfa384x_t *hw, const hfa384x_usbctlx_t *ctlx)
 	}
 }
 
-static inline int hfa384x_docmd_wait(hfa384x_t *hw, hfa384x_metacmd_t *cmd)
+static inline int hfa384x_docmd_wait(hfa384x_t * hw, hfa384x_metacmd_t * cmd)
 {
 	return hfa384x_docmd(hw, DOWAIT, cmd, NULL, NULL, NULL);
 }
 
 static inline int
-hfa384x_docmd_async(hfa384x_t *hw,
-		    hfa384x_metacmd_t *cmd,
+hfa384x_docmd_async(hfa384x_t * hw,
+		    hfa384x_metacmd_t * cmd,
 		    ctlx_cmdcb_t cmdcb, ctlx_usercb_t usercb, void *usercb_data)
 {
 	return hfa384x_docmd(hw, DOASYNC, cmd, cmdcb, usercb, usercb_data);
 }
 
 static inline int
-hfa384x_dorrid_wait(hfa384x_t *hw, u16 rid, void *riddata,
+hfa384x_dorrid_wait(hfa384x_t * hw, u16 rid, void *riddata,
 		    unsigned int riddatalen)
 {
 	return hfa384x_dorrid(hw, DOWAIT,
@@ -897,7 +892,7 @@ hfa384x_dorrid_wait(hfa384x_t *hw, u16 rid, void *riddata,
 }
 
 static inline int
-hfa384x_dorrid_async(hfa384x_t *hw,
+hfa384x_dorrid_async(hfa384x_t * hw,
 		     u16 rid, void *riddata, unsigned int riddatalen,
 		     ctlx_cmdcb_t cmdcb,
 		     ctlx_usercb_t usercb, void *usercb_data)
@@ -908,7 +903,7 @@ hfa384x_dorrid_async(hfa384x_t *hw,
 }
 
 static inline int
-hfa384x_dowrid_wait(hfa384x_t *hw, u16 rid, void *riddata,
+hfa384x_dowrid_wait(hfa384x_t * hw, u16 rid, void *riddata,
 		    unsigned int riddatalen)
 {
 	return hfa384x_dowrid(hw, DOWAIT,
@@ -916,7 +911,7 @@ hfa384x_dowrid_wait(hfa384x_t *hw, u16 rid, void *riddata,
 }
 
 static inline int
-hfa384x_dowrid_async(hfa384x_t *hw,
+hfa384x_dowrid_async(hfa384x_t * hw,
 		     u16 rid, void *riddata, unsigned int riddatalen,
 		     ctlx_cmdcb_t cmdcb,
 		     ctlx_usercb_t usercb, void *usercb_data)
@@ -927,7 +922,7 @@ hfa384x_dowrid_async(hfa384x_t *hw,
 }
 
 static inline int
-hfa384x_dormem_wait(hfa384x_t *hw,
+hfa384x_dormem_wait(hfa384x_t * hw,
 		    u16 page, u16 offset, void *data, unsigned int len)
 {
 	return hfa384x_dormem(hw, DOWAIT,
@@ -935,7 +930,7 @@ hfa384x_dormem_wait(hfa384x_t *hw,
 }
 
 static inline int
-hfa384x_dormem_async(hfa384x_t *hw,
+hfa384x_dormem_async(hfa384x_t * hw,
 		     u16 page, u16 offset, void *data, unsigned int len,
 		     ctlx_cmdcb_t cmdcb,
 		     ctlx_usercb_t usercb, void *usercb_data)
@@ -946,7 +941,7 @@ hfa384x_dormem_async(hfa384x_t *hw,
 }
 
 static inline int
-hfa384x_dowmem_wait(hfa384x_t *hw,
+hfa384x_dowmem_wait(hfa384x_t * hw,
 		    u16 page, u16 offset, void *data, unsigned int len)
 {
 	return hfa384x_dowmem(hw, DOWAIT,
@@ -954,7 +949,7 @@ hfa384x_dowmem_wait(hfa384x_t *hw,
 }
 
 static inline int
-hfa384x_dowmem_async(hfa384x_t *hw,
+hfa384x_dowmem_async(hfa384x_t * hw,
 		     u16 page,
 		     u16 offset,
 		     void *data,
@@ -986,7 +981,7 @@ hfa384x_dowmem_async(hfa384x_t *hw,
 * Call context:
 *	process
 ----------------------------------------------------------------*/
-int hfa384x_cmd_initialize(hfa384x_t *hw)
+int hfa384x_cmd_initialize(hfa384x_t * hw)
 {
 	int result = 0;
 	int i;
@@ -1000,10 +995,10 @@ int hfa384x_cmd_initialize(hfa384x_t *hw)
 	result = hfa384x_docmd_wait(hw, &cmd);
 
 	pr_debug("cmdresp.init: "
-	       "status=0x%04x, resp0=0x%04x, "
-	       "resp1=0x%04x, resp2=0x%04x\n",
-	       cmd.result.status,
-	       cmd.result.resp0, cmd.result.resp1, cmd.result.resp2);
+		 "status=0x%04x, resp0=0x%04x, "
+		 "resp1=0x%04x, resp2=0x%04x\n",
+		 cmd.result.status,
+		 cmd.result.resp0, cmd.result.resp1, cmd.result.resp2);
 	if (result == 0) {
 		for (i = 0; i < HFA384x_NUMPORTS_MAX; i++)
 			hw->port_enabled[i] = 0;
@@ -1034,7 +1029,7 @@ int hfa384x_cmd_initialize(hfa384x_t *hw)
 * Call context:
 *	process
 ----------------------------------------------------------------*/
-int hfa384x_cmd_disable(hfa384x_t *hw, u16 macport)
+int hfa384x_cmd_disable(hfa384x_t * hw, u16 macport)
 {
 	int result = 0;
 	hfa384x_metacmd_t cmd;
@@ -1070,7 +1065,7 @@ int hfa384x_cmd_disable(hfa384x_t *hw, u16 macport)
 * Call context:
 *	process
 ----------------------------------------------------------------*/
-int hfa384x_cmd_enable(hfa384x_t *hw, u16 macport)
+int hfa384x_cmd_enable(hfa384x_t * hw, u16 macport)
 {
 	int result = 0;
 	hfa384x_metacmd_t cmd;
@@ -1115,7 +1110,7 @@ int hfa384x_cmd_enable(hfa384x_t *hw, u16 macport)
 * Call context:
 *	process
 ----------------------------------------------------------------*/
-int hfa384x_cmd_monitor(hfa384x_t *hw, u16 enable)
+int hfa384x_cmd_monitor(hfa384x_t * hw, u16 enable)
 {
 	int result = 0;
 	hfa384x_metacmd_t cmd;
@@ -1169,15 +1164,14 @@ int hfa384x_cmd_monitor(hfa384x_t *hw, u16 enable)
 * Call context:
 *	process
 ----------------------------------------------------------------*/
-int hfa384x_cmd_download(hfa384x_t *hw, u16 mode, u16 lowaddr,
+int hfa384x_cmd_download(hfa384x_t * hw, u16 mode, u16 lowaddr,
 			 u16 highaddr, u16 codelen)
 {
 	int result = 0;
 	hfa384x_metacmd_t cmd;
 
-	printk(KERN_DEBUG
-	       "mode=%d, lowaddr=0x%04x, highaddr=0x%04x, codelen=%d\n",
-	       mode, lowaddr, highaddr, codelen);
+	pr_debug("mode=%d, lowaddr=0x%04x, highaddr=0x%04x, codelen=%d\n",
+		 mode, lowaddr, highaddr, codelen);
 
 	cmd.cmd = (HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_DOWNLD) |
 		   HFA384x_CMD_PROGMODE_SET(mode));
@@ -1214,7 +1208,7 @@ int hfa384x_cmd_download(hfa384x_t *hw, u16 mode, u16 lowaddr,
 * Call context:
 *	process
 ----------------------------------------------------------------*/
-int hfa384x_corereset(hfa384x_t *hw, int holdtime, int settletime, int genesis)
+int hfa384x_corereset(hfa384x_t * hw, int holdtime, int settletime, int genesis)
 {
 	int result = 0;
 
@@ -1251,9 +1245,9 @@ int hfa384x_corereset(hfa384x_t *hw, int holdtime, int settletime, int genesis)
 * Call context:
 *	process
 ----------------------------------------------------------------*/
-static int hfa384x_usbctlx_complete_sync(hfa384x_t *hw,
-					 hfa384x_usbctlx_t *ctlx,
-					 usbctlx_completor_t *completor)
+static int hfa384x_usbctlx_complete_sync(hfa384x_t * hw,
+					 hfa384x_usbctlx_t * ctlx,
+					 usbctlx_completor_t * completor)
 {
 	unsigned long flags;
 	int result;
@@ -1367,9 +1361,9 @@ cleanup:
 *	process
 ----------------------------------------------------------------*/
 static int
-hfa384x_docmd(hfa384x_t *hw,
+hfa384x_docmd(hfa384x_t * hw,
 	      CMD_MODE mode,
-	      hfa384x_metacmd_t *cmd,
+	      hfa384x_metacmd_t * cmd,
 	      ctlx_cmdcb_t cmdcb, ctlx_usercb_t usercb, void *usercb_data)
 {
 	int result;
@@ -1391,8 +1385,8 @@ hfa384x_docmd(hfa384x_t *hw,
 	ctlx->outbufsize = sizeof(ctlx->outbuf.cmdreq);
 
 	pr_debug("cmdreq: cmd=0x%04x "
-	       "parm0=0x%04x parm1=0x%04x parm2=0x%04x\n",
-	       cmd->cmd, cmd->parm0, cmd->parm1, cmd->parm2);
+		 "parm0=0x%04x parm1=0x%04x parm2=0x%04x\n",
+		 cmd->cmd, cmd->parm0, cmd->parm1, cmd->parm2);
 
 	ctlx->reapable = mode;
 	ctlx->cmdcb = cmdcb;
@@ -1456,7 +1450,7 @@ done:
 *	process (DOWAIT or DOASYNC)
 ----------------------------------------------------------------*/
 static int
-hfa384x_dorrid(hfa384x_t *hw,
+hfa384x_dorrid(hfa384x_t * hw,
 	       CMD_MODE mode,
 	       u16 rid,
 	       void *riddata,
@@ -1537,7 +1531,7 @@ done:
 *	process (DOWAIT or DOASYNC)
 ----------------------------------------------------------------*/
 static int
-hfa384x_dowrid(hfa384x_t *hw,
+hfa384x_dowrid(hfa384x_t * hw,
 	       CMD_MODE mode,
 	       u16 rid,
 	       void *riddata,
@@ -1556,9 +1550,8 @@ hfa384x_dowrid(hfa384x_t *hw,
 	/* Initialize the command */
 	ctlx->outbuf.wridreq.type = cpu_to_le16(HFA384x_USB_WRIDREQ);
 	ctlx->outbuf.wridreq.frmlen = cpu_to_le16((sizeof
-						       (ctlx->outbuf.wridreq.
-							rid) + riddatalen +
-						       1) / 2);
+						   (ctlx->outbuf.wridreq.rid) +
+						   riddatalen + 1) / 2);
 	ctlx->outbuf.wridreq.rid = cpu_to_le16(rid);
 	memcpy(ctlx->outbuf.wridreq.data, riddata, riddatalen);
 
@@ -1625,7 +1618,7 @@ done:
 *	process (DOWAIT or DOASYNC)
 ----------------------------------------------------------------*/
 static int
-hfa384x_dormem(hfa384x_t *hw,
+hfa384x_dormem(hfa384x_t * hw,
 	       CMD_MODE mode,
 	       u16 page,
 	       u16 offset,
@@ -1646,20 +1639,18 @@ hfa384x_dormem(hfa384x_t *hw,
 	ctlx->outbuf.rmemreq.type = cpu_to_le16(HFA384x_USB_RMEMREQ);
 	ctlx->outbuf.rmemreq.frmlen =
 	    cpu_to_le16(sizeof(ctlx->outbuf.rmemreq.offset) +
-			    sizeof(ctlx->outbuf.rmemreq.page) + len);
+			sizeof(ctlx->outbuf.rmemreq.page) + len);
 	ctlx->outbuf.rmemreq.offset = cpu_to_le16(offset);
 	ctlx->outbuf.rmemreq.page = cpu_to_le16(page);
 
 	ctlx->outbufsize = sizeof(ctlx->outbuf.rmemreq);
 
-	printk(KERN_DEBUG
-	       "type=0x%04x frmlen=%d offset=0x%04x page=0x%04x\n",
-	       ctlx->outbuf.rmemreq.type,
-	       ctlx->outbuf.rmemreq.frmlen,
-	       ctlx->outbuf.rmemreq.offset, ctlx->outbuf.rmemreq.page);
+	pr_debug("type=0x%04x frmlen=%d offset=0x%04x page=0x%04x\n",
+		 ctlx->outbuf.rmemreq.type,
+		 ctlx->outbuf.rmemreq.frmlen,
+		 ctlx->outbuf.rmemreq.offset, ctlx->outbuf.rmemreq.page);
 
-	pr_debug("pktsize=%zd\n",
-	       ROUNDUP64(sizeof(ctlx->outbuf.rmemreq)));
+	pr_debug("pktsize=%zd\n", ROUNDUP64(sizeof(ctlx->outbuf.rmemreq)));
 
 	ctlx->reapable = mode;
 	ctlx->cmdcb = cmdcb;
@@ -1718,7 +1709,7 @@ done:
 *	process (DOWAIT or DOASYNC)
 ----------------------------------------------------------------*/
 static int
-hfa384x_dowmem(hfa384x_t *hw,
+hfa384x_dowmem(hfa384x_t * hw,
 	       CMD_MODE mode,
 	       u16 page,
 	       u16 offset,
@@ -1729,8 +1720,7 @@ hfa384x_dowmem(hfa384x_t *hw,
 	int result;
 	hfa384x_usbctlx_t *ctlx;
 
-	pr_debug("page=0x%04x offset=0x%04x len=%d\n",
-	       page, offset, len);
+	pr_debug("page=0x%04x offset=0x%04x len=%d\n", page, offset, len);
 
 	ctlx = usbctlx_alloc();
 	if (ctlx == NULL) {
@@ -1742,7 +1732,7 @@ hfa384x_dowmem(hfa384x_t *hw,
 	ctlx->outbuf.wmemreq.type = cpu_to_le16(HFA384x_USB_WMEMREQ);
 	ctlx->outbuf.wmemreq.frmlen =
 	    cpu_to_le16(sizeof(ctlx->outbuf.wmemreq.offset) +
-			    sizeof(ctlx->outbuf.wmemreq.page) + len);
+			sizeof(ctlx->outbuf.wmemreq.page) + len);
 	ctlx->outbuf.wmemreq.offset = cpu_to_le16(offset);
 	ctlx->outbuf.wmemreq.page = cpu_to_le16(page);
 	memcpy(ctlx->outbuf.wmemreq.data, data, len);
@@ -1793,7 +1783,7 @@ done:
 * Call context:
 *	process
 ----------------------------------------------------------------*/
-int hfa384x_drvr_commtallies(hfa384x_t *hw)
+int hfa384x_drvr_commtallies(hfa384x_t * hw)
 {
 	hfa384x_metacmd_t cmd;
 
@@ -1829,7 +1819,7 @@ int hfa384x_drvr_commtallies(hfa384x_t *hw)
 * Call context:
 *	process
 ----------------------------------------------------------------*/
-int hfa384x_drvr_disable(hfa384x_t *hw, u16 macport)
+int hfa384x_drvr_disable(hfa384x_t * hw, u16 macport)
 {
 	int result = 0;
 
@@ -1867,7 +1857,7 @@ int hfa384x_drvr_disable(hfa384x_t *hw, u16 macport)
 * Call context:
 *	process
 ----------------------------------------------------------------*/
-int hfa384x_drvr_enable(hfa384x_t *hw, u16 macport)
+int hfa384x_drvr_enable(hfa384x_t * hw, u16 macport)
 {
 	int result = 0;
 
@@ -1904,7 +1894,7 @@ int hfa384x_drvr_enable(hfa384x_t *hw, u16 macport)
 * Call context:
 *	process
 ----------------------------------------------------------------*/
-int hfa384x_drvr_flashdl_enable(hfa384x_t *hw)
+int hfa384x_drvr_flashdl_enable(hfa384x_t * hw)
 {
 	int result = 0;
 	int i;
@@ -1962,7 +1952,7 @@ int hfa384x_drvr_flashdl_enable(hfa384x_t *hw)
 * Call context:
 *	process
 ----------------------------------------------------------------*/
-int hfa384x_drvr_flashdl_disable(hfa384x_t *hw)
+int hfa384x_drvr_flashdl_disable(hfa384x_t * hw)
 {
 	/* Check that we're already in the download state */
 	if (hw->dlstate != HFA384x_DLSTATE_FLASHENABLED)
@@ -2007,7 +1997,7 @@ int hfa384x_drvr_flashdl_disable(hfa384x_t *hw)
 * Call context:
 *	process
 ----------------------------------------------------------------*/
-int hfa384x_drvr_flashdl_write(hfa384x_t *hw, u32 daddr, void *buf, u32 len)
+int hfa384x_drvr_flashdl_write(hfa384x_t * hw, u32 daddr, void *buf, u32 len)
 {
 	int result = 0;
 	u32 dlbufaddr;
@@ -2036,9 +2026,8 @@ int hfa384x_drvr_flashdl_write(hfa384x_t *hw, u32 daddr, void *buf, u32 len)
 	/* NOTE: dlbuffer RID stores the address in AUX format */
 	dlbufaddr =
 	    HFA384x_ADDR_AUX_MKFLAT(hw->bufinfo.page, hw->bufinfo.offset);
-	printk(KERN_DEBUG
-	       "dlbuf.page=0x%04x dlbuf.offset=0x%04x dlbufaddr=0x%08x\n",
-	       hw->bufinfo.page, hw->bufinfo.offset, dlbufaddr);
+	pr_debug("dlbuf.page=0x%04x dlbuf.offset=0x%04x dlbufaddr=0x%08x\n",
+		 hw->bufinfo.page, hw->bufinfo.offset, dlbufaddr);
 
 #if 0
 	printk(KERN_WARNING "dlbuf@0x%06lx len=%d to=%d\n", dlbufaddr,
@@ -2154,7 +2143,7 @@ exit_proc:
 * Call context:
 *	process
 ----------------------------------------------------------------*/
-int hfa384x_drvr_getconfig(hfa384x_t *hw, u16 rid, void *buf, u16 len)
+int hfa384x_drvr_getconfig(hfa384x_t * hw, u16 rid, void *buf, u16 len)
 {
 	int result;
 
@@ -2191,7 +2180,7 @@ int hfa384x_drvr_getconfig(hfa384x_t *hw, u16 rid, void *buf, u16 len)
  *       Any
  ----------------------------------------------------------------*/
 int
-hfa384x_drvr_getconfig_async(hfa384x_t *hw,
+hfa384x_drvr_getconfig_async(hfa384x_t * hw,
 			     u16 rid, ctlx_usercb_t usercb, void *usercb_data)
 {
 	return hfa384x_dorrid_async(hw, rid, NULL, 0,
@@ -2222,7 +2211,7 @@ hfa384x_drvr_getconfig_async(hfa384x_t *hw,
  *       process
  ----------------------------------------------------------------*/
 int
-hfa384x_drvr_setconfig_async(hfa384x_t *hw,
+hfa384x_drvr_setconfig_async(hfa384x_t * hw,
 			     u16 rid,
 			     void *buf,
 			     u16 len, ctlx_usercb_t usercb, void *usercb_data)
@@ -2249,7 +2238,7 @@ hfa384x_drvr_setconfig_async(hfa384x_t *hw,
 * Call context:
 *	process
 ----------------------------------------------------------------*/
-int hfa384x_drvr_ramdl_disable(hfa384x_t *hw)
+int hfa384x_drvr_ramdl_disable(hfa384x_t * hw)
 {
 	/* Check that we're already in the download state */
 	if (hw->dlstate != HFA384x_DLSTATE_RAMENABLED)
@@ -2289,7 +2278,7 @@ int hfa384x_drvr_ramdl_disable(hfa384x_t *hw)
 * Call context:
 *	process
 ----------------------------------------------------------------*/
-int hfa384x_drvr_ramdl_enable(hfa384x_t *hw, u32 exeaddr)
+int hfa384x_drvr_ramdl_enable(hfa384x_t * hw, u32 exeaddr)
 {
 	int result = 0;
 	u16 lowaddr;
@@ -2324,9 +2313,8 @@ int hfa384x_drvr_ramdl_enable(hfa384x_t *hw, u32 exeaddr)
 		/* Set the download state */
 		hw->dlstate = HFA384x_DLSTATE_RAMENABLED;
 	} else {
-		printk(KERN_DEBUG
-		       "cmd_download(0x%04x, 0x%04x) failed, result=%d.\n",
-		       lowaddr, hiaddr, result);
+		pr_debug("cmd_download(0x%04x, 0x%04x) failed, result=%d.\n",
+			 lowaddr, hiaddr, result);
 	}
 
 	return result;
@@ -2358,7 +2346,7 @@ int hfa384x_drvr_ramdl_enable(hfa384x_t *hw, u32 exeaddr)
 * Call context:
 *	process
 ----------------------------------------------------------------*/
-int hfa384x_drvr_ramdl_write(hfa384x_t *hw, u32 daddr, void *buf, u32 len)
+int hfa384x_drvr_ramdl_write(hfa384x_t * hw, u32 daddr, void *buf, u32 len)
 {
 	int result = 0;
 	int nwrites;
@@ -2437,7 +2425,7 @@ int hfa384x_drvr_ramdl_write(hfa384x_t *hw, u32 daddr, void *buf, u32 len)
 * Call context:
 *	process or non-card interrupt.
 ----------------------------------------------------------------*/
-int hfa384x_drvr_readpda(hfa384x_t *hw, void *buf, unsigned int len)
+int hfa384x_drvr_readpda(hfa384x_t * hw, void *buf, unsigned int len)
 {
 	int result = 0;
 	u16 *pda = buf;
@@ -2543,7 +2531,7 @@ int hfa384x_drvr_readpda(hfa384x_t *hw, void *buf, unsigned int len)
 * Call context:
 *	process
 ----------------------------------------------------------------*/
-int hfa384x_drvr_setconfig(hfa384x_t *hw, u16 rid, void *buf, u16 len)
+int hfa384x_drvr_setconfig(hfa384x_t * hw, u16 rid, void *buf, u16 len)
 {
 	return hfa384x_dowrid_wait(hw, rid, buf, len);
 }
@@ -2568,7 +2556,7 @@ int hfa384x_drvr_setconfig(hfa384x_t *hw, u16 rid, void *buf, u16 len)
 *	process
 ----------------------------------------------------------------*/
 
-int hfa384x_drvr_start(hfa384x_t *hw)
+int hfa384x_drvr_start(hfa384x_t * hw)
 {
 	int result, result1, result2;
 	u16 status;
@@ -2630,11 +2618,10 @@ int hfa384x_drvr_start(hfa384x_t *hw)
 			usb_kill_urb(&hw->rx_urb);
 			goto done;
 		} else {
-			printk(KERN_DEBUG
-			       "First cmd_initialize() failed (result %d),\n",
-			       result1);
-			printk(KERN_DEBUG
-			       "but second attempt succeeded. All should be ok\n");
+			pr_debug("First cmd_initialize() failed (result %d),\n",
+				 result1);
+			pr_debug
+			    ("but second attempt succeeded. All should be ok\n");
 		}
 	} else if (result2 != 0) {
 		printk(KERN_WARNING
@@ -2670,7 +2657,7 @@ done:
 * Call context:
 *	process
 ----------------------------------------------------------------*/
-int hfa384x_drvr_stop(hfa384x_t *hw)
+int hfa384x_drvr_stop(hfa384x_t * hw)
 {
 	int result = 0;
 	int i;
@@ -2721,9 +2708,9 @@ int hfa384x_drvr_stop(hfa384x_t *hw)
 * Call context:
 *	interrupt
 ----------------------------------------------------------------*/
-int hfa384x_drvr_txframe(hfa384x_t *hw, struct sk_buff *skb,
-			 p80211_hdr_t *p80211_hdr,
-			 p80211_metawep_t *p80211_wep)
+int hfa384x_drvr_txframe(hfa384x_t * hw, struct sk_buff *skb,
+			 p80211_hdr_t * p80211_hdr,
+			 p80211_metawep_t * p80211_wep)
 {
 	int usbpktlen = sizeof(hfa384x_tx_frame_t);
 	int result;
@@ -2814,7 +2801,7 @@ exit:
 	return result;
 }
 
-void hfa384x_tx_timeout(wlandevice_t *wlandev)
+void hfa384x_tx_timeout(wlandevice_t * wlandev)
 {
 	hfa384x_t *hw = wlandev->priv;
 	unsigned long flags;
@@ -2963,8 +2950,8 @@ static void hfa384x_usbctlx_completion_task(unsigned long data)
 * Call context:
 *	Either process or interrupt, but presumably interrupt
 ----------------------------------------------------------------*/
-static int unlocked_usbctlx_cancel_async(hfa384x_t *hw,
-					 hfa384x_usbctlx_t *ctlx)
+static int unlocked_usbctlx_cancel_async(hfa384x_t * hw,
+					 hfa384x_usbctlx_t * ctlx)
 {
 	int ret;
 
@@ -3013,7 +3000,7 @@ static int unlocked_usbctlx_cancel_async(hfa384x_t *hw,
 * Call context:
 *	Either, assume interrupt
 ----------------------------------------------------------------*/
-static void unlocked_usbctlx_complete(hfa384x_t *hw, hfa384x_usbctlx_t *ctlx)
+static void unlocked_usbctlx_complete(hfa384x_t * hw, hfa384x_usbctlx_t * ctlx)
 {
 	/* Timers have been stopped, and ctlx should be in
 	 * a terminal state. Retire it from the "active"
@@ -3030,8 +3017,7 @@ static void unlocked_usbctlx_complete(hfa384x_t *hw, hfa384x_usbctlx_t *ctlx)
 
 	default:
 		printk(KERN_ERR "CTLX[%d] not in a terminating state(%s)\n",
-		       le16_to_cpu(ctlx->outbuf.type),
-		       ctlxstr(ctlx->state));
+		       le16_to_cpu(ctlx->outbuf.type), ctlxstr(ctlx->state));
 		break;
 	}			/* switch */
 }
@@ -3052,7 +3038,7 @@ static void unlocked_usbctlx_complete(hfa384x_t *hw, hfa384x_usbctlx_t *ctlx)
 * Call context:
 *	any
 ----------------------------------------------------------------*/
-static void hfa384x_usbctlxq_run(hfa384x_t *hw)
+static void hfa384x_usbctlxq_run(hfa384x_t * hw)
 {
 	unsigned long flags;
 
@@ -3226,14 +3212,13 @@ static void hfa384x_usbin_callback(struct urb *urb)
 
 	case -ENOENT:
 	case -ECONNRESET:
-		pr_debug("status=%d, urb explicitly unlinked.\n",
-		       urb->status);
+		pr_debug("status=%d, urb explicitly unlinked.\n", urb->status);
 		action = ABORT;
 		break;
 
 	default:
 		pr_debug("urb status=%d, transfer flags=0x%x\n",
-		       urb->status, urb->transfer_flags);
+			 urb->status, urb->transfer_flags);
 		++(wlandev->linux_stats.rx_errors);
 		action = RESUBMIT;
 		break;
@@ -3293,18 +3278,17 @@ static void hfa384x_usbin_callback(struct urb *urb)
 
 	case HFA384x_USB_BUFAVAIL:
 		pr_debug("Received BUFAVAIL packet, frmlen=%d\n",
-		       usbin->bufavail.frmlen);
+			 usbin->bufavail.frmlen);
 		break;
 
 	case HFA384x_USB_ERROR:
 		pr_debug("Received USB_ERROR packet, errortype=%d\n",
-		       usbin->usberror.errortype);
+			 usbin->usberror.errortype);
 		break;
 
 	default:
-		printk(KERN_DEBUG
-		       "Unrecognized USBIN packet, type=%x, status=%d\n",
-		       usbin->type, urb_status);
+		pr_debug("Unrecognized USBIN packet, type=%x, status=%d\n",
+			 usbin->type, urb_status);
 		break;
 	}			/* switch */
 
@@ -3334,7 +3318,7 @@ exit:
 * Call context:
 *	interrupt
 ----------------------------------------------------------------*/
-static void hfa384x_usbin_ctlx(hfa384x_t *hw, hfa384x_usbin_t *usbin,
+static void hfa384x_usbin_ctlx(hfa384x_t * hw, hfa384x_usbin_t * usbin,
 			       int urb_status)
 {
 	hfa384x_usbctlx_t *ctlx;
@@ -3400,8 +3384,8 @@ retry:
 			 * our request has been acknowledged. Odd,
 			 * but our OUT URB is still alive...
 			 */
-			printk(KERN_DEBUG
-			       "Causality violation: please reboot Universe, or email linux-wlan-devel@lists.linux-wlan.com\n");
+			pr_debug
+			    ("Causality violation: please reboot Universe, or email linux-wlan-devel@lists.linux-wlan.com\n");
 			ctlx->state = CTLX_RESP_COMPLETE;
 			break;
 
@@ -3455,8 +3439,8 @@ unlock:
 * Call context:
 *	interrupt
 ----------------------------------------------------------------*/
-static void hfa384x_usbin_txcompl(wlandevice_t *wlandev,
-				  hfa384x_usbin_t *usbin)
+static void hfa384x_usbin_txcompl(wlandevice_t * wlandev,
+				  hfa384x_usbin_t * usbin)
 {
 	u16 status;
 
@@ -3486,7 +3470,7 @@ static void hfa384x_usbin_txcompl(wlandevice_t *wlandev,
 * Call context:
 *	interrupt
 ----------------------------------------------------------------*/
-static void hfa384x_usbin_rx(wlandevice_t *wlandev, struct sk_buff *skb)
+static void hfa384x_usbin_rx(wlandevice_t * wlandev, struct sk_buff *skb)
 {
 	hfa384x_usbin_t *usbin = (hfa384x_usbin_t *) skb->data;
 	hfa384x_t *hw = wlandev->priv;
@@ -3553,8 +3537,7 @@ static void hfa384x_usbin_rx(wlandevice_t *wlandev, struct sk_buff *skb)
 			hfa384x_int_rxmonitor(wlandev, &usbin->rxfrm);
 			dev_kfree_skb(skb);
 		} else {
-			printk(KERN_DEBUG
-			       "Received monitor frame: FCSerr set\n");
+			pr_debug("Received monitor frame: FCSerr set\n");
 		}
 		break;
 
@@ -3590,8 +3573,8 @@ done:
 * Call context:
 *	interrupt
 ----------------------------------------------------------------*/
-static void hfa384x_int_rxmonitor(wlandevice_t *wlandev,
-				  hfa384x_usb_rxfrm_t *rxfrm)
+static void hfa384x_int_rxmonitor(wlandevice_t * wlandev,
+				  hfa384x_usb_rxfrm_t * rxfrm)
 {
 	hfa384x_rx_frame_t *rxdesc = &(rxfrm->desc);
 	unsigned int hdrlen = 0;
@@ -3616,7 +3599,7 @@ static void hfa384x_int_rxmonitor(wlandevice_t *wlandev,
 	    (sizeof(p80211_caphdr_t) +
 	     WLAN_HDR_A4_LEN + WLAN_DATA_MAXLEN + WLAN_CRC_LEN)) {
 		pr_debug("overlen frm: len=%zd\n",
-		       skblen - sizeof(p80211_caphdr_t));
+			 skblen - sizeof(p80211_caphdr_t));
 	}
 
 	if ((skb = dev_alloc_skb(skblen)) == NULL) {
@@ -4072,7 +4055,7 @@ static void hfa384x_usb_throttlefn(unsigned long data)
 * Call context:
 *	process or interrupt
 ----------------------------------------------------------------*/
-static int hfa384x_usbctlx_submit(hfa384x_t *hw, hfa384x_usbctlx_t *ctlx)
+static int hfa384x_usbctlx_submit(hfa384x_t * hw, hfa384x_usbctlx_t * ctlx)
 {
 	unsigned long flags;
 	int ret;
@@ -4113,7 +4096,7 @@ static int hfa384x_usbctlx_submit(hfa384x_t *hw, hfa384x_usbctlx_t *ctlx)
 * Call context:
 *	interrupt
 ----------------------------------------------------------------*/
-static void hfa384x_usbout_tx(wlandevice_t *wlandev, hfa384x_usbout_t *usbout)
+static void hfa384x_usbout_tx(wlandevice_t * wlandev, hfa384x_usbout_t * usbout)
 {
 	prism2sta_ev_alloc(wlandev);
 }
@@ -4172,15 +4155,13 @@ static int hfa384x_isgood_pdrcode(u16 pdrcode)
 	default:
 		if (pdrcode < 0x1000) {
 			/* code is OK, but we don't know exactly what it is */
-			printk(KERN_DEBUG
-			       "Encountered unknown PDR#=0x%04x, "
-			       "assuming it's ok.\n", pdrcode);
+			pr_debug("Encountered unknown PDR#=0x%04x, "
+				 "assuming it's ok.\n", pdrcode);
 			return 1;
 		} else {
 			/* bad code */
-			printk(KERN_DEBUG
-			       "Encountered unknown PDR#=0x%04x, "
-			       "(>=0x1000), assuming it's bad.\n", pdrcode);
+			pr_debug("Encountered unknown PDR#=0x%04x, "
+				 "(>=0x1000), assuming it's bad.\n", pdrcode);
 			return 0;
 		}
 		break;
diff --git a/drivers/staging/wlan-ng/p80211conv.c b/drivers/staging/wlan-ng/p80211conv.c
index 2abce0c3444..8b4f3960d9b 100644
--- a/drivers/staging/wlan-ng/p80211conv.c
+++ b/drivers/staging/wlan-ng/p80211conv.c
@@ -102,9 +102,9 @@ static u8 oui_8021h[] = { 0x00, 0x00, 0xf8 };
 * Call context:
 *	May be called in interrupt or non-interrupt context
 ----------------------------------------------------------------*/
-int skb_ether_to_p80211(wlandevice_t *wlandev, u32 ethconv,
-			struct sk_buff *skb, p80211_hdr_t *p80211_hdr,
-			p80211_metawep_t *p80211_wep)
+int skb_ether_to_p80211(wlandevice_t * wlandev, u32 ethconv,
+			struct sk_buff *skb, p80211_hdr_t * p80211_hdr,
+			p80211_metawep_t * p80211_wep)
 {
 
 	u16 fc;
@@ -209,8 +209,8 @@ int skb_ether_to_p80211(wlandevice_t *wlandev, u32 ethconv,
 
 		if ((foo = wep_encrypt(wlandev, skb->data, p80211_wep->data,
 				       skb->len,
-				       (wlandev->
-					hostwep & HOSTWEP_DEFAULTKEY_MASK),
+				       (wlandev->hostwep &
+					HOSTWEP_DEFAULTKEY_MASK),
 				       p80211_wep->iv, p80211_wep->icv))) {
 			printk(KERN_WARNING
 			       "Host en-WEP failed, dropping frame (%d).\n",
@@ -230,8 +230,8 @@ int skb_ether_to_p80211(wlandevice_t *wlandev, u32 ethconv,
 }
 
 /* jkriegl: from orinoco, modified */
-static void orinoco_spy_gather(wlandevice_t *wlandev, char *mac,
-			       p80211_rxmeta_t *rxmeta)
+static void orinoco_spy_gather(wlandevice_t * wlandev, char *mac,
+			       p80211_rxmeta_t * rxmeta)
 {
 	int i;
 
@@ -272,7 +272,7 @@ static void orinoco_spy_gather(wlandevice_t *wlandev, char *mac,
 * Call context:
 *	May be called in interrupt or non-interrupt context
 ----------------------------------------------------------------*/
-int skb_p80211_to_ether(wlandevice_t *wlandev, u32 ethconv,
+int skb_p80211_to_ether(wlandevice_t * wlandev, u32 ethconv,
 			struct sk_buff *skb)
 {
 	netdevice_t *netdev = wlandev->netdev;
@@ -329,9 +329,8 @@ int skb_p80211_to_ether(wlandevice_t *wlandev, u32 ethconv,
 				       skb->data + payload_offset +
 				       payload_length - 4))) {
 			/* de-wep failed, drop skb. */
-			printk(KERN_DEBUG
-			       "Host de-WEP failed, dropping frame (%d).\n",
-			       foo);
+			pr_debug("Host de-WEP failed, dropping frame (%d).\n",
+				 foo);
 			wlandev->rx.decrypt_err++;
 			return 2;
 		}
diff --git a/drivers/staging/wlan-ng/p80211conv.h b/drivers/staging/wlan-ng/p80211conv.h
index 6fe163be24f..0c62df19fa7 100644
--- a/drivers/staging/wlan-ng/p80211conv.h
+++ b/drivers/staging/wlan-ng/p80211conv.h
@@ -153,8 +153,8 @@ struct wlandevice;
 int skb_p80211_to_ether(struct wlandevice *wlandev, u32 ethconv,
 			struct sk_buff *skb);
 int skb_ether_to_p80211(struct wlandevice *wlandev, u32 ethconv,
-			struct sk_buff *skb, p80211_hdr_t *p80211_hdr,
-			p80211_metawep_t *p80211_wep);
+			struct sk_buff *skb, p80211_hdr_t * p80211_hdr,
+			p80211_metawep_t * p80211_wep);
 
 int p80211_stt_findproto(u16 proto);
 
diff --git a/drivers/staging/wlan-ng/p80211hdr.h b/drivers/staging/wlan-ng/p80211hdr.h
index ded47751769..1703c923947 100644
--- a/drivers/staging/wlan-ng/p80211hdr.h
+++ b/drivers/staging/wlan-ng/p80211hdr.h
@@ -68,8 +68,6 @@
 /*================================================================*/
 /* Project Includes */
 
-
-
 /*================================================================*/
 /* Constants */
 
@@ -188,7 +186,6 @@ typedef union p80211_hdr {
 	p80211_hdr_a4_t a4;
 } __attribute__ ((packed)) p80211_hdr_t;
 
-
 /* Frame and header length macros */
 
 #define WLAN_CTL_FRAMELEN(fstype) (\
diff --git a/drivers/staging/wlan-ng/p80211meta.h b/drivers/staging/wlan-ng/p80211meta.h
index 2f3c9fc3358..c1a677be8de 100644
--- a/drivers/staging/wlan-ng/p80211meta.h
+++ b/drivers/staging/wlan-ng/p80211meta.h
@@ -60,7 +60,6 @@
 /*================================================================*/
 /* Project Includes */
 
-
 /*================================================================*/
 /* Types */
 
diff --git a/drivers/staging/wlan-ng/p80211metadef.h b/drivers/staging/wlan-ng/p80211metadef.h
index a29d6ae3e77..da8b6f53c74 100644
--- a/drivers/staging/wlan-ng/p80211metadef.h
+++ b/drivers/staging/wlan-ng/p80211metadef.h
@@ -50,6 +50,14 @@
 #define DIDmsg_dot11req_mibget \
 			(P80211DID_MKSECTION(1) | \
 			P80211DID_MKGROUP(1))
+#define DIDmsg_dot11req_mibget_mibattribute \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_dot11req_mibget_resultcode \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(2) | 0x00000000)
 #define DIDmsg_dot11req_mibset \
 			(P80211DID_MKSECTION(1) | \
 			P80211DID_MKGROUP(2))
@@ -94,12 +102,48 @@
 #define DIDmsg_p2req_readpda \
 			(P80211DID_MKSECTION(5) | \
 			P80211DID_MKGROUP(2))
+#define DIDmsg_p2req_readpda_pda \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_p2req_readpda_resultcode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(2) | 0x00000000)
 #define DIDmsg_p2req_ramdl_state \
 			(P80211DID_MKSECTION(5) | \
 			P80211DID_MKGROUP(11))
+#define DIDmsg_p2req_ramdl_state_enable \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(11) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_p2req_ramdl_state_exeaddr \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(11) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_p2req_ramdl_state_resultcode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(11) | \
+			P80211DID_MKITEM(3) | 0x00000000)
 #define DIDmsg_p2req_ramdl_write \
 			(P80211DID_MKSECTION(5) | \
 			P80211DID_MKGROUP(12))
+#define DIDmsg_p2req_ramdl_write_addr \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(12) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_p2req_ramdl_write_len \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(12) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_p2req_ramdl_write_data \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(12) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_p2req_ramdl_write_resultcode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(12) | \
+			P80211DID_MKITEM(4) | 0x00000000)
 #define DIDmsg_p2req_flashdl_state \
 			(P80211DID_MKSECTION(5) | \
 			P80211DID_MKGROUP(13))
@@ -203,6 +247,10 @@
 			(P80211DID_MKSECTION(5) | \
 			P80211DID_MKGROUP(2) | \
 			P80211DID_MKITEM(1) | 0x18000000)
+#define DIDmib_p2_p2NIC_p2PRISupRange \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(6) | 0x10000000)
 #define DIDmib_p2_p2MAC \
 			(P80211DID_MKSECTION(5) | \
 			P80211DID_MKGROUP(6))
diff --git a/drivers/staging/wlan-ng/p80211mgmt.h b/drivers/staging/wlan-ng/p80211mgmt.h
index 6235fe7f235..c925a45b188 100644
--- a/drivers/staging/wlan-ng/p80211mgmt.h
+++ b/drivers/staging/wlan-ng/p80211mgmt.h
@@ -103,12 +103,10 @@
 /*================================================================*/
 /* Project Includes */
 
-
 #ifndef  _P80211HDR_H
 #include "p80211hdr.h"
 #endif
 
-
 /*================================================================*/
 /* Constants */
 
@@ -504,25 +502,25 @@ typedef struct wlan_fr_deauthen {
 
 } wlan_fr_deauthen_t;
 
-void wlan_mgmt_encode_beacon(wlan_fr_beacon_t *f);
-void wlan_mgmt_decode_beacon(wlan_fr_beacon_t *f);
-void wlan_mgmt_encode_disassoc(wlan_fr_disassoc_t *f);
-void wlan_mgmt_decode_disassoc(wlan_fr_disassoc_t *f);
-void wlan_mgmt_encode_assocreq(wlan_fr_assocreq_t *f);
-void wlan_mgmt_decode_assocreq(wlan_fr_assocreq_t *f);
-void wlan_mgmt_encode_assocresp(wlan_fr_assocresp_t *f);
-void wlan_mgmt_decode_assocresp(wlan_fr_assocresp_t *f);
-void wlan_mgmt_encode_reassocreq(wlan_fr_reassocreq_t *f);
-void wlan_mgmt_decode_reassocreq(wlan_fr_reassocreq_t *f);
-void wlan_mgmt_encode_reassocresp(wlan_fr_reassocresp_t *f);
-void wlan_mgmt_decode_reassocresp(wlan_fr_reassocresp_t *f);
-void wlan_mgmt_encode_probereq(wlan_fr_probereq_t *f);
-void wlan_mgmt_decode_probereq(wlan_fr_probereq_t *f);
-void wlan_mgmt_encode_proberesp(wlan_fr_proberesp_t *f);
-void wlan_mgmt_decode_proberesp(wlan_fr_proberesp_t *f);
-void wlan_mgmt_encode_authen(wlan_fr_authen_t *f);
-void wlan_mgmt_decode_authen(wlan_fr_authen_t *f);
-void wlan_mgmt_encode_deauthen(wlan_fr_deauthen_t *f);
-void wlan_mgmt_decode_deauthen(wlan_fr_deauthen_t *f);
+void wlan_mgmt_encode_beacon(wlan_fr_beacon_t * f);
+void wlan_mgmt_decode_beacon(wlan_fr_beacon_t * f);
+void wlan_mgmt_encode_disassoc(wlan_fr_disassoc_t * f);
+void wlan_mgmt_decode_disassoc(wlan_fr_disassoc_t * f);
+void wlan_mgmt_encode_assocreq(wlan_fr_assocreq_t * f);
+void wlan_mgmt_decode_assocreq(wlan_fr_assocreq_t * f);
+void wlan_mgmt_encode_assocresp(wlan_fr_assocresp_t * f);
+void wlan_mgmt_decode_assocresp(wlan_fr_assocresp_t * f);
+void wlan_mgmt_encode_reassocreq(wlan_fr_reassocreq_t * f);
+void wlan_mgmt_decode_reassocreq(wlan_fr_reassocreq_t * f);
+void wlan_mgmt_encode_reassocresp(wlan_fr_reassocresp_t * f);
+void wlan_mgmt_decode_reassocresp(wlan_fr_reassocresp_t * f);
+void wlan_mgmt_encode_probereq(wlan_fr_probereq_t * f);
+void wlan_mgmt_decode_probereq(wlan_fr_probereq_t * f);
+void wlan_mgmt_encode_proberesp(wlan_fr_proberesp_t * f);
+void wlan_mgmt_decode_proberesp(wlan_fr_proberesp_t * f);
+void wlan_mgmt_encode_authen(wlan_fr_authen_t * f);
+void wlan_mgmt_decode_authen(wlan_fr_authen_t * f);
+void wlan_mgmt_encode_deauthen(wlan_fr_deauthen_t * f);
+void wlan_mgmt_decode_deauthen(wlan_fr_deauthen_t * f);
 
 #endif /* _P80211MGMT_H */
diff --git a/drivers/staging/wlan-ng/p80211msg.h b/drivers/staging/wlan-ng/p80211msg.h
index f15a5d921f3..4ac77274eef 100644
--- a/drivers/staging/wlan-ng/p80211msg.h
+++ b/drivers/staging/wlan-ng/p80211msg.h
@@ -51,7 +51,6 @@
 /*================================================================*/
 /* Project Includes */
 
-
 #define WLAN_DEVNAMELEN_MAX	16
 
 /*--------------------------------------------------------------------*/
diff --git a/drivers/staging/wlan-ng/p80211netdev.c b/drivers/staging/wlan-ng/p80211netdev.c
index bc0d764d851..90f499e00dc 100644
--- a/drivers/staging/wlan-ng/p80211netdev.c
+++ b/drivers/staging/wlan-ng/p80211netdev.c
@@ -49,7 +49,6 @@
 * --------------------------------------------------------------------
 */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
@@ -95,18 +94,18 @@
 static void p80211netdev_rx_bh(unsigned long arg);
 
 /* netdevice method functions */
-static int p80211knetdev_init(netdevice_t *netdev);
-static struct net_device_stats *p80211knetdev_get_stats(netdevice_t *netdev);
-static int p80211knetdev_open(netdevice_t *netdev);
-static int p80211knetdev_stop(netdevice_t *netdev);
+static int p80211knetdev_init(netdevice_t * netdev);
+static struct net_device_stats *p80211knetdev_get_stats(netdevice_t * netdev);
+static int p80211knetdev_open(netdevice_t * netdev);
+static int p80211knetdev_stop(netdevice_t * netdev);
 static int p80211knetdev_hard_start_xmit(struct sk_buff *skb,
-					 netdevice_t *netdev);
-static void p80211knetdev_set_multicast_list(netdevice_t *dev);
-static int p80211knetdev_do_ioctl(netdevice_t *dev, struct ifreq *ifr,
+					 netdevice_t * netdev);
+static void p80211knetdev_set_multicast_list(netdevice_t * dev);
+static int p80211knetdev_do_ioctl(netdevice_t * dev, struct ifreq *ifr,
 				  int cmd);
-static int p80211knetdev_set_mac_address(netdevice_t *dev, void *addr);
-static void p80211knetdev_tx_timeout(netdevice_t *netdev);
-static int p80211_rx_typedrop(wlandevice_t *wlandev, u16 fc);
+static int p80211knetdev_set_mac_address(netdevice_t * dev, void *addr);
+static void p80211knetdev_tx_timeout(netdevice_t * netdev);
+static int p80211_rx_typedrop(wlandevice_t * wlandev, u16 fc);
 
 int wlan_watchdog = 5000;
 module_param(wlan_watchdog, int, 0644);
@@ -128,7 +127,7 @@ MODULE_PARM_DESC(wlan_wext_write, "enable write wireless extensions");
 * Returns:
 *	nothing
 ----------------------------------------------------------------*/
-static int p80211knetdev_init(netdevice_t *netdev)
+static int p80211knetdev_init(netdevice_t * netdev)
 {
 	/* Called in response to register_netdev */
 	/* This is usually the probe function, but the probe has */
@@ -151,7 +150,7 @@ static int p80211knetdev_init(netdevice_t *netdev)
 * Returns:
 *	the address of the statistics structure
 ----------------------------------------------------------------*/
-static struct net_device_stats *p80211knetdev_get_stats(netdevice_t *netdev)
+static struct net_device_stats *p80211knetdev_get_stats(netdevice_t * netdev)
 {
 	wlandevice_t *wlandev = netdev->ml_priv;
 
@@ -175,7 +174,7 @@ static struct net_device_stats *p80211knetdev_get_stats(netdevice_t *netdev)
 * Returns:
 *	zero on success, non-zero otherwise
 ----------------------------------------------------------------*/
-static int p80211knetdev_open(netdevice_t *netdev)
+static int p80211knetdev_open(netdevice_t * netdev)
 {
 	int result = 0;		/* success */
 	wlandevice_t *wlandev = netdev->ml_priv;
@@ -210,7 +209,7 @@ static int p80211knetdev_open(netdevice_t *netdev)
 * Returns:
 *	zero on success, non-zero otherwise
 ----------------------------------------------------------------*/
-static int p80211knetdev_stop(netdevice_t *netdev)
+static int p80211knetdev_stop(netdevice_t * netdev)
 {
 	int result = 0;
 	wlandevice_t *wlandev = netdev->ml_priv;
@@ -237,7 +236,7 @@ static int p80211knetdev_stop(netdevice_t *netdev)
 * Side effects:
 *
 ----------------------------------------------------------------*/
-void p80211netdev_rx(wlandevice_t *wlandev, struct sk_buff *skb)
+void p80211netdev_rx(wlandevice_t * wlandev, struct sk_buff *skb)
 {
 	/* Enqueue for post-irq processing */
 	skb_queue_tail(&wlandev->nsd_rxq, skb);
@@ -346,7 +345,7 @@ static void p80211netdev_rx_bh(unsigned long arg)
 *	zero on success, non-zero on failure.
 ----------------------------------------------------------------*/
 static int p80211knetdev_hard_start_xmit(struct sk_buff *skb,
-					 netdevice_t *netdev)
+					 netdevice_t * netdev)
 {
 	int result = 0;
 	int txresult = -1;
@@ -410,7 +409,7 @@ static int p80211knetdev_hard_start_xmit(struct sk_buff *skb,
 		     &p80211_wep) != 0) {
 			/* convert failed */
 			pr_debug("ether_to_80211(%d) failed.\n",
-			       wlandev->ethconv);
+				 wlandev->ethconv);
 			result = 1;
 			goto failed;
 		}
@@ -473,7 +472,7 @@ failed:
 * Returns:
 *	nothing
 ----------------------------------------------------------------*/
-static void p80211knetdev_set_multicast_list(netdevice_t *dev)
+static void p80211knetdev_set_multicast_list(netdevice_t * dev)
 {
 	wlandevice_t *wlandev = dev->ml_priv;
 
@@ -486,7 +485,7 @@ static void p80211knetdev_set_multicast_list(netdevice_t *dev)
 
 #ifdef SIOCETHTOOL
 
-static int p80211netdev_ethtool(wlandevice_t *wlandev, void __user *useraddr)
+static int p80211netdev_ethtool(wlandevice_t * wlandev, void __user * useraddr)
 {
 	u32 ethcmd;
 	struct ethtool_drvinfo info;
@@ -558,7 +557,7 @@ static int p80211netdev_ethtool(wlandevice_t *wlandev, void __user *useraddr)
 *	Process thread (ioctl caller).  TODO: SMP support may require
 *	locks.
 ----------------------------------------------------------------*/
-static int p80211knetdev_do_ioctl(netdevice_t *dev, struct ifreq *ifr, int cmd)
+static int p80211knetdev_do_ioctl(netdevice_t * dev, struct ifreq *ifr, int cmd)
 {
 	int result = 0;
 	p80211ioctl_req_t *req = (p80211ioctl_req_t *) ifr;
@@ -567,8 +566,6 @@ static int p80211knetdev_do_ioctl(netdevice_t *dev, struct ifreq *ifr, int cmd)
 
 	pr_debug("rx'd ioctl, cmd=%d, len=%d\n", cmd, req->len);
 
-	mutex_lock(&wlandev->ioctl_lock);
-
 #ifdef SIOCETHTOOL
 	if (cmd == SIOCETHTOOL) {
 		result =
@@ -609,8 +606,6 @@ static int p80211knetdev_do_ioctl(netdevice_t *dev, struct ifreq *ifr, int cmd)
 		result = -ENOMEM;
 	}
 bail:
-	mutex_unlock(&wlandev->ioctl_lock);
-
 	return result;		/* If allocate,copyfrom or copyto fails, return errno */
 }
 
@@ -639,7 +634,7 @@ bail:
 *
 * by: Collin R. Mulliner <collin@mulliner.org>
 ----------------------------------------------------------------*/
-static int p80211knetdev_set_mac_address(netdevice_t *dev, void *addr)
+static int p80211knetdev_set_mac_address(netdevice_t * dev, void *addr)
 {
 	struct sockaddr *new_addr = addr;
 	p80211msg_dot11req_mibset_t dot11req;
@@ -654,7 +649,7 @@ static int p80211knetdev_set_mac_address(netdevice_t *dev, void *addr)
 
 	/* Set up some convenience pointers. */
 	mibattr = &dot11req.mibattribute;
-	macaddr = (p80211item_pstr6_t *)&mibattr->data;
+	macaddr = (p80211item_pstr6_t *) & mibattr->data;
 	resultcode = &dot11req.resultcode;
 
 	/* Set up a dot11req_mibset */
@@ -682,7 +677,7 @@ static int p80211knetdev_set_mac_address(netdevice_t *dev, void *addr)
 	resultcode->data = 0;
 
 	/* now fire the request */
-	result = p80211req_dorequest(dev->ml_priv, (u8 *)&dot11req);
+	result = p80211req_dorequest(dev->ml_priv, (u8 *) & dot11req);
 
 	/* If the request wasn't successful, report an error and don't
 	 * change the netdev address
@@ -699,7 +694,7 @@ static int p80211knetdev_set_mac_address(netdevice_t *dev, void *addr)
 	return result;
 }
 
-static int wlan_change_mtu(netdevice_t *dev, int new_mtu)
+static int wlan_change_mtu(netdevice_t * dev, int new_mtu)
 {
 	/* 2312 is max 802.11 payload, 20 is overhead, (ether + llc +snap)
 	   and another 8 for wep. */
@@ -712,17 +707,17 @@ static int wlan_change_mtu(netdevice_t *dev, int new_mtu)
 }
 
 static const struct net_device_ops p80211_netdev_ops = {
-	.ndo_init		= p80211knetdev_init,
-	.ndo_open		= p80211knetdev_open,
-	.ndo_stop		= p80211knetdev_stop,
-	.ndo_get_stats		= p80211knetdev_get_stats,
-	.ndo_start_xmit		= p80211knetdev_hard_start_xmit,
-	.ndo_set_multicast_list	= p80211knetdev_set_multicast_list,
-	.ndo_do_ioctl		= p80211knetdev_do_ioctl,
-	.ndo_set_mac_address	= p80211knetdev_set_mac_address,
-	.ndo_tx_timeout		= p80211knetdev_tx_timeout,
-	.ndo_change_mtu		= wlan_change_mtu,
-	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_init = p80211knetdev_init,
+	.ndo_open = p80211knetdev_open,
+	.ndo_stop = p80211knetdev_stop,
+	.ndo_get_stats = p80211knetdev_get_stats,
+	.ndo_start_xmit = p80211knetdev_hard_start_xmit,
+	.ndo_set_multicast_list = p80211knetdev_set_multicast_list,
+	.ndo_do_ioctl = p80211knetdev_do_ioctl,
+	.ndo_set_mac_address = p80211knetdev_set_mac_address,
+	.ndo_tx_timeout = p80211knetdev_tx_timeout,
+	.ndo_change_mtu = wlan_change_mtu,
+	.ndo_validate_addr = eth_validate_addr,
 };
 
 /*----------------------------------------------------------------
@@ -747,7 +742,7 @@ static const struct net_device_ops p80211_netdev_ops = {
 *	compiled drivers, this function will be called in the
 *	context of the kernel startup code.
 ----------------------------------------------------------------*/
-int wlan_setup(wlandevice_t *wlandev)
+int wlan_setup(wlandevice_t * wlandev)
 {
 	int result = 0;
 	netdevice_t *dev;
@@ -772,11 +767,6 @@ int wlan_setup(wlandevice_t *wlandev)
 		dev->ml_priv = wlandev;
 		dev->netdev_ops = &p80211_netdev_ops;
 
-		mutex_init(&wlandev->ioctl_lock);
-		/* block ioctls until fully initialised. Don't forget to call
-		   allow_ioctls at some point!*/
-		mutex_lock(&wlandev->ioctl_lock);
-
 #if (WIRELESS_EXT < 21)
 		dev->get_wireless_stats = p80211wext_get_wireless_stats;
 #endif
@@ -810,7 +800,7 @@ int wlan_setup(wlandevice_t *wlandev)
 *	compiled drivers, this function will be called in the
 *	context of the kernel startup code.
 ----------------------------------------------------------------*/
-int wlan_unsetup(wlandevice_t *wlandev)
+int wlan_unsetup(wlandevice_t * wlandev)
 {
 	int result = 0;
 
@@ -846,7 +836,7 @@ int wlan_unsetup(wlandevice_t *wlandev)
 * Call Context:
 *	Can be either interrupt or not.
 ----------------------------------------------------------------*/
-int register_wlandev(wlandevice_t *wlandev)
+int register_wlandev(wlandevice_t * wlandev)
 {
 	int i = 0;
 
@@ -874,7 +864,7 @@ int register_wlandev(wlandevice_t *wlandev)
 * Call Context:
 *	Can be either interrupt or not.
 ----------------------------------------------------------------*/
-int unregister_wlandev(wlandevice_t *wlandev)
+int unregister_wlandev(wlandevice_t * wlandev)
 {
 	struct sk_buff *skb;
 
@@ -917,7 +907,7 @@ int unregister_wlandev(wlandevice_t *wlandev)
 * Call context:
 *	Usually interrupt.
 ----------------------------------------------------------------*/
-void p80211netdev_hwremoved(wlandevice_t *wlandev)
+void p80211netdev_hwremoved(wlandevice_t * wlandev)
 {
 	wlandev->hwremoved = 1;
 	if (wlandev->state == WLAN_DEVICE_OPEN)
@@ -947,7 +937,7 @@ void p80211netdev_hwremoved(wlandevice_t *wlandev)
 * Call context:
 *	interrupt
 ----------------------------------------------------------------*/
-static int p80211_rx_typedrop(wlandevice_t *wlandev, u16 fc)
+static int p80211_rx_typedrop(wlandevice_t * wlandev, u16 fc)
 {
 	u16 ftype;
 	u16 fstype;
@@ -1105,7 +1095,7 @@ static int p80211_rx_typedrop(wlandevice_t *wlandev, u16 fc)
 	return drop;
 }
 
-static void p80211knetdev_tx_timeout(netdevice_t *netdev)
+static void p80211knetdev_tx_timeout(netdevice_t * netdev)
 {
 	wlandevice_t *wlandev = netdev->ml_priv;
 
@@ -1117,8 +1107,3 @@ static void p80211knetdev_tx_timeout(netdevice_t *netdev)
 		netif_wake_queue(wlandev->netdev);
 	}
 }
-
-void p80211_allow_ioctls(wlandevice_t *wlandev)
-{
-	mutex_unlock(&wlandev->ioctl_lock);
-}
diff --git a/drivers/staging/wlan-ng/p80211netdev.h b/drivers/staging/wlan-ng/p80211netdev.h
index b96090d8788..f4fcd2b11c4 100644
--- a/drivers/staging/wlan-ng/p80211netdev.h
+++ b/drivers/staging/wlan-ng/p80211netdev.h
@@ -182,16 +182,16 @@ typedef struct wlandevice {
 	unsigned int ethconv;
 
 	/* device methods (init by MSD, used by p80211 */
-	int (*open) (struct wlandevice *wlandev);
-	int (*close) (struct wlandevice *wlandev);
-	void (*reset) (struct wlandevice *wlandev);
-	int (*txframe) (struct wlandevice *wlandev, struct sk_buff *skb,
-			p80211_hdr_t *p80211_hdr,
-			p80211_metawep_t *p80211_wep);
-	int (*mlmerequest) (struct wlandevice *wlandev, p80211msg_t *msg);
-	int (*set_multicast_list) (struct wlandevice *wlandev,
-				   netdevice_t *dev);
-	void (*tx_timeout) (struct wlandevice *wlandev);
+	int (*open) (struct wlandevice * wlandev);
+	int (*close) (struct wlandevice * wlandev);
+	void (*reset) (struct wlandevice * wlandev);
+	int (*txframe) (struct wlandevice * wlandev, struct sk_buff * skb,
+			p80211_hdr_t * p80211_hdr,
+			p80211_metawep_t * p80211_wep);
+	int (*mlmerequest) (struct wlandevice * wlandev, p80211msg_t * msg);
+	int (*set_multicast_list) (struct wlandevice * wlandev,
+				   netdevice_t * dev);
+	void (*tx_timeout) (struct wlandevice * wlandev);
 
 	/* 802.11 State */
 	u8 bssid[WLAN_BSSID_LEN];
@@ -227,22 +227,19 @@ typedef struct wlandevice {
 	u8 spy_number;
 	char spy_address[IW_MAX_SPY][ETH_ALEN];
 	struct iw_quality spy_stat[IW_MAX_SPY];
-
-	struct mutex ioctl_lock;
 } wlandevice_t;
 
 /* WEP stuff */
-int wep_change_key(wlandevice_t *wlandev, int keynum, u8 *key, int keylen);
-int wep_decrypt(wlandevice_t *wlandev, u8 *buf, u32 len, int key_override,
-		u8 *iv, u8 *icv);
-int wep_encrypt(wlandevice_t *wlandev, u8 *buf, u8 *dst, u32 len, int keynum,
-		u8 *iv, u8 *icv);
-
-int wlan_setup(wlandevice_t *wlandev);
-int wlan_unsetup(wlandevice_t *wlandev);
-int register_wlandev(wlandevice_t *wlandev);
-int unregister_wlandev(wlandevice_t *wlandev);
-void p80211netdev_rx(wlandevice_t *wlandev, struct sk_buff *skb);
-void p80211netdev_hwremoved(wlandevice_t *wlandev);
-void p80211_allow_ioctls(wlandevice_t *wlandev);
+int wep_change_key(wlandevice_t * wlandev, int keynum, u8 * key, int keylen);
+int wep_decrypt(wlandevice_t * wlandev, u8 * buf, u32 len, int key_override,
+		u8 * iv, u8 * icv);
+int wep_encrypt(wlandevice_t * wlandev, u8 * buf, u8 * dst, u32 len, int keynum,
+		u8 * iv, u8 * icv);
+
+int wlan_setup(wlandevice_t * wlandev);
+int wlan_unsetup(wlandevice_t * wlandev);
+int register_wlandev(wlandevice_t * wlandev);
+int unregister_wlandev(wlandevice_t * wlandev);
+void p80211netdev_rx(wlandevice_t * wlandev, struct sk_buff *skb);
+void p80211netdev_hwremoved(wlandevice_t * wlandev);
 #endif
diff --git a/drivers/staging/wlan-ng/p80211req.c b/drivers/staging/wlan-ng/p80211req.c
index 15ecba6e469..584c4193ad8 100644
--- a/drivers/staging/wlan-ng/p80211req.c
+++ b/drivers/staging/wlan-ng/p80211req.c
@@ -73,9 +73,9 @@
 #include "p80211metastruct.h"
 #include "p80211req.h"
 
-static void p80211req_handlemsg(wlandevice_t *wlandev, p80211msg_t *msg);
-static int p80211req_mibset_mibget(wlandevice_t *wlandev,
-				   p80211msg_dot11req_mibget_t *mib_msg,
+static void p80211req_handlemsg(wlandevice_t * wlandev, p80211msg_t * msg);
+static int p80211req_mibset_mibget(wlandevice_t * wlandev,
+				   p80211msg_dot11req_mibget_t * mib_msg,
 				   int isget);
 
 /*----------------------------------------------------------------
@@ -94,7 +94,7 @@ static int p80211req_mibset_mibget(wlandevice_t *wlandev,
 *	Potentially blocks the caller, so it's a good idea to
 *	not call this function from an interrupt context.
 ----------------------------------------------------------------*/
-int p80211req_dorequest(wlandevice_t *wlandev, u8 *msgbuf)
+int p80211req_dorequest(wlandevice_t * wlandev, u8 * msgbuf)
 {
 	int result = 0;
 	p80211msg_t *msg = (p80211msg_t *) msgbuf;
@@ -129,7 +129,7 @@ int p80211req_dorequest(wlandevice_t *wlandev, u8 *msgbuf)
 		wlandev->mlmerequest(wlandev, msg);
 
 	clear_bit(1, &(wlandev->request_pending));
-	return result; /* if result==0, msg->status still may contain an err */
+	return result;		/* if result==0, msg->status still may contain an err */
 }
 
 /*----------------------------------------------------------------
@@ -150,7 +150,7 @@ int p80211req_dorequest(wlandevice_t *wlandev, u8 *msgbuf)
 * Call context:
 *	Process thread
 ----------------------------------------------------------------*/
-static void p80211req_handlemsg(wlandevice_t *wlandev, p80211msg_t *msg)
+static void p80211req_handlemsg(wlandevice_t * wlandev, p80211msg_t * msg)
 {
 	switch (msg->msgcode) {
 
@@ -180,8 +180,8 @@ static void p80211req_handlemsg(wlandevice_t *wlandev, p80211msg_t *msg)
 	return;
 }
 
-static int p80211req_mibset_mibget(wlandevice_t *wlandev,
-				   p80211msg_dot11req_mibget_t *mib_msg,
+static int p80211req_mibset_mibget(wlandevice_t * wlandev,
+				   p80211msg_dot11req_mibget_t * mib_msg,
 				   int isget)
 {
 	p80211itemd_t *mibitem = (p80211itemd_t *) mib_msg->mibattribute.data;
@@ -243,8 +243,8 @@ static int p80211req_mibset_mibget(wlandevice_t *wlandev,
 			u32 *data = (u32 *) mibitem->data;
 
 			if (isget) {
-				if (wlandev->
-				    hostwep & HOSTWEP_EXCLUDEUNENCRYPTED)
+				if (wlandev->hostwep &
+				    HOSTWEP_EXCLUDEUNENCRYPTED)
 					*data = P80211ENUM_truth_true;
 				else
 					*data = P80211ENUM_truth_false;
diff --git a/drivers/staging/wlan-ng/p80211req.h b/drivers/staging/wlan-ng/p80211req.h
index a95a45a6814..5d9176762ba 100644
--- a/drivers/staging/wlan-ng/p80211req.h
+++ b/drivers/staging/wlan-ng/p80211req.h
@@ -48,6 +48,6 @@
 #ifndef _LINUX_P80211REQ_H
 #define _LINUX_P80211REQ_H
 
-int p80211req_dorequest(wlandevice_t *wlandev, u8 *msgbuf);
+int p80211req_dorequest(wlandevice_t * wlandev, u8 * msgbuf);
 
 #endif
diff --git a/drivers/staging/wlan-ng/p80211types.h b/drivers/staging/wlan-ng/p80211types.h
index a22437ceddc..043da1e5607 100644
--- a/drivers/staging/wlan-ng/p80211types.h
+++ b/drivers/staging/wlan-ng/p80211types.h
@@ -61,7 +61,6 @@
 /* Project Includes */
 /*================================================================*/
 
-
 /*----------------------------------------------------------------*/
 /* The following constants are indexes into the Mib Category List */
 /* and the Message Category List */
@@ -345,11 +344,11 @@ struct catlistitem;
 /*  metadata items.  Some components may choose to use more, */
 /*  less or different metadata items. */
 
-typedef void (*p80211_totext_t) (struct catlistitem *, u32 did, u8 *itembuf,
+typedef void (*p80211_totext_t) (struct catlistitem *, u32 did, u8 * itembuf,
 				 char *textbuf);
-typedef void (*p80211_fromtext_t) (struct catlistitem *, u32 did, u8 *itembuf,
+typedef void (*p80211_fromtext_t) (struct catlistitem *, u32 did, u8 * itembuf,
 				   char *textbuf);
-typedef u32(*p80211_valid_t) (struct catlistitem *, u32 did, u8 *itembuf);
+typedef u32(*p80211_valid_t) (struct catlistitem *, u32 did, u8 * itembuf);
 
 /*----------------------------------------------------------------*/
 /* Enumeration Lists */
diff --git a/drivers/staging/wlan-ng/p80211wep.c b/drivers/staging/wlan-ng/p80211wep.c
index 405ce89e4e6..f0b4275ab22 100644
--- a/drivers/staging/wlan-ng/p80211wep.c
+++ b/drivers/staging/wlan-ng/p80211wep.c
@@ -48,9 +48,6 @@
 /*================================================================*/
 /* System Includes */
 
-
-#include <linux/version.h>
-
 #include <linux/netdevice.h>
 #include <linux/wireless.h>
 #include <linux/slab.h>
@@ -77,58 +74,58 @@
 /* Local Static Definitions */
 
 static const u32 wep_crc32_table[256] = {
-        0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L,
-        0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L,
-        0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L,
-        0x90bf1d91L, 0x1db71064L, 0x6ab020f2L, 0xf3b97148L, 0x84be41deL,
-        0x1adad47dL, 0x6ddde4ebL, 0xf4d4b551L, 0x83d385c7L, 0x136c9856L,
-        0x646ba8c0L, 0xfd62f97aL, 0x8a65c9ecL, 0x14015c4fL, 0x63066cd9L,
-        0xfa0f3d63L, 0x8d080df5L, 0x3b6e20c8L, 0x4c69105eL, 0xd56041e4L,
-        0xa2677172L, 0x3c03e4d1L, 0x4b04d447L, 0xd20d85fdL, 0xa50ab56bL,
-        0x35b5a8faL, 0x42b2986cL, 0xdbbbc9d6L, 0xacbcf940L, 0x32d86ce3L,
-        0x45df5c75L, 0xdcd60dcfL, 0xabd13d59L, 0x26d930acL, 0x51de003aL,
-        0xc8d75180L, 0xbfd06116L, 0x21b4f4b5L, 0x56b3c423L, 0xcfba9599L,
-        0xb8bda50fL, 0x2802b89eL, 0x5f058808L, 0xc60cd9b2L, 0xb10be924L,
-        0x2f6f7c87L, 0x58684c11L, 0xc1611dabL, 0xb6662d3dL, 0x76dc4190L,
-        0x01db7106L, 0x98d220bcL, 0xefd5102aL, 0x71b18589L, 0x06b6b51fL,
-        0x9fbfe4a5L, 0xe8b8d433L, 0x7807c9a2L, 0x0f00f934L, 0x9609a88eL,
-        0xe10e9818L, 0x7f6a0dbbL, 0x086d3d2dL, 0x91646c97L, 0xe6635c01L,
-        0x6b6b51f4L, 0x1c6c6162L, 0x856530d8L, 0xf262004eL, 0x6c0695edL,
-        0x1b01a57bL, 0x8208f4c1L, 0xf50fc457L, 0x65b0d9c6L, 0x12b7e950L,
-        0x8bbeb8eaL, 0xfcb9887cL, 0x62dd1ddfL, 0x15da2d49L, 0x8cd37cf3L,
-        0xfbd44c65L, 0x4db26158L, 0x3ab551ceL, 0xa3bc0074L, 0xd4bb30e2L,
-        0x4adfa541L, 0x3dd895d7L, 0xa4d1c46dL, 0xd3d6f4fbL, 0x4369e96aL,
-        0x346ed9fcL, 0xad678846L, 0xda60b8d0L, 0x44042d73L, 0x33031de5L,
-        0xaa0a4c5fL, 0xdd0d7cc9L, 0x5005713cL, 0x270241aaL, 0xbe0b1010L,
-        0xc90c2086L, 0x5768b525L, 0x206f85b3L, 0xb966d409L, 0xce61e49fL,
-        0x5edef90eL, 0x29d9c998L, 0xb0d09822L, 0xc7d7a8b4L, 0x59b33d17L,
-        0x2eb40d81L, 0xb7bd5c3bL, 0xc0ba6cadL, 0xedb88320L, 0x9abfb3b6L,
-        0x03b6e20cL, 0x74b1d29aL, 0xead54739L, 0x9dd277afL, 0x04db2615L,
-        0x73dc1683L, 0xe3630b12L, 0x94643b84L, 0x0d6d6a3eL, 0x7a6a5aa8L,
-        0xe40ecf0bL, 0x9309ff9dL, 0x0a00ae27L, 0x7d079eb1L, 0xf00f9344L,
-        0x8708a3d2L, 0x1e01f268L, 0x6906c2feL, 0xf762575dL, 0x806567cbL,
-        0x196c3671L, 0x6e6b06e7L, 0xfed41b76L, 0x89d32be0L, 0x10da7a5aL,
-        0x67dd4accL, 0xf9b9df6fL, 0x8ebeeff9L, 0x17b7be43L, 0x60b08ed5L,
-        0xd6d6a3e8L, 0xa1d1937eL, 0x38d8c2c4L, 0x4fdff252L, 0xd1bb67f1L,
-        0xa6bc5767L, 0x3fb506ddL, 0x48b2364bL, 0xd80d2bdaL, 0xaf0a1b4cL,
-        0x36034af6L, 0x41047a60L, 0xdf60efc3L, 0xa867df55L, 0x316e8eefL,
-        0x4669be79L, 0xcb61b38cL, 0xbc66831aL, 0x256fd2a0L, 0x5268e236L,
-        0xcc0c7795L, 0xbb0b4703L, 0x220216b9L, 0x5505262fL, 0xc5ba3bbeL,
-        0xb2bd0b28L, 0x2bb45a92L, 0x5cb36a04L, 0xc2d7ffa7L, 0xb5d0cf31L,
-        0x2cd99e8bL, 0x5bdeae1dL, 0x9b64c2b0L, 0xec63f226L, 0x756aa39cL,
-        0x026d930aL, 0x9c0906a9L, 0xeb0e363fL, 0x72076785L, 0x05005713L,
-        0x95bf4a82L, 0xe2b87a14L, 0x7bb12baeL, 0x0cb61b38L, 0x92d28e9bL,
-        0xe5d5be0dL, 0x7cdcefb7L, 0x0bdbdf21L, 0x86d3d2d4L, 0xf1d4e242L,
-        0x68ddb3f8L, 0x1fda836eL, 0x81be16cdL, 0xf6b9265bL, 0x6fb077e1L,
-        0x18b74777L, 0x88085ae6L, 0xff0f6a70L, 0x66063bcaL, 0x11010b5cL,
-        0x8f659effL, 0xf862ae69L, 0x616bffd3L, 0x166ccf45L, 0xa00ae278L,
-        0xd70dd2eeL, 0x4e048354L, 0x3903b3c2L, 0xa7672661L, 0xd06016f7L,
-        0x4969474dL, 0x3e6e77dbL, 0xaed16a4aL, 0xd9d65adcL, 0x40df0b66L,
-        0x37d83bf0L, 0xa9bcae53L, 0xdebb9ec5L, 0x47b2cf7fL, 0x30b5ffe9L,
-        0xbdbdf21cL, 0xcabac28aL, 0x53b39330L, 0x24b4a3a6L, 0xbad03605L,
-        0xcdd70693L, 0x54de5729L, 0x23d967bfL, 0xb3667a2eL, 0xc4614ab8L,
-        0x5d681b02L, 0x2a6f2b94L, 0xb40bbe37L, 0xc30c8ea1L, 0x5a05df1bL,
-        0x2d02ef8dL
+	0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L,
+	0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L,
+	0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L,
+	0x90bf1d91L, 0x1db71064L, 0x6ab020f2L, 0xf3b97148L, 0x84be41deL,
+	0x1adad47dL, 0x6ddde4ebL, 0xf4d4b551L, 0x83d385c7L, 0x136c9856L,
+	0x646ba8c0L, 0xfd62f97aL, 0x8a65c9ecL, 0x14015c4fL, 0x63066cd9L,
+	0xfa0f3d63L, 0x8d080df5L, 0x3b6e20c8L, 0x4c69105eL, 0xd56041e4L,
+	0xa2677172L, 0x3c03e4d1L, 0x4b04d447L, 0xd20d85fdL, 0xa50ab56bL,
+	0x35b5a8faL, 0x42b2986cL, 0xdbbbc9d6L, 0xacbcf940L, 0x32d86ce3L,
+	0x45df5c75L, 0xdcd60dcfL, 0xabd13d59L, 0x26d930acL, 0x51de003aL,
+	0xc8d75180L, 0xbfd06116L, 0x21b4f4b5L, 0x56b3c423L, 0xcfba9599L,
+	0xb8bda50fL, 0x2802b89eL, 0x5f058808L, 0xc60cd9b2L, 0xb10be924L,
+	0x2f6f7c87L, 0x58684c11L, 0xc1611dabL, 0xb6662d3dL, 0x76dc4190L,
+	0x01db7106L, 0x98d220bcL, 0xefd5102aL, 0x71b18589L, 0x06b6b51fL,
+	0x9fbfe4a5L, 0xe8b8d433L, 0x7807c9a2L, 0x0f00f934L, 0x9609a88eL,
+	0xe10e9818L, 0x7f6a0dbbL, 0x086d3d2dL, 0x91646c97L, 0xe6635c01L,
+	0x6b6b51f4L, 0x1c6c6162L, 0x856530d8L, 0xf262004eL, 0x6c0695edL,
+	0x1b01a57bL, 0x8208f4c1L, 0xf50fc457L, 0x65b0d9c6L, 0x12b7e950L,
+	0x8bbeb8eaL, 0xfcb9887cL, 0x62dd1ddfL, 0x15da2d49L, 0x8cd37cf3L,
+	0xfbd44c65L, 0x4db26158L, 0x3ab551ceL, 0xa3bc0074L, 0xd4bb30e2L,
+	0x4adfa541L, 0x3dd895d7L, 0xa4d1c46dL, 0xd3d6f4fbL, 0x4369e96aL,
+	0x346ed9fcL, 0xad678846L, 0xda60b8d0L, 0x44042d73L, 0x33031de5L,
+	0xaa0a4c5fL, 0xdd0d7cc9L, 0x5005713cL, 0x270241aaL, 0xbe0b1010L,
+	0xc90c2086L, 0x5768b525L, 0x206f85b3L, 0xb966d409L, 0xce61e49fL,
+	0x5edef90eL, 0x29d9c998L, 0xb0d09822L, 0xc7d7a8b4L, 0x59b33d17L,
+	0x2eb40d81L, 0xb7bd5c3bL, 0xc0ba6cadL, 0xedb88320L, 0x9abfb3b6L,
+	0x03b6e20cL, 0x74b1d29aL, 0xead54739L, 0x9dd277afL, 0x04db2615L,
+	0x73dc1683L, 0xe3630b12L, 0x94643b84L, 0x0d6d6a3eL, 0x7a6a5aa8L,
+	0xe40ecf0bL, 0x9309ff9dL, 0x0a00ae27L, 0x7d079eb1L, 0xf00f9344L,
+	0x8708a3d2L, 0x1e01f268L, 0x6906c2feL, 0xf762575dL, 0x806567cbL,
+	0x196c3671L, 0x6e6b06e7L, 0xfed41b76L, 0x89d32be0L, 0x10da7a5aL,
+	0x67dd4accL, 0xf9b9df6fL, 0x8ebeeff9L, 0x17b7be43L, 0x60b08ed5L,
+	0xd6d6a3e8L, 0xa1d1937eL, 0x38d8c2c4L, 0x4fdff252L, 0xd1bb67f1L,
+	0xa6bc5767L, 0x3fb506ddL, 0x48b2364bL, 0xd80d2bdaL, 0xaf0a1b4cL,
+	0x36034af6L, 0x41047a60L, 0xdf60efc3L, 0xa867df55L, 0x316e8eefL,
+	0x4669be79L, 0xcb61b38cL, 0xbc66831aL, 0x256fd2a0L, 0x5268e236L,
+	0xcc0c7795L, 0xbb0b4703L, 0x220216b9L, 0x5505262fL, 0xc5ba3bbeL,
+	0xb2bd0b28L, 0x2bb45a92L, 0x5cb36a04L, 0xc2d7ffa7L, 0xb5d0cf31L,
+	0x2cd99e8bL, 0x5bdeae1dL, 0x9b64c2b0L, 0xec63f226L, 0x756aa39cL,
+	0x026d930aL, 0x9c0906a9L, 0xeb0e363fL, 0x72076785L, 0x05005713L,
+	0x95bf4a82L, 0xe2b87a14L, 0x7bb12baeL, 0x0cb61b38L, 0x92d28e9bL,
+	0xe5d5be0dL, 0x7cdcefb7L, 0x0bdbdf21L, 0x86d3d2d4L, 0xf1d4e242L,
+	0x68ddb3f8L, 0x1fda836eL, 0x81be16cdL, 0xf6b9265bL, 0x6fb077e1L,
+	0x18b74777L, 0x88085ae6L, 0xff0f6a70L, 0x66063bcaL, 0x11010b5cL,
+	0x8f659effL, 0xf862ae69L, 0x616bffd3L, 0x166ccf45L, 0xa00ae278L,
+	0xd70dd2eeL, 0x4e048354L, 0x3903b3c2L, 0xa7672661L, 0xd06016f7L,
+	0x4969474dL, 0x3e6e77dbL, 0xaed16a4aL, 0xd9d65adcL, 0x40df0b66L,
+	0x37d83bf0L, 0xa9bcae53L, 0xdebb9ec5L, 0x47b2cf7fL, 0x30b5ffe9L,
+	0xbdbdf21cL, 0xcabac28aL, 0x53b39330L, 0x24b4a3a6L, 0xbad03605L,
+	0xcdd70693L, 0x54de5729L, 0x23d967bfL, 0xb3667a2eL, 0xc4614ab8L,
+	0x5d681b02L, 0x2a6f2b94L, 0xb40bbe37L, 0xc30c8ea1L, 0x5a05df1bL,
+	0x2d02ef8dL
 };
 
 /*================================================================*/
@@ -139,17 +136,24 @@ static const u32 wep_crc32_table[256] = {
 
 /* keylen in bytes! */
 
-int wep_change_key(wlandevice_t *wlandev, int keynum, u8* key, int keylen)
+int wep_change_key(wlandevice_t * wlandev, int keynum, u8 * key, int keylen)
 {
-	if (keylen < 0)  return -1;
-	if (keylen >= MAX_KEYLEN) return -1;
-	if (key == NULL) return -1;
-	if (keynum < 0)  return -1;
-	if (keynum >= NUM_WEPKEYS) return -1;
-
+	if (keylen < 0)
+		return -1;
+	if (keylen >= MAX_KEYLEN)
+		return -1;
+	if (key == NULL)
+		return -1;
+	if (keynum < 0)
+		return -1;
+	if (keynum >= NUM_WEPKEYS)
+		return -1;
 
 #ifdef WEP_DEBUG
-	printk(KERN_DEBUG "WEP key %d len %d = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n", keynum, keylen, key[0], key[1], key[2], key[3], key[4], key[5], key[6], key[7]);
+	printk(KERN_DEBUG
+	       "WEP key %d len %d = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
+	       keynum, keylen, key[0], key[1], key[2], key[3], key[4], key[5],
+	       key[6], key[7]);
 #endif
 
 	wlandev->wep_keylens[keynum] = keylen;
@@ -162,14 +166,16 @@ int wep_change_key(wlandevice_t *wlandev, int keynum, u8* key, int keylen)
   4-byte IV at start of buffer, 4-byte ICV at end of buffer.
   if successful, buf start is payload begin, length -= 8;
  */
-int wep_decrypt(wlandevice_t *wlandev, u8 *buf, u32 len, int key_override, u8 *iv, u8 *icv)
+int wep_decrypt(wlandevice_t * wlandev, u8 * buf, u32 len, int key_override,
+		u8 * iv, u8 * icv)
 {
 	u32 i, j, k, crc, keylen;
 	u8 s[256], key[64], c_crc[4];
 	u8 keyidx;
 
 	/* Needs to be at least 8 bytes of payload */
-	if (len <= 0) return -1;
+	if (len <= 0)
+		return -1;
 
 	/* initialize the first bytes of the key from the IV */
 	key[0] = iv[0];
@@ -180,19 +186,24 @@ int wep_decrypt(wlandevice_t *wlandev, u8 *buf, u32 len, int key_override, u8 *i
 	if (key_override >= 0)
 		keyidx = key_override;
 
-	if (keyidx >= NUM_WEPKEYS) return -2;
+	if (keyidx >= NUM_WEPKEYS)
+		return -2;
 
 	keylen = wlandev->wep_keylens[keyidx];
 
-	if (keylen == 0) return -3;
+	if (keylen == 0)
+		return -3;
 
 	/* copy the rest of the key over from the designated key */
-	memcpy(key+3, wlandev->wep_keys[keyidx], keylen);
+	memcpy(key + 3, wlandev->wep_keys[keyidx], keylen);
 
-	keylen+=3;  /* add in IV bytes */
+	keylen += 3;		/* add in IV bytes */
 
 #ifdef WEP_DEBUG
-	printk(KERN_DEBUG "D %d: %02x %02x %02x (%d %d) %02x:%02x:%02x:%02x:%02x\n", len, key[0], key[1], key[2], keyidx, keylen, key[3], key[4], key[5], key[6], key[7]);
+	printk(KERN_DEBUG
+	       "D %d: %02x %02x %02x (%d %d) %02x:%02x:%02x:%02x:%02x\n", len,
+	       key[0], key[1], key[2], keyidx, keylen, key[3], key[4], key[5],
+	       key[6], key[7]);
 #endif
 
 	/* set up the RC4 state */
@@ -201,16 +212,16 @@ int wep_decrypt(wlandevice_t *wlandev, u8 *buf, u32 len, int key_override, u8 *i
 	j = 0;
 	for (i = 0; i < 256; i++) {
 		j = (j + s[i] + key[i % keylen]) & 0xff;
-		swap(i,j);
+		swap(i, j);
 	}
 
 	/* Apply the RC4 to the data, update the CRC32 */
 	crc = ~0;
 	i = j = 0;
 	for (k = 0; k < len; k++) {
-		i = (i+1) & 0xff;
-		j = (j+s[i]) & 0xff;
-		swap(i,j);
+		i = (i + 1) & 0xff;
+		j = (j + s[i]) & 0xff;
+		swap(i, j);
 		buf[k] ^= s[(s[i] + s[j]) & 0xff];
 		crc = wep_crc32_table[(crc ^ buf[k]) & 0xff] ^ (crc >> 8);
 	}
@@ -224,28 +235,32 @@ int wep_decrypt(wlandevice_t *wlandev, u8 *buf, u32 len, int key_override, u8 *i
 
 	for (k = 0; k < 4; k++) {
 		i = (i + 1) & 0xff;
-		j = (j+s[i]) & 0xff;
-		swap(i,j);
+		j = (j + s[i]) & 0xff;
+		swap(i, j);
 		if ((c_crc[k] ^ s[(s[i] + s[j]) & 0xff]) != icv[k])
-			return -(4 | (k << 4)) ; /* ICV mismatch */
+			return -(4 | (k << 4));	/* ICV mismatch */
 	}
 
 	return 0;
 }
 
 /* encrypts in-place. */
-int wep_encrypt(wlandevice_t *wlandev, u8 *buf, u8 *dst, u32 len, int keynum, u8 *iv, u8 *icv)
+int wep_encrypt(wlandevice_t * wlandev, u8 * buf, u8 * dst, u32 len, int keynum,
+		u8 * iv, u8 * icv)
 {
 	u32 i, j, k, crc, keylen;
 	u8 s[256], key[64];
 
 	/* no point in WEPping an empty frame */
-	if (len <= 0) return -1;
+	if (len <= 0)
+		return -1;
 
 	/* we need to have a real key.. */
-	if (keynum >= NUM_WEPKEYS) return -2;
+	if (keynum >= NUM_WEPKEYS)
+		return -2;
 	keylen = wlandev->wep_keylens[keynum];
-	if (keylen <= 0) return -3;
+	if (keylen <= 0)
+		return -3;
 
 	/* use a random IV.  And skip known weak ones. */
 	get_random_bytes(iv, 3);
@@ -259,12 +274,15 @@ int wep_encrypt(wlandevice_t *wlandev, u8 *buf, u8 *dst, u32 len, int keynum, u8
 	key[2] = iv[2];
 
 	/* copy the rest of the key over from the designated key */
-	memcpy(key+3, wlandev->wep_keys[keynum], keylen);
+	memcpy(key + 3, wlandev->wep_keys[keynum], keylen);
 
-	keylen+=3;  /* add in IV bytes */
+	keylen += 3;		/* add in IV bytes */
 
 #ifdef WEP_DEBUG
-	printk(KERN_DEBUG "E %d (%d/%d %d) %02x %02x %02x %02x:%02x:%02x:%02x:%02x\n", len,  iv[3], keynum, keylen, key[0], key[1], key[2], key[3], key[4], key[5], key[6], key[7]);
+	printk(KERN_DEBUG
+	       "E %d (%d/%d %d) %02x %02x %02x %02x:%02x:%02x:%02x:%02x\n", len,
+	       iv[3], keynum, keylen, key[0], key[1], key[2], key[3], key[4],
+	       key[5], key[6], key[7]);
 #endif
 
 	/* set up the RC4 state */
@@ -273,7 +291,7 @@ int wep_encrypt(wlandevice_t *wlandev, u8 *buf, u8 *dst, u32 len, int keynum, u8
 	j = 0;
 	for (i = 0; i < 256; i++) {
 		j = (j + s[i] + key[i % keylen]) & 0xff;
-		swap(i,j);
+		swap(i, j);
 	}
 
 	/* Update CRC32 then apply RC4 to the data */
@@ -281,9 +299,9 @@ int wep_encrypt(wlandevice_t *wlandev, u8 *buf, u8 *dst, u32 len, int keynum, u8
 	i = j = 0;
 	for (k = 0; k < len; k++) {
 		crc = wep_crc32_table[(crc ^ buf[k]) & 0xff] ^ (crc >> 8);
-		i = (i+1) & 0xff;
-		j = (j+s[i]) & 0xff;
-		swap(i,j);
+		i = (i + 1) & 0xff;
+		j = (j + s[i]) & 0xff;
+		swap(i, j);
 		dst[k] = buf[k] ^ s[(s[i] + s[j]) & 0xff];
 	}
 	crc = ~crc;
@@ -296,8 +314,8 @@ int wep_encrypt(wlandevice_t *wlandev, u8 *buf, u8 *dst, u32 len, int keynum, u8
 
 	for (k = 0; k < 4; k++) {
 		i = (i + 1) & 0xff;
-		j = (j+s[i]) & 0xff;
-		swap(i,j);
+		j = (j + s[i]) & 0xff;
+		swap(i, j);
 		icv[k] ^= s[(s[i] + s[j]) & 0xff];
 	}
 
diff --git a/drivers/staging/wlan-ng/p80211wext.c b/drivers/staging/wlan-ng/p80211wext.c
index 96078b0ea6a..984e45d9f70 100644
--- a/drivers/staging/wlan-ng/p80211wext.c
+++ b/drivers/staging/wlan-ng/p80211wext.c
@@ -37,8 +37,6 @@
 /*================================================================*/
 /* System Includes */
 
-
-
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/types.h>
@@ -68,10 +66,10 @@
 #include "p80211ioctl.h"
 #include "p80211req.h"
 
-static int p80211wext_giwrate(netdevice_t *dev,
+static int p80211wext_giwrate(netdevice_t * dev,
 			      struct iw_request_info *info,
 			      struct iw_param *rrq, char *extra);
-static int p80211wext_giwessid(netdevice_t *dev,
+static int p80211wext_giwessid(netdevice_t * dev,
 			       struct iw_request_info *info,
 			       struct iw_point *data, char *essid);
 
@@ -132,7 +130,7 @@ static int qual_as_percent(int snr)
 	return 100;
 }
 
-static int p80211wext_dorequest(wlandevice_t *wlandev, u32 did, u32 data)
+static int p80211wext_dorequest(wlandevice_t * wlandev, u32 did, u32 data)
 {
 	p80211msg_dot11req_mibset_t msg;
 	p80211item_uint32_t mibitem;
@@ -142,12 +140,12 @@ static int p80211wext_dorequest(wlandevice_t *wlandev, u32 did, u32 data)
 	mibitem.did = did;
 	mibitem.data = data;
 	memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
-	result = p80211req_dorequest(wlandev, (u8 *)&msg);
+	result = p80211req_dorequest(wlandev, (u8 *) & msg);
 
 	return result;
 }
 
-static int p80211wext_autojoin(wlandevice_t *wlandev)
+static int p80211wext_autojoin(wlandevice_t * wlandev)
 {
 	p80211msg_lnxreq_autojoin_t msg;
 	struct iw_point data;
@@ -179,7 +177,7 @@ static int p80211wext_autojoin(wlandevice_t *wlandev)
 	memcpy(msg.ssid.data.data, ssid, data.length);
 	msg.ssid.data.len = data.length;
 
-	result = p80211req_dorequest(wlandev, (u8 *)&msg);
+	result = p80211req_dorequest(wlandev, (u8 *) & msg);
 
 	if (result) {
 		err = -EFAULT;
@@ -216,7 +214,7 @@ struct iw_statistics *p80211wext_get_wireless_stats(netdevice_t * dev)
 	if (wlandev->mlmerequest == NULL)
 		return NULL;
 
-	retval = wlandev->mlmerequest(wlandev, (p80211msg_t *)&quality);
+	retval = wlandev->mlmerequest(wlandev, (p80211msg_t *) & quality);
 
 	wstats->qual.qual = qual_as_percent(quality.link.data);	/* overall link quality */
 	wstats->qual.level = quality.level.data;	/* instant signal level */
@@ -234,7 +232,7 @@ struct iw_statistics *p80211wext_get_wireless_stats(netdevice_t * dev)
 	return wstats;
 }
 
-static int p80211wext_giwname(netdevice_t *dev,
+static int p80211wext_giwname(netdevice_t * dev,
 			      struct iw_request_info *info,
 			      char *name, char *extra)
 {
@@ -263,7 +261,7 @@ exit:
 	return err;
 }
 
-static int p80211wext_giwfreq(netdevice_t *dev,
+static int p80211wext_giwfreq(netdevice_t * dev,
 			      struct iw_request_info *info,
 			      struct iw_freq *freq, char *extra)
 {
@@ -276,7 +274,7 @@ static int p80211wext_giwfreq(netdevice_t *dev,
 	msg.msgcode = DIDmsg_dot11req_mibget;
 	mibitem.did = DIDmib_dot11phy_dot11PhyDSSSTable_dot11CurrentChannel;
 	memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
-	result = p80211req_dorequest(wlandev, (u8 *)&msg);
+	result = p80211req_dorequest(wlandev, (u8 *) & msg);
 
 	if (result) {
 		err = -EFAULT;
@@ -298,7 +296,7 @@ exit:
 	return err;
 }
 
-static int p80211wext_siwfreq(netdevice_t *dev,
+static int p80211wext_siwfreq(netdevice_t * dev,
 			      struct iw_request_info *info,
 			      struct iw_freq *freq, char *extra)
 {
@@ -323,7 +321,7 @@ static int p80211wext_siwfreq(netdevice_t *dev,
 		mibitem.data = p80211_mhz_to_channel(freq->m);
 
 	memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
-	result = p80211req_dorequest(wlandev, (u8 *)&msg);
+	result = p80211req_dorequest(wlandev, (u8 *) & msg);
 
 	if (result) {
 		err = -EFAULT;
@@ -334,9 +332,9 @@ exit:
 	return err;
 }
 
-static int p80211wext_giwmode(netdevice_t *dev,
+static int p80211wext_giwmode(netdevice_t * dev,
 			      struct iw_request_info *info,
-			      __u32 *mode, char *extra)
+			      __u32 * mode, char *extra)
 {
 	wlandevice_t *wlandev = dev->ml_priv;
 
@@ -358,9 +356,9 @@ static int p80211wext_giwmode(netdevice_t *dev,
 	return 0;
 }
 
-static int p80211wext_siwmode(netdevice_t *dev,
+static int p80211wext_siwmode(netdevice_t * dev,
 			      struct iw_request_info *info,
-			      __u32 *mode, char *extra)
+			      __u32 * mode, char *extra)
 {
 	wlandevice_t *wlandev = dev->ml_priv;
 	p80211item_uint32_t mibitem;
@@ -404,7 +402,7 @@ static int p80211wext_siwmode(netdevice_t *dev,
 	mibitem.did = DIDmib_p2_p2Static_p2CnfPortType;
 	mibitem.data = (*mode == IW_MODE_ADHOC) ? 0 : 1;
 	memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
-	result = p80211req_dorequest(wlandev, (u8 *)&msg);
+	result = p80211req_dorequest(wlandev, (u8 *) & msg);
 
 	if (result)
 		err = -EFAULT;
@@ -413,7 +411,7 @@ exit:
 	return err;
 }
 
-static int p80211wext_giwrange(netdevice_t *dev,
+static int p80211wext_giwrange(netdevice_t * dev,
 			       struct iw_request_info *info,
 			       struct iw_point *data, char *extra)
 {
@@ -482,7 +480,7 @@ static int p80211wext_giwrange(netdevice_t *dev,
 	return 0;
 }
 
-static int p80211wext_giwap(netdevice_t *dev,
+static int p80211wext_giwap(netdevice_t * dev,
 			    struct iw_request_info *info,
 			    struct sockaddr *ap_addr, char *extra)
 {
@@ -495,7 +493,7 @@ static int p80211wext_giwap(netdevice_t *dev,
 	return 0;
 }
 
-static int p80211wext_giwencode(netdevice_t *dev,
+static int p80211wext_giwencode(netdevice_t * dev,
 				struct iw_request_info *info,
 				struct iw_point *erq, char *key)
 {
@@ -536,7 +534,7 @@ exit:
 	return err;
 }
 
-static int p80211wext_siwencode(netdevice_t *dev,
+static int p80211wext_siwencode(netdevice_t * dev,
 				struct iw_request_info *info,
 				struct iw_point *erq, char *key)
 {
@@ -626,7 +624,7 @@ static int p80211wext_siwencode(netdevice_t *dev,
 
 			msg.msgcode = DIDmsg_dot11req_mibset;
 			memcpy(&msg.mibattribute.data, &pstr, sizeof(pstr));
-			result = p80211req_dorequest(wlandev, (u8 *)&msg);
+			result = p80211req_dorequest(wlandev, (u8 *) & msg);
 
 			if (result) {
 				err = -EFAULT;
@@ -683,7 +681,7 @@ exit:
 	return err;
 }
 
-static int p80211wext_giwessid(netdevice_t *dev,
+static int p80211wext_giwessid(netdevice_t * dev,
 			       struct iw_request_info *info,
 			       struct iw_point *data, char *essid)
 {
@@ -706,7 +704,7 @@ static int p80211wext_giwessid(netdevice_t *dev,
 	return 0;
 }
 
-static int p80211wext_siwessid(netdevice_t *dev,
+static int p80211wext_siwessid(netdevice_t * dev,
 			       struct iw_request_info *info,
 			       struct iw_point *data, char *essid)
 {
@@ -742,7 +740,7 @@ static int p80211wext_siwessid(netdevice_t *dev,
 	msg.ssid.data.len = length;
 
 	pr_debug("autojoin_ssid for %s \n", essid);
-	result = p80211req_dorequest(wlandev, (u8 *)&msg);
+	result = p80211req_dorequest(wlandev, (u8 *) & msg);
 	pr_debug("autojoin_ssid %d\n", result);
 
 	if (result) {
@@ -754,7 +752,7 @@ exit:
 	return err;
 }
 
-static int p80211wext_siwcommit(netdevice_t *dev,
+static int p80211wext_siwcommit(netdevice_t * dev,
 				struct iw_request_info *info,
 				struct iw_point *data, char *essid)
 {
@@ -773,7 +771,7 @@ exit:
 	return err;
 }
 
-static int p80211wext_giwrate(netdevice_t *dev,
+static int p80211wext_giwrate(netdevice_t * dev,
 			      struct iw_request_info *info,
 			      struct iw_param *rrq, char *extra)
 {
@@ -786,7 +784,7 @@ static int p80211wext_giwrate(netdevice_t *dev,
 	msg.msgcode = DIDmsg_dot11req_mibget;
 	mibitem.did = DIDmib_p2_p2MAC_p2CurrentTxRate;
 	memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
-	result = p80211req_dorequest(wlandev, (u8 *)&msg);
+	result = p80211req_dorequest(wlandev, (u8 *) & msg);
 
 	if (result) {
 		err = -EFAULT;
@@ -824,7 +822,7 @@ exit:
 	return err;
 }
 
-static int p80211wext_giwrts(netdevice_t *dev,
+static int p80211wext_giwrts(netdevice_t * dev,
 			     struct iw_request_info *info,
 			     struct iw_param *rts, char *extra)
 {
@@ -837,7 +835,7 @@ static int p80211wext_giwrts(netdevice_t *dev,
 	msg.msgcode = DIDmsg_dot11req_mibget;
 	mibitem.did = DIDmib_dot11mac_dot11OperationTable_dot11RTSThreshold;
 	memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
-	result = p80211req_dorequest(wlandev, (u8 *)&msg);
+	result = p80211req_dorequest(wlandev, (u8 *) & msg);
 
 	if (result) {
 		err = -EFAULT;
@@ -854,7 +852,7 @@ exit:
 	return err;
 }
 
-static int p80211wext_siwrts(netdevice_t *dev,
+static int p80211wext_siwrts(netdevice_t * dev,
 			     struct iw_request_info *info,
 			     struct iw_param *rts, char *extra)
 {
@@ -877,7 +875,7 @@ static int p80211wext_siwrts(netdevice_t *dev,
 		mibitem.data = rts->value;
 
 	memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
-	result = p80211req_dorequest(wlandev, (u8 *)&msg);
+	result = p80211req_dorequest(wlandev, (u8 *) & msg);
 
 	if (result) {
 		err = -EFAULT;
@@ -888,7 +886,7 @@ exit:
 	return err;
 }
 
-static int p80211wext_giwfrag(netdevice_t *dev,
+static int p80211wext_giwfrag(netdevice_t * dev,
 			      struct iw_request_info *info,
 			      struct iw_param *frag, char *extra)
 {
@@ -902,7 +900,7 @@ static int p80211wext_giwfrag(netdevice_t *dev,
 	mibitem.did =
 	    DIDmib_dot11mac_dot11OperationTable_dot11FragmentationThreshold;
 	memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
-	result = p80211req_dorequest(wlandev, (u8 *)&msg);
+	result = p80211req_dorequest(wlandev, (u8 *) & msg);
 
 	if (result) {
 		err = -EFAULT;
@@ -919,7 +917,7 @@ exit:
 	return err;
 }
 
-static int p80211wext_siwfrag(netdevice_t *dev,
+static int p80211wext_siwfrag(netdevice_t * dev,
 			      struct iw_request_info *info,
 			      struct iw_param *frag, char *extra)
 {
@@ -944,7 +942,7 @@ static int p80211wext_siwfrag(netdevice_t *dev,
 		mibitem.data = frag->value;
 
 	memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
-	result = p80211req_dorequest(wlandev, (u8 *)&msg);
+	result = p80211req_dorequest(wlandev, (u8 *) & msg);
 
 	if (result) {
 		err = -EFAULT;
@@ -963,7 +961,7 @@ exit:
 #define IW_RETRY_SHORT IW_RETRY_MIN
 #endif
 
-static int p80211wext_giwretry(netdevice_t *dev,
+static int p80211wext_giwretry(netdevice_t * dev,
 			       struct iw_request_info *info,
 			       struct iw_param *rrq, char *extra)
 {
@@ -978,7 +976,7 @@ static int p80211wext_giwretry(netdevice_t *dev,
 	mibitem.did = DIDmib_dot11mac_dot11OperationTable_dot11ShortRetryLimit;
 
 	memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
-	result = p80211req_dorequest(wlandev, (u8 *)&msg);
+	result = p80211req_dorequest(wlandev, (u8 *) & msg);
 
 	if (result) {
 		err = -EFAULT;
@@ -992,7 +990,7 @@ static int p80211wext_giwretry(netdevice_t *dev,
 	mibitem.did = DIDmib_dot11mac_dot11OperationTable_dot11LongRetryLimit;
 
 	memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
-	result = p80211req_dorequest(wlandev, (u8 *)&msg);
+	result = p80211req_dorequest(wlandev, (u8 *) & msg);
 
 	if (result) {
 		err = -EFAULT;
@@ -1007,7 +1005,7 @@ static int p80211wext_giwretry(netdevice_t *dev,
 	    DIDmib_dot11mac_dot11OperationTable_dot11MaxTransmitMSDULifetime;
 
 	memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
-	result = p80211req_dorequest(wlandev, (u8 *)&msg);
+	result = p80211req_dorequest(wlandev, (u8 *) & msg);
 
 	if (result) {
 		err = -EFAULT;
@@ -1040,7 +1038,7 @@ exit:
 
 }
 
-static int p80211wext_siwretry(netdevice_t *dev,
+static int p80211wext_siwretry(netdevice_t * dev,
 			       struct iw_request_info *info,
 			       struct iw_param *rrq, char *extra)
 {
@@ -1068,7 +1066,7 @@ static int p80211wext_siwretry(netdevice_t *dev,
 		mibitem.data = rrq->value /= 1024;
 
 		memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
-		result = p80211req_dorequest(wlandev, (u8 *)&msg);
+		result = p80211req_dorequest(wlandev, (u8 *) & msg);
 
 		if (result) {
 			err = -EFAULT;
@@ -1082,7 +1080,7 @@ static int p80211wext_siwretry(netdevice_t *dev,
 
 			memcpy(&msg.mibattribute.data, &mibitem,
 			       sizeof(mibitem));
-			result = p80211req_dorequest(wlandev, (u8 *)&msg);
+			result = p80211req_dorequest(wlandev, (u8 *) & msg);
 
 			if (result) {
 				err = -EFAULT;
@@ -1097,7 +1095,7 @@ static int p80211wext_siwretry(netdevice_t *dev,
 
 			memcpy(&msg.mibattribute.data, &mibitem,
 			       sizeof(mibitem));
-			result = p80211req_dorequest(wlandev, (u8 *)&msg);
+			result = p80211req_dorequest(wlandev, (u8 *) & msg);
 
 			if (result) {
 				err = -EFAULT;
@@ -1111,7 +1109,7 @@ exit:
 
 }
 
-static int p80211wext_siwtxpow(netdevice_t *dev,
+static int p80211wext_siwtxpow(netdevice_t * dev,
 			       struct iw_request_info *info,
 			       struct iw_param *rrq, char *extra)
 {
@@ -1134,7 +1132,7 @@ static int p80211wext_siwtxpow(netdevice_t *dev,
 	else
 		mibitem.data = rrq->value;
 	memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
-	result = p80211req_dorequest(wlandev, (u8 *)&msg);
+	result = p80211req_dorequest(wlandev, (u8 *) & msg);
 
 	if (result) {
 		err = -EFAULT;
@@ -1145,7 +1143,7 @@ exit:
 	return err;
 }
 
-static int p80211wext_giwtxpow(netdevice_t *dev,
+static int p80211wext_giwtxpow(netdevice_t * dev,
 			       struct iw_request_info *info,
 			       struct iw_param *rrq, char *extra)
 {
@@ -1160,7 +1158,7 @@ static int p80211wext_giwtxpow(netdevice_t *dev,
 	    DIDmib_dot11phy_dot11PhyTxPowerTable_dot11CurrentTxPowerLevel;
 
 	memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
-	result = p80211req_dorequest(wlandev, (u8 *)&msg);
+	result = p80211req_dorequest(wlandev, (u8 *) & msg);
 
 	if (result) {
 		err = -EFAULT;
@@ -1180,7 +1178,7 @@ exit:
 	return err;
 }
 
-static int p80211wext_siwspy(netdevice_t *dev,
+static int p80211wext_siwspy(netdevice_t * dev,
 			     struct iw_request_info *info,
 			     struct iw_point *srq, char *extra)
 {
@@ -1215,7 +1213,7 @@ static int p80211wext_siwspy(netdevice_t *dev,
 }
 
 /* jkriegl: from orinoco, modified */
-static int p80211wext_giwspy(netdevice_t *dev,
+static int p80211wext_giwspy(netdevice_t * dev,
 			     struct iw_request_info *info,
 			     struct iw_point *srq, char *extra)
 {
@@ -1275,7 +1273,7 @@ static int prism2_result2err(int prism2_result)
 	return err;
 }
 
-static int p80211wext_siwscan(netdevice_t *dev,
+static int p80211wext_siwscan(netdevice_t * dev,
 			      struct iw_request_info *info,
 			      struct iw_point *srq, char *extra)
 {
@@ -1308,7 +1306,7 @@ static int p80211wext_siwscan(netdevice_t *dev,
 	msg.maxchanneltime.data = 250;
 	msg.minchanneltime.data = 200;
 
-	result = p80211req_dorequest(wlandev, (u8 *)&msg);
+	result = p80211req_dorequest(wlandev, (u8 *) & msg);
 	if (result)
 		err = prism2_result2err(msg.resultcode.data);
 
@@ -1322,7 +1320,7 @@ exit:
  */
 static char *wext_translate_bss(struct iw_request_info *info, char *current_ev,
 				char *end_buf,
-				p80211msg_dot11req_scan_results_t *bss)
+				p80211msg_dot11req_scan_results_t * bss)
 {
 	struct iw_event iwe;	/* Temporary buffer */
 
@@ -1406,7 +1404,7 @@ static char *wext_translate_bss(struct iw_request_info *info, char *current_ev,
 	return current_ev;
 }
 
-static int p80211wext_giwscan(netdevice_t *dev,
+static int p80211wext_giwscan(netdevice_t * dev,
 			      struct iw_request_info *info,
 			      struct iw_point *srq, char *extra)
 {
@@ -1427,7 +1425,7 @@ static int p80211wext_giwscan(netdevice_t *dev,
 		msg.msgcode = DIDmsg_dot11req_scan_results;
 		msg.bssindex.data = i;
 
-		result = p80211req_dorequest(wlandev, (u8 *)&msg);
+		result = p80211req_dorequest(wlandev, (u8 *) & msg);
 		if ((result != 0) ||
 		    (msg.resultcode.data != P80211ENUM_resultcode_success)) {
 			break;
@@ -1466,7 +1464,7 @@ static int p80211wext_set_encodeext(struct net_device *dev,
 	int idx = encoding->flags & IW_ENCODE_INDEX;
 
 	pr_debug("set_encode_ext flags[%d] alg[%d] keylen[%d]\n",
-	       ext->ext_flags, (int)ext->alg, (int)ext->key_len);
+		 ext->ext_flags, (int)ext->alg, (int)ext->key_len);
 
 	if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) {
 		/* set default key ? I'm not sure if this the the correct thing to do here */
@@ -1487,8 +1485,8 @@ static int p80211wext_set_encodeext(struct net_device *dev,
 	}
 
 	if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
-		if (!(ext->alg & IW_ENCODE_ALG_WEP)) {
-			pr_debug("asked to set a non wep key :(");
+		if (ext->alg != IW_ENCODE_ALG_WEP) {
+			pr_debug("asked to set a non wep key :(\n");
 			return -EINVAL;
 		}
 		if (idx) {
@@ -1502,7 +1500,7 @@ static int p80211wext_set_encodeext(struct net_device *dev,
 		memcpy(wlandev->wep_keys[idx], ext->key, ext->key_len);
 
 		memset(&msg, 0, sizeof(msg));
-		pstr = (p80211item_pstr32_t *)&msg.mibattribute.data;
+		pstr = (p80211item_pstr32_t *) & msg.mibattribute.data;
 		memcpy(pstr->data.data, ext->key, ext->key_len);
 		pstr->data.len = ext->key_len;
 		switch (idx) {
@@ -1526,7 +1524,7 @@ static int p80211wext_set_encodeext(struct net_device *dev,
 			break;
 		}
 		msg.msgcode = DIDmsg_dot11req_mibset;
-		result = p80211req_dorequest(wlandev, (u8 *)&msg);
+		result = p80211req_dorequest(wlandev, (u8 *) & msg);
 		pr_debug("result (%d)\n", result);
 	}
 	return result;
@@ -1546,12 +1544,11 @@ static int p80211wext_get_encodeext(struct net_device *dev,
 	int idx;
 
 	pr_debug("get_encode_ext flags[%d] alg[%d] keylen[%d]\n",
-	       ext->ext_flags, (int)ext->alg, (int)ext->key_len);
+		 ext->ext_flags, (int)ext->alg, (int)ext->key_len);
 
 	max_len = encoding->length - sizeof(*ext);
 	if (max_len <= 0) {
-		pr_debug("get_encodeext max_len [%d] invalid\n",
-		       max_len);
+		pr_debug("get_encodeext max_len [%d] invalid\n", max_len);
 		result = -EINVAL;
 		goto exit;
 	}
@@ -1561,8 +1558,8 @@ static int p80211wext_get_encodeext(struct net_device *dev,
 
 	if (idx) {
 		if (idx < 1 || idx > NUM_WEPKEYS) {
-			printk(KERN_DEBUG
-			       "get_encode_ext invalid key index [%d]\n", idx);
+			pr_debug("get_encode_ext invalid key index [%d]\n",
+				 idx);
 			result = -EINVAL;
 			goto exit;
 		}
@@ -1593,8 +1590,7 @@ static int p80211_wext_set_iwauth(struct net_device *dev,
 	struct iw_param *param = &wrqu->param;
 	int result = 0;
 
-	pr_debug("set_iwauth flags[%d]\n",
-	       (int)param->flags & IW_AUTH_INDEX);
+	pr_debug("set_iwauth flags[%d]\n", (int)param->flags & IW_AUTH_INDEX);
 
 	switch (param->flags & IW_AUTH_INDEX) {
 	case IW_AUTH_DROP_UNENCRYPTED:
@@ -1635,8 +1631,7 @@ static int p80211_wext_set_iwauth(struct net_device *dev,
 			wlandev->hostwep |= HOSTWEP_SHAREDKEY;
 		} else {
 			/* don't know what to do know  */
-			pr_debug("unknown AUTH_ALG (%d)\n",
-			       param->value);
+			pr_debug("unknown AUTH_ALG (%d)\n", param->value);
 			result = -EINVAL;
 		}
 		break;
@@ -1657,8 +1652,7 @@ static int p80211_wext_get_iwauth(struct net_device *dev,
 	struct iw_param *param = &wrqu->param;
 	int result = 0;
 
-	pr_debug("get_iwauth flags[%d]\n",
-	       (int)param->flags & IW_AUTH_INDEX);
+	pr_debug("get_iwauth flags[%d]\n", (int)param->flags & IW_AUTH_INDEX);
 
 	switch (param->flags & IW_AUTH_INDEX) {
 	case IW_AUTH_DROP_UNENCRYPTED:
@@ -1673,9 +1667,8 @@ static int p80211_wext_get_iwauth(struct net_device *dev,
 
 	case IW_AUTH_80211_AUTH_ALG:
 		param->value =
-		    wlandev->
-		    hostwep & HOSTWEP_SHAREDKEY ? IW_AUTH_ALG_SHARED_KEY :
-		    IW_AUTH_ALG_OPEN_SYSTEM;
+		    wlandev->hostwep & HOSTWEP_SHAREDKEY ?
+		    IW_AUTH_ALG_SHARED_KEY : IW_AUTH_ALG_OPEN_SYSTEM;
 		break;
 
 	default:
@@ -1755,7 +1748,7 @@ struct iw_handler_def p80211wext_handler_def = {
 	.get_wireless_stats = p80211wext_get_wireless_stats
 };
 
-int p80211wext_event_associated(wlandevice_t *wlandev, int assoc)
+int p80211wext_event_associated(wlandevice_t * wlandev, int assoc)
 {
 	union iwreq_data data;
 
diff --git a/drivers/staging/wlan-ng/prism2fw.c b/drivers/staging/wlan-ng/prism2fw.c
new file mode 100644
index 00000000000..608b234b6a4
--- /dev/null
+++ b/drivers/staging/wlan-ng/prism2fw.c
@@ -0,0 +1,1406 @@
+/* from src/prism2/download/prism2dl.c
+*
+* utility for downloading prism2 images moved into kernelspace
+*
+* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*
+* Inquiries regarding the linux-wlan Open Source project can be
+* made directly to:
+*
+* AbsoluteValue Systems Inc.
+* info@linux-wlan.com
+* http://www.linux-wlan.com
+*
+* --------------------------------------------------------------------
+*
+* Portions of the development of this software were funded by
+* Intersil Corporation as part of PRISM(R) chipset product development.
+*
+* --------------------------------------------------------------------
+*/
+
+/*================================================================*/
+/* System Includes */
+#include <linux/sort.h>
+#include <linux/firmware.h>
+
+/*================================================================*/
+/* Local Constants */
+
+#define PRISM2_USB_FWFILE	"prism2_ru.hex"
+
+#define S3DATA_MAX		5000
+#define S3PLUG_MAX		200
+#define S3CRC_MAX		200
+#define S3INFO_MAX		50
+#define SREC_LINE_MAX		264
+#define S3LEN_TXTOFFSET		2
+#define S3LEN_TXTLEN		2
+#define S3ADDR_TXTOFFSET	4
+#define S3ADDR_TXTLEN		8
+#define S3DATA_TXTOFFSET	12
+/*S3DATA_TXTLEN			variable, depends on len field */
+/*S3CKSUM_TXTOFFSET		variable, depends on len field */
+#define S3CKSUM_TXTLEN		2
+#define SERNUM_LEN_MAX		12
+
+#define S3PLUG_ITEMCODE_TXTOFFSET	(S3DATA_TXTOFFSET)
+#define S3PLUG_ITEMCODE_TXTLEN		8
+#define S3PLUG_ADDR_TXTOFFSET		(S3DATA_TXTOFFSET+8)
+#define S3PLUG_ADDR_TXTLEN		8
+#define S3PLUG_LEN_TXTOFFSET		(S3DATA_TXTOFFSET+16)
+#define S3PLUG_LEN_TXTLEN		8
+
+#define S3CRC_ADDR_TXTOFFSET		(S3DATA_TXTOFFSET)
+#define S3CRC_ADDR_TXTLEN		8
+#define S3CRC_LEN_TXTOFFSET		(S3DATA_TXTOFFSET+8)
+#define S3CRC_LEN_TXTLEN		8
+#define S3CRC_DOWRITE_TXTOFFSET		(S3DATA_TXTOFFSET+16)
+#define S3CRC_DOWRITE_TXTLEN		8
+
+#define S3INFO_LEN_TXTOFFSET		(S3DATA_TXTOFFSET)
+#define S3INFO_LEN_TXTLEN		4
+#define S3INFO_TYPE_TXTOFFSET		(S3DATA_TXTOFFSET+4)
+#define S3INFO_TYPE_TXTLEN		4
+#define S3INFO_DATA_TXTOFFSET		(S3DATA_TXTOFFSET+8)
+/* S3INFO_DATA_TXTLEN			variable, depends on INFO_LEN field */
+
+#define S3ADDR_PLUG		(0xff000000UL)
+#define S3ADDR_CRC		(0xff100000UL)
+#define S3ADDR_INFO		(0xff200000UL)
+
+#define PDAFILE_LINE_MAX	1024
+
+#define CHUNKS_MAX		100
+
+#define WRITESIZE_MAX		4096
+
+/*================================================================*/
+/* Local Macros */
+
+#define bswap_16(x) \
+     (__extension__							      \
+      ({ register unsigned short int __v, __x = (x);			      \
+	   __asm__ ("rorw $8, %w0"					      \
+		    : "=r" (__v)					      \
+		    : "0" (__x)						      \
+		    : "cc");						      \
+	 __v; }))
+
+#define bswap_32(x) \
+     (__extension__							      \
+      ({ register unsigned int __v, __x = (x);				      \
+	   __asm__ ("rorw $8, %w0;"					      \
+		    "rorl $16, %0;"					      \
+		    "rorw $8, %w0"					      \
+		    : "=r" (__v)					      \
+		    : "0" (__x)						      \
+		    : "cc");						      \
+	 __v; }))
+
+/*================================================================*/
+/* Local Types */
+
+typedef struct s3datarec {
+	u32 len;
+	u32 addr;
+	u8 checksum;
+	u8 *data;
+} s3datarec_t;
+
+typedef struct s3plugrec {
+	u32 itemcode;
+	u32 addr;
+	u32 len;
+} s3plugrec_t;
+
+typedef struct s3crcrec {
+	u32 addr;
+	u32 len;
+	unsigned int dowrite;
+} s3crcrec_t;
+
+typedef struct s3inforec {
+	u16 len;
+	u16 type;
+	union {
+		hfa384x_compident_t version;
+		hfa384x_caplevel_t compat;
+		u16 buildseq;
+		hfa384x_compident_t platform;
+	} info;
+} s3inforec_t;
+
+typedef struct pda {
+	u8 buf[HFA384x_PDA_LEN_MAX];
+	hfa384x_pdrec_t *rec[HFA384x_PDA_RECS_MAX];
+	unsigned int nrec;
+} pda_t;
+
+typedef struct imgchunk {
+	u32 addr;		/* start address */
+	u32 len;		/* in bytes */
+	u16 crc;		/* CRC value (if it falls at a chunk boundary) */
+	u8 *data;
+} imgchunk_t;
+
+/*================================================================*/
+/* Local Static Definitions */
+
+/*----------------------------------------------------------------*/
+/* s-record image processing */
+
+/* Data records */
+unsigned int ns3data = 0;
+s3datarec_t s3data[S3DATA_MAX];
+
+/* Plug records */
+unsigned int ns3plug = 0;
+s3plugrec_t s3plug[S3PLUG_MAX];
+
+/* CRC records */
+unsigned int ns3crc = 0;
+s3crcrec_t s3crc[S3CRC_MAX];
+
+/* Info records */
+unsigned int ns3info = 0;
+s3inforec_t s3info[S3INFO_MAX];
+
+/* S7 record (there _better_ be only one) */
+u32 startaddr;
+
+/* Load image chunks */
+unsigned int nfchunks;
+imgchunk_t fchunk[CHUNKS_MAX];
+
+/* Note that for the following pdrec_t arrays, the len and code */
+/*   fields are stored in HOST byte order. The mkpdrlist() function */
+/*   does the conversion.  */
+/*----------------------------------------------------------------*/
+/* PDA, built from [card|newfile]+[addfile1+addfile2...] */
+
+pda_t pda;
+hfa384x_compident_t nicid;
+hfa384x_caplevel_t rfid;
+hfa384x_caplevel_t macid;
+hfa384x_caplevel_t priid;
+
+/*================================================================*/
+/* Local Function Declarations */
+
+int prism2_fwapply(char *rfptr, int rfsize, wlandevice_t * wlandev);
+int read_srecfile(char *rfptr, int rfsize);
+int mkimage(imgchunk_t * clist, unsigned int *ccnt);
+int read_cardpda(pda_t * pda, wlandevice_t * wlandev);
+int mkpdrlist(pda_t * pda);
+int s3datarec_compare(const void *p1, const void *p2);
+int plugimage(imgchunk_t * fchunk, unsigned int nfchunks,
+	      s3plugrec_t * s3plug, unsigned int ns3plug, pda_t * pda);
+int crcimage(imgchunk_t * fchunk, unsigned int nfchunks,
+	     s3crcrec_t * s3crc, unsigned int ns3crc);
+int writeimage(wlandevice_t * wlandev, imgchunk_t * fchunk,
+	       unsigned int nfchunks);
+void free_chunks(imgchunk_t * fchunk, unsigned int *nfchunks);
+void free_srecs(void);
+
+int validate_identity(void);
+
+/*================================================================*/
+/* Function Definitions */
+
+/*----------------------------------------------------------------
+* prism2_fwtry
+*
+* Try and get firmware into memory
+*
+* Arguments:
+*	udev	usb device structure
+*	wlandev wlan device structure
+*
+* Returns:
+*	0	- success
+*	~0	- failure
+----------------------------------------------------------------*/
+int prism2_fwtry(struct usb_device *udev, wlandevice_t * wlandev)
+{
+	const struct firmware *fw_entry = NULL;
+
+	printk(KERN_INFO "prism2_usb: Checking for firmware %s\n",
+	       PRISM2_USB_FWFILE);
+	if (request_firmware(&fw_entry, PRISM2_USB_FWFILE, &udev->dev) != 0) {
+		printk(KERN_INFO
+		       "prism2_usb: Firmware not available, but not essential\n");
+		printk(KERN_INFO
+		       "prism2_usb: can continue to use card anyway.\n");
+		return 1;
+	}
+
+	printk(KERN_INFO "prism2_usb: %s will be processed, size %d\n",
+	       PRISM2_USB_FWFILE, fw_entry->size);
+	prism2_fwapply((char *)fw_entry->data, fw_entry->size, wlandev);
+
+	release_firmware(fw_entry);
+	return 0;
+}
+
+/*----------------------------------------------------------------
+* prism2_fwapply
+*
+* Apply the firmware loaded into memory
+*
+* Arguments:
+*	rfptr	firmware image in kernel memory
+*	rfsize	firmware size in kernel memory
+*	wlandev device
+*
+* Returns:
+*	0	- success
+*	~0	- failure
+----------------------------------------------------------------*/
+int prism2_fwapply(char *rfptr, int rfsize, wlandevice_t * wlandev)
+{
+	signed int result = 0;
+	p80211msg_dot11req_mibget_t getmsg;
+	p80211itemd_t *item;
+	u32 *data;
+
+	/* Initialize the data structures */
+	ns3data = 0;
+	memset(s3data, 0, sizeof(s3data));
+	ns3plug = 0;
+	memset(s3plug, 0, sizeof(s3plug));
+	ns3crc = 0;
+	memset(s3crc, 0, sizeof(s3crc));
+	ns3info = 0;
+	memset(s3info, 0, sizeof(s3info));
+	startaddr = 0;
+
+	nfchunks = 0;
+	memset(fchunk, 0, sizeof(fchunk));
+	memset(&nicid, 0, sizeof(nicid));
+	memset(&rfid, 0, sizeof(rfid));
+	memset(&macid, 0, sizeof(macid));
+	memset(&priid, 0, sizeof(priid));
+
+	/* clear the pda and add an initial END record */
+	memset(&pda, 0, sizeof(pda));
+	pda.rec[0] = (hfa384x_pdrec_t *) pda.buf;
+	pda.rec[0]->len = cpu_to_le16(2);	/* len in words *//* len in words */
+	pda.rec[0]->code = cpu_to_le16(HFA384x_PDR_END_OF_PDA);
+	pda.nrec = 1;
+
+	/*-----------------------------------------------------*/
+	/* Put card into fwload state */
+	prism2sta_ifstate(wlandev, P80211ENUM_ifstate_fwload);
+
+	/* Build the PDA we're going to use. */
+	if (read_cardpda(&pda, wlandev)) {
+		printk(KERN_ERR "load_cardpda failed, exiting.\n");
+		return (1);
+	}
+
+	/* read the card's PRI-SUP */
+	memset(&getmsg, 0, sizeof(getmsg));
+	getmsg.msgcode = DIDmsg_dot11req_mibget;
+	getmsg.msglen = sizeof(getmsg);
+	strcpy(getmsg.devname, wlandev->name);
+
+	getmsg.mibattribute.did = DIDmsg_dot11req_mibget_mibattribute;
+	getmsg.mibattribute.status = P80211ENUM_msgitem_status_data_ok;
+	getmsg.resultcode.did = DIDmsg_dot11req_mibget_resultcode;
+	getmsg.resultcode.status = P80211ENUM_msgitem_status_no_value;
+
+	item = (p80211itemd_t *) getmsg.mibattribute.data;
+	item->did = DIDmib_p2_p2NIC_p2PRISupRange;
+	item->status = P80211ENUM_msgitem_status_no_value;
+
+	data = (u32 *) item->data;
+
+	/* DIDmsg_dot11req_mibget */
+	prism2mgmt_mibset_mibget(wlandev, &getmsg);
+	if (getmsg.resultcode.data != P80211ENUM_resultcode_success) {
+		printk(KERN_ERR "Couldn't fetch PRI-SUP info\n");
+	}
+
+	/* Already in host order */
+	priid.role = *data++;
+	priid.id = *data++;
+	priid.variant = *data++;
+	priid.bottom = *data++;
+	priid.top = *data++;
+
+	/* Read the S3 file */
+	result = read_srecfile(rfptr, rfsize);
+	if (result) {
+		printk(KERN_ERR "Failed to read the data exiting.\n");
+		return (1);
+	}
+	/* Sort the S3 data records */
+	sort(s3data, ns3data, sizeof(s3datarec_t), s3datarec_compare, NULL);
+
+	result = validate_identity();
+
+	if (result) {
+		printk(KERN_ERR "Incompatible firmware image.\n");
+		return (1);
+	}
+
+	if (startaddr == 0x00000000) {
+		printk(KERN_ERR "Can't RAM download a Flash image!\n");
+		return (1);
+	}
+
+	/* Make the image chunks */
+	result = mkimage(fchunk, &nfchunks);
+
+	/* Do any plugging */
+	result = plugimage(fchunk, nfchunks, s3plug, ns3plug, &pda);
+	if (result) {
+		printk(KERN_ERR "Failed to plug data.\n");
+		return (1);
+	}
+
+	/* Insert any CRCs */
+	if (crcimage(fchunk, nfchunks, s3crc, ns3crc)) {
+		printk(KERN_ERR "Failed to insert all CRCs\n");
+		return (1);
+	}
+
+	/* Write the image */
+	result = writeimage(wlandev, fchunk, nfchunks);
+	if (result) {
+		printk(KERN_ERR "Failed to ramwrite image data.\n");
+		return (1);
+	}
+
+	/* clear any allocated memory */
+	free_chunks(fchunk, &nfchunks);
+	free_srecs();
+
+	printk(KERN_INFO "prism2_usb: firmware loading finished.\n");
+
+	return result;
+}
+
+/*----------------------------------------------------------------
+* crcimage
+*
+* Adds a CRC16 in the two bytes prior to each block identified by
+* an S3 CRC record.  Currently, we don't actually do a CRC we just
+* insert the value 0xC0DE in hfa384x order.
+*
+* Arguments:
+*	fchunk		Array of image chunks
+*	nfchunks	Number of image chunks
+*	s3crc		Array of crc records
+*	ns3crc		Number of crc records
+*
+* Returns:
+*	0	success
+*	~0	failure
+----------------------------------------------------------------*/
+int crcimage(imgchunk_t * fchunk, unsigned int nfchunks, s3crcrec_t * s3crc,
+	     unsigned int ns3crc)
+{
+	int result = 0;
+	int i;
+	int c;
+	u32 crcstart;
+	u32 crcend;
+	u32 cstart = 0;
+	u32 cend;
+	u8 *dest;
+	u32 chunkoff;
+
+	for (i = 0; i < ns3crc; i++) {
+		if (!s3crc[i].dowrite)
+			continue;
+		crcstart = s3crc[i].addr;
+		crcend = s3crc[i].addr + s3crc[i].len;
+		/* Find chunk */
+		for (c = 0; c < nfchunks; c++) {
+			cstart = fchunk[c].addr;
+			cend = fchunk[c].addr + fchunk[c].len;
+			/*  the line below does an address & len match search */
+			/*  unfortunately, I've found that the len fields of */
+			/*  some crc records don't match with the length of */
+			/*  the actual data, so we're not checking right */
+			/*  now */
+			/* if ( crcstart-2 >= cstart && crcend <= cend ) break; */
+
+			/* note the -2 below, it's to make sure the chunk has */
+			/*   space for the CRC value */
+			if (crcstart - 2 >= cstart && crcstart < cend)
+				break;
+		}
+		if (c >= nfchunks) {
+			printk(KERN_ERR
+			       "Failed to find chunk for "
+			       "crcrec[%d], addr=0x%06x len=%d , "
+			       "aborting crc.\n",
+			       i, s3crc[i].addr, s3crc[i].len);
+			return 1;
+		}
+
+		/* Insert crc */
+		pr_debug("Adding crc @ 0x%06x\n", s3crc[i].addr - 2);
+		chunkoff = crcstart - cstart - 2;
+		dest = fchunk[c].data + chunkoff;
+		*dest = 0xde;
+		*(dest + 1) = 0xc0;
+
+	}
+	return result;
+}
+
+/*----------------------------------------------------------------
+* free_chunks
+*
+* Clears the chunklist data structures in preparation for a new file.
+*
+* Arguments:
+*	none
+*
+* Returns:
+*	nothing
+----------------------------------------------------------------*/
+void free_chunks(imgchunk_t * fchunk, unsigned int *nfchunks)
+{
+	int i;
+	for (i = 0; i < *nfchunks; i++) {
+		if (fchunk[i].data != NULL) {
+			kfree(fchunk[i].data);
+		}
+	}
+	*nfchunks = 0;
+	memset(fchunk, 0, sizeof(fchunk));
+
+}
+
+/*----------------------------------------------------------------
+* free_srecs
+*
+* Clears the srec data structures in preparation for a new file.
+*
+* Arguments:
+*	none
+*
+* Returns:
+*	nothing
+----------------------------------------------------------------*/
+void free_srecs(void)
+{
+	int i;
+	for (i = 0; i < ns3data; i++) {
+		kfree(s3data[i].data);
+	}
+	ns3data = 0;
+	memset(s3data, 0, sizeof(s3data));
+	ns3plug = 0;
+	memset(s3plug, 0, sizeof(s3plug));
+	ns3crc = 0;
+	memset(s3crc, 0, sizeof(s3crc));
+	ns3info = 0;
+	memset(s3info, 0, sizeof(s3info));
+	startaddr = 0;
+}
+
+/*----------------------------------------------------------------
+* mkimage
+*
+* Scans the currently loaded set of S records for data residing
+* in contiguous memory regions.  Each contiguous region is then
+* made into a 'chunk'.  This function assumes that we're building
+* a new chunk list.  Assumes the s3data items are in sorted order.
+*
+* Arguments:	none
+*
+* Returns:
+*	0	- success
+*	~0	- failure (probably an errno)
+----------------------------------------------------------------*/
+int mkimage(imgchunk_t * clist, unsigned int *ccnt)
+{
+	int result = 0;
+	int i;
+	int j;
+	int currchunk = 0;
+	u32 nextaddr = 0;
+	u32 s3start;
+	u32 s3end;
+	u32 cstart = 0;
+	u32 cend;
+	u32 coffset;
+
+	/* There may already be data in the chunklist */
+	*ccnt = 0;
+
+	/* Establish the location and size of each chunk */
+	for (i = 0; i < ns3data; i++) {
+		if (s3data[i].addr == nextaddr) {
+			/* existing chunk, grow it */
+			clist[currchunk].len += s3data[i].len;
+			nextaddr += s3data[i].len;
+		} else {
+			/* New chunk */
+			(*ccnt)++;
+			currchunk = *ccnt - 1;
+			clist[currchunk].addr = s3data[i].addr;
+			clist[currchunk].len = s3data[i].len;
+			nextaddr = s3data[i].addr + s3data[i].len;
+			/* Expand the chunk if there is a CRC record at */
+			/* their beginning bound */
+			for (j = 0; j < ns3crc; j++) {
+				if (s3crc[j].dowrite &&
+				    s3crc[j].addr == clist[currchunk].addr) {
+					clist[currchunk].addr -= 2;
+					clist[currchunk].len += 2;
+				}
+			}
+		}
+	}
+
+	/* We're currently assuming there aren't any overlapping chunks */
+	/*  if this proves false, we'll need to add code to coalesce. */
+
+	/* Allocate buffer space for chunks */
+	for (i = 0; i < *ccnt; i++) {
+		clist[i].data = kmalloc(clist[i].len, GFP_KERNEL);
+		if (clist[i].data == NULL) {
+			printk(KERN_ERR
+			       "failed to allocate image space, exitting.\n");
+			return (1);
+		}
+		memset(clist[i].data, 0, clist[i].len);
+	}
+
+	/* Display chunks */
+	for (i = 0; i < *ccnt; i++) {
+		pr_debug("chunk[%d]: addr=0x%06x len=%d\n",
+			 i, clist[i].addr, clist[i].len);
+	}
+
+	/* Copy srec data to chunks */
+	for (i = 0; i < ns3data; i++) {
+		s3start = s3data[i].addr;
+		s3end = s3start + s3data[i].len - 1;
+		for (j = 0; j < *ccnt; j++) {
+			cstart = clist[j].addr;
+			cend = cstart + clist[j].len - 1;
+			if (s3start >= cstart && s3end <= cend) {
+				break;
+			}
+		}
+		if (((unsigned int)j) >= (*ccnt)) {
+			printk(KERN_ERR
+			       "s3rec(a=0x%06x,l=%d), no chunk match, exiting.\n",
+			       s3start, s3data[i].len);
+			return (1);
+		}
+		coffset = s3start - cstart;
+		memcpy(clist[j].data + coffset, s3data[i].data, s3data[i].len);
+	}
+
+	return result;
+}
+
+/*----------------------------------------------------------------
+* mkpdrlist
+*
+* Reads a raw PDA and builds an array of pdrec_t structures.
+*
+* Arguments:
+*	pda	buffer containing raw PDA bytes
+*	pdrec	ptr to an array of pdrec_t's.  Will be filled on exit.
+*	nrec	ptr to a variable that will contain the count of PDRs
+*
+* Returns:
+*	0	- success
+*	~0	- failure (probably an errno)
+----------------------------------------------------------------*/
+int mkpdrlist(pda_t * pda)
+{
+	int result = 0;
+	u16 *pda16 = (u16 *) pda->buf;
+	int curroff;		/* in 'words' */
+
+	pda->nrec = 0;
+	curroff = 0;
+	while (curroff < (HFA384x_PDA_LEN_MAX / 2) &&
+	       le16_to_cpu(pda16[curroff + 1]) != HFA384x_PDR_END_OF_PDA) {
+		pda->rec[pda->nrec] = (hfa384x_pdrec_t *) & (pda16[curroff]);
+
+		if (le16_to_cpu(pda->rec[pda->nrec]->code) == HFA384x_PDR_NICID) {
+			memcpy(&nicid, &pda->rec[pda->nrec]->data.nicid,
+			       sizeof(nicid));
+			nicid.id = le16_to_cpu(nicid.id);
+			nicid.variant = le16_to_cpu(nicid.variant);
+			nicid.major = le16_to_cpu(nicid.major);
+			nicid.minor = le16_to_cpu(nicid.minor);
+		}
+		if (le16_to_cpu(pda->rec[pda->nrec]->code) ==
+		    HFA384x_PDR_MFISUPRANGE) {
+			memcpy(&rfid, &pda->rec[pda->nrec]->data.mfisuprange,
+			       sizeof(rfid));
+			rfid.id = le16_to_cpu(rfid.id);
+			rfid.variant = le16_to_cpu(rfid.variant);
+			rfid.bottom = le16_to_cpu(rfid.bottom);
+			rfid.top = le16_to_cpu(rfid.top);
+		}
+		if (le16_to_cpu(pda->rec[pda->nrec]->code) ==
+		    HFA384x_PDR_CFISUPRANGE) {
+			memcpy(&macid, &pda->rec[pda->nrec]->data.cfisuprange,
+			       sizeof(macid));
+			macid.id = le16_to_cpu(macid.id);
+			macid.variant = le16_to_cpu(macid.variant);
+			macid.bottom = le16_to_cpu(macid.bottom);
+			macid.top = le16_to_cpu(macid.top);
+		}
+
+		(pda->nrec)++;
+		curroff += le16_to_cpu(pda16[curroff]) + 1;
+
+	}
+	if (curroff >= (HFA384x_PDA_LEN_MAX / 2)) {
+		printk(KERN_ERR
+		       "no end record found or invalid lengths in "
+		       "PDR data, exiting. %x %d\n", curroff, pda->nrec);
+		return (1);
+	}
+	if (le16_to_cpu(pda16[curroff + 1]) == HFA384x_PDR_END_OF_PDA) {
+		pda->rec[pda->nrec] = (hfa384x_pdrec_t *) & (pda16[curroff]);
+		(pda->nrec)++;
+	}
+	return result;
+}
+
+/*----------------------------------------------------------------
+* plugimage
+*
+* Plugs the given image using the given plug records from the given
+* PDA and filename.
+*
+* Arguments:
+*	fchunk		Array of image chunks
+*	nfchunks	Number of image chunks
+*	s3plug		Array of plug records
+*	ns3plug		Number of plug records
+*	pda		Current pda data
+*
+* Returns:
+*	0	success
+*	~0	failure
+----------------------------------------------------------------*/
+int plugimage(imgchunk_t * fchunk, unsigned int nfchunks,
+	      s3plugrec_t * s3plug, unsigned int ns3plug, pda_t * pda)
+{
+	int result = 0;
+	int i;			/* plug index */
+	int j;			/* index of PDR or -1 if fname plug */
+	int c;			/* chunk index */
+	u32 pstart;
+	u32 pend;
+	u32 cstart = 0;
+	u32 cend;
+	u32 chunkoff;
+	u8 *dest;
+
+	/* for each plug record */
+	for (i = 0; i < ns3plug; i++) {
+		pstart = s3plug[i].addr;
+		pend = s3plug[i].addr + s3plug[i].len;
+		/* find the matching PDR (or filename) */
+		if (s3plug[i].itemcode != 0xffffffffUL) {	/* not filename */
+			for (j = 0; j < pda->nrec; j++) {
+				if (s3plug[i].itemcode ==
+				    le16_to_cpu(pda->rec[j]->code))
+					break;
+			}
+		} else {
+			j = -1;
+		}
+		if (j >= pda->nrec && j != -1) {	/*  if no matching PDR, fail */
+			printk(KERN_WARNING
+			       "warning: Failed to find PDR for "
+			       "plugrec 0x%04x.\n", s3plug[i].itemcode);
+			continue;	/* and move on to the next PDR */
+#if 0
+			/* MSM: They swear that unless it's the MAC address,
+			 * the serial number, or the TX calibration records,
+			 * then there's reasonable defaults in the f/w
+			 * image.  Therefore, missing PDRs in the card
+			 * should only be a warning, not fatal.
+			 * TODO: add fatals for the PDRs mentioned above.
+			 */
+			result = 1;
+			continue;
+#endif
+		}
+
+		/* Validate plug len against PDR len */
+		if (j != -1 && s3plug[i].len < le16_to_cpu(pda->rec[j]->len)) {
+			printk(KERN_ERR
+			       "error: Plug vs. PDR len mismatch for "
+			       "plugrec 0x%04x, abort plugging.\n",
+			       s3plug[i].itemcode);
+			result = 1;
+			continue;
+		}
+
+		/* Validate plug address against chunk data and identify chunk */
+		for (c = 0; c < nfchunks; c++) {
+			cstart = fchunk[c].addr;
+			cend = fchunk[c].addr + fchunk[c].len;
+			if (pstart >= cstart && pend <= cend)
+				break;
+		}
+		if (c >= nfchunks) {
+			printk(KERN_ERR
+			       "error: Failed to find image chunk for "
+			       "plugrec 0x%04x.\n", s3plug[i].itemcode);
+			result = 1;
+			continue;
+		}
+
+		/* Plug data */
+		chunkoff = pstart - cstart;
+		dest = fchunk[c].data + chunkoff;
+		pr_debug("Plugging item 0x%04x @ 0x%06x, len=%d, "
+			 "cnum=%d coff=0x%06x\n",
+			 s3plug[i].itemcode, pstart, s3plug[i].len,
+			 c, chunkoff);
+
+		if (j == -1) {	/* plug the filename */
+			memset(dest, 0, s3plug[i].len);
+			strncpy(dest, PRISM2_USB_FWFILE, s3plug[i].len - 1);
+		} else {	/* plug a PDR */
+			memcpy(dest, &(pda->rec[j]->data), s3plug[i].len);
+		}
+	}
+	return result;
+
+}
+
+/*----------------------------------------------------------------
+* read_cardpda
+*
+* Sends the command for the driver to read the pda from the card
+* named in the device variable.  Upon success, the card pda is
+* stored in the "cardpda" variables.  Note that the pda structure
+* is considered 'well formed' after this function.  That means
+* that the nrecs is valid, the rec array has been set up, and there's
+* a valid PDAEND record in the raw PDA data.
+*
+* Arguments:
+*	pda		pda structure
+*	wlandev		device
+*
+* Returns:
+*	0	- success
+*	~0	- failure (probably an errno)
+----------------------------------------------------------------*/
+int read_cardpda(pda_t * pda, wlandevice_t * wlandev)
+{
+	int result = 0;
+	p80211msg_p2req_readpda_t msg;
+
+	/* set up the msg */
+	msg.msgcode = DIDmsg_p2req_readpda;
+	msg.msglen = sizeof(msg);
+	strcpy(msg.devname, wlandev->name);
+	msg.pda.did = DIDmsg_p2req_readpda_pda;
+	msg.pda.len = HFA384x_PDA_LEN_MAX;
+	msg.pda.status = P80211ENUM_msgitem_status_no_value;
+	msg.resultcode.did = DIDmsg_p2req_readpda_resultcode;
+	msg.resultcode.len = sizeof(u32);
+	msg.resultcode.status = P80211ENUM_msgitem_status_no_value;
+
+	if (prism2mgmt_readpda(wlandev, &msg) != 0) {
+		/* prism2mgmt_readpda prints an errno if appropriate */
+		result = -1;
+	} else if (msg.resultcode.data == P80211ENUM_resultcode_success) {
+		memcpy(pda->buf, msg.pda.data, HFA384x_PDA_LEN_MAX);
+		result = mkpdrlist(pda);
+	} else {
+		/* resultcode must've been something other than success */
+		result = -1;
+	}
+
+	return result;
+}
+
+/*----------------------------------------------------------------
+* copy_line
+*
+* Copies a line of text, up to \n, \0, or SREC_LINE_MAX, or limit of
+* From array
+*
+* Arguments:
+*	from	From addr
+*	to	To addr
+*	limit	Addr of last character in From array that can be copied
+*
+* Returns:
+*	Num characters copied
+----------------------------------------------------------------*/
+int copyline(char *from, char *to, char *limit)
+{
+	int c = 0;
+
+	while ((c < SREC_LINE_MAX - 1) && (from + c <= limit) &&
+	       (from[c] != '\n') && (from[c] != '\0')) {
+		to[c] = from[c];
+		c++;
+	}
+
+	to[c] = '\0';
+	return (c < SREC_LINE_MAX - 1) ? c + 1 : c;
+}
+
+/*----------------------------------------------------------------
+* read_srecfile
+*
+* Reads the given srecord file and loads the records into the
+* s3xxx arrays.  This function can be called repeatedly (once for
+* each of a set of files), if necessary.  This function performs
+* no validation of the data except for the grossest of S-record
+* line format checks.  Don't forget that these will be DOS files...
+* CR/LF at the end of each line.
+*
+* Here's the SREC format we're dealing with:
+* S[37]nnaaaaaaaaddd...dddcc
+*
+*       nn - number of bytes starting with the address field
+* aaaaaaaa - address in readable (or big endian) format
+* dd....dd - 0-245 data bytes (two chars per byte)
+*       cc - checksum
+*
+* The S7 record's (there should be only one) address value gets
+* saved in startaddr.  It's the start execution address used
+* for RAM downloads.
+*
+* The S3 records have a collection of subformats indicated by the
+* value of aaaaaaaa:
+*   0xff000000 - Plug record, data field format:
+*                xxxxxxxxaaaaaaaassssssss
+*                x - PDR code number (little endian)
+*                a - Address in load image to plug (little endian)
+*                s - Length of plug data area (little endian)
+*
+*   0xff100000 - CRC16 generation record, data field format:
+*                aaaaaaaassssssssbbbbbbbb
+*                a - Start address for CRC calculation (little endian)
+*                s - Length of data to  calculate over (little endian)
+*                b - Boolean, true=write crc, false=don't write
+*
+*   0xff200000 - Info record, data field format:
+*                ssssttttdd..dd
+*                s - Size in words (little endian)
+*                t - Info type (little endian), see #defines and
+*                    s3inforec_t for details about types.
+*                d - (s - 1) little endian words giving the contents of
+*                    the given info type.
+*
+* Arguments:
+*	rfptr	firmware image (s-record structure) in kernel memory
+*	rfsize	firmware size in kernel memory
+*
+* Returns:
+*	0	- success
+*	~0	- failure (probably an errno)
+----------------------------------------------------------------*/
+int read_srecfile(char *rfptr, int rfsize)
+{
+	int result = 0;
+	char buf[SREC_LINE_MAX];
+	char tmpbuf[30];
+	s3datarec_t tmprec;
+	int i, c;
+	int line = 0;
+	u16 *tmpinfo;
+	char *endptr = rfptr + rfsize;
+
+	pr_debug("Reading S-record file ...\n");
+
+	while ((c = copyline(rfptr, buf, endptr)) >= 12) {
+		rfptr = rfptr + c;
+		line++;
+		if (buf[0] != 'S') {
+			printk(KERN_ERR "%d warning: No initial \'S\'\n", line);
+			return 1;
+		}
+		if (buf[1] == '7') {	/* S7 record, start address */
+			buf[12] = '\0';
+			startaddr = simple_strtoul(buf + 4, NULL, 16);
+			pr_debug("  S7 start addr, line=%d "
+				 " addr=0x%08x\n", line, startaddr);
+			continue;
+		} else if (buf[1] == '3') {
+			/* Ok, it's an S3, parse and put it in the right array */
+			/* Record Length field (we only want datalen) */
+			memcpy(tmpbuf, buf + S3LEN_TXTOFFSET, S3LEN_TXTLEN);
+			tmpbuf[S3LEN_TXTLEN] = '\0';
+			tmprec.len = simple_strtoul(tmpbuf, NULL, 16) - 4 - 1;	/* 4=addr, 1=cksum */
+			/* Address field */
+			memcpy(tmpbuf, buf + S3ADDR_TXTOFFSET, S3ADDR_TXTLEN);
+			tmpbuf[S3ADDR_TXTLEN] = '\0';
+			tmprec.addr = simple_strtoul(tmpbuf, NULL, 16);
+			/* Checksum field */
+			tmprec.checksum =
+			    simple_strtoul(buf + strlen(buf) - 2, NULL, 16);
+
+			switch (tmprec.addr) {
+			case S3ADDR_PLUG:
+				memcpy(tmpbuf, buf + S3PLUG_ITEMCODE_TXTOFFSET,
+				       S3PLUG_ITEMCODE_TXTLEN);
+				tmpbuf[S3PLUG_ITEMCODE_TXTLEN] = '\0';
+				s3plug[ns3plug].itemcode =
+				    simple_strtoul(tmpbuf, NULL, 16);
+				s3plug[ns3plug].itemcode =
+				    bswap_32(s3plug[ns3plug].itemcode);
+
+				memcpy(tmpbuf, buf + S3PLUG_ADDR_TXTOFFSET,
+				       S3PLUG_ADDR_TXTLEN);
+				tmpbuf[S3PLUG_ADDR_TXTLEN] = '\0';
+				s3plug[ns3plug].addr =
+				    simple_strtoul(tmpbuf, NULL, 16);
+				s3plug[ns3plug].addr =
+				    bswap_32(s3plug[ns3plug].addr);
+
+				memcpy(tmpbuf, buf + S3PLUG_LEN_TXTOFFSET,
+				       S3PLUG_LEN_TXTLEN);
+				tmpbuf[S3PLUG_LEN_TXTLEN] = '\0';
+				s3plug[ns3plug].len =
+				    simple_strtoul(tmpbuf, NULL, 16);
+				s3plug[ns3plug].len =
+				    bswap_32(s3plug[ns3plug].len);
+
+				pr_debug("  S3 plugrec, line=%d "
+					 "itemcode=0x%04x addr=0x%08x len=%d\n",
+					 line,
+					 s3plug[ns3plug].itemcode,
+					 s3plug[ns3plug].addr,
+					 s3plug[ns3plug].len);
+
+				ns3plug++;
+				if (ns3plug == S3PLUG_MAX) {
+					printk(KERN_ERR
+					       "S3 plugrec limit reached - aborting\n");
+					return 1;
+				}
+				break;
+			case S3ADDR_CRC:
+				memcpy(tmpbuf, buf + S3CRC_ADDR_TXTOFFSET,
+				       S3CRC_ADDR_TXTLEN);
+				tmpbuf[S3CRC_ADDR_TXTLEN] = '\0';
+				s3crc[ns3crc].addr =
+				    simple_strtoul(tmpbuf, NULL, 16);
+				s3crc[ns3crc].addr =
+				    bswap_32(s3crc[ns3crc].addr);
+
+				memcpy(tmpbuf, buf + S3CRC_LEN_TXTOFFSET,
+				       S3CRC_LEN_TXTLEN);
+				tmpbuf[S3CRC_LEN_TXTLEN] = '\0';
+				s3crc[ns3crc].len =
+				    simple_strtoul(tmpbuf, NULL, 16);
+				s3crc[ns3crc].len = bswap_32(s3crc[ns3crc].len);
+
+				memcpy(tmpbuf, buf + S3CRC_DOWRITE_TXTOFFSET,
+				       S3CRC_DOWRITE_TXTLEN);
+				tmpbuf[S3CRC_DOWRITE_TXTLEN] = '\0';
+				s3crc[ns3crc].dowrite =
+				    simple_strtoul(tmpbuf, NULL, 16);
+				s3crc[ns3crc].dowrite =
+				    bswap_32(s3crc[ns3crc].dowrite);
+
+				pr_debug("  S3 crcrec, line=%d "
+					 "addr=0x%08x len=%d write=0x%08x\n",
+					 line,
+					 s3crc[ns3crc].addr,
+					 s3crc[ns3crc].len,
+					 s3crc[ns3crc].dowrite);
+				ns3crc++;
+				if (ns3crc == S3CRC_MAX) {
+					printk(KERN_ERR
+					       "S3 crcrec limit reached - aborting\n");
+					return 1;
+				}
+				break;
+			case S3ADDR_INFO:
+				memcpy(tmpbuf, buf + S3INFO_LEN_TXTOFFSET,
+				       S3INFO_LEN_TXTLEN);
+				tmpbuf[S3INFO_LEN_TXTLEN] = '\0';
+				s3info[ns3info].len =
+				    simple_strtoul(tmpbuf, NULL, 16);
+				s3info[ns3info].len =
+				    bswap_16(s3info[ns3info].len);
+
+				memcpy(tmpbuf, buf + S3INFO_TYPE_TXTOFFSET,
+				       S3INFO_TYPE_TXTLEN);
+				tmpbuf[S3INFO_TYPE_TXTLEN] = '\0';
+				s3info[ns3info].type =
+				    simple_strtoul(tmpbuf, NULL, 16);
+				s3info[ns3info].type =
+				    bswap_16(s3info[ns3info].type);
+
+				pr_debug("  S3 inforec, line=%d "
+					 "len=0x%04x type=0x%04x\n",
+					 line,
+					 s3info[ns3info].len,
+					 s3info[ns3info].type);
+				if (((s3info[ns3info].len - 1) * sizeof(u16)) >
+				    sizeof(s3info[ns3info].info)) {
+					printk(KERN_ERR
+					       " S3 inforec length too long - aborting\n");
+					return 1;
+				}
+
+				tmpinfo =
+				    (u16 *) & (s3info[ns3info].info.version);
+				for (i = 0; i < s3info[ns3info].len - 1; i++) {
+					memcpy(tmpbuf,
+					       buf + S3INFO_DATA_TXTOFFSET +
+					       (i * 4), 4);
+					tmpbuf[4] = '\0';
+					tmpinfo[i] =
+					    simple_strtoul(tmpbuf, NULL, 16);
+					tmpinfo[i] = bswap_16(tmpinfo[i]);
+				}
+				pr_debug("            info=");
+				for (i = 0; i < s3info[ns3info].len - 1; i++) {
+					pr_debug("%04x ", tmpinfo[i]);
+				}
+				pr_debug("\n");
+
+				ns3info++;
+				if (ns3info == S3INFO_MAX) {
+					printk(KERN_ERR
+					       "S3 inforec limit reached - aborting\n");
+					return 1;
+				}
+				break;
+			default:	/* Data record */
+				s3data[ns3data].addr = tmprec.addr;
+				s3data[ns3data].len = tmprec.len;
+				s3data[ns3data].checksum = tmprec.checksum;
+				s3data[ns3data].data =
+				    kmalloc(tmprec.len, GFP_KERNEL);
+				for (i = 0; i < tmprec.len; i++) {
+					memcpy(tmpbuf,
+					       buf + S3DATA_TXTOFFSET + (i * 2),
+					       2);
+					tmpbuf[2] = '\0';
+					s3data[ns3data].data[i] =
+					    simple_strtoul(tmpbuf, NULL, 16);
+				}
+				ns3data++;
+				if (ns3data == S3DATA_MAX) {
+					printk(KERN_ERR
+					       "S3 datarec limit reached - aborting\n");
+					return 1;
+				}
+				break;
+			}
+		} else {
+			printk(KERN_WARNING
+			       "%d warning: Unknown S-record detected.\n",
+			       line);
+		}
+	}
+	return result;
+}
+
+/*----------------------------------------------------------------
+* s3datarec_compare
+*
+* Comparison function for sort().
+*
+* Arguments:
+*	p1	ptr to the first item
+*	p2	ptr to the second item
+* Returns:
+*	0	items are equal
+*	<0	p1 < p2
+*	>0	p1 > p2
+----------------------------------------------------------------*/
+int s3datarec_compare(const void *p1, const void *p2)
+{
+	const s3datarec_t *s1 = p1;
+	const s3datarec_t *s2 = p2;
+	if (s1->addr == s2->addr)
+		return 0;
+	if (s1->addr < s2->addr)
+		return -1;
+	return 1;
+}
+
+/*----------------------------------------------------------------
+* writeimage
+*
+* Takes the chunks, builds p80211 messages and sends them down
+* to the driver for writing to the card.
+*
+* Arguments:
+*	wlandev		device
+*	fchunk		Array of image chunks
+*	nfchunks	Number of image chunks
+*
+* Returns:
+*	0	success
+*	~0	failure
+----------------------------------------------------------------*/
+int writeimage(wlandevice_t * wlandev, imgchunk_t * fchunk,
+	       unsigned int nfchunks)
+{
+	int result = 0;
+	p80211msg_p2req_ramdl_state_t rstatemsg;
+	p80211msg_p2req_ramdl_write_t rwritemsg;
+	p80211msg_t *msgp;
+	u32 resultcode;
+	int i;
+	int j;
+	unsigned int nwrites;
+	u32 curroff;
+	u32 currlen;
+	u32 currdaddr;
+
+	/* Initialize the messages */
+	memset(&rstatemsg, 0, sizeof(rstatemsg));
+	strcpy(rstatemsg.devname, wlandev->name);
+	rstatemsg.msgcode = DIDmsg_p2req_ramdl_state;
+	rstatemsg.msglen = sizeof(rstatemsg);
+	rstatemsg.enable.did = DIDmsg_p2req_ramdl_state_enable;
+	rstatemsg.exeaddr.did = DIDmsg_p2req_ramdl_state_exeaddr;
+	rstatemsg.resultcode.did = DIDmsg_p2req_ramdl_state_resultcode;
+	rstatemsg.enable.status = P80211ENUM_msgitem_status_data_ok;
+	rstatemsg.exeaddr.status = P80211ENUM_msgitem_status_data_ok;
+	rstatemsg.resultcode.status = P80211ENUM_msgitem_status_no_value;
+	rstatemsg.enable.len = sizeof(u32);
+	rstatemsg.exeaddr.len = sizeof(u32);
+	rstatemsg.resultcode.len = sizeof(u32);
+
+	memset(&rwritemsg, 0, sizeof(rwritemsg));
+	strcpy(rwritemsg.devname, wlandev->name);
+	rwritemsg.msgcode = DIDmsg_p2req_ramdl_write;
+	rwritemsg.msglen = sizeof(rwritemsg);
+	rwritemsg.addr.did = DIDmsg_p2req_ramdl_write_addr;
+	rwritemsg.len.did = DIDmsg_p2req_ramdl_write_len;
+	rwritemsg.data.did = DIDmsg_p2req_ramdl_write_data;
+	rwritemsg.resultcode.did = DIDmsg_p2req_ramdl_write_resultcode;
+	rwritemsg.addr.status = P80211ENUM_msgitem_status_data_ok;
+	rwritemsg.len.status = P80211ENUM_msgitem_status_data_ok;
+	rwritemsg.data.status = P80211ENUM_msgitem_status_data_ok;
+	rwritemsg.resultcode.status = P80211ENUM_msgitem_status_no_value;
+	rwritemsg.addr.len = sizeof(u32);
+	rwritemsg.len.len = sizeof(u32);
+	rwritemsg.data.len = WRITESIZE_MAX;
+	rwritemsg.resultcode.len = sizeof(u32);
+
+	/* Send xxx_state(enable) */
+	pr_debug("Sending dl_state(enable) message.\n");
+	rstatemsg.enable.data = P80211ENUM_truth_true;
+	rstatemsg.exeaddr.data = startaddr;
+
+	msgp = (p80211msg_t *) & rstatemsg;
+	result = prism2mgmt_ramdl_state(wlandev, msgp);
+	if (result) {
+		printk(KERN_ERR
+		       "writeimage state enable failed w/ result=%d, "
+		       "aborting download\n", result);
+		return result;
+	}
+	resultcode = rstatemsg.resultcode.data;
+	if (resultcode != P80211ENUM_resultcode_success) {
+		printk(KERN_ERR
+		       "writeimage()->xxxdl_state msg indicates failure, "
+		       "w/ resultcode=%d, aborting download.\n", resultcode);
+		return 1;
+	}
+
+	/* Now, loop through the data chunks and send WRITESIZE_MAX data */
+	for (i = 0; i < nfchunks; i++) {
+		nwrites = fchunk[i].len / WRITESIZE_MAX;
+		nwrites += (fchunk[i].len % WRITESIZE_MAX) ? 1 : 0;
+		curroff = 0;
+		for (j = 0; j < nwrites; j++) {
+			currlen =
+			    (fchunk[i].len - (WRITESIZE_MAX * j)) >
+			    WRITESIZE_MAX ? WRITESIZE_MAX : (fchunk[i].len -
+							     (WRITESIZE_MAX *
+							      j));
+			curroff = j * WRITESIZE_MAX;
+			currdaddr = fchunk[i].addr + curroff;
+			/* Setup the message */
+			rwritemsg.addr.data = currdaddr;
+			rwritemsg.len.data = currlen;
+			memcpy(rwritemsg.data.data,
+			       fchunk[i].data + curroff, currlen);
+
+			/* Send flashdl_write(pda) */
+			pr_debug
+			    ("Sending xxxdl_write message addr=%06x len=%d.\n",
+			     currdaddr, currlen);
+
+			msgp = (p80211msg_t *) & rwritemsg;
+			result = prism2mgmt_ramdl_write(wlandev, msgp);
+
+			/* Check the results */
+			if (result) {
+				printk(KERN_ERR
+				       "writeimage chunk write failed w/ result=%d, "
+				       "aborting download\n", result);
+				return result;
+			}
+			resultcode = rstatemsg.resultcode.data;
+			if (resultcode != P80211ENUM_resultcode_success) {
+				printk(KERN_ERR
+				       "writeimage()->xxxdl_write msg indicates failure, "
+				       "w/ resultcode=%d, aborting download.\n",
+				       resultcode);
+				return 1;
+			}
+
+		}
+	}
+
+	/* Send xxx_state(disable) */
+	pr_debug("Sending dl_state(disable) message.\n");
+	rstatemsg.enable.data = P80211ENUM_truth_false;
+	rstatemsg.exeaddr.data = 0;
+
+	msgp = (p80211msg_t *) & rstatemsg;
+	result = prism2mgmt_ramdl_state(wlandev, msgp);
+	if (result) {
+		printk(KERN_ERR
+		       "writeimage state disable failed w/ result=%d, "
+		       "aborting download\n", result);
+		return result;
+	}
+	resultcode = rstatemsg.resultcode.data;
+	if (resultcode != P80211ENUM_resultcode_success) {
+		printk(KERN_ERR
+		       "writeimage()->xxxdl_state msg indicates failure, "
+		       "w/ resultcode=%d, aborting download.\n", resultcode);
+		return 1;
+	}
+	return result;
+}
+
+int validate_identity(void)
+{
+	int i;
+	int result = 1;
+
+	pr_debug("NIC ID: %#x v%d.%d.%d\n",
+		 nicid.id, nicid.major, nicid.minor, nicid.variant);
+	pr_debug("MFI ID: %#x v%d %d->%d\n",
+		 rfid.id, rfid.variant, rfid.bottom, rfid.top);
+	pr_debug("CFI ID: %#x v%d %d->%d\n",
+		 macid.id, macid.variant, macid.bottom, macid.top);
+	pr_debug("PRI ID: %#x v%d %d->%d\n",
+		 priid.id, priid.variant, priid.bottom, priid.top);
+
+	for (i = 0; i < ns3info; i++) {
+		switch (s3info[i].type) {
+		case 1:
+			pr_debug("Version:  ID %#x %d.%d.%d\n",
+				 s3info[i].info.version.id,
+				 s3info[i].info.version.major,
+				 s3info[i].info.version.minor,
+				 s3info[i].info.version.variant);
+			break;
+		case 2:
+			pr_debug("Compat: Role %#x Id %#x v%d %d->%d\n",
+				 s3info[i].info.compat.role,
+				 s3info[i].info.compat.id,
+				 s3info[i].info.compat.variant,
+				 s3info[i].info.compat.bottom,
+				 s3info[i].info.compat.top);
+
+			/* MAC compat range */
+			if ((s3info[i].info.compat.role == 1) &&
+			    (s3info[i].info.compat.id == 2)) {
+				if (s3info[i].info.compat.variant !=
+				    macid.variant) {
+					result = 2;
+				}
+			}
+
+			/* PRI compat range */
+			if ((s3info[i].info.compat.role == 1) &&
+			    (s3info[i].info.compat.id == 3)) {
+				if ((s3info[i].info.compat.bottom > priid.top)
+				    || (s3info[i].info.compat.top <
+					priid.bottom)) {
+					result = 3;
+				}
+			}
+			/* SEC compat range */
+			if ((s3info[i].info.compat.role == 1) &&
+			    (s3info[i].info.compat.id == 4)) {
+
+			}
+
+			break;
+		case 3:
+			pr_debug("Seq: %#x\n", s3info[i].info.buildseq);
+
+			break;
+		case 4:
+			pr_debug("Platform:  ID %#x %d.%d.%d\n",
+				 s3info[i].info.version.id,
+				 s3info[i].info.version.major,
+				 s3info[i].info.version.minor,
+				 s3info[i].info.version.variant);
+
+			if (nicid.id != s3info[i].info.version.id)
+				continue;
+			if (nicid.major != s3info[i].info.version.major)
+				continue;
+			if (nicid.minor != s3info[i].info.version.minor)
+				continue;
+			if ((nicid.variant != s3info[i].info.version.variant) &&
+			    (nicid.id != 0x8008))
+				continue;
+
+			if (result != 2)
+				result = 0;
+			break;
+		case 0x8001:
+			pr_debug("name inforec len %d\n", s3info[i].len);
+
+			break;
+		default:
+			pr_debug("Unknown inforec type %d\n", s3info[i].type);
+		}
+	}
+	// walk through
+
+	return result;
+}
diff --git a/drivers/staging/wlan-ng/prism2mgmt.c b/drivers/staging/wlan-ng/prism2mgmt.c
index e7a7939b428..465457653eb 100644
--- a/drivers/staging/wlan-ng/prism2mgmt.c
+++ b/drivers/staging/wlan-ng/prism2mgmt.c
@@ -117,7 +117,7 @@
 *	process thread  (usually)
 *	interrupt
 ----------------------------------------------------------------*/
-int prism2mgmt_scan(wlandevice_t *wlandev, void *msgp)
+int prism2mgmt_scan(wlandevice_t * wlandev, void *msgp)
 {
 	int result = 0;
 	hfa384x_t *hw = wlandev->priv;
@@ -362,7 +362,7 @@ exit:
 *	process thread  (usually)
 *	interrupt
 ----------------------------------------------------------------*/
-int prism2mgmt_scan_results(wlandevice_t *wlandev, void *msgp)
+int prism2mgmt_scan_results(wlandevice_t * wlandev, void *msgp)
 {
 	int result = 0;
 	p80211msg_dot11req_scan_results_t *req;
@@ -389,7 +389,7 @@ int prism2mgmt_scan_results(wlandevice_t *wlandev, void *msgp)
 
 	if (req->bssindex.data >= count) {
 		pr_debug("requested index (%d) out of range (%d)\n",
-		       req->bssindex.data, count);
+			 req->bssindex.data, count);
 		result = 2;
 		req->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
 		goto exit;
@@ -511,7 +511,7 @@ exit:
 *	process thread  (usually)
 *	interrupt
 ----------------------------------------------------------------*/
-int prism2mgmt_start(wlandevice_t *wlandev, void *msgp)
+int prism2mgmt_start(wlandevice_t * wlandev, void *msgp)
 {
 	int result = 0;
 	hfa384x_t *hw = wlandev->priv;
@@ -544,7 +544,7 @@ int prism2mgmt_start(wlandevice_t *wlandev, void *msgp)
 	/*** STATION ***/
 	/* Set the REQUIRED config items */
 	/* SSID */
-	pstr = (p80211pstrd_t *)&(msg->ssid.data);
+	pstr = (p80211pstrd_t *) & (msg->ssid.data);
 	prism2mgmt_pstr2bytestr(p2bytestr, pstr);
 	result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFOWNSSID,
 					bytebuf, HFA384x_RID_CNFOWNSSID_LEN);
@@ -688,7 +688,7 @@ done:
 * Call context:
 *	process thread  (usually)
 ----------------------------------------------------------------*/
-int prism2mgmt_readpda(wlandevice_t *wlandev, void *msgp)
+int prism2mgmt_readpda(wlandevice_t * wlandev, void *msgp)
 {
 	hfa384x_t *hw = wlandev->priv;
 	p80211msg_p2req_readpda_t *msg = msgp;
@@ -754,7 +754,7 @@ int prism2mgmt_readpda(wlandevice_t *wlandev, void *msgp)
 * Call context:
 *	process thread  (usually)
 ----------------------------------------------------------------*/
-int prism2mgmt_ramdl_state(wlandevice_t *wlandev, void *msgp)
+int prism2mgmt_ramdl_state(wlandevice_t * wlandev, void *msgp)
 {
 	hfa384x_t *hw = wlandev->priv;
 	p80211msg_p2req_ramdl_state_t *msg = msgp;
@@ -810,7 +810,7 @@ int prism2mgmt_ramdl_state(wlandevice_t *wlandev, void *msgp)
 * Call context:
 *	process thread  (usually)
 ----------------------------------------------------------------*/
-int prism2mgmt_ramdl_write(wlandevice_t *wlandev, void *msgp)
+int prism2mgmt_ramdl_write(wlandevice_t * wlandev, void *msgp)
 {
 	hfa384x_t *hw = wlandev->priv;
 	p80211msg_p2req_ramdl_write_t *msg = msgp;
@@ -872,7 +872,7 @@ int prism2mgmt_ramdl_write(wlandevice_t *wlandev, void *msgp)
 * Call context:
 *	process thread  (usually)
 ----------------------------------------------------------------*/
-int prism2mgmt_flashdl_state(wlandevice_t *wlandev, void *msgp)
+int prism2mgmt_flashdl_state(wlandevice_t * wlandev, void *msgp)
 {
 	int result = 0;
 	hfa384x_t *hw = wlandev->priv;
@@ -943,7 +943,7 @@ int prism2mgmt_flashdl_state(wlandevice_t *wlandev, void *msgp)
 * Call context:
 *	process thread  (usually)
 ----------------------------------------------------------------*/
-int prism2mgmt_flashdl_write(wlandevice_t *wlandev, void *msgp)
+int prism2mgmt_flashdl_write(wlandevice_t * wlandev, void *msgp)
 {
 	hfa384x_t *hw = wlandev->priv;
 	p80211msg_p2req_flashdl_write_t *msg = msgp;
@@ -1004,7 +1004,7 @@ int prism2mgmt_flashdl_write(wlandevice_t *wlandev, void *msgp)
 *	process thread  (usually)
 *	interrupt
 ----------------------------------------------------------------*/
-int prism2mgmt_autojoin(wlandevice_t *wlandev, void *msgp)
+int prism2mgmt_autojoin(wlandevice_t * wlandev, void *msgp)
 {
 	hfa384x_t *hw = wlandev->priv;
 	int result = 0;
@@ -1037,7 +1037,7 @@ int prism2mgmt_autojoin(wlandevice_t *wlandev, void *msgp)
 
 	/* Set the ssid */
 	memset(bytebuf, 0, 256);
-	pstr = (p80211pstrd_t *)&(msg->ssid.data);
+	pstr = (p80211pstrd_t *) & (msg->ssid.data);
 	prism2mgmt_pstr2bytestr(p2bytestr, pstr);
 	result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFDESIREDSSID,
 					bytebuf,
@@ -1075,7 +1075,7 @@ int prism2mgmt_autojoin(wlandevice_t *wlandev, void *msgp)
 *	process thread  (usually)
 *	interrupt
 ----------------------------------------------------------------*/
-int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
+int prism2mgmt_wlansniff(wlandevice_t * wlandev, void *msgp)
 {
 	int result = 0;
 	p80211msg_lnxreq_wlansniff_t *msg = msgp;
@@ -1096,17 +1096,16 @@ int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
 		/* Disable monitor mode */
 		result = hfa384x_cmd_monitor(hw, HFA384x_MONITOR_DISABLE);
 		if (result) {
-			printk(KERN_DEBUG
-			       "failed to disable monitor mode, result=%d\n",
-			       result);
+			pr_debug("failed to disable monitor mode, result=%d\n",
+				 result);
 			goto failed;
 		}
 		/* Disable port 0 */
 		result = hfa384x_drvr_disable(hw, 0);
 		if (result) {
-			printk(KERN_DEBUG
-			       "failed to disable port 0 after sniffing, result=%d\n",
-			       result);
+			pr_debug
+			    ("failed to disable port 0 after sniffing, result=%d\n",
+			     result);
 			goto failed;
 		}
 		/* Clear the driver state */
@@ -1117,9 +1116,9 @@ int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
 						  HFA384x_RID_CNFWEPFLAGS,
 						  hw->presniff_wepflags);
 		if (result) {
-			printk(KERN_DEBUG
-			       "failed to restore wepflags=0x%04x, result=%d\n",
-			       hw->presniff_wepflags, result);
+			pr_debug
+			    ("failed to restore wepflags=0x%04x, result=%d\n",
+			     hw->presniff_wepflags, result);
 			goto failed;
 		}
 
@@ -1130,18 +1129,18 @@ int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
 							  HFA384x_RID_CNFPORTTYPE,
 							  word);
 			if (result) {
-				printk(KERN_DEBUG
-				       "failed to restore porttype, result=%d\n",
-				       result);
+				pr_debug
+				    ("failed to restore porttype, result=%d\n",
+				     result);
 				goto failed;
 			}
 
 			/* Enable the port */
 			result = hfa384x_drvr_enable(hw, 0);
 			if (result) {
-				printk(KERN_DEBUG
-				       "failed to enable port to presniff setting, result=%d\n",
-				       result);
+				pr_debug
+				    ("failed to enable port to presniff setting, result=%d\n",
+				     result);
 				goto failed;
 			}
 		} else {
@@ -1161,40 +1160,42 @@ int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
 				/* Save macport 0 state */
 				result = hfa384x_drvr_getconfig16(hw,
 								  HFA384x_RID_CNFPORTTYPE,
-								  &(hw->
-								    presniff_port_type));
+								  &
+								  (hw->
+								   presniff_port_type));
 				if (result) {
-					printk(KERN_DEBUG
-					       "failed to read porttype, result=%d\n",
-					       result);
+					pr_debug
+					    ("failed to read porttype, result=%d\n",
+					     result);
 					goto failed;
 				}
 				/* Save the wepflags state */
 				result = hfa384x_drvr_getconfig16(hw,
 								  HFA384x_RID_CNFWEPFLAGS,
-								  &(hw->
-								    presniff_wepflags));
+								  &
+								  (hw->
+								   presniff_wepflags));
 				if (result) {
-					printk(KERN_DEBUG
-					       "failed to read wepflags, result=%d\n",
-					       result);
+					pr_debug
+					    ("failed to read wepflags, result=%d\n",
+					     result);
 					goto failed;
 				}
 				hfa384x_drvr_stop(hw);
 				result = hfa384x_drvr_start(hw);
 				if (result) {
-					printk(KERN_DEBUG
-					       "failed to restart the card for sniffing, result=%d\n",
-					       result);
+					pr_debug
+					    ("failed to restart the card for sniffing, result=%d\n",
+					     result);
 					goto failed;
 				}
 			} else {
 				/* Disable the port */
 				result = hfa384x_drvr_disable(hw, 0);
 				if (result) {
-					printk(KERN_DEBUG
-					       "failed to enable port for sniffing, result=%d\n",
-					       result);
+					pr_debug
+					    ("failed to enable port for sniffing, result=%d\n",
+					     result);
 					goto failed;
 				}
 			}
@@ -1210,9 +1211,8 @@ int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
 		hw->sniff_channel = word;
 
 		if (result) {
-			printk(KERN_DEBUG
-			       "failed to set channel %d, result=%d\n",
-			       word, result);
+			pr_debug("failed to set channel %d, result=%d\n",
+				 word, result);
 			goto failed;
 		}
 
@@ -1224,9 +1224,9 @@ int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
 							  HFA384x_RID_CNFPORTTYPE,
 							  word);
 			if (result) {
-				printk(KERN_DEBUG
-				       "failed to set porttype %d, result=%d\n",
-				       word, result);
+				pr_debug
+				    ("failed to set porttype %d, result=%d\n",
+				     word, result);
 				goto failed;
 			}
 			if ((msg->keepwepflags.status ==
@@ -1243,9 +1243,9 @@ int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
 			}
 
 			if (result) {
-				printk(KERN_DEBUG
-				       "failed to set wepflags=0x%04x, result=%d\n",
-				       word, result);
+				pr_debug
+				    ("failed to set wepflags=0x%04x, result=%d\n",
+				     word, result);
 				goto failed;
 			}
 		}
@@ -1269,17 +1269,16 @@ int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
 		/* Enable the port */
 		result = hfa384x_drvr_enable(hw, 0);
 		if (result) {
-			printk(KERN_DEBUG
-			       "failed to enable port for sniffing, result=%d\n",
-			       result);
+			pr_debug
+			    ("failed to enable port for sniffing, result=%d\n",
+			     result);
 			goto failed;
 		}
 		/* Enable monitor mode */
 		result = hfa384x_cmd_monitor(hw, HFA384x_MONITOR_ENABLE);
 		if (result) {
-			printk(KERN_DEBUG
-			       "failed to enable monitor mode, result=%d\n",
-			       result);
+			pr_debug("failed to enable monitor mode, result=%d\n",
+				 result);
 			goto failed;
 		}
 
diff --git a/drivers/staging/wlan-ng/prism2mgmt.h b/drivers/staging/wlan-ng/prism2mgmt.h
index 07eecebeb6c..bdf2b3e0325 100644
--- a/drivers/staging/wlan-ng/prism2mgmt.h
+++ b/drivers/staging/wlan-ng/prism2mgmt.h
@@ -63,43 +63,43 @@
 extern int prism2_reset_holdtime;
 extern int prism2_reset_settletime;
 
-u32 prism2sta_ifstate(wlandevice_t *wlandev, u32 ifstate);
+u32 prism2sta_ifstate(wlandevice_t * wlandev, u32 ifstate);
 
-void prism2sta_ev_info(wlandevice_t *wlandev, hfa384x_InfFrame_t *inf);
-void prism2sta_ev_txexc(wlandevice_t *wlandev, u16 status);
-void prism2sta_ev_tx(wlandevice_t *wlandev, u16 status);
-void prism2sta_ev_rx(wlandevice_t *wlandev, struct sk_buff *skb);
-void prism2sta_ev_alloc(wlandevice_t *wlandev);
+void prism2sta_ev_info(wlandevice_t * wlandev, hfa384x_InfFrame_t * inf);
+void prism2sta_ev_txexc(wlandevice_t * wlandev, u16 status);
+void prism2sta_ev_tx(wlandevice_t * wlandev, u16 status);
+void prism2sta_ev_rx(wlandevice_t * wlandev, struct sk_buff *skb);
+void prism2sta_ev_alloc(wlandevice_t * wlandev);
 
-int prism2mgmt_mibset_mibget(wlandevice_t *wlandev, void *msgp);
-int prism2mgmt_scan(wlandevice_t *wlandev, void *msgp);
-int prism2mgmt_scan_results(wlandevice_t *wlandev, void *msgp);
-int prism2mgmt_start(wlandevice_t *wlandev, void *msgp);
-int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp);
-int prism2mgmt_readpda(wlandevice_t *wlandev, void *msgp);
-int prism2mgmt_ramdl_state(wlandevice_t *wlandev, void *msgp);
-int prism2mgmt_ramdl_write(wlandevice_t *wlandev, void *msgp);
-int prism2mgmt_flashdl_state(wlandevice_t *wlandev, void *msgp);
-int prism2mgmt_flashdl_write(wlandevice_t *wlandev, void *msgp);
-int prism2mgmt_autojoin(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_mibset_mibget(wlandevice_t * wlandev, void *msgp);
+int prism2mgmt_scan(wlandevice_t * wlandev, void *msgp);
+int prism2mgmt_scan_results(wlandevice_t * wlandev, void *msgp);
+int prism2mgmt_start(wlandevice_t * wlandev, void *msgp);
+int prism2mgmt_wlansniff(wlandevice_t * wlandev, void *msgp);
+int prism2mgmt_readpda(wlandevice_t * wlandev, void *msgp);
+int prism2mgmt_ramdl_state(wlandevice_t * wlandev, void *msgp);
+int prism2mgmt_ramdl_write(wlandevice_t * wlandev, void *msgp);
+int prism2mgmt_flashdl_state(wlandevice_t * wlandev, void *msgp);
+int prism2mgmt_flashdl_write(wlandevice_t * wlandev, void *msgp);
+int prism2mgmt_autojoin(wlandevice_t * wlandev, void *msgp);
 
 /*---------------------------------------------------------------
 * conversion functions going between wlan message data types and
 * Prism2 data types
 ---------------------------------------------------------------*/
 /* byte area conversion functions*/
-void prism2mgmt_pstr2bytearea(u8 *bytearea, p80211pstrd_t *pstr);
-void prism2mgmt_bytearea2pstr(u8 *bytearea, p80211pstrd_t *pstr, int len);
+void prism2mgmt_pstr2bytearea(u8 * bytearea, p80211pstrd_t * pstr);
+void prism2mgmt_bytearea2pstr(u8 * bytearea, p80211pstrd_t * pstr, int len);
 
 /* byte string conversion functions*/
-void prism2mgmt_pstr2bytestr(hfa384x_bytestr_t *bytestr, p80211pstrd_t *pstr);
-void prism2mgmt_bytestr2pstr(hfa384x_bytestr_t *bytestr, p80211pstrd_t *pstr);
+void prism2mgmt_pstr2bytestr(hfa384x_bytestr_t * bytestr, p80211pstrd_t * pstr);
+void prism2mgmt_bytestr2pstr(hfa384x_bytestr_t * bytestr, p80211pstrd_t * pstr);
 
 /* functions to convert Group Addresses */
-void prism2mgmt_get_grpaddr(u32 did, p80211pstrd_t *pstr, hfa384x_t *priv);
+void prism2mgmt_get_grpaddr(u32 did, p80211pstrd_t * pstr, hfa384x_t * priv);
 int prism2mgmt_set_grpaddr(u32 did,
-			   u8 *prism2buf, p80211pstrd_t *pstr,
-			   hfa384x_t *priv);
+			   u8 * prism2buf, p80211pstrd_t * pstr,
+			   hfa384x_t * priv);
 int prism2mgmt_get_grpaddr_index(u32 did);
 
 void prism2sta_processing_defer(struct work_struct *data);
diff --git a/drivers/staging/wlan-ng/prism2mib.c b/drivers/staging/wlan-ng/prism2mib.c
index 5a6ba86009d..f930254e1b3 100644
--- a/drivers/staging/wlan-ng/prism2mib.c
+++ b/drivers/staging/wlan-ng/prism2mib.c
@@ -50,7 +50,6 @@
 * --------------------------------------------------------------------
 */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
@@ -87,65 +86,65 @@ typedef struct mibrec {
 	u16 parm1;
 	u16 parm2;
 	u16 parm3;
-	int (*func) (struct mibrec *mib,
+	int (*func) (struct mibrec * mib,
 		     int isget,
-		     wlandevice_t *wlandev,
-		     hfa384x_t *hw,
-		     p80211msg_dot11req_mibset_t *msg, void *data);
+		     wlandevice_t * wlandev,
+		     hfa384x_t * hw,
+		     p80211msg_dot11req_mibset_t * msg, void *data);
 } mibrec_t;
 
-static int prism2mib_bytearea2pstr(mibrec_t *mib,
+static int prism2mib_bytearea2pstr(mibrec_t * mib,
 				   int isget,
-				   wlandevice_t *wlandev,
-				   hfa384x_t *hw,
-				   p80211msg_dot11req_mibset_t *msg,
+				   wlandevice_t * wlandev,
+				   hfa384x_t * hw,
+				   p80211msg_dot11req_mibset_t * msg,
 				   void *data);
 
-static int prism2mib_uint32(mibrec_t *mib,
+static int prism2mib_uint32(mibrec_t * mib,
 			    int isget,
-			    wlandevice_t *wlandev,
-			    hfa384x_t *hw,
-			    p80211msg_dot11req_mibset_t *msg, void *data);
+			    wlandevice_t * wlandev,
+			    hfa384x_t * hw,
+			    p80211msg_dot11req_mibset_t * msg, void *data);
 
-static int prism2mib_flag(mibrec_t *mib,
+static int prism2mib_flag(mibrec_t * mib,
 			  int isget,
-			  wlandevice_t *wlandev,
-			  hfa384x_t *hw,
-			  p80211msg_dot11req_mibset_t *msg, void *data);
+			  wlandevice_t * wlandev,
+			  hfa384x_t * hw,
+			  p80211msg_dot11req_mibset_t * msg, void *data);
 
-static int prism2mib_wepdefaultkey(mibrec_t *mib,
+static int prism2mib_wepdefaultkey(mibrec_t * mib,
 				   int isget,
-				   wlandevice_t *wlandev,
-				   hfa384x_t *hw,
-				   p80211msg_dot11req_mibset_t *msg,
+				   wlandevice_t * wlandev,
+				   hfa384x_t * hw,
+				   p80211msg_dot11req_mibset_t * msg,
 				   void *data);
 
-static int prism2mib_privacyinvoked(mibrec_t *mib,
+static int prism2mib_privacyinvoked(mibrec_t * mib,
 				    int isget,
-				    wlandevice_t *wlandev,
-				    hfa384x_t *hw,
-				    p80211msg_dot11req_mibset_t *msg,
+				    wlandevice_t * wlandev,
+				    hfa384x_t * hw,
+				    p80211msg_dot11req_mibset_t * msg,
 				    void *data);
 
-static int prism2mib_excludeunencrypted(mibrec_t *mib,
+static int prism2mib_excludeunencrypted(mibrec_t * mib,
 					int isget,
-					wlandevice_t *wlandev,
-					hfa384x_t *hw,
-					p80211msg_dot11req_mibset_t *msg,
+					wlandevice_t * wlandev,
+					hfa384x_t * hw,
+					p80211msg_dot11req_mibset_t * msg,
 					void *data);
 
-static int prism2mib_fragmentationthreshold(mibrec_t *mib,
+static int prism2mib_fragmentationthreshold(mibrec_t * mib,
 					    int isget,
-					    wlandevice_t *wlandev,
-					    hfa384x_t *hw,
-					    p80211msg_dot11req_mibset_t *msg,
+					    wlandevice_t * wlandev,
+					    hfa384x_t * hw,
+					    p80211msg_dot11req_mibset_t * msg,
 					    void *data);
 
-static int prism2mib_priv(mibrec_t *mib,
+static int prism2mib_priv(mibrec_t * mib,
 			  int isget,
-			  wlandevice_t *wlandev,
-			  hfa384x_t *hw,
-			  p80211msg_dot11req_mibset_t *msg, void *data);
+			  wlandevice_t * wlandev,
+			  hfa384x_t * hw,
+			  p80211msg_dot11req_mibset_t * msg, void *data);
 
 static mibrec_t mibtab[] = {
 
@@ -259,7 +258,7 @@ static mibrec_t mibtab[] = {
 *	interrupt
 ----------------------------------------------------------------*/
 
-int prism2mgmt_mibset_mibget(wlandevice_t *wlandev, void *msgp)
+int prism2mgmt_mibset_mibget(wlandevice_t * wlandev, void *msgp)
 {
 	hfa384x_t *hw = wlandev->priv;
 	int result, isget;
@@ -331,8 +330,7 @@ int prism2mgmt_mibset_mibget(wlandevice_t *wlandev, void *msgp)
 
 	if (msg->resultcode.data == P80211ENUM_resultcode_success) {
 		if (result != 0) {
-			pr_debug("get/set failure, result=%d\n",
-			       result);
+			pr_debug("get/set failure, result=%d\n", result);
 			msg->resultcode.data =
 			    P80211ENUM_resultcode_implementation_failure;
 		} else {
@@ -374,11 +372,11 @@ done:
 *
 ----------------------------------------------------------------*/
 
-static int prism2mib_bytearea2pstr(mibrec_t *mib,
+static int prism2mib_bytearea2pstr(mibrec_t * mib,
 				   int isget,
-				   wlandevice_t *wlandev,
-				   hfa384x_t *hw,
-				   p80211msg_dot11req_mibset_t *msg,
+				   wlandevice_t * wlandev,
+				   hfa384x_t * hw,
+				   p80211msg_dot11req_mibset_t * msg,
 				   void *data)
 {
 	int result;
@@ -424,11 +422,11 @@ static int prism2mib_bytearea2pstr(mibrec_t *mib,
 *
 ----------------------------------------------------------------*/
 
-static int prism2mib_uint32(mibrec_t *mib,
+static int prism2mib_uint32(mibrec_t * mib,
 			    int isget,
-			    wlandevice_t *wlandev,
-			    hfa384x_t *hw,
-			    p80211msg_dot11req_mibset_t *msg, void *data)
+			    wlandevice_t * wlandev,
+			    hfa384x_t * hw,
+			    p80211msg_dot11req_mibset_t * msg, void *data)
 {
 	int result;
 	u32 *uint32 = (u32 *) data;
@@ -471,11 +469,11 @@ static int prism2mib_uint32(mibrec_t *mib,
 *
 ----------------------------------------------------------------*/
 
-static int prism2mib_flag(mibrec_t *mib,
+static int prism2mib_flag(mibrec_t * mib,
 			  int isget,
-			  wlandevice_t *wlandev,
-			  hfa384x_t *hw,
-			  p80211msg_dot11req_mibset_t *msg, void *data)
+			  wlandevice_t * wlandev,
+			  hfa384x_t * hw,
+			  p80211msg_dot11req_mibset_t * msg, void *data)
 {
 	int result;
 	u32 *uint32 = (u32 *) data;
@@ -528,11 +526,11 @@ static int prism2mib_flag(mibrec_t *mib,
 *
 ----------------------------------------------------------------*/
 
-static int prism2mib_wepdefaultkey(mibrec_t *mib,
+static int prism2mib_wepdefaultkey(mibrec_t * mib,
 				   int isget,
-				   wlandevice_t *wlandev,
-				   hfa384x_t *hw,
-				   p80211msg_dot11req_mibset_t *msg,
+				   wlandevice_t * wlandev,
+				   hfa384x_t * hw,
+				   p80211msg_dot11req_mibset_t * msg,
 				   void *data)
 {
 	int result;
@@ -578,11 +576,11 @@ static int prism2mib_wepdefaultkey(mibrec_t *mib,
 *
 ----------------------------------------------------------------*/
 
-static int prism2mib_privacyinvoked(mibrec_t *mib,
+static int prism2mib_privacyinvoked(mibrec_t * mib,
 				    int isget,
-				    wlandevice_t *wlandev,
-				    hfa384x_t *hw,
-				    p80211msg_dot11req_mibset_t *msg,
+				    wlandevice_t * wlandev,
+				    hfa384x_t * hw,
+				    p80211msg_dot11req_mibset_t * msg,
 				    void *data)
 {
 	int result;
@@ -624,11 +622,11 @@ static int prism2mib_privacyinvoked(mibrec_t *mib,
 *
 ----------------------------------------------------------------*/
 
-static int prism2mib_excludeunencrypted(mibrec_t *mib,
+static int prism2mib_excludeunencrypted(mibrec_t * mib,
 					int isget,
-					wlandevice_t *wlandev,
-					hfa384x_t *hw,
-					p80211msg_dot11req_mibset_t *msg,
+					wlandevice_t * wlandev,
+					hfa384x_t * hw,
+					p80211msg_dot11req_mibset_t * msg,
 					void *data)
 {
 	int result;
@@ -663,11 +661,11 @@ static int prism2mib_excludeunencrypted(mibrec_t *mib,
 *
 ----------------------------------------------------------------*/
 
-static int prism2mib_fragmentationthreshold(mibrec_t *mib,
+static int prism2mib_fragmentationthreshold(mibrec_t * mib,
 					    int isget,
-					    wlandevice_t *wlandev,
-					    hfa384x_t *hw,
-					    p80211msg_dot11req_mibset_t *msg,
+					    wlandevice_t * wlandev,
+					    hfa384x_t * hw,
+					    p80211msg_dot11req_mibset_t * msg,
 					    void *data)
 {
 	int result;
@@ -712,11 +710,11 @@ static int prism2mib_fragmentationthreshold(mibrec_t *mib,
 *
 ----------------------------------------------------------------*/
 
-static int prism2mib_priv(mibrec_t *mib,
+static int prism2mib_priv(mibrec_t * mib,
 			  int isget,
-			  wlandevice_t *wlandev,
-			  hfa384x_t *hw,
-			  p80211msg_dot11req_mibset_t *msg, void *data)
+			  wlandevice_t * wlandev,
+			  hfa384x_t * hw,
+			  p80211msg_dot11req_mibset_t * msg, void *data)
 {
 	p80211pstrd_t *pstr = (p80211pstrd_t *) data;
 
@@ -728,7 +726,7 @@ static int prism2mib_priv(mibrec_t *mib,
 			if (isget) {
 				hfa384x_drvr_getconfig(hw,
 						       HFA384x_RID_CNFWPADATA,
-						       (u8 *)&wpa,
+						       (u8 *) & wpa,
 						       sizeof(wpa));
 				pstr->len = le16_to_cpu(wpa.datalen);
 				memcpy(pstr->data, wpa.data, pstr->len);
@@ -739,7 +737,7 @@ static int prism2mib_priv(mibrec_t *mib,
 				result =
 				    hfa384x_drvr_setconfig(hw,
 							   HFA384x_RID_CNFWPADATA,
-							   (u8 *)&wpa,
+							   (u8 *) & wpa,
 							   sizeof(wpa));
 			}
 			break;
@@ -766,7 +764,7 @@ static int prism2mib_priv(mibrec_t *mib,
 *
 ----------------------------------------------------------------*/
 
-void prism2mgmt_pstr2bytestr(hfa384x_bytestr_t *bytestr, p80211pstrd_t *pstr)
+void prism2mgmt_pstr2bytestr(hfa384x_bytestr_t * bytestr, p80211pstrd_t * pstr)
 {
 	bytestr->len = cpu_to_le16((u16) (pstr->len));
 	memcpy(bytestr->data, pstr->data, pstr->len);
@@ -787,7 +785,7 @@ void prism2mgmt_pstr2bytestr(hfa384x_bytestr_t *bytestr, p80211pstrd_t *pstr)
 *
 ----------------------------------------------------------------*/
 
-void prism2mgmt_pstr2bytearea(u8 *bytearea, p80211pstrd_t *pstr)
+void prism2mgmt_pstr2bytearea(u8 * bytearea, p80211pstrd_t * pstr)
 {
 	memcpy(bytearea, pstr->data, pstr->len);
 }
@@ -807,7 +805,7 @@ void prism2mgmt_pstr2bytearea(u8 *bytearea, p80211pstrd_t *pstr)
 *
 ----------------------------------------------------------------*/
 
-void prism2mgmt_bytestr2pstr(hfa384x_bytestr_t *bytestr, p80211pstrd_t *pstr)
+void prism2mgmt_bytestr2pstr(hfa384x_bytestr_t * bytestr, p80211pstrd_t * pstr)
 {
 	pstr->len = (u8) (le16_to_cpu((u16) (bytestr->len)));
 	memcpy(pstr->data, bytestr->data, pstr->len);
@@ -828,13 +826,8 @@ void prism2mgmt_bytestr2pstr(hfa384x_bytestr_t *bytestr, p80211pstrd_t *pstr)
 *
 ----------------------------------------------------------------*/
 
-void prism2mgmt_bytearea2pstr(u8 *bytearea, p80211pstrd_t *pstr, int len)
+void prism2mgmt_bytearea2pstr(u8 * bytearea, p80211pstrd_t * pstr, int len)
 {
 	pstr->len = (u8) len;
 	memcpy(pstr->data, bytearea, len);
 }
-
-
-
-
-
diff --git a/drivers/staging/wlan-ng/prism2sta.c b/drivers/staging/wlan-ng/prism2sta.c
index 9d57f82f4a2..f493cf430db 100644
--- a/drivers/staging/wlan-ng/prism2sta.c
+++ b/drivers/staging/wlan-ng/prism2sta.c
@@ -127,37 +127,37 @@ MODULE_PARM_DESC(prism2_reset_settletime, "reset settle time in ms");
 
 MODULE_LICENSE("Dual MPL/GPL");
 
-static int prism2sta_open(wlandevice_t *wlandev);
-static int prism2sta_close(wlandevice_t *wlandev);
-static void prism2sta_reset(wlandevice_t *wlandev);
-static int prism2sta_txframe(wlandevice_t *wlandev, struct sk_buff *skb,
-			     p80211_hdr_t *p80211_hdr,
-			     p80211_metawep_t *p80211_wep);
-static int prism2sta_mlmerequest(wlandevice_t *wlandev, p80211msg_t *msg);
-static int prism2sta_getcardinfo(wlandevice_t *wlandev);
-static int prism2sta_globalsetup(wlandevice_t *wlandev);
-static int prism2sta_setmulticast(wlandevice_t *wlandev, netdevice_t *dev);
-
-static void prism2sta_inf_handover(wlandevice_t *wlandev,
-				   hfa384x_InfFrame_t *inf);
-static void prism2sta_inf_tallies(wlandevice_t *wlandev,
-				  hfa384x_InfFrame_t *inf);
-static void prism2sta_inf_hostscanresults(wlandevice_t *wlandev,
-					  hfa384x_InfFrame_t *inf);
-static void prism2sta_inf_scanresults(wlandevice_t *wlandev,
-				      hfa384x_InfFrame_t *inf);
-static void prism2sta_inf_chinforesults(wlandevice_t *wlandev,
-					hfa384x_InfFrame_t *inf);
-static void prism2sta_inf_linkstatus(wlandevice_t *wlandev,
-				     hfa384x_InfFrame_t *inf);
-static void prism2sta_inf_assocstatus(wlandevice_t *wlandev,
-				      hfa384x_InfFrame_t *inf);
-static void prism2sta_inf_authreq(wlandevice_t *wlandev,
-				  hfa384x_InfFrame_t *inf);
-static void prism2sta_inf_authreq_defer(wlandevice_t *wlandev,
-					hfa384x_InfFrame_t *inf);
-static void prism2sta_inf_psusercnt(wlandevice_t *wlandev,
-				    hfa384x_InfFrame_t *inf);
+static int prism2sta_open(wlandevice_t * wlandev);
+static int prism2sta_close(wlandevice_t * wlandev);
+static void prism2sta_reset(wlandevice_t * wlandev);
+static int prism2sta_txframe(wlandevice_t * wlandev, struct sk_buff *skb,
+			     p80211_hdr_t * p80211_hdr,
+			     p80211_metawep_t * p80211_wep);
+static int prism2sta_mlmerequest(wlandevice_t * wlandev, p80211msg_t * msg);
+static int prism2sta_getcardinfo(wlandevice_t * wlandev);
+static int prism2sta_globalsetup(wlandevice_t * wlandev);
+static int prism2sta_setmulticast(wlandevice_t * wlandev, netdevice_t * dev);
+
+static void prism2sta_inf_handover(wlandevice_t * wlandev,
+				   hfa384x_InfFrame_t * inf);
+static void prism2sta_inf_tallies(wlandevice_t * wlandev,
+				  hfa384x_InfFrame_t * inf);
+static void prism2sta_inf_hostscanresults(wlandevice_t * wlandev,
+					  hfa384x_InfFrame_t * inf);
+static void prism2sta_inf_scanresults(wlandevice_t * wlandev,
+				      hfa384x_InfFrame_t * inf);
+static void prism2sta_inf_chinforesults(wlandevice_t * wlandev,
+					hfa384x_InfFrame_t * inf);
+static void prism2sta_inf_linkstatus(wlandevice_t * wlandev,
+				     hfa384x_InfFrame_t * inf);
+static void prism2sta_inf_assocstatus(wlandevice_t * wlandev,
+				      hfa384x_InfFrame_t * inf);
+static void prism2sta_inf_authreq(wlandevice_t * wlandev,
+				  hfa384x_InfFrame_t * inf);
+static void prism2sta_inf_authreq_defer(wlandevice_t * wlandev,
+					hfa384x_InfFrame_t * inf);
+static void prism2sta_inf_psusercnt(wlandevice_t * wlandev,
+				    hfa384x_InfFrame_t * inf);
 
 /*----------------------------------------------------------------
 * prism2sta_open
@@ -180,7 +180,7 @@ static void prism2sta_inf_psusercnt(wlandevice_t *wlandev,
 * Call context:
 *	process thread
 ----------------------------------------------------------------*/
-static int prism2sta_open(wlandevice_t *wlandev)
+static int prism2sta_open(wlandevice_t * wlandev)
 {
 	/* We don't currently have to do anything else.
 	 * The setup of the MAC should be subsequently completed via
@@ -214,7 +214,7 @@ static int prism2sta_open(wlandevice_t *wlandev)
 * Call context:
 *	process thread
 ----------------------------------------------------------------*/
-static int prism2sta_close(wlandevice_t *wlandev)
+static int prism2sta_close(wlandevice_t * wlandev)
 {
 	/* We don't currently have to do anything else.
 	 * Higher layers know we're not ready from dev->start==0 and
@@ -242,7 +242,7 @@ static int prism2sta_close(wlandevice_t *wlandev)
 * Call context:
 *	process thread
 ----------------------------------------------------------------*/
-static void prism2sta_reset(wlandevice_t *wlandev)
+static void prism2sta_reset(wlandevice_t * wlandev)
 {
 	return;
 }
@@ -268,9 +268,9 @@ static void prism2sta_reset(wlandevice_t *wlandev)
 * Call context:
 *	process thread
 ----------------------------------------------------------------*/
-static int prism2sta_txframe(wlandevice_t *wlandev, struct sk_buff *skb,
-			     p80211_hdr_t *p80211_hdr,
-			     p80211_metawep_t *p80211_wep)
+static int prism2sta_txframe(wlandevice_t * wlandev, struct sk_buff *skb,
+			     p80211_hdr_t * p80211_hdr,
+			     p80211_metawep_t * p80211_wep)
 {
 	hfa384x_t *hw = (hfa384x_t *) wlandev->priv;
 	int result;
@@ -310,7 +310,7 @@ static int prism2sta_txframe(wlandevice_t *wlandev, struct sk_buff *skb,
 * Call context:
 *	process thread
 ----------------------------------------------------------------*/
-static int prism2sta_mlmerequest(wlandevice_t *wlandev, p80211msg_t *msg)
+static int prism2sta_mlmerequest(wlandevice_t * wlandev, p80211msg_t * msg)
 {
 	hfa384x_t *hw = (hfa384x_t *) wlandev->priv;
 
@@ -401,12 +401,9 @@ static int prism2sta_mlmerequest(wlandevice_t *wlandev, p80211msg_t *msg)
 			qualmsg->noise.status =
 			    P80211ENUM_msgitem_status_data_ok;
 
-			qualmsg->link.data =
-			    le16_to_cpu(hw->qual.CQ_currBSS);
-			qualmsg->level.data =
-			    le16_to_cpu(hw->qual.ASL_currBSS);
-			qualmsg->noise.data =
-			    le16_to_cpu(hw->qual.ANL_currFC);
+			qualmsg->link.data = le16_to_cpu(hw->qual.CQ_currBSS);
+			qualmsg->level.data = le16_to_cpu(hw->qual.ASL_currBSS);
+			qualmsg->noise.data = le16_to_cpu(hw->qual.ANL_currFC);
 
 			break;
 		}
@@ -440,7 +437,7 @@ static int prism2sta_mlmerequest(wlandevice_t *wlandev, p80211msg_t *msg)
 *	process thread  (usually)
 *	interrupt
 ----------------------------------------------------------------*/
-u32 prism2sta_ifstate(wlandevice_t *wlandev, u32 ifstate)
+u32 prism2sta_ifstate(wlandevice_t * wlandev, u32 ifstate)
 {
 	hfa384x_t *hw = (hfa384x_t *) wlandev->priv;
 	u32 result;
@@ -448,7 +445,7 @@ u32 prism2sta_ifstate(wlandevice_t *wlandev, u32 ifstate)
 	result = P80211ENUM_resultcode_implementation_failure;
 
 	pr_debug("Current MSD state(%d), requesting(%d)\n",
-	       wlandev->msdstate, ifstate);
+		 wlandev->msdstate, ifstate);
 	switch (ifstate) {
 	case P80211ENUM_ifstate_fwload:
 		switch (wlandev->msdstate) {
@@ -610,7 +607,7 @@ u32 prism2sta_ifstate(wlandevice_t *wlandev, u32 ifstate)
 * Call context:
 *	Either.
 ----------------------------------------------------------------*/
-static int prism2sta_getcardinfo(wlandevice_t *wlandev)
+static int prism2sta_getcardinfo(wlandevice_t * wlandev)
 {
 	int result = 0;
 	hfa384x_t *hw = (hfa384x_t *) wlandev->priv;
@@ -811,10 +808,8 @@ static int prism2sta_getcardinfo(wlandevice_t *wlandev)
 	   fields in byte order */
 	hw->cap_act_pri_cfi.role = le16_to_cpu(hw->cap_act_pri_cfi.role);
 	hw->cap_act_pri_cfi.id = le16_to_cpu(hw->cap_act_pri_cfi.id);
-	hw->cap_act_pri_cfi.variant =
-	    le16_to_cpu(hw->cap_act_pri_cfi.variant);
-	hw->cap_act_pri_cfi.bottom =
-	    le16_to_cpu(hw->cap_act_pri_cfi.bottom);
+	hw->cap_act_pri_cfi.variant = le16_to_cpu(hw->cap_act_pri_cfi.variant);
+	hw->cap_act_pri_cfi.bottom = le16_to_cpu(hw->cap_act_pri_cfi.bottom);
 	hw->cap_act_pri_cfi.top = le16_to_cpu(hw->cap_act_pri_cfi.top);
 
 	printk(KERN_INFO
@@ -836,10 +831,8 @@ static int prism2sta_getcardinfo(wlandevice_t *wlandev)
 	   fields in byte order */
 	hw->cap_act_sta_cfi.role = le16_to_cpu(hw->cap_act_sta_cfi.role);
 	hw->cap_act_sta_cfi.id = le16_to_cpu(hw->cap_act_sta_cfi.id);
-	hw->cap_act_sta_cfi.variant =
-	    le16_to_cpu(hw->cap_act_sta_cfi.variant);
-	hw->cap_act_sta_cfi.bottom =
-	    le16_to_cpu(hw->cap_act_sta_cfi.bottom);
+	hw->cap_act_sta_cfi.variant = le16_to_cpu(hw->cap_act_sta_cfi.variant);
+	hw->cap_act_sta_cfi.bottom = le16_to_cpu(hw->cap_act_sta_cfi.bottom);
 	hw->cap_act_sta_cfi.top = le16_to_cpu(hw->cap_act_sta_cfi.top);
 
 	printk(KERN_INFO
@@ -861,10 +854,8 @@ static int prism2sta_getcardinfo(wlandevice_t *wlandev)
 	   fields in byte order */
 	hw->cap_act_sta_mfi.role = le16_to_cpu(hw->cap_act_sta_mfi.role);
 	hw->cap_act_sta_mfi.id = le16_to_cpu(hw->cap_act_sta_mfi.id);
-	hw->cap_act_sta_mfi.variant =
-	    le16_to_cpu(hw->cap_act_sta_mfi.variant);
-	hw->cap_act_sta_mfi.bottom =
-	    le16_to_cpu(hw->cap_act_sta_mfi.bottom);
+	hw->cap_act_sta_mfi.variant = le16_to_cpu(hw->cap_act_sta_mfi.variant);
+	hw->cap_act_sta_mfi.bottom = le16_to_cpu(hw->cap_act_sta_mfi.bottom);
 	hw->cap_act_sta_mfi.top = le16_to_cpu(hw->cap_act_sta_mfi.top);
 
 	printk(KERN_INFO
@@ -940,7 +931,7 @@ done:
 * Call context:
 *	process thread
 ----------------------------------------------------------------*/
-static int prism2sta_globalsetup(wlandevice_t *wlandev)
+static int prism2sta_globalsetup(wlandevice_t * wlandev)
 {
 	hfa384x_t *hw = (hfa384x_t *) wlandev->priv;
 
@@ -949,7 +940,7 @@ static int prism2sta_globalsetup(wlandevice_t *wlandev)
 					WLAN_DATA_MAXLEN);
 }
 
-static int prism2sta_setmulticast(wlandevice_t *wlandev, netdevice_t *dev)
+static int prism2sta_setmulticast(wlandevice_t * wlandev, netdevice_t * dev)
 {
 	int result = 0;
 	hfa384x_t *hw = (hfa384x_t *) wlandev->priv;
@@ -990,8 +981,8 @@ exit:
 * Call context:
 *	interrupt
 ----------------------------------------------------------------*/
-static void prism2sta_inf_handover(wlandevice_t *wlandev,
-				   hfa384x_InfFrame_t *inf)
+static void prism2sta_inf_handover(wlandevice_t * wlandev,
+				   hfa384x_InfFrame_t * inf)
 {
 	pr_debug("received infoframe:HANDOVER (unhandled)\n");
 	return;
@@ -1014,8 +1005,8 @@ static void prism2sta_inf_handover(wlandevice_t *wlandev,
 * Call context:
 *	interrupt
 ----------------------------------------------------------------*/
-static void prism2sta_inf_tallies(wlandevice_t *wlandev,
-				  hfa384x_InfFrame_t *inf)
+static void prism2sta_inf_tallies(wlandevice_t * wlandev,
+				  hfa384x_InfFrame_t * inf)
 {
 	hfa384x_t *hw = (hfa384x_t *) wlandev->priv;
 	u16 *src16;
@@ -1031,13 +1022,13 @@ static void prism2sta_inf_tallies(wlandevice_t *wlandev,
 
 	cnt = sizeof(hfa384x_CommTallies32_t) / sizeof(u32);
 	if (inf->framelen > 22) {
-		dst = (u32 *)&hw->tallies;
-		src32 = (u32 *)&inf->info.commtallies32;
+		dst = (u32 *) & hw->tallies;
+		src32 = (u32 *) & inf->info.commtallies32;
 		for (i = 0; i < cnt; i++, dst++, src32++)
 			*dst += le32_to_cpu(*src32);
 	} else {
-		dst = (u32 *)&hw->tallies;
-		src16 = (u16 *)&inf->info.commtallies16;
+		dst = (u32 *) & hw->tallies;
+		src16 = (u16 *) & inf->info.commtallies16;
 		for (i = 0; i < cnt; i++, dst++, src16++)
 			*dst += le16_to_cpu(*src16);
 	}
@@ -1062,8 +1053,8 @@ static void prism2sta_inf_tallies(wlandevice_t *wlandev,
 * Call context:
 *	interrupt
 ----------------------------------------------------------------*/
-static void prism2sta_inf_scanresults(wlandevice_t *wlandev,
-				      hfa384x_InfFrame_t *inf)
+static void prism2sta_inf_scanresults(wlandevice_t * wlandev,
+				      hfa384x_InfFrame_t * inf)
 {
 
 	hfa384x_t *hw = (hfa384x_t *) wlandev->priv;
@@ -1080,14 +1071,14 @@ static void prism2sta_inf_scanresults(wlandevice_t *wlandev,
 
 	/* Print em */
 	pr_debug("rx scanresults, reason=%d, nbss=%d:\n",
-	       inf->info.scanresult.scanreason, nbss);
+		 inf->info.scanresult.scanreason, nbss);
 	for (i = 0; i < nbss; i++) {
 		pr_debug("chid=%d anl=%d sl=%d bcnint=%d\n",
-		       sr->result[i].chid,
-		       sr->result[i].anl,
-		       sr->result[i].sl, sr->result[i].bcnint);
+			 sr->result[i].chid,
+			 sr->result[i].anl,
+			 sr->result[i].sl, sr->result[i].bcnint);
 		pr_debug("  capinfo=0x%04x proberesp_rate=%d\n",
-		       sr->result[i].capinfo, sr->result[i].proberesp_rate);
+			 sr->result[i].capinfo, sr->result[i].proberesp_rate);
 	}
 	/* issue a join request */
 	joinreq.channel = sr->result[0].chid;
@@ -1120,8 +1111,8 @@ static void prism2sta_inf_scanresults(wlandevice_t *wlandev,
 * Call context:
 *	interrupt
 ----------------------------------------------------------------*/
-static void prism2sta_inf_hostscanresults(wlandevice_t *wlandev,
-					  hfa384x_InfFrame_t *inf)
+static void prism2sta_inf_hostscanresults(wlandevice_t * wlandev,
+					  hfa384x_InfFrame_t * inf)
 {
 	hfa384x_t *hw = (hfa384x_t *) wlandev->priv;
 	int nbss;
@@ -1162,8 +1153,8 @@ static void prism2sta_inf_hostscanresults(wlandevice_t *wlandev,
 * Call context:
 *	interrupt
 ----------------------------------------------------------------*/
-static void prism2sta_inf_chinforesults(wlandevice_t *wlandev,
-					hfa384x_InfFrame_t *inf)
+static void prism2sta_inf_chinforesults(wlandevice_t * wlandev,
+					hfa384x_InfFrame_t * inf)
 {
 	hfa384x_t *hw = (hfa384x_t *) wlandev->priv;
 	unsigned int i, n;
@@ -1174,29 +1165,26 @@ static void prism2sta_inf_chinforesults(wlandevice_t *wlandev,
 	for (i = 0, n = 0; i < HFA384x_CHINFORESULT_MAX; i++) {
 		if (hw->channel_info.results.scanchannels & (1 << i)) {
 			int channel =
-			    le16_to_cpu(inf->info.chinforesult.result[n].
-					    chid) - 1;
+			    le16_to_cpu(inf->info.chinforesult.result[n].chid) -
+			    1;
 			hfa384x_ChInfoResultSub_t *chinforesult =
 			    &hw->channel_info.results.result[channel];
 			chinforesult->chid = channel;
 			chinforesult->anl =
-			    le16_to_cpu(inf->info.chinforesult.result[n].
-					    anl);
+			    le16_to_cpu(inf->info.chinforesult.result[n].anl);
 			chinforesult->pnl =
-			    le16_to_cpu(inf->info.chinforesult.result[n].
-					    pnl);
+			    le16_to_cpu(inf->info.chinforesult.result[n].pnl);
 			chinforesult->active =
 			    le16_to_cpu(inf->info.chinforesult.result[n].
-					    active);
-			printk(KERN_DEBUG
-			       "chinfo: channel %d, %s level (avg/peak)=%d/%d dB, pcf %d\n",
-			       channel + 1,
-			       chinforesult->
-			       active & HFA384x_CHINFORESULT_BSSACTIVE ?
-			       "signal" : "noise", chinforesult->anl,
-			       chinforesult->pnl,
-			       chinforesult->
-			       active & HFA384x_CHINFORESULT_PCFACTIVE ? 1 : 0);
+					active);
+			pr_debug
+			    ("chinfo: channel %d, %s level (avg/peak)=%d/%d dB, pcf %d\n",
+			     channel + 1,
+			     chinforesult->
+			     active & HFA384x_CHINFORESULT_BSSACTIVE ? "signal"
+			     : "noise", chinforesult->anl, chinforesult->pnl,
+			     chinforesult->
+			     active & HFA384x_CHINFORESULT_PCFACTIVE ? 1 : 0);
 			n++;
 		}
 	}
@@ -1276,9 +1264,9 @@ void prism2sta_processing_defer(struct work_struct *data)
 							wlandev->bssid,
 							WLAN_BSSID_LEN);
 			if (result) {
-				printk(KERN_DEBUG
-				       "getconfig(0x%02x) failed, result = %d\n",
-				       HFA384x_RID_CURRENTBSSID, result);
+				pr_debug
+				    ("getconfig(0x%02x) failed, result = %d\n",
+				     HFA384x_RID_CURRENTBSSID, result);
 				goto failed;
 			}
 
@@ -1286,23 +1274,23 @@ void prism2sta_processing_defer(struct work_struct *data)
 							HFA384x_RID_CURRENTSSID,
 							&ssid, sizeof(ssid));
 			if (result) {
-				printk(KERN_DEBUG
-				       "getconfig(0x%02x) failed, result = %d\n",
-				       HFA384x_RID_CURRENTSSID, result);
+				pr_debug
+				    ("getconfig(0x%02x) failed, result = %d\n",
+				     HFA384x_RID_CURRENTSSID, result);
 				goto failed;
 			}
-			prism2mgmt_bytestr2pstr((hfa384x_bytestr_t *)&ssid,
-						(p80211pstrd_t *)&wlandev->
-						ssid);
+			prism2mgmt_bytestr2pstr((hfa384x_bytestr_t *) & ssid,
+						(p80211pstrd_t *) &
+						wlandev->ssid);
 
 			/* Collect the port status */
 			result = hfa384x_drvr_getconfig16(hw,
 							  HFA384x_RID_PORTSTATUS,
 							  &portstatus);
 			if (result) {
-				printk(KERN_DEBUG
-				       "getconfig(0x%02x) failed, result = %d\n",
-				       HFA384x_RID_PORTSTATUS, result);
+				pr_debug
+				    ("getconfig(0x%02x) failed, result = %d\n",
+				     HFA384x_RID_PORTSTATUS, result);
 				goto failed;
 			}
 			wlandev->macmode =
@@ -1366,9 +1354,8 @@ void prism2sta_processing_defer(struct work_struct *data)
 						HFA384x_RID_CURRENTBSSID,
 						wlandev->bssid, WLAN_BSSID_LEN);
 		if (result) {
-			printk(KERN_DEBUG
-			       "getconfig(0x%02x) failed, result = %d\n",
-			       HFA384x_RID_CURRENTBSSID, result);
+			pr_debug("getconfig(0x%02x) failed, result = %d\n",
+				 HFA384x_RID_CURRENTBSSID, result);
 			goto failed;
 		}
 
@@ -1376,13 +1363,12 @@ void prism2sta_processing_defer(struct work_struct *data)
 						HFA384x_RID_CURRENTSSID,
 						&ssid, sizeof(ssid));
 		if (result) {
-			printk(KERN_DEBUG
-			       "getconfig(0x%02x) failed, result = %d\n",
-			       HFA384x_RID_CURRENTSSID, result);
+			pr_debug("getconfig(0x%02x) failed, result = %d\n",
+				 HFA384x_RID_CURRENTSSID, result);
 			goto failed;
 		}
-		prism2mgmt_bytestr2pstr((hfa384x_bytestr_t *)&ssid,
-					(p80211pstrd_t *)&wlandev->ssid);
+		prism2mgmt_bytestr2pstr((hfa384x_bytestr_t *) & ssid,
+					(p80211pstrd_t *) & wlandev->ssid);
 
 		hw->link_status = HFA384x_LINK_CONNECTED;
 		netif_carrier_on(wlandev->netdev);
@@ -1482,8 +1468,8 @@ failed:
 * Call context:
 *	interrupt
 ----------------------------------------------------------------*/
-static void prism2sta_inf_linkstatus(wlandevice_t *wlandev,
-				     hfa384x_InfFrame_t *inf)
+static void prism2sta_inf_linkstatus(wlandevice_t * wlandev,
+				     hfa384x_InfFrame_t * inf)
 {
 	hfa384x_t *hw = (hfa384x_t *) wlandev->priv;
 
@@ -1512,8 +1498,8 @@ static void prism2sta_inf_linkstatus(wlandevice_t *wlandev,
 * Call context:
 *	interrupt
 ----------------------------------------------------------------*/
-static void prism2sta_inf_assocstatus(wlandevice_t *wlandev,
-				      hfa384x_InfFrame_t *inf)
+static void prism2sta_inf_assocstatus(wlandevice_t * wlandev,
+				      hfa384x_InfFrame_t * inf)
 {
 	hfa384x_t *hw = (hfa384x_t *) wlandev->priv;
 	hfa384x_AssocStatus_t rec;
@@ -1574,8 +1560,8 @@ static void prism2sta_inf_assocstatus(wlandevice_t *wlandev,
 *	interrupt
 *
 ----------------------------------------------------------------*/
-static void prism2sta_inf_authreq(wlandevice_t *wlandev,
-				  hfa384x_InfFrame_t *inf)
+static void prism2sta_inf_authreq(wlandevice_t * wlandev,
+				  hfa384x_InfFrame_t * inf)
 {
 	hfa384x_t *hw = (hfa384x_t *) wlandev->priv;
 	struct sk_buff *skb;
@@ -1589,8 +1575,8 @@ static void prism2sta_inf_authreq(wlandevice_t *wlandev,
 	}
 }
 
-static void prism2sta_inf_authreq_defer(wlandevice_t *wlandev,
-					hfa384x_InfFrame_t *inf)
+static void prism2sta_inf_authreq_defer(wlandevice_t * wlandev,
+					hfa384x_InfFrame_t * inf)
 {
 	hfa384x_t *hw = (hfa384x_t *) wlandev->priv;
 	hfa384x_authenticateStation_data_t rec;
@@ -1763,8 +1749,8 @@ static void prism2sta_inf_authreq_defer(wlandevice_t *wlandev,
 * Call context:
 *	interrupt
 ----------------------------------------------------------------*/
-static void prism2sta_inf_psusercnt(wlandevice_t *wlandev,
-				    hfa384x_InfFrame_t *inf)
+static void prism2sta_inf_psusercnt(wlandevice_t * wlandev,
+				    hfa384x_InfFrame_t * inf)
 {
 	hfa384x_t *hw = (hfa384x_t *) wlandev->priv;
 
@@ -1790,7 +1776,7 @@ static void prism2sta_inf_psusercnt(wlandevice_t *wlandev,
 * Call context:
 *	interrupt
 ----------------------------------------------------------------*/
-void prism2sta_ev_info(wlandevice_t *wlandev, hfa384x_InfFrame_t *inf)
+void prism2sta_ev_info(wlandevice_t * wlandev, hfa384x_InfFrame_t * inf)
 {
 	inf->infotype = le16_to_cpu(inf->infotype);
 	/* Dispatch */
@@ -1858,7 +1844,7 @@ void prism2sta_ev_info(wlandevice_t *wlandev, hfa384x_InfFrame_t *inf)
 * Call context:
 *	interrupt
 ----------------------------------------------------------------*/
-void prism2sta_ev_txexc(wlandevice_t *wlandev, u16 status)
+void prism2sta_ev_txexc(wlandevice_t * wlandev, u16 status)
 {
 	pr_debug("TxExc status=0x%x.\n", status);
 
@@ -1881,7 +1867,7 @@ void prism2sta_ev_txexc(wlandevice_t *wlandev, u16 status)
 * Call context:
 *	interrupt
 ----------------------------------------------------------------*/
-void prism2sta_ev_tx(wlandevice_t *wlandev, u16 status)
+void prism2sta_ev_tx(wlandevice_t * wlandev, u16 status)
 {
 	pr_debug("Tx Complete, status=0x%04x\n", status);
 	/* update linux network stats */
@@ -1905,7 +1891,7 @@ void prism2sta_ev_tx(wlandevice_t *wlandev, u16 status)
 * Call context:
 *	interrupt
 ----------------------------------------------------------------*/
-void prism2sta_ev_rx(wlandevice_t *wlandev, struct sk_buff *skb)
+void prism2sta_ev_rx(wlandevice_t * wlandev, struct sk_buff *skb)
 {
 	p80211netdev_rx(wlandev, skb);
 	return;
@@ -1927,7 +1913,7 @@ void prism2sta_ev_rx(wlandevice_t *wlandev, struct sk_buff *skb)
 * Call context:
 *	interrupt
 ----------------------------------------------------------------*/
-void prism2sta_ev_alloc(wlandevice_t *wlandev)
+void prism2sta_ev_alloc(wlandevice_t * wlandev)
 {
 	netif_wake_queue(wlandev->netdev);
 	return;
@@ -2020,9 +2006,9 @@ void prism2sta_commsqual_defer(struct work_struct *data)
 		}
 
 		pr_debug("commsqual %d %d %d\n",
-		       le16_to_cpu(hw->qual.CQ_currBSS),
-		       le16_to_cpu(hw->qual.ASL_currBSS),
-		       le16_to_cpu(hw->qual.ANL_currFC));
+			 le16_to_cpu(hw->qual.CQ_currBSS),
+			 le16_to_cpu(hw->qual.ASL_currBSS),
+			 le16_to_cpu(hw->qual.ANL_currFC));
 	}
 
 	/* Lastly, we need to make sure the BSSID didn't change on us */
@@ -2030,9 +2016,8 @@ void prism2sta_commsqual_defer(struct work_struct *data)
 					HFA384x_RID_CURRENTBSSID,
 					wlandev->bssid, WLAN_BSSID_LEN);
 	if (result) {
-		printk(KERN_DEBUG
-		       "getconfig(0x%02x) failed, result = %d\n",
-		       HFA384x_RID_CURRENTBSSID, result);
+		pr_debug("getconfig(0x%02x) failed, result = %d\n",
+			 HFA384x_RID_CURRENTBSSID, result);
 		goto done;
 	}
 
@@ -2040,13 +2025,12 @@ void prism2sta_commsqual_defer(struct work_struct *data)
 					HFA384x_RID_CURRENTSSID,
 					&ssid, sizeof(ssid));
 	if (result) {
-		printk(KERN_DEBUG
-		       "getconfig(0x%02x) failed, result = %d\n",
-		       HFA384x_RID_CURRENTSSID, result);
+		pr_debug("getconfig(0x%02x) failed, result = %d\n",
+			 HFA384x_RID_CURRENTSSID, result);
 		goto done;
 	}
-	prism2mgmt_bytestr2pstr((hfa384x_bytestr_t *)&ssid,
-				(p80211pstrd_t *)&wlandev->ssid);
+	prism2mgmt_bytestr2pstr((hfa384x_bytestr_t *) & ssid,
+				(p80211pstrd_t *) & wlandev->ssid);
 
 	/* Reschedule timer */
 	mod_timer(&hw->commsqual_timer, jiffies + HZ);
diff --git a/drivers/staging/wlan-ng/prism2usb.c b/drivers/staging/wlan-ng/prism2usb.c
index d8a12982135..7aa703ce9dd 100644
--- a/drivers/staging/wlan-ng/prism2usb.c
+++ b/drivers/staging/wlan-ng/prism2usb.c
@@ -2,6 +2,7 @@
 #include "prism2mgmt.c"
 #include "prism2mib.c"
 #include "prism2sta.c"
+#include "prism2fw.c"
 
 #define PRISM_USB_DEVICE(vid, pid, name) \
            USB_DEVICE(vid, pid),  \
@@ -23,9 +24,8 @@ static struct usb_device_id usb_prism_tbl[] = {
 	 (0x066b, 0x2213, "Linksys WUSB12v1.1 11Mbps WLAN USB Adapter")},
 	{PRISM_USB_DEVICE
 	 (0x067c, 0x1022, "Siemens SpeedStream 1022 11Mbps WLAN USB Adapter")},
-	{PRISM_USB_DEVICE
-	 (0x049f, 0x0033,
-	  "Compaq/Intel W100 PRO/Wireless 11Mbps multiport WLAN Adapter")},
+	{PRISM_USB_DEVICE(0x049f, 0x0033,
+			  "Compaq/Intel W100 PRO/Wireless 11Mbps multiport WLAN Adapter")},
 	{PRISM_USB_DEVICE
 	 (0x0411, 0x0016, "Melco WLI-USB-S11 11Mbps WLAN Adapter")},
 	{PRISM_USB_DEVICE
@@ -153,15 +153,16 @@ static int prism2sta_probe_usb(struct usb_interface *interface,
 
 	wlandev->msdstate = WLAN_MSD_HWPRESENT;
 
+	/* Try and load firmware, then enable card before we register */
+	prism2_fwtry(dev, wlandev);
+	prism2sta_ifstate(wlandev, P80211ENUM_ifstate_enable);
+
 	if (register_wlandev(wlandev) != 0) {
 		printk(KERN_ERR "%s: register_wlandev() failed.\n", dev_info);
 		result = -EIO;
 		goto failed;
 	}
 
-/* enable the card */
-	prism2sta_ifstate(wlandev, P80211ENUM_ifstate_enable);
-
 	goto done;
 
 failed:
@@ -170,7 +171,6 @@ failed:
 	wlandev = NULL;
 
 done:
-	p80211_allow_ioctls(wlandev);
 	usb_set_intfdata(interface, wlandev);
 	return result;
 }
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index eecd2a0680a..93f7035d00a 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -77,7 +77,7 @@ static const struct hc_driver ps3_ehci_hc_driver = {
 	.port_handed_over	= ehci_port_handed_over,
 };
 
-static int ps3_ehci_probe(struct ps3_system_bus_device *dev)
+static int __devinit ps3_ehci_probe(struct ps3_system_bus_device *dev)
 {
 	int result;
 	struct usb_hcd *hcd;
@@ -225,7 +225,7 @@ static int ps3_ehci_remove(struct ps3_system_bus_device *dev)
 	return 0;
 }
 
-static int ps3_ehci_driver_register(struct ps3_system_bus_driver *drv)
+static int __init ps3_ehci_driver_register(struct ps3_system_bus_driver *drv)
 {
 	return firmware_has_feature(FW_FEATURE_PS3_LV1)
 		? ps3_system_bus_driver_register(drv)
diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c
index 1d56259c5db..700950455f4 100644
--- a/drivers/usb/host/ohci-ps3.c
+++ b/drivers/usb/host/ohci-ps3.c
@@ -75,7 +75,7 @@ static const struct hc_driver ps3_ohci_hc_driver = {
 #endif
 };
 
-static int ps3_ohci_probe(struct ps3_system_bus_device *dev)
+static int __devinit ps3_ohci_probe(struct ps3_system_bus_device *dev)
 {
 	int result;
 	struct usb_hcd *hcd;
@@ -224,7 +224,7 @@ static int ps3_ohci_remove(struct ps3_system_bus_device *dev)
 	return 0;
 }
 
-static int ps3_ohci_driver_register(struct ps3_system_bus_driver *drv)
+static int __init ps3_ohci_driver_register(struct ps3_system_bus_driver *drv)
 {
 	return firmware_has_feature(FW_FEATURE_PS3_LV1)
 		? ps3_system_bus_driver_register(drv)
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 932ffdbf86d..d6d65ef85f5 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1122,12 +1122,14 @@ config FB_INTEL
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_BOOT_VESA_SUPPORT
+	select FB_BOOT_VESA_SUPPORT if FB_INTEL = y
 	help
 	  This driver supports the on-board graphics built in to the Intel
           830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
           Say Y if you have and plan to use such a board.
 
+	  To make FB_INTELFB=Y work you need to say AGP_INTEL=y too.
+
 	  To compile this driver as a module, choose M here: the
 	  module will be called intelfb.
 
@@ -1460,7 +1462,7 @@ config FB_SIS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_BOOT_VESA_SUPPORT
+	select FB_BOOT_VESA_SUPPORT if FB_SIS = y
 	help
 	  This is the frame buffer device driver for the SiS 300, 315, 330
 	  and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
diff --git a/drivers/video/nvidia/nv_setup.c b/drivers/video/nvidia/nv_setup.c
index 135ae18bfce..eef2bb298d9 100644
--- a/drivers/video/nvidia/nv_setup.c
+++ b/drivers/video/nvidia/nv_setup.c
@@ -543,8 +543,7 @@ int NVCommonSetup(struct fb_info *info)
 		} else if (analog_on_B) {
 			CRTCnumber = outputBfromCRTC;
 			FlatPanel = 0;
-			printk("nvidiafb: CRTC %i"
-			       "appears to have a "
+			printk("nvidiafb: CRTC %i appears to have a "
 			       "CRT attached\n", CRTCnumber);
 		} else if (slaved_on_A) {
 			CRTCnumber = 0;
diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index 7a868bd16e0..ed7c8d0ddcc 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -124,7 +124,6 @@ struct xilinxfb_drvdata {
 						registers */
 
 	dcr_host_t      dcr_host;
-	unsigned int    dcr_start;
 	unsigned int    dcr_len;
 
 	void		*fb_virt;	/* virt. address of the frame buffer */
@@ -325,8 +324,8 @@ static int xilinxfb_assign(struct device *dev,
 					drvdata->regs);
 	}
 	/* Put a banner in the log (for DEBUG) */
-	dev_dbg(dev, "fb: phys=%p, virt=%p, size=%x\n",
-		(void *)drvdata->fb_phys, drvdata->fb_virt, fbsize);
+	dev_dbg(dev, "fb: phys=%llx, virt=%p, size=%x\n",
+		(unsigned long long)drvdata->fb_phys, drvdata->fb_virt, fbsize);
 
 	return 0;	/* success */
 
@@ -404,9 +403,7 @@ xilinxfb_of_probe(struct of_device *op, const struct of_device_id *match)
 	u32 tft_access;
 	struct xilinxfb_platform_data pdata;
 	struct resource res;
-	int size, rc;
-	int start = 0, len = 0;
-	dcr_host_t dcr_host;
+	int size, rc, start;
 	struct xilinxfb_drvdata *drvdata;
 
 	/* Copy with the default pdata (not a ptr reference!) */
@@ -414,35 +411,39 @@ xilinxfb_of_probe(struct of_device *op, const struct of_device_id *match)
 
 	dev_dbg(&op->dev, "xilinxfb_of_probe(%p, %p)\n", op, match);
 
+	/* Allocate the driver data region */
+	drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
+	if (!drvdata) {
+		dev_err(&op->dev, "Couldn't allocate device private record\n");
+		return -ENOMEM;
+	}
+
 	/*
 	 * To check whether the core is connected directly to DCR or PLB
 	 * interface and initialize the tft_access accordingly.
 	 */
 	p = (u32 *)of_get_property(op->node, "xlnx,dcr-splb-slave-if", NULL);
-
-	if (p)
-		tft_access = *p;
-	else
-		tft_access = 0;		/* For backward compatibility */
+	tft_access = p ? *p : 0;
 
 	/*
 	 * Fill the resource structure if its direct PLB interface
 	 * otherwise fill the dcr_host structure.
 	 */
 	if (tft_access) {
+		drvdata->flags |= PLB_ACCESS_FLAG;
 		rc = of_address_to_resource(op->node, 0, &res);
 		if (rc) {
 			dev_err(&op->dev, "invalid address\n");
-			return -ENODEV;
+			goto err;
 		}
-
 	} else {
+		res.start = 0;
 		start = dcr_resource_start(op->node, 0);
-		len = dcr_resource_len(op->node, 0);
-		dcr_host = dcr_map(op->node, start, len);
-		if (!DCR_MAP_OK(dcr_host)) {
-			dev_err(&op->dev, "invalid address\n");
-			return -ENODEV;
+		drvdata->dcr_len = dcr_resource_len(op->node, 0);
+		drvdata->dcr_host = dcr_map(op->node, start, drvdata->dcr_len);
+		if (!DCR_MAP_OK(drvdata->dcr_host)) {
+			dev_err(&op->dev, "invalid DCR address\n");
+			goto err;
 		}
 	}
 
@@ -467,26 +468,12 @@ xilinxfb_of_probe(struct of_device *op, const struct of_device_id *match)
 	if (of_find_property(op->node, "rotate-display", NULL))
 		pdata.rotate_screen = 1;
 
-	/* Allocate the driver data region */
-	drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
-	if (!drvdata) {
-		dev_err(&op->dev, "Couldn't allocate device private record\n");
-		return -ENOMEM;
-	}
 	dev_set_drvdata(&op->dev, drvdata);
+	return xilinxfb_assign(&op->dev, drvdata, res.start, &pdata);
 
-	if (tft_access)
-		drvdata->flags |= PLB_ACCESS_FLAG;
-
-	/* Arguments are passed based on the interface */
-	if (drvdata->flags & PLB_ACCESS_FLAG) {
-		return xilinxfb_assign(&op->dev, drvdata, res.start, &pdata);
-	} else {
-		drvdata->dcr_start = start;
-		drvdata->dcr_len = len;
-		drvdata->dcr_host = dcr_host;
-		return xilinxfb_assign(&op->dev, drvdata, 0, &pdata);
-	}
+ err:
+	kfree(drvdata);
+	return -ENODEV;
 }
 
 static int __devexit xilinxfb_of_remove(struct of_device *op)
diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
index a411702413d..6f8866d6a90 100644
--- a/drivers/w1/masters/w1-gpio.c
+++ b/drivers/w1/masters/w1-gpio.c
@@ -74,6 +74,9 @@ static int __init w1_gpio_probe(struct platform_device *pdev)
 	if (err)
 		goto free_gpio;
 
+	if (pdata->enable_external_pullup)
+		pdata->enable_external_pullup(1);
+
 	platform_set_drvdata(pdev, master);
 
 	return 0;
@@ -91,6 +94,9 @@ static int __exit w1_gpio_remove(struct platform_device *pdev)
 	struct w1_bus_master *master = platform_get_drvdata(pdev);
 	struct w1_gpio_platform_data *pdata = pdev->dev.platform_data;
 
+	if (pdata->enable_external_pullup)
+		pdata->enable_external_pullup(0);
+
 	w1_remove_master_device(master);
 	gpio_free(pdata->pin);
 	kfree(master);
@@ -98,12 +104,41 @@ static int __exit w1_gpio_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+
+static int w1_gpio_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct w1_gpio_platform_data *pdata = pdev->dev.platform_data;
+
+	if (pdata->enable_external_pullup)
+		pdata->enable_external_pullup(0);
+
+	return 0;
+}
+
+static int w1_gpio_resume(struct platform_device *pdev)
+{
+	struct w1_gpio_platform_data *pdata = pdev->dev.platform_data;
+
+	if (pdata->enable_external_pullup)
+		pdata->enable_external_pullup(1);
+
+	return 0;
+}
+
+#else
+#define w1_gpio_suspend	NULL
+#define w1_gpio_resume	NULL
+#endif
+
 static struct platform_driver w1_gpio_driver = {
 	.driver = {
 		.name	= "w1-gpio",
 		.owner	= THIS_MODULE,
 	},
 	.remove	= __exit_p(w1_gpio_remove),
+	.suspend = w1_gpio_suspend,
+	.resume = w1_gpio_resume,
 };
 
 static int __init w1_gpio_init(void)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index b166f2852a6..b1ccc04f3c9 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -240,6 +240,32 @@ config ORION_WATCHDOG
 	  To compile this driver as a module, choose M here: the
 	  module will be called orion_wdt.
 
+config COH901327_WATCHDOG
+	bool "ST-Ericsson COH 901 327 watchdog"
+	depends on ARCH_U300
+	default y if MACH_U300
+	help
+	  Say Y here to include Watchdog timer support for the
+	  watchdog embedded into the ST-Ericsson U300 series platforms.
+	  This watchdog is used to reset the system and thus cannot be
+	  compiled as a module.
+
+config TWL4030_WATCHDOG
+	tristate "TWL4030 Watchdog"
+	depends on TWL4030_CORE
+	help
+	  Support for TI TWL4030 watchdog.  Say 'Y' here to enable the
+	  watchdog timer support for TWL4030 chips.
+
+config STMP3XXX_WATCHDOG
+	tristate "Freescale STMP3XXX watchdog"
+	depends on ARCH_STMP3XXX
+	help
+	  Say Y here if to include support for the watchdog timer
+	  for the Sigmatel STMP37XX/378X SoC.
+	  To compile this driver as a module, choose M here: the
+	  module will be called stmp3xxx_wdt.
+
 # AVR32 Architecture
 
 config AT32AP700X_WDT
@@ -703,6 +729,12 @@ config SBC_EPX_C3_WATCHDOG
 
 # MIPS Architecture
 
+config BCM47XX_WDT
+	tristate "Broadcom BCM47xx Watchdog Timer"
+	depends on BCM47XX
+	help
+	  Hardware driver for the Broadcom BCM47xx Watchog Timer.
+
 config RC32434_WDT
 	tristate "IDT RC32434 SoC Watchdog Timer"
 	depends on MIKROTIK_RB532
@@ -729,6 +761,15 @@ config WDT_MTX1
 	  Hardware driver for the MTX-1 boards. This is a watchdog timer that
 	  will reboot the machine after a 100 seconds timer expired.
 
+config PNX833X_WDT
+	tristate "PNX833x Hardware Watchdog"
+	depends on SOC_PNX8335
+	help
+	  Hardware driver for the PNX833x's watchdog. This is a
+	  watchdog timer that will reboot the machine after a programable
+	  timer has expired and no process has written to /dev/watchdog during
+	  that time.
+
 config WDT_RM9K_GPI
 	tristate "RM9000/GPI hardware watchdog"
 	depends on CPU_RM9000
@@ -966,24 +1007,16 @@ config WDTPCI
 	---help---
 	  If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N.
 
-	  To compile this driver as a module, choose M here: the
-	  module will be called wdt_pci.
-
-config WDT_501_PCI
-	bool "PCI-WDT501 features"
-	depends on WDTPCI
-	help
-	  Saying Y here and creating a character special file /dev/temperature
-	  with major number 10 and minor number 131 ("man mknod") will give
-	  you a thermometer inside your computer: reading from
-	  /dev/temperature yields one byte, the temperature in degrees
-	  Fahrenheit. This works only if you have a PCI-WDT501 watchdog board
-	  installed.
+	  If you have a PCI-WDT501 watchdog board then you can enable the
+	  temperature sensor by setting the type parameter to 501.
 
 	  If you want to enable the Fan Tachometer on the PCI-WDT501, then you
 	  can do this via the tachometer parameter. Only do this if you have a
 	  fan tachometer actually set up.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called wdt_pci.
+
 #
 # USB-based Watchdog Cards
 #
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index c3afa14d5be..3d774294a2b 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o
 obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o
 obj-$(CONFIG_AT91SAM9X_WATCHDOG) += at91sam9_wdt.o
 obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
+obj-$(CONFIG_TWL4030_WATCHDOG) += twl4030_wdt.o
 obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
 obj-$(CONFIG_977_WATCHDOG) += wdt977.o
 obj-$(CONFIG_IXP2000_WATCHDOG) += ixp2000_wdt.o
@@ -41,6 +42,8 @@ obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
 obj-$(CONFIG_IOP_WATCHDOG) += iop_wdt.o
 obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o
 obj-$(CONFIG_ORION_WATCHDOG) += orion_wdt.o
+obj-$(CONFIG_COH901327_WATCHDOG) += coh901327_wdt.o
+obj-$(CONFIG_STMP3XXX_WATCHDOG) += stmp3xxx_wdt.o
 
 # AVR32 Architecture
 obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
@@ -98,9 +101,11 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc_epx_c3.o
 # M68KNOMMU Architecture
 
 # MIPS Architecture
+obj-$(CONFIG_BCM47XX_WDT) += bcm47xx_wdt.o
 obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o
 obj-$(CONFIG_INDYDOG) += indydog.o
 obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
+obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
 obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
 obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
 obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
diff --git a/drivers/watchdog/alim7101_wdt.c b/drivers/watchdog/alim7101_wdt.c
index 90f98df5f10..f90afdb1b25 100644
--- a/drivers/watchdog/alim7101_wdt.c
+++ b/drivers/watchdog/alim7101_wdt.c
@@ -322,7 +322,8 @@ static int wdt_notify_sys(struct notifier_block *this,
 		 * watchdog on reboot with no heartbeat
 		 */
 		wdt_change(WDT_ENABLE);
-		printk(KERN_INFO PFX "Watchdog timer is now enabled with no heartbeat - should reboot in ~1 second.\n");
+		printk(KERN_INFO PFX "Watchdog timer is now enabled "
+			"with no heartbeat - should reboot in ~1 second.\n");
 	}
 	return NOTIFY_DONE;
 }
@@ -374,12 +375,17 @@ static int __init alim7101_wdt_init(void)
 	pci_dev_put(ali1543_south);
 	if ((tmp & 0x1e) == 0x00) {
 		if (!use_gpio) {
-			printk(KERN_INFO PFX "Detected old alim7101 revision 'a1d'.  If this is a cobalt board, set the 'use_gpio' module parameter.\n");
+			printk(KERN_INFO PFX
+				"Detected old alim7101 revision 'a1d'.  "
+				"If this is a cobalt board, set the 'use_gpio' "
+				"module parameter.\n");
 			goto err_out;
 		}
 		nowayout = 1;
 	} else if ((tmp & 0x1e) != 0x12 && (tmp & 0x1e) != 0x00) {
-		printk(KERN_INFO PFX "ALi 1543 South-Bridge does not have the correct revision number (???1001?) - WDT not set\n");
+		printk(KERN_INFO PFX
+			"ALi 1543 South-Bridge does not have the correct "
+			"revision number (???1001?) - WDT not set\n");
 		goto err_out;
 	}
 
@@ -409,7 +415,8 @@ static int __init alim7101_wdt_init(void)
 	if (nowayout)
 		__module_get(THIS_MODULE);
 
-	printk(KERN_INFO PFX "WDT driver for ALi M7101 initialised. timeout=%d sec (nowayout=%d)\n",
+	printk(KERN_INFO PFX "WDT driver for ALi M7101 initialised. "
+					"timeout=%d sec (nowayout=%d)\n",
 		timeout, nowayout);
 	return 0;
 
diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c
index 55dcbfe2bb7..3fe9742c23c 100644
--- a/drivers/watchdog/ar7_wdt.c
+++ b/drivers/watchdog/ar7_wdt.c
@@ -246,7 +246,8 @@ static long ar7_wdt_ioctl(struct file *file,
 	static struct watchdog_info ident = {
 		.identity = LONGNAME,
 		.firmware_version = 1,
-		.options = (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING),
+		.options = (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+						WDIOF_MAGICCLOSE),
 	};
 	int new_margin;
 
diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
index 29e52c237a3..b185dafe149 100644
--- a/drivers/watchdog/at91rm9200_wdt.c
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -268,7 +268,8 @@ static int __init at91_wdt_init(void)
 	   if not reset to the default */
 	if (at91_wdt_settimeout(wdt_time)) {
 		at91_wdt_settimeout(WDT_DEFAULT_TIME);
-		pr_info("at91_wdt: wdt_time value must be 1 <= wdt_time <= 256, using %d\n", wdt_time);
+		pr_info("at91_wdt: wdt_time value must be 1 <= wdt_time <= 256"
+						", using %d\n", wdt_time);
 	}
 
 	return platform_driver_register(&at91wdt_driver);
diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c
index 435b0573fb0..eac26021e8d 100644
--- a/drivers/watchdog/at91sam9_wdt.c
+++ b/drivers/watchdog/at91sam9_wdt.c
@@ -156,7 +156,8 @@ static int at91_wdt_settimeout(unsigned int timeout)
 
 static const struct watchdog_info at91_wdt_info = {
 	.identity	= DRV_NAME,
-	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+						WDIOF_MAGICCLOSE,
 };
 
 /*
diff --git a/drivers/watchdog/bcm47xx_wdt.c b/drivers/watchdog/bcm47xx_wdt.c
new file mode 100644
index 00000000000..5c7011cda6a
--- /dev/null
+++ b/drivers/watchdog/bcm47xx_wdt.c
@@ -0,0 +1,286 @@
+/*
+ *  Watchdog driver for Broadcom BCM47XX
+ *
+ *  Copyright (C) 2008 Aleksandar Radovanovic <biblbroks@sezampro.rs>
+ *  Copyright (C) 2009 Matthieu CASTET <castet.matthieu@free.fr>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/reboot.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+#include <linux/watchdog.h>
+#include <linux/timer.h>
+#include <linux/jiffies.h>
+#include <linux/ssb/ssb_embedded.h>
+#include <asm/mach-bcm47xx/bcm47xx.h>
+
+#define DRV_NAME		"bcm47xx_wdt"
+
+#define WDT_DEFAULT_TIME	30	/* seconds */
+#define WDT_MAX_TIME		255	/* seconds */
+
+static int wdt_time = WDT_DEFAULT_TIME;
+static int nowayout = WATCHDOG_NOWAYOUT;
+
+module_param(wdt_time, int, 0);
+MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="
+				__MODULE_STRING(WDT_DEFAULT_TIME) ")");
+
+#ifdef CONFIG_WATCHDOG_NOWAYOUT
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+#endif
+
+static unsigned long bcm47xx_wdt_busy;
+static char expect_release;
+static struct timer_list wdt_timer;
+static atomic_t ticks;
+
+static inline void bcm47xx_wdt_hw_start(void)
+{
+	/* this is 2,5s on 100Mhz clock  and 2s on 133 Mhz */
+	ssb_watchdog_timer_set(&ssb_bcm47xx, 0xfffffff);
+}
+
+static inline int bcm47xx_wdt_hw_stop(void)
+{
+	return ssb_watchdog_timer_set(&ssb_bcm47xx, 0);
+}
+
+static void bcm47xx_timer_tick(unsigned long unused)
+{
+	if (!atomic_dec_and_test(&ticks)) {
+		bcm47xx_wdt_hw_start();
+		mod_timer(&wdt_timer, jiffies + HZ);
+	} else {
+		printk(KERN_CRIT DRV_NAME "Watchdog will fire soon!!!\n");
+	}
+}
+
+static inline void bcm47xx_wdt_pet(void)
+{
+	atomic_set(&ticks, wdt_time);
+}
+
+static void bcm47xx_wdt_start(void)
+{
+	bcm47xx_wdt_pet();
+	bcm47xx_timer_tick(0);
+}
+
+static void bcm47xx_wdt_pause(void)
+{
+	del_timer_sync(&wdt_timer);
+	bcm47xx_wdt_hw_stop();
+}
+
+static void bcm47xx_wdt_stop(void)
+{
+	bcm47xx_wdt_pause();
+}
+
+static int bcm47xx_wdt_settimeout(int new_time)
+{
+	if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
+		return -EINVAL;
+
+	wdt_time = new_time;
+	return 0;
+}
+
+static int bcm47xx_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &bcm47xx_wdt_busy))
+		return -EBUSY;
+
+	bcm47xx_wdt_start();
+	return nonseekable_open(inode, file);
+}
+
+static int bcm47xx_wdt_release(struct inode *inode, struct file *file)
+{
+	if (expect_release == 42) {
+		bcm47xx_wdt_stop();
+	} else {
+		printk(KERN_CRIT DRV_NAME
+			": Unexpected close, not stopping watchdog!\n");
+		bcm47xx_wdt_start();
+	}
+
+	clear_bit(0, &bcm47xx_wdt_busy);
+	expect_release = 0;
+	return 0;
+}
+
+static ssize_t bcm47xx_wdt_write(struct file *file, const char __user *data,
+				size_t len, loff_t *ppos)
+{
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			expect_release = 0;
+
+			for (i = 0; i != len; i++) {
+				char c;
+				if (get_user(c, data + i))
+					return -EFAULT;
+				if (c == 'V')
+					expect_release = 42;
+			}
+		}
+		bcm47xx_wdt_pet();
+	}
+	return len;
+}
+
+static struct watchdog_info bcm47xx_wdt_info = {
+	.identity 	= DRV_NAME,
+	.options 	= WDIOF_SETTIMEOUT |
+				WDIOF_KEEPALIVEPING |
+				WDIOF_MAGICCLOSE,
+};
+
+static long bcm47xx_wdt_ioctl(struct file *file,
+					unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	int new_value, retval = -EINVAL;;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &bcm47xx_wdt_info,
+				sizeof(bcm47xx_wdt_info)) ? -EFAULT : 0;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+
+	case WDIOC_SETOPTIONS:
+		if (get_user(new_value, p))
+			return -EFAULT;
+
+		if (new_value & WDIOS_DISABLECARD) {
+			bcm47xx_wdt_stop();
+			retval = 0;
+		}
+
+		if (new_value & WDIOS_ENABLECARD) {
+			bcm47xx_wdt_start();
+			retval = 0;
+		}
+
+		return retval;
+
+	case WDIOC_KEEPALIVE:
+		bcm47xx_wdt_pet();
+		return 0;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_value, p))
+			return -EFAULT;
+
+		if (bcm47xx_wdt_settimeout(new_value))
+			return -EINVAL;
+
+		bcm47xx_wdt_pet();
+
+	case WDIOC_GETTIMEOUT:
+		return put_user(wdt_time, p);
+
+	default:
+		return -ENOTTY;
+	}
+}
+
+static int bcm47xx_wdt_notify_sys(struct notifier_block *this,
+	unsigned long code, void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		bcm47xx_wdt_stop();
+	return NOTIFY_DONE;
+}
+
+static const struct file_operations bcm47xx_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.unlocked_ioctl	= bcm47xx_wdt_ioctl,
+	.open		= bcm47xx_wdt_open,
+	.release	= bcm47xx_wdt_release,
+	.write		= bcm47xx_wdt_write,
+};
+
+static struct miscdevice bcm47xx_wdt_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &bcm47xx_wdt_fops,
+};
+
+static struct notifier_block bcm47xx_wdt_notifier = {
+	.notifier_call = bcm47xx_wdt_notify_sys,
+};
+
+static int __init bcm47xx_wdt_init(void)
+{
+	int ret;
+
+	if (bcm47xx_wdt_hw_stop() < 0)
+		return -ENODEV;
+
+	setup_timer(&wdt_timer, bcm47xx_timer_tick, 0L);
+
+	if (bcm47xx_wdt_settimeout(wdt_time)) {
+		bcm47xx_wdt_settimeout(WDT_DEFAULT_TIME);
+		printk(KERN_INFO DRV_NAME ": "
+			"wdt_time value must be 0 < wdt_time < %d, using %d\n",
+			(WDT_MAX_TIME + 1), wdt_time);
+	}
+
+	ret = register_reboot_notifier(&bcm47xx_wdt_notifier);
+	if (ret)
+		return ret;
+
+	ret = misc_register(&bcm47xx_wdt_miscdev);
+	if (ret) {
+		unregister_reboot_notifier(&bcm47xx_wdt_notifier);
+		return ret;
+	}
+
+	printk(KERN_INFO "BCM47xx Watchdog Timer enabled (%d seconds%s)\n",
+				wdt_time, nowayout ? ", nowayout" : "");
+	return 0;
+}
+
+static void __exit bcm47xx_wdt_exit(void)
+{
+	if (!nowayout)
+		bcm47xx_wdt_stop();
+
+	misc_deregister(&bcm47xx_wdt_miscdev);
+
+	unregister_reboot_notifier(&bcm47xx_wdt_notifier);
+}
+
+module_init(bcm47xx_wdt_init);
+module_exit(bcm47xx_wdt_exit);
+
+MODULE_AUTHOR("Aleksandar Radovanovic");
+MODULE_DESCRIPTION("Watchdog driver for Broadcom BCM47xx");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c
index 067a57cb3f8..c7b3f9df231 100644
--- a/drivers/watchdog/bfin_wdt.c
+++ b/drivers/watchdog/bfin_wdt.c
@@ -27,10 +27,15 @@
 #include <linux/uaccess.h>
 #include <asm/blackfin.h>
 
-#define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __func__, __LINE__, ## args)
+#define stamp(fmt, args...) \
+	pr_debug("%s:%i: " fmt "\n", __func__, __LINE__, ## args)
 #define stampit() stamp("here i am")
-#define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); })
-#define pr_init(fmt, args...) ({ static const __initconst char __fmt[] = fmt; printk(__fmt, ## args); })
+#define pr_devinit(fmt, args...) \
+	({ static const __devinitconst char __fmt[] = fmt; \
+	printk(__fmt, ## args); })
+#define pr_init(fmt, args...) \
+	({ static const __initconst char __fmt[] = fmt; \
+	printk(__fmt, ## args); })
 
 #define WATCHDOG_NAME "bfin-wdt"
 #define PFX WATCHDOG_NAME ": "
@@ -476,7 +481,8 @@ static int __init bfin_wdt_init(void)
 		return ret;
 	}
 
-	bfin_wdt_device = platform_device_register_simple(WATCHDOG_NAME, -1, NULL, 0);
+	bfin_wdt_device = platform_device_register_simple(WATCHDOG_NAME,
+								-1, NULL, 0);
 	if (IS_ERR(bfin_wdt_device)) {
 		pr_init(KERN_ERR PFX "unable to register device\n");
 		platform_driver_unregister(&bfin_wdt_driver);
diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c
new file mode 100644
index 00000000000..fecb307d28e
--- /dev/null
+++ b/drivers/watchdog/coh901327_wdt.c
@@ -0,0 +1,537 @@
+/*
+ * coh901327_wdt.c
+ *
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Watchdog driver for the ST-Ericsson AB COH 901 327 IP core
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/uaccess.h>
+#include <linux/clk.h>
+
+#define DRV_NAME "WDOG COH 901 327"
+
+/*
+ * COH 901 327 register definitions
+ */
+
+/* WDOG_FEED Register 32bit (-/W) */
+#define U300_WDOG_FR							0x00
+#define U300_WDOG_FR_FEED_RESTART_TIMER					0xFEEDU
+/* WDOG_TIMEOUT Register 32bit (R/W) */
+#define U300_WDOG_TR							0x04
+#define U300_WDOG_TR_TIMEOUT_MASK					0x7FFFU
+/* WDOG_DISABLE1 Register 32bit (-/W) */
+#define U300_WDOG_D1R							0x08
+#define U300_WDOG_D1R_DISABLE1_DISABLE_TIMER				0x2BADU
+/* WDOG_DISABLE2 Register 32bit (R/W) */
+#define U300_WDOG_D2R							0x0C
+#define U300_WDOG_D2R_DISABLE2_DISABLE_TIMER				0xCAFEU
+#define U300_WDOG_D2R_DISABLE_STATUS_DISABLED				0xDABEU
+#define U300_WDOG_D2R_DISABLE_STATUS_ENABLED				0x0000U
+/* WDOG_STATUS Register 32bit (R/W) */
+#define U300_WDOG_SR							0x10
+#define U300_WDOG_SR_STATUS_TIMED_OUT					0xCFE8U
+#define U300_WDOG_SR_STATUS_NORMAL					0x0000U
+#define U300_WDOG_SR_RESET_STATUS_RESET					0xE8B4U
+/* WDOG_COUNT Register 32bit (R/-) */
+#define U300_WDOG_CR							0x14
+#define U300_WDOG_CR_VALID_IND						0x8000U
+#define U300_WDOG_CR_VALID_STABLE					0x0000U
+#define U300_WDOG_CR_COUNT_VALUE_MASK					0x7FFFU
+/* WDOG_JTAGOVR Register 32bit (R/W) */
+#define U300_WDOG_JOR							0x18
+#define U300_WDOG_JOR_JTAG_MODE_IND					0x0002U
+#define U300_WDOG_JOR_JTAG_WATCHDOG_ENABLE				0x0001U
+/* WDOG_RESTART Register 32bit (-/W) */
+#define U300_WDOG_RR							0x1C
+#define U300_WDOG_RR_RESTART_VALUE_RESUME				0xACEDU
+/* WDOG_IRQ_EVENT Register 32bit (R/W) */
+#define U300_WDOG_IER							0x20
+#define U300_WDOG_IER_WILL_BARK_IRQ_EVENT_IND				0x0001U
+#define U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE				0x0001U
+/* WDOG_IRQ_MASK Register 32bit (R/W) */
+#define U300_WDOG_IMR							0x24
+#define U300_WDOG_IMR_WILL_BARK_IRQ_ENABLE				0x0001U
+/* WDOG_IRQ_FORCE Register 32bit (R/W) */
+#define U300_WDOG_IFR							0x28
+#define U300_WDOG_IFR_WILL_BARK_IRQ_FORCE_ENABLE			0x0001U
+
+/* Default timeout in seconds = 1 minute */
+static int margin = 60;
+static resource_size_t phybase;
+static resource_size_t physize;
+static int irq;
+static void __iomem *virtbase;
+static unsigned long coh901327_users;
+static unsigned long boot_status;
+static u16 wdogenablestore;
+static u16 irqmaskstore;
+static struct device *parent;
+
+/*
+ * The watchdog block is of course always clocked, the
+ * clk_enable()/clk_disable() calls are mainly for performing reference
+ * counting higher up in the clock hierarchy.
+ */
+static struct clk *clk;
+
+/*
+ * Enabling and disabling functions.
+ */
+static void coh901327_enable(u16 timeout)
+{
+	u16 val;
+
+	clk_enable(clk);
+	/* Restart timer if it is disabled */
+	val = readw(virtbase + U300_WDOG_D2R);
+	if (val == U300_WDOG_D2R_DISABLE_STATUS_DISABLED)
+		writew(U300_WDOG_RR_RESTART_VALUE_RESUME,
+		       virtbase + U300_WDOG_RR);
+	/* Acknowledge any pending interrupt so it doesn't just fire off */
+	writew(U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE,
+	       virtbase + U300_WDOG_IER);
+	/* Enable the watchdog interrupt */
+	writew(U300_WDOG_IMR_WILL_BARK_IRQ_ENABLE, virtbase + U300_WDOG_IMR);
+	/* Activate the watchdog timer */
+	writew(timeout, virtbase + U300_WDOG_TR);
+	/* Start the watchdog timer */
+	writew(U300_WDOG_FR_FEED_RESTART_TIMER, virtbase + U300_WDOG_FR);
+	/*
+	 * Extra read so that this change propagate in the watchdog.
+	 */
+	(void) readw(virtbase + U300_WDOG_CR);
+	val = readw(virtbase + U300_WDOG_D2R);
+	clk_disable(clk);
+	if (val != U300_WDOG_D2R_DISABLE_STATUS_ENABLED)
+		dev_err(parent,
+			"%s(): watchdog not enabled! D2R value %04x\n",
+			__func__, val);
+}
+
+static void coh901327_disable(void)
+{
+	u16 val;
+
+	clk_enable(clk);
+	/* Disable the watchdog interrupt if it is active */
+	writew(0x0000U, virtbase + U300_WDOG_IMR);
+	/* If the watchdog is currently enabled, attempt to disable it */
+	val = readw(virtbase + U300_WDOG_D2R);
+	if (val != U300_WDOG_D2R_DISABLE_STATUS_DISABLED) {
+		writew(U300_WDOG_D1R_DISABLE1_DISABLE_TIMER,
+		       virtbase + U300_WDOG_D1R);
+		writew(U300_WDOG_D2R_DISABLE2_DISABLE_TIMER,
+		       virtbase + U300_WDOG_D2R);
+		/* Write this twice (else problems occur) */
+		writew(U300_WDOG_D2R_DISABLE2_DISABLE_TIMER,
+		       virtbase + U300_WDOG_D2R);
+	}
+	val = readw(virtbase + U300_WDOG_D2R);
+	clk_disable(clk);
+	if (val != U300_WDOG_D2R_DISABLE_STATUS_DISABLED)
+		dev_err(parent,
+			"%s(): watchdog not disabled! D2R value %04x\n",
+			__func__, val);
+}
+
+static void coh901327_start(void)
+{
+	coh901327_enable(margin * 100);
+}
+
+static void coh901327_keepalive(void)
+{
+	clk_enable(clk);
+	/* Feed the watchdog */
+	writew(U300_WDOG_FR_FEED_RESTART_TIMER,
+	       virtbase + U300_WDOG_FR);
+	clk_disable(clk);
+}
+
+static int coh901327_settimeout(int time)
+{
+	/*
+	 * Max margin is 327 since the 10ms
+	 * timeout register is max
+	 * 0x7FFF = 327670ms ~= 327s.
+	 */
+	if (time <= 0 || time > 327)
+		return -EINVAL;
+
+	margin = time;
+	clk_enable(clk);
+	/* Set new timeout value */
+	writew(margin * 100, virtbase + U300_WDOG_TR);
+	/* Feed the dog */
+	writew(U300_WDOG_FR_FEED_RESTART_TIMER,
+	       virtbase + U300_WDOG_FR);
+	clk_disable(clk);
+	return 0;
+}
+
+/*
+ * This interrupt occurs 10 ms before the watchdog WILL bark.
+ */
+static irqreturn_t coh901327_interrupt(int irq, void *data)
+{
+	u16 val;
+
+	/*
+	 * Ack IRQ? If this occurs we're FUBAR anyway, so
+	 * just acknowledge, disable the interrupt and await the imminent end.
+	 * If you at some point need a host of callbacks to be called
+	 * when the system is about to watchdog-reset, add them here!
+	 *
+	 * NOTE: on future versions of this IP-block, it will be possible
+	 * to prevent a watchdog reset by feeding the watchdog at this
+	 * point.
+	 */
+	clk_enable(clk);
+	val = readw(virtbase + U300_WDOG_IER);
+	if (val == U300_WDOG_IER_WILL_BARK_IRQ_EVENT_IND)
+		writew(U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE,
+		       virtbase + U300_WDOG_IER);
+	writew(0x0000U, virtbase + U300_WDOG_IMR);
+	clk_disable(clk);
+	dev_crit(parent, "watchdog is barking!\n");
+	return IRQ_HANDLED;
+}
+
+/*
+ * Allow only one user (daemon) to open the watchdog
+ */
+static int coh901327_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(1, &coh901327_users))
+		return -EBUSY;
+	coh901327_start();
+	return nonseekable_open(inode, file);
+}
+
+static int coh901327_release(struct inode *inode, struct file *file)
+{
+	clear_bit(1, &coh901327_users);
+	coh901327_disable();
+	return 0;
+}
+
+static ssize_t coh901327_write(struct file *file, const char __user *data,
+			       size_t len, loff_t *ppos)
+{
+	if (len)
+		coh901327_keepalive();
+	return len;
+}
+
+static long coh901327_ioctl(struct file *file, unsigned int cmd,
+			    unsigned long arg)
+{
+	int ret = -ENOTTY;
+	u16 val;
+	int time;
+	int new_options;
+	union {
+		struct watchdog_info __user *ident;
+		int __user *i;
+	} uarg;
+	static struct watchdog_info ident = {
+		.options		= WDIOF_CARDRESET |
+					  WDIOF_SETTIMEOUT |
+					  WDIOF_KEEPALIVEPING,
+		.identity		= "COH 901 327 Watchdog",
+		.firmware_version	= 1,
+	};
+	uarg.i = (int __user *)arg;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		ret = copy_to_user(uarg.ident, &ident,
+				   sizeof(ident)) ? -EFAULT : 0;
+		break;
+
+	case WDIOC_GETSTATUS:
+		ret = put_user(0, uarg.i);
+		break;
+
+	case WDIOC_GETBOOTSTATUS:
+		ret = put_user(boot_status, uarg.i);
+		break;
+
+	case WDIOC_SETOPTIONS:
+		ret = get_user(new_options, uarg.i);
+		if (ret)
+			break;
+		if (new_options & WDIOS_DISABLECARD)
+			coh901327_disable();
+		if (new_options & WDIOS_ENABLECARD)
+			coh901327_start();
+		ret = 0;
+		break;
+
+	case WDIOC_KEEPALIVE:
+		coh901327_keepalive();
+		ret = 0;
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		ret = get_user(time, uarg.i);
+		if (ret)
+			break;
+
+		ret = coh901327_settimeout(time);
+		if (ret)
+			break;
+		/* Then fall through to return set value */
+
+	case WDIOC_GETTIMEOUT:
+		ret = put_user(margin, uarg.i);
+		break;
+
+	case WDIOC_GETTIMELEFT:
+		clk_enable(clk);
+		/* Read repeatedly until the value is stable! */
+		val = readw(virtbase + U300_WDOG_CR);
+		while (val & U300_WDOG_CR_VALID_IND)
+			val = readw(virtbase + U300_WDOG_CR);
+		val &= U300_WDOG_CR_COUNT_VALUE_MASK;
+		clk_disable(clk);
+		if (val != 0)
+			val /= 100;
+		ret = put_user(val, uarg.i);
+		break;
+	}
+	return ret;
+}
+
+static const struct file_operations coh901327_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= coh901327_write,
+	.unlocked_ioctl	= coh901327_ioctl,
+	.open		= coh901327_open,
+	.release	= coh901327_release,
+};
+
+static struct miscdevice coh901327_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &coh901327_fops,
+};
+
+static int __exit coh901327_remove(struct platform_device *pdev)
+{
+	misc_deregister(&coh901327_miscdev);
+	coh901327_disable();
+	free_irq(irq, pdev);
+	clk_put(clk);
+	iounmap(virtbase);
+	release_mem_region(phybase, physize);
+	return 0;
+}
+
+
+static int __init coh901327_probe(struct platform_device *pdev)
+{
+	int ret;
+	u16 val;
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENOENT;
+
+	parent = &pdev->dev;
+	physize = resource_size(res);
+	phybase = res->start;
+
+	if (request_mem_region(phybase, physize, DRV_NAME) == NULL) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	virtbase = ioremap(phybase, physize);
+	if (!virtbase) {
+		ret = -ENOMEM;
+		goto out_no_remap;
+	}
+
+	clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		dev_err(&pdev->dev, "could not get clock\n");
+		goto out_no_clk;
+	}
+	ret = clk_enable(clk);
+	if (ret) {
+		dev_err(&pdev->dev, "could not enable clock\n");
+		goto out_no_clk_enable;
+	}
+
+	val = readw(virtbase + U300_WDOG_SR);
+	switch (val) {
+	case U300_WDOG_SR_STATUS_TIMED_OUT:
+		dev_info(&pdev->dev,
+			"watchdog timed out since last chip reset!\n");
+		boot_status = WDIOF_CARDRESET;
+		/* Status will be cleared below */
+		break;
+	case U300_WDOG_SR_STATUS_NORMAL:
+		dev_info(&pdev->dev,
+			"in normal status, no timeouts have occurred.\n");
+		break;
+	default:
+		dev_info(&pdev->dev,
+			"contains an illegal status code (%08x)\n", val);
+		break;
+	}
+
+	val = readw(virtbase + U300_WDOG_D2R);
+	switch (val) {
+	case U300_WDOG_D2R_DISABLE_STATUS_DISABLED:
+		dev_info(&pdev->dev, "currently disabled.\n");
+		break;
+	case U300_WDOG_D2R_DISABLE_STATUS_ENABLED:
+		dev_info(&pdev->dev,
+			 "currently enabled! (disabling it now)\n");
+		coh901327_disable();
+		break;
+	default:
+		dev_err(&pdev->dev,
+			"contains an illegal enable/disable code (%08x)\n",
+			val);
+		break;
+	}
+
+	/* Reset the watchdog */
+	writew(U300_WDOG_SR_RESET_STATUS_RESET, virtbase + U300_WDOG_SR);
+
+	irq = platform_get_irq(pdev, 0);
+	if (request_irq(irq, coh901327_interrupt, IRQF_DISABLED,
+			DRV_NAME " Bark", pdev)) {
+		ret = -EIO;
+		goto out_no_irq;
+	}
+
+	clk_disable(clk);
+
+	ret = misc_register(&coh901327_miscdev);
+	if (ret == 0)
+		dev_info(&pdev->dev,
+			 "initialized. timer margin=%d sec\n", margin);
+	else
+		goto out_no_wdog;
+
+	return 0;
+
+out_no_wdog:
+	free_irq(irq, pdev);
+out_no_irq:
+	clk_disable(clk);
+out_no_clk_enable:
+	clk_put(clk);
+out_no_clk:
+	iounmap(virtbase);
+out_no_remap:
+	release_mem_region(phybase, SZ_4K);
+out:
+	return ret;
+}
+
+#ifdef CONFIG_PM
+static int coh901327_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	irqmaskstore = readw(virtbase + U300_WDOG_IMR) & 0x0001U;
+	wdogenablestore = readw(virtbase + U300_WDOG_D2R);
+	/* If watchdog is on, disable it here and now */
+	if (wdogenablestore == U300_WDOG_D2R_DISABLE_STATUS_ENABLED)
+		coh901327_disable();
+	return 0;
+}
+
+static int coh901327_resume(struct platform_device *pdev)
+{
+	/* Restore the watchdog interrupt */
+	writew(irqmaskstore, virtbase + U300_WDOG_IMR);
+	if (wdogenablestore == U300_WDOG_D2R_DISABLE_STATUS_ENABLED) {
+		/* Restart the watchdog timer */
+		writew(U300_WDOG_RR_RESTART_VALUE_RESUME,
+		       virtbase + U300_WDOG_RR);
+		writew(U300_WDOG_FR_FEED_RESTART_TIMER,
+		       virtbase + U300_WDOG_FR);
+	}
+	return 0;
+}
+#else
+#define coh901327_suspend NULL
+#define coh901327_resume  NULL
+#endif
+
+/*
+ * Mistreating the watchdog is the only way to perform a software reset of the
+ * system on EMP platforms. So we implement this and export a symbol for it.
+ */
+void coh901327_watchdog_reset(void)
+{
+	/* Enable even if on JTAG too */
+	writew(U300_WDOG_JOR_JTAG_WATCHDOG_ENABLE,
+	       virtbase + U300_WDOG_JOR);
+	/*
+	 * Timeout = 5s, we have to wait for the watchdog reset to
+	 * actually take place: the watchdog will be reloaded with the
+	 * default value immediately, so we HAVE to reboot and get back
+	 * into the kernel in 30s, or the device will reboot again!
+	 * The boot loader will typically deactivate the watchdog, so we
+	 * need time enough for the boot loader to get to the point of
+	 * deactivating the watchdog before it is shut down by it.
+	 *
+	 * NOTE: on future versions of the watchdog, this restriction is
+	 * gone: the watchdog will be reloaded with a defaul value (1 min)
+	 * instead of last value, and you can conveniently set the watchdog
+	 * timeout to 10ms (value = 1) without any problems.
+	 */
+	coh901327_enable(500);
+	/* Return and await doom */
+}
+
+static struct platform_driver coh901327_driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= "coh901327_wdog",
+	},
+	.remove		= __exit_p(coh901327_remove),
+	.suspend	= coh901327_suspend,
+	.resume		= coh901327_resume,
+};
+
+static int __init coh901327_init(void)
+{
+	return platform_driver_probe(&coh901327_driver, coh901327_probe);
+}
+module_init(coh901327_init);
+
+static void __exit coh901327_exit(void)
+{
+	platform_driver_unregister(&coh901327_driver);
+}
+module_exit(coh901327_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("COH 901 327 Watchdog");
+
+module_param(margin, int, 0);
+MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)");
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/cpwd.c b/drivers/watchdog/cpwd.c
index 41070e4771a..081f2955419 100644
--- a/drivers/watchdog/cpwd.c
+++ b/drivers/watchdog/cpwd.c
@@ -154,9 +154,9 @@ static struct cpwd *cpwd_device;
 
 static struct timer_list cpwd_timer;
 
-static int wd0_timeout = 0;
-static int wd1_timeout = 0;
-static int wd2_timeout = 0;
+static int wd0_timeout;
+static int wd1_timeout;
+static int wd2_timeout;
 
 module_param(wd0_timeout, int, 0);
 MODULE_PARM_DESC(wd0_timeout, "Default watchdog0 timeout in 1/10secs");
diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c
index c51d0b0ea0c..83e22e7ea4a 100644
--- a/drivers/watchdog/davinci_wdt.c
+++ b/drivers/watchdog/davinci_wdt.c
@@ -193,7 +193,7 @@ static struct miscdevice davinci_wdt_miscdev = {
 	.fops = &davinci_wdt_fops,
 };
 
-static int davinci_wdt_probe(struct platform_device *pdev)
+static int __devinit davinci_wdt_probe(struct platform_device *pdev)
 {
 	int ret = 0, size;
 	struct resource *res;
@@ -237,7 +237,7 @@ static int davinci_wdt_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int davinci_wdt_remove(struct platform_device *pdev)
+static int __devexit davinci_wdt_remove(struct platform_device *pdev)
 {
 	misc_deregister(&davinci_wdt_miscdev);
 	if (wdt_mem) {
@@ -254,7 +254,7 @@ static struct platform_driver platform_wdt_driver = {
 		.owner	= THIS_MODULE,
 	},
 	.probe = davinci_wdt_probe,
-	.remove = davinci_wdt_remove,
+	.remove = __devexit_p(davinci_wdt_remove),
 };
 
 static int __init davinci_wdt_init(void)
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index 3137361ccbf..a6c5674c78e 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -19,6 +19,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/nmi.h>
 #include <linux/kernel.h>
 #include <linux/miscdevice.h>
 #include <linux/mm.h>
@@ -47,7 +48,7 @@
 #define PCI_BIOS32_PARAGRAPH_LEN	16
 #define PCI_ROM_BASE1			0x000F0000
 #define ROM_SIZE			0x10000
-#define HPWDT_VERSION			"1.01"
+#define HPWDT_VERSION			"1.1.1"
 
 struct bios32_service_dir {
 	u32 signature;
@@ -119,6 +120,8 @@ static int nowayout = WATCHDOG_NOWAYOUT;
 static char expect_release;
 static unsigned long hpwdt_is_open;
 static unsigned int allow_kdump;
+static unsigned int hpwdt_nmi_sourcing;
+static unsigned int priority;		/* hpwdt at end of die_notify list */
 
 static void __iomem *pci_mem_addr;		/* the PCI-memory address */
 static unsigned long __iomem *hpwdt_timer_reg;
@@ -468,21 +471,22 @@ static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason,
 	if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI)
 		return NOTIFY_OK;
 
-	spin_lock_irqsave(&rom_lock, rom_pl);
-	if (!die_nmi_called)
-		asminline_call(&cmn_regs, cru_rom_addr);
-	die_nmi_called = 1;
-	spin_unlock_irqrestore(&rom_lock, rom_pl);
-	if (cmn_regs.u1.ral == 0) {
-		printk(KERN_WARNING "hpwdt: An NMI occurred, "
-			"but unable to determine source.\n");
-	} else {
-		if (allow_kdump)
-			hpwdt_stop();
-		panic("An NMI occurred, please see the Integrated "
-			"Management Log for details.\n");
+	if (hpwdt_nmi_sourcing) {
+		spin_lock_irqsave(&rom_lock, rom_pl);
+		if (!die_nmi_called)
+			asminline_call(&cmn_regs, cru_rom_addr);
+		die_nmi_called = 1;
+		spin_unlock_irqrestore(&rom_lock, rom_pl);
+		if (cmn_regs.u1.ral == 0) {
+			printk(KERN_WARNING "hpwdt: An NMI occurred, "
+				"but unable to determine source.\n");
+		} else {
+			if (allow_kdump)
+				hpwdt_stop();
+			panic("An NMI occurred, please see the Integrated "
+				"Management Log for details.\n");
+		}
 	}
-
 	return NOTIFY_OK;
 }
 
@@ -620,19 +624,46 @@ static struct miscdevice hpwdt_miscdev = {
 
 static struct notifier_block die_notifier = {
 	.notifier_call = hpwdt_pretimeout,
-	.priority = 0x7FFFFFFF,
+	.priority = 0,
 };
 
 /*
  *	Init & Exit
  */
 
+#ifdef ARCH_HAS_NMI_WATCHDOG
+static void __devinit hpwdt_check_nmi_sourcing(struct pci_dev *dev)
+{
+	/*
+	 * If nmi_watchdog is turned off then we can turn on
+	 * our nmi sourcing capability.
+	 */
+	if (!nmi_watchdog_active())
+		hpwdt_nmi_sourcing = 1;
+	else
+		dev_warn(&dev->dev, "NMI sourcing is disabled. To enable this "
+			"functionality you must reboot with nmi_watchdog=0 "
+			"and load the hpwdt driver with priority=1.\n");
+}
+#else
+static void __devinit hpwdt_check_nmi_sourcing(struct pci_dev *dev)
+{
+	dev_warn(&dev->dev, "NMI sourcing is disabled. "
+		"Your kernel does not support a NMI Watchdog.\n");
+}
+#endif
+
 static int __devinit hpwdt_init_one(struct pci_dev *dev,
 					const struct pci_device_id *ent)
 {
 	int retval;
 
 	/*
+	 * Check if we can do NMI sourcing or not
+	 */
+	hpwdt_check_nmi_sourcing(dev);
+
+	/*
 	 * First let's find out if we are on an iLO2 server. We will
 	 * not run on a legacy ASM box.
 	 * So we only support the G5 ProLiant servers and higher.
@@ -685,6 +716,14 @@ static int __devinit hpwdt_init_one(struct pci_dev *dev,
 	cmn_regs.u1.rah = 0x0D;
 	cmn_regs.u1.ral = 0x02;
 
+	/*
+	 * If the priority is set to 1, then we will be put first on the
+	 * die notify list to handle a critical NMI. The default is to
+	 * be last so other users of the NMI signal can function.
+	 */
+	if (priority)
+		die_notifier.priority = 0x7FFFFFFF;
+
 	retval = register_die_notifier(&die_notifier);
 	if (retval != 0) {
 		dev_warn(&dev->dev,
@@ -704,9 +743,11 @@ static int __devinit hpwdt_init_one(struct pci_dev *dev,
 	printk(KERN_INFO
 		"hp Watchdog Timer Driver: %s"
 		", timer margin: %d seconds (nowayout=%d)"
-		", allow kernel dump: %s (default = 0/OFF).\n",
+		", allow kernel dump: %s (default = 0/OFF)"
+		", priority: %s (default = 0/LAST).\n",
 		HPWDT_VERSION, soft_margin, nowayout,
-		(allow_kdump == 0) ? "OFF" : "ON");
+		(allow_kdump == 0) ? "OFF" : "ON",
+		(priority == 0) ? "LAST" : "FIRST");
 
 	return 0;
 
@@ -769,5 +810,9 @@ module_param(nowayout, int, 0);
 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
 		__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
+module_param(priority, int, 0);
+MODULE_PARM_DESC(priority, "The hpwdt driver handles NMIs first or last"
+		" (default = 0/Last)\n");
+
 module_init(hpwdt_init);
 module_exit(hpwdt_cleanup);
diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c
index d3c0f6de552..5133bca5ccb 100644
--- a/drivers/watchdog/iTCO_vendor_support.c
+++ b/drivers/watchdog/iTCO_vendor_support.c
@@ -19,7 +19,7 @@
 
 /* Module and version information */
 #define DRV_NAME	"iTCO_vendor_support"
-#define DRV_VERSION	"1.03"
+#define DRV_VERSION	"1.04"
 #define PFX		DRV_NAME ": "
 
 /* Includes */
@@ -35,20 +35,23 @@
 #include "iTCO_vendor.h"
 
 /* iTCO defines */
-#define	SMI_EN		acpibase + 0x30	/* SMI Control and Enable Register */
-#define	TCOBASE		acpibase + 0x60	/* TCO base address */
-#define	TCO1_STS	TCOBASE + 0x04	/* TCO1 Status Register */
+#define	SMI_EN		(acpibase + 0x30) /* SMI Control and Enable Register */
+#define	TCOBASE		(acpibase + 0x60) /* TCO base address */
+#define	TCO1_STS	(TCOBASE + 0x04)  /* TCO1 Status Register */
 
 /* List of vendor support modes */
 /* SuperMicro Pentium 3 Era 370SSE+-OEM1/P3TSSE */
 #define SUPERMICRO_OLD_BOARD	1
 /* SuperMicro Pentium 4 / Xeon 4 / EMT64T Era Systems */
 #define SUPERMICRO_NEW_BOARD	2
+/* Broken BIOS */
+#define BROKEN_BIOS		911
 
 static int vendorsupport;
 module_param(vendorsupport, int, 0);
 MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default="
-			"0 (none), 1=SuperMicro Pent3, 2=SuperMicro Pent4+");
+			"0 (none), 1=SuperMicro Pent3, 2=SuperMicro Pent4+, "
+							"911=Broken SMI BIOS");
 
 /*
  *	Vendor Specific Support
@@ -243,25 +246,92 @@ static void supermicro_new_pre_set_heartbeat(unsigned int heartbeat)
 }
 
 /*
+ *	Vendor Support: 911
+ *	Board: Some Intel ICHx based motherboards
+ *	iTCO chipset: ICH7+
+ *
+ *	Some Intel motherboards have a broken BIOS implementation: i.e.
+ *	the SMI handler clear's the TIMEOUT bit in the TC01_STS register
+ *	and does not reload the time. Thus the TCO watchdog does not reboot
+ *	the system.
+ *
+ *	These are the conclusions of Andriy Gapon <avg@icyb.net.ua> after
+ *	debugging: the SMI handler is quite simple - it tests value in
+ *	TCO1_CNT against 0x800, i.e. checks TCO_TMR_HLT. If the bit is set
+ *	the handler goes into an infinite loop, apparently to allow the
+ *	second timeout and reboot. Otherwise it simply clears TIMEOUT bit
+ *	in TCO1_STS and that's it.
+ *	So the logic seems to be reversed, because it is hard to see how
+ *	TIMEOUT can get set to 1 and SMI generated when TCO_TMR_HLT is set
+ *	(other than a transitional effect).
+ *
+ *	The only fix found to get the motherboard(s) to reboot is to put
+ *	the glb_smi_en bit to 0. This is a dirty hack that bypasses the
+ *	broken code by disabling Global SMI.
+ *
+ *	WARNING: globally disabling SMI could possibly lead to dramatic
+ *	problems, especially on laptops! I.e. various ACPI things where
+ *	SMI is used for communication between OS and firmware.
+ *
+ *	Don't use this fix if you don't need to!!!
+ */
+
+static void broken_bios_start(unsigned long acpibase)
+{
+	unsigned long val32;
+
+	val32 = inl(SMI_EN);
+	/* Bit 13: TCO_EN     -> 0 = Disables TCO logic generating an SMI#
+	   Bit  0: GBL_SMI_EN -> 0 = No SMI# will be generated by ICH. */
+	val32 &= 0xffffdffe;
+	outl(val32, SMI_EN);
+}
+
+static void broken_bios_stop(unsigned long acpibase)
+{
+	unsigned long val32;
+
+	val32 = inl(SMI_EN);
+	/* Bit 13: TCO_EN     -> 1 = Enables TCO logic generating an SMI#
+	   Bit  0: GBL_SMI_EN -> 1 = Turn global SMI on again. */
+	val32 |= 0x00002001;
+	outl(val32, SMI_EN);
+}
+
+/*
  *	Generic Support Functions
  */
 
 void iTCO_vendor_pre_start(unsigned long acpibase,
 			   unsigned int heartbeat)
 {
-	if (vendorsupport == SUPERMICRO_OLD_BOARD)
+	switch (vendorsupport) {
+	case SUPERMICRO_OLD_BOARD:
 		supermicro_old_pre_start(acpibase);
-	else if (vendorsupport == SUPERMICRO_NEW_BOARD)
+		break;
+	case SUPERMICRO_NEW_BOARD:
 		supermicro_new_pre_start(heartbeat);
+		break;
+	case BROKEN_BIOS:
+		broken_bios_start(acpibase);
+		break;
+	}
 }
 EXPORT_SYMBOL(iTCO_vendor_pre_start);
 
 void iTCO_vendor_pre_stop(unsigned long acpibase)
 {
-	if (vendorsupport == SUPERMICRO_OLD_BOARD)
+	switch (vendorsupport) {
+	case SUPERMICRO_OLD_BOARD:
 		supermicro_old_pre_stop(acpibase);
-	else if (vendorsupport == SUPERMICRO_NEW_BOARD)
+		break;
+	case SUPERMICRO_NEW_BOARD:
 		supermicro_new_pre_stop();
+		break;
+	case BROKEN_BIOS:
+		broken_bios_stop(acpibase);
+		break;
+	}
 }
 EXPORT_SYMBOL(iTCO_vendor_pre_stop);
 
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index 648250b998c..6a51edde6ea 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -236,19 +236,19 @@ MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl);
 
 /* Address definitions for the TCO */
 /* TCO base address */
-#define TCOBASE		iTCO_wdt_private.ACPIBASE + 0x60
+#define TCOBASE		(iTCO_wdt_private.ACPIBASE + 0x60)
 /* SMI Control and Enable Register */
-#define SMI_EN		iTCO_wdt_private.ACPIBASE + 0x30
-
-#define TCO_RLD		TCOBASE + 0x00	/* TCO Timer Reload and Curr. Value */
-#define TCOv1_TMR	TCOBASE + 0x01	/* TCOv1 Timer Initial Value	*/
-#define TCO_DAT_IN	TCOBASE + 0x02	/* TCO Data In Register		*/
-#define TCO_DAT_OUT	TCOBASE + 0x03	/* TCO Data Out Register	*/
-#define TCO1_STS	TCOBASE + 0x04	/* TCO1 Status Register		*/
-#define TCO2_STS	TCOBASE + 0x06	/* TCO2 Status Register		*/
-#define TCO1_CNT	TCOBASE + 0x08	/* TCO1 Control Register	*/
-#define TCO2_CNT	TCOBASE + 0x0a	/* TCO2 Control Register	*/
-#define TCOv2_TMR	TCOBASE + 0x12	/* TCOv2 Timer Initial Value	*/
+#define SMI_EN		(iTCO_wdt_private.ACPIBASE + 0x30)
+
+#define TCO_RLD		(TCOBASE + 0x00) /* TCO Timer Reload and Curr. Value */
+#define TCOv1_TMR	(TCOBASE + 0x01) /* TCOv1 Timer Initial Value	*/
+#define TCO_DAT_IN	(TCOBASE + 0x02) /* TCO Data In Register	*/
+#define TCO_DAT_OUT	(TCOBASE + 0x03) /* TCO Data Out Register	*/
+#define TCO1_STS	(TCOBASE + 0x04) /* TCO1 Status Register	*/
+#define TCO2_STS	(TCOBASE + 0x06) /* TCO2 Status Register	*/
+#define TCO1_CNT	(TCOBASE + 0x08) /* TCO1 Control Register	*/
+#define TCO2_CNT	(TCOBASE + 0x0a) /* TCO2 Control Register	*/
+#define TCOv2_TMR	(TCOBASE + 0x12) /* TCOv2 Timer Initial Value	*/
 
 /* internal variables */
 static unsigned long is_active;
@@ -666,6 +666,11 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
 	   GCS = RCBA + ICH6_GCS(0x3410). */
 	if (iTCO_wdt_private.iTCO_version == 2) {
 		pci_read_config_dword(pdev, 0xf0, &base_address);
+		if ((base_address & 1) == 0) {
+			printk(KERN_ERR PFX "RCBA is disabled by harddware\n");
+			ret = -ENODEV;
+			goto out;
+		}
 		RCBA = base_address & 0xffffc000;
 		iTCO_wdt_private.gcs = ioremap((RCBA + 0x3410), 4);
 	}
@@ -675,7 +680,7 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
 		printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, "
 					"reboot disabled by hardware\n");
 		ret = -ENODEV;	/* Cannot reset NO_REBOOT bit */
-		goto out;
+		goto out_unmap;
 	}
 
 	/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
@@ -686,7 +691,7 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
 		printk(KERN_ERR PFX
 			"I/O address 0x%04lx already in use\n", SMI_EN);
 		ret = -EIO;
-		goto out;
+		goto out_unmap;
 	}
 	/* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
 	val32 = inl(SMI_EN);
@@ -742,9 +747,10 @@ unreg_region:
 	release_region(TCOBASE, 0x20);
 unreg_smi_en:
 	release_region(SMI_EN, 4);
-out:
+out_unmap:
 	if (iTCO_wdt_private.iTCO_version == 2)
 		iounmap(iTCO_wdt_private.gcs);
+out:
 	pci_dev_put(iTCO_wdt_private.pdev);
 	iTCO_wdt_private.ACPIBASE = 0;
 	return ret;
diff --git a/drivers/watchdog/indydog.c b/drivers/watchdog/indydog.c
index 0f761db9a27..bea8a124a55 100644
--- a/drivers/watchdog/indydog.c
+++ b/drivers/watchdog/indydog.c
@@ -83,7 +83,6 @@ static int indydog_open(struct inode *inode, struct file *file)
 	indydog_start();
 	indydog_ping();
 
-	indydog_alive = 1;
 	printk(KERN_INFO "Started watchdog timer.\n");
 
 	return nonseekable_open(inode, file);
@@ -113,8 +112,7 @@ static long indydog_ioctl(struct file *file, unsigned int cmd,
 {
 	int options, retval = -EINVAL;
 	static struct watchdog_info ident = {
-		.options		= WDIOF_KEEPALIVEPING |
-					  WDIOF_MAGICCLOSE,
+		.options		= WDIOF_KEEPALIVEPING,
 		.firmware_version	= 0,
 		.identity		= "Hardware Watchdog for SGI IP22",
 	};
diff --git a/drivers/watchdog/it8712f_wdt.c b/drivers/watchdog/it8712f_wdt.c
index 2270ee07c01..daed48ded7f 100644
--- a/drivers/watchdog/it8712f_wdt.c
+++ b/drivers/watchdog/it8712f_wdt.c
@@ -239,7 +239,8 @@ static long it8712f_wdt_ioctl(struct file *file, unsigned int cmd,
 	static struct watchdog_info ident = {
 		.identity = "IT8712F Watchdog",
 		.firmware_version = 1,
-		.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+		.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+						WDIOF_MAGICCLOSE,
 	};
 	int value;
 
diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c
index ae3832110ac..00b03eb43bf 100644
--- a/drivers/watchdog/ks8695_wdt.c
+++ b/drivers/watchdog/ks8695_wdt.c
@@ -293,8 +293,8 @@ static int __init ks8695_wdt_init(void)
 	   if not reset to the default */
 	if (ks8695_wdt_settimeout(wdt_time)) {
 		ks8695_wdt_settimeout(WDT_DEFAULT_TIME);
-		pr_info("ks8695_wdt: wdt_time value must be 1 <= wdt_time <= %i, using %d\n",
-							wdt_time, WDT_MAX_TIME);
+		pr_info("ks8695_wdt: wdt_time value must be 1 <= wdt_time <= %i"
+					", using %d\n", wdt_time, WDT_MAX_TIME);
 	}
 	return platform_driver_register(&ks8695wdt_driver);
 }
diff --git a/drivers/watchdog/machzwd.c b/drivers/watchdog/machzwd.c
index 2dfc27559bf..b6b3f59ab44 100644
--- a/drivers/watchdog/machzwd.c
+++ b/drivers/watchdog/machzwd.c
@@ -118,7 +118,8 @@ static struct watchdog_info zf_info = {
  */
 static int action;
 module_param(action, int, 0);
-MODULE_PARM_DESC(action, "after watchdog resets, generate: 0 = RESET(*)  1 = SMI  2 = NMI  3 = SCI");
+MODULE_PARM_DESC(action, "after watchdog resets, generate: "
+				"0 = RESET(*)  1 = SMI  2 = NMI  3 = SCI");
 
 static void zf_ping(unsigned long data);
 
@@ -142,7 +143,8 @@ static unsigned long next_heartbeat;
 #ifndef ZF_DEBUG
 #	define dprintk(format, args...)
 #else
-#	define dprintk(format, args...) printk(KERN_DEBUG PFX ":%s:%d: " format, __func__, __LINE__ , ## args)
+#	define dprintk(format, args...) printk(KERN_DEBUG PFX
+				":%s:%d: " format, __func__, __LINE__ , ## args)
 #endif
 
 
@@ -340,7 +342,8 @@ static int zf_close(struct inode *inode, struct file *file)
 		zf_timer_off();
 	else {
 		del_timer(&zf_timer);
-		printk(KERN_ERR PFX ": device file closed unexpectedly. Will not stop the WDT!\n");
+		printk(KERN_ERR PFX ": device file closed unexpectedly. "
+						"Will not stop the WDT!\n");
 	}
 	clear_bit(0, &zf_is_open);
 	zf_expect_close = 0;
diff --git a/drivers/watchdog/mpc5200_wdt.c b/drivers/watchdog/mpc5200_wdt.c
index 465fe36adad..fa9c47ce0ae 100644
--- a/drivers/watchdog/mpc5200_wdt.c
+++ b/drivers/watchdog/mpc5200_wdt.c
@@ -188,7 +188,7 @@ static int mpc5200_wdt_probe(struct of_device *op,
 	if (!wdt)
 		return -ENOMEM;
 
-	wdt->ipb_freq = mpc52xx_find_ipb_freq(op->node);
+	wdt->ipb_freq = mpc5xxx_get_bus_frequency(op->node);
 
 	err = of_address_to_resource(op->node, 0, &wdt->mem);
 	if (err)
diff --git a/drivers/watchdog/mpcore_wdt.c b/drivers/watchdog/mpcore_wdt.c
index 1512ab8b175..83fa34b214b 100644
--- a/drivers/watchdog/mpcore_wdt.c
+++ b/drivers/watchdog/mpcore_wdt.c
@@ -61,7 +61,9 @@ MODULE_PARM_DESC(nowayout,
 #define ONLY_TESTING	0
 static int mpcore_noboot = ONLY_TESTING;
 module_param(mpcore_noboot, int, 0);
-MODULE_PARM_DESC(mpcore_noboot, "MPcore watchdog action, set to 1 to ignore reboots, 0 to reboot (default=" __MODULE_STRING(ONLY_TESTING) ")");
+MODULE_PARM_DESC(mpcore_noboot, "MPcore watchdog action, "
+	"set to 1 to ignore reboots, 0 to reboot (default="
+					__MODULE_STRING(ONLY_TESTING) ")");
 
 /*
  *	This is the interrupt handler.  Note that we only use this
@@ -416,7 +418,8 @@ static struct platform_driver mpcore_wdt_driver = {
 	},
 };
 
-static char banner[] __initdata = KERN_INFO "MPcore Watchdog Timer: 0.1. mpcore_noboot=%d mpcore_margin=%d sec (nowayout= %d)\n";
+static char banner[] __initdata = KERN_INFO "MPcore Watchdog Timer: 0.1. "
+		"mpcore_noboot=%d mpcore_margin=%d sec (nowayout= %d)\n";
 
 static int __init mpcore_wdt_init(void)
 {
diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c
index 539b6f6ba7f..08e8a6ab74e 100644
--- a/drivers/watchdog/mtx-1_wdt.c
+++ b/drivers/watchdog/mtx-1_wdt.c
@@ -206,7 +206,7 @@ static struct miscdevice mtx1_wdt_misc = {
 };
 
 
-static int mtx1_wdt_probe(struct platform_device *pdev)
+static int __devinit mtx1_wdt_probe(struct platform_device *pdev)
 {
 	int ret;
 
@@ -229,7 +229,7 @@ static int mtx1_wdt_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int mtx1_wdt_remove(struct platform_device *pdev)
+static int __devexit mtx1_wdt_remove(struct platform_device *pdev)
 {
 	/* FIXME: do we need to lock this test ? */
 	if (mtx1_wdt_device.queue) {
@@ -242,7 +242,7 @@ static int mtx1_wdt_remove(struct platform_device *pdev)
 
 static struct platform_driver mtx1_wdt = {
 	.probe = mtx1_wdt_probe,
-	.remove = mtx1_wdt_remove,
+	.remove = __devexit_p(mtx1_wdt_remove),
 	.driver.name = "mtx1-wdt",
 	.driver.owner = THIS_MODULE,
 };
diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
index f2713851aaa..3ed571a2ab1 100644
--- a/drivers/watchdog/omap_wdt.c
+++ b/drivers/watchdog/omap_wdt.c
@@ -159,6 +159,7 @@ static int omap_wdt_open(struct inode *inode, struct file *file)
 	file->private_data = (void *) wdev;
 
 	omap_wdt_set_timeout(wdev);
+	omap_wdt_ping(wdev); /* trigger loading of new timeout value */
 	omap_wdt_enable(wdev);
 
 	return nonseekable_open(inode, file);
@@ -313,6 +314,9 @@ static int __devinit omap_wdt_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, wdev);
 
+	clk_enable(wdev->ick);
+	clk_enable(wdev->fck);
+
 	omap_wdt_disable(wdev);
 	omap_wdt_adjust_timeout(timer_margin);
 
@@ -332,6 +336,9 @@ static int __devinit omap_wdt_probe(struct platform_device *pdev)
 	/* autogate OCP interface clock */
 	__raw_writel(0x01, wdev->base + OMAP_WATCHDOG_SYS_CONFIG);
 
+	clk_disable(wdev->ick);
+	clk_disable(wdev->fck);
+
 	omap_wdt_dev = pdev;
 
 	return 0;
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index 64135195f82..f24d04132ed 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -246,7 +246,7 @@ static struct miscdevice pnx4008_wdt_miscdev = {
 	.fops = &pnx4008_wdt_fops,
 };
 
-static int pnx4008_wdt_probe(struct platform_device *pdev)
+static int __devinit pnx4008_wdt_probe(struct platform_device *pdev)
 {
 	int ret = 0, size;
 	struct resource *res;
@@ -299,7 +299,7 @@ out:
 	return ret;
 }
 
-static int pnx4008_wdt_remove(struct platform_device *pdev)
+static int __devexit pnx4008_wdt_remove(struct platform_device *pdev)
 {
 	misc_deregister(&pnx4008_wdt_miscdev);
 	if (wdt_clk) {
@@ -321,7 +321,7 @@ static struct platform_driver platform_wdt_driver = {
 		.owner	= THIS_MODULE,
 	},
 	.probe = pnx4008_wdt_probe,
-	.remove = pnx4008_wdt_remove,
+	.remove = __devexit_p(pnx4008_wdt_remove),
 };
 
 static int __init pnx4008_wdt_init(void)
diff --git a/drivers/watchdog/pnx833x_wdt.c b/drivers/watchdog/pnx833x_wdt.c
new file mode 100644
index 00000000000..538ec2c0519
--- /dev/null
+++ b/drivers/watchdog/pnx833x_wdt.c
@@ -0,0 +1,282 @@
+/*
+ *  PNX833x Hardware Watchdog Driver
+ *  Copyright 2008 NXP Semiconductors
+ *  Daniel Laird <daniel.j.laird@nxp.com>
+ *  Andre McCurdy <andre.mccurdy@nxp.com>
+ *
+ *  Heavily based upon - IndyDog	0.3
+ *  A Hardware Watchdog Device for SGI IP22
+ *
+ * (c) Copyright 2002 Guido Guenther <agx@sigxcpu.org>, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * based on softdog.c by Alan Cox <alan@redhat.com>
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <asm/mach-pnx833x/pnx833x.h>
+
+#define PFX "pnx833x: "
+#define WATCHDOG_TIMEOUT 30		/* 30 sec Maximum timeout */
+#define WATCHDOG_COUNT_FREQUENCY 68000000U /* Watchdog counts at 68MHZ. */
+
+/** CONFIG block */
+#define PNX833X_CONFIG                      (0x07000U)
+#define PNX833X_CONFIG_CPU_WATCHDOG         (0x54)
+#define PNX833X_CONFIG_CPU_WATCHDOG_COMPARE (0x58)
+#define PNX833X_CONFIG_CPU_COUNTERS_CONTROL (0x1c)
+
+/** RESET block */
+#define PNX833X_RESET                       (0x08000U)
+#define PNX833X_RESET_CONFIG                (0x08)
+
+static int pnx833x_wdt_alive;
+
+/* Set default timeout in MHZ.*/
+static int pnx833x_wdt_timeout = (WATCHDOG_TIMEOUT * WATCHDOG_COUNT_FREQUENCY);
+module_param(pnx833x_wdt_timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in Mhz. (68Mhz clock), default="
+			__MODULE_STRING(pnx833x_wdt_timeout) "(30 seconds).");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+					__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static int start_enabled = 1;
+module_param(start_enabled, int, 0);
+MODULE_PARM_DESC(start_enabled, "Watchdog is started on module insertion "
+				"(default=" __MODULE_STRING(start_enabled) ")");
+
+static void pnx833x_wdt_start(void)
+{
+	/* Enable watchdog causing reset. */
+	PNX833X_REG(PNX833X_RESET + PNX833X_RESET_CONFIG) |= 0x1;
+	/* Set timeout.*/
+	PNX833X_REG(PNX833X_CONFIG +
+		PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = pnx833x_wdt_timeout;
+	/* Enable watchdog. */
+	PNX833X_REG(PNX833X_CONFIG +
+				PNX833X_CONFIG_CPU_COUNTERS_CONTROL) |= 0x1;
+
+	printk(KERN_INFO PFX "Started watchdog timer.\n");
+}
+
+static void pnx833x_wdt_stop(void)
+{
+	/* Disable watchdog causing reset. */
+	PNX833X_REG(PNX833X_RESET + PNX833X_CONFIG) &= 0xFFFFFFFE;
+	/* Disable watchdog.*/
+	PNX833X_REG(PNX833X_CONFIG +
+			PNX833X_CONFIG_CPU_COUNTERS_CONTROL) &= 0xFFFFFFFE;
+
+	printk(KERN_INFO PFX "Stopped watchdog timer.\n");
+}
+
+static void pnx833x_wdt_ping(void)
+{
+	PNX833X_REG(PNX833X_CONFIG +
+		PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = pnx833x_wdt_timeout;
+}
+
+/*
+ *	Allow only one person to hold it open
+ */
+static int pnx833x_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &pnx833x_wdt_alive))
+		return -EBUSY;
+
+	if (nowayout)
+		__module_get(THIS_MODULE);
+
+	/* Activate timer */
+	if (!start_enabled)
+		pnx833x_wdt_start();
+
+	pnx833x_wdt_ping();
+
+	printk(KERN_INFO "Started watchdog timer.\n");
+
+	return nonseekable_open(inode, file);
+}
+
+static int pnx833x_wdt_release(struct inode *inode, struct file *file)
+{
+	/* Shut off the timer.
+	 * Lock it in if it's a module and we defined ...NOWAYOUT */
+	if (!nowayout)
+		pnx833x_wdt_stop(); /* Turn the WDT off */
+
+	clear_bit(0, &pnx833x_wdt_alive);
+	return 0;
+}
+
+static ssize_t pnx833x_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
+{
+	/* Refresh the timer. */
+	if (len)
+		pnx833x_wdt_ping();
+
+	return len;
+}
+
+static long pnx833x_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
+{
+	int options, new_timeout = 0;
+	uint32_t timeout, timeout_left = 0;
+
+	static struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT,
+		.firmware_version = 0,
+		.identity = "Hardware Watchdog for PNX833x",
+	};
+
+	switch (cmd) {
+	default:
+		return -ENOTTY;
+
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user((struct watchdog_info *)arg,
+				 &ident, sizeof(ident)))
+			return -EFAULT;
+		return 0;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, (int *)arg);
+
+	case WDIOC_SETOPTIONS:
+		if (get_user(options, (int *)arg))
+			return -EFAULT;
+
+		if (options & WDIOS_DISABLECARD)
+			pnx833x_wdt_stop();
+
+		if (options & WDIOS_ENABLECARD)
+			pnx833x_wdt_start();
+
+		return 0;
+
+	case WDIOC_KEEPALIVE:
+		pnx833x_wdt_ping();
+		return 0;
+
+	case WDIOC_SETTIMEOUT:
+	{
+		if (get_user(new_timeout, (int *)arg))
+			return -EFAULT;
+
+		pnx833x_wdt_timeout = new_timeout;
+		PNX833X_REG(PNX833X_CONFIG +
+			PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = new_timeout;
+		return put_user(new_timeout, (int *)arg);
+	}
+
+	case WDIOC_GETTIMEOUT:
+		timeout = PNX833X_REG(PNX833X_CONFIG +
+					PNX833X_CONFIG_CPU_WATCHDOG_COMPARE);
+		return put_user(timeout, (int *)arg);
+
+	case WDIOC_GETTIMELEFT:
+		timeout_left = PNX833X_REG(PNX833X_CONFIG +
+						PNX833X_CONFIG_CPU_WATCHDOG);
+		return put_user(timeout_left, (int *)arg);
+
+	}
+}
+
+static int pnx833x_wdt_notify_sys(struct notifier_block *this,
+					unsigned long code, void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		pnx833x_wdt_stop(); /* Turn the WDT off */
+
+	return NOTIFY_DONE;
+}
+
+static const struct file_operations pnx833x_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= pnx833x_wdt_write,
+	.unlocked_ioctl	= pnx833x_wdt_ioctl,
+	.open		= pnx833x_wdt_open,
+	.release	= pnx833x_wdt_release,
+};
+
+static struct miscdevice pnx833x_wdt_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &pnx833x_wdt_fops,
+};
+
+static struct notifier_block pnx833x_wdt_notifier = {
+	.notifier_call = pnx833x_wdt_notify_sys,
+};
+
+static char banner[] __initdata =
+	KERN_INFO PFX "Hardware Watchdog Timer for PNX833x: Version 0.1\n";
+
+static int __init watchdog_init(void)
+{
+	int ret, cause;
+
+	/* Lets check the reason for the reset.*/
+	cause = PNX833X_REG(PNX833X_RESET);
+	/*If bit 31 is set then watchdog was cause of reset.*/
+	if (cause & 0x80000000) {
+		printk(KERN_INFO PFX "The system was previously reset due to "
+			"the watchdog firing - please investigate...\n");
+	}
+
+	ret = register_reboot_notifier(&pnx833x_wdt_notifier);
+	if (ret) {
+		printk(KERN_ERR PFX
+			"cannot register reboot notifier (err=%d)\n", ret);
+		return ret;
+	}
+
+	ret = misc_register(&pnx833x_wdt_miscdev);
+	if (ret) {
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
+			WATCHDOG_MINOR, ret);
+		unregister_reboot_notifier(&pnx833x_wdt_notifier);
+		return ret;
+	}
+
+	printk(banner);
+	if (start_enabled)
+		pnx833x_wdt_start();
+
+	return 0;
+}
+
+static void __exit watchdog_exit(void)
+{
+	misc_deregister(&pnx833x_wdt_miscdev);
+	unregister_reboot_notifier(&pnx833x_wdt_notifier);
+}
+
+module_init(watchdog_init);
+module_exit(watchdog_exit);
+
+MODULE_AUTHOR("Daniel Laird/Andre McCurdy");
+MODULE_DESCRIPTION("Hardware Watchdog Device for PNX833x");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/rdc321x_wdt.c b/drivers/watchdog/rdc321x_wdt.c
index 36e221beedc..4976bfd1fce 100644
--- a/drivers/watchdog/rdc321x_wdt.c
+++ b/drivers/watchdog/rdc321x_wdt.c
@@ -245,7 +245,7 @@ static int __devinit rdc321x_wdt_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int rdc321x_wdt_remove(struct platform_device *pdev)
+static int __devexit rdc321x_wdt_remove(struct platform_device *pdev)
 {
 	if (rdc321x_wdt_device.queue) {
 		rdc321x_wdt_device.queue = 0;
@@ -259,7 +259,7 @@ static int rdc321x_wdt_remove(struct platform_device *pdev)
 
 static struct platform_driver rdc321x_wdt_driver = {
 	.probe = rdc321x_wdt_probe,
-	.remove = rdc321x_wdt_remove,
+	.remove = __devexit_p(rdc321x_wdt_remove),
 	.driver = {
 		.owner = THIS_MODULE,
 		.name = "rdc321x-wdt",
diff --git a/drivers/watchdog/rm9k_wdt.c b/drivers/watchdog/rm9k_wdt.c
index cce1982a1b5..2e444264226 100644
--- a/drivers/watchdog/rm9k_wdt.c
+++ b/drivers/watchdog/rm9k_wdt.c
@@ -345,8 +345,8 @@ static const struct resource *wdt_gpi_get_resource(struct platform_device *pdv,
 	return platform_get_resource_byname(pdv, type, buf);
 }
 
-/* No hotplugging on the platform bus - use __init */
-static int __init wdt_gpi_probe(struct platform_device *pdv)
+/* No hotplugging on the platform bus - use __devinit */
+static int __devinit wdt_gpi_probe(struct platform_device *pdv)
 {
 	int res;
 	const struct resource
@@ -373,7 +373,7 @@ static int __init wdt_gpi_probe(struct platform_device *pdv)
 	return res;
 }
 
-static int __exit wdt_gpi_remove(struct platform_device *dev)
+static int __devexit wdt_gpi_remove(struct platform_device *dev)
 {
 	int res;
 
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index e31925ee834..b57ac6b4914 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -68,15 +68,10 @@ MODULE_PARM_DESC(tmr_atboot,
 			__MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT));
 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
 			__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, 0 to reboot (default depends on ONLY_TESTING)");
+MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, "
+			"0 to reboot (default depends on ONLY_TESTING)");
 MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug, (default 0)");
 
-
-typedef enum close_state {
-	CLOSE_STATE_NOT,
-	CLOSE_STATE_ALLOW = 0x4021
-} close_state_t;
-
 static unsigned long open_lock;
 static struct device    *wdt_dev;	/* platform device attached to */
 static struct resource	*wdt_mem;
@@ -84,7 +79,7 @@ static struct resource	*wdt_irq;
 static struct clk	*wdt_clock;
 static void __iomem	*wdt_base;
 static unsigned int	 wdt_count;
-static close_state_t	 allow_close;
+static char		 expect_close;
 static DEFINE_SPINLOCK(wdt_lock);
 
 /* watchdog control routines */
@@ -211,7 +206,7 @@ static int s3c2410wdt_open(struct inode *inode, struct file *file)
 	if (nowayout)
 		__module_get(THIS_MODULE);
 
-	allow_close = CLOSE_STATE_NOT;
+	expect_close = 0;
 
 	/* start the timer */
 	s3c2410wdt_start();
@@ -225,13 +220,13 @@ static int s3c2410wdt_release(struct inode *inode, struct file *file)
 	 * 	Lock it in if it's a module and we set nowayout
 	 */
 
-	if (allow_close == CLOSE_STATE_ALLOW)
+	if (expect_close == 42)
 		s3c2410wdt_stop();
 	else {
 		dev_err(wdt_dev, "Unexpected close, not stopping watchdog\n");
 		s3c2410wdt_keepalive();
 	}
-	allow_close = CLOSE_STATE_NOT;
+	expect_close = 0;
 	clear_bit(0, &open_lock);
 	return 0;
 }
@@ -247,7 +242,7 @@ static ssize_t s3c2410wdt_write(struct file *file, const char __user *data,
 			size_t i;
 
 			/* In case it was set long ago */
-			allow_close = CLOSE_STATE_NOT;
+			expect_close = 0;
 
 			for (i = 0; i != len; i++) {
 				char c;
@@ -255,7 +250,7 @@ static ssize_t s3c2410wdt_write(struct file *file, const char __user *data,
 				if (get_user(c, data + i))
 					return -EFAULT;
 				if (c == 'V')
-					allow_close = CLOSE_STATE_ALLOW;
+					expect_close = 42;
 			}
 		}
 		s3c2410wdt_keepalive();
@@ -263,7 +258,7 @@ static ssize_t s3c2410wdt_write(struct file *file, const char __user *data,
 	return len;
 }
 
-#define OPTIONS WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE
+#define OPTIONS (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE)
 
 static const struct watchdog_info s3c2410_wdt_ident = {
 	.options          =     OPTIONS,
@@ -331,7 +326,7 @@ static irqreturn_t s3c2410wdt_irq(int irqno, void *param)
 }
 /* device interface */
 
-static int s3c2410wdt_probe(struct platform_device *pdev)
+static int __devinit s3c2410wdt_probe(struct platform_device *pdev)
 {
 	struct resource *res;
 	struct device *dev;
@@ -404,7 +399,8 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 			   "tmr_margin value out of range, default %d used\n",
 			       CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
 		else
-			dev_info(dev, "default timer value is out of range, cannot start\n");
+			dev_info(dev, "default timer value is out of range, "
+							"cannot start\n");
 	}
 
 	ret = misc_register(&s3c2410wdt_miscdev);
@@ -453,7 +449,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int s3c2410wdt_remove(struct platform_device *dev)
+static int __devexit s3c2410wdt_remove(struct platform_device *dev)
 {
 	release_resource(wdt_mem);
 	kfree(wdt_mem);
@@ -515,7 +511,7 @@ static int s3c2410wdt_resume(struct platform_device *dev)
 
 static struct platform_driver s3c2410wdt_driver = {
 	.probe		= s3c2410wdt_probe,
-	.remove		= s3c2410wdt_remove,
+	.remove		= __devexit_p(s3c2410wdt_remove),
 	.shutdown	= s3c2410wdt_shutdown,
 	.suspend	= s3c2410wdt_suspend,
 	.resume		= s3c2410wdt_resume,
diff --git a/drivers/watchdog/sb_wdog.c b/drivers/watchdog/sb_wdog.c
index 38f5831c929..9748eed7319 100644
--- a/drivers/watchdog/sb_wdog.c
+++ b/drivers/watchdog/sb_wdog.c
@@ -93,7 +93,7 @@ static int expect_close;
 
 static const struct watchdog_info ident = {
 	.options	= WDIOF_CARDRESET | WDIOF_SETTIMEOUT |
-						WDIOF_KEEPALIVEPING,
+					WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
 	.identity	= "SiByte Watchdog",
 };
 
@@ -269,9 +269,10 @@ irqreturn_t sbwdog_interrupt(int irq, void *addr)
 	 * if it's the second watchdog timer, it's for those users
 	 */
 	if (wd_cfg_reg == user_dog)
-		printk(KERN_CRIT
-			"%s in danger of initiating system reset in %ld.%01ld seconds\n",
-			ident.identity, wd_init / 1000000, (wd_init / 100000) % 10);
+		printk(KERN_CRIT "%s in danger of initiating system reset "
+			"in %ld.%01ld seconds\n",
+			ident.identity,
+			wd_init / 1000000, (wd_init / 100000) % 10);
 	else
 		cfg |= 1;
 
diff --git a/drivers/watchdog/sbc60xxwdt.c b/drivers/watchdog/sbc60xxwdt.c
index d1c390c7155..626d0e8e56c 100644
--- a/drivers/watchdog/sbc60xxwdt.c
+++ b/drivers/watchdog/sbc60xxwdt.c
@@ -372,8 +372,9 @@ static int __init sbc60xxwdt_init(void)
 						wdt_miscdev.minor, rc);
 		goto err_out_reboot;
 	}
-	printk(KERN_INFO PFX "WDT driver for 60XX single board computer initialised. timeout=%d sec (nowayout=%d)\n",
-		timeout, nowayout);
+	printk(KERN_INFO PFX
+		"WDT driver for 60XX single board computer initialised. "
+		"timeout=%d sec (nowayout=%d)\n", timeout, nowayout);
 
 	return 0;
 
diff --git a/drivers/watchdog/sbc8360.c b/drivers/watchdog/sbc8360.c
index b6e6799ec45..68e2e2d6f73 100644
--- a/drivers/watchdog/sbc8360.c
+++ b/drivers/watchdog/sbc8360.c
@@ -280,8 +280,8 @@ static int sbc8360_close(struct inode *inode, struct file *file)
 	if (expect_close == 42)
 		sbc8360_stop();
 	else
-		printk(KERN_CRIT PFX
-			"SBC8360 device closed unexpectedly.  SBC8360 will not stop!\n");
+		printk(KERN_CRIT PFX "SBC8360 device closed unexpectedly.  "
+						"SBC8360 will not stop!\n");
 
 	clear_bit(0, &sbc8360_is_open);
 	expect_close = 0;
diff --git a/drivers/watchdog/sbc_epx_c3.c b/drivers/watchdog/sbc_epx_c3.c
index e467ddcf796..28f1214457b 100644
--- a/drivers/watchdog/sbc_epx_c3.c
+++ b/drivers/watchdog/sbc_epx_c3.c
@@ -107,8 +107,7 @@ static long epx_c3_ioctl(struct file *file, unsigned int cmd,
 	int options, retval = -EINVAL;
 	int __user *argp = (void __user *)arg;
 	static const struct watchdog_info ident = {
-		.options		= WDIOF_KEEPALIVEPING |
-					  WDIOF_MAGICCLOSE,
+		.options		= WDIOF_KEEPALIVEPING,
 		.firmware_version	= 0,
 		.identity		= "Winsystems EPX-C3 H/W Watchdog",
 	};
@@ -174,8 +173,8 @@ static struct notifier_block epx_c3_notifier = {
 	.notifier_call = epx_c3_notify_sys,
 };
 
-static const char banner[] __initdata =
-    KERN_INFO PFX "Hardware Watchdog Timer for Winsystems EPX-C3 SBC: 0.1\n";
+static const char banner[] __initdata = KERN_INFO PFX
+	"Hardware Watchdog Timer for Winsystems EPX-C3 SBC: 0.1\n";
 
 static int __init watchdog_init(void)
 {
@@ -219,6 +218,9 @@ module_init(watchdog_init);
 module_exit(watchdog_exit);
 
 MODULE_AUTHOR("Calin A. Culianu <calin@ajvar.org>");
-MODULE_DESCRIPTION("Hardware Watchdog Device for Winsystems EPX-C3 SBC.  Note that there is no way to probe for this device -- so only use it if you are *sure* you are runnning on this specific SBC system from Winsystems!  It writes to IO ports 0x1ee and 0x1ef!");
+MODULE_DESCRIPTION("Hardware Watchdog Device for Winsystems EPX-C3 SBC.  "
+	"Note that there is no way to probe for this device -- "
+	"so only use it if you are *sure* you are runnning on this specific "
+	"SBC system from Winsystems!  It writes to IO ports 0x1ee and 0x1ef!");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/scx200_wdt.c b/drivers/watchdog/scx200_wdt.c
index 9e19a10a5bb..e67b76c0526 100644
--- a/drivers/watchdog/scx200_wdt.c
+++ b/drivers/watchdog/scx200_wdt.c
@@ -108,7 +108,9 @@ static int scx200_wdt_open(struct inode *inode, struct file *file)
 static int scx200_wdt_release(struct inode *inode, struct file *file)
 {
 	if (expect_close != 42)
-		printk(KERN_WARNING NAME ": watchdog device closed unexpectedly, will not disable the watchdog timer\n");
+		printk(KERN_WARNING NAME
+			": watchdog device closed unexpectedly, "
+			"will not disable the watchdog timer\n");
 	else if (!nowayout)
 		scx200_wdt_disable();
 	expect_close = 0;
@@ -163,7 +165,8 @@ static long scx200_wdt_ioctl(struct file *file, unsigned int cmd,
 	static const struct watchdog_info ident = {
 		.identity = "NatSemi SCx200 Watchdog",
 		.firmware_version = 1,
-		.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+		.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+						WDIOF_MAGICCLOSE,
 	};
 	int new_margin;
 
diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c
index cdc7138be30..a03f84e5ee1 100644
--- a/drivers/watchdog/shwdt.c
+++ b/drivers/watchdog/shwdt.c
@@ -494,7 +494,9 @@ MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
 
 module_param(clock_division_ratio, int, 0);
-MODULE_PARM_DESC(clock_division_ratio, "Clock division ratio. Valid ranges are from 0x5 (1.31ms) to 0x7 (5.25ms). (default=" __MODULE_STRING(clock_division_ratio) ")");
+MODULE_PARM_DESC(clock_division_ratio,
+	"Clock division ratio. Valid ranges are from 0x5 (1.31ms) "
+	"to 0x7 (5.25ms). (default=" __MODULE_STRING(clock_division_ratio) ")");
 
 module_param(heartbeat, int, 0);
 MODULE_PARM_DESC(heartbeat,
diff --git a/drivers/watchdog/softdog.c b/drivers/watchdog/softdog.c
index ebcc9cea5e9..833f49f43d4 100644
--- a/drivers/watchdog/softdog.c
+++ b/drivers/watchdog/softdog.c
@@ -71,7 +71,9 @@ static int soft_noboot = 0;
 #endif  /* ONLY_TESTING */
 
 module_param(soft_noboot, int, 0);
-MODULE_PARM_DESC(soft_noboot, "Softdog action, set to 1 to ignore reboots, 0 to reboot (default depends on ONLY_TESTING)");
+MODULE_PARM_DESC(soft_noboot,
+	"Softdog action, set to 1 to ignore reboots, 0 to reboot "
+					"(default depends on ONLY_TESTING)");
 
 /*
  *	Our timer
@@ -264,7 +266,8 @@ static struct notifier_block softdog_notifier = {
 	.notifier_call	= softdog_notify_sys,
 };
 
-static char banner[] __initdata = KERN_INFO "Software Watchdog Timer: 0.07 initialized. soft_noboot=%d soft_margin=%d sec (nowayout= %d)\n";
+static char banner[] __initdata = KERN_INFO "Software Watchdog Timer: 0.07 "
+	"initialized. soft_noboot=%d soft_margin=%d sec (nowayout= %d)\n";
 
 static int __init watchdog_init(void)
 {
diff --git a/drivers/watchdog/stmp3xxx_wdt.c b/drivers/watchdog/stmp3xxx_wdt.c
new file mode 100644
index 00000000000..5dd952681f3
--- /dev/null
+++ b/drivers/watchdog/stmp3xxx_wdt.c
@@ -0,0 +1,296 @@
+/*
+ * Watchdog driver for Freescale STMP37XX/STMP378X
+ *
+ * Author: Vitaly Wool <vital@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+
+#include <mach/platform.h>
+#include <mach/regs-rtc.h>
+
+#define DEFAULT_HEARTBEAT	19
+#define MAX_HEARTBEAT		(0x10000000 >> 6)
+
+/* missing bitmask in headers */
+#define BV_RTC_PERSISTENT1_GENERAL__RTC_FORCE_UPDATER     0x80000000
+
+#define WDT_IN_USE		0
+#define WDT_OK_TO_CLOSE		1
+
+#define WDOG_COUNTER_RATE	1000 /* 1 kHz clock */
+
+static DEFINE_SPINLOCK(stmp3xxx_wdt_io_lock);
+static unsigned long wdt_status;
+static const int nowayout = WATCHDOG_NOWAYOUT;
+static int heartbeat = DEFAULT_HEARTBEAT;
+static unsigned long boot_status;
+
+static void wdt_enable(u32 value)
+{
+	spin_lock(&stmp3xxx_wdt_io_lock);
+	__raw_writel(value, REGS_RTC_BASE + HW_RTC_WATCHDOG);
+	stmp3xxx_setl(BM_RTC_CTRL_WATCHDOGEN, REGS_RTC_BASE + HW_RTC_CTRL);
+	stmp3xxx_setl(BV_RTC_PERSISTENT1_GENERAL__RTC_FORCE_UPDATER,
+			REGS_RTC_BASE + HW_RTC_PERSISTENT1);
+	spin_unlock(&stmp3xxx_wdt_io_lock);
+}
+
+static void wdt_disable(void)
+{
+	spin_lock(&stmp3xxx_wdt_io_lock);
+	stmp3xxx_clearl(BV_RTC_PERSISTENT1_GENERAL__RTC_FORCE_UPDATER,
+			REGS_RTC_BASE + HW_RTC_PERSISTENT1);
+	stmp3xxx_clearl(BM_RTC_CTRL_WATCHDOGEN, REGS_RTC_BASE + HW_RTC_CTRL);
+	spin_unlock(&stmp3xxx_wdt_io_lock);
+}
+
+static void wdt_ping(void)
+{
+	wdt_enable(heartbeat * WDOG_COUNTER_RATE);
+}
+
+static int stmp3xxx_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(WDT_IN_USE, &wdt_status))
+		return -EBUSY;
+
+	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+	wdt_ping();
+
+	return nonseekable_open(inode, file);
+}
+
+static ssize_t stmp3xxx_wdt_write(struct file *file, const char __user *data,
+	size_t len, loff_t *ppos)
+{
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+
+			for (i = 0; i != len; i++) {
+				char c;
+
+				if (get_user(c, data + i))
+					return -EFAULT;
+				if (c == 'V')
+					set_bit(WDT_OK_TO_CLOSE, &wdt_status);
+			}
+		}
+		wdt_ping();
+	}
+
+	return len;
+}
+
+static struct watchdog_info ident = {
+	.options	= WDIOF_CARDRESET |
+			  WDIOF_MAGICCLOSE |
+			  WDIOF_SETTIMEOUT |
+			  WDIOF_KEEPALIVEPING,
+	.identity	= "STMP3XXX Watchdog",
+};
+
+static long stmp3xxx_wdt_ioctl(struct file *file, unsigned int cmd,
+	unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	int new_heartbeat, opts;
+	int ret = -ENOTTY;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		ret = copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+		break;
+
+	case WDIOC_GETSTATUS:
+		ret = put_user(0, p);
+		break;
+
+	case WDIOC_GETBOOTSTATUS:
+		ret = put_user(boot_status, p);
+		break;
+
+	case WDIOC_SETOPTIONS:
+		if (get_user(opts, p)) {
+			ret = -EFAULT;
+			break;
+		}
+		if (opts & WDIOS_DISABLECARD)
+			wdt_disable();
+		else if (opts & WDIOS_ENABLECARD)
+			wdt_ping();
+		else {
+			pr_debug("%s: unknown option 0x%x\n", __func__, opts);
+			ret = -EINVAL;
+			break;
+		}
+		ret = 0;
+		break;
+
+	case WDIOC_KEEPALIVE:
+		wdt_ping();
+		ret = 0;
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_heartbeat, p)) {
+			ret = -EFAULT;
+			break;
+		}
+		if (new_heartbeat <= 0 || new_heartbeat > MAX_HEARTBEAT) {
+			ret = -EINVAL;
+			break;
+		}
+
+		heartbeat = new_heartbeat;
+		wdt_ping();
+		/* Fall through */
+
+	case WDIOC_GETTIMEOUT:
+		ret = put_user(heartbeat, p);
+		break;
+	}
+	return ret;
+}
+
+static int stmp3xxx_wdt_release(struct inode *inode, struct file *file)
+{
+	int ret = 0;
+
+	if (!nowayout) {
+		if (!test_bit(WDT_OK_TO_CLOSE, &wdt_status)) {
+			wdt_ping();
+			pr_debug("%s: Device closed unexpectdly\n", __func__);
+			ret = -EINVAL;
+		} else {
+			wdt_disable();
+			clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+		}
+	}
+	clear_bit(WDT_IN_USE, &wdt_status);
+
+	return ret;
+}
+
+static const struct file_operations stmp3xxx_wdt_fops = {
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.write = stmp3xxx_wdt_write,
+	.unlocked_ioctl = stmp3xxx_wdt_ioctl,
+	.open = stmp3xxx_wdt_open,
+	.release = stmp3xxx_wdt_release,
+};
+
+static struct miscdevice stmp3xxx_wdt_miscdev = {
+	.minor = WATCHDOG_MINOR,
+	.name = "watchdog",
+	.fops = &stmp3xxx_wdt_fops,
+};
+
+static int __devinit stmp3xxx_wdt_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+
+	if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT)
+		heartbeat = DEFAULT_HEARTBEAT;
+
+	boot_status = __raw_readl(REGS_RTC_BASE + HW_RTC_PERSISTENT1) &
+			BV_RTC_PERSISTENT1_GENERAL__RTC_FORCE_UPDATER;
+	boot_status = !!boot_status;
+	stmp3xxx_clearl(BV_RTC_PERSISTENT1_GENERAL__RTC_FORCE_UPDATER,
+			REGS_RTC_BASE + HW_RTC_PERSISTENT1);
+	wdt_disable();		/* disable for now */
+
+	ret = misc_register(&stmp3xxx_wdt_miscdev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "cannot register misc device\n");
+		return ret;
+	}
+
+	printk(KERN_INFO "stmp3xxx watchdog: initialized, heartbeat %d sec\n",
+		heartbeat);
+
+	return ret;
+}
+
+static int __devexit stmp3xxx_wdt_remove(struct platform_device *pdev)
+{
+	misc_deregister(&stmp3xxx_wdt_miscdev);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int wdt_suspended;
+static u32 wdt_saved_time;
+
+static int stmp3xxx_wdt_suspend(struct platform_device *pdev,
+				pm_message_t state)
+{
+	if (__raw_readl(REGS_RTC_BASE + HW_RTC_CTRL) &
+		BM_RTC_CTRL_WATCHDOGEN) {
+		wdt_suspended = 1;
+		wdt_saved_time = __raw_readl(REGS_RTC_BASE + HW_RTC_WATCHDOG);
+		wdt_disable();
+	}
+	return 0;
+}
+
+static int stmp3xxx_wdt_resume(struct platform_device *pdev)
+{
+	if (wdt_suspended) {
+		wdt_enable(wdt_saved_time);
+		wdt_suspended = 0;
+	}
+	return 0;
+}
+#else
+#define stmp3xxx_wdt_suspend	NULL
+#define stmp3xxx_wdt_resume	NULL
+#endif
+
+static struct platform_driver platform_wdt_driver = {
+	.driver = {
+		.name = "stmp3xxx_wdt",
+	},
+	.probe = stmp3xxx_wdt_probe,
+	.remove = __devexit_p(stmp3xxx_wdt_remove),
+	.suspend = stmp3xxx_wdt_suspend,
+	.resume = stmp3xxx_wdt_resume,
+};
+
+static int __init stmp3xxx_wdt_init(void)
+{
+	return platform_driver_register(&platform_wdt_driver);
+}
+
+static void __exit stmp3xxx_wdt_exit(void)
+{
+	return platform_driver_unregister(&platform_wdt_driver);
+}
+
+module_init(stmp3xxx_wdt_init);
+module_exit(stmp3xxx_wdt_exit);
+
+MODULE_DESCRIPTION("STMP3XXX Watchdog Driver");
+MODULE_LICENSE("GPL");
+
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat,
+		 "Watchdog heartbeat period in seconds from 1 to "
+		 __MODULE_STRING(MAX_HEARTBEAT) ", default "
+		 __MODULE_STRING(DEFAULT_HEARTBEAT));
+
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/twl4030_wdt.c b/drivers/watchdog/twl4030_wdt.c
new file mode 100644
index 00000000000..cb46556f297
--- /dev/null
+++ b/drivers/watchdog/twl4030_wdt.c
@@ -0,0 +1,272 @@
+/*
+ * Copyright (C) Nokia Corporation
+ *
+ * Written by Timo Kokkonen <timo.t.kokkonen at nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/miscdevice.h>
+#include <linux/uaccess.h>
+#include <linux/i2c/twl4030.h>
+
+#define TWL4030_WATCHDOG_CFG_REG_OFFS	0x3
+
+#define TWL4030_WDT_STATE_OPEN		0x1
+#define TWL4030_WDT_STATE_ACTIVE	0x8
+
+static struct platform_device *twl4030_wdt_dev;
+
+struct twl4030_wdt {
+	struct miscdevice	miscdev;
+	int			timer_margin;
+	unsigned long		state;
+};
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
+	"(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static int twl4030_wdt_write(unsigned char val)
+{
+	return twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, val,
+					TWL4030_WATCHDOG_CFG_REG_OFFS);
+}
+
+static int twl4030_wdt_enable(struct twl4030_wdt *wdt)
+{
+	return twl4030_wdt_write(wdt->timer_margin + 1);
+}
+
+static int twl4030_wdt_disable(struct twl4030_wdt *wdt)
+{
+	return twl4030_wdt_write(0);
+}
+
+static int twl4030_wdt_set_timeout(struct twl4030_wdt *wdt, int timeout)
+{
+	if (timeout < 0 || timeout > 30) {
+		dev_warn(wdt->miscdev.parent,
+			"Timeout can only be in the range [0-30] seconds");
+		return -EINVAL;
+	}
+	wdt->timer_margin = timeout;
+	return twl4030_wdt_enable(wdt);
+}
+
+static ssize_t twl4030_wdt_write_fop(struct file *file,
+		const char __user *data, size_t len, loff_t *ppos)
+{
+	struct twl4030_wdt *wdt = file->private_data;
+
+	if (len)
+		twl4030_wdt_enable(wdt);
+
+	return len;
+}
+
+static long twl4030_wdt_ioctl(struct file *file,
+		unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	int new_margin;
+	struct twl4030_wdt *wdt = file->private_data;
+
+	static const struct watchdog_info twl4030_wd_ident = {
+		.identity = "TWL4030 Watchdog",
+		.options = WDIOF_SETTIMEOUT,
+		.firmware_version = 0,
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &twl4030_wd_ident,
+				sizeof(twl4030_wd_ident)) ? -EFAULT : 0;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+
+	case WDIOC_KEEPALIVE:
+		twl4030_wdt_enable(wdt);
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_margin, p))
+			return -EFAULT;
+		if (twl4030_wdt_set_timeout(wdt, new_margin))
+			return -EINVAL;
+		return put_user(wdt->timer_margin, p);
+
+	case WDIOC_GETTIMEOUT:
+		return put_user(wdt->timer_margin, p);
+
+	default:
+		return -ENOTTY;
+	}
+
+	return 0;
+}
+
+static int twl4030_wdt_open(struct inode *inode, struct file *file)
+{
+	struct twl4030_wdt *wdt = platform_get_drvdata(twl4030_wdt_dev);
+
+	/* /dev/watchdog can only be opened once */
+	if (test_and_set_bit(0, &wdt->state))
+		return -EBUSY;
+
+	wdt->state |= TWL4030_WDT_STATE_ACTIVE;
+	file->private_data = (void *) wdt;
+
+	twl4030_wdt_enable(wdt);
+	return nonseekable_open(inode, file);
+}
+
+static int twl4030_wdt_release(struct inode *inode, struct file *file)
+{
+	struct twl4030_wdt *wdt = file->private_data;
+	if (nowayout) {
+		dev_alert(wdt->miscdev.parent,
+		       "Unexpected close, watchdog still running!\n");
+		twl4030_wdt_enable(wdt);
+	} else {
+		if (twl4030_wdt_disable(wdt))
+			return -EFAULT;
+		wdt->state &= ~TWL4030_WDT_STATE_ACTIVE;
+	}
+
+	clear_bit(0, &wdt->state);
+	return 0;
+}
+
+static const struct file_operations twl4030_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.open		= twl4030_wdt_open,
+	.release	= twl4030_wdt_release,
+	.unlocked_ioctl	= twl4030_wdt_ioctl,
+	.write		= twl4030_wdt_write_fop,
+};
+
+static int __devinit twl4030_wdt_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct twl4030_wdt *wdt;
+
+	wdt = kzalloc(sizeof(struct twl4030_wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	wdt->state		= 0;
+	wdt->timer_margin	= 30;
+	wdt->miscdev.parent	= &pdev->dev;
+	wdt->miscdev.fops	= &twl4030_wdt_fops;
+	wdt->miscdev.minor	= WATCHDOG_MINOR;
+	wdt->miscdev.name	= "watchdog";
+
+	platform_set_drvdata(pdev, wdt);
+
+	twl4030_wdt_dev = pdev;
+
+	ret = misc_register(&wdt->miscdev);
+	if (ret) {
+		dev_err(wdt->miscdev.parent,
+			"Failed to register misc device\n");
+		platform_set_drvdata(pdev, NULL);
+		kfree(wdt);
+		twl4030_wdt_dev = NULL;
+		return ret;
+	}
+	return 0;
+}
+
+static int __devexit twl4030_wdt_remove(struct platform_device *pdev)
+{
+	struct twl4030_wdt *wdt = platform_get_drvdata(pdev);
+
+	if (wdt->state & TWL4030_WDT_STATE_ACTIVE)
+		if (twl4030_wdt_disable(wdt))
+			return -EFAULT;
+
+	wdt->state &= ~TWL4030_WDT_STATE_ACTIVE;
+	misc_deregister(&wdt->miscdev);
+
+	platform_set_drvdata(pdev, NULL);
+	kfree(wdt);
+	twl4030_wdt_dev = NULL;
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int twl4030_wdt_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct twl4030_wdt *wdt = platform_get_drvdata(pdev);
+	if (wdt->state & TWL4030_WDT_STATE_ACTIVE)
+		return twl4030_wdt_disable(wdt);
+
+	return 0;
+}
+
+static int twl4030_wdt_resume(struct platform_device *pdev)
+{
+	struct twl4030_wdt *wdt = platform_get_drvdata(pdev);
+	if (wdt->state & TWL4030_WDT_STATE_ACTIVE)
+		return twl4030_wdt_enable(wdt);
+
+	return 0;
+}
+#else
+#define twl4030_wdt_suspend        NULL
+#define twl4030_wdt_resume         NULL
+#endif
+
+static struct platform_driver twl4030_wdt_driver = {
+	.probe		= twl4030_wdt_probe,
+	.remove		= __devexit_p(twl4030_wdt_remove),
+	.suspend	= twl4030_wdt_suspend,
+	.resume		= twl4030_wdt_resume,
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "twl4030_wdt",
+	},
+};
+
+static int __devinit twl4030_wdt_init(void)
+{
+	return platform_driver_register(&twl4030_wdt_driver);
+}
+module_init(twl4030_wdt_init);
+
+static void __devexit twl4030_wdt_exit(void)
+{
+	platform_driver_unregister(&twl4030_wdt_driver);
+}
+module_exit(twl4030_wdt_exit);
+
+MODULE_AUTHOR("Nokia Corporation");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:twl4030_wdt");
+
diff --git a/drivers/watchdog/w83697hf_wdt.c b/drivers/watchdog/w83697hf_wdt.c
index a9c7f352fcb..af08972de50 100644
--- a/drivers/watchdog/w83697hf_wdt.c
+++ b/drivers/watchdog/w83697hf_wdt.c
@@ -413,7 +413,8 @@ static int __init wdt_init(void)
 	w83697hf_init();
 	if (early_disable) {
 		if (wdt_running())
-			printk(KERN_WARNING PFX "Stopping previously enabled watchdog until userland kicks in\n");
+			printk(KERN_WARNING PFX "Stopping previously enabled "
+					"watchdog until userland kicks in\n");
 		wdt_disable();
 	}
 
diff --git a/drivers/watchdog/wdrtas.c b/drivers/watchdog/wdrtas.c
index a38fa4907c9..a4fe7a38d9b 100644
--- a/drivers/watchdog/wdrtas.c
+++ b/drivers/watchdog/wdrtas.c
@@ -49,12 +49,7 @@ MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
 MODULE_ALIAS_MISCDEV(TEMP_MINOR);
 
-#ifdef CONFIG_WATCHDOG_NOWAYOUT
-static int wdrtas_nowayout = 1;
-#else
-static int wdrtas_nowayout = 0;
-#endif
-
+static int wdrtas_nowayout = WATCHDOG_NOWAYOUT;
 static atomic_t wdrtas_miscdev_open = ATOMIC_INIT(0);
 static char wdrtas_expect_close;
 
diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c
index c45839a4a34..7a1bdc7c95a 100644
--- a/drivers/watchdog/wdt_pci.c
+++ b/drivers/watchdog/wdt_pci.c
@@ -2,7 +2,7 @@
  *	Industrial Computer Source PCI-WDT500/501 driver
  *
  *	(c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>,
- *						 All Rights Reserved.
+ *						All Rights Reserved.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -99,14 +99,16 @@ MODULE_PARM_DESC(nowayout,
 		"Watchdog cannot be stopped once started (default="
 				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
-#ifdef CONFIG_WDT_501_PCI
 /* Support for the Fan Tachometer on the PCI-WDT501 */
 static int tachometer;
-
 module_param(tachometer, int, 0);
 MODULE_PARM_DESC(tachometer,
-	"PCI-WDT501 Fan Tachometer support (0=disable, default=0)");
-#endif /* CONFIG_WDT_501_PCI */
+		"PCI-WDT501 Fan Tachometer support (0=disable, default=0)");
+
+static int type = 500;
+module_param(type, int, 0);
+MODULE_PARM_DESC(type,
+		"PCI-WDT501 Card type (500 or 501 , default=500)");
 
 /*
  *	Programming support
@@ -266,22 +268,21 @@ static int wdtpci_get_status(int *status)
 		*status |= WDIOF_EXTERN1;
 	if (new_status & WDC_SR_ISII1)
 		*status |= WDIOF_EXTERN2;
-#ifdef CONFIG_WDT_501_PCI
-	if (!(new_status & WDC_SR_TGOOD))
-		*status |= WDIOF_OVERHEAT;
-	if (!(new_status & WDC_SR_PSUOVER))
-		*status |= WDIOF_POWEROVER;
-	if (!(new_status & WDC_SR_PSUUNDR))
-		*status |= WDIOF_POWERUNDER;
-	if (tachometer) {
-		if (!(new_status & WDC_SR_FANGOOD))
-			*status |= WDIOF_FANFAULT;
+	if (type == 501) {
+		if (!(new_status & WDC_SR_TGOOD))
+			*status |= WDIOF_OVERHEAT;
+		if (!(new_status & WDC_SR_PSUOVER))
+			*status |= WDIOF_POWEROVER;
+		if (!(new_status & WDC_SR_PSUUNDR))
+			*status |= WDIOF_POWERUNDER;
+		if (tachometer) {
+			if (!(new_status & WDC_SR_FANGOOD))
+				*status |= WDIOF_FANFAULT;
+		}
 	}
-#endif /* CONFIG_WDT_501_PCI */
 	return 0;
 }
 
-#ifdef CONFIG_WDT_501_PCI
 /**
  *	wdtpci_get_temperature:
  *
@@ -300,7 +301,6 @@ static int wdtpci_get_temperature(int *temperature)
 	*temperature = (c * 11 / 15) + 7;
 	return 0;
 }
-#endif /* CONFIG_WDT_501_PCI */
 
 /**
  *	wdtpci_interrupt:
@@ -327,22 +327,22 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id)
 
 	printk(KERN_CRIT PFX "status %d\n", status);
 
-#ifdef CONFIG_WDT_501_PCI
-	if (!(status & WDC_SR_TGOOD)) {
-		u8 alarm = inb(WDT_RT);
-		printk(KERN_CRIT PFX "Overheat alarm.(%d)\n", alarm);
-		udelay(8);
-	}
-	if (!(status & WDC_SR_PSUOVER))
-		printk(KERN_CRIT PFX "PSU over voltage.\n");
-	if (!(status & WDC_SR_PSUUNDR))
-		printk(KERN_CRIT PFX "PSU under voltage.\n");
-	if (tachometer) {
-		if (!(status & WDC_SR_FANGOOD))
-			printk(KERN_CRIT PFX "Possible fan fault.\n");
+	if (type == 501) {
+		if (!(status & WDC_SR_TGOOD)) {
+			printk(KERN_CRIT PFX "Overheat alarm.(%d)\n",
+								inb(WDT_RT));
+			udelay(8);
+		}
+		if (!(status & WDC_SR_PSUOVER))
+			printk(KERN_CRIT PFX "PSU over voltage.\n");
+		if (!(status & WDC_SR_PSUUNDR))
+			printk(KERN_CRIT PFX "PSU under voltage.\n");
+		if (tachometer) {
+			if (!(status & WDC_SR_FANGOOD))
+				printk(KERN_CRIT PFX "Possible fan fault.\n");
+		}
 	}
-#endif /* CONFIG_WDT_501_PCI */
-	if (!(status&WDC_SR_WCCR)) {
+	if (!(status & WDC_SR_WCCR)) {
 #ifdef SOFTWARE_REBOOT
 #ifdef ONLY_TESTING
 		printk(KERN_CRIT PFX "Would Reboot.\n");
@@ -371,12 +371,13 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id)
  */
 
 static ssize_t wdtpci_write(struct file *file, const char __user *buf,
-					size_t count, loff_t *ppos)
+						size_t count, loff_t *ppos)
 {
 	if (count) {
 		if (!nowayout) {
 			size_t i;
 
+			/* In case it was set long ago */
 			expect_close = 0;
 
 			for (i = 0; i != count; i++) {
@@ -406,10 +407,10 @@ static ssize_t wdtpci_write(struct file *file, const char __user *buf,
 static long wdtpci_ioctl(struct file *file, unsigned int cmd,
 							unsigned long arg)
 {
-	int new_heartbeat;
-	int status;
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
+	int new_heartbeat;
+	int status;
 
 	static struct watchdog_info ident = {
 		.options =		WDIOF_SETTIMEOUT|
@@ -421,11 +422,12 @@ static long wdtpci_ioctl(struct file *file, unsigned int cmd,
 
 	/* Add options according to the card we have */
 	ident.options |= (WDIOF_EXTERN1|WDIOF_EXTERN2);
-#ifdef CONFIG_WDT_501_PCI
-	ident.options |= (WDIOF_OVERHEAT|WDIOF_POWERUNDER|WDIOF_POWEROVER);
-	if (tachometer)
-		ident.options |= WDIOF_FANFAULT;
-#endif /* CONFIG_WDT_501_PCI */
+	if (type == 501) {
+		ident.options |= (WDIOF_OVERHEAT|WDIOF_POWERUNDER|
+							WDIOF_POWEROVER);
+		if (tachometer)
+			ident.options |= WDIOF_FANFAULT;
+	}
 
 	switch (cmd) {
 	case WDIOC_GETSUPPORT:
@@ -503,7 +505,6 @@ static int wdtpci_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-#ifdef CONFIG_WDT_501_PCI
 /**
  *	wdtpci_temp_read:
  *	@file: file handle to the watchdog board
@@ -554,7 +555,6 @@ static int wdtpci_temp_release(struct inode *inode, struct file *file)
 {
 	return 0;
 }
-#endif /* CONFIG_WDT_501_PCI */
 
 /**
  *	notify_sys:
@@ -596,7 +596,6 @@ static struct miscdevice wdtpci_miscdev = {
 	.fops	= &wdtpci_fops,
 };
 
-#ifdef CONFIG_WDT_501_PCI
 static const struct file_operations wdtpci_temp_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
@@ -610,7 +609,6 @@ static struct miscdevice temp_miscdev = {
 	.name	= "temperature",
 	.fops	= &wdtpci_temp_fops,
 };
-#endif /* CONFIG_WDT_501_PCI */
 
 /*
  *	The WDT card needs to learn about soft shutdowns in order to
@@ -633,6 +631,11 @@ static int __devinit wdtpci_init_one(struct pci_dev *dev,
 		return -ENODEV;
 	}
 
+	if (type != 500 && type != 501) {
+		printk(KERN_ERR PFX "unknown card type '%d'.\n", type);
+		return -ENODEV;
+	}
+
 	if (pci_enable_device(dev)) {
 		printk(KERN_ERR PFX "Not possible to enable PCI Device\n");
 		return -ENODEV;
@@ -678,15 +681,15 @@ static int __devinit wdtpci_init_one(struct pci_dev *dev,
 		goto out_irq;
 	}
 
-#ifdef CONFIG_WDT_501_PCI
-	ret = misc_register(&temp_miscdev);
-	if (ret) {
-		printk(KERN_ERR PFX
+	if (type == 501) {
+		ret = misc_register(&temp_miscdev);
+		if (ret) {
+			printk(KERN_ERR PFX
 			"cannot register miscdev on minor=%d (err=%d)\n",
-					TEMP_MINOR, ret);
-		goto out_rbt;
+							TEMP_MINOR, ret);
+			goto out_rbt;
+		}
 	}
-#endif /* CONFIG_WDT_501_PCI */
 
 	ret = misc_register(&wdtpci_miscdev);
 	if (ret) {
@@ -698,20 +701,18 @@ static int __devinit wdtpci_init_one(struct pci_dev *dev,
 
 	printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n",
 		heartbeat, nowayout);
-#ifdef CONFIG_WDT_501_PCI
-	printk(KERN_INFO "wdt: Fan Tachometer is %s\n",
+	if (type == 501)
+		printk(KERN_INFO "wdt: Fan Tachometer is %s\n",
 				(tachometer ? "Enabled" : "Disabled"));
-#endif /* CONFIG_WDT_501_PCI */
 
 	ret = 0;
 out:
 	return ret;
 
 out_misc:
-#ifdef CONFIG_WDT_501_PCI
-	misc_deregister(&temp_miscdev);
+	if (type == 501)
+		misc_deregister(&temp_miscdev);
 out_rbt:
-#endif /* CONFIG_WDT_501_PCI */
 	unregister_reboot_notifier(&wdtpci_notifier);
 out_irq:
 	free_irq(irq, &wdtpci_miscdev);
@@ -728,9 +729,8 @@ static void __devexit wdtpci_remove_one(struct pci_dev *pdev)
 	/* here we assume only one device will ever have
 	 * been picked up and registered by probe function */
 	misc_deregister(&wdtpci_miscdev);
-#ifdef CONFIG_WDT_501_PCI
-	misc_deregister(&temp_miscdev);
-#endif /* CONFIG_WDT_501_PCI */
+	if (type == 501)
+		misc_deregister(&temp_miscdev);
 	unregister_reboot_notifier(&wdtpci_notifier);
 	free_irq(irq, &wdtpci_miscdev);
 	release_region(io, 16);
diff --git a/fs/Kconfig b/fs/Kconfig
index d78e950402c..a97263be6a9 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -236,10 +236,12 @@ source "fs/nfsd/Kconfig"
 
 config LOCKD
 	tristate
+	depends on FILE_LOCKING
 
 config LOCKD_V4
 	bool
 	depends on NFSD_V3 || NFS_V3
+	depends on FILE_LOCKING
 	default y
 
 config EXPORTFS
diff --git a/fs/anon_inodes.c b/fs/anon_inodes.c
index 1dd96d4406c..47d4a01c539 100644
--- a/fs/anon_inodes.c
+++ b/fs/anon_inodes.c
@@ -52,6 +52,19 @@ static const struct dentry_operations anon_inodefs_dentry_operations = {
 	.d_delete	= anon_inodefs_delete_dentry,
 };
 
+/*
+ * nop .set_page_dirty method so that people can use .page_mkwrite on
+ * anon inodes.
+ */
+static int anon_set_page_dirty(struct page *page)
+{
+	return 0;
+};
+
+static const struct address_space_operations anon_aops = {
+	.set_page_dirty = anon_set_page_dirty,
+};
+
 /**
  * anon_inode_getfd - creates a new file instance by hooking it up to an
  *                    anonymous inode, and a dentry that describe the "class"
@@ -151,6 +164,8 @@ static struct inode *anon_inode_mkinode(void)
 
 	inode->i_fop = &anon_inode_fops;
 
+	inode->i_mapping->a_ops = &anon_aops;
+
 	/*
 	 * Mark the inode dirty from the very beginning,
 	 * that way it will never be moved to the dirty
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index 40381df3486..9fa212b014a 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -1340,8 +1340,10 @@ static void fill_prstatus(struct elf_prstatus *prstatus,
 	prstatus->pr_info.si_signo = prstatus->pr_cursig = signr;
 	prstatus->pr_sigpend = p->pending.signal.sig[0];
 	prstatus->pr_sighold = p->blocked.sig[0];
+	rcu_read_lock();
+	prstatus->pr_ppid = task_pid_vnr(rcu_dereference(p->real_parent));
+	rcu_read_unlock();
 	prstatus->pr_pid = task_pid_vnr(p);
-	prstatus->pr_ppid = task_pid_vnr(p->real_parent);
 	prstatus->pr_pgrp = task_pgrp_vnr(p);
 	prstatus->pr_sid = task_session_vnr(p);
 	if (thread_group_leader(p)) {
@@ -1382,8 +1384,10 @@ static int fill_psinfo(struct elf_prpsinfo *psinfo, struct task_struct *p,
 			psinfo->pr_psargs[i] = ' ';
 	psinfo->pr_psargs[len] = 0;
 
+	rcu_read_lock();
+	psinfo->pr_ppid = task_pid_vnr(rcu_dereference(p->real_parent));
+	rcu_read_unlock();
 	psinfo->pr_pid = task_pid_vnr(p);
-	psinfo->pr_ppid = task_pid_vnr(p->real_parent);
 	psinfo->pr_pgrp = task_pgrp_vnr(p);
 	psinfo->pr_sid = task_session_vnr(p);
 
diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c
index fdb66faa24f..20fbeced472 100644
--- a/fs/binfmt_elf_fdpic.c
+++ b/fs/binfmt_elf_fdpic.c
@@ -1387,8 +1387,10 @@ static void fill_prstatus(struct elf_prstatus *prstatus,
 	prstatus->pr_info.si_signo = prstatus->pr_cursig = signr;
 	prstatus->pr_sigpend = p->pending.signal.sig[0];
 	prstatus->pr_sighold = p->blocked.sig[0];
+	rcu_read_lock();
+	prstatus->pr_ppid = task_pid_vnr(rcu_dereference(p->real_parent));
+	rcu_read_unlock();
 	prstatus->pr_pid = task_pid_vnr(p);
-	prstatus->pr_ppid = task_pid_vnr(p->real_parent);
 	prstatus->pr_pgrp = task_pgrp_vnr(p);
 	prstatus->pr_sid = task_session_vnr(p);
 	if (thread_group_leader(p)) {
@@ -1432,8 +1434,10 @@ static int fill_psinfo(struct elf_prpsinfo *psinfo, struct task_struct *p,
 			psinfo->pr_psargs[i] = ' ';
 	psinfo->pr_psargs[len] = 0;
 
+	rcu_read_lock();
+	psinfo->pr_ppid = task_pid_vnr(rcu_dereference(p->real_parent));
+	rcu_read_unlock();
 	psinfo->pr_pid = task_pid_vnr(p);
-	psinfo->pr_ppid = task_pid_vnr(p->real_parent);
 	psinfo->pr_pgrp = task_pgrp_vnr(p);
 	psinfo->pr_sid = task_session_vnr(p);
 
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index c5ded5ff72b..c135202c38b 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -94,7 +94,6 @@
 #include <linux/atm_tcp.h>
 #include <linux/sonet.h>
 #include <linux/atm_suni.h>
-#include <linux/mtd/mtd.h>
 
 #include <linux/usb.h>
 #include <linux/usbdevice_fs.h>
@@ -1405,46 +1404,6 @@ static int ioc_settimeout(unsigned int fd, unsigned int cmd, unsigned long arg)
 #define HIDPGETCONNLIST	_IOR('H', 210, int)
 #define HIDPGETCONNINFO	_IOR('H', 211, int)
 
-struct mtd_oob_buf32 {
-	u_int32_t start;
-	u_int32_t length;
-	compat_caddr_t ptr;	/* unsigned char* */
-};
-
-#define MEMWRITEOOB32 	_IOWR('M',3,struct mtd_oob_buf32)
-#define MEMREADOOB32 	_IOWR('M',4,struct mtd_oob_buf32)
-
-static int mtd_rw_oob(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	struct mtd_oob_buf __user *buf = compat_alloc_user_space(sizeof(*buf));
-	struct mtd_oob_buf32 __user *buf32 = compat_ptr(arg);
-	u32 data;
-	char __user *datap;
-	unsigned int real_cmd;
-	int err;
-
-	real_cmd = (cmd == MEMREADOOB32) ?
-		MEMREADOOB : MEMWRITEOOB;
-
-	if (copy_in_user(&buf->start, &buf32->start,
-			 2 * sizeof(u32)) ||
-	    get_user(data, &buf32->ptr))
-		return -EFAULT;
-	datap = compat_ptr(data);
-	if (put_user(datap, &buf->ptr))
-		return -EFAULT;
-
-	err = sys_ioctl(fd, real_cmd, (unsigned long) buf);
-
-	if (!err) {
-		if (copy_in_user(&buf32->start, &buf->start,
-				 2 * sizeof(u32)))
-			err = -EFAULT;
-	}
-
-	return err;
-}	
-
 #ifdef CONFIG_BLOCK
 struct raw32_config_request
 {
@@ -2426,15 +2385,6 @@ COMPATIBLE_IOCTL(USBDEVFS_SUBMITURB32)
 COMPATIBLE_IOCTL(USBDEVFS_REAPURB32)
 COMPATIBLE_IOCTL(USBDEVFS_REAPURBNDELAY32)
 COMPATIBLE_IOCTL(USBDEVFS_CLEAR_HALT)
-/* MTD */
-COMPATIBLE_IOCTL(MEMGETINFO)
-COMPATIBLE_IOCTL(MEMERASE)
-COMPATIBLE_IOCTL(MEMLOCK)
-COMPATIBLE_IOCTL(MEMUNLOCK)
-COMPATIBLE_IOCTL(MEMGETREGIONCOUNT)
-COMPATIBLE_IOCTL(MEMGETREGIONINFO)
-COMPATIBLE_IOCTL(MEMGETBADBLOCK)
-COMPATIBLE_IOCTL(MEMSETBADBLOCK)
 /* NBD */
 ULONG_IOCTL(NBD_SET_SOCK)
 ULONG_IOCTL(NBD_SET_BLKSIZE)
@@ -2544,8 +2494,6 @@ COMPATIBLE_IOCTL(JSIOCGBUTTONS)
 COMPATIBLE_IOCTL(JSIOCGNAME(0))
 
 /* now things that need handlers */
-HANDLE_IOCTL(MEMREADOOB32, mtd_rw_oob)
-HANDLE_IOCTL(MEMWRITEOOB32, mtd_rw_oob)
 #ifdef CONFIG_NET
 HANDLE_IOCTL(SIOCGIFNAME, dev_ifname32)
 HANDLE_IOCTL(SIOCGIFCONF, dev_ifconf)
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index 5458e80fc55..085c5c06342 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -98,7 +98,7 @@ struct epoll_filefd {
 struct nested_call_node {
 	struct list_head llink;
 	void *cookie;
-	int cpu;
+	void *ctx;
 };
 
 /*
@@ -317,17 +317,17 @@ static void ep_nested_calls_init(struct nested_calls *ncalls)
  * @nproc: Nested call core function pointer.
  * @priv: Opaque data to be passed to the @nproc callback.
  * @cookie: Cookie to be used to identify this nested call.
+ * @ctx: This instance context.
  *
  * Returns: Returns the code returned by the @nproc callback, or -1 if
  *          the maximum recursion limit has been exceeded.
  */
 static int ep_call_nested(struct nested_calls *ncalls, int max_nests,
 			  int (*nproc)(void *, void *, int), void *priv,
-			  void *cookie)
+			  void *cookie, void *ctx)
 {
 	int error, call_nests = 0;
 	unsigned long flags;
-	int this_cpu = get_cpu();
 	struct list_head *lsthead = &ncalls->tasks_call_list;
 	struct nested_call_node *tncur;
 	struct nested_call_node tnode;
@@ -340,7 +340,7 @@ static int ep_call_nested(struct nested_calls *ncalls, int max_nests,
 	 * very much limited.
 	 */
 	list_for_each_entry(tncur, lsthead, llink) {
-		if (tncur->cpu == this_cpu &&
+		if (tncur->ctx == ctx &&
 		    (tncur->cookie == cookie || ++call_nests > max_nests)) {
 			/*
 			 * Ops ... loop detected or maximum nest level reached.
@@ -352,7 +352,7 @@ static int ep_call_nested(struct nested_calls *ncalls, int max_nests,
 	}
 
 	/* Add the current task and cookie to the list */
-	tnode.cpu = this_cpu;
+	tnode.ctx = ctx;
 	tnode.cookie = cookie;
 	list_add(&tnode.llink, lsthead);
 
@@ -364,10 +364,9 @@ static int ep_call_nested(struct nested_calls *ncalls, int max_nests,
 	/* Remove the current task from the list */
 	spin_lock_irqsave(&ncalls->lock, flags);
 	list_del(&tnode.llink);
- out_unlock:
+out_unlock:
 	spin_unlock_irqrestore(&ncalls->lock, flags);
 
-	put_cpu();
 	return error;
 }
 
@@ -408,8 +407,12 @@ static int ep_poll_wakeup_proc(void *priv, void *cookie, int call_nests)
  */
 static void ep_poll_safewake(wait_queue_head_t *wq)
 {
+	int this_cpu = get_cpu();
+
 	ep_call_nested(&poll_safewake_ncalls, EP_MAX_NESTS,
-		       ep_poll_wakeup_proc, NULL, wq);
+		       ep_poll_wakeup_proc, NULL, wq, (void *) (long) this_cpu);
+
+	put_cpu();
 }
 
 /*
@@ -663,7 +666,7 @@ static unsigned int ep_eventpoll_poll(struct file *file, poll_table *wait)
 	 * could re-enter here.
 	 */
 	pollflags = ep_call_nested(&poll_readywalk_ncalls, EP_MAX_NESTS,
-				   ep_poll_readyevents_proc, ep, ep);
+				   ep_poll_readyevents_proc, ep, ep, current);
 
 	return pollflags != -1 ? pollflags : 0;
 }
diff --git a/fs/ext2/dir.c b/fs/ext2/dir.c
index 003500498c2..6cde970b0a1 100644
--- a/fs/ext2/dir.c
+++ b/fs/ext2/dir.c
@@ -450,7 +450,7 @@ ino_t ext2_inode_by_name(struct inode *dir, struct qstr *child)
 
 /* Releases the page */
 void ext2_set_link(struct inode *dir, struct ext2_dir_entry_2 *de,
-			struct page *page, struct inode *inode)
+		   struct page *page, struct inode *inode, int update_times)
 {
 	loff_t pos = page_offset(page) +
 			(char *) de - (char *) page_address(page);
@@ -465,7 +465,8 @@ void ext2_set_link(struct inode *dir, struct ext2_dir_entry_2 *de,
 	ext2_set_de_type(de, inode);
 	err = ext2_commit_chunk(page, pos, len);
 	ext2_put_page(page);
-	dir->i_mtime = dir->i_ctime = CURRENT_TIME_SEC;
+	if (update_times)
+		dir->i_mtime = dir->i_ctime = CURRENT_TIME_SEC;
 	EXT2_I(dir)->i_flags &= ~EXT2_BTREE_FL;
 	mark_inode_dirty(dir);
 }
diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
index f2e5811936d..d988a718aed 100644
--- a/fs/ext2/ext2.h
+++ b/fs/ext2/ext2.h
@@ -111,7 +111,7 @@ extern struct ext2_dir_entry_2 * ext2_find_entry (struct inode *,struct qstr *,
 extern int ext2_delete_entry (struct ext2_dir_entry_2 *, struct page *);
 extern int ext2_empty_dir (struct inode *);
 extern struct ext2_dir_entry_2 * ext2_dotdot (struct inode *, struct page **);
-extern void ext2_set_link(struct inode *, struct ext2_dir_entry_2 *, struct page *, struct inode *);
+extern void ext2_set_link(struct inode *, struct ext2_dir_entry_2 *, struct page *, struct inode *, int);
 
 /* ialloc.c */
 extern struct inode * ext2_new_inode (struct inode *, int);
diff --git a/fs/ext2/namei.c b/fs/ext2/namei.c
index 90ea17998a7..6524ecaebb7 100644
--- a/fs/ext2/namei.c
+++ b/fs/ext2/namei.c
@@ -320,7 +320,7 @@ static int ext2_rename (struct inode * old_dir, struct dentry * old_dentry,
 		if (!new_de)
 			goto out_dir;
 		inode_inc_link_count(old_inode);
-		ext2_set_link(new_dir, new_de, new_page, old_inode);
+		ext2_set_link(new_dir, new_de, new_page, old_inode, 1);
 		new_inode->i_ctime = CURRENT_TIME_SEC;
 		if (dir_de)
 			drop_nlink(new_inode);
@@ -352,7 +352,8 @@ static int ext2_rename (struct inode * old_dir, struct dentry * old_dentry,
 	inode_dec_link_count(old_inode);
 
 	if (dir_de) {
-		ext2_set_link(old_inode, dir_de, dir_page, new_dir);
+		if (old_dir != new_dir)
+			ext2_set_link(old_inode, dir_de, dir_page, new_dir, 0);
 		inode_dec_link_count(old_dir);
 	}
 	return 0;
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index b0248c6d5d4..05dea8132fc 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -820,7 +820,7 @@ int ext3_get_blocks_handle(handle_t *handle, struct inode *inode,
 		while (count < maxblocks && count <= blocks_to_boundary) {
 			ext3_fsblk_t blk;
 
-			if (!verify_chain(chain, partial)) {
+			if (!verify_chain(chain, chain + depth - 1)) {
 				/*
 				 * Indirect block might be removed by
 				 * truncate while we were reading it.
@@ -2374,7 +2374,7 @@ void ext3_truncate(struct inode *inode)
 	struct page *page;
 
 	if (!ext3_can_truncate(inode))
-		return;
+		goto out_notrans;
 
 	if (inode->i_size == 0 && ext3_should_writeback_data(inode))
 		ei->i_state |= EXT3_STATE_FLUSH_ON_CLOSE;
@@ -2390,7 +2390,7 @@ void ext3_truncate(struct inode *inode)
 		page = grab_cache_page(mapping,
 				inode->i_size >> PAGE_CACHE_SHIFT);
 		if (!page)
-			return;
+			goto out_notrans;
 	}
 
 	handle = start_transaction(inode);
@@ -2401,7 +2401,7 @@ void ext3_truncate(struct inode *inode)
 			unlock_page(page);
 			page_cache_release(page);
 		}
-		return;		/* AKPM: return what? */
+		goto out_notrans;
 	}
 
 	last_block = (inode->i_size + blocksize-1)
@@ -2525,6 +2525,14 @@ out_stop:
 		ext3_orphan_del(handle, inode);
 
 	ext3_journal_stop(handle);
+	return;
+out_notrans:
+	/*
+	 * Delete the inode from orphan list so that it doesn't stay there
+	 * forever and trigger assertion on umount.
+	 */
+	if (inode->i_nlink)
+		ext3_orphan_del(NULL, inode);
 }
 
 static ext3_fsblk_t ext3_get_inode_block(struct super_block *sb,
@@ -3122,12 +3130,6 @@ int ext3_setattr(struct dentry *dentry, struct iattr *attr)
 
 	rc = inode_setattr(inode, attr);
 
-	/* If inode_setattr's call to ext3_truncate failed to get a
-	 * transaction handle at all, we need to clean up the in-core
-	 * orphan list manually. */
-	if (inode->i_nlink)
-		ext3_orphan_del(NULL, inode);
-
 	if (!rc && (ia_valid & ATTR_MODE))
 		rc = ext3_acl_chmod(inode);
 
diff --git a/fs/ext3/resize.c b/fs/ext3/resize.c
index 8a0b26340b5..8359e7b3dc8 100644
--- a/fs/ext3/resize.c
+++ b/fs/ext3/resize.c
@@ -990,7 +990,7 @@ int ext3_group_extend(struct super_block *sb, struct ext3_super_block *es,
 			sb->s_id, n_blocks_count);
 		if (sizeof(sector_t) < 8)
 			ext3_warning(sb, __func__,
-			"CONFIG_LBD not enabled\n");
+			"CONFIG_LBDAF not enabled\n");
 		return -EINVAL;
 	}
 
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 26aa64dee6a..601e881e610 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -1812,7 +1812,7 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
 		printk(KERN_ERR "EXT3-fs: filesystem on %s:"
 			" too large to mount safely\n", sb->s_id);
 		if (sizeof(sector_t) < 8)
-			printk(KERN_WARNING "EXT3-fs: CONFIG_LBD not "
+			printk(KERN_WARNING "EXT3-fs: CONFIG_LBDAF not "
 					"enabled\n");
 		goto failed_mount;
 	}
diff --git a/fs/ext4/Makefile b/fs/ext4/Makefile
index 8a34710ecf4..8867b2a1e5f 100644
--- a/fs/ext4/Makefile
+++ b/fs/ext4/Makefile
@@ -6,7 +6,7 @@ obj-$(CONFIG_EXT4_FS) += ext4.o
 
 ext4-y	:= balloc.o bitmap.o dir.o file.o fsync.o ialloc.o inode.o \
 		ioctl.o namei.o super.o symlink.o hash.o resize.o extents.o \
-		ext4_jbd2.o migrate.o mballoc.o block_validity.o
+		ext4_jbd2.o migrate.o mballoc.o block_validity.o move_extent.o
 
 ext4-$(CONFIG_EXT4_FS_XATTR)		+= xattr.o xattr_user.o xattr_trusted.o
 ext4-$(CONFIG_EXT4_FS_POSIX_ACL)	+= acl.o
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index cc7d5edc38c..17b9998680e 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -352,6 +352,7 @@ struct ext4_new_group_data {
  /* note ioctl 10 reserved for an early version of the FIEMAP ioctl */
  /* note ioctl 11 reserved for filesystem-independent FIEMAP ioctl */
 #define EXT4_IOC_ALLOC_DA_BLKS		_IO('f', 12)
+#define EXT4_IOC_MOVE_EXT		_IOWR('f', 15, struct move_extent)
 
 /*
  * ioctl commands in 32 bit emulation
@@ -447,6 +448,15 @@ struct ext4_inode {
 	__le32  i_version_hi;	/* high 32 bits for 64-bit version */
 };
 
+struct move_extent {
+	__u32 reserved;		/* should be zero */
+	__u32 donor_fd;		/* donor file descriptor */
+	__u64 orig_start;	/* logical start offset in block for orig */
+	__u64 donor_start;	/* logical start offset in block for donor */
+	__u64 len;		/* block length to be moved */
+	__u64 moved_len;	/* moved block length */
+};
+#define MAX_DEFRAG_SIZE         ((1UL<<31) - 1)
 
 #define EXT4_EPOCH_BITS 2
 #define EXT4_EPOCH_MASK ((1 << EXT4_EPOCH_BITS) - 1)
@@ -674,7 +684,6 @@ struct ext4_inode_info {
 #define EXT4_MOUNT_ERRORS_PANIC		0x00040	/* Panic on errors */
 #define EXT4_MOUNT_MINIX_DF		0x00080	/* Mimics the Minix statfs */
 #define EXT4_MOUNT_NOLOAD		0x00100	/* Don't use existing journal*/
-#define EXT4_MOUNT_ABORT		0x00200	/* Fatal error detected */
 #define EXT4_MOUNT_DATA_FLAGS		0x00C00	/* Mode for data writes: */
 #define EXT4_MOUNT_JOURNAL_DATA		0x00400	/* Write data to journal */
 #define EXT4_MOUNT_ORDERED_DATA		0x00800	/* Flush data before commit */
@@ -696,17 +705,10 @@ struct ext4_inode_info {
 #define EXT4_MOUNT_DATA_ERR_ABORT	0x10000000 /* Abort on file data write */
 #define EXT4_MOUNT_BLOCK_VALIDITY	0x20000000 /* Block validity checking */
 
-/* Compatibility, for having both ext2_fs.h and ext4_fs.h included at once */
-#ifndef _LINUX_EXT2_FS_H
 #define clear_opt(o, opt)		o &= ~EXT4_MOUNT_##opt
 #define set_opt(o, opt)			o |= EXT4_MOUNT_##opt
 #define test_opt(sb, opt)		(EXT4_SB(sb)->s_mount_opt & \
 					 EXT4_MOUNT_##opt)
-#else
-#define EXT2_MOUNT_NOLOAD		EXT4_MOUNT_NOLOAD
-#define EXT2_MOUNT_ABORT		EXT4_MOUNT_ABORT
-#define EXT2_MOUNT_DATA_FLAGS		EXT4_MOUNT_DATA_FLAGS
-#endif
 
 #define ext4_set_bit			ext2_set_bit
 #define ext4_set_bit_atomic		ext2_set_bit_atomic
@@ -824,6 +826,13 @@ struct ext4_super_block {
 };
 
 #ifdef __KERNEL__
+
+/*
+ * run-time mount flags
+ */
+#define EXT4_MF_MNTDIR_SAMPLED	0x0001
+#define EXT4_MF_FS_ABORTED	0x0002	/* Fatal error detected */
+
 /*
  * fourth extended-fs super-block data in memory
  */
@@ -842,7 +851,8 @@ struct ext4_sb_info {
 	struct buffer_head * s_sbh;	/* Buffer containing the super block */
 	struct ext4_super_block *s_es;	/* Pointer to the super block in the buffer */
 	struct buffer_head **s_group_desc;
-	unsigned long  s_mount_opt;
+	unsigned int s_mount_opt;
+	unsigned int s_mount_flags;
 	ext4_fsblk_t s_sb_block;
 	uid_t s_resuid;
 	gid_t s_resgid;
@@ -853,6 +863,7 @@ struct ext4_sb_info {
 	int s_inode_size;
 	int s_first_ino;
 	unsigned int s_inode_readahead_blks;
+	unsigned int s_inode_goal;
 	spinlock_t s_next_gen_lock;
 	u32 s_next_generation;
 	u32 s_hash_seed[4];
@@ -1305,7 +1316,8 @@ extern int ext4fs_dirhash(const char *name, int len, struct
 			  dx_hash_info *hinfo);
 
 /* ialloc.c */
-extern struct inode * ext4_new_inode(handle_t *, struct inode *, int);
+extern struct inode *ext4_new_inode(handle_t *, struct inode *, int,
+				    const struct qstr *qstr, __u32 goal);
 extern void ext4_free_inode(handle_t *, struct inode *);
 extern struct inode * ext4_orphan_get(struct super_block *, unsigned long);
 extern unsigned long ext4_count_free_inodes(struct super_block *);
@@ -1329,7 +1341,7 @@ extern void ext4_discard_preallocations(struct inode *);
 extern int __init init_ext4_mballoc(void);
 extern void exit_ext4_mballoc(void);
 extern void ext4_mb_free_blocks(handle_t *, struct inode *,
-		unsigned long, unsigned long, int, unsigned long *);
+		ext4_fsblk_t, unsigned long, int, unsigned long *);
 extern int ext4_mb_add_groupinfo(struct super_block *sb,
 		ext4_group_t i, struct ext4_group_desc *desc);
 extern void ext4_mb_update_group_info(struct ext4_group_info *grp,
@@ -1647,6 +1659,11 @@ extern int ext4_get_blocks(handle_t *handle, struct inode *inode,
 			   struct buffer_head *bh, int flags);
 extern int ext4_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
 			__u64 start, __u64 len);
+/* move_extent.c */
+extern int ext4_move_extents(struct file *o_filp, struct file *d_filp,
+			     __u64 start_orig, __u64 start_donor,
+			     __u64 len, __u64 *moved_len);
+
 
 /*
  * Add new method to test wether block and inode bitmaps are properly
diff --git a/fs/ext4/ext4_extents.h b/fs/ext4/ext4_extents.h
index f0c3ec85bd4..20a84105a10 100644
--- a/fs/ext4/ext4_extents.h
+++ b/fs/ext4/ext4_extents.h
@@ -221,12 +221,16 @@ static inline int ext4_ext_get_actual_len(struct ext4_extent *ext)
 }
 
 extern int ext4_ext_calc_metadata_amount(struct inode *inode, int blocks);
+extern ext4_fsblk_t ext_pblock(struct ext4_extent *ex);
 extern ext4_fsblk_t idx_pblock(struct ext4_extent_idx *);
 extern void ext4_ext_store_pblock(struct ext4_extent *, ext4_fsblk_t);
 extern int ext4_extent_tree_init(handle_t *, struct inode *);
 extern int ext4_ext_calc_credits_for_single_extent(struct inode *inode,
 						   int num,
 						   struct ext4_ext_path *path);
+extern int ext4_can_extents_be_merged(struct inode *inode,
+				      struct ext4_extent *ex1,
+				      struct ext4_extent *ex2);
 extern int ext4_ext_try_to_merge(struct inode *inode,
 				 struct ext4_ext_path *path,
 				 struct ext4_extent *);
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 2593f748c3a..50322a09bd0 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -49,7 +49,7 @@
  * ext_pblock:
  * combine low and high parts of physical block number into ext4_fsblk_t
  */
-static ext4_fsblk_t ext_pblock(struct ext4_extent *ex)
+ext4_fsblk_t ext_pblock(struct ext4_extent *ex)
 {
 	ext4_fsblk_t block;
 
@@ -1417,7 +1417,7 @@ static int ext4_ext_correct_indexes(handle_t *handle, struct inode *inode,
 	return err;
 }
 
-static int
+int
 ext4_can_extents_be_merged(struct inode *inode, struct ext4_extent *ex1,
 				struct ext4_extent *ex2)
 {
diff --git a/fs/ext4/file.c b/fs/ext4/file.c
index 588af8c7724..3f1873fef1c 100644
--- a/fs/ext4/file.c
+++ b/fs/ext4/file.c
@@ -21,6 +21,8 @@
 #include <linux/time.h>
 #include <linux/fs.h>
 #include <linux/jbd2.h>
+#include <linux/mount.h>
+#include <linux/path.h>
 #include "ext4.h"
 #include "ext4_jbd2.h"
 #include "xattr.h"
@@ -145,6 +147,38 @@ static int ext4_file_mmap(struct file *file, struct vm_area_struct *vma)
 	return 0;
 }
 
+static int ext4_file_open(struct inode * inode, struct file * filp)
+{
+	struct super_block *sb = inode->i_sb;
+	struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
+	struct vfsmount *mnt = filp->f_path.mnt;
+	struct path path;
+	char buf[64], *cp;
+
+	if (unlikely(!(sbi->s_mount_flags & EXT4_MF_MNTDIR_SAMPLED) &&
+		     !(sb->s_flags & MS_RDONLY))) {
+		sbi->s_mount_flags |= EXT4_MF_MNTDIR_SAMPLED;
+		/*
+		 * Sample where the filesystem has been mounted and
+		 * store it in the superblock for sysadmin convenience
+		 * when trying to sort through large numbers of block
+		 * devices or filesystem images.
+		 */
+		memset(buf, 0, sizeof(buf));
+		path.mnt = mnt->mnt_parent;
+		path.dentry = mnt->mnt_mountpoint;
+		path_get(&path);
+		cp = d_path(&path, buf, sizeof(buf));
+		path_put(&path);
+		if (!IS_ERR(cp)) {
+			memcpy(sbi->s_es->s_last_mounted, cp,
+			       sizeof(sbi->s_es->s_last_mounted));
+			sb->s_dirt = 1;
+		}
+	}
+	return generic_file_open(inode, filp);
+}
+
 const struct file_operations ext4_file_operations = {
 	.llseek		= generic_file_llseek,
 	.read		= do_sync_read,
@@ -156,7 +190,7 @@ const struct file_operations ext4_file_operations = {
 	.compat_ioctl	= ext4_compat_ioctl,
 #endif
 	.mmap		= ext4_file_mmap,
-	.open		= generic_file_open,
+	.open		= ext4_file_open,
 	.release	= ext4_release_file,
 	.fsync		= ext4_sync_file,
 	.splice_read	= generic_file_splice_read,
diff --git a/fs/ext4/fsync.c b/fs/ext4/fsync.c
index 5afe4370840..83cf6415f59 100644
--- a/fs/ext4/fsync.c
+++ b/fs/ext4/fsync.c
@@ -28,10 +28,12 @@
 #include <linux/writeback.h>
 #include <linux/jbd2.h>
 #include <linux/blkdev.h>
-#include <linux/marker.h>
+
 #include "ext4.h"
 #include "ext4_jbd2.h"
 
+#include <trace/events/ext4.h>
+
 /*
  * akpm: A new design for ext4_sync_file().
  *
@@ -52,9 +54,7 @@ int ext4_sync_file(struct file *file, struct dentry *dentry, int datasync)
 
 	J_ASSERT(ext4_journal_current_handle() == NULL);
 
-	trace_mark(ext4_sync_file, "dev %s datasync %d ino %ld parent %ld",
-		   inode->i_sb->s_id, datasync, inode->i_ino,
-		   dentry->d_parent->d_inode->i_ino);
+	trace_ext4_sync_file(file, dentry, datasync);
 
 	/*
 	 * data=writeback:
diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index 3743bd849bc..2f645732e3b 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -23,11 +23,14 @@
 #include <linux/bitops.h>
 #include <linux/blkdev.h>
 #include <asm/byteorder.h>
+
 #include "ext4.h"
 #include "ext4_jbd2.h"
 #include "xattr.h"
 #include "acl.h"
 
+#include <trace/events/ext4.h>
+
 /*
  * ialloc.c contains the inodes allocation and deallocation routines
  */
@@ -208,11 +211,7 @@ void ext4_free_inode(handle_t *handle, struct inode *inode)
 
 	ino = inode->i_ino;
 	ext4_debug("freeing inode %lu\n", ino);
-	trace_mark(ext4_free_inode,
-		   "dev %s ino %lu mode %d uid %lu gid %lu bocks %llu",
-		   sb->s_id, inode->i_ino, inode->i_mode,
-		   (unsigned long) inode->i_uid, (unsigned long) inode->i_gid,
-		   (unsigned long long) inode->i_blocks);
+	trace_ext4_free_inode(inode);
 
 	/*
 	 * Note: we must free any quota before locking the superblock,
@@ -471,7 +470,8 @@ void get_orlov_stats(struct super_block *sb, ext4_group_t g,
  */
 
 static int find_group_orlov(struct super_block *sb, struct inode *parent,
-			    ext4_group_t *group, int mode)
+			    ext4_group_t *group, int mode,
+			    const struct qstr *qstr)
 {
 	ext4_group_t parent_group = EXT4_I(parent)->i_block_group;
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
@@ -486,6 +486,7 @@ static int find_group_orlov(struct super_block *sb, struct inode *parent,
 	struct ext4_group_desc *desc;
 	struct orlov_stats stats;
 	int flex_size = ext4_flex_bg_size(sbi);
+	struct dx_hash_info hinfo;
 
 	ngroups = real_ngroups;
 	if (flex_size > 1) {
@@ -507,7 +508,13 @@ static int find_group_orlov(struct super_block *sb, struct inode *parent,
 		int best_ndir = inodes_per_group;
 		int ret = -1;
 
-		get_random_bytes(&grp, sizeof(grp));
+		if (qstr) {
+			hinfo.hash_version = DX_HASH_HALF_MD4;
+			hinfo.seed = sbi->s_hash_seed;
+			ext4fs_dirhash(qstr->name, qstr->len, &hinfo);
+			grp = hinfo.hash;
+		} else
+			get_random_bytes(&grp, sizeof(grp));
 		parent_group = (unsigned)grp % ngroups;
 		for (i = 0; i < ngroups; i++) {
 			g = (parent_group + i) % ngroups;
@@ -650,7 +657,7 @@ static int find_group_other(struct super_block *sb, struct inode *parent,
 		*group = parent_group + flex_size;
 		if (*group > ngroups)
 			*group = 0;
-		return find_group_orlov(sb, parent, group, mode);
+		return find_group_orlov(sb, parent, group, mode, 0);
 	}
 
 	/*
@@ -791,7 +798,8 @@ err_ret:
  * For other inodes, search forward from the parent directory's block
  * group to find a free inode.
  */
-struct inode *ext4_new_inode(handle_t *handle, struct inode *dir, int mode)
+struct inode *ext4_new_inode(handle_t *handle, struct inode *dir, int mode,
+			     const struct qstr *qstr, __u32 goal)
 {
 	struct super_block *sb;
 	struct buffer_head *inode_bitmap_bh = NULL;
@@ -815,14 +823,23 @@ struct inode *ext4_new_inode(handle_t *handle, struct inode *dir, int mode)
 
 	sb = dir->i_sb;
 	ngroups = ext4_get_groups_count(sb);
-	trace_mark(ext4_request_inode, "dev %s dir %lu mode %d", sb->s_id,
-		   dir->i_ino, mode);
+	trace_ext4_request_inode(dir, mode);
 	inode = new_inode(sb);
 	if (!inode)
 		return ERR_PTR(-ENOMEM);
 	ei = EXT4_I(inode);
 	sbi = EXT4_SB(sb);
 
+	if (!goal)
+		goal = sbi->s_inode_goal;
+
+	if (goal && goal < le32_to_cpu(sbi->s_es->s_inodes_count)) {
+		group = (goal - 1) / EXT4_INODES_PER_GROUP(sb);
+		ino = (goal - 1) % EXT4_INODES_PER_GROUP(sb);
+		ret2 = 0;
+		goto got_group;
+	}
+
 	if (sbi->s_log_groups_per_flex && test_opt(sb, OLDALLOC)) {
 		ret2 = find_group_flex(sb, dir, &group);
 		if (ret2 == -1) {
@@ -841,7 +858,7 @@ struct inode *ext4_new_inode(handle_t *handle, struct inode *dir, int mode)
 		if (test_opt(sb, OLDALLOC))
 			ret2 = find_group_dir(sb, dir, &group);
 		else
-			ret2 = find_group_orlov(sb, dir, &group, mode);
+			ret2 = find_group_orlov(sb, dir, &group, mode, qstr);
 	} else
 		ret2 = find_group_other(sb, dir, &group, mode);
 
@@ -851,7 +868,7 @@ got_group:
 	if (ret2 == -1)
 		goto out;
 
-	for (i = 0; i < ngroups; i++) {
+	for (i = 0; i < ngroups; i++, ino = 0) {
 		err = -EIO;
 
 		gdp = ext4_get_group_desc(sb, group, &group_desc_bh);
@@ -863,8 +880,6 @@ got_group:
 		if (!inode_bitmap_bh)
 			goto fail;
 
-		ino = 0;
-
 repeat_in_this_group:
 		ino = ext4_find_next_zero_bit((unsigned long *)
 					      inode_bitmap_bh->b_data,
@@ -1047,8 +1062,7 @@ got:
 	}
 
 	ext4_debug("allocating inode %lu\n", inode->i_ino);
-	trace_mark(ext4_allocate_inode, "dev %s ino %lu dir %lu mode %d",
-		   sb->s_id, inode->i_ino, dir->i_ino, mode);
+	trace_ext4_allocate_inode(inode, dir, mode);
 	goto really_out;
 fail:
 	ext4_std_error(sb, err);
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 875db944b22..7c17ae275af 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -37,11 +37,14 @@
 #include <linux/namei.h>
 #include <linux/uio.h>
 #include <linux/bio.h>
+
 #include "ext4_jbd2.h"
 #include "xattr.h"
 #include "acl.h"
 #include "ext4_extents.h"
 
+#include <trace/events/ext4.h>
+
 #define MPAGE_DA_EXTENT_TAIL 0x01
 
 static inline int ext4_begin_ordered_truncate(struct inode *inode,
@@ -78,7 +81,7 @@ static int ext4_inode_is_fast_symlink(struct inode *inode)
  * If the handle isn't valid we're not journaling so there's nothing to do.
  */
 int ext4_forget(handle_t *handle, int is_metadata, struct inode *inode,
-			struct buffer_head *bh, ext4_fsblk_t blocknr)
+		struct buffer_head *bh, ext4_fsblk_t blocknr)
 {
 	int err;
 
@@ -90,7 +93,7 @@ int ext4_forget(handle_t *handle, int is_metadata, struct inode *inode,
 	BUFFER_TRACE(bh, "enter");
 
 	jbd_debug(4, "forgetting bh %p: is_metadata = %d, mode %o, "
-		  "data mode %lx\n",
+		  "data mode %x\n",
 		  bh, is_metadata, inode->i_mode,
 		  test_opt(inode->i_sb, DATA_FLAGS));
 
@@ -329,8 +332,8 @@ static inline void add_chain(Indirect *p, struct buffer_head *bh, __le32 *v)
  */
 
 static int ext4_block_to_path(struct inode *inode,
-			ext4_lblk_t i_block,
-			ext4_lblk_t offsets[4], int *boundary)
+			      ext4_lblk_t i_block,
+			      ext4_lblk_t offsets[4], int *boundary)
 {
 	int ptrs = EXT4_ADDR_PER_BLOCK(inode->i_sb);
 	int ptrs_bits = EXT4_ADDR_PER_BLOCK_BITS(inode->i_sb);
@@ -362,9 +365,9 @@ static int ext4_block_to_path(struct inode *inode,
 		final = ptrs;
 	} else {
 		ext4_warning(inode->i_sb, "ext4_block_to_path",
-				"block %lu > max in inode %lu",
-				i_block + direct_blocks +
-				indirect_blocks + double_blocks, inode->i_ino);
+			     "block %lu > max in inode %lu",
+			     i_block + direct_blocks +
+			     indirect_blocks + double_blocks, inode->i_ino);
 	}
 	if (boundary)
 		*boundary = final - 1 - (i_block & (ptrs - 1));
@@ -379,25 +382,25 @@ static int __ext4_check_blockref(const char *function, struct inode *inode,
 
 	while (bref < p+max) {
 		blk = le32_to_cpu(*bref++);
-		if (blk && 
-		    unlikely(!ext4_data_block_valid(EXT4_SB(inode->i_sb), 
+		if (blk &&
+		    unlikely(!ext4_data_block_valid(EXT4_SB(inode->i_sb),
 						    blk, 1))) {
 			ext4_error(inode->i_sb, function,
 				   "invalid block reference %u "
 				   "in inode #%lu", blk, inode->i_ino);
- 			return -EIO;
- 		}
- 	}
- 	return 0;
+			return -EIO;
+		}
+	}
+	return 0;
 }
 
 
 #define ext4_check_indirect_blockref(inode, bh)                         \
-        __ext4_check_blockref(__func__, inode, (__le32 *)(bh)->b_data,  \
+	__ext4_check_blockref(__func__, inode, (__le32 *)(bh)->b_data,  \
 			      EXT4_ADDR_PER_BLOCK((inode)->i_sb))
 
 #define ext4_check_inode_blockref(inode)                                \
-        __ext4_check_blockref(__func__, inode, EXT4_I(inode)->i_data,   \
+	__ext4_check_blockref(__func__, inode, EXT4_I(inode)->i_data,   \
 			      EXT4_NDIR_BLOCKS)
 
 /**
@@ -447,7 +450,7 @@ static Indirect *ext4_get_branch(struct inode *inode, int depth,
 		bh = sb_getblk(sb, le32_to_cpu(p->key));
 		if (unlikely(!bh))
 			goto failure;
-                  
+
 		if (!bh_uptodate_or_lock(bh)) {
 			if (bh_submit_read(bh) < 0) {
 				put_bh(bh);
@@ -459,7 +462,7 @@ static Indirect *ext4_get_branch(struct inode *inode, int depth,
 				goto failure;
 			}
 		}
-		
+
 		add_chain(++p, bh, (__le32 *)bh->b_data + *++offsets);
 		/* Reader: end */
 		if (!p->key)
@@ -552,7 +555,7 @@ static ext4_fsblk_t ext4_find_near(struct inode *inode, Indirect *ind)
  *	returns it.
  */
 static ext4_fsblk_t ext4_find_goal(struct inode *inode, ext4_lblk_t block,
-		Indirect *partial)
+				   Indirect *partial)
 {
 	/*
 	 * XXX need to get goal block from mballoc's data structures
@@ -574,7 +577,7 @@ static ext4_fsblk_t ext4_find_goal(struct inode *inode, ext4_lblk_t block,
  *	direct and indirect blocks.
  */
 static int ext4_blks_to_allocate(Indirect *branch, int k, unsigned int blks,
-		int blocks_to_boundary)
+				 int blocks_to_boundary)
 {
 	unsigned int count = 0;
 
@@ -610,9 +613,9 @@ static int ext4_blks_to_allocate(Indirect *branch, int k, unsigned int blks,
  *		direct blocks
  */
 static int ext4_alloc_blocks(handle_t *handle, struct inode *inode,
-				ext4_lblk_t iblock, ext4_fsblk_t goal,
-				int indirect_blks, int blks,
-				ext4_fsblk_t new_blocks[4], int *err)
+			     ext4_lblk_t iblock, ext4_fsblk_t goal,
+			     int indirect_blks, int blks,
+			     ext4_fsblk_t new_blocks[4], int *err)
 {
 	struct ext4_allocation_request ar;
 	int target, i;
@@ -683,10 +686,10 @@ static int ext4_alloc_blocks(handle_t *handle, struct inode *inode,
 	}
 	if (!*err) {
 		if (target == blks) {
-		/*
-		 * save the new block number
-		 * for the first direct block
-		 */
+			/*
+			 * save the new block number
+			 * for the first direct block
+			 */
 			new_blocks[index] = current_block;
 		}
 		blk_allocated += ar.len;
@@ -728,9 +731,9 @@ failed_out:
  *	as described above and return 0.
  */
 static int ext4_alloc_branch(handle_t *handle, struct inode *inode,
-				ext4_lblk_t iblock, int indirect_blks,
-				int *blks, ext4_fsblk_t goal,
-				ext4_lblk_t *offsets, Indirect *branch)
+			     ext4_lblk_t iblock, int indirect_blks,
+			     int *blks, ext4_fsblk_t goal,
+			     ext4_lblk_t *offsets, Indirect *branch)
 {
 	int blocksize = inode->i_sb->s_blocksize;
 	int i, n = 0;
@@ -777,7 +780,7 @@ static int ext4_alloc_branch(handle_t *handle, struct inode *inode,
 			 * the chain to point to the new allocated
 			 * data blocks numbers
 			 */
-			for (i=1; i < num; i++)
+			for (i = 1; i < num; i++)
 				*(branch[n].p + i) = cpu_to_le32(++current_block);
 		}
 		BUFFER_TRACE(bh, "marking uptodate");
@@ -820,7 +823,8 @@ failed:
  * chain to new block and return 0.
  */
 static int ext4_splice_branch(handle_t *handle, struct inode *inode,
-			ext4_lblk_t block, Indirect *where, int num, int blks)
+			      ext4_lblk_t block, Indirect *where, int num,
+			      int blks)
 {
 	int i;
 	int err = 0;
@@ -852,10 +856,6 @@ static int ext4_splice_branch(handle_t *handle, struct inode *inode,
 	}
 
 	/* We are done with atomic stuff, now do the rest of housekeeping */
-
-	inode->i_ctime = ext4_current_time(inode);
-	ext4_mark_inode_dirty(handle, inode);
-
 	/* had we spliced it onto indirect block? */
 	if (where->bh) {
 		/*
@@ -874,8 +874,8 @@ static int ext4_splice_branch(handle_t *handle, struct inode *inode,
 	} else {
 		/*
 		 * OK, we spliced it into the inode itself on a direct block.
-		 * Inode was dirtied above.
 		 */
+		ext4_mark_inode_dirty(handle, inode);
 		jbd_debug(5, "splicing direct\n");
 	}
 	return err;
@@ -921,9 +921,9 @@ err_out:
  * blocks.
  */
 static int ext4_ind_get_blocks(handle_t *handle, struct inode *inode,
-				  ext4_lblk_t iblock, unsigned int maxblocks,
-				  struct buffer_head *bh_result,
-				  int flags)
+			       ext4_lblk_t iblock, unsigned int maxblocks,
+			       struct buffer_head *bh_result,
+			       int flags)
 {
 	int err = -EIO;
 	ext4_lblk_t offsets[4];
@@ -939,7 +939,7 @@ static int ext4_ind_get_blocks(handle_t *handle, struct inode *inode,
 	J_ASSERT(!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL));
 	J_ASSERT(handle != NULL || (flags & EXT4_GET_BLOCKS_CREATE) == 0);
 	depth = ext4_block_to_path(inode, iblock, offsets,
-					&blocks_to_boundary);
+				   &blocks_to_boundary);
 
 	if (depth == 0)
 		goto out;
@@ -987,8 +987,8 @@ static int ext4_ind_get_blocks(handle_t *handle, struct inode *inode,
 	 * Block out ext4_truncate while we alter the tree
 	 */
 	err = ext4_alloc_branch(handle, inode, iblock, indirect_blks,
-					&count, goal,
-					offsets + (partial - chain), partial);
+				&count, goal,
+				offsets + (partial - chain), partial);
 
 	/*
 	 * The ext4_splice_branch call will free and forget any buffers
@@ -999,8 +999,8 @@ static int ext4_ind_get_blocks(handle_t *handle, struct inode *inode,
 	 */
 	if (!err)
 		err = ext4_splice_branch(handle, inode, iblock,
-					partial, indirect_blks, count);
-	else 
+					 partial, indirect_blks, count);
+	else
 		goto cleanup;
 
 	set_buffer_new(bh_result);
@@ -1172,7 +1172,7 @@ int ext4_get_blocks(handle_t *handle, struct inode *inode, sector_t block,
 	up_read((&EXT4_I(inode)->i_data_sem));
 
 	if (retval > 0 && buffer_mapped(bh)) {
-		int ret = check_block_validity(inode, block, 
+		int ret = check_block_validity(inode, block,
 					       bh->b_blocknr, retval);
 		if (ret != 0)
 			return ret;
@@ -1254,7 +1254,7 @@ int ext4_get_blocks(handle_t *handle, struct inode *inode, sector_t block,
 
 	up_write((&EXT4_I(inode)->i_data_sem));
 	if (retval > 0 && buffer_mapped(bh)) {
-		int ret = check_block_validity(inode, block, 
+		int ret = check_block_validity(inode, block,
 					       bh->b_blocknr, retval);
 		if (ret != 0)
 			return ret;
@@ -1405,8 +1405,7 @@ static int walk_page_buffers(handle_t *handle,
 
 	for (bh = head, block_start = 0;
 	     ret == 0 && (bh != head || !block_start);
-	     block_start = block_end, bh = next)
-	{
+	     block_start = block_end, bh = next) {
 		next = bh->b_this_page;
 		block_end = block_start + blocksize;
 		if (block_end <= from || block_start >= to) {
@@ -1447,7 +1446,7 @@ static int walk_page_buffers(handle_t *handle,
  * write.
  */
 static int do_journal_get_write_access(handle_t *handle,
-					struct buffer_head *bh)
+				       struct buffer_head *bh)
 {
 	if (!buffer_mapped(bh) || buffer_freed(bh))
 		return 0;
@@ -1455,27 +1454,24 @@ static int do_journal_get_write_access(handle_t *handle,
 }
 
 static int ext4_write_begin(struct file *file, struct address_space *mapping,
-				loff_t pos, unsigned len, unsigned flags,
-				struct page **pagep, void **fsdata)
+			    loff_t pos, unsigned len, unsigned flags,
+			    struct page **pagep, void **fsdata)
 {
 	struct inode *inode = mapping->host;
 	int ret, needed_blocks;
 	handle_t *handle;
 	int retries = 0;
 	struct page *page;
- 	pgoff_t index;
+	pgoff_t index;
 	unsigned from, to;
 
-	trace_mark(ext4_write_begin,
-		   "dev %s ino %lu pos %llu len %u flags %u",
-		   inode->i_sb->s_id, inode->i_ino,
-		   (unsigned long long) pos, len, flags);
+	trace_ext4_write_begin(inode, pos, len, flags);
 	/*
 	 * Reserve one block more for addition to orphan list in case
 	 * we allocate blocks but write fails for some reason
 	 */
 	needed_blocks = ext4_writepage_trans_blocks(inode) + 1;
- 	index = pos >> PAGE_CACHE_SHIFT;
+	index = pos >> PAGE_CACHE_SHIFT;
 	from = pos & (PAGE_CACHE_SIZE - 1);
 	to = from + len;
 
@@ -1523,7 +1519,7 @@ retry:
 		ext4_journal_stop(handle);
 		if (pos + len > inode->i_size) {
 			vmtruncate(inode, inode->i_size);
-			/* 
+			/*
 			 * If vmtruncate failed early the inode might
 			 * still be on the orphan list; we need to
 			 * make sure the inode is removed from the
@@ -1550,9 +1546,9 @@ static int write_end_fn(handle_t *handle, struct buffer_head *bh)
 }
 
 static int ext4_generic_write_end(struct file *file,
-				struct address_space *mapping,
-				loff_t pos, unsigned len, unsigned copied,
-				struct page *page, void *fsdata)
+				  struct address_space *mapping,
+				  loff_t pos, unsigned len, unsigned copied,
+				  struct page *page, void *fsdata)
 {
 	int i_size_changed = 0;
 	struct inode *inode = mapping->host;
@@ -1603,18 +1599,15 @@ static int ext4_generic_write_end(struct file *file,
  * buffers are managed internally.
  */
 static int ext4_ordered_write_end(struct file *file,
-				struct address_space *mapping,
-				loff_t pos, unsigned len, unsigned copied,
-				struct page *page, void *fsdata)
+				  struct address_space *mapping,
+				  loff_t pos, unsigned len, unsigned copied,
+				  struct page *page, void *fsdata)
 {
 	handle_t *handle = ext4_journal_current_handle();
 	struct inode *inode = mapping->host;
 	int ret = 0, ret2;
 
-	trace_mark(ext4_ordered_write_end,
-		   "dev %s ino %lu pos %llu len %u copied %u",
-		   inode->i_sb->s_id, inode->i_ino,
-		   (unsigned long long) pos, len, copied);
+	trace_ext4_ordered_write_end(inode, pos, len, copied);
 	ret = ext4_jbd2_file_inode(handle, inode);
 
 	if (ret == 0) {
@@ -1636,7 +1629,7 @@ static int ext4_ordered_write_end(struct file *file,
 
 	if (pos + len > inode->i_size) {
 		vmtruncate(inode, inode->i_size);
-		/* 
+		/*
 		 * If vmtruncate failed early the inode might still be
 		 * on the orphan list; we need to make sure the inode
 		 * is removed from the orphan list in that case.
@@ -1650,18 +1643,15 @@ static int ext4_ordered_write_end(struct file *file,
 }
 
 static int ext4_writeback_write_end(struct file *file,
-				struct address_space *mapping,
-				loff_t pos, unsigned len, unsigned copied,
-				struct page *page, void *fsdata)
+				    struct address_space *mapping,
+				    loff_t pos, unsigned len, unsigned copied,
+				    struct page *page, void *fsdata)
 {
 	handle_t *handle = ext4_journal_current_handle();
 	struct inode *inode = mapping->host;
 	int ret = 0, ret2;
 
-	trace_mark(ext4_writeback_write_end,
-		   "dev %s ino %lu pos %llu len %u copied %u",
-		   inode->i_sb->s_id, inode->i_ino,
-		   (unsigned long long) pos, len, copied);
+	trace_ext4_writeback_write_end(inode, pos, len, copied);
 	ret2 = ext4_generic_write_end(file, mapping, pos, len, copied,
 							page, fsdata);
 	copied = ret2;
@@ -1681,7 +1671,7 @@ static int ext4_writeback_write_end(struct file *file,
 
 	if (pos + len > inode->i_size) {
 		vmtruncate(inode, inode->i_size);
-		/* 
+		/*
 		 * If vmtruncate failed early the inode might still be
 		 * on the orphan list; we need to make sure the inode
 		 * is removed from the orphan list in that case.
@@ -1694,9 +1684,9 @@ static int ext4_writeback_write_end(struct file *file,
 }
 
 static int ext4_journalled_write_end(struct file *file,
-				struct address_space *mapping,
-				loff_t pos, unsigned len, unsigned copied,
-				struct page *page, void *fsdata)
+				     struct address_space *mapping,
+				     loff_t pos, unsigned len, unsigned copied,
+				     struct page *page, void *fsdata)
 {
 	handle_t *handle = ext4_journal_current_handle();
 	struct inode *inode = mapping->host;
@@ -1705,10 +1695,7 @@ static int ext4_journalled_write_end(struct file *file,
 	unsigned from, to;
 	loff_t new_i_size;
 
-	trace_mark(ext4_journalled_write_end,
-		   "dev %s ino %lu pos %llu len %u copied %u",
-		   inode->i_sb->s_id, inode->i_ino,
-		   (unsigned long long) pos, len, copied);
+	trace_ext4_journalled_write_end(inode, pos, len, copied);
 	from = pos & (PAGE_CACHE_SIZE - 1);
 	to = from + len;
 
@@ -1747,7 +1734,7 @@ static int ext4_journalled_write_end(struct file *file,
 		ret = ret2;
 	if (pos + len > inode->i_size) {
 		vmtruncate(inode, inode->i_size);
-		/* 
+		/*
 		 * If vmtruncate failed early the inode might still be
 		 * on the orphan list; we need to make sure the inode
 		 * is removed from the orphan list in that case.
@@ -1854,7 +1841,7 @@ static void ext4_da_release_space(struct inode *inode, int to_free)
 }
 
 static void ext4_da_page_release_reservation(struct page *page,
-						unsigned long offset)
+					     unsigned long offset)
 {
 	int to_release = 0;
 	struct buffer_head *head, *bh;
@@ -2554,9 +2541,7 @@ static int ext4_da_writepage(struct page *page,
 	struct buffer_head *page_bufs;
 	struct inode *inode = page->mapping->host;
 
-	trace_mark(ext4_da_writepage,
-		   "dev %s ino %lu page_index %lu",
-		   inode->i_sb->s_id, inode->i_ino, page->index);
+	trace_ext4_da_writepage(inode, page);
 	size = i_size_read(inode);
 	if (page->index == size >> PAGE_CACHE_SHIFT)
 		len = size & ~PAGE_CACHE_MASK;
@@ -2667,19 +2652,7 @@ static int ext4_da_writepages(struct address_space *mapping,
 	int needed_blocks, ret = 0, nr_to_writebump = 0;
 	struct ext4_sb_info *sbi = EXT4_SB(mapping->host->i_sb);
 
-	trace_mark(ext4_da_writepages,
-		   "dev %s ino %lu nr_t_write %ld "
-		   "pages_skipped %ld range_start %llu "
-		   "range_end %llu nonblocking %d "
-		   "for_kupdate %d for_reclaim %d "
-		   "for_writepages %d range_cyclic %d",
-		   inode->i_sb->s_id, inode->i_ino,
-		   wbc->nr_to_write, wbc->pages_skipped,
-		   (unsigned long long) wbc->range_start,
-		   (unsigned long long) wbc->range_end,
-		   wbc->nonblocking, wbc->for_kupdate,
-		   wbc->for_reclaim, wbc->for_writepages,
-		   wbc->range_cyclic);
+	trace_ext4_da_writepages(inode, wbc);
 
 	/*
 	 * No pages to write? This is mainly a kludge to avoid starting
@@ -2693,13 +2666,13 @@ static int ext4_da_writepages(struct address_space *mapping,
 	 * If the filesystem has aborted, it is read-only, so return
 	 * right away instead of dumping stack traces later on that
 	 * will obscure the real source of the problem.  We test
-	 * EXT4_MOUNT_ABORT instead of sb->s_flag's MS_RDONLY because
+	 * EXT4_MF_FS_ABORTED instead of sb->s_flag's MS_RDONLY because
 	 * the latter could be true if the filesystem is mounted
 	 * read-only, and in that case, ext4_da_writepages should
 	 * *never* be called, so if that ever happens, we would want
 	 * the stack trace.
 	 */
-	if (unlikely(sbi->s_mount_opt & EXT4_MOUNT_ABORT))
+	if (unlikely(sbi->s_mount_flags & EXT4_MF_FS_ABORTED))
 		return -EROFS;
 
 	/*
@@ -2845,14 +2818,7 @@ out_writepages:
 	if (!no_nrwrite_index_update)
 		wbc->no_nrwrite_index_update = 0;
 	wbc->nr_to_write -= nr_to_writebump;
-	trace_mark(ext4_da_writepage_result,
-		   "dev %s ino %lu ret %d pages_written %d "
-		   "pages_skipped %ld congestion %d "
-		   "more_io %d no_nrwrite_index_update %d",
-		   inode->i_sb->s_id, inode->i_ino, ret,
-		   pages_written, wbc->pages_skipped,
-		   wbc->encountered_congestion, wbc->more_io,
-		   wbc->no_nrwrite_index_update);
+	trace_ext4_da_writepages_result(inode, wbc, ret, pages_written);
 	return ret;
 }
 
@@ -2884,8 +2850,8 @@ static int ext4_nonda_switch(struct super_block *sb)
 }
 
 static int ext4_da_write_begin(struct file *file, struct address_space *mapping,
-				loff_t pos, unsigned len, unsigned flags,
-				struct page **pagep, void **fsdata)
+			       loff_t pos, unsigned len, unsigned flags,
+			       struct page **pagep, void **fsdata)
 {
 	int ret, retries = 0;
 	struct page *page;
@@ -2904,11 +2870,7 @@ static int ext4_da_write_begin(struct file *file, struct address_space *mapping,
 					len, flags, pagep, fsdata);
 	}
 	*fsdata = (void *)0;
-
-	trace_mark(ext4_da_write_begin,
-		   "dev %s ino %lu pos %llu len %u flags %u",
-		   inode->i_sb->s_id, inode->i_ino,
-		   (unsigned long long) pos, len, flags);
+	trace_ext4_da_write_begin(inode, pos, len, flags);
 retry:
 	/*
 	 * With delayed allocation, we don't log the i_disksize update
@@ -2959,7 +2921,7 @@ out:
  * when write to the end of file but not require block allocation
  */
 static int ext4_da_should_update_i_disksize(struct page *page,
-					 unsigned long offset)
+					    unsigned long offset)
 {
 	struct buffer_head *bh;
 	struct inode *inode = page->mapping->host;
@@ -2978,9 +2940,9 @@ static int ext4_da_should_update_i_disksize(struct page *page,
 }
 
 static int ext4_da_write_end(struct file *file,
-				struct address_space *mapping,
-				loff_t pos, unsigned len, unsigned copied,
-				struct page *page, void *fsdata)
+			     struct address_space *mapping,
+			     loff_t pos, unsigned len, unsigned copied,
+			     struct page *page, void *fsdata)
 {
 	struct inode *inode = mapping->host;
 	int ret = 0, ret2;
@@ -3001,10 +2963,7 @@ static int ext4_da_write_end(struct file *file,
 		}
 	}
 
-	trace_mark(ext4_da_write_end,
-		   "dev %s ino %lu pos %llu len %u copied %u",
-		   inode->i_sb->s_id, inode->i_ino,
-		   (unsigned long long) pos, len, copied);
+	trace_ext4_da_write_end(inode, pos, len, copied);
 	start = pos & (PAGE_CACHE_SIZE - 1);
 	end = start + copied - 1;
 
@@ -3081,7 +3040,7 @@ int ext4_alloc_da_blocks(struct inode *inode)
 	 * not strictly speaking necessary (and for users of
 	 * laptop_mode, not even desirable).  However, to do otherwise
 	 * would require replicating code paths in:
-	 * 
+	 *
 	 * ext4_da_writepages() ->
 	 *    write_cache_pages() ---> (via passed in callback function)
 	 *        __mpage_da_writepage() -->
@@ -3101,7 +3060,7 @@ int ext4_alloc_da_blocks(struct inode *inode)
 	 * write out the pages, but rather only collect contiguous
 	 * logical block extents, call the multi-block allocator, and
 	 * then update the buffer heads with the block allocations.
-	 * 
+	 *
 	 * For now, though, we'll cheat by calling filemap_flush(),
 	 * which will map the blocks, and start the I/O, but not
 	 * actually wait for the I/O to complete.
@@ -3237,7 +3196,7 @@ static int bput_one(handle_t *handle, struct buffer_head *bh)
  *
  */
 static int __ext4_normal_writepage(struct page *page,
-				struct writeback_control *wbc)
+				   struct writeback_control *wbc)
 {
 	struct inode *inode = page->mapping->host;
 
@@ -3249,15 +3208,13 @@ static int __ext4_normal_writepage(struct page *page,
 }
 
 static int ext4_normal_writepage(struct page *page,
-				struct writeback_control *wbc)
+				 struct writeback_control *wbc)
 {
 	struct inode *inode = page->mapping->host;
 	loff_t size = i_size_read(inode);
 	loff_t len;
 
-	trace_mark(ext4_normal_writepage,
-		   "dev %s ino %lu page_index %lu",
-		   inode->i_sb->s_id, inode->i_ino, page->index);
+	trace_ext4_normal_writepage(inode, page);
 	J_ASSERT(PageLocked(page));
 	if (page->index == size >> PAGE_CACHE_SHIFT)
 		len = size & ~PAGE_CACHE_MASK;
@@ -3287,7 +3244,7 @@ static int ext4_normal_writepage(struct page *page,
 }
 
 static int __ext4_journalled_writepage(struct page *page,
-				struct writeback_control *wbc)
+				       struct writeback_control *wbc)
 {
 	struct address_space *mapping = page->mapping;
 	struct inode *inode = mapping->host;
@@ -3337,15 +3294,13 @@ out:
 }
 
 static int ext4_journalled_writepage(struct page *page,
-				struct writeback_control *wbc)
+				     struct writeback_control *wbc)
 {
 	struct inode *inode = page->mapping->host;
 	loff_t size = i_size_read(inode);
 	loff_t len;
 
-	trace_mark(ext4_journalled_writepage,
-		   "dev %s ino %lu page_index %lu",
-		   inode->i_sb->s_id, inode->i_ino, page->index);
+	trace_ext4_journalled_writepage(inode, page);
 	J_ASSERT(PageLocked(page));
 	if (page->index == size >> PAGE_CACHE_SHIFT)
 		len = size & ~PAGE_CACHE_MASK;
@@ -3442,8 +3397,8 @@ static int ext4_releasepage(struct page *page, gfp_t wait)
  * VFS code falls back into buffered path in that case so we are safe.
  */
 static ssize_t ext4_direct_IO(int rw, struct kiocb *iocb,
-			const struct iovec *iov, loff_t offset,
-			unsigned long nr_segs)
+			      const struct iovec *iov, loff_t offset,
+			      unsigned long nr_segs)
 {
 	struct file *file = iocb->ki_filp;
 	struct inode *inode = file->f_mapping->host;
@@ -3763,7 +3718,8 @@ static inline int all_zeroes(__le32 *p, __le32 *q)
  *			(no partially truncated stuff there).  */
 
 static Indirect *ext4_find_shared(struct inode *inode, int depth,
-			ext4_lblk_t offsets[4], Indirect chain[4], __le32 *top)
+				  ext4_lblk_t offsets[4], Indirect chain[4],
+				  __le32 *top)
 {
 	Indirect *partial, *p;
 	int k, err;
@@ -3819,8 +3775,10 @@ no_top:
  * than `count' because there can be holes in there.
  */
 static void ext4_clear_blocks(handle_t *handle, struct inode *inode,
-		struct buffer_head *bh, ext4_fsblk_t block_to_free,
-		unsigned long count, __le32 *first, __le32 *last)
+			      struct buffer_head *bh,
+			      ext4_fsblk_t block_to_free,
+			      unsigned long count, __le32 *first,
+			      __le32 *last)
 {
 	__le32 *p;
 	if (try_to_extend_transaction(handle, inode)) {
@@ -3837,10 +3795,11 @@ static void ext4_clear_blocks(handle_t *handle, struct inode *inode,
 	}
 
 	/*
-	 * Any buffers which are on the journal will be in memory. We find
-	 * them on the hash table so jbd2_journal_revoke() will run jbd2_journal_forget()
-	 * on them.  We've already detached each block from the file, so
-	 * bforget() in jbd2_journal_forget() should be safe.
+	 * Any buffers which are on the journal will be in memory. We
+	 * find them on the hash table so jbd2_journal_revoke() will
+	 * run jbd2_journal_forget() on them.  We've already detached
+	 * each block from the file, so bforget() in
+	 * jbd2_journal_forget() should be safe.
 	 *
 	 * AKPM: turn on bforget in jbd2_journal_forget()!!!
 	 */
@@ -4212,7 +4171,7 @@ void ext4_truncate(struct inode *inode)
 				   (__le32*)partial->bh->b_data+addr_per_block,
 				   (chain+n-1) - partial);
 		BUFFER_TRACE(partial->bh, "call brelse");
-		brelse (partial->bh);
+		brelse(partial->bh);
 		partial--;
 	}
 do_indirects:
@@ -4453,8 +4412,9 @@ void ext4_get_inode_flags(struct ext4_inode_info *ei)
 	if (flags & S_DIRSYNC)
 		ei->i_flags |= EXT4_DIRSYNC_FL;
 }
+
 static blkcnt_t ext4_inode_blocks(struct ext4_inode *raw_inode,
-					struct ext4_inode_info *ei)
+				  struct ext4_inode_info *ei)
 {
 	blkcnt_t i_blocks ;
 	struct inode *inode = &(ei->vfs_inode);
@@ -4569,7 +4529,7 @@ struct inode *ext4_iget(struct super_block *sb, unsigned long ino)
 					EXT4_GOOD_OLD_INODE_SIZE +
 					ei->i_extra_isize;
 			if (*magic == cpu_to_le32(EXT4_XATTR_MAGIC))
-				 ei->i_state |= EXT4_STATE_XATTR;
+				ei->i_state |= EXT4_STATE_XATTR;
 		}
 	} else
 		ei->i_extra_isize = 0;
@@ -4588,7 +4548,7 @@ struct inode *ext4_iget(struct super_block *sb, unsigned long ino)
 
 	ret = 0;
 	if (ei->i_file_acl &&
-	    ((ei->i_file_acl < 
+	    ((ei->i_file_acl <
 	      (le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block) +
 	       EXT4_SB(sb)->s_gdb_count)) ||
 	     (ei->i_file_acl >= ext4_blocks_count(EXT4_SB(sb)->s_es)))) {
@@ -4603,15 +4563,15 @@ struct inode *ext4_iget(struct super_block *sb, unsigned long ino)
 		     !ext4_inode_is_fast_symlink(inode)))
 			/* Validate extent which is part of inode */
 			ret = ext4_ext_check_inode(inode);
- 	} else if (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
+	} else if (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
 		   (S_ISLNK(inode->i_mode) &&
 		    !ext4_inode_is_fast_symlink(inode))) {
-	 	/* Validate block references which are part of inode */
+		/* Validate block references which are part of inode */
 		ret = ext4_check_inode_blockref(inode);
 	}
 	if (ret) {
- 		brelse(bh);
- 		goto bad_inode;
+		brelse(bh);
+		goto bad_inode;
 	}
 
 	if (S_ISREG(inode->i_mode)) {
@@ -4642,7 +4602,7 @@ struct inode *ext4_iget(struct super_block *sb, unsigned long ino)
 	} else {
 		brelse(bh);
 		ret = -EIO;
-		ext4_error(inode->i_sb, __func__, 
+		ext4_error(inode->i_sb, __func__,
 			   "bogus i_mode (%o) for inode=%lu",
 			   inode->i_mode, inode->i_ino);
 		goto bad_inode;
@@ -4795,8 +4755,9 @@ static int ext4_do_update_inode(handle_t *handle,
 				cpu_to_le32(new_encode_dev(inode->i_rdev));
 			raw_inode->i_block[2] = 0;
 		}
-	} else for (block = 0; block < EXT4_N_BLOCKS; block++)
-		raw_inode->i_block[block] = ei->i_data[block];
+	} else
+		for (block = 0; block < EXT4_N_BLOCKS; block++)
+			raw_inode->i_block[block] = ei->i_data[block];
 
 	raw_inode->i_disk_version = cpu_to_le32(inode->i_version);
 	if (ei->i_extra_isize) {
@@ -5150,7 +5111,7 @@ int ext4_chunk_trans_blocks(struct inode *inode, int nrblocks)
  * Give this, we know that the caller already has write access to iloc->bh.
  */
 int ext4_mark_iloc_dirty(handle_t *handle,
-		struct inode *inode, struct ext4_iloc *iloc)
+			 struct inode *inode, struct ext4_iloc *iloc)
 {
 	int err = 0;
 
diff --git a/fs/ext4/ioctl.c b/fs/ext4/ioctl.c
index 91e75f7a9e7..bb415408fdb 100644
--- a/fs/ext4/ioctl.c
+++ b/fs/ext4/ioctl.c
@@ -14,6 +14,7 @@
 #include <linux/compat.h>
 #include <linux/smp_lock.h>
 #include <linux/mount.h>
+#include <linux/file.h>
 #include <asm/uaccess.h>
 #include "ext4_jbd2.h"
 #include "ext4.h"
@@ -213,6 +214,41 @@ setversion_out:
 
 		return err;
 	}
+
+	case EXT4_IOC_MOVE_EXT: {
+		struct move_extent me;
+		struct file *donor_filp;
+		int err;
+
+		if (copy_from_user(&me,
+			(struct move_extent __user *)arg, sizeof(me)))
+			return -EFAULT;
+
+		donor_filp = fget(me.donor_fd);
+		if (!donor_filp)
+			return -EBADF;
+
+		if (!capable(CAP_DAC_OVERRIDE)) {
+			if ((current->real_cred->fsuid != inode->i_uid) ||
+				!(inode->i_mode & S_IRUSR) ||
+				!(donor_filp->f_dentry->d_inode->i_mode &
+				S_IRUSR)) {
+				fput(donor_filp);
+				return -EACCES;
+			}
+		}
+
+		err = ext4_move_extents(filp, donor_filp, me.orig_start,
+					me.donor_start, me.len, &me.moved_len);
+		fput(donor_filp);
+
+		if (!err)
+			if (copy_to_user((struct move_extent *)arg,
+				&me, sizeof(me)))
+				return -EFAULT;
+		return err;
+	}
+
 	case EXT4_IOC_GROUP_ADD: {
 		struct ext4_new_group_data input;
 		struct super_block *sb = inode->i_sb;
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index ed8482e22c0..519a0a686d9 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -22,6 +22,8 @@
  */
 
 #include "mballoc.h"
+#include <trace/events/ext4.h>
+
 /*
  * MUSTDO:
  *   - test ext4_ext_search_left() and ext4_ext_search_right()
@@ -340,8 +342,6 @@ static void ext4_mb_generate_from_freelist(struct super_block *sb, void *bitmap,
 						ext4_group_t group);
 static void release_blocks_on_commit(journal_t *journal, transaction_t *txn);
 
-
-
 static inline void *mb_correct_addr_and_bit(int *bit, void *addr)
 {
 #if BITS_PER_LONG == 64
@@ -2859,9 +2859,8 @@ static void release_blocks_on_commit(journal_t *journal, transaction_t *txn)
 		discard_block = (ext4_fsblk_t) entry->group * EXT4_BLOCKS_PER_GROUP(sb)
 			+ entry->start_blk
 			+ le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block);
-		trace_mark(ext4_discard_blocks, "dev %s blk %llu count %u",
-			   sb->s_id, (unsigned long long) discard_block,
-			   entry->count);
+		trace_ext4_discard_blocks(sb, (unsigned long long)discard_block,
+					  entry->count);
 		sb_issue_discard(sb, discard_block, entry->count);
 
 		kmem_cache_free(ext4_free_ext_cachep, entry);
@@ -3629,10 +3628,7 @@ ext4_mb_new_inode_pa(struct ext4_allocation_context *ac)
 
 	mb_debug("new inode pa %p: %llu/%u for %u\n", pa,
 			pa->pa_pstart, pa->pa_len, pa->pa_lstart);
-	trace_mark(ext4_mb_new_inode_pa,
-		   "dev %s ino %lu pstart %llu len %u lstart %u",
-		   sb->s_id, ac->ac_inode->i_ino,
-		   pa->pa_pstart, pa->pa_len, pa->pa_lstart);
+	trace_ext4_mb_new_inode_pa(ac, pa);
 
 	ext4_mb_use_inode_pa(ac, pa);
 	atomic_add(pa->pa_free, &EXT4_SB(sb)->s_mb_preallocated);
@@ -3691,9 +3687,8 @@ ext4_mb_new_group_pa(struct ext4_allocation_context *ac)
 	pa->pa_type = MB_GROUP_PA;
 
 	mb_debug("new group pa %p: %llu/%u for %u\n", pa,
-		 pa->pa_pstart, pa->pa_len, pa->pa_lstart);
-	trace_mark(ext4_mb_new_group_pa, "dev %s pstart %llu len %u lstart %u",
-		   sb->s_id, pa->pa_pstart, pa->pa_len, pa->pa_lstart);
+			pa->pa_pstart, pa->pa_len, pa->pa_lstart);
+	trace_ext4_mb_new_group_pa(ac, pa);
 
 	ext4_mb_use_group_pa(ac, pa);
 	atomic_add(pa->pa_free, &EXT4_SB(sb)->s_mb_preallocated);
@@ -3783,10 +3778,8 @@ ext4_mb_release_inode_pa(struct ext4_buddy *e4b, struct buffer_head *bitmap_bh,
 			ext4_mb_store_history(ac);
 		}
 
-		trace_mark(ext4_mb_release_inode_pa,
-			   "dev %s ino %lu block %llu count %u",
-			   sb->s_id, pa->pa_inode->i_ino, grp_blk_start + bit,
-			   next - bit);
+		trace_ext4_mb_release_inode_pa(ac, pa, grp_blk_start + bit,
+					       next - bit);
 		mb_free_blocks(pa->pa_inode, e4b, bit, next - bit);
 		bit = next + 1;
 	}
@@ -3820,8 +3813,7 @@ ext4_mb_release_group_pa(struct ext4_buddy *e4b,
 	if (ac)
 		ac->ac_op = EXT4_MB_HISTORY_DISCARD;
 
-	trace_mark(ext4_mb_release_group_pa, "dev %s pstart %llu len %d",
-		   sb->s_id, pa->pa_pstart, pa->pa_len);
+	trace_ext4_mb_release_group_pa(ac, pa);
 	BUG_ON(pa->pa_deleted == 0);
 	ext4_get_group_no_and_offset(sb, pa->pa_pstart, &group, &bit);
 	BUG_ON(group != e4b->bd_group && pa->pa_len != 0);
@@ -3889,6 +3881,8 @@ ext4_mb_discard_group_preallocations(struct super_block *sb,
 
 	INIT_LIST_HEAD(&list);
 	ac = kmem_cache_alloc(ext4_ac_cachep, GFP_NOFS);
+	if (ac)
+		ac->ac_sb = sb;
 repeat:
 	ext4_lock_group(sb, group);
 	list_for_each_entry_safe(pa, tmp,
@@ -3987,12 +3981,15 @@ void ext4_discard_preallocations(struct inode *inode)
 	}
 
 	mb_debug("discard preallocation for inode %lu\n", inode->i_ino);
-	trace_mark(ext4_discard_preallocations, "dev %s ino %lu", sb->s_id,
-		   inode->i_ino);
+	trace_ext4_discard_preallocations(inode);
 
 	INIT_LIST_HEAD(&list);
 
 	ac = kmem_cache_alloc(ext4_ac_cachep, GFP_NOFS);
+	if (ac) {
+		ac->ac_sb = sb;
+		ac->ac_inode = inode;
+	}
 repeat:
 	/* first, collect all pa's in the inode */
 	spin_lock(&ei->i_prealloc_lock);
@@ -4276,6 +4273,8 @@ ext4_mb_discard_lg_preallocations(struct super_block *sb,
 
 	INIT_LIST_HEAD(&discard_list);
 	ac = kmem_cache_alloc(ext4_ac_cachep, GFP_NOFS);
+	if (ac)
+		ac->ac_sb = sb;
 
 	spin_lock(&lg->lg_prealloc_lock);
 	list_for_each_entry_rcu(pa, &lg->lg_prealloc_list[order],
@@ -4445,8 +4444,7 @@ static int ext4_mb_discard_preallocations(struct super_block *sb, int needed)
 	int ret;
 	int freed = 0;
 
-	trace_mark(ext4_mb_discard_preallocations, "dev %s needed %d",
-		   sb->s_id, needed);
+	trace_ext4_mb_discard_preallocations(sb, needed);
 	for (i = 0; i < ngroups && needed > 0; i++) {
 		ret = ext4_mb_discard_group_preallocations(sb, i, needed);
 		freed += ret;
@@ -4475,17 +4473,7 @@ ext4_fsblk_t ext4_mb_new_blocks(handle_t *handle,
 	sb = ar->inode->i_sb;
 	sbi = EXT4_SB(sb);
 
-	trace_mark(ext4_request_blocks, "dev %s flags %u len %u ino %lu "
-		   "lblk %llu goal %llu lleft %llu lright %llu "
-		   "pleft %llu pright %llu ",
-		   sb->s_id, ar->flags, ar->len,
-		   ar->inode ? ar->inode->i_ino : 0,
-		   (unsigned long long) ar->logical,
-		   (unsigned long long) ar->goal,
-		   (unsigned long long) ar->lleft,
-		   (unsigned long long) ar->lright,
-		   (unsigned long long) ar->pleft,
-		   (unsigned long long) ar->pright);
+	trace_ext4_request_blocks(ar);
 
 	/*
 	 * For delayed allocation, we could skip the ENOSPC and
@@ -4521,7 +4509,10 @@ ext4_fsblk_t ext4_mb_new_blocks(handle_t *handle,
 	}
 
 	ac = kmem_cache_alloc(ext4_ac_cachep, GFP_NOFS);
-	if (!ac) {
+	if (ac) {
+		ac->ac_sb = sb;
+		ac->ac_inode = ar->inode;
+	} else {
 		ar->len = 0;
 		*errp = -ENOMEM;
 		goto out1;
@@ -4594,18 +4585,7 @@ out3:
 						reserv_blks);
 	}
 
-	trace_mark(ext4_allocate_blocks,
-		   "dev %s block %llu flags %u len %u ino %lu "
-		   "logical %llu goal %llu lleft %llu lright %llu "
-		   "pleft %llu pright %llu ",
-		   sb->s_id, (unsigned long long) block,
-		   ar->flags, ar->len, ar->inode ? ar->inode->i_ino : 0,
-		   (unsigned long long) ar->logical,
-		   (unsigned long long) ar->goal,
-		   (unsigned long long) ar->lleft,
-		   (unsigned long long) ar->lright,
-		   (unsigned long long) ar->pleft,
-		   (unsigned long long) ar->pright);
+	trace_ext4_allocate_blocks(ar, (unsigned long long)block);
 
 	return block;
 }
@@ -4709,7 +4689,7 @@ ext4_mb_free_metadata(handle_t *handle, struct ext4_buddy *e4b,
  * Main entry point into mballoc to free blocks
  */
 void ext4_mb_free_blocks(handle_t *handle, struct inode *inode,
-			unsigned long block, unsigned long count,
+			ext4_fsblk_t block, unsigned long count,
 			int metadata, unsigned long *freed)
 {
 	struct buffer_head *bitmap_bh = NULL;
@@ -4735,15 +4715,12 @@ void ext4_mb_free_blocks(handle_t *handle, struct inode *inode,
 	    block + count > ext4_blocks_count(es)) {
 		ext4_error(sb, __func__,
 			    "Freeing blocks not in datazone - "
-			    "block = %lu, count = %lu", block, count);
+			    "block = %llu, count = %lu", block, count);
 		goto error_return;
 	}
 
-	ext4_debug("freeing block %lu\n", block);
-	trace_mark(ext4_free_blocks,
-		   "dev %s block %llu count %lu metadata %d ino %lu",
-		   sb->s_id, (unsigned long long) block, count, metadata,
-		   inode ? inode->i_ino : 0);
+	ext4_debug("freeing block %llu\n", block);
+	trace_ext4_free_blocks(inode, block, count, metadata);
 
 	ac = kmem_cache_alloc(ext4_ac_cachep, GFP_NOFS);
 	if (ac) {
@@ -4784,7 +4761,7 @@ do_more:
 
 		ext4_error(sb, __func__,
 			   "Freeing blocks in system zone - "
-			   "Block = %lu, count = %lu", block, count);
+			   "Block = %llu, count = %lu", block, count);
 		/* err = 0. ext4_std_error should be a no op */
 		goto error_return;
 	}
diff --git a/fs/ext4/mballoc.h b/fs/ext4/mballoc.h
index 75e34f69215..c96bb19f58f 100644
--- a/fs/ext4/mballoc.h
+++ b/fs/ext4/mballoc.h
@@ -19,7 +19,6 @@
 #include <linux/seq_file.h>
 #include <linux/version.h>
 #include <linux/blkdev.h>
-#include <linux/marker.h>
 #include <linux/mutex.h>
 #include "ext4_jbd2.h"
 #include "ext4.h"
diff --git a/fs/ext4/migrate.c b/fs/ext4/migrate.c
index fe64d9f7985..313a50b3974 100644
--- a/fs/ext4/migrate.c
+++ b/fs/ext4/migrate.c
@@ -458,6 +458,7 @@ int ext4_ext_migrate(struct inode *inode)
 	struct inode *tmp_inode = NULL;
 	struct list_blocks_struct lb;
 	unsigned long max_entries;
+	__u32 goal;
 
 	/*
 	 * If the filesystem does not support extents, or the inode
@@ -483,9 +484,10 @@ int ext4_ext_migrate(struct inode *inode)
 		retval = PTR_ERR(handle);
 		return retval;
 	}
-	tmp_inode = ext4_new_inode(handle,
-				inode->i_sb->s_root->d_inode,
-				S_IFREG);
+	goal = (((inode->i_ino - 1) / EXT4_INODES_PER_GROUP(inode->i_sb)) *
+		EXT4_INODES_PER_GROUP(inode->i_sb)) + 1;
+	tmp_inode = ext4_new_inode(handle, inode->i_sb->s_root->d_inode,
+				   S_IFREG, 0, goal);
 	if (IS_ERR(tmp_inode)) {
 		retval = -ENOMEM;
 		ext4_journal_stop(handle);
diff --git a/fs/ext4/move_extent.c b/fs/ext4/move_extent.c
new file mode 100644
index 00000000000..bbf2dd9404d
--- /dev/null
+++ b/fs/ext4/move_extent.c
@@ -0,0 +1,1320 @@
+/*
+ * Copyright (c) 2008,2009 NEC Software Tohoku, Ltd.
+ * Written by Takashi Sato <t-sato@yk.jp.nec.com>
+ *            Akira Fujita <a-fujita@rs.jp.nec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/fs.h>
+#include <linux/quotaops.h>
+#include "ext4_jbd2.h"
+#include "ext4_extents.h"
+#include "ext4.h"
+
+#define get_ext_path(path, inode, block, ret)		\
+	do {								\
+		path = ext4_ext_find_extent(inode, block, path);	\
+		if (IS_ERR(path)) {					\
+			ret = PTR_ERR(path);				\
+			path = NULL;					\
+		}							\
+	} while (0)
+
+/**
+ * copy_extent_status - Copy the extent's initialization status
+ *
+ * @src:	an extent for getting initialize status
+ * @dest:	an extent to be set the status
+ */
+static void
+copy_extent_status(struct ext4_extent *src, struct ext4_extent *dest)
+{
+	if (ext4_ext_is_uninitialized(src))
+		ext4_ext_mark_uninitialized(dest);
+	else
+		dest->ee_len = cpu_to_le16(ext4_ext_get_actual_len(dest));
+}
+
+/**
+ * mext_next_extent - Search for the next extent and set it to "extent"
+ *
+ * @inode:	inode which is searched
+ * @path:	this will obtain data for the next extent
+ * @extent:	pointer to the next extent we have just gotten
+ *
+ * Search the next extent in the array of ext4_ext_path structure (@path)
+ * and set it to ext4_extent structure (@extent). In addition, the member of
+ * @path (->p_ext) also points the next extent. Return 0 on success, 1 if
+ * ext4_ext_path structure refers to the last extent, or a negative error
+ * value on failure.
+ */
+static int
+mext_next_extent(struct inode *inode, struct ext4_ext_path *path,
+		      struct ext4_extent **extent)
+{
+	int ppos, leaf_ppos = path->p_depth;
+
+	ppos = leaf_ppos;
+	if (EXT_LAST_EXTENT(path[ppos].p_hdr) > path[ppos].p_ext) {
+		/* leaf block */
+		*extent = ++path[ppos].p_ext;
+		return 0;
+	}
+
+	while (--ppos >= 0) {
+		if (EXT_LAST_INDEX(path[ppos].p_hdr) >
+		    path[ppos].p_idx) {
+			int cur_ppos = ppos;
+
+			/* index block */
+			path[ppos].p_idx++;
+			path[ppos].p_block = idx_pblock(path[ppos].p_idx);
+			if (path[ppos+1].p_bh)
+				brelse(path[ppos+1].p_bh);
+			path[ppos+1].p_bh =
+				sb_bread(inode->i_sb, path[ppos].p_block);
+			if (!path[ppos+1].p_bh)
+				return -EIO;
+			path[ppos+1].p_hdr =
+				ext_block_hdr(path[ppos+1].p_bh);
+
+			/* Halfway index block */
+			while (++cur_ppos < leaf_ppos) {
+				path[cur_ppos].p_idx =
+					EXT_FIRST_INDEX(path[cur_ppos].p_hdr);
+				path[cur_ppos].p_block =
+					idx_pblock(path[cur_ppos].p_idx);
+				if (path[cur_ppos+1].p_bh)
+					brelse(path[cur_ppos+1].p_bh);
+				path[cur_ppos+1].p_bh = sb_bread(inode->i_sb,
+					path[cur_ppos].p_block);
+				if (!path[cur_ppos+1].p_bh)
+					return -EIO;
+				path[cur_ppos+1].p_hdr =
+					ext_block_hdr(path[cur_ppos+1].p_bh);
+			}
+
+			/* leaf block */
+			path[leaf_ppos].p_ext = *extent =
+				EXT_FIRST_EXTENT(path[leaf_ppos].p_hdr);
+			return 0;
+		}
+	}
+	/* We found the last extent */
+	return 1;
+}
+
+/**
+ * mext_double_down_read - Acquire two inodes' read semaphore
+ *
+ * @orig_inode:		original inode structure
+ * @donor_inode:	donor inode structure
+ * Acquire read semaphore of the two inodes (orig and donor) by i_ino order.
+ */
+static void
+mext_double_down_read(struct inode *orig_inode, struct inode *donor_inode)
+{
+	struct inode *first = orig_inode, *second = donor_inode;
+
+	BUG_ON(orig_inode == NULL || donor_inode == NULL);
+
+	/*
+	 * Use the inode number to provide the stable locking order instead
+	 * of its address, because the C language doesn't guarantee you can
+	 * compare pointers that don't come from the same array.
+	 */
+	if (donor_inode->i_ino < orig_inode->i_ino) {
+		first = donor_inode;
+		second = orig_inode;
+	}
+
+	down_read(&EXT4_I(first)->i_data_sem);
+	down_read(&EXT4_I(second)->i_data_sem);
+}
+
+/**
+ * mext_double_down_write - Acquire two inodes' write semaphore
+ *
+ * @orig_inode:		original inode structure
+ * @donor_inode:	donor inode structure
+ * Acquire write semaphore of the two inodes (orig and donor) by i_ino order.
+ */
+static void
+mext_double_down_write(struct inode *orig_inode, struct inode *donor_inode)
+{
+	struct inode *first = orig_inode, *second = donor_inode;
+
+	BUG_ON(orig_inode == NULL || donor_inode == NULL);
+
+	/*
+	 * Use the inode number to provide the stable locking order instead
+	 * of its address, because the C language doesn't guarantee you can
+	 * compare pointers that don't come from the same array.
+	 */
+	if (donor_inode->i_ino < orig_inode->i_ino) {
+		first = donor_inode;
+		second = orig_inode;
+	}
+
+	down_write(&EXT4_I(first)->i_data_sem);
+	down_write(&EXT4_I(second)->i_data_sem);
+}
+
+/**
+ * mext_double_up_read - Release two inodes' read semaphore
+ *
+ * @orig_inode:		original inode structure to be released its lock first
+ * @donor_inode:	donor inode structure to be released its lock second
+ * Release read semaphore of two inodes (orig and donor).
+ */
+static void
+mext_double_up_read(struct inode *orig_inode, struct inode *donor_inode)
+{
+	BUG_ON(orig_inode == NULL || donor_inode == NULL);
+
+	up_read(&EXT4_I(orig_inode)->i_data_sem);
+	up_read(&EXT4_I(donor_inode)->i_data_sem);
+}
+
+/**
+ * mext_double_up_write - Release two inodes' write semaphore
+ *
+ * @orig_inode:		original inode structure to be released its lock first
+ * @donor_inode:	donor inode structure to be released its lock second
+ * Release write semaphore of two inodes (orig and donor).
+ */
+static void
+mext_double_up_write(struct inode *orig_inode, struct inode *donor_inode)
+{
+	BUG_ON(orig_inode == NULL || donor_inode == NULL);
+
+	up_write(&EXT4_I(orig_inode)->i_data_sem);
+	up_write(&EXT4_I(donor_inode)->i_data_sem);
+}
+
+/**
+ * mext_insert_across_blocks - Insert extents across leaf block
+ *
+ * @handle:		journal handle
+ * @orig_inode:		original inode
+ * @o_start:		first original extent to be changed
+ * @o_end:		last original extent to be changed
+ * @start_ext:		first new extent to be inserted
+ * @new_ext:		middle of new extent to be inserted
+ * @end_ext:		last new extent to be inserted
+ *
+ * Allocate a new leaf block and insert extents into it. Return 0 on success,
+ * or a negative error value on failure.
+ */
+static int
+mext_insert_across_blocks(handle_t *handle, struct inode *orig_inode,
+		struct ext4_extent *o_start, struct ext4_extent *o_end,
+		struct ext4_extent *start_ext, struct ext4_extent *new_ext,
+		struct ext4_extent *end_ext)
+{
+	struct ext4_ext_path *orig_path = NULL;
+	ext4_lblk_t eblock = 0;
+	int new_flag = 0;
+	int end_flag = 0;
+	int err = 0;
+
+	if (start_ext->ee_len && new_ext->ee_len && end_ext->ee_len) {
+		if (o_start == o_end) {
+
+			/*       start_ext   new_ext    end_ext
+			 * donor |---------|-----------|--------|
+			 * orig  |------------------------------|
+			 */
+			end_flag = 1;
+		} else {
+
+			/*       start_ext   new_ext   end_ext
+			 * donor |---------|----------|---------|
+			 * orig  |---------------|--------------|
+			 */
+			o_end->ee_block = end_ext->ee_block;
+			o_end->ee_len = end_ext->ee_len;
+			ext4_ext_store_pblock(o_end, ext_pblock(end_ext));
+		}
+
+		o_start->ee_len = start_ext->ee_len;
+		new_flag = 1;
+
+	} else if (start_ext->ee_len && new_ext->ee_len &&
+		   !end_ext->ee_len && o_start == o_end) {
+
+		/*	 start_ext	new_ext
+		 * donor |--------------|---------------|
+		 * orig  |------------------------------|
+		 */
+		o_start->ee_len = start_ext->ee_len;
+		new_flag = 1;
+
+	} else if (!start_ext->ee_len && new_ext->ee_len &&
+		   end_ext->ee_len && o_start == o_end) {
+
+		/*	  new_ext	end_ext
+		 * donor |--------------|---------------|
+		 * orig  |------------------------------|
+		 */
+		o_end->ee_block = end_ext->ee_block;
+		o_end->ee_len = end_ext->ee_len;
+		ext4_ext_store_pblock(o_end, ext_pblock(end_ext));
+
+		/*
+		 * Set 0 to the extent block if new_ext was
+		 * the first block.
+		 */
+		if (new_ext->ee_block)
+			eblock = le32_to_cpu(new_ext->ee_block);
+
+		new_flag = 1;
+	} else {
+		ext4_debug("ext4 move extent: Unexpected insert case\n");
+		return -EIO;
+	}
+
+	if (new_flag) {
+		get_ext_path(orig_path, orig_inode, eblock, err);
+		if (orig_path == NULL)
+			goto out;
+
+		if (ext4_ext_insert_extent(handle, orig_inode,
+					orig_path, new_ext))
+			goto out;
+	}
+
+	if (end_flag) {
+		get_ext_path(orig_path, orig_inode,
+				      le32_to_cpu(end_ext->ee_block) - 1, err);
+		if (orig_path == NULL)
+			goto out;
+
+		if (ext4_ext_insert_extent(handle, orig_inode,
+					   orig_path, end_ext))
+			goto out;
+	}
+out:
+	if (orig_path) {
+		ext4_ext_drop_refs(orig_path);
+		kfree(orig_path);
+	}
+
+	return err;
+
+}
+
+/**
+ * mext_insert_inside_block - Insert new extent to the extent block
+ *
+ * @o_start:		first original extent to be moved
+ * @o_end:		last original extent to be moved
+ * @start_ext:		first new extent to be inserted
+ * @new_ext:		middle of new extent to be inserted
+ * @end_ext:		last new extent to be inserted
+ * @eh:			extent header of target leaf block
+ * @range_to_move:	used to decide how to insert extent
+ *
+ * Insert extents into the leaf block. The extent (@o_start) is overwritten
+ * by inserted extents.
+ */
+static void
+mext_insert_inside_block(struct ext4_extent *o_start,
+			      struct ext4_extent *o_end,
+			      struct ext4_extent *start_ext,
+			      struct ext4_extent *new_ext,
+			      struct ext4_extent *end_ext,
+			      struct ext4_extent_header *eh,
+			      int range_to_move)
+{
+	int i = 0;
+	unsigned long len;
+
+	/* Move the existing extents */
+	if (range_to_move && o_end < EXT_LAST_EXTENT(eh)) {
+		len = (unsigned long)(EXT_LAST_EXTENT(eh) + 1) -
+			(unsigned long)(o_end + 1);
+		memmove(o_end + 1 + range_to_move, o_end + 1, len);
+	}
+
+	/* Insert start entry */
+	if (start_ext->ee_len)
+		o_start[i++].ee_len = start_ext->ee_len;
+
+	/* Insert new entry */
+	if (new_ext->ee_len) {
+		o_start[i] = *new_ext;
+		ext4_ext_store_pblock(&o_start[i++], ext_pblock(new_ext));
+	}
+
+	/* Insert end entry */
+	if (end_ext->ee_len)
+		o_start[i] = *end_ext;
+
+	/* Increment the total entries counter on the extent block */
+	le16_add_cpu(&eh->eh_entries, range_to_move);
+}
+
+/**
+ * mext_insert_extents - Insert new extent
+ *
+ * @handle:	journal handle
+ * @orig_inode:	original inode
+ * @orig_path:	path indicates first extent to be changed
+ * @o_start:	first original extent to be changed
+ * @o_end:	last original extent to be changed
+ * @start_ext:	first new extent to be inserted
+ * @new_ext:	middle of new extent to be inserted
+ * @end_ext:	last new extent to be inserted
+ *
+ * Call the function to insert extents. If we cannot add more extents into
+ * the leaf block, we call mext_insert_across_blocks() to create a
+ * new leaf block. Otherwise call mext_insert_inside_block(). Return 0
+ * on success, or a negative error value on failure.
+ */
+static int
+mext_insert_extents(handle_t *handle, struct inode *orig_inode,
+			 struct ext4_ext_path *orig_path,
+			 struct ext4_extent *o_start,
+			 struct ext4_extent *o_end,
+			 struct ext4_extent *start_ext,
+			 struct ext4_extent *new_ext,
+			 struct ext4_extent *end_ext)
+{
+	struct  ext4_extent_header *eh;
+	unsigned long need_slots, slots_range;
+	int	range_to_move, depth, ret;
+
+	/*
+	 * The extents need to be inserted
+	 * start_extent + new_extent + end_extent.
+	 */
+	need_slots = (start_ext->ee_len ? 1 : 0) + (end_ext->ee_len ? 1 : 0) +
+		(new_ext->ee_len ? 1 : 0);
+
+	/* The number of slots between start and end */
+	slots_range = ((unsigned long)(o_end + 1) - (unsigned long)o_start + 1)
+		/ sizeof(struct ext4_extent);
+
+	/* Range to move the end of extent */
+	range_to_move = need_slots - slots_range;
+	depth = orig_path->p_depth;
+	orig_path += depth;
+	eh = orig_path->p_hdr;
+
+	if (depth) {
+		/* Register to journal */
+		ret = ext4_journal_get_write_access(handle, orig_path->p_bh);
+		if (ret)
+			return ret;
+	}
+
+	/* Expansion */
+	if (range_to_move > 0 &&
+		(range_to_move > le16_to_cpu(eh->eh_max)
+			- le16_to_cpu(eh->eh_entries))) {
+
+		ret = mext_insert_across_blocks(handle, orig_inode, o_start,
+					o_end, start_ext, new_ext, end_ext);
+		if (ret < 0)
+			return ret;
+	} else
+		mext_insert_inside_block(o_start, o_end, start_ext, new_ext,
+						end_ext, eh, range_to_move);
+
+	if (depth) {
+		ret = ext4_handle_dirty_metadata(handle, orig_inode,
+						 orig_path->p_bh);
+		if (ret)
+			return ret;
+	} else {
+		ret = ext4_mark_inode_dirty(handle, orig_inode);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * mext_leaf_block - Move one leaf extent block into the inode.
+ *
+ * @handle:		journal handle
+ * @orig_inode:		original inode
+ * @orig_path:		path indicates first extent to be changed
+ * @dext:		donor extent
+ * @from:		start offset on the target file
+ *
+ * In order to insert extents into the leaf block, we must divide the extent
+ * in the leaf block into three extents. The one is located to be inserted
+ * extents, and the others are located around it.
+ *
+ * Therefore, this function creates structures to save extents of the leaf
+ * block, and inserts extents by calling mext_insert_extents() with
+ * created extents. Return 0 on success, or a negative error value on failure.
+ */
+static int
+mext_leaf_block(handle_t *handle, struct inode *orig_inode,
+		     struct ext4_ext_path *orig_path, struct ext4_extent *dext,
+		     ext4_lblk_t *from)
+{
+	struct ext4_extent *oext, *o_start, *o_end, *prev_ext;
+	struct ext4_extent new_ext, start_ext, end_ext;
+	ext4_lblk_t new_ext_end;
+	ext4_fsblk_t new_phys_end;
+	int oext_alen, new_ext_alen, end_ext_alen;
+	int depth = ext_depth(orig_inode);
+	int ret;
+
+	o_start = o_end = oext = orig_path[depth].p_ext;
+	oext_alen = ext4_ext_get_actual_len(oext);
+	start_ext.ee_len = end_ext.ee_len = 0;
+
+	new_ext.ee_block = cpu_to_le32(*from);
+	ext4_ext_store_pblock(&new_ext, ext_pblock(dext));
+	new_ext.ee_len = dext->ee_len;
+	new_ext_alen = ext4_ext_get_actual_len(&new_ext);
+	new_ext_end = le32_to_cpu(new_ext.ee_block) + new_ext_alen - 1;
+	new_phys_end = ext_pblock(&new_ext) + new_ext_alen - 1;
+
+	/*
+	 * Case: original extent is first
+	 * oext      |--------|
+	 * new_ext      |--|
+	 * start_ext |--|
+	 */
+	if (le32_to_cpu(oext->ee_block) < le32_to_cpu(new_ext.ee_block) &&
+		le32_to_cpu(new_ext.ee_block) <
+		le32_to_cpu(oext->ee_block) + oext_alen) {
+		start_ext.ee_len = cpu_to_le16(le32_to_cpu(new_ext.ee_block) -
+					       le32_to_cpu(oext->ee_block));
+		copy_extent_status(oext, &start_ext);
+	} else if (oext > EXT_FIRST_EXTENT(orig_path[depth].p_hdr)) {
+		prev_ext = oext - 1;
+		/*
+		 * We can merge new_ext into previous extent,
+		 * if these are contiguous and same extent type.
+		 */
+		if (ext4_can_extents_be_merged(orig_inode, prev_ext,
+					       &new_ext)) {
+			o_start = prev_ext;
+			start_ext.ee_len = cpu_to_le16(
+				ext4_ext_get_actual_len(prev_ext) +
+				new_ext_alen);
+			copy_extent_status(prev_ext, &start_ext);
+			new_ext.ee_len = 0;
+		}
+	}
+
+	/*
+	 * Case: new_ext_end must be less than oext
+	 * oext      |-----------|
+	 * new_ext       |-------|
+	 */
+	BUG_ON(le32_to_cpu(oext->ee_block) + oext_alen - 1 < new_ext_end);
+
+	/*
+	 * Case: new_ext is smaller than original extent
+	 * oext    |---------------|
+	 * new_ext |-----------|
+	 * end_ext             |---|
+	 */
+	if (le32_to_cpu(oext->ee_block) <= new_ext_end &&
+		new_ext_end < le32_to_cpu(oext->ee_block) + oext_alen - 1) {
+		end_ext.ee_len =
+			cpu_to_le16(le32_to_cpu(oext->ee_block) +
+			oext_alen - 1 - new_ext_end);
+		copy_extent_status(oext, &end_ext);
+		end_ext_alen = ext4_ext_get_actual_len(&end_ext);
+		ext4_ext_store_pblock(&end_ext,
+			(ext_pblock(o_end) + oext_alen - end_ext_alen));
+		end_ext.ee_block =
+			cpu_to_le32(le32_to_cpu(o_end->ee_block) +
+			oext_alen - end_ext_alen);
+	}
+
+	ret = mext_insert_extents(handle, orig_inode, orig_path, o_start,
+				o_end, &start_ext, &new_ext, &end_ext);
+	return ret;
+}
+
+/**
+ * mext_calc_swap_extents - Calculate extents for extent swapping.
+ *
+ * @tmp_dext:		the extent that will belong to the original inode
+ * @tmp_oext:		the extent that will belong to the donor inode
+ * @orig_off:		block offset of original inode
+ * @donor_off:		block offset of donor inode
+ * @max_count:		the maximun length of extents
+ */
+static void
+mext_calc_swap_extents(struct ext4_extent *tmp_dext,
+			      struct ext4_extent *tmp_oext,
+			      ext4_lblk_t orig_off, ext4_lblk_t donor_off,
+			      ext4_lblk_t max_count)
+{
+	ext4_lblk_t diff, orig_diff;
+	struct ext4_extent dext_old, oext_old;
+
+	dext_old = *tmp_dext;
+	oext_old = *tmp_oext;
+
+	/* When tmp_dext is too large, pick up the target range. */
+	diff = donor_off - le32_to_cpu(tmp_dext->ee_block);
+
+	ext4_ext_store_pblock(tmp_dext, ext_pblock(tmp_dext) + diff);
+	tmp_dext->ee_block =
+			cpu_to_le32(le32_to_cpu(tmp_dext->ee_block) + diff);
+	tmp_dext->ee_len = cpu_to_le16(le16_to_cpu(tmp_dext->ee_len) - diff);
+
+	if (max_count < ext4_ext_get_actual_len(tmp_dext))
+		tmp_dext->ee_len = cpu_to_le16(max_count);
+
+	orig_diff = orig_off - le32_to_cpu(tmp_oext->ee_block);
+	ext4_ext_store_pblock(tmp_oext, ext_pblock(tmp_oext) + orig_diff);
+
+	/* Adjust extent length if donor extent is larger than orig */
+	if (ext4_ext_get_actual_len(tmp_dext) >
+	    ext4_ext_get_actual_len(tmp_oext) - orig_diff)
+		tmp_dext->ee_len = cpu_to_le16(le16_to_cpu(tmp_oext->ee_len) -
+						orig_diff);
+
+	tmp_oext->ee_len = cpu_to_le16(ext4_ext_get_actual_len(tmp_dext));
+
+	copy_extent_status(&oext_old, tmp_dext);
+	copy_extent_status(&dext_old, tmp_oext);
+}
+
+/**
+ * mext_replace_branches - Replace original extents with new extents
+ *
+ * @handle:		journal handle
+ * @orig_inode:		original inode
+ * @donor_inode:	donor inode
+ * @from:		block offset of orig_inode
+ * @count:		block count to be replaced
+ *
+ * Replace original inode extents and donor inode extents page by page.
+ * We implement this replacement in the following three steps:
+ * 1. Save the block information of original and donor inodes into
+ *    dummy extents.
+ * 2. Change the block information of original inode to point at the
+ *    donor inode blocks.
+ * 3. Change the block information of donor inode to point at the saved
+ *    original inode blocks in the dummy extents.
+ *
+ * Return 0 on success, or a negative error value on failure.
+ */
+static int
+mext_replace_branches(handle_t *handle, struct inode *orig_inode,
+			   struct inode *donor_inode, ext4_lblk_t from,
+			   ext4_lblk_t count)
+{
+	struct ext4_ext_path *orig_path = NULL;
+	struct ext4_ext_path *donor_path = NULL;
+	struct ext4_extent *oext, *dext;
+	struct ext4_extent tmp_dext, tmp_oext;
+	ext4_lblk_t orig_off = from, donor_off = from;
+	int err = 0;
+	int depth;
+	int replaced_count = 0;
+	int dext_alen;
+
+	mext_double_down_write(orig_inode, donor_inode);
+
+	/* Get the original extent for the block "orig_off" */
+	get_ext_path(orig_path, orig_inode, orig_off, err);
+	if (orig_path == NULL)
+		goto out;
+
+	/* Get the donor extent for the head */
+	get_ext_path(donor_path, donor_inode, donor_off, err);
+	if (donor_path == NULL)
+		goto out;
+	depth = ext_depth(orig_inode);
+	oext = orig_path[depth].p_ext;
+	tmp_oext = *oext;
+
+	depth = ext_depth(donor_inode);
+	dext = donor_path[depth].p_ext;
+	tmp_dext = *dext;
+
+	mext_calc_swap_extents(&tmp_dext, &tmp_oext, orig_off,
+				      donor_off, count);
+
+	/* Loop for the donor extents */
+	while (1) {
+		/* The extent for donor must be found. */
+		BUG_ON(!dext || donor_off != le32_to_cpu(tmp_dext.ee_block));
+
+		/* Set donor extent to orig extent */
+		err = mext_leaf_block(handle, orig_inode,
+					   orig_path, &tmp_dext, &orig_off);
+		if (err < 0)
+			goto out;
+
+		/* Set orig extent to donor extent */
+		err = mext_leaf_block(handle, donor_inode,
+					   donor_path, &tmp_oext, &donor_off);
+		if (err < 0)
+			goto out;
+
+		dext_alen = ext4_ext_get_actual_len(&tmp_dext);
+		replaced_count += dext_alen;
+		donor_off += dext_alen;
+		orig_off += dext_alen;
+
+		/* Already moved the expected blocks */
+		if (replaced_count >= count)
+			break;
+
+		if (orig_path)
+			ext4_ext_drop_refs(orig_path);
+		get_ext_path(orig_path, orig_inode, orig_off, err);
+		if (orig_path == NULL)
+			goto out;
+		depth = ext_depth(orig_inode);
+		oext = orig_path[depth].p_ext;
+		if (le32_to_cpu(oext->ee_block) +
+				ext4_ext_get_actual_len(oext) <= orig_off) {
+			err = 0;
+			goto out;
+		}
+		tmp_oext = *oext;
+
+		if (donor_path)
+			ext4_ext_drop_refs(donor_path);
+		get_ext_path(donor_path, donor_inode,
+				      donor_off, err);
+		if (donor_path == NULL)
+			goto out;
+		depth = ext_depth(donor_inode);
+		dext = donor_path[depth].p_ext;
+		if (le32_to_cpu(dext->ee_block) +
+				ext4_ext_get_actual_len(dext) <= donor_off) {
+			err = 0;
+			goto out;
+		}
+		tmp_dext = *dext;
+
+		mext_calc_swap_extents(&tmp_dext, &tmp_oext, orig_off,
+					      donor_off,
+					      count - replaced_count);
+	}
+
+out:
+	if (orig_path) {
+		ext4_ext_drop_refs(orig_path);
+		kfree(orig_path);
+	}
+	if (donor_path) {
+		ext4_ext_drop_refs(donor_path);
+		kfree(donor_path);
+	}
+
+	mext_double_up_write(orig_inode, donor_inode);
+	return err;
+}
+
+/**
+ * move_extent_per_page - Move extent data per page
+ *
+ * @o_filp:			file structure of original file
+ * @donor_inode:		donor inode
+ * @orig_page_offset:		page index on original file
+ * @data_offset_in_page:	block index where data swapping starts
+ * @block_len_in_page:		the number of blocks to be swapped
+ * @uninit:			orig extent is uninitialized or not
+ *
+ * Save the data in original inode blocks and replace original inode extents
+ * with donor inode extents by calling mext_replace_branches().
+ * Finally, write out the saved data in new original inode blocks. Return 0
+ * on success, or a negative error value on failure.
+ */
+static int
+move_extent_par_page(struct file *o_filp, struct inode *donor_inode,
+		  pgoff_t orig_page_offset, int data_offset_in_page,
+		  int block_len_in_page, int uninit)
+{
+	struct inode *orig_inode = o_filp->f_dentry->d_inode;
+	struct address_space *mapping = orig_inode->i_mapping;
+	struct buffer_head *bh;
+	struct page *page = NULL;
+	const struct address_space_operations *a_ops = mapping->a_ops;
+	handle_t *handle;
+	ext4_lblk_t orig_blk_offset;
+	long long offs = orig_page_offset << PAGE_CACHE_SHIFT;
+	unsigned long blocksize = orig_inode->i_sb->s_blocksize;
+	unsigned int w_flags = 0;
+	unsigned int tmp_data_len, data_len;
+	void *fsdata;
+	int ret, i, jblocks;
+	int blocks_per_page = PAGE_CACHE_SIZE >> orig_inode->i_blkbits;
+
+	/*
+	 * It needs twice the amount of ordinary journal buffers because
+	 * inode and donor_inode may change each different metadata blocks.
+	 */
+	jblocks = ext4_writepage_trans_blocks(orig_inode) * 2;
+	handle = ext4_journal_start(orig_inode, jblocks);
+	if (IS_ERR(handle)) {
+		ret = PTR_ERR(handle);
+		return ret;
+	}
+
+	if (segment_eq(get_fs(), KERNEL_DS))
+		w_flags |= AOP_FLAG_UNINTERRUPTIBLE;
+
+	orig_blk_offset = orig_page_offset * blocks_per_page +
+		data_offset_in_page;
+
+	/*
+	 * If orig extent is uninitialized one,
+	 * it's not necessary force the page into memory
+	 * and then force it to be written out again.
+	 * Just swap data blocks between orig and donor.
+	 */
+	if (uninit) {
+		ret = mext_replace_branches(handle, orig_inode,
+						 donor_inode, orig_blk_offset,
+						 block_len_in_page);
+
+		/* Clear the inode cache not to refer to the old data */
+		ext4_ext_invalidate_cache(orig_inode);
+		ext4_ext_invalidate_cache(donor_inode);
+		goto out2;
+	}
+
+	offs = (long long)orig_blk_offset << orig_inode->i_blkbits;
+
+	/* Calculate data_len */
+	if ((orig_blk_offset + block_len_in_page - 1) ==
+	    ((orig_inode->i_size - 1) >> orig_inode->i_blkbits)) {
+		/* Replace the last block */
+		tmp_data_len = orig_inode->i_size & (blocksize - 1);
+		/*
+		 * If data_len equal zero, it shows data_len is multiples of
+		 * blocksize. So we set appropriate value.
+		 */
+		if (tmp_data_len == 0)
+			tmp_data_len = blocksize;
+
+		data_len = tmp_data_len +
+			((block_len_in_page - 1) << orig_inode->i_blkbits);
+	} else {
+		data_len = block_len_in_page << orig_inode->i_blkbits;
+	}
+
+	ret = a_ops->write_begin(o_filp, mapping, offs, data_len, w_flags,
+				 &page, &fsdata);
+	if (unlikely(ret < 0))
+		goto out;
+
+	if (!PageUptodate(page)) {
+		mapping->a_ops->readpage(o_filp, page);
+		lock_page(page);
+	}
+
+	/*
+	 * try_to_release_page() doesn't call releasepage in writeback mode.
+	 * We should care about the order of writing to the same file
+	 * by multiple move extent processes.
+	 * It needs to call wait_on_page_writeback() to wait for the
+	 * writeback of the page.
+	 */
+	if (PageWriteback(page))
+		wait_on_page_writeback(page);
+
+	/* Release old bh and drop refs */
+	try_to_release_page(page, 0);
+
+	ret = mext_replace_branches(handle, orig_inode, donor_inode,
+					 orig_blk_offset, block_len_in_page);
+	if (ret < 0)
+		goto out;
+
+	/* Clear the inode cache not to refer to the old data */
+	ext4_ext_invalidate_cache(orig_inode);
+	ext4_ext_invalidate_cache(donor_inode);
+
+	if (!page_has_buffers(page))
+		create_empty_buffers(page, 1 << orig_inode->i_blkbits, 0);
+
+	bh = page_buffers(page);
+	for (i = 0; i < data_offset_in_page; i++)
+		bh = bh->b_this_page;
+
+	for (i = 0; i < block_len_in_page; i++) {
+		ret = ext4_get_block(orig_inode,
+				(sector_t)(orig_blk_offset + i), bh, 0);
+		if (ret < 0)
+			goto out;
+
+		if (bh->b_this_page != NULL)
+			bh = bh->b_this_page;
+	}
+
+	ret = a_ops->write_end(o_filp, mapping, offs, data_len, data_len,
+			       page, fsdata);
+	page = NULL;
+
+out:
+	if (unlikely(page)) {
+		if (PageLocked(page))
+			unlock_page(page);
+		page_cache_release(page);
+	}
+out2:
+	ext4_journal_stop(handle);
+
+	return ret < 0 ? ret : 0;
+}
+
+/**
+ * mext_check_argumants - Check whether move extent can be done
+ *
+ * @orig_inode:		original inode
+ * @donor_inode:	donor inode
+ * @orig_start:		logical start offset in block for orig
+ * @donor_start:	logical start offset in block for donor
+ * @len:		the number of blocks to be moved
+ * @moved_len:		moved block length
+ *
+ * Check the arguments of ext4_move_extents() whether the files can be
+ * exchanged with each other.
+ * Return 0 on success, or a negative error value on failure.
+ */
+static int
+mext_check_arguments(struct inode *orig_inode,
+			  struct inode *donor_inode, __u64 orig_start,
+			  __u64 donor_start, __u64 *len, __u64 moved_len)
+{
+	/* Regular file check */
+	if (!S_ISREG(orig_inode->i_mode) || !S_ISREG(donor_inode->i_mode)) {
+		ext4_debug("ext4 move extent: The argument files should be "
+			"regular file [ino:orig %lu, donor %lu]\n",
+			orig_inode->i_ino, donor_inode->i_ino);
+		return -EINVAL;
+	}
+
+	/* Ext4 move extent does not support swapfile */
+	if (IS_SWAPFILE(orig_inode) || IS_SWAPFILE(donor_inode)) {
+		ext4_debug("ext4 move extent: The argument files should "
+			"not be swapfile [ino:orig %lu, donor %lu]\n",
+			orig_inode->i_ino, donor_inode->i_ino);
+		return -EINVAL;
+	}
+
+	/* Files should be in the same ext4 FS */
+	if (orig_inode->i_sb != donor_inode->i_sb) {
+		ext4_debug("ext4 move extent: The argument files "
+			"should be in same FS [ino:orig %lu, donor %lu]\n",
+			orig_inode->i_ino, donor_inode->i_ino);
+		return -EINVAL;
+	}
+
+	/* orig and donor should be different file */
+	if (orig_inode->i_ino == donor_inode->i_ino) {
+		ext4_debug("ext4 move extent: The argument files should not "
+			"be same file [ino:orig %lu, donor %lu]\n",
+			orig_inode->i_ino, donor_inode->i_ino);
+		return -EINVAL;
+	}
+
+	/* Ext4 move extent supports only extent based file */
+	if (!(EXT4_I(orig_inode)->i_flags & EXT4_EXTENTS_FL)) {
+		ext4_debug("ext4 move extent: orig file is not extents "
+			"based file [ino:orig %lu]\n", orig_inode->i_ino);
+		return -EOPNOTSUPP;
+	} else if (!(EXT4_I(donor_inode)->i_flags & EXT4_EXTENTS_FL)) {
+		ext4_debug("ext4 move extent: donor file is not extents "
+			"based file [ino:donor %lu]\n", donor_inode->i_ino);
+		return -EOPNOTSUPP;
+	}
+
+	if ((!orig_inode->i_size) || (!donor_inode->i_size)) {
+		ext4_debug("ext4 move extent: File size is 0 byte\n");
+		return -EINVAL;
+	}
+
+	/* Start offset should be same */
+	if (orig_start != donor_start) {
+		ext4_debug("ext4 move extent: orig and donor's start "
+			"offset are not same [ino:orig %lu, donor %lu]\n",
+			orig_inode->i_ino, donor_inode->i_ino);
+		return -EINVAL;
+	}
+
+	if (moved_len) {
+		ext4_debug("ext4 move extent: moved_len should be 0 "
+			"[ino:orig %lu, donor %lu]\n", orig_inode->i_ino,
+			donor_inode->i_ino);
+		return -EINVAL;
+	}
+
+	if ((orig_start > MAX_DEFRAG_SIZE) ||
+	    (donor_start > MAX_DEFRAG_SIZE) ||
+	    (*len > MAX_DEFRAG_SIZE) ||
+	    (orig_start + *len > MAX_DEFRAG_SIZE))  {
+		ext4_debug("ext4 move extent: Can't handle over [%lu] blocks "
+			"[ino:orig %lu, donor %lu]\n", MAX_DEFRAG_SIZE,
+			orig_inode->i_ino, donor_inode->i_ino);
+		return -EINVAL;
+	}
+
+	if (orig_inode->i_size > donor_inode->i_size) {
+		if (orig_start >= donor_inode->i_size) {
+			ext4_debug("ext4 move extent: orig start offset "
+			"[%llu] should be less than donor file size "
+			"[%lld] [ino:orig %lu, donor_inode %lu]\n",
+			orig_start, donor_inode->i_size,
+			orig_inode->i_ino, donor_inode->i_ino);
+			return -EINVAL;
+		}
+
+		if (orig_start + *len > donor_inode->i_size) {
+			ext4_debug("ext4 move extent: End offset [%llu] should "
+				"be less than donor file size [%lld]."
+				"So adjust length from %llu to %lld "
+				"[ino:orig %lu, donor %lu]\n",
+				orig_start + *len, donor_inode->i_size,
+				*len, donor_inode->i_size - orig_start,
+				orig_inode->i_ino, donor_inode->i_ino);
+			*len = donor_inode->i_size - orig_start;
+		}
+	} else {
+		if (orig_start >= orig_inode->i_size) {
+			ext4_debug("ext4 move extent: start offset [%llu] "
+				"should be less than original file size "
+				"[%lld] [inode:orig %lu, donor %lu]\n",
+				 orig_start, orig_inode->i_size,
+				orig_inode->i_ino, donor_inode->i_ino);
+			return -EINVAL;
+		}
+
+		if (orig_start + *len > orig_inode->i_size) {
+			ext4_debug("ext4 move extent: Adjust length "
+				"from %llu to %lld. Because it should be "
+				"less than original file size "
+				"[ino:orig %lu, donor %lu]\n",
+				*len, orig_inode->i_size - orig_start,
+				orig_inode->i_ino, donor_inode->i_ino);
+			*len = orig_inode->i_size - orig_start;
+		}
+	}
+
+	if (!*len) {
+		ext4_debug("ext4 move extent: len shoudld not be 0 "
+			"[ino:orig %lu, donor %lu]\n", orig_inode->i_ino,
+			donor_inode->i_ino);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * mext_inode_double_lock - Lock i_mutex on both @inode1 and @inode2
+ *
+ * @inode1:	the inode structure
+ * @inode2:	the inode structure
+ *
+ * Lock two inodes' i_mutex by i_ino order. This function is moved from
+ * fs/inode.c.
+ */
+static void
+mext_inode_double_lock(struct inode *inode1, struct inode *inode2)
+{
+	if (inode1 == NULL || inode2 == NULL || inode1 == inode2) {
+		if (inode1)
+			mutex_lock(&inode1->i_mutex);
+		else if (inode2)
+			mutex_lock(&inode2->i_mutex);
+		return;
+	}
+
+	if (inode1->i_ino < inode2->i_ino) {
+		mutex_lock_nested(&inode1->i_mutex, I_MUTEX_PARENT);
+		mutex_lock_nested(&inode2->i_mutex, I_MUTEX_CHILD);
+	} else {
+		mutex_lock_nested(&inode2->i_mutex, I_MUTEX_PARENT);
+		mutex_lock_nested(&inode1->i_mutex, I_MUTEX_CHILD);
+	}
+}
+
+/**
+ * mext_inode_double_unlock - Release i_mutex on both @inode1 and @inode2
+ *
+ * @inode1:     the inode that is released first
+ * @inode2:     the inode that is released second
+ *
+ * This function is moved from fs/inode.c.
+ */
+
+static void
+mext_inode_double_unlock(struct inode *inode1, struct inode *inode2)
+{
+	if (inode1)
+		mutex_unlock(&inode1->i_mutex);
+
+	if (inode2 && inode2 != inode1)
+		mutex_unlock(&inode2->i_mutex);
+}
+
+/**
+ * ext4_move_extents - Exchange the specified range of a file
+ *
+ * @o_filp:		file structure of the original file
+ * @d_filp:		file structure of the donor file
+ * @orig_start:		start offset in block for orig
+ * @donor_start:	start offset in block for donor
+ * @len:		the number of blocks to be moved
+ * @moved_len:		moved block length
+ *
+ * This function returns 0 and moved block length is set in moved_len
+ * if succeed, otherwise returns error value.
+ *
+ * Note: ext4_move_extents() proceeds the following order.
+ * 1:ext4_move_extents() calculates the last block number of moving extent
+ *   function by the start block number (orig_start) and the number of blocks
+ *   to be moved (len) specified as arguments.
+ *   If the {orig, donor}_start points a hole, the extent's start offset
+ *   pointed by ext_cur (current extent), holecheck_path, orig_path are set
+ *   after hole behind.
+ * 2:Continue step 3 to step 5, until the holecheck_path points to last_extent
+ *   or the ext_cur exceeds the block_end which is last logical block number.
+ * 3:To get the length of continues area, call mext_next_extent()
+ *   specified with the ext_cur (initial value is holecheck_path) re-cursive,
+ *   until find un-continuous extent, the start logical block number exceeds
+ *   the block_end or the extent points to the last extent.
+ * 4:Exchange the original inode data with donor inode data
+ *   from orig_page_offset to seq_end_page.
+ *   The start indexes of data are specified as arguments.
+ *   That of the original inode is orig_page_offset,
+ *   and the donor inode is also orig_page_offset
+ *   (To easily handle blocksize != pagesize case, the offset for the
+ *   donor inode is block unit).
+ * 5:Update holecheck_path and orig_path to points a next proceeding extent,
+ *   then returns to step 2.
+ * 6:Release holecheck_path, orig_path and set the len to moved_len
+ *   which shows the number of moved blocks.
+ *   The moved_len is useful for the command to calculate the file offset
+ *   for starting next move extent ioctl.
+ * 7:Return 0 on success, or a negative error value on failure.
+ */
+int
+ext4_move_extents(struct file *o_filp, struct file *d_filp,
+		 __u64 orig_start, __u64 donor_start, __u64 len,
+		 __u64 *moved_len)
+{
+	struct inode *orig_inode = o_filp->f_dentry->d_inode;
+	struct inode *donor_inode = d_filp->f_dentry->d_inode;
+	struct ext4_ext_path *orig_path = NULL, *holecheck_path = NULL;
+	struct ext4_extent *ext_prev, *ext_cur, *ext_dummy;
+	ext4_lblk_t block_start = orig_start;
+	ext4_lblk_t block_end, seq_start, add_blocks, file_end, seq_blocks = 0;
+	ext4_lblk_t rest_blocks;
+	pgoff_t orig_page_offset = 0, seq_end_page;
+	int ret, depth, last_extent = 0;
+	int blocks_per_page = PAGE_CACHE_SIZE >> orig_inode->i_blkbits;
+	int data_offset_in_page;
+	int block_len_in_page;
+	int uninit;
+
+	/* protect orig and donor against a truncate */
+	mext_inode_double_lock(orig_inode, donor_inode);
+
+	mext_double_down_read(orig_inode, donor_inode);
+	/* Check the filesystem environment whether move_extent can be done */
+	ret = mext_check_arguments(orig_inode, donor_inode, orig_start,
+					donor_start, &len, *moved_len);
+	mext_double_up_read(orig_inode, donor_inode);
+	if (ret)
+		goto out2;
+
+	file_end = (i_size_read(orig_inode) - 1) >> orig_inode->i_blkbits;
+	block_end = block_start + len - 1;
+	if (file_end < block_end)
+		len -= block_end - file_end;
+
+	get_ext_path(orig_path, orig_inode, block_start, ret);
+	if (orig_path == NULL)
+		goto out2;
+
+	/* Get path structure to check the hole */
+	get_ext_path(holecheck_path, orig_inode, block_start, ret);
+	if (holecheck_path == NULL)
+		goto out;
+
+	depth = ext_depth(orig_inode);
+	ext_cur = holecheck_path[depth].p_ext;
+	if (ext_cur == NULL) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/*
+	 * Get proper extent whose ee_block is beyond block_start
+	 * if block_start was within the hole.
+	 */
+	if (le32_to_cpu(ext_cur->ee_block) +
+		ext4_ext_get_actual_len(ext_cur) - 1 < block_start) {
+		last_extent = mext_next_extent(orig_inode,
+					holecheck_path, &ext_cur);
+		if (last_extent < 0) {
+			ret = last_extent;
+			goto out;
+		}
+		last_extent = mext_next_extent(orig_inode, orig_path,
+							&ext_dummy);
+		if (last_extent < 0) {
+			ret = last_extent;
+			goto out;
+		}
+	}
+	seq_start = block_start;
+
+	/* No blocks within the specified range. */
+	if (le32_to_cpu(ext_cur->ee_block) > block_end) {
+		ext4_debug("ext4 move extent: The specified range of file "
+							"may be the hole\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* Adjust start blocks */
+	add_blocks = min(le32_to_cpu(ext_cur->ee_block) +
+			 ext4_ext_get_actual_len(ext_cur), block_end + 1) -
+		     max(le32_to_cpu(ext_cur->ee_block), block_start);
+
+	while (!last_extent && le32_to_cpu(ext_cur->ee_block) <= block_end) {
+		seq_blocks += add_blocks;
+
+		/* Adjust tail blocks */
+		if (seq_start + seq_blocks - 1 > block_end)
+			seq_blocks = block_end - seq_start + 1;
+
+		ext_prev = ext_cur;
+		last_extent = mext_next_extent(orig_inode, holecheck_path,
+						&ext_cur);
+		if (last_extent < 0) {
+			ret = last_extent;
+			break;
+		}
+		add_blocks = ext4_ext_get_actual_len(ext_cur);
+
+		/*
+		 * Extend the length of contiguous block (seq_blocks)
+		 * if extents are contiguous.
+		 */
+		if (ext4_can_extents_be_merged(orig_inode,
+					       ext_prev, ext_cur) &&
+		    block_end >= le32_to_cpu(ext_cur->ee_block) &&
+		    !last_extent)
+			continue;
+
+		/* Is original extent is uninitialized */
+		uninit = ext4_ext_is_uninitialized(ext_prev);
+
+		data_offset_in_page = seq_start % blocks_per_page;
+
+		/*
+		 * Calculate data blocks count that should be swapped
+		 * at the first page.
+		 */
+		if (data_offset_in_page + seq_blocks > blocks_per_page) {
+			/* Swapped blocks are across pages */
+			block_len_in_page =
+					blocks_per_page - data_offset_in_page;
+		} else {
+			/* Swapped blocks are in a page */
+			block_len_in_page = seq_blocks;
+		}
+
+		orig_page_offset = seq_start >>
+				(PAGE_CACHE_SHIFT - orig_inode->i_blkbits);
+		seq_end_page = (seq_start + seq_blocks - 1) >>
+				(PAGE_CACHE_SHIFT - orig_inode->i_blkbits);
+		seq_start = le32_to_cpu(ext_cur->ee_block);
+		rest_blocks = seq_blocks;
+
+		/* Discard preallocations of two inodes */
+		down_write(&EXT4_I(orig_inode)->i_data_sem);
+		ext4_discard_preallocations(orig_inode);
+		up_write(&EXT4_I(orig_inode)->i_data_sem);
+
+		down_write(&EXT4_I(donor_inode)->i_data_sem);
+		ext4_discard_preallocations(donor_inode);
+		up_write(&EXT4_I(donor_inode)->i_data_sem);
+
+		while (orig_page_offset <= seq_end_page) {
+
+			/* Swap original branches with new branches */
+			ret = move_extent_par_page(o_filp, donor_inode,
+						orig_page_offset,
+						data_offset_in_page,
+						block_len_in_page, uninit);
+			if (ret < 0)
+				goto out;
+			orig_page_offset++;
+			/* Count how many blocks we have exchanged */
+			*moved_len += block_len_in_page;
+			BUG_ON(*moved_len > len);
+
+			data_offset_in_page = 0;
+			rest_blocks -= block_len_in_page;
+			if (rest_blocks > blocks_per_page)
+				block_len_in_page = blocks_per_page;
+			else
+				block_len_in_page = rest_blocks;
+		}
+
+		/* Decrease buffer counter */
+		if (holecheck_path)
+			ext4_ext_drop_refs(holecheck_path);
+		get_ext_path(holecheck_path, orig_inode,
+				      seq_start, ret);
+		if (holecheck_path == NULL)
+			break;
+		depth = holecheck_path->p_depth;
+
+		/* Decrease buffer counter */
+		if (orig_path)
+			ext4_ext_drop_refs(orig_path);
+		get_ext_path(orig_path, orig_inode, seq_start, ret);
+		if (orig_path == NULL)
+			break;
+
+		ext_cur = holecheck_path[depth].p_ext;
+		add_blocks = ext4_ext_get_actual_len(ext_cur);
+		seq_blocks = 0;
+
+	}
+out:
+	if (orig_path) {
+		ext4_ext_drop_refs(orig_path);
+		kfree(orig_path);
+	}
+	if (holecheck_path) {
+		ext4_ext_drop_refs(holecheck_path);
+		kfree(holecheck_path);
+	}
+out2:
+	mext_inode_double_unlock(orig_inode, donor_inode);
+
+	if (ret)
+		return ret;
+
+	/* All of the specified blocks must be exchanged in succeed */
+	BUG_ON(*moved_len != len);
+
+	return 0;
+}
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index 07eb6649e4f..de04013d16f 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -1782,7 +1782,7 @@ retry:
 	if (IS_DIRSYNC(dir))
 		ext4_handle_sync(handle);
 
-	inode = ext4_new_inode (handle, dir, mode);
+	inode = ext4_new_inode(handle, dir, mode, &dentry->d_name, 0);
 	err = PTR_ERR(inode);
 	if (!IS_ERR(inode)) {
 		inode->i_op = &ext4_file_inode_operations;
@@ -1816,7 +1816,7 @@ retry:
 	if (IS_DIRSYNC(dir))
 		ext4_handle_sync(handle);
 
-	inode = ext4_new_inode(handle, dir, mode);
+	inode = ext4_new_inode(handle, dir, mode, &dentry->d_name, 0);
 	err = PTR_ERR(inode);
 	if (!IS_ERR(inode)) {
 		init_special_inode(inode, inode->i_mode, rdev);
@@ -1853,7 +1853,8 @@ retry:
 	if (IS_DIRSYNC(dir))
 		ext4_handle_sync(handle);
 
-	inode = ext4_new_inode(handle, dir, S_IFDIR | mode);
+	inode = ext4_new_inode(handle, dir, S_IFDIR | mode,
+			       &dentry->d_name, 0);
 	err = PTR_ERR(inode);
 	if (IS_ERR(inode))
 		goto out_stop;
@@ -2264,7 +2265,8 @@ retry:
 	if (IS_DIRSYNC(dir))
 		ext4_handle_sync(handle);
 
-	inode = ext4_new_inode(handle, dir, S_IFLNK|S_IRWXUGO);
+	inode = ext4_new_inode(handle, dir, S_IFLNK|S_IRWXUGO,
+			       &dentry->d_name, 0);
 	err = PTR_ERR(inode);
 	if (IS_ERR(inode))
 		goto out_stop;
diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c
index 27eb289eea3..68b0351fc64 100644
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -1002,7 +1002,7 @@ int ext4_group_extend(struct super_block *sb, struct ext4_super_block *es,
 			" too large to resize to %llu blocks safely\n",
 			sb->s_id, n_blocks_count);
 		if (sizeof(sector_t) < 8)
-			ext4_warning(sb, __func__, "CONFIG_LBD not enabled");
+			ext4_warning(sb, __func__, "CONFIG_LBDAF not enabled");
 		return -EINVAL;
 	}
 
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 012c4251397..8bb9e2d3e4b 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -37,7 +37,6 @@
 #include <linux/seq_file.h>
 #include <linux/proc_fs.h>
 #include <linux/ctype.h>
-#include <linux/marker.h>
 #include <linux/log2.h>
 #include <linux/crc16.h>
 #include <asm/uaccess.h>
@@ -47,6 +46,9 @@
 #include "xattr.h"
 #include "acl.h"
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/ext4.h>
+
 static int default_mb_history_length = 1000;
 
 module_param_named(default_mb_history_length, default_mb_history_length,
@@ -301,7 +303,7 @@ static void ext4_handle_error(struct super_block *sb)
 	if (!test_opt(sb, ERRORS_CONT)) {
 		journal_t *journal = EXT4_SB(sb)->s_journal;
 
-		EXT4_SB(sb)->s_mount_opt |= EXT4_MOUNT_ABORT;
+		EXT4_SB(sb)->s_mount_flags |= EXT4_MF_FS_ABORTED;
 		if (journal)
 			jbd2_journal_abort(journal, -EIO);
 	}
@@ -414,7 +416,7 @@ void ext4_abort(struct super_block *sb, const char *function,
 	ext4_msg(sb, KERN_CRIT, "Remounting filesystem read-only");
 	EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
 	sb->s_flags |= MS_RDONLY;
-	EXT4_SB(sb)->s_mount_opt |= EXT4_MOUNT_ABORT;
+	EXT4_SB(sb)->s_mount_flags |= EXT4_MF_FS_ABORTED;
 	if (EXT4_SB(sb)->s_journal)
 		jbd2_journal_abort(EXT4_SB(sb)->s_journal, -EIO);
 }
@@ -1474,7 +1476,7 @@ set_qf_format:
 			break;
 #endif
 		case Opt_abort:
-			set_opt(sbi->s_mount_opt, ABORT);
+			sbi->s_mount_flags |= EXT4_MF_FS_ABORTED;
 			break;
 		case Opt_nobarrier:
 			clear_opt(sbi->s_mount_opt, BARRIER);
@@ -1653,7 +1655,7 @@ static int ext4_setup_super(struct super_block *sb, struct ext4_super_block *es,
 	ext4_commit_super(sb, 1);
 	if (test_opt(sb, DEBUG))
 		printk(KERN_INFO "[EXT4 FS bs=%lu, gc=%u, "
-				"bpg=%lu, ipg=%lu, mo=%04lx]\n",
+				"bpg=%lu, ipg=%lu, mo=%04x]\n",
 			sb->s_blocksize,
 			sbi->s_groups_count,
 			EXT4_BLOCKS_PER_GROUP(sb),
@@ -1957,7 +1959,7 @@ static loff_t ext4_max_size(int blkbits, int has_huge_files)
 	/* small i_blocks in vfs inode? */
 	if (!has_huge_files || sizeof(blkcnt_t) < sizeof(u64)) {
 		/*
-		 * CONFIG_LBD is not enabled implies the inode
+		 * CONFIG_LBDAF is not enabled implies the inode
 		 * i_block represent total blocks in 512 bytes
 		 * 32 == size of vfs inode i_blocks * 8
 		 */
@@ -2000,7 +2002,7 @@ static loff_t ext4_max_bitmap_size(int bits, int has_huge_files)
 
 	if (!has_huge_files || sizeof(blkcnt_t) < sizeof(u64)) {
 		/*
-		 * !has_huge_files or CONFIG_LBD not enabled implies that
+		 * !has_huge_files or CONFIG_LBDAF not enabled implies that
 		 * the inode i_block field represents total file blocks in
 		 * 2^32 512-byte sectors == size of vfs inode i_blocks * 8
 		 */
@@ -2204,6 +2206,7 @@ EXT4_RO_ATTR(session_write_kbytes);
 EXT4_RO_ATTR(lifetime_write_kbytes);
 EXT4_ATTR_OFFSET(inode_readahead_blks, 0644, sbi_ui_show,
 		 inode_readahead_blks_store, s_inode_readahead_blks);
+EXT4_RW_ATTR_SBI_UI(inode_goal, s_inode_goal);
 EXT4_RW_ATTR_SBI_UI(mb_stats, s_mb_stats);
 EXT4_RW_ATTR_SBI_UI(mb_max_to_scan, s_mb_max_to_scan);
 EXT4_RW_ATTR_SBI_UI(mb_min_to_scan, s_mb_min_to_scan);
@@ -2216,6 +2219,7 @@ static struct attribute *ext4_attrs[] = {
 	ATTR_LIST(session_write_kbytes),
 	ATTR_LIST(lifetime_write_kbytes),
 	ATTR_LIST(inode_readahead_blks),
+	ATTR_LIST(inode_goal),
 	ATTR_LIST(mb_stats),
 	ATTR_LIST(mb_max_to_scan),
 	ATTR_LIST(mb_min_to_scan),
@@ -2436,13 +2440,13 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	if (has_huge_files) {
 		/*
 		 * Large file size enabled file system can only be
-		 * mount if kernel is build with CONFIG_LBD
+		 * mount if kernel is build with CONFIG_LBDAF
 		 */
 		if (sizeof(root->i_blocks) < sizeof(u64) &&
 				!(sb->s_flags & MS_RDONLY)) {
 			ext4_msg(sb, KERN_ERR, "Filesystem with huge "
 					"files cannot be mounted read-write "
-					"without CONFIG_LBD");
+					"without CONFIG_LBDAF");
 			goto failed_mount;
 		}
 	}
@@ -2566,7 +2570,7 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 		ext4_msg(sb, KERN_ERR, "filesystem"
 			" too large to mount safely");
 		if (sizeof(sector_t) < 8)
-			ext4_msg(sb, KERN_WARNING, "CONFIG_LBD not enabled");
+			ext4_msg(sb, KERN_WARNING, "CONFIG_LBDAF not enabled");
 		goto failed_mount;
 	}
 
@@ -3346,7 +3350,7 @@ static int ext4_sync_fs(struct super_block *sb, int wait)
 	int ret = 0;
 	tid_t target;
 
-	trace_mark(ext4_sync_fs, "dev %s wait %d", sb->s_id, wait);
+	trace_ext4_sync_fs(sb, wait);
 	if (jbd2_journal_start_commit(EXT4_SB(sb)->s_journal, &target)) {
 		if (wait)
 			jbd2_log_wait_commit(EXT4_SB(sb)->s_journal, target);
@@ -3450,7 +3454,7 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
 		goto restore_opts;
 	}
 
-	if (sbi->s_mount_opt & EXT4_MOUNT_ABORT)
+	if (sbi->s_mount_flags & EXT4_MF_FS_ABORTED)
 		ext4_abort(sb, __func__, "Abort forced by user");
 
 	sb->s_flags = (sb->s_flags & ~MS_POSIXACL) |
@@ -3465,7 +3469,7 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
 
 	if ((*flags & MS_RDONLY) != (sb->s_flags & MS_RDONLY) ||
 		n_blocks_count > ext4_blocks_count(es)) {
-		if (sbi->s_mount_opt & EXT4_MOUNT_ABORT) {
+		if (sbi->s_mount_flags & EXT4_MF_FS_ABORTED) {
 			err = -EROFS;
 			goto restore_opts;
 		}
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index 304b411cb8b..8970d8c49bb 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -966,7 +966,7 @@ static int parse_options(char *options, int is_vfat, int silent, int *debug,
 
 	opts->fs_uid = current_uid();
 	opts->fs_gid = current_gid();
-	opts->fs_fmask = current_umask();
+	opts->fs_fmask = opts->fs_dmask = current_umask();
 	opts->allow_utime = -1;
 	opts->codepage = fat_default_codepage;
 	opts->iocharset = fat_default_iocharset;
diff --git a/fs/gfs2/Kconfig b/fs/gfs2/Kconfig
index cad957cdb1e..5971359d209 100644
--- a/fs/gfs2/Kconfig
+++ b/fs/gfs2/Kconfig
@@ -1,6 +1,6 @@
 config GFS2_FS
 	tristate "GFS2 file system support"
-	depends on EXPERIMENTAL && (64BIT || LBD)
+	depends on EXPERIMENTAL && (64BIT || LBDAF)
 	select DLM if GFS2_FS_LOCKING_DLM
 	select CONFIGFS_FS if GFS2_FS_LOCKING_DLM
 	select SYSFS if GFS2_FS_LOCKING_DLM
diff --git a/fs/isofs/dir.c b/fs/isofs/dir.c
index 2f0dc5a1463..8ba5441063b 100644
--- a/fs/isofs/dir.c
+++ b/fs/isofs/dir.c
@@ -195,9 +195,8 @@ static int do_isofs_readdir(struct inode *inode, struct file *filp,
 		 * Do not report hidden files if so instructed, or associated
 		 * files unless instructed to do so
 		 */
-		if ((sbi->s_hide == 'y' &&
-				(de->flags[-sbi->s_high_sierra] & 1)) ||
-				(sbi->s_showassoc =='n' &&
+		if ((sbi->s_hide && (de->flags[-sbi->s_high_sierra] & 1)) ||
+		    (!sbi->s_showassoc &&
 				(de->flags[-sbi->s_high_sierra] & 4))) {
 			filp->f_pos += de_len;
 			continue;
diff --git a/fs/isofs/inode.c b/fs/isofs/inode.c
index 068b34b5a10..58a7963e168 100644
--- a/fs/isofs/inode.c
+++ b/fs/isofs/inode.c
@@ -141,13 +141,17 @@ static const struct dentry_operations isofs_dentry_ops[] = {
 };
 
 struct iso9660_options{
-	char map;
-	char rock;
+	unsigned int rock:1;
+	unsigned int cruft:1;
+	unsigned int hide:1;
+	unsigned int showassoc:1;
+	unsigned int nocompress:1;
+	unsigned int overriderockperm:1;
+	unsigned int uid_set:1;
+	unsigned int gid_set:1;
+	unsigned int utf8:1;
+	unsigned char map;
 	char joliet;
-	char cruft;
-	char hide;
-	char showassoc;
-	char nocompress;
 	unsigned char check;
 	unsigned int blocksize;
 	mode_t fmode;
@@ -155,7 +159,6 @@ struct iso9660_options{
 	gid_t gid;
 	uid_t uid;
 	char *iocharset;
-	unsigned char utf8;
 	/* LVE */
 	s32 session;
 	s32 sbsector;
@@ -312,7 +315,7 @@ enum {
 	Opt_block, Opt_check_r, Opt_check_s, Opt_cruft, Opt_gid, Opt_ignore,
 	Opt_iocharset, Opt_map_a, Opt_map_n, Opt_map_o, Opt_mode, Opt_nojoliet,
 	Opt_norock, Opt_sb, Opt_session, Opt_uid, Opt_unhide, Opt_utf8, Opt_err,
-	Opt_nocompress, Opt_hide, Opt_showassoc, Opt_dmode,
+	Opt_nocompress, Opt_hide, Opt_showassoc, Opt_dmode, Opt_overriderockperm,
 };
 
 static const match_table_t tokens = {
@@ -340,6 +343,7 @@ static const match_table_t tokens = {
 	{Opt_gid, "gid=%u"},
 	{Opt_mode, "mode=%u"},
 	{Opt_dmode, "dmode=%u"},
+	{Opt_overriderockperm, "overriderockperm"},
 	{Opt_block, "block=%u"},
 	{Opt_ignore, "conv=binary"},
 	{Opt_ignore, "conv=b"},
@@ -359,24 +363,22 @@ static int parse_options(char *options, struct iso9660_options *popt)
 	int option;
 
 	popt->map = 'n';
-	popt->rock = 'y';
-	popt->joliet = 'y';
-	popt->cruft = 'n';
-	popt->hide = 'n';
-	popt->showassoc = 'n';
+	popt->rock = 1;
+	popt->joliet = 1;
+	popt->cruft = 0;
+	popt->hide = 0;
+	popt->showassoc = 0;
 	popt->check = 'u';		/* unset */
 	popt->nocompress = 0;
 	popt->blocksize = 1024;
-	popt->fmode = popt->dmode = S_IRUGO | S_IXUGO; /*
-					 * r-x for all.  The disc could
-					 * be shared with DOS machines so
-					 * virtually anything could be
-					 * a valid executable.
-					 */
+	popt->fmode = popt->dmode = ISOFS_INVALID_MODE;
+	popt->uid_set = 0;
+	popt->gid_set = 0;
 	popt->gid = 0;
 	popt->uid = 0;
 	popt->iocharset = NULL;
 	popt->utf8 = 0;
+	popt->overriderockperm = 0;
 	popt->session=-1;
 	popt->sbsector=-1;
 	if (!options)
@@ -393,20 +395,20 @@ static int parse_options(char *options, struct iso9660_options *popt)
 		token = match_token(p, tokens, args);
 		switch (token) {
 		case Opt_norock:
-			popt->rock = 'n';
+			popt->rock = 0;
 			break;
 		case Opt_nojoliet:
-			popt->joliet = 'n';
+			popt->joliet = 0;
 			break;
 		case Opt_hide:
-			popt->hide = 'y';
+			popt->hide = 1;
 			break;
 		case Opt_unhide:
 		case Opt_showassoc:
-			popt->showassoc = 'y';
+			popt->showassoc = 1;
 			break;
 		case Opt_cruft:
-			popt->cruft = 'y';
+			popt->cruft = 1;
 			break;
 		case Opt_utf8:
 			popt->utf8 = 1;
@@ -450,11 +452,13 @@ static int parse_options(char *options, struct iso9660_options *popt)
 			if (match_int(&args[0], &option))
 				return 0;
 			popt->uid = option;
+			popt->uid_set = 1;
 			break;
 		case Opt_gid:
 			if (match_int(&args[0], &option))
 				return 0;
 			popt->gid = option;
+			popt->gid_set = 1;
 			break;
 		case Opt_mode:
 			if (match_int(&args[0], &option))
@@ -466,6 +470,9 @@ static int parse_options(char *options, struct iso9660_options *popt)
 				return 0;
 			popt->dmode = option;
 			break;
+		case Opt_overriderockperm:
+			popt->overriderockperm = 1;
+			break;
 		case Opt_block:
 			if (match_int(&args[0], &option))
 				return 0;
@@ -650,7 +657,7 @@ static int isofs_fill_super(struct super_block *s, void *data, int silent)
 					goto out_freebh;
 
 				sbi->s_high_sierra = 1;
-				opt.rock = 'n';
+				opt.rock = 0;
 				h_pri = (struct hs_primary_descriptor *)vdp;
 				goto root_found;
 			}
@@ -673,7 +680,7 @@ static int isofs_fill_super(struct super_block *s, void *data, int silent)
 
 root_found:
 
-	if (joliet_level && (pri == NULL || opt.rock == 'n')) {
+	if (joliet_level && (pri == NULL || !opt.rock)) {
 		/* This is the case of Joliet with the norock mount flag.
 		 * A disc with both Joliet and Rock Ridge is handled later
 		 */
@@ -802,22 +809,31 @@ root_found:
 	s->s_op = &isofs_sops;
 	s->s_export_op = &isofs_export_ops;
 	sbi->s_mapping = opt.map;
-	sbi->s_rock = (opt.rock == 'y' ? 2 : 0);
+	sbi->s_rock = (opt.rock ? 2 : 0);
 	sbi->s_rock_offset = -1; /* initial offset, will guess until SP is found*/
 	sbi->s_cruft = opt.cruft;
 	sbi->s_hide = opt.hide;
 	sbi->s_showassoc = opt.showassoc;
 	sbi->s_uid = opt.uid;
 	sbi->s_gid = opt.gid;
+	sbi->s_uid_set = opt.uid_set;
+	sbi->s_gid_set = opt.gid_set;
 	sbi->s_utf8 = opt.utf8;
 	sbi->s_nocompress = opt.nocompress;
+	sbi->s_overriderockperm = opt.overriderockperm;
 	/*
 	 * It would be incredibly stupid to allow people to mark every file
 	 * on the disk as suid, so we merely allow them to set the default
 	 * permissions.
 	 */
-	sbi->s_fmode = opt.fmode & 0777;
-	sbi->s_dmode = opt.dmode & 0777;
+	if (opt.fmode != ISOFS_INVALID_MODE)
+		sbi->s_fmode = opt.fmode & 0777;
+	else
+		sbi->s_fmode = ISOFS_INVALID_MODE;
+	if (opt.dmode != ISOFS_INVALID_MODE)
+		sbi->s_dmode = opt.dmode & 0777;
+	else
+		sbi->s_dmode = ISOFS_INVALID_MODE;
 
 	/*
 	 * Read the root inode, which _may_ result in changing
@@ -1095,18 +1111,6 @@ static const struct address_space_operations isofs_aops = {
 	.bmap = _isofs_bmap
 };
 
-static inline void test_and_set_uid(uid_t *p, uid_t value)
-{
-	if (value)
-		*p = value;
-}
-
-static inline void test_and_set_gid(gid_t *p, gid_t value)
-{
-        if (value)
-                *p = value;
-}
-
 static int isofs_read_level3_size(struct inode *inode)
 {
 	unsigned long bufsize = ISOFS_BUFFER_SIZE(inode);
@@ -1261,7 +1265,10 @@ static int isofs_read_inode(struct inode *inode)
 	ei->i_file_format = isofs_file_normal;
 
 	if (de->flags[-high_sierra] & 2) {
-		inode->i_mode = sbi->s_dmode | S_IFDIR;
+		if (sbi->s_dmode != ISOFS_INVALID_MODE)
+			inode->i_mode = S_IFDIR | sbi->s_dmode;
+		else
+			inode->i_mode = S_IFDIR | S_IRUGO | S_IXUGO;
 		inode->i_nlink = 1;	/*
 					 * Set to 1.  We know there are 2, but
 					 * the find utility tries to optimize
@@ -1270,8 +1277,16 @@ static int isofs_read_inode(struct inode *inode)
 					 * do it the hard way.
 					 */
 	} else {
-		/* Everybody gets to read the file. */
-		inode->i_mode = sbi->s_fmode | S_IFREG;
+		if (sbi->s_fmode != ISOFS_INVALID_MODE) {
+			inode->i_mode = S_IFREG | sbi->s_fmode;
+		} else {
+			/*
+			 * Set default permissions: r-x for all.  The disc
+			 * could be shared with DOS machines so virtually
+			 * anything could be a valid executable.
+			 */
+			inode->i_mode = S_IFREG | S_IRUGO | S_IXUGO;
+		}
 		inode->i_nlink = 1;
 	}
 	inode->i_uid = sbi->s_uid;
@@ -1300,7 +1315,7 @@ static int isofs_read_inode(struct inode *inode)
 	 * this CDROM was mounted with the cruft option.
 	 */
 
-	if (sbi->s_cruft == 'y')
+	if (sbi->s_cruft)
 		inode->i_size &= 0x00ffffff;
 
 	if (de->interleave[0]) {
@@ -1346,9 +1361,18 @@ static int isofs_read_inode(struct inode *inode)
 	if (!high_sierra) {
 		parse_rock_ridge_inode(de, inode);
 		/* if we want uid/gid set, override the rock ridge setting */
-		test_and_set_uid(&inode->i_uid, sbi->s_uid);
-		test_and_set_gid(&inode->i_gid, sbi->s_gid);
+		if (sbi->s_uid_set)
+			inode->i_uid = sbi->s_uid;
+		if (sbi->s_gid_set)
+			inode->i_gid = sbi->s_gid;
 	}
+	/* Now set final access rights if overriding rock ridge setting */
+	if (S_ISDIR(inode->i_mode) && sbi->s_overriderockperm &&
+	    sbi->s_dmode != ISOFS_INVALID_MODE)
+		inode->i_mode = S_IFDIR | sbi->s_dmode;
+	if (S_ISREG(inode->i_mode) && sbi->s_overriderockperm &&
+	    sbi->s_fmode != ISOFS_INVALID_MODE)
+		inode->i_mode = S_IFREG | sbi->s_fmode;
 
 	/* Install the inode operations vector */
 	if (S_ISREG(inode->i_mode)) {
diff --git a/fs/isofs/isofs.h b/fs/isofs/isofs.h
index ccbf72faf27..7d33de84f52 100644
--- a/fs/isofs/isofs.h
+++ b/fs/isofs/isofs.h
@@ -35,21 +35,20 @@ struct isofs_sb_info {
 	unsigned long s_log_zone_size;
 	unsigned long s_max_size;
 	
-	unsigned char s_high_sierra; /* A simple flag */
-	unsigned char s_mapping;
 	int           s_rock_offset; /* offset of SUSP fields within SU area */
-	unsigned char s_rock;
 	unsigned char s_joliet_level;
-	unsigned char s_utf8;
-	unsigned char s_cruft; /* Broken disks with high
-				  byte of length containing
-				  junk */
-	unsigned char s_unhide;
-	unsigned char s_nosuid;
-	unsigned char s_nodev;
-	unsigned char s_nocompress;
-	unsigned char s_hide;
-	unsigned char s_showassoc;
+	unsigned char s_mapping;
+	unsigned int  s_high_sierra:1;
+	unsigned int  s_rock:2;
+	unsigned int  s_utf8:1;
+	unsigned int  s_cruft:1; /* Broken disks with high byte of length
+				  * containing junk */
+	unsigned int  s_nocompress:1;
+	unsigned int  s_hide:1;
+	unsigned int  s_showassoc:1;
+	unsigned int  s_overriderockperm:1;
+	unsigned int  s_uid_set:1;
+	unsigned int  s_gid_set:1;
 
 	mode_t s_fmode;
 	mode_t s_dmode;
@@ -58,6 +57,8 @@ struct isofs_sb_info {
 	struct nls_table *s_nls_iocharset; /* Native language support table */
 };
 
+#define ISOFS_INVALID_MODE ((mode_t) -1)
+
 static inline struct isofs_sb_info *ISOFS_SB(struct super_block *sb)
 {
 	return sb->s_fs_info;
diff --git a/fs/isofs/namei.c b/fs/isofs/namei.c
index 8299889a835..eaa831311c9 100644
--- a/fs/isofs/namei.c
+++ b/fs/isofs/namei.c
@@ -142,9 +142,9 @@ isofs_find_entry(struct inode *dir, struct dentry *dentry,
 		 */
 		match = 0;
 		if (dlen > 0 &&
-			(sbi->s_hide =='n' ||
+			(!sbi->s_hide ||
 				(!(de->flags[-sbi->s_high_sierra] & 1))) &&
-			(sbi->s_showassoc =='y' ||
+			(sbi->s_showassoc ||
 				(!(de->flags[-sbi->s_high_sierra] & 4)))) {
 			match = (isofs_cmp(dentry, dpnt, dlen) == 0);
 		}
diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c
index ed886e6db39..73242ba7c7b 100644
--- a/fs/jbd/transaction.c
+++ b/fs/jbd/transaction.c
@@ -1686,35 +1686,6 @@ out:
 	return;
 }
 
-/*
- * journal_try_to_free_buffers() could race with journal_commit_transaction()
- * The latter might still hold the a count on buffers when inspecting
- * them on t_syncdata_list or t_locked_list.
- *
- * journal_try_to_free_buffers() will call this function to
- * wait for the current transaction to finish syncing data buffers, before
- * tryinf to free that buffer.
- *
- * Called with journal->j_state_lock held.
- */
-static void journal_wait_for_transaction_sync_data(journal_t *journal)
-{
-	transaction_t *transaction = NULL;
-	tid_t tid;
-
-	spin_lock(&journal->j_state_lock);
-	transaction = journal->j_committing_transaction;
-
-	if (!transaction) {
-		spin_unlock(&journal->j_state_lock);
-		return;
-	}
-
-	tid = transaction->t_tid;
-	spin_unlock(&journal->j_state_lock);
-	log_wait_commit(journal, tid);
-}
-
 /**
  * int journal_try_to_free_buffers() - try to free page buffers.
  * @journal: journal for operation
@@ -1786,25 +1757,6 @@ int journal_try_to_free_buffers(journal_t *journal,
 
 	ret = try_to_free_buffers(page);
 
-	/*
-	 * There are a number of places where journal_try_to_free_buffers()
-	 * could race with journal_commit_transaction(), the later still
-	 * holds the reference to the buffers to free while processing them.
-	 * try_to_free_buffers() failed to free those buffers. Some of the
-	 * caller of releasepage() request page buffers to be dropped, otherwise
-	 * treat the fail-to-free as errors (such as generic_file_direct_IO())
-	 *
-	 * So, if the caller of try_to_release_page() wants the synchronous
-	 * behaviour(i.e make sure buffers are dropped upon return),
-	 * let's wait for the current transaction to finish flush of
-	 * dirty data buffers, then try to free those buffers again,
-	 * with the journal locked.
-	 */
-	if (ret == 0 && (gfp_mask & __GFP_WAIT) && (gfp_mask & __GFP_FS)) {
-		journal_wait_for_transaction_sync_data(journal);
-		ret = try_to_free_buffers(page);
-	}
-
 busy:
 	return ret;
 }
diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c
index 17159cacbd9..5d70b3e6d49 100644
--- a/fs/jbd2/checkpoint.c
+++ b/fs/jbd2/checkpoint.c
@@ -20,9 +20,9 @@
 #include <linux/time.h>
 #include <linux/fs.h>
 #include <linux/jbd2.h>
-#include <linux/marker.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
+#include <trace/events/jbd2.h>
 
 /*
  * Unlink a buffer from a transaction checkpoint list.
@@ -358,8 +358,7 @@ int jbd2_log_do_checkpoint(journal_t *journal)
 	 * journal straight away.
 	 */
 	result = jbd2_cleanup_journal_tail(journal);
-	trace_mark(jbd2_checkpoint, "dev %s need_checkpoint %d",
-		   journal->j_devname, result);
+	trace_jbd2_checkpoint(journal, result);
 	jbd_debug(1, "cleanup_journal_tail returned %d\n", result);
 	if (result <= 0)
 		return result;
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index 0b7d3b8226f..7b4088b2364 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -16,7 +16,6 @@
 #include <linux/time.h>
 #include <linux/fs.h>
 #include <linux/jbd2.h>
-#include <linux/marker.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
 #include <linux/mm.h>
@@ -26,6 +25,7 @@
 #include <linux/writeback.h>
 #include <linux/backing-dev.h>
 #include <linux/bio.h>
+#include <trace/events/jbd2.h>
 
 /*
  * Default IO end handler for temporary BJ_IO buffer_heads.
@@ -253,6 +253,7 @@ static int journal_submit_data_buffers(journal_t *journal,
 		 * block allocation  with delalloc. We need to write
 		 * only allocated blocks here.
 		 */
+		trace_jbd2_submit_inode_data(jinode->i_vfs_inode);
 		err = journal_submit_inode_data_buffers(mapping);
 		if (!ret)
 			ret = err;
@@ -394,8 +395,7 @@ void jbd2_journal_commit_transaction(journal_t *journal)
 	commit_transaction = journal->j_running_transaction;
 	J_ASSERT(commit_transaction->t_state == T_RUNNING);
 
-	trace_mark(jbd2_start_commit, "dev %s transaction %d",
-		   journal->j_devname, commit_transaction->t_tid);
+	trace_jbd2_start_commit(journal, commit_transaction);
 	jbd_debug(1, "JBD: starting commit of transaction %d\n",
 			commit_transaction->t_tid);
 
@@ -409,6 +409,7 @@ void jbd2_journal_commit_transaction(journal_t *journal)
 	 */
 	if (commit_transaction->t_synchronous_commit)
 		write_op = WRITE_SYNC_PLUG;
+	trace_jbd2_commit_locking(journal, commit_transaction);
 	stats.u.run.rs_wait = commit_transaction->t_max_wait;
 	stats.u.run.rs_locked = jiffies;
 	stats.u.run.rs_running = jbd2_time_diff(commit_transaction->t_start,
@@ -484,6 +485,7 @@ void jbd2_journal_commit_transaction(journal_t *journal)
 	 */
 	jbd2_journal_switch_revoke_table(journal);
 
+	trace_jbd2_commit_flushing(journal, commit_transaction);
 	stats.u.run.rs_flushing = jiffies;
 	stats.u.run.rs_locked = jbd2_time_diff(stats.u.run.rs_locked,
 					       stats.u.run.rs_flushing);
@@ -520,6 +522,7 @@ void jbd2_journal_commit_transaction(journal_t *journal)
 	commit_transaction->t_state = T_COMMIT;
 	spin_unlock(&journal->j_state_lock);
 
+	trace_jbd2_commit_logging(journal, commit_transaction);
 	stats.u.run.rs_logging = jiffies;
 	stats.u.run.rs_flushing = jbd2_time_diff(stats.u.run.rs_flushing,
 						 stats.u.run.rs_logging);
@@ -1054,9 +1057,7 @@ restart_loop:
 	if (journal->j_commit_callback)
 		journal->j_commit_callback(journal, commit_transaction);
 
-	trace_mark(jbd2_end_commit, "dev %s transaction %d head %d",
-		   journal->j_devname, commit_transaction->t_tid,
-		   journal->j_tail_sequence);
+	trace_jbd2_end_commit(journal, commit_transaction);
 	jbd_debug(1, "JBD: commit %d complete, head %d\n",
 		  journal->j_commit_sequence, journal->j_tail_sequence);
 	if (to_free)
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index 62be7d294ec..18bfd5dab64 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -38,6 +38,10 @@
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 #include <linux/math64.h>
+#include <linux/hash.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/jbd2.h>
 
 #include <asm/uaccess.h>
 #include <asm/page.h>
@@ -2377,6 +2381,71 @@ static void __exit journal_exit(void)
 	jbd2_journal_destroy_caches();
 }
 
+/* 
+ * jbd2_dev_to_name is a utility function used by the jbd2 and ext4 
+ * tracing infrastructure to map a dev_t to a device name.
+ *
+ * The caller should use rcu_read_lock() in order to make sure the
+ * device name stays valid until its done with it.  We use
+ * rcu_read_lock() as well to make sure we're safe in case the caller
+ * gets sloppy, and because rcu_read_lock() is cheap and can be safely
+ * nested.
+ */
+struct devname_cache {
+	struct rcu_head	rcu;
+	dev_t		device;
+	char		devname[BDEVNAME_SIZE];
+};
+#define CACHE_SIZE_BITS 6
+static struct devname_cache *devcache[1 << CACHE_SIZE_BITS];
+static DEFINE_SPINLOCK(devname_cache_lock);
+
+static void free_devcache(struct rcu_head *rcu)
+{
+	kfree(rcu);
+}
+
+const char *jbd2_dev_to_name(dev_t device)
+{
+	int	i = hash_32(device, CACHE_SIZE_BITS);
+	char	*ret;
+	struct block_device *bd;
+
+	rcu_read_lock();
+	if (devcache[i] && devcache[i]->device == device) {
+		ret = devcache[i]->devname;
+		rcu_read_unlock();
+		return ret;
+	}
+	rcu_read_unlock();
+
+	spin_lock(&devname_cache_lock);
+	if (devcache[i]) {
+		if (devcache[i]->device == device) {
+			ret = devcache[i]->devname;
+			spin_unlock(&devname_cache_lock);
+			return ret;
+		}
+		call_rcu(&devcache[i]->rcu, free_devcache);
+	}
+	devcache[i] = kmalloc(sizeof(struct devname_cache), GFP_KERNEL);
+	if (!devcache[i]) {
+		spin_unlock(&devname_cache_lock);
+		return "NODEV-ALLOCFAILURE"; /* Something non-NULL */
+	}
+	devcache[i]->device = device;
+	bd = bdget(device);
+	if (bd) {
+		bdevname(bd, devcache[i]->devname);
+		bdput(bd);
+	} else
+		__bdevname(device, devcache[i]->devname);
+	ret = devcache[i]->devname;
+	spin_unlock(&devname_cache_lock);
+	return ret;
+}
+EXPORT_SYMBOL(jbd2_dev_to_name);
+
 MODULE_LICENSE("GPL");
 module_init(journal_init);
 module_exit(journal_exit);
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index 996ffda06bf..494501edba6 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -1547,36 +1547,6 @@ out:
 	return;
 }
 
-/*
- * jbd2_journal_try_to_free_buffers() could race with
- * jbd2_journal_commit_transaction(). The later might still hold the
- * reference count to the buffers when inspecting them on
- * t_syncdata_list or t_locked_list.
- *
- * jbd2_journal_try_to_free_buffers() will call this function to
- * wait for the current transaction to finish syncing data buffers, before
- * try to free that buffer.
- *
- * Called with journal->j_state_lock hold.
- */
-static void jbd2_journal_wait_for_transaction_sync_data(journal_t *journal)
-{
-	transaction_t *transaction;
-	tid_t tid;
-
-	spin_lock(&journal->j_state_lock);
-	transaction = journal->j_committing_transaction;
-
-	if (!transaction) {
-		spin_unlock(&journal->j_state_lock);
-		return;
-	}
-
-	tid = transaction->t_tid;
-	spin_unlock(&journal->j_state_lock);
-	jbd2_log_wait_commit(journal, tid);
-}
-
 /**
  * int jbd2_journal_try_to_free_buffers() - try to free page buffers.
  * @journal: journal for operation
@@ -1649,25 +1619,6 @@ int jbd2_journal_try_to_free_buffers(journal_t *journal,
 
 	ret = try_to_free_buffers(page);
 
-	/*
-	 * There are a number of places where jbd2_journal_try_to_free_buffers()
-	 * could race with jbd2_journal_commit_transaction(), the later still
-	 * holds the reference to the buffers to free while processing them.
-	 * try_to_free_buffers() failed to free those buffers. Some of the
-	 * caller of releasepage() request page buffers to be dropped, otherwise
-	 * treat the fail-to-free as errors (such as generic_file_direct_IO())
-	 *
-	 * So, if the caller of try_to_release_page() wants the synchronous
-	 * behaviour(i.e make sure buffers are dropped upon return),
-	 * let's wait for the current transaction to finish flush of
-	 * dirty data buffers, then try to free those buffers again,
-	 * with the journal locked.
-	 */
-	if (ret == 0 && (gfp_mask & __GFP_WAIT) && (gfp_mask & __GFP_FS)) {
-		jbd2_journal_wait_for_transaction_sync_data(journal);
-		ret = try_to_free_buffers(page);
-	}
-
 busy:
 	return ret;
 }
diff --git a/fs/jffs2/scan.c b/fs/jffs2/scan.c
index 1d437de1e9a..7515e73e2bf 100644
--- a/fs/jffs2/scan.c
+++ b/fs/jffs2/scan.c
@@ -196,7 +196,7 @@ int jffs2_scan_medium(struct jffs2_sb_info *c)
 				if (c->nextblock) {
 					ret = file_dirty(c, c->nextblock);
 					if (ret)
-						return ret;
+						goto out;
 					/* deleting summary information of the old nextblock */
 					jffs2_sum_reset_collected(c->summary);
 				}
@@ -207,7 +207,7 @@ int jffs2_scan_medium(struct jffs2_sb_info *c)
 			} else {
 				ret = file_dirty(c, jeb);
 				if (ret)
-					return ret;
+					goto out;
 			}
 			break;
 
diff --git a/fs/lockd/clntproc.c b/fs/lockd/clntproc.c
index dd7957064a8..f2fdcbce143 100644
--- a/fs/lockd/clntproc.c
+++ b/fs/lockd/clntproc.c
@@ -126,7 +126,6 @@ static void nlmclnt_setlockargs(struct nlm_rqst *req, struct file_lock *fl)
 	struct nlm_lock	*lock = &argp->lock;
 
 	nlmclnt_next_cookie(&argp->cookie);
-	argp->state   = nsm_local_state;
 	memcpy(&lock->fh, NFS_FH(fl->fl_file->f_path.dentry->d_inode), sizeof(struct nfs_fh));
 	lock->caller  = utsname()->nodename;
 	lock->oh.data = req->a_owner;
@@ -165,6 +164,7 @@ int nlmclnt_proc(struct nlm_host *host, int cmd, struct file_lock *fl)
 	/* Set up the argument struct */
 	nlmclnt_setlockargs(call, fl);
 
+	lock_kernel();
 	if (IS_SETLK(cmd) || IS_SETLKW(cmd)) {
 		if (fl->fl_type != F_UNLCK) {
 			call->a_args.block = IS_SETLKW(cmd) ? 1 : 0;
@@ -178,6 +178,7 @@ int nlmclnt_proc(struct nlm_host *host, int cmd, struct file_lock *fl)
 
 	fl->fl_ops->fl_release_private(fl);
 	fl->fl_ops = NULL;
+	unlock_kernel();
 
 	dprintk("lockd: clnt proc returns %d\n", status);
 	return status;
@@ -519,6 +520,7 @@ nlmclnt_lock(struct nlm_rqst *req, struct file_lock *fl)
 
 	if (nsm_monitor(host) < 0)
 		goto out;
+	req->a_args.state = nsm_local_state;
 
 	fl->fl_flags |= FL_ACCESS;
 	status = do_vfs_lock(fl);
diff --git a/fs/lockd/mon.c b/fs/lockd/mon.c
index 6d5d4a4169e..7fce1b52584 100644
--- a/fs/lockd/mon.c
+++ b/fs/lockd/mon.c
@@ -53,7 +53,7 @@ static				DEFINE_SPINLOCK(nsm_lock);
 /*
  * Local NSM state
  */
-int	__read_mostly		nsm_local_state;
+u32	__read_mostly		nsm_local_state;
 int	__read_mostly		nsm_use_hostnames;
 
 static inline struct sockaddr *nsm_addr(const struct nsm_handle *nsm)
@@ -112,6 +112,7 @@ static struct rpc_clnt *nsm_create(void)
 		.program		= &nsm_program,
 		.version		= NSM_VERSION,
 		.authflavor		= RPC_AUTH_NULL,
+		.flags			= RPC_CLNT_CREATE_NOPING,
 	};
 
 	return rpc_create(&args);
@@ -184,13 +185,19 @@ int nsm_monitor(const struct nlm_host *host)
 	nsm->sm_mon_name = nsm_use_hostnames ? nsm->sm_name : nsm->sm_addrbuf;
 
 	status = nsm_mon_unmon(nsm, NSMPROC_MON, &res);
-	if (res.status != 0)
+	if (unlikely(res.status != 0))
 		status = -EIO;
-	if (status < 0)
+	if (unlikely(status < 0)) {
 		printk(KERN_NOTICE "lockd: cannot monitor %s\n", nsm->sm_name);
-	else
-		nsm->sm_monitored = 1;
-	return status;
+		return status;
+	}
+
+	nsm->sm_monitored = 1;
+	if (unlikely(nsm_local_state != res.state)) {
+		nsm_local_state = res.state;
+		dprintk("lockd: NSM state changed to %d\n", nsm_local_state);
+	}
+	return 0;
 }
 
 /**
diff --git a/fs/lockd/svclock.c b/fs/lockd/svclock.c
index 83ee34203bd..e577a78d7ba 100644
--- a/fs/lockd/svclock.c
+++ b/fs/lockd/svclock.c
@@ -326,6 +326,8 @@ static void nlmsvc_freegrantargs(struct nlm_rqst *call)
 {
 	if (call->a_args.lock.oh.data != call->a_owner)
 		kfree(call->a_args.lock.oh.data);
+
+	locks_release_private(&call->a_args.lock.fl);
 }
 
 /*
diff --git a/fs/locks.c b/fs/locks.c
index ec3deea29e3..b6440f52178 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -151,7 +151,7 @@ static struct file_lock *locks_alloc_lock(void)
 	return kmem_cache_alloc(filelock_cache, GFP_KERNEL);
 }
 
-static void locks_release_private(struct file_lock *fl)
+void locks_release_private(struct file_lock *fl)
 {
 	if (fl->fl_ops) {
 		if (fl->fl_ops->fl_release_private)
@@ -165,6 +165,7 @@ static void locks_release_private(struct file_lock *fl)
 	}
 
 }
+EXPORT_SYMBOL_GPL(locks_release_private);
 
 /* Free a lock which is not in use. */
 static void locks_free_lock(struct file_lock *fl)
diff --git a/fs/minix/minix.h b/fs/minix/minix.h
index cb7fdd11f9a..9dcf95b4211 100644
--- a/fs/minix/minix.h
+++ b/fs/minix/minix.h
@@ -1,3 +1,6 @@
+#ifndef FS_MINIX_H
+#define FS_MINIX_H
+
 #include <linux/fs.h>
 #include <linux/pagemap.h>
 #include <linux/minix_fs.h>
@@ -86,3 +89,5 @@ static inline struct minix_inode_info *minix_i(struct inode *inode)
 {
 	return list_entry(inode, struct minix_inode_info, vfs_inode);
 }
+
+#endif /* FS_MINIX_H */
diff --git a/fs/namespace.c b/fs/namespace.c
index 2dd333b0fe7..a7bea8c8bd4 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1937,6 +1937,21 @@ dput_out:
 	return retval;
 }
 
+static struct mnt_namespace *alloc_mnt_ns(void)
+{
+	struct mnt_namespace *new_ns;
+
+	new_ns = kmalloc(sizeof(struct mnt_namespace), GFP_KERNEL);
+	if (!new_ns)
+		return ERR_PTR(-ENOMEM);
+	atomic_set(&new_ns->count, 1);
+	new_ns->root = NULL;
+	INIT_LIST_HEAD(&new_ns->list);
+	init_waitqueue_head(&new_ns->poll);
+	new_ns->event = 0;
+	return new_ns;
+}
+
 /*
  * Allocate a new namespace structure and populate it with contents
  * copied from the namespace of the passed in task structure.
@@ -1948,14 +1963,9 @@ static struct mnt_namespace *dup_mnt_ns(struct mnt_namespace *mnt_ns,
 	struct vfsmount *rootmnt = NULL, *pwdmnt = NULL;
 	struct vfsmount *p, *q;
 
-	new_ns = kmalloc(sizeof(struct mnt_namespace), GFP_KERNEL);
-	if (!new_ns)
-		return ERR_PTR(-ENOMEM);
-
-	atomic_set(&new_ns->count, 1);
-	INIT_LIST_HEAD(&new_ns->list);
-	init_waitqueue_head(&new_ns->poll);
-	new_ns->event = 0;
+	new_ns = alloc_mnt_ns();
+	if (IS_ERR(new_ns))
+		return new_ns;
 
 	down_write(&namespace_sem);
 	/* First pass: copy the tree topology */
@@ -2019,6 +2029,24 @@ struct mnt_namespace *copy_mnt_ns(unsigned long flags, struct mnt_namespace *ns,
 	return new_ns;
 }
 
+/**
+ * create_mnt_ns - creates a private namespace and adds a root filesystem
+ * @mnt: pointer to the new root filesystem mountpoint
+ */
+struct mnt_namespace *create_mnt_ns(struct vfsmount *mnt)
+{
+	struct mnt_namespace *new_ns;
+
+	new_ns = alloc_mnt_ns();
+	if (!IS_ERR(new_ns)) {
+		mnt->mnt_ns = new_ns;
+		new_ns->root = mnt;
+		list_add(&new_ns->list, &new_ns->root->mnt_list);
+	}
+	return new_ns;
+}
+EXPORT_SYMBOL(create_mnt_ns);
+
 SYSCALL_DEFINE5(mount, char __user *, dev_name, char __user *, dir_name,
 		char __user *, type, unsigned long, flags, void __user *, data)
 {
@@ -2246,10 +2274,14 @@ void __init mnt_init(void)
 	init_mount_tree();
 }
 
-void __put_mnt_ns(struct mnt_namespace *ns)
+void put_mnt_ns(struct mnt_namespace *ns)
 {
-	struct vfsmount *root = ns->root;
+	struct vfsmount *root;
 	LIST_HEAD(umount_list);
+
+	if (!atomic_dec_and_lock(&ns->count, &vfsmount_lock))
+		return;
+	root = ns->root;
 	ns->root = NULL;
 	spin_unlock(&vfsmount_lock);
 	down_write(&namespace_sem);
@@ -2260,3 +2292,4 @@ void __put_mnt_ns(struct mnt_namespace *ns)
 	release_mounts(&umount_list);
 	kfree(ns);
 }
+EXPORT_SYMBOL(put_mnt_ns);
diff --git a/fs/nfs/Kconfig b/fs/nfs/Kconfig
index e67f3ec0773..2a77bc25d5a 100644
--- a/fs/nfs/Kconfig
+++ b/fs/nfs/Kconfig
@@ -1,6 +1,6 @@
 config NFS_FS
 	tristate "NFS client support"
-	depends on INET
+	depends on INET && FILE_LOCKING
 	select LOCKD
 	select SUNRPC
 	select NFS_ACL_SUPPORT if NFS_V3_ACL
@@ -74,6 +74,15 @@ config NFS_V4
 
 	  If unsure, say N.
 
+config NFS_V4_1
+	bool "NFS client support for NFSv4.1 (DEVELOPER ONLY)"
+	depends on NFS_V4 && EXPERIMENTAL
+	help
+	  This option enables support for minor version 1 of the NFSv4 protocol
+	  (draft-ietf-nfsv4-minorversion1) in the kernel's NFS client.
+
+	  Unless you're an NFS developer, say N.
+
 config ROOT_NFS
 	bool "Root file system on NFS"
 	depends on NFS_FS=y && IP_PNP
diff --git a/fs/nfs/callback.c b/fs/nfs/callback.c
index a886e692ddd..7f604c7941f 100644
--- a/fs/nfs/callback.c
+++ b/fs/nfs/callback.c
@@ -17,6 +17,9 @@
 #include <linux/freezer.h>
 #include <linux/kthread.h>
 #include <linux/sunrpc/svcauth_gss.h>
+#if defined(CONFIG_NFS_V4_1)
+#include <linux/sunrpc/bc_xprt.h>
+#endif
 
 #include <net/inet_sock.h>
 
@@ -28,11 +31,12 @@
 
 struct nfs_callback_data {
 	unsigned int users;
+	struct svc_serv *serv;
 	struct svc_rqst *rqst;
 	struct task_struct *task;
 };
 
-static struct nfs_callback_data nfs_callback_info;
+static struct nfs_callback_data nfs_callback_info[NFS4_MAX_MINOR_VERSION + 1];
 static DEFINE_MUTEX(nfs_callback_mutex);
 static struct svc_program nfs4_callback_program;
 
@@ -56,10 +60,10 @@ module_param_call(callback_tcpport, param_set_port, param_get_int,
 		 &nfs_callback_set_tcpport, 0644);
 
 /*
- * This is the callback kernel thread.
+ * This is the NFSv4 callback kernel thread.
  */
 static int
-nfs_callback_svc(void *vrqstp)
+nfs4_callback_svc(void *vrqstp)
 {
 	int err, preverr = 0;
 	struct svc_rqst *rqstp = vrqstp;
@@ -97,20 +101,12 @@ nfs_callback_svc(void *vrqstp)
 }
 
 /*
- * Bring up the callback thread if it is not already up.
+ * Prepare to bring up the NFSv4 callback service
  */
-int nfs_callback_up(void)
+struct svc_rqst *
+nfs4_callback_up(struct svc_serv *serv)
 {
-	struct svc_serv *serv = NULL;
-	int ret = 0;
-
-	mutex_lock(&nfs_callback_mutex);
-	if (nfs_callback_info.users++ || nfs_callback_info.task != NULL)
-		goto out;
-	serv = svc_create(&nfs4_callback_program, NFS4_CALLBACK_BUFSIZE, NULL);
-	ret = -ENOMEM;
-	if (!serv)
-		goto out_err;
+	int ret;
 
 	ret = svc_create_xprt(serv, "tcp", PF_INET,
 				nfs_callback_set_tcpport, SVC_SOCK_ANONYMOUS);
@@ -127,27 +123,174 @@ int nfs_callback_up(void)
 		nfs_callback_tcpport6 = ret;
 		dprintk("NFS: Callback listener port = %u (af %u)\n",
 				nfs_callback_tcpport6, PF_INET6);
-	} else if (ret != -EAFNOSUPPORT)
+	} else if (ret == -EAFNOSUPPORT)
+		ret = 0;
+	else
 		goto out_err;
 #endif	/* defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) */
 
-	nfs_callback_info.rqst = svc_prepare_thread(serv, &serv->sv_pools[0]);
-	if (IS_ERR(nfs_callback_info.rqst)) {
-		ret = PTR_ERR(nfs_callback_info.rqst);
-		nfs_callback_info.rqst = NULL;
+	return svc_prepare_thread(serv, &serv->sv_pools[0]);
+
+out_err:
+	if (ret == 0)
+		ret = -ENOMEM;
+	return ERR_PTR(ret);
+}
+
+#if defined(CONFIG_NFS_V4_1)
+/*
+ * The callback service for NFSv4.1 callbacks
+ */
+static int
+nfs41_callback_svc(void *vrqstp)
+{
+	struct svc_rqst *rqstp = vrqstp;
+	struct svc_serv *serv = rqstp->rq_server;
+	struct rpc_rqst *req;
+	int error;
+	DEFINE_WAIT(wq);
+
+	set_freezable();
+
+	/*
+	 * FIXME: do we really need to run this under the BKL? If so, please
+	 * add a comment about what it's intended to protect.
+	 */
+	lock_kernel();
+	while (!kthread_should_stop()) {
+		prepare_to_wait(&serv->sv_cb_waitq, &wq, TASK_INTERRUPTIBLE);
+		spin_lock_bh(&serv->sv_cb_lock);
+		if (!list_empty(&serv->sv_cb_list)) {
+			req = list_first_entry(&serv->sv_cb_list,
+					struct rpc_rqst, rq_bc_list);
+			list_del(&req->rq_bc_list);
+			spin_unlock_bh(&serv->sv_cb_lock);
+			dprintk("Invoking bc_svc_process()\n");
+			error = bc_svc_process(serv, req, rqstp);
+			dprintk("bc_svc_process() returned w/ error code= %d\n",
+				error);
+		} else {
+			spin_unlock_bh(&serv->sv_cb_lock);
+			schedule();
+		}
+		finish_wait(&serv->sv_cb_waitq, &wq);
+	}
+	unlock_kernel();
+	return 0;
+}
+
+/*
+ * Bring up the NFSv4.1 callback service
+ */
+struct svc_rqst *
+nfs41_callback_up(struct svc_serv *serv, struct rpc_xprt *xprt)
+{
+	struct svc_xprt *bc_xprt;
+	struct svc_rqst *rqstp = ERR_PTR(-ENOMEM);
+
+	dprintk("--> %s\n", __func__);
+	/* Create a svc_sock for the service */
+	bc_xprt = svc_sock_create(serv, xprt->prot);
+	if (!bc_xprt)
+		goto out;
+
+	/*
+	 * Save the svc_serv in the transport so that it can
+	 * be referenced when the session backchannel is initialized
+	 */
+	serv->bc_xprt = bc_xprt;
+	xprt->bc_serv = serv;
+
+	INIT_LIST_HEAD(&serv->sv_cb_list);
+	spin_lock_init(&serv->sv_cb_lock);
+	init_waitqueue_head(&serv->sv_cb_waitq);
+	rqstp = svc_prepare_thread(serv, &serv->sv_pools[0]);
+	if (IS_ERR(rqstp))
+		svc_sock_destroy(bc_xprt);
+out:
+	dprintk("--> %s return %p\n", __func__, rqstp);
+	return rqstp;
+}
+
+static inline int nfs_minorversion_callback_svc_setup(u32 minorversion,
+		struct svc_serv *serv, struct rpc_xprt *xprt,
+		struct svc_rqst **rqstpp, int (**callback_svc)(void *vrqstp))
+{
+	if (minorversion) {
+		*rqstpp = nfs41_callback_up(serv, xprt);
+		*callback_svc = nfs41_callback_svc;
+	}
+	return minorversion;
+}
+
+static inline void nfs_callback_bc_serv(u32 minorversion, struct rpc_xprt *xprt,
+		struct nfs_callback_data *cb_info)
+{
+	if (minorversion)
+		xprt->bc_serv = cb_info->serv;
+}
+#else
+static inline int nfs_minorversion_callback_svc_setup(u32 minorversion,
+		struct svc_serv *serv, struct rpc_xprt *xprt,
+		struct svc_rqst **rqstpp, int (**callback_svc)(void *vrqstp))
+{
+	return 0;
+}
+
+static inline void nfs_callback_bc_serv(u32 minorversion, struct rpc_xprt *xprt,
+		struct nfs_callback_data *cb_info)
+{
+}
+#endif /* CONFIG_NFS_V4_1 */
+
+/*
+ * Bring up the callback thread if it is not already up.
+ */
+int nfs_callback_up(u32 minorversion, struct rpc_xprt *xprt)
+{
+	struct svc_serv *serv = NULL;
+	struct svc_rqst *rqstp;
+	int (*callback_svc)(void *vrqstp);
+	struct nfs_callback_data *cb_info = &nfs_callback_info[minorversion];
+	char svc_name[12];
+	int ret = 0;
+	int minorversion_setup;
+
+	mutex_lock(&nfs_callback_mutex);
+	if (cb_info->users++ || cb_info->task != NULL) {
+		nfs_callback_bc_serv(minorversion, xprt, cb_info);
+		goto out;
+	}
+	serv = svc_create(&nfs4_callback_program, NFS4_CALLBACK_BUFSIZE, NULL);
+	if (!serv) {
+		ret = -ENOMEM;
+		goto out_err;
+	}
+
+	minorversion_setup =  nfs_minorversion_callback_svc_setup(minorversion,
+					serv, xprt, &rqstp, &callback_svc);
+	if (!minorversion_setup) {
+		/* v4.0 callback setup */
+		rqstp = nfs4_callback_up(serv);
+		callback_svc = nfs4_callback_svc;
+	}
+
+	if (IS_ERR(rqstp)) {
+		ret = PTR_ERR(rqstp);
 		goto out_err;
 	}
 
 	svc_sock_update_bufs(serv);
 
-	nfs_callback_info.task = kthread_run(nfs_callback_svc,
-					     nfs_callback_info.rqst,
-					     "nfsv4-svc");
-	if (IS_ERR(nfs_callback_info.task)) {
-		ret = PTR_ERR(nfs_callback_info.task);
-		svc_exit_thread(nfs_callback_info.rqst);
-		nfs_callback_info.rqst = NULL;
-		nfs_callback_info.task = NULL;
+	sprintf(svc_name, "nfsv4.%u-svc", minorversion);
+	cb_info->serv = serv;
+	cb_info->rqst = rqstp;
+	cb_info->task = kthread_run(callback_svc, cb_info->rqst, svc_name);
+	if (IS_ERR(cb_info->task)) {
+		ret = PTR_ERR(cb_info->task);
+		svc_exit_thread(cb_info->rqst);
+		cb_info->rqst = NULL;
+		cb_info->task = NULL;
 		goto out_err;
 	}
 out:
@@ -164,22 +307,25 @@ out:
 out_err:
 	dprintk("NFS: Couldn't create callback socket or server thread; "
 		"err = %d\n", ret);
-	nfs_callback_info.users--;
+	cb_info->users--;
 	goto out;
 }
 
 /*
  * Kill the callback thread if it's no longer being used.
  */
-void nfs_callback_down(void)
+void nfs_callback_down(int minorversion)
 {
+	struct nfs_callback_data *cb_info = &nfs_callback_info[minorversion];
+
 	mutex_lock(&nfs_callback_mutex);
-	nfs_callback_info.users--;
-	if (nfs_callback_info.users == 0 && nfs_callback_info.task != NULL) {
-		kthread_stop(nfs_callback_info.task);
-		svc_exit_thread(nfs_callback_info.rqst);
-		nfs_callback_info.rqst = NULL;
-		nfs_callback_info.task = NULL;
+	cb_info->users--;
+	if (cb_info->users == 0 && cb_info->task != NULL) {
+		kthread_stop(cb_info->task);
+		svc_exit_thread(cb_info->rqst);
+		cb_info->serv = NULL;
+		cb_info->rqst = NULL;
+		cb_info->task = NULL;
 	}
 	mutex_unlock(&nfs_callback_mutex);
 }
diff --git a/fs/nfs/callback.h b/fs/nfs/callback.h
index e110e286a26..07baa8254ca 100644
--- a/fs/nfs/callback.h
+++ b/fs/nfs/callback.h
@@ -20,13 +20,24 @@ enum nfs4_callback_procnum {
 enum nfs4_callback_opnum {
 	OP_CB_GETATTR = 3,
 	OP_CB_RECALL  = 4,
+/* Callback operations new to NFSv4.1 */
+	OP_CB_LAYOUTRECALL  = 5,
+	OP_CB_NOTIFY        = 6,
+	OP_CB_PUSH_DELEG    = 7,
+	OP_CB_RECALL_ANY    = 8,
+	OP_CB_RECALLABLE_OBJ_AVAIL = 9,
+	OP_CB_RECALL_SLOT   = 10,
+	OP_CB_SEQUENCE      = 11,
+	OP_CB_WANTS_CANCELLED = 12,
+	OP_CB_NOTIFY_LOCK   = 13,
+	OP_CB_NOTIFY_DEVICEID = 14,
 	OP_CB_ILLEGAL = 10044,
 };
 
 struct cb_compound_hdr_arg {
 	unsigned int taglen;
 	const char *tag;
-	unsigned int callback_ident;
+	unsigned int minorversion;
 	unsigned nops;
 };
 
@@ -59,16 +70,59 @@ struct cb_recallargs {
 	uint32_t truncate;
 };
 
+#if defined(CONFIG_NFS_V4_1)
+
+struct referring_call {
+	uint32_t			rc_sequenceid;
+	uint32_t			rc_slotid;
+};
+
+struct referring_call_list {
+	struct nfs4_sessionid		rcl_sessionid;
+	uint32_t			rcl_nrefcalls;
+	struct referring_call 		*rcl_refcalls;
+};
+
+struct cb_sequenceargs {
+	struct sockaddr			*csa_addr;
+	struct nfs4_sessionid		csa_sessionid;
+	uint32_t			csa_sequenceid;
+	uint32_t			csa_slotid;
+	uint32_t			csa_highestslotid;
+	uint32_t			csa_cachethis;
+	uint32_t			csa_nrclists;
+	struct referring_call_list	*csa_rclists;
+};
+
+struct cb_sequenceres {
+	__be32				csr_status;
+	struct nfs4_sessionid		csr_sessionid;
+	uint32_t			csr_sequenceid;
+	uint32_t			csr_slotid;
+	uint32_t			csr_highestslotid;
+	uint32_t			csr_target_highestslotid;
+};
+
+extern unsigned nfs4_callback_sequence(struct cb_sequenceargs *args,
+				       struct cb_sequenceres *res);
+
+#endif /* CONFIG_NFS_V4_1 */
+
 extern __be32 nfs4_callback_getattr(struct cb_getattrargs *args, struct cb_getattrres *res);
 extern __be32 nfs4_callback_recall(struct cb_recallargs *args, void *dummy);
 
 #ifdef CONFIG_NFS_V4
-extern int nfs_callback_up(void);
-extern void nfs_callback_down(void);
-#else
-#define nfs_callback_up()	(0)
-#define nfs_callback_down()	do {} while(0)
-#endif
+extern int nfs_callback_up(u32 minorversion, struct rpc_xprt *xprt);
+extern void nfs_callback_down(int minorversion);
+#endif /* CONFIG_NFS_V4 */
+
+/*
+ * nfs41: Callbacks are expected to not cause substantial latency,
+ * so we limit their concurrency to 1 by setting up the maximum number
+ * of slots for the backchannel.
+ */
+#define NFS41_BC_MIN_CALLBACKS 1
+#define NFS41_BC_MAX_CALLBACKS 1
 
 extern unsigned int nfs_callback_set_tcpport;
 extern unsigned short nfs_callback_tcpport;
diff --git a/fs/nfs/callback_proc.c b/fs/nfs/callback_proc.c
index f7e83e23cf9..b7da1f54da6 100644
--- a/fs/nfs/callback_proc.c
+++ b/fs/nfs/callback_proc.c
@@ -101,3 +101,130 @@ out:
 	dprintk("%s: exit with status = %d\n", __func__, ntohl(res));
 	return res;
 }
+
+#if defined(CONFIG_NFS_V4_1)
+
+/*
+ * Validate the sequenceID sent by the server.
+ * Return success if the sequenceID is one more than what we last saw on
+ * this slot, accounting for wraparound.  Increments the slot's sequence.
+ *
+ * We don't yet implement a duplicate request cache, so at this time
+ * we will log replays, and process them as if we had not seen them before,
+ * but we don't bump the sequence in the slot.  Not too worried about it,
+ * since we only currently implement idempotent callbacks anyway.
+ *
+ * We have a single slot backchannel at this time, so we don't bother
+ * checking the used_slots bit array on the table.  The lower layer guarantees
+ * a single outstanding callback request at a time.
+ */
+static int
+validate_seqid(struct nfs4_slot_table *tbl, u32 slotid, u32 seqid)
+{
+	struct nfs4_slot *slot;
+
+	dprintk("%s enter. slotid %d seqid %d\n",
+		__func__, slotid, seqid);
+
+	if (slotid > NFS41_BC_MAX_CALLBACKS)
+		return htonl(NFS4ERR_BADSLOT);
+
+	slot = tbl->slots + slotid;
+	dprintk("%s slot table seqid: %d\n", __func__, slot->seq_nr);
+
+	/* Normal */
+	if (likely(seqid == slot->seq_nr + 1)) {
+		slot->seq_nr++;
+		return htonl(NFS4_OK);
+	}
+
+	/* Replay */
+	if (seqid == slot->seq_nr) {
+		dprintk("%s seqid %d is a replay - no DRC available\n",
+			__func__, seqid);
+		return htonl(NFS4_OK);
+	}
+
+	/* Wraparound */
+	if (seqid == 1 && (slot->seq_nr + 1) == 0) {
+		slot->seq_nr = 1;
+		return htonl(NFS4_OK);
+	}
+
+	/* Misordered request */
+	return htonl(NFS4ERR_SEQ_MISORDERED);
+}
+
+/*
+ * Returns a pointer to a held 'struct nfs_client' that matches the server's
+ * address, major version number, and session ID.  It is the caller's
+ * responsibility to release the returned reference.
+ *
+ * Returns NULL if there are no connections with sessions, or if no session
+ * matches the one of interest.
+ */
+ static struct nfs_client *find_client_with_session(
+	const struct sockaddr *addr, u32 nfsversion,
+	struct nfs4_sessionid *sessionid)
+{
+	struct nfs_client *clp;
+
+	clp = nfs_find_client(addr, 4);
+	if (clp == NULL)
+		return NULL;
+
+	do {
+		struct nfs_client *prev = clp;
+
+		if (clp->cl_session != NULL) {
+			if (memcmp(clp->cl_session->sess_id.data,
+					sessionid->data,
+					NFS4_MAX_SESSIONID_LEN) == 0) {
+				/* Returns a held reference to clp */
+				return clp;
+			}
+		}
+		clp = nfs_find_client_next(prev);
+		nfs_put_client(prev);
+	} while (clp != NULL);
+
+	return NULL;
+}
+
+/* FIXME: referring calls should be processed */
+unsigned nfs4_callback_sequence(struct cb_sequenceargs *args,
+				struct cb_sequenceres *res)
+{
+	struct nfs_client *clp;
+	int i, status;
+
+	for (i = 0; i < args->csa_nrclists; i++)
+		kfree(args->csa_rclists[i].rcl_refcalls);
+	kfree(args->csa_rclists);
+
+	status = htonl(NFS4ERR_BADSESSION);
+	clp = find_client_with_session(args->csa_addr, 4, &args->csa_sessionid);
+	if (clp == NULL)
+		goto out;
+
+	status = validate_seqid(&clp->cl_session->bc_slot_table,
+				args->csa_slotid, args->csa_sequenceid);
+	if (status)
+		goto out_putclient;
+
+	memcpy(&res->csr_sessionid, &args->csa_sessionid,
+	       sizeof(res->csr_sessionid));
+	res->csr_sequenceid = args->csa_sequenceid;
+	res->csr_slotid = args->csa_slotid;
+	res->csr_highestslotid = NFS41_BC_MAX_CALLBACKS - 1;
+	res->csr_target_highestslotid = NFS41_BC_MAX_CALLBACKS - 1;
+
+out_putclient:
+	nfs_put_client(clp);
+out:
+	dprintk("%s: exit with status = %d\n", __func__, ntohl(status));
+	res->csr_status = status;
+	return res->csr_status;
+}
+
+#endif /* CONFIG_NFS_V4_1 */
diff --git a/fs/nfs/callback_xdr.c b/fs/nfs/callback_xdr.c
index dd0ef34b584..e5a2dac5f71 100644
--- a/fs/nfs/callback_xdr.c
+++ b/fs/nfs/callback_xdr.c
@@ -20,6 +20,11 @@
 				2 + 2 + 3 + 3)
 #define CB_OP_RECALL_RES_MAXSZ	(CB_OP_HDR_RES_MAXSZ)
 
+#if defined(CONFIG_NFS_V4_1)
+#define CB_OP_SEQUENCE_RES_MAXSZ	(CB_OP_HDR_RES_MAXSZ + \
+					4 + 1 + 3)
+#endif /* CONFIG_NFS_V4_1 */
+
 #define NFSDBG_FACILITY NFSDBG_CALLBACK
 
 typedef __be32 (*callback_process_op_t)(void *, void *);
@@ -132,7 +137,6 @@ static __be32 decode_stateid(struct xdr_stream *xdr, nfs4_stateid *stateid)
 static __be32 decode_compound_hdr_arg(struct xdr_stream *xdr, struct cb_compound_hdr_arg *hdr)
 {
 	__be32 *p;
-	unsigned int minor_version;
 	__be32 status;
 
 	status = decode_string(xdr, &hdr->taglen, &hdr->tag);
@@ -147,15 +151,19 @@ static __be32 decode_compound_hdr_arg(struct xdr_stream *xdr, struct cb_compound
 	p = read_buf(xdr, 12);
 	if (unlikely(p == NULL))
 		return htonl(NFS4ERR_RESOURCE);
-	minor_version = ntohl(*p++);
-	/* Check minor version is zero. */
-	if (minor_version != 0) {
-		printk(KERN_WARNING "%s: NFSv4 server callback with illegal minor version %u!\n",
-				__func__, minor_version);
+	hdr->minorversion = ntohl(*p++);
+	/* Check minor version is zero or one. */
+	if (hdr->minorversion <= 1) {
+		p++;	/* skip callback_ident */
+	} else {
+		printk(KERN_WARNING "%s: NFSv4 server callback with "
+			"illegal minor version %u!\n",
+			__func__, hdr->minorversion);
 		return htonl(NFS4ERR_MINOR_VERS_MISMATCH);
 	}
-	hdr->callback_ident = ntohl(*p++);
 	hdr->nops = ntohl(*p);
+	dprintk("%s: minorversion %d nops %d\n", __func__,
+		hdr->minorversion, hdr->nops);
 	return 0;
 }
 
@@ -204,6 +212,122 @@ out:
 	return status;
 }
 
+#if defined(CONFIG_NFS_V4_1)
+
+static unsigned decode_sessionid(struct xdr_stream *xdr,
+				 struct nfs4_sessionid *sid)
+{
+	uint32_t *p;
+	int len = NFS4_MAX_SESSIONID_LEN;
+
+	p = read_buf(xdr, len);
+	if (unlikely(p == NULL))
+		return htonl(NFS4ERR_RESOURCE);;
+
+	memcpy(sid->data, p, len);
+	return 0;
+}
+
+static unsigned decode_rc_list(struct xdr_stream *xdr,
+			       struct referring_call_list *rc_list)
+{
+	uint32_t *p;
+	int i;
+	unsigned status;
+
+	status = decode_sessionid(xdr, &rc_list->rcl_sessionid);
+	if (status)
+		goto out;
+
+	status = htonl(NFS4ERR_RESOURCE);
+	p = read_buf(xdr, sizeof(uint32_t));
+	if (unlikely(p == NULL))
+		goto out;
+
+	rc_list->rcl_nrefcalls = ntohl(*p++);
+	if (rc_list->rcl_nrefcalls) {
+		p = read_buf(xdr,
+			     rc_list->rcl_nrefcalls * 2 * sizeof(uint32_t));
+		if (unlikely(p == NULL))
+			goto out;
+		rc_list->rcl_refcalls = kmalloc(rc_list->rcl_nrefcalls *
+						sizeof(*rc_list->rcl_refcalls),
+						GFP_KERNEL);
+		if (unlikely(rc_list->rcl_refcalls == NULL))
+			goto out;
+		for (i = 0; i < rc_list->rcl_nrefcalls; i++) {
+			rc_list->rcl_refcalls[i].rc_sequenceid = ntohl(*p++);
+			rc_list->rcl_refcalls[i].rc_slotid = ntohl(*p++);
+		}
+	}
+	status = 0;
+
+out:
+	return status;
+}
+
+static unsigned decode_cb_sequence_args(struct svc_rqst *rqstp,
+					struct xdr_stream *xdr,
+					struct cb_sequenceargs *args)
+{
+	uint32_t *p;
+	int i;
+	unsigned status;
+
+	status = decode_sessionid(xdr, &args->csa_sessionid);
+	if (status)
+		goto out;
+
+	status = htonl(NFS4ERR_RESOURCE);
+	p = read_buf(xdr, 5 * sizeof(uint32_t));
+	if (unlikely(p == NULL))
+		goto out;
+
+	args->csa_addr = svc_addr(rqstp);
+	args->csa_sequenceid = ntohl(*p++);
+	args->csa_slotid = ntohl(*p++);
+	args->csa_highestslotid = ntohl(*p++);
+	args->csa_cachethis = ntohl(*p++);
+	args->csa_nrclists = ntohl(*p++);
+	args->csa_rclists = NULL;
+	if (args->csa_nrclists) {
+		args->csa_rclists = kmalloc(args->csa_nrclists *
+					    sizeof(*args->csa_rclists),
+					    GFP_KERNEL);
+		if (unlikely(args->csa_rclists == NULL))
+			goto out;
+
+		for (i = 0; i < args->csa_nrclists; i++) {
+			status = decode_rc_list(xdr, &args->csa_rclists[i]);
+			if (status)
+				goto out_free;
+		}
+	}
+	status = 0;
+
+	dprintk("%s: sessionid %x:%x:%x:%x sequenceid %u slotid %u "
+		"highestslotid %u cachethis %d nrclists %u\n",
+		__func__,
+		((u32 *)&args->csa_sessionid)[0],
+		((u32 *)&args->csa_sessionid)[1],
+		((u32 *)&args->csa_sessionid)[2],
+		((u32 *)&args->csa_sessionid)[3],
+		args->csa_sequenceid, args->csa_slotid,
+		args->csa_highestslotid, args->csa_cachethis,
+		args->csa_nrclists);
+out:
+	dprintk("%s: exit with status = %d\n", __func__, ntohl(status));
+	return status;
+
+out_free:
+	for (i = 0; i < args->csa_nrclists; i++)
+		kfree(args->csa_rclists[i].rcl_refcalls);
+	kfree(args->csa_rclists);
+	goto out;
+}
+
+#endif /* CONFIG_NFS_V4_1 */
+
 static __be32 encode_string(struct xdr_stream *xdr, unsigned int len, const char *str)
 {
 	__be32 *p;
@@ -353,31 +477,134 @@ out:
 	return status;
 }
 
-static __be32 process_op(struct svc_rqst *rqstp,
+#if defined(CONFIG_NFS_V4_1)
+
+static unsigned encode_sessionid(struct xdr_stream *xdr,
+				 const struct nfs4_sessionid *sid)
+{
+	uint32_t *p;
+	int len = NFS4_MAX_SESSIONID_LEN;
+
+	p = xdr_reserve_space(xdr, len);
+	if (unlikely(p == NULL))
+		return htonl(NFS4ERR_RESOURCE);
+
+	memcpy(p, sid, len);
+	return 0;
+}
+
+static unsigned encode_cb_sequence_res(struct svc_rqst *rqstp,
+				       struct xdr_stream *xdr,
+				       const struct cb_sequenceres *res)
+{
+	uint32_t *p;
+	unsigned status = res->csr_status;
+
+	if (unlikely(status != 0))
+		goto out;
+
+	encode_sessionid(xdr, &res->csr_sessionid);
+
+	p = xdr_reserve_space(xdr, 4 * sizeof(uint32_t));
+	if (unlikely(p == NULL))
+		return htonl(NFS4ERR_RESOURCE);
+
+	*p++ = htonl(res->csr_sequenceid);
+	*p++ = htonl(res->csr_slotid);
+	*p++ = htonl(res->csr_highestslotid);
+	*p++ = htonl(res->csr_target_highestslotid);
+out:
+	dprintk("%s: exit with status = %d\n", __func__, ntohl(status));
+	return status;
+}
+
+static __be32
+preprocess_nfs41_op(int nop, unsigned int op_nr, struct callback_op **op)
+{
+	if (op_nr == OP_CB_SEQUENCE) {
+		if (nop != 0)
+			return htonl(NFS4ERR_SEQUENCE_POS);
+	} else {
+		if (nop == 0)
+			return htonl(NFS4ERR_OP_NOT_IN_SESSION);
+	}
+
+	switch (op_nr) {
+	case OP_CB_GETATTR:
+	case OP_CB_RECALL:
+	case OP_CB_SEQUENCE:
+		*op = &callback_ops[op_nr];
+		break;
+
+	case OP_CB_LAYOUTRECALL:
+	case OP_CB_NOTIFY_DEVICEID:
+	case OP_CB_NOTIFY:
+	case OP_CB_PUSH_DELEG:
+	case OP_CB_RECALL_ANY:
+	case OP_CB_RECALLABLE_OBJ_AVAIL:
+	case OP_CB_RECALL_SLOT:
+	case OP_CB_WANTS_CANCELLED:
+	case OP_CB_NOTIFY_LOCK:
+		return htonl(NFS4ERR_NOTSUPP);
+
+	default:
+		return htonl(NFS4ERR_OP_ILLEGAL);
+	}
+
+	return htonl(NFS_OK);
+}
+
+#else /* CONFIG_NFS_V4_1 */
+
+static __be32
+preprocess_nfs41_op(int nop, unsigned int op_nr, struct callback_op **op)
+{
+	return htonl(NFS4ERR_MINOR_VERS_MISMATCH);
+}
+
+#endif /* CONFIG_NFS_V4_1 */
+
+static __be32
+preprocess_nfs4_op(unsigned int op_nr, struct callback_op **op)
+{
+	switch (op_nr) {
+	case OP_CB_GETATTR:
+	case OP_CB_RECALL:
+		*op = &callback_ops[op_nr];
+		break;
+	default:
+		return htonl(NFS4ERR_OP_ILLEGAL);
+	}
+
+	return htonl(NFS_OK);
+}
+
+static __be32 process_op(uint32_t minorversion, int nop,
+		struct svc_rqst *rqstp,
 		struct xdr_stream *xdr_in, void *argp,
 		struct xdr_stream *xdr_out, void *resp)
 {
 	struct callback_op *op = &callback_ops[0];
 	unsigned int op_nr = OP_CB_ILLEGAL;
-	__be32 status = 0;
+	__be32 status;
 	long maxlen;
 	__be32 res;
 
 	dprintk("%s: start\n", __func__);
 	status = decode_op_hdr(xdr_in, &op_nr);
-	if (likely(status == 0)) {
-		switch (op_nr) {
-			case OP_CB_GETATTR:
-			case OP_CB_RECALL:
-				op = &callback_ops[op_nr];
-				break;
-			default:
-				op_nr = OP_CB_ILLEGAL;
-				op = &callback_ops[0];
-				status = htonl(NFS4ERR_OP_ILLEGAL);
-		}
+	if (unlikely(status)) {
+		status = htonl(NFS4ERR_OP_ILLEGAL);
+		goto out;
 	}
 
+	dprintk("%s: minorversion=%d nop=%d op_nr=%u\n",
+		__func__, minorversion, nop, op_nr);
+
+	status = minorversion ? preprocess_nfs41_op(nop, op_nr, &op) :
+				preprocess_nfs4_op(op_nr, &op);
+	if (status == htonl(NFS4ERR_OP_ILLEGAL))
+		op_nr = OP_CB_ILLEGAL;
+out:
 	maxlen = xdr_out->end - xdr_out->p;
 	if (maxlen > 0 && maxlen < PAGE_SIZE) {
 		if (likely(status == 0 && op->decode_args != NULL))
@@ -425,7 +652,8 @@ static __be32 nfs4_callback_compound(struct svc_rqst *rqstp, void *argp, void *r
 		return rpc_system_err;
 
 	while (status == 0 && nops != hdr_arg.nops) {
-		status = process_op(rqstp, &xdr_in, argp, &xdr_out, resp);
+		status = process_op(hdr_arg.minorversion, nops,
+				    rqstp, &xdr_in, argp, &xdr_out, resp);
 		nops++;
 	}
 
@@ -452,7 +680,15 @@ static struct callback_op callback_ops[] = {
 		.process_op = (callback_process_op_t)nfs4_callback_recall,
 		.decode_args = (callback_decode_arg_t)decode_recall_args,
 		.res_maxsize = CB_OP_RECALL_RES_MAXSZ,
-	}
+	},
+#if defined(CONFIG_NFS_V4_1)
+	[OP_CB_SEQUENCE] = {
+		.process_op = (callback_process_op_t)nfs4_callback_sequence,
+		.decode_args = (callback_decode_arg_t)decode_cb_sequence_args,
+		.encode_res = (callback_encode_res_t)encode_cb_sequence_res,
+		.res_maxsize = CB_OP_SEQUENCE_RES_MAXSZ,
+	},
+#endif /* CONFIG_NFS_V4_1 */
 };
 
 /*
diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index 75c9cd2aa11..c2d061675d8 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -37,6 +37,7 @@
 #include <linux/in6.h>
 #include <net/ipv6.h>
 #include <linux/nfs_xdr.h>
+#include <linux/sunrpc/bc_xprt.h>
 
 #include <asm/system.h>
 
@@ -102,6 +103,7 @@ struct nfs_client_initdata {
 	size_t addrlen;
 	const struct nfs_rpc_ops *rpc_ops;
 	int proto;
+	u32 minorversion;
 };
 
 /*
@@ -114,18 +116,13 @@ static struct nfs_client *nfs_alloc_client(const struct nfs_client_initdata *cl_
 {
 	struct nfs_client *clp;
 	struct rpc_cred *cred;
+	int err = -ENOMEM;
 
 	if ((clp = kzalloc(sizeof(*clp), GFP_KERNEL)) == NULL)
 		goto error_0;
 
 	clp->rpc_ops = cl_init->rpc_ops;
 
-	if (cl_init->rpc_ops->version == 4) {
-		if (nfs_callback_up() < 0)
-			goto error_2;
-		__set_bit(NFS_CS_CALLBACK, &clp->cl_res_state);
-	}
-
 	atomic_set(&clp->cl_count, 1);
 	clp->cl_cons_state = NFS_CS_INITING;
 
@@ -133,9 +130,10 @@ static struct nfs_client *nfs_alloc_client(const struct nfs_client_initdata *cl_
 	clp->cl_addrlen = cl_init->addrlen;
 
 	if (cl_init->hostname) {
+		err = -ENOMEM;
 		clp->cl_hostname = kstrdup(cl_init->hostname, GFP_KERNEL);
 		if (!clp->cl_hostname)
-			goto error_3;
+			goto error_cleanup;
 	}
 
 	INIT_LIST_HEAD(&clp->cl_superblocks);
@@ -150,6 +148,7 @@ static struct nfs_client *nfs_alloc_client(const struct nfs_client_initdata *cl_
 	rpc_init_wait_queue(&clp->cl_rpcwaitq, "NFS client");
 	clp->cl_boot_time = CURRENT_TIME;
 	clp->cl_state = 1 << NFS4CLNT_LEASE_EXPIRED;
+	clp->cl_minorversion = cl_init->minorversion;
 #endif
 	cred = rpc_lookup_machine_cred();
 	if (!IS_ERR(cred))
@@ -159,13 +158,10 @@ static struct nfs_client *nfs_alloc_client(const struct nfs_client_initdata *cl_
 
 	return clp;
 
-error_3:
-	if (__test_and_clear_bit(NFS_CS_CALLBACK, &clp->cl_res_state))
-		nfs_callback_down();
-error_2:
+error_cleanup:
 	kfree(clp);
 error_0:
-	return NULL;
+	return ERR_PTR(err);
 }
 
 static void nfs4_shutdown_client(struct nfs_client *clp)
@@ -182,12 +178,42 @@ static void nfs4_shutdown_client(struct nfs_client *clp)
 }
 
 /*
+ * Destroy the NFS4 callback service
+ */
+static void nfs4_destroy_callback(struct nfs_client *clp)
+{
+#ifdef CONFIG_NFS_V4
+	if (__test_and_clear_bit(NFS_CS_CALLBACK, &clp->cl_res_state))
+		nfs_callback_down(clp->cl_minorversion);
+#endif /* CONFIG_NFS_V4 */
+}
+
+/*
+ * Clears/puts all minor version specific parts from an nfs_client struct
+ * reverting it to minorversion 0.
+ */
+static void nfs4_clear_client_minor_version(struct nfs_client *clp)
+{
+#ifdef CONFIG_NFS_V4_1
+	if (nfs4_has_session(clp)) {
+		nfs4_destroy_session(clp->cl_session);
+		clp->cl_session = NULL;
+	}
+
+	clp->cl_call_sync = _nfs4_call_sync;
+#endif /* CONFIG_NFS_V4_1 */
+
+	nfs4_destroy_callback(clp);
+}
+
+/*
  * Destroy a shared client record
  */
 static void nfs_free_client(struct nfs_client *clp)
 {
 	dprintk("--> nfs_free_client(%u)\n", clp->rpc_ops->version);
 
+	nfs4_clear_client_minor_version(clp);
 	nfs4_shutdown_client(clp);
 
 	nfs_fscache_release_client_cookie(clp);
@@ -196,9 +222,6 @@ static void nfs_free_client(struct nfs_client *clp)
 	if (!IS_ERR(clp->cl_rpcclient))
 		rpc_shutdown_client(clp->cl_rpcclient);
 
-	if (__test_and_clear_bit(NFS_CS_CALLBACK, &clp->cl_res_state))
-		nfs_callback_down();
-
 	if (clp->cl_machine_cred != NULL)
 		put_rpccred(clp->cl_machine_cred);
 
@@ -347,7 +370,8 @@ struct nfs_client *nfs_find_client(const struct sockaddr *addr, u32 nfsversion)
 		struct sockaddr *clap = (struct sockaddr *)&clp->cl_addr;
 
 		/* Don't match clients that failed to initialise properly */
-		if (clp->cl_cons_state != NFS_CS_READY)
+		if (!(clp->cl_cons_state == NFS_CS_READY ||
+		      clp->cl_cons_state == NFS_CS_SESSION_INITING))
 			continue;
 
 		/* Different NFS versions cannot share the same nfs_client */
@@ -420,7 +444,9 @@ static struct nfs_client *nfs_match_client(const struct nfs_client_initdata *dat
 
 		if (clp->cl_proto != data->proto)
 			continue;
-
+		/* Match nfsv4 minorversion */
+		if (clp->cl_minorversion != data->minorversion)
+			continue;
 		/* Match the full socket address */
 		if (!nfs_sockaddr_cmp(sap, clap))
 			continue;
@@ -456,9 +482,10 @@ static struct nfs_client *nfs_get_client(const struct nfs_client_initdata *cl_in
 		spin_unlock(&nfs_client_lock);
 
 		new = nfs_alloc_client(cl_init);
-	} while (new);
+	} while (!IS_ERR(new));
 
-	return ERR_PTR(-ENOMEM);
+	dprintk("--> nfs_get_client() = %ld [failed]\n", PTR_ERR(new));
+	return new;
 
 	/* install a new client and return with it unready */
 install_client:
@@ -478,7 +505,7 @@ found_client:
 		nfs_free_client(new);
 
 	error = wait_event_killable(nfs_client_active_wq,
-				clp->cl_cons_state != NFS_CS_INITING);
+				clp->cl_cons_state < NFS_CS_INITING);
 	if (error < 0) {
 		nfs_put_client(clp);
 		return ERR_PTR(-ERESTARTSYS);
@@ -499,13 +526,29 @@ found_client:
 /*
  * Mark a server as ready or failed
  */
-static void nfs_mark_client_ready(struct nfs_client *clp, int state)
+void nfs_mark_client_ready(struct nfs_client *clp, int state)
 {
 	clp->cl_cons_state = state;
 	wake_up_all(&nfs_client_active_wq);
 }
 
 /*
+ * With sessions, the client is not marked ready until after a
+ * successful EXCHANGE_ID and CREATE_SESSION.
+ *
+ * Map errors cl_cons_state errors to EPROTONOSUPPORT to indicate
+ * other versions of NFS can be tried.
+ */
+int nfs4_check_client_ready(struct nfs_client *clp)
+{
+	if (!nfs4_has_session(clp))
+		return 0;
+	if (clp->cl_cons_state < NFS_CS_READY)
+		return -EPROTONOSUPPORT;
+	return 0;
+}
+
+/*
  * Initialise the timeout values for a connection
  */
 static void nfs_init_timeout_values(struct rpc_timeout *to, int proto,
@@ -1050,6 +1093,61 @@ error:
 
 #ifdef CONFIG_NFS_V4
 /*
+ * Initialize the NFS4 callback service
+ */
+static int nfs4_init_callback(struct nfs_client *clp)
+{
+	int error;
+
+	if (clp->rpc_ops->version == 4) {
+		if (nfs4_has_session(clp)) {
+			error = xprt_setup_backchannel(
+						clp->cl_rpcclient->cl_xprt,
+						NFS41_BC_MIN_CALLBACKS);
+			if (error < 0)
+				return error;
+		}
+
+		error = nfs_callback_up(clp->cl_minorversion,
+					clp->cl_rpcclient->cl_xprt);
+		if (error < 0) {
+			dprintk("%s: failed to start callback. Error = %d\n",
+				__func__, error);
+			return error;
+		}
+		__set_bit(NFS_CS_CALLBACK, &clp->cl_res_state);
+	}
+	return 0;
+}
+
+/*
+ * Initialize the minor version specific parts of an NFS4 client record
+ */
+static int nfs4_init_client_minor_version(struct nfs_client *clp)
+{
+	clp->cl_call_sync = _nfs4_call_sync;
+
+#if defined(CONFIG_NFS_V4_1)
+	if (clp->cl_minorversion) {
+		struct nfs4_session *session = NULL;
+		/*
+		 * Create the session and mark it expired.
+		 * When a SEQUENCE operation encounters the expired session
+		 * it will do session recovery to initialize it.
+		 */
+		session = nfs4_alloc_session(clp);
+		if (!session)
+			return -ENOMEM;
+
+		clp->cl_session = session;
+		clp->cl_call_sync = _nfs4_call_sync_session;
+	}
+#endif /* CONFIG_NFS_V4_1 */
+
+	return nfs4_init_callback(clp);
+}
+
+/*
  * Initialise an NFS4 client record
  */
 static int nfs4_init_client(struct nfs_client *clp,
@@ -1083,7 +1181,12 @@ static int nfs4_init_client(struct nfs_client *clp,
 	}
 	__set_bit(NFS_CS_IDMAP, &clp->cl_res_state);
 
-	nfs_mark_client_ready(clp, NFS_CS_READY);
+	error = nfs4_init_client_minor_version(clp);
+	if (error < 0)
+		goto error;
+
+	if (!nfs4_has_session(clp))
+		nfs_mark_client_ready(clp, NFS_CS_READY);
 	return 0;
 
 error:
@@ -1101,7 +1204,8 @@ static int nfs4_set_client(struct nfs_server *server,
 		const size_t addrlen,
 		const char *ip_addr,
 		rpc_authflavor_t authflavour,
-		int proto, const struct rpc_timeout *timeparms)
+		int proto, const struct rpc_timeout *timeparms,
+		u32 minorversion)
 {
 	struct nfs_client_initdata cl_init = {
 		.hostname = hostname,
@@ -1109,6 +1213,7 @@ static int nfs4_set_client(struct nfs_server *server,
 		.addrlen = addrlen,
 		.rpc_ops = &nfs_v4_clientops,
 		.proto = proto,
+		.minorversion = minorversion,
 	};
 	struct nfs_client *clp;
 	int error;
@@ -1138,6 +1243,36 @@ error:
 }
 
 /*
+ * Initialize a session.
+ * Note: save the mount rsize and wsize for create_server negotiation.
+ */
+static void nfs4_init_session(struct nfs_client *clp,
+			      unsigned int wsize, unsigned int rsize)
+{
+#if defined(CONFIG_NFS_V4_1)
+	if (nfs4_has_session(clp)) {
+		clp->cl_session->fc_attrs.max_rqst_sz = wsize;
+		clp->cl_session->fc_attrs.max_resp_sz = rsize;
+	}
+#endif /* CONFIG_NFS_V4_1 */
+}
+
+/*
+ * Session has been established, and the client marked ready.
+ * Set the mount rsize and wsize with negotiated fore channel
+ * attributes which will be bound checked in nfs_server_set_fsinfo.
+ */
+static void nfs4_session_set_rwsize(struct nfs_server *server)
+{
+#ifdef CONFIG_NFS_V4_1
+	if (!nfs4_has_session(server->nfs_client))
+		return;
+	server->rsize = server->nfs_client->cl_session->fc_attrs.max_resp_sz;
+	server->wsize = server->nfs_client->cl_session->fc_attrs.max_rqst_sz;
+#endif /* CONFIG_NFS_V4_1 */
+}
+
+/*
  * Create a version 4 volume record
  */
 static int nfs4_init_server(struct nfs_server *server,
@@ -1164,7 +1299,8 @@ static int nfs4_init_server(struct nfs_server *server,
 			data->client_address,
 			data->auth_flavors[0],
 			data->nfs_server.protocol,
-			&timeparms);
+			&timeparms,
+			data->minorversion);
 	if (error < 0)
 		goto error;
 
@@ -1214,6 +1350,8 @@ struct nfs_server *nfs4_create_server(const struct nfs_parsed_mount_data *data,
 	BUG_ON(!server->nfs_client->rpc_ops);
 	BUG_ON(!server->nfs_client->rpc_ops->file_inode_ops);
 
+	nfs4_init_session(server->nfs_client, server->wsize, server->rsize);
+
 	/* Probe the root fh to retrieve its FSID */
 	error = nfs4_path_walk(server, mntfh, data->nfs_server.export_path);
 	if (error < 0)
@@ -1224,6 +1362,8 @@ struct nfs_server *nfs4_create_server(const struct nfs_parsed_mount_data *data,
 		(unsigned long long) server->fsid.minor);
 	dprintk("Mount FH: %d\n", mntfh->size);
 
+	nfs4_session_set_rwsize(server);
+
 	error = nfs_probe_fsinfo(server, mntfh, &fattr);
 	if (error < 0)
 		goto error;
@@ -1282,7 +1422,8 @@ struct nfs_server *nfs4_create_referral_server(struct nfs_clone_mount *data,
 				parent_client->cl_ipaddr,
 				data->authflavor,
 				parent_server->client->cl_xprt->prot,
-				parent_server->client->cl_timeout);
+				parent_server->client->cl_timeout,
+				parent_client->cl_minorversion);
 	if (error < 0)
 		goto error;
 
diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c
index 968225a8801..af05b918cb5 100644
--- a/fs/nfs/delegation.c
+++ b/fs/nfs/delegation.c
@@ -68,29 +68,26 @@ static int nfs_delegation_claim_locks(struct nfs_open_context *ctx, struct nfs4_
 {
 	struct inode *inode = state->inode;
 	struct file_lock *fl;
-	int status;
+	int status = 0;
+
+	if (inode->i_flock == NULL)
+		goto out;
 
+	/* Protect inode->i_flock using the BKL */
+	lock_kernel();
 	for (fl = inode->i_flock; fl != NULL; fl = fl->fl_next) {
 		if (!(fl->fl_flags & (FL_POSIX|FL_FLOCK)))
 			continue;
 		if (nfs_file_open_context(fl->fl_file) != ctx)
 			continue;
+		unlock_kernel();
 		status = nfs4_lock_delegation_recall(state, fl);
-		if (status >= 0)
-			continue;
-		switch (status) {
-			default:
-				printk(KERN_ERR "%s: unhandled error %d.\n",
-						__func__, status);
-			case -NFS4ERR_EXPIRED:
-				/* kill_proc(fl->fl_pid, SIGLOST, 1); */
-			case -NFS4ERR_STALE_CLIENTID:
-				nfs4_schedule_state_recovery(NFS_SERVER(inode)->nfs_client);
-				goto out_err;
-		}
+		if (status < 0)
+			goto out;
+		lock_kernel();
 	}
-	return 0;
-out_err:
+	unlock_kernel();
+out:
 	return status;
 }
 
@@ -268,7 +265,10 @@ static int __nfs_inode_return_delegation(struct inode *inode, struct nfs_delegat
 	struct nfs_inode *nfsi = NFS_I(inode);
 
 	nfs_msync_inode(inode);
-	/* Guard against new delegated open calls */
+	/*
+	 * Guard against new delegated open/lock/unlock calls and against
+	 * state recovery
+	 */
 	down_write(&nfsi->rwsem);
 	nfs_delegation_claim_opens(inode, &delegation->stateid);
 	up_write(&nfsi->rwsem);
diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c
index 08f6b040d28..489fc01a320 100644
--- a/fs/nfs/direct.c
+++ b/fs/nfs/direct.c
@@ -259,6 +259,9 @@ static void nfs_direct_read_release(void *calldata)
 }
 
 static const struct rpc_call_ops nfs_read_direct_ops = {
+#if defined(CONFIG_NFS_V4_1)
+	.rpc_call_prepare = nfs_read_prepare,
+#endif /* CONFIG_NFS_V4_1 */
 	.rpc_call_done = nfs_direct_read_result,
 	.rpc_release = nfs_direct_read_release,
 };
@@ -535,6 +538,9 @@ static void nfs_direct_commit_release(void *calldata)
 }
 
 static const struct rpc_call_ops nfs_commit_direct_ops = {
+#if defined(CONFIG_NFS_V4_1)
+	.rpc_call_prepare = nfs_write_prepare,
+#endif /* CONFIG_NFS_V4_1 */
 	.rpc_call_done = nfs_direct_commit_result,
 	.rpc_release = nfs_direct_commit_release,
 };
@@ -673,6 +679,9 @@ out_unlock:
 }
 
 static const struct rpc_call_ops nfs_write_direct_ops = {
+#if defined(CONFIG_NFS_V4_1)
+	.rpc_call_prepare = nfs_write_prepare,
+#endif /* CONFIG_NFS_V4_1 */
 	.rpc_call_done = nfs_direct_write_result,
 	.rpc_release = nfs_direct_write_release,
 };
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index ec7e27d00bc..0055b813ec2 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -48,6 +48,9 @@ static ssize_t nfs_file_splice_read(struct file *filp, loff_t *ppos,
 					size_t count, unsigned int flags);
 static ssize_t nfs_file_read(struct kiocb *, const struct iovec *iov,
 				unsigned long nr_segs, loff_t pos);
+static ssize_t nfs_file_splice_write(struct pipe_inode_info *pipe,
+					struct file *filp, loff_t *ppos,
+					size_t count, unsigned int flags);
 static ssize_t nfs_file_write(struct kiocb *, const struct iovec *iov,
 				unsigned long nr_segs, loff_t pos);
 static int  nfs_file_flush(struct file *, fl_owner_t id);
@@ -73,6 +76,7 @@ const struct file_operations nfs_file_operations = {
 	.lock		= nfs_lock,
 	.flock		= nfs_flock,
 	.splice_read	= nfs_file_splice_read,
+	.splice_write	= nfs_file_splice_write,
 	.check_flags	= nfs_check_flags,
 	.setlease	= nfs_setlease,
 };
@@ -587,12 +591,38 @@ out_swapfile:
 	goto out;
 }
 
+static ssize_t nfs_file_splice_write(struct pipe_inode_info *pipe,
+				     struct file *filp, loff_t *ppos,
+				     size_t count, unsigned int flags)
+{
+	struct dentry *dentry = filp->f_path.dentry;
+	struct inode *inode = dentry->d_inode;
+	ssize_t ret;
+
+	dprintk("NFS splice_write(%s/%s, %lu@%llu)\n",
+		dentry->d_parent->d_name.name, dentry->d_name.name,
+		(unsigned long) count, (unsigned long long) *ppos);
+
+	/*
+	 * The combination of splice and an O_APPEND destination is disallowed.
+	 */
+
+	nfs_add_stats(inode, NFSIOS_NORMALWRITTENBYTES, count);
+
+	ret = generic_file_splice_write(pipe, filp, ppos, count, flags);
+	if (ret >= 0 && nfs_need_sync_write(filp, inode)) {
+		int err = nfs_do_fsync(nfs_file_open_context(filp), inode);
+		if (err < 0)
+			ret = err;
+	}
+	return ret;
+}
+
 static int do_getlk(struct file *filp, int cmd, struct file_lock *fl)
 {
 	struct inode *inode = filp->f_mapping->host;
 	int status = 0;
 
-	lock_kernel();
 	/* Try local locking first */
 	posix_test_lock(filp, fl);
 	if (fl->fl_type != F_UNLCK) {
@@ -608,7 +638,6 @@ static int do_getlk(struct file *filp, int cmd, struct file_lock *fl)
 
 	status = NFS_PROTO(inode)->lock(filp, cmd, fl);
 out:
-	unlock_kernel();
 	return status;
 out_noconflict:
 	fl->fl_type = F_UNLCK;
@@ -650,13 +679,11 @@ static int do_unlk(struct file *filp, int cmd, struct file_lock *fl)
 	 * 	If we're signalled while cleaning up locks on process exit, we
 	 * 	still need to complete the unlock.
 	 */
-	lock_kernel();
 	/* Use local locking if mounted with "-onolock" */
 	if (!(NFS_SERVER(inode)->flags & NFS_MOUNT_NONLM))
 		status = NFS_PROTO(inode)->lock(filp, cmd, fl);
 	else
 		status = do_vfs_lock(filp, fl);
-	unlock_kernel();
 	return status;
 }
 
@@ -673,13 +700,11 @@ static int do_setlk(struct file *filp, int cmd, struct file_lock *fl)
 	if (status != 0)
 		goto out;
 
-	lock_kernel();
 	/* Use local locking if mounted with "-onolock" */
 	if (!(NFS_SERVER(inode)->flags & NFS_MOUNT_NONLM))
 		status = NFS_PROTO(inode)->lock(filp, cmd, fl);
 	else
 		status = do_vfs_lock(filp, fl);
-	unlock_kernel();
 	if (status < 0)
 		goto out;
 	/*
diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h
index e4d6a8348ad..7dd90a6769d 100644
--- a/fs/nfs/internal.h
+++ b/fs/nfs/internal.h
@@ -2,6 +2,7 @@
  * NFS internal definitions
  */
 
+#include "nfs4_fs.h"
 #include <linux/mount.h>
 #include <linux/security.h>
 
@@ -17,6 +18,18 @@ struct nfs_string;
  */
 #define NFS_MAX_READAHEAD	(RPC_DEF_SLOT_TABLE - 1)
 
+/*
+ * Determine if sessions are in use.
+ */
+static inline int nfs4_has_session(const struct nfs_client *clp)
+{
+#ifdef CONFIG_NFS_V4_1
+	if (clp->cl_session)
+		return 1;
+#endif /* CONFIG_NFS_V4_1 */
+	return 0;
+}
+
 struct nfs_clone_mount {
 	const struct super_block *sb;
 	const struct dentry *dentry;
@@ -30,6 +43,12 @@ struct nfs_clone_mount {
 };
 
 /*
+ * Note: RFC 1813 doesn't limit the number of auth flavors that
+ * a server can return, so make something up.
+ */
+#define NFS_MAX_SECFLAVORS	(12)
+
+/*
  * In-kernel mount arguments
  */
 struct nfs_parsed_mount_data {
@@ -44,6 +63,7 @@ struct nfs_parsed_mount_data {
 	unsigned int		auth_flavor_len;
 	rpc_authflavor_t	auth_flavors[1];
 	char			*client_address;
+	unsigned int		minorversion;
 	char			*fscache_uniq;
 
 	struct {
@@ -77,6 +97,8 @@ struct nfs_mount_request {
 	unsigned short		protocol;
 	struct nfs_fh		*fh;
 	int			noresvport;
+	unsigned int		*auth_flav_len;
+	rpc_authflavor_t	*auth_flavs;
 };
 
 extern int nfs_mount(struct nfs_mount_request *info);
@@ -99,6 +121,8 @@ extern void nfs_free_server(struct nfs_server *server);
 extern struct nfs_server *nfs_clone_server(struct nfs_server *,
 					   struct nfs_fh *,
 					   struct nfs_fattr *);
+extern void nfs_mark_client_ready(struct nfs_client *clp, int state);
+extern int nfs4_check_client_ready(struct nfs_client *clp);
 #ifdef CONFIG_PROC_FS
 extern int __init nfs_fs_proc_init(void);
 extern void nfs_fs_proc_exit(void);
@@ -146,6 +170,20 @@ extern __be32 * nfs_decode_dirent(__be32 *, struct nfs_entry *, int);
 extern struct rpc_procinfo nfs3_procedures[];
 extern __be32 *nfs3_decode_dirent(__be32 *, struct nfs_entry *, int);
 
+/* nfs4proc.c */
+static inline void nfs4_restart_rpc(struct rpc_task *task,
+				    const struct nfs_client *clp)
+{
+#ifdef CONFIG_NFS_V4_1
+	if (nfs4_has_session(clp) &&
+	    test_bit(NFS4CLNT_SESSION_SETUP, &clp->cl_state)) {
+		rpc_restart_call_prepare(task);
+		return;
+	}
+#endif /* CONFIG_NFS_V4_1 */
+	rpc_restart_call(task);
+}
+
 /* nfs4xdr.c */
 #ifdef CONFIG_NFS_V4
 extern __be32 *nfs4_decode_dirent(__be32 *p, struct nfs_entry *entry, int plus);
@@ -205,6 +243,38 @@ extern int nfs4_path_walk(struct nfs_server *server,
 			  const char *path);
 #endif
 
+/* read.c */
+extern void nfs_read_prepare(struct rpc_task *task, void *calldata);
+
+/* write.c */
+extern void nfs_write_prepare(struct rpc_task *task, void *calldata);
+
+/* nfs4proc.c */
+extern int _nfs4_call_sync(struct nfs_server *server,
+			   struct rpc_message *msg,
+			   struct nfs4_sequence_args *args,
+			   struct nfs4_sequence_res *res,
+			   int cache_reply);
+extern int _nfs4_call_sync_session(struct nfs_server *server,
+				   struct rpc_message *msg,
+				   struct nfs4_sequence_args *args,
+				   struct nfs4_sequence_res *res,
+				   int cache_reply);
+
+#ifdef CONFIG_NFS_V4_1
+extern void nfs41_sequence_free_slot(const struct nfs_client *,
+				     struct nfs4_sequence_res *res);
+#endif /* CONFIG_NFS_V4_1 */
+
+static inline void nfs4_sequence_free_slot(const struct nfs_client *clp,
+					   struct nfs4_sequence_res *res)
+{
+#ifdef CONFIG_NFS_V4_1
+	if (nfs4_has_session(clp))
+		nfs41_sequence_free_slot(clp, res);
+#endif /* CONFIG_NFS_V4_1 */
+}
+
 /*
  * Determine the device name as a string
  */
diff --git a/fs/nfs/mount_clnt.c b/fs/nfs/mount_clnt.c
index ca905a5bb1b..38ef9eaec40 100644
--- a/fs/nfs/mount_clnt.c
+++ b/fs/nfs/mount_clnt.c
@@ -20,8 +20,116 @@
 # define NFSDBG_FACILITY	NFSDBG_MOUNT
 #endif
 
+/*
+ * Defined by RFC 1094, section A.3; and RFC 1813, section 5.1.4
+ */
+#define MNTPATHLEN		(1024)
+
+/*
+ * XDR data type sizes
+ */
+#define encode_dirpath_sz	(1 + XDR_QUADLEN(MNTPATHLEN))
+#define MNT_status_sz		(1)
+#define MNT_fhs_status_sz	(1)
+#define MNT_fhandle_sz		XDR_QUADLEN(NFS2_FHSIZE)
+#define MNT_fhandle3_sz		(1 + XDR_QUADLEN(NFS3_FHSIZE))
+#define MNT_authflav3_sz	(1 + NFS_MAX_SECFLAVORS)
+
+/*
+ * XDR argument and result sizes
+ */
+#define MNT_enc_dirpath_sz	encode_dirpath_sz
+#define MNT_dec_mountres_sz	(MNT_status_sz + MNT_fhandle_sz)
+#define MNT_dec_mountres3_sz	(MNT_status_sz + MNT_fhandle_sz + \
+				 MNT_authflav3_sz)
+
+/*
+ * Defined by RFC 1094, section A.5
+ */
+enum {
+	MOUNTPROC_NULL		= 0,
+	MOUNTPROC_MNT		= 1,
+	MOUNTPROC_DUMP		= 2,
+	MOUNTPROC_UMNT		= 3,
+	MOUNTPROC_UMNTALL	= 4,
+	MOUNTPROC_EXPORT	= 5,
+};
+
+/*
+ * Defined by RFC 1813, section 5.2
+ */
+enum {
+	MOUNTPROC3_NULL		= 0,
+	MOUNTPROC3_MNT		= 1,
+	MOUNTPROC3_DUMP		= 2,
+	MOUNTPROC3_UMNT		= 3,
+	MOUNTPROC3_UMNTALL	= 4,
+	MOUNTPROC3_EXPORT	= 5,
+};
+
 static struct rpc_program	mnt_program;
 
+/*
+ * Defined by OpenGroup XNFS Version 3W, chapter 8
+ */
+enum mountstat {
+	MNT_OK			= 0,
+	MNT_EPERM		= 1,
+	MNT_ENOENT		= 2,
+	MNT_EACCES		= 13,
+	MNT_EINVAL		= 22,
+};
+
+static struct {
+	u32 status;
+	int errno;
+} mnt_errtbl[] = {
+	{ .status = MNT_OK,			.errno = 0,		},
+	{ .status = MNT_EPERM,			.errno = -EPERM,	},
+	{ .status = MNT_ENOENT,			.errno = -ENOENT,	},
+	{ .status = MNT_EACCES,			.errno = -EACCES,	},
+	{ .status = MNT_EINVAL,			.errno = -EINVAL,	},
+};
+
+/*
+ * Defined by RFC 1813, section 5.1.5
+ */
+enum mountstat3 {
+	MNT3_OK			= 0,		/* no error */
+	MNT3ERR_PERM		= 1,		/* Not owner */
+	MNT3ERR_NOENT		= 2,		/* No such file or directory */
+	MNT3ERR_IO		= 5,		/* I/O error */
+	MNT3ERR_ACCES		= 13,		/* Permission denied */
+	MNT3ERR_NOTDIR		= 20,		/* Not a directory */
+	MNT3ERR_INVAL		= 22,		/* Invalid argument */
+	MNT3ERR_NAMETOOLONG	= 63,		/* Filename too long */
+	MNT3ERR_NOTSUPP		= 10004,	/* Operation not supported */
+	MNT3ERR_SERVERFAULT	= 10006,	/* A failure on the server */
+};
+
+static struct {
+	u32 status;
+	int errno;
+} mnt3_errtbl[] = {
+	{ .status = MNT3_OK,			.errno = 0,		},
+	{ .status = MNT3ERR_PERM,		.errno = -EPERM,	},
+	{ .status = MNT3ERR_NOENT,		.errno = -ENOENT,	},
+	{ .status = MNT3ERR_IO,			.errno = -EIO,		},
+	{ .status = MNT3ERR_ACCES,		.errno = -EACCES,	},
+	{ .status = MNT3ERR_NOTDIR,		.errno = -ENOTDIR,	},
+	{ .status = MNT3ERR_INVAL,		.errno = -EINVAL,	},
+	{ .status = MNT3ERR_NAMETOOLONG,	.errno = -ENAMETOOLONG,	},
+	{ .status = MNT3ERR_NOTSUPP,		.errno = -ENOTSUPP,	},
+	{ .status = MNT3ERR_SERVERFAULT,	.errno = -ESERVERFAULT,	},
+};
+
+struct mountres {
+	int errno;
+	struct nfs_fh *fh;
+	unsigned int *auth_count;
+	rpc_authflavor_t *auth_flavors;
+};
+
 struct mnt_fhstatus {
 	u32 status;
 	struct nfs_fh *fh;
@@ -35,8 +143,10 @@ struct mnt_fhstatus {
  */
 int nfs_mount(struct nfs_mount_request *info)
 {
-	struct mnt_fhstatus	result = {
-		.fh		= info->fh
+	struct mountres	result = {
+		.fh		= info->fh,
+		.auth_count	= info->auth_flav_len,
+		.auth_flavors	= info->auth_flavs,
 	};
 	struct rpc_message msg	= {
 		.rpc_argp	= info->dirpath,
@@ -68,14 +178,14 @@ int nfs_mount(struct nfs_mount_request *info)
 	if (info->version == NFS_MNT3_VERSION)
 		msg.rpc_proc = &mnt_clnt->cl_procinfo[MOUNTPROC3_MNT];
 	else
-		msg.rpc_proc = &mnt_clnt->cl_procinfo[MNTPROC_MNT];
+		msg.rpc_proc = &mnt_clnt->cl_procinfo[MOUNTPROC_MNT];
 
 	status = rpc_call_sync(mnt_clnt, &msg, 0);
 	rpc_shutdown_client(mnt_clnt);
 
 	if (status < 0)
 		goto out_call_err;
-	if (result.status != 0)
+	if (result.errno != 0)
 		goto out_mnt_err;
 
 	dprintk("NFS: MNT request succeeded\n");
@@ -86,72 +196,215 @@ out:
 
 out_clnt_err:
 	status = PTR_ERR(mnt_clnt);
-	dprintk("NFS: failed to create RPC client, status=%d\n", status);
+	dprintk("NFS: failed to create MNT RPC client, status=%d\n", status);
 	goto out;
 
 out_call_err:
-	dprintk("NFS: failed to start MNT request, status=%d\n", status);
+	dprintk("NFS: MNT request failed, status=%d\n", status);
 	goto out;
 
 out_mnt_err:
-	dprintk("NFS: MNT server returned result %d\n", result.status);
-	status = nfs_stat_to_errno(result.status);
+	dprintk("NFS: MNT server returned result %d\n", result.errno);
+	status = result.errno;
 	goto out;
 }
 
 /*
  * XDR encode/decode functions for MOUNT
  */
-static int xdr_encode_dirpath(struct rpc_rqst *req, __be32 *p,
-			      const char *path)
+
+static int encode_mntdirpath(struct xdr_stream *xdr, const char *pathname)
+{
+	const u32 pathname_len = strlen(pathname);
+	__be32 *p;
+
+	if (unlikely(pathname_len > MNTPATHLEN))
+		return -EIO;
+
+	p = xdr_reserve_space(xdr, sizeof(u32) + pathname_len);
+	if (unlikely(p == NULL))
+		return -EIO;
+	xdr_encode_opaque(p, pathname, pathname_len);
+
+	return 0;
+}
+
+static int mnt_enc_dirpath(struct rpc_rqst *req, __be32 *p,
+			   const char *dirpath)
+{
+	struct xdr_stream xdr;
+
+	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
+	return encode_mntdirpath(&xdr, dirpath);
+}
+
+/*
+ * RFC 1094: "A non-zero status indicates some sort of error.  In this
+ * case, the status is a UNIX error number."  This can be problematic
+ * if the server and client use different errno values for the same
+ * error.
+ *
+ * However, the OpenGroup XNFS spec provides a simple mapping that is
+ * independent of local errno values on the server and the client.
+ */
+static int decode_status(struct xdr_stream *xdr, struct mountres *res)
 {
-	p = xdr_encode_string(p, path);
+	unsigned int i;
+	u32 status;
+	__be32 *p;
+
+	p = xdr_inline_decode(xdr, sizeof(status));
+	if (unlikely(p == NULL))
+		return -EIO;
+	status = ntohl(*p);
 
-	req->rq_slen = xdr_adjust_iovec(req->rq_svec, p);
+	for (i = 0; i <= ARRAY_SIZE(mnt_errtbl); i++) {
+		if (mnt_errtbl[i].status == status) {
+			res->errno = mnt_errtbl[i].errno;
+			return 0;
+		}
+	}
+
+	dprintk("NFS: unrecognized MNT status code: %u\n", status);
+	res->errno = -EACCES;
 	return 0;
 }
 
-static int xdr_decode_fhstatus(struct rpc_rqst *req, __be32 *p,
-			       struct mnt_fhstatus *res)
+static int decode_fhandle(struct xdr_stream *xdr, struct mountres *res)
 {
 	struct nfs_fh *fh = res->fh;
+	__be32 *p;
+
+	p = xdr_inline_decode(xdr, NFS2_FHSIZE);
+	if (unlikely(p == NULL))
+		return -EIO;
+
+	fh->size = NFS2_FHSIZE;
+	memcpy(fh->data, p, NFS2_FHSIZE);
+	return 0;
+}
+
+static int mnt_dec_mountres(struct rpc_rqst *req, __be32 *p,
+			    struct mountres *res)
+{
+	struct xdr_stream xdr;
+	int status;
+
+	xdr_init_decode(&xdr, &req->rq_rcv_buf, p);
+
+	status = decode_status(&xdr, res);
+	if (unlikely(status != 0 || res->errno != 0))
+		return status;
+	return decode_fhandle(&xdr, res);
+}
+
+static int decode_fhs_status(struct xdr_stream *xdr, struct mountres *res)
+{
+	unsigned int i;
+	u32 status;
+	__be32 *p;
 
-	if ((res->status = ntohl(*p++)) == 0) {
-		fh->size = NFS2_FHSIZE;
-		memcpy(fh->data, p, NFS2_FHSIZE);
+	p = xdr_inline_decode(xdr, sizeof(status));
+	if (unlikely(p == NULL))
+		return -EIO;
+	status = ntohl(*p);
+
+	for (i = 0; i <= ARRAY_SIZE(mnt3_errtbl); i++) {
+		if (mnt3_errtbl[i].status == status) {
+			res->errno = mnt3_errtbl[i].errno;
+			return 0;
+		}
 	}
+
+	dprintk("NFS: unrecognized MNT3 status code: %u\n", status);
+	res->errno = -EACCES;
 	return 0;
 }
 
-static int xdr_decode_fhstatus3(struct rpc_rqst *req, __be32 *p,
-				struct mnt_fhstatus *res)
+static int decode_fhandle3(struct xdr_stream *xdr, struct mountres *res)
 {
 	struct nfs_fh *fh = res->fh;
-	unsigned size;
-
-	if ((res->status = ntohl(*p++)) == 0) {
-		size = ntohl(*p++);
-		if (size <= NFS3_FHSIZE && size != 0) {
-			fh->size = size;
-			memcpy(fh->data, p, size);
-		} else
-			res->status = -EBADHANDLE;
+	u32 size;
+	__be32 *p;
+
+	p = xdr_inline_decode(xdr, sizeof(size));
+	if (unlikely(p == NULL))
+		return -EIO;
+
+	size = ntohl(*p++);
+	if (size > NFS3_FHSIZE || size == 0)
+		return -EIO;
+
+	p = xdr_inline_decode(xdr, size);
+	if (unlikely(p == NULL))
+		return -EIO;
+
+	fh->size = size;
+	memcpy(fh->data, p, size);
+	return 0;
+}
+
+static int decode_auth_flavors(struct xdr_stream *xdr, struct mountres *res)
+{
+	rpc_authflavor_t *flavors = res->auth_flavors;
+	unsigned int *count = res->auth_count;
+	u32 entries, i;
+	__be32 *p;
+
+	if (*count == 0)
+		return 0;
+
+	p = xdr_inline_decode(xdr, sizeof(entries));
+	if (unlikely(p == NULL))
+		return -EIO;
+	entries = ntohl(*p);
+	dprintk("NFS: received %u auth flavors\n", entries);
+	if (entries > NFS_MAX_SECFLAVORS)
+		entries = NFS_MAX_SECFLAVORS;
+
+	p = xdr_inline_decode(xdr, sizeof(u32) * entries);
+	if (unlikely(p == NULL))
+		return -EIO;
+
+	if (entries > *count)
+		entries = *count;
+
+	for (i = 0; i < entries; i++) {
+		flavors[i] = ntohl(*p++);
+		dprintk("NFS:\tflavor %u: %d\n", i, flavors[i]);
 	}
+	*count = i;
+
 	return 0;
 }
 
-#define MNT_dirpath_sz		(1 + 256)
-#define MNT_fhstatus_sz		(1 + 8)
-#define MNT_fhstatus3_sz	(1 + 16)
+static int mnt_dec_mountres3(struct rpc_rqst *req, __be32 *p,
+			     struct mountres *res)
+{
+	struct xdr_stream xdr;
+	int status;
+
+	xdr_init_decode(&xdr, &req->rq_rcv_buf, p);
+
+	status = decode_fhs_status(&xdr, res);
+	if (unlikely(status != 0 || res->errno != 0))
+		return status;
+	status = decode_fhandle3(&xdr, res);
+	if (unlikely(status != 0)) {
+		res->errno = -EBADHANDLE;
+		return 0;
+	}
+	return decode_auth_flavors(&xdr, res);
+}
 
 static struct rpc_procinfo mnt_procedures[] = {
-	[MNTPROC_MNT] = {
-		.p_proc		= MNTPROC_MNT,
-		.p_encode	= (kxdrproc_t) xdr_encode_dirpath,
-		.p_decode	= (kxdrproc_t) xdr_decode_fhstatus,
-		.p_arglen	= MNT_dirpath_sz,
-		.p_replen	= MNT_fhstatus_sz,
-		.p_statidx	= MNTPROC_MNT,
+	[MOUNTPROC_MNT] = {
+		.p_proc		= MOUNTPROC_MNT,
+		.p_encode	= (kxdrproc_t)mnt_enc_dirpath,
+		.p_decode	= (kxdrproc_t)mnt_dec_mountres,
+		.p_arglen	= MNT_enc_dirpath_sz,
+		.p_replen	= MNT_dec_mountres_sz,
+		.p_statidx	= MOUNTPROC_MNT,
 		.p_name		= "MOUNT",
 	},
 };
@@ -159,10 +412,10 @@ static struct rpc_procinfo mnt_procedures[] = {
 static struct rpc_procinfo mnt3_procedures[] = {
 	[MOUNTPROC3_MNT] = {
 		.p_proc		= MOUNTPROC3_MNT,
-		.p_encode	= (kxdrproc_t) xdr_encode_dirpath,
-		.p_decode	= (kxdrproc_t) xdr_decode_fhstatus3,
-		.p_arglen	= MNT_dirpath_sz,
-		.p_replen	= MNT_fhstatus3_sz,
+		.p_encode	= (kxdrproc_t)mnt_enc_dirpath,
+		.p_decode	= (kxdrproc_t)mnt_dec_mountres3,
+		.p_arglen	= MNT_enc_dirpath_sz,
+		.p_replen	= MNT_dec_mountres3_sz,
 		.p_statidx	= MOUNTPROC3_MNT,
 		.p_name		= "MOUNT",
 	},
diff --git a/fs/nfs/namespace.c b/fs/nfs/namespace.c
index f01caec8446..40c76678289 100644
--- a/fs/nfs/namespace.c
+++ b/fs/nfs/namespace.c
@@ -65,6 +65,11 @@ char *nfs_path(const char *base,
 		dentry = dentry->d_parent;
 	}
 	spin_unlock(&dcache_lock);
+	if (*end != '/') {
+		if (--buflen < 0)
+			goto Elong;
+		*--end = '/';
+	}
 	namelen = strlen(base);
 	/* Strip off excess slashes in base string */
 	while (namelen > 0 && base[namelen - 1] == '/')
diff --git a/fs/nfs/nfs3acl.c b/fs/nfs/nfs3acl.c
index 6bbf0e6daad..bac60515a4b 100644
--- a/fs/nfs/nfs3acl.c
+++ b/fs/nfs/nfs3acl.c
@@ -207,8 +207,6 @@ struct posix_acl *nfs3_proc_getacl(struct inode *inode, int type)
 	status = nfs_revalidate_inode(server, inode);
 	if (status < 0)
 		return ERR_PTR(status);
-	if (NFS_I(inode)->cache_validity & NFS_INO_INVALID_ACL)
-		nfs_zap_acl_cache(inode);
 	acl = nfs3_get_cached_acl(inode, type);
 	if (acl != ERR_PTR(-EAGAIN))
 		return acl;
diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h
index 84345deab26..61bc3a32e1e 100644
--- a/fs/nfs/nfs4_fs.h
+++ b/fs/nfs/nfs4_fs.h
@@ -44,6 +44,7 @@ enum nfs4_client_state {
 	NFS4CLNT_RECLAIM_REBOOT,
 	NFS4CLNT_RECLAIM_NOGRACE,
 	NFS4CLNT_DELEGRETURN,
+	NFS4CLNT_SESSION_SETUP,
 };
 
 /*
@@ -177,6 +178,14 @@ struct nfs4_state_recovery_ops {
 	int state_flag_bit;
 	int (*recover_open)(struct nfs4_state_owner *, struct nfs4_state *);
 	int (*recover_lock)(struct nfs4_state *, struct file_lock *);
+	int (*establish_clid)(struct nfs_client *, struct rpc_cred *);
+	struct rpc_cred * (*get_clid_cred)(struct nfs_client *);
+};
+
+struct nfs4_state_maintenance_ops {
+	int (*sched_state_renewal)(struct nfs_client *, struct rpc_cred *);
+	struct rpc_cred * (*get_state_renewal_cred_locked)(struct nfs_client *);
+	int (*renew_lease)(struct nfs_client *, struct rpc_cred *);
 };
 
 extern const struct dentry_operations nfs4_dentry_operations;
@@ -193,6 +202,7 @@ extern int nfs4_proc_setclientid(struct nfs_client *, u32, unsigned short, struc
 extern int nfs4_proc_setclientid_confirm(struct nfs_client *, struct rpc_cred *);
 extern int nfs4_proc_async_renew(struct nfs_client *, struct rpc_cred *);
 extern int nfs4_proc_renew(struct nfs_client *, struct rpc_cred *);
+extern int nfs4_init_clientid(struct nfs_client *, struct rpc_cred *);
 extern int nfs4_do_close(struct path *path, struct nfs4_state *state, int wait);
 extern struct dentry *nfs4_atomic_open(struct inode *, struct dentry *, struct nameidata *);
 extern int nfs4_open_revalidate(struct inode *, struct dentry *, int, struct nameidata *);
@@ -200,8 +210,26 @@ extern int nfs4_server_capabilities(struct nfs_server *server, struct nfs_fh *fh
 extern int nfs4_proc_fs_locations(struct inode *dir, const struct qstr *name,
 		struct nfs4_fs_locations *fs_locations, struct page *page);
 
-extern struct nfs4_state_recovery_ops nfs4_reboot_recovery_ops;
-extern struct nfs4_state_recovery_ops nfs4_nograce_recovery_ops;
+extern struct nfs4_state_recovery_ops *nfs4_reboot_recovery_ops[];
+extern struct nfs4_state_recovery_ops *nfs4_nograce_recovery_ops[];
+#if defined(CONFIG_NFS_V4_1)
+extern int nfs4_setup_sequence(struct nfs_client *clp,
+		struct nfs4_sequence_args *args, struct nfs4_sequence_res *res,
+		int cache_reply, struct rpc_task *task);
+extern void nfs4_destroy_session(struct nfs4_session *session);
+extern struct nfs4_session *nfs4_alloc_session(struct nfs_client *clp);
+extern int nfs4_proc_create_session(struct nfs_client *, int reset);
+extern int nfs4_proc_destroy_session(struct nfs4_session *);
+#else /* CONFIG_NFS_v4_1 */
+static inline int nfs4_setup_sequence(struct nfs_client *clp,
+		struct nfs4_sequence_args *args, struct nfs4_sequence_res *res,
+		int cache_reply, struct rpc_task *task)
+{
+	return 0;
+}
+#endif /* CONFIG_NFS_V4_1 */
+
+extern struct nfs4_state_maintenance_ops *nfs4_state_renewal_ops[];
 
 extern const u32 nfs4_fattr_bitmap[2];
 extern const u32 nfs4_statfs_bitmap[2];
@@ -216,7 +244,12 @@ extern void nfs4_kill_renewd(struct nfs_client *);
 extern void nfs4_renew_state(struct work_struct *);
 
 /* nfs4state.c */
+struct rpc_cred *nfs4_get_setclientid_cred(struct nfs_client *clp);
 struct rpc_cred *nfs4_get_renew_cred_locked(struct nfs_client *clp);
+#if defined(CONFIG_NFS_V4_1)
+struct rpc_cred *nfs4_get_machine_cred_locked(struct nfs_client *clp);
+struct rpc_cred *nfs4_get_exchange_id_cred(struct nfs_client *clp);
+#endif /* CONFIG_NFS_V4_1 */
 
 extern struct nfs4_state_owner * nfs4_get_state_owner(struct nfs_server *, struct rpc_cred *);
 extern void nfs4_put_state_owner(struct nfs4_state_owner *);
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 4674f8092da..92ce4351781 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -48,11 +48,14 @@
 #include <linux/smp_lock.h>
 #include <linux/namei.h>
 #include <linux/mount.h>
+#include <linux/module.h>
+#include <linux/sunrpc/bc_xprt.h>
 
 #include "nfs4_fs.h"
 #include "delegation.h"
 #include "internal.h"
 #include "iostat.h"
+#include "callback.h"
 
 #define NFSDBG_FACILITY		NFSDBG_PROC
 
@@ -247,7 +250,25 @@ static int nfs4_handle_exception(const struct nfs_server *server, int errorcode,
 			ret = nfs4_wait_clnt_recover(clp);
 			if (ret == 0)
 				exception->retry = 1;
+#if !defined(CONFIG_NFS_V4_1)
 			break;
+#else /* !defined(CONFIG_NFS_V4_1) */
+			if (!nfs4_has_session(server->nfs_client))
+				break;
+			/* FALLTHROUGH */
+		case -NFS4ERR_BADSESSION:
+		case -NFS4ERR_BADSLOT:
+		case -NFS4ERR_BAD_HIGH_SLOT:
+		case -NFS4ERR_CONN_NOT_BOUND_TO_SESSION:
+		case -NFS4ERR_DEADSESSION:
+		case -NFS4ERR_SEQ_FALSE_RETRY:
+		case -NFS4ERR_SEQ_MISORDERED:
+			dprintk("%s ERROR: %d Reset session\n", __func__,
+				errorcode);
+			set_bit(NFS4CLNT_SESSION_SETUP, &clp->cl_state);
+			exception->retry = 1;
+			/* FALLTHROUGH */
+#endif /* !defined(CONFIG_NFS_V4_1) */
 		case -NFS4ERR_FILE_OPEN:
 		case -NFS4ERR_GRACE:
 		case -NFS4ERR_DELAY:
@@ -271,6 +292,353 @@ static void renew_lease(const struct nfs_server *server, unsigned long timestamp
 	spin_unlock(&clp->cl_lock);
 }
 
+#if defined(CONFIG_NFS_V4_1)
+
+/*
+ * nfs4_free_slot - free a slot and efficiently update slot table.
+ *
+ * freeing a slot is trivially done by clearing its respective bit
+ * in the bitmap.
+ * If the freed slotid equals highest_used_slotid we want to update it
+ * so that the server would be able to size down the slot table if needed,
+ * otherwise we know that the highest_used_slotid is still in use.
+ * When updating highest_used_slotid there may be "holes" in the bitmap
+ * so we need to scan down from highest_used_slotid to 0 looking for the now
+ * highest slotid in use.
+ * If none found, highest_used_slotid is set to -1.
+ */
+static void
+nfs4_free_slot(struct nfs4_slot_table *tbl, u8 free_slotid)
+{
+	int slotid = free_slotid;
+
+	spin_lock(&tbl->slot_tbl_lock);
+	/* clear used bit in bitmap */
+	__clear_bit(slotid, tbl->used_slots);
+
+	/* update highest_used_slotid when it is freed */
+	if (slotid == tbl->highest_used_slotid) {
+		slotid = find_last_bit(tbl->used_slots, tbl->max_slots);
+		if (slotid >= 0 && slotid < tbl->max_slots)
+			tbl->highest_used_slotid = slotid;
+		else
+			tbl->highest_used_slotid = -1;
+	}
+	rpc_wake_up_next(&tbl->slot_tbl_waitq);
+	spin_unlock(&tbl->slot_tbl_lock);
+	dprintk("%s: free_slotid %u highest_used_slotid %d\n", __func__,
+		free_slotid, tbl->highest_used_slotid);
+}
+
+void nfs41_sequence_free_slot(const struct nfs_client *clp,
+			      struct nfs4_sequence_res *res)
+{
+	struct nfs4_slot_table *tbl;
+
+	if (!nfs4_has_session(clp)) {
+		dprintk("%s: No session\n", __func__);
+		return;
+	}
+	tbl = &clp->cl_session->fc_slot_table;
+	if (res->sr_slotid == NFS4_MAX_SLOT_TABLE) {
+		dprintk("%s: No slot\n", __func__);
+		/* just wake up the next guy waiting since
+		 * we may have not consumed a slot after all */
+		rpc_wake_up_next(&tbl->slot_tbl_waitq);
+		return;
+	}
+	nfs4_free_slot(tbl, res->sr_slotid);
+	res->sr_slotid = NFS4_MAX_SLOT_TABLE;
+}
+
+static void nfs41_sequence_done(struct nfs_client *clp,
+				struct nfs4_sequence_res *res,
+				int rpc_status)
+{
+	unsigned long timestamp;
+	struct nfs4_slot_table *tbl;
+	struct nfs4_slot *slot;
+
+	/*
+	 * sr_status remains 1 if an RPC level error occurred. The server
+	 * may or may not have processed the sequence operation..
+	 * Proceed as if the server received and processed the sequence
+	 * operation.
+	 */
+	if (res->sr_status == 1)
+		res->sr_status = NFS_OK;
+
+	/* -ERESTARTSYS can result in skipping nfs41_sequence_setup */
+	if (res->sr_slotid == NFS4_MAX_SLOT_TABLE)
+		goto out;
+
+	tbl = &clp->cl_session->fc_slot_table;
+	slot = tbl->slots + res->sr_slotid;
+
+	if (res->sr_status == 0) {
+		/* Update the slot's sequence and clientid lease timer */
+		++slot->seq_nr;
+		timestamp = res->sr_renewal_time;
+		spin_lock(&clp->cl_lock);
+		if (time_before(clp->cl_last_renewal, timestamp))
+			clp->cl_last_renewal = timestamp;
+		spin_unlock(&clp->cl_lock);
+		return;
+	}
+out:
+	/* The session may be reset by one of the error handlers. */
+	dprintk("%s: Error %d free the slot \n", __func__, res->sr_status);
+	nfs41_sequence_free_slot(clp, res);
+}
+
+/*
+ * nfs4_find_slot - efficiently look for a free slot
+ *
+ * nfs4_find_slot looks for an unset bit in the used_slots bitmap.
+ * If found, we mark the slot as used, update the highest_used_slotid,
+ * and respectively set up the sequence operation args.
+ * The slot number is returned if found, or NFS4_MAX_SLOT_TABLE otherwise.
+ *
+ * Note: must be called with under the slot_tbl_lock.
+ */
+static u8
+nfs4_find_slot(struct nfs4_slot_table *tbl, struct rpc_task *task)
+{
+	int slotid;
+	u8 ret_id = NFS4_MAX_SLOT_TABLE;
+	BUILD_BUG_ON((u8)NFS4_MAX_SLOT_TABLE != (int)NFS4_MAX_SLOT_TABLE);
+
+	dprintk("--> %s used_slots=%04lx highest_used=%d max_slots=%d\n",
+		__func__, tbl->used_slots[0], tbl->highest_used_slotid,
+		tbl->max_slots);
+	slotid = find_first_zero_bit(tbl->used_slots, tbl->max_slots);
+	if (slotid >= tbl->max_slots)
+		goto out;
+	__set_bit(slotid, tbl->used_slots);
+	if (slotid > tbl->highest_used_slotid)
+		tbl->highest_used_slotid = slotid;
+	ret_id = slotid;
+out:
+	dprintk("<-- %s used_slots=%04lx highest_used=%d slotid=%d \n",
+		__func__, tbl->used_slots[0], tbl->highest_used_slotid, ret_id);
+	return ret_id;
+}
+
+static int nfs4_recover_session(struct nfs4_session *session)
+{
+	struct nfs_client *clp = session->clp;
+	int ret;
+
+	for (;;) {
+		ret = nfs4_wait_clnt_recover(clp);
+		if (ret != 0)
+				return ret;
+		if (!test_bit(NFS4CLNT_SESSION_SETUP, &clp->cl_state))
+			break;
+		nfs4_schedule_state_manager(clp);
+	}
+	return 0;
+}
+
+static int nfs41_setup_sequence(struct nfs4_session *session,
+				struct nfs4_sequence_args *args,
+				struct nfs4_sequence_res *res,
+				int cache_reply,
+				struct rpc_task *task)
+{
+	struct nfs4_slot *slot;
+	struct nfs4_slot_table *tbl;
+	int status = 0;
+	u8 slotid;
+
+	dprintk("--> %s\n", __func__);
+	/* slot already allocated? */
+	if (res->sr_slotid != NFS4_MAX_SLOT_TABLE)
+		return 0;
+
+	memset(res, 0, sizeof(*res));
+	res->sr_slotid = NFS4_MAX_SLOT_TABLE;
+	tbl = &session->fc_slot_table;
+
+	spin_lock(&tbl->slot_tbl_lock);
+	if (test_bit(NFS4CLNT_SESSION_SETUP, &session->clp->cl_state)) {
+		if (tbl->highest_used_slotid != -1) {
+			rpc_sleep_on(&tbl->slot_tbl_waitq, task, NULL);
+			spin_unlock(&tbl->slot_tbl_lock);
+			dprintk("<-- %s: Session reset: draining\n", __func__);
+			return -EAGAIN;
+		}
+
+		/* The slot table is empty; start the reset thread */
+		dprintk("%s Session Reset\n", __func__);
+		spin_unlock(&tbl->slot_tbl_lock);
+		status = nfs4_recover_session(session);
+		if (status)
+			return status;
+		spin_lock(&tbl->slot_tbl_lock);
+	}
+
+	slotid = nfs4_find_slot(tbl, task);
+	if (slotid == NFS4_MAX_SLOT_TABLE) {
+		rpc_sleep_on(&tbl->slot_tbl_waitq, task, NULL);
+		spin_unlock(&tbl->slot_tbl_lock);
+		dprintk("<-- %s: no free slots\n", __func__);
+		return -EAGAIN;
+	}
+	spin_unlock(&tbl->slot_tbl_lock);
+
+	slot = tbl->slots + slotid;
+	args->sa_session = session;
+	args->sa_slotid = slotid;
+	args->sa_cache_this = cache_reply;
+
+	dprintk("<-- %s slotid=%d seqid=%d\n", __func__, slotid, slot->seq_nr);
+
+	res->sr_session = session;
+	res->sr_slotid = slotid;
+	res->sr_renewal_time = jiffies;
+	/*
+	 * sr_status is only set in decode_sequence, and so will remain
+	 * set to 1 if an rpc level failure occurs.
+	 */
+	res->sr_status = 1;
+	return 0;
+}
+
+int nfs4_setup_sequence(struct nfs_client *clp,
+			struct nfs4_sequence_args *args,
+			struct nfs4_sequence_res *res,
+			int cache_reply,
+			struct rpc_task *task)
+{
+	int ret = 0;
+
+	dprintk("--> %s clp %p session %p sr_slotid %d\n",
+		__func__, clp, clp->cl_session, res->sr_slotid);
+
+	if (!nfs4_has_session(clp))
+		goto out;
+	ret = nfs41_setup_sequence(clp->cl_session, args, res, cache_reply,
+				   task);
+	if (ret != -EAGAIN) {
+		/* terminate rpc task */
+		task->tk_status = ret;
+		task->tk_action = NULL;
+	}
+out:
+	dprintk("<-- %s status=%d\n", __func__, ret);
+	return ret;
+}
+
+struct nfs41_call_sync_data {
+	struct nfs_client *clp;
+	struct nfs4_sequence_args *seq_args;
+	struct nfs4_sequence_res *seq_res;
+	int cache_reply;
+};
+
+static void nfs41_call_sync_prepare(struct rpc_task *task, void *calldata)
+{
+	struct nfs41_call_sync_data *data = calldata;
+
+	dprintk("--> %s data->clp->cl_session %p\n", __func__,
+		data->clp->cl_session);
+	if (nfs4_setup_sequence(data->clp, data->seq_args,
+				data->seq_res, data->cache_reply, task))
+		return;
+	rpc_call_start(task);
+}
+
+static void nfs41_call_sync_done(struct rpc_task *task, void *calldata)
+{
+	struct nfs41_call_sync_data *data = calldata;
+
+	nfs41_sequence_done(data->clp, data->seq_res, task->tk_status);
+	nfs41_sequence_free_slot(data->clp, data->seq_res);
+}
+
+struct rpc_call_ops nfs41_call_sync_ops = {
+	.rpc_call_prepare = nfs41_call_sync_prepare,
+	.rpc_call_done = nfs41_call_sync_done,
+};
+
+static int nfs4_call_sync_sequence(struct nfs_client *clp,
+				   struct rpc_clnt *clnt,
+				   struct rpc_message *msg,
+				   struct nfs4_sequence_args *args,
+				   struct nfs4_sequence_res *res,
+				   int cache_reply)
+{
+	int ret;
+	struct rpc_task *task;
+	struct nfs41_call_sync_data data = {
+		.clp = clp,
+		.seq_args = args,
+		.seq_res = res,
+		.cache_reply = cache_reply,
+	};
+	struct rpc_task_setup task_setup = {
+		.rpc_client = clnt,
+		.rpc_message = msg,
+		.callback_ops = &nfs41_call_sync_ops,
+		.callback_data = &data
+	};
+
+	res->sr_slotid = NFS4_MAX_SLOT_TABLE;
+	task = rpc_run_task(&task_setup);
+	if (IS_ERR(task))
+		ret = PTR_ERR(task);
+	else {
+		ret = task->tk_status;
+		rpc_put_task(task);
+	}
+	return ret;
+}
+
+int _nfs4_call_sync_session(struct nfs_server *server,
+			    struct rpc_message *msg,
+			    struct nfs4_sequence_args *args,
+			    struct nfs4_sequence_res *res,
+			    int cache_reply)
+{
+	return nfs4_call_sync_sequence(server->nfs_client, server->client,
+				       msg, args, res, cache_reply);
+}
+
+#endif /* CONFIG_NFS_V4_1 */
+
+int _nfs4_call_sync(struct nfs_server *server,
+		    struct rpc_message *msg,
+		    struct nfs4_sequence_args *args,
+		    struct nfs4_sequence_res *res,
+		    int cache_reply)
+{
+	args->sa_session = res->sr_session = NULL;
+	return rpc_call_sync(server->client, msg, 0);
+}
+
+#define nfs4_call_sync(server, msg, args, res, cache_reply) \
+	(server)->nfs_client->cl_call_sync((server), (msg), &(args)->seq_args, \
+			&(res)->seq_res, (cache_reply))
+
+static void nfs4_sequence_done(const struct nfs_server *server,
+			       struct nfs4_sequence_res *res, int rpc_status)
+{
+#ifdef CONFIG_NFS_V4_1
+	if (nfs4_has_session(server->nfs_client))
+		nfs41_sequence_done(server->nfs_client, res, rpc_status);
+#endif /* CONFIG_NFS_V4_1 */
+}
+
+/* no restart, therefore free slot here */
+static void nfs4_sequence_done_free_slot(const struct nfs_server *server,
+					 struct nfs4_sequence_res *res,
+					 int rpc_status)
+{
+	nfs4_sequence_done(server, res, rpc_status);
+	nfs4_sequence_free_slot(server->nfs_client, res);
+}
+
 static void update_changeattr(struct inode *dir, struct nfs4_change_info *cinfo)
 {
 	struct nfs_inode *nfsi = NFS_I(dir);
@@ -312,6 +680,7 @@ static void nfs4_init_opendata_res(struct nfs4_opendata *p)
 	p->o_res.server = p->o_arg.server;
 	nfs_fattr_init(&p->f_attr);
 	nfs_fattr_init(&p->dir_attr);
+	p->o_res.seq_res.sr_slotid = NFS4_MAX_SLOT_TABLE;
 }
 
 static struct nfs4_opendata *nfs4_opendata_alloc(struct path *path,
@@ -804,16 +1173,30 @@ int nfs4_open_delegation_recall(struct nfs_open_context *ctx, struct nfs4_state
 		err = _nfs4_open_delegation_recall(ctx, state, stateid);
 		switch (err) {
 			case 0:
-				return err;
+			case -ENOENT:
+			case -ESTALE:
+				goto out;
 			case -NFS4ERR_STALE_CLIENTID:
 			case -NFS4ERR_STALE_STATEID:
 			case -NFS4ERR_EXPIRED:
 				/* Don't recall a delegation if it was lost */
 				nfs4_schedule_state_recovery(server->nfs_client);
-				return err;
+				goto out;
+			case -ERESTARTSYS:
+				/*
+				 * The show must go on: exit, but mark the
+				 * stateid as needing recovery.
+				 */
+			case -NFS4ERR_ADMIN_REVOKED:
+			case -NFS4ERR_BAD_STATEID:
+				nfs4_state_mark_reclaim_nograce(server->nfs_client, state);
+			case -ENOMEM:
+				err = 0;
+				goto out;
 		}
 		err = nfs4_handle_exception(server, err, &exception);
 	} while (exception.retry);
+out:
 	return err;
 }
 
@@ -929,6 +1312,10 @@ static void nfs4_open_prepare(struct rpc_task *task, void *calldata)
 		nfs_copy_fh(&data->o_res.fh, data->o_arg.fh);
 	}
 	data->timestamp = jiffies;
+	if (nfs4_setup_sequence(data->o_arg.server->nfs_client,
+				&data->o_arg.seq_args,
+				&data->o_res.seq_res, 1, task))
+		return;
 	rpc_call_start(task);
 	return;
 out_no_action:
@@ -941,6 +1328,10 @@ static void nfs4_open_done(struct rpc_task *task, void *calldata)
 	struct nfs4_opendata *data = calldata;
 
 	data->rpc_status = task->tk_status;
+
+	nfs4_sequence_done_free_slot(data->o_arg.server, &data->o_res.seq_res,
+				     task->tk_status);
+
 	if (RPC_ASSASSINATED(task))
 		return;
 	if (task->tk_status == 0) {
@@ -1269,7 +1660,7 @@ static int _nfs4_do_setattr(struct inode *inode, struct rpc_cred *cred,
 	} else
 		memcpy(&arg.stateid, &zero_stateid, sizeof(arg.stateid));
 
-	status = rpc_call_sync(server->client, &msg, 0);
+	status = nfs4_call_sync(server, &msg, &arg, &res, 1);
 	if (status == 0 && state != NULL)
 		renew_lease(server, timestamp);
 	return status;
@@ -1318,6 +1709,7 @@ static void nfs4_close_done(struct rpc_task *task, void *data)
 	struct nfs4_state *state = calldata->state;
 	struct nfs_server *server = NFS_SERVER(calldata->inode);
 
+	nfs4_sequence_done(server, &calldata->res.seq_res, task->tk_status);
 	if (RPC_ASSASSINATED(task))
 		return;
         /* hmm. we are done with the inode, and in the process of freeing
@@ -1336,10 +1728,11 @@ static void nfs4_close_done(struct rpc_task *task, void *data)
 				break;
 		default:
 			if (nfs4_async_handle_error(task, server, state) == -EAGAIN) {
-				rpc_restart_call(task);
+				nfs4_restart_rpc(task, server->nfs_client);
 				return;
 			}
 	}
+	nfs4_sequence_free_slot(server->nfs_client, &calldata->res.seq_res);
 	nfs_refresh_inode(calldata->inode, calldata->res.fattr);
 }
 
@@ -1380,6 +1773,10 @@ static void nfs4_close_prepare(struct rpc_task *task, void *data)
 		calldata->arg.fmode = FMODE_WRITE;
 	}
 	calldata->timestamp = jiffies;
+	if (nfs4_setup_sequence((NFS_SERVER(calldata->inode))->nfs_client,
+				&calldata->arg.seq_args, &calldata->res.seq_res,
+				1, task))
+		return;
 	rpc_call_start(task);
 }
 
@@ -1419,13 +1816,15 @@ int nfs4_do_close(struct path *path, struct nfs4_state *state, int wait)
 	};
 	int status = -ENOMEM;
 
-	calldata = kmalloc(sizeof(*calldata), GFP_KERNEL);
+	calldata = kzalloc(sizeof(*calldata), GFP_KERNEL);
 	if (calldata == NULL)
 		goto out;
 	calldata->inode = state->inode;
 	calldata->state = state;
 	calldata->arg.fh = NFS_FH(state->inode);
 	calldata->arg.stateid = &state->open_stateid;
+	if (nfs4_has_session(server->nfs_client))
+		memset(calldata->arg.stateid->data, 0, 4);    /* clear seqid */
 	/* Serialization for the sequence id */
 	calldata->arg.seqid = nfs_alloc_seqid(&state->owner->so_seqid);
 	if (calldata->arg.seqid == NULL)
@@ -1435,6 +1834,7 @@ int nfs4_do_close(struct path *path, struct nfs4_state *state, int wait)
 	calldata->res.fattr = &calldata->fattr;
 	calldata->res.seqid = calldata->arg.seqid;
 	calldata->res.server = server;
+	calldata->res.seq_res.sr_slotid = NFS4_MAX_SLOT_TABLE;
 	calldata->path.mnt = mntget(path->mnt);
 	calldata->path.dentry = dget(path->dentry);
 
@@ -1584,15 +1984,18 @@ void nfs4_close_context(struct nfs_open_context *ctx, int is_sync)
 
 static int _nfs4_server_capabilities(struct nfs_server *server, struct nfs_fh *fhandle)
 {
+	struct nfs4_server_caps_arg args = {
+		.fhandle = fhandle,
+	};
 	struct nfs4_server_caps_res res = {};
 	struct rpc_message msg = {
 		.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_SERVER_CAPS],
-		.rpc_argp = fhandle,
+		.rpc_argp = &args,
 		.rpc_resp = &res,
 	};
 	int status;
 
-	status = rpc_call_sync(server->client, &msg, 0);
+	status = nfs4_call_sync(server, &msg, &args, &res, 0);
 	if (status == 0) {
 		memcpy(server->attr_bitmask, res.attr_bitmask, sizeof(server->attr_bitmask));
 		if (res.attr_bitmask[0] & FATTR4_WORD0_ACL)
@@ -1606,6 +2009,7 @@ static int _nfs4_server_capabilities(struct nfs_server *server, struct nfs_fh *f
 		server->cache_consistency_bitmask[1] &= FATTR4_WORD1_TIME_METADATA|FATTR4_WORD1_TIME_MODIFY;
 		server->acl_bitmask = res.acl_bitmask;
 	}
+
 	return status;
 }
 
@@ -1637,8 +2041,15 @@ static int _nfs4_lookup_root(struct nfs_server *server, struct nfs_fh *fhandle,
 		.rpc_argp = &args,
 		.rpc_resp = &res,
 	};
+	int status;
+
 	nfs_fattr_init(info->fattr);
-	return rpc_call_sync(server->client, &msg, 0);
+	status = nfs4_recover_expired_lease(server);
+	if (!status)
+		status = nfs4_check_client_ready(server->nfs_client);
+	if (!status)
+		status = nfs4_call_sync(server, &msg, &args, &res, 0);
+	return status;
 }
 
 static int nfs4_lookup_root(struct nfs_server *server, struct nfs_fh *fhandle,
@@ -1728,7 +2139,7 @@ static int _nfs4_proc_getattr(struct nfs_server *server, struct nfs_fh *fhandle,
 	};
 	
 	nfs_fattr_init(fattr);
-	return rpc_call_sync(server->client, &msg, 0);
+	return nfs4_call_sync(server, &msg, &args, &res, 0);
 }
 
 static int nfs4_proc_getattr(struct nfs_server *server, struct nfs_fh *fhandle, struct nfs_fattr *fattr)
@@ -1812,7 +2223,7 @@ static int _nfs4_proc_lookupfh(struct nfs_server *server, const struct nfs_fh *d
 	nfs_fattr_init(fattr);
 
 	dprintk("NFS call  lookupfh %s\n", name->name);
-	status = rpc_call_sync(server->client, &msg, 0);
+	status = nfs4_call_sync(server, &msg, &args, &res, 0);
 	dprintk("NFS reply lookupfh: %d\n", status);
 	return status;
 }
@@ -1898,7 +2309,7 @@ static int _nfs4_proc_access(struct inode *inode, struct nfs_access_entry *entry
 			args.access |= NFS4_ACCESS_EXECUTE;
 	}
 	nfs_fattr_init(&fattr);
-	status = rpc_call_sync(NFS_CLIENT(inode), &msg, 0);
+	status = nfs4_call_sync(server, &msg, &args, &res, 0);
 	if (!status) {
 		entry->mask = 0;
 		if (res.access & NFS4_ACCESS_READ)
@@ -1957,13 +2368,14 @@ static int _nfs4_proc_readlink(struct inode *inode, struct page *page,
 		.pglen    = pglen,
 		.pages    = &page,
 	};
+	struct nfs4_readlink_res res;
 	struct rpc_message msg = {
 		.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_READLINK],
 		.rpc_argp = &args,
-		.rpc_resp = NULL,
+		.rpc_resp = &res,
 	};
 
-	return rpc_call_sync(NFS_CLIENT(inode), &msg, 0);
+	return nfs4_call_sync(NFS_SERVER(inode), &msg, &args, &res, 0);
 }
 
 static int nfs4_proc_readlink(struct inode *inode, struct page *page,
@@ -2057,7 +2469,7 @@ static int _nfs4_proc_remove(struct inode *dir, struct qstr *name)
 	int			status;
 
 	nfs_fattr_init(&res.dir_attr);
-	status = rpc_call_sync(server->client, &msg, 0);
+	status = nfs4_call_sync(server, &msg, &args, &res, 1);
 	if (status == 0) {
 		update_changeattr(dir, &res.cinfo);
 		nfs_post_op_update_inode(dir, &res.dir_attr);
@@ -2092,8 +2504,10 @@ static int nfs4_proc_unlink_done(struct rpc_task *task, struct inode *dir)
 {
 	struct nfs_removeres *res = task->tk_msg.rpc_resp;
 
+	nfs4_sequence_done(res->server, &res->seq_res, task->tk_status);
 	if (nfs4_async_handle_error(task, res->server, NULL) == -EAGAIN)
 		return 0;
+	nfs4_sequence_free_slot(res->server->nfs_client, &res->seq_res);
 	update_changeattr(dir, &res->cinfo);
 	nfs_post_op_update_inode(dir, &res->dir_attr);
 	return 1;
@@ -2125,7 +2539,7 @@ static int _nfs4_proc_rename(struct inode *old_dir, struct qstr *old_name,
 	
 	nfs_fattr_init(res.old_fattr);
 	nfs_fattr_init(res.new_fattr);
-	status = rpc_call_sync(server->client, &msg, 0);
+	status = nfs4_call_sync(server, &msg, &arg, &res, 1);
 
 	if (!status) {
 		update_changeattr(old_dir, &res.old_cinfo);
@@ -2174,7 +2588,7 @@ static int _nfs4_proc_link(struct inode *inode, struct inode *dir, struct qstr *
 
 	nfs_fattr_init(res.fattr);
 	nfs_fattr_init(res.dir_attr);
-	status = rpc_call_sync(server->client, &msg, 0);
+	status = nfs4_call_sync(server, &msg, &arg, &res, 1);
 	if (!status) {
 		update_changeattr(dir, &res.cinfo);
 		nfs_post_op_update_inode(dir, res.dir_attr);
@@ -2235,7 +2649,8 @@ static struct nfs4_createdata *nfs4_alloc_createdata(struct inode *dir,
 
 static int nfs4_do_create(struct inode *dir, struct dentry *dentry, struct nfs4_createdata *data)
 {
-	int status = rpc_call_sync(NFS_CLIENT(dir), &data->msg, 0);
+	int status = nfs4_call_sync(NFS_SERVER(dir), &data->msg,
+				    &data->arg, &data->res, 1);
 	if (status == 0) {
 		update_changeattr(dir, &data->res.dir_cinfo);
 		nfs_post_op_update_inode(dir, data->res.dir_fattr);
@@ -2344,7 +2759,7 @@ static int _nfs4_proc_readdir(struct dentry *dentry, struct rpc_cred *cred,
 			(unsigned long long)cookie);
 	nfs4_setup_readdir(cookie, NFS_COOKIEVERF(dir), dentry, &args);
 	res.pgbase = args.pgbase;
-	status = rpc_call_sync(NFS_CLIENT(dir), &msg, 0);
+	status = nfs4_call_sync(NFS_SERVER(dir), &msg, &args, &res, 0);
 	if (status == 0)
 		memcpy(NFS_COOKIEVERF(dir), res.verifier.data, NFS4_VERIFIER_SIZE);
 
@@ -2422,14 +2837,17 @@ static int _nfs4_proc_statfs(struct nfs_server *server, struct nfs_fh *fhandle,
 		.fh = fhandle,
 		.bitmask = server->attr_bitmask,
 	};
+	struct nfs4_statfs_res res = {
+		.fsstat = fsstat,
+	};
 	struct rpc_message msg = {
 		.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_STATFS],
 		.rpc_argp = &args,
-		.rpc_resp = fsstat,
+		.rpc_resp = &res,
 	};
 
 	nfs_fattr_init(fsstat->fattr);
-	return rpc_call_sync(server->client, &msg, 0);
+	return  nfs4_call_sync(server, &msg, &args, &res, 0);
 }
 
 static int nfs4_proc_statfs(struct nfs_server *server, struct nfs_fh *fhandle, struct nfs_fsstat *fsstat)
@@ -2451,13 +2869,16 @@ static int _nfs4_do_fsinfo(struct nfs_server *server, struct nfs_fh *fhandle,
 		.fh = fhandle,
 		.bitmask = server->attr_bitmask,
 	};
+	struct nfs4_fsinfo_res res = {
+		.fsinfo = fsinfo,
+	};
 	struct rpc_message msg = {
 		.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_FSINFO],
 		.rpc_argp = &args,
-		.rpc_resp = fsinfo,
+		.rpc_resp = &res,
 	};
 
-	return rpc_call_sync(server->client, &msg, 0);
+	return nfs4_call_sync(server, &msg, &args, &res, 0);
 }
 
 static int nfs4_do_fsinfo(struct nfs_server *server, struct nfs_fh *fhandle, struct nfs_fsinfo *fsinfo)
@@ -2486,10 +2907,13 @@ static int _nfs4_proc_pathconf(struct nfs_server *server, struct nfs_fh *fhandle
 		.fh = fhandle,
 		.bitmask = server->attr_bitmask,
 	};
+	struct nfs4_pathconf_res res = {
+		.pathconf = pathconf,
+	};
 	struct rpc_message msg = {
 		.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_PATHCONF],
 		.rpc_argp = &args,
-		.rpc_resp = pathconf,
+		.rpc_resp = &res,
 	};
 
 	/* None of the pathconf attributes are mandatory to implement */
@@ -2499,7 +2923,7 @@ static int _nfs4_proc_pathconf(struct nfs_server *server, struct nfs_fh *fhandle
 	}
 
 	nfs_fattr_init(pathconf->fattr);
-	return rpc_call_sync(server->client, &msg, 0);
+	return nfs4_call_sync(server, &msg, &args, &res, 0);
 }
 
 static int nfs4_proc_pathconf(struct nfs_server *server, struct nfs_fh *fhandle,
@@ -2520,8 +2944,13 @@ static int nfs4_read_done(struct rpc_task *task, struct nfs_read_data *data)
 {
 	struct nfs_server *server = NFS_SERVER(data->inode);
 
+	dprintk("--> %s\n", __func__);
+
+	/* nfs4_sequence_free_slot called in the read rpc_call_done */
+	nfs4_sequence_done(server, &data->res.seq_res, task->tk_status);
+
 	if (nfs4_async_handle_error(task, server, data->args.context->state) == -EAGAIN) {
-		rpc_restart_call(task);
+		nfs4_restart_rpc(task, server->nfs_client);
 		return -EAGAIN;
 	}
 
@@ -2541,8 +2970,12 @@ static int nfs4_write_done(struct rpc_task *task, struct nfs_write_data *data)
 {
 	struct inode *inode = data->inode;
 	
+	/* slot is freed in nfs_writeback_done */
+	nfs4_sequence_done(NFS_SERVER(inode), &data->res.seq_res,
+			   task->tk_status);
+
 	if (nfs4_async_handle_error(task, NFS_SERVER(inode), data->args.context->state) == -EAGAIN) {
-		rpc_restart_call(task);
+		nfs4_restart_rpc(task, NFS_SERVER(inode)->nfs_client);
 		return -EAGAIN;
 	}
 	if (task->tk_status >= 0) {
@@ -2567,10 +3000,14 @@ static int nfs4_commit_done(struct rpc_task *task, struct nfs_write_data *data)
 {
 	struct inode *inode = data->inode;
 	
+	nfs4_sequence_done(NFS_SERVER(inode), &data->res.seq_res,
+			   task->tk_status);
 	if (nfs4_async_handle_error(task, NFS_SERVER(inode), NULL) == -EAGAIN) {
-		rpc_restart_call(task);
+		nfs4_restart_rpc(task, NFS_SERVER(inode)->nfs_client);
 		return -EAGAIN;
 	}
+	nfs4_sequence_free_slot(NFS_SERVER(inode)->nfs_client,
+				&data->res.seq_res);
 	nfs_refresh_inode(inode, data->res.fattr);
 	return 0;
 }
@@ -2603,6 +3040,9 @@ static void nfs4_renew_done(struct rpc_task *task, void *data)
 	if (time_before(clp->cl_last_renewal,timestamp))
 		clp->cl_last_renewal = timestamp;
 	spin_unlock(&clp->cl_lock);
+	dprintk("%s calling put_rpccred on rpc_cred %p\n", __func__,
+				task->tk_msg.rpc_cred);
+	put_rpccred(task->tk_msg.rpc_cred);
 }
 
 static const struct rpc_call_ops nfs4_renew_ops = {
@@ -2742,12 +3182,14 @@ static ssize_t __nfs4_get_acl_uncached(struct inode *inode, void *buf, size_t bu
 		.acl_pages = pages,
 		.acl_len = buflen,
 	};
-	size_t resp_len = buflen;
+	struct nfs_getaclres res = {
+		.acl_len = buflen,
+	};
 	void *resp_buf;
 	struct rpc_message msg = {
 		.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_GETACL],
 		.rpc_argp = &args,
-		.rpc_resp = &resp_len,
+		.rpc_resp = &res,
 	};
 	struct page *localpage = NULL;
 	int ret;
@@ -2761,26 +3203,26 @@ static ssize_t __nfs4_get_acl_uncached(struct inode *inode, void *buf, size_t bu
 			return -ENOMEM;
 		args.acl_pages[0] = localpage;
 		args.acl_pgbase = 0;
-		resp_len = args.acl_len = PAGE_SIZE;
+		args.acl_len = PAGE_SIZE;
 	} else {
 		resp_buf = buf;
 		buf_to_pages(buf, buflen, args.acl_pages, &args.acl_pgbase);
 	}
-	ret = rpc_call_sync(NFS_CLIENT(inode), &msg, 0);
+	ret = nfs4_call_sync(NFS_SERVER(inode), &msg, &args, &res, 0);
 	if (ret)
 		goto out_free;
-	if (resp_len > args.acl_len)
-		nfs4_write_cached_acl(inode, NULL, resp_len);
+	if (res.acl_len > args.acl_len)
+		nfs4_write_cached_acl(inode, NULL, res.acl_len);
 	else
-		nfs4_write_cached_acl(inode, resp_buf, resp_len);
+		nfs4_write_cached_acl(inode, resp_buf, res.acl_len);
 	if (buf) {
 		ret = -ERANGE;
-		if (resp_len > buflen)
+		if (res.acl_len > buflen)
 			goto out_free;
 		if (localpage)
-			memcpy(buf, resp_buf, resp_len);
+			memcpy(buf, resp_buf, res.acl_len);
 	}
-	ret = resp_len;
+	ret = res.acl_len;
 out_free:
 	if (localpage)
 		__free_page(localpage);
@@ -2810,8 +3252,6 @@ static ssize_t nfs4_proc_get_acl(struct inode *inode, void *buf, size_t buflen)
 	ret = nfs_revalidate_inode(server, inode);
 	if (ret < 0)
 		return ret;
-	if (NFS_I(inode)->cache_validity & NFS_INO_INVALID_ACL)
-		nfs_zap_acl_cache(inode);
 	ret = nfs4_read_cached_acl(inode, buf, buflen);
 	if (ret != -ENOENT)
 		return ret;
@@ -2827,10 +3267,11 @@ static int __nfs4_proc_set_acl(struct inode *inode, const void *buf, size_t bufl
 		.acl_pages	= pages,
 		.acl_len	= buflen,
 	};
+	struct nfs_setaclres res;
 	struct rpc_message msg = {
 		.rpc_proc	= &nfs4_procedures[NFSPROC4_CLNT_SETACL],
 		.rpc_argp	= &arg,
-		.rpc_resp	= NULL,
+		.rpc_resp	= &res,
 	};
 	int ret;
 
@@ -2838,7 +3279,7 @@ static int __nfs4_proc_set_acl(struct inode *inode, const void *buf, size_t bufl
 		return -EOPNOTSUPP;
 	nfs_inode_return_delegation(inode);
 	buf_to_pages(buf, buflen, arg.acl_pages, &arg.acl_pgbase);
-	ret = rpc_call_sync(NFS_CLIENT(inode), &msg, 0);
+	ret = nfs4_call_sync(server, &msg, &arg, &res, 1);
 	nfs_access_zap_cache(inode);
 	nfs_zap_acl_cache(inode);
 	return ret;
@@ -2857,10 +3298,8 @@ static int nfs4_proc_set_acl(struct inode *inode, const void *buf, size_t buflen
 }
 
 static int
-nfs4_async_handle_error(struct rpc_task *task, const struct nfs_server *server, struct nfs4_state *state)
+_nfs4_async_handle_error(struct rpc_task *task, const struct nfs_server *server, struct nfs_client *clp, struct nfs4_state *state)
 {
-	struct nfs_client *clp = server->nfs_client;
-
 	if (!clp || task->tk_status >= 0)
 		return 0;
 	switch(task->tk_status) {
@@ -2879,8 +3318,23 @@ nfs4_async_handle_error(struct rpc_task *task, const struct nfs_server *server,
 				rpc_wake_up_queued_task(&clp->cl_rpcwaitq, task);
 			task->tk_status = 0;
 			return -EAGAIN;
+#if defined(CONFIG_NFS_V4_1)
+		case -NFS4ERR_BADSESSION:
+		case -NFS4ERR_BADSLOT:
+		case -NFS4ERR_BAD_HIGH_SLOT:
+		case -NFS4ERR_DEADSESSION:
+		case -NFS4ERR_CONN_NOT_BOUND_TO_SESSION:
+		case -NFS4ERR_SEQ_FALSE_RETRY:
+		case -NFS4ERR_SEQ_MISORDERED:
+			dprintk("%s ERROR %d, Reset session\n", __func__,
+				task->tk_status);
+			set_bit(NFS4CLNT_SESSION_SETUP, &clp->cl_state);
+			task->tk_status = 0;
+			return -EAGAIN;
+#endif /* CONFIG_NFS_V4_1 */
 		case -NFS4ERR_DELAY:
-			nfs_inc_server_stats(server, NFSIOS_DELAY);
+			if (server)
+				nfs_inc_server_stats(server, NFSIOS_DELAY);
 		case -NFS4ERR_GRACE:
 			rpc_delay(task, NFS4_POLL_RETRY_MAX);
 			task->tk_status = 0;
@@ -2893,6 +3347,12 @@ nfs4_async_handle_error(struct rpc_task *task, const struct nfs_server *server,
 	return 0;
 }
 
+static int
+nfs4_async_handle_error(struct rpc_task *task, const struct nfs_server *server, struct nfs4_state *state)
+{
+	return _nfs4_async_handle_error(task, server, server->nfs_client, state);
+}
+
 int nfs4_proc_setclientid(struct nfs_client *clp, u32 program, unsigned short port, struct rpc_cred *cred)
 {
 	nfs4_verifier sc_verifier;
@@ -3000,6 +3460,10 @@ struct nfs4_delegreturndata {
 static void nfs4_delegreturn_done(struct rpc_task *task, void *calldata)
 {
 	struct nfs4_delegreturndata *data = calldata;
+
+	nfs4_sequence_done_free_slot(data->res.server, &data->res.seq_res,
+				     task->tk_status);
+
 	data->rpc_status = task->tk_status;
 	if (data->rpc_status == 0)
 		renew_lease(data->res.server, data->timestamp);
@@ -3010,7 +3474,25 @@ static void nfs4_delegreturn_release(void *calldata)
 	kfree(calldata);
 }
 
+#if defined(CONFIG_NFS_V4_1)
+static void nfs4_delegreturn_prepare(struct rpc_task *task, void *data)
+{
+	struct nfs4_delegreturndata *d_data;
+
+	d_data = (struct nfs4_delegreturndata *)data;
+
+	if (nfs4_setup_sequence(d_data->res.server->nfs_client,
+				&d_data->args.seq_args,
+				&d_data->res.seq_res, 1, task))
+		return;
+	rpc_call_start(task);
+}
+#endif /* CONFIG_NFS_V4_1 */
+
 static const struct rpc_call_ops nfs4_delegreturn_ops = {
+#if defined(CONFIG_NFS_V4_1)
+	.rpc_call_prepare = nfs4_delegreturn_prepare,
+#endif /* CONFIG_NFS_V4_1 */
 	.rpc_call_done = nfs4_delegreturn_done,
 	.rpc_release = nfs4_delegreturn_release,
 };
@@ -3032,7 +3514,7 @@ static int _nfs4_proc_delegreturn(struct inode *inode, struct rpc_cred *cred, co
 	};
 	int status = 0;
 
-	data = kmalloc(sizeof(*data), GFP_KERNEL);
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
 	if (data == NULL)
 		return -ENOMEM;
 	data->args.fhandle = &data->fh;
@@ -3042,6 +3524,7 @@ static int _nfs4_proc_delegreturn(struct inode *inode, struct rpc_cred *cred, co
 	memcpy(&data->stateid, stateid, sizeof(data->stateid));
 	data->res.fattr = &data->fattr;
 	data->res.server = server;
+	data->res.seq_res.sr_slotid = NFS4_MAX_SLOT_TABLE;
 	nfs_fattr_init(data->res.fattr);
 	data->timestamp = jiffies;
 	data->rpc_status = 0;
@@ -3127,7 +3610,7 @@ static int _nfs4_proc_getlk(struct nfs4_state *state, int cmd, struct file_lock
 		goto out;
 	lsp = request->fl_u.nfs4_fl.owner;
 	arg.lock_owner.id = lsp->ls_id.id;
-	status = rpc_call_sync(server->client, &msg, 0);
+	status = nfs4_call_sync(server, &msg, &arg, &res, 1);
 	switch (status) {
 		case 0:
 			request->fl_type = F_UNLCK;
@@ -3187,13 +3670,14 @@ static struct nfs4_unlockdata *nfs4_alloc_unlockdata(struct file_lock *fl,
 	struct nfs4_unlockdata *p;
 	struct inode *inode = lsp->ls_state->inode;
 
-	p = kmalloc(sizeof(*p), GFP_KERNEL);
+	p = kzalloc(sizeof(*p), GFP_KERNEL);
 	if (p == NULL)
 		return NULL;
 	p->arg.fh = NFS_FH(inode);
 	p->arg.fl = &p->fl;
 	p->arg.seqid = seqid;
 	p->res.seqid = seqid;
+	p->res.seq_res.sr_slotid = NFS4_MAX_SLOT_TABLE;
 	p->arg.stateid = &lsp->ls_stateid;
 	p->lsp = lsp;
 	atomic_inc(&lsp->ls_count);
@@ -3217,6 +3701,8 @@ static void nfs4_locku_done(struct rpc_task *task, void *data)
 {
 	struct nfs4_unlockdata *calldata = data;
 
+	nfs4_sequence_done(calldata->server, &calldata->res.seq_res,
+			   task->tk_status);
 	if (RPC_ASSASSINATED(task))
 		return;
 	switch (task->tk_status) {
@@ -3233,8 +3719,11 @@ static void nfs4_locku_done(struct rpc_task *task, void *data)
 			break;
 		default:
 			if (nfs4_async_handle_error(task, calldata->server, NULL) == -EAGAIN)
-				rpc_restart_call(task);
+				nfs4_restart_rpc(task,
+						calldata->server->nfs_client);
 	}
+	nfs4_sequence_free_slot(calldata->server->nfs_client,
+				&calldata->res.seq_res);
 }
 
 static void nfs4_locku_prepare(struct rpc_task *task, void *data)
@@ -3249,6 +3738,10 @@ static void nfs4_locku_prepare(struct rpc_task *task, void *data)
 		return;
 	}
 	calldata->timestamp = jiffies;
+	if (nfs4_setup_sequence(calldata->server->nfs_client,
+				&calldata->arg.seq_args,
+				&calldata->res.seq_res, 1, task))
+		return;
 	rpc_call_start(task);
 }
 
@@ -3341,6 +3834,7 @@ struct nfs4_lockdata {
 	unsigned long timestamp;
 	int rpc_status;
 	int cancelled;
+	struct nfs_server *server;
 };
 
 static struct nfs4_lockdata *nfs4_alloc_lockdata(struct file_lock *fl,
@@ -3366,7 +3860,9 @@ static struct nfs4_lockdata *nfs4_alloc_lockdata(struct file_lock *fl,
 	p->arg.lock_owner.clientid = server->nfs_client->cl_clientid;
 	p->arg.lock_owner.id = lsp->ls_id.id;
 	p->res.lock_seqid = p->arg.lock_seqid;
+	p->res.seq_res.sr_slotid = NFS4_MAX_SLOT_TABLE;
 	p->lsp = lsp;
+	p->server = server;
 	atomic_inc(&lsp->ls_count);
 	p->ctx = get_nfs_open_context(ctx);
 	memcpy(&p->fl, fl, sizeof(p->fl));
@@ -3396,6 +3892,9 @@ static void nfs4_lock_prepare(struct rpc_task *task, void *calldata)
 	} else
 		data->arg.new_lock_owner = 0;
 	data->timestamp = jiffies;
+	if (nfs4_setup_sequence(data->server->nfs_client, &data->arg.seq_args,
+				&data->res.seq_res, 1, task))
+		return;
 	rpc_call_start(task);
 	dprintk("%s: done!, ret = %d\n", __func__, data->rpc_status);
 }
@@ -3406,6 +3905,9 @@ static void nfs4_lock_done(struct rpc_task *task, void *calldata)
 
 	dprintk("%s: begin!\n", __func__);
 
+	nfs4_sequence_done_free_slot(data->server, &data->res.seq_res,
+				     task->tk_status);
+
 	data->rpc_status = task->tk_status;
 	if (RPC_ASSASSINATED(task))
 		goto out;
@@ -3487,8 +3989,6 @@ static int _nfs4_do_setlk(struct nfs4_state *state, int cmd, struct file_lock *f
 	ret = nfs4_wait_for_completion_rpc_task(task);
 	if (ret == 0) {
 		ret = data->rpc_status;
-		if (ret == -NFS4ERR_DENIED)
-			ret = -EAGAIN;
 	} else
 		data->cancelled = 1;
 	rpc_put_task(task);
@@ -3576,9 +4076,11 @@ static int nfs4_proc_setlk(struct nfs4_state *state, int cmd, struct file_lock *
 	int err;
 
 	do {
+		err = _nfs4_proc_setlk(state, cmd, request);
+		if (err == -NFS4ERR_DENIED)
+			err = -EAGAIN;
 		err = nfs4_handle_exception(NFS_SERVER(state->inode),
-				_nfs4_proc_setlk(state, cmd, request),
-				&exception);
+				err, &exception);
 	} while (exception.retry);
 	return err;
 }
@@ -3630,8 +4132,37 @@ int nfs4_lock_delegation_recall(struct nfs4_state *state, struct file_lock *fl)
 		goto out;
 	do {
 		err = _nfs4_do_setlk(state, F_SETLK, fl, 0);
-		if (err != -NFS4ERR_DELAY)
-			break;
+		switch (err) {
+			default:
+				printk(KERN_ERR "%s: unhandled error %d.\n",
+						__func__, err);
+			case 0:
+			case -ESTALE:
+				goto out;
+			case -NFS4ERR_EXPIRED:
+			case -NFS4ERR_STALE_CLIENTID:
+			case -NFS4ERR_STALE_STATEID:
+				nfs4_schedule_state_recovery(server->nfs_client);
+				goto out;
+			case -ERESTARTSYS:
+				/*
+				 * The show must go on: exit, but mark the
+				 * stateid as needing recovery.
+				 */
+			case -NFS4ERR_ADMIN_REVOKED:
+			case -NFS4ERR_BAD_STATEID:
+			case -NFS4ERR_OPENMODE:
+				nfs4_state_mark_reclaim_nograce(server->nfs_client, state);
+				err = 0;
+				goto out;
+			case -ENOMEM:
+			case -NFS4ERR_DENIED:
+				/* kill_proc(fl->fl_pid, SIGLOST, 1); */
+				err = 0;
+				goto out;
+			case -NFS4ERR_DELAY:
+				break;
+		}
 		err = nfs4_handle_exception(server, err, &exception);
 	} while (exception.retry);
 out:
@@ -3706,10 +4237,13 @@ int nfs4_proc_fs_locations(struct inode *dir, const struct qstr *name,
 		.page = page,
 		.bitmask = bitmask,
 	};
+	struct nfs4_fs_locations_res res = {
+		.fs_locations = fs_locations,
+	};
 	struct rpc_message msg = {
 		.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_FS_LOCATIONS],
 		.rpc_argp = &args,
-		.rpc_resp = fs_locations,
+		.rpc_resp = &res,
 	};
 	int status;
 
@@ -3717,24 +4251,720 @@ int nfs4_proc_fs_locations(struct inode *dir, const struct qstr *name,
 	nfs_fattr_init(&fs_locations->fattr);
 	fs_locations->server = server;
 	fs_locations->nlocations = 0;
-	status = rpc_call_sync(server->client, &msg, 0);
+	status = nfs4_call_sync(server, &msg, &args, &res, 0);
 	nfs_fixup_referral_attributes(&fs_locations->fattr);
 	dprintk("%s: returned status = %d\n", __func__, status);
 	return status;
 }
 
-struct nfs4_state_recovery_ops nfs4_reboot_recovery_ops = {
+#ifdef CONFIG_NFS_V4_1
+/*
+ * nfs4_proc_exchange_id()
+ *
+ * Since the clientid has expired, all compounds using sessions
+ * associated with the stale clientid will be returning
+ * NFS4ERR_BADSESSION in the sequence operation, and will therefore
+ * be in some phase of session reset.
+ */
+static int nfs4_proc_exchange_id(struct nfs_client *clp, struct rpc_cred *cred)
+{
+	nfs4_verifier verifier;
+	struct nfs41_exchange_id_args args = {
+		.client = clp,
+		.flags = clp->cl_exchange_flags,
+	};
+	struct nfs41_exchange_id_res res = {
+		.client = clp,
+	};
+	int status;
+	struct rpc_message msg = {
+		.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_EXCHANGE_ID],
+		.rpc_argp = &args,
+		.rpc_resp = &res,
+		.rpc_cred = cred,
+	};
+	__be32 *p;
+
+	dprintk("--> %s\n", __func__);
+	BUG_ON(clp == NULL);
+
+	p = (u32 *)verifier.data;
+	*p++ = htonl((u32)clp->cl_boot_time.tv_sec);
+	*p = htonl((u32)clp->cl_boot_time.tv_nsec);
+	args.verifier = &verifier;
+
+	while (1) {
+		args.id_len = scnprintf(args.id, sizeof(args.id),
+					"%s/%s %u",
+					clp->cl_ipaddr,
+					rpc_peeraddr2str(clp->cl_rpcclient,
+							 RPC_DISPLAY_ADDR),
+					clp->cl_id_uniquifier);
+
+		status = rpc_call_sync(clp->cl_rpcclient, &msg, 0);
+
+		if (status != NFS4ERR_CLID_INUSE)
+			break;
+
+		if (signalled())
+			break;
+
+		if (++clp->cl_id_uniquifier == 0)
+			break;
+	}
+
+	dprintk("<-- %s status= %d\n", __func__, status);
+	return status;
+}
+
+struct nfs4_get_lease_time_data {
+	struct nfs4_get_lease_time_args *args;
+	struct nfs4_get_lease_time_res *res;
+	struct nfs_client *clp;
+};
+
+static void nfs4_get_lease_time_prepare(struct rpc_task *task,
+					void *calldata)
+{
+	int ret;
+	struct nfs4_get_lease_time_data *data =
+			(struct nfs4_get_lease_time_data *)calldata;
+
+	dprintk("--> %s\n", __func__);
+	/* just setup sequence, do not trigger session recovery
+	   since we're invoked within one */
+	ret = nfs41_setup_sequence(data->clp->cl_session,
+					&data->args->la_seq_args,
+					&data->res->lr_seq_res, 0, task);
+
+	BUG_ON(ret == -EAGAIN);
+	rpc_call_start(task);
+	dprintk("<-- %s\n", __func__);
+}
+
+/*
+ * Called from nfs4_state_manager thread for session setup, so don't recover
+ * from sequence operation or clientid errors.
+ */
+static void nfs4_get_lease_time_done(struct rpc_task *task, void *calldata)
+{
+	struct nfs4_get_lease_time_data *data =
+			(struct nfs4_get_lease_time_data *)calldata;
+
+	dprintk("--> %s\n", __func__);
+	nfs41_sequence_done(data->clp, &data->res->lr_seq_res, task->tk_status);
+	switch (task->tk_status) {
+	case -NFS4ERR_DELAY:
+	case -NFS4ERR_GRACE:
+		dprintk("%s Retry: tk_status %d\n", __func__, task->tk_status);
+		rpc_delay(task, NFS4_POLL_RETRY_MIN);
+		task->tk_status = 0;
+		nfs4_restart_rpc(task, data->clp);
+		return;
+	}
+	nfs41_sequence_free_slot(data->clp, &data->res->lr_seq_res);
+	dprintk("<-- %s\n", __func__);
+}
+
+struct rpc_call_ops nfs4_get_lease_time_ops = {
+	.rpc_call_prepare = nfs4_get_lease_time_prepare,
+	.rpc_call_done = nfs4_get_lease_time_done,
+};
+
+int nfs4_proc_get_lease_time(struct nfs_client *clp, struct nfs_fsinfo *fsinfo)
+{
+	struct rpc_task *task;
+	struct nfs4_get_lease_time_args args;
+	struct nfs4_get_lease_time_res res = {
+		.lr_fsinfo = fsinfo,
+	};
+	struct nfs4_get_lease_time_data data = {
+		.args = &args,
+		.res = &res,
+		.clp = clp,
+	};
+	struct rpc_message msg = {
+		.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_GET_LEASE_TIME],
+		.rpc_argp = &args,
+		.rpc_resp = &res,
+	};
+	struct rpc_task_setup task_setup = {
+		.rpc_client = clp->cl_rpcclient,
+		.rpc_message = &msg,
+		.callback_ops = &nfs4_get_lease_time_ops,
+		.callback_data = &data
+	};
+	int status;
+
+	res.lr_seq_res.sr_slotid = NFS4_MAX_SLOT_TABLE;
+	dprintk("--> %s\n", __func__);
+	task = rpc_run_task(&task_setup);
+
+	if (IS_ERR(task))
+		status = PTR_ERR(task);
+	else {
+		status = task->tk_status;
+		rpc_put_task(task);
+	}
+	dprintk("<-- %s return %d\n", __func__, status);
+
+	return status;
+}
+
+/*
+ * Reset a slot table
+ */
+static int nfs4_reset_slot_table(struct nfs4_slot_table *tbl, int max_slots,
+		int old_max_slots, int ivalue)
+{
+	int i;
+	int ret = 0;
+
+	dprintk("--> %s: max_reqs=%u, tbl %p\n", __func__, max_slots, tbl);
+
+	/*
+	 * Until we have dynamic slot table adjustment, insist
+	 * upon the same slot table size
+	 */
+	if (max_slots != old_max_slots) {
+		dprintk("%s reset slot table does't match old\n",
+			__func__);
+		ret = -EINVAL; /*XXX NFS4ERR_REQ_TOO_BIG ? */
+		goto out;
+	}
+	spin_lock(&tbl->slot_tbl_lock);
+	for (i = 0; i < max_slots; ++i)
+		tbl->slots[i].seq_nr = ivalue;
+	tbl->highest_used_slotid = -1;
+	spin_unlock(&tbl->slot_tbl_lock);
+	dprintk("%s: tbl=%p slots=%p max_slots=%d\n", __func__,
+		tbl, tbl->slots, tbl->max_slots);
+out:
+	dprintk("<-- %s: return %d\n", __func__, ret);
+	return ret;
+}
+
+/*
+ * Reset the forechannel and backchannel slot tables
+ */
+static int nfs4_reset_slot_tables(struct nfs4_session *session)
+{
+	int status;
+
+	status = nfs4_reset_slot_table(&session->fc_slot_table,
+			session->fc_attrs.max_reqs,
+			session->fc_slot_table.max_slots,
+			1);
+	if (status)
+		return status;
+
+	status = nfs4_reset_slot_table(&session->bc_slot_table,
+			session->bc_attrs.max_reqs,
+			session->bc_slot_table.max_slots,
+			0);
+	return status;
+}
+
+/* Destroy the slot table */
+static void nfs4_destroy_slot_tables(struct nfs4_session *session)
+{
+	if (session->fc_slot_table.slots != NULL) {
+		kfree(session->fc_slot_table.slots);
+		session->fc_slot_table.slots = NULL;
+	}
+	if (session->bc_slot_table.slots != NULL) {
+		kfree(session->bc_slot_table.slots);
+		session->bc_slot_table.slots = NULL;
+	}
+	return;
+}
+
+/*
+ * Initialize slot table
+ */
+static int nfs4_init_slot_table(struct nfs4_slot_table *tbl,
+		int max_slots, int ivalue)
+{
+	int i;
+	struct nfs4_slot *slot;
+	int ret = -ENOMEM;
+
+	BUG_ON(max_slots > NFS4_MAX_SLOT_TABLE);
+
+	dprintk("--> %s: max_reqs=%u\n", __func__, max_slots);
+
+	slot = kcalloc(max_slots, sizeof(struct nfs4_slot), GFP_KERNEL);
+	if (!slot)
+		goto out;
+	for (i = 0; i < max_slots; ++i)
+		slot[i].seq_nr = ivalue;
+	ret = 0;
+
+	spin_lock(&tbl->slot_tbl_lock);
+	if (tbl->slots != NULL) {
+		spin_unlock(&tbl->slot_tbl_lock);
+		dprintk("%s: slot table already initialized. tbl=%p slots=%p\n",
+			__func__, tbl, tbl->slots);
+		WARN_ON(1);
+		goto out_free;
+	}
+	tbl->max_slots = max_slots;
+	tbl->slots = slot;
+	tbl->highest_used_slotid = -1;  /* no slot is currently used */
+	spin_unlock(&tbl->slot_tbl_lock);
+	dprintk("%s: tbl=%p slots=%p max_slots=%d\n", __func__,
+		tbl, tbl->slots, tbl->max_slots);
+out:
+	dprintk("<-- %s: return %d\n", __func__, ret);
+	return ret;
+
+out_free:
+	kfree(slot);
+	goto out;
+}
+
+/*
+ * Initialize the forechannel and backchannel tables
+ */
+static int nfs4_init_slot_tables(struct nfs4_session *session)
+{
+	int status;
+
+	status = nfs4_init_slot_table(&session->fc_slot_table,
+			session->fc_attrs.max_reqs, 1);
+	if (status)
+		return status;
+
+	status = nfs4_init_slot_table(&session->bc_slot_table,
+			session->bc_attrs.max_reqs, 0);
+	if (status)
+		nfs4_destroy_slot_tables(session);
+
+	return status;
+}
+
+struct nfs4_session *nfs4_alloc_session(struct nfs_client *clp)
+{
+	struct nfs4_session *session;
+	struct nfs4_slot_table *tbl;
+
+	session = kzalloc(sizeof(struct nfs4_session), GFP_KERNEL);
+	if (!session)
+		return NULL;
+
+	set_bit(NFS4CLNT_SESSION_SETUP, &clp->cl_state);
+	/*
+	 * The create session reply races with the server back
+	 * channel probe. Mark the client NFS_CS_SESSION_INITING
+	 * so that the client back channel can find the
+	 * nfs_client struct
+	 */
+	clp->cl_cons_state = NFS_CS_SESSION_INITING;
+
+	tbl = &session->fc_slot_table;
+	spin_lock_init(&tbl->slot_tbl_lock);
+	rpc_init_wait_queue(&tbl->slot_tbl_waitq, "ForeChannel Slot table");
+
+	tbl = &session->bc_slot_table;
+	spin_lock_init(&tbl->slot_tbl_lock);
+	rpc_init_wait_queue(&tbl->slot_tbl_waitq, "BackChannel Slot table");
+
+	session->clp = clp;
+	return session;
+}
+
+void nfs4_destroy_session(struct nfs4_session *session)
+{
+	nfs4_proc_destroy_session(session);
+	dprintk("%s Destroy backchannel for xprt %p\n",
+		__func__, session->clp->cl_rpcclient->cl_xprt);
+	xprt_destroy_backchannel(session->clp->cl_rpcclient->cl_xprt,
+				NFS41_BC_MIN_CALLBACKS);
+	nfs4_destroy_slot_tables(session);
+	kfree(session);
+}
+
+/*
+ * Initialize the values to be used by the client in CREATE_SESSION
+ * If nfs4_init_session set the fore channel request and response sizes,
+ * use them.
+ *
+ * Set the back channel max_resp_sz_cached to zero to force the client to
+ * always set csa_cachethis to FALSE because the current implementation
+ * of the back channel DRC only supports caching the CB_SEQUENCE operation.
+ */
+static void nfs4_init_channel_attrs(struct nfs41_create_session_args *args)
+{
+	struct nfs4_session *session = args->client->cl_session;
+	unsigned int mxrqst_sz = session->fc_attrs.max_rqst_sz,
+		     mxresp_sz = session->fc_attrs.max_resp_sz;
+
+	if (mxrqst_sz == 0)
+		mxrqst_sz = NFS_MAX_FILE_IO_SIZE;
+	if (mxresp_sz == 0)
+		mxresp_sz = NFS_MAX_FILE_IO_SIZE;
+	/* Fore channel attributes */
+	args->fc_attrs.headerpadsz = 0;
+	args->fc_attrs.max_rqst_sz = mxrqst_sz;
+	args->fc_attrs.max_resp_sz = mxresp_sz;
+	args->fc_attrs.max_resp_sz_cached = mxresp_sz;
+	args->fc_attrs.max_ops = NFS4_MAX_OPS;
+	args->fc_attrs.max_reqs = session->clp->cl_rpcclient->cl_xprt->max_reqs;
+
+	dprintk("%s: Fore Channel : max_rqst_sz=%u max_resp_sz=%u "
+		"max_resp_sz_cached=%u max_ops=%u max_reqs=%u\n",
+		__func__,
+		args->fc_attrs.max_rqst_sz, args->fc_attrs.max_resp_sz,
+		args->fc_attrs.max_resp_sz_cached, args->fc_attrs.max_ops,
+		args->fc_attrs.max_reqs);
+
+	/* Back channel attributes */
+	args->bc_attrs.headerpadsz = 0;
+	args->bc_attrs.max_rqst_sz = PAGE_SIZE;
+	args->bc_attrs.max_resp_sz = PAGE_SIZE;
+	args->bc_attrs.max_resp_sz_cached = 0;
+	args->bc_attrs.max_ops = NFS4_MAX_BACK_CHANNEL_OPS;
+	args->bc_attrs.max_reqs = 1;
+
+	dprintk("%s: Back Channel : max_rqst_sz=%u max_resp_sz=%u "
+		"max_resp_sz_cached=%u max_ops=%u max_reqs=%u\n",
+		__func__,
+		args->bc_attrs.max_rqst_sz, args->bc_attrs.max_resp_sz,
+		args->bc_attrs.max_resp_sz_cached, args->bc_attrs.max_ops,
+		args->bc_attrs.max_reqs);
+}
+
+static int _verify_channel_attr(char *chan, char *attr_name, u32 sent, u32 rcvd)
+{
+	if (rcvd <= sent)
+		return 0;
+	printk(KERN_WARNING "%s: Session INVALID: %s channel %s increased. "
+		"sent=%u rcvd=%u\n", __func__, chan, attr_name, sent, rcvd);
+	return -EINVAL;
+}
+
+#define _verify_fore_channel_attr(_name_) \
+	_verify_channel_attr("fore", #_name_, \
+			     args->fc_attrs._name_, \
+			     session->fc_attrs._name_)
+
+#define _verify_back_channel_attr(_name_) \
+	_verify_channel_attr("back", #_name_, \
+			     args->bc_attrs._name_, \
+			     session->bc_attrs._name_)
+
+/*
+ * The server is not allowed to increase the fore channel header pad size,
+ * maximum response size, or maximum number of operations.
+ *
+ * The back channel attributes are only negotiatied down: We send what the
+ * (back channel) server insists upon.
+ */
+static int nfs4_verify_channel_attrs(struct nfs41_create_session_args *args,
+				     struct nfs4_session *session)
+{
+	int ret = 0;
+
+	ret |= _verify_fore_channel_attr(headerpadsz);
+	ret |= _verify_fore_channel_attr(max_resp_sz);
+	ret |= _verify_fore_channel_attr(max_ops);
+
+	ret |= _verify_back_channel_attr(headerpadsz);
+	ret |= _verify_back_channel_attr(max_rqst_sz);
+	ret |= _verify_back_channel_attr(max_resp_sz);
+	ret |= _verify_back_channel_attr(max_resp_sz_cached);
+	ret |= _verify_back_channel_attr(max_ops);
+	ret |= _verify_back_channel_attr(max_reqs);
+
+	return ret;
+}
+
+static int _nfs4_proc_create_session(struct nfs_client *clp)
+{
+	struct nfs4_session *session = clp->cl_session;
+	struct nfs41_create_session_args args = {
+		.client = clp,
+		.cb_program = NFS4_CALLBACK,
+	};
+	struct nfs41_create_session_res res = {
+		.client = clp,
+	};
+	struct rpc_message msg = {
+		.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_CREATE_SESSION],
+		.rpc_argp = &args,
+		.rpc_resp = &res,
+	};
+	int status;
+
+	nfs4_init_channel_attrs(&args);
+	args.flags = (SESSION4_PERSIST | SESSION4_BACK_CHAN);
+
+	status = rpc_call_sync(session->clp->cl_rpcclient, &msg, 0);
+
+	if (!status)
+		/* Verify the session's negotiated channel_attrs values */
+		status = nfs4_verify_channel_attrs(&args, session);
+	if (!status) {
+		/* Increment the clientid slot sequence id */
+		clp->cl_seqid++;
+	}
+
+	return status;
+}
+
+/*
+ * Issues a CREATE_SESSION operation to the server.
+ * It is the responsibility of the caller to verify the session is
+ * expired before calling this routine.
+ */
+int nfs4_proc_create_session(struct nfs_client *clp, int reset)
+{
+	int status;
+	unsigned *ptr;
+	struct nfs_fsinfo fsinfo;
+	struct nfs4_session *session = clp->cl_session;
+
+	dprintk("--> %s clp=%p session=%p\n", __func__, clp, session);
+
+	status = _nfs4_proc_create_session(clp);
+	if (status)
+		goto out;
+
+	/* Init or reset the fore channel */
+	if (reset)
+		status = nfs4_reset_slot_tables(session);
+	else
+		status = nfs4_init_slot_tables(session);
+	dprintk("fore channel slot table initialization returned %d\n", status);
+	if (status)
+		goto out;
+
+	ptr = (unsigned *)&session->sess_id.data[0];
+	dprintk("%s client>seqid %d sessionid %u:%u:%u:%u\n", __func__,
+		clp->cl_seqid, ptr[0], ptr[1], ptr[2], ptr[3]);
+
+	if (reset)
+		/* Lease time is aleady set */
+		goto out;
+
+	/* Get the lease time */
+	status = nfs4_proc_get_lease_time(clp, &fsinfo);
+	if (status == 0) {
+		/* Update lease time and schedule renewal */
+		spin_lock(&clp->cl_lock);
+		clp->cl_lease_time = fsinfo.lease_time * HZ;
+		clp->cl_last_renewal = jiffies;
+		clear_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state);
+		spin_unlock(&clp->cl_lock);
+
+		nfs4_schedule_state_renewal(clp);
+	}
+out:
+	dprintk("<-- %s\n", __func__);
+	return status;
+}
+
+/*
+ * Issue the over-the-wire RPC DESTROY_SESSION.
+ * The caller must serialize access to this routine.
+ */
+int nfs4_proc_destroy_session(struct nfs4_session *session)
+{
+	int status = 0;
+	struct rpc_message msg;
+
+	dprintk("--> nfs4_proc_destroy_session\n");
+
+	/* session is still being setup */
+	if (session->clp->cl_cons_state != NFS_CS_READY)
+		return status;
+
+	msg.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_DESTROY_SESSION];
+	msg.rpc_argp = session;
+	msg.rpc_resp = NULL;
+	msg.rpc_cred = NULL;
+	status = rpc_call_sync(session->clp->cl_rpcclient, &msg, 0);
+
+	if (status)
+		printk(KERN_WARNING
+			"Got error %d from the server on DESTROY_SESSION. "
+			"Session has been destroyed regardless...\n", status);
+
+	dprintk("<-- nfs4_proc_destroy_session\n");
+	return status;
+}
+
+/*
+ * Renew the cl_session lease.
+ */
+static int nfs4_proc_sequence(struct nfs_client *clp, struct rpc_cred *cred)
+{
+	struct nfs4_sequence_args args;
+	struct nfs4_sequence_res res;
+
+	struct rpc_message msg = {
+		.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_SEQUENCE],
+		.rpc_argp = &args,
+		.rpc_resp = &res,
+		.rpc_cred = cred,
+	};
+
+	args.sa_cache_this = 0;
+
+	return nfs4_call_sync_sequence(clp, clp->cl_rpcclient, &msg, &args,
+				       &res, 0);
+}
+
+void nfs41_sequence_call_done(struct rpc_task *task, void *data)
+{
+	struct nfs_client *clp = (struct nfs_client *)data;
+
+	nfs41_sequence_done(clp, task->tk_msg.rpc_resp, task->tk_status);
+
+	if (task->tk_status < 0) {
+		dprintk("%s ERROR %d\n", __func__, task->tk_status);
+
+		if (_nfs4_async_handle_error(task, NULL, clp, NULL)
+								== -EAGAIN) {
+			nfs4_restart_rpc(task, clp);
+			return;
+		}
+	}
+	nfs41_sequence_free_slot(clp, task->tk_msg.rpc_resp);
+	dprintk("%s rpc_cred %p\n", __func__, task->tk_msg.rpc_cred);
+
+	put_rpccred(task->tk_msg.rpc_cred);
+	kfree(task->tk_msg.rpc_argp);
+	kfree(task->tk_msg.rpc_resp);
+
+	dprintk("<-- %s\n", __func__);
+}
+
+static void nfs41_sequence_prepare(struct rpc_task *task, void *data)
+{
+	struct nfs_client *clp;
+	struct nfs4_sequence_args *args;
+	struct nfs4_sequence_res *res;
+
+	clp = (struct nfs_client *)data;
+	args = task->tk_msg.rpc_argp;
+	res = task->tk_msg.rpc_resp;
+
+	if (nfs4_setup_sequence(clp, args, res, 0, task))
+		return;
+	rpc_call_start(task);
+}
+
+static const struct rpc_call_ops nfs41_sequence_ops = {
+	.rpc_call_done = nfs41_sequence_call_done,
+	.rpc_call_prepare = nfs41_sequence_prepare,
+};
+
+static int nfs41_proc_async_sequence(struct nfs_client *clp,
+				     struct rpc_cred *cred)
+{
+	struct nfs4_sequence_args *args;
+	struct nfs4_sequence_res *res;
+	struct rpc_message msg = {
+		.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_SEQUENCE],
+		.rpc_cred = cred,
+	};
+
+	args = kzalloc(sizeof(*args), GFP_KERNEL);
+	if (!args)
+		return -ENOMEM;
+	res = kzalloc(sizeof(*res), GFP_KERNEL);
+	if (!res) {
+		kfree(args);
+		return -ENOMEM;
+	}
+	res->sr_slotid = NFS4_MAX_SLOT_TABLE;
+	msg.rpc_argp = args;
+	msg.rpc_resp = res;
+
+	return rpc_call_async(clp->cl_rpcclient, &msg, RPC_TASK_SOFT,
+			      &nfs41_sequence_ops, (void *)clp);
+}
+
+#endif /* CONFIG_NFS_V4_1 */
+
+struct nfs4_state_recovery_ops nfs40_reboot_recovery_ops = {
 	.owner_flag_bit = NFS_OWNER_RECLAIM_REBOOT,
 	.state_flag_bit	= NFS_STATE_RECLAIM_REBOOT,
 	.recover_open	= nfs4_open_reclaim,
 	.recover_lock	= nfs4_lock_reclaim,
+	.establish_clid = nfs4_init_clientid,
+	.get_clid_cred	= nfs4_get_setclientid_cred,
+};
+
+#if defined(CONFIG_NFS_V4_1)
+struct nfs4_state_recovery_ops nfs41_reboot_recovery_ops = {
+	.owner_flag_bit = NFS_OWNER_RECLAIM_REBOOT,
+	.state_flag_bit	= NFS_STATE_RECLAIM_REBOOT,
+	.recover_open	= nfs4_open_reclaim,
+	.recover_lock	= nfs4_lock_reclaim,
+	.establish_clid = nfs4_proc_exchange_id,
+	.get_clid_cred	= nfs4_get_exchange_id_cred,
+};
+#endif /* CONFIG_NFS_V4_1 */
+
+struct nfs4_state_recovery_ops nfs40_nograce_recovery_ops = {
+	.owner_flag_bit = NFS_OWNER_RECLAIM_NOGRACE,
+	.state_flag_bit	= NFS_STATE_RECLAIM_NOGRACE,
+	.recover_open	= nfs4_open_expired,
+	.recover_lock	= nfs4_lock_expired,
+	.establish_clid = nfs4_init_clientid,
+	.get_clid_cred	= nfs4_get_setclientid_cred,
 };
 
-struct nfs4_state_recovery_ops nfs4_nograce_recovery_ops = {
+#if defined(CONFIG_NFS_V4_1)
+struct nfs4_state_recovery_ops nfs41_nograce_recovery_ops = {
 	.owner_flag_bit = NFS_OWNER_RECLAIM_NOGRACE,
 	.state_flag_bit	= NFS_STATE_RECLAIM_NOGRACE,
 	.recover_open	= nfs4_open_expired,
 	.recover_lock	= nfs4_lock_expired,
+	.establish_clid = nfs4_proc_exchange_id,
+	.get_clid_cred	= nfs4_get_exchange_id_cred,
+};
+#endif /* CONFIG_NFS_V4_1 */
+
+struct nfs4_state_maintenance_ops nfs40_state_renewal_ops = {
+	.sched_state_renewal = nfs4_proc_async_renew,
+	.get_state_renewal_cred_locked = nfs4_get_renew_cred_locked,
+	.renew_lease = nfs4_proc_renew,
+};
+
+#if defined(CONFIG_NFS_V4_1)
+struct nfs4_state_maintenance_ops nfs41_state_renewal_ops = {
+	.sched_state_renewal = nfs41_proc_async_sequence,
+	.get_state_renewal_cred_locked = nfs4_get_machine_cred_locked,
+	.renew_lease = nfs4_proc_sequence,
+};
+#endif
+
+/*
+ * Per minor version reboot and network partition recovery ops
+ */
+
+struct nfs4_state_recovery_ops *nfs4_reboot_recovery_ops[] = {
+	&nfs40_reboot_recovery_ops,
+#if defined(CONFIG_NFS_V4_1)
+	&nfs41_reboot_recovery_ops,
+#endif
+};
+
+struct nfs4_state_recovery_ops *nfs4_nograce_recovery_ops[] = {
+	&nfs40_nograce_recovery_ops,
+#if defined(CONFIG_NFS_V4_1)
+	&nfs41_nograce_recovery_ops,
+#endif
+};
+
+struct nfs4_state_maintenance_ops *nfs4_state_renewal_ops[] = {
+	&nfs40_state_renewal_ops,
+#if defined(CONFIG_NFS_V4_1)
+	&nfs41_state_renewal_ops,
+#endif
 };
 
 static const struct inode_operations nfs4_file_inode_operations = {
diff --git a/fs/nfs/nfs4renewd.c b/fs/nfs/nfs4renewd.c
index f524e932ff7..e27c6cef18f 100644
--- a/fs/nfs/nfs4renewd.c
+++ b/fs/nfs/nfs4renewd.c
@@ -59,12 +59,14 @@
 void
 nfs4_renew_state(struct work_struct *work)
 {
+	struct nfs4_state_maintenance_ops *ops;
 	struct nfs_client *clp =
 		container_of(work, struct nfs_client, cl_renewd.work);
 	struct rpc_cred *cred;
 	long lease, timeout;
 	unsigned long last, now;
 
+	ops = nfs4_state_renewal_ops[clp->cl_minorversion];
 	dprintk("%s: start\n", __func__);
 	/* Are there any active superblocks? */
 	if (list_empty(&clp->cl_superblocks))
@@ -76,7 +78,7 @@ nfs4_renew_state(struct work_struct *work)
 	timeout = (2 * lease) / 3 + (long)last - (long)now;
 	/* Are we close to a lease timeout? */
 	if (time_after(now, last + lease/3)) {
-		cred = nfs4_get_renew_cred_locked(clp);
+		cred = ops->get_state_renewal_cred_locked(clp);
 		spin_unlock(&clp->cl_lock);
 		if (cred == NULL) {
 			if (list_empty(&clp->cl_delegations)) {
@@ -86,7 +88,7 @@ nfs4_renew_state(struct work_struct *work)
 			nfs_expire_all_delegations(clp);
 		} else {
 			/* Queue an asynchronous RENEW. */
-			nfs4_proc_async_renew(clp, cred);
+			ops->sched_state_renewal(clp, cred);
 			put_rpccred(cred);
 		}
 		timeout = (2 * lease) / 3;
diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index 0298e909559..b73c5a72865 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -60,7 +60,7 @@ const nfs4_stateid zero_stateid;
 
 static LIST_HEAD(nfs4_clientid_list);
 
-static int nfs4_init_client(struct nfs_client *clp, struct rpc_cred *cred)
+int nfs4_init_clientid(struct nfs_client *clp, struct rpc_cred *cred)
 {
 	unsigned short port;
 	int status;
@@ -77,7 +77,7 @@ static int nfs4_init_client(struct nfs_client *clp, struct rpc_cred *cred)
 	return status;
 }
 
-static struct rpc_cred *nfs4_get_machine_cred_locked(struct nfs_client *clp)
+struct rpc_cred *nfs4_get_machine_cred_locked(struct nfs_client *clp)
 {
 	struct rpc_cred *cred = NULL;
 
@@ -114,17 +114,21 @@ struct rpc_cred *nfs4_get_renew_cred_locked(struct nfs_client *clp)
 	return cred;
 }
 
-static struct rpc_cred *nfs4_get_renew_cred(struct nfs_client *clp)
+#if defined(CONFIG_NFS_V4_1)
+
+struct rpc_cred *nfs4_get_exchange_id_cred(struct nfs_client *clp)
 {
 	struct rpc_cred *cred;
 
 	spin_lock(&clp->cl_lock);
-	cred = nfs4_get_renew_cred_locked(clp);
+	cred = nfs4_get_machine_cred_locked(clp);
 	spin_unlock(&clp->cl_lock);
 	return cred;
 }
 
-static struct rpc_cred *nfs4_get_setclientid_cred(struct nfs_client *clp)
+#endif /* CONFIG_NFS_V4_1 */
+
+struct rpc_cred *nfs4_get_setclientid_cred(struct nfs_client *clp)
 {
 	struct nfs4_state_owner *sp;
 	struct rb_node *pos;
@@ -738,12 +742,14 @@ static void nfs_increment_seqid(int status, struct nfs_seqid *seqid)
 
 void nfs_increment_open_seqid(int status, struct nfs_seqid *seqid)
 {
-	if (status == -NFS4ERR_BAD_SEQID) {
-		struct nfs4_state_owner *sp = container_of(seqid->sequence,
-				struct nfs4_state_owner, so_seqid);
+	struct nfs4_state_owner *sp = container_of(seqid->sequence,
+					struct nfs4_state_owner, so_seqid);
+	struct nfs_server *server = sp->so_server;
+
+	if (status == -NFS4ERR_BAD_SEQID)
 		nfs4_drop_state_owner(sp);
-	}
-	nfs_increment_seqid(status, seqid);
+	if (!nfs4_has_session(server->nfs_client))
+		nfs_increment_seqid(status, seqid);
 }
 
 /*
@@ -847,32 +853,45 @@ static int nfs4_reclaim_locks(struct nfs4_state *state, const struct nfs4_state_
 	struct file_lock *fl;
 	int status = 0;
 
+	if (inode->i_flock == NULL)
+		return 0;
+
+	/* Guard against delegation returns and new lock/unlock calls */
 	down_write(&nfsi->rwsem);
+	/* Protect inode->i_flock using the BKL */
+	lock_kernel();
 	for (fl = inode->i_flock; fl != NULL; fl = fl->fl_next) {
 		if (!(fl->fl_flags & (FL_POSIX|FL_FLOCK)))
 			continue;
 		if (nfs_file_open_context(fl->fl_file)->state != state)
 			continue;
+		unlock_kernel();
 		status = ops->recover_lock(state, fl);
-		if (status >= 0)
-			continue;
 		switch (status) {
+			case 0:
+				break;
+			case -ESTALE:
+			case -NFS4ERR_ADMIN_REVOKED:
+			case -NFS4ERR_STALE_STATEID:
+			case -NFS4ERR_BAD_STATEID:
+			case -NFS4ERR_EXPIRED:
+			case -NFS4ERR_NO_GRACE:
+			case -NFS4ERR_STALE_CLIENTID:
+				goto out;
 			default:
 				printk(KERN_ERR "%s: unhandled error %d. Zeroing state\n",
 						__func__, status);
-			case -NFS4ERR_EXPIRED:
-			case -NFS4ERR_NO_GRACE:
+			case -ENOMEM:
+			case -NFS4ERR_DENIED:
 			case -NFS4ERR_RECLAIM_BAD:
 			case -NFS4ERR_RECLAIM_CONFLICT:
 				/* kill_proc(fl->fl_pid, SIGLOST, 1); */
-				break;
-			case -NFS4ERR_STALE_CLIENTID:
-				goto out_err;
+				status = 0;
 		}
+		lock_kernel();
 	}
-	up_write(&nfsi->rwsem);
-	return 0;
-out_err:
+	unlock_kernel();
+out:
 	up_write(&nfsi->rwsem);
 	return status;
 }
@@ -918,6 +937,7 @@ restart:
 				printk(KERN_ERR "%s: unhandled error %d. Zeroing state\n",
 						__func__, status);
 			case -ENOENT:
+			case -ENOMEM:
 			case -ESTALE:
 				/*
 				 * Open state on this file cannot be recovered
@@ -928,6 +948,9 @@ restart:
 				/* Mark the file as being 'closed' */
 				state->state = 0;
 				break;
+			case -NFS4ERR_ADMIN_REVOKED:
+			case -NFS4ERR_STALE_STATEID:
+			case -NFS4ERR_BAD_STATEID:
 			case -NFS4ERR_RECLAIM_BAD:
 			case -NFS4ERR_RECLAIM_CONFLICT:
 				nfs4_state_mark_reclaim_nograce(sp->so_client, state);
@@ -1042,6 +1065,14 @@ static void nfs4_recovery_handle_error(struct nfs_client *clp, int error)
 		case -NFS4ERR_EXPIRED:
 			set_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state);
 			nfs4_state_start_reclaim_nograce(clp);
+		case -NFS4ERR_BADSESSION:
+		case -NFS4ERR_BADSLOT:
+		case -NFS4ERR_BAD_HIGH_SLOT:
+		case -NFS4ERR_DEADSESSION:
+		case -NFS4ERR_CONN_NOT_BOUND_TO_SESSION:
+		case -NFS4ERR_SEQ_FALSE_RETRY:
+		case -NFS4ERR_SEQ_MISORDERED:
+			set_bit(NFS4CLNT_SESSION_SETUP, &clp->cl_state);
 	}
 }
 
@@ -1075,18 +1106,22 @@ restart:
 static int nfs4_check_lease(struct nfs_client *clp)
 {
 	struct rpc_cred *cred;
+	struct nfs4_state_maintenance_ops *ops =
+		nfs4_state_renewal_ops[clp->cl_minorversion];
 	int status = -NFS4ERR_EXPIRED;
 
 	/* Is the client already known to have an expired lease? */
 	if (test_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state))
 		return 0;
-	cred = nfs4_get_renew_cred(clp);
+	spin_lock(&clp->cl_lock);
+	cred = ops->get_state_renewal_cred_locked(clp);
+	spin_unlock(&clp->cl_lock);
 	if (cred == NULL) {
 		cred = nfs4_get_setclientid_cred(clp);
 		if (cred == NULL)
 			goto out;
 	}
-	status = nfs4_proc_renew(clp, cred);
+	status = ops->renew_lease(clp, cred);
 	put_rpccred(cred);
 out:
 	nfs4_recovery_handle_error(clp, status);
@@ -1096,21 +1131,98 @@ out:
 static int nfs4_reclaim_lease(struct nfs_client *clp)
 {
 	struct rpc_cred *cred;
+	struct nfs4_state_recovery_ops *ops =
+		nfs4_reboot_recovery_ops[clp->cl_minorversion];
 	int status = -ENOENT;
 
-	cred = nfs4_get_setclientid_cred(clp);
+	cred = ops->get_clid_cred(clp);
 	if (cred != NULL) {
-		status = nfs4_init_client(clp, cred);
+		status = ops->establish_clid(clp, cred);
 		put_rpccred(cred);
 		/* Handle case where the user hasn't set up machine creds */
 		if (status == -EACCES && cred == clp->cl_machine_cred) {
 			nfs4_clear_machine_cred(clp);
 			status = -EAGAIN;
 		}
+		if (status == -NFS4ERR_MINOR_VERS_MISMATCH)
+			status = -EPROTONOSUPPORT;
+	}
+	return status;
+}
+
+#ifdef CONFIG_NFS_V4_1
+static void nfs4_session_recovery_handle_error(struct nfs_client *clp, int err)
+{
+	switch (err) {
+	case -NFS4ERR_STALE_CLIENTID:
+		set_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state);
+		set_bit(NFS4CLNT_SESSION_SETUP, &clp->cl_state);
+	}
+}
+
+static int nfs4_reset_session(struct nfs_client *clp)
+{
+	int status;
+
+	status = nfs4_proc_destroy_session(clp->cl_session);
+	if (status && status != -NFS4ERR_BADSESSION &&
+	    status != -NFS4ERR_DEADSESSION) {
+		nfs4_session_recovery_handle_error(clp, status);
+		goto out;
 	}
+
+	memset(clp->cl_session->sess_id.data, 0, NFS4_MAX_SESSIONID_LEN);
+	status = nfs4_proc_create_session(clp, 1);
+	if (status)
+		nfs4_session_recovery_handle_error(clp, status);
+		/* fall through*/
+out:
+	/* Wake up the next rpc task even on error */
+	rpc_wake_up_next(&clp->cl_session->fc_slot_table.slot_tbl_waitq);
 	return status;
 }
 
+static int nfs4_initialize_session(struct nfs_client *clp)
+{
+	int status;
+
+	status = nfs4_proc_create_session(clp, 0);
+	if (!status) {
+		nfs_mark_client_ready(clp, NFS_CS_READY);
+	} else if (status == -NFS4ERR_STALE_CLIENTID) {
+		set_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state);
+		set_bit(NFS4CLNT_SESSION_SETUP, &clp->cl_state);
+	} else {
+		nfs_mark_client_ready(clp, status);
+	}
+	return status;
+}
+#else /* CONFIG_NFS_V4_1 */
+static int nfs4_reset_session(struct nfs_client *clp) { return 0; }
+static int nfs4_initialize_session(struct nfs_client *clp) { return 0; }
+#endif /* CONFIG_NFS_V4_1 */
+
+/* Set NFS4CLNT_LEASE_EXPIRED for all v4.0 errors and for recoverable errors
+ * on EXCHANGE_ID for v4.1
+ */
+static void nfs4_set_lease_expired(struct nfs_client *clp, int status)
+{
+	if (nfs4_has_session(clp)) {
+		switch (status) {
+		case -NFS4ERR_DELAY:
+		case -NFS4ERR_CLID_INUSE:
+		case -EAGAIN:
+			break;
+
+		case -NFS4ERR_NOT_SAME: /* FixMe: implement recovery
+					 * in nfs4_exchange_id */
+		default:
+			return;
+		}
+	}
+	set_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state);
+}
+
 static void nfs4_state_manager(struct nfs_client *clp)
 {
 	int status = 0;
@@ -1121,9 +1233,12 @@ static void nfs4_state_manager(struct nfs_client *clp)
 			/* We're going to have to re-establish a clientid */
 			status = nfs4_reclaim_lease(clp);
 			if (status) {
-				set_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state);
+				nfs4_set_lease_expired(clp, status);
 				if (status == -EAGAIN)
 					continue;
+				if (clp->cl_cons_state ==
+							NFS_CS_SESSION_INITING)
+					nfs_mark_client_ready(clp, status);
 				goto out_error;
 			}
 			clear_bit(NFS4CLNT_CHECK_LEASE, &clp->cl_state);
@@ -1134,25 +1249,44 @@ static void nfs4_state_manager(struct nfs_client *clp)
 			if (status != 0)
 				continue;
 		}
-
+		/* Initialize or reset the session */
+		if (nfs4_has_session(clp) &&
+		   test_and_clear_bit(NFS4CLNT_SESSION_SETUP, &clp->cl_state)) {
+			if (clp->cl_cons_state == NFS_CS_SESSION_INITING)
+				status = nfs4_initialize_session(clp);
+			else
+				status = nfs4_reset_session(clp);
+			if (status) {
+				if (status == -NFS4ERR_STALE_CLIENTID)
+					continue;
+				goto out_error;
+			}
+		}
 		/* First recover reboot state... */
 		if (test_and_clear_bit(NFS4CLNT_RECLAIM_REBOOT, &clp->cl_state)) {
-			status = nfs4_do_reclaim(clp, &nfs4_reboot_recovery_ops);
+			status = nfs4_do_reclaim(clp,
+				nfs4_reboot_recovery_ops[clp->cl_minorversion]);
 			if (status == -NFS4ERR_STALE_CLIENTID)
 				continue;
+			if (test_bit(NFS4CLNT_SESSION_SETUP, &clp->cl_state))
+				continue;
 			nfs4_state_end_reclaim_reboot(clp);
 			continue;
 		}
 
 		/* Now recover expired state... */
 		if (test_and_clear_bit(NFS4CLNT_RECLAIM_NOGRACE, &clp->cl_state)) {
-			status = nfs4_do_reclaim(clp, &nfs4_nograce_recovery_ops);
+			status = nfs4_do_reclaim(clp,
+				nfs4_nograce_recovery_ops[clp->cl_minorversion]);
 			if (status < 0) {
 				set_bit(NFS4CLNT_RECLAIM_NOGRACE, &clp->cl_state);
 				if (status == -NFS4ERR_STALE_CLIENTID)
 					continue;
 				if (status == -NFS4ERR_EXPIRED)
 					continue;
+				if (test_bit(NFS4CLNT_SESSION_SETUP,
+								&clp->cl_state))
+					continue;
 				goto out_error;
 			} else
 				nfs4_state_end_reclaim_nograce(clp);
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index 1690f0e44b9..617273e7d47 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -192,12 +192,16 @@ static int nfs4_stat_to_errno(int);
 				 decode_verifier_maxsz)
 #define encode_remove_maxsz	(op_encode_hdr_maxsz + \
 				nfs4_name_maxsz)
+#define decode_remove_maxsz	(op_decode_hdr_maxsz + \
+				 decode_change_info_maxsz)
 #define encode_rename_maxsz	(op_encode_hdr_maxsz + \
 				2 * nfs4_name_maxsz)
-#define decode_rename_maxsz	(op_decode_hdr_maxsz + 5 + 5)
+#define decode_rename_maxsz	(op_decode_hdr_maxsz + \
+				 decode_change_info_maxsz + \
+				 decode_change_info_maxsz)
 #define encode_link_maxsz	(op_encode_hdr_maxsz + \
 				nfs4_name_maxsz)
-#define decode_link_maxsz	(op_decode_hdr_maxsz + 5)
+#define decode_link_maxsz	(op_decode_hdr_maxsz + decode_change_info_maxsz)
 #define encode_lock_maxsz	(op_encode_hdr_maxsz + \
 				 7 + \
 				 1 + encode_stateid_maxsz + 8)
@@ -240,43 +244,115 @@ static int nfs4_stat_to_errno(int);
 				(encode_getattr_maxsz)
 #define decode_fs_locations_maxsz \
 				(0)
+
+#if defined(CONFIG_NFS_V4_1)
+#define NFS4_MAX_MACHINE_NAME_LEN (64)
+
+#define encode_exchange_id_maxsz (op_encode_hdr_maxsz + \
+				encode_verifier_maxsz + \
+				1 /* co_ownerid.len */ + \
+				XDR_QUADLEN(NFS4_EXCHANGE_ID_LEN) + \
+				1 /* flags */ + \
+				1 /* spa_how */ + \
+				0 /* SP4_NONE (for now) */ + \
+				1 /* zero implemetation id array */)
+#define decode_exchange_id_maxsz (op_decode_hdr_maxsz + \
+				2 /* eir_clientid */ + \
+				1 /* eir_sequenceid */ + \
+				1 /* eir_flags */ + \
+				1 /* spr_how */ + \
+				0 /* SP4_NONE (for now) */ + \
+				2 /* eir_server_owner.so_minor_id */ + \
+				/* eir_server_owner.so_major_id<> */ \
+				XDR_QUADLEN(NFS4_OPAQUE_LIMIT) + 1 + \
+				/* eir_server_scope<> */ \
+				XDR_QUADLEN(NFS4_OPAQUE_LIMIT) + 1 + \
+				1 /* eir_server_impl_id array length */ + \
+				0 /* ignored eir_server_impl_id contents */)
+#define encode_channel_attrs_maxsz  (6 + 1 /* ca_rdma_ird.len (0) */)
+#define decode_channel_attrs_maxsz  (6 + \
+				     1 /* ca_rdma_ird.len */ + \
+				     1 /* ca_rdma_ird */)
+#define encode_create_session_maxsz  (op_encode_hdr_maxsz + \
+				     2 /* csa_clientid */ + \
+				     1 /* csa_sequence */ + \
+				     1 /* csa_flags */ + \
+				     encode_channel_attrs_maxsz + \
+				     encode_channel_attrs_maxsz + \
+				     1 /* csa_cb_program */ + \
+				     1 /* csa_sec_parms.len (1) */ + \
+				     1 /* cb_secflavor (AUTH_SYS) */ + \
+				     1 /* stamp */ + \
+				     1 /* machinename.len */ + \
+				     XDR_QUADLEN(NFS4_MAX_MACHINE_NAME_LEN) + \
+				     1 /* uid */ + \
+				     1 /* gid */ + \
+				     1 /* gids.len (0) */)
+#define decode_create_session_maxsz  (op_decode_hdr_maxsz +	\
+				     XDR_QUADLEN(NFS4_MAX_SESSIONID_LEN) + \
+				     1 /* csr_sequence */ + \
+				     1 /* csr_flags */ + \
+				     decode_channel_attrs_maxsz + \
+				     decode_channel_attrs_maxsz)
+#define encode_destroy_session_maxsz    (op_encode_hdr_maxsz + 4)
+#define decode_destroy_session_maxsz    (op_decode_hdr_maxsz)
+#define encode_sequence_maxsz	(op_encode_hdr_maxsz + \
+				XDR_QUADLEN(NFS4_MAX_SESSIONID_LEN) + 4)
+#define decode_sequence_maxsz	(op_decode_hdr_maxsz + \
+				XDR_QUADLEN(NFS4_MAX_SESSIONID_LEN) + 5)
+#else /* CONFIG_NFS_V4_1 */
+#define encode_sequence_maxsz	0
+#define decode_sequence_maxsz	0
+#endif /* CONFIG_NFS_V4_1 */
+
 #define NFS4_enc_compound_sz	(1024)  /* XXX: large enough? */
 #define NFS4_dec_compound_sz	(1024)  /* XXX: large enough? */
 #define NFS4_enc_read_sz	(compound_encode_hdr_maxsz + \
+				encode_sequence_maxsz + \
 				encode_putfh_maxsz + \
 				encode_read_maxsz)
 #define NFS4_dec_read_sz	(compound_decode_hdr_maxsz + \
+				decode_sequence_maxsz + \
 				decode_putfh_maxsz + \
 				decode_read_maxsz)
 #define NFS4_enc_readlink_sz	(compound_encode_hdr_maxsz + \
+				encode_sequence_maxsz + \
 				encode_putfh_maxsz + \
 				encode_readlink_maxsz)
 #define NFS4_dec_readlink_sz	(compound_decode_hdr_maxsz + \
+				decode_sequence_maxsz + \
 				decode_putfh_maxsz + \
 				decode_readlink_maxsz)
 #define NFS4_enc_readdir_sz	(compound_encode_hdr_maxsz + \
+				encode_sequence_maxsz + \
 				encode_putfh_maxsz + \
 				encode_readdir_maxsz)
 #define NFS4_dec_readdir_sz	(compound_decode_hdr_maxsz + \
+				decode_sequence_maxsz + \
 				decode_putfh_maxsz + \
 				decode_readdir_maxsz)
 #define NFS4_enc_write_sz	(compound_encode_hdr_maxsz + \
+				encode_sequence_maxsz + \
 				encode_putfh_maxsz + \
 				encode_write_maxsz + \
 				encode_getattr_maxsz)
 #define NFS4_dec_write_sz	(compound_decode_hdr_maxsz + \
+				decode_sequence_maxsz + \
 				decode_putfh_maxsz + \
 				decode_write_maxsz + \
 				decode_getattr_maxsz)
 #define NFS4_enc_commit_sz	(compound_encode_hdr_maxsz + \
+				encode_sequence_maxsz + \
 				encode_putfh_maxsz + \
 				encode_commit_maxsz + \
 				encode_getattr_maxsz)
 #define NFS4_dec_commit_sz	(compound_decode_hdr_maxsz + \
+				decode_sequence_maxsz + \
 				decode_putfh_maxsz + \
 				decode_commit_maxsz + \
 				decode_getattr_maxsz)
 #define NFS4_enc_open_sz        (compound_encode_hdr_maxsz + \
+				encode_sequence_maxsz + \
 				encode_putfh_maxsz + \
 				encode_savefh_maxsz + \
 				encode_open_maxsz + \
@@ -285,6 +361,7 @@ static int nfs4_stat_to_errno(int);
 				encode_restorefh_maxsz + \
 				encode_getattr_maxsz)
 #define NFS4_dec_open_sz        (compound_decode_hdr_maxsz + \
+				decode_sequence_maxsz + \
 				decode_putfh_maxsz + \
 				decode_savefh_maxsz + \
 				decode_open_maxsz + \
@@ -301,43 +378,53 @@ static int nfs4_stat_to_errno(int);
 				 decode_putfh_maxsz + \
 				 decode_open_confirm_maxsz)
 #define NFS4_enc_open_noattr_sz	(compound_encode_hdr_maxsz + \
+					encode_sequence_maxsz + \
 					encode_putfh_maxsz + \
 					encode_open_maxsz + \
 					encode_getattr_maxsz)
 #define NFS4_dec_open_noattr_sz	(compound_decode_hdr_maxsz + \
+					decode_sequence_maxsz + \
 					decode_putfh_maxsz + \
 					decode_open_maxsz + \
 					decode_getattr_maxsz)
 #define NFS4_enc_open_downgrade_sz \
 				(compound_encode_hdr_maxsz + \
+				 encode_sequence_maxsz + \
 				 encode_putfh_maxsz + \
 				 encode_open_downgrade_maxsz + \
 				 encode_getattr_maxsz)
 #define NFS4_dec_open_downgrade_sz \
 				(compound_decode_hdr_maxsz + \
+				 decode_sequence_maxsz + \
 				 decode_putfh_maxsz + \
 				 decode_open_downgrade_maxsz + \
 				 decode_getattr_maxsz)
 #define NFS4_enc_close_sz	(compound_encode_hdr_maxsz + \
+				 encode_sequence_maxsz + \
 				 encode_putfh_maxsz + \
 				 encode_close_maxsz + \
 				 encode_getattr_maxsz)
 #define NFS4_dec_close_sz	(compound_decode_hdr_maxsz + \
+				 decode_sequence_maxsz + \
 				 decode_putfh_maxsz + \
 				 decode_close_maxsz + \
 				 decode_getattr_maxsz)
 #define NFS4_enc_setattr_sz	(compound_encode_hdr_maxsz + \
+				 encode_sequence_maxsz + \
 				 encode_putfh_maxsz + \
 				 encode_setattr_maxsz + \
 				 encode_getattr_maxsz)
 #define NFS4_dec_setattr_sz	(compound_decode_hdr_maxsz + \
+				 decode_sequence_maxsz + \
 				 decode_putfh_maxsz + \
 				 decode_setattr_maxsz + \
 				 decode_getattr_maxsz)
 #define NFS4_enc_fsinfo_sz	(compound_encode_hdr_maxsz + \
+				encode_sequence_maxsz + \
 				encode_putfh_maxsz + \
 				encode_fsinfo_maxsz)
 #define NFS4_dec_fsinfo_sz	(compound_decode_hdr_maxsz + \
+				decode_sequence_maxsz + \
 				decode_putfh_maxsz + \
 				decode_fsinfo_maxsz)
 #define NFS4_enc_renew_sz	(compound_encode_hdr_maxsz + \
@@ -359,64 +446,81 @@ static int nfs4_stat_to_errno(int);
 				decode_putrootfh_maxsz + \
 				decode_fsinfo_maxsz)
 #define NFS4_enc_lock_sz        (compound_encode_hdr_maxsz + \
+				encode_sequence_maxsz + \
 				encode_putfh_maxsz + \
 				encode_lock_maxsz)
 #define NFS4_dec_lock_sz        (compound_decode_hdr_maxsz + \
+				decode_sequence_maxsz + \
 				decode_putfh_maxsz + \
 				decode_lock_maxsz)
 #define NFS4_enc_lockt_sz       (compound_encode_hdr_maxsz + \
+				encode_sequence_maxsz + \
 				encode_putfh_maxsz + \
 				encode_lockt_maxsz)
 #define NFS4_dec_lockt_sz       (compound_decode_hdr_maxsz + \
+				 decode_sequence_maxsz + \
 				 decode_putfh_maxsz + \
 				 decode_lockt_maxsz)
 #define NFS4_enc_locku_sz       (compound_encode_hdr_maxsz + \
+				encode_sequence_maxsz + \
 				encode_putfh_maxsz + \
 				encode_locku_maxsz)
 #define NFS4_dec_locku_sz       (compound_decode_hdr_maxsz + \
+				decode_sequence_maxsz + \
 				decode_putfh_maxsz + \
 				decode_locku_maxsz)
 #define NFS4_enc_access_sz	(compound_encode_hdr_maxsz + \
+				encode_sequence_maxsz + \
 				encode_putfh_maxsz + \
 				encode_access_maxsz + \
 				encode_getattr_maxsz)
 #define NFS4_dec_access_sz	(compound_decode_hdr_maxsz + \
+				decode_sequence_maxsz + \
 				decode_putfh_maxsz + \
 				decode_access_maxsz + \
 				decode_getattr_maxsz)
 #define NFS4_enc_getattr_sz	(compound_encode_hdr_maxsz + \
+				encode_sequence_maxsz + \
 				encode_putfh_maxsz + \
 				encode_getattr_maxsz)
 #define NFS4_dec_getattr_sz	(compound_decode_hdr_maxsz + \
+				decode_sequence_maxsz + \
 				decode_putfh_maxsz + \
 				decode_getattr_maxsz)
 #define NFS4_enc_lookup_sz	(compound_encode_hdr_maxsz + \
+				encode_sequence_maxsz + \
 				encode_putfh_maxsz + \
 				encode_lookup_maxsz + \
 				encode_getattr_maxsz + \
 				encode_getfh_maxsz)
 #define NFS4_dec_lookup_sz	(compound_decode_hdr_maxsz + \
+				decode_sequence_maxsz + \
 				decode_putfh_maxsz + \
 				decode_lookup_maxsz + \
 				decode_getattr_maxsz + \
 				decode_getfh_maxsz)
 #define NFS4_enc_lookup_root_sz (compound_encode_hdr_maxsz + \
+				encode_sequence_maxsz + \
 				encode_putrootfh_maxsz + \
 				encode_getattr_maxsz + \
 				encode_getfh_maxsz)
 #define NFS4_dec_lookup_root_sz (compound_decode_hdr_maxsz + \
+				decode_sequence_maxsz + \
 				decode_putrootfh_maxsz + \
 				decode_getattr_maxsz + \
 				decode_getfh_maxsz)
 #define NFS4_enc_remove_sz	(compound_encode_hdr_maxsz + \
+				encode_sequence_maxsz + \
 				encode_putfh_maxsz + \
 				encode_remove_maxsz + \
 				encode_getattr_maxsz)
 #define NFS4_dec_remove_sz	(compound_decode_hdr_maxsz + \
+				decode_sequence_maxsz + \
 				decode_putfh_maxsz + \
-				op_decode_hdr_maxsz + 5 + \
+				decode_remove_maxsz + \
 				decode_getattr_maxsz)
 #define NFS4_enc_rename_sz	(compound_encode_hdr_maxsz + \
+				encode_sequence_maxsz + \
 				encode_putfh_maxsz + \
 				encode_savefh_maxsz + \
 				encode_putfh_maxsz + \
@@ -425,6 +529,7 @@ static int nfs4_stat_to_errno(int);
 				encode_restorefh_maxsz + \
 				encode_getattr_maxsz)
 #define NFS4_dec_rename_sz	(compound_decode_hdr_maxsz + \
+				decode_sequence_maxsz + \
 				decode_putfh_maxsz + \
 				decode_savefh_maxsz + \
 				decode_putfh_maxsz + \
@@ -433,6 +538,7 @@ static int nfs4_stat_to_errno(int);
 				decode_restorefh_maxsz + \
 				decode_getattr_maxsz)
 #define NFS4_enc_link_sz	(compound_encode_hdr_maxsz + \
+				encode_sequence_maxsz + \
 				encode_putfh_maxsz + \
 				encode_savefh_maxsz + \
 				encode_putfh_maxsz + \
@@ -441,6 +547,7 @@ static int nfs4_stat_to_errno(int);
 				encode_restorefh_maxsz + \
 				decode_getattr_maxsz)
 #define NFS4_dec_link_sz	(compound_decode_hdr_maxsz + \
+				decode_sequence_maxsz + \
 				decode_putfh_maxsz + \
 				decode_savefh_maxsz + \
 				decode_putfh_maxsz + \
@@ -449,16 +556,19 @@ static int nfs4_stat_to_errno(int);
 				decode_restorefh_maxsz + \
 				decode_getattr_maxsz)
 #define NFS4_enc_symlink_sz	(compound_encode_hdr_maxsz + \
+				encode_sequence_maxsz + \
 				encode_putfh_maxsz + \
 				encode_symlink_maxsz + \
 				encode_getattr_maxsz + \
 				encode_getfh_maxsz)
 #define NFS4_dec_symlink_sz	(compound_decode_hdr_maxsz + \
+				decode_sequence_maxsz + \
 				decode_putfh_maxsz + \
 				decode_symlink_maxsz + \
 				decode_getattr_maxsz + \
 				decode_getfh_maxsz)
 #define NFS4_enc_create_sz	(compound_encode_hdr_maxsz + \
+				encode_sequence_maxsz + \
 				encode_putfh_maxsz + \
 				encode_savefh_maxsz + \
 				encode_create_maxsz + \
@@ -467,6 +577,7 @@ static int nfs4_stat_to_errno(int);
 				encode_restorefh_maxsz + \
 				encode_getattr_maxsz)
 #define NFS4_dec_create_sz	(compound_decode_hdr_maxsz + \
+				decode_sequence_maxsz + \
 				decode_putfh_maxsz + \
 				decode_savefh_maxsz + \
 				decode_create_maxsz + \
@@ -475,52 +586,98 @@ static int nfs4_stat_to_errno(int);
 				decode_restorefh_maxsz + \
 				decode_getattr_maxsz)
 #define NFS4_enc_pathconf_sz	(compound_encode_hdr_maxsz + \
+				encode_sequence_maxsz + \
 				encode_putfh_maxsz + \
 				encode_getattr_maxsz)
 #define NFS4_dec_pathconf_sz	(compound_decode_hdr_maxsz + \
+				decode_sequence_maxsz + \
 				decode_putfh_maxsz + \
 				decode_getattr_maxsz)
 #define NFS4_enc_statfs_sz	(compound_encode_hdr_maxsz + \
+				encode_sequence_maxsz + \
 				encode_putfh_maxsz + \
 				encode_statfs_maxsz)
 #define NFS4_dec_statfs_sz	(compound_decode_hdr_maxsz + \
+				decode_sequence_maxsz + \
 				decode_putfh_maxsz + \
 				decode_statfs_maxsz)
 #define NFS4_enc_server_caps_sz (compound_encode_hdr_maxsz + \
+				encode_sequence_maxsz + \
 				encode_putfh_maxsz + \
 				encode_getattr_maxsz)
 #define NFS4_dec_server_caps_sz (compound_decode_hdr_maxsz + \
+				decode_sequence_maxsz + \
 				decode_putfh_maxsz + \
 				decode_getattr_maxsz)
 #define NFS4_enc_delegreturn_sz	(compound_encode_hdr_maxsz + \
+				encode_sequence_maxsz + \
 				encode_putfh_maxsz + \
 				encode_delegreturn_maxsz + \
 				encode_getattr_maxsz)
 #define NFS4_dec_delegreturn_sz (compound_decode_hdr_maxsz + \
+				decode_sequence_maxsz + \
 				decode_delegreturn_maxsz + \
 				decode_getattr_maxsz)
 #define NFS4_enc_getacl_sz	(compound_encode_hdr_maxsz + \
+				encode_sequence_maxsz + \
 				encode_putfh_maxsz + \
 				encode_getacl_maxsz)
 #define NFS4_dec_getacl_sz	(compound_decode_hdr_maxsz + \
+				decode_sequence_maxsz + \
 				decode_putfh_maxsz + \
 				decode_getacl_maxsz)
 #define NFS4_enc_setacl_sz	(compound_encode_hdr_maxsz + \
+				encode_sequence_maxsz + \
 				encode_putfh_maxsz + \
 				encode_setacl_maxsz)
 #define NFS4_dec_setacl_sz	(compound_decode_hdr_maxsz + \
+				decode_sequence_maxsz + \
 				decode_putfh_maxsz + \
 				decode_setacl_maxsz)
 #define NFS4_enc_fs_locations_sz \
 				(compound_encode_hdr_maxsz + \
+				 encode_sequence_maxsz + \
 				 encode_putfh_maxsz + \
 				 encode_lookup_maxsz + \
 				 encode_fs_locations_maxsz)
 #define NFS4_dec_fs_locations_sz \
 				(compound_decode_hdr_maxsz + \
+				 decode_sequence_maxsz + \
 				 decode_putfh_maxsz + \
 				 decode_lookup_maxsz + \
 				 decode_fs_locations_maxsz)
+#if defined(CONFIG_NFS_V4_1)
+#define NFS4_enc_exchange_id_sz \
+				(compound_encode_hdr_maxsz + \
+				 encode_exchange_id_maxsz)
+#define NFS4_dec_exchange_id_sz \
+				(compound_decode_hdr_maxsz + \
+				 decode_exchange_id_maxsz)
+#define NFS4_enc_create_session_sz \
+				(compound_encode_hdr_maxsz + \
+				 encode_create_session_maxsz)
+#define NFS4_dec_create_session_sz \
+				(compound_decode_hdr_maxsz + \
+				 decode_create_session_maxsz)
+#define NFS4_enc_destroy_session_sz	(compound_encode_hdr_maxsz + \
+					 encode_destroy_session_maxsz)
+#define NFS4_dec_destroy_session_sz	(compound_decode_hdr_maxsz + \
+					 decode_destroy_session_maxsz)
+#define NFS4_enc_sequence_sz \
+				(compound_decode_hdr_maxsz + \
+				 encode_sequence_maxsz)
+#define NFS4_dec_sequence_sz \
+				(compound_decode_hdr_maxsz + \
+				 decode_sequence_maxsz)
+#define NFS4_enc_get_lease_time_sz	(compound_encode_hdr_maxsz + \
+					 encode_sequence_maxsz + \
+					 encode_putrootfh_maxsz + \
+					 encode_fsinfo_maxsz)
+#define NFS4_dec_get_lease_time_sz	(compound_decode_hdr_maxsz + \
+					 decode_sequence_maxsz + \
+					 decode_putrootfh_maxsz + \
+					 decode_fsinfo_maxsz)
+#endif /* CONFIG_NFS_V4_1 */
 
 static const umode_t nfs_type2fmt[] = {
 	[NF4BAD] = 0,
@@ -541,6 +698,8 @@ struct compound_hdr {
 	__be32 *	nops_p;
 	uint32_t	taglen;
 	char *		tag;
+	uint32_t	replen;		/* expected reply words */
+	u32		minorversion;
 };
 
 /*
@@ -576,22 +735,31 @@ static void encode_string(struct xdr_stream *xdr, unsigned int len, const char *
 	xdr_encode_opaque(p, str, len);
 }
 
-static void encode_compound_hdr(struct xdr_stream *xdr, struct compound_hdr *hdr)
+static void encode_compound_hdr(struct xdr_stream *xdr,
+				struct rpc_rqst *req,
+				struct compound_hdr *hdr)
 {
 	__be32 *p;
+	struct rpc_auth *auth = req->rq_task->tk_msg.rpc_cred->cr_auth;
+
+	/* initialize running count of expected bytes in reply.
+	 * NOTE: the replied tag SHOULD be the same is the one sent,
+	 * but this is not required as a MUST for the server to do so. */
+	hdr->replen = RPC_REPHDRSIZE + auth->au_rslack + 3 + hdr->taglen;
 
 	dprintk("encode_compound: tag=%.*s\n", (int)hdr->taglen, hdr->tag);
 	BUG_ON(hdr->taglen > NFS4_MAXTAGLEN);
 	RESERVE_SPACE(12+(XDR_QUADLEN(hdr->taglen)<<2));
 	WRITE32(hdr->taglen);
 	WRITEMEM(hdr->tag, hdr->taglen);
-	WRITE32(NFS4_MINOR_VERSION);
+	WRITE32(hdr->minorversion);
 	hdr->nops_p = p;
 	WRITE32(hdr->nops);
 }
 
 static void encode_nops(struct compound_hdr *hdr)
 {
+	BUG_ON(hdr->nops > NFS4_MAX_OPS);
 	*hdr->nops_p = htonl(hdr->nops);
 }
 
@@ -736,6 +904,7 @@ static void encode_access(struct xdr_stream *xdr, u32 access, struct compound_hd
 	WRITE32(OP_ACCESS);
 	WRITE32(access);
 	hdr->nops++;
+	hdr->replen += decode_access_maxsz;
 }
 
 static void encode_close(struct xdr_stream *xdr, const struct nfs_closeargs *arg, struct compound_hdr *hdr)
@@ -747,6 +916,7 @@ static void encode_close(struct xdr_stream *xdr, const struct nfs_closeargs *arg
 	WRITE32(arg->seqid->sequence->counter);
 	WRITEMEM(arg->stateid->data, NFS4_STATEID_SIZE);
 	hdr->nops++;
+	hdr->replen += decode_close_maxsz;
 }
 
 static void encode_commit(struct xdr_stream *xdr, const struct nfs_writeargs *args, struct compound_hdr *hdr)
@@ -758,6 +928,7 @@ static void encode_commit(struct xdr_stream *xdr, const struct nfs_writeargs *ar
 	WRITE64(args->offset);
 	WRITE32(args->count);
 	hdr->nops++;
+	hdr->replen += decode_commit_maxsz;
 }
 
 static void encode_create(struct xdr_stream *xdr, const struct nfs4_create_arg *create, struct compound_hdr *hdr)
@@ -789,6 +960,7 @@ static void encode_create(struct xdr_stream *xdr, const struct nfs4_create_arg *
 	WRITE32(create->name->len);
 	WRITEMEM(create->name->name, create->name->len);
 	hdr->nops++;
+	hdr->replen += decode_create_maxsz;
 
 	encode_attrs(xdr, create->attrs, create->server);
 }
@@ -802,6 +974,7 @@ static void encode_getattr_one(struct xdr_stream *xdr, uint32_t bitmap, struct c
 	WRITE32(1);
 	WRITE32(bitmap);
 	hdr->nops++;
+	hdr->replen += decode_getattr_maxsz;
 }
 
 static void encode_getattr_two(struct xdr_stream *xdr, uint32_t bm0, uint32_t bm1, struct compound_hdr *hdr)
@@ -814,6 +987,7 @@ static void encode_getattr_two(struct xdr_stream *xdr, uint32_t bm0, uint32_t bm
 	WRITE32(bm0);
 	WRITE32(bm1);
 	hdr->nops++;
+	hdr->replen += decode_getattr_maxsz;
 }
 
 static void encode_getfattr(struct xdr_stream *xdr, const u32* bitmask, struct compound_hdr *hdr)
@@ -841,6 +1015,7 @@ static void encode_getfh(struct xdr_stream *xdr, struct compound_hdr *hdr)
 	RESERVE_SPACE(4);
 	WRITE32(OP_GETFH);
 	hdr->nops++;
+	hdr->replen += decode_getfh_maxsz;
 }
 
 static void encode_link(struct xdr_stream *xdr, const struct qstr *name, struct compound_hdr *hdr)
@@ -852,6 +1027,7 @@ static void encode_link(struct xdr_stream *xdr, const struct qstr *name, struct
 	WRITE32(name->len);
 	WRITEMEM(name->name, name->len);
 	hdr->nops++;
+	hdr->replen += decode_link_maxsz;
 }
 
 static inline int nfs4_lock_type(struct file_lock *fl, int block)
@@ -899,6 +1075,7 @@ static void encode_lock(struct xdr_stream *xdr, const struct nfs_lock_args *args
 		WRITE32(args->lock_seqid->sequence->counter);
 	}
 	hdr->nops++;
+	hdr->replen += decode_lock_maxsz;
 }
 
 static void encode_lockt(struct xdr_stream *xdr, const struct nfs_lockt_args *args, struct compound_hdr *hdr)
@@ -915,6 +1092,7 @@ static void encode_lockt(struct xdr_stream *xdr, const struct nfs_lockt_args *ar
 	WRITEMEM("lock id:", 8);
 	WRITE64(args->lock_owner.id);
 	hdr->nops++;
+	hdr->replen += decode_lockt_maxsz;
 }
 
 static void encode_locku(struct xdr_stream *xdr, const struct nfs_locku_args *args, struct compound_hdr *hdr)
@@ -929,6 +1107,7 @@ static void encode_locku(struct xdr_stream *xdr, const struct nfs_locku_args *ar
 	WRITE64(args->fl->fl_start);
 	WRITE64(nfs4_lock_length(args->fl));
 	hdr->nops++;
+	hdr->replen += decode_locku_maxsz;
 }
 
 static void encode_lookup(struct xdr_stream *xdr, const struct qstr *name, struct compound_hdr *hdr)
@@ -941,6 +1120,7 @@ static void encode_lookup(struct xdr_stream *xdr, const struct qstr *name, struc
 	WRITE32(len);
 	WRITEMEM(name->name, len);
 	hdr->nops++;
+	hdr->replen += decode_lookup_maxsz;
 }
 
 static void encode_share_access(struct xdr_stream *xdr, fmode_t fmode)
@@ -1080,6 +1260,7 @@ static void encode_open(struct xdr_stream *xdr, const struct nfs_openargs *arg,
 		BUG();
 	}
 	hdr->nops++;
+	hdr->replen += decode_open_maxsz;
 }
 
 static void encode_open_confirm(struct xdr_stream *xdr, const struct nfs_open_confirmargs *arg, struct compound_hdr *hdr)
@@ -1091,6 +1272,7 @@ static void encode_open_confirm(struct xdr_stream *xdr, const struct nfs_open_co
 	WRITEMEM(arg->stateid->data, NFS4_STATEID_SIZE);
 	WRITE32(arg->seqid->sequence->counter);
 	hdr->nops++;
+	hdr->replen += decode_open_confirm_maxsz;
 }
 
 static void encode_open_downgrade(struct xdr_stream *xdr, const struct nfs_closeargs *arg, struct compound_hdr *hdr)
@@ -1103,6 +1285,7 @@ static void encode_open_downgrade(struct xdr_stream *xdr, const struct nfs_close
 	WRITE32(arg->seqid->sequence->counter);
 	encode_share_access(xdr, arg->fmode);
 	hdr->nops++;
+	hdr->replen += decode_open_downgrade_maxsz;
 }
 
 static void
@@ -1116,6 +1299,7 @@ encode_putfh(struct xdr_stream *xdr, const struct nfs_fh *fh, struct compound_hd
 	WRITE32(len);
 	WRITEMEM(fh->data, len);
 	hdr->nops++;
+	hdr->replen += decode_putfh_maxsz;
 }
 
 static void encode_putrootfh(struct xdr_stream *xdr, struct compound_hdr *hdr)
@@ -1125,6 +1309,7 @@ static void encode_putrootfh(struct xdr_stream *xdr, struct compound_hdr *hdr)
 	RESERVE_SPACE(4);
 	WRITE32(OP_PUTROOTFH);
 	hdr->nops++;
+	hdr->replen += decode_putrootfh_maxsz;
 }
 
 static void encode_stateid(struct xdr_stream *xdr, const struct nfs_open_context *ctx)
@@ -1153,6 +1338,7 @@ static void encode_read(struct xdr_stream *xdr, const struct nfs_readargs *args,
 	WRITE64(args->offset);
 	WRITE32(args->count);
 	hdr->nops++;
+	hdr->replen += decode_read_maxsz;
 }
 
 static void encode_readdir(struct xdr_stream *xdr, const struct nfs4_readdir_arg *readdir, struct rpc_rqst *req, struct compound_hdr *hdr)
@@ -1178,6 +1364,7 @@ static void encode_readdir(struct xdr_stream *xdr, const struct nfs4_readdir_arg
 	WRITE32(attrs[0] & readdir->bitmask[0]);
 	WRITE32(attrs[1] & readdir->bitmask[1]);
 	hdr->nops++;
+	hdr->replen += decode_readdir_maxsz;
 	dprintk("%s: cookie = %Lu, verifier = %08x:%08x, bitmap = %08x:%08x\n",
 			__func__,
 			(unsigned long long)readdir->cookie,
@@ -1194,6 +1381,7 @@ static void encode_readlink(struct xdr_stream *xdr, const struct nfs4_readlink *
 	RESERVE_SPACE(4);
 	WRITE32(OP_READLINK);
 	hdr->nops++;
+	hdr->replen += decode_readlink_maxsz;
 }
 
 static void encode_remove(struct xdr_stream *xdr, const struct qstr *name, struct compound_hdr *hdr)
@@ -1205,6 +1393,7 @@ static void encode_remove(struct xdr_stream *xdr, const struct qstr *name, struc
 	WRITE32(name->len);
 	WRITEMEM(name->name, name->len);
 	hdr->nops++;
+	hdr->replen += decode_remove_maxsz;
 }
 
 static void encode_rename(struct xdr_stream *xdr, const struct qstr *oldname, const struct qstr *newname, struct compound_hdr *hdr)
@@ -1220,6 +1409,7 @@ static void encode_rename(struct xdr_stream *xdr, const struct qstr *oldname, co
 	WRITE32(newname->len);
 	WRITEMEM(newname->name, newname->len);
 	hdr->nops++;
+	hdr->replen += decode_rename_maxsz;
 }
 
 static void encode_renew(struct xdr_stream *xdr, const struct nfs_client *client_stateid, struct compound_hdr *hdr)
@@ -1230,6 +1420,7 @@ static void encode_renew(struct xdr_stream *xdr, const struct nfs_client *client
 	WRITE32(OP_RENEW);
 	WRITE64(client_stateid->cl_clientid);
 	hdr->nops++;
+	hdr->replen += decode_renew_maxsz;
 }
 
 static void
@@ -1240,6 +1431,7 @@ encode_restorefh(struct xdr_stream *xdr, struct compound_hdr *hdr)
 	RESERVE_SPACE(4);
 	WRITE32(OP_RESTOREFH);
 	hdr->nops++;
+	hdr->replen += decode_restorefh_maxsz;
 }
 
 static int
@@ -1259,6 +1451,7 @@ encode_setacl(struct xdr_stream *xdr, struct nfs_setaclargs *arg, struct compoun
 	WRITE32(arg->acl_len);
 	xdr_write_pages(xdr, arg->acl_pages, arg->acl_pgbase, arg->acl_len);
 	hdr->nops++;
+	hdr->replen += decode_setacl_maxsz;
 	return 0;
 }
 
@@ -1270,6 +1463,7 @@ encode_savefh(struct xdr_stream *xdr, struct compound_hdr *hdr)
 	RESERVE_SPACE(4);
 	WRITE32(OP_SAVEFH);
 	hdr->nops++;
+	hdr->replen += decode_savefh_maxsz;
 }
 
 static void encode_setattr(struct xdr_stream *xdr, const struct nfs_setattrargs *arg, const struct nfs_server *server, struct compound_hdr *hdr)
@@ -1280,6 +1474,7 @@ static void encode_setattr(struct xdr_stream *xdr, const struct nfs_setattrargs
 	WRITE32(OP_SETATTR);
 	WRITEMEM(arg->stateid.data, NFS4_STATEID_SIZE);
 	hdr->nops++;
+	hdr->replen += decode_setattr_maxsz;
 	encode_attrs(xdr, arg->iap, server);
 }
 
@@ -1299,6 +1494,7 @@ static void encode_setclientid(struct xdr_stream *xdr, const struct nfs4_setclie
 	RESERVE_SPACE(4);
 	WRITE32(setclientid->sc_cb_ident);
 	hdr->nops++;
+	hdr->replen += decode_setclientid_maxsz;
 }
 
 static void encode_setclientid_confirm(struct xdr_stream *xdr, const struct nfs_client *client_state, struct compound_hdr *hdr)
@@ -1310,6 +1506,7 @@ static void encode_setclientid_confirm(struct xdr_stream *xdr, const struct nfs_
 	WRITE64(client_state->cl_clientid);
 	WRITEMEM(client_state->cl_confirm.data, NFS4_VERIFIER_SIZE);
 	hdr->nops++;
+	hdr->replen += decode_setclientid_confirm_maxsz;
 }
 
 static void encode_write(struct xdr_stream *xdr, const struct nfs_writeargs *args, struct compound_hdr *hdr)
@@ -1328,6 +1525,7 @@ static void encode_write(struct xdr_stream *xdr, const struct nfs_writeargs *arg
 
 	xdr_write_pages(xdr, args->pages, args->pgbase, args->count);
 	hdr->nops++;
+	hdr->replen += decode_write_maxsz;
 }
 
 static void encode_delegreturn(struct xdr_stream *xdr, const nfs4_stateid *stateid, struct compound_hdr *hdr)
@@ -1339,11 +1537,163 @@ static void encode_delegreturn(struct xdr_stream *xdr, const nfs4_stateid *state
 	WRITE32(OP_DELEGRETURN);
 	WRITEMEM(stateid->data, NFS4_STATEID_SIZE);
 	hdr->nops++;
+	hdr->replen += decode_delegreturn_maxsz;
+}
+
+#if defined(CONFIG_NFS_V4_1)
+/* NFSv4.1 operations */
+static void encode_exchange_id(struct xdr_stream *xdr,
+			       struct nfs41_exchange_id_args *args,
+			       struct compound_hdr *hdr)
+{
+	__be32 *p;
+
+	RESERVE_SPACE(4 + sizeof(args->verifier->data));
+	WRITE32(OP_EXCHANGE_ID);
+	WRITEMEM(args->verifier->data, sizeof(args->verifier->data));
+
+	encode_string(xdr, args->id_len, args->id);
+
+	RESERVE_SPACE(12);
+	WRITE32(args->flags);
+	WRITE32(0);	/* zero length state_protect4_a */
+	WRITE32(0);	/* zero length implementation id array */
+	hdr->nops++;
+	hdr->replen += decode_exchange_id_maxsz;
+}
+
+static void encode_create_session(struct xdr_stream *xdr,
+				  struct nfs41_create_session_args *args,
+				  struct compound_hdr *hdr)
+{
+	__be32 *p;
+	char machine_name[NFS4_MAX_MACHINE_NAME_LEN];
+	uint32_t len;
+	struct nfs_client *clp = args->client;
+
+	RESERVE_SPACE(4);
+	WRITE32(OP_CREATE_SESSION);
+
+	RESERVE_SPACE(8);
+	WRITE64(clp->cl_ex_clid);
+
+	RESERVE_SPACE(8);
+	WRITE32(clp->cl_seqid);			/*Sequence id */
+	WRITE32(args->flags);			/*flags */
+
+	RESERVE_SPACE(2*28);			/* 2 channel_attrs */
+	/* Fore Channel */
+	WRITE32(args->fc_attrs.headerpadsz);	/* header padding size */
+	WRITE32(args->fc_attrs.max_rqst_sz);	/* max req size */
+	WRITE32(args->fc_attrs.max_resp_sz);	/* max resp size */
+	WRITE32(args->fc_attrs.max_resp_sz_cached);	/* Max resp sz cached */
+	WRITE32(args->fc_attrs.max_ops);	/* max operations */
+	WRITE32(args->fc_attrs.max_reqs);	/* max requests */
+	WRITE32(0);				/* rdmachannel_attrs */
+
+	/* Back Channel */
+	WRITE32(args->fc_attrs.headerpadsz);	/* header padding size */
+	WRITE32(args->bc_attrs.max_rqst_sz);	/* max req size */
+	WRITE32(args->bc_attrs.max_resp_sz);	/* max resp size */
+	WRITE32(args->bc_attrs.max_resp_sz_cached);	/* Max resp sz cached */
+	WRITE32(args->bc_attrs.max_ops);	/* max operations */
+	WRITE32(args->bc_attrs.max_reqs);	/* max requests */
+	WRITE32(0);				/* rdmachannel_attrs */
+
+	RESERVE_SPACE(4);
+	WRITE32(args->cb_program);		/* cb_program */
+
+	RESERVE_SPACE(4);			/* # of security flavors */
+	WRITE32(1);
+
+	RESERVE_SPACE(4);
+	WRITE32(RPC_AUTH_UNIX);			/* auth_sys */
+
+	/* authsys_parms rfc1831 */
+	RESERVE_SPACE(4);
+	WRITE32((u32)clp->cl_boot_time.tv_nsec);	/* stamp */
+	len = scnprintf(machine_name, sizeof(machine_name), "%s",
+			clp->cl_ipaddr);
+	RESERVE_SPACE(16 + len);
+	WRITE32(len);
+	WRITEMEM(machine_name, len);
+	WRITE32(0);				/* UID */
+	WRITE32(0);				/* GID */
+	WRITE32(0);				/* No more gids */
+	hdr->nops++;
+	hdr->replen += decode_create_session_maxsz;
+}
+
+static void encode_destroy_session(struct xdr_stream *xdr,
+				   struct nfs4_session *session,
+				   struct compound_hdr *hdr)
+{
+	__be32 *p;
+	RESERVE_SPACE(4 + NFS4_MAX_SESSIONID_LEN);
+	WRITE32(OP_DESTROY_SESSION);
+	WRITEMEM(session->sess_id.data, NFS4_MAX_SESSIONID_LEN);
+	hdr->nops++;
+	hdr->replen += decode_destroy_session_maxsz;
 }
+#endif /* CONFIG_NFS_V4_1 */
+
+static void encode_sequence(struct xdr_stream *xdr,
+			    const struct nfs4_sequence_args *args,
+			    struct compound_hdr *hdr)
+{
+#if defined(CONFIG_NFS_V4_1)
+	struct nfs4_session *session = args->sa_session;
+	struct nfs4_slot_table *tp;
+	struct nfs4_slot *slot;
+	__be32 *p;
+
+	if (!session)
+		return;
+
+	tp = &session->fc_slot_table;
+
+	WARN_ON(args->sa_slotid == NFS4_MAX_SLOT_TABLE);
+	slot = tp->slots + args->sa_slotid;
+
+	RESERVE_SPACE(4);
+	WRITE32(OP_SEQUENCE);
+
+	/*
+	 * Sessionid + seqid + slotid + max slotid + cache_this
+	 */
+	dprintk("%s: sessionid=%u:%u:%u:%u seqid=%d slotid=%d "
+		"max_slotid=%d cache_this=%d\n",
+		__func__,
+		((u32 *)session->sess_id.data)[0],
+		((u32 *)session->sess_id.data)[1],
+		((u32 *)session->sess_id.data)[2],
+		((u32 *)session->sess_id.data)[3],
+		slot->seq_nr, args->sa_slotid,
+		tp->highest_used_slotid, args->sa_cache_this);
+	RESERVE_SPACE(NFS4_MAX_SESSIONID_LEN + 16);
+	WRITEMEM(session->sess_id.data, NFS4_MAX_SESSIONID_LEN);
+	WRITE32(slot->seq_nr);
+	WRITE32(args->sa_slotid);
+	WRITE32(tp->highest_used_slotid);
+	WRITE32(args->sa_cache_this);
+	hdr->nops++;
+	hdr->replen += decode_sequence_maxsz;
+#endif /* CONFIG_NFS_V4_1 */
+}
+
 /*
  * END OF "GENERIC" ENCODE ROUTINES.
  */
 
+static u32 nfs4_xdr_minorversion(const struct nfs4_sequence_args *args)
+{
+#if defined(CONFIG_NFS_V4_1)
+	if (args->sa_session)
+		return args->sa_session->clp->cl_minorversion;
+#endif /* CONFIG_NFS_V4_1 */
+	return 0;
+}
+
 /*
  * Encode an ACCESS request
  */
@@ -1351,11 +1701,12 @@ static int nfs4_xdr_enc_access(struct rpc_rqst *req, __be32 *p, const struct nfs
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.nops = 0,
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->seq_args, &hdr);
 	encode_putfh(&xdr, args->fh, &hdr);
 	encode_access(&xdr, args->access, &hdr);
 	encode_getfattr(&xdr, args->bitmask, &hdr);
@@ -1370,11 +1721,12 @@ static int nfs4_xdr_enc_lookup(struct rpc_rqst *req, __be32 *p, const struct nfs
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.nops = 0,
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->seq_args, &hdr);
 	encode_putfh(&xdr, args->dir_fh, &hdr);
 	encode_lookup(&xdr, args->name, &hdr);
 	encode_getfh(&xdr, &hdr);
@@ -1390,11 +1742,12 @@ static int nfs4_xdr_enc_lookup_root(struct rpc_rqst *req, __be32 *p, const struc
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.nops = 0,
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->seq_args, &hdr);
 	encode_putrootfh(&xdr, &hdr);
 	encode_getfh(&xdr, &hdr);
 	encode_getfattr(&xdr, args->bitmask, &hdr);
@@ -1409,11 +1762,12 @@ static int nfs4_xdr_enc_remove(struct rpc_rqst *req, __be32 *p, const struct nfs
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.nops = 0,
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->seq_args, &hdr);
 	encode_putfh(&xdr, args->fh, &hdr);
 	encode_remove(&xdr, &args->name, &hdr);
 	encode_getfattr(&xdr, args->bitmask, &hdr);
@@ -1428,11 +1782,12 @@ static int nfs4_xdr_enc_rename(struct rpc_rqst *req, __be32 *p, const struct nfs
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.nops = 0,
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->seq_args, &hdr);
 	encode_putfh(&xdr, args->old_dir, &hdr);
 	encode_savefh(&xdr, &hdr);
 	encode_putfh(&xdr, args->new_dir, &hdr);
@@ -1451,11 +1806,12 @@ static int nfs4_xdr_enc_link(struct rpc_rqst *req, __be32 *p, const struct nfs4_
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.nops = 0,
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->seq_args, &hdr);
 	encode_putfh(&xdr, args->fh, &hdr);
 	encode_savefh(&xdr, &hdr);
 	encode_putfh(&xdr, args->dir_fh, &hdr);
@@ -1474,11 +1830,12 @@ static int nfs4_xdr_enc_create(struct rpc_rqst *req, __be32 *p, const struct nfs
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.nops = 0,
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->seq_args, &hdr);
 	encode_putfh(&xdr, args->dir_fh, &hdr);
 	encode_savefh(&xdr, &hdr);
 	encode_create(&xdr, args, &hdr);
@@ -1505,11 +1862,12 @@ static int nfs4_xdr_enc_getattr(struct rpc_rqst *req, __be32 *p, const struct nf
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.nops = 0,
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->seq_args, &hdr);
 	encode_putfh(&xdr, args->fh, &hdr);
 	encode_getfattr(&xdr, args->bitmask, &hdr);
 	encode_nops(&hdr);
@@ -1523,11 +1881,12 @@ static int nfs4_xdr_enc_close(struct rpc_rqst *req, __be32 *p, struct nfs_closea
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.nops   = 0,
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->seq_args, &hdr);
 	encode_putfh(&xdr, args->fh, &hdr);
 	encode_close(&xdr, args, &hdr);
 	encode_getfattr(&xdr, args->bitmask, &hdr);
@@ -1542,11 +1901,12 @@ static int nfs4_xdr_enc_open(struct rpc_rqst *req, __be32 *p, struct nfs_openarg
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.nops = 0,
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->seq_args, &hdr);
 	encode_putfh(&xdr, args->fh, &hdr);
 	encode_savefh(&xdr, &hdr);
 	encode_open(&xdr, args, &hdr);
@@ -1569,7 +1929,7 @@ static int nfs4_xdr_enc_open_confirm(struct rpc_rqst *req, __be32 *p, struct nfs
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
 	encode_putfh(&xdr, args->fh, &hdr);
 	encode_open_confirm(&xdr, args, &hdr);
 	encode_nops(&hdr);
@@ -1583,11 +1943,12 @@ static int nfs4_xdr_enc_open_noattr(struct rpc_rqst *req, __be32 *p, struct nfs_
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.nops   = 0,
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->seq_args, &hdr);
 	encode_putfh(&xdr, args->fh, &hdr);
 	encode_open(&xdr, args, &hdr);
 	encode_getfattr(&xdr, args->bitmask, &hdr);
@@ -1602,11 +1963,12 @@ static int nfs4_xdr_enc_open_downgrade(struct rpc_rqst *req, __be32 *p, struct n
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.nops	= 0,
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->seq_args, &hdr);
 	encode_putfh(&xdr, args->fh, &hdr);
 	encode_open_downgrade(&xdr, args, &hdr);
 	encode_getfattr(&xdr, args->bitmask, &hdr);
@@ -1621,11 +1983,12 @@ static int nfs4_xdr_enc_lock(struct rpc_rqst *req, __be32 *p, struct nfs_lock_ar
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.nops   = 0,
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->seq_args, &hdr);
 	encode_putfh(&xdr, args->fh, &hdr);
 	encode_lock(&xdr, args, &hdr);
 	encode_nops(&hdr);
@@ -1639,11 +2002,12 @@ static int nfs4_xdr_enc_lockt(struct rpc_rqst *req, __be32 *p, struct nfs_lockt_
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.nops   = 0,
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->seq_args, &hdr);
 	encode_putfh(&xdr, args->fh, &hdr);
 	encode_lockt(&xdr, args, &hdr);
 	encode_nops(&hdr);
@@ -1657,11 +2021,12 @@ static int nfs4_xdr_enc_locku(struct rpc_rqst *req, __be32 *p, struct nfs_locku_
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.nops   = 0,
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->seq_args, &hdr);
 	encode_putfh(&xdr, args->fh, &hdr);
 	encode_locku(&xdr, args, &hdr);
 	encode_nops(&hdr);
@@ -1675,22 +2040,16 @@ static int nfs4_xdr_enc_readlink(struct rpc_rqst *req, __be32 *p, const struct n
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.nops = 0,
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
 	};
-	struct rpc_auth *auth = req->rq_task->tk_msg.rpc_cred->cr_auth;
-	unsigned int replen;
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->seq_args, &hdr);
 	encode_putfh(&xdr, args->fh, &hdr);
 	encode_readlink(&xdr, args, req, &hdr);
 
-	/* set up reply kvec
-	 *    toplevel_status + taglen + rescount + OP_PUTFH + status
-	 *      + OP_READLINK + status + string length = 8
-	 */
-	replen = (RPC_REPHDRSIZE + auth->au_rslack + NFS4_dec_readlink_sz) << 2;
-	xdr_inline_pages(&req->rq_rcv_buf, replen, args->pages,
+	xdr_inline_pages(&req->rq_rcv_buf, hdr.replen << 2, args->pages,
 			args->pgbase, args->pglen);
 	encode_nops(&hdr);
 	return 0;
@@ -1703,25 +2062,19 @@ static int nfs4_xdr_enc_readdir(struct rpc_rqst *req, __be32 *p, const struct nf
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.nops = 0,
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
 	};
-	struct rpc_auth *auth = req->rq_task->tk_msg.rpc_cred->cr_auth;
-	int replen;
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->seq_args, &hdr);
 	encode_putfh(&xdr, args->fh, &hdr);
 	encode_readdir(&xdr, args, req, &hdr);
 
-	/* set up reply kvec
-	 *    toplevel_status + taglen + rescount + OP_PUTFH + status
-	 *      + OP_READDIR + status + verifer(2)  = 9
-	 */
-	replen = (RPC_REPHDRSIZE + auth->au_rslack + NFS4_dec_readdir_sz) << 2;
-	xdr_inline_pages(&req->rq_rcv_buf, replen, args->pages,
+	xdr_inline_pages(&req->rq_rcv_buf, hdr.replen << 2, args->pages,
 			 args->pgbase, args->count);
 	dprintk("%s: inlined page args = (%u, %p, %u, %u)\n",
-			__func__, replen, args->pages,
+			__func__, hdr.replen << 2, args->pages,
 			args->pgbase, args->count);
 	encode_nops(&hdr);
 	return 0;
@@ -1732,24 +2085,18 @@ static int nfs4_xdr_enc_readdir(struct rpc_rqst *req, __be32 *p, const struct nf
  */
 static int nfs4_xdr_enc_read(struct rpc_rqst *req, __be32 *p, struct nfs_readargs *args)
 {
-	struct rpc_auth *auth = req->rq_task->tk_msg.rpc_cred->cr_auth;
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.nops = 0,
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
 	};
-	int replen;
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->seq_args, &hdr);
 	encode_putfh(&xdr, args->fh, &hdr);
 	encode_read(&xdr, args, &hdr);
 
-	/* set up reply kvec
-	 *    toplevel status + taglen=0 + rescount + OP_PUTFH + status
-	 *       + OP_READ + status + eof + datalen = 9
-	 */
-	replen = (RPC_REPHDRSIZE + auth->au_rslack + NFS4_dec_read_sz) << 2;
-	xdr_inline_pages(&req->rq_rcv_buf, replen,
+	xdr_inline_pages(&req->rq_rcv_buf, hdr.replen << 2,
 			 args->pages, args->pgbase, args->count);
 	req->rq_rcv_buf.flags |= XDRBUF_READ;
 	encode_nops(&hdr);
@@ -1763,11 +2110,12 @@ static int nfs4_xdr_enc_setattr(struct rpc_rqst *req, __be32 *p, struct nfs_seta
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.nops   = 0,
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->seq_args, &hdr);
 	encode_putfh(&xdr, args->fh, &hdr);
 	encode_setattr(&xdr, args, args->server, &hdr);
 	encode_getfattr(&xdr, args->bitmask, &hdr);
@@ -1783,20 +2131,19 @@ nfs4_xdr_enc_getacl(struct rpc_rqst *req, __be32 *p,
 		struct nfs_getaclargs *args)
 {
 	struct xdr_stream xdr;
-	struct rpc_auth *auth = req->rq_task->tk_msg.rpc_cred->cr_auth;
 	struct compound_hdr hdr = {
-		.nops   = 0,
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
 	};
-	int replen;
+	uint32_t replen;
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->seq_args, &hdr);
 	encode_putfh(&xdr, args->fh, &hdr);
+	replen = hdr.replen + nfs4_fattr_bitmap_maxsz + 1;
 	encode_getattr_two(&xdr, FATTR4_WORD0_ACL, 0, &hdr);
 
-	/* set up reply buffer: */
-	replen = (RPC_REPHDRSIZE + auth->au_rslack + NFS4_dec_getacl_sz) << 2;
-	xdr_inline_pages(&req->rq_rcv_buf, replen,
+	xdr_inline_pages(&req->rq_rcv_buf, replen << 2,
 		args->acl_pages, args->acl_pgbase, args->acl_len);
 	encode_nops(&hdr);
 	return 0;
@@ -1809,11 +2156,12 @@ static int nfs4_xdr_enc_write(struct rpc_rqst *req, __be32 *p, struct nfs_writea
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.nops = 0,
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->seq_args, &hdr);
 	encode_putfh(&xdr, args->fh, &hdr);
 	encode_write(&xdr, args, &hdr);
 	req->rq_snd_buf.flags |= XDRBUF_WRITE;
@@ -1829,11 +2177,12 @@ static int nfs4_xdr_enc_commit(struct rpc_rqst *req, __be32 *p, struct nfs_write
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.nops = 0,
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->seq_args, &hdr);
 	encode_putfh(&xdr, args->fh, &hdr);
 	encode_commit(&xdr, args, &hdr);
 	encode_getfattr(&xdr, args->bitmask, &hdr);
@@ -1848,11 +2197,12 @@ static int nfs4_xdr_enc_fsinfo(struct rpc_rqst *req, __be32 *p, struct nfs4_fsin
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.nops	= 0,
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->seq_args, &hdr);
 	encode_putfh(&xdr, args->fh, &hdr);
 	encode_fsinfo(&xdr, args->bitmask, &hdr);
 	encode_nops(&hdr);
@@ -1866,11 +2216,12 @@ static int nfs4_xdr_enc_pathconf(struct rpc_rqst *req, __be32 *p, const struct n
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.nops = 0,
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->seq_args, &hdr);
 	encode_putfh(&xdr, args->fh, &hdr);
 	encode_getattr_one(&xdr, args->bitmask[0] & nfs4_pathconf_bitmap[0],
 			   &hdr);
@@ -1885,11 +2236,12 @@ static int nfs4_xdr_enc_statfs(struct rpc_rqst *req, __be32 *p, const struct nfs
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.nops = 0,
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->seq_args, &hdr);
 	encode_putfh(&xdr, args->fh, &hdr);
 	encode_getattr_two(&xdr, args->bitmask[0] & nfs4_statfs_bitmap[0],
 			   args->bitmask[1] & nfs4_statfs_bitmap[1], &hdr);
@@ -1900,16 +2252,18 @@ static int nfs4_xdr_enc_statfs(struct rpc_rqst *req, __be32 *p, const struct nfs
 /*
  * GETATTR_BITMAP request
  */
-static int nfs4_xdr_enc_server_caps(struct rpc_rqst *req, __be32 *p, const struct nfs_fh *fhandle)
+static int nfs4_xdr_enc_server_caps(struct rpc_rqst *req, __be32 *p,
+				    struct nfs4_server_caps_arg *args)
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.nops = 0,
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
-	encode_putfh(&xdr, fhandle, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->seq_args, &hdr);
+	encode_putfh(&xdr, args->fhandle, &hdr);
 	encode_getattr_one(&xdr, FATTR4_WORD0_SUPPORTED_ATTRS|
 			   FATTR4_WORD0_LINK_SUPPORT|
 			   FATTR4_WORD0_SYMLINK_SUPPORT|
@@ -1929,7 +2283,7 @@ static int nfs4_xdr_enc_renew(struct rpc_rqst *req, __be32 *p, struct nfs_client
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
 	encode_renew(&xdr, clp, &hdr);
 	encode_nops(&hdr);
 	return 0;
@@ -1946,7 +2300,7 @@ static int nfs4_xdr_enc_setclientid(struct rpc_rqst *req, __be32 *p, struct nfs4
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
 	encode_setclientid(&xdr, sc, &hdr);
 	encode_nops(&hdr);
 	return 0;
@@ -1964,7 +2318,7 @@ static int nfs4_xdr_enc_setclientid_confirm(struct rpc_rqst *req, __be32 *p, str
 	const u32 lease_bitmap[2] = { FATTR4_WORD0_LEASE_TIME, 0 };
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
 	encode_setclientid_confirm(&xdr, clp, &hdr);
 	encode_putrootfh(&xdr, &hdr);
 	encode_fsinfo(&xdr, lease_bitmap, &hdr);
@@ -1979,11 +2333,12 @@ static int nfs4_xdr_enc_delegreturn(struct rpc_rqst *req, __be32 *p, const struc
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.nops = 0,
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->seq_args, &hdr);
 	encode_putfh(&xdr, args->fhandle, &hdr);
 	encode_delegreturn(&xdr, args->stateid, &hdr);
 	encode_getfattr(&xdr, args->bitmask, &hdr);
@@ -1998,28 +2353,119 @@ static int nfs4_xdr_enc_fs_locations(struct rpc_rqst *req, __be32 *p, struct nfs
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.nops = 0,
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
 	};
-	struct rpc_auth *auth = req->rq_task->tk_msg.rpc_cred->cr_auth;
-	int replen;
+	uint32_t replen;
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->seq_args, &hdr);
 	encode_putfh(&xdr, args->dir_fh, &hdr);
 	encode_lookup(&xdr, args->name, &hdr);
+	replen = hdr.replen;	/* get the attribute into args->page */
 	encode_fs_locations(&xdr, args->bitmask, &hdr);
 
-	/* set up reply
-	 *   toplevel_status + OP_PUTFH + status
-	 *   + OP_LOOKUP + status + OP_GETATTR + status = 7
-	 */
-	replen = (RPC_REPHDRSIZE + auth->au_rslack + 7) << 2;
-	xdr_inline_pages(&req->rq_rcv_buf, replen, &args->page,
+	xdr_inline_pages(&req->rq_rcv_buf, replen << 2, &args->page,
 			0, PAGE_SIZE);
 	encode_nops(&hdr);
 	return 0;
 }
 
+#if defined(CONFIG_NFS_V4_1)
+/*
+ * EXCHANGE_ID request
+ */
+static int nfs4_xdr_enc_exchange_id(struct rpc_rqst *req, uint32_t *p,
+				    struct nfs41_exchange_id_args *args)
+{
+	struct xdr_stream xdr;
+	struct compound_hdr hdr = {
+		.minorversion = args->client->cl_minorversion,
+	};
+
+	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_exchange_id(&xdr, args, &hdr);
+	encode_nops(&hdr);
+	return 0;
+}
+
+/*
+ * a CREATE_SESSION request
+ */
+static int nfs4_xdr_enc_create_session(struct rpc_rqst *req, uint32_t *p,
+				       struct nfs41_create_session_args *args)
+{
+	struct xdr_stream xdr;
+	struct compound_hdr hdr = {
+		.minorversion = args->client->cl_minorversion,
+	};
+
+	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_create_session(&xdr, args, &hdr);
+	encode_nops(&hdr);
+	return 0;
+}
+
+/*
+ * a DESTROY_SESSION request
+ */
+static int nfs4_xdr_enc_destroy_session(struct rpc_rqst *req, uint32_t *p,
+					struct nfs4_session *session)
+{
+	struct xdr_stream xdr;
+	struct compound_hdr hdr = {
+		.minorversion = session->clp->cl_minorversion,
+	};
+
+	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_destroy_session(&xdr, session, &hdr);
+	encode_nops(&hdr);
+	return 0;
+}
+
+/*
+ * a SEQUENCE request
+ */
+static int nfs4_xdr_enc_sequence(struct rpc_rqst *req, uint32_t *p,
+				 struct nfs4_sequence_args *args)
+{
+	struct xdr_stream xdr;
+	struct compound_hdr hdr = {
+		.minorversion = nfs4_xdr_minorversion(args),
+	};
+
+	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, args, &hdr);
+	encode_nops(&hdr);
+	return 0;
+}
+
+/*
+ * a GET_LEASE_TIME request
+ */
+static int nfs4_xdr_enc_get_lease_time(struct rpc_rqst *req, uint32_t *p,
+				       struct nfs4_get_lease_time_args *args)
+{
+	struct xdr_stream xdr;
+	struct compound_hdr hdr = {
+		.minorversion = nfs4_xdr_minorversion(&args->la_seq_args),
+	};
+	const u32 lease_bitmap[2] = { FATTR4_WORD0_LEASE_TIME, 0 };
+
+	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->la_seq_args, &hdr);
+	encode_putrootfh(&xdr, &hdr);
+	encode_fsinfo(&xdr, lease_bitmap, &hdr);
+	encode_nops(&hdr);
+	return 0;
+}
+#endif /* CONFIG_NFS_V4_1 */
+
 /*
  * START OF "GENERIC" DECODE ROUTINES.
  *   These may look a little ugly since they are imported from a "generic"
@@ -3657,7 +4103,7 @@ decode_savefh(struct xdr_stream *xdr)
 	return decode_op_hdr(xdr, OP_SAVEFH);
 }
 
-static int decode_setattr(struct xdr_stream *xdr, struct nfs_setattrres *res)
+static int decode_setattr(struct xdr_stream *xdr)
 {
 	__be32 *p;
 	uint32_t bmlen;
@@ -3735,6 +4181,169 @@ static int decode_delegreturn(struct xdr_stream *xdr)
 	return decode_op_hdr(xdr, OP_DELEGRETURN);
 }
 
+#if defined(CONFIG_NFS_V4_1)
+static int decode_exchange_id(struct xdr_stream *xdr,
+			      struct nfs41_exchange_id_res *res)
+{
+	__be32 *p;
+	uint32_t dummy;
+	int status;
+	struct nfs_client *clp = res->client;
+
+	status = decode_op_hdr(xdr, OP_EXCHANGE_ID);
+	if (status)
+		return status;
+
+	READ_BUF(8);
+	READ64(clp->cl_ex_clid);
+	READ_BUF(12);
+	READ32(clp->cl_seqid);
+	READ32(clp->cl_exchange_flags);
+
+	/* We ask for SP4_NONE */
+	READ32(dummy);
+	if (dummy != SP4_NONE)
+		return -EIO;
+
+	/* Throw away minor_id */
+	READ_BUF(8);
+
+	/* Throw away Major id */
+	READ_BUF(4);
+	READ32(dummy);
+	READ_BUF(dummy);
+
+	/* Throw away server_scope */
+	READ_BUF(4);
+	READ32(dummy);
+	READ_BUF(dummy);
+
+	/* Throw away Implementation id array */
+	READ_BUF(4);
+	READ32(dummy);
+	READ_BUF(dummy);
+
+	return 0;
+}
+
+static int decode_chan_attrs(struct xdr_stream *xdr,
+			     struct nfs4_channel_attrs *attrs)
+{
+	__be32 *p;
+	u32 nr_attrs;
+
+	READ_BUF(28);
+	READ32(attrs->headerpadsz);
+	READ32(attrs->max_rqst_sz);
+	READ32(attrs->max_resp_sz);
+	READ32(attrs->max_resp_sz_cached);
+	READ32(attrs->max_ops);
+	READ32(attrs->max_reqs);
+	READ32(nr_attrs);
+	if (unlikely(nr_attrs > 1)) {
+		printk(KERN_WARNING "%s: Invalid rdma channel attrs count %u\n",
+			__func__, nr_attrs);
+		return -EINVAL;
+	}
+	if (nr_attrs == 1)
+		READ_BUF(4); /* skip rdma_attrs */
+	return 0;
+}
+
+static int decode_create_session(struct xdr_stream *xdr,
+				 struct nfs41_create_session_res *res)
+{
+	__be32 *p;
+	int status;
+	struct nfs_client *clp = res->client;
+	struct nfs4_session *session = clp->cl_session;
+
+	status = decode_op_hdr(xdr, OP_CREATE_SESSION);
+
+	if (status)
+		return status;
+
+	/* sessionid */
+	READ_BUF(NFS4_MAX_SESSIONID_LEN);
+	COPYMEM(&session->sess_id, NFS4_MAX_SESSIONID_LEN);
+
+	/* seqid, flags */
+	READ_BUF(8);
+	READ32(clp->cl_seqid);
+	READ32(session->flags);
+
+	/* Channel attributes */
+	status = decode_chan_attrs(xdr, &session->fc_attrs);
+	if (!status)
+		status = decode_chan_attrs(xdr, &session->bc_attrs);
+	return status;
+}
+
+static int decode_destroy_session(struct xdr_stream *xdr, void *dummy)
+{
+	return decode_op_hdr(xdr, OP_DESTROY_SESSION);
+}
+#endif /* CONFIG_NFS_V4_1 */
+
+static int decode_sequence(struct xdr_stream *xdr,
+			   struct nfs4_sequence_res *res,
+			   struct rpc_rqst *rqstp)
+{
+#if defined(CONFIG_NFS_V4_1)
+	struct nfs4_slot *slot;
+	struct nfs4_sessionid id;
+	u32 dummy;
+	int status;
+	__be32 *p;
+
+	if (!res->sr_session)
+		return 0;
+
+	status = decode_op_hdr(xdr, OP_SEQUENCE);
+	if (status)
+		goto out_err;
+
+	/*
+	 * If the server returns different values for sessionID, slotID or
+	 * sequence number, the server is looney tunes.
+	 */
+	status = -ESERVERFAULT;
+
+	slot = &res->sr_session->fc_slot_table.slots[res->sr_slotid];
+	READ_BUF(NFS4_MAX_SESSIONID_LEN + 20);
+	COPYMEM(id.data, NFS4_MAX_SESSIONID_LEN);
+	if (memcmp(id.data, res->sr_session->sess_id.data,
+		   NFS4_MAX_SESSIONID_LEN)) {
+		dprintk("%s Invalid session id\n", __func__);
+		goto out_err;
+	}
+	/* seqid */
+	READ32(dummy);
+	if (dummy != slot->seq_nr) {
+		dprintk("%s Invalid sequence number\n", __func__);
+		goto out_err;
+	}
+	/* slot id */
+	READ32(dummy);
+	if (dummy != res->sr_slotid) {
+		dprintk("%s Invalid slot id\n", __func__);
+		goto out_err;
+	}
+	/* highest slot id - currently not processed */
+	READ32(dummy);
+	/* target highest slot id - currently not processed */
+	READ32(dummy);
+	/* result flags - currently not processed */
+	READ32(dummy);
+	status = 0;
+out_err:
+	res->sr_status = status;
+	return status;
+#else  /* CONFIG_NFS_V4_1 */
+	return 0;
+#endif /* CONFIG_NFS_V4_1 */
+}
+
 /*
  * END OF "GENERIC" DECODE ROUTINES.
  */
@@ -3752,6 +4361,9 @@ static int nfs4_xdr_dec_open_downgrade(struct rpc_rqst *rqstp, __be32 *p, struct
 	status = decode_compound_hdr(&xdr, &hdr);
 	if (status)
 		goto out;
+	status = decode_sequence(&xdr, &res->seq_res, rqstp);
+	if (status)
+		goto out;
 	status = decode_putfh(&xdr);
 	if (status)
 		goto out;
@@ -3773,7 +4385,11 @@ static int nfs4_xdr_dec_access(struct rpc_rqst *rqstp, __be32 *p, struct nfs4_ac
 	int status;
 
 	xdr_init_decode(&xdr, &rqstp->rq_rcv_buf, p);
-	if ((status = decode_compound_hdr(&xdr, &hdr)) != 0)
+	status = decode_compound_hdr(&xdr, &hdr);
+	if (status)
+		goto out;
+	status = decode_sequence(&xdr, &res->seq_res, rqstp);
+	if (status)
 		goto out;
 	status = decode_putfh(&xdr);
 	if (status != 0)
@@ -3796,7 +4412,11 @@ static int nfs4_xdr_dec_lookup(struct rpc_rqst *rqstp, __be32 *p, struct nfs4_lo
 	int status;
 
 	xdr_init_decode(&xdr, &rqstp->rq_rcv_buf, p);
-	if ((status = decode_compound_hdr(&xdr, &hdr)) != 0)
+	status = decode_compound_hdr(&xdr, &hdr);
+	if (status)
+		goto out;
+	status = decode_sequence(&xdr, &res->seq_res, rqstp);
+	if (status)
 		goto out;
 	if ((status = decode_putfh(&xdr)) != 0)
 		goto out;
@@ -3819,7 +4439,11 @@ static int nfs4_xdr_dec_lookup_root(struct rpc_rqst *rqstp, __be32 *p, struct nf
 	int status;
 
 	xdr_init_decode(&xdr, &rqstp->rq_rcv_buf, p);
-	if ((status = decode_compound_hdr(&xdr, &hdr)) != 0)
+	status = decode_compound_hdr(&xdr, &hdr);
+	if (status)
+		goto out;
+	status = decode_sequence(&xdr, &res->seq_res, rqstp);
+	if (status)
 		goto out;
 	if ((status = decode_putrootfh(&xdr)) != 0)
 		goto out;
@@ -3839,7 +4463,11 @@ static int nfs4_xdr_dec_remove(struct rpc_rqst *rqstp, __be32 *p, struct nfs_rem
 	int status;
 
 	xdr_init_decode(&xdr, &rqstp->rq_rcv_buf, p);
-	if ((status = decode_compound_hdr(&xdr, &hdr)) != 0)
+	status = decode_compound_hdr(&xdr, &hdr);
+	if (status)
+		goto out;
+	status = decode_sequence(&xdr, &res->seq_res, rqstp);
+	if (status)
 		goto out;
 	if ((status = decode_putfh(&xdr)) != 0)
 		goto out;
@@ -3860,7 +4488,11 @@ static int nfs4_xdr_dec_rename(struct rpc_rqst *rqstp, __be32 *p, struct nfs4_re
 	int status;
 
 	xdr_init_decode(&xdr, &rqstp->rq_rcv_buf, p);
-	if ((status = decode_compound_hdr(&xdr, &hdr)) != 0)
+	status = decode_compound_hdr(&xdr, &hdr);
+	if (status)
+		goto out;
+	status = decode_sequence(&xdr, &res->seq_res, rqstp);
+	if (status)
 		goto out;
 	if ((status = decode_putfh(&xdr)) != 0)
 		goto out;
@@ -3890,7 +4522,11 @@ static int nfs4_xdr_dec_link(struct rpc_rqst *rqstp, __be32 *p, struct nfs4_link
 	int status;
 
 	xdr_init_decode(&xdr, &rqstp->rq_rcv_buf, p);
-	if ((status = decode_compound_hdr(&xdr, &hdr)) != 0)
+	status = decode_compound_hdr(&xdr, &hdr);
+	if (status)
+		goto out;
+	status = decode_sequence(&xdr, &res->seq_res, rqstp);
+	if (status)
 		goto out;
 	if ((status = decode_putfh(&xdr)) != 0)
 		goto out;
@@ -3923,7 +4559,11 @@ static int nfs4_xdr_dec_create(struct rpc_rqst *rqstp, __be32 *p, struct nfs4_cr
 	int status;
 
 	xdr_init_decode(&xdr, &rqstp->rq_rcv_buf, p);
-	if ((status = decode_compound_hdr(&xdr, &hdr)) != 0)
+	status = decode_compound_hdr(&xdr, &hdr);
+	if (status)
+		goto out;
+	status = decode_sequence(&xdr, &res->seq_res, rqstp);
+	if (status)
 		goto out;
 	if ((status = decode_putfh(&xdr)) != 0)
 		goto out;
@@ -3963,6 +4603,9 @@ static int nfs4_xdr_dec_getattr(struct rpc_rqst *rqstp, __be32 *p, struct nfs4_g
 	status = decode_compound_hdr(&xdr, &hdr);
 	if (status)
 		goto out;
+	status = decode_sequence(&xdr, &res->seq_res, rqstp);
+	if (status)
+		goto out;
 	status = decode_putfh(&xdr);
 	if (status)
 		goto out;
@@ -3979,12 +4622,13 @@ nfs4_xdr_enc_setacl(struct rpc_rqst *req, __be32 *p, struct nfs_setaclargs *args
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.nops   = 0,
+		.minorversion = nfs4_xdr_minorversion(&args->seq_args),
 	};
 	int status;
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
-	encode_compound_hdr(&xdr, &hdr);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_sequence(&xdr, &args->seq_args, &hdr);
 	encode_putfh(&xdr, args->fh, &hdr);
 	status = encode_setacl(&xdr, args, &hdr);
 	encode_nops(&hdr);
@@ -3995,7 +4639,8 @@ nfs4_xdr_enc_setacl(struct rpc_rqst *req, __be32 *p, struct nfs_setaclargs *args
  * Decode SETACL response
  */
 static int
-nfs4_xdr_dec_setacl(struct rpc_rqst *rqstp, __be32 *p, void *res)
+nfs4_xdr_dec_setacl(struct rpc_rqst *rqstp, __be32 *p,
+		    struct nfs_setaclres *res)
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr;
@@ -4005,10 +4650,13 @@ nfs4_xdr_dec_setacl(struct rpc_rqst *rqstp, __be32 *p, void *res)
 	status = decode_compound_hdr(&xdr, &hdr);
 	if (status)
 		goto out;
+	status = decode_sequence(&xdr, &res->seq_res, rqstp);
+	if (status)
+		goto out;
 	status = decode_putfh(&xdr);
 	if (status)
 		goto out;
-	status = decode_setattr(&xdr, res);
+	status = decode_setattr(&xdr);
 out:
 	return status;
 }
@@ -4017,7 +4665,8 @@ out:
  * Decode GETACL response
  */
 static int
-nfs4_xdr_dec_getacl(struct rpc_rqst *rqstp, __be32 *p, size_t *acl_len)
+nfs4_xdr_dec_getacl(struct rpc_rqst *rqstp, __be32 *p,
+		    struct nfs_getaclres *res)
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr;
@@ -4027,10 +4676,13 @@ nfs4_xdr_dec_getacl(struct rpc_rqst *rqstp, __be32 *p, size_t *acl_len)
 	status = decode_compound_hdr(&xdr, &hdr);
 	if (status)
 		goto out;
+	status = decode_sequence(&xdr, &res->seq_res, rqstp);
+	if (status)
+		goto out;
 	status = decode_putfh(&xdr);
 	if (status)
 		goto out;
-	status = decode_getacl(&xdr, rqstp, acl_len);
+	status = decode_getacl(&xdr, rqstp, &res->acl_len);
 
 out:
 	return status;
@@ -4049,6 +4701,9 @@ static int nfs4_xdr_dec_close(struct rpc_rqst *rqstp, __be32 *p, struct nfs_clos
 	status = decode_compound_hdr(&xdr, &hdr);
 	if (status)
 		goto out;
+	status = decode_sequence(&xdr, &res->seq_res, rqstp);
+	if (status)
+		goto out;
 	status = decode_putfh(&xdr);
 	if (status)
 		goto out;
@@ -4079,6 +4734,9 @@ static int nfs4_xdr_dec_open(struct rpc_rqst *rqstp, __be32 *p, struct nfs_openr
 	status = decode_compound_hdr(&xdr, &hdr);
 	if (status)
 		goto out;
+	status = decode_sequence(&xdr, &res->seq_res, rqstp);
+	if (status)
+		goto out;
 	status = decode_putfh(&xdr);
 	if (status)
 		goto out;
@@ -4133,6 +4791,9 @@ static int nfs4_xdr_dec_open_noattr(struct rpc_rqst *rqstp, __be32 *p, struct nf
 	status = decode_compound_hdr(&xdr, &hdr);
 	if (status)
 		goto out;
+	status = decode_sequence(&xdr, &res->seq_res, rqstp);
+	if (status)
+		goto out;
 	status = decode_putfh(&xdr);
 	if (status)
 		goto out;
@@ -4157,10 +4818,13 @@ static int nfs4_xdr_dec_setattr(struct rpc_rqst *rqstp, __be32 *p, struct nfs_se
 	status = decode_compound_hdr(&xdr, &hdr);
 	if (status)
 		goto out;
+	status = decode_sequence(&xdr, &res->seq_res, rqstp);
+	if (status)
+		goto out;
 	status = decode_putfh(&xdr);
 	if (status)
 		goto out;
-	status = decode_setattr(&xdr, res);
+	status = decode_setattr(&xdr);
 	if (status)
 		goto out;
 	decode_getfattr(&xdr, res->fattr, res->server);
@@ -4181,6 +4845,9 @@ static int nfs4_xdr_dec_lock(struct rpc_rqst *rqstp, __be32 *p, struct nfs_lock_
 	status = decode_compound_hdr(&xdr, &hdr);
 	if (status)
 		goto out;
+	status = decode_sequence(&xdr, &res->seq_res, rqstp);
+	if (status)
+		goto out;
 	status = decode_putfh(&xdr);
 	if (status)
 		goto out;
@@ -4202,6 +4869,9 @@ static int nfs4_xdr_dec_lockt(struct rpc_rqst *rqstp, __be32 *p, struct nfs_lock
 	status = decode_compound_hdr(&xdr, &hdr);
 	if (status)
 		goto out;
+	status = decode_sequence(&xdr, &res->seq_res, rqstp);
+	if (status)
+		goto out;
 	status = decode_putfh(&xdr);
 	if (status)
 		goto out;
@@ -4223,6 +4893,9 @@ static int nfs4_xdr_dec_locku(struct rpc_rqst *rqstp, __be32 *p, struct nfs_lock
 	status = decode_compound_hdr(&xdr, &hdr);
 	if (status)
 		goto out;
+	status = decode_sequence(&xdr, &res->seq_res, rqstp);
+	if (status)
+		goto out;
 	status = decode_putfh(&xdr);
 	if (status)
 		goto out;
@@ -4234,7 +4907,8 @@ out:
 /*
  * Decode READLINK response
  */
-static int nfs4_xdr_dec_readlink(struct rpc_rqst *rqstp, __be32 *p, void *res)
+static int nfs4_xdr_dec_readlink(struct rpc_rqst *rqstp, __be32 *p,
+				 struct nfs4_readlink_res *res)
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr;
@@ -4244,6 +4918,9 @@ static int nfs4_xdr_dec_readlink(struct rpc_rqst *rqstp, __be32 *p, void *res)
 	status = decode_compound_hdr(&xdr, &hdr);
 	if (status)
 		goto out;
+	status = decode_sequence(&xdr, &res->seq_res, rqstp);
+	if (status)
+		goto out;
 	status = decode_putfh(&xdr);
 	if (status)
 		goto out;
@@ -4265,6 +4942,9 @@ static int nfs4_xdr_dec_readdir(struct rpc_rqst *rqstp, __be32 *p, struct nfs4_r
 	status = decode_compound_hdr(&xdr, &hdr);
 	if (status)
 		goto out;
+	status = decode_sequence(&xdr, &res->seq_res, rqstp);
+	if (status)
+		goto out;
 	status = decode_putfh(&xdr);
 	if (status)
 		goto out;
@@ -4286,6 +4966,9 @@ static int nfs4_xdr_dec_read(struct rpc_rqst *rqstp, __be32 *p, struct nfs_readr
 	status = decode_compound_hdr(&xdr, &hdr);
 	if (status)
 		goto out;
+	status = decode_sequence(&xdr, &res->seq_res, rqstp);
+	if (status)
+		goto out;
 	status = decode_putfh(&xdr);
 	if (status)
 		goto out;
@@ -4309,6 +4992,9 @@ static int nfs4_xdr_dec_write(struct rpc_rqst *rqstp, __be32 *p, struct nfs_writ
 	status = decode_compound_hdr(&xdr, &hdr);
 	if (status)
 		goto out;
+	status = decode_sequence(&xdr, &res->seq_res, rqstp);
+	if (status)
+		goto out;
 	status = decode_putfh(&xdr);
 	if (status)
 		goto out;
@@ -4335,6 +5021,9 @@ static int nfs4_xdr_dec_commit(struct rpc_rqst *rqstp, __be32 *p, struct nfs_wri
 	status = decode_compound_hdr(&xdr, &hdr);
 	if (status)
 		goto out;
+	status = decode_sequence(&xdr, &res->seq_res, rqstp);
+	if (status)
+		goto out;
 	status = decode_putfh(&xdr);
 	if (status)
 		goto out;
@@ -4349,7 +5038,8 @@ out:
 /*
  * FSINFO request
  */
-static int nfs4_xdr_dec_fsinfo(struct rpc_rqst *req, __be32 *p, struct nfs_fsinfo *fsinfo)
+static int nfs4_xdr_dec_fsinfo(struct rpc_rqst *req, __be32 *p,
+			       struct nfs4_fsinfo_res *res)
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr;
@@ -4358,16 +5048,19 @@ static int nfs4_xdr_dec_fsinfo(struct rpc_rqst *req, __be32 *p, struct nfs_fsinf
 	xdr_init_decode(&xdr, &req->rq_rcv_buf, p);
 	status = decode_compound_hdr(&xdr, &hdr);
 	if (!status)
+		status = decode_sequence(&xdr, &res->seq_res, req);
+	if (!status)
 		status = decode_putfh(&xdr);
 	if (!status)
-		status = decode_fsinfo(&xdr, fsinfo);
+		status = decode_fsinfo(&xdr, res->fsinfo);
 	return status;
 }
 
 /*
  * PATHCONF request
  */
-static int nfs4_xdr_dec_pathconf(struct rpc_rqst *req, __be32 *p, struct nfs_pathconf *pathconf)
+static int nfs4_xdr_dec_pathconf(struct rpc_rqst *req, __be32 *p,
+				 struct nfs4_pathconf_res *res)
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr;
@@ -4376,16 +5069,19 @@ static int nfs4_xdr_dec_pathconf(struct rpc_rqst *req, __be32 *p, struct nfs_pat
 	xdr_init_decode(&xdr, &req->rq_rcv_buf, p);
 	status = decode_compound_hdr(&xdr, &hdr);
 	if (!status)
+		status = decode_sequence(&xdr, &res->seq_res, req);
+	if (!status)
 		status = decode_putfh(&xdr);
 	if (!status)
-		status = decode_pathconf(&xdr, pathconf);
+		status = decode_pathconf(&xdr, res->pathconf);
 	return status;
 }
 
 /*
  * STATFS request
  */
-static int nfs4_xdr_dec_statfs(struct rpc_rqst *req, __be32 *p, struct nfs_fsstat *fsstat)
+static int nfs4_xdr_dec_statfs(struct rpc_rqst *req, __be32 *p,
+			       struct nfs4_statfs_res *res)
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr;
@@ -4394,9 +5090,11 @@ static int nfs4_xdr_dec_statfs(struct rpc_rqst *req, __be32 *p, struct nfs_fssta
 	xdr_init_decode(&xdr, &req->rq_rcv_buf, p);
 	status = decode_compound_hdr(&xdr, &hdr);
 	if (!status)
+		status = decode_sequence(&xdr, &res->seq_res, req);
+	if (!status)
 		status = decode_putfh(&xdr);
 	if (!status)
-		status = decode_statfs(&xdr, fsstat);
+		status = decode_statfs(&xdr, res->fsstat);
 	return status;
 }
 
@@ -4410,7 +5108,11 @@ static int nfs4_xdr_dec_server_caps(struct rpc_rqst *req, __be32 *p, struct nfs4
 	int status;
 
 	xdr_init_decode(&xdr, &req->rq_rcv_buf, p);
-	if ((status = decode_compound_hdr(&xdr, &hdr)) != 0)
+	status = decode_compound_hdr(&xdr, &hdr);
+	if (status)
+		goto out;
+	status = decode_sequence(&xdr, &res->seq_res, req);
+	if (status)
 		goto out;
 	if ((status = decode_putfh(&xdr)) != 0)
 		goto out;
@@ -4483,7 +5185,10 @@ static int nfs4_xdr_dec_delegreturn(struct rpc_rqst *rqstp, __be32 *p, struct nf
 
 	xdr_init_decode(&xdr, &rqstp->rq_rcv_buf, p);
 	status = decode_compound_hdr(&xdr, &hdr);
-	if (status != 0)
+	if (status)
+		goto out;
+	status = decode_sequence(&xdr, &res->seq_res, rqstp);
+	if (status)
 		goto out;
 	status = decode_putfh(&xdr);
 	if (status != 0)
@@ -4497,7 +5202,8 @@ out:
 /*
  * FS_LOCATIONS request
  */
-static int nfs4_xdr_dec_fs_locations(struct rpc_rqst *req, __be32 *p, struct nfs4_fs_locations *res)
+static int nfs4_xdr_dec_fs_locations(struct rpc_rqst *req, __be32 *p,
+				     struct nfs4_fs_locations_res *res)
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr;
@@ -4505,18 +5211,113 @@ static int nfs4_xdr_dec_fs_locations(struct rpc_rqst *req, __be32 *p, struct nfs
 
 	xdr_init_decode(&xdr, &req->rq_rcv_buf, p);
 	status = decode_compound_hdr(&xdr, &hdr);
-	if (status != 0)
+	if (status)
+		goto out;
+	status = decode_sequence(&xdr, &res->seq_res, req);
+	if (status)
 		goto out;
 	if ((status = decode_putfh(&xdr)) != 0)
 		goto out;
 	if ((status = decode_lookup(&xdr)) != 0)
 		goto out;
 	xdr_enter_page(&xdr, PAGE_SIZE);
-	status = decode_getfattr(&xdr, &res->fattr, res->server);
+	status = decode_getfattr(&xdr, &res->fs_locations->fattr,
+				 res->fs_locations->server);
 out:
 	return status;
 }
 
+#if defined(CONFIG_NFS_V4_1)
+/*
+ * EXCHANGE_ID request
+ */
+static int nfs4_xdr_dec_exchange_id(struct rpc_rqst *rqstp, uint32_t *p,
+				    void *res)
+{
+	struct xdr_stream xdr;
+	struct compound_hdr hdr;
+	int status;
+
+	xdr_init_decode(&xdr, &rqstp->rq_rcv_buf, p);
+	status = decode_compound_hdr(&xdr, &hdr);
+	if (!status)
+		status = decode_exchange_id(&xdr, res);
+	return status;
+}
+
+/*
+ * a CREATE_SESSION request
+ */
+static int nfs4_xdr_dec_create_session(struct rpc_rqst *rqstp, uint32_t *p,
+				       struct nfs41_create_session_res *res)
+{
+	struct xdr_stream xdr;
+	struct compound_hdr hdr;
+	int status;
+
+	xdr_init_decode(&xdr, &rqstp->rq_rcv_buf, p);
+	status = decode_compound_hdr(&xdr, &hdr);
+	if (!status)
+		status = decode_create_session(&xdr, res);
+	return status;
+}
+
+/*
+ * a DESTROY_SESSION request
+ */
+static int nfs4_xdr_dec_destroy_session(struct rpc_rqst *rqstp, uint32_t *p,
+					void *dummy)
+{
+	struct xdr_stream xdr;
+	struct compound_hdr hdr;
+	int status;
+
+	xdr_init_decode(&xdr, &rqstp->rq_rcv_buf, p);
+	status = decode_compound_hdr(&xdr, &hdr);
+	if (!status)
+		status = decode_destroy_session(&xdr, dummy);
+	return status;
+}
+
+/*
+ * a SEQUENCE request
+ */
+static int nfs4_xdr_dec_sequence(struct rpc_rqst *rqstp, uint32_t *p,
+				 struct nfs4_sequence_res *res)
+{
+	struct xdr_stream xdr;
+	struct compound_hdr hdr;
+	int status;
+
+	xdr_init_decode(&xdr, &rqstp->rq_rcv_buf, p);
+	status = decode_compound_hdr(&xdr, &hdr);
+	if (!status)
+		status = decode_sequence(&xdr, res, rqstp);
+	return status;
+}
+
+/*
+ * a GET_LEASE_TIME request
+ */
+static int nfs4_xdr_dec_get_lease_time(struct rpc_rqst *rqstp, uint32_t *p,
+				       struct nfs4_get_lease_time_res *res)
+{
+	struct xdr_stream xdr;
+	struct compound_hdr hdr;
+	int status;
+
+	xdr_init_decode(&xdr, &rqstp->rq_rcv_buf, p);
+	status = decode_compound_hdr(&xdr, &hdr);
+	if (!status)
+		status = decode_sequence(&xdr, &res->lr_seq_res, rqstp);
+	if (!status)
+		status = decode_putrootfh(&xdr);
+	if (!status)
+		status = decode_fsinfo(&xdr, res->lr_fsinfo);
+	return status;
+}
+#endif /* CONFIG_NFS_V4_1 */
+
 __be32 *nfs4_decode_dirent(__be32 *p, struct nfs_entry *entry, int plus)
 {
 	uint32_t bitmap[2] = {0};
@@ -4686,6 +5487,13 @@ struct rpc_procinfo	nfs4_procedures[] = {
   PROC(GETACL,		enc_getacl,	dec_getacl),
   PROC(SETACL,		enc_setacl,	dec_setacl),
   PROC(FS_LOCATIONS,	enc_fs_locations, dec_fs_locations),
+#if defined(CONFIG_NFS_V4_1)
+  PROC(EXCHANGE_ID,	enc_exchange_id,	dec_exchange_id),
+  PROC(CREATE_SESSION,	enc_create_session,	dec_create_session),
+  PROC(DESTROY_SESSION,	enc_destroy_session,	dec_destroy_session),
+  PROC(SEQUENCE,	enc_sequence,	dec_sequence),
+  PROC(GET_LEASE_TIME,	enc_get_lease_time,	dec_get_lease_time),
+#endif /* CONFIG_NFS_V4_1 */
 };
 
 struct rpc_version		nfs_version4 = {
diff --git a/fs/nfs/nfsroot.c b/fs/nfs/nfsroot.c
index e3ed5908820..8c55b27c0de 100644
--- a/fs/nfs/nfsroot.c
+++ b/fs/nfs/nfsroot.c
@@ -92,6 +92,9 @@
 #undef NFSROOT_DEBUG
 #define NFSDBG_FACILITY NFSDBG_ROOT
 
+/* Default port to use if server is not running a portmapper */
+#define NFS_MNT_PORT	627
+
 /* Default path we try to mount. "%s" gets replaced by our IP address */
 #define NFS_ROOT		"/tftpboot/%s"
 
@@ -487,6 +490,7 @@ static int __init root_nfs_get_handle(void)
 {
 	struct nfs_fh fh;
 	struct sockaddr_in sin;
+	unsigned int auth_flav_len = 0;
 	struct nfs_mount_request request = {
 		.sap		= (struct sockaddr *)&sin,
 		.salen		= sizeof(sin),
@@ -496,6 +500,7 @@ static int __init root_nfs_get_handle(void)
 		.protocol	= (nfs_data.flags & NFS_MOUNT_TCP) ?
 					XPRT_TRANSPORT_TCP : XPRT_TRANSPORT_UDP,
 		.fh		= &fh,
+		.auth_flav_len	= &auth_flav_len,
 	};
 	int status;
 
diff --git a/fs/nfs/read.c b/fs/nfs/read.c
index 4ace3c50a8e..96c4ebfa46f 100644
--- a/fs/nfs/read.c
+++ b/fs/nfs/read.c
@@ -22,6 +22,7 @@
 
 #include <asm/system.h>
 
+#include "nfs4_fs.h"
 #include "internal.h"
 #include "iostat.h"
 #include "fscache.h"
@@ -46,6 +47,7 @@ struct nfs_read_data *nfs_readdata_alloc(unsigned int pagecount)
 		memset(p, 0, sizeof(*p));
 		INIT_LIST_HEAD(&p->pages);
 		p->npages = pagecount;
+		p->res.seq_res.sr_slotid = NFS4_MAX_SLOT_TABLE;
 		if (pagecount <= ARRAY_SIZE(p->page_array))
 			p->pagevec = p->page_array;
 		else {
@@ -357,19 +359,25 @@ static void nfs_readpage_retry(struct rpc_task *task, struct nfs_read_data *data
 	struct nfs_readres *resp = &data->res;
 
 	if (resp->eof || resp->count == argp->count)
-		return;
+		goto out;
 
 	/* This is a short read! */
 	nfs_inc_stats(data->inode, NFSIOS_SHORTREAD);
 	/* Has the server at least made some progress? */
 	if (resp->count == 0)
-		return;
+		goto out;
 
 	/* Yes, so retry the read at the end of the data */
 	argp->offset += resp->count;
 	argp->pgbase += resp->count;
 	argp->count -= resp->count;
-	rpc_restart_call(task);
+	nfs4_restart_rpc(task, NFS_SERVER(data->inode)->nfs_client);
+	return;
+out:
+	nfs4_sequence_free_slot(NFS_SERVER(data->inode)->nfs_client,
+				&data->res.seq_res);
+	return;
+
 }
 
 /*
@@ -406,7 +414,23 @@ static void nfs_readpage_release_partial(void *calldata)
 	nfs_readdata_release(calldata);
 }
 
+#if defined(CONFIG_NFS_V4_1)
+void nfs_read_prepare(struct rpc_task *task, void *calldata)
+{
+	struct nfs_read_data *data = calldata;
+
+	if (nfs4_setup_sequence(NFS_SERVER(data->inode)->nfs_client,
+				&data->args.seq_args, &data->res.seq_res,
+				0, task))
+		return;
+	rpc_call_start(task);
+}
+#endif /* CONFIG_NFS_V4_1 */
+
 static const struct rpc_call_ops nfs_read_partial_ops = {
+#if defined(CONFIG_NFS_V4_1)
+	.rpc_call_prepare = nfs_read_prepare,
+#endif /* CONFIG_NFS_V4_1 */
 	.rpc_call_done = nfs_readpage_result_partial,
 	.rpc_release = nfs_readpage_release_partial,
 };
@@ -470,6 +494,9 @@ static void nfs_readpage_release_full(void *calldata)
 }
 
 static const struct rpc_call_ops nfs_read_full_ops = {
+#if defined(CONFIG_NFS_V4_1)
+	.rpc_call_prepare = nfs_read_prepare,
+#endif /* CONFIG_NFS_V4_1 */
 	.rpc_call_done = nfs_readpage_result_full,
 	.rpc_release = nfs_readpage_release_full,
 };
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 26127b69a27..0b4cbdc60ab 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -42,6 +42,8 @@
 #include <linux/smp_lock.h>
 #include <linux/seq_file.h>
 #include <linux/mount.h>
+#include <linux/mnt_namespace.h>
+#include <linux/namei.h>
 #include <linux/nfs_idmap.h>
 #include <linux/vfs.h>
 #include <linux/inet.h>
@@ -90,6 +92,7 @@ enum {
 	Opt_mountport,
 	Opt_mountvers,
 	Opt_nfsvers,
+	Opt_minorversion,
 
 	/* Mount options that take string arguments */
 	Opt_sec, Opt_proto, Opt_mountproto, Opt_mounthost,
@@ -139,22 +142,23 @@ static const match_table_t nfs_mount_option_tokens = {
 	{ Opt_fscache_uniq, "fsc=%s" },
 	{ Opt_nofscache, "nofsc" },
 
-	{ Opt_port, "port=%u" },
-	{ Opt_rsize, "rsize=%u" },
-	{ Opt_wsize, "wsize=%u" },
-	{ Opt_bsize, "bsize=%u" },
-	{ Opt_timeo, "timeo=%u" },
-	{ Opt_retrans, "retrans=%u" },
-	{ Opt_acregmin, "acregmin=%u" },
-	{ Opt_acregmax, "acregmax=%u" },
-	{ Opt_acdirmin, "acdirmin=%u" },
-	{ Opt_acdirmax, "acdirmax=%u" },
-	{ Opt_actimeo, "actimeo=%u" },
-	{ Opt_namelen, "namlen=%u" },
-	{ Opt_mountport, "mountport=%u" },
-	{ Opt_mountvers, "mountvers=%u" },
-	{ Opt_nfsvers, "nfsvers=%u" },
-	{ Opt_nfsvers, "vers=%u" },
+	{ Opt_port, "port=%s" },
+	{ Opt_rsize, "rsize=%s" },
+	{ Opt_wsize, "wsize=%s" },
+	{ Opt_bsize, "bsize=%s" },
+	{ Opt_timeo, "timeo=%s" },
+	{ Opt_retrans, "retrans=%s" },
+	{ Opt_acregmin, "acregmin=%s" },
+	{ Opt_acregmax, "acregmax=%s" },
+	{ Opt_acdirmin, "acdirmin=%s" },
+	{ Opt_acdirmax, "acdirmax=%s" },
+	{ Opt_actimeo, "actimeo=%s" },
+	{ Opt_namelen, "namlen=%s" },
+	{ Opt_mountport, "mountport=%s" },
+	{ Opt_mountvers, "mountvers=%s" },
+	{ Opt_nfsvers, "nfsvers=%s" },
+	{ Opt_nfsvers, "vers=%s" },
+	{ Opt_minorversion, "minorversion=%u" },
 
 	{ Opt_sec, "sec=%s" },
 	{ Opt_proto, "proto=%s" },
@@ -270,10 +274,14 @@ static const struct super_operations nfs_sops = {
 #ifdef CONFIG_NFS_V4
 static int nfs4_get_sb(struct file_system_type *fs_type,
 	int flags, const char *dev_name, void *raw_data, struct vfsmount *mnt);
+static int nfs4_remote_get_sb(struct file_system_type *fs_type,
+	int flags, const char *dev_name, void *raw_data, struct vfsmount *mnt);
 static int nfs4_xdev_get_sb(struct file_system_type *fs_type,
 	int flags, const char *dev_name, void *raw_data, struct vfsmount *mnt);
 static int nfs4_referral_get_sb(struct file_system_type *fs_type,
 	int flags, const char *dev_name, void *raw_data, struct vfsmount *mnt);
+static int nfs4_remote_referral_get_sb(struct file_system_type *fs_type,
+	int flags, const char *dev_name, void *raw_data, struct vfsmount *mnt);
 static void nfs4_kill_super(struct super_block *sb);
 
 static struct file_system_type nfs4_fs_type = {
@@ -284,6 +292,14 @@ static struct file_system_type nfs4_fs_type = {
 	.fs_flags	= FS_RENAME_DOES_D_MOVE|FS_REVAL_DOT|FS_BINARY_MOUNTDATA,
 };
 
+static struct file_system_type nfs4_remote_fs_type = {
+	.owner		= THIS_MODULE,
+	.name		= "nfs4",
+	.get_sb		= nfs4_remote_get_sb,
+	.kill_sb	= nfs4_kill_super,
+	.fs_flags	= FS_RENAME_DOES_D_MOVE|FS_REVAL_DOT|FS_BINARY_MOUNTDATA,
+};
+
 struct file_system_type nfs4_xdev_fs_type = {
 	.owner		= THIS_MODULE,
 	.name		= "nfs4",
@@ -292,6 +308,14 @@ struct file_system_type nfs4_xdev_fs_type = {
 	.fs_flags	= FS_RENAME_DOES_D_MOVE|FS_REVAL_DOT|FS_BINARY_MOUNTDATA,
 };
 
+static struct file_system_type nfs4_remote_referral_fs_type = {
+	.owner		= THIS_MODULE,
+	.name		= "nfs4",
+	.get_sb		= nfs4_remote_referral_get_sb,
+	.kill_sb	= nfs4_kill_super,
+	.fs_flags	= FS_RENAME_DOES_D_MOVE|FS_REVAL_DOT|FS_BINARY_MOUNTDATA,
+};
+
 struct file_system_type nfs4_referral_fs_type = {
 	.owner		= THIS_MODULE,
 	.name		= "nfs4",
@@ -514,7 +538,6 @@ static void nfs_show_mount_options(struct seq_file *m, struct nfs_server *nfss,
 		const char *nostr;
 	} nfs_info[] = {
 		{ NFS_MOUNT_SOFT, ",soft", ",hard" },
-		{ NFS_MOUNT_INTR, ",intr", ",nointr" },
 		{ NFS_MOUNT_POSIX, ",posix", "" },
 		{ NFS_MOUNT_NOCTO, ",nocto", "" },
 		{ NFS_MOUNT_NOAC, ",noac", "" },
@@ -943,11 +966,6 @@ static int nfs_parse_security_flavors(char *value,
 	return 1;
 }
 
-static void nfs_parse_invalid_value(const char *option)
-{
-	dfprintk(MOUNT, "NFS:   bad value specified for %s option\n", option);
-}
-
 /*
  * Error-check and convert a string of mount options from user space into
  * a data structure.  The whole mount string is processed; bad options are
@@ -958,7 +976,7 @@ static int nfs_parse_mount_options(char *raw,
 				   struct nfs_parsed_mount_data *mnt)
 {
 	char *p, *string, *secdata;
-	int rc, sloppy = 0, errors = 0;
+	int rc, sloppy = 0, invalid_option = 0;
 
 	if (!raw) {
 		dfprintk(MOUNT, "NFS: mount options string was NULL.\n");
@@ -982,7 +1000,9 @@ static int nfs_parse_mount_options(char *raw,
 
 	while ((p = strsep(&raw, ",")) != NULL) {
 		substring_t args[MAX_OPT_ARGS];
-		int option, token;
+		unsigned long option;
+		int int_option;
+		int token;
 
 		if (!*p)
 			continue;
@@ -1091,114 +1111,156 @@ static int nfs_parse_mount_options(char *raw,
 		 * options that take numeric values
 		 */
 		case Opt_port:
-			if (match_int(args, &option) ||
-			    option < 0 || option > USHORT_MAX) {
-				errors++;
-				nfs_parse_invalid_value("port");
-			} else
-				mnt->nfs_server.port = option;
+			string = match_strdup(args);
+			if (string == NULL)
+				goto out_nomem;
+			rc = strict_strtoul(string, 10, &option);
+			kfree(string);
+			if (rc != 0 || option > USHORT_MAX)
+				goto out_invalid_value;
+			mnt->nfs_server.port = option;
 			break;
 		case Opt_rsize:
-			if (match_int(args, &option) || option < 0) {
-				errors++;
-				nfs_parse_invalid_value("rsize");
-			} else
-				mnt->rsize = option;
+			string = match_strdup(args);
+			if (string == NULL)
+				goto out_nomem;
+			rc = strict_strtoul(string, 10, &option);
+			kfree(string);
+			if (rc != 0)
+				goto out_invalid_value;
+			mnt->rsize = option;
 			break;
 		case Opt_wsize:
-			if (match_int(args, &option) || option < 0) {
-				errors++;
-				nfs_parse_invalid_value("wsize");
-			} else
-				mnt->wsize = option;
+			string = match_strdup(args);
+			if (string == NULL)
+				goto out_nomem;
+			rc = strict_strtoul(string, 10, &option);
+			kfree(string);
+			if (rc != 0)
+				goto out_invalid_value;
+			mnt->wsize = option;
 			break;
 		case Opt_bsize:
-			if (match_int(args, &option) || option < 0) {
-				errors++;
-				nfs_parse_invalid_value("bsize");
-			} else
-				mnt->bsize = option;
+			string = match_strdup(args);
+			if (string == NULL)
+				goto out_nomem;
+			rc = strict_strtoul(string, 10, &option);
+			kfree(string);
+			if (rc != 0)
+				goto out_invalid_value;
+			mnt->bsize = option;
 			break;
 		case Opt_timeo:
-			if (match_int(args, &option) || option <= 0) {
-				errors++;
-				nfs_parse_invalid_value("timeo");
-			} else
-				mnt->timeo = option;
+			string = match_strdup(args);
+			if (string == NULL)
+				goto out_nomem;
+			rc = strict_strtoul(string, 10, &option);
+			kfree(string);
+			if (rc != 0 || option == 0)
+				goto out_invalid_value;
+			mnt->timeo = option;
 			break;
 		case Opt_retrans:
-			if (match_int(args, &option) || option <= 0) {
-				errors++;
-				nfs_parse_invalid_value("retrans");
-			} else
-				mnt->retrans = option;
+			string = match_strdup(args);
+			if (string == NULL)
+				goto out_nomem;
+			rc = strict_strtoul(string, 10, &option);
+			kfree(string);
+			if (rc != 0 || option == 0)
+				goto out_invalid_value;
+			mnt->retrans = option;
 			break;
 		case Opt_acregmin:
-			if (match_int(args, &option) || option < 0) {
-				errors++;
-				nfs_parse_invalid_value("acregmin");
-			} else
-				mnt->acregmin = option;
+			string = match_strdup(args);
+			if (string == NULL)
+				goto out_nomem;
+			rc = strict_strtoul(string, 10, &option);
+			kfree(string);
+			if (rc != 0)
+				goto out_invalid_value;
+			mnt->acregmin = option;
 			break;
 		case Opt_acregmax:
-			if (match_int(args, &option) || option < 0) {
-				errors++;
-				nfs_parse_invalid_value("acregmax");
-			} else
-				mnt->acregmax = option;
+			string = match_strdup(args);
+			if (string == NULL)
+				goto out_nomem;
+			rc = strict_strtoul(string, 10, &option);
+			kfree(string);
+			if (rc != 0)
+				goto out_invalid_value;
+			mnt->acregmax = option;
 			break;
 		case Opt_acdirmin:
-			if (match_int(args, &option) || option < 0) {
-				errors++;
-				nfs_parse_invalid_value("acdirmin");
-			} else
-				mnt->acdirmin = option;
+			string = match_strdup(args);
+			if (string == NULL)
+				goto out_nomem;
+			rc = strict_strtoul(string, 10, &option);
+			kfree(string);
+			if (rc != 0)
+				goto out_invalid_value;
+			mnt->acdirmin = option;
 			break;
 		case Opt_acdirmax:
-			if (match_int(args, &option) || option < 0) {
-				errors++;
-				nfs_parse_invalid_value("acdirmax");
-			} else
-				mnt->acdirmax = option;
+			string = match_strdup(args);
+			if (string == NULL)
+				goto out_nomem;
+			rc = strict_strtoul(string, 10, &option);
+			kfree(string);
+			if (rc != 0)
+				goto out_invalid_value;
+			mnt->acdirmax = option;
 			break;
 		case Opt_actimeo:
-			if (match_int(args, &option) || option < 0) {
-				errors++;
-				nfs_parse_invalid_value("actimeo");
-			} else
-				mnt->acregmin = mnt->acregmax =
-				mnt->acdirmin = mnt->acdirmax = option;
+			string = match_strdup(args);
+			if (string == NULL)
+				goto out_nomem;
+			rc = strict_strtoul(string, 10, &option);
+			kfree(string);
+			if (rc != 0)
+				goto out_invalid_value;
+			mnt->acregmin = mnt->acregmax =
+			mnt->acdirmin = mnt->acdirmax = option;
 			break;
 		case Opt_namelen:
-			if (match_int(args, &option) || option < 0) {
-				errors++;
-				nfs_parse_invalid_value("namlen");
-			} else
-				mnt->namlen = option;
+			string = match_strdup(args);
+			if (string == NULL)
+				goto out_nomem;
+			rc = strict_strtoul(string, 10, &option);
+			kfree(string);
+			if (rc != 0)
+				goto out_invalid_value;
+			mnt->namlen = option;
 			break;
 		case Opt_mountport:
-			if (match_int(args, &option) ||
-			    option < 0 || option > USHORT_MAX) {
-				errors++;
-				nfs_parse_invalid_value("mountport");
-			} else
-				mnt->mount_server.port = option;
+			string = match_strdup(args);
+			if (string == NULL)
+				goto out_nomem;
+			rc = strict_strtoul(string, 10, &option);
+			kfree(string);
+			if (rc != 0 || option > USHORT_MAX)
+				goto out_invalid_value;
+			mnt->mount_server.port = option;
 			break;
 		case Opt_mountvers:
-			if (match_int(args, &option) ||
+			string = match_strdup(args);
+			if (string == NULL)
+				goto out_nomem;
+			rc = strict_strtoul(string, 10, &option);
+			kfree(string);
+			if (rc != 0 ||
 			    option < NFS_MNT_VERSION ||
-			    option > NFS_MNT3_VERSION) {
-				errors++;
-				nfs_parse_invalid_value("mountvers");
-			} else
-				mnt->mount_server.version = option;
+			    option > NFS_MNT3_VERSION)
+				goto out_invalid_value;
+			mnt->mount_server.version = option;
 			break;
 		case Opt_nfsvers:
-			if (match_int(args, &option)) {
-				errors++;
-				nfs_parse_invalid_value("nfsvers");
-				break;
-			}
+			string = match_strdup(args);
+			if (string == NULL)
+				goto out_nomem;
+			rc = strict_strtoul(string, 10, &option);
+			kfree(string);
+			if (rc != 0)
+				goto out_invalid_value;
 			switch (option) {
 			case NFS2_VERSION:
 				mnt->flags &= ~NFS_MOUNT_VER3;
@@ -1207,10 +1269,16 @@ static int nfs_parse_mount_options(char *raw,
 				mnt->flags |= NFS_MOUNT_VER3;
 				break;
 			default:
-				errors++;
-				nfs_parse_invalid_value("nfsvers");
+				goto out_invalid_value;
 			}
 			break;
+		case Opt_minorversion:
+			if (match_int(args, &int_option))
+				return 0;
+			if (int_option < 0 || int_option > NFS4_MAX_MINOR_VERSION)
+				return 0;
+			mnt->minorversion = int_option;
+			break;
 
 		/*
 		 * options that take text values
@@ -1222,9 +1290,9 @@ static int nfs_parse_mount_options(char *raw,
 			rc = nfs_parse_security_flavors(string, mnt);
 			kfree(string);
 			if (!rc) {
-				errors++;
 				dfprintk(MOUNT, "NFS:   unrecognized "
 						"security flavor\n");
+				return 0;
 			}
 			break;
 		case Opt_proto:
@@ -1238,23 +1306,25 @@ static int nfs_parse_mount_options(char *raw,
 			case Opt_xprt_udp:
 				mnt->flags &= ~NFS_MOUNT_TCP;
 				mnt->nfs_server.protocol = XPRT_TRANSPORT_UDP;
+				kfree(string);
 				break;
 			case Opt_xprt_tcp:
 				mnt->flags |= NFS_MOUNT_TCP;
 				mnt->nfs_server.protocol = XPRT_TRANSPORT_TCP;
+				kfree(string);
 				break;
 			case Opt_xprt_rdma:
 				/* vector side protocols to TCP */
 				mnt->flags |= NFS_MOUNT_TCP;
 				mnt->nfs_server.protocol = XPRT_TRANSPORT_RDMA;
 				xprt_load_transport(string);
+				kfree(string);
 				break;
 			default:
-				errors++;
 				dfprintk(MOUNT, "NFS:   unrecognized "
 						"transport protocol\n");
+				return 0;
 			}
-			kfree(string);
 			break;
 		case Opt_mountproto:
 			string = match_strdup(args);
@@ -1273,9 +1343,9 @@ static int nfs_parse_mount_options(char *raw,
 				break;
 			case Opt_xprt_rdma: /* not used for side protocols */
 			default:
-				errors++;
 				dfprintk(MOUNT, "NFS:   unrecognized "
 						"transport protocol\n");
+				return 0;
 			}
 			break;
 		case Opt_addr:
@@ -1331,9 +1401,9 @@ static int nfs_parse_mount_options(char *raw,
 					mnt->flags |= NFS_MOUNT_LOOKUP_CACHE_NONEG|NFS_MOUNT_LOOKUP_CACHE_NONE;
 					break;
 				default:
-					errors++;
 					dfprintk(MOUNT, "NFS:   invalid "
 							"lookupcache argument\n");
+					return 0;
 			};
 			break;
 
@@ -1351,20 +1421,20 @@ static int nfs_parse_mount_options(char *raw,
 			break;
 
 		default:
-			errors++;
+			invalid_option = 1;
 			dfprintk(MOUNT, "NFS:   unrecognized mount option "
 					"'%s'\n", p);
 		}
 	}
 
-	if (errors > 0) {
-		dfprintk(MOUNT, "NFS: parsing encountered %d error%s\n",
-				errors, (errors == 1 ? "" : "s"));
-		if (!sloppy)
-			return 0;
-	}
+	if (!sloppy && invalid_option)
+		return 0;
+
 	return 1;
 
+out_invalid_value:
+	printk(KERN_INFO "NFS: bad mount option value specified: %s \n", p);
+	return 0;
 out_nomem:
 	printk(KERN_INFO "NFS: not enough memory to parse option\n");
 	return 0;
@@ -1381,6 +1451,7 @@ out_security_failure:
 static int nfs_try_mount(struct nfs_parsed_mount_data *args,
 			 struct nfs_fh *root_fh)
 {
+	unsigned int auth_flavor_len = 0;
 	struct nfs_mount_request request = {
 		.sap		= (struct sockaddr *)
 						&args->mount_server.address,
@@ -1388,6 +1459,7 @@ static int nfs_try_mount(struct nfs_parsed_mount_data *args,
 		.protocol	= args->mount_server.protocol,
 		.fh		= root_fh,
 		.noresvport	= args->flags & NFS_MOUNT_NORESVPORT,
+		.auth_flav_len	= &auth_flavor_len,
 	};
 	int status;
 
@@ -2240,6 +2312,11 @@ static void nfs4_fill_super(struct super_block *sb)
 	nfs_initialise_sb(sb);
 }
 
+static void nfs4_validate_mount_flags(struct nfs_parsed_mount_data *args)
+{
+	args->flags &= ~(NFS_MOUNT_NONLM|NFS_MOUNT_NOACL|NFS_MOUNT_VER3);
+}
+
 /*
  * Validate NFSv4 mount options
  */
@@ -2263,6 +2340,7 @@ static int nfs4_validate_mount_data(void *options,
 	args->nfs_server.port	= NFS_PORT; /* 2049 unless user set port= */
 	args->auth_flavors[0]	= RPC_AUTH_UNIX;
 	args->auth_flavor_len	= 0;
+	args->minorversion	= 0;
 
 	switch (data->version) {
 	case 1:
@@ -2336,6 +2414,8 @@ static int nfs4_validate_mount_data(void *options,
 
 		nfs_validate_transport_protocol(args);
 
+		nfs4_validate_mount_flags(args);
+
 		if (args->auth_flavor_len > 1)
 			goto out_inval_auth;
 
@@ -2375,12 +2455,12 @@ out_no_client_address:
 }
 
 /*
- * Get the superblock for an NFS4 mountpoint
+ * Get the superblock for the NFS4 root partition
  */
-static int nfs4_get_sb(struct file_system_type *fs_type,
+static int nfs4_remote_get_sb(struct file_system_type *fs_type,
 	int flags, const char *dev_name, void *raw_data, struct vfsmount *mnt)
 {
-	struct nfs_parsed_mount_data *data;
+	struct nfs_parsed_mount_data *data = raw_data;
 	struct super_block *s;
 	struct nfs_server *server;
 	struct nfs_fh *mntfh;
@@ -2391,18 +2471,12 @@ static int nfs4_get_sb(struct file_system_type *fs_type,
 	};
 	int error = -ENOMEM;
 
-	data = kzalloc(sizeof(*data), GFP_KERNEL);
 	mntfh = kzalloc(sizeof(*mntfh), GFP_KERNEL);
 	if (data == NULL || mntfh == NULL)
 		goto out_free_fh;
 
 	security_init_mnt_opts(&data->lsm_opts);
 
-	/* Validate the mount data */
-	error = nfs4_validate_mount_data(raw_data, data, dev_name);
-	if (error < 0)
-		goto out;
-
 	/* Get a volume representation */
 	server = nfs4_create_server(data, mntfh);
 	if (IS_ERR(server)) {
@@ -2415,7 +2489,7 @@ static int nfs4_get_sb(struct file_system_type *fs_type,
 		compare_super = NULL;
 
 	/* Get a superblock - note that we may end up sharing one that already exists */
-	s = sget(fs_type, compare_super, nfs_set_super, &sb_mntdata);
+	s = sget(&nfs4_fs_type, compare_super, nfs_set_super, &sb_mntdata);
 	if (IS_ERR(s)) {
 		error = PTR_ERR(s);
 		goto out_free;
@@ -2452,14 +2526,9 @@ static int nfs4_get_sb(struct file_system_type *fs_type,
 	error = 0;
 
 out:
-	kfree(data->client_address);
-	kfree(data->nfs_server.export_path);
-	kfree(data->nfs_server.hostname);
-	kfree(data->fscache_uniq);
 	security_free_mnt_opts(&data->lsm_opts);
 out_free_fh:
 	kfree(mntfh);
-	kfree(data);
 	return error;
 
 out_free:
@@ -2473,16 +2542,137 @@ error_splat_super:
 	goto out;
 }
 
+static struct vfsmount *nfs_do_root_mount(struct file_system_type *fs_type,
+		int flags, void *data, const char *hostname)
+{
+	struct vfsmount *root_mnt;
+	char *root_devname;
+	size_t len;
+
+	len = strlen(hostname) + 3;
+	root_devname = kmalloc(len, GFP_KERNEL);
+	if (root_devname == NULL)
+		return ERR_PTR(-ENOMEM);
+	snprintf(root_devname, len, "%s:/", hostname);
+	root_mnt = vfs_kern_mount(fs_type, flags, root_devname, data);
+	kfree(root_devname);
+	return root_mnt;
+}
+
+static void nfs_fix_devname(const struct path *path, struct vfsmount *mnt)
+{
+	char *page = (char *) __get_free_page(GFP_KERNEL);
+	char *devname, *tmp;
+
+	if (page == NULL)
+		return;
+	devname = nfs_path(path->mnt->mnt_devname,
+			path->mnt->mnt_root, path->dentry,
+			page, PAGE_SIZE);
+	if (devname == NULL)
+		goto out_freepage;
+	tmp = kstrdup(devname, GFP_KERNEL);
+	if (tmp == NULL)
+		goto out_freepage;
+	kfree(mnt->mnt_devname);
+	mnt->mnt_devname = tmp;
+out_freepage:
+	free_page((unsigned long)page);
+}
+
+static int nfs_follow_remote_path(struct vfsmount *root_mnt,
+		const char *export_path, struct vfsmount *mnt_target)
+{
+	struct mnt_namespace *ns_private;
+	struct nameidata nd;
+	struct super_block *s;
+	int ret;
+
+	ns_private = create_mnt_ns(root_mnt);
+	ret = PTR_ERR(ns_private);
+	if (IS_ERR(ns_private))
+		goto out_mntput;
+
+	ret = vfs_path_lookup(root_mnt->mnt_root, root_mnt,
+			export_path, LOOKUP_FOLLOW, &nd);
+
+	put_mnt_ns(ns_private);
+
+	if (ret != 0)
+		goto out_err;
+
+	s = nd.path.mnt->mnt_sb;
+	atomic_inc(&s->s_active);
+	mnt_target->mnt_sb = s;
+	mnt_target->mnt_root = dget(nd.path.dentry);
+
+	/* Correct the device pathname */
+	nfs_fix_devname(&nd.path, mnt_target);
+
+	path_put(&nd.path);
+	down_write(&s->s_umount);
+	return 0;
+out_mntput:
+	mntput(root_mnt);
+out_err:
+	return ret;
+}
+
+/*
+ * Get the superblock for an NFS4 mountpoint
+ */
+static int nfs4_get_sb(struct file_system_type *fs_type,
+	int flags, const char *dev_name, void *raw_data, struct vfsmount *mnt)
+{
+	struct nfs_parsed_mount_data *data;
+	char *export_path;
+	struct vfsmount *root_mnt;
+	int error = -ENOMEM;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (data == NULL)
+		goto out_free_data;
+
+	/* Validate the mount data */
+	error = nfs4_validate_mount_data(raw_data, data, dev_name);
+	if (error < 0)
+		goto out;
+
+	export_path = data->nfs_server.export_path;
+	data->nfs_server.export_path = "/";
+	root_mnt = nfs_do_root_mount(&nfs4_remote_fs_type, flags, data,
+			data->nfs_server.hostname);
+	data->nfs_server.export_path = export_path;
+
+	error = PTR_ERR(root_mnt);
+	if (IS_ERR(root_mnt))
+		goto out;
+
+	error = nfs_follow_remote_path(root_mnt, export_path, mnt);
+
+out:
+	kfree(data->client_address);
+	kfree(data->nfs_server.export_path);
+	kfree(data->nfs_server.hostname);
+	kfree(data->fscache_uniq);
+out_free_data:
+	kfree(data);
+	dprintk("<-- nfs4_get_sb() = %d%s\n", error,
+			error != 0 ? " [error]" : "");
+	return error;
+}
+
 static void nfs4_kill_super(struct super_block *sb)
 {
 	struct nfs_server *server = NFS_SB(sb);
 
+	dprintk("--> %s\n", __func__);
 	nfs_super_return_all_delegations(sb);
 	kill_anon_super(sb);
-
 	nfs4_renewd_prepare_shutdown(server);
 	nfs_fscache_release_super_cookie(sb);
 	nfs_free_server(server);
+	dprintk("<-- %s\n", __func__);
 }
 
 /*
@@ -2568,12 +2758,9 @@ error_splat_super:
 	return error;
 }
 
-/*
- * Create an NFS4 server record on referral traversal
- */
-static int nfs4_referral_get_sb(struct file_system_type *fs_type, int flags,
-				const char *dev_name, void *raw_data,
-				struct vfsmount *mnt)
+static int nfs4_remote_referral_get_sb(struct file_system_type *fs_type,
+		int flags, const char *dev_name, void *raw_data,
+		struct vfsmount *mnt)
 {
 	struct nfs_clone_mount *data = raw_data;
 	struct super_block *s;
@@ -2652,4 +2839,36 @@ error_splat_super:
 	return error;
 }
 
+/*
+ * Create an NFS4 server record on referral traversal
+ */
+static int nfs4_referral_get_sb(struct file_system_type *fs_type,
+		int flags, const char *dev_name, void *raw_data,
+		struct vfsmount *mnt)
+{
+	struct nfs_clone_mount *data = raw_data;
+	char *export_path;
+	struct vfsmount *root_mnt;
+	int error;
+
+	dprintk("--> nfs4_referral_get_sb()\n");
+
+	export_path = data->mnt_path;
+	data->mnt_path = "/";
+
+	root_mnt = nfs_do_root_mount(&nfs4_remote_referral_fs_type,
+			flags, data, data->hostname);
+	data->mnt_path = export_path;
+
+	error = PTR_ERR(root_mnt);
+	if (IS_ERR(root_mnt))
+		goto out;
+
+	error = nfs_follow_remote_path(root_mnt, export_path, mnt);
+out:
+	dprintk("<-- nfs4_referral_get_sb() = %d%s\n", error,
+			error != 0 ? " [error]" : "");
+	return error;
+}
+
 #endif /* CONFIG_NFS_V4 */
diff --git a/fs/nfs/unlink.c b/fs/nfs/unlink.c
index ecc29534777..1064c91ae81 100644
--- a/fs/nfs/unlink.c
+++ b/fs/nfs/unlink.c
@@ -15,6 +15,7 @@
 #include <linux/wait.h>
 
 #include "internal.h"
+#include "nfs4_fs.h"
 
 struct nfs_unlinkdata {
 	struct hlist_node list;
@@ -82,7 +83,7 @@ static void nfs_async_unlink_done(struct rpc_task *task, void *calldata)
 	struct inode *dir = data->dir;
 
 	if (!NFS_PROTO(dir)->unlink_done(task, dir))
-		rpc_restart_call(task);
+		nfs4_restart_rpc(task, NFS_SERVER(dir)->nfs_client);
 }
 
 /**
@@ -102,9 +103,25 @@ static void nfs_async_unlink_release(void *calldata)
 	nfs_sb_deactive(sb);
 }
 
+#if defined(CONFIG_NFS_V4_1)
+void nfs_unlink_prepare(struct rpc_task *task, void *calldata)
+{
+	struct nfs_unlinkdata *data = calldata;
+	struct nfs_server *server = NFS_SERVER(data->dir);
+
+	if (nfs4_setup_sequence(server->nfs_client, &data->args.seq_args,
+				&data->res.seq_res, 1, task))
+		return;
+	rpc_call_start(task);
+}
+#endif /* CONFIG_NFS_V4_1 */
+
 static const struct rpc_call_ops nfs_unlink_ops = {
 	.rpc_call_done = nfs_async_unlink_done,
 	.rpc_release = nfs_async_unlink_release,
+#if defined(CONFIG_NFS_V4_1)
+	.rpc_call_prepare = nfs_unlink_prepare,
+#endif /* CONFIG_NFS_V4_1 */
 };
 
 static int nfs_do_call_unlink(struct dentry *parent, struct inode *dir, struct nfs_unlinkdata *data)
@@ -241,6 +258,7 @@ nfs_async_unlink(struct inode *dir, struct dentry *dentry)
 		status = PTR_ERR(data->cred);
 		goto out_free;
 	}
+	data->res.seq_res.sr_slotid = NFS4_MAX_SLOT_TABLE;
 
 	status = -EBUSY;
 	spin_lock(&dentry->d_lock);
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index e560a78995a..ce728829f79 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -25,6 +25,7 @@
 #include "delegation.h"
 #include "internal.h"
 #include "iostat.h"
+#include "nfs4_fs.h"
 
 #define NFSDBG_FACILITY		NFSDBG_PAGECACHE
 
@@ -52,6 +53,7 @@ struct nfs_write_data *nfs_commitdata_alloc(void)
 	if (p) {
 		memset(p, 0, sizeof(*p));
 		INIT_LIST_HEAD(&p->pages);
+		p->res.seq_res.sr_slotid = NFS4_MAX_SLOT_TABLE;
 	}
 	return p;
 }
@@ -71,6 +73,7 @@ struct nfs_write_data *nfs_writedata_alloc(unsigned int pagecount)
 		memset(p, 0, sizeof(*p));
 		INIT_LIST_HEAD(&p->pages);
 		p->npages = pagecount;
+		p->res.seq_res.sr_slotid = NFS4_MAX_SLOT_TABLE;
 		if (pagecount <= ARRAY_SIZE(p->page_array))
 			p->pagevec = p->page_array;
 		else {
@@ -1048,7 +1051,23 @@ out:
 	nfs_writedata_release(calldata);
 }
 
+#if defined(CONFIG_NFS_V4_1)
+void nfs_write_prepare(struct rpc_task *task, void *calldata)
+{
+	struct nfs_write_data *data = calldata;
+	struct nfs_client *clp = (NFS_SERVER(data->inode))->nfs_client;
+
+	if (nfs4_setup_sequence(clp, &data->args.seq_args,
+				&data->res.seq_res, 1, task))
+		return;
+	rpc_call_start(task);
+}
+#endif /* CONFIG_NFS_V4_1 */
+
 static const struct rpc_call_ops nfs_write_partial_ops = {
+#if defined(CONFIG_NFS_V4_1)
+	.rpc_call_prepare = nfs_write_prepare,
+#endif /* CONFIG_NFS_V4_1 */
 	.rpc_call_done = nfs_writeback_done_partial,
 	.rpc_release = nfs_writeback_release_partial,
 };
@@ -1111,6 +1130,9 @@ remove_request:
 }
 
 static const struct rpc_call_ops nfs_write_full_ops = {
+#if defined(CONFIG_NFS_V4_1)
+	.rpc_call_prepare = nfs_write_prepare,
+#endif /* CONFIG_NFS_V4_1 */
 	.rpc_call_done = nfs_writeback_done_full,
 	.rpc_release = nfs_writeback_release_full,
 };
@@ -1123,6 +1145,7 @@ int nfs_writeback_done(struct rpc_task *task, struct nfs_write_data *data)
 {
 	struct nfs_writeargs	*argp = &data->args;
 	struct nfs_writeres	*resp = &data->res;
+	struct nfs_server	*server = NFS_SERVER(data->inode);
 	int status;
 
 	dprintk("NFS: %5u nfs_writeback_done (status %d)\n",
@@ -1155,7 +1178,7 @@ int nfs_writeback_done(struct rpc_task *task, struct nfs_write_data *data)
 		if (time_before(complain, jiffies)) {
 			dprintk("NFS:       faulty NFS server %s:"
 				" (committed = %d) != (stable = %d)\n",
-				NFS_SERVER(data->inode)->nfs_client->cl_hostname,
+				server->nfs_client->cl_hostname,
 				resp->verf->committed, argp->stable);
 			complain = jiffies + 300 * HZ;
 		}
@@ -1181,7 +1204,7 @@ int nfs_writeback_done(struct rpc_task *task, struct nfs_write_data *data)
 				 */
 				argp->stable = NFS_FILE_SYNC;
 			}
-			rpc_restart_call(task);
+			nfs4_restart_rpc(task, server->nfs_client);
 			return -EAGAIN;
 		}
 		if (time_before(complain, jiffies)) {
@@ -1193,6 +1216,7 @@ int nfs_writeback_done(struct rpc_task *task, struct nfs_write_data *data)
 		/* Can't do anything about it except throw an error. */
 		task->tk_status = -EIO;
 	}
+	nfs4_sequence_free_slot(server->nfs_client, &data->res.seq_res);
 	return 0;
 }
 
@@ -1349,6 +1373,9 @@ static void nfs_commit_release(void *calldata)
 }
 
 static const struct rpc_call_ops nfs_commit_ops = {
+#if defined(CONFIG_NFS_V4_1)
+	.rpc_call_prepare = nfs_write_prepare,
+#endif /* CONFIG_NFS_V4_1 */
 	.rpc_call_done = nfs_commit_done,
 	.rpc_release = nfs_commit_release,
 };
diff --git a/fs/nfsd/export.c b/fs/nfsd/export.c
index 8b1f8efb469..b92a27629fb 100644
--- a/fs/nfsd/export.c
+++ b/fs/nfsd/export.c
@@ -464,16 +464,11 @@ static int secinfo_parse(char **mesg, char *buf, struct svc_export *exp)
 		if (err)
 			return err;
 		/*
-		 * Just a quick sanity check; we could also try to check
-		 * whether this pseudoflavor is supported, but at worst
-		 * an unsupported pseudoflavor on the export would just
-		 * be a pseudoflavor that won't match the flavor of any
-		 * authenticated request.  The administrator will
-		 * probably discover the problem when someone fails to
-		 * authenticate.
+		 * XXX: It would be nice to also check whether this
+		 * pseudoflavor is supported, so we can discover the
+		 * problem at export time instead of when a client fails
+		 * to authenticate.
 		 */
-		if (f->pseudoflavor < 0)
-			return -EINVAL;
 		err = get_int(mesg, &f->flags);
 		if (err)
 			return err;
diff --git a/fs/nfsd/nfs3proc.c b/fs/nfsd/nfs3proc.c
index 7c9fe838f03..a713c418a92 100644
--- a/fs/nfsd/nfs3proc.c
+++ b/fs/nfsd/nfs3proc.c
@@ -652,8 +652,6 @@ nfsd3_proc_commit(struct svc_rqst * rqstp, struct nfsd3_commitargs *argp,
  * NFSv3 Server procedures.
  * Only the results of non-idempotent operations are cached.
  */
-#define nfs3svc_decode_voidargs		NULL
-#define nfs3svc_release_void		NULL
 #define nfs3svc_decode_fhandleargs	nfs3svc_decode_fhandle
 #define nfs3svc_encode_attrstatres	nfs3svc_encode_attrstat
 #define nfs3svc_encode_wccstatres	nfs3svc_encode_wccstat
@@ -686,28 +684,219 @@ struct nfsd3_voidargs { int dummy; };
 #define WC (7+pAT)	/* WCC attributes */
 
 static struct svc_procedure		nfsd_procedures3[22] = {
-  PROC(null,	 void,		void,		void,	  RC_NOCACHE, ST),
-  PROC(getattr,	 fhandle,	attrstat,	fhandle,  RC_NOCACHE, ST+AT),
-  PROC(setattr,  sattr,		wccstat,	fhandle,  RC_REPLBUFF, ST+WC),
-  PROC(lookup,	 dirop,		dirop,		fhandle2, RC_NOCACHE, ST+FH+pAT+pAT),
-  PROC(access,	 access,	access,		fhandle,  RC_NOCACHE, ST+pAT+1),
-  PROC(readlink, readlink,	readlink,	fhandle,  RC_NOCACHE, ST+pAT+1+NFS3_MAXPATHLEN/4),
-  PROC(read,	 read,		read,		fhandle,  RC_NOCACHE, ST+pAT+4+NFSSVC_MAXBLKSIZE/4),
-  PROC(write,	 write,		write,		fhandle,  RC_REPLBUFF, ST+WC+4),
-  PROC(create,	 create,	create,		fhandle2, RC_REPLBUFF, ST+(1+FH+pAT)+WC),
-  PROC(mkdir,	 mkdir,		create,		fhandle2, RC_REPLBUFF, ST+(1+FH+pAT)+WC),
-  PROC(symlink,	 symlink,	create,		fhandle2, RC_REPLBUFF, ST+(1+FH+pAT)+WC),
-  PROC(mknod,	 mknod,		create,		fhandle2, RC_REPLBUFF, ST+(1+FH+pAT)+WC),
-  PROC(remove,	 dirop,		wccstat,	fhandle,  RC_REPLBUFF, ST+WC),
-  PROC(rmdir,	 dirop,		wccstat,	fhandle,  RC_REPLBUFF, ST+WC),
-  PROC(rename,	 rename,	rename,		fhandle2, RC_REPLBUFF, ST+WC+WC),
-  PROC(link,	 link,		link,		fhandle2, RC_REPLBUFF, ST+pAT+WC),
-  PROC(readdir,	 readdir,	readdir,	fhandle,  RC_NOCACHE, 0),
-  PROC(readdirplus,readdirplus,	readdir,	fhandle,  RC_NOCACHE, 0),
-  PROC(fsstat,	 fhandle,	fsstat,		void,     RC_NOCACHE, ST+pAT+2*6+1),
-  PROC(fsinfo,   fhandle,	fsinfo,		void,     RC_NOCACHE, ST+pAT+12),
-  PROC(pathconf, fhandle,	pathconf,	void,     RC_NOCACHE, ST+pAT+6),
-  PROC(commit,	 commit,	commit,		fhandle,  RC_NOCACHE, ST+WC+2),
+	[NFS3PROC_NULL] = {
+		.pc_func = (svc_procfunc) nfsd3_proc_null,
+		.pc_encode = (kxdrproc_t) nfs3svc_encode_voidres,
+		.pc_argsize = sizeof(struct nfsd3_voidargs),
+		.pc_ressize = sizeof(struct nfsd3_voidres),
+		.pc_cachetype = RC_NOCACHE,
+		.pc_xdrressize = ST,
+	},
+	[NFS3PROC_GETATTR] = {
+		.pc_func = (svc_procfunc) nfsd3_proc_getattr,
+		.pc_decode = (kxdrproc_t) nfs3svc_decode_fhandleargs,
+		.pc_encode = (kxdrproc_t) nfs3svc_encode_attrstatres,
+		.pc_release = (kxdrproc_t) nfs3svc_release_fhandle,
+		.pc_argsize = sizeof(struct nfsd3_fhandleargs),
+		.pc_ressize = sizeof(struct nfsd3_attrstatres),
+		.pc_cachetype = RC_NOCACHE,
+		.pc_xdrressize = ST+AT,
+	},
+	[NFS3PROC_SETATTR] = {
+		.pc_func = (svc_procfunc) nfsd3_proc_setattr,
+		.pc_decode = (kxdrproc_t) nfs3svc_decode_sattrargs,
+		.pc_encode = (kxdrproc_t) nfs3svc_encode_wccstatres,
+		.pc_release = (kxdrproc_t) nfs3svc_release_fhandle,
+		.pc_argsize = sizeof(struct nfsd3_sattrargs),
+		.pc_ressize = sizeof(struct nfsd3_wccstatres),
+		.pc_cachetype = RC_REPLBUFF,
+		.pc_xdrressize = ST+WC,
+	},
+	[NFS3PROC_LOOKUP] = {
+		.pc_func = (svc_procfunc) nfsd3_proc_lookup,
+		.pc_decode = (kxdrproc_t) nfs3svc_decode_diropargs,
+		.pc_encode = (kxdrproc_t) nfs3svc_encode_diropres,
+		.pc_release = (kxdrproc_t) nfs3svc_release_fhandle2,
+		.pc_argsize = sizeof(struct nfsd3_diropargs),
+		.pc_ressize = sizeof(struct nfsd3_diropres),
+		.pc_cachetype = RC_NOCACHE,
+		.pc_xdrressize = ST+FH+pAT+pAT,
+	},
+	[NFS3PROC_ACCESS] = {
+		.pc_func = (svc_procfunc) nfsd3_proc_access,
+		.pc_decode = (kxdrproc_t) nfs3svc_decode_accessargs,
+		.pc_encode = (kxdrproc_t) nfs3svc_encode_accessres,
+		.pc_release = (kxdrproc_t) nfs3svc_release_fhandle,
+		.pc_argsize = sizeof(struct nfsd3_accessargs),
+		.pc_ressize = sizeof(struct nfsd3_accessres),
+		.pc_cachetype = RC_NOCACHE,
+		.pc_xdrressize = ST+pAT+1,
+	},
+	[NFS3PROC_READLINK] = {
+		.pc_func = (svc_procfunc) nfsd3_proc_readlink,
+		.pc_decode = (kxdrproc_t) nfs3svc_decode_readlinkargs,
+		.pc_encode = (kxdrproc_t) nfs3svc_encode_readlinkres,
+		.pc_release = (kxdrproc_t) nfs3svc_release_fhandle,
+		.pc_argsize = sizeof(struct nfsd3_readlinkargs),
+		.pc_ressize = sizeof(struct nfsd3_readlinkres),
+		.pc_cachetype = RC_NOCACHE,
+		.pc_xdrressize = ST+pAT+1+NFS3_MAXPATHLEN/4,
+	},
+	[NFS3PROC_READ] = {
+		.pc_func = (svc_procfunc) nfsd3_proc_read,
+		.pc_decode = (kxdrproc_t) nfs3svc_decode_readargs,
+		.pc_encode = (kxdrproc_t) nfs3svc_encode_readres,
+		.pc_release = (kxdrproc_t) nfs3svc_release_fhandle,
+		.pc_argsize = sizeof(struct nfsd3_readargs),
+		.pc_ressize = sizeof(struct nfsd3_readres),
+		.pc_cachetype = RC_NOCACHE,
+		.pc_xdrressize = ST+pAT+4+NFSSVC_MAXBLKSIZE/4,
+	},
+	[NFS3PROC_WRITE] = {
+		.pc_func = (svc_procfunc) nfsd3_proc_write,
+		.pc_decode = (kxdrproc_t) nfs3svc_decode_writeargs,
+		.pc_encode = (kxdrproc_t) nfs3svc_encode_writeres,
+		.pc_release = (kxdrproc_t) nfs3svc_release_fhandle,
+		.pc_argsize = sizeof(struct nfsd3_writeargs),
+		.pc_ressize = sizeof(struct nfsd3_writeres),
+		.pc_cachetype = RC_REPLBUFF,
+		.pc_xdrressize = ST+WC+4,
+	},
+	[NFS3PROC_CREATE] = {
+		.pc_func = (svc_procfunc) nfsd3_proc_create,
+		.pc_decode = (kxdrproc_t) nfs3svc_decode_createargs,
+		.pc_encode = (kxdrproc_t) nfs3svc_encode_createres,
+		.pc_release = (kxdrproc_t) nfs3svc_release_fhandle2,
+		.pc_argsize = sizeof(struct nfsd3_createargs),
+		.pc_ressize = sizeof(struct nfsd3_createres),
+		.pc_cachetype = RC_REPLBUFF,
+		.pc_xdrressize = ST+(1+FH+pAT)+WC,
+	},
+	[NFS3PROC_MKDIR] = {
+		.pc_func = (svc_procfunc) nfsd3_proc_mkdir,
+		.pc_decode = (kxdrproc_t) nfs3svc_decode_mkdirargs,
+		.pc_encode = (kxdrproc_t) nfs3svc_encode_createres,
+		.pc_release = (kxdrproc_t) nfs3svc_release_fhandle2,
+		.pc_argsize = sizeof(struct nfsd3_mkdirargs),
+		.pc_ressize = sizeof(struct nfsd3_createres),
+		.pc_cachetype = RC_REPLBUFF,
+		.pc_xdrressize = ST+(1+FH+pAT)+WC,
+	},
+	[NFS3PROC_SYMLINK] = {
+		.pc_func = (svc_procfunc) nfsd3_proc_symlink,
+		.pc_decode = (kxdrproc_t) nfs3svc_decode_symlinkargs,
+		.pc_encode = (kxdrproc_t) nfs3svc_encode_createres,
+		.pc_release = (kxdrproc_t) nfs3svc_release_fhandle2,
+		.pc_argsize = sizeof(struct nfsd3_symlinkargs),
+		.pc_ressize = sizeof(struct nfsd3_createres),
+		.pc_cachetype = RC_REPLBUFF,
+		.pc_xdrressize = ST+(1+FH+pAT)+WC,
+	},
+	[NFS3PROC_MKNOD] = {
+		.pc_func = (svc_procfunc) nfsd3_proc_mknod,
+		.pc_decode = (kxdrproc_t) nfs3svc_decode_mknodargs,
+		.pc_encode = (kxdrproc_t) nfs3svc_encode_createres,
+		.pc_release = (kxdrproc_t) nfs3svc_release_fhandle2,
+		.pc_argsize = sizeof(struct nfsd3_mknodargs),
+		.pc_ressize = sizeof(struct nfsd3_createres),
+		.pc_cachetype = RC_REPLBUFF,
+		.pc_xdrressize = ST+(1+FH+pAT)+WC,
+	},
+	[NFS3PROC_REMOVE] = {
+		.pc_func = (svc_procfunc) nfsd3_proc_remove,
+		.pc_decode = (kxdrproc_t) nfs3svc_decode_diropargs,
+		.pc_encode = (kxdrproc_t) nfs3svc_encode_wccstatres,
+		.pc_release = (kxdrproc_t) nfs3svc_release_fhandle,
+		.pc_argsize = sizeof(struct nfsd3_diropargs),
+		.pc_ressize = sizeof(struct nfsd3_wccstatres),
+		.pc_cachetype = RC_REPLBUFF,
+		.pc_xdrressize = ST+WC,
+	},
+	[NFS3PROC_RMDIR] = {
+		.pc_func = (svc_procfunc) nfsd3_proc_rmdir,
+		.pc_decode = (kxdrproc_t) nfs3svc_decode_diropargs,
+		.pc_encode = (kxdrproc_t) nfs3svc_encode_wccstatres,
+		.pc_release = (kxdrproc_t) nfs3svc_release_fhandle,
+		.pc_argsize = sizeof(struct nfsd3_diropargs),
+		.pc_ressize = sizeof(struct nfsd3_wccstatres),
+		.pc_cachetype = RC_REPLBUFF,
+		.pc_xdrressize = ST+WC,
+	},
+	[NFS3PROC_RENAME] = {
+		.pc_func = (svc_procfunc) nfsd3_proc_rename,
+		.pc_decode = (kxdrproc_t) nfs3svc_decode_renameargs,
+		.pc_encode = (kxdrproc_t) nfs3svc_encode_renameres,
+		.pc_release = (kxdrproc_t) nfs3svc_release_fhandle2,
+		.pc_argsize = sizeof(struct nfsd3_renameargs),
+		.pc_ressize = sizeof(struct nfsd3_renameres),
+		.pc_cachetype = RC_REPLBUFF,
+		.pc_xdrressize = ST+WC+WC,
+	},
+	[NFS3PROC_LINK] = {
+		.pc_func = (svc_procfunc) nfsd3_proc_link,
+		.pc_decode = (kxdrproc_t) nfs3svc_decode_linkargs,
+		.pc_encode = (kxdrproc_t) nfs3svc_encode_linkres,
+		.pc_release = (kxdrproc_t) nfs3svc_release_fhandle2,
+		.pc_argsize = sizeof(struct nfsd3_linkargs),
+		.pc_ressize = sizeof(struct nfsd3_linkres),
+		.pc_cachetype = RC_REPLBUFF,
+		.pc_xdrressize = ST+pAT+WC,
+	},
+	[NFS3PROC_READDIR] = {
+		.pc_func = (svc_procfunc) nfsd3_proc_readdir,
+		.pc_decode = (kxdrproc_t) nfs3svc_decode_readdirargs,
+		.pc_encode = (kxdrproc_t) nfs3svc_encode_readdirres,
+		.pc_release = (kxdrproc_t) nfs3svc_release_fhandle,
+		.pc_argsize = sizeof(struct nfsd3_readdirargs),
+		.pc_ressize = sizeof(struct nfsd3_readdirres),
+		.pc_cachetype = RC_NOCACHE,
+	},
+	[NFS3PROC_READDIRPLUS] = {
+		.pc_func = (svc_procfunc) nfsd3_proc_readdirplus,
+		.pc_decode = (kxdrproc_t) nfs3svc_decode_readdirplusargs,
+		.pc_encode = (kxdrproc_t) nfs3svc_encode_readdirres,
+		.pc_release = (kxdrproc_t) nfs3svc_release_fhandle,
+		.pc_argsize = sizeof(struct nfsd3_readdirplusargs),
+		.pc_ressize = sizeof(struct nfsd3_readdirres),
+		.pc_cachetype = RC_NOCACHE,
+	},
+	[NFS3PROC_FSSTAT] = {
+		.pc_func = (svc_procfunc) nfsd3_proc_fsstat,
+		.pc_decode = (kxdrproc_t) nfs3svc_decode_fhandleargs,
+		.pc_encode = (kxdrproc_t) nfs3svc_encode_fsstatres,
+		.pc_argsize = sizeof(struct nfsd3_fhandleargs),
+		.pc_ressize = sizeof(struct nfsd3_fsstatres),
+		.pc_cachetype = RC_NOCACHE,
+		.pc_xdrressize = ST+pAT+2*6+1,
+	},
+	[NFS3PROC_FSINFO] = {
+		.pc_func = (svc_procfunc) nfsd3_proc_fsinfo,
+		.pc_decode = (kxdrproc_t) nfs3svc_decode_fhandleargs,
+		.pc_encode = (kxdrproc_t) nfs3svc_encode_fsinfores,
+		.pc_argsize = sizeof(struct nfsd3_fhandleargs),
+		.pc_ressize = sizeof(struct nfsd3_fsinfores),
+		.pc_cachetype = RC_NOCACHE,
+		.pc_xdrressize = ST+pAT+12,
+	},
+	[NFS3PROC_PATHCONF] = {
+		.pc_func = (svc_procfunc) nfsd3_proc_pathconf,
+		.pc_decode = (kxdrproc_t) nfs3svc_decode_fhandleargs,
+		.pc_encode = (kxdrproc_t) nfs3svc_encode_pathconfres,
+		.pc_argsize = sizeof(struct nfsd3_fhandleargs),
+		.pc_ressize = sizeof(struct nfsd3_pathconfres),
+		.pc_cachetype = RC_NOCACHE,
+		.pc_xdrressize = ST+pAT+6,
+	},
+	[NFS3PROC_COMMIT] = {
+		.pc_func = (svc_procfunc) nfsd3_proc_commit,
+		.pc_decode = (kxdrproc_t) nfs3svc_decode_commitargs,
+		.pc_encode = (kxdrproc_t) nfs3svc_encode_commitres,
+		.pc_release = (kxdrproc_t) nfs3svc_release_fhandle,
+		.pc_argsize = sizeof(struct nfsd3_commitargs),
+		.pc_ressize = sizeof(struct nfsd3_commitres),
+		.pc_cachetype = RC_NOCACHE,
+		.pc_xdrressize = ST+WC+2,
+	},
 };
 
 struct svc_version	nfsd_version3 = {
diff --git a/fs/nfsd/nfs3xdr.c b/fs/nfsd/nfs3xdr.c
index 17d0dd99720..01d4ec1c88e 100644
--- a/fs/nfsd/nfs3xdr.c
+++ b/fs/nfsd/nfs3xdr.c
@@ -272,6 +272,7 @@ void fill_post_wcc(struct svc_fh *fhp)
 
 	err = vfs_getattr(fhp->fh_export->ex_path.mnt, fhp->fh_dentry,
 			&fhp->fh_post_attr);
+	fhp->fh_post_change = fhp->fh_dentry->d_inode->i_version;
 	if (err)
 		fhp->fh_post_saved = 0;
 	else
diff --git a/fs/nfsd/nfs4callback.c b/fs/nfsd/nfs4callback.c
index 290289bd44f..3fd23f7acec 100644
--- a/fs/nfsd/nfs4callback.c
+++ b/fs/nfsd/nfs4callback.c
@@ -140,8 +140,10 @@ struct nfs4_cb_compound_hdr {
 	int		status;
 	u32		ident;
 	u32		nops;
+	__be32		*nops_p;
+	u32		minorversion;
 	u32		taglen;
-	char *		tag;
+	char		*tag;
 };
 
 static struct {
@@ -201,33 +203,39 @@ nfs_cb_stat_to_errno(int stat)
  * XDR encode
  */
 
-static int
+static void
 encode_cb_compound_hdr(struct xdr_stream *xdr, struct nfs4_cb_compound_hdr *hdr)
 {
 	__be32 * p;
 
 	RESERVE_SPACE(16);
 	WRITE32(0);            /* tag length is always 0 */
-	WRITE32(NFS4_MINOR_VERSION);
+	WRITE32(hdr->minorversion);
 	WRITE32(hdr->ident);
+	hdr->nops_p = p;
 	WRITE32(hdr->nops);
-	return 0;
 }
 
-static int
-encode_cb_recall(struct xdr_stream *xdr, struct nfs4_cb_recall *cb_rec)
+static void encode_cb_nops(struct nfs4_cb_compound_hdr *hdr)
+{
+	*hdr->nops_p = htonl(hdr->nops);
+}
+
+static void
+encode_cb_recall(struct xdr_stream *xdr, struct nfs4_delegation *dp,
+		struct nfs4_cb_compound_hdr *hdr)
 {
 	__be32 *p;
-	int len = cb_rec->cbr_fh.fh_size;
+	int len = dp->dl_fh.fh_size;
 
-	RESERVE_SPACE(12+sizeof(cb_rec->cbr_stateid) + len);
+	RESERVE_SPACE(12+sizeof(dp->dl_stateid) + len);
 	WRITE32(OP_CB_RECALL);
-	WRITE32(cb_rec->cbr_stateid.si_generation);
-	WRITEMEM(&cb_rec->cbr_stateid.si_opaque, sizeof(stateid_opaque_t));
-	WRITE32(cb_rec->cbr_trunc);
+	WRITE32(dp->dl_stateid.si_generation);
+	WRITEMEM(&dp->dl_stateid.si_opaque, sizeof(stateid_opaque_t));
+	WRITE32(0); /* truncate optimization not implemented */
 	WRITE32(len);
-	WRITEMEM(&cb_rec->cbr_fh.fh_base, len);
-	return 0;
+	WRITEMEM(&dp->dl_fh.fh_base, len);
+	hdr->nops++;
 }
 
 static int
@@ -241,17 +249,18 @@ nfs4_xdr_enc_cb_null(struct rpc_rqst *req, __be32 *p)
 }
 
 static int
-nfs4_xdr_enc_cb_recall(struct rpc_rqst *req, __be32 *p, struct nfs4_cb_recall *args)
+nfs4_xdr_enc_cb_recall(struct rpc_rqst *req, __be32 *p, struct nfs4_delegation *args)
 {
 	struct xdr_stream xdr;
 	struct nfs4_cb_compound_hdr hdr = {
-		.ident = args->cbr_ident,
-		.nops   = 1,
+		.ident = args->dl_ident,
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
 	encode_cb_compound_hdr(&xdr, &hdr);
-	return (encode_cb_recall(&xdr, args));
+	encode_cb_recall(&xdr, args, &hdr);
+	encode_cb_nops(&hdr);
+	return 0;
 }
 
 
@@ -358,18 +367,21 @@ static struct rpc_program cb_program = {
 		.pipe_dir_name  = "/nfsd4_cb",
 };
 
+static int max_cb_time(void)
+{
+	return max(NFSD_LEASE_TIME/10, (time_t)1) * HZ;
+}
+
 /* Reference counting, callback cleanup, etc., all look racy as heck.
  * And why is cb_set an atomic? */
 
-static struct rpc_clnt *setup_callback_client(struct nfs4_client *clp)
+int setup_callback_client(struct nfs4_client *clp)
 {
 	struct sockaddr_in	addr;
-	struct nfs4_callback    *cb = &clp->cl_callback;
+	struct nfs4_cb_conn *cb = &clp->cl_cb_conn;
 	struct rpc_timeout	timeparms = {
-		.to_initval	= (NFSD_LEASE_TIME/4) * HZ,
-		.to_retries	= 5,
-		.to_maxval	= (NFSD_LEASE_TIME/2) * HZ,
-		.to_exponential	= 1,
+		.to_initval	= max_cb_time(),
+		.to_retries	= 0,
 	};
 	struct rpc_create_args args = {
 		.protocol	= IPPROTO_TCP,
@@ -386,7 +398,7 @@ static struct rpc_clnt *setup_callback_client(struct nfs4_client *clp)
 	struct rpc_clnt *client;
 
 	if (!clp->cl_principal && (clp->cl_flavor >= RPC_AUTH_GSS_KRB5))
-		return ERR_PTR(-EINVAL);
+		return -EINVAL;
 
 	/* Initialize address */
 	memset(&addr, 0, sizeof(addr));
@@ -396,48 +408,77 @@ static struct rpc_clnt *setup_callback_client(struct nfs4_client *clp)
 
 	/* Create RPC client */
 	client = rpc_create(&args);
-	if (IS_ERR(client))
+	if (IS_ERR(client)) {
 		dprintk("NFSD: couldn't create callback client: %ld\n",
 			PTR_ERR(client));
-	return client;
+		return PTR_ERR(client);
+	}
+	cb->cb_client = client;
+	return 0;
+
+}
+
+static void warn_no_callback_path(struct nfs4_client *clp, int reason)
+{
+	dprintk("NFSD: warning: no callback path to client %.*s: error %d\n",
+		(int)clp->cl_name.len, clp->cl_name.data, reason);
+}
+
+static void nfsd4_cb_probe_done(struct rpc_task *task, void *calldata)
+{
+	struct nfs4_client *clp = calldata;
+
+	if (task->tk_status)
+		warn_no_callback_path(clp, task->tk_status);
+	else
+		atomic_set(&clp->cl_cb_conn.cb_set, 1);
+	put_nfs4_client(clp);
+}
+
+static const struct rpc_call_ops nfsd4_cb_probe_ops = {
+	.rpc_call_done = nfsd4_cb_probe_done,
+};
 
+static struct rpc_cred *lookup_cb_cred(struct nfs4_cb_conn *cb)
+{
+	struct auth_cred acred = {
+		.machine_cred = 1
+	};
+
+	/*
+	 * Note in the gss case this doesn't actually have to wait for a
+	 * gss upcall (or any calls to the client); this just creates a
+	 * non-uptodate cred which the rpc state machine will fill in with
+	 * a refresh_upcall later.
+	 */
+	return rpcauth_lookup_credcache(cb->cb_client->cl_auth, &acred,
+							RPCAUTH_LOOKUP_NEW);
 }
 
-static int do_probe_callback(void *data)
+void do_probe_callback(struct nfs4_client *clp)
 {
-	struct nfs4_client *clp = data;
-	struct nfs4_callback    *cb = &clp->cl_callback;
+	struct nfs4_cb_conn *cb = &clp->cl_cb_conn;
 	struct rpc_message msg = {
 		.rpc_proc       = &nfs4_cb_procedures[NFSPROC4_CLNT_CB_NULL],
 		.rpc_argp       = clp,
 	};
-	struct rpc_clnt *client;
+	struct rpc_cred *cred;
 	int status;
 
-	client = setup_callback_client(clp);
-	if (IS_ERR(client)) {
-		status = PTR_ERR(client);
-		dprintk("NFSD: couldn't create callback client: %d\n",
-								status);
-		goto out_err;
+	cred = lookup_cb_cred(cb);
+	if (IS_ERR(cred)) {
+		status = PTR_ERR(cred);
+		goto out;
+	}
+	cb->cb_cred = cred;
+	msg.rpc_cred = cb->cb_cred;
+	status = rpc_call_async(cb->cb_client, &msg, RPC_TASK_SOFT,
+				&nfsd4_cb_probe_ops, (void *)clp);
+out:
+	if (status) {
+		warn_no_callback_path(clp, status);
+		put_nfs4_client(clp);
 	}
-
-	status = rpc_call_sync(client, &msg, RPC_TASK_SOFT);
-
-	if (status)
-		goto out_release_client;
-
-	cb->cb_client = client;
-	atomic_set(&cb->cb_set, 1);
-	put_nfs4_client(clp);
-	return 0;
-out_release_client:
-	rpc_shutdown_client(client);
-out_err:
-	dprintk("NFSD: warning: no callback path to client %.*s: error %d\n",
-		(int)clp->cl_name.len, clp->cl_name.data, status);
-	put_nfs4_client(clp);
-	return 0;
 }
 
 /*
@@ -446,21 +487,65 @@ out_err:
 void
 nfsd4_probe_callback(struct nfs4_client *clp)
 {
-	struct task_struct *t;
+	int status;
 
-	BUG_ON(atomic_read(&clp->cl_callback.cb_set));
+	BUG_ON(atomic_read(&clp->cl_cb_conn.cb_set));
+
+	status = setup_callback_client(clp);
+	if (status) {
+		warn_no_callback_path(clp, status);
+		return;
+	}
 
 	/* the task holds a reference to the nfs4_client struct */
 	atomic_inc(&clp->cl_count);
 
-	t = kthread_run(do_probe_callback, clp, "nfs4_cb_probe");
+	do_probe_callback(clp);
+}
 
-	if (IS_ERR(t))
-		atomic_dec(&clp->cl_count);
+static void nfsd4_cb_recall_done(struct rpc_task *task, void *calldata)
+{
+	struct nfs4_delegation *dp = calldata;
+	struct nfs4_client *clp = dp->dl_client;
 
-	return;
+	switch (task->tk_status) {
+	case -EIO:
+		/* Network partition? */
+		atomic_set(&clp->cl_cb_conn.cb_set, 0);
+		warn_no_callback_path(clp, task->tk_status);
+	case -EBADHANDLE:
+	case -NFS4ERR_BAD_STATEID:
+		/* Race: client probably got cb_recall
+		 * before open reply granting delegation */
+		break;
+	default:
+		/* success, or error we can't handle */
+		return;
+	}
+	if (dp->dl_retries--) {
+		rpc_delay(task, 2*HZ);
+		task->tk_status = 0;
+		rpc_restart_call(task);
+	} else {
+		atomic_set(&clp->cl_cb_conn.cb_set, 0);
+		warn_no_callback_path(clp, task->tk_status);
+	}
+}
+
+static void nfsd4_cb_recall_release(void *calldata)
+{
+	struct nfs4_delegation *dp = calldata;
+	struct nfs4_client *clp = dp->dl_client;
+
+	nfs4_put_delegation(dp);
+	put_nfs4_client(clp);
 }
 
+static const struct rpc_call_ops nfsd4_cb_recall_ops = {
+	.rpc_call_done = nfsd4_cb_recall_done,
+	.rpc_release = nfsd4_cb_recall_release,
+};
+
 /*
  * called with dp->dl_count inc'ed.
  */
@@ -468,41 +553,19 @@ void
 nfsd4_cb_recall(struct nfs4_delegation *dp)
 {
 	struct nfs4_client *clp = dp->dl_client;
-	struct rpc_clnt *clnt = clp->cl_callback.cb_client;
-	struct nfs4_cb_recall *cbr = &dp->dl_recall;
+	struct rpc_clnt *clnt = clp->cl_cb_conn.cb_client;
 	struct rpc_message msg = {
 		.rpc_proc = &nfs4_cb_procedures[NFSPROC4_CLNT_CB_RECALL],
-		.rpc_argp = cbr,
+		.rpc_argp = dp,
+		.rpc_cred = clp->cl_cb_conn.cb_cred
 	};
-	int retries = 1;
-	int status = 0;
-
-	cbr->cbr_trunc = 0; /* XXX need to implement truncate optimization */
-	cbr->cbr_dp = dp;
-
-	status = rpc_call_sync(clnt, &msg, RPC_TASK_SOFT);
-	while (retries--) {
-		switch (status) {
-			case -EIO:
-				/* Network partition? */
-				atomic_set(&clp->cl_callback.cb_set, 0);
-			case -EBADHANDLE:
-			case -NFS4ERR_BAD_STATEID:
-				/* Race: client probably got cb_recall
-				 * before open reply granting delegation */
-				break;
-			default:
-				goto out_put_cred;
-		}
-		ssleep(2);
-		status = rpc_call_sync(clnt, &msg, RPC_TASK_SOFT);
+	int status;
+
+	dp->dl_retries = 1;
+	status = rpc_call_async(clnt, &msg, RPC_TASK_SOFT,
+				&nfsd4_cb_recall_ops, dp);
+	if (status) {
+		put_nfs4_client(clp);
+		nfs4_put_delegation(dp);
 	}
-out_put_cred:
-	/*
-	 * Success or failure, now we're either waiting for lease expiration
-	 * or deleg_return.
-	 */
-	put_nfs4_client(clp);
-	nfs4_put_delegation(dp);
-	return;
 }
diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c
index b2883e9c638..7c8801769a3 100644
--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -51,6 +51,78 @@
 
 #define NFSDDBG_FACILITY		NFSDDBG_PROC
 
+static u32 nfsd_attrmask[] = {
+	NFSD_WRITEABLE_ATTRS_WORD0,
+	NFSD_WRITEABLE_ATTRS_WORD1,
+	NFSD_WRITEABLE_ATTRS_WORD2
+};
+
+static u32 nfsd41_ex_attrmask[] = {
+	NFSD_SUPPATTR_EXCLCREAT_WORD0,
+	NFSD_SUPPATTR_EXCLCREAT_WORD1,
+	NFSD_SUPPATTR_EXCLCREAT_WORD2
+};
+
+static __be32
+check_attr_support(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+		   u32 *bmval, u32 *writable)
+{
+	struct dentry *dentry = cstate->current_fh.fh_dentry;
+	struct svc_export *exp = cstate->current_fh.fh_export;
+
+	/*
+	 * Check about attributes are supported by the NFSv4 server or not.
+	 * According to spec, unsupported attributes return ERR_ATTRNOTSUPP.
+	 */
+	if ((bmval[0] & ~nfsd_suppattrs0(cstate->minorversion)) ||
+	    (bmval[1] & ~nfsd_suppattrs1(cstate->minorversion)) ||
+	    (bmval[2] & ~nfsd_suppattrs2(cstate->minorversion)))
+		return nfserr_attrnotsupp;
+
+	/*
+	 * Check FATTR4_WORD0_ACL & FATTR4_WORD0_FS_LOCATIONS can be supported
+	 * in current environment or not.
+	 */
+	if (bmval[0] & FATTR4_WORD0_ACL) {
+		if (!IS_POSIXACL(dentry->d_inode))
+			return nfserr_attrnotsupp;
+	}
+	if (bmval[0] & FATTR4_WORD0_FS_LOCATIONS) {
+		if (exp->ex_fslocs.locations == NULL)
+			return nfserr_attrnotsupp;
+	}
+
+	/*
+	 * According to spec, read-only attributes return ERR_INVAL.
+	 */
+	if (writable) {
+		if ((bmval[0] & ~writable[0]) || (bmval[1] & ~writable[1]) ||
+		    (bmval[2] & ~writable[2]))
+			return nfserr_inval;
+	}
+
+	return nfs_ok;
+}
+
+static __be32
+nfsd4_check_open_attributes(struct svc_rqst *rqstp,
+	struct nfsd4_compound_state *cstate, struct nfsd4_open *open)
+{
+	__be32 status = nfs_ok;
+
+	if (open->op_create == NFS4_OPEN_CREATE) {
+		if (open->op_createmode == NFS4_CREATE_UNCHECKED
+		    || open->op_createmode == NFS4_CREATE_GUARDED)
+			status = check_attr_support(rqstp, cstate,
+					open->op_bmval, nfsd_attrmask);
+		else if (open->op_createmode == NFS4_CREATE_EXCLUSIVE4_1)
+			status = check_attr_support(rqstp, cstate,
+					open->op_bmval, nfsd41_ex_attrmask);
+	}
+
+	return status;
+}
+
 static inline void
 fh_dup2(struct svc_fh *dst, struct svc_fh *src)
 {
@@ -225,6 +297,10 @@ nfsd4_open(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
 	if (status)
 		goto out;
 
+	status = nfsd4_check_open_attributes(rqstp, cstate, open);
+	if (status)
+		goto out;
+
 	/* Openowner is now set, so sequence id will get bumped.  Now we need
 	 * these checks before we do any creates: */
 	status = nfserr_grace;
@@ -395,6 +471,11 @@ nfsd4_create(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
 	if (status)
 		return status;
 
+	status = check_attr_support(rqstp, cstate, create->cr_bmval,
+				    nfsd_attrmask);
+	if (status)
+		return status;
+
 	switch (create->cr_type) {
 	case NF4LNK:
 		/* ugh! we have to null-terminate the linktext, or
@@ -689,6 +770,12 @@ nfsd4_setattr(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
 	if (status)
 		return status;
 	status = nfs_ok;
+
+	status = check_attr_support(rqstp, cstate, setattr->sa_bmval,
+				    nfsd_attrmask);
+	if (status)
+		goto out;
+
 	if (setattr->sa_acl != NULL)
 		status = nfsd4_set_nfs4_acl(rqstp, &cstate->current_fh,
 					    setattr->sa_acl);
@@ -763,10 +850,10 @@ _nfsd4_verify(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
 	if (status)
 		return status;
 
-	if ((verify->ve_bmval[0] & ~nfsd_suppattrs0(cstate->minorversion))
-	    || (verify->ve_bmval[1] & ~nfsd_suppattrs1(cstate->minorversion))
-	    || (verify->ve_bmval[2] & ~nfsd_suppattrs2(cstate->minorversion)))
-		return nfserr_attrnotsupp;
+	status = check_attr_support(rqstp, cstate, verify->ve_bmval, NULL);
+	if (status)
+		return status;
+
 	if ((verify->ve_bmval[0] & FATTR4_WORD0_RDATTR_ERROR)
 	    || (verify->ve_bmval[1] & NFSD_WRITEONLY_ATTRS_WORD1))
 		return nfserr_inval;
@@ -1226,24 +1313,9 @@ static const char *nfsd4_op_name(unsigned opnum)
 	return "unknown_operation";
 }
 
-#define nfs4svc_decode_voidargs		NULL
-#define nfs4svc_release_void		NULL
 #define nfsd4_voidres			nfsd4_voidargs
-#define nfs4svc_release_compound	NULL
 struct nfsd4_voidargs { int dummy; };
 
-#define PROC(name, argt, rest, relt, cache, respsize)	\
- { (svc_procfunc) nfsd4_proc_##name,		\
-   (kxdrproc_t) nfs4svc_decode_##argt##args,	\
-   (kxdrproc_t) nfs4svc_encode_##rest##res,	\
-   (kxdrproc_t) nfs4svc_release_##relt,		\
-   sizeof(struct nfsd4_##argt##args),		\
-   sizeof(struct nfsd4_##rest##res),		\
-   0,						\
-   cache,					\
-   respsize,					\
- }
-
 /*
  * TODO: At the present time, the NFSv4 server does not do XID caching
  * of requests.  Implementing XID caching would not be a serious problem,
@@ -1255,8 +1327,23 @@ struct nfsd4_voidargs { int dummy; };
  * better XID's.
  */
 static struct svc_procedure		nfsd_procedures4[2] = {
-  PROC(null,	 void,		void,		void,	  RC_NOCACHE, 1),
-  PROC(compound, compound,	compound,	compound, RC_NOCACHE, NFSD_BUFSIZE/4)
+	[NFSPROC4_NULL] = {
+		.pc_func = (svc_procfunc) nfsd4_proc_null,
+		.pc_encode = (kxdrproc_t) nfs4svc_encode_voidres,
+		.pc_argsize = sizeof(struct nfsd4_voidargs),
+		.pc_ressize = sizeof(struct nfsd4_voidres),
+		.pc_cachetype = RC_NOCACHE,
+		.pc_xdrressize = 1,
+	},
+	[NFSPROC4_COMPOUND] = {
+		.pc_func = (svc_procfunc) nfsd4_proc_compound,
+		.pc_decode = (kxdrproc_t) nfs4svc_decode_compoundargs,
+		.pc_encode = (kxdrproc_t) nfs4svc_encode_compoundres,
+		.pc_argsize = sizeof(struct nfsd4_compoundargs),
+		.pc_ressize = sizeof(struct nfsd4_compoundres),
+		.pc_cachetype = RC_NOCACHE,
+		.pc_xdrressize = NFSD_BUFSIZE/4,
+	},
 };
 
 struct svc_version	nfsd_version4 = {
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 3b711f5147a..980a216a48c 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -182,7 +182,7 @@ alloc_init_deleg(struct nfs4_client *clp, struct nfs4_stateid *stp, struct svc_f
 {
 	struct nfs4_delegation *dp;
 	struct nfs4_file *fp = stp->st_file;
-	struct nfs4_callback *cb = &stp->st_stateowner->so_client->cl_callback;
+	struct nfs4_cb_conn *cb = &stp->st_stateowner->so_client->cl_cb_conn;
 
 	dprintk("NFSD alloc_init_deleg\n");
 	if (fp->fi_had_conflict)
@@ -203,10 +203,8 @@ alloc_init_deleg(struct nfs4_client *clp, struct nfs4_stateid *stp, struct svc_f
 	get_file(stp->st_vfs_file);
 	dp->dl_vfs_file = stp->st_vfs_file;
 	dp->dl_type = type;
-	dp->dl_recall.cbr_dp = NULL;
-	dp->dl_recall.cbr_ident = cb->cb_ident;
-	dp->dl_recall.cbr_trunc = 0;
-	dp->dl_stateid.si_boot = boot_time;
+	dp->dl_ident = cb->cb_ident;
+	dp->dl_stateid.si_boot = get_seconds();
 	dp->dl_stateid.si_stateownerid = current_delegid++;
 	dp->dl_stateid.si_fileid = 0;
 	dp->dl_stateid.si_generation = 0;
@@ -427,6 +425,11 @@ static int set_forechannel_maxreqs(struct nfsd4_channel_attrs *fchan)
 {
 	int status = 0, np = fchan->maxreqs * NFSD_PAGES_PER_SLOT;
 
+	if (fchan->maxreqs < 1)
+		return nfserr_inval;
+	else if (fchan->maxreqs > NFSD_MAX_SLOTS_PER_SESSION)
+		fchan->maxreqs = NFSD_MAX_SLOTS_PER_SESSION;
+
 	spin_lock(&nfsd_serv->sv_lock);
 	if (np + nfsd_serv->sv_drc_pages_used > nfsd_serv->sv_drc_max_pages)
 		np = nfsd_serv->sv_drc_max_pages - nfsd_serv->sv_drc_pages_used;
@@ -446,8 +449,8 @@ static int set_forechannel_maxreqs(struct nfsd4_channel_attrs *fchan)
  * fchan holds the client values on input, and the server values on output
  */
 static int init_forechannel_attrs(struct svc_rqst *rqstp,
-				    struct nfsd4_session *session,
-				    struct nfsd4_channel_attrs *fchan)
+				  struct nfsd4_channel_attrs *session_fchan,
+				  struct nfsd4_channel_attrs *fchan)
 {
 	int status = 0;
 	__u32   maxcount = svc_max_payload(rqstp);
@@ -457,21 +460,21 @@ static int init_forechannel_attrs(struct svc_rqst *rqstp,
 	/* Use the client's max request and max response size if possible */
 	if (fchan->maxreq_sz > maxcount)
 		fchan->maxreq_sz = maxcount;
-	session->se_fmaxreq_sz = fchan->maxreq_sz;
+	session_fchan->maxreq_sz = fchan->maxreq_sz;
 
 	if (fchan->maxresp_sz > maxcount)
 		fchan->maxresp_sz = maxcount;
-	session->se_fmaxresp_sz = fchan->maxresp_sz;
+	session_fchan->maxresp_sz = fchan->maxresp_sz;
 
 	/* Set the max response cached size our default which is
 	 * a multiple of PAGE_SIZE and small */
-	session->se_fmaxresp_cached = NFSD_PAGES_PER_SLOT * PAGE_SIZE;
-	fchan->maxresp_cached = session->se_fmaxresp_cached;
+	session_fchan->maxresp_cached = NFSD_PAGES_PER_SLOT * PAGE_SIZE;
+	fchan->maxresp_cached = session_fchan->maxresp_cached;
 
 	/* Use the client's maxops if possible */
 	if (fchan->maxops > NFSD_MAX_OPS_PER_COMPOUND)
 		fchan->maxops = NFSD_MAX_OPS_PER_COMPOUND;
-	session->se_fmaxops = fchan->maxops;
+	session_fchan->maxops = fchan->maxops;
 
 	/* try to use the client requested number of slots */
 	if (fchan->maxreqs > NFSD_MAX_SLOTS_PER_SESSION)
@@ -483,7 +486,7 @@ static int init_forechannel_attrs(struct svc_rqst *rqstp,
 	 */
 	status = set_forechannel_maxreqs(fchan);
 
-	session->se_fnumslots = fchan->maxreqs;
+	session_fchan->maxreqs = fchan->maxreqs;
 	return status;
 }
 
@@ -497,12 +500,14 @@ alloc_init_session(struct svc_rqst *rqstp, struct nfs4_client *clp,
 	memset(&tmp, 0, sizeof(tmp));
 
 	/* FIXME: For now, we just accept the client back channel attributes. */
-	status = init_forechannel_attrs(rqstp, &tmp, &cses->fore_channel);
+	tmp.se_bchannel = cses->back_channel;
+	status = init_forechannel_attrs(rqstp, &tmp.se_fchannel,
+					&cses->fore_channel);
 	if (status)
 		goto out;
 
 	/* allocate struct nfsd4_session and slot table in one piece */
-	slotsize = tmp.se_fnumslots * sizeof(struct nfsd4_slot);
+	slotsize = tmp.se_fchannel.maxreqs * sizeof(struct nfsd4_slot);
 	new = kzalloc(sizeof(*new) + slotsize, GFP_KERNEL);
 	if (!new)
 		goto out;
@@ -576,7 +581,7 @@ free_session(struct kref *kref)
 	int i;
 
 	ses = container_of(kref, struct nfsd4_session, se_ref);
-	for (i = 0; i < ses->se_fnumslots; i++) {
+	for (i = 0; i < ses->se_fchannel.maxreqs; i++) {
 		struct nfsd4_cache_entry *e = &ses->se_slots[i].sl_cache_entry;
 		nfsd4_release_respages(e->ce_respages, e->ce_resused);
 	}
@@ -632,16 +637,20 @@ static struct nfs4_client *alloc_client(struct xdr_netobj name)
 static void
 shutdown_callback_client(struct nfs4_client *clp)
 {
-	struct rpc_clnt *clnt = clp->cl_callback.cb_client;
+	struct rpc_clnt *clnt = clp->cl_cb_conn.cb_client;
 
 	if (clnt) {
 		/*
 		 * Callback threads take a reference on the client, so there
 		 * should be no outstanding callbacks at this point.
 		 */
-		clp->cl_callback.cb_client = NULL;
+		clp->cl_cb_conn.cb_client = NULL;
 		rpc_shutdown_client(clnt);
 	}
+	if (clp->cl_cb_conn.cb_cred) {
+		put_rpccred(clp->cl_cb_conn.cb_cred);
+		clp->cl_cb_conn.cb_cred = NULL;
+	}
 }
 
 static inline void
@@ -714,7 +723,7 @@ static struct nfs4_client *create_client(struct xdr_netobj name, char *recdir)
 		return NULL;
 	memcpy(clp->cl_recdir, recdir, HEXDIR_LEN);
 	atomic_set(&clp->cl_count, 1);
-	atomic_set(&clp->cl_callback.cb_set, 0);
+	atomic_set(&clp->cl_cb_conn.cb_set, 0);
 	INIT_LIST_HEAD(&clp->cl_idhash);
 	INIT_LIST_HEAD(&clp->cl_strhash);
 	INIT_LIST_HEAD(&clp->cl_openowners);
@@ -966,7 +975,7 @@ parse_ipv4(unsigned int addr_len, char *addr_val, unsigned int *cbaddrp, unsigne
 static void
 gen_callback(struct nfs4_client *clp, struct nfsd4_setclientid *se)
 {
-	struct nfs4_callback *cb = &clp->cl_callback;
+	struct nfs4_cb_conn *cb = &clp->cl_cb_conn;
 
 	/* Currently, we only support tcp for the callback channel */
 	if ((se->se_callback_netid_len != 3) || memcmp((char *)se->se_callback_netid_val, "tcp", 3))
@@ -975,6 +984,7 @@ gen_callback(struct nfs4_client *clp, struct nfsd4_setclientid *se)
 	if ( !(parse_ipv4(se->se_callback_addr_len, se->se_callback_addr_val,
 	                 &cb->cb_addr, &cb->cb_port)))
 		goto out_err;
+	cb->cb_minorversion = 0;
 	cb->cb_prog = se->se_callback_prog;
 	cb->cb_ident = se->se_callback_ident;
 	return;
@@ -1128,7 +1138,7 @@ nfsd4_replay_cache_entry(struct nfsd4_compoundres *resp,
 	 * is sent (lease renewal).
 	 */
 	if (seq && nfsd4_not_cached(resp)) {
-		seq->maxslots = resp->cstate.session->se_fnumslots;
+		seq->maxslots = resp->cstate.session->se_fchannel.maxreqs;
 		return nfs_ok;
 	}
 
@@ -1238,12 +1248,6 @@ nfsd4_exchange_id(struct svc_rqst *rqstp,
 			expire_client(conf);
 			goto out_new;
 		}
-		if (ip_addr != conf->cl_addr &&
-		    !(exid->flags & EXCHGID4_FLAG_UPD_CONFIRMED_REC_A)) {
-			/* Client collision. 18.35.4 case 3 */
-			status = nfserr_clid_inuse;
-			goto out;
-		}
 		/*
 		 * Set bit when the owner id and verifier map to an already
 		 * confirmed client id (18.35.3).
@@ -1257,12 +1261,12 @@ nfsd4_exchange_id(struct svc_rqst *rqstp,
 		copy_verf(conf, &verf);
 		new = conf;
 		goto out_copy;
-	} else {
-		/* 18.35.4 case 7 */
-		if (exid->flags & EXCHGID4_FLAG_UPD_CONFIRMED_REC_A) {
-			status = nfserr_noent;
-			goto out;
-		}
+	}
+
+	/* 18.35.4 case 7 */
+	if (exid->flags & EXCHGID4_FLAG_UPD_CONFIRMED_REC_A) {
+		status = nfserr_noent;
+		goto out;
 	}
 
 	unconf  = find_unconfirmed_client_by_str(dname, strhashval, true);
@@ -1471,7 +1475,7 @@ nfsd4_sequence(struct svc_rqst *rqstp,
 		goto out;
 
 	status = nfserr_badslot;
-	if (seq->slotid >= session->se_fnumslots)
+	if (seq->slotid >= session->se_fchannel.maxreqs)
 		goto out;
 
 	slot = &session->se_slots[seq->slotid];
@@ -1686,9 +1690,7 @@ nfsd4_setclientid_confirm(struct svc_rqst *rqstp,
 		else {
 			/* XXX: We just turn off callbacks until we can handle
 			  * change request correctly. */
-			atomic_set(&conf->cl_callback.cb_set, 0);
-			gen_confirm(conf);
-			nfsd4_remove_clid_dir(unconf);
+			atomic_set(&conf->cl_cb_conn.cb_set, 0);
 			expire_client(unconf);
 			status = nfs_ok;
 
@@ -1882,7 +1884,7 @@ init_stateid(struct nfs4_stateid *stp, struct nfs4_file *fp, struct nfsd4_open *
 	stp->st_stateowner = sop;
 	get_nfs4_file(fp);
 	stp->st_file = fp;
-	stp->st_stateid.si_boot = boot_time;
+	stp->st_stateid.si_boot = get_seconds();
 	stp->st_stateid.si_stateownerid = sop->so_id;
 	stp->st_stateid.si_fileid = fp->fi_id;
 	stp->st_stateid.si_generation = 0;
@@ -2059,19 +2061,6 @@ nfs4_file_downgrade(struct file *filp, unsigned int share_access)
 }
 
 /*
- * Recall a delegation
- */
-static int
-do_recall(void *__dp)
-{
-	struct nfs4_delegation *dp = __dp;
-
-	dp->dl_file->fi_had_conflict = true;
-	nfsd4_cb_recall(dp);
-	return 0;
-}
-
-/*
  * Spawn a thread to perform a recall on the delegation represented
  * by the lease (file_lock)
  *
@@ -2082,8 +2071,7 @@ do_recall(void *__dp)
 static
 void nfsd_break_deleg_cb(struct file_lock *fl)
 {
-	struct nfs4_delegation *dp=  (struct nfs4_delegation *)fl->fl_owner;
-	struct task_struct *t;
+	struct nfs4_delegation *dp = (struct nfs4_delegation *)fl->fl_owner;
 
 	dprintk("NFSD nfsd_break_deleg_cb: dp %p fl %p\n",dp,fl);
 	if (!dp)
@@ -2111,16 +2099,8 @@ void nfsd_break_deleg_cb(struct file_lock *fl)
 	 */
 	fl->fl_break_time = 0;
 
-	t = kthread_run(do_recall, dp, "%s", "nfs4_cb_recall");
-	if (IS_ERR(t)) {
-		struct nfs4_client *clp = dp->dl_client;
-
-		printk(KERN_INFO "NFSD: Callback thread failed for "
-			"for client (clientid %08x/%08x)\n",
-			clp->cl_clientid.cl_boot, clp->cl_clientid.cl_id);
-		put_nfs4_client(dp->dl_client);
-		nfs4_put_delegation(dp);
-	}
+	dp->dl_file->fi_had_conflict = true;
+	nfsd4_cb_recall(dp);
 }
 
 /*
@@ -2422,7 +2402,7 @@ nfs4_open_delegation(struct svc_fh *fh, struct nfsd4_open *open, struct nfs4_sta
 {
 	struct nfs4_delegation *dp;
 	struct nfs4_stateowner *sop = stp->st_stateowner;
-	struct nfs4_callback *cb = &sop->so_client->cl_callback;
+	struct nfs4_cb_conn *cb = &sop->so_client->cl_cb_conn;
 	struct file_lock fl, *flp = &fl;
 	int status, flag = 0;
 
@@ -2614,7 +2594,7 @@ nfsd4_renew(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
 	renew_client(clp);
 	status = nfserr_cb_path_down;
 	if (!list_empty(&clp->cl_delegations)
-			&& !atomic_read(&clp->cl_callback.cb_set))
+			&& !atomic_read(&clp->cl_cb_conn.cb_set))
 		goto out;
 	status = nfs_ok;
 out:
@@ -2738,12 +2718,42 @@ nfs4_check_fh(struct svc_fh *fhp, struct nfs4_stateid *stp)
 static int
 STALE_STATEID(stateid_t *stateid)
 {
-	if (stateid->si_boot == boot_time)
-		return 0;
-	dprintk("NFSD: stale stateid (%08x/%08x/%08x/%08x)!\n",
-		stateid->si_boot, stateid->si_stateownerid, stateid->si_fileid,
-		stateid->si_generation);
-	return 1;
+	if (time_after((unsigned long)boot_time,
+			(unsigned long)stateid->si_boot)) {
+		dprintk("NFSD: stale stateid (%08x/%08x/%08x/%08x)!\n",
+			stateid->si_boot, stateid->si_stateownerid,
+			stateid->si_fileid, stateid->si_generation);
+		return 1;
+	}
+	return 0;
+}
+
+static int
+EXPIRED_STATEID(stateid_t *stateid)
+{
+	if (time_before((unsigned long)boot_time,
+			((unsigned long)stateid->si_boot)) &&
+	    time_before((unsigned long)(stateid->si_boot + lease_time), get_seconds())) {
+		dprintk("NFSD: expired stateid (%08x/%08x/%08x/%08x)!\n",
+			stateid->si_boot, stateid->si_stateownerid,
+			stateid->si_fileid, stateid->si_generation);
+		return 1;
+	}
+	return 0;
+}
+
+static __be32
+stateid_error_map(stateid_t *stateid)
+{
+	if (STALE_STATEID(stateid))
+		return nfserr_stale_stateid;
+	if (EXPIRED_STATEID(stateid))
+		return nfserr_expired;
+
+	dprintk("NFSD: bad stateid (%08x/%08x/%08x/%08x)!\n",
+		stateid->si_boot, stateid->si_stateownerid,
+		stateid->si_fileid, stateid->si_generation);
+	return nfserr_bad_stateid;
 }
 
 static inline int
@@ -2867,8 +2877,10 @@ nfs4_preprocess_stateid_op(struct nfsd4_compound_state *cstate,
 	status = nfserr_bad_stateid;
 	if (is_delegation_stateid(stateid)) {
 		dp = find_delegation_stateid(ino, stateid);
-		if (!dp)
+		if (!dp) {
+			status = stateid_error_map(stateid);
 			goto out;
+		}
 		status = check_stateid_generation(stateid, &dp->dl_stateid,
 						  flags);
 		if (status)
@@ -2881,8 +2893,10 @@ nfs4_preprocess_stateid_op(struct nfsd4_compound_state *cstate,
 			*filpp = dp->dl_vfs_file;
 	} else { /* open or lock stateid */
 		stp = find_stateid(stateid, flags);
-		if (!stp)
+		if (!stp) {
+			status = stateid_error_map(stateid);
 			goto out;
+		}
 		if (nfs4_check_fh(current_fh, stp))
 			goto out;
 		if (!stp->st_stateowner->so_confirmed)
@@ -2956,7 +2970,7 @@ nfs4_preprocess_seqid_op(struct nfsd4_compound_state *cstate, u32 seqid,
 		 */
 		sop = search_close_lru(stateid->si_stateownerid, flags);
 		if (sop == NULL)
-			return nfserr_bad_stateid;
+			return stateid_error_map(stateid);
 		*sopp = sop;
 		goto check_replay;
 	}
@@ -3227,8 +3241,10 @@ nfsd4_delegreturn(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
 	if (!is_delegation_stateid(stateid))
 		goto out;
 	dp = find_delegation_stateid(inode, stateid);
-	if (!dp)
+	if (!dp) {
+		status = stateid_error_map(stateid);
 		goto out;
+	}
 	status = check_stateid_generation(stateid, &dp->dl_stateid, flags);
 	if (status)
 		goto out;
@@ -3455,7 +3471,7 @@ alloc_init_lock_stateid(struct nfs4_stateowner *sop, struct nfs4_file *fp, struc
 	stp->st_stateowner = sop;
 	get_nfs4_file(fp);
 	stp->st_file = fp;
-	stp->st_stateid.si_boot = boot_time;
+	stp->st_stateid.si_boot = get_seconds();
 	stp->st_stateid.si_stateownerid = sop->so_id;
 	stp->st_stateid.si_fileid = fp->fi_id;
 	stp->st_stateid.si_generation = 0;
@@ -3987,6 +4003,7 @@ nfs4_state_init(void)
 		INIT_LIST_HEAD(&conf_str_hashtbl[i]);
 		INIT_LIST_HEAD(&unconf_str_hashtbl[i]);
 		INIT_LIST_HEAD(&unconf_id_hashtbl[i]);
+		INIT_LIST_HEAD(&reclaim_str_hashtbl[i]);
 	}
 	for (i = 0; i < SESSION_HASH_SIZE; i++)
 		INIT_LIST_HEAD(&sessionid_hashtbl[i]);
@@ -4009,8 +4026,6 @@ nfs4_state_init(void)
 	INIT_LIST_HEAD(&close_lru);
 	INIT_LIST_HEAD(&client_lru);
 	INIT_LIST_HEAD(&del_recall_lru);
-	for (i = 0; i < CLIENT_HASH_SIZE; i++)
-		INIT_LIST_HEAD(&reclaim_str_hashtbl[i]);
 	reclaim_str_hashtbl_size = 0;
 	return 0;
 }
diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index b73549d293b..2dcc7feaa6f 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -83,16 +83,6 @@ check_filename(char *str, int len, __be32 err)
 	return 0;
 }
 
-/*
- * START OF "GENERIC" DECODE ROUTINES.
- *   These may look a little ugly since they are imported from a "generic"
- * set of XDR encode/decode routines which are intended to be shared by
- * all of our NFSv4 implementations (OpenBSD, MacOS X...).
- *
- * If the pain of reading these is too great, it should be a straightforward
- * task to translate them into Linux-specific versions which are more
- * consistent with the style used in NFSv2/v3...
- */
 #define DECODE_HEAD				\
 	__be32 *p;				\
 	__be32 status
@@ -254,20 +244,8 @@ nfsd4_decode_bitmap(struct nfsd4_compoundargs *argp, u32 *bmval)
 	DECODE_TAIL;
 }
 
-static u32 nfsd_attrmask[] = {
-	NFSD_WRITEABLE_ATTRS_WORD0,
-	NFSD_WRITEABLE_ATTRS_WORD1,
-	NFSD_WRITEABLE_ATTRS_WORD2
-};
-
-static u32 nfsd41_ex_attrmask[] = {
-	NFSD_SUPPATTR_EXCLCREAT_WORD0,
-	NFSD_SUPPATTR_EXCLCREAT_WORD1,
-	NFSD_SUPPATTR_EXCLCREAT_WORD2
-};
-
 static __be32
-nfsd4_decode_fattr(struct nfsd4_compoundargs *argp, u32 *bmval, u32 *writable,
+nfsd4_decode_fattr(struct nfsd4_compoundargs *argp, u32 *bmval,
 		   struct iattr *iattr, struct nfs4_acl **acl)
 {
 	int expected_len, len = 0;
@@ -280,18 +258,6 @@ nfsd4_decode_fattr(struct nfsd4_compoundargs *argp, u32 *bmval, u32 *writable,
 	if ((status = nfsd4_decode_bitmap(argp, bmval)))
 		return status;
 
-	/*
-	 * According to spec, unsupported attributes return ERR_ATTRNOTSUPP;
-	 * read-only attributes return ERR_INVAL.
-	 */
-	if ((bmval[0] & ~nfsd_suppattrs0(argp->minorversion)) ||
-	    (bmval[1] & ~nfsd_suppattrs1(argp->minorversion)) ||
-	    (bmval[2] & ~nfsd_suppattrs2(argp->minorversion)))
-		return nfserr_attrnotsupp;
-	if ((bmval[0] & ~writable[0]) || (bmval[1] & ~writable[1]) ||
-	    (bmval[2] & ~writable[2]))
-		return nfserr_inval;
-
 	READ_BUF(4);
 	READ32(expected_len);
 
@@ -424,8 +390,11 @@ nfsd4_decode_fattr(struct nfsd4_compoundargs *argp, u32 *bmval, u32 *writable,
 			goto xdr_error;
 		}
 	}
-	BUG_ON(bmval[2]);	/* no such writeable attr supported yet */
-	if (len != expected_len)
+	if (bmval[0] & ~NFSD_WRITEABLE_ATTRS_WORD0
+	    || bmval[1] & ~NFSD_WRITEABLE_ATTRS_WORD1
+	    || bmval[2] & ~NFSD_WRITEABLE_ATTRS_WORD2)
+		READ_BUF(expected_len - len);
+	else if (len != expected_len)
 		goto xdr_error;
 
 	DECODE_TAIL;
@@ -518,8 +487,8 @@ nfsd4_decode_create(struct nfsd4_compoundargs *argp, struct nfsd4_create *create
 	if ((status = check_filename(create->cr_name, create->cr_namelen, nfserr_inval)))
 		return status;
 
-	status = nfsd4_decode_fattr(argp, create->cr_bmval, nfsd_attrmask,
-				    &create->cr_iattr, &create->cr_acl);
+	status = nfsd4_decode_fattr(argp, create->cr_bmval, &create->cr_iattr,
+				    &create->cr_acl);
 	if (status)
 		goto out;
 
@@ -682,7 +651,7 @@ nfsd4_decode_open(struct nfsd4_compoundargs *argp, struct nfsd4_open *open)
 		case NFS4_CREATE_UNCHECKED:
 		case NFS4_CREATE_GUARDED:
 			status = nfsd4_decode_fattr(argp, open->op_bmval,
-				nfsd_attrmask, &open->op_iattr, &open->op_acl);
+				&open->op_iattr, &open->op_acl);
 			if (status)
 				goto out;
 			break;
@@ -696,8 +665,7 @@ nfsd4_decode_open(struct nfsd4_compoundargs *argp, struct nfsd4_open *open)
 			READ_BUF(8);
 			COPYMEM(open->op_verf.data, 8);
 			status = nfsd4_decode_fattr(argp, open->op_bmval,
-				nfsd41_ex_attrmask, &open->op_iattr,
-				&open->op_acl);
+				&open->op_iattr, &open->op_acl);
 			if (status)
 				goto out;
 			break;
@@ -893,8 +861,8 @@ nfsd4_decode_setattr(struct nfsd4_compoundargs *argp, struct nfsd4_setattr *seta
 	status = nfsd4_decode_stateid(argp, &setattr->sa_stateid);
 	if (status)
 		return status;
-	return nfsd4_decode_fattr(argp, setattr->sa_bmval, nfsd_attrmask,
-				  &setattr->sa_iattr, &setattr->sa_acl);
+	return nfsd4_decode_fattr(argp, setattr->sa_bmval, &setattr->sa_iattr,
+				  &setattr->sa_acl);
 }
 
 static __be32
@@ -1328,64 +1296,64 @@ static nfsd4_dec nfsd4_dec_ops[] = {
 };
 
 static nfsd4_dec nfsd41_dec_ops[] = {
-	[OP_ACCESS]		(nfsd4_dec)nfsd4_decode_access,
-	[OP_CLOSE]		(nfsd4_dec)nfsd4_decode_close,
-	[OP_COMMIT]		(nfsd4_dec)nfsd4_decode_commit,
-	[OP_CREATE]		(nfsd4_dec)nfsd4_decode_create,
-	[OP_DELEGPURGE]		(nfsd4_dec)nfsd4_decode_notsupp,
-	[OP_DELEGRETURN]	(nfsd4_dec)nfsd4_decode_delegreturn,
-	[OP_GETATTR]		(nfsd4_dec)nfsd4_decode_getattr,
-	[OP_GETFH]		(nfsd4_dec)nfsd4_decode_noop,
-	[OP_LINK]		(nfsd4_dec)nfsd4_decode_link,
-	[OP_LOCK]		(nfsd4_dec)nfsd4_decode_lock,
-	[OP_LOCKT]		(nfsd4_dec)nfsd4_decode_lockt,
-	[OP_LOCKU]		(nfsd4_dec)nfsd4_decode_locku,
-	[OP_LOOKUP]		(nfsd4_dec)nfsd4_decode_lookup,
-	[OP_LOOKUPP]		(nfsd4_dec)nfsd4_decode_noop,
-	[OP_NVERIFY]		(nfsd4_dec)nfsd4_decode_verify,
-	[OP_OPEN]		(nfsd4_dec)nfsd4_decode_open,
-	[OP_OPENATTR]		(nfsd4_dec)nfsd4_decode_notsupp,
-	[OP_OPEN_CONFIRM]	(nfsd4_dec)nfsd4_decode_notsupp,
-	[OP_OPEN_DOWNGRADE]	(nfsd4_dec)nfsd4_decode_open_downgrade,
-	[OP_PUTFH]		(nfsd4_dec)nfsd4_decode_putfh,
-	[OP_PUTPUBFH]		(nfsd4_dec)nfsd4_decode_notsupp,
-	[OP_PUTROOTFH]		(nfsd4_dec)nfsd4_decode_noop,
-	[OP_READ]		(nfsd4_dec)nfsd4_decode_read,
-	[OP_READDIR]		(nfsd4_dec)nfsd4_decode_readdir,
-	[OP_READLINK]		(nfsd4_dec)nfsd4_decode_noop,
-	[OP_REMOVE]		(nfsd4_dec)nfsd4_decode_remove,
-	[OP_RENAME]		(nfsd4_dec)nfsd4_decode_rename,
-	[OP_RENEW]		(nfsd4_dec)nfsd4_decode_notsupp,
-	[OP_RESTOREFH]		(nfsd4_dec)nfsd4_decode_noop,
-	[OP_SAVEFH]		(nfsd4_dec)nfsd4_decode_noop,
-	[OP_SECINFO]		(nfsd4_dec)nfsd4_decode_secinfo,
-	[OP_SETATTR]		(nfsd4_dec)nfsd4_decode_setattr,
-	[OP_SETCLIENTID]	(nfsd4_dec)nfsd4_decode_notsupp,
-	[OP_SETCLIENTID_CONFIRM](nfsd4_dec)nfsd4_decode_notsupp,
-	[OP_VERIFY]		(nfsd4_dec)nfsd4_decode_verify,
-	[OP_WRITE]		(nfsd4_dec)nfsd4_decode_write,
-	[OP_RELEASE_LOCKOWNER]	(nfsd4_dec)nfsd4_decode_notsupp,
+	[OP_ACCESS]		= (nfsd4_dec)nfsd4_decode_access,
+	[OP_CLOSE]		= (nfsd4_dec)nfsd4_decode_close,
+	[OP_COMMIT]		= (nfsd4_dec)nfsd4_decode_commit,
+	[OP_CREATE]		= (nfsd4_dec)nfsd4_decode_create,
+	[OP_DELEGPURGE]		= (nfsd4_dec)nfsd4_decode_notsupp,
+	[OP_DELEGRETURN]	= (nfsd4_dec)nfsd4_decode_delegreturn,
+	[OP_GETATTR]		= (nfsd4_dec)nfsd4_decode_getattr,
+	[OP_GETFH]		= (nfsd4_dec)nfsd4_decode_noop,
+	[OP_LINK]		= (nfsd4_dec)nfsd4_decode_link,
+	[OP_LOCK]		= (nfsd4_dec)nfsd4_decode_lock,
+	[OP_LOCKT]		= (nfsd4_dec)nfsd4_decode_lockt,
+	[OP_LOCKU]		= (nfsd4_dec)nfsd4_decode_locku,
+	[OP_LOOKUP]		= (nfsd4_dec)nfsd4_decode_lookup,
+	[OP_LOOKUPP]		= (nfsd4_dec)nfsd4_decode_noop,
+	[OP_NVERIFY]		= (nfsd4_dec)nfsd4_decode_verify,
+	[OP_OPEN]		= (nfsd4_dec)nfsd4_decode_open,
+	[OP_OPENATTR]		= (nfsd4_dec)nfsd4_decode_notsupp,
+	[OP_OPEN_CONFIRM]	= (nfsd4_dec)nfsd4_decode_notsupp,
+	[OP_OPEN_DOWNGRADE]	= (nfsd4_dec)nfsd4_decode_open_downgrade,
+	[OP_PUTFH]		= (nfsd4_dec)nfsd4_decode_putfh,
+	[OP_PUTPUBFH]		= (nfsd4_dec)nfsd4_decode_notsupp,
+	[OP_PUTROOTFH]		= (nfsd4_dec)nfsd4_decode_noop,
+	[OP_READ]		= (nfsd4_dec)nfsd4_decode_read,
+	[OP_READDIR]		= (nfsd4_dec)nfsd4_decode_readdir,
+	[OP_READLINK]		= (nfsd4_dec)nfsd4_decode_noop,
+	[OP_REMOVE]		= (nfsd4_dec)nfsd4_decode_remove,
+	[OP_RENAME]		= (nfsd4_dec)nfsd4_decode_rename,
+	[OP_RENEW]		= (nfsd4_dec)nfsd4_decode_notsupp,
+	[OP_RESTOREFH]		= (nfsd4_dec)nfsd4_decode_noop,
+	[OP_SAVEFH]		= (nfsd4_dec)nfsd4_decode_noop,
+	[OP_SECINFO]		= (nfsd4_dec)nfsd4_decode_secinfo,
+	[OP_SETATTR]		= (nfsd4_dec)nfsd4_decode_setattr,
+	[OP_SETCLIENTID]	= (nfsd4_dec)nfsd4_decode_notsupp,
+	[OP_SETCLIENTID_CONFIRM]= (nfsd4_dec)nfsd4_decode_notsupp,
+	[OP_VERIFY]		= (nfsd4_dec)nfsd4_decode_verify,
+	[OP_WRITE]		= (nfsd4_dec)nfsd4_decode_write,
+	[OP_RELEASE_LOCKOWNER]	= (nfsd4_dec)nfsd4_decode_notsupp,
 
 	/* new operations for NFSv4.1 */
-	[OP_BACKCHANNEL_CTL]	(nfsd4_dec)nfsd4_decode_notsupp,
-	[OP_BIND_CONN_TO_SESSION](nfsd4_dec)nfsd4_decode_notsupp,
-	[OP_EXCHANGE_ID]	(nfsd4_dec)nfsd4_decode_exchange_id,
-	[OP_CREATE_SESSION]	(nfsd4_dec)nfsd4_decode_create_session,
-	[OP_DESTROY_SESSION]	(nfsd4_dec)nfsd4_decode_destroy_session,
-	[OP_FREE_STATEID]	(nfsd4_dec)nfsd4_decode_notsupp,
-	[OP_GET_DIR_DELEGATION]	(nfsd4_dec)nfsd4_decode_notsupp,
-	[OP_GETDEVICEINFO]	(nfsd4_dec)nfsd4_decode_notsupp,
-	[OP_GETDEVICELIST]	(nfsd4_dec)nfsd4_decode_notsupp,
-	[OP_LAYOUTCOMMIT]	(nfsd4_dec)nfsd4_decode_notsupp,
-	[OP_LAYOUTGET]		(nfsd4_dec)nfsd4_decode_notsupp,
-	[OP_LAYOUTRETURN]	(nfsd4_dec)nfsd4_decode_notsupp,
-	[OP_SECINFO_NO_NAME]	(nfsd4_dec)nfsd4_decode_notsupp,
-	[OP_SEQUENCE]		(nfsd4_dec)nfsd4_decode_sequence,
-	[OP_SET_SSV]		(nfsd4_dec)nfsd4_decode_notsupp,
-	[OP_TEST_STATEID]	(nfsd4_dec)nfsd4_decode_notsupp,
-	[OP_WANT_DELEGATION]	(nfsd4_dec)nfsd4_decode_notsupp,
-	[OP_DESTROY_CLIENTID]	(nfsd4_dec)nfsd4_decode_notsupp,
-	[OP_RECLAIM_COMPLETE]	(nfsd4_dec)nfsd4_decode_notsupp,
+	[OP_BACKCHANNEL_CTL]	= (nfsd4_dec)nfsd4_decode_notsupp,
+	[OP_BIND_CONN_TO_SESSION]= (nfsd4_dec)nfsd4_decode_notsupp,
+	[OP_EXCHANGE_ID]	= (nfsd4_dec)nfsd4_decode_exchange_id,
+	[OP_CREATE_SESSION]	= (nfsd4_dec)nfsd4_decode_create_session,
+	[OP_DESTROY_SESSION]	= (nfsd4_dec)nfsd4_decode_destroy_session,
+	[OP_FREE_STATEID]	= (nfsd4_dec)nfsd4_decode_notsupp,
+	[OP_GET_DIR_DELEGATION]	= (nfsd4_dec)nfsd4_decode_notsupp,
+	[OP_GETDEVICEINFO]	= (nfsd4_dec)nfsd4_decode_notsupp,
+	[OP_GETDEVICELIST]	= (nfsd4_dec)nfsd4_decode_notsupp,
+	[OP_LAYOUTCOMMIT]	= (nfsd4_dec)nfsd4_decode_notsupp,
+	[OP_LAYOUTGET]		= (nfsd4_dec)nfsd4_decode_notsupp,
+	[OP_LAYOUTRETURN]	= (nfsd4_dec)nfsd4_decode_notsupp,
+	[OP_SECINFO_NO_NAME]	= (nfsd4_dec)nfsd4_decode_notsupp,
+	[OP_SEQUENCE]		= (nfsd4_dec)nfsd4_decode_sequence,
+	[OP_SET_SSV]		= (nfsd4_dec)nfsd4_decode_notsupp,
+	[OP_TEST_STATEID]	= (nfsd4_dec)nfsd4_decode_notsupp,
+	[OP_WANT_DELEGATION]	= (nfsd4_dec)nfsd4_decode_notsupp,
+	[OP_DESTROY_CLIENTID]	= (nfsd4_dec)nfsd4_decode_notsupp,
+	[OP_RECLAIM_COMPLETE]	= (nfsd4_dec)nfsd4_decode_notsupp,
 };
 
 struct nfsd4_minorversion_ops {
@@ -1489,21 +1457,6 @@ nfsd4_decode_compound(struct nfsd4_compoundargs *argp)
 
 	DECODE_TAIL;
 }
-/*
- * END OF "GENERIC" DECODE ROUTINES.
- */
-
-/*
- * START OF "GENERIC" ENCODE ROUTINES.
- *   These may look a little ugly since they are imported from a "generic"
- * set of XDR encode/decode routines which are intended to be shared by
- * all of our NFSv4 implementations (OpenBSD, MacOS X...).
- *
- * If the pain of reading these is too great, it should be a straightforward
- * task to translate them into Linux-specific versions which are more
- * consistent with the style used in NFSv2/v3...
- */
-#define ENCODE_HEAD              __be32 *p
 
 #define WRITE32(n)               *p++ = htonl(n)
 #define WRITE64(n)               do {				\
@@ -1515,13 +1468,41 @@ nfsd4_decode_compound(struct nfsd4_compoundargs *argp)
 	memcpy(p, ptr, nbytes);					\
 	p += XDR_QUADLEN(nbytes);				\
 }} while (0)
-#define WRITECINFO(c)		do {				\
-	*p++ = htonl(c.atomic);					\
-	*p++ = htonl(c.before_ctime_sec);				\
-	*p++ = htonl(c.before_ctime_nsec);				\
-	*p++ = htonl(c.after_ctime_sec);				\
-	*p++ = htonl(c.after_ctime_nsec);				\
-} while (0)
+
+static void write32(__be32 **p, u32 n)
+{
+	*(*p)++ = n;
+}
+
+static void write64(__be32 **p, u64 n)
+{
+	write32(p, (u32)(n >> 32));
+	write32(p, (u32)n);
+}
+
+static void write_change(__be32 **p, struct kstat *stat, struct inode *inode)
+{
+	if (IS_I_VERSION(inode)) {
+		write64(p, inode->i_version);
+	} else {
+		write32(p, stat->ctime.tv_sec);
+		write32(p, stat->ctime.tv_nsec);
+	}
+}
+
+static void write_cinfo(__be32 **p, struct nfsd4_change_info *c)
+{
+	write32(p, c->atomic);
+	if (c->change_supported) {
+		write64(p, c->before_change);
+		write64(p, c->after_change);
+	} else {
+		write32(p, c->before_ctime_sec);
+		write32(p, c->before_ctime_nsec);
+		write32(p, c->after_ctime_sec);
+		write32(p, c->after_ctime_nsec);
+	}
+}
 
 #define RESERVE_SPACE(nbytes)	do {				\
 	p = resp->p;						\
@@ -1874,16 +1855,9 @@ nfsd4_encode_fattr(struct svc_fh *fhp, struct svc_export *exp,
 			WRITE32(NFS4_FH_PERSISTENT|NFS4_FH_VOL_RENAME);
 	}
 	if (bmval0 & FATTR4_WORD0_CHANGE) {
-		/*
-		 * Note: This _must_ be consistent with the scheme for writing
-		 * change_info, so any changes made here must be reflected there
-		 * as well.  (See xdr4.h:set_change_info() and the WRITECINFO()
-		 * macro above.)
-		 */
 		if ((buflen -= 8) < 0)
 			goto out_resource;
-		WRITE32(stat.ctime.tv_sec);
-		WRITE32(stat.ctime.tv_nsec);
+		write_change(&p, &stat, dentry->d_inode);
 	}
 	if (bmval0 & FATTR4_WORD0_SIZE) {
 		if ((buflen -= 8) < 0)
@@ -2348,7 +2322,7 @@ fail:
 static void
 nfsd4_encode_stateid(struct nfsd4_compoundres *resp, stateid_t *sid)
 {
-	ENCODE_HEAD;
+	__be32 *p;
 
 	RESERVE_SPACE(sizeof(stateid_t));
 	WRITE32(sid->si_generation);
@@ -2359,7 +2333,7 @@ nfsd4_encode_stateid(struct nfsd4_compoundres *resp, stateid_t *sid)
 static __be32
 nfsd4_encode_access(struct nfsd4_compoundres *resp, __be32 nfserr, struct nfsd4_access *access)
 {
-	ENCODE_HEAD;
+	__be32 *p;
 
 	if (!nfserr) {
 		RESERVE_SPACE(8);
@@ -2386,7 +2360,7 @@ nfsd4_encode_close(struct nfsd4_compoundres *resp, __be32 nfserr, struct nfsd4_c
 static __be32
 nfsd4_encode_commit(struct nfsd4_compoundres *resp, __be32 nfserr, struct nfsd4_commit *commit)
 {
-	ENCODE_HEAD;
+	__be32 *p;
 
 	if (!nfserr) {
 		RESERVE_SPACE(8);
@@ -2399,11 +2373,11 @@ nfsd4_encode_commit(struct nfsd4_compoundres *resp, __be32 nfserr, struct nfsd4_
 static __be32
 nfsd4_encode_create(struct nfsd4_compoundres *resp, __be32 nfserr, struct nfsd4_create *create)
 {
-	ENCODE_HEAD;
+	__be32 *p;
 
 	if (!nfserr) {
 		RESERVE_SPACE(32);
-		WRITECINFO(create->cr_cinfo);
+		write_cinfo(&p, &create->cr_cinfo);
 		WRITE32(2);
 		WRITE32(create->cr_bmval[0]);
 		WRITE32(create->cr_bmval[1]);
@@ -2435,7 +2409,7 @@ nfsd4_encode_getfh(struct nfsd4_compoundres *resp, __be32 nfserr, struct svc_fh
 {
 	struct svc_fh *fhp = *fhpp;
 	unsigned int len;
-	ENCODE_HEAD;
+	__be32 *p;
 
 	if (!nfserr) {
 		len = fhp->fh_handle.fh_size;
@@ -2454,7 +2428,7 @@ nfsd4_encode_getfh(struct nfsd4_compoundres *resp, __be32 nfserr, struct svc_fh
 static void
 nfsd4_encode_lock_denied(struct nfsd4_compoundres *resp, struct nfsd4_lock_denied *ld)
 {
-	ENCODE_HEAD;
+	__be32 *p;
 
 	RESERVE_SPACE(32 + XDR_LEN(ld->ld_sop ? ld->ld_sop->so_owner.len : 0));
 	WRITE64(ld->ld_start);
@@ -2510,11 +2484,11 @@ nfsd4_encode_locku(struct nfsd4_compoundres *resp, __be32 nfserr, struct nfsd4_l
 static __be32
 nfsd4_encode_link(struct nfsd4_compoundres *resp, __be32 nfserr, struct nfsd4_link *link)
 {
-	ENCODE_HEAD;
+	__be32 *p;
 
 	if (!nfserr) {
 		RESERVE_SPACE(20);
-		WRITECINFO(link->li_cinfo);
+		write_cinfo(&p, &link->li_cinfo);
 		ADJUST_ARGS();
 	}
 	return nfserr;
@@ -2524,7 +2498,7 @@ nfsd4_encode_link(struct nfsd4_compoundres *resp, __be32 nfserr, struct nfsd4_li
 static __be32
 nfsd4_encode_open(struct nfsd4_compoundres *resp, __be32 nfserr, struct nfsd4_open *open)
 {
-	ENCODE_HEAD;
+	__be32 *p;
 	ENCODE_SEQID_OP_HEAD;
 
 	if (nfserr)
@@ -2532,7 +2506,7 @@ nfsd4_encode_open(struct nfsd4_compoundres *resp, __be32 nfserr, struct nfsd4_op
 
 	nfsd4_encode_stateid(resp, &open->op_stateid);
 	RESERVE_SPACE(40);
-	WRITECINFO(open->op_cinfo);
+	write_cinfo(&p, &open->op_cinfo);
 	WRITE32(open->op_rflags);
 	WRITE32(2);
 	WRITE32(open->op_bmval[0]);
@@ -2619,7 +2593,7 @@ nfsd4_encode_read(struct nfsd4_compoundres *resp, __be32 nfserr,
 	int v, pn;
 	unsigned long maxcount; 
 	long len;
-	ENCODE_HEAD;
+	__be32 *p;
 
 	if (nfserr)
 		return nfserr;
@@ -2681,7 +2655,7 @@ nfsd4_encode_readlink(struct nfsd4_compoundres *resp, __be32 nfserr, struct nfsd
 {
 	int maxcount;
 	char *page;
-	ENCODE_HEAD;
+	__be32 *p;
 
 	if (nfserr)
 		return nfserr;
@@ -2730,7 +2704,7 @@ nfsd4_encode_readdir(struct nfsd4_compoundres *resp, __be32 nfserr, struct nfsd4
 	int maxcount;
 	loff_t offset;
 	__be32 *page, *savep, *tailbase;
-	ENCODE_HEAD;
+	__be32 *p;
 
 	if (nfserr)
 		return nfserr;
@@ -2806,11 +2780,11 @@ err_no_verf:
 static __be32
 nfsd4_encode_remove(struct nfsd4_compoundres *resp, __be32 nfserr, struct nfsd4_remove *remove)
 {
-	ENCODE_HEAD;
+	__be32 *p;
 
 	if (!nfserr) {
 		RESERVE_SPACE(20);
-		WRITECINFO(remove->rm_cinfo);
+		write_cinfo(&p, &remove->rm_cinfo);
 		ADJUST_ARGS();
 	}
 	return nfserr;
@@ -2819,12 +2793,12 @@ nfsd4_encode_remove(struct nfsd4_compoundres *resp, __be32 nfserr, struct nfsd4_
 static __be32
 nfsd4_encode_rename(struct nfsd4_compoundres *resp, __be32 nfserr, struct nfsd4_rename *rename)
 {
-	ENCODE_HEAD;
+	__be32 *p;
 
 	if (!nfserr) {
 		RESERVE_SPACE(40);
-		WRITECINFO(rename->rn_sinfo);
-		WRITECINFO(rename->rn_tinfo);
+		write_cinfo(&p, &rename->rn_sinfo);
+		write_cinfo(&p, &rename->rn_tinfo);
 		ADJUST_ARGS();
 	}
 	return nfserr;
@@ -2839,7 +2813,7 @@ nfsd4_encode_secinfo(struct nfsd4_compoundres *resp, __be32 nfserr,
 	u32 nflavs;
 	struct exp_flavor_info *flavs;
 	struct exp_flavor_info def_flavs[2];
-	ENCODE_HEAD;
+	__be32 *p;
 
 	if (nfserr)
 		goto out;
@@ -2904,7 +2878,7 @@ out:
 static __be32
 nfsd4_encode_setattr(struct nfsd4_compoundres *resp, __be32 nfserr, struct nfsd4_setattr *setattr)
 {
-	ENCODE_HEAD;
+	__be32 *p;
 
 	RESERVE_SPACE(12);
 	if (nfserr) {
@@ -2924,7 +2898,7 @@ nfsd4_encode_setattr(struct nfsd4_compoundres *resp, __be32 nfserr, struct nfsd4
 static __be32
 nfsd4_encode_setclientid(struct nfsd4_compoundres *resp, __be32 nfserr, struct nfsd4_setclientid *scd)
 {
-	ENCODE_HEAD;
+	__be32 *p;
 
 	if (!nfserr) {
 		RESERVE_SPACE(8 + sizeof(nfs4_verifier));
@@ -2944,7 +2918,7 @@ nfsd4_encode_setclientid(struct nfsd4_compoundres *resp, __be32 nfserr, struct n
 static __be32
 nfsd4_encode_write(struct nfsd4_compoundres *resp, __be32 nfserr, struct nfsd4_write *write)
 {
-	ENCODE_HEAD;
+	__be32 *p;
 
 	if (!nfserr) {
 		RESERVE_SPACE(16);
@@ -2960,7 +2934,7 @@ static __be32
 nfsd4_encode_exchange_id(struct nfsd4_compoundres *resp, int nfserr,
 			 struct nfsd4_exchange_id *exid)
 {
-	ENCODE_HEAD;
+	__be32 *p;
 	char *major_id;
 	char *server_scope;
 	int major_id_sz;
@@ -3015,7 +2989,7 @@ static __be32
 nfsd4_encode_create_session(struct nfsd4_compoundres *resp, int nfserr,
 			    struct nfsd4_create_session *sess)
 {
-	ENCODE_HEAD;
+	__be32 *p;
 
 	if (nfserr)
 		return nfserr;
@@ -3071,7 +3045,7 @@ __be32
 nfsd4_encode_sequence(struct nfsd4_compoundres *resp, int nfserr,
 		      struct nfsd4_sequence *seq)
 {
-	ENCODE_HEAD;
+	__be32 *p;
 
 	if (nfserr)
 		return nfserr;
@@ -3209,7 +3183,7 @@ static int nfsd4_check_drc_limit(struct nfsd4_compoundres *resp)
 	dprintk("%s length %u, xb->page_len %u tlen %u pad %u\n", __func__,
 		length, xb->page_len, tlen, pad);
 
-	if (length <= session->se_fmaxresp_cached)
+	if (length <= session->se_fchannel.maxresp_cached)
 		return status;
 	else
 		return nfserr_rep_too_big_to_cache;
@@ -3219,7 +3193,7 @@ void
 nfsd4_encode_operation(struct nfsd4_compoundres *resp, struct nfsd4_op *op)
 {
 	__be32 *statp;
-	ENCODE_HEAD;
+	__be32 *p;
 
 	RESERVE_SPACE(8);
 	WRITE32(op->opnum);
@@ -3253,7 +3227,7 @@ status:
 void
 nfsd4_encode_replay(struct nfsd4_compoundres *resp, struct nfsd4_op *op)
 {
-	ENCODE_HEAD;
+	__be32 *p;
 	struct nfs4_replay *rp = op->replay;
 
 	BUG_ON(!rp);
@@ -3268,10 +3242,6 @@ nfsd4_encode_replay(struct nfsd4_compoundres *resp, struct nfsd4_op *op)
 	ADJUST_ARGS();
 }
 
-/*
- * END OF "GENERIC" ENCODE ROUTINES.
- */
-
 int
 nfs4svc_encode_voidres(struct svc_rqst *rqstp, __be32 *p, void *dummy)
 {
diff --git a/fs/nfsd/nfscache.c b/fs/nfsd/nfscache.c
index 5bfc2ac60d5..4638635c5d8 100644
--- a/fs/nfsd/nfscache.c
+++ b/fs/nfsd/nfscache.c
@@ -29,15 +29,24 @@
  */
 #define CACHESIZE		1024
 #define HASHSIZE		64
-#define REQHASH(xid)		(((((__force __u32)xid) >> 24) ^ ((__force __u32)xid)) & (HASHSIZE-1))
 
-static struct hlist_head *	hash_list;
+static struct hlist_head *	cache_hash;
 static struct list_head 	lru_head;
 static int			cache_disabled = 1;
 
+/*
+ * Calculate the hash index from an XID.
+ */
+static inline u32 request_hash(u32 xid)
+{
+	u32 h = xid;
+	h ^= (xid >> 24);
+	return h & (HASHSIZE-1);
+}
+
 static int	nfsd_cache_append(struct svc_rqst *rqstp, struct kvec *vec);
 
-/* 
+/*
  * locking for the reply cache:
  * A cache entry is "single use" if c_state == RC_INPROG
  * Otherwise, it when accessing _prev or _next, the lock must be held.
@@ -62,8 +71,8 @@ int nfsd_reply_cache_init(void)
 		i--;
 	}
 
-	hash_list = kcalloc (HASHSIZE, sizeof(struct hlist_head), GFP_KERNEL);
-	if (!hash_list)
+	cache_hash = kcalloc (HASHSIZE, sizeof(struct hlist_head), GFP_KERNEL);
+	if (!cache_hash)
 		goto out_nomem;
 
 	cache_disabled = 0;
@@ -88,8 +97,8 @@ void nfsd_reply_cache_shutdown(void)
 
 	cache_disabled = 1;
 
-	kfree (hash_list);
-	hash_list = NULL;
+	kfree (cache_hash);
+	cache_hash = NULL;
 }
 
 /*
@@ -108,7 +117,7 @@ static void
 hash_refile(struct svc_cacherep *rp)
 {
 	hlist_del_init(&rp->c_hash);
-	hlist_add_head(&rp->c_hash, hash_list + REQHASH(rp->c_xid));
+	hlist_add_head(&rp->c_hash, cache_hash + request_hash(rp->c_xid));
 }
 
 /*
@@ -138,7 +147,7 @@ nfsd_cache_lookup(struct svc_rqst *rqstp, int type)
 	spin_lock(&cache_lock);
 	rtn = RC_DOIT;
 
-	rh = &hash_list[REQHASH(xid)];
+	rh = &cache_hash[request_hash(xid)];
 	hlist_for_each_entry(rp, hn, rh, c_hash) {
 		if (rp->c_state != RC_UNUSED &&
 		    xid == rp->c_xid && proc == rp->c_proc &&
@@ -165,8 +174,8 @@ nfsd_cache_lookup(struct svc_rqst *rqstp, int type)
 	}
 	}
 
-	/* This should not happen */
-	if (rp == NULL) {
+	/* All entries on the LRU are in-progress. This should not happen */
+	if (&rp->c_lru == &lru_head) {
 		static int	complaints;
 
 		printk(KERN_WARNING "nfsd: all repcache entries locked!\n");
@@ -264,7 +273,7 @@ nfsd_cache_update(struct svc_rqst *rqstp, int cachetype, __be32 *statp)
 
 	len = resv->iov_len - ((char*)statp - (char*)resv->iov_base);
 	len >>= 2;
-	
+
 	/* Don't cache excessive amounts of data and XDR failures */
 	if (!statp || len > (256 >> 2)) {
 		rp->c_state = RC_UNUSED;
diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c
index af16849d243..1250fb978ac 100644
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -207,10 +207,14 @@ static struct file_operations pool_stats_operations = {
 static ssize_t write_svc(struct file *file, char *buf, size_t size)
 {
 	struct nfsctl_svc *data;
+	int err;
 	if (size < sizeof(*data))
 		return -EINVAL;
 	data = (struct nfsctl_svc*) buf;
-	return nfsd_svc(data->svc_port, data->svc_nthreads);
+	err = nfsd_svc(data->svc_port, data->svc_nthreads);
+	if (err < 0)
+		return err;
+	return 0;
 }
 
 /**
@@ -692,11 +696,12 @@ static ssize_t write_threads(struct file *file, char *buf, size_t size)
 		if (newthreads < 0)
 			return -EINVAL;
 		rv = nfsd_svc(NFS_PORT, newthreads);
-		if (rv)
+		if (rv < 0)
 			return rv;
-	}
-	sprintf(buf, "%d\n", nfsd_nrthreads());
-	return strlen(buf);
+	} else
+		rv = nfsd_nrthreads();
+
+	return scnprintf(buf, SIMPLE_TRANSACTION_LIMIT, "%d\n", rv);
 }
 
 /**
@@ -793,7 +798,7 @@ static ssize_t __write_versions(struct file *file, char *buf, size_t size)
 {
 	char *mesg = buf;
 	char *vers, *minorp, sign;
-	int len, num;
+	int len, num, remaining;
 	unsigned minor;
 	ssize_t tlen = 0;
 	char *sep;
@@ -840,32 +845,50 @@ static ssize_t __write_versions(struct file *file, char *buf, size_t size)
 			}
 		next:
 			vers += len + 1;
-			tlen += len;
 		} while ((len = qword_get(&mesg, vers, size)) > 0);
 		/* If all get turned off, turn them back on, as
 		 * having no versions is BAD
 		 */
 		nfsd_reset_versions();
 	}
+
 	/* Now write current state into reply buffer */
 	len = 0;
 	sep = "";
+	remaining = SIMPLE_TRANSACTION_LIMIT;
 	for (num=2 ; num <= 4 ; num++)
 		if (nfsd_vers(num, NFSD_AVAIL)) {
-			len += sprintf(buf+len, "%s%c%d", sep,
+			len = snprintf(buf, remaining, "%s%c%d", sep,
 				       nfsd_vers(num, NFSD_TEST)?'+':'-',
 				       num);
 			sep = " ";
+
+			if (len > remaining)
+				break;
+			remaining -= len;
+			buf += len;
+			tlen += len;
 		}
 	if (nfsd_vers(4, NFSD_AVAIL))
-		for (minor = 1; minor <= NFSD_SUPPORTED_MINOR_VERSION; minor++)
-			len += sprintf(buf+len, " %c4.%u",
+		for (minor = 1; minor <= NFSD_SUPPORTED_MINOR_VERSION;
+		     minor++) {
+			len = snprintf(buf, remaining, " %c4.%u",
 					(nfsd_vers(4, NFSD_TEST) &&
 					 nfsd_minorversion(minor, NFSD_TEST)) ?
 						'+' : '-',
 					minor);
-	len += sprintf(buf+len, "\n");
-	return len;
+
+			if (len > remaining)
+				break;
+			remaining -= len;
+			buf += len;
+			tlen += len;
+		}
+
+	len = snprintf(buf, remaining, "\n");
+	if (len > remaining)
+		return -EINVAL;
+	return tlen + len;
 }
 
 /**
@@ -910,104 +933,143 @@ static ssize_t write_versions(struct file *file, char *buf, size_t size)
 	return rv;
 }
 
-static ssize_t __write_ports(struct file *file, char *buf, size_t size)
+/*
+ * Zero-length write.  Return a list of NFSD's current listener
+ * transports.
+ */
+static ssize_t __write_ports_names(char *buf)
 {
-	if (size == 0) {
-		int len = 0;
+	if (nfsd_serv == NULL)
+		return 0;
+	return svc_xprt_names(nfsd_serv, buf, SIMPLE_TRANSACTION_LIMIT);
+}
 
-		if (nfsd_serv)
-			len = svc_xprt_names(nfsd_serv, buf, 0);
-		return len;
-	}
-	/* Either a single 'fd' number is written, in which
-	 * case it must be for a socket of a supported family/protocol,
-	 * and we use it as an nfsd socket, or
-	 * A '-' followed by the 'name' of a socket in which case
-	 * we close the socket.
-	 */
-	if (isdigit(buf[0])) {
-		char *mesg = buf;
-		int fd;
-		int err;
-		err = get_int(&mesg, &fd);
-		if (err)
-			return -EINVAL;
-		if (fd < 0)
-			return -EINVAL;
-		err = nfsd_create_serv();
-		if (!err) {
-			err = svc_addsock(nfsd_serv, fd, buf);
-			if (err >= 0) {
-				err = lockd_up();
-				if (err < 0)
-					svc_sock_names(buf+strlen(buf)+1, nfsd_serv, buf);
-			}
-			/* Decrease the count, but don't shutdown the
-			 * the service
-			 */
-			nfsd_serv->sv_nrthreads--;
-		}
-		return err < 0 ? err : 0;
-	}
-	if (buf[0] == '-' && isdigit(buf[1])) {
-		char *toclose = kstrdup(buf+1, GFP_KERNEL);
-		int len = 0;
-		if (!toclose)
-			return -ENOMEM;
-		if (nfsd_serv)
-			len = svc_sock_names(buf, nfsd_serv, toclose);
-		if (len >= 0)
-			lockd_down();
-		kfree(toclose);
-		return len;
-	}
-	/*
-	 * Add a transport listener by writing it's transport name
-	 */
-	if (isalpha(buf[0])) {
-		int err;
-		char transport[16];
-		int port;
-		if (sscanf(buf, "%15s %4d", transport, &port) == 2) {
-			if (port < 1 || port > 65535)
-				return -EINVAL;
-			err = nfsd_create_serv();
-			if (!err) {
-				err = svc_create_xprt(nfsd_serv,
-						      transport, PF_INET, port,
-						      SVC_SOCK_ANONYMOUS);
-				if (err == -ENOENT)
-					/* Give a reasonable perror msg for
-					 * bad transport string */
-					err = -EPROTONOSUPPORT;
-			}
-			return err < 0 ? err : 0;
-		}
-	}
-	/*
-	 * Remove a transport by writing it's transport name and port number
-	 */
-	if (buf[0] == '-' && isalpha(buf[1])) {
-		struct svc_xprt *xprt;
-		int err = -EINVAL;
-		char transport[16];
-		int port;
-		if (sscanf(&buf[1], "%15s %4d", transport, &port) == 2) {
-			if (port < 1 || port > 65535)
-				return -EINVAL;
-			if (nfsd_serv) {
-				xprt = svc_find_xprt(nfsd_serv, transport,
-						     AF_UNSPEC, port);
-				if (xprt) {
-					svc_close_xprt(xprt);
-					svc_xprt_put(xprt);
-					err = 0;
-				} else
-					err = -ENOTCONN;
-			}
-			return err < 0 ? err : 0;
-		}
+/*
+ * A single 'fd' number was written, in which case it must be for
+ * a socket of a supported family/protocol, and we use it as an
+ * nfsd listener.
+ */
+static ssize_t __write_ports_addfd(char *buf)
+{
+	char *mesg = buf;
+	int fd, err;
+
+	err = get_int(&mesg, &fd);
+	if (err != 0 || fd < 0)
+		return -EINVAL;
+
+	err = nfsd_create_serv();
+	if (err != 0)
+		return err;
+
+	err = lockd_up();
+	if (err != 0)
+		goto out;
+
+	err = svc_addsock(nfsd_serv, fd, buf, SIMPLE_TRANSACTION_LIMIT);
+	if (err < 0)
+		lockd_down();
+
+out:
+	/* Decrease the count, but don't shut down the service */
+	nfsd_serv->sv_nrthreads--;
+	return err;
+}
+
+/*
+ * A '-' followed by the 'name' of a socket means we close the socket.
+ */
+static ssize_t __write_ports_delfd(char *buf)
+{
+	char *toclose;
+	int len = 0;
+
+	toclose = kstrdup(buf + 1, GFP_KERNEL);
+	if (toclose == NULL)
+		return -ENOMEM;
+
+	if (nfsd_serv != NULL)
+		len = svc_sock_names(nfsd_serv, buf,
+					SIMPLE_TRANSACTION_LIMIT, toclose);
+	if (len >= 0)
+		lockd_down();
+
+	kfree(toclose);
+	return len;
+}
+
+/*
+ * A transport listener is added by writing it's transport name and
+ * a port number.
+ */
+static ssize_t __write_ports_addxprt(char *buf)
+{
+	char transport[16];
+	int port, err;
+
+	if (sscanf(buf, "%15s %4u", transport, &port) != 2)
+		return -EINVAL;
+
+	if (port < 1 || port > USHORT_MAX)
+		return -EINVAL;
+
+	err = nfsd_create_serv();
+	if (err != 0)
+		return err;
+
+	err = svc_create_xprt(nfsd_serv, transport,
+				PF_INET, port, SVC_SOCK_ANONYMOUS);
+	if (err < 0) {
+		/* Give a reasonable perror msg for bad transport string */
+		if (err == -ENOENT)
+			err = -EPROTONOSUPPORT;
+		return err;
 	}
+	return 0;
+}
+
+/*
+ * A transport listener is removed by writing a "-", it's transport
+ * name, and it's port number.
+ */
+static ssize_t __write_ports_delxprt(char *buf)
+{
+	struct svc_xprt *xprt;
+	char transport[16];
+	int port;
+
+	if (sscanf(&buf[1], "%15s %4u", transport, &port) != 2)
+		return -EINVAL;
+
+	if (port < 1 || port > USHORT_MAX || nfsd_serv == NULL)
+		return -EINVAL;
+
+	xprt = svc_find_xprt(nfsd_serv, transport, AF_UNSPEC, port);
+	if (xprt == NULL)
+		return -ENOTCONN;
+
+	svc_close_xprt(xprt);
+	svc_xprt_put(xprt);
+	return 0;
+}
+
+static ssize_t __write_ports(struct file *file, char *buf, size_t size)
+{
+	if (size == 0)
+		return __write_ports_names(buf);
+
+	if (isdigit(buf[0]))
+		return __write_ports_addfd(buf);
+
+	if (buf[0] == '-' && isdigit(buf[1]))
+		return __write_ports_delfd(buf);
+
+	if (isalpha(buf[0]))
+		return __write_ports_addxprt(buf);
+
+	if (buf[0] == '-' && isalpha(buf[1]))
+		return __write_ports_delxprt(buf);
+
 	return -EINVAL;
 }
 
@@ -1030,7 +1092,9 @@ static ssize_t __write_ports(struct file *file, char *buf, size_t size)
  *			buf:		C string containing an unsigned
  *					integer value representing a bound
  *					but unconnected socket that is to be
- *					used as an NFSD listener
+ *					used as an NFSD listener; listen(3)
+ *					must be called for a SOCK_STREAM
+ *					socket, otherwise it is ignored
  *			size:		non-zero length of C string in @buf
  * Output:
  *	On success:	NFS service is started;
@@ -1138,7 +1202,9 @@ static ssize_t write_maxblksize(struct file *file, char *buf, size_t size)
 		nfsd_max_blksize = bsize;
 		mutex_unlock(&nfsd_mutex);
 	}
-	return sprintf(buf, "%d\n", nfsd_max_blksize);
+
+	return scnprintf(buf, SIMPLE_TRANSACTION_LIMIT, "%d\n",
+							nfsd_max_blksize);
 }
 
 #ifdef CONFIG_NFSD_V4
@@ -1162,8 +1228,9 @@ static ssize_t __write_leasetime(struct file *file, char *buf, size_t size)
 			return -EINVAL;
 		nfs4_reset_lease(lease);
 	}
-	sprintf(buf, "%ld\n", nfs4_lease_time());
-	return strlen(buf);
+
+	return scnprintf(buf, SIMPLE_TRANSACTION_LIMIT, "%ld\n",
+							nfs4_lease_time());
 }
 
 /**
@@ -1219,8 +1286,9 @@ static ssize_t __write_recoverydir(struct file *file, char *buf, size_t size)
 
 		status = nfs4_reset_recoverydir(recdir);
 	}
-	sprintf(buf, "%s\n", nfs4_recoverydir());
-	return strlen(buf);
+
+	return scnprintf(buf, SIMPLE_TRANSACTION_LIMIT, "%s\n",
+							nfs4_recoverydir());
 }
 
 /**
diff --git a/fs/nfsd/nfsfh.c b/fs/nfsd/nfsfh.c
index 9f1ca17293d..8847f3fbfc1 100644
--- a/fs/nfsd/nfsfh.c
+++ b/fs/nfsd/nfsfh.c
@@ -27,9 +27,6 @@
 #define NFSDDBG_FACILITY		NFSDDBG_FH
 
 
-static int nfsd_nr_verified;
-static int nfsd_nr_put;
-
 /*
  * our acceptability function.
  * if NOSUBTREECHECK, accept anything
@@ -251,7 +248,6 @@ static __be32 nfsd_set_fh_dentry(struct svc_rqst *rqstp, struct svc_fh *fhp)
 
 	fhp->fh_dentry = dentry;
 	fhp->fh_export = exp;
-	nfsd_nr_verified++;
 	return 0;
 out:
 	exp_put(exp);
@@ -552,7 +548,6 @@ fh_compose(struct svc_fh *fhp, struct svc_export *exp, struct dentry *dentry,
 			return nfserr_opnotsupp;
 	}
 
-	nfsd_nr_verified++;
 	return 0;
 }
 
@@ -609,7 +604,6 @@ fh_put(struct svc_fh *fhp)
 		fhp->fh_pre_saved = 0;
 		fhp->fh_post_saved = 0;
 #endif
-		nfsd_nr_put++;
 	}
 	if (exp) {
 		cache_put(&exp->h, &svc_export_cache);
diff --git a/fs/nfsd/nfsproc.c b/fs/nfsd/nfsproc.c
index e298e260b5f..0eb9c820b7a 100644
--- a/fs/nfsd/nfsproc.c
+++ b/fs/nfsd/nfsproc.c
@@ -533,45 +533,179 @@ nfsd_proc_statfs(struct svc_rqst * rqstp, struct nfsd_fhandle   *argp,
  * NFSv2 Server procedures.
  * Only the results of non-idempotent operations are cached.
  */
-#define nfsd_proc_none		NULL
-#define nfssvc_release_none	NULL
 struct nfsd_void { int dummy; };
 
-#define PROC(name, argt, rest, relt, cache, respsize)	\
- { (svc_procfunc) nfsd_proc_##name,		\
-   (kxdrproc_t) nfssvc_decode_##argt,		\
-   (kxdrproc_t) nfssvc_encode_##rest,		\
-   (kxdrproc_t) nfssvc_release_##relt,		\
-   sizeof(struct nfsd_##argt),			\
-   sizeof(struct nfsd_##rest),			\
-   0,						\
-   cache,					\
-   respsize,				       	\
- }
-
 #define ST 1		/* status */
 #define FH 8		/* filehandle */
 #define	AT 18		/* attributes */
 
 static struct svc_procedure		nfsd_procedures2[18] = {
-  PROC(null,	 void,		void,		none,		RC_NOCACHE, ST),
-  PROC(getattr,	 fhandle,	attrstat,	fhandle,	RC_NOCACHE, ST+AT),
-  PROC(setattr,  sattrargs,	attrstat,	fhandle,	RC_REPLBUFF, ST+AT),
-  PROC(none,	 void,		void,		none,		RC_NOCACHE, ST),
-  PROC(lookup,	 diropargs,	diropres,	fhandle,	RC_NOCACHE, ST+FH+AT),
-  PROC(readlink, readlinkargs,	readlinkres,	none,		RC_NOCACHE, ST+1+NFS_MAXPATHLEN/4),
-  PROC(read,	 readargs,	readres,	fhandle,	RC_NOCACHE, ST+AT+1+NFSSVC_MAXBLKSIZE_V2/4),
-  PROC(none,	 void,		void,		none,		RC_NOCACHE, ST),
-  PROC(write,	 writeargs,	attrstat,	fhandle,	RC_REPLBUFF, ST+AT),
-  PROC(create,	 createargs,	diropres,	fhandle,	RC_REPLBUFF, ST+FH+AT),
-  PROC(remove,	 diropargs,	void,		none,		RC_REPLSTAT, ST),
-  PROC(rename,	 renameargs,	void,		none,		RC_REPLSTAT, ST),
-  PROC(link,	 linkargs,	void,		none,		RC_REPLSTAT, ST),
-  PROC(symlink,	 symlinkargs,	void,		none,		RC_REPLSTAT, ST),
-  PROC(mkdir,	 createargs,	diropres,	fhandle,	RC_REPLBUFF, ST+FH+AT),
-  PROC(rmdir,	 diropargs,	void,		none,		RC_REPLSTAT, ST),
-  PROC(readdir,	 readdirargs,	readdirres,	none,		RC_NOCACHE, 0),
-  PROC(statfs,	 fhandle,	statfsres,	none,		RC_NOCACHE, ST+5),
+	[NFSPROC_NULL] = {
+		.pc_func = (svc_procfunc) nfsd_proc_null,
+		.pc_decode = (kxdrproc_t) nfssvc_decode_void,
+		.pc_encode = (kxdrproc_t) nfssvc_encode_void,
+		.pc_argsize = sizeof(struct nfsd_void),
+		.pc_ressize = sizeof(struct nfsd_void),
+		.pc_cachetype = RC_NOCACHE,
+		.pc_xdrressize = ST,
+	},
+	[NFSPROC_GETATTR] = {
+		.pc_func = (svc_procfunc) nfsd_proc_getattr,
+		.pc_decode = (kxdrproc_t) nfssvc_decode_fhandle,
+		.pc_encode = (kxdrproc_t) nfssvc_encode_attrstat,
+		.pc_release = (kxdrproc_t) nfssvc_release_fhandle,
+		.pc_argsize = sizeof(struct nfsd_fhandle),
+		.pc_ressize = sizeof(struct nfsd_attrstat),
+		.pc_cachetype = RC_NOCACHE,
+		.pc_xdrressize = ST+AT,
+	},
+	[NFSPROC_SETATTR] = {
+		.pc_func = (svc_procfunc) nfsd_proc_setattr,
+		.pc_decode = (kxdrproc_t) nfssvc_decode_sattrargs,
+		.pc_encode = (kxdrproc_t) nfssvc_encode_attrstat,
+		.pc_release = (kxdrproc_t) nfssvc_release_fhandle,
+		.pc_argsize = sizeof(struct nfsd_sattrargs),
+		.pc_ressize = sizeof(struct nfsd_attrstat),
+		.pc_cachetype = RC_REPLBUFF,
+		.pc_xdrressize = ST+AT,
+	},
+	[NFSPROC_ROOT] = {
+		.pc_decode = (kxdrproc_t) nfssvc_decode_void,
+		.pc_encode = (kxdrproc_t) nfssvc_encode_void,
+		.pc_argsize = sizeof(struct nfsd_void),
+		.pc_ressize = sizeof(struct nfsd_void),
+		.pc_cachetype = RC_NOCACHE,
+		.pc_xdrressize = ST,
+	},
+	[NFSPROC_LOOKUP] = {
+		.pc_func = (svc_procfunc) nfsd_proc_lookup,
+		.pc_decode = (kxdrproc_t) nfssvc_decode_diropargs,
+		.pc_encode = (kxdrproc_t) nfssvc_encode_diropres,
+		.pc_release = (kxdrproc_t) nfssvc_release_fhandle,
+		.pc_argsize = sizeof(struct nfsd_diropargs),
+		.pc_ressize = sizeof(struct nfsd_diropres),
+		.pc_cachetype = RC_NOCACHE,
+		.pc_xdrressize = ST+FH+AT,
+	},
+	[NFSPROC_READLINK] = {
+		.pc_func = (svc_procfunc) nfsd_proc_readlink,
+		.pc_decode = (kxdrproc_t) nfssvc_decode_readlinkargs,
+		.pc_encode = (kxdrproc_t) nfssvc_encode_readlinkres,
+		.pc_argsize = sizeof(struct nfsd_readlinkargs),
+		.pc_ressize = sizeof(struct nfsd_readlinkres),
+		.pc_cachetype = RC_NOCACHE,
+		.pc_xdrressize = ST+1+NFS_MAXPATHLEN/4,
+	},
+	[NFSPROC_READ] = {
+		.pc_func = (svc_procfunc) nfsd_proc_read,
+		.pc_decode = (kxdrproc_t) nfssvc_decode_readargs,
+		.pc_encode = (kxdrproc_t) nfssvc_encode_readres,
+		.pc_release = (kxdrproc_t) nfssvc_release_fhandle,
+		.pc_argsize = sizeof(struct nfsd_readargs),
+		.pc_ressize = sizeof(struct nfsd_readres),
+		.pc_cachetype = RC_NOCACHE,
+		.pc_xdrressize = ST+AT+1+NFSSVC_MAXBLKSIZE_V2/4,
+	},
+	[NFSPROC_WRITECACHE] = {
+		.pc_decode = (kxdrproc_t) nfssvc_decode_void,
+		.pc_encode = (kxdrproc_t) nfssvc_encode_void,
+		.pc_argsize = sizeof(struct nfsd_void),
+		.pc_ressize = sizeof(struct nfsd_void),
+		.pc_cachetype = RC_NOCACHE,
+		.pc_xdrressize = ST,
+	},
+	[NFSPROC_WRITE] = {
+		.pc_func = (svc_procfunc) nfsd_proc_write,
+		.pc_decode = (kxdrproc_t) nfssvc_decode_writeargs,
+		.pc_encode = (kxdrproc_t) nfssvc_encode_attrstat,
+		.pc_release = (kxdrproc_t) nfssvc_release_fhandle,
+		.pc_argsize = sizeof(struct nfsd_writeargs),
+		.pc_ressize = sizeof(struct nfsd_attrstat),
+		.pc_cachetype = RC_REPLBUFF,
+		.pc_xdrressize = ST+AT,
+	},
+	[NFSPROC_CREATE] = {
+		.pc_func = (svc_procfunc) nfsd_proc_create,
+		.pc_decode = (kxdrproc_t) nfssvc_decode_createargs,
+		.pc_encode = (kxdrproc_t) nfssvc_encode_diropres,
+		.pc_release = (kxdrproc_t) nfssvc_release_fhandle,
+		.pc_argsize = sizeof(struct nfsd_createargs),
+		.pc_ressize = sizeof(struct nfsd_diropres),
+		.pc_cachetype = RC_REPLBUFF,
+		.pc_xdrressize = ST+FH+AT,
+	},
+	[NFSPROC_REMOVE] = {
+		.pc_func = (svc_procfunc) nfsd_proc_remove,
+		.pc_decode = (kxdrproc_t) nfssvc_decode_diropargs,
+		.pc_encode = (kxdrproc_t) nfssvc_encode_void,
+		.pc_argsize = sizeof(struct nfsd_diropargs),
+		.pc_ressize = sizeof(struct nfsd_void),
+		.pc_cachetype = RC_REPLSTAT,
+		.pc_xdrressize = ST,
+	},
+	[NFSPROC_RENAME] = {
+		.pc_func = (svc_procfunc) nfsd_proc_rename,
+		.pc_decode = (kxdrproc_t) nfssvc_decode_renameargs,
+		.pc_encode = (kxdrproc_t) nfssvc_encode_void,
+		.pc_argsize = sizeof(struct nfsd_renameargs),
+		.pc_ressize = sizeof(struct nfsd_void),
+		.pc_cachetype = RC_REPLSTAT,
+		.pc_xdrressize = ST,
+	},
+	[NFSPROC_LINK] = {
+		.pc_func = (svc_procfunc) nfsd_proc_link,
+		.pc_decode = (kxdrproc_t) nfssvc_decode_linkargs,
+		.pc_encode = (kxdrproc_t) nfssvc_encode_void,
+		.pc_argsize = sizeof(struct nfsd_linkargs),
+		.pc_ressize = sizeof(struct nfsd_void),
+		.pc_cachetype = RC_REPLSTAT,
+		.pc_xdrressize = ST,
+	},
+	[NFSPROC_SYMLINK] = {
+		.pc_func = (svc_procfunc) nfsd_proc_symlink,
+		.pc_decode = (kxdrproc_t) nfssvc_decode_symlinkargs,
+		.pc_encode = (kxdrproc_t) nfssvc_encode_void,
+		.pc_argsize = sizeof(struct nfsd_symlinkargs),
+		.pc_ressize = sizeof(struct nfsd_void),
+		.pc_cachetype = RC_REPLSTAT,
+		.pc_xdrressize = ST,
+	},
+	[NFSPROC_MKDIR] = {
+		.pc_func = (svc_procfunc) nfsd_proc_mkdir,
+		.pc_decode = (kxdrproc_t) nfssvc_decode_createargs,
+		.pc_encode = (kxdrproc_t) nfssvc_encode_diropres,
+		.pc_release = (kxdrproc_t) nfssvc_release_fhandle,
+		.pc_argsize = sizeof(struct nfsd_createargs),
+		.pc_ressize = sizeof(struct nfsd_diropres),
+		.pc_cachetype = RC_REPLBUFF,
+		.pc_xdrressize = ST+FH+AT,
+	},
+	[NFSPROC_RMDIR] = {
+		.pc_func = (svc_procfunc) nfsd_proc_rmdir,
+		.pc_decode = (kxdrproc_t) nfssvc_decode_diropargs,
+		.pc_encode = (kxdrproc_t) nfssvc_encode_void,
+		.pc_argsize = sizeof(struct nfsd_diropargs),
+		.pc_ressize = sizeof(struct nfsd_void),
+		.pc_cachetype = RC_REPLSTAT,
+		.pc_xdrressize = ST,
+	},
+	[NFSPROC_READDIR] = {
+		.pc_func = (svc_procfunc) nfsd_proc_readdir,
+		.pc_decode = (kxdrproc_t) nfssvc_decode_readdirargs,
+		.pc_encode = (kxdrproc_t) nfssvc_encode_readdirres,
+		.pc_argsize = sizeof(struct nfsd_readdirargs),
+		.pc_ressize = sizeof(struct nfsd_readdirres),
+		.pc_cachetype = RC_NOCACHE,
+	},
+	[NFSPROC_STATFS] = {
+		.pc_func = (svc_procfunc) nfsd_proc_statfs,
+		.pc_decode = (kxdrproc_t) nfssvc_decode_fhandle,
+		.pc_encode = (kxdrproc_t) nfssvc_encode_statfsres,
+		.pc_argsize = sizeof(struct nfsd_fhandle),
+		.pc_ressize = sizeof(struct nfsd_statfsres),
+		.pc_cachetype = RC_NOCACHE,
+		.pc_xdrressize = ST+5,
+	},
 };
 
 
diff --git a/fs/nfsd/nfssvc.c b/fs/nfsd/nfssvc.c
index cbba4a93578..d4c9884cd54 100644
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -390,12 +390,14 @@ nfsd_svc(unsigned short port, int nrservs)
 
 	mutex_lock(&nfsd_mutex);
 	dprintk("nfsd: creating service\n");
-	error = -EINVAL;
 	if (nrservs <= 0)
 		nrservs = 0;
 	if (nrservs > NFSD_MAXSERVS)
 		nrservs = NFSD_MAXSERVS;
-	
+	error = 0;
+	if (nrservs == 0 && nfsd_serv == NULL)
+		goto out;
+
 	/* Readahead param cache - will no-op if it already exists */
 	error =	nfsd_racache_init(2*nrservs);
 	if (error<0)
@@ -413,6 +415,12 @@ nfsd_svc(unsigned short port, int nrservs)
 		goto failure;
 
 	error = svc_set_num_threads(nfsd_serv, NULL, nrservs);
+	if (error == 0)
+		/* We are holding a reference to nfsd_serv which
+		 * we don't want to count in the return value,
+		 * so subtract 1
+		 */
+		error = nfsd_serv->sv_nrthreads - 1;
  failure:
 	svc_destroy(nfsd_serv);		/* Release server */
  out:
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 99f83575359..4145083dcf8 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -966,6 +966,43 @@ static void kill_suid(struct dentry *dentry)
 	mutex_unlock(&dentry->d_inode->i_mutex);
 }
 
+/*
+ * Gathered writes: If another process is currently writing to the file,
+ * there's a high chance this is another nfsd (triggered by a bulk write
+ * from a client's biod). Rather than syncing the file with each write
+ * request, we sleep for 10 msec.
+ *
+ * I don't know if this roughly approximates C. Juszak's idea of
+ * gathered writes, but it's a nice and simple solution (IMHO), and it
+ * seems to work:-)
+ *
+ * Note: we do this only in the NFSv2 case, since v3 and higher have a
+ * better tool (separate unstable writes and commits) for solving this
+ * problem.
+ */
+static int wait_for_concurrent_writes(struct file *file)
+{
+	struct inode *inode = file->f_path.dentry->d_inode;
+	static ino_t last_ino;
+	static dev_t last_dev;
+	int err = 0;
+
+	if (atomic_read(&inode->i_writecount) > 1
+	    || (last_ino == inode->i_ino && last_dev == inode->i_sb->s_dev)) {
+		dprintk("nfsd: write defer %d\n", task_pid_nr(current));
+		msleep(10);
+		dprintk("nfsd: write resume %d\n", task_pid_nr(current));
+	}
+
+	if (inode->i_state & I_DIRTY) {
+		dprintk("nfsd: write sync %d\n", task_pid_nr(current));
+		err = nfsd_sync(file);
+	}
+	last_ino = inode->i_ino;
+	last_dev = inode->i_sb->s_dev;
+	return err;
+}
+
 static __be32
 nfsd_vfs_write(struct svc_rqst *rqstp, struct svc_fh *fhp, struct file *file,
 				loff_t offset, struct kvec *vec, int vlen,
@@ -978,6 +1015,7 @@ nfsd_vfs_write(struct svc_rqst *rqstp, struct svc_fh *fhp, struct file *file,
 	__be32			err = 0;
 	int			host_err;
 	int			stable = *stablep;
+	int			use_wgather;
 
 #ifdef MSNFS
 	err = nfserr_perm;
@@ -996,9 +1034,10 @@ nfsd_vfs_write(struct svc_rqst *rqstp, struct svc_fh *fhp, struct file *file,
 	 *  -	the sync export option has been set, or
 	 *  -	the client requested O_SYNC behavior (NFSv3 feature).
 	 *  -   The file system doesn't support fsync().
-	 * When gathered writes have been configured for this volume,
+	 * When NFSv2 gathered writes have been configured for this volume,
 	 * flushing the data to disk is handled separately below.
 	 */
+	use_wgather = (rqstp->rq_vers == 2) && EX_WGATHER(exp);
 
 	if (!file->f_op->fsync) {/* COMMIT3 cannot work */
 	       stable = 2;
@@ -1007,7 +1046,7 @@ nfsd_vfs_write(struct svc_rqst *rqstp, struct svc_fh *fhp, struct file *file,
 
 	if (!EX_ISSYNC(exp))
 		stable = 0;
-	if (stable && !EX_WGATHER(exp)) {
+	if (stable && !use_wgather) {
 		spin_lock(&file->f_lock);
 		file->f_flags |= O_SYNC;
 		spin_unlock(&file->f_lock);
@@ -1017,52 +1056,20 @@ nfsd_vfs_write(struct svc_rqst *rqstp, struct svc_fh *fhp, struct file *file,
 	oldfs = get_fs(); set_fs(KERNEL_DS);
 	host_err = vfs_writev(file, (struct iovec __user *)vec, vlen, &offset);
 	set_fs(oldfs);
-	if (host_err >= 0) {
-		*cnt = host_err;
-		nfsdstats.io_write += host_err;
-		fsnotify_modify(file->f_path.dentry);
-	}
+	if (host_err < 0)
+		goto out_nfserr;
+	*cnt = host_err;
+	nfsdstats.io_write += host_err;
+	fsnotify_modify(file->f_path.dentry);
 
 	/* clear setuid/setgid flag after write */
-	if (host_err >= 0 && (inode->i_mode & (S_ISUID | S_ISGID)))
+	if (inode->i_mode & (S_ISUID | S_ISGID))
 		kill_suid(dentry);
 
-	if (host_err >= 0 && stable) {
-		static ino_t	last_ino;
-		static dev_t	last_dev;
-
-		/*
-		 * Gathered writes: If another process is currently
-		 * writing to the file, there's a high chance
-		 * this is another nfsd (triggered by a bulk write
-		 * from a client's biod). Rather than syncing the
-		 * file with each write request, we sleep for 10 msec.
-		 *
-		 * I don't know if this roughly approximates
-		 * C. Juszak's idea of gathered writes, but it's a
-		 * nice and simple solution (IMHO), and it seems to
-		 * work:-)
-		 */
-		if (EX_WGATHER(exp)) {
-			if (atomic_read(&inode->i_writecount) > 1
-			    || (last_ino == inode->i_ino && last_dev == inode->i_sb->s_dev)) {
-				dprintk("nfsd: write defer %d\n", task_pid_nr(current));
-				msleep(10);
-				dprintk("nfsd: write resume %d\n", task_pid_nr(current));
-			}
-
-			if (inode->i_state & I_DIRTY) {
-				dprintk("nfsd: write sync %d\n", task_pid_nr(current));
-				host_err=nfsd_sync(file);
-			}
-#if 0
-			wake_up(&inode->i_wait);
-#endif
-		}
-		last_ino = inode->i_ino;
-		last_dev = inode->i_sb->s_dev;
-	}
+	if (stable && use_wgather)
+		host_err = wait_for_concurrent_writes(file);
 
+out_nfserr:
 	dprintk("nfsd: write complete host_err=%d\n", host_err);
 	if (host_err >= 0)
 		err = 0;
diff --git a/fs/notify/inotify/inotify.h b/fs/notify/inotify/inotify.h
index ea2605a58b8..f234f3a4c8c 100644
--- a/fs/notify/inotify/inotify.h
+++ b/fs/notify/inotify/inotify.h
@@ -15,7 +15,8 @@ struct inotify_inode_mark_entry {
 	int wd;
 };
 
-extern void inotify_destroy_mark_entry(struct fsnotify_mark_entry *entry, struct fsnotify_group *group);
+extern void inotify_ignored_and_remove_idr(struct fsnotify_mark_entry *entry,
+					   struct fsnotify_group *group);
 extern void inotify_free_event_priv(struct fsnotify_event_private_data *event_priv);
 
 extern const struct fsnotify_ops inotify_fsnotify_ops;
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index 7ef75b83247..47cd258fd24 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -81,7 +81,7 @@ static int inotify_handle_event(struct fsnotify_group *group, struct fsnotify_ev
 
 static void inotify_freeing_mark(struct fsnotify_mark_entry *entry, struct fsnotify_group *group)
 {
-	inotify_destroy_mark_entry(entry, group);
+	inotify_ignored_and_remove_idr(entry, group);
 }
 
 static bool inotify_should_send_event(struct fsnotify_group *group, struct inode *inode, __u32 mask)
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index 982a412ac5b..ff231ad2389 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -363,39 +363,17 @@ static int inotify_find_inode(const char __user *dirname, struct path *path, uns
 }
 
 /*
- * When, for whatever reason, inotify is done with a mark (or what used to be a
- * watch) we need to remove that watch from the idr and we need to send IN_IGNORED
- * for the given wd.
- *
- * There is a bit of recursion here.  The loop looks like:
- * 	inotify_destroy_mark_entry -> fsnotify_destroy_mark_by_entry ->
- *	inotify_freeing_mark -> inotify_destory_mark_entry -> restart
- * But the loop is broken in 2 places.  fsnotify_destroy_mark_by_entry sets
- * entry->group = NULL before the call to inotify_freeing_mark, so the if (egroup)
- * test below will not call back to fsnotify again.  But even if that test wasn't
- * there this would still be safe since fsnotify_destroy_mark_by_entry() is
- * safe from recursion.
+ * Send IN_IGNORED for this wd, remove this wd from the idr, and drop the
+ * internal reference help on the mark because it is in the idr.
  */
-void inotify_destroy_mark_entry(struct fsnotify_mark_entry *entry, struct fsnotify_group *group)
+void inotify_ignored_and_remove_idr(struct fsnotify_mark_entry *entry,
+				    struct fsnotify_group *group)
 {
 	struct inotify_inode_mark_entry *ientry;
 	struct inotify_event_private_data *event_priv;
 	struct fsnotify_event_private_data *fsn_event_priv;
-	struct fsnotify_group *egroup;
 	struct idr *idr;
 
-	spin_lock(&entry->lock);
-	egroup = entry->group;
-
-	/* if egroup we aren't really done and something might still send events
-	 * for this inode, on the callback we'll send the IN_IGNORED */
-	if (egroup) {
-		spin_unlock(&entry->lock);
-		fsnotify_destroy_mark_by_entry(entry);
-		return;
-	}
-	spin_unlock(&entry->lock);
-
 	ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
 
 	event_priv = kmem_cache_alloc(event_priv_cachep, GFP_KERNEL);
@@ -699,7 +677,7 @@ SYSCALL_DEFINE2(inotify_rm_watch, int, fd, __s32, wd)
 	fsnotify_get_mark(entry);
 	spin_unlock(&group->inotify_data.idr_lock);
 
-	inotify_destroy_mark_entry(entry, group);
+	fsnotify_destroy_mark_by_entry(entry);
 	fsnotify_put_mark(entry);
 
 out:
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 0746e1abdfc..7efb349fb9b 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -558,7 +558,7 @@ static unsigned long long ocfs2_max_file_offset(unsigned int bbits,
 	 */
 
 #if BITS_PER_LONG == 32
-# if defined(CONFIG_LBD)
+# if defined(CONFIG_LBDAF)
 	BUILD_BUG_ON(sizeof(sector_t) != 8);
 	/*
 	 * We might be limited by page cache size.
diff --git a/fs/proc/Makefile b/fs/proc/Makefile
index 63d965193b2..11a7b5c6815 100644
--- a/fs/proc/Makefile
+++ b/fs/proc/Makefile
@@ -18,6 +18,7 @@ proc-y	+= meminfo.o
 proc-y	+= stat.o
 proc-y	+= uptime.o
 proc-y	+= version.o
+proc-y	+= softirqs.o
 proc-$(CONFIG_PROC_SYSCTL)	+= proc_sysctl.o
 proc-$(CONFIG_NET)		+= proc_net.o
 proc-$(CONFIG_PROC_KCORE)	+= kcore.o
diff --git a/fs/proc/proc_devtree.c b/fs/proc/proc_devtree.c
index fc6c3025bef..7ba79a54948 100644
--- a/fs/proc/proc_devtree.c
+++ b/fs/proc/proc_devtree.c
@@ -195,20 +195,20 @@ void proc_device_tree_add_node(struct device_node *np,
 			p = fixup_name(np, de, p);
 
 		ent = proc_mkdir(p, de);
-		if (ent == 0)
+		if (ent == NULL)
 			break;
 		proc_device_tree_add_node(child, ent);
 	}
 	of_node_put(child);
 
-	for (pp = np->properties; pp != 0; pp = pp->next) {
+	for (pp = np->properties; pp != NULL; pp = pp->next) {
 		p = pp->name;
 
 		if (duplicate_name(de, p))
 			p = fixup_name(np, de, p);
 
 		ent = __proc_device_tree_add_prop(de, pp, p);
-		if (ent == 0)
+		if (ent == NULL)
 			break;
 	}
 }
@@ -221,10 +221,10 @@ void __init proc_device_tree_init(void)
 	struct device_node *root;
 
 	proc_device_tree = proc_mkdir("device-tree", NULL);
-	if (proc_device_tree == 0)
+	if (proc_device_tree == NULL)
 		return;
 	root = of_find_node_by_path("/");
-	if (root == 0) {
+	if (root == NULL) {
 		printk(KERN_ERR "/proc/device-tree: can't find root\n");
 		return;
 	}
diff --git a/fs/proc/softirqs.c b/fs/proc/softirqs.c
new file mode 100644
index 00000000000..1807c2419f1
--- /dev/null
+++ b/fs/proc/softirqs.c
@@ -0,0 +1,44 @@
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+
+/*
+ * /proc/softirqs  ... display the number of softirqs
+ */
+static int show_softirqs(struct seq_file *p, void *v)
+{
+	int i, j;
+
+	seq_printf(p, "                ");
+	for_each_possible_cpu(i)
+		seq_printf(p, "CPU%-8d", i);
+	seq_printf(p, "\n");
+
+	for (i = 0; i < NR_SOFTIRQS; i++) {
+		seq_printf(p, "%8s:", softirq_to_name[i]);
+		for_each_possible_cpu(j)
+			seq_printf(p, " %10u", kstat_softirqs_cpu(i, j));
+		seq_printf(p, "\n");
+	}
+	return 0;
+}
+
+static int softirqs_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, show_softirqs, NULL);
+}
+
+static const struct file_operations proc_softirqs_operations = {
+	.open		= softirqs_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init proc_softirqs_init(void)
+{
+	proc_create("softirqs", 0, NULL, &proc_softirqs_operations);
+	return 0;
+}
+module_init(proc_softirqs_init);
diff --git a/fs/proc/stat.c b/fs/proc/stat.c
index 81e4eb60972..7cc726c6d70 100644
--- a/fs/proc/stat.c
+++ b/fs/proc/stat.c
@@ -29,6 +29,8 @@ static int show_stat(struct seq_file *p, void *v)
 	cputime64_t user, nice, system, idle, iowait, irq, softirq, steal;
 	cputime64_t guest;
 	u64 sum = 0;
+	u64 sum_softirq = 0;
+	unsigned int per_softirq_sums[NR_SOFTIRQS] = {0};
 	struct timespec boottime;
 	unsigned int per_irq_sum;
 
@@ -53,6 +55,13 @@ static int show_stat(struct seq_file *p, void *v)
 			sum += kstat_irqs_cpu(j, i);
 		}
 		sum += arch_irq_stat_cpu(i);
+
+		for (j = 0; j < NR_SOFTIRQS; j++) {
+			unsigned int softirq_stat = kstat_softirqs_cpu(j, i);
+
+			per_softirq_sums[j] += softirq_stat;
+			sum_softirq += softirq_stat;
+		}
 	}
 	sum += arch_irq_stat();
 
@@ -115,6 +124,12 @@ static int show_stat(struct seq_file *p, void *v)
 		nr_running(),
 		nr_iowait());
 
+	seq_printf(p, "softirq %llu", (unsigned long long)sum_softirq);
+
+	for (i = 0; i < NR_SOFTIRQS; i++)
+		seq_printf(p, " %u", per_softirq_sums[i]);
+	seq_printf(p, "\n");
+
 	return 0;
 }
 
diff --git a/fs/proc/vmcore.c b/fs/proc/vmcore.c
index 5edcc3f92ba..0872afa58d3 100644
--- a/fs/proc/vmcore.c
+++ b/fs/proc/vmcore.c
@@ -166,12 +166,7 @@ static const struct file_operations proc_vmcore_operations = {
 
 static struct vmcore* __init get_new_element(void)
 {
-	struct vmcore *p;
-
-	p = kmalloc(sizeof(*p), GFP_KERNEL);
-	if (p)
-		memset(p, 0, sizeof(*p));
-	return p;
+	return kzalloc(sizeof(struct vmcore), GFP_KERNEL);
 }
 
 static u64 __init get_vmcore_size_elf64(char *elfptr)
diff --git a/fs/reiserfs/do_balan.c b/fs/reiserfs/do_balan.c
index 4beb964a2a3..128d3f7c8aa 100644
--- a/fs/reiserfs/do_balan.c
+++ b/fs/reiserfs/do_balan.c
@@ -1270,9 +1270,8 @@ static int balance_leaf(struct tree_balance *tb, struct item_head *ih,	/* item h
 
 					RFALSE(ih, "PAP-12210: ih must be 0");
 
-					if (is_direntry_le_ih
-					    (aux_ih =
-					     B_N_PITEM_HEAD(tbS0, item_pos))) {
+					aux_ih = B_N_PITEM_HEAD(tbS0, item_pos);
+					if (is_direntry_le_ih(aux_ih)) {
 						/* we append to directory item */
 
 						int entry_count;
diff --git a/fs/reiserfs/lbalance.c b/fs/reiserfs/lbalance.c
index 381750a155f..03d85cbf90b 100644
--- a/fs/reiserfs/lbalance.c
+++ b/fs/reiserfs/lbalance.c
@@ -390,7 +390,8 @@ static void leaf_item_bottle(struct buffer_info *dest_bi,
 
 	if (last_first == FIRST_TO_LAST) {
 		/* if ( if item in position item_num in buffer SOURCE is directory item ) */
-		if (is_direntry_le_ih(ih = B_N_PITEM_HEAD(src, item_num)))
+		ih = B_N_PITEM_HEAD(src, item_num);
+		if (is_direntry_le_ih(ih))
 			leaf_copy_dir_entries(dest_bi, src, FIRST_TO_LAST,
 					      item_num, 0, cpy_bytes);
 		else {
@@ -418,7 +419,8 @@ static void leaf_item_bottle(struct buffer_info *dest_bi,
 		}
 	} else {
 		/*  if ( if item in position item_num in buffer SOURCE is directory item ) */
-		if (is_direntry_le_ih(ih = B_N_PITEM_HEAD(src, item_num)))
+		ih = B_N_PITEM_HEAD(src, item_num);
+		if (is_direntry_le_ih(ih))
 			leaf_copy_dir_entries(dest_bi, src, LAST_TO_FIRST,
 					      item_num,
 					      I_ENTRY_COUNT(ih) - cpy_bytes,
@@ -774,8 +776,8 @@ void leaf_delete_items(struct buffer_info *cur_bi, int last_first,
 			leaf_delete_items_entirely(cur_bi, first + 1,
 						   del_num - 1);
 
-			if (is_direntry_le_ih
-			    (ih = B_N_PITEM_HEAD(bh, B_NR_ITEMS(bh) - 1)))
+			ih = B_N_PITEM_HEAD(bh, B_NR_ITEMS(bh) - 1);
+			if (is_direntry_le_ih(ih))
 				/* the last item is directory  */
 				/* len = numbers of directory entries in this item */
 				len = ih_entry_count(ih);
diff --git a/fs/seq_file.c b/fs/seq_file.c
index 7f40f30c55c..6c959275f2d 100644
--- a/fs/seq_file.c
+++ b/fs/seq_file.c
@@ -640,6 +640,26 @@ int seq_puts(struct seq_file *m, const char *s)
 }
 EXPORT_SYMBOL(seq_puts);
 
+/**
+ * seq_write - write arbitrary data to buffer
+ * @seq: seq_file identifying the buffer to which data should be written
+ * @data: data address
+ * @len: number of bytes
+ *
+ * Return 0 on success, non-zero otherwise.
+ */
+int seq_write(struct seq_file *seq, const void *data, size_t len)
+{
+	if (seq->count + len < seq->size) {
+		memcpy(seq->buf + seq->count, data, len);
+		seq->count += len;
+		return 0;
+	}
+	seq->count = seq->size;
+	return -1;
+}
+EXPORT_SYMBOL(seq_write);
+
 struct list_head *seq_list_start(struct list_head *head, loff_t pos)
 {
 	struct list_head *lh;
diff --git a/fs/ufs/inode.c b/fs/ufs/inode.c
index 3d2512c21f0..7cf33379fd4 100644
--- a/fs/ufs/inode.c
+++ b/fs/ufs/inode.c
@@ -56,9 +56,7 @@ static int ufs_block_to_path(struct inode *inode, sector_t i_block, sector_t off
 
 
 	UFSD("ptrs=uspi->s_apb = %d,double_blocks=%ld \n",ptrs,double_blocks);
-	if (i_block < 0) {
-		ufs_warning(inode->i_sb, "ufs_block_to_path", "block < 0");
-	} else if (i_block < direct_blocks) {
+	if (i_block < direct_blocks) {
 		offsets[n++] = i_block;
 	} else if ((i_block -= direct_blocks) < indirect_blocks) {
 		offsets[n++] = UFS_IND_BLOCK;
@@ -440,8 +438,6 @@ int ufs_getfrag_block(struct inode *inode, sector_t fragment, struct buffer_head
 	lock_kernel();
 
 	UFSD("ENTER, ino %lu, fragment %llu\n", inode->i_ino, (unsigned long long)fragment);
-	if (fragment < 0)
-		goto abort_negative;
 	if (fragment >
 	    ((UFS_NDADDR + uspi->s_apb + uspi->s_2apb + uspi->s_3apb)
 	     << uspi->s_fpbshift))
@@ -504,10 +500,6 @@ abort:
 	unlock_kernel();
 	return err;
 
-abort_negative:
-	ufs_warning(sb, "ufs_get_block", "block < 0");
-	goto abort;
-
 abort_too_big:
 	ufs_warning(sb, "ufs_get_block", "block > big");
 	goto abort;
diff --git a/fs/xfs/linux-2.6/xfs_linux.h b/fs/xfs/linux-2.6/xfs_linux.h
index f65a53f8752..6127e24062d 100644
--- a/fs/xfs/linux-2.6/xfs_linux.h
+++ b/fs/xfs/linux-2.6/xfs_linux.h
@@ -24,7 +24,7 @@
  * XFS_BIG_BLKNOS needs block layer disk addresses to be 64 bits.
  * XFS_BIG_INUMS requires XFS_BIG_BLKNOS to be set.
  */
-#if defined(CONFIG_LBD) || (BITS_PER_LONG == 64)
+#if defined(CONFIG_LBDAF) || (BITS_PER_LONG == 64)
 # define XFS_BIG_BLKNOS	1
 # define XFS_BIG_INUMS	1
 #else
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index 2e09efbca8d..a220d36f789 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -616,7 +616,7 @@ xfs_max_file_offset(
 	 */
 
 #if BITS_PER_LONG == 32
-# if defined(CONFIG_LBD)
+# if defined(CONFIG_LBDAF)
 	ASSERT(sizeof(sector_t) == 8);
 	pagefactor = PAGE_CACHE_SIZE;
 	bitshift = BITS_PER_LONG;
diff --git a/include/asm-generic/dma-mapping-common.h b/include/asm-generic/dma-mapping-common.h
new file mode 100644
index 00000000000..5406a601185
--- /dev/null
+++ b/include/asm-generic/dma-mapping-common.h
@@ -0,0 +1,190 @@
+#ifndef _ASM_GENERIC_DMA_MAPPING_H
+#define _ASM_GENERIC_DMA_MAPPING_H
+
+#include <linux/kmemcheck.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-debug.h>
+#include <linux/dma-attrs.h>
+
+static inline dma_addr_t dma_map_single_attrs(struct device *dev, void *ptr,
+					      size_t size,
+					      enum dma_data_direction dir,
+					      struct dma_attrs *attrs)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+	dma_addr_t addr;
+
+	kmemcheck_mark_initialized(ptr, size);
+	BUG_ON(!valid_dma_direction(dir));
+	addr = ops->map_page(dev, virt_to_page(ptr),
+			     (unsigned long)ptr & ~PAGE_MASK, size,
+			     dir, attrs);
+	debug_dma_map_page(dev, virt_to_page(ptr),
+			   (unsigned long)ptr & ~PAGE_MASK, size,
+			   dir, addr, true);
+	return addr;
+}
+
+static inline void dma_unmap_single_attrs(struct device *dev, dma_addr_t addr,
+					  size_t size,
+					  enum dma_data_direction dir,
+					  struct dma_attrs *attrs)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+
+	BUG_ON(!valid_dma_direction(dir));
+	if (ops->unmap_page)
+		ops->unmap_page(dev, addr, size, dir, attrs);
+	debug_dma_unmap_page(dev, addr, size, dir, true);
+}
+
+static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg,
+				   int nents, enum dma_data_direction dir,
+				   struct dma_attrs *attrs)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+	int i, ents;
+	struct scatterlist *s;
+
+	for_each_sg(sg, s, nents, i)
+		kmemcheck_mark_initialized(sg_virt(s), s->length);
+	BUG_ON(!valid_dma_direction(dir));
+	ents = ops->map_sg(dev, sg, nents, dir, attrs);
+	debug_dma_map_sg(dev, sg, nents, ents, dir);
+
+	return ents;
+}
+
+static inline void dma_unmap_sg_attrs(struct device *dev, struct scatterlist *sg,
+				      int nents, enum dma_data_direction dir,
+				      struct dma_attrs *attrs)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+
+	BUG_ON(!valid_dma_direction(dir));
+	debug_dma_unmap_sg(dev, sg, nents, dir);
+	if (ops->unmap_sg)
+		ops->unmap_sg(dev, sg, nents, dir, attrs);
+}
+
+static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
+				      size_t offset, size_t size,
+				      enum dma_data_direction dir)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+	dma_addr_t addr;
+
+	kmemcheck_mark_initialized(page_address(page) + offset, size);
+	BUG_ON(!valid_dma_direction(dir));
+	addr = ops->map_page(dev, page, offset, size, dir, NULL);
+	debug_dma_map_page(dev, page, offset, size, dir, addr, false);
+
+	return addr;
+}
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t addr,
+				  size_t size, enum dma_data_direction dir)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+
+	BUG_ON(!valid_dma_direction(dir));
+	if (ops->unmap_page)
+		ops->unmap_page(dev, addr, size, dir, NULL);
+	debug_dma_unmap_page(dev, addr, size, dir, false);
+}
+
+static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t addr,
+					   size_t size,
+					   enum dma_data_direction dir)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+
+	BUG_ON(!valid_dma_direction(dir));
+	if (ops->sync_single_for_cpu)
+		ops->sync_single_for_cpu(dev, addr, size, dir);
+	debug_dma_sync_single_for_cpu(dev, addr, size, dir);
+	flush_write_buffers();
+}
+
+static inline void dma_sync_single_for_device(struct device *dev,
+					      dma_addr_t addr, size_t size,
+					      enum dma_data_direction dir)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+
+	BUG_ON(!valid_dma_direction(dir));
+	if (ops->sync_single_for_device)
+		ops->sync_single_for_device(dev, addr, size, dir);
+	debug_dma_sync_single_for_device(dev, addr, size, dir);
+	flush_write_buffers();
+}
+
+static inline void dma_sync_single_range_for_cpu(struct device *dev,
+						 dma_addr_t addr,
+						 unsigned long offset,
+						 size_t size,
+						 enum dma_data_direction dir)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+
+	BUG_ON(!valid_dma_direction(dir));
+	if (ops->sync_single_range_for_cpu) {
+		ops->sync_single_range_for_cpu(dev, addr, offset, size, dir);
+		debug_dma_sync_single_range_for_cpu(dev, addr, offset, size, dir);
+
+		flush_write_buffers();
+	} else
+		dma_sync_single_for_cpu(dev, addr, size, dir);
+}
+
+static inline void dma_sync_single_range_for_device(struct device *dev,
+						    dma_addr_t addr,
+						    unsigned long offset,
+						    size_t size,
+						    enum dma_data_direction dir)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+
+	BUG_ON(!valid_dma_direction(dir));
+	if (ops->sync_single_range_for_device) {
+		ops->sync_single_range_for_device(dev, addr, offset, size, dir);
+		debug_dma_sync_single_range_for_device(dev, addr, offset, size, dir);
+
+		flush_write_buffers();
+	} else
+		dma_sync_single_for_device(dev, addr, size, dir);
+}
+
+static inline void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+		    int nelems, enum dma_data_direction dir)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+
+	BUG_ON(!valid_dma_direction(dir));
+	if (ops->sync_sg_for_cpu)
+		ops->sync_sg_for_cpu(dev, sg, nelems, dir);
+	debug_dma_sync_sg_for_cpu(dev, sg, nelems, dir);
+	flush_write_buffers();
+}
+
+static inline void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+		       int nelems, enum dma_data_direction dir)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+
+	BUG_ON(!valid_dma_direction(dir));
+	if (ops->sync_sg_for_device)
+		ops->sync_sg_for_device(dev, sg, nelems, dir);
+	debug_dma_sync_sg_for_device(dev, sg, nelems, dir);
+
+	flush_write_buffers();
+}
+
+#define dma_map_single(d, a, s, r) dma_map_single_attrs(d, a, s, r, NULL)
+#define dma_unmap_single(d, a, s, r) dma_unmap_single_attrs(d, a, s, r, NULL)
+#define dma_map_sg(d, s, n, r) dma_map_sg_attrs(d, s, n, r, NULL)
+#define dma_unmap_sg(d, s, n, r) dma_unmap_sg_attrs(d, s, n, r, NULL)
+
+#endif
diff --git a/include/asm-generic/hardirq.h b/include/asm-generic/hardirq.h
index 3d5d2c906ab..23bb4dad496 100644
--- a/include/asm-generic/hardirq.h
+++ b/include/asm-generic/hardirq.h
@@ -11,19 +11,6 @@ typedef struct {
 
 #include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
 
-#ifndef HARDIRQ_BITS
-#define HARDIRQ_BITS	8
-#endif
-
-/*
- * The hardirq mask has to be large enough to have
- * space for potentially all IRQ sources in the system
- * nesting on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
 #ifndef ack_bad_irq
 static inline void ack_bad_irq(unsigned int irq)
 {
diff --git a/include/asm-generic/kmap_types.h b/include/asm-generic/kmap_types.h
index 54e8b3d956b..eddbce0f9fb 100644
--- a/include/asm-generic/kmap_types.h
+++ b/include/asm-generic/kmap_types.h
@@ -24,7 +24,10 @@ D(12)	KM_SOFTIRQ1,
 D(13)	KM_SYNC_ICACHE,
 D(14)	KM_SYNC_DCACHE,
 D(15)	KM_UML_USERCOPY, /* UML specific, for copy_*_user - used in do_op_one_page */
-D(16)	KM_TYPE_NR
+D(16)	KM_IRQ_PTE,
+D(17)	KM_NMI,
+D(18)	KM_NMI_PTE,
+D(19)	KM_TYPE_NR
 };
 
 #undef D
diff --git a/include/asm-generic/pci.h b/include/asm-generic/pci.h
index 515c6e2e321..b4326b5466e 100644
--- a/include/asm-generic/pci.h
+++ b/include/asm-generic/pci.h
@@ -30,19 +30,6 @@ pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
 	res->end = region->end;
 }
 
-static inline struct resource *
-pcibios_select_root(struct pci_dev *pdev, struct resource *res)
-{
-	struct resource *root = NULL;
-
-	if (res->flags & IORESOURCE_IO)
-		root = &ioport_resource;
-	if (res->flags & IORESOURCE_MEM)
-		root = &iomem_resource;
-
-	return root;
-}
-
 #define pcibios_scan_all_fns(a, b)	0
 
 #ifndef HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ
diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
index e410f602cab..e2bd73e8f9c 100644
--- a/include/asm-generic/pgtable.h
+++ b/include/asm-generic/pgtable.h
@@ -129,6 +129,10 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addres
 #define move_pte(pte, prot, old_addr, new_addr)	(pte)
 #endif
 
+#ifndef pgprot_noncached
+#define pgprot_noncached(prot)	(prot)
+#endif
+
 #ifndef pgprot_writecombine
 #define pgprot_writecombine pgprot_noncached
 #endif
diff --git a/include/asm-generic/sections.h b/include/asm-generic/sections.h
index 4ce48e87853..d083561337f 100644
--- a/include/asm-generic/sections.h
+++ b/include/asm-generic/sections.h
@@ -14,6 +14,9 @@ extern char __kprobes_text_start[], __kprobes_text_end[];
 extern char __initdata_begin[], __initdata_end[];
 extern char __start_rodata[], __end_rodata[];
 
+/* Start and end of .ctors section - used for constructor calls. */
+extern char __ctors_start[], __ctors_end[];
+
 /* function descriptor handling (if any).  Override
  * in asm/sections.h */
 #ifndef dereference_function_descriptor
diff --git a/include/asm-generic/uaccess.h b/include/asm-generic/uaccess.h
index 6d8cab22e29..b218b8513d0 100644
--- a/include/asm-generic/uaccess.h
+++ b/include/asm-generic/uaccess.h
@@ -163,7 +163,7 @@ static inline __must_check long __copy_to_user(void __user *to,
 #define put_user(x, ptr)					\
 ({								\
 	might_sleep();						\
-	__access_ok(ptr, sizeof (*ptr)) ?			\
+	access_ok(VERIFY_WRITE, ptr, sizeof(*ptr)) ?		\
 		__put_user(x, ptr) :				\
 		-EFAULT;					\
 })
@@ -219,7 +219,7 @@ extern int __put_user_bad(void) __attribute__((noreturn));
 #define get_user(x, ptr)					\
 ({								\
 	might_sleep();						\
-	__access_ok(ptr, sizeof (*ptr)) ?			\
+	access_ok(VERIFY_READ, ptr, sizeof(*ptr)) ?		\
 		__get_user(x, ptr) :				\
 		-EFAULT;					\
 })
@@ -244,7 +244,7 @@ static inline long copy_from_user(void *to,
 		const void __user * from, unsigned long n)
 {
 	might_sleep();
-	if (__access_ok(from, n))
+	if (access_ok(VERIFY_READ, from, n))
 		return __copy_from_user(to, from, n);
 	else
 		return n;
@@ -254,7 +254,7 @@ static inline long copy_to_user(void __user *to,
 		const void *from, unsigned long n)
 {
 	might_sleep();
-	if (__access_ok(to, n))
+	if (access_ok(VERIFY_WRITE, to, n))
 		return __copy_to_user(to, from, n);
 	else
 		return n;
@@ -278,7 +278,7 @@ __strncpy_from_user(char *dst, const char __user *src, long count)
 static inline long
 strncpy_from_user(char *dst, const char __user *src, long count)
 {
-	if (!__access_ok(src, 1))
+	if (!access_ok(VERIFY_READ, src, 1))
 		return -EFAULT;
 	return __strncpy_from_user(dst, src, count);
 }
@@ -291,6 +291,8 @@ strncpy_from_user(char *dst, const char __user *src, long count)
 #ifndef strnlen_user
 static inline long strnlen_user(const char __user *src, long n)
 {
+	if (!access_ok(VERIFY_READ, src, 1))
+		return 0;
 	return strlen((void * __force)src) + 1;
 }
 #endif
@@ -316,7 +318,7 @@ static inline __must_check unsigned long
 clear_user(void __user *to, unsigned long n)
 {
 	might_sleep();
-	if (!__access_ok(to, n))
+	if (!access_ok(VERIFY_WRITE, to, n))
 		return n;
 
 	return __clear_user(to, n);
diff --git a/include/asm-generic/unistd.h b/include/asm-generic/unistd.h
index 5b34b6233d6..1125e5a1ee5 100644
--- a/include/asm-generic/unistd.h
+++ b/include/asm-generic/unistd.h
@@ -618,8 +618,13 @@ __SYSCALL(__NR_migrate_pages, sys_migrate_pages)
 __SYSCALL(__NR_move_pages, sys_move_pages)
 #endif
 
+#define __NR_rt_tgsigqueueinfo 240
+__SYSCALL(__NR_rt_tgsigqueueinfo, sys_rt_tgsigqueueinfo)
+#define __NR_perf_counter_open 241
+__SYSCALL(__NR_perf_counter_open, sys_perf_counter_open)
+
 #undef __NR_syscalls
-#define __NR_syscalls 240
+#define __NR_syscalls 242
 
 /*
  * All syscalls below here should go away really,
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 6bdba10fef4..92b73b6140f 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -440,12 +440,21 @@
 		INIT_TASK						\
 	}
 
+#ifdef CONFIG_CONSTRUCTORS
+#define KERNEL_CTORS()	VMLINUX_SYMBOL(__ctors_start) = .; \
+			*(.ctors)			   \
+			VMLINUX_SYMBOL(__ctors_end) = .;
+#else
+#define KERNEL_CTORS()
+#endif
+
 /* init and exit section handling */
 #define INIT_DATA							\
 	*(.init.data)							\
 	DEV_DISCARD(init.data)						\
 	CPU_DISCARD(init.data)						\
 	MEM_DISCARD(init.data)						\
+	KERNEL_CTORS()							\
 	*(.init.rodata)							\
 	DEV_DISCARD(init.rodata)					\
 	CPU_DISCARD(init.rodata)					\
@@ -616,7 +625,7 @@
 	*(.init.ramfs)							\
 	VMLINUX_SYMBOL(__initramfs_end) = .;
 #else
-#define INITRAMFS
+#define INIT_RAM_FS
 #endif
 
 /**
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index d4ddc22e46b..45b67d9c39c 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -34,9 +34,6 @@
 #ifndef _DRM_P_H_
 #define _DRM_P_H_
 
-/* If you want the memory alloc debug functionality, change define below */
-/* #define DEBUG_MEMORY */
-
 #ifdef __KERNEL__
 #ifdef __alpha__
 /* add include of current.h so that "current" is defined
@@ -133,31 +130,6 @@ extern void drm_ut_debug_printk(unsigned int request_level,
 
 #define DRM_FLAG_DEBUG	  0x01
 
-#define DRM_MEM_DMA	   0
-#define DRM_MEM_SAREA	   1
-#define DRM_MEM_DRIVER	   2
-#define DRM_MEM_MAGIC	   3
-#define DRM_MEM_IOCTLS	   4
-#define DRM_MEM_MAPS	   5
-#define DRM_MEM_VMAS	   6
-#define DRM_MEM_BUFS	   7
-#define DRM_MEM_SEGS	   8
-#define DRM_MEM_PAGES	   9
-#define DRM_MEM_FILES	  10
-#define DRM_MEM_QUEUES	  11
-#define DRM_MEM_CMDS	  12
-#define DRM_MEM_MAPPINGS  13
-#define DRM_MEM_BUFLISTS  14
-#define DRM_MEM_AGPLISTS  15
-#define DRM_MEM_TOTALAGP  16
-#define DRM_MEM_BOUNDAGP  17
-#define DRM_MEM_CTXBITMAP 18
-#define DRM_MEM_STUB      19
-#define DRM_MEM_SGLISTS   20
-#define DRM_MEM_CTXLIST   21
-#define DRM_MEM_MM        22
-#define DRM_MEM_HASHTAB   23
-
 #define DRM_MAX_CTXBITMAP (PAGE_SIZE * 8)
 #define DRM_MAP_HASH_OFFSET 0x10000000
 
@@ -1517,24 +1489,6 @@ static __inline__ void drm_core_dropmap(struct drm_local_map *map)
 {
 }
 
-#ifndef DEBUG_MEMORY
-/** Wrapper around kmalloc() */
-static __inline__ void *drm_alloc(size_t size, int area)
-{
-	return kmalloc(size, GFP_KERNEL);
-}
-
-/** Wrapper around kfree() */
-static __inline__ void drm_free(void *pt, size_t size, int area)
-{
-	kfree(pt);
-}
-
-/** Wrapper around kcalloc() */
-static __inline__ void *drm_calloc(size_t nmemb, size_t size, int area)
-{
-	return kcalloc(nmemb, size, GFP_KERNEL);
-}
 
 static __inline__ void *drm_calloc_large(size_t nmemb, size_t size)
 {
@@ -1555,12 +1509,6 @@ static __inline void drm_free_large(void *ptr)
 
 	vfree(ptr);
 }
-#else
-extern void *drm_alloc(size_t size, int area);
-extern void drm_free(void *pt, size_t size, int area);
-extern void *drm_calloc(size_t nmemb, size_t size, int area);
-#endif
-
 /*@}*/
 
 #endif				/* __KERNEL__ */
diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
index a11cc9d3259..c263e4d7175 100644
--- a/include/drm/drm_edid.h
+++ b/include/drm/drm_edid.h
@@ -28,53 +28,49 @@
 #define EDID_LENGTH 128
 #define DDC_ADDR 0x50
 
-#ifdef BIG_ENDIAN
-#error "EDID structure is little endian, need big endian versions"
-#else
-
 struct est_timings {
 	u8 t1;
 	u8 t2;
 	u8 mfg_rsvd;
 } __attribute__((packed));
 
+/* 00=16:10, 01=4:3, 10=5:4, 11=16:9 */
+#define EDID_TIMING_ASPECT_SHIFT 0
+#define EDID_TIMING_ASPECT_MASK  (0x3 << EDID_TIMING_ASPECT_SHIFT)
+
+/* need to add 60 */
+#define EDID_TIMING_VFREQ_SHIFT  2
+#define EDID_TIMING_VFREQ_MASK   (0x3f << EDID_TIMING_VFREQ_SHIFT)
+
 struct std_timing {
 	u8 hsize; /* need to multiply by 8 then add 248 */
-	u8 vfreq:6; /* need to add 60 */
-	u8 aspect_ratio:2; /* 00=16:10, 01=4:3, 10=5:4, 11=16:9 */
+	u8 vfreq_aspect;
 } __attribute__((packed));
 
+#define DRM_EDID_PT_HSYNC_POSITIVE (1 << 6)
+#define DRM_EDID_PT_VSYNC_POSITIVE (1 << 5)
+#define DRM_EDID_PT_SEPARATE_SYNC  (3 << 3)
+#define DRM_EDID_PT_STEREO         (1 << 2)
+#define DRM_EDID_PT_INTERLACED     (1 << 1)
+
 /* If detailed data is pixel timing */
 struct detailed_pixel_timing {
 	u8 hactive_lo;
 	u8 hblank_lo;
-	u8 hblank_hi:4;
-	u8 hactive_hi:4;
+	u8 hactive_hblank_hi;
 	u8 vactive_lo;
 	u8 vblank_lo;
-	u8 vblank_hi:4;
-	u8 vactive_hi:4;
+	u8 vactive_vblank_hi;
 	u8 hsync_offset_lo;
 	u8 hsync_pulse_width_lo;
-	u8 vsync_pulse_width_lo:4;
-	u8 vsync_offset_lo:4;
-	u8 vsync_pulse_width_hi:2;
-	u8 vsync_offset_hi:2;
-	u8 hsync_pulse_width_hi:2;
-	u8 hsync_offset_hi:2;
+	u8 vsync_offset_pulse_width_lo;
+	u8 hsync_vsync_offset_pulse_width_hi;
 	u8 width_mm_lo;
 	u8 height_mm_lo;
-	u8 height_mm_hi:4;
-	u8 width_mm_hi:4;
+	u8 width_height_mm_hi;
 	u8 hborder;
 	u8 vborder;
-	u8 unknown0:1;
-	u8 hsync_positive:1;
-	u8 vsync_positive:1;
-	u8 separate_sync:2;
-	u8 stereo:1;
-	u8 unknown6:1;
-	u8 interlaced:1;
+	u8 misc;
 } __attribute__((packed));
 
 /* If it's not pixel timing, it'll be one of the below */
@@ -88,18 +84,16 @@ struct detailed_data_monitor_range {
 	u8 min_hfreq_khz;
 	u8 max_hfreq_khz;
 	u8 pixel_clock_mhz; /* need to multiply by 10 */
-	u16 sec_gtf_toggle; /* A000=use above, 20=use below */ /* FIXME: byte order */
+	__le16 sec_gtf_toggle; /* A000=use above, 20=use below */
 	u8 hfreq_start_khz; /* need to multiply by 2 */
 	u8 c; /* need to divide by 2 */
-	u16 m; /* FIXME: byte order */
+	__le16 m;
 	u8 k;
 	u8 j; /* need to divide by 2 */
 } __attribute__((packed));
 
 struct detailed_data_wpindex {
-	u8 white_y_lo:2;
-	u8 white_x_lo:2;
-	u8 pad:4;
+	u8 white_xy_lo; /* Upper 2 bits each */
 	u8 white_x_hi;
 	u8 white_y_hi;
 	u8 gamma; /* need to divide by 100 then add 1 */
@@ -134,13 +128,29 @@ struct detailed_non_pixel {
 #define EDID_DETAIL_MONITOR_SERIAL 0xff
 
 struct detailed_timing {
-	u16 pixel_clock; /* need to multiply by 10 KHz */ /* FIXME: byte order */
+	__le16 pixel_clock; /* need to multiply by 10 KHz */
 	union {
 		struct detailed_pixel_timing pixel_data;
 		struct detailed_non_pixel other_data;
 	} data;
 } __attribute__((packed));
 
+#define DRM_EDID_INPUT_SERRATION_VSYNC (1 << 7)
+#define DRM_EDID_INPUT_SYNC_ON_GREEN   (1 << 5)
+#define DRM_EDID_INPUT_COMPOSITE_SYNC  (1 << 4)
+#define DRM_EDID_INPUT_SEPARATE_SYNCS  (1 << 3)
+#define DRM_EDID_INPUT_BLANK_TO_BLACK  (1 << 2)
+#define DRM_EDID_INPUT_VIDEO_LEVEL     (3 << 1)
+#define DRM_EDID_INPUT_DIGITAL         (1 << 0) /* bits above must be zero if set */
+
+#define DRM_EDID_FEATURE_DEFAULT_GTF      (1 << 7)
+#define DRM_EDID_FEATURE_PREFERRED_TIMING (1 << 6)
+#define DRM_EDID_FEATURE_STANDARD_COLOR   (1 << 5)
+#define DRM_EDID_FEATURE_DISPLAY_TYPE     (3 << 3) /* 00=mono, 01=rgb, 10=non-rgb, 11=unknown */
+#define DRM_EDID_FEATURE_PM_ACTIVE_OFF    (1 << 2)
+#define DRM_EDID_FEATURE_PM_SUSPEND       (1 << 1)
+#define DRM_EDID_FEATURE_PM_STANDBY       (1 << 0)
+
 struct edid {
 	u8 header[8];
 	/* Vendor & product info */
@@ -153,25 +163,11 @@ struct edid {
 	u8 version;
 	u8 revision;
 	/* Display info: */
-	/*   input definition */
-	u8 serration_vsync:1;
-	u8 sync_on_green:1;
-	u8 composite_sync:1;
-	u8 separate_syncs:1;
-	u8 blank_to_black:1;
-	u8 video_level:2;
-	u8 digital:1; /* bits below must be zero if set */
+	u8 input;
 	u8 width_cm;
 	u8 height_cm;
 	u8 gamma;
-	/*   feature support */
-	u8 default_gtf:1;
-	u8 preferred_timing:1;
-	u8 standard_color:1;
-	u8 display_type:2; /* 00=mono, 01=rgb, 10=non-rgb, 11=unknown */
-	u8 pm_active_off:1;
-	u8 pm_suspend:1;
-	u8 pm_standby:1;
+	u8 features;
 	/* Color characteristics */
 	u8 red_green_lo;
 	u8 black_white_lo;
@@ -195,8 +191,6 @@ struct edid {
 	u8 checksum;
 } __attribute__((packed));
 
-#endif /* little endian structs */
-
 #define EDID_PRODUCT_ID(e) ((e)->prod_code[0] | ((e)->prod_code[1] << 8))
 
 #endif /* __DRM_EDID_H__ */
diff --git a/include/drm/drm_memory_debug.h b/include/drm/drm_memory_debug.h
deleted file mode 100644
index 6463271deea..00000000000
--- a/include/drm/drm_memory_debug.h
+++ /dev/null
@@ -1,309 +0,0 @@
-/**
- * \file drm_memory_debug.h
- * Memory management wrappers for DRM.
- *
- * \author Rickard E. (Rik) Faith <faith@valinux.com>
- * \author Gareth Hughes <gareth@valinux.com>
- */
-
-/*
- * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas.
- * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
- * All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "drmP.h"
-
-typedef struct drm_mem_stats {
-	const char *name;
-	int succeed_count;
-	int free_count;
-	int fail_count;
-	unsigned long bytes_allocated;
-	unsigned long bytes_freed;
-} drm_mem_stats_t;
-
-static DEFINE_SPINLOCK(drm_mem_lock);
-static unsigned long drm_ram_available = 0;	/* In pages */
-static unsigned long drm_ram_used = 0;
-static drm_mem_stats_t drm_mem_stats[] =
-{
-	[DRM_MEM_DMA] = {"dmabufs"},
-	[DRM_MEM_SAREA] = {"sareas"},
-	[DRM_MEM_DRIVER] = {"driver"},
-	[DRM_MEM_MAGIC] = {"magic"},
-	[DRM_MEM_IOCTLS] = {"ioctltab"},
-	[DRM_MEM_MAPS] = {"maplist"},
-	[DRM_MEM_VMAS] = {"vmalist"},
-	[DRM_MEM_BUFS] = {"buflist"},
-	[DRM_MEM_SEGS] = {"seglist"},
-	[DRM_MEM_PAGES] = {"pagelist"},
-	[DRM_MEM_FILES] = {"files"},
-	[DRM_MEM_QUEUES] = {"queues"},
-	[DRM_MEM_CMDS] = {"commands"},
-	[DRM_MEM_MAPPINGS] = {"mappings"},
-	[DRM_MEM_BUFLISTS] = {"buflists"},
-	[DRM_MEM_AGPLISTS] = {"agplist"},
-	[DRM_MEM_SGLISTS] = {"sglist"},
-	[DRM_MEM_TOTALAGP] = {"totalagp"},
-	[DRM_MEM_BOUNDAGP] = {"boundagp"},
-	[DRM_MEM_CTXBITMAP] = {"ctxbitmap"},
-	[DRM_MEM_CTXLIST] = {"ctxlist"},
-	[DRM_MEM_STUB] = {"stub"},
-	{NULL, 0,}		/* Last entry must be null */
-};
-
-void drm_mem_init (void) {
-	drm_mem_stats_t *mem;
-	struct sysinfo si;
-
-	for (mem = drm_mem_stats; mem->name; ++mem) {
-		mem->succeed_count = 0;
-		mem->free_count = 0;
-		mem->fail_count = 0;
-		mem->bytes_allocated = 0;
-		mem->bytes_freed = 0;
-	}
-
-	si_meminfo(&si);
-	drm_ram_available = si.totalram;
-	drm_ram_used = 0;
-}
-
-/* drm_mem_info is called whenever a process reads /dev/drm/mem. */
-
-static int drm__mem_info (char *buf, char **start, off_t offset,
-			   int request, int *eof, void *data) {
-	drm_mem_stats_t *pt;
-	int len = 0;
-
-	if (offset > DRM_PROC_LIMIT) {
-		*eof = 1;
-		return 0;
-	}
-
-	*eof = 0;
-	*start = &buf[offset];
-
-	DRM_PROC_PRINT("		  total counts			"
-		       " |    outstanding  \n");
-	DRM_PROC_PRINT("type	   alloc freed fail	bytes	   freed"
-		       " | allocs      bytes\n\n");
-	DRM_PROC_PRINT("%-9.9s %5d %5d %4d %10lu kB         |\n",
-		       "system", 0, 0, 0,
-		       drm_ram_available << (PAGE_SHIFT - 10));
-	DRM_PROC_PRINT("%-9.9s %5d %5d %4d %10lu kB         |\n",
-		       "locked", 0, 0, 0, drm_ram_used >> 10);
-	DRM_PROC_PRINT("\n");
-	for (pt = drm_mem_stats; pt->name; pt++) {
-		DRM_PROC_PRINT("%-9.9s %5d %5d %4d %10lu %10lu | %6d %10ld\n",
-			       pt->name,
-			       pt->succeed_count,
-			       pt->free_count,
-			       pt->fail_count,
-			       pt->bytes_allocated,
-			       pt->bytes_freed,
-			       pt->succeed_count - pt->free_count,
-			       (long)pt->bytes_allocated
-			       - (long)pt->bytes_freed);
-	}
-
-	if (len > request + offset)
-		return request;
-	*eof = 1;
-	return len - offset;
-}
-
-int drm_mem_info (char *buf, char **start, off_t offset,
-		   int len, int *eof, void *data) {
-	int ret;
-
-	spin_lock(&drm_mem_lock);
-	ret = drm__mem_info (buf, start, offset, len, eof, data);
-	spin_unlock(&drm_mem_lock);
-	return ret;
-}
-
-void *drm_alloc (size_t size, int area) {
-	void *pt;
-
-	if (!size) {
-		DRM_MEM_ERROR(area, "Allocating 0 bytes\n");
-		return NULL;
-	}
-
-	if (!(pt = kmalloc(size, GFP_KERNEL))) {
-		spin_lock(&drm_mem_lock);
-		++drm_mem_stats[area].fail_count;
-		spin_unlock(&drm_mem_lock);
-		return NULL;
-	}
-	spin_lock(&drm_mem_lock);
-	++drm_mem_stats[area].succeed_count;
-	drm_mem_stats[area].bytes_allocated += size;
-	spin_unlock(&drm_mem_lock);
-	return pt;
-}
-
-void *drm_calloc (size_t nmemb, size_t size, int area) {
-	void *addr;
-
-	addr = drm_alloc (nmemb * size, area);
-	if (addr != NULL)
-		memset((void *)addr, 0, size * nmemb);
-
-	return addr;
-}
-
-void *drm_realloc (void *oldpt, size_t oldsize, size_t size, int area) {
-	void *pt;
-
-	if (!(pt = drm_alloc (size, area)))
-		return NULL;
-	if (oldpt && oldsize) {
-		memcpy(pt, oldpt, oldsize);
-		drm_free (oldpt, oldsize, area);
-	}
-	return pt;
-}
-
-void drm_free (void *pt, size_t size, int area) {
-	int alloc_count;
-	int free_count;
-
-	if (!pt)
-		DRM_MEM_ERROR(area, "Attempt to free NULL pointer\n");
-	else
-		kfree(pt);
-	spin_lock(&drm_mem_lock);
-	drm_mem_stats[area].bytes_freed += size;
-	free_count = ++drm_mem_stats[area].free_count;
-	alloc_count = drm_mem_stats[area].succeed_count;
-	spin_unlock(&drm_mem_lock);
-	if (free_count > alloc_count) {
-		DRM_MEM_ERROR(area, "Excess frees: %d frees, %d allocs\n",
-			      free_count, alloc_count);
-	}
-}
-
-#if __OS_HAS_AGP
-
-DRM_AGP_MEM *drm_alloc_agp (drm_device_t *dev, int pages, u32 type) {
-	DRM_AGP_MEM *handle;
-
-	if (!pages) {
-		DRM_MEM_ERROR(DRM_MEM_TOTALAGP, "Allocating 0 pages\n");
-		return NULL;
-	}
-
-	if ((handle = drm_agp_allocate_memory (pages, type))) {
-		spin_lock(&drm_mem_lock);
-		++drm_mem_stats[DRM_MEM_TOTALAGP].succeed_count;
-		drm_mem_stats[DRM_MEM_TOTALAGP].bytes_allocated
-		    += pages << PAGE_SHIFT;
-		spin_unlock(&drm_mem_lock);
-		return handle;
-	}
-	spin_lock(&drm_mem_lock);
-	++drm_mem_stats[DRM_MEM_TOTALAGP].fail_count;
-	spin_unlock(&drm_mem_lock);
-	return NULL;
-}
-
-int drm_free_agp (DRM_AGP_MEM * handle, int pages) {
-	int alloc_count;
-	int free_count;
-	int retval = -EINVAL;
-
-	if (!handle) {
-		DRM_MEM_ERROR(DRM_MEM_TOTALAGP,
-			      "Attempt to free NULL AGP handle\n");
-		return retval;
-	}
-
-	if (drm_agp_free_memory (handle)) {
-		spin_lock(&drm_mem_lock);
-		free_count = ++drm_mem_stats[DRM_MEM_TOTALAGP].free_count;
-		alloc_count = drm_mem_stats[DRM_MEM_TOTALAGP].succeed_count;
-		drm_mem_stats[DRM_MEM_TOTALAGP].bytes_freed
-		    += pages << PAGE_SHIFT;
-		spin_unlock(&drm_mem_lock);
-		if (free_count > alloc_count) {
-			DRM_MEM_ERROR(DRM_MEM_TOTALAGP,
-				      "Excess frees: %d frees, %d allocs\n",
-				      free_count, alloc_count);
-		}
-		return 0;
-	}
-	return retval;
-}
-
-int drm_bind_agp (DRM_AGP_MEM * handle, unsigned int start) {
-	int retcode = -EINVAL;
-
-	if (!handle) {
-		DRM_MEM_ERROR(DRM_MEM_BOUNDAGP,
-			      "Attempt to bind NULL AGP handle\n");
-		return retcode;
-	}
-
-	if (!(retcode = drm_agp_bind_memory (handle, start))) {
-		spin_lock(&drm_mem_lock);
-		++drm_mem_stats[DRM_MEM_BOUNDAGP].succeed_count;
-		drm_mem_stats[DRM_MEM_BOUNDAGP].bytes_allocated
-		    += handle->page_count << PAGE_SHIFT;
-		spin_unlock(&drm_mem_lock);
-		return retcode;
-	}
-	spin_lock(&drm_mem_lock);
-	++drm_mem_stats[DRM_MEM_BOUNDAGP].fail_count;
-	spin_unlock(&drm_mem_lock);
-	return retcode;
-}
-
-int drm_unbind_agp (DRM_AGP_MEM * handle) {
-	int alloc_count;
-	int free_count;
-	int retcode = -EINVAL;
-
-	if (!handle) {
-		DRM_MEM_ERROR(DRM_MEM_BOUNDAGP,
-			      "Attempt to unbind NULL AGP handle\n");
-		return retcode;
-	}
-
-	if ((retcode = drm_agp_unbind_memory (handle)))
-		return retcode;
-	spin_lock(&drm_mem_lock);
-	free_count = ++drm_mem_stats[DRM_MEM_BOUNDAGP].free_count;
-	alloc_count = drm_mem_stats[DRM_MEM_BOUNDAGP].succeed_count;
-	drm_mem_stats[DRM_MEM_BOUNDAGP].bytes_freed
-	    += handle->page_count << PAGE_SHIFT;
-	spin_unlock(&drm_mem_lock);
-	if (free_count > alloc_count) {
-		DRM_MEM_ERROR(DRM_MEM_BOUNDAGP,
-			      "Excess frees: %d frees, %d allocs\n",
-			      free_count, alloc_count);
-	}
-	return retcode;
-}
-#endif
diff --git a/include/drm/drm_mm.h b/include/drm/drm_mm.h
index 5662f4278ef..f8332073d27 100644
--- a/include/drm/drm_mm.h
+++ b/include/drm/drm_mm.h
@@ -59,13 +59,22 @@ struct drm_mm {
 /*
  * Basic range manager support (drm_mm.c)
  */
-
-extern struct drm_mm_node *drm_mm_get_block(struct drm_mm_node *parent,
-					    unsigned long size,
-					    unsigned alignment);
-extern struct drm_mm_node *drm_mm_get_block_atomic(struct drm_mm_node *parent,
+extern struct drm_mm_node *drm_mm_get_block_generic(struct drm_mm_node *node,
+						    unsigned long size,
+						    unsigned alignment,
+						    int atomic);
+static inline struct drm_mm_node *drm_mm_get_block(struct drm_mm_node *parent,
 						   unsigned long size,
-						   unsigned alignment);
+						   unsigned alignment)
+{
+	return drm_mm_get_block_generic(parent, size, alignment, 0);
+}
+static inline struct drm_mm_node *drm_mm_get_block_atomic(struct drm_mm_node *parent,
+							  unsigned long size,
+							  unsigned alignment)
+{
+	return drm_mm_get_block_generic(parent, size, alignment, 1);
+}
 extern void drm_mm_put_block(struct drm_mm_node *cur);
 extern struct drm_mm_node *drm_mm_search_free(const struct drm_mm *mm,
 					      unsigned long size,
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index a2df7030d49..03f22076381 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -308,6 +308,7 @@ unifdef-y += pmu.h
 unifdef-y += poll.h
 unifdef-y += ppp_defs.h
 unifdef-y += ppp-comp.h
+unifdef-y += pps.h
 unifdef-y += ptrace.h
 unifdef-y += quota.h
 unifdef-y += random.h
diff --git a/include/linux/agp_backend.h b/include/linux/agp_backend.h
index 2b8df8b420f..76fa794fdac 100644
--- a/include/linux/agp_backend.h
+++ b/include/linux/agp_backend.h
@@ -70,7 +70,7 @@ struct agp_memory {
 	struct agp_memory *next;
 	struct agp_memory *prev;
 	struct agp_bridge_data *bridge;
-	unsigned long *memory;
+	struct page **pages;
 	size_t page_count;
 	int key;
 	int num_scratch_pages;
diff --git a/include/linux/amba/pl061.h b/include/linux/amba/pl061.h
new file mode 100644
index 00000000000..b4fbd986260
--- /dev/null
+++ b/include/linux/amba/pl061.h
@@ -0,0 +1,15 @@
+/* platform data for the PL061 GPIO driver */
+
+struct pl061_platform_data {
+	/* number of the first GPIO */
+	unsigned	gpio_base;
+
+	/* number of the first IRQ.
+	 * If the IRQ functionality in not desired this must be set to
+	 * (unsigned) -1.
+	 */
+	unsigned	irq_base;
+
+	u8		directions;	/* startup directions, 1: out, 0: in */
+	u8		values;		/* startup values */
+};
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 915da43edee..9c75921f0c1 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -800,6 +800,20 @@ static inline int ata_id_is_ssd(const u16 *id)
 	return id[ATA_ID_ROT_SPEED] == 0x01;
 }
 
+static inline int ata_id_pio_need_iordy(const u16 *id, const u8 pio)
+{
+	/* CF spec. r4.1 Table 22 says no IORDY on PIO5 and PIO6. */
+	if (pio > 4 && ata_id_is_cfa(id))
+		return 0;
+	/* For PIO3 and higher it is mandatory. */
+	if (pio > 2)
+		return 1;
+	/* Turn it on when possible. */
+	if (ata_id_has_iordy(id))
+		return 1;
+	return 0;
+}
+
 static inline int ata_drive_40wire(const u16 *dev_id)
 {
 	if (ata_id_is_sata(dev_id))
diff --git a/include/linux/compiler-gcc3.h b/include/linux/compiler-gcc3.h
index 8005effc04f..b721129e046 100644
--- a/include/linux/compiler-gcc3.h
+++ b/include/linux/compiler-gcc3.h
@@ -16,6 +16,12 @@
 #define __must_check		__attribute__((warn_unused_result))
 #endif
 
+#ifdef CONFIG_GCOV_KERNEL
+# if __GNUC_MINOR__ < 4
+#   error "GCOV profiling support for gcc versions below 3.4 not included"
+# endif /* __GNUC_MINOR__ */
+#endif /* CONFIG_GCOV_KERNEL */
+
 /*
  * A trick to suppress uninitialized variable warning without generating any
  * code
diff --git a/include/linux/cpu.h b/include/linux/cpu.h
index 2643d848df9..4d668e05d45 100644
--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h
@@ -69,7 +69,6 @@ static inline void unregister_cpu_notifier(struct notifier_block *nb)
 
 int cpu_up(unsigned int cpu);
 void notify_cpu_starting(unsigned int cpu);
-extern void cpu_hotplug_init(void);
 extern void cpu_maps_update_begin(void);
 extern void cpu_maps_update_done(void);
 
@@ -84,10 +83,6 @@ static inline void unregister_cpu_notifier(struct notifier_block *nb)
 {
 }
 
-static inline void cpu_hotplug_init(void)
-{
-}
-
 static inline void cpu_maps_update_begin(void)
 {
 }
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index 8083b6a36a3..07dfd460d28 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -63,24 +63,26 @@ struct dma_map_ops {
 
 #define DMA_BIT_MASK(n)	(((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
 
+typedef u64 DMA_nnBIT_MASK __deprecated;
+
 /*
  * NOTE: do not use the below macros in new code and do not add new definitions
  * here.
  *
  * Instead, just open-code DMA_BIT_MASK(n) within your driver
  */
-#define DMA_64BIT_MASK	DMA_BIT_MASK(64)
-#define DMA_48BIT_MASK	DMA_BIT_MASK(48)
-#define DMA_47BIT_MASK	DMA_BIT_MASK(47)
-#define DMA_40BIT_MASK	DMA_BIT_MASK(40)
-#define DMA_39BIT_MASK	DMA_BIT_MASK(39)
-#define DMA_35BIT_MASK	DMA_BIT_MASK(35)
-#define DMA_32BIT_MASK	DMA_BIT_MASK(32)
-#define DMA_31BIT_MASK	DMA_BIT_MASK(31)
-#define DMA_30BIT_MASK	DMA_BIT_MASK(30)
-#define DMA_29BIT_MASK	DMA_BIT_MASK(29)
-#define DMA_28BIT_MASK	DMA_BIT_MASK(28)
-#define DMA_24BIT_MASK	DMA_BIT_MASK(24)
+#define DMA_64BIT_MASK	(DMA_nnBIT_MASK)DMA_BIT_MASK(64)
+#define DMA_48BIT_MASK	(DMA_nnBIT_MASK)DMA_BIT_MASK(48)
+#define DMA_47BIT_MASK	(DMA_nnBIT_MASK)DMA_BIT_MASK(47)
+#define DMA_40BIT_MASK	(DMA_nnBIT_MASK)DMA_BIT_MASK(40)
+#define DMA_39BIT_MASK	(DMA_nnBIT_MASK)DMA_BIT_MASK(39)
+#define DMA_35BIT_MASK	(DMA_nnBIT_MASK)DMA_BIT_MASK(35)
+#define DMA_32BIT_MASK	(DMA_nnBIT_MASK)DMA_BIT_MASK(32)
+#define DMA_31BIT_MASK	(DMA_nnBIT_MASK)DMA_BIT_MASK(31)
+#define DMA_30BIT_MASK	(DMA_nnBIT_MASK)DMA_BIT_MASK(30)
+#define DMA_29BIT_MASK	(DMA_nnBIT_MASK)DMA_BIT_MASK(29)
+#define DMA_28BIT_MASK	(DMA_nnBIT_MASK)DMA_BIT_MASK(28)
+#define DMA_24BIT_MASK	(DMA_nnBIT_MASK)DMA_BIT_MASK(24)
 
 #define DMA_MASK_NONE	0x0ULL
 
@@ -107,9 +109,20 @@ static inline int is_buffer_dma_capable(u64 mask, dma_addr_t addr, size_t size)
 #include <asm-generic/dma-mapping-broken.h>
 #endif
 
-/* Backwards compat, remove in 2.7.x */
-#define dma_sync_single		dma_sync_single_for_cpu
-#define dma_sync_sg		dma_sync_sg_for_cpu
+/* for backwards compatibility, removed soon */
+static inline void __deprecated dma_sync_single(struct device *dev,
+						dma_addr_t addr, size_t size,
+						enum dma_data_direction dir)
+{
+	dma_sync_single_for_cpu(dev, addr, size, dir);
+}
+
+static inline void __deprecated dma_sync_sg(struct device *dev,
+					    struct scatterlist *sg, int nelems,
+					    enum dma_data_direction dir)
+{
+	dma_sync_sg_for_cpu(dev, sg, nelems, dir);
+}
 
 static inline u64 dma_get_mask(struct device *dev)
 {
diff --git a/include/linux/dma_remapping.h b/include/linux/dma_remapping.h
index 1a455f1f86d..5619f852273 100644
--- a/include/linux/dma_remapping.h
+++ b/include/linux/dma_remapping.h
@@ -13,6 +13,10 @@
 #define DMA_PTE_WRITE (2)
 #define DMA_PTE_SNP (1 << 11)
 
+#define CONTEXT_TT_MULTI_LEVEL	0
+#define CONTEXT_TT_DEV_IOTLB	1
+#define CONTEXT_TT_PASS_THROUGH 2
+
 struct intel_iommu;
 struct dmar_domain;
 struct root_entry;
@@ -21,11 +25,16 @@ extern void free_dmar_iommu(struct intel_iommu *iommu);
 
 #ifdef CONFIG_DMAR
 extern int iommu_calculate_agaw(struct intel_iommu *iommu);
+extern int iommu_calculate_max_sagaw(struct intel_iommu *iommu);
 #else
 static inline int iommu_calculate_agaw(struct intel_iommu *iommu)
 {
 	return 0;
 }
+static inline int iommu_calculate_max_sagaw(struct intel_iommu *iommu)
+{
+	return 0;
+}
 #endif
 
 extern int dmar_disabled;
diff --git a/include/linux/dmar.h b/include/linux/dmar.h
index 10ff5c49882..1731fb5fd77 100644
--- a/include/linux/dmar.h
+++ b/include/linux/dmar.h
@@ -188,6 +188,15 @@ struct dmar_rmrr_unit {
 
 #define for_each_rmrr_units(rmrr) \
 	list_for_each_entry(rmrr, &dmar_rmrr_units, list)
+
+struct dmar_atsr_unit {
+	struct list_head list;		/* list of ATSR units */
+	struct acpi_dmar_header *hdr;	/* ACPI header */
+	struct pci_dev **devices;	/* target devices */
+	int devices_cnt;		/* target device count */
+	u8 include_all:1;		/* include all ports */
+};
+
 /* Intel DMAR  initialization functions */
 extern int intel_iommu_init(void);
 #else
diff --git a/include/linux/efi.h b/include/linux/efi.h
index bb66feb164b..ce4581fbc08 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -101,7 +101,7 @@ typedef struct {
 	u64 attribute;
 } efi_memory_desc_t;
 
-typedef int (*efi_freemem_callback_t) (unsigned long start, unsigned long end, void *arg);
+typedef int (*efi_freemem_callback_t) (u64 start, u64 end, void *arg);
 
 /*
  * Types and defines for Time Services
diff --git a/include/linux/firewire.h b/include/linux/firewire.h
index e584b7215e8..9823946adbc 100644
--- a/include/linux/firewire.h
+++ b/include/linux/firewire.h
@@ -3,6 +3,7 @@
 
 #include <linux/completion.h>
 #include <linux/device.h>
+#include <linux/dma-mapping.h>
 #include <linux/kernel.h>
 #include <linux/kref.h>
 #include <linux/list.h>
@@ -355,4 +356,90 @@ int fw_run_transaction(struct fw_card *card, int tcode, int destination_id,
 		       int generation, int speed, unsigned long long offset,
 		       void *payload, size_t length);
 
+static inline int fw_stream_packet_destination_id(int tag, int channel, int sy)
+{
+	return tag << 14 | channel << 8 | sy;
+}
+
+struct fw_descriptor {
+	struct list_head link;
+	size_t length;
+	u32 immediate;
+	u32 key;
+	const u32 *data;
+};
+
+int fw_core_add_descriptor(struct fw_descriptor *desc);
+void fw_core_remove_descriptor(struct fw_descriptor *desc);
+
+/*
+ * The iso packet format allows for an immediate header/payload part
+ * stored in 'header' immediately after the packet info plus an
+ * indirect payload part that is pointer to by the 'payload' field.
+ * Applications can use one or the other or both to implement simple
+ * low-bandwidth streaming (e.g. audio) or more advanced
+ * scatter-gather streaming (e.g. assembling video frame automatically).
+ */
+struct fw_iso_packet {
+	u16 payload_length;	/* Length of indirect payload. */
+	u32 interrupt:1;	/* Generate interrupt on this packet */
+	u32 skip:1;		/* Set to not send packet at all. */
+	u32 tag:2;
+	u32 sy:4;
+	u32 header_length:8;	/* Length of immediate header. */
+	u32 header[0];
+};
+
+#define FW_ISO_CONTEXT_TRANSMIT	0
+#define FW_ISO_CONTEXT_RECEIVE	1
+
+#define FW_ISO_CONTEXT_MATCH_TAG0	 1
+#define FW_ISO_CONTEXT_MATCH_TAG1	 2
+#define FW_ISO_CONTEXT_MATCH_TAG2	 4
+#define FW_ISO_CONTEXT_MATCH_TAG3	 8
+#define FW_ISO_CONTEXT_MATCH_ALL_TAGS	15
+
+/*
+ * An iso buffer is just a set of pages mapped for DMA in the
+ * specified direction.  Since the pages are to be used for DMA, they
+ * are not mapped into the kernel virtual address space.  We store the
+ * DMA address in the page private. The helper function
+ * fw_iso_buffer_map() will map the pages into a given vma.
+ */
+struct fw_iso_buffer {
+	enum dma_data_direction direction;
+	struct page **pages;
+	int page_count;
+};
+
+int fw_iso_buffer_init(struct fw_iso_buffer *buffer, struct fw_card *card,
+		       int page_count, enum dma_data_direction direction);
+void fw_iso_buffer_destroy(struct fw_iso_buffer *buffer, struct fw_card *card);
+
+struct fw_iso_context;
+typedef void (*fw_iso_callback_t)(struct fw_iso_context *context,
+				  u32 cycle, size_t header_length,
+				  void *header, void *data);
+struct fw_iso_context {
+	struct fw_card *card;
+	int type;
+	int channel;
+	int speed;
+	size_t header_size;
+	fw_iso_callback_t callback;
+	void *callback_data;
+};
+
+struct fw_iso_context *fw_iso_context_create(struct fw_card *card,
+		int type, int channel, int speed, size_t header_size,
+		fw_iso_callback_t callback, void *callback_data);
+int fw_iso_context_queue(struct fw_iso_context *ctx,
+			 struct fw_iso_packet *packet,
+			 struct fw_iso_buffer *buffer,
+			 unsigned long payload);
+int fw_iso_context_start(struct fw_iso_context *ctx,
+			 int cycle, int sync, int tags);
+int fw_iso_context_stop(struct fw_iso_context *ctx);
+void fw_iso_context_destroy(struct fw_iso_context *ctx);
+
 #endif /* _LINUX_FIREWIRE_H */
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 74a57938c88..1ff5e4e0195 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1107,6 +1107,7 @@ extern void locks_copy_lock(struct file_lock *, struct file_lock *);
 extern void __locks_copy_lock(struct file_lock *, const struct file_lock *);
 extern void locks_remove_posix(struct file *, fl_owner_t);
 extern void locks_remove_flock(struct file *);
+extern void locks_release_private(struct file_lock *);
 extern void posix_test_lock(struct file *, struct file_lock *);
 extern int posix_lock_file(struct file *, struct file_lock *, struct file_lock *);
 extern int posix_lock_file_wait(struct file *, struct file_lock *);
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index 244677cc082..43fc95d822d 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -79,10 +79,6 @@ struct fsl_spi_platform_data {
 	u16	max_chipselect;
 	void	(*cs_control)(struct spi_device *spi, bool on);
 	u32	sysclk;
-
-	/* Legacy hooks, used by mpc52xx_psc_spi driver. */
-	void	(*activate_cs)(u8 cs, u8 polarity);
-	void	(*deactivate_cs)(u8 cs, u8 polarity);
 };
 
 struct mpc8xx_pcmcia_ops {
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index 39b95c56587..dc3b1328aae 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -362,6 +362,7 @@ struct ftrace_ret_stack {
 	unsigned long func;
 	unsigned long long calltime;
 	unsigned long long subtime;
+	unsigned long fp;
 };
 
 /*
@@ -372,7 +373,8 @@ struct ftrace_ret_stack {
 extern void return_to_handler(void);
 
 extern int
-ftrace_push_return_trace(unsigned long ret, unsigned long func, int *depth);
+ftrace_push_return_trace(unsigned long ret, unsigned long func, int *depth,
+			 unsigned long frame_pointer);
 
 /*
  * Sometimes we don't want to trace a function with the function
diff --git a/include/linux/gameport.h b/include/linux/gameport.h
index 0cd825f7363..1bc08541c2b 100644
--- a/include/linux/gameport.h
+++ b/include/linux/gameport.h
@@ -11,6 +11,7 @@
 
 #ifdef __KERNEL__
 #include <asm/io.h>
+#include <linux/types.h>
 #include <linux/list.h>
 #include <linux/mutex.h>
 #include <linux/device.h>
@@ -62,7 +63,7 @@ struct gameport_driver {
 
 	struct device_driver driver;
 
-	unsigned int ignore;
+	bool ignore;
 };
 #define to_gameport_driver(d)	container_of(d, struct gameport_driver, driver)
 
diff --git a/include/linux/gcd.h b/include/linux/gcd.h
new file mode 100644
index 00000000000..69f5e8a01ba
--- /dev/null
+++ b/include/linux/gcd.h
@@ -0,0 +1,8 @@
+#ifndef _GCD_H
+#define _GCD_H
+
+#include <linux/compiler.h>
+
+unsigned long gcd(unsigned long a, unsigned long b) __attribute_const__;
+
+#endif /* _GCD_H */
diff --git a/include/linux/gfp.h b/include/linux/gfp.h
index cfdb35d71bc..7c777a0da17 100644
--- a/include/linux/gfp.h
+++ b/include/linux/gfp.h
@@ -99,7 +99,7 @@ struct vm_area_struct;
 			__GFP_NORETRY|__GFP_NOMEMALLOC)
 
 /* Control slab gfp mask during early boot */
-#define SLAB_GFP_BOOT_MASK __GFP_BITS_MASK & ~(__GFP_WAIT|__GFP_IO|__GFP_FS)
+#define GFP_BOOT_MASK __GFP_BITS_MASK & ~(__GFP_WAIT|__GFP_IO|__GFP_FS)
 
 /* Control allocation constraints */
 #define GFP_CONSTRAINT_MASK (__GFP_HARDWALL|__GFP_THISNODE)
@@ -348,4 +348,11 @@ static inline void oom_killer_enable(void)
 	oom_killer_disabled = false;
 }
 
+extern gfp_t gfp_allowed_mask;
+
+static inline void set_gfp_allowed_mask(gfp_t mask)
+{
+	gfp_allowed_mask = mask;
+}
+
 #endif /* __LINUX_GFP_H */
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index a05a5ef3339..2723513a565 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -33,7 +33,7 @@ void hugetlb_report_meminfo(struct seq_file *);
 int hugetlb_report_node_meminfo(int, char *);
 unsigned long hugetlb_total_pages(void);
 int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
-			unsigned long address, int write_access);
+			unsigned long address, unsigned int flags);
 int hugetlb_reserve_pages(struct inode *inode, long from, long to,
 						struct vm_area_struct *vma,
 						int acctflags);
@@ -98,7 +98,7 @@ static inline void hugetlb_report_meminfo(struct seq_file *m)
 #define pud_huge(x)	0
 #define is_hugepage_only_range(mm, addr, len)	0
 #define hugetlb_free_pgd_range(tlb, addr, end, floor, ceiling) ({BUG(); 0; })
-#define hugetlb_fault(mm, vma, addr, write)	({ BUG(); 0; })
+#define hugetlb_fault(mm, vma, addr, flags)	({ BUG(); 0; })
 
 #define hugetlb_change_protection(vma, address, end, newprot)
 
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index ad258059603..f4784c0fe97 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -47,6 +47,7 @@ struct i2c_driver;
 union i2c_smbus_data;
 struct i2c_board_info;
 
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 /*
  * The master routines are the ones normally used to transmit data to devices
  * on a bus (or read from them). Apart from two basic transfer functions to
@@ -93,6 +94,7 @@ extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client,
 extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client,
 					  u8 command, u8 length,
 					  const u8 *values);
+#endif /* I2C */
 
 /**
  * struct i2c_driver - represent an I2C device driver
@@ -100,9 +102,8 @@ extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client,
  * @class: What kind of i2c device we instantiate (for detect)
  * @attach_adapter: Callback for bus addition (for legacy drivers)
  * @detach_adapter: Callback for bus removal (for legacy drivers)
- * @detach_client: Callback for device removal (for legacy drivers)
- * @probe: Callback for device binding (new-style drivers)
- * @remove: Callback for device unbinding (new-style drivers)
+ * @probe: Callback for device binding
+ * @remove: Callback for device unbinding
  * @shutdown: Callback for device shutdown
  * @suspend: Callback for device suspend
  * @resume: Callback for device resume
@@ -137,26 +138,14 @@ struct i2c_driver {
 	int id;
 	unsigned int class;
 
-	/* Notifies the driver that a new bus has appeared. This routine
-	 * can be used by the driver to test if the bus meets its conditions
-	 * & seek for the presence of the chip(s) it supports. If found, it
-	 * registers the client(s) that are on the bus to the i2c admin. via
-	 * i2c_attach_client.  (LEGACY I2C DRIVERS ONLY)
+	/* Notifies the driver that a new bus has appeared or is about to be
+	 * removed. You should avoid using this if you can, it will probably
+	 * be removed in a near future.
 	 */
 	int (*attach_adapter)(struct i2c_adapter *);
 	int (*detach_adapter)(struct i2c_adapter *);
 
-	/* tells the driver that a client is about to be deleted & gives it
-	 * the chance to remove its private data. Also, if the client struct
-	 * has been dynamically allocated by the driver in the function above,
-	 * it must be freed here.  (LEGACY I2C DRIVERS ONLY)
-	 */
-	int (*detach_client)(struct i2c_client *) __deprecated;
-
-	/* Standard driver model interfaces, for "new style" i2c drivers.
-	 * With the driver model, device enumeration is NEVER done by drivers;
-	 * it's done by infrastructure.  (NEW STYLE DRIVERS ONLY)
-	 */
+	/* Standard driver model interfaces */
 	int (*probe)(struct i2c_client *, const struct i2c_device_id *);
 	int (*remove)(struct i2c_client *);
 
@@ -191,9 +180,8 @@ struct i2c_driver {
  * @driver: device's driver, hence pointer to access routines
  * @dev: Driver model device node for the slave.
  * @irq: indicates the IRQ generated by this device (if any)
- * @list: list of active/busy clients (DEPRECATED)
- * @detected: member of an i2c_driver.clients list
- * @released: used to synchronize client releases & detaches and references
+ * @detected: member of an i2c_driver.clients list or i2c-core's
+ *	userspace_devices list
  *
  * An i2c_client identifies a single device (i.e. chip) connected to an
  * i2c bus. The behaviour exposed to Linux is defined by the driver
@@ -209,9 +197,7 @@ struct i2c_client {
 	struct i2c_driver *driver;	/* and our access routines	*/
 	struct device dev;		/* the device structure		*/
 	int irq;			/* irq issued by device		*/
-	struct list_head list;		/* DEPRECATED */
 	struct list_head detected;
-	struct completion released;
 };
 #define to_i2c_client(d) container_of(d, struct i2c_client, dev)
 
@@ -248,11 +234,10 @@ static inline void i2c_set_clientdata(struct i2c_client *dev, void *data)
  * that, such as chip type, configuration, associated IRQ, and so on.
  *
  * i2c_board_info is used to build tables of information listing I2C devices
- * that are present.  This information is used to grow the driver model tree
- * for "new style" I2C drivers.  For mainboards this is done statically using
- * i2c_register_board_info(); bus numbers identify adapters that aren't
- * yet available.  For add-on boards, i2c_new_device() does this dynamically
- * with the adapter already known.
+ * that are present.  This information is used to grow the driver model tree.
+ * For mainboards this is done statically using i2c_register_board_info();
+ * bus numbers identify adapters that aren't yet available.  For add-on boards,
+ * i2c_new_device() does this dynamically with the adapter already known.
  */
 struct i2c_board_info {
 	char		type[I2C_NAME_SIZE];
@@ -277,6 +262,7 @@ struct i2c_board_info {
 	.type = dev_type, .addr = (dev_addr)
 
 
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 /* Add-on boards should register/unregister their devices; e.g. a board
  * with integrated I2C, a config eeprom, sensors, and a codec that's
  * used in conjunction with the primary hardware.
@@ -300,6 +286,7 @@ extern struct i2c_client *
 i2c_new_dummy(struct i2c_adapter *adap, u16 address);
 
 extern void i2c_unregister_device(struct i2c_client *);
+#endif /* I2C */
 
 /* Mainboard arch_initcall() code should register all its I2C devices.
  * This is done at arch_initcall time, before declaring any i2c adapters.
@@ -316,7 +303,7 @@ i2c_register_board_info(int busnum, struct i2c_board_info const *info,
 {
 	return 0;
 }
-#endif
+#endif /* I2C_BOARDINFO */
 
 /*
  * The following structs are for those who like to implement new bus drivers:
@@ -352,21 +339,15 @@ struct i2c_adapter {
 	const struct i2c_algorithm *algo; /* the algorithm to access the bus */
 	void *algo_data;
 
-	/* --- administration stuff. */
-	int (*client_register)(struct i2c_client *) __deprecated;
-	int (*client_unregister)(struct i2c_client *) __deprecated;
-
 	/* data fields that are valid for all devices	*/
 	u8 level; 			/* nesting level for lockdep */
 	struct mutex bus_lock;
-	struct mutex clist_lock;
 
 	int timeout;			/* in jiffies */
 	int retries;
 	struct device dev;		/* the adapter device */
 
 	int nr;
-	struct list_head clients;	/* DEPRECATED */
 	char name[48];
 	struct completion dev_released;
 };
@@ -412,11 +393,16 @@ struct i2c_client_address_data {
 /* The numbers to use to set I2C bus address */
 #define ANY_I2C_BUS		0xffff
 
+/* Construct an I2C_CLIENT_END-terminated array of i2c addresses */
+#define I2C_ADDRS(addr, addrs...) \
+	((const unsigned short []){ addr, ## addrs, I2C_CLIENT_END })
+
 
 /* ----- functions exported by i2c.o */
 
 /* administration...
  */
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 extern int i2c_add_adapter(struct i2c_adapter *);
 extern int i2c_del_adapter(struct i2c_adapter *);
 extern int i2c_add_numbered_adapter(struct i2c_adapter *);
@@ -429,11 +415,6 @@ static inline int i2c_add_driver(struct i2c_driver *driver)
 	return i2c_register_driver(THIS_MODULE, driver);
 }
 
-/* These are deprecated, your driver should use the standard .probe()
- * and .remove() methods instead. */
-extern int __deprecated i2c_attach_client(struct i2c_client *);
-extern int __deprecated i2c_detach_client(struct i2c_client *);
-
 extern struct i2c_client *i2c_use_client(struct i2c_client *client);
 extern void i2c_release_client(struct i2c_client *client);
 
@@ -442,14 +423,6 @@ extern void i2c_release_client(struct i2c_client *client);
 extern void i2c_clients_command(struct i2c_adapter *adap,
 				unsigned int cmd, void *arg);
 
-/* Detect function. It iterates over all possible addresses itself.
- * It will only call found_proc if some client is connected at the
- * specific address (unless a 'force' matched);
- */
-extern int i2c_probe(struct i2c_adapter *adapter,
-		const struct i2c_client_address_data *address_data,
-		int (*found_proc) (struct i2c_adapter *, int, int));
-
 extern struct i2c_adapter *i2c_get_adapter(int id);
 extern void i2c_put_adapter(struct i2c_adapter *adap);
 
@@ -471,6 +444,7 @@ static inline int i2c_adapter_id(struct i2c_adapter *adap)
 {
 	return adap->nr;
 }
+#endif /* I2C */
 #endif /* __KERNEL__ */
 
 /**
diff --git a/include/linux/i2c/lm8323.h b/include/linux/i2c/lm8323.h
new file mode 100644
index 00000000000..478d668bc59
--- /dev/null
+++ b/include/linux/i2c/lm8323.h
@@ -0,0 +1,46 @@
+/*
+ * lm8323.h - Configuration for LM8323 keypad driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation (version 2 of the License only).
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __LINUX_LM8323_H
+#define __LINUX_LM8323_H
+
+#include <linux/types.h>
+
+/*
+ * Largest keycode that the chip can send, plus one,
+ * so keys can be mapped directly at the index of the
+ * LM8323 keycode instead of subtracting one.
+ */
+#define LM8323_KEYMAP_SIZE	(0x7f + 1)
+
+#define LM8323_NUM_PWMS		3
+
+struct lm8323_platform_data {
+	int debounce_time; /* Time to watch for key bouncing, in ms. */
+	int active_time; /* Idle time until sleep, in ms. */
+
+	int size_x;
+	int size_y;
+	bool repeat;
+	const unsigned short *keymap;
+
+	const char *pwm_names[LM8323_NUM_PWMS];
+
+	const char *name; /* Device name. */
+};
+
+#endif /* __LINUX_LM8323_H */
diff --git a/include/linux/i2c/pca953x.h b/include/linux/i2c/pca953x.h
index 3c7361217df..81736d6a8db 100644
--- a/include/linux/i2c/pca953x.h
+++ b/include/linux/i2c/pca953x.h
@@ -15,4 +15,5 @@ struct pca953x_platform_data {
 	int		(*teardown)(struct i2c_client *client,
 				unsigned gpio, unsigned ngpio,
 				void *context);
+	char		**names;
 };
diff --git a/include/linux/ide.h b/include/linux/ide.h
index a6c6a2fad7c..95c6e00a72e 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -157,12 +157,6 @@ enum {
 #define REQ_UNPARK_HEADS	0x23
 
 /*
- * Check for an interrupt and acknowledge the interrupt status
- */
-struct hwif_s;
-typedef int (ide_ack_intr_t)(struct hwif_s *);
-
-/*
  * hwif_chipset_t is used to keep track of the specific hardware
  * chipset used by each IDE interface, if known.
  */
@@ -185,7 +179,6 @@ struct ide_hw {
 	};
 
 	int		irq;			/* our irq number */
-	ide_ack_intr_t	*ack_intr;		/* acknowledge interrupt */
 	struct device	*dev, *parent;
 	unsigned long	config;
 };
@@ -331,11 +324,6 @@ enum {
 	PC_FLAG_WRITING			= (1 << 6),
 };
 
-/*
- * With each packet command, we allocate a buffer of IDE_PC_BUFFER_SIZE bytes.
- * This is used for several packet commands (not for READ/WRITE commands).
- */
-#define IDE_PC_BUFFER_SIZE	64
 #define ATAPI_WAIT_PC		(60 * HZ)
 
 struct ide_atapi_pc {
@@ -347,12 +335,6 @@ struct ide_atapi_pc {
 
 	/* bytes to transfer */
 	int req_xfer;
-	/* bytes actually transferred */
-	int xferred;
-
-	/* data buffer */
-	u8 *buf;
-	int buf_size;
 
 	/* the corresponding request */
 	struct request *rq;
@@ -363,8 +345,6 @@ struct ide_atapi_pc {
 	 * those are more or less driver-specific and some of them are subject
 	 * to change/removal later.
 	 */
-	u8 pc_buf[IDE_PC_BUFFER_SIZE];
-
 	unsigned long timeout;
 };
 
@@ -552,7 +532,7 @@ struct ide_drive_s {
 
 	unsigned int	bios_cyl;	/* BIOS/fdisk/LILO number of cyls */
 	unsigned int	cyl;		/* "real" number of cyls */
-	unsigned int	drive_data;	/* used by set_pio_mode/dev_select() */
+	void		*drive_data;	/* used by set_pio_mode/dev_select() */
 	unsigned int	failures;	/* current failure count */
 	unsigned int	max_failures;	/* maximum allowed failure count */
 	u64		probed_capacity;/* initial/native media capacity */
@@ -649,6 +629,7 @@ struct ide_port_ops {
 	void	(*maskproc)(ide_drive_t *, int);
 	void	(*quirkproc)(ide_drive_t *);
 	void	(*clear_irq)(ide_drive_t *);
+	int	(*test_irq)(struct hwif_s *);
 
 	u8	(*mdma_filter)(ide_drive_t *);
 	u8	(*udma_filter)(ide_drive_t *);
@@ -674,6 +655,10 @@ struct ide_dma_ops {
 	u8	(*dma_sff_read_status)(struct hwif_s *);
 };
 
+enum {
+	IDE_PFLAG_PROBING		= (1 << 0),
+};
+
 struct ide_host;
 
 typedef struct hwif_s {
@@ -690,6 +675,8 @@ typedef struct hwif_s {
 
 	ide_drive_t	*devices[MAX_DRIVES + 1];
 
+	unsigned long	port_flags;
+
 	u8 major;	/* our major number */
 	u8 index;	/* 0 for ide0; 1 for ide1; ... */
 	u8 channel;	/* for dual-port chips: 0=primary, 1=secondary */
@@ -708,8 +695,6 @@ typedef struct hwif_s {
 
 	struct device *dev;
 
-	ide_ack_intr_t *ack_intr;
-
 	void (*rw_disk)(ide_drive_t *, struct request *);
 
 	const struct ide_tp_ops		*tp_ops;
@@ -1130,6 +1115,8 @@ void SELECT_MASK(ide_drive_t *, int);
 u8 ide_read_error(ide_drive_t *);
 void ide_read_bcount_and_ireason(ide_drive_t *, u16 *, u8 *);
 
+int ide_check_ireason(ide_drive_t *, struct request *, int, int, int);
+
 int ide_check_atapi_device(ide_drive_t *, const char *);
 
 void ide_init_pc(struct ide_atapi_pc *);
@@ -1154,7 +1141,8 @@ enum {
 	REQ_IDETAPE_WRITE	= (1 << 3),
 };
 
-int ide_queue_pc_tail(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *);
+int ide_queue_pc_tail(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *,
+		      void *, unsigned int);
 
 int ide_do_test_unit_ready(ide_drive_t *, struct gendisk *);
 int ide_do_start_stop(ide_drive_t *, struct gendisk *, int);
@@ -1524,6 +1512,7 @@ int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int);
 int ide_scan_pio_blacklist(char *);
 const char *ide_xfer_verbose(u8);
 u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8);
+int ide_pio_need_iordy(ide_drive_t *, const u8);
 int ide_set_pio_mode(ide_drive_t *, u8);
 int ide_set_dma_mode(ide_drive_t *, u8);
 void ide_set_pio(ide_drive_t *, u8);
@@ -1561,6 +1550,16 @@ static inline ide_drive_t *ide_get_pair_dev(ide_drive_t *drive)
 	return (peer->dev_flags & IDE_DFLAG_PRESENT) ? peer : NULL;
 }
 
+static inline void *ide_get_drivedata(ide_drive_t *drive)
+{
+	return drive->drive_data;
+}
+
+static inline void ide_set_drivedata(ide_drive_t *drive, void *data)
+{
+	drive->drive_data = data;
+}
+
 #define ide_port_for_each_dev(i, dev, port) \
 	for ((i) = 0; ((dev) = (port)->devices[i]) || (i) < MAX_DRIVES; (i)++)
 
diff --git a/include/linux/init.h b/include/linux/init.h
index 8c2c9989626..13b633ed695 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -134,6 +134,9 @@ typedef void (*exitcall_t)(void);
 extern initcall_t __con_initcall_start[], __con_initcall_end[];
 extern initcall_t __security_initcall_start[], __security_initcall_end[];
 
+/* Used for contructor calls. */
+typedef void (*ctor_fn_t)(void);
+
 /* Defined in init/main.c */
 extern int do_one_initcall(initcall_t fn);
 extern char __initdata boot_command_line[];
diff --git a/include/linux/input.h b/include/linux/input.h
index 6fed4f6a9c9..8b3bc3e0d14 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -53,6 +53,7 @@ struct input_absinfo {
 	__s32 maximum;
 	__s32 fuzz;
 	__s32 flat;
+	__s32 resolution;
 };
 
 #define EVIOCGVERSION		_IOR('E', 0x01, int)			/* get driver version */
@@ -1109,6 +1110,7 @@ struct input_dev {
 	int absmin[ABS_MAX + 1];
 	int absfuzz[ABS_MAX + 1];
 	int absflat[ABS_MAX + 1];
+	int absres[ABS_MAX + 1];
 
 	int (*open)(struct input_dev *dev);
 	void (*close)(struct input_dev *dev);
diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h
index aa8c5317123..482dc91fd53 100644
--- a/include/linux/intel-iommu.h
+++ b/include/linux/intel-iommu.h
@@ -53,6 +53,7 @@
 #define	DMAR_PHMLIMIT_REG 0x78	/* pmrr high limit */
 #define DMAR_IQH_REG	0x80	/* Invalidation queue head register */
 #define DMAR_IQT_REG	0x88	/* Invalidation queue tail register */
+#define DMAR_IQ_SHIFT	4	/* Invalidation queue head/tail shift */
 #define DMAR_IQA_REG	0x90	/* Invalidation queue addr register */
 #define DMAR_ICS_REG	0x98	/* Invalidation complete status register */
 #define DMAR_IRTA_REG	0xb8    /* Interrupt remapping table addr register */
@@ -120,8 +121,10 @@ static inline void dmar_writeq(void __iomem *addr, u64 val)
 	(ecap_iotlb_offset(e) + ecap_niotlb_iunits(e) * 16)
 #define ecap_coherent(e)	((e) & 0x1)
 #define ecap_qis(e)		((e) & 0x2)
+#define ecap_pass_through(e)	((e >> 6) & 0x1)
 #define ecap_eim_support(e)	((e >> 4) & 0x1)
 #define ecap_ir_support(e)	((e >> 3) & 0x1)
+#define ecap_dev_iotlb_support(e)	(((e) >> 2) & 0x1)
 #define ecap_max_handle_mask(e) ((e >> 20) & 0xf)
 #define ecap_sc_support(e)	((e >> 7) & 0x1) /* Snooping Control */
 
@@ -197,6 +200,8 @@ static inline void dmar_writeq(void __iomem *addr, u64 val)
 #define DMA_FSTS_PPF ((u32)2)
 #define DMA_FSTS_PFO ((u32)1)
 #define DMA_FSTS_IQE (1 << 4)
+#define DMA_FSTS_ICE (1 << 5)
+#define DMA_FSTS_ITE (1 << 6)
 #define dma_fsts_fault_record_index(s) (((s) >> 8) & 0xff)
 
 /* FRCD_REG, 32 bits access */
@@ -225,7 +230,8 @@ do {									\
 enum {
 	QI_FREE,
 	QI_IN_USE,
-	QI_DONE
+	QI_DONE,
+	QI_ABORT
 };
 
 #define QI_CC_TYPE		0x1
@@ -254,6 +260,12 @@ enum {
 #define QI_CC_DID(did)		(((u64)did) << 16)
 #define QI_CC_GRAN(gran)	(((u64)gran) >> (DMA_CCMD_INVL_GRANU_OFFSET-4))
 
+#define QI_DEV_IOTLB_SID(sid)	((u64)((sid) & 0xffff) << 32)
+#define QI_DEV_IOTLB_QDEP(qdep)	(((qdep) & 0x1f) << 16)
+#define QI_DEV_IOTLB_ADDR(addr)	((u64)(addr) & VTD_PAGE_MASK)
+#define QI_DEV_IOTLB_SIZE	1
+#define QI_DEV_IOTLB_MAX_INVS	32
+
 struct qi_desc {
 	u64 low, high;
 };
@@ -280,10 +292,10 @@ struct ir_table {
 #endif
 
 struct iommu_flush {
-	int (*flush_context)(struct intel_iommu *iommu, u16 did, u16 sid, u8 fm,
-		u64 type, int non_present_entry_flush);
-	int (*flush_iotlb)(struct intel_iommu *iommu, u16 did, u64 addr,
-		unsigned int size_order, u64 type, int non_present_entry_flush);
+	void (*flush_context)(struct intel_iommu *iommu, u16 did, u16 sid,
+			      u8 fm, u64 type);
+	void (*flush_iotlb)(struct intel_iommu *iommu, u16 did, u64 addr,
+			    unsigned int size_order, u64 type);
 };
 
 enum {
@@ -302,6 +314,7 @@ struct intel_iommu {
 	spinlock_t	register_lock; /* protect register handling */
 	int		seq_id;	/* sequence id of the iommu */
 	int		agaw; /* agaw of this iommu */
+	int		msagaw; /* max sagaw of this iommu */
 	unsigned int 	irq;
 	unsigned char 	name[13];    /* Device Name */
 
@@ -329,6 +342,7 @@ static inline void __iommu_flush_cache(
 }
 
 extern struct dmar_drhd_unit * dmar_find_matched_drhd_unit(struct pci_dev *dev);
+extern int dmar_find_matched_atsr_unit(struct pci_dev *dev);
 
 extern int alloc_iommu(struct dmar_drhd_unit *drhd);
 extern void free_iommu(struct intel_iommu *iommu);
@@ -337,11 +351,12 @@ extern void dmar_disable_qi(struct intel_iommu *iommu);
 extern int dmar_reenable_qi(struct intel_iommu *iommu);
 extern void qi_global_iec(struct intel_iommu *iommu);
 
-extern int qi_flush_context(struct intel_iommu *iommu, u16 did, u16 sid,
-			        u8 fm, u64 type, int non_present_entry_flush);
-extern int qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr,
-			  unsigned int size_order, u64 type,
-			  int non_present_entry_flush);
+extern void qi_flush_context(struct intel_iommu *iommu, u16 did, u16 sid,
+			     u8 fm, u64 type);
+extern void qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr,
+			  unsigned int size_order, u64 type);
+extern void qi_flush_dev_iotlb(struct intel_iommu *iommu, u16 sid, u16 qdep,
+			       u64 addr, unsigned mask);
 
 extern int qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu);
 
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index 32e4b2f7229..786e7b8cece 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -49,6 +49,8 @@ struct resource_list {
 #define IORESOURCE_SIZEALIGN	0x00020000	/* size indicates alignment */
 #define IORESOURCE_STARTALIGN	0x00040000	/* start field is alignment */
 
+#define IORESOURCE_MEM_64	0x00100000
+
 #define IORESOURCE_EXCLUSIVE	0x08000000	/* Userland may not map this resource */
 #define IORESOURCE_DISABLED	0x10000000
 #define IORESOURCE_UNSET	0x20000000
diff --git a/include/linux/ipc_namespace.h b/include/linux/ipc_namespace.h
index 3bf40e246a8..e408722a84c 100644
--- a/include/linux/ipc_namespace.h
+++ b/include/linux/ipc_namespace.h
@@ -94,13 +94,8 @@ static inline int mq_init_ns(struct ipc_namespace *ns) { return 0; }
 #endif
 
 #if defined(CONFIG_IPC_NS)
-extern void free_ipc_ns(struct ipc_namespace *ns);
 extern struct ipc_namespace *copy_ipcs(unsigned long flags,
 				       struct ipc_namespace *ns);
-extern void free_ipcs(struct ipc_namespace *ns, struct ipc_ids *ids,
-		      void (*free)(struct ipc_namespace *,
-				   struct kern_ipc_perm *));
-
 static inline struct ipc_namespace *get_ipc_ns(struct ipc_namespace *ns)
 {
 	if (ns)
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 1e50c34f006..cb2e77a3f7f 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -157,7 +157,7 @@ struct irq_2_iommu;
  * @irqs_unhandled:	stats field for spurious unhandled interrupts
  * @lock:		locking for SMP
  * @affinity:		IRQ affinity on SMP
- * @cpu:		cpu index useful for balancing
+ * @node:		node index useful for balancing
  * @pending_mask:	pending rebalanced interrupts
  * @threads_active:	number of irqaction threads currently running
  * @wait_for_threads:	wait queue for sync_irq to wait for threaded handlers
@@ -423,7 +423,7 @@ extern int set_irq_msi(unsigned int irq, struct msi_desc *entry);
 /**
  * alloc_desc_masks - allocate cpumasks for irq_desc
  * @desc:	pointer to irq_desc struct
- * @cpu:	cpu which will be handling the cpumasks
+ * @node:	node which will be handling the cpumasks
  * @boot:	true if need bootmem
  *
  * Allocates affinity and pending_mask cpumask if required.
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index cc02393bfce..d97eb652d6c 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -1315,6 +1315,12 @@ extern int jbd_blocks_per_page(struct inode *inode);
 #define BUFFER_TRACE2(bh, bh2, info)	do {} while (0)
 #define JBUFFER_TRACE(jh, info)	do {} while (0)
 
+/* 
+ * jbd2_dev_to_name is a utility function used by the jbd2 and ext4 
+ * tracing infrastructure to map a dev_t to a device name.
+ */
+extern const char *jbd2_dev_to_name(dev_t device);
+
 #endif	/* __KERNEL__ */
 
 #endif	/* _LINUX_JBD2_H */
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index c5a71c38a95..fac104e7186 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -58,7 +58,7 @@ extern const char linux_proc_banner[];
 #define _RET_IP_		(unsigned long)__builtin_return_address(0)
 #define _THIS_IP_  ({ __label__ __here; __here: (unsigned long)&&__here; })
 
-#ifdef CONFIG_LBD
+#ifdef CONFIG_LBDAF
 # include <asm/div64.h>
 # define sector_div(a, b) do_div(a, b)
 #else
diff --git a/include/linux/kernel_stat.h b/include/linux/kernel_stat.h
index a77c6007dc9..348fa8874b5 100644
--- a/include/linux/kernel_stat.h
+++ b/include/linux/kernel_stat.h
@@ -5,6 +5,7 @@
 #include <linux/threads.h>
 #include <linux/percpu.h>
 #include <linux/cpumask.h>
+#include <linux/interrupt.h>
 #include <asm/irq.h>
 #include <asm/cputime.h>
 
@@ -31,6 +32,7 @@ struct kernel_stat {
 #ifndef CONFIG_GENERIC_HARDIRQS
        unsigned int irqs[NR_IRQS];
 #endif
+	unsigned int softirqs[NR_SOFTIRQS];
 };
 
 DECLARE_PER_CPU(struct kernel_stat, kstat);
@@ -67,6 +69,16 @@ extern unsigned int kstat_irqs_cpu(unsigned int irq, int cpu);
 
 #endif
 
+static inline void kstat_incr_softirqs_this_cpu(unsigned int irq)
+{
+	kstat_this_cpu.softirqs[irq]++;
+}
+
+static inline unsigned int kstat_softirqs_cpu(unsigned int irq, int cpu)
+{
+       return kstat_cpu(cpu).softirqs[irq];
+}
+
 /*
  * Number of interrupts per specific IRQ source, since bootup
  */
diff --git a/include/linux/lockd/lockd.h b/include/linux/lockd/lockd.h
index 51855dfd8ad..c325b187966 100644
--- a/include/linux/lockd/lockd.h
+++ b/include/linux/lockd/lockd.h
@@ -195,7 +195,7 @@ extern struct svc_procedure	nlmsvc_procedures4[];
 extern int			nlmsvc_grace_period;
 extern unsigned long		nlmsvc_timeout;
 extern int			nsm_use_hostnames;
-extern int			nsm_local_state;
+extern u32			nsm_local_state;
 
 /*
  * Lockd client functions
diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index 45add35dda1..e46a0734ab6 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -117,7 +117,7 @@ static inline bool mem_cgroup_disabled(void)
 }
 
 extern bool mem_cgroup_oom_called(struct task_struct *task);
-
+void mem_cgroup_update_mapped_file_stat(struct page *page, int val);
 #else /* CONFIG_CGROUP_MEM_RES_CTLR */
 struct mem_cgroup;
 
@@ -271,6 +271,11 @@ mem_cgroup_print_oom_info(struct mem_cgroup *memcg, struct task_struct *p)
 {
 }
 
+static inline void mem_cgroup_update_mapped_file_stat(struct page *page,
+							int val)
+{
+}
+
 #endif /* CONFIG_CGROUP_MEM_CONT */
 
 #endif /* _LINUX_MEMCONTROL_H */
diff --git a/include/linux/mfd/ab3100.h b/include/linux/mfd/ab3100.h
new file mode 100644
index 00000000000..7a3f316e384
--- /dev/null
+++ b/include/linux/mfd/ab3100.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * AB3100 core access functions
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#include <linux/device.h>
+
+#ifndef MFD_AB3100_H
+#define MFD_AB3100_H
+
+#define ABUNKNOWN	0
+#define	AB3000		1
+#define	AB3100		2
+
+/*
+ * AB3100, EVENTA1, A2 and A3 event register flags
+ * these are catenated into a single 32-bit flag in the code
+ * for event notification broadcasts.
+ */
+#define AB3100_EVENTA1_ONSWA				(0x01<<16)
+#define AB3100_EVENTA1_ONSWB				(0x02<<16)
+#define AB3100_EVENTA1_ONSWC				(0x04<<16)
+#define AB3100_EVENTA1_DCIO				(0x08<<16)
+#define AB3100_EVENTA1_OVER_TEMP			(0x10<<16)
+#define AB3100_EVENTA1_SIM_OFF				(0x20<<16)
+#define AB3100_EVENTA1_VBUS				(0x40<<16)
+#define AB3100_EVENTA1_VSET_USB				(0x80<<16)
+
+#define AB3100_EVENTA2_READY_TX				(0x01<<8)
+#define AB3100_EVENTA2_READY_RX				(0x02<<8)
+#define AB3100_EVENTA2_OVERRUN_ERROR			(0x04<<8)
+#define AB3100_EVENTA2_FRAMING_ERROR			(0x08<<8)
+#define AB3100_EVENTA2_CHARG_OVERCURRENT		(0x10<<8)
+#define AB3100_EVENTA2_MIDR				(0x20<<8)
+#define AB3100_EVENTA2_BATTERY_REM			(0x40<<8)
+#define AB3100_EVENTA2_ALARM				(0x80<<8)
+
+#define AB3100_EVENTA3_ADC_TRIG5			(0x01)
+#define AB3100_EVENTA3_ADC_TRIG4			(0x02)
+#define AB3100_EVENTA3_ADC_TRIG3			(0x04)
+#define AB3100_EVENTA3_ADC_TRIG2			(0x08)
+#define AB3100_EVENTA3_ADC_TRIGVBAT			(0x10)
+#define AB3100_EVENTA3_ADC_TRIGVTX			(0x20)
+#define AB3100_EVENTA3_ADC_TRIG1			(0x40)
+#define AB3100_EVENTA3_ADC_TRIG0			(0x80)
+
+/* AB3100, STR register flags */
+#define AB3100_STR_ONSWA				(0x01)
+#define AB3100_STR_ONSWB				(0x02)
+#define AB3100_STR_ONSWC				(0x04)
+#define AB3100_STR_DCIO					(0x08)
+#define AB3100_STR_BOOT_MODE				(0x10)
+#define AB3100_STR_SIM_OFF				(0x20)
+#define AB3100_STR_BATT_REMOVAL				(0x40)
+#define AB3100_STR_VBUS					(0x80)
+
+/**
+ * struct ab3100
+ * @access_mutex: lock out concurrent accesses to the AB3100 registers
+ * @dev: pointer to the containing device
+ * @i2c_client: I2C client for this chip
+ * @testreg_client: secondary client for test registers
+ * @chip_name: name of this chip variant
+ * @chip_id: 8 bit chip ID for this chip variant
+ * @work: an event handling worker
+ * @event_subscribers: event subscribers are listed here
+ * @startup_events: a copy of the first reading of the event registers
+ * @startup_events_read: whether the first events have been read
+ *
+ * This struct is PRIVATE and devices using it should NOT
+ * access ANY fields. It is used as a token for calling the
+ * AB3100 functions.
+ */
+struct ab3100 {
+	struct mutex access_mutex;
+	struct device *dev;
+	struct i2c_client *i2c_client;
+	struct i2c_client *testreg_client;
+	char chip_name[32];
+	u8 chip_id;
+	struct work_struct work;
+	struct blocking_notifier_head event_subscribers;
+	u32 startup_events;
+	bool startup_events_read;
+};
+
+int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval);
+int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval);
+int ab3100_get_register_page(struct ab3100 *ab3100,
+			     u8 first_reg, u8 *regvals, u8 numregs);
+int ab3100_mask_and_set_register(struct ab3100 *ab3100,
+				 u8 reg, u8 andmask, u8 ormask);
+u8 ab3100_get_chip_type(struct ab3100 *ab3100);
+int ab3100_event_register(struct ab3100 *ab3100,
+			  struct notifier_block *nb);
+int ab3100_event_unregister(struct ab3100 *ab3100,
+			    struct notifier_block *nb);
+int ab3100_event_registers_startup_state_get(struct ab3100 *ab3100,
+					     u32 *fatevent);
+
+#endif
diff --git a/include/linux/mfd/asic3.h b/include/linux/mfd/asic3.h
index 322cd6deb9f..de3c4ad19af 100644
--- a/include/linux/mfd/asic3.h
+++ b/include/linux/mfd/asic3.h
@@ -30,6 +30,13 @@ struct asic3_platform_data {
 #define ASIC3_NUM_GPIOS		64
 #define ASIC3_NR_IRQS		ASIC3_NUM_GPIOS + 6
 
+#define ASIC3_IRQ_LED0		64
+#define ASIC3_IRQ_LED1		65
+#define ASIC3_IRQ_LED2		66
+#define ASIC3_IRQ_SPI		67
+#define ASIC3_IRQ_SMBUS		68
+#define ASIC3_IRQ_OWM		69
+
 #define ASIC3_TO_GPIO(gpio) (NR_BUILTIN_GPIO + (gpio))
 
 #define ASIC3_GPIO_BANK_A	0
@@ -227,8 +234,8 @@ struct asic3_platform_data {
 
 
 /* Basic control of the SD ASIC */
-#define ASIC3_SDHWCTRL_Base	0x0E00
-#define ASIC3_SDHWCTRL_SDConf    0x00
+#define ASIC3_SDHWCTRL_BASE     0x0E00
+#define ASIC3_SDHWCTRL_SDCONF     0x00
 
 #define ASIC3_SDHWCTRL_SUSPEND    (1 << 0)  /* 1=suspend all SD operations */
 #define ASIC3_SDHWCTRL_CLKSEL     (1 << 1)  /* 1=SDICK, 0=HCLK */
@@ -242,10 +249,10 @@ struct asic3_platform_data {
 /* SD card power supply ctrl 1=enable */
 #define ASIC3_SDHWCTRL_SDPWR      (1 << 6)
 
-#define ASIC3_EXTCF_Base		0x1100
+#define ASIC3_EXTCF_BASE        0x1100
 
-#define ASIC3_EXTCF_Select         0x00
-#define ASIC3_EXTCF_Reset          0x04
+#define ASIC3_EXTCF_SELECT        0x00
+#define ASIC3_EXTCF_RESET         0x04
 
 #define ASIC3_EXTCF_SMOD0	         (1 << 0)  /* slot number of mode 0 */
 #define ASIC3_EXTCF_SMOD1	         (1 << 1)  /* slot number of mode 1 */
@@ -279,222 +286,9 @@ struct asic3_platform_data {
  *  SDIO_CTRL         Control registers for SDIO operations
  *
  *****************************************************************************/
-#define ASIC3_SD_CONFIG_Base            0x0400 /* Assumes 32 bit addressing */
-
-#define ASIC3_SD_CONFIG_Command           0x08   /* R/W: Command */
-
-/* [0:8] SD Control Register Base Address */
-#define ASIC3_SD_CONFIG_Addr0             0x20
-
-/* [9:31] SD Control Register Base Address */
-#define ASIC3_SD_CONFIG_Addr1             0x24
-
-/* R/O: interrupt assigned to pin */
-#define ASIC3_SD_CONFIG_IntPin            0x78
-
-/*
- * Set to 0x1f to clock SD controller, 0 otherwise.
- * At 0x82 - Gated Clock Ctrl
- */
-#define ASIC3_SD_CONFIG_ClkStop           0x80
-
-/* Control clock of SD controller */
-#define ASIC3_SD_CONFIG_ClockMode         0x84
-#define ASIC3_SD_CONFIG_SDHC_PinStatus    0x88   /* R/0: SD pins status */
-#define ASIC3_SD_CONFIG_SDHC_Power1       0x90   /* Power1 - manual pwr ctrl */
-
-/* auto power up after card inserted */
-#define ASIC3_SD_CONFIG_SDHC_Power2       0x92
-
-/* auto power down when card removed */
-#define ASIC3_SD_CONFIG_SDHC_Power3       0x94
-#define ASIC3_SD_CONFIG_SDHC_CardDetect   0x98
-#define ASIC3_SD_CONFIG_SDHC_Slot         0xA0   /* R/O: support slot number */
-#define ASIC3_SD_CONFIG_SDHC_ExtGateClk1  0x1E0  /* Not used */
-#define ASIC3_SD_CONFIG_SDHC_ExtGateClk2  0x1E2  /* Not used*/
-
-/* GPIO Output Reg. , at 0x1EA - GPIO Output Enable Reg. */
-#define ASIC3_SD_CONFIG_SDHC_GPIO_OutAndEnable  0x1E8
-#define ASIC3_SD_CONFIG_SDHC_GPIO_Status  0x1EC  /* GPIO Status Reg. */
-
-/* Bit 1: double buffer/single buffer */
-#define ASIC3_SD_CONFIG_SDHC_ExtGateClk3  0x1F0
-
-/* Memory access enable (set to 1 to access SD Controller) */
-#define SD_CONFIG_COMMAND_MAE                (1<<1)
-
-#define SD_CONFIG_CLK_ENABLE_ALL             0x1f
-
-#define SD_CONFIG_POWER1_PC_33V              0x0200    /* Set for 3.3 volts */
-#define SD_CONFIG_POWER1_PC_OFF              0x0000    /* Turn off power */
-
- /* two bits - number of cycles for card detection */
-#define SD_CONFIG_CARDDETECTMODE_CLK           ((x) & 0x3)
-
-
-#define ASIC3_SD_CTRL_Base            0x1000
-
-#define ASIC3_SD_CTRL_Cmd                  0x00
-#define ASIC3_SD_CTRL_Arg0                 0x08
-#define ASIC3_SD_CTRL_Arg1                 0x0C
-#define ASIC3_SD_CTRL_StopInternal         0x10
-#define ASIC3_SD_CTRL_TransferSectorCount  0x14
-#define ASIC3_SD_CTRL_Response0            0x18
-#define ASIC3_SD_CTRL_Response1            0x1C
-#define ASIC3_SD_CTRL_Response2            0x20
-#define ASIC3_SD_CTRL_Response3            0x24
-#define ASIC3_SD_CTRL_Response4            0x28
-#define ASIC3_SD_CTRL_Response5            0x2C
-#define ASIC3_SD_CTRL_Response6            0x30
-#define ASIC3_SD_CTRL_Response7            0x34
-#define ASIC3_SD_CTRL_CardStatus           0x38
-#define ASIC3_SD_CTRL_BufferCtrl           0x3C
-#define ASIC3_SD_CTRL_IntMaskCard          0x40
-#define ASIC3_SD_CTRL_IntMaskBuffer        0x44
-#define ASIC3_SD_CTRL_CardClockCtrl        0x48
-#define ASIC3_SD_CTRL_MemCardXferDataLen   0x4C
-#define ASIC3_SD_CTRL_MemCardOptionSetup   0x50
-#define ASIC3_SD_CTRL_ErrorStatus0         0x58
-#define ASIC3_SD_CTRL_ErrorStatus1         0x5C
-#define ASIC3_SD_CTRL_DataPort             0x60
-#define ASIC3_SD_CTRL_TransactionCtrl      0x68
-#define ASIC3_SD_CTRL_SoftwareReset        0x1C0
-
-#define SD_CTRL_SOFTWARE_RESET_CLEAR            (1<<0)
-
-#define SD_CTRL_TRANSACTIONCONTROL_SET          (1<<8)
-
-#define SD_CTRL_CARDCLOCKCONTROL_FOR_SD_CARD    (1<<15)
-#define SD_CTRL_CARDCLOCKCONTROL_ENABLE_CLOCK   (1<<8)
-#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_512    (1<<7)
-#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_256    (1<<6)
-#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_128    (1<<5)
-#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_64     (1<<4)
-#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_32     (1<<3)
-#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_16     (1<<2)
-#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_8      (1<<1)
-#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_4      (1<<0)
-#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_2      (0<<0)
-
-#define MEM_CARD_OPTION_REQUIRED                   0x000e
-#define MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(x)   (((x) & 0x0f) << 4)
-#define MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT      (1<<14)
-#define MEM_CARD_OPTION_DATA_XFR_WIDTH_1           (1<<15)
-#define MEM_CARD_OPTION_DATA_XFR_WIDTH_4           0
-
-#define SD_CTRL_COMMAND_INDEX(x)                   ((x) & 0x3f)
-#define SD_CTRL_COMMAND_TYPE_CMD                   (0 << 6)
-#define SD_CTRL_COMMAND_TYPE_ACMD                  (1 << 6)
-#define SD_CTRL_COMMAND_TYPE_AUTHENTICATION        (2 << 6)
-#define SD_CTRL_COMMAND_RESPONSE_TYPE_NORMAL       (0 << 8)
-#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1       (4 << 8)
-#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1B      (5 << 8)
-#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R2       (6 << 8)
-#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R3       (7 << 8)
-#define SD_CTRL_COMMAND_DATA_PRESENT               (1 << 11)
-#define SD_CTRL_COMMAND_TRANSFER_READ              (1 << 12)
-#define SD_CTRL_COMMAND_TRANSFER_WRITE             (0 << 12)
-#define SD_CTRL_COMMAND_MULTI_BLOCK                (1 << 13)
-#define SD_CTRL_COMMAND_SECURITY_CMD               (1 << 14)
-
-#define SD_CTRL_STOP_INTERNAL_ISSSUE_CMD12         (1 << 0)
-#define SD_CTRL_STOP_INTERNAL_AUTO_ISSUE_CMD12     (1 << 8)
-
-#define SD_CTRL_CARDSTATUS_RESPONSE_END            (1 << 0)
-#define SD_CTRL_CARDSTATUS_RW_END                  (1 << 2)
-#define SD_CTRL_CARDSTATUS_CARD_REMOVED_0          (1 << 3)
-#define SD_CTRL_CARDSTATUS_CARD_INSERTED_0         (1 << 4)
-#define SD_CTRL_CARDSTATUS_SIGNAL_STATE_PRESENT_0  (1 << 5)
-#define SD_CTRL_CARDSTATUS_WRITE_PROTECT           (1 << 7)
-#define SD_CTRL_CARDSTATUS_CARD_REMOVED_3          (1 << 8)
-#define SD_CTRL_CARDSTATUS_CARD_INSERTED_3         (1 << 9)
-#define SD_CTRL_CARDSTATUS_SIGNAL_STATE_PRESENT_3  (1 << 10)
-
-#define SD_CTRL_BUFFERSTATUS_CMD_INDEX_ERROR       (1 << 0)
-#define SD_CTRL_BUFFERSTATUS_CRC_ERROR             (1 << 1)
-#define SD_CTRL_BUFFERSTATUS_STOP_BIT_END_ERROR    (1 << 2)
-#define SD_CTRL_BUFFERSTATUS_DATA_TIMEOUT          (1 << 3)
-#define SD_CTRL_BUFFERSTATUS_BUFFER_OVERFLOW       (1 << 4)
-#define SD_CTRL_BUFFERSTATUS_BUFFER_UNDERFLOW      (1 << 5)
-#define SD_CTRL_BUFFERSTATUS_CMD_TIMEOUT           (1 << 6)
-#define SD_CTRL_BUFFERSTATUS_UNK7                  (1 << 7)
-#define SD_CTRL_BUFFERSTATUS_BUFFER_READ_ENABLE    (1 << 8)
-#define SD_CTRL_BUFFERSTATUS_BUFFER_WRITE_ENABLE   (1 << 9)
-#define SD_CTRL_BUFFERSTATUS_ILLEGAL_FUNCTION      (1 << 13)
-#define SD_CTRL_BUFFERSTATUS_CMD_BUSY              (1 << 14)
-#define SD_CTRL_BUFFERSTATUS_ILLEGAL_ACCESS        (1 << 15)
-
-#define SD_CTRL_INTMASKCARD_RESPONSE_END           (1 << 0)
-#define SD_CTRL_INTMASKCARD_RW_END                 (1 << 2)
-#define SD_CTRL_INTMASKCARD_CARD_REMOVED_0         (1 << 3)
-#define SD_CTRL_INTMASKCARD_CARD_INSERTED_0        (1 << 4)
-#define SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_0 (1 << 5)
-#define SD_CTRL_INTMASKCARD_UNK6                   (1 << 6)
-#define SD_CTRL_INTMASKCARD_WRITE_PROTECT          (1 << 7)
-#define SD_CTRL_INTMASKCARD_CARD_REMOVED_3         (1 << 8)
-#define SD_CTRL_INTMASKCARD_CARD_INSERTED_3        (1 << 9)
-#define SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_3 (1 << 10)
-
-#define SD_CTRL_INTMASKBUFFER_CMD_INDEX_ERROR      (1 << 0)
-#define SD_CTRL_INTMASKBUFFER_CRC_ERROR            (1 << 1)
-#define SD_CTRL_INTMASKBUFFER_STOP_BIT_END_ERROR   (1 << 2)
-#define SD_CTRL_INTMASKBUFFER_DATA_TIMEOUT         (1 << 3)
-#define SD_CTRL_INTMASKBUFFER_BUFFER_OVERFLOW      (1 << 4)
-#define SD_CTRL_INTMASKBUFFER_BUFFER_UNDERFLOW     (1 << 5)
-#define SD_CTRL_INTMASKBUFFER_CMD_TIMEOUT          (1 << 6)
-#define SD_CTRL_INTMASKBUFFER_UNK7                 (1 << 7)
-#define SD_CTRL_INTMASKBUFFER_BUFFER_READ_ENABLE   (1 << 8)
-#define SD_CTRL_INTMASKBUFFER_BUFFER_WRITE_ENABLE  (1 << 9)
-#define SD_CTRL_INTMASKBUFFER_ILLEGAL_FUNCTION     (1 << 13)
-#define SD_CTRL_INTMASKBUFFER_CMD_BUSY             (1 << 14)
-#define SD_CTRL_INTMASKBUFFER_ILLEGAL_ACCESS       (1 << 15)
-
-#define SD_CTRL_DETAIL0_RESPONSE_CMD_ERROR                   (1 << 0)
-#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_RESPONSE_NON_CMD12 (1 << 2)
-#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_RESPONSE_CMD12     (1 << 3)
-#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_READ_DATA          (1 << 4)
-#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_WRITE_CRC_STATUS   (1 << 5)
-#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_RESPONSE_NON_CMD12     (1 << 8)
-#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_RESPONSE_CMD12         (1 << 9)
-#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_READ_DATA              (1 << 10)
-#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_WRITE_CMD              (1 << 11)
-
-#define SD_CTRL_DETAIL1_NO_CMD_RESPONSE                      (1 << 0)
-#define SD_CTRL_DETAIL1_TIMEOUT_READ_DATA                    (1 << 4)
-#define SD_CTRL_DETAIL1_TIMEOUT_CRS_STATUS                   (1 << 5)
-#define SD_CTRL_DETAIL1_TIMEOUT_CRC_BUSY                     (1 << 6)
-
-#define ASIC3_SDIO_CTRL_Base          0x1200
-
-#define ASIC3_SDIO_CTRL_Cmd                  0x00
-#define ASIC3_SDIO_CTRL_CardPortSel          0x04
-#define ASIC3_SDIO_CTRL_Arg0                 0x08
-#define ASIC3_SDIO_CTRL_Arg1                 0x0C
-#define ASIC3_SDIO_CTRL_TransferBlockCount   0x14
-#define ASIC3_SDIO_CTRL_Response0            0x18
-#define ASIC3_SDIO_CTRL_Response1            0x1C
-#define ASIC3_SDIO_CTRL_Response2            0x20
-#define ASIC3_SDIO_CTRL_Response3            0x24
-#define ASIC3_SDIO_CTRL_Response4            0x28
-#define ASIC3_SDIO_CTRL_Response5            0x2C
-#define ASIC3_SDIO_CTRL_Response6            0x30
-#define ASIC3_SDIO_CTRL_Response7            0x34
-#define ASIC3_SDIO_CTRL_CardStatus           0x38
-#define ASIC3_SDIO_CTRL_BufferCtrl           0x3C
-#define ASIC3_SDIO_CTRL_IntMaskCard          0x40
-#define ASIC3_SDIO_CTRL_IntMaskBuffer        0x44
-#define ASIC3_SDIO_CTRL_CardXferDataLen      0x4C
-#define ASIC3_SDIO_CTRL_CardOptionSetup      0x50
-#define ASIC3_SDIO_CTRL_ErrorStatus0         0x54
-#define ASIC3_SDIO_CTRL_ErrorStatus1         0x58
-#define ASIC3_SDIO_CTRL_DataPort             0x60
-#define ASIC3_SDIO_CTRL_TransactionCtrl      0x68
-#define ASIC3_SDIO_CTRL_CardIntCtrl          0x6C
-#define ASIC3_SDIO_CTRL_ClocknWaitCtrl       0x70
-#define ASIC3_SDIO_CTRL_HostInformation      0x74
-#define ASIC3_SDIO_CTRL_ErrorCtrl            0x78
-#define ASIC3_SDIO_CTRL_LEDCtrl              0x7C
-#define ASIC3_SDIO_CTRL_SoftwareReset        0x1C0
+#define ASIC3_SD_CONFIG_BASE	0x0400 /* Assumes 32 bit addressing */
+#define ASIC3_SD_CTRL_BASE	0x1000
+#define ASIC3_SDIO_CTRL_BASE	0x1200
 
 #define ASIC3_MAP_SIZE_32BIT	0x2000
 #define ASIC3_MAP_SIZE_16BIT	0x1000
diff --git a/include/linux/mfd/ezx-pcap.h b/include/linux/mfd/ezx-pcap.h
new file mode 100644
index 00000000000..c12c3c0932b
--- /dev/null
+++ b/include/linux/mfd/ezx-pcap.h
@@ -0,0 +1,256 @@
+/*
+ * Copyright 2009 Daniel Ribeiro <drwyrm@gmail.com>
+ *
+ * For further information, please see http://wiki.openezx.org/PCAP2
+ */
+
+#ifndef EZX_PCAP_H
+#define EZX_PCAP_H
+
+struct pcap_subdev {
+	int id;
+	const char *name;
+	void *platform_data;
+};
+
+struct pcap_platform_data {
+	unsigned int irq_base;
+	unsigned int config;
+	void (*init) (void *);	/* board specific init */
+	int num_subdevs;
+	struct pcap_subdev *subdevs;
+};
+
+struct pcap_chip;
+
+int ezx_pcap_write(struct pcap_chip *, u8, u32);
+int ezx_pcap_read(struct pcap_chip *, u8, u32 *);
+int pcap_to_irq(struct pcap_chip *, int);
+int pcap_adc_async(struct pcap_chip *, u8, u32, u8[], void *, void *);
+int pcap_adc_sync(struct pcap_chip *, u8, u32, u8[], u16[]);
+
+#define PCAP_SECOND_PORT	1
+#define PCAP_CS_AH		2
+
+#define PCAP_REGISTER_WRITE_OP_BIT	0x80000000
+#define PCAP_REGISTER_READ_OP_BIT	0x00000000
+
+#define PCAP_REGISTER_VALUE_MASK	0x01ffffff
+#define PCAP_REGISTER_ADDRESS_MASK	0x7c000000
+#define PCAP_REGISTER_ADDRESS_SHIFT	26
+#define PCAP_REGISTER_NUMBER		32
+#define PCAP_CLEAR_INTERRUPT_REGISTER	0x01ffffff
+#define PCAP_MASK_ALL_INTERRUPT		0x01ffffff
+
+/* registers acessible by both pcap ports */
+#define PCAP_REG_ISR		0x0	/* Interrupt Status */
+#define PCAP_REG_MSR		0x1	/* Interrupt Mask */
+#define PCAP_REG_PSTAT		0x2	/* Processor Status */
+#define PCAP_REG_VREG2		0x6	/* Regulator Bank 2 Control */
+#define PCAP_REG_AUXVREG	0x7	/* Auxiliary Regulator Control */
+#define PCAP_REG_BATT		0x8	/* Battery Control */
+#define PCAP_REG_ADC		0x9	/* AD Control */
+#define PCAP_REG_ADR		0xa	/* AD Result */
+#define PCAP_REG_CODEC		0xb	/* Audio Codec Control */
+#define PCAP_REG_RX_AMPS	0xc	/* RX Audio Amplifiers Control */
+#define PCAP_REG_ST_DAC		0xd	/* Stereo DAC Control */
+#define PCAP_REG_BUSCTRL	0x14	/* Connectivity Control */
+#define PCAP_REG_PERIPH		0x15	/* Peripheral Control */
+#define PCAP_REG_LOWPWR		0x18	/* Regulator Low Power Control */
+#define PCAP_REG_TX_AMPS	0x1a	/* TX Audio Amplifiers Control */
+#define PCAP_REG_GP		0x1b	/* General Purpose */
+#define PCAP_REG_TEST1		0x1c
+#define PCAP_REG_TEST2		0x1d
+#define PCAP_REG_VENDOR_TEST1	0x1e
+#define PCAP_REG_VENDOR_TEST2	0x1f
+
+/* registers acessible by pcap port 1 only (a1200, e2 & e6) */
+#define PCAP_REG_INT_SEL	0x3	/* Interrupt Select */
+#define PCAP_REG_SWCTRL		0x4	/* Switching Regulator Control */
+#define PCAP_REG_VREG1		0x5	/* Regulator Bank 1 Control */
+#define PCAP_REG_RTC_TOD	0xe	/* RTC Time of Day */
+#define PCAP_REG_RTC_TODA	0xf	/* RTC Time of Day Alarm */
+#define PCAP_REG_RTC_DAY	0x10	/* RTC Day */
+#define PCAP_REG_RTC_DAYA	0x11	/* RTC Day Alarm */
+#define PCAP_REG_MTRTMR		0x12	/* AD Monitor Timer */
+#define PCAP_REG_PWR		0x13	/* Power Control */
+#define PCAP_REG_AUXVREG_MASK	0x16	/* Auxiliary Regulator Mask */
+#define PCAP_REG_VENDOR_REV	0x17
+#define PCAP_REG_PERIPH_MASK	0x19	/* Peripheral Mask */
+
+/* PCAP2 Interrupts */
+#define PCAP_NIRQS		23
+#define PCAP_IRQ_ADCDONE	0	/* ADC done port 1 */
+#define PCAP_IRQ_TS		1	/* Touch Screen */
+#define PCAP_IRQ_1HZ		2	/* 1HZ timer */
+#define PCAP_IRQ_WH		3	/* ADC above high limit */
+#define PCAP_IRQ_WL		4	/* ADC below low limit */
+#define PCAP_IRQ_TODA		5	/* Time of day alarm */
+#define PCAP_IRQ_USB4V		6	/* USB above 4V */
+#define PCAP_IRQ_ONOFF		7	/* On/Off button */
+#define PCAP_IRQ_ONOFF2		8	/* On/Off button 2 */
+#define PCAP_IRQ_USB1V		9	/* USB above 1V */
+#define PCAP_IRQ_MOBPORT	10
+#define PCAP_IRQ_MIC		11	/* Mic attach/HS button */
+#define PCAP_IRQ_HS		12	/* Headset attach */
+#define PCAP_IRQ_ST		13
+#define PCAP_IRQ_PC		14	/* Power Cut */
+#define PCAP_IRQ_WARM		15
+#define PCAP_IRQ_EOL		16	/* Battery End Of Life */
+#define PCAP_IRQ_CLK		17
+#define PCAP_IRQ_SYSRST		18	/* System Reset */
+#define PCAP_IRQ_DUMMY		19
+#define PCAP_IRQ_ADCDONE2	20	/* ADC done port 2 */
+#define PCAP_IRQ_SOFTRESET	21
+#define PCAP_IRQ_MNEXB		22
+
+/* voltage regulators */
+#define V1		0
+#define V2		1
+#define V3		2
+#define V4		3
+#define V5		4
+#define V6		5
+#define V7		6
+#define V8		7
+#define V9		8
+#define V10		9
+#define VAUX1		10
+#define VAUX2		11
+#define VAUX3		12
+#define VAUX4		13
+#define VSIM		14
+#define VSIM2		15
+#define VVIB		16
+#define SW1		17
+#define SW2		18
+#define SW3		19
+#define SW1S		20
+#define SW2S		21
+
+#define PCAP_BATT_DAC_MASK		0x000000ff
+#define PCAP_BATT_DAC_SHIFT		0
+#define PCAP_BATT_B_FDBK		(1 << 8)
+#define PCAP_BATT_EXT_ISENSE		(1 << 9)
+#define PCAP_BATT_V_COIN_MASK		0x00003c00
+#define PCAP_BATT_V_COIN_SHIFT		10
+#define PCAP_BATT_I_COIN		(1 << 14)
+#define PCAP_BATT_COIN_CH_EN		(1 << 15)
+#define PCAP_BATT_EOL_SEL_MASK		0x000e0000
+#define PCAP_BATT_EOL_SEL_SHIFT		17
+#define PCAP_BATT_EOL_CMP_EN		(1 << 20)
+#define PCAP_BATT_BATT_DET_EN		(1 << 21)
+#define PCAP_BATT_THERMBIAS_CTRL	(1 << 22)
+
+#define PCAP_ADC_ADEN			(1 << 0)
+#define PCAP_ADC_RAND			(1 << 1)
+#define PCAP_ADC_AD_SEL1		(1 << 2)
+#define PCAP_ADC_AD_SEL2		(1 << 3)
+#define PCAP_ADC_ADA1_MASK		0x00000070
+#define PCAP_ADC_ADA1_SHIFT		4
+#define PCAP_ADC_ADA2_MASK		0x00000380
+#define PCAP_ADC_ADA2_SHIFT		7
+#define PCAP_ADC_ATO_MASK		0x00003c00
+#define PCAP_ADC_ATO_SHIFT		10
+#define PCAP_ADC_ATOX			(1 << 14)
+#define PCAP_ADC_MTR1			(1 << 15)
+#define PCAP_ADC_MTR2			(1 << 16)
+#define PCAP_ADC_TS_M_MASK		0x000e0000
+#define PCAP_ADC_TS_M_SHIFT		17
+#define PCAP_ADC_TS_REF_LOWPWR		(1 << 20)
+#define PCAP_ADC_TS_REFENB		(1 << 21)
+#define PCAP_ADC_BATT_I_POLARITY	(1 << 22)
+#define PCAP_ADC_BATT_I_ADC		(1 << 23)
+
+#define PCAP_ADC_BANK_0			0
+#define PCAP_ADC_BANK_1			1
+/* ADC bank 0 */
+#define PCAP_ADC_CH_COIN		0
+#define PCAP_ADC_CH_BATT		1
+#define PCAP_ADC_CH_BPLUS		2
+#define PCAP_ADC_CH_MOBPORTB		3
+#define PCAP_ADC_CH_TEMPERATURE		4
+#define PCAP_ADC_CH_CHARGER_ID		5
+#define PCAP_ADC_CH_AD6			6
+/* ADC bank 1 */
+#define PCAP_ADC_CH_AD7			0
+#define PCAP_ADC_CH_AD8			1
+#define PCAP_ADC_CH_AD9			2
+#define PCAP_ADC_CH_TS_X1		3
+#define PCAP_ADC_CH_TS_X2		4
+#define PCAP_ADC_CH_TS_Y1		5
+#define PCAP_ADC_CH_TS_Y2		6
+
+#define PCAP_ADC_T_NOW			0
+#define PCAP_ADC_T_IN_BURST		1
+#define PCAP_ADC_T_OUT_BURST		2
+
+#define PCAP_ADC_ATO_IN_BURST		6
+#define PCAP_ADC_ATO_OUT_BURST		0
+
+#define PCAP_ADC_TS_M_XY		1
+#define PCAP_ADC_TS_M_PRESSURE		2
+#define PCAP_ADC_TS_M_PLATE_X		3
+#define PCAP_ADC_TS_M_PLATE_Y		4
+#define PCAP_ADC_TS_M_STANDBY		5
+#define PCAP_ADC_TS_M_NONTS		6
+
+#define PCAP_ADR_ADD1_MASK		0x000003ff
+#define PCAP_ADR_ADD1_SHIFT		0
+#define PCAP_ADR_ADD2_MASK		0x000ffc00
+#define PCAP_ADR_ADD2_SHIFT		10
+#define PCAP_ADR_ADINC1			(1 << 20)
+#define PCAP_ADR_ADINC2			(1 << 21)
+#define PCAP_ADR_ASC			(1 << 22)
+#define PCAP_ADR_ONESHOT		(1 << 23)
+
+#define PCAP_BUSCTRL_FSENB		(1 << 0)
+#define PCAP_BUSCTRL_USB_SUSPEND	(1 << 1)
+#define PCAP_BUSCTRL_USB_PU		(1 << 2)
+#define PCAP_BUSCTRL_USB_PD		(1 << 3)
+#define PCAP_BUSCTRL_VUSB_EN		(1 << 4)
+#define PCAP_BUSCTRL_USB_PS		(1 << 5)
+#define PCAP_BUSCTRL_VUSB_MSTR_EN	(1 << 6)
+#define PCAP_BUSCTRL_VBUS_PD_ENB	(1 << 7)
+#define PCAP_BUSCTRL_CURRLIM		(1 << 8)
+#define PCAP_BUSCTRL_RS232ENB		(1 << 9)
+#define PCAP_BUSCTRL_RS232_DIR		(1 << 10)
+#define PCAP_BUSCTRL_SE0_CONN		(1 << 11)
+#define PCAP_BUSCTRL_USB_PDM		(1 << 12)
+#define PCAP_BUSCTRL_BUS_PRI_ADJ	(1 << 24)
+
+/* leds */
+#define PCAP_LED0		0
+#define PCAP_LED1		1
+#define PCAP_BL0		2
+#define PCAP_BL1		3
+#define PCAP_VIB		4
+#define PCAP_LED_3MA		0
+#define PCAP_LED_4MA		1
+#define PCAP_LED_5MA		2
+#define PCAP_LED_9MA		3
+#define PCAP_LED_GPIO_VAL_MASK	0x00ffffff
+#define PCAP_LED_GPIO_EN	0x01000000
+#define PCAP_LED_GPIO_INVERT	0x02000000
+#define PCAP_LED_T_MASK		0xf
+#define PCAP_LED_C_MASK		0x3
+#define PCAP_BL_MASK		0x1f
+#define PCAP_BL0_SHIFT		0
+#define PCAP_LED0_EN		(1 << 5)
+#define PCAP_LED1_EN		(1 << 6)
+#define PCAP_LED0_T_SHIFT	7
+#define PCAP_LED1_T_SHIFT	11
+#define PCAP_LED0_C_SHIFT	15
+#define PCAP_LED1_C_SHIFT	17
+#define PCAP_BL1_SHIFT		20
+#define PCAP_VIB_MASK		0x3
+#define PCAP_VIB_SHIFT		20
+#define PCAP_VIB_EN		(1 << 19)
+
+/* RTC */
+#define PCAP_RTC_DAY_MASK	0x3fff
+#define PCAP_RTC_TOD_MASK	0xffff
+#define PCAP_RTC_PC_MASK	0x7
+#define SEC_PER_DAY		86400
+
+#endif
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index c377118884e..6b9c5d06690 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -22,7 +22,7 @@
  * data for the MMC controller
  */
 struct tmio_mmc_data {
-	unsigned int		hclk;
+	const unsigned int		hclk;
 };
 
 /*
diff --git a/include/linux/mm.h b/include/linux/mm.h
index d88d6fc530a..d006e93d5c9 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -810,11 +810,11 @@ extern int vmtruncate_range(struct inode * inode, loff_t offset, loff_t end);
 
 #ifdef CONFIG_MMU
 extern int handle_mm_fault(struct mm_struct *mm, struct vm_area_struct *vma,
-			unsigned long address, int write_access);
+			unsigned long address, unsigned int flags);
 #else
 static inline int handle_mm_fault(struct mm_struct *mm,
 			struct vm_area_struct *vma, unsigned long address,
-			int write_access)
+			unsigned int flags)
 {
 	/* should never happen if there's no MMU */
 	BUG();
@@ -854,6 +854,12 @@ extern int mprotect_fixup(struct vm_area_struct *vma,
 			  unsigned long end, unsigned long newflags);
 
 /*
+ * doesn't attempt to fault and will return short.
+ */
+int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
+			  struct page **pages);
+
+/*
  * A callback you can register to apply pressure to ageable caches.
  *
  * 'shrink' is passed a count 'nr_to_scan' and a 'gfpmask'.  It should
diff --git a/include/linux/mnt_namespace.h b/include/linux/mnt_namespace.h
index 3a059298cc1..3beb2592b03 100644
--- a/include/linux/mnt_namespace.h
+++ b/include/linux/mnt_namespace.h
@@ -24,16 +24,10 @@ struct proc_mounts {
 
 struct fs_struct;
 
+extern struct mnt_namespace *create_mnt_ns(struct vfsmount *mnt);
 extern struct mnt_namespace *copy_mnt_ns(unsigned long, struct mnt_namespace *,
 		struct fs_struct *);
-extern void __put_mnt_ns(struct mnt_namespace *ns);
-
-static inline void put_mnt_ns(struct mnt_namespace *ns)
-{
-	if (atomic_dec_and_lock(&ns->count, &vfsmount_lock))
-		/* releases vfsmount_lock */
-		__put_mnt_ns(ns);
-}
+extern void put_mnt_ns(struct mnt_namespace *ns);
 
 static inline void exit_mnt_ns(struct task_struct *p)
 {
diff --git a/include/linux/module.h b/include/linux/module.h
index 505f20dcc1c..098bdb7bfac 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -363,6 +363,12 @@ struct module
 	local_t ref;
 #endif
 #endif
+
+#ifdef CONFIG_CONSTRUCTORS
+	/* Constructor functions. */
+	ctor_fn_t *ctors;
+	unsigned int num_ctors;
+#endif
 };
 #ifndef MODULE_ARCH_INIT
 #define MODULE_ARCH_INIT {}
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 7efb9be3466..4030ebada49 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -563,6 +563,7 @@ extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len,
  * @options:		Option flags, e.g. 16bit buswidth
  * @ecclayout:		ecc layout info structure
  * @part_probe_types:	NULL-terminated array of probe types
+ * @set_parts:		platform specific function to set partitions
  * @priv:		hardware controller specific settings
  */
 struct platform_nand_chip {
@@ -574,26 +575,41 @@ struct platform_nand_chip {
 	int			chip_delay;
 	unsigned int		options;
 	const char		**part_probe_types;
+	void			(*set_parts)(uint64_t size,
+					struct platform_nand_chip *chip);
 	void			*priv;
 };
 
+/* Keep gcc happy */
+struct platform_device;
+
 /**
  * struct platform_nand_ctrl - controller level device structure
+ * @probe:		platform specific function to probe/setup hardware
+ * @remove:		platform specific function to remove/teardown hardware
  * @hwcontrol:		platform specific hardware control structure
  * @dev_ready:		platform specific function to read ready/busy pin
  * @select_chip:	platform specific chip select function
  * @cmd_ctrl:		platform specific function for controlling
  *			ALE/CLE/nCE. Also used to write command and address
+ * @write_buf:		platform specific function for write buffer
+ * @read_buf:		platform specific function for read buffer
  * @priv:		private data to transport driver specific settings
  *
  * All fields are optional and depend on the hardware driver requirements
  */
 struct platform_nand_ctrl {
+	int		(*probe)(struct platform_device *pdev);
+	void		(*remove)(struct platform_device *pdev);
 	void		(*hwcontrol)(struct mtd_info *mtd, int cmd);
 	int		(*dev_ready)(struct mtd_info *mtd);
 	void		(*select_chip)(struct mtd_info *mtd, int chip);
 	void		(*cmd_ctrl)(struct mtd_info *mtd, int dat,
 				    unsigned int ctrl);
+	void		(*write_buf)(struct mtd_info *mtd,
+				    const uint8_t *buf, int len);
+	void		(*read_buf)(struct mtd_info *mtd,
+				    uint8_t *buf, int len);
 	void		*priv;
 };
 
diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
index 9aa2a9149b5..8ed87337438 100644
--- a/include/linux/mtd/onenand.h
+++ b/include/linux/mtd/onenand.h
@@ -17,6 +17,7 @@
 #include <linux/mtd/onenand_regs.h>
 #include <linux/mtd/bbm.h>
 
+#define MAX_DIES		2
 #define MAX_BUFFERRAM		2
 
 /* Scan and identify a OneNAND device */
@@ -51,7 +52,12 @@ struct onenand_bufferram {
 /**
  * struct onenand_chip - OneNAND Private Flash Chip Data
  * @base:		[BOARDSPECIFIC] address to access OneNAND
+ * @dies:		[INTERN][FLEX-ONENAND] number of dies on chip
+ * @boundary:		[INTERN][FLEX-ONENAND] Boundary of the dies
+ * @diesize:		[INTERN][FLEX-ONENAND] Size of the dies
  * @chipsize:		[INTERN] the size of one chip for multichip arrays
+ *			FIXME For Flex-OneNAND, chipsize holds maximum possible
+ *			device size ie when all blocks are considered MLC
  * @device_id:		[INTERN] device ID
  * @density_mask:	chip density, used for DDP devices
  * @verstion_id:	[INTERN] version ID
@@ -68,6 +74,8 @@ struct onenand_bufferram {
  * @command:		[REPLACEABLE] hardware specific function for writing
  *			commands to the chip
  * @wait:		[REPLACEABLE] hardware specific function for wait on ready
+ * @bbt_wait:		[REPLACEABLE] hardware specific function for bbt wait on ready
+ * @unlock_all:		[REPLACEABLE] hardware specific function for unlock all
  * @read_bufferram:	[REPLACEABLE] hardware specific function for BufferRAM Area
  * @write_bufferram:	[REPLACEABLE] hardware specific function for BufferRAM Area
  * @read_word:		[REPLACEABLE] hardware specific function for read
@@ -92,9 +100,13 @@ struct onenand_bufferram {
  */
 struct onenand_chip {
 	void __iomem		*base;
+	unsigned		dies;
+	unsigned		boundary[MAX_DIES];
+	loff_t			diesize[MAX_DIES];
 	unsigned int		chipsize;
 	unsigned int		device_id;
 	unsigned int		version_id;
+	unsigned int		technology;
 	unsigned int		density_mask;
 	unsigned int		options;
 
@@ -108,6 +120,8 @@ struct onenand_chip {
 
 	int (*command)(struct mtd_info *mtd, int cmd, loff_t address, size_t len);
 	int (*wait)(struct mtd_info *mtd, int state);
+	int (*bbt_wait)(struct mtd_info *mtd, int state);
+	void (*unlock_all)(struct mtd_info *mtd);
 	int (*read_bufferram)(struct mtd_info *mtd, int area,
 			unsigned char *buffer, int offset, size_t count);
 	int (*write_bufferram)(struct mtd_info *mtd, int area,
@@ -145,6 +159,8 @@ struct onenand_chip {
 #define ONENAND_SET_BUFFERRAM0(this)		(this->bufferram_index = 0)
 #define ONENAND_SET_BUFFERRAM1(this)		(this->bufferram_index = 1)
 
+#define FLEXONENAND(this)						\
+	(this->device_id & DEVICE_IS_FLEXONENAND)
 #define ONENAND_GET_SYS_CFG1(this)					\
 	(this->read_word(this->base + ONENAND_REG_SYS_CFG1))
 #define ONENAND_SET_SYS_CFG1(v, this)					\
@@ -153,6 +169,9 @@ struct onenand_chip {
 #define ONENAND_IS_DDP(this)						\
 	(this->device_id & ONENAND_DEVICE_IS_DDP)
 
+#define ONENAND_IS_MLC(this)						\
+	(this->technology & ONENAND_TECHNOLOGY_IS_MLC)
+
 #ifdef CONFIG_MTD_ONENAND_2X_PROGRAM
 #define ONENAND_IS_2PLANE(this)						\
 	(this->options & ONENAND_HAS_2PLANE)
@@ -169,6 +188,7 @@ struct onenand_chip {
 #define ONENAND_HAS_CONT_LOCK		(0x0001)
 #define ONENAND_HAS_UNLOCK_ALL		(0x0002)
 #define ONENAND_HAS_2PLANE		(0x0004)
+#define ONENAND_SKIP_UNLOCK_CHECK	(0x0100)
 #define ONENAND_PAGEBUF_ALLOC		(0x1000)
 #define ONENAND_OOBBUF_ALLOC		(0x2000)
 
@@ -176,6 +196,7 @@ struct onenand_chip {
  * OneNAND Flash Manufacturer ID Codes
  */
 #define ONENAND_MFR_SAMSUNG	0xec
+#define ONENAND_MFR_NUMONYX	0x20
 
 /**
  * struct onenand_manufacturers - NAND Flash Manufacturer ID Structure
@@ -189,5 +210,8 @@ struct onenand_manufacturers {
 
 int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
 			 struct mtd_oob_ops *ops);
+unsigned onenand_block(struct onenand_chip *this, loff_t addr);
+loff_t onenand_addr(struct onenand_chip *this, int block);
+int flexonenand_region(struct mtd_info *mtd, loff_t addr);
 
 #endif	/* __LINUX_MTD_ONENAND_H */
diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h
index 0c6bbe28f38..86a6bbef646 100644
--- a/include/linux/mtd/onenand_regs.h
+++ b/include/linux/mtd/onenand_regs.h
@@ -67,6 +67,9 @@
 /*
  * Device ID Register F001h (R)
  */
+#define DEVICE_IS_FLEXONENAND		(1 << 9)
+#define FLEXONENAND_PI_MASK		(0x3ff)
+#define FLEXONENAND_PI_UNLOCK_SHIFT	(14)
 #define ONENAND_DEVICE_DENSITY_MASK	(0xf)
 #define ONENAND_DEVICE_DENSITY_SHIFT	(4)
 #define ONENAND_DEVICE_IS_DDP		(1 << 3)
@@ -84,6 +87,11 @@
 #define ONENAND_VERSION_PROCESS_SHIFT	(8)
 
 /*
+ * Technology Register F006h (R)
+ */
+#define ONENAND_TECHNOLOGY_IS_MLC	(1 << 0)
+
+/*
  * Start Address 1 F100h (R/W) & Start Address 2 F101h (R/W)
  */
 #define ONENAND_DDP_SHIFT		(15)
@@ -93,7 +101,8 @@
 /*
  * Start Address 8 F107h (R/W)
  */
-#define ONENAND_FPA_MASK		(0x3f)
+/* Note: It's actually 0x3f in case of SLC */
+#define ONENAND_FPA_MASK		(0x7f)
 #define ONENAND_FPA_SHIFT		(2)
 #define ONENAND_FSA_MASK		(0x03)
 
@@ -105,7 +114,8 @@
 #define ONENAND_BSA_BOOTRAM		(0 << 2)
 #define ONENAND_BSA_DATARAM0		(2 << 2)
 #define ONENAND_BSA_DATARAM1		(3 << 2)
-#define ONENAND_BSC_MASK		(0x03)
+/* Note: It's actually 0x03 in case of SLC */
+#define ONENAND_BSC_MASK		(0x07)
 
 /*
  * Command Register F220h (R/W)
@@ -124,9 +134,13 @@
 #define ONENAND_CMD_RESET		(0xF0)
 #define ONENAND_CMD_OTP_ACCESS		(0x65)
 #define ONENAND_CMD_READID		(0x90)
+#define FLEXONENAND_CMD_PI_UPDATE	(0x05)
+#define FLEXONENAND_CMD_PI_ACCESS	(0x66)
+#define FLEXONENAND_CMD_RECOVER_LSB	(0x05)
 
 /* NOTE: Those are not *REAL* commands */
 #define ONENAND_CMD_BUFFERRAM		(0x1978)
+#define FLEXONENAND_CMD_READ_PI		(0x1985)
 
 /*
  * System Configuration 1 Register F221h (R, R/W)
@@ -192,10 +206,12 @@
 #define ONENAND_ECC_1BIT_ALL		(0x5555)
 #define ONENAND_ECC_2BIT		(1 << 1)
 #define ONENAND_ECC_2BIT_ALL		(0xAAAA)
+#define FLEXONENAND_UNCORRECTABLE_ERROR	(0x1010)
 
 /*
  * One-Time Programmable (OTP)
  */
+#define FLEXONENAND_OTP_LOCK_OFFSET		(2048)
 #define ONENAND_OTP_LOCK_OFFSET		(14)
 
 #endif	/* __ONENAND_REG_H */
diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h
index 7535a74083b..af6dcb992bc 100644
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -40,7 +40,6 @@ struct mtd_partition {
 	uint64_t offset;		/* offset within the master MTD space */
 	uint32_t mask_flags;		/* master MTD flags to mask out for this partition */
 	struct nand_ecclayout *ecclayout;	/* out of band layout for this partition (NAND only)*/
-	struct mtd_info **mtdp;		/* pointer to store the MTD object */
 };
 
 #define MTDPART_OFS_NXTBLK	(-2)
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 9ea8d6dfe54..d4a4d986779 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -224,6 +224,11 @@ struct netdev_hw_addr {
 	struct rcu_head		rcu_head;
 };
 
+struct netdev_hw_addr_list {
+	struct list_head	list;
+	int			count;
+};
+
 struct hh_cache
 {
 	struct hh_cache *hh_next;	/* Next entry			     */
@@ -776,9 +781,8 @@ struct net_device
 	unsigned char		addr_len;	/* hardware address length	*/
 	unsigned short          dev_id;		/* for shared network cards */
 
-	struct list_head	uc_list;	/* Secondary unicast mac
-						   addresses */
-	int			uc_count;	/* Number of installed ucasts	*/
+	struct netdev_hw_addr_list	uc;	/* Secondary unicast
+						   mac addresses */
 	int			uc_promisc;
 	spinlock_t		addr_list_lock;
 	struct dev_addr_list	*mc_list;	/* Multicast mac addresses	*/
@@ -810,7 +814,8 @@ struct net_device
 						   because most packets are
 						   unicast) */
 
-	struct list_head	dev_addr_list; /* list of device hw addresses */
+	struct netdev_hw_addr_list	dev_addrs; /* list of device
+						      hw addresses */
 
 	unsigned char		broadcast[MAX_ADDR_LEN];	/* hw bcast add	*/
 
@@ -1806,11 +1811,11 @@ static inline void netif_addr_unlock_bh(struct net_device *dev)
 }
 
 /*
- * dev_addr_list walker. Should be used only for read access. Call with
+ * dev_addrs walker. Should be used only for read access. Call with
  * rcu_read_lock held.
  */
 #define for_each_dev_addr(dev, ha) \
-		list_for_each_entry_rcu(ha, &dev->dev_addr_list, list)
+		list_for_each_entry_rcu(ha, &dev->dev_addrs.list, list)
 
 /* These functions live elsewhere (drivers/net/net_init.c, but related) */
 
diff --git a/include/linux/nfs.h b/include/linux/nfs.h
index 214d499718f..f387919bbc5 100644
--- a/include/linux/nfs.h
+++ b/include/linux/nfs.h
@@ -25,8 +25,9 @@
 #define NFSMODE_SOCK	0140000
 #define NFSMODE_FIFO	0010000
 
-#define NFS_MNT_PROGRAM	100005
-#define NFS_MNT_PORT	627
+#define NFS_MNT_PROGRAM		100005
+#define NFS_MNT_VERSION		1
+#define NFS_MNT3_VERSION	3
 
 /*
  * NFS stats. The good thing with these values is that NFSv3 errors are
diff --git a/include/linux/nfs2.h b/include/linux/nfs2.h
index 0ed9517138f..fde24b30cc9 100644
--- a/include/linux/nfs2.h
+++ b/include/linux/nfs2.h
@@ -64,11 +64,4 @@ struct nfs2_fh {
 #define NFSPROC_READDIR		16
 #define NFSPROC_STATFS		17
 
-#define NFS_MNT_PROGRAM		100005
-#define NFS_MNT_VERSION		1
-#define MNTPROC_NULL		0
-#define MNTPROC_MNT		1
-#define MNTPROC_UMNT		3
-#define MNTPROC_UMNTALL		4
-
 #endif /* _LINUX_NFS2_H */
diff --git a/include/linux/nfs3.h b/include/linux/nfs3.h
index 539f3b550ea..ac33806ec7f 100644
--- a/include/linux/nfs3.h
+++ b/include/linux/nfs3.h
@@ -88,12 +88,7 @@ struct nfs3_fh {
 #define NFS3PROC_PATHCONF	20
 #define NFS3PROC_COMMIT		21
 
-#define NFS_MNT3_PROGRAM	100005
 #define NFS_MNT3_VERSION	3
-#define MOUNTPROC3_NULL		0
-#define MOUNTPROC3_MNT		1
-#define MOUNTPROC3_UMNT		3
-#define MOUNTPROC3_UMNTALL	4
  
 
 #if defined(__KERNEL__)
diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h
index e3f0cbcbd0d..bd2eba53066 100644
--- a/include/linux/nfs4.h
+++ b/include/linux/nfs4.h
@@ -21,6 +21,7 @@
 #define NFS4_FHSIZE		128
 #define NFS4_MAXPATHLEN		PATH_MAX
 #define NFS4_MAXNAMLEN		NAME_MAX
+#define NFS4_OPAQUE_LIMIT	1024
 #define NFS4_MAX_SESSIONID_LEN	16
 
 #define NFS4_ACCESS_READ        0x0001
@@ -130,6 +131,16 @@
 
 #define NFS4_MAX_UINT64	(~(u64)0)
 
+/* An NFS4 sessions server must support at least NFS4_MAX_OPS operations.
+ * If a compound requires more operations, adjust NFS4_MAX_OPS accordingly.
+ */
+#define NFS4_MAX_OPS   8
+
+/* Our NFS4 client back channel server only wants the cb_sequene and the
+ * actual operation per compound
+ */
+#define NFS4_MAX_BACK_CHANNEL_OPS 2
+
 enum nfs4_acl_whotype {
 	NFS4_ACL_WHO_NAMED = 0,
 	NFS4_ACL_WHO_OWNER,
@@ -462,6 +473,13 @@ enum lock_type4 {
 #define NFSPROC4_NULL 0
 #define NFSPROC4_COMPOUND 1
 #define NFS4_MINOR_VERSION 0
+
+#if defined(CONFIG_NFS_V4_1)
+#define NFS4_MAX_MINOR_VERSION 1
+#else
+#define NFS4_MAX_MINOR_VERSION 0
+#endif /* CONFIG_NFS_V4_1 */
+
 #define NFS4_DEBUG 1
 
 /* Index of predefined Linux client operations */
diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h
index 6ad75948cbf..19fe15d1204 100644
--- a/include/linux/nfs_fs_sb.h
+++ b/include/linux/nfs_fs_sb.h
@@ -4,11 +4,17 @@
 #include <linux/list.h>
 #include <linux/backing-dev.h>
 #include <linux/wait.h>
+#include <linux/nfs_xdr.h>
+#include <linux/sunrpc/xprt.h>
 
 #include <asm/atomic.h>
 
+struct nfs4_session;
 struct nfs_iostats;
 struct nlm_host;
+struct nfs4_sequence_args;
+struct nfs4_sequence_res;
+struct nfs_server;
 
 /*
  * The nfs_client identifies our client state to the server.
@@ -18,6 +24,7 @@ struct nfs_client {
 	int			cl_cons_state;	/* current construction state (-ve: init error) */
 #define NFS_CS_READY		0		/* ready to be used */
 #define NFS_CS_INITING		1		/* busy initialising */
+#define NFS_CS_SESSION_INITING	2		/* busy initialising  session */
 	unsigned long		cl_res_state;	/* NFS resources state */
 #define NFS_CS_CALLBACK		1		/* - callback started */
 #define NFS_CS_IDMAP		2		/* - idmap started */
@@ -32,6 +39,7 @@ struct nfs_client {
 	const struct nfs_rpc_ops *rpc_ops;	/* NFS protocol vector */
 	int			cl_proto;	/* Network transport protocol */
 
+	u32			cl_minorversion;/* NFSv4 minorversion */
 	struct rpc_cred		*cl_machine_cred;
 
 #ifdef CONFIG_NFS_V4
@@ -63,7 +71,22 @@ struct nfs_client {
 	 */
 	char			cl_ipaddr[48];
 	unsigned char		cl_id_uniquifier;
-#endif
+	int		     (* cl_call_sync)(struct nfs_server *server,
+					      struct rpc_message *msg,
+					      struct nfs4_sequence_args *args,
+					      struct nfs4_sequence_res *res,
+					      int cache_reply);
+#endif /* CONFIG_NFS_V4 */
+
+#ifdef CONFIG_NFS_V4_1
+	/* clientid returned from EXCHANGE_ID, used by session operations */
+	u64			cl_ex_clid;
+	/* The sequence id to use for the next CREATE_SESSION */
+	u32			cl_seqid;
+	/* The flags used for obtaining the clientid during EXCHANGE_ID */
+	u32			cl_exchange_flags;
+	struct nfs4_session	*cl_session; 	/* sharred session */
+#endif /* CONFIG_NFS_V4_1 */
 
 #ifdef CONFIG_NFS_FSCACHE
 	struct fscache_cookie	*fscache;	/* client index cache cookie */
@@ -145,4 +168,46 @@ struct nfs_server {
 #define NFS_CAP_ACLS		(1U << 3)
 #define NFS_CAP_ATOMIC_OPEN	(1U << 4)
 
+
+/* maximum number of slots to use */
+#define NFS4_MAX_SLOT_TABLE RPC_MAX_SLOT_TABLE
+
+#if defined(CONFIG_NFS_V4_1)
+
+/* Sessions */
+#define SLOT_TABLE_SZ (NFS4_MAX_SLOT_TABLE/(8*sizeof(long)))
+struct nfs4_slot_table {
+	struct nfs4_slot *slots;		/* seqid per slot */
+	unsigned long   used_slots[SLOT_TABLE_SZ]; /* used/unused bitmap */
+	spinlock_t	slot_tbl_lock;
+	struct rpc_wait_queue	slot_tbl_waitq;	/* allocators may wait here */
+	int		max_slots;		/* # slots in table */
+	int		highest_used_slotid;	/* sent to server on each SEQ.
+						 * op for dynamic resizing */
+};
+
+static inline int slot_idx(struct nfs4_slot_table *tbl, struct nfs4_slot *sp)
+{
+	return sp - tbl->slots;
+}
+
+/*
+ * Session related parameters
+ */
+struct nfs4_session {
+	struct nfs4_sessionid		sess_id;
+	u32				flags;
+	unsigned long			session_state;
+	u32				hash_alg;
+	u32				ssv_len;
+
+	/* The fore and back channel */
+	struct nfs4_channel_attrs	fc_attrs;
+	struct nfs4_slot_table		fc_slot_table;
+	struct nfs4_channel_attrs	bc_attrs;
+	struct nfs4_slot_table		bc_slot_table;
+	struct nfs_client		*clp;
+};
+
+#endif /* CONFIG_NFS_V4_1 */
 #endif
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index b89c34e40bc..62f63fb0c4c 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -145,6 +145,44 @@ struct nfs4_change_info {
 };
 
 struct nfs_seqid;
+
+/* nfs41 sessions channel attributes */
+struct nfs4_channel_attrs {
+	u32			headerpadsz;
+	u32			max_rqst_sz;
+	u32			max_resp_sz;
+	u32			max_resp_sz_cached;
+	u32			max_ops;
+	u32			max_reqs;
+};
+
+/* nfs41 sessions slot seqid */
+struct nfs4_slot {
+	u32		 	seq_nr;
+};
+
+struct nfs4_sequence_args {
+	struct nfs4_session	*sa_session;
+	u8			sa_slotid;
+	u8			sa_cache_this;
+};
+
+struct nfs4_sequence_res {
+	struct nfs4_session	*sr_session;
+	u8			sr_slotid;	/* slot used to send request */
+	unsigned long		sr_renewal_time;
+	int			sr_status;	/* sequence operation status */
+};
+
+struct nfs4_get_lease_time_args {
+	struct nfs4_sequence_args	la_seq_args;
+};
+
+struct nfs4_get_lease_time_res {
+	struct nfs_fsinfo	       *lr_fsinfo;
+	struct nfs4_sequence_res	lr_seq_res;
+};
+
 /*
  * Arguments to the open call.
  */
@@ -165,6 +203,7 @@ struct nfs_openargs {
 	const struct nfs_server *server;	 /* Needed for ID mapping */
 	const u32 *		bitmask;
 	__u32			claim;
+	struct nfs4_sequence_args	seq_args;
 };
 
 struct nfs_openres {
@@ -181,6 +220,7 @@ struct nfs_openres {
 	__u32			do_recall;
 	__u64			maxsize;
 	__u32			attrset[NFS4_BITMAP_SIZE];
+	struct nfs4_sequence_res	seq_res;
 };
 
 /*
@@ -206,6 +246,7 @@ struct nfs_closeargs {
 	struct nfs_seqid *	seqid;
 	fmode_t			fmode;
 	const u32 *		bitmask;
+	struct nfs4_sequence_args	seq_args;
 };
 
 struct nfs_closeres {
@@ -213,6 +254,7 @@ struct nfs_closeres {
 	struct nfs_fattr *	fattr;
 	struct nfs_seqid *	seqid;
 	const struct nfs_server *server;
+	struct nfs4_sequence_res	seq_res;
 };
 /*
  *  * Arguments to the lock,lockt, and locku call.
@@ -233,12 +275,14 @@ struct nfs_lock_args {
 	unsigned char		block : 1;
 	unsigned char		reclaim : 1;
 	unsigned char		new_lock_owner : 1;
+	struct nfs4_sequence_args	seq_args;
 };
 
 struct nfs_lock_res {
 	nfs4_stateid		stateid;
 	struct nfs_seqid *	lock_seqid;
 	struct nfs_seqid *	open_seqid;
+	struct nfs4_sequence_res	seq_res;
 };
 
 struct nfs_locku_args {
@@ -246,32 +290,38 @@ struct nfs_locku_args {
 	struct file_lock *	fl;
 	struct nfs_seqid *	seqid;
 	nfs4_stateid *		stateid;
+	struct nfs4_sequence_args	seq_args;
 };
 
 struct nfs_locku_res {
 	nfs4_stateid		stateid;
 	struct nfs_seqid *	seqid;
+	struct nfs4_sequence_res	seq_res;
 };
 
 struct nfs_lockt_args {
 	struct nfs_fh *		fh;
 	struct file_lock *	fl;
 	struct nfs_lowner	lock_owner;
+	struct nfs4_sequence_args	seq_args;
 };
 
 struct nfs_lockt_res {
 	struct file_lock *	denied; /* LOCK, LOCKT failed */
+	struct nfs4_sequence_res	seq_res;
 };
 
 struct nfs4_delegreturnargs {
 	const struct nfs_fh *fhandle;
 	const nfs4_stateid *stateid;
 	const u32 * bitmask;
+	struct nfs4_sequence_args	seq_args;
 };
 
 struct nfs4_delegreturnres {
 	struct nfs_fattr * fattr;
 	const struct nfs_server *server;
+	struct nfs4_sequence_res	seq_res;
 };
 
 /*
@@ -284,12 +334,14 @@ struct nfs_readargs {
 	__u32			count;
 	unsigned int		pgbase;
 	struct page **		pages;
+	struct nfs4_sequence_args	seq_args;
 };
 
 struct nfs_readres {
 	struct nfs_fattr *	fattr;
 	__u32			count;
 	int                     eof;
+	struct nfs4_sequence_res	seq_res;
 };
 
 /*
@@ -304,6 +356,7 @@ struct nfs_writeargs {
 	unsigned int		pgbase;
 	struct page **		pages;
 	const u32 *		bitmask;
+	struct nfs4_sequence_args	seq_args;
 };
 
 struct nfs_writeverf {
@@ -316,6 +369,7 @@ struct nfs_writeres {
 	struct nfs_writeverf *	verf;
 	__u32			count;
 	const struct nfs_server *server;
+	struct nfs4_sequence_res	seq_res;
 };
 
 /*
@@ -325,12 +379,14 @@ struct nfs_removeargs {
 	const struct nfs_fh	*fh;
 	struct qstr		name;
 	const u32 *		bitmask;
+	struct nfs4_sequence_args	seq_args;
 };
 
 struct nfs_removeres {
 	const struct nfs_server *server;
 	struct nfs4_change_info	cinfo;
 	struct nfs_fattr	dir_attr;
+	struct nfs4_sequence_res 	seq_res;
 };
 
 /*
@@ -383,6 +439,7 @@ struct nfs_setattrargs {
 	struct iattr *                  iap;
 	const struct nfs_server *	server; /* Needed for name mapping */
 	const u32 *			bitmask;
+	struct nfs4_sequence_args 	seq_args;
 };
 
 struct nfs_setaclargs {
@@ -390,6 +447,11 @@ struct nfs_setaclargs {
 	size_t				acl_len;
 	unsigned int			acl_pgbase;
 	struct page **			acl_pages;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs_setaclres {
+	struct nfs4_sequence_res	seq_res;
 };
 
 struct nfs_getaclargs {
@@ -397,11 +459,18 @@ struct nfs_getaclargs {
 	size_t				acl_len;
 	unsigned int			acl_pgbase;
 	struct page **			acl_pages;
+	struct nfs4_sequence_args 	seq_args;
+};
+
+struct nfs_getaclres {
+	size_t				acl_len;
+	struct nfs4_sequence_res	seq_res;
 };
 
 struct nfs_setattrres {
 	struct nfs_fattr *              fattr;
 	const struct nfs_server *	server;
+	struct nfs4_sequence_res	seq_res;
 };
 
 struct nfs_linkargs {
@@ -583,6 +652,7 @@ struct nfs4_accessargs {
 	const struct nfs_fh *		fh;
 	const u32 *			bitmask;
 	u32				access;
+	struct nfs4_sequence_args	seq_args;
 };
 
 struct nfs4_accessres {
@@ -590,6 +660,7 @@ struct nfs4_accessres {
 	struct nfs_fattr *		fattr;
 	u32				supported;
 	u32				access;
+	struct nfs4_sequence_res	seq_res;
 };
 
 struct nfs4_create_arg {
@@ -609,6 +680,7 @@ struct nfs4_create_arg {
 	const struct iattr *		attrs;
 	const struct nfs_fh *		dir_fh;
 	const u32 *			bitmask;
+	struct nfs4_sequence_args 	seq_args;
 };
 
 struct nfs4_create_res {
@@ -617,21 +689,30 @@ struct nfs4_create_res {
 	struct nfs_fattr *		fattr;
 	struct nfs4_change_info		dir_cinfo;
 	struct nfs_fattr *		dir_fattr;
+	struct nfs4_sequence_res	seq_res;
 };
 
 struct nfs4_fsinfo_arg {
 	const struct nfs_fh *		fh;
 	const u32 *			bitmask;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs4_fsinfo_res {
+	struct nfs_fsinfo	       *fsinfo;
+	struct nfs4_sequence_res	seq_res;
 };
 
 struct nfs4_getattr_arg {
 	const struct nfs_fh *		fh;
 	const u32 *			bitmask;
+	struct nfs4_sequence_args	seq_args;
 };
 
 struct nfs4_getattr_res {
 	const struct nfs_server *	server;
 	struct nfs_fattr *		fattr;
+	struct nfs4_sequence_res	seq_res;
 };
 
 struct nfs4_link_arg {
@@ -639,6 +720,7 @@ struct nfs4_link_arg {
 	const struct nfs_fh *		dir_fh;
 	const struct qstr *		name;
 	const u32 *			bitmask;
+	struct nfs4_sequence_args 	seq_args;
 };
 
 struct nfs4_link_res {
@@ -646,6 +728,7 @@ struct nfs4_link_res {
 	struct nfs_fattr *		fattr;
 	struct nfs4_change_info		cinfo;
 	struct nfs_fattr *		dir_attr;
+	struct nfs4_sequence_res	seq_res;
 };
 
 
@@ -653,21 +736,30 @@ struct nfs4_lookup_arg {
 	const struct nfs_fh *		dir_fh;
 	const struct qstr *		name;
 	const u32 *			bitmask;
+	struct nfs4_sequence_args	seq_args;
 };
 
 struct nfs4_lookup_res {
 	const struct nfs_server *	server;
 	struct nfs_fattr *		fattr;
 	struct nfs_fh *			fh;
+	struct nfs4_sequence_res	seq_res;
 };
 
 struct nfs4_lookup_root_arg {
 	const u32 *			bitmask;
+	struct nfs4_sequence_args	seq_args;
 };
 
 struct nfs4_pathconf_arg {
 	const struct nfs_fh *		fh;
 	const u32 *			bitmask;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs4_pathconf_res {
+	struct nfs_pathconf	       *pathconf;
+	struct nfs4_sequence_res	seq_res;
 };
 
 struct nfs4_readdir_arg {
@@ -678,11 +770,13 @@ struct nfs4_readdir_arg {
 	struct page **			pages;	/* zero-copy data */
 	unsigned int			pgbase;	/* zero-copy data */
 	const u32 *			bitmask;
+	struct nfs4_sequence_args	seq_args;
 };
 
 struct nfs4_readdir_res {
 	nfs4_verifier			verifier;
 	unsigned int			pgbase;
+	struct nfs4_sequence_res	seq_res;
 };
 
 struct nfs4_readlink {
@@ -690,6 +784,11 @@ struct nfs4_readlink {
 	unsigned int			pgbase;
 	unsigned int			pglen;   /* zero-copy data */
 	struct page **			pages;   /* zero-copy data */
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs4_readlink_res {
+	struct nfs4_sequence_res	seq_res;
 };
 
 struct nfs4_rename_arg {
@@ -698,6 +797,7 @@ struct nfs4_rename_arg {
 	const struct qstr *		old_name;
 	const struct qstr *		new_name;
 	const u32 *			bitmask;
+	struct nfs4_sequence_args	seq_args;
 };
 
 struct nfs4_rename_res {
@@ -706,6 +806,7 @@ struct nfs4_rename_res {
 	struct nfs_fattr *		old_fattr;
 	struct nfs4_change_info		new_cinfo;
 	struct nfs_fattr *		new_fattr;
+	struct nfs4_sequence_res	seq_res;
 };
 
 #define NFS4_SETCLIENTID_NAMELEN	(127)
@@ -724,6 +825,17 @@ struct nfs4_setclientid {
 struct nfs4_statfs_arg {
 	const struct nfs_fh *		fh;
 	const u32 *			bitmask;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs4_statfs_res {
+	struct nfs_fsstat	       *fsstat;
+	struct nfs4_sequence_res	seq_res;
+};
+
+struct nfs4_server_caps_arg {
+	struct nfs_fh		       *fhandle;
+	struct nfs4_sequence_args	seq_args;
 };
 
 struct nfs4_server_caps_res {
@@ -731,6 +843,7 @@ struct nfs4_server_caps_res {
 	u32				acl_bitmask;
 	u32				has_links;
 	u32				has_symlinks;
+	struct nfs4_sequence_res	seq_res;
 };
 
 struct nfs4_string {
@@ -765,10 +878,68 @@ struct nfs4_fs_locations_arg {
 	const struct qstr *name;
 	struct page *page;
 	const u32 *bitmask;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs4_fs_locations_res {
+	struct nfs4_fs_locations       *fs_locations;
+	struct nfs4_sequence_res	seq_res;
 };
 
 #endif /* CONFIG_NFS_V4 */
 
+struct nfstime4 {
+	u64	seconds;
+	u32	nseconds;
+};
+
+#ifdef CONFIG_NFS_V4_1
+struct nfs_impl_id4 {
+	u32		domain_len;
+	char		*domain;
+	u32		name_len;
+	char		*name;
+	struct nfstime4	date;
+};
+
+#define NFS4_EXCHANGE_ID_LEN	(48)
+struct nfs41_exchange_id_args {
+	struct nfs_client		*client;
+	nfs4_verifier			*verifier;
+	unsigned int 			id_len;
+	char 				id[NFS4_EXCHANGE_ID_LEN];
+	u32				flags;
+};
+
+struct server_owner {
+	uint64_t			minor_id;
+	uint32_t			major_id_sz;
+	char				major_id[NFS4_OPAQUE_LIMIT];
+};
+
+struct server_scope {
+	uint32_t			server_scope_sz;
+	char 				server_scope[NFS4_OPAQUE_LIMIT];
+};
+
+struct nfs41_exchange_id_res {
+	struct nfs_client		*client;
+	u32				flags;
+};
+
+struct nfs41_create_session_args {
+	struct nfs_client	       *client;
+	uint32_t			flags;
+	uint32_t			cb_program;
+	struct nfs4_channel_attrs	fc_attrs;	/* Fore Channel */
+	struct nfs4_channel_attrs	bc_attrs;	/* Back Channel */
+};
+
+struct nfs41_create_session_res {
+	struct nfs_client	       *client;
+};
+#endif /* CONFIG_NFS_V4_1 */
+
 struct nfs_page;
 
 #define NFS_PAGEVEC_SIZE	(8U)
diff --git a/include/linux/nfsd/cache.h b/include/linux/nfsd/cache.h
index 5bccaab8105..3a3f58934f5 100644
--- a/include/linux/nfsd/cache.h
+++ b/include/linux/nfsd/cache.h
@@ -14,8 +14,7 @@
 #include <linux/uio.h>
 
 /*
- * Representation of a reply cache entry. The first two members *must*
- * be hash_next and hash_prev.
+ * Representation of a reply cache entry.
  */
 struct svc_cacherep {
 	struct hlist_node	c_hash;
diff --git a/include/linux/nfsd/nfsfh.h b/include/linux/nfsd/nfsfh.h
index afa19016c4a..8f641c90845 100644
--- a/include/linux/nfsd/nfsfh.h
+++ b/include/linux/nfsd/nfsfh.h
@@ -151,9 +151,15 @@ typedef struct svc_fh {
 	__u64			fh_pre_size;	/* size before operation */
 	struct timespec		fh_pre_mtime;	/* mtime before oper */
 	struct timespec		fh_pre_ctime;	/* ctime before oper */
+	/*
+	 * pre-op nfsv4 change attr: note must check IS_I_VERSION(inode)
+	 *  to find out if it is valid.
+	 */
+	u64			fh_pre_change;
 
 	/* Post-op attributes saved in fh_unlock */
 	struct kstat		fh_post_attr;	/* full attrs after operation */
+	u64			fh_post_change; /* nfsv4 change; see above */
 #endif /* CONFIG_NFSD_V3 */
 
 } svc_fh;
@@ -298,6 +304,7 @@ fill_pre_wcc(struct svc_fh *fhp)
 		fhp->fh_pre_mtime = inode->i_mtime;
 		fhp->fh_pre_ctime = inode->i_ctime;
 		fhp->fh_pre_size  = inode->i_size;
+		fhp->fh_pre_change = inode->i_version;
 		fhp->fh_pre_saved = 1;
 	}
 }
diff --git a/include/linux/nfsd/state.h b/include/linux/nfsd/state.h
index 4d61c873fee..57ab2ed0845 100644
--- a/include/linux/nfsd/state.h
+++ b/include/linux/nfsd/state.h
@@ -41,7 +41,6 @@
 #include <linux/kref.h>
 #include <linux/sunrpc/clnt.h>
 
-#define NFS4_OPAQUE_LIMIT 1024
 typedef struct {
 	u32             cl_boot;
 	u32             cl_id;
@@ -61,15 +60,6 @@ typedef struct {
 #define si_stateownerid   si_opaque.so_stateownerid
 #define si_fileid         si_opaque.so_fileid
 
-
-struct nfs4_cb_recall {
-	u32			cbr_ident;
-	int			cbr_trunc;
-	stateid_t		cbr_stateid;
-	struct knfsd_fh		cbr_fh;
-	struct nfs4_delegation	*cbr_dp;
-};
-
 struct nfs4_delegation {
 	struct list_head	dl_perfile;
 	struct list_head	dl_perclnt;
@@ -81,22 +71,25 @@ struct nfs4_delegation {
 	struct file		*dl_vfs_file;
 	u32			dl_type;
 	time_t			dl_time;
-	struct nfs4_cb_recall	dl_recall;
+/* For recall: */
+	u32			dl_ident;
+	stateid_t		dl_stateid;
+	struct knfsd_fh		dl_fh;
+	int			dl_retries;
 };
 
-#define dl_stateid      dl_recall.cbr_stateid
-#define dl_fh           dl_recall.cbr_fh
-
 /* client delegation callback info */
-struct nfs4_callback {
+struct nfs4_cb_conn {
 	/* SETCLIENTID info */
 	u32                     cb_addr;
 	unsigned short          cb_port;
 	u32                     cb_prog;
-	u32                     cb_ident;
+	u32			cb_minorversion;
+	u32                     cb_ident;	/* minorversion 0 only */
 	/* RPC client info */
 	atomic_t		cb_set;     /* successful CB_NULL call */
 	struct rpc_clnt *       cb_client;
+	struct rpc_cred	*	cb_cred;
 };
 
 /* Maximum number of slots per session. 128 is useful for long haul TCP */
@@ -122,6 +115,17 @@ struct nfsd4_slot {
 	struct nfsd4_cache_entry	sl_cache_entry;
 };
 
+struct nfsd4_channel_attrs {
+	u32		headerpadsz;
+	u32		maxreq_sz;
+	u32		maxresp_sz;
+	u32		maxresp_cached;
+	u32		maxops;
+	u32		maxreqs;
+	u32		nr_rdma_attrs;
+	u32		rdma_attrs;
+};
+
 struct nfsd4_session {
 	struct kref		se_ref;
 	struct list_head	se_hash;	/* hash by sessionid */
@@ -129,11 +133,8 @@ struct nfsd4_session {
 	u32			se_flags;
 	struct nfs4_client	*se_client;	/* for expire_client */
 	struct nfs4_sessionid	se_sessionid;
-	u32			se_fmaxreq_sz;
-	u32			se_fmaxresp_sz;
-	u32			se_fmaxresp_cached;
-	u32			se_fmaxops;
-	u32			se_fnumslots;
+	struct nfsd4_channel_attrs se_fchannel;
+	struct nfsd4_channel_attrs se_bchannel;
 	struct nfsd4_slot	se_slots[];	/* forward channel slots */
 };
 
@@ -185,7 +186,7 @@ struct nfs4_client {
 	struct svc_cred		cl_cred; 	/* setclientid principal */
 	clientid_t		cl_clientid;	/* generated by server */
 	nfs4_verifier		cl_confirm;	/* generated by server */
-	struct nfs4_callback	cl_callback;    /* callback info */
+	struct nfs4_cb_conn	cl_cb_conn;     /* callback info */
 	atomic_t		cl_count;	/* ref count */
 	u32			cl_firststate;	/* recovery dir creation */
 
diff --git a/include/linux/nfsd/xdr4.h b/include/linux/nfsd/xdr4.h
index f80d6013fdc..2bacf753506 100644
--- a/include/linux/nfsd/xdr4.h
+++ b/include/linux/nfsd/xdr4.h
@@ -64,10 +64,13 @@ static inline bool nfsd4_has_session(struct nfsd4_compound_state *cs)
 
 struct nfsd4_change_info {
 	u32		atomic;
+	bool		change_supported;
 	u32		before_ctime_sec;
 	u32		before_ctime_nsec;
+	u64		before_change;
 	u32		after_ctime_sec;
 	u32		after_ctime_nsec;
+	u64		after_change;
 };
 
 struct nfsd4_access {
@@ -363,17 +366,6 @@ struct nfsd4_exchange_id {
 	int		spa_how;
 };
 
-struct nfsd4_channel_attrs {
-	u32		headerpadsz;
-	u32		maxreq_sz;
-	u32		maxresp_sz;
-	u32		maxresp_cached;
-	u32		maxops;
-	u32		maxreqs;
-	u32		nr_rdma_attrs;
-	u32		rdma_attrs;
-};
-
 struct nfsd4_create_session {
 	clientid_t		clientid;
 	struct nfs4_sessionid	sessionid;
@@ -503,10 +495,16 @@ set_change_info(struct nfsd4_change_info *cinfo, struct svc_fh *fhp)
 {
 	BUG_ON(!fhp->fh_pre_saved || !fhp->fh_post_saved);
 	cinfo->atomic = 1;
-	cinfo->before_ctime_sec = fhp->fh_pre_ctime.tv_sec;
-	cinfo->before_ctime_nsec = fhp->fh_pre_ctime.tv_nsec;
-	cinfo->after_ctime_sec = fhp->fh_post_attr.ctime.tv_sec;
-	cinfo->after_ctime_nsec = fhp->fh_post_attr.ctime.tv_nsec;
+	cinfo->change_supported = IS_I_VERSION(fhp->fh_dentry->d_inode);
+	if (cinfo->change_supported) {
+		cinfo->before_change = fhp->fh_pre_change;
+		cinfo->after_change = fhp->fh_post_change;
+	} else {
+		cinfo->before_ctime_sec = fhp->fh_pre_ctime.tv_sec;
+		cinfo->before_ctime_nsec = fhp->fh_pre_ctime.tv_nsec;
+		cinfo->after_ctime_sec = fhp->fh_post_attr.ctime.tv_sec;
+		cinfo->after_ctime_nsec = fhp->fh_post_attr.ctime.tv_nsec;
+	}
 }
 
 int nfs4svc_encode_voidres(struct svc_rqst *, __be32 *, void *);
diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
index 092e82e0048..93a7c08f869 100644
--- a/include/linux/pci-acpi.h
+++ b/include/linux/pci-acpi.h
@@ -15,7 +15,7 @@ static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
 {
 	struct pci_bus *pbus = pdev->bus;
 	/* Find a PCI root bus */
-	while (pbus->parent)
+	while (!pci_is_root_bus(pbus))
 		pbus = pbus->parent;
 	return acpi_get_pci_rootbridge_handle(pci_domain_nr(pbus),
 					      pbus->number);
@@ -23,7 +23,7 @@ static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
 
 static inline acpi_handle acpi_pci_get_bridge_handle(struct pci_bus *pbus)
 {
-	if (pbus->parent)
+	if (!pci_is_root_bus(pbus))
 		return DEVICE_ACPI_HANDLE(&(pbus->self->dev));
 	return acpi_get_pci_rootbridge_handle(pci_domain_nr(pbus),
 					      pbus->number);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 8e366bb0705..d304ddf412d 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -196,6 +196,7 @@ struct pci_cap_saved_state {
 struct pcie_link_state;
 struct pci_vpd;
 struct pci_sriov;
+struct pci_ats;
 
 /*
  * The pci_dev structure is used to describe PCI devices.
@@ -293,6 +294,7 @@ struct pci_dev {
 		struct pci_sriov *sriov;	/* SR-IOV capability related */
 		struct pci_dev *physfn;	/* the PF this VF is associated with */
 	};
+	struct pci_ats	*ats;	/* Address Translation Service */
 #endif
 };
 
@@ -607,8 +609,6 @@ extern void pci_sort_breadthfirst(void);
 struct pci_dev __deprecated *pci_find_device(unsigned int vendor,
 					     unsigned int device,
 					     struct pci_dev *from);
-struct pci_dev __deprecated *pci_find_slot(unsigned int bus,
-					   unsigned int devfn);
 #endif /* CONFIG_PCI_LEGACY */
 
 enum pci_lost_interrupt_reason {
@@ -647,6 +647,7 @@ int pci_bus_write_config_word(struct pci_bus *bus, unsigned int devfn,
 			      int where, u16 val);
 int pci_bus_write_config_dword(struct pci_bus *bus, unsigned int devfn,
 			       int where, u32 val);
+struct pci_ops *pci_bus_set_ops(struct pci_bus *bus, struct pci_ops *ops);
 
 static inline int pci_read_config_byte(struct pci_dev *dev, int where, u8 *val)
 {
@@ -711,8 +712,8 @@ int pcix_get_mmrbc(struct pci_dev *dev);
 int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc);
 int pcie_get_readrq(struct pci_dev *dev);
 int pcie_set_readrq(struct pci_dev *dev, int rq);
+int __pci_reset_function(struct pci_dev *dev);
 int pci_reset_function(struct pci_dev *dev);
-int pci_execute_reset_function(struct pci_dev *dev);
 void pci_update_resource(struct pci_dev *dev, int resno);
 int __must_check pci_assign_resource(struct pci_dev *dev, int i);
 int pci_select_bars(struct pci_dev *dev, unsigned long flags);
@@ -732,7 +733,7 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state);
 pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state);
 bool pci_pme_capable(struct pci_dev *dev, pci_power_t state);
 void pci_pme_active(struct pci_dev *dev, bool enable);
-int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable);
+int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable);
 int pci_wake_from_d3(struct pci_dev *dev, bool enable);
 pci_power_t pci_target_state(struct pci_dev *dev);
 int pci_prepare_to_sleep(struct pci_dev *dev);
@@ -798,7 +799,7 @@ const struct pci_device_id *pci_match_id(const struct pci_device_id *ids,
 int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max,
 		    int pass);
 
-void pci_walk_bus(struct pci_bus *top, void (*cb)(struct pci_dev *, void *),
+void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
 		  void *userdata);
 int pci_cfg_space_size_ext(struct pci_dev *dev);
 int pci_cfg_space_size(struct pci_dev *dev);
@@ -888,6 +889,17 @@ static inline int pcie_aspm_enabled(void)
 extern int pcie_aspm_enabled(void);
 #endif
 
+#ifndef CONFIG_PCIE_ECRC
+static inline void pcie_set_ecrc_checking(struct pci_dev *dev)
+{
+	return;
+}
+static inline void pcie_ecrc_get_policy(char *str) {};
+#else
+extern void pcie_set_ecrc_checking(struct pci_dev *dev);
+extern void pcie_ecrc_get_policy(char *str);
+#endif
+
 #define pci_enable_msi(pdev)	pci_enable_msi_block(pdev, 1)
 
 #ifdef CONFIG_HT_IRQ
@@ -944,12 +956,6 @@ static inline struct pci_dev *pci_find_device(unsigned int vendor,
 	return NULL;
 }
 
-static inline struct pci_dev *pci_find_slot(unsigned int bus,
-					    unsigned int devfn)
-{
-	return NULL;
-}
-
 static inline struct pci_dev *pci_get_device(unsigned int vendor,
 					     unsigned int device,
 					     struct pci_dev *from)
@@ -1105,6 +1111,10 @@ static inline struct pci_dev *pci_get_bus_and_slot(unsigned int bus,
 
 #include <asm/pci.h>
 
+#ifndef PCIBIOS_MAX_MEM_32
+#define PCIBIOS_MAX_MEM_32 (-1)
+#endif
+
 /* these helpers provide future and backwards compatibility
  * for accessing popular PCI BAR info */
 #define pci_resource_start(dev, bar)	((dev)->resource[(bar)].start)
@@ -1261,5 +1271,10 @@ static inline irqreturn_t pci_sriov_migration(struct pci_dev *dev)
 }
 #endif
 
+#if defined(CONFIG_HOTPLUG_PCI) || defined(CONFIG_HOTPLUG_PCI_MODULE)
+extern void pci_hp_create_module_link(struct pci_slot *pci_slot);
+extern void pci_hp_remove_module_link(struct pci_slot *pci_slot);
+#endif
+
 #endif /* __KERNEL__ */
 #endif /* LINUX_PCI_H */
diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h
index 20998746518..b3646cd7fd5 100644
--- a/include/linux/pci_hotplug.h
+++ b/include/linux/pci_hotplug.h
@@ -66,17 +66,10 @@ enum pcie_link_speed {
 	PCIE_LNK_SPEED_UNKNOWN	= 0xFF,
 };
 
-struct hotplug_slot;
-struct hotplug_slot_attribute {
-	struct attribute attr;
-	ssize_t (*show)(struct hotplug_slot *, char *);
-	ssize_t (*store)(struct hotplug_slot *, const char *, size_t);
-};
-#define to_hotplug_attr(n) container_of(n, struct hotplug_slot_attribute, attr);
-
 /**
  * struct hotplug_slot_ops -the callbacks that the hotplug pci core can use
  * @owner: The module owner of this structure
+ * @mod_name: The module name (KBUILD_MODNAME) of this structure
  * @enable_slot: Called when the user wants to enable a specific pci slot
  * @disable_slot: Called when the user wants to disable a specific pci slot
  * @set_attention_status: Called to set the specific slot's attention LED to
@@ -109,6 +102,7 @@ struct hotplug_slot_attribute {
  */
 struct hotplug_slot_ops {
 	struct module *owner;
+	const char *mod_name;
 	int (*enable_slot)		(struct hotplug_slot *slot);
 	int (*disable_slot)		(struct hotplug_slot *slot);
 	int (*set_attention_status)	(struct hotplug_slot *slot, u8 value);
@@ -167,12 +161,21 @@ static inline const char *hotplug_slot_name(const struct hotplug_slot *slot)
 	return pci_slot_name(slot->pci_slot);
 }
 
-extern int pci_hp_register(struct hotplug_slot *, struct pci_bus *, int nr,
-			   const char *name);
+extern int __pci_hp_register(struct hotplug_slot *slot, struct pci_bus *pbus,
+			     int nr, const char *name,
+			     struct module *owner, const char *mod_name);
 extern int pci_hp_deregister(struct hotplug_slot *slot);
 extern int __must_check pci_hp_change_slot_info	(struct hotplug_slot *slot,
 						 struct hotplug_slot_info *info);
 
+static inline int pci_hp_register(struct hotplug_slot *slot,
+				  struct pci_bus *pbus,
+				  int devnr, const char *name)
+{
+	return __pci_hp_register(slot, pbus, devnr, name,
+				 THIS_MODULE, KBUILD_MODNAME);
+}
+
 /* PCI Setting Record (Type 0) */
 struct hpp_type0 {
 	u32 revision;
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index 616bf8b3c8b..fcaee42c7ac 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -295,8 +295,9 @@
 #define PCI_MSI_ADDRESS_LO	4	/* Lower 32 bits */
 #define PCI_MSI_ADDRESS_HI	8	/* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */
 #define PCI_MSI_DATA_32		8	/* 16 bits of data for 32-bit devices */
+#define PCI_MSI_MASK_32		12	/* Mask bits register for 32-bit devices */
 #define PCI_MSI_DATA_64		12	/* 16 bits of data for 64-bit devices */
-#define PCI_MSI_MASK_BIT	16	/* Mask bits register */
+#define PCI_MSI_MASK_64		16	/* Mask bits register for 64-bit devices */
 
 /* MSI-X registers (these are at offset PCI_MSIX_FLAGS) */
 #define PCI_MSIX_FLAGS		2
@@ -304,7 +305,6 @@
 #define  PCI_MSIX_FLAGS_ENABLE	(1 << 15)
 #define  PCI_MSIX_FLAGS_MASKALL	(1 << 14)
 #define PCI_MSIX_FLAGS_BIRMASK	(7 << 0)
-#define PCI_MSIX_FLAGS_BITMASK	(1 << 0)
 
 /* CompactPCI Hotswap Register */
 
@@ -502,6 +502,7 @@
 #define PCI_EXT_CAP_ID_DSN	3
 #define PCI_EXT_CAP_ID_PWR	4
 #define PCI_EXT_CAP_ID_ARI	14
+#define PCI_EXT_CAP_ID_ATS	15
 #define PCI_EXT_CAP_ID_SRIOV	16
 
 /* Advanced Error Reporting */
@@ -620,6 +621,15 @@
 #define  PCI_ARI_CTRL_ACS	0x0002	/* ACS Function Groups Enable */
 #define  PCI_ARI_CTRL_FG(x)	(((x) >> 4) & 7) /* Function Group */
 
+/* Address Translation Service */
+#define PCI_ATS_CAP		0x04	/* ATS Capability Register */
+#define  PCI_ATS_CAP_QDEP(x)	((x) & 0x1f)	/* Invalidate Queue Depth */
+#define  PCI_ATS_MAX_QDEP	32	/* Max Invalidate Queue Depth */
+#define PCI_ATS_CTRL		0x06	/* ATS Control Register */
+#define  PCI_ATS_CTRL_ENABLE	0x8000	/* ATS Enable */
+#define  PCI_ATS_CTRL_STU(x)	((x) & 0x1f)	/* Smallest Translation Unit */
+#define  PCI_ATS_MIN_STU	12	/* shift of minimum STU block */
+
 /* Single Root I/O Virtualization */
 #define PCI_SRIOV_CAP		0x04	/* SR-IOV Capabilities */
 #define  PCI_SRIOV_CAP_VFM	0x01	/* VF Migration Capable */
diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h
index 1b3118a1023..89698d8aba5 100644
--- a/include/linux/perf_counter.h
+++ b/include/linux/perf_counter.h
@@ -236,10 +236,16 @@ struct perf_counter_mmap_page {
 	/*
 	 * Control data for the mmap() data buffer.
 	 *
-	 * User-space reading this value should issue an rmb(), on SMP capable
-	 * platforms, after reading this value -- see perf_counter_wakeup().
+	 * User-space reading the @data_head value should issue an rmb(), on
+	 * SMP capable platforms, after reading this value -- see
+	 * perf_counter_wakeup().
+	 *
+	 * When the mapping is PROT_WRITE the @data_tail value should be
+	 * written by userspace to reflect the last read data. In this case
+	 * the kernel will not over-write unread data.
 	 */
 	__u64   data_head;		/* head in the data section */
+	__u64	data_tail;		/* user-space written tail */
 };
 
 #define PERF_EVENT_MISC_CPUMODE_MASK		(3 << 0)
@@ -275,6 +281,15 @@ enum perf_event_type {
 
 	/*
 	 * struct {
+	 * 	struct perf_event_header	header;
+	 * 	u64				id;
+	 * 	u64				lost;
+	 * };
+	 */
+	PERF_EVENT_LOST			= 2,
+
+	/*
+	 * struct {
 	 *	struct perf_event_header	header;
 	 *
 	 *	u32				pid, tid;
@@ -313,30 +328,39 @@ enum perf_event_type {
 
 	/*
 	 * When header.misc & PERF_EVENT_MISC_OVERFLOW the event_type field
-	 * will be PERF_RECORD_*
+	 * will be PERF_SAMPLE_*
 	 *
 	 * struct {
 	 *	struct perf_event_header	header;
 	 *
-	 *	{ u64			ip;	  } && PERF_RECORD_IP
-	 *	{ u32			pid, tid; } && PERF_RECORD_TID
-	 *	{ u64			time;     } && PERF_RECORD_TIME
-	 *	{ u64			addr;     } && PERF_RECORD_ADDR
-	 *	{ u64			config;   } && PERF_RECORD_CONFIG
-	 *	{ u32			cpu, res; } && PERF_RECORD_CPU
+	 *	{ u64			ip;	  } && PERF_SAMPLE_IP
+	 *	{ u32			pid, tid; } && PERF_SAMPLE_TID
+	 *	{ u64			time;     } && PERF_SAMPLE_TIME
+	 *	{ u64			addr;     } && PERF_SAMPLE_ADDR
+	 *	{ u64			config;   } && PERF_SAMPLE_CONFIG
+	 *	{ u32			cpu, res; } && PERF_SAMPLE_CPU
 	 *
 	 *	{ u64			nr;
-	 *	  { u64 id, val; }	cnt[nr];  } && PERF_RECORD_GROUP
+	 *	  { u64 id, val; }	cnt[nr];  } && PERF_SAMPLE_GROUP
 	 *
-	 *	{ u16			nr,
-	 *				hv,
-	 *				kernel,
-	 *				user;
-	 *	  u64			ips[nr];  } && PERF_RECORD_CALLCHAIN
+	 *	{ u64			nr,
+	 *	  u64			ips[nr];  } && PERF_SAMPLE_CALLCHAIN
 	 * };
 	 */
 };
 
+enum perf_callchain_context {
+	PERF_CONTEXT_HV			= (__u64)-32,
+	PERF_CONTEXT_KERNEL		= (__u64)-128,
+	PERF_CONTEXT_USER		= (__u64)-512,
+
+	PERF_CONTEXT_GUEST		= (__u64)-2048,
+	PERF_CONTEXT_GUEST_KERNEL	= (__u64)-2176,
+	PERF_CONTEXT_GUEST_USER		= (__u64)-2560,
+
+	PERF_CONTEXT_MAX		= (__u64)-4095,
+};
+
 #ifdef __KERNEL__
 /*
  * Kernel-internal data types and definitions:
@@ -356,6 +380,13 @@ enum perf_event_type {
 #include <linux/pid_namespace.h>
 #include <asm/atomic.h>
 
+#define PERF_MAX_STACK_DEPTH		255
+
+struct perf_callchain_entry {
+	__u64				nr;
+	__u64				ip[PERF_MAX_STACK_DEPTH];
+};
+
 struct task_struct;
 
 /**
@@ -414,6 +445,7 @@ struct file;
 struct perf_mmap_data {
 	struct rcu_head			rcu_head;
 	int				nr_pages;	/* nr of data pages  */
+	int				writable;	/* are we writable   */
 	int				nr_locked;	/* nr pages mlocked  */
 
 	atomic_t			poll;		/* POLL_ for wakeups */
@@ -423,8 +455,8 @@ struct perf_mmap_data {
 	atomic_long_t			done_head;	/* completed head    */
 
 	atomic_t			lock;		/* concurrent writes */
-
 	atomic_t			wakeup;		/* needs a wakeup    */
+	atomic_t			lost;		/* nr records lost   */
 
 	struct perf_counter_mmap_page   *user_page;
 	void				*data_pages[0];
@@ -604,6 +636,7 @@ extern void perf_counter_task_tick(struct task_struct *task, int cpu);
 extern int perf_counter_init_task(struct task_struct *child);
 extern void perf_counter_exit_task(struct task_struct *child);
 extern void perf_counter_free_task(struct task_struct *task);
+extern void set_perf_counter_pending(void);
 extern void perf_counter_do_pending(void);
 extern void perf_counter_print_debug(void);
 extern void __perf_disable(void);
@@ -649,18 +682,6 @@ static inline void perf_counter_mmap(struct vm_area_struct *vma)
 extern void perf_counter_comm(struct task_struct *tsk);
 extern void perf_counter_fork(struct task_struct *tsk);
 
-extern void perf_counter_task_migration(struct task_struct *task, int cpu);
-
-#define MAX_STACK_DEPTH			255
-
-struct perf_callchain_entry {
-	u16				nr;
-	u16				hv;
-	u16				kernel;
-	u16				user;
-	u64				ip[MAX_STACK_DEPTH];
-};
-
 extern struct perf_callchain_entry *perf_callchain(struct pt_regs *regs);
 
 extern int sysctl_perf_counter_paranoid;
@@ -701,8 +722,6 @@ static inline void perf_counter_mmap(struct vm_area_struct *vma)	{ }
 static inline void perf_counter_comm(struct task_struct *tsk)		{ }
 static inline void perf_counter_fork(struct task_struct *tsk)		{ }
 static inline void perf_counter_init(void)				{ }
-static inline void perf_counter_task_migration(struct task_struct *task,
-					       int cpu)			{ }
 #endif
 
 #endif /* __KERNEL__ */
diff --git a/include/linux/pps.h b/include/linux/pps.h
new file mode 100644
index 00000000000..cfe5c7214ec
--- /dev/null
+++ b/include/linux/pps.h
@@ -0,0 +1,122 @@
+/*
+ * PPS API header
+ *
+ * Copyright (C) 2005-2009   Rodolfo Giometti <giometti@linux.it>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#ifndef _PPS_H_
+#define _PPS_H_
+
+#define PPS_VERSION		"5.3.6"
+#define PPS_MAX_SOURCES		16		/* should be enough... */
+
+/* Implementation note: the logical states ``assert'' and ``clear''
+ * are implemented in terms of the chip register, i.e. ``assert''
+ * means the bit is set.  */
+
+/*
+ * 3.2 New data structures
+ */
+
+#define PPS_API_VERS_1		1
+#define PPS_API_VERS		PPS_API_VERS_1	/* we use API version 1 */
+#define PPS_MAX_NAME_LEN	32
+
+/* 32-bit vs. 64-bit compatibility.
+ *
+ * 0n i386, the alignment of a uint64_t is only 4 bytes, while on most other
+ * architectures it's 8 bytes. On i386, there will be no padding between the
+ * two consecutive 'struct pps_ktime' members of struct pps_kinfo and struct
+ * pps_kparams. But on most platforms there will be padding to ensure correct
+ * alignment.
+ *
+ * The simple fix is probably to add an explicit padding.
+ *					 		[David Woodhouse]
+ */
+struct pps_ktime {
+	__s64 sec;
+	__s32 nsec;
+	__u32 flags;
+};
+#define PPS_TIME_INVALID	(1<<0)	/* used to specify timeout==NULL */
+
+struct pps_kinfo {
+	__u32 assert_sequence;		/* seq. num. of assert event */
+	__u32 clear_sequence; 		/* seq. num. of clear event */
+	struct pps_ktime assert_tu;	/* time of assert event */
+	struct pps_ktime clear_tu;	/* time of clear event */
+	int current_mode;		/* current mode bits */
+};
+
+struct pps_kparams {
+	int api_version;		/* API version # */
+	int mode;			/* mode bits */
+	struct pps_ktime assert_off_tu;	/* offset compensation for assert */
+	struct pps_ktime clear_off_tu;	/* offset compensation for clear */
+};
+
+/*
+ * 3.3 Mode bit definitions
+ */
+
+/* Device/implementation parameters */
+#define PPS_CAPTUREASSERT	0x01	/* capture assert events */
+#define PPS_CAPTURECLEAR	0x02	/* capture clear events */
+#define PPS_CAPTUREBOTH		0x03	/* capture assert and clear events */
+
+#define PPS_OFFSETASSERT	0x10	/* apply compensation for assert ev. */
+#define PPS_OFFSETCLEAR		0x20	/* apply compensation for clear ev. */
+
+#define PPS_CANWAIT		0x100	/* can we wait for an event? */
+#define PPS_CANPOLL		0x200	/* bit reserved for future use */
+
+/* Kernel actions */
+#define PPS_ECHOASSERT		0x40	/* feed back assert event to output */
+#define PPS_ECHOCLEAR		0x80	/* feed back clear event to output */
+
+/* Timestamp formats */
+#define PPS_TSFMT_TSPEC		0x1000	/* select timespec format */
+#define PPS_TSFMT_NTPFP		0x2000	/* select NTP format */
+
+/*
+ * 3.4.4 New functions: disciplining the kernel timebase
+ */
+
+/* Kernel consumers */
+#define PPS_KC_HARDPPS		0	/* hardpps() (or equivalent) */
+#define PPS_KC_HARDPPS_PLL	1	/* hardpps() constrained to
+					   use a phase-locked loop */
+#define PPS_KC_HARDPPS_FLL	2	/* hardpps() constrained to
+					   use a frequency-locked loop */
+/*
+ * Here begins the implementation-specific part!
+ */
+
+struct pps_fdata {
+	struct pps_kinfo info;
+	struct pps_ktime timeout;
+};
+
+#include <linux/ioctl.h>
+
+#define PPS_GETPARAMS		_IOR('p', 0xa1, struct pps_kparams *)
+#define PPS_SETPARAMS		_IOW('p', 0xa2, struct pps_kparams *)
+#define PPS_GETCAP		_IOR('p', 0xa3, int *)
+#define PPS_FETCH		_IOWR('p', 0xa4, struct pps_fdata *)
+
+#endif /* _PPS_H_ */
diff --git a/include/linux/pps_kernel.h b/include/linux/pps_kernel.h
new file mode 100644
index 00000000000..e0a193f830e
--- /dev/null
+++ b/include/linux/pps_kernel.h
@@ -0,0 +1,89 @@
+/*
+ * PPS API kernel header
+ *
+ * Copyright (C) 2009   Rodolfo Giometti <giometti@linux.it>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/pps.h>
+
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/time.h>
+
+/*
+ * Global defines
+ */
+
+/* The specific PPS source info */
+struct pps_source_info {
+	char name[PPS_MAX_NAME_LEN];		/* simbolic name */
+	char path[PPS_MAX_NAME_LEN];		/* path of connected device */
+	int mode;				/* PPS's allowed mode */
+
+	void (*echo)(int source, int event, void *data); /* PPS echo function */
+
+	struct module *owner;
+	struct device *dev;
+};
+
+/* The main struct */
+struct pps_device {
+	struct pps_source_info info;		/* PSS source info */
+
+	struct pps_kparams params;		/* PPS's current params */
+
+	__u32 assert_sequence;			/* PPS' assert event seq # */
+	__u32 clear_sequence;			/* PPS' clear event seq # */
+	struct pps_ktime assert_tu;
+	struct pps_ktime clear_tu;
+	int current_mode;			/* PPS mode at event time */
+
+	int go;					/* PPS event is arrived? */
+	wait_queue_head_t queue;		/* PPS event queue */
+
+	unsigned int id;			/* PPS source unique ID */
+	struct cdev cdev;
+	struct device *dev;
+	int devno;
+	struct fasync_struct *async_queue;	/* fasync method */
+	spinlock_t lock;
+
+	atomic_t usage;				/* usage count */
+};
+
+/*
+ * Global variables
+ */
+
+extern spinlock_t pps_idr_lock;
+extern struct idr pps_idr;
+extern struct timespec pps_irq_ts[];
+
+extern struct device_attribute pps_attrs[];
+
+/*
+ * Exported functions
+ */
+
+struct pps_device *pps_get_source(int source);
+extern void pps_put_source(struct pps_device *pps);
+extern int pps_register_source(struct pps_source_info *info,
+				int default_params);
+extern void pps_unregister_source(int source);
+extern int pps_register_cdev(struct pps_device *pps);
+extern void pps_unregister_cdev(struct pps_device *pps);
+extern void pps_event(int source, struct pps_ktime *ts, int event, void *data);
diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
index 59e133d39d5..7456d7d87a1 100644
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -81,7 +81,6 @@
 
 
 extern long arch_ptrace(struct task_struct *child, long request, long addr, long data);
-extern struct task_struct *ptrace_get_task_struct(pid_t pid);
 extern int ptrace_traceme(void);
 extern int ptrace_readdata(struct task_struct *tsk, unsigned long src, char __user *dst, int len);
 extern int ptrace_writedata(struct task_struct *tsk, char __user *src, unsigned long dst, int len);
diff --git a/include/linux/raid/md_p.h b/include/linux/raid/md_p.h
index 6ba830fa853..ffa2efbbe38 100644
--- a/include/linux/raid/md_p.h
+++ b/include/linux/raid/md_p.h
@@ -232,7 +232,7 @@ struct mdp_superblock_1 {
 	__le64	reshape_position;	/* next address in array-space for reshape */
 	__le32	delta_disks;	/* change in number of raid_disks		*/
 	__le32	new_layout;	/* new layout					*/
-	__le32	new_chunk;	/* new chunk size (bytes)			*/
+	__le32	new_chunk;	/* new chunk size (512byte sectors)		*/
 	__u8	pad1[128-124];	/* set to 0 when written */
 
 	/* constant this-device information - 64 bytes */
diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h
index 2245c78d587..dd31e7bae35 100644
--- a/include/linux/reiserfs_fs.h
+++ b/include/linux/reiserfs_fs.h
@@ -660,23 +660,54 @@ static inline void set_le_key_k_type(int version, struct reiserfs_key *key,
 		   cpu_to_le32(type2uniqueness(type)))
 	    : (void)(set_offset_v2_k_type(&(key->u.k_offset_v2), type));
 }
+
 static inline void set_le_ih_k_type(struct item_head *ih, int type)
 {
 	set_le_key_k_type(ih_version(ih), &(ih->ih_key), type);
 }
 
-#define is_direntry_le_key(version,key) (le_key_k_type (version, key) == TYPE_DIRENTRY)
-#define is_direct_le_key(version,key) (le_key_k_type (version, key) == TYPE_DIRECT)
-#define is_indirect_le_key(version,key) (le_key_k_type (version, key) == TYPE_INDIRECT)
-#define is_statdata_le_key(version,key) (le_key_k_type (version, key) == TYPE_STAT_DATA)
+static inline int is_direntry_le_key(int version, struct reiserfs_key *key)
+{
+	return le_key_k_type(version, key) == TYPE_DIRENTRY;
+}
+
+static inline int is_direct_le_key(int version, struct reiserfs_key *key)
+{
+	return le_key_k_type(version, key) == TYPE_DIRECT;
+}
+
+static inline int is_indirect_le_key(int version, struct reiserfs_key *key)
+{
+	return le_key_k_type(version, key) == TYPE_INDIRECT;
+}
+
+static inline int is_statdata_le_key(int version, struct reiserfs_key *key)
+{
+	return le_key_k_type(version, key) == TYPE_STAT_DATA;
+}
 
 //
 // item header has version.
 //
-#define is_direntry_le_ih(ih) is_direntry_le_key (ih_version (ih), &((ih)->ih_key))
-#define is_direct_le_ih(ih) is_direct_le_key (ih_version (ih), &((ih)->ih_key))
-#define is_indirect_le_ih(ih) is_indirect_le_key (ih_version(ih), &((ih)->ih_key))
-#define is_statdata_le_ih(ih) is_statdata_le_key (ih_version (ih), &((ih)->ih_key))
+static inline int is_direntry_le_ih(struct item_head *ih)
+{
+	return is_direntry_le_key(ih_version(ih), &ih->ih_key);
+}
+
+static inline int is_direct_le_ih(struct item_head *ih)
+{
+	return is_direct_le_key(ih_version(ih), &ih->ih_key);
+}
+
+static inline int is_indirect_le_ih(struct item_head *ih)
+{
+	return is_indirect_le_key(ih_version(ih), &ih->ih_key);
+}
+
+static inline int is_statdata_le_ih(struct item_head *ih)
+{
+	return is_statdata_le_key(ih_version(ih), &ih->ih_key);
+}
 
 //
 // key is pointer to cpu key, result is cpu
diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h
index 4c5bcf6ca7e..511f42fc681 100644
--- a/include/linux/res_counter.h
+++ b/include/linux/res_counter.h
@@ -49,6 +49,8 @@ struct res_counter {
 	struct res_counter *parent;
 };
 
+#define RESOURCE_MAX (unsigned long long)LLONG_MAX
+
 /**
  * Helpers to interact with userspace
  * res_counter_read_u64() - returns the value of the specified member.
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index 16e39c7a67f..e73e2429a1b 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -160,8 +160,9 @@ struct rfkill * __must_check rfkill_alloc(const char *name,
  * the rfkill structure. Before calling this function the driver needs
  * to be ready to service method calls from rfkill.
  *
- * If the software blocked state is not set before registration,
- * set_block will be called to initialize it to a default value.
+ * If rfkill_init_sw_state() is not called before registration,
+ * set_block() will be called to initialize the software blocked state
+ * to a default value.
  *
  * If the hardware blocked state is not set before registration,
  * it is assumed to be unblocked.
@@ -234,9 +235,11 @@ bool __must_check rfkill_set_hw_state(struct rfkill *rfkill, bool blocked);
  * rfkill drivers that get events when the soft-blocked state changes
  * (yes, some platforms directly act on input but allow changing again)
  * use this function to notify the rfkill core (and through that also
- * userspace) of the current state.  It is not necessary to notify on
- * resume; since hibernation can always change the soft-blocked state,
- * the rfkill core will unconditionally restore the previous state.
+ * userspace) of the current state.
+ *
+ * Drivers should also call this function after resume if the state has
+ * been changed by the user.  This only makes sense for "persistent"
+ * devices (see rfkill_init_sw_state()).
  *
  * This function can be called in any context, even from within rfkill
  * callbacks.
@@ -247,6 +250,22 @@ bool __must_check rfkill_set_hw_state(struct rfkill *rfkill, bool blocked);
 bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked);
 
 /**
+ * rfkill_init_sw_state - Initialize persistent software block state
+ * @rfkill: pointer to the rfkill class to modify.
+ * @state: the current software block state to set
+ *
+ * rfkill drivers that preserve their software block state over power off
+ * use this function to notify the rfkill core (and through that also
+ * userspace) of their initial state.  It should only be used before
+ * registration.
+ *
+ * In addition, it marks the device as "persistent", an attribute which
+ * can be read by userspace.  Persistent devices are expected to preserve
+ * their own state when suspended.
+ */
+void rfkill_init_sw_state(struct rfkill *rfkill, bool blocked);
+
+/**
  * rfkill_set_states - Set the internal rfkill block states
  * @rfkill: pointer to the rfkill class to modify.
  * @sw: the current software block state to set
@@ -307,6 +326,10 @@ static inline bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked)
 	return blocked;
 }
 
+static inline void rfkill_init_sw_state(struct rfkill *rfkill, bool blocked)
+{
+}
+
 static inline void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw)
 {
 }
diff --git a/include/linux/rmap.h b/include/linux/rmap.h
index 216d024f830..bf116d0dbf2 100644
--- a/include/linux/rmap.h
+++ b/include/linux/rmap.h
@@ -118,7 +118,14 @@ int try_to_munlock(struct page *);
 #define anon_vma_prepare(vma)	(0)
 #define anon_vma_link(vma)	do {} while (0)
 
-#define page_referenced(page, locked, cnt, flags) TestClearPageReferenced(page)
+static inline int page_referenced(struct page *page, int is_locked,
+				  struct mem_cgroup *cnt,
+				  unsigned long *vm_flags)
+{
+	*vm_flags = 0;
+	return TestClearPageReferenced(page);
+}
+
 #define try_to_unmap(page, refs) SWAP_FAIL
 
 static inline int page_mkclean(struct page *page)
diff --git a/include/linux/rotary_encoder.h b/include/linux/rotary_encoder.h
index 12d63a30c34..215278b8df2 100644
--- a/include/linux/rotary_encoder.h
+++ b/include/linux/rotary_encoder.h
@@ -8,6 +8,8 @@ struct rotary_encoder_platform_data {
 	unsigned int gpio_b;
 	unsigned int inverted_a;
 	unsigned int inverted_b;
+	bool relative_axis;
+	bool rollover;
 };
 
 #endif /* __ROTARY_ENCODER_H__ */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 02042e7f219..4d075426988 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -92,7 +92,6 @@ struct sched_param {
 
 #include <asm/processor.h>
 
-struct mem_cgroup;
 struct exec_domain;
 struct futex_pi_state;
 struct robust_list_head;
@@ -1879,9 +1878,6 @@ extern struct pid_namespace init_pid_ns;
 /*
  * find a task by one of its numerical ids
  *
- * find_task_by_pid_type_ns():
- *      it is the most generic call - it finds a task by all id,
- *      type and namespace specified
  * find_task_by_pid_ns():
  *      finds a task by its pid in the specified namespace
  * find_task_by_vpid():
@@ -1890,9 +1886,6 @@ extern struct pid_namespace init_pid_ns;
  * see also find_vpid() etc in include/linux/pid.h
  */
 
-extern struct task_struct *find_task_by_pid_type_ns(int type, int pid,
-		struct pid_namespace *ns);
-
 extern struct task_struct *find_task_by_vpid(pid_t nr);
 extern struct task_struct *find_task_by_pid_ns(pid_t nr,
 		struct pid_namespace *ns);
diff --git a/include/linux/seq_file.h b/include/linux/seq_file.h
index 004f3b3342c..0c6a86b7959 100644
--- a/include/linux/seq_file.h
+++ b/include/linux/seq_file.h
@@ -43,6 +43,7 @@ int seq_release(struct inode *, struct file *);
 int seq_escape(struct seq_file *, const char *, const char *);
 int seq_putc(struct seq_file *m, char c);
 int seq_puts(struct seq_file *m, const char *s);
+int seq_write(struct seq_file *seq, const void *data, size_t len);
 
 int seq_printf(struct seq_file *, const char *, ...)
 	__attribute__ ((format (printf,2,3)));
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 6fd80c4243f..23d2fb051f9 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -171,6 +171,9 @@
 /* Timberdale UART */
 #define PORT_TIMBUART	87
 
+/* Qualcomm MSM SoCs */
+#define PORT_MSM	88
+
 #ifdef __KERNEL__
 
 #include <linux/compiler.h>
diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h
index 96c0d93fc2c..850db2e8051 100644
--- a/include/linux/serial_reg.h
+++ b/include/linux/serial_reg.h
@@ -323,6 +323,7 @@
 #define UART_OMAP_MVER		0x14	/* Module version register */
 #define UART_OMAP_SYSC		0x15	/* System configuration register */
 #define UART_OMAP_SYSS		0x16	/* System status register */
+#define UART_OMAP_WER		0x17	/* Wake-up enable register */
 
 #endif /* _LINUX_SERIAL_REG_H */
 
diff --git a/include/linux/serio.h b/include/linux/serio.h
index e0417e4d3f1..126d24c9eaa 100644
--- a/include/linux/serio.h
+++ b/include/linux/serio.h
@@ -15,6 +15,7 @@
 
 #ifdef __KERNEL__
 
+#include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
 #include <linux/spinlock.h>
@@ -28,7 +29,10 @@ struct serio {
 	char name[32];
 	char phys[32];
 
-	unsigned int manual_bind;
+	bool manual_bind;
+	bool registered;	/* port has been fully registered with driver core */
+	bool suspended;		/* port is suspended */
+
 
 	struct serio_device_id id;
 
@@ -47,7 +51,6 @@ struct serio {
 	struct mutex drv_mutex;		/* protects serio->drv so attributes can pin driver */
 
 	struct device dev;
-	unsigned int registered;	/* port has been fully registered with driver core */
 
 	struct list_head node;
 };
@@ -58,7 +61,7 @@ struct serio_driver {
 	char *description;
 
 	struct serio_device_id *id_table;
-	unsigned int manual_bind;
+	bool manual_bind;
 
 	void (*write_wakeup)(struct serio *);
 	irqreturn_t (*interrupt)(struct serio *, unsigned char, unsigned int);
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 63ef24bc01d..b47b3f039d1 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -265,7 +265,7 @@ typedef unsigned char *sk_buff_data_t;
  *	@transport_header: Transport layer header
  *	@network_header: Network layer header
  *	@mac_header: Link layer header
- *	@dst: destination entry
+ *	@_skb_dst: destination entry
  *	@sp: the security path, used for xfrm
  *	@cb: Control buffer. Free for use by every layer. Put private vars here
  *	@len: Length of actual data
diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h
index 2ea20320c09..51948eb6927 100644
--- a/include/linux/spi/ads7846.h
+++ b/include/linux/spi/ads7846.h
@@ -17,6 +17,7 @@ struct ads7846_platform_data {
 	u16	vref_mv;		/* external vref value, milliVolts */
 	bool	keep_vref_on;		/* set to keep vref on for differential
 					 * measurements as well */
+	bool	swap_xy;		/* swap x and y axes */
 
 	/* Settling time of the analog signals; a function of Vcc and the
 	 * capacitance on the X/Y drivers.  If set to non-zero, two samples
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index a0faa18f7b1..9c4cd27f468 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -245,6 +245,9 @@ struct spi_master {
 	 */
 	u16			dma_alignment;
 
+	/* spi_device.mode flags understood by this controller driver */
+	u16			mode_bits;
+
 	/* Setup mode and clock, etc (spi driver may call many times).
 	 *
 	 * IMPORTANT:  this may be called when transfers to another
@@ -523,30 +526,7 @@ static inline void spi_message_free(struct spi_message *m)
 	kfree(m);
 }
 
-/**
- * spi_setup - setup SPI mode and clock rate
- * @spi: the device whose settings are being modified
- * Context: can sleep, and no requests are queued to the device
- *
- * SPI protocol drivers may need to update the transfer mode if the
- * device doesn't work with its default.  They may likewise need
- * to update clock rates or word sizes from initial values.  This function
- * changes those settings, and must be called from a context that can sleep.
- * Except for SPI_CS_HIGH, which takes effect immediately, the changes take
- * effect the next time the device is selected and data is transferred to
- * or from it.  When this function returns, the spi device is deselected.
- *
- * Note that this call will fail if the protocol driver specifies an option
- * that the underlying controller or its driver does not support.  For
- * example, not all hardware supports wire transfers using nine bit words,
- * LSB-first wire encoding, or active-high chipselects.
- */
-static inline int
-spi_setup(struct spi_device *spi)
-{
-	return spi->master->setup(spi);
-}
-
+extern int spi_setup(struct spi_device *spi);
 
 /**
  * spi_async - asynchronous SPI transfer
diff --git a/include/linux/sunrpc/bc_xprt.h b/include/linux/sunrpc/bc_xprt.h
new file mode 100644
index 00000000000..6508f0dc0ef
--- /dev/null
+++ b/include/linux/sunrpc/bc_xprt.h
@@ -0,0 +1,49 @@
+/******************************************************************************
+
+(c) 2008 NetApp.  All Rights Reserved.
+
+NetApp provides this source code under the GPL v2 License.
+The GPL v2 license is available at
+http://opensource.org/licenses/gpl-license.php.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+******************************************************************************/
+
+/*
+ * Functions to create and manage the backchannel
+ */
+
+#ifndef _LINUX_SUNRPC_BC_XPRT_H
+#define _LINUX_SUNRPC_BC_XPRT_H
+
+#include <linux/sunrpc/svcsock.h>
+#include <linux/sunrpc/xprt.h>
+#include <linux/sunrpc/sched.h>
+
+#ifdef CONFIG_NFS_V4_1
+struct rpc_rqst *xprt_alloc_bc_request(struct rpc_xprt *xprt);
+void xprt_free_bc_request(struct rpc_rqst *req);
+int xprt_setup_backchannel(struct rpc_xprt *, unsigned int min_reqs);
+void xprt_destroy_backchannel(struct rpc_xprt *, int max_reqs);
+void bc_release_request(struct rpc_task *);
+int bc_send(struct rpc_rqst *req);
+#else /* CONFIG_NFS_V4_1 */
+static inline int xprt_setup_backchannel(struct rpc_xprt *xprt,
+					 unsigned int min_reqs)
+{
+	return 0;
+}
+#endif /* CONFIG_NFS_V4_1 */
+#endif /* _LINUX_SUNRPC_BC_XPRT_H */
+
diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h
index c39a21040dc..37881f1a0bd 100644
--- a/include/linux/sunrpc/clnt.h
+++ b/include/linux/sunrpc/clnt.h
@@ -143,6 +143,7 @@ int		rpc_call_sync(struct rpc_clnt *clnt,
 			      const struct rpc_message *msg, int flags);
 struct rpc_task *rpc_call_null(struct rpc_clnt *clnt, struct rpc_cred *cred,
 			       int flags);
+void		rpc_restart_call_prepare(struct rpc_task *);
 void		rpc_restart_call(struct rpc_task *);
 void		rpc_setbufsize(struct rpc_clnt *, unsigned int, unsigned int);
 size_t		rpc_max_payload(struct rpc_clnt *);
diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h
index 64981a2f1ca..401097781fc 100644
--- a/include/linux/sunrpc/sched.h
+++ b/include/linux/sunrpc/sched.h
@@ -210,6 +210,8 @@ struct rpc_wait_queue {
  */
 struct rpc_task *rpc_new_task(const struct rpc_task_setup *);
 struct rpc_task *rpc_run_task(const struct rpc_task_setup *);
+struct rpc_task *rpc_run_bc_task(struct rpc_rqst *req,
+				const struct rpc_call_ops *ops);
 void		rpc_put_task(struct rpc_task *);
 void		rpc_exit_task(struct rpc_task *);
 void		rpc_release_calldata(const struct rpc_call_ops *, void *);
@@ -237,6 +239,7 @@ void		rpc_show_tasks(void);
 int		rpc_init_mempool(void);
 void		rpc_destroy_mempool(void);
 extern struct workqueue_struct *rpciod_workqueue;
+void		rpc_prepare_task(struct rpc_task *task);
 
 static inline void rpc_exit(struct rpc_task *task, int status)
 {
diff --git a/include/linux/sunrpc/svc.h b/include/linux/sunrpc/svc.h
index 2a30775959e..ea8009695c6 100644
--- a/include/linux/sunrpc/svc.h
+++ b/include/linux/sunrpc/svc.h
@@ -96,6 +96,15 @@ struct svc_serv {
 	svc_thread_fn		sv_function;	/* main function for threads */
 	unsigned int		sv_drc_max_pages; /* Total pages for DRC */
 	unsigned int		sv_drc_pages_used;/* DRC pages used */
+#if defined(CONFIG_NFS_V4_1)
+	struct list_head	sv_cb_list;	/* queue for callback requests
+						 * that arrive over the same
+						 * connection */
+	spinlock_t		sv_cb_lock;	/* protects the svc_cb_list */
+	wait_queue_head_t	sv_cb_waitq;	/* sleep here if there are no
+						 * entries in the svc_cb_list */
+	struct svc_xprt		*bc_xprt;
+#endif /* CONFIG_NFS_V4_1 */
 };
 
 /*
@@ -411,6 +420,8 @@ int		   svc_set_num_threads(struct svc_serv *, struct svc_pool *, int);
 int		   svc_pool_stats_open(struct svc_serv *serv, struct file *file);
 void		   svc_destroy(struct svc_serv *);
 int		   svc_process(struct svc_rqst *);
+int		   bc_svc_process(struct svc_serv *, struct rpc_rqst *,
+			struct svc_rqst *);
 int		   svc_register(const struct svc_serv *, const int,
 				const unsigned short, const unsigned short);
 
diff --git a/include/linux/sunrpc/svc_xprt.h b/include/linux/sunrpc/svc_xprt.h
index 0d9cb6ef28b..2223ae0b5ed 100644
--- a/include/linux/sunrpc/svc_xprt.h
+++ b/include/linux/sunrpc/svc_xprt.h
@@ -83,7 +83,7 @@ int	svc_port_is_privileged(struct sockaddr *sin);
 int	svc_print_xprts(char *buf, int maxlen);
 struct	svc_xprt *svc_find_xprt(struct svc_serv *serv, const char *xcl_name,
 			const sa_family_t af, const unsigned short port);
-int	svc_xprt_names(struct svc_serv *serv, char *buf, int buflen);
+int	svc_xprt_names(struct svc_serv *serv, char *buf, const int buflen);
 
 static inline void svc_xprt_get(struct svc_xprt *xprt)
 {
@@ -118,7 +118,7 @@ static inline unsigned short svc_addr_port(const struct sockaddr *sa)
 	return 0;
 }
 
-static inline size_t svc_addr_len(struct sockaddr *sa)
+static inline size_t svc_addr_len(const struct sockaddr *sa)
 {
 	switch (sa->sa_family) {
 	case AF_INET:
@@ -126,7 +126,8 @@ static inline size_t svc_addr_len(struct sockaddr *sa)
 	case AF_INET6:
 		return sizeof(struct sockaddr_in6);
 	}
-	return -EAFNOSUPPORT;
+
+	return 0;
 }
 
 static inline unsigned short svc_xprt_local_port(const struct svc_xprt *xprt)
diff --git a/include/linux/sunrpc/svcsock.h b/include/linux/sunrpc/svcsock.h
index 483e10380aa..04dba23c59f 100644
--- a/include/linux/sunrpc/svcsock.h
+++ b/include/linux/sunrpc/svcsock.h
@@ -38,10 +38,15 @@ int		svc_recv(struct svc_rqst *, long);
 int		svc_send(struct svc_rqst *);
 void		svc_drop(struct svc_rqst *);
 void		svc_sock_update_bufs(struct svc_serv *serv);
-int		svc_sock_names(char *buf, struct svc_serv *serv, char *toclose);
-int		svc_addsock(struct svc_serv *serv, int fd, char *name_return);
+int		svc_sock_names(struct svc_serv *serv, char *buf,
+					const size_t buflen,
+					const char *toclose);
+int		svc_addsock(struct svc_serv *serv, const int fd,
+					char *name_return, const size_t len);
 void		svc_init_xprt_sock(void);
 void		svc_cleanup_xprt_sock(void);
+struct svc_xprt *svc_sock_create(struct svc_serv *serv, int prot);
+void		svc_sock_destroy(struct svc_xprt *);
 
 /*
  * svc_makesock socket characteristics
diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h
index 08afe43118f..1175d58efc2 100644
--- a/include/linux/sunrpc/xprt.h
+++ b/include/linux/sunrpc/xprt.h
@@ -67,7 +67,8 @@ struct rpc_rqst {
 	struct rpc_task *	rq_task;	/* RPC task data */
 	__be32			rq_xid;		/* request XID */
 	int			rq_cong;	/* has incremented xprt->cong */
-	int			rq_received;	/* receive completed */
+	int			rq_reply_bytes_recvd;	/* number of reply */
+							/* bytes received */
 	u32			rq_seqno;	/* gss seq no. used on req. */
 	int			rq_enc_pages_num;
 	struct page		**rq_enc_pages;	/* scratch pages for use by
@@ -97,6 +98,12 @@ struct rpc_rqst {
 
 	unsigned long		rq_xtime;	/* when transmitted */
 	int			rq_ntrans;
+
+#if defined(CONFIG_NFS_V4_1)
+	struct list_head	rq_bc_list;	/* Callback service list */
+	unsigned long		rq_bc_pa_state;	/* Backchannel prealloc state */
+	struct list_head	rq_bc_pa_list;	/* Backchannel prealloc list */
+#endif /* CONFIG_NFS_V4_1 */
 };
 #define rq_svec			rq_snd_buf.head
 #define rq_slen			rq_snd_buf.len
@@ -174,6 +181,15 @@ struct rpc_xprt {
 	spinlock_t		reserve_lock;	/* lock slot table */
 	u32			xid;		/* Next XID value to use */
 	struct rpc_task *	snd_task;	/* Task blocked in send */
+#if defined(CONFIG_NFS_V4_1)
+	struct svc_serv		*bc_serv;       /* The RPC service which will */
+						/* process the callback */
+	unsigned int		bc_alloc_count;	/* Total number of preallocs */
+	spinlock_t		bc_pa_lock;	/* Protects the preallocated
+						 * items */
+	struct list_head	bc_pa_list;	/* List of preallocated
+						 * backchannel rpc_rqst's */
+#endif /* CONFIG_NFS_V4_1 */
 	struct list_head	recv;
 
 	struct {
@@ -192,6 +208,26 @@ struct rpc_xprt {
 	const char		*address_strings[RPC_DISPLAY_MAX];
 };
 
+#if defined(CONFIG_NFS_V4_1)
+/*
+ * Backchannel flags
+ */
+#define	RPC_BC_PA_IN_USE	0x0001		/* Preallocated backchannel */
+						/* buffer in use */
+#endif /* CONFIG_NFS_V4_1 */
+
+#if defined(CONFIG_NFS_V4_1)
+static inline int bc_prealloc(struct rpc_rqst *req)
+{
+	return test_bit(RPC_BC_PA_IN_USE, &req->rq_bc_pa_state);
+}
+#else
+static inline int bc_prealloc(struct rpc_rqst *req)
+{
+	return 0;
+}
+#endif /* CONFIG_NFS_V4_1 */
+
 struct xprt_create {
 	int			ident;		/* XPRT_TRANSPORT identifier */
 	struct sockaddr *	srcaddr;	/* optional local address */
diff --git a/include/linux/swap.h b/include/linux/swap.h
index 0cedf31af0b..7c15334f3ff 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -298,8 +298,8 @@ extern int try_to_free_swap(struct page *);
 struct backing_dev_info;
 
 /* linux/mm/thrash.c */
-extern struct mm_struct * swap_token_mm;
-extern void grab_swap_token(void);
+extern struct mm_struct *swap_token_mm;
+extern void grab_swap_token(struct mm_struct *);
 extern void __put_swap_token(struct mm_struct *);
 
 static inline int has_swap_token(struct mm_struct *mm)
@@ -319,10 +319,11 @@ static inline void disable_swap_token(void)
 }
 
 #ifdef CONFIG_CGROUP_MEM_RES_CTLR
-extern void mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent);
+extern void
+mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent, bool swapout);
 #else
 static inline void
-mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent)
+mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent, bool swapout)
 {
 }
 #endif
@@ -418,16 +419,10 @@ static inline swp_entry_t get_swap_page(void)
 }
 
 /* linux/mm/thrash.c */
-#define put_swap_token(x) do { } while(0)
-#define grab_swap_token()  do { } while(0)
-#define has_swap_token(x) 0
-#define disable_swap_token() do { } while(0)
-
-static inline int mem_cgroup_cache_charge_swapin(struct page *page,
-			struct mm_struct *mm, gfp_t mask, bool locked)
-{
-	return 0;
-}
+#define put_swap_token(mm)	do { } while (0)
+#define grab_swap_token(mm)	do { } while (0)
+#define has_swap_token(mm)	0
+#define disable_swap_token()	do { } while (0)
 
 static inline void
 mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent)
diff --git a/include/linux/trace_seq.h b/include/linux/trace_seq.h
index c68bccba207..c134dd1fe6b 100644
--- a/include/linux/trace_seq.h
+++ b/include/linux/trace_seq.h
@@ -3,6 +3,8 @@
 
 #include <linux/fs.h>
 
+#include <asm/page.h>
+
 /*
  * Trace sequences are used to allow a function to call several other functions
  * to create a string of data to use (up to a max of PAGE_SIZE.
diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
index eb96603d92d..17ba82efa48 100644
--- a/include/linux/tracehook.h
+++ b/include/linux/tracehook.h
@@ -143,7 +143,7 @@ static inline void tracehook_report_syscall_exit(struct pt_regs *regs, int step)
  *
  * Return %LSM_UNSAFE_* bits applied to an exec because of tracing.
  *
- * Called with task_lock() held on @task.
+ * @task->cred_guard_mutex is held by the caller through the do_execve().
  */
 static inline int tracehook_unsafe_exec(struct task_struct *task)
 {
diff --git a/include/linux/types.h b/include/linux/types.h
index 5abe354020f..c42724f8c80 100644
--- a/include/linux/types.h
+++ b/include/linux/types.h
@@ -131,7 +131,7 @@ typedef		__s64		int64_t;
  *
  * blkcnt_t is the type of the inode's block count.
  */
-#ifdef CONFIG_LBD
+#ifdef CONFIG_LBDAF
 typedef u64 sector_t;
 typedef u64 blkcnt_t;
 #else
diff --git a/include/linux/ucb1400.h b/include/linux/ucb1400.h
index 970473bf8d5..ed889f4168f 100644
--- a/include/linux/ucb1400.h
+++ b/include/linux/ucb1400.h
@@ -134,28 +134,13 @@ static inline void ucb1400_adc_enable(struct snd_ac97 *ac97)
 	ucb1400_reg_write(ac97, UCB_ADC_CR, UCB_ADC_ENA);
 }
 
-static unsigned int ucb1400_adc_read(struct snd_ac97 *ac97, u16 adc_channel,
-					int adcsync)
-{
-	unsigned int val;
-
-	if (adcsync)
-		adc_channel |= UCB_ADC_SYNC_ENA;
-
-	ucb1400_reg_write(ac97, UCB_ADC_CR, UCB_ADC_ENA | adc_channel);
-	ucb1400_reg_write(ac97, UCB_ADC_CR, UCB_ADC_ENA | adc_channel |
-				UCB_ADC_START);
-
-	while (!((val = ucb1400_reg_read(ac97, UCB_ADC_DATA))
-			& UCB_ADC_DAT_VALID))
-		schedule_timeout_uninterruptible(1);
-
-	return val & UCB_ADC_DAT_MASK;
-}
-
 static inline void ucb1400_adc_disable(struct snd_ac97 *ac97)
 {
 	ucb1400_reg_write(ac97, UCB_ADC_CR, 0);
 }
 
+
+unsigned int ucb1400_adc_read(struct snd_ac97 *ac97, u16 adc_channel,
+			      int adcsync);
+
 #endif
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index f24eceecc5a..8a025d51090 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -348,6 +348,7 @@ struct v4l2_pix_format {
 #define V4L2_PIX_FMT_SQ905C   v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */
 #define V4L2_PIX_FMT_PJPG     v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */
 #define V4L2_PIX_FMT_YVYU     v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */
+#define V4L2_PIX_FMT_OV511    v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */
 #define V4L2_PIX_FMT_OV518    v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */
 
 /*
@@ -894,9 +895,10 @@ enum v4l2_colorfx {
 	V4L2_COLORFX_BW		= 1,
 	V4L2_COLORFX_SEPIA	= 2,
 };
+#define V4L2_CID_AUTOBRIGHTNESS			(V4L2_CID_BASE+32)
 
 /* last CID + 1 */
-#define V4L2_CID_LASTP1                         (V4L2_CID_BASE+32)
+#define V4L2_CID_LASTP1                         (V4L2_CID_BASE+33)
 
 /*  MPEG-class control IDs defined by V4L2 */
 #define V4L2_CID_MPEG_BASE 			(V4L2_CTRL_CLASS_MPEG | 0x900)
diff --git a/include/linux/w1-gpio.h b/include/linux/w1-gpio.h
index 9797fec7748..3adeff82212 100644
--- a/include/linux/w1-gpio.h
+++ b/include/linux/w1-gpio.h
@@ -18,6 +18,7 @@
 struct w1_gpio_platform_data {
 	unsigned int pin;
 	unsigned int is_open_drain:1;
+	void (*enable_external_pullup)(int enable);
 };
 
 #endif /* _LINUX_W1_GPIO_H */
diff --git a/include/media/ir-common.h b/include/media/ir-common.h
index 7b5b91f6042..9dcb632f608 100644
--- a/include/media/ir-common.h
+++ b/include/media/ir-common.h
@@ -162,6 +162,8 @@ extern IR_KEYTAB_TYPE ir_codes_ati_tv_wonder_hd_600[IR_KEYTAB_SIZE];
 extern IR_KEYTAB_TYPE ir_codes_kworld_plus_tv_analog[IR_KEYTAB_SIZE];
 extern IR_KEYTAB_TYPE ir_codes_kaiomy[IR_KEYTAB_SIZE];
 extern IR_KEYTAB_TYPE ir_codes_dm1105_nec[IR_KEYTAB_SIZE];
+extern IR_KEYTAB_TYPE ir_codes_evga_indtube[IR_KEYTAB_SIZE];
+
 #endif
 
 /*
diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
index c48c24e4d0f..33a18426ab9 100644
--- a/include/media/v4l2-common.h
+++ b/include/media/v4l2-common.h
@@ -153,6 +153,22 @@ struct v4l2_subdev *v4l2_i2c_new_probed_subdev(struct v4l2_device *v4l2_dev,
 struct v4l2_subdev *v4l2_i2c_new_probed_subdev_addr(struct v4l2_device *v4l2_dev,
 		struct i2c_adapter *adapter,
 		const char *module_name, const char *client_type, u8 addr);
+
+/* Load an i2c module and return an initialized v4l2_subdev struct.
+   Only call request_module if module_name != NULL.
+   The client_type argument is the name of the chip that's on the adapter. */
+struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev,
+		struct i2c_adapter *adapter,
+		const char *module_name, const char *client_type,
+		int irq, void *platform_data,
+		u8 addr, const unsigned short *probe_addrs);
+
+struct i2c_board_info;
+
+struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev,
+		struct i2c_adapter *adapter, const char *module_name,
+		struct i2c_board_info *info, const unsigned short *probe_addrs);
+
 /* Initialize an v4l2_subdev with data from an i2c_client struct */
 void v4l2_i2c_subdev_init(struct v4l2_subdev *sd, struct i2c_client *client,
 		const struct v4l2_subdev_ops *ops);
@@ -193,4 +209,14 @@ struct v4l2_routing {
 	u32 output;
 };
 
+/* ------------------------------------------------------------------------- */
+
+/* Miscellaneous helper functions */
+
+void v4l_bound_align_image(unsigned int *w, unsigned int wmin,
+			   unsigned int wmax, unsigned int walign,
+			   unsigned int *h, unsigned int hmin,
+			   unsigned int hmax, unsigned int halign,
+			   unsigned int salign);
+
 #endif /* V4L2_COMMON_H_ */
diff --git a/include/media/v4l2-i2c-drv.h b/include/media/v4l2-i2c-drv.h
index 10a2882c3cb..74bf741d1a9 100644
--- a/include/media/v4l2-i2c-drv.h
+++ b/include/media/v4l2-i2c-drv.h
@@ -22,7 +22,7 @@
  */
 
 /* NOTE: the full version of this header is in the v4l-dvb repository
- * and allows v4l i2c drivers to be compiled on older kernels as well.
+ * and allows v4l i2c drivers to be compiled on pre-2.6.26 kernels.
  * The version of this header as it appears in the kernel is a stripped
  * version (without all the backwards compatibility stuff) and so it
  * looks a bit odd.
@@ -30,6 +30,9 @@
  * If you look at the full version then you will understand the reason
  * for introducing this header since you really don't want to have all
  * the tricky backwards compatibility code in each and every i2c driver.
+ *
+ * If the i2c driver will never be compiled for pre-2.6.26 kernels, then
+ * DO NOT USE this header! Just write it as a regular i2c driver.
  */
 
 #ifndef __V4L2_I2C_DRV_H__
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index a503e1cee78..5dcb3678552 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -79,7 +79,11 @@ struct v4l2_decode_vbi_line {
    not yet implemented) since ops provide proper type-checking.
  */
 
-/* init: initialize the sensor registors to some sort of reasonable default
+/* s_config: if set, then it is always called by the v4l2_i2c_new_subdev*
+	functions after the v4l2_subdev was registered. It is used to pass
+	platform data to the subdev which can be used during initialization.
+
+   init: initialize the sensor registors to some sort of reasonable default
 	values. Do not use for new drivers and should be removed in existing
 	drivers.
 
@@ -96,6 +100,7 @@ struct v4l2_decode_vbi_line {
 struct v4l2_subdev_core_ops {
 	int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip);
 	int (*log_status)(struct v4l2_subdev *sd);
+	int (*s_config)(struct v4l2_subdev *sd, int irq, void *platform_data);
 	int (*init)(struct v4l2_subdev *sd, u32 val);
 	int (*load_fw)(struct v4l2_subdev *sd);
 	int (*reset)(struct v4l2_subdev *sd, u32 val);
diff --git a/include/mtd/Kbuild b/include/mtd/Kbuild
index 8eb018f9600..192f8fb7d54 100644
--- a/include/mtd/Kbuild
+++ b/include/mtd/Kbuild
@@ -1,5 +1,4 @@
 header-y += inftl-user.h
-header-y += jffs2-user.h
 header-y += mtd-abi.h
 header-y += mtd-user.h
 header-y += nftl-user.h
diff --git a/include/mtd/jffs2-user.h b/include/mtd/jffs2-user.h
deleted file mode 100644
index fa94b0eb67c..00000000000
--- a/include/mtd/jffs2-user.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * JFFS2 definitions for use in user space only
- */
-
-#ifndef __JFFS2_USER_H__
-#define __JFFS2_USER_H__
-
-/* This file is blessed for inclusion by userspace */
-#include <linux/jffs2.h>
-#include <linux/types.h>
-#include <endian.h>
-#include <byteswap.h>
-
-#undef cpu_to_je16
-#undef cpu_to_je32
-#undef cpu_to_jemode
-#undef je16_to_cpu
-#undef je32_to_cpu
-#undef jemode_to_cpu
-
-extern int target_endian;
-
-#define t16(x) ({ __u16 __b = (x); (target_endian==__BYTE_ORDER)?__b:bswap_16(__b); })
-#define t32(x) ({ __u32 __b = (x); (target_endian==__BYTE_ORDER)?__b:bswap_32(__b); })
-
-#define cpu_to_je16(x) ((jint16_t){t16(x)})
-#define cpu_to_je32(x) ((jint32_t){t32(x)})
-#define cpu_to_jemode(x) ((jmode_t){t32(x)})
-
-#define je16_to_cpu(x) (t16((x).v16))
-#define je32_to_cpu(x) (t32((x).v32))
-#define jemode_to_cpu(x) (t32((x).m))
-
-#endif /* __JFFS2_USER_H__ */
diff --git a/include/mtd/mtd-abi.h b/include/mtd/mtd-abi.h
index b6595b3c68b..be51ae2bd0f 100644
--- a/include/mtd/mtd-abi.h
+++ b/include/mtd/mtd-abi.h
@@ -12,12 +12,24 @@ struct erase_info_user {
 	__u32 length;
 };
 
+struct erase_info_user64 {
+	__u64 start;
+	__u64 length;
+};
+
 struct mtd_oob_buf {
 	__u32 start;
 	__u32 length;
 	unsigned char __user *ptr;
 };
 
+struct mtd_oob_buf64 {
+	__u64 start;
+	__u32 pad;
+	__u32 length;
+	__u64 usr_ptr;
+};
+
 #define MTD_ABSENT		0
 #define MTD_RAM			1
 #define MTD_ROM			2
@@ -95,6 +107,9 @@ struct otp_info {
 #define ECCGETLAYOUT		_IOR('M', 17, struct nand_ecclayout)
 #define ECCGETSTATS		_IOR('M', 18, struct mtd_ecc_stats)
 #define MTDFILEMODE		_IO('M', 19)
+#define MEMERASE64		_IOW('M', 20, struct erase_info_user64)
+#define MEMWRITEOOB64		_IOWR('M', 21, struct mtd_oob_buf64)
+#define MEMREADOOB64		_IOWR('M', 22, struct mtd_oob_buf64)
 
 /*
  * Obsolete legacy interface. Keep it in order not to break userspace
diff --git a/include/net/iucv/af_iucv.h b/include/net/iucv/af_iucv.h
index 21ee49ffcba..f82a1e87737 100644
--- a/include/net/iucv/af_iucv.h
+++ b/include/net/iucv/af_iucv.h
@@ -94,8 +94,6 @@ unsigned int iucv_sock_poll(struct file *file, struct socket *sock,
 			    poll_table *wait);
 void iucv_sock_link(struct iucv_sock_list *l, struct sock *s);
 void iucv_sock_unlink(struct iucv_sock_list *l, struct sock *s);
-int  iucv_sock_wait_state(struct sock *sk, int state, int state2,
-			  unsigned long timeo);
 int  iucv_sock_wait_cnt(struct sock *sk, unsigned long timeo);
 void iucv_accept_enqueue(struct sock *parent, struct sock *sk);
 void iucv_accept_unlink(struct sock *sk);
diff --git a/include/net/sock.h b/include/net/sock.h
index 95bd3fd75f9..07133c5e986 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -1208,6 +1208,39 @@ static inline int skb_copy_to_page(struct sock *sk, char __user *from,
 	return 0;
 }
 
+/**
+ * sk_wmem_alloc_get - returns write allocations
+ * @sk: socket
+ *
+ * Returns sk_wmem_alloc minus initial offset of one
+ */
+static inline int sk_wmem_alloc_get(const struct sock *sk)
+{
+	return atomic_read(&sk->sk_wmem_alloc) - 1;
+}
+
+/**
+ * sk_rmem_alloc_get - returns read allocations
+ * @sk: socket
+ *
+ * Returns sk_rmem_alloc
+ */
+static inline int sk_rmem_alloc_get(const struct sock *sk)
+{
+	return atomic_read(&sk->sk_rmem_alloc);
+}
+
+/**
+ * sk_has_allocations - check if allocations are outstanding
+ * @sk: socket
+ *
+ * Returns true if socket has write or read allocations
+ */
+static inline int sk_has_allocations(const struct sock *sk)
+{
+	return sk_wmem_alloc_get(sk) || sk_rmem_alloc_get(sk);
+}
+
 /*
  * 	Queue a received datagram if it will fit. Stream and sequenced
  *	protocols can't normally use this as they need to fit buffers in
diff --git a/include/net/x25.h b/include/net/x25.h
index fc3f03d976f..2cda0401156 100644
--- a/include/net/x25.h
+++ b/include/net/x25.h
@@ -187,7 +187,7 @@ extern int  x25_addr_ntoa(unsigned char *, struct x25_address *,
 extern int  x25_addr_aton(unsigned char *, struct x25_address *,
 			  struct x25_address *);
 extern struct sock *x25_find_socket(unsigned int, struct x25_neigh *);
-extern void x25_destroy_socket(struct sock *);
+extern void x25_destroy_socket_from_timer(struct sock *);
 extern int  x25_rx_call_request(struct sk_buff *, struct x25_neigh *, unsigned int);
 extern void x25_kill_by_neigh(struct x25_neigh *);
 
diff --git a/include/scsi/fc_encode.h b/include/scsi/fc_encode.h
index 6300f556bce..a0ff61c3e93 100644
--- a/include/scsi/fc_encode.h
+++ b/include/scsi/fc_encode.h
@@ -107,7 +107,6 @@ static inline int fc_ct_fill(struct fc_lport *lport, struct fc_frame *fp,
 		break;
 
 	default:
-		FC_DBG("Invalid op code %x \n", op);
 		return -EINVAL;
 	}
 	*r_ctl = FC_RCTL_DD_UNSOL_CTL;
@@ -298,7 +297,6 @@ static inline int fc_els_fill(struct fc_lport *lport, struct fc_rport *rport,
 		break;
 
 	default:
-		FC_DBG("Invalid op code %x \n", op);
 		return -EINVAL;
 	}
 
diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h
index ebdd9f4cf07..b92584a8843 100644
--- a/include/scsi/libfc.h
+++ b/include/scsi/libfc.h
@@ -34,17 +34,72 @@
 
 #include <scsi/fc_frame.h>
 
-#define LIBFC_DEBUG
-
-#ifdef LIBFC_DEBUG
-/* Log messages */
-#define FC_DBG(fmt, args...)						\
-	do {								\
-		printk(KERN_INFO "%s " fmt, __func__, ##args);		\
-	} while (0)
-#else
-#define FC_DBG(fmt, args...)
-#endif
+#define FC_LIBFC_LOGGING 0x01 /* General logging, not categorized */
+#define FC_LPORT_LOGGING 0x02 /* lport layer logging */
+#define FC_DISC_LOGGING  0x04 /* discovery layer logging */
+#define FC_RPORT_LOGGING 0x08 /* rport layer logging */
+#define FC_FCP_LOGGING   0x10 /* I/O path logging */
+#define FC_EM_LOGGING    0x20 /* Exchange Manager logging */
+#define FC_EXCH_LOGGING  0x40 /* Exchange/Sequence logging */
+#define FC_SCSI_LOGGING  0x80 /* SCSI logging (mostly error handling) */
+
+extern unsigned int fc_debug_logging;
+
+#define FC_CHECK_LOGGING(LEVEL, CMD)				\
+do {								\
+	if (unlikely(fc_debug_logging & LEVEL))			\
+		do {						\
+			CMD;					\
+		} while (0);					\
+} while (0);
+
+#define FC_LIBFC_DBG(fmt, args...)					\
+	FC_CHECK_LOGGING(FC_LIBFC_LOGGING,				\
+			 printk(KERN_INFO "libfc: " fmt, ##args);)
+
+#define FC_LPORT_DBG(lport, fmt, args...)				\
+	FC_CHECK_LOGGING(FC_LPORT_LOGGING,				\
+			 printk(KERN_INFO "lport: %6x: " fmt,		\
+				fc_host_port_id(lport->host), ##args);)
+
+#define FC_DISC_DBG(disc, fmt, args...)					\
+	FC_CHECK_LOGGING(FC_DISC_LOGGING,				\
+			 printk(KERN_INFO "disc: %6x: " fmt,		\
+				fc_host_port_id(disc->lport->host),	\
+				##args);)
+
+#define FC_RPORT_DBG(rport, fmt, args...)				\
+do {									\
+	struct fc_rport_libfc_priv *rdata = rport->dd_data;		\
+	struct fc_lport *lport = rdata->local_port;			\
+	FC_CHECK_LOGGING(FC_RPORT_LOGGING,				\
+			 printk(KERN_INFO "rport: %6x: %6x: " fmt,	\
+				fc_host_port_id(lport->host),		\
+				rport->port_id, ##args);)		\
+} while (0);
+
+#define FC_FCP_DBG(pkt, fmt, args...)					\
+	FC_CHECK_LOGGING(FC_FCP_LOGGING,				\
+			 printk(KERN_INFO "fcp: %6x: %6x: " fmt,	\
+				fc_host_port_id(pkt->lp->host),		\
+				pkt->rport->port_id, ##args);)
+
+#define FC_EM_DBG(em, fmt, args...)					\
+	FC_CHECK_LOGGING(FC_EM_LOGGING,					\
+			 printk(KERN_INFO "em: %6x: " fmt,		\
+				fc_host_port_id(em->lp->host),		\
+				##args);)
+
+#define FC_EXCH_DBG(exch, fmt, args...)					\
+	FC_CHECK_LOGGING(FC_EXCH_LOGGING,				\
+			 printk(KERN_INFO "exch: %6x: %4x: " fmt,	\
+				fc_host_port_id(exch->lp->host),	\
+				exch->xid, ##args);)
+
+#define FC_SCSI_DBG(lport, fmt, args...)				\
+	FC_CHECK_LOGGING(FC_SCSI_LOGGING,                               \
+			 printk(KERN_INFO "scsi: %6x: " fmt,		\
+				fc_host_port_id(lport->host), ##args);)
 
 /*
  * libfc error codes
diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h
index 196525cd402..61afeb59a83 100644
--- a/include/scsi/libiscsi.h
+++ b/include/scsi/libiscsi.h
@@ -125,6 +125,10 @@ struct iscsi_task {
 	struct scsi_cmnd	*sc;		/* associated SCSI cmd*/
 	struct iscsi_conn	*conn;		/* used connection    */
 
+	/* data processing tracking */
+	unsigned long		last_xfer;
+	unsigned long		last_timeout;
+	bool			have_checked_conn;
 	/* state set/tested under session->lock */
 	int			state;
 	atomic_t		refcount;
diff --git a/include/scsi/scsi_driver.h b/include/scsi/scsi_driver.h
index 1f5ca7f6211..9fd6702f02e 100644
--- a/include/scsi/scsi_driver.h
+++ b/include/scsi/scsi_driver.h
@@ -32,5 +32,6 @@ int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req);
 int scsi_setup_fs_cmnd(struct scsi_device *sdev, struct request *req);
 int scsi_prep_state_check(struct scsi_device *sdev, struct request *req);
 int scsi_prep_return(struct request_queue *q, struct request *req, int ret);
+int scsi_prep_fn(struct request_queue *, struct request *);
 
 #endif /* _SCSI_SCSI_DRIVER_H */
diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h
new file mode 100644
index 00000000000..acf4cc9cd36
--- /dev/null
+++ b/include/trace/events/ext4.h
@@ -0,0 +1,719 @@
+#if !defined(_TRACE_EXT4_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_EXT4_H
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM ext4
+
+#include <linux/writeback.h>
+#include "../../../fs/ext4/ext4.h"
+#include "../../../fs/ext4/mballoc.h"
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(ext4_free_inode,
+	TP_PROTO(struct inode *inode),
+
+	TP_ARGS(inode),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	umode_t, mode			)
+		__field(	uid_t,	uid			)
+		__field(	gid_t,	gid			)
+		__field(	blkcnt_t, blocks		)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->mode	= inode->i_mode;
+		__entry->uid	= inode->i_uid;
+		__entry->gid	= inode->i_gid;
+		__entry->blocks	= inode->i_blocks;
+	),
+
+	TP_printk("dev %s ino %lu mode %d uid %u gid %u blocks %llu",
+		  jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->mode,
+		  __entry->uid, __entry->gid, __entry->blocks)
+);
+
+TRACE_EVENT(ext4_request_inode,
+	TP_PROTO(struct inode *dir, int mode),
+
+	TP_ARGS(dir, mode),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	dir			)
+		__field(	umode_t, mode			)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= dir->i_sb->s_dev;
+		__entry->dir	= dir->i_ino;
+		__entry->mode	= mode;
+	),
+
+	TP_printk("dev %s dir %lu mode %d",
+		  jbd2_dev_to_name(__entry->dev), __entry->dir, __entry->mode)
+);
+
+TRACE_EVENT(ext4_allocate_inode,
+	TP_PROTO(struct inode *inode, struct inode *dir, int mode),
+
+	TP_ARGS(inode, dir, mode),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	ino_t,	dir			)
+		__field(	umode_t, mode			)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->dir	= dir->i_ino;
+		__entry->mode	= mode;
+	),
+
+	TP_printk("dev %s ino %lu dir %lu mode %d",
+		  jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->dir, __entry->mode)
+);
+
+TRACE_EVENT(ext4_write_begin,
+
+	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
+		 unsigned int flags),
+
+	TP_ARGS(inode, pos, len, flags),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	loff_t,	pos			)
+		__field(	unsigned int, len		)
+		__field(	unsigned int, flags		)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->pos	= pos;
+		__entry->len	= len;
+		__entry->flags	= flags;
+	),
+
+	TP_printk("dev %s ino %lu pos %llu len %u flags %u",
+		  jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->pos, __entry->len,
+		  __entry->flags)
+);
+
+TRACE_EVENT(ext4_ordered_write_end,
+	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
+			unsigned int copied),
+
+	TP_ARGS(inode, pos, len, copied),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	loff_t,	pos			)
+		__field(	unsigned int, len		)
+		__field(	unsigned int, copied		)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->pos	= pos;
+		__entry->len	= len;
+		__entry->copied	= copied;
+	),
+
+	TP_printk("dev %s ino %lu pos %llu len %u copied %u",
+		  jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->pos, __entry->len,
+		  __entry->copied)
+);
+
+TRACE_EVENT(ext4_writeback_write_end,
+	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
+		 unsigned int copied),
+
+	TP_ARGS(inode, pos, len, copied),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	loff_t,	pos			)
+		__field(	unsigned int, len		)
+		__field(	unsigned int, copied		)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->pos	= pos;
+		__entry->len	= len;
+		__entry->copied	= copied;
+	),
+
+	TP_printk("dev %s ino %lu pos %llu len %u copied %u",
+		  jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->pos, __entry->len,
+		  __entry->copied)
+);
+
+TRACE_EVENT(ext4_journalled_write_end,
+	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
+		 unsigned int copied),
+	TP_ARGS(inode, pos, len, copied),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	loff_t,	pos			)
+		__field(	unsigned int, len		)
+		__field(	unsigned int, copied		)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->pos	= pos;
+		__entry->len	= len;
+		__entry->copied	= copied;
+	),
+
+	TP_printk("dev %s ino %lu pos %llu len %u copied %u",
+		  jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->pos, __entry->len,
+		  __entry->copied)
+);
+
+TRACE_EVENT(ext4_da_writepage,
+	TP_PROTO(struct inode *inode, struct page *page),
+
+	TP_ARGS(inode, page),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	pgoff_t, index			)
+
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->index	= page->index;
+	),
+
+	TP_printk("dev %s ino %lu page_index %lu",
+		  jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->index)
+);
+
+TRACE_EVENT(ext4_da_writepages,
+	TP_PROTO(struct inode *inode, struct writeback_control *wbc),
+
+	TP_ARGS(inode, wbc),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	long,	nr_to_write		)
+		__field(	long,	pages_skipped		)
+		__field(	loff_t,	range_start		)
+		__field(	loff_t,	range_end		)
+		__field(	char,	nonblocking		)
+		__field(	char,	for_kupdate		)
+		__field(	char,	for_reclaim		)
+		__field(	char,	for_writepages		)
+		__field(	char,	range_cyclic		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= inode->i_sb->s_dev;
+		__entry->ino		= inode->i_ino;
+		__entry->nr_to_write	= wbc->nr_to_write;
+		__entry->pages_skipped	= wbc->pages_skipped;
+		__entry->range_start	= wbc->range_start;
+		__entry->range_end	= wbc->range_end;
+		__entry->nonblocking	= wbc->nonblocking;
+		__entry->for_kupdate	= wbc->for_kupdate;
+		__entry->for_reclaim	= wbc->for_reclaim;
+		__entry->for_writepages	= wbc->for_writepages;
+		__entry->range_cyclic	= wbc->range_cyclic;
+	),
+
+	TP_printk("dev %s ino %lu nr_t_write %ld pages_skipped %ld range_start %llu range_end %llu nonblocking %d for_kupdate %d for_reclaim %d for_writepages %d range_cyclic %d",
+		  jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->nr_to_write,
+		  __entry->pages_skipped, __entry->range_start,
+		  __entry->range_end, __entry->nonblocking,
+		  __entry->for_kupdate, __entry->for_reclaim,
+		  __entry->for_writepages, __entry->range_cyclic)
+);
+
+TRACE_EVENT(ext4_da_writepages_result,
+	TP_PROTO(struct inode *inode, struct writeback_control *wbc,
+			int ret, int pages_written),
+
+	TP_ARGS(inode, wbc, ret, pages_written),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	int,	ret			)
+		__field(	int,	pages_written		)
+		__field(	long,	pages_skipped		)
+		__field(	char,	encountered_congestion	)
+		__field(	char,	more_io			)	
+		__field(	char,	no_nrwrite_index_update )
+	),
+
+	TP_fast_assign(
+		__entry->dev		= inode->i_sb->s_dev;
+		__entry->ino		= inode->i_ino;
+		__entry->ret		= ret;
+		__entry->pages_written	= pages_written;
+		__entry->pages_skipped	= wbc->pages_skipped;
+		__entry->encountered_congestion	= wbc->encountered_congestion;
+		__entry->more_io	= wbc->more_io;
+		__entry->no_nrwrite_index_update = wbc->no_nrwrite_index_update;
+	),
+
+	TP_printk("dev %s ino %lu ret %d pages_written %d pages_skipped %ld congestion %d more_io %d no_nrwrite_index_update %d",
+		  jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->ret,
+		  __entry->pages_written, __entry->pages_skipped,
+		  __entry->encountered_congestion, __entry->more_io,
+		  __entry->no_nrwrite_index_update)
+);
+
+TRACE_EVENT(ext4_da_write_begin,
+	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
+			unsigned int flags),
+
+	TP_ARGS(inode, pos, len, flags),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	loff_t,	pos			)
+		__field(	unsigned int, len		)
+		__field(	unsigned int, flags		)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->pos	= pos;
+		__entry->len	= len;
+		__entry->flags	= flags;
+	),
+
+	TP_printk("dev %s ino %lu pos %llu len %u flags %u",
+		  jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->pos, __entry->len,
+		  __entry->flags)
+);
+
+TRACE_EVENT(ext4_da_write_end,
+	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
+			unsigned int copied),
+
+	TP_ARGS(inode, pos, len, copied),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	loff_t,	pos			)
+		__field(	unsigned int, len		)
+		__field(	unsigned int, copied		)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->pos	= pos;
+		__entry->len	= len;
+		__entry->copied	= copied;
+	),
+
+	TP_printk("dev %s ino %lu pos %llu len %u copied %u",
+		  jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->pos, __entry->len,
+		  __entry->copied)
+);
+
+TRACE_EVENT(ext4_normal_writepage,
+	TP_PROTO(struct inode *inode, struct page *page),
+
+	TP_ARGS(inode, page),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	pgoff_t, index			)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->index	= page->index;
+	),
+
+	TP_printk("dev %s ino %lu page_index %lu",
+		  jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->index)
+);
+
+TRACE_EVENT(ext4_journalled_writepage,
+	TP_PROTO(struct inode *inode, struct page *page),
+
+	TP_ARGS(inode, page),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	pgoff_t, index			)
+
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->index	= page->index;
+	),
+
+	TP_printk("dev %s ino %lu page_index %lu",
+		  jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->index)
+);
+
+TRACE_EVENT(ext4_discard_blocks,
+	TP_PROTO(struct super_block *sb, unsigned long long blk,
+			unsigned long long count),
+
+	TP_ARGS(sb, blk, count),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	__u64,	blk			)
+		__field(	__u64,	count			)
+
+	),
+
+	TP_fast_assign(
+		__entry->dev	= sb->s_dev;
+		__entry->blk	= blk;
+		__entry->count	= count;
+	),
+
+	TP_printk("dev %s blk %llu count %llu",
+		  jbd2_dev_to_name(__entry->dev), __entry->blk, __entry->count)
+);
+
+TRACE_EVENT(ext4_mb_new_inode_pa,
+	TP_PROTO(struct ext4_allocation_context *ac,
+		 struct ext4_prealloc_space *pa),
+
+	TP_ARGS(ac, pa),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u64,	pa_pstart		)
+		__field(	__u32,	pa_len			)
+		__field(	__u64,	pa_lstart		)
+
+	),
+
+	TP_fast_assign(
+		__entry->dev		= ac->ac_sb->s_dev;
+		__entry->ino		= ac->ac_inode->i_ino;
+		__entry->pa_pstart	= pa->pa_pstart;
+		__entry->pa_len		= pa->pa_len;
+		__entry->pa_lstart	= pa->pa_lstart;
+	),
+
+	TP_printk("dev %s ino %lu pstart %llu len %u lstart %llu",
+		  jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->pa_pstart,
+		  __entry->pa_len, __entry->pa_lstart)
+);
+
+TRACE_EVENT(ext4_mb_new_group_pa,
+	TP_PROTO(struct ext4_allocation_context *ac,
+		 struct ext4_prealloc_space *pa),
+
+	TP_ARGS(ac, pa),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u64,	pa_pstart		)
+		__field(	__u32,	pa_len			)
+		__field(	__u64,	pa_lstart		)
+
+	),
+
+	TP_fast_assign(
+		__entry->dev		= ac->ac_sb->s_dev;
+		__entry->ino		= ac->ac_inode->i_ino;
+		__entry->pa_pstart	= pa->pa_pstart;
+		__entry->pa_len		= pa->pa_len;
+		__entry->pa_lstart	= pa->pa_lstart;
+	),
+
+	TP_printk("dev %s ino %lu pstart %llu len %u lstart %llu",
+		  jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->pa_pstart,
+		  __entry->pa_len, __entry->pa_lstart)
+);
+
+TRACE_EVENT(ext4_mb_release_inode_pa,
+	TP_PROTO(struct ext4_allocation_context *ac,
+		 struct ext4_prealloc_space *pa,
+		 unsigned long long block, unsigned int count),
+
+	TP_ARGS(ac, pa, block, count),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u64,	block			)
+		__field(	__u32,	count			)
+
+	),
+
+	TP_fast_assign(
+		__entry->dev		= ac->ac_sb->s_dev;
+		__entry->ino		= ac->ac_inode->i_ino;
+		__entry->block		= block;
+		__entry->count		= count;
+	),
+
+	TP_printk("dev %s ino %lu block %llu count %u",
+		  jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->block,
+		  __entry->count)
+);
+
+TRACE_EVENT(ext4_mb_release_group_pa,
+	TP_PROTO(struct ext4_allocation_context *ac,
+		 struct ext4_prealloc_space *pa),
+
+	TP_ARGS(ac, pa),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u64,	pa_pstart		)
+		__field(	__u32,	pa_len			)
+
+	),
+
+	TP_fast_assign(
+		__entry->dev		= ac->ac_sb->s_dev;
+		__entry->ino		= ac->ac_inode->i_ino;
+		__entry->pa_pstart	= pa->pa_pstart;
+		__entry->pa_len		= pa->pa_len;
+	),
+
+	TP_printk("dev %s pstart %llu len %u",
+		  jbd2_dev_to_name(__entry->dev), __entry->pa_pstart, __entry->pa_len)
+);
+
+TRACE_EVENT(ext4_discard_preallocations,
+	TP_PROTO(struct inode *inode),
+
+	TP_ARGS(inode),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+	),
+
+	TP_printk("dev %s ino %lu",
+		  jbd2_dev_to_name(__entry->dev), __entry->ino)
+);
+
+TRACE_EVENT(ext4_mb_discard_preallocations,
+	TP_PROTO(struct super_block *sb, int needed),
+
+	TP_ARGS(sb, needed),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	int,	needed			)
+
+	),
+
+	TP_fast_assign(
+		__entry->dev	= sb->s_dev;
+		__entry->needed	= needed;
+	),
+
+	TP_printk("dev %s needed %d",
+		  jbd2_dev_to_name(__entry->dev), __entry->needed)
+);
+
+TRACE_EVENT(ext4_request_blocks,
+	TP_PROTO(struct ext4_allocation_request *ar),
+
+	TP_ARGS(ar),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	unsigned int, flags		)
+		__field(	unsigned int, len		)
+		__field(	__u64,  logical			)
+		__field(	__u64,	goal			)
+		__field(	__u64,	lleft			)
+		__field(	__u64,	lright			)
+		__field(	__u64,	pleft			)
+		__field(	__u64,	pright			)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= ar->inode->i_sb->s_dev;
+		__entry->ino	= ar->inode->i_ino;
+		__entry->flags	= ar->flags;
+		__entry->len	= ar->len;
+		__entry->logical = ar->logical;
+		__entry->goal	= ar->goal;
+		__entry->lleft	= ar->lleft;
+		__entry->lright	= ar->lright;
+		__entry->pleft	= ar->pleft;
+		__entry->pright	= ar->pright;
+	),
+
+	TP_printk("dev %s ino %lu flags %u len %u lblk %llu goal %llu lleft %llu lright %llu pleft %llu pright %llu ",
+		  jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->flags,
+		  __entry->len,
+		  (unsigned long long) __entry->logical,
+		  (unsigned long long) __entry->goal,
+		  (unsigned long long) __entry->lleft,
+		  (unsigned long long) __entry->lright,
+		  (unsigned long long) __entry->pleft,
+		  (unsigned long long) __entry->pright)
+);
+
+TRACE_EVENT(ext4_allocate_blocks,
+	TP_PROTO(struct ext4_allocation_request *ar, unsigned long long block),
+
+	TP_ARGS(ar, block),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u64,	block			)
+		__field(	unsigned int, flags		)
+		__field(	unsigned int, len		)
+		__field(	__u64,  logical			)
+		__field(	__u64,	goal			)
+		__field(	__u64,	lleft			)
+		__field(	__u64,	lright			)
+		__field(	__u64,	pleft			)
+		__field(	__u64,	pright			)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= ar->inode->i_sb->s_dev;
+		__entry->ino	= ar->inode->i_ino;
+		__entry->block	= block;
+		__entry->flags	= ar->flags;
+		__entry->len	= ar->len;
+		__entry->logical = ar->logical;
+		__entry->goal	= ar->goal;
+		__entry->lleft	= ar->lleft;
+		__entry->lright	= ar->lright;
+		__entry->pleft	= ar->pleft;
+		__entry->pright	= ar->pright;
+	),
+
+	TP_printk("dev %s ino %lu flags %u len %u block %llu lblk %llu goal %llu lleft %llu lright %llu pleft %llu pright %llu ",
+		  jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->flags,
+		  __entry->len, __entry->block,
+		  (unsigned long long) __entry->logical,
+		  (unsigned long long) __entry->goal,
+		  (unsigned long long) __entry->lleft,
+		  (unsigned long long) __entry->lright,
+		  (unsigned long long) __entry->pleft,
+		  (unsigned long long) __entry->pright)
+);
+
+TRACE_EVENT(ext4_free_blocks,
+	TP_PROTO(struct inode *inode, __u64 block, unsigned long count,
+			int metadata),
+
+	TP_ARGS(inode, block, count, metadata),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u64,	block			)
+		__field(	unsigned long,	count		)
+		__field(	int,	metadata		)
+
+	),
+
+	TP_fast_assign(
+		__entry->dev		= inode->i_sb->s_dev;
+		__entry->ino		= inode->i_ino;
+		__entry->block		= block;
+		__entry->count		= count;
+		__entry->metadata	= metadata;
+	),
+
+	TP_printk("dev %s ino %lu block %llu count %lu metadata %d",
+		  jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->block,
+		  __entry->count, __entry->metadata)
+);
+
+TRACE_EVENT(ext4_sync_file,
+	TP_PROTO(struct file *file, struct dentry *dentry, int datasync),
+
+	TP_ARGS(file, dentry, datasync),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	ino_t,	parent			)
+		__field(	int,	datasync		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= dentry->d_inode->i_sb->s_dev;
+		__entry->ino		= dentry->d_inode->i_ino;
+		__entry->datasync	= datasync;
+		__entry->parent		= dentry->d_parent->d_inode->i_ino;
+	),
+
+	TP_printk("dev %s ino %ld parent %ld datasync %d ",
+		  jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->parent,
+		  __entry->datasync)
+);
+
+TRACE_EVENT(ext4_sync_fs,
+	TP_PROTO(struct super_block *sb, int wait),
+
+	TP_ARGS(sb, wait),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	int,	wait			)
+
+	),
+
+	TP_fast_assign(
+		__entry->dev	= sb->s_dev;
+		__entry->wait	= wait;
+	),
+
+	TP_printk("dev %s wait %d", jbd2_dev_to_name(__entry->dev),
+		  __entry->wait)
+);
+
+#endif /* _TRACE_EXT4_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/jbd2.h b/include/trace/events/jbd2.h
new file mode 100644
index 00000000000..845b0b4b48f
--- /dev/null
+++ b/include/trace/events/jbd2.h
@@ -0,0 +1,168 @@
+#if !defined(_TRACE_JBD2_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_JBD2_H
+
+#include <linux/jbd2.h>
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM jbd2
+
+TRACE_EVENT(jbd2_checkpoint,
+
+	TP_PROTO(journal_t *journal, int result),
+
+	TP_ARGS(journal, result),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	int,	result			)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= journal->j_fs_dev->bd_dev;
+		__entry->result		= result;
+	),
+
+	TP_printk("dev %s result %d",
+		  jbd2_dev_to_name(__entry->dev), __entry->result)
+);
+
+TRACE_EVENT(jbd2_start_commit,
+
+	TP_PROTO(journal_t *journal, transaction_t *commit_transaction),
+
+	TP_ARGS(journal, commit_transaction),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	char,	sync_commit		  )
+		__field(	int,	transaction		  )
+	),
+
+	TP_fast_assign(
+		__entry->dev		= journal->j_fs_dev->bd_dev;
+		__entry->sync_commit = commit_transaction->t_synchronous_commit;
+		__entry->transaction	= commit_transaction->t_tid;
+	),
+
+	TP_printk("dev %s transaction %d sync %d",
+		  jbd2_dev_to_name(__entry->dev), __entry->transaction,
+		  __entry->sync_commit)
+);
+
+TRACE_EVENT(jbd2_commit_locking,
+
+	TP_PROTO(journal_t *journal, transaction_t *commit_transaction),
+
+	TP_ARGS(journal, commit_transaction),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	char,	sync_commit		  )
+		__field(	int,	transaction		  )
+	),
+
+	TP_fast_assign(
+		__entry->dev		= journal->j_fs_dev->bd_dev;
+		__entry->sync_commit = commit_transaction->t_synchronous_commit;
+		__entry->transaction	= commit_transaction->t_tid;
+	),
+
+	TP_printk("dev %s transaction %d sync %d",
+		  jbd2_dev_to_name(__entry->dev), __entry->transaction,
+		  __entry->sync_commit)
+);
+
+TRACE_EVENT(jbd2_commit_flushing,
+
+	TP_PROTO(journal_t *journal, transaction_t *commit_transaction),
+
+	TP_ARGS(journal, commit_transaction),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	char,	sync_commit		  )
+		__field(	int,	transaction		  )
+	),
+
+	TP_fast_assign(
+		__entry->dev		= journal->j_fs_dev->bd_dev;
+		__entry->sync_commit = commit_transaction->t_synchronous_commit;
+		__entry->transaction	= commit_transaction->t_tid;
+	),
+
+	TP_printk("dev %s transaction %d sync %d",
+		  jbd2_dev_to_name(__entry->dev), __entry->transaction,
+		  __entry->sync_commit)
+);
+
+TRACE_EVENT(jbd2_commit_logging,
+
+	TP_PROTO(journal_t *journal, transaction_t *commit_transaction),
+
+	TP_ARGS(journal, commit_transaction),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	char,	sync_commit		  )
+		__field(	int,	transaction		  )
+	),
+
+	TP_fast_assign(
+		__entry->dev		= journal->j_fs_dev->bd_dev;
+		__entry->sync_commit = commit_transaction->t_synchronous_commit;
+		__entry->transaction	= commit_transaction->t_tid;
+	),
+
+	TP_printk("dev %s transaction %d sync %d",
+		  jbd2_dev_to_name(__entry->dev), __entry->transaction,
+		  __entry->sync_commit)
+);
+
+TRACE_EVENT(jbd2_end_commit,
+	TP_PROTO(journal_t *journal, transaction_t *commit_transaction),
+
+	TP_ARGS(journal, commit_transaction),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	char,	sync_commit		  )
+		__field(	int,	transaction		  )
+		__field(	int,	head		  	  )
+	),
+
+	TP_fast_assign(
+		__entry->dev		= journal->j_fs_dev->bd_dev;
+		__entry->sync_commit = commit_transaction->t_synchronous_commit;
+		__entry->transaction	= commit_transaction->t_tid;
+		__entry->head		= journal->j_tail_sequence;
+	),
+
+	TP_printk("dev %s transaction %d sync %d head %d",
+		  jbd2_dev_to_name(__entry->dev), __entry->transaction,
+		  __entry->sync_commit, __entry->head)
+);
+
+TRACE_EVENT(jbd2_submit_inode_data,
+	TP_PROTO(struct inode *inode),
+
+	TP_ARGS(inode),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+	),
+
+	TP_printk("dev %s ino %lu",
+		  jbd2_dev_to_name(__entry->dev), __entry->ino)
+);
+
+#endif /* _TRACE_JBD2_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/init/Kconfig b/init/Kconfig
index c4b3c6d51a7..1ce05a4cb5f 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -16,6 +16,11 @@ config DEFCONFIG_LIST
 	default "$ARCH_DEFCONFIG"
 	default "arch/$ARCH/defconfig"
 
+config CONSTRUCTORS
+	bool
+	depends on !UML
+	default y
+
 menu "General setup"
 
 config EXPERIMENTAL
diff --git a/init/main.c b/init/main.c
index 0e7aedeaa05..4870dfeb9ee 100644
--- a/init/main.c
+++ b/init/main.c
@@ -642,6 +642,10 @@ asmlinkage void __init start_kernel(void)
 				 "enabled early\n");
 	early_boot_irqs_on();
 	local_irq_enable();
+
+	/* Interrupts are enabled now so all GFP allocations are safe. */
+	set_gfp_allowed_mask(__GFP_BITS_MASK);
+
 	kmem_cache_init_late();
 
 	/*
@@ -674,7 +678,6 @@ asmlinkage void __init start_kernel(void)
 #endif
 	page_cgroup_init();
 	enable_debug_pagealloc();
-	cpu_hotplug_init();
 	kmemtrace_init();
 	kmemleak_init();
 	debug_objects_mem_init();
@@ -720,6 +723,17 @@ asmlinkage void __init start_kernel(void)
 	rest_init();
 }
 
+/* Call all constructor functions linked into the kernel. */
+static void __init do_ctors(void)
+{
+#ifdef CONFIG_CONSTRUCTORS
+	ctor_fn_t *call = (ctor_fn_t *) __ctors_start;
+
+	for (; call < (ctor_fn_t *) __ctors_end; call++)
+		(*call)();
+#endif
+}
+
 int initcall_debug;
 core_param(initcall_debug, initcall_debug, bool, 0644);
 
@@ -800,6 +814,7 @@ static void __init do_basic_setup(void)
 	usermodehelper_init();
 	driver_init();
 	init_irq_proc();
+	do_ctors();
 	do_initcalls();
 }
 
diff --git a/ipc/namespace.c b/ipc/namespace.c
index 4a5e752a927..a1094ff0bef 100644
--- a/ipc/namespace.c
+++ b/ipc/namespace.c
@@ -14,7 +14,7 @@
 
 #include "util.h"
 
-static struct ipc_namespace *clone_ipc_ns(struct ipc_namespace *old_ns)
+static struct ipc_namespace *create_ipc_ns(void)
 {
 	struct ipc_namespace *ns;
 	int err;
@@ -48,18 +48,9 @@ static struct ipc_namespace *clone_ipc_ns(struct ipc_namespace *old_ns)
 
 struct ipc_namespace *copy_ipcs(unsigned long flags, struct ipc_namespace *ns)
 {
-	struct ipc_namespace *new_ns;
-
-	BUG_ON(!ns);
-	get_ipc_ns(ns);
-
 	if (!(flags & CLONE_NEWIPC))
-		return ns;
-
-	new_ns = clone_ipc_ns(ns);
-
-	put_ipc_ns(ns);
-	return new_ns;
+		return get_ipc_ns(ns);
+	return create_ipc_ns();
 }
 
 /*
@@ -92,6 +83,30 @@ void free_ipcs(struct ipc_namespace *ns, struct ipc_ids *ids,
 	up_write(&ids->rw_mutex);
 }
 
+static void free_ipc_ns(struct ipc_namespace *ns)
+{
+	/*
+	 * Unregistering the hotplug notifier at the beginning guarantees
+	 * that the ipc namespace won't be freed while we are inside the
+	 * callback routine. Since the blocking_notifier_chain_XXX routines
+	 * hold a rw lock on the notifier list, unregister_ipcns_notifier()
+	 * won't take the rw lock before blocking_notifier_call_chain() has
+	 * released the rd lock.
+	 */
+	unregister_ipcns_notifier(ns);
+	sem_exit_ns(ns);
+	msg_exit_ns(ns);
+	shm_exit_ns(ns);
+	kfree(ns);
+	atomic_dec(&nr_ipc_ns);
+
+	/*
+	 * Do the ipcns removal notification after decrementing nr_ipc_ns in
+	 * order to have a correct value when recomputing msgmni.
+	 */
+	ipcns_notify(IPCNS_REMOVED);
+}
+
 /*
  * put_ipc_ns - drop a reference to an ipc namespace.
  * @ns: the namespace to put
@@ -117,27 +132,3 @@ void put_ipc_ns(struct ipc_namespace *ns)
 		free_ipc_ns(ns);
 	}
 }
-
-void free_ipc_ns(struct ipc_namespace *ns)
-{
-	/*
-	 * Unregistering the hotplug notifier at the beginning guarantees
-	 * that the ipc namespace won't be freed while we are inside the
-	 * callback routine. Since the blocking_notifier_chain_XXX routines
-	 * hold a rw lock on the notifier list, unregister_ipcns_notifier()
-	 * won't take the rw lock before blocking_notifier_call_chain() has
-	 * released the rd lock.
-	 */
-	unregister_ipcns_notifier(ns);
-	sem_exit_ns(ns);
-	msg_exit_ns(ns);
-	shm_exit_ns(ns);
-	kfree(ns);
-	atomic_dec(&nr_ipc_ns);
-
-	/*
-	 * Do the ipcns removal notification after decrementing nr_ipc_ns in
-	 * order to have a correct value when recomputing msgmni.
-	 */
-	ipcns_notify(IPCNS_REMOVED);
-}
diff --git a/ipc/util.h b/ipc/util.h
index 1187332a89d..764b51a37a6 100644
--- a/ipc/util.h
+++ b/ipc/util.h
@@ -10,6 +10,7 @@
 #ifndef _IPC_UTIL_H
 #define _IPC_UTIL_H
 
+#include <linux/unistd.h>
 #include <linux/err.h>
 
 #define SEQ_MULTIPLIER	(IPCMNI)
@@ -128,7 +129,7 @@ void ipc_update_perm(struct ipc64_perm *in, struct kern_ipc_perm *out);
 struct kern_ipc_perm *ipcctl_pre_down(struct ipc_ids *ids, int id, int cmd,
 				      struct ipc64_perm *perm, int extra_perm);
 
-#if defined(__ia64__) || defined(__x86_64__) || defined(__hppa__) || defined(__XTENSA__)
+#ifndef __ARCH_WANT_IPC_PARSE_VERSION
   /* On IA-64, we always use the "64-bit version" of the IPC structures.  */ 
 # define ipc_parse_version(cmd)	IPC_64
 #else
@@ -171,5 +172,6 @@ static inline void ipc_unlock(struct kern_ipc_perm *perm)
 struct kern_ipc_perm *ipc_lock_check(struct ipc_ids *ids, int id);
 int ipcget(struct ipc_namespace *ns, struct ipc_ids *ids,
 			struct ipc_ops *ops, struct ipc_params *params);
-
+void free_ipcs(struct ipc_namespace *ns, struct ipc_ids *ids,
+		void (*free)(struct ipc_namespace *, struct kern_ipc_perm *));
 #endif
diff --git a/kernel/Makefile b/kernel/Makefile
index 9df4501cb92..0a32cb21ec9 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -71,6 +71,7 @@ obj-$(CONFIG_STOP_MACHINE) += stop_machine.o
 obj-$(CONFIG_KPROBES_SANITY_TEST) += test_kprobes.o
 obj-$(CONFIG_AUDIT) += audit.o auditfilter.o
 obj-$(CONFIG_AUDITSYSCALL) += auditsc.o
+obj-$(CONFIG_GCOV_KERNEL) += gcov/
 obj-$(CONFIG_AUDIT_TREE) += audit_tree.o
 obj-$(CONFIG_KPROBES) += kprobes.o
 obj-$(CONFIG_KGDB) += kgdb.o
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 3fb789f6df9..3737a682cdf 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -843,6 +843,11 @@ static int parse_cgroupfs_options(char *data,
 				     struct cgroup_sb_opts *opts)
 {
 	char *token, *o = data ?: "all";
+	unsigned long mask = (unsigned long)-1;
+
+#ifdef CONFIG_CPUSETS
+	mask = ~(1UL << cpuset_subsys_id);
+#endif
 
 	opts->subsys_bits = 0;
 	opts->flags = 0;
@@ -887,6 +892,15 @@ static int parse_cgroupfs_options(char *data,
 		}
 	}
 
+	/*
+	 * Option noprefix was introduced just for backward compatibility
+	 * with the old cpuset, so we allow noprefix only if mounting just
+	 * the cpuset subsystem.
+	 */
+	if (test_bit(ROOT_NOPREFIX, &opts->flags) &&
+	    (opts->subsys_bits & mask))
+		return -EINVAL;
+
 	/* We can't have an empty hierarchy */
 	if (!opts->subsys_bits)
 		return -EINVAL;
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 395b6974dc8..8ce10043e4a 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -34,14 +34,11 @@ static struct {
 	 * an ongoing cpu hotplug operation.
 	 */
 	int refcount;
-} cpu_hotplug;
-
-void __init cpu_hotplug_init(void)
-{
-	cpu_hotplug.active_writer = NULL;
-	mutex_init(&cpu_hotplug.lock);
-	cpu_hotplug.refcount = 0;
-}
+} cpu_hotplug = {
+	.active_writer = NULL,
+	.lock = __MUTEX_INITIALIZER(cpu_hotplug.lock),
+	.refcount = 0,
+};
 
 #ifdef CONFIG_HOTPLUG_CPU
 
diff --git a/kernel/exit.c b/kernel/exit.c
index b6c90b5ef50..628d41f0dd5 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -375,9 +375,8 @@ static void set_special_pids(struct pid *pid)
 }
 
 /*
- * Let kernel threads use this to say that they
- * allow a certain signal (since daemonize() will
- * have disabled all of them by default).
+ * Let kernel threads use this to say that they allow a certain signal.
+ * Must not be used if kthread was cloned with CLONE_SIGHAND.
  */
 int allow_signal(int sig)
 {
@@ -385,14 +384,14 @@ int allow_signal(int sig)
 		return -EINVAL;
 
 	spin_lock_irq(&current->sighand->siglock);
+	/* This is only needed for daemonize()'ed kthreads */
 	sigdelset(&current->blocked, sig);
-	if (!current->mm) {
-		/* Kernel threads handle their own signals.
-		   Let the signal code know it'll be handled, so
-		   that they don't get converted to SIGKILL or
-		   just silently dropped */
-		current->sighand->action[(sig)-1].sa.sa_handler = (void __user *)2;
-	}
+	/*
+	 * Kernel threads handle their own signals. Let the signal code
+	 * know it'll be handled, so that they don't get converted to
+	 * SIGKILL or just silently dropped.
+	 */
+	current->sighand->action[(sig)-1].sa.sa_handler = (void __user *)2;
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
 	return 0;
@@ -591,7 +590,7 @@ retry:
 	/*
 	 * Search in the siblings
 	 */
-	list_for_each_entry(c, &p->parent->children, sibling) {
+	list_for_each_entry(c, &p->real_parent->children, sibling) {
 		if (c->mm == mm)
 			goto assign_new_owner;
 	}
@@ -758,7 +757,7 @@ static void reparent_thread(struct task_struct *father, struct task_struct *p,
 	p->exit_signal = SIGCHLD;
 
 	/* If it has exited notify the new parent about this child's death. */
-	if (!p->ptrace &&
+	if (!task_ptrace(p) &&
 	    p->exit_state == EXIT_ZOMBIE && thread_group_empty(p)) {
 		do_notify_parent(p, p->exit_signal);
 		if (task_detached(p)) {
@@ -783,7 +782,7 @@ static void forget_original_parent(struct task_struct *father)
 	list_for_each_entry_safe(p, n, &father->children, sibling) {
 		p->real_parent = reaper;
 		if (p->parent == father) {
-			BUG_ON(p->ptrace);
+			BUG_ON(task_ptrace(p));
 			p->parent = p->real_parent;
 		}
 		reparent_thread(father, p, &dead_children);
@@ -1081,6 +1080,18 @@ SYSCALL_DEFINE1(exit_group, int, error_code)
 	return 0;
 }
 
+struct wait_opts {
+	enum pid_type		wo_type;
+	int			wo_flags;
+	struct pid		*wo_pid;
+
+	struct siginfo __user	*wo_info;
+	int __user		*wo_stat;
+	struct rusage __user	*wo_rusage;
+
+	int			notask_error;
+};
+
 static struct pid *task_pid_type(struct task_struct *task, enum pid_type type)
 {
 	struct pid *pid = NULL;
@@ -1091,13 +1102,12 @@ static struct pid *task_pid_type(struct task_struct *task, enum pid_type type)
 	return pid;
 }
 
-static int eligible_child(enum pid_type type, struct pid *pid, int options,
-			  struct task_struct *p)
+static int eligible_child(struct wait_opts *wo, struct task_struct *p)
 {
 	int err;
 
-	if (type < PIDTYPE_MAX) {
-		if (task_pid_type(p, type) != pid)
+	if (wo->wo_type < PIDTYPE_MAX) {
+		if (task_pid_type(p, wo->wo_type) != wo->wo_pid)
 			return 0;
 	}
 
@@ -1106,8 +1116,8 @@ static int eligible_child(enum pid_type type, struct pid *pid, int options,
 	 * set; otherwise, wait for non-clone children *only*.  (Note:
 	 * A "clone" child here is one that reports to its parent
 	 * using a signal other than SIGCHLD.) */
-	if (((p->exit_signal != SIGCHLD) ^ ((options & __WCLONE) != 0))
-	    && !(options & __WALL))
+	if (((p->exit_signal != SIGCHLD) ^ !!(wo->wo_flags & __WCLONE))
+	    && !(wo->wo_flags & __WALL))
 		return 0;
 
 	err = security_task_wait(p);
@@ -1117,14 +1127,15 @@ static int eligible_child(enum pid_type type, struct pid *pid, int options,
 	return 1;
 }
 
-static int wait_noreap_copyout(struct task_struct *p, pid_t pid, uid_t uid,
-			       int why, int status,
-			       struct siginfo __user *infop,
-			       struct rusage __user *rusagep)
+static int wait_noreap_copyout(struct wait_opts *wo, struct task_struct *p,
+				pid_t pid, uid_t uid, int why, int status)
 {
-	int retval = rusagep ? getrusage(p, RUSAGE_BOTH, rusagep) : 0;
+	struct siginfo __user *infop;
+	int retval = wo->wo_rusage
+		? getrusage(p, RUSAGE_BOTH, wo->wo_rusage) : 0;
 
 	put_task_struct(p);
+	infop = wo->wo_info;
 	if (!retval)
 		retval = put_user(SIGCHLD, &infop->si_signo);
 	if (!retval)
@@ -1148,19 +1159,18 @@ static int wait_noreap_copyout(struct task_struct *p, pid_t pid, uid_t uid,
  * the lock and this task is uninteresting.  If we return nonzero, we have
  * released the lock and the system call should return.
  */
-static int wait_task_zombie(struct task_struct *p, int options,
-			    struct siginfo __user *infop,
-			    int __user *stat_addr, struct rusage __user *ru)
+static int wait_task_zombie(struct wait_opts *wo, struct task_struct *p)
 {
 	unsigned long state;
 	int retval, status, traced;
 	pid_t pid = task_pid_vnr(p);
 	uid_t uid = __task_cred(p)->uid;
+	struct siginfo __user *infop;
 
-	if (!likely(options & WEXITED))
+	if (!likely(wo->wo_flags & WEXITED))
 		return 0;
 
-	if (unlikely(options & WNOWAIT)) {
+	if (unlikely(wo->wo_flags & WNOWAIT)) {
 		int exit_code = p->exit_code;
 		int why, status;
 
@@ -1173,8 +1183,7 @@ static int wait_task_zombie(struct task_struct *p, int options,
 			why = (exit_code & 0x80) ? CLD_DUMPED : CLD_KILLED;
 			status = exit_code & 0x7f;
 		}
-		return wait_noreap_copyout(p, pid, uid, why,
-					   status, infop, ru);
+		return wait_noreap_copyout(wo, p, pid, uid, why, status);
 	}
 
 	/*
@@ -1188,11 +1197,13 @@ static int wait_task_zombie(struct task_struct *p, int options,
 	}
 
 	traced = ptrace_reparented(p);
-
-	if (likely(!traced)) {
+	/*
+	 * It can be ptraced but not reparented, check
+	 * !task_detached() to filter out sub-threads.
+	 */
+	if (likely(!traced) && likely(!task_detached(p))) {
 		struct signal_struct *psig;
 		struct signal_struct *sig;
-		struct task_cputime cputime;
 
 		/*
 		 * The resource counters for the group leader are in its
@@ -1205,26 +1216,23 @@ static int wait_task_zombie(struct task_struct *p, int options,
 		 * p->signal fields, because they are only touched by
 		 * __exit_signal, which runs with tasklist_lock
 		 * write-locked anyway, and so is excluded here.  We do
-		 * need to protect the access to p->parent->signal fields,
+		 * need to protect the access to parent->signal fields,
 		 * as other threads in the parent group can be right
 		 * here reaping other children at the same time.
-		 *
-		 * We use thread_group_cputime() to get times for the thread
-		 * group, which consolidates times for all threads in the
-		 * group including the group leader.
 		 */
-		thread_group_cputime(p, &cputime);
-		spin_lock_irq(&p->parent->sighand->siglock);
-		psig = p->parent->signal;
+		spin_lock_irq(&p->real_parent->sighand->siglock);
+		psig = p->real_parent->signal;
 		sig = p->signal;
 		psig->cutime =
 			cputime_add(psig->cutime,
-			cputime_add(cputime.utime,
-				    sig->cutime));
+			cputime_add(p->utime,
+			cputime_add(sig->utime,
+				    sig->cutime)));
 		psig->cstime =
 			cputime_add(psig->cstime,
-			cputime_add(cputime.stime,
-				    sig->cstime));
+			cputime_add(p->stime,
+			cputime_add(sig->stime,
+				    sig->cstime)));
 		psig->cgtime =
 			cputime_add(psig->cgtime,
 			cputime_add(p->gtime,
@@ -1246,7 +1254,7 @@ static int wait_task_zombie(struct task_struct *p, int options,
 			sig->oublock + sig->coublock;
 		task_io_accounting_add(&psig->ioac, &p->ioac);
 		task_io_accounting_add(&psig->ioac, &sig->ioac);
-		spin_unlock_irq(&p->parent->sighand->siglock);
+		spin_unlock_irq(&p->real_parent->sighand->siglock);
 	}
 
 	/*
@@ -1255,11 +1263,14 @@ static int wait_task_zombie(struct task_struct *p, int options,
 	 */
 	read_unlock(&tasklist_lock);
 
-	retval = ru ? getrusage(p, RUSAGE_BOTH, ru) : 0;
+	retval = wo->wo_rusage
+		? getrusage(p, RUSAGE_BOTH, wo->wo_rusage) : 0;
 	status = (p->signal->flags & SIGNAL_GROUP_EXIT)
 		? p->signal->group_exit_code : p->exit_code;
-	if (!retval && stat_addr)
-		retval = put_user(status, stat_addr);
+	if (!retval && wo->wo_stat)
+		retval = put_user(status, wo->wo_stat);
+
+	infop = wo->wo_info;
 	if (!retval && infop)
 		retval = put_user(SIGCHLD, &infop->si_signo);
 	if (!retval && infop)
@@ -1327,15 +1338,18 @@ static int *task_stopped_code(struct task_struct *p, bool ptrace)
  * the lock and this task is uninteresting.  If we return nonzero, we have
  * released the lock and the system call should return.
  */
-static int wait_task_stopped(int ptrace, struct task_struct *p,
-			     int options, struct siginfo __user *infop,
-			     int __user *stat_addr, struct rusage __user *ru)
+static int wait_task_stopped(struct wait_opts *wo,
+				int ptrace, struct task_struct *p)
 {
+	struct siginfo __user *infop;
 	int retval, exit_code, *p_code, why;
 	uid_t uid = 0; /* unneeded, required by compiler */
 	pid_t pid;
 
-	if (!(options & WUNTRACED))
+	/*
+	 * Traditionally we see ptrace'd stopped tasks regardless of options.
+	 */
+	if (!ptrace && !(wo->wo_flags & WUNTRACED))
 		return 0;
 
 	exit_code = 0;
@@ -1349,7 +1363,7 @@ static int wait_task_stopped(int ptrace, struct task_struct *p,
 	if (!exit_code)
 		goto unlock_sig;
 
-	if (!unlikely(options & WNOWAIT))
+	if (!unlikely(wo->wo_flags & WNOWAIT))
 		*p_code = 0;
 
 	/* don't need the RCU readlock here as we're holding a spinlock */
@@ -1371,14 +1385,15 @@ unlock_sig:
 	why = ptrace ? CLD_TRAPPED : CLD_STOPPED;
 	read_unlock(&tasklist_lock);
 
-	if (unlikely(options & WNOWAIT))
-		return wait_noreap_copyout(p, pid, uid,
-					   why, exit_code,
-					   infop, ru);
+	if (unlikely(wo->wo_flags & WNOWAIT))
+		return wait_noreap_copyout(wo, p, pid, uid, why, exit_code);
 
-	retval = ru ? getrusage(p, RUSAGE_BOTH, ru) : 0;
-	if (!retval && stat_addr)
-		retval = put_user((exit_code << 8) | 0x7f, stat_addr);
+	retval = wo->wo_rusage
+		? getrusage(p, RUSAGE_BOTH, wo->wo_rusage) : 0;
+	if (!retval && wo->wo_stat)
+		retval = put_user((exit_code << 8) | 0x7f, wo->wo_stat);
+
+	infop = wo->wo_info;
 	if (!retval && infop)
 		retval = put_user(SIGCHLD, &infop->si_signo);
 	if (!retval && infop)
@@ -1405,15 +1420,13 @@ unlock_sig:
  * the lock and this task is uninteresting.  If we return nonzero, we have
  * released the lock and the system call should return.
  */
-static int wait_task_continued(struct task_struct *p, int options,
-			       struct siginfo __user *infop,
-			       int __user *stat_addr, struct rusage __user *ru)
+static int wait_task_continued(struct wait_opts *wo, struct task_struct *p)
 {
 	int retval;
 	pid_t pid;
 	uid_t uid;
 
-	if (!unlikely(options & WCONTINUED))
+	if (!unlikely(wo->wo_flags & WCONTINUED))
 		return 0;
 
 	if (!(p->signal->flags & SIGNAL_STOP_CONTINUED))
@@ -1425,7 +1438,7 @@ static int wait_task_continued(struct task_struct *p, int options,
 		spin_unlock_irq(&p->sighand->siglock);
 		return 0;
 	}
-	if (!unlikely(options & WNOWAIT))
+	if (!unlikely(wo->wo_flags & WNOWAIT))
 		p->signal->flags &= ~SIGNAL_STOP_CONTINUED;
 	uid = __task_cred(p)->uid;
 	spin_unlock_irq(&p->sighand->siglock);
@@ -1434,17 +1447,17 @@ static int wait_task_continued(struct task_struct *p, int options,
 	get_task_struct(p);
 	read_unlock(&tasklist_lock);
 
-	if (!infop) {
-		retval = ru ? getrusage(p, RUSAGE_BOTH, ru) : 0;
+	if (!wo->wo_info) {
+		retval = wo->wo_rusage
+			? getrusage(p, RUSAGE_BOTH, wo->wo_rusage) : 0;
 		put_task_struct(p);
-		if (!retval && stat_addr)
-			retval = put_user(0xffff, stat_addr);
+		if (!retval && wo->wo_stat)
+			retval = put_user(0xffff, wo->wo_stat);
 		if (!retval)
 			retval = pid;
 	} else {
-		retval = wait_noreap_copyout(p, pid, uid,
-					     CLD_CONTINUED, SIGCONT,
-					     infop, ru);
+		retval = wait_noreap_copyout(wo, p, pid, uid,
+					     CLD_CONTINUED, SIGCONT);
 		BUG_ON(retval == 0);
 	}
 
@@ -1454,19 +1467,16 @@ static int wait_task_continued(struct task_struct *p, int options,
 /*
  * Consider @p for a wait by @parent.
  *
- * -ECHILD should be in *@notask_error before the first call.
+ * -ECHILD should be in ->notask_error before the first call.
  * Returns nonzero for a final return, when we have unlocked tasklist_lock.
  * Returns zero if the search for a child should continue;
- * then *@notask_error is 0 if @p is an eligible child,
+ * then ->notask_error is 0 if @p is an eligible child,
  * or another error from security_task_wait(), or still -ECHILD.
  */
-static int wait_consider_task(struct task_struct *parent, int ptrace,
-			      struct task_struct *p, int *notask_error,
-			      enum pid_type type, struct pid *pid, int options,
-			      struct siginfo __user *infop,
-			      int __user *stat_addr, struct rusage __user *ru)
+static int wait_consider_task(struct wait_opts *wo, struct task_struct *parent,
+				int ptrace, struct task_struct *p)
 {
-	int ret = eligible_child(type, pid, options, p);
+	int ret = eligible_child(wo, p);
 	if (!ret)
 		return ret;
 
@@ -1478,17 +1488,17 @@ static int wait_consider_task(struct task_struct *parent, int ptrace,
 		 * to look for security policy problems, rather
 		 * than for mysterious wait bugs.
 		 */
-		if (*notask_error)
-			*notask_error = ret;
+		if (wo->notask_error)
+			wo->notask_error = ret;
 		return 0;
 	}
 
-	if (likely(!ptrace) && unlikely(p->ptrace)) {
+	if (likely(!ptrace) && unlikely(task_ptrace(p))) {
 		/*
 		 * This child is hidden by ptrace.
 		 * We aren't allowed to see it now, but eventually we will.
 		 */
-		*notask_error = 0;
+		wo->notask_error = 0;
 		return 0;
 	}
 
@@ -1499,34 +1509,30 @@ static int wait_consider_task(struct task_struct *parent, int ptrace,
 	 * We don't reap group leaders with subthreads.
 	 */
 	if (p->exit_state == EXIT_ZOMBIE && !delay_group_leader(p))
-		return wait_task_zombie(p, options, infop, stat_addr, ru);
+		return wait_task_zombie(wo, p);
 
 	/*
 	 * It's stopped or running now, so it might
 	 * later continue, exit, or stop again.
 	 */
-	*notask_error = 0;
+	wo->notask_error = 0;
 
 	if (task_stopped_code(p, ptrace))
-		return wait_task_stopped(ptrace, p, options,
-					 infop, stat_addr, ru);
+		return wait_task_stopped(wo, ptrace, p);
 
-	return wait_task_continued(p, options, infop, stat_addr, ru);
+	return wait_task_continued(wo, p);
 }
 
 /*
  * Do the work of do_wait() for one thread in the group, @tsk.
  *
- * -ECHILD should be in *@notask_error before the first call.
+ * -ECHILD should be in ->notask_error before the first call.
  * Returns nonzero for a final return, when we have unlocked tasklist_lock.
  * Returns zero if the search for a child should continue; then
- * *@notask_error is 0 if there were any eligible children,
+ * ->notask_error is 0 if there were any eligible children,
  * or another error from security_task_wait(), or still -ECHILD.
  */
-static int do_wait_thread(struct task_struct *tsk, int *notask_error,
-			  enum pid_type type, struct pid *pid, int options,
-			  struct siginfo __user *infop, int __user *stat_addr,
-			  struct rusage __user *ru)
+static int do_wait_thread(struct wait_opts *wo, struct task_struct *tsk)
 {
 	struct task_struct *p;
 
@@ -1535,9 +1541,7 @@ static int do_wait_thread(struct task_struct *tsk, int *notask_error,
 		 * Do not consider detached threads.
 		 */
 		if (!task_detached(p)) {
-			int ret = wait_consider_task(tsk, 0, p, notask_error,
-						     type, pid, options,
-						     infop, stat_addr, ru);
+			int ret = wait_consider_task(wo, tsk, 0, p);
 			if (ret)
 				return ret;
 		}
@@ -1546,22 +1550,12 @@ static int do_wait_thread(struct task_struct *tsk, int *notask_error,
 	return 0;
 }
 
-static int ptrace_do_wait(struct task_struct *tsk, int *notask_error,
-			  enum pid_type type, struct pid *pid, int options,
-			  struct siginfo __user *infop, int __user *stat_addr,
-			  struct rusage __user *ru)
+static int ptrace_do_wait(struct wait_opts *wo, struct task_struct *tsk)
 {
 	struct task_struct *p;
 
-	/*
-	 * Traditionally we see ptrace'd stopped tasks regardless of options.
-	 */
-	options |= WUNTRACED;
-
 	list_for_each_entry(p, &tsk->ptraced, ptrace_entry) {
-		int ret = wait_consider_task(tsk, 1, p, notask_error,
-					     type, pid, options,
-					     infop, stat_addr, ru);
+		int ret = wait_consider_task(wo, tsk, 1, p);
 		if (ret)
 			return ret;
 	}
@@ -1569,65 +1563,59 @@ static int ptrace_do_wait(struct task_struct *tsk, int *notask_error,
 	return 0;
 }
 
-static long do_wait(enum pid_type type, struct pid *pid, int options,
-		    struct siginfo __user *infop, int __user *stat_addr,
-		    struct rusage __user *ru)
+static long do_wait(struct wait_opts *wo)
 {
 	DECLARE_WAITQUEUE(wait, current);
 	struct task_struct *tsk;
 	int retval;
 
-	trace_sched_process_wait(pid);
+	trace_sched_process_wait(wo->wo_pid);
 
 	add_wait_queue(&current->signal->wait_chldexit,&wait);
 repeat:
 	/*
 	 * If there is nothing that can match our critiera just get out.
-	 * We will clear @retval to zero if we see any child that might later
-	 * match our criteria, even if we are not able to reap it yet.
+	 * We will clear ->notask_error to zero if we see any child that
+	 * might later match our criteria, even if we are not able to reap
+	 * it yet.
 	 */
-	retval = -ECHILD;
-	if ((type < PIDTYPE_MAX) && (!pid || hlist_empty(&pid->tasks[type])))
-		goto end;
+	wo->notask_error = -ECHILD;
+	if ((wo->wo_type < PIDTYPE_MAX) &&
+	   (!wo->wo_pid || hlist_empty(&wo->wo_pid->tasks[wo->wo_type])))
+		goto notask;
 
-	current->state = TASK_INTERRUPTIBLE;
+	set_current_state(TASK_INTERRUPTIBLE);
 	read_lock(&tasklist_lock);
 	tsk = current;
 	do {
-		int tsk_result = do_wait_thread(tsk, &retval,
-						type, pid, options,
-						infop, stat_addr, ru);
-		if (!tsk_result)
-			tsk_result = ptrace_do_wait(tsk, &retval,
-						    type, pid, options,
-						    infop, stat_addr, ru);
-		if (tsk_result) {
-			/*
-			 * tasklist_lock is unlocked and we have a final result.
-			 */
-			retval = tsk_result;
+		retval = do_wait_thread(wo, tsk);
+		if (retval)
+			goto end;
+
+		retval = ptrace_do_wait(wo, tsk);
+		if (retval)
 			goto end;
-		}
 
-		if (options & __WNOTHREAD)
+		if (wo->wo_flags & __WNOTHREAD)
 			break;
-		tsk = next_thread(tsk);
-		BUG_ON(tsk->signal != current->signal);
-	} while (tsk != current);
+	} while_each_thread(current, tsk);
 	read_unlock(&tasklist_lock);
 
-	if (!retval && !(options & WNOHANG)) {
+notask:
+	retval = wo->notask_error;
+	if (!retval && !(wo->wo_flags & WNOHANG)) {
 		retval = -ERESTARTSYS;
 		if (!signal_pending(current)) {
 			schedule();
 			goto repeat;
 		}
 	}
-
 end:
-	current->state = TASK_RUNNING;
+	__set_current_state(TASK_RUNNING);
 	remove_wait_queue(&current->signal->wait_chldexit,&wait);
-	if (infop) {
+	if (wo->wo_info) {
+		struct siginfo __user *infop = wo->wo_info;
+
 		if (retval > 0)
 			retval = 0;
 		else {
@@ -1656,6 +1644,7 @@ end:
 SYSCALL_DEFINE5(waitid, int, which, pid_t, upid, struct siginfo __user *,
 		infop, int, options, struct rusage __user *, ru)
 {
+	struct wait_opts wo;
 	struct pid *pid = NULL;
 	enum pid_type type;
 	long ret;
@@ -1685,7 +1674,14 @@ SYSCALL_DEFINE5(waitid, int, which, pid_t, upid, struct siginfo __user *,
 
 	if (type < PIDTYPE_MAX)
 		pid = find_get_pid(upid);
-	ret = do_wait(type, pid, options, infop, NULL, ru);
+
+	wo.wo_type	= type;
+	wo.wo_pid	= pid;
+	wo.wo_flags	= options;
+	wo.wo_info	= infop;
+	wo.wo_stat	= NULL;
+	wo.wo_rusage	= ru;
+	ret = do_wait(&wo);
 	put_pid(pid);
 
 	/* avoid REGPARM breakage on x86: */
@@ -1696,6 +1692,7 @@ SYSCALL_DEFINE5(waitid, int, which, pid_t, upid, struct siginfo __user *,
 SYSCALL_DEFINE4(wait4, pid_t, upid, int __user *, stat_addr,
 		int, options, struct rusage __user *, ru)
 {
+	struct wait_opts wo;
 	struct pid *pid = NULL;
 	enum pid_type type;
 	long ret;
@@ -1717,7 +1714,13 @@ SYSCALL_DEFINE4(wait4, pid_t, upid, int __user *, stat_addr,
 		pid = find_get_pid(upid);
 	}
 
-	ret = do_wait(type, pid, options | WEXITED, NULL, stat_addr, ru);
+	wo.wo_type	= type;
+	wo.wo_pid	= pid;
+	wo.wo_flags	= options | WEXITED;
+	wo.wo_info	= NULL;
+	wo.wo_stat	= stat_addr;
+	wo.wo_rusage	= ru;
+	ret = do_wait(&wo);
 	put_pid(pid);
 
 	/* avoid REGPARM breakage on x86: */
diff --git a/kernel/fork.c b/kernel/fork.c
index be022c200da..467746b3f0a 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1029,7 +1029,6 @@ static struct task_struct *copy_process(unsigned long clone_flags,
 	p->vfork_done = NULL;
 	spin_lock_init(&p->alloc_lock);
 
-	clear_tsk_thread_flag(p, TIF_SIGPENDING);
 	init_sigpending(&p->pending);
 
 	p->utime = cputime_zero;
diff --git a/kernel/gcov/Kconfig b/kernel/gcov/Kconfig
new file mode 100644
index 00000000000..22e9dcfaa3d
--- /dev/null
+++ b/kernel/gcov/Kconfig
@@ -0,0 +1,48 @@
+menu "GCOV-based kernel profiling"
+
+config GCOV_KERNEL
+	bool "Enable gcov-based kernel profiling"
+	depends on DEBUG_FS && CONSTRUCTORS
+	default n
+	---help---
+	This option enables gcov-based code profiling (e.g. for code coverage
+	measurements).
+
+	If unsure, say N.
+
+	Additionally specify CONFIG_GCOV_PROFILE_ALL=y to get profiling data
+	for the entire kernel. To enable profiling for specific files or
+	directories, add a line similar to the following to the respective
+	Makefile:
+
+	For a single file (e.g. main.o):
+	        GCOV_PROFILE_main.o := y
+
+	For all files in one directory:
+	        GCOV_PROFILE := y
+
+	To exclude files from being profiled even when CONFIG_GCOV_PROFILE_ALL
+	is specified, use:
+
+	        GCOV_PROFILE_main.o := n
+	and:
+	        GCOV_PROFILE := n
+
+	Note that the debugfs filesystem has to be mounted to access
+	profiling data.
+
+config GCOV_PROFILE_ALL
+	bool "Profile entire Kernel"
+	depends on GCOV_KERNEL
+	depends on S390 || X86
+	default n
+	---help---
+	This options activates profiling for the entire kernel.
+
+	If unsure, say N.
+
+	Note that a kernel compiled with profiling flags will be significantly
+	larger and run slower. Also be sure to exclude files from profiling
+	which are not linked to the kernel image to prevent linker errors.
+
+endmenu
diff --git a/kernel/gcov/Makefile b/kernel/gcov/Makefile
new file mode 100644
index 00000000000..3f761001d51
--- /dev/null
+++ b/kernel/gcov/Makefile
@@ -0,0 +1,3 @@
+EXTRA_CFLAGS := -DSRCTREE='"$(srctree)"' -DOBJTREE='"$(objtree)"'
+
+obj-$(CONFIG_GCOV_KERNEL) := base.o fs.o gcc_3_4.o
diff --git a/kernel/gcov/base.c b/kernel/gcov/base.c
new file mode 100644
index 00000000000..9b22d03cc58
--- /dev/null
+++ b/kernel/gcov/base.c
@@ -0,0 +1,148 @@
+/*
+ *  This code maintains a list of active profiling data structures.
+ *
+ *    Copyright IBM Corp. 2009
+ *    Author(s): Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
+ *
+ *    Uses gcc-internal data definitions.
+ *    Based on the gcov-kernel patch by:
+ *		 Hubertus Franke <frankeh@us.ibm.com>
+ *		 Nigel Hinds <nhinds@us.ibm.com>
+ *		 Rajan Ravindran <rajancr@us.ibm.com>
+ *		 Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
+ *		 Paul Larson
+ */
+
+#define pr_fmt(fmt)	"gcov: " fmt
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include "gcov.h"
+
+static struct gcov_info *gcov_info_head;
+static int gcov_events_enabled;
+static DEFINE_MUTEX(gcov_lock);
+
+/*
+ * __gcov_init is called by gcc-generated constructor code for each object
+ * file compiled with -fprofile-arcs.
+ */
+void __gcov_init(struct gcov_info *info)
+{
+	static unsigned int gcov_version;
+
+	mutex_lock(&gcov_lock);
+	if (gcov_version == 0) {
+		gcov_version = info->version;
+		/*
+		 * Printing gcc's version magic may prove useful for debugging
+		 * incompatibility reports.
+		 */
+		pr_info("version magic: 0x%x\n", gcov_version);
+	}
+	/*
+	 * Add new profiling data structure to list and inform event
+	 * listener.
+	 */
+	info->next = gcov_info_head;
+	gcov_info_head = info;
+	if (gcov_events_enabled)
+		gcov_event(GCOV_ADD, info);
+	mutex_unlock(&gcov_lock);
+}
+EXPORT_SYMBOL(__gcov_init);
+
+/*
+ * These functions may be referenced by gcc-generated profiling code but serve
+ * no function for kernel profiling.
+ */
+void __gcov_flush(void)
+{
+	/* Unused. */
+}
+EXPORT_SYMBOL(__gcov_flush);
+
+void __gcov_merge_add(gcov_type *counters, unsigned int n_counters)
+{
+	/* Unused. */
+}
+EXPORT_SYMBOL(__gcov_merge_add);
+
+void __gcov_merge_single(gcov_type *counters, unsigned int n_counters)
+{
+	/* Unused. */
+}
+EXPORT_SYMBOL(__gcov_merge_single);
+
+void __gcov_merge_delta(gcov_type *counters, unsigned int n_counters)
+{
+	/* Unused. */
+}
+EXPORT_SYMBOL(__gcov_merge_delta);
+
+/**
+ * gcov_enable_events - enable event reporting through gcov_event()
+ *
+ * Turn on reporting of profiling data load/unload-events through the
+ * gcov_event() callback. Also replay all previous events once. This function
+ * is needed because some events are potentially generated too early for the
+ * callback implementation to handle them initially.
+ */
+void gcov_enable_events(void)
+{
+	struct gcov_info *info;
+
+	mutex_lock(&gcov_lock);
+	gcov_events_enabled = 1;
+	/* Perform event callback for previously registered entries. */
+	for (info = gcov_info_head; info; info = info->next)
+		gcov_event(GCOV_ADD, info);
+	mutex_unlock(&gcov_lock);
+}
+
+#ifdef CONFIG_MODULES
+static inline int within(void *addr, void *start, unsigned long size)
+{
+	return ((addr >= start) && (addr < start + size));
+}
+
+/* Update list and generate events when modules are unloaded. */
+static int gcov_module_notifier(struct notifier_block *nb, unsigned long event,
+				void *data)
+{
+	struct module *mod = data;
+	struct gcov_info *info;
+	struct gcov_info *prev;
+
+	if (event != MODULE_STATE_GOING)
+		return NOTIFY_OK;
+	mutex_lock(&gcov_lock);
+	prev = NULL;
+	/* Remove entries located in module from linked list. */
+	for (info = gcov_info_head; info; info = info->next) {
+		if (within(info, mod->module_core, mod->core_size)) {
+			if (prev)
+				prev->next = info->next;
+			else
+				gcov_info_head = info->next;
+			if (gcov_events_enabled)
+				gcov_event(GCOV_REMOVE, info);
+		} else
+			prev = info;
+	}
+	mutex_unlock(&gcov_lock);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block gcov_nb = {
+	.notifier_call	= gcov_module_notifier,
+};
+
+static int __init gcov_init(void)
+{
+	return register_module_notifier(&gcov_nb);
+}
+device_initcall(gcov_init);
+#endif /* CONFIG_MODULES */
diff --git a/kernel/gcov/fs.c b/kernel/gcov/fs.c
new file mode 100644
index 00000000000..ef3c3f88a7a
--- /dev/null
+++ b/kernel/gcov/fs.c
@@ -0,0 +1,673 @@
+/*
+ *  This code exports profiling data as debugfs files to userspace.
+ *
+ *    Copyright IBM Corp. 2009
+ *    Author(s): Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
+ *
+ *    Uses gcc-internal data definitions.
+ *    Based on the gcov-kernel patch by:
+ *		 Hubertus Franke <frankeh@us.ibm.com>
+ *		 Nigel Hinds <nhinds@us.ibm.com>
+ *		 Rajan Ravindran <rajancr@us.ibm.com>
+ *		 Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
+ *		 Paul Larson
+ *		 Yi CDL Yang
+ */
+
+#define pr_fmt(fmt)	"gcov: " fmt
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/debugfs.h>
+#include <linux/fs.h>
+#include <linux/list.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/seq_file.h>
+#include "gcov.h"
+
+/**
+ * struct gcov_node - represents a debugfs entry
+ * @list: list head for child node list
+ * @children: child nodes
+ * @all: list head for list of all nodes
+ * @parent: parent node
+ * @info: associated profiling data structure if not a directory
+ * @ghost: when an object file containing profiling data is unloaded we keep a
+ *         copy of the profiling data here to allow collecting coverage data
+ *         for cleanup code. Such a node is called a "ghost".
+ * @dentry: main debugfs entry, either a directory or data file
+ * @links: associated symbolic links
+ * @name: data file basename
+ *
+ * struct gcov_node represents an entity within the gcov/ subdirectory
+ * of debugfs. There are directory and data file nodes. The latter represent
+ * the actual synthesized data file plus any associated symbolic links which
+ * are needed by the gcov tool to work correctly.
+ */
+struct gcov_node {
+	struct list_head list;
+	struct list_head children;
+	struct list_head all;
+	struct gcov_node *parent;
+	struct gcov_info *info;
+	struct gcov_info *ghost;
+	struct dentry *dentry;
+	struct dentry **links;
+	char name[0];
+};
+
+static const char objtree[] = OBJTREE;
+static const char srctree[] = SRCTREE;
+static struct gcov_node root_node;
+static struct dentry *reset_dentry;
+static LIST_HEAD(all_head);
+static DEFINE_MUTEX(node_lock);
+
+/* If non-zero, keep copies of profiling data for unloaded modules. */
+static int gcov_persist = 1;
+
+static int __init gcov_persist_setup(char *str)
+{
+	unsigned long val;
+
+	if (strict_strtoul(str, 0, &val)) {
+		pr_warning("invalid gcov_persist parameter '%s'\n", str);
+		return 0;
+	}
+	gcov_persist = val;
+	pr_info("setting gcov_persist to %d\n", gcov_persist);
+
+	return 1;
+}
+__setup("gcov_persist=", gcov_persist_setup);
+
+/*
+ * seq_file.start() implementation for gcov data files. Note that the
+ * gcov_iterator interface is designed to be more restrictive than seq_file
+ * (no start from arbitrary position, etc.), to simplify the iterator
+ * implementation.
+ */
+static void *gcov_seq_start(struct seq_file *seq, loff_t *pos)
+{
+	loff_t i;
+
+	gcov_iter_start(seq->private);
+	for (i = 0; i < *pos; i++) {
+		if (gcov_iter_next(seq->private))
+			return NULL;
+	}
+	return seq->private;
+}
+
+/* seq_file.next() implementation for gcov data files. */
+static void *gcov_seq_next(struct seq_file *seq, void *data, loff_t *pos)
+{
+	struct gcov_iterator *iter = data;
+
+	if (gcov_iter_next(iter))
+		return NULL;
+	(*pos)++;
+
+	return iter;
+}
+
+/* seq_file.show() implementation for gcov data files. */
+static int gcov_seq_show(struct seq_file *seq, void *data)
+{
+	struct gcov_iterator *iter = data;
+
+	if (gcov_iter_write(iter, seq))
+		return -EINVAL;
+	return 0;
+}
+
+static void gcov_seq_stop(struct seq_file *seq, void *data)
+{
+	/* Unused. */
+}
+
+static const struct seq_operations gcov_seq_ops = {
+	.start	= gcov_seq_start,
+	.next	= gcov_seq_next,
+	.show	= gcov_seq_show,
+	.stop	= gcov_seq_stop,
+};
+
+/*
+ * Return the profiling data set for a given node. This can either be the
+ * original profiling data structure or a duplicate (also called "ghost")
+ * in case the associated object file has been unloaded.
+ */
+static struct gcov_info *get_node_info(struct gcov_node *node)
+{
+	if (node->info)
+		return node->info;
+
+	return node->ghost;
+}
+
+/*
+ * open() implementation for gcov data files. Create a copy of the profiling
+ * data set and initialize the iterator and seq_file interface.
+ */
+static int gcov_seq_open(struct inode *inode, struct file *file)
+{
+	struct gcov_node *node = inode->i_private;
+	struct gcov_iterator *iter;
+	struct seq_file *seq;
+	struct gcov_info *info;
+	int rc = -ENOMEM;
+
+	mutex_lock(&node_lock);
+	/*
+	 * Read from a profiling data copy to minimize reference tracking
+	 * complexity and concurrent access.
+	 */
+	info = gcov_info_dup(get_node_info(node));
+	if (!info)
+		goto out_unlock;
+	iter = gcov_iter_new(info);
+	if (!iter)
+		goto err_free_info;
+	rc = seq_open(file, &gcov_seq_ops);
+	if (rc)
+		goto err_free_iter_info;
+	seq = file->private_data;
+	seq->private = iter;
+out_unlock:
+	mutex_unlock(&node_lock);
+	return rc;
+
+err_free_iter_info:
+	gcov_iter_free(iter);
+err_free_info:
+	gcov_info_free(info);
+	goto out_unlock;
+}
+
+/*
+ * release() implementation for gcov data files. Release resources allocated
+ * by open().
+ */
+static int gcov_seq_release(struct inode *inode, struct file *file)
+{
+	struct gcov_iterator *iter;
+	struct gcov_info *info;
+	struct seq_file *seq;
+
+	seq = file->private_data;
+	iter = seq->private;
+	info = gcov_iter_get_info(iter);
+	gcov_iter_free(iter);
+	gcov_info_free(info);
+	seq_release(inode, file);
+
+	return 0;
+}
+
+/*
+ * Find a node by the associated data file name. Needs to be called with
+ * node_lock held.
+ */
+static struct gcov_node *get_node_by_name(const char *name)
+{
+	struct gcov_node *node;
+	struct gcov_info *info;
+
+	list_for_each_entry(node, &all_head, all) {
+		info = get_node_info(node);
+		if (info && (strcmp(info->filename, name) == 0))
+			return node;
+	}
+
+	return NULL;
+}
+
+static void remove_node(struct gcov_node *node);
+
+/*
+ * write() implementation for gcov data files. Reset profiling data for the
+ * associated file. If the object file has been unloaded (i.e. this is
+ * a "ghost" node), remove the debug fs node as well.
+ */
+static ssize_t gcov_seq_write(struct file *file, const char __user *addr,
+			      size_t len, loff_t *pos)
+{
+	struct seq_file *seq;
+	struct gcov_info *info;
+	struct gcov_node *node;
+
+	seq = file->private_data;
+	info = gcov_iter_get_info(seq->private);
+	mutex_lock(&node_lock);
+	node = get_node_by_name(info->filename);
+	if (node) {
+		/* Reset counts or remove node for unloaded modules. */
+		if (node->ghost)
+			remove_node(node);
+		else
+			gcov_info_reset(node->info);
+	}
+	/* Reset counts for open file. */
+	gcov_info_reset(info);
+	mutex_unlock(&node_lock);
+
+	return len;
+}
+
+/*
+ * Given a string <path> representing a file path of format:
+ *   path/to/file.gcda
+ * construct and return a new string:
+ *   <dir/>path/to/file.<ext>
+ */
+static char *link_target(const char *dir, const char *path, const char *ext)
+{
+	char *target;
+	char *old_ext;
+	char *copy;
+
+	copy = kstrdup(path, GFP_KERNEL);
+	if (!copy)
+		return NULL;
+	old_ext = strrchr(copy, '.');
+	if (old_ext)
+		*old_ext = '\0';
+	if (dir)
+		target = kasprintf(GFP_KERNEL, "%s/%s.%s", dir, copy, ext);
+	else
+		target = kasprintf(GFP_KERNEL, "%s.%s", copy, ext);
+	kfree(copy);
+
+	return target;
+}
+
+/*
+ * Construct a string representing the symbolic link target for the given
+ * gcov data file name and link type. Depending on the link type and the
+ * location of the data file, the link target can either point to a
+ * subdirectory of srctree, objtree or in an external location.
+ */
+static char *get_link_target(const char *filename, const struct gcov_link *ext)
+{
+	const char *rel;
+	char *result;
+
+	if (strncmp(filename, objtree, strlen(objtree)) == 0) {
+		rel = filename + strlen(objtree) + 1;
+		if (ext->dir == SRC_TREE)
+			result = link_target(srctree, rel, ext->ext);
+		else
+			result = link_target(objtree, rel, ext->ext);
+	} else {
+		/* External compilation. */
+		result = link_target(NULL, filename, ext->ext);
+	}
+
+	return result;
+}
+
+#define SKEW_PREFIX	".tmp_"
+
+/*
+ * For a filename .tmp_filename.ext return filename.ext. Needed to compensate
+ * for filename skewing caused by the mod-versioning mechanism.
+ */
+static const char *deskew(const char *basename)
+{
+	if (strncmp(basename, SKEW_PREFIX, sizeof(SKEW_PREFIX) - 1) == 0)
+		return basename + sizeof(SKEW_PREFIX) - 1;
+	return basename;
+}
+
+/*
+ * Create links to additional files (usually .c and .gcno files) which the
+ * gcov tool expects to find in the same directory as the gcov data file.
+ */
+static void add_links(struct gcov_node *node, struct dentry *parent)
+{
+	char *basename;
+	char *target;
+	int num;
+	int i;
+
+	for (num = 0; gcov_link[num].ext; num++)
+		/* Nothing. */;
+	node->links = kcalloc(num, sizeof(struct dentry *), GFP_KERNEL);
+	if (!node->links)
+		return;
+	for (i = 0; i < num; i++) {
+		target = get_link_target(get_node_info(node)->filename,
+					 &gcov_link[i]);
+		if (!target)
+			goto out_err;
+		basename = strrchr(target, '/');
+		if (!basename)
+			goto out_err;
+		basename++;
+		node->links[i] = debugfs_create_symlink(deskew(basename),
+							parent,	target);
+		if (!node->links[i])
+			goto out_err;
+		kfree(target);
+	}
+
+	return;
+out_err:
+	kfree(target);
+	while (i-- > 0)
+		debugfs_remove(node->links[i]);
+	kfree(node->links);
+	node->links = NULL;
+}
+
+static const struct file_operations gcov_data_fops = {
+	.open		= gcov_seq_open,
+	.release	= gcov_seq_release,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.write		= gcov_seq_write,
+};
+
+/* Basic initialization of a new node. */
+static void init_node(struct gcov_node *node, struct gcov_info *info,
+		      const char *name, struct gcov_node *parent)
+{
+	INIT_LIST_HEAD(&node->list);
+	INIT_LIST_HEAD(&node->children);
+	INIT_LIST_HEAD(&node->all);
+	node->info = info;
+	node->parent = parent;
+	if (name)
+		strcpy(node->name, name);
+}
+
+/*
+ * Create a new node and associated debugfs entry. Needs to be called with
+ * node_lock held.
+ */
+static struct gcov_node *new_node(struct gcov_node *parent,
+				  struct gcov_info *info, const char *name)
+{
+	struct gcov_node *node;
+
+	node = kzalloc(sizeof(struct gcov_node) + strlen(name) + 1, GFP_KERNEL);
+	if (!node) {
+		pr_warning("out of memory\n");
+		return NULL;
+	}
+	init_node(node, info, name, parent);
+	/* Differentiate between gcov data file nodes and directory nodes. */
+	if (info) {
+		node->dentry = debugfs_create_file(deskew(node->name), 0600,
+					parent->dentry, node, &gcov_data_fops);
+	} else
+		node->dentry = debugfs_create_dir(node->name, parent->dentry);
+	if (!node->dentry) {
+		pr_warning("could not create file\n");
+		kfree(node);
+		return NULL;
+	}
+	if (info)
+		add_links(node, parent->dentry);
+	list_add(&node->list, &parent->children);
+	list_add(&node->all, &all_head);
+
+	return node;
+}
+
+/* Remove symbolic links associated with node. */
+static void remove_links(struct gcov_node *node)
+{
+	int i;
+
+	if (!node->links)
+		return;
+	for (i = 0; gcov_link[i].ext; i++)
+		debugfs_remove(node->links[i]);
+	kfree(node->links);
+	node->links = NULL;
+}
+
+/*
+ * Remove node from all lists and debugfs and release associated resources.
+ * Needs to be called with node_lock held.
+ */
+static void release_node(struct gcov_node *node)
+{
+	list_del(&node->list);
+	list_del(&node->all);
+	debugfs_remove(node->dentry);
+	remove_links(node);
+	if (node->ghost)
+		gcov_info_free(node->ghost);
+	kfree(node);
+}
+
+/* Release node and empty parents. Needs to be called with node_lock held. */
+static void remove_node(struct gcov_node *node)
+{
+	struct gcov_node *parent;
+
+	while ((node != &root_node) && list_empty(&node->children)) {
+		parent = node->parent;
+		release_node(node);
+		node = parent;
+	}
+}
+
+/*
+ * Find child node with given basename. Needs to be called with node_lock
+ * held.
+ */
+static struct gcov_node *get_child_by_name(struct gcov_node *parent,
+					   const char *name)
+{
+	struct gcov_node *node;
+
+	list_for_each_entry(node, &parent->children, list) {
+		if (strcmp(node->name, name) == 0)
+			return node;
+	}
+
+	return NULL;
+}
+
+/*
+ * write() implementation for reset file. Reset all profiling data to zero
+ * and remove ghost nodes.
+ */
+static ssize_t reset_write(struct file *file, const char __user *addr,
+			   size_t len, loff_t *pos)
+{
+	struct gcov_node *node;
+
+	mutex_lock(&node_lock);
+restart:
+	list_for_each_entry(node, &all_head, all) {
+		if (node->info)
+			gcov_info_reset(node->info);
+		else if (list_empty(&node->children)) {
+			remove_node(node);
+			/* Several nodes may have gone - restart loop. */
+			goto restart;
+		}
+	}
+	mutex_unlock(&node_lock);
+
+	return len;
+}
+
+/* read() implementation for reset file. Unused. */
+static ssize_t reset_read(struct file *file, char __user *addr, size_t len,
+			  loff_t *pos)
+{
+	/* Allow read operation so that a recursive copy won't fail. */
+	return 0;
+}
+
+static const struct file_operations gcov_reset_fops = {
+	.write	= reset_write,
+	.read	= reset_read,
+};
+
+/*
+ * Create a node for a given profiling data set and add it to all lists and
+ * debugfs. Needs to be called with node_lock held.
+ */
+static void add_node(struct gcov_info *info)
+{
+	char *filename;
+	char *curr;
+	char *next;
+	struct gcov_node *parent;
+	struct gcov_node *node;
+
+	filename = kstrdup(info->filename, GFP_KERNEL);
+	if (!filename)
+		return;
+	parent = &root_node;
+	/* Create directory nodes along the path. */
+	for (curr = filename; (next = strchr(curr, '/')); curr = next + 1) {
+		if (curr == next)
+			continue;
+		*next = 0;
+		if (strcmp(curr, ".") == 0)
+			continue;
+		if (strcmp(curr, "..") == 0) {
+			if (!parent->parent)
+				goto err_remove;
+			parent = parent->parent;
+			continue;
+		}
+		node = get_child_by_name(parent, curr);
+		if (!node) {
+			node = new_node(parent, NULL, curr);
+			if (!node)
+				goto err_remove;
+		}
+		parent = node;
+	}
+	/* Create file node. */
+	node = new_node(parent, info, curr);
+	if (!node)
+		goto err_remove;
+out:
+	kfree(filename);
+	return;
+
+err_remove:
+	remove_node(parent);
+	goto out;
+}
+
+/*
+ * The profiling data set associated with this node is being unloaded. Store a
+ * copy of the profiling data and turn this node into a "ghost".
+ */
+static int ghost_node(struct gcov_node *node)
+{
+	node->ghost = gcov_info_dup(node->info);
+	if (!node->ghost) {
+		pr_warning("could not save data for '%s' (out of memory)\n",
+			   node->info->filename);
+		return -ENOMEM;
+	}
+	node->info = NULL;
+
+	return 0;
+}
+
+/*
+ * Profiling data for this node has been loaded again. Add profiling data
+ * from previous instantiation and turn this node into a regular node.
+ */
+static void revive_node(struct gcov_node *node, struct gcov_info *info)
+{
+	if (gcov_info_is_compatible(node->ghost, info))
+		gcov_info_add(info, node->ghost);
+	else {
+		pr_warning("discarding saved data for '%s' (version changed)\n",
+			   info->filename);
+	}
+	gcov_info_free(node->ghost);
+	node->ghost = NULL;
+	node->info = info;
+}
+
+/*
+ * Callback to create/remove profiling files when code compiled with
+ * -fprofile-arcs is loaded/unloaded.
+ */
+void gcov_event(enum gcov_action action, struct gcov_info *info)
+{
+	struct gcov_node *node;
+
+	mutex_lock(&node_lock);
+	node = get_node_by_name(info->filename);
+	switch (action) {
+	case GCOV_ADD:
+		/* Add new node or revive ghost. */
+		if (!node) {
+			add_node(info);
+			break;
+		}
+		if (gcov_persist)
+			revive_node(node, info);
+		else {
+			pr_warning("could not add '%s' (already exists)\n",
+				   info->filename);
+		}
+		break;
+	case GCOV_REMOVE:
+		/* Remove node or turn into ghost. */
+		if (!node) {
+			pr_warning("could not remove '%s' (not found)\n",
+				   info->filename);
+			break;
+		}
+		if (gcov_persist) {
+			if (!ghost_node(node))
+				break;
+		}
+		remove_node(node);
+		break;
+	}
+	mutex_unlock(&node_lock);
+}
+
+/* Create debugfs entries. */
+static __init int gcov_fs_init(void)
+{
+	int rc = -EIO;
+
+	init_node(&root_node, NULL, NULL, NULL);
+	/*
+	 * /sys/kernel/debug/gcov will be parent for the reset control file
+	 * and all profiling files.
+	 */
+	root_node.dentry = debugfs_create_dir("gcov", NULL);
+	if (!root_node.dentry)
+		goto err_remove;
+	/*
+	 * Create reset file which resets all profiling counts when written
+	 * to.
+	 */
+	reset_dentry = debugfs_create_file("reset", 0600, root_node.dentry,
+					   NULL, &gcov_reset_fops);
+	if (!reset_dentry)
+		goto err_remove;
+	/* Replay previous events to get our fs hierarchy up-to-date. */
+	gcov_enable_events();
+	return 0;
+
+err_remove:
+	pr_err("init failed\n");
+	if (root_node.dentry)
+		debugfs_remove(root_node.dentry);
+
+	return rc;
+}
+device_initcall(gcov_fs_init);
diff --git a/kernel/gcov/gcc_3_4.c b/kernel/gcov/gcc_3_4.c
new file mode 100644
index 00000000000..ae5bb426003
--- /dev/null
+++ b/kernel/gcov/gcc_3_4.c
@@ -0,0 +1,447 @@
+/*
+ *  This code provides functions to handle gcc's profiling data format
+ *  introduced with gcc 3.4. Future versions of gcc may change the gcov
+ *  format (as happened before), so all format-specific information needs
+ *  to be kept modular and easily exchangeable.
+ *
+ *  This file is based on gcc-internal definitions. Functions and data
+ *  structures are defined to be compatible with gcc counterparts.
+ *  For a better understanding, refer to gcc source: gcc/gcov-io.h.
+ *
+ *    Copyright IBM Corp. 2009
+ *    Author(s): Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
+ *
+ *    Uses gcc-internal data definitions.
+ */
+
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/seq_file.h>
+#include <linux/vmalloc.h>
+#include "gcov.h"
+
+/* Symbolic links to be created for each profiling data file. */
+const struct gcov_link gcov_link[] = {
+	{ OBJ_TREE, "gcno" },	/* Link to .gcno file in $(objtree). */
+	{ 0, NULL},
+};
+
+/*
+ * Determine whether a counter is active. Based on gcc magic. Doesn't change
+ * at run-time.
+ */
+static int counter_active(struct gcov_info *info, unsigned int type)
+{
+	return (1 << type) & info->ctr_mask;
+}
+
+/* Determine number of active counters. Based on gcc magic. */
+static unsigned int num_counter_active(struct gcov_info *info)
+{
+	unsigned int i;
+	unsigned int result = 0;
+
+	for (i = 0; i < GCOV_COUNTERS; i++) {
+		if (counter_active(info, i))
+			result++;
+	}
+	return result;
+}
+
+/**
+ * gcov_info_reset - reset profiling data to zero
+ * @info: profiling data set
+ */
+void gcov_info_reset(struct gcov_info *info)
+{
+	unsigned int active = num_counter_active(info);
+	unsigned int i;
+
+	for (i = 0; i < active; i++) {
+		memset(info->counts[i].values, 0,
+		       info->counts[i].num * sizeof(gcov_type));
+	}
+}
+
+/**
+ * gcov_info_is_compatible - check if profiling data can be added
+ * @info1: first profiling data set
+ * @info2: second profiling data set
+ *
+ * Returns non-zero if profiling data can be added, zero otherwise.
+ */
+int gcov_info_is_compatible(struct gcov_info *info1, struct gcov_info *info2)
+{
+	return (info1->stamp == info2->stamp);
+}
+
+/**
+ * gcov_info_add - add up profiling data
+ * @dest: profiling data set to which data is added
+ * @source: profiling data set which is added
+ *
+ * Adds profiling counts of @source to @dest.
+ */
+void gcov_info_add(struct gcov_info *dest, struct gcov_info *source)
+{
+	unsigned int i;
+	unsigned int j;
+
+	for (i = 0; i < num_counter_active(dest); i++) {
+		for (j = 0; j < dest->counts[i].num; j++) {
+			dest->counts[i].values[j] +=
+				source->counts[i].values[j];
+		}
+	}
+}
+
+/* Get size of function info entry. Based on gcc magic. */
+static size_t get_fn_size(struct gcov_info *info)
+{
+	size_t size;
+
+	size = sizeof(struct gcov_fn_info) + num_counter_active(info) *
+	       sizeof(unsigned int);
+	if (__alignof__(struct gcov_fn_info) > sizeof(unsigned int))
+		size = ALIGN(size, __alignof__(struct gcov_fn_info));
+	return size;
+}
+
+/* Get address of function info entry. Based on gcc magic. */
+static struct gcov_fn_info *get_fn_info(struct gcov_info *info, unsigned int fn)
+{
+	return (struct gcov_fn_info *)
+		((char *) info->functions + fn * get_fn_size(info));
+}
+
+/**
+ * gcov_info_dup - duplicate profiling data set
+ * @info: profiling data set to duplicate
+ *
+ * Return newly allocated duplicate on success, %NULL on error.
+ */
+struct gcov_info *gcov_info_dup(struct gcov_info *info)
+{
+	struct gcov_info *dup;
+	unsigned int i;
+	unsigned int active;
+
+	/* Duplicate gcov_info. */
+	active = num_counter_active(info);
+	dup = kzalloc(sizeof(struct gcov_info) +
+		      sizeof(struct gcov_ctr_info) * active, GFP_KERNEL);
+	if (!dup)
+		return NULL;
+	dup->version		= info->version;
+	dup->stamp		= info->stamp;
+	dup->n_functions	= info->n_functions;
+	dup->ctr_mask		= info->ctr_mask;
+	/* Duplicate filename. */
+	dup->filename		= kstrdup(info->filename, GFP_KERNEL);
+	if (!dup->filename)
+		goto err_free;
+	/* Duplicate table of functions. */
+	dup->functions = kmemdup(info->functions, info->n_functions *
+				 get_fn_size(info), GFP_KERNEL);
+	if (!dup->functions)
+		goto err_free;
+	/* Duplicate counter arrays. */
+	for (i = 0; i < active ; i++) {
+		struct gcov_ctr_info *ctr = &info->counts[i];
+		size_t size = ctr->num * sizeof(gcov_type);
+
+		dup->counts[i].num = ctr->num;
+		dup->counts[i].merge = ctr->merge;
+		dup->counts[i].values = vmalloc(size);
+		if (!dup->counts[i].values)
+			goto err_free;
+		memcpy(dup->counts[i].values, ctr->values, size);
+	}
+	return dup;
+
+err_free:
+	gcov_info_free(dup);
+	return NULL;
+}
+
+/**
+ * gcov_info_free - release memory for profiling data set duplicate
+ * @info: profiling data set duplicate to free
+ */
+void gcov_info_free(struct gcov_info *info)
+{
+	unsigned int active = num_counter_active(info);
+	unsigned int i;
+
+	for (i = 0; i < active ; i++)
+		vfree(info->counts[i].values);
+	kfree(info->functions);
+	kfree(info->filename);
+	kfree(info);
+}
+
+/**
+ * struct type_info - iterator helper array
+ * @ctr_type: counter type
+ * @offset: index of the first value of the current function for this type
+ *
+ * This array is needed to convert the in-memory data format into the in-file
+ * data format:
+ *
+ * In-memory:
+ *   for each counter type
+ *     for each function
+ *       values
+ *
+ * In-file:
+ *   for each function
+ *     for each counter type
+ *       values
+ *
+ * See gcc source gcc/gcov-io.h for more information on data organization.
+ */
+struct type_info {
+	int ctr_type;
+	unsigned int offset;
+};
+
+/**
+ * struct gcov_iterator - specifies current file position in logical records
+ * @info: associated profiling data
+ * @record: record type
+ * @function: function number
+ * @type: counter type
+ * @count: index into values array
+ * @num_types: number of counter types
+ * @type_info: helper array to get values-array offset for current function
+ */
+struct gcov_iterator {
+	struct gcov_info *info;
+
+	int record;
+	unsigned int function;
+	unsigned int type;
+	unsigned int count;
+
+	int num_types;
+	struct type_info type_info[0];
+};
+
+static struct gcov_fn_info *get_func(struct gcov_iterator *iter)
+{
+	return get_fn_info(iter->info, iter->function);
+}
+
+static struct type_info *get_type(struct gcov_iterator *iter)
+{
+	return &iter->type_info[iter->type];
+}
+
+/**
+ * gcov_iter_new - allocate and initialize profiling data iterator
+ * @info: profiling data set to be iterated
+ *
+ * Return file iterator on success, %NULL otherwise.
+ */
+struct gcov_iterator *gcov_iter_new(struct gcov_info *info)
+{
+	struct gcov_iterator *iter;
+
+	iter = kzalloc(sizeof(struct gcov_iterator) +
+		       num_counter_active(info) * sizeof(struct type_info),
+		       GFP_KERNEL);
+	if (iter)
+		iter->info = info;
+
+	return iter;
+}
+
+/**
+ * gcov_iter_free - release memory for iterator
+ * @iter: file iterator to free
+ */
+void gcov_iter_free(struct gcov_iterator *iter)
+{
+	kfree(iter);
+}
+
+/**
+ * gcov_iter_get_info - return profiling data set for given file iterator
+ * @iter: file iterator
+ */
+struct gcov_info *gcov_iter_get_info(struct gcov_iterator *iter)
+{
+	return iter->info;
+}
+
+/**
+ * gcov_iter_start - reset file iterator to starting position
+ * @iter: file iterator
+ */
+void gcov_iter_start(struct gcov_iterator *iter)
+{
+	int i;
+
+	iter->record = 0;
+	iter->function = 0;
+	iter->type = 0;
+	iter->count = 0;
+	iter->num_types = 0;
+	for (i = 0; i < GCOV_COUNTERS; i++) {
+		if (counter_active(iter->info, i)) {
+			iter->type_info[iter->num_types].ctr_type = i;
+			iter->type_info[iter->num_types++].offset = 0;
+		}
+	}
+}
+
+/* Mapping of logical record number to actual file content. */
+#define RECORD_FILE_MAGIC	0
+#define RECORD_GCOV_VERSION	1
+#define RECORD_TIME_STAMP	2
+#define RECORD_FUNCTION_TAG	3
+#define RECORD_FUNCTON_TAG_LEN	4
+#define RECORD_FUNCTION_IDENT	5
+#define RECORD_FUNCTION_CHECK	6
+#define RECORD_COUNT_TAG	7
+#define RECORD_COUNT_LEN	8
+#define RECORD_COUNT		9
+
+/**
+ * gcov_iter_next - advance file iterator to next logical record
+ * @iter: file iterator
+ *
+ * Return zero if new position is valid, non-zero if iterator has reached end.
+ */
+int gcov_iter_next(struct gcov_iterator *iter)
+{
+	switch (iter->record) {
+	case RECORD_FILE_MAGIC:
+	case RECORD_GCOV_VERSION:
+	case RECORD_FUNCTION_TAG:
+	case RECORD_FUNCTON_TAG_LEN:
+	case RECORD_FUNCTION_IDENT:
+	case RECORD_COUNT_TAG:
+		/* Advance to next record */
+		iter->record++;
+		break;
+	case RECORD_COUNT:
+		/* Advance to next count */
+		iter->count++;
+		/* fall through */
+	case RECORD_COUNT_LEN:
+		if (iter->count < get_func(iter)->n_ctrs[iter->type]) {
+			iter->record = 9;
+			break;
+		}
+		/* Advance to next counter type */
+		get_type(iter)->offset += iter->count;
+		iter->count = 0;
+		iter->type++;
+		/* fall through */
+	case RECORD_FUNCTION_CHECK:
+		if (iter->type < iter->num_types) {
+			iter->record = 7;
+			break;
+		}
+		/* Advance to next function */
+		iter->type = 0;
+		iter->function++;
+		/* fall through */
+	case RECORD_TIME_STAMP:
+		if (iter->function < iter->info->n_functions)
+			iter->record = 3;
+		else
+			iter->record = -1;
+		break;
+	}
+	/* Check for EOF. */
+	if (iter->record == -1)
+		return -EINVAL;
+	else
+		return 0;
+}
+
+/**
+ * seq_write_gcov_u32 - write 32 bit number in gcov format to seq_file
+ * @seq: seq_file handle
+ * @v: value to be stored
+ *
+ * Number format defined by gcc: numbers are recorded in the 32 bit
+ * unsigned binary form of the endianness of the machine generating the
+ * file.
+ */
+static int seq_write_gcov_u32(struct seq_file *seq, u32 v)
+{
+	return seq_write(seq, &v, sizeof(v));
+}
+
+/**
+ * seq_write_gcov_u64 - write 64 bit number in gcov format to seq_file
+ * @seq: seq_file handle
+ * @v: value to be stored
+ *
+ * Number format defined by gcc: numbers are recorded in the 32 bit
+ * unsigned binary form of the endianness of the machine generating the
+ * file. 64 bit numbers are stored as two 32 bit numbers, the low part
+ * first.
+ */
+static int seq_write_gcov_u64(struct seq_file *seq, u64 v)
+{
+	u32 data[2];
+
+	data[0] = (v & 0xffffffffUL);
+	data[1] = (v >> 32);
+	return seq_write(seq, data, sizeof(data));
+}
+
+/**
+ * gcov_iter_write - write data for current pos to seq_file
+ * @iter: file iterator
+ * @seq: seq_file handle
+ *
+ * Return zero on success, non-zero otherwise.
+ */
+int gcov_iter_write(struct gcov_iterator *iter, struct seq_file *seq)
+{
+	int rc = -EINVAL;
+
+	switch (iter->record) {
+	case RECORD_FILE_MAGIC:
+		rc = seq_write_gcov_u32(seq, GCOV_DATA_MAGIC);
+		break;
+	case RECORD_GCOV_VERSION:
+		rc = seq_write_gcov_u32(seq, iter->info->version);
+		break;
+	case RECORD_TIME_STAMP:
+		rc = seq_write_gcov_u32(seq, iter->info->stamp);
+		break;
+	case RECORD_FUNCTION_TAG:
+		rc = seq_write_gcov_u32(seq, GCOV_TAG_FUNCTION);
+		break;
+	case RECORD_FUNCTON_TAG_LEN:
+		rc = seq_write_gcov_u32(seq, 2);
+		break;
+	case RECORD_FUNCTION_IDENT:
+		rc = seq_write_gcov_u32(seq, get_func(iter)->ident);
+		break;
+	case RECORD_FUNCTION_CHECK:
+		rc = seq_write_gcov_u32(seq, get_func(iter)->checksum);
+		break;
+	case RECORD_COUNT_TAG:
+		rc = seq_write_gcov_u32(seq,
+			GCOV_TAG_FOR_COUNTER(get_type(iter)->ctr_type));
+		break;
+	case RECORD_COUNT_LEN:
+		rc = seq_write_gcov_u32(seq,
+				get_func(iter)->n_ctrs[iter->type] * 2);
+		break;
+	case RECORD_COUNT:
+		rc = seq_write_gcov_u64(seq,
+			iter->info->counts[iter->type].
+				values[iter->count + get_type(iter)->offset]);
+		break;
+	}
+	return rc;
+}
diff --git a/kernel/gcov/gcov.h b/kernel/gcov/gcov.h
new file mode 100644
index 00000000000..060073ebf7a
--- /dev/null
+++ b/kernel/gcov/gcov.h
@@ -0,0 +1,128 @@
+/*
+ *  Profiling infrastructure declarations.
+ *
+ *  This file is based on gcc-internal definitions. Data structures are
+ *  defined to be compatible with gcc counterparts. For a better
+ *  understanding, refer to gcc source: gcc/gcov-io.h.
+ *
+ *    Copyright IBM Corp. 2009
+ *    Author(s): Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
+ *
+ *    Uses gcc-internal data definitions.
+ */
+
+#ifndef GCOV_H
+#define GCOV_H GCOV_H
+
+#include <linux/types.h>
+
+/*
+ * Profiling data types used for gcc 3.4 and above - these are defined by
+ * gcc and need to be kept as close to the original definition as possible to
+ * remain compatible.
+ */
+#define GCOV_COUNTERS		5
+#define GCOV_DATA_MAGIC		((unsigned int) 0x67636461)
+#define GCOV_TAG_FUNCTION	((unsigned int) 0x01000000)
+#define GCOV_TAG_COUNTER_BASE	((unsigned int) 0x01a10000)
+#define GCOV_TAG_FOR_COUNTER(count)					\
+	(GCOV_TAG_COUNTER_BASE + ((unsigned int) (count) << 17))
+
+#if BITS_PER_LONG >= 64
+typedef long gcov_type;
+#else
+typedef long long gcov_type;
+#endif
+
+/**
+ * struct gcov_fn_info - profiling meta data per function
+ * @ident: object file-unique function identifier
+ * @checksum: function checksum
+ * @n_ctrs: number of values per counter type belonging to this function
+ *
+ * This data is generated by gcc during compilation and doesn't change
+ * at run-time.
+ */
+struct gcov_fn_info {
+	unsigned int ident;
+	unsigned int checksum;
+	unsigned int n_ctrs[0];
+};
+
+/**
+ * struct gcov_ctr_info - profiling data per counter type
+ * @num: number of counter values for this type
+ * @values: array of counter values for this type
+ * @merge: merge function for counter values of this type (unused)
+ *
+ * This data is generated by gcc during compilation and doesn't change
+ * at run-time with the exception of the values array.
+ */
+struct gcov_ctr_info {
+	unsigned int	num;
+	gcov_type	*values;
+	void		(*merge)(gcov_type *, unsigned int);
+};
+
+/**
+ * struct gcov_info - profiling data per object file
+ * @version: gcov version magic indicating the gcc version used for compilation
+ * @next: list head for a singly-linked list
+ * @stamp: time stamp
+ * @filename: name of the associated gcov data file
+ * @n_functions: number of instrumented functions
+ * @functions: function data
+ * @ctr_mask: mask specifying which counter types are active
+ * @counts: counter data per counter type
+ *
+ * This data is generated by gcc during compilation and doesn't change
+ * at run-time with the exception of the next pointer.
+ */
+struct gcov_info {
+	unsigned int			version;
+	struct gcov_info		*next;
+	unsigned int			stamp;
+	const char			*filename;
+	unsigned int			n_functions;
+	const struct gcov_fn_info	*functions;
+	unsigned int			ctr_mask;
+	struct gcov_ctr_info		counts[0];
+};
+
+/* Base interface. */
+enum gcov_action {
+	GCOV_ADD,
+	GCOV_REMOVE,
+};
+
+void gcov_event(enum gcov_action action, struct gcov_info *info);
+void gcov_enable_events(void);
+
+/* Iterator control. */
+struct seq_file;
+struct gcov_iterator;
+
+struct gcov_iterator *gcov_iter_new(struct gcov_info *info);
+void gcov_iter_free(struct gcov_iterator *iter);
+void gcov_iter_start(struct gcov_iterator *iter);
+int gcov_iter_next(struct gcov_iterator *iter);
+int gcov_iter_write(struct gcov_iterator *iter, struct seq_file *seq);
+struct gcov_info *gcov_iter_get_info(struct gcov_iterator *iter);
+
+/* gcov_info control. */
+void gcov_info_reset(struct gcov_info *info);
+int gcov_info_is_compatible(struct gcov_info *info1, struct gcov_info *info2);
+void gcov_info_add(struct gcov_info *dest, struct gcov_info *source);
+struct gcov_info *gcov_info_dup(struct gcov_info *info);
+void gcov_info_free(struct gcov_info *info);
+
+struct gcov_link {
+	enum {
+		OBJ_TREE,
+		SRC_TREE,
+	} dir;
+	const char *ext;
+};
+extern const struct gcov_link gcov_link[];
+
+#endif /* GCOV_H */
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index aaf5c9d0577..50da6767290 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -856,7 +856,7 @@ EXPORT_SYMBOL(free_irq);
  *	still called in hard interrupt context and has to check
  *	whether the interrupt originates from the device. If yes it
  *	needs to disable the interrupt on the device and return
- *	IRQ_THREAD_WAKE which will wake up the handler thread and run
+ *	IRQ_WAKE_THREAD which will wake up the handler thread and run
  *	@thread_fn. This split handler design is necessary to support
  *	shared interrupts.
  *
diff --git a/kernel/kthread.c b/kernel/kthread.c
index 7fa44133352..9b1a7de2697 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -27,7 +27,6 @@ struct kthread_create_info
 	/* Information passed to kthread() from kthreadd. */
 	int (*threadfn)(void *data);
 	void *data;
-	struct completion started;
 
 	/* Result passed back to kthread_create() from kthreadd. */
 	struct task_struct *result;
@@ -36,17 +35,13 @@ struct kthread_create_info
 	struct list_head list;
 };
 
-struct kthread_stop_info
-{
-	struct task_struct *k;
-	int err;
-	struct completion done;
+struct kthread {
+	int should_stop;
+	struct completion exited;
 };
 
-/* Thread stopping is done by setthing this var: lock serializes
- * multiple kthread_stop calls. */
-static DEFINE_MUTEX(kthread_stop_lock);
-static struct kthread_stop_info kthread_stop_info;
+#define to_kthread(tsk)	\
+	container_of((tsk)->vfork_done, struct kthread, exited)
 
 /**
  * kthread_should_stop - should this kthread return now?
@@ -57,36 +52,35 @@ static struct kthread_stop_info kthread_stop_info;
  */
 int kthread_should_stop(void)
 {
-	return (kthread_stop_info.k == current);
+	return to_kthread(current)->should_stop;
 }
 EXPORT_SYMBOL(kthread_should_stop);
 
 static int kthread(void *_create)
 {
+	/* Copy data: it's on kthread's stack */
 	struct kthread_create_info *create = _create;
-	int (*threadfn)(void *data);
-	void *data;
-	int ret = -EINTR;
+	int (*threadfn)(void *data) = create->threadfn;
+	void *data = create->data;
+	struct kthread self;
+	int ret;
 
-	/* Copy data: it's on kthread's stack */
-	threadfn = create->threadfn;
-	data = create->data;
+	self.should_stop = 0;
+	init_completion(&self.exited);
+	current->vfork_done = &self.exited;
 
 	/* OK, tell user we're spawned, wait for stop or wakeup */
 	__set_current_state(TASK_UNINTERRUPTIBLE);
 	create->result = current;
-	complete(&create->started);
+	complete(&create->done);
 	schedule();
 
-	if (!kthread_should_stop())
+	ret = -EINTR;
+	if (!self.should_stop)
 		ret = threadfn(data);
 
-	/* It might have exited on its own, w/o kthread_stop.  Check. */
-	if (kthread_should_stop()) {
-		kthread_stop_info.err = ret;
-		complete(&kthread_stop_info.done);
-	}
-	return 0;
+	/* we can't just return, we must preserve "self" on stack */
+	do_exit(ret);
 }
 
 static void create_kthread(struct kthread_create_info *create)
@@ -95,11 +89,10 @@ static void create_kthread(struct kthread_create_info *create)
 
 	/* We want our own signal handler (we take no signals by default). */
 	pid = kernel_thread(kthread, create, CLONE_FS | CLONE_FILES | SIGCHLD);
-	if (pid < 0)
+	if (pid < 0) {
 		create->result = ERR_PTR(pid);
-	else
-		wait_for_completion(&create->started);
-	complete(&create->done);
+		complete(&create->done);
+	}
 }
 
 /**
@@ -130,7 +123,6 @@ struct task_struct *kthread_create(int (*threadfn)(void *data),
 
 	create.threadfn = threadfn;
 	create.data = data;
-	init_completion(&create.started);
 	init_completion(&create.done);
 
 	spin_lock(&kthread_create_lock);
@@ -198,30 +190,22 @@ EXPORT_SYMBOL(kthread_bind);
  */
 int kthread_stop(struct task_struct *k)
 {
+	struct kthread *kthread;
 	int ret;
 
-	mutex_lock(&kthread_stop_lock);
-
-	/* It could exit after stop_info.k set, but before wake_up_process. */
-	get_task_struct(k);
-
 	trace_sched_kthread_stop(k);
+	get_task_struct(k);
 
-	/* Must init completion *before* thread sees kthread_stop_info.k */
-	init_completion(&kthread_stop_info.done);
-	smp_wmb();
+	kthread = to_kthread(k);
+	barrier(); /* it might have exited */
+	if (k->vfork_done != NULL) {
+		kthread->should_stop = 1;
+		wake_up_process(k);
+		wait_for_completion(&kthread->exited);
+	}
+	ret = k->exit_code;
 
-	/* Now set kthread_should_stop() to true, and wake it up. */
-	kthread_stop_info.k = k;
-	wake_up_process(k);
 	put_task_struct(k);
-
-	/* Once it dies, reset stop ptr, gather result and we're done. */
-	wait_for_completion(&kthread_stop_info.done);
-	kthread_stop_info.k = NULL;
-	ret = kthread_stop_info.err;
-	mutex_unlock(&kthread_stop_lock);
-
 	trace_sched_kthread_stop_ret(ret);
 
 	return ret;
diff --git a/kernel/module.c b/kernel/module.c
index 215aaab09e9..38928fcaff2 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -2216,6 +2216,10 @@ static noinline struct module *load_module(void __user *umod,
 	mod->unused_gpl_crcs = section_addr(hdr, sechdrs, secstrings,
 					    "__kcrctab_unused_gpl");
 #endif
+#ifdef CONFIG_CONSTRUCTORS
+	mod->ctors = section_objs(hdr, sechdrs, secstrings, ".ctors",
+				  sizeof(*mod->ctors), &mod->num_ctors);
+#endif
 
 #ifdef CONFIG_MARKERS
 	mod->markers = section_objs(hdr, sechdrs, secstrings, "__markers",
@@ -2389,6 +2393,17 @@ static noinline struct module *load_module(void __user *umod,
 	goto free_hdr;
 }
 
+/* Call module constructors. */
+static void do_mod_ctors(struct module *mod)
+{
+#ifdef CONFIG_CONSTRUCTORS
+	unsigned long i;
+
+	for (i = 0; i < mod->num_ctors; i++)
+		mod->ctors[i]();
+#endif
+}
+
 /* This is where the real work happens */
 SYSCALL_DEFINE3(init_module, void __user *, umod,
 		unsigned long, len, const char __user *, uargs)
@@ -2417,6 +2432,7 @@ SYSCALL_DEFINE3(init_module, void __user *, umod,
 	blocking_notifier_call_chain(&module_notify_list,
 			MODULE_STATE_COMING, mod);
 
+	do_mod_ctors(mod);
 	/* Start the module */
 	if (mod->init != NULL)
 		ret = do_one_initcall(mod->init);
diff --git a/kernel/nsproxy.c b/kernel/nsproxy.c
index 63598dca2d0..09b4ff9711b 100644
--- a/kernel/nsproxy.c
+++ b/kernel/nsproxy.c
@@ -26,19 +26,14 @@ static struct kmem_cache *nsproxy_cachep;
 
 struct nsproxy init_nsproxy = INIT_NSPROXY(init_nsproxy);
 
-/*
- * creates a copy of "orig" with refcount 1.
- */
-static inline struct nsproxy *clone_nsproxy(struct nsproxy *orig)
+static inline struct nsproxy *create_nsproxy(void)
 {
-	struct nsproxy *ns;
+	struct nsproxy *nsproxy;
 
-	ns = kmem_cache_alloc(nsproxy_cachep, GFP_KERNEL);
-	if (ns) {
-		memcpy(ns, orig, sizeof(struct nsproxy));
-		atomic_set(&ns->count, 1);
-	}
-	return ns;
+	nsproxy = kmem_cache_alloc(nsproxy_cachep, GFP_KERNEL);
+	if (nsproxy)
+		atomic_set(&nsproxy->count, 1);
+	return nsproxy;
 }
 
 /*
@@ -52,7 +47,7 @@ static struct nsproxy *create_new_namespaces(unsigned long flags,
 	struct nsproxy *new_nsp;
 	int err;
 
-	new_nsp = clone_nsproxy(tsk->nsproxy);
+	new_nsp = create_nsproxy();
 	if (!new_nsp)
 		return ERR_PTR(-ENOMEM);
 
diff --git a/kernel/perf_counter.c b/kernel/perf_counter.c
index 29b685f551a..1a933a221ea 100644
--- a/kernel/perf_counter.c
+++ b/kernel/perf_counter.c
@@ -124,7 +124,7 @@ void perf_enable(void)
 
 static void get_ctx(struct perf_counter_context *ctx)
 {
-	atomic_inc(&ctx->refcount);
+	WARN_ON(!atomic_inc_not_zero(&ctx->refcount));
 }
 
 static void free_ctx(struct rcu_head *head)
@@ -175,6 +175,11 @@ perf_lock_task_context(struct task_struct *task, unsigned long *flags)
 			spin_unlock_irqrestore(&ctx->lock, *flags);
 			goto retry;
 		}
+
+		if (!atomic_inc_not_zero(&ctx->refcount)) {
+			spin_unlock_irqrestore(&ctx->lock, *flags);
+			ctx = NULL;
+		}
 	}
 	rcu_read_unlock();
 	return ctx;
@@ -193,7 +198,6 @@ static struct perf_counter_context *perf_pin_task_context(struct task_struct *ta
 	ctx = perf_lock_task_context(task, &flags);
 	if (ctx) {
 		++ctx->pin_count;
-		get_ctx(ctx);
 		spin_unlock_irqrestore(&ctx->lock, flags);
 	}
 	return ctx;
@@ -1283,7 +1287,7 @@ static void perf_ctx_adjust_freq(struct perf_counter_context *ctx)
 		if (!interrupts) {
 			perf_disable();
 			counter->pmu->disable(counter);
-			atomic_set(&hwc->period_left, 0);
+			atomic64_set(&hwc->period_left, 0);
 			counter->pmu->enable(counter);
 			perf_enable();
 		}
@@ -1459,11 +1463,6 @@ static struct perf_counter_context *find_get_context(pid_t pid, int cpu)
 			put_ctx(parent_ctx);
 			ctx->parent_ctx = NULL;		/* no longer a clone */
 		}
-		/*
-		 * Get an extra reference before dropping the lock so that
-		 * this context won't get freed if the task exits.
-		 */
-		get_ctx(ctx);
 		spin_unlock_irqrestore(&ctx->lock, flags);
 	}
 
@@ -1553,7 +1552,7 @@ static int perf_release(struct inode *inode, struct file *file)
 static ssize_t
 perf_read_hw(struct perf_counter *counter, char __user *buf, size_t count)
 {
-	u64 values[3];
+	u64 values[4];
 	int n;
 
 	/*
@@ -1620,22 +1619,6 @@ static void perf_counter_reset(struct perf_counter *counter)
 	perf_counter_update_userpage(counter);
 }
 
-static void perf_counter_for_each_sibling(struct perf_counter *counter,
-					  void (*func)(struct perf_counter *))
-{
-	struct perf_counter_context *ctx = counter->ctx;
-	struct perf_counter *sibling;
-
-	WARN_ON_ONCE(ctx->parent_ctx);
-	mutex_lock(&ctx->mutex);
-	counter = counter->group_leader;
-
-	func(counter);
-	list_for_each_entry(sibling, &counter->sibling_list, list_entry)
-		func(sibling);
-	mutex_unlock(&ctx->mutex);
-}
-
 /*
  * Holding the top-level counter's child_mutex means that any
  * descendant process that has inherited this counter will block
@@ -1658,14 +1641,18 @@ static void perf_counter_for_each_child(struct perf_counter *counter,
 static void perf_counter_for_each(struct perf_counter *counter,
 				  void (*func)(struct perf_counter *))
 {
-	struct perf_counter *child;
+	struct perf_counter_context *ctx = counter->ctx;
+	struct perf_counter *sibling;
 
-	WARN_ON_ONCE(counter->ctx->parent_ctx);
-	mutex_lock(&counter->child_mutex);
-	perf_counter_for_each_sibling(counter, func);
-	list_for_each_entry(child, &counter->child_list, child_list)
-		perf_counter_for_each_sibling(child, func);
-	mutex_unlock(&counter->child_mutex);
+	WARN_ON_ONCE(ctx->parent_ctx);
+	mutex_lock(&ctx->mutex);
+	counter = counter->group_leader;
+
+	perf_counter_for_each_child(counter, func);
+	func(counter);
+	list_for_each_entry(sibling, &counter->sibling_list, list_entry)
+		perf_counter_for_each_child(counter, func);
+	mutex_unlock(&ctx->mutex);
 }
 
 static int perf_counter_period(struct perf_counter *counter, u64 __user *arg)
@@ -1806,6 +1793,12 @@ static int perf_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 	struct perf_mmap_data *data;
 	int ret = VM_FAULT_SIGBUS;
 
+	if (vmf->flags & FAULT_FLAG_MKWRITE) {
+		if (vmf->pgoff == 0)
+			ret = 0;
+		return ret;
+	}
+
 	rcu_read_lock();
 	data = rcu_dereference(counter->data);
 	if (!data)
@@ -1819,9 +1812,16 @@ static int perf_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 		if ((unsigned)nr > data->nr_pages)
 			goto unlock;
 
+		if (vmf->flags & FAULT_FLAG_WRITE)
+			goto unlock;
+
 		vmf->page = virt_to_page(data->data_pages[nr]);
 	}
+
 	get_page(vmf->page);
+	vmf->page->mapping = vma->vm_file->f_mapping;
+	vmf->page->index   = vmf->pgoff;
+
 	ret = 0;
 unlock:
 	rcu_read_unlock();
@@ -1874,6 +1874,14 @@ fail:
 	return -ENOMEM;
 }
 
+static void perf_mmap_free_page(unsigned long addr)
+{
+	struct page *page = virt_to_page(addr);
+
+	page->mapping = NULL;
+	__free_page(page);
+}
+
 static void __perf_mmap_data_free(struct rcu_head *rcu_head)
 {
 	struct perf_mmap_data *data;
@@ -1881,9 +1889,10 @@ static void __perf_mmap_data_free(struct rcu_head *rcu_head)
 
 	data = container_of(rcu_head, struct perf_mmap_data, rcu_head);
 
-	free_page((unsigned long)data->user_page);
+	perf_mmap_free_page((unsigned long)data->user_page);
 	for (i = 0; i < data->nr_pages; i++)
-		free_page((unsigned long)data->data_pages[i]);
+		perf_mmap_free_page((unsigned long)data->data_pages[i]);
+
 	kfree(data);
 }
 
@@ -1920,9 +1929,10 @@ static void perf_mmap_close(struct vm_area_struct *vma)
 }
 
 static struct vm_operations_struct perf_mmap_vmops = {
-	.open  = perf_mmap_open,
-	.close = perf_mmap_close,
-	.fault = perf_mmap_fault,
+	.open		= perf_mmap_open,
+	.close		= perf_mmap_close,
+	.fault		= perf_mmap_fault,
+	.page_mkwrite	= perf_mmap_fault,
 };
 
 static int perf_mmap(struct file *file, struct vm_area_struct *vma)
@@ -1936,7 +1946,7 @@ static int perf_mmap(struct file *file, struct vm_area_struct *vma)
 	long user_extra, extra;
 	int ret = 0;
 
-	if (!(vma->vm_flags & VM_SHARED) || (vma->vm_flags & VM_WRITE))
+	if (!(vma->vm_flags & VM_SHARED))
 		return -EINVAL;
 
 	vma_size = vma->vm_end - vma->vm_start;
@@ -1995,10 +2005,12 @@ static int perf_mmap(struct file *file, struct vm_area_struct *vma)
 	atomic_long_add(user_extra, &user->locked_vm);
 	vma->vm_mm->locked_vm += extra;
 	counter->data->nr_locked = extra;
+	if (vma->vm_flags & VM_WRITE)
+		counter->data->writable = 1;
+
 unlock:
 	mutex_unlock(&counter->mmap_mutex);
 
-	vma->vm_flags &= ~VM_MAYWRITE;
 	vma->vm_flags |= VM_RESERVED;
 	vma->vm_ops = &perf_mmap_vmops;
 
@@ -2175,11 +2187,38 @@ struct perf_output_handle {
 	unsigned long		head;
 	unsigned long		offset;
 	int			nmi;
-	int			overflow;
+	int			sample;
 	int			locked;
 	unsigned long		flags;
 };
 
+static bool perf_output_space(struct perf_mmap_data *data,
+			      unsigned int offset, unsigned int head)
+{
+	unsigned long tail;
+	unsigned long mask;
+
+	if (!data->writable)
+		return true;
+
+	mask = (data->nr_pages << PAGE_SHIFT) - 1;
+	/*
+	 * Userspace could choose to issue a mb() before updating the tail
+	 * pointer. So that all reads will be completed before the write is
+	 * issued.
+	 */
+	tail = ACCESS_ONCE(data->user_page->data_tail);
+	smp_rmb();
+
+	offset = (offset - tail) & mask;
+	head   = (head   - tail) & mask;
+
+	if ((int)(head - offset) < 0)
+		return false;
+
+	return true;
+}
+
 static void perf_output_wakeup(struct perf_output_handle *handle)
 {
 	atomic_set(&handle->data->poll, POLL_IN);
@@ -2270,12 +2309,57 @@ out:
 	local_irq_restore(handle->flags);
 }
 
+static void perf_output_copy(struct perf_output_handle *handle,
+			     const void *buf, unsigned int len)
+{
+	unsigned int pages_mask;
+	unsigned int offset;
+	unsigned int size;
+	void **pages;
+
+	offset		= handle->offset;
+	pages_mask	= handle->data->nr_pages - 1;
+	pages		= handle->data->data_pages;
+
+	do {
+		unsigned int page_offset;
+		int nr;
+
+		nr	    = (offset >> PAGE_SHIFT) & pages_mask;
+		page_offset = offset & (PAGE_SIZE - 1);
+		size	    = min_t(unsigned int, PAGE_SIZE - page_offset, len);
+
+		memcpy(pages[nr] + page_offset, buf, size);
+
+		len	    -= size;
+		buf	    += size;
+		offset	    += size;
+	} while (len);
+
+	handle->offset = offset;
+
+	/*
+	 * Check we didn't copy past our reservation window, taking the
+	 * possible unsigned int wrap into account.
+	 */
+	WARN_ON_ONCE(((long)(handle->head - handle->offset)) < 0);
+}
+
+#define perf_output_put(handle, x) \
+	perf_output_copy((handle), &(x), sizeof(x))
+
 static int perf_output_begin(struct perf_output_handle *handle,
 			     struct perf_counter *counter, unsigned int size,
-			     int nmi, int overflow)
+			     int nmi, int sample)
 {
 	struct perf_mmap_data *data;
 	unsigned int offset, head;
+	int have_lost;
+	struct {
+		struct perf_event_header header;
+		u64			 id;
+		u64			 lost;
+	} lost_event;
 
 	/*
 	 * For inherited counters we send all the output towards the parent.
@@ -2288,19 +2372,25 @@ static int perf_output_begin(struct perf_output_handle *handle,
 	if (!data)
 		goto out;
 
-	handle->data	 = data;
-	handle->counter	 = counter;
-	handle->nmi	 = nmi;
-	handle->overflow = overflow;
+	handle->data	= data;
+	handle->counter	= counter;
+	handle->nmi	= nmi;
+	handle->sample	= sample;
 
 	if (!data->nr_pages)
 		goto fail;
 
+	have_lost = atomic_read(&data->lost);
+	if (have_lost)
+		size += sizeof(lost_event);
+
 	perf_output_lock(handle);
 
 	do {
 		offset = head = atomic_long_read(&data->head);
 		head += size;
+		if (unlikely(!perf_output_space(data, offset, head)))
+			goto fail;
 	} while (atomic_long_cmpxchg(&data->head, offset, head) != offset);
 
 	handle->offset	= offset;
@@ -2309,55 +2399,27 @@ static int perf_output_begin(struct perf_output_handle *handle,
 	if ((offset >> PAGE_SHIFT) != (head >> PAGE_SHIFT))
 		atomic_set(&data->wakeup, 1);
 
+	if (have_lost) {
+		lost_event.header.type = PERF_EVENT_LOST;
+		lost_event.header.misc = 0;
+		lost_event.header.size = sizeof(lost_event);
+		lost_event.id          = counter->id;
+		lost_event.lost        = atomic_xchg(&data->lost, 0);
+
+		perf_output_put(handle, lost_event);
+	}
+
 	return 0;
 
 fail:
-	perf_output_wakeup(handle);
+	atomic_inc(&data->lost);
+	perf_output_unlock(handle);
 out:
 	rcu_read_unlock();
 
 	return -ENOSPC;
 }
 
-static void perf_output_copy(struct perf_output_handle *handle,
-			     const void *buf, unsigned int len)
-{
-	unsigned int pages_mask;
-	unsigned int offset;
-	unsigned int size;
-	void **pages;
-
-	offset		= handle->offset;
-	pages_mask	= handle->data->nr_pages - 1;
-	pages		= handle->data->data_pages;
-
-	do {
-		unsigned int page_offset;
-		int nr;
-
-		nr	    = (offset >> PAGE_SHIFT) & pages_mask;
-		page_offset = offset & (PAGE_SIZE - 1);
-		size	    = min_t(unsigned int, PAGE_SIZE - page_offset, len);
-
-		memcpy(pages[nr] + page_offset, buf, size);
-
-		len	    -= size;
-		buf	    += size;
-		offset	    += size;
-	} while (len);
-
-	handle->offset = offset;
-
-	/*
-	 * Check we didn't copy past our reservation window, taking the
-	 * possible unsigned int wrap into account.
-	 */
-	WARN_ON_ONCE(((long)(handle->head - handle->offset)) < 0);
-}
-
-#define perf_output_put(handle, x) \
-	perf_output_copy((handle), &(x), sizeof(x))
-
 static void perf_output_end(struct perf_output_handle *handle)
 {
 	struct perf_counter *counter = handle->counter;
@@ -2365,7 +2427,7 @@ static void perf_output_end(struct perf_output_handle *handle)
 
 	int wakeup_events = counter->attr.wakeup_events;
 
-	if (handle->overflow && wakeup_events) {
+	if (handle->sample && wakeup_events) {
 		int events = atomic_inc_return(&data->events);
 		if (events >= wakeup_events) {
 			atomic_sub(wakeup_events, &data->events);
@@ -2970,7 +3032,7 @@ static void perf_log_throttle(struct perf_counter *counter, int enable)
 }
 
 /*
- * Generic counter overflow handling.
+ * Generic counter overflow handling, sampling.
  */
 
 int perf_counter_overflow(struct perf_counter *counter, int nmi,
@@ -3109,20 +3171,15 @@ static enum hrtimer_restart perf_swcounter_hrtimer(struct hrtimer *hrtimer)
 }
 
 static void perf_swcounter_overflow(struct perf_counter *counter,
-				    int nmi, struct pt_regs *regs, u64 addr)
+				    int nmi, struct perf_sample_data *data)
 {
-	struct perf_sample_data data = {
-		.regs	= regs,
-		.addr	= addr,
-		.period	= counter->hw.last_period,
-	};
+	data->period = counter->hw.last_period;
 
 	perf_swcounter_update(counter);
 	perf_swcounter_set_period(counter);
-	if (perf_counter_overflow(counter, nmi, &data))
+	if (perf_counter_overflow(counter, nmi, data))
 		/* soft-disable the counter */
 		;
-
 }
 
 static int perf_swcounter_is_counting(struct perf_counter *counter)
@@ -3187,18 +3244,18 @@ static int perf_swcounter_match(struct perf_counter *counter,
 }
 
 static void perf_swcounter_add(struct perf_counter *counter, u64 nr,
-			       int nmi, struct pt_regs *regs, u64 addr)
+			       int nmi, struct perf_sample_data *data)
 {
 	int neg = atomic64_add_negative(nr, &counter->hw.count);
 
-	if (counter->hw.sample_period && !neg && regs)
-		perf_swcounter_overflow(counter, nmi, regs, addr);
+	if (counter->hw.sample_period && !neg && data->regs)
+		perf_swcounter_overflow(counter, nmi, data);
 }
 
 static void perf_swcounter_ctx_event(struct perf_counter_context *ctx,
-				     enum perf_type_id type, u32 event,
-				     u64 nr, int nmi, struct pt_regs *regs,
-				     u64 addr)
+				     enum perf_type_id type,
+				     u32 event, u64 nr, int nmi,
+				     struct perf_sample_data *data)
 {
 	struct perf_counter *counter;
 
@@ -3207,8 +3264,8 @@ static void perf_swcounter_ctx_event(struct perf_counter_context *ctx,
 
 	rcu_read_lock();
 	list_for_each_entry_rcu(counter, &ctx->event_list, event_entry) {
-		if (perf_swcounter_match(counter, type, event, regs))
-			perf_swcounter_add(counter, nr, nmi, regs, addr);
+		if (perf_swcounter_match(counter, type, event, data->regs))
+			perf_swcounter_add(counter, nr, nmi, data);
 	}
 	rcu_read_unlock();
 }
@@ -3227,9 +3284,9 @@ static int *perf_swcounter_recursion_context(struct perf_cpu_context *cpuctx)
 	return &cpuctx->recursion[0];
 }
 
-static void __perf_swcounter_event(enum perf_type_id type, u32 event,
-				   u64 nr, int nmi, struct pt_regs *regs,
-				   u64 addr)
+static void do_perf_swcounter_event(enum perf_type_id type, u32 event,
+				    u64 nr, int nmi,
+				    struct perf_sample_data *data)
 {
 	struct perf_cpu_context *cpuctx = &get_cpu_var(perf_cpu_context);
 	int *recursion = perf_swcounter_recursion_context(cpuctx);
@@ -3242,7 +3299,7 @@ static void __perf_swcounter_event(enum perf_type_id type, u32 event,
 	barrier();
 
 	perf_swcounter_ctx_event(&cpuctx->ctx, type, event,
-				 nr, nmi, regs, addr);
+				 nr, nmi, data);
 	rcu_read_lock();
 	/*
 	 * doesn't really matter which of the child contexts the
@@ -3250,7 +3307,7 @@ static void __perf_swcounter_event(enum perf_type_id type, u32 event,
 	 */
 	ctx = rcu_dereference(current->perf_counter_ctxp);
 	if (ctx)
-		perf_swcounter_ctx_event(ctx, type, event, nr, nmi, regs, addr);
+		perf_swcounter_ctx_event(ctx, type, event, nr, nmi, data);
 	rcu_read_unlock();
 
 	barrier();
@@ -3263,7 +3320,12 @@ out:
 void
 perf_swcounter_event(u32 event, u64 nr, int nmi, struct pt_regs *regs, u64 addr)
 {
-	__perf_swcounter_event(PERF_TYPE_SOFTWARE, event, nr, nmi, regs, addr);
+	struct perf_sample_data data = {
+		.regs = regs,
+		.addr = addr,
+	};
+
+	do_perf_swcounter_event(PERF_TYPE_SOFTWARE, event, nr, nmi, &data);
 }
 
 static void perf_swcounter_read(struct perf_counter *counter)
@@ -3404,36 +3466,18 @@ static const struct pmu perf_ops_task_clock = {
 	.read		= task_clock_perf_counter_read,
 };
 
-/*
- * Software counter: cpu migrations
- */
-void perf_counter_task_migration(struct task_struct *task, int cpu)
-{
-	struct perf_cpu_context *cpuctx = &per_cpu(perf_cpu_context, cpu);
-	struct perf_counter_context *ctx;
-
-	perf_swcounter_ctx_event(&cpuctx->ctx, PERF_TYPE_SOFTWARE,
-				 PERF_COUNT_SW_CPU_MIGRATIONS,
-				 1, 1, NULL, 0);
-
-	ctx = perf_pin_task_context(task);
-	if (ctx) {
-		perf_swcounter_ctx_event(ctx, PERF_TYPE_SOFTWARE,
-					 PERF_COUNT_SW_CPU_MIGRATIONS,
-					 1, 1, NULL, 0);
-		perf_unpin_context(ctx);
-	}
-}
-
 #ifdef CONFIG_EVENT_PROFILE
 void perf_tpcounter_event(int event_id)
 {
-	struct pt_regs *regs = get_irq_regs();
+	struct perf_sample_data data = {
+		.regs = get_irq_regs();
+		.addr = 0,
+	};
 
-	if (!regs)
-		regs = task_pt_regs(current);
+	if (!data.regs)
+		data.regs = task_pt_regs(current);
 
-	__perf_swcounter_event(PERF_TYPE_TRACEPOINT, event_id, 1, 1, regs, 0);
+	do_perf_swcounter_event(PERF_TYPE_TRACEPOINT, event_id, 1, 1, &data);
 }
 EXPORT_SYMBOL_GPL(perf_tpcounter_event);
 
diff --git a/kernel/pid.c b/kernel/pid.c
index b2e5f78fd28..31310b5d3f5 100644
--- a/kernel/pid.c
+++ b/kernel/pid.c
@@ -378,26 +378,15 @@ EXPORT_SYMBOL(pid_task);
 /*
  * Must be called under rcu_read_lock() or with tasklist_lock read-held.
  */
-struct task_struct *find_task_by_pid_type_ns(int type, int nr,
-		struct pid_namespace *ns)
+struct task_struct *find_task_by_pid_ns(pid_t nr, struct pid_namespace *ns)
 {
-	return pid_task(find_pid_ns(nr, ns), type);
+	return pid_task(find_pid_ns(nr, ns), PIDTYPE_PID);
 }
 
-EXPORT_SYMBOL(find_task_by_pid_type_ns);
-
 struct task_struct *find_task_by_vpid(pid_t vnr)
 {
-	return find_task_by_pid_type_ns(PIDTYPE_PID, vnr,
-			current->nsproxy->pid_ns);
-}
-EXPORT_SYMBOL(find_task_by_vpid);
-
-struct task_struct *find_task_by_pid_ns(pid_t nr, struct pid_namespace *ns)
-{
-	return find_task_by_pid_type_ns(PIDTYPE_PID, nr, ns);
+	return find_task_by_pid_ns(vnr, current->nsproxy->pid_ns);
 }
-EXPORT_SYMBOL(find_task_by_pid_ns);
 
 struct pid *get_task_pid(struct task_struct *task, enum pid_type type)
 {
diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c
index 2d1001b4858..821722ae58a 100644
--- a/kernel/pid_namespace.c
+++ b/kernel/pid_namespace.c
@@ -67,9 +67,10 @@ err_alloc:
 	return NULL;
 }
 
-static struct pid_namespace *create_pid_namespace(unsigned int level)
+static struct pid_namespace *create_pid_namespace(struct pid_namespace *parent_pid_ns)
 {
 	struct pid_namespace *ns;
+	unsigned int level = parent_pid_ns->level + 1;
 	int i;
 
 	ns = kmem_cache_zalloc(pid_ns_cachep, GFP_KERNEL);
@@ -86,6 +87,7 @@ static struct pid_namespace *create_pid_namespace(unsigned int level)
 
 	kref_init(&ns->kref);
 	ns->level = level;
+	ns->parent = get_pid_ns(parent_pid_ns);
 
 	set_bit(0, ns->pidmap[0].page);
 	atomic_set(&ns->pidmap[0].nr_free, BITS_PER_PAGE - 1);
@@ -114,25 +116,11 @@ static void destroy_pid_namespace(struct pid_namespace *ns)
 
 struct pid_namespace *copy_pid_ns(unsigned long flags, struct pid_namespace *old_ns)
 {
-	struct pid_namespace *new_ns;
-
-	BUG_ON(!old_ns);
-	new_ns = get_pid_ns(old_ns);
 	if (!(flags & CLONE_NEWPID))
-		goto out;
-
-	new_ns = ERR_PTR(-EINVAL);
+		return get_pid_ns(old_ns);
 	if (flags & CLONE_THREAD)
-		goto out_put;
-
-	new_ns = create_pid_namespace(old_ns->level + 1);
-	if (!IS_ERR(new_ns))
-		new_ns->parent = get_pid_ns(old_ns);
-
-out_put:
-	put_pid_ns(old_ns);
-out:
-	return new_ns;
+		return ERR_PTR(-EINVAL);
+	return create_pid_namespace(old_ns);
 }
 
 void free_pid_ns(struct kref *kref)
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index f6d8b8cb5e3..61c78b2c07b 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -167,67 +167,82 @@ bool ptrace_may_access(struct task_struct *task, unsigned int mode)
 int ptrace_attach(struct task_struct *task)
 {
 	int retval;
-	unsigned long flags;
 
 	audit_ptrace(task);
 
 	retval = -EPERM;
+	if (unlikely(task->flags & PF_KTHREAD))
+		goto out;
 	if (same_thread_group(task, current))
 		goto out;
 
-	/* Protect the target's credential calculations against our
+	/*
+	 * Protect exec's credential calculations against our interference;
 	 * interference; SUID, SGID and LSM creds get determined differently
 	 * under ptrace.
 	 */
 	retval = mutex_lock_interruptible(&task->cred_guard_mutex);
-	if (retval  < 0)
+	if (retval < 0)
 		goto out;
 
-	retval = -EPERM;
-repeat:
-	/*
-	 * Nasty, nasty.
-	 *
-	 * We want to hold both the task-lock and the
-	 * tasklist_lock for writing at the same time.
-	 * But that's against the rules (tasklist_lock
-	 * is taken for reading by interrupts on other
-	 * cpu's that may have task_lock).
-	 */
 	task_lock(task);
-	if (!write_trylock_irqsave(&tasklist_lock, flags)) {
-		task_unlock(task);
-		do {
-			cpu_relax();
-		} while (!write_can_lock(&tasklist_lock));
-		goto repeat;
-	}
-
-	if (!task->mm)
-		goto bad;
-	/* the same process cannot be attached many times */
-	if (task->ptrace & PT_PTRACED)
-		goto bad;
 	retval = __ptrace_may_access(task, PTRACE_MODE_ATTACH);
+	task_unlock(task);
 	if (retval)
-		goto bad;
+		goto unlock_creds;
 
-	/* Go */
-	task->ptrace |= PT_PTRACED;
+	write_lock_irq(&tasklist_lock);
+	retval = -EPERM;
+	if (unlikely(task->exit_state))
+		goto unlock_tasklist;
+	if (task->ptrace)
+		goto unlock_tasklist;
+
+	task->ptrace = PT_PTRACED;
 	if (capable(CAP_SYS_PTRACE))
 		task->ptrace |= PT_PTRACE_CAP;
 
 	__ptrace_link(task, current);
-
 	send_sig_info(SIGSTOP, SEND_SIG_FORCED, task);
-bad:
-	write_unlock_irqrestore(&tasklist_lock, flags);
-	task_unlock(task);
+
+	retval = 0;
+unlock_tasklist:
+	write_unlock_irq(&tasklist_lock);
+unlock_creds:
 	mutex_unlock(&task->cred_guard_mutex);
 out:
 	return retval;
 }
 
+/**
+ * ptrace_traceme  --  helper for PTRACE_TRACEME
+ *
+ * Performs checks and sets PT_PTRACED.
+ * Should be used by all ptrace implementations for PTRACE_TRACEME.
+ */
+int ptrace_traceme(void)
+{
+	int ret = -EPERM;
+
+	write_lock_irq(&tasklist_lock);
+	/* Are we already being traced? */
+	if (!current->ptrace) {
+		ret = security_ptrace_traceme(current->parent);
+		/*
+		 * Check PF_EXITING to ensure ->real_parent has not passed
+		 * exit_ptrace(). Otherwise we don't report the error but
+		 * pretend ->real_parent untraces us right after return.
+		 */
+		if (!ret && !(current->real_parent->flags & PF_EXITING)) {
+			current->ptrace = PT_PTRACED;
+			__ptrace_link(current, current->real_parent);
+		}
+	}
+	write_unlock_irq(&tasklist_lock);
+
+	return ret;
+}
+
 /*
  * Called with irqs disabled, returns true if childs should reap themselves.
  */
@@ -409,37 +424,33 @@ static int ptrace_setoptions(struct task_struct *child, long data)
 
 static int ptrace_getsiginfo(struct task_struct *child, siginfo_t *info)
 {
+	unsigned long flags;
 	int error = -ESRCH;
 
-	read_lock(&tasklist_lock);
-	if (likely(child->sighand != NULL)) {
+	if (lock_task_sighand(child, &flags)) {
 		error = -EINVAL;
-		spin_lock_irq(&child->sighand->siglock);
 		if (likely(child->last_siginfo != NULL)) {
 			*info = *child->last_siginfo;
 			error = 0;
 		}
-		spin_unlock_irq(&child->sighand->siglock);
+		unlock_task_sighand(child, &flags);
 	}
-	read_unlock(&tasklist_lock);
 	return error;
 }
 
 static int ptrace_setsiginfo(struct task_struct *child, const siginfo_t *info)
 {
+	unsigned long flags;
 	int error = -ESRCH;
 
-	read_lock(&tasklist_lock);
-	if (likely(child->sighand != NULL)) {
+	if (lock_task_sighand(child, &flags)) {
 		error = -EINVAL;
-		spin_lock_irq(&child->sighand->siglock);
 		if (likely(child->last_siginfo != NULL)) {
 			*child->last_siginfo = *info;
 			error = 0;
 		}
-		spin_unlock_irq(&child->sighand->siglock);
+		unlock_task_sighand(child, &flags);
 	}
-	read_unlock(&tasklist_lock);
 	return error;
 }
 
@@ -566,72 +577,16 @@ int ptrace_request(struct task_struct *child, long request,
 	return ret;
 }
 
-/**
- * ptrace_traceme  --  helper for PTRACE_TRACEME
- *
- * Performs checks and sets PT_PTRACED.
- * Should be used by all ptrace implementations for PTRACE_TRACEME.
- */
-int ptrace_traceme(void)
-{
-	int ret = -EPERM;
-
-	/*
-	 * Are we already being traced?
-	 */
-repeat:
-	task_lock(current);
-	if (!(current->ptrace & PT_PTRACED)) {
-		/*
-		 * See ptrace_attach() comments about the locking here.
-		 */
-		unsigned long flags;
-		if (!write_trylock_irqsave(&tasklist_lock, flags)) {
-			task_unlock(current);
-			do {
-				cpu_relax();
-			} while (!write_can_lock(&tasklist_lock));
-			goto repeat;
-		}
-
-		ret = security_ptrace_traceme(current->parent);
-
-		/*
-		 * Check PF_EXITING to ensure ->real_parent has not passed
-		 * exit_ptrace(). Otherwise we don't report the error but
-		 * pretend ->real_parent untraces us right after return.
-		 */
-		if (!ret && !(current->real_parent->flags & PF_EXITING)) {
-			current->ptrace |= PT_PTRACED;
-			__ptrace_link(current, current->real_parent);
-		}
-
-		write_unlock_irqrestore(&tasklist_lock, flags);
-	}
-	task_unlock(current);
-	return ret;
-}
-
-/**
- * ptrace_get_task_struct  --  grab a task struct reference for ptrace
- * @pid:       process id to grab a task_struct reference of
- *
- * This function is a helper for ptrace implementations.  It checks
- * permissions and then grabs a task struct for use of the actual
- * ptrace implementation.
- *
- * Returns the task_struct for @pid or an ERR_PTR() on failure.
- */
-struct task_struct *ptrace_get_task_struct(pid_t pid)
+static struct task_struct *ptrace_get_task_struct(pid_t pid)
 {
 	struct task_struct *child;
 
-	read_lock(&tasklist_lock);
+	rcu_read_lock();
 	child = find_task_by_vpid(pid);
 	if (child)
 		get_task_struct(child);
+	rcu_read_unlock();
 
-	read_unlock(&tasklist_lock);
 	if (!child)
 		return ERR_PTR(-ESRCH);
 	return child;
diff --git a/kernel/res_counter.c b/kernel/res_counter.c
index bf8e7534c80..e1338f07431 100644
--- a/kernel/res_counter.c
+++ b/kernel/res_counter.c
@@ -18,7 +18,7 @@
 void res_counter_init(struct res_counter *counter, struct res_counter *parent)
 {
 	spin_lock_init(&counter->lock);
-	counter->limit = (unsigned long long)LLONG_MAX;
+	counter->limit = RESOURCE_MAX;
 	counter->parent = parent;
 }
 
@@ -133,6 +133,16 @@ int res_counter_memparse_write_strategy(const char *buf,
 					unsigned long long *res)
 {
 	char *end;
+
+	/* return RESOURCE_MAX(unlimited) if "-1" is specified */
+	if (*buf == '-') {
+		*res = simple_strtoull(buf + 1, &end, 10);
+		if (*res != 1 || *end != '\0')
+			return -EINVAL;
+		*res = RESOURCE_MAX;
+		return 0;
+	}
+
 	/* FIXME - make memparse() take const char* args */
 	*res = memparse((char *)buf, &end);
 	if (*end != '\0')
diff --git a/kernel/sched.c b/kernel/sched.c
index 8fb88a906aa..7c9098d186e 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -1978,7 +1978,8 @@ void set_task_cpu(struct task_struct *p, unsigned int new_cpu)
 		if (task_hot(p, old_rq->clock, NULL))
 			schedstat_inc(p, se.nr_forced2_migrations);
 #endif
-		perf_counter_task_migration(p, new_cpu);
+		perf_swcounter_event(PERF_COUNT_SW_CPU_MIGRATIONS,
+				     1, 1, NULL, 0);
 	}
 	p->se.vruntime -= old_cfsrq->min_vruntime -
 					 new_cfsrq->min_vruntime;
@@ -7045,7 +7046,7 @@ static int migration_thread(void *data)
 
 		if (cpu_is_offline(cpu)) {
 			spin_unlock_irq(&rq->lock);
-			goto wait_to_die;
+			break;
 		}
 
 		if (rq->active_balance) {
@@ -7071,16 +7072,7 @@ static int migration_thread(void *data)
 		complete(&req->done);
 	}
 	__set_current_state(TASK_RUNNING);
-	return 0;
 
-wait_to_die:
-	/* Wait for kthread_stop */
-	set_current_state(TASK_INTERRUPTIBLE);
-	while (!kthread_should_stop()) {
-		schedule();
-		set_current_state(TASK_INTERRUPTIBLE);
-	}
-	__set_current_state(TASK_RUNNING);
 	return 0;
 }
 
@@ -7494,6 +7486,7 @@ migration_call(struct notifier_block *nfb, unsigned long action, void *hcpu)
 		rq = task_rq_lock(p, &flags);
 		__setscheduler(rq, p, SCHED_FIFO, MAX_RT_PRIO-1);
 		task_rq_unlock(rq, &flags);
+		get_task_struct(p);
 		cpu_rq(cpu)->migration_thread = p;
 		break;
 
@@ -7524,6 +7517,7 @@ migration_call(struct notifier_block *nfb, unsigned long action, void *hcpu)
 		kthread_bind(cpu_rq(cpu)->migration_thread,
 			     cpumask_any(cpu_online_mask));
 		kthread_stop(cpu_rq(cpu)->migration_thread);
+		put_task_struct(cpu_rq(cpu)->migration_thread);
 		cpu_rq(cpu)->migration_thread = NULL;
 		break;
 
@@ -7533,6 +7527,7 @@ migration_call(struct notifier_block *nfb, unsigned long action, void *hcpu)
 		migrate_live_tasks(cpu);
 		rq = cpu_rq(cpu);
 		kthread_stop(rq->migration_thread);
+		put_task_struct(rq->migration_thread);
 		rq->migration_thread = NULL;
 		/* Idle task back to normal (off runqueue, low prio) */
 		spin_lock_irq(&rq->lock);
@@ -7828,7 +7823,7 @@ static void rq_attach_root(struct rq *rq, struct root_domain *rd)
 		free_rootdomain(old_rd);
 }
 
-static int __init_refok init_rootdomain(struct root_domain *rd, bool bootmem)
+static int init_rootdomain(struct root_domain *rd, bool bootmem)
 {
 	gfp_t gfp = GFP_KERNEL;
 
diff --git a/kernel/sched_cpupri.c b/kernel/sched_cpupri.c
index 7deffc9f0e5..e6c251790dd 100644
--- a/kernel/sched_cpupri.c
+++ b/kernel/sched_cpupri.c
@@ -152,7 +152,7 @@ void cpupri_set(struct cpupri *cp, int cpu, int newpri)
  *
  * Returns: -ENOMEM if memory fails.
  */
-int __init_refok cpupri_init(struct cpupri *cp, bool bootmem)
+int cpupri_init(struct cpupri *cp, bool bootmem)
 {
 	gfp_t gfp = GFP_KERNEL;
 	int i;
diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c
index 467ca72f165..70c7e0b7994 100644
--- a/kernel/sched_debug.c
+++ b/kernel/sched_debug.c
@@ -162,7 +162,7 @@ void print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq)
 {
 	s64 MIN_vruntime = -1, min_vruntime, max_vruntime = -1,
 		spread, rq0_min_vruntime, spread0;
-	struct rq *rq = &per_cpu(runqueues, cpu);
+	struct rq *rq = cpu_rq(cpu);
 	struct sched_entity *last;
 	unsigned long flags;
 
@@ -191,7 +191,7 @@ void print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq)
 	if (last)
 		max_vruntime = last->vruntime;
 	min_vruntime = cfs_rq->min_vruntime;
-	rq0_min_vruntime = per_cpu(runqueues, 0).cfs.min_vruntime;
+	rq0_min_vruntime = cpu_rq(0)->cfs.min_vruntime;
 	spin_unlock_irqrestore(&rq->lock, flags);
 	SEQ_printf(m, "  .%-30s: %Ld.%06ld\n", "MIN_vruntime",
 			SPLIT_NS(MIN_vruntime));
@@ -248,7 +248,7 @@ void print_rt_rq(struct seq_file *m, int cpu, struct rt_rq *rt_rq)
 
 static void print_cpu(struct seq_file *m, int cpu)
 {
-	struct rq *rq = &per_cpu(runqueues, cpu);
+	struct rq *rq = cpu_rq(cpu);
 
 #ifdef CONFIG_X86
 	{
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 5f9650e8fe7..ba7fd6e9556 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -430,12 +430,13 @@ static u64 sched_slice(struct cfs_rq *cfs_rq, struct sched_entity *se)
 
 	for_each_sched_entity(se) {
 		struct load_weight *load;
+		struct load_weight lw;
 
 		cfs_rq = cfs_rq_of(se);
 		load = &cfs_rq->load;
 
 		if (unlikely(!se->on_rq)) {
-			struct load_weight lw = cfs_rq->load;
+			lw = cfs_rq->load;
 
 			update_load_add(&lw, se->load.weight);
 			load = &lw;
diff --git a/kernel/signal.c b/kernel/signal.c
index d81f4952eeb..ccf1ceedaeb 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1410,7 +1410,7 @@ int do_notify_parent(struct task_struct *tsk, int sig)
  	/* do_notify_parent_cldstop should have been called instead.  */
  	BUG_ON(task_is_stopped_or_traced(tsk));
 
-	BUG_ON(!tsk->ptrace &&
+	BUG_ON(!task_ptrace(tsk) &&
 	       (tsk->group_leader != tsk || !thread_group_empty(tsk)));
 
 	info.si_signo = sig;
@@ -1449,7 +1449,7 @@ int do_notify_parent(struct task_struct *tsk, int sig)
 
 	psig = tsk->parent->sighand;
 	spin_lock_irqsave(&psig->siglock, flags);
-	if (!tsk->ptrace && sig == SIGCHLD &&
+	if (!task_ptrace(tsk) && sig == SIGCHLD &&
 	    (psig->action[SIGCHLD-1].sa.sa_handler == SIG_IGN ||
 	     (psig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDWAIT))) {
 		/*
@@ -1486,7 +1486,7 @@ static void do_notify_parent_cldstop(struct task_struct *tsk, int why)
 	struct task_struct *parent;
 	struct sighand_struct *sighand;
 
-	if (tsk->ptrace & PT_PTRACED)
+	if (task_ptrace(tsk))
 		parent = tsk->parent;
 	else {
 		tsk = tsk->group_leader;
@@ -1499,7 +1499,7 @@ static void do_notify_parent_cldstop(struct task_struct *tsk, int why)
 	 * see comment in do_notify_parent() abot the following 3 lines
 	 */
 	rcu_read_lock();
-	info.si_pid = task_pid_nr_ns(tsk, tsk->parent->nsproxy->pid_ns);
+	info.si_pid = task_pid_nr_ns(tsk, parent->nsproxy->pid_ns);
 	info.si_uid = __task_cred(tsk)->uid;
 	rcu_read_unlock();
 
@@ -1535,7 +1535,7 @@ static void do_notify_parent_cldstop(struct task_struct *tsk, int why)
 
 static inline int may_ptrace_stop(void)
 {
-	if (!likely(current->ptrace & PT_PTRACED))
+	if (!likely(task_ptrace(current)))
 		return 0;
 	/*
 	 * Are we in the middle of do_coredump?
@@ -1753,7 +1753,7 @@ static int do_signal_stop(int signr)
 static int ptrace_signal(int signr, siginfo_t *info,
 			 struct pt_regs *regs, void *cookie)
 {
-	if (!(current->ptrace & PT_PTRACED))
+	if (!task_ptrace(current))
 		return signr;
 
 	ptrace_signal_deliver(regs, cookie);
diff --git a/kernel/softirq.c b/kernel/softirq.c
index b41fb710e11..3a94905fa5d 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -213,6 +213,7 @@ restart:
 	do {
 		if (pending & 1) {
 			int prev_count = preempt_count();
+			kstat_incr_softirqs_this_cpu(h - softirq_vec);
 
 			trace_softirq_entry(h, softirq_vec);
 			h->action(h);
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index ab462b9968d..62e4ff9968b 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -2283,7 +2283,7 @@ static int __do_proc_dointvec(void *tbl_data, struct ctl_table *table,
 		  void *data)
 {
 #define TMPBUFLEN 21
-	int *i, vleft, first=1, neg, val;
+	int *i, vleft, first = 1, neg;
 	unsigned long lval;
 	size_t left, len;
 	
@@ -2336,8 +2336,6 @@ static int __do_proc_dointvec(void *tbl_data, struct ctl_table *table,
 			len = p-buf;
 			if ((len < left) && *p && !isspace(*p))
 				break;
-			if (neg)
-				val = -val;
 			s += len;
 			left -= len;
 
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 2aff39c6f10..e0f59a21c06 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -222,6 +222,15 @@ void tick_nohz_stop_sched_tick(int inidle)
 
 	cpu = smp_processor_id();
 	ts = &per_cpu(tick_cpu_sched, cpu);
+
+	/*
+	 * Call to tick_nohz_start_idle stops the last_update_time from being
+	 * updated. Thus, it must not be called in the event we are called from
+	 * irq_exit() with the prior state different than idle.
+	 */
+	if (!inidle && !ts->inidle)
+		goto end;
+
 	now = tick_nohz_start_idle(ts);
 
 	/*
@@ -239,9 +248,6 @@ void tick_nohz_stop_sched_tick(int inidle)
 	if (unlikely(ts->nohz_mode == NOHZ_MODE_INACTIVE))
 		goto end;
 
-	if (!inidle && !ts->inidle)
-		goto end;
-
 	ts->inidle = 1;
 
 	if (need_resched())
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index 61071fecc82..1551f47e766 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -18,6 +18,13 @@ config HAVE_FUNCTION_TRACER
 config HAVE_FUNCTION_GRAPH_TRACER
 	bool
 
+config HAVE_FUNCTION_GRAPH_FP_TEST
+	bool
+	help
+	 An arch may pass in a unique value (frame pointer) to both the
+	 entering and exiting of a function. On exit, the value is compared
+	 and if it does not match, then it will panic the kernel.
+
 config HAVE_FUNCTION_TRACE_MCOUNT_TEST
 	bool
 	help
@@ -121,6 +128,7 @@ config FUNCTION_GRAPH_TRACER
 	bool "Kernel Function Graph Tracer"
 	depends on HAVE_FUNCTION_GRAPH_TRACER
 	depends on FUNCTION_TRACER
+	depends on !X86_32 || !CC_OPTIMIZE_FOR_SIZE
 	default y
 	help
 	  Enable the kernel to trace a function at both its return
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index bb60732ade0..3718d55fb4c 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -1224,6 +1224,13 @@ static void ftrace_shutdown(int command)
 		return;
 
 	ftrace_start_up--;
+	/*
+	 * Just warn in case of unbalance, no need to kill ftrace, it's not
+	 * critical but the ftrace_call callers may be never nopped again after
+	 * further ftrace uses.
+	 */
+	WARN_ON_ONCE(ftrace_start_up < 0);
+
 	if (!ftrace_start_up)
 		command |= FTRACE_DISABLE_CALLS;
 
diff --git a/kernel/trace/kmemtrace.c b/kernel/trace/kmemtrace.c
index 86cdf671d7e..1edaa9516e8 100644
--- a/kernel/trace/kmemtrace.c
+++ b/kernel/trace/kmemtrace.c
@@ -186,7 +186,7 @@ static int kmem_trace_init(struct trace_array *tr)
 	int cpu;
 	kmemtrace_array = tr;
 
-	for_each_cpu_mask(cpu, cpu_possible_map)
+	for_each_cpu(cpu, cpu_possible_mask)
 		tracing_reset(tr, cpu);
 
 	kmemtrace_start_probes();
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index dc4dc70171c..04dac263825 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -206,6 +206,7 @@ EXPORT_SYMBOL_GPL(tracing_is_on);
 #define RB_EVNT_HDR_SIZE (offsetof(struct ring_buffer_event, array))
 #define RB_ALIGNMENT		4U
 #define RB_MAX_SMALL_DATA	(RB_ALIGNMENT * RINGBUF_TYPE_DATA_TYPE_LEN_MAX)
+#define RB_EVNT_MIN_SIZE	8U	/* two 32bit words */
 
 /* define RINGBUF_TYPE_DATA for 'case RINGBUF_TYPE_DATA:' */
 #define RINGBUF_TYPE_DATA 0 ... RINGBUF_TYPE_DATA_TYPE_LEN_MAX
@@ -415,6 +416,8 @@ struct ring_buffer_per_cpu {
 	unsigned long			overrun;
 	unsigned long			read;
 	local_t				entries;
+	local_t				committing;
+	local_t				commits;
 	u64				write_stamp;
 	u64				read_stamp;
 	atomic_t			record_disabled;
@@ -618,12 +621,6 @@ static void rb_free_cpu_buffer(struct ring_buffer_per_cpu *cpu_buffer)
 	kfree(cpu_buffer);
 }
 
-/*
- * Causes compile errors if the struct buffer_page gets bigger
- * than the struct page.
- */
-extern int ring_buffer_page_too_big(void);
-
 #ifdef CONFIG_HOTPLUG_CPU
 static int rb_cpu_notify(struct notifier_block *self,
 			 unsigned long action, void *hcpu);
@@ -646,11 +643,6 @@ struct ring_buffer *__ring_buffer_alloc(unsigned long size, unsigned flags,
 	int bsize;
 	int cpu;
 
-	/* Paranoid! Optimizes out when all is well */
-	if (sizeof(struct buffer_page) > sizeof(struct page))
-		ring_buffer_page_too_big();
-
-
 	/* keep it in its own cache line */
 	buffer = kzalloc(ALIGN(sizeof(*buffer), cache_line_size()),
 			 GFP_KERNEL);
@@ -666,8 +658,8 @@ struct ring_buffer *__ring_buffer_alloc(unsigned long size, unsigned flags,
 	buffer->reader_lock_key = key;
 
 	/* need at least two pages */
-	if (buffer->pages == 1)
-		buffer->pages++;
+	if (buffer->pages < 2)
+		buffer->pages = 2;
 
 	/*
 	 * In case of non-hotplug cpu, if the ring-buffer is allocated
@@ -1011,12 +1003,12 @@ rb_event_index(struct ring_buffer_event *event)
 {
 	unsigned long addr = (unsigned long)event;
 
-	return (addr & ~PAGE_MASK) - (PAGE_SIZE - BUF_PAGE_SIZE);
+	return (addr & ~PAGE_MASK) - BUF_PAGE_HDR_SIZE;
 }
 
 static inline int
-rb_is_commit(struct ring_buffer_per_cpu *cpu_buffer,
-	     struct ring_buffer_event *event)
+rb_event_is_commit(struct ring_buffer_per_cpu *cpu_buffer,
+		   struct ring_buffer_event *event)
 {
 	unsigned long addr = (unsigned long)event;
 	unsigned long index;
@@ -1029,31 +1021,6 @@ rb_is_commit(struct ring_buffer_per_cpu *cpu_buffer,
 }
 
 static void
-rb_set_commit_event(struct ring_buffer_per_cpu *cpu_buffer,
-		    struct ring_buffer_event *event)
-{
-	unsigned long addr = (unsigned long)event;
-	unsigned long index;
-
-	index = rb_event_index(event);
-	addr &= PAGE_MASK;
-
-	while (cpu_buffer->commit_page->page != (void *)addr) {
-		if (RB_WARN_ON(cpu_buffer,
-			  cpu_buffer->commit_page == cpu_buffer->tail_page))
-			return;
-		cpu_buffer->commit_page->page->commit =
-			cpu_buffer->commit_page->write;
-		rb_inc_page(cpu_buffer, &cpu_buffer->commit_page);
-		cpu_buffer->write_stamp =
-			cpu_buffer->commit_page->page->time_stamp;
-	}
-
-	/* Now set the commit to the event's index */
-	local_set(&cpu_buffer->commit_page->page->commit, index);
-}
-
-static void
 rb_set_commit_to_write(struct ring_buffer_per_cpu *cpu_buffer)
 {
 	/*
@@ -1171,6 +1138,60 @@ static unsigned rb_calculate_event_length(unsigned length)
 	return length;
 }
 
+static inline void
+rb_reset_tail(struct ring_buffer_per_cpu *cpu_buffer,
+	      struct buffer_page *tail_page,
+	      unsigned long tail, unsigned long length)
+{
+	struct ring_buffer_event *event;
+
+	/*
+	 * Only the event that crossed the page boundary
+	 * must fill the old tail_page with padding.
+	 */
+	if (tail >= BUF_PAGE_SIZE) {
+		local_sub(length, &tail_page->write);
+		return;
+	}
+
+	event = __rb_page_index(tail_page, tail);
+	kmemcheck_annotate_bitfield(event, bitfield);
+
+	/*
+	 * If this event is bigger than the minimum size, then
+	 * we need to be careful that we don't subtract the
+	 * write counter enough to allow another writer to slip
+	 * in on this page.
+	 * We put in a discarded commit instead, to make sure
+	 * that this space is not used again.
+	 *
+	 * If we are less than the minimum size, we don't need to
+	 * worry about it.
+	 */
+	if (tail > (BUF_PAGE_SIZE - RB_EVNT_MIN_SIZE)) {
+		/* No room for any events */
+
+		/* Mark the rest of the page with padding */
+		rb_event_set_padding(event);
+
+		/* Set the write back to the previous setting */
+		local_sub(length, &tail_page->write);
+		return;
+	}
+
+	/* Put in a discarded event */
+	event->array[0] = (BUF_PAGE_SIZE - tail) - RB_EVNT_HDR_SIZE;
+	event->type_len = RINGBUF_TYPE_PADDING;
+	/* time delta must be non zero */
+	event->time_delta = 1;
+	/* Account for this as an entry */
+	local_inc(&tail_page->entries);
+	local_inc(&cpu_buffer->entries);
+
+	/* Set write to end of buffer */
+	length = (tail + length) - BUF_PAGE_SIZE;
+	local_sub(length, &tail_page->write);
+}
 
 static struct ring_buffer_event *
 rb_move_tail(struct ring_buffer_per_cpu *cpu_buffer,
@@ -1180,7 +1201,6 @@ rb_move_tail(struct ring_buffer_per_cpu *cpu_buffer,
 {
 	struct buffer_page *next_page, *head_page, *reader_page;
 	struct ring_buffer *buffer = cpu_buffer->buffer;
-	struct ring_buffer_event *event;
 	bool lock_taken = false;
 	unsigned long flags;
 
@@ -1265,27 +1285,7 @@ rb_move_tail(struct ring_buffer_per_cpu *cpu_buffer,
 		cpu_buffer->tail_page->page->time_stamp = *ts;
 	}
 
-	/*
-	 * The actual tail page has moved forward.
-	 */
-	if (tail < BUF_PAGE_SIZE) {
-		/* Mark the rest of the page with padding */
-		event = __rb_page_index(tail_page, tail);
-		kmemcheck_annotate_bitfield(event, bitfield);
-		rb_event_set_padding(event);
-	}
-
-	/* Set the write back to the previous setting */
-	local_sub(length, &tail_page->write);
-
-	/*
-	 * If this was a commit entry that failed,
-	 * increment that too
-	 */
-	if (tail_page == cpu_buffer->commit_page &&
-	    tail == rb_commit_index(cpu_buffer)) {
-		rb_set_commit_to_write(cpu_buffer);
-	}
+	rb_reset_tail(cpu_buffer, tail_page, tail, length);
 
 	__raw_spin_unlock(&cpu_buffer->lock);
 	local_irq_restore(flags);
@@ -1295,7 +1295,7 @@ rb_move_tail(struct ring_buffer_per_cpu *cpu_buffer,
 
  out_reset:
 	/* reset write */
-	local_sub(length, &tail_page->write);
+	rb_reset_tail(cpu_buffer, tail_page, tail, length);
 
 	if (likely(lock_taken))
 		__raw_spin_unlock(&cpu_buffer->lock);
@@ -1325,9 +1325,6 @@ __rb_reserve_next(struct ring_buffer_per_cpu *cpu_buffer,
 
 	/* We reserved something on the buffer */
 
-	if (RB_WARN_ON(cpu_buffer, write > BUF_PAGE_SIZE))
-		return NULL;
-
 	event = __rb_page_index(tail_page, tail);
 	kmemcheck_annotate_bitfield(event, bitfield);
 	rb_update_event(event, type, length);
@@ -1337,11 +1334,11 @@ __rb_reserve_next(struct ring_buffer_per_cpu *cpu_buffer,
 		local_inc(&tail_page->entries);
 
 	/*
-	 * If this is a commit and the tail is zero, then update
-	 * this page's time stamp.
+	 * If this is the first commit on the page, then update
+	 * its timestamp.
 	 */
-	if (!tail && rb_is_commit(cpu_buffer, event))
-		cpu_buffer->commit_page->page->time_stamp = *ts;
+	if (!tail)
+		tail_page->page->time_stamp = *ts;
 
 	return event;
 }
@@ -1410,16 +1407,16 @@ rb_add_time_stamp(struct ring_buffer_per_cpu *cpu_buffer,
 		return -EAGAIN;
 
 	/* Only a commited time event can update the write stamp */
-	if (rb_is_commit(cpu_buffer, event)) {
+	if (rb_event_is_commit(cpu_buffer, event)) {
 		/*
-		 * If this is the first on the page, then we need to
-		 * update the page itself, and just put in a zero.
+		 * If this is the first on the page, then it was
+		 * updated with the page itself. Try to discard it
+		 * and if we can't just make it zero.
 		 */
 		if (rb_event_index(event)) {
 			event->time_delta = *delta & TS_MASK;
 			event->array[0] = *delta >> TS_SHIFT;
 		} else {
-			cpu_buffer->commit_page->page->time_stamp = *ts;
 			/* try to discard, since we do not need this */
 			if (!rb_try_to_discard(cpu_buffer, event)) {
 				/* nope, just zero it */
@@ -1445,6 +1442,44 @@ rb_add_time_stamp(struct ring_buffer_per_cpu *cpu_buffer,
 	return ret;
 }
 
+static void rb_start_commit(struct ring_buffer_per_cpu *cpu_buffer)
+{
+	local_inc(&cpu_buffer->committing);
+	local_inc(&cpu_buffer->commits);
+}
+
+static void rb_end_commit(struct ring_buffer_per_cpu *cpu_buffer)
+{
+	unsigned long commits;
+
+	if (RB_WARN_ON(cpu_buffer,
+		       !local_read(&cpu_buffer->committing)))
+		return;
+
+ again:
+	commits = local_read(&cpu_buffer->commits);
+	/* synchronize with interrupts */
+	barrier();
+	if (local_read(&cpu_buffer->committing) == 1)
+		rb_set_commit_to_write(cpu_buffer);
+
+	local_dec(&cpu_buffer->committing);
+
+	/* synchronize with interrupts */
+	barrier();
+
+	/*
+	 * Need to account for interrupts coming in between the
+	 * updating of the commit page and the clearing of the
+	 * committing counter.
+	 */
+	if (unlikely(local_read(&cpu_buffer->commits) != commits) &&
+	    !local_read(&cpu_buffer->committing)) {
+		local_inc(&cpu_buffer->committing);
+		goto again;
+	}
+}
+
 static struct ring_buffer_event *
 rb_reserve_next_event(struct ring_buffer_per_cpu *cpu_buffer,
 		      unsigned long length)
@@ -1454,6 +1489,8 @@ rb_reserve_next_event(struct ring_buffer_per_cpu *cpu_buffer,
 	int commit = 0;
 	int nr_loops = 0;
 
+	rb_start_commit(cpu_buffer);
+
 	length = rb_calculate_event_length(length);
  again:
 	/*
@@ -1466,7 +1503,7 @@ rb_reserve_next_event(struct ring_buffer_per_cpu *cpu_buffer,
 	 * Bail!
 	 */
 	if (RB_WARN_ON(cpu_buffer, ++nr_loops > 1000))
-		return NULL;
+		goto out_fail;
 
 	ts = rb_time_stamp(cpu_buffer->buffer, cpu_buffer->cpu);
 
@@ -1497,7 +1534,7 @@ rb_reserve_next_event(struct ring_buffer_per_cpu *cpu_buffer,
 
 			commit = rb_add_time_stamp(cpu_buffer, &ts, &delta);
 			if (commit == -EBUSY)
-				return NULL;
+				goto out_fail;
 
 			if (commit == -EAGAIN)
 				goto again;
@@ -1511,28 +1548,19 @@ rb_reserve_next_event(struct ring_buffer_per_cpu *cpu_buffer,
 	if (unlikely(PTR_ERR(event) == -EAGAIN))
 		goto again;
 
-	if (!event) {
-		if (unlikely(commit))
-			/*
-			 * Ouch! We needed a timestamp and it was commited. But
-			 * we didn't get our event reserved.
-			 */
-			rb_set_commit_to_write(cpu_buffer);
-		return NULL;
-	}
+	if (!event)
+		goto out_fail;
 
-	/*
-	 * If the timestamp was commited, make the commit our entry
-	 * now so that we will update it when needed.
-	 */
-	if (unlikely(commit))
-		rb_set_commit_event(cpu_buffer, event);
-	else if (!rb_is_commit(cpu_buffer, event))
+	if (!rb_event_is_commit(cpu_buffer, event))
 		delta = 0;
 
 	event->time_delta = delta;
 
 	return event;
+
+ out_fail:
+	rb_end_commit(cpu_buffer);
+	return NULL;
 }
 
 #define TRACE_RECURSIVE_DEPTH 16
@@ -1642,13 +1670,14 @@ static void rb_commit(struct ring_buffer_per_cpu *cpu_buffer,
 {
 	local_inc(&cpu_buffer->entries);
 
-	/* Only process further if we own the commit */
-	if (!rb_is_commit(cpu_buffer, event))
-		return;
-
-	cpu_buffer->write_stamp += event->time_delta;
+	/*
+	 * The event first in the commit queue updates the
+	 * time stamp.
+	 */
+	if (rb_event_is_commit(cpu_buffer, event))
+		cpu_buffer->write_stamp += event->time_delta;
 
-	rb_set_commit_to_write(cpu_buffer);
+	rb_end_commit(cpu_buffer);
 }
 
 /**
@@ -1737,15 +1766,15 @@ void ring_buffer_discard_commit(struct ring_buffer *buffer,
 	/* The event is discarded regardless */
 	rb_event_discard(event);
 
+	cpu = smp_processor_id();
+	cpu_buffer = buffer->buffers[cpu];
+
 	/*
 	 * This must only be called if the event has not been
 	 * committed yet. Thus we can assume that preemption
 	 * is still disabled.
 	 */
-	RB_WARN_ON(buffer, preemptible());
-
-	cpu = smp_processor_id();
-	cpu_buffer = buffer->buffers[cpu];
+	RB_WARN_ON(buffer, !local_read(&cpu_buffer->committing));
 
 	if (!rb_try_to_discard(cpu_buffer, event))
 		goto out;
@@ -1756,13 +1785,7 @@ void ring_buffer_discard_commit(struct ring_buffer *buffer,
 	 */
 	local_inc(&cpu_buffer->entries);
  out:
-	/*
-	 * If a write came in and pushed the tail page
-	 * we still need to update the commit pointer
-	 * if we were the commit.
-	 */
-	if (rb_is_commit(cpu_buffer, event))
-		rb_set_commit_to_write(cpu_buffer);
+	rb_end_commit(cpu_buffer);
 
 	trace_recursive_unlock();
 
@@ -2446,6 +2469,21 @@ rb_iter_peek(struct ring_buffer_iter *iter, u64 *ts)
 }
 EXPORT_SYMBOL_GPL(ring_buffer_iter_peek);
 
+static inline int rb_ok_to_lock(void)
+{
+	/*
+	 * If an NMI die dumps out the content of the ring buffer
+	 * do not grab locks. We also permanently disable the ring
+	 * buffer too. A one time deal is all you get from reading
+	 * the ring buffer from an NMI.
+	 */
+	if (likely(!in_nmi() && !oops_in_progress))
+		return 1;
+
+	tracing_off_permanent();
+	return 0;
+}
+
 /**
  * ring_buffer_peek - peek at the next event to be read
  * @buffer: The ring buffer to read
@@ -2461,14 +2499,20 @@ ring_buffer_peek(struct ring_buffer *buffer, int cpu, u64 *ts)
 	struct ring_buffer_per_cpu *cpu_buffer = buffer->buffers[cpu];
 	struct ring_buffer_event *event;
 	unsigned long flags;
+	int dolock;
 
 	if (!cpumask_test_cpu(cpu, buffer->cpumask))
 		return NULL;
 
+	dolock = rb_ok_to_lock();
  again:
-	spin_lock_irqsave(&cpu_buffer->reader_lock, flags);
+	local_irq_save(flags);
+	if (dolock)
+		spin_lock(&cpu_buffer->reader_lock);
 	event = rb_buffer_peek(buffer, cpu, ts);
-	spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
+	if (dolock)
+		spin_unlock(&cpu_buffer->reader_lock);
+	local_irq_restore(flags);
 
 	if (event && event->type_len == RINGBUF_TYPE_PADDING) {
 		cpu_relax();
@@ -2520,6 +2564,9 @@ ring_buffer_consume(struct ring_buffer *buffer, int cpu, u64 *ts)
 	struct ring_buffer_per_cpu *cpu_buffer;
 	struct ring_buffer_event *event = NULL;
 	unsigned long flags;
+	int dolock;
+
+	dolock = rb_ok_to_lock();
 
  again:
 	/* might be called in atomic */
@@ -2529,7 +2576,9 @@ ring_buffer_consume(struct ring_buffer *buffer, int cpu, u64 *ts)
 		goto out;
 
 	cpu_buffer = buffer->buffers[cpu];
-	spin_lock_irqsave(&cpu_buffer->reader_lock, flags);
+	local_irq_save(flags);
+	if (dolock)
+		spin_lock(&cpu_buffer->reader_lock);
 
 	event = rb_buffer_peek(buffer, cpu, ts);
 	if (!event)
@@ -2538,7 +2587,9 @@ ring_buffer_consume(struct ring_buffer *buffer, int cpu, u64 *ts)
 	rb_advance_reader(cpu_buffer);
 
  out_unlock:
-	spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
+	if (dolock)
+		spin_unlock(&cpu_buffer->reader_lock);
+	local_irq_restore(flags);
 
  out:
 	preempt_enable();
@@ -2680,6 +2731,8 @@ rb_reset_cpu(struct ring_buffer_per_cpu *cpu_buffer)
 	cpu_buffer->overrun = 0;
 	cpu_buffer->read = 0;
 	local_set(&cpu_buffer->entries, 0);
+	local_set(&cpu_buffer->committing, 0);
+	local_set(&cpu_buffer->commits, 0);
 
 	cpu_buffer->write_stamp = 0;
 	cpu_buffer->read_stamp = 0;
@@ -2734,12 +2787,25 @@ EXPORT_SYMBOL_GPL(ring_buffer_reset);
 int ring_buffer_empty(struct ring_buffer *buffer)
 {
 	struct ring_buffer_per_cpu *cpu_buffer;
+	unsigned long flags;
+	int dolock;
 	int cpu;
+	int ret;
+
+	dolock = rb_ok_to_lock();
 
 	/* yes this is racy, but if you don't like the race, lock the buffer */
 	for_each_buffer_cpu(buffer, cpu) {
 		cpu_buffer = buffer->buffers[cpu];
-		if (!rb_per_cpu_empty(cpu_buffer))
+		local_irq_save(flags);
+		if (dolock)
+			spin_lock(&cpu_buffer->reader_lock);
+		ret = rb_per_cpu_empty(cpu_buffer);
+		if (dolock)
+			spin_unlock(&cpu_buffer->reader_lock);
+		local_irq_restore(flags);
+
+		if (!ret)
 			return 0;
 	}
 
@@ -2755,14 +2821,23 @@ EXPORT_SYMBOL_GPL(ring_buffer_empty);
 int ring_buffer_empty_cpu(struct ring_buffer *buffer, int cpu)
 {
 	struct ring_buffer_per_cpu *cpu_buffer;
+	unsigned long flags;
+	int dolock;
 	int ret;
 
 	if (!cpumask_test_cpu(cpu, buffer->cpumask))
 		return 1;
 
+	dolock = rb_ok_to_lock();
+
 	cpu_buffer = buffer->buffers[cpu];
+	local_irq_save(flags);
+	if (dolock)
+		spin_lock(&cpu_buffer->reader_lock);
 	ret = rb_per_cpu_empty(cpu_buffer);
-
+	if (dolock)
+		spin_unlock(&cpu_buffer->reader_lock);
+	local_irq_restore(flags);
 
 	return ret;
 }
@@ -3108,7 +3183,7 @@ static int rb_cpu_notify(struct notifier_block *self,
 	switch (action) {
 	case CPU_UP_PREPARE:
 	case CPU_UP_PREPARE_FROZEN:
-		if (cpu_isset(cpu, *buffer->cpumask))
+		if (cpumask_test_cpu(cpu, buffer->cpumask))
 			return NOTIFY_OK;
 
 		buffer->buffers[cpu] =
@@ -3119,7 +3194,7 @@ static int rb_cpu_notify(struct notifier_block *self,
 			return NOTIFY_OK;
 		}
 		smp_wmb();
-		cpu_set(cpu, *buffer->cpumask);
+		cpumask_set_cpu(cpu, buffer->cpumask);
 		break;
 	case CPU_DOWN_PREPARE:
 	case CPU_DOWN_PREPARE_FROZEN:
diff --git a/kernel/trace/ring_buffer_benchmark.c b/kernel/trace/ring_buffer_benchmark.c
index 8d68e149a8b..573d3cc762c 100644
--- a/kernel/trace/ring_buffer_benchmark.c
+++ b/kernel/trace/ring_buffer_benchmark.c
@@ -102,8 +102,10 @@ static enum event_status read_page(int cpu)
 			event = (void *)&rpage->data[i];
 			switch (event->type_len) {
 			case RINGBUF_TYPE_PADDING:
-				/* We don't expect any padding */
-				KILL_TEST();
+				/* failed writes may be discarded events */
+				if (!event->time_delta)
+					KILL_TEST();
+				inc = event->array[0] + 4;
 				break;
 			case RINGBUF_TYPE_TIME_EXTEND:
 				inc = 8;
@@ -119,7 +121,7 @@ static enum event_status read_page(int cpu)
 					KILL_TEST();
 					break;
 				}
-				inc = event->array[0];
+				inc = event->array[0] + 4;
 				break;
 			default:
 				entry = ring_buffer_event_data(event);
@@ -201,7 +203,7 @@ static void ring_buffer_producer(void)
 	 * Hammer the buffer for 10 secs (this may
 	 * make the system stall)
 	 */
-	pr_info("Starting ring buffer hammer\n");
+	trace_printk("Starting ring buffer hammer\n");
 	do_gettimeofday(&start_tv);
 	do {
 		struct ring_buffer_event *event;
@@ -237,7 +239,7 @@ static void ring_buffer_producer(void)
 #endif
 
 	} while (end_tv.tv_sec < (start_tv.tv_sec + RUN_TIME) && !kill_test);
-	pr_info("End ring buffer hammer\n");
+	trace_printk("End ring buffer hammer\n");
 
 	if (consumer) {
 		/* Init both completions here to avoid races */
@@ -260,49 +262,50 @@ static void ring_buffer_producer(void)
 	overruns = ring_buffer_overruns(buffer);
 
 	if (kill_test)
-		pr_info("ERROR!\n");
-	pr_info("Time:     %lld (usecs)\n", time);
-	pr_info("Overruns: %lld\n", overruns);
+		trace_printk("ERROR!\n");
+	trace_printk("Time:     %lld (usecs)\n", time);
+	trace_printk("Overruns: %lld\n", overruns);
 	if (disable_reader)
-		pr_info("Read:     (reader disabled)\n");
+		trace_printk("Read:     (reader disabled)\n");
 	else
-		pr_info("Read:     %ld  (by %s)\n", read,
+		trace_printk("Read:     %ld  (by %s)\n", read,
 			read_events ? "events" : "pages");
-	pr_info("Entries:  %lld\n", entries);
-	pr_info("Total:    %lld\n", entries + overruns + read);
-	pr_info("Missed:   %ld\n", missed);
-	pr_info("Hit:      %ld\n", hit);
+	trace_printk("Entries:  %lld\n", entries);
+	trace_printk("Total:    %lld\n", entries + overruns + read);
+	trace_printk("Missed:   %ld\n", missed);
+	trace_printk("Hit:      %ld\n", hit);
 
 	/* Convert time from usecs to millisecs */
 	do_div(time, USEC_PER_MSEC);
 	if (time)
 		hit /= (long)time;
 	else
-		pr_info("TIME IS ZERO??\n");
+		trace_printk("TIME IS ZERO??\n");
 
-	pr_info("Entries per millisec: %ld\n", hit);
+	trace_printk("Entries per millisec: %ld\n", hit);
 
 	if (hit) {
 		/* Calculate the average time in nanosecs */
 		avg = NSEC_PER_MSEC / hit;
-		pr_info("%ld ns per entry\n", avg);
+		trace_printk("%ld ns per entry\n", avg);
 	}
 
 	if (missed) {
 		if (time)
 			missed /= (long)time;
 
-		pr_info("Total iterations per millisec: %ld\n", hit + missed);
+		trace_printk("Total iterations per millisec: %ld\n",
+			     hit + missed);
 
 		/* it is possible that hit + missed will overflow and be zero */
 		if (!(hit + missed)) {
-			pr_info("hit + missed overflowed and totalled zero!\n");
+			trace_printk("hit + missed overflowed and totalled zero!\n");
 			hit--; /* make it non zero */
 		}
 
 		/* Caculate the average time in nanosecs */
 		avg = NSEC_PER_MSEC / (hit + missed);
-		pr_info("%ld ns per entry\n", avg);
+		trace_printk("%ld ns per entry\n", avg);
 	}
 }
 
@@ -353,7 +356,7 @@ static int ring_buffer_producer_thread(void *arg)
 
 		ring_buffer_producer();
 
-		pr_info("Sleeping for 10 secs\n");
+		trace_printk("Sleeping for 10 secs\n");
 		set_current_state(TASK_INTERRUPTIBLE);
 		schedule_timeout(HZ * SLEEP_TIME);
 		__set_current_state(TASK_RUNNING);
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index c1878bfb2e1..076fa6f0ee4 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -2191,11 +2191,12 @@ tracing_cpumask_write(struct file *filp, const char __user *ubuf,
 	if (!alloc_cpumask_var(&tracing_cpumask_new, GFP_KERNEL))
 		return -ENOMEM;
 
-	mutex_lock(&tracing_cpumask_update_lock);
 	err = cpumask_parse_user(ubuf, count, tracing_cpumask_new);
 	if (err)
 		goto err_unlock;
 
+	mutex_lock(&tracing_cpumask_update_lock);
+
 	local_irq_disable();
 	__raw_spin_lock(&ftrace_max_lock);
 	for_each_tracing_cpu(cpu) {
@@ -2223,8 +2224,7 @@ tracing_cpumask_write(struct file *filp, const char __user *ubuf,
 	return count;
 
 err_unlock:
-	mutex_unlock(&tracing_cpumask_update_lock);
-	free_cpumask_var(tracing_cpumask);
+	free_cpumask_var(tracing_cpumask_new);
 
 	return err;
 }
@@ -3626,7 +3626,7 @@ tracing_stats_read(struct file *filp, char __user *ubuf,
 	struct trace_seq *s;
 	unsigned long cnt;
 
-	s = kmalloc(sizeof(*s), GFP_ATOMIC);
+	s = kmalloc(sizeof(*s), GFP_KERNEL);
 	if (!s)
 		return ENOMEM;
 
diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c
index db6e54bdb59..936c621bbf4 100644
--- a/kernel/trace/trace_events_filter.c
+++ b/kernel/trace/trace_events_filter.c
@@ -27,8 +27,6 @@
 #include "trace.h"
 #include "trace_output.h"
 
-static DEFINE_MUTEX(filter_mutex);
-
 enum filter_op_ids
 {
 	OP_OR,
@@ -178,7 +176,7 @@ static int filter_pred_string(struct filter_pred *pred, void *event,
 static int filter_pred_strloc(struct filter_pred *pred, void *event,
 			      int val1, int val2)
 {
-	int str_loc = *(int *)(event + pred->offset);
+	unsigned short str_loc = *(unsigned short *)(event + pred->offset);
 	char *addr = (char *)(event + str_loc);
 	int cmp, match;
 
@@ -294,12 +292,12 @@ void print_event_filter(struct ftrace_event_call *call, struct trace_seq *s)
 {
 	struct event_filter *filter = call->filter;
 
-	mutex_lock(&filter_mutex);
+	mutex_lock(&event_mutex);
 	if (filter->filter_string)
 		trace_seq_printf(s, "%s\n", filter->filter_string);
 	else
 		trace_seq_printf(s, "none\n");
-	mutex_unlock(&filter_mutex);
+	mutex_unlock(&event_mutex);
 }
 
 void print_subsystem_event_filter(struct event_subsystem *system,
@@ -307,12 +305,12 @@ void print_subsystem_event_filter(struct event_subsystem *system,
 {
 	struct event_filter *filter = system->filter;
 
-	mutex_lock(&filter_mutex);
+	mutex_lock(&event_mutex);
 	if (filter->filter_string)
 		trace_seq_printf(s, "%s\n", filter->filter_string);
 	else
 		trace_seq_printf(s, "none\n");
-	mutex_unlock(&filter_mutex);
+	mutex_unlock(&event_mutex);
 }
 
 static struct ftrace_event_field *
@@ -381,6 +379,7 @@ void destroy_preds(struct ftrace_event_call *call)
 			filter_free_pred(filter->preds[i]);
 	}
 	kfree(filter->preds);
+	kfree(filter->filter_string);
 	kfree(filter);
 	call->filter = NULL;
 }
@@ -433,7 +432,6 @@ static void filter_free_subsystem_preds(struct event_subsystem *system)
 		filter->n_preds = 0;
 	}
 
-	mutex_lock(&event_mutex);
 	list_for_each_entry(call, &ftrace_events, list) {
 		if (!call->define_fields)
 			continue;
@@ -443,7 +441,6 @@ static void filter_free_subsystem_preds(struct event_subsystem *system)
 			remove_filter_string(call->filter);
 		}
 	}
-	mutex_unlock(&event_mutex);
 }
 
 static int filter_add_pred_fn(struct filter_parse_state *ps,
@@ -546,6 +543,7 @@ static int filter_add_pred(struct filter_parse_state *ps,
 	filter_pred_fn_t fn;
 	unsigned long long val;
 	int string_type;
+	int ret;
 
 	pred->fn = filter_pred_none;
 
@@ -581,7 +579,11 @@ static int filter_add_pred(struct filter_parse_state *ps,
 			pred->not = 1;
 		return filter_add_pred_fn(ps, call, pred, fn);
 	} else {
-		if (strict_strtoull(pred->str_val, 0, &val)) {
+		if (field->is_signed)
+			ret = strict_strtoll(pred->str_val, 0, &val);
+		else
+			ret = strict_strtoull(pred->str_val, 0, &val);
+		if (ret) {
 			parse_error(ps, FILT_ERR_ILLEGAL_INTVAL, 0);
 			return -EINVAL;
 		}
@@ -625,7 +627,6 @@ static int filter_add_subsystem_pred(struct filter_parse_state *ps,
 	filter->preds[filter->n_preds] = pred;
 	filter->n_preds++;
 
-	mutex_lock(&event_mutex);
 	list_for_each_entry(call, &ftrace_events, list) {
 
 		if (!call->define_fields)
@@ -636,14 +637,12 @@ static int filter_add_subsystem_pred(struct filter_parse_state *ps,
 
 		err = filter_add_pred(ps, call, pred);
 		if (err) {
-			mutex_unlock(&event_mutex);
 			filter_free_subsystem_preds(system);
 			parse_error(ps, FILT_ERR_BAD_SUBSYS_FILTER, 0);
 			goto out;
 		}
 		replace_filter_string(call->filter, filter_string);
 	}
-	mutex_unlock(&event_mutex);
 out:
 	return err;
 }
@@ -1070,12 +1069,12 @@ int apply_event_filter(struct ftrace_event_call *call, char *filter_string)
 
 	struct filter_parse_state *ps;
 
-	mutex_lock(&filter_mutex);
+	mutex_lock(&event_mutex);
 
 	if (!strcmp(strstrip(filter_string), "0")) {
 		filter_disable_preds(call);
 		remove_filter_string(call->filter);
-		mutex_unlock(&filter_mutex);
+		mutex_unlock(&event_mutex);
 		return 0;
 	}
 
@@ -1103,7 +1102,7 @@ out:
 	postfix_clear(ps);
 	kfree(ps);
 out_unlock:
-	mutex_unlock(&filter_mutex);
+	mutex_unlock(&event_mutex);
 
 	return err;
 }
@@ -1115,12 +1114,12 @@ int apply_subsystem_event_filter(struct event_subsystem *system,
 
 	struct filter_parse_state *ps;
 
-	mutex_lock(&filter_mutex);
+	mutex_lock(&event_mutex);
 
 	if (!strcmp(strstrip(filter_string), "0")) {
 		filter_free_subsystem_preds(system);
 		remove_filter_string(system->filter);
-		mutex_unlock(&filter_mutex);
+		mutex_unlock(&event_mutex);
 		return 0;
 	}
 
@@ -1148,7 +1147,7 @@ out:
 	postfix_clear(ps);
 	kfree(ps);
 out_unlock:
-	mutex_unlock(&filter_mutex);
+	mutex_unlock(&event_mutex);
 
 	return err;
 }
diff --git a/kernel/trace/trace_functions.c b/kernel/trace/trace_functions.c
index c9a0b7df44f..90f13476483 100644
--- a/kernel/trace/trace_functions.c
+++ b/kernel/trace/trace_functions.c
@@ -193,9 +193,11 @@ static void tracing_start_function_trace(void)
 static void tracing_stop_function_trace(void)
 {
 	ftrace_function_enabled = 0;
-	/* OK if they are not registered */
-	unregister_ftrace_function(&trace_stack_ops);
-	unregister_ftrace_function(&trace_ops);
+
+	if (func_flags.val & TRACE_FUNC_OPT_STACK)
+		unregister_ftrace_function(&trace_stack_ops);
+	else
+		unregister_ftrace_function(&trace_ops);
 }
 
 static int func_set_flag(u32 old_flags, u32 bit, int set)
diff --git a/kernel/trace/trace_functions_graph.c b/kernel/trace/trace_functions_graph.c
index 8b592418d8b..d2249abafb5 100644
--- a/kernel/trace/trace_functions_graph.c
+++ b/kernel/trace/trace_functions_graph.c
@@ -57,7 +57,8 @@ static struct tracer_flags tracer_flags = {
 
 /* Add a function return address to the trace stack on thread info.*/
 int
-ftrace_push_return_trace(unsigned long ret, unsigned long func, int *depth)
+ftrace_push_return_trace(unsigned long ret, unsigned long func, int *depth,
+			 unsigned long frame_pointer)
 {
 	unsigned long long calltime;
 	int index;
@@ -85,6 +86,7 @@ ftrace_push_return_trace(unsigned long ret, unsigned long func, int *depth)
 	current->ret_stack[index].func = func;
 	current->ret_stack[index].calltime = calltime;
 	current->ret_stack[index].subtime = 0;
+	current->ret_stack[index].fp = frame_pointer;
 	*depth = index;
 
 	return 0;
@@ -92,7 +94,8 @@ ftrace_push_return_trace(unsigned long ret, unsigned long func, int *depth)
 
 /* Retrieve a function return address to the trace stack on thread info.*/
 static void
-ftrace_pop_return_trace(struct ftrace_graph_ret *trace, unsigned long *ret)
+ftrace_pop_return_trace(struct ftrace_graph_ret *trace, unsigned long *ret,
+			unsigned long frame_pointer)
 {
 	int index;
 
@@ -106,6 +109,31 @@ ftrace_pop_return_trace(struct ftrace_graph_ret *trace, unsigned long *ret)
 		return;
 	}
 
+#ifdef CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST
+	/*
+	 * The arch may choose to record the frame pointer used
+	 * and check it here to make sure that it is what we expect it
+	 * to be. If gcc does not set the place holder of the return
+	 * address in the frame pointer, and does a copy instead, then
+	 * the function graph trace will fail. This test detects this
+	 * case.
+	 *
+	 * Currently, x86_32 with optimize for size (-Os) makes the latest
+	 * gcc do the above.
+	 */
+	if (unlikely(current->ret_stack[index].fp != frame_pointer)) {
+		ftrace_graph_stop();
+		WARN(1, "Bad frame pointer: expected %lx, received %lx\n"
+		     "  from func %pF return to %lx\n",
+		     current->ret_stack[index].fp,
+		     frame_pointer,
+		     (void *)current->ret_stack[index].func,
+		     current->ret_stack[index].ret);
+		*ret = (unsigned long)panic;
+		return;
+	}
+#endif
+
 	*ret = current->ret_stack[index].ret;
 	trace->func = current->ret_stack[index].func;
 	trace->calltime = current->ret_stack[index].calltime;
@@ -117,12 +145,12 @@ ftrace_pop_return_trace(struct ftrace_graph_ret *trace, unsigned long *ret)
  * Send the trace to the ring-buffer.
  * @return the original return address.
  */
-unsigned long ftrace_return_to_handler(void)
+unsigned long ftrace_return_to_handler(unsigned long frame_pointer)
 {
 	struct ftrace_graph_ret trace;
 	unsigned long ret;
 
-	ftrace_pop_return_trace(&trace, &ret);
+	ftrace_pop_return_trace(&trace, &ret, frame_pointer);
 	trace.rettime = trace_clock_local();
 	ftrace_graph_return(&trace);
 	barrier();
diff --git a/kernel/utsname.c b/kernel/utsname.c
index 815237a55af..8a82b4b8ea5 100644
--- a/kernel/utsname.c
+++ b/kernel/utsname.c
@@ -15,6 +15,16 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 
+static struct uts_namespace *create_uts_ns(void)
+{
+	struct uts_namespace *uts_ns;
+
+	uts_ns = kmalloc(sizeof(struct uts_namespace), GFP_KERNEL);
+	if (uts_ns)
+		kref_init(&uts_ns->kref);
+	return uts_ns;
+}
+
 /*
  * Clone a new ns copying an original utsname, setting refcount to 1
  * @old_ns: namespace to clone
@@ -24,14 +34,13 @@ static struct uts_namespace *clone_uts_ns(struct uts_namespace *old_ns)
 {
 	struct uts_namespace *ns;
 
-	ns = kmalloc(sizeof(struct uts_namespace), GFP_KERNEL);
+	ns = create_uts_ns();
 	if (!ns)
 		return ERR_PTR(-ENOMEM);
 
 	down_read(&uts_sem);
 	memcpy(&ns->name, &old_ns->name, sizeof(ns->name));
 	up_read(&uts_sem);
-	kref_init(&ns->kref);
 	return ns;
 }
 
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 6b0c2d8a212..4c32b1a1a06 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -340,8 +340,6 @@ config DEBUG_KMEMLEAK
 	bool "Kernel memory leak detector"
 	depends on DEBUG_KERNEL && EXPERIMENTAL && (X86 || ARM) && \
 		!MEMORY_HOTPLUG
-	select DEBUG_SLAB if SLAB
-	select SLUB_DEBUG if SLUB
 	select DEBUG_FS if SYSFS
 	select STACKTRACE if STACKTRACE_SUPPORT
 	select KALLSYMS
@@ -355,6 +353,9 @@ config DEBUG_KMEMLEAK
 	  allocations. See Documentation/kmemleak.txt for more
 	  details.
 
+	  Enabling DEBUG_SLAB or SLUB_DEBUG may increase the chances
+	  of finding leaks due to the slab objects poisoning.
+
 	  In order to access the kmemleak file, debugfs needs to be
 	  mounted (usually at /sys/kernel/debug).
 
@@ -472,7 +473,7 @@ config LOCKDEP
 	bool
 	depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
 	select STACKTRACE
-	select FRAME_POINTER if !X86 && !MIPS && !PPC && !ARM_UNWIND && !S390
+	select FRAME_POINTER if !MIPS && !PPC && !ARM_UNWIND && !S390
 	select KALLSYMS
 	select KALLSYMS_ALL
 
diff --git a/lib/Makefile b/lib/Makefile
index 8e9bcf9d326..b6d1857bbf0 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -21,7 +21,7 @@ lib-y	+= kobject.o kref.o klist.o
 
 obj-y += bcd.o div64.o sort.o parser.o halfmd4.o debug_locks.o random32.o \
 	 bust_spinlocks.o hexdump.o kasprintf.o bitmap.o scatterlist.o \
-	 string_helpers.o
+	 string_helpers.o gcd.o
 
 ifeq ($(CONFIG_DEBUG_KOBJECT),y)
 CFLAGS_kobject.o += -DDEBUG
diff --git a/lib/checksum.c b/lib/checksum.c
index 12e5a1c91cd..b2e2fd46846 100644
--- a/lib/checksum.c
+++ b/lib/checksum.c
@@ -55,7 +55,11 @@ static unsigned int do_csum(const unsigned char *buff, int len)
 		goto out;
 	odd = 1 & (unsigned long) buff;
 	if (odd) {
+#ifdef __LITTLE_ENDIAN
 		result = *buff;
+#else
+		result += (*buff << 8);
+#endif
 		len--;
 		buff++;
 	}
@@ -71,7 +75,7 @@ static unsigned int do_csum(const unsigned char *buff, int len)
 		if (count) {
 			unsigned long carry = 0;
 			do {
-				unsigned long w = *(unsigned long *) buff;
+				unsigned long w = *(unsigned int *) buff;
 				count--;
 				buff += 4;
 				result += carry;
@@ -87,7 +91,11 @@ static unsigned int do_csum(const unsigned char *buff, int len)
 		}
 	}
 	if (len & 1)
+#ifdef __LITTLE_ENDIAN
+		result += *buff;
+#else
 		result += (*buff << 8);
+#endif
 	result = from32to16(result);
 	if (odd)
 		result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
diff --git a/lib/dma-debug.c b/lib/dma-debug.c
index ad65fc0317d..3b93129a968 100644
--- a/lib/dma-debug.c
+++ b/lib/dma-debug.c
@@ -262,11 +262,12 @@ static struct dma_debug_entry *hash_bucket_find(struct hash_bucket *bucket,
 		 */
 		matches += 1;
 		match_lvl = 0;
-		entry->size      == ref->size      ? ++match_lvl : match_lvl;
-		entry->type      == ref->type      ? ++match_lvl : match_lvl;
-		entry->direction == ref->direction ? ++match_lvl : match_lvl;
+		entry->size         == ref->size         ? ++match_lvl : 0;
+		entry->type         == ref->type         ? ++match_lvl : 0;
+		entry->direction    == ref->direction    ? ++match_lvl : 0;
+		entry->sg_call_ents == ref->sg_call_ents ? ++match_lvl : 0;
 
-		if (match_lvl == 3) {
+		if (match_lvl == 4) {
 			/* perfect-fit - return the result */
 			return entry;
 		} else if (match_lvl > last_lvl) {
@@ -873,72 +874,68 @@ static void check_for_illegal_area(struct device *dev, void *addr, u64 size)
 				"[addr=%p] [size=%llu]\n", addr, size);
 }
 
-static void check_sync(struct device *dev, dma_addr_t addr,
-		       u64 size, u64 offset, int direction, bool to_cpu)
+static void check_sync(struct device *dev,
+		       struct dma_debug_entry *ref,
+		       bool to_cpu)
 {
-	struct dma_debug_entry ref = {
-		.dev            = dev,
-		.dev_addr       = addr,
-		.size           = size,
-		.direction      = direction,
-	};
 	struct dma_debug_entry *entry;
 	struct hash_bucket *bucket;
 	unsigned long flags;
 
-	bucket = get_hash_bucket(&ref, &flags);
+	bucket = get_hash_bucket(ref, &flags);
 
-	entry = hash_bucket_find(bucket, &ref);
+	entry = hash_bucket_find(bucket, ref);
 
 	if (!entry) {
 		err_printk(dev, NULL, "DMA-API: device driver tries "
 				"to sync DMA memory it has not allocated "
 				"[device address=0x%016llx] [size=%llu bytes]\n",
-				(unsigned long long)addr, size);
+				(unsigned long long)ref->dev_addr, ref->size);
 		goto out;
 	}
 
-	if ((offset + size) > entry->size) {
+	if (ref->size > entry->size) {
 		err_printk(dev, entry, "DMA-API: device driver syncs"
 				" DMA memory outside allocated range "
 				"[device address=0x%016llx] "
-				"[allocation size=%llu bytes] [sync offset=%llu] "
-				"[sync size=%llu]\n", entry->dev_addr, entry->size,
-				offset, size);
+				"[allocation size=%llu bytes] "
+				"[sync offset+size=%llu]\n",
+				entry->dev_addr, entry->size,
+				ref->size);
 	}
 
-	if (direction != entry->direction) {
+	if (ref->direction != entry->direction) {
 		err_printk(dev, entry, "DMA-API: device driver syncs "
 				"DMA memory with different direction "
 				"[device address=0x%016llx] [size=%llu bytes] "
 				"[mapped with %s] [synced with %s]\n",
-				(unsigned long long)addr, entry->size,
+				(unsigned long long)ref->dev_addr, entry->size,
 				dir2name[entry->direction],
-				dir2name[direction]);
+				dir2name[ref->direction]);
 	}
 
 	if (entry->direction == DMA_BIDIRECTIONAL)
 		goto out;
 
 	if (to_cpu && !(entry->direction == DMA_FROM_DEVICE) &&
-		      !(direction == DMA_TO_DEVICE))
+		      !(ref->direction == DMA_TO_DEVICE))
 		err_printk(dev, entry, "DMA-API: device driver syncs "
 				"device read-only DMA memory for cpu "
 				"[device address=0x%016llx] [size=%llu bytes] "
 				"[mapped with %s] [synced with %s]\n",
-				(unsigned long long)addr, entry->size,
+				(unsigned long long)ref->dev_addr, entry->size,
 				dir2name[entry->direction],
-				dir2name[direction]);
+				dir2name[ref->direction]);
 
 	if (!to_cpu && !(entry->direction == DMA_TO_DEVICE) &&
-		       !(direction == DMA_FROM_DEVICE))
+		       !(ref->direction == DMA_FROM_DEVICE))
 		err_printk(dev, entry, "DMA-API: device driver syncs "
 				"device write-only DMA memory to device "
 				"[device address=0x%016llx] [size=%llu bytes] "
 				"[mapped with %s] [synced with %s]\n",
-				(unsigned long long)addr, entry->size,
+				(unsigned long long)ref->dev_addr, entry->size,
 				dir2name[entry->direction],
-				dir2name[direction]);
+				dir2name[ref->direction]);
 
 out:
 	put_hash_bucket(bucket, &flags);
@@ -1036,19 +1033,16 @@ void debug_dma_map_sg(struct device *dev, struct scatterlist *sg,
 }
 EXPORT_SYMBOL(debug_dma_map_sg);
 
-static int get_nr_mapped_entries(struct device *dev, struct scatterlist *s)
+static int get_nr_mapped_entries(struct device *dev,
+				 struct dma_debug_entry *ref)
 {
-	struct dma_debug_entry *entry, ref;
+	struct dma_debug_entry *entry;
 	struct hash_bucket *bucket;
 	unsigned long flags;
 	int mapped_ents;
 
-	ref.dev      = dev;
-	ref.dev_addr = sg_dma_address(s);
-	ref.size     = sg_dma_len(s),
-
-	bucket       = get_hash_bucket(&ref, &flags);
-	entry        = hash_bucket_find(bucket, &ref);
+	bucket       = get_hash_bucket(ref, &flags);
+	entry        = hash_bucket_find(bucket, ref);
 	mapped_ents  = 0;
 
 	if (entry)
@@ -1076,16 +1070,14 @@ void debug_dma_unmap_sg(struct device *dev, struct scatterlist *sglist,
 			.dev_addr       = sg_dma_address(s),
 			.size           = sg_dma_len(s),
 			.direction      = dir,
-			.sg_call_ents   = 0,
+			.sg_call_ents   = nelems,
 		};
 
 		if (mapped_ents && i >= mapped_ents)
 			break;
 
-		if (!i) {
-			ref.sg_call_ents = nelems;
-			mapped_ents = get_nr_mapped_entries(dev, s);
-		}
+		if (!i)
+			mapped_ents = get_nr_mapped_entries(dev, &ref);
 
 		check_unmap(&ref);
 	}
@@ -1140,10 +1132,19 @@ EXPORT_SYMBOL(debug_dma_free_coherent);
 void debug_dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
 				   size_t size, int direction)
 {
+	struct dma_debug_entry ref;
+
 	if (unlikely(global_disable))
 		return;
 
-	check_sync(dev, dma_handle, size, 0, direction, true);
+	ref.type         = dma_debug_single;
+	ref.dev          = dev;
+	ref.dev_addr     = dma_handle;
+	ref.size         = size;
+	ref.direction    = direction;
+	ref.sg_call_ents = 0;
+
+	check_sync(dev, &ref, true);
 }
 EXPORT_SYMBOL(debug_dma_sync_single_for_cpu);
 
@@ -1151,10 +1152,19 @@ void debug_dma_sync_single_for_device(struct device *dev,
 				      dma_addr_t dma_handle, size_t size,
 				      int direction)
 {
+	struct dma_debug_entry ref;
+
 	if (unlikely(global_disable))
 		return;
 
-	check_sync(dev, dma_handle, size, 0, direction, false);
+	ref.type         = dma_debug_single;
+	ref.dev          = dev;
+	ref.dev_addr     = dma_handle;
+	ref.size         = size;
+	ref.direction    = direction;
+	ref.sg_call_ents = 0;
+
+	check_sync(dev, &ref, false);
 }
 EXPORT_SYMBOL(debug_dma_sync_single_for_device);
 
@@ -1163,10 +1173,19 @@ void debug_dma_sync_single_range_for_cpu(struct device *dev,
 					 unsigned long offset, size_t size,
 					 int direction)
 {
+	struct dma_debug_entry ref;
+
 	if (unlikely(global_disable))
 		return;
 
-	check_sync(dev, dma_handle, size, offset, direction, true);
+	ref.type         = dma_debug_single;
+	ref.dev          = dev;
+	ref.dev_addr     = dma_handle;
+	ref.size         = offset + size;
+	ref.direction    = direction;
+	ref.sg_call_ents = 0;
+
+	check_sync(dev, &ref, true);
 }
 EXPORT_SYMBOL(debug_dma_sync_single_range_for_cpu);
 
@@ -1175,10 +1194,19 @@ void debug_dma_sync_single_range_for_device(struct device *dev,
 					    unsigned long offset,
 					    size_t size, int direction)
 {
+	struct dma_debug_entry ref;
+
 	if (unlikely(global_disable))
 		return;
 
-	check_sync(dev, dma_handle, size, offset, direction, false);
+	ref.type         = dma_debug_single;
+	ref.dev          = dev;
+	ref.dev_addr     = dma_handle;
+	ref.size         = offset + size;
+	ref.direction    = direction;
+	ref.sg_call_ents = 0;
+
+	check_sync(dev, &ref, false);
 }
 EXPORT_SYMBOL(debug_dma_sync_single_range_for_device);
 
@@ -1192,14 +1220,24 @@ void debug_dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
 		return;
 
 	for_each_sg(sg, s, nelems, i) {
+
+		struct dma_debug_entry ref = {
+			.type           = dma_debug_sg,
+			.dev            = dev,
+			.paddr          = sg_phys(s),
+			.dev_addr       = sg_dma_address(s),
+			.size           = sg_dma_len(s),
+			.direction      = direction,
+			.sg_call_ents   = nelems,
+		};
+
 		if (!i)
-			mapped_ents = get_nr_mapped_entries(dev, s);
+			mapped_ents = get_nr_mapped_entries(dev, &ref);
 
 		if (i >= mapped_ents)
 			break;
 
-		check_sync(dev, sg_dma_address(s), sg_dma_len(s), 0,
-			   direction, true);
+		check_sync(dev, &ref, true);
 	}
 }
 EXPORT_SYMBOL(debug_dma_sync_sg_for_cpu);
@@ -1214,14 +1252,23 @@ void debug_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
 		return;
 
 	for_each_sg(sg, s, nelems, i) {
+
+		struct dma_debug_entry ref = {
+			.type           = dma_debug_sg,
+			.dev            = dev,
+			.paddr          = sg_phys(s),
+			.dev_addr       = sg_dma_address(s),
+			.size           = sg_dma_len(s),
+			.direction      = direction,
+			.sg_call_ents   = nelems,
+		};
 		if (!i)
-			mapped_ents = get_nr_mapped_entries(dev, s);
+			mapped_ents = get_nr_mapped_entries(dev, &ref);
 
 		if (i >= mapped_ents)
 			break;
 
-		check_sync(dev, sg_dma_address(s), sg_dma_len(s), 0,
-			   direction, false);
+		check_sync(dev, &ref, false);
 	}
 }
 EXPORT_SYMBOL(debug_dma_sync_sg_for_device);
diff --git a/lib/gcd.c b/lib/gcd.c
new file mode 100644
index 00000000000..f879033d982
--- /dev/null
+++ b/lib/gcd.c
@@ -0,0 +1,18 @@
+#include <linux/kernel.h>
+#include <linux/gcd.h>
+#include <linux/module.h>
+
+/* Greatest common divisor */
+unsigned long gcd(unsigned long a, unsigned long b)
+{
+	unsigned long r;
+
+	if (a < b)
+		swap(a, b);
+	while ((r = a % b) != 0) {
+		a = b;
+		b = r;
+	}
+	return b;
+}
+EXPORT_SYMBOL_GPL(gcd);
diff --git a/mm/bootmem.c b/mm/bootmem.c
index 282df0a09e6..d2a9ce95276 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -536,11 +536,15 @@ static void * __init alloc_arch_preferred_bootmem(bootmem_data_t *bdata,
 		return kzalloc(size, GFP_NOWAIT);
 
 #ifdef CONFIG_HAVE_ARCH_BOOTMEM
-	bootmem_data_t *p_bdata;
-
-	p_bdata = bootmem_arch_preferred_node(bdata, size, align, goal, limit);
-	if (p_bdata)
-		return alloc_bootmem_core(p_bdata, size, align, goal, limit);
+	{
+		bootmem_data_t *p_bdata;
+
+		p_bdata = bootmem_arch_preferred_node(bdata, size, align,
+							goal, limit);
+		if (p_bdata)
+			return alloc_bootmem_core(p_bdata, size, align,
+							goal, limit);
+	}
 #endif
 	return NULL;
 }
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index a56e6f3ce97..d0351e31f47 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1985,7 +1985,7 @@ static struct page *hugetlbfs_pagecache_page(struct hstate *h,
 }
 
 static int hugetlb_no_page(struct mm_struct *mm, struct vm_area_struct *vma,
-			unsigned long address, pte_t *ptep, int write_access)
+			unsigned long address, pte_t *ptep, unsigned int flags)
 {
 	struct hstate *h = hstate_vma(vma);
 	int ret = VM_FAULT_SIGBUS;
@@ -2053,7 +2053,7 @@ retry:
 	 * any allocations necessary to record that reservation occur outside
 	 * the spinlock.
 	 */
-	if (write_access && !(vma->vm_flags & VM_SHARED))
+	if ((flags & FAULT_FLAG_WRITE) && !(vma->vm_flags & VM_SHARED))
 		if (vma_needs_reservation(h, vma, address) < 0) {
 			ret = VM_FAULT_OOM;
 			goto backout_unlocked;
@@ -2072,7 +2072,7 @@ retry:
 				&& (vma->vm_flags & VM_SHARED)));
 	set_huge_pte_at(mm, address, ptep, new_pte);
 
-	if (write_access && !(vma->vm_flags & VM_SHARED)) {
+	if ((flags & FAULT_FLAG_WRITE) && !(vma->vm_flags & VM_SHARED)) {
 		/* Optimization, do the COW without a second fault */
 		ret = hugetlb_cow(mm, vma, address, ptep, new_pte, page);
 	}
@@ -2091,7 +2091,7 @@ backout_unlocked:
 }
 
 int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
-			unsigned long address, int write_access)
+			unsigned long address, unsigned int flags)
 {
 	pte_t *ptep;
 	pte_t entry;
@@ -2112,7 +2112,7 @@ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 	mutex_lock(&hugetlb_instantiation_mutex);
 	entry = huge_ptep_get(ptep);
 	if (huge_pte_none(entry)) {
-		ret = hugetlb_no_page(mm, vma, address, ptep, write_access);
+		ret = hugetlb_no_page(mm, vma, address, ptep, flags);
 		goto out_mutex;
 	}
 
@@ -2126,7 +2126,7 @@ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 	 * page now as it is used to determine if a reservation has been
 	 * consumed.
 	 */
-	if (write_access && !pte_write(entry)) {
+	if ((flags & FAULT_FLAG_WRITE) && !pte_write(entry)) {
 		if (vma_needs_reservation(h, vma, address) < 0) {
 			ret = VM_FAULT_OOM;
 			goto out_mutex;
@@ -2143,7 +2143,7 @@ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 		goto out_page_table_lock;
 
 
-	if (write_access) {
+	if (flags & FAULT_FLAG_WRITE) {
 		if (!pte_write(entry)) {
 			ret = hugetlb_cow(mm, vma, address, ptep, entry,
 							pagecache_page);
@@ -2152,7 +2152,8 @@ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 		entry = pte_mkdirty(entry);
 	}
 	entry = pte_mkyoung(entry);
-	if (huge_ptep_set_access_flags(vma, address, ptep, entry, write_access))
+	if (huge_ptep_set_access_flags(vma, address, ptep, entry,
+						flags & FAULT_FLAG_WRITE))
 		update_mmu_cache(vma, address, entry);
 
 out_page_table_lock:
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index ec759b60077..c96f2c8700a 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -61,6 +61,8 @@
  * structure.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
@@ -311,7 +313,7 @@ static int unreferenced_object(struct kmemleak_object *object)
 
 static void print_referenced(struct kmemleak_object *object)
 {
-	pr_info("kmemleak: referenced object 0x%08lx (size %zu)\n",
+	pr_info("referenced object 0x%08lx (size %zu)\n",
 		object->pointer, object->size);
 }
 
@@ -320,7 +322,7 @@ static void print_unreferenced(struct seq_file *seq,
 {
 	int i;
 
-	print_helper(seq, "kmemleak: unreferenced object 0x%08lx (size %zu):\n",
+	print_helper(seq, "unreferenced object 0x%08lx (size %zu):\n",
 		     object->pointer, object->size);
 	print_helper(seq, "  comm \"%s\", pid %d, jiffies %lu\n",
 		     object->comm, object->pid, object->jiffies);
@@ -344,7 +346,7 @@ static void dump_object_info(struct kmemleak_object *object)
 	trace.nr_entries = object->trace_len;
 	trace.entries = object->trace;
 
-	pr_notice("kmemleak: Object 0x%08lx (size %zu):\n",
+	pr_notice("Object 0x%08lx (size %zu):\n",
 		  object->tree_node.start, object->size);
 	pr_notice("  comm \"%s\", pid %d, jiffies %lu\n",
 		  object->comm, object->pid, object->jiffies);
@@ -372,7 +374,7 @@ static struct kmemleak_object *lookup_object(unsigned long ptr, int alias)
 		object = prio_tree_entry(node, struct kmemleak_object,
 					 tree_node);
 		if (!alias && object->pointer != ptr) {
-			kmemleak_warn("kmemleak: Found object by alias");
+			kmemleak_warn("Found object by alias");
 			object = NULL;
 		}
 	} else
@@ -467,8 +469,7 @@ static void create_object(unsigned long ptr, size_t size, int min_count,
 
 	object = kmem_cache_alloc(object_cache, gfp & GFP_KMEMLEAK_MASK);
 	if (!object) {
-		kmemleak_stop("kmemleak: Cannot allocate a kmemleak_object "
-			      "structure\n");
+		kmemleak_stop("Cannot allocate a kmemleak_object structure\n");
 		return;
 	}
 
@@ -527,8 +528,8 @@ static void create_object(unsigned long ptr, size_t size, int min_count,
 	if (node != &object->tree_node) {
 		unsigned long flags;
 
-		kmemleak_stop("kmemleak: Cannot insert 0x%lx into the object "
-			      "search tree (already existing)\n", ptr);
+		kmemleak_stop("Cannot insert 0x%lx into the object search tree "
+			      "(already existing)\n", ptr);
 		object = lookup_object(ptr, 1);
 		spin_lock_irqsave(&object->lock, flags);
 		dump_object_info(object);
@@ -553,7 +554,7 @@ static void delete_object(unsigned long ptr)
 	write_lock_irqsave(&kmemleak_lock, flags);
 	object = lookup_object(ptr, 0);
 	if (!object) {
-		kmemleak_warn("kmemleak: Freeing unknown object at 0x%08lx\n",
+		kmemleak_warn("Freeing unknown object at 0x%08lx\n",
 			      ptr);
 		write_unlock_irqrestore(&kmemleak_lock, flags);
 		return;
@@ -588,8 +589,7 @@ static void make_gray_object(unsigned long ptr)
 
 	object = find_and_get_object(ptr, 0);
 	if (!object) {
-		kmemleak_warn("kmemleak: Graying unknown object at 0x%08lx\n",
-			      ptr);
+		kmemleak_warn("Graying unknown object at 0x%08lx\n", ptr);
 		return;
 	}
 
@@ -610,8 +610,7 @@ static void make_black_object(unsigned long ptr)
 
 	object = find_and_get_object(ptr, 0);
 	if (!object) {
-		kmemleak_warn("kmemleak: Blacking unknown object at 0x%08lx\n",
-			      ptr);
+		kmemleak_warn("Blacking unknown object at 0x%08lx\n", ptr);
 		return;
 	}
 
@@ -634,21 +633,20 @@ static void add_scan_area(unsigned long ptr, unsigned long offset,
 
 	object = find_and_get_object(ptr, 0);
 	if (!object) {
-		kmemleak_warn("kmemleak: Adding scan area to unknown "
-			      "object at 0x%08lx\n", ptr);
+		kmemleak_warn("Adding scan area to unknown object at 0x%08lx\n",
+			      ptr);
 		return;
 	}
 
 	area = kmem_cache_alloc(scan_area_cache, gfp & GFP_KMEMLEAK_MASK);
 	if (!area) {
-		kmemleak_warn("kmemleak: Cannot allocate a scan area\n");
+		kmemleak_warn("Cannot allocate a scan area\n");
 		goto out;
 	}
 
 	spin_lock_irqsave(&object->lock, flags);
 	if (offset + length > object->size) {
-		kmemleak_warn("kmemleak: Scan area larger than object "
-			      "0x%08lx\n", ptr);
+		kmemleak_warn("Scan area larger than object 0x%08lx\n", ptr);
 		dump_object_info(object);
 		kmem_cache_free(scan_area_cache, area);
 		goto out_unlock;
@@ -677,8 +675,7 @@ static void object_no_scan(unsigned long ptr)
 
 	object = find_and_get_object(ptr, 0);
 	if (!object) {
-		kmemleak_warn("kmemleak: Not scanning unknown object at "
-			      "0x%08lx\n", ptr);
+		kmemleak_warn("Not scanning unknown object at 0x%08lx\n", ptr);
 		return;
 	}
 
@@ -699,7 +696,7 @@ static void log_early(int op_type, const void *ptr, size_t size,
 	struct early_log *log;
 
 	if (crt_early_log >= ARRAY_SIZE(early_log)) {
-		kmemleak_stop("kmemleak: Early log buffer exceeded\n");
+		kmemleak_stop("Early log buffer exceeded\n");
 		return;
 	}
 
@@ -966,7 +963,7 @@ static void kmemleak_scan(void)
 		 * 1 reference to any object at this point.
 		 */
 		if (atomic_read(&object->use_count) > 1) {
-			pr_debug("kmemleak: object->use_count = %d\n",
+			pr_debug("object->use_count = %d\n",
 				 atomic_read(&object->use_count));
 			dump_object_info(object);
 		}
@@ -1062,7 +1059,7 @@ static int kmemleak_scan_thread(void *arg)
 {
 	static int first_run = 1;
 
-	pr_info("kmemleak: Automatic memory scanning thread started\n");
+	pr_info("Automatic memory scanning thread started\n");
 
 	/*
 	 * Wait before the first scan to allow the system to fully initialize.
@@ -1108,7 +1105,7 @@ static int kmemleak_scan_thread(void *arg)
 			timeout = schedule_timeout_interruptible(timeout);
 	}
 
-	pr_info("kmemleak: Automatic memory scanning thread ended\n");
+	pr_info("Automatic memory scanning thread ended\n");
 
 	return 0;
 }
@@ -1123,7 +1120,7 @@ void start_scan_thread(void)
 		return;
 	scan_thread = kthread_run(kmemleak_scan_thread, NULL, "kmemleak");
 	if (IS_ERR(scan_thread)) {
-		pr_warning("kmemleak: Failed to create the scan thread\n");
+		pr_warning("Failed to create the scan thread\n");
 		scan_thread = NULL;
 	}
 }
@@ -1367,7 +1364,7 @@ static void kmemleak_cleanup(void)
 	cleanup_thread = kthread_run(kmemleak_cleanup_thread, NULL,
 				     "kmemleak-clean");
 	if (IS_ERR(cleanup_thread))
-		pr_warning("kmemleak: Failed to create the clean-up thread\n");
+		pr_warning("Failed to create the clean-up thread\n");
 }
 
 /*
@@ -1488,8 +1485,7 @@ static int __init kmemleak_late_init(void)
 	dentry = debugfs_create_file("kmemleak", S_IRUGO, NULL, NULL,
 				     &kmemleak_fops);
 	if (!dentry)
-		pr_warning("kmemleak: Failed to create the debugfs kmemleak "
-			   "file\n");
+		pr_warning("Failed to create the debugfs kmemleak file\n");
 	mutex_lock(&kmemleak_mutex);
 	start_scan_thread();
 	mutex_unlock(&kmemleak_mutex);
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 70db6e0a5ee..e2fa20dadf4 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -45,7 +45,7 @@ struct cgroup_subsys mem_cgroup_subsys __read_mostly;
 #define MEM_CGROUP_RECLAIM_RETRIES	5
 
 #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
-/* Turned on only when memory cgroup is enabled && really_do_swap_account = 0 */
+/* Turned on only when memory cgroup is enabled && really_do_swap_account = 1 */
 int do_swap_account __read_mostly;
 static int really_do_swap_account __initdata = 1; /* for remember boot option*/
 #else
@@ -62,7 +62,8 @@ enum mem_cgroup_stat_index {
 	 * For MEM_CONTAINER_TYPE_ALL, usage = pagecache + rss.
 	 */
 	MEM_CGROUP_STAT_CACHE, 	   /* # of pages charged as cache */
-	MEM_CGROUP_STAT_RSS,	   /* # of pages charged as rss */
+	MEM_CGROUP_STAT_RSS,	   /* # of pages charged as anon rss */
+	MEM_CGROUP_STAT_MAPPED_FILE,  /* # of pages charged as file rss */
 	MEM_CGROUP_STAT_PGPGIN_COUNT,	/* # of pages paged in */
 	MEM_CGROUP_STAT_PGPGOUT_COUNT,	/* # of pages paged out */
 
@@ -176,6 +177,9 @@ struct mem_cgroup {
 
 	unsigned int	swappiness;
 
+	/* set when res.limit == memsw.limit */
+	bool		memsw_is_minimum;
+
 	/*
 	 * statistics. This must be placed at the end of memcg.
 	 */
@@ -188,6 +192,7 @@ enum charge_type {
 	MEM_CGROUP_CHARGE_TYPE_SHMEM,	/* used by page migration of shmem */
 	MEM_CGROUP_CHARGE_TYPE_FORCE,	/* used by force_empty */
 	MEM_CGROUP_CHARGE_TYPE_SWAPOUT,	/* for accounting swapcache */
+	MEM_CGROUP_CHARGE_TYPE_DROP,	/* a page was unused swap cache */
 	NR_CHARGE_TYPE,
 };
 
@@ -644,6 +649,7 @@ unsigned long mem_cgroup_isolate_pages(unsigned long nr_to_scan,
 	int zid = zone_idx(z);
 	struct mem_cgroup_per_zone *mz;
 	int lru = LRU_FILE * !!file + !!active;
+	int ret;
 
 	BUG_ON(!mem_cont);
 	mz = mem_cgroup_zoneinfo(mem_cont, nid, zid);
@@ -661,9 +667,19 @@ unsigned long mem_cgroup_isolate_pages(unsigned long nr_to_scan,
 			continue;
 
 		scan++;
-		if (__isolate_lru_page(page, mode, file) == 0) {
+		ret = __isolate_lru_page(page, mode, file);
+		switch (ret) {
+		case 0:
 			list_move(&page->lru, dst);
+			mem_cgroup_del_lru(page);
 			nr_taken++;
+			break;
+		case -EBUSY:
+			/* we don't affect global LRU but rotate in our LRU */
+			mem_cgroup_rotate_lru_list(page, page_lru(page));
+			break;
+		default:
+			break;
 		}
 	}
 
@@ -845,6 +861,10 @@ static int mem_cgroup_hierarchical_reclaim(struct mem_cgroup *root_mem,
 	int ret, total = 0;
 	int loop = 0;
 
+	/* If memsw_is_minimum==1, swap-out is of-no-use. */
+	if (root_mem->memsw_is_minimum)
+		noswap = true;
+
 	while (loop < 2) {
 		victim = mem_cgroup_select_victim(root_mem);
 		if (victim == root_mem)
@@ -900,6 +920,44 @@ static void record_last_oom(struct mem_cgroup *mem)
 	mem_cgroup_walk_tree(mem, NULL, record_last_oom_cb);
 }
 
+/*
+ * Currently used to update mapped file statistics, but the routine can be
+ * generalized to update other statistics as well.
+ */
+void mem_cgroup_update_mapped_file_stat(struct page *page, int val)
+{
+	struct mem_cgroup *mem;
+	struct mem_cgroup_stat *stat;
+	struct mem_cgroup_stat_cpu *cpustat;
+	int cpu;
+	struct page_cgroup *pc;
+
+	if (!page_is_file_cache(page))
+		return;
+
+	pc = lookup_page_cgroup(page);
+	if (unlikely(!pc))
+		return;
+
+	lock_page_cgroup(pc);
+	mem = pc->mem_cgroup;
+	if (!mem)
+		goto done;
+
+	if (!PageCgroupUsed(pc))
+		goto done;
+
+	/*
+	 * Preemption is already disabled, we don't need get_cpu()
+	 */
+	cpu = smp_processor_id();
+	stat = &mem->stat;
+	cpustat = &stat->cpustat[cpu];
+
+	__mem_cgroup_stat_add_safe(cpustat, MEM_CGROUP_STAT_MAPPED_FILE, val);
+done:
+	unlock_page_cgroup(pc);
+}
 
 /*
  * Unlike exported interface, "oom" parameter is added. if oom==true,
@@ -1098,6 +1156,10 @@ static int mem_cgroup_move_account(struct page_cgroup *pc,
 	struct mem_cgroup_per_zone *from_mz, *to_mz;
 	int nid, zid;
 	int ret = -EBUSY;
+	struct page *page;
+	int cpu;
+	struct mem_cgroup_stat *stat;
+	struct mem_cgroup_stat_cpu *cpustat;
 
 	VM_BUG_ON(from == to);
 	VM_BUG_ON(PageLRU(pc->page));
@@ -1118,6 +1180,23 @@ static int mem_cgroup_move_account(struct page_cgroup *pc,
 
 	res_counter_uncharge(&from->res, PAGE_SIZE);
 	mem_cgroup_charge_statistics(from, pc, false);
+
+	page = pc->page;
+	if (page_is_file_cache(page) && page_mapped(page)) {
+		cpu = smp_processor_id();
+		/* Update mapped_file data for mem_cgroup "from" */
+		stat = &from->stat;
+		cpustat = &stat->cpustat[cpu];
+		__mem_cgroup_stat_add_safe(cpustat, MEM_CGROUP_STAT_MAPPED_FILE,
+						-1);
+
+		/* Update mapped_file data for mem_cgroup "to" */
+		stat = &to->stat;
+		cpustat = &stat->cpustat[cpu];
+		__mem_cgroup_stat_add_safe(cpustat, MEM_CGROUP_STAT_MAPPED_FILE,
+						1);
+	}
+
 	if (do_swap_account)
 		res_counter_uncharge(&from->memsw, PAGE_SIZE);
 	css_put(&from->css);
@@ -1433,6 +1512,7 @@ __mem_cgroup_uncharge_common(struct page *page, enum charge_type ctype)
 
 	switch (ctype) {
 	case MEM_CGROUP_CHARGE_TYPE_MAPPED:
+	case MEM_CGROUP_CHARGE_TYPE_DROP:
 		if (page_mapped(page))
 			goto unlock_out;
 		break;
@@ -1496,18 +1576,23 @@ void mem_cgroup_uncharge_cache_page(struct page *page)
  * called after __delete_from_swap_cache() and drop "page" account.
  * memcg information is recorded to swap_cgroup of "ent"
  */
-void mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent)
+void
+mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent, bool swapout)
 {
 	struct mem_cgroup *memcg;
+	int ctype = MEM_CGROUP_CHARGE_TYPE_SWAPOUT;
+
+	if (!swapout) /* this was a swap cache but the swap is unused ! */
+		ctype = MEM_CGROUP_CHARGE_TYPE_DROP;
+
+	memcg = __mem_cgroup_uncharge_common(page, ctype);
 
-	memcg = __mem_cgroup_uncharge_common(page,
-					MEM_CGROUP_CHARGE_TYPE_SWAPOUT);
 	/* record memcg information */
-	if (do_swap_account && memcg) {
+	if (do_swap_account && swapout && memcg) {
 		swap_cgroup_record(ent, css_id(&memcg->css));
 		mem_cgroup_get(memcg);
 	}
-	if (memcg)
+	if (swapout && memcg)
 		css_put(&memcg->css);
 }
 #endif
@@ -1685,6 +1770,12 @@ static int mem_cgroup_resize_limit(struct mem_cgroup *memcg,
 			break;
 		}
 		ret = res_counter_set_limit(&memcg->res, val);
+		if (!ret) {
+			if (memswlimit == val)
+				memcg->memsw_is_minimum = true;
+			else
+				memcg->memsw_is_minimum = false;
+		}
 		mutex_unlock(&set_limit_mutex);
 
 		if (!ret)
@@ -1703,16 +1794,14 @@ static int mem_cgroup_resize_limit(struct mem_cgroup *memcg,
 	return ret;
 }
 
-int mem_cgroup_resize_memsw_limit(struct mem_cgroup *memcg,
-				unsigned long long val)
+static int mem_cgroup_resize_memsw_limit(struct mem_cgroup *memcg,
+					unsigned long long val)
 {
 	int retry_count;
 	u64 memlimit, oldusage, curusage;
 	int children = mem_cgroup_count_children(memcg);
 	int ret = -EBUSY;
 
-	if (!do_swap_account)
-		return -EINVAL;
 	/* see mem_cgroup_resize_res_limit */
  	retry_count = children * MEM_CGROUP_RECLAIM_RETRIES;
 	oldusage = res_counter_read_u64(&memcg->memsw, RES_USAGE);
@@ -1734,6 +1823,12 @@ int mem_cgroup_resize_memsw_limit(struct mem_cgroup *memcg,
 			break;
 		}
 		ret = res_counter_set_limit(&memcg->memsw, val);
+		if (!ret) {
+			if (memlimit == val)
+				memcg->memsw_is_minimum = true;
+			else
+				memcg->memsw_is_minimum = false;
+		}
 		mutex_unlock(&set_limit_mutex);
 
 		if (!ret)
@@ -1947,8 +2042,7 @@ static u64 mem_cgroup_read(struct cgroup *cont, struct cftype *cft)
 		val = res_counter_read_u64(&mem->res, name);
 		break;
 	case _MEMSWAP:
-		if (do_swap_account)
-			val = res_counter_read_u64(&mem->memsw, name);
+		val = res_counter_read_u64(&mem->memsw, name);
 		break;
 	default:
 		BUG();
@@ -2046,6 +2140,7 @@ static int mem_cgroup_reset(struct cgroup *cont, unsigned int event)
 enum {
 	MCS_CACHE,
 	MCS_RSS,
+	MCS_MAPPED_FILE,
 	MCS_PGPGIN,
 	MCS_PGPGOUT,
 	MCS_INACTIVE_ANON,
@@ -2066,6 +2161,7 @@ struct {
 } memcg_stat_strings[NR_MCS_STAT] = {
 	{"cache", "total_cache"},
 	{"rss", "total_rss"},
+	{"mapped_file", "total_mapped_file"},
 	{"pgpgin", "total_pgpgin"},
 	{"pgpgout", "total_pgpgout"},
 	{"inactive_anon", "total_inactive_anon"},
@@ -2086,6 +2182,8 @@ static int mem_cgroup_get_local_stat(struct mem_cgroup *mem, void *data)
 	s->stat[MCS_CACHE] += val * PAGE_SIZE;
 	val = mem_cgroup_read_stat(&mem->stat, MEM_CGROUP_STAT_RSS);
 	s->stat[MCS_RSS] += val * PAGE_SIZE;
+	val = mem_cgroup_read_stat(&mem->stat, MEM_CGROUP_STAT_MAPPED_FILE);
+	s->stat[MCS_MAPPED_FILE] += val * PAGE_SIZE;
 	val = mem_cgroup_read_stat(&mem->stat, MEM_CGROUP_STAT_PGPGIN_COUNT);
 	s->stat[MCS_PGPGIN] += val;
 	val = mem_cgroup_read_stat(&mem->stat, MEM_CGROUP_STAT_PGPGOUT_COUNT);
diff --git a/mm/memory.c b/mm/memory.c
index d5d1653d60a..f46ac18ba23 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1310,8 +1310,11 @@ int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
 			cond_resched();
 			while (!(page = follow_page(vma, start, foll_flags))) {
 				int ret;
+
 				ret = handle_mm_fault(mm, vma, start,
-						foll_flags & FOLL_WRITE);
+					(foll_flags & FOLL_WRITE) ?
+					FAULT_FLAG_WRITE : 0);
+
 				if (ret & VM_FAULT_ERROR) {
 					if (ret & VM_FAULT_OOM)
 						return i ? i : -ENOMEM;
@@ -2496,7 +2499,7 @@ int vmtruncate_range(struct inode *inode, loff_t offset, loff_t end)
  */
 static int do_swap_page(struct mm_struct *mm, struct vm_area_struct *vma,
 		unsigned long address, pte_t *page_table, pmd_t *pmd,
-		int write_access, pte_t orig_pte)
+		unsigned int flags, pte_t orig_pte)
 {
 	spinlock_t *ptl;
 	struct page *page;
@@ -2516,7 +2519,7 @@ static int do_swap_page(struct mm_struct *mm, struct vm_area_struct *vma,
 	delayacct_set_flag(DELAYACCT_PF_SWAPIN);
 	page = lookup_swap_cache(entry);
 	if (!page) {
-		grab_swap_token(); /* Contend for token _before_ read-in */
+		grab_swap_token(mm); /* Contend for token _before_ read-in */
 		page = swapin_readahead(entry,
 					GFP_HIGHUSER_MOVABLE, vma, address);
 		if (!page) {
@@ -2572,9 +2575,9 @@ static int do_swap_page(struct mm_struct *mm, struct vm_area_struct *vma,
 
 	inc_mm_counter(mm, anon_rss);
 	pte = mk_pte(page, vma->vm_page_prot);
-	if (write_access && reuse_swap_page(page)) {
+	if ((flags & FAULT_FLAG_WRITE) && reuse_swap_page(page)) {
 		pte = maybe_mkwrite(pte_mkdirty(pte), vma);
-		write_access = 0;
+		flags &= ~FAULT_FLAG_WRITE;
 	}
 	flush_icache_page(vma, page);
 	set_pte_at(mm, address, page_table, pte);
@@ -2587,7 +2590,7 @@ static int do_swap_page(struct mm_struct *mm, struct vm_area_struct *vma,
 		try_to_free_swap(page);
 	unlock_page(page);
 
-	if (write_access) {
+	if (flags & FAULT_FLAG_WRITE) {
 		ret |= do_wp_page(mm, vma, address, page_table, pmd, ptl, pte);
 		if (ret & VM_FAULT_ERROR)
 			ret &= VM_FAULT_ERROR;
@@ -2616,7 +2619,7 @@ out_page:
  */
 static int do_anonymous_page(struct mm_struct *mm, struct vm_area_struct *vma,
 		unsigned long address, pte_t *page_table, pmd_t *pmd,
-		int write_access)
+		unsigned int flags)
 {
 	struct page *page;
 	spinlock_t *ptl;
@@ -2776,7 +2779,7 @@ static int __do_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 	 * due to the bad i386 page protection. But it's valid
 	 * for other architectures too.
 	 *
-	 * Note that if write_access is true, we either now have
+	 * Note that if FAULT_FLAG_WRITE is set, we either now have
 	 * an exclusive copy of the page, or this is a shared mapping,
 	 * so we can make it writable and dirty to avoid having to
 	 * handle that later.
@@ -2847,11 +2850,10 @@ unwritable_page:
 
 static int do_linear_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 		unsigned long address, pte_t *page_table, pmd_t *pmd,
-		int write_access, pte_t orig_pte)
+		unsigned int flags, pte_t orig_pte)
 {
 	pgoff_t pgoff = (((address & PAGE_MASK)
 			- vma->vm_start) >> PAGE_SHIFT) + vma->vm_pgoff;
-	unsigned int flags = (write_access ? FAULT_FLAG_WRITE : 0);
 
 	pte_unmap(page_table);
 	return __do_fault(mm, vma, address, pmd, pgoff, flags, orig_pte);
@@ -2868,12 +2870,12 @@ static int do_linear_fault(struct mm_struct *mm, struct vm_area_struct *vma,
  */
 static int do_nonlinear_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 		unsigned long address, pte_t *page_table, pmd_t *pmd,
-		int write_access, pte_t orig_pte)
+		unsigned int flags, pte_t orig_pte)
 {
-	unsigned int flags = FAULT_FLAG_NONLINEAR |
-				(write_access ? FAULT_FLAG_WRITE : 0);
 	pgoff_t pgoff;
 
+	flags |= FAULT_FLAG_NONLINEAR;
+
 	if (!pte_unmap_same(mm, pmd, page_table, orig_pte))
 		return 0;
 
@@ -2904,7 +2906,7 @@ static int do_nonlinear_fault(struct mm_struct *mm, struct vm_area_struct *vma,
  */
 static inline int handle_pte_fault(struct mm_struct *mm,
 		struct vm_area_struct *vma, unsigned long address,
-		pte_t *pte, pmd_t *pmd, int write_access)
+		pte_t *pte, pmd_t *pmd, unsigned int flags)
 {
 	pte_t entry;
 	spinlock_t *ptl;
@@ -2915,30 +2917,30 @@ static inline int handle_pte_fault(struct mm_struct *mm,
 			if (vma->vm_ops) {
 				if (likely(vma->vm_ops->fault))
 					return do_linear_fault(mm, vma, address,
-						pte, pmd, write_access, entry);
+						pte, pmd, flags, entry);
 			}
 			return do_anonymous_page(mm, vma, address,
-						 pte, pmd, write_access);
+						 pte, pmd, flags);
 		}
 		if (pte_file(entry))
 			return do_nonlinear_fault(mm, vma, address,
-					pte, pmd, write_access, entry);
+					pte, pmd, flags, entry);
 		return do_swap_page(mm, vma, address,
-					pte, pmd, write_access, entry);
+					pte, pmd, flags, entry);
 	}
 
 	ptl = pte_lockptr(mm, pmd);
 	spin_lock(ptl);
 	if (unlikely(!pte_same(*pte, entry)))
 		goto unlock;
-	if (write_access) {
+	if (flags & FAULT_FLAG_WRITE) {
 		if (!pte_write(entry))
 			return do_wp_page(mm, vma, address,
 					pte, pmd, ptl, entry);
 		entry = pte_mkdirty(entry);
 	}
 	entry = pte_mkyoung(entry);
-	if (ptep_set_access_flags(vma, address, pte, entry, write_access)) {
+	if (ptep_set_access_flags(vma, address, pte, entry, flags & FAULT_FLAG_WRITE)) {
 		update_mmu_cache(vma, address, entry);
 	} else {
 		/*
@@ -2947,7 +2949,7 @@ static inline int handle_pte_fault(struct mm_struct *mm,
 		 * This still avoids useless tlb flushes for .text page faults
 		 * with threads.
 		 */
-		if (write_access)
+		if (flags & FAULT_FLAG_WRITE)
 			flush_tlb_page(vma, address);
 	}
 unlock:
@@ -2959,7 +2961,7 @@ unlock:
  * By the time we get here, we already hold the mm semaphore
  */
 int handle_mm_fault(struct mm_struct *mm, struct vm_area_struct *vma,
-		unsigned long address, int write_access)
+		unsigned long address, unsigned int flags)
 {
 	pgd_t *pgd;
 	pud_t *pud;
@@ -2971,7 +2973,7 @@ int handle_mm_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 	count_vm_event(PGFAULT);
 
 	if (unlikely(is_vm_hugetlb_page(vma)))
-		return hugetlb_fault(mm, vma, address, write_access);
+		return hugetlb_fault(mm, vma, address, flags);
 
 	pgd = pgd_offset(mm, address);
 	pud = pud_alloc(mm, pgd, address);
@@ -2984,7 +2986,7 @@ int handle_mm_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 	if (!pte)
 		return VM_FAULT_OOM;
 
-	return handle_pte_fault(mm, vma, address, pte, pmd, write_access);
+	return handle_pte_fault(mm, vma, address, pte, pmd, flags);
 }
 
 #ifndef __PAGETABLE_PUD_FOLDED
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index a5f3c278c57..aecc9cdfdfc 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -73,6 +73,7 @@ unsigned long totalram_pages __read_mostly;
 unsigned long totalreserve_pages __read_mostly;
 unsigned long highest_memmap_pfn __read_mostly;
 int percpu_pagelist_fraction;
+gfp_t gfp_allowed_mask __read_mostly = GFP_BOOT_MASK;
 
 #ifdef CONFIG_HUGETLB_PAGE_SIZE_VARIABLE
 int pageblock_order __read_mostly;
@@ -487,7 +488,6 @@ static inline void __free_one_page(struct page *page,
  */
 static inline void free_page_mlock(struct page *page)
 {
-	__ClearPageMlocked(page);
 	__dec_zone_page_state(page, NR_MLOCK);
 	__count_vm_event(UNEVICTABLE_MLOCKFREED);
 }
@@ -557,7 +557,7 @@ static void __free_pages_ok(struct page *page, unsigned int order)
 	unsigned long flags;
 	int i;
 	int bad = 0;
-	int clearMlocked = PageMlocked(page);
+	int wasMlocked = TestClearPageMlocked(page);
 
 	kmemcheck_free_shadow(page, order);
 
@@ -575,7 +575,7 @@ static void __free_pages_ok(struct page *page, unsigned int order)
 	kernel_map_pages(page, 1 << order, 0);
 
 	local_irq_save(flags);
-	if (unlikely(clearMlocked))
+	if (unlikely(wasMlocked))
 		free_page_mlock(page);
 	__count_vm_events(PGFREE, 1 << order);
 	free_one_page(page_zone(page), page, order,
@@ -1021,7 +1021,7 @@ static void free_hot_cold_page(struct page *page, int cold)
 	struct zone *zone = page_zone(page);
 	struct per_cpu_pages *pcp;
 	unsigned long flags;
-	int clearMlocked = PageMlocked(page);
+	int wasMlocked = TestClearPageMlocked(page);
 
 	kmemcheck_free_shadow(page, 0);
 
@@ -1040,7 +1040,7 @@ static void free_hot_cold_page(struct page *page, int cold)
 	pcp = &zone_pcp(zone, get_cpu())->pcp;
 	set_page_private(page, get_pageblock_migratetype(page));
 	local_irq_save(flags);
-	if (unlikely(clearMlocked))
+	if (unlikely(wasMlocked))
 		free_page_mlock(page);
 	__count_vm_event(PGFREE);
 
@@ -1863,6 +1863,8 @@ __alloc_pages_nodemask(gfp_t gfp_mask, unsigned int order,
 	struct page *page;
 	int migratetype = allocflags_to_migratetype(gfp_mask);
 
+	gfp_mask &= gfp_allowed_mask;
+
 	lockdep_trace_alloc(gfp_mask);
 
 	might_sleep_if(gfp_mask & __GFP_WAIT);
@@ -3024,7 +3026,7 @@ bad:
 		if (dzone == zone)
 			break;
 		kfree(zone_pcp(dzone, cpu));
-		zone_pcp(dzone, cpu) = NULL;
+		zone_pcp(dzone, cpu) = &boot_pageset[cpu];
 	}
 	return -ENOMEM;
 }
@@ -3039,7 +3041,7 @@ static inline void free_zone_pagesets(int cpu)
 		/* Free per_cpu_pageset if it is slab allocated */
 		if (pset != &boot_pageset[cpu])
 			kfree(pset);
-		zone_pcp(zone, cpu) = NULL;
+		zone_pcp(zone, cpu) = &boot_pageset[cpu];
 	}
 }
 
@@ -4657,7 +4659,7 @@ int percpu_pagelist_fraction_sysctl_handler(ctl_table *table, int write,
 	ret = proc_dointvec_minmax(table, write, file, buffer, length, ppos);
 	if (!write || (ret == -EINVAL))
 		return ret;
-	for_each_zone(zone) {
+	for_each_populated_zone(zone) {
 		for_each_online_cpu(cpu) {
 			unsigned long  high;
 			high = zone->present_pages / percpu_pagelist_fraction;
diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c
index 11a8a10a390..f22b4ebbd8d 100644
--- a/mm/page_cgroup.c
+++ b/mm/page_cgroup.c
@@ -83,12 +83,12 @@ void __init page_cgroup_init_flatmem(void)
 			goto fail;
 	}
 	printk(KERN_INFO "allocated %ld bytes of page_cgroup\n", total_usage);
-	printk(KERN_INFO "please try cgroup_disable=memory option if you"
-	" don't want\n");
+	printk(KERN_INFO "please try 'cgroup_disable=memory' option if you"
+	" don't want memory cgroups\n");
 	return;
 fail:
-	printk(KERN_CRIT "allocation of page_cgroup was failed.\n");
-	printk(KERN_CRIT "please try cgroup_disable=memory boot option\n");
+	printk(KERN_CRIT "allocation of page_cgroup failed.\n");
+	printk(KERN_CRIT "please try 'cgroup_disable=memory' boot option\n");
 	panic("Out of memory");
 }
 
@@ -99,6 +99,8 @@ struct page_cgroup *lookup_page_cgroup(struct page *page)
 	unsigned long pfn = page_to_pfn(page);
 	struct mem_section *section = __pfn_to_section(pfn);
 
+	if (!section->page_cgroup)
+		return NULL;
 	return section->page_cgroup + pfn;
 }
 
@@ -252,14 +254,14 @@ void __init page_cgroup_init(void)
 		fail = init_section_page_cgroup(pfn);
 	}
 	if (fail) {
-		printk(KERN_CRIT "try cgroup_disable=memory boot option\n");
+		printk(KERN_CRIT "try 'cgroup_disable=memory' boot option\n");
 		panic("Out of memory");
 	} else {
 		hotplug_memory_notifier(page_cgroup_callback, 0);
 	}
 	printk(KERN_INFO "allocated %ld bytes of page_cgroup\n", total_usage);
-	printk(KERN_INFO "please try cgroup_disable=memory option if you don't"
-	" want\n");
+	printk(KERN_INFO "please try 'cgroup_disable=memory' option if you don't"
+	" want memory cgroups\n");
 }
 
 void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat)
@@ -309,8 +311,6 @@ static int swap_cgroup_prepare(int type)
 	struct swap_cgroup_ctrl *ctrl;
 	unsigned long idx, max;
 
-	if (!do_swap_account)
-		return 0;
 	ctrl = &swap_cgroup_ctrl[type];
 
 	for (idx = 0; idx < ctrl->length; idx++) {
@@ -347,9 +347,6 @@ unsigned short swap_cgroup_record(swp_entry_t ent, unsigned short id)
 	struct swap_cgroup *sc;
 	unsigned short old;
 
-	if (!do_swap_account)
-		return 0;
-
 	ctrl = &swap_cgroup_ctrl[type];
 
 	mappage = ctrl->map[idx];
@@ -378,9 +375,6 @@ unsigned short lookup_swap_cgroup(swp_entry_t ent)
 	struct swap_cgroup *sc;
 	unsigned short ret;
 
-	if (!do_swap_account)
-		return 0;
-
 	ctrl = &swap_cgroup_ctrl[type];
 	mappage = ctrl->map[idx];
 	sc = page_address(mappage);
diff --git a/mm/rmap.c b/mm/rmap.c
index c9ccc1a72dc..836c6c63e1f 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -703,8 +703,10 @@ void page_add_new_anon_rmap(struct page *page,
  */
 void page_add_file_rmap(struct page *page)
 {
-	if (atomic_inc_and_test(&page->_mapcount))
+	if (atomic_inc_and_test(&page->_mapcount)) {
 		__inc_zone_page_state(page, NR_FILE_MAPPED);
+		mem_cgroup_update_mapped_file_stat(page, 1);
+	}
 }
 
 #ifdef CONFIG_DEBUG_VM
@@ -753,6 +755,7 @@ void page_remove_rmap(struct page *page)
 			mem_cgroup_uncharge_page(page);
 		__dec_zone_page_state(page,
 			PageAnon(page) ? NR_ANON_PAGES : NR_FILE_MAPPED);
+		mem_cgroup_update_mapped_file_stat(page, -1);
 		/*
 		 * It would be tidy to reset the PageAnon mapping here,
 		 * but that might overwrite a racing page_add_anon_rmap
diff --git a/mm/slab.c b/mm/slab.c
index d08692303f6..e74a16e4ced 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -305,12 +305,6 @@ struct kmem_list3 {
 };
 
 /*
- * The slab allocator is initialized with interrupts disabled. Therefore, make
- * sure early boot allocations don't accidentally enable interrupts.
- */
-static gfp_t slab_gfp_mask __read_mostly = SLAB_GFP_BOOT_MASK;
-
-/*
  * Need this for bootstrapping a per node allocator.
  */
 #define NUM_INIT_LISTS (3 * MAX_NUMNODES)
@@ -1559,11 +1553,6 @@ void __init kmem_cache_init_late(void)
 {
 	struct kmem_cache *cachep;
 
-	/*
-	 * Interrupts are enabled now so all GFP allocations are safe.
-	 */
-	slab_gfp_mask = __GFP_BITS_MASK;
-
 	/* 6) resize the head arrays to their final sizes */
 	mutex_lock(&cache_chain_mutex);
 	list_for_each_entry(cachep, &cache_chain, next)
@@ -3307,7 +3296,7 @@ __cache_alloc_node(struct kmem_cache *cachep, gfp_t flags, int nodeid,
 	unsigned long save_flags;
 	void *ptr;
 
-	flags &= slab_gfp_mask;
+	flags &= gfp_allowed_mask;
 
 	lockdep_trace_alloc(flags);
 
@@ -3392,7 +3381,7 @@ __cache_alloc(struct kmem_cache *cachep, gfp_t flags, void *caller)
 	unsigned long save_flags;
 	void *objp;
 
-	flags &= slab_gfp_mask;
+	flags &= gfp_allowed_mask;
 
 	lockdep_trace_alloc(flags);
 
diff --git a/mm/slub.c b/mm/slub.c
index 4c6449310a0..ce62b770e2f 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -179,12 +179,6 @@ static enum {
 	SYSFS		/* Sysfs up */
 } slab_state = DOWN;
 
-/*
- * The slab allocator is initialized with interrupts disabled. Therefore, make
- * sure early boot allocations don't accidentally enable interrupts.
- */
-static gfp_t slab_gfp_mask __read_mostly = SLAB_GFP_BOOT_MASK;
-
 /* A list of all slab caches on the system */
 static DECLARE_RWSEM(slub_lock);
 static LIST_HEAD(slab_caches);
@@ -1692,7 +1686,7 @@ static __always_inline void *slab_alloc(struct kmem_cache *s,
 	unsigned long flags;
 	unsigned int objsize;
 
-	gfpflags &= slab_gfp_mask;
+	gfpflags &= gfp_allowed_mask;
 
 	lockdep_trace_alloc(gfpflags);
 	might_sleep_if(gfpflags & __GFP_WAIT);
@@ -3220,10 +3214,6 @@ void __init kmem_cache_init(void)
 
 void __init kmem_cache_init_late(void)
 {
-	/*
-	 * Interrupts are enabled now so all GFP allocations are safe.
-	 */
-	slab_gfp_mask = __GFP_BITS_MASK;
 }
 
 /*
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 28faa01cf57..d1ade1a48ee 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -583,8 +583,9 @@ static int swap_entry_free(struct swap_info_struct *p,
 			swap_list.next = p - swap_info;
 		nr_swap_pages++;
 		p->inuse_pages--;
-		mem_cgroup_uncharge_swap(ent);
 	}
+	if (!swap_count(count))
+		mem_cgroup_uncharge_swap(ent);
 	return count;
 }
 
@@ -609,12 +610,19 @@ void swap_free(swp_entry_t entry)
 void swapcache_free(swp_entry_t entry, struct page *page)
 {
 	struct swap_info_struct *p;
+	int ret;
 
-	if (page)
-		mem_cgroup_uncharge_swapcache(page, entry);
 	p = swap_info_get(entry);
 	if (p) {
-		swap_entry_free(p, entry, SWAP_CACHE);
+		ret = swap_entry_free(p, entry, SWAP_CACHE);
+		if (page) {
+			bool swapout;
+			if (ret)
+				swapout = true; /* the end of swap out */
+			else
+				swapout = false; /* no more swap users! */
+			mem_cgroup_uncharge_swapcache(page, entry, swapout);
+		}
 		spin_unlock(&swap_lock);
 	}
 	return;
diff --git a/mm/thrash.c b/mm/thrash.c
index c4c5205a9c3..2372d4ed5dd 100644
--- a/mm/thrash.c
+++ b/mm/thrash.c
@@ -26,47 +26,45 @@ static DEFINE_SPINLOCK(swap_token_lock);
 struct mm_struct *swap_token_mm;
 static unsigned int global_faults;
 
-void grab_swap_token(void)
+void grab_swap_token(struct mm_struct *mm)
 {
 	int current_interval;
 
 	global_faults++;
 
-	current_interval = global_faults - current->mm->faultstamp;
+	current_interval = global_faults - mm->faultstamp;
 
 	if (!spin_trylock(&swap_token_lock))
 		return;
 
 	/* First come first served */
 	if (swap_token_mm == NULL) {
-		current->mm->token_priority = current->mm->token_priority + 2;
-		swap_token_mm = current->mm;
+		mm->token_priority = mm->token_priority + 2;
+		swap_token_mm = mm;
 		goto out;
 	}
 
-	if (current->mm != swap_token_mm) {
-		if (current_interval < current->mm->last_interval)
-			current->mm->token_priority++;
+	if (mm != swap_token_mm) {
+		if (current_interval < mm->last_interval)
+			mm->token_priority++;
 		else {
-			if (likely(current->mm->token_priority > 0))
-				current->mm->token_priority--;
+			if (likely(mm->token_priority > 0))
+				mm->token_priority--;
 		}
 		/* Check if we deserve the token */
-		if (current->mm->token_priority >
-				swap_token_mm->token_priority) {
-			current->mm->token_priority += 2;
-			swap_token_mm = current->mm;
+		if (mm->token_priority > swap_token_mm->token_priority) {
+			mm->token_priority += 2;
+			swap_token_mm = mm;
 		}
 	} else {
 		/* Token holder came in again! */
-		current->mm->token_priority += 2;
+		mm->token_priority += 2;
 	}
 
 out:
-	current->mm->faultstamp = global_faults;
-	current->mm->last_interval = current_interval;
+	mm->faultstamp = global_faults;
+	mm->last_interval = current_interval;
 	spin_unlock(&swap_token_lock);
-return;
 }
 
 /* Called on process exit. */
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 4139aa52b94..54155268dfc 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -837,7 +837,6 @@ int __isolate_lru_page(struct page *page, int mode, int file)
 		 */
 		ClearPageLRU(page);
 		ret = 0;
-		mem_cgroup_del_lru(page);
 	}
 
 	return ret;
@@ -885,12 +884,14 @@ static unsigned long isolate_lru_pages(unsigned long nr_to_scan,
 		switch (__isolate_lru_page(page, mode, file)) {
 		case 0:
 			list_move(&page->lru, dst);
+			mem_cgroup_del_lru(page);
 			nr_taken++;
 			break;
 
 		case -EBUSY:
 			/* else it is being freed elsewhere */
 			list_move(&page->lru, src);
+			mem_cgroup_rotate_lru_list(page, page_lru(page));
 			continue;
 
 		default:
@@ -931,6 +932,7 @@ static unsigned long isolate_lru_pages(unsigned long nr_to_scan,
 				continue;
 			if (__isolate_lru_page(cursor_page, mode, file) == 0) {
 				list_move(&cursor_page->lru, dst);
+				mem_cgroup_del_lru(cursor_page);
 				nr_taken++;
 				scan++;
 			}
diff --git a/net/appletalk/atalk_proc.c b/net/appletalk/atalk_proc.c
index fd8e0847b25..80caad1a31a 100644
--- a/net/appletalk/atalk_proc.c
+++ b/net/appletalk/atalk_proc.c
@@ -204,8 +204,8 @@ static int atalk_seq_socket_show(struct seq_file *seq, void *v)
 			"%02X %d\n",
 		   s->sk_type, ntohs(at->src_net), at->src_node, at->src_port,
 		   ntohs(at->dest_net), at->dest_node, at->dest_port,
-		   atomic_read(&s->sk_wmem_alloc),
-		   atomic_read(&s->sk_rmem_alloc),
+		   sk_wmem_alloc_get(s),
+		   sk_rmem_alloc_get(s),
 		   s->sk_state, SOCK_INODE(s->sk_socket)->i_uid);
 out:
 	return 0;
diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c
index b603cbacdc5..590b8396362 100644
--- a/net/appletalk/ddp.c
+++ b/net/appletalk/ddp.c
@@ -162,8 +162,7 @@ static void atalk_destroy_timer(unsigned long data)
 {
 	struct sock *sk = (struct sock *)data;
 
-	if (atomic_read(&sk->sk_wmem_alloc) ||
-	    atomic_read(&sk->sk_rmem_alloc)) {
+	if (sk_has_allocations(sk)) {
 		sk->sk_timer.expires = jiffies + SOCK_DESTROY_TIME;
 		add_timer(&sk->sk_timer);
 	} else
@@ -175,8 +174,7 @@ static inline void atalk_destroy_socket(struct sock *sk)
 	atalk_remove_socket(sk);
 	skb_queue_purge(&sk->sk_receive_queue);
 
-	if (atomic_read(&sk->sk_wmem_alloc) ||
-	    atomic_read(&sk->sk_rmem_alloc)) {
+	if (sk_has_allocations(sk)) {
 		setup_timer(&sk->sk_timer, atalk_destroy_timer,
 				(unsigned long)sk);
 		sk->sk_timer.expires	= jiffies + SOCK_DESTROY_TIME;
@@ -1750,8 +1748,7 @@ static int atalk_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 	switch (cmd) {
 		/* Protocol layer */
 		case TIOCOUTQ: {
-			long amount = sk->sk_sndbuf -
-				      atomic_read(&sk->sk_wmem_alloc);
+			long amount = sk->sk_sndbuf - sk_wmem_alloc_get(sk);
 
 			if (amount < 0)
 				amount = 0;
diff --git a/net/atm/common.c b/net/atm/common.c
index d34edbe754c..c1c97936192 100644
--- a/net/atm/common.c
+++ b/net/atm/common.c
@@ -62,15 +62,15 @@ static struct sk_buff *alloc_tx(struct atm_vcc *vcc,unsigned int size)
 	struct sk_buff *skb;
 	struct sock *sk = sk_atm(vcc);
 
-	if (atomic_read(&sk->sk_wmem_alloc) && !atm_may_send(vcc, size)) {
+	if (sk_wmem_alloc_get(sk) && !atm_may_send(vcc, size)) {
 		pr_debug("Sorry: wmem_alloc = %d, size = %d, sndbuf = %d\n",
-			atomic_read(&sk->sk_wmem_alloc), size,
+			sk_wmem_alloc_get(sk), size,
 			sk->sk_sndbuf);
 		return NULL;
 	}
-	while (!(skb = alloc_skb(size,GFP_KERNEL))) schedule();
-	pr_debug("AlTx %d += %d\n", atomic_read(&sk->sk_wmem_alloc),
-		skb->truesize);
+	while (!(skb = alloc_skb(size, GFP_KERNEL)))
+		schedule();
+	pr_debug("AlTx %d += %d\n", sk_wmem_alloc_get(sk), skb->truesize);
 	atomic_add(skb->truesize, &sk->sk_wmem_alloc);
 	return skb;
 }
@@ -145,7 +145,7 @@ int vcc_create(struct net *net, struct socket *sock, int protocol, int family)
 	memset(&vcc->local,0,sizeof(struct sockaddr_atmsvc));
 	memset(&vcc->remote,0,sizeof(struct sockaddr_atmsvc));
 	vcc->qos.txtp.max_sdu = 1 << 16; /* for meta VCs */
-	atomic_set(&sk->sk_wmem_alloc, 0);
+	atomic_set(&sk->sk_wmem_alloc, 1);
 	atomic_set(&sk->sk_rmem_alloc, 0);
 	vcc->push = NULL;
 	vcc->pop = NULL;
diff --git a/net/atm/ioctl.c b/net/atm/ioctl.c
index 76ed3c8d26e..4da8892ced5 100644
--- a/net/atm/ioctl.c
+++ b/net/atm/ioctl.c
@@ -63,8 +63,7 @@ static int do_vcc_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg
 				error =  -EINVAL;
 				goto done;
 			}
-			error = put_user(sk->sk_sndbuf -
-					 atomic_read(&sk->sk_wmem_alloc),
+			error = put_user(sk->sk_sndbuf - sk_wmem_alloc_get(sk),
 					 (int __user *) argp) ? -EFAULT : 0;
 			goto done;
 		case SIOCINQ:
diff --git a/net/atm/proc.c b/net/atm/proc.c
index e7b3b273907..38de5ff61ec 100644
--- a/net/atm/proc.c
+++ b/net/atm/proc.c
@@ -204,8 +204,8 @@ static void vcc_info(struct seq_file *seq, struct atm_vcc *vcc)
 			seq_printf(seq, "%3d", sk->sk_family);
 	}
 	seq_printf(seq, " %04lx  %5d %7d/%7d %7d/%7d [%d]\n", vcc->flags, sk->sk_err,
-		  atomic_read(&sk->sk_wmem_alloc), sk->sk_sndbuf,
-		  atomic_read(&sk->sk_rmem_alloc), sk->sk_rcvbuf,
+		  sk_wmem_alloc_get(sk), sk->sk_sndbuf,
+		  sk_rmem_alloc_get(sk), sk->sk_rcvbuf,
 		  atomic_read(&sk->sk_refcnt));
 }
 
diff --git a/net/atm/raw.c b/net/atm/raw.c
index b0a2d8cb674..cbfcc71a17b 100644
--- a/net/atm/raw.c
+++ b/net/atm/raw.c
@@ -33,7 +33,7 @@ static void atm_pop_raw(struct atm_vcc *vcc,struct sk_buff *skb)
 	struct sock *sk = sk_atm(vcc);
 
 	pr_debug("APopR (%d) %d -= %d\n", vcc->vci,
-		atomic_read(&sk->sk_wmem_alloc), skb->truesize);
+		sk_wmem_alloc_get(sk), skb->truesize);
 	atomic_sub(skb->truesize, &sk->sk_wmem_alloc);
 	dev_kfree_skb_any(skb);
 	sk->sk_write_space(sk);
diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c
index fd9d06f291d..da0f64f82b5 100644
--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -330,8 +330,7 @@ void ax25_destroy_socket(ax25_cb *ax25)
 	}
 
 	if (ax25->sk != NULL) {
-		if (atomic_read(&ax25->sk->sk_wmem_alloc) ||
-		    atomic_read(&ax25->sk->sk_rmem_alloc)) {
+		if (sk_has_allocations(ax25->sk)) {
 			/* Defer: outstanding buffers */
 			setup_timer(&ax25->dtimer, ax25_destroy_timer,
 					(unsigned long)ax25);
@@ -1691,7 +1690,8 @@ static int ax25_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 	switch (cmd) {
 	case TIOCOUTQ: {
 		long amount;
-		amount = sk->sk_sndbuf - atomic_read(&sk->sk_wmem_alloc);
+
+		amount = sk->sk_sndbuf - sk_wmem_alloc_get(sk);
 		if (amount < 0)
 			amount = 0;
 		res = put_user(amount, (int __user *)argp);
@@ -1781,8 +1781,8 @@ static int ax25_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 		ax25_info.idletimer = ax25_display_timer(&ax25->idletimer) / (60 * HZ);
 		ax25_info.n2count   = ax25->n2count;
 		ax25_info.state     = ax25->state;
-		ax25_info.rcv_q     = atomic_read(&sk->sk_rmem_alloc);
-		ax25_info.snd_q     = atomic_read(&sk->sk_wmem_alloc);
+		ax25_info.rcv_q     = sk_wmem_alloc_get(sk);
+		ax25_info.snd_q     = sk_rmem_alloc_get(sk);
 		ax25_info.vs        = ax25->vs;
 		ax25_info.vr        = ax25->vr;
 		ax25_info.va        = ax25->va;
@@ -1922,8 +1922,8 @@ static int ax25_info_show(struct seq_file *seq, void *v)
 
 	if (ax25->sk != NULL) {
 		seq_printf(seq, " %d %d %lu\n",
-			   atomic_read(&ax25->sk->sk_wmem_alloc),
-			   atomic_read(&ax25->sk->sk_rmem_alloc),
+			   sk_wmem_alloc_get(ax25->sk),
+			   sk_rmem_alloc_get(ax25->sk),
 			   sock_i_ino(ax25->sk));
 	} else {
 		seq_puts(seq, " * * *\n");
diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c
index 02b9baa1930..0250e060015 100644
--- a/net/bluetooth/af_bluetooth.c
+++ b/net/bluetooth/af_bluetooth.c
@@ -337,7 +337,7 @@ int bt_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 		if (sk->sk_state == BT_LISTEN)
 			return -EINVAL;
 
-		amount = sk->sk_sndbuf - atomic_read(&sk->sk_wmem_alloc);
+		amount = sk->sk_sndbuf - sk_wmem_alloc_get(sk);
 		if (amount < 0)
 			amount = 0;
 		err = put_user(amount, (int __user *) arg);
diff --git a/net/core/dev.c b/net/core/dev.c
index 576a61574a9..baf2dc13a34 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -3461,10 +3461,10 @@ void __dev_set_rx_mode(struct net_device *dev)
 		/* Unicast addresses changes may only happen under the rtnl,
 		 * therefore calling __dev_set_promiscuity here is safe.
 		 */
-		if (dev->uc_count > 0 && !dev->uc_promisc) {
+		if (dev->uc.count > 0 && !dev->uc_promisc) {
 			__dev_set_promiscuity(dev, 1);
 			dev->uc_promisc = 1;
-		} else if (dev->uc_count == 0 && dev->uc_promisc) {
+		} else if (dev->uc.count == 0 && dev->uc_promisc) {
 			__dev_set_promiscuity(dev, -1);
 			dev->uc_promisc = 0;
 		}
@@ -3483,9 +3483,8 @@ void dev_set_rx_mode(struct net_device *dev)
 
 /* hw addresses list handling functions */
 
-static int __hw_addr_add(struct list_head *list, int *delta,
-			 unsigned char *addr, int addr_len,
-			 unsigned char addr_type)
+static int __hw_addr_add(struct netdev_hw_addr_list *list, unsigned char *addr,
+			 int addr_len, unsigned char addr_type)
 {
 	struct netdev_hw_addr *ha;
 	int alloc_size;
@@ -3493,7 +3492,7 @@ static int __hw_addr_add(struct list_head *list, int *delta,
 	if (addr_len > MAX_ADDR_LEN)
 		return -EINVAL;
 
-	list_for_each_entry(ha, list, list) {
+	list_for_each_entry(ha, &list->list, list) {
 		if (!memcmp(ha->addr, addr, addr_len) &&
 		    ha->type == addr_type) {
 			ha->refcount++;
@@ -3512,9 +3511,8 @@ static int __hw_addr_add(struct list_head *list, int *delta,
 	ha->type = addr_type;
 	ha->refcount = 1;
 	ha->synced = false;
-	list_add_tail_rcu(&ha->list, list);
-	if (delta)
-		(*delta)++;
+	list_add_tail_rcu(&ha->list, &list->list);
+	list->count++;
 	return 0;
 }
 
@@ -3526,120 +3524,121 @@ static void ha_rcu_free(struct rcu_head *head)
 	kfree(ha);
 }
 
-static int __hw_addr_del(struct list_head *list, int *delta,
-			 unsigned char *addr, int addr_len,
-			 unsigned char addr_type)
+static int __hw_addr_del(struct netdev_hw_addr_list *list, unsigned char *addr,
+			 int addr_len, unsigned char addr_type)
 {
 	struct netdev_hw_addr *ha;
 
-	list_for_each_entry(ha, list, list) {
+	list_for_each_entry(ha, &list->list, list) {
 		if (!memcmp(ha->addr, addr, addr_len) &&
 		    (ha->type == addr_type || !addr_type)) {
 			if (--ha->refcount)
 				return 0;
 			list_del_rcu(&ha->list);
 			call_rcu(&ha->rcu_head, ha_rcu_free);
-			if (delta)
-				(*delta)--;
+			list->count--;
 			return 0;
 		}
 	}
 	return -ENOENT;
 }
 
-static int __hw_addr_add_multiple(struct list_head *to_list, int *to_delta,
-				  struct list_head *from_list, int addr_len,
+static int __hw_addr_add_multiple(struct netdev_hw_addr_list *to_list,
+				  struct netdev_hw_addr_list *from_list,
+				  int addr_len,
 				  unsigned char addr_type)
 {
 	int err;
 	struct netdev_hw_addr *ha, *ha2;
 	unsigned char type;
 
-	list_for_each_entry(ha, from_list, list) {
+	list_for_each_entry(ha, &from_list->list, list) {
 		type = addr_type ? addr_type : ha->type;
-		err = __hw_addr_add(to_list, to_delta, ha->addr,
-				    addr_len, type);
+		err = __hw_addr_add(to_list, ha->addr, addr_len, type);
 		if (err)
 			goto unroll;
 	}
 	return 0;
 
 unroll:
-	list_for_each_entry(ha2, from_list, list) {
+	list_for_each_entry(ha2, &from_list->list, list) {
 		if (ha2 == ha)
 			break;
 		type = addr_type ? addr_type : ha2->type;
-		__hw_addr_del(to_list, to_delta, ha2->addr,
-			      addr_len, type);
+		__hw_addr_del(to_list, ha2->addr, addr_len, type);
 	}
 	return err;
 }
 
-static void __hw_addr_del_multiple(struct list_head *to_list, int *to_delta,
-				   struct list_head *from_list, int addr_len,
+static void __hw_addr_del_multiple(struct netdev_hw_addr_list *to_list,
+				   struct netdev_hw_addr_list *from_list,
+				   int addr_len,
 				   unsigned char addr_type)
 {
 	struct netdev_hw_addr *ha;
 	unsigned char type;
 
-	list_for_each_entry(ha, from_list, list) {
+	list_for_each_entry(ha, &from_list->list, list) {
 		type = addr_type ? addr_type : ha->type;
-		__hw_addr_del(to_list, to_delta, ha->addr,
-			      addr_len, addr_type);
+		__hw_addr_del(to_list, ha->addr, addr_len, addr_type);
 	}
 }
 
-static int __hw_addr_sync(struct list_head *to_list, int *to_delta,
-			  struct list_head *from_list, int *from_delta,
+static int __hw_addr_sync(struct netdev_hw_addr_list *to_list,
+			  struct netdev_hw_addr_list *from_list,
 			  int addr_len)
 {
 	int err = 0;
 	struct netdev_hw_addr *ha, *tmp;
 
-	list_for_each_entry_safe(ha, tmp, from_list, list) {
+	list_for_each_entry_safe(ha, tmp, &from_list->list, list) {
 		if (!ha->synced) {
-			err = __hw_addr_add(to_list, to_delta, ha->addr,
+			err = __hw_addr_add(to_list, ha->addr,
 					    addr_len, ha->type);
 			if (err)
 				break;
 			ha->synced = true;
 			ha->refcount++;
 		} else if (ha->refcount == 1) {
-			__hw_addr_del(to_list, to_delta, ha->addr,
-				      addr_len, ha->type);
-			__hw_addr_del(from_list, from_delta, ha->addr,
-				      addr_len, ha->type);
+			__hw_addr_del(to_list, ha->addr, addr_len, ha->type);
+			__hw_addr_del(from_list, ha->addr, addr_len, ha->type);
 		}
 	}
 	return err;
 }
 
-static void __hw_addr_unsync(struct list_head *to_list, int *to_delta,
-			     struct list_head *from_list, int *from_delta,
+static void __hw_addr_unsync(struct netdev_hw_addr_list *to_list,
+			     struct netdev_hw_addr_list *from_list,
 			     int addr_len)
 {
 	struct netdev_hw_addr *ha, *tmp;
 
-	list_for_each_entry_safe(ha, tmp, from_list, list) {
+	list_for_each_entry_safe(ha, tmp, &from_list->list, list) {
 		if (ha->synced) {
-			__hw_addr_del(to_list, to_delta, ha->addr,
+			__hw_addr_del(to_list, ha->addr,
 				      addr_len, ha->type);
 			ha->synced = false;
-			__hw_addr_del(from_list, from_delta, ha->addr,
+			__hw_addr_del(from_list, ha->addr,
 				      addr_len, ha->type);
 		}
 	}
 }
 
-
-static void __hw_addr_flush(struct list_head *list)
+static void __hw_addr_flush(struct netdev_hw_addr_list *list)
 {
 	struct netdev_hw_addr *ha, *tmp;
 
-	list_for_each_entry_safe(ha, tmp, list, list) {
+	list_for_each_entry_safe(ha, tmp, &list->list, list) {
 		list_del_rcu(&ha->list);
 		call_rcu(&ha->rcu_head, ha_rcu_free);
 	}
+	list->count = 0;
+}
+
+static void __hw_addr_init(struct netdev_hw_addr_list *list)
+{
+	INIT_LIST_HEAD(&list->list);
+	list->count = 0;
 }
 
 /* Device addresses handling functions */
@@ -3648,7 +3647,7 @@ static void dev_addr_flush(struct net_device *dev)
 {
 	/* rtnl_mutex must be held here */
 
-	__hw_addr_flush(&dev->dev_addr_list);
+	__hw_addr_flush(&dev->dev_addrs);
 	dev->dev_addr = NULL;
 }
 
@@ -3660,16 +3659,16 @@ static int dev_addr_init(struct net_device *dev)
 
 	/* rtnl_mutex must be held here */
 
-	INIT_LIST_HEAD(&dev->dev_addr_list);
+	__hw_addr_init(&dev->dev_addrs);
 	memset(addr, 0, sizeof(addr));
-	err = __hw_addr_add(&dev->dev_addr_list, NULL, addr, sizeof(addr),
+	err = __hw_addr_add(&dev->dev_addrs, addr, sizeof(addr),
 			    NETDEV_HW_ADDR_T_LAN);
 	if (!err) {
 		/*
 		 * Get the first (previously created) address from the list
 		 * and set dev_addr pointer to this location.
 		 */
-		ha = list_first_entry(&dev->dev_addr_list,
+		ha = list_first_entry(&dev->dev_addrs.list,
 				      struct netdev_hw_addr, list);
 		dev->dev_addr = ha->addr;
 	}
@@ -3694,8 +3693,7 @@ int dev_addr_add(struct net_device *dev, unsigned char *addr,
 
 	ASSERT_RTNL();
 
-	err = __hw_addr_add(&dev->dev_addr_list, NULL, addr, dev->addr_len,
-			    addr_type);
+	err = __hw_addr_add(&dev->dev_addrs, addr, dev->addr_len, addr_type);
 	if (!err)
 		call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
 	return err;
@@ -3725,11 +3723,12 @@ int dev_addr_del(struct net_device *dev, unsigned char *addr,
 	 * We can not remove the first address from the list because
 	 * dev->dev_addr points to that.
 	 */
-	ha = list_first_entry(&dev->dev_addr_list, struct netdev_hw_addr, list);
+	ha = list_first_entry(&dev->dev_addrs.list,
+			      struct netdev_hw_addr, list);
 	if (ha->addr == dev->dev_addr && ha->refcount == 1)
 		return -ENOENT;
 
-	err = __hw_addr_del(&dev->dev_addr_list, NULL, addr, dev->addr_len,
+	err = __hw_addr_del(&dev->dev_addrs, addr, dev->addr_len,
 			    addr_type);
 	if (!err)
 		call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
@@ -3757,8 +3756,7 @@ int dev_addr_add_multiple(struct net_device *to_dev,
 
 	if (from_dev->addr_len != to_dev->addr_len)
 		return -EINVAL;
-	err = __hw_addr_add_multiple(&to_dev->dev_addr_list, NULL,
-				     &from_dev->dev_addr_list,
+	err = __hw_addr_add_multiple(&to_dev->dev_addrs, &from_dev->dev_addrs,
 				     to_dev->addr_len, addr_type);
 	if (!err)
 		call_netdevice_notifiers(NETDEV_CHANGEADDR, to_dev);
@@ -3784,15 +3782,14 @@ int dev_addr_del_multiple(struct net_device *to_dev,
 
 	if (from_dev->addr_len != to_dev->addr_len)
 		return -EINVAL;
-	__hw_addr_del_multiple(&to_dev->dev_addr_list, NULL,
-			       &from_dev->dev_addr_list,
+	__hw_addr_del_multiple(&to_dev->dev_addrs, &from_dev->dev_addrs,
 			       to_dev->addr_len, addr_type);
 	call_netdevice_notifiers(NETDEV_CHANGEADDR, to_dev);
 	return 0;
 }
 EXPORT_SYMBOL(dev_addr_del_multiple);
 
-/* unicast and multicast addresses handling functions */
+/* multicast addresses handling functions */
 
 int __dev_addr_delete(struct dev_addr_list **list, int *count,
 		      void *addr, int alen, int glbl)
@@ -3868,8 +3865,8 @@ int dev_unicast_delete(struct net_device *dev, void *addr)
 
 	ASSERT_RTNL();
 
-	err = __hw_addr_del(&dev->uc_list, &dev->uc_count, addr,
-			    dev->addr_len, NETDEV_HW_ADDR_T_UNICAST);
+	err = __hw_addr_del(&dev->uc, addr, dev->addr_len,
+			    NETDEV_HW_ADDR_T_UNICAST);
 	if (!err)
 		__dev_set_rx_mode(dev);
 	return err;
@@ -3892,8 +3889,8 @@ int dev_unicast_add(struct net_device *dev, void *addr)
 
 	ASSERT_RTNL();
 
-	err = __hw_addr_add(&dev->uc_list, &dev->uc_count, addr,
-			    dev->addr_len, NETDEV_HW_ADDR_T_UNICAST);
+	err = __hw_addr_add(&dev->uc, addr, dev->addr_len,
+			    NETDEV_HW_ADDR_T_UNICAST);
 	if (!err)
 		__dev_set_rx_mode(dev);
 	return err;
@@ -3966,8 +3963,7 @@ int dev_unicast_sync(struct net_device *to, struct net_device *from)
 	if (to->addr_len != from->addr_len)
 		return -EINVAL;
 
-	err = __hw_addr_sync(&to->uc_list, &to->uc_count,
-			     &from->uc_list, &from->uc_count, to->addr_len);
+	err = __hw_addr_sync(&to->uc, &from->uc, to->addr_len);
 	if (!err)
 		__dev_set_rx_mode(to);
 	return err;
@@ -3990,8 +3986,7 @@ void dev_unicast_unsync(struct net_device *to, struct net_device *from)
 	if (to->addr_len != from->addr_len)
 		return;
 
-	__hw_addr_unsync(&to->uc_list, &to->uc_count,
-			 &from->uc_list, &from->uc_count, to->addr_len);
+	__hw_addr_unsync(&to->uc, &from->uc, to->addr_len);
 	__dev_set_rx_mode(to);
 }
 EXPORT_SYMBOL(dev_unicast_unsync);
@@ -4000,15 +3995,14 @@ static void dev_unicast_flush(struct net_device *dev)
 {
 	/* rtnl_mutex must be held here */
 
-	__hw_addr_flush(&dev->uc_list);
-	dev->uc_count = 0;
+	__hw_addr_flush(&dev->uc);
 }
 
 static void dev_unicast_init(struct net_device *dev)
 {
 	/* rtnl_mutex must be held here */
 
-	INIT_LIST_HEAD(&dev->uc_list);
+	__hw_addr_init(&dev->uc);
 }
 
 
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 5c93435b034..9e0597d189b 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -204,6 +204,10 @@ struct sk_buff *__alloc_skb(unsigned int size, gfp_t gfp_mask,
 	skb->end = skb->tail + size;
 	kmemcheck_annotate_bitfield(skb, flags1);
 	kmemcheck_annotate_bitfield(skb, flags2);
+#ifdef NET_SKBUFF_DATA_USES_OFFSET
+	skb->mac_header = ~0U;
+#endif
+
 	/* make sure we initialize shinfo sequentially */
 	shinfo = skb_shinfo(skb);
 	atomic_set(&shinfo->dataref, 1);
@@ -665,7 +669,8 @@ static void copy_skb_header(struct sk_buff *new, const struct sk_buff *old)
 	/* {transport,network,mac}_header are relative to skb->head */
 	new->transport_header += offset;
 	new->network_header   += offset;
-	new->mac_header	      += offset;
+	if (skb_mac_header_was_set(new))
+		new->mac_header	      += offset;
 #endif
 	skb_shinfo(new)->gso_size = skb_shinfo(old)->gso_size;
 	skb_shinfo(new)->gso_segs = skb_shinfo(old)->gso_segs;
@@ -847,7 +852,8 @@ int pskb_expand_head(struct sk_buff *skb, int nhead, int ntail,
 	skb->tail	      += off;
 	skb->transport_header += off;
 	skb->network_header   += off;
-	skb->mac_header	      += off;
+	if (skb_mac_header_was_set(skb))
+		skb->mac_header += off;
 	skb->csum_start       += nhead;
 	skb->cloned   = 0;
 	skb->hdr_len  = 0;
@@ -939,7 +945,8 @@ struct sk_buff *skb_copy_expand(const struct sk_buff *skb,
 #ifdef NET_SKBUFF_DATA_USES_OFFSET
 	n->transport_header += off;
 	n->network_header   += off;
-	n->mac_header	    += off;
+	if (skb_mac_header_was_set(skb))
+		n->mac_header += off;
 #endif
 
 	return n;
diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c
index a5e3a593e47..d351b8db0df 100644
--- a/net/decnet/af_decnet.c
+++ b/net/decnet/af_decnet.c
@@ -1240,7 +1240,7 @@ static int dn_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 		return val;
 
 	case TIOCOUTQ:
-		amount = sk->sk_sndbuf - atomic_read(&sk->sk_wmem_alloc);
+		amount = sk->sk_sndbuf - sk_wmem_alloc_get(sk);
 		if (amount < 0)
 			amount = 0;
 		err = put_user(amount, (int __user *)arg);
diff --git a/net/econet/af_econet.c b/net/econet/af_econet.c
index 8121bf0029e..2e1f836d424 100644
--- a/net/econet/af_econet.c
+++ b/net/econet/af_econet.c
@@ -540,8 +540,7 @@ static void econet_destroy_timer(unsigned long data)
 {
 	struct sock *sk=(struct sock *)data;
 
-	if (!atomic_read(&sk->sk_wmem_alloc) &&
-	    !atomic_read(&sk->sk_rmem_alloc)) {
+	if (!sk_has_allocations(sk)) {
 		sk_free(sk);
 		return;
 	}
@@ -579,8 +578,7 @@ static int econet_release(struct socket *sock)
 
 	skb_queue_purge(&sk->sk_receive_queue);
 
-	if (atomic_read(&sk->sk_rmem_alloc) ||
-	    atomic_read(&sk->sk_wmem_alloc)) {
+	if (sk_has_allocations(sk)) {
 		sk->sk_timer.data     = (unsigned long)sk;
 		sk->sk_timer.expires  = jiffies + HZ;
 		sk->sk_timer.function = econet_destroy_timer;
diff --git a/net/ieee802154/af_ieee802154.c b/net/ieee802154/af_ieee802154.c
index 882a927cefa..3bb6bdb1dac 100644
--- a/net/ieee802154/af_ieee802154.c
+++ b/net/ieee802154/af_ieee802154.c
@@ -39,14 +39,6 @@
 
 #include "af802154.h"
 
-#define DBG_DUMP(data, len) { \
-	int i; \
-	pr_debug("function: %s: data: len %d:\n", __func__, len); \
-	for (i = 0; i < len; i++) {\
-		pr_debug("%02x: %02x\n", i, (data)[i]); \
-	} \
-}
-
 /*
  * Utility function for families
  */
@@ -302,10 +294,12 @@ static struct net_proto_family ieee802154_family_ops = {
 static int ieee802154_rcv(struct sk_buff *skb, struct net_device *dev,
 	struct packet_type *pt, struct net_device *orig_dev)
 {
-	DBG_DUMP(skb->data, skb->len);
 	if (!netif_running(dev))
 		return -ENODEV;
 	pr_debug("got frame, type %d, dev %p\n", dev->type, dev);
+#ifdef DEBUG
+	print_hex_dump_bytes("ieee802154_rcv ", DUMP_PREFIX_NONE, skb->data, skb->len);
+#endif
 
 	if (!net_eq(dev_net(dev), &init_net))
 		goto drop;
diff --git a/net/ieee802154/dgram.c b/net/ieee802154/dgram.c
index 1779677aed4..14d39840dd6 100644
--- a/net/ieee802154/dgram.c
+++ b/net/ieee802154/dgram.c
@@ -126,7 +126,8 @@ static int dgram_ioctl(struct sock *sk, int cmd, unsigned long arg)
 	switch (cmd) {
 	case SIOCOUTQ:
 	{
-		int amount = atomic_read(&sk->sk_wmem_alloc);
+		int amount = sk_wmem_alloc_get(sk);
+
 		return put_user(amount, (int __user *)arg);
 	}
 
diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
index d1a39b1277d..012cf5a6858 100644
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
@@ -391,13 +391,8 @@ static inline void tnode_free(struct tnode *tn)
 static void tnode_free_safe(struct tnode *tn)
 {
 	BUG_ON(IS_LEAF(tn));
-
-	if (node_parent((struct node *) tn)) {
-		tn->tnode_free = tnode_free_head;
-		tnode_free_head = tn;
-	} else {
-		tnode_free(tn);
-	}
+	tn->tnode_free = tnode_free_head;
+	tnode_free_head = tn;
 }
 
 static void tnode_free_flush(void)
@@ -1009,7 +1004,7 @@ fib_find_node(struct trie *t, u32 key)
 	return NULL;
 }
 
-static struct node *trie_rebalance(struct trie *t, struct tnode *tn)
+static void trie_rebalance(struct trie *t, struct tnode *tn)
 {
 	int wasfull;
 	t_key cindex, key;
@@ -1033,12 +1028,13 @@ static struct node *trie_rebalance(struct trie *t, struct tnode *tn)
 	}
 
 	/* Handle last (top) tnode */
-	if (IS_TNODE(tn)) {
+	if (IS_TNODE(tn))
 		tn = (struct tnode *)resize(t, (struct tnode *)tn);
-		tnode_free_flush();
-	}
 
-	return (struct node *)tn;
+	rcu_assign_pointer(t->trie, (struct node *)tn);
+	tnode_free_flush();
+
+	return;
 }
 
 /* only used from updater-side */
@@ -1186,7 +1182,7 @@ static struct list_head *fib_insert_node(struct trie *t, u32 key, int plen)
 
 	/* Rebalance the trie */
 
-	rcu_assign_pointer(t->trie, trie_rebalance(t, tp));
+	trie_rebalance(t, tp);
 done:
 	return fa_head;
 }
@@ -1605,7 +1601,7 @@ static void trie_leaf_remove(struct trie *t, struct leaf *l)
 	if (tp) {
 		t_key cindex = tkey_extract_bits(l->key, tp->pos, tp->bits);
 		put_child(t, (struct tnode *)tp, cindex, NULL);
-		rcu_assign_pointer(t->trie, trie_rebalance(t, tp));
+		trie_rebalance(t, tp);
 	} else
 		rcu_assign_pointer(t->trie, NULL);
 
diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c
index b0b273503e2..a706a47f4db 100644
--- a/net/ipv4/inet_diag.c
+++ b/net/ipv4/inet_diag.c
@@ -156,10 +156,10 @@ static int inet_csk_diag_fill(struct sock *sk,
 	r->idiag_inode = sock_i_ino(sk);
 
 	if (minfo) {
-		minfo->idiag_rmem = atomic_read(&sk->sk_rmem_alloc);
+		minfo->idiag_rmem = sk_rmem_alloc_get(sk);
 		minfo->idiag_wmem = sk->sk_wmem_queued;
 		minfo->idiag_fmem = sk->sk_forward_alloc;
-		minfo->idiag_tmem = atomic_read(&sk->sk_wmem_alloc);
+		minfo->idiag_tmem = sk_wmem_alloc_get(sk);
 	}
 
 	handler->idiag_get_info(sk, r, info);
diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c
index 3dc9171a272..2979f14bb18 100644
--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -799,7 +799,8 @@ static int raw_ioctl(struct sock *sk, int cmd, unsigned long arg)
 {
 	switch (cmd) {
 		case SIOCOUTQ: {
-			int amount = atomic_read(&sk->sk_wmem_alloc);
+			int amount = sk_wmem_alloc_get(sk);
+
 			return put_user(amount, (int __user *)arg);
 		}
 		case SIOCINQ: {
@@ -935,8 +936,8 @@ static void raw_sock_seq_show(struct seq_file *seq, struct sock *sp, int i)
 	seq_printf(seq, "%4d: %08X:%04X %08X:%04X"
 		" %02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p %d\n",
 		i, src, srcp, dest, destp, sp->sk_state,
-		atomic_read(&sp->sk_wmem_alloc),
-		atomic_read(&sp->sk_rmem_alloc),
+		sk_wmem_alloc_get(sp),
+		sk_rmem_alloc_get(sp),
 		0, 0L, 0, sock_i_uid(sp), 0, sock_i_ino(sp),
 		atomic_read(&sp->sk_refcnt), sp, atomic_read(&sp->sk_drops));
 }
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index cd76b3cb709..65b3a8b11a6 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -1085,8 +1085,16 @@ restart:
 	now = jiffies;
 
 	if (!rt_caching(dev_net(rt->u.dst.dev))) {
-		rt_drop(rt);
-		return 0;
+		/*
+		 * If we're not caching, just tell the caller we
+		 * were successful and don't touch the route.  The
+		 * caller hold the sole reference to the cache entry, and
+		 * it will be released when the caller is done with it.
+		 * If we drop it here, the callers have no way to resolve routes
+		 * when we're not caching.  Instead, just point *rp at rt, so
+		 * the caller gets a single use out of the route
+		 */
+		goto report_and_exit;
 	}
 
 	rthp = &rt_hash_table[hash].chain;
@@ -1217,6 +1225,8 @@ restart:
 	rcu_assign_pointer(rt_hash_table[hash].chain, rt);
 
 	spin_unlock_bh(rt_hash_lock_addr(hash));
+
+report_and_exit:
 	if (rp)
 		*rp = rt;
 	else
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 8f4158d7c9a..80e3812837a 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -840,7 +840,8 @@ int udp_ioctl(struct sock *sk, int cmd, unsigned long arg)
 	switch (cmd) {
 	case SIOCOUTQ:
 	{
-		int amount = atomic_read(&sk->sk_wmem_alloc);
+		int amount = sk_wmem_alloc_get(sk);
+
 		return put_user(amount, (int __user *)arg);
 	}
 
@@ -1721,8 +1722,8 @@ static void udp4_format_sock(struct sock *sp, struct seq_file *f,
 	seq_printf(f, "%4d: %08X:%04X %08X:%04X"
 		" %02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p %d%n",
 		bucket, src, srcp, dest, destp, sp->sk_state,
-		atomic_read(&sp->sk_wmem_alloc),
-		atomic_read(&sp->sk_rmem_alloc),
+		sk_wmem_alloc_get(sp),
+		sk_rmem_alloc_get(sp),
 		0, 0L, 0, sock_i_uid(sp), 0, sock_i_ino(sp),
 		atomic_read(&sp->sk_refcnt), sp,
 		atomic_read(&sp->sk_drops), len);
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index 36a090d87a3..8b0b6f94806 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -1130,7 +1130,8 @@ static int rawv6_ioctl(struct sock *sk, int cmd, unsigned long arg)
 	switch(cmd) {
 		case SIOCOUTQ:
 		{
-			int amount = atomic_read(&sk->sk_wmem_alloc);
+			int amount = sk_wmem_alloc_get(sk);
+
 			return put_user(amount, (int __user *)arg);
 		}
 		case SIOCINQ:
@@ -1236,8 +1237,8 @@ static void raw6_sock_seq_show(struct seq_file *seq, struct sock *sp, int i)
 		   dest->s6_addr32[0], dest->s6_addr32[1],
 		   dest->s6_addr32[2], dest->s6_addr32[3], destp,
 		   sp->sk_state,
-		   atomic_read(&sp->sk_wmem_alloc),
-		   atomic_read(&sp->sk_rmem_alloc),
+		   sk_wmem_alloc_get(sp),
+		   sk_rmem_alloc_get(sp),
 		   0, 0L, 0,
 		   sock_i_uid(sp), 0,
 		   sock_i_ino(sp),
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index fc333d85472..023beda6b22 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -1061,8 +1061,8 @@ static void udp6_sock_seq_show(struct seq_file *seq, struct sock *sp, int bucket
 		   dest->s6_addr32[0], dest->s6_addr32[1],
 		   dest->s6_addr32[2], dest->s6_addr32[3], destp,
 		   sp->sk_state,
-		   atomic_read(&sp->sk_wmem_alloc),
-		   atomic_read(&sp->sk_rmem_alloc),
+		   sk_wmem_alloc_get(sp),
+		   sk_rmem_alloc_get(sp),
 		   0, 0L, 0,
 		   sock_i_uid(sp), 0,
 		   sock_i_ino(sp),
diff --git a/net/ipx/af_ipx.c b/net/ipx/af_ipx.c
index 1627050e29f..417b0e30949 100644
--- a/net/ipx/af_ipx.c
+++ b/net/ipx/af_ipx.c
@@ -1835,7 +1835,7 @@ static int ipx_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 
 	switch (cmd) {
 	case TIOCOUTQ:
-		amount = sk->sk_sndbuf - atomic_read(&sk->sk_wmem_alloc);
+		amount = sk->sk_sndbuf - sk_wmem_alloc_get(sk);
 		if (amount < 0)
 			amount = 0;
 		rc = put_user(amount, (int __user *)argp);
diff --git a/net/ipx/ipx_proc.c b/net/ipx/ipx_proc.c
index 5ed97ad0e2e..576178482f8 100644
--- a/net/ipx/ipx_proc.c
+++ b/net/ipx/ipx_proc.c
@@ -280,8 +280,8 @@ static int ipx_seq_socket_show(struct seq_file *seq, void *v)
 	}
 
 	seq_printf(seq, "%08X  %08X  %02X     %03d\n",
-		   atomic_read(&s->sk_wmem_alloc),
-		   atomic_read(&s->sk_rmem_alloc),
+		   sk_wmem_alloc_get(s),
+		   sk_rmem_alloc_get(s),
 		   s->sk_state, SOCK_INODE(s->sk_socket)->i_uid);
 out:
 	return 0;
diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c
index 3eb5bcc75f9..5922febe25c 100644
--- a/net/irda/af_irda.c
+++ b/net/irda/af_irda.c
@@ -1762,7 +1762,8 @@ static int irda_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 	switch (cmd) {
 	case TIOCOUTQ: {
 		long amount;
-		amount = sk->sk_sndbuf - atomic_read(&sk->sk_wmem_alloc);
+
+		amount = sk->sk_sndbuf - sk_wmem_alloc_get(sk);
 		if (amount < 0)
 			amount = 0;
 		if (put_user(amount, (unsigned int __user *)arg))
diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c
index 656cbd19582..6be5f92d109 100644
--- a/net/iucv/af_iucv.c
+++ b/net/iucv/af_iucv.c
@@ -54,6 +54,38 @@ static const u8 iprm_shutdown[8] =
 #define CB_TRGCLS(skb)	((skb)->cb + CB_TAG_LEN) /* iucv msg target class */
 #define CB_TRGCLS_LEN	(TRGCLS_SIZE)
 
+#define __iucv_sock_wait(sk, condition, timeo, ret)			\
+do {									\
+	DEFINE_WAIT(__wait);						\
+	long __timeo = timeo;						\
+	ret = 0;							\
+	while (!(condition)) {						\
+		prepare_to_wait(sk->sk_sleep, &__wait, TASK_INTERRUPTIBLE); \
+		if (!__timeo) {						\
+			ret = -EAGAIN;					\
+			break;						\
+		}							\
+		if (signal_pending(current)) {				\
+			ret = sock_intr_errno(__timeo);			\
+			break;						\
+		}							\
+		release_sock(sk);					\
+		__timeo = schedule_timeout(__timeo);			\
+		lock_sock(sk);						\
+		ret = sock_error(sk);					\
+		if (ret)						\
+			break;						\
+	}								\
+	finish_wait(sk->sk_sleep, &__wait);				\
+} while (0)
+
+#define iucv_sock_wait(sk, condition, timeo)				\
+({									\
+	int __ret = 0;							\
+	if (!(condition))						\
+		__iucv_sock_wait(sk, condition, timeo, __ret);		\
+	__ret;								\
+})
 
 static void iucv_sock_kill(struct sock *sk);
 static void iucv_sock_close(struct sock *sk);
@@ -238,6 +270,48 @@ static inline size_t iucv_msg_length(struct iucv_message *msg)
 	return msg->length;
 }
 
+/**
+ * iucv_sock_in_state() - check for specific states
+ * @sk:		sock structure
+ * @state:	first iucv sk state
+ * @state:	second iucv sk state
+ *
+ * Returns true if the socket in either in the first or second state.
+ */
+static int iucv_sock_in_state(struct sock *sk, int state, int state2)
+{
+	return (sk->sk_state == state || sk->sk_state == state2);
+}
+
+/**
+ * iucv_below_msglim() - function to check if messages can be sent
+ * @sk:		sock structure
+ *
+ * Returns true if the send queue length is lower than the message limit.
+ * Always returns true if the socket is not connected (no iucv path for
+ * checking the message limit).
+ */
+static inline int iucv_below_msglim(struct sock *sk)
+{
+	struct iucv_sock *iucv = iucv_sk(sk);
+
+	if (sk->sk_state != IUCV_CONNECTED)
+		return 1;
+	return (skb_queue_len(&iucv->send_skb_q) < iucv->path->msglim);
+}
+
+/**
+ * iucv_sock_wake_msglim() - Wake up thread waiting on msg limit
+ */
+static void iucv_sock_wake_msglim(struct sock *sk)
+{
+	read_lock(&sk->sk_callback_lock);
+	if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+		wake_up_interruptible_all(sk->sk_sleep);
+	sk_wake_async(sk, SOCK_WAKE_SPACE, POLL_OUT);
+	read_unlock(&sk->sk_callback_lock);
+}
+
 /* Timers */
 static void iucv_sock_timeout(unsigned long arg)
 {
@@ -329,7 +403,9 @@ static void iucv_sock_close(struct sock *sk)
 				timeo = sk->sk_lingertime;
 			else
 				timeo = IUCV_DISCONN_TIMEOUT;
-			err = iucv_sock_wait_state(sk, IUCV_CLOSED, 0, timeo);
+			err = iucv_sock_wait(sk,
+					iucv_sock_in_state(sk, IUCV_CLOSED, 0),
+					timeo);
 		}
 
 	case IUCV_CLOSING:   /* fall through */
@@ -510,39 +586,6 @@ struct sock *iucv_accept_dequeue(struct sock *parent, struct socket *newsock)
 	return NULL;
 }
 
-int iucv_sock_wait_state(struct sock *sk, int state, int state2,
-			 unsigned long timeo)
-{
-	DECLARE_WAITQUEUE(wait, current);
-	int err = 0;
-
-	add_wait_queue(sk->sk_sleep, &wait);
-	while (sk->sk_state != state && sk->sk_state != state2) {
-		set_current_state(TASK_INTERRUPTIBLE);
-
-		if (!timeo) {
-			err = -EAGAIN;
-			break;
-		}
-
-		if (signal_pending(current)) {
-			err = sock_intr_errno(timeo);
-			break;
-		}
-
-		release_sock(sk);
-		timeo = schedule_timeout(timeo);
-		lock_sock(sk);
-
-		err = sock_error(sk);
-		if (err)
-			break;
-	}
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(sk->sk_sleep, &wait);
-	return err;
-}
-
 /* Bind an unbound socket */
 static int iucv_sock_bind(struct socket *sock, struct sockaddr *addr,
 			  int addr_len)
@@ -687,8 +730,9 @@ static int iucv_sock_connect(struct socket *sock, struct sockaddr *addr,
 	}
 
 	if (sk->sk_state != IUCV_CONNECTED) {
-		err = iucv_sock_wait_state(sk, IUCV_CONNECTED, IUCV_DISCONN,
-				sock_sndtimeo(sk, flags & O_NONBLOCK));
+		err = iucv_sock_wait(sk, iucv_sock_in_state(sk, IUCV_CONNECTED,
+							    IUCV_DISCONN),
+				     sock_sndtimeo(sk, flags & O_NONBLOCK));
 	}
 
 	if (sk->sk_state == IUCV_DISCONN) {
@@ -842,9 +886,11 @@ static int iucv_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
 	struct iucv_message txmsg;
 	struct cmsghdr *cmsg;
 	int cmsg_done;
+	long timeo;
 	char user_id[9];
 	char appl_id[9];
 	int err;
+	int noblock = msg->msg_flags & MSG_DONTWAIT;
 
 	err = sock_error(sk);
 	if (err)
@@ -864,108 +910,119 @@ static int iucv_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
 		goto out;
 	}
 
-	if (sk->sk_state == IUCV_CONNECTED) {
-		/* initialize defaults */
-		cmsg_done   = 0;	/* check for duplicate headers */
-		txmsg.class = 0;
+	/* Return if the socket is not in connected state */
+	if (sk->sk_state != IUCV_CONNECTED) {
+		err = -ENOTCONN;
+		goto out;
+	}
 
-		/* iterate over control messages */
-		for (cmsg = CMSG_FIRSTHDR(msg); cmsg;
-		     cmsg = CMSG_NXTHDR(msg, cmsg)) {
+	/* initialize defaults */
+	cmsg_done   = 0;	/* check for duplicate headers */
+	txmsg.class = 0;
 
-			if (!CMSG_OK(msg, cmsg)) {
-				err = -EINVAL;
-				goto out;
-			}
+	/* iterate over control messages */
+	for (cmsg = CMSG_FIRSTHDR(msg); cmsg;
+		cmsg = CMSG_NXTHDR(msg, cmsg)) {
+
+		if (!CMSG_OK(msg, cmsg)) {
+			err = -EINVAL;
+			goto out;
+		}
+
+		if (cmsg->cmsg_level != SOL_IUCV)
+			continue;
 
-			if (cmsg->cmsg_level != SOL_IUCV)
-				continue;
+		if (cmsg->cmsg_type & cmsg_done) {
+			err = -EINVAL;
+			goto out;
+		}
+		cmsg_done |= cmsg->cmsg_type;
 
-			if (cmsg->cmsg_type & cmsg_done) {
+		switch (cmsg->cmsg_type) {
+		case SCM_IUCV_TRGCLS:
+			if (cmsg->cmsg_len != CMSG_LEN(TRGCLS_SIZE)) {
 				err = -EINVAL;
 				goto out;
 			}
-			cmsg_done |= cmsg->cmsg_type;
-
-			switch (cmsg->cmsg_type) {
-			case SCM_IUCV_TRGCLS:
-				if (cmsg->cmsg_len != CMSG_LEN(TRGCLS_SIZE)) {
-					err = -EINVAL;
-					goto out;
-				}
 
-				/* set iucv message target class */
-				memcpy(&txmsg.class,
-					(void *) CMSG_DATA(cmsg), TRGCLS_SIZE);
+			/* set iucv message target class */
+			memcpy(&txmsg.class,
+				(void *) CMSG_DATA(cmsg), TRGCLS_SIZE);
 
-				break;
+			break;
 
-			default:
-				err = -EINVAL;
-				goto out;
-				break;
-			}
+		default:
+			err = -EINVAL;
+			goto out;
+			break;
 		}
+	}
 
-		/* allocate one skb for each iucv message:
-		 * this is fine for SOCK_SEQPACKET (unless we want to support
-		 * segmented records using the MSG_EOR flag), but
-		 * for SOCK_STREAM we might want to improve it in future */
-		if (!(skb = sock_alloc_send_skb(sk, len,
-						msg->msg_flags & MSG_DONTWAIT,
-						&err)))
-			goto out;
+	/* allocate one skb for each iucv message:
+	 * this is fine for SOCK_SEQPACKET (unless we want to support
+	 * segmented records using the MSG_EOR flag), but
+	 * for SOCK_STREAM we might want to improve it in future */
+	skb = sock_alloc_send_skb(sk, len, noblock, &err);
+	if (!skb)
+		goto out;
+	if (memcpy_fromiovec(skb_put(skb, len), msg->msg_iov, len)) {
+		err = -EFAULT;
+		goto fail;
+	}
 
-		if (memcpy_fromiovec(skb_put(skb, len), msg->msg_iov, len)) {
-			err = -EFAULT;
-			goto fail;
-		}
+	/* wait if outstanding messages for iucv path has reached */
+	timeo = sock_sndtimeo(sk, noblock);
+	err = iucv_sock_wait(sk, iucv_below_msglim(sk), timeo);
+	if (err)
+		goto fail;
 
-		/* increment and save iucv message tag for msg_completion cbk */
-		txmsg.tag = iucv->send_tag++;
-		memcpy(CB_TAG(skb), &txmsg.tag, CB_TAG_LEN);
-		skb_queue_tail(&iucv->send_skb_q, skb);
+	/* return -ECONNRESET if the socket is no longer connected */
+	if (sk->sk_state != IUCV_CONNECTED) {
+		err = -ECONNRESET;
+		goto fail;
+	}
 
-		if (((iucv->path->flags & IUCV_IPRMDATA) & iucv->flags)
-		    && skb->len <= 7) {
-			err = iucv_send_iprm(iucv->path, &txmsg, skb);
+	/* increment and save iucv message tag for msg_completion cbk */
+	txmsg.tag = iucv->send_tag++;
+	memcpy(CB_TAG(skb), &txmsg.tag, CB_TAG_LEN);
+	skb_queue_tail(&iucv->send_skb_q, skb);
 
-			/* on success: there is no message_complete callback
-			 * for an IPRMDATA msg; remove skb from send queue */
-			if (err == 0) {
-				skb_unlink(skb, &iucv->send_skb_q);
-				kfree_skb(skb);
-			}
+	if (((iucv->path->flags & IUCV_IPRMDATA) & iucv->flags)
+	      && skb->len <= 7) {
+		err = iucv_send_iprm(iucv->path, &txmsg, skb);
 
-			/* this error should never happen since the
-			 * IUCV_IPRMDATA path flag is set... sever path */
-			if (err == 0x15) {
-				iucv_path_sever(iucv->path, NULL);
-				skb_unlink(skb, &iucv->send_skb_q);
-				err = -EPIPE;
-				goto fail;
-			}
-		} else
-			err = iucv_message_send(iucv->path, &txmsg, 0, 0,
-						(void *) skb->data, skb->len);
-		if (err) {
-			if (err == 3) {
-				user_id[8] = 0;
-				memcpy(user_id, iucv->dst_user_id, 8);
-				appl_id[8] = 0;
-				memcpy(appl_id, iucv->dst_name, 8);
-				pr_err("Application %s on z/VM guest %s"
-				       " exceeds message limit\n",
-				       user_id, appl_id);
-			}
+		/* on success: there is no message_complete callback
+		 * for an IPRMDATA msg; remove skb from send queue */
+		if (err == 0) {
+			skb_unlink(skb, &iucv->send_skb_q);
+			kfree_skb(skb);
+		}
+
+		/* this error should never happen since the
+		 * IUCV_IPRMDATA path flag is set... sever path */
+		if (err == 0x15) {
+			iucv_path_sever(iucv->path, NULL);
 			skb_unlink(skb, &iucv->send_skb_q);
 			err = -EPIPE;
 			goto fail;
 		}
-
-	} else {
-		err = -ENOTCONN;
-		goto out;
+	} else
+		err = iucv_message_send(iucv->path, &txmsg, 0, 0,
+					(void *) skb->data, skb->len);
+	if (err) {
+		if (err == 3) {
+			user_id[8] = 0;
+			memcpy(user_id, iucv->dst_user_id, 8);
+			appl_id[8] = 0;
+			memcpy(appl_id, iucv->dst_name, 8);
+			pr_err("Application %s on z/VM guest %s"
+				" exceeds message limit\n",
+				appl_id, user_id);
+			err = -EAGAIN;
+		} else
+			err = -EPIPE;
+		skb_unlink(skb, &iucv->send_skb_q);
+		goto fail;
 	}
 
 	release_sock(sk);
@@ -1581,7 +1638,11 @@ static void iucv_callback_txdone(struct iucv_path *path,
 
 		spin_unlock_irqrestore(&list->lock, flags);
 
-		kfree_skb(this);
+		if (this) {
+			kfree_skb(this);
+			/* wake up any process waiting for sending */
+			iucv_sock_wake_msglim(sk);
+		}
 	}
 	BUG_ON(!this);
 
diff --git a/net/key/af_key.c b/net/key/af_key.c
index 643c1be2d02..dba9abd27f9 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -3662,8 +3662,8 @@ static int pfkey_seq_show(struct seq_file *f, void *v)
 		seq_printf(f ,"%p %-6d %-6u %-6u %-6u %-6lu\n",
 			       s,
 			       atomic_read(&s->sk_refcnt),
-			       atomic_read(&s->sk_rmem_alloc),
-			       atomic_read(&s->sk_wmem_alloc),
+			       sk_rmem_alloc_get(s),
+			       sk_wmem_alloc_get(s),
 			       sock_i_uid(s),
 			       sock_i_ino(s)
 			       );
diff --git a/net/llc/llc_proc.c b/net/llc/llc_proc.c
index d208b3396d9..f97be471fe2 100644
--- a/net/llc/llc_proc.c
+++ b/net/llc/llc_proc.c
@@ -134,8 +134,8 @@ static int llc_seq_socket_show(struct seq_file *seq, void *v)
 	seq_printf(seq, "@%02X ", llc->sap->laddr.lsap);
 	llc_ui_format_mac(seq, llc->daddr.mac);
 	seq_printf(seq, "@%02X %8d %8d %2d %3d %4d\n", llc->daddr.lsap,
-		   atomic_read(&sk->sk_wmem_alloc),
-		   atomic_read(&sk->sk_rmem_alloc) - llc->copied_seq,
+		   sk_wmem_alloc_get(sk),
+		   sk_rmem_alloc_get(sk) - llc->copied_seq,
 		   sk->sk_state,
 		   sk->sk_socket ? SOCK_INODE(sk->sk_socket)->i_uid : -1,
 		   llc->link);
diff --git a/net/mac80211/debugfs.c b/net/mac80211/debugfs.c
index 11c72311f35..6c439cd5cce 100644
--- a/net/mac80211/debugfs.c
+++ b/net/mac80211/debugfs.c
@@ -163,6 +163,29 @@ static const struct file_operations noack_ops = {
 	.open = mac80211_open_file_generic
 };
 
+static ssize_t queues_read(struct file *file, char __user *user_buf,
+			   size_t count, loff_t *ppos)
+{
+	struct ieee80211_local *local = file->private_data;
+	unsigned long flags;
+	char buf[IEEE80211_MAX_QUEUES * 20];
+	int q, res = 0;
+
+	spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
+	for (q = 0; q < local->hw.queues; q++)
+		res += sprintf(buf + res, "%02d: %#.8lx/%d\n", q,
+				local->queue_stop_reasons[q],
+				__netif_subqueue_stopped(local->mdev, q));
+	spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, res);
+}
+
+static const struct file_operations queues_ops = {
+	.read = queues_read,
+	.open = mac80211_open_file_generic
+};
+
 /* statistics stuff */
 
 #define DEBUGFS_STATS_FILE(name, buflen, fmt, value...)			\
@@ -298,6 +321,7 @@ void debugfs_hw_add(struct ieee80211_local *local)
 	DEBUGFS_ADD(total_ps_buffered);
 	DEBUGFS_ADD(wep_iv);
 	DEBUGFS_ADD(tsf);
+	DEBUGFS_ADD(queues);
 	DEBUGFS_ADD_MODE(reset, 0200);
 	DEBUGFS_ADD(noack);
 
@@ -350,6 +374,7 @@ void debugfs_hw_del(struct ieee80211_local *local)
 	DEBUGFS_DEL(total_ps_buffered);
 	DEBUGFS_DEL(wep_iv);
 	DEBUGFS_DEL(tsf);
+	DEBUGFS_DEL(queues);
 	DEBUGFS_DEL(reset);
 	DEBUGFS_DEL(noack);
 
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 4dbc2896419..68eb5052179 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -783,6 +783,7 @@ struct ieee80211_local {
 		struct dentry *total_ps_buffered;
 		struct dentry *wep_iv;
 		struct dentry *tsf;
+		struct dentry *queues;
 		struct dentry *reset;
 		struct dentry *noack;
 		struct dentry *statistics;
@@ -1100,7 +1101,6 @@ void ieee802_11_parse_elems(u8 *start, size_t len,
 u32 ieee802_11_parse_elems_crc(u8 *start, size_t len,
 			       struct ieee802_11_elems *elems,
 			       u64 filter, u32 crc);
-int ieee80211_set_freq(struct ieee80211_sub_if_data *sdata, int freq);
 u32 ieee80211_mandatory_rates(struct ieee80211_local *local,
 			      enum ieee80211_band band);
 
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index d779c57a822..aca22b00b6a 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1102,14 +1102,6 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
 	struct sta_info *sta;
 	u32 changed = 0, config_changed = 0;
 
-	rcu_read_lock();
-
-	sta = sta_info_get(local, ifmgd->bssid);
-	if (!sta) {
-		rcu_read_unlock();
-		return;
-	}
-
 	if (deauth) {
 		ifmgd->direct_probe_tries = 0;
 		ifmgd->auth_tries = 0;
@@ -1120,7 +1112,11 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
 	netif_tx_stop_all_queues(sdata->dev);
 	netif_carrier_off(sdata->dev);
 
-	ieee80211_sta_tear_down_BA_sessions(sta);
+	rcu_read_lock();
+	sta = sta_info_get(local, ifmgd->bssid);
+	if (sta)
+		ieee80211_sta_tear_down_BA_sessions(sta);
+	rcu_read_unlock();
 
 	bss = ieee80211_rx_bss_get(local, ifmgd->bssid,
 				   conf->channel->center_freq,
@@ -1156,8 +1152,6 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
 				ifmgd->ssid, ifmgd->ssid_len);
 	}
 
-	rcu_read_unlock();
-
 	ieee80211_set_wmm_default(sdata);
 
 	ieee80211_recalc_idle(local);
@@ -2223,7 +2217,10 @@ static int ieee80211_sta_config_auth(struct ieee80211_sub_if_data *sdata)
 				       capa_mask, capa_val);
 
 	if (bss) {
-		ieee80211_set_freq(sdata, bss->cbss.channel->center_freq);
+		local->oper_channel = bss->cbss.channel;
+		local->oper_channel_type = NL80211_CHAN_NO_HT;
+		ieee80211_hw_config(local, 0);
+
 		if (!(ifmgd->flags & IEEE80211_STA_SSID_SET))
 			ieee80211_sta_set_ssid(sdata, bss->ssid,
 					       bss->ssid_len);
@@ -2445,6 +2442,14 @@ void ieee80211_sta_req_auth(struct ieee80211_sub_if_data *sdata)
 			ieee80211_set_disassoc(sdata, true, true,
 					       WLAN_REASON_DEAUTH_LEAVING);
 
+		if (ifmgd->ssid_len == 0) {
+			/*
+			 * Only allow association to be started if a valid SSID
+			 * is configured.
+			 */
+			return;
+		}
+
 		if (!(ifmgd->flags & IEEE80211_STA_EXT_SME) ||
 		    ifmgd->state != IEEE80211_STA_MLME_ASSOCIATE)
 			set_bit(IEEE80211_STA_REQ_AUTH, &ifmgd->request);
@@ -2476,6 +2481,10 @@ int ieee80211_sta_set_ssid(struct ieee80211_sub_if_data *sdata, char *ssid, size
 	ifmgd = &sdata->u.mgd;
 
 	if (ifmgd->ssid_len != len || memcmp(ifmgd->ssid, ssid, len) != 0) {
+		if (ifmgd->state == IEEE80211_STA_MLME_ASSOCIATED)
+			ieee80211_set_disassoc(sdata, true, true,
+					       WLAN_REASON_DEAUTH_LEAVING);
+
 		/*
 		 * Do not use reassociation if SSID is changed (different ESS).
 		 */
@@ -2500,6 +2509,11 @@ int ieee80211_sta_set_bssid(struct ieee80211_sub_if_data *sdata, u8 *bssid)
 {
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 
+	if (compare_ether_addr(bssid, ifmgd->bssid) != 0 &&
+	    ifmgd->state == IEEE80211_STA_MLME_ASSOCIATED)
+		ieee80211_set_disassoc(sdata, true, true,
+				       WLAN_REASON_DEAUTH_LEAVING);
+
 	if (is_valid_ether_addr(bssid)) {
 		memcpy(ifmgd->bssid, bssid, ETH_ALEN);
 		ifmgd->flags |= IEEE80211_STA_BSSID_SET;
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 66ce96a69f3..915e7776931 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -774,31 +774,6 @@ void ieee80211_tx_skb(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
 	dev_queue_xmit(skb);
 }
 
-int ieee80211_set_freq(struct ieee80211_sub_if_data *sdata, int freqMHz)
-{
-	int ret = -EINVAL;
-	struct ieee80211_channel *chan;
-	struct ieee80211_local *local = sdata->local;
-
-	chan = ieee80211_get_channel(local->hw.wiphy, freqMHz);
-
-	if (chan && !(chan->flags & IEEE80211_CHAN_DISABLED)) {
-		if (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
-		    chan->flags & IEEE80211_CHAN_NO_IBSS)
-			return ret;
-		local->oper_channel = chan;
-		local->oper_channel_type = NL80211_CHAN_NO_HT;
-
-		if (local->sw_scanning || local->hw_scanning)
-			ret = 0;
-		else
-			ret = ieee80211_hw_config(
-				local, IEEE80211_CONF_CHANGE_CHANNEL);
-	}
-
-	return ret;
-}
-
 u32 ieee80211_mandatory_rates(struct ieee80211_local *local,
 			      enum ieee80211_band band)
 {
diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c
index d2d81b10334..1da81f45674 100644
--- a/net/mac80211/wext.c
+++ b/net/mac80211/wext.c
@@ -55,6 +55,8 @@ static int ieee80211_ioctl_siwfreq(struct net_device *dev,
 				   struct iw_freq *freq, char *extra)
 {
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_channel *chan;
 
 	if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
 		return cfg80211_ibss_wext_siwfreq(dev, info, freq, extra);
@@ -69,17 +71,38 @@ static int ieee80211_ioctl_siwfreq(struct net_device *dev,
 					IEEE80211_STA_AUTO_CHANNEL_SEL;
 			return 0;
 		} else
-			return ieee80211_set_freq(sdata,
+			chan = ieee80211_get_channel(local->hw.wiphy,
 				ieee80211_channel_to_frequency(freq->m));
 	} else {
 		int i, div = 1000000;
 		for (i = 0; i < freq->e; i++)
 			div /= 10;
-		if (div > 0)
-			return ieee80211_set_freq(sdata, freq->m / div);
-		else
+		if (div <= 0)
 			return -EINVAL;
+		chan = ieee80211_get_channel(local->hw.wiphy, freq->m / div);
 	}
+
+	if (!chan)
+		return -EINVAL;
+
+	if (chan->flags & IEEE80211_CHAN_DISABLED)
+		return -EINVAL;
+
+	/*
+	 * no change except maybe auto -> fixed, ignore the HT
+	 * setting so you can fix a channel you're on already
+	 */
+	if (local->oper_channel == chan)
+		return 0;
+
+	if (sdata->vif.type == NL80211_IFTYPE_STATION)
+		ieee80211_sta_req_auth(sdata);
+
+	local->oper_channel = chan;
+	local->oper_channel_type = NL80211_CHAN_NO_HT;
+	ieee80211_hw_config(local, 0);
+
+	return 0;
 }
 
 
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 8b6bbb3032b..2936fa3b6dc 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -1914,8 +1914,8 @@ static int netlink_seq_show(struct seq_file *seq, void *v)
 			   s->sk_protocol,
 			   nlk->pid,
 			   nlk->groups ? (u32)nlk->groups[0] : 0,
-			   atomic_read(&s->sk_rmem_alloc),
-			   atomic_read(&s->sk_wmem_alloc),
+			   sk_rmem_alloc_get(s),
+			   sk_wmem_alloc_get(s),
 			   nlk->cb,
 			   atomic_read(&s->sk_refcnt),
 			   atomic_read(&s->sk_drops)
diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c
index 3be0e016ab7..ce51ce012cd 100644
--- a/net/netrom/af_netrom.c
+++ b/net/netrom/af_netrom.c
@@ -286,8 +286,7 @@ void nr_destroy_socket(struct sock *sk)
 		kfree_skb(skb);
 	}
 
-	if (atomic_read(&sk->sk_wmem_alloc) ||
-	    atomic_read(&sk->sk_rmem_alloc)) {
+	if (sk_has_allocations(sk)) {
 		/* Defer: outstanding buffers */
 		sk->sk_timer.function = nr_destroy_timer;
 		sk->sk_timer.expires  = jiffies + 2 * HZ;
@@ -1206,7 +1205,7 @@ static int nr_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 		long amount;
 
 		lock_sock(sk);
-		amount = sk->sk_sndbuf - atomic_read(&sk->sk_wmem_alloc);
+		amount = sk->sk_sndbuf - sk_wmem_alloc_get(sk);
 		if (amount < 0)
 			amount = 0;
 		release_sock(sk);
@@ -1342,8 +1341,8 @@ static int nr_info_show(struct seq_file *seq, void *v)
 			nr->n2count,
 			nr->n2,
 			nr->window,
-			atomic_read(&s->sk_wmem_alloc),
-			atomic_read(&s->sk_rmem_alloc),
+			sk_wmem_alloc_get(s),
+			sk_rmem_alloc_get(s),
 			s->sk_socket ? SOCK_INODE(s->sk_socket)->i_ino : 0L);
 
 		bh_unlock_sock(s);
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 4f76e5552d8..ebe5718baa3 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -1987,7 +1987,8 @@ static int packet_ioctl(struct socket *sock, unsigned int cmd,
 	switch (cmd) {
 		case SIOCOUTQ:
 		{
-			int amount = atomic_read(&sk->sk_wmem_alloc);
+			int amount = sk_wmem_alloc_get(sk);
+
 			return put_user(amount, (int __user *)arg);
 		}
 		case SIOCINQ:
diff --git a/net/rfkill/core.c b/net/rfkill/core.c
index 4e68ab439d5..79693fe2001 100644
--- a/net/rfkill/core.c
+++ b/net/rfkill/core.c
@@ -56,7 +56,6 @@ struct rfkill {
 	u32			idx;
 
 	bool			registered;
-	bool			suspended;
 	bool			persistent;
 
 	const struct rfkill_ops	*ops;
@@ -224,7 +223,7 @@ static void rfkill_send_events(struct rfkill *rfkill, enum rfkill_operation op)
 
 static void rfkill_event(struct rfkill *rfkill)
 {
-	if (!rfkill->registered || rfkill->suspended)
+	if (!rfkill->registered)
 		return;
 
 	kobject_uevent(&rfkill->dev.kobj, KOBJ_CHANGE);
@@ -270,6 +269,9 @@ static void rfkill_set_block(struct rfkill *rfkill, bool blocked)
 	unsigned long flags;
 	int err;
 
+	if (unlikely(rfkill->dev.power.power_state.event & PM_EVENT_SLEEP))
+		return;
+
 	/*
 	 * Some platforms (...!) generate input events which affect the
 	 * _hard_ kill state -- whenever something tries to change the
@@ -292,9 +294,6 @@ static void rfkill_set_block(struct rfkill *rfkill, bool blocked)
 	rfkill->state |= RFKILL_BLOCK_SW_SETCALL;
 	spin_unlock_irqrestore(&rfkill->lock, flags);
 
-	if (unlikely(rfkill->dev.power.power_state.event & PM_EVENT_SLEEP))
-		return;
-
 	err = rfkill->ops->set_block(rfkill->data, blocked);
 
 	spin_lock_irqsave(&rfkill->lock, flags);
@@ -508,19 +507,32 @@ bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked)
 	blocked = blocked || hwblock;
 	spin_unlock_irqrestore(&rfkill->lock, flags);
 
-	if (!rfkill->registered) {
-		rfkill->persistent = true;
-	} else {
-		if (prev != blocked && !hwblock)
-			schedule_work(&rfkill->uevent_work);
+	if (!rfkill->registered)
+		return blocked;
 
-		rfkill_led_trigger_event(rfkill);
-	}
+	if (prev != blocked && !hwblock)
+		schedule_work(&rfkill->uevent_work);
+
+	rfkill_led_trigger_event(rfkill);
 
 	return blocked;
 }
 EXPORT_SYMBOL(rfkill_set_sw_state);
 
+void rfkill_init_sw_state(struct rfkill *rfkill, bool blocked)
+{
+	unsigned long flags;
+
+	BUG_ON(!rfkill);
+	BUG_ON(rfkill->registered);
+
+	spin_lock_irqsave(&rfkill->lock, flags);
+	__rfkill_set_sw_state(rfkill, blocked);
+	rfkill->persistent = true;
+	spin_unlock_irqrestore(&rfkill->lock, flags);
+}
+EXPORT_SYMBOL(rfkill_init_sw_state);
+
 void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw)
 {
 	unsigned long flags;
@@ -598,6 +610,15 @@ static ssize_t rfkill_idx_show(struct device *dev,
 	return sprintf(buf, "%d\n", rfkill->idx);
 }
 
+static ssize_t rfkill_persistent_show(struct device *dev,
+			       struct device_attribute *attr,
+			       char *buf)
+{
+	struct rfkill *rfkill = to_rfkill(dev);
+
+	return sprintf(buf, "%d\n", rfkill->persistent);
+}
+
 static u8 user_state_from_blocked(unsigned long state)
 {
 	if (state & RFKILL_BLOCK_HW)
@@ -656,6 +677,7 @@ static struct device_attribute rfkill_dev_attrs[] = {
 	__ATTR(name, S_IRUGO, rfkill_name_show, NULL),
 	__ATTR(type, S_IRUGO, rfkill_type_show, NULL),
 	__ATTR(index, S_IRUGO, rfkill_idx_show, NULL),
+	__ATTR(persistent, S_IRUGO, rfkill_persistent_show, NULL),
 	__ATTR(state, S_IRUGO|S_IWUSR, rfkill_state_show, rfkill_state_store),
 	__ATTR(claim, S_IRUGO|S_IWUSR, rfkill_claim_show, rfkill_claim_store),
 	__ATTR_NULL
@@ -718,8 +740,6 @@ static int rfkill_suspend(struct device *dev, pm_message_t state)
 
 	rfkill_pause_polling(rfkill);
 
-	rfkill->suspended = true;
-
 	return 0;
 }
 
@@ -728,10 +748,10 @@ static int rfkill_resume(struct device *dev)
 	struct rfkill *rfkill = to_rfkill(dev);
 	bool cur;
 
-	cur = !!(rfkill->state & RFKILL_BLOCK_SW);
-	rfkill_set_block(rfkill, cur);
-
-	rfkill->suspended = false;
+	if (!rfkill->persistent) {
+		cur = !!(rfkill->state & RFKILL_BLOCK_SW);
+		rfkill_set_block(rfkill, cur);
+	}
 
 	rfkill_resume_polling(rfkill);
 
diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c
index 877a7f65f70..6bd8e93869e 100644
--- a/net/rose/af_rose.c
+++ b/net/rose/af_rose.c
@@ -356,8 +356,7 @@ void rose_destroy_socket(struct sock *sk)
 		kfree_skb(skb);
 	}
 
-	if (atomic_read(&sk->sk_wmem_alloc) ||
-	    atomic_read(&sk->sk_rmem_alloc)) {
+	if (sk_has_allocations(sk)) {
 		/* Defer: outstanding buffers */
 		setup_timer(&sk->sk_timer, rose_destroy_timer,
 				(unsigned long)sk);
@@ -1310,7 +1309,8 @@ static int rose_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 	switch (cmd) {
 	case TIOCOUTQ: {
 		long amount;
-		amount = sk->sk_sndbuf - atomic_read(&sk->sk_wmem_alloc);
+
+		amount = sk->sk_sndbuf - sk_wmem_alloc_get(sk);
 		if (amount < 0)
 			amount = 0;
 		return put_user(amount, (unsigned int __user *) argp);
@@ -1481,8 +1481,8 @@ static int rose_info_show(struct seq_file *seq, void *v)
 			rose->hb / HZ,
 			ax25_display_timer(&rose->idletimer) / (60 * HZ),
 			rose->idle / (60 * HZ),
-			atomic_read(&s->sk_wmem_alloc),
-			atomic_read(&s->sk_rmem_alloc),
+			sk_wmem_alloc_get(s),
+			sk_rmem_alloc_get(s),
 			s->sk_socket ? SOCK_INODE(s->sk_socket)->i_ino : 0L);
 	}
 
diff --git a/net/sched/act_police.c b/net/sched/act_police.c
index f8f047b6124..723964c3ee4 100644
--- a/net/sched/act_police.c
+++ b/net/sched/act_police.c
@@ -294,6 +294,8 @@ static int tcf_act_police(struct sk_buff *skb, struct tc_action *a,
 	if (police->tcfp_ewma_rate &&
 	    police->tcf_rate_est.bps >= police->tcfp_ewma_rate) {
 		police->tcf_qstats.overlimits++;
+		if (police->tcf_action == TC_ACT_SHOT)
+			police->tcf_qstats.drops++;
 		spin_unlock(&police->tcf_lock);
 		return police->tcf_action;
 	}
@@ -327,6 +329,8 @@ static int tcf_act_police(struct sk_buff *skb, struct tc_action *a,
 	}
 
 	police->tcf_qstats.overlimits++;
+	if (police->tcf_action == TC_ACT_SHOT)
+		police->tcf_qstats.drops++;
 	spin_unlock(&police->tcf_lock);
 	return police->tcf_action;
 }
diff --git a/net/sched/em_meta.c b/net/sched/em_meta.c
index 266151ae85a..18d85d25910 100644
--- a/net/sched/em_meta.c
+++ b/net/sched/em_meta.c
@@ -349,13 +349,13 @@ META_COLLECTOR(int_sk_type)
 META_COLLECTOR(int_sk_rmem_alloc)
 {
 	SKIP_NONLOCAL(skb);
-	dst->value = atomic_read(&skb->sk->sk_rmem_alloc);
+	dst->value = sk_rmem_alloc_get(skb->sk);
 }
 
 META_COLLECTOR(int_sk_wmem_alloc)
 {
 	SKIP_NONLOCAL(skb);
-	dst->value = atomic_read(&skb->sk->sk_wmem_alloc);
+	dst->value = sk_wmem_alloc_get(skb->sk);
 }
 
 META_COLLECTOR(int_sk_omem_alloc)
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 0f01e5d8a24..35ba035970a 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -130,7 +130,7 @@ static inline int sctp_wspace(struct sctp_association *asoc)
 	if (asoc->ep->sndbuf_policy)
 		amt = asoc->sndbuf_used;
 	else
-		amt = atomic_read(&asoc->base.sk->sk_wmem_alloc);
+		amt = sk_wmem_alloc_get(asoc->base.sk);
 
 	if (amt >= asoc->base.sk->sk_sndbuf) {
 		if (asoc->base.sk->sk_userlocks & SOCK_SNDBUF_LOCK)
@@ -6523,7 +6523,7 @@ static int sctp_writeable(struct sock *sk)
 {
 	int amt = 0;
 
-	amt = sk->sk_sndbuf - atomic_read(&sk->sk_wmem_alloc);
+	amt = sk->sk_sndbuf - sk_wmem_alloc_get(sk);
 	if (amt < 0)
 		amt = 0;
 	return amt;
diff --git a/net/sunrpc/Makefile b/net/sunrpc/Makefile
index 5369aa369b3..db73fd2a3f0 100644
--- a/net/sunrpc/Makefile
+++ b/net/sunrpc/Makefile
@@ -13,5 +13,6 @@ sunrpc-y := clnt.o xprt.o socklib.o xprtsock.o sched.o \
 	    rpcb_clnt.o timer.o xdr.o \
 	    sunrpc_syms.o cache.o rpc_pipe.o \
 	    svc_xprt.o
+sunrpc-$(CONFIG_NFS_V4_1) += backchannel_rqst.o bc_svc.o
 sunrpc-$(CONFIG_PROC_FS) += stats.o
 sunrpc-$(CONFIG_SYSCTL) += sysctl.o
diff --git a/net/sunrpc/backchannel_rqst.c b/net/sunrpc/backchannel_rqst.c
new file mode 100644
index 00000000000..553621fb2c4
--- /dev/null
+++ b/net/sunrpc/backchannel_rqst.c
@@ -0,0 +1,281 @@
+/******************************************************************************
+
+(c) 2007 Network Appliance, Inc.  All Rights Reserved.
+(c) 2009 NetApp.  All Rights Reserved.
+
+NetApp provides this source code under the GPL v2 License.
+The GPL v2 license is available at
+http://opensource.org/licenses/gpl-license.php.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+******************************************************************************/
+
+#include <linux/tcp.h>
+#include <linux/sunrpc/xprt.h>
+
+#ifdef RPC_DEBUG
+#define RPCDBG_FACILITY	RPCDBG_TRANS
+#endif
+
+#if defined(CONFIG_NFS_V4_1)
+
+/*
+ * Helper routines that track the number of preallocation elements
+ * on the transport.
+ */
+static inline int xprt_need_to_requeue(struct rpc_xprt *xprt)
+{
+	return xprt->bc_alloc_count > 0;
+}
+
+static inline void xprt_inc_alloc_count(struct rpc_xprt *xprt, unsigned int n)
+{
+	xprt->bc_alloc_count += n;
+}
+
+static inline int xprt_dec_alloc_count(struct rpc_xprt *xprt, unsigned int n)
+{
+	return xprt->bc_alloc_count -= n;
+}
+
+/*
+ * Free the preallocated rpc_rqst structure and the memory
+ * buffers hanging off of it.
+ */
+static void xprt_free_allocation(struct rpc_rqst *req)
+{
+	struct xdr_buf *xbufp;
+
+	dprintk("RPC:        free allocations for req= %p\n", req);
+	BUG_ON(test_bit(RPC_BC_PA_IN_USE, &req->rq_bc_pa_state));
+	xbufp = &req->rq_private_buf;
+	free_page((unsigned long)xbufp->head[0].iov_base);
+	xbufp = &req->rq_snd_buf;
+	free_page((unsigned long)xbufp->head[0].iov_base);
+	list_del(&req->rq_bc_pa_list);
+	kfree(req);
+}
+
+/*
+ * Preallocate up to min_reqs structures and related buffers for use
+ * by the backchannel.  This function can be called multiple times
+ * when creating new sessions that use the same rpc_xprt.  The
+ * preallocated buffers are added to the pool of resources used by
+ * the rpc_xprt.  Anyone of these resources may be used used by an
+ * incoming callback request.  It's up to the higher levels in the
+ * stack to enforce that the maximum number of session slots is not
+ * being exceeded.
+ *
+ * Some callback arguments can be large.  For example, a pNFS server
+ * using multiple deviceids.  The list can be unbound, but the client
+ * has the ability to tell the server the maximum size of the callback
+ * requests.  Each deviceID is 16 bytes, so allocate one page
+ * for the arguments to have enough room to receive a number of these
+ * deviceIDs.  The NFS client indicates to the pNFS server that its
+ * callback requests can be up to 4096 bytes in size.
+ */
+int xprt_setup_backchannel(struct rpc_xprt *xprt, unsigned int min_reqs)
+{
+	struct page *page_rcv = NULL, *page_snd = NULL;
+	struct xdr_buf *xbufp = NULL;
+	struct rpc_rqst *req, *tmp;
+	struct list_head tmp_list;
+	int i;
+
+	dprintk("RPC:       setup backchannel transport\n");
+
+	/*
+	 * We use a temporary list to keep track of the preallocated
+	 * buffers.  Once we're done building the list we splice it
+	 * into the backchannel preallocation list off of the rpc_xprt
+	 * struct.  This helps minimize the amount of time the list
+	 * lock is held on the rpc_xprt struct.  It also makes cleanup
+	 * easier in case of memory allocation errors.
+	 */
+	INIT_LIST_HEAD(&tmp_list);
+	for (i = 0; i < min_reqs; i++) {
+		/* Pre-allocate one backchannel rpc_rqst */
+		req = kzalloc(sizeof(struct rpc_rqst), GFP_KERNEL);
+		if (req == NULL) {
+			printk(KERN_ERR "Failed to create bc rpc_rqst\n");
+			goto out_free;
+		}
+
+		/* Add the allocated buffer to the tmp list */
+		dprintk("RPC:       adding req= %p\n", req);
+		list_add(&req->rq_bc_pa_list, &tmp_list);
+
+		req->rq_xprt = xprt;
+		INIT_LIST_HEAD(&req->rq_list);
+		INIT_LIST_HEAD(&req->rq_bc_list);
+
+		/* Preallocate one XDR receive buffer */
+		page_rcv = alloc_page(GFP_KERNEL);
+		if (page_rcv == NULL) {
+			printk(KERN_ERR "Failed to create bc receive xbuf\n");
+			goto out_free;
+		}
+		xbufp = &req->rq_rcv_buf;
+		xbufp->head[0].iov_base = page_address(page_rcv);
+		xbufp->head[0].iov_len = PAGE_SIZE;
+		xbufp->tail[0].iov_base = NULL;
+		xbufp->tail[0].iov_len = 0;
+		xbufp->page_len = 0;
+		xbufp->len = PAGE_SIZE;
+		xbufp->buflen = PAGE_SIZE;
+
+		/* Preallocate one XDR send buffer */
+		page_snd = alloc_page(GFP_KERNEL);
+		if (page_snd == NULL) {
+			printk(KERN_ERR "Failed to create bc snd xbuf\n");
+			goto out_free;
+		}
+
+		xbufp = &req->rq_snd_buf;
+		xbufp->head[0].iov_base = page_address(page_snd);
+		xbufp->head[0].iov_len = 0;
+		xbufp->tail[0].iov_base = NULL;
+		xbufp->tail[0].iov_len = 0;
+		xbufp->page_len = 0;
+		xbufp->len = 0;
+		xbufp->buflen = PAGE_SIZE;
+	}
+
+	/*
+	 * Add the temporary list to the backchannel preallocation list
+	 */
+	spin_lock_bh(&xprt->bc_pa_lock);
+	list_splice(&tmp_list, &xprt->bc_pa_list);
+	xprt_inc_alloc_count(xprt, min_reqs);
+	spin_unlock_bh(&xprt->bc_pa_lock);
+
+	dprintk("RPC:       setup backchannel transport done\n");
+	return 0;
+
+out_free:
+	/*
+	 * Memory allocation failed, free the temporary list
+	 */
+	list_for_each_entry_safe(req, tmp, &tmp_list, rq_bc_pa_list)
+		xprt_free_allocation(req);
+
+	dprintk("RPC:       setup backchannel transport failed\n");
+	return -1;
+}
+EXPORT_SYMBOL(xprt_setup_backchannel);
+
+/*
+ * Destroys the backchannel preallocated structures.
+ * Since these structures may have been allocated by multiple calls
+ * to xprt_setup_backchannel, we only destroy up to the maximum number
+ * of reqs specified by the caller.
+ * @xprt:	the transport holding the preallocated strucures
+ * @max_reqs	the maximum number of preallocated structures to destroy
+ */
+void xprt_destroy_backchannel(struct rpc_xprt *xprt, unsigned int max_reqs)
+{
+	struct rpc_rqst *req = NULL, *tmp = NULL;
+
+	dprintk("RPC:        destroy backchannel transport\n");
+
+	BUG_ON(max_reqs == 0);
+	spin_lock_bh(&xprt->bc_pa_lock);
+	xprt_dec_alloc_count(xprt, max_reqs);
+	list_for_each_entry_safe(req, tmp, &xprt->bc_pa_list, rq_bc_pa_list) {
+		dprintk("RPC:        req=%p\n", req);
+		xprt_free_allocation(req);
+		if (--max_reqs == 0)
+			break;
+	}
+	spin_unlock_bh(&xprt->bc_pa_lock);
+
+	dprintk("RPC:        backchannel list empty= %s\n",
+		list_empty(&xprt->bc_pa_list) ? "true" : "false");
+}
+EXPORT_SYMBOL(xprt_destroy_backchannel);
+
+/*
+ * One or more rpc_rqst structure have been preallocated during the
+ * backchannel setup.  Buffer space for the send and private XDR buffers
+ * has been preallocated as well.  Use xprt_alloc_bc_request to allocate
+ * to this request.  Use xprt_free_bc_request to return it.
+ *
+ * We know that we're called in soft interrupt context, grab the spin_lock
+ * since there is no need to grab the bottom half spin_lock.
+ *
+ * Return an available rpc_rqst, otherwise NULL if non are available.
+ */
+struct rpc_rqst *xprt_alloc_bc_request(struct rpc_xprt *xprt)
+{
+	struct rpc_rqst *req;
+
+	dprintk("RPC:       allocate a backchannel request\n");
+	spin_lock(&xprt->bc_pa_lock);
+	if (!list_empty(&xprt->bc_pa_list)) {
+		req = list_first_entry(&xprt->bc_pa_list, struct rpc_rqst,
+				rq_bc_pa_list);
+		list_del(&req->rq_bc_pa_list);
+	} else {
+		req = NULL;
+	}
+	spin_unlock(&xprt->bc_pa_lock);
+
+	if (req != NULL) {
+		set_bit(RPC_BC_PA_IN_USE, &req->rq_bc_pa_state);
+		req->rq_reply_bytes_recvd = 0;
+		req->rq_bytes_sent = 0;
+		memcpy(&req->rq_private_buf, &req->rq_rcv_buf,
+			sizeof(req->rq_private_buf));
+	}
+	dprintk("RPC:       backchannel req=%p\n", req);
+	return req;
+}
+
+/*
+ * Return the preallocated rpc_rqst structure and XDR buffers
+ * associated with this rpc_task.
+ */
+void xprt_free_bc_request(struct rpc_rqst *req)
+{
+	struct rpc_xprt *xprt = req->rq_xprt;
+
+	dprintk("RPC:       free backchannel req=%p\n", req);
+
+	smp_mb__before_clear_bit();
+	BUG_ON(!test_bit(RPC_BC_PA_IN_USE, &req->rq_bc_pa_state));
+	clear_bit(RPC_BC_PA_IN_USE, &req->rq_bc_pa_state);
+	smp_mb__after_clear_bit();
+
+	if (!xprt_need_to_requeue(xprt)) {
+		/*
+		 * The last remaining session was destroyed while this
+		 * entry was in use.  Free the entry and don't attempt
+		 * to add back to the list because there is no need to
+		 * have anymore preallocated entries.
+		 */
+		dprintk("RPC:       Last session removed req=%p\n", req);
+		xprt_free_allocation(req);
+		return;
+	}
+
+	/*
+	 * Return it to the list of preallocations so that it
+	 * may be reused by a new callback request.
+	 */
+	spin_lock_bh(&xprt->bc_pa_lock);
+	list_add(&req->rq_bc_pa_list, &xprt->bc_pa_list);
+	spin_unlock_bh(&xprt->bc_pa_lock);
+}
+
+#endif /* CONFIG_NFS_V4_1 */
diff --git a/net/sunrpc/bc_svc.c b/net/sunrpc/bc_svc.c
new file mode 100644
index 00000000000..13f214f5312
--- /dev/null
+++ b/net/sunrpc/bc_svc.c
@@ -0,0 +1,81 @@
+/******************************************************************************
+
+(c) 2007 Network Appliance, Inc.  All Rights Reserved.
+(c) 2009 NetApp.  All Rights Reserved.
+
+NetApp provides this source code under the GPL v2 License.
+The GPL v2 license is available at
+http://opensource.org/licenses/gpl-license.php.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+******************************************************************************/
+
+/*
+ * The NFSv4.1 callback service helper routines.
+ * They implement the transport level processing required to send the
+ * reply over an existing open connection previously established by the client.
+ */
+
+#if defined(CONFIG_NFS_V4_1)
+
+#include <linux/module.h>
+
+#include <linux/sunrpc/xprt.h>
+#include <linux/sunrpc/sched.h>
+#include <linux/sunrpc/bc_xprt.h>
+
+#define RPCDBG_FACILITY	RPCDBG_SVCDSP
+
+void bc_release_request(struct rpc_task *task)
+{
+	struct rpc_rqst *req = task->tk_rqstp;
+
+	dprintk("RPC:       bc_release_request: task= %p\n", task);
+
+	/*
+	 * Release this request only if it's a backchannel
+	 * preallocated request
+	 */
+	if (!bc_prealloc(req))
+		return;
+	xprt_free_bc_request(req);
+}
+
+/* Empty callback ops */
+static const struct rpc_call_ops nfs41_callback_ops = {
+};
+
+
+/*
+ * Send the callback reply
+ */
+int bc_send(struct rpc_rqst *req)
+{
+	struct rpc_task *task;
+	int ret;
+
+	dprintk("RPC:       bc_send req= %p\n", req);
+	task = rpc_run_bc_task(req, &nfs41_callback_ops);
+	if (IS_ERR(task))
+		ret = PTR_ERR(task);
+	else {
+		BUG_ON(atomic_read(&task->tk_count) != 1);
+		ret = task->tk_status;
+		rpc_put_task(task);
+	}
+	return ret;
+	dprintk("RPC:       bc_send ret= %d \n", ret);
+}
+
+#endif /* CONFIG_NFS_V4_1 */
diff --git a/net/sunrpc/cache.c b/net/sunrpc/cache.c
index 20029a79a5d..ff0c23053d2 100644
--- a/net/sunrpc/cache.c
+++ b/net/sunrpc/cache.c
@@ -488,7 +488,7 @@ static void do_cache_clean(struct work_struct *work)
 {
 	int delay = 5;
 	if (cache_clean() == -1)
-		delay = 30*HZ;
+		delay = round_jiffies_relative(30*HZ);
 
 	if (list_empty(&cache_list))
 		delay = 0;
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index 5abab094441..5bc2f45bddf 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -36,7 +36,9 @@
 #include <linux/sunrpc/clnt.h>
 #include <linux/sunrpc/rpc_pipe_fs.h>
 #include <linux/sunrpc/metrics.h>
+#include <linux/sunrpc/bc_xprt.h>
 
+#include "sunrpc.h"
 
 #ifdef RPC_DEBUG
 # define RPCDBG_FACILITY	RPCDBG_CALL
@@ -63,6 +65,9 @@ static void	call_decode(struct rpc_task *task);
 static void	call_bind(struct rpc_task *task);
 static void	call_bind_status(struct rpc_task *task);
 static void	call_transmit(struct rpc_task *task);
+#if defined(CONFIG_NFS_V4_1)
+static void	call_bc_transmit(struct rpc_task *task);
+#endif /* CONFIG_NFS_V4_1 */
 static void	call_status(struct rpc_task *task);
 static void	call_transmit_status(struct rpc_task *task);
 static void	call_refresh(struct rpc_task *task);
@@ -613,6 +618,50 @@ rpc_call_async(struct rpc_clnt *clnt, const struct rpc_message *msg, int flags,
 }
 EXPORT_SYMBOL_GPL(rpc_call_async);
 
+#if defined(CONFIG_NFS_V4_1)
+/**
+ * rpc_run_bc_task - Allocate a new RPC task for backchannel use, then run
+ * rpc_execute against it
+ * @ops: RPC call ops
+ */
+struct rpc_task *rpc_run_bc_task(struct rpc_rqst *req,
+					const struct rpc_call_ops *tk_ops)
+{
+	struct rpc_task *task;
+	struct xdr_buf *xbufp = &req->rq_snd_buf;
+	struct rpc_task_setup task_setup_data = {
+		.callback_ops = tk_ops,
+	};
+
+	dprintk("RPC: rpc_run_bc_task req= %p\n", req);
+	/*
+	 * Create an rpc_task to send the data
+	 */
+	task = rpc_new_task(&task_setup_data);
+	if (!task) {
+		xprt_free_bc_request(req);
+		goto out;
+	}
+	task->tk_rqstp = req;
+
+	/*
+	 * Set up the xdr_buf length.
+	 * This also indicates that the buffer is XDR encoded already.
+	 */
+	xbufp->len = xbufp->head[0].iov_len + xbufp->page_len +
+			xbufp->tail[0].iov_len;
+
+	task->tk_action = call_bc_transmit;
+	atomic_inc(&task->tk_count);
+	BUG_ON(atomic_read(&task->tk_count) != 2);
+	rpc_execute(task);
+
+out:
+	dprintk("RPC: rpc_run_bc_task: task= %p\n", task);
+	return task;
+}
+#endif /* CONFIG_NFS_V4_1 */
+
 void
 rpc_call_start(struct rpc_task *task)
 {
@@ -695,6 +744,19 @@ void rpc_force_rebind(struct rpc_clnt *clnt)
 EXPORT_SYMBOL_GPL(rpc_force_rebind);
 
 /*
+ * Restart an (async) RPC call from the call_prepare state.
+ * Usually called from within the exit handler.
+ */
+void
+rpc_restart_call_prepare(struct rpc_task *task)
+{
+	if (RPC_ASSASSINATED(task))
+		return;
+	task->tk_action = rpc_prepare_task;
+}
+EXPORT_SYMBOL_GPL(rpc_restart_call_prepare);
+
+/*
  * Restart an (async) RPC call. Usually called from within the
  * exit handler.
  */
@@ -1085,7 +1147,7 @@ call_transmit(struct rpc_task *task)
 	 * in order to allow access to the socket to other RPC requests.
 	 */
 	call_transmit_status(task);
-	if (task->tk_msg.rpc_proc->p_decode != NULL)
+	if (rpc_reply_expected(task))
 		return;
 	task->tk_action = rpc_exit_task;
 	rpc_wake_up_queued_task(&task->tk_xprt->pending, task);
@@ -1120,6 +1182,72 @@ call_transmit_status(struct rpc_task *task)
 	}
 }
 
+#if defined(CONFIG_NFS_V4_1)
+/*
+ * 5b.	Send the backchannel RPC reply.  On error, drop the reply.  In
+ * addition, disconnect on connectivity errors.
+ */
+static void
+call_bc_transmit(struct rpc_task *task)
+{
+	struct rpc_rqst *req = task->tk_rqstp;
+
+	BUG_ON(task->tk_status != 0);
+	task->tk_status = xprt_prepare_transmit(task);
+	if (task->tk_status == -EAGAIN) {
+		/*
+		 * Could not reserve the transport. Try again after the
+		 * transport is released.
+		 */
+		task->tk_status = 0;
+		task->tk_action = call_bc_transmit;
+		return;
+	}
+
+	task->tk_action = rpc_exit_task;
+	if (task->tk_status < 0) {
+		printk(KERN_NOTICE "RPC: Could not send backchannel reply "
+			"error: %d\n", task->tk_status);
+		return;
+	}
+
+	xprt_transmit(task);
+	xprt_end_transmit(task);
+	dprint_status(task);
+	switch (task->tk_status) {
+	case 0:
+		/* Success */
+		break;
+	case -EHOSTDOWN:
+	case -EHOSTUNREACH:
+	case -ENETUNREACH:
+	case -ETIMEDOUT:
+		/*
+		 * Problem reaching the server.  Disconnect and let the
+		 * forechannel reestablish the connection.  The server will
+		 * have to retransmit the backchannel request and we'll
+		 * reprocess it.  Since these ops are idempotent, there's no
+		 * need to cache our reply at this time.
+		 */
+		printk(KERN_NOTICE "RPC: Could not send backchannel reply "
+			"error: %d\n", task->tk_status);
+		xprt_conditional_disconnect(task->tk_xprt,
+			req->rq_connect_cookie);
+		break;
+	default:
+		/*
+		 * We were unable to reply and will have to drop the
+		 * request.  The server should reconnect and retransmit.
+		 */
+		BUG_ON(task->tk_status == -EAGAIN);
+		printk(KERN_NOTICE "RPC: Could not send backchannel reply "
+			"error: %d\n", task->tk_status);
+		break;
+	}
+	rpc_wake_up_queued_task(&req->rq_xprt->pending, task);
+}
+#endif /* CONFIG_NFS_V4_1 */
+
 /*
  * 6.	Sort out the RPC call status
  */
@@ -1130,8 +1258,8 @@ call_status(struct rpc_task *task)
 	struct rpc_rqst	*req = task->tk_rqstp;
 	int		status;
 
-	if (req->rq_received > 0 && !req->rq_bytes_sent)
-		task->tk_status = req->rq_received;
+	if (req->rq_reply_bytes_recvd > 0 && !req->rq_bytes_sent)
+		task->tk_status = req->rq_reply_bytes_recvd;
 
 	dprint_status(task);
 
@@ -1248,7 +1376,7 @@ call_decode(struct rpc_task *task)
 
 	/*
 	 * Ensure that we see all writes made by xprt_complete_rqst()
-	 * before it changed req->rq_received.
+	 * before it changed req->rq_reply_bytes_recvd.
 	 */
 	smp_rmb();
 	req->rq_rcv_buf.len = req->rq_private_buf.len;
@@ -1289,7 +1417,7 @@ out_retry:
 	task->tk_status = 0;
 	/* Note: rpc_verify_header() may have freed the RPC slot */
 	if (task->tk_rqstp == req) {
-		req->rq_received = req->rq_rcv_buf.len = 0;
+		req->rq_reply_bytes_recvd = req->rq_rcv_buf.len = 0;
 		if (task->tk_client->cl_discrtry)
 			xprt_conditional_disconnect(task->tk_xprt,
 					req->rq_connect_cookie);
@@ -1377,13 +1505,14 @@ rpc_verify_header(struct rpc_task *task)
 	}
 	if ((len -= 3) < 0)
 		goto out_overflow;
-	p += 1;	/* skip XID */
 
+	p += 1; /* skip XID */
 	if ((n = ntohl(*p++)) != RPC_REPLY) {
 		dprintk("RPC: %5u %s: not an RPC reply: %x\n",
-				task->tk_pid, __func__, n);
+			task->tk_pid, __func__, n);
 		goto out_garbage;
 	}
+
 	if ((n = ntohl(*p++)) != RPC_MSG_ACCEPTED) {
 		if (--len < 0)
 			goto out_overflow;
diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c
index ff50a054686..1102ce1251f 100644
--- a/net/sunrpc/sched.c
+++ b/net/sunrpc/sched.c
@@ -569,7 +569,7 @@ EXPORT_SYMBOL_GPL(rpc_delay);
 /*
  * Helper to call task->tk_ops->rpc_call_prepare
  */
-static void rpc_prepare_task(struct rpc_task *task)
+void rpc_prepare_task(struct rpc_task *task)
 {
 	task->tk_ops->rpc_call_prepare(task, task->tk_calldata);
 }
diff --git a/net/sunrpc/stats.c b/net/sunrpc/stats.c
index 1ef6e46d9da..1b4e6791ecf 100644
--- a/net/sunrpc/stats.c
+++ b/net/sunrpc/stats.c
@@ -141,12 +141,14 @@ EXPORT_SYMBOL_GPL(rpc_free_iostats);
 void rpc_count_iostats(struct rpc_task *task)
 {
 	struct rpc_rqst *req = task->tk_rqstp;
-	struct rpc_iostats *stats = task->tk_client->cl_metrics;
+	struct rpc_iostats *stats;
 	struct rpc_iostats *op_metrics;
 	long rtt, execute, queue;
 
-	if (!stats || !req)
+	if (!task->tk_client || !task->tk_client->cl_metrics || !req)
 		return;
+
+	stats = task->tk_client->cl_metrics;
 	op_metrics = &stats[task->tk_msg.rpc_proc->p_statidx];
 
 	op_metrics->om_ops++;
@@ -154,7 +156,7 @@ void rpc_count_iostats(struct rpc_task *task)
 	op_metrics->om_timeouts += task->tk_timeouts;
 
 	op_metrics->om_bytes_sent += task->tk_bytes_sent;
-	op_metrics->om_bytes_recv += req->rq_received;
+	op_metrics->om_bytes_recv += req->rq_reply_bytes_recvd;
 
 	queue = (long)req->rq_xtime - task->tk_start;
 	if (queue < 0)
diff --git a/net/sunrpc/sunrpc.h b/net/sunrpc/sunrpc.h
new file mode 100644
index 00000000000..5d9dd742264
--- /dev/null
+++ b/net/sunrpc/sunrpc.h
@@ -0,0 +1,37 @@
+/******************************************************************************
+
+(c) 2008 NetApp.  All Rights Reserved.
+
+NetApp provides this source code under the GPL v2 License.
+The GPL v2 license is available at
+http://opensource.org/licenses/gpl-license.php.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+******************************************************************************/
+
+/*
+ * Functions and macros used internally by RPC
+ */
+
+#ifndef _NET_SUNRPC_SUNRPC_H
+#define _NET_SUNRPC_SUNRPC_H
+
+static inline int rpc_reply_expected(struct rpc_task *task)
+{
+	return (task->tk_msg.rpc_proc != NULL) &&
+		(task->tk_msg.rpc_proc->p_decode != NULL);
+}
+
+#endif /* _NET_SUNRPC_SUNRPC_H */
+
diff --git a/net/sunrpc/svc.c b/net/sunrpc/svc.c
index 5ed8931dfe9..952f206ff30 100644
--- a/net/sunrpc/svc.c
+++ b/net/sunrpc/svc.c
@@ -25,6 +25,7 @@
 #include <linux/sunrpc/stats.h>
 #include <linux/sunrpc/svcsock.h>
 #include <linux/sunrpc/clnt.h>
+#include <linux/sunrpc/bc_xprt.h>
 
 #define RPCDBG_FACILITY	RPCDBG_SVCDSP
 
@@ -486,6 +487,10 @@ svc_destroy(struct svc_serv *serv)
 	if (svc_serv_is_pooled(serv))
 		svc_pool_map_put();
 
+#if defined(CONFIG_NFS_V4_1)
+	svc_sock_destroy(serv->bc_xprt);
+#endif /* CONFIG_NFS_V4_1 */
+
 	svc_unregister(serv);
 	kfree(serv->sv_pools);
 	kfree(serv);
@@ -970,20 +975,18 @@ svc_printk(struct svc_rqst *rqstp, const char *fmt, ...)
 }
 
 /*
- * Process the RPC request.
+ * Common routine for processing the RPC request.
  */
-int
-svc_process(struct svc_rqst *rqstp)
+static int
+svc_process_common(struct svc_rqst *rqstp, struct kvec *argv, struct kvec *resv)
 {
 	struct svc_program	*progp;
 	struct svc_version	*versp = NULL;	/* compiler food */
 	struct svc_procedure	*procp = NULL;
-	struct kvec *		argv = &rqstp->rq_arg.head[0];
-	struct kvec *		resv = &rqstp->rq_res.head[0];
 	struct svc_serv		*serv = rqstp->rq_server;
 	kxdrproc_t		xdr;
 	__be32			*statp;
-	u32			dir, prog, vers, proc;
+	u32			prog, vers, proc;
 	__be32			auth_stat, rpc_stat;
 	int			auth_res;
 	__be32			*reply_statp;
@@ -993,19 +996,6 @@ svc_process(struct svc_rqst *rqstp)
 	if (argv->iov_len < 6*4)
 		goto err_short_len;
 
-	/* setup response xdr_buf.
-	 * Initially it has just one page
-	 */
-	rqstp->rq_resused = 1;
-	resv->iov_base = page_address(rqstp->rq_respages[0]);
-	resv->iov_len = 0;
-	rqstp->rq_res.pages = rqstp->rq_respages + 1;
-	rqstp->rq_res.len = 0;
-	rqstp->rq_res.page_base = 0;
-	rqstp->rq_res.page_len = 0;
-	rqstp->rq_res.buflen = PAGE_SIZE;
-	rqstp->rq_res.tail[0].iov_base = NULL;
-	rqstp->rq_res.tail[0].iov_len = 0;
 	/* Will be turned off only in gss privacy case: */
 	rqstp->rq_splice_ok = 1;
 	/* Will be turned off only when NFSv4 Sessions are used */
@@ -1014,17 +1004,13 @@ svc_process(struct svc_rqst *rqstp)
 	/* Setup reply header */
 	rqstp->rq_xprt->xpt_ops->xpo_prep_reply_hdr(rqstp);
 
-	rqstp->rq_xid = svc_getu32(argv);
 	svc_putu32(resv, rqstp->rq_xid);
 
-	dir  = svc_getnl(argv);
 	vers = svc_getnl(argv);
 
 	/* First words of reply: */
 	svc_putnl(resv, 1);		/* REPLY */
 
-	if (dir != 0)		/* direction != CALL */
-		goto err_bad_dir;
 	if (vers != 2)		/* RPC version number */
 		goto err_bad_rpc;
 
@@ -1147,7 +1133,7 @@ svc_process(struct svc_rqst *rqstp)
  sendit:
 	if (svc_authorise(rqstp))
 		goto dropit;
-	return svc_send(rqstp);
+	return 1;		/* Caller can now send it */
 
  dropit:
 	svc_authorise(rqstp);	/* doesn't hurt to call this twice */
@@ -1161,12 +1147,6 @@ err_short_len:
 
 	goto dropit;			/* drop request */
 
-err_bad_dir:
-	svc_printk(rqstp, "bad direction %d, dropping request\n", dir);
-
-	serv->sv_stats->rpcbadfmt++;
-	goto dropit;			/* drop request */
-
 err_bad_rpc:
 	serv->sv_stats->rpcbadfmt++;
 	svc_putnl(resv, 1);	/* REJECT */
@@ -1220,6 +1200,100 @@ err_bad:
 EXPORT_SYMBOL_GPL(svc_process);
 
 /*
+ * Process the RPC request.
+ */
+int
+svc_process(struct svc_rqst *rqstp)
+{
+	struct kvec		*argv = &rqstp->rq_arg.head[0];
+	struct kvec		*resv = &rqstp->rq_res.head[0];
+	struct svc_serv		*serv = rqstp->rq_server;
+	u32			dir;
+	int			error;
+
+	/*
+	 * Setup response xdr_buf.
+	 * Initially it has just one page
+	 */
+	rqstp->rq_resused = 1;
+	resv->iov_base = page_address(rqstp->rq_respages[0]);
+	resv->iov_len = 0;
+	rqstp->rq_res.pages = rqstp->rq_respages + 1;
+	rqstp->rq_res.len = 0;
+	rqstp->rq_res.page_base = 0;
+	rqstp->rq_res.page_len = 0;
+	rqstp->rq_res.buflen = PAGE_SIZE;
+	rqstp->rq_res.tail[0].iov_base = NULL;
+	rqstp->rq_res.tail[0].iov_len = 0;
+
+	rqstp->rq_xid = svc_getu32(argv);
+
+	dir  = svc_getnl(argv);
+	if (dir != 0) {
+		/* direction != CALL */
+		svc_printk(rqstp, "bad direction %d, dropping request\n", dir);
+		serv->sv_stats->rpcbadfmt++;
+		svc_drop(rqstp);
+		return 0;
+	}
+
+	error = svc_process_common(rqstp, argv, resv);
+	if (error <= 0)
+		return error;
+
+	return svc_send(rqstp);
+}
+
+#if defined(CONFIG_NFS_V4_1)
+/*
+ * Process a backchannel RPC request that arrived over an existing
+ * outbound connection
+ */
+int
+bc_svc_process(struct svc_serv *serv, struct rpc_rqst *req,
+	       struct svc_rqst *rqstp)
+{
+	struct kvec	*argv = &rqstp->rq_arg.head[0];
+	struct kvec	*resv = &rqstp->rq_res.head[0];
+	int 		error;
+
+	/* Build the svc_rqst used by the common processing routine */
+	rqstp->rq_xprt = serv->bc_xprt;
+	rqstp->rq_xid = req->rq_xid;
+	rqstp->rq_prot = req->rq_xprt->prot;
+	rqstp->rq_server = serv;
+
+	rqstp->rq_addrlen = sizeof(req->rq_xprt->addr);
+	memcpy(&rqstp->rq_addr, &req->rq_xprt->addr, rqstp->rq_addrlen);
+	memcpy(&rqstp->rq_arg, &req->rq_rcv_buf, sizeof(rqstp->rq_arg));
+	memcpy(&rqstp->rq_res, &req->rq_snd_buf, sizeof(rqstp->rq_res));
+
+	/* reset result send buffer "put" position */
+	resv->iov_len = 0;
+
+	if (rqstp->rq_prot != IPPROTO_TCP) {
+		printk(KERN_ERR "No support for Non-TCP transports!\n");
+		BUG();
+	}
+
+	/*
+	 * Skip the next two words because they've already been
+	 * processed in the trasport
+	 */
+	svc_getu32(argv);	/* XID */
+	svc_getnl(argv);	/* CALLDIR */
+
+	error = svc_process_common(rqstp, argv, resv);
+	if (error <= 0)
+		return error;
+
+	memcpy(&req->rq_snd_buf, &rqstp->rq_res, sizeof(req->rq_snd_buf));
+	return bc_send(req);
+}
+EXPORT_SYMBOL(bc_svc_process);
+#endif /* CONFIG_NFS_V4_1 */
+
+/*
  * Return (transport-specific) limit on the rpc payload.
  */
 u32 svc_max_payload(const struct svc_rqst *rqstp)
diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c
index c200d92e57e..6f33d33cc06 100644
--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -11,6 +11,7 @@
 #include <net/sock.h>
 #include <linux/sunrpc/stats.h>
 #include <linux/sunrpc/svc_xprt.h>
+#include <linux/sunrpc/svcsock.h>
 
 #define RPCDBG_FACILITY	RPCDBG_SVCXPRT
 
@@ -1097,36 +1098,58 @@ struct svc_xprt *svc_find_xprt(struct svc_serv *serv, const char *xcl_name,
 }
 EXPORT_SYMBOL_GPL(svc_find_xprt);
 
-/*
- * Format a buffer with a list of the active transports. A zero for
- * the buflen parameter disables target buffer overflow checking.
+static int svc_one_xprt_name(const struct svc_xprt *xprt,
+			     char *pos, int remaining)
+{
+	int len;
+
+	len = snprintf(pos, remaining, "%s %u\n",
+			xprt->xpt_class->xcl_name,
+			svc_xprt_local_port(xprt));
+	if (len >= remaining)
+		return -ENAMETOOLONG;
+	return len;
+}
+
+/**
+ * svc_xprt_names - format a buffer with a list of transport names
+ * @serv: pointer to an RPC service
+ * @buf: pointer to a buffer to be filled in
+ * @buflen: length of buffer to be filled in
+ *
+ * Fills in @buf with a string containing a list of transport names,
+ * each name terminated with '\n'.
+ *
+ * Returns positive length of the filled-in string on success; otherwise
+ * a negative errno value is returned if an error occurs.
  */
-int svc_xprt_names(struct svc_serv *serv, char *buf, int buflen)
+int svc_xprt_names(struct svc_serv *serv, char *buf, const int buflen)
 {
 	struct svc_xprt *xprt;
-	char xprt_str[64];
-	int totlen = 0;
-	int len;
+	int len, totlen;
+	char *pos;
 
 	/* Sanity check args */
 	if (!serv)
 		return 0;
 
 	spin_lock_bh(&serv->sv_lock);
+
+	pos = buf;
+	totlen = 0;
 	list_for_each_entry(xprt, &serv->sv_permsocks, xpt_list) {
-		len = snprintf(xprt_str, sizeof(xprt_str),
-			       "%s %d\n", xprt->xpt_class->xcl_name,
-			       svc_xprt_local_port(xprt));
-		/* If the string was truncated, replace with error string */
-		if (len >= sizeof(xprt_str))
-			strcpy(xprt_str, "name-too-long\n");
-		/* Don't overflow buffer */
-		len = strlen(xprt_str);
-		if (buflen && (len + totlen >= buflen))
+		len = svc_one_xprt_name(xprt, pos, buflen - totlen);
+		if (len < 0) {
+			*buf = '\0';
+			totlen = len;
+		}
+		if (len <= 0)
 			break;
-		strcpy(buf+totlen, xprt_str);
+
+		pos += len;
 		totlen += len;
 	}
+
 	spin_unlock_bh(&serv->sv_lock);
 	return totlen;
 }
diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c
index 9d504234af4..23128ee191a 100644
--- a/net/sunrpc/svcsock.c
+++ b/net/sunrpc/svcsock.c
@@ -240,42 +240,76 @@ out:
 /*
  * Report socket names for nfsdfs
  */
-static int one_sock_name(char *buf, struct svc_sock *svsk)
+static int svc_one_sock_name(struct svc_sock *svsk, char *buf, int remaining)
 {
+	const struct sock *sk = svsk->sk_sk;
+	const char *proto_name = sk->sk_protocol == IPPROTO_UDP ?
+							"udp" : "tcp";
 	int len;
 
-	switch(svsk->sk_sk->sk_family) {
-	case AF_INET:
-		len = sprintf(buf, "ipv4 %s %pI4 %d\n",
-			      svsk->sk_sk->sk_protocol == IPPROTO_UDP ?
-			      "udp" : "tcp",
-			      &inet_sk(svsk->sk_sk)->rcv_saddr,
-			      inet_sk(svsk->sk_sk)->num);
+	switch (sk->sk_family) {
+	case PF_INET:
+		len = snprintf(buf, remaining, "ipv4 %s %pI4 %d\n",
+				proto_name,
+				&inet_sk(sk)->rcv_saddr,
+				inet_sk(sk)->num);
+		break;
+	case PF_INET6:
+		len = snprintf(buf, remaining, "ipv6 %s %pI6 %d\n",
+				proto_name,
+				&inet6_sk(sk)->rcv_saddr,
+				inet_sk(sk)->num);
 		break;
 	default:
-		len = sprintf(buf, "*unknown-%d*\n",
-			       svsk->sk_sk->sk_family);
+		len = snprintf(buf, remaining, "*unknown-%d*\n",
+				sk->sk_family);
+	}
+
+	if (len >= remaining) {
+		*buf = '\0';
+		return -ENAMETOOLONG;
 	}
 	return len;
 }
 
-int
-svc_sock_names(char *buf, struct svc_serv *serv, char *toclose)
+/**
+ * svc_sock_names - construct a list of listener names in a string
+ * @serv: pointer to RPC service
+ * @buf: pointer to a buffer to fill in with socket names
+ * @buflen: size of the buffer to be filled
+ * @toclose: pointer to '\0'-terminated C string containing the name
+ *		of a listener to be closed
+ *
+ * Fills in @buf with a '\n'-separated list of names of listener
+ * sockets.  If @toclose is not NULL, the socket named by @toclose
+ * is closed, and is not included in the output list.
+ *
+ * Returns positive length of the socket name string, or a negative
+ * errno value on error.
+ */
+int svc_sock_names(struct svc_serv *serv, char *buf, const size_t buflen,
+		   const char *toclose)
 {
 	struct svc_sock *svsk, *closesk = NULL;
 	int len = 0;
 
 	if (!serv)
 		return 0;
+
 	spin_lock_bh(&serv->sv_lock);
 	list_for_each_entry(svsk, &serv->sv_permsocks, sk_xprt.xpt_list) {
-		int onelen = one_sock_name(buf+len, svsk);
-		if (toclose && strcmp(toclose, buf+len) == 0)
+		int onelen = svc_one_sock_name(svsk, buf + len, buflen - len);
+		if (onelen < 0) {
+			len = onelen;
+			break;
+		}
+		if (toclose && strcmp(toclose, buf + len) == 0)
 			closesk = svsk;
 		else
 			len += onelen;
 	}
 	spin_unlock_bh(&serv->sv_lock);
+
 	if (closesk)
 		/* Should unregister with portmap, but you cannot
 		 * unregister just one protocol...
@@ -346,6 +380,7 @@ static void svc_sock_setbufsize(struct socket *sock, unsigned int snd,
 	sock->sk->sk_sndbuf = snd * 2;
 	sock->sk->sk_rcvbuf = rcv * 2;
 	sock->sk->sk_userlocks |= SOCK_SNDBUF_LOCK|SOCK_RCVBUF_LOCK;
+	sock->sk->sk_write_space(sock->sk);
 	release_sock(sock->sk);
 #endif
 }
@@ -387,6 +422,15 @@ static void svc_write_space(struct sock *sk)
 	}
 }
 
+static void svc_tcp_write_space(struct sock *sk)
+{
+	struct socket *sock = sk->sk_socket;
+
+	if (sk_stream_wspace(sk) >= sk_stream_min_wspace(sk) && sock)
+		clear_bit(SOCK_NOSPACE, &sock->flags);
+	svc_write_space(sk);
+}
+
 /*
  * Copy the UDP datagram's destination address to the rqstp structure.
  * The 'destination' address in this case is the address to which the
@@ -427,13 +471,14 @@ static int svc_udp_recvfrom(struct svc_rqst *rqstp)
 		long		all[SVC_PKTINFO_SPACE / sizeof(long)];
 	} buffer;
 	struct cmsghdr *cmh = &buffer.hdr;
-	int		err, len;
 	struct msghdr msg = {
 		.msg_name = svc_addr(rqstp),
 		.msg_control = cmh,
 		.msg_controllen = sizeof(buffer),
 		.msg_flags = MSG_DONTWAIT,
 	};
+	size_t len;
+	int err;
 
 	if (test_and_clear_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags))
 	    /* udp sockets need large rcvbuf as all pending
@@ -465,8 +510,8 @@ static int svc_udp_recvfrom(struct svc_rqst *rqstp)
 		return -EAGAIN;
 	}
 	len = svc_addr_len(svc_addr(rqstp));
-	if (len < 0)
-		return len;
+	if (len == 0)
+		return -EAFNOSUPPORT;
 	rqstp->rq_addrlen = len;
 	if (skb->tstamp.tv64 == 0) {
 		skb->tstamp = ktime_get_real();
@@ -980,25 +1025,16 @@ static void svc_tcp_prep_reply_hdr(struct svc_rqst *rqstp)
 static int svc_tcp_has_wspace(struct svc_xprt *xprt)
 {
 	struct svc_sock *svsk =	container_of(xprt, struct svc_sock, sk_xprt);
-	struct svc_serv	*serv = svsk->sk_xprt.xpt_server;
+	struct svc_serv *serv = svsk->sk_xprt.xpt_server;
 	int required;
-	int wspace;
 
-	/*
-	 * Set the SOCK_NOSPACE flag before checking the available
-	 * sock space.
-	 */
+	if (test_bit(XPT_LISTENER, &xprt->xpt_flags))
+		return 1;
+	required = atomic_read(&xprt->xpt_reserved) + serv->sv_max_mesg;
+	if (sk_stream_wspace(svsk->sk_sk) >= required)
+		return 1;
 	set_bit(SOCK_NOSPACE, &svsk->sk_sock->flags);
-	required = atomic_read(&svsk->sk_xprt.xpt_reserved) + serv->sv_max_mesg;
-	wspace = sk_stream_wspace(svsk->sk_sk);
-
-	if (wspace < sk_stream_min_wspace(svsk->sk_sk))
-		return 0;
-	if (required * 2 > wspace)
-		return 0;
-
-	clear_bit(SOCK_NOSPACE, &svsk->sk_sock->flags);
-	return 1;
+	return 0;
 }
 
 static struct svc_xprt *svc_tcp_create(struct svc_serv *serv,
@@ -1054,7 +1090,7 @@ static void svc_tcp_init(struct svc_sock *svsk, struct svc_serv *serv)
 		dprintk("setting up TCP socket for reading\n");
 		sk->sk_state_change = svc_tcp_state_change;
 		sk->sk_data_ready = svc_tcp_data_ready;
-		sk->sk_write_space = svc_write_space;
+		sk->sk_write_space = svc_tcp_write_space;
 
 		svsk->sk_reclen = 0;
 		svsk->sk_tcplen = 0;
@@ -1148,9 +1184,19 @@ static struct svc_sock *svc_setup_socket(struct svc_serv *serv,
 	return svsk;
 }
 
-int svc_addsock(struct svc_serv *serv,
-		int fd,
-		char *name_return)
+/**
+ * svc_addsock - add a listener socket to an RPC service
+ * @serv: pointer to RPC service to which to add a new listener
+ * @fd: file descriptor of the new listener
+ * @name_return: pointer to buffer to fill in with name of listener
+ * @len: size of the buffer
+ *
+ * Fills in socket name and returns positive length of name if successful.
+ * Name is terminated with '\n'.  On error, returns a negative errno
+ * value.
+ */
+int svc_addsock(struct svc_serv *serv, const int fd, char *name_return,
+		const size_t len)
 {
 	int err = 0;
 	struct socket *so = sockfd_lookup(fd, &err);
@@ -1190,7 +1236,7 @@ int svc_addsock(struct svc_serv *serv,
 		sockfd_put(so);
 		return err;
 	}
-	return one_sock_name(name_return, svsk);
+	return svc_one_sock_name(svsk, name_return, len);
 }
 EXPORT_SYMBOL_GPL(svc_addsock);
 
@@ -1327,3 +1373,42 @@ static void svc_sock_free(struct svc_xprt *xprt)
 		sock_release(svsk->sk_sock);
 	kfree(svsk);
 }
+
+/*
+ * Create a svc_xprt.
+ *
+ * For internal use only (e.g. nfsv4.1 backchannel).
+ * Callers should typically use the xpo_create() method.
+ */
+struct svc_xprt *svc_sock_create(struct svc_serv *serv, int prot)
+{
+	struct svc_sock *svsk;
+	struct svc_xprt *xprt = NULL;
+
+	dprintk("svc: %s\n", __func__);
+	svsk = kzalloc(sizeof(*svsk), GFP_KERNEL);
+	if (!svsk)
+		goto out;
+
+	xprt = &svsk->sk_xprt;
+	if (prot == IPPROTO_TCP)
+		svc_xprt_init(&svc_tcp_class, xprt, serv);
+	else if (prot == IPPROTO_UDP)
+		svc_xprt_init(&svc_udp_class, xprt, serv);
+	else
+		BUG();
+out:
+	dprintk("svc: %s return %p\n", __func__, xprt);
+	return xprt;
+}
+EXPORT_SYMBOL_GPL(svc_sock_create);
+
+/*
+ * Destroy a svc_sock.
+ */
+void svc_sock_destroy(struct svc_xprt *xprt)
+{
+	if (xprt)
+		kfree(container_of(xprt, struct svc_sock, sk_xprt));
+}
+EXPORT_SYMBOL_GPL(svc_sock_destroy);
diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c
index 06ca058572f..f412a852bc7 100644
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -12,8 +12,9 @@
  *  -	Next, the caller puts together the RPC message, stuffs it into
  *	the request struct, and calls xprt_transmit().
  *  -	xprt_transmit sends the message and installs the caller on the
- *	transport's wait list. At the same time, it installs a timer that
- *	is run after the packet's timeout has expired.
+ *	transport's wait list. At the same time, if a reply is expected,
+ *	it installs a timer that is run after the packet's timeout has
+ *	expired.
  *  -	When a packet arrives, the data_ready handler walks the list of
  *	pending requests for that transport. If a matching XID is found, the
  *	caller is woken up, and the timer removed.
@@ -46,6 +47,8 @@
 #include <linux/sunrpc/clnt.h>
 #include <linux/sunrpc/metrics.h>
 
+#include "sunrpc.h"
+
 /*
  * Local variables
  */
@@ -192,8 +195,8 @@ EXPORT_SYMBOL_GPL(xprt_load_transport);
  */
 int xprt_reserve_xprt(struct rpc_task *task)
 {
-	struct rpc_xprt	*xprt = task->tk_xprt;
 	struct rpc_rqst *req = task->tk_rqstp;
+	struct rpc_xprt	*xprt = req->rq_xprt;
 
 	if (test_and_set_bit(XPRT_LOCKED, &xprt->state)) {
 		if (task == xprt->snd_task)
@@ -803,9 +806,10 @@ void xprt_complete_rqst(struct rpc_task *task, int copied)
 
 	list_del_init(&req->rq_list);
 	req->rq_private_buf.len = copied;
-	/* Ensure all writes are done before we update req->rq_received */
+	/* Ensure all writes are done before we update */
+	/* req->rq_reply_bytes_recvd */
 	smp_wmb();
-	req->rq_received = copied;
+	req->rq_reply_bytes_recvd = copied;
 	rpc_wake_up_queued_task(&xprt->pending, task);
 }
 EXPORT_SYMBOL_GPL(xprt_complete_rqst);
@@ -820,7 +824,7 @@ static void xprt_timer(struct rpc_task *task)
 	dprintk("RPC: %5u xprt_timer\n", task->tk_pid);
 
 	spin_lock_bh(&xprt->transport_lock);
-	if (!req->rq_received) {
+	if (!req->rq_reply_bytes_recvd) {
 		if (xprt->ops->timer)
 			xprt->ops->timer(task);
 	} else
@@ -842,8 +846,8 @@ int xprt_prepare_transmit(struct rpc_task *task)
 	dprintk("RPC: %5u xprt_prepare_transmit\n", task->tk_pid);
 
 	spin_lock_bh(&xprt->transport_lock);
-	if (req->rq_received && !req->rq_bytes_sent) {
-		err = req->rq_received;
+	if (req->rq_reply_bytes_recvd && !req->rq_bytes_sent) {
+		err = req->rq_reply_bytes_recvd;
 		goto out_unlock;
 	}
 	if (!xprt->ops->reserve_xprt(task))
@@ -855,7 +859,7 @@ out_unlock:
 
 void xprt_end_transmit(struct rpc_task *task)
 {
-	xprt_release_write(task->tk_xprt, task);
+	xprt_release_write(task->tk_rqstp->rq_xprt, task);
 }
 
 /**
@@ -872,8 +876,11 @@ void xprt_transmit(struct rpc_task *task)
 
 	dprintk("RPC: %5u xprt_transmit(%u)\n", task->tk_pid, req->rq_slen);
 
-	if (!req->rq_received) {
-		if (list_empty(&req->rq_list)) {
+	if (!req->rq_reply_bytes_recvd) {
+		if (list_empty(&req->rq_list) && rpc_reply_expected(task)) {
+			/*
+			 * Add to the list only if we're expecting a reply
+			 */
 			spin_lock_bh(&xprt->transport_lock);
 			/* Update the softirq receive buffer */
 			memcpy(&req->rq_private_buf, &req->rq_rcv_buf,
@@ -908,8 +915,13 @@ void xprt_transmit(struct rpc_task *task)
 	/* Don't race with disconnect */
 	if (!xprt_connected(xprt))
 		task->tk_status = -ENOTCONN;
-	else if (!req->rq_received)
+	else if (!req->rq_reply_bytes_recvd && rpc_reply_expected(task)) {
+		/*
+		 * Sleep on the pending queue since
+		 * we're expecting a reply.
+		 */
 		rpc_sleep_on(&xprt->pending, task, xprt_timer);
+	}
 	spin_unlock_bh(&xprt->transport_lock);
 }
 
@@ -982,11 +994,17 @@ static void xprt_request_init(struct rpc_task *task, struct rpc_xprt *xprt)
  */
 void xprt_release(struct rpc_task *task)
 {
-	struct rpc_xprt	*xprt = task->tk_xprt;
+	struct rpc_xprt	*xprt;
 	struct rpc_rqst	*req;
+	int is_bc_request;
 
 	if (!(req = task->tk_rqstp))
 		return;
+
+	/* Preallocated backchannel request? */
+	is_bc_request = bc_prealloc(req);
+
+	xprt = req->rq_xprt;
 	rpc_count_iostats(task);
 	spin_lock_bh(&xprt->transport_lock);
 	xprt->ops->release_xprt(xprt, task);
@@ -999,10 +1017,19 @@ void xprt_release(struct rpc_task *task)
 		mod_timer(&xprt->timer,
 				xprt->last_used + xprt->idle_timeout);
 	spin_unlock_bh(&xprt->transport_lock);
-	xprt->ops->buf_free(req->rq_buffer);
+	if (!bc_prealloc(req))
+		xprt->ops->buf_free(req->rq_buffer);
 	task->tk_rqstp = NULL;
 	if (req->rq_release_snd_buf)
 		req->rq_release_snd_buf(req);
+
+	/*
+	 * Early exit if this is a backchannel preallocated request.
+	 * There is no need to have it added to the RPC slot list.
+	 */
+	if (is_bc_request)
+		return;
+
 	memset(req, 0, sizeof(*req));	/* mark unused */
 
 	dprintk("RPC: %5u release request %p\n", task->tk_pid, req);
@@ -1049,6 +1076,11 @@ found:
 
 	INIT_LIST_HEAD(&xprt->free);
 	INIT_LIST_HEAD(&xprt->recv);
+#if defined(CONFIG_NFS_V4_1)
+	spin_lock_init(&xprt->bc_pa_lock);
+	INIT_LIST_HEAD(&xprt->bc_pa_list);
+#endif /* CONFIG_NFS_V4_1 */
+
 	INIT_WORK(&xprt->task_cleanup, xprt_autoclose);
 	setup_timer(&xprt->timer, xprt_init_autodisconnect,
 			(unsigned long)xprt);
diff --git a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
index 42a6f9f2028..9e884383134 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
@@ -397,14 +397,14 @@ static int rdma_read_xdr(struct svcxprt_rdma *xprt,
 	if (!ch)
 		return 0;
 
-	/* Allocate temporary reply and chunk maps */
-	rpl_map = svc_rdma_get_req_map();
-	chl_map = svc_rdma_get_req_map();
-
 	svc_rdma_rcl_chunk_counts(ch, &ch_count, &byte_count);
 	if (ch_count > RPCSVC_MAXPAGES)
 		return -EINVAL;
 
+	/* Allocate temporary reply and chunk maps */
+	rpl_map = svc_rdma_get_req_map();
+	chl_map = svc_rdma_get_req_map();
+
 	if (!xprt->sc_frmr_pg_list_len)
 		sge_count = map_read_chunks(xprt, rqstp, hdr_ctxt, rmsgp,
 					    rpl_map, chl_map, ch_count,
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index 6c2d6158655..83c73c4d017 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -34,6 +34,9 @@
 #include <linux/sunrpc/sched.h>
 #include <linux/sunrpc/xprtsock.h>
 #include <linux/file.h>
+#ifdef CONFIG_NFS_V4_1
+#include <linux/sunrpc/bc_xprt.h>
+#endif
 
 #include <net/sock.h>
 #include <net/checksum.h>
@@ -270,6 +273,13 @@ struct sock_xprt {
 #define TCP_RCV_COPY_FRAGHDR	(1UL << 1)
 #define TCP_RCV_COPY_XID	(1UL << 2)
 #define TCP_RCV_COPY_DATA	(1UL << 3)
+#define TCP_RCV_READ_CALLDIR	(1UL << 4)
+#define TCP_RCV_COPY_CALLDIR	(1UL << 5)
+
+/*
+ * TCP RPC flags
+ */
+#define TCP_RPC_REPLY		(1UL << 6)
 
 static inline struct sockaddr *xs_addr(struct rpc_xprt *xprt)
 {
@@ -956,7 +966,7 @@ static inline void xs_tcp_read_fraghdr(struct rpc_xprt *xprt, struct xdr_skb_rea
 	transport->tcp_offset = 0;
 
 	/* Sanity check of the record length */
-	if (unlikely(transport->tcp_reclen < 4)) {
+	if (unlikely(transport->tcp_reclen < 8)) {
 		dprintk("RPC:       invalid TCP record fragment length\n");
 		xprt_force_disconnect(xprt);
 		return;
@@ -991,33 +1001,77 @@ static inline void xs_tcp_read_xid(struct sock_xprt *transport, struct xdr_skb_r
 	if (used != len)
 		return;
 	transport->tcp_flags &= ~TCP_RCV_COPY_XID;
-	transport->tcp_flags |= TCP_RCV_COPY_DATA;
+	transport->tcp_flags |= TCP_RCV_READ_CALLDIR;
 	transport->tcp_copied = 4;
-	dprintk("RPC:       reading reply for XID %08x\n",
+	dprintk("RPC:       reading %s XID %08x\n",
+			(transport->tcp_flags & TCP_RPC_REPLY) ? "reply for"
+							      : "request with",
 			ntohl(transport->tcp_xid));
 	xs_tcp_check_fraghdr(transport);
 }
 
-static inline void xs_tcp_read_request(struct rpc_xprt *xprt, struct xdr_skb_reader *desc)
+static inline void xs_tcp_read_calldir(struct sock_xprt *transport,
+				       struct xdr_skb_reader *desc)
 {
-	struct sock_xprt *transport = container_of(xprt, struct sock_xprt, xprt);
-	struct rpc_rqst *req;
+	size_t len, used;
+	u32 offset;
+	__be32	calldir;
+
+	/*
+	 * We want transport->tcp_offset to be 8 at the end of this routine
+	 * (4 bytes for the xid and 4 bytes for the call/reply flag).
+	 * When this function is called for the first time,
+	 * transport->tcp_offset is 4 (after having already read the xid).
+	 */
+	offset = transport->tcp_offset - sizeof(transport->tcp_xid);
+	len = sizeof(calldir) - offset;
+	dprintk("RPC:       reading CALL/REPLY flag (%Zu bytes)\n", len);
+	used = xdr_skb_read_bits(desc, &calldir, len);
+	transport->tcp_offset += used;
+	if (used != len)
+		return;
+	transport->tcp_flags &= ~TCP_RCV_READ_CALLDIR;
+	transport->tcp_flags |= TCP_RCV_COPY_CALLDIR;
+	transport->tcp_flags |= TCP_RCV_COPY_DATA;
+	/*
+	 * We don't yet have the XDR buffer, so we will write the calldir
+	 * out after we get the buffer from the 'struct rpc_rqst'
+	 */
+	if (ntohl(calldir) == RPC_REPLY)
+		transport->tcp_flags |= TCP_RPC_REPLY;
+	else
+		transport->tcp_flags &= ~TCP_RPC_REPLY;
+	dprintk("RPC:       reading %s CALL/REPLY flag %08x\n",
+			(transport->tcp_flags & TCP_RPC_REPLY) ?
+				"reply for" : "request with", calldir);
+	xs_tcp_check_fraghdr(transport);
+}
+
+static inline void xs_tcp_read_common(struct rpc_xprt *xprt,
+				     struct xdr_skb_reader *desc,
+				     struct rpc_rqst *req)
+{
+	struct sock_xprt *transport =
+				container_of(xprt, struct sock_xprt, xprt);
 	struct xdr_buf *rcvbuf;
 	size_t len;
 	ssize_t r;
 
-	/* Find and lock the request corresponding to this xid */
-	spin_lock(&xprt->transport_lock);
-	req = xprt_lookup_rqst(xprt, transport->tcp_xid);
-	if (!req) {
-		transport->tcp_flags &= ~TCP_RCV_COPY_DATA;
-		dprintk("RPC:       XID %08x request not found!\n",
-				ntohl(transport->tcp_xid));
-		spin_unlock(&xprt->transport_lock);
-		return;
+	rcvbuf = &req->rq_private_buf;
+
+	if (transport->tcp_flags & TCP_RCV_COPY_CALLDIR) {
+		/*
+		 * Save the RPC direction in the XDR buffer
+		 */
+		__be32	calldir = transport->tcp_flags & TCP_RPC_REPLY ?
+					htonl(RPC_REPLY) : 0;
+
+		memcpy(rcvbuf->head[0].iov_base + transport->tcp_copied,
+			&calldir, sizeof(calldir));
+		transport->tcp_copied += sizeof(calldir);
+		transport->tcp_flags &= ~TCP_RCV_COPY_CALLDIR;
 	}
 
-	rcvbuf = &req->rq_private_buf;
 	len = desc->count;
 	if (len > transport->tcp_reclen - transport->tcp_offset) {
 		struct xdr_skb_reader my_desc;
@@ -1054,7 +1108,7 @@ static inline void xs_tcp_read_request(struct rpc_xprt *xprt, struct xdr_skb_rea
 				"tcp_offset = %u, tcp_reclen = %u\n",
 				xprt, transport->tcp_copied,
 				transport->tcp_offset, transport->tcp_reclen);
-		goto out;
+		return;
 	}
 
 	dprintk("RPC:       XID %08x read %Zd bytes\n",
@@ -1070,11 +1124,125 @@ static inline void xs_tcp_read_request(struct rpc_xprt *xprt, struct xdr_skb_rea
 			transport->tcp_flags &= ~TCP_RCV_COPY_DATA;
 	}
 
-out:
+	return;
+}
+
+/*
+ * Finds the request corresponding to the RPC xid and invokes the common
+ * tcp read code to read the data.
+ */
+static inline int xs_tcp_read_reply(struct rpc_xprt *xprt,
+				    struct xdr_skb_reader *desc)
+{
+	struct sock_xprt *transport =
+				container_of(xprt, struct sock_xprt, xprt);
+	struct rpc_rqst *req;
+
+	dprintk("RPC:       read reply XID %08x\n", ntohl(transport->tcp_xid));
+
+	/* Find and lock the request corresponding to this xid */
+	spin_lock(&xprt->transport_lock);
+	req = xprt_lookup_rqst(xprt, transport->tcp_xid);
+	if (!req) {
+		dprintk("RPC:       XID %08x request not found!\n",
+				ntohl(transport->tcp_xid));
+		spin_unlock(&xprt->transport_lock);
+		return -1;
+	}
+
+	xs_tcp_read_common(xprt, desc, req);
+
 	if (!(transport->tcp_flags & TCP_RCV_COPY_DATA))
 		xprt_complete_rqst(req->rq_task, transport->tcp_copied);
+
 	spin_unlock(&xprt->transport_lock);
-	xs_tcp_check_fraghdr(transport);
+	return 0;
+}
+
+#if defined(CONFIG_NFS_V4_1)
+/*
+ * Obtains an rpc_rqst previously allocated and invokes the common
+ * tcp read code to read the data.  The result is placed in the callback
+ * queue.
+ * If we're unable to obtain the rpc_rqst we schedule the closing of the
+ * connection and return -1.
+ */
+static inline int xs_tcp_read_callback(struct rpc_xprt *xprt,
+				       struct xdr_skb_reader *desc)
+{
+	struct sock_xprt *transport =
+				container_of(xprt, struct sock_xprt, xprt);
+	struct rpc_rqst *req;
+
+	req = xprt_alloc_bc_request(xprt);
+	if (req == NULL) {
+		printk(KERN_WARNING "Callback slot table overflowed\n");
+		xprt_force_disconnect(xprt);
+		return -1;
+	}
+
+	req->rq_xid = transport->tcp_xid;
+	dprintk("RPC:       read callback  XID %08x\n", ntohl(req->rq_xid));
+	xs_tcp_read_common(xprt, desc, req);
+
+	if (!(transport->tcp_flags & TCP_RCV_COPY_DATA)) {
+		struct svc_serv *bc_serv = xprt->bc_serv;
+
+		/*
+		 * Add callback request to callback list.  The callback
+		 * service sleeps on the sv_cb_waitq waiting for new
+		 * requests.  Wake it up after adding enqueing the
+		 * request.
+		 */
+		dprintk("RPC:       add callback request to list\n");
+		spin_lock(&bc_serv->sv_cb_lock);
+		list_add(&req->rq_bc_list, &bc_serv->sv_cb_list);
+		spin_unlock(&bc_serv->sv_cb_lock);
+		wake_up(&bc_serv->sv_cb_waitq);
+	}
+
+	req->rq_private_buf.len = transport->tcp_copied;
+
+	return 0;
+}
+
+static inline int _xs_tcp_read_data(struct rpc_xprt *xprt,
+					struct xdr_skb_reader *desc)
+{
+	struct sock_xprt *transport =
+				container_of(xprt, struct sock_xprt, xprt);
+
+	return (transport->tcp_flags & TCP_RPC_REPLY) ?
+		xs_tcp_read_reply(xprt, desc) :
+		xs_tcp_read_callback(xprt, desc);
+}
+#else
+static inline int _xs_tcp_read_data(struct rpc_xprt *xprt,
+					struct xdr_skb_reader *desc)
+{
+	return xs_tcp_read_reply(xprt, desc);
+}
+#endif /* CONFIG_NFS_V4_1 */
+
+/*
+ * Read data off the transport.  This can be either an RPC_CALL or an
+ * RPC_REPLY.  Relay the processing to helper functions.
+ */
+static void xs_tcp_read_data(struct rpc_xprt *xprt,
+				    struct xdr_skb_reader *desc)
+{
+	struct sock_xprt *transport =
+				container_of(xprt, struct sock_xprt, xprt);
+
+	if (_xs_tcp_read_data(xprt, desc) == 0)
+		xs_tcp_check_fraghdr(transport);
+	else {
+		/*
+		 * The transport_lock protects the request handling.
+		 * There's no need to hold it to update the tcp_flags.
+		 */
+		transport->tcp_flags &= ~TCP_RCV_COPY_DATA;
+	}
 }
 
 static inline void xs_tcp_read_discard(struct sock_xprt *transport, struct xdr_skb_reader *desc)
@@ -1114,9 +1282,14 @@ static int xs_tcp_data_recv(read_descriptor_t *rd_desc, struct sk_buff *skb, uns
 			xs_tcp_read_xid(transport, &desc);
 			continue;
 		}
+		/* Read in the call/reply flag */
+		if (transport->tcp_flags & TCP_RCV_READ_CALLDIR) {
+			xs_tcp_read_calldir(transport, &desc);
+			continue;
+		}
 		/* Read in the request data */
 		if (transport->tcp_flags & TCP_RCV_COPY_DATA) {
-			xs_tcp_read_request(xprt, &desc);
+			xs_tcp_read_data(xprt, &desc);
 			continue;
 		}
 		/* Skip over any trailing bytes on short reads */
@@ -1792,6 +1965,7 @@ static void xs_tcp_setup_socket(struct rpc_xprt *xprt,
 		 */
 		set_bit(XPRT_CONNECTION_CLOSE, &xprt->state);
 		xprt_force_disconnect(xprt);
+		break;
 	case -ECONNREFUSED:
 	case -ECONNRESET:
 	case -ENETUNREACH:
@@ -2010,6 +2184,9 @@ static struct rpc_xprt_ops xs_tcp_ops = {
 	.buf_free		= rpc_free,
 	.send_request		= xs_tcp_send_request,
 	.set_retrans_timeout	= xprt_set_retrans_timeout_def,
+#if defined(CONFIG_NFS_V4_1)
+	.release_request	= bc_release_request,
+#endif /* CONFIG_NFS_V4_1 */
 	.close			= xs_tcp_close,
 	.destroy		= xs_destroy,
 	.print_stats		= xs_tcp_print_stats,
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 9dcc6e7f96e..36d4e44d623 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -1946,7 +1946,7 @@ static int unix_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 
 	switch (cmd) {
 	case SIOCOUTQ:
-		amount = atomic_read(&sk->sk_wmem_alloc);
+		amount = sk_wmem_alloc_get(sk);
 		err = put_user(amount, (int __user *)arg);
 		break;
 	case SIOCINQ:
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 24168560eba..241bddd0b4f 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1687,13 +1687,52 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
 	if (err)
 		goto out_rtnl;
 
-	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
-	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP_VLAN) {
-		err = -EINVAL;
+	err = get_vlan(info->attrs[NL80211_ATTR_STA_VLAN], drv, &params.vlan);
+	if (err)
 		goto out;
+
+	/* validate settings */
+	err = 0;
+
+	switch (dev->ieee80211_ptr->iftype) {
+	case NL80211_IFTYPE_AP:
+	case NL80211_IFTYPE_AP_VLAN:
+		/* disallow mesh-specific things */
+		if (params.plink_action)
+			err = -EINVAL;
+		break;
+	case NL80211_IFTYPE_STATION:
+		/* disallow everything but AUTHORIZED flag */
+		if (params.plink_action)
+			err = -EINVAL;
+		if (params.vlan)
+			err = -EINVAL;
+		if (params.supported_rates)
+			err = -EINVAL;
+		if (params.ht_capa)
+			err = -EINVAL;
+		if (params.listen_interval >= 0)
+			err = -EINVAL;
+		if (params.sta_flags_mask & ~BIT(NL80211_STA_FLAG_AUTHORIZED))
+			err = -EINVAL;
+		break;
+	case NL80211_IFTYPE_MESH_POINT:
+		/* disallow things mesh doesn't support */
+		if (params.vlan)
+			err = -EINVAL;
+		if (params.ht_capa)
+			err = -EINVAL;
+		if (params.listen_interval >= 0)
+			err = -EINVAL;
+		if (params.supported_rates)
+			err = -EINVAL;
+		if (params.sta_flags_mask)
+			err = -EINVAL;
+		break;
+	default:
+		err = -EINVAL;
 	}
 
-	err = get_vlan(info->attrs[NL80211_ATTR_STA_VLAN], drv, &params.vlan);
 	if (err)
 		goto out;
 
@@ -1728,9 +1767,6 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
 	if (!info->attrs[NL80211_ATTR_MAC])
 		return -EINVAL;
 
-	if (!info->attrs[NL80211_ATTR_STA_AID])
-		return -EINVAL;
-
 	if (!info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL])
 		return -EINVAL;
 
@@ -1745,9 +1781,11 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
 	params.listen_interval =
 		nla_get_u16(info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL]);
 
-	params.aid = nla_get_u16(info->attrs[NL80211_ATTR_STA_AID]);
-	if (!params.aid || params.aid > IEEE80211_MAX_AID)
-		return -EINVAL;
+	if (info->attrs[NL80211_ATTR_STA_AID]) {
+		params.aid = nla_get_u16(info->attrs[NL80211_ATTR_STA_AID]);
+		if (!params.aid || params.aid > IEEE80211_MAX_AID)
+			return -EINVAL;
+	}
 
 	if (info->attrs[NL80211_ATTR_HT_CAPABILITY])
 		params.ht_capa =
@@ -1762,13 +1800,39 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
 	if (err)
 		goto out_rtnl;
 
-	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
-	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP_VLAN) {
-		err = -EINVAL;
+	err = get_vlan(info->attrs[NL80211_ATTR_STA_VLAN], drv, &params.vlan);
+	if (err)
 		goto out;
+
+	/* validate settings */
+	err = 0;
+
+	switch (dev->ieee80211_ptr->iftype) {
+	case NL80211_IFTYPE_AP:
+	case NL80211_IFTYPE_AP_VLAN:
+		/* all ok but must have AID */
+		if (!params.aid)
+			err = -EINVAL;
+		break;
+	case NL80211_IFTYPE_MESH_POINT:
+		/* disallow things mesh doesn't support */
+		if (params.vlan)
+			err = -EINVAL;
+		if (params.aid)
+			err = -EINVAL;
+		if (params.ht_capa)
+			err = -EINVAL;
+		if (params.listen_interval >= 0)
+			err = -EINVAL;
+		if (params.supported_rates)
+			err = -EINVAL;
+		if (params.sta_flags_mask)
+			err = -EINVAL;
+		break;
+	default:
+		err = -EINVAL;
 	}
 
-	err = get_vlan(info->attrs[NL80211_ATTR_STA_VLAN], drv, &params.vlan);
 	if (err)
 		goto out;
 
@@ -1812,7 +1876,8 @@ static int nl80211_del_station(struct sk_buff *skb, struct genl_info *info)
 		goto out_rtnl;
 
 	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
-	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP_VLAN) {
+	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP_VLAN &&
+	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT) {
 		err = -EINVAL;
 		goto out;
 	}
diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c
index ed80af8ca5f..21cdc872004 100644
--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -332,14 +332,14 @@ static unsigned int x25_new_lci(struct x25_neigh *nb)
 /*
  *	Deferred destroy.
  */
-void x25_destroy_socket(struct sock *);
+static void __x25_destroy_socket(struct sock *);
 
 /*
  *	handler for deferred kills.
  */
 static void x25_destroy_timer(unsigned long data)
 {
-	x25_destroy_socket((struct sock *)data);
+	x25_destroy_socket_from_timer((struct sock *)data);
 }
 
 /*
@@ -349,12 +349,10 @@ static void x25_destroy_timer(unsigned long data)
  *	will touch it and we are (fairly 8-) ) safe.
  *	Not static as it's used by the timer
  */
-void x25_destroy_socket(struct sock *sk)
+static void __x25_destroy_socket(struct sock *sk)
 {
 	struct sk_buff *skb;
 
-	sock_hold(sk);
-	lock_sock(sk);
 	x25_stop_heartbeat(sk);
 	x25_stop_timer(sk);
 
@@ -374,8 +372,7 @@ void x25_destroy_socket(struct sock *sk)
 		kfree_skb(skb);
 	}
 
-	if (atomic_read(&sk->sk_wmem_alloc) ||
-	    atomic_read(&sk->sk_rmem_alloc)) {
+	if (sk_has_allocations(sk)) {
 		/* Defer: outstanding buffers */
 		sk->sk_timer.expires  = jiffies + 10 * HZ;
 		sk->sk_timer.function = x25_destroy_timer;
@@ -385,7 +382,22 @@ void x25_destroy_socket(struct sock *sk)
 		/* drop last reference so sock_put will free */
 		__sock_put(sk);
 	}
+}
+
+void x25_destroy_socket_from_timer(struct sock *sk)
+{
+	sock_hold(sk);
+	bh_lock_sock(sk);
+	__x25_destroy_socket(sk);
+	bh_unlock_sock(sk);
+	sock_put(sk);
+}
 
+static void x25_destroy_socket(struct sock *sk)
+{
+	sock_hold(sk);
+	lock_sock(sk);
+	__x25_destroy_socket(sk);
 	release_sock(sk);
 	sock_put(sk);
 }
@@ -1259,8 +1271,8 @@ static int x25_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 
 	switch (cmd) {
 		case TIOCOUTQ: {
-			int amount = sk->sk_sndbuf -
-				     atomic_read(&sk->sk_wmem_alloc);
+			int amount = sk->sk_sndbuf - sk_wmem_alloc_get(sk);
+
 			if (amount < 0)
 				amount = 0;
 			rc = put_user(amount, (unsigned int __user *)argp);
diff --git a/net/x25/x25_proc.c b/net/x25/x25_proc.c
index 1afa44d25be..0a04e62e0e1 100644
--- a/net/x25/x25_proc.c
+++ b/net/x25/x25_proc.c
@@ -163,8 +163,8 @@ static int x25_seq_socket_show(struct seq_file *seq, void *v)
 		   devname, x25->lci & 0x0FFF, x25->state, x25->vs, x25->vr,
 		   x25->va, x25_display_timer(s) / HZ, x25->t2  / HZ,
 		   x25->t21 / HZ, x25->t22 / HZ, x25->t23 / HZ,
-		   atomic_read(&s->sk_wmem_alloc),
-		   atomic_read(&s->sk_rmem_alloc),
+		   sk_wmem_alloc_get(s),
+		   sk_rmem_alloc_get(s),
 		   s->sk_socket ? SOCK_INODE(s->sk_socket)->i_ino : 0L);
 out:
 	return 0;
diff --git a/net/x25/x25_timer.c b/net/x25/x25_timer.c
index d3e3e54db93..5c5db1a3639 100644
--- a/net/x25/x25_timer.c
+++ b/net/x25/x25_timer.c
@@ -113,7 +113,7 @@ static void x25_heartbeat_expiry(unsigned long param)
 			    (sk->sk_state == TCP_LISTEN &&
 			     sock_flag(sk, SOCK_DEAD))) {
 				bh_unlock_sock(sk);
-				x25_destroy_socket(sk);
+				x25_destroy_socket_from_timer(sk);
 				return;
 			}
 			break;
diff --git a/samples/trace_events/Makefile b/samples/trace_events/Makefile
index 0d428dc6728..0f8d92120c4 100644
--- a/samples/trace_events/Makefile
+++ b/samples/trace_events/Makefile
@@ -1,6 +1,14 @@
 # builds the trace events example kernel modules;
 # then to use one (as root):  insmod <module_name.ko>
 
+# If you include a trace header outside of include/trace/events
+# then the file that does the #define CREATE_TRACE_POINTS must
+# have that tracer file in its main search path. This is because
+# define_trace.h will include it, and must be able to find it from
+# the include/trace directory.
+#
+# Here trace-events-sample.c does the CREATE_TRACE_POINTS.
+#
 CFLAGS_trace-events-sample.o := -I$(src)
 
 obj-$(CONFIG_SAMPLE_TRACE_EVENTS) += trace-events-sample.o
diff --git a/samples/trace_events/trace-events-sample.h b/samples/trace_events/trace-events-sample.h
index 128a897687c..9977a756fb3 100644
--- a/samples/trace_events/trace-events-sample.h
+++ b/samples/trace_events/trace-events-sample.h
@@ -19,16 +19,21 @@
  * If TRACE_SYSTEM is defined, that will be the directory created
  * in the ftrace directory under /debugfs/tracing/events/<system>
  *
- * The define_trace.h belowe will also look for a file name of
+ * The define_trace.h below will also look for a file name of
  * TRACE_SYSTEM.h where TRACE_SYSTEM is what is defined here.
+ * In this case, it would look for sample.h
  *
- * If you want a different system than file name, you can override
- * the header name by defining TRACE_INCLUDE_FILE
+ * If the header name will be different than the system name
+ * (as in this case), then you can override the header name that
+ * define_trace.h will look up by defining TRACE_INCLUDE_FILE
  *
- * If this file was called, goofy.h, then we would define:
+ * This file is called trace-events-sample.h but we want the system
+ * to be called "sample". Therefore we must define the name of this
+ * file:
  *
- * #define TRACE_INCLUDE_FILE goofy
+ * #define TRACE_INCLUDE_FILE trace-events-sample
  *
+ * As we do an the bottom of this file.
  */
 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM sample
@@ -99,13 +104,13 @@ TRACE_EVENT(foo_bar,
  *
  * #define TRACE_INCLUDE_PATH ../../samples/trace_events
  *
- * But I chose to simply make it use the current directory and then in
- * the Makefile I added:
+ * But the safest and easiest way to simply make it use the directory
+ * that the file is in is to add in the Makefile:
  *
- * CFLAGS_trace-events-sample.o := -I$(PWD)/samples/trace_events/
+ * CFLAGS_trace-events-sample.o := -I$(src)
  *
  * This will make sure the current path is part of the include
- * structure for our file so that we can find it.
+ * structure for our file so that define_trace.h can find it.
  *
  * I could have made only the top level directory the include:
  *
@@ -115,8 +120,8 @@ TRACE_EVENT(foo_bar,
  *
  * #define TRACE_INCLUDE_PATH samples/trace_events
  *
- * But then if something defines "samples" or "trace_events" then we
- * could risk that being converted too, and give us an unexpected
+ * But then if something defines "samples" or "trace_events" as a macro
+ * then we could risk that being converted too, and give us an unexpected
  * result.
  */
 #undef TRACE_INCLUDE_PATH
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 2b706617c89..7a7778746ea 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -116,6 +116,17 @@ _a_flags       = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) $(KBUILD_SUBDIR_ASFLAGS) \
                  $(asflags-y) $(AFLAGS_$(basetarget).o)
 _cpp_flags     = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F))
 
+#
+# Enable gcov profiling flags for a file, directory or for all files depending
+# on variables GCOV_PROFILE_obj.o, GCOV_PROFILE and CONFIG_GCOV_PROFILE_ALL
+# (in this order)
+#
+ifeq ($(CONFIG_GCOV_KERNEL),y)
+_c_flags += $(if $(patsubst n%,, \
+		$(GCOV_PROFILE_$(basetarget).o)$(GCOV_PROFILE)$(CONFIG_GCOV_PROFILE_ALL)), \
+		$(CFLAGS_GCOV))
+endif
+
 # If building the kernel in a separate objtree expand all occurrences
 # of -Idir to -I$(srctree)/dir except for absolute paths (starting with '/').
 
diff --git a/scripts/basic/docproc.c b/scripts/basic/docproc.c
index 4c9523ef9c0..99ca7a69868 100644
--- a/scripts/basic/docproc.c
+++ b/scripts/basic/docproc.c
@@ -385,7 +385,7 @@ int main(int argc, char *argv[])
 	if (!srctree)
 		srctree = getcwd(NULL, 0);
 	kernsrctree = getenv("KBUILD_SRC");
-	if (!kernsrctree)
+	if (!kernsrctree || !*kernsrctree)
 		kernsrctree = srctree;
 	if (argc != 3) {
 		usage();
diff --git a/scripts/kallsyms.c b/scripts/kallsyms.c
index 3cb57895c9e..64343cc084b 100644
--- a/scripts/kallsyms.c
+++ b/scripts/kallsyms.c
@@ -167,11 +167,11 @@ static int symbol_valid_tr(struct sym_entry *s)
 	for (i = 0; i < ARRAY_SIZE(text_ranges); ++i) {
 		tr = &text_ranges[i];
 
-		if (s->addr >= tr->start && s->addr < tr->end)
-			return 0;
+		if (s->addr >= tr->start && s->addr <= tr->end)
+			return 1;
 	}
 
-	return 1;
+	return 0;
 }
 
 static int symbol_valid(struct sym_entry *s)
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index a193fa3f527..ed591e9b7d1 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -1468,6 +1468,8 @@ sub dump_enum($$) {
 	    }
 
 	}
+	# strip kmemcheck_bitfield_{begin,end}.*;
+	$members =~ s/kmemcheck_bitfield_.*?;//gos;
 
 	output_declaration($declaration_name,
 			   'enum',
@@ -1651,6 +1653,15 @@ sub push_parameter($$$) {
 	}
 	}
 
+	# strip spaces from $param so that it is one continous string
+	# on @parameterlist;
+	# this fixes a problem where check_sections() cannot find
+	# a parameter like "addr[6 + 2]" because it actually appears
+	# as "addr[6", "+", "2]" on the parameter list;
+	# but it's better to maintain the param string unchanged for output,
+	# so just weaken the string compare in check_sections() to ignore
+	# "[blah" in a parameter string;
+	###$param =~ s/\s*//g;
 	push @parameterlist, $param;
 	$parametertypes{$param} = $type;
 }
@@ -1669,6 +1680,14 @@ sub check_sections($$$$$$) {
 			$prm_clean = $prms[$px];
 			$prm_clean =~ s/\[.*\]//;
 			$prm_clean =~ s/__attribute__\s*\(\([a-z,_\*\s\(\)]*\)\)//;
+			# ignore array size in a parameter string;
+			# however, the original param string may contain
+			# spaces, e.g.:  addr[6 + 2]
+			# and this appears in @prms as "addr[6" since the
+			# parameter list is split at spaces;
+			# hence just ignore "[..." for the sections check;
+			$prm_clean =~ s/\[.*//;
+
 			##$prm_clean =~ s/^\**//;
 			if ($prm_clean eq $sects[$sx]) {
 				$err = 0;
diff --git a/security/device_cgroup.c b/security/device_cgroup.c
index 5fda7df1972..b8186bac8b7 100644
--- a/security/device_cgroup.c
+++ b/security/device_cgroup.c
@@ -490,7 +490,7 @@ int devcgroup_inode_permission(struct inode *inode, int mask)
 
 	list_for_each_entry_rcu(wh, &dev_cgroup->whitelist, list) {
 		if (wh->type & DEV_ALL)
-			goto acc_check;
+			goto found;
 		if ((wh->type & DEV_BLOCK) && !S_ISBLK(inode->i_mode))
 			continue;
 		if ((wh->type & DEV_CHAR) && !S_ISCHR(inode->i_mode))
@@ -499,11 +499,12 @@ int devcgroup_inode_permission(struct inode *inode, int mask)
 			continue;
 		if (wh->minor != ~0 && wh->minor != iminor(inode))
 			continue;
-acc_check:
+
 		if ((mask & MAY_WRITE) && !(wh->access & ACC_WRITE))
 			continue;
 		if ((mask & MAY_READ) && !(wh->access & ACC_READ))
 			continue;
+found:
 		rcu_read_unlock();
 		return 0;
 	}
@@ -527,7 +528,7 @@ int devcgroup_inode_mknod(int mode, dev_t dev)
 
 	list_for_each_entry_rcu(wh, &dev_cgroup->whitelist, list) {
 		if (wh->type & DEV_ALL)
-			goto acc_check;
+			goto found;
 		if ((wh->type & DEV_BLOCK) && !S_ISBLK(mode))
 			continue;
 		if ((wh->type & DEV_CHAR) && !S_ISCHR(mode))
@@ -536,9 +537,10 @@ int devcgroup_inode_mknod(int mode, dev_t dev)
 			continue;
 		if (wh->minor != ~0 && wh->minor != MINOR(dev))
 			continue;
-acc_check:
+
 		if (!(wh->access & ACC_MKNOD))
 			continue;
+found:
 		rcu_read_unlock();
 		return 0;
 	}
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index 84da3ba17c8..ac2150e0670 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -320,7 +320,7 @@ int snd_pcm_hw_refine(struct snd_pcm_substream *substream,
                     snd_mask_max(&params->masks[SNDRV_PCM_HW_PARAM_CHANNELS])) {
 			changed = substream->ops->ioctl(substream,
 					SNDRV_PCM_IOCTL1_FIFO_SIZE, params);
-			if (params < 0)
+			if (changed < 0)
 				return changed;
 		}
 	}
diff --git a/sound/core/seq/seq_midi_event.c b/sound/core/seq/seq_midi_event.c
index 8284f176a34..b5d6ea4904c 100644
--- a/sound/core/seq/seq_midi_event.c
+++ b/sound/core/seq/seq_midi_event.c
@@ -504,10 +504,10 @@ static int extra_decode_xrpn(struct snd_midi_event *dev, unsigned char *buf,
 	if (dev->nostat && count < 12)
 		return -ENOMEM;
 	cmd = MIDI_CMD_CONTROL|(ev->data.control.channel & 0x0f);
-	bytes[0] = ev->data.control.param & 0x007f;
-	bytes[1] = (ev->data.control.param & 0x3f80) >> 7;
-	bytes[2] = ev->data.control.value & 0x007f;
-	bytes[3] = (ev->data.control.value & 0x3f80) >> 7;
+	bytes[0] = (ev->data.control.param & 0x3f80) >> 7;
+	bytes[1] = ev->data.control.param & 0x007f;
+	bytes[2] = (ev->data.control.value & 0x3f80) >> 7;
+	bytes[3] = ev->data.control.value & 0x007f;
 	if (cmd != dev->lastcmd && !dev->nostat) {
 		if (count < 9)
 			return -ENOMEM;
diff --git a/sound/pci/ctxfi/ctatc.c b/sound/pci/ctxfi/ctatc.c
index b0adc809400..a49c7664730 100644
--- a/sound/pci/ctxfi/ctatc.c
+++ b/sound/pci/ctxfi/ctatc.c
@@ -46,8 +46,6 @@ static struct snd_pci_quirk __devinitdata subsys_20k1_list[] = {
 	SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, 0x0031, "SB073x", CTSB073X),
 	SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_CREATIVE, 0xf000, 0x6000,
 			   "UAA", CTUAA),
-	SND_PCI_QUIRK_VENDOR(PCI_VENDOR_ID_CREATIVE,
-			     "Unknown", CT20K1_UNKNOWN),
 	{ } /* terminator */
 };
 
@@ -67,13 +65,16 @@ static struct snd_pci_quirk __devinitdata subsys_20k2_list[] = {
 };
 
 static const char *ct_subsys_name[NUM_CTCARDS] = {
+	/* 20k1 models */
 	[CTSB055X]	= "SB055x",
 	[CTSB073X]	= "SB073x",
-	[CTSB0760]	= "SB076x",
 	[CTUAA]		= "UAA",
 	[CT20K1_UNKNOWN] = "Unknown",
+	/* 20k2 models */
+	[CTSB0760]	= "SB076x",
 	[CTHENDRIX]	= "Hendrix",
 	[CTSB0880]	= "SB0880",
+	[CT20K2_UNKNOWN] = "Unknown",
 };
 
 static struct {
@@ -260,13 +261,8 @@ static int atc_pcm_playback_prepare(struct ct_atc *atc, struct ct_atc_pcm *apcm)
 	int device = apcm->substream->pcm->device;
 	unsigned int pitch;
 
-	if (NULL != apcm->src) {
-		/* Prepared pcm playback */
-		return 0;
-	}
-
 	/* first release old resources */
-	atc->pcm_release_resources(atc, apcm);
+	atc_pcm_release_resources(atc, apcm);
 
 	/* Get SRC resource */
 	desc.multi = apcm->substream->runtime->channels;
@@ -660,10 +656,7 @@ static int atc_pcm_capture_prepare(struct ct_atc *atc, struct ct_atc_pcm *apcm)
 	unsigned int pitch;
 	int mix_base = 0, imp_base = 0;
 
-	if (NULL != apcm->src) {
-		/* Prepared pcm capture */
-		return 0;
-	}
+	atc_pcm_release_resources(atc, apcm);
 
 	/* Get needed resources. */
 	err = atc_pcm_capture_get_resources(atc, apcm);
@@ -866,7 +859,7 @@ spdif_passthru_playback_setup(struct ct_atc *atc, struct ct_atc_pcm *apcm)
 	struct dao *dao = container_of(atc->daios[SPDIFOO], struct dao, daio);
 	unsigned int rate = apcm->substream->runtime->rate;
 	unsigned int status;
-	int err;
+	int err = 0;
 	unsigned char iec958_con_fs;
 
 	switch (rate) {
@@ -907,8 +900,7 @@ spdif_passthru_playback_prepare(struct ct_atc *atc, struct ct_atc_pcm *apcm)
 	int err;
 	int i;
 
-	if (NULL != apcm->src)
-		return 0;
+	atc_pcm_release_resources(atc, apcm);
 
 	/* Configure SPDIFOO and PLL to passthrough mode;
 	 * determine pll_rate. */
@@ -1115,32 +1107,20 @@ static int atc_spdif_out_passthru(struct ct_atc *atc, unsigned char state)
 	return err;
 }
 
-static int ct_atc_destroy(struct ct_atc *atc)
+static int atc_release_resources(struct ct_atc *atc)
 {
-	struct daio_mgr *daio_mgr;
-	struct dao *dao;
-	struct dai *dai;
-	struct daio *daio;
-	struct sum_mgr *sum_mgr;
-	struct src_mgr *src_mgr;
-	struct srcimp_mgr *srcimp_mgr;
-	struct srcimp *srcimp;
-	struct ct_mixer *mixer;
-	int i = 0;
-
-	if (NULL == atc)
-		return 0;
-
-	if (atc->timer) {
-		ct_timer_free(atc->timer);
-		atc->timer = NULL;
-	}
-
-	/* Stop hardware and disable all interrupts */
-	if (NULL != atc->hw)
-		((struct hw *)atc->hw)->card_stop(atc->hw);
-
-	/* Destroy internal mixer objects */
+	int i;
+	struct daio_mgr *daio_mgr = NULL;
+	struct dao *dao = NULL;
+	struct dai *dai = NULL;
+	struct daio *daio = NULL;
+	struct sum_mgr *sum_mgr = NULL;
+	struct src_mgr *src_mgr = NULL;
+	struct srcimp_mgr *srcimp_mgr = NULL;
+	struct srcimp *srcimp = NULL;
+	struct ct_mixer *mixer = NULL;
+
+	/* disconnect internal mixer objects */
 	if (NULL != atc->mixer) {
 		mixer = atc->mixer;
 		mixer->set_input_left(mixer, MIX_LINE_IN, NULL);
@@ -1149,7 +1129,6 @@ static int ct_atc_destroy(struct ct_atc *atc)
 		mixer->set_input_right(mixer, MIX_MIC_IN, NULL);
 		mixer->set_input_left(mixer, MIX_SPDIF_IN, NULL);
 		mixer->set_input_right(mixer, MIX_SPDIF_IN, NULL);
-		ct_mixer_destroy(atc->mixer);
 	}
 
 	if (NULL != atc->daios) {
@@ -1167,6 +1146,7 @@ static int ct_atc_destroy(struct ct_atc *atc)
 			daio_mgr->put_daio(daio_mgr, daio);
 		}
 		kfree(atc->daios);
+		atc->daios = NULL;
 	}
 
 	if (NULL != atc->pcm) {
@@ -1175,6 +1155,7 @@ static int ct_atc_destroy(struct ct_atc *atc)
 			sum_mgr->put_sum(sum_mgr, atc->pcm[i]);
 
 		kfree(atc->pcm);
+		atc->pcm = NULL;
 	}
 
 	if (NULL != atc->srcs) {
@@ -1183,6 +1164,7 @@ static int ct_atc_destroy(struct ct_atc *atc)
 			src_mgr->put_src(src_mgr, atc->srcs[i]);
 
 		kfree(atc->srcs);
+		atc->srcs = NULL;
 	}
 
 	if (NULL != atc->srcimps) {
@@ -1193,8 +1175,30 @@ static int ct_atc_destroy(struct ct_atc *atc)
 			srcimp_mgr->put_srcimp(srcimp_mgr, atc->srcimps[i]);
 		}
 		kfree(atc->srcimps);
+		atc->srcimps = NULL;
+	}
+
+	return 0;
+}
+
+static int ct_atc_destroy(struct ct_atc *atc)
+{
+	int i = 0;
+
+	if (NULL == atc)
+		return 0;
+
+	if (atc->timer) {
+		ct_timer_free(atc->timer);
+		atc->timer = NULL;
 	}
 
+	atc_release_resources(atc);
+
+	/* Destroy internal mixer objects */
+	if (NULL != atc->mixer)
+		ct_mixer_destroy(atc->mixer);
+
 	for (i = 0; i < NUM_RSCTYP; i++) {
 		if ((NULL != rsc_mgr_funcs[i].destroy) &&
 		    (NULL != atc->rsc_mgrs[i]))
@@ -1240,9 +1244,21 @@ static int __devinit atc_identify_card(struct ct_atc *atc)
 		return -ENOENT;
 	}
 	p = snd_pci_quirk_lookup(atc->pci, list);
-	if (!p)
-		return -ENOENT;
-	atc->model = p->value;
+	if (p) {
+		if (p->value < 0) {
+			printk(KERN_ERR "ctxfi: "
+			       "Device %04x:%04x is black-listed\n",
+			       atc->pci->subsystem_vendor,
+			       atc->pci->subsystem_device);
+			return -ENOENT;
+		}
+		atc->model = p->value;
+	} else {
+		if (atc->chip_type == ATC20K1)
+			atc->model = CT20K1_UNKNOWN;
+		else
+			atc->model = CT20K2_UNKNOWN;
+	}
 	atc->model_name = ct_subsys_name[atc->model];
 	snd_printd("ctxfi: chip %s model %s (%04x:%04x) is found\n",
 		   atc->chip_name, atc->model_name,
@@ -1310,7 +1326,7 @@ static int __devinit atc_create_hw_devs(struct ct_atc *atc)
 	return 0;
 }
 
-static int __devinit atc_get_resources(struct ct_atc *atc)
+static int atc_get_resources(struct ct_atc *atc)
 {
 	struct daio_desc da_desc = {0};
 	struct daio_mgr *daio_mgr;
@@ -1407,16 +1423,10 @@ static int __devinit atc_get_resources(struct ct_atc *atc)
 		atc->n_pcm++;
 	}
 
-	err = ct_mixer_create(atc, (struct ct_mixer **)&atc->mixer);
-	if (err) {
-		printk(KERN_ERR "ctxfi: Failed to create mixer obj!!!\n");
-		return err;
-	}
-
 	return 0;
 }
 
-static void __devinit
+static void
 atc_connect_dai(struct src_mgr *src_mgr, struct dai *dai,
 		struct src **srcs, struct srcimp **srcimps)
 {
@@ -1455,7 +1465,7 @@ atc_connect_dai(struct src_mgr *src_mgr, struct dai *dai,
 	src_mgr->commit_write(src_mgr); /* Synchronously enable SRCs */
 }
 
-static void __devinit atc_connect_resources(struct ct_atc *atc)
+static void atc_connect_resources(struct ct_atc *atc)
 {
 	struct dai *dai;
 	struct dao *dao;
@@ -1501,6 +1511,84 @@ static void __devinit atc_connect_resources(struct ct_atc *atc)
 	}
 }
 
+#ifdef CONFIG_PM
+static int atc_suspend(struct ct_atc *atc, pm_message_t state)
+{
+	int i;
+	struct hw *hw = atc->hw;
+
+	snd_power_change_state(atc->card, SNDRV_CTL_POWER_D3hot);
+
+	for (i = FRONT; i < NUM_PCMS; i++) {
+		if (!atc->pcms[i])
+			continue;
+
+		snd_pcm_suspend_all(atc->pcms[i]);
+	}
+
+	atc_release_resources(atc);
+
+	hw->suspend(hw, state);
+
+	return 0;
+}
+
+static int atc_hw_resume(struct ct_atc *atc)
+{
+	struct hw *hw = atc->hw;
+	struct card_conf info = {0};
+
+	/* Re-initialize card hardware. */
+	info.rsr = atc->rsr;
+	info.msr = atc->msr;
+	info.vm_pgt_phys = atc_get_ptp_phys(atc, 0);
+	return hw->resume(hw, &info);
+}
+
+static int atc_resources_resume(struct ct_atc *atc)
+{
+	struct ct_mixer *mixer;
+	int err = 0;
+
+	/* Get resources */
+	err = atc_get_resources(atc);
+	if (err < 0) {
+		atc_release_resources(atc);
+		return err;
+	}
+
+	/* Build topology */
+	atc_connect_resources(atc);
+
+	mixer = atc->mixer;
+	mixer->resume(mixer);
+
+	return 0;
+}
+
+static int atc_resume(struct ct_atc *atc)
+{
+	int err = 0;
+
+	/* Do hardware resume. */
+	err = atc_hw_resume(atc);
+	if (err < 0) {
+		printk(KERN_ERR "ctxfi: pci_enable_device failed, "
+		       "disabling device\n");
+		snd_card_disconnect(atc->card);
+		return err;
+	}
+
+	err = atc_resources_resume(atc);
+	if (err < 0)
+		return err;
+
+	snd_power_change_state(atc->card, SNDRV_CTL_POWER_D0);
+
+	return 0;
+}
+#endif
+
 static struct ct_atc atc_preset __devinitdata = {
 	.map_audio_buffer = ct_map_audio_buffer,
 	.unmap_audio_buffer = ct_unmap_audio_buffer,
@@ -1529,6 +1617,10 @@ static struct ct_atc atc_preset __devinitdata = {
 	.spdif_out_set_status = atc_spdif_out_set_status,
 	.spdif_out_passthru = atc_spdif_out_passthru,
 	.have_digit_io_switch = atc_have_digit_io_switch,
+#ifdef CONFIG_PM
+	.suspend = atc_suspend,
+	.resume = atc_resume,
+#endif
 };
 
 /**
@@ -1587,6 +1679,12 @@ int __devinit ct_atc_create(struct snd_card *card, struct pci_dev *pci,
 	if (err < 0)
 		goto error1;
 
+	err = ct_mixer_create(atc, (struct ct_mixer **)&atc->mixer);
+	if (err) {
+		printk(KERN_ERR "ctxfi: Failed to create mixer obj!!!\n");
+		goto error1;
+	}
+
 	/* Get resources */
 	err = atc_get_resources(atc);
 	if (err < 0)
diff --git a/sound/pci/ctxfi/ctatc.h b/sound/pci/ctxfi/ctatc.h
index 9fe620ea5f3..9fd8a570894 100644
--- a/sound/pci/ctxfi/ctatc.h
+++ b/sound/pci/ctxfi/ctatc.h
@@ -136,6 +136,13 @@ struct ct_atc {
 	unsigned char n_pcm;
 
 	struct ct_timer *timer;
+
+#ifdef CONFIG_PM
+	int (*suspend)(struct ct_atc *atc, pm_message_t state);
+	int (*resume)(struct ct_atc *atc);
+#define NUM_PCMS (NUM_CTALSADEVS - 1)
+	struct snd_pcm *pcms[NUM_PCMS];
+#endif
 };
 
 
diff --git a/sound/pci/ctxfi/cthardware.h b/sound/pci/ctxfi/cthardware.h
index 4a8e04f090a..af55405f5de 100644
--- a/sound/pci/ctxfi/cthardware.h
+++ b/sound/pci/ctxfi/cthardware.h
@@ -30,13 +30,16 @@ enum CHIPTYP {
 enum CTCARDS {
 	/* 20k1 models */
 	CTSB055X,
+	CT20K1_MODEL_FIRST = CTSB055X,
 	CTSB073X,
 	CTUAA,
 	CT20K1_UNKNOWN,
 	/* 20k2 models */
 	CTSB0760,
+	CT20K2_MODEL_FIRST = CTSB0760,
 	CTHENDRIX,
 	CTSB0880,
+	CT20K2_UNKNOWN,
 	NUM_CTCARDS		/* This should always be the last */
 };
 
@@ -61,6 +64,10 @@ struct hw {
 	int (*card_init)(struct hw *hw, struct card_conf *info);
 	int (*card_stop)(struct hw *hw);
 	int (*pll_init)(struct hw *hw, unsigned int rsr);
+#ifdef CONFIG_PM
+	int (*suspend)(struct hw *hw, pm_message_t state);
+	int (*resume)(struct hw *hw, struct card_conf *info);
+#endif
 	int (*is_adc_source_selected)(struct hw *hw, enum ADCSRC source);
 	int (*select_adc_source)(struct hw *hw, enum ADCSRC source);
 	int (*have_digit_io_switch)(struct hw *hw);
diff --git a/sound/pci/ctxfi/cthw20k1.c b/sound/pci/ctxfi/cthw20k1.c
index cb69d9ddfbe..ad3e1d14446 100644
--- a/sound/pci/ctxfi/cthw20k1.c
+++ b/sound/pci/ctxfi/cthw20k1.c
@@ -1911,9 +1911,17 @@ static int hw_card_start(struct hw *hw)
 		goto error1;
 	}
 
-	err = pci_request_regions(pci, "XFi");
-	if (err < 0)
-		goto error1;
+	if (!hw->io_base) {
+		err = pci_request_regions(pci, "XFi");
+		if (err < 0)
+			goto error1;
+
+		if (hw->model == CTUAA)
+			hw->io_base = pci_resource_start(pci, 5);
+		else
+			hw->io_base = pci_resource_start(pci, 0);
+
+	}
 
 	/* Switch to X-Fi mode from UAA mode if neeeded */
 	if (hw->model == CTUAA) {
@@ -1921,18 +1929,17 @@ static int hw_card_start(struct hw *hw)
 		if (err)
 			goto error2;
 
-		hw->io_base = pci_resource_start(pci, 5);
-	} else {
-		hw->io_base = pci_resource_start(pci, 0);
 	}
 
-	err = request_irq(pci->irq, ct_20k1_interrupt, IRQF_SHARED,
-			  "ctxfi", hw);
-	if (err < 0) {
-		printk(KERN_ERR "XFi: Cannot get irq %d\n", pci->irq);
-		goto error2;
+	if (hw->irq < 0) {
+		err = request_irq(pci->irq, ct_20k1_interrupt, IRQF_SHARED,
+				  "ctxfi", hw);
+		if (err < 0) {
+			printk(KERN_ERR "XFi: Cannot get irq %d\n", pci->irq);
+			goto error2;
+		}
+		hw->irq = pci->irq;
 	}
-	hw->irq = pci->irq;
 
 	pci_set_master(pci);
 
@@ -1948,6 +1955,15 @@ error1:
 
 static int hw_card_stop(struct hw *hw)
 {
+	unsigned int data;
+
+	/* disable transport bus master and queueing of request */
+	hw_write_20kx(hw, TRNCTL, 0x00);
+
+	/* disable pll */
+	data = hw_read_20kx(hw, PLLCTL);
+	hw_write_20kx(hw, PLLCTL, (data & (~(0x0F<<12))));
+
 	/* TODO: Disable interrupt and so on... */
 	if (hw->irq >= 0)
 		synchronize_irq(hw->irq);
@@ -1987,11 +2003,9 @@ static int hw_card_init(struct hw *hw, struct card_conf *info)
 	struct trn_conf trn_info = {0};
 
 	/* Get PCI io port base address and do Hendrix switch if needed. */
-	if (!hw->io_base) {
-		err = hw_card_start(hw);
-		if (err)
-			return err;
-	}
+	err = hw_card_start(hw);
+	if (err)
+		return err;
 
 	/* PLL init */
 	err = hw_pll_init(hw, info->rsr);
@@ -2064,6 +2078,37 @@ static int hw_card_init(struct hw *hw, struct card_conf *info)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int hw_suspend(struct hw *hw, pm_message_t state)
+{
+	struct pci_dev *pci = hw->pci;
+
+	hw_card_stop(hw);
+
+	if (hw->model == CTUAA) {
+		/* Switch to UAA config space. */
+		pci_write_config_dword(pci, UAA_CFG_SPACE_FLAG, 0x0);
+	}
+
+	pci_disable_device(pci);
+	pci_save_state(pci);
+	pci_set_power_state(pci, pci_choose_state(pci, state));
+
+	return 0;
+}
+
+static int hw_resume(struct hw *hw, struct card_conf *info)
+{
+	struct pci_dev *pci = hw->pci;
+
+	pci_set_power_state(pci, PCI_D0);
+	pci_restore_state(pci);
+
+	/* Re-initialize card hardware. */
+	return hw_card_init(hw, info);
+}
+#endif
+
 static u32 hw_read_20kx(struct hw *hw, u32 reg)
 {
 	u32 value;
@@ -2128,6 +2173,10 @@ static struct hw ct20k1_preset __devinitdata = {
 	.is_adc_source_selected = hw_is_adc_input_selected,
 	.select_adc_source = hw_adc_input_select,
 	.have_digit_io_switch = hw_have_digit_io_switch,
+#ifdef CONFIG_PM
+	.suspend = hw_suspend,
+	.resume = hw_resume,
+#endif
 
 	.src_rsc_get_ctrl_blk = src_get_rsc_ctrl_blk,
 	.src_rsc_put_ctrl_blk = src_put_rsc_ctrl_blk,
diff --git a/sound/pci/ctxfi/cthw20k2.c b/sound/pci/ctxfi/cthw20k2.c
index 4493a51c6b0..dec46d04b04 100644
--- a/sound/pci/ctxfi/cthw20k2.c
+++ b/sound/pci/ctxfi/cthw20k2.c
@@ -1860,16 +1860,18 @@ static int hw_card_start(struct hw *hw)
 		goto error1;
 	}
 
-	err = pci_request_regions(pci, "XFi");
-	if (err < 0)
-		goto error1;
+	if (!hw->io_base) {
+		err = pci_request_regions(pci, "XFi");
+		if (err < 0)
+			goto error1;
 
-	hw->io_base = pci_resource_start(hw->pci, 2);
-	hw->mem_base = (unsigned long)ioremap(hw->io_base,
+		hw->io_base = pci_resource_start(hw->pci, 2);
+		hw->mem_base = (unsigned long)ioremap(hw->io_base,
 					pci_resource_len(hw->pci, 2));
-	if (NULL == (void *)hw->mem_base) {
-		err = -ENOENT;
-		goto error2;
+		if (NULL == (void *)hw->mem_base) {
+			err = -ENOENT;
+			goto error2;
+		}
 	}
 
 	/* Switch to 20k2 mode from UAA mode. */
@@ -1901,6 +1903,15 @@ error1:
 
 static int hw_card_stop(struct hw *hw)
 {
+	unsigned int data;
+
+	/* disable transport bus master and queueing of request */
+	hw_write_20kx(hw, TRANSPORT_CTL, 0x00);
+
+	/* disable pll */
+	data = hw_read_20kx(hw, PLL_ENB);
+	hw_write_20kx(hw, PLL_ENB, (data & (~0x07)));
+
 	/* TODO: Disable interrupt and so on... */
 	return 0;
 }
@@ -1939,11 +1950,9 @@ static int hw_card_init(struct hw *hw, struct card_conf *info)
 
 	/* Get PCI io port/memory base address and
 	 * do 20kx core switch if needed. */
-	if (!hw->io_base) {
-		err = hw_card_start(hw);
-		if (err)
-			return err;
-	}
+	err = hw_card_start(hw);
+	if (err)
+		return err;
 
 	/* PLL init */
 	err = hw_pll_init(hw, info->rsr);
@@ -2006,6 +2015,32 @@ static int hw_card_init(struct hw *hw, struct card_conf *info)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int hw_suspend(struct hw *hw, pm_message_t state)
+{
+	struct pci_dev *pci = hw->pci;
+
+	hw_card_stop(hw);
+
+	pci_disable_device(pci);
+	pci_save_state(pci);
+	pci_set_power_state(pci, pci_choose_state(pci, state));
+
+	return 0;
+}
+
+static int hw_resume(struct hw *hw, struct card_conf *info)
+{
+	struct pci_dev *pci = hw->pci;
+
+	pci_set_power_state(pci, PCI_D0);
+	pci_restore_state(pci);
+
+	/* Re-initialize card hardware. */
+	return hw_card_init(hw, info);
+}
+#endif
+
 static u32 hw_read_20kx(struct hw *hw, u32 reg)
 {
 	return readl((void *)(hw->mem_base + reg));
@@ -2025,6 +2060,10 @@ static struct hw ct20k2_preset __devinitdata = {
 	.is_adc_source_selected = hw_is_adc_input_selected,
 	.select_adc_source = hw_adc_input_select,
 	.have_digit_io_switch = hw_have_digit_io_switch,
+#ifdef CONFIG_PM
+	.suspend = hw_suspend,
+	.resume = hw_resume,
+#endif
 
 	.src_rsc_get_ctrl_blk = src_get_rsc_ctrl_blk,
 	.src_rsc_put_ctrl_blk = src_put_rsc_ctrl_blk,
diff --git a/sound/pci/ctxfi/ctmixer.c b/sound/pci/ctxfi/ctmixer.c
index 666722d9de4..f26d7cd9db9 100644
--- a/sound/pci/ctxfi/ctmixer.c
+++ b/sound/pci/ctxfi/ctmixer.c
@@ -462,6 +462,43 @@ do_digit_io_switch(struct ct_atc *atc, int state)
 	return;
 }
 
+static void do_switch(struct ct_atc *atc, enum CTALSA_MIXER_CTL type, int state)
+{
+	struct ct_mixer *mixer = atc->mixer;
+
+	/* Do changes in mixer. */
+	if ((SWH_CAPTURE_START <= type) && (SWH_CAPTURE_END >= type)) {
+		if (state) {
+			ct_mixer_recording_select(mixer,
+						  get_amixer_index(type));
+		} else {
+			ct_mixer_recording_unselect(mixer,
+						    get_amixer_index(type));
+		}
+	}
+	/* Do changes out of mixer. */
+	if (state && (MIXER_LINEIN_C_S == type || MIXER_MIC_C_S == type))
+		do_line_mic_switch(atc, type);
+	else if (MIXER_WAVEF_P_S == type)
+		atc->line_front_unmute(atc, state);
+	else if (MIXER_WAVES_P_S == type)
+		atc->line_surround_unmute(atc, state);
+	else if (MIXER_WAVEC_P_S == type)
+		atc->line_clfe_unmute(atc, state);
+	else if (MIXER_WAVER_P_S == type)
+		atc->line_rear_unmute(atc, state);
+	else if (MIXER_LINEIN_P_S == type)
+		atc->line_in_unmute(atc, state);
+	else if (MIXER_SPDIFO_P_S == type)
+		atc->spdif_out_unmute(atc, state);
+	else if (MIXER_SPDIFI_P_S == type)
+		atc->spdif_in_unmute(atc, state);
+	else if (MIXER_DIGITAL_IO_S == type)
+		do_digit_io_switch(atc, state);
+
+	return;
+}
+
 static int ct_alsa_mix_switch_info(struct snd_kcontrol *kcontrol,
 				   struct snd_ctl_elem_info *uinfo)
 {
@@ -498,35 +535,7 @@ static int ct_alsa_mix_switch_put(struct snd_kcontrol *kcontrol,
 		return 0;
 
 	set_switch_state(mixer, type, state);
-	/* Do changes in mixer. */
-	if ((SWH_CAPTURE_START <= type) && (SWH_CAPTURE_END >= type)) {
-		if (state) {
-			ct_mixer_recording_select(mixer,
-						  get_amixer_index(type));
-		} else {
-			ct_mixer_recording_unselect(mixer,
-						    get_amixer_index(type));
-		}
-	}
-	/* Do changes out of mixer. */
-	if (state && (MIXER_LINEIN_C_S == type || MIXER_MIC_C_S == type))
-		do_line_mic_switch(atc, type);
-	else if (MIXER_WAVEF_P_S == type)
-		atc->line_front_unmute(atc, state);
-	else if (MIXER_WAVES_P_S == type)
-		atc->line_surround_unmute(atc, state);
-	else if (MIXER_WAVEC_P_S == type)
-		atc->line_clfe_unmute(atc, state);
-	else if (MIXER_WAVER_P_S == type)
-		atc->line_rear_unmute(atc, state);
-	else if (MIXER_LINEIN_P_S == type)
-		atc->line_in_unmute(atc, state);
-	else if (MIXER_SPDIFO_P_S == type)
-		atc->spdif_out_unmute(atc, state);
-	else if (MIXER_SPDIFI_P_S == type)
-		atc->spdif_in_unmute(atc, state);
-	else if (MIXER_DIGITAL_IO_S == type)
-		do_digit_io_switch(atc, state);
+	do_switch(atc, type, state);
 
 	return 1;
 }
@@ -1039,6 +1048,28 @@ mixer_set_input_right(struct ct_mixer *mixer,
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int mixer_resume(struct ct_mixer *mixer)
+{
+	int i, state;
+	struct amixer *amixer;
+
+	/* resume topology and volume gain. */
+	for (i = 0; i < NUM_CT_AMIXERS*CHN_NUM; i++) {
+		amixer = mixer->amixers[i];
+		amixer->ops->commit_write(amixer);
+	}
+
+	/* resume switch state. */
+	for (i = SWH_MIXER_START; i <= SWH_MIXER_END; i++) {
+		state = get_switch_state(mixer, i);
+		do_switch(mixer->atc, i, state);
+	}
+
+	return 0;
+}
+#endif
+
 int ct_mixer_destroy(struct ct_mixer *mixer)
 {
 	struct sum_mgr *sum_mgr = (struct sum_mgr *)mixer->atc->rsc_mgrs[SUM];
@@ -1087,6 +1118,9 @@ int ct_mixer_create(struct ct_atc *atc, struct ct_mixer **rmixer)
 	mixer->get_output_ports = mixer_get_output_ports;
 	mixer->set_input_left = mixer_set_input_left;
 	mixer->set_input_right = mixer_set_input_right;
+#ifdef CONFIG_PM
+	mixer->resume = mixer_resume;
+#endif
 
 	/* Allocate chip resources for mixer obj */
 	err = ct_mixer_get_resources(mixer);
diff --git a/sound/pci/ctxfi/ctmixer.h b/sound/pci/ctxfi/ctmixer.h
index e2d96ebde74..b009e989e77 100644
--- a/sound/pci/ctxfi/ctmixer.h
+++ b/sound/pci/ctxfi/ctmixer.h
@@ -56,6 +56,9 @@ struct ct_mixer {
 			      enum MIXER_PORT_T type, struct rsc *rsc);
 	int (*set_input_right)(struct ct_mixer *mixer,
 			       enum MIXER_PORT_T type, struct rsc *rsc);
+#ifdef CONFIG_PM
+	int (*resume)(struct ct_mixer *mixer);
+#endif
 };
 
 int ct_alsa_mix_create(struct ct_atc *atc,
diff --git a/sound/pci/ctxfi/ctpcm.c b/sound/pci/ctxfi/ctpcm.c
index 9e5c0c4da72..60ea23180ac 100644
--- a/sound/pci/ctxfi/ctpcm.c
+++ b/sound/pci/ctxfi/ctpcm.c
@@ -422,5 +422,9 @@ int ct_alsa_pcm_create(struct ct_atc *atc,
 	snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV_SG,
 			snd_dma_pci_data(atc->pci), 128*1024, 128*1024);
 
+#ifdef CONFIG_PM
+	atc->pcms[device] = pcm;
+#endif
+
 	return 0;
 }
diff --git a/sound/pci/ctxfi/xfi.c b/sound/pci/ctxfi/xfi.c
index 2d3dd89af15..76541748e7b 100644
--- a/sound/pci/ctxfi/xfi.c
+++ b/sound/pci/ctxfi/xfi.c
@@ -121,11 +121,33 @@ static void __devexit ct_card_remove(struct pci_dev *pci)
 	pci_set_drvdata(pci, NULL);
 }
 
+#ifdef CONFIG_PM
+static int ct_card_suspend(struct pci_dev *pci, pm_message_t state)
+{
+	struct snd_card *card = pci_get_drvdata(pci);
+	struct ct_atc *atc = card->private_data;
+
+	return atc->suspend(atc, state);
+}
+
+static int ct_card_resume(struct pci_dev *pci)
+{
+	struct snd_card *card = pci_get_drvdata(pci);
+	struct ct_atc *atc = card->private_data;
+
+	return atc->resume(atc);
+}
+#endif
+
 static struct pci_driver ct_driver = {
 	.name = "SB-XFi",
 	.id_table = ct_pci_dev_ids,
 	.probe = ct_card_probe,
 	.remove = __devexit_p(ct_card_remove),
+#ifdef CONFIG_PM
+	.suspend = ct_card_suspend,
+	.resume = ct_card_resume,
+#endif
 };
 
 static int __init ct_card_init(void)
diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig
index c710150d506..04438f1d682 100644
--- a/sound/pci/hda/Kconfig
+++ b/sound/pci/hda/Kconfig
@@ -2,7 +2,6 @@ menuconfig SND_HDA_INTEL
 	tristate "Intel HD Audio"
 	select SND_PCM
 	select SND_VMASTER
-	select SND_JACK if INPUT=y || INPUT=SND
 	help
 	  Say Y here to include support for Intel "High Definition
 	  Audio" (Azalia) and its compatible devices.
@@ -39,6 +38,14 @@ config SND_HDA_INPUT_BEEP
 	  Say Y here to build a digital beep interface for HD-audio
 	  driver. This interface is used to generate digital beeps.
 
+config SND_HDA_INPUT_JACK
+	bool "Support jack plugging notification via input layer"
+	depends on INPUT=y || INPUT=SND_HDA_INTEL
+	select SND_JACK
+	help
+	  Say Y here to enable the jack plugging notification via
+	  input layer.
+
 config SND_HDA_CODEC_REALTEK
 	bool "Build Realtek HD-audio codec support"
 	default y
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 562403a2348..462e2cedaa6 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -972,8 +972,6 @@ int /*__devinit*/ snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr
 			snd_hda_codec_read(codec, nid, 0,
 					   AC_VERB_GET_SUBSYSTEM_ID, 0);
 	}
-	if (bus->modelname)
-		codec->modelname = kstrdup(bus->modelname, GFP_KERNEL);
 
 	/* power-up all before initialization */
 	hda_set_power_state(codec,
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 4fcbe21829a..ac868c59f9e 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -349,7 +349,7 @@ static int conexant_mux_enum_put(struct snd_kcontrol *kcontrol,
 				     &spec->cur_mux[adc_idx]);
 }
 
-#ifdef CONFIG_SND_JACK
+#ifdef CONFIG_SND_HDA_INPUT_JACK
 static void conexant_free_jack_priv(struct snd_jack *jack)
 {
 	struct conexant_jack *jacks = jack->private_data;
@@ -463,7 +463,7 @@ static int conexant_init(struct hda_codec *codec)
 
 static void conexant_free(struct hda_codec *codec)
 {
-#ifdef CONFIG_SND_JACK
+#ifdef CONFIG_SND_HDA_INPUT_JACK
 	struct conexant_spec *spec = codec->spec;
 	if (spec->jacks.list) {
 		struct conexant_jack *jacks = spec->jacks.list;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index d22b2606801..33453319742 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -224,6 +224,7 @@ enum {
 	ALC883_ACER,
 	ALC883_ACER_ASPIRE,
 	ALC888_ACER_ASPIRE_4930G,
+	ALC888_ACER_ASPIRE_6530G,
 	ALC888_ACER_ASPIRE_8930G,
 	ALC883_MEDION,
 	ALC883_MEDION_MD2,
@@ -249,13 +250,6 @@ enum {
 	ALC883_MODEL_LAST,
 };
 
-/* styles of capture selection */
-enum {
-	CAPT_MUX = 0,	/* only mux based */
-	CAPT_MIX,	/* only mixer based */
-	CAPT_1MUX_MIX,	/* first mux and other mixers */
-};
-
 /* for GPIO Poll */
 #define GPIO_MASK	0x03
 
@@ -305,7 +299,6 @@ struct alc_spec {
 	hda_nid_t *adc_nids;
 	hda_nid_t *capsrc_nids;
 	hda_nid_t dig_in_nid;		/* digital-in NID; optional */
-	int capture_style;		/* capture style (CAPT_*) */
 
 	/* capture source */
 	unsigned int num_mux_defs;
@@ -419,12 +412,13 @@ static int alc_mux_enum_put(struct snd_kcontrol *kcontrol,
 	unsigned int mux_idx;
 	hda_nid_t nid = spec->capsrc_nids ?
 		spec->capsrc_nids[adc_idx] : spec->adc_nids[adc_idx];
+	unsigned int type;
 
 	mux_idx = adc_idx >= spec->num_mux_defs ? 0 : adc_idx;
 	imux = &spec->input_mux[mux_idx];
 
-	if (spec->capture_style &&
-	    !(spec->capture_style == CAPT_1MUX_MIX && !adc_idx)) {
+	type = (get_wcaps(codec, nid) & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
+	if (type == AC_WID_AUD_MIX) {
 		/* Matrix-mixer style (e.g. ALC882) */
 		unsigned int *cur_val = &spec->cur_mux[adc_idx];
 		unsigned int i, idx;
@@ -970,7 +964,7 @@ static void alc_automute_pin(struct hda_codec *codec)
 	}
 }
 
-#if 0 /* it's broken in some acses -- temporarily disabled */
+#if 0 /* it's broken in some cases -- temporarily disabled */
 static void alc_mic_automute(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
@@ -1170,7 +1164,7 @@ static int alc_subsystem_id(struct hda_codec *codec,
 
 	/* invalid SSID, check the special NID pin defcfg instead */
 	/*
-	 * 31~30	: port conetcivity
+	 * 31~30	: port connectivity
 	 * 29~21	: reserve
 	 * 20		: PCBEEP input
 	 * 19~16	: Check sum (15:1)
@@ -1471,6 +1465,25 @@ static struct hda_verb alc888_acer_aspire_4930g_verbs[] = {
 };
 
 /*
+ * ALC888 Acer Aspire 6530G model
+ */
+
+static struct hda_verb alc888_acer_aspire_6530g_verbs[] = {
+/* Bias voltage on for external mic port */
+	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN | PIN_VREF80},
+/* Enable unsolicited event for HP jack */
+	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+/* Enable speaker output */
+	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+/* Enable headphone output */
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | PIN_HP},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+	{ }
+};
+
+/*
  * ALC889 Acer Aspire 8930G model
  */
 
@@ -1544,6 +1557,25 @@ static struct hda_input_mux alc888_2_capture_sources[2] = {
 	}
 };
 
+static struct hda_input_mux alc888_acer_aspire_6530_sources[2] = {
+	/* Interal mic only available on one ADC */
+	{
+		.num_items = 3,
+		.items = {
+			{ "Ext Mic", 0x0 },
+			{ "CD", 0x4 },
+			{ "Int Mic", 0xb },
+		},
+	},
+	{
+		.num_items = 2,
+		.items = {
+			{ "Ext Mic", 0x0 },
+			{ "CD", 0x4 },
+		},
+	}
+};
+
 static struct hda_input_mux alc889_capture_sources[3] = {
 	/* Digital mic only available on first "ADC" */
 	{
@@ -6347,7 +6379,7 @@ static struct hda_channel_mode alc882_sixstack_modes[2] = {
 };
 
 /*
- * macbook pro ALC885 can switch LineIn to LineOut without loosing Mic
+ * macbook pro ALC885 can switch LineIn to LineOut without losing Mic
  */
 
 /*
@@ -7047,7 +7079,7 @@ static struct hda_verb alc882_auto_init_verbs[] = {
 #define alc882_loopbacks	alc880_loopbacks
 #endif
 
-/* pcm configuration: identiacal with ALC880 */
+/* pcm configuration: identical with ALC880 */
 #define alc882_pcm_analog_playback	alc880_pcm_analog_playback
 #define alc882_pcm_analog_capture	alc880_pcm_analog_capture
 #define alc882_pcm_digital_playback	alc880_pcm_digital_playback
@@ -7518,7 +7550,6 @@ static int patch_alc882(struct hda_codec *codec)
 	spec->stream_digital_playback = &alc882_pcm_digital_playback;
 	spec->stream_digital_capture = &alc882_pcm_digital_capture;
 
-	spec->capture_style = CAPT_MIX; /* matrix-style capture */
 	if (!spec->adc_nids && spec->input_mux) {
 		/* check whether NID 0x07 is valid */
 		unsigned int wcap = get_wcaps(codec, 0x07);
@@ -8068,7 +8099,7 @@ static struct snd_kcontrol_new alc883_fivestack_mixer[] = {
 	{ } /* end */
 };
 
-static struct snd_kcontrol_new alc883_tagra_mixer[] = {
+static struct snd_kcontrol_new alc883_targa_mixer[] = {
 	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Headphone Playback Switch", 0x14, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Front Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
@@ -8088,7 +8119,7 @@ static struct snd_kcontrol_new alc883_tagra_mixer[] = {
 	{ } /* end */
 };
 
-static struct snd_kcontrol_new alc883_tagra_2ch_mixer[] = {
+static struct snd_kcontrol_new alc883_targa_2ch_mixer[] = {
 	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Headphone Playback Switch", 0x14, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Front Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
@@ -8153,6 +8184,19 @@ static struct snd_kcontrol_new alc883_acer_aspire_mixer[] = {
 	{ } /* end */
 };
 
+static struct snd_kcontrol_new alc888_acer_aspire_6530_mixer[] = {
+	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
+	HDA_CODEC_VOLUME("LFE Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("LFE Playback Switch", 0x0f, 2, HDA_INPUT),
+	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
+	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
+	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+	{ } /* end */
+};
+
 static struct snd_kcontrol_new alc888_lenovo_sky_mixer[] = {
 	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
 	HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
@@ -8417,7 +8461,7 @@ static struct hda_verb alc883_2ch_fujitsu_pi2515_verbs[] = {
 	{ } /* end */
 };
 
-static struct hda_verb alc883_tagra_verbs[] = {
+static struct hda_verb alc883_targa_verbs[] = {
 	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
 	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
 
@@ -8626,8 +8670,8 @@ static void alc883_medion_md2_init_hook(struct hda_codec *codec)
 }
 
 /* toggle speaker-output according to the hp-jack state */
-#define alc883_tagra_init_hook		alc882_targa_init_hook
-#define alc883_tagra_unsol_event	alc882_targa_unsol_event
+#define alc883_targa_init_hook		alc882_targa_init_hook
+#define alc883_targa_unsol_event	alc882_targa_unsol_event
 
 static void alc883_clevo_m720_mic_automute(struct hda_codec *codec)
 {
@@ -8957,7 +9001,7 @@ static void alc889A_mb31_unsol_event(struct hda_codec *codec, unsigned int res)
 #define alc883_loopbacks	alc880_loopbacks
 #endif
 
-/* pcm configuration: identiacal with ALC880 */
+/* pcm configuration: identical with ALC880 */
 #define alc883_pcm_analog_playback	alc880_pcm_analog_playback
 #define alc883_pcm_analog_capture	alc880_pcm_analog_capture
 #define alc883_pcm_analog_alt_capture	alc880_pcm_analog_alt_capture
@@ -8978,6 +9022,7 @@ static const char *alc883_models[ALC883_MODEL_LAST] = {
 	[ALC883_ACER]		= "acer",
 	[ALC883_ACER_ASPIRE]	= "acer-aspire",
 	[ALC888_ACER_ASPIRE_4930G]	= "acer-aspire-4930g",
+	[ALC888_ACER_ASPIRE_6530G]	= "acer-aspire-6530g",
 	[ALC888_ACER_ASPIRE_8930G]	= "acer-aspire-8930g",
 	[ALC883_MEDION]		= "medion",
 	[ALC883_MEDION_MD2]	= "medion-md2",
@@ -9021,7 +9066,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1025, 0x015e, "Acer Aspire 6930G",
 		ALC888_ACER_ASPIRE_4930G),
 	SND_PCI_QUIRK(0x1025, 0x0166, "Acer Aspire 6530G",
-		ALC888_ACER_ASPIRE_4930G),
+		ALC888_ACER_ASPIRE_6530G),
 	/* default Acer -- disabled as it causes more problems.
 	 *    model=auto should work fine now
 	 */
@@ -9069,6 +9114,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1462, 0x7267, "MSI", ALC883_3ST_6ch_DIG),
 	SND_PCI_QUIRK(0x1462, 0x7280, "MSI", ALC883_6ST_DIG),
 	SND_PCI_QUIRK(0x1462, 0x7327, "MSI", ALC883_6ST_DIG),
+	SND_PCI_QUIRK(0x1462, 0x7350, "MSI", ALC883_6ST_DIG),
 	SND_PCI_QUIRK(0x1462, 0xa422, "MSI", ALC883_TARGA_2ch_DIG),
 	SND_PCI_QUIRK(0x147b, 0x1083, "Abit IP35-PRO", ALC883_6ST_DIG),
 	SND_PCI_QUIRK(0x1558, 0x0721, "Clevo laptop M720R", ALC883_CLEVO_M720),
@@ -9165,8 +9211,8 @@ static struct alc_config_preset alc883_presets[] = {
 		.input_mux = &alc883_capture_source,
 	},
 	[ALC883_TARGA_DIG] = {
-		.mixers = { alc883_tagra_mixer, alc883_chmode_mixer },
-		.init_verbs = { alc883_init_verbs, alc883_tagra_verbs},
+		.mixers = { alc883_targa_mixer, alc883_chmode_mixer },
+		.init_verbs = { alc883_init_verbs, alc883_targa_verbs},
 		.num_dacs = ARRAY_SIZE(alc883_dac_nids),
 		.dac_nids = alc883_dac_nids,
 		.dig_out_nid = ALC883_DIGOUT_NID,
@@ -9174,12 +9220,12 @@ static struct alc_config_preset alc883_presets[] = {
 		.channel_mode = alc883_3ST_6ch_modes,
 		.need_dac_fix = 1,
 		.input_mux = &alc883_capture_source,
-		.unsol_event = alc883_tagra_unsol_event,
-		.init_hook = alc883_tagra_init_hook,
+		.unsol_event = alc883_targa_unsol_event,
+		.init_hook = alc883_targa_init_hook,
 	},
 	[ALC883_TARGA_2ch_DIG] = {
-		.mixers = { alc883_tagra_2ch_mixer},
-		.init_verbs = { alc883_init_verbs, alc883_tagra_verbs},
+		.mixers = { alc883_targa_2ch_mixer},
+		.init_verbs = { alc883_init_verbs, alc883_targa_verbs},
 		.num_dacs = ARRAY_SIZE(alc883_dac_nids),
 		.dac_nids = alc883_dac_nids,
 		.adc_nids = alc883_adc_nids_alt,
@@ -9188,13 +9234,13 @@ static struct alc_config_preset alc883_presets[] = {
 		.num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
 		.channel_mode = alc883_3ST_2ch_modes,
 		.input_mux = &alc883_capture_source,
-		.unsol_event = alc883_tagra_unsol_event,
-		.init_hook = alc883_tagra_init_hook,
+		.unsol_event = alc883_targa_unsol_event,
+		.init_hook = alc883_targa_init_hook,
 	},
 	[ALC883_TARGA_8ch_DIG] = {
 		.mixers = { alc883_base_mixer, alc883_chmode_mixer },
 		.init_verbs = { alc883_init_verbs, alc880_gpio3_init_verbs,
-				alc883_tagra_verbs },
+				alc883_targa_verbs },
 		.num_dacs = ARRAY_SIZE(alc883_dac_nids),
 		.dac_nids = alc883_dac_nids,
 		.num_adc_nids = ARRAY_SIZE(alc883_adc_nids_rev),
@@ -9206,8 +9252,8 @@ static struct alc_config_preset alc883_presets[] = {
 		.channel_mode = alc883_4ST_8ch_modes,
 		.need_dac_fix = 1,
 		.input_mux = &alc883_capture_source,
-		.unsol_event = alc883_tagra_unsol_event,
-		.init_hook = alc883_tagra_init_hook,
+		.unsol_event = alc883_targa_unsol_event,
+		.init_hook = alc883_targa_init_hook,
 	},
 	[ALC883_ACER] = {
 		.mixers = { alc883_base_mixer },
@@ -9255,6 +9301,24 @@ static struct alc_config_preset alc883_presets[] = {
 		.unsol_event = alc_automute_amp_unsol_event,
 		.init_hook = alc888_acer_aspire_4930g_init_hook,
 	},
+	[ALC888_ACER_ASPIRE_6530G] = {
+		.mixers = { alc888_acer_aspire_6530_mixer },
+		.init_verbs = { alc883_init_verbs, alc880_gpio1_init_verbs,
+				alc888_acer_aspire_6530g_verbs },
+		.num_dacs = ARRAY_SIZE(alc883_dac_nids),
+		.dac_nids = alc883_dac_nids,
+		.num_adc_nids = ARRAY_SIZE(alc883_adc_nids_rev),
+		.adc_nids = alc883_adc_nids_rev,
+		.capsrc_nids = alc883_capsrc_nids_rev,
+		.dig_out_nid = ALC883_DIGOUT_NID,
+		.num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
+		.channel_mode = alc883_3ST_2ch_modes,
+		.num_mux_defs =
+			ARRAY_SIZE(alc888_2_capture_sources),
+		.input_mux = alc888_acer_aspire_6530_sources,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc888_acer_aspire_4930g_init_hook,
+	},
 	[ALC888_ACER_ASPIRE_8930G] = {
 		.mixers = { alc888_base_mixer,
 				alc883_chmode_mixer },
@@ -9361,7 +9425,7 @@ static struct alc_config_preset alc883_presets[] = {
 		.init_hook = alc888_lenovo_ms7195_front_automute,
 	},
 	[ALC883_HAIER_W66] = {
-		.mixers = { alc883_tagra_2ch_mixer},
+		.mixers = { alc883_targa_2ch_mixer},
 		.init_verbs = { alc883_init_verbs, alc883_haier_w66_verbs},
 		.num_dacs = ARRAY_SIZE(alc883_dac_nids),
 		.dac_nids = alc883_dac_nids,
@@ -9709,7 +9773,6 @@ static int patch_alc883(struct hda_codec *codec)
 		}
 		if (!spec->capsrc_nids)
 			spec->capsrc_nids = alc883_capsrc_nids;
-		spec->capture_style = CAPT_MIX; /* matrix-style capture */
 		spec->init_amp = ALC_INIT_DEFAULT; /* always initialize */
 		break;
 	case 0x10ec0889:
@@ -9719,8 +9782,6 @@ static int patch_alc883(struct hda_codec *codec)
 		}
 		if (!spec->capsrc_nids)
 			spec->capsrc_nids = alc889_capsrc_nids;
-		spec->capture_style = CAPT_1MUX_MIX; /* 1mux/Nmix-style
-							capture */
 		break;
 	default:
 		if (!spec->num_adc_nids) {
@@ -9729,7 +9790,6 @@ static int patch_alc883(struct hda_codec *codec)
 		}
 		if (!spec->capsrc_nids)
 			spec->capsrc_nids = alc883_capsrc_nids;
-		spec->capture_style = CAPT_MIX; /* matrix-style capture */
 		break;
 	}
 
@@ -10841,9 +10901,27 @@ static int alc262_auto_create_multi_out_ctls(struct alc_spec *spec,
 	return 0;
 }
 
-/* identical with ALC880 */
-#define alc262_auto_create_analog_input_ctls \
-	alc880_auto_create_analog_input_ctls
+static int alc262_auto_create_analog_input_ctls(struct alc_spec *spec,
+						const struct auto_pin_cfg *cfg)
+{
+	int err;
+
+	err = alc880_auto_create_analog_input_ctls(spec, cfg);
+	if (err < 0)
+		return err;
+	/* digital-mic input pin is excluded in alc880_auto_create..()
+	 * because it's under 0x18
+	 */
+	if (cfg->input_pins[AUTO_PIN_MIC] == 0x12 ||
+	    cfg->input_pins[AUTO_PIN_FRONT_MIC] == 0x12) {
+		struct hda_input_mux *imux = &spec->private_imux[0];
+		imux->items[imux->num_items].label = "Int Mic";
+		imux->items[imux->num_items].index = 0x09;
+		imux->num_items++;
+	}
+	return 0;
+}
+
 
 /*
  * generic initialization of ADC, input mixers and output mixers
@@ -11131,7 +11209,7 @@ static struct hda_verb alc262_toshiba_rx1_unsol_verbs[] = {
 #define alc262_loopbacks	alc880_loopbacks
 #endif
 
-/* pcm configuration: identiacal with ALC880 */
+/* pcm configuration: identical with ALC880 */
 #define alc262_pcm_analog_playback	alc880_pcm_analog_playback
 #define alc262_pcm_analog_capture	alc880_pcm_analog_capture
 #define alc262_pcm_digital_playback	alc880_pcm_digital_playback
@@ -11260,6 +11338,7 @@ static struct snd_pci_quirk alc262_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x104d, 0x8203, "Sony UX-90", ALC262_HIPPO),
 	SND_PCI_QUIRK(0x104d, 0x820f, "Sony ASSAMD", ALC262_SONY_ASSAMD),
 	SND_PCI_QUIRK(0x104d, 0x9016, "Sony VAIO", ALC262_AUTO), /* dig-only */
+	SND_PCI_QUIRK(0x104d, 0x9025, "Sony VAIO Z21MN", ALC262_TOSHIBA_S06),
 	SND_PCI_QUIRK_MASK(0x104d, 0xff00, 0x9000, "Sony VAIO",
 			   ALC262_SONY_ASSAMD),
 	SND_PCI_QUIRK(0x1179, 0x0001, "Toshiba dynabook SS RX1",
@@ -11467,6 +11546,7 @@ static struct alc_config_preset alc262_presets[] = {
 		.capsrc_nids = alc262_dmic_capsrc_nids,
 		.dac_nids = alc262_dac_nids,
 		.adc_nids = alc262_dmic_adc_nids, /* ADC0 */
+		.num_adc_nids = 1, /* single ADC */
 		.dig_out_nid = ALC262_DIGOUT_NID,
 		.num_channel_mode = ARRAY_SIZE(alc262_modes),
 		.channel_mode = alc262_modes,
@@ -11568,21 +11648,36 @@ static int patch_alc262(struct hda_codec *codec)
 	spec->stream_digital_playback = &alc262_pcm_digital_playback;
 	spec->stream_digital_capture = &alc262_pcm_digital_capture;
 
-	spec->capture_style = CAPT_MIX;
 	if (!spec->adc_nids && spec->input_mux) {
-		/* check whether NID 0x07 is valid */
-		unsigned int wcap = get_wcaps(codec, 0x07);
-
-		/* get type */
-		wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
-		if (wcap != AC_WID_AUD_IN) {
-			spec->adc_nids = alc262_adc_nids_alt;
-			spec->num_adc_nids = ARRAY_SIZE(alc262_adc_nids_alt);
-			spec->capsrc_nids = alc262_capsrc_nids_alt;
+		int i;
+		/* check whether the digital-mic has to be supported */
+		for (i = 0; i < spec->input_mux->num_items; i++) {
+			if (spec->input_mux->items[i].index >= 9)
+				break;
+		}
+		if (i < spec->input_mux->num_items) {
+			/* use only ADC0 */
+			spec->adc_nids = alc262_dmic_adc_nids;
+			spec->num_adc_nids = 1;
+			spec->capsrc_nids = alc262_dmic_capsrc_nids;
 		} else {
-			spec->adc_nids = alc262_adc_nids;
-			spec->num_adc_nids = ARRAY_SIZE(alc262_adc_nids);
-			spec->capsrc_nids = alc262_capsrc_nids;
+			/* all analog inputs */
+			/* check whether NID 0x07 is valid */
+			unsigned int wcap = get_wcaps(codec, 0x07);
+
+			/* get type */
+			wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
+			if (wcap != AC_WID_AUD_IN) {
+				spec->adc_nids = alc262_adc_nids_alt;
+				spec->num_adc_nids =
+					ARRAY_SIZE(alc262_adc_nids_alt);
+				spec->capsrc_nids = alc262_capsrc_nids_alt;
+			} else {
+				spec->adc_nids = alc262_adc_nids;
+				spec->num_adc_nids =
+					ARRAY_SIZE(alc262_adc_nids);
+				spec->capsrc_nids = alc262_capsrc_nids;
+			}
 		}
 	}
 	if (!spec->cap_mixer && !spec->no_analog)
@@ -12286,7 +12381,7 @@ static void alc268_auto_init_mono_speaker_out(struct hda_codec *codec)
 			    AC_VERB_SET_AMP_GAIN_MUTE, dac_vol2);
 }
 
-/* pcm configuration: identiacal with ALC880 */
+/* pcm configuration: identical with ALC880 */
 #define alc268_pcm_analog_playback	alc880_pcm_analog_playback
 #define alc268_pcm_analog_capture	alc880_pcm_analog_capture
 #define alc268_pcm_analog_alt_capture	alc880_pcm_analog_alt_capture
@@ -13172,32 +13267,14 @@ static int alc269_auto_create_multi_out_ctls(struct alc_spec *spec,
 	return 0;
 }
 
-static int alc269_auto_create_analog_input_ctls(struct alc_spec *spec,
-						const struct auto_pin_cfg *cfg)
-{
-	int err;
-
-	err = alc880_auto_create_analog_input_ctls(spec, cfg);
-	if (err < 0)
-		return err;
-	/* digital-mic input pin is excluded in alc880_auto_create..()
-	 * because it's under 0x18
-	 */
-	if (cfg->input_pins[AUTO_PIN_MIC] == 0x12 ||
-	    cfg->input_pins[AUTO_PIN_FRONT_MIC] == 0x12) {
-		struct hda_input_mux *imux = &spec->private_imux[0];
-		imux->items[imux->num_items].label = "Int Mic";
-		imux->items[imux->num_items].index = 0x05;
-		imux->num_items++;
-	}
-	return 0;
-}
+#define alc269_auto_create_analog_input_ctls \
+	alc262_auto_create_analog_input_ctls
 
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 #define alc269_loopbacks	alc880_loopbacks
 #endif
 
-/* pcm configuration: identiacal with ALC880 */
+/* pcm configuration: identical with ALC880 */
 #define alc269_pcm_analog_playback	alc880_pcm_analog_playback
 #define alc269_pcm_analog_capture	alc880_pcm_analog_capture
 #define alc269_pcm_digital_playback	alc880_pcm_digital_playback
@@ -14059,7 +14136,7 @@ static void alc861_toshiba_unsol_event(struct hda_codec *codec,
 		alc861_toshiba_automute(codec);
 }
 
-/* pcm configuration: identiacal with ALC880 */
+/* pcm configuration: identical with ALC880 */
 #define alc861_pcm_analog_playback	alc880_pcm_analog_playback
 #define alc861_pcm_analog_capture	alc880_pcm_analog_capture
 #define alc861_pcm_digital_playback	alc880_pcm_digital_playback
@@ -14582,7 +14659,7 @@ static hda_nid_t alc861vd_dac_nids[4] = {
 
 /* dac_nids for ALC660vd are in a different order - according to
  * Realtek's driver.
- * This should probably tesult in a different mixer for 6stack models
+ * This should probably result in a different mixer for 6stack models
  * of ALC660vd codecs, but for now there is only 3stack mixer
  * - and it is the same as in 861vd.
  * adc_nids in ALC660vd are (is) the same as in 861vd
@@ -15027,7 +15104,7 @@ static void alc861vd_dallas_init_hook(struct hda_codec *codec)
 #define alc861vd_loopbacks	alc880_loopbacks
 #endif
 
-/* pcm configuration: identiacal with ALC880 */
+/* pcm configuration: identical with ALC880 */
 #define alc861vd_pcm_analog_playback	alc880_pcm_analog_playback
 #define alc861vd_pcm_analog_capture	alc880_pcm_analog_capture
 #define alc861vd_pcm_digital_playback	alc880_pcm_digital_playback
@@ -15206,7 +15283,7 @@ static void alc861vd_auto_init_hp_out(struct hda_codec *codec)
 	hda_nid_t pin;
 
 	pin = spec->autocfg.hp_pins[0];
-	if (pin) /* connect to front and  use dac 0 */
+	if (pin) /* connect to front and use dac 0 */
 		alc861vd_auto_set_output_and_unmute(codec, pin, PIN_HP, 0);
 	pin = spec->autocfg.speaker_pins[0];
 	if (pin)
@@ -15482,7 +15559,6 @@ static int patch_alc861vd(struct hda_codec *codec)
 	spec->adc_nids = alc861vd_adc_nids;
 	spec->num_adc_nids = ARRAY_SIZE(alc861vd_adc_nids);
 	spec->capsrc_nids = alc861vd_capsrc_nids;
-	spec->capture_style = CAPT_MIX;
 
 	set_capture_mixer(spec);
 	set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
@@ -16669,7 +16745,7 @@ static struct snd_kcontrol_new alc272_nc10_mixer[] = {
 #endif
 
 
-/* pcm configuration: identiacal with ALC880 */
+/* pcm configuration: identical with ALC880 */
 #define alc662_pcm_analog_playback	alc880_pcm_analog_playback
 #define alc662_pcm_analog_capture	alc880_pcm_analog_capture
 #define alc662_pcm_digital_playback	alc880_pcm_digital_playback
@@ -17402,7 +17478,6 @@ static int patch_alc662(struct hda_codec *codec)
 	spec->adc_nids = alc662_adc_nids;
 	spec->num_adc_nids = ARRAY_SIZE(alc662_adc_nids);
 	spec->capsrc_nids = alc662_capsrc_nids;
-	spec->capture_style = CAPT_MIX;
 
 	if (!spec->cap_mixer)
 		set_capture_mixer(spec);
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 93e47c96a38..14f3c3e0f62 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -639,7 +639,7 @@ static int stac92xx_smux_enum_put(struct snd_kcontrol *kcontrol,
 static unsigned int stac92xx_vref_set(struct hda_codec *codec,
 					hda_nid_t nid, unsigned int new_vref)
 {
-	unsigned int error;
+	int error;
 	unsigned int pincfg;
 	pincfg = snd_hda_codec_read(codec, nid, 0,
 				AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
@@ -2703,7 +2703,7 @@ static int stac92xx_dc_bias_put(struct snd_kcontrol *kcontrol,
 {
 	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
 	unsigned int new_vref = 0;
-	unsigned int error;
+	int error;
 	hda_nid_t nid = kcontrol->private_value;
 
 	if (ucontrol->value.enumerated.item[0] == 0)
@@ -4035,7 +4035,7 @@ static void stac_gpio_set(struct hda_codec *codec, unsigned int mask,
 			   AC_VERB_SET_GPIO_DATA, gpiostate); /* sync */
 }
 
-#ifdef CONFIG_SND_JACK
+#ifdef CONFIG_SND_HDA_INPUT_JACK
 static void stac92xx_free_jack_priv(struct snd_jack *jack)
 {
 	struct sigmatel_jack *jacks = jack->private_data;
@@ -4047,7 +4047,7 @@ static void stac92xx_free_jack_priv(struct snd_jack *jack)
 static int stac92xx_add_jack(struct hda_codec *codec,
 		hda_nid_t nid, int type)
 {
-#ifdef CONFIG_SND_JACK
+#ifdef CONFIG_SND_HDA_INPUT_JACK
 	struct sigmatel_spec *spec = codec->spec;
 	struct sigmatel_jack *jack;
 	int def_conf = snd_hda_codec_get_pincfg(codec, nid);
@@ -4336,7 +4336,7 @@ static int stac92xx_init(struct hda_codec *codec)
 
 static void stac92xx_free_jacks(struct hda_codec *codec)
 {
-#ifdef CONFIG_SND_JACK
+#ifdef CONFIG_SND_HDA_INPUT_JACK
 	/* free jack instances manually when clearing/reconfiguring */
 	struct sigmatel_spec *spec = codec->spec;
 	if (!codec->bus->shutdown && spec->jacks.list) {
diff --git a/sound/pci/lx6464es/lx6464es.c b/sound/pci/lx6464es/lx6464es.c
index ccf1b38c88e..18da2ef04d0 100644
--- a/sound/pci/lx6464es/lx6464es.c
+++ b/sound/pci/lx6464es/lx6464es.c
@@ -988,7 +988,7 @@ static int __devinit snd_lx6464es_create(struct snd_card *card,
 	pci_set_master(pci);
 
 	/* check if we can restrict PCI DMA transfers to 32 bits */
-	err = pci_set_dma_mask(pci, DMA_32BIT_MASK);
+	err = pci_set_dma_mask(pci, DMA_BIT_MASK(32));
 	if (err < 0) {
 		snd_printk(KERN_ERR "architecture does not support "
 			   "32bit PCI busmaster DMA\n");
diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c
index 1ef58c51c21..949fcaf6b70 100644
--- a/sound/pci/via82xx.c
+++ b/sound/pci/via82xx.c
@@ -85,6 +85,7 @@ static int joystick;
 static int ac97_clock = 48000;
 static char *ac97_quirk;
 static int dxs_support;
+static int nodelay;
 
 module_param(index, int, 0444);
 MODULE_PARM_DESC(index, "Index value for VIA 82xx bridge.");
@@ -102,6 +103,8 @@ module_param(ac97_quirk, charp, 0444);
 MODULE_PARM_DESC(ac97_quirk, "AC'97 workaround for strange hardware.");
 module_param(dxs_support, int, 0444);
 MODULE_PARM_DESC(dxs_support, "Support for DXS channels (0 = auto, 1 = enable, 2 = disable, 3 = 48k only, 4 = no VRA, 5 = enable any sample rate)");
+module_param(nodelay, int, 0444);
+MODULE_PARM_DESC(nodelay, "Disable 500ms init delay");
 
 /* just for backward compatibility */
 static int enable;
@@ -549,7 +552,8 @@ static void snd_via82xx_codec_wait(struct snd_ac97 *ac97)
 	int err;
 	err = snd_via82xx_codec_ready(chip, ac97->num);
 	/* here we need to wait fairly for long time.. */
-	msleep(500);
+	if (!nodelay)
+		msleep(500);
 }
 
 static void snd_via82xx_codec_write(struct snd_ac97 *ac97,
diff --git a/sound/soc/blackfin/bf5xx-i2s.c b/sound/soc/blackfin/bf5xx-i2s.c
index 96482441967..af06904bab0 100644
--- a/sound/soc/blackfin/bf5xx-i2s.c
+++ b/sound/soc/blackfin/bf5xx-i2s.c
@@ -50,6 +50,7 @@ struct bf5xx_i2s_port {
 	u16 tcr2;
 	u16 rcr2;
 	int counter;
+	int configured;
 };
 
 static struct bf5xx_i2s_port bf5xx_i2s;
@@ -168,7 +169,7 @@ static int bf5xx_i2s_hw_params(struct snd_pcm_substream *substream,
 		break;
 	}
 
-	if (bf5xx_i2s.counter == 1) {
+	if (!bf5xx_i2s.configured) {
 		/*
 		 * TX and RX are not independent,they are enabled at the
 		 * same time, even if only one side is running. So, we
@@ -177,6 +178,7 @@ static int bf5xx_i2s_hw_params(struct snd_pcm_substream *substream,
 		 *
 		 * CPU DAI:slave mode.
 		 */
+		bf5xx_i2s.configured = 1;
 		ret = sport_config_rx(sport_handle, bf5xx_i2s.rcr1,
 				      bf5xx_i2s.rcr2, 0, 0);
 		if (ret) {
@@ -200,6 +202,9 @@ static void bf5xx_i2s_shutdown(struct snd_pcm_substream *substream,
 {
 	pr_debug("%s enter\n", __func__);
 	bf5xx_i2s.counter--;
+	/* No active stream, SPORT is allowed to be configured again. */
+	if (!bf5xx_i2s.counter)
+		bf5xx_i2s.configured = 0;
 }
 
 static int bf5xx_i2s_probe(struct platform_device *pdev,
@@ -244,8 +249,7 @@ static int bf5xx_i2s_suspend(struct snd_soc_dai *dai)
 	return 0;
 }
 
-static int bf5xx_i2s_resume(struct platform_device *pdev,
-			    struct snd_soc_dai *dai)
+static int bf5xx_i2s_resume(struct snd_soc_dai *dai)
 {
 	int ret;
 	struct sport_device *sport =
diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c
index d5be2b30cda..fefe1a57f31 100644
--- a/sound/soc/pxa/corgi.c
+++ b/sound/soc/pxa/corgi.c
@@ -320,38 +320,6 @@ static struct snd_soc_device corgi_snd_devdata = {
 	.codec_dev = &soc_codec_dev_wm8731,
 };
 
-/*
- * FIXME: This is a temporary bodge to avoid cross-tree merge issues.
- * New drivers should register the wm8731 I2C device in the machine
- * setup code (under arch/arm for ARM systems).
- */
-static int wm8731_i2c_register(void)
-{
-	struct i2c_board_info info;
-	struct i2c_adapter *adapter;
-	struct i2c_client *client;
-
-	memset(&info, 0, sizeof(struct i2c_board_info));
-	info.addr = 0x1b;
-	strlcpy(info.type, "wm8731", I2C_NAME_SIZE);
-
-	adapter = i2c_get_adapter(0);
-	if (!adapter) {
-		printk(KERN_ERR "can't get i2c adapter 0\n");
-		return -ENODEV;
-	}
-
-	client = i2c_new_device(adapter, &info);
-	i2c_put_adapter(adapter);
-	if (!client) {
-		printk(KERN_ERR "can't add i2c device at 0x%x\n",
-			(unsigned int)info.addr);
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
 static struct platform_device *corgi_snd_device;
 
 static int __init corgi_init(void)
@@ -362,10 +330,6 @@ static int __init corgi_init(void)
 	      machine_is_husky()))
 		return -ENODEV;
 
-	ret = wm8731_i2c_register();
-	if (ret != 0)
-		return ret;
-
 	corgi_snd_device = platform_device_alloc("soc-audio", -1);
 	if (!corgi_snd_device)
 		return -ENOMEM;
diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c
index a51058f6674..c5f36e0eab5 100644
--- a/sound/soc/pxa/poodle.c
+++ b/sound/soc/pxa/poodle.c
@@ -280,38 +280,6 @@ static struct snd_soc_card snd_soc_poodle = {
 	.num_links = 1,
 };
 
-/*
- * FIXME: This is a temporary bodge to avoid cross-tree merge issues.
- * New drivers should register the wm8731 I2C device in the machine
- * setup code (under arch/arm for ARM systems).
- */
-static int wm8731_i2c_register(void)
-{
-	struct i2c_board_info info;
-	struct i2c_adapter *adapter;
-	struct i2c_client *client;
-
-	memset(&info, 0, sizeof(struct i2c_board_info));
-	info.addr = 0x1b;
-	strlcpy(info.type, "wm8731", I2C_NAME_SIZE);
-
-	adapter = i2c_get_adapter(0);
-	if (!adapter) {
-		printk(KERN_ERR "can't get i2c adapter 0\n");
-		return -ENODEV;
-	}
-
-	client = i2c_new_device(adapter, &info);
-	i2c_put_adapter(adapter);
-	if (!client) {
-		printk(KERN_ERR "can't add i2c device at 0x%x\n",
-			(unsigned int)info.addr);
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
 /* poodle audio subsystem */
 static struct snd_soc_device poodle_snd_devdata = {
 	.card = &snd_soc_poodle,
@@ -327,10 +295,6 @@ static int __init poodle_init(void)
 	if (!machine_is_poodle())
 		return -ENODEV;
 
-	ret = wm8731_i2c_register();
-	if (ret != 0)
-		return ret;
-
 	locomo_gpio_set_dir(&poodle_locomo_device.dev,
 		POODLE_LOCOMO_GPIO_AMP_ON, 0);
 	/* should we mute HP at startup - burning power ?*/
diff --git a/sound/soc/txx9/txx9aclc.c b/sound/soc/txx9/txx9aclc.c
index fa336616152..938a58a5a24 100644
--- a/sound/soc/txx9/txx9aclc.c
+++ b/sound/soc/txx9/txx9aclc.c
@@ -297,9 +297,9 @@ static int txx9aclc_pcm_new(struct snd_card *card, struct snd_soc_dai *dai,
 static bool filter(struct dma_chan *chan, void *param)
 {
 	struct txx9aclc_dmadata *dmadata = param;
-	char devname[BUS_ID_SIZE + 2];
+	char devname[20 + 2]; /* FIXME: old BUS_ID_SIZE + 2 */
 
-	sprintf(devname, "%s.%d", dmadata->dma_res->name,
+	snprintf(devname, sizeof(devname), "%s.%d", dmadata->dma_res->name,
 		(int)dmadata->dma_res->start);
 	if (strcmp(dev_name(chan->device->dev), devname) == 0) {
 		chan->private = &dmadata->dma_slave;
diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c
index b1445134216..8f9b60c5d74 100644
--- a/sound/usb/caiaq/audio.c
+++ b/sound/usb/caiaq/audio.c
@@ -199,8 +199,9 @@ static int snd_usb_caiaq_pcm_prepare(struct snd_pcm_substream *substream)
 		dev->period_out_count[index] = BYTES_PER_SAMPLE + 1;
 		dev->audio_out_buf_pos[index] = BYTES_PER_SAMPLE + 1;
 	} else {
-		dev->period_in_count[index] = BYTES_PER_SAMPLE;
-		dev->audio_in_buf_pos[index] = BYTES_PER_SAMPLE;
+		int in_pos = (dev->spec.data_alignment == 2) ? 0 : 2;
+		dev->period_in_count[index] = BYTES_PER_SAMPLE + in_pos;
+		dev->audio_in_buf_pos[index] = BYTES_PER_SAMPLE + in_pos;
 	}
 
 	if (dev->streaming)
diff --git a/sound/usb/caiaq/device.c b/sound/usb/caiaq/device.c
index 22406245a98..0e5db719de2 100644
--- a/sound/usb/caiaq/device.c
+++ b/sound/usb/caiaq/device.c
@@ -35,7 +35,7 @@
 #include "input.h"
 
 MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
-MODULE_DESCRIPTION("caiaq USB audio, version 1.3.16");
+MODULE_DESCRIPTION("caiaq USB audio, version 1.3.17");
 MODULE_LICENSE("GPL");
 MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
 			 "{Native Instruments, RigKontrol3},"
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 0cbd5d6874e..36d7eef4991 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -157,10 +157,15 @@ uname_R := $(shell sh -c 'uname -r 2>/dev/null || echo not')
 uname_P := $(shell sh -c 'uname -p 2>/dev/null || echo not')
 uname_V := $(shell sh -c 'uname -v 2>/dev/null || echo not')
 
+# If we're on a 64-bit kernel, use -m64
+ifneq ($(patsubst %64,%,$(uname_M)),$(uname_M))
+  M64 := -m64
+endif
+
 # CFLAGS and LDFLAGS are for the users to override from the command line.
 
-CFLAGS = -ggdb3 -Wall -Werror -Wstrict-prototypes -Wmissing-declarations -Wmissing-prototypes -std=gnu99 -Wdeclaration-after-statement -O6
-LDFLAGS = -lpthread -lrt -lelf
+CFLAGS = $(M64) -ggdb3 -Wall -Wstrict-prototypes -Wmissing-declarations -Wmissing-prototypes -std=gnu99 -Wdeclaration-after-statement -Werror -O6
+LDFLAGS = -lpthread -lrt -lelf -lm
 ALL_CFLAGS = $(CFLAGS)
 ALL_LDFLAGS = $(LDFLAGS)
 STRIP ?= strip
@@ -285,6 +290,7 @@ LIB_FILE=libperf.a
 
 LIB_H += ../../include/linux/perf_counter.h
 LIB_H += perf.h
+LIB_H += types.h
 LIB_H += util/list.h
 LIB_H += util/rbtree.h
 LIB_H += util/levenshtein.h
diff --git a/tools/perf/builtin-annotate.c b/tools/perf/builtin-annotate.c
index b1ed5f766cb..7e58e3ad150 100644
--- a/tools/perf/builtin-annotate.c
+++ b/tools/perf/builtin-annotate.c
@@ -25,6 +25,10 @@
 #define SHOW_USER	2
 #define SHOW_HV		4
 
+#define MIN_GREEN		0.5
+#define MIN_RED		5.0
+
+
 static char		const *input_name = "perf.data";
 static char		*vmlinux = "vmlinux";
 
@@ -39,40 +43,42 @@ static int		dump_trace = 0;
 
 static int		verbose;
 
+static int		print_line;
+
 static unsigned long	page_size;
 static unsigned long	mmap_window = 32;
 
 struct ip_event {
 	struct perf_event_header header;
-	__u64 ip;
-	__u32 pid, tid;
+	u64 ip;
+	u32 pid, tid;
 };
 
 struct mmap_event {
 	struct perf_event_header header;
-	__u32 pid, tid;
-	__u64 start;
-	__u64 len;
-	__u64 pgoff;
+	u32 pid, tid;
+	u64 start;
+	u64 len;
+	u64 pgoff;
 	char filename[PATH_MAX];
 };
 
 struct comm_event {
 	struct perf_event_header header;
-	__u32 pid, tid;
+	u32 pid, tid;
 	char comm[16];
 };
 
 struct fork_event {
 	struct perf_event_header header;
-	__u32 pid, ppid;
+	u32 pid, ppid;
 };
 
 struct period_event {
 	struct perf_event_header header;
-	__u64 time;
-	__u64 id;
-	__u64 sample_period;
+	u64 time;
+	u64 id;
+	u64 sample_period;
 };
 
 typedef union event_union {
@@ -84,6 +90,13 @@ typedef union event_union {
 	struct period_event		period;
 } event_t;
 
+
+struct sym_ext {
+	struct rb_node	node;
+	double		percent;
+	char		*path;
+};
+
 static LIST_HEAD(dsos);
 static struct dso *kernel_dso;
 static struct dso *vdso;
@@ -145,7 +158,7 @@ static void dsos__fprintf(FILE *fp)
 		dso__fprintf(pos, fp);
 }
 
-static struct symbol *vdso__find_symbol(struct dso *dso, __u64 ip)
+static struct symbol *vdso__find_symbol(struct dso *dso, u64 ip)
 {
 	return dso__find_symbol(kernel_dso, ip);
 }
@@ -178,19 +191,19 @@ static int load_kernel(void)
 
 struct map {
 	struct list_head node;
-	__u64	 start;
-	__u64	 end;
-	__u64	 pgoff;
-	__u64	 (*map_ip)(struct map *, __u64);
+	u64	 start;
+	u64	 end;
+	u64	 pgoff;
+	u64	 (*map_ip)(struct map *, u64);
 	struct dso	 *dso;
 };
 
-static __u64 map__map_ip(struct map *map, __u64 ip)
+static u64 map__map_ip(struct map *map, u64 ip)
 {
 	return ip - map->start + map->pgoff;
 }
 
-static __u64 vdso__map_ip(struct map *map, __u64 ip)
+static u64 vdso__map_ip(struct map *map, u64 ip)
 {
 	return ip;
 }
@@ -373,7 +386,7 @@ static int thread__fork(struct thread *self, struct thread *parent)
 	return 0;
 }
 
-static struct map *thread__find_map(struct thread *self, __u64 ip)
+static struct map *thread__find_map(struct thread *self, u64 ip)
 {
 	struct map *pos;
 
@@ -414,7 +427,7 @@ struct hist_entry {
 	struct map	 *map;
 	struct dso	 *dso;
 	struct symbol	 *sym;
-	__u64	 ip;
+	u64	 ip;
 	char		 level;
 
 	uint32_t	 count;
@@ -519,7 +532,7 @@ sort__dso_print(FILE *fp, struct hist_entry *self)
 	if (self->dso)
 		return fprintf(fp, "%-25s", self->dso->name);
 
-	return fprintf(fp, "%016llx         ", (__u64)self->ip);
+	return fprintf(fp, "%016llx         ", (u64)self->ip);
 }
 
 static struct sort_entry sort_dso = {
@@ -533,7 +546,7 @@ static struct sort_entry sort_dso = {
 static int64_t
 sort__sym_cmp(struct hist_entry *left, struct hist_entry *right)
 {
-	__u64 ip_l, ip_r;
+	u64 ip_l, ip_r;
 
 	if (left->sym == right->sym)
 		return 0;
@@ -550,13 +563,13 @@ sort__sym_print(FILE *fp, struct hist_entry *self)
 	size_t ret = 0;
 
 	if (verbose)
-		ret += fprintf(fp, "%#018llx  ", (__u64)self->ip);
+		ret += fprintf(fp, "%#018llx  ", (u64)self->ip);
 
 	if (self->sym) {
 		ret += fprintf(fp, "[%c] %s",
 			self->dso == kernel_dso ? 'k' : '.', self->sym->name);
 	} else {
-		ret += fprintf(fp, "%#016llx", (__u64)self->ip);
+		ret += fprintf(fp, "%#016llx", (u64)self->ip);
 	}
 
 	return ret;
@@ -647,7 +660,7 @@ hist_entry__collapse(struct hist_entry *left, struct hist_entry *right)
 /*
  * collect histogram counts
  */
-static void hist_hit(struct hist_entry *he, __u64 ip)
+static void hist_hit(struct hist_entry *he, u64 ip)
 {
 	unsigned int sym_size, offset;
 	struct symbol *sym = he->sym;
@@ -676,7 +689,7 @@ static void hist_hit(struct hist_entry *he, __u64 ip)
 
 static int
 hist_entry__add(struct thread *thread, struct map *map, struct dso *dso,
-		struct symbol *sym, __u64 ip, char level)
+		struct symbol *sym, u64 ip, char level)
 {
 	struct rb_node **p = &hist.rb_node;
 	struct rb_node *parent = NULL;
@@ -848,7 +861,7 @@ process_overflow_event(event_t *event, unsigned long offset, unsigned long head)
 	int show = 0;
 	struct dso *dso = NULL;
 	struct thread *thread = threads__findnew(event->ip.pid);
-	__u64 ip = event->ip.ip;
+	u64 ip = event->ip.ip;
 	struct map *map = NULL;
 
 	dprintf("%p [%p]: PERF_EVENT (IP, %d): %d: %p\n",
@@ -1030,13 +1043,33 @@ process_event(event_t *event, unsigned long offset, unsigned long head)
 	return 0;
 }
 
+static char *get_color(double percent)
+{
+	char *color = PERF_COLOR_NORMAL;
+
+	/*
+	 * We color high-overhead entries in red, mid-overhead
+	 * entries in green - and keep the low overhead places
+	 * normal:
+	 */
+	if (percent >= MIN_RED)
+		color = PERF_COLOR_RED;
+	else {
+		if (percent > MIN_GREEN)
+			color = PERF_COLOR_GREEN;
+	}
+	return color;
+}
+
 static int
-parse_line(FILE *file, struct symbol *sym, __u64 start, __u64 len)
+parse_line(FILE *file, struct symbol *sym, u64 start, u64 len)
 {
 	char *line = NULL, *tmp, *tmp2;
+	static const char *prev_line;
+	static const char *prev_color;
 	unsigned int offset;
 	size_t line_len;
-	__u64 line_ip;
+	u64 line_ip;
 	int ret;
 	char *c;
 
@@ -1073,27 +1106,36 @@ parse_line(FILE *file, struct symbol *sym, __u64 start, __u64 len)
 	}
 
 	if (line_ip != -1) {
+		const char *path = NULL;
 		unsigned int hits = 0;
 		double percent = 0.0;
-		char *color = PERF_COLOR_NORMAL;
+		char *color;
+		struct sym_ext *sym_ext = sym->priv;
 
 		offset = line_ip - start;
 		if (offset < len)
 			hits = sym->hist[offset];
 
-		if (sym->hist_sum)
+		if (offset < len && sym_ext) {
+			path = sym_ext[offset].path;
+			percent = sym_ext[offset].percent;
+		} else if (sym->hist_sum)
 			percent = 100.0 * hits / sym->hist_sum;
 
+		color = get_color(percent);
+
 		/*
-		 * We color high-overhead entries in red, mid-overhead
-		 * entries in green - and keep the low overhead places
-		 * normal:
+		 * Also color the filename and line if needed, with
+		 * the same color than the percentage. Don't print it
+		 * twice for close colored ip with the same filename:line
 		 */
-		if (percent >= 5.0)
-			color = PERF_COLOR_RED;
-		else {
-			if (percent > 0.5)
-				color = PERF_COLOR_GREEN;
+		if (path) {
+			if (!prev_line || strcmp(prev_line, path)
+				       || color != prev_color) {
+				color_fprintf(stdout, color, " %s", path);
+				prev_line = path;
+				prev_color = color;
+			}
 		}
 
 		color_fprintf(stdout, color, " %7.2f", percent);
@@ -1109,10 +1151,125 @@ parse_line(FILE *file, struct symbol *sym, __u64 start, __u64 len)
 	return 0;
 }
 
+static struct rb_root root_sym_ext;
+
+static void insert_source_line(struct sym_ext *sym_ext)
+{
+	struct sym_ext *iter;
+	struct rb_node **p = &root_sym_ext.rb_node;
+	struct rb_node *parent = NULL;
+
+	while (*p != NULL) {
+		parent = *p;
+		iter = rb_entry(parent, struct sym_ext, node);
+
+		if (sym_ext->percent > iter->percent)
+			p = &(*p)->rb_left;
+		else
+			p = &(*p)->rb_right;
+	}
+
+	rb_link_node(&sym_ext->node, parent, p);
+	rb_insert_color(&sym_ext->node, &root_sym_ext);
+}
+
+static void free_source_line(struct symbol *sym, int len)
+{
+	struct sym_ext *sym_ext = sym->priv;
+	int i;
+
+	if (!sym_ext)
+		return;
+
+	for (i = 0; i < len; i++)
+		free(sym_ext[i].path);
+	free(sym_ext);
+
+	sym->priv = NULL;
+	root_sym_ext = RB_ROOT;
+}
+
+/* Get the filename:line for the colored entries */
+static void
+get_source_line(struct symbol *sym, u64 start, int len, char *filename)
+{
+	int i;
+	char cmd[PATH_MAX * 2];
+	struct sym_ext *sym_ext;
+
+	if (!sym->hist_sum)
+		return;
+
+	sym->priv = calloc(len, sizeof(struct sym_ext));
+	if (!sym->priv)
+		return;
+
+	sym_ext = sym->priv;
+
+	for (i = 0; i < len; i++) {
+		char *path = NULL;
+		size_t line_len;
+		u64 offset;
+		FILE *fp;
+
+		sym_ext[i].percent = 100.0 * sym->hist[i] / sym->hist_sum;
+		if (sym_ext[i].percent <= 0.5)
+			continue;
+
+		offset = start + i;
+		sprintf(cmd, "addr2line -e %s %016llx", filename, offset);
+		fp = popen(cmd, "r");
+		if (!fp)
+			continue;
+
+		if (getline(&path, &line_len, fp) < 0 || !line_len)
+			goto next;
+
+		sym_ext[i].path = malloc(sizeof(char) * line_len + 1);
+		if (!sym_ext[i].path)
+			goto next;
+
+		strcpy(sym_ext[i].path, path);
+		insert_source_line(&sym_ext[i]);
+
+	next:
+		pclose(fp);
+	}
+}
+
+static void print_summary(char *filename)
+{
+	struct sym_ext *sym_ext;
+	struct rb_node *node;
+
+	printf("\nSorted summary for file %s\n", filename);
+	printf("----------------------------------------------\n\n");
+
+	if (RB_EMPTY_ROOT(&root_sym_ext)) {
+		printf(" Nothing higher than %1.1f%%\n", MIN_GREEN);
+		return;
+	}
+
+	node = rb_first(&root_sym_ext);
+	while (node) {
+		double percent;
+		char *color;
+		char *path;
+
+		sym_ext = rb_entry(node, struct sym_ext, node);
+		percent = sym_ext->percent;
+		color = get_color(percent);
+		path = sym_ext->path;
+
+		color_fprintf(stdout, color, " %7.2f %s", percent, path);
+		node = rb_next(node);
+	}
+}
+
 static void annotate_sym(struct dso *dso, struct symbol *sym)
 {
 	char *filename = dso->name;
-	__u64 start, end, len;
+	u64 start, end, len;
 	char command[PATH_MAX*2];
 	FILE *file;
 
@@ -1121,13 +1278,6 @@ static void annotate_sym(struct dso *dso, struct symbol *sym)
 	if (dso == kernel_dso)
 		filename = vmlinux;
 
-	printf("\n------------------------------------------------\n");
-	printf(" Percent |	Source code & Disassembly of %s\n", filename);
-	printf("------------------------------------------------\n");
-
-	if (verbose >= 2)
-		printf("annotating [%p] %30s : [%p] %30s\n", dso, dso->name, sym, sym->name);
-
 	start = sym->obj_start;
 	if (!start)
 		start = sym->start;
@@ -1135,7 +1285,19 @@ static void annotate_sym(struct dso *dso, struct symbol *sym)
 	end = start + sym->end - sym->start + 1;
 	len = sym->end - sym->start;
 
-	sprintf(command, "objdump --start-address=0x%016Lx --stop-address=0x%016Lx -dS %s", (__u64)start, (__u64)end, filename);
+	if (print_line) {
+		get_source_line(sym, start, len, filename);
+		print_summary(filename);
+	}
+
+	printf("\n\n------------------------------------------------\n");
+	printf(" Percent |	Source code & Disassembly of %s\n", filename);
+	printf("------------------------------------------------\n");
+
+	if (verbose >= 2)
+		printf("annotating [%p] %30s : [%p] %30s\n", dso, dso->name, sym, sym->name);
+
+	sprintf(command, "objdump --start-address=0x%016Lx --stop-address=0x%016Lx -dS %s", (u64)start, (u64)end, filename);
 
 	if (verbose >= 3)
 		printf("doing: %s\n", command);
@@ -1150,6 +1312,8 @@ static void annotate_sym(struct dso *dso, struct symbol *sym)
 	}
 
 	pclose(file);
+	if (print_line)
+		free_source_line(sym, len);
 }
 
 static void find_annotations(void)
@@ -1308,6 +1472,8 @@ static const struct option options[] = {
 	OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
 		    "dump raw trace in ASCII"),
 	OPT_STRING('k', "vmlinux", &vmlinux, "file", "vmlinux pathname"),
+	OPT_BOOLEAN('l', "print-line", &print_line,
+		    "print matching source lines (may be slow)"),
 	OPT_END()
 };
 
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index 0f5771f615d..d7ebbd75754 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -37,33 +37,37 @@ static pid_t			target_pid			= -1;
 static int			inherit				= 1;
 static int			force				= 0;
 static int			append_file			= 0;
+static int			call_graph			= 0;
 static int			verbose				= 0;
 
 static long			samples;
 static struct timeval		last_read;
 static struct timeval		this_read;
 
-static __u64			bytes_written;
+static u64			bytes_written;
 
 static struct pollfd		event_array[MAX_NR_CPUS * MAX_COUNTERS];
 
 static int			nr_poll;
 static int			nr_cpu;
 
+static int			file_new = 1;
+static struct perf_file_header	file_header;
+
 struct mmap_event {
 	struct perf_event_header	header;
-	__u32				pid;
-	__u32				tid;
-	__u64				start;
-	__u64				len;
-	__u64				pgoff;
+	u32				pid;
+	u32				tid;
+	u64				start;
+	u64				len;
+	u64				pgoff;
 	char				filename[PATH_MAX];
 };
 
 struct comm_event {
 	struct perf_event_header	header;
-	__u32				pid;
-	__u32				tid;
+	u32				pid;
+	u32				tid;
 	char				comm[16];
 };
 
@@ -77,10 +81,10 @@ struct mmap_data {
 
 static struct mmap_data		mmap_array[MAX_NR_CPUS][MAX_COUNTERS];
 
-static unsigned int mmap_read_head(struct mmap_data *md)
+static unsigned long mmap_read_head(struct mmap_data *md)
 {
 	struct perf_counter_mmap_page *pc = md->base;
-	int head;
+	long head;
 
 	head = pc->data_head;
 	rmb();
@@ -88,6 +92,32 @@ static unsigned int mmap_read_head(struct mmap_data *md)
 	return head;
 }
 
+static void mmap_write_tail(struct mmap_data *md, unsigned long tail)
+{
+	struct perf_counter_mmap_page *pc = md->base;
+
+	/*
+	 * ensure all reads are done before we write the tail out.
+	 */
+	/* mb(); */
+	pc->data_tail = tail;
+}
+
+static void write_output(void *buf, size_t size)
+{
+	while (size) {
+		int ret = write(output, buf, size);
+
+		if (ret < 0)
+			die("failed to write");
+
+		size -= ret;
+		buf += ret;
+
+		bytes_written += ret;
+	}
+}
+
 static void mmap_read(struct mmap_data *md)
 {
 	unsigned int head = mmap_read_head(md);
@@ -108,7 +138,7 @@ static void mmap_read(struct mmap_data *md)
 	 * In either case, truncate and restart at head.
 	 */
 	diff = head - old;
-	if (diff > md->mask / 2 || diff < 0) {
+	if (diff < 0) {
 		struct timeval iv;
 		unsigned long msecs;
 
@@ -136,36 +166,17 @@ static void mmap_read(struct mmap_data *md)
 		size = md->mask + 1 - (old & md->mask);
 		old += size;
 
-		while (size) {
-			int ret = write(output, buf, size);
-
-			if (ret < 0)
-				die("failed to write");
-
-			size -= ret;
-			buf += ret;
-
-			bytes_written += ret;
-		}
+		write_output(buf, size);
 	}
 
 	buf = &data[old & md->mask];
 	size = head - old;
 	old += size;
 
-	while (size) {
-		int ret = write(output, buf, size);
-
-		if (ret < 0)
-			die("failed to write");
-
-		size -= ret;
-		buf += ret;
-
-		bytes_written += ret;
-	}
+	write_output(buf, size);
 
 	md->prev = old;
+	mmap_write_tail(md, old);
 }
 
 static volatile int done = 0;
@@ -191,7 +202,7 @@ static void pid_synthesize_comm_event(pid_t pid, int full)
 	struct comm_event comm_ev;
 	char filename[PATH_MAX];
 	char bf[BUFSIZ];
-	int fd, ret;
+	int fd;
 	size_t size;
 	char *field, *sep;
 	DIR *tasks;
@@ -201,8 +212,12 @@ static void pid_synthesize_comm_event(pid_t pid, int full)
 
 	fd = open(filename, O_RDONLY);
 	if (fd < 0) {
-		fprintf(stderr, "couldn't open %s\n", filename);
-		exit(EXIT_FAILURE);
+		/*
+		 * We raced with a task exiting - just return:
+		 */
+		if (verbose)
+			fprintf(stderr, "couldn't open %s\n", filename);
+		return;
 	}
 	if (read(fd, bf, sizeof(bf)) < 0) {
 		fprintf(stderr, "couldn't read %s\n", filename);
@@ -223,17 +238,13 @@ static void pid_synthesize_comm_event(pid_t pid, int full)
 
 	comm_ev.pid = pid;
 	comm_ev.header.type = PERF_EVENT_COMM;
-	size = ALIGN(size, sizeof(__u64));
+	size = ALIGN(size, sizeof(u64));
 	comm_ev.header.size = sizeof(comm_ev) - (sizeof(comm_ev.comm) - size);
 
 	if (!full) {
 		comm_ev.tid = pid;
 
-		ret = write(output, &comm_ev, comm_ev.header.size);
-		if (ret < 0) {
-			perror("failed to write");
-			exit(-1);
-		}
+		write_output(&comm_ev, comm_ev.header.size);
 		return;
 	}
 
@@ -248,11 +259,7 @@ static void pid_synthesize_comm_event(pid_t pid, int full)
 
 		comm_ev.tid = pid;
 
-		ret = write(output, &comm_ev, comm_ev.header.size);
-		if (ret < 0) {
-			perror("failed to write");
-			exit(-1);
-		}
+		write_output(&comm_ev, comm_ev.header.size);
 	}
 	closedir(tasks);
 	return;
@@ -272,8 +279,12 @@ static void pid_synthesize_mmap_samples(pid_t pid)
 
 	fp = fopen(filename, "r");
 	if (fp == NULL) {
-		fprintf(stderr, "couldn't open %s\n", filename);
-		exit(EXIT_FAILURE);
+		/*
+		 * We raced with a task exiting - just return:
+		 */
+		if (verbose)
+			fprintf(stderr, "couldn't open %s\n", filename);
+		return;
 	}
 	while (1) {
 		char bf[BUFSIZ], *pbf = bf;
@@ -304,17 +315,14 @@ static void pid_synthesize_mmap_samples(pid_t pid)
 			size = strlen(execname);
 			execname[size - 1] = '\0'; /* Remove \n */
 			memcpy(mmap_ev.filename, execname, size);
-			size = ALIGN(size, sizeof(__u64));
+			size = ALIGN(size, sizeof(u64));
 			mmap_ev.len -= mmap_ev.start;
 			mmap_ev.header.size = (sizeof(mmap_ev) -
 					       (sizeof(mmap_ev.filename) - size));
 			mmap_ev.pid = pid;
 			mmap_ev.tid = pid;
 
-			if (write(output, &mmap_ev, mmap_ev.header.size) < 0) {
-				perror("failed to write");
-				exit(-1);
-			}
+			write_output(&mmap_ev, mmap_ev.header.size);
 		}
 	}
 
@@ -351,11 +359,25 @@ static void create_counter(int counter, int cpu, pid_t pid)
 	int track = 1;
 
 	attr->sample_type	= PERF_SAMPLE_IP | PERF_SAMPLE_TID;
+
 	if (freq) {
 		attr->sample_type	|= PERF_SAMPLE_PERIOD;
 		attr->freq		= 1;
 		attr->sample_freq	= freq;
 	}
+
+	if (call_graph)
+		attr->sample_type	|= PERF_SAMPLE_CALLCHAIN;
+
+	if (file_new) {
+		file_header.sample_type = attr->sample_type;
+	} else {
+		if (file_header.sample_type != attr->sample_type) {
+			fprintf(stderr, "incompatible append\n");
+			exit(-1);
+		}
+	}
+
 	attr->mmap		= track;
 	attr->comm		= track;
 	attr->inherit		= (cpu < 0) && inherit;
@@ -410,7 +432,7 @@ try_again:
 	mmap_array[nr_cpu][counter].prev = 0;
 	mmap_array[nr_cpu][counter].mask = mmap_pages*page_size - 1;
 	mmap_array[nr_cpu][counter].base = mmap(NULL, (mmap_pages+1)*page_size,
-			PROT_READ, MAP_SHARED, fd[nr_cpu][counter], 0);
+			PROT_READ|PROT_WRITE, MAP_SHARED, fd[nr_cpu][counter], 0);
 	if (mmap_array[nr_cpu][counter].base == MAP_FAILED) {
 		error("failed to mmap with %d (%s)\n", errno, strerror(errno));
 		exit(-1);
@@ -435,6 +457,14 @@ static void open_counters(int cpu, pid_t pid)
 	nr_cpu++;
 }
 
+static void atexit_header(void)
+{
+	file_header.data_size += bytes_written;
+
+	if (pwrite(output, &file_header, sizeof(file_header), 0) == -1)
+		perror("failed to write on file headers");
+}
+
 static int __cmd_record(int argc, const char **argv)
 {
 	int i, counter;
@@ -448,6 +478,10 @@ static int __cmd_record(int argc, const char **argv)
 	assert(nr_cpus <= MAX_NR_CPUS);
 	assert(nr_cpus >= 0);
 
+	atexit(sig_atexit);
+	signal(SIGCHLD, sig_handler);
+	signal(SIGINT, sig_handler);
+
 	if (!stat(output_name, &st) && !force && !append_file) {
 		fprintf(stderr, "Error, output file %s exists, use -A to append or -f to overwrite.\n",
 				output_name);
@@ -456,7 +490,7 @@ static int __cmd_record(int argc, const char **argv)
 
 	flags = O_CREAT|O_RDWR;
 	if (append_file)
-		flags |= O_APPEND;
+		file_new = 0;
 	else
 		flags |= O_TRUNC;
 
@@ -466,15 +500,22 @@ static int __cmd_record(int argc, const char **argv)
 		exit(-1);
 	}
 
+	if (!file_new) {
+		if (read(output, &file_header, sizeof(file_header)) == -1) {
+			perror("failed to read file headers");
+			exit(-1);
+		}
+
+		lseek(output, file_header.data_size, SEEK_CUR);
+	}
+
+	atexit(atexit_header);
+
 	if (!system_wide) {
 		open_counters(-1, target_pid != -1 ? target_pid : getpid());
 	} else for (i = 0; i < nr_cpus; i++)
 		open_counters(i, target_pid);
 
-	atexit(sig_atexit);
-	signal(SIGCHLD, sig_handler);
-	signal(SIGINT, sig_handler);
-
 	if (target_pid == -1 && argc) {
 		pid = fork();
 		if (pid < 0)
@@ -555,6 +596,8 @@ static const struct option options[] = {
 		    "profile at this frequency"),
 	OPT_INTEGER('m', "mmap-pages", &mmap_pages,
 		    "number of mmap data pages"),
+	OPT_BOOLEAN('g', "call-graph", &call_graph,
+		    "do call-graph (stack chain/backtrace) recording"),
 	OPT_BOOLEAN('v', "verbose", &verbose,
 		    "be more verbose (show counter open errors, etc)"),
 	OPT_END()
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index 82fa93b4db9..5eb5566f0c9 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -36,45 +36,65 @@ static int		show_mask = SHOW_KERNEL | SHOW_USER | SHOW_HV;
 
 static int		dump_trace = 0;
 #define dprintf(x...)	do { if (dump_trace) printf(x); } while (0)
+#define cdprintf(x...)	do { if (dump_trace) color_fprintf(stdout, color, x); } while (0)
 
 static int		verbose;
+#define eprintf(x...)	do { if (verbose) fprintf(stderr, x); } while (0)
+
 static int		full_paths;
 
 static unsigned long	page_size;
 static unsigned long	mmap_window = 32;
 
+static char		default_parent_pattern[] = "^sys_|^do_page_fault";
+static char		*parent_pattern = default_parent_pattern;
+static regex_t		parent_regex;
+
+static int		exclude_other = 1;
+
 struct ip_event {
 	struct perf_event_header header;
-	__u64 ip;
-	__u32 pid, tid;
-	__u64 period;
+	u64 ip;
+	u32 pid, tid;
+	unsigned char __more_data[];
+};
+
+struct ip_callchain {
+	u64 nr;
+	u64 ips[0];
 };
 
 struct mmap_event {
 	struct perf_event_header header;
-	__u32 pid, tid;
-	__u64 start;
-	__u64 len;
-	__u64 pgoff;
+	u32 pid, tid;
+	u64 start;
+	u64 len;
+	u64 pgoff;
 	char filename[PATH_MAX];
 };
 
 struct comm_event {
 	struct perf_event_header header;
-	__u32 pid, tid;
+	u32 pid, tid;
 	char comm[16];
 };
 
 struct fork_event {
 	struct perf_event_header header;
-	__u32 pid, ppid;
+	u32 pid, ppid;
 };
 
 struct period_event {
 	struct perf_event_header header;
-	__u64 time;
-	__u64 id;
-	__u64 sample_period;
+	u64 time;
+	u64 id;
+	u64 sample_period;
+};
+
+struct lost_event {
+	struct perf_event_header header;
+	u64 id;
+	u64 lost;
 };
 
 typedef union event_union {
@@ -84,6 +104,7 @@ typedef union event_union {
 	struct comm_event		comm;
 	struct fork_event		fork;
 	struct period_event		period;
+	struct lost_event		lost;
 } event_t;
 
 static LIST_HEAD(dsos);
@@ -119,15 +140,11 @@ static struct dso *dsos__findnew(const char *name)
 
 	nr = dso__load(dso, NULL, verbose);
 	if (nr < 0) {
-		if (verbose)
-			fprintf(stderr, "Failed to open: %s\n", name);
+		eprintf("Failed to open: %s\n", name);
 		goto out_delete_dso;
 	}
-	if (!nr && verbose) {
-		fprintf(stderr,
-		"No symbols found in: %s, maybe install a debug package?\n",
-				name);
-	}
+	if (!nr)
+		eprintf("No symbols found in: %s, maybe install a debug package?\n", name);
 
 	dsos__add(dso);
 
@@ -146,7 +163,7 @@ static void dsos__fprintf(FILE *fp)
 		dso__fprintf(pos, fp);
 }
 
-static struct symbol *vdso__find_symbol(struct dso *dso, __u64 ip)
+static struct symbol *vdso__find_symbol(struct dso *dso, u64 ip)
 {
 	return dso__find_symbol(kernel_dso, ip);
 }
@@ -193,19 +210,19 @@ static int strcommon(const char *pathname)
 
 struct map {
 	struct list_head node;
-	__u64	 start;
-	__u64	 end;
-	__u64	 pgoff;
-	__u64	 (*map_ip)(struct map *, __u64);
+	u64	 start;
+	u64	 end;
+	u64	 pgoff;
+	u64	 (*map_ip)(struct map *, u64);
 	struct dso	 *dso;
 };
 
-static __u64 map__map_ip(struct map *map, __u64 ip)
+static u64 map__map_ip(struct map *map, u64 ip)
 {
 	return ip - map->start + map->pgoff;
 }
 
-static __u64 vdso__map_ip(struct map *map, __u64 ip)
+static u64 vdso__map_ip(struct map *map, u64 ip)
 {
 	return ip;
 }
@@ -412,7 +429,7 @@ static int thread__fork(struct thread *self, struct thread *parent)
 	return 0;
 }
 
-static struct map *thread__find_map(struct thread *self, __u64 ip)
+static struct map *thread__find_map(struct thread *self, u64 ip)
 {
 	struct map *pos;
 
@@ -453,10 +470,11 @@ struct hist_entry {
 	struct map	 *map;
 	struct dso	 *dso;
 	struct symbol	 *sym;
-	__u64		 ip;
+	struct symbol	 *parent;
+	u64		 ip;
 	char		 level;
 
-	__u64		 count;
+	u64		 count;
 };
 
 /*
@@ -473,6 +491,16 @@ struct sort_entry {
 	size_t	(*print)(FILE *fp, struct hist_entry *);
 };
 
+static int64_t cmp_null(void *l, void *r)
+{
+	if (!l && !r)
+		return 0;
+	else if (!l)
+		return -1;
+	else
+		return 1;
+}
+
 /* --sort pid */
 
 static int64_t
@@ -507,14 +535,8 @@ sort__comm_collapse(struct hist_entry *left, struct hist_entry *right)
 	char *comm_l = left->thread->comm;
 	char *comm_r = right->thread->comm;
 
-	if (!comm_l || !comm_r) {
-		if (!comm_l && !comm_r)
-			return 0;
-		else if (!comm_l)
-			return -1;
-		else
-			return 1;
-	}
+	if (!comm_l || !comm_r)
+		return cmp_null(comm_l, comm_r);
 
 	return strcmp(comm_l, comm_r);
 }
@@ -540,14 +562,8 @@ sort__dso_cmp(struct hist_entry *left, struct hist_entry *right)
 	struct dso *dso_l = left->dso;
 	struct dso *dso_r = right->dso;
 
-	if (!dso_l || !dso_r) {
-		if (!dso_l && !dso_r)
-			return 0;
-		else if (!dso_l)
-			return -1;
-		else
-			return 1;
-	}
+	if (!dso_l || !dso_r)
+		return cmp_null(dso_l, dso_r);
 
 	return strcmp(dso_l->name, dso_r->name);
 }
@@ -558,7 +574,7 @@ sort__dso_print(FILE *fp, struct hist_entry *self)
 	if (self->dso)
 		return fprintf(fp, "%-25s", self->dso->name);
 
-	return fprintf(fp, "%016llx         ", (__u64)self->ip);
+	return fprintf(fp, "%016llx         ", (u64)self->ip);
 }
 
 static struct sort_entry sort_dso = {
@@ -572,7 +588,7 @@ static struct sort_entry sort_dso = {
 static int64_t
 sort__sym_cmp(struct hist_entry *left, struct hist_entry *right)
 {
-	__u64 ip_l, ip_r;
+	u64 ip_l, ip_r;
 
 	if (left->sym == right->sym)
 		return 0;
@@ -589,13 +605,13 @@ sort__sym_print(FILE *fp, struct hist_entry *self)
 	size_t ret = 0;
 
 	if (verbose)
-		ret += fprintf(fp, "%#018llx  ", (__u64)self->ip);
+		ret += fprintf(fp, "%#018llx  ", (u64)self->ip);
 
 	if (self->sym) {
 		ret += fprintf(fp, "[%c] %s",
 			self->dso == kernel_dso ? 'k' : '.', self->sym->name);
 	} else {
-		ret += fprintf(fp, "%#016llx", (__u64)self->ip);
+		ret += fprintf(fp, "%#016llx", (u64)self->ip);
 	}
 
 	return ret;
@@ -607,7 +623,38 @@ static struct sort_entry sort_sym = {
 	.print	= sort__sym_print,
 };
 
+/* --sort parent */
+
+static int64_t
+sort__parent_cmp(struct hist_entry *left, struct hist_entry *right)
+{
+	struct symbol *sym_l = left->parent;
+	struct symbol *sym_r = right->parent;
+
+	if (!sym_l || !sym_r)
+		return cmp_null(sym_l, sym_r);
+
+	return strcmp(sym_l->name, sym_r->name);
+}
+
+static size_t
+sort__parent_print(FILE *fp, struct hist_entry *self)
+{
+	size_t ret = 0;
+
+	ret += fprintf(fp, "%-20s", self->parent ? self->parent->name : "[other]");
+
+	return ret;
+}
+
+static struct sort_entry sort_parent = {
+	.header = "Parent symbol       ",
+	.cmp	= sort__parent_cmp,
+	.print	= sort__parent_print,
+};
+
 static int sort__need_collapse = 0;
+static int sort__has_parent = 0;
 
 struct sort_dimension {
 	char			*name;
@@ -620,6 +667,7 @@ static struct sort_dimension sort_dimensions[] = {
 	{ .name = "comm",	.entry = &sort_comm,	},
 	{ .name = "dso",	.entry = &sort_dso,	},
 	{ .name = "symbol",	.entry = &sort_sym,	},
+	{ .name = "parent",	.entry = &sort_parent,	},
 };
 
 static LIST_HEAD(hist_entry__sort_list);
@@ -640,6 +688,19 @@ static int sort_dimension__add(char *tok)
 		if (sd->entry->collapse)
 			sort__need_collapse = 1;
 
+		if (sd->entry == &sort_parent) {
+			int ret = regcomp(&parent_regex, parent_pattern, REG_EXTENDED);
+			if (ret) {
+				char err[BUFSIZ];
+
+				regerror(ret, &parent_regex, err, sizeof(err));
+				fprintf(stderr, "Invalid regex: %s\n%s",
+					parent_pattern, err);
+				exit(-1);
+			}
+			sort__has_parent = 1;
+		}
+
 		list_add_tail(&sd->entry->list, &hist_entry__sort_list);
 		sd->taken = 1;
 
@@ -684,11 +745,14 @@ hist_entry__collapse(struct hist_entry *left, struct hist_entry *right)
 }
 
 static size_t
-hist_entry__fprintf(FILE *fp, struct hist_entry *self, __u64 total_samples)
+hist_entry__fprintf(FILE *fp, struct hist_entry *self, u64 total_samples)
 {
 	struct sort_entry *se;
 	size_t ret;
 
+	if (exclude_other && !self->parent)
+		return 0;
+
 	if (total_samples) {
 		double percent = self->count * 100.0 / total_samples;
 		char *color = PERF_COLOR_NORMAL;
@@ -711,6 +775,9 @@ hist_entry__fprintf(FILE *fp, struct hist_entry *self, __u64 total_samples)
 		ret = fprintf(fp, "%12Ld ", self->count);
 
 	list_for_each_entry(se, &hist_entry__sort_list, list) {
+		if (exclude_other && (se == &sort_parent))
+			continue;
+
 		fprintf(fp, "  ");
 		ret += se->print(fp, self);
 	}
@@ -721,12 +788,72 @@ hist_entry__fprintf(FILE *fp, struct hist_entry *self, __u64 total_samples)
 }
 
 /*
+ *
+ */
+
+static struct symbol *
+resolve_symbol(struct thread *thread, struct map **mapp,
+	       struct dso **dsop, u64 *ipp)
+{
+	struct dso *dso = dsop ? *dsop : NULL;
+	struct map *map = mapp ? *mapp : NULL;
+	uint64_t ip = *ipp;
+
+	if (!thread)
+		return NULL;
+
+	if (dso)
+		goto got_dso;
+
+	if (map)
+		goto got_map;
+
+	map = thread__find_map(thread, ip);
+	if (map != NULL) {
+		if (mapp)
+			*mapp = map;
+got_map:
+		ip = map->map_ip(map, ip);
+		*ipp  = ip;
+
+		dso = map->dso;
+	} else {
+		/*
+		 * If this is outside of all known maps,
+		 * and is a negative address, try to look it
+		 * up in the kernel dso, as it might be a
+		 * vsyscall (which executes in user-mode):
+		 */
+		if ((long long)ip < 0)
+		dso = kernel_dso;
+	}
+	dprintf(" ...... dso: %s\n", dso ? dso->name : "<not found>");
+
+	if (dsop)
+		*dsop = dso;
+
+	if (!dso)
+		return NULL;
+got_dso:
+	return dso->find_symbol(dso, ip);
+}
+
+static int call__match(struct symbol *sym)
+{
+	if (sym->name && !regexec(&parent_regex, sym->name, 0, NULL, 0))
+		return 1;
+
+	return 0;
+}
+
+/*
  * collect histogram counts
  */
 
 static int
 hist_entry__add(struct thread *thread, struct map *map, struct dso *dso,
-		struct symbol *sym, __u64 ip, char level, __u64 count)
+		struct symbol *sym, u64 ip, struct ip_callchain *chain,
+		char level, u64 count)
 {
 	struct rb_node **p = &hist.rb_node;
 	struct rb_node *parent = NULL;
@@ -739,9 +866,41 @@ hist_entry__add(struct thread *thread, struct map *map, struct dso *dso,
 		.ip	= ip,
 		.level	= level,
 		.count	= count,
+		.parent = NULL,
 	};
 	int cmp;
 
+	if (sort__has_parent && chain) {
+		u64 context = PERF_CONTEXT_MAX;
+		int i;
+
+		for (i = 0; i < chain->nr; i++) {
+			u64 ip = chain->ips[i];
+			struct dso *dso = NULL;
+			struct symbol *sym;
+
+			if (ip >= PERF_CONTEXT_MAX) {
+				context = ip;
+				continue;
+			}
+
+			switch (context) {
+			case PERF_CONTEXT_KERNEL:
+				dso = kernel_dso;
+				break;
+			default:
+				break;
+			}
+
+			sym = resolve_symbol(thread, NULL, &dso, &ip);
+
+			if (sym && call__match(sym)) {
+				entry.parent = sym;
+				break;
+			}
+		}
+	}
+
 	while (*p != NULL) {
 		parent = *p;
 		he = rb_entry(parent, struct hist_entry, rb_node);
@@ -873,7 +1032,7 @@ static void output__resort(void)
 	}
 }
 
-static size_t output__fprintf(FILE *fp, __u64 total_samples)
+static size_t output__fprintf(FILE *fp, u64 total_samples)
 {
 	struct hist_entry *pos;
 	struct sort_entry *se;
@@ -882,18 +1041,24 @@ static size_t output__fprintf(FILE *fp, __u64 total_samples)
 
 	fprintf(fp, "\n");
 	fprintf(fp, "#\n");
-	fprintf(fp, "# (%Ld samples)\n", (__u64)total_samples);
+	fprintf(fp, "# (%Ld samples)\n", (u64)total_samples);
 	fprintf(fp, "#\n");
 
 	fprintf(fp, "# Overhead");
-	list_for_each_entry(se, &hist_entry__sort_list, list)
+	list_for_each_entry(se, &hist_entry__sort_list, list) {
+		if (exclude_other && (se == &sort_parent))
+			continue;
 		fprintf(fp, "  %s", se->header);
+	}
 	fprintf(fp, "\n");
 
 	fprintf(fp, "# ........");
 	list_for_each_entry(se, &hist_entry__sort_list, list) {
 		int i;
 
+		if (exclude_other && (se == &sort_parent))
+			continue;
+
 		fprintf(fp, "  ");
 		for (i = 0; i < strlen(se->header); i++)
 			fprintf(fp, ".");
@@ -907,7 +1072,8 @@ static size_t output__fprintf(FILE *fp, __u64 total_samples)
 		ret += hist_entry__fprintf(fp, pos, total_samples);
 	}
 
-	if (!strcmp(sort_order, default_sort_order)) {
+	if (sort_order == default_sort_order &&
+			parent_pattern == default_parent_pattern) {
 		fprintf(fp, "#\n");
 		fprintf(fp, "# (For more details, try: perf report --sort comm,dso,symbol)\n");
 		fprintf(fp, "#\n");
@@ -932,7 +1098,21 @@ static unsigned long total = 0,
 		     total_mmap = 0,
 		     total_comm = 0,
 		     total_fork = 0,
-		     total_unknown = 0;
+		     total_unknown = 0,
+		     total_lost = 0;
+
+static int validate_chain(struct ip_callchain *chain, event_t *event)
+{
+	unsigned int chain_size;
+
+	chain_size = event->header.size;
+	chain_size -= (unsigned long)&event->ip.__more_data - (unsigned long)event;
+
+	if (chain->nr*sizeof(u64) > chain_size)
+		return -1;
+
+	return 0;
+}
 
 static int
 process_overflow_event(event_t *event, unsigned long offset, unsigned long head)
@@ -941,12 +1121,16 @@ process_overflow_event(event_t *event, unsigned long offset, unsigned long head)
 	int show = 0;
 	struct dso *dso = NULL;
 	struct thread *thread = threads__findnew(event->ip.pid);
-	__u64 ip = event->ip.ip;
-	__u64 period = 1;
+	u64 ip = event->ip.ip;
+	u64 period = 1;
 	struct map *map = NULL;
+	void *more_data = event->ip.__more_data;
+	struct ip_callchain *chain = NULL;
 
-	if (event->header.type & PERF_SAMPLE_PERIOD)
-		period = event->ip.period;
+	if (event->header.type & PERF_SAMPLE_PERIOD) {
+		period = *(u64 *)more_data;
+		more_data += sizeof(u64);
+	}
 
 	dprintf("%p [%p]: PERF_EVENT (IP, %d): %d: %p period: %Ld\n",
 		(void *)(offset + head),
@@ -956,10 +1140,28 @@ process_overflow_event(event_t *event, unsigned long offset, unsigned long head)
 		(void *)(long)ip,
 		(long long)period);
 
+	if (event->header.type & PERF_SAMPLE_CALLCHAIN) {
+		int i;
+
+		chain = (void *)more_data;
+
+		dprintf("... chain: nr:%Lu\n", chain->nr);
+
+		if (validate_chain(chain, event) < 0) {
+			eprintf("call-chain problem with event, skipping it.\n");
+			return 0;
+		}
+
+		if (dump_trace) {
+			for (i = 0; i < chain->nr; i++)
+				dprintf("..... %2d: %016Lx\n", i, chain->ips[i]);
+		}
+	}
+
 	dprintf(" ... thread: %s:%d\n", thread->comm, thread->pid);
 
 	if (thread == NULL) {
-		fprintf(stderr, "problem processing %d event, skipping it.\n",
+		eprintf("problem processing %d event, skipping it.\n",
 			event->header.type);
 		return -1;
 	}
@@ -977,22 +1179,6 @@ process_overflow_event(event_t *event, unsigned long offset, unsigned long head)
 		show = SHOW_USER;
 		level = '.';
 
-		map = thread__find_map(thread, ip);
-		if (map != NULL) {
-			ip = map->map_ip(map, ip);
-			dso = map->dso;
-		} else {
-			/*
-			 * If this is outside of all known maps,
-			 * and is a negative address, try to look it
-			 * up in the kernel dso, as it might be a
-			 * vsyscall (which executes in user-mode):
-			 */
-			if ((long long)ip < 0)
-				dso = kernel_dso;
-		}
-		dprintf(" ...... dso: %s\n", dso ? dso->name : "<not found>");
-
 	} else {
 		show = SHOW_HV;
 		level = 'H';
@@ -1000,14 +1186,10 @@ process_overflow_event(event_t *event, unsigned long offset, unsigned long head)
 	}
 
 	if (show & show_mask) {
-		struct symbol *sym = NULL;
-
-		if (dso)
-			sym = dso->find_symbol(dso, ip);
+		struct symbol *sym = resolve_symbol(thread, &map, &dso, &ip);
 
-		if (hist_entry__add(thread, map, dso, sym, ip, level, period)) {
-			fprintf(stderr,
-		"problem incrementing symbol count, skipping event\n");
+		if (hist_entry__add(thread, map, dso, sym, ip, chain, level, period)) {
+			eprintf("problem incrementing symbol count, skipping event\n");
 			return -1;
 		}
 	}
@@ -1096,8 +1278,60 @@ process_period_event(event_t *event, unsigned long offset, unsigned long head)
 }
 
 static int
+process_lost_event(event_t *event, unsigned long offset, unsigned long head)
+{
+	dprintf("%p [%p]: PERF_EVENT_LOST: id:%Ld: lost:%Ld\n",
+		(void *)(offset + head),
+		(void *)(long)(event->header.size),
+		event->lost.id,
+		event->lost.lost);
+
+	total_lost += event->lost.lost;
+
+	return 0;
+}
+
+static void trace_event(event_t *event)
+{
+	unsigned char *raw_event = (void *)event;
+	char *color = PERF_COLOR_BLUE;
+	int i, j;
+
+	if (!dump_trace)
+		return;
+
+	dprintf(".");
+	cdprintf("\n. ... raw event: size %d bytes\n", event->header.size);
+
+	for (i = 0; i < event->header.size; i++) {
+		if ((i & 15) == 0) {
+			dprintf(".");
+			cdprintf("  %04x: ", i);
+		}
+
+		cdprintf(" %02x", raw_event[i]);
+
+		if (((i & 15) == 15) || i == event->header.size-1) {
+			cdprintf("  ");
+			for (j = 0; j < 15-(i & 15); j++)
+				cdprintf("   ");
+			for (j = 0; j < (i & 15); j++) {
+				if (isprint(raw_event[i-15+j]))
+					cdprintf("%c", raw_event[i-15+j]);
+				else
+					cdprintf(".");
+			}
+			cdprintf("\n");
+		}
+	}
+	dprintf(".\n");
+}
+
+static int
 process_event(event_t *event, unsigned long offset, unsigned long head)
 {
+	trace_event(event);
+
 	if (event->header.misc & PERF_EVENT_MISC_OVERFLOW)
 		return process_overflow_event(event, offset, head);
 
@@ -1113,6 +1347,10 @@ process_event(event_t *event, unsigned long offset, unsigned long head)
 
 	case PERF_EVENT_PERIOD:
 		return process_period_event(event, offset, head);
+
+	case PERF_EVENT_LOST:
+		return process_lost_event(event, offset, head);
+
 	/*
 	 * We dont process them right now but they are fine:
 	 */
@@ -1128,11 +1366,13 @@ process_event(event_t *event, unsigned long offset, unsigned long head)
 	return 0;
 }
 
+static struct perf_file_header		file_header;
+
 static int __cmd_report(void)
 {
 	int ret, rc = EXIT_FAILURE;
 	unsigned long offset = 0;
-	unsigned long head = 0;
+	unsigned long head = sizeof(file_header);
 	struct stat stat;
 	event_t *event;
 	uint32_t size;
@@ -1160,6 +1400,17 @@ static int __cmd_report(void)
 		exit(0);
 	}
 
+	if (read(input, &file_header, sizeof(file_header)) == -1) {
+		perror("failed to read file headers");
+		exit(-1);
+	}
+
+	if (sort__has_parent &&
+	    !(file_header.sample_type & PERF_SAMPLE_CALLCHAIN)) {
+		fprintf(stderr, "selected --sort parent, but no callchain data\n");
+		exit(-1);
+	}
+
 	if (load_kernel() < 0) {
 		perror("failed to load kernel symbols");
 		return EXIT_FAILURE;
@@ -1204,7 +1455,7 @@ more:
 
 	size = event->header.size;
 
-	dprintf("%p [%p]: event: %d\n",
+	dprintf("\n%p [%p]: event: %d\n",
 			(void *)(offset + head),
 			(void *)(long)event->header.size,
 			event->header.type);
@@ -1231,9 +1482,13 @@ more:
 
 	head += size;
 
+	if (offset + head >= sizeof(file_header) + file_header.data_size)
+		goto done;
+
 	if (offset + head < stat.st_size)
 		goto more;
 
+done:
 	rc = EXIT_SUCCESS;
 	close(input);
 
@@ -1241,6 +1496,7 @@ more:
 	dprintf("    mmap events: %10ld\n", total_mmap);
 	dprintf("    comm events: %10ld\n", total_comm);
 	dprintf("    fork events: %10ld\n", total_fork);
+	dprintf("    lost events: %10ld\n", total_lost);
 	dprintf(" unknown events: %10ld\n", total_unknown);
 
 	if (dump_trace)
@@ -1273,9 +1529,13 @@ static const struct option options[] = {
 		    "dump raw trace in ASCII"),
 	OPT_STRING('k', "vmlinux", &vmlinux, "file", "vmlinux pathname"),
 	OPT_STRING('s', "sort", &sort_order, "key[,key2...]",
-		   "sort by key(s): pid, comm, dso, symbol. Default: pid,symbol"),
+		   "sort by key(s): pid, comm, dso, symbol, parent"),
 	OPT_BOOLEAN('P', "full-paths", &full_paths,
 		    "Don't shorten the pathnames taking into account the cwd"),
+	OPT_STRING('p', "parent", &parent_pattern, "regex",
+		   "regex filter to identify parent, see: '--sort parent'"),
+	OPT_BOOLEAN('x', "exclude-other", &exclude_other,
+		    "Only display entries with parent-match"),
 	OPT_END()
 };
 
@@ -1304,6 +1564,11 @@ int cmd_report(int argc, const char **argv, const char *prefix)
 
 	setup_sorting();
 
+	if (parent_pattern != default_parent_pattern)
+		sort_dimension__add("parent");
+	else
+		exclude_other = 0;
+
 	/*
 	 * Any (unrecognized) arguments left?
 	 */
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index c43e4a97dc4..6d3eeac1ea2 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -43,6 +43,7 @@
 #include "util/parse-events.h"
 
 #include <sys/prctl.h>
+#include <math.h>
 
 static struct perf_counter_attr default_attrs[MAX_COUNTERS] = {
 
@@ -79,12 +80,34 @@ static const unsigned int default_count[] = {
 	  10000,
 };
 
-static __u64			event_res[MAX_COUNTERS][3];
-static __u64			event_scaled[MAX_COUNTERS];
+#define MAX_RUN 100
 
-static __u64			runtime_nsecs;
-static __u64			walltime_nsecs;
-static __u64			runtime_cycles;
+static int			run_count		=  1;
+static int			run_idx			=  0;
+
+static u64			event_res[MAX_RUN][MAX_COUNTERS][3];
+static u64			event_scaled[MAX_RUN][MAX_COUNTERS];
+
+//static u64			event_hist[MAX_RUN][MAX_COUNTERS][3];
+
+
+static u64			runtime_nsecs[MAX_RUN];
+static u64			walltime_nsecs[MAX_RUN];
+static u64			runtime_cycles[MAX_RUN];
+
+static u64			event_res_avg[MAX_COUNTERS][3];
+static u64			event_res_noise[MAX_COUNTERS][3];
+
+static u64			event_scaled_avg[MAX_COUNTERS];
+
+static u64			runtime_nsecs_avg;
+static u64			runtime_nsecs_noise;
+
+static u64			walltime_nsecs_avg;
+static u64			walltime_nsecs_noise;
+
+static u64			runtime_cycles_avg;
+static u64			runtime_cycles_noise;
 
 static void create_perf_stat_counter(int counter)
 {
@@ -135,12 +158,12 @@ static inline int nsec_counter(int counter)
  */
 static void read_counter(int counter)
 {
-	__u64 *count, single_count[3];
+	u64 *count, single_count[3];
 	ssize_t res;
 	int cpu, nv;
 	int scaled;
 
-	count = event_res[counter];
+	count = event_res[run_idx][counter];
 
 	count[0] = count[1] = count[2] = 0;
 
@@ -149,8 +172,10 @@ static void read_counter(int counter)
 		if (fd[cpu][counter] < 0)
 			continue;
 
-		res = read(fd[cpu][counter], single_count, nv * sizeof(__u64));
-		assert(res == nv * sizeof(__u64));
+		res = read(fd[cpu][counter], single_count, nv * sizeof(u64));
+		assert(res == nv * sizeof(u64));
+		close(fd[cpu][counter]);
+		fd[cpu][counter] = -1;
 
 		count[0] += single_count[0];
 		if (scale) {
@@ -162,13 +187,13 @@ static void read_counter(int counter)
 	scaled = 0;
 	if (scale) {
 		if (count[2] == 0) {
-			event_scaled[counter] = -1;
+			event_scaled[run_idx][counter] = -1;
 			count[0] = 0;
 			return;
 		}
 
 		if (count[2] < count[1]) {
-			event_scaled[counter] = 1;
+			event_scaled[run_idx][counter] = 1;
 			count[0] = (unsigned long long)
 				((double)count[0] * count[1] / count[2] + 0.5);
 		}
@@ -178,10 +203,94 @@ static void read_counter(int counter)
 	 */
 	if (attrs[counter].type == PERF_TYPE_SOFTWARE &&
 		attrs[counter].config == PERF_COUNT_SW_TASK_CLOCK)
-		runtime_nsecs = count[0];
+		runtime_nsecs[run_idx] = count[0];
 	if (attrs[counter].type == PERF_TYPE_HARDWARE &&
 		attrs[counter].config == PERF_COUNT_HW_CPU_CYCLES)
-		runtime_cycles = count[0];
+		runtime_cycles[run_idx] = count[0];
+}
+
+static int run_perf_stat(int argc, const char **argv)
+{
+	unsigned long long t0, t1;
+	int status = 0;
+	int counter;
+	int pid;
+
+	if (!system_wide)
+		nr_cpus = 1;
+
+	for (counter = 0; counter < nr_counters; counter++)
+		create_perf_stat_counter(counter);
+
+	/*
+	 * Enable counters and exec the command:
+	 */
+	t0 = rdclock();
+	prctl(PR_TASK_PERF_COUNTERS_ENABLE);
+
+	if ((pid = fork()) < 0)
+		perror("failed to fork");
+
+	if (!pid) {
+		if (execvp(argv[0], (char **)argv)) {
+			perror(argv[0]);
+			exit(-1);
+		}
+	}
+
+	wait(&status);
+
+	prctl(PR_TASK_PERF_COUNTERS_DISABLE);
+	t1 = rdclock();
+
+	walltime_nsecs[run_idx] = t1 - t0;
+
+	for (counter = 0; counter < nr_counters; counter++)
+		read_counter(counter);
+
+	return WEXITSTATUS(status);
+}
+
+static void print_noise(u64 *count, u64 *noise)
+{
+	if (run_count > 1)
+		fprintf(stderr, "   ( +- %7.3f%% )",
+			(double)noise[0]/(count[0]+1)*100.0);
+}
+
+static void nsec_printout(int counter, u64 *count, u64 *noise)
+{
+	double msecs = (double)count[0] / 1000000;
+
+	fprintf(stderr, " %14.6f  %-20s", msecs, event_name(counter));
+
+	if (attrs[counter].type == PERF_TYPE_SOFTWARE &&
+		attrs[counter].config == PERF_COUNT_SW_TASK_CLOCK) {
+
+		if (walltime_nsecs_avg)
+			fprintf(stderr, " # %10.3f CPUs ",
+				(double)count[0] / (double)walltime_nsecs_avg);
+	}
+	print_noise(count, noise);
+}
+
+static void abs_printout(int counter, u64 *count, u64 *noise)
+{
+	fprintf(stderr, " %14Ld  %-20s", count[0], event_name(counter));
+
+	if (runtime_cycles_avg &&
+		attrs[counter].type == PERF_TYPE_HARDWARE &&
+			attrs[counter].config == PERF_COUNT_HW_INSTRUCTIONS) {
+
+		fprintf(stderr, " # %10.3f IPC  ",
+			(double)count[0] / (double)runtime_cycles_avg);
+	} else {
+		if (runtime_nsecs_avg) {
+			fprintf(stderr, " # %10.3f M/sec",
+				(double)count[0]/runtime_nsecs_avg*1000.0);
+		}
+	}
+	print_noise(count, noise);
 }
 
 /*
@@ -189,11 +298,12 @@ static void read_counter(int counter)
  */
 static void print_counter(int counter)
 {
-	__u64 *count;
+	u64 *count, *noise;
 	int scaled;
 
-	count = event_res[counter];
-	scaled = event_scaled[counter];
+	count = event_res_avg[counter];
+	noise = event_res_noise[counter];
+	scaled = event_scaled_avg[counter];
 
 	if (scaled == -1) {
 		fprintf(stderr, " %14s  %-20s\n",
@@ -201,75 +311,107 @@ static void print_counter(int counter)
 		return;
 	}
 
-	if (nsec_counter(counter)) {
-		double msecs = (double)count[0] / 1000000;
-
-		fprintf(stderr, " %14.6f  %-20s",
-			msecs, event_name(counter));
-		if (attrs[counter].type == PERF_TYPE_SOFTWARE &&
-			attrs[counter].config == PERF_COUNT_SW_TASK_CLOCK) {
+	if (nsec_counter(counter))
+		nsec_printout(counter, count, noise);
+	else
+		abs_printout(counter, count, noise);
 
-			if (walltime_nsecs)
-				fprintf(stderr, " # %11.3f CPU utilization factor",
-					(double)count[0] / (double)walltime_nsecs);
-		}
-	} else {
-		fprintf(stderr, " %14Ld  %-20s",
-			count[0], event_name(counter));
-		if (runtime_nsecs)
-			fprintf(stderr, " # %11.3f M/sec",
-				(double)count[0]/runtime_nsecs*1000.0);
-		if (runtime_cycles &&
-			attrs[counter].type == PERF_TYPE_HARDWARE &&
-				attrs[counter].config == PERF_COUNT_HW_INSTRUCTIONS) {
-
-			fprintf(stderr, " # %1.3f per cycle",
-				(double)count[0] / (double)runtime_cycles);
-		}
-	}
 	if (scaled)
 		fprintf(stderr, "  (scaled from %.2f%%)",
 			(double) count[2] / count[1] * 100);
+
 	fprintf(stderr, "\n");
 }
 
-static int do_perf_stat(int argc, const char **argv)
+/*
+ * normalize_noise noise values down to stddev:
+ */
+static void normalize_noise(u64 *val)
 {
-	unsigned long long t0, t1;
-	int counter;
-	int status;
-	int pid;
-	int i;
+	double res;
 
-	if (!system_wide)
-		nr_cpus = 1;
+	res = (double)*val / (run_count * sqrt((double)run_count));
 
-	for (counter = 0; counter < nr_counters; counter++)
-		create_perf_stat_counter(counter);
+	*val = (u64)res;
+}
 
-	/*
-	 * Enable counters and exec the command:
-	 */
-	t0 = rdclock();
-	prctl(PR_TASK_PERF_COUNTERS_ENABLE);
+static void update_avg(const char *name, int idx, u64 *avg, u64 *val)
+{
+	*avg += *val;
 
-	if ((pid = fork()) < 0)
-		perror("failed to fork");
+	if (verbose > 1)
+		fprintf(stderr, "debug: %20s[%d]: %Ld\n", name, idx, *val);
+}
+/*
+ * Calculate the averages and noises:
+ */
+static void calc_avg(void)
+{
+	int i, j;
+
+	if (verbose > 1)
+		fprintf(stderr, "\n");
+
+	for (i = 0; i < run_count; i++) {
+		update_avg("runtime", 0, &runtime_nsecs_avg, runtime_nsecs + i);
+		update_avg("walltime", 0, &walltime_nsecs_avg, walltime_nsecs + i);
+		update_avg("runtime_cycles", 0, &runtime_cycles_avg, runtime_cycles + i);
+
+		for (j = 0; j < nr_counters; j++) {
+			update_avg("counter/0", j,
+				event_res_avg[j]+0, event_res[i][j]+0);
+			update_avg("counter/1", j,
+				event_res_avg[j]+1, event_res[i][j]+1);
+			update_avg("counter/2", j,
+				event_res_avg[j]+2, event_res[i][j]+2);
+			update_avg("scaled", j,
+				event_scaled_avg + j, event_scaled[i]+j);
+		}
+	}
+	runtime_nsecs_avg /= run_count;
+	walltime_nsecs_avg /= run_count;
+	runtime_cycles_avg /= run_count;
+
+	for (j = 0; j < nr_counters; j++) {
+		event_res_avg[j][0] /= run_count;
+		event_res_avg[j][1] /= run_count;
+		event_res_avg[j][2] /= run_count;
+	}
 
-	if (!pid) {
-		if (execvp(argv[0], (char **)argv)) {
-			perror(argv[0]);
-			exit(-1);
+	for (i = 0; i < run_count; i++) {
+		runtime_nsecs_noise +=
+			abs((s64)(runtime_nsecs[i] - runtime_nsecs_avg));
+		walltime_nsecs_noise +=
+			abs((s64)(walltime_nsecs[i] - walltime_nsecs_avg));
+		runtime_cycles_noise +=
+			abs((s64)(runtime_cycles[i] - runtime_cycles_avg));
+
+		for (j = 0; j < nr_counters; j++) {
+			event_res_noise[j][0] +=
+				abs((s64)(event_res[i][j][0] - event_res_avg[j][0]));
+			event_res_noise[j][1] +=
+				abs((s64)(event_res[i][j][1] - event_res_avg[j][1]));
+			event_res_noise[j][2] +=
+				abs((s64)(event_res[i][j][2] - event_res_avg[j][2]));
 		}
 	}
 
-	while (wait(&status) >= 0)
-		;
+	normalize_noise(&runtime_nsecs_noise);
+	normalize_noise(&walltime_nsecs_noise);
+	normalize_noise(&runtime_cycles_noise);
 
-	prctl(PR_TASK_PERF_COUNTERS_DISABLE);
-	t1 = rdclock();
+	for (j = 0; j < nr_counters; j++) {
+		normalize_noise(&event_res_noise[j][0]);
+		normalize_noise(&event_res_noise[j][1]);
+		normalize_noise(&event_res_noise[j][2]);
+	}
+}
 
-	walltime_nsecs = t1 - t0;
+static void print_stat(int argc, const char **argv)
+{
+	int i, counter;
+
+	calc_avg();
 
 	fflush(stdout);
 
@@ -279,22 +421,19 @@ static int do_perf_stat(int argc, const char **argv)
 	for (i = 1; i < argc; i++)
 		fprintf(stderr, " %s", argv[i]);
 
-	fprintf(stderr, "\':\n");
-	fprintf(stderr, "\n");
-
-	for (counter = 0; counter < nr_counters; counter++)
-		read_counter(counter);
+	fprintf(stderr, "\'");
+	if (run_count > 1)
+		fprintf(stderr, " (%d runs)", run_count);
+	fprintf(stderr, ":\n\n");
 
 	for (counter = 0; counter < nr_counters; counter++)
 		print_counter(counter);
 
 
 	fprintf(stderr, "\n");
-	fprintf(stderr, " Wall-clock time elapsed: %12.6f msecs\n",
-			(double)(t1-t0)/1e6);
+	fprintf(stderr, " %14.9f  seconds time elapsed.\n",
+			(double)walltime_nsecs_avg/1e9);
 	fprintf(stderr, "\n");
-
-	return 0;
 }
 
 static volatile int signr = -1;
@@ -332,11 +471,15 @@ static const struct option options[] = {
 			    "scale/normalize counters"),
 	OPT_BOOLEAN('v', "verbose", &verbose,
 		    "be more verbose (show counter open errors, etc)"),
+	OPT_INTEGER('r', "repeat", &run_count,
+		    "repeat command and print average + stddev (max: 100)"),
 	OPT_END()
 };
 
 int cmd_stat(int argc, const char **argv, const char *prefix)
 {
+	int status;
+
 	page_size = sysconf(_SC_PAGE_SIZE);
 
 	memcpy(attrs, default_attrs, sizeof(attrs));
@@ -344,6 +487,8 @@ int cmd_stat(int argc, const char **argv, const char *prefix)
 	argc = parse_options(argc, argv, options, stat_usage, 0);
 	if (!argc)
 		usage_with_options(stat_usage, options);
+	if (run_count <= 0 || run_count > MAX_RUN)
+		usage_with_options(stat_usage, options);
 
 	if (!nr_counters)
 		nr_counters = 8;
@@ -363,5 +508,14 @@ int cmd_stat(int argc, const char **argv, const char *prefix)
 	signal(SIGALRM, skip_signal);
 	signal(SIGABRT, skip_signal);
 
-	return do_perf_stat(argc, argv);
+	status = 0;
+	for (run_idx = 0; run_idx < run_count; run_idx++) {
+		if (run_count != 1 && verbose)
+			fprintf(stderr, "[ perf stat: executing run #%d ... ]\n", run_idx+1);
+		status = run_perf_stat(argc, argv);
+	}
+
+	print_stat(argc, argv);
+
+	return status;
 }
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index fe338d3c5d7..5352b5e352e 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -54,7 +54,7 @@ static int			system_wide			=  0;
 
 static int			default_interval		= 100000;
 
-static __u64			count_filter			=  5;
+static u64			count_filter			=  5;
 static int			print_entries			= 15;
 
 static int			target_pid			= -1;
@@ -79,8 +79,8 @@ static int			dump_symtab;
  * Symbols
  */
 
-static __u64			min_ip;
-static __u64			max_ip = -1ll;
+static u64			min_ip;
+static u64			max_ip = -1ll;
 
 struct sym_entry {
 	struct rb_node		rb_node;
@@ -194,7 +194,7 @@ static void print_sym_table(void)
 		100.0 - (100.0*((samples_per_sec-ksamples_per_sec)/samples_per_sec)));
 
 	if (nr_counters == 1) {
-		printf("%Ld", attrs[0].sample_period);
+		printf("%Ld", (u64)attrs[0].sample_period);
 		if (freq)
 			printf("Hz ");
 		else
@@ -372,7 +372,7 @@ out_delete_dso:
 /*
  * Binary search in the histogram table and record the hit:
  */
-static void record_ip(__u64 ip, int counter)
+static void record_ip(u64 ip, int counter)
 {
 	struct symbol *sym = dso__find_symbol(kernel_dso, ip);
 
@@ -392,7 +392,7 @@ static void record_ip(__u64 ip, int counter)
 	samples--;
 }
 
-static void process_event(__u64 ip, int counter)
+static void process_event(u64 ip, int counter)
 {
 	samples++;
 
@@ -463,15 +463,15 @@ static void mmap_read_counter(struct mmap_data *md)
 	for (; old != head;) {
 		struct ip_event {
 			struct perf_event_header header;
-			__u64 ip;
-			__u32 pid, target_pid;
+			u64 ip;
+			u32 pid, target_pid;
 		};
 		struct mmap_event {
 			struct perf_event_header header;
-			__u32 pid, target_pid;
-			__u64 start;
-			__u64 len;
-			__u64 pgoff;
+			u32 pid, target_pid;
+			u64 start;
+			u64 len;
+			u64 pgoff;
 			char filename[PATH_MAX];
 		};
 
diff --git a/tools/perf/perf.h b/tools/perf/perf.h
index 87a1aca4a42..ceb68aa51f7 100644
--- a/tools/perf/perf.h
+++ b/tools/perf/perf.h
@@ -13,12 +13,19 @@
 #define cpu_relax()	asm volatile ("" ::: "memory");
 #endif
 
+#ifdef __s390__
+#include "../../arch/s390/include/asm/unistd.h"
+#define rmb()		asm volatile("bcr 15,0" ::: "memory")
+#define cpu_relax()	asm volatile("" ::: "memory");
+#endif
+
 #include <time.h>
 #include <unistd.h>
 #include <sys/types.h>
 #include <sys/syscall.h>
 
 #include "../../include/linux/perf_counter.h"
+#include "types.h"
 
 /*
  * prctl(PR_TASK_PERF_COUNTERS_DISABLE) will (cheaply) disable all
@@ -65,4 +72,10 @@ sys_perf_counter_open(struct perf_counter_attr *attr,
 #define MAX_COUNTERS			256
 #define MAX_NR_CPUS			256
 
+struct perf_file_header {
+	u64	version;
+	u64	sample_type;
+	u64	data_size;
+};
+
 #endif
diff --git a/tools/perf/types.h b/tools/perf/types.h
new file mode 100644
index 00000000000..5e75f900594
--- /dev/null
+++ b/tools/perf/types.h
@@ -0,0 +1,17 @@
+#ifndef _PERF_TYPES_H
+#define _PERF_TYPES_H
+
+/*
+ * We define u64 as unsigned long long for every architecture
+ * so that we can print it with %Lx without getting warnings.
+ */
+typedef unsigned long long u64;
+typedef signed long long   s64;
+typedef unsigned int	   u32;
+typedef signed int	   s32;
+typedef unsigned short	   u16;
+typedef signed short	   s16;
+typedef unsigned char	   u8;
+typedef signed char	   s8;
+
+#endif /* _PERF_TYPES_H */
diff --git a/tools/perf/util/ctype.c b/tools/perf/util/ctype.c
index b90ec004f29..0b791bd346b 100644
--- a/tools/perf/util/ctype.c
+++ b/tools/perf/util/ctype.c
@@ -11,16 +11,21 @@ enum {
 	D = GIT_DIGIT,
 	G = GIT_GLOB_SPECIAL,	/* *, ?, [, \\ */
 	R = GIT_REGEX_SPECIAL,	/* $, (, ), +, ., ^, {, | * */
+	P = GIT_PRINT_EXTRA,	/* printable - alpha - digit - glob - regex */
+
+	PS = GIT_SPACE | GIT_PRINT_EXTRA,
 };
 
 unsigned char sane_ctype[256] = {
+/*	0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F			    */
+
 	0, 0, 0, 0, 0, 0, 0, 0, 0, S, S, 0, 0, S, 0, 0,		/*   0.. 15 */
 	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,		/*  16.. 31 */
-	S, 0, 0, 0, R, 0, 0, 0, R, R, G, R, 0, 0, R, 0,		/*  32.. 47 */
-	D, D, D, D, D, D, D, D, D, D, 0, 0, 0, 0, 0, G,		/*  48.. 63 */
-	0, A, A, A, A, A, A, A, A, A, A, A, A, A, A, A,		/*  64.. 79 */
-	A, A, A, A, A, A, A, A, A, A, A, G, G, 0, R, 0,		/*  80.. 95 */
-	0, A, A, A, A, A, A, A, A, A, A, A, A, A, A, A,		/*  96..111 */
-	A, A, A, A, A, A, A, A, A, A, A, R, R, 0, 0, 0,		/* 112..127 */
+	PS,P, P, P, R, P, P, P, R, R, G, R, P, P, R, P,		/*  32.. 47 */
+	D, D, D, D, D, D, D, D, D, D, P, P, P, P, P, G,		/*  48.. 63 */
+	P, A, A, A, A, A, A, A, A, A, A, A, A, A, A, A,		/*  64.. 79 */
+	A, A, A, A, A, A, A, A, A, A, A, G, G, P, R, P,		/*  80.. 95 */
+	P, A, A, A, A, A, A, A, A, A, A, A, A, A, A, A,		/*  96..111 */
+	A, A, A, A, A, A, A, A, A, A, A, R, R, P, P, 0,		/* 112..127 */
 	/* Nothing in the 128.. range */
 };
diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index 5a72586e1df..35d04da38d6 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -13,8 +13,8 @@ int					nr_counters;
 struct perf_counter_attr		attrs[MAX_COUNTERS];
 
 struct event_symbol {
-	__u8	type;
-	__u64	config;
+	u8	type;
+	u64	config;
 	char	*symbol;
 };
 
@@ -63,8 +63,8 @@ static char *hw_event_names[] = {
 };
 
 static char *sw_event_names[] = {
-	"cpu-clock-ticks",
-	"task-clock-ticks",
+	"cpu-clock-msecs",
+	"task-clock-msecs",
 	"page-faults",
 	"context-switches",
 	"CPU-migrations",
@@ -96,7 +96,7 @@ static char *hw_cache_result [][MAX_ALIASES] = {
 
 char *event_name(int counter)
 {
-	__u64 config = attrs[counter].config;
+	u64 config = attrs[counter].config;
 	int type = attrs[counter].type;
 	static char buf[32];
 
@@ -112,7 +112,7 @@ char *event_name(int counter)
 		return "unknown-hardware";
 
 	case PERF_TYPE_HW_CACHE: {
-		__u8 cache_type, cache_op, cache_result;
+		u8 cache_type, cache_op, cache_result;
 		static char name[100];
 
 		cache_type   = (config >>  0) & 0xff;
@@ -202,7 +202,7 @@ static int parse_generic_hw_symbols(const char *str, struct perf_counter_attr *a
  */
 static int parse_event_symbols(const char *str, struct perf_counter_attr *attr)
 {
-	__u64 config, id;
+	u64 config, id;
 	int type;
 	unsigned int i;
 	const char *sep, *pstr;
diff --git a/tools/perf/util/string.c b/tools/perf/util/string.c
index ec33c0c7f4e..c93eca9a7be 100644
--- a/tools/perf/util/string.c
+++ b/tools/perf/util/string.c
@@ -15,7 +15,7 @@ static int hex(char ch)
  * While we find nice hex chars, build a long_val.
  * Return number of chars processed.
  */
-int hex2u64(const char *ptr, __u64 *long_val)
+int hex2u64(const char *ptr, u64 *long_val)
 {
 	const char *p = ptr;
 	*long_val = 0;
diff --git a/tools/perf/util/string.h b/tools/perf/util/string.h
index 72812c1c9a7..37b03255b42 100644
--- a/tools/perf/util/string.h
+++ b/tools/perf/util/string.h
@@ -1,8 +1,8 @@
 #ifndef _PERF_STRING_H_
 #define _PERF_STRING_H_
 
-#include <linux/types.h>
+#include "../types.h"
 
-int hex2u64(const char *ptr, __u64 *val);
+int hex2u64(const char *ptr, u64 *val);
 
 #endif
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 49a55f81371..86e14375e74 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -9,9 +9,9 @@
 
 const char *sym_hist_filter;
 
-static struct symbol *symbol__new(__u64 start, __u64 len,
+static struct symbol *symbol__new(u64 start, u64 len,
 				  const char *name, unsigned int priv_size,
-				  __u64 obj_start, int verbose)
+				  u64 obj_start, int verbose)
 {
 	size_t namelen = strlen(name) + 1;
 	struct symbol *self = calloc(1, priv_size + sizeof(*self) + namelen);
@@ -21,14 +21,14 @@ static struct symbol *symbol__new(__u64 start, __u64 len,
 
 	if (verbose >= 2)
 		printf("new symbol: %016Lx [%08lx]: %s, hist: %p, obj_start: %p\n",
-			(__u64)start, (unsigned long)len, name, self->hist, (void *)(unsigned long)obj_start);
+			(u64)start, (unsigned long)len, name, self->hist, (void *)(unsigned long)obj_start);
 
 	self->obj_start= obj_start;
 	self->hist = NULL;
 	self->hist_sum = 0;
 
 	if (sym_hist_filter && !strcmp(name, sym_hist_filter))
-		self->hist = calloc(sizeof(__u64), len);
+		self->hist = calloc(sizeof(u64), len);
 
 	if (priv_size) {
 		memset(self, 0, priv_size);
@@ -89,7 +89,7 @@ static void dso__insert_symbol(struct dso *self, struct symbol *sym)
 {
 	struct rb_node **p = &self->syms.rb_node;
 	struct rb_node *parent = NULL;
-	const __u64 ip = sym->start;
+	const u64 ip = sym->start;
 	struct symbol *s;
 
 	while (*p != NULL) {
@@ -104,7 +104,7 @@ static void dso__insert_symbol(struct dso *self, struct symbol *sym)
 	rb_insert_color(&sym->rb_node, &self->syms);
 }
 
-struct symbol *dso__find_symbol(struct dso *self, __u64 ip)
+struct symbol *dso__find_symbol(struct dso *self, u64 ip)
 {
 	struct rb_node *n;
 
@@ -151,7 +151,7 @@ static int dso__load_kallsyms(struct dso *self, symbol_filter_t filter, int verb
 		goto out_failure;
 
 	while (!feof(file)) {
-		__u64 start;
+		u64 start;
 		struct symbol *sym;
 		int line_len, len;
 		char symbol_type;
@@ -232,7 +232,7 @@ static int dso__load_perf_map(struct dso *self, symbol_filter_t filter, int verb
 		goto out_failure;
 
 	while (!feof(file)) {
-		__u64 start, size;
+		u64 start, size;
 		struct symbol *sym;
 		int line_len, len;
 
@@ -353,7 +353,7 @@ static int dso__synthesize_plt_symbols(struct  dso *self, Elf *elf,
 {
 	uint32_t nr_rel_entries, idx;
 	GElf_Sym sym;
-	__u64 plt_offset;
+	u64 plt_offset;
 	GElf_Shdr shdr_plt;
 	struct symbol *f;
 	GElf_Shdr shdr_rel_plt;
@@ -523,7 +523,7 @@ static int dso__load_sym(struct dso *self, int fd, const char *name,
 
 	elf_symtab__for_each_symbol(syms, nr_syms, index, sym) {
 		struct symbol *f;
-		__u64 obj_start;
+		u64 obj_start;
 
 		if (!elf_sym__is_function(&sym))
 			continue;
diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h
index 0d1292bd827..ea332e56e45 100644
--- a/tools/perf/util/symbol.h
+++ b/tools/perf/util/symbol.h
@@ -2,16 +2,18 @@
 #define _PERF_SYMBOL_ 1
 
 #include <linux/types.h>
+#include "../types.h"
 #include "list.h"
 #include "rbtree.h"
 
 struct symbol {
 	struct rb_node	rb_node;
-	__u64		start;
-	__u64		end;
-	__u64		obj_start;
-	__u64		hist_sum;
-	__u64		*hist;
+	u64		start;
+	u64		end;
+	u64		obj_start;
+	u64		hist_sum;
+	u64		*hist;
+	void		*priv;
 	char		name[0];
 };
 
@@ -19,7 +21,7 @@ struct dso {
 	struct list_head node;
 	struct rb_root	 syms;
 	unsigned int	 sym_priv_size;
-	struct symbol    *(*find_symbol)(struct dso *, __u64 ip);
+	struct symbol    *(*find_symbol)(struct dso *, u64 ip);
 	char		 name[0];
 };
 
@@ -35,7 +37,7 @@ static inline void *dso__sym_priv(struct dso *self, struct symbol *sym)
 	return ((void *)sym) - self->sym_priv_size;
 }
 
-struct symbol *dso__find_symbol(struct dso *self, __u64 ip);
+struct symbol *dso__find_symbol(struct dso *self, u64 ip);
 
 int dso__load_kernel(struct dso *self, const char *vmlinux,
 		     symbol_filter_t filter, int verbose);
diff --git a/tools/perf/util/util.h b/tools/perf/util/util.h
index 76590a16c27..b8cfed776d8 100644
--- a/tools/perf/util/util.h
+++ b/tools/perf/util/util.h
@@ -100,11 +100,6 @@
 #include <iconv.h>
 #endif
 
-#ifndef NO_OPENSSL
-#include <openssl/ssl.h>
-#include <openssl/err.h>
-#endif
-
 /* On most systems <limits.h> would have given us this, but
  * not on some systems (e.g. GNU/Hurd).
  */
@@ -332,17 +327,20 @@ static inline int has_extension(const char *filename, const char *ext)
 #undef tolower
 #undef toupper
 extern unsigned char sane_ctype[256];
-#define GIT_SPACE 0x01
-#define GIT_DIGIT 0x02
-#define GIT_ALPHA 0x04
-#define GIT_GLOB_SPECIAL 0x08
-#define GIT_REGEX_SPECIAL 0x10
+#define GIT_SPACE		0x01
+#define GIT_DIGIT		0x02
+#define GIT_ALPHA		0x04
+#define GIT_GLOB_SPECIAL	0x08
+#define GIT_REGEX_SPECIAL	0x10
+#define GIT_PRINT_EXTRA		0x20
+#define GIT_PRINT		0x3E
 #define sane_istest(x,mask) ((sane_ctype[(unsigned char)(x)] & (mask)) != 0)
 #define isascii(x) (((x) & ~0x7f) == 0)
 #define isspace(x) sane_istest(x,GIT_SPACE)
 #define isdigit(x) sane_istest(x,GIT_DIGIT)
 #define isalpha(x) sane_istest(x,GIT_ALPHA)
 #define isalnum(x) sane_istest(x,GIT_ALPHA | GIT_DIGIT)
+#define isprint(x) sane_istest(x,GIT_PRINT)
 #define is_glob_special(x) sane_istest(x,GIT_GLOB_SPECIAL)
 #define is_regex_special(x) sane_istest(x,GIT_GLOB_SPECIAL | GIT_REGEX_SPECIAL)
 #define tolower(x) sane_case((unsigned char)(x), 0x20)